extcon: arizona: Update cable reporting calls and split headset
Use extcon_set_state_ for performance and split the headset into separate
headphone and microphone reports as this is more idiomatic.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index b068bc9..0626754 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -54,22 +54,17 @@
{ 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
};
-#define ARIZONA_CABLE_MECHANICAL "Mechanical"
-#define ARIZONA_CABLE_HEADPHONE "Headphone"
-#define ARIZONA_CABLE_HEADSET "Headset"
+#define ARIZONA_CABLE_MECHANICAL 0
+#define ARIZONA_CABLE_MICROPHONE 1
+#define ARIZONA_CABLE_HEADPHONE 2
static const char *arizona_cable[] = {
- ARIZONA_CABLE_MECHANICAL,
- ARIZONA_CABLE_HEADSET,
- ARIZONA_CABLE_HEADPHONE,
+ "Mechanical",
+ "Microphone",
+ "Headphone",
NULL,
};
-static const u32 arizona_exclusions[] = {
- 0x6, /* Headphone and headset */
- 0,
-};
-
static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
{
struct arizona *arizona = info->arizona;
@@ -174,8 +169,11 @@
/* If we got a high impedence we should have a headset, report it. */
if (info->detecting && (val & 0x400)) {
- ret = extcon_set_cable_state(&info->edev,
- ARIZONA_CABLE_HEADSET, true);
+ ret = extcon_update_state(&info->edev,
+ 1 << ARIZONA_CABLE_MICROPHONE |
+ 1 << ARIZONA_CABLE_HEADPHONE,
+ 1 << ARIZONA_CABLE_MICROPHONE |
+ 1 << ARIZONA_CABLE_HEADPHONE);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
@@ -198,9 +196,9 @@
if (info->jack_flips >= info->micd_num_modes) {
dev_dbg(arizona->dev, "Detected headphone\n");
info->detecting = false;
- ret = extcon_set_cable_state(&info->edev,
- ARIZONA_CABLE_HEADPHONE,
- true);
+ ret = extcon_set_cable_state_(&info->edev,
+ ARIZONA_CABLE_HEADPHONE,
+ true);
if (ret != 0)
dev_err(arizona->dev,
"Headphone report failed: %d\n",
@@ -231,9 +229,9 @@
info->detecting = false;
arizona_stop_mic(info);
- ret = extcon_set_cable_state(&info->edev,
- ARIZONA_CABLE_HEADPHONE,
- true);
+ ret = extcon_set_cable_state_(&info->edev,
+ ARIZONA_CABLE_HEADPHONE,
+ true);
if (ret != 0)
dev_err(arizona->dev,
"Headphone report failed: %d\n",
@@ -275,8 +273,8 @@
if (val & ARIZONA_JD1_STS) {
dev_dbg(arizona->dev, "Detected jack\n");
- ret = extcon_set_cable_state(&info->edev,
- ARIZONA_CABLE_MECHANICAL, true);
+ ret = extcon_set_cable_state_(&info->edev,
+ ARIZONA_CABLE_MECHANICAL, true);
if (ret != 0)
dev_err(arizona->dev, "Mechanical report failed: %d\n",
@@ -347,7 +345,6 @@
info->edev.name = "Headset Jack";
info->edev.supported_cable = arizona_cable;
- info->edev.mutually_exclusive = arizona_exclusions;
ret = extcon_dev_register(&info->edev, arizona->dev);
if (ret < 0) {