| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef R819XUSB_CMDPKT_H |
| #define R819XUSB_CMDPKT_H |
| /* Different command packet have dedicated message length and definition. */ |
| #define CMPK_RX_TX_FB_SIZE sizeof(cmpk_txfb_t) /* 20 */ |
| #define CMPK_TX_SET_CONFIG_SIZE sizeof(cmpk_set_cfg_t) /* 16 */ |
| #define CMPK_BOTH_QUERY_CONFIG_SIZE sizeof(cmpk_set_cfg_t) /* 16 */ |
| #define CMPK_RX_TX_STS_SIZE sizeof(cmpk_tx_status_t) |
| #define CMPK_RX_DBG_MSG_SIZE sizeof(cmpk_rx_dbginfo_t) |
| #define CMPK_TX_RAHIS_SIZE sizeof(cmpk_tx_rahis_t) |
| |
| /* 2008/05/08 amy For USB constant. */ |
| #define ISR_TxBcnOk BIT(27) /* Transmit Beacon OK */ |
| #define ISR_TxBcnErr BIT(26) /* Transmit Beacon Error */ |
| #define ISR_BcnTimerIntr BIT(13) /* Beacon Timer Interrupt */ |
| |
| |
| /* Define element ID of command packet. */ |
| |
| /*------------------------------Define structure----------------------------*/ |
| /* Define different command packet structure. */ |
| /* 1. RX side: TX feedback packet. */ |
| typedef struct tag_cmd_pkt_tx_feedback { |
| /* DWORD 0 */ |
| u8 element_id; /* Command packet type. */ |
| u8 length; /* Command packet length. */ |
| /* Change tx feedback info field. */ |
| /*------TX Feedback Info Field */ |
| u8 TID:4; |
| u8 fail_reason:3; |
| u8 tok:1; /* Transmit ok. */ |
| u8 reserve1:4; |
| u8 pkt_type:2; |
| u8 bandwidth:1; |
| u8 qos_pkt:1; |
| |
| /* DWORD 1 */ |
| u8 reserve2; |
| /*------TX Feedback Info Field */ |
| u8 retry_cnt; |
| u16 pkt_id; |
| |
| /* DWORD 3 */ |
| u16 seq_num; |
| u8 s_rate; /* Start rate. */ |
| u8 f_rate; /* Final rate. */ |
| |
| /* DWORD 4 */ |
| u8 s_rts_rate; |
| u8 f_rts_rate; |
| u16 pkt_length; |
| |
| /* DWORD 5 */ |
| u16 reserve3; |
| u16 duration; |
| } cmpk_txfb_t; |
| |
| /* 2. RX side: Interrupt status packet. It includes Beacon State, |
| * Beacon Timer Interrupt and other useful informations in MAC ISR Reg. |
| */ |
| typedef struct tag_cmd_pkt_interrupt_status { |
| u8 element_id; /* Command packet type. */ |
| u8 length; /* Command packet length. */ |
| u16 reserve; |
| u32 interrupt_status; /* Interrupt Status. */ |
| } cmpk_intr_sta_t; |
| |
| |
| /* 3. TX side: Set configuration packet. */ |
| typedef struct tag_cmd_pkt_set_configuration { |
| u8 element_id; /* Command packet type. */ |
| u8 length; /* Command packet length. */ |
| u16 reserve1; |
| /* Configuration info. */ |
| u8 cfg_reserve1:3; |
| u8 cfg_size:2; |
| u8 cfg_type:2; |
| u8 cfg_action:1; |
| u8 cfg_reserve2; |
| u8 cfg_page:4; |
| u8 cfg_reserve3:4; |
| u8 cfg_offset; |
| u32 value; |
| u32 mask; |
| } cmpk_set_cfg_t; |
| |
| /* 4. Both side : TX/RX query configuraton packet. The query structure is the |
| * same as set configuration. |
| */ |
| #define cmpk_query_cfg_t cmpk_set_cfg_t |
| |
| /* 5. Multi packet feedback status. */ |
| typedef struct tag_tx_stats_feedback { |
| /* For endian transfer --> Driver will not the same as |
| * firmware structure. |
| */ |
| /* DW 0 */ |
| u16 reserve1; |
| u8 length; /* Command packet length */ |
| u8 element_id; /* Command packet type */ |
| |
| /* DW 1 */ |
| u16 txfail; /* Tx fail count */ |
| u16 txok; /* Tx ok count */ |
| |
| /* DW 2 */ |
| u16 txmcok; /* Tx multicast */ |
| u16 txretry; /* Tx retry count */ |
| |
| /* DW 3 */ |
| u16 txucok; /* Tx unicast */ |
| u16 txbcok; /* Tx broadcast */ |
| |
| /* DW 4 */ |
| u16 txbcfail; |
| u16 txmcfail; |
| |
| /* DW 5 */ |
| u16 reserve2; |
| u16 txucfail; |
| |
| /* DW 6-8 */ |
| u32 txmclength; |
| u32 txbclength; |
| u32 txuclength; |
| |
| /* DW 9 */ |
| u16 reserve3_23; |
| u8 reserve3_1; |
| u8 rate; |
| } __packed cmpk_tx_status_t; |
| |
| /* 6. Debug feedback message. */ |
| /* Define RX debug message */ |
| typedef struct tag_rx_debug_message_feedback { |
| /* For endian transfer --> for driver */ |
| /* DW 0 */ |
| u16 reserve1; |
| u8 length; /* Command packet length */ |
| u8 element_id; /* Command packet type */ |
| |
| /* DW 1-?? */ |
| /* Variable debug message. */ |
| |
| } cmpk_rx_dbginfo_t; |
| |
| /* Define transmit rate history. For big endian format. */ |
| typedef struct tag_tx_rate_history { |
| /* For endian transfer --> for driver */ |
| /* DW 0 */ |
| u8 element_id; /* Command packet type */ |
| u8 length; /* Command packet length */ |
| u16 reserved1; |
| |
| /* DW 1-2 CCK rate counter */ |
| u16 cck[4]; |
| |
| /* DW 3-6 */ |
| u16 ofdm[8]; |
| |
| /* DW 7-14 BW=0 SG=0 |
| * DW 15-22 BW=1 SG=0 |
| * DW 23-30 BW=0 SG=1 |
| * DW 31-38 BW=1 SG=1 |
| */ |
| u16 ht_mcs[4][16]; |
| |
| } __packed cmpk_tx_rahis_t; |
| |
| typedef enum tag_command_packet_directories { |
| RX_TX_FEEDBACK = 0, |
| RX_INTERRUPT_STATUS = 1, |
| TX_SET_CONFIG = 2, |
| BOTH_QUERY_CONFIG = 3, |
| RX_TX_STATUS = 4, |
| RX_DBGINFO_FEEDBACK = 5, |
| RX_TX_PER_PKT_FEEDBACK = 6, |
| RX_TX_RATE_HISTORY = 7, |
| RX_CMD_ELE_MAX |
| } cmpk_element_e; |
| |
| typedef enum _rt_status { |
| RT_STATUS_SUCCESS, |
| RT_STATUS_FAILURE, |
| RT_STATUS_PENDING, |
| RT_STATUS_RESOURCE |
| } rt_status, *prt_status; |
| |
| u32 cmpk_message_handle_rx(struct net_device *dev, |
| struct ieee80211_rx_stats *pstats); |
| rt_status SendTxCommandPacket(struct net_device *dev, |
| void *pData, u32 DataLen); |
| |
| |
| #endif |