| /* src/prism2/driver/hfa384x_usb.c |
| * |
| * Functions that talk to the USB variantof the Intersil hfa384x MAC |
| * |
| * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. |
| * -------------------------------------------------------------------- |
| * |
| * linux-wlan |
| * |
| * The contents of this file are subject to the Mozilla Public |
| * License Version 1.1 (the "License"); you may not use this file |
| * except in compliance with the License. You may obtain a copy of |
| * the License at http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS |
| * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| * implied. See the License for the specific language governing |
| * rights and limitations under the License. |
| * |
| * Alternatively, the contents of this file may be used under the |
| * terms of the GNU Public License version 2 (the "GPL"), in which |
| * case the provisions of the GPL are applicable instead of the |
| * above. If you wish to allow the use of your version of this file |
| * only under the terms of the GPL and not to allow others to use |
| * your version of this file under the MPL, indicate your decision |
| * by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL. If you do not delete |
| * the provisions above, a recipient may use your version of this |
| * file under either the MPL or the GPL. |
| * |
| * -------------------------------------------------------------------- |
| * |
| * Inquiries regarding the linux-wlan Open Source project can be |
| * made directly to: |
| * |
| * AbsoluteValue Systems Inc. |
| * info@linux-wlan.com |
| * http://www.linux-wlan.com |
| * |
| * -------------------------------------------------------------------- |
| * |
| * Portions of the development of this software were funded by |
| * Intersil Corporation as part of PRISM(R) chipset product development. |
| * |
| * -------------------------------------------------------------------- |
| * |
| * This file implements functions that correspond to the prism2/hfa384x |
| * 802.11 MAC hardware and firmware host interface. |
| * |
| * The functions can be considered to represent several levels of |
| * abstraction. The lowest level functions are simply C-callable wrappers |
| * around the register accesses. The next higher level represents C-callable |
| * prism2 API functions that match the Intersil documentation as closely |
| * as is reasonable. The next higher layer implements common sequences |
| * of invocations of the API layer (e.g. write to bap, followed by cmd). |
| * |
| * Common sequences: |
| * hfa384x_drvr_xxx Highest level abstractions provided by the |
| * hfa384x code. They are driver defined wrappers |
| * for common sequences. These functions generally |
| * use the services of the lower levels. |
| * |
| * hfa384x_drvr_xxxconfig An example of the drvr level abstraction. These |
| * functions are wrappers for the RID get/set |
| * sequence. They call copy_[to|from]_bap() and |
| * cmd_access(). These functions operate on the |
| * RIDs and buffers without validation. The caller |
| * is responsible for that. |
| * |
| * API wrapper functions: |
| * hfa384x_cmd_xxx functions that provide access to the f/w commands. |
| * The function arguments correspond to each command |
| * argument, even command arguments that get packed |
| * into single registers. These functions _just_ |
| * issue the command by setting the cmd/parm regs |
| * & reading the status/resp regs. Additional |
| * activities required to fully use a command |
| * (read/write from/to bap, get/set int status etc.) |
| * are implemented separately. Think of these as |
| * C-callable prism2 commands. |
| * |
| * Lowest Layer Functions: |
| * hfa384x_docmd_xxx These functions implement the sequence required |
| * to issue any prism2 command. Primarily used by the |
| * hfa384x_cmd_xxx functions. |
| * |
| * hfa384x_bap_xxx BAP read/write access functions. |
| * Note: we usually use BAP0 for non-interrupt context |
| * and BAP1 for interrupt context. |
| * |
| * hfa384x_dl_xxx download related functions. |
| * |
| * Driver State Issues: |
| * Note that there are two pairs of functions that manage the |
| * 'initialized' and 'running' states of the hw/MAC combo. The four |
| * functions are create(), destroy(), start(), and stop(). create() |
| * sets up the data structures required to support the hfa384x_* |
| * functions and destroy() cleans them up. The start() function gets |
| * the actual hardware running and enables the interrupts. The stop() |
| * function shuts the hardware down. The sequence should be: |
| * create() |
| * start() |
| * . |
| * . Do interesting things w/ the hardware |
| * . |
| * stop() |
| * destroy() |
| * |
| * Note that destroy() can be called without calling stop() first. |
| * -------------------------------------------------------------------- |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/wireless.h> |
| #include <linux/netdevice.h> |
| #include <linux/timer.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <asm/byteorder.h> |
| #include <linux/bitops.h> |
| #include <linux/list.h> |
| #include <linux/usb.h> |
| #include <linux/byteorder/generic.h> |
| |
| #include "p80211types.h" |
| #include "p80211hdr.h" |
| #include "p80211mgmt.h" |
| #include "p80211conv.h" |
| #include "p80211msg.h" |
| #include "p80211netdev.h" |
| #include "p80211req.h" |
| #include "p80211metadef.h" |
| #include "p80211metastruct.h" |
| #include "hfa384x.h" |
| #include "prism2mgmt.h" |
| |
| enum cmd_mode { |
| DOWAIT = 0, |
| DOASYNC |
| }; |
| |
| #define THROTTLE_JIFFIES (HZ / 8) |
| #define URB_ASYNC_UNLINK 0 |
| #define USB_QUEUE_BULK 0 |
| |
| #define ROUNDUP64(a) (((a) + 63) & ~63) |
| |
| #ifdef DEBUG_USB |
| static void dbprint_urb(struct urb *urb); |
| #endif |
| |
| static void hfa384x_int_rxmonitor(struct wlandevice *wlandev, |
| struct hfa384x_usb_rxfrm *rxfrm); |
| |
| static void hfa384x_usb_defer(struct work_struct *data); |
| |
| static int submit_rx_urb(struct hfa384x *hw, gfp_t flags); |
| |
| static int submit_tx_urb(struct hfa384x *hw, struct urb *tx_urb, gfp_t flags); |
| |
| /*---------------------------------------------------*/ |
| /* Callbacks */ |
| static void hfa384x_usbout_callback(struct urb *urb); |
| static void hfa384x_ctlxout_callback(struct urb *urb); |
| static void hfa384x_usbin_callback(struct urb *urb); |
| |
| static void |
| hfa384x_usbin_txcompl(struct wlandevice *wlandev, union hfa384x_usbin *usbin); |
| |
| static void hfa384x_usbin_rx(struct wlandevice *wlandev, struct sk_buff *skb); |
| |
| static void hfa384x_usbin_info(struct wlandevice *wlandev, |
| union hfa384x_usbin *usbin); |
| |
| static void hfa384x_usbin_ctlx(struct hfa384x *hw, union hfa384x_usbin *usbin, |
| int urb_status); |
| |
| /*---------------------------------------------------*/ |
| /* Functions to support the prism2 usb command queue */ |
| |
| static void hfa384x_usbctlxq_run(struct hfa384x *hw); |
| |
| static void hfa384x_usbctlx_reqtimerfn(unsigned long data); |
| |
| static void hfa384x_usbctlx_resptimerfn(unsigned long data); |
| |
| static void hfa384x_usb_throttlefn(unsigned long data); |
| |
| static void hfa384x_usbctlx_completion_task(unsigned long data); |
| |
| static void hfa384x_usbctlx_reaper_task(unsigned long data); |
| |
| static int hfa384x_usbctlx_submit(struct hfa384x *hw, |
| struct hfa384x_usbctlx *ctlx); |
| |
| static void unlocked_usbctlx_complete(struct hfa384x *hw, |
| struct hfa384x_usbctlx *ctlx); |
| |
| struct usbctlx_completor { |
| int (*complete)(struct usbctlx_completor *); |
| }; |
| |
| static int |
| hfa384x_usbctlx_complete_sync(struct hfa384x *hw, |
| struct hfa384x_usbctlx *ctlx, |
| struct usbctlx_completor *completor); |
| |
| static int |
| unlocked_usbctlx_cancel_async(struct hfa384x *hw, struct hfa384x_usbctlx *ctlx); |
| |
| static void hfa384x_cb_status(struct hfa384x *hw, |
| const struct hfa384x_usbctlx *ctlx); |
| |
| static int |
| usbctlx_get_status(const struct hfa384x_usb_statusresp *cmdresp, |
| struct hfa384x_cmdresult *result); |
| |
| static void |
| usbctlx_get_rridresult(const struct hfa384x_usb_rridresp *rridresp, |
| struct hfa384x_rridresult *result); |
| |
| /*---------------------------------------------------*/ |
| /* Low level req/resp CTLX formatters and submitters */ |
| static int |
| hfa384x_docmd(struct hfa384x *hw, |
| enum cmd_mode mode, |
| struct hfa384x_metacmd *cmd, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data); |
| |
| static int |
| hfa384x_dorrid(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 rid, |
| void *riddata, |
| unsigned int riddatalen, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data); |
| |
| static int |
| hfa384x_dowrid(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 rid, |
| void *riddata, |
| unsigned int riddatalen, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data); |
| |
| static int |
| hfa384x_dormem(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 page, |
| u16 offset, |
| void *data, |
| unsigned int len, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data); |
| |
| static int |
| hfa384x_dowmem(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 page, |
| u16 offset, |
| void *data, |
| unsigned int len, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data); |
| |
| static int hfa384x_isgood_pdrcode(u16 pdrcode); |
| |
| static inline const char *ctlxstr(enum ctlx_state s) |
| { |
| static const char * const ctlx_str[] = { |
| "Initial state", |
| "Complete", |
| "Request failed", |
| "Request pending", |
| "Request packet submitted", |
| "Request packet completed", |
| "Response packet completed" |
| }; |
| |
| return ctlx_str[s]; |
| }; |
| |
| static inline struct hfa384x_usbctlx *get_active_ctlx(struct hfa384x *hw) |
| { |
| return list_entry(hw->ctlxq.active.next, struct hfa384x_usbctlx, list); |
| } |
| |
| #ifdef DEBUG_USB |
| void dbprint_urb(struct urb *urb) |
| { |
| pr_debug("urb->pipe=0x%08x\n", urb->pipe); |
| pr_debug("urb->status=0x%08x\n", urb->status); |
| pr_debug("urb->transfer_flags=0x%08x\n", urb->transfer_flags); |
| pr_debug("urb->transfer_buffer=0x%08x\n", |
| (unsigned int)urb->transfer_buffer); |
| pr_debug("urb->transfer_buffer_length=0x%08x\n", |
| urb->transfer_buffer_length); |
| pr_debug("urb->actual_length=0x%08x\n", urb->actual_length); |
| pr_debug("urb->bandwidth=0x%08x\n", urb->bandwidth); |
| pr_debug("urb->setup_packet(ctl)=0x%08x\n", |
| (unsigned int)urb->setup_packet); |
| pr_debug("urb->start_frame(iso/irq)=0x%08x\n", urb->start_frame); |
| pr_debug("urb->interval(irq)=0x%08x\n", urb->interval); |
| pr_debug("urb->error_count(iso)=0x%08x\n", urb->error_count); |
| pr_debug("urb->timeout=0x%08x\n", urb->timeout); |
| pr_debug("urb->context=0x%08x\n", (unsigned int)urb->context); |
| pr_debug("urb->complete=0x%08x\n", (unsigned int)urb->complete); |
| } |
| #endif |
| |
| /*---------------------------------------------------------------- |
| * submit_rx_urb |
| * |
| * Listen for input data on the BULK-IN pipe. If the pipe has |
| * stalled then schedule it to be reset. |
| * |
| * Arguments: |
| * hw device struct |
| * memflags memory allocation flags |
| * |
| * Returns: |
| * error code from submission |
| * |
| * Call context: |
| * Any |
| *---------------------------------------------------------------- |
| */ |
| static int submit_rx_urb(struct hfa384x *hw, gfp_t memflags) |
| { |
| struct sk_buff *skb; |
| int result; |
| |
| skb = dev_alloc_skb(sizeof(union hfa384x_usbin)); |
| if (!skb) { |
| result = -ENOMEM; |
| goto done; |
| } |
| |
| /* Post the IN urb */ |
| usb_fill_bulk_urb(&hw->rx_urb, hw->usb, |
| hw->endp_in, |
| skb->data, sizeof(union hfa384x_usbin), |
| hfa384x_usbin_callback, hw->wlandev); |
| |
| hw->rx_urb_skb = skb; |
| |
| result = -ENOLINK; |
| if (!hw->wlandev->hwremoved && |
| !test_bit(WORK_RX_HALT, &hw->usb_flags)) { |
| result = usb_submit_urb(&hw->rx_urb, memflags); |
| |
| /* Check whether we need to reset the RX pipe */ |
| if (result == -EPIPE) { |
| netdev_warn(hw->wlandev->netdev, |
| "%s rx pipe stalled: requesting reset\n", |
| hw->wlandev->netdev->name); |
| if (!test_and_set_bit(WORK_RX_HALT, &hw->usb_flags)) |
| schedule_work(&hw->usb_work); |
| } |
| } |
| |
| /* Don't leak memory if anything should go wrong */ |
| if (result != 0) { |
| dev_kfree_skb(skb); |
| hw->rx_urb_skb = NULL; |
| } |
| |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * submit_tx_urb |
| * |
| * Prepares and submits the URB of transmitted data. If the |
| * submission fails then it will schedule the output pipe to |
| * be reset. |
| * |
| * Arguments: |
| * hw device struct |
| * tx_urb URB of data for transmission |
| * memflags memory allocation flags |
| * |
| * Returns: |
| * error code from submission |
| * |
| * Call context: |
| * Any |
| *---------------------------------------------------------------- |
| */ |
| static int submit_tx_urb(struct hfa384x *hw, struct urb *tx_urb, gfp_t memflags) |
| { |
| struct net_device *netdev = hw->wlandev->netdev; |
| int result; |
| |
| result = -ENOLINK; |
| if (netif_running(netdev)) { |
| if (!hw->wlandev->hwremoved && |
| !test_bit(WORK_TX_HALT, &hw->usb_flags)) { |
| result = usb_submit_urb(tx_urb, memflags); |
| |
| /* Test whether we need to reset the TX pipe */ |
| if (result == -EPIPE) { |
| netdev_warn(hw->wlandev->netdev, |
| "%s tx pipe stalled: requesting reset\n", |
| netdev->name); |
| set_bit(WORK_TX_HALT, &hw->usb_flags); |
| schedule_work(&hw->usb_work); |
| } else if (result == 0) { |
| netif_stop_queue(netdev); |
| } |
| } |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa394x_usb_defer |
| * |
| * There are some things that the USB stack cannot do while |
| * in interrupt context, so we arrange this function to run |
| * in process context. |
| * |
| * Arguments: |
| * hw device structure |
| * |
| * Returns: |
| * nothing |
| * |
| * Call context: |
| * process (by design) |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usb_defer(struct work_struct *data) |
| { |
| struct hfa384x *hw = container_of(data, struct hfa384x, usb_work); |
| struct net_device *netdev = hw->wlandev->netdev; |
| |
| /* Don't bother trying to reset anything if the plug |
| * has been pulled ... |
| */ |
| if (hw->wlandev->hwremoved) |
| return; |
| |
| /* Reception has stopped: try to reset the input pipe */ |
| if (test_bit(WORK_RX_HALT, &hw->usb_flags)) { |
| int ret; |
| |
| usb_kill_urb(&hw->rx_urb); /* Cannot be holding spinlock! */ |
| |
| ret = usb_clear_halt(hw->usb, hw->endp_in); |
| if (ret != 0) { |
| netdev_err(hw->wlandev->netdev, |
| "Failed to clear rx pipe for %s: err=%d\n", |
| netdev->name, ret); |
| } else { |
| netdev_info(hw->wlandev->netdev, "%s rx pipe reset complete.\n", |
| netdev->name); |
| clear_bit(WORK_RX_HALT, &hw->usb_flags); |
| set_bit(WORK_RX_RESUME, &hw->usb_flags); |
| } |
| } |
| |
| /* Resume receiving data back from the device. */ |
| if (test_bit(WORK_RX_RESUME, &hw->usb_flags)) { |
| int ret; |
| |
| ret = submit_rx_urb(hw, GFP_KERNEL); |
| if (ret != 0) { |
| netdev_err(hw->wlandev->netdev, |
| "Failed to resume %s rx pipe.\n", |
| netdev->name); |
| } else { |
| clear_bit(WORK_RX_RESUME, &hw->usb_flags); |
| } |
| } |
| |
| /* Transmission has stopped: try to reset the output pipe */ |
| if (test_bit(WORK_TX_HALT, &hw->usb_flags)) { |
| int ret; |
| |
| usb_kill_urb(&hw->tx_urb); |
| ret = usb_clear_halt(hw->usb, hw->endp_out); |
| if (ret != 0) { |
| netdev_err(hw->wlandev->netdev, |
| "Failed to clear tx pipe for %s: err=%d\n", |
| netdev->name, ret); |
| } else { |
| netdev_info(hw->wlandev->netdev, "%s tx pipe reset complete.\n", |
| netdev->name); |
| clear_bit(WORK_TX_HALT, &hw->usb_flags); |
| set_bit(WORK_TX_RESUME, &hw->usb_flags); |
| |
| /* Stopping the BULK-OUT pipe also blocked |
| * us from sending any more CTLX URBs, so |
| * we need to re-run our queue ... |
| */ |
| hfa384x_usbctlxq_run(hw); |
| } |
| } |
| |
| /* Resume transmitting. */ |
| if (test_and_clear_bit(WORK_TX_RESUME, &hw->usb_flags)) |
| netif_wake_queue(hw->wlandev->netdev); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_create |
| * |
| * Sets up the struct hfa384x data structure for use. Note this |
| * does _not_ initialize the actual hardware, just the data structures |
| * we use to keep track of its state. |
| * |
| * Arguments: |
| * hw device structure |
| * irq device irq number |
| * iobase i/o base address for register access |
| * membase memory base address for register access |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| void hfa384x_create(struct hfa384x *hw, struct usb_device *usb) |
| { |
| memset(hw, 0, sizeof(*hw)); |
| hw->usb = usb; |
| |
| /* set up the endpoints */ |
| hw->endp_in = usb_rcvbulkpipe(usb, 1); |
| hw->endp_out = usb_sndbulkpipe(usb, 2); |
| |
| /* Set up the waitq */ |
| init_waitqueue_head(&hw->cmdq); |
| |
| /* Initialize the command queue */ |
| spin_lock_init(&hw->ctlxq.lock); |
| INIT_LIST_HEAD(&hw->ctlxq.pending); |
| INIT_LIST_HEAD(&hw->ctlxq.active); |
| INIT_LIST_HEAD(&hw->ctlxq.completing); |
| INIT_LIST_HEAD(&hw->ctlxq.reapable); |
| |
| /* Initialize the authentication queue */ |
| skb_queue_head_init(&hw->authq); |
| |
| tasklet_init(&hw->reaper_bh, |
| hfa384x_usbctlx_reaper_task, (unsigned long)hw); |
| tasklet_init(&hw->completion_bh, |
| hfa384x_usbctlx_completion_task, (unsigned long)hw); |
| INIT_WORK(&hw->link_bh, prism2sta_processing_defer); |
| INIT_WORK(&hw->usb_work, hfa384x_usb_defer); |
| |
| setup_timer(&hw->throttle, hfa384x_usb_throttlefn, (unsigned long)hw); |
| |
| setup_timer(&hw->resptimer, hfa384x_usbctlx_resptimerfn, |
| (unsigned long)hw); |
| |
| setup_timer(&hw->reqtimer, hfa384x_usbctlx_reqtimerfn, |
| (unsigned long)hw); |
| |
| usb_init_urb(&hw->rx_urb); |
| usb_init_urb(&hw->tx_urb); |
| usb_init_urb(&hw->ctlx_urb); |
| |
| hw->link_status = HFA384x_LINK_NOTCONNECTED; |
| hw->state = HFA384x_STATE_INIT; |
| |
| INIT_WORK(&hw->commsqual_bh, prism2sta_commsqual_defer); |
| setup_timer(&hw->commsqual_timer, prism2sta_commsqual_timer, |
| (unsigned long)hw); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_destroy |
| * |
| * Partner to hfa384x_create(). This function cleans up the hw |
| * structure so that it can be freed by the caller using a simple |
| * kfree. Currently, this function is just a placeholder. If, at some |
| * point in the future, an hw in the 'shutdown' state requires a 'deep' |
| * kfree, this is where it should be done. Note that if this function |
| * is called on a _running_ hw structure, the drvr_stop() function is |
| * called. |
| * |
| * Arguments: |
| * hw device structure |
| * |
| * Returns: |
| * nothing, this function is not allowed to fail. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| void hfa384x_destroy(struct hfa384x *hw) |
| { |
| struct sk_buff *skb; |
| |
| if (hw->state == HFA384x_STATE_RUNNING) |
| hfa384x_drvr_stop(hw); |
| hw->state = HFA384x_STATE_PREINIT; |
| |
| kfree(hw->scanresults); |
| hw->scanresults = NULL; |
| |
| /* Now to clean out the auth queue */ |
| while ((skb = skb_dequeue(&hw->authq))) |
| dev_kfree_skb(skb); |
| } |
| |
| static struct hfa384x_usbctlx *usbctlx_alloc(void) |
| { |
| struct hfa384x_usbctlx *ctlx; |
| |
| ctlx = kzalloc(sizeof(*ctlx), |
| in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); |
| if (ctlx) |
| init_completion(&ctlx->done); |
| |
| return ctlx; |
| } |
| |
| static int |
| usbctlx_get_status(const struct hfa384x_usb_statusresp *cmdresp, |
| struct hfa384x_cmdresult *result) |
| { |
| result->status = le16_to_cpu(cmdresp->status); |
| result->resp0 = le16_to_cpu(cmdresp->resp0); |
| result->resp1 = le16_to_cpu(cmdresp->resp1); |
| result->resp2 = le16_to_cpu(cmdresp->resp2); |
| |
| pr_debug("cmdresult:status=0x%04x resp0=0x%04x resp1=0x%04x resp2=0x%04x\n", |
| result->status, result->resp0, result->resp1, result->resp2); |
| |
| return result->status & HFA384x_STATUS_RESULT; |
| } |
| |
| static void |
| usbctlx_get_rridresult(const struct hfa384x_usb_rridresp *rridresp, |
| struct hfa384x_rridresult *result) |
| { |
| result->rid = le16_to_cpu(rridresp->rid); |
| result->riddata = rridresp->data; |
| result->riddata_len = ((le16_to_cpu(rridresp->frmlen) - 1) * 2); |
| } |
| |
| /*---------------------------------------------------------------- |
| * Completor object: |
| * This completor must be passed to hfa384x_usbctlx_complete_sync() |
| * when processing a CTLX that returns a struct hfa384x_cmdresult structure. |
| *---------------------------------------------------------------- |
| */ |
| struct usbctlx_cmd_completor { |
| struct usbctlx_completor head; |
| |
| const struct hfa384x_usb_statusresp *cmdresp; |
| struct hfa384x_cmdresult *result; |
| }; |
| |
| static inline int usbctlx_cmd_completor_fn(struct usbctlx_completor *head) |
| { |
| struct usbctlx_cmd_completor *complete; |
| |
| complete = (struct usbctlx_cmd_completor *)head; |
| return usbctlx_get_status(complete->cmdresp, complete->result); |
| } |
| |
| static inline struct usbctlx_completor * |
| init_cmd_completor(struct usbctlx_cmd_completor *completor, |
| const struct hfa384x_usb_statusresp *cmdresp, |
| struct hfa384x_cmdresult *result) |
| { |
| completor->head.complete = usbctlx_cmd_completor_fn; |
| completor->cmdresp = cmdresp; |
| completor->result = result; |
| return &completor->head; |
| } |
| |
| /*---------------------------------------------------------------- |
| * Completor object: |
| * This completor must be passed to hfa384x_usbctlx_complete_sync() |
| * when processing a CTLX that reads a RID. |
| *---------------------------------------------------------------- |
| */ |
| struct usbctlx_rrid_completor { |
| struct usbctlx_completor head; |
| |
| const struct hfa384x_usb_rridresp *rridresp; |
| void *riddata; |
| unsigned int riddatalen; |
| }; |
| |
| static int usbctlx_rrid_completor_fn(struct usbctlx_completor *head) |
| { |
| struct usbctlx_rrid_completor *complete; |
| struct hfa384x_rridresult rridresult; |
| |
| complete = (struct usbctlx_rrid_completor *)head; |
| usbctlx_get_rridresult(complete->rridresp, &rridresult); |
| |
| /* Validate the length, note body len calculation in bytes */ |
| if (rridresult.riddata_len != complete->riddatalen) { |
| pr_warn("RID len mismatch, rid=0x%04x hlen=%d fwlen=%d\n", |
| rridresult.rid, |
| complete->riddatalen, rridresult.riddata_len); |
| return -ENODATA; |
| } |
| |
| memcpy(complete->riddata, rridresult.riddata, complete->riddatalen); |
| return 0; |
| } |
| |
| static inline struct usbctlx_completor * |
| init_rrid_completor(struct usbctlx_rrid_completor *completor, |
| const struct hfa384x_usb_rridresp *rridresp, |
| void *riddata, |
| unsigned int riddatalen) |
| { |
| completor->head.complete = usbctlx_rrid_completor_fn; |
| completor->rridresp = rridresp; |
| completor->riddata = riddata; |
| completor->riddatalen = riddatalen; |
| return &completor->head; |
| } |
| |
| /*---------------------------------------------------------------- |
| * Completor object: |
| * Interprets the results of a synchronous RID-write |
| *---------------------------------------------------------------- |
| */ |
| #define init_wrid_completor init_cmd_completor |
| |
| /*---------------------------------------------------------------- |
| * Completor object: |
| * Interprets the results of a synchronous memory-write |
| *---------------------------------------------------------------- |
| */ |
| #define init_wmem_completor init_cmd_completor |
| |
| /*---------------------------------------------------------------- |
| * Completor object: |
| * Interprets the results of a synchronous memory-read |
| *---------------------------------------------------------------- |
| */ |
| struct usbctlx_rmem_completor { |
| struct usbctlx_completor head; |
| |
| const struct hfa384x_usb_rmemresp *rmemresp; |
| void *data; |
| unsigned int len; |
| }; |
| |
| static int usbctlx_rmem_completor_fn(struct usbctlx_completor *head) |
| { |
| struct usbctlx_rmem_completor *complete = |
| (struct usbctlx_rmem_completor *)head; |
| |
| pr_debug("rmemresp:len=%d\n", complete->rmemresp->frmlen); |
| memcpy(complete->data, complete->rmemresp->data, complete->len); |
| return 0; |
| } |
| |
| static inline struct usbctlx_completor * |
| init_rmem_completor(struct usbctlx_rmem_completor *completor, |
| struct hfa384x_usb_rmemresp *rmemresp, |
| void *data, |
| unsigned int len) |
| { |
| completor->head.complete = usbctlx_rmem_completor_fn; |
| completor->rmemresp = rmemresp; |
| completor->data = data; |
| completor->len = len; |
| return &completor->head; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_cb_status |
| * |
| * Ctlx_complete handler for async CMD type control exchanges. |
| * mark the hw struct as such. |
| * |
| * Note: If the handling is changed here, it should probably be |
| * changed in docmd as well. |
| * |
| * Arguments: |
| * hw hw struct |
| * ctlx completed CTLX |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_cb_status(struct hfa384x *hw, |
| const struct hfa384x_usbctlx *ctlx) |
| { |
| if (ctlx->usercb) { |
| struct hfa384x_cmdresult cmdresult; |
| |
| if (ctlx->state != CTLX_COMPLETE) { |
| memset(&cmdresult, 0, sizeof(cmdresult)); |
| cmdresult.status = |
| HFA384x_STATUS_RESULT_SET(HFA384x_CMD_ERR); |
| } else { |
| usbctlx_get_status(&ctlx->inbuf.cmdresp, &cmdresult); |
| } |
| |
| ctlx->usercb(hw, &cmdresult, ctlx->usercb_data); |
| } |
| } |
| |
| static inline int hfa384x_docmd_wait(struct hfa384x *hw, |
| struct hfa384x_metacmd *cmd) |
| { |
| return hfa384x_docmd(hw, DOWAIT, cmd, NULL, NULL, NULL); |
| } |
| |
| static inline int |
| hfa384x_docmd_async(struct hfa384x *hw, |
| struct hfa384x_metacmd *cmd, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data) |
| { |
| return hfa384x_docmd(hw, DOASYNC, cmd, cmdcb, usercb, usercb_data); |
| } |
| |
| static inline int |
| hfa384x_dorrid_wait(struct hfa384x *hw, u16 rid, void *riddata, |
| unsigned int riddatalen) |
| { |
| return hfa384x_dorrid(hw, DOWAIT, |
| rid, riddata, riddatalen, NULL, NULL, NULL); |
| } |
| |
| static inline int |
| hfa384x_dorrid_async(struct hfa384x *hw, |
| u16 rid, void *riddata, unsigned int riddatalen, |
| ctlx_cmdcb_t cmdcb, |
| ctlx_usercb_t usercb, void *usercb_data) |
| { |
| return hfa384x_dorrid(hw, DOASYNC, |
| rid, riddata, riddatalen, |
| cmdcb, usercb, usercb_data); |
| } |
| |
| static inline int |
| hfa384x_dowrid_wait(struct hfa384x *hw, u16 rid, void *riddata, |
| unsigned int riddatalen) |
| { |
| return hfa384x_dowrid(hw, DOWAIT, |
| rid, riddata, riddatalen, NULL, NULL, NULL); |
| } |
| |
| static inline int |
| hfa384x_dowrid_async(struct hfa384x *hw, |
| u16 rid, void *riddata, unsigned int riddatalen, |
| ctlx_cmdcb_t cmdcb, |
| ctlx_usercb_t usercb, void *usercb_data) |
| { |
| return hfa384x_dowrid(hw, DOASYNC, |
| rid, riddata, riddatalen, |
| cmdcb, usercb, usercb_data); |
| } |
| |
| static inline int |
| hfa384x_dormem_wait(struct hfa384x *hw, |
| u16 page, u16 offset, void *data, unsigned int len) |
| { |
| return hfa384x_dormem(hw, DOWAIT, |
| page, offset, data, len, NULL, NULL, NULL); |
| } |
| |
| static inline int |
| hfa384x_dormem_async(struct hfa384x *hw, |
| u16 page, u16 offset, void *data, unsigned int len, |
| ctlx_cmdcb_t cmdcb, |
| ctlx_usercb_t usercb, void *usercb_data) |
| { |
| return hfa384x_dormem(hw, DOASYNC, |
| page, offset, data, len, |
| cmdcb, usercb, usercb_data); |
| } |
| |
| static inline int |
| hfa384x_dowmem_wait(struct hfa384x *hw, |
| u16 page, u16 offset, void *data, unsigned int len) |
| { |
| return hfa384x_dowmem(hw, DOWAIT, |
| page, offset, data, len, NULL, NULL, NULL); |
| } |
| |
| static inline int |
| hfa384x_dowmem_async(struct hfa384x *hw, |
| u16 page, |
| u16 offset, |
| void *data, |
| unsigned int len, |
| ctlx_cmdcb_t cmdcb, |
| ctlx_usercb_t usercb, void *usercb_data) |
| { |
| return hfa384x_dowmem(hw, DOASYNC, |
| page, offset, data, len, |
| cmdcb, usercb, usercb_data); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_cmd_initialize |
| * |
| * Issues the initialize command and sets the hw->state based |
| * on the result. |
| * |
| * Arguments: |
| * hw device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_cmd_initialize(struct hfa384x *hw) |
| { |
| int result = 0; |
| int i; |
| struct hfa384x_metacmd cmd; |
| |
| cmd.cmd = HFA384x_CMDCODE_INIT; |
| cmd.parm0 = 0; |
| cmd.parm1 = 0; |
| cmd.parm2 = 0; |
| |
| result = hfa384x_docmd_wait(hw, &cmd); |
| |
| pr_debug("cmdresp.init: status=0x%04x, resp0=0x%04x, resp1=0x%04x, resp2=0x%04x\n", |
| cmd.result.status, |
| cmd.result.resp0, cmd.result.resp1, cmd.result.resp2); |
| if (result == 0) { |
| for (i = 0; i < HFA384x_NUMPORTS_MAX; i++) |
| hw->port_enabled[i] = 0; |
| } |
| |
| hw->link_status = HFA384x_LINK_NOTCONNECTED; |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_cmd_disable |
| * |
| * Issues the disable command to stop communications on one of |
| * the MACs 'ports'. |
| * |
| * Arguments: |
| * hw device structure |
| * macport MAC port number (host order) |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported failure - f/w status code |
| * <0 driver reported error (timeout|bad arg) |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_cmd_disable(struct hfa384x *hw, u16 macport) |
| { |
| struct hfa384x_metacmd cmd; |
| |
| cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) | |
| HFA384x_CMD_MACPORT_SET(macport); |
| cmd.parm0 = 0; |
| cmd.parm1 = 0; |
| cmd.parm2 = 0; |
| |
| return hfa384x_docmd_wait(hw, &cmd); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_cmd_enable |
| * |
| * Issues the enable command to enable communications on one of |
| * the MACs 'ports'. |
| * |
| * Arguments: |
| * hw device structure |
| * macport MAC port number |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported failure - f/w status code |
| * <0 driver reported error (timeout|bad arg) |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_cmd_enable(struct hfa384x *hw, u16 macport) |
| { |
| struct hfa384x_metacmd cmd; |
| |
| cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) | |
| HFA384x_CMD_MACPORT_SET(macport); |
| cmd.parm0 = 0; |
| cmd.parm1 = 0; |
| cmd.parm2 = 0; |
| |
| return hfa384x_docmd_wait(hw, &cmd); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_cmd_monitor |
| * |
| * Enables the 'monitor mode' of the MAC. Here's the description of |
| * monitor mode that I've received thus far: |
| * |
| * "The "monitor mode" of operation is that the MAC passes all |
| * frames for which the PLCP checks are correct. All received |
| * MPDUs are passed to the host with MAC Port = 7, with a |
| * receive status of good, FCS error, or undecryptable. Passing |
| * certain MPDUs is a violation of the 802.11 standard, but useful |
| * for a debugging tool." Normal communication is not possible |
| * while monitor mode is enabled. |
| * |
| * Arguments: |
| * hw device structure |
| * enable a code (0x0b|0x0f) that enables/disables |
| * monitor mode. (host order) |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported failure - f/w status code |
| * <0 driver reported error (timeout|bad arg) |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_cmd_monitor(struct hfa384x *hw, u16 enable) |
| { |
| struct hfa384x_metacmd cmd; |
| |
| cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) | |
| HFA384x_CMD_AINFO_SET(enable); |
| cmd.parm0 = 0; |
| cmd.parm1 = 0; |
| cmd.parm2 = 0; |
| |
| return hfa384x_docmd_wait(hw, &cmd); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_cmd_download |
| * |
| * Sets the controls for the MAC controller code/data download |
| * process. The arguments set the mode and address associated |
| * with a download. Note that the aux registers should be enabled |
| * prior to setting one of the download enable modes. |
| * |
| * Arguments: |
| * hw device structure |
| * mode 0 - Disable programming and begin code exec |
| * 1 - Enable volatile mem programming |
| * 2 - Enable non-volatile mem programming |
| * 3 - Program non-volatile section from NV download |
| * buffer. |
| * (host order) |
| * lowaddr |
| * highaddr For mode 1, sets the high & low order bits of |
| * the "destination address". This address will be |
| * the execution start address when download is |
| * subsequently disabled. |
| * For mode 2, sets the high & low order bits of |
| * the destination in NV ram. |
| * For modes 0 & 3, should be zero. (host order) |
| * NOTE: these are CMD format. |
| * codelen Length of the data to write in mode 2, |
| * zero otherwise. (host order) |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported failure - f/w status code |
| * <0 driver reported error (timeout|bad arg) |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_cmd_download(struct hfa384x *hw, u16 mode, u16 lowaddr, |
| u16 highaddr, u16 codelen) |
| { |
| struct hfa384x_metacmd cmd; |
| |
| pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n", |
| mode, lowaddr, highaddr, codelen); |
| |
| cmd.cmd = (HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DOWNLD) | |
| HFA384x_CMD_PROGMODE_SET(mode)); |
| |
| cmd.parm0 = lowaddr; |
| cmd.parm1 = highaddr; |
| cmd.parm2 = codelen; |
| |
| return hfa384x_docmd_wait(hw, &cmd); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_corereset |
| * |
| * Perform a reset of the hfa38xx MAC core. We assume that the hw |
| * structure is in its "created" state. That is, it is initialized |
| * with proper values. Note that if a reset is done after the |
| * device has been active for awhile, the caller might have to clean |
| * up some leftover cruft in the hw structure. |
| * |
| * Arguments: |
| * hw device structure |
| * holdtime how long (in ms) to hold the reset |
| * settletime how long (in ms) to wait after releasing |
| * the reset |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_corereset(struct hfa384x *hw, int holdtime, |
| int settletime, int genesis) |
| { |
| int result; |
| |
| result = usb_reset_device(hw->usb); |
| if (result < 0) { |
| netdev_err(hw->wlandev->netdev, "usb_reset_device() failed, result=%d.\n", |
| result); |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbctlx_complete_sync |
| * |
| * Waits for a synchronous CTLX object to complete, |
| * and then handles the response. |
| * |
| * Arguments: |
| * hw device structure |
| * ctlx CTLX ptr |
| * completor functor object to decide what to |
| * do with the CTLX's result. |
| * |
| * Returns: |
| * 0 Success |
| * -ERESTARTSYS Interrupted by a signal |
| * -EIO CTLX failed |
| * -ENODEV Adapter was unplugged |
| * ??? Result from completor |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, |
| struct hfa384x_usbctlx *ctlx, |
| struct usbctlx_completor *completor) |
| { |
| unsigned long flags; |
| int result; |
| |
| result = wait_for_completion_interruptible(&ctlx->done); |
| |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| /* |
| * We can only handle the CTLX if the USB disconnect |
| * function has not run yet ... |
| */ |
| cleanup: |
| if (hw->wlandev->hwremoved) { |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| result = -ENODEV; |
| } else if (result != 0) { |
| int runqueue = 0; |
| |
| /* |
| * We were probably interrupted, so delete |
| * this CTLX asynchronously, kill the timers |
| * and the URB, and then start the next |
| * pending CTLX. |
| * |
| * NOTE: We can only delete the timers and |
| * the URB if this CTLX is active. |
| */ |
| if (ctlx == get_active_ctlx(hw)) { |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| |
| del_singleshot_timer_sync(&hw->reqtimer); |
| del_singleshot_timer_sync(&hw->resptimer); |
| hw->req_timer_done = 1; |
| hw->resp_timer_done = 1; |
| usb_kill_urb(&hw->ctlx_urb); |
| |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| runqueue = 1; |
| |
| /* |
| * This scenario is so unlikely that I'm |
| * happy with a grubby "goto" solution ... |
| */ |
| if (hw->wlandev->hwremoved) |
| goto cleanup; |
| } |
| |
| /* |
| * The completion task will send this CTLX |
| * to the reaper the next time it runs. We |
| * are no longer in a hurry. |
| */ |
| ctlx->reapable = 1; |
| ctlx->state = CTLX_REQ_FAILED; |
| list_move_tail(&ctlx->list, &hw->ctlxq.completing); |
| |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| |
| if (runqueue) |
| hfa384x_usbctlxq_run(hw); |
| } else { |
| if (ctlx->state == CTLX_COMPLETE) { |
| result = completor->complete(completor); |
| } else { |
| netdev_warn(hw->wlandev->netdev, "CTLX[%d] error: state(%s)\n", |
| le16_to_cpu(ctlx->outbuf.type), |
| ctlxstr(ctlx->state)); |
| result = -EIO; |
| } |
| |
| list_del(&ctlx->list); |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| kfree(ctlx); |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_docmd |
| * |
| * Constructs a command CTLX and submits it. |
| * |
| * NOTE: Any changes to the 'post-submit' code in this function |
| * need to be carried over to hfa384x_cbcmd() since the handling |
| * is virtually identical. |
| * |
| * Arguments: |
| * hw device structure |
| * mode DOWAIT or DOASYNC |
| * cmd cmd structure. Includes all arguments and result |
| * data points. All in host order. in host order |
| * cmdcb command-specific callback |
| * usercb user callback for async calls, NULL for DOWAIT calls |
| * usercb_data user supplied data pointer for async calls, NULL |
| * for DOASYNC calls |
| * |
| * Returns: |
| * 0 success |
| * -EIO CTLX failure |
| * -ERESTARTSYS Awakened on signal |
| * >0 command indicated error, Status and Resp0-2 are |
| * in hw structure. |
| * |
| * Side effects: |
| * |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| static int |
| hfa384x_docmd(struct hfa384x *hw, |
| enum cmd_mode mode, |
| struct hfa384x_metacmd *cmd, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data) |
| { |
| int result; |
| struct hfa384x_usbctlx *ctlx; |
| |
| ctlx = usbctlx_alloc(); |
| if (!ctlx) { |
| result = -ENOMEM; |
| goto done; |
| } |
| |
| /* Initialize the command */ |
| ctlx->outbuf.cmdreq.type = cpu_to_le16(HFA384x_USB_CMDREQ); |
| ctlx->outbuf.cmdreq.cmd = cpu_to_le16(cmd->cmd); |
| ctlx->outbuf.cmdreq.parm0 = cpu_to_le16(cmd->parm0); |
| ctlx->outbuf.cmdreq.parm1 = cpu_to_le16(cmd->parm1); |
| ctlx->outbuf.cmdreq.parm2 = cpu_to_le16(cmd->parm2); |
| |
| ctlx->outbufsize = sizeof(ctlx->outbuf.cmdreq); |
| |
| pr_debug("cmdreq: cmd=0x%04x parm0=0x%04x parm1=0x%04x parm2=0x%04x\n", |
| cmd->cmd, cmd->parm0, cmd->parm1, cmd->parm2); |
| |
| ctlx->reapable = mode; |
| ctlx->cmdcb = cmdcb; |
| ctlx->usercb = usercb; |
| ctlx->usercb_data = usercb_data; |
| |
| result = hfa384x_usbctlx_submit(hw, ctlx); |
| if (result != 0) { |
| kfree(ctlx); |
| } else if (mode == DOWAIT) { |
| struct usbctlx_cmd_completor cmd_completor; |
| struct usbctlx_completor *completor; |
| |
| completor = init_cmd_completor(&cmd_completor, |
| &ctlx->inbuf.cmdresp, |
| &cmd->result); |
| |
| result = hfa384x_usbctlx_complete_sync(hw, ctlx, completor); |
| } |
| |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_dorrid |
| * |
| * Constructs a read rid CTLX and issues it. |
| * |
| * NOTE: Any changes to the 'post-submit' code in this function |
| * need to be carried over to hfa384x_cbrrid() since the handling |
| * is virtually identical. |
| * |
| * Arguments: |
| * hw device structure |
| * mode DOWAIT or DOASYNC |
| * rid Read RID number (host order) |
| * riddata Caller supplied buffer that MAC formatted RID.data |
| * record will be written to for DOWAIT calls. Should |
| * be NULL for DOASYNC calls. |
| * riddatalen Buffer length for DOWAIT calls. Zero for DOASYNC calls. |
| * cmdcb command callback for async calls, NULL for DOWAIT calls |
| * usercb user callback for async calls, NULL for DOWAIT calls |
| * usercb_data user supplied data pointer for async calls, NULL |
| * for DOWAIT calls |
| * |
| * Returns: |
| * 0 success |
| * -EIO CTLX failure |
| * -ERESTARTSYS Awakened on signal |
| * -ENODATA riddatalen != macdatalen |
| * >0 command indicated error, Status and Resp0-2 are |
| * in hw structure. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt (DOASYNC) |
| * process (DOWAIT or DOASYNC) |
| *---------------------------------------------------------------- |
| */ |
| static int |
| hfa384x_dorrid(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 rid, |
| void *riddata, |
| unsigned int riddatalen, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data) |
| { |
| int result; |
| struct hfa384x_usbctlx *ctlx; |
| |
| ctlx = usbctlx_alloc(); |
| if (!ctlx) { |
| result = -ENOMEM; |
| goto done; |
| } |
| |
| /* Initialize the command */ |
| ctlx->outbuf.rridreq.type = cpu_to_le16(HFA384x_USB_RRIDREQ); |
| ctlx->outbuf.rridreq.frmlen = |
| cpu_to_le16(sizeof(ctlx->outbuf.rridreq.rid)); |
| ctlx->outbuf.rridreq.rid = cpu_to_le16(rid); |
| |
| ctlx->outbufsize = sizeof(ctlx->outbuf.rridreq); |
| |
| ctlx->reapable = mode; |
| ctlx->cmdcb = cmdcb; |
| ctlx->usercb = usercb; |
| ctlx->usercb_data = usercb_data; |
| |
| /* Submit the CTLX */ |
| result = hfa384x_usbctlx_submit(hw, ctlx); |
| if (result != 0) { |
| kfree(ctlx); |
| } else if (mode == DOWAIT) { |
| struct usbctlx_rrid_completor completor; |
| |
| result = |
| hfa384x_usbctlx_complete_sync(hw, ctlx, |
| init_rrid_completor |
| (&completor, |
| &ctlx->inbuf.rridresp, |
| riddata, riddatalen)); |
| } |
| |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_dowrid |
| * |
| * Constructs a write rid CTLX and issues it. |
| * |
| * NOTE: Any changes to the 'post-submit' code in this function |
| * need to be carried over to hfa384x_cbwrid() since the handling |
| * is virtually identical. |
| * |
| * Arguments: |
| * hw device structure |
| * enum cmd_mode DOWAIT or DOASYNC |
| * rid RID code |
| * riddata Data portion of RID formatted for MAC |
| * riddatalen Length of the data portion in bytes |
| * cmdcb command callback for async calls, NULL for DOWAIT calls |
| * usercb user callback for async calls, NULL for DOWAIT calls |
| * usercb_data user supplied data pointer for async calls |
| * |
| * Returns: |
| * 0 success |
| * -ETIMEDOUT timed out waiting for register ready or |
| * command completion |
| * >0 command indicated error, Status and Resp0-2 are |
| * in hw structure. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt (DOASYNC) |
| * process (DOWAIT or DOASYNC) |
| *---------------------------------------------------------------- |
| */ |
| static int |
| hfa384x_dowrid(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 rid, |
| void *riddata, |
| unsigned int riddatalen, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data) |
| { |
| int result; |
| struct hfa384x_usbctlx *ctlx; |
| |
| ctlx = usbctlx_alloc(); |
| if (!ctlx) { |
| result = -ENOMEM; |
| goto done; |
| } |
| |
| /* Initialize the command */ |
| ctlx->outbuf.wridreq.type = cpu_to_le16(HFA384x_USB_WRIDREQ); |
| ctlx->outbuf.wridreq.frmlen = cpu_to_le16((sizeof |
| (ctlx->outbuf.wridreq.rid) + |
| riddatalen + 1) / 2); |
| ctlx->outbuf.wridreq.rid = cpu_to_le16(rid); |
| memcpy(ctlx->outbuf.wridreq.data, riddata, riddatalen); |
| |
| ctlx->outbufsize = sizeof(ctlx->outbuf.wridreq.type) + |
| sizeof(ctlx->outbuf.wridreq.frmlen) + |
| sizeof(ctlx->outbuf.wridreq.rid) + riddatalen; |
| |
| ctlx->reapable = mode; |
| ctlx->cmdcb = cmdcb; |
| ctlx->usercb = usercb; |
| ctlx->usercb_data = usercb_data; |
| |
| /* Submit the CTLX */ |
| result = hfa384x_usbctlx_submit(hw, ctlx); |
| if (result != 0) { |
| kfree(ctlx); |
| } else if (mode == DOWAIT) { |
| struct usbctlx_cmd_completor completor; |
| struct hfa384x_cmdresult wridresult; |
| |
| result = hfa384x_usbctlx_complete_sync(hw, |
| ctlx, |
| init_wrid_completor |
| (&completor, |
| &ctlx->inbuf.wridresp, |
| &wridresult)); |
| } |
| |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_dormem |
| * |
| * Constructs a readmem CTLX and issues it. |
| * |
| * NOTE: Any changes to the 'post-submit' code in this function |
| * need to be carried over to hfa384x_cbrmem() since the handling |
| * is virtually identical. |
| * |
| * Arguments: |
| * hw device structure |
| * mode DOWAIT or DOASYNC |
| * page MAC address space page (CMD format) |
| * offset MAC address space offset |
| * data Ptr to data buffer to receive read |
| * len Length of the data to read (max == 2048) |
| * cmdcb command callback for async calls, NULL for DOWAIT calls |
| * usercb user callback for async calls, NULL for DOWAIT calls |
| * usercb_data user supplied data pointer for async calls |
| * |
| * Returns: |
| * 0 success |
| * -ETIMEDOUT timed out waiting for register ready or |
| * command completion |
| * >0 command indicated error, Status and Resp0-2 are |
| * in hw structure. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt (DOASYNC) |
| * process (DOWAIT or DOASYNC) |
| *---------------------------------------------------------------- |
| */ |
| static int |
| hfa384x_dormem(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 page, |
| u16 offset, |
| void *data, |
| unsigned int len, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data) |
| { |
| int result; |
| struct hfa384x_usbctlx *ctlx; |
| |
| ctlx = usbctlx_alloc(); |
| if (!ctlx) { |
| result = -ENOMEM; |
| goto done; |
| } |
| |
| /* Initialize the command */ |
| ctlx->outbuf.rmemreq.type = cpu_to_le16(HFA384x_USB_RMEMREQ); |
| ctlx->outbuf.rmemreq.frmlen = |
| cpu_to_le16(sizeof(ctlx->outbuf.rmemreq.offset) + |
| sizeof(ctlx->outbuf.rmemreq.page) + len); |
| ctlx->outbuf.rmemreq.offset = cpu_to_le16(offset); |
| ctlx->outbuf.rmemreq.page = cpu_to_le16(page); |
| |
| ctlx->outbufsize = sizeof(ctlx->outbuf.rmemreq); |
| |
| pr_debug("type=0x%04x frmlen=%d offset=0x%04x page=0x%04x\n", |
| ctlx->outbuf.rmemreq.type, |
| ctlx->outbuf.rmemreq.frmlen, |
| ctlx->outbuf.rmemreq.offset, ctlx->outbuf.rmemreq.page); |
| |
| pr_debug("pktsize=%zd\n", ROUNDUP64(sizeof(ctlx->outbuf.rmemreq))); |
| |
| ctlx->reapable = mode; |
| ctlx->cmdcb = cmdcb; |
| ctlx->usercb = usercb; |
| ctlx->usercb_data = usercb_data; |
| |
| result = hfa384x_usbctlx_submit(hw, ctlx); |
| if (result != 0) { |
| kfree(ctlx); |
| } else if (mode == DOWAIT) { |
| struct usbctlx_rmem_completor completor; |
| |
| result = |
| hfa384x_usbctlx_complete_sync(hw, ctlx, |
| init_rmem_completor |
| (&completor, |
| &ctlx->inbuf.rmemresp, data, |
| len)); |
| } |
| |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_dowmem |
| * |
| * Constructs a writemem CTLX and issues it. |
| * |
| * NOTE: Any changes to the 'post-submit' code in this function |
| * need to be carried over to hfa384x_cbwmem() since the handling |
| * is virtually identical. |
| * |
| * Arguments: |
| * hw device structure |
| * mode DOWAIT or DOASYNC |
| * page MAC address space page (CMD format) |
| * offset MAC address space offset |
| * data Ptr to data buffer containing write data |
| * len Length of the data to read (max == 2048) |
| * cmdcb command callback for async calls, NULL for DOWAIT calls |
| * usercb user callback for async calls, NULL for DOWAIT calls |
| * usercb_data user supplied data pointer for async calls. |
| * |
| * Returns: |
| * 0 success |
| * -ETIMEDOUT timed out waiting for register ready or |
| * command completion |
| * >0 command indicated error, Status and Resp0-2 are |
| * in hw structure. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt (DOWAIT) |
| * process (DOWAIT or DOASYNC) |
| *---------------------------------------------------------------- |
| */ |
| static int |
| hfa384x_dowmem(struct hfa384x *hw, |
| enum cmd_mode mode, |
| u16 page, |
| u16 offset, |
| void *data, |
| unsigned int len, |
| ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data) |
| { |
| int result; |
| struct hfa384x_usbctlx *ctlx; |
| |
| pr_debug("page=0x%04x offset=0x%04x len=%d\n", page, offset, len); |
| |
| ctlx = usbctlx_alloc(); |
| if (!ctlx) { |
| result = -ENOMEM; |
| goto done; |
| } |
| |
| /* Initialize the command */ |
| ctlx->outbuf.wmemreq.type = cpu_to_le16(HFA384x_USB_WMEMREQ); |
| ctlx->outbuf.wmemreq.frmlen = |
| cpu_to_le16(sizeof(ctlx->outbuf.wmemreq.offset) + |
| sizeof(ctlx->outbuf.wmemreq.page) + len); |
| ctlx->outbuf.wmemreq.offset = cpu_to_le16(offset); |
| ctlx->outbuf.wmemreq.page = cpu_to_le16(page); |
| memcpy(ctlx->outbuf.wmemreq.data, data, len); |
| |
| ctlx->outbufsize = sizeof(ctlx->outbuf.wmemreq.type) + |
| sizeof(ctlx->outbuf.wmemreq.frmlen) + |
| sizeof(ctlx->outbuf.wmemreq.offset) + |
| sizeof(ctlx->outbuf.wmemreq.page) + len; |
| |
| ctlx->reapable = mode; |
| ctlx->cmdcb = cmdcb; |
| ctlx->usercb = usercb; |
| ctlx->usercb_data = usercb_data; |
| |
| result = hfa384x_usbctlx_submit(hw, ctlx); |
| if (result != 0) { |
| kfree(ctlx); |
| } else if (mode == DOWAIT) { |
| struct usbctlx_cmd_completor completor; |
| struct hfa384x_cmdresult wmemresult; |
| |
| result = hfa384x_usbctlx_complete_sync(hw, |
| ctlx, |
| init_wmem_completor |
| (&completor, |
| &ctlx->inbuf.wmemresp, |
| &wmemresult)); |
| } |
| |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_disable |
| * |
| * Issues the disable command to stop communications on one of |
| * the MACs 'ports'. Only macport 0 is valid for stations. |
| * APs may also disable macports 1-6. Only ports that have been |
| * previously enabled may be disabled. |
| * |
| * Arguments: |
| * hw device structure |
| * macport MAC port number (host order) |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported failure - f/w status code |
| * <0 driver reported error (timeout|bad arg) |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_disable(struct hfa384x *hw, u16 macport) |
| { |
| int result = 0; |
| |
| if ((!hw->isap && macport != 0) || |
| (hw->isap && !(macport <= HFA384x_PORTID_MAX)) || |
| !(hw->port_enabled[macport])) { |
| result = -EINVAL; |
| } else { |
| result = hfa384x_cmd_disable(hw, macport); |
| if (result == 0) |
| hw->port_enabled[macport] = 0; |
| } |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_enable |
| * |
| * Issues the enable command to enable communications on one of |
| * the MACs 'ports'. Only macport 0 is valid for stations. |
| * APs may also enable macports 1-6. Only ports that are currently |
| * disabled may be enabled. |
| * |
| * Arguments: |
| * hw device structure |
| * macport MAC port number |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported failure - f/w status code |
| * <0 driver reported error (timeout|bad arg) |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_enable(struct hfa384x *hw, u16 macport) |
| { |
| int result = 0; |
| |
| if ((!hw->isap && macport != 0) || |
| (hw->isap && !(macport <= HFA384x_PORTID_MAX)) || |
| (hw->port_enabled[macport])) { |
| result = -EINVAL; |
| } else { |
| result = hfa384x_cmd_enable(hw, macport); |
| if (result == 0) |
| hw->port_enabled[macport] = 1; |
| } |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_flashdl_enable |
| * |
| * Begins the flash download state. Checks to see that we're not |
| * already in a download state and that a port isn't enabled. |
| * Sets the download state and retrieves the flash download |
| * buffer location, buffer size, and timeout length. |
| * |
| * Arguments: |
| * hw device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_flashdl_enable(struct hfa384x *hw) |
| { |
| int result = 0; |
| int i; |
| |
| /* Check that a port isn't active */ |
| for (i = 0; i < HFA384x_PORTID_MAX; i++) { |
| if (hw->port_enabled[i]) { |
| pr_debug("called when port enabled.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* Check that we're not already in a download state */ |
| if (hw->dlstate != HFA384x_DLSTATE_DISABLED) |
| return -EINVAL; |
| |
| /* Retrieve the buffer loc&size and timeout */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DOWNLOADBUFFER, |
| &hw->bufinfo, sizeof(hw->bufinfo)); |
| if (result) |
| return result; |
| |
| le16_to_cpus(&hw->bufinfo.page); |
| le16_to_cpus(&hw->bufinfo.offset); |
| le16_to_cpus(&hw->bufinfo.len); |
| result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_MAXLOADTIME, |
| &hw->dltimeout); |
| if (result) |
| return result; |
| |
| le16_to_cpus(&hw->dltimeout); |
| |
| pr_debug("flashdl_enable\n"); |
| |
| hw->dlstate = HFA384x_DLSTATE_FLASHENABLED; |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_flashdl_disable |
| * |
| * Ends the flash download state. Note that this will cause the MAC |
| * firmware to restart. |
| * |
| * Arguments: |
| * hw device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_flashdl_disable(struct hfa384x *hw) |
| { |
| /* Check that we're already in the download state */ |
| if (hw->dlstate != HFA384x_DLSTATE_FLASHENABLED) |
| return -EINVAL; |
| |
| pr_debug("flashdl_enable\n"); |
| |
| /* There isn't much we can do at this point, so I don't */ |
| /* bother w/ the return value */ |
| hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0, 0); |
| hw->dlstate = HFA384x_DLSTATE_DISABLED; |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_flashdl_write |
| * |
| * Performs a FLASH download of a chunk of data. First checks to see |
| * that we're in the FLASH download state, then sets the download |
| * mode, uses the aux functions to 1) copy the data to the flash |
| * buffer, 2) sets the download 'write flash' mode, 3) readback and |
| * compare. Lather rinse, repeat as many times an necessary to get |
| * all the given data into flash. |
| * When all data has been written using this function (possibly |
| * repeatedly), call drvr_flashdl_disable() to end the download state |
| * and restart the MAC. |
| * |
| * Arguments: |
| * hw device structure |
| * daddr Card address to write to. (host order) |
| * buf Ptr to data to write. |
| * len Length of data (host order). |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_flashdl_write(struct hfa384x *hw, u32 daddr, |
| void *buf, u32 len) |
| { |
| int result = 0; |
| u32 dlbufaddr; |
| int nburns; |
| u32 burnlen; |
| u32 burndaddr; |
| u16 burnlo; |
| u16 burnhi; |
| int nwrites; |
| u8 *writebuf; |
| u16 writepage; |
| u16 writeoffset; |
| u32 writelen; |
| int i; |
| int j; |
| |
| pr_debug("daddr=0x%08x len=%d\n", daddr, len); |
| |
| /* Check that we're in the flash download state */ |
| if (hw->dlstate != HFA384x_DLSTATE_FLASHENABLED) |
| return -EINVAL; |
| |
| netdev_info(hw->wlandev->netdev, |
| "Download %d bytes to flash @0x%06x\n", len, daddr); |
| |
| /* Convert to flat address for arithmetic */ |
| /* NOTE: dlbuffer RID stores the address in AUX format */ |
| dlbufaddr = |
| HFA384x_ADDR_AUX_MKFLAT(hw->bufinfo.page, hw->bufinfo.offset); |
| pr_debug("dlbuf.page=0x%04x dlbuf.offset=0x%04x dlbufaddr=0x%08x\n", |
| hw->bufinfo.page, hw->bufinfo.offset, dlbufaddr); |
| /* Calculations to determine how many fills of the dlbuffer to do |
| * and how many USB wmemreq's to do for each fill. At this point |
| * in time, the dlbuffer size and the wmemreq size are the same. |
| * Therefore, nwrites should always be 1. The extra complexity |
| * here is a hedge against future changes. |
| */ |
| |
| /* Figure out how many times to do the flash programming */ |
| nburns = len / hw->bufinfo.len; |
| nburns += (len % hw->bufinfo.len) ? 1 : 0; |
| |
| /* For each flash program cycle, how many USB wmemreq's are needed? */ |
| nwrites = hw->bufinfo.len / HFA384x_USB_RWMEM_MAXLEN; |
| nwrites += (hw->bufinfo.len % HFA384x_USB_RWMEM_MAXLEN) ? 1 : 0; |
| |
| /* For each burn */ |
| for (i = 0; i < nburns; i++) { |
| /* Get the dest address and len */ |
| burnlen = (len - (hw->bufinfo.len * i)) > hw->bufinfo.len ? |
| hw->bufinfo.len : (len - (hw->bufinfo.len * i)); |
| burndaddr = daddr + (hw->bufinfo.len * i); |
| burnlo = HFA384x_ADDR_CMD_MKOFF(burndaddr); |
| burnhi = HFA384x_ADDR_CMD_MKPAGE(burndaddr); |
| |
| netdev_info(hw->wlandev->netdev, "Writing %d bytes to flash @0x%06x\n", |
| burnlen, burndaddr); |
| |
| /* Set the download mode */ |
| result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NV, |
| burnlo, burnhi, burnlen); |
| if (result) { |
| netdev_err(hw->wlandev->netdev, |
| "download(NV,lo=%x,hi=%x,len=%x) cmd failed, result=%d. Aborting d/l\n", |
| burnlo, burnhi, burnlen, result); |
| goto exit_proc; |
| } |
| |
| /* copy the data to the flash download buffer */ |
| for (j = 0; j < nwrites; j++) { |
| writebuf = buf + |
| (i * hw->bufinfo.len) + |
| (j * HFA384x_USB_RWMEM_MAXLEN); |
| |
| writepage = HFA384x_ADDR_CMD_MKPAGE(dlbufaddr + |
| (j * HFA384x_USB_RWMEM_MAXLEN)); |
| writeoffset = HFA384x_ADDR_CMD_MKOFF(dlbufaddr + |
| (j * HFA384x_USB_RWMEM_MAXLEN)); |
| |
| writelen = burnlen - (j * HFA384x_USB_RWMEM_MAXLEN); |
| writelen = writelen > HFA384x_USB_RWMEM_MAXLEN ? |
| HFA384x_USB_RWMEM_MAXLEN : writelen; |
| |
| result = hfa384x_dowmem_wait(hw, |
| writepage, |
| writeoffset, |
| writebuf, writelen); |
| } |
| |
| /* set the download 'write flash' mode */ |
| result = hfa384x_cmd_download(hw, |
| HFA384x_PROGMODE_NVWRITE, |
| 0, 0, 0); |
| if (result) { |
| netdev_err(hw->wlandev->netdev, |
| "download(NVWRITE,lo=%x,hi=%x,len=%x) cmd failed, result=%d. Aborting d/l\n", |
| burnlo, burnhi, burnlen, result); |
| goto exit_proc; |
| } |
| |
| /* TODO: We really should do a readback and compare. */ |
| } |
| |
| exit_proc: |
| |
| /* Leave the firmware in the 'post-prog' mode. flashdl_disable will */ |
| /* actually disable programming mode. Remember, that will cause the */ |
| /* the firmware to effectively reset itself. */ |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_getconfig |
| * |
| * Performs the sequence necessary to read a config/info item. |
| * |
| * Arguments: |
| * hw device structure |
| * rid config/info record id (host order) |
| * buf host side record buffer. Upon return it will |
| * contain the body portion of the record (minus the |
| * RID and len). |
| * len buffer length (in bytes, should match record length) |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * -ENODATA length mismatch between argument and retrieved |
| * record. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_getconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len) |
| { |
| return hfa384x_dorrid_wait(hw, rid, buf, len); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_setconfig_async |
| * |
| * Performs the sequence necessary to write a config/info item. |
| * |
| * Arguments: |
| * hw device structure |
| * rid config/info record id (in host order) |
| * buf host side record buffer |
| * len buffer length (in bytes) |
| * usercb completion callback |
| * usercb_data completion callback argument |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int |
| hfa384x_drvr_setconfig_async(struct hfa384x *hw, |
| u16 rid, |
| void *buf, |
| u16 len, ctlx_usercb_t usercb, void *usercb_data) |
| { |
| return hfa384x_dowrid_async(hw, rid, buf, len, |
| hfa384x_cb_status, usercb, usercb_data); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_ramdl_disable |
| * |
| * Ends the ram download state. |
| * |
| * Arguments: |
| * hw device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_ramdl_disable(struct hfa384x *hw) |
| { |
| /* Check that we're already in the download state */ |
| if (hw->dlstate != HFA384x_DLSTATE_RAMENABLED) |
| return -EINVAL; |
| |
| pr_debug("ramdl_disable()\n"); |
| |
| /* There isn't much we can do at this point, so I don't */ |
| /* bother w/ the return value */ |
| hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0, 0); |
| hw->dlstate = HFA384x_DLSTATE_DISABLED; |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_ramdl_enable |
| * |
| * Begins the ram download state. Checks to see that we're not |
| * already in a download state and that a port isn't enabled. |
| * Sets the download state and calls cmd_download with the |
| * ENABLE_VOLATILE subcommand and the exeaddr argument. |
| * |
| * Arguments: |
| * hw device structure |
| * exeaddr the card execution address that will be |
| * jumped to when ramdl_disable() is called |
| * (host order). |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_ramdl_enable(struct hfa384x *hw, u32 exeaddr) |
| { |
| int result = 0; |
| u16 lowaddr; |
| u16 hiaddr; |
| int i; |
| |
| /* Check that a port isn't active */ |
| for (i = 0; i < HFA384x_PORTID_MAX; i++) { |
| if (hw->port_enabled[i]) { |
| netdev_err(hw->wlandev->netdev, |
| "Can't download with a macport enabled.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* Check that we're not already in a download state */ |
| if (hw->dlstate != HFA384x_DLSTATE_DISABLED) { |
| netdev_err(hw->wlandev->netdev, |
| "Download state not disabled.\n"); |
| return -EINVAL; |
| } |
| |
| pr_debug("ramdl_enable, exeaddr=0x%08x\n", exeaddr); |
| |
| /* Call the download(1,addr) function */ |
| lowaddr = HFA384x_ADDR_CMD_MKOFF(exeaddr); |
| hiaddr = HFA384x_ADDR_CMD_MKPAGE(exeaddr); |
| |
| result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_RAM, |
| lowaddr, hiaddr, 0); |
| |
| if (result == 0) { |
| /* Set the download state */ |
| hw->dlstate = HFA384x_DLSTATE_RAMENABLED; |
| } else { |
| pr_debug("cmd_download(0x%04x, 0x%04x) failed, result=%d.\n", |
| lowaddr, hiaddr, result); |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_ramdl_write |
| * |
| * Performs a RAM download of a chunk of data. First checks to see |
| * that we're in the RAM download state, then uses the [read|write]mem USB |
| * commands to 1) copy the data, 2) readback and compare. The download |
| * state is unaffected. When all data has been written using |
| * this function, call drvr_ramdl_disable() to end the download state |
| * and restart the MAC. |
| * |
| * Arguments: |
| * hw device structure |
| * daddr Card address to write to. (host order) |
| * buf Ptr to data to write. |
| * len Length of data (host order). |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_ramdl_write(struct hfa384x *hw, u32 daddr, void *buf, u32 len) |
| { |
| int result = 0; |
| int nwrites; |
| u8 *data = buf; |
| int i; |
| u32 curraddr; |
| u16 currpage; |
| u16 curroffset; |
| u16 currlen; |
| |
| /* Check that we're in the ram download state */ |
| if (hw->dlstate != HFA384x_DLSTATE_RAMENABLED) |
| return -EINVAL; |
| |
| netdev_info(hw->wlandev->netdev, "Writing %d bytes to ram @0x%06x\n", |
| len, daddr); |
| |
| /* How many dowmem calls? */ |
| nwrites = len / HFA384x_USB_RWMEM_MAXLEN; |
| nwrites += len % HFA384x_USB_RWMEM_MAXLEN ? 1 : 0; |
| |
| /* Do blocking wmem's */ |
| for (i = 0; i < nwrites; i++) { |
| /* make address args */ |
| curraddr = daddr + (i * HFA384x_USB_RWMEM_MAXLEN); |
| currpage = HFA384x_ADDR_CMD_MKPAGE(curraddr); |
| curroffset = HFA384x_ADDR_CMD_MKOFF(curraddr); |
| currlen = len - (i * HFA384x_USB_RWMEM_MAXLEN); |
| if (currlen > HFA384x_USB_RWMEM_MAXLEN) |
| currlen = HFA384x_USB_RWMEM_MAXLEN; |
| |
| /* Do blocking ctlx */ |
| result = hfa384x_dowmem_wait(hw, |
| currpage, |
| curroffset, |
| data + |
| (i * HFA384x_USB_RWMEM_MAXLEN), |
| currlen); |
| |
| if (result) |
| break; |
| |
| /* TODO: We really should have a readback. */ |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_readpda |
| * |
| * Performs the sequence to read the PDA space. Note there is no |
| * drvr_writepda() function. Writing a PDA is |
| * generally implemented by a calling component via calls to |
| * cmd_download and writing to the flash download buffer via the |
| * aux regs. |
| * |
| * Arguments: |
| * hw device structure |
| * buf buffer to store PDA in |
| * len buffer length |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * -ETIMEDOUT timeout waiting for the cmd regs to become |
| * available, or waiting for the control reg |
| * to indicate the Aux port is enabled. |
| * -ENODATA the buffer does NOT contain a valid PDA. |
| * Either the card PDA is bad, or the auxdata |
| * reads are giving us garbage. |
| * |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process or non-card interrupt. |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_readpda(struct hfa384x *hw, void *buf, unsigned int len) |
| { |
| int result = 0; |
| __le16 *pda = buf; |
| int pdaok = 0; |
| int morepdrs = 1; |
| int currpdr = 0; /* word offset of the current pdr */ |
| size_t i; |
| u16 pdrlen; /* pdr length in bytes, host order */ |
| u16 pdrcode; /* pdr code, host order */ |
| u16 currpage; |
| u16 curroffset; |
| struct pdaloc { |
| u32 cardaddr; |
| u16 auxctl; |
| } pdaloc[] = { |
| { |
| HFA3842_PDA_BASE, 0}, { |
| HFA3841_PDA_BASE, 0}, { |
| HFA3841_PDA_BOGUS_BASE, 0} |
| }; |
| |
| /* Read the pda from each known address. */ |
| for (i = 0; i < ARRAY_SIZE(pdaloc); i++) { |
| /* Make address */ |
| currpage = HFA384x_ADDR_CMD_MKPAGE(pdaloc[i].cardaddr); |
| curroffset = HFA384x_ADDR_CMD_MKOFF(pdaloc[i].cardaddr); |
| |
| /* units of bytes */ |
| result = hfa384x_dormem_wait(hw, currpage, curroffset, buf, |
| len); |
| |
| if (result) { |
| netdev_warn(hw->wlandev->netdev, |
| "Read from index %zd failed, continuing\n", |
| i); |
| continue; |
| } |
| |
| /* Test for garbage */ |
| pdaok = 1; /* initially assume good */ |
| morepdrs = 1; |
| while (pdaok && morepdrs) { |
| pdrlen = le16_to_cpu(pda[currpdr]) * 2; |
| pdrcode = le16_to_cpu(pda[currpdr + 1]); |
| /* Test the record length */ |
| if (pdrlen > HFA384x_PDR_LEN_MAX || pdrlen == 0) { |
| netdev_err(hw->wlandev->netdev, |
| "pdrlen invalid=%d\n", pdrlen); |
| pdaok = 0; |
| break; |
| } |
| /* Test the code */ |
| if (!hfa384x_isgood_pdrcode(pdrcode)) { |
| netdev_err(hw->wlandev->netdev, "pdrcode invalid=%d\n", |
| pdrcode); |
| pdaok = 0; |
| break; |
| } |
| /* Test for completion */ |
| if (pdrcode == HFA384x_PDR_END_OF_PDA) |
| morepdrs = 0; |
| |
| /* Move to the next pdr (if necessary) */ |
| if (morepdrs) { |
| /* note the access to pda[], need words here */ |
| currpdr += le16_to_cpu(pda[currpdr]) + 1; |
| } |
| } |
| if (pdaok) { |
| netdev_info(hw->wlandev->netdev, |
| "PDA Read from 0x%08x in %s space.\n", |
| pdaloc[i].cardaddr, |
| pdaloc[i].auxctl == 0 ? "EXTDS" : |
| pdaloc[i].auxctl == 1 ? "NV" : |
| pdaloc[i].auxctl == 2 ? "PHY" : |
| pdaloc[i].auxctl == 3 ? "ICSRAM" : |
| "<bogus auxctl>"); |
| break; |
| } |
| } |
| result = pdaok ? 0 : -ENODATA; |
| |
| if (result) |
| pr_debug("Failure: pda is not okay\n"); |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_setconfig |
| * |
| * Performs the sequence necessary to write a config/info item. |
| * |
| * Arguments: |
| * hw device structure |
| * rid config/info record id (in host order) |
| * buf host side record buffer |
| * len buffer length (in bytes) |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_setconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len) |
| { |
| return hfa384x_dowrid_wait(hw, rid, buf, len); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_start |
| * |
| * Issues the MAC initialize command, sets up some data structures, |
| * and enables the interrupts. After this function completes, the |
| * low-level stuff should be ready for any/all commands. |
| * |
| * Arguments: |
| * hw device structure |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_start(struct hfa384x *hw) |
| { |
| int result, result1, result2; |
| u16 status; |
| |
| might_sleep(); |
| |
| /* Clear endpoint stalls - but only do this if the endpoint |
| * is showing a stall status. Some prism2 cards seem to behave |
| * badly if a clear_halt is called when the endpoint is already |
| * ok |
| */ |
| result = |
| usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_in, &status); |
| if (result < 0) { |
| netdev_err(hw->wlandev->netdev, "Cannot get bulk in endpoint status.\n"); |
| goto done; |
| } |
| if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_in)) |
| netdev_err(hw->wlandev->netdev, "Failed to reset bulk in endpoint.\n"); |
| |
| result = |
| usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_out, &status); |
| if (result < 0) { |
| netdev_err(hw->wlandev->netdev, "Cannot get bulk out endpoint status.\n"); |
| goto done; |
| } |
| if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_out)) |
| netdev_err(hw->wlandev->netdev, "Failed to reset bulk out endpoint.\n"); |
| |
| /* Synchronous unlink, in case we're trying to restart the driver */ |
| usb_kill_urb(&hw->rx_urb); |
| |
| /* Post the IN urb */ |
| result = submit_rx_urb(hw, GFP_KERNEL); |
| if (result != 0) { |
| netdev_err(hw->wlandev->netdev, |
| "Fatal, failed to submit RX URB, result=%d\n", |
| result); |
| goto done; |
| } |
| |
| /* Call initialize twice, with a 1 second sleep in between. |
| * This is a nasty work-around since many prism2 cards seem to |
| * need time to settle after an init from cold. The second |
| * call to initialize in theory is not necessary - but we call |
| * it anyway as a double insurance policy: |
| * 1) If the first init should fail, the second may well succeed |
| * and the card can still be used |
| * 2) It helps ensures all is well with the card after the first |
| * init and settle time. |
| */ |
| result1 = hfa384x_cmd_initialize(hw); |
| msleep(1000); |
| result = hfa384x_cmd_initialize(hw); |
| result2 = result; |
| if (result1 != 0) { |
| if (result2 != 0) { |
| netdev_err(hw->wlandev->netdev, |
| "cmd_initialize() failed on two attempts, results %d and %d\n", |
| result1, result2); |
| usb_kill_urb(&hw->rx_urb); |
| goto done; |
| } else { |
| pr_debug("First cmd_initialize() failed (result %d),\n", |
| result1); |
| pr_debug("but second attempt succeeded. All should be ok\n"); |
| } |
| } else if (result2 != 0) { |
| netdev_warn(hw->wlandev->netdev, "First cmd_initialize() succeeded, but second attempt failed (result=%d)\n", |
| result2); |
| netdev_warn(hw->wlandev->netdev, |
| "Most likely the card will be functional\n"); |
| goto done; |
| } |
| |
| hw->state = HFA384x_STATE_RUNNING; |
| |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_stop |
| * |
| * Shuts down the MAC to the point where it is safe to unload the |
| * driver. Any subsystem that may be holding a data or function |
| * ptr into the driver must be cleared/deinitialized. |
| * |
| * Arguments: |
| * hw device structure |
| * Returns: |
| * 0 success |
| * >0 f/w reported error - f/w status code |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_stop(struct hfa384x *hw) |
| { |
| int i; |
| |
| might_sleep(); |
| |
| /* There's no need for spinlocks here. The USB "disconnect" |
| * function sets this "removed" flag and then calls us. |
| */ |
| if (!hw->wlandev->hwremoved) { |
| /* Call initialize to leave the MAC in its 'reset' state */ |
| hfa384x_cmd_initialize(hw); |
| |
| /* Cancel the rxurb */ |
| usb_kill_urb(&hw->rx_urb); |
| } |
| |
| hw->link_status = HFA384x_LINK_NOTCONNECTED; |
| hw->state = HFA384x_STATE_INIT; |
| |
| del_timer_sync(&hw->commsqual_timer); |
| |
| /* Clear all the port status */ |
| for (i = 0; i < HFA384x_NUMPORTS_MAX; i++) |
| hw->port_enabled[i] = 0; |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_drvr_txframe |
| * |
| * Takes a frame from prism2sta and queues it for transmission. |
| * |
| * Arguments: |
| * hw device structure |
| * skb packet buffer struct. Contains an 802.11 |
| * data frame. |
| * p80211_hdr points to the 802.11 header for the packet. |
| * Returns: |
| * 0 Success and more buffs available |
| * 1 Success but no more buffs |
| * 2 Allocation failure |
| * 4 Buffer full or queue busy |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| *---------------------------------------------------------------- |
| */ |
| int hfa384x_drvr_txframe(struct hfa384x *hw, struct sk_buff *skb, |
| union p80211_hdr *p80211_hdr, |
| struct p80211_metawep *p80211_wep) |
| { |
| int usbpktlen = sizeof(struct hfa384x_tx_frame); |
| int result; |
| int ret; |
| char *ptr; |
| |
| if (hw->tx_urb.status == -EINPROGRESS) { |
| netdev_warn(hw->wlandev->netdev, "TX URB already in use\n"); |
| result = 3; |
| goto exit; |
| } |
| |
| /* Build Tx frame structure */ |
| /* Set up the control field */ |
| memset(&hw->txbuff.txfrm.desc, 0, sizeof(hw->txbuff.txfrm.desc)); |
| |
| /* Setup the usb type field */ |
| hw->txbuff.type = cpu_to_le16(HFA384x_USB_TXFRM); |
| |
| /* Set up the sw_support field to identify this frame */ |
| hw->txbuff.txfrm.desc.sw_support = 0x0123; |
| |
| /* Tx complete and Tx exception disable per dleach. Might be causing |
| * buf depletion |
| */ |
| /* #define DOEXC SLP -- doboth breaks horribly under load, doexc less so. */ |
| #if defined(DOBOTH) |
| hw->txbuff.txfrm.desc.tx_control = |
| HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) | |
| HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(1); |
| #elif defined(DOEXC) |
| hw->txbuff.txfrm.desc.tx_control = |
| HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) | |
| HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(0); |
| #else |
| hw->txbuff.txfrm.desc.tx_control = |
| HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) | |
| HFA384x_TX_TXEX_SET(0) | HFA384x_TX_TXOK_SET(0); |
| #endif |
| cpu_to_le16s(&hw->txbuff.txfrm.desc.tx_control); |
| |
| /* copy the header over to the txdesc */ |
| memcpy(&hw->txbuff.txfrm.desc.frame_control, p80211_hdr, |
| sizeof(union p80211_hdr)); |
| |
| /* if we're using host WEP, increase size by IV+ICV */ |
| if (p80211_wep->data) { |
| hw->txbuff.txfrm.desc.data_len = cpu_to_le16(skb->len + 8); |
| usbpktlen += 8; |
| } else { |
| hw->txbuff.txfrm.desc.data_len = cpu_to_le16(skb->len); |
| } |
| |
| usbpktlen += skb->len; |
| |
| /* copy over the WEP IV if we are using host WEP */ |
| ptr = hw->txbuff.txfrm.data; |
| if (p80211_wep->data) { |
| memcpy(ptr, p80211_wep->iv, sizeof(p80211_wep->iv)); |
| ptr += sizeof(p80211_wep->iv); |
| memcpy(ptr, p80211_wep->data, skb->len); |
| } else { |
| memcpy(ptr, skb->data, skb->len); |
| } |
| /* copy over the packet data */ |
| ptr += skb->len; |
| |
| /* copy over the WEP ICV if we are using host WEP */ |
| if (p80211_wep->data) |
| memcpy(ptr, p80211_wep->icv, sizeof(p80211_wep->icv)); |
| |
| /* Send the USB packet */ |
| usb_fill_bulk_urb(&hw->tx_urb, hw->usb, |
| hw->endp_out, |
| &hw->txbuff, ROUNDUP64(usbpktlen), |
| hfa384x_usbout_callback, hw->wlandev); |
| hw->tx_urb.transfer_flags |= USB_QUEUE_BULK; |
| |
| result = 1; |
| ret = submit_tx_urb(hw, &hw->tx_urb, GFP_ATOMIC); |
| if (ret != 0) { |
| netdev_err(hw->wlandev->netdev, |
| "submit_tx_urb() failed, error=%d\n", ret); |
| result = 3; |
| } |
| |
| exit: |
| return result; |
| } |
| |
| void hfa384x_tx_timeout(struct wlandevice *wlandev) |
| { |
| struct hfa384x *hw = wlandev->priv; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| if (!hw->wlandev->hwremoved) { |
| int sched; |
| |
| sched = !test_and_set_bit(WORK_TX_HALT, &hw->usb_flags); |
| sched |= !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags); |
| if (sched) |
| schedule_work(&hw->usb_work); |
| } |
| |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbctlx_reaper_task |
| * |
| * Tasklet to delete dead CTLX objects |
| * |
| * Arguments: |
| * data ptr to a struct hfa384x |
| * |
| * Returns: |
| * |
| * Call context: |
| * Interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usbctlx_reaper_task(unsigned long data) |
| { |
| struct hfa384x *hw = (struct hfa384x *)data; |
| struct hfa384x_usbctlx *ctlx, *temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| /* This list is guaranteed to be empty if someone |
| * has unplugged the adapter. |
| */ |
| list_for_each_entry_safe(ctlx, temp, &hw->ctlxq.reapable, list) { |
| list_del(&ctlx->list); |
| kfree(ctlx); |
| } |
| |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbctlx_completion_task |
| * |
| * Tasklet to call completion handlers for returned CTLXs |
| * |
| * Arguments: |
| * data ptr to struct hfa384x |
| * |
| * Returns: |
| * Nothing |
| * |
| * Call context: |
| * Interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usbctlx_completion_task(unsigned long data) |
| { |
| struct hfa384x *hw = (struct hfa384x *)data; |
| struct hfa384x_usbctlx *ctlx, *temp; |
| unsigned long flags; |
| |
| int reap = 0; |
| |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| /* This list is guaranteed to be empty if someone |
| * has unplugged the adapter ... |
| */ |
| list_for_each_entry_safe(ctlx, temp, &hw->ctlxq.completing, list) { |
| /* Call the completion function that this |
| * command was assigned, assuming it has one. |
| */ |
| if (ctlx->cmdcb) { |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| ctlx->cmdcb(hw, ctlx); |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| /* Make sure we don't try and complete |
| * this CTLX more than once! |
| */ |
| ctlx->cmdcb = NULL; |
| |
| /* Did someone yank the adapter out |
| * while our list was (briefly) unlocked? |
| */ |
| if (hw->wlandev->hwremoved) { |
| reap = 0; |
| break; |
| } |
| } |
| |
| /* |
| * "Reapable" CTLXs are ones which don't have any |
| * threads waiting for them to die. Hence they must |
| * be delivered to The Reaper! |
| */ |
| if (ctlx->reapable) { |
| /* Move the CTLX off the "completing" list (hopefully) |
| * on to the "reapable" list where the reaper task |
| * can find it. And "reapable" means that this CTLX |
| * isn't sitting on a wait-queue somewhere. |
| */ |
| list_move_tail(&ctlx->list, &hw->ctlxq.reapable); |
| reap = 1; |
| } |
| |
| complete(&ctlx->done); |
| } |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| |
| if (reap) |
| tasklet_schedule(&hw->reaper_bh); |
| } |
| |
| /*---------------------------------------------------------------- |
| * unlocked_usbctlx_cancel_async |
| * |
| * Mark the CTLX dead asynchronously, and ensure that the |
| * next command on the queue is run afterwards. |
| * |
| * Arguments: |
| * hw ptr to the struct hfa384x structure |
| * ctlx ptr to a CTLX structure |
| * |
| * Returns: |
| * 0 the CTLX's URB is inactive |
| * -EINPROGRESS the URB is currently being unlinked |
| * |
| * Call context: |
| * Either process or interrupt, but presumably interrupt |
| *---------------------------------------------------------------- |
| */ |
| static int unlocked_usbctlx_cancel_async(struct hfa384x *hw, |
| struct hfa384x_usbctlx *ctlx) |
| { |
| int ret; |
| |
| /* |
| * Try to delete the URB containing our request packet. |
| * If we succeed, then its completion handler will be |
| * called with a status of -ECONNRESET. |
| */ |
| hw->ctlx_urb.transfer_flags |= URB_ASYNC_UNLINK; |
| ret = usb_unlink_urb(&hw->ctlx_urb); |
| |
| if (ret != -EINPROGRESS) { |
| /* |
| * The OUT URB had either already completed |
| * or was still in the pending queue, so the |
| * URB's completion function will not be called. |
| * We will have to complete the CTLX ourselves. |
| */ |
| ctlx->state = CTLX_REQ_FAILED; |
| unlocked_usbctlx_complete(hw, ctlx); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /*---------------------------------------------------------------- |
| * unlocked_usbctlx_complete |
| * |
| * A CTLX has completed. It may have been successful, it may not |
| * have been. At this point, the CTLX should be quiescent. The URBs |
| * aren't active and the timers should have been stopped. |
| * |
| * The CTLX is migrated to the "completing" queue, and the completing |
| * tasklet is scheduled. |
| * |
| * Arguments: |
| * hw ptr to a struct hfa384x structure |
| * ctlx ptr to a ctlx structure |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * Either, assume interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void unlocked_usbctlx_complete(struct hfa384x *hw, |
| struct hfa384x_usbctlx *ctlx) |
| { |
| /* Timers have been stopped, and ctlx should be in |
| * a terminal state. Retire it from the "active" |
| * queue. |
| */ |
| list_move_tail(&ctlx->list, &hw->ctlxq.completing); |
| tasklet_schedule(&hw->completion_bh); |
| |
| switch (ctlx->state) { |
| case CTLX_COMPLETE: |
| case CTLX_REQ_FAILED: |
| /* This are the correct terminating states. */ |
| break; |
| |
| default: |
| netdev_err(hw->wlandev->netdev, "CTLX[%d] not in a terminating state(%s)\n", |
| le16_to_cpu(ctlx->outbuf.type), |
| ctlxstr(ctlx->state)); |
| break; |
| } /* switch */ |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbctlxq_run |
| * |
| * Checks to see if the head item is running. If not, starts it. |
| * |
| * Arguments: |
| * hw ptr to struct hfa384x |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * any |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usbctlxq_run(struct hfa384x *hw) |
| { |
| unsigned long flags; |
| |
| /* acquire lock */ |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| /* Only one active CTLX at any one time, because there's no |
| * other (reliable) way to match the response URB to the |
| * correct CTLX. |
| * |
| * Don't touch any of these CTLXs if the hardware |
| * has been removed or the USB subsystem is stalled. |
| */ |
| if (!list_empty(&hw->ctlxq.active) || |
| test_bit(WORK_TX_HALT, &hw->usb_flags) || hw->wlandev->hwremoved) |
| goto unlock; |
| |
| while (!list_empty(&hw->ctlxq.pending)) { |
| struct hfa384x_usbctlx *head; |
| int result; |
| |
| /* This is the first pending command */ |
| head = list_entry(hw->ctlxq.pending.next, |
| struct hfa384x_usbctlx, list); |
| |
| /* We need to split this off to avoid a race condition */ |
| list_move_tail(&head->list, &hw->ctlxq.active); |
| |
| /* Fill the out packet */ |
| usb_fill_bulk_urb(&hw->ctlx_urb, hw->usb, |
| hw->endp_out, |
| &head->outbuf, ROUNDUP64(head->outbufsize), |
| hfa384x_ctlxout_callback, hw); |
| hw->ctlx_urb.transfer_flags |= USB_QUEUE_BULK; |
| |
| /* Now submit the URB and update the CTLX's state */ |
| result = usb_submit_urb(&hw->ctlx_urb, GFP_ATOMIC); |
| if (result == 0) { |
| /* This CTLX is now running on the active queue */ |
| head->state = CTLX_REQ_SUBMITTED; |
| |
| /* Start the OUT wait timer */ |
| hw->req_timer_done = 0; |
| hw->reqtimer.expires = jiffies + HZ; |
| add_timer(&hw->reqtimer); |
| |
| /* Start the IN wait timer */ |
| hw->resp_timer_done = 0; |
| hw->resptimer.expires = jiffies + 2 * HZ; |
| add_timer(&hw->resptimer); |
| |
| break; |
| } |
| |
| if (result == -EPIPE) { |
| /* The OUT pipe needs resetting, so put |
| * this CTLX back in the "pending" queue |
| * and schedule a reset ... |
| */ |
| netdev_warn(hw->wlandev->netdev, |
| "%s tx pipe stalled: requesting reset\n", |
| hw->wlandev->netdev->name); |
| list_move(&head->list, &hw->ctlxq.pending); |
| set_bit(WORK_TX_HALT, &hw->usb_flags); |
| schedule_work(&hw->usb_work); |
| break; |
| } |
| |
| if (result == -ESHUTDOWN) { |
| netdev_warn(hw->wlandev->netdev, "%s urb shutdown!\n", |
| hw->wlandev->netdev->name); |
| break; |
| } |
| |
| netdev_err(hw->wlandev->netdev, "Failed to submit CTLX[%d]: error=%d\n", |
| le16_to_cpu(head->outbuf.type), result); |
| unlocked_usbctlx_complete(hw, head); |
| } /* while */ |
| |
| unlock: |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbin_callback |
| * |
| * Callback for URBs on the BULKIN endpoint. |
| * |
| * Arguments: |
| * urb ptr to the completed urb |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usbin_callback(struct urb *urb) |
| { |
| struct wlandevice *wlandev = urb->context; |
| struct hfa384x *hw; |
| union hfa384x_usbin *usbin; |
| struct sk_buff *skb = NULL; |
| int result; |
| int urb_status; |
| u16 type; |
| |
| enum USBIN_ACTION { |
| HANDLE, |
| RESUBMIT, |
| ABORT |
| } action; |
| |
| if (!wlandev || !wlandev->netdev || wlandev->hwremoved) |
| goto exit; |
| |
| hw = wlandev->priv; |
| if (!hw) |
| goto exit; |
| |
| skb = hw->rx_urb_skb; |
| if (!skb || (skb->data != urb->transfer_buffer)) { |
| WARN_ON(1); |
| return; |
| } |
| |
| hw->rx_urb_skb = NULL; |
| |
| /* Check for error conditions within the URB */ |
| switch (urb->status) { |
| case 0: |
| action = HANDLE; |
| |
| /* Check for short packet */ |
| if (urb->actual_length == 0) { |
| wlandev->netdev->stats.rx_errors++; |
| wlandev->netdev->stats.rx_length_errors++; |
| action = RESUBMIT; |
| } |
| break; |
| |
| case -EPIPE: |
| netdev_warn(hw->wlandev->netdev, "%s rx pipe stalled: requesting reset\n", |
| wlandev->netdev->name); |
| if (!test_and_set_bit(WORK_RX_HALT, &hw->usb_flags)) |
| schedule_work(&hw->usb_work); |
| wlandev->netdev->stats.rx_errors++; |
| action = ABORT; |
| break; |
| |
| case -EILSEQ: |
| case -ETIMEDOUT: |
| case -EPROTO: |
| if (!test_and_set_bit(THROTTLE_RX, &hw->usb_flags) && |
| !timer_pending(&hw->throttle)) { |
| mod_timer(&hw->throttle, jiffies + THROTTLE_JIFFIES); |
| } |
| wlandev->netdev->stats.rx_errors++; |
| action = ABORT; |
| break; |
| |
| case -EOVERFLOW: |
| wlandev->netdev->stats.rx_over_errors++; |
| action = RESUBMIT; |
| break; |
| |
| case -ENODEV: |
| case -ESHUTDOWN: |
| pr_debug("status=%d, device removed.\n", urb->status); |
| action = ABORT; |
| break; |
| |
| case -ENOENT: |
| case -ECONNRESET: |
| pr_debug("status=%d, urb explicitly unlinked.\n", urb->status); |
| action = ABORT; |
| break; |
| |
| default: |
| pr_debug("urb status=%d, transfer flags=0x%x\n", |
| urb->status, urb->transfer_flags); |
| wlandev->netdev->stats.rx_errors++; |
| action = RESUBMIT; |
| break; |
| } |
| |
| urb_status = urb->status; |
| |
| if (action != ABORT) { |
| /* Repost the RX URB */ |
| result = submit_rx_urb(hw, GFP_ATOMIC); |
| |
| if (result != 0) { |
| netdev_err(hw->wlandev->netdev, |
| "Fatal, failed to resubmit rx_urb. error=%d\n", |
| result); |
| } |
| } |
| |
| /* Handle any USB-IN packet */ |
| /* Note: the check of the sw_support field, the type field doesn't |
| * have bit 12 set like the docs suggest. |
| */ |
| usbin = (union hfa384x_usbin *)urb->transfer_buffer; |
| type = le16_to_cpu(usbin->type); |
| if (HFA384x_USB_ISRXFRM(type)) { |
| if (action == HANDLE) { |
| if (usbin->txfrm.desc.sw_support == 0x0123) { |
| hfa384x_usbin_txcompl(wlandev, usbin); |
| } else { |
| skb_put(skb, sizeof(*usbin)); |
| hfa384x_usbin_rx(wlandev, skb); |
| skb = NULL; |
| } |
| } |
| goto exit; |
| } |
| if (HFA384x_USB_ISTXFRM(type)) { |
| if (action == HANDLE) |
| hfa384x_usbin_txcompl(wlandev, usbin); |
| goto exit; |
| } |
| switch (type) { |
| case HFA384x_USB_INFOFRM: |
| if (action == ABORT) |
| goto exit; |
| if (action == HANDLE) |
| hfa384x_usbin_info(wlandev, usbin); |
| break; |
| |
| case HFA384x_USB_CMDRESP: |
| case HFA384x_USB_WRIDRESP: |
| case HFA384x_USB_RRIDRESP: |
| case HFA384x_USB_WMEMRESP: |
| case HFA384x_USB_RMEMRESP: |
| /* ALWAYS, ALWAYS, ALWAYS handle this CTLX!!!! */ |
| hfa384x_usbin_ctlx(hw, usbin, urb_status); |
| break; |
| |
| case HFA384x_USB_BUFAVAIL: |
| pr_debug("Received BUFAVAIL packet, frmlen=%d\n", |
| usbin->bufavail.frmlen); |
| break; |
| |
| case HFA384x_USB_ERROR: |
| pr_debug("Received USB_ERROR packet, errortype=%d\n", |
| usbin->usberror.errortype); |
| break; |
| |
| default: |
| pr_debug("Unrecognized USBIN packet, type=%x, status=%d\n", |
| usbin->type, urb_status); |
| break; |
| } /* switch */ |
| |
| exit: |
| |
| if (skb) |
| dev_kfree_skb(skb); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbin_ctlx |
| * |
| * We've received a URB containing a Prism2 "response" message. |
| * This message needs to be matched up with a CTLX on the active |
| * queue and our state updated accordingly. |
| * |
| * Arguments: |
| * hw ptr to struct hfa384x |
| * usbin ptr to USB IN packet |
| * urb_status status of this Bulk-In URB |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usbin_ctlx(struct hfa384x *hw, union hfa384x_usbin *usbin, |
| int urb_status) |
| { |
| struct hfa384x_usbctlx *ctlx; |
| int run_queue = 0; |
| unsigned long flags; |
| |
| retry: |
| spin_lock_irqsave(&hw->ctlxq.lock, flags); |
| |
| /* There can be only one CTLX on the active queue |
| * at any one time, and this is the CTLX that the |
| * timers are waiting for. |
| */ |
| if (list_empty(&hw->ctlxq.active)) |
| goto unlock; |
| |
| /* Remove the "response timeout". It's possible that |
| * we are already too late, and that the timeout is |
| * already running. And that's just too bad for us, |
| * because we could lose our CTLX from the active |
| * queue here ... |
| */ |
| if (del_timer(&hw->resptimer) == 0) { |
| if (hw->resp_timer_done == 0) { |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| goto retry; |
| } |
| } else { |
| hw->resp_timer_done = 1; |
| } |
| |
| ctlx = get_active_ctlx(hw); |
| |
| if (urb_status != 0) { |
| /* |
| * Bad CTLX, so get rid of it. But we only |
| * remove it from the active queue if we're no |
| * longer expecting the OUT URB to complete. |
| */ |
| if (unlocked_usbctlx_cancel_async(hw, ctlx) == 0) |
| run_queue = 1; |
| } else { |
| const __le16 intype = (usbin->type & ~cpu_to_le16(0x8000)); |
| |
| /* |
| * Check that our message is what we're expecting ... |
| */ |
| if (ctlx->outbuf.type != intype) { |
| netdev_warn(hw->wlandev->netdev, |
| "Expected IN[%d], received IN[%d] - ignored.\n", |
| le16_to_cpu(ctlx->outbuf.type), |
| le16_to_cpu(intype)); |
| goto unlock; |
| } |
| |
| /* This URB has succeeded, so grab the data ... */ |
| memcpy(&ctlx->inbuf, usbin, sizeof(ctlx->inbuf)); |
| |
| switch (ctlx->state) { |
| case CTLX_REQ_SUBMITTED: |
| /* |
| * We have received our response URB before |
| * our request has been acknowledged. Odd, |
| * but our OUT URB is still alive... |
| */ |
| pr_debug("Causality violation: please reboot Universe\n"); |
| ctlx->state = CTLX_RESP_COMPLETE; |
| break; |
| |
| case CTLX_REQ_COMPLETE: |
| /* |
| * This is the usual path: our request |
| * has already been acknowledged, and |
| * now we have received the reply too. |
| */ |
| ctlx->state = CTLX_COMPLETE; |
| unlocked_usbctlx_complete(hw, ctlx); |
| run_queue = 1; |
| break; |
| |
| default: |
| /* |
| * Throw this CTLX away ... |
| */ |
| netdev_err(hw->wlandev->netdev, |
| "Matched IN URB, CTLX[%d] in invalid state(%s). Discarded.\n", |
| le16_to_cpu(ctlx->outbuf.type), |
| ctlxstr(ctlx->state)); |
| if (unlocked_usbctlx_cancel_async(hw, ctlx) == 0) |
| run_queue = 1; |
| break; |
| } /* switch */ |
| } |
| |
| unlock: |
| spin_unlock_irqrestore(&hw->ctlxq.lock, flags); |
| |
| if (run_queue) |
| hfa384x_usbctlxq_run(hw); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbin_txcompl |
| * |
| * At this point we have the results of a previous transmit. |
| * |
| * Arguments: |
| * wlandev wlan device |
| * usbin ptr to the usb transfer buffer |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usbin_txcompl(struct wlandevice *wlandev, |
| union hfa384x_usbin *usbin) |
| { |
| u16 status; |
| |
| status = le16_to_cpu(usbin->type); /* yeah I know it says type... */ |
| |
| /* Was there an error? */ |
| if (HFA384x_TXSTATUS_ISERROR(status)) |
| prism2sta_ev_txexc(wlandev, status); |
| else |
| prism2sta_ev_tx(wlandev, status); |
| } |
| |
| /*---------------------------------------------------------------- |
| * hfa384x_usbin_rx |
| * |
| * At this point we have a successful received a rx frame packet. |
| * |
| * Arguments: |
| * wlandev wlan device |
| * usbin ptr to the usb transfer buffer |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| *---------------------------------------------------------------- |
| */ |
| static void hfa384x_usbin_rx(struct wlandevice *wlandev, struct sk_buff *skb) |
| { |
| union hfa384x_usbin *usbin = (union hfa384x_usbin *)skb->data; |
| struct hfa384x *hw = wlandev->priv; |
| int hdrlen; |
| struct p80211_rxmeta *rxmeta; |
| u16 data_len; |
| u16 fc; |
| |
| /* Byte order convert once up front. */ |
| le16_to_cpus(&usbin->rxfrm.desc.status); |
| le32_to_cpus(&usbin->rxfrm.desc.time); |
| |
| /* Now handle frame based on port# */ |
| switch (HFA384x_RXSTATUS_MACPORT_GET(usbin->rxfrm.desc.status)) { |
| case 0: |
| fc = le16_to_cpu(usbin->rxfrm.desc.frame_control); |
| |
| /* If exclude and we receive an unencrypted, drop it */ |
| if ((wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED) && |
| !WLAN_GET_FC_ISWEP(fc)) { |
| break; |
| } |
| |
| data_len = le16_to_cpu(usbin->rxfrm.desc.data_len); |
| |
| /* How much header data do we have? */ |
| hdrlen = p80211_headerlen(fc); |
| |
| /* Pull off the descriptor */ |
| skb_pull(skb, sizeof(struct hfa384x_rx_frame)); |
| |
| /* Now shunt the header block up against the data block |
| * with an "overlapping" copy |
| */ |
| memmove(skb_push(skb, hdrlen), |
| &usbin->rxfrm.desc.frame_control, hdrlen); |
| |
| skb->dev = wlandev->netdev; |
| |
| /* And set the frame length properly */ |
| skb_trim(skb, data_len + hdrlen); |
| |
| /* The prism2 series does not return the CRC */ |
| memset(skb_put(skb, WLAN_CRC_LEN), 0x
|