blob: 347f0389b0899d4183021254203e0a0938600267 [file] [log] [blame]
/*
* intel TCO Watchdog Driver
*
* (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
* The TCO watchdog is implemented in the following I/O controller hubs:
* (See the intel documentation on http://developer.intel.com.)
* document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO)
* document number 290687-002, 298242-027: 82801BA (ICH2)
* document number 290733-003, 290739-013: 82801CA (ICH3-S)
* document number 290716-001, 290718-007: 82801CAM (ICH3-M)
* document number 290744-001, 290745-025: 82801DB (ICH4)
* document number 252337-001, 252663-008: 82801DBM (ICH4-M)
* document number 273599-001, 273645-002: 82801E (C-ICH)
* document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R)
* document number 300641-004, 300884-013: 6300ESB
* document number 301473-002, 301474-026: 82801F (ICH6)
* document number 313082-001, 313075-006: 631xESB, 632xESB
* document number 307013-003, 307014-024: 82801G (ICH7)
* document number 322896-001, 322897-001: NM10
* document number 313056-003, 313057-017: 82801H (ICH8)
* document number 316972-004, 316973-012: 82801I (ICH9)
* document number 319973-002, 319974-002: 82801J (ICH10)
* document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
* document number 324645-001, 324646-001: Cougar Point (CPT)
* document number TBD : Patsburg (PBG)
* document number TBD : DH89xxCC
* document number TBD : Panther Point
* document number TBD : Lynx Point
* document number TBD : Lynx Point-LP
*/
/*
* Includes, defines, variables, module parameters, ...
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
#define DRV_VERSION "1.11"
/* Includes */
#include <linux/acpi.h> /* For ACPI support */
#include <linux/module.h> /* For module specific items */
#include <linux/moduleparam.h> /* For new moduleparam's */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/kernel.h> /* For printk/panic/... */
#include <linux/watchdog.h> /* For the watchdog specific items */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/fs.h> /* For file operations */
#include <linux/platform_device.h> /* For platform_driver framework */
#include <linux/pci.h> /* For pci functions */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
#include <linux/io.h> /* For inb/outb/... */
#include <linux/platform_data/itco_wdt.h>
#include "iTCO_vendor.h"
/* Address definitions for the TCO */
/* TCO base address */
#define TCOBASE(p) ((p)->tco_res->start)
/* SMI Control and Enable Register */
#define SMI_EN(p) ((p)->smi_res->start)
#define TCO_RLD(p) (TCOBASE(p) + 0x00) /* TCO Timer Reload/Curr. Value */
#define TCOv1_TMR(p) (TCOBASE(p) + 0x01) /* TCOv1 Timer Initial Value*/
#define TCO_DAT_IN(p) (TCOBASE(p) + 0x02) /* TCO Data In Register */
#define TCO_DAT_OUT(p) (TCOBASE(p) + 0x03) /* TCO Data Out Register */
#define TCO1_STS(p) (TCOBASE(p) + 0x04) /* TCO1 Status Register */
#define TCO2_STS(p) (TCOBASE(p) + 0x06) /* TCO2 Status Register */
#define TCO1_CNT(p) (TCOBASE(p) + 0x08) /* TCO1 Control Register */
#define TCO2_CNT(p) (TCOBASE(p) + 0x0a) /* TCO2 Control Register */
#define TCOv2_TMR(p) (TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/
/* internal variables */
struct iTCO_wdt_private {
struct watchdog_device wddev;
/* TCO version/generation */
unsigned int iTCO_version;
struct resource *tco_res;
struct resource *smi_res;
/*
* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2),
* or memory-mapped PMC register bit 4 (TCO version 3).
*/
struct resource *gcs_pmc_res;
unsigned long __iomem *gcs_pmc;
/* the lock for io operations */
spinlock_t io_lock;
/* the PCI-device */
struct pci_dev *pci_dev;
/* whether or not the watchdog has been suspended */
bool suspended;
/* no reboot API private data */
void *no_reboot_priv;
/* no reboot update function pointer */
int (*update_no_reboot_bit)(void *p, bool set);
};
/* module parameters */
#define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */
static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. "
"5..76 (TCO v1) or 3..614 (TCO v2), default="
__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static int turn_SMI_watchdog_clear_off = 1;
module_param(turn_SMI_watchdog_clear_off, int, 0);
MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
"Turn off SMI clearing watchdog (depends on TCO-version)(default=1)");
/*
* Some TCO specific functions
*/
/*
* The iTCO v1 and v2's internal timer is stored as ticks which decrement
* every 0.6 seconds. v3's internal timer is stored as seconds (some
* datasheets incorrectly state 0.6 seconds).
*/
static inline unsigned int seconds_to_ticks(struct iTCO_wdt_private *p,
int secs)
{
return p->iTCO_version == 3 ? secs : (secs * 10) / 6;
}
static inline unsigned int ticks_to_seconds(struct iTCO_wdt_private *p,
int ticks)
{
return p->iTCO_version == 3 ? ticks : (ticks * 6) / 10;
}
static inline u32 no_reboot_bit(struct iTCO_wdt_private *p)
{
u32 enable_bit;
switch (p->iTCO_version) {
case 5:
case 3:
enable_bit = 0x00000010;
break;
case 2:
enable_bit = 0x00000020;
break;
case 4:
case 1:
default:
enable_bit = 0x00000002;
break;
}
return enable_bit;
}
static int update_no_reboot_bit_def(void *priv, bool set)
{
return 0;
}
static int update_no_reboot_bit_pci(void *priv, bool set)
{
struct iTCO_wdt_private *p = priv;
u32 val32 = 0, newval32 = 0;
pci_read_config_dword(p->pci_dev, 0xd4, &val32);
if (set)
val32 |= no_reboot_bit(p);
else
val32 &= ~no_reboot_bit(p);
pci_write_config_dword(p->pci_dev, 0xd4, val32);
pci_read_config_dword(p->pci_dev, 0xd4, &newval32);
/* make sure the update is successful */
if (val32 != newval32)
return -EIO;
return 0;
}
static int update_no_reboot_bit_mem(void *priv, bool set)
{
struct iTCO_wdt_private *p = priv;
u32 val32 = 0, newval32 = 0;
val32 = readl(p->gcs_pmc);
if (set)
val32 |= no_reboot_bit(p);
else
val32 &= ~no_reboot_bit(p);
writel(val32, p->gcs_pmc);
newval32 = readl(p->gcs_pmc);
/* make sure the update is successful */
if (val32 != newval32)
return -EIO;
return 0;
}
static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
struct itco_wdt_platform_data *pdata)
{
if (pdata->update_no_reboot_bit) {
p->update_no_reboot_bit = pdata->update_no_reboot_bit;
p->no_reboot_priv = pdata->no_reboot_priv;
return;
}
if (p->iTCO_version >= 2)
p->update_no_reboot_bit = update_no_reboot_bit_mem;
else if (p->iTCO_version == 1)
p->update_no_reboot_bit = update_no_reboot_bit_pci;
else
p->update_no_reboot_bit = update_no_reboot_bit_def;
p->no_reboot_priv = p;
}
static int iTCO_wdt_start(struct watchdog_device *wd_dev)
{
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
unsigned int val;
spin_lock(&p->io_lock);
iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout);
/* disable chipset's NO_REBOOT bit */
if (p->update_no_reboot_bit(p->no_reboot_priv, false)) {
spin_unlock(&p->io_lock);
pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
return -EIO;
}
/* Force the timer to its reload value by writing to the TCO_RLD
register */
if (p->iTCO_version >= 2)
outw(0x01, TCO_RLD(p));
else if (p->iTCO_version == 1)
outb(0x01, TCO_RLD(p));
/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
val = inw(TCO1_CNT(p));
val &= 0xf7ff;
outw(val, TCO1_CNT(p));
val = inw(TCO1_CNT(p));
spin_unlock(&p->io_lock);
if (val & 0x0800)
return -1;
return 0;
}
static int iTCO_wdt_stop(struct watchdog_device *wd_dev)
{
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
unsigned int val;
spin_lock(&p->io_lock);
iTCO_vendor_pre_stop(p->smi_res);
/* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
val = inw(TCO1_CNT(p));
val |= 0x0800;
outw(val, TCO1_CNT(p));
val = inw(TCO1_CNT(p));
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
p->update_no_reboot_bit(p->no_reboot_priv, true);
spin_unlock(&p->io_lock);
if ((val & 0x0800) == 0)
return -1;
return 0;
}
static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
{
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
spin_lock(&p->io_lock);
iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
/* Reload the timer by writing to the TCO Timer Counter register */
if (p->iTCO_version >= 2) {
outw(0x01, TCO_RLD(p));
} else if (p->iTCO_version == 1) {
/* Reset the timeout status bit so that the timer
* needs to count down twice again before rebooting */
outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
outb(0x01, TCO_RLD(p));
}
spin_unlock(&p->io_lock);
return 0;
}
static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
{
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
unsigned int val16;
unsigned char val8;
unsigned int tmrval;
tmrval = seconds_to_ticks(p, t);
/* For TCO v1 the timer counts down twice before rebooting */
if (p->iTCO_version == 1)
tmrval /= 2;
/* from the specs: */
/* "Values of 0h-3h are ignored and should not be attempted" */
if (tmrval < 0x04)
return -EINVAL;
if ((p->iTCO_version >= 2 && tmrval > 0x3ff) ||
(p->iTCO_version == 1 && tmrval > 0x03f))
return -EINVAL;
iTCO_vendor_pre_set_heartbeat(tmrval);
/* Write new heartbeat to watchdog */
if (p->iTCO_version >= 2) {
spin_lock(&p->io_lock);
val16 = inw(TCOv2_TMR(p));
val16 &= 0xfc00;
val16 |= tmrval;
outw(val16, TCOv2_TMR(p));
val16 = inw(TCOv2_TMR(p));
spin_unlock(&p->io_lock);
if ((val16 & 0x3ff) != tmrval)
return -EINVAL;
} else if (p->iTCO_version == 1) {
spin_lock(&p->io_lock);
val8 = inb(TCOv1_TMR(p));
val8 &= 0xc0;
val8 |= (tmrval & 0xff);
outb(val8, TCOv1_TMR(p));
val8 = inb(TCOv1_TMR(p));
spin_unlock(&p->io_lock);
if ((val8 & 0x3f) != tmrval)
return -EINVAL;
}
wd_dev->timeout = t;
return 0;
}
static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
{
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
unsigned int val16;
unsigned char val8;
unsigned int time_left = 0;
/* read the TCO Timer */
if (p->iTCO_version >= 2) {
spin_lock(&p->io_lock);
val16 = inw(TCO_RLD(p));
val16 &= 0x3ff;
spin_unlock(&p->io_lock);
time_left = ticks_to_seconds(p, val16);
} else if (p->iTCO_version == 1) {
spin_lock(&p->io_lock);
val8 = inb(TCO_RLD(p));
val8 &= 0x3f;
if (!(inw(TCO1_STS(p)) & 0x0008))
val8 += (inb(TCOv1_TMR(p)) & 0x3f);
spin_unlock(&p->io_lock);
time_left = ticks_to_seconds(p, val8);
}
return time_left;
}
/*
* Kernel Interfaces
*/
static const struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.firmware_version = 0,
.identity = DRV_NAME,
};
static const struct watchdog_ops iTCO_wdt_ops = {
.owner = THIS_MODULE,
.start = iTCO_wdt_start,
.stop = iTCO_wdt_stop,
.ping = iTCO_wdt_ping,
.set_timeout = iTCO_wdt_set_timeout,
.get_timeleft = iTCO_wdt_get_timeleft,
};
/*
* Init & exit routines
*/
static int iTCO_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct itco_wdt_platform_data *pdata = dev_get_platdata(dev);
struct iTCO_wdt_private *p;
unsigned long val32;
int ret;
if (!pdata)
return -ENODEV;
p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
if (!p)
return -ENOMEM;
spin_lock_init(&p->io_lock);
p->tco_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_TCO);
if (!p->tco_res)
return -ENODEV;
p->smi_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_SMI);
if (!p->smi_res)
return -ENODEV;
p->iTCO_version = pdata->version;
p->pci_dev = to_pci_dev(dev->parent);
iTCO_wdt_no_reboot_bit_setup(p, pdata);
/*
* Get the Memory-Mapped GCS or PMC register, we need it for the
* NO_REBOOT flag (TCO v2 and v3).
*/
if (p->iTCO_version >= 2 && !pdata->update_no_reboot_bit) {
p->gcs_pmc_res = platform_get_resource(pdev,
IORESOURCE_MEM,
ICH_RES_MEM_GCS_PMC);
p->gcs_pmc = devm_ioremap_resource(dev, p->gcs_pmc_res);
if (IS_ERR(p->gcs_pmc))
return PTR_ERR(p->gcs_pmc);
}
/* Check chipset's NO_REBOOT bit */
if (p->update_no_reboot_bit(p->no_reboot_priv, false) &&
iTCO_vendor_check_noreboot_on()) {
pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
return -ENODEV; /* Cannot reset NO_REBOOT bit */
}
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
p->update_no_reboot_bit(p->no_reboot_priv, true);
/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
if (!devm_request_region(dev, p->smi_res->start,
resource_size(p->smi_res),
pdev->name)) {
pr_err("I/O address 0x%04llx already in use, device disabled\n",
(u64)SMI_EN(p));
return -EBUSY;
}
if (turn_SMI_watchdog_clear_off >= p->iTCO_version) {
/*
* Bit 13: TCO_EN -> 0
* Disables TCO logic generating an SMI#
*/
val32 = inl(SMI_EN(p));
val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
outl(val32, SMI_EN(p));
}
if (!devm_request_region(dev, p->tco_res->start,
resource_size(p->tco_res),
pdev->name)) {
pr_err("I/O address 0x%04llx already in use, device disabled\n",
(u64)TCOBASE(p));
return -EBUSY;
}
pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
pdata->name, pdata->version, (u64)TCOBASE(p));
/* Clear out the (probably old) status */
switch (p->iTCO_version) {
case 5:
case 4:
outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */
break;
case 3:
outl(0x20008, TCO1_STS(p));
break;
case 2:
case 1:
default:
outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */
outw(0x0004, TCO2_STS(p)); /* Clear BOOT_STS bit */
break;
}
p->wddev.info = &ident,
p->wddev.ops = &iTCO_wdt_ops,
p->wddev.bootstatus = 0;
p->wddev.timeout = WATCHDOG_TIMEOUT;
watchdog_set_nowayout(&p->wddev, nowayout);
p->wddev.parent = dev;
watchdog_set_drvdata(&p->wddev, p);
platform_set_drvdata(pdev, p);
/* Make sure the watchdog is not running */
iTCO_wdt_stop(&p->wddev);
/* Check that the heartbeat value is within it's range;
if not reset to the default */
if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) {
iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT);
pr_info("timeout value out of range, using %d\n",
WATCHDOG_TIMEOUT);
}
watchdog_stop_on_reboot(&p->wddev);
ret = devm_watchdog_register_device(dev, &p->wddev);
if (ret != 0) {
pr_err("cannot register watchdog device (err=%d)\n", ret);
return ret;
}
pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
return 0;
}
static int iTCO_wdt_remove(struct platform_device *pdev)
{
struct iTCO_wdt_private *p = platform_get_drvdata(pdev);
/* Stop the timer before we leave */
if (!nowayout)
iTCO_wdt_stop(&p->wddev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
/*
* Suspend-to-idle requires this, because it stops the ticks and timekeeping, so
* the watchdog cannot be pinged while in that state. In ACPI sleep states the
* watchdog is stopped by the platform firmware.
*/
#ifdef CONFIG_ACPI
static inline bool need_suspend(void)
{
return acpi_target_system_state() == ACPI_STATE_S0;
}
#else
static inline bool need_suspend(void) { return true; }
#endif
static int iTCO_wdt_suspend_noirq(struct device *dev)
{
struct iTCO_wdt_private *p = dev_get_drvdata(dev);
int ret = 0;
p->suspended = false;
if (watchdog_active(&p->wddev) && need_suspend()) {
ret = iTCO_wdt_stop(&p->wddev);
if (!ret)
p->suspended = true;
}
return ret;
}
static int iTCO_wdt_resume_noirq(struct device *dev)
{
struct iTCO_wdt_private *p = dev_get_drvdata(dev);
if (p->suspended)
iTCO_wdt_start(&p->wddev);
return 0;
}
static const struct dev_pm_ops iTCO_wdt_pm = {
.suspend_noirq = iTCO_wdt_suspend_noirq,
.resume_noirq = iTCO_wdt_resume_noirq,
};
#define ITCO_WDT_PM_OPS (&iTCO_wdt_pm)
#else
#define ITCO_WDT_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
static struct platform_driver iTCO_wdt_driver = {
.probe = iTCO_wdt_probe,
.remove = iTCO_wdt_remove,
.driver = {
.name = DRV_NAME,
.pm = ITCO_WDT_PM_OPS,
},
};
static int __init iTCO_wdt_init_module(void)
{
pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION);
return platform_driver_register(&iTCO_wdt_driver);
}
static void __exit iTCO_wdt_cleanup_module(void)
{
platform_driver_unregister(&iTCO_wdt_driver);
pr_info("Watchdog Module Unloaded\n");
}
module_init(iTCO_wdt_init_module);
module_exit(iTCO_wdt_cleanup_module);
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);