| /* |
| * s2mps14.h |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #ifndef __LINUX_MFD_S2MPS14_H |
| #define __LINUX_MFD_S2MPS14_H |
| |
| /* S2MPS14 registers */ |
| enum s2mps14_reg { |
| S2MPS14_REG_ID, |
| S2MPS14_REG_INT1, |
| S2MPS14_REG_INT2, |
| S2MPS14_REG_INT3, |
| S2MPS14_REG_INT1M, |
| S2MPS14_REG_INT2M, |
| S2MPS14_REG_INT3M, |
| S2MPS14_REG_ST1, |
| S2MPS14_REG_ST2, |
| S2MPS14_REG_PWRONSRC, |
| S2MPS14_REG_OFFSRC, |
| S2MPS14_REG_BU_CHG, |
| S2MPS14_REG_RTCCTRL, |
| S2MPS14_REG_CTRL1, |
| S2MPS14_REG_CTRL2, |
| S2MPS14_REG_RSVD1, |
| S2MPS14_REG_RSVD2, |
| S2MPS14_REG_RSVD3, |
| S2MPS14_REG_RSVD4, |
| S2MPS14_REG_RSVD5, |
| S2MPS14_REG_RSVD6, |
| S2MPS14_REG_CTRL3, |
| S2MPS14_REG_RSVD7, |
| S2MPS14_REG_RSVD8, |
| S2MPS14_REG_WRSTBI, |
| S2MPS14_REG_B1CTRL1, |
| S2MPS14_REG_B1CTRL2, |
| S2MPS14_REG_B2CTRL1, |
| S2MPS14_REG_B2CTRL2, |
| S2MPS14_REG_B3CTRL1, |
| S2MPS14_REG_B3CTRL2, |
| S2MPS14_REG_B4CTRL1, |
| S2MPS14_REG_B4CTRL2, |
| S2MPS14_REG_B5CTRL1, |
| S2MPS14_REG_B5CTRL2, |
| S2MPS14_REG_L1CTRL, |
| S2MPS14_REG_L2CTRL, |
| S2MPS14_REG_L3CTRL, |
| S2MPS14_REG_L4CTRL, |
| S2MPS14_REG_L5CTRL, |
| S2MPS14_REG_L6CTRL, |
| S2MPS14_REG_L7CTRL, |
| S2MPS14_REG_L8CTRL, |
| S2MPS14_REG_L9CTRL, |
| S2MPS14_REG_L10CTRL, |
| S2MPS14_REG_L11CTRL, |
| S2MPS14_REG_L12CTRL, |
| S2MPS14_REG_L13CTRL, |
| S2MPS14_REG_L14CTRL, |
| S2MPS14_REG_L15CTRL, |
| S2MPS14_REG_L16CTRL, |
| S2MPS14_REG_L17CTRL, |
| S2MPS14_REG_L18CTRL, |
| S2MPS14_REG_L19CTRL, |
| S2MPS14_REG_L20CTRL, |
| S2MPS14_REG_L21CTRL, |
| S2MPS14_REG_L22CTRL, |
| S2MPS14_REG_L23CTRL, |
| S2MPS14_REG_L24CTRL, |
| S2MPS14_REG_L25CTRL, |
| S2MPS14_REG_LDODSCH1, |
| S2MPS14_REG_LDODSCH2, |
| S2MPS14_REG_LDODSCH3, |
| }; |
| |
| /* S2MPS14 regulator ids */ |
| enum s2mps14_regulators { |
| S2MPS14_LDO1, |
| S2MPS14_LDO2, |
| S2MPS14_LDO3, |
| S2MPS14_LDO4, |
| S2MPS14_LDO5, |
| S2MPS14_LDO6, |
| S2MPS14_LDO7, |
| S2MPS14_LDO8, |
| S2MPS14_LDO9, |
| S2MPS14_LDO10, |
| S2MPS14_LDO11, |
| S2MPS14_LDO12, |
| S2MPS14_LDO13, |
| S2MPS14_LDO14, |
| S2MPS14_LDO15, |
| S2MPS14_LDO16, |
| S2MPS14_LDO17, |
| S2MPS14_LDO18, |
| S2MPS14_LDO19, |
| S2MPS14_LDO20, |
| S2MPS14_LDO21, |
| S2MPS14_LDO22, |
| S2MPS14_LDO23, |
| S2MPS14_LDO24, |
| S2MPS14_LDO25, |
| S2MPS14_BUCK1, |
| S2MPS14_BUCK2, |
| S2MPS14_BUCK3, |
| S2MPS14_BUCK4, |
| S2MPS14_BUCK5, |
| |
| S2MPS14_REGULATOR_MAX, |
| }; |
| |
| /* Regulator constraints for BUCKx */ |
| #define S2MPS14_BUCK1235_START_SEL 0x20 |
| #define S2MPS14_BUCK4_START_SEL 0x40 |
| /* |
| * Default ramp delay in uv/us. Datasheet says that ramp delay can be |
| * controlled however it does not specify which register is used for that. |
| * Let's assume that default value will be set. |
| */ |
| #define S2MPS14_BUCK_RAMP_DELAY 12500 |
| |
| #define S2MPS14_LDO_VSEL_MASK 0x3F |
| #define S2MPS14_BUCK_VSEL_MASK 0xFF |
| #define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT) |
| #define S2MPS14_ENABLE_SHIFT 6 |
| /* On/Off controlled by PWREN */ |
| #define S2MPS14_ENABLE_SUSPEND (0x01 << S2MPS14_ENABLE_SHIFT) |
| /* On/Off controlled by LDO10EN or EMMCEN */ |
| #define S2MPS14_ENABLE_EXT_CONTROL (0x00 << S2MPS14_ENABLE_SHIFT) |
| #define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1) |
| #define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1) |
| |
| #endif /* __LINUX_MFD_S2MPS14_H */ |
