diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 671b876..314a275 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
  *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 2002, 2003, 2004  Paul Mundt
+ *  Copyright (C) 2002, 2003, 2004, 2005  Paul Mundt
  *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
  *
  *  Some code taken from i386 version.
@@ -11,50 +11,21 @@
  */
 
 #include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp.h>
 #include <linux/profile.h>
-
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/machvec.h>
+#include <asm/clock.h>
 #include <asm/rtc.h>
-#include <asm/freq.h>
-#include <asm/cpu/timer.h>
-#ifdef CONFIG_SH_KGDB
+#include <asm/timer.h>
 #include <asm/kgdb.h>
-#endif
-
-#include <linux/timex.h>
-#include <linux/irq.h>
-
-#define TMU_TOCR_INIT	0x00
-#define TMU0_TCR_INIT	0x0020
-#define TMU_TSTR_INIT	1
-
-#define TMU0_TCR_CALIB	0x0000
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-#define CLOCKGEN_MEMCLKCR 0xbb040038
-#define MEMCLKCR_RATIO_MASK 0x7
-#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */
 
 extern unsigned long wall_jiffies;
-#define TICK_SIZE (tick_nsec / 1000)
-DEFINE_SPINLOCK(tmu0_lock);
+struct sys_timer *sys_timer;
+
+/* Move this somewhere more sensible.. */
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
 
 /* XXX: Can we initialize this in a routine somewhere?  Dreamcast doesn't want
  * these routines anywhere... */
@@ -66,98 +37,14 @@
 int (*rtc_set_time)(const time_t);
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
-#endif
-#if defined(CONFIG_CPU_SH3)
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int stc_values[]      = { 0, 1, 4, 2, 5, 0, 0, 0 };
-#define bfc_divisors stc_multipliers
-#define bfc_values stc_values
-static int ifc_divisors[]    = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int ifc_values[]      = { 0, 1, 4, 2, 0, 0, 0, 0 };
-static int pfc_divisors[]    = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int pfc_values[]      = { 0, 1, 4, 2, 5, 0, 0, 0 };
-#elif defined(CONFIG_CPU_SH4)
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
-static int ifc_values[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-#define bfc_divisors ifc_divisors	/* Same */
-#define bfc_values ifc_values
-#define pfc_divisors ifc_divisors	/* Same */
-#define pfc_values ifc_values
-#else
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
-static int ifc_values[]   = { 0, 1, 2, 3, 0, 4, 0, 5 };
-#define bfc_divisors ifc_divisors	/* Same */
-#define bfc_values ifc_values
-static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
-static int pfc_values[]   = { 0, 0, 1, 2, 0, 3, 0, 4 };
-#endif
-#else
-#error "Unknown ifc/bfc/pfc/stc values for this processor"
-#endif
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
-unsigned long long sched_clock(void)
+unsigned long long __attribute__ ((weak)) sched_clock(void)
 {
 	return (unsigned long long)jiffies * (1000000000 / HZ);
 }
 
-static unsigned long do_gettimeoffset(void)
-{
-	int count;
-	unsigned long flags;
-
-	static int count_p = 0x7fffffff;    /* for the first call after boot */
-	static unsigned long jiffies_p = 0;
-
-	/*
-	 * cache volatile jiffies temporarily; we have IRQs turned off.
-	 */
-	unsigned long jiffies_t;
-
-	spin_lock_irqsave(&tmu0_lock, flags);
-	/* timer count may underflow right here */
-	count = ctrl_inl(TMU0_TCNT);	/* read the latched count */
-
-	jiffies_t = jiffies;
-
-	/*
-	 * avoiding timer inconsistencies (they are rare, but they happen)...
-	 * there is one kind of problem that must be avoided here:
-	 *  1. the timer counter underflows
-	 */
-
-	if( jiffies_t == jiffies_p ) {
-		if( count > count_p ) {
-			/* the nutcase */
-
-			if(ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */
-				/*
-				 * We cannot detect lost timer interrupts ...
-				 * well, that's why we call them lost, don't we? :)
-				 * [hmm, on the Pentium and Alpha we can ... sort of]
-				 */
-				count -= LATCH;
-			} else {
-				printk("do_slow_gettimeoffset(): hardware timer problem?\n");
-			}
-		}
-	} else
-		jiffies_p = jiffies_t;
-
-	count_p = count;
-	spin_unlock_irqrestore(&tmu0_lock, flags);
-
-	count = ((LATCH-1) - count) * TICK_SIZE;
-	count = (count + LATCH/2) / LATCH;
-
-	return count;
-}
-
 void do_gettimeofday(struct timeval *tv)
 {
 	unsigned long seq;
@@ -166,7 +53,7 @@
 
 	do {
 		seq = read_seqbegin(&xtime_lock);
-		usec = do_gettimeoffset();
+		usec = get_timer_offset();
 
 		lost = jiffies - wall_jiffies;
 		if (lost)
@@ -202,7 +89,7 @@
 	 * wall time.  Discover what correction gettimeofday() would have
 	 * made, and then undo it!
 	 */
-	nsec -= 1000 * (do_gettimeoffset() +
+	nsec -= 1000 * (get_timer_offset() +
 				(jiffies - wall_jiffies) * (1000000 / HZ));
 
 	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
@@ -224,10 +111,10 @@
 static long last_rtc_update;
 
 /*
- * timer_interrupt() needs to keep up the real-time clock,
+ * handle_timer_tick() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
+void handle_timer_tick(struct pt_regs *regs)
 {
 	do_timer(regs);
 #ifndef CONFIG_SMP
@@ -252,337 +139,35 @@
 		if (rtc_set_time(xtime.tv_sec) == 0)
 			last_rtc_update = xtime.tv_sec;
 		else
-			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+			/* do it again in 60s */
+			last_rtc_update = xtime.tv_sec - 600;
 	}
 }
 
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static struct sysdev_class timer_sysclass = {
+	set_kset_name("timer"),
+};
+
+static int __init timer_init_sysfs(void)
 {
-	unsigned long timer_status;
+	int ret = sysdev_class_register(&timer_sysclass);
+	if (ret != 0)
+		return ret;
 
-	/* Clear UNF bit */
-	timer_status = ctrl_inw(TMU0_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU0_TCR);
-
-	/*
-	 * Here we are in the timer irq handler. We just have irqs locally
-	 * disabled but we don't know if the timer_bh is running on the other
-	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
-	 * the irq version of write_lock because as just said we have irq
-	 * locally disabled. -arca
-	 */
-	write_seqlock(&xtime_lock);
-	do_timer_interrupt(irq, regs);
-	write_sequnlock(&xtime_lock);
-
-	return IRQ_HANDLED;
+	sys_timer->dev.cls = &timer_sysclass;
+	return sysdev_register(&sys_timer->dev);
 }
 
-/*
- * Hah!  We'll see if this works (switching from usecs to nsecs).
- */
-static unsigned int __init get_timer_frequency(void)
-{
-	u32 freq;
-	struct timespec ts1, ts2;
-	unsigned long diff_nsec;
-	unsigned long factor;
-
-	/* Setup the timer:  We don't want to generate interrupts, just
-	 * have it count down at its natural rate.
-	 */
-	ctrl_outb(0, TMU_TSTR);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
-	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
-	ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR);
-	ctrl_outl(0xffffffff, TMU0_TCOR);
-	ctrl_outl(0xffffffff, TMU0_TCNT);
-
-	rtc_get_time(&ts2);
-
-	do {
-		rtc_get_time(&ts1);
-	} while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
-	/* actually start the timer */
-	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-
-	do {
-		rtc_get_time(&ts2);
-	} while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
-	freq = 0xffffffff - ctrl_inl(TMU0_TCNT);
-	if (ts2.tv_nsec < ts1.tv_nsec) {
-		ts2.tv_nsec += 1000000000;
-		ts2.tv_sec--;
-	}
-
-	diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec);
-
-	/* this should work well if the RTC has a precision of n Hz, where
-	 * n is an integer.  I don't think we have to worry about the other
-	 * cases. */
-	factor = (1000000000 + diff_nsec/2) / diff_nsec;
-
-	if (factor * diff_nsec > 1100000000 ||
-	    factor * diff_nsec <  900000000)
-		panic("weird RTC (diff_nsec %ld)", diff_nsec);
-
-	return freq * factor;
-}
+device_initcall(timer_init_sysfs);
 
 void (*board_time_init)(void);
-void (*board_timer_setup)(struct irqaction *irq);
-
-static unsigned int sh_pclk_freq __initdata = CONFIG_SH_PCLK_FREQ;
-
-static int __init sh_pclk_setup(char *str)
-{
-        unsigned int freq;
-
-	if (get_option(&str, &freq))
-		sh_pclk_freq = freq;
-
-	return 1;
-}
-__setup("sh_pclk=", sh_pclk_setup);
-
-static struct irqaction irq0  = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
-
-void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsigned int *pfc)
-{
-	unsigned int frqcr = ctrl_inw(FRQCR);
-
-#if defined(CONFIG_CPU_SH3)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-	*ifc = md_table[((frqcr & 0x0070) >> 4)];
-	*bfc = md_table[((frqcr & 0x0700) >> 8)];
-	*pfc = md_table[frqcr & 0x0007];
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-	*bfc = stc_multipliers[(frqcr & 0x0300) >> 8];
-	*ifc = ifc_divisors[(frqcr & 0x0030) >> 4];
-	*pfc = pfc_divisors[frqcr & 0x0003];
-#else
-	unsigned int tmp;
-
-	tmp  = (frqcr & 0x8000) >> 13;
-	tmp |= (frqcr & 0x0030) >>  4;
-	*bfc = stc_multipliers[tmp];
-	tmp  = (frqcr & 0x4000)  >> 12;
-	tmp |= (frqcr & 0x000c) >> 2;
-	*ifc = ifc_divisors[tmp];
-	tmp  = (frqcr & 0x2000) >> 11;
-	tmp |= frqcr & 0x0003;
-	*pfc = pfc_divisors[tmp];
-#endif
-#elif defined(CONFIG_CPU_SH4)
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
-	*ifc = ifc_divisors[(frqcr>> 20) & 0x0007];
-	*bfc = bfc_divisors[(frqcr>> 12) & 0x0007];
-	*pfc = pfc_divisors[frqcr & 0x0007];
-#else
-	*ifc = ifc_divisors[(frqcr >> 6) & 0x0007];
-	*bfc = bfc_divisors[(frqcr >> 3) & 0x0007];
-	*pfc = pfc_divisors[frqcr & 0x0007];
-#endif
-#endif
-}
-
-/*
- * This bit of ugliness builds up accessor routines to get at both
- * the divisors and the physical values.
- */
-#define _FREQ_TABLE(x) \
-	unsigned int get_##x##_divisor(unsigned int value)	\
-		{ return x##_divisors[value]; }			\
-								\
-	unsigned int get_##x##_value(unsigned int divisor)	\
-		{ return x##_values[(divisor - 1)]; }
-
-_FREQ_TABLE(ifc);
-_FREQ_TABLE(bfc);
-_FREQ_TABLE(pfc);
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-
-/*
- * The ST40 divisors are totally different so we set the cpu data
- * clocks using a different algorithm
- *
- * I've just plugged this from the 2.4 code
- *	- Alex Bennee <kernel-hacker@bennee.com>
- */
-#define CCN_PVR_CHIP_SHIFT 24
-#define CCN_PVR_CHIP_MASK  0xff
-#define CCN_PVR_CHIP_ST40STB1 0x4
-
-
-struct frqcr_data {
-	unsigned short frqcr;
-
-	struct {
-		unsigned char multiplier;
-		unsigned char divisor;
-	} factor[3];
-};
-
-static struct frqcr_data st40_frqcr_table[] = {
-	{ 0x000, {{1,1}, {1,1}, {1,2}}},
-	{ 0x002, {{1,1}, {1,1}, {1,4}}},
-	{ 0x004, {{1,1}, {1,1}, {1,8}}},
-	{ 0x008, {{1,1}, {1,2}, {1,2}}},
-	{ 0x00A, {{1,1}, {1,2}, {1,4}}},
-	{ 0x00C, {{1,1}, {1,2}, {1,8}}},
-	{ 0x011, {{1,1}, {2,3}, {1,6}}},
-	{ 0x013, {{1,1}, {2,3}, {1,3}}},
-	{ 0x01A, {{1,1}, {1,2}, {1,4}}},
-	{ 0x01C, {{1,1}, {1,2}, {1,8}}},
-	{ 0x023, {{1,1}, {2,3}, {1,3}}},
-	{ 0x02C, {{1,1}, {1,2}, {1,8}}},
-	{ 0x048, {{1,2}, {1,2}, {1,4}}},
-	{ 0x04A, {{1,2}, {1,2}, {1,6}}},
-	{ 0x04C, {{1,2}, {1,2}, {1,8}}},
-	{ 0x05A, {{1,2}, {1,3}, {1,6}}},
-	{ 0x05C, {{1,2}, {1,3}, {1,6}}},
-	{ 0x063, {{1,2}, {1,4}, {1,4}}},
-	{ 0x06C, {{1,2}, {1,4}, {1,8}}},
-	{ 0x091, {{1,3}, {1,3}, {1,6}}},
-	{ 0x093, {{1,3}, {1,3}, {1,6}}},
-	{ 0x0A3, {{1,3}, {1,6}, {1,6}}},
-	{ 0x0DA, {{1,4}, {1,4}, {1,8}}},
-	{ 0x0DC, {{1,4}, {1,4}, {1,8}}},
-	{ 0x0EC, {{1,4}, {1,8}, {1,8}}},
-	{ 0x123, {{1,4}, {1,4}, {1,8}}},
-	{ 0x16C, {{1,4}, {1,8}, {1,8}}},
-};
-
-struct memclk_data {
-	unsigned char multiplier;
-	unsigned char divisor;
-};
-
-static struct memclk_data st40_memclk_table[8] = {
-	{1,1},	// 000
-	{1,2},	// 001
-	{1,3},	// 010
-	{2,3},	// 011
-	{1,4},	// 100
-	{1,6},	// 101
-	{1,8},	// 110
-	{1,8}	// 111
-};
-
-static void st40_specific_time_init(unsigned int module_clock, unsigned short frqcr)
-{
-	unsigned int cpu_clock, master_clock, bus_clock, memory_clock;
-	struct frqcr_data *d;
-	int a;
-	unsigned long memclkcr;
-	struct memclk_data *e;
-
-	for (a = 0; a < ARRAY_SIZE(st40_frqcr_table); a++) {
-		d = &st40_frqcr_table[a];
-
-		if (d->frqcr == (frqcr & 0x1ff))
-			break;
-	}
-
-	if (a == ARRAY_SIZE(st40_frqcr_table)) {
-		d = st40_frqcr_table;
-
-		printk("ERROR: Unrecognised FRQCR value (0x%x), "
-		       "using default multipliers\n", frqcr);
-	}
-
-	memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR);
-	e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK];
-
-	printk(KERN_INFO "Clock multipliers: CPU: %d/%d Bus: %d/%d "
-	       "Mem: %d/%d Periph: %d/%d\n",
-	       d->factor[0].multiplier, d->factor[0].divisor,
-	       d->factor[1].multiplier, d->factor[1].divisor,
-	       e->multiplier,           e->divisor,
-	       d->factor[2].multiplier, d->factor[2].divisor);
-
-	master_clock = module_clock * d->factor[2].divisor
-				    / d->factor[2].multiplier;
-	bus_clock    = master_clock * d->factor[1].multiplier
-				    / d->factor[1].divisor;
-	memory_clock = master_clock * e->multiplier
-				    / e->divisor;
-	cpu_clock    = master_clock * d->factor[0].multiplier
-				    / d->factor[0].divisor;
-
-	current_cpu_data.cpu_clock    = cpu_clock;
-	current_cpu_data.master_clock = master_clock;
-	current_cpu_data.bus_clock    = bus_clock;
-	current_cpu_data.memory_clock = memory_clock;
-	current_cpu_data.module_clock = module_clock;
-}
-#endif
 
 void __init time_init(void)
 {
-	unsigned int timer_freq = 0;
-	unsigned int ifc, pfc, bfc;
-	unsigned long interval;
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-	unsigned long pvr;
-	unsigned short frqcr;
-#endif
-
 	if (board_time_init)
 		board_time_init();
 
-	/*
-	 * If we don't have an RTC (such as with the SH7300), don't attempt to
-	 * probe the timer frequency. Rely on an either hardcoded peripheral
-	 * clock value, or on the sh_pclk command line option. Note that we
-	 * still need to have CONFIG_SH_PCLK_FREQ set in order for things like
-	 * CLOCK_TICK_RATE to be sane.
-	 */
-	current_cpu_data.module_clock = sh_pclk_freq;
-
-#ifdef CONFIG_SH_PCLK_CALC
-	/* XXX: Switch this over to a more generic test. */
-	{
-		unsigned int freq;
-
-		/*
-		 * If we've specified a peripheral clock frequency, and we have
-		 * an RTC, compare it against the autodetected value. Complain
-		 * if there's a mismatch.
-		 */
-		timer_freq = get_timer_frequency();
-		freq = timer_freq * 4;
-
-		if (sh_pclk_freq && (sh_pclk_freq/100*99 > freq || sh_pclk_freq/100*101 < freq)) {
-			printk(KERN_NOTICE "Calculated peripheral clock value "
-			       "%d differs from sh_pclk value %d, fixing..\n",
-			       freq, sh_pclk_freq);
-			current_cpu_data.module_clock = freq;
-		}
-	}
-#endif
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-	/* XXX: Update ST40 code to use board_time_init() */
-	pvr = ctrl_inl(CCN_PVR);
-	frqcr = ctrl_inw(FRQCR);
-	printk("time.c ST40 Probe: PVR %08lx, FRQCR %04hx\n", pvr, frqcr);
-
-	if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1)
-		st40_specific_time_init(current_cpu_data.module_clock, frqcr);
-	else
-#endif
-		get_current_frequency_divisors(&ifc, &bfc, &pfc);
+	clk_init();
 
 	if (rtc_get_time) {
 		rtc_get_time(&xtime);
@@ -594,51 +179,12 @@
         set_normalized_timespec(&wall_to_monotonic,
                                 -xtime.tv_sec, -xtime.tv_nsec);
 
-	if (board_timer_setup) {
-		board_timer_setup(&irq0);
-	} else {
-		setup_irq(TIMER_IRQ, &irq0);
-	}
-
 	/*
-	 * for ST40 chips the current_cpu_data should already be set
-	 * so not having valid pfc/bfc/ifc shouldn't be a problem
+	 * Find the timer to use as the system timer, it will be
+	 * initialized for us.
 	 */
-	if (!current_cpu_data.master_clock)
-		current_cpu_data.master_clock = current_cpu_data.module_clock * pfc;
-	if (!current_cpu_data.bus_clock)
-		current_cpu_data.bus_clock = current_cpu_data.master_clock / bfc;
-	if (!current_cpu_data.cpu_clock)
-		current_cpu_data.cpu_clock = current_cpu_data.master_clock / ifc;
-
-	printk("CPU clock: %d.%02dMHz\n",
-	       (current_cpu_data.cpu_clock / 1000000),
-	       (current_cpu_data.cpu_clock % 1000000)/10000);
-	printk("Bus clock: %d.%02dMHz\n",
-	       (current_cpu_data.bus_clock / 1000000),
-	       (current_cpu_data.bus_clock % 1000000)/10000);
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-	printk("Memory clock: %d.%02dMHz\n",
-	       (current_cpu_data.memory_clock / 1000000),
-	       (current_cpu_data.memory_clock % 1000000)/10000);
-#endif
-	printk("Module clock: %d.%02dMHz\n",
-	       (current_cpu_data.module_clock / 1000000),
-	       (current_cpu_data.module_clock % 1000000)/10000);
-
-	interval = (current_cpu_data.module_clock/4 + HZ/2) / HZ;
-
-	printk("Interval = %ld\n", interval);
-
-	/* Start TMU0 */
-	ctrl_outb(0, TMU_TSTR);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
-	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
-	ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
-	ctrl_outl(interval, TMU0_TCOR);
-	ctrl_outl(interval, TMU0_TCNT);
-	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+	sys_timer = get_sys_timer();
+	printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
 
 #if defined(CONFIG_SH_KGDB)
 	/*