| /* |
| * FB driver for the HX8347D LCD Controller |
| * |
| * Copyright (C) 2013 Christian Vogelgsang |
| * |
| * Based on driver code found here: https://github.com/watterott/r61505u-Adapter |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| |
| #include "fbtft.h" |
| |
| #define DRVNAME "fb_hx8347d" |
| #define WIDTH 320 |
| #define HEIGHT 240 |
| #define DEFAULT_GAMMA "0 0 0 0 0 0 0 0 0 0 0 0 0 0\n" \ |
| "0 0 0 0 0 0 0 0 0 0 0 0 0 0" |
| |
| static int init_display(struct fbtft_par *par) |
| { |
| par->fbtftops.reset(par); |
| |
| /* driving ability */ |
| write_reg(par, 0xEA, 0x00); |
| write_reg(par, 0xEB, 0x20); |
| write_reg(par, 0xEC, 0x0C); |
| write_reg(par, 0xED, 0xC4); |
| write_reg(par, 0xE8, 0x40); |
| write_reg(par, 0xE9, 0x38); |
| write_reg(par, 0xF1, 0x01); |
| write_reg(par, 0xF2, 0x10); |
| write_reg(par, 0x27, 0xA3); |
| |
| /* power voltage */ |
| write_reg(par, 0x1B, 0x1B); |
| write_reg(par, 0x1A, 0x01); |
| write_reg(par, 0x24, 0x2F); |
| write_reg(par, 0x25, 0x57); |
| |
| /* VCOM offset */ |
| write_reg(par, 0x23, 0x8D); /* for flicker adjust */ |
| |
| /* power on */ |
| write_reg(par, 0x18, 0x36); |
| write_reg(par, 0x19, 0x01); /* start osc */ |
| write_reg(par, 0x01, 0x00); /* wakeup */ |
| write_reg(par, 0x1F, 0x88); |
| mdelay(5); |
| write_reg(par, 0x1F, 0x80); |
| mdelay(5); |
| write_reg(par, 0x1F, 0x90); |
| mdelay(5); |
| write_reg(par, 0x1F, 0xD0); |
| mdelay(5); |
| |
| /* color selection */ |
| write_reg(par, 0x17, 0x05); /* 65k */ |
| |
| /*panel characteristic */ |
| write_reg(par, 0x36, 0x00); |
| |
| /*display on */ |
| write_reg(par, 0x28, 0x38); |
| mdelay(40); |
| write_reg(par, 0x28, 0x3C); |
| |
| /* orientation */ |
| write_reg(par, 0x16, 0x60 | (par->bgr << 3)); |
| |
| return 0; |
| } |
| |
| static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) |
| { |
| write_reg(par, 0x02, (xs >> 8) & 0xFF); |
| write_reg(par, 0x03, xs & 0xFF); |
| write_reg(par, 0x04, (xe >> 8) & 0xFF); |
| write_reg(par, 0x05, xe & 0xFF); |
| write_reg(par, 0x06, (ys >> 8) & 0xFF); |
| write_reg(par, 0x07, ys & 0xFF); |
| write_reg(par, 0x08, (ye >> 8) & 0xFF); |
| write_reg(par, 0x09, ye & 0xFF); |
| write_reg(par, 0x22); |
| } |
| |
| /* |
| * Gamma string format: |
| * VRP0 VRP1 VRP2 VRP3 VRP4 VRP5 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 CGM |
| * VRN0 VRN1 VRN2 VRN3 VRN4 VRN5 PRN0 PRN1 PKN0 PKN1 PKN2 PKN3 PKN4 CGM |
| */ |
| #define CURVE(num, idx) curves[num * par->gamma.num_values + idx] |
| static int set_gamma(struct fbtft_par *par, u32 *curves) |
| { |
| unsigned long mask[] = { |
| 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x7f, 0x7f, 0x1f, 0x1f, |
| 0x1f, 0x1f, 0x1f, 0x0f, |
| }; |
| int i, j; |
| int acc = 0; |
| |
| /* apply mask */ |
| for (i = 0; i < par->gamma.num_curves; i++) |
| for (j = 0; j < par->gamma.num_values; j++) { |
| acc += CURVE(i, j); |
| CURVE(i, j) &= mask[j]; |
| } |
| |
| if (acc == 0) /* skip if all values are zero */ |
| return 0; |
| |
| for (i = 0; i < par->gamma.num_curves; i++) { |
| write_reg(par, 0x40 + (i * 0x10), CURVE(i, 0)); |
| write_reg(par, 0x41 + (i * 0x10), CURVE(i, 1)); |
| write_reg(par, 0x42 + (i * 0x10), CURVE(i, 2)); |
| write_reg(par, 0x43 + (i * 0x10), CURVE(i, 3)); |
| write_reg(par, 0x44 + (i * 0x10), CURVE(i, 4)); |
| write_reg(par, 0x45 + (i * 0x10), CURVE(i, 5)); |
| write_reg(par, 0x46 + (i * 0x10), CURVE(i, 6)); |
| write_reg(par, 0x47 + (i * 0x10), CURVE(i, 7)); |
| write_reg(par, 0x48 + (i * 0x10), CURVE(i, 8)); |
| write_reg(par, 0x49 + (i * 0x10), CURVE(i, 9)); |
| write_reg(par, 0x4A + (i * 0x10), CURVE(i, 10)); |
| write_reg(par, 0x4B + (i * 0x10), CURVE(i, 11)); |
| write_reg(par, 0x4C + (i * 0x10), CURVE(i, 12)); |
| } |
| write_reg(par, 0x5D, (CURVE(1, 0) << 4) | CURVE(0, 0)); |
| |
| return 0; |
| } |
| |
| #undef CURVE |
| |
| static struct fbtft_display display = { |
| .regwidth = 8, |
| .width = WIDTH, |
| .height = HEIGHT, |
| .gamma_num = 2, |
| .gamma_len = 14, |
| .gamma = DEFAULT_GAMMA, |
| .fbtftops = { |
| .init_display = init_display, |
| .set_addr_win = set_addr_win, |
| .set_gamma = set_gamma, |
| }, |
| }; |
| |
| FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8347d", &display); |
| |
| MODULE_ALIAS("spi:" DRVNAME); |
| MODULE_ALIAS("platform:" DRVNAME); |
| MODULE_ALIAS("spi:hx8347d"); |
| MODULE_ALIAS("platform:hx8347d"); |
| |
| MODULE_DESCRIPTION("FB driver for the HX8347D LCD Controller"); |
| MODULE_AUTHOR("Christian Vogelgsang"); |
| MODULE_LICENSE("GPL"); |