| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #define GPDIR 0 |
| #define GPCFG 4 /* open drain or not */ |
| #define GPDAT 8 |
| |
| /* |
| * gpio port and pin definitions |
| * NOTE: port number starts from 0 |
| */ |
| #define XL_INITN_PORT 1 |
| #define XL_INITN_PIN 14 |
| #define XL_RDWRN_PORT 1 |
| #define XL_RDWRN_PIN 13 |
| #define XL_CCLK_PORT 1 |
| #define XL_CCLK_PIN 10 |
| #define XL_PROGN_PORT 1 |
| #define XL_PROGN_PIN 25 |
| #define XL_CSIN_PORT 1 |
| #define XL_CSIN_PIN 26 |
| #define XL_DONE_PORT 1 |
| #define XL_DONE_PIN 27 |
| |
| /* |
| * gpio mapping |
| * |
| XL_config_D0 – gpio1_31 |
| Xl_config_d1 – gpio1_30 |
| Xl_config_d2 – gpio1_29 |
| Xl_config_d3 – gpio1_28 |
| Xl_config_d4 – gpio1_27 |
| Xl_config_d5 – gpio1_26 |
| Xl_config_d6 – gpio1_25 |
| Xl_config_d7 – gpio1_24 |
| Xl_config_d8 – gpio1_23 |
| Xl_config_d9 – gpio1_22 |
| Xl_config_d10 – gpio1_21 |
| Xl_config_d11 – gpio1_20 |
| Xl_config_d12 – gpio1_19 |
| Xl_config_d13 – gpio1_18 |
| Xl_config_d14 – gpio1_16 |
| Xl_config_d15 – gpio1_14 |
| * |
| */ |
| |
| /* |
| * program bus width in bytes |
| */ |
| enum wbus { |
| bus_1byte = 1, |
| bus_2byte = 2, |
| }; |
| |
| #define MAX_WAIT_DONE 10000 |
| |
| struct gpiobus { |
| int ngpio; |
| void __iomem *r[4]; |
| }; |
| |
| int xl_supported_prog_bus_width(enum wbus bus_bytes); |
| |
| void xl_program_b(int32_t i); |
| void xl_rdwr_b(int32_t i); |
| void xl_csi_b(int32_t i); |
| |
| int xl_get_init_b(void); |
| int xl_get_done_b(void); |
| |
| void xl_shift_cclk(int count); |
| void xl_shift_bytes_out(enum wbus bus_byte, unsigned char *pdata); |
| |
| int xl_init_io(void); |