| /** | |
| * Freescale MPC8610HPCD ALSA SoC Machine driver | |
| * | |
| * Author: Timur Tabi <timur@freescale.com> | |
| * | |
| * Copyright 2007-2010 Freescale Semiconductor, Inc. | |
| * | |
| * This file is licensed under the terms of the GNU General Public License | |
| * version 2. This program is licensed "as is" without any warranty of any | |
| * kind, whether express or implied. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/fsl/guts.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_device.h> | |
| #include <linux/slab.h> | |
| #include <sound/soc.h> | |
| #include "fsl_dma.h" | |
| #include "fsl_ssi.h" | |
| #include "fsl_utils.h" | |
| /* There's only one global utilities register */ | |
| static phys_addr_t guts_phys; | |
| /** | |
| * mpc8610_hpcd_data: machine-specific ASoC device data | |
| * | |
| * This structure contains data for a single sound platform device on an | |
| * MPC8610 HPCD. Some of the data is taken from the device tree. | |
| */ | |
| struct mpc8610_hpcd_data { | |
| struct snd_soc_dai_link dai[2]; | |
| struct snd_soc_card card; | |
| unsigned int dai_format; | |
| unsigned int codec_clk_direction; | |
| unsigned int cpu_clk_direction; | |
| unsigned int clk_frequency; | |
| unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */ | |
| unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ | |
| unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ | |
| char codec_dai_name[DAI_NAME_SIZE]; | |
| char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ | |
| }; | |
| /** | |
| * mpc8610_hpcd_machine_probe: initialize the board | |
| * | |
| * This function is used to initialize the board-specific hardware. | |
| * | |
| * Here we program the DMACR and PMUXCR registers. | |
| */ | |
| static int mpc8610_hpcd_machine_probe(struct snd_soc_card *card) | |
| { | |
| struct mpc8610_hpcd_data *machine_data = | |
| container_of(card, struct mpc8610_hpcd_data, card); | |
| struct ccsr_guts __iomem *guts; | |
| guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); | |
| if (!guts) { | |
| dev_err(card->dev, "could not map global utilities\n"); | |
| return -ENOMEM; | |
| } | |
| /* Program the signal routing between the SSI and the DMA */ | |
| guts_set_dmacr(guts, machine_data->dma_id[0], | |
| machine_data->dma_channel_id[0], | |
| CCSR_GUTS_DMACR_DEV_SSI); | |
| guts_set_dmacr(guts, machine_data->dma_id[1], | |
| machine_data->dma_channel_id[1], | |
| CCSR_GUTS_DMACR_DEV_SSI); | |
| guts_set_pmuxcr_dma(guts, machine_data->dma_id[0], | |
| machine_data->dma_channel_id[0], 0); | |
| guts_set_pmuxcr_dma(guts, machine_data->dma_id[1], | |
| machine_data->dma_channel_id[1], 0); | |
| switch (machine_data->ssi_id) { | |
| case 0: | |
| clrsetbits_be32(&guts->pmuxcr, | |
| CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_SSI); | |
| break; | |
| case 1: | |
| clrsetbits_be32(&guts->pmuxcr, | |
| CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_SSI); | |
| break; | |
| } | |
| iounmap(guts); | |
| return 0; | |
| } | |
| /** | |
| * mpc8610_hpcd_startup: program the board with various hardware parameters | |
| * | |
| * This function takes board-specific information, like clock frequencies | |
| * and serial data formats, and passes that information to the codec and | |
| * transport drivers. | |
| */ | |
| static int mpc8610_hpcd_startup(struct snd_pcm_substream *substream) | |
| { | |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
| struct mpc8610_hpcd_data *machine_data = | |
| container_of(rtd->card, struct mpc8610_hpcd_data, card); | |
| struct device *dev = rtd->card->dev; | |
| int ret = 0; | |
| /* Tell the codec driver what the serial protocol is. */ | |
| ret = snd_soc_dai_set_fmt(rtd->codec_dai, machine_data->dai_format); | |
| if (ret < 0) { | |
| dev_err(dev, "could not set codec driver audio format\n"); | |
| return ret; | |
| } | |
| /* | |
| * Tell the codec driver what the MCLK frequency is, and whether it's | |
| * a slave or master. | |
| */ | |
| ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0, | |
| machine_data->clk_frequency, | |
| machine_data->codec_clk_direction); | |
| if (ret < 0) { | |
| dev_err(dev, "could not set codec driver clock params\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * mpc8610_hpcd_machine_remove: Remove the sound device | |
| * | |
| * This function is called to remove the sound device for one SSI. We | |
| * de-program the DMACR and PMUXCR register. | |
| */ | |
| static int mpc8610_hpcd_machine_remove(struct snd_soc_card *card) | |
| { | |
| struct mpc8610_hpcd_data *machine_data = | |
| container_of(card, struct mpc8610_hpcd_data, card); | |
| struct ccsr_guts __iomem *guts; | |
| guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); | |
| if (!guts) { | |
| dev_err(card->dev, "could not map global utilities\n"); | |
| return -ENOMEM; | |
| } | |
| /* Restore the signal routing */ | |
| guts_set_dmacr(guts, machine_data->dma_id[0], | |
| machine_data->dma_channel_id[0], 0); | |
| guts_set_dmacr(guts, machine_data->dma_id[1], | |
| machine_data->dma_channel_id[1], 0); | |
| switch (machine_data->ssi_id) { | |
| case 0: | |
| clrsetbits_be32(&guts->pmuxcr, | |
| CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_LA); | |
| break; | |
| case 1: | |
| clrsetbits_be32(&guts->pmuxcr, | |
| CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_LA); | |
| break; | |
| } | |
| iounmap(guts); | |
| return 0; | |
| } | |
| /** | |
| * mpc8610_hpcd_ops: ASoC machine driver operations | |
| */ | |
| static const struct snd_soc_ops mpc8610_hpcd_ops = { | |
| .startup = mpc8610_hpcd_startup, | |
| }; | |
| /** | |
| * mpc8610_hpcd_probe: platform probe function for the machine driver | |
| * | |
| * Although this is a machine driver, the SSI node is the "master" node with | |
| * respect to audio hardware connections. Therefore, we create a new ASoC | |
| * device for each new SSI node that has a codec attached. | |
| */ | |
| static int mpc8610_hpcd_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = pdev->dev.parent; | |
| /* ssi_pdev is the platform device for the SSI node that probed us */ | |
| struct platform_device *ssi_pdev = to_platform_device(dev); | |
| struct device_node *np = ssi_pdev->dev.of_node; | |
| struct device_node *codec_np = NULL; | |
| struct mpc8610_hpcd_data *machine_data; | |
| int ret = -ENODEV; | |
| const char *sprop; | |
| const u32 *iprop; | |
| /* Find the codec node for this SSI. */ | |
| codec_np = of_parse_phandle(np, "codec-handle", 0); | |
| if (!codec_np) { | |
| dev_err(dev, "invalid codec node\n"); | |
| return -EINVAL; | |
| } | |
| machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL); | |
| if (!machine_data) { | |
| ret = -ENOMEM; | |
| goto error_alloc; | |
| } | |
| machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); | |
| machine_data->dai[0].ops = &mpc8610_hpcd_ops; | |
| /* ASoC core can match codec with device node */ | |
| machine_data->dai[0].codec_of_node = codec_np; | |
| /* The DAI name from the codec (snd_soc_dai_driver.name) */ | |
| machine_data->dai[0].codec_dai_name = "cs4270-hifi"; | |
| /* We register two DAIs per SSI, one for playback and the other for | |
| * capture. Currently, we only support codecs that have one DAI for | |
| * both playback and capture. | |
| */ | |
| memcpy(&machine_data->dai[1], &machine_data->dai[0], | |
| sizeof(struct snd_soc_dai_link)); | |
| /* Get the device ID */ | |
| iprop = of_get_property(np, "cell-index", NULL); | |
| if (!iprop) { | |
| dev_err(&pdev->dev, "cell-index property not found\n"); | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| machine_data->ssi_id = be32_to_cpup(iprop); | |
| /* Get the serial format and clock direction. */ | |
| sprop = of_get_property(np, "fsl,mode", NULL); | |
| if (!sprop) { | |
| dev_err(&pdev->dev, "fsl,mode property not found\n"); | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| if (strcasecmp(sprop, "i2s-slave") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; | |
| /* In i2s-slave mode, the codec has its own clock source, so we | |
| * need to get the frequency from the device tree and pass it to | |
| * the codec driver. | |
| */ | |
| iprop = of_get_property(codec_np, "clock-frequency", NULL); | |
| if (!iprop || !*iprop) { | |
| dev_err(&pdev->dev, "codec bus-frequency " | |
| "property is missing or invalid\n"); | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| machine_data->clk_frequency = be32_to_cpup(iprop); | |
| } else if (strcasecmp(sprop, "i2s-master") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; | |
| } else if (strcasecmp(sprop, "lj-slave") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; | |
| } else if (strcasecmp(sprop, "lj-master") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; | |
| } else if (strcasecmp(sprop, "rj-slave") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; | |
| } else if (strcasecmp(sprop, "rj-master") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; | |
| } else if (strcasecmp(sprop, "ac97-slave") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; | |
| } else if (strcasecmp(sprop, "ac97-master") == 0) { | |
| machine_data->dai_format = | |
| SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS; | |
| machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; | |
| machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; | |
| } else { | |
| dev_err(&pdev->dev, | |
| "unrecognized fsl,mode property '%s'\n", sprop); | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| if (!machine_data->clk_frequency) { | |
| dev_err(&pdev->dev, "unknown clock frequency\n"); | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| /* Find the playback DMA channel to use. */ | |
| machine_data->dai[0].platform_name = machine_data->platform_name[0]; | |
| ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", | |
| &machine_data->dai[0], | |
| &machine_data->dma_channel_id[0], | |
| &machine_data->dma_id[0]); | |
| if (ret) { | |
| dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); | |
| goto error; | |
| } | |
| /* Find the capture DMA channel to use. */ | |
| machine_data->dai[1].platform_name = machine_data->platform_name[1]; | |
| ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", | |
| &machine_data->dai[1], | |
| &machine_data->dma_channel_id[1], | |
| &machine_data->dma_id[1]); | |
| if (ret) { | |
| dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); | |
| goto error; | |
| } | |
| /* Initialize our DAI data structure. */ | |
| machine_data->dai[0].stream_name = "playback"; | |
| machine_data->dai[1].stream_name = "capture"; | |
| machine_data->dai[0].name = machine_data->dai[0].stream_name; | |
| machine_data->dai[1].name = machine_data->dai[1].stream_name; | |
| machine_data->card.probe = mpc8610_hpcd_machine_probe; | |
| machine_data->card.remove = mpc8610_hpcd_machine_remove; | |
| machine_data->card.name = pdev->name; /* The platform driver name */ | |
| machine_data->card.owner = THIS_MODULE; | |
| machine_data->card.dev = &pdev->dev; | |
| machine_data->card.num_links = 2; | |
| machine_data->card.dai_link = machine_data->dai; | |
| /* Register with ASoC */ | |
| ret = snd_soc_register_card(&machine_data->card); | |
| if (ret) { | |
| dev_err(&pdev->dev, "could not register card\n"); | |
| goto error; | |
| } | |
| of_node_put(codec_np); | |
| return 0; | |
| error: | |
| kfree(machine_data); | |
| error_alloc: | |
| of_node_put(codec_np); | |
| return ret; | |
| } | |
| /** | |
| * mpc8610_hpcd_remove: remove the platform device | |
| * | |
| * This function is called when the platform device is removed. | |
| */ | |
| static int mpc8610_hpcd_remove(struct platform_device *pdev) | |
| { | |
| struct snd_soc_card *card = platform_get_drvdata(pdev); | |
| struct mpc8610_hpcd_data *machine_data = | |
| container_of(card, struct mpc8610_hpcd_data, card); | |
| snd_soc_unregister_card(card); | |
| kfree(machine_data); | |
| return 0; | |
| } | |
| static struct platform_driver mpc8610_hpcd_driver = { | |
| .probe = mpc8610_hpcd_probe, | |
| .remove = mpc8610_hpcd_remove, | |
| .driver = { | |
| /* The name must match 'compatible' property in the device tree, | |
| * in lowercase letters. | |
| */ | |
| .name = "snd-soc-mpc8610hpcd", | |
| }, | |
| }; | |
| /** | |
| * mpc8610_hpcd_init: machine driver initialization. | |
| * | |
| * This function is called when this module is loaded. | |
| */ | |
| static int __init mpc8610_hpcd_init(void) | |
| { | |
| struct device_node *guts_np; | |
| struct resource res; | |
| pr_info("Freescale MPC8610 HPCD ALSA SoC machine driver\n"); | |
| /* Get the physical address of the global utilities registers */ | |
| guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts"); | |
| if (of_address_to_resource(guts_np, 0, &res)) { | |
| pr_err("mpc8610-hpcd: missing/invalid global utilities node\n"); | |
| return -EINVAL; | |
| } | |
| guts_phys = res.start; | |
| return platform_driver_register(&mpc8610_hpcd_driver); | |
| } | |
| /** | |
| * mpc8610_hpcd_exit: machine driver exit | |
| * | |
| * This function is called when this driver is unloaded. | |
| */ | |
| static void __exit mpc8610_hpcd_exit(void) | |
| { | |
| platform_driver_unregister(&mpc8610_hpcd_driver); | |
| } | |
| module_init(mpc8610_hpcd_init); | |
| module_exit(mpc8610_hpcd_exit); | |
| MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); | |
| MODULE_DESCRIPTION("Freescale MPC8610 HPCD ALSA SoC machine driver"); | |
| MODULE_LICENSE("GPL v2"); |