diff --git a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
new file mode 100644
index 0000000..ad72a37
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
@@ -0,0 +1,31 @@
+What:		/config/usb-gadget/gadget/functions/mass_storage.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		stall		- Set to permit function to halt bulk endpoints.
+				Disabled on some USB devices known not to work
+				correctly. You should set it to true.
+		num_buffers	- Number of pipeline buffers. Valid numbers
+				are 2..4. Available only if
+				CONFIG_USB_GADGET_DEBUG_FILES is set.
+
+What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		file		- The path to the backing file for the LUN.
+				Required if LUN is not marked as removable.
+		ro		- Flag specifying access to the LUN shall be
+				read-only. This is implied if CD-ROM emulation
+				is enabled as well as when it was impossible
+				to open "filename" in R/W mode.
+		removable	- Flag specifying that LUN shall be indicated as
+				being removable.
+		cdrom		- Flag specifying that LUN shall be reported as
+				being a CD-ROM.
+		nofua		- Flag specifying that FUA flag
+				in SCSI WRITE(10,12)
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 39c8de0..b20e829 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -79,7 +79,7 @@
 		correspond to externally available input one of the named
 		versions may be used. The number must always be specified and
 		unique to allow association with event codes. Units after
-		application of scale and offset are microvolts.
+		application of scale and offset are millivolts.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
 KernelVersion:	2.6.35
@@ -90,7 +90,7 @@
 		physically equivalent inputs when non differential readings are
 		separately available. In differential only parts, then all that
 		is required is a consistent labeling.  Units after application
-		of scale and offset are microvolts.
+		of scale and offset are millivolts.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
 KernelVersion:	3.2
@@ -537,6 +537,62 @@
 		value is in raw device units or in processed units (as _raw
 		and _input do on sysfs direct channel read attributes).
 
+What:		/sys/.../events/in_accel_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_x_thresh_either_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_either_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_either_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_rising_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_falling_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_either_hysteresis
+What:		/sys/.../events/in_tempY_thresh_rising_hysteresis
+What:		/sys/.../events/in_tempY_thresh_falling_hysteresis
+What:		/sys/.../events/in_tempY_thresh_either_hysteresis
+What:		/sys/.../events/in_illuminance0_thresh_falling_hysteresis
+what:		/sys/.../events/in_illuminance0_thresh_rising_hysteresis
+what:		/sys/.../events/in_illuminance0_thresh_either_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_falling_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_rising_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_either_hysteresis
+KernelVersion:	3.13
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the hysteresis of threshold that the device is comparing
+		against for the events enabled by
+		<type>Y[_name]_thresh[_(rising|falling)]_hysteresis.
+		If separate attributes exist for the two directions, but
+		direction is not specified for this attribute, then a single
+		hysteresis value applies to both directions.
+		For falling events the hysteresis is added to the _value attribute for
+		this event to get the upper threshold for when the event goes back to
+		normal, for rising events the hysteresis is subtracted from the _value
+		attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
+		and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
+		will get activated once in_voltage0_raw goes above 1200 and will become
+		deactived again once the value falls below 1150.
+
 What:		/sys/.../events/in_accel_x_raw_roc_rising_value
 What:		/sys/.../events/in_accel_x_raw_roc_falling_value
 What:		/sys/.../events/in_accel_y_raw_roc_rising_value
@@ -811,3 +867,14 @@
 		Writing '1' stores the current device configuration into
 		on-chip EEPROM. After power-up or chip reset the device will
 		automatically load the saved configuration.
+
+What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_clear_integration_time
+What:		/sys/.../iio:deviceX/in_illuminance_integration_time
+KernelVersion:	3.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to get/set the integration time in
+		seconds.
diff --git a/Documentation/ABI/testing/sysfs-class-mic.txt b/Documentation/ABI/testing/sysfs-class-mic.txt
new file mode 100644
index 0000000..13f48af
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-mic.txt
@@ -0,0 +1,157 @@
+What:		/sys/class/mic/
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The mic class directory belongs to Intel MIC devices and
+		provides information per MIC device. An Intel MIC device is a
+		PCIe form factor add-in Coprocessor card based on the Intel Many
+		Integrated Core (MIC) architecture that runs a Linux OS.
+
+What:		/sys/class/mic/mic(x)
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The directories /sys/class/mic/mic0, /sys/class/mic/mic1 etc.,
+		represent MIC devices (0,1,..etc). Each directory has
+		information specific to that MIC device.
+
+What:		/sys/class/mic/mic(x)/family
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the Coprocessor family for an Intel
+		MIC device. For example - "x100"
+
+What:		/sys/class/mic/mic(x)/stepping
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the silicon stepping for an Intel
+		MIC device. For example - "A0" or "B0"
+
+What:		/sys/class/mic/mic(x)/state
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this entry provides the current state of an Intel
+		MIC device in the context of the card OS. Possible values that
+		will be read are:
+		"offline" - The MIC device is ready to boot the card OS. On
+		reading this entry after an OSPM resume, a "boot" has to be
+		written to this entry if the card was previously shutdown
+		during OSPM suspend.
+		"online" - The MIC device has initiated booting a card OS.
+		"shutting_down" - The card OS is shutting down.
+		"reset_failed" - The MIC device has failed to reset.
+		"suspending" - The MIC device is currently being prepared for
+		suspend. On reading this entry, a "suspend" has to be written
+		to the state sysfs entry to ensure the card is shutdown during
+		OSPM suspend.
+		"suspended" - The MIC device has been suspended.
+
+		When written, this sysfs entry triggers different state change
+		operations depending upon the current state of the card OS.
+		Acceptable values are:
+		"boot" - Boot the card OS image specified by the combination
+			 of firmware, ramdisk, cmdline and bootmode
+			sysfs entries.
+		"reset" - Initiates device reset.
+		"shutdown" - Initiates card OS shutdown.
+		"suspend" - Initiates card OS shutdown and also marks the card
+		as suspended.
+
+What:		/sys/class/mic/mic(x)/shutdown_status
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. This
+		OS can shutdown because of various reasons. When read, this
+		entry provides the status on why the card OS was shutdown.
+		Possible values are:
+		"nop" -  shutdown status is not applicable, when the card OS is
+			"online"
+		"crashed" - Shutdown because of a HW or SW crash.
+		"halted" - Shutdown because of a halt command.
+		"poweroff" - Shutdown because of a poweroff command.
+		"restart" - Shutdown because of a restart command.
+
+What:		/sys/class/mic/mic(x)/cmdline
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. Before
+		booting this card OS, it is possible to pass kernel command line
+		options to configure various features in it, similar to
+		self-bootable machines. When read, this entry provides
+		information about the current kernel command line options set to
+		boot the card OS. This entry can be written to change the
+		existing kernel command line options. Typically, the user would
+		want to read the current command line options, append new ones
+		or modify existing ones and then write the whole kernel command
+		line back to this entry.
+
+What:		/sys/class/mic/mic(x)/firmware
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the firmware image to be booted on the
+		card can be found. The entry can be written to change the
+		firmware image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic(x)/ramdisk
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the ramdisk image to be used during card
+		OS boot can be found. The entry can be written to change
+		the ramdisk image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic(x)/bootmode
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the current bootmode for
+		the card. This sysfs entry can be written with the following
+		valid strings:
+		a) linux - Boot a Linux image.
+		b) elf - Boot an elf image for flash updates.
+
+What:		/sys/class/mic/mic(x)/log_buf_addr
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address of the buffer where the card
+		OS log buffer can be read. This entry is written by the host
+		configuration daemon to set the log buffer address. The correct
+		log buffer address to be written can be found in the System.map
+		file of the card OS.
+
+What:		/sys/class/mic/mic(x)/log_buf_len
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address where the card OS log buffer
+		length can be read. This entry is written by host configuration
+		daemon to set the log buffer length address. The correct log
+		buffer length address to be written can be found in the
+		System.map file of the card OS.
diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid
new file mode 100644
index 0000000..ffb9536
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-sunxi-sid
@@ -0,0 +1,22 @@
+What:		/sys/devices/*/<our-device>/eeprom
+Date:		August 2013
+Contact:	Oliver Schinagl <oliver@schinagl.nl>
+Description:	read-only access to the SID (Security-ID) on current
+		A-series SoC's from Allwinner. Currently supports A10, A10s, A13
+		and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
+		whereas the newer A20 SoC exposes 512 bytes split into sections.
+		Besides the 16 bytes of SID, there's also an SJTAG area,
+		HDMI-HDCP key and some custom keys. Below a quick overview, for
+		details see the user manual:
+		0x000  128 bit root-key (sun[457]i)
+		0x010  128 bit boot-key (sun7i)
+		0x020   64 bit security-jtag-key (sun7i)
+		0x028   16 bit key configuration (sun7i)
+		0x02b   16 bit custom-vendor-key (sun7i)
+		0x02c  320 bit low general key (sun7i)
+		0x040   32 bit read-control access (sun7i)
+		0x064  224 bit low general key (sun7i)
+		0x080 2304 bit HDCP-key (sun7i)
+		0x1a0  768 bit high general key (sun7i)
+Users:		any user space application which wants to read the SID on
+		Allwinner's A-series of CPU's.
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index fe397f9..6c9d9d3 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -87,7 +87,10 @@
 !Ekernel/printk/printk.c
 !Ekernel/panic.c
 !Ekernel/sys.c
-!Ekernel/rcupdate.c
+!Ekernel/rcu/srcu.c
+!Ekernel/rcu/tree.c
+!Ekernel/rcu/tree_plugin.h
+!Ekernel/rcu/update.c
      </sect1>
 
      <sect1><title>Device Resource Management</title>
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 25b58ef..4f67683 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -91,7 +91,6 @@
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c
 !Efs/sysfs/symlink.c
-!Efs/sysfs/bin.c
   </chapter>
 
   <chapter id="debugfs">
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index d16d21b..46347f6 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -87,7 +87,7 @@
   <chapter id="rationale">
     <title>Rationale</title>
 	<para>
-	The original implementation of interrupt handling in Linux is using
+	The original implementation of interrupt handling in Linux uses
 	the __do_IRQ() super-handler, which is able to deal with every
 	type of interrupt logic.
 	</para>
@@ -111,19 +111,19 @@
 	</itemizedlist>
 	</para>
 	<para>
-	This split implementation of highlevel IRQ handlers allows us to
+	This split implementation of high-level IRQ handlers allows us to
 	optimize the flow of the interrupt handling for each specific
-	interrupt type. This reduces complexity in that particular codepath
+	interrupt type. This reduces complexity in that particular code path
 	and allows the optimized handling of a given type.
 	</para>
 	<para>
 	The original general IRQ implementation used hw_interrupt_type
 	structures and their ->ack(), ->end() [etc.] callbacks to
 	differentiate the flow control in the super-handler. This leads to
-	a mix of flow logic and lowlevel hardware logic, and it also leads
-	to unnecessary code duplication: for example in i386, there is a
-	ioapic_level_irq and a ioapic_edge_irq irq-type which share many
-	of the lowlevel details but have different flow handling.
+	a mix of flow logic and low-level hardware logic, and it also leads
+	to unnecessary code duplication: for example in i386, there is an
+	ioapic_level_irq and an ioapic_edge_irq IRQ-type which share many
+	of the low-level details but have different flow handling.
 	</para>
 	<para>
 	A more natural abstraction is the clean separation of the
@@ -132,23 +132,23 @@
 	<para>
 	Analysing a couple of architecture's IRQ subsystem implementations
 	reveals that most of them can use a generic set of 'irq flow'
-	methods and only need to add the chip level specific code.
+	methods and only need to add the chip-level specific code.
 	The separation is also valuable for (sub)architectures
-	which need specific quirks in the irq flow itself but not in the
-	chip-details - and thus provides a more transparent IRQ subsystem
+	which need specific quirks in the IRQ flow itself but not in the
+	chip details - and thus provides a more transparent IRQ subsystem
 	design.
 	</para>
 	<para>
-	Each interrupt descriptor is assigned its own highlevel flow
+	Each interrupt descriptor is assigned its own high-level flow
 	handler, which is normally one of the generic
-	implementations. (This highlevel flow handler implementation also
+	implementations. (This high-level flow handler implementation also
 	makes it simple to provide demultiplexing handlers which can be
 	found in embedded platforms on various architectures.)
 	</para>
 	<para>
 	The separation makes the generic interrupt handling layer more
 	flexible and extensible. For example, an (sub)architecture can
-	use a generic irq-flow implementation for 'level type' interrupts
+	use a generic IRQ-flow implementation for 'level type' interrupts
 	and add a (sub)architecture specific 'edge type' implementation.
 	</para>
 	<para>
@@ -172,9 +172,9 @@
     <para>
 	There are three main levels of abstraction in the interrupt code:
 	<orderedlist>
-	  <listitem><para>Highlevel driver API</para></listitem>
-	  <listitem><para>Highlevel IRQ flow handlers</para></listitem>
-	  <listitem><para>Chiplevel hardware encapsulation</para></listitem>
+	  <listitem><para>High-level driver API</para></listitem>
+	  <listitem><para>High-level IRQ flow handlers</para></listitem>
+	  <listitem><para>Chip-level hardware encapsulation</para></listitem>
 	</orderedlist>
     </para>
     <sect1 id="Interrupt_control_flow">
@@ -189,16 +189,16 @@
 	which are assigned to this interrupt.
 	</para>
 	<para>
-	Whenever an interrupt triggers, the lowlevel arch code calls into
-	the generic interrupt code by calling desc->handle_irq().
-	This highlevel IRQ handling function only uses desc->irq_data.chip
+	Whenever an interrupt triggers, the low-level architecture code calls
+	into the generic interrupt code by calling desc->handle_irq().
+	This high-level IRQ handling function only uses desc->irq_data.chip
 	primitives referenced by the assigned chip descriptor structure.
 	</para>
     </sect1>
     <sect1 id="Highlevel_Driver_API">
-	<title>Highlevel Driver API</title>
+	<title>High-level Driver API</title>
 	<para>
-	  The highlevel Driver API consists of following functions:
+	  The high-level Driver API consists of following functions:
 	  <itemizedlist>
 	  <listitem><para>request_irq()</para></listitem>
 	  <listitem><para>free_irq()</para></listitem>
@@ -216,7 +216,7 @@
 	</para>
     </sect1>
     <sect1 id="Highlevel_IRQ_flow_handlers">
-	<title>Highlevel IRQ flow handlers</title>
+	<title>High-level IRQ flow handlers</title>
 	<para>
 	  The generic layer provides a set of pre-defined irq-flow methods:
 	  <itemizedlist>
@@ -228,7 +228,7 @@
 	  <listitem><para>handle_edge_eoi_irq</para></listitem>
 	  <listitem><para>handle_bad_irq</para></listitem>
 	  </itemizedlist>
-	  The interrupt flow handlers (either predefined or architecture
+	  The interrupt flow handlers (either pre-defined or architecture
 	  specific) are assigned to specific interrupts by the architecture
 	  either during bootup or during device initialization.
 	</para>
@@ -297,7 +297,7 @@
 		<para>
 		handle_fasteoi_irq provides a generic implementation
 		for interrupts, which only need an EOI at the end of
-		the handler
+		the handler.
 		</para>
 		<para>
 		The following control flow is implemented (simplified excerpt):
@@ -394,7 +394,7 @@
 	The generic functions are intended for 'clean' architectures and chips,
 	which have no platform-specific IRQ handling quirks. If an architecture
 	needs to implement quirks on the 'flow' level then it can do so by
-	overriding the highlevel irq-flow handler.
+	overriding the high-level irq-flow handler.
 	</para>
 	</sect2>
 	<sect2 id="Delayed_interrupt_disable">
@@ -419,9 +419,9 @@
 	</sect2>
     </sect1>
     <sect1 id="Chiplevel_hardware_encapsulation">
-	<title>Chiplevel hardware encapsulation</title>
+	<title>Chip-level hardware encapsulation</title>
 	<para>
-	The chip level hardware descriptor structure irq_chip
+	The chip-level hardware descriptor structure irq_chip
 	contains all the direct chip relevant functions, which
 	can be utilized by the irq flow implementations.
 	  <itemizedlist>
@@ -429,14 +429,14 @@
 	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
 	  <listitem><para>irq_mask()</para></listitem>
 	  <listitem><para>irq_unmask()</para></listitem>
-	  <listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
+	  <listitem><para>irq_eoi() - Optional, required for EOI flow handlers</para></listitem>
 	  <listitem><para>irq_retrigger() - Optional</para></listitem>
 	  <listitem><para>irq_set_type() - Optional</para></listitem>
 	  <listitem><para>irq_set_wake() - Optional</para></listitem>
 	  </itemizedlist>
 	These primitives are strictly intended to mean what they say: ack means
 	ACK, masking means masking of an IRQ line, etc. It is up to the flow
-	handler(s) to use these basic units of lowlevel functionality.
+	handler(s) to use these basic units of low-level functionality.
 	</para>
     </sect1>
   </chapter>
@@ -445,7 +445,7 @@
      <title>__do_IRQ entry point</title>
      <para>
 	The original implementation __do_IRQ() was an alternative entry
-	point for all types of interrupts. It not longer exists.
+	point for all types of interrupts. It no longer exists.
      </para>
      <para>
 	This handler turned out to be not suitable for all
@@ -468,11 +468,11 @@
   <chapter id="genericchip">
      <title>Generic interrupt chip</title>
      <para>
-       To avoid copies of identical implementations of irq chips the
+       To avoid copies of identical implementations of IRQ chips the
        core provides a configurable generic interrupt chip
        implementation. Developers should check carefuly whether the
        generic chip fits their needs before implementing the same
-       functionality slightly different themself.
+       functionality slightly differently themselves.
      </para>
 !Ekernel/irq/generic-chip.c
   </chapter>
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 7703ec7..9126619 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -202,8 +202,8 @@
 	updater uses call_rcu_sched() or synchronize_sched(), then
 	the corresponding readers must disable preemption, possibly
 	by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
-	If the updater uses synchronize_srcu() or call_srcu(),
-	the the corresponding readers must use srcu_read_lock() and
+	If the updater uses synchronize_srcu() or call_srcu(), then
+	the corresponding readers must use srcu_read_lock() and
 	srcu_read_unlock(), and with the same srcu_struct.  The rules for
 	the expedited primitives are the same as for their non-expedited
 	counterparts.  Mixing things up will result in confusion and
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 8e9359d..6f3a005 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -12,12 +12,12 @@
 	This kernel configuration parameter defines the period of time
 	that RCU will wait from the beginning of a grace period until it
 	issues an RCU CPU stall warning.  This time period is normally
-	sixty seconds.
+	21 seconds.
 
 	This configuration parameter may be changed at runtime via the
 	/sys/module/rcutree/parameters/rcu_cpu_stall_timeout, however
 	this parameter is checked only at the beginning of a cycle.
-	So if you are 30 seconds into a 70-second stall, setting this
+	So if you are 10 seconds into a 40-second stall, setting this
 	sysfs parameter to (say) five will shorten the timeout for the
 	-next- stall, or the following warning for the current stall
 	(assuming the stall lasts long enough).  It will not affect the
@@ -32,7 +32,7 @@
 	also dump the stacks of any tasks that are blocking the current
 	RCU-preempt grace period.
 
-RCU_CPU_STALL_INFO
+CONFIG_RCU_CPU_STALL_INFO
 
 	This kernel configuration parameter causes the stall warning to
 	print out additional per-CPU diagnostic information, including
@@ -43,7 +43,8 @@
 	Although the lockdep facility is extremely useful, it does add
 	some overhead.  Therefore, under CONFIG_PROVE_RCU, the
 	RCU_STALL_DELAY_DELTA macro allows five extra seconds before
-	giving an RCU CPU stall warning message.
+	giving an RCU CPU stall warning message.  (This is a cpp
+	macro, not a kernel configuration parameter.)
 
 RCU_STALL_RAT_DELAY
 
@@ -52,7 +53,8 @@
 	However, if the offending CPU does not detect its own stall in
 	the number of jiffies specified by RCU_STALL_RAT_DELAY, then
 	some other CPU will complain.  This delay is normally set to
-	two jiffies.
+	two jiffies.  (This is a cpp macro, not a kernel configuration
+	parameter.)
 
 When a CPU detects that it is stalling, it will print a message similar
 to the following:
@@ -86,7 +88,12 @@
 
 INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies)
 
-This is rare, but does happen from time to time in real life.
+This is rare, but does happen from time to time in real life.  It is also
+possible for a zero-jiffy stall to be flagged in this case, depending
+on how the stall warning and the grace-period initialization happen to
+interact.  Please note that it is not possible to entirely eliminate this
+sort of false positive without resorting to things like stop_machine(),
+which is overkill for this sort of problem.
 
 If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
 more information is printed with the stall-warning message, for example:
@@ -216,4 +223,5 @@
 If you can reliably trigger the stall, ftrace can be quite helpful.
 
 RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE
-and with RCU's event tracing.
+and with RCU's event tracing.  For information on RCU's event tracing,
+see include/trace/events/rcu.h.
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
index 8f08a86e0..da0151d 100644
--- a/Documentation/arm/Marvell/README
+++ b/Documentation/arm/Marvell/README
@@ -88,6 +88,7 @@
         MV78230
         MV78260
         MV78460
+    NOTE: not to be confused with the non-SMP 78xx0 SoCs
 
   Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
   No public datasheet available.
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index e3f93fb..79452384 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -10,6 +10,10 @@
   Linux kernel mach directory: arch/arm/mach-sunxi
 
   Flavors:
+    * ARM926 based SoCs
+      - Allwinner F20 (sun3i)
+        + Not Supported
+
     * ARM Cortex-A8 based SoCs
       - Allwinner A10 (sun4i)
         + Datasheet
@@ -25,4 +29,24 @@
         + Datasheet
 	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
         + User Manual
-	  http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-08-08%29.pdf
+          http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
+
+    * Dual ARM Cortex-A7 based SoCs
+      - Allwinner A20 (sun7i)
+        + User Manual
+          http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+
+      - Allwinner A23
+        + Not Supported
+
+    * Quad ARM Cortex-A7 based SoCs
+      - Allwinner A31 (sun6i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf
+
+      - Allwinner A31s (sun6i)
+        + Not Supported
+
+    * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
+      - Allwinner A80
+        + Not Supported
\ No newline at end of file
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt
index 98df4a0..a9691cc 100644
--- a/Documentation/arm64/booting.txt
+++ b/Documentation/arm64/booting.txt
@@ -115,9 +115,10 @@
   External caches (if present) must be configured and disabled.
 
 - Architected timers
-  CNTFRQ must be programmed with the timer frequency.
-  If entering the kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0)
-  set where available.
+  CNTFRQ must be programmed with the timer frequency and CNTVOFF must
+  be programmed with a consistent value on all CPUs.  If entering the
+  kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where
+  available.
 
 - Coherency
   All CPUs to be booted by the kernel must be part of the same coherency
@@ -130,30 +131,46 @@
   the kernel image will be entered must be initialised by software at a
   higher exception level to prevent execution in an UNKNOWN state.
 
+The requirements described above for CPU mode, caches, MMUs, architected
+timers, coherency and system registers apply to all CPUs.  All CPUs must
+enter the kernel in the same exception level.
+
 The boot loader is expected to enter the kernel on each CPU in the
 following manner:
 
 - The primary CPU must jump directly to the first instruction of the
   kernel image.  The device tree blob passed by this CPU must contain
-  for each CPU node:
-
-    1. An 'enable-method' property. Currently, the only supported value
-       for this field is the string "spin-table".
-
-    2. A 'cpu-release-addr' property identifying a 64-bit,
-       zero-initialised memory location.
+  an 'enable-method' property for each cpu node.  The supported
+  enable-methods are described below.
 
   It is expected that the bootloader will generate these device tree
   properties and insert them into the blob prior to kernel entry.
 
-- Any secondary CPUs must spin outside of the kernel in a reserved area
-  of memory (communicated to the kernel by a /memreserve/ region in the
+- CPUs with a "spin-table" enable-method must have a 'cpu-release-addr'
+  property in their cpu node.  This property identifies a
+  naturally-aligned 64-bit zero-initalised memory location.
+
+  These CPUs should spin outside of the kernel in a reserved area of
+  memory (communicated to the kernel by a /memreserve/ region in the
   device tree) polling their cpu-release-addr location, which must be
   contained in the reserved region.  A wfe instruction may be inserted
   to reduce the overhead of the busy-loop and a sev will be issued by
   the primary CPU.  When a read of the location pointed to by the
-  cpu-release-addr returns a non-zero value, the CPU must jump directly
-  to this value.
+  cpu-release-addr returns a non-zero value, the CPU must jump to this
+  value.  The value will be written as a single 64-bit little-endian
+  value, so CPUs must convert the read value to their native endianness
+  before jumping to it.
+
+- CPUs with a "psci" enable method should remain outside of
+  the kernel (i.e. outside of the regions of memory described to the
+  kernel in the memory node, or in a reserved area of memory described
+  to the kernel by a /memreserve/ region in the device tree).  The
+  kernel will issue CPU_ON calls as described in ARM document number ARM
+  DEN 0022A ("Power State Coordination Interface System Software on ARM
+  processors") to bring CPUs into the kernel.
+
+  The device tree should contain a 'psci' node, as described in
+  Documentation/devicetree/bindings/arm/psci.txt.
 
 - Secondary CPU general-purpose register settings
   x0 = 0 (reserved for future use)
diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt
index 78a37712..5e054bf 100644
--- a/Documentation/arm64/memory.txt
+++ b/Documentation/arm64/memory.txt
@@ -21,7 +21,7 @@
 TTBR0.
 
 
-AArch64 Linux memory layout:
+AArch64 Linux memory layout with 4KB pages:
 
 Start			End			Size		Use
 -----------------------------------------------------------------------
@@ -39,13 +39,38 @@
 
 ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
 
-ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[guard]
+ffffffbffbe10000	ffffffbcffffffff	  ~2MB		[guard]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		modules
 
 ffffffc000000000	ffffffffffffffff	 256GB		kernel logical memory map
 
 
+AArch64 Linux memory layout with 64KB pages:
+
+Start			End			Size		Use
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		user
+
+fffffc0000000000	fffffdfbfffeffff	  ~2TB		vmalloc
+
+fffffdfbffff0000	fffffdfbffffffff	  64KB		[guard page]
+
+fffffdfc00000000	fffffdfdffffffff	   8GB		vmemmap
+
+fffffdfe00000000	fffffdfffbbfffff	  ~8GB		[guard, future vmmemap]
+
+fffffdfffbc00000	fffffdfffbdfffff	   2MB		earlyprintk device
+
+fffffdfffbe00000	fffffdfffbe0ffff	  64KB		PCI I/O space
+
+fffffdfffbe10000	fffffdfffbffffff	  ~2MB		[guard]
+
+fffffdfffc000000	fffffdffffffffff	  64MB		modules
+
+fffffe0000000000	ffffffffffffffff	   2TB		kernel logical memory map
+
+
 Translation table lookup with 4KB pages:
 
 +--------+--------+--------+--------+--------+--------+--------+--------+
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index db5858e..5fac246 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -9,9 +9,53 @@
 
 FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
 
-In the root node the Integrator/CP must have a /cpcon node pointing
-to the CP control registers, and the Integrator/AP must have a
-/syscon node pointing to the Integrator/AP system controller.
+Required nodes:
+
+- core-module: the root node to the Integrator platforms must have
+  a core-module with regs and the compatible string
+  "arm,core-module-integrator"
+
+  Required properties for the core module:
+  - regs: the location and size of the core module registers, one
+    range of 0x200 bytes.
+
+- syscon: the root node of the Integrator platforms must have a
+  system controller node pointong to the control registers,
+  with the compatible string
+  "arm,integrator-ap-syscon"
+  "arm,integrator-cp-syscon"
+  respectively.
+
+  Required properties for the system controller:
+  - regs: the location and size of the system controller registers,
+    one range of 0x100 bytes.
+
+  Required properties for the AP system controller:
+  - interrupts: the AP syscon node must include the logical module
+    interrupts, stated in order of module instance <module 0>,
+    <module 1>, <module 2> ... for the CP system controller this
+    is not required not of any use.
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator";
+		reg = <0x10000000 0x200>;
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon";
+		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logic module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
+	};
+};
 
 
 ARM Versatile Application and Platform Baseboards
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
index 61df564..d74091a 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
@@ -4,6 +4,8 @@
 Required properties:
 - compatible: Should be "marvell,mpic"
 - interrupt-controller: Identifies the node as an interrupt controller.
+- msi-controller: Identifies the node as an PCI Message Signaled
+  Interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. Should be 1.
   The cell is the IRQ number
 
@@ -24,6 +26,7 @@
               #address-cells = <1>;
               #size-cells = <1>;
               interrupt-controller;
+              msi-controller;
               reg = <0xd0020a00 0x1d0>,
                     <0xd0021070 0x58>;
         };
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index 723c205..d106146 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -7,7 +7,6 @@
   - interrupts: Should contain the IRQ line for the ADC
   - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
     device
-  - atmel,adc-num-channels: Number of channels available in the ADC
   - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
     defined in the datasheet
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
@@ -24,6 +23,13 @@
 		       resolution will be used.
   - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
   - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
+  - atmel,adc-ts-wires: Number of touch screen wires. Should be 4 or 5. If this
+                        value is set, then adc driver will enable touch screen
+                        support.
+    NOTE: when adc touch screen enabled, the adc hardware trigger will be
+          disabled. Since touch screen will occupied the trigger register.
+  - atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It
+                                     make touch detect more precision.
  
 Optional trigger Nodes:
   - Required properties:
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
index 92d36e2..f28d82b 100644
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -36,14 +36,18 @@
 
 	- reg
 		Usage: required
-		Value type: <prop-encoded-array>
+		Value type: Integer cells. A register entry, expressed as a pair
+			    of cells, containing base and size.
 		Definition: A standard property. Specifies base physical
 			    address of CCI control registers common to all
 			    interfaces.
 
 	- ranges:
 		Usage: required
-		Value type: <prop-encoded-array>
+		Value type: Integer cells. An array of range entries, expressed
+			    as a tuple of cells, containing child address,
+			    parent address and the size of the region in the
+			    child address space.
 		Definition: A standard property. Follow rules in the ePAPR for
 			    hierarchical bus addressing. CCI interfaces
 			    addresses refer to the parent node addressing
@@ -74,11 +78,49 @@
 
 		- reg:
 			Usage: required
-			Value type: <prop-encoded-array>
+			Value type: Integer cells. A register entry, expressed
+				    as a pair of cells, containing base and
+				    size.
 			Definition: the base address and size of the
 				    corresponding interface programming
 				    registers.
 
+	- CCI PMU node
+
+		Parent node must be CCI interconnect node.
+
+		A CCI pmu node must contain the following properties:
+
+		- compatible
+			Usage: required
+			Value type: <string>
+			Definition: must be "arm,cci-400-pmu"
+
+		- reg:
+			Usage: required
+			Value type: Integer cells. A register entry, expressed
+				    as a pair of cells, containing base and
+				    size.
+			Definition: the base address and size of the
+				    corresponding interface programming
+				    registers.
+
+		- interrupts:
+			Usage: required
+			Value type: Integer cells. Array of interrupt specifier
+				    entries, as defined in
+				    ../interrupt-controller/interrupts.txt.
+			Definition: list of counter overflow interrupts, one per
+				    counter. The interrupts must be specified
+				    starting with the cycle counter overflow
+				    interrupt, followed by counter0 overflow
+				    interrupt, counter1 overflow interrupt,...
+				    ,counterN overflow interrupt.
+
+				    The CCI PMU has an interrupt signal for each
+				    counter. The number of interrupts must be
+				    equal to the number of counters.
+
 * CCI interconnect bus masters
 
 	Description: masters in the device tree connected to a CCI port
@@ -144,7 +186,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x6000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
 
 		cci_control0: slave-if@1000 {
 			compatible = "arm,cci-400-ctrl-if";
@@ -163,6 +205,16 @@
 			interface-type = "ace";
 			reg = <0x5000 0x1000>;
 		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>,
+				      <0 105 4>;
+		};
 	};
 
 This CCI node corresponds to a CCI component whose control registers sits
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 91b7049..808c154 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -21,7 +21,8 @@
 Optional properties:
 - ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
   during suspend.
-
+- ti,no-reset-on-init: When present, the module should not be reset at init
+- ti,no-idle-on-init: When present, the module should not be idled at init
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/arm/vic.txt b/Documentation/devicetree/bindings/arm/vic.txt
index 266716b..dd52721 100644
--- a/Documentation/devicetree/bindings/arm/vic.txt
+++ b/Documentation/devicetree/bindings/arm/vic.txt
@@ -18,6 +18,15 @@
 Optional properties:
 
 - interrupts : Interrupt source for parent controllers if the VIC is nested.
+- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
+  represents single interrupt source, starting from source 0 at LSb and ending
+  at source 31 at MSb. A bit that is set means that the source is wired and
+  clear means otherwise. If unspecified, defaults to all valid.
+- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
+  configured as wake up source for the system. Order of bits is the same as for
+  valid-mask property. A set bit means that this interrupt source can be
+  configured as a wake up source for the system. If unspecied, defaults to all
+  interrupt sources configurable as wake up sources.
 
 Example:
 
@@ -26,4 +35,7 @@
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		reg = <0x60000 0x1000>;
+
+		valid-mask = <0xffffff7f>;
+		valid-wakeup-mask = <0x0000ff7f>;
 	};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 5a90a72..6aab72b 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -215,6 +215,11 @@
 	cko2      		200
 	cko      		201
 	vdoa      		202
+	pll4_audio_div		203
+	lvds1_sel		204
+	lvds2_sel		205
+	lvds1_gate		206
+	lvds2_gate		207
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
new file mode 100644
index 0000000..c62391f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
@@ -0,0 +1,19 @@
+* Core Divider Clock bindings for Marvell MVEBU SoCs
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = nand (NAND clock)
+
+Required properties:
+- compatible : must be "marvell,armada-370-corediv-clock"
+- reg : must be the register address of Core Divider control register
+- #clock-cells : from common clock binding; shall be set to 1
+- clocks : must be set to the parent's phandle
+
+Example:
+
+corediv_clk: corediv-clocks@18740 {
+	compatible = "marvell,armada-370-corediv-clock";
+	reg = <0x18740 0xc>;
+	#clock-cells = <1>;
+	clocks = <&pll>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index cffc93d..fc2910f 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -1,10 +1,10 @@
-* Gated Clock bindings for Marvell Orion SoCs
+* Gated Clock bindings for Marvell EBU SoCs
 
-Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
-some power. The clock consumer should specify the desired clock by having
-the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
-the corresponding clock gating control bit in HW to ease manual clock lookup
-in datasheet.
+Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be
+gated to save some power. The clock consumer should specify the desired clock
+by having the clock ID in its "clocks" phandle cell. The clock ID is directly
+mapped to the corresponding clock gating control bit in HW to ease manual clock
+lookup in datasheet.
 
 The following is a list of provided IDs for Armada 370:
 ID	Clock	Peripheral
@@ -94,6 +94,8 @@
 
 Required properties:
 - compatible : shall be one of the following:
+	"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
+	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
 	"marvell,dove-gating-clock" - for Dove SoC clock gating
 	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
 - reg : shall be the register address of the Clock Gating Control register
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 00a5c264..91a748f 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -45,8 +45,8 @@
 
 Clock consumers should specify the desired clocks they use with a
 "clocks" phandle cell. Consumers that are using a gated clock should
-provide an additional ID in their clock property. The values of this
-ID are documented in sunxi/<soc>-gates.txt.
+provide an additional ID in their clock property. This ID is the
+offset of the bit controlling this particular gate in the register.
 
 For example:
 
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt
deleted file mode 100644
index 6a03475..0000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2*
-    EHCI1					3
-    OHCI1					4*
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-    MS						12**
-    NAND					13
-    SDRAM					14
-
-    ACE						16
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-    PATA					24
-    SATA					25**
-    GPS						26*
-
-    VE						32
-    TVD						33
-    TVE0					34
-    TVE1					35
-    LCD0					36
-    LCD1					37
-
-    CSI0					40
-    CSI1					41
-
-    HDMI					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    MP						50
-
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
-
-    CODEC					0
-    SPDIF					1*
-    AC97					2
-    IIS						3
-
-    PIO						5
-    IR0						6
-    IR1						7
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    CAN						4
-    SCR						5
-    PS20					6
-    PS21					7
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-    UART6					22
-    UART7					23
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt
deleted file mode 100644
index d24279f..0000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun5i-a10s-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2
-
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-
-    NAND					13
-    SDRAM					14
-
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-
-    GPS						26
-
-    HSTIMER					28
-
-    VE						32
-
-    TVE						34
-
-    LCD						36
-
-    CSI						40
-
-    HDMI					43
-    DE_BE					44
-
-    DE_FE					46
-
-    IEP						51
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun5i-a10s-apb0-gates-clk")
-
-    CODEC					0
-
-    IIS						3
-
-    PIO						5
-    IR						6
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun5i-a10s-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt
deleted file mode 100644
index 006b6df..0000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun5i-a13-ahb-gates-clk")
-
-    USBOTG					0
-    EHCI					1
-    OHCI					2
-
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-
-    NAND					13
-    SDRAM					14
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-
-    STIMER					28
-
-    VE						32
-
-    LCD						36
-
-    CSI						40
-
-    DE_BE					44
-
-    DE_FE					46
-
-    IEP						51
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk")
-
-    CODEC					0
-
-    PIO						5
-    IR						6
-
-  * APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    UART1					17
-
-    UART3					19
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
deleted file mode 100644
index fe44932..0000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
-
-    MIPI DSI					1
-
-    SS						5
-    DMA						6
-
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-
-    NAND1					12
-    NAND0					13
-    SDRAM					14
-
-    GMAC					17
-    TS						18
-    HSTIMER					19
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-    USB_OTG					24
-
-    EHCI0					26
-    EHCI1					27
-
-    OHCI0					29
-    OHCI1					30
-    OHCI2					31
-    VE						32
-
-    LCD0					36
-    LCD1					37
-
-    CSI						40
-
-    HDMI					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    MP						50
-
-    GPU						52
-
-    DEU0					55
-    DEU1					56
-    DRC0					57
-    DRC1					58
-
-  * APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
-
-    CODEC					0
-
-    DIGITAL MIC					4
-    PIO						5
-
-    DAUDIO0					12
-    DAUDIO1					13
-
-  * APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-    I2C3					3
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
deleted file mode 100644
index 357f4fd..0000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2
-    EHCI1					3
-    OHCI1					4
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-    MS						12
-    NAND					13
-    SDRAM					14
-
-    ACE						16
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-
-    SATA					25
-
-    HSTIMER					28
-
-    VE						32
-    TVD						33
-    TVE0					34
-    TVE1					35
-    LCD0					36
-    LCD1					37
-
-    CSI0					40
-    CSI1					41
-
-    HDMI1					42
-    HDMI0					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    GMAC					49
-    MP						50
-
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
-
-    CODEC					0
-    SPDIF					1
-    AC97					2
-    IIS0					3
-    IIS1					4
-    PIO						5
-    IR0						6
-    IR1						7
-    IIS2					8
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-    I2C3					3
-    CAN						4
-    SCR						5
-    PS20					6
-    PS21					7
-
-    I2C4					15
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-    UART6					22
-    UART7					23
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt
new file mode 100644
index 0000000..fd97176
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt
@@ -0,0 +1,31 @@
+OMAP SoC AES crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  AES versions:
+  - "ti,omap2-aes" for OMAP2.
+  - "ti,omap3-aes" for OMAP3.
+  - "ti,omap4-aes" for OMAP4 and AM33XX.
+  Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
+  more algorithms) but they are incompatible with OMAP4.
+- ti,hwmods: Name of the hwmod associated with the AES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the AES module.
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+
+Example:
+	/* AM335x */
+	aes: aes@53500000 {
+		compatible = "ti,omap4-aes";
+		ti,hwmods = "aes";
+		reg = <0x53500000 0xa0>;
+		interrupts = <102>;
+		dmas = <&edma 6>,
+		       <&edma 5>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
new file mode 100644
index 0000000..f839acd
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
@@ -0,0 +1,28 @@
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SHAM versions:
+  - "ti,omap2-sham" for OMAP2 & OMAP3.
+  - "ti,omap4-sham" for OMAP4 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifiers for the rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+	/* AM335x */
+	sham: sham@53100000 {
+		compatible = "ti,omap4-sham";
+		ti,hwmods = "sham";
+		reg = <0x53100000 0x200>;
+		interrupts = <109>;
+		dmas = <&edma 36>;
+		dma-names = "rx";
+	};
diff --git a/Documentation/devicetree/bindings/hwrng/omap_rng.txt b/Documentation/devicetree/bindings/hwrng/omap_rng.txt
new file mode 100644
index 0000000..6a62acd
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwrng/omap_rng.txt
@@ -0,0 +1,22 @@
+OMAP SoC HWRNG Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  RNG versions:
+  - "ti,omap2-rng" for OMAP2.
+  - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the RNG module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt number for the RNG module.
+		Only used for "ti,omap4-rng".
+
+Example:
+/* AM335x */
+rng: rng@48310000 {
+	compatible = "ti,omap4-rng";
+	ti,hwmods = "rng";
+	reg = <0x48310000 0x2000>;
+	interrupts = <111>;
+};
diff --git a/Documentation/devicetree/bindings/iio/light/cm36651.txt b/Documentation/devicetree/bindings/iio/light/cm36651.txt
new file mode 100644
index 0000000..c03e19d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/cm36651.txt
@@ -0,0 +1,26 @@
+* Capella CM36651 I2C Proximity and Color Light sensor
+
+Required properties:
+- compatible: must be "capella,cm36651"
+- reg: the I2C address of the device
+- interrupts: interrupt-specifier for the sole interrupt
+	      generated by the device
+- vled-supply: regulator for the IR LED. IR_LED is a part
+	      of the cm36651 for proximity detection.
+	      As covered in ../../regulator/regulator.txt
+
+Example:
+
+	i2c_cm36651: i2c-gpio {
+		/* ... */
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 0>;
+			vled-supply = <&ps_als_reg>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt b/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
new file mode 100644
index 0000000..9231c82
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
@@ -0,0 +1,21 @@
+* Sharp GP2AP020A00F I2C Proximity/ALS sensor
+
+The proximity detector sensor requires power supply
+for its built-in led. It is also defined by this binding.
+
+Required properties:
+
+  - compatible : should be "sharp,gp2ap020a00f"
+  - reg : the I2C slave address of the light sensor
+  - interrupts : interrupt specifier for the sole interrupt generated
+		 by the device
+  - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt
+
+Example:
+
+gp2ap020a00f@39 {
+	compatible = "sharp,gp2ap020a00f";
+	reg = <0x39>;
+	interrupts = <2 0>;
+	vled-supply = <...>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
index 57edb30..3d3b2b9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
@@ -8,9 +8,6 @@
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source. The value shall be 1.
 
-For the valid interrupt sources for your SoC, see the documentation in
-sunxi/<soc>.txt
-
 Example:
 
 intc: interrupt-controller {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt
deleted file mode 100644
index 76b98c8..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-Allwinner A10 (sun4i) interrupt sources
----------------------------------------
-
-The interrupt sources available for the Allwinner A10 SoC are the
-following one:
-
-0: ENMI
-1: UART0
-2: UART1
-3: UART2
-4: UART3
-5: IR0
-6: IR1
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-13: SPDIF
-14: AC97
-15: TS
-16: I2S
-17: UART4
-18: UART5
-19: UART6
-20: UART7
-21: KEYPAD
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-26: CAN
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: MMC0
-33: MMC1
-34: MMC2
-35: MMC3
-36: MEMSTICK
-37: NAND
-38: USB0
-39: USB1
-40: USB2
-41: SCR
-42: CSI0
-43: CSI1
-44: LCDCTRL0
-45: LCDCTRL1
-46: MP
-47: DEFEBE0
-48: DEFEBE1
-49: PMU
-50: SPI3
-51: TZASC
-52: PATA
-53: VE
-54: SS
-55: EMAC
-56: SATA
-57: GPS
-58: HDMI
-59: TVE
-60: ACE
-61: TVD
-62: PS2_0
-63: PS2_1
-64: USB3
-65: USB4
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt
deleted file mode 100644
index 2ec3b5c..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Allwinner A13 (sun5i) interrupt sources
----------------------------------------
-
-The interrupt sources available for the Allwinner A13 SoC are the
-following one:
-
-0: ENMI
-2: UART1
-4: UART3
-5: IR
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: MMC0
-33: MMC1
-34: MMC2
-37: NAND
-38: USB OTG
-39: USB EHCI
-40: USB OHCI
-42: CSI
-44: LCDCTRL
-47: DEFEBE
-49: PMU
-53: VE
-54: SS
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1
diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
new file mode 100644
index 0000000..68ba372
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
@@ -0,0 +1,17 @@
+Allwinner sunxi-sid
+
+Required properties:
+- compatible: "allwinner,sun4i-sid" or "allwinner,sun7i-a20-sid".
+- reg: Should contain registers location and length
+
+Example for sun4i:
+	sid@01c23800 {
+		compatible = "allwinner,sun4i-sid";
+		reg = <0x01c23800 0x10>
+	};
+
+Example for sun7i:
+	sid@01c23800 {
+		compatible = "allwinner,sun7i-a20-sid";
+		reg = <0x01c23800 0x200>
+	};
diff --git a/Documentation/devicetree/bindings/misc/ti,dac7512.txt b/Documentation/devicetree/bindings/misc/ti,dac7512.txt
new file mode 100644
index 0000000..1db4593
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ti,dac7512.txt
@@ -0,0 +1,20 @@
+TI DAC7512 DEVICETREE BINDINGS
+
+Required properties:
+
+	- "compatible"		Must be set to "ti,dac7512"
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+
+Example:
+
+	spi_master {
+		dac7512: dac7512@0 {
+			compatible = "ti,dac7512";
+			reg = <0>; /* CS0 */
+			spi-max-frequency = <1000000>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index ed271fc..8c8908a 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,8 +20,17 @@
 ti,non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
 ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
+dmas: List of DMA specifiers with the controller specific format
+as described in the generic DMA client binding. A tx and rx
+specifier is required.
+dma-names: List of DMA request names. These strings correspond
+1:1 with the DMA specifiers listed in dmas. The string naming is
+to be "rx" and "tx" for RX and TX DMA requests, respectively.
 
-Example:
+Examples:
+
+[hwmod populated DMA resources]
+
 	mmc1: mmc@0x4809c000 {
 		compatible = "ti,omap4-hsmmc";
 		reg = <0x4809c000 0x400>;
@@ -31,3 +40,18 @@
 		vmmc-supply = <&vmmc>; /* phandle to regulator node */
 		ti,non-removable;
 	};
+
+[generic DMA request binding]
+
+	mmc1: mmc@0x4809c000 {
+		compatible = "ti,omap4-hsmmc";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		ti,dual-volt;
+		bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		ti,non-removable;
+		dmas = <&edma 24
+			&edma 25>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 9556e2f..08c716b 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -5,6 +5,7 @@
 - compatible: one of the following values:
     marvell,armada-370-pcie
     marvell,armada-xp-pcie
+    marvell,dove-pcie
     marvell,kirkwood-pcie
 - #address-cells, set to <3>
 - #size-cells, set to <2>
@@ -14,6 +15,8 @@
 - ranges: ranges describing the MMIO registers to control the PCIe
   interfaces, and ranges describing the MBus windows needed to access
   the memory and I/O regions of each PCIe interface.
+- msi-parent: Link to the hardware entity that serves as the Message
+  Signaled Interrupt controller for this PCI controller.
 
 The ranges describing the MMIO registers have the following layout:
 
@@ -74,6 +77,8 @@
 - marvell,pcie-lane: the physical PCIe lane number, for ports having
   multiple lanes. If this property is not found, we assume that the
   value is 0.
+- reset-gpios: optional gpio to PERST#
+- reset-delay-us: delay in us to wait after reset de-assertion
 
 Example:
 
@@ -86,6 +91,7 @@
 	#size-cells = <2>;
 
 	bus-range = <0x00 0xff>;
+	msi-parent = <&mpic>;
 
 	ranges =
 	       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000	/* Port 0.0 registers */
@@ -135,6 +141,10 @@
 		interrupt-map = <0 0 0 0 &mpic 58>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <0>;
+		/* low-active PERST# reset on GPIO 25 */
+		reset-gpios = <&gpio0 25 1>;
+		/* wait 20ms for device settle after reset deassertion */
+		reset-delay-us = <20000>;
 		clocks = <&gateclk 5>;
 		status = "disabled";
 	};
diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt
new file mode 100644
index 0000000..8ae844f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt
@@ -0,0 +1,66 @@
+This document explains only the device tree data binding. For general
+information about PHY subsystem refer to Documentation/phy.txt
+
+PHY device node
+===============
+
+Required Properties:
+#phy-cells:	Number of cells in a PHY specifier;  The meaning of all those
+		cells is defined by the binding for the phy node. The PHY
+		provider can use the values in cells to find the appropriate
+		PHY.
+
+For example:
+
+phys: phy {
+    compatible = "xxx";
+    reg = <...>;
+    .
+    .
+    #phy-cells = <1>;
+    .
+    .
+};
+
+That node describes an IP block (PHY provider) that implements 2 different PHYs.
+In order to differentiate between these 2 PHYs, an additonal specifier should be
+given while trying to get a reference to it.
+
+PHY user node
+=============
+
+Required Properties:
+phys : the phandle for the PHY device (used by the PHY subsystem)
+phy-names : the names of the PHY corresponding to the PHYs present in the
+	    *phys* phandle
+
+Example 1:
+usb1: usb_otg_ss@xxx {
+    compatible = "xxx";
+    reg = <xxx>;
+    .
+    .
+    phys = <&usb2_phy>, <&usb3_phy>;
+    phy-names = "usb2phy", "usb3phy";
+    .
+    .
+};
+
+This node represents a controller that uses two PHYs, one for usb2 and one for
+usb3.
+
+Example 2:
+usb2: usb_otg_ss@xxx {
+    compatible = "xxx";
+    reg = <xxx>;
+    .
+    .
+    phys = <&phys 1>;
+    phy-names = "usbphy";
+    .
+    .
+};
+
+This node represents a controller that uses one of the PHYs of the PHY provider
+device defined previously. Note that the phy handle has an additional specifier
+"1" to differentiate between the two PHYs.
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
new file mode 100644
index 0000000..c0fccaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -0,0 +1,22 @@
+Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be "samsung,s5pv210-mipi-video-phy";
+- reg : offset and length of the MIPI DPHY register set;
+- #phy-cells : from the generic phy bindings, must be 1;
+
+For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
+the PHY specifier identifies the PHY and its meaning is as follows:
+  0 - MIPI CSIS 0,
+  1 - MIPI DSIM 0,
+  2 - MIPI CSIS 1,
+  3 - MIPI DSIM 1.
+
+Samsung EXYNOS SoC series Display Port PHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be "samsung,exynos5250-dp-video-phy";
+- reg : offset and length of the Display Port PHY register set;
+- #phy-cells : from the generic PHY bindings, must be 0;
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
index 3077370..1e70a8a 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
@@ -59,16 +59,16 @@
 
 Optional subnode-properties:
 - fsl,drive-strength: Integer.
-    0: 4 mA
-    1: 8 mA
-    2: 12 mA
-    3: 16 mA
+    0: MXS_DRIVE_4mA
+    1: MXS_DRIVE_8mA
+    2: MXS_DRIVE_12mA
+    3: MXS_DRIVE_16mA
 - fsl,voltage: Integer.
-    0: 1.8 V
-    1: 3.3 V
+    0: MXS_VOLTAGE_LOW  - 1.8 V
+    1: MXS_VOLTAGE_HIGH - 3.3 V
 - fsl,pull-up: Integer.
-    0: Disable the internal pull-up
-    1: Enable the internal pull-up
+    0: MXS_PULL_DISABLE - Disable the internal pull-up
+    1: MXS_PULL_ENABLE  - Enable the internal pull-up
 
 Note that when enabling the pull-up, the internal pad keeper gets disabled.
 Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
@@ -85,23 +85,32 @@
 	mmc0_8bit_pins_a: mmc0-8bit@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x2000 0x2010 0x2020 0x2030
-			0x2040 0x2050 0x2060 0x2070
-			0x2080 0x2090 0x20a0>;
-		fsl,drive-strength = <1>;
-		fsl,voltage = <1>;
-		fsl,pull-up = <1>;
+			MX28_PAD_SSP0_DATA0__SSP0_D0
+			MX28_PAD_SSP0_DATA1__SSP0_D1
+			MX28_PAD_SSP0_DATA2__SSP0_D2
+			MX28_PAD_SSP0_DATA3__SSP0_D3
+			MX28_PAD_SSP0_DATA4__SSP0_D4
+			MX28_PAD_SSP0_DATA5__SSP0_D5
+			MX28_PAD_SSP0_DATA6__SSP0_D6
+			MX28_PAD_SSP0_DATA7__SSP0_D7
+			MX28_PAD_SSP0_CMD__SSP0_CMD
+			MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+			MX28_PAD_SSP0_SCK__SSP0_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
 	};
 
 	mmc_cd_cfg: mmc-cd-cfg {
-		fsl,pinmux-ids = <0x2090>;
-		fsl,pull-up = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
 	mmc_sck_cfg: mmc-sck-cfg {
-		fsl,pinmux-ids = <0x20a0>;
-		fsl,drive-strength = <2>;
-		fsl,pull-up = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_SCK__SSP0_SCK>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 };
 
@@ -112,811 +121,7 @@
 node mmc0-8bit defines.  Only the configuration properties to be adjusted need
 to be listed in the config nodes.
 
-Valid values for i.MX28 pinmux-id:
-
-pinmux						id
-------						--
-MX28_PAD_GPMI_D00__GPMI_D0			0x0000
-MX28_PAD_GPMI_D01__GPMI_D1			0x0010
-MX28_PAD_GPMI_D02__GPMI_D2			0x0020
-MX28_PAD_GPMI_D03__GPMI_D3			0x0030
-MX28_PAD_GPMI_D04__GPMI_D4			0x0040
-MX28_PAD_GPMI_D05__GPMI_D5			0x0050
-MX28_PAD_GPMI_D06__GPMI_D6			0x0060
-MX28_PAD_GPMI_D07__GPMI_D7			0x0070
-MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
-MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
-MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
-MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
-MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
-MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
-MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
-MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
-MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
-MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
-MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
-MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
-MX28_PAD_LCD_D00__LCD_D0			0x1000
-MX28_PAD_LCD_D01__LCD_D1			0x1010
-MX28_PAD_LCD_D02__LCD_D2			0x1020
-MX28_PAD_LCD_D03__LCD_D3			0x1030
-MX28_PAD_LCD_D04__LCD_D4			0x1040
-MX28_PAD_LCD_D05__LCD_D5			0x1050
-MX28_PAD_LCD_D06__LCD_D6			0x1060
-MX28_PAD_LCD_D07__LCD_D7			0x1070
-MX28_PAD_LCD_D08__LCD_D8			0x1080
-MX28_PAD_LCD_D09__LCD_D9			0x1090
-MX28_PAD_LCD_D10__LCD_D10			0x10a0
-MX28_PAD_LCD_D11__LCD_D11			0x10b0
-MX28_PAD_LCD_D12__LCD_D12			0x10c0
-MX28_PAD_LCD_D13__LCD_D13			0x10d0
-MX28_PAD_LCD_D14__LCD_D14			0x10e0
-MX28_PAD_LCD_D15__LCD_D15			0x10f0
-MX28_PAD_LCD_D16__LCD_D16			0x1100
-MX28_PAD_LCD_D17__LCD_D17			0x1110
-MX28_PAD_LCD_D18__LCD_D18			0x1120
-MX28_PAD_LCD_D19__LCD_D19			0x1130
-MX28_PAD_LCD_D20__LCD_D20			0x1140
-MX28_PAD_LCD_D21__LCD_D21			0x1150
-MX28_PAD_LCD_D22__LCD_D22			0x1160
-MX28_PAD_LCD_D23__LCD_D23			0x1170
-MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
-MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
-MX28_PAD_LCD_RS__LCD_RS				0x11a0
-MX28_PAD_LCD_CS__LCD_CS				0x11b0
-MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
-MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
-MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
-MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
-MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
-MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
-MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
-MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
-MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
-MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
-MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
-MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
-MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
-MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
-MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
-MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
-MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
-MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
-MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
-MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
-MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
-MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
-MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
-MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
-MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
-MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
-MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
-MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
-MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
-MX28_PAD_AUART0_RX__AUART0_RX			0x3000
-MX28_PAD_AUART0_TX__AUART0_TX			0x3010
-MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
-MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
-MX28_PAD_AUART1_RX__AUART1_RX			0x3040
-MX28_PAD_AUART1_TX__AUART1_TX			0x3050
-MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
-MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
-MX28_PAD_AUART2_RX__AUART2_RX			0x3080
-MX28_PAD_AUART2_TX__AUART2_TX			0x3090
-MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
-MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
-MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
-MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
-MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
-MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
-MX28_PAD_PWM0__PWM_0				0x3100
-MX28_PAD_PWM1__PWM_1				0x3110
-MX28_PAD_PWM2__PWM_2				0x3120
-MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
-MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
-MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
-MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
-MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
-MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
-MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
-MX28_PAD_SPDIF__SPDIF_TX			0x31b0
-MX28_PAD_PWM3__PWM_3				0x31c0
-MX28_PAD_PWM4__PWM_4				0x31d0
-MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
-MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
-MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
-MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
-MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
-MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
-MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
-MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
-MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
-MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
-MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
-MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
-MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
-MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
-MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
-MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
-MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
-MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
-MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
-MX28_PAD_EMI_D00__EMI_DATA0			0x5000
-MX28_PAD_EMI_D01__EMI_DATA1			0x5010
-MX28_PAD_EMI_D02__EMI_DATA2			0x5020
-MX28_PAD_EMI_D03__EMI_DATA3			0x5030
-MX28_PAD_EMI_D04__EMI_DATA4			0x5040
-MX28_PAD_EMI_D05__EMI_DATA5			0x5050
-MX28_PAD_EMI_D06__EMI_DATA6			0x5060
-MX28_PAD_EMI_D07__EMI_DATA7			0x5070
-MX28_PAD_EMI_D08__EMI_DATA8			0x5080
-MX28_PAD_EMI_D09__EMI_DATA9			0x5090
-MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
-MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
-MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
-MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
-MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
-MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
-MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
-MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
-MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
-MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
-MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
-MX28_PAD_EMI_CLK__EMI_CLK			0x5150
-MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
-MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
-MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
-MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
-MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
-MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
-MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
-MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
-MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
-MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
-MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
-MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
-MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
-MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
-MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
-MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
-MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
-MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
-MX28_PAD_EMI_BA0__EMI_BA0			0x6100
-MX28_PAD_EMI_BA1__EMI_BA1			0x6110
-MX28_PAD_EMI_BA2__EMI_BA2			0x6120
-MX28_PAD_EMI_CASN__EMI_CASN			0x6130
-MX28_PAD_EMI_RASN__EMI_RASN			0x6140
-MX28_PAD_EMI_WEN__EMI_WEN			0x6150
-MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
-MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
-MX28_PAD_EMI_CKE__EMI_CKE			0x6180
-MX28_PAD_GPMI_D00__SSP1_D0			0x0001
-MX28_PAD_GPMI_D01__SSP1_D1			0x0011
-MX28_PAD_GPMI_D02__SSP1_D2			0x0021
-MX28_PAD_GPMI_D03__SSP1_D3			0x0031
-MX28_PAD_GPMI_D04__SSP1_D4			0x0041
-MX28_PAD_GPMI_D05__SSP1_D5			0x0051
-MX28_PAD_GPMI_D06__SSP1_D6			0x0061
-MX28_PAD_GPMI_D07__SSP1_D7			0x0071
-MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
-MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
-MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
-MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
-MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
-MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
-MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
-MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
-MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
-MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
-MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
-MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
-MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
-MX28_PAD_LCD_D03__ETM_DA8			0x1031
-MX28_PAD_LCD_D04__ETM_DA9			0x1041
-MX28_PAD_LCD_D08__ETM_DA3			0x1081
-MX28_PAD_LCD_D09__ETM_DA4			0x1091
-MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
-MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
-MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
-MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
-MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
-MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
-MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
-MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
-MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
-MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
-MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
-MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
-MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
-MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
-MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
-MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
-MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
-MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
-MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
-MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
-MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
-MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
-MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
-MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
-MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
-MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
-MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
-MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
-MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
-MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
-MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
-MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
-MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
-MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
-MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
-MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
-MX28_PAD_AUART1_RTS__USB0_ID			0x3071
-MX28_PAD_AUART2_RX__SSP3_D1			0x3081
-MX28_PAD_AUART2_TX__SSP3_D2			0x3091
-MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
-MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
-MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
-MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
-MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
-MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
-MX28_PAD_PWM0__I2C1_SCL				0x3101
-MX28_PAD_PWM1__I2C1_SDA				0x3111
-MX28_PAD_PWM2__USB0_ID				0x3121
-MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
-MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
-MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
-MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
-MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
-MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
-MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
-MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
-MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
-MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
-MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
-MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
-MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
-MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
-MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
-MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
-MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
-MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
-MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
-MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
-MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
-MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
-MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
-MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
-MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
-MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
-MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
-MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
-MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
-MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
-MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
-MX28_PAD_LCD_D00__ETM_DA0			0x1002
-MX28_PAD_LCD_D01__ETM_DA1			0x1012
-MX28_PAD_LCD_D02__ETM_DA2			0x1022
-MX28_PAD_LCD_D03__ETM_DA3			0x1032
-MX28_PAD_LCD_D04__ETM_DA4			0x1042
-MX28_PAD_LCD_D05__ETM_DA5			0x1052
-MX28_PAD_LCD_D06__ETM_DA6			0x1062
-MX28_PAD_LCD_D07__ETM_DA7			0x1072
-MX28_PAD_LCD_D08__ETM_DA8			0x1082
-MX28_PAD_LCD_D09__ETM_DA9			0x1092
-MX28_PAD_LCD_D10__ETM_DA10			0x10a2
-MX28_PAD_LCD_D11__ETM_DA11			0x10b2
-MX28_PAD_LCD_D12__ETM_DA12			0x10c2
-MX28_PAD_LCD_D13__ETM_DA13			0x10d2
-MX28_PAD_LCD_D14__ETM_DA14			0x10e2
-MX28_PAD_LCD_D15__ETM_DA15			0x10f2
-MX28_PAD_LCD_D16__ETM_DA7			0x1102
-MX28_PAD_LCD_D17__ETM_DA6			0x1112
-MX28_PAD_LCD_D18__ETM_DA5			0x1122
-MX28_PAD_LCD_D19__ETM_DA4			0x1132
-MX28_PAD_LCD_D20__ETM_DA3			0x1142
-MX28_PAD_LCD_D21__ETM_DA2			0x1152
-MX28_PAD_LCD_D22__ETM_DA1			0x1162
-MX28_PAD_LCD_D23__ETM_DA0			0x1172
-MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
-MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
-MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
-MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
-MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
-MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
-MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
-MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
-MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
-MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
-MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
-MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
-MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
-MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
-MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
-MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
-MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
-MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
-MX28_PAD_AUART0_RX__DUART_CTS			0x3002
-MX28_PAD_AUART0_TX__DUART_RTS			0x3012
-MX28_PAD_AUART0_CTS__DUART_RX			0x3022
-MX28_PAD_AUART0_RTS__DUART_TX			0x3032
-MX28_PAD_AUART1_RX__PWM_0			0x3042
-MX28_PAD_AUART1_TX__PWM_1			0x3052
-MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
-MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
-MX28_PAD_AUART2_RX__SSP3_D4			0x3082
-MX28_PAD_AUART2_TX__SSP3_D5			0x3092
-MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
-MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
-MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
-MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
-MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
-MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
-MX28_PAD_PWM0__DUART_RX				0x3102
-MX28_PAD_PWM1__DUART_TX				0x3112
-MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
-MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
-MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
-MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
-MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
-MX28_PAD_I2C0_SCL__DUART_RX			0x3182
-MX28_PAD_I2C0_SDA__DUART_TX			0x3192
-MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
-MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
-MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
-MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
-MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
-MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
-MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
-MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
-MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
-MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
-MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
-MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
-MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
-MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
-MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
-MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
-MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
-MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
-MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
-MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
-MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
-MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
-MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
-MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
-MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
-MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
-MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
-MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
-MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
-MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
-MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
-MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
-MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
-MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
-MX28_PAD_LCD_D00__GPIO_1_0			0x1003
-MX28_PAD_LCD_D01__GPIO_1_1			0x1013
-MX28_PAD_LCD_D02__GPIO_1_2			0x1023
-MX28_PAD_LCD_D03__GPIO_1_3			0x1033
-MX28_PAD_LCD_D04__GPIO_1_4			0x1043
-MX28_PAD_LCD_D05__GPIO_1_5			0x1053
-MX28_PAD_LCD_D06__GPIO_1_6			0x1063
-MX28_PAD_LCD_D07__GPIO_1_7			0x1073
-MX28_PAD_LCD_D08__GPIO_1_8			0x1083
-MX28_PAD_LCD_D09__GPIO_1_9			0x1093
-MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
-MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
-MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
-MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
-MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
-MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
-MX28_PAD_LCD_D16__GPIO_1_16			0x1103
-MX28_PAD_LCD_D17__GPIO_1_17			0x1113
-MX28_PAD_LCD_D18__GPIO_1_18			0x1123
-MX28_PAD_LCD_D19__GPIO_1_19			0x1133
-MX28_PAD_LCD_D20__GPIO_1_20			0x1143
-MX28_PAD_LCD_D21__GPIO_1_21			0x1153
-MX28_PAD_LCD_D22__GPIO_1_22			0x1163
-MX28_PAD_LCD_D23__GPIO_1_23			0x1173
-MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
-MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
-MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
-MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
-MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
-MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
-MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
-MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
-MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
-MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
-MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
-MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
-MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
-MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
-MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
-MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
-MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
-MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
-MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
-MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
-MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
-MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
-MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
-MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
-MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
-MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
-MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
-MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
-MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
-MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
-MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
-MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
-MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
-MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
-MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
-MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
-MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
-MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
-MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
-MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
-MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
-MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
-MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
-MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
-MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
-MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
-MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
-MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
-MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
-MX28_PAD_PWM0__GPIO_3_16			0x3103
-MX28_PAD_PWM1__GPIO_3_17			0x3113
-MX28_PAD_PWM2__GPIO_3_18			0x3123
-MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
-MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
-MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
-MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
-MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
-MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
-MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
-MX28_PAD_SPDIF__GPIO_3_27			0x31b3
-MX28_PAD_PWM3__GPIO_3_28			0x31c3
-MX28_PAD_PWM4__GPIO_3_29			0x31d3
-MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
-MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
-MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
-MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
-MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
-MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
-MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
-MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
-MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
-MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
-MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
-MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
-MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
-MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
-MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
-MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
-MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
-MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
-MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
-
-Valid values for i.MX23 pinmux-id:
-
-pinmux						id
-------						--
-MX23_PAD_GPMI_D00__GPMI_D00			0x0000
-MX23_PAD_GPMI_D01__GPMI_D01			0x0010
-MX23_PAD_GPMI_D02__GPMI_D02			0x0020
-MX23_PAD_GPMI_D03__GPMI_D03			0x0030
-MX23_PAD_GPMI_D04__GPMI_D04			0x0040
-MX23_PAD_GPMI_D05__GPMI_D05			0x0050
-MX23_PAD_GPMI_D06__GPMI_D06			0x0060
-MX23_PAD_GPMI_D07__GPMI_D07			0x0070
-MX23_PAD_GPMI_D08__GPMI_D08			0x0080
-MX23_PAD_GPMI_D09__GPMI_D09			0x0090
-MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
-MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
-MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
-MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
-MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
-MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
-MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
-MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
-MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
-MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
-MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
-MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
-MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
-MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
-MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
-MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
-MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
-MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
-MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
-MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
-MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
-MX23_PAD_LCD_D00__LCD_D00			0x1000
-MX23_PAD_LCD_D01__LCD_D01			0x1010
-MX23_PAD_LCD_D02__LCD_D02			0x1020
-MX23_PAD_LCD_D03__LCD_D03			0x1030
-MX23_PAD_LCD_D04__LCD_D04			0x1040
-MX23_PAD_LCD_D05__LCD_D05			0x1050
-MX23_PAD_LCD_D06__LCD_D06			0x1060
-MX23_PAD_LCD_D07__LCD_D07			0x1070
-MX23_PAD_LCD_D08__LCD_D08			0x1080
-MX23_PAD_LCD_D09__LCD_D09			0x1090
-MX23_PAD_LCD_D10__LCD_D10			0x10a0
-MX23_PAD_LCD_D11__LCD_D11			0x10b0
-MX23_PAD_LCD_D12__LCD_D12			0x10c0
-MX23_PAD_LCD_D13__LCD_D13			0x10d0
-MX23_PAD_LCD_D14__LCD_D14			0x10e0
-MX23_PAD_LCD_D15__LCD_D15			0x10f0
-MX23_PAD_LCD_D16__LCD_D16			0x1100
-MX23_PAD_LCD_D17__LCD_D17			0x1110
-MX23_PAD_LCD_RESET__LCD_RESET			0x1120
-MX23_PAD_LCD_RS__LCD_RS				0x1130
-MX23_PAD_LCD_WR__LCD_WR				0x1140
-MX23_PAD_LCD_CS__LCD_CS				0x1150
-MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
-MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
-MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
-MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
-MX23_PAD_PWM0__PWM0				0x11a0
-MX23_PAD_PWM1__PWM1				0x11b0
-MX23_PAD_PWM2__PWM2				0x11c0
-MX23_PAD_PWM3__PWM3				0x11d0
-MX23_PAD_PWM4__PWM4				0x11e0
-MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
-MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
-MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
-MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
-MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
-MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
-MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
-MX23_PAD_ROTARYA__ROTARYA			0x2070
-MX23_PAD_ROTARYB__ROTARYB			0x2080
-MX23_PAD_EMI_A00__EMI_A00			0x2090
-MX23_PAD_EMI_A01__EMI_A01			0x20a0
-MX23_PAD_EMI_A02__EMI_A02			0x20b0
-MX23_PAD_EMI_A03__EMI_A03			0x20c0
-MX23_PAD_EMI_A04__EMI_A04			0x20d0
-MX23_PAD_EMI_A05__EMI_A05			0x20e0
-MX23_PAD_EMI_A06__EMI_A06			0x20f0
-MX23_PAD_EMI_A07__EMI_A07			0x2100
-MX23_PAD_EMI_A08__EMI_A08			0x2110
-MX23_PAD_EMI_A09__EMI_A09			0x2120
-MX23_PAD_EMI_A10__EMI_A10			0x2130
-MX23_PAD_EMI_A11__EMI_A11			0x2140
-MX23_PAD_EMI_A12__EMI_A12			0x2150
-MX23_PAD_EMI_BA0__EMI_BA0			0x2160
-MX23_PAD_EMI_BA1__EMI_BA1			0x2170
-MX23_PAD_EMI_CASN__EMI_CASN			0x2180
-MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
-MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
-MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
-MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
-MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
-MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
-MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
-MX23_PAD_EMI_D00__EMI_D00			0x3000
-MX23_PAD_EMI_D01__EMI_D01			0x3010
-MX23_PAD_EMI_D02__EMI_D02			0x3020
-MX23_PAD_EMI_D03__EMI_D03			0x3030
-MX23_PAD_EMI_D04__EMI_D04			0x3040
-MX23_PAD_EMI_D05__EMI_D05			0x3050
-MX23_PAD_EMI_D06__EMI_D06			0x3060
-MX23_PAD_EMI_D07__EMI_D07			0x3070
-MX23_PAD_EMI_D08__EMI_D08			0x3080
-MX23_PAD_EMI_D09__EMI_D09			0x3090
-MX23_PAD_EMI_D10__EMI_D10			0x30a0
-MX23_PAD_EMI_D11__EMI_D11			0x30b0
-MX23_PAD_EMI_D12__EMI_D12			0x30c0
-MX23_PAD_EMI_D13__EMI_D13			0x30d0
-MX23_PAD_EMI_D14__EMI_D14			0x30e0
-MX23_PAD_EMI_D15__EMI_D15			0x30f0
-MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
-MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
-MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
-MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
-MX23_PAD_EMI_CLK__EMI_CLK			0x3140
-MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
-MX23_PAD_GPMI_D00__LCD_D8			0x0001
-MX23_PAD_GPMI_D01__LCD_D9			0x0011
-MX23_PAD_GPMI_D02__LCD_D10			0x0021
-MX23_PAD_GPMI_D03__LCD_D11			0x0031
-MX23_PAD_GPMI_D04__LCD_D12			0x0041
-MX23_PAD_GPMI_D05__LCD_D13			0x0051
-MX23_PAD_GPMI_D06__LCD_D14			0x0061
-MX23_PAD_GPMI_D07__LCD_D15			0x0071
-MX23_PAD_GPMI_D08__LCD_D18			0x0081
-MX23_PAD_GPMI_D09__LCD_D19			0x0091
-MX23_PAD_GPMI_D10__LCD_D20			0x00a1
-MX23_PAD_GPMI_D11__LCD_D21			0x00b1
-MX23_PAD_GPMI_D12__LCD_D22			0x00c1
-MX23_PAD_GPMI_D13__LCD_D23			0x00d1
-MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
-MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
-MX23_PAD_GPMI_CLE__LCD_D16			0x0101
-MX23_PAD_GPMI_ALE__LCD_D17			0x0111
-MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
-MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
-MX23_PAD_AUART1_RX__IR_RX			0x01c1
-MX23_PAD_AUART1_TX__IR_TX			0x01d1
-MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
-MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
-MX23_PAD_LCD_D00__ETM_DA8			0x1001
-MX23_PAD_LCD_D01__ETM_DA9			0x1011
-MX23_PAD_LCD_D02__ETM_DA10			0x1021
-MX23_PAD_LCD_D03__ETM_DA11			0x1031
-MX23_PAD_LCD_D04__ETM_DA12			0x1041
-MX23_PAD_LCD_D05__ETM_DA13			0x1051
-MX23_PAD_LCD_D06__ETM_DA14			0x1061
-MX23_PAD_LCD_D07__ETM_DA15			0x1071
-MX23_PAD_LCD_D08__ETM_DA0			0x1081
-MX23_PAD_LCD_D09__ETM_DA1			0x1091
-MX23_PAD_LCD_D10__ETM_DA2			0x10a1
-MX23_PAD_LCD_D11__ETM_DA3			0x10b1
-MX23_PAD_LCD_D12__ETM_DA4			0x10c1
-MX23_PAD_LCD_D13__ETM_DA5			0x10d1
-MX23_PAD_LCD_D14__ETM_DA6			0x10e1
-MX23_PAD_LCD_D15__ETM_DA7			0x10f1
-MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
-MX23_PAD_LCD_RS__ETM_TCLK			0x1131
-MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
-MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
-MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
-MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
-MX23_PAD_PWM0__ROTARYA				0x11a1
-MX23_PAD_PWM1__ROTARYB				0x11b1
-MX23_PAD_PWM2__GPMI_RDY3			0x11c1
-MX23_PAD_PWM3__ETM_TCTL				0x11d1
-MX23_PAD_PWM4__ETM_TCLK				0x11e1
-MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
-MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
-MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
-MX23_PAD_ROTARYA__AUART2_RTS			0x2071
-MX23_PAD_ROTARYB__AUART2_CTS			0x2081
-MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
-MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
-MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
-MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
-MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
-MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
-MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
-MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
-MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
-MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
-MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
-MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
-MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
-MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
-MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
-MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
-MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
-MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
-MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
-MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
-MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
-MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
-MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
-MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
-MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
-MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
-MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
-MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
-MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
-MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
-MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
-MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
-MX23_PAD_PWM0__DUART_RX				0x11a2
-MX23_PAD_PWM1__DUART_TX				0x11b2
-MX23_PAD_PWM3__AUART1_CTS			0x11d2
-MX23_PAD_PWM4__AUART1_RTS			0x11e2
-MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
-MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
-MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
-MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
-MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
-MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
-MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
-MX23_PAD_ROTARYA__SPDIF				0x2072
-MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
-MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
-MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
-MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
-MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
-MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
-MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
-MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
-MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
-MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
-MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
-MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
-MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
-MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
-MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
-MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
-MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
-MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
-MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
-MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
-MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
-MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
-MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
-MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
-MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
-MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
-MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
-MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
-MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
-MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
-MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
-MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
-MX23_PAD_LCD_D00__GPIO_1_0			0x1003
-MX23_PAD_LCD_D01__GPIO_1_1			0x1013
-MX23_PAD_LCD_D02__GPIO_1_2			0x1023
-MX23_PAD_LCD_D03__GPIO_1_3			0x1033
-MX23_PAD_LCD_D04__GPIO_1_4			0x1043
-MX23_PAD_LCD_D05__GPIO_1_5			0x1053
-MX23_PAD_LCD_D06__GPIO_1_6			0x1063
-MX23_PAD_LCD_D07__GPIO_1_7			0x1073
-MX23_PAD_LCD_D08__GPIO_1_8			0x1083
-MX23_PAD_LCD_D09__GPIO_1_9			0x1093
-MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
-MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
-MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
-MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
-MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
-MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
-MX23_PAD_LCD_D16__GPIO_1_16			0x1103
-MX23_PAD_LCD_D17__GPIO_1_17			0x1113
-MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
-MX23_PAD_LCD_RS__GPIO_1_19			0x1133
-MX23_PAD_LCD_WR__GPIO_1_20			0x1143
-MX23_PAD_LCD_CS__GPIO_1_21			0x1153
-MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
-MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
-MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
-MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
-MX23_PAD_PWM0__GPIO_1_26			0x11a3
-MX23_PAD_PWM1__GPIO_1_27			0x11b3
-MX23_PAD_PWM2__GPIO_1_28			0x11c3
-MX23_PAD_PWM3__GPIO_1_29			0x11d3
-MX23_PAD_PWM4__GPIO_1_30			0x11e3
-MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
-MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
-MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
-MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
-MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
-MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
-MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
-MX23_PAD_ROTARYA__GPIO_2_7			0x2073
-MX23_PAD_ROTARYB__GPIO_2_8			0x2083
-MX23_PAD_EMI_A00__GPIO_2_9			0x2093
-MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
-MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
-MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
-MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
-MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
-MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
-MX23_PAD_EMI_A07__GPIO_2_16			0x2103
-MX23_PAD_EMI_A08__GPIO_2_17			0x2113
-MX23_PAD_EMI_A09__GPIO_2_18			0x2123
-MX23_PAD_EMI_A10__GPIO_2_19			0x2133
-MX23_PAD_EMI_A11__GPIO_2_20			0x2143
-MX23_PAD_EMI_A12__GPIO_2_21			0x2153
-MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
-MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
-MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
-MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
-MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
-MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
-MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
-MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
-MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
-MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+Valid values for i.MX28/i.MX23 pinmux-id are defined in
+arch/arm/boot/dts/imx28-pinfunc.h and arch/arm/boot/dts/imx23-pinfunc.h.
+The definitions for the padconfig properties can be found in
+arch/arm/boot/dts/mxs-pinfunc.h.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index 5a02e30..7069a0b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -72,6 +72,13 @@
 		/* pin base, nr pins & gpio function */
 		pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
 
+- interrupt-controller : standard interrupt controller binding if using
+  interrupts for wake-up events for example. In this case pinctrl-single
+  is set up as a chained interrupt controller and the wake-up interrupts
+  can be requested by the drivers using request_irq().
+
+- #interrupt-cells : standard interrupt binding if using interrupts
+
 This driver assumes that there is only one register for each pin (unless the
 pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
 specified in the pinctrl-bindings.txt document in this directory.
@@ -121,6 +128,8 @@
 	reg = <0x4a100040 0x0196>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	#interrupt-cells = <1>;
+	interrupt-controller;
 	pinctrl-single,register-width = <16>;
 	pinctrl-single,function-mask = <0xffff>;
 };
@@ -131,6 +140,8 @@
 	reg = <0x4a31e040 0x0038>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	#interrupt-cells = <1>;
+	interrupt-controller;
 	pinctrl-single,register-width = <16>;
 	pinctrl-single,function-mask = <0xffff>;
 };
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
index 4688205..ee05dc3 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
@@ -1,7 +1,8 @@
 * Freescale i.MX28 LRADC device driver
 
 Required properties:
-- compatible: Should be "fsl,imx28-lradc"
+- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
+              for i.MX28 SoC
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the LRADC interrupts
 
@@ -9,13 +10,38 @@
 - fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
                                to LRADC. Valid value is either 4 or 5. If this
                                property is not present, then the touchscreen is
-                               disabled.
+                               disabled. 5 wires is valid for i.MX28 SoC only.
+- fsl,ave-ctrl: number of samples per direction to calculate an average value.
+                Allowed value is 1 ... 31, default is 4
+- fsl,ave-delay: delay between consecutive samples. Allowed value is
+                 1 ... 2047. It is used if 'fsl,ave-ctrl' > 1, counts at
+                 2 kHz and its default is 2 (= 1 ms)
+- fsl,settling: delay between plate switch to next sample. Allowed value is
+                1 ... 2047. It counts at 2 kHz and its default is
+                10 (= 5 ms)
 
-Examples:
+Example for i.MX23 SoC:
+
+	lradc@80050000 {
+		compatible = "fsl,imx23-lradc";
+		reg = <0x80050000 0x2000>;
+		interrupts = <36 37 38 39 40 41 42 43 44>;
+		status = "okay";
+		fsl,lradc-touchscreen-wires = <4>;
+		fsl,ave-ctrl = <4>;
+		fsl,ave-delay = <2>;
+		fsl,settling = <10>;
+	};
+
+Example for i.MX28 SoC:
 
 	lradc@80050000 {
 		compatible = "fsl,imx28-lradc";
 		reg = <0x80050000 0x2000>;
-		interrupts = <10 14 15 16 17 18 19
-				20 21 22 23 24 25>;
+		interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
+		status = "okay";
+		fsl,lradc-touchscreen-wires = <5>;
+		fsl,ave-ctrl = <4>;
+		fsl,ave-delay = <2>;
+		fsl,settling = <10>;
 	};
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
new file mode 100644
index 0000000..5ea26c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -0,0 +1,17 @@
+MSM SoC HSUSB controllers
+
+EHCI
+
+Required properties:
+- compatible:	Should contain "qcom,ehci-host"
+- regs:			offset and length of the register set in the memory map
+- usb-phy:		phandle for the PHY device
+
+Example EHCI controller device node:
+
+	ehci: ehci@f9a55000 {
+		compatible = "qcom,ehci-host";
+		reg = <0xf9a55000 0x400>;
+		usb-phy = <&usb_otg>;
+	};
+
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 9088ab0..090e5e2 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -3,9 +3,6 @@
 OMAP MUSB GLUE
  - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb"
  - ti,hwmods : must be "usb_otg_hs"
- - ti,has-mailbox : to specify that omap uses an external mailbox
-   (in control module) to communicate with the musb core during device connect
-   and disconnect.
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
  - num-eps : Specifies the number of endpoints. This is also a
@@ -19,6 +16,9 @@
  - power : Should be "50". This signifies the controller can supply up to
    100mA when operating in host mode.
  - usb-phy : the phandle for the PHY device
+ - phys : the phandle for the PHY device (used by generic PHY framework)
+ - phy-names : the names of the PHY corresponding to the PHYs present in the
+   *phy* phandle.
 
 Optional properties:
  - ctrl-module : phandle of the control module this glue uses to write to
@@ -28,11 +28,12 @@
 usb_otg_hs: usb_otg_hs@4a0ab000 {
 	compatible = "ti,omap4-musb";
 	ti,hwmods = "usb_otg_hs";
-	ti,has-mailbox;
 	multipoint = <1>;
 	num-eps = <16>;
 	ram-bits = <12>;
 	ctrl-module = <&omap_control_usb>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
 };
 
 Board specific device node entry
@@ -78,22 +79,22 @@
 OMAP CONTROL USB
 
 Required properties:
- - compatible: Should be "ti,omap-control-usb"
+ - compatible: Should be one of
+ "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
+ "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
+			e.g. USB2_PHY on OMAP5.
+ "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
+			e.g. USB3 PHY and SATA PHY on OMAP5.
+ "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
+			DRA7 platform.
  - reg : Address and length of the register set for the device. It contains
-   the address of "control_dev_conf" and "otghs_control" or "phy_power_usb"
-   depending upon omap4 or omap5.
- - reg-names: The names of the register addresses corresponding to the registers
-   filled in "reg".
- - ti,type: This is used to differentiate whether the control module has
-   usb mailbox or usb3 phy power. omap4 has usb mailbox in control module to
-   notify events to the musb core and omap5 has usb3 phy power register to
-   power on usb3 phy. Should be "1" if it has mailbox and "2" if it has usb3
-   phy power.
+   the address of "otghs_control" for control-phy-otghs or "power" register
+   for other types.
+ - reg-names: should be "otghs_control" control-phy-otghs and "power" for
+   other types.
 
 omap_control_usb: omap-control-usb@4a002300 {
-	compatible = "ti,omap-control-usb";
-	reg = <0x4a002300 0x4>,
-	      <0x4a00233c 0x4>;
-	reg-names = "control_dev_conf", "otghs_control";
-	ti,type = <1>;
+	compatible = "ti,control-phy-otghs";
+	reg = <0x4a00233c 0x4>;
+	reg-names = "otghs_control";
 };
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index d7e2726..1bd37fa 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -15,7 +15,7 @@
 
 - vcc-supply: phandle to the regulator that provides RESET to the PHY.
 
-- reset-supply: phandle to the regulator that provides power to the PHY.
+- reset-gpios: Should specify the GPIO for reset.
 
 Example:
 
@@ -25,10 +25,9 @@
 		clocks = <&osc 0>;
 		clock-names = "main_clk";
 		vcc-supply = <&hsusb1_vcc_regulator>;
-		reset-supply = <&hsusb1_reset_regulator>;
+		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 	};
 
 hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
 and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
-hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
-controls RESET.
+hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
index 61496f5..c0245c8 100644
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
@@ -5,6 +5,8 @@
 Required properties:
  - compatible: Should be "ti,omap-usb2"
  - reg : Address and length of the register set for the device.
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
 
 Optional properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
@@ -16,6 +18,7 @@
 	compatible = "ti,omap-usb2";
 	reg = <0x4a0ad080 0x58>;
 	ctrl-module = <&omap_control_usb>;
+	#phy-cells = <0>;
 };
 
 OMAP USB3 PHY
@@ -25,6 +28,8 @@
  - reg : Address and length of the register set for the device.
  - reg-names: The names of the register addresses corresponding to the registers
    filled in "reg".
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
 
 Optional properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
@@ -39,4 +44,5 @@
 	      <0x4a084c00 0x40>;
 	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 	ctrl-module = <&omap_control_usb>;
+	#phy-cells = <0>;
 };
diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt
index 330d6ec..439a41c 100644
--- a/Documentation/devicetree/bindings/usb/ux500-usb.txt
+++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt
@@ -15,7 +15,7 @@
 Example:
 
 usb_per5@a03e0000 {
-	compatible = "stericsson,db8500-musb", "mentor,musb";
+	compatible = "stericsson,db8500-musb";
 	reg = <0xa03e0000 0x10000>;
 	interrupts = <0 23 0x4>;
 	interrupt-names = "mc";
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2956800..04eab45 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -15,6 +15,7 @@
 avago	Avago Technologies
 bosch	Bosch Sensortec GmbH
 brcm	Broadcom Corporation
+capella	Capella Microsystems, Inc
 cavium	Cavium, Inc.
 chrp	Common Hardware Reference Platform
 cirrus	Cirrus Logic, Inc.
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..3289d76 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -6,10 +6,10 @@
 	-dptx-phy node(defined inside dp-controller node)
 
 For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
+Required properties for dptx-phy: deprecated, use phys and phy-names
+	-reg: deprecated
 		Base address of DP PHY register.
-	-samsung,enable-mask:
+	-samsung,enable-mask: deprecated
 		The bit-mask used to enable/disable DP PHY.
 
 For the Panel initialization, we read data from dp-controller node.
@@ -27,6 +27,10 @@
 		from common clock binding: Shall be "dp".
 	-interrupt-parent:
 		phandle to Interrupt combiner node.
+	-phys:
+		from general PHY binding: the phandle for the PHY device.
+	-phy-names:
+		from general PHY binding: Should be "dp".
 	-samsung,color-space:
 		input video data format.
 			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
@@ -68,11 +72,8 @@
 		clocks = <&clock 342>;
 		clock-names = "dp";
 
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
+		phys = <&dp_phy>;
+		phy-names = "dp";
 	};
 
 Board Specific portion:
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index 323983b..50decf8 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -12,7 +12,19 @@
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
 	c) optional flags and pull up/down.
-
+- clocks: list of clock IDs from SoC clock driver.
+	a) hdmi: Gate of HDMI IP bus clock.
+	b) sclk_hdmi: Gate of HDMI special clock.
+	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
+		HDMI clock mux.
+	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
+		HDMI clock mux.
+	e) mout_hdmi: It is required by the driver to switch between the 2
+		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+		after configuration, parent is set to sclk_hdmiphy else
+		sclk_pixel.
+- clock-names: aliases as per driver requirements for above clock IDs:
+	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
 Example:
 
 	hdmi {
diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
index 3334b0a..7bfde9c 100644
--- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
+++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
@@ -10,6 +10,10 @@
 - reg: physical base address of the mixer and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
+- clocks: list of clock IDs from SoC clock driver.
+	a) mixer: Gate of Mixer IP bus clock.
+	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
+               mixer mux.
 
 Example:
 
diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class
index eb0fa5f..5377f63 100644
--- a/Documentation/extcon/porting-android-switch-class
+++ b/Documentation/extcon/porting-android-switch-class
@@ -25,8 +25,10 @@
     @print_state: no change but type change (switch_dev->extcon_dev)
 
 - switch_dev_register(sdev, dev)
-	=> extcon_dev_register(edev, dev)
-	: no change but type change (sdev->edev)
+	=> extcon_dev_register(edev)
+	: type change (sdev->edev)
+	: remove second param('dev'). if edev has parent device, should store
+	  'dev' to 'edev.dev.parent' before registering extcon device
 - switch_dev_unregister(sdev)
 	=> extcon_dev_unregister(edev)
 	: no change but type change (sdev->edev)
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 11a0a40..aed6b94 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -29,15 +29,16 @@
 	 (6) Index registration
 	 (7) Data file registration
 	 (8) Miscellaneous object registration
-	 (9) Setting the data file size
+ 	 (9) Setting the data file size
 	(10) Page alloc/read/write
 	(11) Page uncaching
 	(12) Index and data file consistency
-	(13) Miscellaneous cookie operations
-	(14) Cookie unregistration
-	(15) Index invalidation
-	(16) Data file invalidation
-	(17) FS-Cache specific page flags.
+	(13) Cookie enablement
+	(14) Miscellaneous cookie operations
+	(15) Cookie unregistration
+	(16) Index invalidation
+	(17) Data file invalidation
+	(18) FS-Cache specific page flags.
 
 
 =============================
@@ -334,7 +335,8 @@
 	struct fscache_cookie *
 	fscache_acquire_cookie(struct fscache_cookie *parent,
 			       const struct fscache_object_def *def,
-			       void *netfs_data);
+			       void *netfs_data,
+			       bool enable);
 
 This function creates an index entry in the index represented by parent,
 filling in the index entry by calling the operations pointed to by def.
@@ -350,6 +352,10 @@
 may be created in several different caches independently at different times.
 This is all handled transparently, and the netfs doesn't see any of it.
 
+A cookie will be created in the disabled state if enabled is false.  A cookie
+must be enabled to do anything with it.  A disabled cookie can be enabled by
+calling fscache_enable_cookie() (see below).
+
 For example, with AFS, a cell would be added to the primary index.  This index
 entry would have a dependent inode containing a volume location index for the
 volume mappings within this cell:
@@ -357,7 +363,7 @@
 	cell->cache =
 		fscache_acquire_cookie(afs_cache_netfs.primary_index,
 				       &afs_cell_cache_index_def,
-				       cell);
+				       cell, true);
 
 Then when a volume location was accessed, it would be entered into the cell's
 index and an inode would be allocated that acts as a volume type and hash chain
@@ -366,7 +372,7 @@
 	vlocation->cache =
 		fscache_acquire_cookie(cell->cache,
 				       &afs_vlocation_cache_index_def,
-				       vlocation);
+				       vlocation, true);
 
 And then a particular flavour of volume (R/O for example) could be added to
 that index, creating another index for vnodes (AFS inode equivalents):
@@ -374,7 +380,7 @@
 	volume->cache =
 		fscache_acquire_cookie(vlocation->cache,
 				       &afs_volume_cache_index_def,
-				       volume);
+				       volume, true);
 
 
 ======================
@@ -388,7 +394,7 @@
 	vnode->cache =
 		fscache_acquire_cookie(volume->cache,
 				       &afs_vnode_cache_object_def,
-				       vnode);
+				       vnode, true);
 
 
 =================================
@@ -404,7 +410,7 @@
 	xattr->cache =
 		fscache_acquire_cookie(vnode->cache,
 				       &afs_xattr_cache_object_def,
-				       xattr);
+				       xattr, true);
 
 Miscellaneous objects might be used to store extended attributes or directory
 entries for example.
@@ -733,6 +739,47 @@
 data blocks are added to a data file object.
 
 
+=================
+COOKIE ENABLEMENT
+=================
+
+Cookies exist in one of two states: enabled and disabled.  If a cookie is
+disabled, it ignores all attempts to acquire child cookies; check, update or
+invalidate its state; allocate, read or write backing pages - though it is
+still possible to uncache pages and relinquish the cookie.
+
+The initial enablement state is set by fscache_acquire_cookie(), but the cookie
+can be enabled or disabled later.  To disable a cookie, call:
+    
+	void fscache_disable_cookie(struct fscache_cookie *cookie,
+    				    bool invalidate);
+    
+If the cookie is not already disabled, this locks the cookie against other
+enable and disable ops, marks the cookie as being disabled, discards or
+invalidates any backing objects and waits for cessation of activity on any
+associated object before unlocking the cookie.
+
+All possible failures are handled internally.  The caller should consider
+calling fscache_uncache_all_inode_pages() afterwards to make sure all page
+markings are cleared up.
+    
+Cookies can be enabled or reenabled with:
+    
+    	void fscache_enable_cookie(struct fscache_cookie *cookie,
+    				   bool (*can_enable)(void *data),
+    				   void *data)
+    
+If the cookie is not already enabled, this locks the cookie against other
+enable and disable ops, invokes can_enable() and, if the cookie is not an index
+cookie, will begin the procedure of acquiring backing objects.
+
+The optional can_enable() function is passed the data argument and returns a
+ruling as to whether or not enablement should actually be permitted to begin.
+
+All possible failures are handled internally.  The cookie will only be marked
+as enabled if provisional backing objects are allocated.
+
+
 ===============================
 MISCELLANEOUS COOKIE OPERATIONS
 ===============================
@@ -778,7 +825,7 @@
 To get rid of a cookie, this function should be called.
 
 	void fscache_relinquish_cookie(struct fscache_cookie *cookie,
-				       int retire);
+				       bool retire);
 
 If retire is non-zero, then the object will be marked for recycling, and all
 copies of it will be removed from all active caches in which it is present.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fcbb736..203f4a9 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2599,7 +2599,7 @@
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/blockdev/ramdisk.txt.
 
-	rcu_nocbs=	[KNL,BOOT]
+	rcu_nocbs=	[KNL]
 			In kernels built with CONFIG_RCU_NOCB_CPU=y, set
 			the specified list of CPUs to be no-callback CPUs.
 			Invocation of these CPUs' RCU callbacks will
@@ -2612,7 +2612,7 @@
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocb_poll	[KNL,BOOT]
+	rcu_nocb_poll	[KNL]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,
@@ -2623,126 +2623,145 @@
 			energy efficiency by requiring that the kthreads
 			periodically wake up to do the polling.
 
-	rcutree.blimit=	[KNL,BOOT]
+	rcutree.blimit=	[KNL]
 			Set maximum number of finished RCU callbacks to process
 			in one batch.
 
-	rcutree.fanout_leaf=	[KNL,BOOT]
+	rcutree.rcu_fanout_leaf= [KNL]
 			Increase the number of CPUs assigned to each
 			leaf rcu_node structure.  Useful for very large
 			systems.
 
-	rcutree.jiffies_till_first_fqs= [KNL,BOOT]
+	rcutree.jiffies_till_first_fqs= [KNL]
 			Set delay from grace-period initialization to
 			first attempt to force quiescent states.
 			Units are jiffies, minimum value is zero,
 			and maximum value is HZ.
 
-	rcutree.jiffies_till_next_fqs= [KNL,BOOT]
+	rcutree.jiffies_till_next_fqs= [KNL]
 			Set delay between subsequent attempts to force
 			quiescent states.  Units are jiffies, minimum
 			value is one, and maximum value is HZ.
 
-	rcutree.qhimark=	[KNL,BOOT]
+	rcutree.qhimark= [KNL]
 			Set threshold of queued
 			RCU callbacks over which batch limiting is disabled.
 
-	rcutree.qlowmark=	[KNL,BOOT]
+	rcutree.qlowmark= [KNL]
 			Set threshold of queued RCU callbacks below which
 			batch limiting is re-enabled.
 
-	rcutree.rcu_cpu_stall_suppress=	[KNL,BOOT]
-			Suppress RCU CPU stall warning messages.
-
-	rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
-			Set timeout for RCU CPU stall warning messages.
-
-	rcutree.rcu_idle_gp_delay=	[KNL,BOOT]
+	rcutree.rcu_idle_gp_delay= [KNL]
 			Set wakeup interval for idle CPUs that have
 			RCU callbacks (RCU_FAST_NO_HZ=y).
 
-	rcutree.rcu_idle_lazy_gp_delay=	[KNL,BOOT]
+	rcutree.rcu_idle_lazy_gp_delay= [KNL]
 			Set wakeup interval for idle CPUs that have
 			only "lazy" RCU callbacks (RCU_FAST_NO_HZ=y).
 			Lazy RCU callbacks are those which RCU can
 			prove do nothing more than free memory.
 
-	rcutorture.fqs_duration= [KNL,BOOT]
+	rcutorture.fqs_duration= [KNL]
 			Set duration of force_quiescent_state bursts.
 
-	rcutorture.fqs_holdoff= [KNL,BOOT]
+	rcutorture.fqs_holdoff= [KNL]
 			Set holdoff time within force_quiescent_state bursts.
 
-	rcutorture.fqs_stutter= [KNL,BOOT]
+	rcutorture.fqs_stutter= [KNL]
 			Set wait time between force_quiescent_state bursts.
 
-	rcutorture.irqreader= [KNL,BOOT]
-			Test RCU readers from irq handlers.
+	rcutorture.gp_exp= [KNL]
+			Use expedited update-side primitives.
 
-	rcutorture.n_barrier_cbs= [KNL,BOOT]
+	rcutorture.gp_normal= [KNL]
+			Use normal (non-expedited) update-side primitives.
+			If both gp_exp and gp_normal are set, do both.
+			If neither gp_exp nor gp_normal are set, still
+			do both.
+
+	rcutorture.n_barrier_cbs= [KNL]
 			Set callbacks/threads for rcu_barrier() testing.
 
-	rcutorture.nfakewriters= [KNL,BOOT]
+	rcutorture.nfakewriters= [KNL]
 			Set number of concurrent RCU writers.  These just
 			stress RCU, they don't participate in the actual
 			test, hence the "fake".
 
-	rcutorture.nreaders= [KNL,BOOT]
+	rcutorture.nreaders= [KNL]
 			Set number of RCU readers.
 
-	rcutorture.onoff_holdoff= [KNL,BOOT]
+	rcutorture.object_debug= [KNL]
+			Enable debug-object double-call_rcu() testing.
+
+	rcutorture.onoff_holdoff= [KNL]
 			Set time (s) after boot for CPU-hotplug testing.
 
-	rcutorture.onoff_interval= [KNL,BOOT]
+	rcutorture.onoff_interval= [KNL]
 			Set time (s) between CPU-hotplug operations, or
 			zero to disable CPU-hotplug testing.
 
-	rcutorture.shuffle_interval= [KNL,BOOT]
+	rcutorture.rcutorture_runnable= [BOOT]
+			Start rcutorture running at boot time.
+
+	rcutorture.shuffle_interval= [KNL]
 			Set task-shuffle interval (s).  Shuffling tasks
 			allows some CPUs to go into dyntick-idle mode
 			during the rcutorture test.
 
-	rcutorture.shutdown_secs= [KNL,BOOT]
+	rcutorture.shutdown_secs= [KNL]
 			Set time (s) after boot system shutdown.  This
 			is useful for hands-off automated testing.
 
-	rcutorture.stall_cpu= [KNL,BOOT]
+	rcutorture.stall_cpu= [KNL]
 			Duration of CPU stall (s) to test RCU CPU stall
 			warnings, zero to disable.
 
-	rcutorture.stall_cpu_holdoff= [KNL,BOOT]
+	rcutorture.stall_cpu_holdoff= [KNL]
 			Time to wait (s) after boot before inducing stall.
 
-	rcutorture.stat_interval= [KNL,BOOT]
+	rcutorture.stat_interval= [KNL]
 			Time (s) between statistics printk()s.
 
-	rcutorture.stutter= [KNL,BOOT]
+	rcutorture.stutter= [KNL]
 			Time (s) to stutter testing, for example, specifying
 			five seconds causes the test to run for five seconds,
 			wait for five seconds, and so on.  This tests RCU's
 			ability to transition abruptly to and from idle.
 
-	rcutorture.test_boost= [KNL,BOOT]
+	rcutorture.test_boost= [KNL]
 			Test RCU priority boosting?  0=no, 1=maybe, 2=yes.
 			"Maybe" means test if the RCU implementation
 			under test support RCU priority boosting.
 
-	rcutorture.test_boost_duration= [KNL,BOOT]
+	rcutorture.test_boost_duration= [KNL]
 			Duration (s) of each individual boost test.
 
-	rcutorture.test_boost_interval= [KNL,BOOT]
+	rcutorture.test_boost_interval= [KNL]
 			Interval (s) between each boost test.
 
-	rcutorture.test_no_idle_hz= [KNL,BOOT]
+	rcutorture.test_no_idle_hz= [KNL]
 			Test RCU's dyntick-idle handling.  See also the
 			rcutorture.shuffle_interval parameter.
 
-	rcutorture.torture_type= [KNL,BOOT]
+	rcutorture.torture_type= [KNL]
 			Specify the RCU implementation to test.
 
-	rcutorture.verbose= [KNL,BOOT]
+	rcutorture.verbose= [KNL]
 			Enable additional printk() statements.
 
+	rcupdate.rcu_expedited= [KNL]
+			Use expedited grace-period primitives, for
+			example, synchronize_rcu_expedited() instead
+			of synchronize_rcu().  This reduces latency,
+			but can increase CPU utilization, degrade
+			real-time latency, and degrade energy efficiency.
+
+	rcupdate.rcu_cpu_stall_suppress= [KNL]
+			Suppress RCU CPU stall warning messages.
+
+	rcupdate.rcu_cpu_stall_timeout= [KNL]
+			Set timeout for RCU CPU stall warning messages.
+
 	rdinit=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /init from the ramdisk,
diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt
index 32351bf..827104f 100644
--- a/Documentation/kernel-per-CPU-kthreads.txt
+++ b/Documentation/kernel-per-CPU-kthreads.txt
@@ -181,12 +181,17 @@
 		make sure that this is safe on your particular system.
 	d.	It is not possible to entirely get rid of OS jitter
 		from vmstat_update() on CONFIG_SMP=y systems, but you
-		can decrease its frequency by writing a large value to
-		/proc/sys/vm/stat_interval.  The default value is HZ,
-		for an interval of one second.  Of course, larger values
-		will make your virtual-memory statistics update more
-		slowly.  Of course, you can also run your workload at
-		a real-time priority, thus preempting vmstat_update().
+		can decrease its frequency by writing a large value
+		to /proc/sys/vm/stat_interval.	The default value is
+		HZ, for an interval of one second.  Of course, larger
+		values will make your virtual-memory statistics update
+		more slowly.  Of course, you can also run your workload
+		at a real-time priority, thus preempting vmstat_update(),
+		but if your workload is CPU-bound, this is a bad idea.
+		However, there is an RFC patch from Christoph Lameter
+		(based on an earlier one from Gilad Ben-Yossef) that
+		reduces or even eliminates vmstat overhead for some
+		workloads at https://lkml.org/lkml/2013/9/4/379.
 	e.	If running on high-end powerpc servers, build with
 		CONFIG_PPC_RTAS_DAEMON=n.  This prevents the RTAS
 		daemon from running on each CPU every second or so.
diff --git a/Documentation/mic/mic_overview.txt b/Documentation/mic/mic_overview.txt
new file mode 100644
index 0000000..b419292
--- /dev/null
+++ b/Documentation/mic/mic_overview.txt
@@ -0,0 +1,51 @@
+An Intel MIC X100 device is a PCIe form factor add-in coprocessor
+card based on the Intel Many Integrated Core (MIC) architecture
+that runs a Linux OS. It is a PCIe endpoint in a platform and therefore
+implements the three required standard address spaces i.e. configuration,
+memory and I/O. The host OS loads a device driver as is typical for
+PCIe devices. The card itself runs a bootstrap after reset that
+transfers control to the card OS downloaded from the host driver. The
+host driver supports OSPM suspend and resume operations. It shuts down
+the card during suspend and reboots the card OS during resume.
+The card OS as shipped by Intel is a Linux kernel with modifications
+for the X100 devices.
+
+Since it is a PCIe card, it does not have the ability to host hardware
+devices for networking, storage and console. We provide these devices
+on X100 coprocessors thus enabling a self-bootable equivalent environment
+for applications. A key benefit of our solution is that it leverages
+the standard virtio framework for network, disk and console devices,
+though in our case the virtio framework is used across a PCIe bus.
+
+Here is a block diagram of the various components described above. The
+virtio backends are situated on the host rather than the card given better
+single threaded performance for the host compared to MIC, the ability of
+the host to initiate DMA's to/from the card using the MIC DMA engine and
+the fact that the virtio block storage backend can only be on the host.
+
+                              |
+       +----------+           |             +----------+
+       | Card OS  |           |             | Host OS  |
+       +----------+           |             +----------+
+                              |
++-------+ +--------+ +------+ | +---------+  +--------+ +--------+
+| Virtio| |Virtio  | |Virtio| | |Virtio   |  |Virtio  | |Virtio  |
+| Net   | |Console | |Block | | |Net      |  |Console | |Block   |
+| Driver| |Driver  | |Driver| | |backend  |  |backend | |backend |
++-------+ +--------+ +------+ | +---------+  +--------+ +--------+
+    |         |         |     |      |            |         |
+    |         |         |     |User  |            |         |
+    |         |         |     |------|------------|---------|-------
+    +-------------------+     |Kernel +--------------------------+
+              |               |       | Virtio over PCIe IOCTLs  |
+              |               |       +--------------------------+
+      +--------------+        |                   |
+      |Intel MIC     |        |            +---------------+
+      |Card Driver   |        |            |Intel MIC      |
+      +--------------+        |            |Host Driver    |
+              |               |            +---------------+
+              |               |                   |
+     +-------------------------------------------------------------+
+     |                                                             |
+     |                    PCIe Bus                                 |
+     +-------------------------------------------------------------+
diff --git a/Documentation/mic/mpssd/.gitignore b/Documentation/mic/mpssd/.gitignore
new file mode 100644
index 0000000..8b7c72f
--- /dev/null
+++ b/Documentation/mic/mpssd/.gitignore
@@ -0,0 +1 @@
+mpssd
diff --git a/Documentation/mic/mpssd/Makefile b/Documentation/mic/mpssd/Makefile
new file mode 100644
index 0000000..eb860a7
--- /dev/null
+++ b/Documentation/mic/mpssd/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile - Intel MIC User Space Tools.
+# Copyright(c) 2013, Intel Corporation.
+#
+ifdef DEBUG
+CFLAGS += $(USERWARNFLAGS) -I. -g -Wall -DDEBUG=$(DEBUG)
+else
+CFLAGS += $(USERWARNFLAGS) -I. -g -Wall
+endif
+
+mpssd: mpssd.o sysfs.o
+	$(CC) $(CFLAGS) -o $@ $^ -lpthread
+
+install:
+	install mpssd /usr/sbin/mpssd
+	install micctrl /usr/sbin/micctrl
+
+clean:
+	rm -f mpssd *.o
diff --git a/Documentation/mic/mpssd/micctrl b/Documentation/mic/mpssd/micctrl
new file mode 100755
index 0000000..8f2629b
--- /dev/null
+++ b/Documentation/mic/mpssd/micctrl
@@ -0,0 +1,173 @@
+#!/bin/bash
+# Intel MIC Platform Software Stack (MPSS)
+#
+# Copyright(c) 2013 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2, as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Intel MIC User Space Tools.
+#
+# micctrl - Controls MIC boot/start/stop.
+#
+# chkconfig: 2345 95 05
+# description: start MPSS stack processing.
+#
+### BEGIN INIT INFO
+# Provides: micctrl
+### END INIT INFO
+
+# Source function library.
+. /etc/init.d/functions
+
+sysfs="/sys/class/mic"
+
+_status()
+{
+	f=$sysfs/$1
+	echo -e $1 state: "`cat $f/state`" shutdown_status: "`cat $f/shutdown_status`"
+}
+
+status()
+{
+	if [ "`echo $1 | head -c3`" == "mic" ]; then
+		_status $1
+		return $?
+	fi
+	for f in $sysfs/*
+	do
+		_status `basename $f`
+		RETVAL=$?
+		[ $RETVAL -ne 0 ] && return $RETVAL
+	done
+	return 0
+}
+
+_reset()
+{
+	f=$sysfs/$1
+	echo reset > $f/state
+}
+
+reset()
+{
+	if [ "`echo $1 | head -c3`" == "mic" ]; then
+		_reset $1
+		return $?
+	fi
+	for f in $sysfs/*
+	do
+		_reset `basename $f`
+		RETVAL=$?
+		[ $RETVAL -ne 0 ] && return $RETVAL
+	done
+	return 0
+}
+
+_boot()
+{
+	f=$sysfs/$1
+	echo "linux" > $f/bootmode
+	echo "mic/uos.img" > $f/firmware
+	echo "mic/$1.image" > $f/ramdisk
+	echo "boot" > $f/state
+}
+
+boot()
+{
+	if [ "`echo $1 | head -c3`" == "mic" ]; then
+		_boot $1
+		return $?
+	fi
+	for f in $sysfs/*
+	do
+		_boot `basename $f`
+		RETVAL=$?
+		[ $RETVAL -ne 0 ] && return $RETVAL
+	done
+	return 0
+}
+
+_shutdown()
+{
+	f=$sysfs/$1
+	echo shutdown > $f/state
+}
+
+shutdown()
+{
+	if [ "`echo $1 | head -c3`" == "mic" ]; then
+		_shutdown $1
+		return $?
+	fi
+	for f in $sysfs/*
+	do
+		_shutdown `basename $f`
+		RETVAL=$?
+		[ $RETVAL -ne 0 ] && return $RETVAL
+	done
+	return 0
+}
+
+_wait()
+{
+	f=$sysfs/$1
+	while [ "`cat $f/state`" != "offline" -a "`cat $f/state`" != "online" ]
+	do
+		sleep 1
+		echo -e "Waiting for $1 to go offline"
+	done
+}
+
+wait()
+{
+	if [ "`echo $1 | head -c3`" == "mic" ]; then
+		_wait $1
+		return $?
+	fi
+	# Wait for the cards to go offline
+	for f in $sysfs/*
+	do
+		_wait `basename $f`
+		RETVAL=$?
+		[ $RETVAL -ne 0 ] && return $RETVAL
+	done
+	return 0
+}
+
+if [ ! -d "$sysfs" ]; then
+	echo -e $"Module unloaded "
+	exit 3
+fi
+
+case $1 in
+	-s)
+		status $2
+		;;
+	-r)
+		reset $2
+		;;
+	-b)
+		boot $2
+		;;
+	-S)
+		shutdown $2
+		;;
+	-w)
+		wait $2
+		;;
+	*)
+		echo $"Usage: $0 {-s (status) |-r (reset) |-b (boot) |-S (shutdown) |-w (wait)}"
+		exit 2
+esac
+
+exit $?
diff --git a/Documentation/mic/mpssd/mpss b/Documentation/mic/mpssd/mpss
new file mode 100755
index 0000000..3136c68
--- /dev/null
+++ b/Documentation/mic/mpssd/mpss
@@ -0,0 +1,202 @@
+#!/bin/bash
+# Intel MIC Platform Software Stack (MPSS)
+#
+# Copyright(c) 2013 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License, version 2, as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Intel MIC User Space Tools.
+#
+# mpss	Start mpssd.
+#
+# chkconfig: 2345 95 05
+# description: start MPSS stack processing.
+#
+### BEGIN INIT INFO
+# Provides: mpss
+# Required-Start:
+# Required-Stop:
+# Short-Description: MPSS stack control
+# Description: MPSS stack control
+### END INIT INFO
+
+# Source function library.
+. /etc/init.d/functions
+
+exec=/usr/sbin/mpssd
+sysfs="/sys/class/mic"
+
+start()
+{
+	[ -x $exec ] || exit 5
+
+	if [ "`ps -e | awk '{print $4}' | grep mpssd | head -1`" = "mpssd" ]; then
+		echo -e $"MPSSD already running! "
+		success
+		echo
+		return 0
+	fi
+
+	echo -e $"Starting MPSS Stack"
+	echo -e $"Loading MIC_HOST Module"
+
+	# Ensure the driver is loaded
+	if [ ! -d "$sysfs" ]; then
+		modprobe mic_host
+		RETVAL=$?
+		if [ $RETVAL -ne 0 ]; then
+			failure
+			echo
+			return $RETVAL
+		fi
+	fi
+
+	# Start the daemon
+	echo -n $"Starting MPSSD "
+	$exec
+	RETVAL=$?
+	if [ $RETVAL -ne 0 ]; then
+		failure
+		echo
+		return $RETVAL
+	fi
+	success
+	echo
+
+	sleep 5
+
+	# Boot the cards
+	micctrl -b
+
+	# Wait till ping works
+	for f in $sysfs/*
+	do
+		count=100
+		ipaddr=`cat $f/cmdline`
+		ipaddr=${ipaddr#*address,}
+		ipaddr=`echo $ipaddr | cut -d, -f1 | cut -d\; -f1`
+		while [ $count -ge 0 ]
+		do
+			echo -e "Pinging "`basename $f`" "
+			ping -c 1 $ipaddr &> /dev/null
+			RETVAL=$?
+			if [ $RETVAL -eq 0 ]; then
+				success
+				break
+			fi
+			sleep 1
+			count=`expr $count - 1`
+		done
+		[ $RETVAL -ne 0 ] && failure || success
+		echo
+	done
+	return $RETVAL
+}
+
+stop()
+{
+	echo -e $"Shutting down MPSS Stack: "
+
+	# Bail out if module is unloaded
+	if [ ! -d "$sysfs" ]; then
+		echo -n $"Module unloaded "
+		success
+		echo
+		return 0
+	fi
+
+	# Shut down the cards.
+	micctrl -S
+
+	# Wait for the cards to go offline
+	for f in $sysfs/*
+	do
+		while [ "`cat $f/state`" != "offline" ]
+		do
+			sleep 1
+			echo -e "Waiting for "`basename $f`" to go offline"
+		done
+	done
+
+	# Display the status of the cards
+	micctrl -s
+
+	# Kill MPSSD now
+	echo -n $"Killing MPSSD"
+	killall -9 mpssd 2>/dev/null
+	RETVAL=$?
+	[ $RETVAL -ne 0 ] && failure || success
+	echo
+	return $RETVAL
+}
+
+restart()
+{
+	stop
+	sleep 5
+	start
+}
+
+status()
+{
+	micctrl -s
+	if [ "`ps -e | awk '{print $4}' | grep mpssd | head -n 1`" = "mpssd" ]; then
+		echo "mpssd is running"
+	else
+		echo "mpssd is stopped"
+	fi
+	return 0
+}
+
+unload()
+{
+	if [ ! -d "$sysfs" ]; then
+		echo -n $"No MIC_HOST Module: "
+		success
+		echo
+		return
+	fi
+
+	stop
+
+	sleep 5
+	echo -n $"Removing MIC_HOST Module: "
+	modprobe -r mic_host
+	RETVAL=$?
+	[ $RETVAL -ne 0 ] && failure || success
+	echo
+	return $RETVAL
+}
+
+case $1 in
+	start)
+		start
+		;;
+	stop)
+		stop
+		;;
+	restart)
+		restart
+		;;
+	status)
+		status
+		;;
+	unload)
+		unload
+		;;
+	*)
+		echo $"Usage: $0 {start|stop|restart|status|unload}"
+		exit 2
+esac
+
+exit $?
diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c
new file mode 100644
index 0000000..0c980ad
--- /dev/null
+++ b/Documentation/mic/mpssd/mpssd.c
@@ -0,0 +1,1721 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC User Space Tools.
+ */
+
+#define _GNU_SOURCE
+
+#include <stdlib.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <assert.h>
+#include <unistd.h>
+#include <stdbool.h>
+#include <signal.h>
+#include <poll.h>
+#include <features.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <linux/virtio_ring.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_console.h>
+#include <linux/virtio_blk.h>
+#include <linux/version.h>
+#include "mpssd.h"
+#include <linux/mic_ioctl.h>
+#include <linux/mic_common.h>
+
+static void init_mic(struct mic_info *mic);
+
+static FILE *logfp;
+static struct mic_info mic_list;
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#define min_t(type, x, y) ({				\
+		type __min1 = (x);                      \
+		type __min2 = (y);                      \
+		__min1 < __min2 ? __min1 : __min2; })
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_DOWN(addr, size)  ((addr)&(~((size)-1)))
+#define _ALIGN_UP(addr, size)    _ALIGN_DOWN(addr + size - 1, size)
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr, size)     _ALIGN_UP(addr, size)
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)        _ALIGN(addr, PAGE_SIZE)
+
+#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
+
+#define GSO_ENABLED		1
+#define MAX_GSO_SIZE		(64 * 1024)
+#define ETH_H_LEN		14
+#define MAX_NET_PKT_SIZE	(_ALIGN_UP(MAX_GSO_SIZE + ETH_H_LEN, 64))
+#define MIC_DEVICE_PAGE_END	0x1000
+
+#ifndef VIRTIO_NET_HDR_F_DATA_VALID
+#define VIRTIO_NET_HDR_F_DATA_VALID	2	/* Csum is valid */
+#endif
+
+static struct {
+	struct mic_device_desc dd;
+	struct mic_vqconfig vqconfig[2];
+	__u32 host_features, guest_acknowledgements;
+	struct virtio_console_config cons_config;
+} virtcons_dev_page = {
+	.dd = {
+		.type = VIRTIO_ID_CONSOLE,
+		.num_vq = ARRAY_SIZE(virtcons_dev_page.vqconfig),
+		.feature_len = sizeof(virtcons_dev_page.host_features),
+		.config_len = sizeof(virtcons_dev_page.cons_config),
+	},
+	.vqconfig[0] = {
+		.num = htole16(MIC_VRING_ENTRIES),
+	},
+	.vqconfig[1] = {
+		.num = htole16(MIC_VRING_ENTRIES),
+	},
+};
+
+static struct {
+	struct mic_device_desc dd;
+	struct mic_vqconfig vqconfig[2];
+	__u32 host_features, guest_acknowledgements;
+	struct virtio_net_config net_config;
+} virtnet_dev_page = {
+	.dd = {
+		.type = VIRTIO_ID_NET,
+		.num_vq = ARRAY_SIZE(virtnet_dev_page.vqconfig),
+		.feature_len = sizeof(virtnet_dev_page.host_features),
+		.config_len = sizeof(virtnet_dev_page.net_config),
+	},
+	.vqconfig[0] = {
+		.num = htole16(MIC_VRING_ENTRIES),
+	},
+	.vqconfig[1] = {
+		.num = htole16(MIC_VRING_ENTRIES),
+	},
+#if GSO_ENABLED
+		.host_features = htole32(
+		1 << VIRTIO_NET_F_CSUM |
+		1 << VIRTIO_NET_F_GSO |
+		1 << VIRTIO_NET_F_GUEST_TSO4 |
+		1 << VIRTIO_NET_F_GUEST_TSO6 |
+		1 << VIRTIO_NET_F_GUEST_ECN |
+		1 << VIRTIO_NET_F_GUEST_UFO),
+#else
+		.host_features = 0,
+#endif
+};
+
+static const char *mic_config_dir = "/etc/sysconfig/mic";
+static const char *virtblk_backend = "VIRTBLK_BACKEND";
+static struct {
+	struct mic_device_desc dd;
+	struct mic_vqconfig vqconfig[1];
+	__u32 host_features, guest_acknowledgements;
+	struct virtio_blk_config blk_config;
+} virtblk_dev_page = {
+	.dd = {
+		.type = VIRTIO_ID_BLOCK,
+		.num_vq = ARRAY_SIZE(virtblk_dev_page.vqconfig),
+		.feature_len = sizeof(virtblk_dev_page.host_features),
+		.config_len = sizeof(virtblk_dev_page.blk_config),
+	},
+	.vqconfig[0] = {
+		.num = htole16(MIC_VRING_ENTRIES),
+	},
+	.host_features =
+		htole32(1<<VIRTIO_BLK_F_SEG_MAX),
+	.blk_config = {
+		.seg_max = htole32(MIC_VRING_ENTRIES - 2),
+		.capacity = htole64(0),
+	 }
+};
+
+static char *myname;
+
+static int
+tap_configure(struct mic_info *mic, char *dev)
+{
+	pid_t pid;
+	char *ifargv[7];
+	char ipaddr[IFNAMSIZ];
+	int ret = 0;
+
+	pid = fork();
+	if (pid == 0) {
+		ifargv[0] = "ip";
+		ifargv[1] = "link";
+		ifargv[2] = "set";
+		ifargv[3] = dev;
+		ifargv[4] = "up";
+		ifargv[5] = NULL;
+		mpsslog("Configuring %s\n", dev);
+		ret = execvp("ip", ifargv);
+		if (ret < 0) {
+			mpsslog("%s execvp failed errno %s\n",
+				mic->name, strerror(errno));
+			return ret;
+		}
+	}
+	if (pid < 0) {
+		mpsslog("%s fork failed errno %s\n",
+			mic->name, strerror(errno));
+		return ret;
+	}
+
+	ret = waitpid(pid, NULL, 0);
+	if (ret < 0) {
+		mpsslog("%s waitpid failed errno %s\n",
+			mic->name, strerror(errno));
+		return ret;
+	}
+
+	snprintf(ipaddr, IFNAMSIZ, "172.31.%d.254/24", mic->id);
+
+	pid = fork();
+	if (pid == 0) {
+		ifargv[0] = "ip";
+		ifargv[1] = "addr";
+		ifargv[2] = "add";
+		ifargv[3] = ipaddr;
+		ifargv[4] = "dev";
+		ifargv[5] = dev;
+		ifargv[6] = NULL;
+		mpsslog("Configuring %s ipaddr %s\n", dev, ipaddr);
+		ret = execvp("ip", ifargv);
+		if (ret < 0) {
+			mpsslog("%s execvp failed errno %s\n",
+				mic->name, strerror(errno));
+			return ret;
+		}
+	}
+	if (pid < 0) {
+		mpsslog("%s fork failed errno %s\n",
+			mic->name, strerror(errno));
+		return ret;
+	}
+
+	ret = waitpid(pid, NULL, 0);
+	if (ret < 0) {
+		mpsslog("%s waitpid failed errno %s\n",
+			mic->name, strerror(errno));
+		return ret;
+	}
+	mpsslog("MIC name %s %s %d DONE!\n",
+		mic->name, __func__, __LINE__);
+	return 0;
+}
+
+static int tun_alloc(struct mic_info *mic, char *dev)
+{
+	struct ifreq ifr;
+	int fd, err;
+#if GSO_ENABLED
+	unsigned offload;
+#endif
+	fd = open("/dev/net/tun", O_RDWR);
+	if (fd < 0) {
+		mpsslog("Could not open /dev/net/tun %s\n", strerror(errno));
+		goto done;
+	}
+
+	memset(&ifr, 0, sizeof(ifr));
+
+	ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
+	if (*dev)
+		strncpy(ifr.ifr_name, dev, IFNAMSIZ);
+
+	err = ioctl(fd, TUNSETIFF, (void *)&ifr);
+	if (err < 0) {
+		mpsslog("%s %s %d TUNSETIFF failed %s\n",
+			mic->name, __func__, __LINE__, strerror(errno));
+		close(fd);
+		return err;
+	}
+#if GSO_ENABLED
+	offload = TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
+		TUN_F_TSO_ECN | TUN_F_UFO;
+
+	err = ioctl(fd, TUNSETOFFLOAD, offload);
+	if (err < 0) {
+		mpsslog("%s %s %d TUNSETOFFLOAD failed %s\n",
+			mic->name, __func__, __LINE__, strerror(errno));
+		close(fd);
+		return err;
+	}
+#endif
+	strcpy(dev, ifr.ifr_name);
+	mpsslog("Created TAP %s\n", dev);
+done:
+	return fd;
+}
+
+#define NET_FD_VIRTIO_NET 0
+#define NET_FD_TUN 1
+#define MAX_NET_FD 2
+
+static void set_dp(struct mic_info *mic, int type, void *dp)
+{
+	switch (type) {
+	case VIRTIO_ID_CONSOLE:
+		mic->mic_console.console_dp = dp;
+		return;
+	case VIRTIO_ID_NET:
+		mic->mic_net.net_dp = dp;
+		return;
+	case VIRTIO_ID_BLOCK:
+		mic->mic_virtblk.block_dp = dp;
+		return;
+	}
+	mpsslog("%s %s %d not found\n", mic->name, __func__, type);
+	assert(0);
+}
+
+static void *get_dp(struct mic_info *mic, int type)
+{
+	switch (type) {
+	case VIRTIO_ID_CONSOLE:
+		return mic->mic_console.console_dp;
+	case VIRTIO_ID_NET:
+		return mic->mic_net.net_dp;
+	case VIRTIO_ID_BLOCK:
+		return mic->mic_virtblk.block_dp;
+	}
+	mpsslog("%s %s %d not found\n", mic->name, __func__, type);
+	assert(0);
+	return NULL;
+}
+
+static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
+{
+	struct mic_device_desc *d;
+	int i;
+	void *dp = get_dp(mic, type);
+
+	for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+		i += mic_total_desc_size(d)) {
+		d = dp + i;
+
+		/* End of list */
+		if (d->type == 0)
+			break;
+
+		if (d->type == -1)
+			continue;
+
+		mpsslog("%s %s d-> type %d d %p\n",
+			mic->name, __func__, d->type, d);
+
+		if (d->type == (__u8)type)
+			return d;
+	}
+	mpsslog("%s %s %d not found\n", mic->name, __func__, type);
+	assert(0);
+	return NULL;
+}
+
+/* See comments in vhost.c for explanation of next_desc() */
+static unsigned next_desc(struct vring_desc *desc)
+{
+	unsigned int next;
+
+	if (!(le16toh(desc->flags) & VRING_DESC_F_NEXT))
+		return -1U;
+	next = le16toh(desc->next);
+	return next;
+}
+
+/* Sum up all the IOVEC length */
+static ssize_t
+sum_iovec_len(struct mic_copy_desc *copy)
+{
+	ssize_t sum = 0;
+	int i;
+
+	for (i = 0; i < copy->iovcnt; i++)
+		sum += copy->iov[i].iov_len;
+	return sum;
+}
+
+static inline void verify_out_len(struct mic_info *mic,
+	struct mic_copy_desc *copy)
+{
+	if (copy->out_len != sum_iovec_len(copy)) {
+		mpsslog("%s %s %d BUG copy->out_len 0x%x len 0x%zx\n",
+			mic->name, __func__, __LINE__,
+			copy->out_len, sum_iovec_len(copy));
+		assert(copy->out_len == sum_iovec_len(copy));
+	}
+}
+
+/* Display an iovec */
+static void
+disp_iovec(struct mic_info *mic, struct mic_copy_desc *copy,
+	   const char *s, int line)
+{
+	int i;
+
+	for (i = 0; i < copy->iovcnt; i++)
+		mpsslog("%s %s %d copy->iov[%d] addr %p len 0x%zx\n",
+			mic->name, s, line, i,
+			copy->iov[i].iov_base, copy->iov[i].iov_len);
+}
+
+static inline __u16 read_avail_idx(struct mic_vring *vr)
+{
+	return ACCESS_ONCE(vr->info->avail_idx);
+}
+
+static inline void txrx_prepare(int type, bool tx, struct mic_vring *vr,
+				struct mic_copy_desc *copy, ssize_t len)
+{
+	copy->vr_idx = tx ? 0 : 1;
+	copy->update_used = true;
+	if (type == VIRTIO_ID_NET)
+		copy->iov[1].iov_len = len - sizeof(struct virtio_net_hdr);
+	else
+		copy->iov[0].iov_len = len;
+}
+
+/* Central API which triggers the copies */
+static int
+mic_virtio_copy(struct mic_info *mic, int fd,
+		struct mic_vring *vr, struct mic_copy_desc *copy)
+{
+	int ret;
+
+	ret = ioctl(fd, MIC_VIRTIO_COPY_DESC, copy);
+	if (ret) {
+		mpsslog("%s %s %d errno %s ret %d\n",
+			mic->name, __func__, __LINE__,
+			strerror(errno), ret);
+	}
+	return ret;
+}
+
+/*
+ * This initialization routine requires at least one
+ * vring i.e. vr0. vr1 is optional.
+ */
+static void *
+init_vr(struct mic_info *mic, int fd, int type,
+	struct mic_vring *vr0, struct mic_vring *vr1, int num_vq)
+{
+	int vr_size;
+	char *va;
+
+	vr_size = PAGE_ALIGN(vring_size(MIC_VRING_ENTRIES,
+		MIC_VIRTIO_RING_ALIGN) + sizeof(struct _mic_vring_info));
+	va = mmap(NULL, MIC_DEVICE_PAGE_END + vr_size * num_vq,
+		PROT_READ, MAP_SHARED, fd, 0);
+	if (MAP_FAILED == va) {
+		mpsslog("%s %s %d mmap failed errno %s\n",
+			mic->name, __func__, __LINE__,
+			strerror(errno));
+		goto done;
+	}
+	set_dp(mic, type, va);
+	vr0->va = (struct mic_vring *)&va[MIC_DEVICE_PAGE_END];
+	vr0->info = vr0->va +
+		vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN);
+	vring_init(&vr0->vr,
+		   MIC_VRING_ENTRIES, vr0->va, MIC_VIRTIO_RING_ALIGN);
+	mpsslog("%s %s vr0 %p vr0->info %p vr_size 0x%x vring 0x%x ",
+		__func__, mic->name, vr0->va, vr0->info, vr_size,
+		vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
+	mpsslog("magic 0x%x expected 0x%x\n",
+		vr0->info->magic, MIC_MAGIC + type);
+	assert(vr0->info->magic == MIC_MAGIC + type);
+	if (vr1) {
+		vr1->va = (struct mic_vring *)
+			&va[MIC_DEVICE_PAGE_END + vr_size];
+		vr1->info = vr1->va + vring_size(MIC_VRING_ENTRIES,
+			MIC_VIRTIO_RING_ALIGN);
+		vring_init(&vr1->vr,
+			   MIC_VRING_ENTRIES, vr1->va, MIC_VIRTIO_RING_ALIGN);
+		mpsslog("%s %s vr1 %p vr1->info %p vr_size 0x%x vring 0x%x ",
+			__func__, mic->name, vr1->va, vr1->info, vr_size,
+			vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
+		mpsslog("magic 0x%x expected 0x%x\n",
+			vr1->info->magic, MIC_MAGIC + type + 1);
+		assert(vr1->info->magic == MIC_MAGIC + type + 1);
+	}
+done:
+	return va;
+}
+
+static void
+wait_for_card_driver(struct mic_info *mic, int fd, int type)
+{
+	struct pollfd pollfd;
+	int err;
+	struct mic_device_desc *desc = get_device_desc(mic, type);
+
+	pollfd.fd = fd;
+	mpsslog("%s %s Waiting .... desc-> type %d status 0x%x\n",
+		mic->name, __func__, type, desc->status);
+	while (1) {
+		pollfd.events = POLLIN;
+		pollfd.revents = 0;
+		err = poll(&pollfd, 1, -1);
+		if (err < 0) {
+			mpsslog("%s %s poll failed %s\n",
+				mic->name, __func__, strerror(errno));
+			continue;
+		}
+
+		if (pollfd.revents) {
+			mpsslog("%s %s Waiting... desc-> type %d status 0x%x\n",
+				mic->name, __func__, type, desc->status);
+			if (desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
+				mpsslog("%s %s poll.revents %d\n",
+					mic->name, __func__, pollfd.revents);
+				mpsslog("%s %s desc-> type %d status 0x%x\n",
+					mic->name, __func__, type,
+					desc->status);
+				break;
+			}
+		}
+	}
+}
+
+/* Spin till we have some descriptors */
+static void
+spin_for_descriptors(struct mic_info *mic, struct mic_vring *vr)
+{
+	__u16 avail_idx = read_avail_idx(vr);
+
+	while (avail_idx == le16toh(ACCESS_ONCE(vr->vr.avail->idx))) {
+#ifdef DEBUG
+		mpsslog("%s %s waiting for desc avail %d info_avail %d\n",
+			mic->name, __func__,
+			le16toh(vr->vr.avail->idx), vr->info->avail_idx);
+#endif
+		sched_yield();
+	}
+}
+
+static void *
+virtio_net(void *arg)
+{
+	static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
+	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+	struct iovec vnet_iov[2][2] = {
+		{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
+		  { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
+		{ { .iov_base = vnet_hdr[1], .iov_len = sizeof(vnet_hdr[1]) },
+		  { .iov_base = vnet_buf[1], .iov_len = sizeof(vnet_buf[1]) } },
+	};
+	struct iovec *iov0 = vnet_iov[0], *iov1 = vnet_iov[1];
+	struct mic_info *mic = (struct mic_info *)arg;
+	char if_name[IFNAMSIZ];
+	struct pollfd net_poll[MAX_NET_FD];
+	struct mic_vring tx_vr, rx_vr;
+	struct mic_copy_desc copy;
+	struct mic_device_desc *desc;
+	int err;
+
+	snprintf(if_name, IFNAMSIZ, "mic%d", mic->id);
+	mic->mic_net.tap_fd = tun_alloc(mic, if_name);
+	if (mic->mic_net.tap_fd < 0)
+		goto done;
+
+	if (tap_configure(mic, if_name))
+		goto done;
+	mpsslog("MIC name %s id %d\n", mic->name, mic->id);
+
+	net_poll[NET_FD_VIRTIO_NET].fd = mic->mic_net.virtio_net_fd;
+	net_poll[NET_FD_VIRTIO_NET].events = POLLIN;
+	net_poll[NET_FD_TUN].fd = mic->mic_net.tap_fd;
+	net_poll[NET_FD_TUN].events = POLLIN;
+
+	if (MAP_FAILED == init_vr(mic, mic->mic_net.virtio_net_fd,
+				  VIRTIO_ID_NET, &tx_vr, &rx_vr,
+		virtnet_dev_page.dd.num_vq)) {
+		mpsslog("%s init_vr failed %s\n",
+			mic->name, strerror(errno));
+		goto done;
+	}
+
+	copy.iovcnt = 2;
+	desc = get_device_desc(mic, VIRTIO_ID_NET);
+
+	while (1) {
+		ssize_t len;
+
+		net_poll[NET_FD_VIRTIO_NET].revents = 0;
+		net_poll[NET_FD_TUN].revents = 0;
+
+		/* Start polling for data from tap and virtio net */
+		err = poll(net_poll, 2, -1);
+		if (err < 0) {
+			mpsslog("%s poll failed %s\n",
+				__func__, strerror(errno));
+			continue;
+		}
+		if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK))
+			wait_for_card_driver(mic, mic->mic_net.virtio_net_fd,
+					     VIRTIO_ID_NET);
+		/*
+		 * Check if there is data to be read from TUN and write to
+		 * virtio net fd if there is.
+		 */
+		if (net_poll[NET_FD_TUN].revents & POLLIN) {
+			copy.iov = iov0;
+			len = readv(net_poll[NET_FD_TUN].fd,
+				copy.iov, copy.iovcnt);
+			if (len > 0) {
+				struct virtio_net_hdr *hdr
+					= (struct virtio_net_hdr *)vnet_hdr[0];
+
+				/* Disable checksums on the card since we are on
+				   a reliable PCIe link */
+				hdr->flags |= VIRTIO_NET_HDR_F_DATA_VALID;
+#ifdef DEBUG
+				mpsslog("%s %s %d hdr->flags 0x%x ", mic->name,
+					__func__, __LINE__, hdr->flags);
+				mpsslog("copy.out_len %d hdr->gso_type 0x%x\n",
+					copy.out_len, hdr->gso_type);
+#endif
+#ifdef DEBUG
+				disp_iovec(mic, copy, __func__, __LINE__);
+				mpsslog("%s %s %d read from tap 0x%lx\n",
+					mic->name, __func__, __LINE__,
+					len);
+#endif
+				spin_for_descriptors(mic, &tx_vr);
+				txrx_prepare(VIRTIO_ID_NET, 1, &tx_vr, &copy,
+					     len);
+
+				err = mic_virtio_copy(mic,
+					mic->mic_net.virtio_net_fd, &tx_vr,
+					&copy);
+				if (err < 0) {
+					mpsslog("%s %s %d mic_virtio_copy %s\n",
+						mic->name, __func__, __LINE__,
+						strerror(errno));
+				}
+				if (!err)
+					verify_out_len(mic, &copy);
+#ifdef DEBUG
+				disp_iovec(mic, copy, __func__, __LINE__);
+				mpsslog("%s %s %d wrote to net 0x%lx\n",
+					mic->name, __func__, __LINE__,
+					sum_iovec_len(&copy));
+#endif
+				/* Reinitialize IOV for next run */
+				iov0[1].iov_len = MAX_NET_PKT_SIZE;
+			} else if (len < 0) {
+				disp_iovec(mic, &copy, __func__, __LINE__);
+				mpsslog("%s %s %d read failed %s ", mic->name,
+					__func__, __LINE__, strerror(errno));
+				mpsslog("cnt %d sum %zd\n",
+					copy.iovcnt, sum_iovec_len(&copy));
+			}
+		}
+
+		/*
+		 * Check if there is data to be read from virtio net and
+		 * write to TUN if there is.
+		 */
+		if (net_poll[NET_FD_VIRTIO_NET].revents & POLLIN) {
+			while (rx_vr.info->avail_idx !=
+				le16toh(rx_vr.vr.avail->idx)) {
+				copy.iov = iov1;
+				txrx_prepare(VIRTIO_ID_NET, 0, &rx_vr, &copy,
+					     MAX_NET_PKT_SIZE
+					+ sizeof(struct virtio_net_hdr));
+
+				err = mic_virtio_copy(mic,
+					mic->mic_net.virtio_net_fd, &rx_vr,
+					&copy);
+				if (!err) {
+#ifdef DEBUG
+					struct virtio_net_hdr *hdr
+						= (struct virtio_net_hdr *)
+							vnet_hdr[1];
+
+					mpsslog("%s %s %d hdr->flags 0x%x, ",
+						mic->name, __func__, __LINE__,
+						hdr->flags);
+					mpsslog("out_len %d gso_type 0x%x\n",
+						copy.out_len,
+						hdr->gso_type);
+#endif
+					/* Set the correct output iov_len */
+					iov1[1].iov_len = copy.out_len -
+						sizeof(struct virtio_net_hdr);
+					verify_out_len(mic, &copy);
+#ifdef DEBUG
+					disp_iovec(mic, copy, __func__,
+						   __LINE__);
+					mpsslog("%s %s %d ",
+						mic->name, __func__, __LINE__);
+					mpsslog("read from net 0x%lx\n",
+						sum_iovec_len(copy));
+#endif
+					len = writev(net_poll[NET_FD_TUN].fd,
+						copy.iov, copy.iovcnt);
+					if (len != sum_iovec_len(&copy)) {
+						mpsslog("Tun write failed %s ",
+							strerror(errno));
+						mpsslog("len 0x%zx ", len);
+						mpsslog("read_len 0x%zx\n",
+							sum_iovec_len(&copy));
+					} else {
+#ifdef DEBUG
+						disp_iovec(mic, &copy, __func__,
+							   __LINE__);
+						mpsslog("%s %s %d ",
+							mic->name, __func__,
+							__LINE__);
+						mpsslog("wrote to tap 0x%lx\n",
+							len);
+#endif
+					}
+				} else {
+					mpsslog("%s %s %d mic_virtio_copy %s\n",
+						mic->name, __func__, __LINE__,
+						strerror(errno));
+					break;
+				}
+			}
+		}
+		if (net_poll[NET_FD_VIRTIO_NET].revents & POLLERR)
+			mpsslog("%s: %s: POLLERR\n", __func__, mic->name);
+	}
+done:
+	pthread_exit(NULL);
+}
+
+/* virtio_console */
+#define VIRTIO_CONSOLE_FD 0
+#define MONITOR_FD (VIRTIO_CONSOLE_FD + 1)
+#define MAX_CONSOLE_FD (MONITOR_FD + 1)  /* must be the last one + 1 */
+#define MAX_BUFFER_SIZE PAGE_SIZE
+
+static void *
+virtio_console(void *arg)
+{
+	static __u8 vcons_buf[2][PAGE_SIZE];
+	struct iovec vcons_iov[2] = {
+		{ .iov_base = vcons_buf[0], .iov_len = sizeof(vcons_buf[0]) },
+		{ .iov_base = vcons_buf[1], .iov_len = sizeof(vcons_buf[1]) },
+	};
+	struct iovec *iov0 = &vcons_iov[0], *iov1 = &vcons_iov[1];
+	struct mic_info *mic = (struct mic_info *)arg;
+	int err;
+	struct pollfd console_poll[MAX_CONSOLE_FD];
+	int pty_fd;
+	char *pts_name;
+	ssize_t len;
+	struct mic_vring tx_vr, rx_vr;
+	struct mic_copy_desc copy;
+	struct mic_device_desc *desc;
+
+	pty_fd = posix_openpt(O_RDWR);
+	if (pty_fd < 0) {
+		mpsslog("can't open a pseudoterminal master device: %s\n",
+			strerror(errno));
+		goto _return;
+	}
+	pts_name = ptsname(pty_fd);
+	if (pts_name == NULL) {
+		mpsslog("can't get pts name\n");
+		goto _close_pty;
+	}
+	printf("%s console message goes to %s\n", mic->name, pts_name);
+	mpsslog("%s console message goes to %s\n", mic->name, pts_name);
+	err = grantpt(pty_fd);
+	if (err < 0) {
+		mpsslog("can't grant access: %s %s\n",
+			pts_name, strerror(errno));
+		goto _close_pty;
+	}
+	err = unlockpt(pty_fd);
+	if (err < 0) {
+		mpsslog("can't unlock a pseudoterminal: %s %s\n",
+			pts_name, strerror(errno));
+		goto _close_pty;
+	}
+	console_poll[MONITOR_FD].fd = pty_fd;
+	console_poll[MONITOR_FD].events = POLLIN;
+
+	console_poll[VIRTIO_CONSOLE_FD].fd = mic->mic_console.virtio_console_fd;
+	console_poll[VIRTIO_CONSOLE_FD].events = POLLIN;
+
+	if (MAP_FAILED == init_vr(mic, mic->mic_console.virtio_console_fd,
+				  VIRTIO_ID_CONSOLE, &tx_vr, &rx_vr,
+		virtcons_dev_page.dd.num_vq)) {
+		mpsslog("%s init_vr failed %s\n",
+			mic->name, strerror(errno));
+		goto _close_pty;
+	}
+
+	copy.iovcnt = 1;
+	desc = get_device_desc(mic, VIRTIO_ID_CONSOLE);
+
+	for (;;) {
+		console_poll[MONITOR_FD].revents = 0;
+		console_poll[VIRTIO_CONSOLE_FD].revents = 0;
+		err = poll(console_poll, MAX_CONSOLE_FD, -1);
+		if (err < 0) {
+			mpsslog("%s %d: poll failed: %s\n", __func__, __LINE__,
+				strerror(errno));
+			continue;
+		}
+		if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK))
+			wait_for_card_driver(mic,
+					     mic->mic_console.virtio_console_fd,
+				VIRTIO_ID_CONSOLE);
+
+		if (console_poll[MONITOR_FD].revents & POLLIN) {
+			copy.iov = iov0;
+			len = readv(pty_fd, copy.iov, copy.iovcnt);
+			if (len > 0) {
+#ifdef DEBUG
+				disp_iovec(mic, copy, __func__, __LINE__);
+				mpsslog("%s %s %d read from tap 0x%lx\n",
+					mic->name, __func__, __LINE__,
+					len);
+#endif
+				spin_for_descriptors(mic, &tx_vr);
+				txrx_prepare(VIRTIO_ID_CONSOLE, 1, &tx_vr,
+					     &copy, len);
+
+				err = mic_virtio_copy(mic,
+					mic->mic_console.virtio_console_fd,
+					&tx_vr, &copy);
+				if (err < 0) {
+					mpsslog("%s %s %d mic_virtio_copy %s\n",
+						mic->name, __func__, __LINE__,
+						strerror(errno));
+				}
+				if (!err)
+					verify_out_len(mic, &copy);
+#ifdef DEBUG
+				disp_iovec(mic, copy, __func__, __LINE__);
+				mpsslog("%s %s %d wrote to net 0x%lx\n",
+					mic->name, __func__, __LINE__,
+					sum_iovec_len(copy));
+#endif
+				/* Reinitialize IOV for next run */
+				iov0->iov_len = PAGE_SIZE;
+			} else if (len < 0) {
+				disp_iovec(mic, &copy, __func__, __LINE__);
+				mpsslog("%s %s %d read failed %s ",
+					mic->name, __func__, __LINE__,
+					strerror(errno));
+				mpsslog("cnt %d sum %zd\n",
+					copy.iovcnt, sum_iovec_len(&copy));
+			}
+		}
+
+		if (console_poll[VIRTIO_CONSOLE_FD].revents & POLLIN) {
+			while (rx_vr.info->avail_idx !=
+				le16toh(rx_vr.vr.avail->idx)) {
+				copy.iov = iov1;
+				txrx_prepare(VIRTIO_ID_CONSOLE, 0, &rx_vr,
+					     &copy, PAGE_SIZE);
+
+				err = mic_virtio_copy(mic,
+					mic->mic_console.virtio_console_fd,
+					&rx_vr, &copy);
+				if (!err) {
+					/* Set the correct output iov_len */
+					iov1->iov_len = copy.out_len;
+					verify_out_len(mic, &copy);
+#ifdef DEBUG
+					disp_iovec(mic, copy, __func__,
+						   __LINE__);
+					mpsslog("%s %s %d ",
+						mic->name, __func__, __LINE__);
+					mpsslog("read from net 0x%lx\n",
+						sum_iovec_len(copy));
+#endif
+					len = writev(pty_fd,
+						copy.iov, copy.iovcnt);
+					if (len != sum_iovec_len(&copy)) {
+						mpsslog("Tun write failed %s ",
+							strerror(errno));
+						mpsslog("len 0x%zx ", len);
+						mpsslog("read_len 0x%zx\n",
+							sum_iovec_len(&copy));
+					} else {
+#ifdef DEBUG
+						disp_iovec(mic, copy, __func__,
+							   __LINE__);
+						mpsslog("%s %s %d ",
+							mic->name, __func__,
+							__LINE__);
+						mpsslog("wrote to tap 0x%lx\n",
+							len);
+#endif
+					}
+				} else {
+					mpsslog("%s %s %d mic_virtio_copy %s\n",
+						mic->name, __func__, __LINE__,
+						strerror(errno));
+					break;
+				}
+			}
+		}
+		if (console_poll[NET_FD_VIRTIO_NET].revents & POLLERR)
+			mpsslog("%s: %s: POLLERR\n", __func__, mic->name);
+	}
+_close_pty:
+	close(pty_fd);
+_return:
+	pthread_exit(NULL);
+}
+
+static void
+add_virtio_device(struct mic_info *mic, struct mic_device_desc *dd)
+{
+	char path[PATH_MAX];
+	int fd, err;
+
+	snprintf(path, PATH_MAX, "/dev/mic%d", mic->id);
+	fd = open(path, O_RDWR);
+	if (fd < 0) {
+		mpsslog("Could not open %s %s\n", path, strerror(errno));
+		return;
+	}
+
+	err = ioctl(fd, MIC_VIRTIO_ADD_DEVICE, dd);
+	if (err < 0) {
+		mpsslog("Could not add %d %s\n", dd->type, strerror(errno));
+		close(fd);
+		return;
+	}
+	switch (dd->type) {
+	case VIRTIO_ID_NET:
+		mic->mic_net.virtio_net_fd = fd;
+		mpsslog("Added VIRTIO_ID_NET for %s\n", mic->name);
+		break;
+	case VIRTIO_ID_CONSOLE:
+		mic->mic_console.virtio_console_fd = fd;
+		mpsslog("Added VIRTIO_ID_CONSOLE for %s\n", mic->name);
+		break;
+	case VIRTIO_ID_BLOCK:
+		mic->mic_virtblk.virtio_block_fd = fd;
+		mpsslog("Added VIRTIO_ID_BLOCK for %s\n", mic->name);
+		break;
+	}
+}
+
+static bool
+set_backend_file(struct mic_info *mic)
+{
+	FILE *config;
+	char buff[PATH_MAX], *line, *evv, *p;
+
+	snprintf(buff, PATH_MAX, "%s/mpssd%03d.conf", mic_config_dir, mic->id);
+	config = fopen(buff, "r");
+	if (config == NULL)
+		return false;
+	do {  /* look for "virtblk_backend=XXXX" */
+		line = fgets(buff, PATH_MAX, config);
+		if (line == NULL)
+			break;
+		if (*line == '#')
+			continue;
+		p = strchr(line, '\n');
+		if (p)
+			*p = '\0';
+	} while (strncmp(line, virtblk_backend, strlen(virtblk_backend)) != 0);
+	fclose(config);
+	if (line == NULL)
+		return false;
+	evv = strchr(line, '=');
+	if (evv == NULL)
+		return false;
+	mic->mic_virtblk.backend_file = malloc(strlen(evv) + 1);
+	if (mic->mic_virtblk.backend_file == NULL) {
+		mpsslog("%s %d can't allocate memory\n", mic->name, mic->id);
+		return false;
+	}
+	strcpy(mic->mic_virtblk.backend_file, evv + 1);
+	return true;
+}
+
+#define SECTOR_SIZE 512
+static bool
+set_backend_size(struct mic_info *mic)
+{
+	mic->mic_virtblk.backend_size = lseek(mic->mic_virtblk.backend, 0,
+		SEEK_END);
+	if (mic->mic_virtblk.backend_size < 0) {
+		mpsslog("%s: can't seek: %s\n",
+			mic->name, mic->mic_virtblk.backend_file);
+		return false;
+	}
+	virtblk_dev_page.blk_config.capacity =
+		mic->mic_virtblk.backend_size / SECTOR_SIZE;
+	if ((mic->mic_virtblk.backend_size % SECTOR_SIZE) != 0)
+		virtblk_dev_page.blk_config.capacity++;
+
+	virtblk_dev_page.blk_config.capacity =
+		htole64(virtblk_dev_page.blk_config.capacity);
+
+	return true;
+}
+
+static bool
+open_backend(struct mic_info *mic)
+{
+	if (!set_backend_file(mic))
+		goto _error_exit;
+	mic->mic_virtblk.backend = open(mic->mic_virtblk.backend_file, O_RDWR);
+	if (mic->mic_virtblk.backend < 0) {
+		mpsslog("%s: can't open: %s\n", mic->name,
+			mic->mic_virtblk.backend_file);
+		goto _error_free;
+	}
+	if (!set_backend_size(mic))
+		goto _error_close;
+	mic->mic_virtblk.backend_addr = mmap(NULL,
+		mic->mic_virtblk.backend_size,
+		PROT_READ|PROT_WRITE, MAP_SHARED,
+		mic->mic_virtblk.backend, 0L);
+	if (mic->mic_virtblk.backend_addr == MAP_FAILED) {
+		mpsslog("%s: can't map: %s %s\n",
+			mic->name, mic->mic_virtblk.backend_file,
+			strerror(errno));
+		goto _error_close;
+	}
+	return true;
+
+ _error_close:
+	close(mic->mic_virtblk.backend);
+ _error_free:
+	free(mic->mic_virtblk.backend_file);
+ _error_exit:
+	return false;
+}
+
+static void
+close_backend(struct mic_info *mic)
+{
+	munmap(mic->mic_virtblk.backend_addr, mic->mic_virtblk.backend_size);
+	close(mic->mic_virtblk.backend);
+	free(mic->mic_virtblk.backend_file);
+}
+
+static bool
+start_virtblk(struct mic_info *mic, struct mic_vring *vring)
+{
+	if (((unsigned long)&virtblk_dev_page.blk_config % 8) != 0) {
+		mpsslog("%s: blk_config is not 8 byte aligned.\n",
+			mic->name);
+		return false;
+	}
+	add_virtio_device(mic, &virtblk_dev_page.dd);
+	if (MAP_FAILED == init_vr(mic, mic->mic_virtblk.virtio_block_fd,
+				  VIRTIO_ID_BLOCK, vring, NULL,
+				  virtblk_dev_page.dd.num_vq)) {
+		mpsslog("%s init_vr failed %s\n",
+			mic->name, strerror(errno));
+		return false;
+	}
+	return true;
+}
+
+static void
+stop_virtblk(struct mic_info *mic)
+{
+	int vr_size, ret;
+
+	vr_size = PAGE_ALIGN(vring_size(MIC_VRING_ENTRIES,
+		MIC_VIRTIO_RING_ALIGN) + sizeof(struct _mic_vring_info));
+	ret = munmap(mic->mic_virtblk.block_dp,
+		MIC_DEVICE_PAGE_END + vr_size * virtblk_dev_page.dd.num_vq);
+	if (ret < 0)
+		mpsslog("%s munmap errno %d\n", mic->name, errno);
+	close(mic->mic_virtblk.virtio_block_fd);
+}
+
+static __u8
+header_error_check(struct vring_desc *desc)
+{
+	if (le32toh(desc->len) != sizeof(struct virtio_blk_outhdr)) {
+		mpsslog("%s() %d: length is not sizeof(virtio_blk_outhd)\n",
+			__func__, __LINE__);
+		return -EIO;
+	}
+	if (!(le16toh(desc->flags) & VRING_DESC_F_NEXT)) {
+		mpsslog("%s() %d: alone\n",
+			__func__, __LINE__);
+		return -EIO;
+	}
+	if (le16toh(desc->flags) & VRING_DESC_F_WRITE) {
+		mpsslog("%s() %d: not read\n",
+			__func__, __LINE__);
+		return -EIO;
+	}
+	return 0;
+}
+
+static int
+read_header(int fd, struct virtio_blk_outhdr *hdr, __u32 desc_idx)
+{
+	struct iovec iovec;
+	struct mic_copy_desc copy;
+
+	iovec.iov_len = sizeof(*hdr);
+	iovec.iov_base = hdr;
+	copy.iov = &iovec;
+	copy.iovcnt = 1;
+	copy.vr_idx = 0;  /* only one vring on virtio_block */
+	copy.update_used = false;  /* do not update used index */
+	return ioctl(fd, MIC_VIRTIO_COPY_DESC, &copy);
+}
+
+static int
+transfer_blocks(int fd, struct iovec *iovec, __u32 iovcnt)
+{
+	struct mic_copy_desc copy;
+
+	copy.iov = iovec;
+	copy.iovcnt = iovcnt;
+	copy.vr_idx = 0;  /* only one vring on virtio_block */
+	copy.update_used = false;  /* do not update used index */
+	return ioctl(fd, MIC_VIRTIO_COPY_DESC, &copy);
+}
+
+static __u8
+status_error_check(struct vring_desc *desc)
+{
+	if (le32toh(desc->len) != sizeof(__u8)) {
+		mpsslog("%s() %d: length is not sizeof(status)\n",
+			__func__, __LINE__);
+		return -EIO;
+	}
+	return 0;
+}
+
+static int
+write_status(int fd, __u8 *status)
+{
+	struct iovec iovec;
+	struct mic_copy_desc copy;
+
+	iovec.iov_base = status;
+	iovec.iov_len = sizeof(*status);
+	copy.iov = &iovec;
+	copy.iovcnt = 1;
+	copy.vr_idx = 0;  /* only one vring on virtio_block */
+	copy.update_used = true; /* Update used index */
+	return ioctl(fd, MIC_VIRTIO_COPY_DESC, &copy);
+}
+
+static void *
+virtio_block(void *arg)
+{
+	struct mic_info *mic = (struct mic_info *)arg;
+	int ret;
+	struct pollfd block_poll;
+	struct mic_vring vring;
+	__u16 avail_idx;
+	__u32 desc_idx;
+	struct vring_desc *desc;
+	struct iovec *iovec, *piov;
+	__u8 status;
+	__u32 buffer_desc_idx;
+	struct virtio_blk_outhdr hdr;
+	void *fos;
+
+	for (;;) {  /* forever */
+		if (!open_backend(mic)) { /* No virtblk */
+			for (mic->mic_virtblk.signaled = 0;
+				!mic->mic_virtblk.signaled;)
+				sleep(1);
+			continue;
+		}
+
+		/* backend file is specified. */
+		if (!start_virtblk(mic, &vring))
+			goto _close_backend;
+		iovec = malloc(sizeof(*iovec) *
+			le32toh(virtblk_dev_page.blk_config.seg_max));
+		if (!iovec) {
+			mpsslog("%s: can't alloc iovec: %s\n",
+				mic->name, strerror(ENOMEM));
+			goto _stop_virtblk;
+		}
+
+		block_poll.fd = mic->mic_virtblk.virtio_block_fd;
+		block_poll.events = POLLIN;
+		for (mic->mic_virtblk.signaled = 0;
+		     !mic->mic_virtblk.signaled;) {
+			block_poll.revents = 0;
+					/* timeout in 1 sec to see signaled */
+			ret = poll(&block_poll, 1, 1000);
+			if (ret < 0) {
+				mpsslog("%s %d: poll failed: %s\n",
+					__func__, __LINE__,
+					strerror(errno));
+				continue;
+			}
+
+			if (!(block_poll.revents & POLLIN)) {
+#ifdef DEBUG
+				mpsslog("%s %d: block_poll.revents=0x%x\n",
+					__func__, __LINE__, block_poll.revents);
+#endif
+				continue;
+			}
+
+			/* POLLIN */
+			while (vring.info->avail_idx !=
+				le16toh(vring.vr.avail->idx)) {
+				/* read header element */
+				avail_idx =
+					vring.info->avail_idx &
+					(vring.vr.num - 1);
+				desc_idx = le16toh(
+					vring.vr.avail->ring[avail_idx]);
+				desc = &vring.vr.desc[desc_idx];
+#ifdef DEBUG
+				mpsslog("%s() %d: avail_idx=%d ",
+					__func__, __LINE__,
+					vring.info->avail_idx);
+				mpsslog("vring.vr.num=%d desc=%p\n",
+					vring.vr.num, desc);
+#endif
+				status = header_error_check(desc);
+				ret = read_header(
+					mic->mic_virtblk.virtio_block_fd,
+					&hdr, desc_idx);
+				if (ret < 0) {
+					mpsslog("%s() %d %s: ret=%d %s\n",
+						__func__, __LINE__,
+						mic->name, ret,
+						strerror(errno));
+					break;
+				}
+				/* buffer element */
+				piov = iovec;
+				status = 0;
+				fos = mic->mic_virtblk.backend_addr +
+					(hdr.sector * SECTOR_SIZE);
+				buffer_desc_idx = next_desc(desc);
+				desc_idx = buffer_desc_idx;
+				for (desc = &vring.vr.desc[buffer_desc_idx];
+				     desc->flags & VRING_DESC_F_NEXT;
+				     desc_idx = next_desc(desc),
+					     desc = &vring.vr.desc[desc_idx]) {
+					piov->iov_len = desc->len;
+					piov->iov_base = fos;
+					piov++;
+					fos += desc->len;
+				}
+				/* Returning NULLs for VIRTIO_BLK_T_GET_ID. */
+				if (hdr.type & ~(VIRTIO_BLK_T_OUT |
+					VIRTIO_BLK_T_GET_ID)) {
+					/*
+					  VIRTIO_BLK_T_IN - does not do
+					  anything. Probably for documenting.
+					  VIRTIO_BLK_T_SCSI_CMD - for
+					  virtio_scsi.
+					  VIRTIO_BLK_T_FLUSH - turned off in
+					  config space.
+					  VIRTIO_BLK_T_BARRIER - defined but not
+					  used in anywhere.
+					*/
+					mpsslog("%s() %d: type %x ",
+						__func__, __LINE__,
+						hdr.type);
+					mpsslog("is not supported\n");
+					status = -ENOTSUP;
+
+				} else {
+					ret = transfer_blocks(
+					mic->mic_virtblk.virtio_block_fd,
+						iovec,
+						piov - iovec);
+					if (ret < 0 &&
+					    status != 0)
+						status = ret;
+				}
+				/* write status and update used pointer */
+				if (status != 0)
+					status = status_error_check(desc);
+				ret = write_status(
+					mic->mic_virtblk.virtio_block_fd,
+					&status);
+#ifdef DEBUG
+				mpsslog("%s() %d: write status=%d on desc=%p\n",
+					__func__, __LINE__,
+					status, desc);
+#endif
+			}
+		}
+		free(iovec);
+_stop_virtblk:
+		stop_virtblk(mic);
+_close_backend:
+		close_backend(mic);
+	}  /* forever */
+
+	pthread_exit(NULL);
+}
+
+static void
+reset(struct mic_info *mic)
+{
+#define RESET_TIMEOUT 120
+	int i = RESET_TIMEOUT;
+	setsysfs(mic->name, "state", "reset");
+	while (i) {
+		char *state;
+		state = readsysfs(mic->name, "state");
+		if (!state)
+			goto retry;
+		mpsslog("%s: %s %d state %s\n",
+			mic->name, __func__, __LINE__, state);
+
+		/*
+		 * If the shutdown was initiated by OSPM, the state stays
+		 * in "suspended" which is also a valid condition for reset.
+		 */
+		if ((!strcmp(state, "offline")) ||
+		    (!strcmp(state, "suspended"))) {
+			free(state);
+			break;
+		}
+		free(state);
+retry:
+		sleep(1);
+		i--;
+	}
+}
+
+static int
+get_mic_shutdown_status(struct mic_info *mic, char *shutdown_status)
+{
+	if (!strcmp(shutdown_status, "nop"))
+		return MIC_NOP;
+	if (!strcmp(shutdown_status, "crashed"))
+		return MIC_CRASHED;
+	if (!strcmp(shutdown_status, "halted"))
+		return MIC_HALTED;
+	if (!strcmp(shutdown_status, "poweroff"))
+		return MIC_POWER_OFF;
+	if (!strcmp(shutdown_status, "restart"))
+		return MIC_RESTART;
+	mpsslog("%s: BUG invalid status %s\n", mic->name, shutdown_status);
+	/* Invalid state */
+	assert(0);
+};
+
+static int get_mic_state(struct mic_info *mic, char *state)
+{
+	if (!strcmp(state, "offline"))
+		return MIC_OFFLINE;
+	if (!strcmp(state, "online"))
+		return MIC_ONLINE;
+	if (!strcmp(state, "shutting_down"))
+		return MIC_SHUTTING_DOWN;
+	if (!strcmp(state, "reset_failed"))
+		return MIC_RESET_FAILED;
+	if (!strcmp(state, "suspending"))
+		return MIC_SUSPENDING;
+	if (!strcmp(state, "suspended"))
+		return MIC_SUSPENDED;
+	mpsslog("%s: BUG invalid state %s\n", mic->name, state);
+	/* Invalid state */
+	assert(0);
+};
+
+static void mic_handle_shutdown(struct mic_info *mic)
+{
+#define SHUTDOWN_TIMEOUT 60
+	int i = SHUTDOWN_TIMEOUT, ret, stat = 0;
+	char *shutdown_status;
+	while (i) {
+		shutdown_status = readsysfs(mic->name, "shutdown_status");
+		if (!shutdown_status)
+			continue;
+		mpsslog("%s: %s %d shutdown_status %s\n",
+			mic->name, __func__, __LINE__, shutdown_status);
+		switch (get_mic_shutdown_status(mic, shutdown_status)) {
+		case MIC_RESTART:
+			mic->restart = 1;
+		case MIC_HALTED:
+		case MIC_POWER_OFF:
+		case MIC_CRASHED:
+			free(shutdown_status);
+			goto reset;
+		default:
+			break;
+		}
+		free(shutdown_status);
+		sleep(1);
+		i--;
+	}
+reset:
+	ret = kill(mic->pid, SIGTERM);
+	mpsslog("%s: %s %d kill pid %d ret %d\n",
+		mic->name, __func__, __LINE__,
+		mic->pid, ret);
+	if (!ret) {
+		ret = waitpid(mic->pid, &stat,
+			WIFSIGNALED(stat));
+		mpsslog("%s: %s %d waitpid ret %d pid %d\n",
+			mic->name, __func__, __LINE__,
+			ret, mic->pid);
+	}
+	if (ret == mic->pid)
+		reset(mic);
+}
+
+static void *
+mic_config(void *arg)
+{
+	struct mic_info *mic = (struct mic_info *)arg;
+	char *state = NULL;
+	char pathname[PATH_MAX];
+	int fd, ret;
+	struct pollfd ufds[1];
+	char value[4096];
+
+	snprintf(pathname, PATH_MAX - 1, "%s/%s/%s",
+		 MICSYSFSDIR, mic->name, "state");
+
+	fd = open(pathname, O_RDONLY);
+	if (fd < 0) {
+		mpsslog("%s: opening file %s failed %s\n",
+			mic->name, pathname, strerror(errno));
+		goto error;
+	}
+
+	do {
+		ret = read(fd, value, sizeof(value));
+		if (ret < 0) {
+			mpsslog("%s: Failed to read sysfs entry '%s': %s\n",
+				mic->name, pathname, strerror(errno));
+			goto close_error1;
+		}
+retry:
+		state = readsysfs(mic->name, "state");
+		if (!state)
+			goto retry;
+		mpsslog("%s: %s %d state %s\n",
+			mic->name, __func__, __LINE__, state);
+		switch (get_mic_state(mic, state)) {
+		case MIC_SHUTTING_DOWN:
+			mic_handle_shutdown(mic);
+			goto close_error;
+		case MIC_SUSPENDING:
+			mic->boot_on_resume = 1;
+			setsysfs(mic->name, "state", "suspend");
+			mic_handle_shutdown(mic);
+			goto close_error;
+		case MIC_OFFLINE:
+			if (mic->boot_on_resume) {
+				setsysfs(mic->name, "state", "boot");
+				mic->boot_on_resume = 0;
+			}
+			break;
+		default:
+			break;
+		}
+		free(state);
+
+		ufds[0].fd = fd;
+		ufds[0].events = POLLERR | POLLPRI;
+		ret = poll(ufds, 1, -1);
+		if (ret < 0) {
+			mpsslog("%s: poll failed %s\n",
+				mic->name, strerror(errno));
+			goto close_error1;
+		}
+	} while (1);
+close_error:
+	free(state);
+close_error1:
+	close(fd);
+error:
+	init_mic(mic);
+	pthread_exit(NULL);
+}
+
+static void
+set_cmdline(struct mic_info *mic)
+{
+	char buffer[PATH_MAX];
+	int len;
+
+	len = snprintf(buffer, PATH_MAX,
+		"clocksource=tsc highres=off nohz=off ");
+	len += snprintf(buffer + len, PATH_MAX,
+		"cpufreq_on;corec6_off;pc3_off;pc6_off ");
+	len += snprintf(buffer + len, PATH_MAX,
+		"ifcfg=static;address,172.31.%d.1;netmask,255.255.255.0",
+		mic->id);
+
+	setsysfs(mic->name, "cmdline", buffer);
+	mpsslog("%s: Command line: \"%s\"\n", mic->name, buffer);
+	snprintf(buffer, PATH_MAX, "172.31.%d.1", mic->id);
+	mpsslog("%s: IPADDR: \"%s\"\n", mic->name, buffer);
+}
+
+static void
+set_log_buf_info(struct mic_info *mic)
+{
+	int fd;
+	off_t len;
+	char system_map[] = "/lib/firmware/mic/System.map";
+	char *map, *temp, log_buf[17] = {'\0'};
+
+	fd = open(system_map, O_RDONLY);
+	if (fd < 0) {
+		mpsslog("%s: Opening System.map failed: %d\n",
+			mic->name, errno);
+		return;
+	}
+	len = lseek(fd, 0, SEEK_END);
+	if (len < 0) {
+		mpsslog("%s: Reading System.map size failed: %d\n",
+			mic->name, errno);
+		close(fd);
+		return;
+	}
+	map = mmap(NULL, len, PROT_READ, MAP_PRIVATE, fd, 0);
+	if (map == MAP_FAILED) {
+		mpsslog("%s: mmap of System.map failed: %d\n",
+			mic->name, errno);
+		close(fd);
+		return;
+	}
+	temp = strstr(map, "__log_buf");
+	if (!temp) {
+		mpsslog("%s: __log_buf not found: %d\n", mic->name, errno);
+		munmap(map, len);
+		close(fd);
+		return;
+	}
+	strncpy(log_buf, temp - 19, 16);
+	setsysfs(mic->name, "log_buf_addr", log_buf);
+	mpsslog("%s: log_buf_addr: %s\n", mic->name, log_buf);
+	temp = strstr(map, "log_buf_len");
+	if (!temp) {
+		mpsslog("%s: log_buf_len not found: %d\n", mic->name, errno);
+		munmap(map, len);
+		close(fd);
+		return;
+	}
+	strncpy(log_buf, temp - 19, 16);
+	setsysfs(mic->name, "log_buf_len", log_buf);
+	mpsslog("%s: log_buf_len: %s\n", mic->name, log_buf);
+	munmap(map, len);
+	close(fd);
+}
+
+static void init_mic(struct mic_info *mic);
+
+static void
+change_virtblk_backend(int x, siginfo_t *siginfo, void *p)
+{
+	struct mic_info *mic;
+
+	for (mic = mic_list.next; mic != NULL; mic = mic->next)
+		mic->mic_virtblk.signaled = 1/* true */;
+}
+
+static void
+init_mic(struct mic_info *mic)
+{
+	struct sigaction ignore = {
+		.sa_flags = 0,
+		.sa_handler = SIG_IGN
+	};
+	struct sigaction act = {
+		.sa_flags = SA_SIGINFO,
+		.sa_sigaction = change_virtblk_backend,
+	};
+	char buffer[PATH_MAX];
+	int err;
+
+	/*
+	 * Currently, one virtio block device is supported for each MIC card
+	 * at a time. Any user (or test) can send a SIGUSR1 to the MIC daemon.
+	 * The signal informs the virtio block backend about a change in the
+	 * configuration file which specifies the virtio backend file name on
+	 * the host. Virtio block backend then re-reads the configuration file
+	 * and switches to the new block device. This signalling mechanism may
+	 * not be required once multiple virtio block devices are supported by
+	 * the MIC daemon.
+	 */
+	sigaction(SIGUSR1, &ignore, NULL);
+
+	mic->pid = fork();
+	switch (mic->pid) {
+	case 0:
+		set_log_buf_info(mic);
+		set_cmdline(mic);
+		add_virtio_device(mic, &virtcons_dev_page.dd);
+		add_virtio_device(mic, &virtnet_dev_page.dd);
+		err = pthread_create(&mic->mic_console.console_thread, NULL,
+			virtio_console, mic);
+		if (err)
+			mpsslog("%s virtcons pthread_create failed %s\n",
+				mic->name, strerror(err));
+		err = pthread_create(&mic->mic_net.net_thread, NULL,
+			virtio_net, mic);
+		if (err)
+			mpsslog("%s virtnet pthread_create failed %s\n",
+				mic->name, strerror(err));
+		err = pthread_create(&mic->mic_virtblk.block_thread, NULL,
+			virtio_block, mic);
+		if (err)
+			mpsslog("%s virtblk pthread_create failed %s\n",
+				mic->name, strerror(err));
+		sigemptyset(&act.sa_mask);
+		err = sigaction(SIGUSR1, &act, NULL);
+		if (err)
+			mpsslog("%s sigaction SIGUSR1 failed %s\n",
+				mic->name, strerror(errno));
+		while (1)
+			sleep(60);
+	case -1:
+		mpsslog("fork failed MIC name %s id %d errno %d\n",
+			mic->name, mic->id, errno);
+		break;
+	default:
+		if (mic->restart) {
+			snprintf(buffer, PATH_MAX, "boot");
+			setsysfs(mic->name, "state", buffer);
+			mpsslog("%s restarting mic %d\n",
+				mic->name, mic->restart);
+			mic->restart = 0;
+		}
+		pthread_create(&mic->config_thread, NULL, mic_config, mic);
+	}
+}
+
+static void
+start_daemon(void)
+{
+	struct mic_info *mic;
+
+	for (mic = mic_list.next; mic != NULL; mic = mic->next)
+		init_mic(mic);
+
+	while (1)
+		sleep(60);
+}
+
+static int
+init_mic_list(void)
+{
+	struct mic_info *mic = &mic_list;
+	struct dirent *file;
+	DIR *dp;
+	int cnt = 0;
+
+	dp = opendir(MICSYSFSDIR);
+	if (!dp)
+		return 0;
+
+	while ((file = readdir(dp)) != NULL) {
+		if (!strncmp(file->d_name, "mic", 3)) {
+			mic->next = calloc(1, sizeof(struct mic_info));
+			if (mic->next) {
+				mic = mic->next;
+				mic->id = atoi(&file->d_name[3]);
+				mic->name = malloc(strlen(file->d_name) + 16);
+				if (mic->name)
+					strcpy(mic->name, file->d_name);
+				mpsslog("MIC name %s id %d\n", mic->name,
+					mic->id);
+				cnt++;
+			}
+		}
+	}
+
+	closedir(dp);
+	return cnt;
+}
+
+void
+mpsslog(char *format, ...)
+{
+	va_list args;
+	char buffer[4096];
+	char ts[52], *ts1;
+	time_t t;
+
+	if (logfp == NULL)
+		return;
+
+	va_start(args, format);
+	vsprintf(buffer, format, args);
+	va_end(args);
+
+	time(&t);
+	ts1 = ctime_r(&t, ts);
+	ts1[strlen(ts1) - 1] = '\0';
+	fprintf(logfp, "%s: %s", ts1, buffer);
+
+	fflush(logfp);
+}
+
+int
+main(int argc, char *argv[])
+{
+	int cnt;
+	pid_t pid;
+
+	myname = argv[0];
+
+	logfp = fopen(LOGFILE_NAME, "a+");
+	if (!logfp) {
+		fprintf(stderr, "cannot open logfile '%s'\n", LOGFILE_NAME);
+		exit(1);
+	}
+	pid = fork();
+	switch (pid) {
+	case 0:
+		break;
+	case -1:
+		exit(2);
+	default:
+		exit(0);
+	}
+
+	mpsslog("MIC Daemon start\n");
+
+	cnt = init_mic_list();
+	if (cnt == 0) {
+		mpsslog("MIC module not loaded\n");
+		exit(3);
+	}
+	mpsslog("MIC found %d devices\n", cnt);
+
+	start_daemon();
+
+	exit(0);
+}
diff --git a/Documentation/mic/mpssd/mpssd.h b/Documentation/mic/mpssd/mpssd.h
new file mode 100644
index 0000000..f5f18b1
--- /dev/null
+++ b/Documentation/mic/mpssd/mpssd.h
@@ -0,0 +1,102 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC User Space Tools.
+ */
+#ifndef _MPSSD_H_
+#define _MPSSD_H_
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <libgen.h>
+#include <pthread.h>
+#include <stdarg.h>
+#include <time.h>
+#include <errno.h>
+#include <sys/dir.h>
+#include <sys/ioctl.h>
+#include <sys/poll.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/utsname.h>
+#include <sys/wait.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <pthread.h>
+#include <signal.h>
+#include <limits.h>
+#include <syslog.h>
+#include <getopt.h>
+#include <net/if.h>
+#include <linux/if_tun.h>
+#include <linux/if_tun.h>
+#include <linux/virtio_ids.h>
+
+#define MICSYSFSDIR "/sys/class/mic"
+#define LOGFILE_NAME "/var/log/mpssd"
+#define PAGE_SIZE 4096
+
+struct mic_console_info {
+	pthread_t       console_thread;
+	int		virtio_console_fd;
+	void		*console_dp;
+};
+
+struct mic_net_info {
+	pthread_t       net_thread;
+	int		virtio_net_fd;
+	int		tap_fd;
+	void		*net_dp;
+};
+
+struct mic_virtblk_info {
+	pthread_t       block_thread;
+	int		virtio_block_fd;
+	void		*block_dp;
+	volatile sig_atomic_t	signaled;
+	char		*backend_file;
+	int		backend;
+	void		*backend_addr;
+	long		backend_size;
+};
+
+struct mic_info {
+	int		id;
+	char		*name;
+	pthread_t       config_thread;
+	pid_t		pid;
+	struct mic_console_info	mic_console;
+	struct mic_net_info	mic_net;
+	struct mic_virtblk_info	mic_virtblk;
+	int		restart;
+	int		boot_on_resume;
+	struct mic_info *next;
+};
+
+__attribute__((format(printf, 1, 2)))
+void mpsslog(char *format, ...);
+char *readsysfs(char *dir, char *entry);
+int setsysfs(char *dir, char *entry, char *value);
+#endif
diff --git a/Documentation/mic/mpssd/sysfs.c b/Documentation/mic/mpssd/sysfs.c
new file mode 100644
index 0000000..8dd3269
--- /dev/null
+++ b/Documentation/mic/mpssd/sysfs.c
@@ -0,0 +1,102 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC User Space Tools.
+ */
+
+#include "mpssd.h"
+
+#define PAGE_SIZE 4096
+
+char *
+readsysfs(char *dir, char *entry)
+{
+	char filename[PATH_MAX];
+	char value[PAGE_SIZE];
+	char *string = NULL;
+	int fd;
+	int len;
+
+	if (dir == NULL)
+		snprintf(filename, PATH_MAX, "%s/%s", MICSYSFSDIR, entry);
+	else
+		snprintf(filename, PATH_MAX,
+			 "%s/%s/%s", MICSYSFSDIR, dir, entry);
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		mpsslog("Failed to open sysfs entry '%s': %s\n",
+			filename, strerror(errno));
+		return NULL;
+	}
+
+	len = read(fd, value, sizeof(value));
+	if (len < 0) {
+		mpsslog("Failed to read sysfs entry '%s': %s\n",
+			filename, strerror(errno));
+		goto readsys_ret;
+	}
+	if (len == 0)
+		goto readsys_ret;
+
+	value[len - 1] = '\0';
+
+	string = malloc(strlen(value) + 1);
+	if (string)
+		strcpy(string, value);
+
+readsys_ret:
+	close(fd);
+	return string;
+}
+
+int
+setsysfs(char *dir, char *entry, char *value)
+{
+	char filename[PATH_MAX];
+	char *oldvalue;
+	int fd, ret = 0;
+
+	if (dir == NULL)
+		snprintf(filename, PATH_MAX, "%s/%s", MICSYSFSDIR, entry);
+	else
+		snprintf(filename, PATH_MAX, "%s/%s/%s",
+			 MICSYSFSDIR, dir, entry);
+
+	oldvalue = readsysfs(dir, entry);
+
+	fd = open(filename, O_RDWR);
+	if (fd < 0) {
+		ret = errno;
+		mpsslog("Failed to open sysfs entry '%s': %s\n",
+			filename, strerror(errno));
+		goto done;
+	}
+
+	if (!oldvalue || strcmp(value, oldvalue)) {
+		if (write(fd, value, strlen(value)) < 0) {
+			ret = errno;
+			mpsslog("Failed to write new sysfs entry '%s': %s\n",
+				filename, strerror(errno));
+		}
+	}
+	close(fd);
+done:
+	if (oldvalue)
+		free(oldvalue);
+	return ret;
+}
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index d718bc2..bf5dbe3 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -18,8 +18,8 @@
 Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
 oriented protocol designed to solve issues present in UDP and TCP, particularly
 for real-time and multimedia (streaming) traffic.
-It divides into a base protocol (RFC 4340) and plugable congestion control
-modules called CCIDs. Like plugable TCP congestion control, at least one CCID
+It divides into a base protocol (RFC 4340) and pluggable congestion control
+modules called CCIDs. Like pluggable TCP congestion control, at least one CCID
 needs to be enabled in order for the protocol to function properly. In the Linux
 implementation, this is the TCP-like CCID2 (RFC 4341). Additional CCIDs, such as
 the TCP-friendly CCID3 (RFC 4342), are optional.
diff --git a/Documentation/networking/e100.txt b/Documentation/networking/e100.txt
index 13a3212..f862cf3 100644
--- a/Documentation/networking/e100.txt
+++ b/Documentation/networking/e100.txt
@@ -103,7 +103,7 @@
   PRO/100 Family of Adapters is e100.
 
   As an example, if you install the e100 driver for two PRO/100 adapters
-  (eth0 and eth1), add the following to a configuraton file in /etc/modprobe.d/
+  (eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/
 
        alias eth0 e100
        alias eth1 e100
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
index 09eb573..22bbc72 100644
--- a/Documentation/networking/ieee802154.txt
+++ b/Documentation/networking/ieee802154.txt
@@ -4,7 +4,7 @@
 
 Introduction
 ============
-The IEEE 802.15.4 working group focuses on standartization of bottom
+The IEEE 802.15.4 working group focuses on standardization of bottom
 two layers: Medium Access Control (MAC) and Physical (PHY). And there
 are mainly two options available for upper layers:
  - ZigBee - proprietary protocol from ZigBee Alliance
@@ -66,7 +66,7 @@
 code via plain sk_buffs. On skb reception skb->cb must contain additional
 info as described in the struct ieee802154_mac_cb. During packet transmission
 the skb->cb is used to provide additional data to device's header_ops->create
-function. Be aware, that this data can be overriden later (when socket code
+function. Be aware that this data can be overridden later (when socket code
 submits skb to qdisc), so if you need something from that cb later, you should
 store info in the skb->data on your own.
 
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
index e63fc1f..c74434d 100644
--- a/Documentation/networking/l2tp.txt
+++ b/Documentation/networking/l2tp.txt
@@ -197,7 +197,7 @@
 implemented to provide extra debug information to help diagnose
 problems.) Users should use the netlink API.
 
-/proc/net/pppol2tp is also provided for backwards compaibility with
+/proc/net/pppol2tp is also provided for backwards compatibility with
 the original pppol2tp driver. It lists information about L2TPv2
 tunnels and sessions only. Its use is discouraged.
 
diff --git a/Documentation/networking/netdev-FAQ.txt b/Documentation/networking/netdev-FAQ.txt
index d9112f0..0fe1c6e 100644
--- a/Documentation/networking/netdev-FAQ.txt
+++ b/Documentation/networking/netdev-FAQ.txt
@@ -4,23 +4,23 @@
 
 Q: What is netdev?
 
-A: It is a mailing list for all network related linux stuff.  This includes
+A: It is a mailing list for all network-related Linux stuff.  This includes
    anything found under net/  (i.e. core code like IPv6) and drivers/net
-   (i.e. hardware specific drivers) in the linux source tree.
+   (i.e. hardware specific drivers) in the Linux source tree.
 
    Note that some subsystems (e.g. wireless drivers) which have a high volume
    of traffic have their own specific mailing lists.
 
-   The netdev list is managed (like many other linux mailing lists) through
+   The netdev list is managed (like many other Linux mailing lists) through
    VGER ( http://vger.kernel.org/ ) and archives can be found below:
 
 	http://marc.info/?l=linux-netdev
 	http://www.spinics.net/lists/netdev/
 
-   Aside from subsystems like that mentioned above, all network related linux
-   development (i.e. RFC, review, comments, etc) takes place on netdev.
+   Aside from subsystems like that mentioned above, all network-related Linux
+   development (i.e. RFC, review, comments, etc.) takes place on netdev.
 
-Q: How do the changes posted to netdev make their way into linux?
+Q: How do the changes posted to netdev make their way into Linux?
 
 A: There are always two trees (git repositories) in play.  Both are driven
    by David Miller, the main network maintainer.  There is the "net" tree,
@@ -35,7 +35,7 @@
 Q: How often do changes from these trees make it to the mainline Linus tree?
 
 A: To understand this, you need to know a bit of background information
-   on the cadence of linux development.  Each new release starts off with
+   on the cadence of Linux development.  Each new release starts off with
    a two week "merge window" where the main maintainers feed their new
    stuff to Linus for merging into the mainline tree.  After the two weeks,
    the merge window is closed, and it is called/tagged "-rc1".  No new
@@ -46,7 +46,7 @@
    things are in a state of churn), and a week after the last vX.Y-rcN
    was done, the official "vX.Y" is released.
 
-   Relating that to netdev:  At the beginning of the 2 week merge window,
+   Relating that to netdev:  At the beginning of the 2-week merge window,
    the net-next tree will be closed - no new changes/features.  The
    accumulated new content of the past ~10 weeks will be passed onto
    mainline/Linus via a pull request for vX.Y -- at the same time,
@@ -59,16 +59,16 @@
    IMPORTANT:  Do not send new net-next content to netdev during the
    period during which net-next tree is closed.
 
-   Shortly after the two weeks have passed, (and vX.Y-rc1 is released) the
+   Shortly after the two weeks have passed (and vX.Y-rc1 is released), the
    tree for net-next reopens to collect content for the next (vX.Y+1) release.
 
    If you aren't subscribed to netdev and/or are simply unsure if net-next
    has re-opened yet, simply check the net-next git repository link above for
-   any new networking related commits.
+   any new networking-related commits.
 
    The "net" tree continues to collect fixes for the vX.Y content, and
    is fed back to Linus at regular (~weekly) intervals.  Meaning that the
-   focus for "net" is on stablilization and bugfixes.
+   focus for "net" is on stabilization and bugfixes.
 
    Finally, the vX.Y gets released, and the whole cycle starts over.
 
@@ -217,7 +217,7 @@
    to why it happens, and then if necessary, explain why the fix proposed
    is the best way to get things done.   Don't mangle whitespace, and as
    is common, don't mis-indent function arguments that span multiple lines.
-   If it is your 1st patch, mail it to yourself so you can test apply
+   If it is your first patch, mail it to yourself so you can test apply
    it to an unpatched tree to confirm infrastructure didn't mangle it.
 
    Finally, go back and read Documentation/SubmittingPatches to be
diff --git a/Documentation/networking/netlink_mmap.txt b/Documentation/networking/netlink_mmap.txt
index 5333788..b261229 100644
--- a/Documentation/networking/netlink_mmap.txt
+++ b/Documentation/networking/netlink_mmap.txt
@@ -45,7 +45,7 @@
 
 Conversion of the reception path involves calling poll() on the file
 descriptor, once the socket is readable the frames from the ring are
-processsed in order until no more messages are available, as indicated by
+processed in order until no more messages are available, as indicated by
 a status word in the frame header.
 
 On kernel side, in order to make use of memory mapped I/O on receive, the
@@ -56,7 +56,7 @@
 
 Conversion of the transmit path involves changing message construction to
 use memory from the TX ring instead of (usually) a buffer declared on the
-stack and setting up the frame header approriately. Optionally poll() can
+stack and setting up the frame header appropriately. Optionally poll() can
 be used to wait for free frames in the TX ring.
 
 Structured and definitions for using memory mapped I/O are contained in
@@ -231,7 +231,7 @@
 	if (setsockopt(fd, NETLINK_TX_RING, &req, sizeof(req)) < 0)
 		exit(1)
 
-	/* Calculate size of each invididual ring */
+	/* Calculate size of each individual ring */
 	ring_size = req.nm_block_nr * req.nm_block_size;
 
 	/* Map RX/TX rings. The TX ring is located after the RX ring */
diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt
index 9769457..355c6d8 100644
--- a/Documentation/networking/operstates.txt
+++ b/Documentation/networking/operstates.txt
@@ -89,8 +89,8 @@
 it as lower layer.
 
 Note that for certain kind of soft-devices, which are not managing any
-real hardware, there is possible to set this bit from userpsace.
-One should use TVL IFLA_CARRIER to do so.
+real hardware, it is possible to set this bit from userspace.  One
+should use TVL IFLA_CARRIER to do so.
 
 netif_carrier_ok() can be used to query that bit.
 
diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
index 60d05eb..b89bc82e 100644
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@@ -144,7 +144,7 @@
  (*) Calls use ACK packets to handle reliability.  Data packets are also
      explicitly sequenced per call.
 
- (*) There are two types of positive acknowledgement: hard-ACKs and soft-ACKs.
+ (*) There are two types of positive acknowledgment: hard-ACKs and soft-ACKs.
      A hard-ACK indicates to the far side that all the data received to a point
      has been received and processed; a soft-ACK indicates that the data has
      been received but may yet be discarded and re-requested.  The sender may
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 457b8bb..cdd916d 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -160,7 +160,7 @@
  o pmt: core has the embedded power module (optional).
  o force_sf_dma_mode: force DMA to use the Store and Forward mode
 		     instead of the Threshold.
- o force_thresh_dma_mode: force DMA to use the Shreshold mode other than
+ o force_thresh_dma_mode: force DMA to use the Threshold mode other than
 		     the Store and Forward mode.
  o riwt_off: force to disable the RX watchdog feature and switch to NAPI mode.
  o fix_mac_speed: this callback is used for modifying some syscfg registers
@@ -175,7 +175,7 @@
 	     registers.
  o custom_cfg/custom_data: this is a custom configuration that can be passed
 			   while initializing the resources.
- o bsp_priv: another private poiter.
+ o bsp_priv: another private pointer.
 
 For MDIO bus The we have:
 
@@ -271,7 +271,7 @@
  o dwmac1000_dma.c:  dma functions for the GMAC chip;
  o dwmac1000.h: specific header file for the GMAC;
  o dwmac100_core: MAC 100 core and dma code;
- o dwmac100_dma.c: dma funtions for the MAC chip;
+ o dwmac100_dma.c: dma functions for the MAC chip;
  o dwmac1000.h: specific header file for the MAC;
  o dwmac_lib.c: generic DMA functions shared among chips;
  o enh_desc.c: functions for handling enhanced descriptors;
@@ -364,4 +364,4 @@
 10) TODO:
  o XGMAC is not supported.
  o Complete the TBI & RTBI support.
- o extened VLAN support for 3.70a SYNP GMAC.
+ o extend VLAN support for 3.70a SYNP GMAC.
diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt
index 9a8041d..97282da 100644
--- a/Documentation/networking/vortex.txt
+++ b/Documentation/networking/vortex.txt
@@ -68,7 +68,7 @@
 
 There are several parameters which may be provided to the driver when
 its module is loaded.  These are usually placed in /etc/modprobe.d/*.conf
-configuretion files.  Example:
+configuration files.  Example:
 
 options 3c59x debug=3 rx_copybreak=300
 
@@ -178,7 +178,7 @@
 
   The driver's interrupt service routine can handle many receive and
   transmit packets in a single invocation.  It does this in a loop. 
-  The value of max_interrupt_work governs how mnay times the interrupt
+  The value of max_interrupt_work governs how many times the interrupt
   service routine will loop.  The default value is 32 loops.  If this
   is exceeded the interrupt service routine gives up and generates a
   warning message "eth0: Too much work in interrupt".
diff --git a/Documentation/networking/x25-iface.txt b/Documentation/networking/x25-iface.txt
index 78f662e..7f213b5 100644
--- a/Documentation/networking/x25-iface.txt
+++ b/Documentation/networking/x25-iface.txt
@@ -105,7 +105,7 @@
     later.
     The lapb module interface was modified to support this. Its
     data_indication() method should now transparently pass the
-    netif_rx() return value to the (lapb mopdule) caller.
+    netif_rx() return value to the (lapb module) caller.
 (2) Drivers for kernel versions 2.2.x should always check the global
     variable netdev_dropping when a new frame is received. The driver
     should only call netif_rx() if netdev_dropping is zero. Otherwise
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
new file mode 100644
index 0000000..0103e4b
--- /dev/null
+++ b/Documentation/phy.txt
@@ -0,0 +1,166 @@
+			    PHY SUBSYSTEM
+		  Kishon Vijay Abraham I <kishon@ti.com>
+
+This document explains the Generic PHY Framework along with the APIs provided,
+and how-to-use.
+
+1. Introduction
+
+*PHY* is the abbreviation for physical layer. It is used to connect a device
+to the physical medium e.g., the USB controller has a PHY to provide functions
+such as serialization, de-serialization, encoding, decoding and is responsible
+for obtaining the required data transmission rate. Note that some USB
+controllers have PHY functionality embedded into it and others use an external
+PHY. Other peripherals that use PHY include Wireless LAN, Ethernet,
+SATA etc.
+
+The intention of creating this framework is to bring the PHY drivers spread
+all over the Linux kernel to drivers/phy to increase code re-use and for
+better code maintainability.
+
+This framework will be of use only to devices that use external PHY (PHY
+functionality is not embedded within the controller).
+
+2. Registering/Unregistering the PHY provider
+
+PHY provider refers to an entity that implements one or more PHY instances.
+For the simple case where the PHY provider implements only a single instance of
+the PHY, the framework provides its own implementation of of_xlate in
+of_phy_simple_xlate. If the PHY provider implements multiple instances, it
+should provide its own implementation of of_xlate. of_xlate is used only for
+dt boot case.
+
+#define of_phy_provider_register(dev, xlate)    \
+        __of_phy_provider_register((dev), THIS_MODULE, (xlate))
+
+#define devm_of_phy_provider_register(dev, xlate)       \
+        __devm_of_phy_provider_register((dev), THIS_MODULE, (xlate))
+
+of_phy_provider_register and devm_of_phy_provider_register macros can be used to
+register the phy_provider and it takes device and of_xlate as
+arguments. For the dt boot case, all PHY providers should use one of the above
+2 macros to register the PHY provider.
+
+void devm_of_phy_provider_unregister(struct device *dev,
+	struct phy_provider *phy_provider);
+void of_phy_provider_unregister(struct phy_provider *phy_provider);
+
+devm_of_phy_provider_unregister and of_phy_provider_unregister can be used to
+unregister the PHY.
+
+3. Creating the PHY
+
+The PHY driver should create the PHY in order for other peripheral controllers
+to make use of it. The PHY framework provides 2 APIs to create the PHY.
+
+struct phy *phy_create(struct device *dev, const struct phy_ops *ops,
+        struct phy_init_data *init_data);
+struct phy *devm_phy_create(struct device *dev, const struct phy_ops *ops,
+	struct phy_init_data *init_data);
+
+The PHY drivers can use one of the above 2 APIs to create the PHY by passing
+the device pointer, phy ops and init_data.
+phy_ops is a set of function pointers for performing PHY operations such as
+init, exit, power_on and power_off. *init_data* is mandatory to get a reference
+to the PHY in the case of non-dt boot. See section *Board File Initialization*
+on how init_data should be used.
+
+Inorder to dereference the private data (in phy_ops), the phy provider driver
+can use phy_set_drvdata() after creating the PHY and use phy_get_drvdata() in
+phy_ops to get back the private data.
+
+4. Getting a reference to the PHY
+
+Before the controller can make use of the PHY, it has to get a reference to
+it. This framework provides the following APIs to get a reference to the PHY.
+
+struct phy *phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_get(struct device *dev, const char *string);
+
+phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
+the string arguments should contain the phy name as given in the dt data and
+in the case of non-dt boot, it should contain the label of the PHY.
+The only difference between the two APIs is that devm_phy_get associates the
+device with the PHY using devres on successful PHY get. On driver detach,
+release function is invoked on the the devres data and devres data is freed.
+
+5. Releasing a reference to the PHY
+
+When the controller no longer needs the PHY, it has to release the reference
+to the PHY it has obtained using the APIs mentioned in the above section. The
+PHY framework provides 2 APIs to release a reference to the PHY.
+
+void phy_put(struct phy *phy);
+void devm_phy_put(struct device *dev, struct phy *phy);
+
+Both these APIs are used to release a reference to the PHY and devm_phy_put
+destroys the devres associated with this PHY.
+
+6. Destroying the PHY
+
+When the driver that created the PHY is unloaded, it should destroy the PHY it
+created using one of the following 2 APIs.
+
+void phy_destroy(struct phy *phy);
+void devm_phy_destroy(struct device *dev, struct phy *phy);
+
+Both these APIs destroy the PHY and devm_phy_destroy destroys the devres
+associated with this PHY.
+
+7. PM Runtime
+
+This subsystem is pm runtime enabled. So while creating the PHY,
+pm_runtime_enable of the phy device created by this subsystem is called and
+while destroying the PHY, pm_runtime_disable is called. Note that the phy
+device created by this subsystem will be a child of the device that calls
+phy_create (PHY provider device).
+
+So pm_runtime_get_sync of the phy_device created by this subsystem will invoke
+pm_runtime_get_sync of PHY provider device because of parent-child relationship.
+It should also be noted that phy_power_on and phy_power_off performs
+phy_pm_runtime_get_sync and phy_pm_runtime_put respectively.
+There are exported APIs like phy_pm_runtime_get, phy_pm_runtime_get_sync,
+phy_pm_runtime_put, phy_pm_runtime_put_sync, phy_pm_runtime_allow and
+phy_pm_runtime_forbid for performing PM operations.
+
+8. Board File Initialization
+
+Certain board file initialization is necessary in order to get a reference
+to the PHY in the case of non-dt boot.
+Say we have a single device that implements 3 PHYs that of USB, SATA and PCIe,
+then in the board file the following initialization should be done.
+
+struct phy_consumer consumers[] = {
+	PHY_CONSUMER("dwc3.0", "usb"),
+	PHY_CONSUMER("pcie.0", "pcie"),
+	PHY_CONSUMER("sata.0", "sata"),
+};
+PHY_CONSUMER takes 2 parameters, first is the device name of the controller
+(PHY consumer) and second is the port name.
+
+struct phy_init_data init_data = {
+	.consumers = consumers,
+	.num_consumers = ARRAY_SIZE(consumers),
+};
+
+static const struct platform_device pipe3_phy_dev = {
+	.name = "pipe3-phy",
+	.id = -1,
+	.dev = {
+		.platform_data = {
+			.init_data = &init_data,
+		},
+	},
+};
+
+then, while doing phy_create, the PHY driver should pass this init_data
+	phy_create(dev, ops, pdata->init_data);
+
+and the controller driver (phy consumer) should pass the port name along with
+the device to get a reference to the PHY
+	phy_get(dev, "pcie");
+
+9. DeviceTree Binding
+
+The documentation for PHY dt binding can be found @
+Documentation/devicetree/bindings/phy/phy-bindings.txt
diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
index d35dcdd..c03b1be 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/pps/pps.txt
@@ -66,6 +66,21 @@
 into files /dev/pps0, /dev/pps1, etc..
 
 
+PPS with USB to serial devices
+------------------------------
+
+It is possible to grab the PPS from an USB to serial device. However,
+you should take into account the latencies and jitter introduced by
+the USB stack. Users has reported clock instability around +-1ms when
+synchronized with PPS through USB. This isn't suited for time server
+synchronization.
+
+If your device doesn't report PPS, you can check that the feature is
+supported by its driver. Most of the time, you only need to add a call
+to usb_serial_handle_dcd_change after checking the DCD status (see
+ch341 and pl2303 examples).
+
+
 Coding example
 --------------
 
diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
index fcaf0b4..3da1633 100644
--- a/Documentation/s390/s390dbf.txt
+++ b/Documentation/s390/s390dbf.txt
@@ -158,6 +158,16 @@
 Description:   Sets new actual debug level if new_level is valid. 
 
 ---------------------------------------------------------------------------
+bool debug_level_enabled (debug_info_t * id, int level);
+
+Parameter:    id:	  handle for debug log
+	      level:	  debug level
+
+Return Value: True if level is less or equal to the current debug level.
+
+Description:  Returns true if debug events for the specified level would be
+	      logged. Otherwise returns false.
+---------------------------------------------------------------------------
 void debug_stop_all(void);
 
 Parameter:     none
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index 067c47d..c3a7689 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -264,10 +264,6 @@
 	Locking: none.
 	Interrupts: caller dependent.
 
-  set_wake(port,state)
-	Enable/disable power management wakeup on serial activity.  Not
-	currently implemented.
-
   type(port)
 	Return a pointer to a string constant describing the specified
 	port, or return NULL, in which case the string 'unknown' is
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 8cb4d78..0e307c9 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -11,27 +11,29 @@
 You need to say "yes" to 'Magic SysRq key (CONFIG_MAGIC_SYSRQ)' when
 configuring the kernel. When running a kernel with SysRq compiled in,
 /proc/sys/kernel/sysrq controls the functions allowed to be invoked via
-the SysRq key. By default the file contains 1 which means that every
-possible SysRq request is allowed (in older versions SysRq was disabled
-by default, and you were required to specifically enable it at run-time
-but this is not the case any more). Here is the list of possible values
-in /proc/sys/kernel/sysrq:
+the SysRq key. The default value in this file is set by the
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE config symbol, which itself defaults
+to 1. Here is the list of possible values in /proc/sys/kernel/sysrq:
    0 - disable sysrq completely
    1 - enable all functions of sysrq
   >1 - bitmask of allowed sysrq functions (see below for detailed function
        description):
-          2 - enable control of console logging level
-          4 - enable control of keyboard (SAK, unraw)
-          8 - enable debugging dumps of processes etc.
-         16 - enable sync command
-         32 - enable remount read-only
-         64 - enable signalling of processes (term, kill, oom-kill)
-        128 - allow reboot/poweroff
-        256 - allow nicing of all RT tasks
+          2 =   0x2 - enable control of console logging level
+          4 =   0x4 - enable control of keyboard (SAK, unraw)
+          8 =   0x8 - enable debugging dumps of processes etc.
+         16 =  0x10 - enable sync command
+         32 =  0x20 - enable remount read-only
+         64 =  0x40 - enable signalling of processes (term, kill, oom-kill)
+        128 =  0x80 - allow reboot/poweroff
+        256 = 0x100 - allow nicing of all RT tasks
 
 You can set the value in the file by the following command:
     echo "number" >/proc/sys/kernel/sysrq
 
+The number may be written here either as decimal or as hexadecimal
+with the 0x prefix. CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE must always be
+written in hexadecimal.
+
 Note that the value of /proc/sys/kernel/sysrq influences only the invocation
 via a keyboard. Invocation of any operation via /proc/sysrq-trigger is always
 allowed (by a user with admin privileges).
diff --git a/MAINTAINERS b/MAINTAINERS
index dcd69cb..5c746dd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -763,6 +763,10 @@
 W:	http://www.linux4sam.org
 S:	Supported
 F:	arch/arm/mach-at91/
+F:	arch/arm/boot/dts/at91*.dts
+F:	arch/arm/boot/dts/at91*.dtsi
+F:	arch/arm/boot/dts/sama*.dts
+F:	arch/arm/boot/dts/sama*.dtsi
 
 ARM/CALXEDA HIGHBANK ARCHITECTURE
 M:	Rob Herring <rob.herring@calxeda.com>
@@ -929,7 +933,7 @@
 L:	linux-omap@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-omap2/board-igep0020.c
+F:	arch/arm/boot/dts/omap3-igep*
 
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
@@ -1157,11 +1161,6 @@
 F:	arch/arm/mach-rockchip/
 F:	drivers/*/*rockchip*
 
-ARM/SHARK MACHINE SUPPORT
-M:	Alexander Schulz <alex@shark-linux.de>
-W:	http://www.shark-linux.de/shark.html
-S:	Maintained
-
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
 M:	Kukjin Kim <kgene.kim@samsung.com>
@@ -1169,6 +1168,8 @@
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/boot/dts/s3c*
+F:	arch/arm/boot/dts/exynos*
 F:	arch/arm/plat-samsung/
 F:	arch/arm/mach-s3c24*/
 F:	arch/arm/mach-s3c64xx/
@@ -3691,6 +3692,14 @@
 F:	include/asm-generic/
 F:	include/uapi/asm-generic/
 
+GENERIC PHY FRAMEWORK
+M:	Kishon Vijay Abraham I <kishon@ti.com>
+L:	linux-kernel@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
+S:	Supported
+F:	drivers/phy/
+F:	include/linux/phy/
+
 GENERIC UIO DRIVER FOR PCI DEVICES
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
@@ -4232,7 +4241,7 @@
 F:	drivers/media/rc/iguanair.c
 
 IIO SUBSYSTEM AND DRIVERS
-M:	Jonathan Cameron <jic23@cam.ac.uk>
+M:	Jonathan Cameron <jic23@kernel.org>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/iio/
@@ -4769,6 +4778,13 @@
 F:	Documentation/hwmon/k8temp
 F:	drivers/hwmon/k8temp.c
 
+KTAP
+M:	Jovi Zhangwei <jovi.zhangwei@gmail.com>
+W:	http://www.ktap.org
+L:	ktap@freelists.org
+S:	Maintained
+F:	drivers/staging/ktap/
+
 KCONFIG
 M:	Michal Marek <mmarek@suse.cz>
 L:	linux-kbuild@vger.kernel.org
@@ -6109,6 +6125,12 @@
 S:	Maintained
 F:	drivers/gpio/gpio-omap.c
 
+OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
+M:	Mark Jackson <mpfj@newflow.co.uk>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/boot/dts/am335x-nano.dts
+
 OMFS FILESYSTEM
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-karma-devel@lists.sourceforge.net
@@ -6950,7 +6972,7 @@
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
 F:	Documentation/RCU/torture.txt
-F:	kernel/rcutorture.c
+F:	kernel/rcu/torture.c
 
 RDC R-321X SoC
 M:	Florian Fainelli <florian@openwrt.org>
@@ -6977,8 +6999,9 @@
 F:	Documentation/RCU/
 X:	Documentation/RCU/torture.txt
 F:	include/linux/rcu*
-F:	kernel/rcu*
-X:	kernel/rcutorture.c
+X:	include/linux/srcu.h
+F:	kernel/rcu/
+X:	kernel/rcu/torture.c
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
 M:	Alessandro Zummo <a.zummo@towertech.it>
@@ -7667,8 +7690,8 @@
 W:	http://www.rdrop.com/users/paulmck/RCU/
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
-F:	include/linux/srcu*
-F:	kernel/srcu*
+F:	include/linux/srcu.h
+F:	kernel/rcu/srcu.c
 
 SMACK SECURITY MODULE
 M:	Casey Schaufler <casey@schaufler-ca.com>
@@ -8003,7 +8026,7 @@
 F:	drivers/staging/media/go7007/
 
 STAGING - INDUSTRIAL IO
-M:	Jonathan Cameron <jic23@cam.ac.uk>
+M:	Jonathan Cameron <jic23@kernel.org>
 L:	linux-iio@vger.kernel.org
 S:	Odd Fixes
 F:	drivers/staging/iio/
@@ -8919,61 +8942,14 @@
 S:	Maintained
 F:	drivers/net/usb/rtl8150.c
 
-USB SERIAL BELKIN F5U103 DRIVER
-M:	William Greathouse <wgreathouse@smva.com>
+USB SERIAL SUBSYSTEM
+M:	Johan Hovold <jhovold@gmail.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
-F:	drivers/usb/serial/belkin_sa.*
-
-USB SERIAL CYPRESS M8 DRIVER
-M:	Lonnie Mendez <dignome@gmail.com>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-W:	http://geocities.com/i0xox0i
-W:	http://firstlight.net/cvs
-F:	drivers/usb/serial/cypress_m8.*
-
-USB SERIAL CYBERJACK DRIVER
-M:	Matthias Bruestle and Harald Welte <support@reiner-sct.com>
-W:	http://www.reiner-sct.de/support/treiber_cyberjack.php
-S:	Maintained
-F:	drivers/usb/serial/cyberjack.c
-
-USB SERIAL DIGI ACCELEPORT DRIVER
-M:	Peter Berger <pberger@brimson.com>
-M:	Al Borchers <alborchers@steinerpoint.com>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-F:	drivers/usb/serial/digi_acceleport.c
-
-USB SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	linux-usb@vger.kernel.org
-S:	Supported
 F:	Documentation/usb/usb-serial.txt
-F:	drivers/usb/serial/generic.c
-F:	drivers/usb/serial/usb-serial.c
+F:	drivers/usb/serial/
 F:	include/linux/usb/serial.h
 
-USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-M:	Gary Brubaker <xavyer@ix.netcom.com>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-F:	drivers/usb/serial/empeg.c
-
-USB SERIAL KEYSPAN DRIVER
-M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-F:	drivers/usb/serial/*keyspan*
-
-USB SERIAL WHITEHEAT DRIVER
-M:	Support Department <support@connecttech.com>
-L:	linux-usb@vger.kernel.org
-W:	http://www.connecttech.com
-S:	Supported
-F:	drivers/usb/serial/whiteheat*
-
 USB SMSC75XX ETHERNET DRIVER
 M:	Steve Glendinning <steve.glendinning@shawell.net>
 L:	netdev@vger.kernel.org
diff --git a/Makefile b/Makefile
index 868c0eb..67077ad 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*
diff --git a/arch/Kconfig b/arch/Kconfig
index af2cc6e..ad95133 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -390,6 +390,16 @@
 	  Some architectures generate an _ in front of C symbols; things like
 	  module loading and assembly files need to know about this.
 
+config HAVE_IRQ_EXIT_ON_IRQ_STACK
+	bool
+	help
+	  Architecture doesn't only execute the irq handler on the irq stack
+	  but also irq_exit(). This way we can process softirqs on this irq
+	  stack instead of switching to a new one when we call __do_softirq()
+	  in the end of an hardirq.
+	  This spares a stack switch and improves cache usage on softirq
+	  processing.
+
 #
 # ABI hall of shame
 #
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 91dbb27..5ede546 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -35,6 +35,12 @@
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_STACKOVERFLOW
 
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 
@@ -130,17 +136,14 @@
 config ARC_HAS_COH_CACHES
 	def_bool n
 
-config ARC_HAS_COH_RTSC
-	def_bool n
-
 config ARC_HAS_REENTRANT_IRQ_LV2
 	def_bool n
 
 endif
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
 	depends on SMP
 	default "2"
 
@@ -326,8 +329,7 @@
 	bool "Insn: RTSC (64-bit r/o cycle counter)"
 	default y
 	depends on ARC_CPU_REL_4_10
-	# if SMP, enable RTSC only if counter is coherent across cores
-	depends on !SMP || ARC_HAS_COH_RTSC
+	depends on !SMP
 
 endmenu   # "ARC CPU Configuration"
 
diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig
index 4ca50f1..e283aa5 100644
--- a/arch/arc/configs/fpga_defconfig
+++ b/arch/arc/configs/fpga_defconfig
@@ -2,6 +2,8 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -62,4 +64,5 @@
 CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_PREEMPT is not set
 CONFIG_XZ_DEC=y
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index e4abdaa..2fd3162 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -17,13 +17,7 @@
 #endif
 
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-/* For a rare case where customers have differently config I/D */
-#define ARC_ICACHE_LINE_LEN	L1_CACHE_BYTES
-#define ARC_DCACHE_LINE_LEN	L1_CACHE_BYTES
-
-#define ICACHE_LINE_MASK	(~(ARC_ICACHE_LINE_LEN - 1))
-#define DCACHE_LINE_MASK	(~(ARC_DCACHE_LINE_LEN - 1))
+#define CACHE_LINE_MASK		(~(L1_CACHE_BYTES - 1))
 
 /*
  * ARC700 doesn't cache any access in top 256M.
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index c0a7210..291a70d 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -18,8 +18,8 @@
 
 #include <asm-generic/irq.h>
 
-extern void __init arc_init_IRQ(void);
-extern int __init get_hw_config_num_irq(void);
+extern void arc_init_IRQ(void);
+extern int get_hw_config_num_irq(void);
 
 void arc_local_timer_setup(unsigned int cpu);
 
diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h
index b68b53f..cb7efc2 100644
--- a/arch/arc/include/asm/irqflags.h
+++ b/arch/arc/include/asm/irqflags.h
@@ -151,16 +151,38 @@
 
 #else
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+.macro TRACE_ASM_IRQ_DISABLE
+	bl	trace_hardirqs_off
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+	bl	trace_hardirqs_on
+.endm
+
+#else
+
+.macro TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+.endm
+
+#endif
+
 .macro IRQ_DISABLE  scratch
 	lr	\scratch, [status32]
 	bic	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
 	flag	\scratch
+	TRACE_ASM_IRQ_DISABLE
 .endm
 
 .macro IRQ_ENABLE  scratch
 	lr	\scratch, [status32]
 	or	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
 	flag	\scratch
+	TRACE_ASM_IRQ_ENABLE
 .endm
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index c2663b3..8c84ae9 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -48,7 +48,7 @@
 #ifndef __ASSEMBLY__
 
 typedef struct {
-	unsigned long asid;	/* 8 bit MMU PID + Generation cycle */
+	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
 } mm_context_t;
 
 #ifdef CONFIG_ARC_DBG_TLB_PARANOIA
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index 43a1b51..1fd467e 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -30,13 +30,13 @@
  * "Fast Context Switch" i.e. no TLB flush on ctxt-switch
  *
  * Linux assigns each task a unique ASID. A simple round-robin allocation
- * of H/w ASID is done using software tracker @asid_cache.
+ * of H/w ASID is done using software tracker @asid_cpu.
  * When it reaches max 255, the allocation cycle starts afresh by flushing
  * the entire TLB and wrapping ASID back to zero.
  *
  * A new allocation cycle, post rollover, could potentially reassign an ASID
  * to a different task. Thus the rule is to refresh the ASID in a new cycle.
- * The 32 bit @asid_cache (and mm->asid) have 8 bits MMU PID and rest 24 bits
+ * The 32 bit @asid_cpu (and mm->asid) have 8 bits MMU PID and rest 24 bits
  * serve as cycle/generation indicator and natural 32 bit unsigned math
  * automagically increments the generation when lower 8 bits rollover.
  */
@@ -47,9 +47,11 @@
 #define MM_CTXT_FIRST_CYCLE	(MM_CTXT_ASID_MASK + 1)
 #define MM_CTXT_NO_ASID		0UL
 
-#define hw_pid(mm)		(mm->context.asid & MM_CTXT_ASID_MASK)
+#define asid_mm(mm, cpu)	mm->context.asid[cpu]
+#define hw_pid(mm, cpu)		(asid_mm(mm, cpu) & MM_CTXT_ASID_MASK)
 
-extern unsigned int asid_cache;
+DECLARE_PER_CPU(unsigned int, asid_cache);
+#define asid_cpu(cpu)		per_cpu(asid_cache, cpu)
 
 /*
  * Get a new ASID if task doesn't have a valid one (unalloc or from prev cycle)
@@ -57,6 +59,7 @@
  */
 static inline void get_new_mmu_context(struct mm_struct *mm)
 {
+	const unsigned int cpu = smp_processor_id();
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -71,28 +74,28 @@
 	 * 	 first need to destroy the context, setting it to invalid
 	 * 	 value.
 	 */
-	if (!((mm->context.asid ^ asid_cache) & MM_CTXT_CYCLE_MASK))
+	if (!((asid_mm(mm, cpu) ^ asid_cpu(cpu)) & MM_CTXT_CYCLE_MASK))
 		goto set_hw;
 
 	/* move to new ASID and handle rollover */
-	if (unlikely(!(++asid_cache & MM_CTXT_ASID_MASK))) {
+	if (unlikely(!(++asid_cpu(cpu) & MM_CTXT_ASID_MASK))) {
 
-		flush_tlb_all();
+		local_flush_tlb_all();
 
 		/*
 		 * Above checke for rollover of 8 bit ASID in 32 bit container.
 		 * If the container itself wrapped around, set it to a non zero
 		 * "generation" to distinguish from no context
 		 */
-		if (!asid_cache)
-			asid_cache = MM_CTXT_FIRST_CYCLE;
+		if (!asid_cpu(cpu))
+			asid_cpu(cpu) = MM_CTXT_FIRST_CYCLE;
 	}
 
 	/* Assign new ASID to tsk */
-	mm->context.asid = asid_cache;
+	asid_mm(mm, cpu) = asid_cpu(cpu);
 
 set_hw:
-	write_aux_reg(ARC_REG_PID, hw_pid(mm) | MMU_ENABLE);
+	write_aux_reg(ARC_REG_PID, hw_pid(mm, cpu) | MMU_ENABLE);
 
 	local_irq_restore(flags);
 }
@@ -104,16 +107,45 @@
 static inline int
 init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
-	mm->context.asid = MM_CTXT_NO_ASID;
+	int i;
+
+	for_each_possible_cpu(i)
+		asid_mm(mm, i) = MM_CTXT_NO_ASID;
+
 	return 0;
 }
 
+static inline void destroy_context(struct mm_struct *mm)
+{
+	unsigned long flags;
+
+	/* Needed to elide CONFIG_DEBUG_PREEMPT warning */
+	local_irq_save(flags);
+	asid_mm(mm, smp_processor_id()) = MM_CTXT_NO_ASID;
+	local_irq_restore(flags);
+}
+
 /* Prepare the MMU for task: setup PID reg with allocated ASID
     If task doesn't have an ASID (never alloc or stolen, get a new ASID)
 */
 static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 			     struct task_struct *tsk)
 {
+	const int cpu = smp_processor_id();
+
+	/*
+	 * Note that the mm_cpumask is "aggregating" only, we don't clear it
+	 * for the switched-out task, unlike some other arches.
+	 * It is used to enlist cpus for sending TLB flush IPIs and not sending
+	 * it to CPUs where a task once ran-on, could cause stale TLB entry
+	 * re-use, specially for a multi-threaded task.
+	 * e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps.
+	 *      For a non-aggregating mm_cpumask, IPI not sent C1, and if T1
+	 *      were to re-migrate to C1, it could access the unmapped region
+	 *      via any existing stale TLB entries.
+	 */
+	cpumask_set_cpu(cpu, mm_cpumask(next));
+
 #ifndef CONFIG_SMP
 	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
 	write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
@@ -131,11 +163,6 @@
  */
 #define activate_mm(prev, next)		switch_mm(prev, next, NULL)
 
-static inline void destroy_context(struct mm_struct *mm)
-{
-	mm->context.asid = MM_CTXT_NO_ASID;
-}
-
 /* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping
  * for retiring-mm. However destroy_context( ) still needs to do that because
  * between mm_release( ) = >deactive_mm( ) and
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 229e506..e10f8ce 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -31,7 +31,7 @@
 extern int root_mountflags, end_mem;
 extern int running_on_hw;
 
-void __init setup_processor(void);
+void setup_processor(void);
 void __init setup_arch_memory(void);
 
 #endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index c4fb211..eefc29f 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -30,7 +30,7 @@
  * APIs provided by arch SMP code to rest of arch code
  */
 extern void __init smp_init_cpus(void);
-extern void __init first_lines_of_secondary(void);
+extern void first_lines_of_secondary(void);
 extern const char *arc_platform_smp_cpuinfo(void);
 
 /*
diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h
index b2f9bc7..71c7b2e 100644
--- a/arch/arc/include/asm/tlbflush.h
+++ b/arch/arc/include/asm/tlbflush.h
@@ -18,11 +18,18 @@
 void local_flush_tlb_range(struct vm_area_struct *vma,
 			   unsigned long start, unsigned long end);
 
-/* XXX: Revisit for SMP */
+#ifndef CONFIG_SMP
 #define flush_tlb_range(vma, s, e)	local_flush_tlb_range(vma, s, e)
 #define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
 #define flush_tlb_kernel_range(s, e)	local_flush_tlb_kernel_range(s, e)
 #define flush_tlb_all()			local_flush_tlb_all()
 #define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
-
+#else
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+							 unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+#endif /* CONFIG_SMP */
 #endif
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h
index 60702f3..3e5f071 100644
--- a/arch/arc/include/asm/unaligned.h
+++ b/arch/arc/include/asm/unaligned.h
@@ -22,7 +22,8 @@
 misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		 struct callee_regs *cregs)
 {
-	return 0;
+	/* Not fixed */
+	return 1;
 }
 #endif
 
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
index 34410eb..c14a5be 100644
--- a/arch/arc/kernel/ctx_sw.c
+++ b/arch/arc/kernel/ctx_sw.c
@@ -17,6 +17,8 @@
 #include <asm/asm-offsets.h>
 #include <linux/sched.h>
 
+#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
+
 struct task_struct *__sched
 __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
 {
@@ -45,7 +47,16 @@
 #endif
 
 		/* set ksp of outgoing task in tsk->thread.ksp */
+#if KSP_WORD_OFF <= 255
 		"st.as   sp, [%3, %1]    \n\t"
+#else
+		/*
+		 * Workaround for NR_CPUS=4k
+		 * %1 is bigger than 255 (S9 offset for st.as)
+		 */
+		"add2    r24, %3, %1     \n\t"
+		"st      sp, [r24]       \n\t"
+#endif
 
 		"sync   \n\t"
 
@@ -97,7 +108,7 @@
 		/* FP/BLINK restore generated by gcc (standard func epilogue */
 
 		: "=r"(tmp)
-		: "n"((TASK_THREAD + THREAD_KSP) / 4), "r"(next), "r"(prev)
+		: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
 		: "blink"
 	);
 
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
index d897234..65690e7 100644
--- a/arch/arc/kernel/ctx_sw_asm.S
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -14,6 +14,8 @@
 #include <asm/asm-offsets.h>
 #include <asm/linkage.h>
 
+#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
+
 ;################### Low Level Context Switch ##########################
 
 	.section .sched.text,"ax",@progbits
@@ -28,8 +30,13 @@
 	SAVE_CALLEE_SAVED_KERNEL
 
 	/* Save the now KSP in task->thread.ksp */
-	st.as  sp, [r0, (TASK_THREAD + THREAD_KSP)/4]
-
+#if KSP_WORD_OFF  <= 255
+	st.as  sp, [r0, KSP_WORD_OFF]
+#else
+	/* Workaround for NR_CPUS=4k as ST.as can only take s9 offset */
+	add2	r24, r0, KSP_WORD_OFF
+	st	sp, [r24]
+#endif
 	/*
 	* Return last task in r0 (return reg)
 	* On ARC, Return reg = First Arg reg = r0.
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index b908dde..47d09d0 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -250,6 +250,14 @@
 	lr  r0, [icause1]
 	and r0, r0, 0x1f
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	; icause1 needs to be read early, before calling tracing, which
+	; can clobber scratch regs, hence use of stack to stash it
+	push r0
+	TRACE_ASM_IRQ_DISABLE
+	pop  r0
+#endif
+
 	bl.d  @arch_do_IRQ
 	mov r1, sp
 
@@ -337,9 +345,9 @@
 	;  vineetg: Mar 6th: Random Seg Fault issue #1
 	;  ecr and efa were not saved in case an Intr sneaks in
 	;  after fake rtie
-	;
+
 	lr  r2, [ecr]
-	lr  r1, [efa]	; Faulting Data address
+	lr  r0, [efa]	; Faulting Data address
 
 	; --------(4) Return from CPU Exception Mode ---------
 	;  Fake a rtie, but rtie to next label
@@ -348,6 +356,8 @@
 
 	FAKE_RET_FROM_EXCPN r9
 
+	mov   r1, sp
+
 	;------ (5) Type of Protection Violation? ----------
 	;
 	; ProtV Hardware Exception is triggered for Access Faults of 2 types
@@ -358,16 +368,12 @@
 	bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
 
 	;========= (6a) Access Violation Processing ========
-	mov r0, sp              ; pt_regs
 	bl  do_page_fault
 	b   ret_from_exception
 
 	;========== (6b) Non aligned access ============
 4:
-	mov r0, r1
-	mov r1, sp              ; pt_regs
 
-#ifdef  CONFIG_ARC_MISALIGN_ACCESS
 	SAVE_CALLEE_SAVED_USER
 	mov r2, sp              ; callee_regs
 
@@ -376,9 +382,6 @@
 	; TBD: optimize - do this only if a callee reg was involved
 	; either a dst of emulated LD/ST or src with address-writeback
 	RESTORE_CALLEE_SAVED_USER
-#else
-	bl  do_misaligned_error
-#endif
 
 	b   ret_from_exception
 
@@ -575,6 +578,7 @@
 	; --- (Slow Path #2) pending signal  ---
 	mov r0, sp	; pt_regs for arg to do_signal()/do_notify_resume()
 
+	GET_CURR_THR_INFO_FLAGS   r9
 	bbit0  r9, TIF_SIGPENDING, .Lchk_notify_resume
 
 	; Normal Trap/IRQ entry only saves Scratch (caller-saved) regs
@@ -640,6 +644,8 @@
 
 restore_regs :
 
+	TRACE_ASM_IRQ_ENABLE
+
 	lr	r10, [status32]
 
 	; Restore REG File. In case multiple Events outstanding,
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 0f944f0..2c878e9 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -95,7 +95,7 @@
 ;----------------------------------------------------------------
 ;     First lines of code run by secondary before jumping to 'C'
 ;----------------------------------------------------------------
-	.section .init.text, "ax",@progbits
+	.section .text, "ax",@progbits
 	.type first_lines_of_secondary, @function
 	.globl first_lines_of_secondary
 
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index 5fc9245..a4b141e 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -39,10 +39,14 @@
 	level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5;
 	level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6;
 
-	if (level_mask) {
+	/*
+	 * Write to register, even if no LV2 IRQs configured to reset it
+	 * in case bootloader had mucked with it
+	 */
+	write_aux_reg(AUX_IRQ_LEV, level_mask);
+
+	if (level_mask)
 		pr_info("Level-2 interrupts bitset %x\n", level_mask);
-		write_aux_reg(AUX_IRQ_LEV, level_mask);
-	}
 }
 
 /*
@@ -146,7 +150,7 @@
 	set_irq_regs(old_regs);
 }
 
-int __init get_hw_config_num_irq(void)
+int get_hw_config_num_irq(void)
 {
 	uint32_t val = read_aux_reg(ARC_REG_VECBASE_BCR);
 
diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c
index a7698fb..a2ff5c5 100644
--- a/arch/arc/kernel/kgdb.c
+++ b/arch/arc/kernel/kgdb.c
@@ -196,6 +196,18 @@
 	instruction_pointer(regs) = ip;
 }
 
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+	local_irq_disable();
+}
+
 struct kgdb_arch arch_kgdb_ops = {
 	/* breakpoint instruction: TRAP_S 0x3 */
 #ifdef CONFIG_CPU_BIG_ENDIAN
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index 72f97822..eb1c2ee 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -87,13 +87,13 @@
 
 static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
 	kcb->kprobe_status = kcb->prev_kprobe.status;
 }
 
 static inline void __kprobes set_current_kprobe(struct kprobe *p)
 {
-	__get_cpu_var(current_kprobe) = p;
+	__this_cpu_write(current_kprobe, p);
 }
 
 static void __kprobes resume_execution(struct kprobe *p, unsigned long addr,
@@ -237,7 +237,7 @@
 
 		return 1;
 	} else if (kprobe_running()) {
-		p = __get_cpu_var(current_kprobe);
+		p = __this_cpu_read(current_kprobe);
 		if (p->break_handler && p->break_handler(p, regs)) {
 			setup_singlestep(p, regs);
 			kcb->kprobe_status = KPROBE_HIT_SS;
diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c
index e227a2b..2768fa1 100644
--- a/arch/arc/kernel/reset.c
+++ b/arch/arc/kernel/reset.c
@@ -31,3 +31,4 @@
 }
 
 void (*pm_power_off) (void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 2c68bc7e..d9e15f1 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -37,8 +37,7 @@
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
-
-void read_arc_build_cfg_regs(void)
+static void read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -106,7 +105,7 @@
 	{ {0x00, NULL		} }
 };
 
-char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
+static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	int n = 0;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
@@ -171,7 +170,7 @@
 	{0x6, "Dual 16x16 and 32x16"}
 };
 
-char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
+static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	int n = 0;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
@@ -234,7 +233,7 @@
 	return buf;
 }
 
-void arc_chk_ccms(void)
+static void arc_chk_ccms(void)
 {
 #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -269,7 +268,7 @@
  * hardware has dedicated regs which need to be saved/restored on ctx-sw
  * (Single Precision uses core regs), thus kernel is kind of oblivious to it
  */
-void arc_chk_fpu(void)
+static void arc_chk_fpu(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index bca3052..c2f9ebb 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -95,7 +95,7 @@
  *        If it turns out to be elaborate, it's better to code it in assembly
  *
  */
-void __attribute__((weak)) arc_platform_smp_wait_to_boot(int cpu)
+void __weak arc_platform_smp_wait_to_boot(int cpu)
 {
 	/*
 	 * As a hack for debugging - since debugger will single-step over the
@@ -128,6 +128,7 @@
 	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
+	cpumask_set_cpu(cpu, mm_cpumask(mm));
 
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
@@ -210,7 +211,6 @@
 	IPI_NOP = 0,
 	IPI_RESCHEDULE = 1,
 	IPI_CALL_FUNC,
-	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP
 };
 
@@ -254,7 +254,7 @@
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	ipi_send_msg(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+	ipi_send_msg(cpumask_of(cpu), IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
@@ -286,10 +286,6 @@
 			generic_smp_call_function_interrupt();
 			break;
 
-		case IPI_CALL_FUNC_SINGLE:
-			generic_smp_call_function_single_interrupt();
-			break;
-
 		case IPI_CPU_STOP:
 			ipi_cpu_stop(cpu);
 			break;
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index f8b7d88..9ce47cf 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -237,11 +237,14 @@
  */
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
+	/* Assumes @tsk is sleeping so unwinds from __switch_to */
 	arc_unwind_core(tsk, NULL, __collect_all_but_sched, trace);
 }
 
 void save_stack_trace(struct stack_trace *trace)
 {
-	arc_unwind_core(current, NULL, __collect_all, trace);
+	/* Pass NULL for task so it unwinds the current call frame */
+	arc_unwind_core(NULL, NULL, __collect_all, trace);
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
 #endif
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index 3fde7de..e5f3a83 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -63,9 +63,10 @@
 
 int arc_counter_setup(void)
 {
-	/* RTSC insn taps into cpu clk, needs no setup */
-
-	/* For SMP, only allowed if cross-core-sync, hence usable as cs */
+	/*
+	 * For SMP this needs to be 0. However Kconfig glue doesn't
+	 * enable this option for SMP configs
+	 */
 	return 1;
 }
 
@@ -206,7 +207,7 @@
 
 static irqreturn_t timer_irq_handler(int irq, void *dev_id)
 {
-	struct clock_event_device *clk = &__get_cpu_var(arc_clockevent_device);
+	struct clock_event_device *clk = this_cpu_ptr(&arc_clockevent_device);
 
 	arc_timer_event_ack(clk->mode == CLOCK_EVT_MODE_PERIODIC);
 	clk->event_handler(clk);
@@ -223,7 +224,7 @@
  * Setup the local event timer for @cpu
  * N.B. weak so that some exotic ARC SoCs can completely override it
  */
-void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
+void __weak arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index e21692d..3eadfda 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -84,19 +84,18 @@
 DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
 DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN)
 
-#ifdef CONFIG_ARC_MISALIGN_ACCESS
 /*
  * Entry Point for Misaligned Data access Exception, for emulating in software
  */
 int do_misaligned_access(unsigned long address, struct pt_regs *regs,
 			 struct callee_regs *cregs)
 {
+	/* If emulation not enabled, or failed, kill the task */
 	if (misaligned_fixup(address, regs, cregs) != 0)
 		return do_misaligned_error(address, regs);
 
 	return 0;
 }
-#endif
 
 /*
  * Entry point for miscll errors such as Nested Exceptions
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 5a1259c..6b58c1d 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -182,7 +182,7 @@
 
 #ifdef CONFIG_ARC_HAS_ICACHE
 	/* 1. Confirm some of I-cache params which Linux assumes */
-	if (ic->line_len != ARC_ICACHE_LINE_LEN)
+	if (ic->line_len != L1_CACHE_BYTES)
 		panic("Cache H/W doesn't match kernel Config");
 
 	if (ic->ver != CONFIG_ARC_MMU_VER)
@@ -205,7 +205,7 @@
 		return;
 
 #ifdef CONFIG_ARC_HAS_DCACHE
-	if (dc->line_len != ARC_DCACHE_LINE_LEN)
+	if (dc->line_len != L1_CACHE_BYTES)
 		panic("Cache H/W doesn't match kernel Config");
 
 	/* check for D-Cache aliasing */
@@ -240,6 +240,67 @@
 #define OP_INV		0x1
 #define OP_FLUSH	0x2
 #define OP_FLUSH_N_INV	0x3
+#define OP_INV_IC	0x4
+
+/*
+ * Common Helper for Line Operations on {I,D}-Cache
+ */
+static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
+				     unsigned long sz, const int cacheop)
+{
+	unsigned int aux_cmd, aux_tag;
+	int num_lines;
+	const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE;
+
+	if (cacheop == OP_INV_IC) {
+		aux_cmd = ARC_REG_IC_IVIL;
+		aux_tag = ARC_REG_IC_PTAG;
+	}
+	else {
+		/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
+		aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
+		aux_tag = ARC_REG_DC_PTAG;
+	}
+
+	/* Ensure we properly floor/ceil the non-line aligned/sized requests
+	 * and have @paddr - aligned to cache line and integral @num_lines.
+	 * This however can be avoided for page sized since:
+	 *  -@paddr will be cache-line aligned already (being page aligned)
+	 *  -@sz will be integral multiple of line size (being page sized).
+	 */
+	if (!full_page_op) {
+		sz += paddr & ~CACHE_LINE_MASK;
+		paddr &= CACHE_LINE_MASK;
+		vaddr &= CACHE_LINE_MASK;
+	}
+
+	num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
+
+#if (CONFIG_ARC_MMU_VER <= 2)
+	/* MMUv2 and before: paddr contains stuffed vaddrs bits */
+	paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
+#else
+	/* if V-P const for loop, PTAG can be written once outside loop */
+	if (full_page_op)
+		write_aux_reg(ARC_REG_DC_PTAG, paddr);
+#endif
+
+	while (num_lines-- > 0) {
+#if (CONFIG_ARC_MMU_VER > 2)
+		/* MMUv3, cache ops require paddr seperately */
+		if (!full_page_op) {
+			write_aux_reg(aux_tag, paddr);
+			paddr += L1_CACHE_BYTES;
+		}
+
+		write_aux_reg(aux_cmd, vaddr);
+		vaddr += L1_CACHE_BYTES;
+#else
+		write_aux_reg(aux, paddr);
+		paddr += L1_CACHE_BYTES;
+#endif
+	}
+}
 
 #ifdef CONFIG_ARC_HAS_DCACHE
 
@@ -289,53 +350,6 @@
 		write_aux_reg(ARC_REG_DC_CTRL, tmp & ~DC_CTRL_INV_MODE_FLUSH);
 }
 
-/*
- * Per Line Operation on D-Cache
- * Doesn't deal with type-of-op/IRQ-disabling/waiting-for-flush-to-complete
- * It's sole purpose is to help gcc generate ZOL
- * (aliasing VIPT dcache flushing needs both vaddr and paddr)
- */
-static inline void __dc_line_loop(unsigned long paddr, unsigned long vaddr,
-				  unsigned long sz, const int aux_reg)
-{
-	int num_lines;
-
-	/* Ensure we properly floor/ceil the non-line aligned/sized requests
-	 * and have @paddr - aligned to cache line and integral @num_lines.
-	 * This however can be avoided for page sized since:
-	 *  -@paddr will be cache-line aligned already (being page aligned)
-	 *  -@sz will be integral multiple of line size (being page sized).
-	 */
-	if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) {
-		sz += paddr & ~DCACHE_LINE_MASK;
-		paddr &= DCACHE_LINE_MASK;
-		vaddr &= DCACHE_LINE_MASK;
-	}
-
-	num_lines = DIV_ROUND_UP(sz, ARC_DCACHE_LINE_LEN);
-
-#if (CONFIG_ARC_MMU_VER <= 2)
-	paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
-#endif
-
-	while (num_lines-- > 0) {
-#if (CONFIG_ARC_MMU_VER > 2)
-		/*
-		 * Just as for I$, in MMU v3, D$ ops also require
-		 * "tag" bits in DC_PTAG, "index" bits in FLDL,IVDL ops
-		 */
-		write_aux_reg(ARC_REG_DC_PTAG, paddr);
-
-		write_aux_reg(aux_reg, vaddr);
-		vaddr += ARC_DCACHE_LINE_LEN;
-#else
-		/* paddr contains stuffed vaddrs bits */
-		write_aux_reg(aux_reg, paddr);
-#endif
-		paddr += ARC_DCACHE_LINE_LEN;
-	}
-}
-
 /* For kernel mappings cache operation: index is same as paddr */
 #define __dc_line_op_k(p, sz, op)	__dc_line_op(p, p, sz, op)
 
@@ -346,7 +360,6 @@
 				unsigned long sz, const int cacheop)
 {
 	unsigned long flags, tmp = tmp;
-	int aux;
 
 	local_irq_save(flags);
 
@@ -361,12 +374,7 @@
 		write_aux_reg(ARC_REG_DC_CTRL, tmp | DC_CTRL_INV_MODE_FLUSH);
 	}
 
-	if (cacheop & OP_INV)	/* Inv / flush-n-inv use same cmd reg */
-		aux = ARC_REG_DC_IVDL;
-	else
-		aux = ARC_REG_DC_FLDL;
-
-	__dc_line_loop(paddr, vaddr, sz, aux);
+	__cache_line_loop(paddr, vaddr, sz, cacheop);
 
 	if (cacheop & OP_FLUSH)	/* flush / flush-n-inv both wait */
 		wait_for_flush();
@@ -438,42 +446,9 @@
 				unsigned long sz)
 {
 	unsigned long flags;
-	int num_lines;
-
-	/*
-	 * Ensure we properly floor/ceil the non-line aligned/sized requests:
-	 * However page sized flushes can be compile time optimised.
-	 *  -@paddr will be cache-line aligned already (being page aligned)
-	 *  -@sz will be integral multiple of line size (being page sized).
-	 */
-	if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) {
-		sz += paddr & ~ICACHE_LINE_MASK;
-		paddr &= ICACHE_LINE_MASK;
-		vaddr &= ICACHE_LINE_MASK;
-	}
-
-	num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN);
-
-#if (CONFIG_ARC_MMU_VER <= 2)
-	/* bits 17:13 of vaddr go as bits 4:0 of paddr */
-	paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
-#endif
 
 	local_irq_save(flags);
-	while (num_lines-- > 0) {
-#if (CONFIG_ARC_MMU_VER > 2)
-		/* tag comes from phy addr */
-		write_aux_reg(ARC_REG_IC_PTAG, paddr);
-
-		/* index bits come from vaddr */
-		write_aux_reg(ARC_REG_IC_IVIL, vaddr);
-		vaddr += ARC_ICACHE_LINE_LEN;
-#else
-		/* paddr contains stuffed vaddrs bits */
-		write_aux_reg(ARC_REG_IC_IVIL, paddr);
-#endif
-		paddr += ARC_ICACHE_LINE_LEN;
-	}
+	__cache_line_loop(paddr, vaddr, sz, OP_INV_IC);
 	local_irq_restore(flags);
 }
 
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index d63f3de..9c69552 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -17,7 +17,7 @@
 #include <asm/pgalloc.h>
 #include <asm/mmu.h>
 
-static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
+static int handle_vmalloc_fault(unsigned long address)
 {
 	/*
 	 * Synchronize this task's top level page-table
@@ -27,7 +27,7 @@
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
-	pgd = pgd_offset_fast(mm, address);
+	pgd = pgd_offset_fast(current->active_mm, address);
 	pgd_k = pgd_offset_k(address);
 
 	if (!pgd_present(*pgd_k))
@@ -52,7 +52,7 @@
 	return 1;
 }
 
-void do_page_fault(struct pt_regs *regs, unsigned long address)
+void do_page_fault(unsigned long address, struct pt_regs *regs)
 {
 	struct vm_area_struct *vma = NULL;
 	struct task_struct *tsk = current;
@@ -72,7 +72,7 @@
 	 * nothing more.
 	 */
 	if (address >= VMALLOC_START && address <= VMALLOC_END) {
-		ret = handle_vmalloc_fault(mm, address);
+		ret = handle_vmalloc_fault(address);
 		if (unlikely(ret))
 			goto bad_area_nosemaphore;
 		else
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 71cb26d..e1acf0c 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -100,7 +100,7 @@
 
 
 /* A copy of the ASID from the PID reg is kept in asid_cache */
-unsigned int asid_cache = MM_CTXT_FIRST_CYCLE;
+DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;
 
 /*
  * Utility Routine to erase a J-TLB entry
@@ -274,6 +274,7 @@
 void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			   unsigned long end)
 {
+	const unsigned int cpu = smp_processor_id();
 	unsigned long flags;
 
 	/* If range @start to @end is more than 32 TLB entries deep,
@@ -297,9 +298,9 @@
 
 	local_irq_save(flags);
 
-	if (vma->vm_mm->context.asid != MM_CTXT_NO_ASID) {
+	if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) {
 		while (start < end) {
-			tlb_entry_erase(start | hw_pid(vma->vm_mm));
+			tlb_entry_erase(start | hw_pid(vma->vm_mm, cpu));
 			start += PAGE_SIZE;
 		}
 	}
@@ -346,6 +347,7 @@
 
 void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 {
+	const unsigned int cpu = smp_processor_id();
 	unsigned long flags;
 
 	/* Note that it is critical that interrupts are DISABLED between
@@ -353,14 +355,87 @@
 	 */
 	local_irq_save(flags);
 
-	if (vma->vm_mm->context.asid != MM_CTXT_NO_ASID) {
-		tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm));
+	if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) {
+		tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu));
 		utlb_invalidate();
 	}
 
 	local_irq_restore(flags);
 }
 
+#ifdef CONFIG_SMP
+
+struct tlb_args {
+	struct vm_area_struct *ta_vma;
+	unsigned long ta_start;
+	unsigned long ta_end;
+};
+
+static inline void ipi_flush_tlb_page(void *arg)
+{
+	struct tlb_args *ta = arg;
+
+	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_range(void *arg)
+{
+	struct tlb_args *ta = arg;
+
+	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+
+static inline void ipi_flush_tlb_kernel_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu((smp_call_func_t)local_flush_tlb_all, NULL, 1);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	on_each_cpu_mask(mm_cpumask(mm), (smp_call_func_t)local_flush_tlb_mm,
+			 mm, 1);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	struct tlb_args ta = {
+		.ta_vma = vma,
+		.ta_start = uaddr
+	};
+
+	on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page, &ta, 1);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+		     unsigned long end)
+{
+	struct tlb_args ta = {
+		.ta_vma = vma,
+		.ta_start = start,
+		.ta_end = end
+	};
+
+	on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, &ta, 1);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	struct tlb_args ta = {
+		.ta_start = start,
+		.ta_end = end
+	};
+
+	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+}
+#endif
+
 /*
  * Routine to create a TLB entry
  */
@@ -400,7 +475,7 @@
 
 	local_irq_save(flags);
 
-	tlb_paranoid_check(vma->vm_mm->context.asid, address);
+	tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), address);
 
 	address &= PAGE_MASK;
 
@@ -610,9 +685,9 @@
 			  struct pt_regs *regs)
 {
 	int set, way, n;
-	unsigned int pd0[4], pd1[4];	/* assume max 4 ways */
 	unsigned long flags, is_valid;
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	unsigned int pd0[mmu->ways], pd1[mmu->ways];
 
 	local_irq_save(flags);
 
@@ -637,7 +712,7 @@
 			continue;
 
 		/* Scan the set for duplicate ways: needs a nested loop */
-		for (way = 0; way < mmu->ways; way++) {
+		for (way = 0; way < mmu->ways - 1; way++) {
 			if (!pd0[way])
 				continue;
 
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index cf7d7d9..3fcfdb3 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -369,8 +369,8 @@
 	EXCEPTION_PROLOGUE
 
 	; ------- setup args for Linux Page fault Hanlder ---------
-	mov_s r0, sp
-	lr  r1, [efa]
+	mov_s r1, sp
+	lr    r0, [efa]
 
 	; We don't want exceptions to be disabled while the fault is handled.
 	; Now that we have saved the context we return from exception hence
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1ad6fb6..04163fe 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -317,6 +317,7 @@
 	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
 	select SPARSE_IRQ
+	select USE_OF
 	select VERSATILE_FPGA_IRQ
 	help
 	  Support for ARM's Integrator platform.
@@ -358,7 +359,6 @@
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select HAVE_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
@@ -372,7 +372,6 @@
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
@@ -386,8 +385,9 @@
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
+	select CLKSRC_MMIO
 	select CPU_FA526
+	select GENERIC_CLOCKEVENTS
 	select NEED_MACH_GPIO_H
 	help
 	  Support for the Cortina Systems Gemini family SoCs
@@ -631,7 +631,6 @@
 config ARCH_MSM
 	bool "Qualcomm MSM"
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 	select CLKSRC_OF if OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
@@ -649,7 +648,6 @@
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_CLK
 	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -706,7 +704,6 @@
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -727,21 +724,22 @@
 	select ARM_VIC
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
 	select NEED_MACH_GPIO_H
 	select NO_IOPORT
 	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
-	select SAMSUNG_CLKSRC
 	select SAMSUNG_GPIOLIB_4BIT
+	select SAMSUNG_WAKEMASK
 	select SAMSUNG_WDT_RESET
 	select USB_ARCH_HAS_OHCI
 	help
@@ -754,7 +752,6 @@
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -773,7 +770,6 @@
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -793,7 +789,6 @@
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -810,11 +805,9 @@
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_GIC
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -824,20 +817,6 @@
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
-config ARCH_SHARK
-	bool "Shark"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select ISA_DMA
-	select NEED_MACH_MEMORY_H
-	select PCI
-	select VIRT_TO_BUS
-	select ZONE_DMA
-	help
-	  Support for the StrongARM based Digital DNARD machine, also known
-	  as "Shark" (<http://www.shark-linux.de/shark.html>).
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -847,7 +826,6 @@
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select NEED_MACH_GPIO_H
 	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
@@ -865,7 +843,6 @@
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD
@@ -1009,9 +986,7 @@
 
 source "arch/arm/mach-s3c24xx/Kconfig"
 
-if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
-endif
 
 source "arch/arm/mach-s5p64x0/Kconfig"
 
@@ -1431,12 +1406,6 @@
 config PCI_SYSCALL
 	def_bool PCI
 
-# Select the host bridge type
-config PCI_HOST_VIA82C505
-	bool
-	depends on PCI && ARCH_SHARK
-	default y
-
 config PCI_HOST_ITE8152
 	bool
 	depends on PCI && MACH_ARMCORE
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9762c84..d597c6b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -386,6 +386,13 @@
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
+	config DEBUG_VF_UART
+		bool "Vybrid UART"
+		depends on SOC_VF610
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Vybrid based platforms.
+
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
 		depends on ARCH_NOMADIK
@@ -906,6 +913,7 @@
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
+	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index db50b62..8b66713 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -188,7 +188,6 @@
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHARK)		+= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
 machine-$(CONFIG_ARCH_SHMOBILE_MULTI) 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7ac1610..e7190bb 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -44,10 +44,6 @@
 OBJS		+= ll_char_wr.o font.o
 endif
 
-ifeq ($(CONFIG_ARCH_SHARK),y)
-OBJS		+= head-shark.o ofw-shark.o
-endif
-
 ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
deleted file mode 100644
index 92b5689..0000000
--- a/arch/arm/boot/compressed/head-shark.S
+++ /dev/null
@@ -1,140 +0,0 @@
-/* The head-file for the Shark
- * by Alexander Schulz
- *
- * Does the following:
- * - get the memory layout from firmware. This can only be done as long as the mmu
- *   is still on.
- * - switch the mmu off, so we have physical addresses
- * - copy the kernel to 0x08508000. This is done to have a fixed address where the
- *   C-parts (misc.c) are executed. This address must be known at compile-time,
- *   but the load-address of the kernel depends on how much memory is installed.
- * - Jump to this location.
- * - Set r8 with 0, r7 with the architecture ID for head.S
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-	
-		.section	".start", "ax"
-
-		.arch armv4
-		b	__beginning
-	
-__ofw_data:	.long	0				@ the number of memory blocks
-		.space  128				@ (startaddr,size) ...
-		.space  128				@ bootargs
-		.align
-
-__beginning:	mov	r4, r0				@ save the entry to the firmware
-
-		mov	r0, #0xC0			@ disable irq and fiq
-		mov	r1, r0
-		mrs	r3, cpsr
-		bic	r2, r3, r0
-		eor	r2, r2, r1
-		msr	cpsr_c, r2
-
-		mov	r0, r4				@ get the Memory layout from firmware
-		adr	r1, __ofw_data
-		add	r2, r1, #4
-		mov	lr, pc
-		b	ofw_init
-		mov	r1, #0
-
-		adr	r2, __mmu_off			@ calculate physical address
-		sub	r2, r2, #0xf0000000		@ openprom maps us at f000 virt, 0e50 phys
-		adr	r0, __ofw_data
-		ldr	r0, [r0, #4]
-		add	r2, r2, r0
-		add	r2, r2, #0x00500000
-
-		mrc	p15, 0, r3, c1, c0
-		bic	r3, r3, #0xC			@ Write Buffer and DCache
-		bic	r3, r3, #0x1000			@ ICache
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7		@ flush I,D caches on v4
-		mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-		mcr	p15, 0, r0, c8, c7		@ flush I,D TLBs on v4
-
-		bic	r3, r3, #0x1			@ MMU
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	pc, r2
-
-__copy_target:	.long	0x08507FFC
-__copy_end:	.long	0x08607FFC
-		
-		.word	_start
-		.word	__bss_start
-
-		.align
-__temp_stack:	.space 128
-
-__mmu_off:
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		orr	r0, r0, #0x00600000
-		sub	r0, r0, #4
-	
-		ldr	r1, __copy_end
-		ldr	r3, __copy_target
-
-/* r0 = 0x0e600000 (current end of kernelcode)
- * r3 = 0x08508000 (where it should begin)
- * r1 = 0x08608000 (end of copying area, 1MB)
- * The kernel is compressed, so 1 MB should be enough.
- * copy the kernel to the beginning of physical memory
- * We start from the highest address, so we can copy
- * from 0x08500000 to 0x08508000 if we have only 8MB
- */
-
-/* As we get more 2.6-kernels it gets more and more
- * uncomfortable to be bound to kernel images of 1MB only.
- * So we add a loop here, to be able to copy some more.
- * Alexander Schulz 2005-07-17
- */
-
-		mov	r4, #3				@ How many megabytes to copy
-
-
-__MoveCode:	sub	r4, r4, #1
-	
-__Copy:		ldr	r2, [r0], #-4
-		str	r2, [r1], #-4
-		teq	r1, r3
-		bne	__Copy
-
-		/* The firmware maps us in blocks of 1 MB, the next block is
-		   _below_ the last one. So our decrementing source pointer
-		   ist right here, but the destination pointer must be increased
-		   by 2 MB */
-		add	r1, r1, #0x00200000
-		add	r3, r3, #0x00100000
-
-		teq	r4, #0
-		bne	__MoveCode
-
-
-		/* and jump to it */
-		adr	r2, __go_on			@ where we want to jump
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		sub	r2, r2, r0			@ we are mapped add 0e50 now, sub that (-0e00)
-		sub	r2, r2, #0x00500000		@ -0050
-		ldr	r0, __copy_target		@ and add 0850 8000 instead
-		add	r0, r0, #4
-		add	r2, r2, r0
-		mov	pc, r2				@ and jump there
-
-__go_on:
-		adr	sp, __temp_stack
-		add	sp, sp, #128
-		adr	r0, __ofw_data
-		mov	lr, pc
-		b	create_params
-	
-		mov	r8, #0
-		mov	r7, #15
diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c
deleted file mode 100644
index 465c54b..0000000
--- a/arch/arm/boot/compressed/ofw-shark.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/ofw-shark.c
- *
- * by Alexander Schulz
- *
- * This file is used to get some basic information
- * about the memory layout of the shark we are running
- * on. Memory is usually divided in blocks a 8 MB.
- * And bootargs are copied from OpenFirmware.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-
-asmlinkage void
-create_params (unsigned long *buffer)
-{
-	/* Is there a better address? Also change in mach-shark/core.c */
-	struct tag *tag = (struct tag *) 0x08003000;
-	int j,i,m,k,nr_banks,size;
-	unsigned char *c;
-
-	k = 0;
-
-	/* Head of the taglist */
-	tag->hdr.tag  = ATAG_CORE;
-	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = 1;
-	tag->u.core.pagesize = PAGE_SIZE;
-	tag->u.core.rootdev = 0;
-
-	/* Build up one tagged block for each memory region */
-	size=0;
-	nr_banks=(unsigned int) buffer[0];
-	for (j=0;j<nr_banks;j++){
-		/* search the lowest address and put it into the next entry   */
-		/* not a fast sort algorithm, but there are at most 8 entries */
-		/* and this is used only once anyway                          */
-		m=0xffffffff;
-		for (i=0;i<(unsigned int) buffer[0];i++){
-			if (buffer[2*i+1]<m) {
-				m=buffer[2*i+1];
-				k=i;
-			}
-		}
-	  
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = buffer[2*k+2];
-		tag->u.mem.start = buffer[2*k+1];
-
-		size += buffer[2*k+2];
-
-		buffer[2*k+1]=0xffffffff;                    /* mark as copied */
-	}
-	
-	/* The command line */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_CMDLINE;
-	
-	c=(unsigned char *)(&buffer[34]);
-	j=0;
-	while (*c) tag->u.cmdline.cmdline[j++]=*c++;
-
-	tag->u.cmdline.cmdline[j]=0;
-	tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
-
-	/* Hardware revision */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_REVISION;
-	tag->hdr.size = tag_size(tag_revision);
-	tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
-
-	/* End of the taglist */
-	tag = tag_next(tag);
-	tag->hdr.tag = 0;
-	tag->hdr.size = 0;
-}
-
-
-typedef int (*ofw_handle_t)(void *);
-
-/* Everything below is called with a wrong MMU setting.
- * This means: no string constants, no initialization of
- * arrays, no global variables! This is ugly but I didn't
- * want to write this in assembler :-)
- */
-
-int
-of_decode_int(const unsigned char *p)
-{
-	unsigned int i = *p++ << 8;
-	i = (i + *p++) << 8;
-	i = (i + *p++) << 8;
-	return (i + *p);
-}
-  
-int
-OF_finddevice(ofw_handle_t openfirmware, char *name)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='f';
-	service[1]='i';
-	service[2]='n';
-	service[3]='d';
-	service[4]='d';
-	service[5]='e';
-	service[6]='v';
-	service[7]='i';
-	service[8]='c';
-	service[9]='e';
-	service[10]='\0';
-
-	args[0]=(unsigned int)service;
-	args[1]=1;
-	args[2]=1;
-	args[3]=(unsigned int)name;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[4];
-}
-
-int
-OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='l';
-	service[8]='e';
-	service[9]='n';
-	service[10]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 2;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[5];
-}
-  
-int
-OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
-{
-	unsigned int args[8];
-	char service[8];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 4;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-	args[5] = (unsigned int)buf;
-	args[6] = buflen;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[7];
-}
-  
-asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
-{
-	int phandle,i,mem_len,buffer[32];
-	char temp[15];
-  
-	temp[0]='/';
-	temp[1]='m';
-	temp[2]='e';
-	temp[3]='m';
-	temp[4]='o';
-	temp[5]='r';
-	temp[6]='y';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='r';
-	temp[1]='e';
-	temp[2]='g';
-	temp[3]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	*nomr=mem_len >> 3;
-
-	for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
-
-	temp[0]='/';
-	temp[1]='c';
-	temp[2]='h';
-	temp[3]='o';
-	temp[4]='s';
-	temp[5]='e';
-	temp[6]='n';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='b';
-	temp[1]='o';
-	temp[2]='o';
-	temp[3]='t';
-	temp[4]='a';
-	temp[5]='r';
-	temp[6]='g';
-	temp[7]='s';
-	temp[8]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	if (mem_len > 128) mem_len=128;
-	for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
-	pointer[i+33]=0;
-
-	temp[0]='/';
-	temp[1]='\0';
-	phandle=OF_finddevice(o,temp);
-	temp[0]='b';
-	temp[1]='a';
-	temp[2]='n';
-	temp[3]='n';
-	temp[4]='e';
-	temp[5]='r';
-	temp[6]='-';
-	temp[7]='n';
-	temp[8]='a';
-	temp[9]='m';
-	temp[10]='e';
-	temp[11]='\0';
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	* ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
-}
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 802720e..d57c1a6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -40,17 +40,17 @@
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
-
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
-
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-d2plug.dtb \
+	dove-d3plug.dtb \
 	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
@@ -96,22 +96,25 @@
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
 	kirkwood-nsa310a.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-openblocks_a6.dtb
+	kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
-	msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
 	armada-370-rd.dtb \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
+	armada-xp-matrix.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-karo-tx25.dtb \
@@ -142,8 +145,10 @@
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
@@ -159,6 +164,7 @@
 	imx28-cfa10057.dtb \
 	imx28-cfa10058.dtb \
 	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
@@ -172,9 +178,15 @@
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
+	omap3-evm-37xx.dtb \
+	omap3-n900.dtb \
+	omap3-n9.dtb \
+	omap3-n950.dtb \
 	omap3-tobi.dtb \
+	omap3-gta04.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \
+	omap3-zoom3.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
@@ -186,25 +198,33 @@
 	am335x-evmsk.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
+	am335x-nano.dtb \
+	am335x-base0033.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
-	am43x-epos-evm.dtb
+	am43x-epos-evm.dtb \
+	dra7-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
-	ste-hrefprev60.dtb \
-	ste-hrefv60plus.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
+	s3c6410-smdk6410.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
-	emev2-kzm9d-reference.dtb \
+	r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
 	r8a7740-armadillo800eva-reference.dtb \
 	r8a7779-marzen.dtb \
 	r8a7779-marzen-reference.dtb \
+	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \
 	r8a7790-lager-reference.dtb \
 	sh73a0-kzm9g.dtb \
@@ -212,8 +232,10 @@
 	r8a73a4-ape6evm.dtb \
 	r8a73a4-ape6evm-reference.dtb \
 	sh7372-mackerel.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb
+dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_sockit.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
 	spear1340-evb.dtb
@@ -235,6 +257,7 @@
 	sun5i-a13-olinuxino.dtb \
 	sun6i-a31-colombus.dtb \
 	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -249,7 +272,8 @@
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
-	tegra114-dalmore.dtb
+	tegra114-dalmore.dtb \
+	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
 dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
new file mode 100644
index 0000000..b4f95c2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -0,0 +1,16 @@
+/*
+ * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-igep0033.dtsi"
+
+/ {
+	model = "IGEP COM AM335x on AQUILA Expansion";
+	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 2f66ded..e3f27ec 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -21,145 +21,6 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb-phy@47401b00 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-
-			usb@47401800 {
-				status = "okay";
-				dr_mode = "host";
-			};
-
-			dma-controller@07402000  {
-				status = "okay";
-			};
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@24 {
-				reg = <0x24>;
-			};
-
-		};
-	};
-
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
@@ -183,15 +44,182 @@
 		led@4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
 		led@5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
 };
 
 /include/ "tps65217.dtsi"
@@ -260,3 +288,12 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 };
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 7993c48..94ee427 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -9,3 +9,21 @@
 
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo3_reg>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 197cadf..6b71ad9 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -15,3 +15,64 @@
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+	ti,vcc-aux-disable-is-sleep;
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+/ {
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e8ec875..9874294 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -24,324 +24,6 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-		matrix_keypad_s0: matrix_keypad_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-			>;
-		};
-
-		volume_keys_s0: volume_keys_s0 {
-			pinctrl-single,pins = <
-				0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-				0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		i2c1_pins: pinmux_i2c1_pins {
-			pinctrl-single,pins = <
-				0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-				0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		nandflash_pins_s0: nandflash_pins_s0 {
-			pinctrl-single,pins = <
-				0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		ecap0_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@2d {
-				reg = <0x2d>;
-			};
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb-phy@47401b00 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-
-			usb@47401800 {
-				status = "okay";
-				dr_mode = "host";
-			};
-
-			dma-controller@07402000  {
-				status = "okay";
-			};
-		};
-
-		i2c1: i2c@4802a000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins>;
-
-			status = "okay";
-			clock-frequency = <100000>;
-
-			lis331dlh: lis331dlh@18 {
-				compatible = "st,lis331dlh", "st,lis3lv02d";
-				reg = <0x18>;
-				Vdd-supply = <&lis3_reg>;
-				Vdd_IO-supply = <&lis3_reg>;
-
-				st,click-single-x;
-				st,click-single-y;
-				st,click-single-z;
-				st,click-thresh-x = <10>;
-				st,click-thresh-y = <10>;
-				st,click-thresh-z = <10>;
-				st,irq1-click;
-				st,irq2-click;
-				st,wakeup-x-lo;
-				st,wakeup-x-hi;
-				st,wakeup-y-lo;
-				st,wakeup-y-hi;
-				st,wakeup-z-lo;
-				st,wakeup-z-hi;
-				st,min-limit-x = <120>;
-				st,min-limit-y = <120>;
-				st,min-limit-z = <140>;
-				st,max-limit-x = <550>;
-				st,max-limit-y = <550>;
-				st,max-limit-z = <750>;
-			};
-
-			tsl2550: tsl2550@39 {
-				compatible = "taos,tsl2550";
-				reg = <0x39>;
-			};
-
-			tmp275: tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-		elm: elm@48080000 {
-			status = "okay";
-		};
-
-		epwmss0: epwmss@48300000 {
-			status = "okay";
-
-			ecap0: ecap@48300100 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&ecap0_pins>;
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&nandflash_pins_s0>;
-			ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-			nand@0,0 {
-				reg = <0 0 0>; /* CS0, offset 0 */
-				nand-bus-width = <8>;
-				ti,nand-ecc-opt = "bch8";
-				gpmc,device-nand = "true";
-				gpmc,device-width = <1>;
-				gpmc,sync-clk-ps = <0>;
-				gpmc,cs-on-ns = <0>;
-				gpmc,cs-rd-off-ns = <44>;
-				gpmc,cs-wr-off-ns = <44>;
-				gpmc,adv-on-ns = <6>;
-				gpmc,adv-rd-off-ns = <34>;
-				gpmc,adv-wr-off-ns = <44>;
-				gpmc,we-on-ns = <0>;
-				gpmc,we-off-ns = <40>;
-				gpmc,oe-on-ns = <0>;
-				gpmc,oe-off-ns = <54>;
-				gpmc,access-ns = <64>;
-				gpmc,rd-cycle-ns = <82>;
-				gpmc,wr-cycle-ns = <82>;
-				gpmc,wait-on-read = "true";
-				gpmc,wait-on-write = "true";
-				gpmc,bus-turnaround-ns = <0>;
-				gpmc,cycle2cycle-delay-ns = <0>;
-				gpmc,clk-activation-ns = <0>;
-				gpmc,wait-monitoring-ns = <0>;
-				gpmc,wr-access-ns = <40>;
-				gpmc,wr-data-mux-bus-ns = <0>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				elm_id = <&elm>;
-
-				/* MTD partition table */
-				partition@0 {
-					label = "SPL1";
-					reg = <0x00000000 0x000020000>;
-				};
-
-				partition@1 {
-					label = "SPL2";
-					reg = <0x00020000 0x00020000>;
-				};
-
-				partition@2 {
-					label = "SPL3";
-					reg = <0x00040000 0x00020000>;
-				};
-
-				partition@3 {
-					label = "SPL4";
-					reg = <0x00060000 0x00020000>;
-				};
-
-				partition@4 {
-					label = "U-boot";
-					reg = <0x00080000 0x001e0000>;
-				};
-
-				partition@5 {
-					label = "environment";
-					reg = <0x00260000 0x00020000>;
-				};
-
-				partition@6 {
-					label = "Kernel";
-					reg = <0x00280000 0x00500000>;
-				};
-
-				partition@7 {
-					label = "File-System";
-					reg = <0x00780000 0x0F880000>;
-				};
-			};
-		};
-	};
-
 	vbat: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -403,10 +85,447 @@
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			800x480p62 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <12000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
+
+	matrix_keypad_s0: matrix_keypad_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	volume_keys_s0: volume_keys_s0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+		>;
+	};
+
+	am335x_evm_audio_pins: am335x_evm_audio_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tsl2550: tsl2550@39 {
+		compatible = "taos,tsl2550";
+		reg = <0x39>;
+	};
+
+	tmp275: tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@48300100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL1";
+			reg = <0x00000000 0x000020000>;
+		};
+
+		partition@1 {
+			label = "SPL2";
+			reg = <0x00020000 0x00020000>;
+		};
+
+		partition@2 {
+			label = "SPL3";
+			reg = <0x00040000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "SPL4";
+			reg = <0x00060000 0x00020000>;
+		};
+
+		partition@4 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@5 {
+			label = "environment";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@6 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@7 {
+			label = "File-System";
+			reg = <0x00780000 0x0F880000>;
+		};
+	};
 };
 
 #include "tps65910.dtsi"
 
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&am335x_evm_audio_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+};
+
 &tps {
 	vcc1-supply = <&vbat>;
 	vcc2-supply = <&vbat>;
@@ -477,6 +596,8 @@
 		};
 
 		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 	};
@@ -517,3 +638,17 @@
 		ti,adc-channels = <4 5 6 7>;
 	};
 };
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 4f339fa..03febf8 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -31,210 +31,6 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-				0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-				0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-				0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-			>;
-		};
-
-		gpio_keys_s0: gpio_keys_s0 {
-			pinctrl-single,pins = <
-				0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-				0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-				0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-				0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		ecap2_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-				/* Slave 2 */
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-				0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-				0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-				0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-				/* Slave 2 reset value*/
-				0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@2d {
-				reg = <0x2d>;
-			};
-
-			lis331dlh: lis331dlh@18 {
-				compatible = "st,lis331dlh", "st,lis3lv02d";
-				reg = <0x18>;
-				Vdd-supply = <&lis3_reg>;
-				Vdd_IO-supply = <&lis3_reg>;
-
-				st,click-single-x;
-				st,click-single-y;
-				st,click-single-z;
-				st,click-thresh-x = <10>;
-				st,click-thresh-y = <10>;
-				st,click-thresh-z = <10>;
-				st,irq1-click;
-				st,irq2-click;
-				st,wakeup-x-lo;
-				st,wakeup-x-hi;
-				st,wakeup-y-lo;
-				st,wakeup-y-hi;
-				st,wakeup-z-lo;
-				st,wakeup-z-hi;
-				st,min-limit-x = <120>;
-				st,min-limit-y = <120>;
-				st,min-limit-z = <140>;
-				st,max-limit-x = <550>;
-				st,max-limit-y = <550>;
-				st,max-limit-z = <750>;
-			};
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			status = "okay";
-
-			ecap2: ecap@48304100 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&ecap2_pins>;
-			};
-		};
-	};
-
 	vbat: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -319,6 +115,240 @@
 		brightness-levels = <0 58 61 66 75 90 125 170 255>;
 		default-brightness-level = <8>;
 	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVMSK";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <24576000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+		>;
+	};
+
+	gpio_keys_s0: gpio_keys_s0 {
+		pinctrl-single,pins = <
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	ecap2_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+};
+
+&epwmss2 {
+	status = "okay";
+
+	ecap2: ecap@48304100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+	};
 };
 
 #include "tps65910.dtsi"
@@ -393,6 +423,8 @@
 		};
 
 		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 	};
@@ -419,3 +451,37 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii-txid";
 };
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
+
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
new file mode 100644
index 0000000..6196244
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -0,0 +1,278 @@
+/*
+ * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "com:green:user";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+		>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL";
+			reg = <0x00000000 0x000080000>;
+		};
+
+		partition@1 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@2 {
+			label = "U-Boot Env";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@4 {
+			label = "File System";
+			reg = <0x00780000 0x007880000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
new file mode 100644
index 0000000..9907b49
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Newflow AM335x NanoBone";
+	compatible = "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "nanobone:green:usr1";
+			gpios = <&gpio1 5 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&misc_pins>;
+
+	misc_pins: misc_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+		>;
+	};
+
+	gpmc_pins: gpmc_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
+			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
+			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
+			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
+			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
+			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
+			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
+			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
+
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
+			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
+			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
+
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
+
+			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: uart1_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
+			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+		>;
+	};
+
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	uart4_pins: uart4_pins {
+		pinctrl-single,pins = <
+			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+		>;
+	};
+
+	uart5_pins: uart5_pins {
+		pinctrl-single,pins = <
+			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+		>;
+	};
+
+	mmc1_pins: mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	gpio@20 {
+		compatible = "mcp,mcp23017";
+		reg = <0x20>;
+	};
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom@53 {
+		compatible = "mcp,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	compatible = "ti,am3352-gpmc";
+	ti,hwmods = "gpmc";
+	status = "okay";
+	gpmc,num-waitpins = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
+
+	nor@0,0 {
+		reg = <0 0x00000000 0x08000000>;
+		compatible = "cfi-flash";
+		linux,mtd-name = "spansion,s29gl010p11t";
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <10>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,oe-on-ns = <40>;
+		gpmc,oe-off-ns = <160>;
+		gpmc,we-on-ns = <40>;
+		gpmc,we-off-ns = <160>;
+		gpmc,rd-cycle-ns = <160>;
+		gpmc,wr-cycle-ns = <160>;
+		gpmc,access-ns = <150>;
+		gpmc,page-burst-access-ns = <10>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <20>;
+		gpmc,wr-data-mux-bus-ns = <70>;
+		gpmc,wr-access-ns = <80>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		MTD partition table
+		===================
+		+------------+-->0x00000000-> U-Boot start
+		|            |
+		|            |-->0x000BFFFF-> U-Boot end
+		|            |-->0x000C0000-> ENV1 start
+		|            |
+		|            |-->0x000DFFFF-> ENV1 end
+		|            |-->0x000E0000-> ENV2 start
+		|            |
+		|            |-->0x000FFFFF-> ENV2 end
+		|            |-->0x00100000-> Kernel start
+		|            |
+		|            |-->0x004FFFFF-> Kernel end
+		|            |-->0x00500000-> File system start
+		|            |
+		|            |-->0x014FFFFF-> File system end
+		|            |-->0x01500000-> User data start
+		|            |
+		|            |-->0x03FFFFFF-> User data end
+		|            |-->0x04000000-> Data storage start
+		|            |
+		+------------+-->0x08000000-> NOR end (Free end)
+		*/
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@1 {
+			label = "env1";
+			reg = <0x000c0000 0x00020000>; /* 128KB */
+		};
+
+		partition@2 {
+			label = "env2";
+			reg = <0x000e0000 0x00020000>; /* 128KB */
+		};
+
+		partition@3 {
+			label = "kernel";
+			reg = <0x00100000 0x00400000>; /* 4MB */
+		};
+
+		partition@4 {
+			label = "rootfs";
+			reg = <0x00500000 0x01000000>; /* 16MB */
+		};
+
+		partition@5 {
+			label = "user";
+			reg = <0x01500000 0x02b00000>; /* 43MB */
+		};
+
+		partition@6 {
+			label = "data";
+			reg = <0x04000000 0x04000000>; /* 64MB */
+		};
+	};
+};
+
+&mac {
+	dual_emac = <1>;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo4_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 8 0>;
+	wp-gpios = <&gpio3 18 0>;
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* +1.5V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1450000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f9c5da9..fcb9c8e 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -18,6 +18,9 @@
 	interrupt-parent = <&intc>;
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -30,6 +33,8 @@
 		usb1 = &usb1;
 		phy0 = &usb0_phy;
 		phy1 = &usb1_phy;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	cpus {
@@ -57,6 +62,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -100,13 +110,25 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+			dma-channels = <64>;
+			ti,edma-regions = <4>;
+			ti,edma-slots = <256>;
+		};
+
 		gpio0: gpio@44e07000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x44e07000 0x1000>;
 			interrupts = <96>;
 		};
@@ -117,7 +139,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x4804c000 0x1000>;
 			interrupts = <98>;
 		};
@@ -128,7 +150,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x481ac000 0x1000>;
 			interrupts = <32>;
 		};
@@ -139,7 +161,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x481ae000 0x1000>;
 			interrupts = <62>;
 		};
@@ -228,6 +250,50 @@
 			status = "disabled";
 		};
 
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			ti,needs-special-hs-handling;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <64>;
+			interrupt-parent = <&intc>;
+			reg = <0x48060000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <28>;
+			interrupt-parent = <&intc>;
+			reg = <0x481d8000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+			status = "disabled";
+		};
+
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		wdt2: wdt@44e35000 {
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
@@ -323,6 +389,11 @@
 			interrupts = <65>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi0";
+			dmas = <&edma 16
+				&edma 17
+				&edma 18
+				&edma 19>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
 
@@ -334,6 +405,11 @@
 			interrupts = <125>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi1";
+			dmas = <&edma 42
+				&edma 43
+				&edma 44
+				&edma 45>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
 
@@ -346,7 +422,7 @@
 			ti,hwmods = "usb_otg_hs";
 			status = "disabled";
 
-			ctrl_mod: control@44e10000 {
+			usb_ctrl_mod: control@44e10000 {
 				compatible = "ti,am335x-usb-ctrl-module";
 				reg = <0x44e10620 0x10
 					0x44e10648 0x4>;
@@ -359,7 +435,7 @@
 				reg = <0x47401300 0x100>;
 				reg-names = "phy";
 				status = "disabled";
-				ti,ctrl_mod = <&ctrl_mod>;
+				ti,ctrl_mod = <&usb_ctrl_mod>;
 			};
 
 			usb0: usb@47401000 {
@@ -407,7 +483,7 @@
 				reg = <0x47401b00 0x100>;
 				reg-names = "phy";
 				status = "disabled";
-				ti,ctrl_mod = <&ctrl_mod>;
+				ti,ctrl_mod = <&usb_ctrl_mod>;
 			};
 
 			usb1: usb@47401800 {
@@ -607,6 +683,7 @@
 			reg = <0x44d00000 0x4000	/* M3 UMEM */
 			       0x44d80000 0x2000>;	/* M3 DMEM */
 			ti,hwmods = "wkup_m3";
+			ti,no-reset-on-init;
 		};
 
 		elm: elm@48080000 {
@@ -617,6 +694,15 @@
 			status = "disabled";
 		};
 
+		lcdc: lcdc@4830e000 {
+			compatible = "ti,am33xx-tilcdc";
+			reg = <0x4830e000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <36>;
+			ti,hwmods = "lcdc";
+			status = "disabled";
+		};
+
 		tscadc: tscadc@44e0d000 {
 			compatible = "ti,am3359-tscadc";
 			reg = <0x44e0d000 0x1000>;
@@ -637,6 +723,7 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
 			gpmc,num-cs = <7>;
@@ -645,5 +732,59 @@
 			#size-cells = <1>;
 			status = "disabled";
 		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap4-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x200>;
+			interrupts = <109>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+		};
+
+		aes: aes@53500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53500000 0xa0>;
+			interrupts = <103>;
+			dmas = <&edma 6>,
+			       <&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+				<&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+				<&edma 11>;
+			dma-names = "tx", "rx";
+		};
+
+		rng: rng@48310000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48310000 0x2000>;
+			interrupts = <111>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ddc1df7..974d103 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -18,12 +18,21 @@
 
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 		serial0 = &uart0;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -35,16 +44,100 @@
 		      <0x48240100 0x0100>;
 	};
 
+	l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x31c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
 	ocp {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
+		ti,hwmods = "l3_main";
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <64>;
+			ti,edma-regions = <4>;
+			ti,edma-slots = <256>;
+		};
 
 		uart0: serial@44e09000 {
 			compatible = "ti,am4372-uart","ti,omap2-uart";
 			reg = <0x44e09000 0x2000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48022000 0x2000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			status = "disabled";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48024000 0x2000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			status = "disabled";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a6000 0x2000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a8000 0x2000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481aa000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			ti,mbox-names = "wkup_m3";
+			ti,mbox-data = <0 0 0 0>;
+			status = "disabled";
 		};
 
 		timer1: timer@44e31000 {
@@ -52,17 +145,523 @@
 			reg = <0x44e31000 0x400>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			ti,timer-alwon;
+			ti,hwmods = "timer1";
 		};
 
 		timer2: timer@48040000  {
 			compatible = "ti,am4372-timer","ti,am335x-timer";
 			reg = <0x48040000  0x400>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+			status = "disabled";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer4";
+			status = "disabled";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer5";
+			status = "disabled";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer6";
+			status = "disabled";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer7";
+			status = "disabled";
+		};
+
+		timer8: timer@481c1000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x481c1000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			status = "disabled";
+		};
+
+		timer9: timer@4833d000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833d000 0x400>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			status = "disabled";
+		};
+
+		timer10: timer@4833f000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833f000 0x400>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			status = "disabled";
+		};
+
+		timer11: timer@48341000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48341000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			status = "disabled";
 		};
 
 		counter32k: counter@44e86000 {
 			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
 			reg = <0x44e86000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtc";
+			status = "disabled";
+		};
+
+		wdt@44e35000 {
+			compatible = "ti,am4372-wdt","ti,omap3-wdt";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x44e07000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio1";
+			status = "disabled";
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio2";
+			status = "disabled";
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ac000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio3";
+			status = "disabled";
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ae000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio4";
+			status = "disabled";
+		};
+
+		gpio4: gpio@48320000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48320000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio5";
+			status = "disabled";
+		};
+
+		gpio5: gpio@48322000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48322000 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio6";
+			status = "disabled";
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48030000 0x400>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x1000>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x481d8000 0x1000>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x47810000 0x1000>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a0000 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@481a2000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a2000 0x400>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@481a4000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a4000 0x400>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@48345000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48345000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi4";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,am4372-cpsw","ti,cpsw";
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "cpgmac0";
+			status = "disabled";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				reg = <0x4a101000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss0";
+			status = "disabled";
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss1";
+			status = "disabled";
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss2";
+			status = "disabled";
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		epwmss3: epwmss@48306000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48306000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss3";
+			status = "disabled";
+
+			ehrpwm3: ehrpwm@48306200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48306200 0x80>;
+				ti,hwmods = "ehrpwm3";
+				status = "disabled";
+			};
+		};
+
+		epwmss4: epwmss@48308000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48308000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss4";
+			status = "disabled";
+
+			ehrpwm4: ehrpwm@48308200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48308200 0x80>;
+				ti,hwmods = "ehrpwm4";
+				status = "disabled";
+			};
+		};
+
+		epwmss5: epwmss@4830a000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x4830a000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss5";
+			status = "disabled";
+
+			ehrpwm5: ehrpwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x4830a200 0x80>;
+				ti,hwmods = "ehrpwm5";
+				status = "disabled";
+			};
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x300>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aes: aes@53501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53501000 0xa0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 6
+				&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@53701000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x53701000 0xa0>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 34
+				&edma 33>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+			       <&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+			       <&edma 11>;
+			dma-names = "tx", "rx";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 74174d4..fbf9c4c 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -11,8 +11,176 @@
 /dts-v1/;
 
 #include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
 	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <2>;
+
+			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+			linux,keymap = <0x00000201	/* P1 */
+				0x01000204	/* P4 */
+				0x02000207	/* P7 */
+				0x0300020a	/* NUMERIC_STAR */
+				0x00010202	/* P2 */
+				0x01010205	/* P5 */
+				0x02010208	/* P8 */
+				0x03010200	/* P0 */
+				0x00020203	/* P3 */
+				0x01020206	/* P6 */
+				0x02020209	/* P9 */
+				0x0302020b	/* NUMERIC_POUND */
+				0x00030067	/* UP */
+				0x0103006a	/* RIGHT */
+				0x0203006c	/* DOWN */
+				0x03030069>;	/* LEFT */
+		};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <16>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_ts";
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 0>;
+
+		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+		x-size = <1024>;
+		y-size = <768>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
new file mode 100644
index 0000000..b0b32f5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -0,0 +1,193 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 104
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 104";
+	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to Marvell 88SE9215 SATA controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+
+			pinctrl {
+				poweroff: poweroff {
+					marvell,pins = "mpp60";
+					marvell,function = "gpio";
+				};
+
+				backup_key_pin: backup-key-pin {
+					marvell,pins = "mpp52";
+					marvell,function = "gpio";
+				};
+
+				power_key_pin: power-key-pin {
+					marvell,pins = "mpp62";
+					marvell,function = "gpio";
+				};
+
+				backup_led_pin: backup-led-pin {
+					marvell,pins = "mpp63";
+					marvell,function = "gpo";
+				};
+
+				power_led_pin: power-led-pin {
+					marvell,pins = "mpp64";
+					marvell,function = "gpio";
+				};
+
+				reset_key_pin: reset-key-pin {
+					marvell,pins = "mpp65";
+					marvell,function = "gpio";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+
+	       g762_clk: fixedclk {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&backup_led_pin &power_led_pin>;
+		pinctrl-names = "default";
+
+		blue_backup_led {
+			label = "rn104:blue:backup";
+			gpios = <&gpio1 31 0>;   /* GPIO 63 Active High */
+			default-state = "off";
+		};
+
+		blue_power_led {
+			label = "rn104:blue:pwr";
+			gpios = <&gpio2 0 1>;    /* GPIO 64 Active Low */
+			linux,default-trigger = "keep";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&backup_key_pin
+			     &power_key_pin
+			     &reset_key_pin>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Backup Button";
+			linux,code = <133>;     /* KEY_COPY */
+			gpios = <&gpio1 20 1>;
+		};
+
+		button@2 {
+			label = "Power Button";
+			linux,code = <116>;     /* KEY_POWER */
+			gpios = <&gpio1 30 0>;
+		};
+
+		button@3 {
+			label = "Reset Button";
+			linux,code = <0x198>;   /* KEY_RESTART */
+			gpios = <&gpio2 1 1>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 28 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 1de2dae..00d6a79 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -113,6 +113,7 @@
 				#interrupt-cells = <1>;
 				#size-cells = <1>;
 				interrupt-controller;
+				msi-controller;
 			};
 
 			coherency-fabric@20200 {
@@ -137,6 +138,14 @@
 				status = "disabled";
 			};
 
+			coredivclk: corediv-clock@18740 {
+				compatible = "marvell,armada-370-corediv-clock";
+				reg = <0x18740 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
 			timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
@@ -176,7 +185,6 @@
 
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <31>;
@@ -187,7 +195,6 @@
 
 			i2c1: i2c@11100 {
 				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <32>;
@@ -252,4 +259,13 @@
 
 		};
 	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
  };
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index e134d7a..7a4b82e 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -44,6 +44,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			msi-parent = <&mpic>;
 			bus-range = <0x00 0xff>;
 
 			ranges =
@@ -218,6 +219,14 @@
 				};
 			};
 
+			i2c0: i2c@11000 {
+				reg = <0x11000 0x20>;
+			};
+
+			i2c1: i2c@11100 {
+				reg = <0x11100 0x20>;
+			};
+
 			usb@50000 {
 				clocks = <&coreclk 0>;
 			};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
new file mode 100644
index 0000000..e47c49e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -0,0 +1,75 @@
+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 0358a33..3f5e612 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -57,6 +57,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			msi-parent = <&mpic>;
 			bus-range = <0x00 0xff>;
 
 			ranges =
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 0e82c50..3e9fd13 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -58,6 +58,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			msi-parent = <&mpic>;
 			bus-range = <0x00 0xff>;
 
 			ranges =
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index e82c1b8..31ba6d8 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -74,6 +74,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			msi-parent = <&mpic>;
 			bus-range = <0x00 0xff>;
 
 			ranges =
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 3058522..281c644 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -147,6 +147,16 @@
 				};
 			};
 
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x100>;
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x100>;
+			};
+
 			usb@50000 {
 				clocks = <&gateclk 18>;
 			};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 1373546..cb2c010 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -96,7 +96,6 @@
 			};
 
 			spi0: spi@fffc8000 {
-				status = "okay";
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
 				mtd_dataflash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index b4ec6fe..17b8799 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -7,6 +7,8 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index bebf9f5..e35c2fc 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 9fb7ffd..6224f9f 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -437,6 +437,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 27a9352..e9487f6 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -38,9 +38,18 @@
 				status = "okay";
 			};
 
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
 			i2c0: i2c@f8010000 {
 				status = "okay";
 
+				wm8904: codec@1a {
+					compatible = "wm8904";
+					reg = <0x1a>;
+				};
+
 				qt1070: keyboard@1b {
 					compatible = "qt1070";
 					reg = <0x1b>;
@@ -82,6 +91,13 @@
 							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
 				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {
@@ -142,4 +158,22 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 49e94ab..c255421 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -7,6 +7,9 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X25 SoC";
@@ -22,27 +25,6 @@
 				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
-
-				macb1 {
-					pinctrl_macb1_rmii: macb1_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
-							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
-							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
-							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
-							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
-							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
-							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
-							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
-							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
-							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
-					};
-				};
-			};
-
-			macb1: ethernet@f8030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb1_rmii>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 1a3d525..8eac66c 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e74dc15..40267a1 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -206,29 +206,6 @@
 					};
 				};
 
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
-							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC23 periph B */
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
-					};
-
-					pinctrl_usart3_sck: usart3_sck-0 {
-						atmel,pins =
-							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC26 periph B */
-					};
-				};
-
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
@@ -277,34 +254,6 @@
 					};
 				};
 
-				macb0 {
-					pinctrl_macb0_rmii: macb0_rmii-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
-							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
-					};
-
-					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
-							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
-					};
-				};
-
 				mmc0 {
 					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
@@ -610,22 +559,6 @@
 				status = "disabled";
 			};
 
-			macb0: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_rmii>;
-				status = "disabled";
-			};
-
-			macb1: ethernet@f8030000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf8030000 0x100>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
new file mode 100644
index 0000000..55731ff
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -0,0 +1,56 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
new file mode 100644
index 0000000..77425a6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
new file mode 100644
index 0000000..2347e95
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -0,0 +1,51 @@
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC23 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
+					};
+				};
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 6db4f81..a49032c 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -65,6 +65,11 @@
 				compatible = "sirf,prima2-rsc";
 				reg = <0x88020000 0x1000>;
 			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+			};
 		};
 
 		mem-iobg {
@@ -75,10 +80,17 @@
 
 			memory-controller@90000000 {
 				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
+				reg = <0x90000000 0x2000>;
 				interrupts = <27>;
 				clocks = <&clks 5>;
 			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
 		};
 
 		disp-iobg {
@@ -120,6 +132,20 @@
 			};
 		};
 
+		graphics2d-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			ble@a0000000 {
+				compatible = "sirf,atlas6-ble";
+				reg = <0xa0000000 0x2000>;
+				interrupts = <5>;
+				clocks = <&clks 33>;
+			};
+		};
+
 		dsp-iobg {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -271,6 +297,11 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 20>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 9d36eb4..23cd16d 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -40,6 +40,7 @@
 
 	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 0>;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 05a5aab..b0c0610 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -49,6 +49,36 @@
 		reg-io-width = <4>;
 	};
 
+	uart@3e001000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e003000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e003000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
 	L2: l2-cache {
 		compatible = "brcm,bcm11351-a2-pl310-cache";
 		reg = <0x3ff20000 0x1000>;
@@ -68,31 +98,47 @@
 		clock-frequency = <32768>;
 	};
 
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
 	sdio1: sdio@3f180000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
-		interrupts = <0x0 77 0x4>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
 	sdio2: sdio@3f190000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
-		interrupts = <0x0 76 0x4>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
 	sdio3: sdio@3f1a0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
-		interrupts = <0x0 74 0x4>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
 	sdio4: sdio@3f1b0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
-		interrupts = <0x0 73 0x4>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 96ae67a..08e47c2 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -40,6 +40,7 @@
 
 	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 0>;
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
index 61a8062..50c0d69 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dts
+++ b/arch/arm/boot/dts/dove-cm-a510.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "Compulab CM-A510";
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 022646e..8349a24 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "SolidRun CuBox";
@@ -99,19 +99,13 @@
 			silabs,pll-master;
 		};
 
-		clkout1 {
-			reg = <1>;
+		clkout2 {
+			reg = <2>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
 			silabs,clock-source = <0>;
 			silabs,pll-master;
 		};
-
-		clkout2 {
-			reg = <2>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-		};
 	};
 };
 
@@ -132,3 +126,11 @@
 		reg = <0>;
 	};
 };
+
+&audio1 {
+	status = "okay";
+	clocks = <&gate_clk 13>, <&si5351 2>;
+	clock-names = "internal", "extclk";
+	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
index e2222ce..c11d363 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "Globalscale D2Plug";
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
new file mode 100644
index 0000000..f5f59bb
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -0,0 +1,103 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 0>;
+			pinctrl-0 = <&pmx_gpio_8>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	spi-flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie-port@0 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie-port@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
index e5a920b..bb725dc 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "Marvell DB-MV88AP510-BP Development Board";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index cc27916..113a8bc 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -1,8 +1,11 @@
 /include/ "skeleton.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		gpio0 = &gpio0;
@@ -27,482 +30,576 @@
 		marvell,tauros2-cache-features = <0>;
 	};
 
-	soc@f1000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
+	mbus {
+		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
+		#address-cells = <2>;
 		#size-cells = <1>;
-		interrupt-parent = <&intc>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
+		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
 
-		ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
-		          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
-		          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
-		          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
-		          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
-		          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
+			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
+			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
+			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
+			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
 
-		timer: timer@20300 {
-			compatible = "marvell,orion-timer";
-			reg = <0x20300 0x20>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <1>, <2>;
-			clocks = <&core_clk 0>;
-		};
-
-		intc: main-interrupt-ctrl@20200 {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20200 0x10>, <0x20210 0x10>;
-		};
-
-		bridge_intc: bridge-interrupt-ctrl@20110 {
-			compatible = "marvell,orion-bridge-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20110 0x8>;
-			interrupts = <0>;
-			marvell,#interrupts = <5>;
-		};
-
-		core_clk: core-clocks@d0214 {
-			compatible = "marvell,dove-core-clock";
-			reg = <0xd0214 0x4>;
-			#clock-cells = <1>;
-		};
-
-		gate_clk: clock-gating-ctrl@d0038 {
-			compatible = "marvell,dove-gating-clock";
-			reg = <0xd0038 0x4>;
-			clocks = <&core_clk 0>;
-			#clock-cells = <1>;
-		};
-
-		thermal: thermal-diode@d001c {
-			compatible = "marvell,dove-thermal";
-			reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-		};
-
-		uart0: serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <7>;
-			clocks = <&core_clk 0>;
+		pcie: pcie-controller {
+			compatible = "marvell,dove-pcie";
 			status = "disabled";
-		};
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
 
-		uart1: serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <8>;
-			clocks = <&core_clk 0>;
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
+			msi-parent = <&intc>;
+			bus-range = <0x00 0xff>;
 
-		uart2: serial@12200 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <9>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
+			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
+				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
+				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
+				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
+				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
 
-		uart3: serial@12300 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <10>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			pcie-port@0 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				clocks = <&gate_clk 4>;
+				marvell,pcie-port = <0>;
 
-		gpio0: gpio-ctrl@d0400 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xd0400 0x20>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <12>, <13>, <14>, <60>;
-		};
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
 
-		gpio1: gpio-ctrl@d0420 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xd0420 0x20>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <61>;
-		};
-
-		gpio2: gpio-ctrl@e8400 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xe8400 0x0c>;
-			ngpios = <8>;
-		};
-
-		pinctrl: pin-ctrl@d0200 {
-			compatible = "marvell,dove-pinctrl";
-			reg = <0xd0200 0x10>;
-			clocks = <&gate_clk 22>;
-
-			pmx_gpio_0: pmx-gpio-0 {
-				marvell,pins = "mpp0";
-				marvell,function = "gpio";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 16>;
 			};
 
-			pmx_gpio_1: pmx-gpio-1 {
-				marvell,pins = "mpp1";
-				marvell,function = "gpio";
-			};
+			pcie-port@1 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				clocks = <&gate_clk 5>;
+				marvell,pcie-port = <1>;
 
-			pmx_gpio_2: pmx-gpio-2 {
-				marvell,pins = "mpp2";
-				marvell,function = "gpio";
-			};
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
 
-			pmx_gpio_3: pmx-gpio-3 {
-				marvell,pins = "mpp3";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_4: pmx-gpio-4 {
-				marvell,pins = "mpp4";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_5: pmx-gpio-5 {
-				marvell,pins = "mpp5";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_6: pmx-gpio-6 {
-				marvell,pins = "mpp6";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_7: pmx-gpio-7 {
-				marvell,pins = "mpp7";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_8: pmx-gpio-8 {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_9: pmx-gpio-9 {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_10: pmx-gpio-10 {
-				marvell,pins = "mpp10";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_11: pmx-gpio-11 {
-				marvell,pins = "mpp11";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_12: pmx-gpio-12 {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_13: pmx-gpio-13 {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_14: pmx-gpio-14 {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_15: pmx-gpio-15 {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_16: pmx-gpio-16 {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_17: pmx-gpio-17 {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_18: pmx-gpio-18 {
-				marvell,pins = "mpp18";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_19: pmx-gpio-19 {
-				marvell,pins = "mpp19";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_20: pmx-gpio-20 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_21: pmx-gpio-21 {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_camera: pmx-camera {
-				marvell,pins = "mpp_camera";
-				marvell,function = "camera";
-			};
-
-			pmx_camera_gpio: pmx-camera-gpio {
-				marvell,pins = "mpp_camera";
-				marvell,function = "gpio";
-			};
-
-			pmx_sdio0: pmx-sdio0 {
-				marvell,pins = "mpp_sdio0";
-				marvell,function = "sdio0";
-			};
-
-			pmx_sdio0_gpio: pmx-sdio0-gpio {
-				marvell,pins = "mpp_sdio0";
-				marvell,function = "gpio";
-			};
-
-			pmx_sdio1: pmx-sdio1 {
-				marvell,pins = "mpp_sdio1";
-				marvell,function = "sdio1";
-			};
-
-			pmx_sdio1_gpio: pmx-sdio1-gpio {
-				marvell,pins = "mpp_sdio1";
-				marvell,function = "gpio";
-			};
-
-			pmx_audio1_gpio: pmx-audio1-gpio {
-				marvell,pins = "mpp_audio1";
-				marvell,function = "gpio";
-			};
-
-			pmx_spi0: pmx-spi0 {
-				marvell,pins = "mpp_spi0";
-				marvell,function = "spi0";
-			};
-
-			pmx_spi0_gpio: pmx-spi0-gpio {
-				marvell,pins = "mpp_spi0";
-				marvell,function = "gpio";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp_uart1";
-				marvell,function = "uart1";
-			};
-
-			pmx_uart1_gpio: pmx-uart1-gpio {
-				marvell,pins = "mpp_uart1";
-				marvell,function = "gpio";
-			};
-
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp_nand";
-				marvell,function = "nand";
-			};
-
-			pmx_nand_gpo: pmx-nand-gpo {
-				marvell,pins = "mpp_nand";
-				marvell,function = "gpo";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 18>;
 			};
 		};
 
-		spi0: spi-ctrl@10600 {
-			compatible = "marvell,orion-spi";
+		internal-regs {
+			compatible = "simple-bus";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <6>;
-			reg = <0x10600 0x28>;
-			clocks = <&core_clk 0>;
-			pinctrl-0 = <&pmx_spi0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
+			#size-cells = <1>;
+			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
+				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
+				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
+				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-		spi1: spi-ctrl@14600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <5>;
-			reg = <0x14600 0x28>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c-ctrl@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <11>;
-			clock-frequency = <400000>;
-			timeout-ms = <1000>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		ehci0: usb-host@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <24>;
-			clocks = <&gate_clk 0>;
-			status = "okay";
-		};
-
-		ehci1: usb-host@51000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x51000 0x1000>;
-			interrupts = <25>;
-			clocks = <&gate_clk 1>;
-			status = "okay";
-		};
-
-		sdio0: sdio-host@92000 {
-			compatible = "marvell,dove-sdhci";
-			reg = <0x92000 0x100>;
-			interrupts = <35>, <37>;
-			clocks = <&gate_clk 8>;
-			pinctrl-0 = <&pmx_sdio0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		sdio1: sdio-host@90000 {
-			compatible = "marvell,dove-sdhci";
-			reg = <0x90000 0x100>;
-			interrupts = <36>, <38>;
-			clocks = <&gate_clk 9>;
-			pinctrl-0 = <&pmx_sdio1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		sata0: sata-host@a0000 {
-			compatible = "marvell,orion-sata";
-			reg = <0xa0000 0x2400>;
-			interrupts = <62>;
-			clocks = <&gate_clk 3>;
-			nr-ports = <1>;
-			status = "disabled";
-		};
-
-		rtc: real-time-clock@d8500 {
-			compatible = "marvell,orion-rtc";
-			reg = <0xd8500 0x20>;
-		};
-
-		crypto: crypto-engine@30000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x30000 0x10000>,
-			      <0xc8000000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <31>;
-			clocks = <&gate_clk 15>;
-			status = "okay";
-		};
-
-		xor0: dma-engine@60800 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60800 0x100
-			       0x60a00 0x100>;
-			clocks = <&gate_clk 23>;
-			status = "okay";
-
-			channel0 {
-				interrupts = <39>;
-				dmacap,memcpy;
-				dmacap,xor;
+			mbusc: mbus-ctrl@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x80>, <0x800100 0x8>;
 			};
 
-			channel1 {
-				interrupts = <40>;
-				dmacap,memset;
-				dmacap,memcpy;
-				dmacap,xor;
-			};
-		};
-
-		xor1: dma-engine@60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60b00 0x100>;
-			clocks = <&gate_clk 24>;
-			status = "okay";
-
-			channel0 {
-				interrupts = <42>;
-				dmacap,memcpy;
-				dmacap,xor;
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
 			};
 
-			channel1 {
-				interrupts = <43>;
-				dmacap,memset;
-				dmacap,memcpy;
-				dmacap,xor;
+			intc: main-interrupt-ctrl@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x10>, <0x20210 0x10>;
 			};
-		};
 
-		mdio: mdio-bus@72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <30>;
-			clocks = <&gate_clk 2>;
-			status = "disabled";
-
-			ethphy: ethernet-phy {
-				device-type = "ethernet-phy";
-				/* set phy address in board file */
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <5>;
 			};
-		};
 
-		eth: ethernet-controller@72000 {
-			compatible = "marvell,orion-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72000 0x4000>;
-			clocks = <&gate_clk 2>;
-			marvell,tx-checksum-limit = <1600>;
-			status = "disabled";
+			core_clk: core-clocks@d0214 {
+				compatible = "marvell,dove-core-clock";
+				reg = <0xd0214 0x4>;
+				#clock-cells = <1>;
+			};
 
-			ethernet-port@0 {
-				device_type = "network";
-				compatible = "marvell,orion-eth-port";
-				reg = <0>;
-				interrupts = <29>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				phy-handle = <&ethphy>;
+			gate_clk: clock-gating-ctrl@d0038 {
+				compatible = "marvell,dove-gating-clock";
+				reg = <0xd0038 0x4>;
+				clocks = <&core_clk 0>;
+				#clock-cells = <1>;
+			};
+
+			thermal: thermal-diode@d001c {
+				compatible = "marvell,dove-thermal";
+				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+			};
+
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <7>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_uart1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			gpio0: gpio-ctrl@d0400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0400 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <12>, <13>, <14>, <60>;
+			};
+
+			gpio1: gpio-ctrl@d0420 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0420 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61>;
+			};
+
+			gpio2: gpio-ctrl@e8400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xe8400 0x0c>;
+				ngpios = <8>;
+			};
+
+			pinctrl: pin-ctrl@d0200 {
+				compatible = "marvell,dove-pinctrl";
+				reg = <0xd0200 0x10>;
+				clocks = <&gate_clk 22>;
+
+				pmx_gpio_0: pmx-gpio-0 {
+					marvell,pins = "mpp0";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_1: pmx-gpio-1 {
+					marvell,pins = "mpp1";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_2: pmx-gpio-2 {
+					marvell,pins = "mpp2";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_3: pmx-gpio-3 {
+					marvell,pins = "mpp3";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_4: pmx-gpio-4 {
+					marvell,pins = "mpp4";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_5: pmx-gpio-5 {
+					marvell,pins = "mpp5";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_6: pmx-gpio-6 {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_7: pmx-gpio-7 {
+					marvell,pins = "mpp7";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_8: pmx-gpio-8 {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_9: pmx-gpio-9 {
+					marvell,pins = "mpp9";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_10: pmx-gpio-10 {
+					marvell,pins = "mpp10";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_11: pmx-gpio-11 {
+					marvell,pins = "mpp11";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_12: pmx-gpio-12 {
+					marvell,pins = "mpp12";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_13: pmx-gpio-13 {
+					marvell,pins = "mpp13";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_extclk: pmx-audio1-extclk {
+					marvell,pins = "mpp13";
+					marvell,function = "audio1";
+				};
+
+				pmx_gpio_14: pmx-gpio-14 {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_15: pmx-gpio-15 {
+					marvell,pins = "mpp15";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_16: pmx-gpio-16 {
+					marvell,pins = "mpp16";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_17: pmx-gpio-17 {
+					marvell,pins = "mpp17";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_18: pmx-gpio-18 {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_19: pmx-gpio-19 {
+					marvell,pins = "mpp19";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_20: pmx-gpio-20 {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_21: pmx-gpio-21 {
+					marvell,pins = "mpp21";
+					marvell,function = "gpio";
+				};
+
+				pmx_camera: pmx-camera {
+					marvell,pins = "mpp_camera";
+					marvell,function = "camera";
+				};
+
+				pmx_camera_gpio: pmx-camera-gpio {
+					marvell,pins = "mpp_camera";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio0: pmx-sdio0 {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "sdio0";
+				};
+
+				pmx_sdio0_gpio: pmx-sdio0-gpio {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio1: pmx-sdio1 {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "sdio1";
+				};
+
+				pmx_sdio1_gpio: pmx-sdio1-gpio {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_gpio: pmx-audio1-gpio {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "i2s1/spdifo";
+				};
+
+				pmx_spi0: pmx-spi0 {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "spi0";
+				};
+
+				pmx_spi0_gpio: pmx-spi0-gpio {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "gpio";
+				};
+
+				pmx_uart1: pmx-uart1 {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "uart1";
+				};
+
+				pmx_uart1_gpio: pmx-uart1-gpio {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "gpio";
+				};
+
+				pmx_nand: pmx-nand {
+					marvell,pins = "mpp_nand";
+					marvell,function = "nand";
+				};
+
+				pmx_nand_gpo: pmx-nand-gpo {
+					marvell,pins = "mpp_nand";
+					marvell,function = "gpo";
+				};
+			};
+
+			spi0: spi-ctrl@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <6>;
+				reg = <0x10600 0x28>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_spi0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			spi1: spi-ctrl@14600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <5>;
+				reg = <0x14600 0x28>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c-ctrl@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <11>;
+				clock-frequency = <400000>;
+				timeout-ms = <1000>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			ehci0: usb-host@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <24>;
+				clocks = <&gate_clk 0>;
+				status = "okay";
+			};
+
+			ehci1: usb-host@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x1000>;
+				interrupts = <25>;
+				clocks = <&gate_clk 1>;
+				status = "okay";
+			};
+
+			sdio0: sdio-host@92000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x92000 0x100>;
+				interrupts = <35>, <37>;
+				clocks = <&gate_clk 8>;
+				pinctrl-0 = <&pmx_sdio0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sdio1: sdio-host@90000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x90000 0x100>;
+				interrupts = <36>, <38>;
+				clocks = <&gate_clk 9>;
+				pinctrl-0 = <&pmx_sdio1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sata0: sata-host@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <62>;
+				clocks = <&gate_clk 3>;
+				nr-ports = <1>;
+				status = "disabled";
+			};
+
+			rtc: real-time-clock@d8500 {
+				compatible = "marvell,orion-rtc";
+				reg = <0xd8500 0x20>;
+			};
+
+			crypto: crypto-engine@30000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x30000 0x10000>,
+				      <0xffffe000 0x800>;
+				reg-names = "regs", "sram";
+				interrupts = <31>;
+				clocks = <&gate_clk 15>;
+				status = "okay";
+			};
+
+			xor0: dma-engine@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gate_clk 23>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <39>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <40>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			xor1: dma-engine@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gate_clk 24>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <42>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <43>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <30>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				ethphy: ethernet-phy {
+					device-type = "ethernet-phy";
+					/* set phy address in board file */
+				};
+			};
+
+			eth: ethernet-ctrl@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				clocks = <&gate_clk 2>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port@0 {
+					device_type = "network";
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <29>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					phy-handle = <&ethphy>;
+				};
+			};
+
+			audio0: audio-controller@b0000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb0000 0x2210>;
+				interrupts = <19>, <20>;
+				clocks = <&gate_clk 12>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			audio1: audio-controller@b4000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb4000 0x2210>;
+				interrupts = <21>, <22>;
+				clocks = <&gate_clk 13>;
+				clock-names = "internal";
+				status = "disabled";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
new file mode 100644
index 0000000..5babba0
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra7.dtsi"
+
+/ {
+	model = "TI DRA7";
+	compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x60000000>; /* 1536 MB */
+	};
+
+	mmc2_3v3: fixedregulator-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dra7_pmx_core {
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
+			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <12500000>;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* CORE_VDD */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1030000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVAHD */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDS1V8 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_RTCIO */
+					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <3400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&mmc2_3v3>;
+	bus-width = <8>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
new file mode 100644
index 0000000..d0df4c4
--- /dev/null
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -0,0 +1,586 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "ti,dra7xx";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48211000 0x1000>,
+		      <0x48212000 0x1000>,
+		      <0x48214000 0x2000>,
+		      <0x48216000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the SOC interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2";
+		reg = <0x44000000 0x2000>,
+		      <0x44800000 0x3000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		dra7_pmx_core: pinmux@4a003400 {
+			compatible = "pinctrl-single";
+			reg = <0x4a003400 0x0464>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x3fffffff>;
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+                        status = "disabled";
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart7: serial@48420000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48420000 0x100>;
+			ti,hwmods = "uart7";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart8: serial@48422000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48422000 0x100>;
+			ti,hwmods = "uart8";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart9: serial@48424000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48424000 0x100>;
+			ti,hwmods = "uart9";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart10: serial@4ae2b000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4ae2b000 0x100>;
+			ti,hwmods = "uart10";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48820000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48820000 0x80>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@48822000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48822000 0x80>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@48824000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48824000 0x80>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48826000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48826000 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer13: timer@48828000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48828000 0x80>;
+			ti,hwmods = "timer13";
+			status = "disabled";
+		};
+
+		timer14: timer@4882a000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882a000 0x80>;
+			ti,hwmods = "timer14";
+			status = "disabled";
+		};
+
+		timer15: timer@4882c000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882c000 0x80>;
+			ti,hwmods = "timer15";
+			status = "disabled";
+		};
+
+		timer16: timer@4882e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882e000 0x80>;
+			ti,hwmods = "timer16";
+			status = "disabled";
+		};
+
+		wdt2: wdt@4ae14000 {
+			compatible = "ti,omap4-wdt";
+			reg = <0x4ae14000 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			status = "disabled";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			status = "disabled";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			status = "disabled";
+		};
+
+		i2c4: i2c@4807a000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+			status = "disabled";
+		};
+
+		i2c5: i2c@4807c000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+			status = "disabled";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+			status = "disabled";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+			status = "disabled";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index e8559b75..bc22557 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -19,6 +19,14 @@
 		bootargs = "console=ttyAMA0";
 	};
 
+	psci {
+		compatible	= "arm,psci";
+		method		= "smc";
+		cpu_suspend	= <0x84000002>;
+		cpu_off		= <0x84000004>;
+		cpu_on		= <0x84000006>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
deleted file mode 100644
index cceefda..0000000
--- a/arch/arm/boot/dts/emev2-kzm9d-reference.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Device Tree Source for the KZM9D board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-/dts-v1/;
-
-/include/ "emev2.dtsi"
-
-/ {
-	model = "EMEV2 KZM9D Board";
-	compatible = "renesas,kzm9d-reference", "renesas,emev2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	lan9220@20000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x20000000 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpio0>;
-		interrupts = <1 1>;	/* active high */
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index f92e812..861aa7d 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for the KZM9D board
  *
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2013 Renesas Solutions Corp.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -23,4 +23,35 @@
 	chosen {
 		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
 	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 1>;	/* active high */
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index caadc02..a73eeb5 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -49,6 +49,12 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	mipi_phy: video-phy@10020710 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10020710 8>;
+		#phy-cells = <1>;
+	};
+
 	pd_mfc: mfc-power-domain@10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
@@ -161,6 +167,8 @@
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 0>;
+			phy-names = "csis";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -174,6 +182,8 @@
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 2>;
+			phy-names = "csis";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 382d8c7..1a12fb2 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -32,13 +32,20 @@
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
-	mmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 0>;
-		enable-active-high;
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
 	};
 
 	tmu@100C0000 {
@@ -192,7 +199,12 @@
 				};
 
 				buck1_reg: BUCK1 {
-					regulator-name = "VDD_ARM_1.2V";
+					/*
+					* HACK: The real name is VDD_ARM_1.2V,
+					* but exynos-cpufreq does not support
+					* DT-based regulator lookup yet.
+					*/
+					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <950000>;
 					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 1c164f2..63cc571 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -290,7 +290,12 @@
 				};
 
 				varm_breg: BUCK1 {
-				     regulator-name = "VARM_1.2V_C210";
+				     /*
+				      * HACK: The real name is VARM_1.2V_C210,
+				      * but exynos-cpufreq does not support
+				      * DT-based regulator lookup yet.
+				      */
+				     regulator-name = "vdd_arm";
 				     regulator-min-microvolt = <900000>;
 				     regulator-max-microvolt = <1350000>;
 				     regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 889cdad..d2e3f5f 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -350,3 +350,7 @@
 		status = "okay";
 	};
 };
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 8768b03..d65984c 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -32,13 +32,20 @@
 		reg = <0x0203F000 0x1000>;
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 0>;
-		enable-active-high;
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
 	};
 
 	pinctrl@11000000 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index cee55fa..6845270 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -324,7 +324,14 @@
 	};
 
 	i2c@12C80000 {
-		status = "disabled";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		samsung,i2c-slave-addr = <0x50>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
 	};
 
 	i2c@12C90000 {
@@ -362,6 +369,17 @@
 		status = "disabled";
 	};
 
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos4212-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
 	i2c@121D0000 {
 		status = "disabled";
 	};
@@ -412,6 +430,10 @@
 		status = "disabled";
 	};
 
+	i2s0: i2s@03830000 {
+		status = "okay";
+	};
+
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};
@@ -482,13 +504,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		main_dc_reg: fixedregulator@1 {
+		main_dc_reg: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "MAIN_DC";
 		};
 
-		mmc_reg: voltage-regulator {
+		mmc_reg: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "VDD_33ON_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
@@ -496,8 +520,9 @@
 			enable-active-high;
 		};
 
-		reg_hdmi_en: fixedregulator@0 {
+		reg_hdmi_en: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "hdmi-en";
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 724a22f..9a49e68 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -210,21 +210,21 @@
 			samsung,pins = "gpa0-2", "gpa0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_hs_bus: i2c2-hs-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart2_data: uart2-data {
@@ -238,21 +238,21 @@
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_hs_bus: i2c3-hs-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart3_data: uart3-data {
@@ -273,14 +273,14 @@
 			samsung,pins = "gpa2-0", "gpa2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpa2-2", "gpa2-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@
 			samsung,pins = "gpb3-0", "gpb3-1";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c1_hs_bus: i2c1-hs-bus {
 			samsung,pins = "gpb3-2", "gpb3-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@
 			samsung,pins = "gpd0-2", "gpd0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		dp_hpd: dp_hpd {
 			samsung,pins = "gpx0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -649,42 +649,42 @@
 				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c2_bus: cam-i2c2-bus {
 			samsung,pins = "gpe0-6", "gpe1-0";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi1_bus: cam-spi1-bus {
 			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c1_bus: cam-i2c1-bus {
 			samsung,pins = "gpf0-2", "gpf0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c0_bus: cam-i2c0-bus {
 			samsung,pins = "gpf0-0", "gpf0-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi0_bus: cam-spi0-bus {
 			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_bayrgb_bus: cam-bayrgb-bus {
@@ -695,7 +695,7 @@
 				       "gpg2-0", "gpg2-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_port_a: cam-port-a {
@@ -704,7 +704,7 @@
 				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -756,7 +756,7 @@
 				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		c2c_txd: c2c-txd {
@@ -766,7 +766,7 @@
 				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 2538b32..f86d567 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -231,14 +231,6 @@
 		status = "okay";
 	};
 
-	i2s1: i2s@12D60000 {
-		status = "disabled";
-	};
-
-	i2s2: i2s@12D70000 {
-		status = "disabled";
-	};
-
 	sound {
 		compatible = "samsung,smdk-wm8994";
 
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index bbac42a..9db5047 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -422,6 +422,7 @@
 
 	i2s0: i2s@03830000 {
 		compatible = "samsung,s5pv210-i2s";
+		status = "disabled";
 		reg = <0x03830000 0x100>;
 		dmas = <&pdma0 10
 			&pdma0 9
@@ -438,6 +439,7 @@
 
 	i2s1: i2s@12D60000 {
 		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
 		reg = <0x12D60000 0x100>;
 		dmas = <&pdma1 12
 			&pdma1 11>;
@@ -450,6 +452,7 @@
 
 	i2s2: i2s@12D70000 {
 		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
 		reg = <0x12D70000 0x100>;
 		dmas = <&pdma0 12
 			&pdma0 11>;
@@ -615,16 +618,18 @@
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
-		clocks = <&clock 333>, <&clock 136>, <&clock 137>,
-				<&clock 333>, <&clock 333>;
+		clocks = <&clock 344>, <&clock 136>, <&clock 137>,
+				<&clock 159>, <&clock 1024>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "hdmiphy";
+				"sclk_hdmiphy", "mout_hdmi";
 	};
 
 	mixer {
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
+		clocks = <&clock 343>, <&clock 136>;
+		clock-names = "mixer", "sclk_hdmi";
 	};
 
 	dp_phy: video-phy@10040720 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index bafba25..79524c7 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -61,4 +61,30 @@
 		};
 	};
 
+	pinctrl@13400000 {
+		hdmi_hpd_irq: hdmi-hpd-irq {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	hdmi@14530000 {
+		status = "okay";
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_irq>;
+	};
+
+	i2c_2: i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index d537cd7..09aa06c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -27,6 +27,10 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
 	};
 
 	cpus {
@@ -235,4 +239,75 @@
 		io-channel-ranges;
 		status = "disabled";
 	};
+
+	i2c_0: i2c@12C60000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C60000 0x100>;
+		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 261>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
+		status = "disabled";
+	};
+
+	i2c_1: i2c@12C70000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C70000 0x100>;
+		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 262>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		status = "disabled";
+	};
+
+	i2c_2: i2c@12C80000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C80000 0x100>;
+		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 263>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+		status = "disabled";
+	};
+
+	i2c_3: i2c@12C90000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C90000 0x100>;
+		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 264>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
+		status = "disabled";
+	};
+
+	hdmi@14530000 {
+		compatible = "samsung,exynos4212-hdmi";
+		reg = <0x14530000 0x70000>;
+		interrupts = <0 95 0>;
+		clocks = <&clock 413>, <&clock 143>, <&clock 768>,
+			<&clock 158>, <&clock 640>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+			"sclk_hdmiphy", "mout_hdmi";
+		status = "disabled";
+	};
+
+	mixer@14450000 {
+		compatible = "samsung,exynos5420-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+		clocks = <&clock 431>, <&clock 143>;
+		clock-names = "mixer", "sclk_hdmi";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 5b22508..777fb1c 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,sd5v1", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ede7727..d58cb78 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	spi_0: spi@D0000 {
@@ -68,9 +68,11 @@
 
 	pcie@290000 {
 		reset-gpio = <&pin_ctrl 5 0>;
+		status = "okay";
 	};
 
 	pcie@2a0000 {
 		reset-gpio = <&pin_ctrl 22 0>;
+		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 5d6cf49..8da1070 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -276,6 +276,7 @@
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0x0 0 &gic 53>;
 		num-lanes = <4>;
+		status = "disabled";
 	};
 
 	pcie@2a0000 {
@@ -296,5 +297,6 @@
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0x0 0 &gic 56>;
 		num-lanes = <4>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 185c7c01..1f026ad 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale i.MX23 Evaluation Kit";
@@ -45,14 +45,14 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index fc766ae..526bfdb 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "i.MX23 Olinuxino Low Cost Board";
@@ -40,21 +40,21 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						MX23_PAD_GPMI_ALE__GPIO_0_17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
new file mode 100644
index 0000000..5c0f32ca
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-pinfunc.h
@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 85c3864..cb64e2b 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale STMP378x Development Board";
@@ -39,12 +39,12 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 28b5ce2..c96ceae 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx23-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
@@ -137,174 +138,174 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a2 /* MX23_PAD_PWM0__DUART_RX */
-						0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
-						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
-						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
-						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
-						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
-						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
-						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
-						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
-						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
-						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
-						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
-						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
-						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
-						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
-						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
-						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
-						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_fixup: gpmi-pins-fixup {
 					fsl,pinmux-ids = <
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
-						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
-						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
-						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_pins_fixup: mmc0-pins-fixup {
 					fsl,pinmux-ids = <
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11c0 /* MX23_PAD_PWM2__PWM2 */
+						MX23_PAD_PWM2__PWM2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
-						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
-						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
-						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
-						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
-						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
-						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
-						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
-						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
-						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
-						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
-						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
-						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
-						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
@@ -430,6 +431,7 @@
 				reg = <0x80050000 0x2000>;
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
+				clocks = <&clks 26>;
 			};
 
 			spdif@80054000 {
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 2a377ca..47c8c26 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -16,6 +16,26 @@
 	model = "Armadeus Systems APF27Dev docking/development board";
 	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
 
+	display: display {
+		model = "Chimei-LW700AT9003";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xfae80083>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <640>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +70,12 @@
 	status = "okay";
 };
 
+&fb {
+	display = <&display>;
+	fsl,dmacr = <0x00020010>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b7a1c6d..826231e 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -123,6 +123,7 @@
 			};
 
 			pwm: pwm@10006000 {
+				#pwm-cells = <2>;
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 7eb0758..7198fe3 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Armadeus Systems APF28 module";
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index b602494..e2efd8d 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -10,7 +10,7 @@
  */
 
 /* APF28Dev is a docking board for the APF28 SOM */
-/include/ "imx28-apf28.dts"
+#include "imx28-apf28.dts"
 
 / {
 	model = "Armadeus Systems APF28Dev docking/development board";
@@ -41,30 +41,30 @@
 				hog_pins_apf28dev: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
-						0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
-						0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
-						0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
-						0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+						MX28_PAD_LCD_D16__GPIO_1_16
+						MX28_PAD_LCD_D17__GPIO_1_17
+						MX28_PAD_LCD_D18__GPIO_1_18
+						MX28_PAD_LCD_D19__GPIO_1_19
+						MX28_PAD_LCD_D20__GPIO_1_20
+						MX28_PAD_LCD_D21__GPIO_1_21
+						MX28_PAD_LCD_D22__GPIO_1_22
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 0e7fed4..6f254ca 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -1,5 +1,5 @@
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Bluegiga APX4 Development Kit";
@@ -40,53 +40,53 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
-						0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
-						0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_RDY1__GPIO_0_21
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_JTAG_RTCK__GPIO_4_20
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apx4: lcdif-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
-						0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
-						0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
-						0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
-						0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
 					fsl,pinmux-ids = <
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 1ec8c94..cabb617 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
@@ -26,31 +26,31 @@
 				ssd1306_cfa10036: ssd1306-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+						MX28_PAD_SSP0_DATA7__GPIO_2_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pins_cfa10036: leds-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+						MX28_PAD_AUART1_RX__GPIO_3_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usb0_otg_cfa10036: otg-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+						MX28_PAD_GPMI_RDY0__USB0_ID
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index 182b99f..f93e9a7 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10037 Board";
@@ -25,21 +25,21 @@
 				usb_pins_cfa10037: usb-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_cfa10037: mac0-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 06e4cfa..7087b4b 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10049 Board";
@@ -25,150 +25,150 @@
 				usb_pins_cfa10049: usb-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				i2cmux_pins_cfa10049: i2cmux-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
-						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_LCD_D23__GPIO_1_23
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_cfa10049: mac0-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pca_pins_cfa10049: pca-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+						MX28_PAD_SSP2_SS0__GPIO_2_19
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				rotary_pins_cfa10049: rotary-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi2_pins_cfa10049: spi2-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
-						0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
-						0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
+						MX28_PAD_GPMI_RDN__GPIO_0_24
+						MX28_PAD_GPMI_RESETN__GPIO_0_28
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_ALE__GPIO_0_26
+						MX28_PAD_GPMI_CLE__GPIO_0_27
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10049: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				w1_gpio_pins: w1-gpio@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+						MX28_PAD_LCD_D21__GPIO_1_21
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>; /* 0 will enable the keeper */
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 171bcbe..c3900e7 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -14,7 +14,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10055 Board";
@@ -26,64 +26,64 @@
 				spi2_pins_cfa10055: spi2-cfa10055@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10055: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index b45dd0e..cef959a 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -13,7 +13,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10056 Board";
@@ -25,37 +25,37 @@
 				spi2_pins_cfa10056: spi2-cfa10056@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_pins_cfa10056: lcdif-10056@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 0333c05..3c13128 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -14,7 +14,7 @@
  * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10057 Board";
@@ -26,51 +26,51 @@
 				usb_pins_cfa10057: usb-10057@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10057: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 64c64c5..2469d34 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -14,7 +14,7 @@
  * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10058 Board";
@@ -26,24 +26,24 @@
 				usb_pins_cfa10058: usb-10058@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10058: lcdif-10058@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 15715d9..4267c2b 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Freescale i.MX28 Evaluation Kit";
@@ -70,52 +70,52 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
-						0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
-						0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
-						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
-						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
+						MX28_PAD_SSP1_CMD__GPIO_2_13
+						MX28_PAD_SSP1_DATA3__GPIO_2_15
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+						MX28_PAD_SSP1_SCK__GPIO_2_12
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_AUART2_TX__GPIO_3_9
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio3_5: led_gpio3_5@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_evk: gpmi-nand-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+						MX28_PAD_GPMI_CE1N__GPMI_CE1N
+						MX28_PAD_GPMI_RDY1__GPMI_READY1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_evk: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -182,7 +182,12 @@
 			};
 
 			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
 				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+				fsl,ave-ctrl = <4>;
+				fsl,ave-delay = <2>;
+				fsl,settling = <10>;
 			};
 
 			i2c0: i2c@80058000 {
@@ -242,6 +247,8 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_id_pins_a>;
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
new file mode 100644
index 0000000..d3958da
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "gpmi-nfc-0-boot";
+					reg = <0x00000000 0x01400000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "gpmi-nfc-general-use";
+					reg = <0x01400000 0x0ec00000>;
+				};
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_a
+					     &mmc2_cd_cfg
+					     &mmc2_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+						MX28_PAD_PWM4__GPIO_3_29
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_VSYNC__LCD_VSYNC
+						MX28_PAD_LCD_HSYNC__LCD_HSYNC
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_RESET__LCD_RESET
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_gpio: leds-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_MISO__GPIO_2_26
+						MX28_PAD_SSP3_SCK__GPIO_2_24
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ocotp@8002c000 {
+				status = "okay";
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display>;
+				reset-active-high;
+				status = "okay";
+
+				display: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <6410256>;
+							hactive = <320>;
+							vactive = <240>;
+							hback-porch = <38>;
+							hfront-porch = <20>;
+							vback-porch = <15>;
+							vfront-porch = <5>;
+							hsync-len = <30>;
+							vsync-len = <3>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy1_pins_a>;
+			disable-over-current;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 0>;
+		};
+
+		reg_vddio_sd1: vddio-sd1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 0>;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 0d322a2..8e2477f 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "DENX M28EVK";
@@ -92,26 +92,26 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
-						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
-						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
-						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_AUART2_CTS__GPIO_3_10
+						MX28_PAD_AUART2_RTS__GPIO_3_11
+						MX28_PAD_AUART3_RX__GPIO_3_12
+						MX28_PAD_AUART3_TX__GPIO_3_13
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_m28: lcdif-m28@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
-						0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_ENABLE__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
new file mode 100644
index 0000000..e11f69b
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 6c6a544..4870f07 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "SchulerControl GmbH, SC SPS 1";
@@ -29,13 +29,13 @@
 				hog_pins_a: hog-gpios@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
-						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
-						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+						MX28_PAD_GPMI_D00__GPIO_0_0
+						MX28_PAD_GPMI_D03__GPIO_0_3
+						MX28_PAD_GPMI_D06__GPIO_0_6
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 37be532..be5a055 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -1,106 +1,139 @@
+/*
+ * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Ka-Ro electronics TX28 module";
 	compatible = "karo,tx28", "fsl,imx28";
 
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		display = &display;
+		ds1339 = &ds1339;
+		gpio5 = &gpio5;
+		lcdif = &lcdif;
+		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
+		lcdif_24bit_pins = &lcdif_24bit_pins_a;
+		stk5led = &user_led;
+		usbotg = &usb0;
+	};
+
 	memory {
-		reg = <0x40000000 0x08000000>;
+		reg = <0 0>; /* will be filled in by U-Boot */
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio2 7 0>;
+		status = "disabled";
+	};
 
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
+	regulators {
+		compatible = "simple-bus";
 
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				mac0_pins_gpio: mac0-gpio-mode@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
-						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
-						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
-						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
-						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
-						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
-						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
-						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
-						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-			};
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 18 0>;
+			enable-active-high;
 		};
 
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 27 0>;
+			enable-active-high;
+		};
 
-				ds1339: rtc@68 {
-					compatible = "mxim,ds1339";
-					reg = <0x68>;
-				};
-			};
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
 
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm0_pins_a>;
-				status = "okay";
-			};
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
 
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_4pins_a>;
-				status = "okay";
-			};
+		reg_can_xcvr: can-xcvr {
+			compatible = "regulator-fixed";
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 0 0>;
+			enable-active-low;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+		};
 
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
+		reg_lcd: lcd-power {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 31 0>;
+			enable-active-high;
+		};
+
+		reg_lcd_reset: lcd-reset {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD RESET";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 0>;
+			startup-delay-us = <300000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default", "gpio_mode";
-			pinctrl-0 = <&mac0_pins_a>;
-			pinctrl-1 = <&mac0_pins_gpio>;
-			status = "okay";
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
 		};
 	};
 
+	sound {
+		compatible = "fsl,imx28-tx28-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-tx28-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		user {
+		user_led: user {
 			label = "Heartbeat";
 			gpios = <&gpio4 10 0>;
 			linux,default-trigger = "heartbeat";
@@ -109,8 +142,512 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+		pwms = <&pwm 0 500000>;
+		/*
+		 * a silly way to create a 1:1 relationship between the
+		 * PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
 	};
+
+	matrix_keypad: matrix-keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		col-gpios = <
+			&gpio5 0 0
+			&gpio5 1 0
+			&gpio5 2 0
+			&gpio5 3 0
+		>;
+		row-gpios = <
+			&gpio5 4 0
+			&gpio5 5 0
+			&gpio5 6 0
+			&gpio5 7 0
+		>;
+		/* sample keymap */
+		linux,keymap = <
+			0x00000074 /* row 0, col 0, KEY_POWER */
+			0x00010052 /* row 0, col 1, KEY_KP0 */
+			0x0002004f /* row 0, col 2, KEY_KP1 */
+			0x00030050 /* row 0, col 3, KEY_KP2 */
+			0x01000051 /* row 1, col 0, KEY_KP3 */
+			0x0101004b /* row 1, col 1, KEY_KP4 */
+			0x0102004c /* row 1, col 2, KEY_KP5 */
+			0x0103004d /* row 1, col 3, KEY_KP6 */
+			0x02000047 /* row 2, col 0, KEY_KP7 */
+			0x02010048 /* row 2, col 1, KEY_KP8 */
+			0x02020049 /* row 2, col 2, KEY_KP9 */
+		>;
+		gpio-activelow;
+		linux,wakeup;
+		debounce-delay-ms = <100>;
+		col-scan-delay-us = <5000>;
+		linux,no-autorepeat;
+	};
+};
+
+/* 2nd TX-Std UART - (A)UART1  */
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+/* 3rd TX-Std UART - (A)UART3  */
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&digctl {
+	status = "okay";
+};
+
+/* 1st TX-Std UART - (D)UART */
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&mclk>;
+	};
+
+	gpio5: pca953x@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_pca9554_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 0>;
+		reset-gpios = <&gpio2 6 1>;
+		wake-gpios = <&gpio4 9 0>;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_tsc2007_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 0>;
+		pendown-gpio = <&gpio3 20 1>;
+		ti,x-plate-ohms = /bits/ 16 <660>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "mxim,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		display-timings {
+			native-mode = <&timing5>;
+			timing0: timing0 {
+				panel-name = "VGA";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing1: timing1 {
+				panel-name = "ETV570";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing2: timing2 {
+				panel-name = "ET0350";
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing3: timing3 {
+				panel-name = "ET0430";
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing4: timing4 {
+				panel-name = "ET0500", "ET0700";
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing5: timing5 {
+				panel-name = "ETQ570";
+				clock-frequency = <6400000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default", "gpio_mode";
+	pinctrl-0 = <&mac0_pins_a>;
+	pinctrl-1 = <&tx28_mac0_pins_gpio>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	/* not enabled by default */
+};
+
+&mxs_rtc {
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__GPIO_1_0
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+		fsl,pinmux-ids = <
+			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_pca9554_pins: tx28-pca9554-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_tsc2007_pins: tx28-tsc2007-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+
+	tx28_usbphy0_pins: tx28-usbphy0-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_usbphy1_pins: tx28-usbphy1-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_b>;
+	fsl,saif-master;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default", "special";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	clock-frequency = <57600000>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <57600000>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy0_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy1_pins>;
+	phy_type = "utmi";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 7363fde..cda19c8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx28-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
@@ -207,538 +208,579 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3102 /* MX28_PAD_PWM0__DUART_RX */
-						0x3112 /* MX28_PAD_PWM1__DUART_TX */
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_pins_b: duart@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_4pins_a: duart-4pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
-						0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
-						0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
-						0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
-						0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
-						0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
-						0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
-						0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
-						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
-						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
-						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
-						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
-						0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_status_cfg: gpmi-status-cfg {
 					fsl,pinmux-ids = <
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
-						0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
-						0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_pins_a: auart1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
-						0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
-						0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_2pins_a: auart1-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_a: auart2-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
-						0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_b: auart2-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
-						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
-						0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
-						0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_a: auart3-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
-						0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_b: auart3-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart4_2pins_a: auart4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
-						0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
-						0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
-						0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
-						0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
-						0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
-						0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
-						0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
-						0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
-						0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
-						0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
-						0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
-						0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
-						0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
-						0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
-						0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
-						0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
-						0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_cd_cfg: mmc0-cd-cfg {
 					fsl,pinmux-ids = <
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc0_sck_cfg: mmc0-sck-cfg {
 					fsl,pinmux-ids = <
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg: mmc2-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				i2c0_pins_a: i2c0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
-						0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c0_pins_b: i2c0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
-						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c1_pins_a: i2c1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
-						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif0_pins_b: saif0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif1_pins_a: saif1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				pwm0_pins_a: pwm0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3100 /* MX28_PAD_PWM0__PWM_0 */
+						MX28_PAD_PWM0__PWM_0
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3120 /* MX28_PAD_PWM2__PWM_2 */
+						MX28_PAD_PWM2__PWM_2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_a: pwm3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+						MX28_PAD_PWM3__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_b: pwm3@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
+						MX28_PAD_SAIF0_MCLK__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm4_pins_a: pwm4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+						MX28_PAD_PWM4__PWM_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-						0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-						0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-						0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_16bit_pins_a: lcdif-16bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_sync_pins_a: lcdif-sync@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can0_pins_a: can0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
-						0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can1_pins_a: can1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
-						0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
-						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
-						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
-						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi3_pins_a: spi3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
-						0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
-						0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
-						0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
-						0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
-						0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_a: usbphy0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_b: usbphy0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy1_pins_a: usbphy1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
@@ -902,6 +944,7 @@
 				interrupts = <10 14 15 16 17 18 19
 						20 21 22 23 24 25>;
 				status = "disabled";
+				clocks = <&clks 41>;
 			};
 
 			spdif: spdif@80054000 {
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 123fe84..5a7f552 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -16,6 +16,33 @@
 	model = "Armadeus Systems APF51Dev docking/development board";
 	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
 
+	display@di1 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+
+		display-timings {
+			lw700 {
+				native-mode;
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 1d337d9..be1407c 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -27,6 +27,20 @@
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: dvi {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
 
 	display@di1 {
@@ -35,6 +49,25 @@
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -95,7 +128,7 @@
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
@@ -252,7 +285,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 54cee65..f4dcff3 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -86,6 +86,11 @@
 		interrupt-parent = <&tzic>;
 		ranges;
 
+		iram: iram@1ffe0000 {
+			compatible = "mmio-sram";
+			reg = <0x1ffe0000 0x20000>;
+		};
+
 		ipu: ipu@40000000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx51-ipu";
@@ -374,6 +379,14 @@
 				clocks = <&clks 107>;
 			};
 
+			owire: owire@83fa4000 {
+				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
+				reg = <0x83fa4000 0x4000>;
+				interrupts = <88>;
+				clocks = <&clks 159>;
+				status = "disabled";
+			};
+
 			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -747,6 +760,11 @@
 			fsl,pins = <
 				MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
 				MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart1_rtscts_1: uart1rtscts-1 {
+			fsl,pins = <
 				MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
 				MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
 			>;
@@ -767,6 +785,11 @@
 			fsl,pins = <
 				MX51_PAD_EIM_D25__UART3_RXD 0x1c5
 				MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts_1: uart3rtscts-1 {
+			fsl,pins = <
 				MX51_PAD_EIM_D27__UART3_RTS 0x1c5
 				MX51_PAD_EIM_D24__UART3_CTS 0x1c5
 			>;
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index e97ddae..91a5935 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -55,19 +55,20 @@
 			label = "Power Button";
 			gpios = <&gpio1 8 0>;
 			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
 		};
 
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 0>;
 			linux,code = <115>; /* KEY_VOLUMEUP */
+			gpio-key,wakeup;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 0>;
 			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			gpio-key,wakeup;
 		};
 	};
 
@@ -122,7 +123,6 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	cd-gpios = <&gpio3 13 0>;
 	status = "okay";
 };
 
@@ -136,6 +136,7 @@
 	pinctrl-0 = <&pinctrl_esdhc3_1>;
 	cd-gpios = <&gpio3 11 0>;
 	wp-gpios = <&gpio3 12 0>;
+	bus-width = <8>;
 	status = "okay";
 };
 
@@ -152,7 +153,6 @@
 				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
 				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
 				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13       0x80000000
 				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
 				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
 				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
@@ -318,5 +318,6 @@
 };
 
 &usbotg {
-       status = "okay";
+	dr_mode = "peripheral";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index 9bbe82b..97ed081 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -536,7 +536,7 @@
 #define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
 #define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
 #define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
 #define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
 #define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
 #define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
@@ -654,7 +654,7 @@
 #define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
 #define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
 #define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
 #define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
 #define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
 #define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 3530280..f004913 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -65,8 +65,10 @@
 	};
 };
 
-&sata {
+&audmux {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
 };
 
 &ecspi1 {
@@ -83,11 +85,29 @@
 	};
 };
 
-&ssi1 {
-	fsl,mode = "i2s-slave";
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
 	status = "okay";
 };
 
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -103,11 +123,56 @@
 				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
 				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
 			>;
 		};
 	};
 };
 
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
 &usbotg {
 	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
@@ -116,18 +181,6 @@
 	status = "okay";
 };
 
-&usbh1 {
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
-	status = "okay";
-};
-
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_2>;
@@ -145,30 +198,3 @@
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
new file mode 100644
index 0000000..6e1ccdc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Quad Board";
+	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 1cbbc51..ff6f1e8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -54,6 +54,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
 				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
 			>;
 		};
 	};
@@ -74,8 +75,10 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio6 15 0>;
 	wp-gpios = <&gpio1 13 0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 39eafc2..e75e11b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -80,6 +80,14 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
 };
 
 &audmux {
@@ -108,6 +116,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
 	status = "okay";
 };
 
@@ -172,6 +181,7 @@
 				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
 				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
 			>;
 		};
 	};
@@ -202,6 +212,12 @@
 	};
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_1>;
+	status = "okay";
+};
+
 &ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
@@ -229,6 +245,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 2 0>;
 	wp-gpios = <&gpio2 3 0>;
 	status = "okay";
@@ -237,6 +254,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 0 0>;
 	wp-gpios = <&gpio2 1 0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index a55113e..35f5479 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -43,6 +43,13 @@
 		mux-int-port = <1>;
 		mux-ext-port = <3>;
 	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
 };
 
 &audmux {
@@ -81,6 +88,7 @@
 				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
 				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
 				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
 			>;
 		};
 	};
@@ -90,6 +98,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 29 0>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif_3>;
 	status = "okay";
 };
 
@@ -115,6 +130,14 @@
 	status = "okay";
 };
 
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1_2>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index ccd55c2..59154dc 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -116,6 +116,22 @@
 			arm,data-latency = <4 2 3>;
 		};
 
+		pcie: pcie@0x01000000 {
+			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			reg = <0x01ffc000 0x4000>; /* DBI */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
+				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <0 123 0x04>;
+			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
+			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+			status = "disabled";
+		};
+
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
 			interrupts = <0 94 0x04>;
@@ -136,8 +152,23 @@
 				ranges;
 
 				spdif: spdif@02004000 {
+					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks 197>, <&clks 3>,
+						 <&clks 197>, <&clks 107>,
+						 <&clks 0>,   <&clks 118>,
+						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>;
+					clock-names = "core",  "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7";
+					status = "disabled";
 				};
 
 				ecspi1: ecspi@02008000 {
@@ -1010,6 +1041,12 @@
 							MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
 						>;
 					};
+
+					pinctrl_spdif_3: spdifgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
+						>;
+					};
 				};
 
 				uart1 {
@@ -1184,6 +1221,36 @@
 						>;
 					};
 
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+						>;
+					};
+
 					pinctrl_usdhc3_2: usdhc3grp-2 {
 						fsl,pins = <
 							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 2886a59..cc68e19 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -17,6 +17,44 @@
 	memory {
 		reg = <0x80000000 0x40000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb_otg1_vbus: usb_otg1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: usb_otg2_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 11 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &fec {
@@ -38,6 +76,8 @@
 				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
 				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
 				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
 			>;
 		};
 	};
@@ -49,9 +89,26 @@
 	status = "okay";
 };
 
-&usdhc1 {
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1_1>;
+	pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
 	bus-width = <8>;
 	cd-gpios = <&gpio4 7 0>;
 	wp-gpios = <&gpio4 6 0>;
@@ -59,16 +116,20 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
 	cd-gpios = <&gpio5 0 0>;
 	wp-gpios = <&gpio4 29 0>;
 	status = "okay";
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio3 22 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c46651e..28558f1 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -13,16 +13,20 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
 	};
 
 	cpus {
@@ -380,7 +384,9 @@
 			};
 
 			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus";
+				compatible = "fsl,imx6sl-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 
@@ -528,10 +534,26 @@
 				interrupts = <0 89 0x04>;
 			};
 
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6sl-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
+							MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
+							MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+						>;
+					};
+				};
+
 				fec {
 					pinctrl_fec_1: fecgrp-1 {
 						fsl,pins = <
@@ -557,6 +579,64 @@
 					};
 				};
 
+				usbotg1 {
+					pinctrl_usbotg1_1: usbotg1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_2: usbotg1grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_3: usbotg1grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_4: usbotg1grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_5: usbotg1grp-5 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
+						>;
+					};
+				};
+
+				usbotg2 {
+					pinctrl_usbotg2_1: usbotg2grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_2: usbotg2grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_3: usbotg2grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_4: usbotg2grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
+						>;
+					};
+				};
+
 				usdhc1 {
 					pinctrl_usdhc1_1: usdhc1grp-1 {
 						fsl,pins = <
@@ -572,6 +652,38 @@
 							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
 						>;
 					};
+
+					pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
+						>;
+					};
+
+
 				};
 
 				usdhc2 {
@@ -585,6 +697,29 @@
 							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170b9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100b9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170f9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100f9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+						>;
+					};
+
 				};
 
 				usdhc3 {
@@ -598,6 +733,28 @@
 							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170b9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100b9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170f9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100f9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+						>;
+					};
 				};
 			};
 
@@ -619,7 +776,8 @@
 					 <&clks IMX6SL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 
 			pxp: pxp@020f0000 {
@@ -663,7 +821,7 @@
 			usbotg2: usb@02184200 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
+				interrupts = <0 42 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
@@ -673,7 +831,7 @@
 			usbh: usb@02184400 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
-				interrupts = <0 42 0x04>;
+				interrupts = <0 40 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 813b91d..0f06f86 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -5,6 +5,11 @@
 /include/ "skeleton.dtsi"
 
 / {
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator";
+		reg = <0x10000000 0x200>;
+	};
+
 	timer@13000000 {
 		reg = <0x13000000 0x100>;
 		interrupt-parent = <&pic>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index b6b82ec..e6be931 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -19,8 +19,11 @@
 	};
 
 	syscon {
-		/* AP system controller registers */
+		compatible = "arm,integrator-ap-syscon";
 		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logical module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
 	};
 
 	timer0: timer@13000000 {
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 72693a6..7deb3a3 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -13,8 +13,8 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
 
-	cpcon {
-		/* CP controller registers */
+	syscon {
+		compatible = "arm,integrator-cp-syscon";
 		reg = <0xcb000000 0x100>;
 	};
 
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
new file mode 100644
index 0000000..d6713b1
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -0,0 +1,821 @@
+/*
+ * Device Tree Source for Keystone 2 clock tree
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	refclkmain: refclkmain {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <122880000>;
+		clock-output-names = "refclk-main";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclkmain>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	ddr3allclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	ddr3bllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+	chipclk1: chipclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1";
+	};
+
+	chipclk1rstiso: chipclk1rstiso {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso";
+	};
+
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
+
+	chipstmxptclk: chipstmxptclk {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310164 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "chipstmxptclk";
+	};
+
+	chipclk12: chipclk12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk12";
+	};
+
+	chipclk13: chipclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk13";
+	};
+
+	chipclk14: chipclk14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk14";
+	};
+
+	chipclk16: chipclk16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk16";
+	};
+
+	chipclk112: chipclk112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk112";
+	};
+
+	chipclk124: chipclk124 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <24>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk114";
+	};
+
+	chipclk1rstiso13: chipclk1rstiso13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso13";
+	};
+
+	chipclk1rstiso14: chipclk1rstiso14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso14";
+	};
+
+	chipclk1rstiso16: chipclk1rstiso16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso16";
+	};
+
+	chipclk1rstiso112: chipclk1rstiso112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso112";
+	};
+
+	clkmodrst0: clkmodrst0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "modrst0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemifspi: clkaemifspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "aemif-spi";
+		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkdebugsstrc: clkdebugsstrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "debugss-trc";
+		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clktetbtrc: clktetbtrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tetb-trc";
+		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clkpa: clkpa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "pa";
+		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkcpgmac: clkcpgmac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "cpgmac";
+		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clksa: clksa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "sa";
+		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkpcie: clkpcie {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <3>;
+	};
+
+	clksrio: clksrio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clksr: clksr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso112>;
+		clock-output-names = "sr";
+		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <6>;
+	};
+
+	clkmsmcsram: clkmsmcsram {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "msmcsram";
+		reg = <0x02350038 0xb00>, <0x0235001c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <7>;
+	};
+
+	clkgem0: clkgem0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem0";
+		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <8>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr30: clkddr30 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "ddr3-0";
+		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clkddr31: clkddr31 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clktac01 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clktac23 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkwdtimer0: clkwdtimer0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer1: clkwdtimer1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer2: clkwdtimer2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer3: clkwdtimer3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart0: clkuart0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart1: clkuart1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemif: clkaemif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "aemif";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkusim: clkusim {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "usim";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clki2c: clki2c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "i2c";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkspi: clkspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "spi";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkgpio: clkgpio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "gpio";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkkeymgr: clkkeymgr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "keymgr";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts
index a68e34b..100bdf5 100644
--- a/arch/arm/boot/dts/keystone.dts
+++ b/arch/arm/boot/dts/keystone.dts
@@ -100,13 +100,15 @@
 			reg = <0x023100e8 4>;	/* pll reset control reg */
 		};
 
+		/include/ "keystone-clocks.dtsi"
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02530c00 0x100>;
-			clock-frequency = <133120000>;
+			clocks	= <&clkuart0>;
 			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -116,9 +118,66 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02531000 0x100>;
-			clock-frequency = <133120000>;
+			clocks	= <&clkuart1>;
 			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		i2c0: i2c@2530000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530000 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dtt@50 {
+				compatible = "at,24c1024";
+				reg = <0x50>;
+			};
+		};
+
+		i2c1: i2c@2530400 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530400 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530800 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		spi0: spi@21000400 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
+
+		spi1: spi@21000600 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000600 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
+
+		spi2: spi@21000800 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index 72c4b0a..c39dd76 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -19,7 +19,6 @@
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index 36c411d..701c6b6 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -19,7 +19,6 @@
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index c0e2a58..053aa20 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -39,28 +39,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			chip-delay = <25>;
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x500000 0x1fb00000>;
-			};
-		};
-
 		sata@80000 {
 			nr-ports = <2>;
 			status = "okay";
@@ -80,6 +58,28 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index d544f77..aefa375 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -148,44 +148,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-			chip-delay = <35>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
 	};
 
 	regulators {
@@ -220,6 +182,44 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 59a2117..33ff368 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -34,26 +34,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x0500000 0xfb00000>;
-			};
-		};
 	};
 	gpio-leds {
 		compatible = "gpio-leds";
@@ -91,6 +71,26 @@
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 6f7c7d7..a43bebb 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -67,31 +67,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			chip-delay = <40>;
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "pogoplug";
-				reg = <0x0500000 0x2000000>;
-			};
-
-			partition@2500000 {
-				label = "root";
-				reg = <0x02500000 0xd800000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -171,6 +146,32 @@
 	};
 };
 
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 6548b9d..d30a91a 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -40,26 +40,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x00100000 0x00400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x00500000 0x1fb00000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -97,6 +77,26 @@
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index cb711a3..c5fb02f 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0",  "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -43,6 +43,7 @@
 				marvell,function = "gpio";
 			};
 		};
+
 		serial@12000 {
 			status = "okay";
 		};
@@ -51,28 +52,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x600000>;
-			};
-
-			partition@700000 {
-				label = "root";
-				reg = <0x0700000 0xf900000>;
-			};
-
-		};
 	};
 
 	gpio_keys {
@@ -93,6 +72,7 @@
 			gpios = <&gpio0 28 1>;
 		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
@@ -113,13 +93,39 @@
 			gpios = <&gpio0 27 0>;
 		};
 	};
+
 	gpio_poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&pmx_power_off>;
 		pinctrl-names = "default";
 		gpios = <&gpio0 24 0>;
 	};
+};
 
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
 
 };
 
@@ -134,6 +140,7 @@
 
 &eth0 {
 	status = "okay";
+
 	ethernet0-port@0 {
 		phy-handle = <&ethphy0>;
 	};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 0323f01..4a62b20 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -19,7 +19,6 @@
 	};
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
@@ -83,35 +82,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0xc0000>;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-			};
-
-			partition@100000 {
-				label = "zImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@540000 {
-				label = "initrd";
-				reg = <0x540000 0x300000>;
-			};
-
-			partition@980000 {
-				label = "boot";
-				reg = <0x980000 0x1f400000>;
-			};
-		};
 	};
 
 	gpio-leds {
@@ -180,6 +150,35 @@
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index df84474..d15395d 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -113,31 +113,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@400000 {
-				label = "uInitrd";
-				reg = <0x540000 0x1000000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -195,6 +170,32 @@
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@400000 {
+		label = "uInitrd";
+		reg = <0x540000 0x1000000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 6899408..cd44f37 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -34,13 +34,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "ok";
-			chip-delay = <25>;
-		};
 	};
 
 	i2c@0 {
@@ -51,6 +44,13 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "ok";
+	chip-delay = <25>;
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index ce2b94b..6c1ec27 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -17,7 +17,6 @@
         };
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
@@ -96,37 +95,6 @@
                         pinctrl-names = "default";
                 };
 
-                nand@3000000 {
-                        pinctrl-0 = <&pmx_nand>;
-                        pinctrl-names = "default";
-                        status = "okay";
-
-                        partition@0 {
-                                label = "uboot";
-                                reg = <0x0000000 0x100000>;
-                        };
-
-                        partition@100000 {
-                                label = "env";
-                                reg = <0x100000 0x80000>;
-                        };
-
-                        partition@180000 {
-                                label = "fdt";
-                                reg = <0x180000 0x80000>;
-                        };
-
-                        partition@200000 {
-                                label = "kernel";
-                                reg = <0x200000 0x400000>;
-                        };
-
-                        partition@600000 {
-                                label = "rootfs";
-                                reg = <0x600000 0x1fa00000>;
-                        };
-                };
-
 		rtc@10300 {
 			status = "disabled";
 		};
@@ -194,6 +162,37 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "fdt";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "kernel";
+		reg = <0x200000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "rootfs";
+		reg = <0x600000 0x1fa00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index 874857e..e6a102c 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -17,7 +17,6 @@
 	};
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
@@ -98,36 +97,6 @@
 			status = "okay";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "minirootfs";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "jffs2";
-				reg = <0x1800000 0x6800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -208,6 +177,36 @@
         };
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
index 06267a9..e3f915d 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -27,49 +27,6 @@
 			nr-ports = <2>;
 		};
 
-		nand@3000000 {
-			status = "okay";
-			chip-delay = <35>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0x0100000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "uboot_env";
-				reg = <0x0100000 0x0080000>;
-			};
-			partition@180000 {
-				label = "key_store";
-				reg = <0x0180000 0x0080000>;
-			};
-			partition@200000 {
-				label = "info";
-				reg = <0x0200000 0x0080000>;
-			};
-			partition@280000 {
-				label = "etc";
-				reg = <0x0280000 0x0a00000>;
-			};
-			partition@c80000 {
-				label = "kernel_1";
-				reg = <0x0c80000 0x0a00000>;
-			};
-			partition@1680000 {
-				label = "rootfs1";
-				reg = <0x1680000 0x2fc0000>;
-			};
-			partition@4640000 {
-				label = "kernel_2";
-				reg = <0x4640000 0x0a00000>;
-			};
-			partition@5040000 {
-				label = "rootfs2";
-				reg = <0x5040000 0x2fc0000>;
-			};
-		};
-
 		pcie-controller {
 			status = "okay";
 
@@ -105,3 +62,46 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 7aeae0c..b5418bc 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -15,7 +15,6 @@
 	};
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 85ccf8d..f0e3d21 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -29,43 +29,6 @@
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			chip-delay = <25>;
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x90000>;
-			};
-
-			partition@90000 {
-				label = "env";
-				reg = <0x90000 0x44000>;
-			};
-
-			partition@d4000 {
-				label = "test";
-				reg = <0xd4000 0x24000>;
-			};
-
-			partition@f4000 {
-				label = "conf";
-				reg = <0xf4000 0x400000>;
-			};
-
-			partition@4f4000 {
-				label = "linux";
-				reg = <0x4f4000 0x1d20000>;
-			};
-
-			partition@2214000 {
-				label = "user";
-				reg = <0x2214000 0x1dec000>;
-			};
-		};
-
 		sata@80000 {
 			nr-ports = <1>;
 			status = "okay";
@@ -167,6 +130,43 @@
 	};
 };
 
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x24000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
new file mode 100644
index 0000000..851fb2a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -0,0 +1,223 @@
+/*
+ * Device Tree file for OpenBlocks A7 board
+ *
+ * Copyright (C) 2013 Free Electrons
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA7";
+	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "ok";
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+		};
+
+		serial@12100 {
+			status = "ok";
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
+
+			s24c02: s24c02@50 {
+				compatible = "24c02";
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Accessible on connector J202. The MPP
+			 * listed below are pin 1-7, pin 8 is unused,
+			 * pin 9 is external reset input and pin 10 is
+			 * ground.
+			 */
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+					       "mpp35", "mpp34", "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa7:red:stat";
+			gpios = <&gpio1 9 1>;
+		};
+
+		led-green {
+			label = "obsa7:green:stat";
+			gpios = <&gpio1 10 1>;
+		};
+
+		led-yellow {
+			label = "obsa7:yellow:stat";
+			gpios = <&gpio1 11 1>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Init Button";
+			linux,code = <116>;
+			gpios = <&gpio1 6 0>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x1c0000>;
+	};
+
+	partition@1c0000 {
+		label = "env";
+		reg = <0x1c0000 0x2c0000>;
+	};
+
+	partition@480000 {
+		label = "test";
+		reg = <0x480000 0x160000>;
+	};
+
+	partition@5e0000 {
+		label = "conf";
+		reg = <0x5e0000 0x540000>;
+	};
+
+	partition@b20000 {
+		label = "linux";
+		reg = <0xb20000 0x3d40000>;
+	};
+
+	partition@4860000 {
+		label = "user";
+		reg = <0x4860000 0xb7a0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	pinctrl-0 = <&pmx_ge1>;
+	pinctrl-names = "default";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index 5696b63..1173d7f 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -48,27 +48,6 @@
 			pinctrl-names = "default";
 			status = "okay";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x0500000 0x1fb00000>;
-			};
-		};
 	};
 
 	regulators {
@@ -92,6 +71,27 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 30842b4..320da67 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -90,37 +90,6 @@
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-			};
-
-			partition@180000 {
-				label = "u-boot env";
-				reg = <0x0180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "uInitrd";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "rootfs";
-				reg = <0x1800000 0xe800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -204,6 +173,37 @@
 	};
 };
 
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 9efcd2d..345562f 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -6,7 +6,6 @@
 
 / {
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 1335b2e..8b73c80 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -28,16 +28,43 @@
 		compatible = "marvell,kirkwood-mbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
 		controller = <&mbusc>;
 		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
 		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		crypto@0301 {
+			compatible = "marvell,orion-crypto";
+			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
+			      <MBUS_ID(0x03, 0x01) 0 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			status = "okay";
+		};
+
+		nand: nand@012f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			status = "disabled";
+		};
 	};
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x0100000
-		          0xf4000000 0xf4000000 0x0000400
-		          0xf5000000 0xf5000000 0x0000400>;
+		ranges = <0x00000000 0xf1000000 0x0100000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -193,20 +220,6 @@
 			status = "okay";
 		};
 
-		nand@3000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "marvell,orion-nand";
-			reg = <0xf4000000 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			clocks = <&gate_clk 7>;
-			status = "disabled";
-		};
-
 		i2c@11000 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11000 0x20>;
@@ -218,16 +231,6 @@
 			status = "disabled";
 		};
 
-		crypto@30000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x30000 0x10000>,
-			      <0xf5000000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
-		};
-
 		mdio: mdio-bus@72004 {
 			compatible = "marvell,orion-mdio";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
new file mode 100644
index 0000000..c6da987
--- /dev/null
+++ b/arch/arm/boot/dts/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 0000000..9c18adf
--- /dev/null
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vmmc-supply = <&vddvario>;
+		vmmc_aux-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
new file mode 100644
index 0000000..b0ee342
--- /dev/null
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -0,0 +1,33 @@
+/*
+ * Common features on the Zoom debug board
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <3 0 0x10000000 0x00000400>,
+		 <7 0 0x2c000000 0x01000000>;
+
+	/*
+	 * Four port TL16CP754C serial port on GPMC,
+	 * they probably share the same GPIO IRQ
+	 * REVISIT: Add timing support from slls644g.pdf
+	 */
+	8250@3,0 {
+		compatible = "ns16550a";
+		reg = <3 0 0x100>;
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+
+	ethernet@gpmc {
+		reg = <7 0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 224c08f..34cdecb 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -50,15 +50,15 @@
 			label = "bootloader";
 			reg = <0 0x20000>;
 		};
-		partition@0x20000 {
+		partition@20000 {
 			label = "params";
 			reg = <0x20000 0x20000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "kernel";
 			reg = <0x40000 0x200000>;
 		};
-		partition@0x240000 {
+		partition@240000 {
 			label = "file-system";
 			reg = <0x240000 0x3dc0000>;
 		};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 2816bf6..31a632f 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -69,6 +69,23 @@
 		};
 
 	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+	};
 };
 
 &omap3_pmx_wkup {
@@ -79,6 +96,37 @@
 	};
 };
 
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb2_pins
+	>;
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	hsusbb2_pins: pinmux_hsusbb2_pins {
+		pinctrl-single,pins = <
+			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <2600000>;
 
@@ -144,19 +192,12 @@
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
 	mode = <3>;
 	power = <50>;
 };
 
-&omap3_pmx_core {
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
-		>;
-	};
-};
-
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
@@ -166,3 +207,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio1_pins>;
 };
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index dfd8310..fa532aa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -44,17 +44,6 @@
 		};
 	};
 
-	/* HS USB Port 2 RESET */
-	hsusb2_reset: hsusb2_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 19 0>;	/* gpio_147 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Port 2 Power */
 	hsusb2_power: hsusb2_power_reg {
 		compatible = "regulator-fixed";
@@ -68,7 +57,7 @@
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb2_reset>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
 	};
 
@@ -101,18 +90,18 @@
 
 	hsusbb2_pins: pinmux_hsusbb2_pins {
 		pinctrl-single,pins = <
-			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */
-			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */
-			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */
-			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */
-			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */
-			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */
-			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */
-			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */
-			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */
-			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */
-			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */
+			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
 		>;
 	};
 
@@ -180,3 +169,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio1_pins>;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 7ef2827..4665421 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -125,7 +125,7 @@
 		nand-bus-width = <16>;
 
 		gpmc,device-nand;
-		gpmc,sync-clki-ps = <0>;
+		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
 		gpmc,cs-wr-off-ns = <44>;
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
new file mode 100644
index 0000000..4df68ad
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+
+
+/ {
+	model = "TI OMAP37XX EVM (TMDSEVM3730)";
+	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+	};
+};
+
+&omap3_pmx_core {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>,
+		 <5 0 0x2c000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0x1f880000>;
+		};
+	};
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
new file mode 100644
index 0000000..3007e79
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 22 0>;	/* gpio150 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ethernet@gpmc {
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		reg = <5 0 0xff>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 7d4329d..e10dcd0 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -8,68 +8,14 @@
 /dts-v1/;
 
 #include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
 
 / {
-	model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
+	model = "TI OMAP35XX EVM (TMDSEVM3530)";
 	compatible = "ti,omap3-evm", "ti,omap3";
 
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
-
-	leds {
-		compatible = "gpio-leds";
-		ledb {
-			label = "omap3evm::ledb";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
 };
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
new file mode 100644
index 0000000..b9b55c9
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
+ *
+ * Based on omap3-beagle-xm.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "OMAP3 GTA04";
+	compatible = "ti,omap3-gta04", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		aux-button {
+			label = "aux";
+			linux,code = <169>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
+			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	/* pressure sensor */
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+	};
+
+	/* leds */
+	tca6507@45 {
+		compatible = "ti,tca6507";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x45>;
+
+		gta04_led0: red_aux@0 {
+			label = "gta04:red:aux";
+			reg = <0x0>;
+		};
+
+		gta04_led1: green_aux@1 {
+			label = "gta04:green:aux";
+			reg = <0x1>;
+		};
+
+		gta04_led3: red_power@3 {
+			label = "gta04:red:power";
+			reg = <0x3>;
+			linux,default-trigger = "default-on";
+		};
+
+		gta04_led4: green_power@4 {
+			label = "gta04:green:power";
+			reg = <0x4>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 2326d11..ba1e58b 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -77,6 +77,8 @@
 			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
+
+	leds_pins: pinmux_leds_pins { };
 };
 
 &i2c1 {
@@ -141,3 +143,12 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index e8c4828..d5cc792 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,13 +10,17 @@
  */
 
 #include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
 
 / {
 	model = "IGEPv2";
 	compatible = "isee,omap3-igep0020", "ti,omap3";
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
 		compatible = "gpio-leds";
+
 		boot {
 			 label = "omap3:green:boot";
 			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
@@ -41,19 +45,56 @@
 		};
 	};
 
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
+       /* HS USB Port 1 Power */
+       hsusb1_power: hsusb1_power_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "hsusb1_vbus";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
+               startup-delay-us = <70000>;
+       };
 
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+		vcc-supply = <&hsusb1_power>;
 	};
 };
 
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_pins
+	>;
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			0x5aa (PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
+			0x5a8 (PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
+			0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+			0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+		>;
+	};
+};
+
+&leds_pins {
+	pinctrl-single,pins = <
+		0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+		0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+		0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+	>;
+};
+
 &i2c3 {
 	clock-frequency = <100000>;
 
@@ -99,59 +140,37 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
 	};
 
-	ethernet@5,0 {
+	ethernet@gpmc {
 		pinctrl-names = "default";
 		pinctrl-0 = <&smsc911x_pins>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
 		interrupt-parent = <&gpio6>;
-		interrupts = <16 8>;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
-		reg-io-width = <4>;
-
-		smsc,save-mac-address;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 644d053..525e6d9 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -16,7 +16,10 @@
 	compatible = "isee,omap3-igep0030", "ti,omap3";
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
 		compatible = "gpio-leds";
+
 		boot {
 			 label = "omap3:green:boot";
 			 gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
@@ -43,6 +46,12 @@
 	};
 };
 
+&leds_pins {
+	pinctrl-single,pins = <
+		0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+	>;
+};
+
 &gpmc {
 	ranges = <0 0 0x00000000 0x20000000>;
 
@@ -74,19 +83,19 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
new file mode 100644
index 0000000..39828ce
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n9.dts - Device Tree file for Nokia N9
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N9";
+	compatible = "nokia,omap3-n9", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
new file mode 100644
index 0000000..c4f20bf
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -0,0 +1,484 @@
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 (or later) as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "Nokia N900";
+	compatible = "nokia,omap3-n900", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		camera_lens_cover {
+			label = "Camera Lens Cover";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
+			gpio-key,wakeup;
+		};
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
+			gpio-key,wakeup;
+		};
+
+		camera_capture {
+			label = "Camera Capture";
+			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+			linux,code = <0xd4>; /* KEY_CAMERA */
+			gpio-key,wakeup;
+		};
+
+		lock_button {
+			label = "Lock Button";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+			linux,code = <0x98>; /* KEY_SCREENLOCK */
+			gpio-key,wakeup;
+		};
+
+		keypad_slide {
+			label = "Keypad Slide";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
+			gpio-key,wakeup;
+		};
+
+		proximity_sensor {
+			label = "Proximity Sensor";
+			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
+		};
+	};
+
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	display_pins: pinmux_display_pins {
+		pinctrl-single,pins = <
+			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2200000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux1 {
+	regulator-name = "V28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on; /* due battery cover sensor */
+};
+
+&vaux2 {
+	regulator-name = "VCSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vaux3 {
+	regulator-name = "VMMC2_30";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-name = "VCAM_ANA_28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+	regulator-name = "VMMC1";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+	regulator-name = "V28_A";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on; /* due VIO leak to AIC34 VDDs */
+};
+
+&vpll1 {
+	regulator-name = "VPLL";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vpll2 {
+	regulator-name = "VSDI_CSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vsim {
+	regulator-name = "VMMC2_IO_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+	regulator-name = "VIO";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+};
+
+&vintana1 {
+	regulator-name = "VINTANA1";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&vintana2 {
+	regulator-name = "VINTANA2";
+	regulator-min-microvolt = <2750000>;
+	regulator-max-microvolt = <2750000>;
+	regulator-always-on;
+};
+
+&vintdig {
+	regulator-name = "VINTDIG";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&twl {
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		ti,enable-vibra = <1>;
+	};
+};
+
+&twl_gpio {
+	ti,pullups	= <0x0>;
+	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <100000>;
+
+	tlv320aic3x: tlv320aic3x@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		ai3x-gpio-func = <
+			0 /* AIC3X_GPIO1_FUNC_DISABLED */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	tlv320aic3x_aux: tlv320aic3x@19 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x19>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	lp5523: lp5523@32 {
+		compatible = "national,lp5523";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+		chan0 {
+			chan-name = "lp5523:kb1";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan1 {
+			chan-name = "lp5523:kb2";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan2 {
+			chan-name = "lp5523:kb3";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan3 {
+			chan-name = "lp5523:kb4";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan4 {
+			chan-name = "lp5523:b";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan5 {
+			chan-name = "lp5523:g";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan6 {
+			chan-name = "lp5523:r";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan7 {
+			chan-name = "lp5523:kb5";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan8 {
+			chan-name = "lp5523:kb6";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+	};
+
+	bq27200: bq27200@55 {
+		compatible = "ti,bq27200";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
+
+	/* gpio-irq for dma: 65 */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x10000000>;
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's
+		 * Maemo 5 (Fremantle) release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00020000 0x00060000>;
+		};
+		partition@2 {
+			label = "log";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "kernel";
+			reg = <0x000c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "initfs";
+			reg = <0x002c0000 0x00200000>;
+		};
+		partition@5 {
+			label = "rootfs";
+			reg = <0x004c0000 0x0fb40000>;
+		};
+	};
+};
+
+&mcspi1 {
+	/*
+	 * For some reason, touchscreen is necessary for screen to work at
+	 * all on real hw. It works well without it on emulator.
+	 *
+	 * Also... order in the device tree actually matters here.
+	 */
+	tsc2005@0 {
+		compatible = "tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+	};
+	mipid@2 {
+		compatible = "acx565akm";
+		spi-max-frequency = <6000000>;
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_pins>;
+	};
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <2>;
+	power = <50>;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
new file mode 100644
index 0000000..94eb77d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -0,0 +1,174 @@
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	vemmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEMMC";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		startup-delay-us = <150>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2900000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+	compatible = "ti,twl5031";
+};
+
+&twl_gpio {
+	ti,pullups	= <0x000001>; /* BIT(0) */
+	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vemmc>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x20000000>;
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000000>;
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's MeeGo 1.2
+		 * Harmattan release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00100000 0x002c0000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x003c0000 0x01000000>;
+		};
+		partition@3 {
+			label = "log";
+			reg = <0x013c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "var";
+			reg = <0x015c0000 0x1ca40000>;
+		};
+		partition@5 {
+			label = "moslo";
+			reg = <0x1e000000 0x02000000>;
+		};
+		partition@6 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x20000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
new file mode 100644
index 0000000..b076a52
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n950.dts - Device Tree file for Nokia N950
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N950";
+	compatible = "nokia,omap3-n950", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 8f1abec..a461d2f 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -76,6 +76,8 @@
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
 	mode = <3>;
 	power = <50>;
 };
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
new file mode 100644
index 0000000..15eb9fe
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+	model = "TI Zoom3";
+	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 5 0>;	/* gpio101 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	/* REVISIT: twl gpio0 is mmc0_cd */
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			0x168 (PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
+			0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+			0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+			0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
+		pinctrl-single,pins = <
+			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+       status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index b41bd57..f3a0c26 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -19,6 +19,9 @@
 	interrupt-parent = <&intc>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -37,6 +40,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
+		reg = <0x54000000 0x800000>;
 		interrupts = <3>;
 		ti,hwmods = "debugss";
 	};
@@ -71,6 +75,8 @@
 	 */
 	ocp {
 		compatible = "simple-bus";
+		reg = <0x68000000 0x10000>;
+		interrupts = <9 10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -107,15 +113,19 @@
 			reg = <0x48002030 0x05cc>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0xff1f>;
 		};
 
-		omap3_pmx_wkup: pinmux@0x48002a00 {
+		omap3_pmx_wkup: pinmux@48002a00 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x48002a00 0x5c>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0xff1f>;
 		};
@@ -189,24 +199,40 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@49020000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x49020000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48070000 0x80>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -214,6 +240,10 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48072000 0x80>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -221,6 +251,10 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48060000 0x80>;
+			interrupts = <61>;
+			dmas = <&sdma 25 &sdma 26>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -228,6 +262,8 @@
 
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -246,6 +282,8 @@
 
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -259,6 +297,8 @@
 
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -272,6 +312,8 @@
 
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x480ba000 0x100>;
+			interrupts = <48>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -280,8 +322,17 @@
 			dma-names = "tx0", "rx0";
 		};
 
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+			ti,hwmods = "hdq1w";
+		};
+
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
@@ -290,6 +341,8 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
 			ti,hwmods = "mmc2";
 			dmas = <&sdma 47>, <&sdma 48>;
 			dma-names = "tx", "rx";
@@ -297,6 +350,8 @@
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x480ad000 0x200>;
+			interrupts = <94>;
 			ti,hwmods = "mmc3";
 			dmas = <&sdma 77>, <&sdma 78>;
 			dma-names = "tx", "rx";
@@ -304,6 +359,7 @@
 
 		wdt2: wdt@48314000 {
 			compatible = "ti,omap3-wdt";
+			reg = <0x48314000 0x80>;
 			ti,hwmods = "wd_timer2";
 		};
 
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index e2249bc..281914e 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -84,15 +84,15 @@
 			label = "bootloader-nor";
 			reg = <0 0x40000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "params-nor";
 			reg = <0x40000 0x40000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "kernel-nor";
 			reg = <0x80000 0x200000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "filesystem-nor";
 			reg = <0x240000 0x7d80000>;
 		};
@@ -125,19 +125,19 @@
 			label = "xloader-nand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-nand";
 			reg = <0x80000 0x140000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "params-nand";
 			reg = <0x1c0000 0xc0000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "kernel-nand";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "filesystem-nand";
 			reg = <0x780000 0x7880000>;
 		};
@@ -170,19 +170,19 @@
 			label = "xloader-onenand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-onenand";
 			reg = <0x80000 0x40000>;
 		};
-		partition@0xc0000 {
+		partition@c0000 {
 			label = "params-onenand";
 			reg = <0xc0000 0x20000>;
 		};
-		partition@0xe0000 {
+		partition@e0000 {
 			label = "kernel-onenand";
 			reg = <0xe0000 0x200000>;
 		};
-		partition@0x2e0000 {
+		partition@2e0000 {
 			label = "filesystem-onenand";
 			reg = <0x2e0000 0xfd20000>;
 		};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index f8b3765..380c22e 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -31,6 +31,10 @@
 	ocp {
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x49042000 0x400>;
+			interrupts = <80>;
+			dmas = <&sdma 81 &sdma 82>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 814ab67..298e850 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -60,22 +60,6 @@
 			"AFMR", "Line In";
 	};
 
-	/*
-	 * Temp hack: Need to be replaced with the proper gpio-controlled
-	 * reset driver as soon it will be merged.
-	 * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830
-	 */
-	/* HS USB Port 1 RESET */
-	hsusb1_reset: hsusb1_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 30 0>;	/* gpio_62 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Port 1 Power */
 	hsusb1_power: hsusb1_power_reg {
 		compatible = "regulator-fixed";
@@ -97,7 +81,7 @@
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb1_reset>;
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
 		vcc-supply = <&hsusb1_power>;
 	/**
 	 * FIXME:
@@ -122,37 +106,19 @@
 	};
 };
 
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6030_wkup_pins
-	>;
-
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
-	};
-};
-
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
+			&dss_dpi_pins
+			&tfp410_pins
 			&dss_hdmi_pins
 			&tpd12s015_pins
 			&hsusbb1_pins
 	>;
 
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
@@ -179,6 +145,47 @@
 		>;
 	};
 
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+		>;
+	};
+
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
 			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
@@ -305,6 +312,7 @@
 };
 
 #include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 56c4354..816d1c9 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -62,3 +62,7 @@
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&gpio1 {
+	 ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 4f78380..5fc3f43 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -155,23 +155,9 @@
 	};
 };
 
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6030_wkup_pins
-	>;
-
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
-	};
-};
-
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&dmic_pins
@@ -206,12 +192,6 @@
 		>;
 	};
 
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
@@ -370,6 +350,7 @@
 };
 
 #include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 22d9f2b..a1e0585 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -17,6 +17,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -56,7 +60,7 @@
 		cache-level = <2>;
 	};
 
-	local-timer@0x48240600 {
+	local-timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x20>;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
@@ -114,6 +118,8 @@
 			reg = <0x4a100040 0x0196>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0x7fff>;
 		};
@@ -122,6 +128,8 @@
 			reg = <0x4a31e040 0x0038>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0x7fff>;
 		};
@@ -214,6 +222,7 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
 		};
 
 		uart1: serial@4806a000 {
@@ -248,6 +257,12 @@
 			clock-frequency = <48000000>;
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
@@ -492,6 +507,7 @@
 			reg = <0x4c000000 0x100>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif1";
+			ti,no-idle-on-init;
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
@@ -503,6 +519,7 @@
 			reg = <0x4d000000 0x100>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif2";
+			ti,no-idle-on-init;
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
@@ -519,7 +536,8 @@
 			usb2_phy: usb2phy@4a0ad080 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a0ad080 0x58>;
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb2phy>;
+				#phy-cells = <0>;
 			};
 		};
 
@@ -643,12 +661,16 @@
 			};
 		};
 
-		omap_control_usb: omap-control-usb@4a002300 {
-			compatible = "ti,omap-control-usb";
-			reg = <0x4a002300 0x4>,
-			      <0x4a00233c 0x4>;
-			reg-names = "control_dev_conf", "otghs_control";
-			ti,type = <1>;
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usbotg: control-phy@4a00233c {
+			compatible = "ti,control-phy-otghs";
+			reg = <0x4a00233c 0x4>;
+			reg-names = "otghs_control";
 		};
 
 		usb_otg_hs: usb_otg_hs@4a0ab000 {
@@ -658,10 +680,30 @@
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
 			usb-phy = <&usb2_phy>;
+			phys = <&usb2_phy>;
+			phy-names = "usb2-phy";
 			multipoint = <1>;
 			num-eps = <16>;
 			ram-bits = <12>;
-			ti,has-mailbox;
+			ctrl-module = <&omap_control_usbotg>;
+		};
+
+		aes: aes@4b501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x4b501000 0xa0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 111>, <&sdma 110>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 117>, <&sdma 116>;
+			dma-names = "tx", "rx";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 65d7b60..002fa70 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -27,21 +27,10 @@
 		regulator-max-microvolt = <3000000>;
 	};
 
-	/* HS USB Port 2 RESET */
-	hsusb2_reset: hsusb2_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb2_reset>;
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
 	/**
 	  * FIXME
 	  * Put the right clock phandle here when available
@@ -51,21 +40,10 @@
 		clock-frequency = <19200000>;
 	};
 
-	/* HS USB Port 3 RESET */
-	hsusb3_reset: hsusb3_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb3_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Host PHY on PORT 3 */
 	hsusb3_phy: hsusb3_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb3_reset>;
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
 	};
 
 	leds {
@@ -84,7 +62,6 @@
 	pinctrl-0 = <
 			&twl6040_pins
 			&mcpdm_pins
-			&dmic_pins
 			&mcbsp1_pins
 			&mcbsp2_pins
 			&usbhost_pins
@@ -93,7 +70,7 @@
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
+			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 		>;
 	};
 
@@ -107,15 +84,6 @@
 		>;
 	};
 
-	dmic_pins: pinmux_dmic_pins {
-		pinctrl-single,pins = <
-			0x144 (PIN_INPUT | MUX_MODE0)		/* abedmic_din1.abedmic_din1 */
-			0x146 (PIN_INPUT | MUX_MODE0)		/* abedmic_din2.abedmic_din2 */
-			0x148 (PIN_INPUT | MUX_MODE0)		/* abedmic_din3.abedmic_din3 */
-			0x14a (PIN_OUTPUT | MUX_MODE0)		/* abedmic_clk1.abedmic_clk1 */
-		>;
-	};
-
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
 			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
@@ -153,25 +121,25 @@
 			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
 			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
 			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs */
+			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
 		>;
 	};
 
 	mcspi3_pins: pinmux_mcspi3_pins {
 		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
+			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
 		>;
 	};
 
 	mcspi4_pins: pinmux_mcspi4_pins {
 		pinctrl-single,pins = <
-			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
-			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
-			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
-			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
+			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
+			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
+			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
+			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
 		>;
 	};
 
@@ -271,6 +239,14 @@
 		reg = <0x48>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
 
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
@@ -334,15 +310,22 @@
 					ti,smps-range = <0x80>;
 				};
 
-				smps10_reg: smps10 {
+				smps10_out2_reg: smps10_out2 {
 					/* VBUS_5V_OTG */
-					regulator-name = "smps10";
+					regulator-name = "smps10_out2";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
@@ -470,6 +453,11 @@
 	phys = <0 &hsusb2_phy &hsusb3_phy>;
 };
 
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
 &mcspi1 {
 
 };
@@ -503,3 +491,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&uart5_pins>;
 };
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7cdea1b..fc3fad5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -21,6 +21,11 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -33,10 +38,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
+
+			operating-points = <
+				/* kHz    uV */
+				500000  880000
+				1000000 1060000
+				1500000 1250000
+			>;
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -52,7 +64,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <6144000>;
 	};
 
 	gic: interrupt-controller@48211000 {
@@ -276,6 +287,12 @@
 			ti,hwmods = "i2c5";
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
@@ -604,9 +621,10 @@
 			ti,hwmods = "wd_timer2";
 		};
 
-		emif1: emif@0x4c000000 {
+		emif1: emif@4c000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif1";
+			ti,no-idle-on-init;
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4c000000 0x400>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -615,9 +633,10 @@
 			hw-caps-temp-alert;
 		};
 
-		emif2: emif@0x4d000000 {
+		emif2: emif@4d000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif2";
+			ti,no-idle-on-init;
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4d000000 0x400>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -626,15 +645,19 @@
 			hw-caps-temp-alert;
 		};
 
-		omap_control_usb: omap-control-usb@4a002300 {
-			compatible = "ti,omap-control-usb";
-			reg = <0x4a002300 0x4>,
-			      <0x4a002370 0x4>;
-			reg-names = "control_dev_conf", "phy_power_usb";
-			ti,type = <2>;
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
 		};
 
-		omap_dwc3@4a020000 {
+		omap_control_usb3phy: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
+		};
+
+		usb3: omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
 			reg = <0x4a020000 0x10000>;
@@ -648,6 +671,7 @@
 				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				dr_mode = "peripheral";
 				tx-fifo-resize;
 			};
 		};
@@ -662,7 +686,7 @@
 			usb2_phy: usb2phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb2phy>;
 			};
 
 			usb3_phy: usb3phy@4a084400 {
@@ -671,7 +695,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb3phy>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 27ed9f5..7cf78af 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -76,6 +76,11 @@
 				compatible = "sirf,prima2-rsc";
 				reg = <0x88020000 0x1000>;
 			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+			};
 		};
 
 		mem-iobg {
@@ -86,10 +91,17 @@
 
 			memory-controller@90000000 {
 				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
+				reg = <0x90000000 0x2000>;
 				interrupts = <27>;
 				clocks = <&clks 5>;
 			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
 		};
 
 		disp-iobg {
@@ -287,7 +299,13 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb00d0000 0x10000>;
 				interrupts = <15>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <25>;
+				sirf,spi-dma-tx-channel = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 19>;
+				status = "disabled";
 			};
 
 			spi1: spi@b0170000 {
@@ -295,7 +313,13 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 20>;
+				status = "disabled";
 			};
 
 			i2c0: i2c@b00e0000 {
@@ -304,6 +328,8 @@
 				reg = <0xb00e0000 0x10000>;
 				interrupts = <24>;
 				clocks = <&clks 17>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 
 			i2c1: i2c@b00f0000 {
@@ -312,6 +338,8 @@
 				reg = <0xb00f0000 0x10000>;
 				interrupts = <25>;
 				clocks = <&clks 18>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 
 			tsc@b0110000 {
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
similarity index 100%
rename from arch/arm/boot/dts/msm8660-surf.dts
rename to arch/arm/boot/dts/qcom-msm8660-surf.dts
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
similarity index 100%
rename from arch/arm/boot/dts/msm8960-cdp.dts
rename to arch/arm/boot/dts/qcom-msm8960-cdp.dts
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
new file mode 100644
index 0000000..1fb20f2
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -0,0 +1,31 @@
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r7s72100.dtsi"
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	chosen {
+		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 0000000..46b82aa
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r7s72100";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@e8201000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xe8201000 0x1000>,
+			<0xe8202000 0x1000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
index f444624..9443e93 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -10,6 +10,7 @@
 
 /dts-v1/;
 /include/ "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "APE6EVM";
@@ -24,6 +25,34 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	vcc_mmc0: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0 Vcc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* Common 3.3V rail, used by several devices on APE6EVM */
+	ape6evm_fixed_3v3: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	lbsc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -33,6 +62,7 @@
 };
 
 &i2c5 {
+	status = "okay";
 	vdd_dvfs: max8973@1b {
 		compatible = "maxim,max8973";
 		reg = <0x1b>;
@@ -62,4 +92,47 @@
 		renesas,groups = "scifa0_data";
 		renesas,function = "scifa0";
 	};
+
+	mmc0_pins: mmcif {
+		renesas,groups = "mmc0_data8", "mmc0_ctrl";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sdhi1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+};
+
+&mmcif0 {
+	vmmc-supply = <&vcc_mmc0>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&sdhi0 {
+	vmmc-supply = <&vcc_sdhi0>;
+	bus-width = <4>;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	vmmc-supply = <&ape6evm_fixed_3v3>;
+	bus-width = <4>;
+	broken-cd;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 72f867e..91436b5 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -52,6 +52,7 @@
 };
 
 &i2c5 {
+	status = "okay";
 	vdd_dvfs: max8973@1b {
 		compatible = "maxim,max8973";
 		reg = <0x1b>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 658fcc5..287e047 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -78,6 +78,49 @@
 				<0 56 4>, <0 57 4>;
 	};
 
+	dmac: dma-multiplexer@0 {
+		compatible = "renesas,shdma-mux";
+		#dma-cells = <1>;
+		dma-channels = <20>;
+		dma-requests = <256>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma0: dma-controller@e6700020 {
+			compatible = "renesas,shdma-r8a73a4";
+			reg = <0 0xe6700020 0 0x89e0>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 220 4
+					0 200 4
+					0 201 4
+					0 202 4
+					0 203 4
+					0 204 4
+					0 205 4
+					0 206 4
+					0 207 4
+					0 208 4
+					0 209 4
+					0 210 4
+					0 211 4
+					0 212 4
+					0 213 4
+					0 214 4
+					0 215 4
+					0 216 4
+					0 217 4
+					0 218 4
+					0 219 4>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19";
+		};
+	};
+
 	thermal@e61f0000 {
 		compatible = "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
@@ -93,6 +136,7 @@
 		reg = <0 0xe6500000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 174 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@e6510000 {
@@ -102,6 +146,7 @@
 		reg = <0 0xe6510000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 175 0x4>;
+		status = "disabled";
 	};
 
 	i2c2: i2c@e6520000 {
@@ -111,6 +156,7 @@
 		reg = <0 0xe6520000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 176 0x4>;
+		status = "disabled";
 	};
 
 	i2c3: i2c@e6530000 {
@@ -120,6 +166,7 @@
 		reg = <0 0xe6530000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 177 0x4>;
+		status = "disabled";
 	};
 
 	i2c4: i2c@e6540000 {
@@ -129,6 +176,7 @@
 		reg = <0 0xe6540000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 178 0x4>;
+		status = "disabled";
 	};
 
 	i2c5: i2c@e60b0000 {
@@ -138,6 +186,7 @@
 		reg = <0 0xe60b0000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 179 0x4>;
+		status = "disabled";
 	};
 
 	i2c6: i2c@e6550000 {
@@ -147,6 +196,7 @@
 		reg = <0 0xe6550000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 184 0x4>;
+		status = "disabled";
 	};
 
 	i2c7: i2c@e6560000 {
@@ -156,6 +206,7 @@
 		reg = <0 0xe6560000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 185 0x4>;
+		status = "disabled";
 	};
 
 	i2c8: i2c@e6570000 {
@@ -165,6 +216,7 @@
 		reg = <0 0xe6570000 0 0x428>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 173 0x4>;
+		status = "disabled";
 	};
 
 	mmcif0: mmcif@ee200000 {
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index c638e4a..1c56c5e 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 /include/ "r8a7740.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "armadillo 800 eva reference";
@@ -34,6 +35,33 @@
 		regulator-boot-on;
 	};
 
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sdhi0>;
+
+		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0
+			  1800000 1>;
+
+		enable-active-high;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led1 {
@@ -49,9 +77,19 @@
 			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c0 {
+	status = "okay";
 	touchscreen: st1232@55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
@@ -76,4 +114,44 @@
 		renesas,groups = "intc_irq10";
 		renesas,function = "intc";
 	};
+
+	backlight_pins: backlight {
+		renesas,groups = "tpu0_to2_1";
+		renesas,function = "tpu0";
+	};
+
+	mmc0_pins: mmc0 {
+		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+};
+
+&tpu {
+	status = "okay";
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 44d3d52..ae1e230 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -131,6 +131,7 @@
 			      0 202 0x4
 			      0 203 0x4
 			      0 204 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@e6c20000 {
@@ -143,6 +144,7 @@
 			      0 71 0x4
 			      0 72 0x4
 			      0 73 0x4>;
+		status = "disabled";
 	};
 
 	pfc: pfc@e6050000 {
@@ -159,4 +161,37 @@
 		status = "disabled";
 		#pwm-cells = <3>;
 	};
+
+	mmcif0: mmcif@e6bd0000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 56 4
+				0 57 4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@e6850000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6850000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 117 4
+				0 118 4
+				0 119 4>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@e6860000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6860000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 121 4
+				0 122 4
+				0 123 4>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index 9bb903a..969e386 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -22,11 +22,36 @@
 	compatible = "renesas,bockw-reference", "renesas,r8a7778";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory {
 		device_type = "memory";
 		reg = <0x60000000 0x10000000>;
 	};
+
+	fixedregulator3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18300000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x18300000 0x1000>;
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin>;
+		interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+};
+
+&irqpin {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 3577aba..a6308a3 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -33,6 +33,25 @@
 		      <0xfe430000 0x100>;
 	};
 
+	/* irqpin: IRQ0 - IRQ3 */
+	irqpin: irqpin@fe78001c {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		status = "disabled"; /* default off */
+		reg =	<0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>;
+		interrupt-parent = <&gic>;
+		interrupts =   <0 27 0x4
+				0 28 0x4
+				0 29 0x4
+				0 30 0x4>;
+		sense-bitfield-width = <2>;
+	};
+
 	gpio0: gpio@ffc40000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc40000 0x2c>;
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 6d55083..ab4110a 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -42,8 +42,8 @@
 		pinctrl-names = "default";
 
 		phy-mode = "mii";
-		interrupt-parent = <&gic>;
-		interrupts = <0 28 0x4>;
+		interrupt-parent = <&irqpin0>;
+		interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */
 		reg-io-width = <4>;
 		vddvario-supply = <&fixedregulator3v3>;
 		vdd33a-supply = <&fixedregulator3v3>;
@@ -63,6 +63,10 @@
 	};
 };
 
+&irqpin0 {
+	status = "okay";
+};
+
 &pfc {
 	pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index ebbe507..19faeac 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -135,6 +135,7 @@
 	irqpin0: irqpin@fe780010 {
 		compatible = "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
+		status = "disabled";
 		interrupt-controller;
 		reg = <0xfe78001c 4>,
 			<0xfe780010 4>,
@@ -156,6 +157,7 @@
 		reg = <0xffc70000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 79 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@ffc71000 {
@@ -165,6 +167,7 @@
 		reg = <0xffc71000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 82 0x4>;
+		status = "disabled";
 	};
 
 	i2c2: i2c@ffc72000 {
@@ -174,6 +177,7 @@
 		reg = <0xffc72000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 80 0x4>;
+		status = "disabled";
 	};
 
 	i2c3: i2c@ffc73000 {
@@ -183,6 +187,7 @@
 		reg = <0xffc73000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 81 0x4>;
+		status = "disabled";
 	};
 
 	pfc: pfc@fffc0000 {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 413b4c2..ee845fa 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -24,6 +24,55 @@
 			reg = <0>;
 			clock-frequency = <1300000000>;
 		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+		};
 	};
 
 	gic: interrupt-controller@f1001000 {
@@ -127,6 +176,46 @@
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
 	};
 
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 287 0x4>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 288 0x4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 286 0x4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 290 0x4>;
+		status = "disabled";
+	};
+
 	mmcif0: mmcif@ee200000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
new file mode 100644
index 0000000..1ce5250
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree Source for the Koelsch board
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7791.dtsi"
+
+/ {
+	model = "Koelsch";
+	compatible = "renesas,koelsch", "renesas,r8a7791";
+
+	chosen {
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
new file mode 100644
index 0000000..fea5cfe
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Device Tree Source for the r8a7791 SoC
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r8a7791";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 0 4>,
+			      <0 1 4>,
+			      <0 2 4>,
+			      <0 3 4>,
+			      <0 12 4>,
+			      <0 13 4>,
+			      <0 14 4>,
+			      <0 15 4>,
+			      <0 16 4>,
+			      <0 17 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
new file mode 100644
index 0000000..035df40
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "bq Curie 2";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	soc {
+		uart0: serial@10124000 {
+			status = "okay";
+		};
+
+		uart1: serial@10126000 {
+			status = "okay";
+		};
+
+		uart2: serial@20064000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial@20068000 {
+			status = "okay";
+		};
+
+		vcc_sd0: fixed-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "sdmmc-supply";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			startup-delay-us = <100000>;
+		};
+
+		dwmmc@10214000 { /* sdmmc */
+			num-slots = <1>;
+			status = "okay";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+			vmmc-supply = <&vcc_sd0>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		dwmmc@10218000 { /* wifi */
+			num-slots = <1>;
+			status = "okay";
+			non-removable;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button@0 {
+				gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+			button@1 {
+				gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+				linux,code = <104>;
+				label = "GPIO Key Vol-";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <0>;
+				debounce-interval = <100>;
+			};
+			/* VOL+ comes somehow thru the ADC */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 56bfac9..be5d2b0 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -14,15 +14,12 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "skeleton.dtsi"
+#include "rk3xxx.dtsi"
 #include "rk3066a-clocks.dtsi"
 
 / {
 	compatible = "rockchip,rk3066a";
-	interrupt-parent = <&gic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -43,33 +40,6 @@
 	};
 
 	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		gic: interrupt-controller@1013d000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x1013d000 0x1000>,
-			      <0x1013c100 0x0100>;
-		};
-
-		L2: l2-cache-controller@10138000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10138000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		local-timer@1013c600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1013c600 0x20>;
-			interrupts = <GIC_PPI 13 0x304>;
-			clocks = <&dummy150m>;
-		};
-
 		timer@20038000 {
 			compatible = "snps,dw-apb-timer-osc";
 			reg = <0x20038000 0x100>;
@@ -191,17 +161,14 @@
 				uart0_xfer: uart0-xfer {
 					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_cts: uart0-cts {
 					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_rts: uart0-rts {
 					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -209,17 +176,14 @@
 				uart1_xfer: uart1-xfer {
 					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_cts: uart1-cts {
 					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_rts: uart1-rts {
 					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -227,7 +191,6 @@
 				uart2_xfer: uart2-xfer {
 					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 				/* no rts / cts for uart2 */
 			};
@@ -236,44 +199,36 @@
 				uart3_xfer: uart3-xfer {
 					rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_cts: uart3-cts {
 					rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_rts: uart3-rts {
 					rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd0 {
 				sd0_clk: sd0-clk {
 					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cmd: sd0-cmd {
 					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cd: sd0-cd {
 					rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_wp: sd0-wp {
 					rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus1: sd0-bus-width1 {
 					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus4: sd0-bus-width4 {
@@ -281,34 +236,28 @@
 							<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd1 {
 				sd1_clk: sd1-clk {
 					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cmd: sd1-cmd {
 					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cd: sd1-cd {
 					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_wp: sd1-wp {
 					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus1: sd1-bus-width1 {
 					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus4: sd1-bus-width4 {
@@ -316,75 +265,8 @@
 							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 		};
-
-		uart0: serial@10124000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10124000 0x400>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 8>;
-			status = "disabled";
-		};
-
-		uart1: serial@10126000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10126000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 10>;
-			status = "disabled";
-		};
-
-		uart2: serial@20064000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20064000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 12>;
-			status = "disabled";
-		};
-
-		uart3: serial@20068000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20068000 0x400>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 14>;
-			status = "disabled";
-		};
-
-		dwmmc@10214000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10214000 0x1000>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
-
-		dwmmc@10218000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10218000 0x1000>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi
new file mode 100644
index 0000000..b1b92dc
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-clocks.dtsi
@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			#clock-cells = <0>;
+		};
+
+		xin24m: xin24m {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy48m: dummy48m {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy150m: dummy150m {
+			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
+			#clock-cells = <0>;
+		};
+
+		clk_gates0: gate-clk@200000d0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d0 0x4>;
+			clocks = <&dummy150m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_core_periph", "gate_cpu_gpll",
+				"gate_ddrphy", "gate_aclk_cpu",
+				"gate_hclk_cpu", "gate_pclk_cpu",
+				"gate_atclk_cpu", "gate_aclk_core",
+				"reserved", "gate_i2s0",
+				"gate_i2s0_frac", "reserved",
+				"reserved", "gate_spdif",
+				"gate_spdif_frac", "gate_testclk";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates1: gate-clk@200000d4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d4 0x4>;
+			clocks = <&xin24m>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_timer0", "gate_timer1",
+				"gate_timer3", "gate_jtag",
+				"gate_aclk_lcdc1_src", "gate_otgphy0",
+				"gate_otgphy1", "gate_ddr_gpll",
+				"gate_uart0", "gate_frac_uart0",
+				"gate_uart1", "gate_frac_uart1",
+				"gate_uart2", "gate_frac_uart2",
+				"gate_uart3", "gate_frac_uart3";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates2: gate-clk@200000d8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d8 0x4>;
+			clocks = <&clk_gates2 1>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates2 3>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_periph_src", "gate_aclk_periph",
+				"gate_hclk_periph", "gate_pclk_periph",
+				"gate_smc", "gate_mac",
+				"gate_hsadc", "gate_hsadc_frac",
+				"gate_saradc", "gate_spi0",
+				"gate_spi1", "gate_mmc0",
+				"gate_mac_lbtest", "gate_mmc1",
+				"gate_emmc", "reserved";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates3: gate-clk@200000dc {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000dc 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&xin24m>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+				"gate_dclk_lcdc1", "gate_pclkin_cif0",
+				"gate_timer2", "gate_timer4",
+				"gate_hsicphy", "gate_cif0_out",
+				"gate_timer5", "gate_aclk_vepu",
+				"gate_hclk_vepu", "gate_aclk_vdpu",
+				"gate_hclk_vdpu", "reserved",
+				"gate_timer6", "gate_aclk_gpu_src";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates4: gate-clk@200000e0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e0 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+				 <&clk_gates2 1>, <&clk_gates2 1>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
+				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
+				"gate_aclk_strc_sys", "reserved",
+				"gate_aclk_intmem", "reserved",
+				"gate_hclk_imem1", "gate_hclk_imem0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates5: gate-clk@200000e4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e4 0x4>;
+			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 4>, <&clk_gates0 5>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates4 5>;
+
+			clock-output-names =
+				"gate_aclk_dmac1", "gate_aclk_dmac2",
+				"gate_pclk_efuse", "gate_pclk_tzpc",
+				"gate_pclk_grf", "gate_pclk_pmu",
+				"gate_hclk_rom", "gate_pclk_ddrupctl",
+				"gate_aclk_smc", "gate_hclk_nandc",
+				"gate_hclk_mmc0", "gate_hclk_mmc1",
+				"gate_hclk_emmc", "gate_hclk_otg0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates6: gate-clk@200000e8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e8 0x4>;
+			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
+				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
+				"gate_hclk_cif0", "gate_aclk_cif0",
+				"reserved", "reserved",
+				"gate_aclk_ipp", "gate_hclk_ipp",
+				"gate_hclk_rga", "gate_aclk_rga",
+				"gate_hclk_vio_bus", "gate_aclk_vio0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates7: gate-clk@200000ec {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000ec 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&dummy>,
+				 <&dummy>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates0 5>,
+				 <&dummy>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>;
+
+			clock-output-names =
+				"gate_hclk_emac", "gate_hclk_spdif",
+				"gate_hclk_i2s0_2ch", "gate_hclk_otg1",
+				"gate_hclk_hsic", "gate_hclk_hsadc",
+				"gate_hclk_pidf", "gate_pclk_timer0",
+				"reserved", "gate_pclk_timer2",
+				"gate_pclk_pwm01", "gate_pclk_pwm23",
+				"gate_pclk_spi0", "gate_pclk_spi1",
+				"gate_pclk_saradc", "gate_pclk_wdt";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates8: gate-clk@200000f0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f0 0x4>;
+			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&dummy>;
+
+			clock-output-names =
+				"gate_pclk_uart0", "gate_pclk_uart1",
+				"gate_pclk_uart2", "gate_pclk_uart3",
+				"gate_pclk_i2c0", "gate_pclk_i2c1",
+				"gate_pclk_i2c2", "gate_pclk_i2c3",
+				"gate_pclk_i2c4", "gate_pclk_gpio0",
+				"gate_pclk_gpio1", "gate_pclk_gpio2",
+				"gate_pclk_gpio3", "gate_aclk_gps";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates9: gate-clk@200000f4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f4 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_clk_core_dbg", "gate_pclk_dbg",
+				"gate_clk_trace", "gate_atclk",
+				"gate_clk_l2c", "gate_aclk_vio1",
+				"gate_pclk_publ", "gate_aclk_gpu";
+
+			#clock-cells = <1>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
new file mode 100644
index 0000000..3ba1968
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3188.dtsi"
+
+/ {
+	model = "Radxa Rock";
+
+	memory {
+		reg = <0x60000000 0x80000000>;
+	};
+
+	soc {
+		uart0: serial@10124000 {
+			status = "okay";
+		};
+
+		uart1: serial@10126000 {
+			status = "okay";
+		};
+
+		uart2: serial@20064000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial@20068000 {
+			status = "okay";
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button@0 {
+				gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			green {
+				gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			yellow {
+				gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			sleep {
+				gpios = <&gpio0 15 0>;
+				default-state = "off";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
new file mode 100644
index 0000000..1a26b03
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3xxx.dtsi"
+#include "rk3188-clocks.dtsi"
+
+/ {
+	compatible = "rockchip,rk3188";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x3>;
+		};
+	};
+
+	soc {
+		global-timer@1013c200 {
+			interrupts = <GIC_PPI 11 0xf04>;
+		};
+
+		local-timer@1013c600 {
+			interrupts = <GIC_PPI 13 0xf04>;
+		};
+
+		pinctrl@20008000 {
+			compatible = "rockchip,rk3188-pinctrl";
+			reg = <0x20008000 0xa0>,
+			      <0x20008164 0x1a0>;
+			reg-names = "base", "pull";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio0: gpio0@0x2000a000 {
+				compatible = "rockchip,rk3188-gpio-bank0";
+				reg = <0x2000a000 0x100>,
+				      <0x20004064 0x8>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 9>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio1: gpio1@0x2003c000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003c000 0x100>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 10>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio2@2003e000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003e000 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 11>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio3@20080000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20080000 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 12>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pcfg_pull_up: pcfg_pull_up {
+				bias-pull-up;
+			};
+
+			pcfg_pull_down: pcfg_pull_down {
+				bias-pull-down;
+			};
+
+			pcfg_pull_none: pcfg_pull_none {
+				bias-disable;
+			};
+
+			uart0 {
+				uart0_xfer: uart0-xfer {
+					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart0_cts: uart0-cts {
+					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart0_rts: uart0-rts {
+					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			uart1 {
+				uart1_xfer: uart1-xfer {
+					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart1_cts: uart1-cts {
+					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart1_rts: uart1-rts {
+					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			uart2 {
+				uart2_xfer: uart2-xfer {
+					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+				};
+				/* no rts / cts for uart2 */
+			};
+
+			uart3 {
+				uart3_xfer: uart3-xfer {
+					rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart3_cts: uart3-cts {
+					rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart3_rts: uart3-rts {
+					rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			sd0 {
+				sd0_clk: sd0-clk {
+					rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_cmd: sd0-cmd {
+					rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_cd: sd0-cd {
+					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_wp: sd0-wp {
+					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_pwr: sd0-pwr {
+					rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_bus1: sd0-bus-width1 {
+					rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_bus4: sd0-bus-width4 {
+					rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			sd1 {
+				sd1_clk: sd1-clk {
+					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_cmd: sd1-cmd {
+					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_cd: sd1-cd {
+					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_wp: sd1-wp {
+					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_bus1: sd1-bus-width1 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_bus4: sd1-bus-width4 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
new file mode 100644
index 0000000..0fcbcfd
--- /dev/null
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@1013d000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x1013d000 0x1000>,
+			      <0x1013c100 0x0100>;
+		};
+
+		L2: l2-cache-controller@10138000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10138000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		global-timer@1013c200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1013c200 0x20>;
+			interrupts = <GIC_PPI 11 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		local-timer@1013c600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1013c600 0x20>;
+			interrupts = <GIC_PPI 13 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		uart0: serial@10124000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10124000 0x400>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 8>;
+			status = "disabled";
+		};
+
+		uart1: serial@10126000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10126000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 10>;
+			status = "disabled";
+		};
+
+		uart2: serial@20064000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20064000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 12>;
+			status = "disabled";
+		};
+
+		uart3: serial@20068000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20068000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 14>;
+			status = "disabled";
+		};
+
+		dwmmc@10214000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10214000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+
+		dwmmc@10218000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10218000 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi
new file mode 100644
index 0000000..a7d1c8e
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6400.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Samsung's S3C6400 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6400";
+};
+
+&vic0 {
+	valid-mask = <0xfffffe1f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6400-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
new file mode 100644
index 0000000..57e00f9
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -0,0 +1,228 @@
+/*
+ * Samsung's S3C6410 based Mini6410 board device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for FriendlyARM Mini6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "FriendlyARM Mini6410 board based on S3C6410";
+	compatible = "friendlyarm,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "davicom,dm9000";
+			reg = <0x18000000 0x2 0x18000004 0x2>;
+			interrupt-parent = <&gpn>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			davicom,no-eeprom;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+		autorepeat;
+
+		button-k1 {
+			label = "K1";
+			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+			debounce-interval = <20>;
+		};
+
+		button-k2 {
+			label = "K2";
+			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+			debounce-interval = <20>;
+		};
+
+		button-k3 {
+			label = "K3";
+			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+			debounce-interval = <20>;
+		};
+
+		button-k4 {
+			label = "K4";
+			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+			debounce-interval = <20>;
+		};
+
+		button-k5 {
+			label = "K5";
+			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+			debounce-interval = <20>;
+		};
+
+		button-k6 {
+			label = "K6";
+			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+			debounce-interval = <20>;
+		};
+
+		button-k7 {
+			label = "K7";
+			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+			debounce-interval = <20>;
+		};
+
+		button-k8 {
+			label = "K8";
+			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led-1 {
+			label = "LED1";
+			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "LED2";
+			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-3 {
+			label = "LED3";
+			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			label = "LED4";
+			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 1000000 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_out>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&pinctrl0 {
+	gpio_leds: gpio-leds {
+		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys {
+		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
+				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
new file mode 100644
index 0000000..ecf35ec
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -0,0 +1,103 @@
+/*
+ * Samsung S3C6410 based SMDK6410 board device tree source.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK6410 board based on S3C6410";
+	compatible = "samsung,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "smsc,lan9115";
+			reg = <0x18000000 0x10000>;
+			interrupt-parent = <&gpn>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,force-internal-phy;
+		};
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi
new file mode 100644
index 0000000..eb4226b
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Samsung's S3C6410 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6410";
+
+	aliases {
+		i2c1 = &i2c1;
+	};
+};
+
+&vic0 {
+	valid-mask = <0xffffff7f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	i2c1: i2c@7f00f000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x7f00f000 0x1000>;
+		interrupt-parent = <&vic0>;
+		interrupts = <5>;
+		clock-names = "i2c";
+		clocks = <&clocks PCLK_IIC1>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
new file mode 100644
index 0000000..b1197d8
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -0,0 +1,687 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ * - pin control-related definitions
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
+ * listed as device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	2
+
+&pinctrl0 {
+	/*
+	 * Pin banks
+	 */
+
+	gpa: gpa {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc: gpc {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd: gpd {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe: gpe {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpf: gpf {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg: gpg {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph: gph {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi: gpi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpj: gpj {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk: gpk {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpl: gpl {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm: gpm {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpn: gpn {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpo: gpo {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp: gpp {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq: gpq {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/*
+	 * Pin groups
+	 */
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa-0", "gpa-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa-2", "gpa-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa-4", "gpa-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa-6", "gpa-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_0: ext-dma-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_1: ext-dma-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_0: irda-data-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_1: irda-data-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_sdbw: irda-sdbw {
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb-5", "gpb-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <6>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_cs: spi0-cs {
+		samsung,pins = "gpc-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi1_cs: spi1-cs {
+		samsung,pins = "gpc-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus1: sd0-bus1 {
+		samsung,pins = "gpg-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus4: sd0-bus4 {
+		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus1: sd1-bus1 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus4: sd1-bus4 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus8: sd1-bus8 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
+				"gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus1: sd2-bus1 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus4: sd2-bus4 {
+		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_cdclk: i2s0-cdclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_cdclk: i2s1-cdclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
+				"gph-8", "gph-9";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_cdclk: i2s2-cdclk {
+		/* S3C6410-only */
+		samsung,pins = "gph-7";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_extclk: pcm0-extclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_extclk: pcm1-extclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_0: ac97-bus-0 {
+		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_1: ac97-bus-1 {
+		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_port: cam-port {
+		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
+				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
+				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_rst: cam-rst {
+		samsung,pins = "gpf-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_field: cam-field {
+		/* S3C6410-only */
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm_extclk: pwm-extclk {
+		samsung,pins = "gpf-13";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpf-15";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	clkout0: clkout-0 {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_0: keypad-col0-0 {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_0: keypad-col1-0 {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_0: keypad-col2-0 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_0: keypad-col3-0 {
+		samsung,pins = "gph-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_0: keypad-col4-0 {
+		samsung,pins = "gph-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_0: keypad-col5-0 {
+		samsung,pins = "gph-5";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_0: keypad-col6-0 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_0: keypad-col7-0 {
+		samsung,pins = "gph-7";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_1: keypad-col0-1 {
+		samsung,pins = "gpl-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_1: keypad-col1-1 {
+		samsung,pins = "gpl-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_1: keypad-col2-1 {
+		samsung,pins = "gpl-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_1: keypad-col3-1 {
+		samsung,pins = "gpl-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_1: keypad-col4-1 {
+		samsung,pins = "gpl-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_1: keypad-col5-1 {
+		samsung,pins = "gpl-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_1: keypad-col6-1 {
+		samsung,pins = "gpl-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_1: keypad-col7-1 {
+		samsung,pins = "gpl-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_0: keypad-row0-0 {
+		samsung,pins = "gpk-8";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_0: keypad-row1-0 {
+		samsung,pins = "gpk-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_0: keypad-row2-0 {
+		samsung,pins = "gpk-10";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_0: keypad-row3-0 {
+		samsung,pins = "gpk-11";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_0: keypad-row4-0 {
+		samsung,pins = "gpk-12";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_0: keypad-row5-0 {
+		samsung,pins = "gpk-13";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_0: keypad-row6-0 {
+		samsung,pins = "gpk-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_0: keypad-row7-0 {
+		samsung,pins = "gpk-15";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_1: keypad-row0-1 {
+		samsung,pins = "gpn-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_1: keypad-row1-1 {
+		samsung,pins = "gpn-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_1: keypad-row2-1 {
+		samsung,pins = "gpn-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_1: keypad-row3-1 {
+		samsung,pins = "gpn-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_1: keypad-row4-1 {
+		samsung,pins = "gpn-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_1: keypad-row5-1 {
+		samsung,pins = "gpn-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_1: keypad-row6-1 {
+		samsung,pins = "gpn-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_1: keypad-row7-1 {
+		samsung,pins = "gpn-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data16: lcd-data-width16 {
+		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
+				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
+				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data18: lcd-data-width18 {
+		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
+				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
+				"gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
+				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	hsi_bus: hsi-bus {
+		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
+				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
new file mode 100644
index 0000000..4e3be4d
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -0,0 +1,199 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoC series device nodes are listed in this file.
+ * Particular SoCs from S3C64xx series can include this file and provide
+ * values for SoCs specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		pinctrl0 = &pinctrl0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s", "arm,arm1176";
+			reg = <0x0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic0: interrupt-controller@71200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@71300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		sdhci0: sdhci@7c200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c200000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@7c300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c300000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <25>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@7c400000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c400000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <17>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@7e004000 {
+			compatible = "samsung,s3c2410-wdt";
+			reg = <0x7e004000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks PCLK_WDT>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7f004000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x7f004000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <18>;
+			clock-names = "i2c";
+			clocks = <&clocks PCLK_IIC0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart1: serial@7f005400 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005400 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <6>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart2: serial@7f005800 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005800 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart3: serial@7f005c00 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005c00 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7f006000 {
+			compatible = "samsung,s3c6400-pwm";
+			reg = <0x7f006000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>, <24>, <25>, <27>, <28>;
+			clock-names = "timers";
+			clocks = <&clocks PCLK_PWM>;
+			samsung,pwm-outputs = <0>, <1>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pinctrl0: pinctrl@7f008000 {
+			compatible = "samsung,s3c64xx-pinctrl";
+			reg = <0x7f008000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+
+			pctrl_int_map: pinctrl-interrupt-map {
+				interrupt-map = <0 &vic0 0>,
+						<1 &vic0 1>,
+						<2 &vic1 0>,
+						<3 &vic1 1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,s3c64xx-wakeup-eint";
+				interrupts = <0>, <1>, <2>, <3>;
+				interrupt-parent = <&pctrl_int_map>;
+			};
+		};
+	};
+};
+
+#include "s3c64xx-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index b7f4961..5cdaba4 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -31,7 +31,6 @@
 		gpio3 = &pioD;
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
-		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -105,15 +104,6 @@
 				status = "disabled";
 			};
 
-			can0: can@f000c000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf000c000 0x300>;
-				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				status = "disabled";
-			};
-
 			tcb0: timer@f0010000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
@@ -166,15 +156,6 @@
 				status = "disabled";
 			};
 
-			macb0: ethernet@f0028000 {
-				compatible = "cdns,pc302-gem", "cdns,gem";
-				reg = <0xf0028000 0x100>;
-				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
-				status = "disabled";
-			};
-
 			isi: isi@f0034000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
@@ -195,19 +176,6 @@
 				#size-cells = <0>;
 			};
 
-			mmc2: mmc@f8004000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf8004000 0x600>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
-				dma-names = "rxtx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
 			spi1: spi@f8008000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -231,20 +199,6 @@
 				status = "disabled";
 			};
 
-			can1: can@f8010000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf8010000 0x300>;
-				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-			};
-
-			tcb1: timer@f8014000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf8014000 0x100>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-			};
-
 			adc0: adc@f8018000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf8018000 0x100>;
@@ -341,15 +295,6 @@
 				status = "disabled";
 			};
 
-			macb1: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				status = "disabled";
-			};
-
 			sha@f8034000 {
 				compatible = "atmel,sam9g46-sha";
 				reg = <0xf8034000 0x100>;
@@ -474,22 +419,6 @@
 					};
 				};
 
-				can0 {
-					pinctrl_can0_rx_tx: can0_rx_tx {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
-							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
-					};
-				};
-
-				can1 {
-					pinctrl_can1_rx_tx: can1_rx_tx {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
-							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
-					};
-				};
-
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
@@ -537,107 +466,6 @@
 					};
 				};
 
-				lcd {
-					pinctrl_lcd: lcd-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA24 periph A LCDPWM */
-							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA26 periph A LCDVSYNC */
-							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA27 periph A LCDHSYNC */
-							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA25 periph A LCDDISP */
-							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA29 periph A LCDDEN */
-							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA28 periph A LCDPCK */
-							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A LCDD0 pin */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A LCDD1 pin */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA2 periph A LCDD2 pin */
-							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA3 periph A LCDD3 pin */
-							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA4 periph A LCDD4 pin */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA5 periph A LCDD5 pin */
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA6 periph A LCDD6 pin */
-							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A LCDD7 pin */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A LCDD8 pin */
-							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A LCDD9 pin */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A LCDD10 pin */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A LCDD11 pin */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A LCDD12 pin */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A LCDD13 pin */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A LCDD14 pin */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A LCDD15 pin */
-							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC14 periph C LCDD16 pin */
-							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC13 periph C LCDD17 pin */
-							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC12 periph C LCDD18 pin */
-							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC11 periph C LCDD19 pin */
-							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC10 periph C LCDD20 pin */
-							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC15 periph C LCDD21 pin */
-							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PE27 periph C LCDD22 pin */
-							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PE28 periph C LCDD23 pin */
-					};
-				};
-
-				macb0 {
-					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
-							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
-					};
-					pinctrl_macb0_data_gmii: macb0_data_gmii {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
-							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
-							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
-							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
-							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
-							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
-							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
-							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
-					};
-					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
-					};
-					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
-						atmel,pins =
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
-							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
-							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
-					};
-
-				};
-
-				macb1 {
-					pinctrl_macb1_rmii: macb1_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
-					};
-				};
-
 				mmc0 {
 					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
 						atmel,pins =
@@ -675,21 +503,6 @@
 					};
 				};
 
-				mmc2 {
-					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
-					};
-					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
-						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
-					};
-				};
-
 				nand0 {
 					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
 						atmel,pins =
@@ -748,22 +561,6 @@
 					};
 				};
 
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
-							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
-							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
-					};
-				};
-
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi
new file mode 100644
index 0000000..7997dc9
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d31.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 027bac7..04eec0d 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d31.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D31-EK";
-	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi
new file mode 100644
index 0000000..39f8322
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d33.dtsi
@@ -0,0 +1,14 @@
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index 99bd0c8..cbd6a3f 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d33.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D33-EK";
-	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi
new file mode 100644
index 0000000..89cda2c
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d34.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index fb8ee11..878aa16 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d34.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D34-EK";
-	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi
new file mode 100644
index 0000000..d20cd71
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d35.dtsi
@@ -0,0 +1,18 @@
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index 509a53d..9089c7c 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -7,11 +7,12 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d35.dtsi"
 #include "sama5d3xmb.dtsi"
 
 / {
 	model = "Atmel SAMA5D35-EK";
-	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
new file mode 100644
index 0000000..8ed3260
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -0,0 +1,54 @@
+/*
+ * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
new file mode 100644
index 0000000..4d4f351
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
new file mode 100644
index 0000000..0ba8be3
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -0,0 +1,77 @@
+/*
+ * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "cdns,pc302-gem", "cdns,gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
new file mode 100644
index 0000000..01f52a7
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -0,0 +1,55 @@
+/*
+ * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd: lcd-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA24 periph A LCDPWM */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA26 periph A LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA27 periph A LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA25 periph A LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA29 periph A LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA28 periph A LCDPCK */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA2 periph A LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA3 periph A LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA4 periph A LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA5 periph A LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA6 periph A LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC14 periph C LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC13 periph C LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC12 periph C LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC11 periph C LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC10 periph C LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC15 periph C LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PE27 periph C LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PE28 periph C LCDD23 pin */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
new file mode 100644
index 0000000..38e88e3
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -0,0 +1,47 @@
+/*
+ * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
new file mode 100644
index 0000000..5264bb4
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -0,0 +1,27 @@
+/*
+ * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
new file mode 100644
index 0000000..98fcb2d
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -0,0 +1,53 @@
+/*
+ * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 31ed9e3..726a0f3 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -6,7 +6,6 @@
  *
  * Licensed under GPLv2 or later.
  */
-#include "sama5d3.dtsi"
 
 / {
 	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 2122306..8ee06dd 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -108,6 +108,7 @@
 };
 
 &i2c0 {
+	status = "okay";
 	as3711@40 {
 		compatible = "ams,as3711";
 		reg = <0x40>;
@@ -183,6 +184,7 @@
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &mmcif {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 3955c76..fcf2688 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -135,6 +135,7 @@
 			      0 168 0x4
 			      0 169 0x4
 			      0 170 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@e6822000 {
@@ -147,6 +148,7 @@
 			      0 52 0x4
 			      0 53 0x4
 			      0 54 0x4>;
+		status = "disabled";
 	};
 
 	i2c2: i2c@e6824000 {
@@ -159,6 +161,7 @@
 			      0 172 0x4
 			      0 173 0x4
 			      0 174 0x4>;
+		status = "disabled";
 	};
 
 	i2c3: i2c@e6826000 {
@@ -171,6 +174,7 @@
 			      0 184 0x4
 			      0 185 0x4
 			      0 186 0x4>;
+		status = "disabled";
 	};
 
 	i2c4: i2c@e6828000 {
@@ -183,6 +187,7 @@
 			      0 188 0x4
 			      0 189 0x4
 			      0 190 0x4>;
+		status = "disabled";
 	};
 
 	mmcif: mmcif@e6bd0000 {
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index e273fa9..6d09b8d 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -147,7 +147,7 @@
 							reg = <0x58>;
 						};
 
-						cfg_s2f_usr0_clk: cfg_s2f_usr0_clk {
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
@@ -198,7 +198,7 @@
 							reg = <0x98>;
 						};
 
-						s2f_usr1_clk: s2f_usr1_clk {
+						h2f_usr1_clk: h2f_usr1_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
@@ -235,7 +235,7 @@
 							reg = <0xD0>;
 						};
 
-						s2f_usr2_clk: s2f_usr2_clk {
+						h2f_usr2_clk: h2f_usr2_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&sdram_pll>;
@@ -243,197 +243,197 @@
 						};
 					};
 
-				mpu_periph_clk: mpu_periph_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mpuclk>;
-					fixed-divider = <4>;
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <4>;
 					};
 
-				mpu_l2_ram_clk: mpu_l2_ram_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mpuclk>;
-					fixed-divider = <2>;
+					mpu_l2_ram_clk: mpu_l2_ram_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <2>;
 					};
 
-				l4_main_clk: l4_main_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					clk-gate = <0x60 0>;
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						clk-gate = <0x60 0>;
 					};
 
-				l3_main_clk: l3_main_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
+					l3_main_clk: l3_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
 					};
 
-				l3_mp_clk: l3_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					div-reg = <0x64 0 2>;
-					clk-gate = <0x60 1>;
+					l3_mp_clk: l3_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 0 2>;
+						clk-gate = <0x60 1>;
 					};
 
-				l3_sp_clk: l3_sp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					div-reg = <0x64 2 2>;
-				};
-
-				l4_mp_clk: l4_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>, <&per_base_clk>;
-					div-reg = <0x64 4 3>;
-					clk-gate = <0x60 2>;
+					l3_sp_clk: l3_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 2 2>;
 					};
 
-				l4_sp_clk: l4_sp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>, <&per_base_clk>;
-					div-reg = <0x64 7 3>;
-					clk-gate = <0x60 3>;
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 4 3>;
+						clk-gate = <0x60 2>;
 					};
 
-				dbg_at_clk: dbg_at_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x68 0 2>;
-					clk-gate = <0x60 4>;
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 7 3>;
+						clk-gate = <0x60 3>;
 					};
 
-				dbg_clk: dbg_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x68 2 2>;
-					clk-gate = <0x60 5>;
+					dbg_at_clk: dbg_at_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 0 2>;
+						clk-gate = <0x60 4>;
 					};
 
-				dbg_trace_clk: dbg_trace_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x6C 0 3>;
-					clk-gate = <0x60 6>;
+					dbg_clk: dbg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 2 2>;
+						clk-gate = <0x60 5>;
 					};
 
-				dbg_timer_clk: dbg_timer_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					clk-gate = <0x60 7>;
+					dbg_trace_clk: dbg_trace_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x6C 0 3>;
+						clk-gate = <0x60 6>;
 					};
 
-				cfg_clk: cfg_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&cfg_s2f_usr0_clk>;
-					clk-gate = <0x60 8>;
+					dbg_timer_clk: dbg_timer_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						clk-gate = <0x60 7>;
 					};
 
-				s2f_user0_clk: s2f_user0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&cfg_s2f_usr0_clk>;
-					clk-gate = <0x60 9>;
+					cfg_clk: cfg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 8>;
 					};
 
-				emac_0_clk: emac_0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&emac0_clk>;
-					clk-gate = <0xa0 0>;
+					h2f_user0_clk: h2f_user0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 9>;
 					};
 
-				emac_1_clk: emac_1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&emac1_clk>;
-					clk-gate = <0xa0 1>;
+					emac_0_clk: emac_0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac0_clk>;
+						clk-gate = <0xa0 0>;
 					};
 
-				usb_mp_clk: usb_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 2>;
-					div-reg = <0xa4 0 3>;
+					emac_1_clk: emac_1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac1_clk>;
+						clk-gate = <0xa0 1>;
 					};
 
-				spi_m_clk: spi_m_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 3>;
-					div-reg = <0xa4 3 3>;
+					usb_mp_clk: usb_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 2>;
+						div-reg = <0xa4 0 3>;
 					};
 
-				can0_clk: can0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 4>;
-					div-reg = <0xa4 6 3>;
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 3>;
+						div-reg = <0xa4 3 3>;
 					};
 
-				can1_clk: can1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 5>;
-					div-reg = <0xa4 9 3>;
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 4>;
+						div-reg = <0xa4 6 3>;
 					};
 
-				gpio_db_clk: gpio_db_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 6>;
-					div-reg = <0xa8 0 24>;
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 5>;
+						div-reg = <0xa4 9 3>;
 					};
 
-				s2f_user1_clk: s2f_user1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&s2f_usr1_clk>;
-					clk-gate = <0xa0 7>;
+					gpio_db_clk: gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 6>;
+						div-reg = <0xa8 0 24>;
 					};
 
-				sdmmc_clk: sdmmc_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 8>;
+					h2f_user1_clk: h2f_user1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr1_clk>;
+						clk-gate = <0xa0 7>;
 					};
 
-				nand_x_clk: nand_x_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 9>;
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 8>;
 					};
 
-				nand_clk: nand_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 10>;
-					fixed-divider = <4>;
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 9>;
 					};
 
-				qspi_clk: qspi_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
-					clk-gate = <0xa0 11>;
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 10>;
+						fixed-divider = <4>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+						clk-gate = <0xa0 11>;
 					};
 				};
 			};
@@ -473,6 +473,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfffec600 0x100>;
 			interrupts = <1 13 0xf04>;
+			clocks = <&mpu_periph_clk>;
 		};
 
 		timer0: timer0@ffc08000 {
@@ -516,9 +517,9 @@
 		};
 
 		rstmgr@ffd05000 {
-				compatible = "altr,rst-mgr";
-				reg = <0xffd05000 0x1000>;
-			};
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+		};
 
 		sysmgr@ffd08000 {
 				compatible = "altr,sys-mgr";
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
new file mode 100644
index 0000000..a85b404
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/include/ "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		serial0@ffc02000 {
+			clock-frequency = <100000000>;
+		};
+
+		serial1@ffc03000 {
+			clock-frequency = <100000000>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+
+		timer0@ffc08000 {
+			clock-frequency = <100000000>;
+		};
+
+		timer1@ffc09000 {
+			clock-frequency = <100000000>;
+		};
+
+		timer2@ffd00000 {
+			clock-frequency = <25000000>;
+		};
+
+		timer3@ffd01000 {
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
new file mode 100644
index 0000000..5beffb2
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -0,0 +1,40 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
similarity index 77%
rename from arch/arm/boot/dts/socfpga_cyclone5.dts
rename to arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 973999d..a8716f6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -19,26 +19,6 @@
 /include/ "socfpga.dtsi"
 
 / {
-	model = "Altera SOCFPGA Cyclone V";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-
 	soc {
 		clkmgr@ffd04000 {
 			clocks {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
new file mode 100644
index 0000000..2ee52ab
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,40 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
new file mode 100644
index 0000000..50b99a2
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -0,0 +1,37 @@
+/*
+ *  Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic SoCkit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 1c1091e..7da99fe 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/dbx500-prcmu.h>
 #include "skeleton.dtsi"
 
 / {
@@ -42,16 +43,56 @@
 			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+
+		clocks {
+			compatible = "stericsson,u8500-clks";
+
+			prcmu_clk: prcmu-clock {
+				#clock-cells = <1>;
+			};
+
+			prcc_pclk: prcc-periph-clock {
+				#clock-cells = <2>;
+			};
+
+			prcc_kclk: prcc-kernel-clock {
+				#clock-cells = <2>;
+			};
+
+			rtc_clk: rtc32k-clock {
+				#clock-cells = <0>;
+			};
+
+			smp_twd_clk: smp-twd-clock {
+				#clock-cells = <0>;
+			};
+		};
+
+		mtu@a03c6000 {
+			/* Nomadik System Timer */
+			compatible = "st,nomadik-mtu";
+			reg = <0xa03c6000 0x1000>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+			clock-names = "timclk", "apb_pclk";
+		};
+
 		timer@a0410600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xa0410600 0x20>;
 			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+
+			clocks = <&smp_twd_clk>;
 		};
 
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rtc_clk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpio0: gpio@8012e000 {
@@ -65,6 +106,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <0>;
+
+			clocks = <&prcc_pclk 1 9>;
 		};
 
 		gpio1: gpio@8012e080 {
@@ -78,6 +121,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <1>;
+
+			clocks = <&prcc_pclk 1 9>;
 		};
 
 		gpio2: gpio@8000e000 {
@@ -91,6 +136,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <2>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio3: gpio@8000e080 {
@@ -104,6 +151,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <3>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio4: gpio@8000e100 {
@@ -117,6 +166,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <4>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio5: gpio@8000e180 {
@@ -130,6 +181,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <5>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio6: gpio@8011e000 {
@@ -143,6 +196,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <6>;
+
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio7: gpio@8011e080 {
@@ -156,6 +211,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <7>;
+
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio8: gpio@a03fe000 {
@@ -169,6 +226,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <8>;
+
+			clocks = <&prcc_pclk 5 1>;
 		};
 
 		pinctrl {
@@ -177,8 +236,7 @@
 		};
 
 		usb_per5@a03e0000 {
-			compatible = "stericsson,db8500-musb",
-				"mentor,musb";
+			compatible = "stericsson,db8500-musb";
 			reg = <0xa03e0000 0x10000>;
 			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
@@ -210,6 +268,8 @@
 				    "iep_6_14", "oep_6_14",
 				    "iep_7_15", "oep_7_15",
 				    "iep_8",    "oep_8";
+
+			clocks = <&prcc_pclk 5 0>;
 		};
 
 		dma: dma-controller@801C0000 {
@@ -220,6 +280,8 @@
 
 			#dma-cells = <3>;
 			memcpy-channels = <56 57 58 59 60>;
+
+			clocks = <&prcmu_clk PRCMU_DMACLK>;
 		};
 
 		prcmu: prcmu@80157000 {
@@ -238,6 +300,13 @@
 				reg = <0x80157450 0xC>;
 			};
 
+			cpufreq {
+				compatible = "stericsson,cpufreq-ux500";
+				clocks = <&prcmu_clk PRCMU_ARMSS>;
+				clock-names = "armss";
+				status = "disabled";
+			};
+
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
@@ -559,65 +628,74 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		ssp@80002000 {
@@ -626,7 +704,80 @@
 			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disabled";
+			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+			clock-names = "ssp0clk", "apb_pclk";
+			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+			       <&dma 8 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		ssp@80003000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80003000 0x1000>;
+			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+			clock-names = "ssp1clk", "apb_pclk";
+			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+			       <&dma 9 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@8011a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8011a000 0x1000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+			clock-names = "spi0clk", "apb_pclk";
+			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+			       <&dma 0 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80112000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80112000 0x1000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+			clock-names = "spi1clk", "apb_pclk";
+			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+			       <&dma 35 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80111000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80111000 0x1000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+			clock-names = "spi2clk", "apb_pclk";
+			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+			       <&dma 33 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80129000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80129000 0x1000>;
+			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+			clock-names = "spi3clk", "apb_pclk";
+			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+			       <&dma 40 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
 		};
 
 		uart@80120000 {
@@ -638,6 +789,9 @@
 			       <&dma 13 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -650,6 +804,9 @@
 			       <&dma 12 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -662,6 +819,9 @@
 			       <&dma 11 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -674,6 +834,9 @@
 			       <&dma 29 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -686,6 +849,9 @@
 			       <&dma 32 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -698,6 +864,9 @@
 			       <&dma 28 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -705,6 +874,10 @@
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -717,6 +890,9 @@
 			       <&dma 42 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -724,6 +900,10 @@
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
 			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -732,6 +912,10 @@
 			reg = <0x80123000 0x1000>;
 			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -740,6 +924,10 @@
 			reg = <0x80124000 0x1000>;
 			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -749,6 +937,10 @@
 			reg = <0x80117000 0x1000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -757,6 +949,10 @@
 			reg = <0x80125000 0x1000>;
 			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -772,7 +968,7 @@
 		cpufreq-cooling {
 			compatible = "stericsson,db8500-cpufreq-cooling";
 			status = "disabled";
-		 };
+		};
 
 		vmmci: regulator-gpio {
 			compatible = "regulator-gpio";
@@ -797,6 +993,7 @@
 			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 
 			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 1>;
 		};
 
 		hash@a03c2000 {
@@ -804,6 +1001,7 @@
 			reg = <0xa03c2000 0x1000>;
 
 			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
similarity index 95%
rename from arch/arm/boot/dts/ste-stuib.dtsi
rename to arch/arm/boot/dts/ste-href-stuib.dtsi
index 524e332..76704ec 100644
--- a/arch/arm/boot/dts/ste-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -57,7 +57,6 @@
 			bu21013_tp@5c {
 				compatible = "rohm,bu21013_tp";
 				reg = <0x5c>;
-				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
 				rohm,touch-max-x = <384>;
@@ -68,7 +67,6 @@
 			bu21013_tp@5d {
 				compatible = "rohm,bu21013_tp";
 				reg = <0x5d>;
-				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
 				rohm,touch-max-x = <384>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
new file mode 100644
index 0000000..76d3ef1
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the TVK1281618 UIB
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	soc {
+		/* Add Synaptics touch screen, TC35892 keypad etc here */
+		i2c@80004000 {
+			tc3589x@44 {
+				compatible = "tc3589x";
+				reg = <0x44>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 370e03f..aa3f020 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -41,28 +41,6 @@
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				compatible = "tc3589x";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
 		i2c@80128000 {
 			lp5521@33 {
 				compatible = "national,lp5521";
@@ -72,6 +50,7 @@
 				chan0 {
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					linux,default-trigger = "heartbeat";
 				};
 				chan1 {
 					led-cur = /bits/ 8 <0x2f>;
@@ -102,7 +81,7 @@
 			};
 			bh1780@29 {
 				compatible = "rohm,bh1780gli";
-				reg = <0x33>;
+				reg = <0x29>;
 			};
 		};
 
@@ -167,89 +146,11 @@
 		};
 
 		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
-			};
-
 			ab8500 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+				};
+
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
new file mode 100644
index 0000000..2b1cb5b
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
new file mode 100644
index 0000000..59523f8
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dtsi
similarity index 60%
rename from arch/arm/boot/dts/ste-hrefprev60.dts
rename to arch/arm/boot/dts/ste-hrefprev60.dtsi
index d8d3b99..b2cd7bc 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -7,17 +7,14 @@
  *
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF+ prior to the v60 variant.
  */
 
-/dts-v1/;
 #include "ste-dbx5x0.dtsi"
 #include "ste-href.dtsi"
-#include "ste-stuib.dtsi"
 
 / {
-	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
-	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
 	gpio_keys {
 		button@1 {
 			gpios = <&tc3589x_gpio 7 0x4>;
@@ -25,24 +22,30 @@
 	};
 
 	soc {
-		prcmu@80157000 {
-			ab8500@5 {
-				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
-				};
-			};
-		};
-
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
 				reg = <0x33>;
 			};
-		};
 
-		i2c@80110000 {
-			bu21013_tp@5c {
-				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
new file mode 100644
index 0000000..8c6a2de
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the ST UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and ST UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
new file mode 100644
index 0000000..d53cccd
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dts b/arch/arm/boot/dts/ste-hrefv60plus.dts
deleted file mode 100644
index 6e52ebb..0000000
--- a/arch/arm/boot/dts/ste-hrefv60plus.dts
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-#include "ste-href.dtsi"
-#include "ste-stuib.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	gpio_keys {
-		button@1 {
-			gpios = <&gpio6 25 0x4>;
-		};
-	};
-
-	soc {
-		i2c@80110000 {
-			bu21013_tp@0x5c {
-				reset-gpio = <&gpio4 15 0x4>;
-			};
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-			cd-gpios  = <&tc3589x_gpio 3 0x4>;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-
-			status = "okay";
-		};
-
-		// PoP:ed eMMC
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
-			};
-
-			ab8500 {
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
new file mode 100644
index 0000000..aed511b
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "ste-dbx5x0.dtsi"
+#include "ste-href.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	gpio_keys {
+		button@1 {
+			gpios = <&gpio5 25 0x4>;
+		};
+	};
+
+	soc {
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&gpio2 31 0x4>; // 95
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 9169d30..79425e3 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -653,6 +653,7 @@
 		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 		clocks = <&hclksmc>;
 		status = "okay";
+		timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
 
 		partition@0 {
 		label = "X-Loader(NAND)";
@@ -707,8 +708,14 @@
 		pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
 
 		stw4811@2d {
-			   compatible = "st,stw4811";
-			   reg = <0x2d>;
+			compatible = "st,stw4811";
+			reg = <0x2d>;
+			vmmc_regulator: vmmc {
+				compatible = "st,stw481x-vmmc";
+				regulator-name = "VMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
 		};
 	};
 
@@ -839,6 +846,7 @@
 			cd-inverted;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
+			vmmc-supply = <&vmmc_regulator>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index f1fc128..f0b39f8 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -111,12 +111,13 @@
 				vdd33a-supply = <&en_3v3_reg>;
 				vddvario-supply = <&db8500_vape_reg>;
 
-
 				reg-shift = <1>;
 				reg-io-width = <2>;
 				smsc,force-internal-phy;
 				smsc,irq-active-high;
 				smsc,irq-push-pull;
+
+				clocks = <&prcc_pclk 3 0>;
 			};
 		};
 
@@ -170,86 +171,8 @@
 		};
 
 		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
+			cpufreq {
+				status = "okay";
 			};
 
 			thermal@801573c0 {
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index c32770a..319cc6b 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -266,6 +266,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 3b4a057..5247674 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -255,6 +255,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index f6091dc..ce8ef2a 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -222,6 +222,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index f244f5f..c1751a6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -175,7 +175,7 @@
 		apb2_gates: apb2_gates@01c2006c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
-			reg = <0x01c2006c 0x8>;
+			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
 					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 15e625e..5c51cb8 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -48,6 +48,18 @@
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
new file mode 100644
index 0000000..8a1009d
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		pinctrl@01c20800 {
+			led_pins_cubietruck: led_pins@0 {
+				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubietruck>;
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 0>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 0>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 9e77855..ead3013 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -60,6 +60,24 @@
 			pinctrl-0 = <&uart7_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 80559cb..e46cfed 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -215,6 +215,27 @@
 				allwinner,pull = <0>;
 			};
 
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			emac_pins_a: emac0@0 {
 				allwinner,pins = "PA0", "PA1", "PA2",
 						"PA3", "PA4", "PA5", "PA6",
@@ -244,6 +265,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -324,6 +350,51 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <0 7 1>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <0 8 1>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <0 9 1>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <0 88 1>;
+			clocks = <&apb1_gates 3>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@01c2bc00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <0 89 1>;
+			clocks = <&apb1_gates 15>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 6023028..cb5ec23 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "tegra114.dtsi"
 
 / {
@@ -738,6 +739,14 @@
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&palmas_ldo6_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 
 	i2c@7000d000 {
@@ -947,7 +956,7 @@
 						regulator-max-microvolt = <1800000>;
 					};
 
-					ldo6 {
+					palmas_ldo6_reg: ldo6 {
 						regulator-name = "vdd-sensor-2v85";
 						regulator-min-microvolt = <2850000>;
 						regulator-max-microvolt = <2850000>;
@@ -1011,6 +1020,19 @@
 				interrupt-parent = <&palmas>;
 				interrupts = <8 0>;
 			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
 		};
 	};
 
@@ -1081,26 +1103,26 @@
 		home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <102>; /* KEY_HOME */
+			linux,code = <KEY_HOME>;
 		};
 
 		power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <116>; /* KEY_POWER */
+			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
 
 		volume_down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
 		volume_up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
+			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 2905145..8d42787 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -318,9 +318,9 @@
 
 	iommu {
 		compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
-		reg = <0x7000f010 0x02c
-		       0x7000f1f0 0x010
-		       0x7000f228 0x074>;
+		reg = <0x70019010 0x02c
+		       0x700191f0 0x010
+		       0x70019228 0x074>;
 		nvidia,#asids = <4>;
 		dma-window = <0 0x40000000>;
 		nvidia,swgroups = <0x18659fe>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
new file mode 100644
index 0000000..431d67a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -0,0 +1,27 @@
+/dts-v1/;
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
new file mode 100644
index 0000000..b741300
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -0,0 +1,149 @@
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra124";
+	interrupt-parent = <&gic>;
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x1000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006400 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x7000e400 0x400>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index e19dbf2..5ea7dfa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -294,9 +294,10 @@
 			};
 		};
 
-		nct1008 {
+		temperature-sensor@4c {
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
 		};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 0022c12..2bd55cf 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -136,12 +136,13 @@
 		gr3d {
 			compatible = "nvidia,tegra30-gr3d";
 			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car 24 &tegra_car 98>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D
+				  &tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 		};
 
 		dc@54200000 {
-			compatible = "nvidia,tegra30-dc";
+			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ae6a17a..fb1b2ec 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -23,6 +23,22 @@
 		compatible = "ti,twl4030-wdt";
 	};
 
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl4030-vaux1";
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl4030-vaux3";
+	};
+
+	vaux4: regulator-vaux4 {
+		compatible = "ti,twl4030-vaux4";
+	};
+
 	vcc: regulator-vdd1 {
 		compatible = "ti,twl4030-vdd1";
 		regulator-min-microvolt = <600000>;
@@ -35,10 +51,20 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vpll2: regulator-vpll2 {
-		compatible = "ti,twl4030-vpll2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+	vio: regulator-vio {
+		compatible = "ti,twl4030-vio";
+	};
+
+	vintana1: regulator-vintana1 {
+		compatible = "ti,twl4030-vintana1";
+	};
+
+	vintana2: regulator-vintana2 {
+		compatible = "ti,twl4030-vintana2";
+	};
+
+	vintdig: regulator-vintdig {
+		compatible = "ti,twl4030-vintdig";
 	};
 
 	vmmc1: regulator-vmmc1 {
@@ -65,6 +91,16 @@
 		compatible = "ti,twl4030-vusb3v1";
 	};
 
+	vpll1: regulator-vpll1 {
+		compatible = "ti,twl4030-vpll1";
+	};
+
+	vpll2: regulator-vpll2 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vsim: regulator-vsim {
 		compatible = "ti,twl4030-vsim";
 		regulator-min-microvolt = <1800000>;
@@ -86,6 +122,7 @@
 		usb1v8-supply = <&vusb1v8>;
 		usb3v1-supply = <&vusb3v1>;
 		usb_mode = <1>;
+		#phy-cells = <0>;
 	};
 
 	twl_pwm: pwm {
@@ -97,4 +134,9 @@
 		compatible = "ti,twl4030-pwmled";
 		#pwm-cells = <2>;
 	};
+
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
 };
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
new file mode 100644
index 0000000..a4fa570
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+	/*
+	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
+	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
+	 * connected to the fref_clk0_out.sys_drm_msecure line.
+	 * Therefore, configure the defaults for the SYS_NIRQ1 and
+	 * fref_clk0_out.sys_drm_msecure pins here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&twl6030_pins
+		&twl6030_wkup_pins
+	>;
+};
+
+&omap4_pmx_wkup {
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
new file mode 100644
index 0000000..c42e4f9
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1_1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 1a58678..c8047ca 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -36,6 +36,23 @@
 
 };
 
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0_1>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 67d929c..d31ce1b 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -123,6 +123,18 @@
 				status = "disabled";
 			};
 
+			dspi0: dspi0@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <0 67 0x04>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <5>;
+				status = "disabled";
+			};
+
 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 8c60f47..eaa9cf4 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -6,7 +6,6 @@
 
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
-obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c
deleted file mode 100644
index 6cb362e5..0000000
--- a/arch/arm/common/via82c505.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-
-#include <asm/mach/pci.h>
-
-#define MAX_SLOTS		7
-
-#define CONFIG_CMD(bus, devfn, where)   (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		      int size, u32 *value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		*value=inb(0xCFC + (where&3));
-		break;
-	case 2:
-		*value=inw(0xCFC + (where&2));
-		break;
-	case 4:
-		*value=inl(0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		       int size, u32 value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		outb(value, 0xCFC + (where&3));
-		break;
-	case 2:
-		outw(value, 0xCFC + (where&2));
-		break;
-	case 4:
-		outl(value, 0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops via82c505_ops = {
-	.read	= via82c505_read_config,
-	.write	= via82c505_write_config,
-};
-
-void __init via82c505_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: VIA 82c505\n");
-	if (!request_region(0xA8,2,"via config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
-		return;
-	}
-	if (!request_region(0xCF8,8,"pci config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
-		release_region(0xA8, 2);
-		return;
-	}
-
-	/* Enable compatible Mode */
-	outb(0x96,0xA8);
-	outb(0x18,0xA9);
-	outb(0x93,0xA8);
-	outb(0xd0,0xA9);
-
-}
-
-int __init via82c505_setup(int nr, struct pci_sys_data *sys)
-{
-	return (nr == 0);
-}
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index 6e49310..287ac1d 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -25,10 +24,9 @@
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_743622=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
@@ -50,7 +48,6 @@
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-CONFIG_ARPD=y
 CONFIG_SYN_COOKIES=y
 CONFIG_TCP_MD5SIG=y
 CONFIG_IPV6=y
@@ -95,7 +92,6 @@
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_TEST=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -117,12 +113,12 @@
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
index e7e9494..b38cd10 100644
--- a/arch/arm/configs/bockw_defconfig
+++ b/arch/arm/configs/bockw_defconfig
@@ -91,6 +91,10 @@
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_HSPI=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 806005a..6ac5ea7 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,15 +1,14 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_EP93XX=y
 CONFIG_CRUNCH=y
@@ -47,11 +46,8 @@
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -67,15 +63,14 @@
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_EP93XX_ETH=y
 CONFIG_USB_RTL8150=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -86,9 +81,9 @@
 CONFIG_EP93XX_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
@@ -100,24 +95,18 @@
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 5d488c2..8d0c5a0 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -132,7 +132,6 @@
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_IMX=y
@@ -188,22 +187,33 @@
 CONFIG_SND_SOC_EUKREA_TLV320=y
 CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_MC13XXX=y
@@ -246,7 +256,6 @@
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
@@ -261,6 +270,7 @@
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
+CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index a8314c3..5bae195 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,15 +1,17 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_ARCH_INTEGRATOR_CP=y
+CONFIG_INTEGRATOR_IMPD1=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_ARM922T=y
@@ -18,12 +20,9 @@
 CONFIG_CPU_ARM1022=y
 CONFIG_CPU_ARM1026=y
 CONFIG_PCI=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
+# CONFIG_ATAGS is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
@@ -44,24 +43,20 @@
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_E100=y
 CONFIG_SMC91X=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_ARMCLCD=y
@@ -71,19 +66,23 @@
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL030=y
+CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_EXT2_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 1f36b82..9943e5d 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -123,7 +123,9 @@
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
+CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig
new file mode 100644
index 0000000..825c16d
--- /dev/null
+++ b/arch/arm/configs/koelsch_defconfig
@@ -0,0 +1,54 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+# CONFIG_BLOCK is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_MACH_KOELSCH=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig
index e777ef2..35bff5e 100644
--- a/arch/arm/configs/lager_defconfig
+++ b/arch/arm/configs/lager_defconfig
@@ -89,6 +89,8 @@
 CONFIG_RCAR_THERMAL=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 000e920..5cc6360 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -92,6 +92,8 @@
 CONFIG_VIDEO_RCAR_VIN=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
 CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 119fc37..4a5903e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -6,6 +6,7 @@
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_KEYSTONE=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 4555c02..6150108 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -76,7 +76,6 @@
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_TSC2007=m
 # CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -91,7 +90,6 @@
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MXS=y
-CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -115,9 +113,12 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
 CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_MXS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 254cf05..98a50c3 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -1,14 +1,13 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -20,22 +19,21 @@
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_LEDS=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -61,8 +59,6 @@
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_BT=m
@@ -77,14 +73,13 @@
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y
-CONFIG_CONNECTOR=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_CONNECTOR=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_OOPS=y
 CONFIG_MTD_CFI=y
@@ -98,32 +93,40 @@
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SENSORS_LIS3LV02D=m
 CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_BMP085_I2C=m
+CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_MD=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
 CONFIG_KS8851=y
 CONFIG_KS8851_MLL=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_TI_CPSW=y
+CONFIG_AT803X_PHY=y
+CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_WL_TI=y
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SPI=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
@@ -133,7 +136,6 @@
 CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -143,8 +145,7 @@
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -158,31 +159,31 @@
 CONFIG_W1=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_LM75=m
-CONFIG_WATCHDOG=y
 CONFIG_THERMAL=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
 CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_CPU_THERMAL=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
+CONFIG_DRA752_THERMAL=y
+CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
-CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP_LCD_VGA=y
 CONFIG_OMAP2_DSS=m
-CONFIG_OMAP2_DSS_RFBI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
@@ -194,12 +195,8 @@
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
-CONFIG_DISPLAY_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
@@ -216,14 +213,14 @@
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_DWC3=m
 CONFIG_USB_TEST=y
-CONFIG_USB_PHY=y
 CONFIG_NOP_USB_XCEIV=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_USB3=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
@@ -232,7 +229,6 @@
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_SDIO_UART=y
-CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
@@ -252,11 +248,8 @@
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
-CONFIG_TI_SOC_THERMAL=y
-CONFIG_TI_THERMAL=y
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_THERMAL=y
-CONFIG_DRA752_THERMAL=y
+CONFIG_EXTCON=y
+CONFIG_EXTCON_PALMAS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
@@ -275,23 +268,18 @@
 CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
@@ -300,9 +288,6 @@
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_SOC_OMAP5=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_DAVINCI_CPDMA=y
-CONFIG_TI_CPSW=y
-CONFIG_AT803X_PHY=y
-CONFIG_SOC_DRA7XX=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
deleted file mode 100644
index e319b2c..0000000
--- a/arch/arm/configs/shark_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SHARK=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
new file mode 100644
index 0000000..d57a85b
--- /dev/null
+++ b/arch/arm/configs/sunxi_defconfig
@@ -0,0 +1,61 @@
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SMP=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SUN4I_EMAC=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_COMMON_CLK_DEBUG=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_NLS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index ea042e8..4934295 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -27,6 +27,7 @@
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
+CONFIG_ARCH_TEGRA_124_SOC=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
@@ -41,9 +42,11 @@
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
+CONFIG_NEON=y
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -129,6 +132,7 @@
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
@@ -223,6 +227,7 @@
 CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
+CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index a0025dc..ac632cc 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,4 +1,3 @@
-CONFIG_HIGHMEM=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
@@ -16,6 +15,9 @@
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -68,8 +70,8 @@
 CONFIG_WATCHDOG=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
-CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -78,10 +80,8 @@
 CONFIG_USB=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_UX500=y
-CONFIG_USB_PHY=y
 CONFIG_AB8500_USB=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -116,12 +116,12 @@
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_DEV_UX500=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index f2de51f..f489fda 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
@@ -8,11 +7,9 @@
 CONFIG_CPUSETS=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
@@ -23,14 +20,22 @@
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_ARCH_VEXPRESS_DCSCB=y
+CONFIG_ARCH_VEXPRESS_TC2_PM=y
 # CONFIG_SWP_EMULATE is not set
 CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_MCPM=y
 CONFIG_VMSPLIT_2G=y
-CONFIG_HOTPLUG_CPU=y
+CONFIG_NR_CPUS=8
+CONFIG_ARM_PSCI=y
 CONFIG_AEABI=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
+CONFIG_CMDLINE="console=ttyAMA0"
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@@ -44,37 +49,46 @@
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MISC_DEVICES=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_UBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_VIRTIO_BLK=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_VIRTIO_NET=y
+CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SENSORS_VEXPRESS=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -103,38 +117,45 @@
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 454d642..7fc4278 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -106,8 +106,4 @@
 extern void dc21285_preinit(void);
 extern void dc21285_postinit(void);
 
-extern struct pci_ops via82c505_ops;
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
 #endif /* __ASM_MACH_PCI_H */
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
deleted file mode 100644
index 2389b71..0000000
--- a/arch/arm/include/asm/sched_clock.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* You shouldn't include this file. Use linux/sched_clock.h instead.
- * Temporary file until all asm/sched_clock.h users are gone
- */
-#include <linux/sched_clock.h>
diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S
new file mode 100644
index 0000000..ba12cc4
--- /dev/null
+++ b/arch/arm/include/debug/vf.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =0x40028000	@ physical
+	ldr	\rv, =0xfe028000	@ virtual
+	.endm
+
+	.macro	senduart, rd, rx
+	strb	\rd, [\rx, #0x7]	@ Data Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:	ldrb	\rd, [\rx, #0x4]	@ Status Register 1
+	tst	\rd, #1 << 6		@ TC
+	beq	1001b			@ wait until transmit done
+	.endm
+
+	.macro	waituart,rd,rx
+	.endm
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
index 70ded3f..570a48c 100644
--- a/arch/arm/kernel/psci_smp.c
+++ b/arch/arm/kernel/psci_smp.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/irqchip/arm-gic.h>
 #include <linux/smp.h>
 #include <linux/of.h>
 
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 98aee32..829a96d 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -11,25 +11,26 @@
  *  This file contains the ARM-specific time handling details:
  *  reading the RTC at bootup, etc...
  */
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/profile.h>
-#include <linux/timer.h>
+#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/profile.h>
+#include <linux/sched.h>
 #include <linux/sched_clock.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/timer.h>
 
-#include <asm/thread_info.h>
-#include <asm/stacktrace.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/stacktrace.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
     defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
@@ -116,8 +117,12 @@
 
 void __init time_init(void)
 {
-	if (machine_desc->init_time)
+	if (machine_desc->init_time) {
 		machine_desc->init_time();
-	else
+	} else {
+#ifdef CONFIG_COMMON_CLK
+		of_clk_init(NULL);
+#endif
 		clocksource_of_init();
+	}
 }
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index bd454b0..47d7338 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,6 @@
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
diff --git a/arch/arm/lib/io-shark.c b/arch/arm/lib/io-shark.c
deleted file mode 100644
index 8242539..0000000
--- a/arch/arm/lib/io-shark.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-shark.c
- *
- *  by Alexander Schulz
- *
- * derived from:
- * linux/arch/arm/lib/io-ebsa.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index c7d670d..2d895a2 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -169,6 +169,7 @@
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index ade948b..112e867 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -112,7 +112,7 @@
 /*
  * MACB Ethernet device
  */
-static struct __initdata macb_platform_data cam60_macb_data = {
+static struct macb_platform_data cam60_macb_data __initdata = {
 	.phy_irq_pin	= AT91_PIN_PB5,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
index 3fcb662..3a185fa 100644
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -14,7 +14,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -36,11 +35,6 @@
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91rm9200_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91rm9200_dt_board_compat[] __initdata = {
 	"atmel,at91rm9200",
 	NULL
@@ -52,6 +46,5 @@
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
 	.init_irq	= at91rm9200_dt_init_irq,
-	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 8db3013..3dab868 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -13,7 +13,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -37,11 +36,6 @@
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9",
 	NULL
@@ -54,6 +48,5 @@
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
 	.init_irq	= at91_dt_init_irq,
-	.init_machine	= at91_dt_device_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
index 048a57f..c287307 100644
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -60,14 +60,48 @@
 #define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
 #define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
 #define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+#define		AT91_ADC_IER_PEN	(1 << 29)
+#define		AT91_ADC_IER_NOPEN	(1 << 30)
+#define		AT91_ADC_IER_XRDY	(1 << 20)
+#define		AT91_ADC_IER_YRDY	(1 << 21)
+#define		AT91_ADC_IER_PRDY	(1 << 22)
+#define		AT91_ADC_ISR_PENS	(1 << 31)
 
 #define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
 #define		AT91_ADC_DATA		(0x3ff)
 
 #define AT91_ADC_CDR0_9X5	(0x50)			/* Channel Data Register 0 for 9X5 */
 
+#define AT91_ADC_ACR		0x94	/* Analog Control Register */
+#define		AT91_ADC_ACR_PENDETSENS	(0x3 << 0)	/* pull-up resistor */
+
+#define AT91_ADC_TSMR		0xB0
+#define		AT91_ADC_TSMR_TSMODE	(3 << 0)	/* Touch Screen Mode */
+#define			AT91_ADC_TSMR_TSMODE_NONE		(0 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS	(1 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_PRESS	(2 << 0)
+#define			AT91_ADC_TSMR_TSMODE_5WIRE		(3 << 0)
+#define		AT91_ADC_TSMR_TSAV	(3 << 4)	/* Averages samples */
+#define			AT91_ADC_TSMR_TSAV_(x)		((x) << 4)
+#define		AT91_ADC_TSMR_SCTIM	(0x0f << 16)	/* Switch closure time */
+#define		AT91_ADC_TSMR_PENDBC	(0x0f << 28)	/* Pen Debounce time */
+#define			AT91_ADC_TSMR_PENDBC_(x)	((x) << 28)
+#define		AT91_ADC_TSMR_NOTSDMA	(1 << 22)	/* No Touchscreen DMA */
+#define		AT91_ADC_TSMR_PENDET_DIS	(0 << 24)	/* Pen contact detection disable */
+#define		AT91_ADC_TSMR_PENDET_ENA	(1 << 24)	/* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR	0xB4
+#define AT91_ADC_TSYPOSR	0xB8
+#define AT91_ADC_TSPRESSR	0xBC
+
 #define AT91_ADC_TRGR_9260	AT91_ADC_MR
 #define AT91_ADC_TRGR_9G45	0x08
 #define AT91_ADC_TRGR_9X5	0xC0
 
+/* Trigger Register bit field */
+#define		AT91_ADC_TRGR_TRGPER	(0xffff << 16)
+#define			AT91_ADC_TRGR_TRGPER_(x)	((x) << 16)
+#define		AT91_ADC_TRGR_TRGMOD	(0x7 << 0)
+#define			AT91_ADC_TRGR_MOD_PERIOD_TRIG	(5 << 0)
+
 #endif
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 69d67f7..9fe6d88 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,5 +1,16 @@
 config ARCH_BCM
-	bool "Broadcom SoC" if ARCH_MULTI_V7
+	bool "Broadcom SoC Support"
+	depends on ARCH_MULTIPLATFORM
+	help
+	  This enables support for Broadcom ARM based SoC
+          chips
+
+if ARCH_BCM
+
+menu "Broadcom SoC Selection"
+
+config ARCH_BCM_MOBILE
+	bool "Broadcom Mobile SoC" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322
@@ -9,12 +20,17 @@
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_TIME
-	select GPIO_BCM
+	select GPIO_BCM_KONA
 	select SPARSE_IRQ
 	select TICK_ONESHOT
 	select CACHE_L2X0
+	select HAVE_ARM_ARCH_TIMER
 	help
-	  This enables support for system based on Broadcom SoCs.
+	  This enables support for systems based on Broadcom mobile SoCs.
 	  It currently supports the 'BCM281XX' family, which includes
 	  BCM11130, BCM11140, BCM11351, BCM28145 and
 	  BCM28155 variants.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index e3d0303..c2ccd5a 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -10,6 +10,6 @@
 # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-obj-$(CONFIG_ARCH_BCM)		:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
+obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 8d9f931..cb3dc36 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -67,8 +67,7 @@
 
 static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
 
-DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
-	.init_time = clocksource_of_init,
+DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
 	.init_machine = board_init,
 	.restart = bcm_kona_restart,
 	.dt_compat = bcm11351_dt_compat,
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index 40686d7..70f2f39 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -14,11 +14,10 @@
 
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/irqchip/bcm2835.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/clk/bcm2835.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -131,10 +130,8 @@
 
 DT_MACHINE_START(BCM2835, "BCM2835")
 	.map_io = bcm2835_map_io,
-	.init_irq = bcm2835_init_irq,
-	.handle_irq = bcm2835_handle_irq,
+	.init_irq = irqchip_init,
 	.init_machine = bcm2835_init,
-	.init_time = clocksource_of_init,
 	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 4ca2f3c..134641d 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -29,12 +29,12 @@
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 #include <linux/clk-provider.h>
+#include <linux/sched_clock.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/sched_clock.h>
 #include <asm/system_misc.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index c4bdc0a..40f15f1 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -22,17 +22,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*
@@ -74,7 +76,7 @@
 	if (handler != NULL) {
 		da830_evm_usb_ocic_handler = handler;
 
-		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+		error = request_irq(irq, da830_evm_usb_ocic_irq,
 				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				    "OHCI over-current indicator", NULL);
 		if (error)
@@ -591,6 +593,10 @@
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da830_register_gpio();
+	if (ret)
+		pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
+
 	ret = da830_register_edma(da830_edma_rsv);
 	if (ret)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index dd1fb24..df16cb8 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
@@ -38,6 +39,7 @@
 #include <linux/spi/flash.h>
 #include <linux/wl12xx.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -1437,6 +1439,10 @@
 {
 	int ret;
 
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	ret = pmic_tps65070_init();
 	if (ret)
 		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 42b23a3..ecdc7d4 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -22,15 +22,17 @@
 #include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
+#include <mach/common.h>
 
 #include "davinci.h"
 
@@ -375,6 +377,11 @@
 static __init void dm355_evm_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(1, "dm9000");
 	gpio_direction_input(1);
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 65a984c..43bacbf 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -19,15 +19,16 @@
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
+#include <mach/common.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -234,6 +235,11 @@
 static __init void dm355_leopard_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(9, "dm9000");
 	gpio_direction_input(9);
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 4078ba9..f4a6c18 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -743,6 +743,12 @@
 
 static __init void dm365_evm_init(void)
 {
+	int ret;
+
+	ret = dm365_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
 	davinci_serial_init(dm365_serial_device);
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 40bb9b5..9cc32c2 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -754,9 +754,14 @@
 
 static __init void davinci_evm_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 2bc3651..44b2019 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -33,17 +33,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
 #include <linux/export.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/serial.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -786,8 +788,13 @@
 
 static __init void evm_init(void)
 {
+	int ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm646x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
 	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 46f336f..bb680af 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -26,17 +26,18 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -169,9 +170,14 @@
 
 static __init void davinci_ntosd2_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index ab98c75..2aac51d 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -13,10 +13,12 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -211,7 +213,7 @@
 		hawk_usb_ocic_handler = handler;
 
 		error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
-					IRQF_DISABLED | IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_RISING |
 					IRQF_TRIGGER_FALLING,
 					"OHCI over-current indicator", NULL);
 		if (error)
@@ -290,6 +292,10 @@
 {
 	int ret;
 
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	davinci_serial_init(da8xx_serial_device);
 
 	omapl138_hawk_config_emac();
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index d6c746e..0813b51 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -20,7 +21,6 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -1151,6 +1151,16 @@
 	},
 };
 
+static struct davinci_gpio_platform_data da830_gpio_platform_data = {
+	.ngpio = 128,
+	.intc_irq_num = DA830_N_CP_INTC_IRQ,
+};
+
+int __init da830_register_gpio(void)
+{
+	return da8xx_register_gpio(&da830_gpio_platform_data);
+}
+
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
 		.base		= DA8XX_TIMER64P0_BASE,
@@ -1196,10 +1206,6 @@
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 128,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.emac_pdata		= &da8xx_emac_pdata,
 };
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index f56e5fb..352984e 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/regulator/consumer.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -28,7 +29,6 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -1281,6 +1281,16 @@
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
+static struct davinci_gpio_platform_data da850_gpio_platform_data = {
+	.ngpio = 144,
+	.intc_irq_num = DA850_N_CP_INTC_IRQ,
+};
+
+int __init da850_register_gpio(void)
+{
+	return da8xx_register_gpio(&da850_gpio_platform_data);
+}
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -1298,10 +1308,6 @@
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 144,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 2ab5d57..2eebc43 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -53,6 +53,9 @@
 #define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
 void davinci_map_sysmod(void);
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+int davinci_gpio_register(struct resource *res, int size, void *pdata);
+
 /* DM355 base addresses */
 #define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
 #define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -82,6 +85,7 @@
 		const struct spi_board_info *info, unsigned len);
 void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm355_gpio_register(void);
 
 /* DM365 function declarations */
 void dm365_init(void);
@@ -92,11 +96,13 @@
 void dm365_init_spi0(unsigned chipselect_mask,
 			const struct spi_board_info *info, unsigned len);
 int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm365_gpio_register(void);
 
 /* DM644x function declarations */
 void dm644x_init(void);
 void dm644x_init_asp(struct snd_platform_data *pdata);
 int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm644x_gpio_register(void);
 
 /* DM646x function declarations */
 void dm646x_init(void);
@@ -106,6 +112,7 @@
 void dm646x_video_init(void);
 void dm646x_setup_vpif(struct vpif_display_config *,
 		       struct vpif_capture_config *);
+int dm646x_gpio_register(void);
 
 extern struct platform_device dm365_serial_device[];
 extern struct platform_device dm355_serial_device[];
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2e473fe..c46eccb 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -665,6 +665,32 @@
 	return platform_device_register(&da8xx_lcdc_device);
 }
 
+static struct resource da8xx_gpio_resources[] = {
+	{ /* registers */
+		.start	= DA8XX_GPIO_BASE,
+		.end	= DA8XX_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{ /* interrupt */
+		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO8,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_gpio_device = {
+	.name		= "davinci_gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_gpio_resources),
+	.resource	= da8xx_gpio_resources,
+};
+
+int __init da8xx_register_gpio(void *pdata)
+{
+	da8xx_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_gpio_device);
+}
+
 static struct resource da8xx_mmcsd0_resources[] = {
 	{		/* registers */
 		.start	= DA8XX_MMCSD0_BASE,
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 111573c0..3996e98 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -318,6 +318,19 @@
 	platform_device_register(&davinci_wdt_device);
 }
 
+static struct platform_device davinci_gpio_device = {
+	.name	= "davinci_gpio",
+	.id	= -1,
+};
+
+int davinci_gpio_register(struct resource *res, int size, void *pdata)
+{
+	davinci_gpio_device.resource = res;
+	davinci_gpio_device.num_resources = size;
+	davinci_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&davinci_gpio_device);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 3eaa5f6..ef9ff1f 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,8 +13,10 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-
 #include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -25,9 +27,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
-#include <linux/platform_data/edma.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -886,6 +885,30 @@
 	},
 };
 
+static struct resource dm355_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm355_gpio_register(void)
+{
+	return davinci_gpio_register(dm355_gpio_resources,
+				     sizeof(dm355_gpio_resources),
+				     &dm355_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -1005,10 +1028,6 @@
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM355_GPIOBNK0,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
 };
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c29e324..1511a06 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -19,6 +19,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -29,9 +32,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -698,6 +698,32 @@
 	platform_device_register(&dm365_spi0_device);
 }
 
+static struct resource dm365_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+	.gpio_unbanked	= 8,
+};
+
+int __init dm365_gpio_register(void)
+{
+	return davinci_gpio_register(dm365_gpio_resources,
+				     sizeof(dm365_gpio_resources),
+				     &dm365_gpio_platform_data);
+}
+
 static struct emac_platform_data dm365_emac_pdata = {
 	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
@@ -1105,11 +1131,6 @@
 	.intc_irq_prios		= dm365_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm365_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM365_GPIO0,
-	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4f74682..143a321 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -13,6 +13,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -23,7 +24,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -771,6 +771,30 @@
 	},
 };
 
+static struct resource dm644_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.ngpio		= 71,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm644x_gpio_register(void)
+{
+	return davinci_gpio_register(dm644_gpio_resources,
+				     sizeof(dm644_gpio_resources),
+				     &dm644_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -897,10 +921,6 @@
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 71,
-	.gpio_irq		= IRQ_GPIOBNK0,
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 68f8d1f..2a73f29 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -24,7 +25,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -748,6 +748,30 @@
 	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
 };
 
+static struct resource dm646x_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.ngpio		= 43,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm646x_gpio_register(void)
+{
+	return davinci_gpio_register(dm646x_gpio_resources,
+				     sizeof(dm646x_gpio_resources),
+				     &dm646x_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -874,10 +898,6 @@
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 43, /* Only 33 usable */
-	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index aae5307..39e58b4 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -97,6 +97,7 @@
 int da850_register_mmcsd1(struct davinci_mmc_config *config);
 void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
 int da8xx_register_rtc(void);
+int da8xx_register_gpio(void *pdata);
 int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem *da8xx_get_mem_ctlr(void);
@@ -110,6 +111,8 @@
 void da8xx_restart(enum reboot_mode mode, const char *cmd);
 void da8xx_rproc_reserve_cma(void);
 int da8xx_register_rproc(void);
+int da850_register_gpio(void);
+int da830_register_gpio(void);
 
 extern struct platform_device da8xx_serial_device[];
 extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
deleted file mode 100644
index 1fdd1fd..0000000
--- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_DAVINCI_GPIO_H
-#define	__DAVINCI_DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
deleted file mode 100644
index 960e9de..0000000
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The inline versions use the static inlines in the driver header */
-#include "gpio-davinci.h"
-
-/*
- * The get/set/clear functions will inline when called with constant
- * parameters referencing built-in GPIOs, for low-overhead bitbanging.
- *
- * gpio_set_value() will inline only on traditional Davinci style controllers
- * with distinct set/clear registers.
- *
- * Otherwise, calls with variable parameters or referencing external
- * GPIOs (e.g. on GPIO expander chips) use outlined functions.
- */
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
-		struct davinci_gpio_controller *ctlr;
-		u32				mask;
-
-		ctlr = __gpio_to_controller(gpio);
-
-		if (ctlr->set_data != ctlr->clr_data) {
-			mask = __gpio_mask(gpio);
-			if (value)
-				__raw_writel(mask, ctlr->set_data);
-			else
-				__raw_writel(mask, ctlr->clr_data);
-			return;
-		}
-	}
-
-	__gpio_set_value(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs, at least for built-in GPIOs.
- *
- * NOTE: for built-in GPIOs, changes in reported values are synchronized
- * to the GPIO clock.  This is easily seen after calling gpio_set_value()
- * and then immediately gpio_get_value(), where the gpio_get_value() will
- * return the old value until the GPIO clock ticks and the new value gets
- * latched.
- */
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlr;
-
-	if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
-		return __gpio_get_value(gpio);
-
-	ctlr = __gpio_to_controller(gpio);
-	return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	/* don't support the reverse mapping */
-	return -ENOSYS;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 7a55b5c..56c6eb5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -181,7 +181,7 @@
 		.name      = "clockevent",
 		.opts      = TIMER_OPTS_DISABLED,
 		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
+			.flags   = IRQF_TIMER,
 			.handler = timer_interrupt,
 		}
 	},
@@ -190,7 +190,7 @@
 		.period     = ~0,
 		.opts       = TIMER_OPTS_PERIODIC,
 		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
+			.flags   = IRQF_TIMER,
 			.handler = freerun_interrupt,
 		}
 	},
@@ -331,7 +331,6 @@
 
 static struct clock_event_device clockevent_davinci = {
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_next_event	= davinci_set_next_event,
 	.set_mode	= davinci_set_mode,
 };
@@ -397,14 +396,10 @@
 
 	/* setup clockevent */
 	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
-	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
-					 clockevent_davinci.shift);
-	clockevent_davinci.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
 	clockevent_davinci.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_davinci);
+	clockevents_config_and_register(&clockevent_davinci,
+					davinci_clock_tick_rate, 1, 0xfffffffe);
 
 	for (i=0; i< ARRAY_SIZE(timers); i++)
 		timer32_config(&timers[i]);
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index 49f72a8..49fa9ab 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -10,54 +10,15 @@
 
 #include <linux/init.h>
 #include <linux/clk-provider.h>
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/platform_data/usb-ehci-orion.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
 #include <mach/dove.h>
 #include <mach/pm.h>
 #include <plat/common.h>
-#include <plat/irq.h>
 #include "common.h"
 
-/*
- * There are still devices that doesn't even know about DT,
- * get clock gates here and add a clock lookup.
- */
-static void __init dove_legacy_clk_init(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-					 "marvell,dove-gating-clock");
-	struct of_phandle_args clkspec;
-
-	clkspec.np = np;
-	clkspec.args_count = 1;
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-}
-
-static void __init dove_dt_time_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
-static void __init dove_dt_init_early(void)
-{
-	mvebu_mbus_init("marvell,dove-mbus",
-			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
-			DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
-}
-
 static void __init dove_dt_init(void)
 {
 	pr_info("Dove 88AP510 SoC\n");
@@ -65,14 +26,7 @@
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	dove_setup_cpu_wins();
-
-	/* Setup clocks for legacy devices */
-	dove_legacy_clk_init();
-
-	/* Internal devices not ported to DT yet */
-	dove_pcie_init(1, 1);
-
+	BUG_ON(mvebu_mbus_dt_init());
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -83,8 +37,6 @@
 
 DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
-	.init_early	= dove_dt_init_early,
-	.init_time	= dove_dt_time_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c95dbce..39ef3b6 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -212,7 +212,7 @@
 	INIT_CK(NULL,			"hclk",		&clk_h),
 	INIT_CK(NULL,			"apb_pclk",	&clk_p),
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
-	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ohci-platform",	NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 3f12b88..d95ee28a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,6 +36,7 @@
 #include <linux/export.h>
 #include <linux/irqchip/arm-vic.h>
 #include <linux/reboot.h>
+#include <linux/usb/ohci_pdriver.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
@@ -297,25 +298,53 @@
 	.resource	= ep93xx_rtc_resource,
 };
 
+/*************************************************************************
+ * EP93xx OHCI USB Host
+ *************************************************************************/
+
+static struct clk *ep93xx_ohci_host_clock;
+
+static int ep93xx_ohci_power_on(struct platform_device *pdev)
+{
+	if (!ep93xx_ohci_host_clock) {
+		ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(ep93xx_ohci_host_clock))
+			return PTR_ERR(ep93xx_ohci_host_clock);
+	}
+
+	return clk_enable(ep93xx_ohci_host_clock);
+}
+
+static void ep93xx_ohci_power_off(struct platform_device *pdev)
+{
+	clk_disable(ep93xx_ohci_host_clock);
+}
+
+static struct usb_ohci_pdata ep93xx_ohci_pdata = {
+	.power_on	= ep93xx_ohci_power_on,
+	.power_off	= ep93xx_ohci_power_off,
+	.power_suspend	= ep93xx_ohci_power_off,
+};
 
 static struct resource ep93xx_ohci_resources[] = {
 	DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
 	DEFINE_RES_IRQ(IRQ_EP93XX_USB),
 };
 
+static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device ep93xx_ohci_device = {
-	.name		= "ep93xx-ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
-	.dev		= {
-		.dma_mask		= &ep93xx_ohci_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
 	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
 	.resource	= ep93xx_ohci_resources,
+	.dev		= {
+		.dma_mask		= &ep93xx_ohci_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &ep93xx_ohci_pdata,
+	},
 };
 
-
 /*************************************************************************
  * EP93xx physmap'ed flash
  *************************************************************************/
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 56fe819..f9d67a0 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -14,19 +14,28 @@
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
 	default y
+	select ARM_AMBA
+	select CLKSRC_OF
+	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
+	select CPU_EXYNOS4210
 	select GIC_NON_BANKED
+	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
+	select S5P_DEV_MFC
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
 config ARCH_EXYNOS5
 	bool "SAMSUNG EXYNOS5"
+	select ARM_AMBA
+	select CLKSRC_OF
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select PINCTRL
+	select USB_ARCH_HAS_XHCI
 	help
 	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
 
@@ -110,35 +119,6 @@
 	help
 	  Enable EXYNOS5440 SoC support
 
-comment "Flattened Device Tree based board for EXYNOS SoCs"
-
-config MACH_EXYNOS4_DT
-	bool "Samsung Exynos4 Machine using device tree"
-	default y
-	depends on ARCH_EXYNOS4
-	select ARM_AMBA
-	select CLKSRC_OF
-	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
-	select CPU_EXYNOS4210
-	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
-	select S5P_DEV_MFC
-	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the Exynos4 SoC based board.
-	  Note: This is under development and not all peripherals can be supported
-	  with this machine file.
-
-config MACH_EXYNOS5_DT
-	bool "SAMSUNG EXYNOS5 Machine using device tree"
-	default y
-	depends on ARCH_EXYNOS5
-	select ARM_AMBA
-	select CLKSRC_OF
-	select USB_ARCH_HAS_XHCI
-	help
-	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
-	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 5369615..8930b66 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -32,5 +32,5 @@
 
 # machine support
 
-obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
-obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= mach-exynos4-dt.o
+obj-$(CONFIG_ARCH_EXYNOS5)	+= mach-exynos5-dt.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index ba95e5d..a4e7ba8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -26,8 +26,6 @@
 #include <linux/export.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/irqchip/chained_irq.h>
 
@@ -367,12 +365,6 @@
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
-void __init exynos_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 struct bus_type exynos_subsys = {
 	.name		= "exynos-core",
 	.dev_name	= "exynos-core",
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 8646a14..f0fa205 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -16,7 +16,6 @@
 #include <linux/of.h>
 
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-void exynos_init_time(void);
 
 struct map_desc;
 void exynos_init_io(void);
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 57344b7..2cdb63e 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -44,11 +44,6 @@
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 0099c6c..4b8f6e2 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -11,12 +11,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/serial_core.h>
-#include <linux/memblock.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <plat/mfc.h>
@@ -54,7 +50,6 @@
 	.init_early	= exynos_firmware_init,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 	.reserve	= exynos4_reserve,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index f874b77..7976ab3 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,14 +11,10 @@
 
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/memblock.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/regs-pmu.h>
-
-#include <plat/cpu.h>
 #include <plat/mfc.h>
 
 #include "common.h"
@@ -76,7 +72,6 @@
 	.map_io		= exynos_init_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
index 21dc5a8..0a63c4d2 100644
--- a/arch/arm/mach-gemini/time.c
+++ b/arch/arm/mach-gemini/time.c
@@ -13,6 +13,8 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 #include <asm/mach/time.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
 
 /*
  * Register definitions for the timers
@@ -33,19 +35,89 @@
 #define TIMER_3_CR_CLOCK		(1 << 7)
 #define TIMER_3_CR_INT			(1 << 8)
 
+static unsigned int tick_rate;
+
+static int gemini_timer_set_next_event(unsigned long cycles,
+				       struct clock_event_device *evt)
+{
+	u32 cr;
+
+	cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* This may be overdoing it, feel free to test without this */
+	cr &= ~TIMER_2_CR_ENABLE;
+	cr &= ~TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* Set next event */
+	writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	cr |= TIMER_2_CR_ENABLE;
+	cr |= TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	return 0;
+}
+
+static void gemini_timer_set_mode(enum clock_event_mode mode,
+				  struct clock_event_device *evt)
+{
+	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
+	u32 cr;
+
+	switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+		/* Start the timer */
+		writel(period,
+		       TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+		writel(period,
+		       TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		cr |= TIMER_2_CR_ENABLE;
+		cr |= TIMER_2_CR_INT;
+		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		/*
+		 * Disable also for oneshot: the set_next() call will
+		 * arm the timer instead.
+		 */
+		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		cr &= ~TIMER_2_CR_ENABLE;
+		cr &= ~TIMER_2_CR_INT;
+		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		break;
+	default:
+                break;
+	}
+}
+
+/* Use TIMER2 as clock event */
+static struct clock_event_device gemini_clockevent = {
+	.name		= "TIMER2",
+	.rating		= 300, /* Reasonably fast and accurate clock event */
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= gemini_timer_set_next_event,
+	.set_mode	= gemini_timer_set_mode,
+};
+
 /*
  * IRQ handler for the timer
  */
 static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &gemini_clockevent;
 
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
 static struct irqaction gemini_timer_irq = {
 	.name		= "Gemini Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= gemini_timer_interrupt,
 };
 
@@ -54,9 +126,9 @@
  */
 void __init gemini_timer_init(void)
 {
-	unsigned int tick_rate, reg_v;
+	u32 reg_v;
 
-	reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
+	reg_v = readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
 	tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
 
 	printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
@@ -82,8 +154,17 @@
 	 * Make irqs happen for the system timer
 	 */
 	setup_irq(IRQ_TIMER2, &gemini_timer_irq);
-	/* Start the timer */
-	__raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* Enable and use TIMER1 as clock source */
+	writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)));
+	writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE)));
+	writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)),
+				  "TIMER1", tick_rate, 300, 32,
+				  clocksource_mmio_readl_up))
+		pr_err("timer: failed to initialize gemini clock source\n");
+
+	/* Configure and register the clockevent */
+	clockevents_config_and_register(&gemini_clockevent, tick_rate,
+					1, 0xffffffff);
 }
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 8e8437d..fe98df4 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -10,9 +10,9 @@
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_798181
 	select ARM_GIC
+	select ARM_PSCI
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 8a1ef57..55840f4 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -3,6 +3,4 @@
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
 
-obj-$(CONFIG_SMP)			+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 obj-$(CONFIG_PM_SLEEP)			+= pm.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index aea1ec5..7ec5edc 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -3,7 +3,6 @@
 
 #include <linux/reboot.h>
 
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
 extern void highbank_restart(enum reboot_mode, const char *);
 extern void __iomem *scu_base_addr;
 
@@ -14,8 +13,5 @@
 #endif
 
 extern void highbank_smc1(int fn, int arg);
-extern void highbank_cpu_die(unsigned int cpu);
-
-extern struct smp_operations highbank_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8e63ccd..b3d7e56 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -24,11 +24,9 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/amba/bus.h>
-#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
 
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
+#include <asm/psci.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -49,17 +47,6 @@
 	scu_base_addr = ioremap(base, SZ_4K);
 }
 
-#define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
-#define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
-
-void highbank_set_cpu_jump(int cpu, void *jump_addr)
-{
-	cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
-	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
-	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
-	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
-			  HB_JUMP_TABLE_PHYS(cpu) + 15);
-}
 
 static void highbank_l2x0_disable(void)
 {
@@ -83,20 +70,6 @@
 	}
 }
 
-static void __init highbank_timer_init(void)
-{
-	struct device_node *np;
-
-	/* Map system registers */
-	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
-	sregs_base = of_iomap(np, 0);
-	WARN_ON(!sregs_base);
-
-	of_clk_init(NULL);
-
-	clocksource_of_init();
-}
-
 static void highbank_power_off(void)
 {
 	highbank_set_pwr_shutdown();
@@ -153,8 +126,19 @@
 	.notifier_call = highbank_platform_notifier,
 };
 
+static struct platform_device highbank_cpuidle_device = {
+	.name = "cpuidle-calxeda",
+};
+
 static void __init highbank_init(void)
 {
+	struct device_node *np;
+
+	/* Map system registers */
+	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+	sregs_base = of_iomap(np, 0);
+	WARN_ON(!sregs_base);
+
 	pm_power_off = highbank_power_off;
 	highbank_pm_init();
 
@@ -162,6 +146,9 @@
 	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	if (psci_ops.cpu_suspend)
+		platform_device_register(&highbank_cpuidle_device);
 }
 
 static const char *highbank_match[] __initconst = {
@@ -174,9 +161,7 @@
 #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
 	.dma_zone_size	= (4ULL * SZ_1G),
 #endif
-	.smp		= smp_ops(highbank_smp_ops),
 	.init_irq	= highbank_init_irq,
-	.init_time	= highbank_timer_init,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
 	.restart	= highbank_restart,
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
deleted file mode 100644
index a019e4e..0000000
--- a/arch/arm/mach-highbank/hotplug.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/kernel.h>
-#include <asm/cacheflush.h>
-
-#include "core.h"
-#include "sysregs.h"
-
-extern void secondary_startup(void);
-
-/*
- * platform-specific code to shutdown a CPU
- *
- */
-void __ref highbank_cpu_die(unsigned int cpu)
-{
-	highbank_set_cpu_jump(cpu, phys_to_virt(0));
-
-	flush_cache_louis();
-	highbank_set_core_pwr();
-
-	while (1)
-		cpu_do_idle();
-}
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
deleted file mode 100644
index 32d75cf5..0000000
--- a/arch/arm/mach-highbank/platsmp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/smp_scu.h>
-
-#include "core.h"
-
-extern void secondary_startup(void);
-
-static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	highbank_set_cpu_jump(cpu, secondary_startup);
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-	return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init highbank_smp_init_cpus(void)
-{
-	unsigned int i, ncores = 4;
-
-	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "highbank: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
-{
-	if (scu_base_addr)
-		scu_enable(scu_base_addr);
-}
-
-struct smp_operations highbank_smp_ops __initdata = {
-	.smp_init_cpus		= highbank_smp_init_cpus,
-	.smp_prepare_cpus	= highbank_smp_prepare_cpus,
-	.smp_boot_secondary	= highbank_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= highbank_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 04eddb4..7f2bd85 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -16,27 +16,19 @@
 
 #include <linux/cpu_pm.h>
 #include <linux/init.h>
-#include <linux/io.h>
 #include <linux/suspend.h>
 
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
 #include <asm/suspend.h>
-
-#include "core.h"
-#include "sysregs.h"
+#include <asm/psci.h>
 
 static int highbank_suspend_finish(unsigned long val)
 {
-	outer_flush_all();
-	outer_disable();
+	const struct psci_power_state ps = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+		.affinity_level = 1,
+	};
 
-	highbank_set_pwr_suspend();
-
-	cpu_do_idle();
-
-	highbank_clear_pwr_request();
-	return 0;
+	return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
 }
 
 static int highbank_pm_enter(suspend_state_t state)
@@ -44,15 +36,11 @@
 	cpu_pm_enter();
 	cpu_cluster_pm_enter();
 
-	highbank_set_cpu_jump(0, cpu_resume);
 	cpu_suspend(0, highbank_suspend_finish);
 
 	cpu_cluster_pm_exit();
 	cpu_pm_exit();
 
-	highbank_smc1(0x102, 0x1);
-	if (scu_base_addr)
-		scu_enable(scu_base_addr);
 	return 0;
 }
 
@@ -63,5 +51,8 @@
 
 void __init highbank_pm_init(void)
 {
+	if (!psci_ops.cpu_suspend)
+		return;
+
 	suspend_set_ops(&highbank_pm_ops);
 }
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 29a8af6..7a6e6f7 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -4,13 +4,14 @@
 	select ARM_CPU_SUSPEND if PM
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
 	select MULTI_IRQ_HANDLER
+	select SOC_BUS
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -24,7 +25,7 @@
 	help
 	  Select this if you want to use prioritized IRQ handling.
 	  This feature prevents higher priority ISR to be interrupted
-	  by lower priority IRQ even IRQF_DISABLED flag is not set.
+	  by lower priority IRQ.
 	  This may be useful in embedded applications, where are strong
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
@@ -92,14 +93,12 @@
 config SOC_IMX1
 	bool
 	select ARCH_MX1
-	select COMMON_CLK
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
 config SOC_IMX21
 	bool
-	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -108,7 +107,6 @@
 	bool
 	select ARCH_MX25
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_ARM926T
 	select MXC_AVIC
 
@@ -116,7 +114,6 @@
 	bool
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
-	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MACH_MX27
@@ -124,7 +121,6 @@
 
 config SOC_IMX31
 	bool
-	select COMMON_CLK
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
@@ -133,7 +129,6 @@
 config SOC_IMX35
 	bool
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_V6K
 	select HAVE_EPIT
 	select MXC_AVIC
@@ -144,7 +139,6 @@
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_V7
 	select MXC_TZIC
 
@@ -791,7 +785,6 @@
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select COMMON_CLK
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
@@ -801,6 +794,8 @@
 	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
 	select PINCTRL
 	select PINCTRL_IMX6Q
 	select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 5383c58..bbe1f5b 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -102,6 +102,8 @@
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
+# i.MX6SL reuses pm-imx6q.c
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index ad3b755..4a40bbb4 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -16,6 +16,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include "common.h"
+#include "hardware.h"
 
 #define REG_SET		0x4
 #define REG_CLR		0x8
@@ -26,6 +27,7 @@
 #define ANADIG_USB1_CHRG_DETECT	0x1b0
 #define ANADIG_USB2_CHRG_DETECT	0x210
 #define ANADIG_DIGPROG		0x260
+#define ANADIG_DIGPROG_IMX6SL	0x280
 
 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
 #define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
@@ -76,21 +78,38 @@
 		BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
 }
 
-u32 imx_anatop_get_digprog(void)
+void __init imx_init_revision_from_anatop(void)
 {
 	struct device_node *np;
 	void __iomem *anatop_base;
-	static u32 digprog;
-
-	if (digprog)
-		return digprog;
+	unsigned int revision;
+	u32 digprog;
+	u16 offset = ANADIG_DIGPROG;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	anatop_base = of_iomap(np, 0);
 	WARN_ON(!anatop_base);
-	digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+	if (of_device_is_compatible(np, "fsl,imx6sl-anatop"))
+		offset = ANADIG_DIGPROG_IMX6SL;
+	digprog = readl_relaxed(anatop_base + offset);
+	iounmap(anatop_base);
 
-	return digprog;
+	switch (digprog & 0xff) {
+	case 0:
+		revision = IMX_CHIP_REVISION_1_0;
+		break;
+	case 1:
+		revision = IMX_CHIP_REVISION_1_1;
+		break;
+	case 2:
+		revision = IMX_CHIP_REVISION_1_2;
+		break;
+	default:
+		revision = IMX_CHIP_REVISION_UNKNOWN;
+	}
+
+	mxc_set_cpu_type(digprog >> 16 & 0xff);
+	imx_set_soc_revision(revision);
 }
 
 void __init imx_anatop_init(void)
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 7c0dc45..ce37af2 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -11,8 +11,12 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include "crm-regs-imx5.h"
 #include "clk.h"
@@ -131,8 +135,6 @@
 {
 	int i;
 
-	of_clk_init(NULL);
-
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil);
 	clk[osc] = imx_obtain_fixed_clock("osc", rate_osc);
@@ -465,12 +467,17 @@
 	return 0;
 }
 
-int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
-			unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init_dt(struct device_node *np)
 {
-	int i;
+	mx51_clocks_init(0, 0, 0, 0);
+}
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+
+static void __init mx53_clocks_init(struct device_node *np)
+{
+	int i, irq;
 	unsigned long r;
-	struct device_node *np;
+	void __iomem *base;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
 	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -529,12 +536,11 @@
 			pr_err("i.MX53 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+	mx5_clocks_common_init(0, 0, 0, 0);
 
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
 	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
@@ -557,9 +563,6 @@
 	clk_set_rate(clk[esdhc_a_podf], 200000000);
 	clk_set_rate(clk[esdhc_b_podf], 200000000);
 
-	/* System timer */
-	mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
-
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable_unprepare(clk[iim_gate]);
@@ -567,15 +570,10 @@
 	r = clk_round_rate(clk[usboh3_per_gate], 54000000);
 	clk_set_rate(clk[usboh3_per_gate], r);
 
-	return 0;
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(base, irq);
 }
-
-int __init mx51_clocks_init_dt(void)
-{
-	return mx51_clocks_init(0, 0, 0, 0);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
-	return mx53_clocks_init(0, 0, 0, 0);
-}
+CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 9181a24..d756d91 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
@@ -25,155 +24,6 @@
 #include "common.h"
 #include "hardware.h"
 
-#define CCR				0x0
-#define BM_CCR_WB_COUNT			(0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
-#define BM_CCR_RBC_EN			(0x1 << 27)
-
-#define CCGR0				0x68
-#define CCGR1				0x6c
-#define CCGR2				0x70
-#define CCGR3				0x74
-#define CCGR4				0x78
-#define CCGR5				0x7c
-#define CCGR6				0x80
-#define CCGR7				0x84
-
-#define CLPCR				0x54
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define CGPR				0x64
-#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
-	u32 val = readl_relaxed(ccm_base + CGPR);
-
-	val |= BM_CGPR_CHICKEN_BIT;
-	writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
-	u32 val;
-	static bool last_rbc_mode;
-
-	if (last_rbc_mode == enable)
-		return;
-	/*
-	 * need to mask all interrupts in GPC before
-	 * operating RBC configurations
-	 */
-	imx_gpc_mask_all();
-
-	/* configure RBC enable bit */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_EN;
-	val |= enable ? BM_CCR_RBC_EN : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	/* configure RBC count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_BYPASS_COUNT;
-	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
-	writel(val, ccm_base + CCR);
-
-	/*
-	 * need to delay at least 2 cycles of CKIL(32K)
-	 * due to hardware design requirement, which is
-	 * ~61us, here we use 65us for safe
-	 */
-	udelay(65);
-
-	/* restore GPC interrupt mask settings */
-	imx_gpc_restore_all();
-
-	last_rbc_mode = enable;
-}
-
-static void imx6q_enable_wb(bool enable)
-{
-	u32 val;
-	static bool last_wb_mode;
-
-	if (last_wb_mode == enable)
-		return;
-
-	/* configure well bias enable bit */
-	val = readl_relaxed(ccm_base + CLPCR);
-	val &= ~BM_CLPCR_WB_PER_AT_LPM;
-	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	/* configure well bias count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_WB_COUNT;
-	val |= enable ? BM_CCR_WB_COUNT : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	last_wb_mode = enable;
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	u32 val = readl_relaxed(ccm_base + CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		imx6q_enable_wb(false);
-		imx6q_enable_rbc(false);
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		imx6q_enable_wb(true);
-		imx6q_enable_rbc(true);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	return 0;
-}
-
 static const char *step_sels[]	= { "osc", "pll2_pfd2_396m", };
 static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
 static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
@@ -182,7 +32,7 @@
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
 static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
-static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[]	= { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
@@ -196,7 +46,7 @@
 static const char *ipu2_di1_sels[]	= { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *hsi_tx_sels[]	= { "pll3_120m", "pll2_pfd2_396m", };
 static const char *pcie_axi_sels[]	= { "axi", "ahb", };
-static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
 static const char *emi_sels[]		= { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
@@ -205,7 +55,7 @@
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
-				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
 static const char *cko2_sels[] = {
 	"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
 	"gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
@@ -217,6 +67,11 @@
 	"uart_serial", "spdif", "asrc", "hsi_tx",
 };
 static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+	"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
+	"pcie_ref", "sata_ref",
+};
 
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -251,7 +106,8 @@
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
 	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
-	spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max
+	spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
+	lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -300,7 +156,7 @@
 	WARN_ON(!base);
 
 	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
-	if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+	if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
 		post_div_table[1].div = 1;
 		post_div_table[2].div = 1;
 		video_div_table[1].div = 1;
@@ -342,6 +198,18 @@
 			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
 			&imx_ccm_lock);
 
+	clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+	clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+	/*
+	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
+	 * independently configured as clock inputs or outputs.  We treat
+	 * the "output_enable" bit as a gate, even though it's really just
+	 * enabling clock output.
+	 */
+	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
+	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+
 	/*                                name              parent_name        reg       idx */
 	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
 	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
@@ -359,13 +227,15 @@
 	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
 
 	clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
 	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
 	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
 
 	np = ccm_node;
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
-	ccm_base = base;
+
+	imx6q_pm_set_ccm_base(base);
 
 	/*                                  name                reg       shift width parent_names     num_parents */
 	clk[step]             = imx_clk_mux("step",	        base + 0xc,  8,  1, step_sels,	       ARRAY_SIZE(step_sels));
@@ -573,7 +443,8 @@
 	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
 	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
 
-	if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
+	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
+	    cpu_is_imx6dl()) {
 		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
 		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
 	}
@@ -603,8 +474,9 @@
 	if (ret)
 		pr_warn("failed to set up CLKO: %d\n", ret);
 
-	/* Set initial power mode */
-	imx6q_set_lpm(WAIT_CLOCKED);
+	/* All existing boards with PCIe use LVDS1 */
+	if (IS_ENABLED(CONFIG_PCI_IMX6))
+		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index a5c3c5d..c0c4ef5 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -127,6 +127,9 @@
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
+	/* Reuse imx6q pm code */
+	imx6q_pm_set_ccm_base(base);
+
 	/*                                              name                reg       shift width parent_names     num_parents */
 	clks[IMX6SL_CLK_STEP]             = imx_clk_mux("step",             base + 0xc,  8,  1, step_sels,         ARRAY_SIZE(step_sels));
 	clks[IMX6SL_CLK_PLL1_SW]          = imx_clk_mux("pll1_sw",          base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 4517fd7..7cbe22d 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -13,74 +13,73 @@
 
 #include <linux/reboot.h>
 
+struct irq_data;
 struct platform_device;
 struct pt_regs;
 struct clk;
 enum mxc_cpu_pwr_mode;
 
-extern void mx1_map_io(void);
-extern void mx21_map_io(void);
-extern void mx25_map_io(void);
-extern void mx27_map_io(void);
-extern void mx31_map_io(void);
-extern void mx35_map_io(void);
-extern void mx51_map_io(void);
-extern void mx53_map_io(void);
-extern void imx1_init_early(void);
-extern void imx21_init_early(void);
-extern void imx25_init_early(void);
-extern void imx27_init_early(void);
-extern void imx31_init_early(void);
-extern void imx35_init_early(void);
-extern void imx51_init_early(void);
-extern void imx53_init_early(void);
-extern void mxc_init_irq(void __iomem *);
-extern void tzic_init_irq(void __iomem *);
-extern void mx1_init_irq(void);
-extern void mx21_init_irq(void);
-extern void mx25_init_irq(void);
-extern void mx27_init_irq(void);
-extern void mx31_init_irq(void);
-extern void mx35_init_irq(void);
-extern void mx51_init_irq(void);
-extern void mx53_init_irq(void);
-extern void imx1_soc_init(void);
-extern void imx21_soc_init(void);
-extern void imx25_soc_init(void);
-extern void imx27_soc_init(void);
-extern void imx31_soc_init(void);
-extern void imx35_soc_init(void);
-extern void imx51_soc_init(void);
-extern void imx51_init_late(void);
-extern void imx53_init_late(void);
-extern void epit_timer_init(void __iomem *base, int irq);
-extern void mxc_timer_init(void __iomem *, int);
-extern int mx1_clocks_init(unsigned long fref);
-extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(void);
-extern int mx27_clocks_init(unsigned long fref);
-extern int mx31_clocks_init(unsigned long fref);
-extern int mx35_clocks_init(void);
-extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+void mx1_map_io(void);
+void mx21_map_io(void);
+void mx25_map_io(void);
+void mx27_map_io(void);
+void mx31_map_io(void);
+void mx35_map_io(void);
+void mx51_map_io(void);
+void mx53_map_io(void);
+void imx1_init_early(void);
+void imx21_init_early(void);
+void imx25_init_early(void);
+void imx27_init_early(void);
+void imx31_init_early(void);
+void imx35_init_early(void);
+void imx51_init_early(void);
+void imx53_init_early(void);
+void mxc_init_irq(void __iomem *);
+void tzic_init_irq(void __iomem *);
+void mx1_init_irq(void);
+void mx21_init_irq(void);
+void mx25_init_irq(void);
+void mx27_init_irq(void);
+void mx31_init_irq(void);
+void mx35_init_irq(void);
+void mx51_init_irq(void);
+void mx53_init_irq(void);
+void imx1_soc_init(void);
+void imx21_soc_init(void);
+void imx25_soc_init(void);
+void imx27_soc_init(void);
+void imx31_soc_init(void);
+void imx35_soc_init(void);
+void imx51_soc_init(void);
+void imx51_init_late(void);
+void imx53_init_late(void);
+void epit_timer_init(void __iomem *base, int irq);
+void mxc_timer_init(void __iomem *, int);
+int mx1_clocks_init(unsigned long fref);
+int mx21_clocks_init(unsigned long lref, unsigned long fref);
+int mx25_clocks_init(void);
+int mx27_clocks_init(unsigned long fref);
+int mx31_clocks_init(unsigned long fref);
+int mx35_clocks_init(void);
+int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2);
-extern int mx25_clocks_init_dt(void);
-extern int mx27_clocks_init_dt(void);
-extern int mx31_clocks_init_dt(void);
-extern int mx51_clocks_init_dt(void);
-extern int mx53_clocks_init_dt(void);
-extern struct platform_device *mxc_register_gpio(char *name, int id,
+int mx25_clocks_init_dt(void);
+int mx27_clocks_init_dt(void);
+int mx31_clocks_init_dt(void);
+struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern void mxc_set_cpu_type(unsigned int type);
-extern void mxc_restart(enum reboot_mode, const char *);
-extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc_arch_reset_init_dt(void);
-extern int mx53_revision(void);
-extern int imx6q_revision(void);
-extern int mx53_display_revision(void);
-extern void imx_set_aips(void __iomem *);
-extern int mxc_device_init(void);
+void mxc_set_cpu_type(unsigned int type);
+void mxc_restart(enum reboot_mode, const char *);
+void mxc_arch_reset_init(void __iomem *);
+void mxc_arch_reset_init_dt(void);
+int mx53_revision(void);
+void imx_set_aips(void __iomem *);
+int mxc_device_init(void);
+void imx_set_soc_revision(unsigned int rev);
+unsigned int imx_get_soc_revision(void);
+void imx_init_revision_from_anatop(void);
+struct device *imx_soc_device_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
@@ -97,8 +96,8 @@
 	MX3_SLEEP,
 };
 
-extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void imx_print_silicon_rev(const char *cpu, int srev);
+void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
+void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
@@ -112,54 +111,61 @@
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
 
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-extern u32 imx_get_cpu_arg(int cpu);
-extern void imx_set_cpu_arg(int cpu, u32 arg);
-extern void v7_cpu_resume(void);
+void imx_enable_cpu(int cpu, bool enable);
+void imx_set_cpu_jump(int cpu, void *jump_addr);
+u32 imx_get_cpu_arg(int cpu);
+void imx_set_cpu_arg(int cpu, u32 arg);
+void v7_cpu_resume(void);
 #ifdef CONFIG_SMP
-extern void v7_secondary_startup(void);
-extern void imx_scu_map_io(void);
-extern void imx_smp_prepare(void);
-extern void imx_scu_standby_enable(void);
+void v7_secondary_startup(void);
+void imx_scu_map_io(void);
+void imx_smp_prepare(void);
+void imx_scu_standby_enable(void);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 static inline void imx_scu_standby_enable(void) {}
 #endif
-extern void imx_src_init(void);
-extern void imx_src_prepare_restart(void);
-extern void imx_gpc_init(void);
-extern void imx_gpc_pre_suspend(void);
-extern void imx_gpc_post_resume(void);
-extern void imx_gpc_mask_all(void);
-extern void imx_gpc_restore_all(void);
-extern void imx_anatop_init(void);
-extern void imx_anatop_pre_suspend(void);
-extern void imx_anatop_post_resume(void);
-extern u32 imx_anatop_get_digprog(void);
-extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_set_chicken_bit(void);
+void imx_src_init(void);
+#ifdef CONFIG_HAVE_IMX_SRC
+void imx_src_prepare_restart(void);
+#else
+static inline void imx_src_prepare_restart(void) {}
+#endif
+void imx_gpc_init(void);
+void imx_gpc_pre_suspend(void);
+void imx_gpc_post_resume(void);
+void imx_gpc_mask_all(void);
+void imx_gpc_restore_all(void);
+void imx_gpc_irq_mask(struct irq_data *d);
+void imx_gpc_irq_unmask(struct irq_data *d);
+void imx_anatop_init(void);
+void imx_anatop_pre_suspend(void);
+void imx_anatop_post_resume(void);
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+void imx6q_set_chicken_bit(void);
 
-extern void imx_cpu_die(unsigned int cpu);
-extern int imx_cpu_kill(unsigned int cpu);
+void imx_cpu_die(unsigned int cpu);
+int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
-extern void imx6q_pm_init(void);
-extern void imx5_pm_init(void);
+void imx6q_pm_init(void);
+void imx6q_pm_set_ccm_base(void __iomem *base);
+void imx5_pm_init(void);
 #else
 static inline void imx6q_pm_init(void) {}
+static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
 static inline void imx5_pm_init(void) {}
 #endif
 
 #ifdef CONFIG_NEON
-extern int mx51_neon_fixup(void);
+int mx51_neon_fixup(void);
 #else
 static inline int mx51_neon_fixup(void) { return 0; }
 #endif
 
 #ifdef CONFIG_CACHE_L2X0
-extern void imx_init_l2cache(void);
+void imx_init_l2cache(void);
 #else
 static inline void imx_init_l2cache(void) {}
 #endif
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index e70e3ac..ba3b498 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,6 +1,9 @@
-
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include "hardware.h"
 #include "common.h"
@@ -8,11 +11,23 @@
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);
 
+static unsigned int imx_soc_revision;
+
 void mxc_set_cpu_type(unsigned int type)
 {
 	__mxc_cpu_type = type;
 }
 
+void imx_set_soc_revision(unsigned int rev)
+{
+	imx_soc_revision = rev;
+}
+
+unsigned int imx_get_soc_revision(void)
+{
+	return imx_soc_revision;
+}
+
 void imx_print_silicon_rev(const char *cpu, int srev)
 {
 	if (srev == IMX_CHIP_REVISION_UNKNOWN)
@@ -44,3 +59,81 @@
 	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
 	__raw_writel(reg, base + 0x50);
 }
+
+struct device * __init imx_soc_device_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *root;
+	const char *soc_id;
+	int ret;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return NULL;
+
+	soc_dev_attr->family = "Freescale i.MX";
+
+	root = of_find_node_by_path("/");
+	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+	of_node_put(root);
+	if (ret)
+		goto free_soc;
+
+	switch (__mxc_cpu_type) {
+	case MXC_CPU_MX1:
+		soc_id = "i.MX1";
+		break;
+	case MXC_CPU_MX21:
+		soc_id = "i.MX21";
+		break;
+	case MXC_CPU_MX25:
+		soc_id = "i.MX25";
+		break;
+	case MXC_CPU_MX27:
+		soc_id = "i.MX27";
+		break;
+	case MXC_CPU_MX31:
+		soc_id = "i.MX31";
+		break;
+	case MXC_CPU_MX35:
+		soc_id = "i.MX35";
+		break;
+	case MXC_CPU_MX51:
+		soc_id = "i.MX51";
+		break;
+	case MXC_CPU_MX53:
+		soc_id = "i.MX53";
+		break;
+	case MXC_CPU_IMX6SL:
+		soc_id = "i.MX6SL";
+		break;
+	case MXC_CPU_IMX6DL:
+		soc_id = "i.MX6DL";
+		break;
+	case MXC_CPU_IMX6Q:
+		soc_id = "i.MX6Q";
+		break;
+	default:
+		soc_id = "Unknown";
+	}
+	soc_dev_attr->soc_id = soc_id;
+
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
+					   (imx_soc_revision >> 4) & 0xf,
+					   imx_soc_revision & 0xf);
+	if (!soc_dev_attr->revision)
+		goto free_soc;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		goto free_rev;
+
+	return soc_device_to_device(soc_dev);
+
+free_rev:
+	kfree(soc_dev_attr->revision);
+free_soc:
+	kfree(soc_dev_attr);
+	return NULL;
+}
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index e02de18..074b1a8 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -171,7 +171,7 @@
 
 static struct irqaction epit_timer_irq = {
 	.name		= "i.MX EPIT Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= epit_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 44a65e9..586e017 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -90,7 +90,7 @@
 		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
 }
 
-static void imx_gpc_irq_unmask(struct irq_data *d)
+void imx_gpc_irq_unmask(struct irq_data *d)
 {
 	void __iomem *reg;
 	u32 val;
@@ -105,7 +105,7 @@
 	writel_relaxed(val, reg);
 }
 
-static void imx_gpc_irq_mask(struct irq_data *d)
+void imx_gpc_irq_mask(struct irq_data *d)
 {
 	void __iomem *reg;
 	u32 val;
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3daf1ed..b35e99c 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -52,7 +52,9 @@
 	 * the register being cleared to kill the cpu.
 	 */
 	imx_set_cpu_arg(cpu, ~0);
-	cpu_do_idle();
+
+	while (1)
+		cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 53e43e5..bece8a6 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -34,17 +34,11 @@
 	NULL
 };
 
-static void __init imx51_timer_init(void)
-{
-	mx51_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
 	.init_irq	= mx51_init_irq,
 	.handle_irq	= imx51_handle_irq,
-	.init_time	= imx51_timer_init,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 368a6e3..58b864a 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -404,8 +404,7 @@
 
 	/* When supported the trigger type have to be BOTH */
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
-			  detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  detect_irq, IRQF_TRIGGER_FALLING,
 			  "sdhc-detect", data);
 
 	if (ret)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 98c5894..c9c4d8d 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -36,17 +36,11 @@
 	NULL
 };
 
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
 	.init_irq	= mx53_init_irq,
 	.handle_irq	= imx53_handle_irq,
-	.init_time	= imx53_timer_init,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 90372a2..0f9f241 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -11,11 +11,8 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
 #include <linux/cpu.h>
-#include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -40,64 +37,6 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static u32 chip_revision;
-
-int imx6q_revision(void)
-{
-	return chip_revision;
-}
-
-static void __init imx6q_init_revision(void)
-{
-	u32 rev = imx_anatop_get_digprog();
-
-	switch (rev & 0xff) {
-	case 0:
-		chip_revision = IMX_CHIP_REVISION_1_0;
-		break;
-	case 1:
-		chip_revision = IMX_CHIP_REVISION_1_1;
-		break;
-	case 2:
-		chip_revision = IMX_CHIP_REVISION_1_2;
-		break;
-	default:
-		chip_revision = IMX_CHIP_REVISION_UNKNOWN;
-	}
-
-	mxc_set_cpu_type(rev >> 16 & 0xff);
-}
-
-static void imx6q_restart(enum reboot_mode mode, const char *cmd)
-{
-	struct device_node *np;
-	void __iomem *wdog_base;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
-	wdog_base = of_iomap(np, 0);
-	if (!wdog_base)
-		goto soft;
-
-	imx_src_prepare_restart();
-
-	/* enable wdog */
-	writew_relaxed(1 << 2, wdog_base);
-	/* write twice to ensure the request will not get ignored */
-	writew_relaxed(1 << 2, wdog_base);
-
-	/* wait for reset to assert ... */
-	mdelay(500);
-
-	pr_err("Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-
-soft:
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
@@ -192,9 +131,20 @@
 
 static void __init imx6q_init_machine(void)
 {
+	struct device *parent;
+
+	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+			      imx_get_soc_revision());
+
+	mxc_arch_reset_init_dt();
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
 	imx6q_enet_phy_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx_anatop_init();
 	imx6q_pm_init();
@@ -269,7 +219,7 @@
 	 * WAIT mode is broken on TO 1.0 and 1.1, so there is no point
 	 * to run cpuidle on them.
 	 */
-	if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
+	if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
 		imx6q_cpuidle_init();
 
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
@@ -286,21 +236,13 @@
 
 static void __init imx6q_init_irq(void)
 {
-	imx6q_init_revision();
+	imx_init_revision_from_anatop();
 	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
 }
 
-static void __init imx6q_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
-			      imx6q_revision());
-}
-
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
@@ -311,9 +253,8 @@
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
-	.init_time	= imx6q_timer_init,
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,
-	.restart	= imx6q_restart,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 0d75dc5..2f952e3 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -7,35 +7,60 @@
  *
  */
 
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/regmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
 
+static void __init imx6sl_fec_init(void)
+{
+	struct regmap *gpr;
+
+	/* set FEC clock from internal PLL clock source */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+			IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0);
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+			IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0);
+	} else {
+		pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");
+	}
+}
+
 static void __init imx6sl_init_machine(void)
 {
+	struct device *parent;
+
 	mxc_arch_reset_init_dt();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+	imx6sl_fec_init();
+	imx_anatop_init();
+	/* Reuse imx6q pm code */
+	imx6q_pm_init();
 }
 
 static void __init imx6sl_init_irq(void)
 {
+	imx_init_revision_from_anatop();
 	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
 }
 
-static void __init imx6sl_timer_init(void)
-{
-	of_clk_init(NULL);
-}
-
 static const char *imx6sl_dt_compat[] __initdata = {
 	"fsl,imx6sl",
 	NULL,
@@ -44,7 +69,6 @@
 DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
 	.map_io		= debug_ll_io_init,
 	.init_irq	= imx6sl_init_irq,
-	.init_time	= imx6sl_timer_init,
 	.init_machine	= imx6sl_init_machine,
 	.dt_compat	= imx6sl_dt_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 1ed9161..50044a2 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -311,7 +311,7 @@
 	}
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
-			  detect_irq, IRQF_DISABLED |
+			  detect_irq,
 			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			  "sdhc1-detect", data);
 	if (ret) {
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index bc0261e..45303bd6 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -371,8 +371,7 @@
 #endif
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-				"sdhc-detect", data);
+			IRQF_TRIGGER_FALLING, "sdhc-detect", data);
 	if (ret)
 		goto err_gpio_free_2;
 
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 816991d..af0cb8a 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -8,9 +8,7 @@
  */
 
 #include <linux/of_platform.h>
-#include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -28,12 +26,6 @@
 	irqchip_init();
 }
 
-static void __init vf610_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static const char *vf610_dt_compat[] __initdata = {
 	"fsl,vf610",
 	NULL,
@@ -41,7 +33,6 @@
 
 DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
 	.init_irq	= vf610_init_irq,
-	.init_time	= vf610_init_time,
 	.init_machine   = vf610_init_machine,
 	.dt_compat	= vf610_dt_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index eb3cce3..d1d5260 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/of_address.h>
 
 #include <asm/mach/map.h>
 
@@ -88,8 +89,15 @@
 
 void __init imx53_init_early(void)
 {
+	struct device_node *np;
+	void __iomem *base;
+
 	mxc_set_cpu_type(MXC_CPU_MX53);
-	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	mxc_iomux_v3_init(base);
 	imx_src_init();
 }
 
@@ -100,7 +108,14 @@
 
 void __init mx53_init_irq(void)
 {
-	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
+	struct device_node *np;
+	void __iomem *base;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	tzic_init_irq(base);
 }
 
 static struct sdma_platform_data imx51_sdma_pdata __initdata = {
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index d4361b8..649fe49 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,8 +130,7 @@
 	gpio_direction_input(gpio_wp);
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
-			  detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  detect_irq, IRQF_TRIGGER_FALLING,
 			  "MMC detect", data);
 	if (ret)
 		goto exit_free_wp;
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 8629e5b..b08ab3a 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -34,6 +34,7 @@
 #define MXC_CPU_MX35		35
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
+#define MXC_CPU_IMX6SL		0x60
 #define MXC_CPU_IMX6DL		0x61
 #define MXC_CPU_IMX6Q		0x63
 
@@ -152,6 +153,11 @@
 #endif
 
 #ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6sl(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6SL;
+}
+
 static inline bool cpu_is_imx6dl(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6DL;
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 2049427..aecd9f8 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -10,9 +10,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/suspend.h>
 #include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
@@ -22,6 +28,147 @@
 #include "common.h"
 #include "hardware.h"
 
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
+
+#define CLPCR				0x54
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define CGPR				0x64
+#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
+
+static void __iomem *ccm_base;
+
+void imx6q_set_chicken_bit(void)
+{
+	u32 val = readl_relaxed(ccm_base + CGPR);
+
+	val |= BM_CGPR_CHICKEN_BIT;
+	writel_relaxed(val, ccm_base + CGPR);
+}
+
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+}
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	struct irq_desc *iomuxc_irq_desc;
+	u32 val = readl_relaxed(ccm_base + CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		if (cpu_is_imx6sl()) {
+			val |= BM_CLPCR_BYPASS_PMIC_READY;
+			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+		} else {
+			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Unmask the always pending IOMUXC interrupt #32 as wakeup source to
+	 * deassert dsm_request signal, so that we can ensure dsm_request
+	 * is not asserted when we're going to write CLPCR register to set LPM.
+	 * After setting up LPM bits, we need to mask this wakeup source.
+	 */
+	iomuxc_irq_desc = irq_to_desc(32);
+	imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
+	writel_relaxed(val, ccm_base + CLPCR);
+	imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
+
+	return 0;
+}
+
 static int imx6q_suspend_finish(unsigned long val)
 {
 	cpu_do_idle();
@@ -33,14 +180,19 @@
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		imx6q_set_lpm(STOP_POWER_OFF);
+		imx6q_enable_wb(true);
+		imx6q_enable_rbc(true);
 		imx_gpc_pre_suspend();
 		imx_anatop_pre_suspend();
 		imx_set_cpu_jump(0, v7_cpu_resume);
 		/* Zzz ... */
 		cpu_suspend(0, imx6q_suspend_finish);
-		imx_smp_prepare();
+		if (cpu_is_imx6q() || cpu_is_imx6dl())
+			imx_smp_prepare();
 		imx_anatop_post_resume();
 		imx_gpc_post_resume();
+		imx6q_enable_rbc(false);
+		imx6q_enable_wb(false);
 		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
@@ -55,7 +207,29 @@
 	.valid = suspend_valid_only_mem,
 };
 
+void __init imx6q_pm_set_ccm_base(void __iomem *base)
+{
+	ccm_base = base;
+}
+
 void __init imx6q_pm_init(void)
 {
+	struct regmap *gpr;
+
+	WARN_ON(!ccm_base);
+
+	/*
+	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
+	 * used to deassert dsm_request signal when the signal gets
+	 * asserted unexpectedly.
+	 */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr))
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
+				   IMX6Q_GPR1_GINT);
+
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	suspend_set_ops(&imx6q_pm_ops);
 }
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 10a6b1a..4754373 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -91,6 +91,7 @@
 	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
+	val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
 	writel_relaxed(val, src_base + SRC_SCR);
 	spin_unlock(&scr_lock);
 }
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 80c177c..e6edcd3 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -42,6 +42,9 @@
 {
 	unsigned int wcr_enable;
 
+	if (cpu_is_imx6q() || cpu_is_imx6dl())
+		imx_src_prepare_restart();
+
 	if (wdog_clk)
 		clk_enable(wdog_clk);
 
@@ -52,6 +55,8 @@
 
 	/* Assert SRS signal */
 	__raw_writew(wcr_enable, wdog_base);
+	/* write twice to ensure the request will not get ignored */
+	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index cd46529..9b6638a 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -250,7 +250,7 @@
 
 static struct irqaction mxc_timer_irq = {
 	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= mxc_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/cm.h
similarity index 88%
rename from arch/arm/mach-integrator/include/mach/cm.h
rename to arch/arm/mach-integrator/cm.h
index 202e6a5..4ecff7b 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/cm.h
@@ -1,9 +1,12 @@
 /*
- * update the core module control register.
+ * access the core module control register.
  */
+u32 cm_get(void);
 void cm_control(u32, u32);
 
-#define CM_CTRL	__io_address(INTEGRATOR_HDR_CTRL)
+struct device_node;
+void cm_init(void);
+void cm_clear_irqs(void);
 
 #define CM_CTRL_LED			(1 << 0)
 #define CM_CTRL_nMBDET			(1 << 1)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 4cdfd73..00ddf20 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -22,76 +22,29 @@
 #include <linux/amba/serial.h>
 #include <linux/io.h>
 #include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/cm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
+#include "cm.h"
 #include "common.h"
 
-#ifdef CONFIG_ATAGS
-
-#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
-#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
-#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
-#define KMI0_IRQ		{ IRQ_KMIINT0 }
-#define KMI1_IRQ		{ IRQ_KMIINT1 }
-
-static AMBA_APB_DEVICE(rtc, "rtc", 0,
-	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart0, "uart0", 0,
-	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart1, "uart1", 0,
-	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL);
-
-static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&rtc_device,
-	&uart0_device,
-	&uart1_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-int __init integrator_init(bool is_cp)
-{
-	int i;
-
-	/*
-	 * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
-	 * hard-code them. The Integator/CP and forward have proper cell IDs.
-	 * Else we leave them undefined to the bus driver can autoprobe them.
-	 */
-	if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
-		rtc_device.periphid	= 0x00041030;
-		uart0_device.periphid	= 0x00041010;
-		uart1_device.periphid	= 0x00041010;
-		kmi0_device.periphid	= 0x00041050;
-		kmi1_device.periphid	= 0x00041050;
-		uart0_device.dev.platform_data = &ap_uart_data;
-		uart1_device.dev.platform_data = &ap_uart_data;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-	return 0;
-}
-
-#endif
-
 static DEFINE_RAW_SPINLOCK(cm_lock);
+static void __iomem *cm_base;
+
+/**
+ * cm_get - get the value from the CM_CTRL register
+ */
+u32 cm_get(void)
+{
+	return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
+}
 
 /**
  * cm_control - update the CM_CTRL register.
@@ -104,12 +57,80 @@
 	u32 val;
 
 	raw_spin_lock_irqsave(&cm_lock, flags);
-	val = readl(CM_CTRL) & ~mask;
-	writel(val | set, CM_CTRL);
+	val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
+	writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
 	raw_spin_unlock_irqrestore(&cm_lock, flags);
 }
 
-EXPORT_SYMBOL(cm_control);
+static const char *integrator_arch_str(u32 id)
+{
+	switch ((id >> 16) & 0xff) {
+	case 0x00:
+		return "ASB little-endian";
+	case 0x01:
+		return "AHB little-endian";
+	case 0x03:
+		return "AHB-Lite system bus, bi-endian";
+	case 0x04:
+		return "AHB";
+	case 0x08:
+		return "AHB system bus, ASB processor bus";
+	default:
+		return "Unknown";
+	}
+}
+
+static const char *integrator_fpga_str(u32 id)
+{
+	switch ((id >> 12) & 0xf) {
+	case 0x01:
+		return "XC4062";
+	case 0x02:
+		return "XC4085";
+	case 0x03:
+		return "XVC600";
+	case 0x04:
+		return "EPM7256AE (Altera PLD)";
+	default:
+		return "Unknown";
+	}
+}
+
+void cm_clear_irqs(void)
+{
+	/* disable core module IRQs */
+	writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
+		IRQ_ENABLE_CLEAR);
+}
+
+static const struct of_device_id cm_match[] = {
+	{ .compatible = "arm,core-module-integrator"},
+	{ },
+};
+
+void cm_init(void)
+{
+	struct device_node *cm = of_find_matching_node(NULL, cm_match);
+	u32 val;
+
+	if (!cm) {
+		pr_crit("no core module node found in device tree\n");
+		return;
+	}
+	cm_base = of_iomap(cm, 0);
+	if (!cm_base) {
+		pr_crit("could not remap core module\n");
+		return;
+	}
+	cm_clear_irqs();
+	val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
+	pr_info("Detected ARM core module:\n");
+	pr_info("    Manufacturer: %02x\n", (val >> 24));
+	pr_info("    Architecture: %s\n", integrator_arch_str(val));
+	pr_info("    FPGA: %s\n", integrator_fpga_str(val));
+	pr_info("    Build: %02x\n", (val >> 4) & 0xFF);
+	pr_info("    Rev: %c\n", ('A' + (val & 0x03)));
+}
 
 /*
  * We need to stop things allocating the low memory; ideally we need a
@@ -145,27 +166,7 @@
 			      struct device_attribute *attr,
 			      char *buf)
 {
-	const char *arch;
-
-	switch ((integrator_id >> 16) & 0xff) {
-	case 0x00:
-		arch = "ASB little-endian";
-		break;
-	case 0x01:
-		arch = "AHB little-endian";
-		break;
-	case 0x03:
-		arch = "AHB-Lite system bus, bi-endian";
-		break;
-	case 0x04:
-		arch = "AHB";
-		break;
-	default:
-		arch = "Unknown";
-		break;
-	}
-
-	return sprintf(buf, "%s\n", arch);
+	return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
 }
 
 static struct device_attribute intcp_arch_attr =
@@ -175,24 +176,7 @@
 			      struct device_attribute *attr,
 			      char *buf)
 {
-	const char *fpga;
-
-	switch ((integrator_id >> 12) & 0xf) {
-	case 0x01:
-		fpga = "XC4062";
-		break;
-	case 0x02:
-		fpga = "XC4085";
-		break;
-	case 0x04:
-		fpga = "EPM7256AE (Altera PLD)";
-		break;
-	default:
-		fpga = "Unknown";
-		break;
-	}
-
-	return sprintf(buf, "%s\n", fpga);
+	return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
 }
 
 static struct device_attribute intcp_fpga_attr =
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
deleted file mode 100644
index eff0ada..0000000
--- a/arch/arm/mach-integrator/include/mach/irqs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupt numbers, all of the above are just static reservations
- * used so they can be encoded into device resources. They will finally
- * be done away with when switching to device tree.
- */
-#define IRQ_PIC_START			64
-#define IRQ_SOFTINT			(IRQ_PIC_START+0)
-#define IRQ_UARTINT0			(IRQ_PIC_START+1)
-#define IRQ_UARTINT1			(IRQ_PIC_START+2)
-#define IRQ_KMIINT0			(IRQ_PIC_START+3)
-#define IRQ_KMIINT1			(IRQ_PIC_START+4)
-#define IRQ_TIMERINT0			(IRQ_PIC_START+5)
-#define IRQ_TIMERINT1			(IRQ_PIC_START+6)
-#define IRQ_TIMERINT2			(IRQ_PIC_START+7)
-#define IRQ_RTCINT			(IRQ_PIC_START+8)
-#define IRQ_AP_EXPINT0			(IRQ_PIC_START+9)
-#define IRQ_AP_EXPINT1			(IRQ_PIC_START+10)
-#define IRQ_AP_EXPINT2			(IRQ_PIC_START+11)
-#define IRQ_AP_EXPINT3			(IRQ_PIC_START+12)
-#define IRQ_AP_PCIINT0			(IRQ_PIC_START+13)
-#define IRQ_AP_PCIINT1			(IRQ_PIC_START+14)
-#define IRQ_AP_PCIINT2			(IRQ_PIC_START+15)
-#define IRQ_AP_PCIINT3			(IRQ_PIC_START+16)
-#define IRQ_AP_V3INT			(IRQ_PIC_START+17)
-#define IRQ_AP_CPINT0			(IRQ_PIC_START+18)
-#define IRQ_AP_CPINT1			(IRQ_PIC_START+19)
-#define IRQ_AP_LBUSTIMEOUT 		(IRQ_PIC_START+20)
-#define IRQ_AP_APCINT			(IRQ_PIC_START+21)
-#define IRQ_CP_CLCDCINT			(IRQ_PIC_START+22)
-#define IRQ_CP_MMCIINT0			(IRQ_PIC_START+23)
-#define IRQ_CP_MMCIINT1			(IRQ_PIC_START+24)
-#define IRQ_CP_AACIINT			(IRQ_PIC_START+25)
-#define IRQ_CP_CPPLDINT			(IRQ_PIC_START+26)
-#define IRQ_CP_ETHINT			(IRQ_PIC_START+27)
-#define IRQ_CP_TSPENINT			(IRQ_PIC_START+28)
-#define IRQ_PIC_END			(IRQ_PIC_START+28)
-
-#define IRQ_CIC_START			(IRQ_PIC_END+1)
-#define IRQ_CM_SOFTINT			(IRQ_CIC_START+0)
-#define IRQ_CM_COMMRX			(IRQ_CIC_START+1)
-#define IRQ_CM_COMMTX			(IRQ_CIC_START+2)
-#define IRQ_CIC_END			(IRQ_CIC_START+2)
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START			(IRQ_CIC_END+1)
-#define IRQ_SIC_CP_SOFTINT		(IRQ_SIC_START+0)
-#define IRQ_SIC_CP_RI0			(IRQ_SIC_START+1)
-#define IRQ_SIC_CP_RI1			(IRQ_SIC_START+2)
-#define IRQ_SIC_CP_CARDIN		(IRQ_SIC_START+3)
-#define IRQ_SIC_CP_LMINT0		(IRQ_SIC_START+4)
-#define IRQ_SIC_CP_LMINT1		(IRQ_SIC_START+5)
-#define IRQ_SIC_CP_LMINT2		(IRQ_SIC_START+6)
-#define IRQ_SIC_CP_LMINT3		(IRQ_SIC_START+7)
-#define IRQ_SIC_CP_LMINT4		(IRQ_SIC_START+8)
-#define IRQ_SIC_CP_LMINT5		(IRQ_SIC_START+9)
-#define IRQ_SIC_CP_LMINT6		(IRQ_SIC_START+10)
-#define IRQ_SIC_CP_LMINT7		(IRQ_SIC_START+11)
-#define IRQ_SIC_END			(IRQ_SIC_START+11)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index d9e95e6..d50dc2d 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -51,13 +51,13 @@
 #include <asm/mach-types.h>
 
 #include <mach/lm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "cm.h"
 #include "common.h"
 #include "pci_v3.h"
 
@@ -146,7 +146,7 @@
 static void irq_resume(void)
 {
 	/* disable all irq sources */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	cm_clear_irqs();
 	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
@@ -402,8 +402,6 @@
 {
 }
 
-#ifdef CONFIG_OF
-
 static void __init ap_of_timer_init(void)
 {
 	struct device_node *node;
@@ -450,8 +448,7 @@
 
 static void __init ap_init_irq_of(void)
 {
-	/* disable core module IRQs */
-	writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	cm_init();
 	of_irq_init(fpga_irq_of_match);
 	integrator_clk_init(false);
 }
@@ -473,6 +470,11 @@
 	{ /* sentinel */ },
 };
 
+static const struct of_device_id ap_syscon_match[] = {
+	{ .compatible = "arm,integrator-ap-syscon"},
+	{ },
+};
+
 static void __init ap_init_of(void)
 {
 	unsigned long sc_dec;
@@ -489,7 +491,8 @@
 	root = of_find_node_by_path("/");
 	if (!root)
 		return;
-	syscon = of_find_node_by_path("/syscon");
+
+	syscon = of_find_matching_node(root, ap_syscon_match);
 	if (!syscon)
 		return;
 
@@ -541,7 +544,7 @@
 		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
 		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
 		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
+		lmdev->irq = irq_of_parse_and_map(syscon, i);
 		lmdev->id = i;
 
 		lm_device_register(lmdev);
@@ -564,136 +567,3 @@
 	.restart	= integrator_restart,
 	.dt_compat      = ap_dt_board_compat,
 MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc ap_io_desc_atag[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init ap_map_io_atag(void)
-{
-	iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
-	ap_map_io();
-}
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-static struct platform_device pci_v3_device = {
-	.name		= "pci-v3",
-	.id		= 0,
-};
-
-static struct resource cfi_flash_resource = {
-	.start		= INTEGRATOR_FLASH_BASE,
-	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ap_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &cfi_flash_resource,
-};
-
-static void __init ap_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	clk = clk_get_sys("ap_timer", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
-
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
-	integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
-				IRQ_TIMERINT1);
-}
-
-#define INTEGRATOR_SC_VALID_INT	0x003fffff
-
-static void __init ap_init_irq(void)
-{
-	/* Disable all interrupts initially. */
-	/* Do the core module ones */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
-	/* do the header card stuff next */
-	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
-		-1, INTEGRATOR_SC_VALID_INT, NULL);
-	integrator_clk_init(false);
-}
-
-static void __init ap_init(void)
-{
-	unsigned long sc_dec;
-	int i;
-
-	platform_device_register(&pci_v3_device);
-	platform_device_register(&cfi_flash_device);
-
-	ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
-	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
-	for (i = 0; i < 4; i++) {
-		struct lm_device *lmdev;
-
-		if ((sc_dec & (16 << i)) == 0)
-			continue;
-
-		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
-		if (!lmdev)
-			continue;
-
-		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
-		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
-		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
-		lmdev->id = i;
-
-		lm_device_register(lmdev);
-	}
-
-	integrator_init(false);
-}
-
-MACHINE_START(INTEGRATOR, "ARM-Integrator")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= ap_map_io_atag,
-	.init_early	= ap_init_early,
-	.init_irq	= ap_init_irq,
-	.handle_irq	= fpga_handle_irq,
-	.init_time	= ap_timer_init,
-	.init_machine	= ap_init,
-	.restart	= integrator_restart,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 8c60fcb..1df6e76 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -36,9 +36,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
 
-#include <mach/cm.h>
 #include <mach/lm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -50,6 +48,7 @@
 #include <plat/clcd.h>
 #include <plat/sched_clock.h>
 
+#include "cm.h"
 #include "common.h"
 
 /* Base address to the CP controller */
@@ -249,7 +248,6 @@
 #endif
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -257,6 +255,7 @@
 
 static void __init intcp_init_irq_of(void)
 {
+	cm_init();
 	of_irq_init(fpga_irq_of_match);
 	integrator_clk_init(true);
 }
@@ -287,6 +286,11 @@
 	{ /* sentinel */ },
 };
 
+static const struct of_device_id intcp_syscon_match[] = {
+	{ .compatible = "arm,integrator-cp-syscon"},
+	{ },
+};
+
 static void __init intcp_init_of(void)
 {
 	struct device_node *root;
@@ -301,7 +305,8 @@
 	root = of_find_node_by_path("/");
 	if (!root)
 		return;
-	cpcon = of_find_node_by_path("/cpcon");
+
+	cpcon = of_find_matching_node(root, intcp_syscon_match);
 	if (!cpcon)
 		return;
 
@@ -354,175 +359,3 @@
 	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
 MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc intcp_io_desc_atag[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init intcp_map_io_atag(void)
-{
-	iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
-	intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
-	intcp_map_io();
-}
-
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-#define INTCP_FLASH_SIZE		SZ_32M
-
-static struct resource intcp_flash_resource = {
-	.start		= INTCP_PA_FLASH_BASE,
-	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &intcp_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &intcp_flash_resource,
-};
-
-#define INTCP_ETH_SIZE			0x10
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= INTEGRATOR_CP_ETH_BASE,
-		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CP_ETHINT,
-		.end	= IRQ_CP_ETHINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
-	&intcp_flash_device,
-	&smc91x_device,
-};
-
-#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
-
-static void __init intcp_init_irq(void)
-{
-	u32 pic_mask, cic_mask, sic_mask;
-
-	/* These masks are for the HW IRQ registers */
-	pic_mask = ~((~0u) << (11 - 0));
-	pic_mask |= (~((~0u) << (29 - 22))) << 22;
-	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
-	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
-	/*
-	 * Disable all interrupt sources
-	 */
-	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
-		      -1, pic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
-		      -1, cic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		      IRQ_CP_CPPLDINT, sic_mask, NULL);
-
-	integrator_clk_init(true);
-}
-
-#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-
-static void __init cp_timer_init(void)
-{
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
-	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
-}
-
-#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
-	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
-	INTEGRATOR_CP_AACI_IRQS, NULL);
-
-static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
-	{ IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&mmc_device,
-	&aaci_device,
-	&clcd_device,
-};
-
-static void __init intcp_init(void)
-{
-	int i;
-
-	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-	integrator_init(true);
-}
-
-MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= intcp_map_io_atag,
-	.init_early	= intcp_init_early,
-	.init_irq	= intcp_init_irq,
-	.handle_irq	= fpga_handle_irq,
-	.init_time	= cp_timer_init,
-	.init_machine	= intcp_init,
-	.restart	= integrator_restart,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 7a7f6d3..cb6ac58 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -11,10 +11,11 @@
 #include <linux/slab.h>
 #include <linux/leds.h>
 
-#include <mach/cm.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
 
+#include "cm.h"
+
 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
 
 #define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
@@ -78,7 +79,7 @@
 
 static enum led_brightness cm_led_get(struct led_classdev *cdev)
 {
-	u32 reg = readl(CM_CTRL);
+	u32 reg = cm_get();
 
 	return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
 }
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index bef1005..c9c5a33 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -36,7 +36,6 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/map.h>
 #include <asm/signal.h>
@@ -605,7 +604,7 @@
 	return 1;
 }
 
-static irqreturn_t v3_irq(int dummy, void *devid)
+static irqreturn_t v3_irq(int irq, void *devid)
 {
 #ifdef CONFIG_DEBUG_LL
 	struct pt_regs *regs = get_irq_regs();
@@ -615,7 +614,7 @@
 	extern void printascii(const char *);
 
 	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
-		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
+		"ISTAT=%02x\n", irq, pc, instr,
 		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
 		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
 		v3_readb(V3_LB_ISTAT));
@@ -809,32 +808,6 @@
 	return pci_common_swizzle(dev, pinp);
 }
 
-static int irq_tab[4] __initdata = {
-	IRQ_AP_PCIINT0,	IRQ_AP_PCIINT1,	IRQ_AP_PCIINT2,	IRQ_AP_PCIINT3
-};
-
-/*
- * map the specified device/slot/pin to an IRQ.  This works out such
- * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
- */
-static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int intnr = ((slot - 9) + (pin - 1)) & 3;
-
-	return irq_tab[intnr];
-}
-
-static struct hw_pci pci_v3 __initdata = {
-	.swizzle		= pci_v3_swizzle,
-	.setup			= pci_v3_setup,
-	.nr_controllers		= 1,
-	.ops			= &pci_v3_ops,
-	.preinit		= pci_v3_preinit,
-	.postinit		= pci_v3_postinit,
-};
-
-#ifdef CONFIG_OF
-
 static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct of_irq oirq;
@@ -851,14 +824,36 @@
 				     oirq.size);
 }
 
-static int __init pci_v3_dtprobe(struct platform_device *pdev,
-				struct device_node *np)
+static struct hw_pci pci_v3 __initdata = {
+	.swizzle		= pci_v3_swizzle,
+	.setup			= pci_v3_setup,
+	.nr_controllers		= 1,
+	.ops			= &pci_v3_ops,
+	.preinit		= pci_v3_preinit,
+	.postinit		= pci_v3_postinit,
+};
+
+static int __init pci_v3_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct of_pci_range_parser parser;
 	struct of_pci_range range;
 	struct resource *res;
 	int irq, ret;
 
+	/* Remap the Integrator system controller */
+	ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
+	if (!ap_syscon_base) {
+		dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
+		return -ENODEV;
+	}
+
+	/* Device tree probe path */
+	if (!np) {
+		dev_err(&pdev->dev, "no device tree node for PCIv3\n");
+		return -ENODEV;
+	}
+
 	if (of_pci_range_parser_init(&parser, np))
 		return -EINVAL;
 
@@ -925,76 +920,6 @@
 	return 0;
 }
 
-#else
-
-static inline int pci_v3_dtprobe(struct platform_device *pdev,
-				  struct device_node *np)
-{
-	return -EINVAL;
-}
-
-#endif
-
-static int __init pci_v3_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	/* Remap the Integrator system controller */
-	ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-	if (!ap_syscon_base) {
-		dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
-		return -ENODEV;
-	}
-
-	/* Device tree probe path */
-	if (np)
-		return pci_v3_dtprobe(pdev, np);
-
-	pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K);
-	if (!pci_v3_base) {
-		dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
-		return -ENODEV;
-	}
-
-	ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n",
-			ret);
-		return -ENODEV;
-	}
-
-	conf_mem.name = "PCIv3 config";
-	conf_mem.start = PHYS_PCI_CONFIG_BASE;
-	conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1;
-	conf_mem.flags = IORESOURCE_MEM;
-
-	io_mem.name = "PCIv3 I/O";
-	io_mem.start = PHYS_PCI_IO_BASE;
-	io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1;
-	io_mem.flags = IORESOURCE_MEM;
-
-	non_mem_pci = 0x00000000;
-	non_mem_pci_sz = SZ_256M;
-	non_mem.name = "PCIv3 non-prefetched mem";
-	non_mem.start = PHYS_PCI_MEM_BASE;
-	non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1;
-	non_mem.flags = IORESOURCE_MEM;
-
-	pre_mem_pci = 0x10000000;
-	pre_mem_pci_sz = SZ_256M;
-	pre_mem.name = "PCIv3 prefetched mem";
-	pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M;
-	pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1;
-	pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
-	pci_v3.map_irq = pci_v3_map_irq;
-
-	pci_common_init_dev(&pdev->dev, &pci_v3);
-
-	return 0;
-}
-
 static const struct of_device_id pci_ids[] = {
 	{ .compatible = "v3,v360epc-pci", },
 	{},
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 366d1a3..f20c53e 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -9,6 +9,8 @@
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_ERRATA_798181 if SMP
+	select COMMON_CLK_KEYSTONE
+	select TI_EDMA
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index ddc52b0..25d9239 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -4,3 +4,6 @@
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_SMP)			+= platsmp.o
+
+# PM domain driver for Keystone SOCs
+obj-$(CONFIG_ARCH_KEYSTONE)		+= pm_domain.o
diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
new file mode 100644
index 0000000..2962523
--- /dev/null
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -0,0 +1,82 @@
+/*
+ * PM domain driver for Keystone2 devices
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *	Santosh Shilimkar <santosh.shillimkar@ti.com>
+ *
+ * Based on Kevins work on DAVINCI SOCs
+ *	Kevin Hilman <khilman@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_clock.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#ifdef CONFIG_PM_RUNTIME
+static int keystone_pm_runtime_suspend(struct device *dev)
+{
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = pm_generic_runtime_suspend(dev);
+	if (ret)
+		return ret;
+
+	ret = pm_clk_suspend(dev);
+	if (ret) {
+		pm_generic_runtime_resume(dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int keystone_pm_runtime_resume(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+
+	pm_clk_resume(dev);
+
+	return pm_generic_runtime_resume(dev);
+}
+#endif
+
+static struct dev_pm_domain keystone_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend,
+				   keystone_pm_runtime_resume, NULL)
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
+
+static struct pm_clk_notifier_block platform_domain_notifier = {
+	.pm_domain = &keystone_pm_domain,
+};
+
+static struct of_device_id of_keystone_table[] = {
+	{.compatible = "ti,keystone"},
+	{ /* end of list */ },
+};
+
+int __init keystone_pm_runtime_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_keystone_table);
+	if (!np)
+		return 0;
+
+	of_clk_init(NULL);
+	pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier);
+
+	return 0;
+}
+subsys_initcall(keystone_pm_runtime_init);
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d1f8e3d..144b511 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,7 @@
 obj-y				+= common.o pcie.o
 obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o
+obj-$(CONFIG_PM)		+= pm.o
+
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 82d3ad8..9caa4fe 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -13,9 +13,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
 #include <linux/of_platform.h>
 #include <linux/clk-provider.h>
-#include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/irqchip.h>
 #include <linux/kexec.h>
@@ -44,14 +45,6 @@
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CGC_BIT_PEX0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CGC_BIT_PEX1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
 	/*
 	 * The ethernet interfaces forget the MAC address assigned by
 	 * u-boot if the clocks are turned off. Until proper DT support
@@ -66,17 +59,83 @@
 	clk_prepare_enable(clk);
 }
 
-static void __init kirkwood_dt_time_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
+#define MV643XX_ETH_MAC_ADDR_LOW	0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
 
-static void __init kirkwood_dt_init_early(void)
+static void __init kirkwood_dt_eth_fixup(void)
 {
-	mvebu_mbus_init("marvell,kirkwood-mbus",
-			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
-			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
+	struct device_node *np;
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by u-boot
+	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
+	 * has no DT support to properly set local-mac-address property.
+	 * As a workaround, we get the MAC address from mv643xx_eth registers
+	 * and update the port device node if no valid MAC address is set.
+	 */
+	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+		struct device_node *pnp = of_get_parent(np);
+		struct clk *clk;
+		struct property *pmac;
+		void __iomem *io;
+		u8 *macaddr;
+		u32 reg;
+
+		if (!pnp)
+			continue;
+
+		/* skip disabled nodes or nodes with valid MAC address*/
+		if (!of_device_is_available(pnp) || of_get_mac_address(np))
+			goto eth_fixup_skip;
+
+		clk = of_clk_get(pnp, 0);
+		if (IS_ERR(clk))
+			goto eth_fixup_skip;
+
+		io = of_iomap(pnp, 0);
+		if (!io)
+			goto eth_fixup_no_map;
+
+		/* ensure port clock is not gated to not hang CPU */
+		clk_prepare_enable(clk);
+
+		/* store MAC address register contents in local-mac-address */
+		pr_err(FW_INFO "%s: local-mac-address is not set\n",
+		       np->full_name);
+
+		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+		if (!pmac)
+			goto eth_fixup_no_mem;
+
+		pmac->value = pmac + 1;
+		pmac->length = 6;
+		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!pmac->name) {
+			kfree(pmac);
+			goto eth_fixup_no_mem;
+		}
+
+		macaddr = pmac->value;
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+		macaddr[0] = (reg >> 24) & 0xff;
+		macaddr[1] = (reg >> 16) & 0xff;
+		macaddr[2] = (reg >> 8) & 0xff;
+		macaddr[3] = reg & 0xff;
+
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+		macaddr[4] = (reg >> 8) & 0xff;
+		macaddr[5] = reg & 0xff;
+
+		of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+		iounmap(io);
+		clk_disable_unprepare(clk);
+eth_fixup_no_map:
+		clk_put(clk);
+eth_fixup_skip:
+		of_node_put(pnp);
+	}
 }
 
 static void __init kirkwood_dt_init(void)
@@ -92,16 +151,16 @@
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
 	BUG_ON(mvebu_mbus_dt_init());
-	kirkwood_setup_wins();
 
 	kirkwood_l2_init();
 
 	kirkwood_cpufreq_init();
-
+	kirkwood_cpuidle_init();
 	/* Setup clocks for legacy devices */
 	kirkwood_legacy_clk_init();
 
-	kirkwood_cpuidle_init();
+	kirkwood_pm_init();
+	kirkwood_dt_eth_fixup();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
@@ -121,8 +180,6 @@
 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
 	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
 	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_dt_init_early,
-	.init_time	= kirkwood_dt_time_init,
 	.init_machine	= kirkwood_dt_init,
 	.restart	= kirkwood_restart,
 	.dt_compat	= kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 1767611..f3407a5 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -721,6 +721,7 @@
 	kirkwood_xor1_init();
 	kirkwood_crypto_init();
 
+	kirkwood_pm_init();
 	kirkwood_cpuidle_init();
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 1296de9..05fd648 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,6 +58,12 @@
 void kirkwood_restart(enum reboot_mode, const char *);
 void kirkwood_clk_init(void);
 
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
 /* board init functions for boards not fully converted to fdt */
 #ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
 void mv88f6281gtw_ge_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 91242c9..8b9d1c9 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -78,4 +78,6 @@
 #define CGC_TDM			(1 << 20)
 #define CGC_RESERVED		(0x6 << 21)
 
+#define MEMORY_PM_CTRL		(BRIDGE_VIRT_BASE + 0x118)
+
 #endif
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
new file mode 100644
index 0000000..8783a71
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -0,0 +1,73 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+
+static void __iomem *ddr_operation_base;
+
+static void kirkwood_low_power(void)
+{
+	u32 mem_pm_ctrl;
+
+	mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+
+	/* Set peripherals to low-power mode */
+	writel_relaxed(~0, MEMORY_PM_CTRL);
+
+	/* Set DDR in self-refresh */
+	writel_relaxed(0x7, ddr_operation_base);
+
+	/*
+	 * Set CPU in wait-for-interrupt state.
+	 * This disables the CPU core clocks,
+	 * the array clocks, and also the L2 controller.
+	 */
+	cpu_do_idle();
+
+	writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		kirkwood_low_power();
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+	.enter = kirkwood_suspend_enter,
+	.valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	suspend_set_ops(&kirkwood_suspend_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 905efc8..2586c28 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,12 +1,12 @@
 if ARCH_MSM
 
 comment "Qualcomm MSM SoC Type"
-	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+	depends on ARCH_MSM_DT
 
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
-	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+	depends on !ARCH_MSM_DT
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
@@ -49,7 +49,6 @@
 	select GPIO_MSM_V2
 	select HAVE_SMP
 	select MSM_SCM if SMP
-	select USE_OF
 
 config ARCH_MSM8960
 	bool "MSM8960"
@@ -58,6 +57,11 @@
 	select HAVE_SMP
 	select GPIO_MSM_V2
 	select MSM_SCM if SMP
+
+config ARCH_MSM_DT
+	def_bool y
+	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+	select SPARSE_IRQ
 	select USE_OF
 
 config MSM_HAS_DEBUG_UART_HS
@@ -68,6 +72,7 @@
 
 config  ARCH_MSM_ARM11
 	bool
+
 config  ARCH_MSM_SCORPION
 	bool
 
@@ -75,6 +80,7 @@
 	bool
 
 menu "Qualcomm MSM Board Type"
+	depends on !ARCH_MSM_DT
 
 config MACH_HALIBUT
 	depends on ARCH_MSM
@@ -122,6 +128,7 @@
 
 config MSM_GPIOMUX
 	bool
+	depends on !ARCH_MSM_DT
 	help
 	  Support for MSM V1 TLMM GPIOMUX architecture.
 
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d872634..7ed4c1b 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -26,7 +26,6 @@
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
-obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
+obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
 obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
deleted file mode 100644
index c294689..0000000
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static void __init msm8x60_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
-	{}
-};
-
-static void __init msm8x60_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
-	"qcom,msm8660-fluid",
-	"qcom,msm8660-surf",
-	NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.smp = smp_ops(msm_smp_ops),
-	.init_machine = msm8x60_dt_init,
-	.init_late = msm8x60_init_late,
-	.dt_compat = msm8x60_fluid_match,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt.c
similarity index 64%
rename from arch/arm/mach-msm/board-dt-8960.c
rename to arch/arm/mach-msm/board-dt.c
index d4ca52c..16e6183 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -11,6 +11,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
@@ -18,18 +19,14 @@
 
 #include "common.h"
 
-static void __init msm_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const msm8960_dt_match[] __initconst = {
+static const char * const msm_dt_match[] __initconst = {
+	"qcom,msm8660-fluid",
+	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
 	NULL
 };
 
-DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.smp = smp_ops(msm_smp_ops),
-	.init_machine = msm_dt_init,
-	.dt_compat = msm8960_dt_match,
+	.dt_compat = msm_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/irqs-8960.h b/arch/arm/mach-msm/include/mach/irqs-8960.h
deleted file mode 100644
index 81ab2a6..0000000
--- a/arch/arm/mach-msm/include/mach/irqs-8960.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/* Copyright (c) 2011 Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8960_H
-#define __ASM_ARCH_MSM_IRQS_8960_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
-   16-31: PPI (private peripheral interrupts)
-   32+:   SPI (shared peripheral interrupts) */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_VGIC				(GIC_PPI_START + 0)
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 2)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 3)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 5)
-#define AVS_SVICINT				(GIC_PPI_START + 6)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 8)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 9)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 10)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 11)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 12)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 13)
-#define SC_SICCPUXEXTFAULTIRPTREQ		(GIC_PPI_START + 14)
-/* PPI 15 is unused */
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2PERFMONIRPTREQ			(GIC_SPI_START + 2)
-#define SC_SICAGCIRPTREQ			(GIC_SPI_START + 3)
-#define TLMM_APCC_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_APCC_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_APCC_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_APCC_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_APCC_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_APCC_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_APCC_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_APCC_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_APCC_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_APCC_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8921_SEC_IRQ_103			(GIC_SPI_START + 14)
-#define PM8018_SEC_IRQ_106			(GIC_SPI_START + 15)
-#define TLMM_APCC_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_APCC_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_APCC_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_APCC_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_APCC_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_APCC_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_APCC_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_APCC_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_APCC_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define SLIMBUS0_CORE_EE1_IRQ			(GIC_SPI_START + 33)
-#define SLIMBUS0_BAM_EE1_IRQ			(GIC_SPI_START + 34)
-#define Q6FW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 35)
-#define Q6SW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 36)
-#define MSS_TO_APPS_IRQ_0			(GIC_SPI_START + 37)
-#define MSS_TO_APPS_IRQ_1			(GIC_SPI_START + 38)
-#define MSS_TO_APPS_IRQ_2			(GIC_SPI_START + 39)
-#define MSS_TO_APPS_IRQ_3			(GIC_SPI_START + 40)
-#define MSS_TO_APPS_IRQ_4			(GIC_SPI_START + 41)
-#define MSS_TO_APPS_IRQ_5			(GIC_SPI_START + 42)
-#define MSS_TO_APPS_IRQ_6			(GIC_SPI_START + 43)
-#define MSS_TO_APPS_IRQ_7			(GIC_SPI_START + 44)
-#define MSS_TO_APPS_IRQ_8			(GIC_SPI_START + 45)
-#define MSS_TO_APPS_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI1_IRQ				(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define CSIPHY_4LN_IRQ				(GIC_SPI_START + 139)
-#define CSIPHY_2LN_IRQ				(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define GSBI1_UARTDM_IRQ			(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define GSBI2_UARTDM_IRQ			(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ			        (GIC_SPI_START + 149)
-#define GSBI3_UARTDM_IRQ			(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define GSBI4_UARTDM_IRQ			(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define GSBI5_UARTDM_IRQ			(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define GSBI6_UARTDM_IRQ			(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define GSBI7_UARTDM_IRQ			(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define GSBI8_UARTDM_IRQ			(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define DSI2_IRQ				(GIC_SPI_START + 166)
-#define ISPIF_IRQ				(GIC_SPI_START + 167)
-#define MSMC_SC_SEC_TMR_IRQ			(GIC_SPI_START + 168)
-#define MSMC_SC_SEC_WDOG_BARK_IRQ		(GIC_SPI_START + 169)
-#define INT_ADM0_SCSS_0_IRQ			(GIC_SPI_START + 170)
-#define INT_ADM0_SCSS_1_IRQ			(GIC_SPI_START + 171)
-#define INT_ADM0_SCSS_2_IRQ			(GIC_SPI_START + 172)
-#define INT_ADM0_SCSS_3_IRQ			(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_EBI1CH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1CH1_IRQ			(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define GSBI9_UARTDM_IRQ			(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define GSBI10_UARTDM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define GSBI11_UARTDM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define GSBI12_UARTDM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-#define RIVA_APSS_LTECOEX_IRQ			(GIC_SPI_START + 197)
-#define RIVA_APSS_SPARE_IRQ			(GIC_SPI_START + 198)
-#define RIVA_APSS_WDOG_BITE_RESET_RDY_IRQ	(GIC_SPI_START + 199)
-#define RIVA_ASS_RESET_DONE_IRQ			(GIC_SPI_START + 200)
-#define RIVA_APSS_ASIC_IRQ			(GIC_SPI_START + 201)
-#define RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ	(GIC_SPI_START + 202)
-#define RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ	(GIC_SPI_START + 203)
-#define RIVA_APPS_WLAM_SMSM_IRQ			(GIC_SPI_START + 204)
-#define RIVA_APPS_LOG_CTRL_IRQ			(GIC_SPI_START + 205)
-#define RIVA_APPS_FM_CTRL_IRQ			(GIC_SPI_START + 206)
-#define RIVA_APPS_HCI_IRQ			(GIC_SPI_START + 207)
-#define RIVA_APPS_WLAN_CTRL_IRQ			(GIC_SPI_START + 208)
-#define A2_BAM_IRQ				(GIC_SPI_START + 209)
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 211)
-#define GFX2D1_IRQ				(GIC_SPI_START + 212)
-#define PPSS_WDOG_TIMER_IRQ			(GIC_SPI_START + 213)
-#define SPS_SLIMBUS_CORE_EE0_IRQ		(GIC_SPI_START + 214)
-#define SPS_SLIMBUS_BAM_EE0_IRQ			(GIC_SPI_START + 215)
-#define QDSS_ETB_IRQ				(GIC_SPI_START + 216)
-#define QDSS_CTI2KPSS_CPU1_IRQ			(GIC_SPI_START + 217)
-#define QDSS_CTI2KPSS_CPU0_IRQ			(GIC_SPI_START + 218)
-#define TLMM_APCC_DIR_CONN_IRQ_16		(GIC_SPI_START + 219)
-#define TLMM_APCC_DIR_CONN_IRQ_17		(GIC_SPI_START + 220)
-#define TLMM_APCC_DIR_CONN_IRQ_18		(GIC_SPI_START + 221)
-#define TLMM_APCC_DIR_CONN_IRQ_19		(GIC_SPI_START + 222)
-#define TLMM_APCC_DIR_CONN_IRQ_20		(GIC_SPI_START + 223)
-#define TLMM_APCC_DIR_CONN_IRQ_21		(GIC_SPI_START + 224)
-#define PM8921_SEC_IRQ_104			(GIC_SPI_START + 225)
-#define PM8018_SEC_IRQ_107			(GIC_SPI_START + 226)
-
-/* For now, use the maximum number of interrupts until a pending GIC issue
- * is sorted out */
-#define NR_MSM_IRQS 1020
-#define NR_BOARD_IRQS 0
-#define NR_GPIO_IRQS 0
-
-#endif
-
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
deleted file mode 100644
index f65841c..0000000
--- a/arch/arm/mach-msm/include/mach/irqs-8x60.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
-#define __ASM_ARCH_MSM_IRQS_8X60_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
- * 16-31: PPI (private peripheral interrupts)
- * 32+:   SPI (shared peripheral interrupts)
- */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 0)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 2)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 3)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define AVS_SVICINT				(GIC_PPI_START + 5)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 6)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 8)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 9)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 10)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 11)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 12)
-/* PPI 13 to 15 are unused */
-
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2ACGIRPTREQ			(GIC_SPI_START + 2)
-#define NC					(GIC_SPI_START + 3)
-#define TLMM_SCSS_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_SCSS_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_SCSS_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_SCSS_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_SCSS_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_SCSS_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_SCSS_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_SCSS_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_SCSS_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_SCSS_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8058_SEC_IRQ_N			(GIC_SPI_START + 14)
-#define PM8901_SEC_IRQ_N			(GIC_SPI_START + 15)
-#define TLMM_SCSS_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_SCSS_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_SCSS_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_SCSS_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_SCSS_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_SCSS_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_SCSS_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_INT		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_INT		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define MARM_FIQ				(GIC_SPI_START + 33)
-#define MARM_IRQ				(GIC_SPI_START + 34)
-#define MARM_L2CC_IRQ				(GIC_SPI_START + 35)
-#define MARM_WDOG_EXPIRED			(GIC_SPI_START + 36)
-#define MARM_SCSS_GP_IRQ_0			(GIC_SPI_START + 37)
-#define MARM_SCSS_GP_IRQ_1			(GIC_SPI_START + 38)
-#define MARM_SCSS_GP_IRQ_2			(GIC_SPI_START + 39)
-#define MARM_SCSS_GP_IRQ_3			(GIC_SPI_START + 40)
-#define MARM_SCSS_GP_IRQ_4			(GIC_SPI_START + 41)
-#define MARM_SCSS_GP_IRQ_5			(GIC_SPI_START + 42)
-#define MARM_SCSS_GP_IRQ_6			(GIC_SPI_START + 43)
-#define MARM_SCSS_GP_IRQ_7			(GIC_SPI_START + 44)
-#define MARM_SCSS_GP_IRQ_8			(GIC_SPI_START + 45)
-#define MARM_SCSS_GP_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI_IRQ					(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define UXMC_EBI2_WR_ER_DONE_IRQ		(GIC_SPI_START + 139)
-#define UXMC_EBI2_OP_DONE_IRQ			(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define INT_UART1DM_IRQ				(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define INT_UART2DM_IRQ				(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ				(GIC_SPI_START + 149)
-#define INT_UART3DM_IRQ				(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define INT_UART4DM_IRQ				(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define INT_UART5DM_IRQ				(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define INT_UART6DM_IRQ				(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define INT_UART7DM_IRQ				(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define INT_UART8DM_IRQ				(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define INT_ADM1_MASTER				(GIC_SPI_START + 166)
-#define INT_ADM1_AARM				(GIC_SPI_START + 167)
-#define INT_ADM1_SD2				(GIC_SPI_START + 168)
-#define INT_ADM1_SD3				(GIC_SPI_START + 169)
-#define INT_ADM0_MASTER				(GIC_SPI_START + 170)
-#define INT_ADM0_AARM				(GIC_SPI_START + 171)
-#define INT_ADM0_SD2				(GIC_SPI_START + 172)
-#define INT_ADM0_SD3				(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_SMICH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1_IRQ				(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define INT_UART9DM_IRQ				(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define INT_UART10DM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define INT_UART11DM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define INT_UART12DM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-
-/*SPI 197 to 209 arent used in 8x60*/
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ            (GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ        (GIC_SPI_START + 211)
-
-/*SPI 212 to 216 arent used in 8x60*/
-#define SMPSS_SPARE_1				(GIC_SPI_START + 217)
-#define SMPSS_SPARE_2				(GIC_SPI_START + 218)
-#define SMPSS_SPARE_3				(GIC_SPI_START + 219)
-#define SMPSS_SPARE_4				(GIC_SPI_START + 220)
-#define SMPSS_SPARE_5				(GIC_SPI_START + 221)
-#define SMPSS_SPARE_6				(GIC_SPI_START + 222)
-#define SMPSS_SPARE_7				(GIC_SPI_START + 223)
-
-#define NR_GPIO_IRQS 173
-#define NR_MSM_IRQS 256
-#define NR_BOARD_IRQS 0
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 3cd78b1..164d355 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -24,11 +24,6 @@
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "irqs-8x50.h"
 #include "sirc.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "irqs-8x60.h"
-#elif defined(CONFIG_ARCH_MSM8960)
-/* TODO: Make these not generic. */
-#include "irqs-8960.h"
 #elif defined(CONFIG_ARCH_MSM_ARM11)
 #include "irqs-7x00.h"
 #else
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 98f6e2a..1dc5acd 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -13,8 +13,6 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -332,6 +330,11 @@
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
+static void __init m28cu3_init(void)
+{
+	update_fec_mac_prop(OUI_DENX);
+}
+
 static const char __init *mxs_get_soc_id(void)
 {
 	struct device_node *np;
@@ -459,6 +462,8 @@
 		apx4devkit_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
 		crystalfontz_init();
+	else if (of_machine_is_compatible("msr,m28cu3"))
+		m28cu3_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     NULL, parent);
@@ -490,16 +495,6 @@
 	soft_restart(0);
 }
 
-static void __init mxs_timer_init(void)
-{
-	if (of_machine_is_compatible("fsl,imx23"))
-		mx23_clocks_init();
-	else
-		mx28_clocks_init();
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static const char *mxs_dt_compat[] __initdata = {
 	"fsl,imx28",
 	"fsl,imx23",
@@ -508,7 +503,6 @@
 
 DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
 	.handle_irq	= icoll_handle_irq,
-	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
 	.init_late      = mxs_pm_init,
 	.dt_compat	= mxs_dt_compat,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 13e0df9..cce2c9d 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,15 +25,11 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_data/clk-nomadik.h>
-#include <linux/clocksource.h>
 #include <linux/of_irq.h>
 #include <linux/of_gpio.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/mtd/fsmc.h>
 #include <linux/gpio.h>
-#include <linux/amba/mmci.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -113,50 +109,6 @@
 	writel(1, srcbase + 0x18);
 }
 
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
-
-static void __init cpu8815_timer_init_of(void)
-{
-	struct device_node *mtu;
-	void __iomem *base;
-	int irq;
-	u32 src_cr;
-
-	/* We need this to be up now */
-	nomadik_clk_init();
-
-	mtu = of_find_node_by_path("/mtu@101e2000");
-	if (!mtu)
-		return;
-	base = of_iomap(mtu, 0);
-	if (WARN_ON(!base))
-		return;
-	irq = irq_of_parse_and_map(mtu, 0);
-
-	pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
-
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(base);
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, base);
-
-	clocksource_of_init();
-}
-
-static struct fsmc_nand_timings cpu8815_nand_timings = {
-	.thiz	= 0,
-	.thold	= 0x10,
-	.twait	= 0x0A,
-	.tset	= 0,
-};
-
-static struct fsmc_nand_platform_data cpu8815_nand_data = {
-	.nand_timings = &cpu8815_nand_timings,
-};
-
 /*
  * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
  * to simply request an IRQ passed as a resource. So the GPIO pin needs
@@ -190,15 +142,6 @@
 device_initcall(cpu8815_eth_init);
 
 /*
- * TODO:
- * cannot be set from device tree, convert to a proper DT
- * binding.
- */
-static struct mmci_platform_data mmcsd_plat_data = {
-	.ocr_mask = MMC_VDD_29_30,
-};
-
-/*
  * This GPIO pin turns on a line that is used to detect card insertion
  * on this board.
  */
@@ -232,24 +175,13 @@
 }
 device_initcall(cpu8815_mmcsd_init);
 
-
-/* These are mostly to get the right device names for the clock lookups */
-static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
-		NULL, &cpu8815_nand_data),
-	OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
-		NULL, &mmcsd_plat_data),
-	{ /* sentinel */ },
-};
-
 static void __init cpu8815_init_of(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	/* At full speed latency must be >=2, so 0x249 in low bits */
 	l2x0_of_init(0x00730249, 0xfe000fff);
 #endif
-	of_platform_populate(NULL, of_default_bus_match_table,
-			cpu8815_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * cpu8815_board_compat[] = {
@@ -259,7 +191,6 @@
 
 DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
 	.map_io		= cpu8815_map_io,
-	.init_time	= cpu8815_timer_init_of,
 	.init_machine	= cpu8815_init_of,
 	.restart	= cpu8815_restart,
 	.dt_compat      = cpu8815_board_compat,
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 99e2609..4b2ed2e 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -14,11 +14,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-vic.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -65,12 +63,6 @@
 			nspire_auxdata, NULL);
 }
 
-static void __init nspire_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void nspire_restart(char mode, const char *cmd)
 {
 	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
@@ -83,7 +75,6 @@
 DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
 	.dt_compat	= nspire_dt_match,
 	.map_io		= nspire_map_io,
-	.init_time	= nspire_init_time,
 	.init_machine	= nspire_init,
 	.restart	= nspire_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index abec019..732f8ee 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -46,6 +46,9 @@
 void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
+static inline void omap1510_fpga_init_irq(void)
+{
+}
 static inline void omap15xx_map_io(void)
 {
 }
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 8bd71b2..3c0e422 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -135,8 +135,7 @@
  * mask_ack routine for all of the FPGA interrupts has been changed from
  * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
  * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is installed with the IRQF_DISABLED flag, which leaves all
- * interrupts masked at the CPU while an FPGA interrupt handler executes.
+ * interrupt is run with all interrupts masked.
  *
  * Limited testing indicates that this workaround appears to be effective
  * for the smc9194 Ethernet driver used on the Innovator.  It should work
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 02b3eb2..312a092 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -25,7 +25,7 @@
 #define OMAP1510_GPIO_BASE		0xFFFCE000
 
 /* gpio1 */
-static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
+static struct resource omap15xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -48,7 +48,7 @@
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -66,7 +66,7 @@
 };
 
 /* gpio2 */
-static struct __initdata resource omap15xx_gpio_resources[] = {
+static struct resource omap15xx_gpio_resources[] = {
 	{
 		.start	= OMAP1510_GPIO_BASE,
 		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
@@ -90,7 +90,7 @@
 	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index b9952a2..6e6ec93 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -31,7 +31,7 @@
 #define SYSCONFIG_WORD			0x14
 
 /* mpu gpio */
-static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
+static struct resource omap16xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -54,7 +54,7 @@
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -72,7 +72,7 @@
 };
 
 /* gpio1 */
-static struct __initdata resource omap16xx_gpio1_resources[] = {
+static struct resource omap16xx_gpio1_resources[] = {
 	{
 		.start	= OMAP1610_GPIO1_BASE,
 		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
@@ -100,7 +100,7 @@
 	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
+static struct omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -116,7 +116,7 @@
 };
 
 /* gpio2 */
-static struct __initdata resource omap16xx_gpio2_resources[] = {
+static struct resource omap16xx_gpio2_resources[] = {
 	{
 		.start	= OMAP1610_GPIO2_BASE,
 		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
@@ -128,7 +128,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
+static struct omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -144,7 +144,7 @@
 };
 
 /* gpio3 */
-static struct __initdata resource omap16xx_gpio3_resources[] = {
+static struct resource omap16xx_gpio3_resources[] = {
 	{
 		.start	= OMAP1610_GPIO3_BASE,
 		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
@@ -156,7 +156,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
+static struct omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -172,7 +172,7 @@
 };
 
 /* gpio4 */
-static struct __initdata resource omap16xx_gpio4_resources[] = {
+static struct resource omap16xx_gpio4_resources[] = {
 	{
 		.start	= OMAP1610_GPIO4_BASE,
 		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
@@ -184,7 +184,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
+static struct omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -199,7 +199,7 @@
 	.resource = omap16xx_gpio4_resources,
 };
 
-static struct __initdata platform_device * omap16xx_gpio_dev[] = {
+static struct platform_device *omap16xx_gpio_dev[] __initdata = {
 	&omap16xx_mpu_gpio,
 	&omap16xx_gpio1,
 	&omap16xx_gpio2,
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index f5819b2..4612d25 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -30,7 +30,7 @@
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /* mpu gpio */
-static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
+static struct resource omap7xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -53,7 +53,7 @@
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 2,
@@ -71,7 +71,7 @@
 };
 
 /* gpio1 */
-static struct __initdata resource omap7xx_gpio1_resources[] = {
+static struct resource omap7xx_gpio1_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO1_BASE,
 		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
@@ -94,7 +94,7 @@
 	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
+static struct omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -110,7 +110,7 @@
 };
 
 /* gpio2 */
-static struct __initdata resource omap7xx_gpio2_resources[] = {
+static struct resource omap7xx_gpio2_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO2_BASE,
 		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
@@ -122,7 +122,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
+static struct omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -138,7 +138,7 @@
 };
 
 /* gpio3 */
-static struct __initdata resource omap7xx_gpio3_resources[] = {
+static struct resource omap7xx_gpio3_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO3_BASE,
 		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
@@ -150,7 +150,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
+static struct omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -166,7 +166,7 @@
 };
 
 /* gpio4 */
-static struct __initdata resource omap7xx_gpio4_resources[] = {
+static struct resource omap7xx_gpio4_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO4_BASE,
 		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
@@ -178,7 +178,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
+static struct omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -194,7 +194,7 @@
 };
 
 /* gpio5 */
-static struct __initdata resource omap7xx_gpio5_resources[] = {
+static struct resource omap7xx_gpio5_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO5_BASE,
 		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
@@ -206,7 +206,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
+static struct omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -222,7 +222,7 @@
 };
 
 /* gpio6 */
-static struct __initdata resource omap7xx_gpio6_resources[] = {
+static struct resource omap7xx_gpio6_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO6_BASE,
 		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
@@ -234,7 +234,7 @@
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
+static struct omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -249,7 +249,7 @@
 	.resource = omap7xx_gpio6_resources,
 };
 
-static struct __initdata platform_device * omap7xx_gpio_dev[] = {
+static struct platform_device *omap7xx_gpio_dev[] __initdata = {
 	&omap7xx_mpu_gpio,
 	&omap7xx_gpio1,
 	&omap7xx_gpio2,
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 358b82c..40a1ae3 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -628,7 +628,6 @@
 
 static struct irqaction omap_wakeup_irq = {
 	.name		= "peripheral wakeup",
-	.flags		= IRQF_DISABLED,
 	.handler	= omap_wakeup_interrupt
 };
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 80603d2..6b5f298 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -160,7 +160,7 @@
 
 static struct irqaction omap_mpu_timer1_irq = {
 	.name		= "mpu_timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_mpu_timer1_interrupt,
 };
 
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0b74246..107e7ab 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -156,7 +156,7 @@
 
 static struct irqaction omap_32k_timer_irq = {
 	.name		= "32KHz timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_32k_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b5fb5f7..dc21df1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,7 +8,6 @@
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
-	select COMMON_CLK
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -22,7 +21,6 @@
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select SOC_HAS_OMAP2_SDRC
-	select COMMON_CLK
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
@@ -45,7 +43,6 @@
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select COMMON_CLK
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 
@@ -59,7 +56,6 @@
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
-	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
 
@@ -70,7 +66,6 @@
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
 	select MULTI_IRQ_HANDLER
-	select COMMON_CLK
 
 config SOC_AM43XX
 	bool "TI AM43x"
@@ -79,7 +74,6 @@
 	select ARCH_OMAP2PLUS
 	select MULTI_IRQ_HANDLER
 	select ARM_GIC
-	select COMMON_CLK
 	select MACH_OMAP_GENERIC
 
 config ARCH_OMAP2PLUS
@@ -89,11 +83,11 @@
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
+	select MACH_OMAP_GENERIC
 	select OMAP_DM_TIMER
 	select PINCTRL
 	select PROC_DEVICETREE if PROC_FS
@@ -187,16 +181,11 @@
 config OMAP_PACKAGE_CBP
        bool
 
-comment "OMAP Board Type"
+comment "OMAP Legacy Platform Data Board Type"
 	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
-	bool "Generic OMAP2+ board"
-	depends on ARCH_OMAP2PLUS
-	default y
-	help
-	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
-	  More information at Documentation/devicetree
+	bool
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -260,12 +249,6 @@
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP3EVM
-	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
@@ -314,33 +297,12 @@
 	select MACH_NOKIA_N810_WIMAX
 	select OMAP_PACKAGE_ZAC
 
-config MACH_NOKIA_RM680
-	bool "Nokia N950 (RM-680) / N9 (RM-696) phones"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_NOKIA_RM696
-	select OMAP_PACKAGE_CBB
-
 config MACH_NOKIA_RX51
 	bool "Nokia N900 (RX-51) phone"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP_ZOOM2
-	bool "OMAP3 Zoom2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config MACH_OMAP_ZOOM3
-	bool "OMAP3630 Zoom3 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"
 	depends on ARCH_OMAP3
@@ -357,31 +319,12 @@
 config MACH_CM_T3730
        bool
 
-config MACH_IGEP0020
-	bool "IGEP v2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_IGEP0030
-	bool "IGEP OMAP3 module"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_IGEP0020
-	select OMAP_PACKAGE_CBB
-
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CUS
 
-config MACH_OMAP_3630SDP
-	bool "OMAP3630 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-
 config MACH_TI8168EVM
 	bool "TI8168 Evaluation Module"
 	depends on SOC_TI81XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index afb457c..e15ac00 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -8,7 +8,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
-	 omap_device.o sram.o
+	 omap_device.o sram.o drm.o
 
 omap-2-3-common				= irq.o
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
@@ -112,13 +112,13 @@
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
-obj-$(CONFIG_SOC_AM43XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-prcm-4-5-common)
+obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o
@@ -146,6 +146,7 @@
 obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(powerdomain-common)
+obj-$(CONFIG_SOC_AM43XX)		+= powerdomains43xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= powerdomains54xx_data.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(powerdomain-common)
@@ -165,6 +166,7 @@
 obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(clockdomain-common)
+obj-$(CONFIG_SOC_AM43XX)		+= clockdomains43xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= clockdomains54xx_data.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(clockdomain-common)
@@ -210,6 +212,11 @@
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_43xx_interconnect_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_43xx_ipblock_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_43xx_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_33xx_43xx_interconnect_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_33xx_43xx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
 obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
@@ -228,12 +235,8 @@
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
-ifneq ($(CONFIG_DRM_OMAP),)
-obj-y					+= drm.o
-endif
-
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
@@ -242,26 +245,14 @@
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
-obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-display.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-display.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-display.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
 obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
deleted file mode 100644
index 20d6d81..0000000
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "gpmc-smc91x.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs             = 3,
-	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	board_smc91x_data.gpio_irq = 158;
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = 126,
-		.vcc_gpio = -EINVAL,
-	},
-	{
-		.port = 2,
-		.reset_gpio = 61,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-/*
- * SDP3630 CS organization
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_sdp[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "Bootloader-NOR",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "Params-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "Kernel-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "Filesystem-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
-	{
-		.name		= "X-Loader-OneNAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot Environment-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * (64 * 2048),
-	},
-	{
-		.name		= "File System-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
-		.size		= 6 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 40 * (64 * 2048),
-	},
-	{
-		.name		= "File System - NAND",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
-	},
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
-	{
-		.parts = sdp_nor_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
-	},
-	{
-		.parts = sdp_onenand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
-	},
-	{
-		.parts = sdp_nand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
-	},
-};
-
-static void __init omap_sdp_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	zoom_peripherals_init();
-	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-				  h8mbx00u0mer0em_sdrc_params);
-	zoom_display_init();
-	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
-	enable_board_wakeup_source();
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_sdp_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 87162e1..19f1652 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,13 +15,10 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include "common-board-devices.h"
-#include "dss-common.h"
 
 #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
 #define intc_of_init	NULL
@@ -36,40 +33,9 @@
 	{ }
 };
 
-/*
- * Create alias for USB host PHY clock.
- * Remove this when clock phandle can be provided via DT
- */
-static void __init legacy_init_ehci_clk(char *clkname)
-{
-	int ret;
-
-	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
-	if (ret) {
-		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
-						__func__, clkname, ret);
-	}
-}
-
 static void __init omap_generic_init(void)
 {
-	omap_sdrc_init(NULL, NULL);
-
-	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
-
-	/*
-	 * HACK: call display setup code for selected boards to enable omapdss.
-	 * This will be removed when omapdss supports DT.
-	 */
-	if (of_machine_is_compatible("ti,omap4-panda")) {
-		omap4_panda_display_init_of();
-		legacy_init_ehci_clk("auxclk3_ck");
-
-	}
-	else if (of_machine_is_compatible("ti,omap4-sdp"))
-		omap_4430sdp_display_init_of();
-	else if (of_machine_is_compatible("ti,omap5-uevm"))
-		legacy_init_ehci_clk("auxclk1_ck");
+	pdata_quirks_init(omap_dt_match_table);
 }
 
 #ifdef CONFIG_SOC_OMAP2420
@@ -180,6 +146,7 @@
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= am33xx_init_late,
 	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
 	.restart	= am33xx_restart,
@@ -219,6 +186,7 @@
 	.init_early	= omap5_init_early,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap5_init_late,
 	.init_time	= omap5_realtime_timer_init,
 	.dt_compat	= omap5_boards_compat,
 	.restart	= omap44xx_restart,
@@ -234,6 +202,7 @@
 DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.map_io		= am33xx_map_io,
 	.init_early	= am43xx_init_early,
+	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
 	.init_time	= omap3_sync32k_timer_init,
@@ -252,6 +221,7 @@
 	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap5_map_io,
 	.init_early	= dra7xx_init_early,
+	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
 	.init_time	= omap5_realtime_timer_init,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
deleted file mode 100644
index 06dbb2d..0000000
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/*
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * Modified from mach-omap2/board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/usb/phy.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "sdram-numonyx-m65kxxxxam.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-#include "control.h"
-#include "gpmc-onenand.h"
-
-#define IGEP2_SMSC911X_CS       5
-#define IGEP2_SMSC911X_GPIO     176
-#define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_GREEN   26
-#define IGEP2_GPIO_LED0_RED     27
-#define IGEP2_GPIO_LED1_RED     28
-#define IGEP2_GPIO_DVI_PUP      170
-
-#define IGEP2_RB_GPIO_WIFI_NPD     94
-#define IGEP2_RB_GPIO_WIFI_NRESET  95
-#define IGEP2_RB_GPIO_BT_NRESET    137
-#define IGEP2_RC_GPIO_WIFI_NPD     138
-#define IGEP2_RC_GPIO_WIFI_NRESET  139
-#define IGEP2_RC_GPIO_BT_NRESET    137
-
-#define IGEP3_GPIO_LED0_GREEN	54
-#define IGEP3_GPIO_LED0_RED	53
-#define IGEP3_GPIO_LED1_RED	16
-#define IGEP3_GPIO_USBH_NRESET  183
-
-#define IGEP_SYSBOOT_MASK           0x1f
-#define IGEP_SYSBOOT_NAND           0x0f
-#define IGEP_SYSBOOT_ONENAND        0x10
-
-/*
- * IGEP2 Hardware Revision Table
- *
- *  --------------------------------------------------------------------------
- * | Id. | Hw Rev.            | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
- *  --------------------------------------------------------------------------
- * |  0  | B                  |   high   |  gpio94  |   gpio95    |     -     |
- * |  0  | B/C (B-compatible) |   high   |  gpio94  |   gpio95    |  gpio137  |
- * |  1  | C                  |   low    |  gpio138 |   gpio139   |  gpio137  |
- *  --------------------------------------------------------------------------
- */
-
-#define IGEP2_BOARD_HWREV_B	0
-#define IGEP2_BOARD_HWREV_C	1
-#define IGEP3_BOARD_HWREV	2
-
-static u8 hwrev;
-
-static void __init igep2_get_revision(void)
-{
-	u8 ret;
-
-	if (machine_is_igep0030()) {
-		hwrev = IGEP3_BOARD_HWREV;
-		return;
-	}
-
-	omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
-
-	if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
-		pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		return;
-	}
-
-	ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
-	if (ret == 0) {
-		pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_C;
-	} else if (ret ==  1) {
-		pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_B;
-	} else {
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		hwrev = -1;
-	}
-
-	gpio_free(IGEP2_GPIO_LED1_RED);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
-	defined(CONFIG_MTD_NAND_OMAP2) ||		\
-	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-#define ONENAND_MAP             0x20000000
-
-/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
- * Since the device is equipped with two DataRAMs, and two-plane NAND
- * Flash memory array, these two component enables simultaneous program
- * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
- * while Plane2 has only odd blocks such as block1, block3, block5.
- * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
- */
-
-static struct mtd_partition igep_flash_partitions[] = {
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 2 * (64*(2*2048))
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 6 * (64*(2*2048)),
-	},
-	{
-		.name           = "Environment",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2 * (64*(2*2048)),
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 12 * (64*(2*2048)),
-	},
-	{
-		.name           = "File System",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static inline u32 igep_get_sysboot_value(void)
-{
-	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
-}
-
-static void __init igep_flash_init(void)
-{
-	u32 mux;
-	mux = igep_get_sysboot_value();
-
-	if (mux == IGEP_SYSBOOT_NAND) {
-		pr_info("IGEP: initializing NAND memory device\n");
-		board_nand_init(igep_flash_partitions,
-				ARRAY_SIZE(igep_flash_partitions),
-				0, NAND_BUSWIDTH_16, nand_default_timings);
-	} else if (mux == IGEP_SYSBOOT_ONENAND) {
-		pr_info("IGEP: initializing OneNAND memory device\n");
-		board_onenand_init(igep_flash_partitions,
-				   ARRAY_SIZE(igep_flash_partitions), 0);
-	} else {
-		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
-	}
-}
-
-#else
-static void __init igep_flash_init(void) {}
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = IGEP2_SMSC911X_CS,
-	.gpio_irq       = IGEP2_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init igep2_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init igep2_init_smsc911x(void) { }
-#endif
-
-static struct regulator_consumer_supply igep_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data igep_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
-	.consumer_supplies      = igep_vmmc1_supply,
-};
-
-static struct regulator_consumer_supply igep_vio_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= 1,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
-	.consumer_supplies      = igep_vio_supply,
-};
-
-static struct regulator_consumer_supply igep_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vmmc2 = {
-	.constraints		= {
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.always_on		= 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
-	.consumer_supplies	= igep_vmmc2_supply,
-};
-
-static struct fixed_voltage_config igep_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 3300000,
-	.gpio			= -EINVAL,
-	.enabled_at_boot	= 1,
-	.init_data		= &igep_vmmc2,
-};
-
-static struct platform_device igep_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &igep_vwlan,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-#endif
-	{}      /* Terminator */
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep_gpio_leds[] = {
-	[0] = {
-		.name			= "omap3:red:user0",
-		.default_state		= 0,
-	},
-	[1] = {
-		.name			= "omap3:green:boot",
-		.default_state		= 1,
-	},
-	[2] = {
-		.name			= "omap3:red:user1",
-		.default_state		= 0,
-	},
-	[3] = {
-		.name			= "omap3:green:user1",
-		.default_state		= 0,
-		.gpio			= -EINVAL, /* gets replaced */
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data igep_led_pdata = {
-	.leds           = igep_gpio_leds,
-	.num_leds       = ARRAY_SIZE(igep_gpio_leds),
-};
-
-static struct platform_device igep_led_device = {
-	 .name   = "leds-gpio",
-	 .id     = -1,
-	 .dev    = {
-		 .platform_data  =  &igep_led_pdata,
-	},
-};
-
-static void __init igep_leds_init(void)
-{
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	platform_device_register(&igep_led_device);
-}
-
-#else
-static struct gpio igep_gpio_leds[] __initdata = {
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d0"   },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d1"   },
-};
-
-static inline void igep_leds_init(void)
-{
-	int i;
-
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
-		pr_warning("IGEP v2: Could not obtain leds gpios\n");
-		return;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
-		gpio_export(igep_gpio_leds[i].gpio, 0);
-}
-#endif
-
-static struct gpio igep2_twl_gpios[] = {
-	{ -EINVAL, GPIOF_IN,		"GPIO_EHCI_NOC"  },
-	{ -EINVAL, GPIOF_OUT_INIT_LOW,	"GPIO_USBH_CPEN" },
-};
-
-static int igep_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
-	ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
-			       "gpio-led:green:d1");
-	if (ret == 0)
-		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
-	else
-		pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
-#else
-	igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	if (machine_is_igep0030())
-		return 0;
-
-	/*
-	 * REVISIT: need ehci-omap hooks for external VBUS
-	 * power switch and overcurrent detect
-	 */
-	igep2_twl_gpios[0].gpio = gpio + 1;
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
-	igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
-
-	ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
-	if (ret < 0)
-		pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
-
-	return 0;
-};
-
-static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.use_leds	= true,
-	.setup		= igep_twl_gpio_setup,
-};
-
-static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
-};
-
-static struct platform_device omap3stalker_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap3stalker_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = IGEP2_GPIO_DVI_PUP,
-};
-
-static struct platform_device omap3stalker_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap3stalker_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
-	.default_display_name = "dvi",
-};
-
-static struct platform_device *igep_devices[] __initdata = {
-	&igep_vwlan_device,
-	&omap3stalker_tfp410_device,
-	&omap3stalker_dvi_connector_device,
-};
-
-static int igep2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data igep2_keymap_data = {
-	.keymap			= igep2_keymap,
-	.keymap_size		= ARRAY_SIZE(igep2_keymap),
-};
-
-static struct twl4030_keypad_data igep2_keypad_pdata = {
-	.keymap_data	= &igep2_keymap_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-static struct twl4030_platform_data igep_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &igep_twl4030_gpio_pdata,
-	.vmmc1          = &igep_vmmc1,
-	.vio		= &igep_vio,
-};
-
-static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("eeprom", 0x50),
-	},
-};
-
-static void __init igep_i2c_init(void)
-{
-	int ret;
-
-	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
-			      TWL_COMMON_REGULATOR_VPLL2);
-	igep_twldata.vpll2->constraints.apply_uV = true;
-	igep_twldata.vpll2->constraints.name = "VDVI";
-
-	if (machine_is_igep0020()) {
-		/*
-		 * Bus 3 is attached to the DVI port where devices like the
-		 * pico DLP projector don't work reliably with 400kHz
-		 */
-		ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
-					    ARRAY_SIZE(igep2_i2c3_boardinfo));
-		if (ret)
-			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
-
-		igep_twldata.keypad	= &igep2_keypad_pdata;
-		/* Get common pmic data */
-		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
-	}
-
-	omap3_pmic_init("twl4030", &igep_twldata);
-}
-
-static struct usbhs_phy_data igep2_phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = IGEP2_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_phy_data igep3_phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = IGEP3_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* Display Sub System */
-	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	/* TFP410 PanelBus DVI Transmitte (GPIO_170) */
-	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
-	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-static struct gpio igep_wlan_bt_gpios[] __initdata = {
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD"	   },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET"   },
-};
-
-static void __init igep_wlan_bt_init(void)
-{
-	int err;
-
-	/* GPIO's for WLAN-BT combo depends on hardware revision */
-	if (hwrev == IGEP2_BOARD_HWREV_B) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
-	} else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
-	} else
-		return;
-
-	/* Make sure that the GPIO pins are muxed correctly */
-	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
-
-	err = gpio_request_array(igep_wlan_bt_gpios,
-				 ARRAY_SIZE(igep_wlan_bt_gpios));
-	if (err) {
-		pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
-		return;
-	}
-
-	gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
-
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
-
-}
-#else
-static inline void __init igep_wlan_bt_init(void) { }
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init igep_init(void)
-{
-	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	/* Get IGEP2 hardware revision */
-	igep2_get_revision();
-
-	omap_hsmmc_init(mmc);
-
-	/* Register I2C busses and drivers */
-	igep_i2c_init();
-	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
-	omap_serial_init();
-	omap_sdrc_init(m65kxxxxam_sdrc_params,
-				  m65kxxxxam_sdrc_params);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	igep_flash_init();
-	igep_leds_init();
-	omap_twl4030_audio_init("igep2", NULL);
-
-	/*
-	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
-	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
-	 */
-	igep_wlan_bt_init();
-
-	if (machine_is_igep0020()) {
-		omap_display_init(&igep2_dss_data);
-		igep2_init_smsc911x();
-		usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
-		usbhs_init(&igep2_usbhs_bdata);
-	} else {
-		usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
-		usbhs_init(&igep3_usbhs_bdata);
-	}
-}
-
-MACHINE_START(IGEP0020, "IGEP v2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(IGEP0030, "IGEP OMAP3 module")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index dd8da2c..4ec8d82 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -36,7 +36,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include "board-zoom.h"
 #include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
@@ -406,7 +405,7 @@
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-			ZOOM_NAND_CS, 0, nand_default_timings);
+			0, 0, nand_default_timings);
 
 	omap_hsmmc_init(mmc);
 	ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f269184..8b9cd06 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -289,18 +289,12 @@
 
 static struct gpio_led gpio_leds[];
 
-/* PHY's VCC regulator might be added later, so flag that we need it */
-static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = {
-	.needs_vcc = true,
-};
-
 static struct usbhs_phy_data phy_data[] = {
 	{
 		.port = 2,
 		.reset_gpio = 147,
 		.vcc_gpio = -1,		/* updated in beagle_twl_gpio_setup */
 		.vcc_polarity = 1,	/* updated in beagle_twl_gpio_setup */
-		.platform_data = &hsusb2_phy_data,
 	},
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
deleted file mode 100644
index 1814387..0000000
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3evm.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/leds.h>
-#include <linux/interrupt.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/i2c/twl.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/musb.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
-#include <linux/smsc911x.h>
-
-#include <linux/wl12xx.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include "common.h"
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-
-#define	NAND_CS			0
-
-#define OMAP3_EVM_TS_GPIO	175
-#define OMAP3_EVM_EHCI_VBUS	22
-#define OMAP3_EVM_EHCI_SELECT	61
-
-#define OMAP3EVM_ETHR_START	0x2c000000
-#define OMAP3EVM_ETHR_SIZE	1024
-#define OMAP3EVM_ETHR_ID_REV	0x50
-#define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMSC911X_CS	5
-/*
- * Eth Reset signal
- *	64 = Generation 1 (<=RevD)
- *	7 = Generation 2 (>=RevE)
- */
-#define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
-#define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *	GEN_1	= 0x01150000
- *	GEN_2	= 0x92200000
- */
-enum {
-	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
-	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
-};
-
-static u8 omap3_evm_version;
-
-static u8 get_omap3_evm_rev(void)
-{
-	return omap3_evm_version;
-}
-
-static void __init omap3_evm_get_revision(void)
-{
-	void __iomem *ioaddr;
-	unsigned int smsc_id;
-
-	/* Ethernet PHY ID is stored at ID_REV register */
-	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
-	if (!ioaddr)
-		return;
-	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
-	iounmap(ioaddr);
-
-	switch (smsc_id) {
-	/*SMSC9115 chipset*/
-	case 0x01150000:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
-		break;
-	/*SMSC 9220 chipset*/
-	case 0x92200000:
-	default:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
-	}
-}
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = OMAP3EVM_SMSC911X_CS,
-	.gpio_irq       = OMAP3EVM_ETHR_GPIO_IRQ,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init omap3evm_init_smsc911x(void)
-{
-	/* Configure ethernet controller reset gpio */
-	if (cpu_is_omap3430()) {
-		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
-		else
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
-	}
-
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init omap3evm_init_smsc911x(void) { return; }
-#endif
-
-/*
- * OMAP3EVM LCD Panel control signals
- */
-#define OMAP3EVM_LCD_PANEL_LR		2
-#define OMAP3EVM_LCD_PANEL_UD		3
-#define OMAP3EVM_LCD_PANEL_INI		152
-#define OMAP3EVM_LCD_PANEL_QVGA		154
-#define OMAP3EVM_LCD_PANEL_RESB		155
-
-#define OMAP3EVM_LCD_PANEL_ENVDD	153
-#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
-
-/*
- * OMAP3EVM DVI control signals
- */
-#define OMAP3EVM_DVI_PANEL_EN_GPIO	199
-
-#ifdef CONFIG_BROKEN
-static void __init omap3_evm_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,
-				"lcd_panel_envdd");
-	if (r)
-		pr_err("failed to get lcd_panel_envdd GPIO\n");
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO,
-				GPIOF_OUT_INIT_LOW, "lcd_panel_bklight");
-	if (r)
-		pr_err("failed to get lcd_panel_bklight GPIO\n");
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-	else
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-}
-#endif
-
-static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.resb_gpio		= OMAP3EVM_LCD_PANEL_RESB,
-	.ini_gpio		= OMAP3EVM_LCD_PANEL_INI,
-	.mo_gpio		= OMAP3EVM_LCD_PANEL_QVGA,
-	.lr_gpio		= OMAP3EVM_LCD_PANEL_LR,
-	.ud_gpio		= OMAP3EVM_LCD_PANEL_UD,
-};
-
-static struct platform_device omap3_evm_lcd_device = {
-	.name                   = "panel-sharp-ls037v7dw01",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device omap3_evm_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = OMAP3EVM_DVI_PANEL_EN_GPIO,
-};
-
-static struct platform_device omap3_evm_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data omap3_evm_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device omap3_evm_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_tv_pdata,
-};
-
-static struct omap_dss_board_info omap3_evm_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3evm_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
-	.consumer_supplies	= omap3evm_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3evm_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
-	.consumer_supplies	= omap3evm_vsim_supply,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 63,
-		.deferred	= true,
-	},
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	{
-		.name		= "wl1271",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-#endif
-	{}	/* Terminator */
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "omap3evm::ledb",
-		/* normally not visible (board underside) */
-		.default_trigger	= "default-on",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-
-static int omap3evm_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int r, lcd_bl_en;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * Most GPIOs are for USB OTG.  Some are mostly sent to
-	 * the P2 connector; notably LEDA for the LCD backlight.
-	 */
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
-	lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ?
-		GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL");
-	if (r)
-		printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
-
-	/* gpio + 7 == DVI Enable */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	platform_device_register(&leds_gpio);
-
-	/* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
-	 * for starting USB tranceiver
-	 */
-#ifdef CONFIG_TWL4030_CORE
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		u8 val;
-
-		twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
-		val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
-		twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
-	}
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.use_leds	= true,
-	.setup		= omap3evm_twl_gpio_setup,
-};
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_ENTER),
-	KEY(0, 3, KEY_M),
-
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_I),
-	KEY(1, 3, KEY_N),
-
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_E),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_O),
-
-	KEY(3, 0, KEY_B),
-	KEY(3, 1, KEY_F),
-	KEY(3, 2, KEY_K),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data omap3evm_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VIO for ads7846 */
-static struct regulator_init_data omap3evm_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
-	.consumer_supplies	= omap3evm_vio_supply,
-};
-
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-
-#define OMAP3EVM_WLAN_PMENA_GPIO	(150)
-#define OMAP3EVM_WLAN_IRQ_GPIO		(149)
-
-static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* VMMC2 for driving the WL12xx module */
-static struct regulator_init_data omap3evm_vmmc2 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply),
-	.consumer_supplies	= omap3evm_vmmc2_supply,
-};
-
-static struct fixed_voltage_config omap3evm_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.80V */
-	.gpio			= OMAP3EVM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &omap3evm_vmmc2,
-};
-
-static struct platform_device omap3evm_wlan_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &omap3evm_vwlan,
-	},
-};
-
-struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
-};
-#endif
-
-/* VAUX2 for USB */
-static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
-	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"),	/* hsusb port 2 */
-	REGULATOR_SUPPLY("vaux2", NULL),
-};
-
-static struct regulator_init_data omap3evm_vaux2 = {
-	.constraints = {
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3evm_vaux2_supplies),
-	.consumer_supplies		= omap3evm_vaux2_supplies,
-};
-
-static struct twl4030_platform_data omap3evm_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &omap3evm_kp_data,
-	.gpio		= &omap3evm_gpio_data,
-	.vio		= &omap3evm_vio,
-	.vmmc1		= &omap3evm_vmmc1,
-	.vsim		= &omap3evm_vsim,
-};
-
-static int __init omap3_evm_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3evm_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3evm_twldata.vdac->constraints.apply_uV = true;
-	omap3evm_twldata.vpll2->constraints.apply_uV = true;
-
-	omap3_pmic_init("twl4030", &omap3evm_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = -1,	/* set at runtime */
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux omap35x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_board_mux omap36x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap35x_board_mux	NULL
-#define omap36x_board_mux	NULL
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct gpio omap3_evm_ehci_gpios[] __initdata = {
-	{ OMAP3_EVM_EHCI_VBUS,	 GPIOF_OUT_INIT_HIGH,  "enable EHCI VBUS" },
-	{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW,   "select EHCI port" },
-};
-
-static void __init omap3_evm_wl12xx_init(void)
-{
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	int ret;
-
-	/* WL12xx WLAN Init */
-	omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-	ret = platform_device_register(&omap3evm_wlan_regulator);
-	if (ret)
-		pr_err("error registering wl12xx device: %d\n", ret);
-#endif
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct mtd_partition omap3evm_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 4*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 14*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot Env",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2*(SZ_128K)
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 40*(SZ_128K)
-	},
-	{
-		.name           = "File system",
-		.size           = MTDPART_SIZ_FULL,
-		.offset         = MTDPART_OFS_APPEND,
-	},
-};
-
-static void __init omap3_evm_init(void)
-{
-	struct omap_board_mux *obm;
-
-	omap3_evm_get_revision();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
-	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
-
-	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
-	omap_hsmmc_init(mmc);
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		omap3evm_twldata.vaux2 = &omap3evm_vaux2;
-
-	omap3_evm_i2c_init();
-
-	omap_display_init(&omap3_evm_dss_data);
-	platform_device_register(&omap3_evm_lcd_device);
-	platform_device_register(&omap3_evm_tfp410_device);
-	platform_device_register(&omap3_evm_dvi_connector_device);
-	platform_device_register(&omap3_evm_tv_connector_device);
-
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
-
-	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
-	usb_nop_xceiv_register();
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		/* enable EHCI VBUS using GPIO22 */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
-		/* Select EHCI port on main board */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
-				   OMAP_PIN_INPUT_PULLUP);
-		gpio_request_array(omap3_evm_ehci_gpios,
-				   ARRAY_SIZE(omap3_evm_ehci_gpios));
-
-		/* setup EHCI phy reset config */
-		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		phy_data[0].reset_gpio = 21;
-
-		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
-		musb_board_data.power = 500;
-		musb_board_data.extvbus = 1;
-	} else {
-		/* setup EHCI phy reset on MDC */
-		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		phy_data[0].reset_gpio = 135;
-	}
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(&musb_board_data);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	board_nand_init(omap3evm_nand_partitions,
-			ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
-			NAND_BUSWIDTH_16, NULL);
-
-	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
-	omap3evm_init_smsc911x();
-#ifdef CONFIG_BROKEN
-	omap3_evm_display_init();
-#endif
-	omap3_evm_wl12xx_init();
-	omap_twl4030_audio_init("omap3evm", NULL);
-}
-
-MACHINE_START(OMAP3EVM, "OMAP3 EVM")
-	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_evm_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
deleted file mode 100644
index 345e8c4..0000000
--- a/arch/arm/mach-omap2/board-rm680.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Board support file for Nokia N950 (RM-680) / N9 (RM-696).
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c/twl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "mux.h"
-#include "gpmc.h"
-#include "mmc.h"
-#include "hsmmc.h"
-#include "sdram-nokia.h"
-#include "common-board-devices.h"
-#include "gpmc-onenand.h"
-
-static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* Fixed regulator for internal eMMC */
-static struct regulator_init_data rm680_vemmc = {
-	.constraints =	{
-		.name			= "rm680_vemmc",
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS
-					| REGULATOR_CHANGE_MODE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(rm680_vemmc_consumers),
-	.consumer_supplies		= rm680_vemmc_consumers,
-};
-
-static struct fixed_voltage_config rm680_vemmc_config = {
-	.supply_name		= "VEMMC",
-	.microvolts		= 2900000,
-	.gpio			= 157,
-	.startup_delay		= 150,
-	.enable_high		= 1,
-	.init_data		= &rm680_vemmc,
-};
-
-static struct platform_device rm680_vemmc_device = {
-	.name			= "reg-fixed-voltage",
-	.dev			= {
-		.platform_data	= &rm680_vemmc_config,
-	},
-};
-
-static struct platform_device *rm680_peripherals_devices[] __initdata = {
-	&rm680_vemmc_device,
-};
-
-/* TWL */
-static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.pullups		= BIT(0),
-	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
-};
-
-static struct twl4030_platform_data rm680_twl_data = {
-	.gpio			= &rm680_gpio_data,
-	/* add rest of the children here */
-};
-
-static void __init rm680_i2c_init(void)
-{
-	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.gpio_irq	= 65,
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-/* eMMC */
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{ /* Terminator */ }
-};
-
-static void __init rm680_peripherals_init(void)
-{
-	platform_add_devices(rm680_peripherals_devices,
-				ARRAY_SIZE(rm680_peripherals_devices));
-	rm680_i2c_init();
-	gpmc_onenand_init(board_onenand_data);
-	omap_hsmmc_init(mmc);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init rm680_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	rm680_peripherals_init();
-}
-
-MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f6fe388..5c0d0e1 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -57,6 +57,8 @@
 #include "common-board-devices.h"
 #include "gpmc.h"
 #include "gpmc-onenand.h"
+#include "soc.h"
+#include "omap-secure.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
@@ -1298,6 +1300,22 @@
 	platform_device_register(&madc_hwmon);
 }
 
+static struct platform_device omap3_rom_rng_device = {
+	.name		= "omap3-rom-rng",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= rx51_secure_rng_call,
+	},
+};
+
+static void __init rx51_init_omap3_rom_rng(void)
+{
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		platform_device_register(&omap3_rom_rng_device);
+	}
+}
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
@@ -1318,5 +1336,6 @@
 
 	rx51_charger_init();
 	rx51_init_twl4030_hwmon();
+	rx51_init_omap3_rom_rng();
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 773510556..db168c9 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -2,6 +2,8 @@
  * Board support file for Nokia N900 (aka RX-51).
  *
  * Copyright (C) 2007, 2008 Nokia
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -31,7 +33,9 @@
 #include "mux.h"
 #include "gpmc.h"
 #include "pm.h"
+#include "soc.h"
 #include "sdram-nokia.h"
+#include "omap-secure.h"
 
 #define RX51_GPIO_SLEEP_IND 162
 
@@ -103,6 +107,14 @@
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+#ifdef CONFIG_ARM_ERRATA_430973
+		pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+		/* set IBE to 1 */
+		rx51_secure_update_aux_cr(BIT(6), 0);
+#endif
+	}
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
deleted file mode 100644
index 42e5f23..0000000
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include "board-zoom.h"
-
-#include "soc.h"
-#include "common.h"
-
-#define ZOOM_SMSC911X_CS	7
-#define ZOOM_SMSC911X_GPIO	158
-#define ZOOM_QUADUART_CS	3
-#define ZOOM_QUADUART_GPIO	102
-#define ZOOM_QUADUART_RST_GPIO	152
-#define QUART_CLK		1843200
-#define DEBUG_BASE		0x08000000
-#define ZOOM_ETHR_START	DEBUG_BASE
-
-static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = {
-	.cs             = ZOOM_SMSC911X_CS,
-	.gpio_irq       = ZOOM_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init zoom_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&zoom_smsc911x_cfg);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= ZOOM_UART_BASE,
-		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
-		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= QUART_CLK,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device zoom_debugboard_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static inline void __init zoom_init_quaduart(void)
-{
-	int quart_cs;
-	unsigned long cs_mem_base;
-	int quart_gpio = 0;
-
-	if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
-				GPIOF_OUT_INIT_LOW,
-				"TL16CP754C GPIO") < 0) {
-		pr_err("Failed to request GPIO%d for TL16CP754C\n",
-			ZOOM_QUADUART_RST_GPIO);
-		return;
-	}
-
-	quart_cs = ZOOM_QUADUART_CS;
-
-	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
-		return;
-	}
-
-	quart_gpio = ZOOM_QUADUART_GPIO;
-
-	if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
-		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
-								quart_gpio);
-
-	serial_platform_data[0].irq = gpio_to_irq(102);
-}
-
-static inline int omap_zoom_debugboard_detect(void)
-{
-	int debug_board_detect = 0;
-	int ret = 1;
-
-	debug_board_detect = ZOOM_SMSC911X_GPIO;
-
-	if (gpio_request_one(debug_board_detect, GPIOF_IN,
-			     "Zoom debug board detect") < 0) {
-		pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
-		       debug_board_detect);
-		return 0;
-	}
-
-	if (!gpio_get_value(debug_board_detect)) {
-		ret = 0;
-	}
-	gpio_free(debug_board_detect);
-	return ret;
-}
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&zoom_debugboard_serial_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-int __init zoom_debugboard_init(void)
-{
-	if (!omap_zoom_debugboard_detect())
-		return 0;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	zoom_init_smsc911x();
-	zoom_init_quaduart();
-	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
deleted file mode 100644
index 3d8ecc1e..0000000
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom-peripherals.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "board-zoom.h"
-#include "soc.h"
-#include "common.h"
-
-#define LCD_PANEL_RESET_GPIO_PROD	96
-#define LCD_PANEL_RESET_GPIO_PILOT	55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static struct panel_nec_nl8048hl11_platform_data zoom_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.res_gpio		= -1,	/* filled in code */
-	.qvga_gpio		= LCD_PANEL_QVGA_GPIO,
-};
-
-static struct omap_dss_board_info zoom_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init zoom_lcd_panel_init(void)
-{
-	zoom_lcd_pdata.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
-			LCD_PANEL_RESET_GPIO_PROD :
-			LCD_PANEL_RESET_GPIO_PILOT;
-}
-
-static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
-	.turbo_mode		= 1,
-};
-
-static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias		= "panel-nec-nl8048hl11",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 375000,
-		.controller_data	= &dss_lcd_mcspi_config,
-		.platform_data		= &zoom_lcd_pdata,
-	},
-};
-
-void __init zoom_display_init(void)
-{
-	omap_display_init(&zoom_dss_data);
-	zoom_lcd_panel_init();
-	spi_register_board_info(nec_8048_spi_board_info,
-				ARRAY_SIZE(nec_8048_spi_board_info));
-}
-
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
deleted file mode 100644
index a90375d..0000000
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom2.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/wl12xx.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/omap-twl4030.h>
-#include <linux/usb/phy.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-#include "board-zoom.h"
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define OMAP_ZOOM_WLAN_PMENA_GPIO	(101)
-#define OMAP_ZOOM_TSC2004_IRQ_GPIO	(153)
-#define OMAP_ZOOM_WLAN_IRQ_GPIO		(162)
-
-/* Zoom2 has Qwerty keyboard*/
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 4, KEY_UNKNOWN),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_RIGHT),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_UP),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 6, KEY_SELECT),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc1_supply),
-	.consumer_supplies      = zoom_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc2_supply),
-	.consumer_supplies      = zoom_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vsim_supply),
-	.consumer_supplies      = zoom_vsim_supply,
-};
-
-static struct regulator_init_data zoom_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(zoom_vmmc3_supply),
-	.consumer_supplies	= zoom_vmmc3_supply,
-};
-
-static struct fixed_voltage_config zoom_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= OMAP_ZOOM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70msec */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &zoom_vmmc3,
-};
-
-static struct platform_device omap_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &zoom_vwlan,
-	},
-};
-
-static struct pwm_lookup zoom_pwm_lookup[] = {
-	PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"),
-	PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"),
-};
-
-static struct led_pwm zoom_pwm_leds[] = {
-	{
-		.name		= "zoom::keypad",
-		.max_brightness	= 127,
-		.pwm_period_ns	= 7812500,
-	},
-};
-
-static struct led_pwm_platform_data zoom_pwm_data = {
-	.num_leds	= ARRAY_SIZE(zoom_pwm_leds),
-	.leds		= zoom_pwm_leds,
-};
-
-static struct platform_device zoom_leds_pwm = {
-	.name	= "leds_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &zoom_pwm_data,
-	},
-};
-
-static struct platform_pwm_backlight_data zoom_backlight_data = {
-	.pwm_id = 1,
-	.max_brightness = 127,
-	.dft_brightness = 127,
-	.pwm_period_ns = 7812500,
-};
-
-static struct platform_device zoom_backlight_pwm = {
-	.name   = "pwm-backlight",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &zoom_backlight_data,
-	},
-};
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&omap_vwlan_device,
-	&zoom_leds_pwm,
-	&zoom_backlight_pwm,
-};
-
-static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-		.power_saving	= true,
-		.deferred	= true,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.power_saving	= true,
-	},
-	{
-		.name		= "wl1271",
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-	{}      /* Terminator */
-};
-
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
-	.voice_connected = true,
-	.custom_routing	= true,
-
-	.has_hs		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-	.has_hf		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-
-	.has_mainmic	= true,
-	.has_submic	= true,
-	.has_hsmic	= true,
-	.has_linein	= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
-
-static int zoom_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* Audio setup */
-	omap_twl4030_audio_data.jack_detect = gpio + 2;
-	omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.setup		= zoom_twl_gpio_setup,
-};
-
-static struct twl4030_platform_data zoom_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &zoom_gpio_data,
-	.keypad		= &zoom_kp_twl4030_data,
-	.vmmc1          = &zoom_vmmc1,
-	.vmmc2          = &zoom_vmmc2,
-	.vsim           = &zoom_vsim,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&zoom_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
-			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	if (machine_is_omap_zoom2())
-		zoom_twldata.audio->codec->ramp_delay_value = 3; /* 161 ms */
-
-	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-void __init zoom_peripherals_init(void)
-{
-	int ret;
-
-	omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
-
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-
-	omap_hsmmc_init(mmc);
-	omap_i2c_init();
-	pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup));
-	platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	enable_board_wakeup_source();
-	omap_serial_init();
-}
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
deleted file mode 100644
index 1a3dd86..0000000
--- a/arch/arm/mach-omap2/board-zoom.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- * Felipe Balbi <balbi@ti.com>
- *
- * Modified from mach-omap2/board-ldp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#define ZOOM3_EHCI_RESET_GPIO		64
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* WLAN POWER ENABLE - GPIO 101 */
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC3 CMD */
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 CLK */
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 DAT[0-3] */
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition zoom_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "system",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
-	},
-	{
-		.name		= "userdata",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-	{
-		.name		= "cache",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = ZOOM3_EHCI_RESET_GPIO,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void __init omap_zoom_init(void)
-{
-	if (machine_is_omap_zoom2()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	} else if (machine_is_omap_zoom3()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-
-		usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-		usbhs_init(&usbhs_bdata);
-	}
-
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
-			NAND_BUSWIDTH_16, nand_default_timings);
-	zoom_debugboard_init();
-	zoom_peripherals_init();
-
-	if (machine_is_omap_zoom2())
-		omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-					  mt46h32m32lf6_sdrc_params);
-	else if (machine_is_omap_zoom3())
-		omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-					  h8mbx00u0mer0em_sdrc_params);
-
-	zoom_display_init();
-}
-
-MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h
deleted file mode 100644
index 2e94869..0000000
--- a/arch/arm/mach-omap2/board-zoom.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Defines for zoom boards
- */
-#include <video/omapdss.h>
-
-#define ZOOM_NAND_CS    0
-
-extern int __init zoom_debugboard_init(void);
-extern void __init zoom_peripherals_init(void);
-extern void __init zoom_display_init(void);
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 334b767..03a2829 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -3275,6 +3275,7 @@
 static struct omap_clk omap34xx_omap36xx_clks[] = {
 	CLK(NULL,	"aes1_ick",	&aes1_ick),
 	CLK("omap_rng",	"ick",		&rng_ick),
+	CLK("omap3-rom-rng",	"ick",	&rng_ick),
 	CLK(NULL,	"sha11_ick",	&sha11_ick),
 	CLK(NULL,	"des1_ick",	&des1_ick),
 	CLK(NULL,	"cam_mclk",	&cam_mclk),
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index 25b1fee..c78e893 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -52,7 +52,7 @@
 
 	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
 
-	r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	r = omap2xxx_cm_get_pll_status();
 
 	return ((r & apll_mask) == apll_mask) ? true : false;
 }
@@ -126,7 +126,7 @@
 {
 	u32 aplls, srate = 0;
 
-	aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls = omap2xxx_cm_get_pll_config();
 	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
 	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
 
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index d862010..3ff3254 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -60,8 +60,7 @@
 
 	core_clk = omap2_get_dpll_rate(dpll_core_ck);
 
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+	v = omap2xxx_cm_get_core_clk_src();
 
 	if (v == CORE_CLK_SRC_32K)
 		core_clk = 32768;
@@ -79,8 +78,7 @@
 {
 	u32 high, low, core_clk_src;
 
-	core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+	core_clk_src = omap2xxx_cm_get_core_clk_src();
 
 	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
 		high = curr_prcm_set->dpll_speed * 2;
@@ -120,8 +118,7 @@
 	const struct dpll_data *dd;
 
 	cur_rate = omap2xxx_clk_get_core_rate();
-	mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+	mult = omap2xxx_cm_get_core_clk_src();
 
 	if ((rate == (cur_rate / 2)) && (mult == 2)) {
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -145,7 +142,7 @@
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
 					   dd->div1_mask);
 		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config();
 		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
 		if (rate > low) {
 			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index ae2b35e..b935ed2 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -98,7 +98,7 @@
 int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
 			    unsigned long parent_rate)
 {
-	u32 cur_rate, done_rate, bypass = 0, tmp;
+	u32 cur_rate, done_rate, bypass = 0;
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
@@ -141,23 +141,11 @@
 		else
 			done_rate = CORE_CLK_SRC_DPLL;
 
-		/* MPU divider */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			omap2_cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
+		omap2xxx_cm_set_mod_dividers(prcm->cm_clksel_mpu,
+					     prcm->cm_clksel_dsp,
+					     prcm->cm_clksel_gfx,
+					     prcm->cm_clksel1_core,
+					     prcm->cm_clksel_mdm);
 
 		/* x2 to enter omap2xxx_sdrc_init_params() */
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 0c38ca9..c7c5d31 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -543,6 +543,44 @@
 }
 
 /**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->deny_idle)
+		c->ops->deny_idle(c);
+	return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->allow_idle)
+		c->ops->allow_idle(c);
+	return 0;
+}
+
+/**
  * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
  * @clk_names: ptr to an array of strings of clock names to enable
  * @num_clocks: number of clock names in @clk_names
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 7aa32cd..82916cc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -411,6 +411,8 @@
 void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_disable_autoidle_all(void);
+int omap2_clk_allow_idle(struct clk *clk);
+int omap2_clk_deny_idle(struct clk *clk);
 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 4b03394..f17f006 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -132,7 +132,7 @@
 	u8 _flags;
 	const u8 dep_bit;
 	const u8 prcm_partition;
-	const s16 cm_inst;
+	const u16 cm_inst;
 	const u16 clkdm_offs;
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
@@ -218,6 +218,7 @@
 extern void __init omap44xx_clockdomains_init(void);
 extern void __init omap54xx_clockdomains_init(void);
 extern void __init dra7xx_clockdomains_init(void);
+void am43xx_clockdomains_init(void);
 
 extern void clkdm_add_autodeps(struct clockdomain *clkdm);
 extern void clkdm_del_autodeps(struct clockdomain *clkdm);
@@ -226,6 +227,7 @@
 extern struct clkdm_ops omap3_clkdm_operations;
 extern struct clkdm_ops omap4_clkdm_operations;
 extern struct clkdm_ops am33xx_clkdm_operations;
+extern struct clkdm_ops am43xx_clkdm_operations;
 
 extern struct clkdm_dep gfx_24xx_wkdeps[];
 extern struct clkdm_dep dsp_24xx_wkdeps[];
diff --git a/arch/arm/mach-omap2/clockdomains43xx_data.c b/arch/arm/mach-omap2/clockdomains43xx_data.c
new file mode 100644
index 0000000..6d71c60
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains43xx_data.c
@@ -0,0 +1,196 @@
+/*
+ * AM43xx Clock domains framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prcm44xx.h"
+#include "prcm43xx.h"
+
+static struct clockdomain l4_cefuse_43xx_clkdm = {
+	.name		  = "l4_cefuse_clkdm",
+	.pwrdm		  = { .name = "cefuse_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_CEFUSE_INST,
+	.clkdm_offs	  = AM43XX_CM_CEFUSE_CEFUSE_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain mpu_43xx_clkdm = {
+	.name		  = "mpu_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_MPU_INST,
+	.clkdm_offs	  = AM43XX_CM_MPU_MPU_CDOFFS,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4ls_43xx_clkdm = {
+	.name		  = "l4ls_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L4LS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain tamper_43xx_clkdm = {
+	.name		  = "tamper_clkdm",
+	.pwrdm		  = { .name = "tamper_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_TAMPER_INST,
+	.clkdm_offs	  = AM43XX_CM_TAMPER_TAMPER_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_rtc_43xx_clkdm = {
+	.name		  = "l4_rtc_clkdm",
+	.pwrdm		  = { .name = "rtc_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_RTC_INST,
+	.clkdm_offs	  = AM43XX_CM_RTC_RTC_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain pruss_ocp_43xx_clkdm = {
+	.name		  = "pruss_ocp_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_ICSS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain ocpwp_l3_43xx_clkdm = {
+	.name		  = "ocpwp_l3_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_OCPWP_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_tsc_43xx_clkdm = {
+	.name		  = "l3s_tsc_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L3S_TSC_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain dss_43xx_clkdm = {
+	.name		  = "dss_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_DSS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_aon_43xx_clkdm = {
+	.name		  = "l3_aon_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L3_AON_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain emif_43xx_clkdm = {
+	.name		  = "emif_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_EMIF_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_aon_43xx_clkdm = {
+	.name		  = "l4_wkup_aon_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS,
+};
+
+static struct clockdomain l3_43xx_clkdm = {
+	.name		  = "l3_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_43xx_clkdm = {
+	.name		  = "l4_wkup_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_WKUP_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain cpsw_125mhz_43xx_clkdm = {
+	.name		  = "cpsw_125mhz_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_CPSW_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l3_43xx_clkdm = {
+	.name		  = "gfx_l3_clkdm",
+	.pwrdm		  = { .name = "gfx_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_GFX_INST,
+	.clkdm_offs	  = AM43XX_CM_GFX_GFX_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_43xx_clkdm = {
+	.name		  = "l3s_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L3S_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain *clockdomains_am43xx[] __initdata = {
+	&l4_cefuse_43xx_clkdm,
+	&mpu_43xx_clkdm,
+	&l4ls_43xx_clkdm,
+	&tamper_43xx_clkdm,
+	&l4_rtc_43xx_clkdm,
+	&pruss_ocp_43xx_clkdm,
+	&ocpwp_l3_43xx_clkdm,
+	&l3s_tsc_43xx_clkdm,
+	&dss_43xx_clkdm,
+	&l3_aon_43xx_clkdm,
+	&emif_43xx_clkdm,
+	&l4_wkup_aon_43xx_clkdm,
+	&l3_43xx_clkdm,
+	&l4_wkup_43xx_clkdm,
+	&cpsw_125mhz_43xx_clkdm,
+	&gfx_l3_43xx_clkdm,
+	&l3s_43xx_clkdm,
+	NULL
+};
+
+void __init am43xx_clockdomains_init(void)
+{
+	clkdm_register_platform_funcs(&am43xx_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_am43xx);
+	clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index 6774a53..ce25abb 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -327,6 +327,73 @@
 	.clkdm_clk_disable	= omap2xxx_clkdm_clk_disable,
 };
 
+int omap2xxx_cm_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	return (f1 | f2) ? 1 : 0;
+}
+
+int omap2xxx_cm_mpu_retention_allowed(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
+		return 0;
+	/* Check for UART3. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3_MASK)
+		return 0;
+
+	return 1;
+}
+
+u32 omap2xxx_cm_get_core_clk_src(void)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	return v;
+}
+
+u32 omap2xxx_cm_get_core_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+}
+
+u32 omap2xxx_cm_get_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+}
+
+u32 omap2xxx_cm_get_pll_status(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+}
+
+void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
+{
+	u32 tmp;
+
+	omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
+	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
+		OMAP24XX_CLKSEL_DSS2_MASK;
+	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
+	if (cpu_is_omap2430())
+		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
+}
+
 /*
  *
  */
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 4cbb39b..891d81c 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -62,6 +62,14 @@
 					 u8 idlest_shift);
 extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
 					s16 *prcm_inst, u8 *idlest_reg_id);
+extern int omap2xxx_cm_fclks_active(void);
+extern int omap2xxx_cm_mpu_retention_allowed(void);
+extern u32 omap2xxx_cm_get_core_clk_src(void);
+extern u32 omap2xxx_cm_get_core_pll_config(void);
+extern u32 omap2xxx_cm_get_pll_config(void);
+extern u32 omap2xxx_cm_get_pll_status(void);
+extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
+					 u32 mdm);
 
 extern int __init omap2xxx_cm_init(void);
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 325a515..40a22e5 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -48,13 +48,13 @@
 /* Private functions */
 
 /* Read a register in a CM instance */
-static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx)
 {
 	return __raw_readl(cm_base + inst + idx);
 }
 
 /* Write into a register in a CM */
-static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx)
 {
 	__raw_writel(val, cm_base + inst + idx);
 }
@@ -138,7 +138,7 @@
  * @c must be the unshifted value for CLKTRCTRL - i.e., this function
  * will handle the shift itself.
  */
-static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -158,7 +158,7 @@
  * Returns true if the clockdomain referred to by (@inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -177,7 +177,7 @@
  * Put a clockdomain referred to by (@inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
 }
@@ -191,7 +191,7 @@
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
 }
@@ -204,7 +204,7 @@
  * Put a clockdomain referred to by (@inst, @cdoffs) into idle
  * No return value.
  */
-void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
 }
@@ -217,7 +217,7 @@
  * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
 }
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index 9d1f4fc..cfb8891 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -377,13 +377,13 @@
 
 
 #ifndef __ASSEMBLER__
-extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs);
+bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
 
-#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+#ifdef CONFIG_SOC_AM33XX
 extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
 extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 9061c30..f6f0288 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -636,6 +636,28 @@
 			       OMAP3_CM_CLKOUT_CTRL_OFFSET);
 }
 
+void omap3_cm_save_scratchpad_contents(u32 *ptr)
+{
+	*ptr++ = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+	*ptr++ = omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 */
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+		~OMAP3430_AUTO_PERIPH_DPLL_MASK;
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+}
+
 /*
  *
  */
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index e8e146f..8224c91 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -83,6 +83,7 @@
 
 extern void omap3_cm_save_context(void);
 extern void omap3_cm_restore_context(void);
+extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
 
 extern int __init omap3xxx_cm_init(void);
 
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index f0290f5..731ca13 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -111,7 +111,7 @@
 /* Public functions */
 
 /* Read a register in a CM instance */
-u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
+u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -120,7 +120,7 @@
 }
 
 /* Write into a register in a CM instance */
-void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
+void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -129,7 +129,7 @@
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
 				   s16 idx)
 {
 	u32 v;
@@ -142,12 +142,12 @@
 	return v;
 }
 
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
+u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
 }
 
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
+u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
 }
@@ -177,7 +177,7 @@
  * @c must be the unshifted value for CLKTRCTRL - i.e., this function
  * will handle the shift itself.
  */
-static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
+static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -196,7 +196,7 @@
  * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs)
+bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -216,7 +216,7 @@
  * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
 }
@@ -231,7 +231,7 @@
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
@@ -245,7 +245,7 @@
  * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
 }
@@ -483,3 +483,12 @@
 	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
 	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
 };
+
+struct clkdm_ops am43xx_clkdm_operations = {
+	.clkdm_sleep		= omap4_clkdm_sleep,
+	.clkdm_wakeup		= omap4_clkdm_wakeup,
+	.clkdm_allow_idle	= omap4_clkdm_allow_idle,
+	.clkdm_deny_idle	= omap4_clkdm_deny_idle,
+	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index bd7bab8..7f56ea4 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -11,11 +11,11 @@
 #ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
 #define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
 
-extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
+bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs);
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
 					 u16 clkctrl_offs);
@@ -27,14 +27,14 @@
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly
  */
-extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx);
-extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
-extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-					   s16 inst, s16 idx);
-extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
-extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
+u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
+void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx);
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+				   u16 inst, s16 idx);
+u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst,
+				   s16 idx);
+u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
+				     s16 idx);
 extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
 					   u32 mask);
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 4a5684b..f7644fe 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -98,6 +98,7 @@
 void ti81xx_init_early(void);
 void am33xx_init_early(void);
 void am43xx_init_early(void);
+void am43xx_init_late(void);
 void omap4430_init_early(void);
 void omap5_init_early(void);
 void omap3_init_late(void);	/* Do not use this one */
@@ -109,8 +110,11 @@
 void omap3630_init_late(void);
 void am35xx_init_late(void);
 void ti81xx_init_late(void);
+void am33xx_init_late(void);
+void omap5_init_late(void);
 int omap2_common_pm_late_init(void);
 void dra7xx_init_early(void);
+void dra7xx_init_late(void);
 
 #ifdef CONFIG_SOC_BUS
 void omap_soc_device_init(void);
@@ -288,6 +292,9 @@
 
 #endif
 
+void pdata_quirks_init(struct of_device_id *);
+void omap_pcs_legacy_init(int irq, void (*rearm)(void));
+
 struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 31e0dfe..44bb4d5 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -46,17 +46,7 @@
 struct omap3_scratchpad_prcm_block {
 	u32 prm_clksrc_ctrl;
 	u32 prm_clksel;
-	u32 cm_clksel_core;
-	u32 cm_clksel_wkup;
-	u32 cm_clken_pll;
-	u32 cm_autoidle_pll;
-	u32 cm_clksel1_pll;
-	u32 cm_clksel2_pll;
-	u32 cm_clksel3_pll;
-	u32 cm_clken_pll_mpu;
-	u32 cm_autoidle_pll_mpu;
-	u32 cm_clksel1_pll_mpu;
-	u32 cm_clksel2_pll_mpu;
+	u32 cm_contents[11];
 	u32 prcm_block_size;
 };
 
@@ -347,34 +337,9 @@
 	prcm_block_contents.prm_clksel =
 		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
 				       OMAP3_PRM_CLKSEL_OFFSET);
-	prcm_block_contents.cm_clksel_core =
-			omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clksel_wkup =
-			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clken_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	/*
-	 * As per erratum i671, ROM code does not respect the PER DPLL
-	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
-	 * Then,  in anycase, clear these bits to avoid extra latencies.
-	 */
-	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
-			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
-	prcm_block_contents.cm_clksel1_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
-	prcm_block_contents.cm_clksel3_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
-	prcm_block_contents.cm_clken_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
-	prcm_block_contents.cm_autoidle_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
-	prcm_block_contents.cm_clksel1_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+
+	omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
+
 	prcm_block_contents.prcm_block_size = 0x0;
 
 	/* Populate the SDRC block contents */
@@ -604,4 +569,15 @@
 	return 0;
 }
 
+/**
+ * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
+ *
+ * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
+ * force disable IVA2 so that it does not prevent any low-power states.
+ */
+void omap3_ctrl_set_iva_bootmode_idle(void)
+{
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index f7d7c2e..da05480 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -427,6 +427,7 @@
 extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
+extern void omap3_ctrl_set_iva_bootmode_idle(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5c5315b..0dd6398 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,7 +19,6 @@
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
-#include <linux/wl12xx.h>
 #include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
@@ -37,6 +36,7 @@
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
+#include "display.h"
 
 #define L3_MODULES_MAX_LEN 12
 #define L3_MODULES 3
@@ -466,47 +466,13 @@
 	.resource 	= &omap_vout_resource[0],
 	.id		= -1,
 };
-static void omap_init_vout(void)
+
+int __init omap_init_vout(void)
 {
-	if (platform_device_register(&omap_vout_device) < 0)
-		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
+	return platform_device_register(&omap_vout_device);
 }
 #else
-static inline void omap_init_vout(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_WL12XX)
-
-static struct wl12xx_platform_data wl12xx __initdata;
-
-void __init omap_init_wl12xx_of(void)
-{
-	int ret;
-
-	if (!of_have_populated_dt())
-		return;
-
-	if (of_machine_is_compatible("ti,omap4-sdp")) {
-		wl12xx.board_ref_clock = WL12XX_REFCLOCK_26;
-		wl12xx.board_tcxo_clock = WL12XX_TCXOCLOCK_26;
-		wl12xx.irq = gpio_to_irq(53);
-	} else if (of_machine_is_compatible("ti,omap4-panda")) {
-		wl12xx.board_ref_clock = WL12XX_REFCLOCK_38;
-		wl12xx.irq = gpio_to_irq(53);
-	} else {
-		return;
-	}
-
-	ret = wl12xx_set_platform_data(&wl12xx);
-	if (ret) {
-		pr_err("error setting wl12xx data: %d\n", ret);
-		return;
-	}
-}
-#else
-static inline void omap_init_wl12xx_of(void)
-{
-}
+int __init omap_init_vout(void) { return 0; }
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -531,12 +497,8 @@
 		omap_init_sham();
 		omap_init_aes();
 		omap_init_rng();
-	} else {
-		/* These can be removed when bindings are done */
-		omap_init_wl12xx_of();
 	}
 	omap_init_sti();
-	omap_init_vout();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 03a0516..a4e536b 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -416,6 +416,34 @@
 		}
 	}
 
+	/* create DRM device */
+	r = omap_init_drm();
+	if (r < 0) {
+		pr_err("Unable to register omapdrm device\n");
+		return r;
+	}
+
+	/* create vrfb device */
+	r = omap_init_vrfb();
+	if (r < 0) {
+		pr_err("Unable to register omapvrfb device\n");
+		return r;
+	}
+
+	/* create FB device */
+	r = omap_init_fb();
+	if (r < 0) {
+		pr_err("Unable to register omapfb device\n");
+		return r;
+	}
+
+	/* create V4L2 display device */
+	r = omap_init_vout();
+	if (r < 0) {
+		pr_err("Unable to register omap_vout device\n");
+		return r;
+	}
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index b871b017..f3d2ce4 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -26,4 +26,8 @@
 	bool	has_framedonetv_irq;
 };
 
+int omap_init_drm(void);
+int omap_init_vrfb(void);
+int omap_init_fb(void);
+int omap_init_vout(void);
 #endif
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 59a4af7..facd740 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -26,10 +26,9 @@
 #include <linux/platform_data/omap_drm.h>
 
 #include "soc.h"
-#include "omap_device.h"
-#include "omap_hwmod.h"
+#include "display.h"
 
-#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
 
 static struct omap_drm_platform_data platform_data;
 
@@ -42,26 +41,13 @@
 	.id = 0,
 };
 
-static int __init omap_init_drm(void)
+int __init omap_init_drm(void)
 {
-	struct omap_hwmod *oh = NULL;
-	struct platform_device *pdev;
-
-	/* lookup and populate the DMM information, if present - OMAP4+ */
-	oh = omap_hwmod_lookup("dmm");
-
-	if (oh) {
-		pdev = omap_device_build(oh->name, -1, oh, NULL, 0);
-		WARN(IS_ERR(pdev), "Could not build omap_device for %s\n",
-			oh->name);
-	}
-
 	platform_data.omaprev = GET_OMAP_TYPE;
 
 	return platform_device_register(&omap_drm_device);
 
 }
-
-omap_arch_initcall(omap_init_drm);
-
+#else
+int __init omap_init_drm(void) { return 0; }
 #endif
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index bf89eff..365bfd3 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -213,3 +213,47 @@
 	platform_device_register(&sdp4430_tpd_device);
 	platform_device_register(&sdp4430_hdmi_connector_device);
 }
+
+
+/* OMAP3 IGEPv2 data */
+
+#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO	170
+
+/* DVI Connector */
+static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
+};
+
+static struct platform_device omap3_igep2_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_igep2_dvi_connector_pdata,
+};
+
+/* TFP410 DPI-to-DVI chip */
+static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
+};
+
+static struct platform_device omap3_igep2_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_igep2_tfp410_pdata,
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+	.default_display_name = "dvi",
+};
+
+void __init omap3_igep2_display_init_of(void)
+{
+	omap_display_init(&igep2_dss_data);
+
+	platform_device_register(&omap3_igep2_tfp410_device);
+	platform_device_register(&omap3_igep2_dvi_connector_device);
+}
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
index c28fe3c..a9becf0 100644
--- a/arch/arm/mach-omap2/dss-common.h
+++ b/arch/arm/mach-omap2/dss-common.h
@@ -8,5 +8,6 @@
 
 void __init omap4_panda_display_init_of(void);
 void __init omap_4430sdp_display_init_of(void);
+void __init omap3_igep2_display_init_of(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 2ca33cc..26e28e9 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -32,6 +32,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "display.h"
 
 #ifdef CONFIG_OMAP2_VRFB
 
@@ -64,7 +65,7 @@
 	DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
 };
 
-static int __init omap_init_vrfb(void)
+int __init omap_init_vrfb(void)
 {
 	struct platform_device *pdev;
 	const struct resource *res;
@@ -85,8 +86,8 @@
 
 	return PTR_RET(pdev);
 }
-
-omap_arch_initcall(omap_init_vrfb);
+#else
+int __init omap_init_vrfb(void) { return 0; }
 #endif
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -105,11 +106,10 @@
 	.num_resources = 0,
 };
 
-static int __init omap_init_fb(void)
+int __init omap_init_fb(void)
 {
 	return platform_device_register(&omap_fb_device);
 }
-
-omap_arch_initcall(omap_init_fb);
-
+#else
+int __init omap_init_fb(void) { return 0; }
 #endif
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 579697a..51525fa 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1521,6 +1521,42 @@
 	return ret;
 }
 
+/*
+ * REVISIT: Add timing support from slls644g.pdf
+ */
+static int gpmc_probe_8250(struct platform_device *pdev,
+				struct device_node *child)
+{
+	struct resource res;
+	unsigned long base;
+	int ret, cs;
+
+	if (of_property_read_u32(child, "reg", &cs) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(child, 0, &res) < 0) {
+		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	ret = gpmc_cs_request(cs, resource_size(&res), &base);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+		return ret;
+	}
+
+	if (of_platform_device_create(child, NULL, &pdev->dev))
+		return 0;
+
+	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+
+	return -ENODEV;
+}
+
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
 	int ret;
@@ -1564,6 +1600,8 @@
 		else if (of_node_cmp(child->name, "ethernet") == 0 ||
 			 of_node_cmp(child->name, "nor") == 0)
 			ret = gpmc_probe_generic_child(pdev, child);
+		else if (of_node_cmp(child->name, "8250") == 0)
+			ret = gpmc_probe_8250(pdev, child);
 
 		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
 			 __func__, child->full_name))
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0289adc..9428c5f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <linux/slab.h>
 
 #ifdef CONFIG_SOC_BUS
@@ -130,6 +131,17 @@
 	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
 }
 
+static int __init omap_feed_randpool(void)
+{
+	struct omap_die_id odi;
+
+	/* Throw the die ID into the entropy pool at boot */
+	omap_get_die_id(&odi);
+	add_device_randomness(&odi, sizeof(odi));
+	return 0;
+}
+omap_device_initcall(omap_feed_randpool);
+
 void __init omap2xxx_check_revision(void)
 {
 	int i, j;
@@ -576,8 +588,8 @@
 	case 0xb942:
 		switch (rev) {
 		case 0:
-			omap_revision = OMAP5430_REV_ES1_0;
-			break;
+			/* No support for ES1.0 Test chip */
+			BUG();
 		case 1:
 		default:
 			omap_revision = OMAP5430_REV_ES2_0;
@@ -587,8 +599,8 @@
 	case 0xb998:
 		switch (rev) {
 		case 0:
-			omap_revision = OMAP5432_REV_ES1_0;
-			break;
+			/* No support for ES1.0 Test chip */
+			BUG();
 		case 1:
 		default:
 			omap_revision = OMAP5432_REV_ES2_0;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index ff2113c..cd22262 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -583,6 +583,11 @@
 	omap_hwmod_init_postsetup();
 	omap_clk_init = am33xx_clk_init;
 }
+
+void __init am33xx_init_late(void)
+{
+	omap_common_late_init();
+}
 #endif
 
 #ifdef CONFIG_SOC_AM43XX
@@ -594,7 +599,18 @@
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
+	omap_prm_base_init();
+	omap_cm_base_init();
 	omap3xxx_check_revision();
+	am43xx_powerdomains_init();
+	am43xx_clockdomains_init();
+	am43xx_hwmod_init();
+	omap_hwmod_init_postsetup();
+}
+
+void __init am43xx_init_late(void)
+{
+	omap_common_late_init();
 }
 #endif
 
@@ -651,6 +667,11 @@
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 }
+
+void __init omap5_init_late(void)
+{
+	omap_common_late_init();
+}
 #endif
 
 #ifdef CONFIG_SOC_DRA7XX
@@ -671,6 +692,11 @@
 	dra7xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 }
+
+void __init dra7xx_init_late(void)
+{
+	omap_common_late_init();
+}
 #endif
 
 
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3926f37..e022a86 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -233,7 +233,7 @@
 			goto out;
 
 		irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_TI81XX
+#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX)
 		if (irqnr)
 			goto out;
 		irqnr = readl_relaxed(base_addr + 0xf8);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 5d87680..b4ac3af 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -25,6 +25,7 @@
 
 #include "soc.h"
 #include "omap_device.h"
+#include "clock.h"
 
 /*
  * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
@@ -33,22 +34,18 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
+static struct clk *mcbsp_iclks[5];
+
 static int omap3_enable_st_clock(unsigned int id, bool enable)
 {
-	unsigned int w;
-
 	/*
 	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
 	 * are enabled or sidetones start sounding ugly.
 	 */
-	w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
 	if (enable)
-		w &= ~(1 << (id - 2));
+		return omap2_clk_deny_idle(mcbsp_iclks[id]);
 	else
-		w |= 1 << (id - 2);
-	omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
-
-	return 0;
+		return omap2_clk_allow_idle(mcbsp_iclks[id]);
 }
 
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
@@ -58,6 +55,7 @@
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
+	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -99,6 +97,8 @@
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
 		pdata->enable_st_clock = omap3_enable_st_clock;
+		sprintf(clk_name, "mcbsp%d_ick", id);
+		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f82cf87..48094b5 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -811,6 +811,12 @@
 		}
 	}
 
+	omap_mux_dbg_init();
+
+	/* see pinctrl-single-omap for the wake-up interrupt handling */
+	if (of_have_populated_dt())
+		return 0;
+
 	ret = request_irq(omap_prcm_event_to_irq("io"),
 		omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
 			"hwmod_io", omap_mux_late_init);
@@ -818,8 +824,6 @@
 	if (ret)
 		pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
 
-	omap_mux_dbg_init();
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index b970440..5ac122e 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  *
  * This program is free software,you can redistribute it and/or modify
@@ -70,3 +72,77 @@
 {
 	return omap_secure_memblock_base;
 }
+
+/**
+ * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls
+ * @idx: The PPA API index
+ * @process: Process ID
+ * @flag: The flag indicating criticality of operation
+ * @nargs: Number of valid arguments out of four.
+ * @arg1, arg2, arg3 args4: Parameters passed to secure API
+ *
+ * Return the non-zero error value on failure.
+ *
+ * NOTE: rx51_secure_dispatcher differs from omap_secure_dispatcher because
+ *       it calling omap_smc3() instead omap_smc2() and param[0] is nargs+1
+ */
+u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+			   u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 ret;
+	u32 param[5];
+
+	param[0] = nargs+1; /* RX-51 needs number of arguments + 1 */
+	param[1] = arg1;
+	param[2] = arg2;
+	param[3] = arg3;
+	param[4] = arg4;
+
+	/*
+	 * Secure API needs physical address
+	 * pointer for the parameters
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	flush_cache_all();
+	outer_clean_range(__pa(param), __pa(param + 5));
+	ret = omap_smc3(idx, process, flag, __pa(param));
+	flush_cache_all();
+	local_fiq_enable();
+	local_irq_enable();
+
+	return ret;
+}
+
+/**
+ * rx51_secure_update_aux_cr: Routine to modify the contents of Auxiliary Control Register
+ *  @set_bits: bits to set in ACR
+ *  @clr_bits: bits to clear in ACR
+ *
+ * Return the non-zero error value on failure.
+*/
+u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+
+	return rx51_secure_dispatcher(RX51_PPA_WRITE_ACR,
+				      0,
+				      FLAG_START_CRITICAL,
+				      1, acr, 0, 0, 0);
+}
+
+/**
+ * rx51_secure_rng_call: Routine for HW random generator
+ */
+u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag)
+{
+	return rx51_secure_dispatcher(RX51_PPA_HWRNG,
+				      0,
+				      NO_FLAG,
+				      3, ptr, count, flag, 0);
+}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 0e72917..8cc7d33 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -42,23 +44,38 @@
 #define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
 #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
 
+#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX	0x109
+
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 
+/* Secure RX-51 PPA (Primary Protected Application) APIs */
+#define RX51_PPA_HWRNG			29
+#define RX51_PPA_L2_INVAL		40
+#define RX51_PPA_WRITE_ACR		42
+
 #ifndef __ASSEMBLER__
 
 extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
 				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
+extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
 
+extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
+extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
+
 #ifdef CONFIG_OMAP4_ERRATA_I688
 extern int omap_barrier_reserve_memblock(void);
 #else
 static inline void omap_barrier_reserve_memblock(void)
 { }
 #endif
+
+void set_cntfreq(void);
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index f6441c1..fd90125 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -1,9 +1,11 @@
 /*
- * OMAP44xx secure APIs file.
+ * OMAP34xx and OMAP44xx secure APIs file.
  *
  * Copyright (C) 2010 Texas Instruments, Inc.
  * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software,you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -54,6 +56,23 @@
 	ldmfd   sp!, {r4-r12, pc}
 ENDPROC(omap_smc2)
 
+/**
+ * u32 omap_smc3(u32 service_id, u32 process_id, u32 flag, u32 pargs)
+ * Low level common routine for secure HAL and PPA APIs via smc #1
+ * r0 - @service_id: Secure Service ID
+ * r1 - @process_id: Process ID
+ * r2 - @flag: Flag to indicate the criticality of operation
+ * r3 - @pargs: Physical address of parameter list
+ */
+ENTRY(omap_smc3)
+	stmfd	sp!, {r4-r11, lr}
+	mov	r12, r0		@ Copy the secure service ID
+	mov	r6, #0xff	@ Indicate new Task call
+	dsb			@ Memory Barrier (not sure if needed, copied from omap_smc2)
+	smc	#1		@ Call PPA service
+	ldmfd	sp!, {r4-r11, pc}
+ENDPROC(omap_smc3)
+
 ENTRY(omap_modify_auxcoreboot0)
 	stmfd   sp!, {r1-r12, lr}
 	ldr	r12, =0x104
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8912110..75e95d4 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -66,6 +66,13 @@
 							4, 0, 0, 0, 0, 0);
 
 	/*
+	 * Configure the CNTFRQ register for the secondary cpu's which
+	 * indicates the frequency of the cpu local timers.
+	 */
+	if (soc_is_omap54xx() || soc_is_dra7xx())
+		set_cntfreq();
+
+	/*
 	 * Synchronise with the boot thread.
 	 */
 	spin_lock(&boot_lock);
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 813c615..3664562 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -33,8 +33,12 @@
 #include "omap4-sar-layout.h"
 #include "common.h"
 
-#define MAX_NR_REG_BANKS	5
-#define MAX_IRQS		160
+#define AM43XX_NR_REG_BANKS	7
+#define AM43XX_IRQS		224
+#define MAX_NR_REG_BANKS	AM43XX_NR_REG_BANKS
+#define MAX_IRQS		AM43XX_IRQS
+#define DEFAULT_NR_REG_BANKS	5
+#define DEFAULT_IRQS		160
 #define WKG_MASK_ALL		0x00000000
 #define WKG_UNMASK_ALL		0xffffffff
 #define CPU_ENA_OFFSET		0x400
@@ -47,8 +51,8 @@
 static void __iomem *sar_base;
 static DEFINE_RAW_SPINLOCK(wakeupgen_lock);
 static unsigned int irq_target_cpu[MAX_IRQS];
-static unsigned int irq_banks = MAX_NR_REG_BANKS;
-static unsigned int max_irqs = MAX_IRQS;
+static unsigned int irq_banks = DEFAULT_NR_REG_BANKS;
+static unsigned int max_irqs = DEFAULT_IRQS;
 static unsigned int omap_secure_apis;
 
 /*
@@ -418,12 +422,16 @@
 		irq_banks = OMAP4_NR_BANKS;
 		max_irqs = OMAP4_NR_IRQS;
 		omap_secure_apis = 1;
+	} else if (soc_is_am43xx()) {
+		irq_banks = AM43XX_NR_REG_BANKS;
+		max_irqs = AM43XX_IRQS;
 	}
 
 	/* Clear all IRQ bitmasks at wakeupGen level */
 	for (i = 0; i < irq_banks; i++) {
 		wakeupgen_writel(0, i, CPU0_ID);
-		wakeupgen_writel(0, i, CPU1_ID);
+		if (!soc_is_am43xx())
+			wakeupgen_writel(0, i, CPU1_ID);
 	}
 
 	/*
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d9ee0ff..e3f0eca 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2357,25 +2357,29 @@
 /**
  * _init_mpu_rt_base - populate the virtual address for a hwmod
  * @oh: struct omap_hwmod * to locate the virtual address
+ * @data: (unused, caller should pass NULL)
+ * @np: struct device_node * of the IP block's device node in the DT data
  *
  * Cache the virtual address used by the MPU to access this IP block's
  * registers.  This address is needed early so the OCP registers that
  * are part of the device's address space can be ioremapped properly.
- * No return value.
+ *
+ * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
+ * -ENXIO on absent or invalid register target address space.
  */
-static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
+				    struct device_node *np)
 {
 	struct omap_hwmod_addr_space *mem;
 	void __iomem *va_start = NULL;
-	struct device_node *np;
 
 	if (!oh)
-		return;
+		return -EINVAL;
 
 	_save_mpu_port_index(oh);
 
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return;
+		return -ENXIO;
 
 	mem = _find_mpu_rt_addr_space(oh);
 	if (!mem) {
@@ -2383,25 +2387,24 @@
 			 oh->name);
 
 		/* Extract the IO space from device tree blob */
-		if (!of_have_populated_dt())
-			return;
+		if (!np)
+			return -ENXIO;
 
-		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
-		if (np)
-			va_start = of_iomap(np, oh->mpu_rt_idx);
+		va_start = of_iomap(np, oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
 
 	if (!va_start) {
 		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
-		return;
+		return -ENXIO;
 	}
 
 	pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
 		 oh->name, va_start);
 
 	oh->_mpu_rt_va = va_start;
+	return 0;
 }
 
 /**
@@ -2414,18 +2417,28 @@
  * registered at this point.  This is the first of two phases for
  * hwmod initialization.  Code called here does not touch any hardware
  * registers, it simply prepares internal data structures.  Returns 0
- * upon success or if the hwmod isn't registered, or -EINVAL upon
- * failure.
+ * upon success or if the hwmod isn't registered or if the hwmod's
+ * address space is not defined, or -EINVAL upon failure.
  */
 static int __init _init(struct omap_hwmod *oh, void *data)
 {
 	int r;
+	struct device_node *np = NULL;
 
 	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
 
-	if (oh->class->sysc)
-		_init_mpu_rt_base(oh, NULL);
+	if (of_have_populated_dt())
+		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+
+	if (oh->class->sysc) {
+		r = _init_mpu_rt_base(oh, NULL, np);
+		if (r < 0) {
+			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
+			     oh->name);
+			return 0;
+		}
+	}
 
 	r = _init_clocks(oh, NULL);
 	if (r < 0) {
@@ -2433,6 +2446,12 @@
 		return -EINVAL;
 	}
 
+	if (np)
+		if (of_find_property(np, "ti,no-reset-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_RESET;
+		if (of_find_property(np, "ti,no-idle-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_IDLE;
+
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
 	return 0;
@@ -4125,6 +4144,14 @@
 		soc_ops.init_clkdm = _init_clkdm;
 		soc_ops.update_context_lost = _omap4_update_context_lost;
 		soc_ops.get_context_lost = _omap4_get_context_lost;
+	} else if (soc_is_am43xx()) {
+		soc_ops.enable_module = _omap4_enable_module;
+		soc_ops.disable_module = _omap4_disable_module;
+		soc_ops.wait_target_ready = _omap4_wait_target_ready;
+		soc_ops.assert_hardreset = _omap4_assert_hardreset;
+		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else if (soc_is_am33xx()) {
 		soc_ops.enable_module = _am33xx_enable_module;
 		soc_ops.disable_module = _am33xx_disable_module;
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index d02acf9..0f97d63 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -752,6 +752,7 @@
 extern int omap54xx_hwmod_init(void);
 extern int am33xx_hwmod_init(void);
 extern int dra7xx_hwmod_init(void);
+int am43xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
new file mode 100644
index 0000000..130332c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -0,0 +1,163 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Data common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H
+
+extern struct omap_hwmod_ocp_if am33xx_mpu__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_s;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr;
+extern struct omap_hwmod_ocp_if am33xx_mpu__prcm;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
+extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio1;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio2;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3;
+extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__mmc2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer3;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart3;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart4;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart5;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0;
+
+extern struct omap_hwmod am33xx_l3_main_hwmod;
+extern struct omap_hwmod am33xx_l3_s_hwmod;
+extern struct omap_hwmod am33xx_l3_instr_hwmod;
+extern struct omap_hwmod am33xx_l4_ls_hwmod;
+extern struct omap_hwmod am33xx_l4_wkup_hwmod;
+extern struct omap_hwmod am33xx_mpu_hwmod;
+extern struct omap_hwmod am33xx_pruss_hwmod;
+extern struct omap_hwmod am33xx_gfx_hwmod;
+extern struct omap_hwmod am33xx_prcm_hwmod;
+extern struct omap_hwmod am33xx_aes0_hwmod;
+extern struct omap_hwmod am33xx_sha0_hwmod;
+extern struct omap_hwmod am33xx_ocmcram_hwmod;
+extern struct omap_hwmod am33xx_smartreflex0_hwmod;
+extern struct omap_hwmod am33xx_smartreflex1_hwmod;
+extern struct omap_hwmod am33xx_cpgmac0_hwmod;
+extern struct omap_hwmod am33xx_mdio_hwmod;
+extern struct omap_hwmod am33xx_dcan0_hwmod;
+extern struct omap_hwmod am33xx_dcan1_hwmod;
+extern struct omap_hwmod am33xx_elm_hwmod;
+extern struct omap_hwmod am33xx_epwmss0_hwmod;
+extern struct omap_hwmod am33xx_ecap0_hwmod;
+extern struct omap_hwmod am33xx_eqep0_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
+extern struct omap_hwmod am33xx_epwmss1_hwmod;
+extern struct omap_hwmod am33xx_ecap1_hwmod;
+extern struct omap_hwmod am33xx_eqep1_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
+extern struct omap_hwmod am33xx_epwmss2_hwmod;
+extern struct omap_hwmod am33xx_ecap2_hwmod;
+extern struct omap_hwmod am33xx_eqep2_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
+extern struct omap_hwmod am33xx_gpio1_hwmod;
+extern struct omap_hwmod am33xx_gpio2_hwmod;
+extern struct omap_hwmod am33xx_gpio3_hwmod;
+extern struct omap_hwmod am33xx_gpmc_hwmod;
+extern struct omap_hwmod am33xx_i2c1_hwmod;
+extern struct omap_hwmod am33xx_i2c2_hwmod;
+extern struct omap_hwmod am33xx_i2c3_hwmod;
+extern struct omap_hwmod am33xx_mailbox_hwmod;
+extern struct omap_hwmod am33xx_mcasp0_hwmod;
+extern struct omap_hwmod am33xx_mcasp1_hwmod;
+extern struct omap_hwmod am33xx_mmc0_hwmod;
+extern struct omap_hwmod am33xx_mmc1_hwmod;
+extern struct omap_hwmod am33xx_mmc2_hwmod;
+extern struct omap_hwmod am33xx_rtc_hwmod;
+extern struct omap_hwmod am33xx_spi0_hwmod;
+extern struct omap_hwmod am33xx_spi1_hwmod;
+extern struct omap_hwmod am33xx_spinlock_hwmod;
+extern struct omap_hwmod am33xx_timer1_hwmod;
+extern struct omap_hwmod am33xx_timer2_hwmod;
+extern struct omap_hwmod am33xx_timer3_hwmod;
+extern struct omap_hwmod am33xx_timer4_hwmod;
+extern struct omap_hwmod am33xx_timer5_hwmod;
+extern struct omap_hwmod am33xx_timer6_hwmod;
+extern struct omap_hwmod am33xx_timer7_hwmod;
+extern struct omap_hwmod am33xx_tpcc_hwmod;
+extern struct omap_hwmod am33xx_tptc0_hwmod;
+extern struct omap_hwmod am33xx_tptc1_hwmod;
+extern struct omap_hwmod am33xx_tptc2_hwmod;
+extern struct omap_hwmod am33xx_uart1_hwmod;
+extern struct omap_hwmod am33xx_uart2_hwmod;
+extern struct omap_hwmod am33xx_uart3_hwmod;
+extern struct omap_hwmod am33xx_uart4_hwmod;
+extern struct omap_hwmod am33xx_uart5_hwmod;
+extern struct omap_hwmod am33xx_uart6_hwmod;
+extern struct omap_hwmod am33xx_wd_timer1_hwmod;
+
+extern struct omap_hwmod_class am33xx_l4_hwmod_class;
+extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
+extern struct omap_hwmod_class am33xx_control_hwmod_class;
+extern struct omap_hwmod_class am33xx_gpio_hwmod_class;
+extern struct omap_hwmod_class am33xx_timer_hwmod_class;
+extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
+extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
+extern struct omap_hwmod_class am33xx_spi_hwmod_class;
+
+extern struct omap_gpio_dev_attr gpio_dev_attr;
+extern struct omap2_mcspi_dev_attr mcspi_attrib;
+
+void omap_hwmod_am33xx_reg(void);
+void omap_hwmod_am43xx_reg(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
new file mode 100644
index 0000000..e2db378
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -0,0 +1,643 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Interconnects common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sizes.h>
+#include "omap_hwmod.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+
+/* mpu -> l3 main */
+struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> l3 s */
+struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_s_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 per/ls */
+struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_ls_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 wkup */
+struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> l3 instr */
+struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_instr_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> prcm */
+struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_prcm_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l3 main*/
+struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* pru-icss -> l3 main */
+struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
+	.master		= &am33xx_pruss_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gfx -> l3 main */
+struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
+	.master		= &am33xx_gfx_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> gfx */
+struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_gfx_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 wkup -> rtc */
+struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_rtc_hwmod,
+	.clk		= "clkdiv32k_ick",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per/ls -> DCAN0 */
+struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> DCAN1 */
+struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> GPIO2 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio3 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio4 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+	.master		= &am33xx_cpgmac0_hwmod,
+	.slave		= &am33xx_mdio_hwmod,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
+	{
+		.pa_start	= 0x48080000,
+		.pa_end		= 0x48080000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_elm_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_elm_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
+	{
+		.pa_start	= 0x48300000,
+		.pa_end		= 0x48300000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_ecap0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_eqep0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_ehrpwm0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+
+static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
+	{
+		.pa_start	= 0x48302000,
+		.pa_end		= 0x48302000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_ecap1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_eqep1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_ehrpwm1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
+	{
+		.pa_start	= 0x48304000,
+		.pa_end		= 0x48304000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_ecap2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_eqep2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_ehrpwm2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3s cfg -> gpmc */
+static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
+	{
+		.pa_start	= 0x50000000,
+		.pa_end		= 0x50000000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_gpmc_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_gpmc_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* i2c2 */
+struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
+	{
+		.pa_start	= 0x480C8000,
+		.pa_end		= 0x480C8000 + (SZ_4K - 1),
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4 ls -> mailbox */
+struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mailbox_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mailbox_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> spinlock */
+struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spinlock_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp0 */
+static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
+	{
+		.pa_start	= 0x48038000,
+		.pa_end		= 0x48038000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp1 */
+static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
+	{
+		.pa_start	= 0x4803C000,
+		.pa_end		= 0x4803C000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc0 */
+static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
+	{
+		.pa_start	= 0x48060100,
+		.pa_end		= 0x48060100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc1 */
+static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
+	{
+		.pa_start	= 0x481d8100,
+		.pa_end		= 0x481d8100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 s -> mmc2 */
+static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
+	{
+		.pa_start	= 0x47810100,
+		.pa_end		= 0x47810100 + SZ_64K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_mmc2_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_mmc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi0 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi1 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer2 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer3 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer4 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer5 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer6 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer6_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer7 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer7_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc */
+struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tpcc_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc0 */
+static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
+	{
+		.pa_start	= 0x49800000,
+		.pa_end		= 0x49800000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc0_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc1 */
+static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
+	{
+		.pa_start	= 0x49900000,
+		.pa_end		= 0x49900000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc1_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc2 */
+static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
+	{
+		.pa_start	= 0x49a00000,
+		.pa_end		= 0x49a00000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc2_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart2 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart3 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart4 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart5 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart6 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart6_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> ocmc */
+struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_ocmcram_hwmod,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> sha0 HIB2 */
+static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
+	{
+		.pa_start	= 0x53100000,
+		.pa_end		= 0x53100000 + SZ_512 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_sha0_hwmod,
+	.clk		= "sha0_fck",
+	.addr		= am33xx_sha0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> AES0 HIB2 */
+static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
+	{
+		.pa_start	= 0x53500000,
+		.pa_end		= 0x53500000 + SZ_1M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_aes0_hwmod,
+	.clk		= "aes0_fck",
+	.addr		= am33xx_aes0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
new file mode 100644
index 0000000..0f17862
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -0,0 +1,1469 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Hwmod common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "wd_timer.h"
+#include "cm33xx.h"
+#include "prm33xx.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+#include "prcm43xx.h"
+
+#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
+#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
+#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+
+/*
+ * 'l3' class
+ * instance(s): l3_main, l3_s, l3_instr
+ */
+static struct omap_hwmod_class am33xx_l3_hwmod_class = {
+	.name		= "l3",
+};
+
+struct omap_hwmod am33xx_l3_main_hwmod = {
+	.name		= "l3_main",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l3_s */
+struct omap_hwmod am33xx_l3_s_hwmod = {
+	.name		= "l3_s",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+};
+
+/* l3_instr */
+struct omap_hwmod am33xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
+ */
+struct omap_hwmod_class am33xx_l4_hwmod_class = {
+	.name		= "l4",
+};
+
+/* l4_ls */
+struct omap_hwmod am33xx_l4_ls_hwmod = {
+	.name		= "l4_ls",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l4_wkup */
+struct omap_hwmod am33xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mpu' class
+ */
+static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
+	.name	= "mpu",
+};
+
+struct omap_hwmod am33xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &am33xx_mpu_hwmod_class,
+	.clkdm_name	= "mpu_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'wakeup m3' class
+ * Wakeup controller sub-system under wakeup domain
+ */
+struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
+	.name		= "wkup_m3",
+};
+
+/*
+ * 'pru-icss' class
+ * Programmable Real-Time Unit and Industrial Communication Subsystem
+ */
+static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
+	.name	= "pruss",
+};
+
+static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
+	{ .name = "pruss", .rst_shift = 1 },
+};
+
+/* pru-icss */
+/* Pseudo hwmod for reset control purpose only */
+struct omap_hwmod am33xx_pruss_hwmod = {
+	.name		= "pruss",
+	.class		= &am33xx_pruss_hwmod_class,
+	.clkdm_name	= "pruss_ocp_clkdm",
+	.main_clk	= "pruss_ocp_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_pruss_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
+};
+
+/* gfx */
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
+	.name	= "gfx",
+};
+
+static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
+	{ .name = "gfx", .rst_shift = 0, .st_shift = 0},
+};
+
+struct omap_hwmod am33xx_gfx_hwmod = {
+	.name		= "gfx",
+	.class		= &am33xx_gfx_hwmod_class,
+	.clkdm_name	= "gfx_l3_clkdm",
+	.main_clk	= "gfx_fck_div_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_gfx_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_gfx_resets),
+};
+
+/*
+ * 'prcm' class
+ * power and reset manager (whole prcm infrastructure)
+ */
+static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
+	.name	= "prcm",
+};
+
+/* prcm */
+struct omap_hwmod am33xx_prcm_hwmod = {
+	.name		= "prcm",
+	.class		= &am33xx_prcm_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/*
+ * 'aes0' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
+	.rev_offs	= 0x80,
+	.sysc_offs	= 0x84,
+	.syss_offs	= 0x88,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
+	.name		= "aes0",
+	.sysc		= &am33xx_aes0_sysc,
+};
+
+struct omap_hwmod am33xx_aes0_hwmod = {
+	.name		= "aes",
+	.class		= &am33xx_aes0_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "aes0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* sha0 HIB2 (the 'P' (public) device) */
+static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
+	.rev_offs	= 0x100,
+	.sysc_offs	= 0x110,
+	.syss_offs	= 0x114,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
+	.name		= "sha0",
+	.sysc		= &am33xx_sha0_sysc,
+};
+
+struct omap_hwmod am33xx_sha0_hwmod = {
+	.name		= "sham",
+	.class		= &am33xx_sha0_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ocmcram */
+static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
+	.name = "ocmcram",
+};
+
+struct omap_hwmod am33xx_ocmcram_hwmod = {
+	.name		= "ocmcram",
+	.class		= &am33xx_ocmcram_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'smartreflex' class */
+static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
+	.name		= "smartreflex",
+};
+
+/* smartreflex0 */
+struct omap_hwmod am33xx_smartreflex0_hwmod = {
+	.name		= "smartreflex0",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "smartreflex0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* smartreflex1 */
+struct omap_hwmod am33xx_smartreflex1_hwmod = {
+	.name		= "smartreflex1",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "smartreflex1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'control' module class
+ */
+struct omap_hwmod_class am33xx_control_hwmod_class = {
+	.name		= "control",
+};
+
+/*
+ * 'cpgmac' class
+ * cpsw/cpgmac sub system
+ */
+static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x8,
+	.syss_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+			   MSTANDBY_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
+	.name		= "cpgmac0",
+	.sysc		= &am33xx_cpgmac_sysc,
+};
+
+struct omap_hwmod am33xx_cpgmac0_hwmod = {
+	.name		= "cpgmac0",
+	.class		= &am33xx_cpgmac0_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "cpsw_125mhz_gclk",
+	.mpu_rt_idx	= 1,
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * mdio class
+ */
+static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
+	.name		= "davinci_mdio",
+};
+
+struct omap_hwmod am33xx_mdio_hwmod = {
+	.name		= "davinci_mdio",
+	.class		= &am33xx_mdio_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.main_clk	= "cpsw_125mhz_gclk",
+};
+
+/*
+ * dcan class
+ */
+static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
+	.name = "d_can",
+};
+
+/* dcan0 */
+struct omap_hwmod am33xx_dcan0_hwmod = {
+	.name		= "d_can0",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dcan0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* dcan1 */
+struct omap_hwmod am33xx_dcan1_hwmod = {
+	.name		= "d_can1",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dcan1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* elm */
+static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_elm_hwmod_class = {
+	.name		= "elm",
+	.sysc		= &am33xx_elm_sysc,
+};
+
+struct omap_hwmod am33xx_elm_hwmod = {
+	.name		= "elm",
+	.class		= &am33xx_elm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* pwmss  */
+static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
+	.name		= "epwmss",
+	.sysc		= &am33xx_epwmss_sysc,
+};
+
+static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
+	.name		= "ecap",
+};
+
+static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
+	.name		= "eqep",
+};
+
+struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
+	.name		= "ehrpwm",
+};
+
+/* epwmss0 */
+struct omap_hwmod am33xx_epwmss0_hwmod = {
+	.name		= "epwmss0",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap0 */
+struct omap_hwmod am33xx_ecap0_hwmod = {
+	.name		= "ecap0",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep0 */
+struct omap_hwmod am33xx_eqep0_hwmod = {
+	.name		= "eqep0",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm0 */
+struct omap_hwmod am33xx_ehrpwm0_hwmod = {
+	.name		= "ehrpwm0",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* epwmss1 */
+struct omap_hwmod am33xx_epwmss1_hwmod = {
+	.name		= "epwmss1",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap1 */
+struct omap_hwmod am33xx_ecap1_hwmod = {
+	.name		= "ecap1",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep1 */
+struct omap_hwmod am33xx_eqep1_hwmod = {
+	.name		= "eqep1",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm1 */
+struct omap_hwmod am33xx_ehrpwm1_hwmod = {
+	.name		= "ehrpwm1",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* epwmss2 */
+struct omap_hwmod am33xx_epwmss2_hwmod = {
+	.name		= "epwmss2",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap2 */
+struct omap_hwmod am33xx_ecap2_hwmod = {
+	.name		= "ecap2",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep2 */
+struct omap_hwmod am33xx_eqep2_hwmod = {
+	.name		= "eqep2",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm2 */
+struct omap_hwmod am33xx_ehrpwm2_hwmod = {
+	.name		= "ehrpwm2",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/*
+ * 'gpio' class: for gpio 0,1,2,3
+ */
+static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class am33xx_gpio_hwmod_class = {
+	.name		= "gpio",
+	.sysc		= &am33xx_gpio_sysc,
+	.rev		= 2,
+};
+
+struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width	= 32,
+	.dbck_flag	= true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio1_hwmod = {
+	.name		= "gpio2",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio2 */
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio2_hwmod = {
+	.name		= "gpio3",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio3 */
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio3_hwmod = {
+	.name		= "gpio4",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpmc */
+static struct omap_hwmod_class_sysconfig gpmc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
+	.name		= "gpmc",
+	.sysc		= &gpmc_sysc,
+};
+
+struct omap_hwmod am33xx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &am33xx_gpmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.main_clk	= "l3s_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'i2c' class */
+static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0090,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+	.name		= "i2c",
+	.sysc		= &am33xx_i2c_sysc,
+	.rev		= OMAP_I2C_IP_VERSION_2,
+	.reset		= &omap_i2c_reset,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+};
+
+/* i2c1 */
+struct omap_hwmod am33xx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c1 */
+struct omap_hwmod am33xx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4 = {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c3 */
+struct omap_hwmod am33xx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &am33xx_mailbox_sysc,
+};
+
+struct omap_hwmod am33xx_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &am33xx_mailbox_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mcasp' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
+	.name		= "mcasp",
+	.sysc		= &am33xx_mcasp_sysc,
+};
+
+/* mcasp0 */
+struct omap_hwmod am33xx_mcasp0_hwmod = {
+	.name		= "mcasp0",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mcasp0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* mcasp1 */
+struct omap_hwmod am33xx_mcasp1_hwmod = {
+	.name		= "mcasp1",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mcasp1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'mmc' class */
+static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
+	.rev_offs	= 0x1fc,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
+	.name		= "mmc",
+	.sysc		= &am33xx_mmc_sysc,
+};
+
+/* mmc0 */
+static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+struct omap_hwmod am33xx_mmc0_hwmod = {
+	.name		= "mmc1",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc0_dev_attr,
+};
+
+/* mmc1 */
+static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+struct omap_hwmod am33xx_mmc1_hwmod = {
+	.name		= "mmc2",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc1_dev_attr,
+};
+
+/* mmc2 */
+static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+struct omap_hwmod am33xx_mmc2_hwmod = {
+	.name		= "mmc3",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc2_dev_attr,
+};
+
+/*
+ * 'rtc' class
+ * rtc subsystem
+ */
+static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
+	.rev_offs	= 0x0074,
+	.sysc_offs	= 0x0078,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO |
+			  SIDLE_SMART | SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
+	.name		= "rtc",
+	.sysc		= &am33xx_rtc_sysc,
+};
+
+struct omap_hwmod am33xx_rtc_hwmod = {
+	.name		= "rtc",
+	.class		= &am33xx_rtc_hwmod_class,
+	.clkdm_name	= "l4_rtc_clkdm",
+	.main_clk	= "clk_32768_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'spi' class */
+static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0110,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class am33xx_spi_hwmod_class = {
+	.name		= "mcspi",
+	.sysc		= &am33xx_mcspi_sysc,
+	.rev		= OMAP4_MCSPI_REV,
+};
+
+/* spi0 */
+struct omap2_mcspi_dev_attr mcspi_attrib = {
+	.num_chipselect	= 2,
+};
+struct omap_hwmod am33xx_spi0_hwmod = {
+	.name		= "spi0",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/* spi1 */
+struct omap_hwmod am33xx_spi1_hwmod = {
+	.name		= "spi1",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the
+ * processes running on multiple processors
+ */
+
+static struct omap_hwmod_class_sysconfig am33xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
+	.name		= "spinlock",
+	.sysc		= &am33xx_spinlock_sysc,
+};
+
+struct omap_hwmod am33xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &am33xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'timer 2-7' class */
+static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+struct omap_hwmod_class am33xx_timer_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer_sysc,
+};
+
+/* timer1 1ms */
+static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer1ms_sysc,
+};
+
+struct omap_hwmod am33xx_timer1_hwmod = {
+	.name		= "timer1",
+	.class		= &am33xx_timer1ms_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "timer1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer2_hwmod = {
+	.name		= "timer2",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer2_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer3_hwmod = {
+	.name		= "timer3",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer3_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer4_hwmod = {
+	.name		= "timer4",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer4_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer5_hwmod = {
+	.name		= "timer5",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer5_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer6_hwmod = {
+	.name		= "timer6",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer6_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer7_hwmod = {
+	.name		= "timer7",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer7_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tpcc */
+static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
+	.name		= "tpcc",
+};
+
+struct omap_hwmod am33xx_tpcc_hwmod = {
+	.name		= "tpcc",
+	.class		= &am33xx_tpcc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+/* 'tptc' class */
+static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
+	.name		= "tptc",
+	.sysc		= &am33xx_tptc_sysc,
+};
+
+/* tptc0 */
+struct omap_hwmod am33xx_tptc0_hwmod = {
+	.name		= "tptc0",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc1 */
+struct omap_hwmod am33xx_tptc1_hwmod = {
+	.name		= "tptc1",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc2 */
+struct omap_hwmod am33xx_tptc2_hwmod = {
+	.name		= "tptc2",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'uart' class */
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name		= "uart",
+	.sysc		= &uart_sysc,
+};
+
+struct omap_hwmod am33xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &uart_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart3 */
+struct omap_hwmod am33xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart5_hwmod = {
+	.name		= "uart5",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart6_hwmod = {
+	.name		= "uart6",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+	.sysc		= &wdt_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+};
+
+/*
+ * XXX: device.c file uses hardcoded name for watchdog timer
+ * driver "wd_timer2, so we are also using same name as of now...
+ */
+struct omap_hwmod am33xx_wd_timer1_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &am33xx_wd_timer_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "wdt1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static void omap_hwmod_am33xx_clkctrl(void)
+{
+	CLKCTRL(am33xx_uart2_hwmod, AM33XX_CM_PER_UART1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart3_hwmod, AM33XX_CM_PER_UART2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart4_hwmod, AM33XX_CM_PER_UART3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart5_hwmod, AM33XX_CM_PER_UART4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart6_hwmod, AM33XX_CM_PER_UART5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c2_hwmod, AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c3_hwmod, AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc0_hwmod, AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc1_hwmod, AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer3_hwmod, AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer4_hwmod, AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer5_hwmod, AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer6_hwmod, AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer7_hwmod, AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex0_hwmod,
+		AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex1_hwmod,
+		AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart1_hwmod, AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tpcc_hwmod, AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc0_hwmod, AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_cpgmac0_hwmod, AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET);
+}
+
+static void omap_hwmod_am33xx_rst(void)
+{
+	RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET);
+	RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET);
+}
+
+void omap_hwmod_am33xx_reg(void)
+{
+	omap_hwmod_am33xx_clkctrl();
+	omap_hwmod_am33xx_rst();
+}
+
+static void omap_hwmod_am43xx_clkctrl(void)
+{
+	CLKCTRL(am33xx_uart2_hwmod, AM43XX_CM_PER_UART1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart3_hwmod, AM43XX_CM_PER_UART2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart4_hwmod, AM43XX_CM_PER_UART3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart5_hwmod, AM43XX_CM_PER_UART4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart6_hwmod, AM43XX_CM_PER_UART5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c2_hwmod, AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c3_hwmod, AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc0_hwmod, AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc1_hwmod, AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer3_hwmod, AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer4_hwmod, AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer5_hwmod, AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer6_hwmod, AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer7_hwmod, AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex0_hwmod,
+		AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex1_hwmod,
+		AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart1_hwmod, AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c1_hwmod, AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc2_hwmod, AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tpcc_hwmod, AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc0_hwmod, AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_cpgmac0_hwmod, AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET);
+}
+
+static void omap_hwmod_am43xx_rst(void)
+{
+	RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
+	RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
+}
+
+void omap_hwmod_am43xx_reg(void)
+{
+	omap_hwmod_am43xx_clkctrl();
+	omap_hwmod_am43xx_rst();
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 215894f..6b406ca 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -29,6 +29,7 @@
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
 
 /*
  * IP blocks
@@ -52,7 +53,7 @@
 	.name		= "emif",
 	.class		= &am33xx_emif_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_ddr_m2_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -62,79 +63,12 @@
 	},
 };
 
-/*
- * 'l3' class
- * instance(s): l3_main, l3_s, l3_instr
- */
-static struct omap_hwmod_class am33xx_l3_hwmod_class = {
-	.name		= "l3",
-};
-
-static struct omap_hwmod am33xx_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* l3_s */
-static struct omap_hwmod am33xx_l3_s_hwmod = {
-	.name		= "l3_s",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-};
-
-/* l3_instr */
-static struct omap_hwmod am33xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'l4' class
- * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
- */
-static struct omap_hwmod_class am33xx_l4_hwmod_class = {
-	.name		= "l4",
-};
-
-/* l4_ls */
-static struct omap_hwmod am33xx_l4_ls_hwmod = {
-	.name		= "l4_ls",
-	.class		= &am33xx_l4_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* l4_hs */
 static struct omap_hwmod am33xx_l4_hs_hwmod = {
 	.name		= "l4_hs",
 	.class		= &am33xx_l4_hwmod_class,
 	.clkdm_name	= "l4hs_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l4hs_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -144,50 +78,6 @@
 	},
 };
 
-
-/* l4_wkup */
-static struct omap_hwmod am33xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &am33xx_l4_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mpu' class
- */
-static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-static struct omap_hwmod am33xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &am33xx_mpu_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'wakeup m3' class
- * Wakeup controller sub-system under wakeup domain
- */
-static struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
-	.name		= "wkup_m3",
-};
-
 static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
 	{ .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
 };
@@ -213,78 +103,6 @@
 };
 
 /*
- * 'pru-icss' class
- * Programmable Real-Time Unit and Industrial Communication Subsystem
- */
-static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
-	.name	= "pruss",
-};
-
-static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
-	{ .name = "pruss", .rst_shift = 1 },
-};
-
-/* pru-icss */
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod am33xx_pruss_hwmod = {
-	.name		= "pruss",
-	.class		= &am33xx_pruss_hwmod_class,
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.main_clk	= "pruss_ocp_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET,
-			.rstctrl_offs	= AM33XX_RM_PER_RSTCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.rst_lines	= am33xx_pruss_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
-};
-
-/* gfx */
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
-	.name	= "gfx",
-};
-
-static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
-	{ .name = "gfx", .rst_shift = 0, .st_shift = 0},
-};
-
-static struct omap_hwmod am33xx_gfx_hwmod = {
-	.name		= "gfx",
-	.class		= &am33xx_gfx_hwmod_class,
-	.clkdm_name	= "gfx_l3_clkdm",
-	.main_clk	= "gfx_fck_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET,
-			.rstctrl_offs	= AM33XX_RM_GFX_RSTCTRL_OFFSET,
-			.rstst_offs	= AM33XX_RM_GFX_RSTST_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.rst_lines	= am33xx_gfx_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(am33xx_gfx_resets),
-};
-
-/*
- * 'prcm' class
- * power and reset manager (whole prcm infrastructure)
- */
-static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
-	.name	= "prcm",
-};
-
-/* prcm */
-static struct omap_hwmod am33xx_prcm_hwmod = {
-	.name		= "prcm",
-	.class		= &am33xx_prcm_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-};
-
-/*
  * 'adc/tsc' class
  * TouchScreen Controller (Anolog-To-Digital Converter)
  */
@@ -388,79 +206,6 @@
 #endif
 
 /*
- * 'aes0' class
- */
-static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
-	.rev_offs	= 0x80,
-	.sysc_offs	= 0x84,
-	.syss_offs	= 0x88,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
-	.name		= "aes0",
-	.sysc		= &am33xx_aes0_sysc,
-};
-
-static struct omap_hwmod am33xx_aes0_hwmod = {
-	.name		= "aes",
-	.class		= &am33xx_aes0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "aes0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_AES0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
-	.rev_offs	= 0x100,
-	.sysc_offs	= 0x110,
-	.syss_offs	= 0x114,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
-	.name		= "sha0",
-	.sysc		= &am33xx_sha0_sysc,
-};
-
-static struct omap_hwmod am33xx_sha0_hwmod = {
-	.name		= "sham",
-	.class		= &am33xx_sha0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ocmcram */
-static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
-	.name = "ocmcram",
-};
-
-static struct omap_hwmod am33xx_ocmcram_hwmod = {
-	.name		= "ocmcram",
-	.class		= &am33xx_ocmcram_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'debugss' class
  * debug sub system
  */
@@ -488,51 +233,11 @@
 	.opt_clks_cnt	= ARRAY_SIZE(debugss_opt_clks),
 };
 
-/* 'smartreflex' class */
-static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
-	.name		= "smartreflex",
-};
-
-/* smartreflex0 */
-static struct omap_hwmod am33xx_smartreflex0_hwmod = {
-	.name		= "smartreflex0",
-	.class		= &am33xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "smartreflex0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* smartreflex1 */
-static struct omap_hwmod am33xx_smartreflex1_hwmod = {
-	.name		= "smartreflex1",
-	.class		= &am33xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "smartreflex1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'control' module class
- */
-static struct omap_hwmod_class am33xx_control_hwmod_class = {
-	.name		= "control",
-};
-
 static struct omap_hwmod am33xx_control_hwmod = {
 	.name		= "control",
 	.class		= &am33xx_control_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_m4_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -542,288 +247,6 @@
 	},
 };
 
-/*
- * 'cpgmac' class
- * cpsw/cpgmac sub system
- */
-static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x8,
-	.syss_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
-			   MSTANDBY_NO),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
-	.name		= "cpgmac0",
-	.sysc		= &am33xx_cpgmac_sysc,
-};
-
-static struct omap_hwmod am33xx_cpgmac0_hwmod = {
-	.name		= "cpgmac0",
-	.class		= &am33xx_cpgmac0_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "cpsw_125mhz_gclk",
-	.mpu_rt_idx	= 1,
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * mdio class
- */
-static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
-	.name		= "davinci_mdio",
-};
-
-static struct omap_hwmod am33xx_mdio_hwmod = {
-	.name		= "davinci_mdio",
-	.class		= &am33xx_mdio_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.main_clk	= "cpsw_125mhz_gclk",
-};
-
-/*
- * dcan class
- */
-static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
-	.name = "d_can",
-};
-
-/* dcan0 */
-static struct omap_hwmod am33xx_dcan0_hwmod = {
-	.name		= "d_can0",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* dcan1 */
-static struct omap_hwmod am33xx_dcan1_hwmod = {
-	.name		= "d_can1",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* elm */
-static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_elm_hwmod_class = {
-	.name		= "elm",
-	.sysc		= &am33xx_elm_sysc,
-};
-
-static struct omap_hwmod am33xx_elm_hwmod = {
-	.name		= "elm",
-	.class		= &am33xx_elm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_ELM_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pwmss  */
-static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
-	.name		= "epwmss",
-	.sysc		= &am33xx_epwmss_sysc,
-};
-
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
-	.name		= "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
-	.name		= "eqep",
-};
-
-static struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
-	.name		= "ehrpwm",
-};
-
-/* epwmss0 */
-static struct omap_hwmod am33xx_epwmss0_hwmod = {
-	.name		= "epwmss0",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap0 */
-static struct omap_hwmod am33xx_ecap0_hwmod = {
-	.name		= "ecap0",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep0 */
-static struct omap_hwmod am33xx_eqep0_hwmod = {
-	.name		= "eqep0",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-static struct omap_hwmod am33xx_ehrpwm0_hwmod = {
-	.name		= "ehrpwm0",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* epwmss1 */
-static struct omap_hwmod am33xx_epwmss1_hwmod = {
-	.name		= "epwmss1",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap1 */
-static struct omap_hwmod am33xx_ecap1_hwmod = {
-	.name		= "ecap1",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep1 */
-static struct omap_hwmod am33xx_eqep1_hwmod = {
-	.name		= "eqep1",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-static struct omap_hwmod am33xx_ehrpwm1_hwmod = {
-	.name		= "ehrpwm1",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* epwmss2 */
-static struct omap_hwmod am33xx_epwmss2_hwmod = {
-	.name		= "epwmss2",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap2 */
-static struct omap_hwmod am33xx_ecap2_hwmod = {
-	.name		= "ecap2",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep2 */
-static struct omap_hwmod am33xx_eqep2_hwmod = {
-	.name		= "eqep2",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-static struct omap_hwmod am33xx_ehrpwm2_hwmod = {
-	.name		= "ehrpwm2",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/*
- * 'gpio' class: for gpio 0,1,2,3
- */
-static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
-			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
-	.name		= "gpio",
-	.sysc		= &am33xx_gpio_sysc,
-	.rev		= 2,
-};
-
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 /* gpio0 */
 static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio0_dbclk" },
@@ -846,174 +269,6 @@
 	.dev_attr	= &gpio_dev_attr,
 };
 
-/* gpio1 */
-static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio1_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio1_hwmod = {
-	.name		= "gpio2",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio2_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio2_hwmod = {
-	.name		= "gpio3",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio3_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio3_hwmod = {
-	.name		= "gpio4",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpmc */
-static struct omap_hwmod_class_sysconfig gpmc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
-	.name		= "gpmc",
-	.sysc		= &gpmc_sysc,
-};
-
-static struct omap_hwmod am33xx_gpmc_hwmod = {
-	.name		= "gpmc",
-	.class		= &am33xx_gpmc_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3s_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'i2c' class */
-static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0090,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
-	.name		= "i2c",
-	.sysc		= &am33xx_i2c_sysc,
-	.rev		= OMAP_I2C_IP_VERSION_2,
-	.reset		= &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
-/* i2c1 */
-static struct omap_hwmod am33xx_i2c1_hwmod = {
-	.name		= "i2c1",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c1 */
-static struct omap_hwmod am33xx_i2c2_hwmod = {
-	.name		= "i2c2",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4 = {
-			.clkctrl_offs	= AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c3 */
-static struct omap_hwmod am33xx_i2c3_hwmod = {
-	.name		= "i2c3",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-
 /* lcdc */
 static struct omap_hwmod_class_sysconfig lcdc_sysc = {
 	.rev_offs	= 0x0,
@@ -1043,600 +298,6 @@
 };
 
 /*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors using a
- * queued mailbox-interrupt mechanism.
- */
-static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
-	.name	= "mailbox",
-	.sysc	= &am33xx_mailbox_sysc,
-};
-
-static struct omap_hwmod am33xx_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &am33xx_mailbox_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mcasp' class
- */
-static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
-	.name		= "mcasp",
-	.sysc		= &am33xx_mcasp_sysc,
-};
-
-/* mcasp0 */
-static struct omap_hwmod am33xx_mcasp0_hwmod = {
-	.name		= "mcasp0",
-	.class		= &am33xx_mcasp_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mcasp0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* mcasp1 */
-static struct omap_hwmod am33xx_mcasp1_hwmod = {
-	.name		= "mcasp1",
-	.class		= &am33xx_mcasp_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mcasp1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'mmc' class */
-static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
-	.rev_offs	= 0x1fc,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
-	.name		= "mmc",
-	.sysc		= &am33xx_mmc_sysc,
-};
-
-/* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod am33xx_mmc0_hwmod = {
-	.name		= "mmc1",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc0_dev_attr,
-};
-
-/* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod am33xx_mmc1_hwmod = {
-	.name		= "mmc2",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc1_dev_attr,
-};
-
-/* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-static struct omap_hwmod am33xx_mmc2_hwmod = {
-	.name		= "mmc3",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc2_dev_attr,
-};
-
-/*
- * 'rtc' class
- * rtc subsystem
- */
-static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
-	.rev_offs	= 0x0074,
-	.sysc_offs	= 0x0078,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO |
-			  SIDLE_SMART | SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
-	.name		= "rtc",
-	.sysc		= &am33xx_rtc_sysc,
-};
-
-static struct omap_hwmod am33xx_rtc_hwmod = {
-	.name		= "rtc",
-	.class		= &am33xx_rtc_hwmod_class,
-	.clkdm_name	= "l4_rtc_clkdm",
-	.main_clk	= "clk_32768_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'spi' class */
-static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0110,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			  SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_spi_hwmod_class = {
-	.name		= "mcspi",
-	.sysc		= &am33xx_mcspi_sysc,
-	.rev		= OMAP4_MCSPI_REV,
-};
-
-/* spi0 */
-static struct omap2_mcspi_dev_attr mcspi_attrib = {
-	.num_chipselect	= 2,
-};
-static struct omap_hwmod am33xx_spi0_hwmod = {
-	.name		= "spi0",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi_attrib,
-};
-
-/* spi1 */
-static struct omap_hwmod am33xx_spi1_hwmod = {
-	.name		= "spi1",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi_attrib,
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the
- * processes running on multiple processors
- */
-static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
-	.name		= "spinlock",
-};
-
-static struct omap_hwmod am33xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &am33xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'timer 2-7' class */
-static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_timer_hwmod_class = {
-	.name		= "timer",
-	.sysc		= &am33xx_timer_sysc,
-};
-
-/* timer1 1ms */
-static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
-	.name		= "timer",
-	.sysc		= &am33xx_timer1ms_sysc,
-};
-
-static struct omap_hwmod am33xx_timer1_hwmod = {
-	.name		= "timer1",
-	.class		= &am33xx_timer1ms_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "timer1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer2_hwmod = {
-	.name		= "timer2",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer2_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer3_hwmod = {
-	.name		= "timer3",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer3_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer4_hwmod = {
-	.name		= "timer4",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer4_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer5_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer6_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer7_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tpcc */
-static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
-	.name		= "tpcc",
-};
-
-static struct omap_hwmod am33xx_tpcc_hwmod = {
-	.name		= "tpcc",
-	.class		= &am33xx_tpcc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-/* 'tptc' class */
-static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
-	.name		= "tptc",
-	.sysc		= &am33xx_tptc_sysc,
-};
-
-/* tptc0 */
-static struct omap_hwmod am33xx_tptc0_hwmod = {
-	.name		= "tptc0",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc1 */
-static struct omap_hwmod am33xx_tptc1_hwmod = {
-	.name		= "tptc1",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc2 */
-static struct omap_hwmod am33xx_tptc2_hwmod = {
-	.name		= "tptc2",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'uart' class */
-static struct omap_hwmod_class_sysconfig uart_sysc = {
-	.rev_offs	= 0x50,
-	.sysc_offs	= 0x54,
-	.syss_offs	= 0x58,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class uart_class = {
-	.name		= "uart",
-	.sysc		= &uart_sysc,
-};
-
-/* uart1 */
-static struct omap_hwmod am33xx_uart1_hwmod = {
-	.name		= "uart1",
-	.class		= &uart_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart2_hwmod = {
-	.name		= "uart2",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* uart3 */
-static struct omap_hwmod am33xx_uart3_hwmod = {
-	.name		= "uart3",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart4_hwmod = {
-	.name		= "uart4",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart5_hwmod = {
-	.name		= "uart5",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART4_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart6_hwmod = {
-	.name		= "uart6",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART5_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'wd_timer' class */
-static struct omap_hwmod_class_sysconfig wdt_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
-	.name		= "wd_timer",
-	.sysc		= &wdt_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable,
-};
-
-/*
- * XXX: device.c file uses hardcoded name for watchdog timer
- * driver "wd_timer2, so we are also using same name as of now...
- */
-static struct omap_hwmod am33xx_wd_timer1_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &am33xx_wd_timer_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE,
-	.main_clk	= "wdt1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'usb_otg' class
  * high-speed on-the-go universal serial bus (usb_otg) controller
  */
@@ -1690,14 +351,6 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mpu -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
-	.master		= &am33xx_mpu_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "dpll_mpu_m2_ck",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3 main -> l4 hs */
 static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -1706,62 +359,6 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3 main -> l3 s */
-static struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_l3_s_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l4 per/ls */
-static struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l4_ls_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l4 wkup */
-static struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l4_wkup_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> l3 instr */
-static struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_l3_instr_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> prcm */
-static struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
-	.master		= &am33xx_mpu_hwmod,
-	.slave		= &am33xx_prcm_hwmod,
-	.clk		= "dpll_mpu_m2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l3 main*/
-static struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* pru-icss -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
-	.master		= &am33xx_pruss_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* wkup m3 -> l4 wkup */
 static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = {
 	.master		= &am33xx_wkup_m3_hwmod,
@@ -1770,14 +367,6 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* gfx -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
-	.master		= &am33xx_gfx_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4 wkup -> wkup m3 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -1794,14 +383,6 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3 main -> gfx */
-static struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_gfx_hwmod,
-	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main -> debugss */
 static struct omap_hwmod_addr_space am33xx_debugss_addrs[] = {
 	{
@@ -1844,54 +425,6 @@
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 wkup -> rtc */
-static struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
-	.master		= &am33xx_l4_wkup_hwmod,
-	.slave		= &am33xx_rtc_hwmod,
-	.clk		= "clkdiv32k_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per/ls -> DCAN0 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> DCAN1 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> GPIO2 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> gpio3 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> gpio4 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* L4 WKUP -> I2C1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -1933,177 +466,6 @@
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
-	.master		= &am33xx_cpgmac0_hwmod,
-	.slave		= &am33xx_mdio_hwmod,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
-	{
-		.pa_start	= 0x48080000,
-		.pa_end		= 0x48080000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_elm_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_elm_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
-	{
-		.pa_start	= 0x48300000,
-		.pa_end		= 0x48300000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ecap0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_eqep0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ehrpwm0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-
-static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
-	{
-		.pa_start	= 0x48302000,
-		.pa_end		= 0x48302000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ecap1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_eqep1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ehrpwm1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
-	{
-		.pa_start	= 0x48304000,
-		.pa_end		= 0x48304000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss2_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ecap2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_eqep2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ehrpwm2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3s cfg -> gpmc */
-static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
-	{
-		.pa_start	= 0x50000000,
-		.pa_end		= 0x50000000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_gpmc_hwmod,
-	.clk		= "l3s_gclk",
-	.addr		= am33xx_gpmc_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* i2c2 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_i2c2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_i2c3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = {
 	{
 		.pa_start	= 0x4830E000,
@@ -2121,138 +483,6 @@
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x480C8000,
-		.pa_end		= 0x480C8000 + (SZ_4K - 1),
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4 ls -> mailbox */
-static struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mailbox_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mailbox_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> spinlock */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spinlock_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcasp0 */
-static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
-	{
-		.pa_start	= 0x48038000,
-		.pa_end		= 0x48038000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mcasp0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcasp1 */
-static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
-	{
-		.pa_start	= 0x4803C000,
-		.pa_end		= 0x4803C000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mcasp1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mmc0 */
-static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
-	{
-		.pa_start	= 0x48060100,
-		.pa_end		= 0x48060100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mmc0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mmc1 */
-static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
-	{
-		.pa_start	= 0x481d8100,
-		.pa_end		= 0x481d8100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mmc1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 s -> mmc2 */
-static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
-	{
-		.pa_start	= 0x47810100,
-		.pa_end		= 0x47810100 + SZ_64K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_mmc2_hwmod,
-	.clk		= "l3s_gclk",
-	.addr		= am33xx_mmc2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi0 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi1 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> timer1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2261,116 +491,6 @@
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 per -> timer2 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer3 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer4 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer5 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer6 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer6_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer7 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer7_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc */
-static struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tpcc_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc0 */
-static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
-	{
-		.pa_start	= 0x49800000,
-		.pa_end		= 0x49800000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc0_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc1 */
-static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
-	{
-		.pa_start	= 0x49900000,
-		.pa_end		= 0x49900000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc1_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc2 */
-static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
-	{
-		.pa_start	= 0x49a00000,
-		.pa_end		= 0x49a00000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc2_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> uart1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2379,46 +499,6 @@
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 ls -> uart2 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart3 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart4 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart5 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart6 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart6_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> wd_timer1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2437,47 +517,39 @@
 	.flags		= OCPIF_SWSUP_IDLE,
 };
 
-/* l3 main -> ocmc */
-static struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_ocmcram_hwmod,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+/* rng */
+static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = {
+	.rev_offs	= 0x1fe0,
+	.sysc_offs	= 0x1fe4,
+	.sysc_flags	= SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-/* l3 main -> sha0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
-	{
-		.pa_start	= 0x53100000,
-		.pa_end		= 0x53100000 + SZ_512 - 1,
-		.flags		= ADDR_TYPE_RT
+static struct omap_hwmod_class am33xx_rng_hwmod_class = {
+	.name		= "rng",
+	.sysc		= &am33xx_rng_sysc,
+};
+
+static struct omap_hwmod am33xx_rng_hwmod = {
+	.name		= "rng",
+	.class		= &am33xx_rng_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "rng_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_RNG_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
 	},
-	{ }
 };
 
-static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_sha0_hwmod,
-	.clk		= "sha0_fck",
-	.addr		= am33xx_sha0_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> AES0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
-	{
-		.pa_start	= 0x53500000,
-		.pa_end		= 0x53500000 + SZ_1M - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_aes0_hwmod,
-	.clk		= "aes0_fck",
-	.addr		= am33xx_aes0_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_ocp_if am33xx_l4_per__rng = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_rng_hwmod,
+	.clk		= "rng_fck",
+	.user		= OCP_USER_MPU,
 };
 
 static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
@@ -2559,11 +631,13 @@
 	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
 	&am33xx_l3_main__aes0,
+	&am33xx_l4_per__rng,
 	NULL,
 };
 
 int __init am33xx_hwmod_init(void)
 {
+	omap_hwmod_am33xx_reg();
 	omap_hwmod_init();
 	return omap_hwmod_register_links(am33xx_hwmod_ocp_ifs);
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0c3a427..9e56fab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3693,6 +3693,53 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/*
+ * 'ssi' class
+ * synchronous serial interface (multichannel and full-duplex serial if)
+ */
+
+static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+	.name	= "ssi",
+	.sysc	= &omap34xx_ssi_sysc,
+};
+
+static struct omap_hwmod omap34xx_ssi_hwmod = {
+	.name		= "ssi",
+	.class		= &omap34xx_ssi_hwmod_class,
+	.clkdm_name	= "core_l4_clkdm",
+	.main_clk	= "ssi_ssr_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id		= 1,
+			.module_bit		= OMAP3430_EN_SSI_SHIFT,
+			.module_offs		= CORE_MOD,
+			.idlest_reg_id		= 1,
+			.idlest_idle_bit	= OMAP3430ES2_ST_SSI_IDLE_SHIFT,
+		},
+	},
+};
+
+/* L4 CORE -> SSI */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_ssi_hwmod,
+	.clk		= "ssi_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l3_main__l4_core,
 	&omap3xxx_l3_main__l4_per,
@@ -3818,6 +3865,7 @@
 #ifdef CONFIG_OMAP_IOMMU_IVA2
 	&omap3xxx_l3_main__mmu_iva,
 #endif
+	&omap34xx_l4_core__ssi,
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
new file mode 100644
index 0000000..9002fca
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -0,0 +1,758 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Hwmod present only in AM43x and those that differ other than register
+ * offsets as compared to AM335x.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+#include "prcm43xx.h"
+
+/* IP blocks */
+static struct omap_hwmod am43xx_l4_hs_hwmod = {
+	.name		= "l4_hs",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l4hs_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
+	{ .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
+};
+
+static struct omap_hwmod am43xx_wkup_m3_hwmod = {
+	.name		= "wkup_m3",
+	.class		= &am33xx_wkup_m3_hwmod_class,
+	.clkdm_name	= "l4_wkup_aon_clkdm",
+	/* Keep hardreset asserted */
+	.flags		= HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET,
+			.rstctrl_offs	= AM43XX_RM_WKUP_RSTCTRL_OFFSET,
+			.rstst_offs	= AM43XX_RM_WKUP_RSTST_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_wkup_m3_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_wkup_m3_resets),
+};
+
+static struct omap_hwmod am43xx_control_hwmod = {
+	.name		= "control",
+	.class		= &am33xx_control_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio0_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio0_hwmod = {
+	.name		= "gpio1",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio0_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio0_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_synctimer_hwmod_class = {
+	.name	= "synctimer",
+	.sysc	= &am43xx_synctimer_sysc,
+};
+
+static struct omap_hwmod am43xx_synctimer_hwmod = {
+	.name		= "counter_32k",
+	.class		= &am43xx_synctimer_hwmod_class,
+	.clkdm_name	= "l4_wkup_aon_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "synctimer_32kclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer8_hwmod = {
+	.name		= "timer8",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer8_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer9_hwmod = {
+	.name		= "timer9",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer9_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer10_hwmod = {
+	.name		= "timer10",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer10_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer11_hwmod = {
+	.name		= "timer11",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer11_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_epwmss3_hwmod = {
+	.name		= "epwmss3",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
+	.name		= "ehrpwm3",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_epwmss4_hwmod = {
+	.name		= "epwmss4",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
+	.name		= "ehrpwm4",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_epwmss5_hwmod = {
+	.name		= "epwmss5",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
+	.name		= "ehrpwm5",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_spi2_hwmod = {
+	.name		= "spi2",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod am43xx_spi3_hwmod = {
+	.name		= "spi3",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod am43xx_spi4_hwmod = {
+	.name		= "spi4",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio4_hwmod = {
+	.name		= "gpio5",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio5_hwmod = {
+	.name		= "gpio6",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+};
+
+static struct omap_hwmod am43xx_ocp2scp0_hwmod = {
+	.name		= "ocp2scp0",
+	.class		= &am43xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &am43xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
+				SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+				SIDLE_SMART_WKUP | MSTANDBY_FORCE |
+				MSTANDBY_NO | MSTANDBY_SMART |
+				MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_usb_otg_ss_hwmod_class = {
+	.name	= "usb_otg_ss",
+	.sysc	= &am43xx_usb_otg_ss_sysc,
+};
+
+static struct omap_hwmod am43xx_usb_otg_ss0_hwmod = {
+	.name		= "usb_otg_ss0",
+	.class		= &am43xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
+	.name		= "usb_otg_ss1",
+	.class		= &am43xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = {
+	.sysc_offs      = 0x0010,
+	.sysc_flags     = SYSC_HAS_SIDLEMODE,
+	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+				SIDLE_SMART_WKUP),
+	.sysc_fields    = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_qspi_hwmod_class = {
+	.name   = "qspi",
+	.sysc   = &am43xx_qspi_sysc,
+};
+
+static struct omap_hwmod am43xx_qspi_hwmod = {
+	.name           = "qspi",
+	.class          = &am43xx_qspi_hwmod_class,
+	.clkdm_name     = "l3s_clkdm",
+	.main_clk       = "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* Interfaces */
+static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am43xx_l4_hs_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_wkup_m3__l4_wkup = {
+	.master		= &am43xx_wkup_m3_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_wkup_m3_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_main__pruss = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_pruss_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex0_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_control_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__i2c1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_i2c1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_gpio0_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = {
+	.master		= &am43xx_l4_hs_hwmod,
+	.slave		= &am33xx_cpgmac0_hwmod,
+	.clk		= "cpsw_125mhz_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_timer1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__uart1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_uart1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_wd_timer1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_synctimer_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer8 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer8_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer9 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer9_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer10 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer10_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer11 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer11_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
+	.master		= &am43xx_epwmss3_hwmod,
+	.slave		= &am43xx_ehrpwm3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
+	.master		= &am43xx_epwmss4_hwmod,
+	.slave		= &am43xx_ehrpwm4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
+	.master		= &am43xx_epwmss5_hwmod,
+	.slave		= &am43xx_ehrpwm5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_gpio4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_gpio5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_ocp2scp0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_ocp2scp1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_usb_otg_ss0_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_usb_otg_ss1_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_qspi_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
+	&am33xx_l4_wkup__synctimer,
+	&am43xx_l4_ls__timer8,
+	&am43xx_l4_ls__timer9,
+	&am43xx_l4_ls__timer10,
+	&am43xx_l4_ls__timer11,
+	&am43xx_l4_ls__epwmss3,
+	&am43xx_epwmss3__ehrpwm3,
+	&am43xx_l4_ls__epwmss4,
+	&am43xx_epwmss4__ehrpwm4,
+	&am43xx_l4_ls__epwmss5,
+	&am43xx_epwmss5__ehrpwm5,
+	&am43xx_l4_ls__mcspi2,
+	&am43xx_l4_ls__mcspi3,
+	&am43xx_l4_ls__mcspi4,
+	&am43xx_l4_ls__gpio4,
+	&am43xx_l4_ls__gpio5,
+	&am43xx_l3_main__pruss,
+	&am33xx_mpu__l3_main,
+	&am33xx_mpu__prcm,
+	&am33xx_l3_s__l4_ls,
+	&am33xx_l3_s__l4_wkup,
+	&am43xx_l3_main__l4_hs,
+	&am33xx_l3_main__l3_s,
+	&am33xx_l3_main__l3_instr,
+	&am33xx_l3_main__gfx,
+	&am33xx_l3_s__l3_main,
+	&am33xx_pruss__l3_main,
+	&am43xx_wkup_m3__l4_wkup,
+	&am33xx_gfx__l3_main,
+	&am43xx_l4_wkup__wkup_m3,
+	&am43xx_l4_wkup__control,
+	&am43xx_l4_wkup__smartreflex0,
+	&am43xx_l4_wkup__smartreflex1,
+	&am43xx_l4_wkup__uart1,
+	&am43xx_l4_wkup__timer1,
+	&am43xx_l4_wkup__i2c1,
+	&am43xx_l4_wkup__gpio0,
+	&am43xx_l4_wkup__wd_timer1,
+	&am43xx_l3_s__qspi,
+	&am33xx_l4_per__dcan0,
+	&am33xx_l4_per__dcan1,
+	&am33xx_l4_per__gpio1,
+	&am33xx_l4_per__gpio2,
+	&am33xx_l4_per__gpio3,
+	&am33xx_l4_per__i2c2,
+	&am33xx_l4_per__i2c3,
+	&am33xx_l4_per__mailbox,
+	&am33xx_l4_ls__mcasp0,
+	&am33xx_l4_ls__mcasp1,
+	&am33xx_l4_ls__mmc0,
+	&am33xx_l4_ls__mmc1,
+	&am33xx_l3_s__mmc2,
+	&am33xx_l4_ls__timer2,
+	&am33xx_l4_ls__timer3,
+	&am33xx_l4_ls__timer4,
+	&am33xx_l4_ls__timer5,
+	&am33xx_l4_ls__timer6,
+	&am33xx_l4_ls__timer7,
+	&am33xx_l3_main__tpcc,
+	&am33xx_l4_ls__uart2,
+	&am33xx_l4_ls__uart3,
+	&am33xx_l4_ls__uart4,
+	&am33xx_l4_ls__uart5,
+	&am33xx_l4_ls__uart6,
+	&am33xx_l4_ls__elm,
+	&am33xx_l4_ls__epwmss0,
+	&am33xx_epwmss0__ecap0,
+	&am33xx_epwmss0__eqep0,
+	&am33xx_epwmss0__ehrpwm0,
+	&am33xx_l4_ls__epwmss1,
+	&am33xx_epwmss1__ecap1,
+	&am33xx_epwmss1__eqep1,
+	&am33xx_epwmss1__ehrpwm1,
+	&am33xx_l4_ls__epwmss2,
+	&am33xx_epwmss2__ecap2,
+	&am33xx_epwmss2__eqep2,
+	&am33xx_epwmss2__ehrpwm2,
+	&am33xx_l3_s__gpmc,
+	&am33xx_l4_ls__mcspi0,
+	&am33xx_l4_ls__mcspi1,
+	&am33xx_l3_main__tptc0,
+	&am33xx_l3_main__tptc1,
+	&am33xx_l3_main__tptc2,
+	&am33xx_l3_main__ocmc,
+	&am43xx_l4_hs__cpgmac0,
+	&am33xx_cpgmac0__mdio,
+	&am33xx_l3_main__sha0,
+	&am33xx_l3_main__aes0,
+	&am43xx_l4_ls__ocp2scp0,
+	&am43xx_l4_ls__ocp2scp1,
+	&am43xx_l3_s__usbotgss0,
+	&am43xx_l3_s__usbotgss1,
+	NULL,
+};
+
+int __init am43xx_hwmod_init(void)
+{
+	omap_hwmod_am43xx_reg();
+	omap_hwmod_init();
+	return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 9c3b504..1e5b12c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -914,7 +914,7 @@
 	.name		= "emif1",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -930,7 +930,7 @@
 	.name		= "emif2",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -2193,7 +2193,7 @@
 	.name		= "mpu",
 	.class		= &omap44xx_mpu_hwmod_class,
 	.clkdm_name	= "mpuss_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index cde4155..9e08d699 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -352,7 +352,7 @@
 	.name		= "emif1",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -368,7 +368,7 @@
 	.name		= "emif2",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -1135,7 +1135,7 @@
 	.name		= "mpu",
 	.class		= &omap54xx_mpu_hwmod_class,
 	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {
@@ -1146,6 +1146,77 @@
 };
 
 /*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the processes
+ * running on multiple processors
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_spinlock_hwmod_class = {
+	.name	= "spinlock",
+	.sysc	= &omap54xx_spinlock_sysc,
+};
+
+/* spinlock */
+static struct omap_hwmod omap54xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &omap54xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+	.sysc	= &omap54xx_ocp2scp_sysc,
+};
+
+/* ocp2scp1 */
+static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &omap54xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'timer' class
  * general purpose timer module with accurate 1ms tick
  * This class contains several variants: ['timer_1ms', 'timer']
@@ -1465,6 +1536,123 @@
 };
 
 /*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = {
+	.name	= "usb_host_hs",
+	.sysc	= &omap54xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap54xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
+	.main_clk	= "l3init_60m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = {
+	.name	= "usb_tll_hs",
+	.sysc	= &omap54xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap54xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'usb_otg_ss' class
  * 2.0 super speed (usb_otg_ss) controller
  */
@@ -1960,6 +2148,22 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__spinlock = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_spinlock_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> ocp2scp1 */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_ocp2scp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
 	.master		= &omap54xx_l4_wkup_hwmod,
@@ -2096,6 +2300,22 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> usb_host_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_host_hs_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> usb_tll_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_tll_hs_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_cfg -> usb_otg_ss */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = {
 	.master		= &omap54xx_l4_cfg_hwmod,
@@ -2163,6 +2383,8 @@
 	&omap54xx_l4_per__mmc4,
 	&omap54xx_l4_per__mmc5,
 	&omap54xx_l4_cfg__mpu,
+	&omap54xx_l4_cfg__spinlock,
+	&omap54xx_l4_cfg__ocp2scp1,
 	&omap54xx_l4_wkup__timer1,
 	&omap54xx_l4_per__timer2,
 	&omap54xx_l4_per__timer3,
@@ -2180,6 +2402,8 @@
 	&omap54xx_l4_per__uart4,
 	&omap54xx_l4_per__uart5,
 	&omap54xx_l4_per__uart6,
+	&omap54xx_l4_cfg__usb_host_hs,
+	&omap54xx_l4_cfg__usb_tll_hs,
 	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_wkup__wd_timer2,
 	NULL,
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index bd41d59..82fd8c7 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -17,6 +17,7 @@
  * GNU General Public License for more details.
  */
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/opp.h>
 #include <linux/cpu.h>
 
@@ -40,6 +41,9 @@
 {
 	int i, r;
 
+	if (of_have_populated_dt())
+		return -EINVAL;
+
 	if (!opp_def || !opp_def_size) {
 		pr_err("%s: invalid params!\n", __func__);
 		return -EINVAL;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
new file mode 100644
index 0000000..10c7145
--- /dev/null
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -0,0 +1,174 @@
+/*
+ * Legacy platform_data quirks
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/wl12xx.h>
+
+#include <linux/platform_data/pinctrl-single.h>
+
+#include "common.h"
+#include "common-board-devices.h"
+#include "dss-common.h"
+#include "control.h"
+
+struct pdata_init {
+	const char *compatible;
+	void (*fn)(void);
+};
+
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init __used legacy_init_ehci_clk(char *clkname)
+{
+	int ret;
+
+	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+	if (ret)
+		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+		       __func__, clkname, ret);
+}
+
+#if IS_ENABLED(CONFIG_WL12XX)
+
+static struct wl12xx_platform_data wl12xx __initdata;
+
+static void __init __used legacy_init_wl12xx(unsigned ref_clock,
+					     unsigned tcxo_clock,
+					     int gpio)
+{
+	int res;
+
+	wl12xx.board_ref_clock = ref_clock;
+	wl12xx.board_tcxo_clock = tcxo_clock;
+	wl12xx.irq = gpio_to_irq(gpio);
+
+	res = wl12xx_set_platform_data(&wl12xx);
+	if (res) {
+		pr_err("error setting wl12xx data: %d\n", res);
+		return;
+	}
+}
+#else
+static inline void legacy_init_wl12xx(unsigned ref_clock,
+				      unsigned tcxo_clock,
+				      int gpio)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static void __init hsmmc2_internal_input_clk(void)
+{
+	u32 reg;
+
+	reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
+	reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+	omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
+}
+
+static void __init omap3_igep0020_legacy_init(void)
+{
+	omap3_igep2_display_init_of();
+}
+
+static void __init omap3_evm_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
+}
+
+static void __init omap3_zoom_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#ifdef CONFIG_ARCH_OMAP4
+static void __init omap4_sdp_legacy_init(void)
+{
+	omap_4430sdp_display_init_of();
+	legacy_init_wl12xx(WL12XX_REFCLOCK_26,
+			   WL12XX_TCXOCLOCK_26, 53);
+}
+
+static void __init omap4_panda_legacy_init(void)
+{
+	omap4_panda_display_init_of();
+	legacy_init_ehci_clk("auxclk3_ck");
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+static void __init omap5_uevm_legacy_init(void)
+{
+	legacy_init_ehci_clk("auxclk1_ck");
+}
+#endif
+
+static struct pcs_pdata pcs_pdata;
+
+void omap_pcs_legacy_init(int irq, void (*rearm)(void))
+{
+	pcs_pdata.irq = irq;
+	pcs_pdata.rearm = rearm;
+}
+
+struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
+#ifdef CONFIG_ARCH_OMAP3
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
+#endif
+	{ /* sentinel */ },
+};
+
+static struct pdata_init pdata_quirks[] __initdata = {
+#ifdef CONFIG_ARCH_OMAP3
+	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
+	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
+	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
+	{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
+	{ "ti,omap4-panda", omap4_panda_legacy_init, },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
+#endif
+	{ /* sentinel */ },
+};
+
+void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
+{
+	struct pdata_init *quirks = pdata_quirks;
+
+	omap_sdrc_init(NULL, NULL);
+	of_platform_populate(NULL, omap_dt_match_table,
+			     omap_auxdata_lookup, NULL);
+
+	while (quirks->compatible) {
+		if (of_machine_is_compatible(quirks->compatible)) {
+			if (quirks->fn)
+				quirks->fn();
+			break;
+		}
+		quirks++;
+	}
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e742118..360b2da 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -266,7 +266,12 @@
 
 static inline void omap_init_cpufreq(void)
 {
-	struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+	struct platform_device_info devinfo = { };
+
+	if (!of_have_populated_dt())
+		devinfo.name = "omap-cpufreq";
+	else
+		devinfo.name = "cpufreq-cpu0";
 	platform_device_register_full(&devinfo);
 }
 
@@ -300,10 +305,11 @@
 		/* Smartreflex device init */
 		omap_devinit_smartreflex();
 
-		/* cpufreq dummy device instantiation */
-		omap_init_cpufreq();
 	}
 
+	/* cpufreq dummy device instantiation */
+	omap_init_cpufreq();
+
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index ce956b0..8c07594 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -62,16 +62,6 @@
 
 static struct clk *osc_ck, *emul_ck;
 
-static int omap2_fclks_active(void)
-{
-	u32 f1, f2;
-
-	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-
-	return (f1 | f2) ? 1 : 0;
-}
-
 static int omap2_enter_full_retention(void)
 {
 	u32 l;
@@ -142,17 +132,7 @@
 
 static int omap2_allow_mpu_retention(void)
 {
-	u32 l;
-
-	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
-		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
-		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
-		return 0;
-	/* Check for UART3. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-	if (l & OMAP24XX_EN_UART3_MASK)
+	if (!omap2xxx_cm_mpu_retention_allowed())
 		return 0;
 	if (sti_console_enabled)
 		return 0;
@@ -188,7 +168,7 @@
 
 static int omap2_can_sleep(void)
 {
-	if (omap2_fclks_active())
+	if (omap2xxx_cm_fclks_active())
 		return 0;
 	if (__clk_is_enabled(osc_ck))
 		return 0;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 5a2d803..93b80e5 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -430,8 +430,7 @@
 			 OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Set IVA2 boot mode to 'idle' */
-	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
-			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap3_ctrl_set_iva_bootmode_idle();
 
 	/* Un-reset IVA2 */
 	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index baf3d8b..da5a59a 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -257,6 +257,7 @@
 extern void omap44xx_powerdomains_init(void);
 extern void omap54xx_powerdomains_init(void);
 extern void dra7xx_powerdomains_init(void);
+void am43xx_powerdomains_init(void);
 
 extern struct pwrdm_ops omap2_pwrdm_operations;
 extern struct pwrdm_ops omap3_pwrdm_operations;
diff --git a/arch/arm/mach-omap2/powerdomains43xx_data.c b/arch/arm/mach-omap2/powerdomains43xx_data.c
new file mode 100644
index 0000000..95fee54
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains43xx_data.c
@@ -0,0 +1,136 @@
+/*
+ * AM43xx Power domains framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+
+#include "prcm-common.h"
+#include "prcm44xx.h"
+#include "prcm43xx.h"
+
+static struct powerdomain gfx_43xx_pwrdm = {
+	.name		  = "gfx_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_GFX_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* gfx_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain mpu_43xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.voltdm		  = { .name = "mpu" },
+	.prcm_offs	  = AM43XX_PRM_MPU_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l1 */
+		[1] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[2] = PWRSTS_OFF_RET,	/* mpu_ram */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* mpu_l1 */
+		[1] = PWRSTS_ON,	/* mpu_l2 */
+		[2] = PWRSTS_ON,	/* mpu_ram */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain rtc_43xx_pwrdm = {
+	.name		  = "rtc_pwrdm",
+	.voltdm		  = { .name = "rtc" },
+	.prcm_offs	  = AM43XX_PRM_RTC_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+static struct powerdomain wkup_43xx_pwrdm = {
+	.name		  = "wkup_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_WKUP_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+	.banks		  = 1,
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* debugss_mem */
+	},
+};
+
+static struct powerdomain tamper_43xx_pwrdm = {
+	.name		  = "tamper_pwrdm",
+	.voltdm		  = { .name = "tamper" },
+	.prcm_offs	  = AM43XX_PRM_TAMPER_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+static struct powerdomain cefuse_43xx_pwrdm = {
+	.name		  = "cefuse_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_CEFUSE_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain per_43xx_pwrdm = {
+	.name		  = "per_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_PER_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 4,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* icss_mem */
+		[1] = PWRSTS_OFF_RET,	/* per_mem */
+		[2] = PWRSTS_OFF_RET,	/* ram1_mem */
+		[3] = PWRSTS_OFF_RET,	/* ram2_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* icss_mem */
+		[1] = PWRSTS_ON,	/* per_mem */
+		[2] = PWRSTS_ON,	/* ram1_mem */
+		[3] = PWRSTS_ON,	/* ram2_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain *powerdomains_am43xx[] __initdata = {
+	&gfx_43xx_pwrdm,
+	&mpu_43xx_pwrdm,
+	&rtc_43xx_pwrdm,
+	&wkup_43xx_pwrdm,
+	&tamper_43xx_pwrdm,
+	&cefuse_43xx_pwrdm,
+	&per_43xx_pwrdm,
+	NULL
+};
+
+static int am43xx_check_vcvp(void)
+{
+	return 0;
+}
+
+void __init am43xx_powerdomains_init(void)
+{
+	omap4_pwrdm_operations.pwrdm_has_voltdm = am43xx_check_vcvp;
+	pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+	pwrdm_register_pwrdms(powerdomains_am43xx);
+	pwrdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
new file mode 100644
index 0000000..7785be9
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -0,0 +1,146 @@
+/*
+ * AM43x PRCM defines
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
+
+#define AM43XX_PRM_PARTITION				1
+#define AM43XX_CM_PARTITION				1
+
+/* PRM instances */
+#define AM43XX_PRM_OCP_SOCKET_INST			0x0000
+#define AM43XX_PRM_MPU_INST				0x0300
+#define AM43XX_PRM_GFX_INST				0x0400
+#define AM43XX_PRM_RTC_INST				0x0500
+#define AM43XX_PRM_TAMPER_INST				0x0600
+#define AM43XX_PRM_CEFUSE_INST				0x0700
+#define AM43XX_PRM_PER_INST				0x0800
+#define AM43XX_PRM_WKUP_INST				0x2000
+#define AM43XX_PRM_DEVICE_INST				0x4000
+
+/* RM RSTCTRL offsets */
+#define AM43XX_RM_PER_RSTCTRL_OFFSET			0x0010
+#define AM43XX_RM_GFX_RSTCTRL_OFFSET			0x0010
+#define AM43XX_RM_WKUP_RSTCTRL_OFFSET			0x0010
+
+/* RM RSTST offsets */
+#define AM43XX_RM_GFX_RSTST_OFFSET			0x0014
+#define AM43XX_RM_WKUP_RSTST_OFFSET			0x0014
+
+/* CM instances */
+#define AM43XX_CM_WKUP_INST				0x2800
+#define AM43XX_CM_DEVICE_INST				0x4100
+#define AM43XX_CM_DPLL_INST				0x4200
+#define AM43XX_CM_MPU_INST				0x8300
+#define AM43XX_CM_GFX_INST				0x8400
+#define AM43XX_CM_RTC_INST				0x8500
+#define AM43XX_CM_TAMPER_INST				0x8600
+#define AM43XX_CM_CEFUSE_INST				0x8700
+#define AM43XX_CM_PER_INST				0x8800
+
+/* CD offsets */
+#define AM43XX_CM_WKUP_L3_AON_CDOFFS			0x0000
+#define AM43XX_CM_WKUP_L3S_TSC_CDOFFS			0x0100
+#define AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS		0x0200
+#define AM43XX_CM_WKUP_WKUP_CDOFFS			0x0300
+#define AM43XX_CM_MPU_MPU_CDOFFS			0x0000
+#define AM43XX_CM_GFX_GFX_L3_CDOFFS			0x0000
+#define AM43XX_CM_RTC_RTC_CDOFFS			0x0000
+#define AM43XX_CM_TAMPER_TAMPER_CDOFFS			0x0000
+#define AM43XX_CM_CEFUSE_CEFUSE_CDOFFS			0x0000
+#define AM43XX_CM_PER_L3_CDOFFS				0x0000
+#define AM43XX_CM_PER_L3S_CDOFFS			0x0200
+#define AM43XX_CM_PER_ICSS_CDOFFS			0x0300
+#define AM43XX_CM_PER_L4LS_CDOFFS			0x0400
+#define AM43XX_CM_PER_EMIF_CDOFFS			0x0700
+#define AM43XX_CM_PER_DSS_CDOFFS			0x0a00
+#define AM43XX_CM_PER_CPSW_CDOFFS			0x0b00
+#define AM43XX_CM_PER_OCPWP_L3_CDOFFS			0x0c00
+
+/* CLK CTRL offsets */
+#define AM43XX_CM_PER_UART1_CLKCTRL_OFFSET		0x0580
+#define AM43XX_CM_PER_UART2_CLKCTRL_OFFSET		0x0588
+#define AM43XX_CM_PER_UART3_CLKCTRL_OFFSET		0x0590
+#define AM43XX_CM_PER_UART4_CLKCTRL_OFFSET		0x0598
+#define AM43XX_CM_PER_UART5_CLKCTRL_OFFSET		0x05a0
+#define AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET		0x0428
+#define AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET		0x0430
+#define AM43XX_CM_PER_ELM_CLKCTRL_OFFSET		0x0468
+#define AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET		0x0438
+#define AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET		0x0440
+#define AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET		0x0448
+#define AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET		0x0478
+#define AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET		0x0480
+#define AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET		0x0488
+#define AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET		0x04a8
+#define AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET		0x04b0
+#define AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET		0x04b8
+#define AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET		0x04c0
+#define AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET		0x04c8
+#define AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET		0x0500
+#define AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET		0x0508
+#define AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET		0x0528
+#define AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET		0x0530
+#define AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET		0x0538
+#define AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET		0x0540
+#define AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET		0x0548
+#define AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET		0x0550
+#define AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET		0x0558
+#define AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET		0x0228
+#define AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET		0x0360
+#define AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET	0x0350
+#define AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET	0x0358
+#define AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET		0x0348
+#define AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0328
+#define AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET		0x0340
+#define AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET		0x0368
+#define AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET		0x0120
+#define AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0338
+#define AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0220
+#define AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET		0x0248
+#define AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET               0x0258
+#define AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET		0x0220
+#define AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET		0x0238
+#define AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET		0x0240
+#define AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET		0x0420
+#define AM43XX_CM_PER_L3_CLKCTRL_OFFSET			0x0020
+#define AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET		0x0078
+#define AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET		0x0080
+#define AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET		0x0088
+#define AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET		0x0090
+#define AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET		0x0b20
+#define AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET		0x0320
+#define AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET		0x00a0
+#define AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET		0x0040
+#define AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET		0x0050
+#define AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET		0x0058
+#define AM43XX_CM_PER_AES0_CLKCTRL_OFFSET		0x0028
+#define AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET		0x0560
+#define AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET		0x0568
+#define AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET		0x0570
+#define AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET		0x0578
+#define AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0230
+#define AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET		0x0450
+#define AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET		0x0458
+#define AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET		0x0460
+#define AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET		0x0510
+#define AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET		0x0518
+#define AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET		0x0520
+#define AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET		0x0490
+#define AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET		0x0498
+#define AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET	0x0260
+#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET	0x05B8
+#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET        0x0268
+#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET	0x05C0
+
+#endif
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 277f717..f8eb833 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -144,7 +144,13 @@
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern void omap3xxx_prm_reconfigure_io_chain(void);
+#ifdef CONFIG_ARCH_OMAP3
+void omap3xxx_prm_reconfigure_io_chain(void);
+#else
+static inline void omap3xxx_prm_reconfigure_io_chain(void)
+{
+}
+#endif
 
 /* PRM interrupt-related functions */
 extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7cd22ab..a085d9c 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -42,7 +42,13 @@
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern void omap44xx_prm_reconfigure_io_chain(void);
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+void omap44xx_prm_reconfigure_io_chain(void);
+#else
+static inline void omap44xx_prm_reconfigure_io_chain(void)
+{
+}
+#endif
 
 /* PRM interrupt-related functions */
 extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 228b850..a2e1174 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
+#include "soc.h"
 #include "prm2xxx_3xxx.h"
 #include "prm2xxx.h"
 #include "prm3xxx.h"
@@ -322,6 +323,16 @@
 		prcm_irq_chips[i] = gc;
 	}
 
+	if (of_have_populated_dt()) {
+		int irq = omap_prcm_event_to_irq("io");
+		if (cpu_is_omap34xx())
+			omap_pcs_legacy_init(irq,
+				omap3xxx_prm_reconfigure_io_chain);
+		else
+			omap_pcs_legacy_init(irq,
+				omap44xx_prm_reconfigure_io_chain);
+	}
+
 	return 0;
 
 err:
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 4588df1..076bd90 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -455,9 +455,7 @@
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
 #define OMAP54XX_CLASS		0x54000054
-#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
 #define OMAP5430_REV_ES2_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
-#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
 #define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index ead48fa..3ca81e0 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -55,6 +55,7 @@
 #include "soc.h"
 #include "common.h"
 #include "powerdomain.h"
+#include "omap-secure.h"
 
 #define REALTIME_COUNTER_BASE				0x48243200
 #define INCREMENTER_NUMERATOR_OFFSET			0x10
@@ -66,6 +67,15 @@
 static struct omap_dm_timer clkev;
 static struct clock_event_device clockevent_gpt;
 
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
+static unsigned long arch_timer_freq;
+
+void set_cntfreq(void)
+{
+	omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
+}
+#endif
+
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_gpt;
@@ -78,7 +88,7 @@
 
 static struct irqaction omap2_gp_timer_irq = {
 	.name		= "gp_timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap2_gp_timer_interrupt,
 };
 
@@ -515,6 +525,10 @@
 		num = 8;
 		den = 25;
 		break;
+	case 20000000:
+		num = 192;
+		den = 625;
+		break;
 	case 2600000:
 		num = 384;
 		den = 1625;
@@ -542,6 +556,9 @@
 	reg |= den;
 	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
 
+	arch_timer_freq = (rate / den) * num;
+	set_cntfreq();
+
 	iounmap(base);
 }
 #else
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index c05898f..b0d54da 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/gpio.h>
 #include <linux/string.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
@@ -90,8 +91,18 @@
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
+struct phy_consumer consumers[] = {
+	PHY_CONSUMER("musb-hdrc.0", "usb"),
+};
+
+struct phy_init_data init_data = {
+	.consumers = consumers,
+	.num_consumers = ARRAY_SIZE(consumers),
+};
+
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,
+	.init_data	= &init_data,
 };
 
 static int omap3_batt_table[] = {
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index e83a6a4..10855eb 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -435,6 +435,7 @@
 	struct platform_device *pdev;
 	char *phy_id;
 	struct platform_device_info pdevinfo;
+	struct usb_phy_gen_xceiv_platform_data nop_pdata;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -455,11 +456,18 @@
 			return -ENOMEM;
 		}
 
+		/* set platform data */
+		memset(&nop_pdata, 0, sizeof(nop_pdata));
+		if (gpio_is_valid(phy->vcc_gpio))
+			nop_pdata.needs_vcc = true;
+		nop_pdata.gpio_reset = phy->reset_gpio;
+		nop_pdata.type = USB_PHY_TYPE_USB2;
+
 		/* create a NOP PHY device */
 		memset(&pdevinfo, 0, sizeof(pdevinfo));
 		pdevinfo.name = nop_name;
 		pdevinfo.id = phy->port;
-		pdevinfo.data = phy->platform_data;
+		pdevinfo.data = &nop_pdata;
 		pdevinfo.size_data =
 			sizeof(struct usb_phy_gen_xceiv_platform_data);
 		scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
@@ -474,14 +482,6 @@
 
 		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
 
-		/* Do we need RESET regulator ? */
-		if (gpio_is_valid(phy->reset_gpio)) {
-			scnprintf(rail_name, MAX_STR,
-					"hsusb%d_reset", phy->port);
-			usbhs_add_regulator(rail_name, phy_id, "reset",
-						phy->reset_gpio, 1);
-		}
-
 		/* Do we need VCC regulator ? */
 		if (gpio_is_valid(phy->vcc_gpio)) {
 			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index e7261eb..4ba2ae7 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -58,7 +58,6 @@
 	int reset_gpio;
 	int vcc_gpio;
 	bool vcc_polarity;	/* 1 active high, 0 active low */
-	void *platform_data;
 };
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index e110b6d..d49aff7 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <asm/sizes.h>
@@ -21,13 +20,6 @@
 	sirfsoc_pm_init();
 }
 
-static __init void sirfsoc_init_time(void)
-{
-	/* initialize clocking early, we want to set the OS timer */
-	sirfsoc_of_clk_init();
-	clocksource_of_init();
-}
-
 static __init void sirfsoc_map_io(void)
 {
 	sirfsoc_map_lluart();
@@ -43,7 +35,6 @@
 DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = atlas6_dt_match,
 	.restart	= sirfsoc_restart,
@@ -59,7 +50,6 @@
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.dma_zone_size	= SZ_256M,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = prima2_dt_match,
@@ -77,7 +67,6 @@
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.smp            = smp_ops(sirfsoc_smp_ops),
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = marco_dt_match,
 	.restart	= sirfsoc_restart,
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index a630485..4b76806 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -23,7 +23,6 @@
 extern void sirfsoc_cpu_die(unsigned int cpu);
 
 extern void __init sirfsoc_of_irq_init(void);
-extern void __init sirfsoc_of_clk_init(void);
 extern void sirfsoc_restart(enum reboot_mode, const char *);
 extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
 
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 25ee12b..cf073de 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -5,12 +5,13 @@
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select CACHE_L2X0
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
-	select LOCAL_TIMERS if SMP
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select DW_APB_TIMER_OF
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	help
 	  Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs
 	  containing the RK2928, RK30xx and RK31xx series.
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 724d2d8..82c0b07 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -19,18 +19,10 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
-#include <linux/dw_apb_timer.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 
-static void __init rockchip_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void __init rockchip_dt_init(void)
 {
 	l2x0_of_init(0, ~0UL);
@@ -47,6 +39,5 @@
 
 DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.init_machine	= rockchip_dt_init,
-	.init_time	= rockchip_timer_init,
 	.dt_compat	= rockchip_board_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index dba2173..8f1d327 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,6 +28,7 @@
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
 	select SAMSUNG_WDT_RESET
@@ -70,6 +71,7 @@
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
@@ -148,7 +150,6 @@
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
 	help
 	  DMA device selection for S3C2410 and compatible CPUs
 
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index d8f253f..11b3b28 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -484,22 +484,22 @@
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA3,
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index f6b9f2e..65d3eef 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -438,32 +438,32 @@
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA3,
 	}, {
-		.name		= "dma",
+		.name		= "dma.4",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA4,
 	}, {
-		.name		= "dma",
+		.name		= "dma.5",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 457261c..4adaa4b 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -31,6 +31,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -44,6 +45,7 @@
 
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
+#include <mach/dma.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -329,3 +331,207 @@
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
 }
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
+static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2410_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2410_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2410_dma_platdata,
+	},
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2412_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2412_device_dma = {
+	.name		= "s3c2412-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2412_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(6, 1) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
+						   S3C24XX_DMA_CHANREQ(0, 2),
+	},
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
+						  S3C24XX_DMA_CHANREQ(5, 2),
+	},
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
+						  S3C24XX_DMA_CHANREQ(6, 3),
+	},
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
+						  S3C24XX_DMA_CHANREQ(5, 3),
+	},
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2440_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2440_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2440_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+	.num_phy_channels = 6,
+	.channels = s3c2443_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2443_device_dma = {
+	.name		= "s3c2443-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
+	.resource	= s3c2443_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2443_dma_platdata,
+	},
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 84b2806..e46c1041 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -109,4 +109,9 @@
 
 extern struct syscore_ops s3c24xx_irq_syscore_ops;
 
+extern struct platform_device s3c2410_device_dma;
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2440_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index a45fcd8..43c23e2 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -466,6 +466,7 @@
 	&jive_device_wm8750,
 	&s3c_device_nand,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 8146e92..c9d31ef 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -89,6 +89,7 @@
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index cb46847..f88e672 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -215,6 +215,7 @@
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_usb_hsudc,
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2416_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 9435c3b..d9933fc 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -115,6 +115,7 @@
 #ifdef CONFIG_SND_SOC_SMDK2443_WM9710
 	&s3c_device_ac97,
 #endif
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2443_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index b665884..f7ec9c5 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -126,6 +126,7 @@
 	&s3c_device_iis,
 	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c2412_device_dma,
 };
 
 static void __init vstms_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 041da51..2cb8dc5 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -3,16 +3,7 @@
 #
 # Licensed under GPLv2
 
-# temporary until we can eliminate all drivers using it.
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select PM_GENERIC_DOMAINS
-	select SAMSUNG_WAKEMASK
-	help
-	  Base platform code for any Samsung S3C64XX device
-
+if ARCH_S3C64XX
 
 # Configuration options for the S3C6410 CPU
 
@@ -306,3 +297,21 @@
 	select SAMSUNG_GPIO_EXTRA128
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+	select CLKSRC_OF
+	select CPU_S3C6400
+	select CPU_S3C6410
+	select PINCTRL
+	select PINCTRL_S3C64XX
+	select USE_OF
+	help
+	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+	  enabled.
+	  Select this if a fdt blob is available for your S3C64XX SoC based
+	  board.
+	  Note: This is under development and not all peripherals can be
+	  supported with this machine file.
+
+endif
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c91..6faedcf 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@
 
 # Core
 
-obj-y				+= common.o clock.o
+obj-y				+= common.o
 
 # Core support
 
@@ -57,3 +57,4 @@
 obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
+obj-$(CONFIG_MACH_S3C64XX_DT)		+= mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index c1bcc4a6..0000000
--- a/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-#include "regs-sys.h"
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
-	.name		= "xusbxti",
-	.rate		= 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.devname        = "s3c2440-i2c.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C6410_CLKCON_PCLK_I2C1,
-	}, {
-		.name		= "keypad",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
-	}, {
-		.name		= "dma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	}, {
-		.name		= "3dse",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_3DSE,
-	}, {
-		.name		= "hclk_secur",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SECUR,
-	}, {
-		.name		= "sdma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA1,
-	}, {
-		.name		= "sdma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA0,
-	}, {
-		.name		= "hclk_jpeg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_JPEG,
-	}, {
-		.name		= "camif",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_CAMIF,
-	}, {
-		.name		= "hclk_scaler",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SCALER,
-	}, {
-		.name		= "2d",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_2D,
-	}, {
-		.name		= "tv",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_TV,
-	}, {
-		.name		= "post0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_POST0,
-	}, {
-		.name		= "rot",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_ROT,
-	}, {
-		.name		= "hclk_mfc",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_MFC,
-	}, {
-		.name		= "pclk_mfc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_MFC,
-	}, {
-		.name		= "dac27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_DAC27,
-	}, {
-		.name		= "tv27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_TV27,
-	}, {
-		.name		= "scaler27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER27,
-	}, {
-		.name		= "sclk_scaler",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER,
-	}, {
-		.name		= "post0_27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_POST0_27,
-	}, {
-		.name		= "secur",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SECUR,
-	}, {
-		.name		= "sclk_mfc",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MFC,
-	}, {
-		.name		= "sclk_jpeg",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_JPEG,
-	},
-};
-
-static struct clk clk_48m_spi0 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.0",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.1",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk clk_i2s0 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.0",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-};
-
-static struct clk clk_i2s1 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.1",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk clk_i2s2 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.2",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
-};
-#endif
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "otg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_USB,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	},
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c64xx_clk_arm_get_rate,
-		.set_rate	= s3c64xx_clk_arm_set_rate,
-		.round_rate	= s3c64xx_clk_arm_round_rate,
-	},
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.parent		= &clk_mout_mpll.clk,
-	.ops		= &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
-	.name		= "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk *clkset_audio2_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iisv4_cd,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-#endif
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "usb-bus-host",
-			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
-		.sources	= &clkset_uhost,
-	}, {
-		.clk	= {
-			.name		= "irda-bus",
-			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
-		.sources	= &clkset_irda,
-	}, {
-		.clk	= {
-			.name		= "camera",
-			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-			.enable		= s3c64xx_sclk_ctrl,
-			.parent		= &clk_h2,
-		},
-		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
-	},
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
-	.sources	= &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_audio_bus0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
-	.sources	= &clkset_audio0,
-};
-
-static struct clksrc_clk clk_audio_bus1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
-	.sources	= &clkset_audio1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clksrc_clk clk_audio_bus2 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.2",
-		.ctrlbit	= S3C6410_CLKCON_SCLK_AUDIO2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4  },
-	.sources	= &clkset_audio2,
-};
-#endif
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uclk,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_audio_bus0,
-	&clk_audio_bus1,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_48m_spi0,
-	&clk_48m_spi1,
-	&clk_i2s0,
-	&clk_i2s1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
-#ifdef CONFIG_CPU_S3C6410
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
-#endif
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
-		/* Synchronous mode */
-		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	else
-		/* Asynchronous mode */
-		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iisv4_cd,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-	&clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal, 
-				    unsigned armclk_divlimit)
-{
-	unsigned int cnt;
-
-	armclk_mask = armclk_divlimit;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
-		s3c_disable_clocks(clk_cdev[cnt], 1);
-
-	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
-		s3c_register_clksrc(clksrc_cdev[cnt], 1);
-	clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 73d79cf..7a3ce4c 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -14,9 +14,14 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/clk-provider.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
@@ -38,7 +43,6 @@
 #include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/gpio-cfg.h>
@@ -50,6 +54,19 @@
 
 #include "common.h"
 
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+	xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+	xusbxti_f = freq;
+}
+
 /* uart registration process */
 
 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -67,7 +84,6 @@
 		.idcode		= S3C6400_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
@@ -75,7 +91,6 @@
 		.idcode		= S3C6410_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6410_init,
 		.name		= name_s3c6410,
@@ -192,6 +207,10 @@
 
 static __init int s3c64xx_dev_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	subsys_system_register(&s3c64xx_subsys, NULL);
 	return device_register(&s3c64xx_dev);
 }
@@ -213,8 +232,10 @@
 {
 	/*
 	 * FIXME: there is no better place to put this at the moment
-	 * (samsung_wdt_reset_init needs clocks)
+	 * (s3c64xx_clk_init needs ioremap and must happen before init_time
+	 * samsung_wdt_reset_init needs clocks)
 	 */
+	s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
 	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
@@ -391,6 +412,10 @@
 {
 	int irq;
 
+	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
 		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
 		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b..bd3bd56 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,21 +22,21 @@
 void s3c64xx_init_irq(u32 vic0, u32 vic1);
 void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
 void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
 void s3c64xx_init_late(void);
 
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+	unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
 extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
 
 #else
-#define s3c6400_init_clocks NULL
 #define s3c6400_map_io NULL
 #define s3c6400_init NULL
 #endif
@@ -46,10 +46,8 @@
 extern  int s3c6410_init(void);
 extern void s3c6410_init_irq(void);
 extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
 
 #else
-#define s3c6410_init_clocks NULL
 #define s3c6410_map_io NULL
 #define s3c6410_init NULL
 #endif
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 759846c..7e22c21 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -12,6 +12,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -24,6 +28,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/amba/pl080.h>
+#include <linux/of.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
@@ -677,7 +682,7 @@
 		goto err_map;
 	}
 
-	clk_enable(dmac->clk);
+	clk_prepare_enable(dmac->clk);
 
 	dmac->regs = regs;
 	dmac->chanbase = chbase;
@@ -711,7 +716,7 @@
 	return 0;
 
 err_clk:
-	clk_disable(dmac->clk);
+	clk_disable_unprepare(dmac->clk);
 	clk_put(dmac->clk);
 err_map:
 	iounmap(regs);
@@ -726,6 +731,10 @@
 {
 	int ret;
 
+	/* This driver is not supported when booting with device tree. */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 
 	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 05332b9..4f44aac 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -15,145 +15,21 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
+/*
+ * FIXME: Remove remaining definitions
+ */
+
 #define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
 
-#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
-#define S3C_APLL_CON		S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON		S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
-#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
-#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 #define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
 #define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
 
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
-#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
-#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
-#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-
-#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE	(1<<31)
-#define S3C_CLKCON_HCLK_UHOST	(1<<29)
-#define S3C_CLKCON_HCLK_SECUR	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
-#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
-#define S3C_CLKCON_HCLK_IROM	(1<<25)
-#define S3C_CLKCON_HCLK_DDR1	(1<<24)
-#define S3C_CLKCON_HCLK_DDR0	(1<<23)
-#define S3C_CLKCON_HCLK_MEM1	(1<<22)
-#define S3C_CLKCON_HCLK_MEM0	(1<<21)
-#define S3C_CLKCON_HCLK_USB	(1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
-#define S3C_CLKCON_HCLK_MDP	(1<<16)
-#define S3C_CLKCON_HCLK_DHOST	(1<<15)
-#define S3C_CLKCON_HCLK_IHOST	(1<<14)
-#define S3C_CLKCON_HCLK_DMA1	(1<<13)
-#define S3C_CLKCON_HCLK_DMA0	(1<<12)
-#define S3C_CLKCON_HCLK_JPEG	(1<<11)
-#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
-#define S3C_CLKCON_HCLK_SCALER	(1<<9)
-#define S3C_CLKCON_HCLK_2D	(1<<8)
-#define S3C_CLKCON_HCLK_TV	(1<<7)
-#define S3C_CLKCON_HCLK_POST0	(1<<5)
-#define S3C_CLKCON_HCLK_ROT	(1<<4)
-#define S3C_CLKCON_HCLK_LCD	(1<<3)
-#define S3C_CLKCON_HCLK_TZIC	(1<<2)
-#define S3C_CLKCON_HCLK_INTC	(1<<1)
-#define S3C_CLKCON_HCLK_MFC	(1<<0)
-
 /* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
-#define S3C_CLKCON_PCLK_SKEY		(1<<24)
-#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
-#define S3C_CLKCON_PCLK_SPI1		(1<<22)
-#define S3C_CLKCON_PCLK_SPI0		(1<<21)
-#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
-#define S3C_CLKCON_PCLK_HSITX		(1<<19)
-#define S3C_CLKCON_PCLK_GPIO		(1<<18)
-#define S3C_CLKCON_PCLK_IIC		(1<<17)
-#define S3C_CLKCON_PCLK_IIS1		(1<<16)
-#define S3C_CLKCON_PCLK_IIS0		(1<<15)
-#define S3C_CLKCON_PCLK_AC97		(1<<14)
-#define S3C_CLKCON_PCLK_TZPC		(1<<13)
-#define S3C_CLKCON_PCLK_TSADC		(1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
-#define S3C_CLKCON_PCLK_IRDA		(1<<10)
-#define S3C_CLKCON_PCLK_PCM1		(1<<9)
-#define S3C_CLKCON_PCLK_PCM0		(1<<8)
-#define S3C_CLKCON_PCLK_PWM		(1<<7)
-#define S3C_CLKCON_PCLK_RTC		(1<<6)
-#define S3C_CLKCON_PCLK_WDT		(1<<5)
 #define S3C_CLKCON_PCLK_UART3		(1<<4)
 #define S3C_CLKCON_PCLK_UART2		(1<<3)
 #define S3C_CLKCON_PCLK_UART1		(1<<2)
 #define S3C_CLKCON_PCLK_UART0		(1<<1)
-#define S3C_CLKCON_PCLK_MFC		(1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST		(1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
-#define S3C_CLKCON_SCLK_MMC2		(1<<26)
-#define S3C_CLKCON_SCLK_MMC1		(1<<25)
-#define S3C_CLKCON_SCLK_MMC0		(1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
-#define S3C_CLKCON_SCLK_SPI1		(1<<21)
-#define S3C_CLKCON_SCLK_SPI0		(1<<20)
-#define S3C_CLKCON_SCLK_DAC27		(1<<19)
-#define S3C_CLKCON_SCLK_TV27		(1<<18)
-#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
-#define S3C_CLKCON_SCLK_SCALER		(1<<16)
-#define S3C_CLKCON_SCLK_LCD27		(1<<15)
-#define S3C_CLKCON_SCLK_LCD		(1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
-#define S3C6410_CLKCON_FIMC		(1<<13)
-#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
-#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
-#define S3C_CLKCON_SCLK_POST0		(1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
-#define S3C_CLKCON_SCLK_SECUR		(1<<7)
-#define S3C_CLKCON_SCLK_IRDA		(1<<6)
-#define S3C_CLKCON_SCLK_UART		(1<<5)
-#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
-#define S3C_CLKCON_SCLK_MFC		(1<<3)
-#define S3C_CLKCON_SCLK_CAM		(1<<2)
-#define S3C_CLKCON_SCLK_JPEG		(1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
-#define S3C6400_CLKSRC_MFC		(1 << 4)
 
 /* MEM_SYS_CFG */
 #define MEM_SYS_CFG_INDEP_CF		0x4000
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index c3da1b6..1649c0d 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -12,12 +12,17 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 
 #include <mach/map.h>
 
@@ -101,6 +106,10 @@
 
 static __init int s3c64xx_syscore_init(void)
 {
+	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	register_syscore_ops(&s3c64xx_irq_syscore_ops);
 
 	return 0;
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54..d266dd5 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@
 static void __init anw6410_map_io(void)
 {
 	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index eb8e5a1..1a911df 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -743,7 +743,7 @@
 static void __init crag6410_map_io(void)
 {
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index f39569e..e806404 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -247,7 +247,7 @@
 static void __init hmt_map_io(void)
 {
 	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fc043e3..58d46a3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@
 	u32 tmp;
 
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c390..2067b0b 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@
 static void __init ncp_map_io(void)
 {
 	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
new file mode 100644
index 0000000..7eb9a10
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's S3C64XX flattened device tree enabled machine
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include <plat/cpu.h>
+#include <plat/watchdog-reset.h>
+
+#include <mach/map.h>
+
+#include "common.h"
+
+/*
+ * IO mapping for shared system controller IP.
+ *
+ * FIXME: Make remaining drivers use dynamic mapping.
+ */
+static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
+
+	s3c64xx_init_cpu();
+
+	if (!soc_is_s3c64xx())
+		panic("SoC is not S3C64xx!");
+}
+
+static void __init s3c64xx_dt_init_irq(void)
+{
+	of_clk_init(NULL);
+	samsung_wdt_reset_of_init();
+	irqchip_init();
+};
+
+static void __init s3c64xx_dt_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (mode != REBOOT_SOFT)
+		samsung_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	soft_restart(0);
+}
+
+static char const *s3c64xx_dt_compat[] __initdata = {
+	"samsung,s3c6400",
+	"samsung,s3c6410",
+	NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+	/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
+	.dt_compat	= s3c64xx_dt_compat,
+	.map_io		= s3c64xx_dt_map_io,
+	.init_irq	= s3c64xx_dt_init_irq,
+	.init_machine	= s3c64xx_dt_init_machine,
+	.restart        = s3c64xx_dt_restart,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 86d980b..0f47237 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -337,13 +337,6 @@
 	return ret;
 }
 
-static int __init smartq_usb_otg_init(void)
-{
-	clk_xusbxti.rate = 12000000;
-
-	return 0;
-}
-
 static int __init smartq_wifi_init(void)
 {
 	int ret;
@@ -377,7 +370,8 @@
 void __init smartq_map_io(void)
 {
 	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
+	s3c64xx_set_xusbxti_freq(12000000);
 	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -399,7 +393,6 @@
 	WARN_ON(smartq_lcd_setup_gpio());
 	WARN_ON(smartq_power_off_init());
 	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_usb_otg_init());
 	WARN_ON(smartq_wifi_init());
 
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c084..27381cf 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@
 static void __init smdk6400_map_io(void)
 {
 	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d90b450..2a7b32c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -634,7 +634,7 @@
 	u32 tmp;
 
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 6a1f91f..8cdb824 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,29 +194,8 @@
 #endif
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C_APLL_LOCK),
-	SAVE_ITEM(S3C_MPLL_LOCK),
-	SAVE_ITEM(S3C_EPLL_LOCK),
-	SAVE_ITEM(S3C_CLK_SRC),
-	SAVE_ITEM(S3C_CLK_DIV0),
-	SAVE_ITEM(S3C_CLK_DIV1),
-	SAVE_ITEM(S3C_CLK_DIV2),
-	SAVE_ITEM(S3C_CLK_OUT),
-	SAVE_ITEM(S3C_HCLK_GATE),
-	SAVE_ITEM(S3C_PCLK_GATE),
-	SAVE_ITEM(S3C_SCLK_GATE),
-	SAVE_ITEM(S3C_MEM0_GATE),
-
-	SAVE_ITEM(S3C_EPLL_CON1),
-	SAVE_ITEM(S3C_EPLL_CON0),
-
 	SAVE_ITEM(S3C64XX_MEM0DRVCON),
 	SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C_APLL_CON),
-	SAVE_ITEM(S3C_MPLL_CON),
-#endif
 };
 
 static struct sleep_save misc_save[] = {
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714..3db0c98 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -9,6 +9,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -20,6 +24,7 @@
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -58,12 +63,6 @@
 	s3c64xx_onenand1_setname("s3c6400-onenand");
 }
 
-void __init s3c6400_init_clocks(int xtal)
-{
-	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6400_init_irq(void)
 {
 	/* VIC0 does not have IRQS 5..7,
@@ -82,6 +81,10 @@
 
 static int __init s3c6400_core_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	return subsys_system_register(&s3c6400_subsys, NULL);
 }
 
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fd..72b2278 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -10,6 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -21,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -62,13 +67,6 @@
 	s3c_cfcon_setname("s3c64xx-pata");
 }
 
-void __init s3c6410_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6410_init_irq(void)
 {
 	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
@@ -86,6 +84,10 @@
 
 static int __init s3c6410_core_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	return subsys_system_register(&s3c6410_subsys, NULL);
 }
 
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 032de66..e345584 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -147,10 +147,6 @@
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
deleted file mode 100644
index 2965718..0000000
--- a/arch/arm/mach-shark/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o dma.o irq.o pci.o leds.o
-obj-m			:=
-obj-n			:=
-obj-			:=
diff --git a/arch/arm/mach-shark/Makefile.boot b/arch/arm/mach-shark/Makefile.boot
deleted file mode 100644
index e40e24e..0000000
--- a/arch/arm/mach-shark/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x08008000
-
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
deleted file mode 100644
index 1d32c5e..0000000
--- a/arch/arm/mach-shark/core.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/arch.c
- *
- *  Architecture specific stuff.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/cpu.h>
-#include <linux/reboot.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/param.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#define ROMCARD_SIZE            0x08000000
-#define ROMCARD_START           0x10000000
-
-static void shark_restart(enum reboot_mode mode, const char *cmd)
-{
-        short temp;
-        /* Reset the Machine via pc[3] of the sequoia chipset */
-        outw(0x09,0x24);
-        temp=inw(0x26);
-        temp = temp | (1<<3) | (1<<10);
-        outw(0x09,0x24);
-        outw(temp,0x26);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= 4,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= 3,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= 0x70,
-		.end	= 0x73,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= IRQ_ISA_RTC_ALARM,
-		.end	= IRQ_ISA_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static int __init shark_init(void)
-{
-	int ret;
-
-	if (machine_is_shark())
-	{
-	        ret = platform_device_register(&rtc_device);
-		if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
-		ret = platform_device_register(&serial_device);
-		if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
-	}
-	return 0;
-}
-
-arch_initcall(shark_init);
-
-extern void shark_init_irq(void);
-
-#define IRQ_TIMER 0
-#define HZ_TIME ((1193180 + HZ/2) / HZ)
-
-static irqreturn_t
-shark_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction shark_timer_irq = {
-	.name		= "Shark Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= shark_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init shark_timer_init(void)
-{
-	outb(0x34, 0x43);               /* binary, mode 0, LSB/MSB, Ch 0 */
-	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
-	outb(HZ_TIME >> 8, 0x40);
-
-	setup_irq(IRQ_TIMER, &shark_timer_irq);
-}
-
-static void shark_init_early(void)
-{
-	cpu_idle_poll_ctrl(true);
-}
-
-MACHINE_START(SHARK, "Shark")
-	/* Maintainer: Alexander Schulz */
-	.atag_offset	= 0x3000,
-	.init_early	= shark_init_early,
-	.init_irq	= shark_init_irq,
-	.init_time	= shark_timer_init,
-	.dma_zone_size	= SZ_4M,
-	.restart	= shark_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
deleted file mode 100644
index 10b5b8b..0000000
--- a/arch/arm/mach-shark/dma.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/dma.c
- *
- *  by Alexander Schulz
- *
- *  derived from:
- *  arch/arm/kernel/dma-ebsa285.c
- *  Copyright (C) 1998 Phil Blundell
- */
-
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-static int __init shark_dma_init(void)
-{
-#ifdef CONFIG_ISA_DMA
-	isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(shark_dma_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
deleted file mode 100644
index d129119..0000000
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-shark/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x3f8
-		orr	\rv, \rp, #0xfe000000
-		orr	\rv, \rv, #0x00e00000
-		orr	\rp, \rp, #0x40000000
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
deleted file mode 100644
index c9e49f0..0000000
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0x20]	@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [\base, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0xa0]	@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [\base, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
deleted file mode 100644
index 84a5bf6..0000000
--- a/arch/arm/mach-shark/include/mach/framebuffer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/framebuffer.h
- *
- * by Alexander Schulz
- *
- */
-
-#ifndef __ASM_ARCH_FRAMEBUFFER_H
-#define __ASM_ARCH_FRAMEBUFFER_H
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
deleted file mode 100644
index 663f952..0000000
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
deleted file mode 100644
index c8e8a4e..0000000
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define IRQ_ISA_RTC_ALARM	 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
deleted file mode 100644
index 96c43b8..0000000
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/isa-dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
deleted file mode 100644
index 1cf8d69..0000000
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET     UL(0x08000000)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
deleted file mode 100644
index bb6eeae..0000000
--- a/arch/arm/mach-shark/include/mach/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
deleted file mode 100644
index a168435..0000000
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-footbridge/include/mach/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	volatile int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
deleted file mode 100644
index 5dce13e..0000000
--- a/arch/arm/mach-shark/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/irq.c
- *
- * by Alexander Schulz
- *
- * derived from linux/arch/ppc/kernel/i8259.c and:
- * arch/arm/mach-ebsa110/include/mach/irq.h
- * Copyright (C) 1996-1998 Russell King
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
- */
-static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
-
-/*
- * These have to be protected by the irq controller spinlock
- * before being called.
- */
-static void shark_disable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = 1 << d->irq;
-	  cached_irq_mask[0] |= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	} else {
-	  mask = 1 << (d->irq-8);
-	  cached_irq_mask[1] |= mask;
-	  outb(cached_irq_mask[0],0x21);
-	}
-}
-
-static void shark_enable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = ~(1 << d->irq);
-	  cached_irq_mask[0] &= mask;
-	  outb(cached_irq_mask[0],0x21);
-	} else {
-	  mask = ~(1 << (d->irq-8));
-	  cached_irq_mask[1] &= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	}
-}
-
-static void shark_ack_8259A_irq(struct irq_data *d){}
-
-static irqreturn_t bogus_int(int irq, void *dev_id)
-{
-	printk("Got interrupt %i!\n",irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cascade;
-
-static struct irq_chip fb_chip = {
-	.name		= "XT-PIC",
-	.irq_ack	= shark_ack_8259A_irq,
-	.irq_mask	= shark_disable_8259A_irq,
-	.irq_unmask	= shark_enable_8259A_irq,
-};
-
-void __init shark_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
-	outb(0x0A, 0x20);
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence, edge triggered */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
-	outb(0x0A, 0xA0);
-	outb(cached_irq_mask[1],0xA1);
-	outb(cached_irq_mask[0],0x21);
-	//request_region(0x20,0x2,"pic1");
-	//request_region(0xA0,0x2,"pic2");
-
-	cascade.handler = bogus_int;
-	cascade.name = "cascade";
-	setup_irq(2,&cascade);
-}
-
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
deleted file mode 100644
index 081c778..0000000
--- a/arch/arm/mach-shark/leds.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * DIGITAL Shark LED control routines.
- *
- * Driver for the 3 user LEDs found on the Shark
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct shark_led {
-	struct led_classdev cdev;
-	u8 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} shark_leds[] = {
-	{ "shark:amber0", "default-on", },	/* Bit 5 */
-	{ "shark:green", "heartbeat", },	/* Bit 6 */
-	{ "shark:amber1", "cpu0" },		/* Bit 7 */
-};
-
-static u16 led_reg_read(void)
-{
-	outw(0x09, 0x24);
-	return inw(0x26);
-}
-
-static void led_reg_write(u16 value)
-{
-	outw(0x09, 0x24);
-	outw(value, 0x26);
-}
-
-static void shark_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	led_reg_write(reg);
-}
-
-static enum led_brightness shark_led_get(struct led_classdev *cdev)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init shark_leds_init(void)
-{
-	int i;
-	u16 reg;
-
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
-		struct shark_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = shark_leds[i].name;
-		led->cdev.brightness_set = shark_led_set;
-		led->cdev.brightness_get = shark_led_get;
-		led->cdev.default_trigger = shark_leds[i].trigger;
-
-		/* Count in 5 bits offset */
-		led->mask = BIT(i + 5);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	/* Make LEDs independent of power-state */
-	request_region(0x24, 4, "led_reg");
-	reg = led_reg_read();
-	reg |= 1 << 10;
-	led_reg_write(reg);
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(shark_leds_init);
-#endif
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
deleted file mode 100644
index 6d91a91..0000000
--- a/arch/arm/mach-shark/pci.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/pci.c
- *
- *  PCI bios-type initialisation for PCI machines
- *
- *  Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define IO_START	0x40000000
-
-static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0)
-		if (dev->devfn == 0)
-			return 255;
-		else
-			return 11;
-	else
-		return 255;
-}
-
-extern void __init via82c505_preinit(void);
-
-static struct hw_pci shark_pci __initdata = {
-	.setup		= via82c505_setup,
-	.map_irq	= shark_map_irq,
-	.nr_controllers = 1,
-	.ops		= &via82c505_ops,
-	.preinit	= via82c505_preinit,
-};
-
-static int __init shark_pci_init(void)
-{
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	pcibios_min_io = 0x6000;
-	pcibios_min_mem = 0x50000000;
-	vga_base = 0xe8000000;
-
-	pci_ioremap_io(0, IO_START);
-
-	pci_common_init(&shark_pci);
-
-	return 0;
-}
-
-subsys_initcall(shark_pci_init);
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 1f94c31..a4a4b75 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -22,16 +22,10 @@
 
 comment "SH-Mobile Board Type"
 
-config MACH_KZM9D_REFERENCE
-	bool "KZM9D board - Reference Device Tree Implementation"
+config MACH_KZM9D
+	bool "KZM9D board"
 	depends on ARCH_EMEV2
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	---help---
-	   Use reference implementation of KZM9D board support
-	   which makes a greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
 
 comment "SH-Mobile System Configuration"
 endif
@@ -101,12 +95,24 @@
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
+config ARCH_R8A7791
+	bool "R-Car M2 (R8A77910)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
+
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 
+config ARCH_R7S72100
+	bool "RZ/A1H (R7S72100)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
+
 comment "SH-Mobile Board Type"
 
 config MACH_APE6EVM
@@ -162,6 +168,8 @@
 	select RENESAS_INTC_IRQPIN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
+	select SND_SOC_AK4554 if SND_SIMPLE_CARD
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 config MACH_BOCKW_REFERENCE
 	bool "BOCK-W  - Reference Device Tree Implementation"
@@ -177,6 +185,11 @@
 
 	   This is intended to aid developers
 
+config MACH_GENMAI
+	bool "Genmai board"
+	depends on ARCH_R7S72100
+	select USE_OF
+
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
@@ -213,24 +226,17 @@
 
 	   This is intended to aid developers
 
+config MACH_KOELSCH
+	bool "Koelsch board"
+	depends on ARCH_R8A7791
+	select USE_OF
+
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 
-config MACH_KZM9D_REFERENCE
-	bool "KZM9D board - Reference Device Tree Implementation"
-	depends on ARCH_EMEV2
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
-	---help---
-	   Use reference implementation of KZM9D board support
-	   which makes a greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2705bfa..51db2bc 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -15,7 +15,10 @@
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o setup-rcar-gen2.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
 # Clock objects
 ifndef CONFIG_COMMON_CLK
@@ -27,13 +30,17 @@
 obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
 obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
 endif
 
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7790)	+= smp-r8a7790.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7791)	+= smp-r8a7791.o platsmp-apmu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # IRQ objects
@@ -48,21 +55,26 @@
 obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
+ifdef CONFIG_ARCH_SHMOBILE_MULTI
+obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
+else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
+obj-$(CONFIG_MACH_GENMAI)	+= board-genmai.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
+obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
-obj-$(CONFIG_MACH_KZM9D_REFERENCE)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
+endif
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 6a504fe..391d72a 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -6,8 +6,9 @@
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
+loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
+loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
-loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a23fa71..3276afc 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -57,7 +57,7 @@
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 24b87eea..0fa068e 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -86,7 +86,7 @@
 	GPIO_KEY(KEY_VOLUMEDOWN,	329,	"S21"),
 };
 
-static struct __initdata gpio_keys_platform_data ape6evm_keys_pdata = {
+static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = {
 	.buttons	= gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
 };
@@ -113,22 +113,58 @@
 };
 
 /*
- * On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we
- * model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the
- * static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also
- * supplied by the same tps80032 regulator and thus can also be adjusted
- * dynamically.
+ * MMC0 power supplies:
+ * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage
+ * regulator. Until support for it is added to this file we simulate the
+ * Vcc supply by a fixed always-on regulator
  */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+static struct regulator_consumer_supply vcc_mmc0_consumers[] =
 {
 	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+};
+
+/*
+ * SDHI0 power supplies:
+ * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is
+ * provided by the same tps80032 regulator as both MMC0 voltages - see comment
+ * above
+ */
+static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
+{
 	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data vcc_sdhi0_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
+	.consumer_supplies      = vcc_sdhi0_consumers,
+};
+
+static const struct fixed_voltage_config vcc_sdhi0_info __initconst = {
+	.supply_name = "SDHI0 Vcc",
+	.microvolts = 3300000,
+	.gpio = 76,
+	.enable_high = 1,
+	.init_data = &vcc_sdhi0_init_data,
+};
+
+/*
+ * SDHI1 power supplies:
+ * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V
+ */
+static struct regulator_consumer_supply vcc_sdhi1_consumers[] =
+{
 	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
 };
 
 /* MMCIF */
 static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = {
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF0_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF0_RX,
+	.ccs_unsupported = true,
 };
 
 static const struct resource mmcif0_resources[] __initconst = {
@@ -215,14 +251,19 @@
 	platform_device_register_resndata(&platform_bus, "smsc911x", -1,
 					  lan9220_res, ARRAY_SIZE(lan9220_res),
 					  &lan9220_data, sizeof(lan9220_data));
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers,
+				     ARRAY_SIZE(vcc_mmc0_consumers), 2800000);
 	platform_device_register_resndata(&platform_bus, "sh_mmcif", 0,
 					  mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
 					  &mmcif0_pdata, sizeof(mmcif0_pdata));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2,
+				      &vcc_sdhi0_info, sizeof(vcc_sdhi0_info));
 	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
 					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
 					  &sdhi0_pdata, sizeof(sdhi0_pdata));
+	regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers,
+				     ARRAY_SIZE(vcc_sdhi1_consumers), 3300000);
 	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
 					  sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
 					  &sdhi1_pdata, sizeof(sdhi1_pdata));
@@ -240,7 +281,7 @@
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 7f8f607..8bc8e4c 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -823,6 +823,7 @@
 	.caps		= MMC_CAP_4_BIT_DATA |
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NONREMOVABLE,
+	.ccs_unsupported = true,
 	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
 	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index 1a7c893..ae88fda 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -36,15 +36,35 @@
 				  "scif0_ctrl", "scif0"),
 };
 
+#define FPGA	0x18200000
+#define IRQ0MR	0x30
+#define COMCTLR	0x101c
 static void __init bockw_init(void)
 {
+	static void __iomem *fpga;
+
 	r8a7778_clock_init();
+	r8a7778_init_irq_extpin_dt(1);
 
 	pinctrl_register_mappings(bockw_pinctrl_map,
 				  ARRAY_SIZE(bockw_pinctrl_map));
 	r8a7778_pinmux_init();
 	r8a7778_add_dt_devices();
 
+	fpga = ioremap_nocache(FPGA, SZ_1M);
+	if (fpga) {
+		/*
+		 * CAUTION
+		 *
+		 * IRQ0/1 is cascaded interrupt from FPGA.
+		 * it should be cared in the future
+		 * Now, it is assuming IRQ0 was used only from SMSC.
+		 */
+		u16 val = ioread16(fpga + IRQ0MR);
+		val &= ~(1 << 4); /* enable SMSC911x */
+		iowrite16(val, fpga + IRQ0MR);
+	}
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 6b9faf3..38611526 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -32,11 +32,19 @@
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/usb/renesas_usbhs.h>
 #include <media/soc_camera.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
 #include <asm/mach/arch.h>
+#include <sound/rcar_snd.h>
+#include <sound/simple_card.h>
+
+#define FPGA	0x18200000
+#define IRQ0MR	0x30
+#define COMCTLR	0x101c
+static void __iomem *fpga;
 
 /*
  *	CN9(Upper side) SCIF/RCAN selection
@@ -63,6 +71,45 @@
  * SW19	(MMC)	1 pin
  */
 
+/*
+ *	SSI settings
+ *
+ * SW45: 1-4 side	(SSI5 out, ROUT/LOUT CN19 Mid)
+ * SW46: 1101		(SSI6 Recorde)
+ * SW47: 1110		(SSI5 Playback)
+ * SW48: 11		(Recorde power)
+ * SW49: 1		(SSI slave mode)
+ * SW50: 1111		(SSI7, SSI8)
+ * SW51: 1111		(SSI3, SSI4)
+ * SW54: 1pin		(ak4554 FPGA control)
+ * SW55: 1		(CLKB is 24.5760MHz)
+ * SW60: 1pin		(ak4554 FPGA control)
+ * SW61: 3pin		(use X11 clock)
+ * SW78: 3-6		(ak4642 connects I2C0)
+ *
+ * You can use sound as
+ *
+ * hw0: CN19: SSI56-AK4643
+ * hw1: CN21: SSI3-AK4554(playback)
+ * hw2: CN21: SSI4-AK4554(capture)
+ * hw3: CN20: SSI7-AK4554(playback)
+ * hw4: CN20: SSI8-AK4554(capture)
+ *
+ * this command is required when playback on hw0.
+ *
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
+
+/*
+ * USB
+ *
+ * USB1 (CN29) can be Host/Function
+ *
+ *		Host	Func
+ * SW98		1	2
+ * SW99		1	3
+ */
+
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vddvario", "smsc911x"),
@@ -81,16 +128,76 @@
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
+#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
+/*
+ * When USB1 is Func
+ */
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+#define SUSPMODE	0x102
+static int usbhsf_power_ctrl(struct platform_device *pdev,
+			     void __iomem *base, int enable)
+{
+	enable = !!enable;
+
+	r8a7778_usb_phy_power(enable);
+
+	iowrite16(enable << 14, base + SUSPMODE);
+
+	return 0;
+}
+
+static struct resource usbhsf_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe60000, 0x110),
+	DEFINE_RES_IRQ(gic_iid(0x4f)),
+};
+
+static struct renesas_usbhs_platform_info usbhs_info __initdata = {
+	.platform_callback = {
+		.get_id		= usbhsf_get_id,
+		.power_ctrl	= usbhsf_power_ctrl,
+	},
+	.driver_param = {
+		.buswait_bwait	= 4,
+	},
+};
+
+#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
+#define USB1_DEVICE	"renesas_usbhs"
+#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()			\
+	platform_device_register_resndata(			\
+		&platform_bus, "renesas_usbhs", -1,		\
+		usbhsf_resources,				\
+		ARRAY_SIZE(usbhsf_resources),			\
+		&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
+
+#else
+/*
+ * When USB1 is Host
+ */
+#define USB_PHY_SETTING { }
+#define USB1_DEVICE	"ehci-platform"
+#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
+
+#endif
+
 /* USB */
 static struct resource usb_phy_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffe70800, 0x100),
 	DEFINE_RES_MEM(0xffe76000, 0x100),
 };
 
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
+static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
+	USB_PHY_SETTING;
+
 
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.dma_slave_tx	= HPBDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= HPBDMA_SLAVE_SDHI0_RX,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
@@ -101,6 +208,12 @@
 	DEFINE_RES_IRQ(gic_iid(0x77)),
 };
 
+/* Ether */
+static struct resource ether_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfde00000, 0x400),
+	DEFINE_RES_IRQ(gic_iid(0x89)),
+};
+
 static struct sh_eth_plat_data ether_platform_data __initdata = {
 	.phy		= 0x01,
 	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
@@ -118,7 +231,9 @@
 static struct i2c_board_info i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("rx8581", 0x51),
-	},
+	}, {
+		I2C_BOARD_INFO("ak4643", 0x12),
+	}
 };
 
 /* HSPI*/
@@ -162,10 +277,6 @@
 			  MMC_CAP_NEEDS_POLL,
 };
 
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
-	.flags	= RCAR_VIN_BT656,
-};
-
 /* In the default configuration both decoders reside on I2C bus 0 */
 #define BOCKW_CAMERA(idx)						\
 static struct i2c_board_info camera##idx##_info = {			\
@@ -181,7 +292,237 @@
 BOCKW_CAMERA(0);
 BOCKW_CAMERA(1);
 
+/* VIN */
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+#define R8A7778_VIN(idx)						\
+static struct resource vin##idx##_resources[] __initdata = {		\
+	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
+	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
+};									\
+									\
+static struct platform_device_info vin##idx##_info __initdata = {	\
+	.parent		= &platform_bus,				\
+	.name		= "r8a7778-vin",				\
+	.id		= idx,						\
+	.res		= vin##idx##_resources,				\
+	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
+	.dma_mask	= DMA_BIT_MASK(32),				\
+	.data		= &vin_platform_data,				\
+	.size_data	= sizeof(vin_platform_data),			\
+}
+R8A7778_VIN(0);
+R8A7778_VIN(1);
+
+/* Sound */
+static struct resource rsnd_resources[] __initdata = {
+	[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
+	[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
+	[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
+};
+
+static struct rsnd_ssi_platform_info rsnd_ssi[] = {
+	RSND_SSI_UNUSED, /* SSI 0 */
+	RSND_SSI_UNUSED, /* SSI 1 */
+	RSND_SSI_UNUSED, /* SSI 2 */
+	RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY),
+	RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
+	RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(0, 0, gic_iid(0x86), 0),
+	RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
+};
+
+static struct rsnd_scu_platform_info rsnd_scu[9] = {
+	/* no member at this point */
+};
+
+enum {
+	AK4554_34 = 0,
+	AK4643_56,
+	AK4554_78,
+	SOUND_MAX,
+};
+
+static int rsnd_codec_power(int id, int enable)
+{
+	static int sound_user[SOUND_MAX] = {0, 0, 0};
+	int *usr = NULL;
+	u32 bit;
+
+	switch (id) {
+	case 3:
+	case 4:
+		usr = sound_user + AK4554_34;
+		bit = (1 << 10);
+		break;
+	case 5:
+	case 6:
+		usr = sound_user + AK4643_56;
+		bit = (1 << 6);
+		break;
+	case 7:
+	case 8:
+		usr = sound_user + AK4554_78;
+		bit = (1 << 7);
+		break;
+	}
+
+	if (!usr)
+		return -EIO;
+
+	if (enable) {
+		if (*usr == 0) {
+			u32 val = ioread16(fpga + COMCTLR);
+			val &= ~bit;
+			iowrite16(val, fpga + COMCTLR);
+		}
+
+		(*usr)++;
+	} else {
+		if (*usr == 0)
+			return 0;
+
+		(*usr)--;
+
+		if (*usr == 0) {
+			u32 val = ioread16(fpga + COMCTLR);
+			val |= bit;
+			iowrite16(val, fpga + COMCTLR);
+		}
+	}
+
+	return 0;
+}
+
+static int rsnd_start(int id)
+{
+	return rsnd_codec_power(id, 1);
+}
+
+static int rsnd_stop(int id)
+{
+	return rsnd_codec_power(id, 0);
+}
+
+static struct rcar_snd_info rsnd_info = {
+	.flags		= RSND_GEN1,
+	.ssi_info	= rsnd_ssi,
+	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
+	.scu_info	= rsnd_scu,
+	.scu_info_nr	= ARRAY_SIZE(rsnd_scu),
+	.start		= rsnd_start,
+	.stop		= rsnd_stop,
+};
+
+static struct asoc_simple_card_info rsnd_card_info[] = {
+	/* SSI5, SSI6 */
+	{
+		.name		= "AK4643",
+		.card		= "SSI56-AK4643",
+		.codec		= "ak4642-codec.0-0012",
+		.platform	= "rcar_sound",
+		.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+		.cpu_dai = {
+			.name	= "rsnd-dai.0",
+			.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+		},
+		.codec_dai = {
+			.name	= "ak4642-hifi",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+			.sysclk	= 11289600,
+		},
+	},
+	/* SSI3 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI3-AK4554(playback)",
+		.codec		= "ak4554-adc-dac.0",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.1",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_RIGHT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI4 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI4-AK4554(capture)",
+		.codec		= "ak4554-adc-dac.0",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.2",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_LEFT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI7 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI7-AK4554(playback)",
+		.codec		= "ak4554-adc-dac.1",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.3",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_RIGHT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI8 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI8-AK4554(capture)",
+		.codec		= "ak4554-adc-dac.1",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.4",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_LEFT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	}
+};
+
 static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* AUDIO */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "audio_clk_a", "audio_clk"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "audio_clk_b", "audio_clk"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi34_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi3_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi4_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi5_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi5_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi6_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi6_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi78_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi7_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi8_data", "ssi"),
 	/* Ether */
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
 				  "ether_rmii", "ether"),
@@ -201,7 +542,7 @@
 	/* USB */
 	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
 				  "usb0", "usb0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
+	PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
 				  "usb1", "usb1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
@@ -224,22 +565,28 @@
 				  "vin1_data8", "vin1"),
 };
 
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
 #define PFC	0xfffc0000
 #define PUPR4	0x110
 static void __init bockw_init(void)
 {
 	void __iomem *base;
+	struct clk *clk;
+	int i;
 
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
-	r8a7778_add_ether_device(&ether_platform_data);
-	r8a7778_add_vin_device(0, &vin_platform_data);
+
+	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_platform_data,
+					  sizeof(ether_platform_data));
+
+	platform_device_register_full(&vin0_info);
 	/* VIN1 has a pin conflict with Ether */
 	if (!IS_ENABLED(CONFIG_SH_ETH))
-		r8a7778_add_vin_device(1, &vin_platform_data);
+		platform_device_register_full(&vin1_info);
 	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
 				      &iclink0_ml86v7667,
 				      sizeof(iclink0_ml86v7667));
@@ -269,8 +616,8 @@
 
 
 	/* for SMSC */
-	base = ioremap_nocache(FPGA, SZ_1M);
-	if (base) {
+	fpga = ioremap_nocache(FPGA, SZ_1M);
+	if (fpga) {
 		/*
 		 * CAUTION
 		 *
@@ -278,10 +625,9 @@
 		 * it should be cared in the future
 		 * Now, it is assuming IRQ0 was used only from SMSC.
 		 */
-		u16 val = ioread16(base + IRQ0MR);
+		u16 val = ioread16(fpga + IRQ0MR);
 		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, base + IRQ0MR);
-		iounmap(base);
+		iowrite16(val, fpga + IRQ0MR);
 
 		regulator_register_fixed(0, dummy_supplies,
 					 ARRAY_SIZE(dummy_supplies));
@@ -308,6 +654,42 @@
 			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
 			&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
 	}
+
+	/* for Audio */
+	clk = clk_get(NULL, "audio_clk_b");
+	clk_set_rate(clk, 24576000);
+	clk_put(clk);
+	rsnd_codec_power(5, 1); /* enable ak4642 */
+
+	platform_device_register_simple(
+		"ak4554-adc-dac", 0, NULL, 0);
+
+	platform_device_register_simple(
+		"ak4554-adc-dac", 1, NULL, 0);
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_sound", -1,
+		rsnd_resources, ARRAY_SIZE(rsnd_resources),
+		&rsnd_info, sizeof(rsnd_info));
+
+	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
+		struct platform_device_info cardinfo = {
+			.parent         = &platform_bus,
+			.name           = "asoc-simple-card",
+			.id             = i,
+			.data           = &rsnd_card_info[i],
+			.size_data      = sizeof(struct asoc_simple_card_info),
+			.dma_mask       = ~0,
+		};
+
+		platform_device_register_full(&cardinfo);
+	}
+}
+
+static void __init bockw_init_late(void)
+{
+	r8a7778_init_late();
+	ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
 }
 
 static const char *bockw_boards_compat_dt[] __initdata = {
@@ -320,5 +702,5 @@
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_machine	= bockw_init,
 	.dt_compat	= bockw_boards_compat_dt,
-	.init_late      = r8a7778_init_late,
+	.init_late      = bockw_init_late,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
new file mode 100644
index 0000000..3e92e3c
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -0,0 +1,43 @@
+/*
+ * Genmai board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init genmai_add_standard_devices(void)
+{
+	r7s72100_clock_init();
+	r7s72100_add_dt_devices();
+}
+
+static const char * const genmai_boards_compat_dt[] __initconst = {
+	"renesas,genmai",
+	NULL,
+};
+
+DT_MACHINE_START(GENMAI_DT, "genmai")
+	.init_early	= r7s72100_init_early,
+	.init_machine	= genmai_add_standard_devices,
+	.dt_compat	= genmai_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
new file mode 100644
index 0000000..ace1711
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -0,0 +1,47 @@
+/*
+ * Koelsch board support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init koelsch_add_standard_devices(void)
+{
+	r8a7791_clock_init();
+	r8a7791_add_standard_devices();
+}
+
+static const char * const koelsch_boards_compat_dt[] __initconst = {
+	"renesas,koelsch",
+	NULL,
+};
+
+DT_MACHINE_START(KOELSCH_DT, "koelsch")
+	.smp		= smp_ops(r8a7791_smp_ops),
+	.init_early	= r8a7791_init_early,
+	.init_machine	= koelsch_add_standard_devices,
+	.init_time	= rcar_gen2_timer_init,
+	.dt_compat	= koelsch_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c
index 8f8bb2f..054d8d5 100644
--- a/arch/arm/mach-shmobile/board-kzm9d-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c
@@ -33,6 +33,7 @@
 }
 
 static const char *kzm9d_boards_compat_dt[] __initdata = {
+	"renesas,kzm9d",
 	"renesas,kzm9d-reference",
 	NULL,
 };
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index f199496..fe689b7 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -366,6 +366,7 @@
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.ccs_unsupported = true,
 	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
 	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 9c316a1..1a1a4a8 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -38,8 +38,9 @@
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_early	= r8a7790_init_delay,
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= lager_add_standard_devices,
-	.init_time	= r8a7790_timer_init,
 	.dt_compat	= lager_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 5930af8..a8d3ce6 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -28,6 +28,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/regulator/fixed.h>
@@ -39,6 +40,62 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data lager_du_pdata __initconst = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x70000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+	DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7790",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &lager_du_pdata,
+		.size_data = sizeof(lager_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led lager_leds[] = {
 	{
@@ -56,7 +113,7 @@
 	},
 };
 
-static __initdata struct gpio_led_platform_data lager_leds_pdata = {
+static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
 	.leds		= lager_leds,
 	.num_leds	= ARRAY_SIZE(lager_leds),
 };
@@ -72,7 +129,7 @@
 	GPIO_KEY(KEY_1,		RCAR_GP_PIN(1, 14),	"SW2-pin1"),
 };
 
-static __initdata struct gpio_keys_platform_data lager_keys_pdata = {
+static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
 	.buttons	= gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
 };
@@ -84,29 +141,38 @@
 };
 
 /* MMCIF */
-static struct sh_mmcif_plat_data mmcif1_pdata __initdata = {
+static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.clk_ctrl2_present = true,
+	.ccs_unsupported = true,
 };
 
-static struct resource mmcif1_resources[] __initdata = {
+static const struct resource mmcif1_resources[] __initconst = {
 	DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"),
 	DEFINE_RES_IRQ(gic_spi(170)),
 };
 
 /* Ether */
-static struct sh_eth_plat_data ether_pdata __initdata = {
+static const struct sh_eth_plat_data ether_pdata __initconst = {
 	.phy			= 0x1,
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
 };
 
-static struct resource ether_resources[] __initdata = {
+static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_MEM(0xee700000, 0x400),
 	DEFINE_RES_IRQ(gic_spi(162)),
 };
 
 static const struct pinctrl_map lager_pinctrl_map[] = {
+	/* DU (CN10: ARGB0, CN13: LVDS) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_rgb666", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_sync_1", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_clk_out_0", "du"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
@@ -154,6 +220,8 @@
 					  ether_resources,
 					  ARRAY_SIZE(ether_resources),
 					  &ether_pdata, sizeof(ether_pdata));
+
+	lager_add_du_device();
 }
 
 /*
@@ -180,14 +248,15 @@
 	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
 }
 
-static const char *lager_boards_compat_dt[] __initdata = {
+static const char * const lager_boards_compat_dt[] __initconst = {
 	"renesas,lager",
 	NULL,
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_early	= r8a7790_init_delay,
-	.init_time	= r8a7790_timer_init,
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= lager_init,
 	.dt_compat	= lager_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 3f4250a..2773936 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -28,6 +28,7 @@
 static void __init marzen_init(void)
 {
 	r8a7779_add_standard_devices_dt();
+	r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
 }
 
 static const char *marzen_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 3f5044f..da1352f 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -124,6 +125,8 @@
 };
 
 static struct sh_mobile_sdhi_info sdhi0_platform_data = {
+	.dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX,
 	.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps = MMC_CAP_SD_HIGHSPEED,
 };
@@ -169,6 +172,63 @@
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
+/*
+ * DU
+ *
+ * The panel only specifies the [hv]display and [hv]total values. The position
+ * and width of the sync pulses don't matter, they're copied from VESA timings.
+ */
+static struct rcar_du_encoder_data du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_LVDS,
+		.output = RCAR_DU_OUTPUT_DPAD1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data du_pdata __initconst = {
+	.encoders = du_encoders,
+	.num_encoders = ARRAY_SIZE(du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfff80000, 0x40000),
+	DEFINE_RES_IRQ(gic_iid(0x3f)),
+};
+
+static void __init marzen_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7779",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &du_pdata,
+		.size_data = sizeof(du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
 	{
@@ -237,6 +297,19 @@
 };
 
 static const struct pinctrl_map marzen_pinctrl_map[] = {
+	/* DU (CN10: ARGB0, CN13: LVDS) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_rgb888", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_sync_1", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_clk_out_0", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_rgb666", "du1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_sync_1", "du1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_clk_out", "du1"),
 	/* HSPI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
 				  "hspi0", "hspi0"),
@@ -297,6 +370,7 @@
 	r8a7779_add_vin_device(1, &vin_platform_data);
 	r8a7779_add_vin_device(3, &vin_platform_data);
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
+	marzen_add_du_device();
 }
 
 static const char *marzen_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
new file mode 100644
index 0000000..4aba20c
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -0,0 +1,202 @@
+/*
+ * r7a72100 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2012  Phil Edworthy
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+
+/* registers */
+#define FRQCR		0xfcfe0010
+#define FRQCR2		0xfcfe0014
+#define STBCR3		0xfcfe0420
+#define STBCR4		0xfcfe0424
+
+#define PLL_RATE 30
+
+static struct clk_mapping cpg_mapping = {
+	.phys	= 0xfcfe0000,
+	.len	= 0x1000,
+};
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13330000,
+	.mapping	= &cpg_mapping,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long bus_recalc(struct clk *clk)
+{
+	return clk->parent->rate * 2 / 3;
+}
+
+static struct sh_clk_ops bus_clk_ops = {
+	.recalc		= bus_recalc,
+};
+
+static struct clk bus_clk = {
+	.ops		= &bus_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 12;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 6;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&bus_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
+static int multipliers[] = { 1, 2, 1, 1 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I,
+	DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP33,	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP clocks */
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+};
+
+void __init r7s72100_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup rza1 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 5bd2e85..571409b 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -504,7 +504,7 @@
 
 /* MSTP */
 enum {
-	MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
+	MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
 	MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
 	MSTP411, MSTP410, MSTP409,
@@ -519,6 +519,7 @@
 	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 17, 0), /* SCIFB3 */
+	[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR2, 18, 0), /* DMAC */
 	[MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 0, 0), /* IIC2 */
 	[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
 	[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
@@ -578,6 +579,8 @@
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
+	CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index c4bf2d8..fb6af83 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -69,6 +69,15 @@
 	.mapping = &cpg_mapping,
 };
 
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
 /*
  * clock ratio of these clock will be updated
  * on r8a7778_clock_init()
@@ -100,18 +109,23 @@
 	&p_clk,
 	&g_clk,
 	&z_clk,
+	&audio_clk_a,
+	&audio_clk_b,
+	&audio_clk_c,
 };
 
 enum {
 	MSTP331,
 	MSTP323, MSTP322, MSTP321,
+	MSTP311, MSTP310,
+	MSTP309, MSTP308, MSTP307,
 	MSTP114,
 	MSTP110, MSTP109,
 	MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015,
-	MSTP007,
+	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
+	MSTP009, MSTP008, MSTP007,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
@@ -119,6 +133,11 @@
 	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
 	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
+	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
+	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
+	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
+	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
+	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
 	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
 	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
 	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
@@ -135,11 +154,20 @@
 	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
 	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
+	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
+	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
+	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
+	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
+	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
 	[MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  7, 0), /* HSPI */
 };
 
 static struct clk_lookup lookups[] = {
 	/* main */
+	CLKDEV_CON_ID("audio_clk_a",	&audio_clk_a),
+	CLKDEV_CON_ID("audio_clk_b",	&audio_clk_b),
+	CLKDEV_CON_ID("audio_clk_c",	&audio_clk_c),
+	CLKDEV_CON_ID("audio_clk_internal",	&s1_clk),
 	CLKDEV_CON_ID("shyway_clk",	&s_clk),
 	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
 
@@ -153,6 +181,7 @@
 	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
 	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
+	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
@@ -168,6 +197,17 @@
 	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
 	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
+
+	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
+	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
+	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
+	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
+	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
+	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
+	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
+	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
+	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
 };
 
 void __init r8a7778_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index bd6ad92..1f7080f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -200,7 +200,7 @@
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
-	CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */
+	CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
 };
 
 void __init r8a7779_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index fc36d3d..a64f965 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -52,6 +52,7 @@
 #define SMSTPCR5 0xe6150144
 #define SMSTPCR7 0xe615014c
 #define SMSTPCR8 0xe6150990
+#define SMSTPCR9 0xe6150994
 
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
@@ -181,8 +182,9 @@
 
 /* MSTP */
 enum {
+	MSTP931, MSTP930, MSTP929, MSTP928,
 	MSTP813,
-	MSTP721, MSTP720,
+	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
 	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
@@ -192,7 +194,16 @@
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
+	[MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
+	[MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
+	[MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
 	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
+	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
+	[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
+	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
+	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
+	[MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
 	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
@@ -251,6 +262,11 @@
 	CLKDEV_CON_ID("ssprs",		&div6_clks[DIV6_SSPRS]),
 
 	/* MSTP */
+	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -261,6 +277,10 @@
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+	CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
 	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
@@ -290,7 +310,7 @@
 
 void __init r8a7790_clock_init(void)
 {
-	u32 mode = r8a7790_read_mode_pins();
+	u32 mode = rcar_gen2_read_mode_pins();
 	int k, ret = 0;
 
 	switch (mode & (MD(14) | MD(13))) {
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
new file mode 100644
index 0000000..c9a26f1
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -0,0 +1,237 @@
+/*
+ * r8a7791 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL3
+ * 14 13 19	(MHz)		*1	*1
+ *---------------------------------------------------
+ * 0  0  0	15 x 1		x172/2	x208/2	x106
+ * 0  0  1	15 x 1		x172/2	x208/2	x88
+ * 0  1  0	20 x 1		x130/2	x156/2	x80
+ * 0  1  1	20 x 1		x130/2	x156/2	x66
+ * 1  0  0	26 / 2		x200/2	x240/2	x122
+ * 1  0  1	26 / 2		x200/2	x240/2	x102
+ * 1  1  0	30 / 2		x172/2	x208/2	x106
+ * 1  1  1	30 / 2		x172/2	x208/2	x88
+ *
+ * *1 :	Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ *	see "p1 / 2" on R8A7791_CLOCK_ROOT() below
+ */
+
+#define MD(nr)	(1 << nr)
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+#define SMSTPCR0	0xE6150130
+#define SMSTPCR1	0xE6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xE615013C
+#define SMSTPCR5	0xE6150144
+#define SMSTPCR7	0xe615014c
+#define SMSTPCR8	0xE6150990
+#define SMSTPCR9	0xE6150994
+#define SMSTPCR10	0xE6150998
+#define SMSTPCR11	0xE615099C
+
+#define MODEMR		0xE6160060
+#define SDCKCR		0xE6150074
+#define SD2CKCR		0xE6150078
+#define SD3CKCR		0xE615007C
+#define MMC0CKCR	0xE6150240
+#define MMC1CKCR	0xE6150244
+#define SSPCKCR		0xE6150248
+#define SSPRSCKCR	0xE615024C
+
+static struct clk_mapping cpg_mapping = {
+	.phys   = CPG_BASE,
+	.len    = CPG_LEN,
+};
+
+static struct clk extal_clk = {
+	/* .rate will be updated on r8a7791_clock_init() */
+	.mapping	= &cpg_mapping,
+};
+
+static struct sh_clk_ops followparent_clk_ops = {
+	.recalc	= followparent_recalc,
+};
+
+static struct clk main_clk = {
+	/* .parent will be set r8a73a4_clock_init */
+	.ops	= &followparent_clk_ops,
+};
+
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7791_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(pll1_clk,		main_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(pll3_clk,		main_clk,	1, 1);
+
+/* fixed ratio clock */
+SH_FIXED_RATIO_CLK_SET(extal_div2_clk,		extal_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(cp_clk,			extal_clk,	1, 2);
+
+SH_FIXED_RATIO_CLK_SET(pll1_div2_clk,		pll1_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
+SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
+SH_FIXED_RATIO_CLK_SET(rclk_clk,		pll1_clk,	1, (48 * 1024));
+SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
+
+static struct clk *main_clks[] = {
+	&extal_clk,
+	&extal_div2_clk,
+	&main_clk,
+	&pll1_clk,
+	&pll1_div2_clk,
+	&pll3_clk,
+	&hp_clk,
+	&p_clk,
+	&rclk_clk,
+	&mp_clk,
+	&cp_clk,
+};
+
+/* MSTP */
+enum {
+	MSTP721, MSTP720,
+	MSTP719, MSTP718, MSTP715, MSTP714,
+	MSTP216, MSTP207, MSTP206,
+	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+	MSTP124,
+	MSTP_NR
+};
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
+	[MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
+	[MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
+	[MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
+	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
+	[MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
+	[MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+};
+
+static struct clk_lookup lookups[] = {
+
+	/* main clocks */
+	CLKDEV_CON_ID("extal",		&extal_clk),
+	CLKDEV_CON_ID("extal_div2",	&extal_div2_clk),
+	CLKDEV_CON_ID("main",		&main_clk),
+	CLKDEV_CON_ID("pll1",		&pll1_clk),
+	CLKDEV_CON_ID("pll1_div2",	&pll1_div2_clk),
+	CLKDEV_CON_ID("pll3",		&pll3_clk),
+	CLKDEV_CON_ID("hp",		&hp_clk),
+	CLKDEV_CON_ID("p",		&p_clk),
+	CLKDEV_CON_ID("rclk",		&rclk_clk),
+	CLKDEV_CON_ID("mp",		&mp_clk),
+	CLKDEV_CON_ID("cp",		&cp_clk),
+	CLKDEV_CON_ID("peripheral_clk", &hp_clk),
+
+	/* MSTP */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */
+	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */
+	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
+	CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
+	CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
+	CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+};
+
+#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
+	extal_clk.rate	= e * 1000 * 1000;			\
+	main_clk.parent	= m;					\
+	SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1);		\
+	if (mode & MD(19))					\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1);	\
+	else							\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
+
+
+void __init r8a7791_clock_init(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+	u32 mode;
+	int k, ret = 0;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
+		break;
+	case MD(13):
+		R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
+		break;
+	case MD(14):
+		R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+		break;
+	case MD(13) | MD(14):
+		R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+		break;
+	}
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		goto epanic;
+
+	return;
+
+epanic:
+	panic("failed to setup r8a7791 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index f93751c..e5be5c8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -40,6 +40,9 @@
 	.globl	shmobile_boot_arg
 shmobile_boot_arg:
 2:	.space	4
+	.globl	shmobile_boot_size
+shmobile_boot_size:
+	.long	. - shmobile_boot_vector
 
 /*
  * Per-CPU SMP boot function/argument selection code based on MPIDR
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 7b93868..e319805 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -9,16 +9,23 @@
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_arg;
+extern unsigned long shmobile_boot_size;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);
 extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
 			      unsigned long arg);
+extern int shmobile_smp_cpu_disable(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
 extern void shmobile_boot_scu(void);
 extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
-extern int shmobile_smp_scu_boot_secondary(unsigned int cpu,
-					   struct task_struct *idle);
 extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
+extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus);
+extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
+					    struct task_struct *idle);
+extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
@@ -39,7 +46,6 @@
 #endif
 
 extern void __iomem *shmobile_scu_base;
-extern void shmobile_smp_init_cpus(unsigned int ncores);
 
 static inline void __init shmobile_init_late(void)
 {
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
new file mode 100644
index 0000000..5f34b20
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_R7S72100_H__
+#define __ASM_R7S72100_H__
+
+void r7s72100_add_dt_devices(void);
+void r7s72100_clock_init(void);
+void r7s72100_init_early(void);
+
+#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f3a9b70..ce8bdd1 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -1,10 +1,19 @@
 #ifndef __ASM_R8A73A4_H__
 #define __ASM_R8A73A4_H__
 
+/* DMA slave IDs */
+enum {
+	SHDMA_SLAVE_INVALID,
+	SHDMA_SLAVE_MMCIF0_TX,
+	SHDMA_SLAVE_MMCIF0_RX,
+	SHDMA_SLAVE_MMCIF1_TX,
+	SHDMA_SLAVE_MMCIF1_RX,
+};
+
 void r8a73a4_add_standard_devices(void);
 void r8a73a4_add_dt_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
-void r8a73a4_init_delay(void);
+void r8a73a4_init_early(void);
 
 #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index adfcf51..441886c 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -21,11 +22,15 @@
 #include <linux/sh_eth.h>
 #include <linux/platform_data/camera-rcar.h>
 
+/* HPB-DMA slave IDs */
+enum {
+	HPBDMA_SLAVE_DUMMY,
+	HPBDMA_SLAVE_SDHI0_TX,
+	HPBDMA_SLAVE_SDHI0_RX,
+};
+
 extern void r8a7778_add_standard_devices(void);
 extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7778_add_vin_device(int id,
-				   struct rcar_vin_platform_data *pdata);
 extern void r8a7778_add_dt_devices(void);
 
 extern void r8a7778_init_late(void);
@@ -33,6 +38,9 @@
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
+extern void r8a7778_init_irq_extpin_dt(int irlm);
 extern void r8a7778_pinmux_init(void);
 
+extern int r8a7778_usb_phy_power(bool enable);
+
 #endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 11c7400..17af34e 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -6,6 +6,13 @@
 #include <linux/sh_eth.h>
 #include <linux/platform_data/camera-rcar.h>
 
+/* HPB-DMA slave IDs */
+enum {
+	HPBDMA_SLAVE_DUMMY,
+	HPBDMA_SLAVE_SDHI0_TX,
+	HPBDMA_SLAVE_SDHI0_RX,
+};
+
 struct platform_device;
 
 struct r8a7779_pm_ch {
@@ -26,6 +33,7 @@
 
 extern void r8a7779_init_delay(void);
 extern void r8a7779_init_irq_extpin(int irlm);
+extern void r8a7779_init_irq_extpin_dt(int irlm);
 extern void r8a7779_init_irq_dt(void);
 extern void r8a7779_map_io(void);
 extern void r8a7779_earlytimer_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 788d559..5fbfa28 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -1,14 +1,13 @@
 #ifndef __ASM_R8A7790_H__
 #define __ASM_R8A7790_H__
 
+#include <mach/rcar-gen2.h>
+
 void r8a7790_add_standard_devices(void);
 void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
-void r8a7790_init_delay(void);
-void r8a7790_timer_init(void);
-
-#define MD(nr) BIT(nr)
-u32 r8a7790_read_mode_pins(void);
+void r8a7790_init_early(void);
+extern struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
new file mode 100644
index 0000000..051ead3
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_R8A7791_H__
+#define __ASM_R8A7791_H__
+
+void r8a7791_add_standard_devices(void);
+void r8a7791_add_dt_devices(void);
+void r8a7791_clock_init(void);
+void r8a7791_init_early(void);
+extern struct smp_operations r8a7791_smp_ops;
+
+#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
new file mode 100644
index 0000000..43f606e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_RCAR_GEN2_H__
+#define __ASM_RCAR_GEN2_H__
+
+void rcar_gen2_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 rcar_gen2_read_mode_pins(void);
+
+#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
new file mode 100644
index 0000000..1da5a72
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -0,0 +1,195 @@
+/*
+ * SMP support for SoCs with APMU
+ *
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+static struct {
+	void __iomem *iomem;
+	int bit;
+} apmu_cpus[CONFIG_NR_CPUS];
+
+#define WUPCR_OFFS 0x10
+#define PSTR_OFFS 0x40
+#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
+
+static int apmu_power_on(void __iomem *p, int bit)
+{
+	/* request power on */
+	writel_relaxed(BIT(bit), p + WUPCR_OFFS);
+
+	/* wait for APMU to finish */
+	while (readl_relaxed(p + WUPCR_OFFS) != 0)
+		;
+
+	return 0;
+}
+
+static int apmu_power_off(void __iomem *p, int bit)
+{
+	/* request Core Standby for next WFI */
+	writel_relaxed(3, p + CPUNCR_OFFS(bit));
+	return 0;
+}
+
+static int apmu_power_off_poll(void __iomem *p, int bit)
+{
+	int k;
+
+	for (k = 0; k < 1000; k++) {
+		if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3)
+			return 1;
+
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu))
+{
+	void __iomem *p = apmu_cpus[cpu].iomem;
+
+	return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL;
+}
+
+static void apmu_init_cpu(struct resource *res, int cpu, int bit)
+{
+	if (apmu_cpus[cpu].iomem)
+		return;
+
+	apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res));
+	apmu_cpus[cpu].bit = bit;
+
+	pr_debug("apmu ioremap %d %d 0x%08x 0x%08x\n", cpu, bit,
+		 res->start, resource_size(res));
+}
+
+static struct {
+	struct resource iomem;
+	int cpus[4];
+} apmu_config[] = {
+	{
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.cpus = { 0, 1, 2, 3 },
+	},
+	{
+		.iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+		.cpus = { 0x100, 0x101, 0x102, 0x103 },
+	}
+};
+
+static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit))
+{
+	u32 id;
+	int k;
+	int bit, index;
+	bool is_allowed;
+
+	for (k = 0; k < ARRAY_SIZE(apmu_config); k++) {
+		/* only enable the cluster that includes the boot CPU */
+		is_allowed = false;
+		for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+			id = apmu_config[k].cpus[bit];
+			if (id >= 0) {
+				if (id == cpu_logical_map(0))
+					is_allowed = true;
+			}
+		}
+		if (!is_allowed)
+			continue;
+
+		for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+			id = apmu_config[k].cpus[bit];
+			if (id >= 0) {
+				index = get_logical_index(id);
+				if (index >= 0)
+					fn(&apmu_config[k].iomem, index, bit);
+			}
+		}
+	}
+}
+
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus)
+{
+	/* install boot code shared by all CPUs */
+	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+	shmobile_boot_arg = MPIDR_HWID_BITMASK;
+
+	/* perform per-cpu setup */
+	apmu_parse_cfg(apmu_init_cpu);
+}
+
+int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/* For this particular CPU register boot vector */
+	shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0);
+
+	return apmu_wrap(cpu, apmu_power_on);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* nicked from arch/arm/mach-exynos/hotplug.c */
+static inline void cpu_enter_lowpower_a15(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"       mrc     p15, 0, %0, c1, c0, 0\n"
+	"       bic     %0, %0, %1\n"
+	"       mcr     p15, 0, %0, c1, c0, 0\n"
+		: "=&r" (v)
+		: "Ir" (CR_C)
+		: "cc");
+
+	flush_cache_louis();
+
+	asm volatile(
+	/*
+	 * Turn off coherency
+	 */
+	"       mrc     p15, 0, %0, c1, c0, 1\n"
+	"       bic     %0, %0, %1\n"
+	"       mcr     p15, 0, %0, c1, c0, 1\n"
+		: "=&r" (v)
+		: "Ir" (0x40)
+		: "cc");
+
+	isb();
+	dsb();
+}
+
+void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+{
+	/* For this particular CPU deregister boot vector */
+	shmobile_smp_hook(cpu, 0, 0);
+
+	/* Select next sleep mode using the APMU */
+	apmu_wrap(cpu, apmu_power_off);
+
+	/* Do ARM specific CPU shutdown */
+	cpu_enter_lowpower_a15();
+
+	/* jump to shared mach-shmobile sleep / reset code */
+	shmobile_smp_sleep();
+}
+
+int shmobile_smp_apmu_cpu_kill(unsigned int cpu)
+{
+	return apmu_wrap(cpu, apmu_power_off_poll);
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index c96f501..673ad6e 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -16,6 +17,26 @@
 #include <asm/smp_scu.h>
 #include <mach/common.h>
 
+static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
+					  unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+		/* For this particular CPU register SCU SMP boot vector */
+		shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
+				  (unsigned long)shmobile_scu_base);
+		break;
+	};
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block shmobile_smp_scu_notifier = {
+	.notifier_call = shmobile_smp_scu_notifier_call,
+};
+
 void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
 {
 	/* install boot code shared by all CPUs */
@@ -25,14 +46,9 @@
 	/* enable SCU and cache coherency on booting CPU */
 	scu_enable(shmobile_scu_base);
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
-}
 
-int shmobile_smp_scu_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	/* For this particular CPU register SCU boot vector */
-	shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
-			  (unsigned long)shmobile_scu_base);
-	return 0;
+	/* Use CPU notifier for reset vector control */
+	register_cpu_notifier(&shmobile_smp_scu_notifier);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index d4ae616..9ebc246 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -11,25 +11,10 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/smp.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <mach/common.h>
 
-void __init shmobile_smp_init_cpus(unsigned int ncores)
-{
-	unsigned int i;
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
 extern unsigned long shmobile_smp_fn[];
 extern unsigned long shmobile_smp_arg[];
 extern unsigned long shmobile_smp_mpidr[];
@@ -44,3 +29,10 @@
 	shmobile_smp_arg[cpu] = arg;
 	flush_cache_all();
 }
+
+#ifdef CONFIG_HOTPLUG_CPU
+int shmobile_smp_cpu_disable(unsigned int cpu)
+{
+	return 0; /* Hotplug of any CPU is supported */
+}
+#endif
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
new file mode 100644
index 0000000..d4eb509
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -0,0 +1,88 @@
+/*
+ * r7s72100 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/serial_sci.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r7s72100.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_DATA(index, baseaddr, irq)					\
+[index] = {								\
+	.type		= PORT_SCIF,					\
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,					\
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
+			  SCSCR_REIE,					\
+	.mapbase	= baseaddr,					\
+	.irqs		= { irq + 1, irq + 2, irq + 3, irq },		\
+}
+
+enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 };
+
+static const struct plat_sci_port scif[] __initconst = {
+	SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */
+	SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */
+	SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */
+	SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */
+	SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */
+	SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */
+	SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */
+};
+
+static inline void r7s72100_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
+void __init r7s72100_add_dt_devices(void)
+{
+	r7s72100_register_scif(SCIF0);
+	r7s72100_register_scif(SCIF1);
+	r7s72100_register_scif(SCIF2);
+	r7s72100_register_scif(SCIF3);
+	r7s72100_register_scif(SCIF4);
+	r7s72100_register_scif(SCIF5);
+	r7s72100_register_scif(SCIF6);
+	r7s72100_register_scif(SCIF7);
+}
+
+void __init r7s72100_init_early(void)
+{
+	shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r7s72100_boards_compat_dt[] __initdata = {
+	"renesas,r7s72100",
+	NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
+	.init_early	= r7s72100_init_early,
+	.dt_compat	= r7s72100_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 89491700..b0f2749 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -22,8 +22,10 @@
 #include <linux/of_platform.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/sh_timer.h>
 #include <mach/common.h>
+#include <mach/dma-register.h>
 #include <mach/irqs.h>
 #include <mach/r8a73a4.h>
 #include <asm/mach/arch.h>
@@ -199,15 +201,104 @@
 	r8a7790_register_cmt(10);
 }
 
+/* DMA */
+static const struct sh_dmae_slave_config dma_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_MMCIF0_TX,
+		.addr		= 0xee200034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF0_RX,
+		.addr		= 0xee200034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF1_TX,
+		.addr		= 0xee220034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xe1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF1_RX,
+		.addr		= 0xee220034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xe2,
+	},
+};
+
+#define DMAE_CHANNEL(a, b)				\
+	{						\
+		.offset         = (a) - 0x20,		\
+		.dmars          = (a) - 0x20 + 0x40,	\
+		.chclr_bit	= (b),			\
+		.chclr_offset	= 0x80 - 0x20,		\
+	}
+
+static const struct sh_dmae_channel dma_channels[] = {
+	DMAE_CHANNEL(0x8000, 0),
+	DMAE_CHANNEL(0x8080, 1),
+	DMAE_CHANNEL(0x8100, 2),
+	DMAE_CHANNEL(0x8180, 3),
+	DMAE_CHANNEL(0x8200, 4),
+	DMAE_CHANNEL(0x8280, 5),
+	DMAE_CHANNEL(0x8300, 6),
+	DMAE_CHANNEL(0x8380, 7),
+	DMAE_CHANNEL(0x8400, 8),
+	DMAE_CHANNEL(0x8480, 9),
+	DMAE_CHANNEL(0x8500, 10),
+	DMAE_CHANNEL(0x8580, 11),
+	DMAE_CHANNEL(0x8600, 12),
+	DMAE_CHANNEL(0x8680, 13),
+	DMAE_CHANNEL(0x8700, 14),
+	DMAE_CHANNEL(0x8780, 15),
+	DMAE_CHANNEL(0x8800, 16),
+	DMAE_CHANNEL(0x8880, 17),
+	DMAE_CHANNEL(0x8900, 18),
+	DMAE_CHANNEL(0x8980, 19),
+};
+
+static const struct sh_dmae_pdata dma_pdata = {
+	.slave		= dma_slaves,
+	.slave_num	= ARRAY_SIZE(dma_slaves),
+	.channel	= dma_channels,
+	.channel_num	= ARRAY_SIZE(dma_channels),
+	.ts_low_shift	= TS_LOW_SHIFT,
+	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
+	.ts_high_shift	= TS_HI_SHIFT,
+	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
+	.ts_shift	= dma_ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
+	.dmaor_init     = DMAOR_DME,
+	.chclr_present	= 1,
+	.chclr_bitwise	= 1,
+};
+
+static struct resource dma_resources[] = {
+	DEFINE_RES_MEM(0xe6700020, 0x89e0),
+	DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"),
+	{
+		/* IRQ for channels 0-19 */
+		.start  = gic_spi(200),
+		.end    = gic_spi(219),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+#define r8a73a4_register_dmac()							\
+	platform_device_register_resndata(&platform_bus, "sh-dma-engine", 0,	\
+				dma_resources, ARRAY_SIZE(dma_resources),	\
+				&dma_pdata, sizeof(dma_pdata))
+
 void __init r8a73a4_add_standard_devices(void)
 {
 	r8a73a4_add_dt_devices();
 	r8a73a4_register_irqc(0);
 	r8a73a4_register_irqc(1);
 	r8a73a4_register_thermal();
+	r8a73a4_register_dmac();
 }
 
-void __init r8a73a4_init_delay(void)
+void __init r8a73a4_init_early(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
@@ -222,7 +313,7 @@
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.dt_compat	= r8a73a4_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 6a2657e..03fcc59 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -24,6 +24,7 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
@@ -95,29 +96,46 @@
 		&sh_tmu##idx##_platform_data,		\
 		sizeof(sh_tmu##idx##_platform_data))
 
-/* USB */
-static struct usb_phy *phy;
+int r8a7778_usb_phy_power(bool enable)
+{
+	static struct usb_phy *phy = NULL;
+	int ret = 0;
 
+	if (!phy)
+		phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(phy)) {
+		pr_err("kernel doesn't have usb phy driver\n");
+		return PTR_ERR(phy);
+	}
+
+	if (enable)
+		ret = usb_phy_init(phy);
+	else
+		usb_phy_shutdown(phy);
+
+	return ret;
+}
+
+/* USB */
 static int usb_power_on(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
-		return PTR_ERR(phy);
+	int ret = r8a7778_usb_phy_power(true);
+
+	if (ret)
+		return ret;
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
-	usb_phy_init(phy);
-
 	return 0;
 }
 
 static void usb_power_off(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
+	if (r8a7778_usb_phy_power(false))
 		return;
 
-	usb_phy_shutdown(phy);
-
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 }
@@ -174,20 +192,6 @@
 USB_PLATFORM_INFO(ehci);
 USB_PLATFORM_INFO(ohci);
 
-/* Ether */
-static struct resource ether_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  pdata, sizeof(*pdata));
-}
-
 /* PFC/GPIO */
 static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfffc0000, 0x118),
@@ -272,7 +276,7 @@
 	DEFINE_RES_IRQ(gic_iid(0x75)),
 };
 
-void __init r8a7778_register_hspi(int id)
+static void __init r8a7778_register_hspi(int id)
 {
 	BUG_ON(id < 0 || id > 2);
 
@@ -281,40 +285,6 @@
 		hspi_resources + (2 * id), 2);
 }
 
-/* VIN */
-#define R8A7778_VIN(idx)						\
-static struct resource vin##idx##_resources[] __initdata = {		\
-	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
-	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
-};									\
-									\
-static struct platform_device_info vin##idx##_info __initdata = {	\
-	.parent		= &platform_bus,				\
-	.name		= "r8a7778-vin",				\
-	.id		= idx,						\
-	.res		= vin##idx##_resources,				\
-	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
-	.dma_mask	= DMA_BIT_MASK(32),				\
-}
-
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-static struct platform_device_info *vin_info_table[] __initdata = {
-	&vin0_info,
-	&vin1_info,
-};
-
-void __init r8a7778_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
-{
-	BUG_ON(id < 0 || id > 1);
-
-	vin_info_table[id]->data = pdata;
-	vin_info_table[id]->size_data = sizeof(*pdata);
-
-	platform_device_register_full(vin_info_table[id]);
-}
-
 void __init r8a7778_add_dt_devices(void)
 {
 	int i;
@@ -339,6 +309,88 @@
 	r8a7778_register_tmu(1);
 }
 
+/* HPB-DMA */
+
+/* Asynchronous mode register (ASYNCMDR) bits */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+	{
+		.id	= HPBDMA_SLAVE_SDHI0_TX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 21,
+	}, {
+		.id	= HPBDMA_SLAVE_SDHI0_RX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 22,
+	},
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+	.slaves			= hpb_dmae_slaves,
+	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
+	.channels		= hpb_dmae_channels,
+	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
+	.ts_shift		= {
+		[XMIT_SZ_8BIT]	= 0,
+		[XMIT_SZ_16BIT]	= 1,
+		[XMIT_SZ_32BIT]	= 2,
+	},
+	.num_hw_channels	= 39,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+	/* Channel registers */
+	DEFINE_RES_MEM(0xffc08000, 0x1000),
+	/* Common registers */
+	DEFINE_RES_MEM(0xffc09000, 0x170),
+	/* Asynchronous reset registers */
+	DEFINE_RES_MEM(0xffc00300, 4),
+	/* Asynchronous mode registers */
+	DEFINE_RES_MEM(0xffc00400, 4),
+	/* IRQ for DMA channels */
+	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7778_register_hpb_dmae(void)
+{
+	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+					  hpb_dmae_resources,
+					  ARRAY_SIZE(hpb_dmae_resources),
+					  &dma_platform_data,
+					  sizeof(dma_platform_data));
+}
+
 void __init r8a7778_add_standard_devices(void)
 {
 	r8a7778_add_dt_devices();
@@ -349,12 +401,12 @@
 	r8a7778_register_hspi(0);
 	r8a7778_register_hspi(1);
 	r8a7778_register_hspi(2);
+
+	r8a7778_register_hpb_dmae();
 }
 
 void __init r8a7778_init_late(void)
 {
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
 	platform_device_register_full(&ehci_info);
 	platform_device_register_full(&ohci_info);
 }
@@ -376,7 +428,7 @@
 	DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
 };
 
-void __init r8a7778_init_irq_extpin(int irlm)
+void __init r8a7778_init_irq_extpin_dt(int irlm)
 {
 	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
 	unsigned long tmp;
@@ -394,7 +446,11 @@
 	tmp |= (1 << 21); /* LVLMODE = 1 */
 	iowrite32(tmp, icr0);
 	iounmap(icr0);
+}
 
+void __init r8a7778_init_irq_extpin(int irlm)
+{
+	r8a7778_init_irq_extpin_dt(irlm);
 	if (irlm)
 		platform_device_register_resndata(
 			&platform_bus, "renesas_intc_irqpin", -1,
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index ecd0148..13049e9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -25,6 +25,7 @@
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
@@ -97,7 +98,7 @@
 	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
 };
 
-void __init r8a7779_init_irq_extpin(int irlm)
+void __init r8a7779_init_irq_extpin_dt(int irlm)
 {
 	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
 	u32 tmp;
@@ -115,7 +116,11 @@
 	tmp |= (1 << 21); /* LVLMODE = 1 */
 	iowrite32(tmp, icr0);
 	iounmap(icr0);
+}
 
+void __init r8a7779_init_irq_extpin(int irlm)
+{
+	r8a7779_init_irq_extpin_dt(irlm);
 	if (irlm)
 		platform_device_register_resndata(
 			&platform_bus, "renesas_intc_irqpin", -1,
@@ -632,6 +637,158 @@
 	&vin3_info,
 };
 
+/* HPB-DMA */
+
+/* Asynchronous mode register bits */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MASK		BIT(23)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_SINGLE		BIT(23)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MULTI		0	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_MASK		BIT(22)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_BURST	BIT(22)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_NBURST	0	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MASK		BIT(21)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_SINGLE		BIT(21)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MULTI		0	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_MASK		BIT(20)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_BURST	BIT(20)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_NBURST	0	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MASK		BIT(19)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_SINGLE		BIT(19)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_MASK		BIT(18)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_BURST	BIT(18)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MASK		BIT(17)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_SINGLE		BIT(17)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_MASK		BIT(16)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_BURST	BIT(16)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MASK		BIT(15)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_SINGLE		BIT(15)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_MASK		BIT(14)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_BURST	BIT(14)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MASK		BIT(13)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_SINGLE		BIT(13)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_MASK		BIT(12)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_BURST	BIT(12)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MASK		BIT(11)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_SINGLE		BIT(11)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_MASK		BIT(10)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_BURST	BIT(10)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MASK		BIT(9)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_SINGLE		BIT(9)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_MASK		BIT(8)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_BURST	BIT(8)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MASK		BIT(7)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_SINGLE		BIT(7)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_MASK		BIT(6)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_BURST	BIT(6)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK		BIT(5)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE		BIT(5)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_MASK		BIT(4)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_BURST	BIT(4)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK		BIT(3)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE		BIT(3)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_MASK		BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_BURST	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MASK		BIT(1)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_SINGLE		BIT(1)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MULTI		0	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_MASK		BIT(0)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_BURST	BIT(0)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_NBURST	0	/* SDHI1 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+	{
+		.id	= HPBDMA_SLAVE_SDHI0_TX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_SINGLE |
+			  HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK |
+			  HPB_DMAE_ASYNCMDR_ASBTMD21_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 21,
+	}, {
+		.id	= HPBDMA_SLAVE_SDHI0_RX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_SINGLE |
+			  HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK |
+			  HPB_DMAE_ASYNCMDR_ASBTMD22_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 22,
+	},
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+	.slaves			= hpb_dmae_slaves,
+	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
+	.channels		= hpb_dmae_channels,
+	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
+	.ts_shift		= {
+		[XMIT_SZ_8BIT]	= 0,
+		[XMIT_SZ_16BIT]	= 1,
+		[XMIT_SZ_32BIT]	= 2,
+	},
+	.num_hw_channels	= 44,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+	/* Channel registers */
+	DEFINE_RES_MEM(0xffc08000, 0x1000),
+	/* Common registers */
+	DEFINE_RES_MEM(0xffc09000, 0x170),
+	/* Asynchronous reset registers */
+	DEFINE_RES_MEM(0xffc00300, 4),
+	/* Asynchronous mode registers */
+	DEFINE_RES_MEM(0xffc00400, 4),
+	/* IRQ for DMA channels */
+	DEFINE_RES_NAMED(gic_iid(0x8e), 12, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7779_register_hpb_dmae(void)
+{
+	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+					  hpb_dmae_resources,
+					  ARRAY_SIZE(hpb_dmae_resources),
+					  &dma_platform_data,
+					  sizeof(dma_platform_data));
+}
+
 static struct platform_device *r8a7779_devices_dt[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -665,6 +822,7 @@
 			    ARRAY_SIZE(r8a7779_devices_dt));
 	platform_add_devices(r8a7779_standard_devices,
 			    ARRAY_SIZE(r8a7779_standard_devices));
+	r8a7779_register_hpb_dmae();
 }
 
 void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index d0f5c9f..c47bcebb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -18,7 +18,6 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/clocksource.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -31,17 +30,18 @@
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static struct resource pfc_resources[] __initdata = {
+static const struct resource pfc_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
 
 #define R8A7790_GPIO(idx)						\
-static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
+static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
+static const struct gpio_rcar_config					\
+r8a7790_gpio##idx##_platform_data __initconst = {			\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
@@ -112,7 +112,7 @@
 enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
        HSCIF0, HSCIF1 };
 
-static struct plat_sci_port scif[] __initdata = {
+static const struct plat_sci_port scif[] __initconst = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -131,11 +131,11 @@
 				      sizeof(struct plat_sci_port));
 }
 
-static struct renesas_irqc_config irqc0_data __initdata = {
+static const struct renesas_irqc_config irqc0_data __initconst = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };
 
-static struct resource irqc0_resources[] __initdata = {
+static const struct resource irqc0_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -150,7 +150,7 @@
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
-static struct resource thermal_resources[] __initdata = {
+static const struct resource thermal_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61f0000, 0x14),
 	DEFINE_RES_MEM(0xe61f0100, 0x38),
 	DEFINE_RES_IRQ(gic_spi(69)),
@@ -161,13 +161,13 @@
 					thermal_resources,		\
 					ARRAY_SIZE(thermal_resources))
 
-static struct sh_timer_config cmt00_platform_data __initdata = {
+static const struct sh_timer_config cmt00_platform_data __initconst = {
 	.name = "CMT00",
 	.timer_bit = 0,
 	.clockevent_rating = 80,
 };
 
-static struct resource cmt00_resources[] __initdata = {
+static const struct resource cmt00_resources[] __initconst = {
 	DEFINE_RES_MEM(0xffca0510, 0x0c),
 	DEFINE_RES_MEM(0xffca0500, 0x04),
 	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
@@ -202,72 +202,7 @@
 	r8a7790_register_thermal();
 }
 
-#define MODEMR 0xe6160060
-
-u32 __init r8a7790_read_mode_pins(void)
-{
-	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
-	u32 mode;
-
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
-	return mode;
-}
-
-#define CNTCR 0
-#define CNTFID0 0x20
-
-void __init r8a7790_timer_init(void)
-{
-#ifdef CONFIG_ARM_ARCH_TIMER
-	u32 mode = r8a7790_read_mode_pins();
-	void __iomem *base;
-	int extal_mhz = 0;
-	u32 freq;
-
-	/* At Linux boot time the r8a7790 arch timer comes up
-	 * with the counter disabled. Moreover, it may also report
-	 * a potentially incorrect fixed 13 MHz frequency. To be
-	 * correct these registers need to be updated to use the
-	 * frequency EXTAL / 2 which can be determined by the MD pins.
-	 */
-
-	switch (mode & (MD(14) | MD(13))) {
-	case 0:
-		extal_mhz = 15;
-		break;
-	case MD(13):
-		extal_mhz = 20;
-		break;
-	case MD(14):
-		extal_mhz = 26;
-		break;
-	case MD(13) | MD(14):
-		extal_mhz = 30;
-		break;
-	}
-
-	/* The arch timer frequency equals EXTAL / 2 */
-	freq = extal_mhz * (1000000 / 2);
-
-	/* Remap "armgcnt address map" space */
-	base = ioremap(0xe6080000, PAGE_SIZE);
-
-	/* Update registers with correct frequency */
-	iowrite32(freq, base + CNTFID0);
-	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
-
-	/* make sure arch timer is started by setting bit 0 of CNTCR */
-	iowrite32(1, base + CNTCR);
-	iounmap(base);
-#endif /* CONFIG_ARM_ARCH_TIMER */
-
-	clocksource_of_init();
-}
-
-void __init r8a7790_init_delay(void)
+void __init r8a7790_init_early(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
@@ -276,14 +211,15 @@
 
 #ifdef CONFIG_USE_OF
 
-static const char *r8a7790_boards_compat_dt[] __initdata = {
+static const char * const r8a7790_boards_compat_dt[] __initconst = {
 	"renesas,r8a7790",
 	NULL,
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_early	= r8a7790_init_delay,
-	.init_time	= r8a7790_timer_init,
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
new file mode 100644
index 0000000..d9393d6
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -0,0 +1,184 @@
+/*
+ * r8a7791 processor support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.irqs		= SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_4,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define SCIFB_DATA(index, baseaddr, irq)	\
+[index] = {					\
+	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
+	.scbrr_algo_id	= SCBRR_ALGO_4,		\
+	.scscr = SCSCR_RE | SCSCR_TE,		\
+}
+
+#define SCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+	SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 };
+
+static const struct plat_sci_port scif[] __initconst = {
+	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */
+	SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */
+	SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */
+	SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */
+	SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */
+	SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */
+	SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */
+};
+
+static inline void r8a7791_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
+static const struct sh_timer_config cmt00_platform_data __initconst = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static const struct resource cmt00_resources[] __initconst = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7791_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
+static struct renesas_irqc_config irqc0_data = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */
+};
+
+static struct resource irqc0_resources[] = {
+	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+	DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */
+	DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */
+	DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */
+	DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */
+	DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */
+	DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */
+};
+
+#define r8a7791_register_irqc(idx)					\
+	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+					  idx, irqc##idx##_resources,	\
+					  ARRAY_SIZE(irqc##idx##_resources), \
+					  &irqc##idx##_data,		\
+					  sizeof(struct renesas_irqc_config))
+
+void __init r8a7791_add_dt_devices(void)
+{
+	r8a7791_register_scif(SCIFA0);
+	r8a7791_register_scif(SCIFA1);
+	r8a7791_register_scif(SCIFB0);
+	r8a7791_register_scif(SCIFB1);
+	r8a7791_register_scif(SCIFB2);
+	r8a7791_register_scif(SCIFA2);
+	r8a7791_register_scif(SCIF0);
+	r8a7791_register_scif(SCIF1);
+	r8a7791_register_scif(SCIF2);
+	r8a7791_register_scif(SCIF3);
+	r8a7791_register_scif(SCIF4);
+	r8a7791_register_scif(SCIF5);
+	r8a7791_register_scif(SCIFA3);
+	r8a7791_register_scif(SCIFA4);
+	r8a7791_register_scif(SCIFA5);
+	r8a7791_register_cmt(00);
+}
+
+void __init r8a7791_add_standard_devices(void)
+{
+	r8a7791_add_dt_devices();
+	r8a7791_register_irqc(0);
+}
+
+void __init r8a7791_init_early(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r8a7791_boards_compat_dt[] __initdata = {
+	"renesas,r8a7791",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a7791_smp_ops),
+	.init_early	= r8a7791_init_early,
+	.init_time	= rcar_gen2_timer_init,
+	.dt_compat	= r8a7791_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
new file mode 100644
index 0000000..5734c24
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -0,0 +1,91 @@
+/*
+ * R-Car Generation 2 support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/common.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define MODEMR 0xe6160060
+
+u32 __init rcar_gen2_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
+void __init rcar_gen2_timer_init(void)
+{
+#ifdef CONFIG_ARM_ARCH_TIMER
+	u32 mode = rcar_gen2_read_mode_pins();
+	void __iomem *base;
+	int extal_mhz = 0;
+	u32 freq;
+
+	/* At Linux boot time the r8a7790 arch timer comes up
+	 * with the counter disabled. Moreover, it may also report
+	 * a potentially incorrect fixed 13 MHz frequency. To be
+	 * correct these registers need to be updated to use the
+	 * frequency EXTAL / 2 which can be determined by the MD pins.
+	 */
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		extal_mhz = 15;
+		break;
+	case MD(13):
+		extal_mhz = 20;
+		break;
+	case MD(14):
+		extal_mhz = 26;
+		break;
+	case MD(13) | MD(14):
+		extal_mhz = 30;
+		break;
+	}
+
+	/* The arch timer frequency equals EXTAL / 2 */
+	freq = extal_mhz * (1000000 / 2);
+
+	/* Remap "armgcnt address map" space */
+	base = ioremap(0xe6080000, PAGE_SIZE);
+
+	/* Update registers with correct frequency */
+	iowrite32(freq, base + CNTFID0);
+	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	/* make sure arch timer is started by setting bit 0 of CNTCR */
+	iowrite32(1, base + CNTCR);
+	iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
+
+	clocksource_of_init();
+}
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 522de5e..f2ca923 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -34,12 +34,6 @@
 
 static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int ret;
-
-	ret = shmobile_smp_scu_boot_secondary(cpu, idle);
-	if (ret)
-		return ret;
-
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu)));
 	return 0;
 }
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 0f05e9f..627c1f0 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -87,10 +87,6 @@
 	unsigned int lcpu = cpu_logical_map(cpu);
 	int ret;
 
-	ret = shmobile_smp_scu_boot_secondary(cpu, idle);
-	if (ret)
-		return ret;
-
 	if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu))
 		ch = r8a7779_ch_cpu[lcpu];
 
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
new file mode 100644
index 0000000..015e275
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -0,0 +1,67 @@
+/*
+ * SMP support for r8a7790
+ *
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA7BAR		0x0030
+#define CA15RESCNT	0x0040
+#define CA7RESCNT	0x0044
+#define MERAM		0xe8080000
+
+static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* MERAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(MERAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (MERAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar, p + CA7BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA7BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+		       p + CA7RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7790_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
new file mode 100644
index 0000000..2df5bd1
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -0,0 +1,62 @@
+/*
+ * SMP support for r8a7791
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA15RESCNT	0x0040
+#define RAM		0xe6300000
+
+static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* RAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(RAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (RAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7791_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 0baa244..13ba36a 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -46,11 +46,6 @@
 static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned int lcpu = cpu_logical_map(cpu);
-	int ret;
-
-	ret = shmobile_smp_scu_boot_secondary(cpu, idle);
-	if (ret)
-		return ret;
 
 	if (((__raw_readl(PSTR) >> (4 * lcpu)) & 3) == 3)
 		__raw_writel(1 << lcpu, WUPCR);	/* wake up */
@@ -71,18 +66,11 @@
 	shmobile_smp_scu_prepare_cpus(max_cpus);
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-static int sh73a0_cpu_disable(unsigned int cpu)
-{
-	return 0; /* CPU0 and CPU1 supported */
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
 struct smp_operations sh73a0_smp_ops __initdata = {
 	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable		= sh73a0_cpu_disable,
+	.cpu_disable		= shmobile_smp_cpu_disable,
 	.cpu_die		= shmobile_smp_scu_cpu_die,
 	.cpu_kill		= shmobile_smp_scu_cpu_kill,
 #endif
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index dd86db4..037100a 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -4,7 +4,6 @@
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select DW_APB_TIMER_OF
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index bfce964..dd0d49c 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -14,7 +14,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -107,7 +106,6 @@
 {
 	l2x0_of_init(0, ~0UL);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	of_clk_init(NULL);
 	socfpga_init_clocks();
 }
 
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index df0d59a..ac1710e6 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -7,11 +7,9 @@
 	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 
 if PLAT_SPEAR
 
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 8fe6f0c..1217fb5 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -7,9 +7,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
 #include <linux/irq.h>
+#include <linux/of_platform.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
@@ -28,11 +27,10 @@
 	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
 }
 
-static void __init stih41x_timer_init(void)
+static void __init stih41x_machine_init(void)
 {
-	of_clk_init(NULL);
-	clocksource_of_init();
 	stih41x_l2x0_init();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *stih41x_dt_match[] __initdata = {
@@ -42,7 +40,7 @@
 };
 
 DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
-	.init_time	= stih41x_timer_init,
+	.init_machine	= stih41x_machine_init,
 	.smp		= smp_ops(sti_smp_ops),
 	.dt_compat	= stih41x_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3ab2f65..c9e72c8 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,14 +1,14 @@
 config ARCH_SUNXI
 	bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select HAVE_SMP
 	select PINCTRL
+	select PINCTRL_SUNXI
 	select SPARSE_IRQ
 	select SUN4I_TIMER
-	select PINCTRL_SUNXI
-	select ARM_GIC
-	select HAVE_SMP
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index e79fb34..61d3a38 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,7 +10,6 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,8 +19,6 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <linux/clk/sunxi.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
@@ -93,14 +90,13 @@
 }
 
 static struct of_device_id sunxi_restart_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart },
-	{ .compatible = "allwinner,sun6i-wdt", .data = sun6i_restart },
+	{ .compatible = "allwinner,sun4i-wdt" },
+	{ .compatible = "allwinner,sun6i-wdt" },
 	{ /*sentinel*/ }
 };
 
 static void sunxi_setup_restart(void)
 {
-	const struct of_device_id *of_id;
 	struct device_node *np;
 
 	np = of_find_matching_node(NULL, sunxi_restart_ids);
@@ -109,17 +105,6 @@
 
 	wdt_base = of_iomap(np, 0);
 	WARN(!wdt_base, "failed to map watchdog base address");
-
-	of_id = of_match_node(sunxi_restart_ids, np);
-	WARN(!of_id, "restart function not available");
-
-	arm_pm_restart = of_id->data;
-}
-
-static void __init sunxi_timer_init(void)
-{
-	sunxi_init_clocks();
-	clocksource_of_init();
 }
 
 static void __init sunxi_dt_init(void)
@@ -133,13 +118,33 @@
 	"allwinner,sun4i-a10",
 	"allwinner,sun5i-a10s",
 	"allwinner,sun5i-a13",
-	"allwinner,sun6i-a31",
-	"allwinner,sun7i-a20",
 	NULL,
 };
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
 	.init_machine	= sunxi_dt_init,
-	.init_time	= sunxi_timer_init,
 	.dt_compat	= sunxi_board_dt_compat,
+	.restart	= sun4i_restart,
+MACHINE_END
+
+static const char * const sun6i_board_dt_compat[] = {
+	"allwinner,sun6i-a31",
+	NULL,
+};
+
+DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
+	.init_machine	= sunxi_dt_init,
+	.dt_compat	= sun6i_board_dt_compat,
+	.restart	= sun6i_restart,
+MACHINE_END
+
+static const char * const sun7i_board_dt_compat[] = {
+	"allwinner,sun7i-a20",
+	NULL,
+};
+
+DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
+	.init_machine	= sunxi_dt_init,
+	.dt_compat	= sun7i_board_dt_compat,
+	.restart	= sun4i_restart,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 67a76f2..0bf04a0 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -3,7 +3,6 @@
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
@@ -11,7 +10,6 @@
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
@@ -53,14 +51,22 @@
 
 config ARCH_TEGRA_114_SOC
 	bool "Enable support for Tegra114 family"
-	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181
 	select ARM_L1_CACHE_SHIFT_6
+	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL_TEGRA114
 	help
 	  Support for NVIDIA Tegra T114 processor family, based on the
 	  ARM CortexA15MP CPU
 
+config ARCH_TEGRA_124_SOC
+	bool "Enable support for Tegra124 family"
+	select ARM_L1_CACHE_SHIFT_6
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for NVIDIA Tegra T124 processor family, based on the
+	  ARM CortexA15MP CPU
+
 config TEGRA_AHB
 	bool "Enable AHB driver for NVIDIA Tegra SoCs"
 	default y
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index e7e5f45..019bb17 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,6 +1,5 @@
 asflags-y				+= -march=armv7-a
 
-obj-y                                   += common.o
 obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y					+= fuse.o
@@ -36,5 +35,10 @@
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= cpuidle-tegra114.o
 endif
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= pm-tegra30.o
+ifeq ($(CONFIG_CPU_IDLE),y)
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= cpuidle-tegra114.o
+endif
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-paz00.o
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 740e16f..06f0240 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -20,12 +20,11 @@
 #include <linux/platform_device.h>
 #include <linux/rfkill-gpio.h>
 #include "board.h"
-#include "board-paz00.h"
 
 static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
 	.name		= "wifi_rfkill",
-	.reset_gpio	= TEGRA_WIFI_RST,
-	.shutdown_gpio	= TEGRA_WIFI_PWRN,
+	.reset_gpio	= 25, /* PD1 */
+	.shutdown_gpio	= 85, /* PK5 */
 	.type	= RFKILL_TYPE_WLAN,
 };
 
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
deleted file mode 100644
index 25c08ec..0000000
--- a/arch/arm/mach-tegra/board-paz00.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00.h
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_PAZ00_H
-#define _MACH_TEGRA_BOARD_PAZ00_H
-
-#include "gpio-names.h"
-
-#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
-#define TEGRA_WIFI_RST			TEGRA_GPIO_PD1
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index db6810d..bcf5dbf 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -25,20 +25,8 @@
 #include <linux/types.h>
 #include <linux/reboot.h>
 
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd);
-
-void __init tegra_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
-void __init tegra_dt_init_irq(void);
-
-void tegra_init_late(void);
-
-#ifdef CONFIG_DEBUG_FS
-int tegra_clk_debugfs_init(void);
-#else
-static inline int tegra_clk_debugfs_init(void) { return 0; }
-#endif
 
 int __init tegra_powergate_init(void);
 #if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
deleted file mode 100644
index 94a119a..0000000
--- a/arch/arm/mach-tegra/common.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/arm/mach-tegra/common.c
- *
- * Copyright (c) 2013 NVIDIA Corporation. All rights reserved.
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/irqchip.h>
-#include <linux/clk-provider.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include "board.h"
-#include "common.h"
-#include "cpuidle.h"
-#include "fuse.h"
-#include "iomap.h"
-#include "irq.h"
-#include "pmc.h"
-#include "apbio.h"
-#include "sleep.h"
-#include "pm.h"
-#include "reset.h"
-
-/*
- * Storage for debug-macro.S's state.
- *
- * This must be in .data not .bss so that it gets initialized each time the
- * kernel is loaded. The data is declared here rather than debug-macro.S so
- * that multiple inclusions of debug-macro.S point at the same data.
- */
-u32 tegra_uart_config[4] = {
-	/* Debug UART initialization required */
-	1,
-	/* Debug UART physical address */
-	0,
-	/* Debug UART virtual address */
-	0,
-	/* Scratch space for debug macro */
-	0,
-};
-
-#ifdef CONFIG_OF
-void __init tegra_dt_init_irq(void)
-{
-	of_clk_init(NULL);
-	tegra_pmc_init();
-	tegra_init_irq();
-	irqchip_init();
-	tegra_legacy_irq_syscore_init();
-}
-#endif
-
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0);
-	u32 reg;
-
-	reg = readl_relaxed(reset);
-	reg |= 0x10;
-	writel_relaxed(reg, reset);
-}
-
-static void __init tegra_init_cache(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	int ret;
-	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
-	u32 aux_ctrl, cache_type;
-
-	cache_type = readl(p + L2X0_CACHE_TYPE);
-	aux_ctrl = (cache_type & 0x700) << (17-8);
-	aux_ctrl |= 0x7C400001;
-
-	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
-	if (!ret)
-		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
-#endif
-
-}
-
-void __init tegra_init_early(void)
-{
-	tegra_cpu_reset_handler_init();
-	tegra_apb_io_init();
-	tegra_init_fuse();
-	tegra_init_cache();
-	tegra_powergate_init();
-	tegra_hotplug_init();
-}
-
-void __init tegra_init_late(void)
-{
-	tegra_init_suspend();
-	tegra_cpuidle_init();
-	tegra_powergate_debugfs_init();
-}
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index 0961dfc..7bc5d8d 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -39,7 +39,9 @@
 			tegra30_cpuidle_init();
 		break;
 	case TEGRA114:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra114_cpuidle_init();
 		break;
 	}
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index 5348543..ce8ab8a 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -87,6 +87,7 @@
 		break;
 	case TEGRA30:
 	case TEGRA114:
+	case TEGRA124:
 		/* clear wfe bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
@@ -125,6 +126,7 @@
 		break;
 	case TEGRA30:
 	case TEGRA114:
+	case TEGRA124:
 		/* clear wfe bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index e035cd2..d4639c5 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -21,14 +21,26 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/export.h>
+#include <linux/random.h>
 #include <linux/tegra-soc.h>
 
 #include "fuse.h"
 #include "iomap.h"
 #include "apbio.h"
 
+/* Tegra20 only */
 #define FUSE_UID_LOW		0x108
 #define FUSE_UID_HIGH		0x10c
+
+/* Tegra30 and later */
+#define FUSE_VENDOR_CODE	0x200
+#define FUSE_FAB_CODE		0x204
+#define FUSE_LOT_CODE_0		0x208
+#define FUSE_LOT_CODE_1		0x20c
+#define FUSE_WAFER_ID		0x210
+#define FUSE_X_COORDINATE	0x214
+#define FUSE_Y_COORDINATE	0x218
+
 #define FUSE_SKU_INFO		0x110
 
 #define TEGRA20_FUSE_SPARE_BIT		0x200
@@ -112,21 +124,51 @@
 	return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
 }
 
-void tegra_init_fuse(void)
+static void __init tegra20_fuse_init_randomness(void)
+{
+	u32 randomness[2];
+
+	randomness[0] = tegra_fuse_readl(FUSE_UID_LOW);
+	randomness[1] = tegra_fuse_readl(FUSE_UID_HIGH);
+
+	add_device_randomness(randomness, sizeof(randomness));
+}
+
+/* Applies to Tegra30 or later */
+static void __init tegra30_fuse_init_randomness(void)
+{
+	u32 randomness[7];
+
+	randomness[0] = tegra_fuse_readl(FUSE_VENDOR_CODE);
+	randomness[1] = tegra_fuse_readl(FUSE_FAB_CODE);
+	randomness[2] = tegra_fuse_readl(FUSE_LOT_CODE_0);
+	randomness[3] = tegra_fuse_readl(FUSE_LOT_CODE_1);
+	randomness[4] = tegra_fuse_readl(FUSE_WAFER_ID);
+	randomness[5] = tegra_fuse_readl(FUSE_X_COORDINATE);
+	randomness[6] = tegra_fuse_readl(FUSE_Y_COORDINATE);
+
+	add_device_randomness(randomness, sizeof(randomness));
+}
+
+void __init tegra_init_fuse(void)
 {
 	u32 id;
+	u32 randomness[5];
 
 	u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 	reg |= 1 << 28;
 	writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 
 	reg = tegra_fuse_readl(FUSE_SKU_INFO);
+	randomness[0] = reg;
 	tegra_sku_id = reg & 0xFF;
 
 	reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
+	randomness[1] = reg;
 	tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
 
 	id = tegra_read_chipid();
+	randomness[2] = id;
 	tegra_chip_id = (id >> 8) & 0xff;
 
 	switch (tegra_chip_id) {
@@ -149,6 +191,18 @@
 
 	tegra_revision = tegra_get_revision(id);
 	tegra_init_speedo_data();
+	randomness[3] = (tegra_cpu_process_id << 16) | tegra_core_process_id;
+	randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id;
+
+	add_device_randomness(randomness, sizeof(randomness));
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		tegra20_fuse_init_randomness();
+	case TEGRA30:
+	case TEGRA114:
+	default:
+		tegra30_fuse_init_randomness();
+	}
 
 	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
 		tegra_revision_name[tegra_revision],
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
index def7968..c01d047 100644
--- a/arch/arm/mach-tegra/fuse.h
+++ b/arch/arm/mach-tegra/fuse.h
@@ -29,6 +29,7 @@
 #define TEGRA20		0x20
 #define TEGRA30		0x30
 #define TEGRA114	0x35
+#define TEGRA124	0x40
 
 #ifndef __ASSEMBLY__
 enum tegra_revision {
diff --git a/arch/arm/mach-tegra/gpio-names.h b/arch/arm/mach-tegra/gpio-names.h
deleted file mode 100644
index f28220a..0000000
--- a/arch/arm/mach-tegra/gpio-names.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio-names.h
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_TEGRA_GPIO_NAMES_H
-#define __MACH_TEGRA_GPIO_NAMES_H
-
-#define TEGRA_GPIO_PA0		0
-#define TEGRA_GPIO_PA1		1
-#define TEGRA_GPIO_PA2		2
-#define TEGRA_GPIO_PA3		3
-#define TEGRA_GPIO_PA4		4
-#define TEGRA_GPIO_PA5		5
-#define TEGRA_GPIO_PA6		6
-#define TEGRA_GPIO_PA7		7
-#define TEGRA_GPIO_PB0		8
-#define TEGRA_GPIO_PB1		9
-#define TEGRA_GPIO_PB2		10
-#define TEGRA_GPIO_PB3		11
-#define TEGRA_GPIO_PB4		12
-#define TEGRA_GPIO_PB5		13
-#define TEGRA_GPIO_PB6		14
-#define TEGRA_GPIO_PB7		15
-#define TEGRA_GPIO_PC0		16
-#define TEGRA_GPIO_PC1		17
-#define TEGRA_GPIO_PC2		18
-#define TEGRA_GPIO_PC3		19
-#define TEGRA_GPIO_PC4		20
-#define TEGRA_GPIO_PC5		21
-#define TEGRA_GPIO_PC6		22
-#define TEGRA_GPIO_PC7		23
-#define TEGRA_GPIO_PD0		24
-#define TEGRA_GPIO_PD1		25
-#define TEGRA_GPIO_PD2		26
-#define TEGRA_GPIO_PD3		27
-#define TEGRA_GPIO_PD4		28
-#define TEGRA_GPIO_PD5		29
-#define TEGRA_GPIO_PD6		30
-#define TEGRA_GPIO_PD7		31
-#define TEGRA_GPIO_PE0		32
-#define TEGRA_GPIO_PE1		33
-#define TEGRA_GPIO_PE2		34
-#define TEGRA_GPIO_PE3		35
-#define TEGRA_GPIO_PE4		36
-#define TEGRA_GPIO_PE5		37
-#define TEGRA_GPIO_PE6		38
-#define TEGRA_GPIO_PE7		39
-#define TEGRA_GPIO_PF0		40
-#define TEGRA_GPIO_PF1		41
-#define TEGRA_GPIO_PF2		42
-#define TEGRA_GPIO_PF3		43
-#define TEGRA_GPIO_PF4		44
-#define TEGRA_GPIO_PF5		45
-#define TEGRA_GPIO_PF6		46
-#define TEGRA_GPIO_PF7		47
-#define TEGRA_GPIO_PG0		48
-#define TEGRA_GPIO_PG1		49
-#define TEGRA_GPIO_PG2		50
-#define TEGRA_GPIO_PG3		51
-#define TEGRA_GPIO_PG4		52
-#define TEGRA_GPIO_PG5		53
-#define TEGRA_GPIO_PG6		54
-#define TEGRA_GPIO_PG7		55
-#define TEGRA_GPIO_PH0		56
-#define TEGRA_GPIO_PH1		57
-#define TEGRA_GPIO_PH2		58
-#define TEGRA_GPIO_PH3		59
-#define TEGRA_GPIO_PH4		60
-#define TEGRA_GPIO_PH5		61
-#define TEGRA_GPIO_PH6		62
-#define TEGRA_GPIO_PH7		63
-#define TEGRA_GPIO_PI0		64
-#define TEGRA_GPIO_PI1		65
-#define TEGRA_GPIO_PI2		66
-#define TEGRA_GPIO_PI3		67
-#define TEGRA_GPIO_PI4		68
-#define TEGRA_GPIO_PI5		69
-#define TEGRA_GPIO_PI6		70
-#define TEGRA_GPIO_PI7		71
-#define TEGRA_GPIO_PJ0		72
-#define TEGRA_GPIO_PJ1		73
-#define TEGRA_GPIO_PJ2		74
-#define TEGRA_GPIO_PJ3		75
-#define TEGRA_GPIO_PJ4		76
-#define TEGRA_GPIO_PJ5		77
-#define TEGRA_GPIO_PJ6		78
-#define TEGRA_GPIO_PJ7		79
-#define TEGRA_GPIO_PK0		80
-#define TEGRA_GPIO_PK1		81
-#define TEGRA_GPIO_PK2		82
-#define TEGRA_GPIO_PK3		83
-#define TEGRA_GPIO_PK4		84
-#define TEGRA_GPIO_PK5		85
-#define TEGRA_GPIO_PK6		86
-#define TEGRA_GPIO_PK7		87
-#define TEGRA_GPIO_PL0		88
-#define TEGRA_GPIO_PL1		89
-#define TEGRA_GPIO_PL2		90
-#define TEGRA_GPIO_PL3		91
-#define TEGRA_GPIO_PL4		92
-#define TEGRA_GPIO_PL5		93
-#define TEGRA_GPIO_PL6		94
-#define TEGRA_GPIO_PL7		95
-#define TEGRA_GPIO_PM0		96
-#define TEGRA_GPIO_PM1		97
-#define TEGRA_GPIO_PM2		98
-#define TEGRA_GPIO_PM3		99
-#define TEGRA_GPIO_PM4		100
-#define TEGRA_GPIO_PM5		101
-#define TEGRA_GPIO_PM6		102
-#define TEGRA_GPIO_PM7		103
-#define TEGRA_GPIO_PN0		104
-#define TEGRA_GPIO_PN1		105
-#define TEGRA_GPIO_PN2		106
-#define TEGRA_GPIO_PN3		107
-#define TEGRA_GPIO_PN4		108
-#define TEGRA_GPIO_PN5		109
-#define TEGRA_GPIO_PN6		110
-#define TEGRA_GPIO_PN7		111
-#define TEGRA_GPIO_PO0		112
-#define TEGRA_GPIO_PO1		113
-#define TEGRA_GPIO_PO2		114
-#define TEGRA_GPIO_PO3		115
-#define TEGRA_GPIO_PO4		116
-#define TEGRA_GPIO_PO5		117
-#define TEGRA_GPIO_PO6		118
-#define TEGRA_GPIO_PO7		119
-#define TEGRA_GPIO_PP0		120
-#define TEGRA_GPIO_PP1		121
-#define TEGRA_GPIO_PP2		122
-#define TEGRA_GPIO_PP3		123
-#define TEGRA_GPIO_PP4		124
-#define TEGRA_GPIO_PP5		125
-#define TEGRA_GPIO_PP6		126
-#define TEGRA_GPIO_PP7		127
-#define TEGRA_GPIO_PQ0		128
-#define TEGRA_GPIO_PQ1		129
-#define TEGRA_GPIO_PQ2		130
-#define TEGRA_GPIO_PQ3		131
-#define TEGRA_GPIO_PQ4		132
-#define TEGRA_GPIO_PQ5		133
-#define TEGRA_GPIO_PQ6		134
-#define TEGRA_GPIO_PQ7		135
-#define TEGRA_GPIO_PR0		136
-#define TEGRA_GPIO_PR1		137
-#define TEGRA_GPIO_PR2		138
-#define TEGRA_GPIO_PR3		139
-#define TEGRA_GPIO_PR4		140
-#define TEGRA_GPIO_PR5		141
-#define TEGRA_GPIO_PR6		142
-#define TEGRA_GPIO_PR7		143
-#define TEGRA_GPIO_PS0		144
-#define TEGRA_GPIO_PS1		145
-#define TEGRA_GPIO_PS2		146
-#define TEGRA_GPIO_PS3		147
-#define TEGRA_GPIO_PS4		148
-#define TEGRA_GPIO_PS5		149
-#define TEGRA_GPIO_PS6		150
-#define TEGRA_GPIO_PS7		151
-#define TEGRA_GPIO_PT0		152
-#define TEGRA_GPIO_PT1		153
-#define TEGRA_GPIO_PT2		154
-#define TEGRA_GPIO_PT3		155
-#define TEGRA_GPIO_PT4		156
-#define TEGRA_GPIO_PT5		157
-#define TEGRA_GPIO_PT6		158
-#define TEGRA_GPIO_PT7		159
-#define TEGRA_GPIO_PU0		160
-#define TEGRA_GPIO_PU1		161
-#define TEGRA_GPIO_PU2		162
-#define TEGRA_GPIO_PU3		163
-#define TEGRA_GPIO_PU4		164
-#define TEGRA_GPIO_PU5		165
-#define TEGRA_GPIO_PU6		166
-#define TEGRA_GPIO_PU7		167
-#define TEGRA_GPIO_PV0		168
-#define TEGRA_GPIO_PV1		169
-#define TEGRA_GPIO_PV2		170
-#define TEGRA_GPIO_PV3		171
-#define TEGRA_GPIO_PV4		172
-#define TEGRA_GPIO_PV5		173
-#define TEGRA_GPIO_PV6		174
-#define TEGRA_GPIO_PV7		175
-#define TEGRA_GPIO_PW0		176
-#define TEGRA_GPIO_PW1		177
-#define TEGRA_GPIO_PW2		178
-#define TEGRA_GPIO_PW3		179
-#define TEGRA_GPIO_PW4		180
-#define TEGRA_GPIO_PW5		181
-#define TEGRA_GPIO_PW6		182
-#define TEGRA_GPIO_PW7		183
-#define TEGRA_GPIO_PX0		184
-#define TEGRA_GPIO_PX1		185
-#define TEGRA_GPIO_PX2		186
-#define TEGRA_GPIO_PX3		187
-#define TEGRA_GPIO_PX4		188
-#define TEGRA_GPIO_PX5		189
-#define TEGRA_GPIO_PX6		190
-#define TEGRA_GPIO_PX7		191
-#define TEGRA_GPIO_PY0		192
-#define TEGRA_GPIO_PY1		193
-#define TEGRA_GPIO_PY2		194
-#define TEGRA_GPIO_PY3		195
-#define TEGRA_GPIO_PY4		196
-#define TEGRA_GPIO_PY5		197
-#define TEGRA_GPIO_PY6		198
-#define TEGRA_GPIO_PY7		199
-#define TEGRA_GPIO_PZ0		200
-#define TEGRA_GPIO_PZ1		201
-#define TEGRA_GPIO_PZ2		202
-#define TEGRA_GPIO_PZ3		203
-#define TEGRA_GPIO_PZ4		204
-#define TEGRA_GPIO_PZ5		205
-#define TEGRA_GPIO_PZ6		206
-#define TEGRA_GPIO_PZ7		207
-#define TEGRA_GPIO_PAA0		208
-#define TEGRA_GPIO_PAA1		209
-#define TEGRA_GPIO_PAA2		210
-#define TEGRA_GPIO_PAA3		211
-#define TEGRA_GPIO_PAA4		212
-#define TEGRA_GPIO_PAA5		213
-#define TEGRA_GPIO_PAA6		214
-#define TEGRA_GPIO_PAA7		215
-#define TEGRA_GPIO_PBB0		216
-#define TEGRA_GPIO_PBB1		217
-#define TEGRA_GPIO_PBB2		218
-#define TEGRA_GPIO_PBB3		219
-#define TEGRA_GPIO_PBB4		220
-#define TEGRA_GPIO_PBB5		221
-#define TEGRA_GPIO_PBB6		222
-#define TEGRA_GPIO_PBB7		223
-
-#endif
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index 04de2e8..ff26af2 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -57,4 +57,6 @@
 		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
 		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
 }
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 3f5fa07..26b1c2a 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -24,44 +24,12 @@
 #define TEGRA_IRAM_BASE			0x40000000
 #define TEGRA_IRAM_SIZE			SZ_256K
 
-#define TEGRA_IRAM_CODE_AREA		(TEGRA_IRAM_BASE + SZ_4K)
-
-#define TEGRA_HOST1X_BASE		0x50000000
-#define TEGRA_HOST1X_SIZE		0x24000
-
 #define TEGRA_ARM_PERIF_BASE		0x50040000
 #define TEGRA_ARM_PERIF_SIZE		SZ_8K
 
-#define TEGRA_ARM_PL310_BASE		0x50043000
-#define TEGRA_ARM_PL310_SIZE		SZ_4K
-
 #define TEGRA_ARM_INT_DIST_BASE		0x50041000
 #define TEGRA_ARM_INT_DIST_SIZE		SZ_4K
 
-#define TEGRA_MPE_BASE			0x54040000
-#define TEGRA_MPE_SIZE			SZ_256K
-
-#define TEGRA_VI_BASE			0x54080000
-#define TEGRA_VI_SIZE			SZ_256K
-
-#define TEGRA_ISP_BASE			0x54100000
-#define TEGRA_ISP_SIZE			SZ_256K
-
-#define TEGRA_DISPLAY_BASE		0x54200000
-#define TEGRA_DISPLAY_SIZE		SZ_256K
-
-#define TEGRA_DISPLAY2_BASE		0x54240000
-#define TEGRA_DISPLAY2_SIZE		SZ_256K
-
-#define TEGRA_HDMI_BASE			0x54280000
-#define TEGRA_HDMI_SIZE			SZ_256K
-
-#define TEGRA_GART_BASE			0x58000000
-#define TEGRA_GART_SIZE			SZ_32M
-
-#define TEGRA_RES_SEMA_BASE		0x60001000
-#define TEGRA_RES_SEMA_SIZE		SZ_4K
-
 #define TEGRA_PRIMARY_ICTLR_BASE	0x60004000
 #define TEGRA_PRIMARY_ICTLR_SIZE	SZ_64
 
@@ -98,51 +66,15 @@
 #define TEGRA_FLOW_CTRL_BASE		0x60007000
 #define TEGRA_FLOW_CTRL_SIZE		20
 
-#define TEGRA_AHB_DMA_BASE		0x60008000
-#define TEGRA_AHB_DMA_SIZE		SZ_4K
-
-#define TEGRA_AHB_DMA_CH0_BASE		0x60009000
-#define TEGRA_AHB_DMA_CH0_SIZE		32
-
-#define TEGRA_APB_DMA_BASE		0x6000A000
-#define TEGRA_APB_DMA_SIZE		SZ_4K
-
-#define TEGRA_APB_DMA_CH0_BASE		0x6000B000
-#define TEGRA_APB_DMA_CH0_SIZE		32
-
-#define TEGRA_AHB_GIZMO_BASE		0x6000C004
-#define TEGRA_AHB_GIZMO_SIZE		0x10C
-
 #define TEGRA_SB_BASE			0x6000C200
 #define TEGRA_SB_SIZE			256
 
-#define TEGRA_STATMON_BASE		0x6000C400
-#define TEGRA_STATMON_SIZE		SZ_1K
-
-#define TEGRA_GPIO_BASE			0x6000D000
-#define TEGRA_GPIO_SIZE			SZ_4K
-
 #define TEGRA_EXCEPTION_VECTORS_BASE    0x6000F000
 #define TEGRA_EXCEPTION_VECTORS_SIZE    SZ_4K
 
 #define TEGRA_APB_MISC_BASE		0x70000000
 #define TEGRA_APB_MISC_SIZE		SZ_4K
 
-#define TEGRA_APB_MISC_DAS_BASE		0x70000c00
-#define TEGRA_APB_MISC_DAS_SIZE		SZ_128
-
-#define TEGRA_AC97_BASE			0x70002000
-#define TEGRA_AC97_SIZE			SZ_512
-
-#define TEGRA_SPDIF_BASE		0x70002400
-#define TEGRA_SPDIF_SIZE		SZ_512
-
-#define TEGRA_I2S1_BASE			0x70002800
-#define TEGRA_I2S1_SIZE			SZ_256
-
-#define TEGRA_I2S2_BASE			0x70002A00
-#define TEGRA_I2S2_SIZE			SZ_256
-
 #define TEGRA_UARTA_BASE		0x70006000
 #define TEGRA_UARTA_SIZE		SZ_64
 
@@ -158,108 +90,27 @@
 #define TEGRA_UARTE_BASE		0x70006400
 #define TEGRA_UARTE_SIZE		SZ_256
 
-#define TEGRA_NAND_BASE			0x70008000
-#define TEGRA_NAND_SIZE			SZ_256
-
-#define TEGRA_HSMMC_BASE		0x70008500
-#define TEGRA_HSMMC_SIZE		SZ_256
-
-#define TEGRA_SNOR_BASE			0x70009000
-#define TEGRA_SNOR_SIZE			SZ_4K
-
-#define TEGRA_PWFM_BASE			0x7000A000
-#define TEGRA_PWFM_SIZE			SZ_256
-
-#define TEGRA_PWFM0_BASE		0x7000A000
-#define TEGRA_PWFM0_SIZE		4
-
-#define TEGRA_PWFM1_BASE		0x7000A010
-#define TEGRA_PWFM1_SIZE		4
-
-#define TEGRA_PWFM2_BASE		0x7000A020
-#define TEGRA_PWFM2_SIZE		4
-
-#define TEGRA_PWFM3_BASE		0x7000A030
-#define TEGRA_PWFM3_SIZE		4
-
-#define TEGRA_MIPI_BASE			0x7000B000
-#define TEGRA_MIPI_SIZE			SZ_256
-
-#define TEGRA_I2C_BASE			0x7000C000
-#define TEGRA_I2C_SIZE			SZ_256
-
-#define TEGRA_TWC_BASE			0x7000C100
-#define TEGRA_TWC_SIZE			SZ_256
-
-#define TEGRA_SPI_BASE			0x7000C380
-#define TEGRA_SPI_SIZE			48
-
-#define TEGRA_I2C2_BASE			0x7000C400
-#define TEGRA_I2C2_SIZE			SZ_256
-
-#define TEGRA_I2C3_BASE			0x7000C500
-#define TEGRA_I2C3_SIZE			SZ_256
-
-#define TEGRA_OWR_BASE			0x7000C600
-#define TEGRA_OWR_SIZE			80
-
-#define TEGRA_DVC_BASE			0x7000D000
-#define TEGRA_DVC_SIZE			SZ_512
-
-#define TEGRA_SPI1_BASE			0x7000D400
-#define TEGRA_SPI1_SIZE			SZ_512
-
-#define TEGRA_SPI2_BASE			0x7000D600
-#define TEGRA_SPI2_SIZE			SZ_512
-
-#define TEGRA_SPI3_BASE			0x7000D800
-#define TEGRA_SPI3_SIZE			SZ_512
-
-#define TEGRA_SPI4_BASE			0x7000DA00
-#define TEGRA_SPI4_SIZE			SZ_512
-
-#define TEGRA_RTC_BASE			0x7000E000
-#define TEGRA_RTC_SIZE			SZ_256
-
-#define TEGRA_KBC_BASE			0x7000E200
-#define TEGRA_KBC_SIZE			SZ_256
-
 #define TEGRA_PMC_BASE			0x7000E400
 #define TEGRA_PMC_SIZE			SZ_256
 
-#define TEGRA_MC_BASE			0x7000F000
-#define TEGRA_MC_SIZE			SZ_1K
-
 #define TEGRA_EMC_BASE			0x7000F400
 #define TEGRA_EMC_SIZE			SZ_1K
 
 #define TEGRA_FUSE_BASE			0x7000F800
 #define TEGRA_FUSE_SIZE			SZ_1K
 
-#define TEGRA_KFUSE_BASE		0x7000FC00
-#define TEGRA_KFUSE_SIZE		SZ_1K
-
 #define TEGRA_EMC0_BASE			0x7001A000
 #define TEGRA_EMC0_SIZE			SZ_2K
 
 #define TEGRA_EMC1_BASE			0x7001A800
 #define TEGRA_EMC1_SIZE			SZ_2K
 
+#define TEGRA124_EMC_BASE		0x7001B000
+#define TEGRA124_EMC_SIZE		SZ_2K
+
 #define TEGRA_CSITE_BASE		0x70040000
 #define TEGRA_CSITE_SIZE		SZ_256K
 
-#define TEGRA_SDMMC1_BASE		0xC8000000
-#define TEGRA_SDMMC1_SIZE		SZ_512
-
-#define TEGRA_SDMMC2_BASE		0xC8000200
-#define TEGRA_SDMMC2_SIZE		SZ_512
-
-#define TEGRA_SDMMC3_BASE		0xC8000400
-#define TEGRA_SDMMC3_SIZE		SZ_512
-
-#define TEGRA_SDMMC4_BASE		0xC8000600
-#define TEGRA_SDMMC4_SIZE		SZ_512
-
 /* On TEGRA, many peripherals are very closely packed in
  * two 256MB io windows (that actually only use about 64KB
  * at the start of each).
diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h
index 501952a..e32e174 100644
--- a/arch/arm/mach-tegra/irammap.h
+++ b/arch/arm/mach-tegra/irammap.h
@@ -23,4 +23,10 @@
 #define TEGRA_IRAM_RESET_HANDLER_OFFSET	0
 #define TEGRA_IRAM_RESET_HANDLER_SIZE	SZ_1K
 
+/*
+ * This area is used for LPx resume vector, only while LPx power state is
+ * active. At other times, the AVP may use this area for arbitrary purposes
+ */
+#define TEGRA_IRAM_LPx_RESUME_AREA	(TEGRA_IRAM_BASE + SZ_4K)
+
 #endif
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 2d02036..eb72ae7 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -176,6 +176,8 @@
 		return tegra30_boot_secondary(cpu, idle);
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
 		return tegra114_boot_secondary(cpu, idle);
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+		return tegra114_boot_secondary(cpu, idle);
 
 	return -EINVAL;
 }
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index ed294a0..4ae0286 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -59,8 +59,10 @@
 		break;
 	case TEGRA30:
 	case TEGRA114:
+	case TEGRA124:
 		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
-		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra_tear_down_cpu = tegra30_tear_down_cpu;
 		break;
 	}
@@ -216,8 +218,10 @@
 		break;
 	case TEGRA30:
 	case TEGRA114:
+	case TEGRA124:
 		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
-		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra30_lp1_iram_hook();
 		break;
 	default:
@@ -244,8 +248,10 @@
 		break;
 	case TEGRA30:
 	case TEGRA114:
+	case TEGRA124:
 		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
-		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra30_sleep_core_init();
 		break;
 	default:
@@ -263,10 +269,10 @@
 	tegra_pmc_suspend();
 
 	/* copy the reset vector & SDRAM shutdown code into IRAM */
-	memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_CODE_AREA),
+	memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
 		iram_save_size);
-	memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), tegra_lp1_iram.start_addr,
-		iram_save_size);
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		tegra_lp1_iram.start_addr, iram_save_size);
 
 	*((u32 *)tegra_cpu_lp1_mask) = 1;
 }
@@ -276,7 +282,7 @@
 	tegra_pmc_resume();
 
 	/* restore IRAM */
-	memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), iram_save_addr,
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
 		iram_save_size);
 
 	*(u32 *)tegra_cpu_lp1_mask = 0;
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index fe204e5..6e92a7c 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -37,9 +37,6 @@
 
 extern unsigned long l2x0_saved_regs_addr;
 
-void save_cpu_arch_register(void);
-void restore_cpu_arch_register(void);
-
 void tegra_clear_cpu_in_lp2(void);
 bool tegra_set_cpu_in_lp2(void);
 
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index 8acb881..fb79202 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/tegra-powergate.h>
 
 #include "flowctrl.h"
 #include "fuse.h"
@@ -43,12 +44,6 @@
 #define PMC_CPUPWRGOOD_TIMER	0xc8
 #define PMC_CPUPWROFF_TIMER	0xcc
 
-#define TEGRA_POWERGATE_PCIE	3
-#define TEGRA_POWERGATE_VDEC	4
-#define TEGRA_POWERGATE_CPU1	9
-#define TEGRA_POWERGATE_CPU2	10
-#define TEGRA_POWERGATE_CPU3	11
-
 static u8 tegra_cpu_domains[] = {
 	0xFF,			/* not available for CPU0 */
 	TEGRA_POWERGATE_CPU1,
@@ -166,6 +161,15 @@
 	return tegra_pmc_powergate_remove_clamping(id);
 }
 
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
+{
+	u32 val;
+
+	val = tegra_pmc_readl(0);
+	val |= 0x10;
+	tegra_pmc_writel(val, 0);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate)
 {
@@ -279,13 +283,35 @@
 #endif
 
 static const struct of_device_id matches[] __initconst = {
+	{ .compatible = "nvidia,tegra124-pmc" },
 	{ .compatible = "nvidia,tegra114-pmc" },
 	{ .compatible = "nvidia,tegra30-pmc" },
 	{ .compatible = "nvidia,tegra20-pmc" },
 	{ }
 };
 
-static void __init tegra_pmc_parse_dt(void)
+void __init tegra_pmc_init_irq(void)
+{
+	struct device_node *np;
+	u32 val;
+
+	np = of_find_matching_node(NULL, matches);
+	BUG_ON(!np);
+
+	tegra_pmc_base = of_iomap(np, 0);
+
+	tegra_pmc_invert_interrupt = of_property_read_bool(np,
+				     "nvidia,invert-interrupt");
+
+	val = tegra_pmc_readl(PMC_CTRL);
+	if (tegra_pmc_invert_interrupt)
+		val |= PMC_CTRL_INTR_LOW;
+	else
+		val &= ~PMC_CTRL_INTR_LOW;
+	tegra_pmc_writel(val, PMC_CTRL);
+}
+
+void __init tegra_pmc_init(void)
 {
 	struct device_node *np;
 	u32 prop;
@@ -296,10 +322,6 @@
 	np = of_find_matching_node(NULL, matches);
 	BUG_ON(!np);
 
-	tegra_pmc_base = of_iomap(np, 0);
-
-	tegra_pmc_invert_interrupt = of_property_read_bool(np,
-				     "nvidia,invert-interrupt");
 	tegra_pclk = of_clk_get_by_name(np, "pclk");
 	WARN_ON(IS_ERR(tegra_pclk));
 
@@ -365,17 +387,3 @@
 
 	pmc_pm_data.suspend_mode = suspend_mode;
 }
-
-void __init tegra_pmc_init(void)
-{
-	u32 val;
-
-	tegra_pmc_parse_dt();
-
-	val = tegra_pmc_readl(PMC_CTRL);
-	if (tegra_pmc_invert_interrupt)
-		val |= PMC_CTRL_INTR_LOW;
-	else
-		val &= ~PMC_CTRL_INTR_LOW;
-	tegra_pmc_writel(val, PMC_CTRL);
-}
diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h
index 549f8c7..59e19c34 100644
--- a/arch/arm/mach-tegra/pmc.h
+++ b/arch/arm/mach-tegra/pmc.h
@@ -18,6 +18,8 @@
 #ifndef __MACH_TEGRA_PMC_H
 #define __MACH_TEGRA_PMC_H
 
+#include <linux/reboot.h>
+
 enum tegra_suspend_mode {
 	TEGRA_SUSPEND_NONE = 0,
 	TEGRA_SUSPEND_LP2,	/* CPU voltage off */
@@ -39,6 +41,9 @@
 int tegra_pmc_cpu_power_on(int cpuid);
 int tegra_pmc_cpu_remove_clamping(int cpuid);
 
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd);
+
+void tegra_pmc_init_irq(void);
 void tegra_pmc_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index f076f0f..85d28e7 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -42,8 +42,16 @@
 
 static int tegra_num_powerdomains;
 static int tegra_num_cpu_domains;
-static u8 *tegra_cpu_domains;
-static u8 tegra30_cpu_domains[] = {
+static const u8 *tegra_cpu_domains;
+
+static const u8 tegra30_cpu_domains[] = {
+	TEGRA_POWERGATE_CPU,
+	TEGRA_POWERGATE_CPU1,
+	TEGRA_POWERGATE_CPU2,
+	TEGRA_POWERGATE_CPU3,
+};
+
+static const u8 tegra114_cpu_domains[] = {
 	TEGRA_POWERGATE_CPU0,
 	TEGRA_POWERGATE_CPU1,
 	TEGRA_POWERGATE_CPU2,
@@ -189,6 +197,11 @@
 		tegra_num_cpu_domains = 4;
 		tegra_cpu_domains = tegra30_cpu_domains;
 		break;
+	case TEGRA114:
+		tegra_num_powerdomains = 23;
+		tegra_num_cpu_domains = 4;
+		tegra_cpu_domains = tegra114_cpu_domains;
+		break;
 	default:
 		/* Unknown Tegra variant. Disable powergating */
 		tegra_num_powerdomains = 0;
@@ -229,6 +242,27 @@
 	[TEGRA_POWERGATE_3D1]	= "3d1",
 };
 
+static const char * const powergate_name_t114[] = {
+	[TEGRA_POWERGATE_CPU]	= "cpu0",
+	[TEGRA_POWERGATE_3D]	= "3d",
+	[TEGRA_POWERGATE_VENC]	= "venc",
+	[TEGRA_POWERGATE_VDEC]	= "vdec",
+	[TEGRA_POWERGATE_MPE]	= "mpe",
+	[TEGRA_POWERGATE_HEG]	= "heg",
+	[TEGRA_POWERGATE_CPU1]	= "cpu1",
+	[TEGRA_POWERGATE_CPU2]	= "cpu2",
+	[TEGRA_POWERGATE_CPU3]	= "cpu3",
+	[TEGRA_POWERGATE_CELP]	= "celp",
+	[TEGRA_POWERGATE_CPU0]	= "cpu0",
+	[TEGRA_POWERGATE_C0NC]	= "c0nc",
+	[TEGRA_POWERGATE_C1NC]	= "c1nc",
+	[TEGRA_POWERGATE_DIS]	= "dis",
+	[TEGRA_POWERGATE_DISB]	= "disb",
+	[TEGRA_POWERGATE_XUSBA]	= "xusba",
+	[TEGRA_POWERGATE_XUSBB]	= "xusbb",
+	[TEGRA_POWERGATE_XUSBC]	= "xusbc",
+};
+
 static int powergate_show(struct seq_file *s, void *data)
 {
 	int i;
@@ -236,9 +270,14 @@
 	seq_printf(s, " powergate powered\n");
 	seq_printf(s, "------------------\n");
 
-	for (i = 0; i < tegra_num_powerdomains; i++)
+	for (i = 0; i < tegra_num_powerdomains; i++) {
+		if (!powergate_name[i])
+			continue;
+
 		seq_printf(s, " %9s %7s\n", powergate_name[i],
 			tegra_powergate_is_powered(i) ? "yes" : "no");
+	}
+
 	return 0;
 }
 
@@ -265,6 +304,9 @@
 	case TEGRA30:
 		powergate_name = powergate_name_t30;
 		break;
+	case TEGRA114:
+		powergate_name = powergate_name_t114;
+		break;
 	}
 
 	if (powergate_name) {
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index f527b2c..8c1ba4fe 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -45,17 +45,11 @@
 ENTRY(tegra_resume)
 	check_cpu_part_num 0xc09, r8, r9
 	bleq	v7_invalidate_l1
-	blne	tegra_init_l2_for_a15
 
 	cpu_id	r0
-	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
-	cmp	r6, #TEGRA114
-	beq	no_cpu0_chk
-
 	cmp	r0, #0				@ CPU0?
  THUMB(	it	ne )
 	bne	cpu_resume			@ no
-no_cpu0_chk:
 
 	/* Are we on Tegra20? */
 	cmp	r6, #TEGRA20
@@ -75,7 +69,7 @@
 
 	mov32	r9, 0xc09
 	cmp	r8, r9
-	bne	not_ca9
+	bne	end_ca9_scu_l2_resume
 #ifdef CONFIG_HAVE_ARM_SCU
 	/* enable SCU */
 	mov32	r0, TEGRA_ARM_PERIF_BASE
@@ -86,7 +80,10 @@
 
 	/* L2 cache resume & re-enable */
 	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
-not_ca9:
+end_ca9_scu_l2_resume:
+	mov32	r9, 0xc0f
+	cmp	r8, r9
+	bleq	tegra_init_l2_for_a15
 
 	b	cpu_resume
 ENDPROC(tegra_resume)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index fd0bbf8..568f5bb 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -82,7 +82,7 @@
 
 #ifdef CONFIG_PM_SLEEP
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] =
-		TEGRA_IRAM_CODE_AREA;
+		TEGRA_IRAM_LPx_RESUME_AREA;
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
 		virt_to_phys((void *)tegra_resume);
 #endif
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 5c3bd11..aaaf3ab 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -25,6 +25,7 @@
 #include <asm/cp15.h>
 #include <asm/cache.h>
 
+#include "irammap.h"
 #include "sleep.h"
 #include "flowctrl.h"
 
@@ -235,7 +236,7 @@
 	mov32	r0, tegra20_tear_down_core
 	mov32	r1, tegra20_iram_start
 	sub	r0, r0, r1
-	mov32	r1, TEGRA_IRAM_CODE_AREA
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
 	add	r0, r0, r1
 
 	mov	pc, r3
@@ -328,7 +329,7 @@
  * The physical address of tegra_resume expected to be stored in
  * PMC_SCRATCH41.
  *
- * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
  */
 ENTRY(tegra20_lp1_reset)
 	/*
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 63fa91b..b16d4a57 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -20,6 +20,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
 
+#include "irammap.h"
 #include "fuse.h"
 #include "sleep.h"
 #include "flowctrl.h"
@@ -262,7 +263,7 @@
 	mov32	r0, tegra30_tear_down_core
 	mov32	r1, tegra30_iram_start
 	sub	r0, r0, r1
-	mov32	r1, TEGRA_IRAM_CODE_AREA
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
 	add	r0, r0, r1
 
 	mov	pc, r3
@@ -314,7 +315,7 @@
  * The physical address of tegra_resume expected to be stored in
  * PMC_SCRATCH41.
  *
- * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
  */
 ENTRY(tegra30_lp1_reset)
 	/*
@@ -382,7 +383,7 @@
 	add	r1, r1, #LOCK_DELAY
 	wait_until r1, r7, r3
 
-	adr	r5, tegra30_sdram_pad_save
+	adr	r5, tegra_sdram_pad_save
 
 	ldr	r4, [r5, #0x18]		@ restore CLK_SOURCE_MSELECT
 	str	r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
@@ -407,8 +408,12 @@
 	cmp	r10, #TEGRA30
 	movweq	r0, #:lower16:TEGRA_EMC_BASE	@ r0 reserved for emc base
 	movteq	r0, #:upper16:TEGRA_EMC_BASE
-	movwne	r0, #:lower16:TEGRA_EMC0_BASE
-	movtne	r0, #:upper16:TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA114
+	movweq	r0, #:lower16:TEGRA_EMC0_BASE
+	movteq	r0, #:upper16:TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	movweq	r0, #:lower16:TEGRA124_EMC_BASE
+	movteq	r0, #:upper16:TEGRA124_EMC_BASE
 
 exit_self_refresh:
 	ldr	r1, [r5, #0xC]		@ restore EMC_XM2VTTGENPADCTRL
@@ -537,6 +542,7 @@
 	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra30_sdram_pad_address_end:
 
 tegra114_sdram_pad_address:
 	.word	TEGRA_EMC0_BASE + EMC_CFG				@0x0
@@ -552,16 +558,28 @@
 	.word	TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL			@0x28
 	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL			@0x2c
 	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2			@0x30
+tegra114_sdram_pad_adress_end:
+
+tegra124_sdram_pad_address:
+	.word	TEGRA124_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL		@0x8
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL		@0xc
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2		@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra124_sdram_pad_address_end:
 
 tegra30_sdram_pad_size:
-	.word	tegra114_sdram_pad_address - tegra30_sdram_pad_address
+	.word	tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
 
 tegra114_sdram_pad_size:
-	.word	tegra30_sdram_pad_size - tegra114_sdram_pad_address
+	.word	tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
 
-	.type	tegra30_sdram_pad_save, %object
-tegra30_sdram_pad_save:
-	.rept (tegra30_sdram_pad_size - tegra114_sdram_pad_address) / 4
+	.type	tegra_sdram_pad_save, %object
+tegra_sdram_pad_save:
+	.rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
 	.long	0
 	.endr
 
@@ -692,13 +710,18 @@
  */
 tegra30_sdram_self_refresh:
 
-	adr	r8, tegra30_sdram_pad_save
+	adr	r8, tegra_sdram_pad_save
 	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
 	cmp	r10, #TEGRA30
 	adreq	r2, tegra30_sdram_pad_address
 	ldreq	r3, tegra30_sdram_pad_size
-	adrne	r2, tegra114_sdram_pad_address
-	ldrne	r3, tegra114_sdram_pad_size
+	cmp	r10, #TEGRA114
+	adreq	r2, tegra114_sdram_pad_address
+	ldreq	r3, tegra114_sdram_pad_size
+	cmp	r10, #TEGRA124
+	adreq	r2, tegra124_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+
 	mov	r9, #0
 
 padsave:
@@ -716,7 +739,10 @@
 
 	cmp	r10, #TEGRA30
 	ldreq	r0, =TEGRA_EMC_BASE	@ r0 reserved for emc base addr
-	ldrne	r0, =TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA114
+	ldreq	r0, =TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	ldreq	r0, =TEGRA124_EMC_BASE
 
 enter_self_refresh:
 	cmp	r10, #TEGRA30
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 5b86055..ce553d5 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -16,7 +16,6 @@
  *
  */
 
-#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -34,16 +33,78 @@
 #include <linux/sys_soc.h>
 #include <linux/usb/tegra_usb_phy.h>
 #include <linux/clk/tegra.h>
+#include <linux/irqchip.h>
 
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/setup.h>
 
+#include "apbio.h"
 #include "board.h"
 #include "common.h"
+#include "cpuidle.h"
 #include "fuse.h"
 #include "iomap.h"
+#include "irq.h"
+#include "pmc.h"
+#include "pm.h"
+#include "reset.h"
+#include "sleep.h"
+
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+u32 tegra_uart_config[4] = {
+	/* Debug UART initialization required */
+	1,
+	/* Debug UART physical address */
+	0,
+	/* Debug UART virtual address */
+	0,
+	/* Scratch space for debug macro */
+	0,
+};
+
+static void __init tegra_init_cache(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	int ret;
+	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
+	u32 aux_ctrl, cache_type;
+
+	cache_type = readl(p + L2X0_CACHE_TYPE);
+	aux_ctrl = (cache_type & 0x700) << (17-8);
+	aux_ctrl |= 0x7C400001;
+
+	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
+	if (!ret)
+		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
+#endif
+}
+
+static void __init tegra_init_early(void)
+{
+	tegra_cpu_reset_handler_init();
+	tegra_apb_io_init();
+	tegra_init_fuse();
+	tegra_init_cache();
+	tegra_powergate_init();
+	tegra_hotplug_init();
+}
+
+static void __init tegra_dt_init_irq(void)
+{
+	tegra_pmc_init_irq();
+	tegra_init_irq();
+	irqchip_init();
+	tegra_legacy_irq_syscore_init();
+}
 
 static void __init tegra_dt_init(void)
 {
@@ -51,6 +112,8 @@
 	struct soc_device *soc_dev;
 	struct device *parent = NULL;
 
+	tegra_pmc_init();
+
 	tegra_clocks_apply_init_table();
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
@@ -97,7 +160,9 @@
 {
 	int i;
 
-	tegra_init_late();
+	tegra_init_suspend();
+	tegra_cpuidle_init();
+	tegra_powergate_debugfs_init();
 
 	for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
 		if (of_machine_is_compatible(board_init_funcs[i].machine)) {
@@ -108,6 +173,7 @@
 }
 
 static const char * const tegra_dt_board_compat[] = {
+	"nvidia,tegra124",
 	"nvidia,tegra114",
 	"nvidia,tegra30",
 	"nvidia,tegra20",
@@ -119,9 +185,8 @@
 	.smp		= smp_ops(tegra_smp_ops),
 	.init_early	= tegra_init_early,
 	.init_irq	= tegra_dt_init_irq,
-	.init_time	= clocksource_of_init,
 	.init_machine	= tegra_dt_init,
 	.init_late	= tegra_dt_init_late,
-	.restart	= tegra_assert_system_reset,
+	.restart	= tegra_pmc_restart,
 	.dt_compat	= tegra_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index a165986..8e23071 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -5,7 +5,6 @@
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 99a28d6..c67f8ad 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,36 +1,31 @@
 config ARCH_U8500
 	bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
 	depends on MMU
+	select AB8500_CORE
+	select ABX500_CORE
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Support for ST-Ericsson's Ux500 architecture
-
-if ARCH_U8500
-
-config UX500_SOC_COMMON
-	bool
-	default y
-	select ABX500_CORE
-	select AB8500_CORE
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
 	select COMMON_CLK
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
-	select PINCTRL_NOMADIK
 	select PINCTRL_ABX500
+	select PINCTRL_NOMADIK
 	select PL310_ERRATA_753970 if CACHE_PL310
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
+if ARCH_U8500
 
 config UX500_SOC_DB8500
 	bool
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index fe1f3e2..616b96e 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,14 +2,11 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o devices.o devices-common.o \
-				   id.o usb.o timer.o pm.o
+obj-y				:= cpu.o devices.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
-				board-mop500-uib.o board-mop500-stuib.o \
-				board-mop500-u8500uib.o \
 				board-mop500-pins.o \
 				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index ec08072..154e15f 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -68,40 +68,6 @@
 	.phy_channel = 1,
 };
 
-static struct platform_device *db8500_add_msp_i2s(struct device *parent,
-			int id,
-			resource_size_t base, int irq,
-			struct msp_i2s_platform_data *pdata)
-{
-	struct platform_device *pdev;
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_4K),
-		DEFINE_RES_IRQ(irq),
-	};
-
-	pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
-		id, irq);
-	pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
-						res, ARRAY_SIZE(res),
-						pdata, sizeof(*pdata));
-	if (!pdev) {
-		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
-			id);
-		return NULL;
-	}
-
-	return pdev;
-}
-
-/* Platform device for ASoC MOP500 machine */
-static struct platform_device snd_soc_mop500 = {
-	.name = "snd-soc-mop500",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
 struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
@@ -113,19 +79,3 @@
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
 };
-
-void mop500_audio_init(struct device *parent)
-{
-	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
-	platform_device_register(&snd_soc_mop500);
-
-	pr_info("Initialize MSP I2S-devices.\n");
-	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
-			   &msp0_platform_data);
-	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
-			   &msp1_platform_data);
-	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
-			   &msp2_platform_data);
-	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
-			   &msp3_platform_data);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index b3e61a3..26600a1 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -65,18 +65,6 @@
 #endif
 };
 
-static void sdi0_configure(struct device *parent)
-{
-	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
-}
-
-void mop500_sdi_tc35892_init(struct device *parent)
-{
-	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
-	sdi0_configure(parent);
-}
-
 /*
  * SDI1 (SDIO WLAN)
  */
@@ -178,42 +166,3 @@
 	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
 #endif
 };
-
-void __init mop500_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-
-	/*
-	 * On boards with the TC35892 GPIO expander, sdi0 will finally
-	 * be added when the TC35892 initializes and calls
-	 * mop500_sdi_tc35892_init() above.
-	 */
-}
-
-void __init snowball_sdi_init(struct device *parent)
-{
-	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
-	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
-	mop500_sdi0_data.cd_invert = true;
-	sdi0_configure(parent);
-}
-
-void __init hrefv60_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-	sdi0_configure(parent);
-	/* WLAN SDIO channel */
-	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
deleted file mode 100644
index 7e1f294..0000000
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mfd/stmpe.h>
-#include <linux/input/bu21013.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/input/matrix_keypad.h>
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* STMPE/SKE keypad use this key layout */
-static const unsigned int mop500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data mop500_keymap_data = {
-	.keymap		= mop500_keymap,
-	.keymap_size    = ARRAY_SIZE(mop500_keymap),
-};
-/*
- * STMPE1601
- */
-static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
-	.debounce_ms    = 64,
-	.scan_count     = 8,
-	.no_autorepeat  = true,
-	.keymap_data    = &mop500_keymap_data,
-};
-
-static struct stmpe_platform_data stmpe1601_data = {
-	.id		= 1,
-	.blocks		= STMPE_BLOCK_KEYPAD,
-	.irq_trigger    = IRQF_TRIGGER_FALLING,
-	.irq_base       = MOP500_STMPE1601_IRQ(0),
-	.keypad		= &stmpe1601_keypad_data,
-	.autosleep      = true,
-	.autosleep_timeout = 1024,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("stmpe1601", 0x40),
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.platform_data = &stmpe1601_data,
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-/*
- * BU21013 ROHM touchscreen interface on the STUIBs
- */
-
-#define TOUCH_GPIO_PIN  84
-
-#define TOUCH_XMAX	384
-#define TOUCH_YMAX	704
-
-#define PRCMU_CLOCK_OCR		0x1CC
-#define TSC_EXT_CLOCK_9_6MHZ	0x840000
-
-static struct bu21013_platform_device tsc_plat_device = {
-	.touch_pin = TOUCH_GPIO_PIN,
-	.touch_x_max = TOUCH_XMAX,
-	.touch_y_max = TOUCH_YMAX,
-	.ext_clk = false,
-	.x_flip = false,
-	.y_flip = true,
-};
-
-static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5C),
-		.platform_data = &tsc_plat_device,
-	},
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5D),
-		.platform_data = &tsc_plat_device,
-	},
-};
-
-void __init mop500_stuib_init(void)
-{
-	if (machine_is_hrefv60())
-		tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
-	else
-		tsc_plat_device.cs_pin = GPIO_BU21013_CS;
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
-			ARRAY_SIZE(mop500_i2c0_devices_stuib));
-
-	mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
-			ARRAY_SIZE(u8500_i2c3_devices_stuib));
-}
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
deleted file mode 100644
index d397c19..0000000
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Board data for the U8500 UIB, also known as the New UIB
- * License terms: GNU General Public License (GPL), version 2
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
-
-#include "irqs.h"
-
-#include "board-mop500.h"
-
-static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
-		.irq = NOMADIK_GPIO_TO_IRQ(84),
-	},
-};
-
-/*
- * TC35893
- */
-static const unsigned int u8500_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data u8500_keymap_data = {
-	.keymap		= u8500_keymap,
-	.keymap_size    = ARRAY_SIZE(u8500_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &u8500_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-
-void __init mop500_u8500uib_init(void)
-{
-	mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
-			ARRAY_SIZE(mop500_i2c3_devices_u8500));
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
-			ARRAY_SIZE(mop500_i2c0_devices_u8500));
-
-}
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
deleted file mode 100644
index bdaa422..0000000
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#define pr_fmt(fmt)	"mop500-uib: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-
-#include "board-mop500.h"
-#include "id.h"
-
-enum mop500_uib {
-	STUIB,
-	U8500UIB,
-};
-
-struct uib {
-	const char *name;
-	const char *option;
-	void (*init)(void);
-};
-
-static struct uib __initdata mop500_uibs[] = {
-	[STUIB] = {
-		.name	= "ST-UIB",
-		.option	= "stuib",
-		.init	= mop500_stuib_init,
-	},
-	[U8500UIB] = {
-		.name	= "U8500-UIB",
-		.option	= "u8500uib",
-		.init	= mop500_u8500uib_init,
-	},
-};
-
-static struct uib *mop500_uib;
-
-static int __init mop500_uib_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
-		struct uib *uib = &mop500_uibs[i];
-
-		if (!strcmp(str, uib->option)) {
-			mop500_uib = uib;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(mop500_uibs))
-		pr_err("invalid uib= option (%s)\n", str);
-
-	return 1;
-}
-__setup("uib=", mop500_uib_setup);
-
-/*
- * The UIBs are detected after the I2C host controllers are registered, so
- * i2c_register_board_info() can't be used.
- */
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n)
-{
-	struct i2c_adapter *adap;
-	struct i2c_client *client;
-	int i;
-
-	adap = i2c_get_adapter(busnum);
-	if (!adap) {
-		pr_err("failed to get adapter i2c%d\n", busnum);
-		return;
-	}
-
-	for (i = 0; i < n; i++) {
-		client = i2c_new_device(adap, &info[i]);
-		if (!client)
-			pr_err("failed to register %s to i2c%d\n",
-					info[i].type, busnum);
-	}
-
-	i2c_put_adapter(adap);
-}
-
-static void __init __mop500_uib_init(struct uib *uib, const char *why)
-{
-	pr_info("%s (%s)\n", uib->name, why);
-	uib->init();
-}
-
-/*
- * Detect the UIB attached based on the presence or absence of i2c devices.
- */
-int __init mop500_uib_init(void)
-{
-	struct uib *uib = mop500_uib;
-	struct i2c_adapter *i2c0;
-	int ret;
-
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
-	if (uib) {
-		__mop500_uib_init(uib, "from uib= boot argument");
-		return 0;
-	}
-
-	i2c0 = i2c_get_adapter(0);
-	if (!i2c0) {
-		__mop500_uib_init(&mop500_uibs[STUIB],
-				"fallback, could not get i2c0");
-		return -ENODEV;
-	}
-
-	/* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
-	ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
-			I2C_SMBUS_QUICK, NULL);
-	i2c_put_adapter(i2c0);
-
-	if (ret == 0)
-		uib = &mop500_uibs[U8500UIB];
-	else
-		uib = &mop500_uibs[STUIB];
-
-	__mop500_uib_init(uib, "detected");
-
-	return 0;
-}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index ad0806e..514d40b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -14,27 +14,16 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-nomadik.h>
 #include <linux/platform_data/db8500_thermal.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/amba/serial.h>
-#include <linux/spi/spi.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
-#include <linux/mfd/abx500/ab8500-gpio.h>
-#include <linux/mfd/abx500/ab8500-codec.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio_keys.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
@@ -46,7 +35,6 @@
 #include "setup.h"
 #include "devices.h"
 #include "irqs.h"
-#include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
@@ -54,401 +42,9 @@
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
 
-static struct gpio_led snowball_led_array[] = {
-	{
-		.name = "user_led",
-		.default_trigger = "heartbeat",
-		.gpio = 142,
-	},
-};
-
-static struct gpio_led_platform_data snowball_led_data = {
-	.leds = snowball_led_array,
-	.num_leds = ARRAY_SIZE(snowball_led_array),
-};
-
-static struct platform_device snowball_led_dev = {
-	.name = "leds-gpio",
-	.dev = {
-		.platform_data = &snowball_led_data,
-	},
-};
-
-static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
-       .supply_name            = "EN-3V3",
-       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
-       .microvolts             = 3300000,
-       .enable_high            = 1,
-       .init_data              = &gpio_en_3v3_regulator,
-       .startup_delay          = 5000, /* 1200us */
-};
-
-static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
-       .name   = "reg-fixed-voltage",
-       .id     = 1,
-       .dev    = {
-               .platform_data  = &snowball_gpio_en_3v3_data,
-       },
-};
-
-/* Dynamically populated. */
-static struct gpio sdi0_reg_gpios[] = {
-	{ 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" },
-};
-
-static struct gpio_regulator_state sdi0_reg_states[] = {
-	{ .value = 2900000, .gpios = (0 << 0) },
-	{ .value = 1800000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config sdi0_reg_info = {
-	.supply_name		= "ext-mmc-level-shifter",
-	.gpios			= sdi0_reg_gpios,
-	.nr_gpios		= ARRAY_SIZE(sdi0_reg_gpios),
-	.states			= sdi0_reg_states,
-	.nr_states		= ARRAY_SIZE(sdi0_reg_states),
-	.type			= REGULATOR_VOLTAGE,
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &sdi0_reg_init_data,
-	.startup_delay		= 100,
-};
-
-static struct platform_device sdi0_regulator = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &sdi0_reg_info,
-	},
-};
-
-static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
-	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
-};
-
-/* ab8500-codec */
-static struct ab8500_codec_platform_data ab8500_codec_pdata = {
-	.amics =  {
-		.mic1_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic2_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic1a_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic1b_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic2_micbias = AMIC_MICBIAS_VAMIC2
-	},
-	.ear_cmv = EAR_CMV_0_95V
-};
-
-static struct gpio_keys_button snowball_key_array[] = {
-	{
-		.gpio           = 32,
-		.type           = EV_KEY,
-		.code           = KEY_1,
-		.desc           = "userpb",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 151,
-		.type           = EV_KEY,
-		.code           = KEY_2,
-		.desc           = "extkb1",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 152,
-		.type           = EV_KEY,
-		.code           = KEY_3,
-		.desc           = "extkb2",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 161,
-		.type           = EV_KEY,
-		.code           = KEY_4,
-		.desc           = "extkb3",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 162,
-		.type           = EV_KEY,
-		.code           = KEY_5,
-		.desc           = "extkb4",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-};
-
-static struct gpio_keys_platform_data snowball_key_data = {
-	.buttons        = snowball_key_array,
-	.nbuttons       = ARRAY_SIZE(snowball_key_array),
-};
-
-static struct platform_device snowball_key_dev = {
-	.name           = "gpio-keys",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &snowball_key_data,
-	}
-};
-
-static struct smsc911x_platform_config snowball_sbnet_cfg = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.shift = 1,
-};
-
-static struct resource sbnet_res[] = {
-	{
-		.name = "smsc911x-memory",
-		.start = (0x5000 << 16),
-		.end  =  (0x5000 << 16) + 0xffff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = NOMADIK_GPIO_TO_IRQ(140),
-		.end = NOMADIK_GPIO_TO_IRQ(140),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device snowball_sbnet_dev = {
-	.name           = "smsc911x",
-	.num_resources  = ARRAY_SIZE(sbnet_res),
-	.resource       = sbnet_res,
-	.dev            = {
-		.platform_data = &snowball_sbnet_cfg,
-	},
-};
-
 struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator	= &ab8500_regulator_plat_data,
-	.gpio		= &ab8500_gpio_pdata,
-	.codec		= &ab8500_codec_pdata,
-};
-
-static struct platform_device u8500_cpufreq_cooling_device = {
-	.name           = "db8500-cpufreq-cooling",
-};
-
-/*
- * TPS61052
- */
-
-static struct tps6105x_platform_data mop500_tps61052_data = {
-	.mode = TPS6105X_MODE_VOLTAGE,
-	.regulator_data = &tps61052_regulator,
-};
-
-/*
- * TC35892
- */
-
-static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
-{
-	struct device *parent = NULL;
-#if 0
-	/* FIXME: Is the sdi actually part of tc3589x? */
-	parent = tc3589x->dev;
-#endif
-	mop500_sdi_tc35892_init(parent);
-}
-
-static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
-	.gpio_base	= MOP500_EGPIO(0),
-	.setup		= mop500_tc35892_init,
-};
-
-static struct tc3589x_platform_data mop500_tc35892_data = {
-	.block		= TC3589x_BLOCK_GPIO,
-	.gpio		= &mop500_tc35892_gpio_data,
-	.irq_base	= MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct lp55xx_led_config lp5521_pri_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_pri_data = {
-       .label = "lp5521_pri",
-       .led_config     = &lp5521_pri_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-static struct lp55xx_led_config lp5521_sec_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_sec_data = {
-       .label = "lp5521_sec",
-       .led_config     = &lp5521_sec_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-/* I2C0 devices only available on the first HREF/MOP500 */
-static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x42),
-		.irq		= NOMADIK_GPIO_TO_IRQ(217),
-		.platform_data  = &mop500_tc35892_data,
-	},
-	{
-		I2C_BOARD_INFO("tps61052", 0x33),
-		.platform_data  = &mop500_tps61052_data,
-	},
-};
-
-static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
-	{
-		/* lp5521 LED driver, 1st device */
-		I2C_BOARD_INFO("lp5521", 0x33),
-		.platform_data = &lp5521_pri_data,
-	},
-	{
-		/* lp5521 LED driver, 2st device */
-		I2C_BOARD_INFO("lp5521", 0x34),
-		.platform_data = &lp5521_sec_data,
-	},
-	{
-		/* Light sensor Rohm BH1780GLI */
-		I2C_BOARD_INFO("bh1780", 0x29),
-	},
-};
-
-static int __init mop500_i2c_board_init(void)
-{
-	if (machine_is_u8500())
-		mop500_uib_i2c_add(0, mop500_i2c0_devices,
-				   ARRAY_SIZE(mop500_i2c0_devices));
-	mop500_uib_i2c_add(2, mop500_i2c2_devices,
-			   ARRAY_SIZE(mop500_i2c2_devices));
-	return 0;
-}
-device_initcall(mop500_i2c_board_init);
-
-static void __init mop500_i2c_init(struct device *parent)
-{
-	db8500_add_i2c0(parent, NULL);
-	db8500_add_i2c1(parent, NULL);
-	db8500_add_i2c2(parent, NULL);
-	db8500_add_i2c3(parent, NULL);
-}
-
-static struct gpio_keys_button mop500_gpio_keys[] = {
-	{
-		.desc			= "SFH7741 Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.active_low		= 0,
-		.can_disable		= 1,
-	}
-};
-
-static struct regulator *prox_regulator;
-static int mop500_prox_activate(struct device *dev);
-static void mop500_prox_deactivate(struct device *dev);
-
-static struct gpio_keys_platform_data mop500_gpio_keys_data = {
-	.buttons	= mop500_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
-	.enable		= mop500_prox_activate,
-	.disable	= mop500_prox_deactivate,
-};
-
-static struct platform_device mop500_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &mop500_gpio_keys_data,
-	},
-};
-
-static int mop500_prox_activate(struct device *dev)
-{
-	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
-						"vcc");
-	if (IS_ERR(prox_regulator)) {
-		dev_err(&mop500_gpio_keys_device.dev,
-			"no regulator\n");
-		return PTR_ERR(prox_regulator);
-	}
-
-	return regulator_enable(prox_regulator);
-}
-
-static void mop500_prox_deactivate(struct device *dev)
-{
-	regulator_disable(prox_regulator);
-	regulator_put(prox_regulator);
-}
-
-static struct cryp_platform_data u8500_cryp1_platform_data = {
-		.mem_to_engine = {
-				.dir = DMA_MEM_TO_DEV,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		},
-		.engine_to_mem = {
-				.dir = DMA_DEV_TO_MEM,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		}
-};
-
-static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
-		.dir = DMA_MEM_TO_DEV,
-		.dev_type = DB8500_DMA_DEV50_HAC1_TX,
-		.mode = STEDMA40_MODE_LOGICAL,
-};
-
-static struct hash_platform_data u8500_hash1_platform_data = {
-		.mem_to_engine = &u8500_hash_dma_cfg_tx,
-		.dma_filter = stedma40_filter,
-};
-
-/* add any platform devices here - TODO */
-static struct platform_device *mop500_platform_devs[] __initdata = {
-	&mop500_gpio_keys_device,
-	&sdi0_regulator,
 };
 
 #ifdef CONFIG_STE_DMA40
@@ -480,236 +76,3 @@
 	 */
 	.num_chipselect = 5,
 };
-
-static void __init mop500_spi_init(struct device *parent)
-{
-	db8500_add_ssp0(parent, &ssp0_plat);
-}
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-#endif
-
-struct amba_pl011_data uart0_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart0_dma_cfg_rx,
-	.dma_tx_param = &uart0_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart1_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart1_dma_cfg_rx,
-	.dma_tx_param = &uart1_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart2_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart2_dma_cfg_rx,
-	.dma_tx_param = &uart2_dma_cfg_tx,
-#endif
-};
-
-static void __init mop500_uart_init(struct device *parent)
-{
-	db8500_add_uart0(parent, &uart0_plat);
-	db8500_add_uart1(parent, &uart1_plat);
-	db8500_add_uart2(parent, &uart2_plat);
-}
-
-static void __init u8500_cryp1_hash1_init(struct device *parent)
-{
-	db8500_add_cryp1(parent, &u8500_cryp1_platform_data);
-	db8500_add_hash1(parent, &u8500_hash1_platform_data);
-}
-
-static struct platform_device *snowball_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-	&snowball_sbnet_dev,
-	&snowball_gpio_en_3v3_regulator_dev,
-	&u8500_cpufreq_cooling_device,
-	&sdi0_regulator,
-};
-
-static void __init mop500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
-	sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN;
-	sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
-
-	mop500_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	mop500_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-	u8500_cryp1_hash1_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-
-static void __init snowball_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-
-	sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
-
-	snowball_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
-		snowball_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(snowball_platform_devs,
-			ARRAY_SIZE(snowball_platform_devs));
-
-	mop500_i2c_init(parent);
-	snowball_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	u8500_cryp1_hash1_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init hrefv60_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	/*
-	 * The HREFv60 board removed a GPIO expander and routed
-	 * all these GPIO pins to the internal GPIO controller
-	 * instead.
-	 */
-	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-
-	sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
-
-	hrefv60_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	hrefv60_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
-	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-	.restart        = ux500_restart,
-MACHINE_END
-
-MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
-	.atag_offset	= 0x100,
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-	.restart        = ux500_restart,
-MACHINE_END
-
-MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= hrefv60_init_machine,
-	.init_late	= ux500_init_late,
-	.restart        = ux500_restart,
-MACHINE_END
-
-MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= snowball_init_machine,
-	.init_late	= NULL,
-	.restart        = ux500_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index d6fab16..511d6fe 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -79,7 +79,6 @@
 #define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */
 
 struct device;
-struct i2c_board_info;
 extern struct mmci_platform_data mop500_sdi0_data;
 extern struct mmci_platform_data mop500_sdi1_data;
 extern struct mmci_platform_data mop500_sdi2_data;
@@ -88,25 +87,10 @@
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;
 extern struct msp_i2s_platform_data msp3_platform_data;
-extern struct arm_pmu_platdata db8500_pmu_platdata;
-extern struct amba_pl011_data uart0_plat;
-extern struct amba_pl011_data uart1_plat;
-extern struct amba_pl011_data uart2_plat;
 extern struct pl022_ssp_controller ssp0_plat;
-extern struct stedma40_platform_data dma40_plat_data;
 
-extern void mop500_sdi_init(struct device *parent);
-extern void snowball_sdi_init(struct device *parent);
-extern void hrefv60_sdi_init(struct device *parent);
-extern void mop500_sdi_tc35892_init(struct device *parent);
-void __init mop500_u8500uib_init(void);
-void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
-void mop500_audio_init(struct device *parent);
 
-int __init mop500_uib_init(void);
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n);
 #endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 301c346..2e85c1e 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -32,7 +32,6 @@
 #include "irqs.h"
 
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
 #include "board-mop500.h"
 #include "id.h"
@@ -93,14 +92,6 @@
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 }
 
-static struct resource db8500_pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_DB8500_PMU,
-		.end		= IRQ_DB8500_PMU,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
 /*
  * The PMU IRQ lines of two cores are wired together into a single interrupt.
  * Bounce the interrupt to the other core if it's not ours.
@@ -125,54 +116,6 @@
 	.handle_irq		= db8500_pmu_handler,
 };
 
-static struct platform_device db8500_pmu_device = {
-	.name			= "arm-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
-	.resource		= db8500_pmu_resources,
-	.dev.platform_data	= &db8500_pmu_platdata,
-};
-
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
-	&db8500_pmu_device,
-};
-
-static resource_size_t __initdata db8500_gpio_base[] = {
-	U8500_GPIOBANK0_BASE,
-	U8500_GPIOBANK1_BASE,
-	U8500_GPIOBANK2_BASE,
-	U8500_GPIOBANK3_BASE,
-	U8500_GPIOBANK4_BASE,
-	U8500_GPIOBANK5_BASE,
-	U8500_GPIOBANK6_BASE,
-	U8500_GPIOBANK7_BASE,
-	U8500_GPIOBANK8_BASE,
-};
-
-static void __init db8500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		.supports_sleepmode = true,
-	};
-
-	dbx500_add_gpios(parent, db8500_gpio_base,
-			 ARRAY_SIZE(db8500_gpio_base),
-			 IRQ_DB8500_GPIO0, &pdata);
-	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
-}
-
-static int usb_db8500_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
-};
-
 static const char *db8500_read_soc_id(void)
 {
 	void __iomem *uid = __io_address(U8500_BB_UID_BASE);
@@ -192,60 +135,22 @@
 	return ux500_soc_device_init(soc_id);
 }
 
-/*
- * This function is called from the board init
- */
-struct device * __init u8500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db8500_soc_device_init();
-
-	db8500_add_rtc(parent);
-	db8500_add_gpios(parent);
-	db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
-
-	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
-		platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	return parent;
-}
-
 #ifdef CONFIG_MACH_UX500_DT
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
-	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  NULL),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  NULL),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  NULL),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  NULL),
-	/* Requires clock name bindings. */
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
-	OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		       "ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		       "ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		       "ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		       "ux500-msp-i2s.3", &msp3_platform_data),
+	/* Requires non-DT:able platform data. */
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
-	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
 	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -253,17 +158,6 @@
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
-	/* Requires clock name and DMA bindings. */
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
-		"ux500-msp-i2s.0", &msp0_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
-		"ux500-msp-i2s.1", &msp1_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
-		"ux500-msp-i2s.2", &msp2_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
-		"ux500-msp-i2s.3", &msp3_platform_data),
-	/* Requires clock name bindings and channel address lookup table. */
-	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
 	{},
 };
 
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5d7eebc..f84d439 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -78,9 +78,17 @@
 	if (cpu_is_u8500_family()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
-		u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
+
+		if (of_have_populated_dt())
+			u8500_of_clk_init(U8500_CLKRST1_BASE,
+					  U8500_CLKRST2_BASE,
+					  U8500_CLKRST3_BASE,
+					  U8500_CLKRST5_BASE,
+					  U8500_CLKRST6_BASE);
+		else
+			u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+				       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
+				       U8500_CLKRST6_BASE);
 	} else if (cpu_is_u9540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
@@ -96,11 +104,6 @@
 	}
 }
 
-void __init ux500_init_late(void)
-{
-	mop500_uib_init();
-}
-
 static const char * __init ux500_get_machine(void)
 {
 	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
deleted file mode 100644
index f71b3d7..0000000
--- a/arch/arm/mach-ux500/devices-common.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-
-#include "irqs.h"
-
-#include "devices-common.h"
-
-static struct platform_device *
-dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
-		struct nmk_gpio_platform_data *pdata)
-{
-	struct resource resources[] = {
-		{
-			.start	= addr,
-			.end	= addr + 127,
-			.flags	= IORESOURCE_MEM,
-		},
-		{
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return platform_device_register_resndata(
-		parent,
-		"gpio",
-		id,
-		resources,
-		ARRAY_SIZE(resources),
-		pdata,
-		sizeof(*pdata));
-}
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata)
-{
-	int first = 0;
-	int i;
-
-	for (i = 0; i < num; i++, first += 32, irq++) {
-		pdata->first_gpio = first;
-		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
-		pdata->num_gpio = 32;
-
-		dbx500_add_gpio(parent, i, base[i], irq, pdata);
-	}
-}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
deleted file mode 100644
index 96fa4ac..0000000
--- a/arch/arm/mach-ux500/devices-common.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_COMMON_H
-#define __DEVICES_COMMON_H
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_data/i2c-nomadik.h>
-#include <linux/platform_data/crypto-ux500.h>
-
-struct spi_master_cntlr;
-
-static inline struct amba_device *
-dbx500_add_msp_spi(struct device *parent, const char *name,
-		   resource_size_t base, int irq,
-		   struct spi_master_cntlr *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct spi_master_cntlr *pdata,
-	       u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct mmci_platform_data;
-
-static inline struct amba_device *
-dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct mmci_platform_data *pdata, u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct amba_pl011_data;
-
-static inline struct amba_device *
-dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
-		int irq, struct amba_pl011_data *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-struct nmk_i2c_controller;
-
-static inline struct amba_device *
-dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
-	       struct nmk_i2c_controller *data)
-{
-	/* Conjure a name similar to what the platform device used to have */
-	char name[16];
-
-	snprintf(name, sizeof(name), "nmk-i2c.%d", id);
-	return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
-{
-	return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq,
-				0, NULL, 0);
-}
-
-struct cryp_platform_data;
-
-static inline struct platform_device *
-dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq,
-		struct cryp_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-			DEFINE_RES_IRQ(irq),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "cryp1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct hash_platform_data;
-
-static inline struct platform_device *
-dbx500_add_hash1(struct device *parent, int id, resource_size_t base,
-		struct hash_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "hash1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct nmk_gpio_platform_data;
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata);
-
-static inline void
-dbx500_add_pinctrl(struct device *parent, const char *name,
-		   resource_size_t base)
-{
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_8K),
-	};
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = name,
-		.id = -1,
-		.res = res,
-		.num_res = ARRAY_SIZE(res),
-	};
-
-	platform_device_register_full(&pdevinfo);
-}
-
-#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index bc31606..c59f89d 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -9,10 +9,8 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/platform_data/dma-ste-dma40.h>
 #include <linux/mfd/dbx500-prcmu.h>
 
 #include "setup.h"
@@ -20,62 +18,6 @@
 
 #include "db8500-regs.h"
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U8500_DMA_BASE,
-		.end   = U8500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U8500_DMA_LCPA_BASE,
-		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB8500_DMA,
-		.end   = IRQ_DB8500_DMA,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct stedma40_platform_data dma40_plat_data = {
-	.disabled_channels = {-1},
-};
-
-struct platform_device u8500_dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.name = "dma40",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dma40_resources),
-	.resource = dma40_resources
-};
-
-struct resource keypad_resources[] = {
-	[0] = {
-		.start = U8500_SKE_BASE,
-		.end = U8500_SKE_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DB8500_KB,
-		.end = IRQ_DB8500_KB,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device u8500_ske_keypad_device = {
-	.name = "nmk-ske-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(keypad_resources),
-	.resource = keypad_resources,
-};
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
@@ -84,39 +26,3 @@
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
 };
-
-static struct resource db8500_prcmu_res[] = {
-	{
-		.name  = "prcmu",
-		.start = U8500_PRCMU_BASE,
-		.end   = U8500_PRCMU_BASE + SZ_8K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "prcmu-tcdm",
-		.start = U8500_PRCMU_TCDM_BASE,
-		.end   = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "irq",
-		.start = IRQ_DB8500_PRCMU1,
-		.end   = IRQ_DB8500_PRCMU1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "prcmu-tcpm",
-		.start = U8500_PRCMU_TCPM_BASE,
-		.end   = U8500_PRCMU_TCPM_BASE + SZ_32K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device db8500_prcmu_device = {
-	.name			= "db8500-prcmu",
-	.resource		= db8500_prcmu_res,
-	.num_resources		= ARRAY_SIZE(db8500_prcmu_res),
-	.dev = {
-		.platform_data = &db8500_prcmu_pdata,
-	},
-};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3219983..b8ffc99 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,122 +8,12 @@
 #ifndef __DEVICES_DB8500_H
 #define __DEVICES_DB8500_H
 
-#include <linux/platform_data/usb-musb-ux500.h>
 #include "irqs.h"
 #include "db8500-regs.h"
-#include "devices-common.h"
 
-struct ske_keypad_platform_data;
-struct pl022_ssp_controller;
 struct platform_device;
 
 extern struct ab8500_platform_data ab8500_platdata;
 extern struct prcmu_pdata db8500_prcmu_pdata;
-extern struct platform_device db8500_prcmu_device;
 
-static inline struct platform_device *
-db8500_add_ske_keypad(struct device *parent,
-		      struct ske_keypad_platform_data *pdata,
-		      size_t size)
-{
-	struct resource resources[] = {
-		DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
-		DEFINE_RES_IRQ(IRQ_DB8500_KB),
-	};
-
-	return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
-						 resources, 2, pdata, size);
-}
-
-static inline struct amba_device *
-db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct pl022_ssp_controller *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-#define db8500_add_i2c0(parent, pdata) \
-	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(parent, pdata) \
-	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
-			   IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
-			   IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U8500_USBOTG_BASE, \
-		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
-		       IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
-		       IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
-		       IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
-		       IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
-		       IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
-		       IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(parent, pdata) \
-	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
-		       IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(parent, pdata) \
-	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
-		       IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
-		       IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
-		       IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
-		       IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
-		       IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(parent, pdata) \
-	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
-			IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(parent, pdata) \
-	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
-			IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(parent, pdata) \
-	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
-			IRQ_DB8500_UART2, pdata)
-
-#define db8500_add_cryp1(parent, pdata) \
-	dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata)
-#define db8500_add_hash1(parent, pdata) \
-	dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata)
 #endif
diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h
index cbc6f1e..5bca7c6 100644
--- a/arch/arm/mach-ux500/devices.h
+++ b/arch/arm/mach-ux500/devices.h
@@ -10,14 +10,6 @@
 struct platform_device;
 struct amba_device;
 
-extern struct platform_device u8500_gpio_devs[];
-
 extern struct amba_device ux500_pl031_device;
 
-extern struct platform_device ux500_hash1_device;
-extern struct platform_device ux500_cryp1_device;
-
-extern struct platform_device u8500_dma40_device;
-extern struct platform_device ux500_ske_keypad_device;
-
 #endif
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index 656324a..bdb3564 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -24,7 +24,6 @@
 extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
-extern void __init ux500_init_late(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index b6bd0ef..05a4ff7 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -97,8 +97,8 @@
 	 * sched_clock with higher rating then MTU since is always-on.
 	 *
 	 */
-
-	nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
+	if (!of_have_populated_dt())
+		nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
deleted file mode 100644
index b7bd8d3..0000000
--- a/arch/arm/mach-ux500/usb.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/usb-musb-ux500.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include "db8500-regs.h"
-
-#define MUSB_DMA40_RX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_DEV_TO_MEM, \
-	}
-
-#define MUSB_DMA40_TX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_MEM_TO_DEV, \
-	}
-
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH
-};
-
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-};
-
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_rx_ch[0],
-	&musb_dma_rx_ch[1],
-	&musb_dma_rx_ch[2],
-	&musb_dma_rx_ch[3],
-	&musb_dma_rx_ch[4],
-	&musb_dma_rx_ch[5],
-	&musb_dma_rx_ch[6],
-	&musb_dma_rx_ch[7]
-};
-
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_tx_ch[0],
-	&musb_dma_tx_ch[1],
-	&musb_dma_tx_ch[2],
-	&musb_dma_tx_ch[3],
-	&musb_dma_tx_ch[4],
-	&musb_dma_tx_ch[5],
-	&musb_dma_tx_ch[6],
-	&musb_dma_tx_ch[7]
-};
-
-static struct ux500_musb_board_data musb_board_data = {
-	.dma_rx_param_array = ux500_dma_rx_param_array,
-	.dma_tx_param_array = ux500_dma_tx_param_array,
-	.dma_filter = stedma40_filter,
-};
-
-static struct musb_hdrc_platform_data musb_platform_data = {
-	.mode = MUSB_OTG,
-	.board_data = &musb_board_data,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.name	= "usb-mem",
-		.flags	=  IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.name   = "mc", /* hard-coded in musb */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ux500_musb_device = {
-	.name = "musb-ux500",
-	.id = 0,
-	.dev = {
-		.platform_data = &musb_platform_data,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(usb_resources),
-	.resource = usb_resources,
-};
-
-static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_rx_ch[idx].dev_type = dev_type[idx];
-}
-
-static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_tx_ch[idx].dev_type = dev_type[idx];
-}
-
-void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
-		   int *dma_rx_cfg, int *dma_tx_cfg)
-{
-	ux500_musb_device.resource[0].start = base;
-	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-	ux500_musb_device.resource[1].start = irq;
-	ux500_musb_device.resource[1].end = irq;
-
-	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
-	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
-
-	ux500_musb_device.dev.parent = parent;
-
-	platform_device_register(&ux500_musb_device);
-}
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 3657954..d7e7422 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -4,14 +4,12 @@
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_CLK
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select ICST
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 95a469e..4f8b8cb 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -1,12 +1,10 @@
 /*
  * Versatile Express V2M Motherboard Support
  */
-#include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
@@ -22,7 +20,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/vexpress.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
@@ -422,16 +419,8 @@
 			pr_warning("vexpress: DT HBI (%x) is not matching "
 					"hardware (%x)!\n", dt_hbi, hbi);
 	}
-}
 
-static void __init v2m_dt_timer_init(void)
-{
-	of_clk_init(NULL);
-
-	clocksource_of_init();
-
-	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
-				24000000);
+	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
 }
 
 static const struct of_device_id v2m_dt_bus_match[] __initconst = {
@@ -458,6 +447,5 @@
 	.smp_init	= smp_init_ops(vexpress_smp_init_ops),
 	.map_io		= v2m_dt_map_io,
 	.init_early	= v2m_dt_init_early,
-	.init_time	= v2m_dt_timer_init,
 	.init_machine	= v2m_dt_init,
 MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 9b25293..927be93 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -5,7 +5,6 @@
 	select CLKDEV_LOOKUP
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select VT8500_TIMER
 	select PINCTRL
 	help
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
deleted file mode 100644
index 087787a..0000000
--- a/arch/arm/mach-vt8500/common.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-vt8500/dt_common.h
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-
-#include <linux/of.h>
-
-/* defined in drivers/clk/clk-vt8500.c */
-void __init vtwm_clk_init(void __iomem *pmc_base);
-
-#endif
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index eefaa60..4a73464 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,7 +18,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
@@ -33,8 +32,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include "common.h"
-
 #define LEGACY_GPIO_BASE	0xD8110000
 #define LEGACY_PMC_BASE		0xD8130000
 
@@ -162,8 +159,6 @@
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 
-	vtwm_clk_init(pmc_base);
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -180,7 +175,6 @@
 	.dt_compat	= vt8500_dt_compat,
 	.map_io		= vt8500_map_io,
 	.init_machine	= vt8500_init,
-	.init_time	= clocksource_of_init,
 	.restart	= vt8500_restart,
 MACHINE_END
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 0376606..01619c2 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1965,7 +1965,6 @@
 static struct irqaction omap24xx_dma_irq = {
 	.name = "DMA",
 	.handler = omap2_dma_irq_handler,
-	.flags = IRQF_DISABLED
 };
 
 #else
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 7dfba93..6d95d60 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -382,11 +382,6 @@
 	help
 	  Compile in platform device definition for TV interface
 
-config S5P_DEV_USB_EHCI
-	bool
-	help
-	  Compile in platform device definition for USB EHCI
-
 config S3C24XX_PWM
 	bool "PWM device support"
 	select PWM
@@ -395,11 +390,6 @@
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
-
 config S3C_SETUP_CAMIF
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 498c7c2..9267d29 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -38,7 +38,6 @@
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 8ce0ac0..99a3590 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <media/s5p_hdmi.h>
 
@@ -49,7 +50,6 @@
 #include <plat/devs.h>
 #include <plat/adc.h>
 #include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
 #include <plat/hdmi.h>
@@ -1359,39 +1359,6 @@
 }
 #endif /* CONFIG_PLAT_S3C24XX */
 
-/* USB EHCI Host Controller */
-
-#ifdef CONFIG_S5P_DEV_USB_EHCI
-static struct resource s5p_ehci_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
-};
-
-struct platform_device s5p_device_ehci = {
-	.name		= "s5p-ehci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_ehci_resource),
-	.resource	= s5p_ehci_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
-{
-	struct s5p_ehci_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
-			&s5p_device_ehci);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
-#endif /* CONFIG_S5P_DEV_USB_EHCI */
-
 /* USB HSOTG */
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
@@ -1499,8 +1466,10 @@
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C24XX_DMAC)
+	pd.filter = s3c24xx_dma_filter;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 4fb1f03..335beb3 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -87,8 +87,12 @@
 #endif
 
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c6400()	is_samsung_s3c6400()
+# define soc_is_s3c6410()	is_samsung_s3c6410()
 # define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
 #else
+# define soc_is_s3c6400()	0
+# define soc_is_s3c6410()	0
 # define soc_is_s3c64xx()	0
 #endif
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 0dc4ac4..eece188 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -75,7 +75,6 @@
 extern struct platform_device s3c_device_usb_hsudc;
 extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device s5p_device_ehci;
 extern struct platform_device s5p_device_fimc0;
 extern struct platform_device s5p_device_fimc1;
 extern struct platform_device s5p_device_fimc2;
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 50a3ea0..aa9511b 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -11,12 +11,18 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used on S3C64xx when booting with
+ * Device Tree support.
+ */
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <mach/hardware.h>
 
@@ -148,8 +154,12 @@
 
 	// do the correct init for cpu
 
-	if (cpu == NULL)
+	if (cpu == NULL) {
+		/* Not needed when booting with device tree. */
+		if (of_have_populated_dt())
+			return 0;
 		panic("s3c_arch_init: NULL cpu\n");
+	}
 
 	ret = (cpu->init)();
 	if (ret != 0)
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
deleted file mode 100644
index 66df315..0000000
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c044548..ce6ae94 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1,6 +1,7 @@
 config ARM64
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select ARCH_WANT_FRAME_POINTERS
@@ -61,10 +62,6 @@
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-config GENERIC_LOCKBREAK
-	def_bool y
-	depends on SMP && PREEMPT
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -138,6 +135,11 @@
 	  look-up. AArch32 emulation is not available when this feature
 	  is enabled.
 
+config CPU_BIG_ENDIAN
+       bool "Build big-endian kernel"
+       help
+         Say Y if you plan on running a kernel in big-endian mode.
+
 config SMP
 	bool "Symmetric Multi-Processing"
 	select USE_GENERIC_SMP_HELPERS
@@ -160,6 +162,13 @@
 	default "8" if ARCH_XGENE
 	default "4"
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
 source kernel/Kconfig.preempt
 
 config HZ
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index d90cf79..2fceb71 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -20,9 +20,15 @@
 KBUILD_DEFCONFIG := defconfig
 
 KBUILD_CFLAGS	+= -mgeneral-regs-only
+ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
+KBUILD_CPPFLAGS	+= -mbig-endian
+AS		+= -EB
+LD		+= -EB
+else
 KBUILD_CPPFLAGS	+= -mlittle-endian
 AS		+= -EL
 LD		+= -EL
+endif
 
 comma = ,
 
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 31c81e9..84139be 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -26,7 +26,7 @@
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_XGENE=y
 CONFIG_SMP=y
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_PREEMPT=y
 CONFIG_CMDLINE="console=ttyAMA0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 5aceb83..fd3e392 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -115,3 +115,34 @@
 	.align	7
 	b	\label
 	.endm
+
+/*
+ * Select code when configured for BE.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define CPU_BE(code...) code
+#else
+#define CPU_BE(code...)
+#endif
+
+/*
+ * Select code when configured for LE.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define CPU_LE(code...)
+#else
+#define CPU_LE(code...) code
+#endif
+
+/*
+ * Define a macro that constructs a 64-bit value by concatenating two
+ * 32-bit registers. Note that on big endian systems the order of the
+ * registers is swapped.
+ */
+#ifndef CONFIG_CPU_BIG_ENDIAN
+	.macro	regs_to_64, rd, lbits, hbits
+#else
+	.macro	regs_to_64, rd, hbits, lbits
+#endif
+	orr	\rd, \lbits, \hbits, lsl #32
+	.endm
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index 8a8ce0e..3914c0d 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -173,4 +173,6 @@
 #define cmpxchg64(ptr,o,n)		cmpxchg((ptr),(o),(n))
 #define cmpxchg64_local(ptr,o,n)	cmpxchg_local((ptr),(o),(n))
 
+#define cmpxchg64_relaxed(ptr,o,n)	cmpxchg_local((ptr),(o),(n))
+
 #endif	/* __ASM_CMPXCHG_H */
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index 899af80..fda2704 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -26,7 +26,11 @@
 #include <linux/ptrace.h>
 
 #define COMPAT_USER_HZ		100
+#ifdef __AARCH64EB__
+#define COMPAT_UTS_MACHINE	"armv8b\0\0"
+#else
 #define COMPAT_UTS_MACHINE	"armv8l\0\0"
+#endif
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
@@ -73,13 +77,23 @@
 };
 
 struct compat_stat {
+#ifdef __AARCH64EB__
+	short		st_dev;
+	short		__pad1;
+#else
 	compat_dev_t	st_dev;
+#endif
 	compat_ino_t	st_ino;
 	compat_mode_t	st_mode;
 	compat_ushort_t	st_nlink;
 	__compat_uid16_t	st_uid;
 	__compat_gid16_t	st_gid;
+#ifdef __AARCH64EB__
+	short		st_rdev;
+	short		__pad2;
+#else
 	compat_dev_t	st_rdev;
+#endif
 	compat_off_t	st_size;
 	compat_off_t	st_blksize;
 	compat_off_t	st_blocks;
diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h
new file mode 100644
index 0000000..c4cdb5e
--- /dev/null
+++ b/arch/arm64/include/asm/cpu_ops.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CPU_OPS_H
+#define __ASM_CPU_OPS_H
+
+#include <linux/init.h>
+#include <linux/threads.h>
+
+struct device_node;
+
+/**
+ * struct cpu_operations - Callback operations for hotplugging CPUs.
+ *
+ * @name:	Name of the property as appears in a devicetree cpu node's
+ *		enable-method property.
+ * @cpu_init:	Reads any data necessary for a specific enable-method from the
+ *		devicetree, for a given cpu node and proposed logical id.
+ * @cpu_prepare: Early one-time preparation step for a cpu. If there is a
+ *		mechanism for doing so, tests whether it is possible to boot
+ *		the given CPU.
+ * @cpu_boot:	Boots a cpu into the kernel.
+ * @cpu_postboot: Optionally, perform any post-boot cleanup or necesary
+ *		synchronisation. Called from the cpu being booted.
+ * @cpu_disable: Prepares a cpu to die. May fail for some mechanism-specific
+ * 		reason, which will cause the hot unplug to be aborted. Called
+ * 		from the cpu to be killed.
+ * @cpu_die:	Makes a cpu leave the kernel. Must not fail. Called from the
+ *		cpu being killed.
+ */
+struct cpu_operations {
+	const char	*name;
+	int		(*cpu_init)(struct device_node *, unsigned int);
+	int		(*cpu_prepare)(unsigned int);
+	int		(*cpu_boot)(unsigned int);
+	void		(*cpu_postboot)(void);
+#ifdef CONFIG_HOTPLUG_CPU
+	int		(*cpu_disable)(unsigned int cpu);
+	void		(*cpu_die)(unsigned int cpu);
+#endif
+};
+
+extern const struct cpu_operations *cpu_ops[NR_CPUS];
+extern int __init cpu_read_ops(struct device_node *dn, int cpu);
+extern void __init cpu_read_bootcpu_ops(void);
+
+#endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index e7fa87f..01d3aab 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -90,11 +90,24 @@
  * These are used to set parameters in the core dumps.
  */
 #define ELF_CLASS	ELFCLASS64
+#ifdef __AARCH64EB__
+#define ELF_DATA	ELFDATA2MSB
+#else
 #define ELF_DATA	ELFDATA2LSB
+#endif
 #define ELF_ARCH	EM_AARCH64
 
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
 #define ELF_PLATFORM_SIZE	16
+#ifdef __AARCH64EB__
+#define ELF_PLATFORM		("aarch64_be")
+#else
 #define ELF_PLATFORM		("aarch64")
+#endif
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.
@@ -149,7 +162,12 @@
 #define arch_randomize_brk arch_randomize_brk
 
 #ifdef CONFIG_COMPAT
+
+#ifdef __AARCH64EB__
+#define COMPAT_ELF_PLATFORM		("v8b")
+#else
 #define COMPAT_ELF_PLATFORM		("v8l")
+#endif
 
 #define COMPAT_ELF_ET_DYN_BASE		(randomize_et_dyn(2 * TASK_SIZE_32 / 3))
 
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 1d12f89..b56e5b5 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -224,6 +224,7 @@
  */
 extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot);
 extern void __iounmap(volatile void __iomem *addr);
+extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 
 #define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
 #define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
@@ -233,7 +234,6 @@
 #define ioremap(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define ioremap_nocache(addr, size)	__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
-#define ioremap_cached(addr, size)	__ioremap((addr), (size), __pgprot(PROT_NORMAL))
 #define iounmap				__iounmap
 
 #define PROT_SECT_DEFAULT	(PMD_TYPE_SECT | PMD_SECT_AF)
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index 0332fc0..e1f7ecd 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -4,6 +4,7 @@
 #include <asm-generic/irq.h>
 
 extern void (*handle_arch_irq)(struct pt_regs *);
+extern void migrate_irqs(void);
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 
 #endif
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 20925bc..3776217 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -33,18 +33,23 @@
 #define UL(x) _AC(x, UL)
 
 /*
- * PAGE_OFFSET - the virtual address of the start of the kernel image.
+ * PAGE_OFFSET - the virtual address of the start of the kernel image (top
+ *		 (VA_BITS - 1))
  * VA_BITS - the maximum number of bits for virtual addresses.
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 128MB of the kernel text.
  */
-#define PAGE_OFFSET		UL(0xffffffc000000000)
+#ifdef CONFIG_ARM64_64K_PAGES
+#define VA_BITS			(42)
+#else
+#define VA_BITS			(39)
+#endif
+#define PAGE_OFFSET		(UL(0xffffffffffffffff) << (VA_BITS - 1))
 #define MODULES_END		(PAGE_OFFSET)
 #define MODULES_VADDR		(MODULES_END - SZ_64M)
 #define EARLYCON_IOBASE		(MODULES_VADDR - SZ_4M)
-#define VA_BITS			(39)
 #define TASK_SIZE_64		(UL(1) << VA_BITS)
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/arm64/include/asm/pgtable-2level-hwdef.h b/arch/arm64/include/asm/pgtable-2level-hwdef.h
index 0a8ed3f..2593b49 100644
--- a/arch/arm64/include/asm/pgtable-2level-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-2level-hwdef.h
@@ -21,10 +21,10 @@
  * 8192 entries of 8 bytes each, occupying a 64KB page. Levels 0 and 1 are not
  * used. The 2nd level table (PGD for Linux) can cover a range of 4TB, each
  * entry representing 512MB. The user and kernel address spaces are limited to
- * 512GB and therefore we only use 1024 entries in the PGD.
+ * 4TB in the 64KB page configuration.
  */
 #define PTRS_PER_PTE		8192
-#define PTRS_PER_PGD		1024
+#define PTRS_PER_PGD		8192
 
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index f0bebc5..17bd3af 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -33,7 +33,7 @@
 /*
  * VMALLOC and SPARSEMEM_VMEMMAP ranges.
  */
-#define VMALLOC_START		UL(0xffffff8000000000)
+#define VMALLOC_START		(UL(0xffffffffffffffff) << VA_BITS)
 #define VMALLOC_END		(PAGE_OFFSET - UL(0x400000000) - SZ_64K)
 
 #define vmemmap			((struct page *)(VMALLOC_END + SZ_64K))
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index ab239b2..45b20cd 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -107,6 +107,11 @@
 	regs->pstate = COMPAT_PSR_MODE_USR;
 	if (pc & 1)
 		regs->pstate |= COMPAT_PSR_T_BIT;
+
+#ifdef __AARCH64EB__
+	regs->pstate |= COMPAT_PSR_E_BIT;
+#endif
+
 	regs->compat_sp = sp;
 }
 #endif
diff --git a/arch/arm64/include/asm/psci.h b/arch/arm64/include/asm/psci.h
index 0604237..e5312ea 100644
--- a/arch/arm64/include/asm/psci.h
+++ b/arch/arm64/include/asm/psci.h
@@ -14,25 +14,6 @@
 #ifndef __ASM_PSCI_H
 #define __ASM_PSCI_H
 
-#define PSCI_POWER_STATE_TYPE_STANDBY		0
-#define PSCI_POWER_STATE_TYPE_POWER_DOWN	1
-
-struct psci_power_state {
-	u16	id;
-	u8	type;
-	u8	affinity_level;
-};
-
-struct psci_operations {
-	int (*cpu_suspend)(struct psci_power_state state,
-			   unsigned long entry_point);
-	int (*cpu_off)(struct psci_power_state state);
-	int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
-	int (*migrate)(unsigned long cpuid);
-};
-
-extern struct psci_operations psci_ops;
-
 int psci_init(void);
 
 #endif /* __ASM_PSCI_H */
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0dacbbf..0e7fa49 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -42,6 +42,7 @@
 #define COMPAT_PSR_MODE_UND	0x0000001b
 #define COMPAT_PSR_MODE_SYS	0x0000001f
 #define COMPAT_PSR_T_BIT	0x00000020
+#define COMPAT_PSR_E_BIT	0x00000200
 #define COMPAT_PSR_F_BIT	0x00000040
 #define COMPAT_PSR_I_BIT	0x00000080
 #define COMPAT_PSR_A_BIT	0x00000100
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 4b8023c..a498f2c 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -60,21 +60,14 @@
 	void *stack;
 };
 extern struct secondary_data secondary_data;
-extern void secondary_holding_pen(void);
-extern volatile unsigned long secondary_holding_pen_release;
+extern void secondary_entry(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
-struct device_node;
+extern int __cpu_disable(void);
 
-struct smp_enable_ops {
-	const char	*name;
-	int		(*init_cpu)(struct device_node *, int);
-	int		(*prepare_cpu)(int);
-};
-
-extern const struct smp_enable_ops smp_spin_table_ops;
-extern const struct smp_enable_ops smp_psci_ops;
+extern void __cpu_die(unsigned int cpu);
+extern void cpu_die(void);
 
 #endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
index 0defa07..3d5cf06 100644
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@@ -22,17 +22,10 @@
 /*
  * Spinlock implementation.
  *
- * The old value is read exclusively and the new one, if unlocked, is written
- * exclusively. In case of failure, the loop is restarted.
- *
  * The memory barriers are implicit with the load-acquire and store-release
  * instructions.
- *
- * Unlocked value: 0
- * Locked value: 1
  */
 
-#define arch_spin_is_locked(x)		((x)->lock != 0)
 #define arch_spin_unlock_wait(lock) \
 	do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
 
@@ -41,32 +34,51 @@
 static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	unsigned int tmp;
+	arch_spinlock_t lockval, newval;
 
 	asm volatile(
-	"	sevl\n"
-	"1:	wfe\n"
-	"2:	ldaxr	%w0, %1\n"
-	"	cbnz	%w0, 1b\n"
-	"	stxr	%w0, %w2, %1\n"
-	"	cbnz	%w0, 2b\n"
-	: "=&r" (tmp), "+Q" (lock->lock)
-	: "r" (1)
-	: "cc", "memory");
+	/* Atomically increment the next ticket. */
+"	prfm	pstl1strm, %3\n"
+"1:	ldaxr	%w0, %3\n"
+"	add	%w1, %w0, %w5\n"
+"	stxr	%w2, %w1, %3\n"
+"	cbnz	%w2, 1b\n"
+	/* Did we get the lock? */
+"	eor	%w1, %w0, %w0, ror #16\n"
+"	cbz	%w1, 3f\n"
+	/*
+	 * No: spin on the owner. Send a local event to avoid missing an
+	 * unlock before the exclusive load.
+	 */
+"	sevl\n"
+"2:	wfe\n"
+"	ldaxrh	%w2, %4\n"
+"	eor	%w1, %w2, %w0, lsr #16\n"
+"	cbnz	%w1, 2b\n"
+	/* We got the lock. Critical section starts here. */
+"3:"
+	: "=&r" (lockval), "=&r" (newval), "=&r" (tmp), "+Q" (*lock)
+	: "Q" (lock->owner), "I" (1 << TICKET_SHIFT)
+	: "memory");
 }
 
 static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	unsigned int tmp;
+	arch_spinlock_t lockval;
 
 	asm volatile(
-	"2:	ldaxr	%w0, %1\n"
-	"	cbnz	%w0, 1f\n"
-	"	stxr	%w0, %w2, %1\n"
-	"	cbnz	%w0, 2b\n"
-	"1:\n"
-	: "=&r" (tmp), "+Q" (lock->lock)
-	: "r" (1)
-	: "cc", "memory");
+"	prfm	pstl1strm, %2\n"
+"1:	ldaxr	%w0, %2\n"
+"	eor	%w1, %w0, %w0, ror #16\n"
+"	cbnz	%w1, 2f\n"
+"	add	%w0, %w0, %3\n"
+"	stxr	%w1, %w0, %2\n"
+"	cbnz	%w1, 1b\n"
+"2:"
+	: "=&r" (lockval), "=&r" (tmp), "+Q" (*lock)
+	: "I" (1 << TICKET_SHIFT)
+	: "memory");
 
 	return !tmp;
 }
@@ -74,10 +86,29 @@
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	asm volatile(
-	"	stlr	%w1, %0\n"
-	: "=Q" (lock->lock) : "r" (0) : "memory");
+"	stlrh	%w1, %0\n"
+	: "=Q" (lock->owner)
+	: "r" (lock->owner + 1)
+	: "memory");
 }
 
+static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
+{
+	return lock.owner == lock.next;
+}
+
+static inline int arch_spin_is_locked(arch_spinlock_t *lock)
+{
+	return !arch_spin_value_unlocked(ACCESS_ONCE(*lock));
+}
+
+static inline int arch_spin_is_contended(arch_spinlock_t *lock)
+{
+	arch_spinlock_t lockval = ACCESS_ONCE(*lock);
+	return (lockval.next - lockval.owner) > 1;
+}
+#define arch_spin_is_contended	arch_spin_is_contended
+
 /*
  * Write lock implementation.
  *
diff --git a/arch/arm64/include/asm/spinlock_types.h b/arch/arm64/include/asm/spinlock_types.h
index 9a49434..b8d3836 100644
--- a/arch/arm64/include/asm/spinlock_types.h
+++ b/arch/arm64/include/asm/spinlock_types.h
@@ -20,14 +20,19 @@
 # error "please don't include this file directly"
 #endif
 
-/* We only require natural alignment for exclusive accesses. */
-#define __lock_aligned
+#define TICKET_SHIFT	16
 
 typedef struct {
-	volatile unsigned int lock;
-} arch_spinlock_t;
+#ifdef __AARCH64EB__
+	u16 next;
+	u16 owner;
+#else
+	u16 owner;
+	u16 next;
+#endif
+} __aligned(4) arch_spinlock_t;
 
-#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 , 0 }
 
 typedef struct {
 	volatile unsigned int lock;
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 89c047f..70ba9d4 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -59,6 +59,9 @@
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
 		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
@@ -82,6 +85,9 @@
 					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		pr_warning("%s called with max args %d, handling only %d\n",
 			   __func__, i + n, SYSCALL_MAX_ARGS);
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 26e310c..130e2be 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -18,7 +18,8 @@
 #ifndef __ASM__VIRT_H
 #define __ASM__VIRT_H
 
-#define BOOT_CPU_MODE_EL2	(0x0e12b007)
+#define BOOT_CPU_MODE_EL1	(0xe11)
+#define BOOT_CPU_MODE_EL2	(0xe12)
 
 #ifndef __ASSEMBLY__
 #include <asm/cacheflush.h>
diff --git a/arch/arm64/include/uapi/asm/byteorder.h b/arch/arm64/include/uapi/asm/byteorder.h
index 2b92046..dc19e95 100644
--- a/arch/arm64/include/uapi/asm/byteorder.h
+++ b/arch/arm64/include/uapi/asm/byteorder.h
@@ -16,6 +16,10 @@
 #ifndef __ASM_BYTEORDER_H
 #define __ASM_BYTEORDER_H
 
+#ifdef __AARCH64EB__
+#include <linux/byteorder/big_endian.h>
+#else
 #include <linux/byteorder/little_endian.h>
+#endif
 
 #endif	/* __ASM_BYTEORDER_H */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 7b4b564..5ba2fd4 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -9,12 +9,12 @@
 arm64-obj-y		:= cputable.o debug-monitors.o entry.o irq.o fpsimd.o	\
 			   entry-fpsimd.o process.o ptrace.o setup.o signal.o	\
 			   sys.o stacktrace.o time.o traps.o io.o vdso.o	\
-			   hyp-stub.o psci.o
+			   hyp-stub.o psci.o cpu_ops.o
 
 arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
 					   sys_compat.o
 arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
-arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o smp_psci.o
+arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o
 arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
 arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o
 arm64-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c
index 41b4f62..e7ee770 100644
--- a/arch/arm64/kernel/arm64ksyms.c
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -39,6 +39,7 @@
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__copy_in_user);
 
 	/* physical memory */
 EXPORT_SYMBOL(memstart_addr);
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
new file mode 100644
index 0000000..d62d12f
--- /dev/null
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -0,0 +1,87 @@
+/*
+ * CPU kernel entry/exit control
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/cpu_ops.h>
+#include <asm/smp_plat.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/string.h>
+
+extern const struct cpu_operations smp_spin_table_ops;
+extern const struct cpu_operations cpu_psci_ops;
+
+const struct cpu_operations *cpu_ops[NR_CPUS];
+
+static const struct cpu_operations *supported_cpu_ops[] __initconst = {
+#ifdef CONFIG_SMP
+	&smp_spin_table_ops,
+	&cpu_psci_ops,
+#endif
+	NULL,
+};
+
+static const struct cpu_operations * __init cpu_get_ops(const char *name)
+{
+	const struct cpu_operations **ops = supported_cpu_ops;
+
+	while (*ops) {
+		if (!strcmp(name, (*ops)->name))
+			return *ops;
+
+		ops++;
+	}
+
+	return NULL;
+}
+
+/*
+ * Read a cpu's enable method from the device tree and record it in cpu_ops.
+ */
+int __init cpu_read_ops(struct device_node *dn, int cpu)
+{
+	const char *enable_method = of_get_property(dn, "enable-method", NULL);
+	if (!enable_method) {
+		/*
+		 * The boot CPU may not have an enable method (e.g. when
+		 * spin-table is used for secondaries). Don't warn spuriously.
+		 */
+		if (cpu != 0)
+			pr_err("%s: missing enable-method property\n",
+				dn->full_name);
+		return -ENOENT;
+	}
+
+	cpu_ops[cpu] = cpu_get_ops(enable_method);
+	if (!cpu_ops[cpu]) {
+		pr_warn("%s: unsupported enable-method property: %s\n",
+			dn->full_name, enable_method);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+void __init cpu_read_bootcpu_ops(void)
+{
+	struct device_node *dn = of_get_cpu_node(0, NULL);
+	if (!dn) {
+		pr_err("Failed to find device node for boot cpu\n");
+		return;
+	}
+	cpu_read_ops(dn, 0);
+}
diff --git a/arch/arm64/kernel/cputable.c b/arch/arm64/kernel/cputable.c
index 63cfc4a..fd3993c 100644
--- a/arch/arm64/kernel/cputable.c
+++ b/arch/arm64/kernel/cputable.c
@@ -22,7 +22,7 @@
 
 extern unsigned long __cpu_setup(void);
 
-struct cpu_info __initdata cpu_table[] = {
+struct cpu_info cpu_table[] = {
 	{
 		.cpu_id_val	= 0x000f0000,
 		.cpu_id_mask	= 0x000f0000,
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 3881fd1..e116614 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -311,14 +311,14 @@
 #endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
-	ldr	x24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	x0, x24, #1			// increment it
-	str	x0, [tsk, #TI_PREEMPT]
+	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
+	add	w0, w24, #1			// increment it
+	str	w0, [tsk, #TI_PREEMPT]
 #endif
 	irq_handler
 #ifdef CONFIG_PREEMPT
-	str	x24, [tsk, #TI_PREEMPT]		// restore preempt count
-	cbnz	x24, 1f				// preempt count != 0
+	str	w24, [tsk, #TI_PREEMPT]		// restore preempt count
+	cbnz	w24, 1f				// preempt count != 0
 	ldr	x0, [tsk, #TI_FLAGS]		// get flags
 	tbz	x0, #TIF_NEED_RESCHED, 1f	// needs rescheduling?
 	bl	el1_preempt
@@ -509,15 +509,15 @@
 #endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
-	ldr	x24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	x23, x24, #1			// increment it
-	str	x23, [tsk, #TI_PREEMPT]
+	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
+	add	w23, w24, #1			// increment it
+	str	w23, [tsk, #TI_PREEMPT]
 #endif
 	irq_handler
 #ifdef CONFIG_PREEMPT
-	ldr	x0, [tsk, #TI_PREEMPT]
-	str	x24, [tsk, #TI_PREEMPT]
-	cmp	x0, x23
+	ldr	w0, [tsk, #TI_PREEMPT]
+	str	w24, [tsk, #TI_PREEMPT]
+	cmp	w0, w23
 	b.eq	1f
 	mov	x1, #0
 	str	x1, [x1]			// BUG
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 7090c12..7009387 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -123,8 +123,9 @@
 
 ENTRY(stext)
 	mov	x21, x0				// x21=FDT
+	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
 	bl	__calc_phys_offset		// x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
-	bl	el2_setup			// Drop to EL1
+	bl	set_cpu_boot_mode_flag
 	mrs	x22, midr_el1			// x22=cpuid
 	mov	x0, x22
 	bl	lookup_processor_type
@@ -150,21 +151,30 @@
 /*
  * If we're fortunate enough to boot at EL2, ensure that the world is
  * sane before dropping to EL1.
+ *
+ * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x20 if
+ * booted in EL1 or EL2 respectively.
  */
 ENTRY(el2_setup)
 	mrs	x0, CurrentEL
 	cmp	x0, #PSR_MODE_EL2t
 	ccmp	x0, #PSR_MODE_EL2h, #0x4, ne
-	ldr	x0, =__boot_cpu_mode		// Compute __boot_cpu_mode
-	add	x0, x0, x28
-	b.eq	1f
-	str	wzr, [x0]			// Remember we don't have EL2...
+	b.ne	1f
+	mrs	x0, sctlr_el2
+CPU_BE(	orr	x0, x0, #(1 << 25)	)	// Set the EE bit for EL2
+CPU_LE(	bic	x0, x0, #(1 << 25)	)	// Clear the EE bit for EL2
+	msr	sctlr_el2, x0
+	b	2f
+1:	mrs	x0, sctlr_el1
+CPU_BE(	orr	x0, x0, #(3 << 24)	)	// Set the EE and E0E bits for EL1
+CPU_LE(	bic	x0, x0, #(3 << 24)	)	// Clear the EE and E0E bits for EL1
+	msr	sctlr_el1, x0
+	mov	w20, #BOOT_CPU_MODE_EL1		// This cpu booted in EL1
+	isb
 	ret
 
 	/* Hyp configuration. */
-1:	ldr	w1, =BOOT_CPU_MODE_EL2
-	str	w1, [x0, #4]			// This CPU has EL2
-	mov	x0, #(1 << 31)			// 64-bit EL1
+2:	mov	x0, #(1 << 31)			// 64-bit EL1
 	msr	hcr_el2, x0
 
 	/* Generic timers. */
@@ -181,7 +191,8 @@
 
 	/* sctlr_el1 */
 	mov	x0, #0x0800			// Set/clear RES{1,0} bits
-	movk	x0, #0x30d0, lsl #16
+CPU_BE(	movk	x0, #0x33d0, lsl #16	)	// Set EE and E0E on BE systems
+CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	msr	sctlr_el1, x0
 
 	/* Coprocessor traps. */
@@ -204,10 +215,25 @@
 		      PSR_MODE_EL1h)
 	msr	spsr_el2, x0
 	msr	elr_el2, lr
+	mov	w20, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
 	eret
 ENDPROC(el2_setup)
 
 /*
+ * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
+ * in x20. See arch/arm64/include/asm/virt.h for more info.
+ */
+ENTRY(set_cpu_boot_mode_flag)
+	ldr	x1, =__boot_cpu_mode		// Compute __boot_cpu_mode
+	add	x1, x1, x28
+	cmp	w20, #BOOT_CPU_MODE_EL2
+	b.ne	1f
+	add	x1, x1, #4
+1:	str	w20, [x1]			// This CPU has booted in EL1
+	ret
+ENDPROC(set_cpu_boot_mode_flag)
+
+/*
  * We need to find out the CPU boot mode long after boot, so we need to
  * store it in a writable variable.
  *
@@ -225,7 +251,6 @@
 	.quad	PAGE_OFFSET
 
 #ifdef CONFIG_SMP
-	.pushsection    .smp.pen.text, "ax"
 	.align	3
 1:	.quad	.
 	.quad	secondary_holding_pen_release
@@ -235,8 +260,9 @@
 	 * cores are held until we're ready for them to initialise.
 	 */
 ENTRY(secondary_holding_pen)
-	bl	__calc_phys_offset		// x24=phys offset
-	bl	el2_setup			// Drop to EL1
+	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
+	bl	__calc_phys_offset		// x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
+	bl	set_cpu_boot_mode_flag
 	mrs	x0, mpidr_el1
 	ldr     x1, =MPIDR_HWID_BITMASK
 	and	x0, x0, x1
@@ -250,7 +276,16 @@
 	wfe
 	b	pen
 ENDPROC(secondary_holding_pen)
-	.popsection
+
+	/*
+	 * Secondary entry point that jumps straight into the kernel. Only to
+	 * be used where CPUs are brought online dynamically by the kernel.
+	 */
+ENTRY(secondary_entry)
+	bl	__calc_phys_offset		// x2=phys offset
+	bl	el2_setup			// Drop to EL1
+	b	secondary_startup
+ENDPROC(secondary_entry)
 
 ENTRY(secondary_startup)
 	/*
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index ecb3354..473e5db 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -81,3 +81,64 @@
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
 }
+
+#ifdef CONFIG_HOTPLUG_CPU
+static bool migrate_one_irq(struct irq_desc *desc)
+{
+	struct irq_data *d = irq_desc_get_irq_data(desc);
+	const struct cpumask *affinity = d->affinity;
+	struct irq_chip *c;
+	bool ret = false;
+
+	/*
+	 * If this is a per-CPU interrupt, or the affinity does not
+	 * include this CPU, then we have nothing to do.
+	 */
+	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
+		return false;
+
+	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+		affinity = cpu_online_mask;
+		ret = true;
+	}
+
+	c = irq_data_get_irq_chip(d);
+	if (!c->irq_set_affinity)
+		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
+
+	return ret;
+}
+
+/*
+ * The current CPU has been marked offline.  Migrate IRQs off this CPU.
+ * If the affinity settings do not allow other CPUs, force them onto any
+ * available CPU.
+ *
+ * Note: we must iterate over all IRQs, whether they have an attached
+ * action structure or not, as we need to get chained interrupts too.
+ */
+void migrate_irqs(void)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for_each_irq_desc(i, desc) {
+		bool affinity_broken;
+
+		raw_spin_lock(&desc->lock);
+		affinity_broken = migrate_one_irq(desc);
+		raw_spin_unlock(&desc->lock);
+
+		if (affinity_broken)
+			pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
+					    i, smp_processor_id());
+	}
+
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
index 8b69ecb..63c48ff 100644
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@@ -27,6 +27,9 @@
  *
  * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
  */
+
+#include <asm/unistd32.h>
+
 	.align	5
 	.globl	__kuser_helper_start
 __kuser_helper_start:
@@ -35,33 +38,30 @@
 	.inst	0xe92d00f0		//	push		{r4, r5, r6, r7}
 	.inst	0xe1c040d0		//	ldrd		r4, r5, [r0]
 	.inst	0xe1c160d0		//	ldrd		r6, r7, [r1]
-	.inst	0xf57ff05f		//	dmb		sy
-	.inst	0xe1b20f9f		// 1:	ldrexd		r0, r1, [r2]
+	.inst	0xe1b20e9f		// 1:	ldaexd		r0, r1, [r2]
 	.inst	0xe0303004		//	eors		r3, r0, r4
 	.inst	0x00313005		//	eoreqs		r3, r1, r5
-	.inst	0x01a23f96		//	strexdeq	r3, r6, [r2]
+	.inst	0x01a23e96		//	stlexdeq	r3, r6, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffff9		//	beq		1b
-	.inst	0xf57ff05f		//	dmb		sy
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
 	.inst	0xe8bd00f0		//	pop		{r4, r5, r6, r7}
 	.inst	0xe12fff1e		//	bx		lr
 
 	.align	5
 __kuser_memory_barrier:			// 0xffff0fa0
-	.inst	0xf57ff05f		//	dmb		sy
+	.inst	0xf57ff05b		//	dmb		ish
 	.inst	0xe12fff1e		//	bx		lr
 
 	.align	5
 __kuser_cmpxchg:			// 0xffff0fc0
-	.inst	0xf57ff05f		//	dmb		sy
-	.inst	0xe1923f9f		// 1:	ldrex		r3, [r2]
+	.inst	0xe1923e9f		// 1:	ldaex		r3, [r2]
 	.inst	0xe0533000		//	subs		r3, r3, r0
-	.inst	0x01823f91		//	strexeq	r3, r1, [r2]
+	.inst	0x01823e91		//	stlexeq		r3, r1, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffffa		//	beq		1b
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
-	.inst	0xeaffffef		//	b		<__kuser_memory_barrier>
+	.inst	0xe12fff1e		//	bx		lr
 
 	.align	5
 __kuser_get_tls:			// 0xffff0fe0
@@ -75,3 +75,42 @@
 	.word	((__kuser_helper_end - __kuser_helper_start) >> 5)
 	.globl	__kuser_helper_end
 __kuser_helper_end:
+
+/*
+ * AArch32 sigreturn code
+ *
+ * For ARM syscalls, the syscall number has to be loaded into r7.
+ * We do not support an OABI userspace.
+ *
+ * For Thumb syscalls, we also pass the syscall number via r7. We therefore
+ * need two 16-bit instructions.
+ */
+	.globl __aarch32_sigret_code_start
+__aarch32_sigret_code_start:
+
+	/*
+	 * ARM Code
+	 */
+	.byte	__NR_compat_sigreturn, 0x70, 0xa0, 0xe3	// mov	r7, #__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0x00, 0x00, 0xef	// svc	#__NR_compat_sigreturn
+
+	/*
+	 * Thumb code
+	 */
+	.byte	__NR_compat_sigreturn, 0x27			// svc	#__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0xdf			// mov	r7, #__NR_compat_sigreturn
+
+	/*
+	 * ARM code
+	 */
+	.byte	__NR_compat_rt_sigreturn, 0x70, 0xa0, 0xe3	// mov	r7, #__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0x00, 0x00, 0xef	// svc	#__NR_compat_rt_sigreturn
+
+	/*
+	 * Thumb code
+	 */
+	.byte	__NR_compat_rt_sigreturn, 0x27			// svc	#__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0xdf			// mov	r7, #__NR_compat_rt_sigreturn
+
+        .globl __aarch32_sigret_code_end
+__aarch32_sigret_code_end:
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index ca0e3d5..2c28a6c 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -111,6 +111,9 @@
 	u32 immlo, immhi, lomask, himask, mask;
 	int shift;
 
+	/* The instruction stream is always little endian. */
+	insn = le32_to_cpu(insn);
+
 	switch (type) {
 	case INSN_IMM_MOVNZ:
 		/*
@@ -179,7 +182,7 @@
 	insn &= ~(mask << shift);
 	insn |= (imm & mask) << shift;
 
-	return insn;
+	return cpu_to_le32(insn);
 }
 
 static int reloc_insn_movw(enum aarch64_reloc_op op, void *place, u64 val,
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index cea1594..5d14470 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -784,8 +784,8 @@
 /*
  * PMXEVTYPER: Event selection reg
  */
-#define	ARMV8_EVTYPE_MASK	0xc80000ff	/* Mask for writable bits */
-#define	ARMV8_EVTYPE_EVENT	0xff		/* Mask for EVENT bits */
+#define	ARMV8_EVTYPE_MASK	0xc80003ff	/* Mask for writable bits */
+#define	ARMV8_EVTYPE_EVENT	0x3ff		/* Mask for EVENT bits */
 
 /*
  * Event filters for PMUv3
@@ -1175,7 +1175,8 @@
 static int armv8_pmuv3_map_event(struct perf_event *event)
 {
 	return map_cpu_event(event, &armv8_pmuv3_perf_map,
-				&armv8_pmuv3_perf_cache_map, 0xFF);
+				&armv8_pmuv3_perf_cache_map,
+				ARMV8_EVTYPE_EVENT);
 }
 
 static struct arm_pmu armv8pmu = {
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 7ae8a1f..de17c89 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -102,6 +102,13 @@
 	local_irq_enable();
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+void arch_cpu_idle_dead(void)
+{
+       cpu_die();
+}
+#endif
+
 void machine_shutdown(void)
 {
 #ifdef CONFIG_SMP
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 14f73c4..4f97db3 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -17,12 +17,32 @@
 
 #include <linux/init.h>
 #include <linux/of.h>
+#include <linux/smp.h>
 
 #include <asm/compiler.h>
+#include <asm/cpu_ops.h>
 #include <asm/errno.h>
 #include <asm/psci.h>
+#include <asm/smp_plat.h>
 
-struct psci_operations psci_ops;
+#define PSCI_POWER_STATE_TYPE_STANDBY		0
+#define PSCI_POWER_STATE_TYPE_POWER_DOWN	1
+
+struct psci_power_state {
+	u16	id;
+	u8	type;
+	u8	affinity_level;
+};
+
+struct psci_operations {
+	int (*cpu_suspend)(struct psci_power_state state,
+			   unsigned long entry_point);
+	int (*cpu_off)(struct psci_power_state state);
+	int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
+	int (*migrate)(unsigned long cpuid);
+};
+
+static struct psci_operations psci_ops;
 
 static int (*invoke_psci_fn)(u64, u64, u64, u64);
 
@@ -209,3 +229,68 @@
 	of_node_put(np);
 	return err;
 }
+
+#ifdef CONFIG_SMP
+
+static int __init cpu_psci_cpu_init(struct device_node *dn, unsigned int cpu)
+{
+	return 0;
+}
+
+static int __init cpu_psci_cpu_prepare(unsigned int cpu)
+{
+	if (!psci_ops.cpu_on) {
+		pr_err("no cpu_on method, not booting CPU%d\n", cpu);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int cpu_psci_cpu_boot(unsigned int cpu)
+{
+	int err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_entry));
+	if (err)
+		pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err);
+
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int cpu_psci_cpu_disable(unsigned int cpu)
+{
+	/* Fail early if we don't have CPU_OFF support */
+	if (!psci_ops.cpu_off)
+		return -EOPNOTSUPP;
+	return 0;
+}
+
+static void cpu_psci_cpu_die(unsigned int cpu)
+{
+	int ret;
+	/*
+	 * There are no known implementations of PSCI actually using the
+	 * power state field, pass a sensible default for now.
+	 */
+	struct psci_power_state state = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+	};
+
+	ret = psci_ops.cpu_off(state);
+
+	pr_crit("psci: unable to power off CPU%u (%d)\n", cpu, ret);
+}
+#endif
+
+const struct cpu_operations cpu_psci_ops = {
+	.name		= "psci",
+	.cpu_init	= cpu_psci_cpu_init,
+	.cpu_prepare	= cpu_psci_cpu_prepare,
+	.cpu_boot	= cpu_psci_cpu_boot,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= cpu_psci_cpu_disable,
+	.cpu_die	= cpu_psci_cpu_die,
+#endif
+};
+
+#endif
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 055cfb8..9cf30f4 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -45,6 +45,7 @@
 #include <asm/cputype.h>
 #include <asm/elf.h>
 #include <asm/cputable.h>
+#include <asm/cpu_ops.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp_plat.h>
@@ -97,6 +98,11 @@
 	printk("%s", buf);
 }
 
+bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
+{
+	return phys_id == cpu_logical_map(cpu);
+}
+
 static void __init setup_processor(void)
 {
 	struct cpu_info *cpu_info;
@@ -118,7 +124,7 @@
 	printk("CPU: %s [%08x] revision %d\n",
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15);
 
-	sprintf(init_utsname()->machine, "aarch64");
+	sprintf(init_utsname()->machine, ELF_PLATFORM);
 	elf_hwcap = 0;
 }
 
@@ -264,6 +270,7 @@
 	psci_init();
 
 	cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
+	cpu_read_bootcpu_ops();
 #ifdef CONFIG_SMP
 	smp_init_cpus();
 #endif
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index e393174..e51bbe7 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -100,34 +100,6 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-/*
- * For ARM syscalls, the syscall number has to be loaded into r7.
- * We do not support an OABI userspace.
- */
-#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | __NR_compat_sigreturn)
-#define SVC_SYS_SIGRETURN	(0xef000000 | __NR_compat_sigreturn)
-#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | __NR_compat_rt_sigreturn)
-#define SVC_SYS_RT_SIGRETURN	(0xef000000 | __NR_compat_rt_sigreturn)
-
-/*
- * For Thumb syscalls, we also pass the syscall number via r7. We therefore
- * need two 16-bit instructions.
- */
-#define SVC_THUMB_SIGRETURN	(((0xdf00 | __NR_compat_sigreturn) << 16) | \
-				   0x2700 | __NR_compat_sigreturn)
-#define SVC_THUMB_RT_SIGRETURN	(((0xdf00 | __NR_compat_rt_sigreturn) << 16) | \
-				   0x2700 | __NR_compat_rt_sigreturn)
-
-const compat_ulong_t aarch32_sigret_code[6] = {
-	/*
-	 * AArch32 sigreturn code.
-	 * We don't construct an OABI SWI - instead we just set the imm24 field
-	 * to the EABI syscall number so that we create a sane disassembly.
-	 */
-	MOV_R7_NR_SIGRETURN,    SVC_SYS_SIGRETURN,    SVC_THUMB_SIGRETURN,
-	MOV_R7_NR_RT_SIGRETURN, SVC_SYS_RT_SIGRETURN, SVC_THUMB_RT_SIGRETURN,
-};
-
 static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
 {
 	compat_sigset_t	cset;
@@ -474,12 +446,13 @@
 	/* Check if the handler is written for ARM or Thumb */
 	thumb = handler & 1;
 
-	if (thumb) {
+	if (thumb)
 		spsr |= COMPAT_PSR_T_BIT;
-		spsr &= ~COMPAT_PSR_IT_MASK;
-	} else {
+	else
 		spsr &= ~COMPAT_PSR_T_BIT;
-	}
+
+	/* The IT state must be cleared for both ARM and Thumb-2 */
+	spsr &= ~COMPAT_PSR_IT_MASK;
 
 	if (ka->sa.sa_flags & SA_RESTORER) {
 		retcode = ptr_to_compat(ka->sa.sa_restorer);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 78db90d..a5aeefa 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -39,6 +39,7 @@
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
+#include <asm/cpu_ops.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -54,7 +55,6 @@
  * where to place its SVC stack
  */
 struct secondary_data secondary_data;
-volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
 
 enum ipi_msg_type {
 	IPI_RESCHEDULE,
@@ -63,61 +63,16 @@
 	IPI_CPU_STOP,
 };
 
-static DEFINE_RAW_SPINLOCK(boot_lock);
-
-/*
- * Write secondary_holding_pen_release in a way that is guaranteed to be
- * visible to all observers, irrespective of whether they're taking part
- * in coherency or not.  This is necessary for the hotplug code to work
- * reliably.
- */
-static void write_pen_release(u64 val)
-{
-	void *start = (void *)&secondary_holding_pen_release;
-	unsigned long size = sizeof(secondary_holding_pen_release);
-
-	secondary_holding_pen_release = val;
-	__flush_dcache_area(start, size);
-}
-
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
  */
 static int boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	unsigned long timeout;
+	if (cpu_ops[cpu]->cpu_boot)
+		return cpu_ops[cpu]->cpu_boot(cpu);
 
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	raw_spin_lock(&boot_lock);
-
-	/*
-	 * Update the pen release flag.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	/*
-	 * Send an event, causing the secondaries to read pen_release.
-	 */
-	sev();
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		if (secondary_holding_pen_release == INVALID_HWID)
-			break;
-		udelay(10);
-	}
-
-	/*
-	 * Now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	raw_spin_unlock(&boot_lock);
-
-	return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0;
+	return -EOPNOTSUPP;
 }
 
 static DECLARE_COMPLETION(cpu_running);
@@ -187,17 +142,13 @@
 	preempt_disable();
 	trace_hardirqs_off();
 
-	/*
-	 * Let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(INVALID_HWID);
+	if (cpu_ops[cpu]->cpu_postboot)
+		cpu_ops[cpu]->cpu_postboot();
 
 	/*
-	 * Synchronise with the boot thread.
+	 * Enable GIC and timers.
 	 */
-	raw_spin_lock(&boot_lock);
-	raw_spin_unlock(&boot_lock);
+	notify_cpu_starting(cpu);
 
 	/*
 	 * OK, now it's safe to let the boot CPU continue.  Wait for
@@ -207,11 +158,6 @@
 	set_cpu_online(cpu, true);
 	complete(&cpu_running);
 
-	/*
-	 * Enable GIC and timers.
-	 */
-	notify_cpu_starting(cpu);
-
 	local_irq_enable();
 	local_fiq_enable();
 
@@ -221,6 +167,102 @@
 	cpu_startup_entry(CPUHP_ONLINE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static int op_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * If we don't have a cpu_die method, abort before we reach the point
+	 * of no return. CPU0 may not have an cpu_ops, so test for it.
+	 */
+	if (!cpu_ops[cpu] || !cpu_ops[cpu]->cpu_die)
+		return -EOPNOTSUPP;
+
+	/*
+	 * We may need to abort a hot unplug for some other mechanism-specific
+	 * reason.
+	 */
+	if (cpu_ops[cpu]->cpu_disable)
+		return cpu_ops[cpu]->cpu_disable(cpu);
+
+	return 0;
+}
+
+/*
+ * __cpu_disable runs on the processor to be shutdown.
+ */
+int __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+	int ret;
+
+	ret = op_cpu_disable(cpu);
+	if (ret)
+		return ret;
+
+	/*
+	 * Take this CPU offline.  Once we clear this, we can't return,
+	 * and we must not schedule until we're ready to give up the cpu.
+	 */
+	set_cpu_online(cpu, false);
+
+	/*
+	 * OK - migrate IRQs away from this CPU
+	 */
+	migrate_irqs();
+
+	/*
+	 * Remove this CPU from the vm mask set of all processes.
+	 */
+	clear_tasks_mm_cpumask(cpu);
+
+	return 0;
+}
+
+static DECLARE_COMPLETION(cpu_died);
+
+/*
+ * called on the thread which is asking for a CPU to be shutdown -
+ * waits until shutdown has completed, or it is timed out.
+ */
+void __cpu_die(unsigned int cpu)
+{
+	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
+		pr_crit("CPU%u: cpu didn't die\n", cpu);
+		return;
+	}
+	pr_notice("CPU%u: shutdown\n", cpu);
+}
+
+/*
+ * Called from the idle thread for the CPU which has been shutdown.
+ *
+ * Note that we disable IRQs here, but do not re-enable them
+ * before returning to the caller. This is also the behaviour
+ * of the other hotplug-cpu capable cores, so presumably coming
+ * out of idle fixes this.
+ */
+void cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	idle_task_exit();
+
+	local_irq_disable();
+
+	/* Tell __cpu_die() that this CPU is now safe to dispose of */
+	complete(&cpu_died);
+
+	/*
+	 * Actually shutdown the CPU. This must never fail. The specific hotplug
+	 * mechanism must perform all required cache maintenance to ensure that
+	 * no dirty lines are lost in the process of shutting down the CPU.
+	 */
+	cpu_ops[cpu]->cpu_die(cpu);
+
+	BUG();
+}
+#endif
+
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
@@ -232,28 +274,6 @@
 
 static void (*smp_cross_call)(const struct cpumask *, unsigned int);
 
-static const struct smp_enable_ops *enable_ops[] __initconst = {
-	&smp_spin_table_ops,
-	&smp_psci_ops,
-	NULL,
-};
-
-static const struct smp_enable_ops *smp_enable_ops[NR_CPUS];
-
-static const struct smp_enable_ops * __init smp_get_enable_ops(const char *name)
-{
-	const struct smp_enable_ops **ops = enable_ops;
-
-	while (*ops) {
-		if (!strcmp(name, (*ops)->name))
-			return *ops;
-
-		ops++;
-	}
-
-	return NULL;
-}
-
 /*
  * Enumerate the possible CPU set from the device tree and build the
  * cpu logical map array containing MPIDR values related to logical
@@ -261,9 +281,8 @@
  */
 void __init smp_init_cpus(void)
 {
-	const char *enable_method;
 	struct device_node *dn = NULL;
-	int i, cpu = 1;
+	unsigned int i, cpu = 1;
 	bool bootcpu_valid = false;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
@@ -332,25 +351,10 @@
 		if (cpu >= NR_CPUS)
 			goto next;
 
-		/*
-		 * We currently support only the "spin-table" enable-method.
-		 */
-		enable_method = of_get_property(dn, "enable-method", NULL);
-		if (!enable_method) {
-			pr_err("%s: missing enable-method property\n",
-				dn->full_name);
+		if (cpu_read_ops(dn, cpu) != 0)
 			goto next;
-		}
 
-		smp_enable_ops[cpu] = smp_get_enable_ops(enable_method);
-
-		if (!smp_enable_ops[cpu]) {
-			pr_err("%s: invalid enable-method property: %s\n",
-			       dn->full_name, enable_method);
-			goto next;
-		}
-
-		if (smp_enable_ops[cpu]->init_cpu(dn, cpu))
+		if (cpu_ops[cpu]->cpu_init(dn, cpu))
 			goto next;
 
 		pr_debug("cpu logical map 0x%llx\n", hwid);
@@ -380,8 +384,8 @@
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu, err;
-	unsigned int ncores = num_possible_cpus();
+	int err;
+	unsigned int cpu, ncores = num_possible_cpus();
 
 	/*
 	 * are we trying to boot more cores than exist?
@@ -408,10 +412,10 @@
 		if (cpu == smp_processor_id())
 			continue;
 
-		if (!smp_enable_ops[cpu])
+		if (!cpu_ops[cpu])
 			continue;
 
-		err = smp_enable_ops[cpu]->prepare_cpu(cpu);
+		err = cpu_ops[cpu]->cpu_prepare(cpu);
 		if (err)
 			continue;
 
@@ -451,7 +455,7 @@
 	for (i = 0; i < NR_IPI; i++) {
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i + IPI_RESCHEDULE,
 			   prec >= 4 ? " " : "");
-		for_each_present_cpu(cpu)
+		for_each_online_cpu(cpu)
 			seq_printf(p, "%10u ",
 				   __get_irq_stat(cpu, ipi_irqs[i]));
 		seq_printf(p, "      %s\n", ipi_types[i]);
diff --git a/arch/arm64/kernel/smp_psci.c b/arch/arm64/kernel/smp_psci.c
deleted file mode 100644
index 0c53330..0000000
--- a/arch/arm64/kernel/smp_psci.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * PSCI SMP initialisation
- *
- * Copyright (C) 2013 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-
-#include <asm/psci.h>
-#include <asm/smp_plat.h>
-
-static int __init smp_psci_init_cpu(struct device_node *dn, int cpu)
-{
-	return 0;
-}
-
-static int __init smp_psci_prepare_cpu(int cpu)
-{
-	int err;
-
-	if (!psci_ops.cpu_on) {
-		pr_err("psci: no cpu_on method, not booting CPU%d\n", cpu);
-		return -ENODEV;
-	}
-
-	err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_holding_pen));
-	if (err) {
-		pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err);
-		return err;
-	}
-
-	return 0;
-}
-
-const struct smp_enable_ops smp_psci_ops __initconst = {
-	.name		= "psci",
-	.init_cpu	= smp_psci_init_cpu,
-	.prepare_cpu	= smp_psci_prepare_cpu,
-};
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
index 7c35fa6..44c2280 100644
--- a/arch/arm64/kernel/smp_spin_table.c
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -16,15 +16,39 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+extern void secondary_holding_pen(void);
+volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
 
 static phys_addr_t cpu_release_addr[NR_CPUS];
+static DEFINE_RAW_SPINLOCK(boot_lock);
 
-static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu)
+/*
+ * Write secondary_holding_pen_release in a way that is guaranteed to be
+ * visible to all observers, irrespective of whether they're taking part
+ * in coherency or not.  This is necessary for the hotplug code to work
+ * reliably.
+ */
+static void write_pen_release(u64 val)
+{
+	void *start = (void *)&secondary_holding_pen_release;
+	unsigned long size = sizeof(secondary_holding_pen_release);
+
+	secondary_holding_pen_release = val;
+	__flush_dcache_area(start, size);
+}
+
+
+static int smp_spin_table_cpu_init(struct device_node *dn, unsigned int cpu)
 {
 	/*
 	 * Determine the address from which the CPU is polling.
@@ -40,7 +64,7 @@
 	return 0;
 }
 
-static int __init smp_spin_table_prepare_cpu(int cpu)
+static int smp_spin_table_cpu_prepare(unsigned int cpu)
 {
 	void **release_addr;
 
@@ -48,7 +72,16 @@
 		return -ENODEV;
 
 	release_addr = __va(cpu_release_addr[cpu]);
-	release_addr[0] = (void *)__pa(secondary_holding_pen);
+
+	/*
+	 * We write the release address as LE regardless of the native
+	 * endianess of the kernel. Therefore, any boot-loaders that
+	 * read this address need to convert this address to the
+	 * boot-loader's endianess before jumping. This is mandated by
+	 * the boot protocol.
+	 */
+	release_addr[0] = (void *) cpu_to_le64(__pa(secondary_holding_pen));
+
 	__flush_dcache_area(release_addr, sizeof(release_addr[0]));
 
 	/*
@@ -59,8 +92,60 @@
 	return 0;
 }
 
-const struct smp_enable_ops smp_spin_table_ops __initconst = {
+static int smp_spin_table_cpu_boot(unsigned int cpu)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	raw_spin_lock(&boot_lock);
+
+	/*
+	 * Update the pen release flag.
+	 */
+	write_pen_release(cpu_logical_map(cpu));
+
+	/*
+	 * Send an event, causing the secondaries to read pen_release.
+	 */
+	sev();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (secondary_holding_pen_release == INVALID_HWID)
+			break;
+		udelay(10);
+	}
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	raw_spin_unlock(&boot_lock);
+
+	return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0;
+}
+
+void smp_spin_table_cpu_postboot(void)
+{
+	/*
+	 * Let the primary processor know we're out of the pen.
+	 */
+	write_pen_release(INVALID_HWID);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	raw_spin_lock(&boot_lock);
+	raw_spin_unlock(&boot_lock);
+}
+
+const struct cpu_operations smp_spin_table_ops = {
 	.name		= "spin-table",
-	.init_cpu 	= smp_spin_table_init_cpu,
-	.prepare_cpu	= smp_spin_table_prepare_cpu,
+	.cpu_init	= smp_spin_table_cpu_init,
+	.cpu_prepare	= smp_spin_table_cpu_prepare,
+	.cpu_boot	= smp_spin_table_cpu_boot,
+	.cpu_postboot	= smp_spin_table_cpu_postboot,
 };
diff --git a/arch/arm64/kernel/sys32.S b/arch/arm64/kernel/sys32.S
index a1b19ed..423a5b3 100644
--- a/arch/arm64/kernel/sys32.S
+++ b/arch/arm64/kernel/sys32.S
@@ -59,48 +59,48 @@
  * extension.
  */
 compat_sys_pread64_wrapper:
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x3, x4, x5
 	b	sys_pread64
 ENDPROC(compat_sys_pread64_wrapper)
 
 compat_sys_pwrite64_wrapper:
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x3, x4, x5
 	b	sys_pwrite64
 ENDPROC(compat_sys_pwrite64_wrapper)
 
 compat_sys_truncate64_wrapper:
-	orr	x1, x2, x3, lsl #32
+	regs_to_64	x1, x2, x3
 	b	sys_truncate
 ENDPROC(compat_sys_truncate64_wrapper)
 
 compat_sys_ftruncate64_wrapper:
-	orr	x1, x2, x3, lsl #32
+	regs_to_64	x1, x2, x3
 	b	sys_ftruncate
 ENDPROC(compat_sys_ftruncate64_wrapper)
 
 compat_sys_readahead_wrapper:
-	orr	x1, x2, x3, lsl #32
+	regs_to_64	x1, x2, x3
 	mov	w2, w4
 	b	sys_readahead
 ENDPROC(compat_sys_readahead_wrapper)
 
 compat_sys_fadvise64_64_wrapper:
 	mov	w6, w1
-	orr	x1, x2, x3, lsl #32
-	orr	x2, x4, x5, lsl #32
+	regs_to_64	x1, x2, x3
+	regs_to_64	x2, x4, x5
 	mov	w3, w6
 	b	sys_fadvise64_64
 ENDPROC(compat_sys_fadvise64_64_wrapper)
 
 compat_sys_sync_file_range2_wrapper:
-	orr	x2, x2, x3, lsl #32
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x2, x2, x3
+	regs_to_64	x3, x4, x5
 	b	sys_sync_file_range2
 ENDPROC(compat_sys_sync_file_range2_wrapper)
 
 compat_sys_fallocate_wrapper:
-	orr	x2, x2, x3, lsl #32
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x2, x2, x3
+	regs_to_64	x3, x4, x5
 	b	sys_fallocate
 ENDPROC(compat_sys_fallocate_wrapper)
 
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 6a389dc..65d40cf 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -58,7 +58,10 @@
 static int alloc_vectors_page(void)
 {
 	extern char __kuser_helper_start[], __kuser_helper_end[];
+	extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[];
+
 	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+	int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start;
 	unsigned long vpage;
 
 	vpage = get_zeroed_page(GFP_ATOMIC);
@@ -72,7 +75,7 @@
 
 	/* sigreturn code */
 	memcpy((void *)vpage + AARCH32_KERN_SIGRET_CODE_OFFSET,
-		aarch32_sigret_code, sizeof(aarch32_sigret_code));
+               __aarch32_sigret_code_start, sigret_sz);
 
 	flush_icache_range(vpage, vpage + PAGE_SIZE);
 	vectors_page[0] = virt_to_page(vpage);
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index f8ab9d8..5161ad9 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -54,7 +54,6 @@
 	}
 	.text : {			/* Real text segment		*/
 		_stext = .;		/* Text and read-only data	*/
-			*(.smp.pen.text)
 			__exception_text_start = .;
 			*(.exception.text)
 			__exception_text_end = .;
@@ -97,30 +96,13 @@
 	PERCPU_SECTION(64)
 
 	__init_end = .;
-	. = ALIGN(THREAD_SIZE);
-	__data_loc = .;
 
-	.data : AT(__data_loc) {
-		_data = .;		/* address in memory */
-		_sdata = .;
-
-		/*
-		 * first, the init task union, aligned
-		 * to an 8192 byte boundary.
-		 */
-		INIT_TASK_DATA(THREAD_SIZE)
-		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(64)
-		READ_MOSTLY_DATA(64)
-
-		/*
-		 * and the usual data section
-		 */
-		DATA_DATA
-		CONSTRUCTORS
-
-		_edata = .;
-	}
+	. = ALIGN(PAGE_SIZE);
+	_data = .;
+	__data_loc = _data - LOAD_OFFSET;
+	_sdata = .;
+	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
+	_edata = .;
 	_edata_loc = __data_loc + SIZEOF(.data);
 
 	BSS_SECTION(0, 0, 0)
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index ba84e67..2b0244d 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -74,7 +74,10 @@
 	msr	mair_el2, x4
 	isb
 
-	mov	x4, #SCTLR_EL2_FLAGS
+	mrs	x4, sctlr_el2
+	and	x4, x4, #SCTLR_EL2_EE	// preserve endianness of EL2
+	ldr	x5, =SCTLR_EL2_FLAGS
+	orr	x4, x4, x5
 	msr	sctlr_el2, x4
 	isb
 
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 1ac0bbb..3b47c36 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -403,6 +403,14 @@
 	ldr	w9, [x2, #GICH_ELRSR0]
 	ldr	w10, [x2, #GICH_ELRSR1]
 	ldr	w11, [x2, #GICH_APR]
+CPU_BE(	rev	w4,  w4  )
+CPU_BE(	rev	w5,  w5  )
+CPU_BE(	rev	w6,  w6  )
+CPU_BE(	rev	w7,  w7  )
+CPU_BE(	rev	w8,  w8  )
+CPU_BE(	rev	w9,  w9  )
+CPU_BE(	rev	w10, w10 )
+CPU_BE(	rev	w11, w11 )
 
 	str	w4, [x3, #VGIC_CPU_HCR]
 	str	w5, [x3, #VGIC_CPU_VMCR]
@@ -421,6 +429,7 @@
 	ldr	w4, [x3, #VGIC_CPU_NR_LR]
 	add	x3, x3, #VGIC_CPU_LR
 1:	ldr	w5, [x2], #4
+CPU_BE(	rev	w5, w5 )
 	str	w5, [x3], #4
 	sub	w4, w4, #1
 	cbnz	w4, 1b
@@ -446,6 +455,9 @@
 	ldr	w4, [x3, #VGIC_CPU_HCR]
 	ldr	w5, [x3, #VGIC_CPU_VMCR]
 	ldr	w6, [x3, #VGIC_CPU_APR]
+CPU_BE(	rev	w4, w4 )
+CPU_BE(	rev	w5, w5 )
+CPU_BE(	rev	w6, w6 )
 
 	str	w4, [x2, #GICH_HCR]
 	str	w5, [x2, #GICH_VMCR]
@@ -456,6 +468,7 @@
 	ldr	w4, [x3, #VGIC_CPU_NR_LR]
 	add	x3, x3, #VGIC_CPU_LR
 1:	ldr	w5, [x3], #4
+CPU_BE(	rev	w5, w5 )
 	str	w5, [x2], #4
 	sub	w4, w4, #1
 	cbnz	w4, 1b
diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c
index 1725cd6..2bb1d58 100644
--- a/arch/arm64/mm/ioremap.c
+++ b/arch/arm64/mm/ioremap.c
@@ -77,8 +77,24 @@
 
 void __iounmap(volatile void __iomem *io_addr)
 {
-	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
+	unsigned long addr = (unsigned long)io_addr & PAGE_MASK;
 
-	vunmap(addr);
+	/*
+	 * We could get an address outside vmalloc range in case
+	 * of ioremap_cache() reusing a RAM mapping.
+	 */
+	if (VMALLOC_START <= addr && addr < VMALLOC_END)
+		vunmap((void *)addr);
 }
 EXPORT_SYMBOL(__iounmap);
+
+void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size)
+{
+	/* For normal memory we already have a cacheable mapping. */
+	if (pfn_valid(__phys_to_pfn(phys_addr)))
+		return (void __iomem *)__phys_to_virt(phys_addr);
+
+	return __ioremap_caller(phys_addr, size, __pgprot(PROT_NORMAL),
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_cache);
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index b1b31bb..421b99f 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -162,9 +162,9 @@
 	 *       CE0      XWHW CZ     ME TEEA S
 	 * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM
 	 * 0011 0... 1101 ..0. ..0. 10.. .... .... < hardware reserved
-	 * .... .100 .... 01.1 11.1 ..01 0001 1101 < software settings
+	 * .... .1.. .... 01.1 11.1 ..01 0001 1101 < software settings
 	 */
 	.type	crval, #object
 crval:
-	.word	0x030802e2			// clear
+	.word	0x000802e2			// clear
 	.word	0x0405d11d			// set
diff --git a/arch/m68k/include/asm/floppy.h b/arch/m68k/include/asm/floppy.h
index 697d503..47365b1 100644
--- a/arch/m68k/include/asm/floppy.h
+++ b/arch/m68k/include/asm/floppy.h
@@ -85,7 +85,7 @@
 {
 	if(MACH_IS_Q40)
 		return request_irq(FLOPPY_IRQ, floppy_hardint,
-				   IRQF_DISABLED, "floppy", floppy_hardint);
+				   0, "floppy", floppy_hardint);
 	else if(MACH_IS_SUN3X)
 		return sun3xflop_request_irq();
 	return -ENXIO;
diff --git a/arch/m68k/include/asm/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h
index 95231e2..a02ea3a 100644
--- a/arch/m68k/include/asm/sun3xflop.h
+++ b/arch/m68k/include/asm/sun3xflop.h
@@ -207,7 +207,7 @@
 	if(!once) {
 		once = 1;
 		error = request_irq(FLOPPY_IRQ, sun3xflop_hardint,
-				    IRQF_DISABLED, "floppy", NULL);
+				    0, "floppy", NULL);
 		return ((error == 0) ? 0 : -1);
 	} else return 0;
 }
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
index 639c731..3fadc4a 100644
--- a/arch/m68k/include/asm/uaccess.h
+++ b/arch/m68k/include/asm/uaccess.h
@@ -3,3 +3,10 @@
 #else
 #include <asm/uaccess_mm.h>
 #endif
+
+#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
+#include <asm-generic/uaccess-unaligned.h>
+#else
+#define __get_user_unaligned(x, ptr)	__get_user((x), (ptr))
+#define __put_user_unaligned(x, ptr)	__put_user((x), (ptr))
+#endif
diff --git a/arch/m68k/platform/68000/timers.c b/arch/m68k/platform/68000/timers.c
index ec30acb..99a9869 100644
--- a/arch/m68k/platform/68000/timers.c
+++ b/arch/m68k/platform/68000/timers.c
@@ -70,7 +70,7 @@
 
 static struct irqaction m68328_timer_irq = {
 	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.flags	 = IRQF_TIMER,
 	.handler = hw_tick,
 };
 
diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c
index 0570741..d493ac4 100644
--- a/arch/m68k/platform/68360/config.c
+++ b/arch/m68k/platform/68360/config.c
@@ -59,7 +59,7 @@
 
 static struct irqaction m68360_timer_irq = {
 	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.flags	 = IRQF_TIMER,
 	.handler = hw_tick,
 };
 
diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
index e8f3b97..493b311 100644
--- a/arch/m68k/platform/coldfire/pit.c
+++ b/arch/m68k/platform/coldfire/pit.c
@@ -118,7 +118,7 @@
 
 static struct irqaction pit_irq = {
 	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.flags	 = IRQF_TIMER,
 	.handler = pit_tick,
 };
 
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
index bb5a25a..831a08c 100644
--- a/arch/m68k/platform/coldfire/sltimers.c
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -51,7 +51,7 @@
 
 static struct irqaction mcfslt_profile_irq = {
 	.name	 = "profile timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.flags	 = IRQF_TIMER,
 	.handler = mcfslt_profile_tick,
 };
 
@@ -93,7 +93,7 @@
 
 static struct irqaction mcfslt_timer_irq = {
 	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.flags	 = IRQF_TIMER,
 	.handler = mcfslt_tick,
 };
 
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
index d06068e..cd496a2 100644
--- a/arch/m68k/platform/coldfire/timers.c
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -83,7 +83,7 @@
 
 static struct irqaction mcftmr_timer_irq = {
 	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.flags	 = IRQF_TIMER,
 	.handler = mcftmr_tick,
 };
 
@@ -171,7 +171,7 @@
 
 static struct irqaction coldfire_profile_irq = {
 	.name	 = "profile timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.flags	 = IRQF_TIMER,
 	.handler = coldfire_profile_tick,
 };
 
diff --git a/arch/metag/kernel/irq.c b/arch/metag/kernel/irq.c
index 2a2c9d5..3b4b7f6 100644
--- a/arch/metag/kernel/irq.c
+++ b/arch/metag/kernel/irq.c
@@ -159,44 +159,30 @@
 
 extern asmlinkage void __do_softirq(void);
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
 	struct thread_info *curctx;
 	union irq_ctx *irqctx;
 	u32 *isp;
 
-	if (in_interrupt())
-		return;
+	curctx = current_thread_info();
+	irqctx = softirq_ctx[smp_processor_id()];
+	irqctx->tinfo.task = curctx->task;
 
-	local_irq_save(flags);
+	/* build the stack frame on the softirq stack */
+	isp = (u32 *) ((char *)irqctx + sizeof(struct thread_info));
 
-	if (local_softirq_pending()) {
-		curctx = current_thread_info();
-		irqctx = softirq_ctx[smp_processor_id()];
-		irqctx->tinfo.task = curctx->task;
-
-		/* build the stack frame on the softirq stack */
-		isp = (u32 *) ((char *)irqctx + sizeof(struct thread_info));
-
-		asm volatile (
-			"MOV   D0.5,%0\n"
-			"SWAP  A0StP,D0.5\n"
-			"CALLR D1RtP,___do_softirq\n"
-			"MOV   A0StP,D0.5\n"
-			:
-			: "r" (isp)
-			: "memory", "cc", "D1Ar1", "D0Ar2", "D1Ar3", "D0Ar4",
-			  "D1Ar5", "D0Ar6", "D0Re0", "D1Re0", "D0.4", "D1RtP",
-			  "D0.5"
-			);
-		/*
-		 * Shouldn't happen, we returned above if in_interrupt():
-		 */
-		WARN_ON_ONCE(softirq_count());
-	}
-
-	local_irq_restore(flags);
+	asm volatile (
+		"MOV   D0.5,%0\n"
+		"SWAP  A0StP,D0.5\n"
+		"CALLR D1RtP,___do_softirq\n"
+		"MOV   A0StP,D0.5\n"
+		:
+		: "r" (isp)
+		: "memory", "cc", "D1Ar1", "D0Ar2", "D1Ar3", "D0Ar4",
+		  "D1Ar5", "D0Ar6", "D0Re0", "D1Re0", "D0.4", "D1RtP",
+		  "D0.5"
+		);
 }
 #endif
 
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index d9d81c2..6e23912 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -20,7 +20,6 @@
 platforms += netlogic
 platforms += pmcs-msp71xx
 platforms += pnx833x
-platforms += powertv
 platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f75ab4a..17cc7ff 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -8,6 +8,7 @@
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
@@ -18,6 +19,7 @@
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_SYSCALL_TRACEPOINTS
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
 	select RTC_LIB if !MACH_LOONGSON
@@ -146,6 +148,7 @@
 	select CSRC_R4K
 	select CEVT_GT641XX
 	select DMA_NONCOHERENT
+	select EARLY_PRINTK_8250 if EARLY_PRINTK
 	select HW_HAS_PCI
 	select I8253
 	select I8259
@@ -412,23 +415,6 @@
 	  of integrated peripherals, interfaces and DSPs in addition to
 	  a variety of MIPS cores.
 
-config POWERTV
-	bool "Cisco PowerTV"
-	select BOOT_ELF32
-	select CEVT_R4K
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select CSRC_POWERTV
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select USB_OHCI_LITTLE_ENDIAN
-	help
-	  This enables support for the Cisco PowerTV Platform.
-
 config RALINK
 	bool "Ralink based machines"
 	select CEVT_R4K
@@ -811,7 +797,6 @@
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmcs-msp71xx/Kconfig"
-source "arch/mips/powertv/Kconfig"
 source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
@@ -890,9 +875,6 @@
 config CSRC_IOASIC
 	bool
 
-config CSRC_POWERTV
-	bool
-
 config CSRC_R4K
 	bool
 
@@ -1489,8 +1471,10 @@
 	bool
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZ4
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_XZ
 
 config SYS_SUPPORTS_ZBOOT_UART16550
 	bool
@@ -1977,6 +1961,7 @@
 config MIPS_CMP
 	bool "MIPS CMP framework support"
 	depends on SYS_SUPPORTS_MIPS_CMP
+	select SMP
 	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 37871f0..b147e70 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -20,6 +20,14 @@
 	  doesn't cooperate with an X server. You should normally say N here,
 	  unless you want to debug such a crash.
 
+config EARLY_PRINTK_8250
+	bool "8250/16550 and compatible serial early printk driver"
+	depends on EARLY_PRINTK
+	default n
+	help
+	  If you say Y here, it will be possible to use a 8250/16550 serial
+	  port as the boot console.
+
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ca8f834..de300b9 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -285,15 +285,19 @@
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
 # convert to ECOFF using elf2ecoff.
 #
+quiet_cmd_32 = OBJCOPY $@
+	cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.32: vmlinux
-	$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
+	$(call cmd,32)
 
 #
 # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
 # ELF files from 32-bit files by conversion.
 #
+quiet_cmd_64 = OBJCOPY $@
+	cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.64: vmlinux
-	$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
+	$(call cmd,64)
 
 all:	$(all-y)
 
@@ -302,10 +306,16 @@
 	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
 		$(bootvars-y) arch/mips/boot/$@
 
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
 # boot/compressed
 $(bootz-y): $(vmlinux-32) FORCE
 	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
 		$(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
+else
+vmlinuz: FORCE
+	@echo '   CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'
+	/bin/false
+endif
 
 
 CLEAN_FILES += vmlinux.32 vmlinux.64
diff --git a/arch/mips/alchemy/devboards/db1235.c b/arch/mips/alchemy/devboards/db1235.c
index c76a90f..bac19dc 100644
--- a/arch/mips/alchemy/devboards/db1235.c
+++ b/arch/mips/alchemy/devboards/db1235.c
@@ -59,7 +59,7 @@
 		ret = -ENODEV;
 	}
 	if (ret)
-		panic("cannot initialize board support\n");
+		panic("cannot initialize board support");
 }
 
 int __init db1235_arch_init(void)
diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c
index c3b04c9..516225d 100644
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -20,7 +20,6 @@
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ar933x_uart_platform.h>
 #include "common.h"
 #include "dev-common.h"
 
@@ -68,15 +67,11 @@
 	},
 };
 
-static struct ar933x_uart_platform_data ar933x_uart_data;
 static struct platform_device ar933x_uart_device = {
 	.name		= "ar933x-uart",
 	.id		= -1,
 	.resource	= ar933x_uart_resources,
 	.num_resources	= ARRAY_SIZE(ar933x_uart_resources),
-	.dev = {
-		.platform_data	= &ar933x_uart_data,
-	},
 };
 
 void __init ath79_register_uart(void)
@@ -93,7 +88,6 @@
 		ath79_uart_data[0].uartclk = uart_clk_rate;
 		platform_device_register(&ath79_uart_device);
 	} else if (soc_is_ar933x()) {
-		ar933x_uart_data.uartclk = uart_clk_rate;
 		platform_device_register(&ar933x_uart_device);
 	} else {
 		BUG();
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index f3bf6d5..c52daf9 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,4 +4,5 @@
 #
 
 obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y				+= board.o
 obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
new file mode 100644
index 0000000..f3f6bfe
--- /dev/null
+++ b/arch/mips/bcm47xx/board.c
@@ -0,0 +1,309 @@
+#include <linux/export.h>
+#include <linux/string.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx_nvram.h>
+
+struct bcm47xx_board_type {
+	const enum bcm47xx_board board;
+	const char *name;
+};
+
+struct bcm47xx_board_type_list1 {
+	struct bcm47xx_board_type board;
+	const char *value1;
+};
+
+struct bcm47xx_board_type_list2 {
+	struct bcm47xx_board_type board;
+	const char *value1;
+	const char *value2;
+};
+
+struct bcm47xx_board_type_list3 {
+	struct bcm47xx_board_type board;
+	const char *value1;
+	const char *value2;
+	const char *value3;
+};
+
+struct bcm47xx_board_store {
+	enum bcm47xx_board board;
+	char name[BCM47XX_BOARD_MAX_NAME];
+};
+
+/* model_name */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
+	{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
+	{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
+	{ {0}, 0},
+};
+
+/* model_no */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
+	{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
+	{ {0}, 0},
+};
+
+/* machine_name */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
+	{{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
+	{ {0}, 0},
+};
+
+/* hardware_version */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
+	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
+	{{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
+	{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
+	{{BCM47XX_BOARD_ASUS_WL500GD, "Asus WL500GD"}, "WL500gd-"},
+	{{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-"},
+	{{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-"},
+	{{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
+	{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
+	{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
+	{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
+	{ {0}, 0},
+};
+
+/* productid */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
+	{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
+	{{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
+	{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
+	{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
+	{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
+	{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
+	{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
+	{{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
+	{{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
+	{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
+	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
+	{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
+	{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
+	{{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
+	{{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
+	{ {0}, 0},
+};
+
+/* ModelId */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
+	{{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
+	{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
+	{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
+	{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
+	{ {0}, 0},
+};
+
+/* melco_id or buf1falo_id */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_melco_id[] __initconst = {
+	{{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332"},
+	{{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd"},
+	{{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093"},
+	{{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182"},
+	{{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189"},
+	{{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129"},
+	{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
+	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
+	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
+	{ {0}, 0},
+};
+
+/* boot_hw_model, boot_hw_ver */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
+	/* like WRT160N v3.0 */
+	{{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"},
+	/* like WRT310N v2.0 */
+	{{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E900V1, "Linksys E900 V1"}, "E900", "1.0"},
+	/* like WRT160N v3.0 */
+	{{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
+	{{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
+	/* like WRT610N v2.0 */
+	{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"},
+	{{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"},
+	{{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
+	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
+	{ {0}, 0},
+};
+
+/* board_id */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
+	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
+	{ {0}, 0},
+};
+
+/* boardtype, boardnum, boardrev */
+static const
+struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
+	{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
+	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
+	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
+	{ {0}, 0},
+};
+
+static const
+struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
+	{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
+};
+
+static struct bcm47xx_board_store bcm47xx_board = {BCM47XX_BOARD_NO, "Unknown Board"};
+
+static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
+{
+	char buf1[30];
+	char buf2[30];
+	char buf3[30];
+	const struct bcm47xx_board_type_list1 *e1;
+	const struct bcm47xx_board_type_list2 *e2;
+	const struct bcm47xx_board_type_list3 *e3;
+
+	if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_model_name; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_model_no; e1->value1; e1++) {
+			if (strstarts(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("machine_name", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_machine_name; e1->value1; e1++) {
+			if (strstarts(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_hardware_version; e1->value1; e1++) {
+			if (strstarts(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_ModelId; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 ||
+	    bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) {
+		/* buffalo hardware, check id for specific hardware matches */
+		for (e1 = bcm47xx_board_list_melco_id; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 &&
+	    bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) {
+		for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
+			if (!strcmp(buf1, e2->value1) &&
+			    !strcmp(buf2, e2->value2))
+				return &e2->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_board_id; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
+	    bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0 &&
+	    bcm47xx_nvram_getenv("boardrev", buf3, sizeof(buf3)) >= 0) {
+		for (e3 = bcm47xx_board_list_board; e3->value1; e3++) {
+			if (!strcmp(buf1, e3->value1) &&
+			    !strcmp(buf2, e3->value2) &&
+			    !strcmp(buf3, e3->value3))
+				return &e3->board;
+		}
+	}
+	return bcm47xx_board_unknown;
+}
+
+void __init bcm47xx_board_detect(void)
+{
+	int err;
+	char buf[10];
+	const struct bcm47xx_board_type *board_detected;
+
+	if (bcm47xx_board.board != BCM47XX_BOARD_NO)
+		return;
+
+	/* check if the nvram is available */
+	err = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
+
+	/* init of nvram failed, probably too early now */
+	if (err == -ENXIO) {
+		return;
+	}
+
+	board_detected = bcm47xx_board_get_nvram();
+	bcm47xx_board.board = board_detected->board;
+	strlcpy(bcm47xx_board.name, board_detected->name,
+		BCM47XX_BOARD_MAX_NAME);
+}
+
+enum bcm47xx_board bcm47xx_board_get(void)
+{
+	return bcm47xx_board.board;
+}
+EXPORT_SYMBOL(bcm47xx_board_get);
+
+const char *bcm47xx_board_get_name(void)
+{
+	return bcm47xx_board.name;
+}
+EXPORT_SYMBOL(bcm47xx_board_get_name);
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index cc40b74..b4c585b 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -190,3 +190,23 @@
 	return -ENOENT;
 }
 EXPORT_SYMBOL(bcm47xx_nvram_getenv);
+
+int bcm47xx_nvram_gpio_pin(const char *name)
+{
+	int i, err;
+	char nvram_var[10];
+	char buf[30];
+
+	for (i = 0; i < 16; i++) {
+		err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
+		if (err <= 0)
+			continue;
+		err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
+		if (err <= 0)
+			continue;
+		if (!strcmp(name, buf))
+			return i;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index 8c155af..5cba318 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -32,12 +32,37 @@
 #include <asm/bootinfo.h>
 #include <asm/fw/cfe/cfe_api.h>
 #include <asm/fw/cfe/cfe_error.h>
+#include <bcm47xx.h>
+#include <bcm47xx_board.h>
 
 static int cfe_cons_handle;
 
+static u16 get_chip_id(void)
+{
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		return bcm47xx_bus.ssb.chip_id;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		return bcm47xx_bus.bcma.bus.chipinfo.id;
+#endif
+	}
+	return 0;
+}
+
 const char *get_system_type(void)
 {
-	return "Broadcom BCM47XX";
+	static char buf[50];
+	u16 chip_id = get_chip_id();
+
+	snprintf(buf, sizeof(buf),
+		 (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
+				      "Broadcom BCM%04X (%s)",
+		 chip_id, bcm47xx_board_get_name());
+
+	return buf;
 }
 
 void prom_putchar(char c)
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index b2246cd..1f30571 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -36,6 +36,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
 
 union bcm47xx_bus bcm47xx_bus;
 EXPORT_SYMBOL(bcm47xx_bus);
@@ -221,6 +222,7 @@
 	_machine_restart = bcm47xx_machine_restart;
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
+	bcm47xx_board_detect();
 }
 
 static int __init bcm47xx_register_bus_complete(void)
diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index 536374d..2c85d92 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -27,10 +27,16 @@
 #include <linux/ssb/ssb.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
+#include <bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
 
 void __init plat_time_init(void)
 {
 	unsigned long hz = 0;
+	u16 chip_id = 0;
+	char buf[10];
+	int len;
+	enum bcm47xx_board board = bcm47xx_board_get();
 
 	/*
 	 * Use deterministic values for initial counter interrupt
@@ -43,15 +49,32 @@
 #ifdef CONFIG_BCM47XX_SSB
 	case BCM47XX_BUS_TYPE_SSB:
 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+		chip_id = bcm47xx_bus.ssb.chip_id;
 		break;
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
 		hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
+		chip_id = bcm47xx_bus.bcma.bus.chipinfo.id;
 		break;
 #endif
 	}
 
+	if (chip_id == 0x5354) {
+		len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf));
+		if (len >= 0 && !strncmp(buf, "200", 4))
+			hz = 100000000;
+	}
+
+	switch (board) {
+	case BCM47XX_BOARD_ASUS_WL520GC:
+	case BCM47XX_BOARD_ASUS_WL520GU:
+		hz = 100000000;
+		break;
+	default:
+		break;
+	}
+
 	if (!hz)
 		hz = 100000000;
 
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 0048c08..ca0c343 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -37,6 +37,10 @@
 vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY)		   += $(obj)/uart-alchemy.o
 endif
 
+ifdef CONFIG_KERNEL_XZ
+vmlinuzobjs-y += $(obj)/../../lib/ashldi3.o
+endif
+
 targets += vmlinux.bin
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
 $(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE
@@ -44,8 +48,10 @@
 
 tool_$(CONFIG_KERNEL_GZIP)    = gzip
 tool_$(CONFIG_KERNEL_BZIP2)   = bzip2
+tool_$(CONFIG_KERNEL_LZ4)     = lz4
 tool_$(CONFIG_KERNEL_LZMA)    = lzma
 tool_$(CONFIG_KERNEL_LZO)     = lzo
+tool_$(CONFIG_KERNEL_XZ)      = xzkern
 
 targets += vmlinux.bin.z
 $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 2c95730..a8c6fd6 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -43,7 +43,8 @@
 /* activate the code for pre-boot environment */
 #define STATIC static
 
-#ifdef CONFIG_KERNEL_GZIP
+#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_XZ) || \
+	defined(CONFIG_KERNEL_LZ4)
 void *memcpy(void *dest, const void *src, size_t n)
 {
 	int i;
@@ -54,6 +55,8 @@
 		d[i] = s[i];
 	return dest;
 }
+#endif
+#ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
 #endif
 
@@ -70,6 +73,10 @@
 #include "../../../../lib/decompress_bunzip2.c"
 #endif
 
+#ifdef CONFIG_KERNEL_LZ4
+#include "../../../../lib/decompress_unlz4.c"
+#endif
+
 #ifdef CONFIG_KERNEL_LZMA
 #include "../../../../lib/decompress_unlzma.c"
 #endif
@@ -78,6 +85,10 @@
 #include "../../../../lib/decompress_unlzo.c"
 #endif
 
+#ifdef CONFIG_KERNEL_XZ
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
 void decompress_kernel(unsigned long boot_heap_start)
 {
 	unsigned long zimage_start, zimage_size;
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
index 8e6b07c..5a33409 100644
--- a/arch/mips/boot/compressed/ld.script
+++ b/arch/mips/boot/compressed/ld.script
@@ -8,6 +8,9 @@
 
 OUTPUT_ARCH(mips)
 ENTRY(start)
+PHDRS {
+	text PT_LOAD FLAGS(7); /* RWX */
+}
 SECTIONS
 {
 	/* Text and read-only data */
@@ -15,7 +18,7 @@
 	.text : {
 		*(.text)
 		*(.rodata)
-	}
+	}: text
 	/* End of text section */
 
 	/* Writable data */
diff --git a/arch/mips/boot/ecoff.h b/arch/mips/boot/ecoff.h
index 83e5c38..7a75ce2 100644
--- a/arch/mips/boot/ecoff.h
+++ b/arch/mips/boot/ecoff.h
@@ -12,7 +12,6 @@
 } FILHDR;
 #define FILHSZ	sizeof(FILHDR)
 
-#define OMAGIC		0407
 #define MIPSEBMAGIC	0x160
 #define MIPSELMAGIC	0x162
 
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index b212ae1..331b837 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -999,7 +999,7 @@
 
 	if (total == 0)
 		panic("Unable to allocate memory from "
-		      "cvmx_bootmem_phy_alloc\n");
+		      "cvmx_bootmem_phy_alloc");
 }
 
 /*
@@ -1081,7 +1081,7 @@
 	/* Copy the default tree from init memory. */
 	initial_boot_params = early_init_dt_alloc_memory_arch(dt_size, 8);
 	if (initial_boot_params == NULL)
-		panic("Could not allocate initial_boot_params\n");
+		panic("Could not allocate initial_boot_params");
 	memcpy(initial_boot_params, fdt, dt_size);
 
 	if (do_prune) {
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index 61a334a..558e949 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -5,5 +5,4 @@
 obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
 
 obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= mtd.o
diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c
deleted file mode 100644
index d1ba701..0000000
--- a/arch/mips/cobalt/console.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * (C) P. Horton 2006
- */
-#include <linux/io.h>
-#include <linux/serial_reg.h>
-
-#include <cobalt.h>
-
-#define UART_BASE	((void __iomem *)CKSEG1ADDR(0x1c800000))
-
-void prom_putchar(char c)
-{
-	if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
-		return;
-
-	while (!(readb(UART_BASE + UART_LSR) & UART_LSR_THRE))
-		;
-
-	writeb(c, UART_BASE + UART_TX);
-}
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index ec3b2c4..9a8c2fe 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -17,6 +17,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/gt64120.h>
 
 #include <cobalt.h>
@@ -112,6 +113,8 @@
 	}
 
 	add_memory_region(0x0, memsz, BOOT_MEM_RAM);
+
+	setup_8250_early_printk_port(CKSEG1ADDR(0x1c800000), 0, 0);
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
deleted file mode 100644
index 7fda0ce..0000000
--- a/arch/mips/configs/powertv_defconfig
+++ /dev/null
@@ -1,136 +0,0 @@
-CONFIG_POWERTV=y
-CONFIG_BOOTLOADER_FAMILY="R2"
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_GZIP is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-# CONFIG_BRIDGE_NETFILTER is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_BRIDGE=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_WLAN is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_VGA_ARB is not set
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_CP210X=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 22afed1..41a2fa1 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -118,7 +118,7 @@
  *	       7	FPU/R4k timer
  *
  * We handle the IRQ according to _our_ priority (see setup.c),
- * then we just return.	 If multiple IRQs are pending then we will
+ * then we just return.  If multiple IRQs are pending then we will
  * just take another exception, big deal.
  */
 		.align	5
@@ -146,7 +146,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA t1,cpu_mask_nr_tbl
+		 PTR_LA	t1,cpu_mask_nr_tbl
 1:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -195,7 +195,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA t1,asic_mask_nr_tbl
+		 PTR_LA	t1,asic_mask_nr_tbl
 2:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -221,7 +221,7 @@
 		FEXPORT(cpu_all_int)		# HALT, timers, software junk
 		li	a0,DEC_CPU_IRQ_BASE
 		srl	t0,CAUSEB_IP
-		li	t1,CAUSEF_IP>>CAUSEB_IP # mask
+		li	t1,CAUSEF_IP>>CAUSEB_IP	# mask
 		b	1f
 		 li	t2,4			# nr of bits / 2
 
diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c
index 4b3e3a4..e04d973 100644
--- a/arch/mips/dec/ioasic-irq.c
+++ b/arch/mips/dec/ioasic-irq.c
@@ -1,7 +1,7 @@
 /*
  *	DEC I/O ASIC interrupts.
  *
- *	Copyright (c) 2002, 2003  Maciej W. Rozycki
+ *	Copyright (c) 2002, 2003, 2013  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -51,22 +51,51 @@
 	.irq_unmask = unmask_ioasic_irq,
 };
 
-void clear_ioasic_dma_irq(unsigned int irq)
+static void clear_ioasic_dma_irq(struct irq_data *d)
 {
 	u32 sir;
 
-	sir = ~(1 << (irq - ioasic_irq_base));
+	sir = ~(1 << (d->irq - ioasic_irq_base));
 	ioasic_write(IO_REG_SIR, sir);
+	fast_iob();
 }
 
 static struct irq_chip ioasic_dma_irq_type = {
 	.name = "IO-ASIC-DMA",
-	.irq_ack = ack_ioasic_irq,
+	.irq_ack = clear_ioasic_dma_irq,
 	.irq_mask = mask_ioasic_irq,
-	.irq_mask_ack = ack_ioasic_irq,
 	.irq_unmask = unmask_ioasic_irq,
+	.irq_eoi = clear_ioasic_dma_irq,
 };
 
+/*
+ * I/O ASIC implements two kinds of DMA interrupts, informational and
+ * error interrupts.
+ *
+ * The formers do not stop DMA and should be cleared as soon as possible
+ * so that if they retrigger before the handler has completed, usually as
+ * a side effect of actions taken by the handler, then they are reissued.
+ * These use the `handle_edge_irq' handler that clears the request right
+ * away.
+ *
+ * The latters stop DMA and do not resume it until the interrupt has been
+ * cleared.  This cannot be done until after a corrective action has been
+ * taken and this also means they will not retrigger.  Therefore they use
+ * the `handle_fasteoi_irq' handler that only clears the request on the
+ * way out.  Because MIPS processor interrupt inputs, one of which the I/O
+ * ASIC is cascaded to, are level-triggered it is recommended that error
+ * DMA interrupt action handlers are registered with the IRQF_ONESHOT flag
+ * set so that they are run with the interrupt line masked.
+ *
+ * This mask has `1' bits in the positions of informational interrupts.
+ */
+#define IO_IRQ_DMA_INFO							\
+	(IO_IRQ_MASK(IO_INR_SCC0A_RXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_SCC1A_RXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_ISDN_TXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_ISDN_RXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_ASC_DMA))
+
 void __init init_ioasic_irqs(int base)
 {
 	int i;
@@ -79,7 +108,9 @@
 		irq_set_chip_and_handler(i, &ioasic_irq_type,
 					 handle_level_irq);
 	for (; i < base + IO_IRQ_LINES; i++)
-		irq_set_chip(i, &ioasic_dma_irq_type);
+		irq_set_chip_and_handler(i, &ioasic_dma_irq_type,
+					 1 << (i - base) & IO_IRQ_DMA_INFO ?
+					 handle_edge_irq : handle_fasteoi_irq);
 
 	ioasic_irq_base = base;
 }
diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S
index c0d1522..8c84981 100644
--- a/arch/mips/dec/prom/call_o32.S
+++ b/arch/mips/dec/prom/call_o32.S
@@ -14,7 +14,7 @@
 
 /* Maximum number of arguments supported.  Must be even!  */
 #define O32_ARGC	32
-/* Number of static registers we save.	*/
+/* Number of static registers we save.  */
 #define O32_STATC	11
 /* Frame size for both of the above.  */
 #define O32_FRAMESZ	(4 * O32_ARGC + SZREG * O32_STATC)
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index 468f665..4e1761e 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -104,7 +104,7 @@
 	if (prom_is_rex(magic))
 		rex_clear_cache();
 
-	/* Register the early console.	*/
+	/* Register the early console.  */
 	register_prom_console();
 
 	/* Were we compiled with the right CPU option? */
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index 0aadac7..8c62316 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -22,7 +22,7 @@
 
 /*
  * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen
- * off the end of real memory.	Only suitable for the 2100/3100's (PMAX).
+ * off the end of real memory.  Only suitable for the 2100/3100's (PMAX).
  */
 
 #define CHUNK_SIZE 0x400000
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 741cb42..56e6e2c2 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -65,7 +65,7 @@
 /*
  * IRQ routing and priority tables.  Priorites are set as follows:
  *
- *		KN01	KN230	KN02	KN02-BA KN02-CA KN03
+ *		KN01	KN230	KN02	KN02-BA	KN02-CA	KN03
  *
  * MEMORY	CPU	CPU	CPU	ASIC	CPU	CPU
  * RTC		CPU	CPU	CPU	ASIC	CPU	CPU
@@ -413,7 +413,7 @@
 
 /*
  * Machine-specific initialisation for KN02-BA, aka DS5000/1xx
- * (xx = 20, 25, 33), aka 3min.	 Also applies to KN04(-BA), aka
+ * (xx = 20, 25, 33), aka 3min.  Also applies to KN04(-BA), aka
  * DS5000/150, aka 4min.
  */
 static int kn02ba_interrupt[DEC_NR_INTS] __initdata = {
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 13d61c0..3f74545 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -58,7 +58,7 @@
 
 /*
  * Memory segments (64bit kernel mode addresses)
- * The compatibility segments use the full 64-bit sign extended value.	Note
+ * The compatibility segments use the full 64-bit sign extended value.  Note
  * the R8000 doesn't have them so don't reference these in generic MIPS code.
  */
 #define XKUSEG			_CONST64_(0x0000000000000000)
@@ -131,7 +131,7 @@
 
 /*
  * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
- * the region, 3 bits for the CCA mode.	 This leaves 59 bits of which the
+ * the region, 3 bits for the CCA mode.  This leaves 59 bits of which the
  * R8000 implements most with its 48-bit physical address space.
  */
 #define TO_PHYS_MASK	_CONST64_(0x07ffffffffffffff)	/* 2^^59 - 1 */
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 08b6079..7eed2f2 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -1,5 +1,5 @@
 /*
- * Atomic operations that C can't guarantee us.	 Useful for
+ * Atomic operations that C can't guarantee us.  Useful for
  * resource counting etc..
  *
  * But use these as seldom as possible since they are much more slower
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index 314ab55..f26d8e1 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -18,7 +18,7 @@
  * over this barrier.  All reads preceding this primitive are guaranteed
  * to access memory (but not necessarily other CPUs' caches) before any
  * reads following this primitive that depend on the data return by
- * any of the preceding reads.	This primitive is much lighter weight than
+ * any of the preceding reads.  This primitive is much lighter weight than
  * rmb() on most CPUs, and is never heavier weight than is
  * rmb().
  *
@@ -43,7 +43,7 @@
  * </programlisting>
  *
  * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().	 However,
+ * two reads are separated by a read_barrier_depends().  However,
  * the following code, with the same initial values for "a" and "b":
  *
  * <programlisting>
@@ -57,7 +57,7 @@
  * </programlisting>
  *
  * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".	 Therefore, on some CPUs, such
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
  * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
  * in cases like this where there are no data dependencies.
  */
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 68f37e3..c75025f 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -14,56 +14,52 @@
 /*
  * Cache Operations available on all MIPS processors with R4000-style caches
  */
-#define Index_Invalidate_I	0x00
-#define Index_Writeback_Inv_D	0x01
-#define Index_Load_Tag_I	0x04
-#define Index_Load_Tag_D	0x05
-#define Index_Store_Tag_I	0x08
-#define Index_Store_Tag_D	0x09
-#if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I	0x00
-#else
-#define Hit_Invalidate_I	0x10
-#endif
-#define Hit_Invalidate_D	0x11
-#define Hit_Writeback_Inv_D	0x15
+#define Index_Invalidate_I		0x00
+#define Index_Writeback_Inv_D		0x01
+#define Index_Load_Tag_I		0x04
+#define Index_Load_Tag_D		0x05
+#define Index_Store_Tag_I		0x08
+#define Index_Store_Tag_D		0x09
+#define Hit_Invalidate_I		0x10
+#define Hit_Invalidate_D		0x11
+#define Hit_Writeback_Inv_D		0x15
 
 /*
  * R4000-specific cacheops
  */
-#define Create_Dirty_Excl_D	0x0d
-#define Fill			0x14
-#define Hit_Writeback_I		0x18
-#define Hit_Writeback_D		0x19
+#define Create_Dirty_Excl_D		0x0d
+#define Fill				0x14
+#define Hit_Writeback_I			0x18
+#define Hit_Writeback_D			0x19
 
 /*
  * R4000SC and R4400SC-specific cacheops
  */
-#define Index_Invalidate_SI	0x02
-#define Index_Writeback_Inv_SD	0x03
-#define Index_Load_Tag_SI	0x06
-#define Index_Load_Tag_SD	0x07
-#define Index_Store_Tag_SI	0x0A
-#define Index_Store_Tag_SD	0x0B
-#define Create_Dirty_Excl_SD	0x0f
-#define Hit_Invalidate_SI	0x12
-#define Hit_Invalidate_SD	0x13
-#define Hit_Writeback_Inv_SD	0x17
-#define Hit_Writeback_SD	0x1b
-#define Hit_Set_Virtual_SI	0x1e
-#define Hit_Set_Virtual_SD	0x1f
+#define Index_Invalidate_SI		0x02
+#define Index_Writeback_Inv_SD		0x03
+#define Index_Load_Tag_SI		0x06
+#define Index_Load_Tag_SD		0x07
+#define Index_Store_Tag_SI		0x0A
+#define Index_Store_Tag_SD		0x0B
+#define Create_Dirty_Excl_SD		0x0f
+#define Hit_Invalidate_SI		0x12
+#define Hit_Invalidate_SD		0x13
+#define Hit_Writeback_Inv_SD		0x17
+#define Hit_Writeback_SD		0x1b
+#define Hit_Set_Virtual_SI		0x1e
+#define Hit_Set_Virtual_SD		0x1f
 
 /*
  * R5000-specific cacheops
  */
-#define R5K_Page_Invalidate_S	0x17
+#define R5K_Page_Invalidate_S		0x17
 
 /*
  * RM7000-specific cacheops
  */
-#define Page_Invalidate_T	0x16
-#define Index_Store_Tag_T	0x0a
-#define Index_Load_Tag_T	0x06
+#define Page_Invalidate_T		0x16
+#define Index_Store_Tag_T		0x0a
+#define Index_Load_Tag_T		0x06
 
 /*
  * R10000-specific cacheops
@@ -71,17 +67,22 @@
  * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
  * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
  */
-#define Index_Writeback_Inv_S	0x03
-#define Index_Load_Tag_S	0x07
-#define Index_Store_Tag_S	0x0B
-#define Hit_Invalidate_S	0x13
-#define Cache_Barrier		0x14
-#define Hit_Writeback_Inv_S	0x17
-#define Index_Load_Data_I	0x18
-#define Index_Load_Data_D	0x19
-#define Index_Load_Data_S	0x1b
-#define Index_Store_Data_I	0x1c
-#define Index_Store_Data_D	0x1d
-#define Index_Store_Data_S	0x1f
+#define Index_Writeback_Inv_S		0x03
+#define Index_Load_Tag_S		0x07
+#define Index_Store_Tag_S		0x0B
+#define Hit_Invalidate_S		0x13
+#define Cache_Barrier			0x14
+#define Hit_Writeback_Inv_S		0x17
+#define Index_Load_Data_I		0x18
+#define Index_Load_Data_D		0x19
+#define Index_Load_Data_S		0x1b
+#define Index_Store_Data_I		0x1c
+#define Index_Store_Data_D		0x1d
+#define Index_Store_Data_S		0x1f
+
+/*
+ * Loongson2-specific cacheops
+ */
+#define Hit_Invalidate_I_Loongson23	0x00
 
 #endif	/* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h
index a6e505a..be4d62a 100644
--- a/arch/mips/include/asm/dec/ioasic.h
+++ b/arch/mips/include/asm/dec/ioasic.h
@@ -31,8 +31,6 @@
 	return ioasic_base[reg / 4];
 }
 
-extern void clear_ioasic_dma_irq(unsigned int irq);
-
 extern void init_ioasic_irqs(int base);
 
 extern int dec_ioasic_clocksource_init(void);
diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h
index a8665a7..8bd9597 100644
--- a/arch/mips/include/asm/dec/ioasic_addrs.h
+++ b/arch/mips/include/asm/dec/ioasic_addrs.h
@@ -40,7 +40,7 @@
 #define IOASIC_FLOPPY	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
 #define IOASIC_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
 #define IOASIC_FDC_DMA	(13*IOASIC_SLOT_SIZE)	/* FDC DMA (maxine) */
-#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE)	/* ??? */
+#define IOASIC_SCSI_DMA	(14*IOASIC_SLOT_SIZE)	/* ??? */
 #define IOASIC_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
 
 
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
index 0eb3241..88d9ffd 100644
--- a/arch/mips/include/asm/dec/kn01.h
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -57,12 +57,12 @@
 /*
  * System Control & Status Register bits.
  */
-#define KN01_CSR_MNFMOD		(1<<15) /* MNFMOD manufacturing jumper */
-#define KN01_CSR_STATUS		(1<<14) /* self-test result status output */
-#define KN01_CSR_PARDIS		(1<<13) /* parity error disable */
-#define KN01_CSR_CRSRTST	(1<<12) /* PCC test output */
-#define KN01_CSR_MONO		(1<<11) /* mono/color fb SIMM installed */
-#define KN01_CSR_MEMERR		(1<<10) /* write timeout error status & ack*/
+#define KN01_CSR_MNFMOD		(1<<15)	/* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS		(1<<14)	/* self-test result status output */
+#define KN01_CSR_PARDIS		(1<<13)	/* parity error disable */
+#define KN01_CSR_CRSRTST	(1<<12)	/* PCC test output */
+#define KN01_CSR_MONO		(1<<11)	/* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR		(1<<10)	/* write timeout error status & ack*/
 #define KN01_CSR_VINT		(1<<9)	/* PCC area detect #2 status & ack */
 #define KN01_CSR_TXDIS		(1<<8)	/* DZ11 transmit disable */
 #define KN01_CSR_VBGTRG		(1<<2)	/* blue DAC voltage over green (r/o) */
diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h
index 69dc2a9..92c0fe2 100644
--- a/arch/mips/include/asm/dec/kn02ca.h
+++ b/arch/mips/include/asm/dec/kn02ca.h
@@ -68,7 +68,7 @@
 #define KN03CA_IO_SSR_ISDN_RST	(1<<12)		/* ~ISDN (Am79C30A) reset */
 
 #define KN03CA_IO_SSR_FLOPPY_RST (1<<7)		/* ~FDC (82077) reset */
-#define KN03CA_IO_SSR_VIDEO_RST (1<<6)		/* ~framebuffer reset */
+#define KN03CA_IO_SSR_VIDEO_RST	(1<<6)		/* ~framebuffer reset */
 #define KN03CA_IO_SSR_AB_RST	(1<<5)		/* ACCESS.bus reset */
 #define KN03CA_IO_SSR_RES_4	(1<<4)		/* unused */
 #define KN03CA_IO_SSR_RES_3	(1<<4)		/* unused */
diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h
index 4465777..c0ead63 100644
--- a/arch/mips/include/asm/dec/prom.h
+++ b/arch/mips/include/asm/dec/prom.h
@@ -49,7 +49,7 @@
 
 #ifdef CONFIG_64BIT
 
-#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.	 */
+#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
 
 #else /* !CONFIG_64BIT */
 
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index cf3ae24..a66359e 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -331,6 +331,7 @@
 #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
 	dump_task_fpu(tsk, elf_fpregs)
 
+#define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	PAGE_SIZE
 
 /* This yields a mask that user programs can use to figure out what
diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h
deleted file mode 100644
index 6cb30f2..0000000
--- a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Platform data definition for Atheros AR933X UART
- *
- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _AR933X_UART_PLATFORM_H
-#define _AR933X_UART_PLATFORM_H
-
-struct ar933x_uart_platform_data {
-	unsigned	uartclk;
-};
-
-#endif /* _AR933X_UART_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
new file mode 100644
index 0000000..00867dd
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -0,0 +1,110 @@
+#ifndef __BCM47XX_BOARD_H
+#define __BCM47XX_BOARD_H
+
+enum bcm47xx_board {
+	BCM47XX_BOARD_ASUS_RTAC66U,
+	BCM47XX_BOARD_ASUS_RTN10,
+	BCM47XX_BOARD_ASUS_RTN10D,
+	BCM47XX_BOARD_ASUS_RTN10U,
+	BCM47XX_BOARD_ASUS_RTN12,
+	BCM47XX_BOARD_ASUS_RTN12B1,
+	BCM47XX_BOARD_ASUS_RTN12C1,
+	BCM47XX_BOARD_ASUS_RTN12D1,
+	BCM47XX_BOARD_ASUS_RTN12HP,
+	BCM47XX_BOARD_ASUS_RTN15U,
+	BCM47XX_BOARD_ASUS_RTN16,
+	BCM47XX_BOARD_ASUS_RTN53,
+	BCM47XX_BOARD_ASUS_RTN66U,
+	BCM47XX_BOARD_ASUS_WL300G,
+	BCM47XX_BOARD_ASUS_WL320GE,
+	BCM47XX_BOARD_ASUS_WL330GE,
+	BCM47XX_BOARD_ASUS_WL500GD,
+	BCM47XX_BOARD_ASUS_WL500GPV1,
+	BCM47XX_BOARD_ASUS_WL500GPV2,
+	BCM47XX_BOARD_ASUS_WL500W,
+	BCM47XX_BOARD_ASUS_WL520GC,
+	BCM47XX_BOARD_ASUS_WL520GU,
+	BCM47XX_BOARD_ASUS_WL700GE,
+	BCM47XX_BOARD_ASUS_WLHDD,
+
+	BCM47XX_BOARD_BELKIN_F7D4301,
+
+	BCM47XX_BOARD_BUFFALO_WBR2_G54,
+	BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
+	BCM47XX_BOARD_BUFFALO_WHR_G125,
+	BCM47XX_BOARD_BUFFALO_WHR_G54S,
+	BCM47XX_BOARD_BUFFALO_WHR_HP_G54,
+	BCM47XX_BOARD_BUFFALO_WLA2_G54L,
+	BCM47XX_BOARD_BUFFALO_WZR_G300N,
+	BCM47XX_BOARD_BUFFALO_WZR_RS_G54,
+	BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP,
+
+	BCM47XX_BOARD_CISCO_M10V1,
+	BCM47XX_BOARD_CISCO_M20V1,
+
+	BCM47XX_BOARD_DELL_TM2300,
+
+	BCM47XX_BOARD_DLINK_DIR130,
+	BCM47XX_BOARD_DLINK_DIR330,
+
+	BCM47XX_BOARD_HUAWEI_E970,
+
+	BCM47XX_BOARD_LINKSYS_E900V1,
+	BCM47XX_BOARD_LINKSYS_E1000V1,
+	BCM47XX_BOARD_LINKSYS_E1000V2,
+	BCM47XX_BOARD_LINKSYS_E1000V21,
+	BCM47XX_BOARD_LINKSYS_E1200V2,
+	BCM47XX_BOARD_LINKSYS_E2000V1,
+	BCM47XX_BOARD_LINKSYS_E3000V1,
+	BCM47XX_BOARD_LINKSYS_E3200V1,
+	BCM47XX_BOARD_LINKSYS_E4200V1,
+	BCM47XX_BOARD_LINKSYS_WRT150NV1,
+	BCM47XX_BOARD_LINKSYS_WRT150NV11,
+	BCM47XX_BOARD_LINKSYS_WRT160NV1,
+	BCM47XX_BOARD_LINKSYS_WRT160NV3,
+	BCM47XX_BOARD_LINKSYS_WRT300NV11,
+	BCM47XX_BOARD_LINKSYS_WRT310NV1,
+	BCM47XX_BOARD_LINKSYS_WRT310NV2,
+	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
+	BCM47XX_BOARD_LINKSYS_WRT610NV1,
+	BCM47XX_BOARD_LINKSYS_WRT610NV2,
+	BCM47XX_BOARD_LINKSYS_WRTSL54GS,
+
+	BCM47XX_BOARD_MOTOROLA_WE800G,
+	BCM47XX_BOARD_MOTOROLA_WR850GP,
+	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
+
+	BCM47XX_BOARD_NETGEAR_WGR614V8,
+	BCM47XX_BOARD_NETGEAR_WGR614V9,
+	BCM47XX_BOARD_NETGEAR_WNDR3300,
+	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
+	BCM47XX_BOARD_NETGEAR_WNDR3400V2,
+	BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
+	BCM47XX_BOARD_NETGEAR_WNDR3700V3,
+	BCM47XX_BOARD_NETGEAR_WNDR4000,
+	BCM47XX_BOARD_NETGEAR_WNDR4500V1,
+	BCM47XX_BOARD_NETGEAR_WNDR4500V2,
+	BCM47XX_BOARD_NETGEAR_WNR2000,
+	BCM47XX_BOARD_NETGEAR_WNR3500L,
+	BCM47XX_BOARD_NETGEAR_WNR3500U,
+	BCM47XX_BOARD_NETGEAR_WNR3500V2,
+	BCM47XX_BOARD_NETGEAR_WNR3500V2VC,
+	BCM47XX_BOARD_NETGEAR_WNR834BV2,
+
+	BCM47XX_BOARD_PHICOMM_M1,
+
+	BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
+
+	BCM47XX_BOARD_ZTE_H218N,
+
+	BCM47XX_BOARD_UNKNOWN,
+	BCM47XX_BOARD_NO,
+};
+
+#define BCM47XX_BOARD_MAX_NAME 30
+
+void bcm47xx_board_detect(void);
+enum bcm47xx_board bcm47xx_board_get(void);
+const char *bcm47xx_board_get_name(void);
+
+#endif /* __BCM47XX_BOARD_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
index b8e7be8..36a3fc1 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
@@ -48,4 +48,6 @@
 		printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
 }
 
+int bcm47xx_nvram_gpio_pin(const char *name);
+
 #endif /* __BCM47XX_NVRAM_H */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index 47fb247..f9f4486 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -52,23 +52,11 @@
 	return 0;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-	BUG();
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 1;
 }
 
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	BUG();
-	return 0;
-}
-
 dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
 phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
 
diff --git a/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
new file mode 100644
index 0000000..acce27f
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
@@ -0,0 +1,87 @@
+/*
+ *	CPU feature overrides for DECstation systems.  Two variations
+ *	are generally applicable.
+ *
+ *	Copyright (C) 2013  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H
+
+/* Generic ones first.  */
+#define cpu_has_tlb			1
+#define cpu_has_tx39_cache		0
+#define cpu_has_fpu			1
+#define cpu_has_divec			0
+#define cpu_has_prefetch		0
+#define cpu_has_mcheck			0
+#define cpu_has_ejtag			0
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+#define cpu_has_rixi			0
+#define cpu_has_vtag_icache		0
+#define cpu_has_ic_fills_f_dc		0
+#define cpu_has_pindexed_dcache		0
+#define cpu_has_local_ebase		0
+#define cpu_icache_snoops_remote_store	1
+#define cpu_has_mips_4			0
+#define cpu_has_mips_5			0
+#define cpu_has_mips32r1		0
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+#define cpu_has_userlocal		0
+
+/* R3k-specific ones.  */
+#ifdef CONFIG_CPU_R3000
+#define cpu_has_4kex			0
+#define cpu_has_3k_cache		1
+#define cpu_has_4k_cache		0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			0
+#define cpu_has_watch			0
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_llsc			0
+#define cpu_has_dc_aliases		0
+#define cpu_has_mips_2			0
+#define cpu_has_mips_3			0
+#define cpu_has_nofpuex			1
+#define cpu_has_inclusive_pcaches	0
+#define cpu_dcache_line_size()		4
+#define cpu_icache_line_size()		4
+#define cpu_scache_line_size()		0
+#endif /* CONFIG_CPU_R3000 */
+
+/* R4k-specific ones.  */
+#ifdef CONFIG_CPU_R4X00
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_32fpr			1
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_vce			1
+#define cpu_has_cache_cdex_p		1
+#define cpu_has_cache_cdex_s		1
+#define cpu_has_llsc			1
+#define cpu_has_dc_aliases		(PAGE_SIZE < 0x4000)
+#define cpu_has_mips_2			1
+#define cpu_has_mips_3			1
+#define cpu_has_nofpuex			0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+#define cpu_scache_line_size()		32
+#endif /* CONFIG_CPU_R4X00 */
+
+#endif /* __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 74cb992..a9e8f6b 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -47,16 +47,6 @@
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 #ifdef CONFIG_DMA_COHERENT
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
index 06c4419..4ffddfd 100644
--- a/arch/mips/include/asm/mach-ip27/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h
@@ -58,16 +58,6 @@
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 1;		/* IP27 non-cohernet mode is unsupported */
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
index 073f0c4..104cfbc 100644
--- a/arch/mips/include/asm/mach-ip32/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@@ -80,17 +80,6 @@
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-	return;
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;		/* IP32 is non-cohernet */
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
index 9fc1e9a..949003e 100644
--- a/arch/mips/include/asm/mach-jazz/dma-coherence.h
+++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h
@@ -48,16 +48,6 @@
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
index e143305..aeb2c05 100644
--- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -53,16 +53,6 @@
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
deleted file mode 100644
index b341108..0000000
--- a/arch/mips/include/asm/mach-powertv/asic.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_ASIC_H
-#define _ASM_MACH_POWERTV_ASIC_H
-
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <asm/mach-powertv/asic_regs.h>
-
-#define DVR_CAPABLE	(1<<0)
-#define PCIE_CAPABLE	(1<<1)
-#define FFS_CAPABLE	(1<<2)
-#define DISPLAY_CAPABLE (1<<3)
-
-/* Platform Family types
- * For compitability, the new value must be added in the end */
-enum family_type {
-	FAMILY_8500,
-	FAMILY_8500RNG,
-	FAMILY_4500,
-	FAMILY_1500,
-	FAMILY_8600,
-	FAMILY_4600,
-	FAMILY_4600VZA,
-	FAMILY_8600VZB,
-	FAMILY_1500VZE,
-	FAMILY_1500VZF,
-	FAMILY_8700,
-	FAMILIES
-};
-
-/* Register maps for each ASIC */
-extern const struct register_map calliope_register_map;
-extern const struct register_map cronus_register_map;
-extern const struct register_map gaia_register_map;
-extern const struct register_map zeus_register_map;
-
-extern struct resource dvr_cronus_resources[];
-extern struct resource dvr_gaia_resources[];
-extern struct resource dvr_zeus_resources[];
-extern struct resource non_dvr_calliope_resources[];
-extern struct resource non_dvr_cronus_resources[];
-extern struct resource non_dvr_cronuslite_resources[];
-extern struct resource non_dvr_gaia_resources[];
-extern struct resource non_dvr_vz_calliope_resources[];
-extern struct resource non_dvr_vze_calliope_resources[];
-extern struct resource non_dvr_vzf_calliope_resources[];
-extern struct resource non_dvr_zeus_resources[];
-
-extern void powertv_platform_init(void);
-extern void platform_alloc_bootmem(void);
-extern enum asic_type platform_get_asic(void);
-extern enum family_type platform_get_family(void);
-extern int platform_supports_dvr(void);
-extern int platform_supports_ffs(void);
-extern int platform_supports_pcie(void);
-extern int platform_supports_display(void);
-extern void configure_platform(void);
-
-/* Platform Resources */
-#define ASIC_RESOURCE_GET_EXISTS 1
-extern struct resource *asic_resource_get(const char *name);
-extern void platform_release_memory(void *baddr, int size);
-
-/* USB configuration */
-struct usb_hcd;			/* Forward reference */
-extern void platform_configure_usb_ehci(void);
-extern void platform_unconfigure_usb_ehci(void);
-extern void platform_configure_usb_ohci(void);
-extern void platform_unconfigure_usb_ohci(void);
-
-/* Resource for ASIC registers */
-extern struct resource asic_resource;
-extern int platform_usb_devices_init(struct platform_device **echi_dev,
-	struct platform_device **ohci_dev);
-
-/* Reboot Cause */
-extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
-extern void set_locked_reboot_cause(char code, unsigned int data,
-	unsigned int data2);
-
-enum sys_reboot_type {
-	sys_unknown_reboot = 0x00,	/* Unknown reboot cause */
-	sys_davic_change = 0x01,	/* Reboot due to change in DAVIC
-					 * mode */
-	sys_user_reboot = 0x02,		/* Reboot initiated by user */
-	sys_system_reboot = 0x03,	/* Reboot initiated by OS */
-	sys_trap_reboot = 0x04,		/* Reboot due to a CPU trap */
-	sys_silent_reboot = 0x05,	/* Silent reboot */
-	sys_boot_ldr_reboot = 0x06,	/* Bootloader reboot */
-	sys_power_up_reboot = 0x07,	/* Power on bootup.  Older
-					 * drivers may report as
-					 * userReboot. */
-	sys_code_change = 0x08,		/* Reboot to take code change.
-					 * Older drivers may report as
-					 * userReboot. */
-	sys_hardware_reset = 0x09,	/* HW watchdog or front-panel
-					 * reset button reset.	Older
-					 * drivers may report as
-					 * userReboot. */
-	sys_watchdogInterrupt = 0x0A	/* Pre-watchdog interrupt */
-};
-
-#endif /* _ASM_MACH_POWERTV_ASIC_H */
diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h
deleted file mode 100644
index 20348e8..0000000
--- a/arch/mips/include/asm/mach-powertv/asic_reg_map.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *				asic_reg_map.h
- *
- * A macro-enclosed list of the elements for the register_map structure for
- * use in defining and manipulating the structure.
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-REGISTER_MAP_ELEMENT(eic_slow0_strt_add)
-REGISTER_MAP_ELEMENT(eic_cfg_bits)
-REGISTER_MAP_ELEMENT(eic_ready_status)
-REGISTER_MAP_ELEMENT(chipver3)
-REGISTER_MAP_ELEMENT(chipver2)
-REGISTER_MAP_ELEMENT(chipver1)
-REGISTER_MAP_ELEMENT(chipver0)
-REGISTER_MAP_ELEMENT(uart1_intstat)
-REGISTER_MAP_ELEMENT(uart1_inten)
-REGISTER_MAP_ELEMENT(uart1_config1)
-REGISTER_MAP_ELEMENT(uart1_config2)
-REGISTER_MAP_ELEMENT(uart1_divisorhi)
-REGISTER_MAP_ELEMENT(uart1_divisorlo)
-REGISTER_MAP_ELEMENT(uart1_data)
-REGISTER_MAP_ELEMENT(uart1_status)
-REGISTER_MAP_ELEMENT(int_stat_3)
-REGISTER_MAP_ELEMENT(int_stat_2)
-REGISTER_MAP_ELEMENT(int_stat_1)
-REGISTER_MAP_ELEMENT(int_stat_0)
-REGISTER_MAP_ELEMENT(int_config)
-REGISTER_MAP_ELEMENT(int_int_scan)
-REGISTER_MAP_ELEMENT(ien_int_3)
-REGISTER_MAP_ELEMENT(ien_int_2)
-REGISTER_MAP_ELEMENT(ien_int_1)
-REGISTER_MAP_ELEMENT(ien_int_0)
-REGISTER_MAP_ELEMENT(int_level_3_3)
-REGISTER_MAP_ELEMENT(int_level_3_2)
-REGISTER_MAP_ELEMENT(int_level_3_1)
-REGISTER_MAP_ELEMENT(int_level_3_0)
-REGISTER_MAP_ELEMENT(int_level_2_3)
-REGISTER_MAP_ELEMENT(int_level_2_2)
-REGISTER_MAP_ELEMENT(int_level_2_1)
-REGISTER_MAP_ELEMENT(int_level_2_0)
-REGISTER_MAP_ELEMENT(int_level_1_3)
-REGISTER_MAP_ELEMENT(int_level_1_2)
-REGISTER_MAP_ELEMENT(int_level_1_1)
-REGISTER_MAP_ELEMENT(int_level_1_0)
-REGISTER_MAP_ELEMENT(int_level_0_3)
-REGISTER_MAP_ELEMENT(int_level_0_2)
-REGISTER_MAP_ELEMENT(int_level_0_1)
-REGISTER_MAP_ELEMENT(int_level_0_0)
-REGISTER_MAP_ELEMENT(int_docsis_en)
-REGISTER_MAP_ELEMENT(mips_pll_setup)
-REGISTER_MAP_ELEMENT(fs432x4b4_usb_ctl)
-REGISTER_MAP_ELEMENT(test_bus)
-REGISTER_MAP_ELEMENT(crt_spare)
-REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
-REGISTER_MAP_ELEMENT(usb2_strap)
-REGISTER_MAP_ELEMENT(ehci_hcapbase)
-REGISTER_MAP_ELEMENT(ohci_hc_revision)
-REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer)
-REGISTER_MAP_ELEMENT(usb2_control)
-REGISTER_MAP_ELEMENT(usb2_stbus_obc)
-REGISTER_MAP_ELEMENT(usb2_stbus_mess_size)
-REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size)
-REGISTER_MAP_ELEMENT(pcie_regs)
-REGISTER_MAP_ELEMENT(tim_ch)
-REGISTER_MAP_ELEMENT(tim_cl)
-REGISTER_MAP_ELEMENT(gpio_dout)
-REGISTER_MAP_ELEMENT(gpio_din)
-REGISTER_MAP_ELEMENT(gpio_dir)
-REGISTER_MAP_ELEMENT(watchdog)
-REGISTER_MAP_ELEMENT(front_panel)
-REGISTER_MAP_ELEMENT(misc_clk_ctl1)
-REGISTER_MAP_ELEMENT(misc_clk_ctl2)
-REGISTER_MAP_ELEMENT(crt_ext_ctl)
-REGISTER_MAP_ELEMENT(register_maps)
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
deleted file mode 100644
index 06712ab..0000000
--- a/arch/mips/include/asm/mach-powertv/asic_regs.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __ASM_MACH_POWERTV_ASIC_H_
-#define __ASM_MACH_POWERTV_ASIC_H_
-#include <linux/io.h>
-
-/* ASIC types */
-enum asic_type {
-	ASIC_UNKNOWN,
-	ASIC_ZEUS,
-	ASIC_CALLIOPE,
-	ASIC_CRONUS,
-	ASIC_CRONUSLITE,
-	ASIC_GAIA,
-	ASICS			/* Number of supported ASICs */
-};
-
-/* hardcoded values read from Chip Version registers */
-#define CRONUS_10	0x0B4C1C20
-#define CRONUS_11	0x0B4C1C21
-#define CRONUSLITE_10	0x0B4C1C40
-
-#define NAND_FLASH_BASE		0x03000000
-#define CALLIOPE_IO_BASE	0x08000000
-#define GAIA_IO_BASE		0x09000000
-#define CRONUS_IO_BASE		0x09000000
-#define ZEUS_IO_BASE		0x09000000
-
-#define ASIC_IO_SIZE		0x01000000
-
-/* Definitions for backward compatibility */
-#define UART1_INTSTAT	uart1_intstat
-#define UART1_INTEN	uart1_inten
-#define UART1_CONFIG1	uart1_config1
-#define UART1_CONFIG2	uart1_config2
-#define UART1_DIVISORHI uart1_divisorhi
-#define UART1_DIVISORLO uart1_divisorlo
-#define UART1_DATA	uart1_data
-#define UART1_STATUS	uart1_status
-
-/* ASIC register enumeration */
-union register_map_entry {
-	unsigned long phys;
-	u32 *virt;
-};
-
-#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
-struct register_map {
-#include <asm/mach-powertv/asic_reg_map.h>
-};
-#undef REGISTER_MAP_ELEMENT
-
-/**
- * register_map_offset_phys - add an offset to the physical address
- * @map:	Pointer to the &struct register_map
- * @offset:	Value to add
- *
- * Only adds the base to non-zero physical addresses
- */
-static inline void register_map_offset_phys(struct register_map *map,
-	unsigned long offset)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		if (map->x.phys != 0)					\
-			map->x.phys += offset;				\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-/**
- * register_map_virtualize - Convert &register_map to virtual addresses
- * @map:	Pointer to &register_map to virtualize
- */
-static inline void register_map_virtualize(struct register_map *map)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		map->x.virt = (!map->x.phys) ? NULL :			\
-			UNCAC_ADDR(phys_to_virt(map->x.phys));		\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-extern struct register_map _asic_register_map;
-extern unsigned long asic_phy_base;
-
-/*
- * Macros to interface to registers through their ioremapped address
- * asic_reg_phys_addr	Returns the physical address of the given register
- * asic_reg_addr	Returns the iomapped virtual address of the given
- *			register.
- */
-#define asic_reg_addr(x)	(_asic_register_map.x.virt)
-#define asic_reg_phys_addr(x)	(virt_to_phys((void *) CAC_ADDR(	\
-					(unsigned long) asic_reg_addr(x))))
-
-/*
- * The asic_reg macro is gone. It should be replaced by either asic_read or
- * asic_write, as appropriate.
- */
-
-#define asic_read(x)		readl(asic_reg_addr(x))
-#define asic_write(v, x)	writel(v, asic_reg_addr(x))
-
-extern void asic_irq_init(void);
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h b/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h
deleted file mode 100644
index 58c76ec..0000000
--- a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2010  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
-#define _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
-#define cpu_has_tlb			1
-#define cpu_has_4kex			1
-#define cpu_has_3k_cache		0
-#define cpu_has_4k_cache		1
-#define cpu_has_tx39_cache		0
-#define cpu_has_fpu			0
-#define cpu_has_counter			1
-#define cpu_has_watch			1
-#define cpu_has_divec			1
-#define cpu_has_vce			0
-#define cpu_has_cache_cdex_p		0
-#define cpu_has_cache_cdex_s		0
-#define cpu_has_mcheck			1
-#define cpu_has_ejtag			1
-#define cpu_has_llsc			1
-#define cpu_has_mips16			0
-#define cpu_has_mdmx			0
-#define cpu_has_mips3d			0
-#define cpu_has_smartmips		0
-#define cpu_has_vtag_icache		0
-#define cpu_has_dc_aliases		0
-#define cpu_has_ic_fills_f_dc		0
-#define cpu_has_mips32r1		0
-#define cpu_has_mips32r2		1
-#define cpu_has_mips64r1		0
-#define cpu_has_mips64r2		0
-#define cpu_has_dsp			0
-#define cpu_has_dsp2			0
-#define cpu_has_mipsmt			0
-#define cpu_has_userlocal		0
-#define cpu_has_nofpuex			0
-#define cpu_has_64bits			0
-#define cpu_has_64bit_zero_reg		0
-#define cpu_has_vint			1
-#define cpu_has_veic			1
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()		32
-#define cpu_icache_line_size()		32
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
deleted file mode 100644
index f831672..0000000
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Version from mach-generic modified to support PowerTV port
- * Portions Copyright (C) 2009	Cisco Systems, Inc.
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-
-#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
-#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
-
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <asm/mach-powertv/asic.h>
-
-static inline bool is_kseg2(void *addr)
-{
-	return (unsigned long)addr >= KSEG2;
-}
-
-static inline unsigned long virt_to_phys_from_pte(void *addr)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	unsigned long virt_addr = (unsigned long)addr;
-	unsigned long phys_addr = 0UL;
-
-	/* get the page global directory. */
-	pgd = pgd_offset_k(virt_addr);
-
-	if (!pgd_none(*pgd)) {
-		/* get the page upper directory */
-		pud = pud_offset(pgd, virt_addr);
-		if (!pud_none(*pud)) {
-			/* get the page middle directory */
-			pmd = pmd_offset(pud, virt_addr);
-			if (!pmd_none(*pmd)) {
-				/* get a pointer to the page table entry */
-				ptep = pte_offset(pmd, virt_addr);
-				pte = *ptep;
-				/* check for a valid page */
-				if (pte_present(pte)) {
-					/* get the physical address the page is
-					 * referring to */
-					phys_addr = (unsigned long)
-						page_to_phys(pte_page(pte));
-					/* add the offset within the page */
-					phys_addr |= (virt_addr & ~PAGE_MASK);
-				}
-			}
-		}
-	}
-
-	return phys_addr;
-}
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	if (is_kseg2(addr))
-		return phys_to_dma(virt_to_phys_from_pte(addr));
-	else
-		return phys_to_dma(virt_to_phys(addr));
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return phys_to_dma(page_to_phys(page));
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_to_phys(dma_addr);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h
deleted file mode 100644
index 6c463be..0000000
--- a/arch/mips/include/asm/mach-powertv/interrupts.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_
-#define _ASM_MACH_POWERTV_INTERRUPTS_H_
-
-/*
- * Defines for all of the interrupt lines
- */
-
-/* Definitions for backward compatibility */
-#define kIrq_Uart1		irq_uart1
-
-#define ibase 0
-
-/*------------- Register: int_stat_3 */
-/* 126 unused (bit 31) */
-#define irq_asc2video		(ibase+126)	/* ASC 2 Video Interrupt */
-#define irq_asc1video		(ibase+125)	/* ASC 1 Video Interrupt */
-#define irq_comms_block_wd	(ibase+124)	/* ASC 1 Video Interrupt */
-#define irq_fdma_mailbox	(ibase+123)	/* FDMA Mailbox Output */
-#define irq_fdma_gp		(ibase+122)	/* FDMA GP Output */
-#define irq_mips_pic		(ibase+121)	/* MIPS Performance Counter
-						 * Interrupt */
-#define irq_mips_timer		(ibase+120)	/* MIPS Timer Interrupt */
-#define irq_memory_protect	(ibase+119)	/* Memory Protection Interrupt
-						 * -- Ored by glue logic inside
-						 *  SPARC ILC (see
-						 *  INT_MEM_PROT_STAT, below,
-						 *  for individual interrupts)
-						 */
-/* 118 unused (bit 22) */
-#define irq_sbag		(ibase+117)	/* SBAG Interrupt -- Ored by
-						 * glue logic inside SPARC ILC
-						 * (see INT_SBAG_STAT, below,
-						 * for individual interrupts) */
-#define irq_qam_b_fec		(ibase+116)	/* QAM	B FEC Interrupt */
-#define irq_qam_a_fec		(ibase+115)	/* QAM A FEC Interrupt */
-/* 114 unused	(bit 18) */
-#define irq_mailbox		(ibase+113)	/* Mailbox Debug Interrupt  --
-						 * Ored by glue logic inside
-						 * SPARC ILC (see
-						 * INT_MAILBOX_STAT, below, for
-						 * individual interrupts) */
-#define irq_fuse_stat1		(ibase+112)	/* Fuse Status 1 */
-#define irq_fuse_stat2		(ibase+111)	/* Fuse Status 2 */
-#define irq_fuse_stat3		(ibase+110)	/* Blitter Interrupt / Fuse
-						 * Status 3 */
-#define irq_blitter		(ibase+110)	/* Blitter Interrupt / Fuse
-						 * Status 3 */
-#define irq_avc1_pp0		(ibase+109)	/* AVC Decoder #1 PP0
-						 * Interrupt */
-#define irq_avc1_pp1		(ibase+108)	/* AVC Decoder #1 PP1
-						 * Interrupt */
-#define irq_avc1_mbe		(ibase+107)	/* AVC Decoder #1 MBE
-						 * Interrupt */
-#define irq_avc2_pp0		(ibase+106)	/* AVC Decoder #2 PP0
-						 * Interrupt */
-#define irq_avc2_pp1		(ibase+105)	/* AVC Decoder #2 PP1
-						 * Interrupt */
-#define irq_avc2_mbe		(ibase+104)	/* AVC Decoder #2 MBE
-						 * Interrupt */
-#define irq_zbug_spi		(ibase+103)	/* Zbug SPI Slave Interrupt */
-#define irq_qam_mod2		(ibase+102)	/* QAM Modulator 2 DMA
-						 * Interrupt */
-#define irq_ir_rx		(ibase+101)	/* IR RX 2 Interrupt */
-#define irq_aud_dsp2		(ibase+100)	/* Audio DSP #2 Interrupt */
-#define irq_aud_dsp1		(ibase+99)	/* Audio DSP #1 Interrupt */
-#define irq_docsis		(ibase+98)	/* DOCSIS Debug Interrupt */
-#define irq_sd_dvp1		(ibase+97)	/* SD DVP #1 Interrupt */
-#define irq_sd_dvp2		(ibase+96)	/* SD DVP #2 Interrupt */
-/*------------- Register: int_stat_2 */
-#define irq_hd_dvp		(ibase+95)	/* HD DVP Interrupt */
-#define kIrq_Prewatchdog	(ibase+94)	/* watchdog Pre-Interrupt */
-#define irq_timer2		(ibase+93)	/* Programmable Timer
-						 * Interrupt 2 */
-#define irq_1394		(ibase+92)	/* 1394 Firewire Interrupt */
-#define irq_usbohci		(ibase+91)	/* USB 2.0 OHCI Interrupt */
-#define irq_usbehci		(ibase+90)	/* USB 2.0 EHCI Interrupt */
-#define irq_pciexp		(ibase+89)	/* PCI Express 0 Interrupt */
-#define irq_pciexp0		(ibase+89)	/* PCI Express 0 Interrupt */
-#define irq_afe1		(ibase+88)	/* AFE 1 Interrupt */
-#define irq_sata		(ibase+87)	/* SATA 1 Interrupt */
-#define irq_sata1		(ibase+87)	/* SATA 1 Interrupt */
-#define irq_dtcp		(ibase+86)	/* DTCP Interrupt */
-#define irq_pciexp1		(ibase+85)	/* PCI Express 1 Interrupt */
-/* 84 unused	(bit 20) */
-/* 83 unused	(bit 19) */
-/* 82 unused	(bit 18) */
-#define irq_sata2		(ibase+81)	/* SATA2 Interrupt */
-#define irq_uart2		(ibase+80)	/* UART2 Interrupt */
-#define irq_legacy_usb		(ibase+79)	/* Legacy USB Host ISR (1.1
-						 * Host module) */
-#define irq_pod			(ibase+78)	/* POD Interrupt */
-#define irq_slave_usb		(ibase+77)	/* Slave USB */
-#define irq_denc1		(ibase+76)	/* DENC #1 VTG Interrupt */
-#define irq_vbi_vtg		(ibase+75)	/* VBI VTG Interrupt */
-#define irq_afe2		(ibase+74)	/* AFE 2 Interrupt */
-#define irq_denc2		(ibase+73)	/* DENC #2 VTG Interrupt */
-#define irq_asc2		(ibase+72)	/* ASC #2 Interrupt */
-#define irq_asc1		(ibase+71)	/* ASC #1 Interrupt */
-#define irq_mod_dma		(ibase+70)	/* Modulator DMA Interrupt */
-#define irq_byte_eng1		(ibase+69)	/* Byte Engine Interrupt [1] */
-#define irq_byte_eng0		(ibase+68)	/* Byte Engine Interrupt [0] */
-/* 67 unused	(bit 03) */
-/* 66 unused	(bit 02) */
-/* 65 unused	(bit 01) */
-/* 64 unused	(bit 00) */
-/*------------- Register: int_stat_1 */
-/* 63 unused	(bit 31) */
-/* 62 unused	(bit 30) */
-/* 61 unused	(bit 29) */
-/* 60 unused	(bit 28) */
-/* 59 unused	(bit 27) */
-/* 58 unused	(bit 26) */
-/* 57 unused	(bit 25) */
-/* 56 unused	(bit 24) */
-#define irq_buf_dma_mem2mem	(ibase+55)	/* BufDMA Memory to Memory
-						 * Interrupt */
-#define irq_buf_dma_usbtransmit (ibase+54)	/* BufDMA USB Transmit
-						 * Interrupt */
-#define irq_buf_dma_qpskpodtransmit (ibase+53)	/* BufDMA QPSK/POD Tramsit
-						 * Interrupt */
-#define irq_buf_dma_transmit_error (ibase+52)	/* BufDMA Transmit Error
-						 * Interrupt */
-#define irq_buf_dma_usbrecv	(ibase+51)	/* BufDMA USB Receive
-						 * Interrupt */
-#define irq_buf_dma_qpskpodrecv (ibase+50)	/* BufDMA QPSK/POD Receive
-						 * Interrupt */
-#define irq_buf_dma_recv_error	(ibase+49)	/* BufDMA Receive Error
-						 * Interrupt */
-#define irq_qamdma_transmit_play (ibase+48)	/* QAMDMA Transmit/Play
-						 * Interrupt */
-#define irq_qamdma_transmit_error (ibase+47)	/* QAMDMA Transmit Error
-						 * Interrupt */
-#define irq_qamdma_recv2high	(ibase+46)	/* QAMDMA Receive 2 High
-						 * (Chans 63-32) */
-#define irq_qamdma_recv2low	(ibase+45)	/* QAMDMA Receive 2 Low
-						 * (Chans 31-0) */
-#define irq_qamdma_recv1high	(ibase+44)	/* QAMDMA Receive 1 High
-						 * (Chans 63-32) */
-#define irq_qamdma_recv1low	(ibase+43)	/* QAMDMA Receive 1 Low
-						 * (Chans 31-0) */
-#define irq_qamdma_recv_error	(ibase+42)	/* QAMDMA Receive Error
-						 * Interrupt */
-#define irq_mpegsplice		(ibase+41)	/* MPEG Splice Interrupt */
-#define irq_deinterlace_rdy	(ibase+40)	/* Deinterlacer Frame Ready
-						 * Interrupt */
-#define irq_ext_in0		(ibase+39)	/* External Interrupt irq_in0 */
-#define irq_gpio3		(ibase+38)	/* GP I/O IRQ 3 - From GP I/O
-						 * Module */
-#define irq_gpio2		(ibase+37)	/* GP I/O IRQ 2 - From GP I/O
-						 * Module (ABE_intN) */
-#define irq_pcrcmplt1		(ibase+36)	/* PCR Capture Complete	 or
-						 * Discontinuity 1 */
-#define irq_pcrcmplt2		(ibase+35)	/* PCR Capture Complete or
-						 * Discontinuity 2 */
-#define irq_parse_peierr	(ibase+34)	/* PID Parser Error Detect
-						 * (PEI) */
-#define irq_parse_cont_err	(ibase+33)	/* PID Parser continuity error
-						 * detect */
-#define irq_ds1framer		(ibase+32)	/* DS1 Framer Interrupt */
-/*------------- Register: int_stat_0 */
-#define irq_gpio1		(ibase+31)	/* GP I/O IRQ 1 - From GP I/O
-						 * Module */
-#define irq_gpio0		(ibase+30)	/* GP I/O IRQ 0 - From GP I/O
-						 * Module */
-#define irq_qpsk_out_aloha	(ibase+29)	/* QPSK Output Slotted Aloha
-						 * (chan 3) Transmission
-						 * Completed OK */
-#define irq_qpsk_out_tdma	(ibase+28)	/* QPSK Output TDMA (chan 2)
-						 * Transmission Completed OK */
-#define irq_qpsk_out_reserve	(ibase+27)	/* QPSK Output Reservation
-						 * (chan 1) Transmission
-						 * Completed OK */
-#define irq_qpsk_out_aloha_err	(ibase+26)	/* QPSK Output Slotted Aloha
-						 * (chan 3)Transmission
-						 * completed with Errors. */
-#define irq_qpsk_out_tdma_err	(ibase+25)	/* QPSK Output TDMA (chan 2)
-						 * Transmission completed with
-						 * Errors. */
-#define irq_qpsk_out_rsrv_err	(ibase+24)	/* QPSK Output Reservation
-						 * (chan 1) Transmission
-						 * completed with Errors */
-#define irq_aloha_fail		(ibase+23)	/* Unsuccessful Resend of Aloha
-						 * for N times. Aloha retry
-						 * timeout for channel 3. */
-#define irq_timer1		(ibase+22)	/* Programmable Timer
-						 * Interrupt */
-#define irq_keyboard		(ibase+21)	/* Keyboard Module Interrupt */
-#define irq_i2c			(ibase+20)	/* I2C Module Interrupt */
-#define irq_spi			(ibase+19)	/* SPI Module Interrupt */
-#define irq_irblaster		(ibase+18)	/* IR Blaster Interrupt */
-#define irq_splice_detect	(ibase+17)	/* PID Key Change Interrupt or
-						 * Splice Detect Interrupt */
-#define irq_se_micro		(ibase+16)	/* Secure Micro I/F Module
-						 * Interrupt */
-#define irq_uart1		(ibase+15)	/* UART Interrupt */
-#define irq_irrecv		(ibase+14)	/* IR Receiver Interrupt */
-#define irq_host_int1		(ibase+13)	/* Host-to-Host Interrupt 1 */
-#define irq_host_int0		(ibase+12)	/* Host-to-Host Interrupt 0 */
-#define irq_qpsk_hecerr		(ibase+11)	/* QPSK HEC Error Interrupt */
-#define irq_qpsk_crcerr		(ibase+10)	/* QPSK AAL-5 CRC Error
-						 * Interrupt */
-/* 9 unused	(bit 09) */
-/* 8 unused	(bit 08) */
-#define irq_psicrcerr		(ibase+7)	/* QAM PSI CRC Error
-						 * Interrupt */
-#define irq_psilength_err	(ibase+6)	/* QAM PSI Length Error
-						 * Interrupt */
-#define irq_esfforward		(ibase+5)	/* ESF Interrupt Mark From
-						 * Forward Path Reference -
-						 * every 3ms when forward Mbits
-						 * and forward slot control
-						 * bytes are updated. */
-#define irq_esfreverse		(ibase+4)	/* ESF Interrupt Mark from
-						 * Reverse Path Reference -
-						 * delayed from forward mark by
-						 * the ranging delay plus a
-						 * fixed amount. When reverse
-						 * Mbits and reverse slot
-						 * control bytes are updated.
-						 * Occurs every 3ms for 3.0M and
-						 * 1.554 M upstream rates and
-						 * every 6 ms for 256K upstream
-						 * rate. */
-#define irq_aloha_timeout	(ibase+3)	/* Slotted-Aloha timeout on
-						 * Channel 1. */
-#define irq_reservation		(ibase+2)	/* Partial (or Incremental)
-						 * Reservation Message Completed
-						 * or Slotted aloha verify for
-						 * channel 1. */
-#define irq_aloha3		(ibase+1)	/* Slotted-Aloha Message Verify
-						 * Interrupt or Reservation
-						 * increment completed for
-						 * channel 3. */
-#define irq_mpeg_d		(ibase+0)	/* MPEG Decoder Interrupt */
-#endif	/* _ASM_MACH_POWERTV_INTERRUPTS_H_ */
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
deleted file mode 100644
index c86ef09..0000000
--- a/arch/mips/include/asm/mach-powertv/ioremap.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * Portions Copyright (C)  Cisco Systems, Inc.
- */
-#ifndef __ASM_MACH_POWERTV_IOREMAP_H
-#define __ASM_MACH_POWERTV_IOREMAP_H
-
-#include <linux/types.h>
-#include <linux/log2.h>
-#include <linux/compiler.h>
-
-#include <asm/pgtable-bits.h>
-#include <asm/addrspace.h>
-
-/* We're going to mess with bits, so get sizes */
-#define IOR_BPC			8			/* Bits per char */
-#define IOR_PHYS_BITS		(IOR_BPC * sizeof(phys_addr_t))
-#define IOR_DMA_BITS		(IOR_BPC * sizeof(dma_addr_t))
-
-/*
- * Define the granularity of physical/DMA mapping in terms of the number
- * of bits that defines the offset within a grain. These will be the
- * least significant bits of the address. The rest of a physical or DMA
- * address will be used to index into an appropriate table to find the
- * offset to add to the address to yield the corresponding DMA or physical
- * address, respectively.
- */
-#define IOR_LSBITS		22			/* Bits in a grain */
-
-/*
- * Compute the number of most significant address bits after removing those
- * used for the offset within a grain and then compute the number of table
- * entries for the conversion.
- */
-#define IOR_PHYS_MSBITS		(IOR_PHYS_BITS - IOR_LSBITS)
-#define IOR_NUM_PHYS_TO_DMA	((phys_addr_t) 1 << IOR_PHYS_MSBITS)
-
-#define IOR_DMA_MSBITS		(IOR_DMA_BITS - IOR_LSBITS)
-#define IOR_NUM_DMA_TO_PHYS	((dma_addr_t) 1 << IOR_DMA_MSBITS)
-
-/*
- * Define data structures used as elements in the arrays for the conversion
- * between physical and DMA addresses. We do some slightly fancy math to
- * compute the width of the offset element of the conversion tables so
- * that we can have the smallest conversion tables. Next, round up the
- * sizes to the next higher power of two, i.e. the offset element will have
- * 8, 16, 32, 64, etc. bits. This eliminates the need to mask off any
- * bits.  Finally, we compute a shift value that puts the most significant
- * bits of the offset into the most significant bits of the offset element.
- * This makes it more efficient on processors without barrel shifters and
- * easier to see the values if the conversion table is dumped in binary.
- */
-#define _IOR_OFFSET_WIDTH(n)	(1 << order_base_2(n))
-#define IOR_OFFSET_WIDTH(n) \
-	(_IOR_OFFSET_WIDTH(n) < 8 ? 8 : _IOR_OFFSET_WIDTH(n))
-
-#define IOR_PHYS_OFFSET_BITS	IOR_OFFSET_WIDTH(IOR_PHYS_MSBITS)
-#define IOR_PHYS_SHIFT		(IOR_PHYS_BITS - IOR_PHYS_OFFSET_BITS)
-
-#define IOR_DMA_OFFSET_BITS	IOR_OFFSET_WIDTH(IOR_DMA_MSBITS)
-#define IOR_DMA_SHIFT		(IOR_DMA_BITS - IOR_DMA_OFFSET_BITS)
-
-struct ior_phys_to_dma {
-	dma_addr_t offset:IOR_DMA_OFFSET_BITS __packed
-		__aligned((IOR_DMA_OFFSET_BITS / IOR_BPC));
-};
-
-struct ior_dma_to_phys {
-	dma_addr_t offset:IOR_PHYS_OFFSET_BITS __packed
-		__aligned((IOR_PHYS_OFFSET_BITS / IOR_BPC));
-};
-
-extern struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
-extern struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
-
-static inline dma_addr_t _phys_to_dma_offset_raw(phys_addr_t phys)
-{
-	return (dma_addr_t)_ior_phys_to_dma[phys >> IOR_LSBITS].offset;
-}
-
-static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
-{
-	return (dma_addr_t)_ior_dma_to_phys[dma >> IOR_LSBITS].offset;
-}
-
-/* These are not portable and should not be used in drivers. Drivers should
- * be using ioremap() and friends to map physical addresses to virtual
- * addresses and dma_map*() and friends to map virtual addresses into DMA
- * addresses and back.
- */
-static inline dma_addr_t phys_to_dma(phys_addr_t phys)
-{
-	return phys + (_phys_to_dma_offset_raw(phys) << IOR_PHYS_SHIFT);
-}
-
-static inline phys_addr_t dma_to_phys(dma_addr_t dma)
-{
-	return dma + (_dma_to_phys_offset_raw(dma) << IOR_DMA_SHIFT);
-}
-
-extern void ioremap_add_map(dma_addr_t phys, phys_addr_t alias,
-	dma_addr_t size);
-
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
-{
-	return phys_addr;
-}
-
-/*
- * Handle the special case of addresses the area aliased into the first
- * 512 MiB of the processor's physical address space. These turn into either
- * kseg0 or kseg1 addresses, depending on flags.
- */
-static inline void __iomem *plat_ioremap(phys_t start, unsigned long size,
-	unsigned long flags)
-{
-	phys_addr_t start_offset;
-	void __iomem *result = NULL;
-
-	/* Start by checking to see whether this is an aliased address */
-	start_offset = _dma_to_phys_offset_raw(start);
-
-	/*
-	 * If:
-	 * o	the memory is aliased into the first 512 MiB, and
-	 * o	the start and end are in the same RAM bank, and
-	 * o	we don't have a zero size or wrap around, and
-	 * o	we are supposed to create an uncached mapping,
-	 *	handle this is a kseg0 or kseg1 address
-	 */
-	if (start_offset != 0) {
-		phys_addr_t last;
-		dma_addr_t dma_to_phys_offset;
-
-		last = start + size - 1;
-		dma_to_phys_offset =
-			_dma_to_phys_offset_raw(last) << IOR_DMA_SHIFT;
-
-		if (dma_to_phys_offset == start_offset &&
-			size != 0 && start <= last) {
-			phys_t adjusted_start;
-			adjusted_start = start + start_offset;
-			if (flags == _CACHE_UNCACHED)
-				result = (void __iomem *) (unsigned long)
-					CKSEG1ADDR(adjusted_start);
-			else
-				result = (void __iomem *) (unsigned long)
-					CKSEG0ADDR(adjusted_start);
-		}
-	}
-
-	return result;
-}
-
-static inline int plat_iounmap(const volatile void __iomem *addr)
-{
-	return 0;
-}
-#endif /* __ASM_MACH_POWERTV_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-powertv/irq.h b/arch/mips/include/asm/mach-powertv/irq.h
deleted file mode 100644
index 4bd5d0c..0000000
--- a/arch/mips/include/asm/mach-powertv/irq.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_IRQ_H
-#define _ASM_MACH_POWERTV_IRQ_H
-#include <asm/mach-powertv/interrupts.h>
-
-#define MIPS_CPU_IRQ_BASE	ibase
-#define NR_IRQS			127
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/powertv-clock.h b/arch/mips/include/asm/mach-powertv/powertv-clock.h
deleted file mode 100644
index 6f3e9a0..0000000
--- a/arch/mips/include/asm/mach-powertv/powertv-clock.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-/*
- * Local definitions for the powertv PCI code
- */
-
-#ifndef _POWERTV_PCI_POWERTV_PCI_H_
-#define _POWERTV_PCI_POWERTV_PCI_H_
-extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-extern int asic_pcie_init(void);
-extern int asic_pcie_init(void);
-
-extern int log_level;
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/war.h b/arch/mips/include/asm/mach-powertv/war.h
deleted file mode 100644
index c5651c8..0000000
--- a/arch/mips/include/asm/mach-powertv/war.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * This version for the PowerTV platform copied from the Malta version.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- */
-#ifndef __ASM_MACH_POWERTV_WAR_H
-#define __ASM_MACH_POWERTV_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	1
-#define MIPS_CACHE_SYNC_WAR		1
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define ICACHE_REFILLS_WORKAROUND_WAR	1
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MACH_POWERTV_WAR_H */
diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h
index a02596c..e332279 100644
--- a/arch/mips/include/asm/mips-boards/piix4.h
+++ b/arch/mips/include/asm/mips-boards/piix4.h
@@ -1,6 +1,7 @@
 /*
  * Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -20,61 +21,26 @@
 #ifndef __ASM_MIPS_BOARDS_PIIX4_H
 #define __ASM_MIPS_BOARDS_PIIX4_H
 
-/************************************************************************
- *  IO register offsets
- ************************************************************************/
-#define PIIX4_ICTLR1_ICW1	0x20
-#define PIIX4_ICTLR1_ICW2	0x21
-#define PIIX4_ICTLR1_ICW3	0x21
-#define PIIX4_ICTLR1_ICW4	0x21
-#define PIIX4_ICTLR2_ICW1	0xa0
-#define PIIX4_ICTLR2_ICW2	0xa1
-#define PIIX4_ICTLR2_ICW3	0xa1
-#define PIIX4_ICTLR2_ICW4	0xa1
-#define PIIX4_ICTLR1_OCW1	0x21
-#define PIIX4_ICTLR1_OCW2	0x20
-#define PIIX4_ICTLR1_OCW3	0x20
-#define PIIX4_ICTLR1_OCW4	0x20
-#define PIIX4_ICTLR2_OCW1	0xa1
-#define PIIX4_ICTLR2_OCW2	0xa0
-#define PIIX4_ICTLR2_OCW3	0xa0
-#define PIIX4_ICTLR2_OCW4	0xa0
+/* PIRQX Route Control */
+#define PIIX4_FUNC0_PIRQRC			0x60
+#define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE	(1 << 7)
+#define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK		0xf
+#define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX		16
+/* Top Of Memory */
+#define PIIX4_FUNC0_TOM				0x69
+#define   PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK		0xf0
+/* Deterministic Latency Control */
+#define PIIX4_FUNC0_DLC				0x82
+#define   PIIX4_FUNC0_DLC_USBPR_EN			(1 << 2)
+#define   PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN		(1 << 1)
+#define   PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN	(1 << 0)
 
-
-/************************************************************************
- *  Register encodings.
- ************************************************************************/
-#define PIIX4_OCW2_NSEOI	(0x1 << 5)
-#define PIIX4_OCW2_SEOI		(0x3 << 5)
-#define PIIX4_OCW2_RNSEOI	(0x5 << 5)
-#define PIIX4_OCW2_RAEOIS	(0x4 << 5)
-#define PIIX4_OCW2_RAEOIC	(0x0 << 5)
-#define PIIX4_OCW2_RSEOI	(0x7 << 5)
-#define PIIX4_OCW2_SP		(0x6 << 5)
-#define PIIX4_OCW2_NOP		(0x2 << 5)
-
-#define PIIX4_OCW2_SEL		(0x0 << 3)
-
-#define PIIX4_OCW2_ILS_0	0
-#define PIIX4_OCW2_ILS_1	1
-#define PIIX4_OCW2_ILS_2	2
-#define PIIX4_OCW2_ILS_3	3
-#define PIIX4_OCW2_ILS_4	4
-#define PIIX4_OCW2_ILS_5	5
-#define PIIX4_OCW2_ILS_6	6
-#define PIIX4_OCW2_ILS_7	7
-#define PIIX4_OCW2_ILS_8	0
-#define PIIX4_OCW2_ILS_9	1
-#define PIIX4_OCW2_ILS_10	2
-#define PIIX4_OCW2_ILS_11	3
-#define PIIX4_OCW2_ILS_12	4
-#define PIIX4_OCW2_ILS_13	5
-#define PIIX4_OCW2_ILS_14	6
-#define PIIX4_OCW2_ILS_15	7
-
-#define PIIX4_OCW3_SEL		(0x1 << 3)
-
-#define PIIX4_OCW3_IRR		0x2
-#define PIIX4_OCW3_ISR		0x3
+/* IDE Timing */
+#define PIIX4_FUNC1_IDETIM_PRIMARY_LO		0x40
+#define PIIX4_FUNC1_IDETIM_PRIMARY_HI		0x41
+#define   PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN	(1 << 7)
+#define PIIX4_FUNC1_IDETIM_SECONDARY_LO		0x42
+#define PIIX4_FUNC1_IDETIM_SECONDARY_HI		0x43
+#define   PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN	(1 << 7)
 
 #endif /* __ASM_MIPS_BOARDS_PIIX4_H */
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 3b29079..e277bba 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -24,21 +24,21 @@
 #endif /* SMTC */
 #include <asm-generic/mm_hooks.h>
 
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
-
 #define TLBMISS_HANDLER_SETUP_PGD(pgd)					\
 do {									\
 	extern void tlbmiss_handler_setup_pgd(unsigned long);		\
 	tlbmiss_handler_setup_pgd((unsigned long)(pgd));		\
 } while (0)
 
+#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 #define TLBMISS_HANDLER_SETUP()						\
 	do {								\
 		TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir);		\
-		write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
+		write_c0_xcontext((unsigned long) smp_processor_id() <<	\
+						SMP_CPUID_REGSHIFT);	\
 	} while (0)
 
-#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
+#else /* !CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
 
 /*
  * For the fast tlb miss handlers, we keep a per cpu array of pointers
@@ -47,21 +47,11 @@
  */
 extern unsigned long pgd_current[];
 
-#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
-	pgd_current[smp_processor_id()] = (unsigned long)(pgd)
-
-#ifdef CONFIG_32BIT
 #define TLBMISS_HANDLER_SETUP()						\
-	write_c0_context((unsigned long) smp_processor_id() << 25);	\
+	write_c0_context((unsigned long) smp_processor_id() <<		\
+						SMP_CPUID_REGSHIFT);	\
 	back_to_back_c0_hazard();					\
 	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
-#endif
-#ifdef CONFIG_64BIT
-#define TLBMISS_HANDLER_SETUP()						\
-	write_c0_context((unsigned long) smp_processor_id() << 26);	\
-	back_to_back_c0_hazard();					\
-	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
-#endif
 #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/
 #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 5e6cd09..7bba9da 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -81,7 +81,6 @@
 
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
-#define user_stack_pointer(r) ((r)->regs[29])
 
 extern asmlinkage void syscall_trace_enter(struct pt_regs *regs);
 extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
@@ -100,4 +99,17 @@
 	(struct pt_regs *)((sp | (THREAD_SIZE - 1)) + 1 - 32) - 1;	\
 })
 
+/* Helpers for working with the user stack pointer */
+
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	return regs->regs[29];
+}
+
+static inline void user_stack_pointer_set(struct pt_regs *regs,
+	unsigned long val)
+{
+	regs->regs[29] = val;
+}
+
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index a0b2650..34d1a19 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -15,6 +15,7 @@
 #include <asm/asm.h>
 #include <asm/cacheops.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/mipsmtregs.h>
 
 /*
@@ -162,7 +163,15 @@
 static inline void flush_icache_line(unsigned long addr)
 {
 	__iflush_prologue
-	cache_op(Hit_Invalidate_I, addr);
+	switch (boot_cpu_type()) {
+	case CPU_LOONGSON2:
+		cache_op(Hit_Invalidate_I_Loongson23, addr);
+		break;
+
+	default:
+		cache_op(Hit_Invalidate_I, addr);
+		break;
+	}
 	__iflush_epilogue
 }
 
@@ -208,7 +217,15 @@
  */
 static inline void protected_flush_icache_line(unsigned long addr)
 {
-	protected_cache_op(Hit_Invalidate_I, addr);
+	switch (boot_cpu_type()) {
+	case CPU_LOONGSON2:
+		protected_cache_op(Hit_Invalidate_I_Loongson23, addr);
+		break;
+
+	default:
+		protected_cache_op(Hit_Invalidate_I, addr);
+		break;
+	}
 }
 
 /*
@@ -412,8 +429,8 @@
 __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
 
 /* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)	\
+static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
 						    unsigned long end)	\
 {									\
 	unsigned long lsize = cpu_##desc##_line_size();			\
@@ -432,13 +449,15 @@
 	__##pfx##flush_epilogue						\
 }
 
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson23, \
+	protected_, loongson23_)
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
 /* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
 
 #endif /* _ASM_R4KCACHE_H */
diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
index e26589e..d7bfdeb 100644
--- a/arch/mips/include/asm/setup.h
+++ b/arch/mips/include/asm/setup.h
@@ -5,6 +5,14 @@
 
 extern void setup_early_printk(void);
 
+#ifdef CONFIG_EARLY_PRINTK_8250
+extern void setup_8250_early_printk_port(unsigned long base,
+	unsigned int reg_shift, unsigned int timeout);
+#else
+static inline void setup_8250_early_printk_port(unsigned long base,
+	unsigned int reg_shift, unsigned int timeout) {}
+#endif
+
 extern void set_handler(unsigned long offset, void *addr, unsigned long len);
 extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
 
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 23fc95e..4857e2c 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -17,6 +17,7 @@
 #include <asm/asmmacro.h>
 #include <asm/mipsregs.h>
 #include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
 
 /*
  * For SMTC kernel, global IE should be left set, and interrupts
@@ -93,21 +94,8 @@
 		.endm
 
 #ifdef CONFIG_SMP
-#ifdef CONFIG_MIPS_MT_SMTC
-#define PTEBASE_SHIFT	19	/* TCBIND */
-#define CPU_ID_REG CP0_TCBIND
-#define CPU_ID_MFC0 mfc0
-#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
-#define PTEBASE_SHIFT	48	/* XCONTEXT */
-#define CPU_ID_REG CP0_XCONTEXT
-#define CPU_ID_MFC0 MFC0
-#else
-#define PTEBASE_SHIFT	23	/* CONTEXT */
-#define CPU_ID_REG CP0_CONTEXT
-#define CPU_ID_MFC0 MFC0
-#endif
 		.macro	get_saved_sp	/* SMP variation */
-		CPU_ID_MFC0	k0, CPU_ID_REG
+		ASM_CPUID_MFC0	k0, ASM_SMP_CPUID_REG
 #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
 		lui	k1, %hi(kernelsp)
 #else
@@ -117,17 +105,17 @@
 		daddiu	k1, %hi(kernelsp)
 		dsll	k1, 16
 #endif
-		LONG_SRL	k0, PTEBASE_SHIFT
+		LONG_SRL	k0, SMP_CPUID_PTRSHIFT
 		LONG_ADDU	k1, k0
 		LONG_L	k1, %lo(kernelsp)(k1)
 		.endm
 
 		.macro	set_saved_sp stackp temp temp2
-		CPU_ID_MFC0	\temp, CPU_ID_REG
-		LONG_SRL	\temp, PTEBASE_SHIFT
+		ASM_CPUID_MFC0	\temp, ASM_SMP_CPUID_REG
+		LONG_SRL	\temp, SMP_CPUID_PTRSHIFT
 		LONG_S	\stackp, kernelsp(\temp)
 		.endm
-#else
+#else /* !CONFIG_SMP */
 		.macro	get_saved_sp	/* Uniprocessor variation */
 #ifdef CONFIG_CPU_JUMP_WORKAROUNDS
 		/*
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
new file mode 100644
index 0000000..81c8913
--- /dev/null
+++ b/arch/mips/include/asm/syscall.h
@@ -0,0 +1,116 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ *
+ * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org>
+ */
+
+#ifndef __ASM_MIPS_SYSCALL_H
+#define __ASM_MIPS_SYSCALL_H
+
+#include <linux/audit.h>
+#include <linux/elf-em.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <asm/ptrace.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->regs[2];
+}
+
+static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
+	struct task_struct *task, struct pt_regs *regs, unsigned int n)
+{
+	unsigned long usp = regs->regs[29];
+
+	switch (n) {
+	case 0: case 1: case 2: case 3:
+		*arg = regs->regs[4 + n];
+
+		return 0;
+
+#ifdef CONFIG_32BIT
+	case 4: case 5: case 6: case 7:
+		return get_user(*arg, (int *)usp + 4 * n);
+#endif
+
+#ifdef CONFIG_64BIT
+	case 4: case 5: case 6: case 7:
+#ifdef CONFIG_MIPS32_O32
+		if (test_thread_flag(TIF_32BIT_REGS))
+			return get_user(*arg, (int *)usp + 4 * n);
+		else
+#endif
+			*arg = regs->regs[4 + n];
+
+		return 0;
+#endif
+
+	default:
+		BUG();
+	}
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[2];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		regs->regs[2] = -error;
+		regs->regs[7] = -1;
+	} else {
+		regs->regs[2] = val;
+		regs->regs[7] = 0;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	unsigned long arg;
+	int ret;
+
+	while (n--)
+		ret |= mips_get_syscall_arg(&arg, task, regs, i++);
+
+	/*
+	 * No way to communicate an error because this is a void function.
+	 */
+#if 0
+	return ret;
+#endif
+}
+
+extern const unsigned long sys_call_table[];
+extern const unsigned long sys32_call_table[];
+extern const unsigned long sysn32_call_table[];
+
+static inline int __syscall_get_arch(void)
+{
+	int arch = EM_MIPS;
+#ifdef CONFIG_64BIT
+	arch |=  __AUDIT_ARCH_64BIT;
+#endif
+#if defined(__LITTLE_ENDIAN)
+	arch |=  __AUDIT_ARCH_LE;
+#endif
+	return arch;
+}
+
+#endif	/* __ASM_MIPS_SYSCALL_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 61215a3..f9b24bf 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -116,6 +116,7 @@
 #define TIF_32BIT_ADDR		23	/* 32-bit address space (o32/n32) */
 #define TIF_FPUBOUND		24	/* thread bound to FPU-full CPU set */
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
+#define TIF_SYSCALL_TRACEPOINT	26	/* syscall tracepoint instrumentation */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -132,21 +133,54 @@
 #define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
+#define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 
 #define _TIF_WORK_SYSCALL_ENTRY	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\
-				 _TIF_SYSCALL_AUDIT)
+				 _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do in syscall_trace_leave() */
 #define _TIF_WORK_SYSCALL_EXIT	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\
-				 _TIF_SYSCALL_AUDIT)
+				 _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		\
 	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_NOTIFY_RESUME)
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(_TIF_NOHZ | _TIF_WORK_MASK |		\
-				 _TIF_WORK_SYSCALL_EXIT)
+				 _TIF_WORK_SYSCALL_EXIT |		\
+				 _TIF_SYSCALL_TRACEPOINT)
+
+/*
+ * We stash processor id into a COP0 register to retrieve it fast
+ * at kernel exception entry.
+ */
+#if defined(CONFIG_MIPS_MT_SMTC)
+#define SMP_CPUID_REG		2, 2	/* TCBIND */
+#define ASM_SMP_CPUID_REG	$2, 2
+#define SMP_CPUID_PTRSHIFT	19
+#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
+#define SMP_CPUID_REG		20, 0	/* XCONTEXT */
+#define ASM_SMP_CPUID_REG	$20
+#define SMP_CPUID_PTRSHIFT	48
+#else
+#define SMP_CPUID_REG		4, 0	/* CONTEXT */
+#define ASM_SMP_CPUID_REG	$4
+#define SMP_CPUID_PTRSHIFT	23
+#endif
+
+#ifdef CONFIG_64BIT
+#define SMP_CPUID_REGSHIFT	(SMP_CPUID_PTRSHIFT + 3)
+#else
+#define SMP_CPUID_REGSHIFT	(SMP_CPUID_PTRSHIFT + 2)
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#define ASM_CPUID_MFC0		mfc0
+#define UASM_i_CPUID_MFC0	uasm_i_mfc0
+#else
+#define ASM_CPUID_MFC0		MFC0
+#define UASM_i_CPUID_MFC0	UASM_i_MFC0
+#endif
 
 #endif /* __KERNEL__ */
-
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 2d7b9df..24f534a 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -75,7 +75,7 @@
 
 static inline int init_mips_clocksource(void)
 {
-#if defined(CONFIG_CSRC_R4K) && !defined(CONFIG_CSRC_GIC)
+#ifdef CONFIG_CSRC_R4K
 	return init_r4k_clocksource();
 #else
 	return 0;
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 63c9c88..4d3b928 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -14,6 +14,13 @@
 
 #include <uapi/asm/unistd.h>
 
+#ifdef CONFIG_MIPS32_N32
+#define NR_syscalls  (__NR_N32_Linux + __NR_N32_Linux_syscalls)
+#elif defined(CONFIG_64BIT)
+#define NR_syscalls  (__NR_64_Linux + __NR_64_Linux_syscalls)
+#else
+#define NR_syscalls  (__NR_O32_Linux + __NR_O32_Linux_syscalls)
+#endif
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index 88e292b..e811744 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -33,6 +33,8 @@
 #error _MIPS_SZLONG neither 32 nor 64
 #endif
 
+#define __ARCH_SIGSYS
+
 #include <asm-generic/siginfo.h>
 
 typedef struct siginfo {
@@ -97,6 +99,13 @@
 			__ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
 		} _sigpoll;
+
+		/* SIGSYS */
+		struct {
+			void __user *_call_addr; /* calling user insn */
+			int _syscall;	/* triggering system call number */
+			unsigned int _arch;	/* AUDIT_ARCH_* of syscall */
+		} _sigsys;
 	} _sifields;
 } siginfo_t;
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 423d871..1c1b717 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -26,7 +26,6 @@
 obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
 obj-$(CONFIG_CSRC_GIC)		+= csrc-gic.o
 obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
-obj-$(CONFIG_CSRC_POWERTV)	+= csrc-powertv.o
 obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
@@ -35,6 +34,7 @@
 obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o
 
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
 
 obj-$(CONFIG_CPU_R4K_FPU)	+= r4k_fpu.o r4k_switch.o
@@ -84,6 +84,7 @@
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_EARLY_PRINTK_8250)	+= early_printk_8250.o
 obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
 obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
 
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 5465dc1..c814287 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -376,13 +376,33 @@
 				__cpu_name[cpu] = "R4000PC";
 			}
 		} else {
+			int cca = read_c0_config() & CONF_CM_CMASK;
+			int mc;
+
+			/*
+			 * SC and MC versions can't be reliably told apart,
+			 * but only the latter support coherent caching
+			 * modes so assume the firmware has set the KSEG0
+			 * coherency attribute reasonably (if uncached, we
+			 * assume SC).
+			 */
+			switch (cca) {
+			case CONF_CM_CACHABLE_CE:
+			case CONF_CM_CACHABLE_COW:
+			case CONF_CM_CACHABLE_CUW:
+				mc = 1;
+				break;
+			default:
+				mc = 0;
+				break;
+			}
 			if ((c->processor_id & PRID_REV_MASK) >=
 			    PRID_REV_R4400) {
-				c->cputype = CPU_R4400SC;
-				__cpu_name[cpu] = "R4400SC";
+				c->cputype = mc ? CPU_R4400MC : CPU_R4400SC;
+				__cpu_name[cpu] = mc ? "R4400MC" : "R4400SC";
 			} else {
-				c->cputype = CPU_R4000SC;
-				__cpu_name[cpu] = "R4000SC";
+				c->cputype = mc ? CPU_R4000MC : CPU_R4000SC;
+				__cpu_name[cpu] = mc ? "R4000MC" : "R4000SC";
 			}
 		}
 
@@ -1079,8 +1099,8 @@
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	printk(KERN_INFO "CPU revision is: %08x (%s)\n",
-	       c->processor_id, cpu_name_string());
+	pr_info("CPU%d revision is: %08x (%s)\n",
+		smp_processor_id(), c->processor_id, cpu_name_string());
 	if (c->options & MIPS_CPU_FPU)
 		printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
 }
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
deleted file mode 100644
index abd99ea..0000000
--- a/arch/mips/kernel/csrc-powertv.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright (C) 2008 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-/*
- * The file comes from kernel/csrc-r4k.c
- */
-#include <linux/clocksource.h>
-#include <linux/init.h>
-
-#include <asm/time.h>			/* Not included in linux/time.h */
-
-#include <asm/mach-powertv/asic_regs.h>
-#include "powertv-clock.h"
-
-/* MIPS PLL Register Definitions */
-#define PLL_GET_M(x)		(((x) >> 8) & 0x000000FF)
-#define PLL_GET_N(x)		(((x) >> 16) & 0x000000FF)
-#define PLL_GET_P(x)		(((x) >> 24) & 0x00000007)
-
-/*
- * returns:  Clock frequency in kHz
- */
-unsigned int __init mips_get_pll_freq(void)
-{
-	unsigned int pll_reg, m, n, p;
-	unsigned int fin = 54000; /* Base frequency in kHz */
-	unsigned int fout;
-
-	/* Read PLL register setting */
-	pll_reg = asic_read(mips_pll_setup);
-	m = PLL_GET_M(pll_reg);
-	n = PLL_GET_N(pll_reg);
-	p = PLL_GET_P(pll_reg);
-	pr_info("MIPS PLL Register:0x%x	 M=%d  N=%d  P=%d\n", pll_reg, m, n, p);
-
-	/* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
-	fout = ((2 * n * fin) / (m * (0x01 << p)));
-
-	pr_info("MIPS Clock Freq=%d kHz\n", fout);
-
-	return fout;
-}
-
-static cycle_t c0_hpt_read(struct clocksource *cs)
-{
-	return read_c0_count();
-}
-
-static struct clocksource clocksource_mips = {
-	.name		= "powertv-counter",
-	.read		= c0_hpt_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init powertv_c0_hpt_clocksource_init(void)
-{
-	unsigned int pll_freq = mips_get_pll_freq();
-
-	pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000,
-		(pll_freq % 1000) * 100 / 1000);
-
-	mips_hpt_frequency = pll_freq / 2 * 1000;
-
-	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
-
-	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
-}
-
-/**
- * struct tim_c - free running counter
- * @hi: High 16 bits of the counter
- * @lo: Low 32 bits of the counter
- *
- * Lays out the structure of the free running counter in memory. This counter
- * increments at a rate of 27 MHz/8 on all platforms.
- */
-struct tim_c {
-	unsigned int hi;
-	unsigned int lo;
-};
-
-static struct tim_c *tim_c;
-
-static cycle_t tim_c_read(struct clocksource *cs)
-{
-	unsigned int hi;
-	unsigned int next_hi;
-	unsigned int lo;
-
-	hi = readl(&tim_c->hi);
-
-	for (;;) {
-		lo = readl(&tim_c->lo);
-		next_hi = readl(&tim_c->hi);
-		if (next_hi == hi)
-			break;
-		hi = next_hi;
-	}
-
-pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo);
-	return ((u64) hi << 32) | lo;
-}
-
-#define TIM_C_SIZE		48		/* # bits in the timer */
-
-static struct clocksource clocksource_tim_c = {
-	.name		= "powertv-tim_c",
-	.read		= tim_c_read,
-	.mask		= CLOCKSOURCE_MASK(TIM_C_SIZE),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/**
- * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
- *
- * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds.
- */
-static void __init powertv_tim_c_clocksource_init(void)
-{
-	const unsigned long	counts_per_second = 27000000 / 8;
-
-	clocksource_tim_c.rating = 200;
-
-	clocksource_register_hz(&clocksource_tim_c, counts_per_second);
-	tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
-}
-
-/**
- powertv_clocksource_init - initialize all clocksources
- */
-void __init powertv_clocksource_init(void)
-{
-	powertv_c0_hpt_clocksource_init();
-	powertv_tim_c_clocksource_init();
-}
diff --git a/arch/mips/kernel/early_printk_8250.c b/arch/mips/kernel/early_printk_8250.c
new file mode 100644
index 0000000..83cea37
--- /dev/null
+++ b/arch/mips/kernel/early_printk_8250.c
@@ -0,0 +1,66 @@
+/*
+ *  8250/16550-type serial ports prom_putchar()
+ *
+ *  Copyright (C) 2010  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+static void __iomem *serial8250_base;
+static unsigned int serial8250_reg_shift;
+static unsigned int serial8250_tx_timeout;
+
+void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
+				  unsigned int timeout)
+{
+	serial8250_base = (void __iomem *)base;
+	serial8250_reg_shift = reg_shift;
+	serial8250_tx_timeout = timeout;
+}
+
+static inline u8 serial_in(int offset)
+{
+	return readb(serial8250_base + (offset << serial8250_reg_shift));
+}
+
+static inline void serial_out(int offset, char value)
+{
+	writeb(value, serial8250_base + (offset << serial8250_reg_shift));
+}
+
+void prom_putchar(char c)
+{
+	unsigned int timeout;
+	int status, bits;
+
+	if (!serial8250_base)
+		return;
+
+	timeout = serial8250_tx_timeout;
+	bits = UART_LSR_TEMT | UART_LSR_THRE;
+
+	do {
+		status = serial_in(UART_LSR);
+
+		if (--timeout == 0)
+			break;
+	} while ((status & bits) != bits);
+
+	if (timeout)
+		serial_out(UART_TX, c);
+}
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index dba90ec..185ba25 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -11,11 +11,14 @@
 #include <linux/uaccess.h>
 #include <linux/init.h>
 #include <linux/ftrace.h>
+#include <linux/syscalls.h>
 
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/cacheflush.h>
+#include <asm/syscall.h>
 #include <asm/uasm.h>
+#include <asm/unistd.h>
 
 #include <asm-generic/sections.h>
 
@@ -364,3 +367,33 @@
 	WARN_ON(1);
 }
 #endif	/* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+#ifdef CONFIG_32BIT
+unsigned long __init arch_syscall_addr(int nr)
+{
+	return (unsigned long)sys_call_table[nr - __NR_O32_Linux];
+}
+#endif
+
+#ifdef CONFIG_64BIT
+
+unsigned long __init arch_syscall_addr(int nr)
+{
+#ifdef CONFIG_MIPS32_N32
+	if (nr >= __NR_N32_Linux && nr <= __NR_N32_Linux + __NR_N32_Linux_syscalls)
+		return (unsigned long)sysn32_call_table[nr - __NR_N32_Linux];
+#endif
+	if (nr >= __NR_64_Linux  && nr <= __NR_64_Linux + __NR_64_Linux_syscalls)
+		return (unsigned long)sys_call_table[nr - __NR_64_Linux];
+#ifdef CONFIG_MIPS32_O32
+	if (nr >= __NR_O32_Linux && nr <= __NR_O32_Linux + __NR_O32_Linux_syscalls)
+		return (unsigned long)sys32_call_table[nr - __NR_O32_Linux];
+#endif
+
+	return (unsigned long) &sys_ni_syscall;
+}
+#endif
+
+#endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 31fa856..47d7583 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -374,12 +374,20 @@
 NESTED(nmi_handler, PT_SIZE, sp)
 	.set	push
 	.set	noat
+	/*
+	 * Clear ERL - restore segment mapping
+	 * Clear BEV - required for page fault exception handler to work
+	 */
+	mfc0	k0, CP0_STATUS
+	ori     k0, k0, ST0_EXL
+	li	k1, ~(ST0_BEV | ST0_ERL)
+	and     k0, k0, k1
+	mtc0    k0, CP0_STATUS
+	_ehb
 	SAVE_ALL
 	move	a0, sp
 	jal	nmi_exception_handler
-	RESTORE_ALL
-	.set	mips3
-	eret
+	/* nmi_exception_handler never returns */
 	.set	pop
 	END(nmi_handler)
 
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 72ef2d2..e498f2b 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -150,7 +150,7 @@
 	domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
 				       &mips_cpu_intc_irq_domain_ops, NULL);
 	if (!domain)
-		panic("Failed to add irqdomain for MIPS CPU\n");
+		panic("Failed to add irqdomain for MIPS CPU");
 
 	return 0;
 }
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 977a623..2a52568 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -23,6 +23,7 @@
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/mm.h>
+#include <linux/numa.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
@@ -46,7 +47,7 @@
 void *module_alloc(unsigned long size)
 {
 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
-				GFP_KERNEL, PAGE_KERNEL, -1,
+				GFP_KERNEL, PAGE_KERNEL, NUMA_NO_NODE,
 				__builtin_return_address(0));
 }
 #endif
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 45f1ffc..24cdf64 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -971,11 +971,11 @@
 [C(LL)] = {
 	[C(OP_READ)] = {
 		[C(RESULT_ACCESS)]	= { 0x1c, CNTR_ODD, P },
-		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN | CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN, P },
 	},
 	[C(OP_WRITE)] = {
 		[C(RESULT_ACCESS)]	= { 0x1c, CNTR_ODD, P },
-		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN | CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN, P },
 	},
 },
 [C(ITLB)] = {
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 8ae1ebe..b52e1d2 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -16,16 +16,20 @@
  */
 #include <linux/compiler.h>
 #include <linux/context_tracking.h>
+#include <linux/elf.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
+#include <linux/regset.h>
 #include <linux/smp.h>
 #include <linux/user.h>
 #include <linux/security.h>
+#include <linux/tracehook.h>
 #include <linux/audit.h>
 #include <linux/seccomp.h>
+#include <linux/ftrace.h>
 
 #include <asm/byteorder.h>
 #include <asm/cpu.h>
@@ -35,10 +39,14 @@
 #include <asm/mipsmtregs.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/syscall.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 #include <asm/reg.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -255,6 +263,133 @@
 	return 0;
 }
 
+/* regset get/set implementations */
+
+static int gpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   regs, 0, sizeof(*regs));
+}
+
+static int gpr_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs newregs;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &newregs,
+				 0, sizeof(newregs));
+	if (ret)
+		return ret;
+
+	*task_pt_regs(target) = newregs;
+
+	return 0;
+}
+
+static int fpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.fpu,
+				   0, sizeof(elf_fpregset_t));
+	/* XXX fcr31  */
+}
+
+static int fpr_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.fpu,
+				  0, sizeof(elf_fpregset_t));
+	/* XXX fcr31  */
+}
+
+enum mips_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+};
+
+static const struct user_regset mips_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(unsigned int),
+		.align		= sizeof(unsigned int),
+		.get		= gpr_get,
+		.set		= gpr_set,
+	},
+	[REGSET_FPR] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= ELF_NFPREG,
+		.size		= sizeof(elf_fpreg_t),
+		.align		= sizeof(elf_fpreg_t),
+		.get		= fpr_get,
+		.set		= fpr_set,
+	},
+};
+
+static const struct user_regset_view user_mips_view = {
+	.name		= "mips",
+	.e_machine	= ELF_ARCH,
+	.ei_osabi	= ELF_OSABI,
+	.regsets	= mips_regsets,
+	.n		= ARRAY_SIZE(mips_regsets),
+};
+
+static const struct user_regset mips64_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(unsigned long),
+		.align		= sizeof(unsigned long),
+		.get		= gpr_get,
+		.set		= gpr_set,
+	},
+	[REGSET_FPR] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= ELF_NFPREG,
+		.size		= sizeof(elf_fpreg_t),
+		.align		= sizeof(elf_fpreg_t),
+		.get		= fpr_get,
+		.set		= fpr_set,
+	},
+};
+
+static const struct user_regset_view user_mips64_view = {
+	.name		= "mips",
+	.e_machine	= ELF_ARCH,
+	.ei_osabi	= ELF_OSABI,
+	.regsets	= mips64_regsets,
+	.n		= ARRAY_SIZE(mips_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+#ifdef CONFIG_32BIT
+	return &user_mips_view;
+#endif
+
+#ifdef CONFIG_MIPS32_O32
+		if (test_thread_flag(TIF_32BIT_REGS))
+			return &user_mips_view;
+#endif
+
+	return &user_mips64_view;
+}
+
 long arch_ptrace(struct task_struct *child, long request,
 		 unsigned long addr, unsigned long data)
 {
@@ -517,52 +652,27 @@
 	return ret;
 }
 
-static inline int audit_arch(void)
-{
-	int arch = EM_MIPS;
-#ifdef CONFIG_64BIT
-	arch |=	 __AUDIT_ARCH_64BIT;
-#endif
-#if defined(__LITTLE_ENDIAN)
-	arch |=	 __AUDIT_ARCH_LE;
-#endif
-	return arch;
-}
-
 /*
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
 asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 {
+	long ret = 0;
 	user_exit();
 
 	/* do the secure computing check first */
 	secure_computing_strict(regs->regs[2]);
 
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		ret = -1;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[2]);
 
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
-				 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-
-out:
-	audit_syscall_entry(audit_arch(), regs->regs[2],
+	audit_syscall_entry(__syscall_get_arch(),
+			    regs->regs[2],
 			    regs->regs[4], regs->regs[5],
 			    regs->regs[6], regs->regs[7]);
 }
@@ -582,26 +692,11 @@
 
 	audit_syscall_exit(regs);
 
-	if (!(current->ptrace & PT_PTRACED))
-		return;
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[2]);
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
-				 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
 
 	user_enter();
 }
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index e774bb1..e8e541b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -40,17 +40,58 @@
 	sw	t1, PT_EPC(sp)
 	beqz	t0, illegal_syscall
 
-	sll	t0, v0, 3
+	sll	t0, v0, 2
 	la	t1, sys_call_table
 	addu	t1, t0
 	lw	t2, (t1)		# syscall routine
-	lw	t3, 4(t1)		# >= 0 if we need stack arguments
 	beqz	t2, illegal_syscall
 
 	sw	a3, PT_R26(sp)		# save a3 for syscall restarting
-	bgez	t3, stackargs
 
-stack_done:
+	/*
+	 * More than four arguments.  Try to deal with it by copying the
+	 * stack arguments from the user stack to the kernel stack.
+	 * This Sucks (TM).
+	 */
+	lw	t0, PT_R29(sp)		# get old user stack pointer
+
+	/*
+	 * We intentionally keep the kernel stack a little below the top of
+	 * userspace so we don't have to do a slower byte accurate check here.
+	 */
+	lw	t5, TI_ADDR_LIMIT($28)
+	addu	t4, t0, 32
+	and	t5, t4
+	bltz	t5, bad_stack		# -> sp is bad
+
+	/*
+	 * Ok, copy the args from the luser stack to the kernel stack.
+	 * t3 is the precomputed number of instruction bytes needed to
+	 * load or store arguments 6-8.
+	 */
+
+	.set    push
+	.set    noreorder
+	.set	nomacro
+
+1:	lw	t5, 16(t0)		# argument #5 from usp
+4:	lw	t6, 20(t0)		# argument #6 from usp
+3:	lw	t7, 24(t0)		# argument #7 from usp
+2:	lw	t8, 28(t0)		# argument #8 from usp
+
+	sw	t5, 16(sp)		# argument #5 to ksp
+	sw	t6, 20(sp)		# argument #6 to ksp
+	sw	t7, 24(sp)		# argument #7 to ksp
+	sw	t8, 28(sp)		# argument #8 to ksp
+	.set	pop
+
+	.section __ex_table,"a"
+	PTR	1b,bad_stack
+	PTR	2b,bad_stack
+	PTR	3b,bad_stack
+	PTR	4b,bad_stack
+	.previous
+
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
@@ -102,66 +143,6 @@
 /* ------------------------------------------------------------------------ */
 
 	/*
-	 * More than four arguments.  Try to deal with it by copying the
-	 * stack arguments from the user stack to the kernel stack.
-	 * This Sucks (TM).
-	 */
-stackargs:
-	lw	t0, PT_R29(sp)		# get old user stack pointer
-
-	/*
-	 * We intentionally keep the kernel stack a little below the top of
-	 * userspace so we don't have to do a slower byte accurate check here.
-	 */
-	lw	t5, TI_ADDR_LIMIT($28)
-	addu	t4, t0, 32
-	and	t5, t4
-	bltz	t5, bad_stack		# -> sp is bad
-
-	/* Ok, copy the args from the luser stack to the kernel stack.
-	 * t3 is the precomputed number of instruction bytes needed to
-	 * load or store arguments 6-8.
-	 */
-
-	la	t1, 5f			# load up to 3 arguments
-	subu	t1, t3
-1:	lw	t5, 16(t0)		# argument #5 from usp
-	.set	push
-	.set	noreorder
-	.set	nomacro
-	jr	t1
-	 addiu	t1, 6f - 5f
-
-2:	lw	t8, 28(t0)		# argument #8 from usp
-3:	lw	t7, 24(t0)		# argument #7 from usp
-4:	lw	t6, 20(t0)		# argument #6 from usp
-5:	jr	t1
-	 sw	t5, 16(sp)		# argument #5 to ksp
-
-#ifdef CONFIG_CPU_MICROMIPS
-	sw	t8, 28(sp)		# argument #8 to ksp
-	nop
-	sw	t7, 24(sp)		# argument #7 to ksp
-	nop
-	sw	t6, 20(sp)		# argument #6 to ksp
-	nop
-#else
-	sw	t8, 28(sp)		# argument #8 to ksp
-	sw	t7, 24(sp)		# argument #7 to ksp
-	sw	t6, 20(sp)		# argument #6 to ksp
-#endif
-6:	j	stack_done		# go back
-	 nop
-	.set	pop
-
-	.section __ex_table,"a"
-	PTR	1b,bad_stack
-	PTR	2b,bad_stack
-	PTR	3b,bad_stack
-	PTR	4b,bad_stack
-	.previous
-
-	/*
 	 * The stackpointer for a call with more than 4 arguments is bad.
 	 * We probably should handle this case a bit more drastic.
 	 */
@@ -187,7 +168,7 @@
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
 	beqz	t0, einval		# do not recurse
-	sll	t1, t0, 3
+	sll	t1, t0, 2
 	beqz	v0, einval
 	lw	t2, sys_call_table(t1)		# syscall routine
 
@@ -218,260 +199,248 @@
 	jr	ra
 	END(sys_syscall)
 
-	.macro	fifty ptr, nargs, from=1, to=50
-	sys	\ptr		\nargs
-	.if	\to-\from
-	fifty	\ptr,\nargs,"(\from+1)",\to
-	.endif
-	.endm
-
-	.macro	mille ptr, nargs, from=1, to=20
-	fifty	\ptr,\nargs
-	.if	\to-\from
-	mille	\ptr,\nargs,"(\from+1)",\to
-	.endif
-	.endm
-
-	.macro	syscalltable
-	sys	sys_syscall		8	/* 4000 */
-	sys	sys_exit		1
-	sys	__sys_fork		0
-	sys	sys_read		3
-	sys	sys_write		3
-	sys	sys_open		3	/* 4005 */
-	sys	sys_close		1
-	sys	sys_waitpid		3
-	sys	sys_creat		2
-	sys	sys_link		2
-	sys	sys_unlink		1	/* 4010 */
-	sys	sys_execve		0
-	sys	sys_chdir		1
-	sys	sys_time		1
-	sys	sys_mknod		3
-	sys	sys_chmod		2	/* 4015 */
-	sys	sys_lchown		3
-	sys	sys_ni_syscall		0
-	sys	sys_ni_syscall		0	/* was sys_stat */
-	sys	sys_lseek		3
-	sys	sys_getpid		0	/* 4020 */
-	sys	sys_mount		5
-	sys	sys_oldumount		1
-	sys	sys_setuid		1
-	sys	sys_getuid		0
-	sys	sys_stime		1	/* 4025 */
-	sys	sys_ptrace		4
-	sys	sys_alarm		1
-	sys	sys_ni_syscall		0	/* was sys_fstat */
-	sys	sys_pause		0
-	sys	sys_utime		2	/* 4030 */
-	sys	sys_ni_syscall		0
-	sys	sys_ni_syscall		0
-	sys	sys_access		2
-	sys	sys_nice		1
-	sys	sys_ni_syscall		0	/* 4035 */
-	sys	sys_sync		0
-	sys	sys_kill		2
-	sys	sys_rename		2
-	sys	sys_mkdir		2
-	sys	sys_rmdir		1	/* 4040 */
-	sys	sys_dup			1
-	sys	sysm_pipe		0
-	sys	sys_times		1
-	sys	sys_ni_syscall		0
-	sys	sys_brk			1	/* 4045 */
-	sys	sys_setgid		1
-	sys	sys_getgid		0
-	sys	sys_ni_syscall		0	/* was signal(2) */
-	sys	sys_geteuid		0
-	sys	sys_getegid		0	/* 4050 */
-	sys	sys_acct		1
-	sys	sys_umount		2
-	sys	sys_ni_syscall		0
-	sys	sys_ioctl		3
-	sys	sys_fcntl		3	/* 4055 */
-	sys	sys_ni_syscall		2
-	sys	sys_setpgid		2
-	sys	sys_ni_syscall		0
-	sys	sys_olduname		1
-	sys	sys_umask		1	/* 4060 */
-	sys	sys_chroot		1
-	sys	sys_ustat		2
-	sys	sys_dup2		2
-	sys	sys_getppid		0
-	sys	sys_getpgrp		0	/* 4065 */
-	sys	sys_setsid		0
-	sys	sys_sigaction		3
-	sys	sys_sgetmask		0
-	sys	sys_ssetmask		1
-	sys	sys_setreuid		2	/* 4070 */
-	sys	sys_setregid		2
-	sys	sys_sigsuspend		0
-	sys	sys_sigpending		1
-	sys	sys_sethostname		2
-	sys	sys_setrlimit		2	/* 4075 */
-	sys	sys_getrlimit		2
-	sys	sys_getrusage		2
-	sys	sys_gettimeofday	2
-	sys	sys_settimeofday	2
-	sys	sys_getgroups		2	/* 4080 */
-	sys	sys_setgroups		2
-	sys	sys_ni_syscall		0	/* old_select */
-	sys	sys_symlink		2
-	sys	sys_ni_syscall		0	/* was sys_lstat */
-	sys	sys_readlink		3	/* 4085 */
-	sys	sys_uselib		1
-	sys	sys_swapon		2
-	sys	sys_reboot		3
-	sys	sys_old_readdir		3
-	sys	sys_mips_mmap		6	/* 4090 */
-	sys	sys_munmap		2
-	sys	sys_truncate		2
-	sys	sys_ftruncate		2
-	sys	sys_fchmod		2
-	sys	sys_fchown		3	/* 4095 */
-	sys	sys_getpriority		2
-	sys	sys_setpriority		3
-	sys	sys_ni_syscall		0
-	sys	sys_statfs		2
-	sys	sys_fstatfs		2	/* 4100 */
-	sys	sys_ni_syscall		0	/* was ioperm(2) */
-	sys	sys_socketcall		2
-	sys	sys_syslog		3
-	sys	sys_setitimer		3
-	sys	sys_getitimer		2	/* 4105 */
-	sys	sys_newstat		2
-	sys	sys_newlstat		2
-	sys	sys_newfstat		2
-	sys	sys_uname		1
-	sys	sys_ni_syscall		0	/* 4110 was iopl(2) */
-	sys	sys_vhangup		0
-	sys	sys_ni_syscall		0	/* was sys_idle() */
-	sys	sys_ni_syscall		0	/* was sys_vm86 */
-	sys	sys_wait4		4
-	sys	sys_swapoff		1	/* 4115 */
-	sys	sys_sysinfo		1
-	sys	sys_ipc			6
-	sys	sys_fsync		1
-	sys	sys_sigreturn		0
-	sys	__sys_clone		6	/* 4120 */
-	sys	sys_setdomainname	2
-	sys	sys_newuname		1
-	sys	sys_ni_syscall		0	/* sys_modify_ldt */
-	sys	sys_adjtimex		1
-	sys	sys_mprotect		3	/* 4125 */
-	sys	sys_sigprocmask		3
-	sys	sys_ni_syscall		0	/* was create_module */
-	sys	sys_init_module		5
-	sys	sys_delete_module	1
-	sys	sys_ni_syscall		0	/* 4130 was get_kernel_syms */
-	sys	sys_quotactl		4
-	sys	sys_getpgid		1
-	sys	sys_fchdir		1
-	sys	sys_bdflush		2
-	sys	sys_sysfs		3	/* 4135 */
-	sys	sys_personality		1
-	sys	sys_ni_syscall		0	/* for afs_syscall */
-	sys	sys_setfsuid		1
-	sys	sys_setfsgid		1
-	sys	sys_llseek		5	/* 4140 */
-	sys	sys_getdents		3
-	sys	sys_select		5
-	sys	sys_flock		2
-	sys	sys_msync		3
-	sys	sys_readv		3	/* 4145 */
-	sys	sys_writev		3
-	sys	sys_cacheflush		3
-	sys	sys_cachectl		3
-	sys	sys_sysmips		4
-	sys	sys_ni_syscall		0	/* 4150 */
-	sys	sys_getsid		1
-	sys	sys_fdatasync		1
-	sys	sys_sysctl		1
-	sys	sys_mlock		2
-	sys	sys_munlock		2	/* 4155 */
-	sys	sys_mlockall		1
-	sys	sys_munlockall		0
-	sys	sys_sched_setparam	2
-	sys	sys_sched_getparam	2
-	sys	sys_sched_setscheduler	3	/* 4160 */
-	sys	sys_sched_getscheduler	1
-	sys	sys_sched_yield		0
-	sys	sys_sched_get_priority_max 1
-	sys	sys_sched_get_priority_min 1
-	sys	sys_sched_rr_get_interval 2	/* 4165 */
-	sys	sys_nanosleep,		2
-	sys	sys_mremap,		5
-	sys	sys_accept		3
-	sys	sys_bind		3
-	sys	sys_connect		3	/* 4170 */
-	sys	sys_getpeername		3
-	sys	sys_getsockname		3
-	sys	sys_getsockopt		5
-	sys	sys_listen		2
-	sys	sys_recv		4	/* 4175 */
-	sys	sys_recvfrom		6
-	sys	sys_recvmsg		3
-	sys	sys_send		4
-	sys	sys_sendmsg		3
-	sys	sys_sendto		6	/* 4180 */
-	sys	sys_setsockopt		5
-	sys	sys_shutdown		2
-	sys	sys_socket		3
-	sys	sys_socketpair		4
-	sys	sys_setresuid		3	/* 4185 */
-	sys	sys_getresuid		3
-	sys	sys_ni_syscall		0	/* was sys_query_module */
-	sys	sys_poll		3
-	sys	sys_ni_syscall		0	/* was nfsservctl */
-	sys	sys_setresgid		3	/* 4190 */
-	sys	sys_getresgid		3
-	sys	sys_prctl		5
-	sys	sys_rt_sigreturn	0
-	sys	sys_rt_sigaction	4
-	sys	sys_rt_sigprocmask	4	/* 4195 */
-	sys	sys_rt_sigpending	2
-	sys	sys_rt_sigtimedwait	4
-	sys	sys_rt_sigqueueinfo	3
-	sys	sys_rt_sigsuspend	0
-	sys	sys_pread64		6	/* 4200 */
-	sys	sys_pwrite64		6
-	sys	sys_chown		3
-	sys	sys_getcwd		2
-	sys	sys_capget		2
-	sys	sys_capset		2	/* 4205 */
-	sys	sys_sigaltstack		0
-	sys	sys_sendfile		4
-	sys	sys_ni_syscall		0
-	sys	sys_ni_syscall		0
-	sys	sys_mips_mmap2		6	/* 4210 */
-	sys	sys_truncate64		4
-	sys	sys_ftruncate64		4
-	sys	sys_stat64		2
-	sys	sys_lstat64		2
-	sys	sys_fstat64		2	/* 4215 */
-	sys	sys_pivot_root		2
-	sys	sys_mincore		3
-	sys	sys_madvise		3
-	sys	sys_getdents64		3
-	sys	sys_fcntl64		3	/* 4220 */
-	sys	sys_ni_syscall		0
-	sys	sys_gettid		0
-	sys	sys_readahead		5
-	sys	sys_setxattr		5
-	sys	sys_lsetxattr		5	/* 4225 */
-	sys	sys_fsetxattr		5
-	sys	sys_getxattr		4
-	sys	sys_lgetxattr		4
-	sys	sys_fgetxattr		4
-	sys	sys_listxattr		3	/* 4230 */
-	sys	sys_llistxattr		3
-	sys	sys_flistxattr		3
-	sys	sys_removexattr		2
-	sys	sys_lremovexattr	2
-	sys	sys_fremovexattr	2	/* 4235 */
-	sys	sys_tkill		2
-	sys	sys_sendfile64		5
-	sys	sys_futex		6
+	.align	2
+	.type	sys_call_table, @object
+EXPORT(sys_call_table)
+	PTR	sys_syscall			/* 4000 */
+	PTR	sys_exit
+	PTR	__sys_fork
+	PTR	sys_read
+	PTR	sys_write
+	PTR	sys_open			/* 4005 */
+	PTR	sys_close
+	PTR	sys_waitpid
+	PTR	sys_creat
+	PTR	sys_link
+	PTR	sys_unlink			/* 4010 */
+	PTR	sys_execve
+	PTR	sys_chdir
+	PTR	sys_time
+	PTR	sys_mknod
+	PTR	sys_chmod			/* 4015 */
+	PTR	sys_lchown
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was sys_stat */
+	PTR	sys_lseek
+	PTR	sys_getpid			/* 4020 */
+	PTR	sys_mount
+	PTR	sys_oldumount
+	PTR	sys_setuid
+	PTR	sys_getuid
+	PTR	sys_stime			/* 4025 */
+	PTR	sys_ptrace
+	PTR	sys_alarm
+	PTR	sys_ni_syscall			/* was sys_fstat */
+	PTR	sys_pause
+	PTR	sys_utime			/* 4030 */
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_access
+	PTR	sys_nice
+	PTR	sys_ni_syscall			/* 4035 */
+	PTR	sys_sync
+	PTR	sys_kill
+	PTR	sys_rename
+	PTR	sys_mkdir
+	PTR	sys_rmdir			/* 4040 */
+	PTR	sys_dup
+	PTR	sysm_pipe
+	PTR	sys_times
+	PTR	sys_ni_syscall
+	PTR	sys_brk				/* 4045 */
+	PTR	sys_setgid
+	PTR	sys_getgid
+	PTR	sys_ni_syscall			/* was signal(2) */
+	PTR	sys_geteuid
+	PTR	sys_getegid			/* 4050 */
+	PTR	sys_acct
+	PTR	sys_umount
+	PTR	sys_ni_syscall
+	PTR	sys_ioctl
+	PTR	sys_fcntl			/* 4055 */
+	PTR	sys_ni_syscall
+	PTR	sys_setpgid
+	PTR	sys_ni_syscall
+	PTR	sys_olduname
+	PTR	sys_umask			/* 4060 */
+	PTR	sys_chroot
+	PTR	sys_ustat
+	PTR	sys_dup2
+	PTR	sys_getppid
+	PTR	sys_getpgrp			/* 4065 */
+	PTR	sys_setsid
+	PTR	sys_sigaction
+	PTR	sys_sgetmask
+	PTR	sys_ssetmask
+	PTR	sys_setreuid			/* 4070 */
+	PTR	sys_setregid
+	PTR	sys_sigsuspend
+	PTR	sys_sigpending
+	PTR	sys_sethostname
+	PTR	sys_setrlimit			/* 4075 */
+	PTR	sys_getrlimit
+	PTR	sys_getrusage
+	PTR	sys_gettimeofday
+	PTR	sys_settimeofday
+	PTR	sys_getgroups			/* 4080 */
+	PTR	sys_setgroups
+	PTR	sys_ni_syscall			/* old_select */
+	PTR	sys_symlink
+	PTR	sys_ni_syscall			/* was sys_lstat */
+	PTR	sys_readlink			/* 4085 */
+	PTR	sys_uselib
+	PTR	sys_swapon
+	PTR	sys_reboot
+	PTR	sys_old_readdir
+	PTR	sys_mips_mmap			/* 4090 */
+	PTR	sys_munmap
+	PTR	sys_truncate
+	PTR	sys_ftruncate
+	PTR	sys_fchmod
+	PTR	sys_fchown			/* 4095 */
+	PTR	sys_getpriority
+	PTR	sys_setpriority
+	PTR	sys_ni_syscall
+	PTR	sys_statfs
+	PTR	sys_fstatfs			/* 4100 */
+	PTR	sys_ni_syscall			/* was ioperm(2) */
+	PTR	sys_socketcall
+	PTR	sys_syslog
+	PTR	sys_setitimer
+	PTR	sys_getitimer			/* 4105 */
+	PTR	sys_newstat
+	PTR	sys_newlstat
+	PTR	sys_newfstat
+	PTR	sys_uname
+	PTR	sys_ni_syscall			/* 4110 was iopl(2) */
+	PTR	sys_vhangup
+	PTR	sys_ni_syscall			/* was sys_idle() */
+	PTR	sys_ni_syscall			/* was sys_vm86 */
+	PTR	sys_wait4
+	PTR	sys_swapoff			/* 4115 */
+	PTR	sys_sysinfo
+	PTR	sys_ipc
+	PTR	sys_fsync
+	PTR	sys_sigreturn
+	PTR	__sys_clone			/* 4120 */
+	PTR	sys_setdomainname
+	PTR	sys_newuname
+	PTR	sys_ni_syscall			/* sys_modify_ldt */
+	PTR	sys_adjtimex
+	PTR	sys_mprotect			/* 4125 */
+	PTR	sys_sigprocmask
+	PTR	sys_ni_syscall			/* was create_module */
+	PTR	sys_init_module
+	PTR	sys_delete_module
+	PTR	sys_ni_syscall			/* 4130 was get_kernel_syms */
+	PTR	sys_quotactl
+	PTR	sys_getpgid
+	PTR	sys_fchdir
+	PTR	sys_bdflush
+	PTR	sys_sysfs			/* 4135 */
+	PTR	sys_personality
+	PTR	sys_ni_syscall			/* for afs_syscall */
+	PTR	sys_setfsuid
+	PTR	sys_setfsgid
+	PTR	sys_llseek			/* 4140 */
+	PTR	sys_getdents
+	PTR	sys_select
+	PTR	sys_flock
+	PTR	sys_msync
+	PTR	sys_readv			/* 4145 */
+	PTR	sys_writev
+	PTR	sys_cacheflush
+	PTR	sys_cachectl
+	PTR	sys_sysmips
+	PTR	sys_ni_syscall			/* 4150 */
+	PTR	sys_getsid
+	PTR	sys_fdatasync
+	PTR	sys_sysctl
+	PTR	sys_mlock
+	PTR	sys_munlock			/* 4155 */
+	PTR	sys_mlockall
+	PTR	sys_munlockall
+	PTR	sys_sched_setparam
+	PTR	sys_sched_getparam
+	PTR	sys_sched_setscheduler		/* 4160 */
+	PTR	sys_sched_getscheduler
+	PTR	sys_sched_yield
+	PTR	sys_sched_get_priority_max
+	PTR	sys_sched_get_priority_min
+	PTR	sys_sched_rr_get_interval	/* 4165 */
+	PTR	sys_nanosleep
+	PTR	sys_mremap
+	PTR	sys_accept
+	PTR	sys_bind
+	PTR	sys_connect			/* 4170 */
+	PTR	sys_getpeername
+	PTR	sys_getsockname
+	PTR	sys_getsockopt
+	PTR	sys_listen
+	PTR	sys_recv			/* 4175 */
+	PTR	sys_recvfrom
+	PTR	sys_recvmsg
+	PTR	sys_send
+	PTR	sys_sendmsg
+	PTR	sys_sendto			/* 4180 */
+	PTR	sys_setsockopt
+	PTR	sys_shutdown
+	PTR	sys_socket
+	PTR	sys_socketpair
+	PTR	sys_setresuid			/* 4185 */
+	PTR	sys_getresuid
+	PTR	sys_ni_syscall			/* was sys_query_module */
+	PTR	sys_poll
+	PTR	sys_ni_syscall			/* was nfsservctl */
+	PTR	sys_setresgid			/* 4190 */
+	PTR	sys_getresgid
+	PTR	sys_prctl
+	PTR	sys_rt_sigreturn
+	PTR	sys_rt_sigaction
+	PTR	sys_rt_sigprocmask		/* 4195 */
+	PTR	sys_rt_sigpending
+	PTR	sys_rt_sigtimedwait
+	PTR	sys_rt_sigqueueinfo
+	PTR	sys_rt_sigsuspend
+	PTR	sys_pread64			/* 4200 */
+	PTR	sys_pwrite64
+	PTR	sys_chown
+	PTR	sys_getcwd
+	PTR	sys_capget
+	PTR	sys_capset			/* 4205 */
+	PTR	sys_sigaltstack
+	PTR	sys_sendfile
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_mips_mmap2			/* 4210 */
+	PTR	sys_truncate64
+	PTR	sys_ftruncate64
+	PTR	sys_stat64
+	PTR	sys_lstat64
+	PTR	sys_fstat64			/* 4215 */
+	PTR	sys_pivot_root
+	PTR	sys_mincore
+	PTR	sys_madvise
+	PTR	sys_getdents64
+	PTR	sys_fcntl64			/* 4220 */
+	PTR	sys_ni_syscall
+	PTR	sys_gettid
+	PTR	sys_readahead
+	PTR	sys_setxattr
+	PTR	sys_lsetxattr			/* 4225 */
+	PTR	sys_fsetxattr
+	PTR	sys_getxattr
+	PTR	sys_lgetxattr
+	PTR	sys_fgetxattr
+	PTR	sys_listxattr			/* 4230 */
+	PTR	sys_llistxattr
+	PTR	sys_flistxattr
+	PTR	sys_removexattr
+	PTR	sys_lremovexattr
+	PTR	sys_fremovexattr		/* 4235 */
+	PTR	sys_tkill
+	PTR	sys_sendfile64
+	PTR	sys_futex
 #ifdef CONFIG_MIPS_MT_FPAFF
 	/*
 	 * For FPU affinity scheduling on MIPS MT processors, we need to
@@ -480,132 +449,117 @@
 	 * these hooks for the 32-bit kernel - there is no MIPS64 MT processor
 	 * atm.
 	 */
-	sys	mipsmt_sys_sched_setaffinity	3
-	sys	mipsmt_sys_sched_getaffinity	3
+	PTR	mipsmt_sys_sched_setaffinity
+	PTR	mipsmt_sys_sched_getaffinity
 #else
-	sys	sys_sched_setaffinity	3
-	sys	sys_sched_getaffinity	3	/* 4240 */
+	PTR	sys_sched_setaffinity
+	PTR	sys_sched_getaffinity		/* 4240 */
 #endif /* CONFIG_MIPS_MT_FPAFF */
-	sys	sys_io_setup		2
-	sys	sys_io_destroy		1
-	sys	sys_io_getevents	5
-	sys	sys_io_submit		3
-	sys	sys_io_cancel		3	/* 4245 */
-	sys	sys_exit_group		1
-	sys	sys_lookup_dcookie	4
-	sys	sys_epoll_create	1
-	sys	sys_epoll_ctl		4
-	sys	sys_epoll_wait		4	/* 4250 */
-	sys	sys_remap_file_pages	5
-	sys	sys_set_tid_address	1
-	sys	sys_restart_syscall	0
-	sys	sys_fadvise64_64	7
-	sys	sys_statfs64		3	/* 4255 */
-	sys	sys_fstatfs64		2
-	sys	sys_timer_create	3
-	sys	sys_timer_settime	4
-	sys	sys_timer_gettime	2
-	sys	sys_timer_getoverrun	1	/* 4260 */
-	sys	sys_timer_delete	1
-	sys	sys_clock_settime	2
-	sys	sys_clock_gettime	2
-	sys	sys_clock_getres	2
-	sys	sys_clock_nanosleep	4	/* 4265 */
-	sys	sys_tgkill		3
-	sys	sys_utimes		2
-	sys	sys_mbind		4
-	sys	sys_ni_syscall		0	/* sys_get_mempolicy */
-	sys	sys_ni_syscall		0	/* 4270 sys_set_mempolicy */
-	sys	sys_mq_open		4
-	sys	sys_mq_unlink		1
-	sys	sys_mq_timedsend	5
-	sys	sys_mq_timedreceive	5
-	sys	sys_mq_notify		2	/* 4275 */
-	sys	sys_mq_getsetattr	3
-	sys	sys_ni_syscall		0	/* sys_vserver */
-	sys	sys_waitid		5
-	sys	sys_ni_syscall		0	/* available, was setaltroot */
-	sys	sys_add_key		5	/* 4280 */
-	sys	sys_request_key		4
-	sys	sys_keyctl		5
-	sys	sys_set_thread_area	1
-	sys	sys_inotify_init	0
-	sys	sys_inotify_add_watch	3	/* 4285 */
-	sys	sys_inotify_rm_watch	2
-	sys	sys_migrate_pages	4
-	sys	sys_openat		4
-	sys	sys_mkdirat		3
-	sys	sys_mknodat		4	/* 4290 */
-	sys	sys_fchownat		5
-	sys	sys_futimesat		3
-	sys	sys_fstatat64		4
-	sys	sys_unlinkat		3
-	sys	sys_renameat		4	/* 4295 */
-	sys	sys_linkat		5
-	sys	sys_symlinkat		3
-	sys	sys_readlinkat		4
-	sys	sys_fchmodat		3
-	sys	sys_faccessat		3	/* 4300 */
-	sys	sys_pselect6		6
-	sys	sys_ppoll		5
-	sys	sys_unshare		1
-	sys	sys_splice		6
-	sys	sys_sync_file_range	7	/* 4305 */
-	sys	sys_tee			4
-	sys	sys_vmsplice		4
-	sys	sys_move_pages		6
-	sys	sys_set_robust_list	2
-	sys	sys_get_robust_list	3	/* 4310 */
-	sys	sys_kexec_load		4
-	sys	sys_getcpu		3
-	sys	sys_epoll_pwait		6
-	sys	sys_ioprio_set		3
-	sys	sys_ioprio_get		2	/* 4315 */
-	sys	sys_utimensat		4
-	sys	sys_signalfd		3
-	sys	sys_ni_syscall		0	/* was timerfd */
-	sys	sys_eventfd		1
-	sys	sys_fallocate		6	/* 4320 */
-	sys	sys_timerfd_create	2
-	sys	sys_timerfd_gettime	2
-	sys	sys_timerfd_settime	4
-	sys	sys_signalfd4		4
-	sys	sys_eventfd2		2	/* 4325 */
-	sys	sys_epoll_create1	1
-	sys	sys_dup3		3
-	sys	sys_pipe2		2
-	sys	sys_inotify_init1	1
-	sys	sys_preadv		6	/* 4330 */
-	sys	sys_pwritev		6
-	sys	sys_rt_tgsigqueueinfo	4
-	sys	sys_perf_event_open	5
-	sys	sys_accept4		4
-	sys	sys_recvmmsg		5	/* 4335 */
-	sys	sys_fanotify_init	2
-	sys	sys_fanotify_mark	6
-	sys	sys_prlimit64		4
-	sys	sys_name_to_handle_at	5
-	sys	sys_open_by_handle_at	3	/* 4340 */
-	sys	sys_clock_adjtime	2
-	sys	sys_syncfs		1
-	sys	sys_sendmmsg		4
-	sys	sys_setns		2
-	sys	sys_process_vm_readv	6	/* 4345 */
-	sys	sys_process_vm_writev	6
-	sys	sys_kcmp		5
-	sys	sys_finit_module	3
-	.endm
-
-	/* We pre-compute the number of _instruction_ bytes needed to
-	   load or store the arguments 6-8. Negative values are ignored. */
-
-	.macro	sys function, nargs
-	PTR	\function
-	LONG	(\nargs << 2) - (5 << 2)
-	.endm
-
-	.align	3
-	.type	sys_call_table,@object
-EXPORT(sys_call_table)
-	syscalltable
-	.size	sys_call_table, . - sys_call_table
+	PTR	sys_io_setup
+	PTR	sys_io_destroy
+	PTR	sys_io_getevents
+	PTR	sys_io_submit
+	PTR	sys_io_cancel			/* 4245 */
+	PTR	sys_exit_group
+	PTR	sys_lookup_dcookie
+	PTR	sys_epoll_create
+	PTR	sys_epoll_ctl
+	PTR	sys_epoll_wait			/* 4250 */
+	PTR	sys_remap_file_pages
+	PTR	sys_set_tid_address
+	PTR	sys_restart_syscall
+	PTR	sys_fadvise64_64
+	PTR	sys_statfs64			/* 4255 */
+	PTR	sys_fstatfs64
+	PTR	sys_timer_create
+	PTR	sys_timer_settime
+	PTR	sys_timer_gettime
+	PTR	sys_timer_getoverrun		/* 4260 */
+	PTR	sys_timer_delete
+	PTR	sys_clock_settime
+	PTR	sys_clock_gettime
+	PTR	sys_clock_getres
+	PTR	sys_clock_nanosleep		/* 4265 */
+	PTR	sys_tgkill
+	PTR	sys_utimes
+	PTR	sys_mbind
+	PTR	sys_ni_syscall			/* sys_get_mempolicy */
+	PTR	sys_ni_syscall			/* 4270 sys_set_mempolicy */
+	PTR	sys_mq_open
+	PTR	sys_mq_unlink
+	PTR	sys_mq_timedsend
+	PTR	sys_mq_timedreceive
+	PTR	sys_mq_notify			/* 4275 */
+	PTR	sys_mq_getsetattr
+	PTR	sys_ni_syscall			/* sys_vserver */
+	PTR	sys_waitid
+	PTR	sys_ni_syscall			/* available, was setaltroot */
+	PTR	sys_add_key			/* 4280 */
+	PTR	sys_request_key
+	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch		/* 4285 */
+	PTR	sys_inotify_rm_watch
+	PTR	sys_migrate_pages
+	PTR	sys_openat
+	PTR	sys_mkdirat
+	PTR	sys_mknodat			/* 4290 */
+	PTR	sys_fchownat
+	PTR	sys_futimesat
+	PTR	sys_fstatat64
+	PTR	sys_unlinkat
+	PTR	sys_renameat			/* 4295 */
+	PTR	sys_linkat
+	PTR	sys_symlinkat
+	PTR	sys_readlinkat
+	PTR	sys_fchmodat
+	PTR	sys_faccessat			/* 4300 */
+	PTR	sys_pselect6
+	PTR	sys_ppoll
+	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range		/* 4305 */
+	PTR	sys_tee
+	PTR	sys_vmsplice
+	PTR	sys_move_pages
+	PTR	sys_set_robust_list
+	PTR	sys_get_robust_list		/* 4310 */
+	PTR	sys_kexec_load
+	PTR	sys_getcpu
+	PTR	sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get			/* 4315 */
+	PTR	sys_utimensat
+	PTR	sys_signalfd
+	PTR	sys_ni_syscall			/* was timerfd */
+	PTR	sys_eventfd
+	PTR	sys_fallocate			/* 4320 */
+	PTR	sys_timerfd_create
+	PTR	sys_timerfd_gettime
+	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
+	PTR	sys_preadv			/* 4330 */
+	PTR	sys_pwritev
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_event_open
+	PTR	sys_accept4
+	PTR	sys_recvmmsg			/* 4335 */
+	PTR	sys_fanotify_init
+	PTR	sys_fanotify_mark
+	PTR	sys_prlimit64
+	PTR	sys_name_to_handle_at
+	PTR	sys_open_by_handle_at		/* 4340 */
+	PTR	sys_clock_adjtime
+	PTR	sys_syncfs
+	PTR	sys_sendmmsg
+	PTR	sys_setns
+	PTR	sys_process_vm_readv		/* 4345 */
+	PTR	sys_process_vm_writev
+	PTR	sys_kcmp
+	PTR	sys_finit_module
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index be6627e..57e3742 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -114,7 +114,8 @@
 	END(handle_sys64)
 
 	.align	3
-sys_call_table:
+	.type	sys_call_table, @object
+EXPORT(sys_call_table)
 	PTR	sys_read			/* 5000 */
 	PTR	sys_write
 	PTR	sys_open
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index cab1507..2f48f59 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -103,6 +103,7 @@
 
 	END(handle_sysn32)
 
+	.type	sysn32_call_table, @object
 EXPORT(sysn32_call_table)
 	PTR	sys_read			/* 6000 */
 	PTR	sys_write
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 37605dc..f1acdb4 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -53,7 +53,7 @@
 	sll	a3, a3, 0
 
 	dsll	t0, v0, 3		# offset into table
-	ld	t2, (sys_call_table - (__NR_O32_Linux * 8))(t0)
+	ld	t2, (sys32_call_table - (__NR_O32_Linux * 8))(t0)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
@@ -168,7 +168,7 @@
 	beqz	t0, einval		# do not recurse
 	dsll	t1, t0, 3
 	beqz	v0, einval
-	ld	t2, sys_call_table(t1)		# syscall routine
+	ld	t2, sys32_call_table(t1)		# syscall routine
 
 	move	a0, a1			# shift argument registers
 	move	a1, a2
@@ -190,8 +190,8 @@
 	END(sys32_syscall)
 
 	.align	3
-	.type	sys_call_table,@object
-sys_call_table:
+	.type	sys32_call_table,@object
+EXPORT(sys32_call_table)
 	PTR	sys32_syscall			/* 4000 */
 	PTR	sys_exit
 	PTR	__sys_fork
@@ -541,4 +541,4 @@
 	PTR	compat_sys_process_vm_writev
 	PTR	sys_kcmp
 	PTR	sys_finit_module
-	.size	sys_call_table,.-sys_call_table
+	.size	sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index c538d6e..a842154 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -300,12 +300,13 @@
 	int i;
 
 	/*
-	 * Init any data related to initrd. It's a nop if INITRD is
-	 * not selected. Once that done we can determine the low bound
-	 * of usable memory.
+	 * Sanity check any INITRD first. We don't take it into account
+	 * for bootmem setup initially, rely on the end-of-kernel-code
+	 * as our memory range starting point. Once bootmem is inited we
+	 * will reserve the area used for the initrd.
 	 */
-	reserved_end = max(init_initrd(),
-			   (unsigned long) PFN_UP(__pa_symbol(&_end)));
+	init_initrd();
+	reserved_end = (unsigned long) PFN_UP(__pa_symbol(&_end));
 
 	/*
 	 * max_low_pfn is not a number of pages. The number of pages
@@ -362,6 +363,14 @@
 		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 	}
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	/*
+	 * mapstart should be after initrd_end
+	 */
+	if (initrd_end)
+		mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
+#endif
+
 	/*
 	 * Initialize the boot-time allocator with low memory only.
 	 */
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 126da74..2362665 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -136,10 +136,10 @@
 {
 	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
 			"smp_ipi0", NULL))
-		panic("Can't request IPI0 interrupt\n");
+		panic("Can't request IPI0 interrupt");
 	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
 			"smp_ipi1", NULL))
-		panic("Can't request IPI1 interrupt\n");
+		panic("Can't request IPI1 interrupt");
 }
 
 /*
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 5c208ed..0a022ee 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -150,7 +150,6 @@
 void __irq_entry smp_call_function_interrupt(void)
 {
 	irq_enter();
-	generic_smp_call_function_single_interrupt();
 	generic_smp_call_function_interrupt();
 	irq_exit();
 }
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 524841f..f9c8746 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -330,6 +330,7 @@
 void show_registers(struct pt_regs *regs)
 {
 	const int field = 2 * sizeof(unsigned long);
+	mm_segment_t old_fs = get_fs();
 
 	__show_regs(regs);
 	print_modules();
@@ -344,9 +345,13 @@
 			printk("*HwTLS: %0*lx\n", field, tls);
 	}
 
+	if (!user_mode(regs))
+		/* Necessary for getting the correct stack content */
+		set_fs(KERNEL_DS);
 	show_stacktrace(current, regs);
 	show_code((unsigned int __user *) regs->cp0_epc);
 	printk("\n");
+	set_fs(old_fs);
 }
 
 static int regs_to_trapnr(struct pt_regs *regs)
@@ -366,7 +371,8 @@
 
 	oops_enter();
 
-	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
+	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs),
+		       SIGSEGV) == NOTIFY_STOP)
 		sig = 0;
 
 	console_verbose();
@@ -457,8 +463,8 @@
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
-	if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs), SIGBUS)
-	    == NOTIFY_STOP)
+	if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs),
+		       SIGBUS) == NOTIFY_STOP)
 		goto out;
 
 	die_if_kernel("Oops", regs);
@@ -727,8 +733,8 @@
 	siginfo_t info = {0};
 
 	prev_state = exception_enter();
-	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
-	    == NOTIFY_STOP)
+	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs),
+		       SIGFPE) == NOTIFY_STOP)
 		goto out;
 	die_if_kernel("FP exception in kernel code", regs);
 
@@ -798,7 +804,8 @@
 		return;
 #endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 
-	if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+	if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs),
+		       SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/*
@@ -892,12 +899,14 @@
 	 */
 	switch (bcode) {
 	case BRK_KPROBE_BP:
-		if (notify_die(DIE_BREAK, "debug", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+		if (notify_die(DIE_BREAK, "debug", regs, bcode,
+			       regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
 			goto out;
 		else
 			break;
 	case BRK_KPROBE_SSTEPBP:
-		if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+		if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode,
+			       regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
 			goto out;
 		else
 			break;
@@ -961,8 +970,8 @@
 	int status = -1;
 
 	prev_state = exception_enter();
-	if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs), SIGILL)
-	    == NOTIFY_STOP)
+	if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs),
+		       SIGILL) == NOTIFY_STOP)
 		goto out;
 
 	die_if_kernel("Reserved instruction in kernel code", regs);
@@ -1488,10 +1497,14 @@
 
 void __noreturn nmi_exception_handler(struct pt_regs *regs)
 {
+	char str[100];
+
 	raw_notifier_call_chain(&nmi_chain, 0, regs);
 	bust_spinlocks(1);
-	printk("NMI taken!!!!\n");
-	die("NMI", regs);
+	snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n",
+		 smp_processor_id(), regs->cp0_epc);
+	regs->cp0_epc = read_c0_errorepc();
+	die(str, regs);
 }
 
 #define VECTORSPACING 0x100	/* for EI/VI mode */
@@ -1554,7 +1567,6 @@
 	unsigned char *b;
 
 	BUG_ON(!cpu_has_veic && !cpu_has_vint);
-	BUG_ON((n < 0) && (n > 9));
 
 	if (addr == NULL) {
 		handler = (unsigned long) do_default_vi;
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index eb3e186..85685e1 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -390,7 +390,7 @@
 		ret = of_irq_to_resource_table(eiu_node,
 						ltq_eiu_irq, exin_avail);
 		if (ret != exin_avail)
-			panic("failed to load external irq resources\n");
+			panic("failed to load external irq resources");
 
 		if (request_mem_region(res.start, resource_size(&res),
 							res.name) < 0)
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index c24924f..51804b1 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -128,7 +128,7 @@
 	do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits));
 
 	if (!retry)
-		panic("activating PMU module failed!\n");
+		panic("activating PMU module failed!");
 
 	return 0;
 }
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index bc6f96f..62ffd20 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -346,14 +346,8 @@
 
 static inline void local_r4k___flush_cache_all(void * args)
 {
-#if defined(CONFIG_CPU_LOONGSON2)
-	r4k_blast_scache();
-	return;
-#endif
-	r4k_blast_dcache();
-	r4k_blast_icache();
-
 	switch (current_cpu_type()) {
+	case CPU_LOONGSON2:
 	case CPU_R4000SC:
 	case CPU_R4000MC:
 	case CPU_R4400SC:
@@ -361,7 +355,18 @@
 	case CPU_R10000:
 	case CPU_R12000:
 	case CPU_R14000:
+		/*
+		 * These caches are inclusive caches, that is, if something
+		 * is not cached in the S-cache, we know it also won't be
+		 * in one of the primary caches.
+		 */
 		r4k_blast_scache();
+		break;
+
+	default:
+		r4k_blast_dcache();
+		r4k_blast_icache();
+		break;
 	}
 }
 
@@ -572,8 +577,17 @@
 
 	if (end - start > icache_size)
 		r4k_blast_icache();
-	else
-		protected_blast_icache_range(start, end);
+	else {
+		switch (boot_cpu_type()) {
+		case CPU_LOONGSON2:
+			protected_blast_icache_range(start, end);
+			break;
+
+		default:
+			protected_loongson23_blast_icache_range(start, end);
+			break;
+		}
+	}
 }
 
 static inline void local_r4k_flush_icache_range_ipi(void *args)
@@ -1109,15 +1123,14 @@
 	case CPU_ALCHEMY:
 		c->icache.flags |= MIPS_CACHE_IC_F_DC;
 		break;
-	}
 
-#ifdef	CONFIG_CPU_LOONGSON2
-	/*
-	 * LOONGSON2 has 4 way icache, but when using indexed cache op,
-	 * one op will act on all 4 ways
-	 */
-	c->icache.ways = 1;
-#endif
+	case CPU_LOONGSON2:
+		/*
+		 * LOONGSON2 has 4 way icache, but when using indexed cache op,
+		 * one op will act on all 4 ways
+		 */
+		c->icache.ways = 1;
+	}
 
 	printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
 	       icache_size >> 10,
@@ -1193,7 +1206,6 @@
 	return 1;
 }
 
-#if defined(CONFIG_CPU_LOONGSON2)
 static void __init loongson2_sc_init(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -1209,7 +1221,6 @@
 
 	c->options |= MIPS_CPU_INCLUSIVE_CACHES;
 }
-#endif
 
 extern int r5k_sc_init(void);
 extern int rm7k_sc_init(void);
@@ -1259,11 +1270,10 @@
 #endif
 		return;
 
-#if defined(CONFIG_CPU_LOONGSON2)
 	case CPU_LOONGSON2:
 		loongson2_sc_init();
 		return;
-#endif
+
 	case CPU_XLP:
 		/* don't need to worry about L2, fully coherent */
 		return;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 5f8b955..2e94185 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -297,7 +297,6 @@
 static void mips_dma_sync_single_for_device(struct device *dev,
 	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
 {
-	plat_extra_sync_for_device(dev);
 	if (!plat_device_is_coherent(dev))
 		__dma_sync(dma_addr_to_page(dev, dma_handle),
 			   dma_handle & ~PAGE_MASK, size, direction);
@@ -327,7 +326,7 @@
 
 int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return plat_dma_mapping_error(dev, dma_addr);
+	return 0;
 }
 
 int mips_dma_supported(struct device *dev, u64 mask)
@@ -340,7 +339,6 @@
 {
 	BUG_ON(direction == DMA_NONE);
 
-	plat_extra_sync_for_device(dev);
 	if (!plat_device_is_coherent(dev))
 		__dma_sync_virtual(vaddr, size, direction);
 }
diff --git a/arch/mips/mm/tlb-funcs.S b/arch/mips/mm/tlb-funcs.S
index 79bca31..30a494d 100644
--- a/arch/mips/mm/tlb-funcs.S
+++ b/arch/mips/mm/tlb-funcs.S
@@ -16,12 +16,10 @@
 
 #define FASTPATH_SIZE	128
 
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 LEAF(tlbmiss_handler_setup_pgd)
 	.space		16 * 4
 END(tlbmiss_handler_setup_pgd)
 EXPORT(tlbmiss_handler_setup_pgd_end)
-#endif
 
 LEAF(handle_tlbm)
 	.space		FASTPATH_SIZE * 4
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index bb3a5f64..da3b0b9 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -52,21 +52,26 @@
 
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-#if defined(CONFIG_CPU_LOONGSON2)
 /*
  * LOONGSON2 has a 4 entry itlb which is a subset of dtlb,
  * unfortrunately, itlb is not totally transparent to software.
  */
-#define FLUSH_ITLB write_c0_diag(4);
+static inline void flush_itlb(void)
+{
+	switch (current_cpu_type()) {
+	case CPU_LOONGSON2:
+		write_c0_diag(4);
+		break;
+	default:
+		break;
+	}
+}
 
-#define FLUSH_ITLB_VM(vma) { if ((vma)->vm_flags & VM_EXEC)  write_c0_diag(4); }
-
-#else
-
-#define FLUSH_ITLB
-#define FLUSH_ITLB_VM(vma)
-
-#endif
+static inline void flush_itlb_vm(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_EXEC)
+		flush_itlb();
+}
 
 void local_flush_tlb_all(void)
 {
@@ -93,7 +98,7 @@
 	}
 	tlbw_use_hazard();
 	write_c0_entryhi(old_ctx);
-	FLUSH_ITLB;
+	flush_itlb();
 	EXIT_CRITICAL(flags);
 }
 EXPORT_SYMBOL(local_flush_tlb_all);
@@ -155,7 +160,7 @@
 		} else {
 			drop_mmu_context(mm, cpu);
 		}
-		FLUSH_ITLB;
+		flush_itlb();
 		EXIT_CRITICAL(flags);
 	}
 }
@@ -197,7 +202,7 @@
 	} else {
 		local_flush_tlb_all();
 	}
-	FLUSH_ITLB;
+	flush_itlb();
 	EXIT_CRITICAL(flags);
 }
 
@@ -230,7 +235,7 @@
 
 	finish:
 		write_c0_entryhi(oldpid);
-		FLUSH_ITLB_VM(vma);
+		flush_itlb_vm(vma);
 		EXIT_CRITICAL(flags);
 	}
 }
@@ -262,7 +267,7 @@
 		tlbw_use_hazard();
 	}
 	write_c0_entryhi(oldpid);
-	FLUSH_ITLB;
+	flush_itlb();
 	EXIT_CRITICAL(flags);
 }
 
@@ -335,7 +340,7 @@
 			tlb_write_indexed();
 	}
 	tlbw_use_hazard();
-	FLUSH_ITLB_VM(vma);
+	flush_itlb_vm(vma);
 	EXIT_CRITICAL(flags);
 }
 
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 9bb3a93..183f2b5 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -340,10 +340,6 @@
 {
 	struct work_registers r;
 
-	int smp_processor_id_reg;
-	int smp_processor_id_sel;
-	int smp_processor_id_shift;
-
 	if (scratch_reg >= 0) {
 		/* Save in CPU local C0_KScratch? */
 		UASM_i_MTC0(p, 1, c0_kscratch(), scratch_reg);
@@ -354,25 +350,9 @@
 	}
 
 	if (num_possible_cpus() > 1) {
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
-		smp_processor_id_shift = 51;
-		smp_processor_id_reg = 20; /* XContext */
-		smp_processor_id_sel = 0;
-#else
-# ifdef CONFIG_32BIT
-		smp_processor_id_shift = 25;
-		smp_processor_id_reg = 4; /* Context */
-		smp_processor_id_sel = 0;
-# endif
-# ifdef CONFIG_64BIT
-		smp_processor_id_shift = 26;
-		smp_processor_id_reg = 4; /* Context */
-		smp_processor_id_sel = 0;
-# endif
-#endif
 		/* Get smp_processor_id */
-		UASM_i_MFC0(p, K0, smp_processor_id_reg, smp_processor_id_sel);
-		UASM_i_SRL_SAFE(p, K0, K0, smp_processor_id_shift);
+		UASM_i_CPUID_MFC0(p, K0, SMP_CPUID_REG);
+		UASM_i_SRL_SAFE(p, K0, K0, SMP_CPUID_REGSHIFT);
 
 		/* handler_reg_save index in K0 */
 		UASM_i_SLL(p, K0, K0, ilog2(sizeof(struct tlb_reg_save)));
@@ -819,11 +799,11 @@
 	}
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 	if (pgd_reg != -1) {
 		/* pgd is in pgd_reg */
 		UASM_i_MFC0(p, ptr, c0_kscratch(), pgd_reg);
 	} else {
+#if defined(CONFIG_MIPS_PGD_C0_CONTEXT)
 		/*
 		 * &pgd << 11 stored in CONTEXT [23..63].
 		 */
@@ -835,30 +815,18 @@
 		/* 1 0	1 0 1  << 6  xkphys cached */
 		uasm_i_ori(p, ptr, ptr, 0x540);
 		uasm_i_drotr(p, ptr, ptr, 11);
-	}
 #elif defined(CONFIG_SMP)
-# ifdef	 CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC uses TCBind value as "CPU" index
-	 */
-	uasm_i_mfc0(p, ptr, C0_TCBIND);
-	uasm_i_dsrl_safe(p, ptr, ptr, 19);
-# else
-	/*
-	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
-	 * stored in CONTEXT.
-	 */
-	uasm_i_dmfc0(p, ptr, C0_CONTEXT);
-	uasm_i_dsrl_safe(p, ptr, ptr, 23);
-# endif
-	UASM_i_LA_mostly(p, tmp, pgdc);
-	uasm_i_daddu(p, ptr, ptr, tmp);
-	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
-	uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
+		UASM_i_CPUID_MFC0(p, ptr, SMP_CPUID_REG);
+		uasm_i_dsrl_safe(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
+		UASM_i_LA_mostly(p, tmp, pgdc);
+		uasm_i_daddu(p, ptr, ptr, tmp);
+		uasm_i_dmfc0(p, tmp, C0_BADVADDR);
+		uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
 #else
-	UASM_i_LA_mostly(p, ptr, pgdc);
-	uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
+		UASM_i_LA_mostly(p, ptr, pgdc);
+		uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
 #endif
+	}
 
 	uasm_l_vmalloc_done(l, *p);
 
@@ -953,31 +921,25 @@
 static void __maybe_unused
 build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
 {
-	long pgdc = (long)pgd_current;
+	if (pgd_reg != -1) {
+		/* pgd is in pgd_reg */
+		uasm_i_mfc0(p, ptr, c0_kscratch(), pgd_reg);
+		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+	} else {
+		long pgdc = (long)pgd_current;
 
-	/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
+		/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
 #ifdef CONFIG_SMP
-#ifdef	CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC uses TCBind value as "CPU" index
-	 */
-	uasm_i_mfc0(p, ptr, C0_TCBIND);
-	UASM_i_LA_mostly(p, tmp, pgdc);
-	uasm_i_srl(p, ptr, ptr, 19);
+		uasm_i_mfc0(p, ptr, SMP_CPUID_REG);
+		UASM_i_LA_mostly(p, tmp, pgdc);
+		uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
+		uasm_i_addu(p, ptr, tmp, ptr);
 #else
-	/*
-	 * smp_processor_id() << 2 is stored in CONTEXT.
-	 */
-	uasm_i_mfc0(p, ptr, C0_CONTEXT);
-	UASM_i_LA_mostly(p, tmp, pgdc);
-	uasm_i_srl(p, ptr, ptr, 23);
+		UASM_i_LA_mostly(p, ptr, pgdc);
 #endif
-	uasm_i_addu(p, ptr, tmp, ptr);
-#else
-	UASM_i_LA_mostly(p, ptr, pgdc);
-#endif
-	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-	uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr);
+		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+		uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr);
+	}
 	uasm_i_srl(p, tmp, tmp, PGDIR_SHIFT); /* get pgd only bits */
 	uasm_i_sll(p, tmp, tmp, PGD_T_LOG2);
 	uasm_i_addu(p, ptr, ptr, tmp); /* add in pgd offset */
@@ -1349,95 +1311,100 @@
 	 * need three, with the second nop'ed and the third being
 	 * unused.
 	 */
-	/* Loongson2 ebase is different than r4k, we have more space */
-#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
-	if ((p - tlb_handler) > 64)
-		panic("TLB refill handler space exceeded");
-#else
-	if (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 1)
-	    || (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 3)
-		&& uasm_insn_has_bdelay(relocs,
-					tlb_handler + MIPS64_REFILL_INSNS - 3)))
-		panic("TLB refill handler space exceeded");
-#endif
-
-	/*
-	 * Now fold the handler in the TLB refill handler space.
-	 */
-#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
-	f = final_handler;
-	/* Simplest case, just copy the handler. */
-	uasm_copy_handler(relocs, labels, tlb_handler, p, f);
-	final_len = p - tlb_handler;
-#else /* CONFIG_64BIT */
-	f = final_handler + MIPS64_REFILL_INSNS;
-	if ((p - tlb_handler) <= MIPS64_REFILL_INSNS) {
-		/* Just copy the handler. */
-		uasm_copy_handler(relocs, labels, tlb_handler, p, f);
-		final_len = p - tlb_handler;
-	} else {
+	switch (boot_cpu_type()) {
+	default:
+		if (sizeof(long) == 4) {
+	case CPU_LOONGSON2:
+		/* Loongson2 ebase is different than r4k, we have more space */
+			if ((p - tlb_handler) > 64)
+				panic("TLB refill handler space exceeded");
+			/*
+			 * Now fold the handler in the TLB refill handler space.
+			 */
+			f = final_handler;
+			/* Simplest case, just copy the handler. */
+			uasm_copy_handler(relocs, labels, tlb_handler, p, f);
+			final_len = p - tlb_handler;
+			break;
+		} else {
+			if (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 1)
+			    || (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 3)
+				&& uasm_insn_has_bdelay(relocs,
+							tlb_handler + MIPS64_REFILL_INSNS - 3)))
+				panic("TLB refill handler space exceeded");
+			/*
+			 * Now fold the handler in the TLB refill handler space.
+			 */
+			f = final_handler + MIPS64_REFILL_INSNS;
+			if ((p - tlb_handler) <= MIPS64_REFILL_INSNS) {
+				/* Just copy the handler. */
+				uasm_copy_handler(relocs, labels, tlb_handler, p, f);
+				final_len = p - tlb_handler;
+			} else {
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-		const enum label_id ls = label_tlb_huge_update;
+				const enum label_id ls = label_tlb_huge_update;
 #else
-		const enum label_id ls = label_vmalloc;
+				const enum label_id ls = label_vmalloc;
 #endif
-		u32 *split;
-		int ov = 0;
-		int i;
+				u32 *split;
+				int ov = 0;
+				int i;
 
-		for (i = 0; i < ARRAY_SIZE(labels) && labels[i].lab != ls; i++)
-			;
-		BUG_ON(i == ARRAY_SIZE(labels));
-		split = labels[i].addr;
+				for (i = 0; i < ARRAY_SIZE(labels) && labels[i].lab != ls; i++)
+					;
+				BUG_ON(i == ARRAY_SIZE(labels));
+				split = labels[i].addr;
 
-		/*
-		 * See if we have overflown one way or the other.
-		 */
-		if (split > tlb_handler + MIPS64_REFILL_INSNS ||
-		    split < p - MIPS64_REFILL_INSNS)
-			ov = 1;
+				/*
+				 * See if we have overflown one way or the other.
+				 */
+				if (split > tlb_handler + MIPS64_REFILL_INSNS ||
+				    split < p - MIPS64_REFILL_INSNS)
+					ov = 1;
 
-		if (ov) {
-			/*
-			 * Split two instructions before the end.  One
-			 * for the branch and one for the instruction
-			 * in the delay slot.
-			 */
-			split = tlb_handler + MIPS64_REFILL_INSNS - 2;
+				if (ov) {
+					/*
+					 * Split two instructions before the end.  One
+					 * for the branch and one for the instruction
+					 * in the delay slot.
+					 */
+					split = tlb_handler + MIPS64_REFILL_INSNS - 2;
 
-			/*
-			 * If the branch would fall in a delay slot,
-			 * we must back up an additional instruction
-			 * so that it is no longer in a delay slot.
-			 */
-			if (uasm_insn_has_bdelay(relocs, split - 1))
-				split--;
-		}
-		/* Copy first part of the handler. */
-		uasm_copy_handler(relocs, labels, tlb_handler, split, f);
-		f += split - tlb_handler;
+					/*
+					 * If the branch would fall in a delay slot,
+					 * we must back up an additional instruction
+					 * so that it is no longer in a delay slot.
+					 */
+					if (uasm_insn_has_bdelay(relocs, split - 1))
+						split--;
+				}
+				/* Copy first part of the handler. */
+				uasm_copy_handler(relocs, labels, tlb_handler, split, f);
+				f += split - tlb_handler;
 
-		if (ov) {
-			/* Insert branch. */
-			uasm_l_split(&l, final_handler);
-			uasm_il_b(&f, &r, label_split);
-			if (uasm_insn_has_bdelay(relocs, split))
-				uasm_i_nop(&f);
-			else {
-				uasm_copy_handler(relocs, labels,
-						  split, split + 1, f);
-				uasm_move_labels(labels, f, f + 1, -1);
-				f++;
-				split++;
+				if (ov) {
+					/* Insert branch. */
+					uasm_l_split(&l, final_handler);
+					uasm_il_b(&f, &r, label_split);
+					if (uasm_insn_has_bdelay(relocs, split))
+						uasm_i_nop(&f);
+					else {
+						uasm_copy_handler(relocs, labels,
+								  split, split + 1, f);
+						uasm_move_labels(labels, f, f + 1, -1);
+						f++;
+						split++;
+					}
+				}
+
+				/* Copy the rest of the handler. */
+				uasm_copy_handler(relocs, labels, split, p, final_handler);
+				final_len = (f - (final_handler + MIPS64_REFILL_INSNS)) +
+					    (p - split);
 			}
 		}
-
-		/* Copy the rest of the handler. */
-		uasm_copy_handler(relocs, labels, split, p, final_handler);
-		final_len = (f - (final_handler + MIPS64_REFILL_INSNS)) +
-			    (p - split);
+		break;
 	}
-#endif /* CONFIG_64BIT */
 
 	uasm_resolve_relocs(relocs, labels);
 	pr_debug("Wrote TLB refill handler (%u instructions).\n",
@@ -1451,28 +1418,30 @@
 extern u32 handle_tlbl[], handle_tlbl_end[];
 extern u32 handle_tlbs[], handle_tlbs_end[];
 extern u32 handle_tlbm[], handle_tlbm_end[];
-
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 extern u32 tlbmiss_handler_setup_pgd[], tlbmiss_handler_setup_pgd_end[];
 
-static void build_r4000_setup_pgd(void)
+static void build_setup_pgd(void)
 {
 	const int a0 = 4;
-	const int a1 = 5;
+	const int __maybe_unused a1 = 5;
+	const int __maybe_unused a2 = 6;
 	u32 *p = tlbmiss_handler_setup_pgd;
 	const int tlbmiss_handler_setup_pgd_size =
 		tlbmiss_handler_setup_pgd_end - tlbmiss_handler_setup_pgd;
-	struct uasm_label *l = labels;
-	struct uasm_reloc *r = relocs;
+#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
+	long pgdc = (long)pgd_current;
+#endif
 
 	memset(tlbmiss_handler_setup_pgd, 0, tlbmiss_handler_setup_pgd_size *
 					sizeof(tlbmiss_handler_setup_pgd[0]));
 	memset(labels, 0, sizeof(labels));
 	memset(relocs, 0, sizeof(relocs));
-
 	pgd_reg = allocate_kscratch();
-
+#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 	if (pgd_reg == -1) {
+		struct uasm_label *l = labels;
+		struct uasm_reloc *r = relocs;
+
 		/* PGD << 11 in c0_Context */
 		/*
 		 * If it is a ckseg0 address, convert to a physical
@@ -1494,6 +1463,26 @@
 		uasm_i_jr(&p, 31);
 		UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
 	}
+#else
+#ifdef CONFIG_SMP
+	/* Save PGD to pgd_current[smp_processor_id()] */
+	UASM_i_CPUID_MFC0(&p, a1, SMP_CPUID_REG);
+	UASM_i_SRL_SAFE(&p, a1, a1, SMP_CPUID_PTRSHIFT);
+	UASM_i_LA_mostly(&p, a2, pgdc);
+	UASM_i_ADDU(&p, a2, a2, a1);
+	UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2);
+#else
+	UASM_i_LA_mostly(&p, a2, pgdc);
+	UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2);
+#endif /* SMP */
+	uasm_i_jr(&p, 31);
+
+	/* if pgd_reg is allocated, save PGD also to scratch register */
+	if (pgd_reg != -1)
+		UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
+	else
+		uasm_i_nop(&p);
+#endif
 	if (p >= tlbmiss_handler_setup_pgd_end)
 		panic("tlbmiss_handler_setup_pgd space exceeded");
 
@@ -1504,7 +1493,6 @@
 	dump_handler("tlbmiss_handler", tlbmiss_handler_setup_pgd,
 					tlbmiss_handler_setup_pgd_size);
 }
-#endif
 
 static void
 iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
@@ -2197,10 +2185,8 @@
 			   (unsigned long)handle_tlbs_end);
 	local_flush_icache_range((unsigned long)handle_tlbm,
 			   (unsigned long)handle_tlbm_end);
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 	local_flush_icache_range((unsigned long)tlbmiss_handler_setup_pgd,
 			   (unsigned long)tlbmiss_handler_setup_pgd_end);
-#endif
 }
 
 void build_tlb_refill_handler(void)
@@ -2232,6 +2218,7 @@
 		if (!run_once) {
 			if (!cpu_has_local_ebase)
 				build_r3000_tlb_refill_handler();
+			build_setup_pgd();
 			build_r3000_tlb_load_handler();
 			build_r3000_tlb_store_handler();
 			build_r3000_tlb_modify_handler();
@@ -2255,9 +2242,7 @@
 	default:
 		if (!run_once) {
 			scratch_reg = allocate_kscratch();
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
-			build_r4000_setup_pgd();
-#endif
+			build_setup_pgd();
 			build_r4000_tlb_load_handler();
 			build_r4000_tlb_store_handler();
 			build_r4000_tlb_modify_handler();
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c69da37..0892575 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -37,7 +37,6 @@
 #include <asm/irq_regs.h>
 #include <asm/mips-boards/malta.h>
 #include <asm/mips-boards/maltaint.h>
-#include <asm/mips-boards/piix4.h>
 #include <asm/gt64120.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/msc01_pci.h>
@@ -473,7 +472,7 @@
 {
 	int cpu;
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
 		fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
 		fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
 	}
@@ -574,8 +573,9 @@
 		/* FIXME */
 		int i;
 #if defined(CONFIG_MIPS_MT_SMP)
-		gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
-		gic_resched_int_base = gic_call_int_base - NR_CPUS;
+		gic_call_int_base = GIC_NUM_INTRS -
+			(NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids;
+		gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
 		fill_ipi_map();
 #endif
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
@@ -599,7 +599,7 @@
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < NR_CPUS; i++) {
+		for (i = 0; i < nr_cpu_ids; i++) {
 			arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
 					 GIC_RESCHED_INT(i), &irq_resched);
 			arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index 6f8feb9..c0eded0 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -245,7 +245,7 @@
 	return threadmode;
 
 unsupp:
-	panic("Unsupported CPU mask %lx\n",
+	panic("Unsupported CPU mask %lx",
 		(unsigned long)cpumask_bits(wakeup_mask)[0]);
 	return 0;
 }
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index 07ada7f..df36e23 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -1,5 +1,6 @@
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <asm/mips-boards/piix4.h>
 
 /* PCI interrupt pins */
 #define PCIA		1
@@ -53,7 +54,8 @@
 static void malta_piix_func0_fixup(struct pci_dev *pdev)
 {
 	unsigned char reg_val;
-	static int piixirqmap[16] = {  /* PIIX PIRQC[A:D] irq mappings */
+	/* PIIX PIRQC[A:D] irq mappings */
+	static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = {
 		0,  0,	0,  3,
 		4,  5,	6,  7,
 		0,  9, 10, 11,
@@ -63,11 +65,12 @@
 
 	/* Interrogate PIIX4 to get PCI IRQ mapping */
 	for (i = 0; i <= 3; i++) {
-		pci_read_config_byte(pdev, 0x60+i, &reg_val);
-		if (reg_val & 0x80)
+		pci_read_config_byte(pdev, PIIX4_FUNC0_PIRQRC+i, &reg_val);
+		if (reg_val & PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE)
 			pci_irq[PCIA+i] = 0;	/* Disabled */
 		else
-			pci_irq[PCIA+i] = piixirqmap[reg_val & 15];
+			pci_irq[PCIA+i] = piixirqmap[reg_val &
+				PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK];
 	}
 
 	/* Done by YAMON 2.00 onwards */
@@ -76,8 +79,9 @@
 		 * Set top of main memory accessible by ISA or DMA
 		 * devices to 16 Mb.
 		 */
-		pci_read_config_byte(pdev, 0x69, &reg_val);
-		pci_write_config_byte(pdev, 0x69, reg_val | 0xf0);
+		pci_read_config_byte(pdev, PIIX4_FUNC0_TOM, &reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val |
+				PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK);
 	}
 }
 
@@ -93,10 +97,14 @@
 		/*
 		 * IDE Decode enable.
 		 */
-		pci_read_config_byte(pdev, 0x41, &reg_val);
-		pci_write_config_byte(pdev, 0x41, reg_val|0x80);
-		pci_read_config_byte(pdev, 0x43, &reg_val);
-		pci_write_config_byte(pdev, 0x43, reg_val|0x80);
+		pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
+			&reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
+			reg_val|PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN);
+		pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
+			&reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
+			reg_val|PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN);
 	}
 }
 
@@ -108,10 +116,12 @@
 {
 	u8 odlc, ndlc;
 
-	(void) pci_read_config_byte(dev, 0x82, &odlc);
+	(void) pci_read_config_byte(dev, PIIX4_FUNC0_DLC, &odlc);
 	/* Enable passive releases and delayed transaction */
-	ndlc = odlc | 7;
-	(void) pci_write_config_byte(dev, 0x82, ndlc);
+	ndlc = odlc | PIIX4_FUNC0_DLC_USBPR_EN |
+		      PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN |
+		      PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN;
+	(void) pci_write_config_byte(dev, PIIX4_FUNC0_DLC, ndlc);
 }
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index 18517dd..d471a26 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -363,9 +363,6 @@
 	spin_lock_init(&apc->lock);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->cfg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->cfg_base))
 		return PTR_ERR(apc->cfg_base);
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index 65ec032..785b265 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -362,25 +362,16 @@
 		return -ENOMEM;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->ctrl_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->ctrl_base))
 		return PTR_ERR(apc->ctrl_base);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->devcfg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->devcfg_base))
 		return PTR_ERR(apc->devcfg_base);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->crp_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->crp_base))
 		return PTR_ERR(apc->crp_base);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 33e7aa5..1bf60b1 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -120,51 +120,37 @@
 #ifdef CONFIG_OF
 void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
 {
-	const __be32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(node);
-	int np = pna + 5;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
 
 	pr_info("PCI host bridge %s ranges:\n", node->full_name);
-	ranges = of_get_property(node, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
 	hose->of_node = node;
 
-	while ((rlen -= np * 4) >= 0) {
-		u32 pci_space;
-		struct resource *res = NULL;
-		u64 addr, size;
+	if (of_pci_range_parser_init(&parser, node))
+		return;
 
-		pci_space = be32_to_cpup(&ranges[0]);
-		addr = of_translate_address(node, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+	for_each_of_pci_range(&parser, &range) {
+		struct resource *res = NULL;
+
+		switch (range.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_IO:
 			pr_info("  IO 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+				range.cpu_addr,
+				range.cpu_addr + range.size - 1);
 			hose->io_map_base =
-				(unsigned long)ioremap(addr, size);
+				(unsigned long)ioremap(range.cpu_addr,
+						       range.size);
 			res = hose->io_resource;
-			res->flags = IORESOURCE_IO;
 			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+		case IORESOURCE_MEM:
 			pr_info(" MEM 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+				range.cpu_addr,
+				range.cpu_addr + range.size - 1);
 			res = hose->mem_resource;
-			res->flags = IORESOURCE_MEM;
 			break;
 		}
-		if (res != NULL) {
-			res->start = addr;
-			res->name = node->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
+		if (res != NULL)
+			of_pci_range_to_resource(&range, node, res);
 	}
 }
 
diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig
deleted file mode 100644
index dd91fba..0000000
--- a/arch/mips/powertv/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-config BOOTLOADER_FAMILY
-	string "POWERTV Bootloader Family string"
-	default "85"
-	depends on POWERTV
-	help
-	  This value should be specified when the bootloader driver is disabled
-	  and must be exactly two characters long. Families supported are:
-	    R1 - RNG-100  R2 - RNG-200
-	    A1 - Class A  B1 - Class B
-	    E1 - Class E  F1 - Class F
-	    44 - 45xx     46 - 46xx
-	    85 - 85xx     86 - 86xx
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
deleted file mode 100644
index 39ca9f8..0000000
--- a/arch/mips/powertv/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-# Portions copyright (C)  2009 Cisco Systems, Inc.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the Cisco PowerTV-specific kernel interface routines
-# under Linux.
-#
-
-obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \
-	asic/ pci/
-
-obj-$(CONFIG_USB) += powertv-usb.o
diff --git a/arch/mips/powertv/Platform b/arch/mips/powertv/Platform
deleted file mode 100644
index 4eb5af1..0000000
--- a/arch/mips/powertv/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Cisco PowerTV Platform
-#
-platform-$(CONFIG_POWERTV)	+= powertv/
-cflags-$(CONFIG_POWERTV)	+=					\
-		-I$(srctree)/arch/mips/include/asm/mach-powertv
-load-$(CONFIG_POWERTV)		+= 0xffffffff90800000
diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile
deleted file mode 100644
index 35dcc53..0000000
--- a/arch/mips/powertv/asic/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (C) 2009  Scientific-Atlanta, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-#
-
-obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \
-	asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \
-	prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
deleted file mode 100644
index 2f539b4..0000000
--- a/arch/mips/powertv/asic/asic-calliope.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Locations of devices in the Calliope ASIC.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * Description:	 Defines the platform resources for the SA settop.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-#define CALLIOPE_ADDR(x)	(CALLIOPE_IO_BASE + (x))
-
-const struct register_map calliope_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
-	.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
-	.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
-
-	.chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)},
-	.chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)},
-	.chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)},
-	.chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)},
-	.uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)},
-	.uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)},
-	.uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)},
-	.uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)},
-	.uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)},
-	.uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)},
-	.uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)},
-
-	.int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)},
-	.int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)},
-	.int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)},
-	.int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)},
-	.int_config = {.phys = CALLIOPE_ADDR(0xA02810)},
-	.int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)},
-	.ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)},
-	.ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)},
-	.ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)},
-	.ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)},
-	.int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)},
-	.int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)},
-	.int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)},
-	.int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)},
-	.int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)},
-	.int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)},
-	.int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)},
-	.int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)},
-	.int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)},
-	.int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)},
-	.int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)},
-	.int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)},
-	.int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)},
-	.int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)},
-	.int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)},
-	.int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)},
-	.int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)},
-
-	.mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)},
-	.fs432x4b4_usb_ctl = {.phys = CALLIOPE_ADDR(0x980030)},
-	.test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)},
-	.crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)},
-	.usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)},
-	.usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)},
-	.ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)},
-	.ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)},
-	.bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)},
-	.usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)},
-	.usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)},
-	.usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)},
-	.usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)},
-
-	.pcie_regs = {.phys = 0x000000},	/* -doesn't exist- */
-	.tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)},
-	.tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)},
-	.gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)},
-	.gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)},
-	.gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)},
-	.watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)},
-	.front_panel = {.phys = 0x000000},	/* -not used- */
-};
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
deleted file mode 100644
index 7f8f342..0000000
--- a/arch/mips/powertv/asic/asic-cronus.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Locations of devices in the Cronus ASIC
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * Description:	 Defines the platform resources for the SA settop.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-#define CRONUS_ADDR(x)	(CRONUS_IO_BASE + (x))
-
-const struct register_map cronus_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
-	.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
-	.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
-
-	.chipver3 = {.phys = CRONUS_ADDR(0x2A0800)},
-	.chipver2 = {.phys = CRONUS_ADDR(0x2A0804)},
-	.chipver1 = {.phys = CRONUS_ADDR(0x2A0808)},
-	.chipver0 = {.phys = CRONUS_ADDR(0x2A080C)},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)},
-	.uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)},
-	.uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)},
-	.uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)},
-	.uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)},
-	.uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)},
-	.uart1_data = {.phys = CRONUS_ADDR(0x2A1818)},
-	.uart1_status = {.phys = CRONUS_ADDR(0x2A181C)},
-
-	.int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)},
-	.int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)},
-	.int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)},
-	.int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)},
-	.int_config = {.phys = CRONUS_ADDR(0x2A2810)},
-	.int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)},
-	.ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)},
-	.ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)},
-	.ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)},
-	.ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)},
-	.int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)},
-	.int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)},
-	.int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)},
-	.int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)},
-	.int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)},
-	.int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)},
-	.int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)},
-	.int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)},
-	.int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)},
-	.int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)},
-	.int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)},
-	.int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)},
-	.int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)},
-	.int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)},
-	.int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)},
-	.int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)},
-	.int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
-
-	.mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
-	.fs432x4b4_usb_ctl = {.phys = CRONUS_ADDR(0x1C0028)},
-	.test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
-	.crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
-	.usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
-	.usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
-	.ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
-	.ohci_hc_revision = {.phys = CRONUS_ADDR(0x21fc00)},
-	.bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
-	.usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
-	.usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
-	.usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)},
-	.usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)},
-
-	.pcie_regs = {.phys = CRONUS_ADDR(0x220000)},
-	.tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)},
-	.tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)},
-	.gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)},
-	.gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)},
-	.gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)},
-	.watchdog = {.phys = CRONUS_ADDR(0x2A2C30)},
-	.front_panel = {.phys = CRONUS_ADDR(0x2A3800)},
-};
diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c
deleted file mode 100644
index 1265b49..0000000
--- a/arch/mips/powertv/asic/asic-gaia.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Locations of devices in the Gaia ASIC
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 David VomLehn
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-const struct register_map gaia_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
-	.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
-	.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
-
-	.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
-	.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
-	.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
-	.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
-	.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
-	.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
-	.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
-	.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
-	.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
-	.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
-	.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},
-
-	.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
-	.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
-	.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
-	.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
-	.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
-	.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
-	.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
-	.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
-	.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
-	.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
-	.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
-	.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
-	.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
-	.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
-	.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
-	.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
-	.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
-	.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
-	.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
-	.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
-	.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
-	.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
-	.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
-	.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
-	.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
-	.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
-	.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},
-
-	.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
-	.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
-	.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
-	.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
-	.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
-	.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
-	.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
-	.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
-	.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
-	.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
-	.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
-	.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
-	.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},
-
-	.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
-	.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
-	.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
-	.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
-	.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
-	.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
-	.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
-	.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
-};
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
deleted file mode 100644
index 14e7de1..0000000
--- a/arch/mips/powertv/asic/asic-zeus.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Locations of devices in the Zeus ASIC
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * Description:	 Defines the platform resources for the SA settop.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-#define ZEUS_ADDR(x)	(ZEUS_IO_BASE + (x))
-
-const struct register_map zeus_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
-	.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
-	.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
-
-	.chipver3 = {.phys = ZEUS_ADDR(0x280800)},
-	.chipver2 = {.phys = ZEUS_ADDR(0x280804)},
-	.chipver1 = {.phys = ZEUS_ADDR(0x280808)},
-	.chipver0 = {.phys = ZEUS_ADDR(0x28080c)},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = ZEUS_ADDR(0x281800)},
-	.uart1_inten = {.phys = ZEUS_ADDR(0x281804)},
-	.uart1_config1 = {.phys = ZEUS_ADDR(0x281808)},
-	.uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)},
-	.uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)},
-	.uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)},
-	.uart1_data = {.phys = ZEUS_ADDR(0x281818)},
-	.uart1_status = {.phys = ZEUS_ADDR(0x28181C)},
-
-	.int_stat_3 = {.phys = ZEUS_ADDR(0x282800)},
-	.int_stat_2 = {.phys = ZEUS_ADDR(0x282804)},
-	.int_stat_1 = {.phys = ZEUS_ADDR(0x282808)},
-	.int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)},
-	.int_config = {.phys = ZEUS_ADDR(0x282810)},
-	.int_int_scan = {.phys = ZEUS_ADDR(0x282818)},
-	.ien_int_3 = {.phys = ZEUS_ADDR(0x282830)},
-	.ien_int_2 = {.phys = ZEUS_ADDR(0x282834)},
-	.ien_int_1 = {.phys = ZEUS_ADDR(0x282838)},
-	.ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)},
-	.int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)},
-	.int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)},
-	.int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)},
-	.int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)},
-	.int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)},
-	.int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)},
-	.int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)},
-	.int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)},
-	.int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)},
-	.int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)},
-	.int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)},
-	.int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)},
-	.int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)},
-	.int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)},
-	.int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)},
-	.int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)},
-	.int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)},
-
-	.mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)},
-	.fs432x4b4_usb_ctl = {.phys = ZEUS_ADDR(0x1a0018)},
-	.test_bus = {.phys = ZEUS_ADDR(0x1a0238)},
-	.crt_spare = {.phys = ZEUS_ADDR(0x1a0090)},
-	.usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)},
-	.usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)},
-	.ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)},
-	.ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)},
-	.bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)},
-	.usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)},
-	.usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)},
-	.usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)},
-	.usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)},
-
-	.pcie_regs = {.phys = ZEUS_ADDR(0x200000)},
-	.tim_ch = {.phys = ZEUS_ADDR(0x282C10)},
-	.tim_cl = {.phys = ZEUS_ADDR(0x282C14)},
-	.gpio_dout = {.phys = ZEUS_ADDR(0x282c20)},
-	.gpio_din = {.phys = ZEUS_ADDR(0x282c24)},
-	.gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)},
-	.watchdog = {.phys = ZEUS_ADDR(0x282c30)},
-	.front_panel = {.phys = ZEUS_ADDR(0x283800)},
-};
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
deleted file mode 100644
index 8380605..0000000
--- a/arch/mips/powertv/asic/asic_devices.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- *
- * Description:	 Defines the platform resources for Gaia-based settops.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/resource.h>
-#include <linux/serial_reg.h>
-#include <linux/io.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <asm/page.h>
-#include <linux/swap.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/asic_regs.h>
-#include <asm/mach-powertv/interrupts.h>
-
-#ifdef CONFIG_BOOTLOADER_DRIVER
-#include <asm/mach-powertv/kbldr.h>
-#endif
-#include <asm/bootinfo.h>
-
-#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
-
-/*
- * Forward Prototypes
- */
-static void pmem_setup_resource(void);
-
-/*
- * Global Variables
- */
-enum asic_type asic;
-
-unsigned int platform_features;
-unsigned int platform_family;
-struct register_map _asic_register_map;
-EXPORT_SYMBOL(_asic_register_map);		/* Exported for testing */
-unsigned long asic_phy_base;
-unsigned long asic_base;
-EXPORT_SYMBOL(asic_base);			/* Exported for testing */
-struct resource *gp_resources;
-
-/*
- * Don't recommend to use it directly, it is usually used by kernel internally.
- * Portable code should be using interfaces such as ioremp, dma_map_single, etc.
- */
-unsigned long phys_to_dma_offset;
-EXPORT_SYMBOL(phys_to_dma_offset);
-
-/*
- *
- * IO Resource Definition
- *
- */
-
-struct resource asic_resource = {
-	.name  = "ASIC Resource",
-	.start = 0,
-	.end   = ASIC_IO_SIZE,
-	.flags = IORESOURCE_MEM,
-};
-
-/*
- * Allow override of bootloader-specified model
- * Returns zero on success, a negative errno value on failure.	This parameter
- * allows overriding of the bootloader-specified model.
- */
-static char __initdata cmdline[COMMAND_LINE_SIZE];
-
-#define FORCEFAMILY_PARAM	"forcefamily"
-
-/*
- * check_forcefamily - check for, and parse, forcefamily command line parameter
- * @forced_family:	Pointer to two-character array in which to store the
- *			value of the forcedfamily parameter, if any.
- */
-static __init int check_forcefamily(unsigned char forced_family[2])
-{
-	const char *p;
-
-	forced_family[0] = '\0';
-	forced_family[1] = '\0';
-
-	/* Check the command line for a forcefamily directive */
-	strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1);
-	p = strstr(cmdline, FORCEFAMILY_PARAM);
-	if (p && (p != cmdline) && (*(p - 1) != ' '))
-		p = strstr(p, " " FORCEFAMILY_PARAM "=");
-
-	if (p) {
-		p += strlen(FORCEFAMILY_PARAM "=");
-
-		if (*p == '\0' || *(p + 1) == '\0' ||
-			(*(p + 2) != '\0' && *(p + 2) != ' '))
-			pr_err(FORCEFAMILY_PARAM " must be exactly two "
-				"characters long, ignoring value\n");
-
-		else {
-			forced_family[0] = *p;
-			forced_family[1] = *(p + 1);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * platform_set_family - determine major platform family type.
- *
- * Returns family type; -1 if none
- * Returns the family type; -1 if none
- *
- */
-static __init noinline void platform_set_family(void)
-{
-	unsigned char forced_family[2];
-	unsigned short bootldr_family;
-
-	if (check_forcefamily(forced_family) == 0)
-		bootldr_family = BOOTLDRFAMILY(forced_family[0],
-			forced_family[1]);
-	else
-		bootldr_family = (unsigned short) BOOTLDRFAMILY(
-			CONFIG_BOOTLOADER_FAMILY[0],
-			CONFIG_BOOTLOADER_FAMILY[1]);
-
-	pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
-
-	switch (bootldr_family) {
-	case BOOTLDRFAMILY('R', '1'):
-		platform_family = FAMILY_1500;
-		break;
-	case BOOTLDRFAMILY('4', '4'):
-		platform_family = FAMILY_4500;
-		break;
-	case BOOTLDRFAMILY('4', '6'):
-		platform_family = FAMILY_4600;
-		break;
-	case BOOTLDRFAMILY('A', '1'):
-		platform_family = FAMILY_4600VZA;
-		break;
-	case BOOTLDRFAMILY('8', '5'):
-		platform_family = FAMILY_8500;
-		break;
-	case BOOTLDRFAMILY('R', '2'):
-		platform_family = FAMILY_8500RNG;
-		break;
-	case BOOTLDRFAMILY('8', '6'):
-		platform_family = FAMILY_8600;
-		break;
-	case BOOTLDRFAMILY('B', '1'):
-		platform_family = FAMILY_8600VZB;
-		break;
-	case BOOTLDRFAMILY('E', '1'):
-		platform_family = FAMILY_1500VZE;
-		break;
-	case BOOTLDRFAMILY('F', '1'):
-		platform_family = FAMILY_1500VZF;
-		break;
-	case BOOTLDRFAMILY('8', '7'):
-		platform_family = FAMILY_8700;
-		break;
-	default:
-		platform_family = -1;
-	}
-}
-
-unsigned int platform_get_family(void)
-{
-	return platform_family;
-}
-EXPORT_SYMBOL(platform_get_family);
-
-/*
- * platform_get_asic - determine the ASIC type.
- *
- * Returns the ASIC type, or ASIC_UNKNOWN if unknown
- *
- */
-enum asic_type platform_get_asic(void)
-{
-	return asic;
-}
-EXPORT_SYMBOL(platform_get_asic);
-
-/*
- * set_register_map - set ASIC register configuration
- * @phys_base:	Physical address of the base of the ASIC registers
- * @map:	Description of key ASIC registers
- */
-static void __init set_register_map(unsigned long phys_base,
-	const struct register_map *map)
-{
-	asic_phy_base = phys_base;
-	_asic_register_map = *map;
-	register_map_virtualize(&_asic_register_map);
-	asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE);
-}
-
-/**
- * configure_platform - configuration based on platform type.
- */
-void __init configure_platform(void)
-{
-	platform_set_family();
-
-	switch (platform_family) {
-	case FAMILY_1500:
-	case FAMILY_1500VZE:
-	case FAMILY_1500VZF:
-		platform_features = FFS_CAPABLE;
-		asic = ASIC_CALLIOPE;
-		set_register_map(CALLIOPE_IO_BASE, &calliope_register_map);
-
-		if (platform_family == FAMILY_1500VZE) {
-			gp_resources = non_dvr_vze_calliope_resources;
-			pr_info("Platform: 1500/Vz Class E - "
-				"CALLIOPE, NON_DVR_CAPABLE\n");
-		} else if (platform_family == FAMILY_1500VZF) {
-			gp_resources = non_dvr_vzf_calliope_resources;
-			pr_info("Platform: 1500/Vz Class F - "
-				"CALLIOPE, NON_DVR_CAPABLE\n");
-		} else {
-			gp_resources = non_dvr_calliope_resources;
-			pr_info("Platform: 1500/RNG100 - CALLIOPE, "
-				"NON_DVR_CAPABLE\n");
-		}
-		break;
-
-	case FAMILY_4500:
-		platform_features = FFS_CAPABLE | PCIE_CAPABLE |
-			DISPLAY_CAPABLE;
-		asic = ASIC_ZEUS;
-		set_register_map(ZEUS_IO_BASE, &zeus_register_map);
-		gp_resources = non_dvr_zeus_resources;
-
-		pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_4600:
-	{
-		unsigned int chipversion = 0;
-
-		/* The settop has PCIE but it isn't used, so don't advertise
-		 * it*/
-		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
-
-		/* Cronus and Cronus Lite have the same register map */
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
-
-		/* ASIC version will determine if this is a real CronusLite or
-		 * Castrati(Cronus) */
-		chipversion  = asic_read(chipver3) << 24;
-		chipversion |= asic_read(chipver2) << 16;
-		chipversion |= asic_read(chipver1) << 8;
-		chipversion |= asic_read(chipver0);
-
-		if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11))
-			asic = ASIC_CRONUS;
-		else
-			asic = ASIC_CRONUSLITE;
-
-		gp_resources = non_dvr_cronuslite_resources;
-		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
-			"chipversion=0x%08X\n",
-			(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
-			chipversion);
-		break;
-	}
-	case FAMILY_4600VZA:
-		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
-		asic = ASIC_CRONUS;
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
-		gp_resources = non_dvr_cronus_resources;
-
-		pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_8500:
-	case FAMILY_8500RNG:
-		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
-			DISPLAY_CAPABLE;
-		asic = ASIC_ZEUS;
-		set_register_map(ZEUS_IO_BASE, &zeus_register_map);
-		gp_resources = dvr_zeus_resources;
-
-		pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_8600:
-	case FAMILY_8600VZB:
-		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
-			DISPLAY_CAPABLE;
-		asic = ASIC_CRONUS;
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
-		gp_resources = dvr_cronus_resources;
-
-		pr_info("Platform: 8600/Vz Class B - CRONUS, "
-			"DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_8700:
-		platform_features = FFS_CAPABLE | PCIE_CAPABLE;
-		asic = ASIC_GAIA;
-		set_register_map(GAIA_IO_BASE, &gaia_register_map);
-		gp_resources = dvr_gaia_resources;
-
-		pr_info("Platform: 8700 - GAIA, DVR_CAPABLE\n");
-		break;
-
-	default:
-		pr_crit("Platform:  UNKNOWN PLATFORM\n");
-		break;
-	}
-
-	switch (asic) {
-	case ASIC_ZEUS:
-		phys_to_dma_offset = 0x30000000;
-		break;
-	case ASIC_CALLIOPE:
-		phys_to_dma_offset = 0x10000000;
-		break;
-	case ASIC_CRONUSLITE:
-		/* Fall through */
-	case ASIC_CRONUS:
-		/*
-		 * TODO: We suppose 0x10000000 aliases into 0x20000000-
-		 * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
-		 * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
-		 */
-		phys_to_dma_offset = 0x10000000;
-		break;
-	default:
-		phys_to_dma_offset = 0x00000000;
-		break;
-	}
-}
-
-/*
- * RESOURCE ALLOCATION
- *
- */
-/*
- * Allocates/reserves the Platform memory resources early in the boot process.
- * This ignores any resources that are designated IORESOURCE_IO
- */
-void __init platform_alloc_bootmem(void)
-{
-	int i;
-	int total = 0;
-
-	/* Get persistent memory data from command line before allocating
-	 * resources. This need to happen before normal command line parsing
-	 * has been done */
-	pmem_setup_resource();
-
-	/* Loop through looking for resources that want a particular address */
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		int size = resource_size(&gp_resources[i]);
-		if ((gp_resources[i].start != 0) &&
-			((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
-			reserve_bootmem(dma_to_phys(gp_resources[i].start),
-				size, 0);
-			total += resource_size(&gp_resources[i]);
-			pr_info("reserve resource %s at %08x (%u bytes)\n",
-				gp_resources[i].name, gp_resources[i].start,
-				resource_size(&gp_resources[i]));
-		}
-	}
-
-	/* Loop through assigning addresses for those that are left */
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		int size = resource_size(&gp_resources[i]);
-		if ((gp_resources[i].start == 0) &&
-			((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
-			void *mem = alloc_bootmem_pages(size);
-
-			if (mem == NULL)
-				pr_err("Unable to allocate bootmem pages "
-					"for %s\n", gp_resources[i].name);
-
-			else {
-				gp_resources[i].start =
-					phys_to_dma(virt_to_phys(mem));
-				gp_resources[i].end =
-					gp_resources[i].start + size - 1;
-				total += size;
-				pr_info("allocate resource %s at %08x "
-						"(%u bytes)\n",
-					gp_resources[i].name,
-					gp_resources[i].start, size);
-			}
-		}
-	}
-
-	pr_info("Total Platform driver memory allocation: 0x%08x\n", total);
-
-	/* indicate resources that are platform I/O related */
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		if ((gp_resources[i].start != 0) &&
-			((gp_resources[i].flags & IORESOURCE_IO) != 0)) {
-			pr_info("reserved platform resource %s at %08x\n",
-				gp_resources[i].name, gp_resources[i].start);
-		}
-	}
-}
-
-/*
- *
- * PERSISTENT MEMORY (PMEM) CONFIGURATION
- *
- */
-static unsigned long pmemaddr __initdata;
-
-static int __init early_param_pmemaddr(char *p)
-{
-	pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0);
-	return 0;
-}
-early_param("pmemaddr", early_param_pmemaddr);
-
-static long pmemlen __initdata;
-
-static int __init early_param_pmemlen(char *p)
-{
-/* TODO: we can use this code when and if the bootloader ever changes this */
-#if 0
-	pmemlen = (unsigned long)simple_strtoul(p, NULL, 0);
-#else
-	pmemlen = 0x20000;
-#endif
-	return 0;
-}
-early_param("pmemlen", early_param_pmemlen);
-
-/*
- * Set up persistent memory. If we were given values, we patch the array of
- * resources. Otherwise, persistent memory may be allocated anywhere at all.
- */
-static void __init pmem_setup_resource(void)
-{
-	struct resource *resource;
-	resource = asic_resource_get("DiagPersistentMemory");
-
-	if (resource && pmemaddr && pmemlen) {
-		/* The address provided by bootloader is in kseg0. Convert to
-		 * a bus address. */
-		resource->start = phys_to_dma(pmemaddr - 0x80000000);
-		resource->end = resource->start + pmemlen - 1;
-
-		pr_info("persistent memory: start=0x%x	end=0x%x\n",
-			resource->start, resource->end);
-	}
-}
-
-/*
- *
- * RESOURCE ACCESS FUNCTIONS
- *
- */
-
-/**
- * asic_resource_get - retrieves parameters for a platform resource.
- * @name:	string to match resource
- *
- * Returns a pointer to a struct resource corresponding to the given name.
- *
- * CANNOT BE NAMED platform_resource_get, which would be the obvious choice,
- * as this function name is already declared
- */
-struct resource *asic_resource_get(const char *name)
-{
-	int i;
-
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		if (strcmp(gp_resources[i].name, name) == 0)
-			return &gp_resources[i];
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL(asic_resource_get);
-
-/**
- * platform_release_memory - release pre-allocated memory
- * @ptr:	pointer to memory to release
- * @size:	size of resource
- *
- * This must only be called for memory allocated or reserved via the boot
- * memory allocator.
- */
-void platform_release_memory(void *ptr, int size)
-{
-	free_reserved_area(ptr, ptr + size, -1, NULL);
-}
-EXPORT_SYMBOL(platform_release_memory);
-
-/*
- *
- * FEATURE AVAILABILITY FUNCTIONS
- *
- */
-int platform_supports_dvr(void)
-{
-	return (platform_features & DVR_CAPABLE) != 0;
-}
-
-int platform_supports_ffs(void)
-{
-	return (platform_features & FFS_CAPABLE) != 0;
-}
-
-int platform_supports_pcie(void)
-{
-	return (platform_features & PCIE_CAPABLE) != 0;
-}
-
-int platform_supports_display(void)
-{
-	return (platform_features & DISPLAY_CAPABLE) != 0;
-}
diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c
deleted file mode 100644
index f44cd92..0000000
--- a/arch/mips/powertv/asic/asic_int.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- * Portions copyright (C) 2009	Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the PowerTV
- * platform.
- *
- * The interrupt controller is located in the South Bridge a PIIX4 device
- * with two internal 82C95 interrupt controllers.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/kernel.h>
-#include <linux/random.h>
-
-#include <asm/irq_cpu.h>
-#include <linux/io.h>
-#include <asm/irq_regs.h>
-#include <asm/setup.h>
-#include <asm/mips-boards/generic.h>
-
-#include <asm/mach-powertv/asic_regs.h>
-
-static DEFINE_RAW_SPINLOCK(asic_irq_lock);
-
-static inline int get_int(void)
-{
-	unsigned long flags;
-	int irq;
-
-	raw_spin_lock_irqsave(&asic_irq_lock, flags);
-
-	irq = (asic_read(int_int_scan) >> 4) - 1;
-
-	if (irq == 0 || irq >= NR_IRQS)
-		irq = -1;
-
-	raw_spin_unlock_irqrestore(&asic_irq_lock, flags);
-
-	return irq;
-}
-
-static void asic_irqdispatch(void)
-{
-	int irq;
-
-	irq = get_int();
-	if (irq < 0)
-		return;	 /* interrupt has already been cleared */
-
-	do_IRQ(irq);
-}
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-	return fls(pending) - 1 + CAUSEB_IP;
-}
-
-/*
- * TODO: check how it works under EIC mode.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq == CAUSEF_IP3)
-		asic_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(irq);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	int i;
-
-	asic_irq_init();
-
-	/*
-	 * Initialize interrupt exception vectors.
-	 */
-	if (cpu_has_veic || cpu_has_vint) {
-		int nvec = cpu_has_veic ? 64 : 8;
-		for (i = 0; i < nvec; i++)
-			set_vi_handler(i, asic_irqdispatch);
-	}
-}
diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c
deleted file mode 100644
index 9344902..0000000
--- a/arch/mips/powertv/asic/irq_asic.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Portions copyright (C) 2005-2009 Scientific Atlanta
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- * Modified from arch/mips/kernel/irq-rm7000.c:
- * Copyright (C) 2003 Ralf Baechle
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-powertv/asic_regs.h>
-
-static inline void unmask_asic_irq(struct irq_data *d)
-{
-	unsigned long enable_bit;
-	unsigned int irq = d->irq;
-
-	enable_bit = (1 << (irq & 0x1f));
-
-	switch (irq >> 5) {
-	case 0:
-		asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0);
-		break;
-	case 1:
-		asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1);
-		break;
-	case 2:
-		asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2);
-		break;
-	case 3:
-		asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3);
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void mask_asic_irq(struct irq_data *d)
-{
-	unsigned long disable_mask;
-	unsigned int irq = d->irq;
-
-	disable_mask = ~(1 << (irq & 0x1f));
-
-	switch (irq >> 5) {
-	case 0:
-		asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0);
-		break;
-	case 1:
-		asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1);
-		break;
-	case 2:
-		asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2);
-		break;
-	case 3:
-		asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3);
-		break;
-	default:
-		BUG();
-	}
-}
-
-static struct irq_chip asic_irq_chip = {
-	.name = "ASIC Level",
-	.irq_mask = mask_asic_irq,
-	.irq_unmask = unmask_asic_irq,
-};
-
-void __init asic_irq_init(void)
-{
-	int i;
-
-	/* set priority to 0 */
-	write_c0_status(read_c0_status() & ~(0x0000fc00));
-
-	asic_write(0, ien_int_0);
-	asic_write(0, ien_int_1);
-	asic_write(0, ien_int_2);
-	asic_write(0, ien_int_3);
-
-	asic_write(0x0fffffff, int_level_3_3);
-	asic_write(0xffffffff, int_level_3_2);
-	asic_write(0xffffffff, int_level_3_1);
-	asic_write(0xffffffff, int_level_3_0);
-	asic_write(0xffffffff, int_level_2_3);
-	asic_write(0xffffffff, int_level_2_2);
-	asic_write(0xffffffff, int_level_2_1);
-	asic_write(0xffffffff, int_level_2_0);
-	asic_write(0xffffffff, int_level_1_3);
-	asic_write(0xffffffff, int_level_1_2);
-	asic_write(0xffffffff, int_level_1_1);
-	asic_write(0xffffffff, int_level_1_0);
-	asic_write(0xffffffff, int_level_0_3);
-	asic_write(0xffffffff, int_level_0_2);
-	asic_write(0xffffffff, int_level_0_1);
-	asic_write(0xffffffff, int_level_0_0);
-
-	asic_write(0xf, int_int_scan);
-
-	/*
-	 * Initialize interrupt handlers.
-	 */
-	for (i = 0; i < NR_IRQS; i++)
-		irq_set_chip_and_handler(i, &asic_irq_chip, handle_level_irq);
-}
diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c
deleted file mode 100644
index 98dc516..0000000
--- a/arch/mips/powertv/asic/prealloc-calliope.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * Memory pre-allocations for Calliope boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * NON_DVR_CAPABLE CALLIOPE RESOURCES
- */
-struct resource non_dvr_calliope_resources[] __initdata =
-{
-	/*
-	 * VIDEO / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~36.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26700000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 6MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x27500000, 0x27c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x26700000, 0x26700000+(14*1048576)-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Synopsys GMAC Memory Region
-	 */
-	/* 64KiB */
-	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-
-struct resource non_dvr_vze_calliope_resources[] __initdata =
-{
-	/*
-	 * VIDEO / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x22000000, 0x22200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x22200000, 0x22202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (10.12MiB) */
-	PREALLOC_NORMAL("MediaMemory1", 0x22202000, 0x22C20B85-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 3.125MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x20396000, 0x206B6000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (2.59MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x20100000, 0x20396000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x206B6000, 0x206D6000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Synopsys GMAC Memory Region
-	 */
-	/* 64KiB */
-	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-struct resource non_dvr_vzf_calliope_resources[] __initdata =
-{
-	/*
-	 * VIDEO / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~19.4 (21.5MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x25580000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 4.5MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00480000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x25600000, 0x25600000+(14*1048576)-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Synopsys GMAC Memory Region
-	 */
-	/* 64KiB */
-	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c
deleted file mode 100644
index 7c6ce75..0000000
--- a/arch/mips/powertv/asic/prealloc-cronus.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Memory pre-allocations for Cronus boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * DVR_CAPABLE CRONUS RESOURCES
- */
-struct resource dvr_cronus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 2 image (2MiB) */
-	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 12MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer
-	 */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x002EA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * ITFS
-	 */
-	/* 815,104 bytes each for 2 ITFS partitions. */
-	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1, IORESOURCE_MEM)
-
-	/*
-	 * AVFS
-	 */
-	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
-		IORESOURCE_MEM)
-
-	/* 4KiB */
-	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * KAVNET
-	 */
-	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
-	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
-		IORESOURCE_MEM)
-	/* NP Image - must be video bank 1 (320KiB) */
-	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
-	/* NP IPC - must be video bank 2 (512KiB) */
-	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-/*
- * NON_DVR_CAPABLE CRONUS RESOURCES
- */
-struct resource non_dvr_cronus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 2 image (2MiB) */
-	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 12MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, IORESOURCE_MEM)
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
-
-	/*
-	 * KAVNET
-	 */
-	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
-	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
-		IORESOURCE_MEM)
-	/* NP Image - must be video bank 1 (320KiB) */
-	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
-	/* NP IPC - must be video bank 2 (512KiB) */
-	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c
deleted file mode 100644
index a7937ba..0000000
--- a/arch/mips/powertv/asic/prealloc-cronuslite.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Memory pre-allocations for Cronus Lite boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * NON_DVR_CAPABLE CRONUSLITE RESOURCES
- */
-struct resource non_dvr_cronuslite_resources[] __initdata =
-{
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x60000000, 0x60200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x60200000, 0x60202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x60202000, 0x62000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 6MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
-
-	/*
-	 * KAVNET
-	 */
-	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
-	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
-		IORESOURCE_MEM)
-	/* NP Image - must be video bank 1 (320KiB) */
-	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
-	/* NP IPC - must be video bank 2 (512KiB) */
-	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc-gaia.c b/arch/mips/powertv/asic/prealloc-gaia.c
deleted file mode 100644
index 2303bbf..0000000
--- a/arch/mips/powertv/asic/prealloc-gaia.c
+++ /dev/null
@@ -1,589 +0,0 @@
-/*
- * Memory pre-allocations for Gaia boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 David VomLehn
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-/*
- * DVR_CAPABLE GAIA RESOURCES
- */
-struct resource dvr_gaia_resources[] __initdata = {
-	/*
-	 *
-	 * VIDEO1 / LX1
-	 *
-	 */
-	{
-		.name	= "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start	= 0x24000000,
-		.end	= 0x241FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start	= 0x24200000,
-		.end	= 0x24201FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "MediaMemory1",
-		.start	= 0x24202000,
-		.end	= 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * VIDEO2 / LX2
-	 *
-	 */
-	{
-		.name	= "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start	= 0x60000000,
-		.end	= 0x601FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start	= 0x60200000,
-		.end	= 0x60201FFF,
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "MediaMemory2",
-		.start	= 0x60202000,
-		.end	= 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
-	 */
-	{
-		.name	= "DSP_Image_Buff",
-		.start	= 0x00000000,
-		.end	= 0x000FFFFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_CPU_PCM_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00009FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_AUX_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_Main_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * STAVEM driver/STAPI
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
-	 */
-	{
-		.name	= "AVMEMPartition0",
-		.start	= 0x63580000,
-		.end	= 0x64180000 - 1,  /* 12 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "Docsis",
-		.start	= 0x62000000,
-		.end	= 0x62700000 - 1,	/* 7 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
-	 */
-	{
-		.name	= "GraphicsHeap",
-		.start	= 0x62700000,
-		.end	= 0x63500000 - 1,	/* 14 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "MulticomSHM",
-		.start	= 0x26000000,
-		.end	= 0x26020000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "BMM_Buffer",
-		.start	= 0x00000000,
-		.end	= 0x00280000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
-	 */
-	{
-		.name	= "DisplayBins0",
-		.start	= 0x00000000,
-		.end	= 0x00000FFF,		/* 4 KB total */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
-	 */
-	{
-		.name	= "DisplayBins1",
-		.start	= 0x64AD4000,
-		.end	= 0x64AD5000 - 1,  /* 4 KB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * ITFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "ITFS",
-		.start	= 0x64180000,
-		/* 815,104 bytes each for 2 ITFS partitions. */
-		.end	= 0x6430DFFF,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * AVFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "AvfsDmaMem",
-		.start	= 0x6430E000,
-		/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
-		.end	= 0x64AD0000 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "AvfsFileSys",
-		.start	= 0x64AD0000,
-		.end	= 0x64AD1000 - 1,  /* 4K */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
-	 */
-	{
-		.name	= "SmartCardInfo",
-		.start	= 0x64AD1000,
-		.end	= 0x64AD3800 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
-	 */
-	{
-		.name	= "NP_Reset_Vector",
-		.start	= 0x27c00000,
-		.end	= 0x27c01000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_Image",
-		.start	= 0x27020000,
-		.end	= 0x27060000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_IPC",
-		.start	= 0x63500000,
-		.end	= 0x63580000 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 * Add other resources here
-	 */
-	{ },
-};
-
-/*
- * NON_DVR_CAPABLE GAIA RESOURCES
- */
-struct resource non_dvr_gaia_resources[] __initdata = {
-	/*
-	 *
-	 * VIDEO1 / LX1
-	 *
-	 */
-	{
-		.name	= "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start	= 0x24000000,
-		.end	= 0x241FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start	= 0x24200000,
-		.end	= 0x24201FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "MediaMemory1",
-		.start	= 0x24202000,
-		.end	= 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * VIDEO2 / LX2
-	 *
-	 */
-	{
-		.name	= "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start	= 0x60000000,
-		.end	= 0x601FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start	= 0x60200000,
-		.end	= 0x60201FFF,
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "MediaMemory2",
-		.start	= 0x60202000,
-		.end	= 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
-	 */
-	{
-		.name	= "DSP_Image_Buff",
-		.start	= 0x00000000,
-		.end	= 0x000FFFFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_CPU_PCM_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00009FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_AUX_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_Main_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * STAVEM driver/STAPI
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
-	 */
-	{
-		.name	= "AVMEMPartition0",
-		.start	= 0x63580000,
-		.end	= 0x64180000 - 1,  /* 12 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "Docsis",
-		.start	= 0x62000000,
-		.end	= 0x62700000 - 1,	/* 7 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
-	 */
-	{
-		.name	= "GraphicsHeap",
-		.start	= 0x62700000,
-		.end	= 0x63500000 - 1,	/* 14 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "MulticomSHM",
-		.start	= 0x26000000,
-		.end	= 0x26020000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "BMM_Buffer",
-		.start	= 0x00000000,
-		.end	= 0x000AA000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
-	 */
-	{
-		.name	= "DisplayBins0",
-		.start	= 0x00000000,
-		.end	= 0x00000FFF,		/* 4 KB total */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
-	 */
-	{
-		.name	= "DisplayBins1",
-		.start	= 0x64AD4000,
-		.end	= 0x64AD5000 - 1,  /* 4 KB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * AVFS: player HAL memory
-	 *
-	 *
-	 */
-	{
-		.name	= "AvfsDmaMem",
-		.start	= 0x6430E000,
-		.end	= 0x645D2C00 - 1,  /* 945K * 3 for playback */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
-	 */
-	{
-		.name	= "DiagPersistentMemory",
-		.start	= 0x00000000,
-		.end	= 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
-	 */
-	{
-		.name	= "SmartCardInfo",
-		.start	= 0x64AD1000,
-		.end	= 0x64AD3800 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
-	 */
-	{
-		.name	= "NP_Reset_Vector",
-		.start	= 0x27c00000,
-		.end	= 0x27c01000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_Image",
-		.start	= 0x27020000,
-		.end	= 0x27060000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_IPC",
-		.start	= 0x63500000,
-		.end	= 0x63580000 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	{ },
-};
diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c
deleted file mode 100644
index 6e76f09..0000000
--- a/arch/mips/powertv/asic/prealloc-zeus.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Memory pre-allocations for Zeus boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * DVR_CAPABLE RESOURCES
- */
-struct resource dvr_zeus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 2 image (2MiB) */
-	PREALLOC_NORMAL("ST231bImage", 0x30000000, 0x30200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231bMonitor", 0x30200000, 0x30202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory2", 0x30202000, 0x32000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 12MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer
-	 */
-	/* 2.5MiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * ITFS
-	 */
-	/* 815,104 bytes each for 2 ITFS partitions. */
-	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS
-	 */
-	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* 4KiB */
-	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-/*
- * NON_DVR_CAPABLE ZEUS RESOURCES
- */
-struct resource non_dvr_zeus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 6MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer
-	 */
-	/* 2.5MiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc.h b/arch/mips/powertv/asic/prealloc.h
deleted file mode 100644
index 8e682df..0000000
--- a/arch/mips/powertv/asic/prealloc.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Definitions for memory preallocations
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
-#define _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
-
-#define KIBIBYTE(n) ((n) * 1024)    /* Number of kibibytes */
-#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
-
-/* "struct resource" array element definition */
-#define PREALLOC(NAME, START, END, FLAGS) {	\
-		.name = (NAME),			\
-		.start = (START),		\
-		.end = (END),			\
-		.flags = (FLAGS)		\
-	},
-
-/* Individual resources in the preallocated resource arrays are defined using
- *  macros.  These macros are conditionally defined based on their
- *  corresponding kernel configuration flag:
- *    - CONFIG_PREALLOC_NORMAL: preallocate resources for a normal settop box
- *    - CONFIG_PREALLOC_TFTP: preallocate the TFTP download resource
- *    - CONFIG_PREALLOC_DOCSIS: preallocate the DOCSIS resource
- *    - CONFIG_PREALLOC_PMEM: reserve space for persistent memory
- */
-#ifdef CONFIG_PREALLOC_NORMAL
-#define PREALLOC_NORMAL(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_NORMAL(name, start, end, flags)
-#endif
-
-#ifdef CONFIG_PREALLOC_TFTP
-#define PREALLOC_TFTP(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_TFTP(name, start, end, flags)
-#endif
-
-#ifdef CONFIG_PREALLOC_DOCSIS
-#define PREALLOC_DOCSIS(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_DOCSIS(name, start, end, flags)
-#endif
-
-#ifdef CONFIG_PREALLOC_PMEM
-#define PREALLOC_PMEM(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_PMEM(name, start, end, flags)
-#endif
-#endif
diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c
deleted file mode 100644
index 4989263..0000000
--- a/arch/mips/powertv/init.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2004, 2005	 MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * PROM library initialisation code.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <linux/io.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-#include <asm/mips-boards/generic.h>
-#include <asm/mach-powertv/asic.h>
-
-#include "init.h"
-
-static int *_prom_envp;
-unsigned long _prom_memsize;
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension, if running in 64-bit mode.
- */
-#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
-
-char *prom_getenv(char *envname)
-{
-	char *result = NULL;
-
-	if (_prom_envp != NULL) {
-		/*
-		 * Return a pointer to the given environment variable.
-		 * In 64-bit mode: we're using 64-bit pointers, but all pointers
-		 * in the PROM structures are only 32-bit, so we need some
-		 * workarounds, if we are running in 64-bit mode.
-		 */
-		int i, index = 0;
-
-		i = strlen(envname);
-
-		while (prom_envp(index)) {
-			if (strncmp(envname, prom_envp(index), i) == 0) {
-				result = prom_envp(index + 1);
-				break;
-			}
-			index += 2;
-		}
-	}
-
-	return result;
-}
-
-void __init prom_init(void)
-{
-	int prom_argc;
-	char *prom_argv;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char *) fw_arg1;
-	_prom_envp = (int *) fw_arg2;
-	_prom_memsize = (unsigned long) fw_arg3;
-
-	if (prom_argc == 1) {
-		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
-	}
-
-	configure_platform();
-	prom_meminit();
-}
diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h
deleted file mode 100644
index c1a8bd0..0000000
--- a/arch/mips/powertv/init.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Definitions from powertv init.c file
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Author: David VomLehn
- */
-
-#ifndef _POWERTV_INIT_H
-#define _POWERTV_INIT_H
-extern unsigned long _prom_memsize;
-extern void prom_meminit(void);
-extern char *prom_getenv(char *name);
-#endif
diff --git a/arch/mips/powertv/ioremap.c b/arch/mips/powertv/ioremap.c
deleted file mode 100644
index d060478..0000000
--- a/arch/mips/powertv/ioremap.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *			ioremap.c
- *
- * Support for mapping between dma_addr_t values a phys_addr_t values.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 David VomLehn <dvomlehn@cisco.com>
- *
- * Description:	 Defines the platform resources for the SA settop.
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/mach-powertv/ioremap.h>
-
-/*
- * Define the sizes of and masks for grains in physical and DMA space. The
- * values are the same but the types are not.
- */
-#define IOR_PHYS_GRAIN		((phys_addr_t) 1 << IOR_LSBITS)
-#define IOR_PHYS_GRAIN_MASK	(IOR_PHYS_GRAIN - 1)
-
-#define IOR_DMA_GRAIN		((dma_addr_t) 1 << IOR_LSBITS)
-#define IOR_DMA_GRAIN_MASK	(IOR_DMA_GRAIN - 1)
-
-/*
- * Values that, when accessed by an index derived from a phys_addr_t and
- * added to phys_addr_t value, yield a DMA address
- */
-struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
-EXPORT_SYMBOL(_ior_phys_to_dma);
-
-/*
- * Values that, when accessed by an index derived from a dma_addr_t and
- * added to that dma_addr_t value, yield a physical address
- */
-struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
-EXPORT_SYMBOL(_ior_dma_to_phys);
-
-/**
- * setup_dma_to_phys - set up conversion from DMA to physical addresses
- * @dma_idx:	Top IOR_LSBITS bits of the DMA address, i.e. an index
- *		into the array _dma_to_phys.
- * @delta:	Value that, when added to the DMA address, will yield the
- *		physical address
- * @s:		Number of bytes in the section of memory with the given delta
- *		between DMA and physical addresses.
- */
-static void setup_dma_to_phys(dma_addr_t dma, phys_addr_t delta, dma_addr_t s)
-{
-	int dma_idx, first_idx, last_idx;
-	phys_addr_t first, last;
-
-	/*
-	 * Calculate the first and last indices, rounding the first up and
-	 * the second down.
-	 */
-	first = dma & ~IOR_DMA_GRAIN_MASK;
-	last = (dma + s - 1) & ~IOR_DMA_GRAIN_MASK;
-	first_idx = first >> IOR_LSBITS;		/* Convert to indices */
-	last_idx = last >> IOR_LSBITS;
-
-	for (dma_idx = first_idx; dma_idx <= last_idx; dma_idx++)
-		_ior_dma_to_phys[dma_idx].offset = delta >> IOR_DMA_SHIFT;
-}
-
-/**
- * setup_phys_to_dma - set up conversion from DMA to physical addresses
- * @phys_idx:	Top IOR_LSBITS bits of the DMA address, i.e. an index
- *		into the array _phys_to_dma.
- * @delta:	Value that, when added to the DMA address, will yield the
- *		physical address
- * @s:		Number of bytes in the section of memory with the given delta
- *		between DMA and physical addresses.
- */
-static void setup_phys_to_dma(phys_addr_t phys, dma_addr_t delta, phys_addr_t s)
-{
-	int phys_idx, first_idx, last_idx;
-	phys_addr_t first, last;
-
-	/*
-	 * Calculate the first and last indices, rounding the first up and
-	 * the second down.
-	 */
-	first = phys & ~IOR_PHYS_GRAIN_MASK;
-	last = (phys + s - 1) & ~IOR_PHYS_GRAIN_MASK;
-	first_idx = first >> IOR_LSBITS;		/* Convert to indices */
-	last_idx = last >> IOR_LSBITS;
-
-	for (phys_idx = first_idx; phys_idx <= last_idx; phys_idx++)
-		_ior_phys_to_dma[phys_idx].offset = delta >> IOR_PHYS_SHIFT;
-}
-
-/**
- * ioremap_add_map - add to the physical and DMA address conversion arrays
- * @phys:	Process's view of the address of the start of the memory chunk
- * @dma:	DMA address of the start of the memory chunk
- * @size:	Size, in bytes, of the chunk of memory
- *
- * NOTE: It might be obvious, but the assumption is that all @size bytes have
- * the same offset between the physical address and the DMA address.
- */
-void ioremap_add_map(phys_addr_t phys, phys_addr_t dma, phys_addr_t size)
-{
-	if (size == 0)
-		return;
-
-	if ((dma & IOR_DMA_GRAIN_MASK) != 0 ||
-		(phys & IOR_PHYS_GRAIN_MASK) != 0 ||
-		(size & IOR_PHYS_GRAIN_MASK) != 0)
-		pr_crit("Memory allocation must be in chunks of 0x%x bytes\n",
-			IOR_PHYS_GRAIN);
-
-	setup_dma_to_phys(dma, phys - dma, size);
-	setup_phys_to_dma(phys, dma - phys, size);
-}
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
deleted file mode 100644
index bc2f3ca..0000000
--- a/arch/mips/powertv/memory.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Apparently originally from arch/mips/malta-memory.c. Modified to work
- * with the PowerTV bootloader.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/pfn.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/sections.h>
-
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/ioremap.h>
-
-#include "init.h"
-
-/* Memory constants */
-#define KIBIBYTE(n)		((n) * 1024)	/* Number of kibibytes */
-#define MEBIBYTE(n)		((n) * KIBIBYTE(1024)) /* Number of mebibytes */
-#define DEFAULT_MEMSIZE		MEBIBYTE(128)	/* If no memsize provided */
-
-#define BLDR_SIZE	KIBIBYTE(256)		/* Memory reserved for bldr */
-#define RV_SIZE		MEBIBYTE(4)		/* Size of reset vector */
-
-#define LOW_MEM_END	0x20000000		/* Highest low memory address */
-#define BLDR_ALIAS	0x10000000		/* Bootloader address */
-#define RV_PHYS		0x1fc00000		/* Reset vector address */
-#define LOW_RAM_END	RV_PHYS			/* End of real RAM in low mem */
-
-/*
- * Very low-level conversion from processor physical address to device
- * DMA address for the first bank of memory.
- */
-#define PHYS_TO_DMA(paddr)	((paddr) + (CONFIG_LOW_RAM_DMA - LOW_RAM_ALIAS))
-
-unsigned long ptv_memsize;
-
-/*
- * struct low_mem_reserved - Items in low memory that are reserved
- * @start:	Physical address of item
- * @size:	Size, in bytes, of this item
- * @is_aliased: True if this is RAM aliased from another location. If false,
- *		it is something other than aliased RAM and the RAM in the
- *		unaliased address is still visible outside of low memory.
- */
-struct low_mem_reserved {
-	phys_addr_t	start;
-	phys_addr_t	size;
-	bool		is_aliased;
-};
-
-/*
- * Must be in ascending address order
- */
-struct low_mem_reserved low_mem_reserved[] = {
-	{BLDR_ALIAS, BLDR_SIZE, true},	/* Bootloader RAM */
-	{RV_PHYS, RV_SIZE, false},	/* Reset vector */
-};
-
-/*
- * struct mem_layout - layout of a piece of the system RAM
- * @phys:	Physical address of the start of this piece of RAM. This is the
- *		address at which both the processor and I/O devices see the
- *		RAM.
- * @alias:	Alias of this piece of memory in order to make it appear in
- *		the low memory part of the processor's address space. I/O
- *		devices don't see anything here.
- * @size:	Size, in bytes, of this piece of RAM
- */
-struct mem_layout {
-	phys_addr_t	phys;
-	phys_addr_t	alias;
-	phys_addr_t	size;
-};
-
-/*
- * struct mem_layout_list - list descriptor for layouts of system RAM pieces
- * @family:	Specifies the family being described
- * @n:		Number of &struct mem_layout elements
- * @layout:	Pointer to the list of &mem_layout structures
- */
-struct mem_layout_list {
-	enum family_type	family;
-	size_t			n;
-	struct mem_layout	*layout;
-};
-
-static struct mem_layout f1500_layout[] = {
-	{0x20000000, 0x10000000, MEBIBYTE(256)},
-};
-
-static struct mem_layout f4500_layout[] = {
-	{0x40000000, 0x10000000, MEBIBYTE(256)},
-	{0x20000000, 0x20000000, MEBIBYTE(32)},
-};
-
-static struct mem_layout f8500_layout[] = {
-	{0x40000000, 0x10000000, MEBIBYTE(256)},
-	{0x20000000, 0x20000000, MEBIBYTE(32)},
-	{0x30000000, 0x30000000, MEBIBYTE(32)},
-};
-
-static struct mem_layout fx600_layout[] = {
-	{0x20000000, 0x10000000, MEBIBYTE(256)},
-	{0x60000000, 0x60000000, MEBIBYTE(128)},
-};
-
-static struct mem_layout_list layout_list[] = {
-	{FAMILY_1500, ARRAY_SIZE(f1500_layout), f1500_layout},
-	{FAMILY_1500VZE, ARRAY_SIZE(f1500_layout), f1500_layout},
-	{FAMILY_1500VZF, ARRAY_SIZE(f1500_layout), f1500_layout},
-	{FAMILY_4500, ARRAY_SIZE(f4500_layout), f4500_layout},
-	{FAMILY_8500, ARRAY_SIZE(f8500_layout), f8500_layout},
-	{FAMILY_8500RNG, ARRAY_SIZE(f8500_layout), f8500_layout},
-	{FAMILY_4600, ARRAY_SIZE(fx600_layout), fx600_layout},
-	{FAMILY_4600VZA, ARRAY_SIZE(fx600_layout), fx600_layout},
-	{FAMILY_8600, ARRAY_SIZE(fx600_layout), fx600_layout},
-	{FAMILY_8600VZB, ARRAY_SIZE(fx600_layout), fx600_layout},
-};
-
-/* If we can't determine the layout, use this */
-static struct mem_layout default_layout[] = {
-	{0x20000000, 0x10000000, MEBIBYTE(128)},
-};
-
-/**
- * register_non_ram - register low memory not available for RAM usage
- */
-static __init void register_non_ram(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(low_mem_reserved); i++)
-		add_memory_region(low_mem_reserved[i].start,
-			low_mem_reserved[i].size, BOOT_MEM_RESERVED);
-}
-
-/**
- * get_memsize - get the size of memory as a single bank
- */
-static phys_addr_t get_memsize(void)
-{
-	static char cmdline[COMMAND_LINE_SIZE] __initdata;
-	phys_addr_t memsize = 0;
-	char *memsize_str;
-	char *ptr;
-
-	/* Check the command line first for a memsize directive */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-		ptr = strstr(ptr, " memsize=");
-
-	if (ptr) {
-		memsize = memparse(ptr + 8, &ptr);
-	} else {
-		/* otherwise look in the environment */
-		memsize_str = prom_getenv("memsize");
-
-		if (memsize_str != NULL) {
-			pr_info("prom memsize = %s\n", memsize_str);
-			memsize = simple_strtol(memsize_str, NULL, 0);
-		}
-
-		if (memsize == 0) {
-			if (_prom_memsize != 0) {
-				memsize = _prom_memsize;
-				pr_info("_prom_memsize = 0x%x\n", memsize);
-				/* add in memory that the bootloader doesn't
-				 * report */
-				memsize += BLDR_SIZE;
-			} else {
-				memsize = DEFAULT_MEMSIZE;
-				pr_info("Memsize not passed by bootloader, "
-					"defaulting to 0x%x\n", memsize);
-			}
-		}
-	}
-
-	return memsize;
-}
-
-/**
- * register_low_ram - register an aliased section of RAM
- * @p:		Alias address of memory
- * @n:		Number of bytes in this section of memory
- *
- * Returns the number of bytes registered
- *
- */
-static __init phys_addr_t register_low_ram(phys_addr_t p, phys_addr_t n)
-{
-	phys_addr_t s;
-	int i;
-	phys_addr_t orig_n;
-
-	orig_n = n;
-
-	BUG_ON(p + n > RV_PHYS);
-
-	for (i = 0; n != 0 && i < ARRAY_SIZE(low_mem_reserved); i++) {
-		phys_addr_t start;
-		phys_addr_t size;
-
-		start = low_mem_reserved[i].start;
-		size = low_mem_reserved[i].size;
-
-		/* Handle memory before this low memory section */
-		if (p < start) {
-			phys_addr_t s;
-			s = min(n, start - p);
-			add_memory_region(p, s, BOOT_MEM_RAM);
-			p += s;
-			n -= s;
-		}
-
-		/* Handle the low memory section itself. If it's aliased,
-		 * we reduce the number of byes left, but if not, the RAM
-		 * is available elsewhere and we don't reduce the number of
-		 * bytes remaining. */
-		if (p == start) {
-			if (low_mem_reserved[i].is_aliased) {
-				s = min(n, size);
-				n -= s;
-				p += s;
-			} else
-				p += n;
-		}
-	}
-
-	return orig_n - n;
-}
-
-/*
- * register_ram - register real RAM
- * @p:	Address of memory as seen by devices
- * @alias:	If the memory is seen at an additional address by the processor,
- *		this will be the address, otherwise it is the same as @p.
- * @n:		Number of bytes in this section of memory
- */
-static __init void register_ram(phys_addr_t p, phys_addr_t alias,
-	phys_addr_t n)
-{
-	/*
-	 * If some or all of this memory has an alias, break it into the
-	 * aliased and non-aliased portion.
-	 */
-	if (p != alias) {
-		phys_addr_t alias_size;
-		phys_addr_t registered;
-
-		alias_size = min(n, LOW_RAM_END - alias);
-		registered = register_low_ram(alias, alias_size);
-		ioremap_add_map(alias, p, n);
-		n -= registered;
-		p += registered;
-	}
-
-#ifdef CONFIG_HIGHMEM
-	if (n != 0) {
-		add_memory_region(p, n, BOOT_MEM_RAM);
-		ioremap_add_map(p, p, n);
-	}
-#endif
-}
-
-/**
- * register_address_space - register things in the address space
- * @memsize:	Number of bytes of RAM installed
- *
- * Takes the given number of bytes of RAM and registers as many of the regions,
- * or partial regions, as it can. So, the default configuration might have
- * two regions with 256 MiB each. If the memsize passed in on the command line
- * is 384 MiB, it will register the first region with 256 MiB and the second
- * with 128 MiB.
- */
-static __init void register_address_space(phys_addr_t memsize)
-{
-	int i;
-	phys_addr_t size;
-	size_t n;
-	struct mem_layout *layout;
-	enum family_type family;
-
-	/*
-	 * Register all of the things that aren't available to the kernel as
-	 * memory.
-	 */
-	register_non_ram();
-
-	/* Find the appropriate memory description */
-	family = platform_get_family();
-
-	for (i = 0; i < ARRAY_SIZE(layout_list); i++) {
-		if (layout_list[i].family == family)
-			break;
-	}
-
-	if (i == ARRAY_SIZE(layout_list)) {
-		n = ARRAY_SIZE(default_layout);
-		layout = default_layout;
-	} else {
-		n = layout_list[i].n;
-		layout = layout_list[i].layout;
-	}
-
-	for (i = 0; memsize != 0 && i < n; i++) {
-		size = min(memsize, layout[i].size);
-		register_ram(layout[i].phys, layout[i].alias, size);
-		memsize -= size;
-	}
-}
-
-void __init prom_meminit(void)
-{
-	ptv_memsize = get_memsize();
-	register_address_space(ptv_memsize);
-}
-
-void __init prom_free_prom_memory(void)
-{
-	unsigned long addr;
-	int i;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-			continue;
-
-		addr = boot_mem_map.map[i].addr;
-		free_init_pages("prom memory",
-				addr, addr + boot_mem_map.map[i].size);
-	}
-}
diff --git a/arch/mips/powertv/pci/Makefile b/arch/mips/powertv/pci/Makefile
deleted file mode 100644
index 2610a6a..0000000
--- a/arch/mips/powertv/pci/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2009  Scientific-Atlanta, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-#
-
-obj-$(CONFIG_PCI)	+= fixup-powertv.o
diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c
deleted file mode 100644
index d7ecbae..0000000
--- a/arch/mips/powertv/pci/fixup-powertv.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <asm/mach-powertv/interrupts.h>
-#include "powertv-pci.h"
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return asic_pcie_map_irq(dev, slot, pin);
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-/*
- * asic_pcie_map_irq
- *
- * Parameters:
- * *dev - pointer to a pci_dev structure  (not used)
- * slot - slot number  (not used)
- * pin - pin number  (not used)
- *
- * Return Value:
- * Returns: IRQ number (always the PCI Express IRQ number)
- *
- * Description:
- * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt.
- *
- */
-int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_pciexp;
-}
-EXPORT_SYMBOL(asic_pcie_map_irq);
diff --git a/arch/mips/powertv/pci/powertv-pci.h b/arch/mips/powertv/pci/powertv-pci.h
deleted file mode 100644
index 1b5886b..0000000
--- a/arch/mips/powertv/pci/powertv-pci.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *				powertv-pci.c
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-/*
- * Local definitions for the powertv PCI code
- */
-
-#ifndef _POWERTV_PCI_POWERTV_PCI_H_
-#define _POWERTV_PCI_POWERTV_PCI_H_
-extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-extern int asic_pcie_init(void);
-extern int asic_pcie_init(void);
-
-extern int log_level;
-#endif
diff --git a/arch/mips/powertv/powertv-clock.h b/arch/mips/powertv/powertv-clock.h
deleted file mode 100644
index d94c543..0000000
--- a/arch/mips/powertv/powertv-clock.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Author: David VomLehn
- */
-
-#ifndef _POWERTV_POWERTV_CLOCK_H
-#define _POWERTV_POWERTV_CLOCK_H
-extern int powertv_clockevent_init(void);
-extern void powertv_clocksource_init(void);
-extern unsigned int mips_get_pll_freq(void);
-#endif
diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c
deleted file mode 100644
index d845eac..0000000
--- a/arch/mips/powertv/powertv-usb.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- *				powertv-usb.c
- *
- * Description:	 ASIC-specific USB device setup and shutdown
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- * Copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/interrupts.h>
-
-/* misc_clk_ctl1 values */
-#define MCC1_30MHZ_POWERUP_SELECT	(1 << 14)
-#define MCC1_DIV9			(1 << 13)
-#define MCC1_ETHMIPS_POWERUP_SELECT	(1 << 11)
-#define MCC1_USB_POWERUP_SELECT		(1 << 1)
-#define MCC1_CLOCK108_POWERUP_SELECT	(1 << 0)
-
-/* Possible values for clock select */
-#define MCC1_USB_CLOCK_HIGH_Z		(0 << 4)
-#define MCC1_USB_CLOCK_48MHZ		(1 << 4)
-#define MCC1_USB_CLOCK_24MHZ		(2 << 4)
-#define MCC1_USB_CLOCK_6MHZ		(3 << 4)
-
-#define MCC1_CONFIG	(MCC1_30MHZ_POWERUP_SELECT |		\
-			 MCC1_DIV9 |				\
-			 MCC1_ETHMIPS_POWERUP_SELECT |		\
-			 MCC1_USB_POWERUP_SELECT |		\
-			 MCC1_CLOCK108_POWERUP_SELECT)
-
-/* misc_clk_ctl2 values */
-#define MCC2_GMII_GCLK_TO_PAD		(1 << 31)
-#define MCC2_ETHER125_0_CLOCK_SELECT	(1 << 29)
-#define MCC2_RMII_0_CLOCK_SELECT	(1 << 28)
-#define MCC2_GMII_TX0_CLOCK_SELECT	(1 << 27)
-#define MCC2_GMII_RX0_CLOCK_SELECT	(1 << 26)
-#define MCC2_ETHER125_1_CLOCK_SELECT	(1 << 24)
-#define MCC2_RMII_1_CLOCK_SELECT	(1 << 23)
-#define MCC2_GMII_TX1_CLOCK_SELECT	(1 << 22)
-#define MCC2_GMII_RX1_CLOCK_SELECT	(1 << 21)
-#define MCC2_ETHER125_2_CLOCK_SELECT	(1 << 19)
-#define MCC2_RMII_2_CLOCK_SELECT	(1 << 18)
-#define MCC2_GMII_TX2_CLOCK_SELECT	(1 << 17)
-#define MCC2_GMII_RX2_CLOCK_SELECT	(1 << 16)
-
-#define ETHER_CLK_CONFIG	(MCC2_GMII_GCLK_TO_PAD |	\
-				 MCC2_ETHER125_0_CLOCK_SELECT | \
-				 MCC2_RMII_0_CLOCK_SELECT |	\
-				 MCC2_GMII_TX0_CLOCK_SELECT |	\
-				 MCC2_GMII_RX0_CLOCK_SELECT |	\
-				 MCC2_ETHER125_1_CLOCK_SELECT | \
-				 MCC2_RMII_1_CLOCK_SELECT |	\
-				 MCC2_GMII_TX1_CLOCK_SELECT |	\
-				 MCC2_GMII_RX1_CLOCK_SELECT |	\
-				 MCC2_ETHER125_2_CLOCK_SELECT | \
-				 MCC2_RMII_2_CLOCK_SELECT |	\
-				 MCC2_GMII_TX2_CLOCK_SELECT |	\
-				 MCC2_GMII_RX2_CLOCK_SELECT)
-
-/* misc_clk_ctl2 definitions for Gaia */
-#define FSX4A_REF_SELECT		(1 << 16)
-#define FSX4B_REF_SELECT		(1 << 17)
-#define FSX4C_REF_SELECT		(1 << 18)
-#define DDR_PLL_REF_SELECT		(1 << 19)
-#define MIPS_PLL_REF_SELECT		(1 << 20)
-
-/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */
-#define QAM_FS_SDIV_SHIFT		29
-#define QAM_FS_MD_SHIFT			24
-#define QAM_FS_MD_MASK			0x1f	/* Cut down to 5 bits */
-#define QAM_FS_PE_SHIFT			8
-
-#define QAM_FS_DISABLE_DIVIDE_BY_3		(1 << 5)
-#define QAM_FS_ENABLE_PROGRAM			(1 << 4)
-#define QAM_FS_ENABLE_OUTPUT			(1 << 3)
-#define QAM_FS_SELECT_TEST_BYPASS		(1 << 2)
-#define QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)
-#define QAM_FS_CHOOSE_FS			(1 << 0)
-
-/* Definitions for fs432x4a_ctl register */
-#define QAM_FS_NSDIV_54MHZ			(1 << 2)
-
-/* Definitions for bcm1_usb2_ctl register */
-#define BCM1_USB2_CTL_BISTOK				(1 << 11)
-#define BCM1_USB2_CTL_PORT2_SHIFT_JK			(1 << 7)
-#define BCM1_USB2_CTL_PORT1_SHIFT_JK			(1 << 6)
-#define BCM1_USB2_CTL_PORT2_FAST_EDGE			(1 << 5)
-#define BCM1_USB2_CTL_PORT1_FAST_EDGE			(1 << 4)
-#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH		(1 << 1)
-#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH	(1 << 0)
-
-/* Definitions for crt_spare register */
-#define CRT_SPARE_PORT2_SHIFT_JK			(1 << 21)
-#define CRT_SPARE_PORT1_SHIFT_JK			(1 << 20)
-#define CRT_SPARE_PORT2_FAST_EDGE			(1 << 19)
-#define CRT_SPARE_PORT1_FAST_EDGE			(1 << 18)
-#define CRT_SPARE_DIVIDE_BY_9_FROM_432			(1 << 17)
-#define CRT_SPARE_USB_DIVIDE_BY_9			(1 << 16)
-
-/* Definitions for usb2_stbus_obc register */
-#define USB_STBUS_OBC_STORE32_LOAD32			0x3
-
-/* Definitions for usb2_stbus_mess_size register */
-#define USB2_STBUS_MESS_SIZE_2				0x1	/* 2 packets */
-
-/* Definitions for usb2_stbus_chunk_size register */
-#define USB2_STBUS_CHUNK_SIZE_2				0x1	/* 2 packets */
-
-/* Definitions for usb2_strap register */
-#define USB2_STRAP_HFREQ_SELECT				0x1
-
-/*
- * USB Host Resource Definition
- */
-
-static struct resource ehci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start	= 0,
-		.end	= 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= irq_usbehci,
-		.end	= irq_usbehci,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ehci_dmamask = 0xffffffffULL;
-
-static struct platform_device ehci_device = {
-	.name = "powertv-ehci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ehci_resources,
-	.dev = {
-		.dma_mask = &ehci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct resource ohci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start	= 0,
-		.end	= 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= irq_usbohci,
-		.end	= irq_usbohci,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ohci_dmamask = 0xffffffffULL;
-
-static struct platform_device ohci_device = {
-	.name = "powertv-ohci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ohci_resources,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static unsigned usb_users;
-static DEFINE_SPINLOCK(usb_regs_lock);
-
-/*
- *
- * fs_update - set frequency synthesizer for USB
- * @pe_bits		Phase tap setting
- * @md_bits		Coarse selector bus for algorithm of phase tap
- * @sdiv_bits		Output divider setting
- * @disable_div_by_3	Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero
- * @standby		Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero
- *
- * QAM frequency selection code, which affects the frequency at which USB
- * runs. The frequency is calculated as:
- *			       2^15 * ndiv * Fin
- * Fout = ------------------------------------------------------------
- *	  (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
- * where:
- * Fin		54 MHz
- * ndiv		QAM_FS_NSDIV_54MHZ ? 8 : 16
- * sdiv		1 << (sdiv_bits + 1)
- * ipe		Same as pe_bits
- * md		A five-bit, two's-complement integer (range [-16, 15]), which
- *		is the lower 5 bits of md_bits.
- */
-static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits,
-	u32 disable_div_by_3, u32 standby)
-{
-	u32 val;
-
-	val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) |
-		((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) |
-		(pe_bits << QAM_FS_PE_SHIFT) |
-		QAM_FS_ENABLE_OUTPUT |
-		standby |
-		disable_div_by_3);
-	asic_write(val, fs432x4b4_usb_ctl);
-	asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl);
-	asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS,
-		fs432x4b4_usb_ctl);
-}
-
-/*
- * usb_eye_configure - for optimizing the shape USB eye waveform
- * @set:	Bits to set in the register
- * @clear:	Bits to clear in the register; each bit with a one will
- *		be set in the register, zero bits will not be modified
- */
-static void usb_eye_configure(u32 set, u32 clear)
-{
-	u32 old;
-
-	old = asic_read(crt_spare);
-	old |= set;
-	old &= ~clear;
-	asic_write(old, crt_spare);
-}
-
-/*
- * platform_configure_usb - usb configuration based on platform type.
- */
-static void platform_configure_usb(void)
-{
-	u32 bcm1_usb2_ctl_value;
-	enum asic_type asic_type;
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb_regs_lock, flags);
-	usb_users++;
-
-	if (usb_users != 1) {
-		spin_unlock_irqrestore(&usb_regs_lock, flags);
-		return;
-	}
-
-	asic_type = platform_get_asic();
-
-	switch (asic_type) {
-	case ASIC_ZEUS:
-		fs_update(0x0000, -15, 0x02, 0, 0);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_CRONUS:
-	case ASIC_CRONUSLITE:
-		usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9);
-		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_CALLIOPE:
-		fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-
-		switch (platform_get_family()) {
-		case FAMILY_1500VZE:
-			break;
-
-		case FAMILY_1500VZF:
-			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
-				CRT_SPARE_PORT1_SHIFT_JK |
-				CRT_SPARE_PORT2_FAST_EDGE |
-				CRT_SPARE_PORT1_FAST_EDGE, 0);
-			break;
-
-		default:
-			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
-				CRT_SPARE_PORT1_SHIFT_JK, 0);
-			break;
-		}
-
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
-			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_GAIA:
-		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
-			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	default:
-		pr_err("Unknown ASIC type: %d\n", asic_type);
-		bcm1_usb2_ctl_value = 0;
-		break;
-	}
-
-	/* turn on USB power */
-	asic_write(0, usb2_strap);
-	/* Enable all OHCI interrupts */
-	asic_write(bcm1_usb2_ctl_value, usb2_control);
-	/* usb2_stbus_obc store32/load32 */
-	asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc);
-	/* usb2_stbus_mess_size 2 packets */
-	asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size);
-	/* usb2_stbus_chunk_size 2 packets */
-	asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size);
-	spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-static void platform_unconfigure_usb(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb_regs_lock, flags);
-	usb_users--;
-	if (usb_users == 0)
-		asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap);
-	spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-/*
- * Set up the USB EHCI interface
- */
-void platform_configure_usb_ehci()
-{
-	platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ehci);
-
-/*
- * Set up the USB OHCI interface
- */
-void platform_configure_usb_ohci()
-{
-	platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ohci);
-
-/*
- * Shut the USB EHCI interface down
- */
-void platform_unconfigure_usb_ehci()
-{
-	platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ehci);
-
-/*
- * Shut the USB OHCI interface down
- */
-void platform_unconfigure_usb_ohci()
-{
-	platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ohci);
-
-/**
- * platform_devices_init - sets up USB device resourse.
- */
-int __init platform_usb_devices_init(struct platform_device **ehci_dev,
-	struct platform_device **ohci_dev)
-{
-	*ehci_dev = &ehci_device;
-	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
-	ehci_resources[0].end += ehci_resources[0].start;
-
-	*ohci_dev = &ohci_device;
-	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
-	ohci_resources[0].end += ohci_resources[0].start;
-
-	return 0;
-}
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
deleted file mode 100644
index 24689bf..0000000
--- a/arch/mips/powertv/powertv_setup.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/screen_info.h>
-#include <linux/notifier.h>
-#include <linux/etherdevice.h>
-#include <linux/if_ether.h>
-#include <linux/ctype.h>
-#include <linux/cpu.h>
-#include <linux/time.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/dma.h>
-#include <asm/asm.h>
-#include <asm/traps.h>
-#include <asm/asm-offsets.h>
-#include "reset.h"
-
-#define VAL(n)		STR(n)
-
-/*
- * Macros for loading addresses and storing registers:
- * LONG_L_	Stringified version of LONG_L for use in asm() statement
- * LONG_S_	Stringified version of LONG_S for use in asm() statement
- * PTR_LA_	Stringified version of PTR_LA for use in asm() statement
- * REG_SIZE	Number of 8-bit bytes in a full width register
- */
-#define LONG_L_		VAL(LONG_L) " "
-#define LONG_S_		VAL(LONG_S) " "
-#define PTR_LA_		VAL(PTR_LA) " "
-
-#ifdef CONFIG_64BIT
-#warning TODO: 64-bit code needs to be verified
-#define REG_SIZE	"8"		/* In bytes */
-#endif
-
-#ifdef CONFIG_32BIT
-#define REG_SIZE	"4"		/* In bytes */
-#endif
-
-static void register_panic_notifier(void);
-static int panic_handler(struct notifier_block *notifier_block,
-	unsigned long event, void *cause_string);
-
-const char *get_system_type(void)
-{
-	return "PowerTV";
-}
-
-void __init plat_mem_setup(void)
-{
-	panic_on_oops = 1;
-	register_panic_notifier();
-
-#if 0
-	mips_pcibios_init();
-#endif
-	mips_reboot_setup();
-}
-
-/*
- * Install a panic notifier for platform-specific diagnostics
- */
-static void register_panic_notifier()
-{
-	static struct notifier_block panic_notifier = {
-		.notifier_call = panic_handler,
-		.next = NULL,
-		.priority	= INT_MAX
-	};
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier);
-}
-
-static int panic_handler(struct notifier_block *notifier_block,
-	unsigned long event, void *cause_string)
-{
-	struct pt_regs	my_regs;
-
-	/* Save all of the registers */
-	{
-		unsigned long	at, v0, v1; /* Must be on the stack */
-
-		/* Start by saving $at and v0 on the stack. We use $at
-		 * ourselves, but it looks like the compiler may use v0 or v1
-		 * to load the address of the pt_regs structure. We'll come
-		 * back later to store the registers in the pt_regs
-		 * structure. */
-		__asm__ __volatile__ (
-			".set	noat\n"
-			LONG_S_		"$at, %[at]\n"
-			LONG_S_		"$2, %[v0]\n"
-			LONG_S_		"$3, %[v1]\n"
-		:
-			[at] "=m" (at),
-			[v0] "=m" (v0),
-			[v1] "=m" (v1)
-		:
-		:	"at"
-		);
-
-		__asm__ __volatile__ (
-			".set	noat\n"
-			"move		$at, %[pt_regs]\n"
-
-			/* Argument registers */
-			LONG_S_		"$4, " VAL(PT_R4) "($at)\n"
-			LONG_S_		"$5, " VAL(PT_R5) "($at)\n"
-			LONG_S_		"$6, " VAL(PT_R6) "($at)\n"
-			LONG_S_		"$7, " VAL(PT_R7) "($at)\n"
-
-			/* Temporary regs */
-			LONG_S_		"$8, " VAL(PT_R8) "($at)\n"
-			LONG_S_		"$9, " VAL(PT_R9) "($at)\n"
-			LONG_S_		"$10, " VAL(PT_R10) "($at)\n"
-			LONG_S_		"$11, " VAL(PT_R11) "($at)\n"
-			LONG_S_		"$12, " VAL(PT_R12) "($at)\n"
-			LONG_S_		"$13, " VAL(PT_R13) "($at)\n"
-			LONG_S_		"$14, " VAL(PT_R14) "($at)\n"
-			LONG_S_		"$15, " VAL(PT_R15) "($at)\n"
-
-			/* "Saved" registers */
-			LONG_S_		"$16, " VAL(PT_R16) "($at)\n"
-			LONG_S_		"$17, " VAL(PT_R17) "($at)\n"
-			LONG_S_		"$18, " VAL(PT_R18) "($at)\n"
-			LONG_S_		"$19, " VAL(PT_R19) "($at)\n"
-			LONG_S_		"$20, " VAL(PT_R20) "($at)\n"
-			LONG_S_		"$21, " VAL(PT_R21) "($at)\n"
-			LONG_S_		"$22, " VAL(PT_R22) "($at)\n"
-			LONG_S_		"$23, " VAL(PT_R23) "($at)\n"
-
-			/* Add'l temp regs */
-			LONG_S_		"$24, " VAL(PT_R24) "($at)\n"
-			LONG_S_		"$25, " VAL(PT_R25) "($at)\n"
-
-			/* Kernel temp regs */
-			LONG_S_		"$26, " VAL(PT_R26) "($at)\n"
-			LONG_S_		"$27, " VAL(PT_R27) "($at)\n"
-
-			/* Global pointer, stack pointer, frame pointer and
-			 * return address */
-			LONG_S_		"$gp, " VAL(PT_R28) "($at)\n"
-			LONG_S_		"$sp, " VAL(PT_R29) "($at)\n"
-			LONG_S_		"$fp, " VAL(PT_R30) "($at)\n"
-			LONG_S_		"$ra, " VAL(PT_R31) "($at)\n"
-
-			/* Now we can get the $at and v0 registers back and
-			 * store them */
-			LONG_L_		"$8, %[at]\n"
-			LONG_S_		"$8, " VAL(PT_R1) "($at)\n"
-			LONG_L_		"$8, %[v0]\n"
-			LONG_S_		"$8, " VAL(PT_R2) "($at)\n"
-			LONG_L_		"$8, %[v1]\n"
-			LONG_S_		"$8, " VAL(PT_R3) "($at)\n"
-		:
-		:
-			[at] "m" (at),
-			[v0] "m" (v0),
-			[v1] "m" (v1),
-			[pt_regs] "r" (&my_regs)
-		:	"at", "t0"
-		);
-
-		/* Set the current EPC value to be the current location in this
-		 * function */
-		__asm__ __volatile__ (
-			".set	noat\n"
-		"1:\n"
-			PTR_LA_		"$at, 1b\n"
-			LONG_S_		"$at, %[cp0_epc]\n"
-		:
-			[cp0_epc] "=m" (my_regs.cp0_epc)
-		:
-		:	"at"
-		);
-
-		my_regs.cp0_cause = read_c0_cause();
-		my_regs.cp0_status = read_c0_status();
-	}
-
-	pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... "
-		"zzzz... \n");
-
-	return NOTIFY_DONE;
-}
-
-/* Information about the RF MAC address, if one was supplied on the
- * command line. */
-static bool have_rfmac;
-static u8 rfmac[ETH_ALEN];
-
-static int rfmac_param(char *p)
-{
-	u8	*q;
-	bool	is_high_nibble;
-	int	c;
-
-	/* Skip a leading "0x", if present */
-	if (*p == '0' && *(p+1) == 'x')
-		p += 2;
-
-	q = rfmac;
-	is_high_nibble = true;
-
-	for (c = (unsigned char) *p++;
-		isxdigit(c) && q - rfmac < ETH_ALEN;
-		c = (unsigned char) *p++) {
-		int	nibble;
-
-		nibble = (isdigit(c) ? (c - '0') :
-			(isupper(c) ? c - 'A' + 10 : c - 'a' + 10));
-
-		if (is_high_nibble)
-			*q = nibble << 4;
-		else
-			*q++ |= nibble;
-
-		is_high_nibble = !is_high_nibble;
-	}
-
-	/* If we parsed all the way to the end of the parameter value and
-	 * parsed all ETH_ALEN bytes, we have a usable RF MAC address */
-	have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN);
-
-	return 0;
-}
-
-early_param("rfmac", rfmac_param);
-
-/*
- * Generate an Ethernet MAC address that has a good chance of being unique.
- * @addr:	Pointer to six-byte array containing the Ethernet address
- * Generates an Ethernet MAC address that is highly likely to be unique for
- * this particular system on a network with other systems of the same type.
- *
- * The problem we are solving is that, when eth_random_addr() is used to
- * generate MAC addresses at startup, there isn't much entropy for the random
- * number generator to use and the addresses it produces are fairly likely to
- * be the same as those of other identical systems on the same local network.
- * This is true even for relatively small numbers of systems (for the reason
- * why, see the Wikipedia entry for "Birthday problem" at:
- *	http://en.wikipedia.org/wiki/Birthday_problem
- *
- * The good news is that we already have a MAC address known to be unique, the
- * RF MAC address. The bad news is that this address is already in use on the
- * RF interface. Worse, the obvious trick, taking the RF MAC address and
- * turning on the locally managed bit, has already been used for other devices.
- * Still, this does give us something to work with.
- *
- * The approach we take is:
- * 1.	If we can't get the RF MAC Address, just call eth_random_addr.
- * 2.	Use the 24-bit NIC-specific bits of the RF MAC address as the last 24
- *	bits of the new address. This is very likely to be unique, except for
- *	the current box.
- * 3.	To avoid using addresses already on the current box, we set the top
- *	six bits of the address with a value different from any currently
- *	registered Scientific Atlanta organizationally unique identifyer
- *	(OUI). This avoids duplication with any addresses on the system that
- *	were generated from valid Scientific Atlanta-registered address by
- *	simply flipping the locally managed bit.
- * 4.	We aren't generating a multicast address, so we leave the multicast
- *	bit off. Since we aren't using a registered address, we have to set
- *	the locally managed bit.
- * 5.	We then randomly generate the remaining 16-bits. This does two
- *	things:
- *	a.	It allows us to call this function for more than one device
- *		in this system
- *	b.	It ensures that things will probably still work even if
- *		some device on the device network has a locally managed
- *		address that matches the top six bits from step 2.
- */
-void platform_random_ether_addr(u8 addr[ETH_ALEN])
-{
-	const int num_random_bytes = 2;
-	const unsigned char non_sciatl_oui_bits = 0xc0u;
-	const unsigned char mac_addr_locally_managed = (1 << 1);
-
-	if (!have_rfmac) {
-		pr_warning("rfmac not available on command line; "
-			"generating random MAC address\n");
-		eth_random_addr(addr);
-	}
-
-	else {
-		int	i;
-
-		/* Set the first byte to something that won't match a Scientific
-		 * Atlanta OUI, is locally managed, and isn't a multicast
-		 * address */
-		addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed;
-
-		/* Get some bytes of random address information */
-		get_random_bytes(&addr[1], num_random_bytes);
-
-		/* Copy over the NIC-specific bits of the RF MAC address */
-		for (i = 1 + num_random_bytes; i < ETH_ALEN; i++)
-			addr[i] = rfmac[i];
-	}
-}
diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c
deleted file mode 100644
index 11c32fb..0000000
--- a/arch/mips/powertv/reset.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/pm.h>
-
-#include <linux/io.h>
-#include <asm/reboot.h>			/* Not included by linux/reboot.h */
-
-#include <asm/mach-powertv/asic_regs.h>
-#include "reset.h"
-
-static void mips_machine_restart(char *command)
-{
-	writel(0x1, asic_reg_addr(watchdog));
-}
-
-void mips_reboot_setup(void)
-{
-	_machine_restart = mips_machine_restart;
-}
diff --git a/arch/mips/powertv/reset.h b/arch/mips/powertv/reset.h
deleted file mode 100644
index 888fd09..0000000
--- a/arch/mips/powertv/reset.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Definitions from powertv reset.c file
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Author: David VomLehn
- */
-
-#ifndef _POWERTV_POWERTV_RESET_H
-#define _POWERTV_POWERTV_RESET_H
-extern void mips_reboot_setup(void);
-#endif
diff --git a/arch/mips/powertv/time.c b/arch/mips/powertv/time.c
deleted file mode 100644
index f38b0d4..0000000
--- a/arch/mips/powertv/time.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Setting up the clock on the MIPS boards.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/interrupts.h>
-#include <asm/time.h>
-
-#include "powertv-clock.h"
-
-unsigned int get_c0_compare_int(void)
-{
-	return irq_mips_timer;
-}
-
-void __init plat_time_init(void)
-{
-	powertv_clocksource_init();
-}
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
index bba0cdf..5d0983d 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -26,7 +26,7 @@
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
 	if (!clk)
-		panic("failed to add clock\n");
+		panic("failed to add clock");
 
 	clk->cl.dev_id = dev;
 	clk->cl.clk = clk;
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index d217509..a3ad56c 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -350,7 +350,7 @@
 		name = "MT7620A";
 		soc_info->compatible = "ralink,mt7620a-soc";
 	} else {
-		panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+		panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
 	}
 
 	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index ce38d11..15f21ea 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -108,7 +108,7 @@
 	strncpy(of_ids[1].compatible, "palmbus", len);
 
 	if (of_platform_populate(NULL, of_ids, NULL, NULL))
-		panic("failed to populate DT\n");
+		panic("failed to populate DT");
 
 	/* make sure ithat the reset controller is setup early */
 	ralink_rst_init();
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index ca7ee3a..bb82a82 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -276,7 +276,7 @@
 		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
 	} else {
-		panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+		panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
 	}
 
 	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
index e49241a..2027857 100644
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -126,7 +126,7 @@
 		return -ENOENT;
 	}
 
-	rt->membase = devm_request_and_ioremap(&pdev->dev, res);
+	rt->membase = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(rt->membase))
 		return PTR_ERR(rt->membase);
 
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index ad2ce8d..7dcde53 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -287,6 +287,9 @@
 	def_bool y
 	depends on COMPAT && SYSVIPC
 
+config AUDIT_ARCH
+	def_bool y
+
 config HPUX
 	bool "Support for HP-UX binaries"
 	depends on !64BIT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index e02f665..7187664 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -94,7 +94,7 @@
 	else echo $(obj)/palo.conf; \
 	fi)
 
-palo: vmlinuz
+palo lifimage: vmlinuz
 	@if test ! -x "$(PALO)"; then \
 		echo 'ERROR: Please install palo first (apt-get install palo)';\
 		echo 'or build it from source and install it somewhere in your $$PATH';\
@@ -109,16 +109,23 @@
 	fi
 	$(PALO) -f $(PALOCONF)
 
-# Shorthands for known targets not supported by parisc, use vmlinux/vmlinuz as default
+BOOT_TARGETS    = zImage Image palo lifimage
+INSTALL_TARGETS = zinstall install
+
+PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+
+bzImage zImage: vmlinuz
 Image: vmlinux
-zImage bzImage: vmlinuz
 
 vmlinuz: vmlinux
 	@gzip -cf -9 $< > $@
 
-install: vmlinuz
-	sh $(src)/arch/parisc/install.sh \
-			$(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
+install:
+	$(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
+			$(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
+zinstall:
+	$(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
+			$(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
 
 CLEAN_FILES	+= lifimage
 MRPROPER_FILES	+= palo.conf
@@ -127,10 +134,11 @@
 	@echo  '* vmlinux	- Uncompressed kernel image (./vmlinux)'
 	@echo  '  vmlinuz	- Compressed kernel image (./vmlinuz)'
 	@echo  '  palo		- Bootable image (./lifimage)'
-	@echo  '  install	- Install kernel using'
+	@echo  '  install	- Install uncompressed vmlinux kernel using'
 	@echo  '		  (your) ~/bin/$(INSTALLKERNEL) or'
 	@echo  '		  (distribution) /sbin/$(INSTALLKERNEL) or'
 	@echo  '		  copy to $$(INSTALL_PATH)'
+	@echo  '  zinstall	- Install compressed vmlinuz kernel'
 endef
 
 # we require gcc 3.3 or above to compile the kernel
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
new file mode 100644
index 0000000..33b148f
--- /dev/null
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -0,0 +1,328 @@
+CONFIG_LOCALVERSION="-32bit"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PA7100LC=y
+CONFIG_SMP=y
+CONFIG_HZ_100=y
+CONFIG_IOMMU_CCIO=y
+CONFIG_GSC_LASI=y
+CONFIG_GSC_WAX=y
+CONFIG_EISA=y
+CONFIG_PCI=y
+CONFIG_GSC_DINO=y
+CONFIG_PCI_LBA=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
+# CONFIG_PDC_CHASSIS is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_LLC2=m
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_NS87415=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_LASI700=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_ZALON=y
+CONFIG_SCSI_DH=y
+CONFIG_ATA=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+CONFIG_LASI_82596=y
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPPOE=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+CONFIG_KEYBOARD_HIL_OLD=m
+CONFIG_KEYBOARD_HIL=m
+CONFIG_MOUSE_SERIAL=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_LEGACY_PTY_COUNT=64
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_PRINTER=m
+CONFIG_PPDEV=m
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_HWMON is not set
+CONFIG_AGP=y
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_VOODOO1=m
+CONFIG_DUMMY_CONSOLE_COLUMNS=128
+CONFIG_DUMMY_CONSOLE_ROWS=48
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_HARMONY=m
+CONFIG_HIDRAW=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_AUXDISPLAY=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_RT=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_NFS_FS=m
+# CONFIG_NFS_V2 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_RT_MUTEX_TESTER=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_RCU_CPU_STALL_INFO=y
+CONFIG_LATENCYTOP=y
+CONFIG_LKDTM=m
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig
new file mode 100644
index 0000000..5874ceb
--- /dev/null
+++ b/arch/parisc/configs/generic-64bit_defconfig
@@ -0,0 +1,346 @@
+CONFIG_LOCALVERSION="-64bit"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PA8X00=y
+CONFIG_MLONGCALLS=y
+CONFIG_64BIT=y
+CONFIG_SMP=y
+# CONFIG_COMPACTION is not set
+CONFIG_HPPB=y
+CONFIG_IOMMU_CCIO=y
+CONFIG_GSC_LASI=y
+CONFIG_GSC_WAX=y
+CONFIG_PCI=y
+CONFIG_PCI_STUB=m
+CONFIG_PCI_IOV=y
+CONFIG_GSC_DINO=y
+CONFIG_PCI_LBA=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_DCB=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATAPI=y
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_NS87415=y
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_SCSI_ISCSI_ATTRS=y
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_LASI700=m
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_ZALON=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_DH=y
+CONFIG_ATA=y
+CONFIG_ATA_GENERIC=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_RAID=m
+CONFIG_DM_UEVENT=y
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_SAS=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+CONFIG_HP100=m
+CONFIG_E1000=y
+CONFIG_LASI_82596=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_HIL_OLD is not set
+# CONFIG_KEYBOARD_HIL is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_SERIO_SERPORT=m
+# CONFIG_HP_SDC is not set
+CONFIG_SERIO_RAW=m
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_NOZOMI=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_JSM=m
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_DEVICE_INTERFACE=y
+CONFIG_IPMI_SI=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_TCG_TPM=m
+CONFIG_TCG_ATMEL=m
+CONFIG_PTP_1588_CLOCK=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SSB=m
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_HTC_PASIC3=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_SM501=m
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_DRM_RADEON_UMS=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_MON=m
+CONFIG_USB_WUSB_CBAF=m
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_STAGING=y
+# CONFIG_NET_VENDOR_SILICOM is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_ISO9660_FS=y
+CONFIG_UDF_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SYSV_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V4=m
+CONFIG_NFS_V4_1=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_LIBCRC32C=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index 0da8482..b3069fd 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -515,5 +515,17 @@
 	nop	/* 7 */
 	.endm
 
+	/*
+	 * ASM_EXCEPTIONTABLE_ENTRY
+	 *
+	 * Creates an exception table entry.
+	 * Do not convert to a assembler macro. This won't work.
+	 */
+#define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr)	\
+	.section __ex_table,"aw"			!	\
+	ASM_ULONG_INSN	fault_addr, except_addr		!	\
+	.previous
+
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/parisc/include/asm/delay.h b/arch/parisc/include/asm/delay.h
index 912ee7e..08e58e6 100644
--- a/arch/parisc/include/asm/delay.h
+++ b/arch/parisc/include/asm/delay.h
@@ -1,15 +1,5 @@
-#ifndef _PARISC_DELAY_H
-#define _PARISC_DELAY_H
-
-#include <asm/special_insns.h>    /* for mfctl() */
-#include <asm/processor.h> /* for boot_cpu_data */
-
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines
- */
+#ifndef _ASM_PARISC_DELAY_H
+#define _ASM_PARISC_DELAY_H
 
 static __inline__ void __delay(unsigned long loops) {
 	asm volatile(
@@ -19,25 +9,14 @@
 		: "=r" (loops) : "0" (loops));
 }
 
-static __inline__ void __cr16_delay(unsigned long clocks) {
-	unsigned long start;
+extern void __udelay(unsigned long usecs);
+extern void __udelay_bad(unsigned long usecs);
 
-	/*
-	 * Note: Due to unsigned math, cr16 rollovers shouldn't be
-	 * a problem here. However, on 32 bit, we need to make sure
-	 * we don't pass in too big a value. The current default
-	 * value of MAX_UDELAY_MS should help prevent this.
-	 */
-
-	start = mfctl(16);
-	while ((mfctl(16) - start) < clocks)
-	    ;
+static inline void udelay(unsigned long usecs)
+{
+	if (__builtin_constant_p(usecs) && (usecs) > 20000)
+		__udelay_bad(usecs);
+	__udelay(usecs);
 }
 
-static __inline__ void __udelay(unsigned long usecs) {
-	__cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL));
-}
-
-#define udelay(n) __udelay(n)
-
-#endif /* defined(_PARISC_DELAY_H) */
+#endif /* _ASM_PARISC_DELAY_H */
diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
index 241c345..9b3bd03 100644
--- a/arch/parisc/include/asm/hardirq.h
+++ b/arch/parisc/include/asm/hardirq.h
@@ -21,7 +21,6 @@
 	unsigned int irq_stack_usage;
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
-	unsigned int irq_call_count;
 #endif
 	unsigned int irq_unaligned_count;
 	unsigned int irq_fpassist_count;
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index a2db278..3c3cb00 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -19,5 +19,9 @@
 #define user_stack_pointer(regs)	((regs)->gr[30])
 unsigned long profile_pc(struct pt_regs *);
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->gr[20];
+}
 
 #endif
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 540c88f..bc7cf12 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -59,6 +59,7 @@
 #define TIF_32BIT               4       /* 32 bit binary */
 #define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 #define TIF_SINGLESTEP		9	/* single stepping? */
 #define TIF_BLOCKSTEP		10	/* branch stepping? */
@@ -68,6 +69,7 @@
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_32BIT		(1 << TIF_32BIT)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
@@ -75,7 +77,7 @@
 #define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
                                  _TIF_NEED_RESCHED)
 #define _TIF_SYSCALL_TRACE_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP |	\
-				 _TIF_BLOCKSTEP)
+				 _TIF_BLOCKSTEP | _TIF_SYSCALL_AUDIT)
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index e0a8235..63f4dd0 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -4,11 +4,14 @@
 /*
  * User space memory access functions
  */
+#include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/errno.h>
 #include <asm-generic/uaccess-unaligned.h>
 
+#include <linux/sched.h>
+
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
 
@@ -33,12 +36,43 @@
 extern int __put_kernel_bad(void);
 extern int __put_user_bad(void);
 
-static inline long access_ok(int type, const void __user * addr,
-		unsigned long size)
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ */
+static inline int __range_not_ok(unsigned long addr, unsigned long size,
+				 unsigned long limit)
 {
-	return 1;
+	unsigned long __newaddr = addr + size;
+	return (__newaddr < addr || __newaddr > limit || size > limit);
 }
 
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size)					\
+(	__chk_user_ptr(addr),						\
+	!__range_not_ok((unsigned long) (__force void *) (addr),	\
+			size, user_addr_max())				\
+)
+
 #define put_user __put_user
 #define get_user __get_user
 
@@ -59,12 +93,13 @@
 /*
  * The exception table contains two values: the first is an address
  * for an instruction that is allowed to fault, and the second is
- * the address to the fixup routine. 
+ * the address to the fixup routine. Even on a 64bit kernel we could
+ * use a 32bit (unsigned int) address here.
  */
 
 struct exception_table_entry {
-	unsigned long insn;  /* address of insn that is allowed to fault.   */
-	long fixup;          /* fixup routine */
+	unsigned long insn;	/* address of insn that is allowed to fault. */
+	unsigned long fixup;	/* fixup routine */
 };
 
 #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
@@ -218,7 +253,11 @@
 /*
  * Complex access routines -- macros
  */
-#define user_addr_max() (~0UL)
+#ifdef CONFIG_COMPAT
+#define user_addr_max() (TASK_SIZE)
+#else
+#define user_addr_max() (DEFAULT_TASK_SIZE)
+#endif
 
 #define strnlen_user lstrnlen_user
 #define strlen_user(str) lstrnlen_user(str, 0x7fffffffL)
diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh
index 4da682b..6f68784 100644
--- a/arch/parisc/install.sh
+++ b/arch/parisc/install.sh
@@ -19,20 +19,48 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+if [ -n "${INSTALLKERNEL}" ]; then
+  if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+  if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+fi
 
 # Default install
 
-if [ -f $4/vmlinuz ]; then
-	mv $4/vmlinuz $4/vmlinuz.old
+if [ "$(basename $2)" = "zImage" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
 fi
 
-if [ -f $4/System.map ]; then
-	mv $4/System.map $4/System.old
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
 fi
+cat $2 > $4/$base-$1
 
-cat $2 > $4/vmlinuz
-cp $3 $4/System.map
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
+
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 66ee3f1..ff87b46 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -29,7 +29,9 @@
 obj-$(CONFIG_MODULES)	+= module.o
 obj-$(CONFIG_64BIT)	+= binfmt_elf32.o sys_parisc32.o signal32.o
 obj-$(CONFIG_STACKTRACE)+= stacktrace.o
+obj-$(CONFIG_AUDIT)	+= audit.o
+obj64-$(CONFIG_AUDIT)	+= compat_audit.o
 # only supported for PCX-W/U in 64-bit mode at the moment
-obj-$(CONFIG_64BIT)	+= perf.o perf_asm.o
+obj-$(CONFIG_64BIT)	+= perf.o perf_asm.o $(obj64-y)
 obj-$(CONFIG_FUNCTION_TRACER)		+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
diff --git a/arch/parisc/kernel/audit.c b/arch/parisc/kernel/audit.c
new file mode 100644
index 0000000..eb64a61
--- /dev/null
+++ b/arch/parisc/kernel/audit.c
@@ -0,0 +1,81 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+#ifdef CONFIG_COMPAT
+	if (arch == AUDIT_ARCH_PARISC)
+		return 1;
+#endif
+	return 0;
+}
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_COMPAT
+	extern int parisc32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_PARISC)
+		return parisc32_classify_syscall(syscall);
+#endif
+	switch (syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_COMPAT
+	extern __u32 parisc32_dir_class[];
+	extern __u32 parisc32_write_class[];
+	extern __u32 parisc32_read_class[];
+	extern __u32 parisc32_chattr_class[];
+	extern __u32 parisc32_signal_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, parisc32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, parisc32_read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, parisc32_dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR_32, parisc32_chattr_class);
+	audit_register_class(AUDIT_CLASS_SIGNAL_32, parisc32_signal_class);
+#endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+	audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
+	return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/parisc/kernel/compat_audit.c b/arch/parisc/kernel/compat_audit.c
new file mode 100644
index 0000000..c74478f6
--- /dev/null
+++ b/arch/parisc/kernel/compat_audit.c
@@ -0,0 +1,40 @@
+#include <asm/unistd.h>
+
+unsigned int parisc32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned int parisc32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned int parisc32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned int parisc32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+unsigned int parisc32_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int parisc32_classify_syscall(unsigned syscall)
+{
+	switch (syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 2e6443b..8ceac47 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -179,10 +179,6 @@
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count);
 	seq_puts(p, "  Rescheduling interrupts\n");
-	seq_printf(p, "%*s: ", prec, "CAL");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
-	seq_puts(p, "  Function call interrupts\n");
 #endif
 	seq_printf(p, "%*s: ", prec, "UAH");
 	for_each_online_cpu(j)
@@ -499,22 +495,9 @@
 	*irq_stack_in_use = 1;
 }
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	__u32 pending;
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	pending = local_softirq_pending();
-
-	if (pending)
-		execute_on_irq_stack(__do_softirq, 0);
-
-	local_irq_restore(flags);
+	execute_on_irq_stack(__do_softirq, 0);
 }
 #endif /* CONFIG_IRQSTACKS */
 
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 534abd4..e842ee2 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -19,6 +19,7 @@
 #include <linux/security.h>
 #include <linux/compat.h>
 #include <linux/signal.h>
+#include <linux/audit.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -267,11 +268,28 @@
 
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
+	long ret = 0;
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
 	    tracehook_report_syscall_entry(regs))
-		return -1L;
+		ret = -1L;
 
-	return regs->gr[20];
+#ifdef CONFIG_64BIT
+	if (!is_compat_task())
+		audit_syscall_entry(AUDIT_ARCH_PARISC64,
+			regs->gr[20],
+			regs->gr[26], regs->gr[25],
+			regs->gr[24], regs->gr[23]);
+	else
+#endif
+		audit_syscall_entry(AUDIT_ARCH_PARISC,
+			regs->gr[20] & 0xffffffff,
+			regs->gr[26] & 0xffffffff,
+			regs->gr[25] & 0xffffffff,
+			regs->gr[24] & 0xffffffff,
+			regs->gr[23] & 0xffffffff);
+
+	return ret ? : regs->gr[20];
 }
 
 void do_syscall_trace_exit(struct pt_regs *regs)
@@ -279,6 +297,8 @@
 	int stepping = test_thread_flag(TIF_SINGLESTEP) ||
 		test_thread_flag(TIF_BLOCKSTEP);
 
+	audit_syscall_exit(regs);
+
 	if (stepping || test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, stepping);
 }
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 7349a3f..72a3c65 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -318,8 +318,12 @@
 	pdc_stable_write(0x40, &osid, sizeof(osid));
 	
 	processor_init();
-	printk(KERN_INFO "CPU(s): %d x %s at %d.%06d MHz\n",
-			num_present_cpus(),
+#ifdef CONFIG_SMP
+	pr_info("CPU(s): %d out of %d %s at %d.%06d MHz online\n",
+		num_online_cpus(), num_present_cpus(),
+#else
+	pr_info("CPU(s): 1 x %s at %d.%06d MHz\n",
+#endif
 			boot_cpu_data.cpu_name,
 			boot_cpu_data.cpu_hz / 1000000,
 			boot_cpu_data.cpu_hz % 1000000	);
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 2b96602..ceda229 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -125,11 +125,6 @@
 	unsigned long ops;
 	unsigned long flags;
 
-	/* Count this now; we may make a call that never returns. */
-	inc_irq_stat(irq_call_count);
-
-	mb();	/* Order interrupt and bit testing. */
-
 	for (;;) {
 		spinlock_t *lock = &per_cpu(ipi_lock, this_cpu);
 		spin_lock_irqsave(lock, flags);
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index e767ab7..a63bb179 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -649,10 +649,8 @@
 	/* Two exception table entries, one for the load,
 	   the other for the store. Either return -EFAULT.
 	   Each of the entries must be relocated. */
-	.section __ex_table,"aw"
-	ASM_ULONG_INSN (1b - linux_gateway_page), (3b - linux_gateway_page)
-	ASM_ULONG_INSN (2b - linux_gateway_page), (3b - linux_gateway_page)
-	.previous
+	ASM_EXCEPTIONTABLE_ENTRY(1b-linux_gateway_page, 3b-linux_gateway_page)
+	ASM_EXCEPTIONTABLE_ENTRY(2b-linux_gateway_page, 3b-linux_gateway_page)
 
 
 	/* Make sure nothing else is placed on this page */
diff --git a/arch/parisc/lib/Makefile b/arch/parisc/lib/Makefile
index 5651536..8fa92b8 100644
--- a/arch/parisc/lib/Makefile
+++ b/arch/parisc/lib/Makefile
@@ -3,6 +3,6 @@
 #
 
 lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o \
-	   ucmpdi2.o
+	   ucmpdi2.o delay.o
 
 obj-y	:= iomap.o
diff --git a/arch/parisc/lib/delay.c b/arch/parisc/lib/delay.c
new file mode 100644
index 0000000..ec9255f
--- /dev/null
+++ b/arch/parisc/lib/delay.c
@@ -0,0 +1,73 @@
+/*
+ *	Precise Delay Loops for parisc
+ *
+ *	based on code by:
+ *	Copyright (C) 1993 Linus Torvalds
+ *	Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *	Copyright (C) 2008 Jiri Hladky <hladky _dot_ jiri _at_ gmail _dot_ com>
+ *
+ *	parisc implementation:
+ *	Copyright (C) 2013 Helge Deller <deller@gmx.de>
+ */
+
+
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/init.h>
+
+#include <asm/processor.h>
+#include <asm/delay.h>
+
+#include <asm/special_insns.h>    /* for mfctl() */
+#include <asm/processor.h> /* for boot_cpu_data */
+
+/* CR16 based delay: */
+static void __cr16_delay(unsigned long __loops)
+{
+	/*
+	 * Note: Due to unsigned math, cr16 rollovers shouldn't be
+	 * a problem here. However, on 32 bit, we need to make sure
+	 * we don't pass in too big a value. The current default
+	 * value of MAX_UDELAY_MS should help prevent this.
+	 */
+	u32 bclock, now, loops = __loops;
+	int cpu;
+
+	preempt_disable();
+	cpu = smp_processor_id();
+	bclock = mfctl(16);
+	for (;;) {
+		now = mfctl(16);
+		if ((now - bclock) >= loops)
+			break;
+
+		/* Allow RT tasks to run */
+		preempt_enable();
+		asm volatile("	nop\n");
+		barrier();
+		preempt_disable();
+
+		/*
+		 * It is possible that we moved to another CPU, and
+		 * since CR16's are per-cpu we need to calculate
+		 * that. The delay must guarantee that we wait "at
+		 * least" the amount of time. Being moved to another
+		 * CPU could make the wait longer but we just need to
+		 * make sure we waited long enough. Rebalance the
+		 * counter for this CPU.
+		 */
+		if (unlikely(cpu != smp_processor_id())) {
+			loops -= (now - bclock);
+			cpu = smp_processor_id();
+			bclock = mfctl(16);
+		}
+	}
+	preempt_enable();
+}
+
+
+void __udelay(unsigned long usecs)
+{
+	__cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL));
+}
+EXPORT_SYMBOL(__udelay);
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index 6f2d935..a512f07 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -88,9 +88,7 @@
 	ldo        1(%r25),%r25
 	.previous
 
-	.section __ex_table,"aw"
-	ASM_ULONG_INSN 1b,2b
-	.previous
+	ASM_EXCEPTIONTABLE_ENTRY(1b,2b)
 
 	.procend
 
@@ -129,10 +127,8 @@
 	copy        %r24,%r26    /* reset r26 so 0 is returned on fault */
 	.previous
 
-	.section __ex_table,"aw"
-	ASM_ULONG_INSN 1b,3b
-	ASM_ULONG_INSN 2b,3b
-	.previous
+	ASM_EXCEPTIONTABLE_ENTRY(1b,3b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,3b)
 
 	.procend
 
diff --git a/arch/parisc/math-emu/float.h b/arch/parisc/math-emu/float.h
index ce76f6d..7a51f97 100644
--- a/arch/parisc/math-emu/float.h
+++ b/arch/parisc/math-emu/float.h
@@ -484,7 +484,6 @@
  * |                                                     |G|L|E|U|X|
  * +-------+-------+-------+-------+-------+-------+-------+-------+
  */
-#define Allexception(object) (object)
 #define Greaterthanbit(object) Bitfield_extract( 27, 1,object)
 #define Lessthanbit(object) Bitfield_extract( 28, 1,object)
 #define Equalbit(object) Bitfield_extract( 29, 1,object)
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 0293588..7584a5d 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -142,6 +142,12 @@
 {
 	const struct exception_table_entry *fix;
 
+	/* If we only stored 32bit addresses in the exception table we can drop
+	 * out if we faulted on a 64bit address. */
+	if ((sizeof(regs->iaoq[0]) > sizeof(fix->insn))
+		&& (regs->iaoq[0] >> 32))
+			return 0;
+
 	fix = search_exception_tables(regs->iaoq[0]);
 	if (fix) {
 		struct exception_data *d;
@@ -274,12 +280,22 @@
 		}
 		show_regs(regs);
 #endif
-		/* FIXME: actually we need to get the signo and code correct */
-		si.si_signo = SIGSEGV;
+		switch (code) {
+		case 15:	/* Data TLB miss fault/Data page fault */
+		case 17:	/* NA data TLB miss / page fault */
+		case 18:	/* Unaligned access - PCXS only */
+			si.si_signo = SIGBUS;
+			si.si_code = BUS_ADRERR;
+			break;
+		case 16:	/* Non-access instruction TLB miss fault */
+		case 26:	/* PCXL: Data memory access rights trap */
+		default:
+			si.si_signo = SIGSEGV;
+			si.si_code = SEGV_MAPERR;
+		}
 		si.si_errno = 0;
-		si.si_code = SEGV_MAPERR;
 		si.si_addr = (void __user *) address;
-		force_sig_info(SIGSEGV, &si, current);
+		force_sig_info(si.si_signo, &si, current);
 		return;
 	}
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 38f3b7e..b365d5c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -138,6 +138,7 @@
 	select OLD_SIGSUSPEND
 	select OLD_SIGACTION if PPC32
 	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 
 config EARLY_PRINTK
 	bool
diff --git a/arch/powerpc/include/asm/uprobes.h b/arch/powerpc/include/asm/uprobes.h
index 2301602..75c6ecd 100644
--- a/arch/powerpc/include/asm/uprobes.h
+++ b/arch/powerpc/include/asm/uprobes.h
@@ -37,6 +37,7 @@
 struct arch_uprobe {
 	union {
 		u8	insn[MAX_UINSN_BYTES];
+		u8	ixol[MAX_UINSN_BYTES];
 		u32	ainsn;
 	};
 };
@@ -45,11 +46,4 @@
 	unsigned long	saved_trap_nr;
 };
 
-extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
-extern int  arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern int  arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
-extern int  arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
-extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
 #endif	/* _ASM_UPROBES_H */
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 16a7c23..1114d13 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -292,6 +292,7 @@
 		return rc;
 	return count;
 }
+static BUS_ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe);
 
 static ssize_t ibmebus_store_remove(struct bus_type *bus,
 				    const char *buf, size_t count)
@@ -317,13 +318,14 @@
 		return -ENODEV;
 	}
 }
+static BUS_ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove);
 
-
-static struct bus_attribute ibmebus_bus_attrs[] = {
-	__ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe),
-	__ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove),
-	__ATTR_NULL
+static struct attribute *ibmbus_bus_attrs[] = {
+	&bus_attr_probe.attr,
+	&bus_attr_remove.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(ibmbus_bus);
 
 static int ibmebus_bus_bus_match(struct device *dev, struct device_driver *drv)
 {
@@ -713,7 +715,7 @@
 struct bus_type ibmebus_bus_type = {
 	.name      = "ibmebus",
 	.uevent    = of_device_uevent_modalias,
-	.bus_attrs = ibmebus_bus_attrs,
+	.bus_groups = ibmbus_bus_groups,
 	.match     = ibmebus_bus_bus_match,
 	.probe     = ibmebus_bus_device_probe,
 	.remove    = ibmebus_bus_device_remove,
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index c7cb8c2..ba01656 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -594,7 +594,7 @@
 	}
 }
 
-static inline void do_softirq_onstack(void)
+void do_softirq_own_stack(void)
 {
 	struct thread_info *curtp, *irqtp;
 
@@ -612,21 +612,6 @@
 		set_bits(irqtp->flags, &curtp->flags);
 }
 
-void do_softirq(void)
-{
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending())
-		do_softirq_onstack();
-
-	local_irq_restore(flags);
-}
-
 irq_hw_number_t virq_to_hw(unsigned int virq)
 {
 	struct irq_data *irq_data = irq_get_irq_data(virq);
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index d38cc08..408956f 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -997,21 +997,36 @@
 /* sysfs bus functions and data structures for CMO */
 
 #define viobus_cmo_rd_attr(name)                                        \
-static ssize_t                                                          \
-viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+static ssize_t cmo_##name##_show(struct bus_type *bt, char *buf)        \
 {                                                                       \
 	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
-}
+}                                                                       \
+static BUS_ATTR_RO(cmo_##name)
 
 #define viobus_cmo_pool_rd_attr(name, var)                              \
 static ssize_t                                                          \
-viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+cmo_##name##_##var##_show(struct bus_type *bt, char *buf)               \
 {                                                                       \
 	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}                                                                       \
+static BUS_ATTR_RO(cmo_##name##_##var)
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+
+static ssize_t cmo_high_show(struct bus_type *bt, char *buf)
+{
+	return sprintf(buf, "%lu\n", vio_cmo.high);
 }
 
-static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
-                                     size_t count)
+static ssize_t cmo_high_store(struct bus_type *bt, const char *buf,
+			      size_t count)
 {
 	unsigned long flags;
 
@@ -1021,35 +1036,26 @@
 
 	return count;
 }
+static BUS_ATTR_RW(cmo_high);
 
-viobus_cmo_rd_attr(entitled);
-viobus_cmo_pool_rd_attr(reserve, size);
-viobus_cmo_pool_rd_attr(excess, size);
-viobus_cmo_pool_rd_attr(excess, free);
-viobus_cmo_rd_attr(spare);
-viobus_cmo_rd_attr(min);
-viobus_cmo_rd_attr(desired);
-viobus_cmo_rd_attr(curr);
-viobus_cmo_rd_attr(high);
-
-static struct bus_attribute vio_cmo_bus_attrs[] = {
-	__ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
-	__ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
-	__ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
-	__ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
-	__ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
-	__ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
-	__ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
-	__ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
-	__ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
-	       viobus_cmo_high_show, viobus_cmo_high_reset),
-	__ATTR_NULL
+static struct attribute *vio_bus_attrs[] = {
+	&bus_attr_cmo_entitled.attr,
+	&bus_attr_cmo_spare.attr,
+	&bus_attr_cmo_min.attr,
+	&bus_attr_cmo_desired.attr,
+	&bus_attr_cmo_curr.attr,
+	&bus_attr_cmo_high.attr,
+	&bus_attr_cmo_reserve_size.attr,
+	&bus_attr_cmo_excess_size.attr,
+	&bus_attr_cmo_excess_free.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(vio_bus);
 
 static void vio_cmo_sysfs_init(void)
 {
 	vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
-	vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+	vio_bus_type.bus_groups = vio_bus_groups;
 }
 #else /* CONFIG_PPC_SMLPAR */
 int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 7143793..f75d7e5 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -99,6 +99,7 @@
 	select CLONE_BACKWARDS2
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CPU_DEVICES if !SMP
+	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL_OLD
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
@@ -237,6 +238,67 @@
 
 endchoice
 
+config MARCH_G5_TUNE
+	def_bool TUNE_G5 || MARCH_G5 && TUNE_DEFAULT
+
+config MARCH_Z900_TUNE
+	def_bool TUNE_Z900 || MARCH_Z900 && TUNE_DEFAULT
+
+config MARCH_Z990_TUNE
+	def_bool TUNE_Z990 || MARCH_Z990 && TUNE_DEFAULT
+
+config MARCH_Z9_109_TUNE
+	def_bool TUNE_Z9_109 || MARCH_Z9_109 && TUNE_DEFAULT
+
+config MARCH_Z10_TUNE
+	def_bool TUNE_Z10 || MARCH_Z10 && TUNE_DEFAULT
+
+config MARCH_Z196_TUNE
+	def_bool TUNE_Z196 || MARCH_Z196 && TUNE_DEFAULT
+
+config MARCH_ZEC12_TUNE
+	def_bool TUNE_ZEC12 || MARCH_ZEC12 && TUNE_DEFAULT
+
+choice
+	prompt "Tune code generation"
+	default TUNE_DEFAULT
+	help
+	  Cause the compiler to tune (-mtune) the generated code for a machine.
+	  This will make the code run faster on the selected machine but
+	  somewhat slower on other machines.
+	  This option only changes how the compiler emits instructions, not the
+	  selection of instructions itself, so the resulting kernel will run on
+	  all other machines.
+
+config TUNE_DEFAULT
+	bool "Default"
+	help
+	  Tune the generated code for the target processor for which the kernel
+	  will be compiled.
+
+config TUNE_G5
+	bool "System/390 model G5 and G6"
+
+config TUNE_Z900
+	bool "IBM zSeries model z800 and z900"
+
+config TUNE_Z990
+	bool "IBM zSeries model z890 and z990"
+
+config TUNE_Z9_109
+	bool "IBM System z9"
+
+config TUNE_Z10
+	bool "IBM System z10"
+
+config TUNE_Z196
+	bool "IBM zEnterprise 114 and 196"
+
+config TUNE_ZEC12
+	bool "IBM zBC12 and zEC12"
+
+endchoice
+
 config 64BIT
 	def_bool y
 	prompt "64 bit kernel"
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index a7d68a4..874e6d6 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -35,13 +35,21 @@
 
 export LD_BFD
 
-cflags-$(CONFIG_MARCH_G5)   += $(call cc-option,-march=g5)
-cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900)
-cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990)
-cflags-$(CONFIG_MARCH_Z9_109) += $(call cc-option,-march=z9-109)
-cflags-$(CONFIG_MARCH_Z10) += $(call cc-option,-march=z10)
-cflags-$(CONFIG_MARCH_Z196) += $(call cc-option,-march=z196)
-cflags-$(CONFIG_MARCH_ZEC12) += $(call cc-option,-march=zEC12)
+cflags-$(CONFIG_MARCH_G5)     += -march=g5
+cflags-$(CONFIG_MARCH_Z900)   += -march=z900
+cflags-$(CONFIG_MARCH_Z990)   += -march=z990
+cflags-$(CONFIG_MARCH_Z9_109) += -march=z9-109
+cflags-$(CONFIG_MARCH_Z10)    += -march=z10
+cflags-$(CONFIG_MARCH_Z196)   += -march=z196
+cflags-$(CONFIG_MARCH_ZEC12)  += -march=zEC12
+
+cflags-$(CONFIG_MARCH_G5_TUNE)		+= -mtune=g5
+cflags-$(CONFIG_MARCH_Z900_TUNE)	+= -mtune=z900
+cflags-$(CONFIG_MARCH_Z990_TUNE)	+= -mtune=z990
+cflags-$(CONFIG_MARCH_Z9_109_TUNE)	+= -mtune=z9-109
+cflags-$(CONFIG_MARCH_Z10_TUNE)		+= -mtune=z10
+cflags-$(CONFIG_MARCH_Z196_TUNE)	+= -mtune=z196
+cflags-$(CONFIG_MARCH_ZEC12_TUNE)	+= -mtune=zEC12
 
 #KBUILD_IMAGE is necessary for make rpm
 KBUILD_IMAGE	:=arch/s390/boot/image
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 87a2209..4c4a1ce 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -48,9 +48,9 @@
  * /proc entries (sysctl)
  */
 static const char appldata_proc_name[APPLDATA_PROC_NAME_LENGTH] = "appldata";
-static int appldata_timer_handler(ctl_table *ctl, int write,
+static int appldata_timer_handler(struct ctl_table *ctl, int write,
 				  void __user *buffer, size_t *lenp, loff_t *ppos);
-static int appldata_interval_handler(ctl_table *ctl, int write,
+static int appldata_interval_handler(struct ctl_table *ctl, int write,
 					 void __user *buffer,
 					 size_t *lenp, loff_t *ppos);
 
@@ -201,10 +201,10 @@
  * Start/Stop timer, show status of timer (0 = not active, 1 = active)
  */
 static int
-appldata_timer_handler(ctl_table *ctl, int write,
+appldata_timer_handler(struct ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-	int len;
+	unsigned int len;
 	char buf[2];
 
 	if (!*lenp || *ppos) {
@@ -243,10 +243,11 @@
  * current timer interval.
  */
 static int
-appldata_interval_handler(ctl_table *ctl, int write,
+appldata_interval_handler(struct ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-	int len, interval;
+	unsigned int len;
+	int interval;
 	char buf[16];
 
 	if (!*lenp || *ppos) {
@@ -286,11 +287,12 @@
  * monitoring (0 = not in process, 1 = in process)
  */
 static int
-appldata_generic_handler(ctl_table *ctl, int write,
+appldata_generic_handler(struct ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct appldata_ops *ops = NULL, *tmp_ops;
-	int rc, len, found;
+	unsigned int len;
+	int rc, found;
 	char buf[2];
 	struct list_head *lh;
 
diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig
new file mode 100644
index 0000000..e0af2ee
--- /dev/null
+++ b/arch/s390/configs/default_defconfig
@@ -0,0 +1,655 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+CONFIG_PREEMPT=y
+CONFIG_HZ_100=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
+CONFIG_CHSC_SCH=y
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_HIBERNATION=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NET_SCTPPROBE=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+CONFIG_RDS_DEBUG=y
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_DEVTMPFS=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_XIP=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_ZFCP=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
+CONFIG_VHOST_NET=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+CONFIG_MLX4_EN=m
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TN3270_FS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ZVM_WATCHDOG=m
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2_DEBUG=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_XFS_DEBUG=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_READABLE_ASM=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_SLUB_DEBUG_ON=y
+CONFIG_SLUB_STATS=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_VM_RB=y
+CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
+CONFIG_DEBUG_PER_CPU_MAPS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_RT_MUTEX_TESTER=y
+CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCK_STAT=y
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_DEBUG_CREDENTIALS=y
+CONFIG_PROVE_RCU=y
+CONFIG_RCU_TORTURE_TEST=m
+CONFIG_RCU_CPU_STALL_TIMEOUT=300
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAIL_IO_TIMEOUT=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_LATENCYTOP=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_KPROBE_EVENT is not set
+CONFIG_LKDTM=m
+CONFIG_KPROBES_SANITY_TEST=y
+CONFIG_RBTREE_TEST=m
+CONFIG_INTERVAL_TREE_TEST=m
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_DMA_API_DEBUG=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_S390_PTDUMP=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_IMA=y
+CONFIG_IMA_APPRAISE=y
+CONFIG_CRYPTO_USER=m
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
+CONFIG_PUBLIC_KEY_ALGO_RSA=m
+CONFIG_X509_CERTIFICATE_PARSER=m
+CONFIG_CRC7=m
+CONFIG_CRC8=m
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_CORDIC=m
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_KVM_S390_UCONTROL=y
diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig
new file mode 100644
index 0000000..b9f6b4c
--- /dev/null
+++ b/arch/s390/configs/gcov_defconfig
@@ -0,0 +1,618 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_GCOV_KERNEL=y
+CONFIG_GCOV_PROFILE_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+CONFIG_HZ_100=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
+CONFIG_CHSC_SCH=y
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_HIBERNATION=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NET_SCTPPROBE=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_DEVTMPFS=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_XIP=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_ZFCP=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
+CONFIG_VHOST_NET=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+CONFIG_MLX4_EN=m
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TN3270_FS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ZVM_WATCHDOG=m
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2_DEBUG=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
+CONFIG_TIMER_STATS=y
+CONFIG_RCU_TORTURE_TEST=m
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_KPROBE_EVENT is not set
+CONFIG_LKDTM=m
+CONFIG_RBTREE_TEST=m
+CONFIG_INTERVAL_TREE_TEST=m
+CONFIG_ATOMIC64_SELFTEST=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_S390_PTDUMP=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_IMA=y
+CONFIG_IMA_APPRAISE=y
+CONFIG_CRYPTO_USER=m
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
+CONFIG_PUBLIC_KEY_ALGO_RSA=m
+CONFIG_X509_CERTIFICATE_PARSER=m
+CONFIG_CRC7=m
+CONFIG_CRC8=m
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_CORDIC=m
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_KVM_S390_UCONTROL=y
diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig
new file mode 100644
index 0000000..91087b4
--- /dev/null
+++ b/arch/s390/configs/performance_defconfig
@@ -0,0 +1,610 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+CONFIG_HZ_100=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
+CONFIG_CHSC_SCH=y
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_HIBERNATION=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NET_SCTPPROBE=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_DEVTMPFS=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_XIP=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_ZFCP=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
+CONFIG_VHOST_NET=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+CONFIG_MLX4_EN=m
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TN3270_FS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ZVM_WATCHDOG=m
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2_DEBUG=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_TIMER_STATS=y
+CONFIG_RCU_TORTURE_TEST=m
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_KPROBE_EVENT is not set
+CONFIG_LKDTM=m
+CONFIG_ATOMIC64_SELFTEST=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_S390_PTDUMP=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_IMA=y
+CONFIG_IMA_APPRAISE=y
+CONFIG_CRYPTO_USER=m
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
+CONFIG_PUBLIC_KEY_ALGO_RSA=m
+CONFIG_X509_CERTIFICATE_PARSER=m
+CONFIG_CRC7=m
+CONFIG_CRC8=m
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_CORDIC=m
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_KVM_S390_UCONTROL=y
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
new file mode 100644
index 0000000..d725c4d
--- /dev/null
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -0,0 +1,86 @@
+# CONFIG_SWAP is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+# CONFIG_COMPAT is not set
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_HZ_100=y
+# CONFIG_COMPACTION is not set
+# CONFIG_MIGRATION is not set
+# CONFIG_CHECK_STACK is not set
+# CONFIG_CHSC_SCH is not set
+# CONFIG_SCM_BUS is not set
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_IUCV is not set
+CONFIG_ATM=y
+CONFIG_ATM_LANE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV_XPRAM is not set
+# CONFIG_DCSSBLK is not set
+# CONFIG_DASD is not set
+CONFIG_ENCLOSURE_SERVICES=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_ENCLOSURE=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ZFCP=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_HVC_IUCV is not set
+CONFIG_RAW_DRIVER=y
+# CONFIG_SCLP_ASYNC is not set
+# CONFIG_HMC_DRV is not set
+# CONFIG_S390_TAPE is not set
+# CONFIG_VMCP is not set
+# CONFIG_MONWRITER is not set
+# CONFIG_S390_VMUR is not set
+# CONFIG_HID is not set
+CONFIG_MEMSTICK=y
+CONFIG_MEMSTICK_DEBUG=y
+CONFIG_MEMSTICK_UNSAFE_RESUME=y
+CONFIG_MSPRO_BLOCK=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_INOTIFY_USER is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+# CONFIG_PFAULT is not set
+# CONFIG_S390_HYPFS_FS is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_S390_GUEST is not set
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index b4dbade..46cae13 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -725,6 +725,8 @@
 	}
 };
 
+static int xts_aes_alg_reg;
+
 static int ctr_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 			   unsigned int key_len)
 {
@@ -846,6 +848,8 @@
 	}
 };
 
+static int ctr_aes_alg_reg;
+
 static int __init aes_s390_init(void)
 {
 	int ret;
@@ -884,6 +888,7 @@
 		ret = crypto_register_alg(&xts_aes_alg);
 		if (ret)
 			goto xts_aes_err;
+		xts_aes_alg_reg = 1;
 	}
 
 	if (crypt_s390_func_available(KMCTR_AES_128_ENCRYPT,
@@ -902,6 +907,7 @@
 			free_page((unsigned long) ctrblk);
 			goto ctr_aes_err;
 		}
+		ctr_aes_alg_reg = 1;
 	}
 
 out:
@@ -921,9 +927,12 @@
 
 static void __exit aes_s390_fini(void)
 {
-	crypto_unregister_alg(&ctr_aes_alg);
-	free_page((unsigned long) ctrblk);
-	crypto_unregister_alg(&xts_aes_alg);
+	if (ctr_aes_alg_reg) {
+		crypto_unregister_alg(&ctr_aes_alg);
+		free_page((unsigned long) ctrblk);
+	}
+	if (xts_aes_alg_reg)
+		crypto_unregister_alg(&xts_aes_alg);
 	crypto_unregister_alg(&cbc_aes_alg);
 	crypto_unregister_alg(&ecb_aes_alg);
 	crypto_unregister_alg(&aes_alg);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index d204c65..33f5751 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -38,13 +38,14 @@
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z196=y
 CONFIG_HZ_100=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CMA=y
 CONFIG_CRASH_DUMP=y
 CONFIG_BINFMT_MISC=m
 CONFIG_HIBERNATION=y
@@ -152,6 +153,7 @@
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_CRCT10DIF=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index c797832..fa9aaf7 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -19,21 +19,50 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define __CS_LOOP(ptr, op_val, op_string) ({				\
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+
+#define __ATOMIC_OR	"lao"
+#define __ATOMIC_AND	"lan"
+#define __ATOMIC_ADD	"laa"
+
+#define __ATOMIC_LOOP(ptr, op_val, op_string)				\
+({									\
+	int old_val;							\
+									\
+	typecheck(atomic_t *, ptr);					\
+	asm volatile(							\
+		op_string "	%0,%2,%1\n"				\
+		: "=d" (old_val), "+Q" ((ptr)->counter)			\
+		: "d" (op_val)						\
+		: "cc", "memory");					\
+	old_val;							\
+})
+
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
+#define __ATOMIC_OR	"or"
+#define __ATOMIC_AND	"nr"
+#define __ATOMIC_ADD	"ar"
+
+#define __ATOMIC_LOOP(ptr, op_val, op_string)				\
+({									\
 	int old_val, new_val;						\
+									\
+	typecheck(atomic_t *, ptr);					\
 	asm volatile(							\
 		"	l	%0,%2\n"				\
 		"0:	lr	%1,%0\n"				\
 		op_string "	%1,%3\n"				\
 		"	cs	%0,%1,%2\n"				\
 		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=Q" (((atomic_t *)(ptr))->counter)			\
-		: "d" (op_val),	 "Q" (((atomic_t *)(ptr))->counter)	\
+		: "=&d" (old_val), "=&d" (new_val), "+Q" ((ptr)->counter)\
+		: "d" (op_val)						\
 		: "cc", "memory");					\
-	new_val;							\
+	old_val;							\
 })
 
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
 static inline int atomic_read(const atomic_t *v)
 {
 	int c;
@@ -53,32 +82,45 @@
 
 static inline int atomic_add_return(int i, atomic_t *v)
 {
-	return __CS_LOOP(v, i, "ar");
+	return __ATOMIC_LOOP(v, i, __ATOMIC_ADD) + i;
 }
-#define atomic_add(_i, _v)		atomic_add_return(_i, _v)
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+	if (__builtin_constant_p(i) && (i > -129) && (i < 128)) {
+		asm volatile(
+			"asi	%0,%1\n"
+			: "+Q" (v->counter)
+			: "i" (i)
+			: "cc", "memory");
+	} else {
+		atomic_add_return(i, v);
+	}
+#else
+	atomic_add_return(i, v);
+#endif
+}
+
 #define atomic_add_negative(_i, _v)	(atomic_add_return(_i, _v) < 0)
-#define atomic_inc(_v)			atomic_add_return(1, _v)
+#define atomic_inc(_v)			atomic_add(1, _v)
 #define atomic_inc_return(_v)		atomic_add_return(1, _v)
 #define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return __CS_LOOP(v, i, "sr");
-}
-#define atomic_sub(_i, _v)		atomic_sub_return(_i, _v)
+#define atomic_sub(_i, _v)		atomic_add(-(int)(_i), _v)
+#define atomic_sub_return(_i, _v)	atomic_add_return(-(int)(_i), _v)
 #define atomic_sub_and_test(_i, _v)	(atomic_sub_return(_i, _v) == 0)
-#define atomic_dec(_v)			atomic_sub_return(1, _v)
+#define atomic_dec(_v)			atomic_sub(1, _v)
 #define atomic_dec_return(_v)		atomic_sub_return(1, _v)
 #define atomic_dec_and_test(_v)		(atomic_sub_return(1, _v) == 0)
 
-static inline void atomic_clear_mask(unsigned long mask, atomic_t *v)
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 {
-	__CS_LOOP(v, ~mask, "nr");
+	__ATOMIC_LOOP(v, ~mask, __ATOMIC_AND);
 }
 
-static inline void atomic_set_mask(unsigned long mask, atomic_t *v)
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 {
-	__CS_LOOP(v, mask, "or");
+	__ATOMIC_LOOP(v, mask, __ATOMIC_OR);
 }
 
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
@@ -87,8 +129,8 @@
 {
 	asm volatile(
 		"	cs	%0,%2,%1"
-		: "+d" (old), "=Q" (v->counter)
-		: "d" (new), "Q" (v->counter)
+		: "+d" (old), "+Q" (v->counter)
+		: "d" (new)
 		: "cc", "memory");
 	return old;
 }
@@ -109,27 +151,56 @@
 }
 
 
-#undef __CS_LOOP
+#undef __ATOMIC_LOOP
 
 #define ATOMIC64_INIT(i)  { (i) }
 
 #ifdef CONFIG_64BIT
 
-#define __CSG_LOOP(ptr, op_val, op_string) ({				\
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+
+#define __ATOMIC64_OR	"laog"
+#define __ATOMIC64_AND	"lang"
+#define __ATOMIC64_ADD	"laag"
+
+#define __ATOMIC64_LOOP(ptr, op_val, op_string)				\
+({									\
+	long long old_val;						\
+									\
+	typecheck(atomic64_t *, ptr);					\
+	asm volatile(							\
+		op_string "	%0,%2,%1\n"				\
+		: "=d" (old_val), "+Q" ((ptr)->counter)			\
+		: "d" (op_val)						\
+		: "cc", "memory");					\
+	old_val;							\
+})
+
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
+#define __ATOMIC64_OR	"ogr"
+#define __ATOMIC64_AND	"ngr"
+#define __ATOMIC64_ADD	"agr"
+
+#define __ATOMIC64_LOOP(ptr, op_val, op_string)				\
+({									\
 	long long old_val, new_val;					\
+									\
+	typecheck(atomic64_t *, ptr);					\
 	asm volatile(							\
 		"	lg	%0,%2\n"				\
 		"0:	lgr	%1,%0\n"				\
 		op_string "	%1,%3\n"				\
 		"	csg	%0,%1,%2\n"				\
 		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=Q" (((atomic_t *)(ptr))->counter)			\
-		: "d" (op_val),	"Q" (((atomic_t *)(ptr))->counter)	\
+		: "=&d" (old_val), "=&d" (new_val), "+Q" ((ptr)->counter)\
+		: "d" (op_val)						\
 		: "cc", "memory");					\
-	new_val;							\
+	old_val;							\
 })
 
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
 static inline long long atomic64_read(const atomic64_t *v)
 {
 	long long c;
@@ -149,22 +220,17 @@
 
 static inline long long atomic64_add_return(long long i, atomic64_t *v)
 {
-	return __CSG_LOOP(v, i, "agr");
-}
-
-static inline long long atomic64_sub_return(long long i, atomic64_t *v)
-{
-	return __CSG_LOOP(v, i, "sgr");
+	return __ATOMIC64_LOOP(v, i, __ATOMIC64_ADD) + i;
 }
 
 static inline void atomic64_clear_mask(unsigned long mask, atomic64_t *v)
 {
-	__CSG_LOOP(v, ~mask, "ngr");
+	__ATOMIC64_LOOP(v, ~mask, __ATOMIC64_AND);
 }
 
 static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v)
 {
-	__CSG_LOOP(v, mask, "ogr");
+	__ATOMIC64_LOOP(v, mask, __ATOMIC64_OR);
 }
 
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
@@ -174,13 +240,13 @@
 {
 	asm volatile(
 		"	csg	%0,%2,%1"
-		: "+d" (old), "=Q" (v->counter)
-		: "d" (new), "Q" (v->counter)
+		: "+d" (old), "+Q" (v->counter)
+		: "d" (new)
 		: "cc", "memory");
 	return old;
 }
 
-#undef __CSG_LOOP
+#undef __ATOMIC64_LOOP
 
 #else /* CONFIG_64BIT */
 
@@ -216,8 +282,8 @@
 		"	lm	%0,%N0,%1\n"
 		"0:	cds	%0,%2,%1\n"
 		"	jl	0b\n"
-		: "=&d" (rp_old), "=Q" (v->counter)
-		: "d" (rp_new), "Q" (v->counter)
+		: "=&d" (rp_old), "+Q" (v->counter)
+		: "d" (rp_new)
 		: "cc");
 	return rp_old.pair;
 }
@@ -230,8 +296,8 @@
 
 	asm volatile(
 		"	cds	%0,%2,%1"
-		: "+&d" (rp_old), "=Q" (v->counter)
-		: "d" (rp_new), "Q" (v->counter)
+		: "+&d" (rp_old), "+Q" (v->counter)
+		: "d" (rp_new)
 		: "cc");
 	return rp_old.pair;
 }
@@ -248,17 +314,6 @@
 	return new;
 }
 
-static inline long long atomic64_sub_return(long long i, atomic64_t *v)
-{
-	long long old, new;
-
-	do {
-		old = atomic64_read(v);
-		new = old - i;
-	} while (atomic64_cmpxchg(v, old, new) != old);
-	return new;
-}
-
 static inline void atomic64_set_mask(unsigned long long mask, atomic64_t *v)
 {
 	long long old, new;
@@ -281,7 +336,24 @@
 
 #endif /* CONFIG_64BIT */
 
-static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+	if (__builtin_constant_p(i) && (i > -129) && (i < 128)) {
+		asm volatile(
+			"agsi	%0,%1\n"
+			: "+Q" (v->counter)
+			: "i" (i)
+			: "cc", "memory");
+	} else {
+		atomic64_add_return(i, v);
+	}
+#else
+	atomic64_add_return(i, v);
+#endif
+}
+
+static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u)
 {
 	long long c, old;
 
@@ -289,7 +361,7 @@
 	for (;;) {
 		if (unlikely(c == u))
 			break;
-		old = atomic64_cmpxchg(v, c, c + a);
+		old = atomic64_cmpxchg(v, c, c + i);
 		if (likely(old == c))
 			break;
 		c = old;
@@ -314,14 +386,14 @@
 	return dec;
 }
 
-#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
 #define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
-#define atomic64_inc(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc(_v)		atomic64_add(1, _v)
 #define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
 #define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
-#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
+#define atomic64_sub_return(_i, _v)	atomic64_add_return(-(long long)(_i), _v)
+#define atomic64_sub(_i, _v)		atomic64_add(-(long long)(_i), _v)
 #define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
-#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec(_v)		atomic64_sub(1, _v)
 #define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
 #define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
 #define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1, 0)
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index 10135a3..6e6ad06 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -1,10 +1,40 @@
 /*
- *  S390 version
- *    Copyright IBM Corp. 1999
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *    Copyright IBM Corp. 1999,2013
  *
- *  Derived from "include/asm-i386/bitops.h"
- *    Copyright (C) 1992, Linus Torvalds
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *
+ * The description below was taken in large parts from the powerpc
+ * bitops header file:
+ * Within a word, bits are numbered LSB first.  Lot's of places make
+ * this assumption by directly testing bits with (val & (1<<nr)).
+ * This can cause confusion for large (> 1 word) bitmaps on a
+ * big-endian system because, unlike little endian, the number of each
+ * bit depends on the word size.
+ *
+ * The bitop functions are defined to work on unsigned longs, so for an
+ * s390x system the bits end up numbered:
+ *   |63..............0|127............64|191...........128|255...........196|
+ * and on s390:
+ *   |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224|
+ *
+ * There are a few little-endian macros used mostly for filesystem
+ * bitmaps, these work on similar bit arrays layouts, but
+ * byte-oriented:
+ *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
+ *
+ * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
+ * number field needs to be reversed compared to the big-endian bit
+ * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
+ *
+ * We also have special functions which work with an MSB0 encoding:
+ * on an s390x system the bits are numbered:
+ *   |0..............63|64............127|128...........191|192...........255|
+ * and on s390:
+ *   |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255|
+ *
+ * The main difference is that bit 0-63 (64b) or 0-31 (32b) in the bit
+ * number field needs to be reversed compared to the LSB0 encoded bit
+ * fields. This can be achieved by XOR with 0x3f (64b) or 0x1f (32b).
  *
  */
 
@@ -15,556 +45,348 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
+#include <linux/typecheck.h>
 #include <linux/compiler.h>
 
-/*
- * 32 bit bitops format:
- * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
- * bit 32 is the LSB of *(addr+4). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- *
- * 64 bit bitops format:
- * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
- * bit 64 is the LSB of *(addr+8). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
- *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
- *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
- *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- */
-
-/* bitmap tables from arch/s390/kernel/bitmap.c */
-extern const char _oi_bitmap[];
-extern const char _ni_bitmap[];
-extern const char _zb_findmap[];
-extern const char _sb_findmap[];
-
 #ifndef CONFIG_64BIT
 
 #define __BITOPS_OR		"or"
 #define __BITOPS_AND		"nr"
 #define __BITOPS_XOR		"xr"
 
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+#define __BITOPS_LOOP(__addr, __val, __op_string)		\
+({								\
+	unsigned long __old, __new;				\
+								\
+	typecheck(unsigned long *, (__addr));			\
 	asm volatile(						\
 		"	l	%0,%2\n"			\
 		"0:	lr	%1,%0\n"			\
 		__op_string "	%1,%3\n"			\
 		"	cs	%0,%1,%2\n"			\
 		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
+		: "=&d" (__old), "=&d" (__new), "+Q" (*(__addr))\
+		: "d" (__val)					\
+		: "cc");					\
+	__old;							\
+})
 
 #else /* CONFIG_64BIT */
 
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+
+#define __BITOPS_OR		"laog"
+#define __BITOPS_AND		"lang"
+#define __BITOPS_XOR		"laxg"
+
+#define __BITOPS_LOOP(__addr, __val, __op_string)		\
+({								\
+	unsigned long __old;					\
+								\
+	typecheck(unsigned long *, (__addr));			\
+	asm volatile(						\
+		__op_string "	%0,%2,%1\n"			\
+		: "=d" (__old),	"+Q" (*(__addr))		\
+		: "d" (__val)					\
+		: "cc");					\
+	__old;							\
+})
+
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
 #define __BITOPS_OR		"ogr"
 #define __BITOPS_AND		"ngr"
 #define __BITOPS_XOR		"xgr"
 
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+#define __BITOPS_LOOP(__addr, __val, __op_string)		\
+({								\
+	unsigned long __old, __new;				\
+								\
+	typecheck(unsigned long *, (__addr));			\
 	asm volatile(						\
 		"	lg	%0,%2\n"			\
 		"0:	lgr	%1,%0\n"			\
 		__op_string "	%1,%3\n"			\
 		"	csg	%0,%1,%2\n"			\
 		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
+		: "=&d" (__old), "=&d" (__new), "+Q" (*(__addr))\
+		: "d" (__val)					\
+		: "cc");					\
+	__old;							\
+})
+
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
 
 #endif /* CONFIG_64BIT */
 
 #define __BITOPS_WORDS(bits) (((bits) + BITS_PER_LONG - 1) / BITS_PER_LONG)
 
-#ifdef CONFIG_SMP
-/*
- * SMP safe set_bit routine based on compare and swap (CS)
- */
-static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+static inline unsigned long *
+__bitops_word(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long addr;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make OR mask */
-	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	addr = (unsigned long)ptr + ((nr ^ (nr & (BITS_PER_LONG - 1))) >> 3);
+	return (unsigned long *)addr;
 }
 
-/*
- * SMP safe clear_bit routine based on compare and swap (CS)
- */
-static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+static inline unsigned char *
+__bitops_byte(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	return ((unsigned char *)ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
+}
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make AND mask */
+static inline void set_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long mask;
+
+#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES
+	if (__builtin_constant_p(nr)) {
+		unsigned char *caddr = __bitops_byte(nr, ptr);
+
+		asm volatile(
+			"oi	%0,%b1\n"
+			: "+Q" (*caddr)
+			: "i" (1 << (nr & 7))
+			: "cc");
+		return;
+	}
+#endif
+	mask = 1UL << (nr & (BITS_PER_LONG - 1));
+	__BITOPS_LOOP(addr, mask, __BITOPS_OR);
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long mask;
+
+#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES
+	if (__builtin_constant_p(nr)) {
+		unsigned char *caddr = __bitops_byte(nr, ptr);
+
+		asm volatile(
+			"ni	%0,%b1\n"
+			: "+Q" (*caddr)
+			: "i" (~(1 << (nr & 7)))
+			: "cc");
+		return;
+	}
+#endif
 	mask = ~(1UL << (nr & (BITS_PER_LONG - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	__BITOPS_LOOP(addr, mask, __BITOPS_AND);
 }
 
-/*
- * SMP safe change_bit routine based on compare and swap (CS)
- */
-static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+static inline void change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make XOR mask */
+#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES
+	if (__builtin_constant_p(nr)) {
+		unsigned char *caddr = __bitops_byte(nr, ptr);
+
+		asm volatile(
+			"xi	%0,%b1\n"
+			: "+Q" (*caddr)
+			: "i" (1 << (nr & 7))
+			: "cc");
+		return;
+	}
+#endif
 	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	__BITOPS_LOOP(addr, mask, __BITOPS_XOR);
 }
 
-/*
- * SMP safe test_and_set_bit routine based on compare and swap (CS)
- */
 static inline int
-test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+test_and_set_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long old, mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make OR/test mask */
 	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	old = __BITOPS_LOOP(addr, mask, __BITOPS_OR);
 	barrier();
 	return (old & mask) != 0;
 }
 
-/*
- * SMP safe test_and_clear_bit routine based on compare and swap (CS)
- */
 static inline int
-test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long old, mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make AND/test mask */
 	mask = ~(1UL << (nr & (BITS_PER_LONG - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	old = __BITOPS_LOOP(addr, mask, __BITOPS_AND);
 	barrier();
-	return (old ^ new) != 0;
+	return (old & ~mask) != 0;
 }
 
-/*
- * SMP safe test_and_change_bit routine based on compare and swap (CS) 
- */
 static inline int
-test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+test_and_change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long old, mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make XOR/test mask */
 	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	old = __BITOPS_LOOP(addr, mask, __BITOPS_XOR);
 	barrier();
 	return (old & mask) != 0;
 }
-#endif /* CONFIG_SMP */
 
-/*
- * fast, non-SMP set_bit routine
- */
 static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	asm volatile(
-		"	oc	%O0(1,%R0),%1"
-		: "+Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc");
+	*addr |= 1 << (nr & 7);
 }
 
 static inline void 
-__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	*(unsigned char *) addr |= 1 << (nr & 7);
-}
-
-#define set_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_set_bit((nr),(addr)) : \
- __set_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP clear_bit routine
- */
-static inline void 
 __clear_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	asm volatile(
-		"	nc	%O0(1,%R0),%1"
-		: "+Q" (*(char *) addr) : "Q" (_ni_bitmap[nr & 7]) : "cc");
+	*addr &= ~(1 << (nr & 7));
 }
 
-static inline void 
-__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	*(unsigned char *) addr &= ~(1 << (nr & 7));
-}
-
-#define clear_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_clear_bit((nr),(addr)) : \
- __clear_bit((nr),(addr)) )
-
-/* 
- * fast, non-SMP change_bit routine 
- */
 static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	asm volatile(
-		"	xc	%O0(1,%R0),%1"
-		: "+Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc");
+	*addr ^= 1 << (nr & 7);
 }
 
-static inline void 
-__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	*(unsigned char *) addr ^= 1 << (nr & 7);
-}
-
-#define change_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_change_bit((nr),(addr)) : \
- __change_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP test_and_set_bit routine
- */
 static inline int
-test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+__test_and_set_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 	unsigned char ch;
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	oc	%O0(1,%R0),%1"
-		: "+Q" (*(char *) addr)	: "Q" (_oi_bitmap[nr & 7])
-		: "cc", "memory");
+	ch = *addr;
+	*addr |= 1 << (nr & 7);
 	return (ch >> (nr & 7)) & 1;
 }
-#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
 
-/*
- * fast, non-SMP test_and_clear_bit routine
- */
 static inline int
-test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+__test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 	unsigned char ch;
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	nc	%O0(1,%R0),%1"
-		: "+Q" (*(char *) addr)	: "Q" (_ni_bitmap[nr & 7])
-		: "cc", "memory");
+	ch = *addr;
+	*addr &= ~(1 << (nr & 7));
 	return (ch >> (nr & 7)) & 1;
 }
-#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
 
-/*
- * fast, non-SMP test_and_change_bit routine
- */
 static inline int
-test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+__test_and_change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 	unsigned char ch;
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	xc	%O0(1,%R0),%1"
-		: "+Q" (*(char *) addr)	: "Q" (_oi_bitmap[nr & 7])
-		: "cc", "memory");
-	return (ch >> (nr & 7)) & 1;
-}
-#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
-
-#ifdef CONFIG_SMP
-#define set_bit             set_bit_cs
-#define clear_bit           clear_bit_cs
-#define change_bit          change_bit_cs
-#define test_and_set_bit    test_and_set_bit_cs
-#define test_and_clear_bit  test_and_clear_bit_cs
-#define test_and_change_bit test_and_change_bit_cs
-#else
-#define set_bit             set_bit_simple
-#define clear_bit           clear_bit_simple
-#define change_bit          change_bit_simple
-#define test_and_set_bit    test_and_set_bit_simple
-#define test_and_clear_bit  test_and_clear_bit_simple
-#define test_and_change_bit test_and_change_bit_simple
-#endif
-
-
-/*
- * This routine doesn't need to be atomic.
- */
-
-static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(volatile unsigned char *) addr;
+	ch = *addr;
+	*addr ^= 1 << (nr & 7);
 	return (ch >> (nr & 7)) & 1;
 }
 
-static inline int 
-__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
-    return (((volatile char *) addr)
-	    [(nr^(BITS_PER_LONG-8))>>3] & (1<<(nr&7))) != 0;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)) )
-
-/*
- * Optimized find bit helper functions.
- */
-
-/**
- * __ffz_word_loop - find byte offset of first long != -1UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
- */
-static inline unsigned long __ffz_word_loop(const unsigned long *addr,
-					    unsigned long size)
+static inline int test_bit(unsigned long nr, const volatile unsigned long *ptr)
 {
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
+	const volatile unsigned char *addr;
 
-	asm volatile(
-#ifndef CONFIG_64BIT
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&d" (size)
-		: "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
-}
-
-/**
- * __ffs_word_loop - find byte offset of first long != 0UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
- */
-static inline unsigned long __ffs_word_loop(const unsigned long *addr,
-					    unsigned long size)
-{
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
-
-	asm volatile(
-#ifndef CONFIG_64BIT
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&a" (size)
-		: "d" (0UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
-}
-
-/**
- * __ffz_word - add number of the first unset bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for unset bits
- */
-static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
-{
-#ifdef CONFIG_64BIT
-	if ((word & 0xffffffff) == 0xffffffff) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if ((word & 0xffff) == 0xffff) {
-		word >>= 16;
-		nr += 16;
-	}
-	if ((word & 0xff) == 0xff) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _zb_findmap[(unsigned char) word];
-}
-
-/**
- * __ffs_word - add number of the first set bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for set bits
- */
-static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
-{
-#ifdef CONFIG_64BIT
-	if ((word & 0xffffffff) == 0) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if ((word & 0xffff) == 0) {
-		word >>= 16;
-		nr += 16;
-	}
-	if ((word & 0xff) == 0) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _sb_findmap[(unsigned char) word];
-}
-
-
-/**
- * __load_ulong_be - load big endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_be(const unsigned long *p,
-					    unsigned long offset)
-{
-	p = (unsigned long *)((unsigned long) p + offset);
-	return *p;
-}
-
-/**
- * __load_ulong_le - load little endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_le(const unsigned long *p,
-					    unsigned long offset)
-{
-	unsigned long word;
-
-	p = (unsigned long *)((unsigned long) p + offset);
-#ifndef CONFIG_64BIT
-	asm volatile(
-		"	ic	%0,%O1(%R1)\n"
-		"	icm	%0,2,%O1+1(%R1)\n"
-		"	icm	%0,4,%O1+2(%R1)\n"
-		"	icm	%0,8,%O1+3(%R1)"
-		: "=&d" (word) : "Q" (*p) : "cc");
-#else
-	asm volatile(
-		"	lrvg	%0,%1"
-		: "=d" (word) : "m" (*p) );
-#endif
-	return word;
+	addr = ((const volatile unsigned char *)ptr);
+	addr += (nr ^ (BITS_PER_LONG - 8)) >> 3;
+	return (*addr >> (nr & 7)) & 1;
 }
 
 /*
- * The various find bit functions.
+ * Functions which use MSB0 bit numbering.
+ * On an s390x system the bits are numbered:
+ *   |0..............63|64............127|128...........191|192...........255|
+ * and on s390:
+ *   |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255|
  */
+unsigned long find_first_bit_inv(const unsigned long *addr, unsigned long size);
+unsigned long find_next_bit_inv(const unsigned long *addr, unsigned long size,
+				unsigned long offset);
 
-/*
- * ffz - find first zero in word.
- * @word: The word to search
+static inline void set_bit_inv(unsigned long nr, volatile unsigned long *ptr)
+{
+	return set_bit(nr ^ (BITS_PER_LONG - 1), ptr);
+}
+
+static inline void clear_bit_inv(unsigned long nr, volatile unsigned long *ptr)
+{
+	return clear_bit(nr ^ (BITS_PER_LONG - 1), ptr);
+}
+
+static inline void __set_bit_inv(unsigned long nr, volatile unsigned long *ptr)
+{
+	return __set_bit(nr ^ (BITS_PER_LONG - 1), ptr);
+}
+
+static inline void __clear_bit_inv(unsigned long nr, volatile unsigned long *ptr)
+{
+	return __clear_bit(nr ^ (BITS_PER_LONG - 1), ptr);
+}
+
+static inline int test_bit_inv(unsigned long nr,
+			       const volatile unsigned long *ptr)
+{
+	return test_bit(nr ^ (BITS_PER_LONG - 1), ptr);
+}
+
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+
+/**
+ * __flogr - find leftmost one
+ * @word - The word to search
  *
- * Undefined if no zero exists, so code should check against ~0UL first.
+ * Returns the bit number of the most significant bit set,
+ * where the most significant bit has bit number 0.
+ * If no bit is set this function returns 64.
  */
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned char __flogr(unsigned long word)
 {
-	return __ffz_word(0, word);
+	if (__builtin_constant_p(word)) {
+		unsigned long bit = 0;
+
+		if (!word)
+			return 64;
+		if (!(word & 0xffffffff00000000UL)) {
+			word <<= 32;
+			bit += 32;
+		}
+		if (!(word & 0xffff000000000000UL)) {
+			word <<= 16;
+			bit += 16;
+		}
+		if (!(word & 0xff00000000000000UL)) {
+			word <<= 8;
+			bit += 8;
+		}
+		if (!(word & 0xf000000000000000UL)) {
+			word <<= 4;
+			bit += 4;
+		}
+		if (!(word & 0xc000000000000000UL)) {
+			word <<= 2;
+			bit += 2;
+		}
+		if (!(word & 0x8000000000000000UL)) {
+			word <<= 1;
+			bit += 1;
+		}
+		return bit;
+	} else {
+		register unsigned long bit asm("4") = word;
+		register unsigned long out asm("5");
+
+		asm volatile(
+			"       flogr   %[bit],%[bit]\n"
+			: [bit] "+d" (bit), [out] "=d" (out) : : "cc");
+		return bit;
+	}
 }
 
 /**
@@ -573,337 +395,83 @@
  *
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static inline unsigned long __ffs (unsigned long word)
+static inline unsigned long __ffs(unsigned long word)
 {
-	return __ffs_word(0, word);
+	return __flogr(-word & word) ^ (BITS_PER_LONG - 1);
 }
 
 /**
  * ffs - find first bit set
- * @x: the word to search
+ * @word: the word to search
  *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
+ * This is defined the same way as the libc and
+ * compiler builtin ffs routines (man ffs).
  */
-static inline int ffs(int x)
+static inline int ffs(int word)
 {
-	if (!x)
-		return 0;
-	return __ffs_word(1, x);
+	unsigned long mask = 2 * BITS_PER_LONG - 1;
+	unsigned int val = (unsigned int)word;
+
+	return (1 + (__flogr(-val & val) ^ (BITS_PER_LONG - 1))) & mask;
 }
 
 /**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
  *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
+ * Undefined if no set bit exists, so code should check against 0 first.
  */
-static inline unsigned long find_first_zero_bit(const unsigned long *addr,
-						unsigned long size)
+static inline unsigned long __fls(unsigned long word)
 {
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(addr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
+	return __flogr(word) ^ (BITS_PER_LONG - 1);
 }
-#define find_first_zero_bit find_first_zero_bit
 
 /**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
+ * fls64 - find last set bit in a 64-bit word
+ * @word: the word to search
  *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
  */
-static inline unsigned long find_first_bit(const unsigned long * addr,
-					   unsigned long size)
+static inline int fls64(unsigned long word)
 {
-	unsigned long bytes, bits;
+	unsigned long mask = 2 * BITS_PER_LONG - 1;
 
-        if (!size)
-                return 0;
-	bytes = __ffs_word_loop(addr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
+	return (1 + (__flogr(word) ^ (BITS_PER_LONG - 1))) & mask;
 }
-#define find_first_bit find_first_bit
-
-/*
- * Big endian variant whichs starts bit counting from left using
- * the flogr (find leftmost one) instruction.
- */
-static inline unsigned long __flo_word(unsigned long nr, unsigned long val)
-{
-	register unsigned long bit asm("2") = val;
-	register unsigned long out asm("3");
-
-	asm volatile (
-		"	.insn	rre,0xb9830000,%[bit],%[bit]\n"
-		: [bit] "+d" (bit), [out] "=d" (out) : : "cc");
-	return nr + bit;
-}
-
-/*
- * 64 bit special left bitops format:
- * order in memory:
- *    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- *    10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
- *    20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
- *    30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
- * after that follows the next long with bit numbers
- *    40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
- *    50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
- *    60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
- *    70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
- * The reason for this bit ordering is the fact that
- * the hardware sets bits in a bitmap starting at bit 0
- * and we don't want to scan the bitmap from the 'wrong
- * end'.
- */
-static inline unsigned long find_first_bit_left(const unsigned long *addr,
-						unsigned long size)
-{
-	unsigned long bytes, bits;
-
-	if (!size)
-		return 0;
-	bytes = __ffs_word_loop(addr, size);
-	bits = __flo_word(bytes * 8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-static inline int find_next_bit_left(const unsigned long *addr,
-				     unsigned long size,
-				     unsigned long offset)
-{
-	const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		set = __flo_word(0, *p & (~0UL >> bit));
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_bit_left(p, size);
-}
-
-#define for_each_set_bit_left(bit, addr, size)				\
-	for ((bit) = find_first_bit_left((addr), (size));		\
-	     (bit) < (size);						\
-	     (bit) = find_next_bit_left((addr), (size), (bit) + 1))
-
-/* same as for_each_set_bit() but use bit as value to start with */
-#define for_each_set_bit_left_cont(bit, addr, size)			\
-	for ((bit) = find_next_bit_left((addr), (size), (bit));		\
-	     (bit) < (size);						\
-	     (bit) = find_next_bit_left((addr), (size), (bit) + 1))
 
 /**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
+ * fls - find last (most-significant) bit set
+ * @word: the word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline int find_next_zero_bit (const unsigned long * addr,
-				      unsigned long size,
-				      unsigned long offset)
+static inline int fls(int word)
 {
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		/*
-		 * __ffz_word returns BITS_PER_LONG
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffz_word(bit, *p >> bit);
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_zero_bit(p, size);
-}
-#define find_next_zero_bit find_next_zero_bit
-
-/**
- * find_next_bit - find the first set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline int find_next_bit (const unsigned long * addr,
-				 unsigned long size,
-				 unsigned long offset)
-{
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		/*
-		 * __ffs_word returns BITS_PER_LONG
-		 * if no one bit is present in the word.
-		 */
-		set = __ffs_word(0, *p & (~0UL << bit));
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_bit(p, size);
-}
-#define find_next_bit find_next_bit
-
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(unsigned long *b)
-{
-	return find_first_bit(b, 140);
+	return fls64((unsigned int)word);
 }
 
-#include <asm-generic/bitops/fls.h>
+#else /* CONFIG_HAVE_MARCH_Z9_109_FEATURES */
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffs.h>
 #include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls.h>
 #include <asm-generic/bitops/fls64.h>
 
+#endif /* CONFIG_HAVE_MARCH_Z9_109_FEATURES */
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/hweight.h>
 #include <asm-generic/bitops/lock.h>
-
-/*
- * ATTENTION: intel byte ordering convention for ext2 and minix !!
- * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
- * bit 32 is the LSB of (addr+4).
- * That combined with the little endian byte order of Intel gives the
- * following bit order in memory:
- *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
- *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
- */
-
-static inline int find_first_zero_bit_le(void *vaddr, unsigned int size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(vaddr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-#define find_first_zero_bit_le find_first_zero_bit_le
-
-static inline int find_next_zero_bit_le(void *vaddr, unsigned long size,
-					  unsigned long offset)
-{
-        unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-        if (offset >= size)
-                return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-        if (bit) {
-		/*
-		 * s390 version of ffz returns BITS_PER_LONG
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-        }
-	return offset + find_first_zero_bit_le(p, size);
-}
-#define find_next_zero_bit_le find_next_zero_bit_le
-
-static inline unsigned long find_first_bit_le(void *vaddr, unsigned long size)
-{
-	unsigned long bytes, bits;
-
-	if (!size)
-		return 0;
-	bytes = __ffs_word_loop(vaddr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-#define find_first_bit_le find_first_bit_le
-
-static inline int find_next_bit_le(void *vaddr, unsigned long size,
-				     unsigned long offset)
-{
-	unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		/*
-		 * s390 version of ffz returns BITS_PER_LONG
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_bit_le(p, size);
-}
-#define find_next_bit_le find_next_bit_le
-
+#include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/le.h>
-
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
 #endif /* _S390_BITOPS_H */
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index c1e7c64..4bf9da0 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -22,6 +22,7 @@
 #define PSW32_MASK_ASC		0x0000C000UL
 #define PSW32_MASK_CC		0x00003000UL
 #define PSW32_MASK_PM		0x00000f00UL
+#define PSW32_MASK_RI		0x00000080UL
 
 #define PSW32_MASK_USER		0x0000FF00UL
 
@@ -35,7 +36,9 @@
 #define PSW32_ASC_SECONDARY	0x00008000UL
 #define PSW32_ASC_HOME		0x0000C000UL
 
-extern u32 psw32_user_bits;
+#define PSW32_USER_BITS (PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT | \
+			 PSW32_DEFAULT_KEY | PSW32_MASK_BASE | \
+			 PSW32_MASK_MCHECK | PSW32_MASK_PSTATE | PSW32_ASC_HOME)
 
 #define COMPAT_USER_HZ		100
 #define COMPAT_UTS_MACHINE	"s390\0\0\0\0"
diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h
index debfda3..9b69c0b 100644
--- a/arch/s390/include/asm/ctl_reg.h
+++ b/arch/s390/include/asm/ctl_reg.h
@@ -8,69 +8,59 @@
 #define __ASM_CTL_REG_H
 
 #ifdef CONFIG_64BIT
+# define __CTL_LOAD	"lctlg"
+# define __CTL_STORE	"stctg"
+#else
+# define __CTL_LOAD	"lctl"
+# define __CTL_STORE	"stctl"
+#endif
 
-#define __ctl_load(array, low, high) ({				\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	lctlg	%1,%2,%0\n"			\
-		: : "Q" (*(addrtype *)(&array)),		\
-		    "i" (low), "i" (high));			\
-	})
+#define __ctl_load(array, low, high) {					\
+	typedef struct { char _[sizeof(array)]; } addrtype;		\
+									\
+	BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\
+	asm volatile(							\
+		__CTL_LOAD " %1,%2,%0\n"				\
+		: : "Q" (*(addrtype *)(&array)), "i" (low), "i" (high));\
+}
 
-#define __ctl_store(array, low, high) ({			\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	stctg	%1,%2,%0\n"			\
-		: "=Q" (*(addrtype *)(&array))			\
-		: "i" (low), "i" (high));			\
-	})
+#define __ctl_store(array, low, high) {					\
+	typedef struct { char _[sizeof(array)]; } addrtype;		\
+									\
+	BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\
+	asm volatile(							\
+		__CTL_STORE " %1,%2,%0\n"				\
+		: "=Q" (*(addrtype *)(&array))				\
+		: "i" (low), "i" (high));				\
+}
 
-#else /* CONFIG_64BIT */
+static inline void __ctl_set_bit(unsigned int cr, unsigned int bit)
+{
+	unsigned long reg;
 
-#define __ctl_load(array, low, high) ({				\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	lctl	%1,%2,%0\n"			\
-		: : "Q" (*(addrtype *)(&array)),		\
-		    "i" (low), "i" (high));			\
-})
+	__ctl_store(reg, cr, cr);
+	reg |= 1UL << bit;
+	__ctl_load(reg, cr, cr);
+}
 
-#define __ctl_store(array, low, high) ({			\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	stctl	%1,%2,%0\n"			\
-		: "=Q" (*(addrtype *)(&array))			\
-		: "i" (low), "i" (high));			\
-	})
+static inline void __ctl_clear_bit(unsigned int cr, unsigned int bit)
+{
+	unsigned long reg;
 
-#endif /* CONFIG_64BIT */
+	__ctl_store(reg, cr, cr);
+	reg &= ~(1UL << bit);
+	__ctl_load(reg, cr, cr);
+}
 
-#define __ctl_set_bit(cr, bit) ({	\
-	unsigned long __dummy;		\
-	__ctl_store(__dummy, cr, cr);	\
-	__dummy |= 1UL << (bit);	\
-	__ctl_load(__dummy, cr, cr);	\
-})
-
-#define __ctl_clear_bit(cr, bit) ({	\
-	unsigned long __dummy;		\
-	__ctl_store(__dummy, cr, cr);	\
-	__dummy &= ~(1UL << (bit));	\
-	__ctl_load(__dummy, cr, cr);	\
-})
+void smp_ctl_set_bit(int cr, int bit);
+void smp_ctl_clear_bit(int cr, int bit);
 
 #ifdef CONFIG_SMP
-
-extern void smp_ctl_set_bit(int cr, int bit);
-extern void smp_ctl_clear_bit(int cr, int bit);
-#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
-#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
-
+# define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
+# define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
 #else
-
-#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
-#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
-
-#endif /* CONFIG_SMP */
+# define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
+# define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
+#endif
 
 #endif /* __ASM_CTL_REG_H */
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 188c505..530c15e 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -107,6 +107,11 @@
 void debug_set_critical(void);
 void debug_stop_all(void);
 
+static inline bool debug_level_enabled(debug_info_t* id, int level)
+{
+	return level <= id->level;
+}
+
 static inline debug_entry_t*
 debug_event(debug_info_t* id, int level, void* data, int length)
 {
diff --git a/arch/s390/include/asm/dis.h b/arch/s390/include/asm/dis.h
new file mode 100644
index 0000000..04a83f5
--- /dev/null
+++ b/arch/s390/include/asm/dis.h
@@ -0,0 +1,52 @@
+/*
+ * Disassemble s390 instructions.
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#ifndef __ASM_S390_DIS_H__
+#define __ASM_S390_DIS_H__
+
+/* Type of operand */
+#define OPERAND_GPR	0x1	/* Operand printed as %rx */
+#define OPERAND_FPR	0x2	/* Operand printed as %fx */
+#define OPERAND_AR	0x4	/* Operand printed as %ax */
+#define OPERAND_CR	0x8	/* Operand printed as %cx */
+#define OPERAND_DISP	0x10	/* Operand printed as displacement */
+#define OPERAND_BASE	0x20	/* Operand printed as base register */
+#define OPERAND_INDEX	0x40	/* Operand printed as index register */
+#define OPERAND_PCREL	0x80	/* Operand printed as pc-relative symbol */
+#define OPERAND_SIGNED	0x100	/* Operand printed as signed value */
+#define OPERAND_LENGTH	0x200	/* Operand printed as length (+1) */
+
+
+struct s390_operand {
+	int bits;		/* The number of bits in the operand. */
+	int shift;		/* The number of bits to shift. */
+	int flags;		/* One bit syntax flags. */
+};
+
+struct s390_insn {
+	const char name[5];
+	unsigned char opfrag;
+	unsigned char format;
+};
+
+
+static inline int insn_length(unsigned char code)
+{
+	return ((((int) code + 64) >> 7) + 1) << 1;
+}
+
+void show_code(struct pt_regs *regs);
+void print_fn_code(unsigned char *code, unsigned long len);
+int insn_to_mnemonic(unsigned char *instruction, char *buf, unsigned int len);
+struct s390_insn *find_insn(unsigned char *code);
+
+static inline int is_known_insn(unsigned char *code)
+{
+	return !!find_insn(code);
+}
+
+#endif /* __ASM_S390_DIS_H__ */
diff --git a/arch/s390/include/asm/fcx.h b/arch/s390/include/asm/fcx.h
index ef61709..7ecb92b 100644
--- a/arch/s390/include/asm/fcx.h
+++ b/arch/s390/include/asm/fcx.h
@@ -12,9 +12,9 @@
 
 #define TCW_FORMAT_DEFAULT		0
 #define TCW_TIDAW_FORMAT_DEFAULT	0
-#define TCW_FLAGS_INPUT_TIDA		1 << (23 - 5)
-#define TCW_FLAGS_TCCB_TIDA		1 << (23 - 6)
-#define TCW_FLAGS_OUTPUT_TIDA		1 << (23 - 7)
+#define TCW_FLAGS_INPUT_TIDA		(1 << (23 - 5))
+#define TCW_FLAGS_TCCB_TIDA		(1 << (23 - 6))
+#define TCW_FLAGS_OUTPUT_TIDA		(1 << (23 - 7))
 #define TCW_FLAGS_TIDAW_FORMAT(x)	((x) & 3) << (23 - 9)
 #define TCW_FLAGS_GET_TIDAW_FORMAT(x)	(((x) >> (23 - 9)) & 3)
 
@@ -54,11 +54,11 @@
 	u32 intrg;
 } __attribute__ ((packed, aligned(64)));
 
-#define TIDAW_FLAGS_LAST		1 << (7 - 0)
-#define TIDAW_FLAGS_SKIP		1 << (7 - 1)
-#define TIDAW_FLAGS_DATA_INT		1 << (7 - 2)
-#define TIDAW_FLAGS_TTIC		1 << (7 - 3)
-#define TIDAW_FLAGS_INSERT_CBC		1 << (7 - 4)
+#define TIDAW_FLAGS_LAST		(1 << (7 - 0))
+#define TIDAW_FLAGS_SKIP		(1 << (7 - 1))
+#define TIDAW_FLAGS_DATA_INT		(1 << (7 - 2))
+#define TIDAW_FLAGS_TTIC		(1 << (7 - 3))
+#define TIDAW_FLAGS_INSERT_CBC		(1 << (7 - 4))
 
 /**
  * struct tidaw - Transport-Indirect-Addressing Word (TIDAW)
@@ -106,9 +106,9 @@
 	u8 sense[32];
 } __attribute__ ((packed));
 
-#define TSA_INTRG_FLAGS_CU_STATE_VALID		1 << (7 - 0)
-#define TSA_INTRG_FLAGS_DEV_STATE_VALID		1 << (7 - 1)
-#define TSA_INTRG_FLAGS_OP_STATE_VALID		1 << (7 - 2)
+#define TSA_INTRG_FLAGS_CU_STATE_VALID		(1 << (7 - 0))
+#define TSA_INTRG_FLAGS_DEV_STATE_VALID		(1 << (7 - 1))
+#define TSA_INTRG_FLAGS_OP_STATE_VALID		(1 << (7 - 2))
 
 /**
  * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA)
@@ -140,10 +140,10 @@
 #define TSB_FORMAT_DDPC		2
 #define TSB_FORMAT_INTRG	3
 
-#define TSB_FLAGS_DCW_OFFSET_VALID	1 << (7 - 0)
-#define TSB_FLAGS_COUNT_VALID		1 << (7 - 1)
-#define TSB_FLAGS_CACHE_MISS		1 << (7 - 2)
-#define TSB_FLAGS_TIME_VALID		1 << (7 - 3)
+#define TSB_FLAGS_DCW_OFFSET_VALID	(1 << (7 - 0))
+#define TSB_FLAGS_COUNT_VALID		(1 << (7 - 1))
+#define TSB_FLAGS_CACHE_MISS		(1 << (7 - 2))
+#define TSB_FLAGS_TIME_VALID		(1 << (7 - 3))
 #define TSB_FLAGS_FORMAT(x)		((x) & 7)
 #define TSB_FORMAT(t)			((t)->flags & 7)
 
@@ -179,9 +179,9 @@
 #define DCW_INTRG_RCQ_PRIMARY		1
 #define DCW_INTRG_RCQ_SECONDARY		2
 
-#define DCW_INTRG_FLAGS_MPM		1 < (7 - 0)
-#define DCW_INTRG_FLAGS_PPR		1 < (7 - 1)
-#define DCW_INTRG_FLAGS_CRIT		1 < (7 - 2)
+#define DCW_INTRG_FLAGS_MPM		(1 << (7 - 0))
+#define DCW_INTRG_FLAGS_PPR		(1 << (7 - 1))
+#define DCW_INTRG_FLAGS_CRIT		(1 << (7 - 2))
 
 /**
  * struct dcw_intrg_data - Interrogate DCW data
@@ -216,7 +216,7 @@
 	u8  prog_data[0];
 } __attribute__ ((packed));
 
-#define DCW_FLAGS_CC		1 << (7 - 1)
+#define DCW_FLAGS_CC		(1 << (7 - 1))
 
 #define DCW_CMD_WRITE		0x01
 #define DCW_CMD_READ		0x02
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 2bd6cb89..2fcccc0 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -7,6 +7,7 @@
 #ifndef _ASM_S390_IPL_H
 #define _ASM_S390_IPL_H
 
+#include <asm/lowcore.h>
 #include <asm/types.h>
 #include <asm/cio.h>
 #include <asm/setup.h>
@@ -86,7 +87,14 @@
  */
 extern u32 ipl_flags;
 extern u32 dump_prefix_page;
-extern unsigned int zfcpdump_prefix_array[];
+
+struct dump_save_areas {
+	struct save_area **areas;
+	int count;
+};
+
+extern struct dump_save_areas dump_save_areas;
+struct save_area *dump_save_area_create(int cpu);
 
 extern void do_reipl(void);
 extern void do_halt(void);
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index 9f973d8..5d1f950 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -40,14 +40,8 @@
 	pgd_t *pgd = mm->pgd;
 
 	S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
-	if (s390_user_mode != HOME_SPACE_MODE) {
-		/* Load primary space page table origin. */
-		asm volatile(LCTL_OPCODE" 1,1,%0\n"
-			     : : "m" (S390_lowcore.user_asce) );
-	} else
-		/* Load home space page table origin. */
-		asm volatile(LCTL_OPCODE" 13,13,%0"
-			     : : "m" (S390_lowcore.user_asce) );
+	/* Load primary space page table origin. */
+	asm volatile(LCTL_OPCODE" 1,1,%0\n" : : "m" (S390_lowcore.user_asce));
 	set_fs(current->thread.mm_segment);
 }
 
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 1e51f29..316c850 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -30,7 +30,12 @@
 #include <asm/setup.h>
 #ifndef __ASSEMBLY__
 
-void storage_key_init_range(unsigned long start, unsigned long end);
+static inline void storage_key_init_range(unsigned long start, unsigned long end)
+{
+#if PAGE_DEFAULT_KEY
+	__storage_key_init_range(start, end);
+#endif
+}
 
 static inline void clear_page(void *page)
 {
diff --git a/arch/s390/include/asm/pci_debug.h b/arch/s390/include/asm/pci_debug.h
index 1ca5d10..ac24b26 100644
--- a/arch/s390/include/asm/pci_debug.h
+++ b/arch/s390/include/asm/pci_debug.h
@@ -6,14 +6,9 @@
 extern debug_info_t *pci_debug_msg_id;
 extern debug_info_t *pci_debug_err_id;
 
-#ifdef CONFIG_PCI_DEBUG
 #define zpci_dbg(imp, fmt, args...)				\
 	debug_sprintf_event(pci_debug_msg_id, imp, fmt, ##args)
 
-#else /* !CONFIG_PCI_DEBUG */
-#define zpci_dbg(imp, fmt, args...) do { } while (0)
-#endif
-
 #define zpci_err(text...)							\
 	do {									\
 		char debug_buffer[16];						\
diff --git a/arch/s390/include/asm/pci_insn.h b/arch/s390/include/asm/pci_insn.h
index df6eac9..649eb62 100644
--- a/arch/s390/include/asm/pci_insn.h
+++ b/arch/s390/include/asm/pci_insn.h
@@ -54,11 +54,9 @@
 struct zpci_fib {
 	u32 fmt		:  8;	/* format */
 	u32		: 24;
-	u32 reserved1;
+	u32		: 32;
 	u8 fc;			/* function controls */
-	u8 reserved2;
-	u16 reserved3;
-	u32 reserved4;
+	u64		: 56;
 	u64 pba;		/* PCI base address */
 	u64 pal;		/* PCI address limit */
 	u64 iota;		/* I/O Translation Anchor */
@@ -70,14 +68,13 @@
 	u32 sum		:  1;	/* Adapter int summary bit enabled */
 	u32		:  1;
 	u32 aisbo	:  6;	/* Adapter int summary bit offset */
-	u32 reserved5;
+	u32		: 32;
 	u64 aibv;		/* Adapter int bit vector address */
 	u64 aisb;		/* Adapter int summary bit address */
 	u64 fmb_addr;		/* Function measurement block address and key */
-	u64 reserved6;
-	u64 reserved7;
-} __packed;
-
+	u32		: 32;
+	u32 gd;
+} __packed __aligned(8);
 
 int zpci_mod_fc(u64 req, struct zpci_fib *fib);
 int zpci_refresh_trans(u64 fn, u64 addr, u64 range);
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
index 86fe0ee..fa91e00 100644
--- a/arch/s390/include/asm/percpu.h
+++ b/arch/s390/include/asm/percpu.h
@@ -10,16 +10,22 @@
  */
 #define __my_cpu_offset S390_lowcore.percpu_offset
 
+#ifdef CONFIG_64BIT
+
 /*
  * For 64 bit module code, the module may be more than 4G above the
  * per cpu area, use weak definitions to force the compiler to
  * generate external references.
  */
-#if defined(CONFIG_SMP) && defined(CONFIG_64BIT) && defined(MODULE)
+#if defined(CONFIG_SMP) && defined(MODULE)
 #define ARCH_NEEDS_WEAK_PER_CPU
 #endif
 
-#define arch_this_cpu_to_op(pcp, val, op)				\
+/*
+ * We use a compare-and-swap loop since that uses less cpu cycles than
+ * disabling and enabling interrupts like the generic variant would do.
+ */
+#define arch_this_cpu_to_op_simple(pcp, val, op)			\
 ({									\
 	typedef typeof(pcp) pcp_op_T__;					\
 	pcp_op_T__ old__, new__, prev__;				\
@@ -30,42 +36,101 @@
 	do {								\
 		old__ = prev__;						\
 		new__ = old__ op (val);					\
-		switch (sizeof(*ptr__)) {				\
-		case 8:							\
-			prev__ = cmpxchg64(ptr__, old__, new__);	\
-			break;						\
-		default:						\
-			prev__ = cmpxchg(ptr__, old__, new__);		\
-		}							\
+		prev__ = cmpxchg(ptr__, old__, new__);			\
 	} while (prev__ != old__);					\
 	preempt_enable();						\
 	new__;								\
 })
 
-#define this_cpu_add_1(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_2(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_4(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_8(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+#define this_cpu_add_1(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_2(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_1(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_2(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_and_1(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_and_2(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_or_1(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
+#define this_cpu_or_2(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
 
-#define this_cpu_add_return_1(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_return_2(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_return_4(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_return_8(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+#ifndef CONFIG_HAVE_MARCH_Z196_FEATURES
 
-#define this_cpu_and_1(pcp, val) arch_this_cpu_to_op(pcp, val, &)
-#define this_cpu_and_2(pcp, val) arch_this_cpu_to_op(pcp, val, &)
-#define this_cpu_and_4(pcp, val) arch_this_cpu_to_op(pcp, val, &)
-#define this_cpu_and_8(pcp, val) arch_this_cpu_to_op(pcp, val, &)
+#define this_cpu_add_4(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_8(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_4(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_8(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_and_4(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_and_8(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_or_4(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
+#define this_cpu_or_8(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
 
-#define this_cpu_or_1(pcp, val) arch_this_cpu_to_op(pcp, val, |)
-#define this_cpu_or_2(pcp, val) arch_this_cpu_to_op(pcp, val, |)
-#define this_cpu_or_4(pcp, val) arch_this_cpu_to_op(pcp, val, |)
-#define this_cpu_or_8(pcp, val) arch_this_cpu_to_op(pcp, val, |)
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
 
-#define this_cpu_xor_1(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
-#define this_cpu_xor_2(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
-#define this_cpu_xor_4(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
-#define this_cpu_xor_8(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
+#define arch_this_cpu_add(pcp, val, op1, op2, szcast)			\
+{									\
+	typedef typeof(pcp) pcp_op_T__; 				\
+	pcp_op_T__ val__ = (val);					\
+	pcp_op_T__ old__, *ptr__;					\
+	preempt_disable();						\
+	ptr__ = __this_cpu_ptr(&(pcp)); 				\
+	if (__builtin_constant_p(val__) &&				\
+	    ((szcast)val__ > -129) && ((szcast)val__ < 128)) {		\
+		asm volatile(						\
+			op2 "   %[ptr__],%[val__]\n"			\
+			: [ptr__] "+Q" (*ptr__) 			\
+			: [val__] "i" ((szcast)val__)			\
+			: "cc");					\
+	} else {							\
+		asm volatile(						\
+			op1 "   %[old__],%[val__],%[ptr__]\n"		\
+			: [old__] "=d" (old__), [ptr__] "+Q" (*ptr__)	\
+			: [val__] "d" (val__)				\
+			: "cc");					\
+	}								\
+	preempt_enable();						\
+}
+
+#define this_cpu_add_4(pcp, val) arch_this_cpu_add(pcp, val, "laa", "asi", int)
+#define this_cpu_add_8(pcp, val) arch_this_cpu_add(pcp, val, "laag", "agsi", long)
+
+#define arch_this_cpu_add_return(pcp, val, op)				\
+({									\
+	typedef typeof(pcp) pcp_op_T__; 				\
+	pcp_op_T__ val__ = (val);					\
+	pcp_op_T__ old__, *ptr__;					\
+	preempt_disable();						\
+	ptr__ = __this_cpu_ptr(&(pcp)); 				\
+	asm volatile(							\
+		op "    %[old__],%[val__],%[ptr__]\n"			\
+		: [old__] "=d" (old__), [ptr__] "+Q" (*ptr__)		\
+		: [val__] "d" (val__)					\
+		: "cc");						\
+	preempt_enable();						\
+	old__ + val__;							\
+})
+
+#define this_cpu_add_return_4(pcp, val) arch_this_cpu_add_return(pcp, val, "laa")
+#define this_cpu_add_return_8(pcp, val) arch_this_cpu_add_return(pcp, val, "laag")
+
+#define arch_this_cpu_to_op(pcp, val, op)				\
+{									\
+	typedef typeof(pcp) pcp_op_T__; 				\
+	pcp_op_T__ val__ = (val);					\
+	pcp_op_T__ old__, *ptr__;					\
+	preempt_disable();						\
+	ptr__ = __this_cpu_ptr(&(pcp)); 				\
+	asm volatile(							\
+		op "    %[old__],%[val__],%[ptr__]\n"			\
+		: [old__] "=d" (old__), [ptr__] "+Q" (*ptr__)		\
+		: [val__] "d" (val__)					\
+		: "cc");						\
+	preempt_enable();						\
+}
+
+#define this_cpu_and_4(pcp, val)	arch_this_cpu_to_op(pcp, val, "lan")
+#define this_cpu_and_8(pcp, val)	arch_this_cpu_to_op(pcp, val, "lang")
+#define this_cpu_or_4(pcp, val)		arch_this_cpu_to_op(pcp, val, "lao")
+#define this_cpu_or_8(pcp, val)		arch_this_cpu_to_op(pcp, val, "laog")
+
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
 
 #define arch_this_cpu_cmpxchg(pcp, oval, nval)				\
 ({									\
@@ -74,13 +139,7 @@
 	pcp_op_T__ *ptr__;						\
 	preempt_disable();						\
 	ptr__ = __this_cpu_ptr(&(pcp));					\
-	switch (sizeof(*ptr__)) {					\
-	case 8:								\
-		ret__ = cmpxchg64(ptr__, oval, nval);			\
-		break;							\
-	default:							\
-		ret__ = cmpxchg(ptr__, oval, nval);			\
-	}								\
+	ret__ = cmpxchg(ptr__, oval, nval);				\
 	preempt_enable();						\
 	ret__;								\
 })
@@ -104,9 +163,7 @@
 #define this_cpu_xchg_1(pcp, nval) arch_this_cpu_xchg(pcp, nval)
 #define this_cpu_xchg_2(pcp, nval) arch_this_cpu_xchg(pcp, nval)
 #define this_cpu_xchg_4(pcp, nval) arch_this_cpu_xchg(pcp, nval)
-#ifdef CONFIG_64BIT
 #define this_cpu_xchg_8(pcp, nval) arch_this_cpu_xchg(pcp, nval)
-#endif
 
 #define arch_this_cpu_cmpxchg_double(pcp1, pcp2, o1, o2, n1, n2)	\
 ({									\
@@ -124,9 +181,9 @@
 })
 
 #define this_cpu_cmpxchg_double_4 arch_this_cpu_cmpxchg_double
-#ifdef CONFIG_64BIT
 #define this_cpu_cmpxchg_double_8 arch_this_cpu_cmpxchg_double
-#endif
+
+#endif /* CONFIG_64BIT */
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index ca7821f..0a876bc 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -134,19 +134,17 @@
  * Do necessary setup to start up a new thread.
  */
 #define start_thread(regs, new_psw, new_stackp) do {			\
-	regs->psw.mask	= psw_user_bits | PSW_MASK_EA | PSW_MASK_BA;	\
+	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_EA | PSW_MASK_BA;	\
 	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
 	regs->gprs[15]	= new_stackp;					\
 	execve_tail();							\
 } while (0)
 
 #define start_thread31(regs, new_psw, new_stackp) do {			\
-	regs->psw.mask	= psw_user_bits | PSW_MASK_BA;			\
+	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_BA;			\
 	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
 	regs->gprs[15]	= new_stackp;					\
-	__tlb_flush_mm(current->mm);					\
 	crst_table_downgrade(current->mm, 1UL << 31);			\
-	update_mm(current->mm, current);				\
 	execve_tail();							\
 } while (0)
 
@@ -169,17 +167,15 @@
  */
 extern unsigned long thread_saved_pc(struct task_struct *t);
 
-extern void show_code(struct pt_regs *regs);
-extern void print_fn_code(unsigned char *code, unsigned long len);
-extern int insn_to_mnemonic(unsigned char *instruction, char *buf,
-			    unsigned int len);
-
 unsigned long get_wchan(struct task_struct *p);
 #define task_pt_regs(tsk) ((struct pt_regs *) \
         (task_stack_page(tsk) + THREAD_SIZE) - 1)
 #define KSTK_EIP(tsk)	(task_pt_regs(tsk)->psw.addr)
 #define KSTK_ESP(tsk)	(task_pt_regs(tsk)->gprs[15])
 
+/* Has task runtime instrumentation enabled ? */
+#define is_ri_task(tsk) (!!(tsk)->thread.ri_cb)
+
 static inline unsigned short stap(void)
 {
 	unsigned short cpu_address;
@@ -348,9 +344,9 @@
 }
 
 #define local_mcck_enable() \
-	__set_psw_mask(psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK)
+	__set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK)
 #define local_mcck_disable() \
-	__set_psw_mask(psw_kernel_bits | PSW_MASK_DAT)
+	__set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT)
 
 /*
  * Basic Machine Check/Program Check Handler.
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 52b5653..9c82ceb 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -10,8 +10,11 @@
 
 #ifndef __ASSEMBLY__
 
-extern long psw_kernel_bits;
-extern long psw_user_bits;
+#define PSW_KERNEL_BITS	(PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_HOME | \
+			 PSW_MASK_EA | PSW_MASK_BA)
+#define PSW_USER_BITS	(PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | \
+			 PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK | \
+			 PSW_MASK_PSTATE | PSW_ASC_PRIMARY)
 
 /*
  * The pt_regs struct defines the way the registers are stored on
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 59880dba..df802ee 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -48,13 +48,6 @@
 void create_mem_hole(struct mem_chunk mem_chunk[], unsigned long addr,
 		     unsigned long size);
 
-#define PRIMARY_SPACE_MODE	0
-#define ACCESS_REGISTER_MODE	1
-#define SECONDARY_SPACE_MODE	2
-#define HOME_SPACE_MODE		3
-
-extern unsigned int s390_user_mode;
-
 /*
  * Machine features detected in head.S
  */
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index b64f15c..ac9bed8 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -14,7 +14,6 @@
 #define raw_smp_processor_id()	(S390_lowcore.cpu_nr)
 
 extern struct mutex smp_cpu_state_mutex;
-extern struct save_area *zfcpdump_save_areas[NR_CPUS + 1];
 
 extern int __cpu_up(unsigned int cpu, struct task_struct *tidle);
 
diff --git a/arch/s390/include/asm/switch_to.h b/arch/s390/include/asm/switch_to.h
index 6dbd5597..29c81f8 100644
--- a/arch/s390/include/asm/switch_to.h
+++ b/arch/s390/include/asm/switch_to.h
@@ -13,58 +13,94 @@
 extern struct task_struct *__switch_to(void *, void *);
 extern void update_cr_regs(struct task_struct *task);
 
-static inline void save_fp_regs(s390_fp_regs *fpregs)
+static inline int test_fp_ctl(u32 fpc)
 {
-	asm volatile(
-		"	std	0,%O0+8(%R0)\n"
-		"	std	2,%O0+24(%R0)\n"
-		"	std	4,%O0+40(%R0)\n"
-		"	std	6,%O0+56(%R0)"
-		: "=Q" (*fpregs) : "Q" (*fpregs));
+	u32 orig_fpc;
+	int rc;
+
 	if (!MACHINE_HAS_IEEE)
-		return;
+		return 0;
+
 	asm volatile(
-		"	stfpc	%0\n"
-		"	std	1,%O0+16(%R0)\n"
-		"	std	3,%O0+32(%R0)\n"
-		"	std	5,%O0+48(%R0)\n"
-		"	std	7,%O0+64(%R0)\n"
-		"	std	8,%O0+72(%R0)\n"
-		"	std	9,%O0+80(%R0)\n"
-		"	std	10,%O0+88(%R0)\n"
-		"	std	11,%O0+96(%R0)\n"
-		"	std	12,%O0+104(%R0)\n"
-		"	std	13,%O0+112(%R0)\n"
-		"	std	14,%O0+120(%R0)\n"
-		"	std	15,%O0+128(%R0)\n"
-		: "=Q" (*fpregs) : "Q" (*fpregs));
+		"	efpc    %1\n"
+		"	sfpc	%2\n"
+		"0:	sfpc	%1\n"
+		"	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "=d" (rc), "=d" (orig_fpc)
+		: "d" (fpc), "0" (-EINVAL));
+	return rc;
 }
 
-static inline void restore_fp_regs(s390_fp_regs *fpregs)
+static inline void save_fp_ctl(u32 *fpc)
 {
-	asm volatile(
-		"	ld	0,%O0+8(%R0)\n"
-		"	ld	2,%O0+24(%R0)\n"
-		"	ld	4,%O0+40(%R0)\n"
-		"	ld	6,%O0+56(%R0)"
-		: : "Q" (*fpregs));
 	if (!MACHINE_HAS_IEEE)
 		return;
+
 	asm volatile(
-		"	lfpc	%0\n"
-		"	ld	1,%O0+16(%R0)\n"
-		"	ld	3,%O0+32(%R0)\n"
-		"	ld	5,%O0+48(%R0)\n"
-		"	ld	7,%O0+64(%R0)\n"
-		"	ld	8,%O0+72(%R0)\n"
-		"	ld	9,%O0+80(%R0)\n"
-		"	ld	10,%O0+88(%R0)\n"
-		"	ld	11,%O0+96(%R0)\n"
-		"	ld	12,%O0+104(%R0)\n"
-		"	ld	13,%O0+112(%R0)\n"
-		"	ld	14,%O0+120(%R0)\n"
-		"	ld	15,%O0+128(%R0)\n"
-		: : "Q" (*fpregs));
+		"       stfpc   %0\n"
+		: "+Q" (*fpc));
+}
+
+static inline int restore_fp_ctl(u32 *fpc)
+{
+	int rc;
+
+	if (!MACHINE_HAS_IEEE)
+		return 0;
+
+	asm volatile(
+		"0:	lfpc    %1\n"
+		"	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "=d" (rc) : "Q" (*fpc), "0" (-EINVAL));
+	return rc;
+}
+
+static inline void save_fp_regs(freg_t *fprs)
+{
+	asm volatile("std 0,%0" : "=Q" (fprs[0]));
+	asm volatile("std 2,%0" : "=Q" (fprs[2]));
+	asm volatile("std 4,%0" : "=Q" (fprs[4]));
+	asm volatile("std 6,%0" : "=Q" (fprs[6]));
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile("std 1,%0" : "=Q" (fprs[1]));
+	asm volatile("std 3,%0" : "=Q" (fprs[3]));
+	asm volatile("std 5,%0" : "=Q" (fprs[5]));
+	asm volatile("std 7,%0" : "=Q" (fprs[7]));
+	asm volatile("std 8,%0" : "=Q" (fprs[8]));
+	asm volatile("std 9,%0" : "=Q" (fprs[9]));
+	asm volatile("std 10,%0" : "=Q" (fprs[10]));
+	asm volatile("std 11,%0" : "=Q" (fprs[11]));
+	asm volatile("std 12,%0" : "=Q" (fprs[12]));
+	asm volatile("std 13,%0" : "=Q" (fprs[13]));
+	asm volatile("std 14,%0" : "=Q" (fprs[14]));
+	asm volatile("std 15,%0" : "=Q" (fprs[15]));
+}
+
+static inline void restore_fp_regs(freg_t *fprs)
+{
+	asm volatile("ld 0,%0" : : "Q" (fprs[0]));
+	asm volatile("ld 2,%0" : : "Q" (fprs[2]));
+	asm volatile("ld 4,%0" : : "Q" (fprs[4]));
+	asm volatile("ld 6,%0" : : "Q" (fprs[6]));
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile("ld 1,%0" : : "Q" (fprs[1]));
+	asm volatile("ld 3,%0" : : "Q" (fprs[3]));
+	asm volatile("ld 5,%0" : : "Q" (fprs[5]));
+	asm volatile("ld 7,%0" : : "Q" (fprs[7]));
+	asm volatile("ld 8,%0" : : "Q" (fprs[8]));
+	asm volatile("ld 9,%0" : : "Q" (fprs[9]));
+	asm volatile("ld 10,%0" : : "Q" (fprs[10]));
+	asm volatile("ld 11,%0" : : "Q" (fprs[11]));
+	asm volatile("ld 12,%0" : : "Q" (fprs[12]));
+	asm volatile("ld 13,%0" : : "Q" (fprs[13]));
+	asm volatile("ld 14,%0" : : "Q" (fprs[14]));
+	asm volatile("ld 15,%0" : : "Q" (fprs[15]));
 }
 
 static inline void save_access_regs(unsigned int *acrs)
@@ -83,12 +119,14 @@
 
 #define switch_to(prev,next,last) do {					\
 	if (prev->mm) {							\
-		save_fp_regs(&prev->thread.fp_regs);			\
+		save_fp_ctl(&prev->thread.fp_regs.fpc);			\
+		save_fp_regs(prev->thread.fp_regs.fprs);		\
 		save_access_regs(&prev->thread.acrs[0]);		\
 		save_ri_cb(prev->thread.ri_cb);				\
 	}								\
 	if (next->mm) {							\
-		restore_fp_regs(&next->thread.fp_regs);			\
+		restore_fp_ctl(&next->thread.fp_regs.fpc);		\
+		restore_fp_regs(next->thread.fp_regs.fprs);		\
 		restore_access_regs(&next->thread.acrs[0]);		\
 		restore_ri_cb(next->thread.ri_cb, prev->thread.ri_cb);	\
 		update_cr_regs(next);					\
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 819b94d..8beee1c 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -71,9 +71,11 @@
 
 typedef unsigned long long cycles_t;
 
-static inline void get_tod_clock_ext(char *clk)
+static inline void get_tod_clock_ext(char clk[16])
 {
-	asm volatile("stcke %0" : "=Q" (*clk) : : "cc");
+	typedef struct { char _[sizeof(clk)]; } addrtype;
+
+	asm volatile("stcke %0" : "=Q" (*(addrtype *) clk) : : "cc");
 }
 
 static inline unsigned long long get_tod_clock(void)
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 9c33ed4..79330af 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -94,9 +94,7 @@
 
 struct uaccess_ops {
 	size_t (*copy_from_user)(size_t, const void __user *, void *);
-	size_t (*copy_from_user_small)(size_t, const void __user *, void *);
 	size_t (*copy_to_user)(size_t, void __user *, const void *);
-	size_t (*copy_to_user_small)(size_t, void __user *, const void *);
 	size_t (*copy_in_user)(size_t, void __user *, const void __user *);
 	size_t (*clear_user)(size_t, void __user *);
 	size_t (*strnlen_user)(size_t, const char __user *);
@@ -106,22 +104,20 @@
 };
 
 extern struct uaccess_ops uaccess;
-extern struct uaccess_ops uaccess_std;
 extern struct uaccess_ops uaccess_mvcos;
-extern struct uaccess_ops uaccess_mvcos_switch;
 extern struct uaccess_ops uaccess_pt;
 
 extern int __handle_fault(unsigned long, unsigned long, int);
 
 static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
 {
-	size = uaccess.copy_to_user_small(size, ptr, x);
+	size = uaccess.copy_to_user(size, ptr, x);
 	return size ? -EFAULT : size;
 }
 
 static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
 {
-	size = uaccess.copy_from_user_small(size, ptr, x);
+	size = uaccess.copy_from_user(size, ptr, x);
 	return size ? -EFAULT : size;
 }
 
@@ -226,10 +222,7 @@
 static inline unsigned long __must_check
 __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	if (__builtin_constant_p(n) && (n <= 256))
-		return uaccess.copy_to_user_small(n, to, from);
-	else
-		return uaccess.copy_to_user(n, to, from);
+	return uaccess.copy_to_user(n, to, from);
 }
 
 #define __copy_to_user_inatomic __copy_to_user
@@ -275,10 +268,7 @@
 static inline unsigned long __must_check
 __copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	if (__builtin_constant_p(n) && (n <= 256))
-		return uaccess.copy_from_user_small(n, from, to);
-	else
-		return uaccess.copy_from_user(n, from, to);
+	return uaccess.copy_from_user(n, from, to);
 }
 
 extern void copy_from_user_overflow(void)
diff --git a/arch/s390/include/uapi/asm/ptrace.h b/arch/s390/include/uapi/asm/ptrace.h
index 7a84619..7e0b498 100644
--- a/arch/s390/include/uapi/asm/ptrace.h
+++ b/arch/s390/include/uapi/asm/ptrace.h
@@ -199,6 +199,7 @@
 typedef struct
 {
 	__u32   fpc;
+	__u32	pad;
 	freg_t  fprs[NUM_FPRS];              
 } s390_fp_regs;
 
@@ -206,7 +207,6 @@
 #define FPC_FLAGS_MASK          0x00F80000
 #define FPC_DXC_MASK            0x0000FF00
 #define FPC_RM_MASK             0x00000003
-#define FPC_VALID_MASK          0xF8F8FF03
 
 /* this typedef defines how a Program Status Word looks like */
 typedef struct 
@@ -263,7 +263,7 @@
 #define PSW_MASK_EA		0x0000000100000000UL
 #define PSW_MASK_BA		0x0000000080000000UL
 
-#define PSW_MASK_USER		0x0000FF8180000000UL
+#define PSW_MASK_USER		0x0000FF0180000000UL
 
 #define PSW_ADDR_AMODE		0x0000000000000000UL
 #define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
diff --git a/arch/s390/include/uapi/asm/sigcontext.h b/arch/s390/include/uapi/asm/sigcontext.h
index 584787f..b30de9c 100644
--- a/arch/s390/include/uapi/asm/sigcontext.h
+++ b/arch/s390/include/uapi/asm/sigcontext.h
@@ -49,6 +49,7 @@
 typedef struct
 {
 	unsigned int fpc;
+	unsigned int pad;
 	double   fprs[__NUM_FPRS];
 } _s390_fp_regs;
 
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 4bb2a46..2403303 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -28,7 +28,7 @@
 
 CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
 
-obj-y	:= bitmap.o traps.o time.o process.o base.o early.o setup.o vtime.o
+obj-y	:= traps.o time.o process.o base.o early.o setup.o vtime.o
 obj-y	+= processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o
 obj-y	+= debug.o irq.o ipl.o dis.o diag.o sclp.o vdso.o
 obj-y	+= sysinfo.o jump_label.o lgr.o os_info.o machine_kexec.o pgm_check.o
diff --git a/arch/s390/kernel/bitmap.c b/arch/s390/kernel/bitmap.c
deleted file mode 100644
index 102da5e..0000000
--- a/arch/s390/kernel/bitmap.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *    Bitmaps for set_bit, clear_bit, test_and_set_bit, ...
- *    See include/asm/{bitops.h|posix_types.h} for details
- *
- *    Copyright IBM Corp. 1999, 2009
- *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
- */
-
-#include <linux/bitops.h>
-#include <linux/module.h>
-
-const char _oi_bitmap[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
-EXPORT_SYMBOL(_oi_bitmap);
-
-const char _ni_bitmap[] = { 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f };
-EXPORT_SYMBOL(_ni_bitmap);
-
-const char _zb_findmap[] = {
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,7,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,8 };
-EXPORT_SYMBOL(_zb_findmap);
-
-const char _sb_findmap[] = {
-	8,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	7,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0 };
-EXPORT_SYMBOL(_sb_findmap);
diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c
index dd62071..3a414c0 100644
--- a/arch/s390/kernel/cache.c
+++ b/arch/s390/kernel/cache.c
@@ -146,15 +146,14 @@
 	ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0);
 	for (level = 0; level < CACHE_MAX_LEVEL; level++) {
 		switch (ct.ci[level].scope) {
-		case CACHE_SCOPE_NOTEXISTS:
-		case CACHE_SCOPE_RESERVED:
-			return;
 		case CACHE_SCOPE_SHARED:
 			private = 0;
 			break;
 		case CACHE_SCOPE_PRIVATE:
 			private = 1;
 			break;
+		default:
+			return;
 		}
 		if (ct.ci[level].type == CACHE_TYPE_SEPARATE) {
 			rc  = cache_add(level, private, CACHE_TYPE_DATA);
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 1f1b8c7..e030d2b 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -58,10 +58,6 @@
 
 #include "compat_linux.h"
 
-u32 psw32_user_bits = PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT |
-		      PSW32_DEFAULT_KEY | PSW32_MASK_BASE | PSW32_MASK_MCHECK |
-		      PSW32_MASK_PSTATE | PSW32_ASC_HOME;
- 
 /* For this source file, we want overflow handling. */
 
 #undef high2lowuid
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index 976518c..1bfda3e 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -27,6 +27,7 @@
 typedef struct
 {
 	unsigned int	fpc;
+	unsigned int	pad;
 	freg_t32	fprs[__NUM_FPRS];              
 } _s390_fp_regs32;
 
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index adaa9e9..5a3ab5c 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -153,57 +153,66 @@
 
 static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs)
 {
-	_s390_regs_common32 regs32;
-	int err, i;
+	_sigregs32 user_sregs;
+	int i;
 
-	regs32.psw.mask = psw32_user_bits |
-		((__u32)(regs->psw.mask >> 32) & PSW32_MASK_USER);
-	regs32.psw.addr = (__u32) regs->psw.addr |
+	user_sregs.regs.psw.mask = (__u32)(regs->psw.mask >> 32);
+	user_sregs.regs.psw.mask &= PSW32_MASK_USER | PSW32_MASK_RI;
+	user_sregs.regs.psw.mask |= PSW32_USER_BITS;
+	user_sregs.regs.psw.addr = (__u32) regs->psw.addr |
 		(__u32)(regs->psw.mask & PSW_MASK_BA);
 	for (i = 0; i < NUM_GPRS; i++)
-		regs32.gprs[i] = (__u32) regs->gprs[i];
+		user_sregs.regs.gprs[i] = (__u32) regs->gprs[i];
 	save_access_regs(current->thread.acrs);
-	memcpy(regs32.acrs, current->thread.acrs, sizeof(regs32.acrs));
-	err = __copy_to_user(&sregs->regs, &regs32, sizeof(regs32));
-	if (err)
-		return err;
-	save_fp_regs(&current->thread.fp_regs);
-	/* s390_fp_regs and _s390_fp_regs32 are the same ! */
-	return __copy_to_user(&sregs->fpregs, &current->thread.fp_regs,
-			      sizeof(_s390_fp_regs32));
+	memcpy(&user_sregs.regs.acrs, current->thread.acrs,
+	       sizeof(user_sregs.regs.acrs));
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
+	memcpy(&user_sregs.fpregs, &current->thread.fp_regs,
+	       sizeof(user_sregs.fpregs));
+	if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs32)))
+		return -EFAULT;
+	return 0;
 }
 
 static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 {
-	_s390_regs_common32 regs32;
-	int err, i;
+	_sigregs32 user_sregs;
+	int i;
 
 	/* Alwys make any pending restarted system call return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-	err = __copy_from_user(&regs32, &sregs->regs, sizeof(regs32));
-	if (err)
-		return err;
+	if (__copy_from_user(&user_sregs, &sregs->regs, sizeof(user_sregs)))
+		return -EFAULT;
+
+	if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI))
+		return -EINVAL;
+
+	/* Loading the floating-point-control word can fail. Do that first. */
+	if (restore_fp_ctl(&user_sregs.fpregs.fpc))
+		return -EINVAL;
+
+	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
-		(__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 |
-		(__u64)(regs32.psw.addr & PSW32_ADDR_AMODE);
+		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
+		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
+		(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
 	/* Check for invalid user address space control. */
-	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
-		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+	if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
+		regs->psw.mask = PSW_ASC_PRIMARY |
 			(regs->psw.mask & ~PSW_MASK_ASC);
-	regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN);
+	regs->psw.addr = (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_INSN);
 	for (i = 0; i < NUM_GPRS; i++)
-		regs->gprs[i] = (__u64) regs32.gprs[i];
-	memcpy(current->thread.acrs, regs32.acrs, sizeof(current->thread.acrs));
+		regs->gprs[i] = (__u64) user_sregs.regs.gprs[i];
+	memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
+	       sizeof(current->thread.acrs));
 	restore_access_regs(current->thread.acrs);
 
-	err = __copy_from_user(&current->thread.fp_regs, &sregs->fpregs,
-			       sizeof(_s390_fp_regs32));
-	current->thread.fp_regs.fpc &= FPC_VALID_MASK;
-	if (err)
-		return err;
+	memcpy(&current->thread.fp_regs, &user_sregs.fpregs,
+	       sizeof(current->thread.fp_regs));
 
-	restore_fp_regs(&current->thread.fp_regs);
+	restore_fp_regs(current->thread.fp_regs.fprs);
 	clear_thread_flag(TIF_SYSCALL);	/* No longer in a system call */
 	return 0;
 }
@@ -215,18 +224,18 @@
 
 	for (i = 0; i < NUM_GPRS; i++)
 		gprs_high[i] = regs->gprs[i] >> 32;
-
-	return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high));
+	if (__copy_to_user(uregs, &gprs_high, sizeof(gprs_high)))
+		return -EFAULT;
+	return 0;
 }
 
 static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
 {
 	__u32 gprs_high[NUM_GPRS];
-	int err, i;
+	int i;
 
-	err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high));
-	if (err)
-		return err;
+	if (__copy_from_user(&gprs_high, uregs, sizeof(gprs_high)))
+		return -EFAULT;
 	for (i = 0; i < NUM_GPRS; i++)
 		*(__u32 *)&regs->gprs[i] = gprs_high[i];
 	return 0;
@@ -348,7 +357,7 @@
 	regs->gprs[15] = (__force __u64) frame;
 	/* Force 31 bit amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__force __u64) ka->sa.sa_handler;
 
@@ -415,7 +424,7 @@
 	regs->gprs[15] = (__force __u64) frame;
 	/* Force 31 bit amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__u64 __force) ka->sa.sa_handler;
 
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index 7dd2172..f45b2ab 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -22,6 +22,32 @@
 #define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y)))
 #define PTR_DIFF(x, y) ((unsigned long)(((char *) (x)) - ((unsigned long) (y))))
 
+struct dump_save_areas dump_save_areas;
+
+/*
+ * Allocate and add a save area for a CPU
+ */
+struct save_area *dump_save_area_create(int cpu)
+{
+	struct save_area **save_areas, *save_area;
+
+	save_area = kmalloc(sizeof(*save_area), GFP_KERNEL);
+	if (!save_area)
+		return NULL;
+	if (cpu + 1 > dump_save_areas.count) {
+		dump_save_areas.count = cpu + 1;
+		save_areas = krealloc(dump_save_areas.areas,
+				      dump_save_areas.count * sizeof(void *),
+				      GFP_KERNEL | __GFP_ZERO);
+		if (!save_areas) {
+			kfree(save_area);
+			return NULL;
+		}
+		dump_save_areas.areas = save_areas;
+	}
+	dump_save_areas.areas[cpu] = save_area;
+	return save_area;
+}
 
 /*
  * Return physical address for virtual address
@@ -45,7 +71,6 @@
 static int copy_from_realmem(void *dest, void *src, size_t count)
 {
 	unsigned long size;
-	int rc;
 
 	if (!count)
 		return 0;
@@ -451,8 +476,8 @@
 {
 	int i, cpus = 0;
 
-	for (i = 0; zfcpdump_save_areas[i]; i++) {
-		if (zfcpdump_save_areas[i]->pref_reg == 0)
+	for (i = 0; i < dump_save_areas.count; i++) {
+		if (dump_save_areas.areas[i]->pref_reg == 0)
 			continue;
 		cpus++;
 	}
@@ -523,8 +548,8 @@
 
 	ptr = nt_prpsinfo(ptr);
 
-	for (i = 0; zfcpdump_save_areas[i]; i++) {
-		sa = zfcpdump_save_areas[i];
+	for (i = 0; i < dump_save_areas.count; i++) {
+		sa = dump_save_areas.areas[i];
 		if (sa->pref_reg == 0)
 			continue;
 		ptr = fill_cpu_elf_notes(ptr, sa);
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 17d62fe..ee8390d 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -889,7 +889,7 @@
  * if debug_active is already off
  */
 static int
-s390dbf_procactive(ctl_table *table, int write,
+s390dbf_procactive(struct ctl_table *table, int write,
                      void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!write || debug_stoppable || !debug_active)
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index be87d3e..993efe6 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -23,6 +23,7 @@
 #include <linux/kdebug.h>
 
 #include <asm/uaccess.h>
+#include <asm/dis.h>
 #include <asm/io.h>
 #include <linux/atomic.h>
 #include <asm/mathemu.h>
@@ -37,17 +38,6 @@
 #define ONELONG "%016lx: "
 #endif /* CONFIG_64BIT */
 
-#define OPERAND_GPR	0x1	/* Operand printed as %rx */
-#define OPERAND_FPR	0x2	/* Operand printed as %fx */
-#define OPERAND_AR	0x4	/* Operand printed as %ax */
-#define OPERAND_CR	0x8	/* Operand printed as %cx */
-#define OPERAND_DISP	0x10	/* Operand printed as displacement */
-#define OPERAND_BASE	0x20	/* Operand printed as base register */
-#define OPERAND_INDEX	0x40	/* Operand printed as index register */
-#define OPERAND_PCREL	0x80	/* Operand printed as pc-relative symbol */
-#define OPERAND_SIGNED	0x100	/* Operand printed as signed value */
-#define OPERAND_LENGTH	0x200	/* Operand printed as length (+1) */
-
 enum {
 	UNUSED,	/* Indicates the end of the operand list */
 	R_8,	/* GPR starting at position 8 */
@@ -155,19 +145,7 @@
 	INSTR_S_00, INSTR_S_RD,
 };
 
-struct operand {
-	int bits;		/* The number of bits in the operand. */
-	int shift;		/* The number of bits to shift. */
-	int flags;		/* One bit syntax flags. */
-};
-
-struct insn {
-	const char name[5];
-	unsigned char opfrag;
-	unsigned char format;
-};
-
-static const struct operand operands[] =
+static const struct s390_operand operands[] =
 {
 	[UNUSED]  = { 0, 0, 0 },
 	[R_8]	 = {  4,  8, OPERAND_GPR },
@@ -479,7 +457,7 @@
 	[LONG_INSN_PCISTB] = "pcistb",
 };
 
-static struct insn opcode[] = {
+static struct s390_insn opcode[] = {
 #ifdef CONFIG_64BIT
 	{ "bprp", 0xc5, INSTR_MII_UPI },
 	{ "bpp", 0xc7, INSTR_SMI_U0RDP },
@@ -668,7 +646,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_01[] = {
+static struct s390_insn opcode_01[] = {
 #ifdef CONFIG_64BIT
 	{ "ptff", 0x04, INSTR_E },
 	{ "pfpo", 0x0a, INSTR_E },
@@ -684,7 +662,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_a5[] = {
+static struct s390_insn opcode_a5[] = {
 #ifdef CONFIG_64BIT
 	{ "iihh", 0x00, INSTR_RI_RU },
 	{ "iihl", 0x01, INSTR_RI_RU },
@@ -706,7 +684,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_a7[] = {
+static struct s390_insn opcode_a7[] = {
 #ifdef CONFIG_64BIT
 	{ "tmhh", 0x02, INSTR_RI_RU },
 	{ "tmhl", 0x03, INSTR_RI_RU },
@@ -728,7 +706,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_aa[] = {
+static struct s390_insn opcode_aa[] = {
 #ifdef CONFIG_64BIT
 	{ { 0, LONG_INSN_RINEXT }, 0x00, INSTR_RI_RI },
 	{ "rion", 0x01, INSTR_RI_RI },
@@ -739,7 +717,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_b2[] = {
+static struct s390_insn opcode_b2[] = {
 #ifdef CONFIG_64BIT
 	{ "stckf", 0x7c, INSTR_S_RD },
 	{ "lpp", 0x80, INSTR_S_RD },
@@ -851,7 +829,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_b3[] = {
+static struct s390_insn opcode_b3[] = {
 #ifdef CONFIG_64BIT
 	{ "maylr", 0x38, INSTR_RRF_F0FF },
 	{ "mylr", 0x39, INSTR_RRF_F0FF },
@@ -1034,7 +1012,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_b9[] = {
+static struct s390_insn opcode_b9[] = {
 #ifdef CONFIG_64BIT
 	{ "lpgr", 0x00, INSTR_RRE_RR },
 	{ "lngr", 0x01, INSTR_RRE_RR },
@@ -1167,7 +1145,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c0[] = {
+static struct s390_insn opcode_c0[] = {
 #ifdef CONFIG_64BIT
 	{ "lgfi", 0x01, INSTR_RIL_RI },
 	{ "xihf", 0x06, INSTR_RIL_RU },
@@ -1187,7 +1165,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c2[] = {
+static struct s390_insn opcode_c2[] = {
 #ifdef CONFIG_64BIT
 	{ "msgfi", 0x00, INSTR_RIL_RI },
 	{ "msfi", 0x01, INSTR_RIL_RI },
@@ -1205,7 +1183,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c4[] = {
+static struct s390_insn opcode_c4[] = {
 #ifdef CONFIG_64BIT
 	{ "llhrl", 0x02, INSTR_RIL_RP },
 	{ "lghrl", 0x04, INSTR_RIL_RP },
@@ -1222,7 +1200,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c6[] = {
+static struct s390_insn opcode_c6[] = {
 #ifdef CONFIG_64BIT
 	{ "exrl", 0x00, INSTR_RIL_RP },
 	{ "pfdrl", 0x02, INSTR_RIL_UP },
@@ -1240,7 +1218,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c8[] = {
+static struct s390_insn opcode_c8[] = {
 #ifdef CONFIG_64BIT
 	{ "mvcos", 0x00, INSTR_SSF_RRDRD },
 	{ "ectg", 0x01, INSTR_SSF_RRDRD },
@@ -1251,7 +1229,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_cc[] = {
+static struct s390_insn opcode_cc[] = {
 #ifdef CONFIG_64BIT
 	{ "brcth", 0x06, INSTR_RIL_RP },
 	{ "aih", 0x08, INSTR_RIL_RI },
@@ -1263,7 +1241,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_e3[] = {
+static struct s390_insn opcode_e3[] = {
 #ifdef CONFIG_64BIT
 	{ "ltg", 0x02, INSTR_RXY_RRRD },
 	{ "lrag", 0x03, INSTR_RXY_RRRD },
@@ -1369,7 +1347,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_e5[] = {
+static struct s390_insn opcode_e5[] = {
 #ifdef CONFIG_64BIT
 	{ "strag", 0x02, INSTR_SSE_RDRD },
 	{ "mvhhi", 0x44, INSTR_SIL_RDI },
@@ -1391,7 +1369,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_eb[] = {
+static struct s390_insn opcode_eb[] = {
 #ifdef CONFIG_64BIT
 	{ "lmg", 0x04, INSTR_RSY_RRRD },
 	{ "srag", 0x0a, INSTR_RSY_RRRD },
@@ -1465,7 +1443,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_ec[] = {
+static struct s390_insn opcode_ec[] = {
 #ifdef CONFIG_64BIT
 	{ "brxhg", 0x44, INSTR_RIE_RRP },
 	{ "brxlg", 0x45, INSTR_RIE_RRP },
@@ -1504,7 +1482,7 @@
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_ed[] = {
+static struct s390_insn opcode_ed[] = {
 #ifdef CONFIG_64BIT
 	{ "mayl", 0x38, INSTR_RXF_FRRDF },
 	{ "myl", 0x39, INSTR_RXF_FRRDF },
@@ -1572,7 +1550,7 @@
 
 /* Extracts an operand value from an instruction.  */
 static unsigned int extract_operand(unsigned char *code,
-				    const struct operand *operand)
+				    const struct s390_operand *operand)
 {
 	unsigned int val;
 	int bits;
@@ -1608,16 +1586,11 @@
 	return val;
 }
 
-static inline int insn_length(unsigned char code)
-{
-	return ((((int) code + 64) >> 7) + 1) << 1;
-}
-
-static struct insn *find_insn(unsigned char *code)
+struct s390_insn *find_insn(unsigned char *code)
 {
 	unsigned char opfrag = code[1];
 	unsigned char opmask;
-	struct insn *table;
+	struct s390_insn *table;
 
 	switch (code[0]) {
 	case 0x01:
@@ -1706,7 +1679,7 @@
  */
 int insn_to_mnemonic(unsigned char *instruction, char *buf, unsigned int len)
 {
-	struct insn *insn;
+	struct s390_insn *insn;
 
 	insn = find_insn(instruction);
 	if (!insn)
@@ -1722,9 +1695,9 @@
 
 static int print_insn(char *buffer, unsigned char *code, unsigned long addr)
 {
-	struct insn *insn;
+	struct s390_insn *insn;
 	const unsigned char *ops;
-	const struct operand *operand;
+	const struct s390_operand *operand;
 	unsigned int value;
 	char separator;
 	char *ptr;
diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c
index 99e7f60..e6af940 100644
--- a/arch/s390/kernel/dumpstack.c
+++ b/arch/s390/kernel/dumpstack.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <asm/processor.h>
 #include <asm/debug.h>
+#include <asm/dis.h>
 #include <asm/ipl.h>
 
 #ifndef CONFIG_64BIT
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index dc8770d..96543ac 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -206,6 +206,7 @@
  */
 static noinline __init void init_kernel_storage_key(void)
 {
+#if PAGE_DEFAULT_KEY
 	unsigned long end_pfn, init_pfn;
 
 	end_pfn = PFN_UP(__pa(&_end));
@@ -213,6 +214,7 @@
 	for (init_pfn = 0 ; init_pfn < end_pfn; init_pfn++)
 		page_set_storage_key(init_pfn << PAGE_SHIFT,
 				     PAGE_DEFAULT_KEY, 0);
+#endif
 }
 
 static __initdata char sysinfo_page[PAGE_SIZE] __aligned(PAGE_SIZE);
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index e9b04c3..cb533f7 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -23,7 +23,6 @@
 
 void do_protection_exception(struct pt_regs *regs);
 void do_dat_exception(struct pt_regs *regs);
-void do_asce_exception(struct pt_regs *regs);
 
 void addressing_exception(struct pt_regs *regs);
 void data_exception(struct pt_regs *regs);
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 1014ad5..224db03 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -151,14 +151,13 @@
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
 	ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
+	trace.func = ip;
+	trace.depth = current->curr_ret_stack + 1;
+	/* Only trace if the calling function expects to. */
+	if (!ftrace_graph_entry(&trace))
+		goto out;
 	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
 		goto out;
-	trace.func = ip;
-	/* Only trace if the calling function expects to. */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		goto out;
-	}
 	parent = (unsigned long) return_to_handler;
 out:
 	return parent;
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index fd8db63..429afcc 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -437,7 +437,7 @@
 
 #if defined(CONFIG_64BIT)
 #if defined(CONFIG_MARCH_ZEC12)
-	.long 3, 0xc100efe3, 0xf46ce000, 0x00400000
+	.long 3, 0xc100efe3, 0xf46ce800, 0x00400000
 #elif defined(CONFIG_MARCH_Z196)
 	.long 2, 0xc100efe3, 0xf46c0000
 #elif defined(CONFIG_MARCH_Z10)
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index feb719d..633ca75 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2051,12 +2051,12 @@
 	__ctl_clear_bit(0,28);
 
 	/* Set new machine check handler */
-	S390_lowcore.mcck_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT;
+	S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.mcck_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler;
 
 	/* Set new program check handler */
-	S390_lowcore.program_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT;
+	S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.program_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
 
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 8ac2097..bb27a26 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -157,39 +157,29 @@
 /*
  * Switch to the asynchronous interrupt stack for softirq execution.
  */
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags, old, new;
+	unsigned long old, new;
 
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending()) {
-		/* Get current stack pointer. */
-		asm volatile("la %0,0(15)" : "=a" (old));
-		/* Check against async. stack address range. */
-		new = S390_lowcore.async_stack;
-		if (((new - old) >> (PAGE_SHIFT + THREAD_ORDER)) != 0) {
-			/* Need to switch to the async. stack. */
-			new -= STACK_FRAME_OVERHEAD;
-			((struct stack_frame *) new)->back_chain = old;
-
-			asm volatile("   la    15,0(%0)\n"
-				     "   basr  14,%2\n"
-				     "   la    15,0(%1)\n"
-				     : : "a" (new), "a" (old),
-				         "a" (__do_softirq)
-				     : "0", "1", "2", "3", "4", "5", "14",
-				       "cc", "memory" );
-		} else {
-			/* We are already on the async stack. */
-			__do_softirq();
-		}
+	/* Get current stack pointer. */
+	asm volatile("la %0,0(15)" : "=a" (old));
+	/* Check against async. stack address range. */
+	new = S390_lowcore.async_stack;
+	if (((new - old) >> (PAGE_SHIFT + THREAD_ORDER)) != 0) {
+		/* Need to switch to the async. stack. */
+		new -= STACK_FRAME_OVERHEAD;
+		((struct stack_frame *) new)->back_chain = old;
+		asm volatile("   la    15,0(%0)\n"
+			     "   basr  14,%2\n"
+			     "   la    15,0(%1)\n"
+			     : : "a" (new), "a" (old),
+			         "a" (__do_softirq)
+			     : "0", "1", "2", "3", "4", "5", "14",
+			       "cc", "memory" );
+	} else {
+		/* We are already on the async stack. */
+		__do_softirq();
 	}
-
-	local_irq_restore(flags);
 }
 
 /*
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index d86e64e..59a9c35 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -26,11 +26,12 @@
 #include <linux/stop_machine.h>
 #include <linux/kdebug.h>
 #include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/hardirq.h>
+#include <asm/cacheflush.h>
+#include <asm/sections.h>
+#include <asm/dis.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe);
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -59,6 +60,8 @@
 
 static int __kprobes is_prohibited_opcode(kprobe_opcode_t *insn)
 {
+	if (!is_known_insn((unsigned char *)insn))
+		return -EINVAL;
 	switch (insn[0] >> 8) {
 	case 0x0c:	/* bassm */
 	case 0x0b:	/* bsm	 */
@@ -208,7 +211,7 @@
 	s64 disp, new_disp;
 	u64 addr, new_addr;
 
-	memcpy(p->ainsn.insn, p->addr, ((p->opcode >> 14) + 3) & -2);
+	memcpy(p->ainsn.insn, p->addr, insn_length(p->opcode >> 8));
 	if (!is_insn_relative_long(p->ainsn.insn))
 		return;
 	/*
@@ -252,7 +255,7 @@
 	p->ainsn.insn = NULL;
 	if (is_kernel_addr(p->addr))
 		p->ainsn.insn = get_dmainsn_slot();
-	if (is_module_addr(p->addr))
+	else if (is_module_addr(p->addr))
 		p->ainsn.insn = get_insn_slot();
 	return p->ainsn.insn ? 0 : -ENOMEM;
 }
@@ -608,7 +611,7 @@
 		ip += (unsigned long) p->addr - (unsigned long) p->ainsn.insn;
 
 	if (fixup & FIXUP_BRANCH_NOT_TAKEN) {
-		int ilen = ((p->ainsn.insn[0] >> 14) + 3) & -2;
+		int ilen = insn_length(p->ainsn.insn[0] >> 8);
 		if (ip - (unsigned long) p->ainsn.insn == ilen)
 			ip = (unsigned long) p->addr + ilen;
 	}
diff --git a/arch/s390/kernel/pgm_check.S b/arch/s390/kernel/pgm_check.S
index 14bdecb..4a460c4 100644
--- a/arch/s390/kernel/pgm_check.S
+++ b/arch/s390/kernel/pgm_check.S
@@ -78,7 +78,7 @@
 PGM_CHECK_DEFAULT			/* 35 */
 PGM_CHECK_DEFAULT			/* 36 */
 PGM_CHECK_DEFAULT			/* 37 */
-PGM_CHECK_64BIT(do_asce_exception)	/* 38 */
+PGM_CHECK_DEFAULT			/* 38 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 39 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3a */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3b */
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index c5dbb33..7ed0d4e 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -139,7 +139,7 @@
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		/* kernel thread */
 		memset(&frame->childregs, 0, sizeof(struct pt_regs));
-		frame->childregs.psw.mask = psw_kernel_bits | PSW_MASK_DAT |
+		frame->childregs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT |
 				PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 		frame->childregs.psw.addr = PSW_ADDR_AMODE |
 				(unsigned long) kernel_thread_starter;
@@ -165,7 +165,8 @@
 	 * save fprs to current->thread.fp_regs to merge them with
 	 * the emulated registers and then copy the result to the child.
 	 */
-	save_fp_regs(&current->thread.fp_regs);
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
 	memcpy(&p->thread.fp_regs, &current->thread.fp_regs,
 	       sizeof(s390_fp_regs));
 	/* Set a new TLS ?  */
@@ -173,7 +174,9 @@
 		p->thread.acrs[0] = frame->childregs.gprs[6];
 #else /* CONFIG_64BIT */
 	/* Save the fpu registers to new thread structure. */
-	save_fp_regs(&p->thread.fp_regs);
+	save_fp_ctl(&p->thread.fp_regs.fpc);
+	save_fp_regs(p->thread.fp_regs.fprs);
+	p->thread.fp_regs.pad = 0;
 	/* Set a new TLS ?  */
 	if (clone_flags & CLONE_SETTLS) {
 		unsigned long tls = frame->childregs.gprs[6];
@@ -205,10 +208,12 @@
 	 * save fprs to current->thread.fp_regs to merge them with
 	 * the emulated registers and then copy the result to the dump.
 	 */
-	save_fp_regs(&current->thread.fp_regs);
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
 	memcpy(fpregs, &current->thread.fp_regs, sizeof(s390_fp_regs));
 #else /* CONFIG_64BIT */
-	save_fp_regs(fpregs);
+	save_fp_ctl(&fpregs->fpc);
+	save_fp_regs(fpregs->fprs);
 #endif /* CONFIG_64BIT */
 	return 1;
 }
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 9556905..e65c91c 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -198,9 +198,11 @@
 		 * psw and gprs are stored on the stack
 		 */
 		tmp = *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr);
-		if (addr == (addr_t) &dummy->regs.psw.mask)
+		if (addr == (addr_t) &dummy->regs.psw.mask) {
 			/* Return a clean psw mask. */
-			tmp = psw_user_bits | (tmp & PSW_MASK_USER);
+			tmp &= PSW_MASK_USER | PSW_MASK_RI;
+			tmp |= PSW_USER_BITS;
+		}
 
 	} else if (addr < (addr_t) &dummy->regs.orig_gpr2) {
 		/*
@@ -239,8 +241,7 @@
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
 		if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
-			tmp &= (unsigned long) FPC_VALID_MASK
-				<< (BITS_PER_LONG - 32);
+			tmp <<= BITS_PER_LONG - 32;
 
 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
 		/*
@@ -321,11 +322,15 @@
 		/*
 		 * psw and gprs are stored on the stack
 		 */
-		if (addr == (addr_t) &dummy->regs.psw.mask &&
-		    ((data & ~PSW_MASK_USER) != psw_user_bits ||
-		     ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA))))
-			/* Invalid psw mask. */
-			return -EINVAL;
+		if (addr == (addr_t) &dummy->regs.psw.mask) {
+			unsigned long mask = PSW_MASK_USER;
+
+			mask |= is_ri_task(child) ? PSW_MASK_RI : 0;
+			if ((data & ~mask) != PSW_USER_BITS)
+				return -EINVAL;
+			if ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA))
+				return -EINVAL;
+		}
 		*(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data;
 
 	} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) {
@@ -363,10 +368,10 @@
 		/*
 		 * floating point regs. are stored in the thread structure
 		 */
-		if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
-		    (data & ~((unsigned long) FPC_VALID_MASK
-			      << (BITS_PER_LONG - 32))) != 0)
-			return -EINVAL;
+		if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
+			if ((unsigned int) data != 0 ||
+			    test_fp_ctl(data >> (BITS_PER_LONG - 32)))
+				return -EINVAL;
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
 
@@ -557,7 +562,8 @@
 		if (addr == (addr_t) &dummy32->regs.psw.mask) {
 			/* Fake a 31 bit psw mask. */
 			tmp = (__u32)(regs->psw.mask >> 32);
-			tmp = psw32_user_bits | (tmp & PSW32_MASK_USER);
+			tmp &= PSW32_MASK_USER | PSW32_MASK_RI;
+			tmp |= PSW32_USER_BITS;
 		} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
 			/* Fake a 31 bit psw address. */
 			tmp = (__u32) regs->psw.addr |
@@ -654,13 +660,16 @@
 		 * psw, gprs, acrs and orig_gpr2 are stored on the stack
 		 */
 		if (addr == (addr_t) &dummy32->regs.psw.mask) {
+			__u32 mask = PSW32_MASK_USER;
+
+			mask |= is_ri_task(child) ? PSW32_MASK_RI : 0;
 			/* Build a 64 bit psw mask from 31 bit mask. */
-			if ((tmp & ~PSW32_MASK_USER) != psw32_user_bits)
+			if ((tmp & ~mask) != PSW32_USER_BITS)
 				/* Invalid psw mask. */
 				return -EINVAL;
 			regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
 				(regs->psw.mask & PSW_MASK_BA) |
-				(__u64)(tmp & PSW32_MASK_USER) << 32;
+				(__u64)(tmp & mask) << 32;
 		} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
 			/* Build a 64 bit psw address from 31 bit address. */
 			regs->psw.addr = (__u64) tmp & PSW32_ADDR_INSN;
@@ -696,8 +705,7 @@
 		 * floating point regs. are stored in the thread structure 
 		 */
 		if (addr == (addr_t) &dummy32->regs.fp_regs.fpc &&
-		    (tmp & ~FPC_VALID_MASK) != 0)
-			/* Invalid floating point control. */
+		    test_fp_ctl(tmp))
 			return -EINVAL;
 	        offset = addr - (addr_t) &dummy32->regs.fp_regs;
 		*(__u32 *)((addr_t) &child->thread.fp_regs + offset) = tmp;
@@ -895,8 +903,10 @@
 			   const struct user_regset *regset, unsigned int pos,
 			   unsigned int count, void *kbuf, void __user *ubuf)
 {
-	if (target == current)
-		save_fp_regs(&target->thread.fp_regs);
+	if (target == current) {
+		save_fp_ctl(&target->thread.fp_regs.fpc);
+		save_fp_regs(target->thread.fp_regs.fprs);
+	}
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fp_regs, 0, -1);
@@ -909,19 +919,21 @@
 {
 	int rc = 0;
 
-	if (target == current)
-		save_fp_regs(&target->thread.fp_regs);
+	if (target == current) {
+		save_fp_ctl(&target->thread.fp_regs.fpc);
+		save_fp_regs(target->thread.fp_regs.fprs);
+	}
 
 	/* If setting FPC, must validate it first. */
 	if (count > 0 && pos < offsetof(s390_fp_regs, fprs)) {
-		u32 fpc[2] = { target->thread.fp_regs.fpc, 0 };
-		rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fpc,
+		u32 ufpc[2] = { target->thread.fp_regs.fpc, 0 };
+		rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ufpc,
 					0, offsetof(s390_fp_regs, fprs));
 		if (rc)
 			return rc;
-		if ((fpc[0] & ~FPC_VALID_MASK) != 0 || fpc[1] != 0)
+		if (ufpc[1] != 0 || test_fp_ctl(ufpc[0]))
 			return -EINVAL;
-		target->thread.fp_regs.fpc = fpc[0];
+		target->thread.fp_regs.fpc = ufpc[0];
 	}
 
 	if (rc == 0 && count > 0)
@@ -929,8 +941,10 @@
 					target->thread.fp_regs.fprs,
 					offsetof(s390_fp_regs, fprs), -1);
 
-	if (rc == 0 && target == current)
-		restore_fp_regs(&target->thread.fp_regs);
+	if (rc == 0 && target == current) {
+		restore_fp_ctl(&target->thread.fp_regs.fpc);
+		restore_fp_regs(target->thread.fp_regs.fprs);
+	}
 
 	return rc;
 }
diff --git a/arch/s390/kernel/runtime_instr.c b/arch/s390/kernel/runtime_instr.c
index e1c9d1c..d817cce 100644
--- a/arch/s390/kernel/runtime_instr.c
+++ b/arch/s390/kernel/runtime_instr.c
@@ -40,8 +40,6 @@
 static void init_runtime_instr_cb(struct runtime_instr_cb *cb)
 {
 	cb->buf_limit = 0xfff;
-	if (s390_user_mode == HOME_SPACE_MODE)
-		cb->home_space = 1;
 	cb->int_requested = 1;
 	cb->pstate = 1;
 	cb->pstate_set_buf = 1;
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index aeed8a6..ffe1c53 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -64,12 +64,6 @@
 #include <asm/sclp.h>
 #include "entry.h"
 
-long psw_kernel_bits	= PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_PRIMARY |
-			  PSW_MASK_EA | PSW_MASK_BA;
-long psw_user_bits	= PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT |
-			  PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK |
-			  PSW_MASK_PSTATE | PSW_ASC_HOME;
-
 /*
  * User copy operations.
  */
@@ -300,43 +294,14 @@
 }
 early_param("vmalloc", parse_vmalloc);
 
-unsigned int s390_user_mode = PRIMARY_SPACE_MODE;
-EXPORT_SYMBOL_GPL(s390_user_mode);
-
-static void __init set_user_mode_primary(void)
-{
-	psw_kernel_bits = (psw_kernel_bits & ~PSW_MASK_ASC) | PSW_ASC_HOME;
-	psw_user_bits = (psw_user_bits & ~PSW_MASK_ASC) | PSW_ASC_PRIMARY;
-#ifdef CONFIG_COMPAT
-	psw32_user_bits =
-		(psw32_user_bits & ~PSW32_MASK_ASC) | PSW32_ASC_PRIMARY;
-#endif
-	uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos_switch : uaccess_pt;
-}
-
 static int __init early_parse_user_mode(char *p)
 {
-	if (p && strcmp(p, "primary") == 0)
-		s390_user_mode = PRIMARY_SPACE_MODE;
-	else if (!p || strcmp(p, "home") == 0)
-		s390_user_mode = HOME_SPACE_MODE;
-	else
-		return 1;
-	return 0;
+	if (!p || strcmp(p, "primary") == 0)
+		return 0;
+	return 1;
 }
 early_param("user_mode", early_parse_user_mode);
 
-static void __init setup_addressing_mode(void)
-{
-	if (s390_user_mode != PRIMARY_SPACE_MODE)
-		return;
-	set_user_mode_primary();
-	if (MACHINE_HAS_MVCOS)
-		pr_info("Address spaces switched, mvcos available\n");
-	else
-		pr_info("Address spaces switched, mvcos not available\n");
-}
-
 void *restart_stack __attribute__((__section__(".data")));
 
 static void __init setup_lowcore(void)
@@ -348,24 +313,24 @@
 	 */
 	BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096);
 	lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
-	lc->restart_psw.mask = psw_kernel_bits;
+	lc->restart_psw.mask = PSW_KERNEL_BITS;
 	lc->restart_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
-	lc->external_new_psw.mask = psw_kernel_bits |
+	lc->external_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
 	lc->external_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
-	lc->svc_new_psw.mask = psw_kernel_bits |
+	lc->svc_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 	lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
-	lc->program_new_psw.mask = psw_kernel_bits |
+	lc->program_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
 	lc->program_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) pgm_check_handler;
-	lc->mcck_new_psw.mask = psw_kernel_bits;
+	lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
 	lc->mcck_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
-	lc->io_new_psw.mask = psw_kernel_bits |
+	lc->io_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
 	lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
 	lc->clock_comparator = -1ULL;
@@ -1043,10 +1008,7 @@
 	init_mm.end_data = (unsigned long) &_edata;
 	init_mm.brk = (unsigned long) &_end;
 
-	if (MACHINE_HAS_MVCOS)
-		memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess));
-	else
-		memcpy(&uaccess, &uaccess_std, sizeof(uaccess));
+	uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos : uaccess_pt;
 
 	parse_early_param();
 	detect_memory_layout(memory_chunk, memory_end);
@@ -1054,7 +1016,6 @@
 	setup_ipl();
 	reserve_oldmem();
 	setup_memory_end();
-	setup_addressing_mode();
 	reserve_crashkernel();
 	setup_memory();
 	setup_resources();
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index c45becf..fb53587 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -57,40 +57,48 @@
 
 	/* Copy a 'clean' PSW mask to the user to avoid leaking
 	   information about whether PER is currently on.  */
-	user_sregs.regs.psw.mask = psw_user_bits |
-		(regs->psw.mask & PSW_MASK_USER);
+	user_sregs.regs.psw.mask = PSW_USER_BITS |
+		(regs->psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
 	user_sregs.regs.psw.addr = regs->psw.addr;
 	memcpy(&user_sregs.regs.gprs, &regs->gprs, sizeof(sregs->regs.gprs));
 	memcpy(&user_sregs.regs.acrs, current->thread.acrs,
-	       sizeof(sregs->regs.acrs));
+	       sizeof(user_sregs.regs.acrs));
 	/* 
 	 * We have to store the fp registers to current->thread.fp_regs
 	 * to merge them with the emulated registers.
 	 */
-	save_fp_regs(&current->thread.fp_regs);
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
 	memcpy(&user_sregs.fpregs, &current->thread.fp_regs,
-	       sizeof(s390_fp_regs));
-	return __copy_to_user(sregs, &user_sregs, sizeof(_sigregs));
+	       sizeof(user_sregs.fpregs));
+	if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs)))
+		return -EFAULT;
+	return 0;
 }
 
-/* Returns positive number on error */
 static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 {
-	int err;
 	_sigregs user_sregs;
 
 	/* Alwys make any pending restarted system call return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-	err = __copy_from_user(&user_sregs, sregs, sizeof(_sigregs));
-	if (err)
-		return err;
-	/* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */
+	if (__copy_from_user(&user_sregs, sregs, sizeof(user_sregs)))
+		return -EFAULT;
+
+	if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW_MASK_RI))
+		return -EINVAL;
+
+	/* Loading the floating-point-control word can fail. Do that first. */
+	if (restore_fp_ctl(&user_sregs.fpregs.fpc))
+		return -EINVAL;
+
+	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
-		(user_sregs.regs.psw.mask & PSW_MASK_USER);
+		(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
 	/* Check for invalid user address space control. */
-	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
-		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+	if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
+		regs->psw.mask = PSW_ASC_PRIMARY |
 			(regs->psw.mask & ~PSW_MASK_ASC);
 	/* Check for invalid amode */
 	if (regs->psw.mask & PSW_MASK_EA)
@@ -98,14 +106,13 @@
 	regs->psw.addr = user_sregs.regs.psw.addr;
 	memcpy(&regs->gprs, &user_sregs.regs.gprs, sizeof(sregs->regs.gprs));
 	memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
-	       sizeof(sregs->regs.acrs));
+	       sizeof(current->thread.acrs));
 	restore_access_regs(current->thread.acrs);
 
 	memcpy(&current->thread.fp_regs, &user_sregs.fpregs,
-	       sizeof(s390_fp_regs));
-	current->thread.fp_regs.fpc &= FPC_VALID_MASK;
+	       sizeof(current->thread.fp_regs));
 
-	restore_fp_regs(&current->thread.fp_regs);
+	restore_fp_regs(current->thread.fp_regs.fprs);
 	clear_thread_flag(TIF_SYSCALL);	/* No longer in a system call */
 	return 0;
 }
@@ -224,7 +231,7 @@
 	regs->gprs[15] = (unsigned long) frame;
 	/* Force default amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
@@ -295,7 +302,7 @@
 	regs->gprs[15] = (unsigned long) frame;
 	/* Force default amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 1a4313a..dc4a534 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -283,7 +283,7 @@
 	struct _lowcore *lc = lowcore_ptr[pcpu - pcpu_devices];
 	unsigned long source_cpu = stap();
 
-	__load_psw_mask(psw_kernel_bits);
+	__load_psw_mask(PSW_KERNEL_BITS);
 	if (pcpu->address == source_cpu)
 		func(data);	/* should not return */
 	/* Stop target cpu (if func returns this stops the current cpu). */
@@ -395,7 +395,7 @@
 	int cpu;
 
 	/* Disable all interrupts/machine checks */
-	__load_psw_mask(psw_kernel_bits | PSW_MASK_DAT);
+	__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
 	trace_hardirqs_off();
 
 	debug_set_critical();
@@ -533,9 +533,6 @@
 
 #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP)
 
-struct save_area *zfcpdump_save_areas[NR_CPUS + 1];
-EXPORT_SYMBOL_GPL(zfcpdump_save_areas);
-
 static void __init smp_get_save_area(int cpu, u16 address)
 {
 	void *lc = pcpu_devices[0].lowcore;
@@ -546,15 +543,9 @@
 	if (!OLDMEM_BASE && (address == boot_cpu_address ||
 			     ipl_info.type != IPL_TYPE_FCP_DUMP))
 		return;
-	if (cpu >= NR_CPUS) {
-		pr_warning("CPU %i exceeds the maximum %i and is excluded "
-			   "from the dump\n", cpu, NR_CPUS - 1);
-		return;
-	}
-	save_area = kmalloc(sizeof(struct save_area), GFP_KERNEL);
+	save_area = dump_save_area_create(cpu);
 	if (!save_area)
 		panic("could not allocate memory for save area\n");
-	zfcpdump_save_areas[cpu] = save_area;
 #ifdef CONFIG_CRASH_DUMP
 	if (address == boot_cpu_address) {
 		/* Copy the registers of the boot cpu. */
@@ -693,7 +684,7 @@
 	S390_lowcore.restart_source = -1UL;
 	restore_access_regs(S390_lowcore.access_regs_save_area);
 	__ctl_load(S390_lowcore.cregs_save_area, 0, 15);
-	__load_psw_mask(psw_kernel_bits | PSW_MASK_DAT);
+	__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
 	cpu_init();
 	preempt_disable();
 	init_cpu_timer();
@@ -929,7 +920,7 @@
 		idle_count = ACCESS_ONCE(idle->idle_count);
 		if (ACCESS_ONCE(idle->clock_idle_enter))
 			idle_count++;
-	} while ((sequence & 1) || (idle->sequence != sequence));
+	} while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence));
 	return sprintf(buf, "%llu\n", idle_count);
 }
 static DEVICE_ATTR(idle_count, 0444, show_idle_count, NULL);
@@ -947,7 +938,7 @@
 		idle_time = ACCESS_ONCE(idle->idle_time);
 		idle_enter = ACCESS_ONCE(idle->clock_idle_enter);
 		idle_exit = ACCESS_ONCE(idle->clock_idle_exit);
-	} while ((sequence & 1) || (idle->sequence != sequence));
+	} while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence));
 	idle_time += idle_enter ? ((idle_exit ? : now) - idle_enter) : 0;
 	return sprintf(buf, "%llu\n", idle_time >> 12);
 }
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 05d75c4..a84476f 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -84,8 +84,7 @@
  */
 static void vdso_init_data(struct vdso_data *vd)
 {
-	vd->ectg_available =
-		s390_user_mode != HOME_SPACE_MODE && test_facility(31);
+	vd->ectg_available = test_facility(31);
 }
 
 #ifdef CONFIG_64BIT
@@ -102,7 +101,7 @@
 
 	lowcore->vdso_per_cpu_data = __LC_PASTE;
 
-	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (!vdso_enabled)
 		return 0;
 
 	segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER);
@@ -147,7 +146,7 @@
 	unsigned long segment_table, page_table, page_frame;
 	u32 *psal, *aste;
 
-	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (!vdso_enabled)
 		return;
 
 	psal = (u32 *)(addr_t) lowcore->paste[4];
@@ -165,7 +164,7 @@
 {
 	unsigned long cr5;
 
-	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (!vdso_enabled)
 		return;
 	cr5 = offsetof(struct _lowcore, paste);
 	__ctl_load(cr5, 5, 5);
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index abcfab5..8c34363 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -161,7 +161,7 @@
 	trace_hardirqs_on();
 
 	/* Wait for external, I/O or machine check interrupt. */
-	psw_mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_DAT |
+	psw_mask = PSW_KERNEL_BITS | PSW_MASK_WAIT | PSW_MASK_DAT |
 		PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 	idle->nohz_delay = 0;
 
@@ -191,7 +191,7 @@
 		sequence = ACCESS_ONCE(idle->sequence);
 		idle_enter = ACCESS_ONCE(idle->clock_idle_enter);
 		idle_exit = ACCESS_ONCE(idle->clock_idle_exit);
-	} while ((sequence & 1) || (idle->sequence != sequence));
+	} while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence));
 	return idle_enter ? ((idle_exit ?: now) - idle_enter) : 0;
 }
 
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 776dafe..ed8064c 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -343,10 +343,11 @@
 
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
-	save_fp_regs(&vcpu->arch.host_fpregs);
+	save_fp_ctl(&vcpu->arch.host_fpregs.fpc);
+	save_fp_regs(vcpu->arch.host_fpregs.fprs);
 	save_access_regs(vcpu->arch.host_acrs);
-	vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
-	restore_fp_regs(&vcpu->arch.guest_fpregs);
+	restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	restore_access_regs(vcpu->run->s.regs.acrs);
 	gmap_enable(vcpu->arch.gmap);
 	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
@@ -356,9 +357,11 @@
 {
 	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	gmap_disable(vcpu->arch.gmap);
-	save_fp_regs(&vcpu->arch.guest_fpregs);
+	save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	save_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	save_access_regs(vcpu->run->s.regs.acrs);
-	restore_fp_regs(&vcpu->arch.host_fpregs);
+	restore_fp_ctl(&vcpu->arch.host_fpregs.fpc);
+	restore_fp_regs(vcpu->arch.host_fpregs.fprs);
 	restore_access_regs(vcpu->arch.host_acrs);
 }
 
@@ -618,9 +621,12 @@
 
 int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
+	if (test_fp_ctl(fpu->fpc))
+		return -EINVAL;
 	memcpy(&vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
-	vcpu->arch.guest_fpregs.fpc = fpu->fpc & FPC_VALID_MASK;
-	restore_fp_regs(&vcpu->arch.guest_fpregs);
+	vcpu->arch.guest_fpregs.fpc = fpu->fpc;
+	restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	return 0;
 }
 
@@ -876,7 +882,8 @@
 	 * copying in vcpu load/put. Lets update our copies before we save
 	 * it into the save area
 	 */
-	save_fp_regs(&vcpu->arch.guest_fpregs);
+	save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	save_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	save_access_regs(vcpu->run->s.regs.acrs);
 
 	if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs),
diff --git a/arch/s390/kvm/trace.h b/arch/s390/kvm/trace.h
index c2f582bb1c..0c991c6 100644
--- a/arch/s390/kvm/trace.h
+++ b/arch/s390/kvm/trace.h
@@ -4,6 +4,7 @@
 #include <linux/tracepoint.h>
 #include <asm/sigp.h>
 #include <asm/debug.h>
+#include <asm/dis.h>
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 20b0e97..b068729 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile for s390-specific library files..
 #
 
-lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
+lib-y += delay.o string.o uaccess_pt.o find.o
 obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o mem32.o
 obj-$(CONFIG_64BIT) += mem64.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
diff --git a/arch/s390/lib/find.c b/arch/s390/lib/find.c
new file mode 100644
index 0000000..620d34d
--- /dev/null
+++ b/arch/s390/lib/find.c
@@ -0,0 +1,77 @@
+/*
+ * MSB0 numbered special bitops handling.
+ *
+ * On s390x the bits are numbered:
+ *   |0..............63|64............127|128...........191|192...........255|
+ * and on s390:
+ *   |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255|
+ *
+ * The reason for this bit numbering is the fact that the hardware sets bits
+ * in a bitmap starting at bit 0 (MSB) and we don't want to scan the bitmap
+ * from the 'wrong end'.
+ */
+
+#include <linux/compiler.h>
+#include <linux/bitops.h>
+#include <linux/export.h>
+
+unsigned long find_first_bit_inv(const unsigned long *addr, unsigned long size)
+{
+	const unsigned long *p = addr;
+	unsigned long result = 0;
+	unsigned long tmp;
+
+	while (size & ~(BITS_PER_LONG - 1)) {
+		if ((tmp = *(p++)))
+			goto found;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
+	}
+	if (!size)
+		return result;
+	tmp = (*p) & (~0UL << (BITS_PER_LONG - size));
+	if (!tmp)		/* Are any bits set? */
+		return result + size;	/* Nope. */
+found:
+	return result + (__fls(tmp) ^ (BITS_PER_LONG - 1));
+}
+EXPORT_SYMBOL(find_first_bit_inv);
+
+unsigned long find_next_bit_inv(const unsigned long *addr, unsigned long size,
+				unsigned long offset)
+{
+	const unsigned long *p = addr + (offset / BITS_PER_LONG);
+	unsigned long result = offset & ~(BITS_PER_LONG - 1);
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset %= BITS_PER_LONG;
+	if (offset) {
+		tmp = *(p++);
+		tmp &= (~0UL >> offset);
+		if (size < BITS_PER_LONG)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
+	}
+	while (size & ~(BITS_PER_LONG-1)) {
+		if ((tmp = *(p++)))
+			goto found_middle;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+found_first:
+	tmp &= (~0UL << (BITS_PER_LONG - size));
+	if (!tmp)		/* Are any bits set? */
+		return result + size;	/* Nope. */
+found_middle:
+	return result + (__fls(tmp) ^ (BITS_PER_LONG - 1));
+}
+EXPORT_SYMBOL(find_next_bit_inv);
diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c
index 1829742..4b7993b 100644
--- a/arch/s390/lib/uaccess_mvcos.c
+++ b/arch/s390/lib/uaccess_mvcos.c
@@ -65,13 +65,6 @@
 	return size;
 }
 
-static size_t copy_from_user_mvcos_check(size_t size, const void __user *ptr, void *x)
-{
-	if (size <= 256)
-		return copy_from_user_std(size, ptr, x);
-	return copy_from_user_mvcos(size, ptr, x);
-}
-
 static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
 {
 	register unsigned long reg0 asm("0") = 0x810000UL;
@@ -101,14 +94,6 @@
 	return size;
 }
 
-static size_t copy_to_user_mvcos_check(size_t size, void __user *ptr,
-				       const void *x)
-{
-	if (size <= 256)
-		return copy_to_user_std(size, ptr, x);
-	return copy_to_user_mvcos(size, ptr, x);
-}
-
 static size_t copy_in_user_mvcos(size_t size, void __user *to,
 				 const void __user *from)
 {
@@ -201,23 +186,8 @@
 }
 
 struct uaccess_ops uaccess_mvcos = {
-	.copy_from_user = copy_from_user_mvcos_check,
-	.copy_from_user_small = copy_from_user_std,
-	.copy_to_user = copy_to_user_mvcos_check,
-	.copy_to_user_small = copy_to_user_std,
-	.copy_in_user = copy_in_user_mvcos,
-	.clear_user = clear_user_mvcos,
-	.strnlen_user = strnlen_user_std,
-	.strncpy_from_user = strncpy_from_user_std,
-	.futex_atomic_op = futex_atomic_op_std,
-	.futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
-};
-
-struct uaccess_ops uaccess_mvcos_switch = {
 	.copy_from_user = copy_from_user_mvcos,
-	.copy_from_user_small = copy_from_user_mvcos,
 	.copy_to_user = copy_to_user_mvcos,
-	.copy_to_user_small = copy_to_user_mvcos,
 	.copy_in_user = copy_in_user_mvcos,
 	.clear_user = clear_user_mvcos,
 	.strnlen_user = strnlen_user_mvcos,
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 1694d73..97e03ca 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -461,9 +461,7 @@
 
 struct uaccess_ops uaccess_pt = {
 	.copy_from_user		= copy_from_user_pt,
-	.copy_from_user_small	= copy_from_user_pt,
 	.copy_to_user		= copy_to_user_pt,
-	.copy_to_user_small	= copy_to_user_pt,
 	.copy_in_user		= copy_in_user_pt,
 	.clear_user		= clear_user_pt,
 	.strnlen_user		= strnlen_user_pt,
diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c
deleted file mode 100644
index 4a75d47..0000000
--- a/arch/s390/lib/uaccess_std.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- *  Standard user space access functions based on mvcp/mvcs and doing
- *  interesting things in the secondary space mode.
- *
- *    Copyright IBM Corp. 2006
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *		 Gerald Schaefer (gerald.schaefer@de.ibm.com)
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <asm/futex.h>
-#include "uaccess.h"
-
-#ifndef CONFIG_64BIT
-#define AHI	"ahi"
-#define ALR	"alr"
-#define CLR	"clr"
-#define LHI	"lhi"
-#define SLR	"slr"
-#else
-#define AHI	"aghi"
-#define ALR	"algr"
-#define CLR	"clgr"
-#define LHI	"lghi"
-#define SLR	"slgr"
-#endif
-
-size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
-{
-	unsigned long tmp1, tmp2;
-
-	tmp1 = -256UL;
-	asm volatile(
-		"0: mvcp  0(%0,%2),0(%1),%3\n"
-		"10:jz    8f\n"
-		"1:"ALR"  %0,%3\n"
-		"   la    %1,256(%1)\n"
-		"   la    %2,256(%2)\n"
-		"2: mvcp  0(%0,%2),0(%1),%3\n"
-		"11:jnz   1b\n"
-		"   j     8f\n"
-		"3: la    %4,255(%1)\n"	/* %4 = ptr + 255 */
-		"  "LHI"  %3,-4096\n"
-		"   nr    %4,%3\n"	/* %4 = (ptr + 255) & -4096 */
-		"  "SLR"  %4,%1\n"
-		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
-		"   jnh   5f\n"
-		"4: mvcp  0(%4,%2),0(%1),%3\n"
-		"12:"SLR"  %0,%4\n"
-		"  "ALR"  %2,%4\n"
-		"5:"LHI"  %4,-1\n"
-		"  "ALR"  %4,%0\n"	/* copy remaining size, subtract 1 */
-		"   bras  %3,7f\n"	/* memset loop */
-		"   xc    0(1,%2),0(%2)\n"
-		"6: xc    0(256,%2),0(%2)\n"
-		"   la    %2,256(%2)\n"
-		"7:"AHI"  %4,-256\n"
-		"   jnm   6b\n"
-		"   ex    %4,0(%3)\n"
-		"   j     9f\n"
-		"8:"SLR"  %0,%0\n"
-		"9: \n"
-		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b)
-		EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b)
-		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
-		: : "cc", "memory");
-	return size;
-}
-
-static size_t copy_from_user_std_check(size_t size, const void __user *ptr,
-				       void *x)
-{
-	if (size <= 1024)
-		return copy_from_user_std(size, ptr, x);
-	return copy_from_user_pt(size, ptr, x);
-}
-
-size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
-{
-	unsigned long tmp1, tmp2;
-
-	tmp1 = -256UL;
-	asm volatile(
-		"0: mvcs  0(%0,%1),0(%2),%3\n"
-		"7: jz    5f\n"
-		"1:"ALR"  %0,%3\n"
-		"   la    %1,256(%1)\n"
-		"   la    %2,256(%2)\n"
-		"2: mvcs  0(%0,%1),0(%2),%3\n"
-		"8: jnz   1b\n"
-		"   j     5f\n"
-		"3: la    %4,255(%1)\n" /* %4 = ptr + 255 */
-		"  "LHI"  %3,-4096\n"
-		"   nr    %4,%3\n"	/* %4 = (ptr + 255) & -4096 */
-		"  "SLR"  %4,%1\n"
-		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
-		"   jnh   6f\n"
-		"4: mvcs  0(%4,%1),0(%2),%3\n"
-		"9:"SLR"  %0,%4\n"
-		"   j     6f\n"
-		"5:"SLR"  %0,%0\n"
-		"6: \n"
-		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b)
-		EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b)
-		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
-		: : "cc", "memory");
-	return size;
-}
-
-static size_t copy_to_user_std_check(size_t size, void __user *ptr,
-				     const void *x)
-{
-	if (size <= 1024)
-		return copy_to_user_std(size, ptr, x);
-	return copy_to_user_pt(size, ptr, x);
-}
-
-static size_t copy_in_user_std(size_t size, void __user *to,
-			       const void __user *from)
-{
-	unsigned long tmp1;
-
-	asm volatile(
-		"   sacf  256\n"
-		"  "AHI"  %0,-1\n"
-		"   jo    5f\n"
-		"   bras  %3,3f\n"
-		"0:"AHI"  %0,257\n"
-		"1: mvc   0(1,%1),0(%2)\n"
-		"   la    %1,1(%1)\n"
-		"   la    %2,1(%2)\n"
-		"  "AHI"  %0,-1\n"
-		"   jnz   1b\n"
-		"   j     5f\n"
-		"2: mvc   0(256,%1),0(%2)\n"
-		"   la    %1,256(%1)\n"
-		"   la    %2,256(%2)\n"
-		"3:"AHI"  %0,-256\n"
-		"   jnm   2b\n"
-		"4: ex    %0,1b-0b(%3)\n"
-		"5: "SLR"  %0,%0\n"
-		"6: sacf  0\n"
-		EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
-		: "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1)
-		: : "cc", "memory");
-	return size;
-}
-
-static size_t clear_user_std(size_t size, void __user *to)
-{
-	unsigned long tmp1, tmp2;
-
-	asm volatile(
-		"   sacf  256\n"
-		"  "AHI"  %0,-1\n"
-		"   jo    5f\n"
-		"   bras  %3,3f\n"
-		"   xc    0(1,%1),0(%1)\n"
-		"0:"AHI"  %0,257\n"
-		"   la    %2,255(%1)\n" /* %2 = ptr + 255 */
-		"   srl   %2,12\n"
-		"   sll   %2,12\n"	/* %2 = (ptr + 255) & -4096 */
-		"  "SLR"  %2,%1\n"
-		"  "CLR"  %0,%2\n"	/* clear crosses next page boundary? */
-		"   jnh   5f\n"
-		"  "AHI"  %2,-1\n"
-		"1: ex    %2,0(%3)\n"
-		"  "AHI"  %2,1\n"
-		"  "SLR"  %0,%2\n"
-		"   j     5f\n"
-		"2: xc    0(256,%1),0(%1)\n"
-		"   la    %1,256(%1)\n"
-		"3:"AHI"  %0,-256\n"
-		"   jnm   2b\n"
-		"4: ex    %0,0(%3)\n"
-		"5: "SLR"  %0,%0\n"
-		"6: sacf  0\n"
-		EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
-		: "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2)
-		: : "cc", "memory");
-	return size;
-}
-
-size_t strnlen_user_std(size_t size, const char __user *src)
-{
-	register unsigned long reg0 asm("0") = 0UL;
-	unsigned long tmp1, tmp2;
-
-	if (unlikely(!size))
-		return 0;
-	asm volatile(
-		"   la    %2,0(%1)\n"
-		"   la    %3,0(%0,%1)\n"
-		"  "SLR"  %0,%0\n"
-		"   sacf  256\n"
-		"0: srst  %3,%2\n"
-		"   jo    0b\n"
-		"   la    %0,1(%3)\n"	/* strnlen_user results includes \0 */
-		"  "SLR"  %0,%1\n"
-		"1: sacf  0\n"
-		EX_TABLE(0b,1b)
-		: "+a" (size), "+a" (src), "=a" (tmp1), "=a" (tmp2)
-		: "d" (reg0) : "cc", "memory");
-	return size;
-}
-
-size_t strncpy_from_user_std(size_t count, const char __user *src, char *dst)
-{
-	size_t done, len, offset, len_str;
-
-	if (unlikely(!count))
-		return 0;
-	done = 0;
-	do {
-		offset = (size_t)src & ~PAGE_MASK;
-		len = min(count - done, PAGE_SIZE - offset);
-		if (copy_from_user_std(len, src, dst))
-			return -EFAULT;
-		len_str = strnlen(dst, len);
-		done += len_str;
-		src += len_str;
-		dst += len_str;
-	} while ((len_str == len) && (done < count));
-	return done;
-}
-
-#define __futex_atomic_op(insn, ret, oldval, newval, uaddr, oparg)	\
-	asm volatile(							\
-		"   sacf  256\n"					\
-		"0: l     %1,0(%6)\n"					\
-		"1:"insn						\
-		"2: cs    %1,%2,0(%6)\n"				\
-		"3: jl    1b\n"						\
-		"   lhi   %0,0\n"					\
-		"4: sacf  0\n"						\
-		EX_TABLE(0b,4b) EX_TABLE(2b,4b) EX_TABLE(3b,4b)		\
-		: "=d" (ret), "=&d" (oldval), "=&d" (newval),		\
-		  "=m" (*uaddr)						\
-		: "0" (-EFAULT), "d" (oparg), "a" (uaddr),		\
-		  "m" (*uaddr) : "cc");
-
-int futex_atomic_op_std(int op, u32 __user *uaddr, int oparg, int *old)
-{
-	int oldval = 0, newval, ret;
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("lr %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("lr %2,%1\nar %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("lr %2,%1\nor %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("lr %2,%1\nnr %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("lr %2,%1\nxr %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-	*old = oldval;
-	return ret;
-}
-
-int futex_atomic_cmpxchg_std(u32 *uval, u32 __user *uaddr,
-			     u32 oldval, u32 newval)
-{
-	int ret;
-
-	asm volatile(
-		"   sacf 256\n"
-		"0: cs   %1,%4,0(%5)\n"
-		"1: la   %0,0\n"
-		"2: sacf 0\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
-		: "=d" (ret), "+d" (oldval), "=m" (*uaddr)
-		: "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr)
-		: "cc", "memory" );
-	*uval = oldval;
-	return ret;
-}
-
-struct uaccess_ops uaccess_std = {
-	.copy_from_user = copy_from_user_std_check,
-	.copy_from_user_small = copy_from_user_std,
-	.copy_to_user = copy_to_user_std_check,
-	.copy_to_user_small = copy_to_user_std,
-	.copy_in_user = copy_in_user_std,
-	.clear_user = clear_user_std,
-	.strnlen_user = strnlen_user_std,
-	.strncpy_from_user = strncpy_from_user_std,
-	.futex_atomic_op = futex_atomic_op_std,
-	.futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
-};
diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c
index 58bff54..a6ba0d7 100644
--- a/arch/s390/math-emu/math.c
+++ b/arch/s390/math-emu/math.c
@@ -19,6 +19,8 @@
 #include <math-emu/double.h>
 #include <math-emu/quad.h>
 
+#define FPC_VALID_MASK		0xF8F8FF03
+
 /*
  * I miss a macro to round a floating point number to the
  * nearest integer in the same floating point format.
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 9d84a1f..79ddd58 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -253,12 +253,12 @@
 
 static struct ctl_table cmm_table[];
 
-static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer,
-			     size_t *lenp, loff_t *ppos)
+static int cmm_pages_handler(struct ctl_table *ctl, int write,
+			     void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char buf[16], *p;
+	unsigned int len;
 	long nr;
-	int len;
 
 	if (!*lenp || (*ppos && !write)) {
 		*lenp = 0;
@@ -293,12 +293,12 @@
 	return 0;
 }
 
-static int cmm_timeout_handler(ctl_table *ctl, int write,  void __user *buffer,
-			       size_t *lenp, loff_t *ppos)
+static int cmm_timeout_handler(struct ctl_table *ctl, int write,
+			       void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char buf[64], *p;
 	long nr, seconds;
-	int len;
+	unsigned int len;
 
 	if (!*lenp || (*ppos && !write)) {
 		*lenp = 0;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index fc66792..d95265b2 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -115,13 +115,8 @@
 	if (trans_exc_code == 2)
 		/* Access via secondary space, set_fs setting decides */
 		return current->thread.mm_segment.ar4;
-	if (s390_user_mode == HOME_SPACE_MODE)
-		/* User space if the access has been done via home space. */
-		return trans_exc_code == 3;
 	/*
-	 * If the user space is not the home space the kernel runs in home
-	 * space. Access via secondary space has already been covered,
-	 * access via primary space or access register is from user space
+	 * Access via primary space or access register is from user space
 	 * and access via home space is from the kernel.
 	 */
 	return trans_exc_code != 3;
@@ -428,50 +423,13 @@
 		do_fault_error(regs, fault);
 }
 
-#ifdef CONFIG_64BIT
-void __kprobes do_asce_exception(struct pt_regs *regs)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	unsigned long trans_exc_code;
-
-	/*
-	 * The instruction that caused the program check has
-	 * been nullified. Don't signal single step via SIGTRAP.
-	 */
-	clear_tsk_thread_flag(current, TIF_PER_TRAP);
-
-	trans_exc_code = regs->int_parm_long;
-	if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm))
-		goto no_context;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, trans_exc_code & __FAIL_ADDR_MASK);
-	up_read(&mm->mmap_sem);
-
-	if (vma) {
-		update_mm(mm, current);
-		return;
-	}
-
-	/* User mode accesses just cause a SIGSEGV */
-	if (user_mode(regs)) {
-		do_sigsegv(regs, SEGV_MAPERR);
-		return;
-	}
-
-no_context:
-	do_no_context(regs);
-}
-#endif
-
 int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write)
 {
 	struct pt_regs regs;
 	int access, fault;
 
 	/* Emulate a uaccess fault from kernel mode. */
-	regs.psw.mask = psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK;
+	regs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK;
 	if (!irqs_disabled())
 		regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT;
 	regs.psw.addr = (unsigned long) __builtin_return_address(0);
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 5d758db..639fce46 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -180,9 +180,15 @@
 	addr = start;
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 	end = start + len;
-	if ((end < start) || (end > TASK_SIZE))
+	if ((end <= start) || (end > TASK_SIZE))
 		return 0;
-
+	/*
+	 * local_irq_save() doesn't prevent pagetable teardown, but does
+	 * prevent the pagetables from being freed on s390.
+	 *
+	 * So long as we atomically load page table pointers versus teardown,
+	 * we can follow the address down to the the page and take a ref on it.
+	 */
 	local_irq_save(flags);
 	pgdp = pgd_offset(mm, addr);
 	do {
@@ -219,63 +225,22 @@
 			struct page **pages)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long addr, len, end;
-	unsigned long next;
-	pgd_t *pgdp, pgd;
-	int nr = 0;
+	int nr, ret;
 
 	start &= PAGE_MASK;
-	addr = start;
-	len = (unsigned long) nr_pages << PAGE_SHIFT;
-	end = start + len;
-	if ((end < start) || (end > TASK_SIZE))
-		goto slow_irqon;
+	nr = __get_user_pages_fast(start, nr_pages, write, pages);
+	if (nr == nr_pages)
+		return nr;
 
-	/*
-	 * local_irq_disable() doesn't prevent pagetable teardown, but does
-	 * prevent the pagetables from being freed on s390.
-	 *
-	 * So long as we atomically load page table pointers versus teardown,
-	 * we can follow the address down to the the page and take a ref on it.
-	 */
-	local_irq_disable();
-	pgdp = pgd_offset(mm, addr);
-	do {
-		pgd = *pgdp;
-		barrier();
-		next = pgd_addr_end(addr, end);
-		if (pgd_none(pgd))
-			goto slow;
-		if (!gup_pud_range(pgdp, pgd, addr, next, write, pages, &nr))
-			goto slow;
-	} while (pgdp++, addr = next, addr != end);
-	local_irq_enable();
-
-	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
-	return nr;
-
-	{
-		int ret;
-slow:
-		local_irq_enable();
-slow_irqon:
-		/* Try to get the remaining pages with get_user_pages */
-		start += nr << PAGE_SHIFT;
-		pages += nr;
-
-		down_read(&mm->mmap_sem);
-		ret = get_user_pages(current, mm, start,
-			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
-		up_read(&mm->mmap_sem);
-
-		/* Have to be a bit careful with return values */
-		if (nr > 0) {
-			if (ret < 0)
-				ret = nr;
-			else
-				ret += nr;
-		}
-
-		return ret;
-	}
+	/* Try to get the remaining pages with get_user_pages */
+	start += nr << PAGE_SHIFT;
+	pages += nr;
+	down_read(&mm->mmap_sem);
+	ret = get_user_pages(current, mm, start,
+			     nr_pages - nr, write, 0, pages, NULL);
+	up_read(&mm->mmap_sem);
+	/* Have to be a bit careful with return values */
+	if (nr > 0)
+		ret = (ret < 0) ? nr : ret + nr;
+	return ret;
 }
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index 4002329..6bcb045 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -101,18 +101,12 @@
 
 int s390_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
 {
-	int rc;
-
 	if (is_compat_task() || (TASK_SIZE >= (1UL << 53)))
 		return 0;
 	if (!(flags & MAP_FIXED))
 		addr = 0;
-	if ((addr + len) >= TASK_SIZE) {
-		rc = crst_table_upgrade(current->mm, 1UL << 53);
-		if (rc)
-			return rc;
-		update_mm(current->mm, current);
-	}
+	if ((addr + len) >= TASK_SIZE)
+		return crst_table_upgrade(current->mm, 1UL << 53);
 	return 0;
 }
 
@@ -132,7 +126,6 @@
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
 			return (unsigned long) rc;
-		update_mm(mm, current);
 		area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
 	}
 	return area;
@@ -155,7 +148,6 @@
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
 			return (unsigned long) rc;
-		update_mm(mm, current);
 		area = arch_get_unmapped_area_topdown(filp, addr, len,
 						      pgoff, flags);
 	}
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index 9903974..8400f49 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -9,6 +9,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 
+#if PAGE_DEFAULT_KEY
 static inline unsigned long sske_frame(unsigned long addr, unsigned char skey)
 {
 	asm volatile(".insn rrf,0xb22b0000,%[skey],%[addr],9,0"
@@ -16,7 +17,7 @@
 	return addr;
 }
 
-void storage_key_init_range(unsigned long start, unsigned long end)
+void __storage_key_init_range(unsigned long start, unsigned long end)
 {
 	unsigned long boundary, size;
 
@@ -36,6 +37,7 @@
 		start += PAGE_SIZE;
 	}
 }
+#endif
 
 static pte_t *walk_page_table(unsigned long addr)
 {
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index de8cbc3..0a2e5e0 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -48,12 +48,23 @@
 }
 
 #ifdef CONFIG_64BIT
+static void __crst_table_upgrade(void *arg)
+{
+	struct mm_struct *mm = arg;
+
+	if (current->active_mm == mm)
+		update_mm(mm, current);
+	__tlb_flush_local();
+}
+
 int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
 {
 	unsigned long *table, *pgd;
 	unsigned long entry;
+	int flush;
 
 	BUG_ON(limit > (1UL << 53));
+	flush = 0;
 repeat:
 	table = crst_table_alloc(mm);
 	if (!table)
@@ -79,12 +90,15 @@
 		mm->pgd = (pgd_t *) table;
 		mm->task_size = mm->context.asce_limit;
 		table = NULL;
+		flush = 1;
 	}
 	spin_unlock_bh(&mm->page_table_lock);
 	if (table)
 		crst_table_free(mm, table);
 	if (mm->context.asce_limit < limit)
 		goto repeat;
+	if (flush)
+		on_each_cpu(__crst_table_upgrade, mm, 0);
 	return 0;
 }
 
@@ -92,6 +106,8 @@
 {
 	pgd_t *pgd;
 
+	if (current->active_mm == mm)
+		__tlb_flush_mm(mm);
 	while (mm->context.asce_limit > limit) {
 		pgd = mm->pgd;
 		switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) {
@@ -114,6 +130,8 @@
 		mm->task_size = mm->context.asce_limit;
 		crst_table_free(mm, (unsigned long *) pgd);
 	}
+	if (current->active_mm == mm)
+		update_mm(mm, current);
 }
 #endif
 
@@ -1087,10 +1105,9 @@
 			continue;
 		/* Allocate new page table with pgstes */
 		new = page_table_alloc_pgste(mm, addr);
-		if (!new) {
-			mm->context.has_pgste = 0;
-			continue;
-		}
+		if (!new)
+			return -ENOMEM;
+
 		spin_lock(&mm->page_table_lock);
 		if (likely((unsigned long *) pmd_deref(*pmd) == table)) {
 			/* Nuke pmd entry pointing to the "short" page table */
@@ -1128,13 +1145,15 @@
 		if (pud_none_or_clear_bad(pud))
 			continue;
 		next = page_table_realloc_pmd(tlb, mm, pud, addr, next);
+		if (unlikely(IS_ERR_VALUE(next)))
+			return next;
 	} while (pud++, addr = next, addr != end);
 
 	return addr;
 }
 
-static void page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm,
-			       unsigned long addr, unsigned long end)
+static unsigned long page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm,
+					unsigned long addr, unsigned long end)
 {
 	unsigned long next;
 	pgd_t *pgd;
@@ -1145,7 +1164,11 @@
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
 		next = page_table_realloc_pud(tlb, mm, pgd, addr, next);
+		if (unlikely(IS_ERR_VALUE(next)))
+			return next;
 	} while (pgd++, addr = next, addr != end);
+
+	return 0;
 }
 
 /*
@@ -1157,10 +1180,6 @@
 	struct mm_struct *mm = tsk->mm;
 	struct mmu_gather tlb;
 
-	/* Do we have switched amode? If no, we cannot do sie */
-	if (s390_user_mode == HOME_SPACE_MODE)
-		return -EINVAL;
-
 	/* Do we have pgstes? if yes, we are done */
 	if (mm_has_pgste(tsk->mm))
 		return 0;
@@ -1169,9 +1188,9 @@
 	/* split thp mappings and disable thp for future mappings */
 	thp_split_mm(mm);
 	/* Reallocate the page tables with pgstes */
-	mm->context.has_pgste = 1;
 	tlb_gather_mmu(&tlb, mm, 0, TASK_SIZE);
-	page_table_realloc(&tlb, mm, 0, TASK_SIZE);
+	if (!page_table_realloc(&tlb, mm, 0, TASK_SIZE))
+		mm->context.has_pgste = 1;
 	tlb_finish_mmu(&tlb, 0, TASK_SIZE);
 	up_write(&mm->mmap_sem);
 	return mm->context.has_pgste ? 0 : -ENOMEM;
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index a5df511..16871da 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -12,8 +12,8 @@
 #include <linux/random.h>
 #include <linux/init.h>
 #include <asm/cacheflush.h>
-#include <asm/processor.h>
 #include <asm/facility.h>
+#include <asm/dis.h>
 
 /*
  * Conventions:
@@ -156,8 +156,8 @@
 		EMIT6(0xeb8ff058, 0x0024);
 		/* lgr %r14,%r15 */
 		EMIT4(0xb90400ef);
-		/* ahi %r15,<offset> */
-		EMIT4_IMM(0xa7fa0000, (jit->seen & SEEN_MEM) ? -112 : -80);
+		/* aghi %r15,<offset> */
+		EMIT4_IMM(0xa7fb0000, (jit->seen & SEEN_MEM) ? -112 : -80);
 		/* stg %r14,152(%r15) */
 		EMIT6(0xe3e0f098, 0x0024);
 	} else if ((jit->seen & SEEN_XREG) && (jit->seen & SEEN_LITERAL))
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index f17a834..0c9a177 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -120,26 +120,17 @@
 static int zpci_set_airq(struct zpci_dev *zdev)
 {
 	u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_REG_INT);
-	struct zpci_fib *fib;
-	int rc;
+	struct zpci_fib fib = {0};
 
-	fib = (void *) get_zeroed_page(GFP_KERNEL);
-	if (!fib)
-		return -ENOMEM;
+	fib.isc = PCI_ISC;
+	fib.sum = 1;		/* enable summary notifications */
+	fib.noi = airq_iv_end(zdev->aibv);
+	fib.aibv = (unsigned long) zdev->aibv->vector;
+	fib.aibvo = 0;		/* each zdev has its own interrupt vector */
+	fib.aisb = (unsigned long) zpci_aisb_iv->vector + (zdev->aisb/64)*8;
+	fib.aisbo = zdev->aisb & 63;
 
-	fib->isc = PCI_ISC;
-	fib->sum = 1;		/* enable summary notifications */
-	fib->noi = airq_iv_end(zdev->aibv);
-	fib->aibv = (unsigned long) zdev->aibv->vector;
-	fib->aibvo = 0;		/* each zdev has its own interrupt vector */
-	fib->aisb = (unsigned long) zpci_aisb_iv->vector + (zdev->aisb/64)*8;
-	fib->aisbo = zdev->aisb & 63;
-
-	rc = zpci_mod_fc(req, fib);
-	pr_debug("%s mpcifc returned noi: %d\n", __func__, fib->noi);
-
-	free_page((unsigned long) fib);
-	return rc;
+	return zpci_mod_fc(req, &fib);
 }
 
 struct mod_pci_args {
@@ -152,22 +143,14 @@
 static int mod_pci(struct zpci_dev *zdev, int fn, u8 dmaas, struct mod_pci_args *args)
 {
 	u64 req = ZPCI_CREATE_REQ(zdev->fh, dmaas, fn);
-	struct zpci_fib *fib;
-	int rc;
+	struct zpci_fib fib = {0};
 
-	/* The FIB must be available even if it's not used */
-	fib = (void *) get_zeroed_page(GFP_KERNEL);
-	if (!fib)
-		return -ENOMEM;
+	fib.pba = args->base;
+	fib.pal = args->limit;
+	fib.iota = args->iota;
+	fib.fmb_addr = args->fmb_addr;
 
-	fib->pba = args->base;
-	fib->pal = args->limit;
-	fib->iota = args->iota;
-	fib->fmb_addr = args->fmb_addr;
-
-	rc = zpci_mod_fc(req, fib);
-	free_page((unsigned long) fib);
-	return rc;
+	return zpci_mod_fc(req, &fib);
 }
 
 /* Modify PCI: Register I/O address translation parameters */
@@ -424,7 +407,6 @@
 	struct msi_msg msg;
 	int rc;
 
-	pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
 	if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI)
 		return -EINVAL;
 	msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
@@ -489,7 +471,6 @@
 out_si:
 	airq_iv_free_bit(zpci_aisb_iv, aisb);
 out:
-	dev_err(&pdev->dev, "register MSI failed with: %d\n", rc);
 	return rc;
 }
 
@@ -499,14 +480,10 @@
 	struct msi_desc *msi;
 	int rc;
 
-	pr_info("%s: on pdev: %p\n", __func__, pdev);
-
 	/* Disable adapter interrupts */
 	rc = zpci_clear_airq(zdev);
-	if (rc) {
-		dev_err(&pdev->dev, "deregister MSI failed with: %d\n", rc);
+	if (rc)
 		return;
-	}
 
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
@@ -625,8 +602,11 @@
 	r->name = name;
 
 	rc = request_resource(&iomem_resource, r);
-	if (rc)
-		pr_debug("request resource %pR failed\n", r);
+	if (rc) {
+		kfree(r->name);
+		kfree(r);
+		return ERR_PTR(-ENOMEM);
+	}
 	return r;
 }
 
@@ -708,6 +688,47 @@
 	zdev->pdev = NULL;
 }
 
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+static int zpci_restore(struct device *dev)
+{
+	struct zpci_dev *zdev = get_zdev(to_pci_dev(dev));
+	int ret = 0;
+
+	if (zdev->state != ZPCI_FN_STATE_ONLINE)
+		goto out;
+
+	ret = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES);
+	if (ret)
+		goto out;
+
+	zpci_map_resources(zdev);
+	zpci_register_ioat(zdev, 0, zdev->start_dma + PAGE_OFFSET,
+			   zdev->start_dma + zdev->iommu_size - 1,
+			   (u64) zdev->dma_table);
+
+out:
+	return ret;
+}
+
+static int zpci_freeze(struct device *dev)
+{
+	struct zpci_dev *zdev = get_zdev(to_pci_dev(dev));
+
+	if (zdev->state != ZPCI_FN_STATE_ONLINE)
+		return 0;
+
+	zpci_unregister_ioat(zdev, 0);
+	return clp_disable_fh(zdev);
+}
+
+struct dev_pm_ops pcibios_pm_ops = {
+	.thaw_noirq = zpci_restore,
+	.freeze_noirq = zpci_freeze,
+	.restore_noirq = zpci_restore,
+	.poweroff_noirq = zpci_freeze,
+};
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
+
 static int zpci_scan_bus(struct zpci_dev *zdev)
 {
 	struct resource *res;
@@ -781,7 +802,6 @@
 	rc = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES);
 	if (rc)
 		goto out;
-	pr_info("Enabled fh: 0x%x fid: 0x%x\n", zdev->fh, zdev->fid);
 
 	rc = zpci_dma_init_device(zdev);
 	if (rc)
@@ -901,10 +921,6 @@
 	    || !test_facility(71) || !test_facility(72))
 		return 0;
 
-	pr_info("Probing PCI hardware: PCI:%d  SID:%d  AEN:%d\n",
-		test_facility(69), test_facility(70),
-		test_facility(71));
-
 	rc = zpci_debug_init();
 	if (rc)
 		goto out;
diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c
index 475563c..8414798 100644
--- a/arch/s390/pci/pci_clp.c
+++ b/arch/s390/pci/pci_clp.c
@@ -16,6 +16,16 @@
 #include <asm/pci_debug.h>
 #include <asm/pci_clp.h>
 
+static inline void zpci_err_clp(unsigned int rsp, int rc)
+{
+	struct {
+		unsigned int rsp;
+		int rc;
+	} __packed data = {rsp, rc};
+
+	zpci_err_hex(&data, sizeof(data));
+}
+
 /*
  * Call Logical Processor
  * Retry logic is handled by the caller.
@@ -54,7 +64,6 @@
 	zdev->msi_addr = response->msia;
 	zdev->fmb_update = response->mui;
 
-	pr_debug("Supported number of MSI vectors: %u\n", response->noi);
 	switch (response->version) {
 	case 1:
 		zdev->max_bus_speed = PCIE_SPEED_5_0GT;
@@ -84,8 +93,8 @@
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK)
 		clp_store_query_pci_fngrp(zdev, &rrb->response);
 	else {
-		pr_err("Query PCI FNGRP failed with response: %x  cc: %d\n",
-			rrb->response.hdr.rsp, rc);
+		zpci_err("Q PCI FGRP:\n");
+		zpci_err_clp(rrb->response.hdr.rsp, rc);
 		rc = -EIO;
 	}
 	clp_free_block(rrb);
@@ -131,8 +140,8 @@
 		if (rrb->response.pfgid)
 			rc = clp_query_pci_fngrp(zdev, rrb->response.pfgid);
 	} else {
-		pr_err("Query PCI failed with response: %x  cc: %d\n",
-			 rrb->response.hdr.rsp, rc);
+		zpci_err("Q PCI FN:\n");
+		zpci_err_clp(rrb->response.hdr.rsp, rc);
 		rc = -EIO;
 	}
 out:
@@ -206,8 +215,8 @@
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK)
 		*fh = rrb->response.fh;
 	else {
-		zpci_dbg(0, "SPF fh:%x, cc:%d, resp:%x\n", *fh, rc,
-			 rrb->response.hdr.rsp);
+		zpci_err("Set PCI FN:\n");
+		zpci_err_clp(rrb->response.hdr.rsp, rc);
 		rc = -EIO;
 	}
 	clp_free_block(rrb);
@@ -262,8 +271,8 @@
 		/* Get PCI function handle list */
 		rc = clp_instr(rrb);
 		if (rc || rrb->response.hdr.rsp != CLP_RC_OK) {
-			pr_err("List PCI failed with response: 0x%x  cc: %d\n",
-				rrb->response.hdr.rsp, rc);
+			zpci_err("List PCI FN:\n");
+			zpci_err_clp(rrb->response.hdr.rsp, rc);
 			rc = -EIO;
 			goto out;
 		}
@@ -273,17 +282,11 @@
 
 		entries = (rrb->response.hdr.len - LIST_PCI_HDR_LEN) /
 			rrb->response.entry_size;
-		pr_info("Detected number of PCI functions: %u\n", entries);
 
-		/* Store the returned resume token as input for the next call */
 		resume_token = rrb->response.resume_token;
-
 		for (i = 0; i < entries; i++)
 			cb(&rrb->response.fh_list[i]);
 	} while (resume_token);
-
-	pr_debug("Maximum number of supported PCI functions: %u\n",
-		rrb->response.max_fn);
 out:
 	return rc;
 }
diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
index 7e5573a..9b83d08 100644
--- a/arch/s390/pci/pci_dma.c
+++ b/arch/s390/pci/pci_dma.c
@@ -145,10 +145,8 @@
 		return -EINVAL;
 
 	spin_lock_irqsave(&zdev->dma_table_lock, irq_flags);
-	if (!zdev->dma_table) {
-		dev_err(&zdev->pdev->dev, "Missing DMA table\n");
+	if (!zdev->dma_table)
 		goto no_refresh;
-	}
 
 	for (i = 0; i < nr_pages; i++) {
 		dma_update_cpu_trans(zdev, page_addr, dma_addr, flags);
@@ -280,11 +278,8 @@
 	size = nr_pages * PAGE_SIZE;
 
 	dma_addr = zdev->start_dma + iommu_page_index * PAGE_SIZE;
-	if (dma_addr + size > zdev->end_dma) {
-		dev_err(dev, "(dma_addr: 0x%16.16LX + size: 0x%16.16lx) > end_dma: 0x%16.16Lx\n",
-			 dma_addr, size, zdev->end_dma);
+	if (dma_addr + size > zdev->end_dma)
 		goto out_free;
-	}
 
 	if (direction == DMA_NONE || direction == DMA_TO_DEVICE)
 		flags |= ZPCI_TABLE_PROTECTED;
@@ -297,7 +292,8 @@
 out_free:
 	dma_free_iommu(zdev, iommu_page_index, nr_pages);
 out_err:
-	dev_err(dev, "Failed to map addr: %lx\n", pa);
+	zpci_err("map error:\n");
+	zpci_err_hex(&pa, sizeof(pa));
 	return DMA_ERROR_CODE;
 }
 
@@ -312,8 +308,10 @@
 	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	dma_addr = dma_addr & PAGE_MASK;
 	if (dma_update_trans(zdev, 0, dma_addr, npages * PAGE_SIZE,
-			     ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID))
-		dev_err(dev, "Failed to unmap addr: %Lx\n", dma_addr);
+			     ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID)) {
+		zpci_err("unmap error:\n");
+		zpci_err_hex(&dma_addr, sizeof(dma_addr));
+	}
 
 	atomic64_add(npages, (atomic64_t *) &zdev->fmb->unmapped_pages);
 	iommu_page_index = (dma_addr - zdev->start_dma) >> PAGE_SHIFT;
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index 0aecaf9..278e671 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <asm/pci_debug.h>
 
 /* Content Code Description for PCI Function Error */
 struct zpci_ccdf_err {
@@ -41,25 +42,15 @@
 	u16 pec;			/* PCI event code */
 } __packed;
 
-static void zpci_event_log_err(struct zpci_ccdf_err *ccdf)
-{
-	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
-
-	zpci_err("SEI error CCD:\n");
-	zpci_err_hex(ccdf, sizeof(*ccdf));
-	dev_err(&zdev->pdev->dev, "event code: 0x%x\n", ccdf->pec);
-}
-
 static void zpci_event_log_avail(struct zpci_ccdf_avail *ccdf)
 {
 	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
+	struct pci_dev *pdev = zdev ? zdev->pdev : NULL;
 
-	pr_err("%s%s: availability event: fh: 0x%x  fid: 0x%x  event code: 0x%x  reason:",
-		(zdev) ? dev_driver_string(&zdev->pdev->dev) : "?",
-		(zdev) ? dev_name(&zdev->pdev->dev) : "?",
-		ccdf->fh, ccdf->fid, ccdf->pec);
-	print_hex_dump(KERN_CONT, "ccdf", DUMP_PREFIX_OFFSET,
-		       16, 1, ccdf, sizeof(*ccdf), false);
+	pr_info("%s: Event 0x%x reconfigured PCI function 0x%x\n",
+		pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
+	zpci_err("avail CCDF:\n");
+	zpci_err_hex(ccdf, sizeof(*ccdf));
 
 	switch (ccdf->pec) {
 	case 0x0301:
@@ -79,14 +70,16 @@
 void zpci_event_error(void *data)
 {
 	struct zpci_ccdf_err *ccdf = data;
-	struct zpci_dev *zdev;
+	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
 
-	zpci_event_log_err(ccdf);
-	zdev = get_zdev_by_fid(ccdf->fid);
-	if (!zdev) {
-		pr_err("Error event for unknown fid: %x", ccdf->fid);
+	zpci_err("error CCDF:\n");
+	zpci_err_hex(ccdf, sizeof(*ccdf));
+
+	if (!zdev)
 		return;
-	}
+
+	pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n",
+	       pci_name(zdev->pdev), ccdf->pec, ccdf->fid);
 }
 
 void zpci_event_availability(void *data)
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 063af10..0833736 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -149,47 +149,32 @@
 	hardirq_ctx[cpu] = NULL;
 }
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
 	struct thread_info *curctx;
 	union irq_ctx *irqctx;
 	u32 *isp;
 
-	if (in_interrupt())
-		return;
+	curctx = current_thread_info();
+	irqctx = softirq_ctx[smp_processor_id()];
+	irqctx->tinfo.task = curctx->task;
+	irqctx->tinfo.previous_sp = current_stack_pointer;
 
-	local_irq_save(flags);
+	/* build the stack frame on the softirq stack */
+	isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
 
-	if (local_softirq_pending()) {
-		curctx = current_thread_info();
-		irqctx = softirq_ctx[smp_processor_id()];
-		irqctx->tinfo.task = curctx->task;
-		irqctx->tinfo.previous_sp = current_stack_pointer;
-
-		/* build the stack frame on the softirq stack */
-		isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
-
-		__asm__ __volatile__ (
-			"mov	r15, r9		\n"
-			"jsr	@%0		\n"
-			/* switch to the softirq stack */
-			" mov	%1, r15		\n"
-			/* restore the thread stack */
-			"mov	r9, r15		\n"
-			: /* no outputs */
-			: "r" (__do_softirq), "r" (isp)
-			: "memory", "r0", "r1", "r2", "r3", "r4",
-			  "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
-		);
-
-		/*
-		 * Shouldn't happen, we returned above if in_interrupt():
-		 */
-		WARN_ON_ONCE(softirq_count());
-	}
-
-	local_irq_restore(flags);
+	__asm__ __volatile__ (
+		"mov	r15, r9		\n"
+		"jsr	@%0		\n"
+		/* switch to the softirq stack */
+		" mov	%1, r15		\n"
+		/* restore the thread stack */
+		"mov	r9, r15		\n"
+		: /* no outputs */
+		: "r" (__do_softirq), "r" (isp)
+		: "memory", "r0", "r1", "r2", "r3", "r4",
+		  "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
+	);
 }
 #else
 static inline void handle_one_irq(unsigned int irq)
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index d4840ce..666193f 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -698,30 +698,19 @@
 	set_irq_regs(old_regs);
 }
 
-void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
+	void *orig_sp, *sp = softirq_stack[smp_processor_id()];
 
-	if (in_interrupt())
-		return;
+	sp += THREAD_SIZE - 192 - STACK_BIAS;
 
-	local_irq_save(flags);
-
-	if (local_softirq_pending()) {
-		void *orig_sp, *sp = softirq_stack[smp_processor_id()];
-
-		sp += THREAD_SIZE - 192 - STACK_BIAS;
-
-		__asm__ __volatile__("mov %%sp, %0\n\t"
-				     "mov %1, %%sp"
-				     : "=&r" (orig_sp)
-				     : "r" (sp));
-		__do_softirq();
-		__asm__ __volatile__("mov %0, %%sp"
-				     : : "r" (orig_sp));
-	}
-
-	local_irq_restore(flags);
+	__asm__ __volatile__("mov %%sp, %0\n\t"
+			     "mov %1, %%sp"
+			     : "=&r" (orig_sp)
+			     : "r" (sp));
+	__do_softirq();
+	__asm__ __volatile__("mov %0, %%sp"
+			     : : "r" (orig_sp));
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f67e839..5cd6eea 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -123,6 +123,7 @@
 	select COMPAT_OLD_SIGACTION if IA32_EMULATION
 	select RTC_LIB
 	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
 
 config INSTRUCTION_DECODER
 	def_bool y
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index 6e51979..3087ea9 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -35,7 +35,10 @@
 
 struct arch_uprobe {
 	u16				fixups;
-	u8				insn[MAX_UINSN_BYTES];
+	union {
+		u8			insn[MAX_UINSN_BYTES];
+		u8			ixol[MAX_UINSN_BYTES];
+	};
 #ifdef CONFIG_X86_64
 	unsigned long			rip_rela_target_address;
 #endif
@@ -49,11 +52,4 @@
 	unsigned int			saved_tf;
 };
 
-extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
-extern int  arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern int  arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
-extern int  arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
-extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
 #endif	/* _ASM_UPROBES_H */
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 9d84491..8e13293 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1276,16 +1276,16 @@
 static int __kprobes
 perf_event_nmi_handler(unsigned int cmd, struct pt_regs *regs)
 {
-	int ret;
 	u64 start_clock;
 	u64 finish_clock;
+	int ret;
 
 	if (!atomic_read(&active_events))
 		return NMI_DONE;
 
-	start_clock = local_clock();
+	start_clock = sched_clock();
 	ret = x86_pmu.handle_irq(regs);
-	finish_clock = local_clock();
+	finish_clock = sched_clock();
 
 	perf_sample_event_took(finish_clock - start_clock);
 
@@ -1989,7 +1989,7 @@
 		frame.return_address = 0;
 
 		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
-		if (bytes != sizeof(frame))
+		if (bytes != 0)
 			break;
 
 		if (!valid_user_frame(fp, sizeof(frame)))
@@ -2041,7 +2041,7 @@
 		frame.return_address = 0;
 
 		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
-		if (bytes != sizeof(frame))
+		if (bytes != 0)
 			break;
 
 		if (!valid_user_frame(fp, sizeof(frame)))
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index cc16faa..fd00bb2 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -164,6 +164,11 @@
 	struct perf_guest_switch_msr	guest_switch_msrs[X86_PMC_IDX_MAX];
 
 	/*
+	 * Intel checkpoint mask
+	 */
+	u64				intel_cp_status;
+
+	/*
 	 * manage shared (per-core, per-cpu) registers
 	 * used on Intel NHM/WSM/SNB
 	 */
@@ -440,6 +445,7 @@
 	int		lbr_nr;			   /* hardware stack size */
 	u64		lbr_sel_mask;		   /* LBR_SELECT valid bits */
 	const int	*lbr_sel_map;		   /* lbr_select mappings */
+	bool		lbr_double_abort;	   /* duplicated lbr aborts */
 
 	/*
 	 * Extra registers for events
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index f31a165..0fa4f24 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -190,9 +190,9 @@
 	EVENT_EXTRA_END
 };
 
-EVENT_ATTR_STR(mem-loads, mem_ld_nhm, "event=0x0b,umask=0x10,ldlat=3");
-EVENT_ATTR_STR(mem-loads, mem_ld_snb, "event=0xcd,umask=0x1,ldlat=3");
-EVENT_ATTR_STR(mem-stores, mem_st_snb, "event=0xcd,umask=0x2");
+EVENT_ATTR_STR(mem-loads,	mem_ld_nhm,	"event=0x0b,umask=0x10,ldlat=3");
+EVENT_ATTR_STR(mem-loads,	mem_ld_snb,	"event=0xcd,umask=0x1,ldlat=3");
+EVENT_ATTR_STR(mem-stores,	mem_st_snb,	"event=0xcd,umask=0x2");
 
 struct attribute *nhm_events_attrs[] = {
 	EVENT_PTR(mem_ld_nhm),
@@ -1184,6 +1184,11 @@
 	wrmsrl(hwc->config_base, ctrl_val);
 }
 
+static inline bool event_is_checkpointed(struct perf_event *event)
+{
+	return (event->hw.config & HSW_IN_TX_CHECKPOINTED) != 0;
+}
+
 static void intel_pmu_disable_event(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
@@ -1197,6 +1202,7 @@
 
 	cpuc->intel_ctrl_guest_mask &= ~(1ull << hwc->idx);
 	cpuc->intel_ctrl_host_mask &= ~(1ull << hwc->idx);
+	cpuc->intel_cp_status &= ~(1ull << hwc->idx);
 
 	/*
 	 * must disable before any actual event
@@ -1271,6 +1277,9 @@
 	if (event->attr.exclude_guest)
 		cpuc->intel_ctrl_host_mask |= (1ull << hwc->idx);
 
+	if (unlikely(event_is_checkpointed(event)))
+		cpuc->intel_cp_status |= (1ull << hwc->idx);
+
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
 		intel_pmu_enable_fixed(hwc);
 		return;
@@ -1289,6 +1298,17 @@
 int intel_pmu_save_and_restart(struct perf_event *event)
 {
 	x86_perf_event_update(event);
+	/*
+	 * For a checkpointed counter always reset back to 0.  This
+	 * avoids a situation where the counter overflows, aborts the
+	 * transaction and is then set back to shortly before the
+	 * overflow, and overflows and aborts again.
+	 */
+	if (unlikely(event_is_checkpointed(event))) {
+		/* No race with NMIs because the counter should not be armed */
+		wrmsrl(event->hw.event_base, 0);
+		local64_set(&event->hw.prev_count, 0);
+	}
 	return x86_perf_event_set_period(event);
 }
 
@@ -1372,6 +1392,13 @@
 		x86_pmu.drain_pebs(regs);
 	}
 
+	/*
+	 * Checkpointed counters can lead to 'spurious' PMIs because the
+	 * rollback caused by the PMI will have cleared the overflow status
+	 * bit. Therefore always force probe these counters.
+	 */
+	status |= cpuc->intel_cp_status;
+
 	for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
 		struct perf_event *event = cpuc->events[bit];
 
@@ -1837,6 +1864,20 @@
 	      event->attr.precise_ip > 0))
 		return -EOPNOTSUPP;
 
+	if (event_is_checkpointed(event)) {
+		/*
+		 * Sampling of checkpointed events can cause situations where
+		 * the CPU constantly aborts because of a overflow, which is
+		 * then checkpointed back and ignored. Forbid checkpointing
+		 * for sampling.
+		 *
+		 * But still allow a long sampling period, so that perf stat
+		 * from KVM works.
+		 */
+		if (event->attr.sample_period > 0 &&
+		    event->attr.sample_period < 0x7fffffff)
+			return -EOPNOTSUPP;
+	}
 	return 0;
 }
 
@@ -2182,10 +2223,36 @@
 	}
 }
 
-EVENT_ATTR_STR(mem-loads,      mem_ld_hsw,     "event=0xcd,umask=0x1,ldlat=3");
-EVENT_ATTR_STR(mem-stores,     mem_st_hsw,     "event=0xd0,umask=0x82")
+EVENT_ATTR_STR(mem-loads,	mem_ld_hsw,	"event=0xcd,umask=0x1,ldlat=3");
+EVENT_ATTR_STR(mem-stores,	mem_st_hsw,	"event=0xd0,umask=0x82")
+
+/* Haswell special events */
+EVENT_ATTR_STR(tx-start,	tx_start,	"event=0xc9,umask=0x1");
+EVENT_ATTR_STR(tx-commit,	tx_commit,	"event=0xc9,umask=0x2");
+EVENT_ATTR_STR(tx-abort,	tx_abort,	"event=0xc9,umask=0x4");
+EVENT_ATTR_STR(tx-capacity,	tx_capacity,	"event=0x54,umask=0x2");
+EVENT_ATTR_STR(tx-conflict,	tx_conflict,	"event=0x54,umask=0x1");
+EVENT_ATTR_STR(el-start,	el_start,	"event=0xc8,umask=0x1");
+EVENT_ATTR_STR(el-commit,	el_commit,	"event=0xc8,umask=0x2");
+EVENT_ATTR_STR(el-abort,	el_abort,	"event=0xc8,umask=0x4");
+EVENT_ATTR_STR(el-capacity,	el_capacity,	"event=0x54,umask=0x2");
+EVENT_ATTR_STR(el-conflict,	el_conflict,	"event=0x54,umask=0x1");
+EVENT_ATTR_STR(cycles-t,	cycles_t,	"event=0x3c,in_tx=1");
+EVENT_ATTR_STR(cycles-ct,	cycles_ct,	"event=0x3c,in_tx=1,in_tx_cp=1");
 
 static struct attribute *hsw_events_attrs[] = {
+	EVENT_PTR(tx_start),
+	EVENT_PTR(tx_commit),
+	EVENT_PTR(tx_abort),
+	EVENT_PTR(tx_capacity),
+	EVENT_PTR(tx_conflict),
+	EVENT_PTR(el_start),
+	EVENT_PTR(el_commit),
+	EVENT_PTR(el_abort),
+	EVENT_PTR(el_capacity),
+	EVENT_PTR(el_conflict),
+	EVENT_PTR(cycles_t),
+	EVENT_PTR(cycles_ct),
 	EVENT_PTR(mem_ld_hsw),
 	EVENT_PTR(mem_st_hsw),
 	NULL
@@ -2452,6 +2519,7 @@
 		x86_pmu.hw_config = hsw_hw_config;
 		x86_pmu.get_event_constraints = hsw_get_event_constraints;
 		x86_pmu.cpu_events = hsw_events_attrs;
+		x86_pmu.lbr_double_abort = true;
 		pr_cont("Haswell events, ");
 		break;
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index ab3ba1c..ae96cfa 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -12,6 +12,7 @@
 
 #define BTS_BUFFER_SIZE		(PAGE_SIZE << 4)
 #define PEBS_BUFFER_SIZE	PAGE_SIZE
+#define PEBS_FIXUP_SIZE		PAGE_SIZE
 
 /*
  * pebs_record_32 for p4 and core not supported
@@ -182,18 +183,32 @@
  * Same as pebs_record_nhm, with two additional fields.
  */
 struct pebs_record_hsw {
-	struct pebs_record_nhm nhm;
-	/*
-	 * Real IP of the event. In the Intel documentation this
-	 * is called eventingrip.
-	 */
-	u64 real_ip;
-	/*
-	 * TSX tuning information field: abort cycles and abort flags.
-	 */
-	u64 tsx_tuning;
+	u64 flags, ip;
+	u64 ax, bx, cx, dx;
+	u64 si, di, bp, sp;
+	u64 r8,  r9,  r10, r11;
+	u64 r12, r13, r14, r15;
+	u64 status, dla, dse, lat;
+	u64 real_ip, tsx_tuning;
 };
 
+union hsw_tsx_tuning {
+	struct {
+		u32 cycles_last_block     : 32,
+		    hle_abort		  : 1,
+		    rtm_abort		  : 1,
+		    instruction_abort     : 1,
+		    non_instruction_abort : 1,
+		    retry		  : 1,
+		    data_conflict	  : 1,
+		    capacity_writes	  : 1,
+		    capacity_reads	  : 1;
+	};
+	u64	    value;
+};
+
+#define PEBS_HSW_TSX_FLAGS	0xff00000000ULL
+
 void init_debug_store_on_cpu(int cpu)
 {
 	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
@@ -214,12 +229,14 @@
 	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
 }
 
+static DEFINE_PER_CPU(void *, insn_buffer);
+
 static int alloc_pebs_buffer(int cpu)
 {
 	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
 	int node = cpu_to_node(cpu);
 	int max, thresh = 1; /* always use a single PEBS record */
-	void *buffer;
+	void *buffer, *ibuffer;
 
 	if (!x86_pmu.pebs)
 		return 0;
@@ -228,6 +245,19 @@
 	if (unlikely(!buffer))
 		return -ENOMEM;
 
+	/*
+	 * HSW+ already provides us the eventing ip; no need to allocate this
+	 * buffer then.
+	 */
+	if (x86_pmu.intel_cap.pebs_format < 2) {
+		ibuffer = kzalloc_node(PEBS_FIXUP_SIZE, GFP_KERNEL, node);
+		if (!ibuffer) {
+			kfree(buffer);
+			return -ENOMEM;
+		}
+		per_cpu(insn_buffer, cpu) = ibuffer;
+	}
+
 	max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size;
 
 	ds->pebs_buffer_base = (u64)(unsigned long)buffer;
@@ -248,6 +278,9 @@
 	if (!ds || !x86_pmu.pebs)
 		return;
 
+	kfree(per_cpu(insn_buffer, cpu));
+	per_cpu(insn_buffer, cpu) = NULL;
+
 	kfree((void *)(unsigned long)ds->pebs_buffer_base);
 	ds->pebs_buffer_base = 0;
 }
@@ -715,6 +748,7 @@
 	unsigned long old_to, to = cpuc->lbr_entries[0].to;
 	unsigned long ip = regs->ip;
 	int is_64bit = 0;
+	void *kaddr;
 
 	/*
 	 * We don't need to fixup if the PEBS assist is fault like
@@ -738,7 +772,7 @@
 	 * unsigned math, either ip is before the start (impossible) or
 	 * the basic block is larger than 1 page (sanity)
 	 */
-	if ((ip - to) > PAGE_SIZE)
+	if ((ip - to) > PEBS_FIXUP_SIZE)
 		return 0;
 
 	/*
@@ -749,29 +783,33 @@
 		return 1;
 	}
 
+	if (!kernel_ip(ip)) {
+		int size, bytes;
+		u8 *buf = this_cpu_read(insn_buffer);
+
+		size = ip - to; /* Must fit our buffer, see above */
+		bytes = copy_from_user_nmi(buf, (void __user *)to, size);
+		if (bytes != 0)
+			return 0;
+
+		kaddr = buf;
+	} else {
+		kaddr = (void *)to;
+	}
+
 	do {
 		struct insn insn;
-		u8 buf[MAX_INSN_SIZE];
-		void *kaddr;
 
 		old_to = to;
-		if (!kernel_ip(ip)) {
-			int bytes, size = MAX_INSN_SIZE;
-
-			bytes = copy_from_user_nmi(buf, (void __user *)to, size);
-			if (bytes != size)
-				return 0;
-
-			kaddr = buf;
-		} else
-			kaddr = (void *)to;
 
 #ifdef CONFIG_X86_64
 		is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32);
 #endif
 		insn_init(&insn, kaddr, is_64bit);
 		insn_get_length(&insn);
+
 		to += insn.length;
+		kaddr += insn.length;
 	} while (to < ip);
 
 	if (to == ip) {
@@ -786,16 +824,34 @@
 	return 0;
 }
 
+static inline u64 intel_hsw_weight(struct pebs_record_hsw *pebs)
+{
+	if (pebs->tsx_tuning) {
+		union hsw_tsx_tuning tsx = { .value = pebs->tsx_tuning };
+		return tsx.cycles_last_block;
+	}
+	return 0;
+}
+
+static inline u64 intel_hsw_transaction(struct pebs_record_hsw *pebs)
+{
+	u64 txn = (pebs->tsx_tuning & PEBS_HSW_TSX_FLAGS) >> 32;
+
+	/* For RTM XABORTs also log the abort code from AX */
+	if ((txn & PERF_TXN_TRANSACTION) && (pebs->ax & 1))
+		txn |= ((pebs->ax >> 24) & 0xff) << PERF_TXN_ABORT_SHIFT;
+	return txn;
+}
+
 static void __intel_pmu_pebs_event(struct perf_event *event,
 				   struct pt_regs *iregs, void *__pebs)
 {
 	/*
-	 * We cast to pebs_record_nhm to get the load latency data
-	 * if extra_reg MSR_PEBS_LD_LAT_THRESHOLD used
+	 * We cast to the biggest pebs_record but are careful not to
+	 * unconditionally access the 'extra' entries.
 	 */
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct pebs_record_nhm *pebs = __pebs;
-	struct pebs_record_hsw *pebs_hsw = __pebs;
+	struct pebs_record_hsw *pebs = __pebs;
 	struct perf_sample_data data;
 	struct pt_regs regs;
 	u64 sample_type;
@@ -854,7 +910,7 @@
 	regs.sp = pebs->sp;
 
 	if (event->attr.precise_ip > 1 && x86_pmu.intel_cap.pebs_format >= 2) {
-		regs.ip = pebs_hsw->real_ip;
+		regs.ip = pebs->real_ip;
 		regs.flags |= PERF_EFLAGS_EXACT;
 	} else if (event->attr.precise_ip > 1 && intel_pmu_pebs_fixup_ip(&regs))
 		regs.flags |= PERF_EFLAGS_EXACT;
@@ -862,9 +918,18 @@
 		regs.flags &= ~PERF_EFLAGS_EXACT;
 
 	if ((event->attr.sample_type & PERF_SAMPLE_ADDR) &&
-		x86_pmu.intel_cap.pebs_format >= 1)
+	    x86_pmu.intel_cap.pebs_format >= 1)
 		data.addr = pebs->dla;
 
+	if (x86_pmu.intel_cap.pebs_format >= 2) {
+		/* Only set the TSX weight when no memory weight. */
+		if ((event->attr.sample_type & PERF_SAMPLE_WEIGHT) && !fll)
+			data.weight = intel_hsw_weight(pebs);
+
+		if (event->attr.sample_type & PERF_SAMPLE_TRANSACTION)
+			data.txn = intel_hsw_transaction(pebs);
+	}
+
 	if (has_branch_stack(event))
 		data.br_stack = &cpuc->lbr_stack;
 
@@ -913,17 +978,34 @@
 	__intel_pmu_pebs_event(event, iregs, at);
 }
 
-static void __intel_pmu_drain_pebs_nhm(struct pt_regs *iregs, void *at,
-					void *top)
+static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct debug_store *ds = cpuc->ds;
 	struct perf_event *event = NULL;
+	void *at, *top;
 	u64 status = 0;
 	int bit;
 
+	if (!x86_pmu.pebs_active)
+		return;
+
+	at  = (struct pebs_record_nhm *)(unsigned long)ds->pebs_buffer_base;
+	top = (struct pebs_record_nhm *)(unsigned long)ds->pebs_index;
+
 	ds->pebs_index = ds->pebs_buffer_base;
 
+	if (unlikely(at > top))
+		return;
+
+	/*
+	 * Should not happen, we program the threshold at 1 and do not
+	 * set a reset value.
+	 */
+	WARN_ONCE(top - at > x86_pmu.max_pebs_events * x86_pmu.pebs_record_size,
+		  "Unexpected number of pebs records %ld\n",
+		  (long)(top - at) / x86_pmu.pebs_record_size);
+
 	for (; at < top; at += x86_pmu.pebs_record_size) {
 		struct pebs_record_nhm *p = at;
 
@@ -951,61 +1033,6 @@
 	}
 }
 
-static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct debug_store *ds = cpuc->ds;
-	struct pebs_record_nhm *at, *top;
-	int n;
-
-	if (!x86_pmu.pebs_active)
-		return;
-
-	at  = (struct pebs_record_nhm *)(unsigned long)ds->pebs_buffer_base;
-	top = (struct pebs_record_nhm *)(unsigned long)ds->pebs_index;
-
-	ds->pebs_index = ds->pebs_buffer_base;
-
-	n = top - at;
-	if (n <= 0)
-		return;
-
-	/*
-	 * Should not happen, we program the threshold at 1 and do not
-	 * set a reset value.
-	 */
-	WARN_ONCE(n > x86_pmu.max_pebs_events,
-		  "Unexpected number of pebs records %d\n", n);
-
-	return __intel_pmu_drain_pebs_nhm(iregs, at, top);
-}
-
-static void intel_pmu_drain_pebs_hsw(struct pt_regs *iregs)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct debug_store *ds = cpuc->ds;
-	struct pebs_record_hsw *at, *top;
-	int n;
-
-	if (!x86_pmu.pebs_active)
-		return;
-
-	at  = (struct pebs_record_hsw *)(unsigned long)ds->pebs_buffer_base;
-	top = (struct pebs_record_hsw *)(unsigned long)ds->pebs_index;
-
-	n = top - at;
-	if (n <= 0)
-		return;
-	/*
-	 * Should not happen, we program the threshold at 1 and do not
-	 * set a reset value.
-	 */
-	WARN_ONCE(n > x86_pmu.max_pebs_events,
-		  "Unexpected number of pebs records %d\n", n);
-
-	return __intel_pmu_drain_pebs_nhm(iregs, at, top);
-}
-
 /*
  * BTS, PEBS probe and setup
  */
@@ -1040,7 +1067,7 @@
 		case 2:
 			pr_cont("PEBS fmt2%c, ", pebs_type);
 			x86_pmu.pebs_record_size = sizeof(struct pebs_record_hsw);
-			x86_pmu.drain_pebs = intel_pmu_drain_pebs_hsw;
+			x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm;
 			break;
 
 		default:
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
index d5be06a..d82d155 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -284,6 +284,7 @@
 	int lbr_format = x86_pmu.intel_cap.lbr_format;
 	u64 tos = intel_pmu_lbr_tos();
 	int i;
+	int out = 0;
 
 	for (i = 0; i < x86_pmu.lbr_nr; i++) {
 		unsigned long lbr_idx = (tos - i) & mask;
@@ -306,15 +307,27 @@
 		}
 		from = (u64)((((s64)from) << skip) >> skip);
 
-		cpuc->lbr_entries[i].from	= from;
-		cpuc->lbr_entries[i].to		= to;
-		cpuc->lbr_entries[i].mispred	= mis;
-		cpuc->lbr_entries[i].predicted	= pred;
-		cpuc->lbr_entries[i].in_tx	= in_tx;
-		cpuc->lbr_entries[i].abort	= abort;
-		cpuc->lbr_entries[i].reserved	= 0;
+		/*
+		 * Some CPUs report duplicated abort records,
+		 * with the second entry not having an abort bit set.
+		 * Skip them here. This loop runs backwards,
+		 * so we need to undo the previous record.
+		 * If the abort just happened outside the window
+		 * the extra entry cannot be removed.
+		 */
+		if (abort && x86_pmu.lbr_double_abort && out > 0)
+			out--;
+
+		cpuc->lbr_entries[out].from	 = from;
+		cpuc->lbr_entries[out].to	 = to;
+		cpuc->lbr_entries[out].mispred	 = mis;
+		cpuc->lbr_entries[out].predicted = pred;
+		cpuc->lbr_entries[out].in_tx	 = in_tx;
+		cpuc->lbr_entries[out].abort	 = abort;
+		cpuc->lbr_entries[out].reserved	 = 0;
+		out++;
 	}
-	cpuc->lbr_stack.nr = i;
+	cpuc->lbr_stack.nr = out;
 }
 
 void intel_pmu_lbr_read(void)
@@ -478,7 +491,7 @@
 
 		/* may fail if text not present */
 		bytes = copy_from_user_nmi(buf, (void __user *)from, size);
-		if (bytes != size)
+		if (bytes != 0)
 			return X86_BR_NONE;
 
 		addr = buf;
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
index 4118f9f..29c2487 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -997,6 +997,20 @@
 		}
 	}
 
+	if (!err) {
+		/*
+		 * For PCI bus with no UBOX device, find the next bus
+		 * that has UBOX device and use its mapping.
+		 */
+		i = -1;
+		for (bus = 255; bus >= 0; bus--) {
+			if (pcibus_to_physid[bus] >= 0)
+				i = pcibus_to_physid[bus];
+			else
+				pcibus_to_physid[bus] = i;
+		}
+	}
+
 	if (ubox_dev)
 		pci_dev_put(ubox_dev);
 
@@ -1099,6 +1113,24 @@
 	&format_attr_umask.attr,
 	&format_attr_edge.attr,
 	&format_attr_thresh8.attr,
+	&format_attr_match_rds.attr,
+	&format_attr_match_rnid30.attr,
+	&format_attr_match_rnid4.attr,
+	&format_attr_match_dnid.attr,
+	&format_attr_match_mc.attr,
+	&format_attr_match_opc.attr,
+	&format_attr_match_vnw.attr,
+	&format_attr_match0.attr,
+	&format_attr_match1.attr,
+	&format_attr_mask_rds.attr,
+	&format_attr_mask_rnid30.attr,
+	&format_attr_mask_rnid4.attr,
+	&format_attr_mask_dnid.attr,
+	&format_attr_mask_mc.attr,
+	&format_attr_mask_opc.attr,
+	&format_attr_mask_vnw.attr,
+	&format_attr_mask0.attr,
+	&format_attr_mask1.attr,
 	NULL,
 };
 
@@ -1312,17 +1344,83 @@
 	IVT_UNCORE_PCI_COMMON_INIT(),
 };
 
+/* registers in IRP boxes are not properly aligned */
+static unsigned ivt_uncore_irp_ctls[] = {0xd8, 0xdc, 0xe0, 0xe4};
+static unsigned ivt_uncore_irp_ctrs[] = {0xa0, 0xb0, 0xb8, 0xc0};
+
+static void ivt_uncore_irp_enable_event(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+
+	pci_write_config_dword(pdev, ivt_uncore_irp_ctls[hwc->idx],
+			       hwc->config | SNBEP_PMON_CTL_EN);
+}
+
+static void ivt_uncore_irp_disable_event(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+
+	pci_write_config_dword(pdev, ivt_uncore_irp_ctls[hwc->idx], hwc->config);
+}
+
+static u64 ivt_uncore_irp_read_counter(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+	u64 count = 0;
+
+	pci_read_config_dword(pdev, ivt_uncore_irp_ctrs[hwc->idx], (u32 *)&count);
+	pci_read_config_dword(pdev, ivt_uncore_irp_ctrs[hwc->idx] + 4, (u32 *)&count + 1);
+
+	return count;
+}
+
+static struct intel_uncore_ops ivt_uncore_irp_ops = {
+	.init_box	= ivt_uncore_pci_init_box,
+	.disable_box	= snbep_uncore_pci_disable_box,
+	.enable_box	= snbep_uncore_pci_enable_box,
+	.disable_event	= ivt_uncore_irp_disable_event,
+	.enable_event	= ivt_uncore_irp_enable_event,
+	.read_counter	= ivt_uncore_irp_read_counter,
+};
+
+static struct intel_uncore_type ivt_uncore_irp = {
+	.name			= "irp",
+	.num_counters		= 4,
+	.num_boxes		= 1,
+	.perf_ctr_bits		= 48,
+	.event_mask		= IVT_PMON_RAW_EVENT_MASK,
+	.box_ctl		= SNBEP_PCI_PMON_BOX_CTL,
+	.ops			= &ivt_uncore_irp_ops,
+	.format_group		= &ivt_uncore_format_group,
+};
+
+static struct intel_uncore_ops ivt_uncore_qpi_ops = {
+	.init_box	= ivt_uncore_pci_init_box,
+	.disable_box	= snbep_uncore_pci_disable_box,
+	.enable_box	= snbep_uncore_pci_enable_box,
+	.disable_event	= snbep_uncore_pci_disable_event,
+	.enable_event	= snbep_qpi_enable_event,
+	.read_counter	= snbep_uncore_pci_read_counter,
+	.hw_config	= snbep_qpi_hw_config,
+	.get_constraint	= uncore_get_constraint,
+	.put_constraint	= uncore_put_constraint,
+};
+
 static struct intel_uncore_type ivt_uncore_qpi = {
-	.name		= "qpi",
-	.num_counters   = 4,
-	.num_boxes	= 3,
-	.perf_ctr_bits	= 48,
-	.perf_ctr	= SNBEP_PCI_PMON_CTR0,
-	.event_ctl	= SNBEP_PCI_PMON_CTL0,
-	.event_mask	= IVT_QPI_PCI_PMON_RAW_EVENT_MASK,
-	.box_ctl	= SNBEP_PCI_PMON_BOX_CTL,
-	.ops		= &ivt_uncore_pci_ops,
-	.format_group	= &ivt_uncore_qpi_format_group,
+	.name			= "qpi",
+	.num_counters		= 4,
+	.num_boxes		= 3,
+	.perf_ctr_bits		= 48,
+	.perf_ctr		= SNBEP_PCI_PMON_CTR0,
+	.event_ctl		= SNBEP_PCI_PMON_CTL0,
+	.event_mask		= IVT_QPI_PCI_PMON_RAW_EVENT_MASK,
+	.box_ctl		= SNBEP_PCI_PMON_BOX_CTL,
+	.num_shared_regs	= 1,
+	.ops			= &ivt_uncore_qpi_ops,
+	.format_group		= &ivt_uncore_qpi_format_group,
 };
 
 static struct intel_uncore_type ivt_uncore_r2pcie = {
@@ -1346,6 +1444,7 @@
 enum {
 	IVT_PCI_UNCORE_HA,
 	IVT_PCI_UNCORE_IMC,
+	IVT_PCI_UNCORE_IRP,
 	IVT_PCI_UNCORE_QPI,
 	IVT_PCI_UNCORE_R2PCIE,
 	IVT_PCI_UNCORE_R3QPI,
@@ -1354,6 +1453,7 @@
 static struct intel_uncore_type *ivt_pci_uncores[] = {
 	[IVT_PCI_UNCORE_HA]	= &ivt_uncore_ha,
 	[IVT_PCI_UNCORE_IMC]	= &ivt_uncore_imc,
+	[IVT_PCI_UNCORE_IRP]	= &ivt_uncore_irp,
 	[IVT_PCI_UNCORE_QPI]	= &ivt_uncore_qpi,
 	[IVT_PCI_UNCORE_R2PCIE]	= &ivt_uncore_r2pcie,
 	[IVT_PCI_UNCORE_R3QPI]	= &ivt_uncore_r3qpi,
@@ -1401,6 +1501,10 @@
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xef1),
 		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 7),
 	},
+	{ /* IRP */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe39),
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IRP, 0),
+	},
 	{ /* QPI0 Port 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe32),
 		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_QPI, 0),
@@ -1429,6 +1533,16 @@
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe3e),
 		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_R3QPI, 2),
 	},
+	{ /* QPI Port 0 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe86),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
+						   SNBEP_PCI_QPI_PORT0_FILTER),
+	},
+	{ /* QPI Port 0 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe96),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
+						   SNBEP_PCI_QPI_PORT1_FILTER),
+	},
 	{ /* end: all zeroes */ }
 };
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 1a2cc64..603be7c 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1340,7 +1340,7 @@
 	.previous
 
 /* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(call_softirq)
+ENTRY(do_softirq_own_stack)
 	CFI_STARTPROC
 	pushq_cfi %rbp
 	CFI_REL_OFFSET rbp,0
@@ -1357,7 +1357,7 @@
 	decl PER_CPU_VAR(irq_count)
 	ret
 	CFI_ENDPROC
-END(call_softirq)
+END(do_softirq_own_stack)
 
 #ifdef CONFIG_XEN
 zeroentry xen_hypervisor_callback xen_do_hypervisor_callback
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 9a5c460..2e977b5 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -312,8 +312,7 @@
 	 */
 	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
 
-	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64,
-	   to 0x20-0x27 on i386 */
+	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
 	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
 
 	/* 8259A-1 (the master) has a slave on IR2 */
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 3fe0663..d7fcbed 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -145,35 +145,21 @@
 	       cpu, per_cpu(hardirq_ctx, cpu),  per_cpu(softirq_ctx, cpu));
 }
 
-asmlinkage void do_softirq(void)
+void do_softirq_own_stack(void)
 {
-	unsigned long flags;
 	struct thread_info *curctx;
 	union irq_ctx *irqctx;
 	u32 *isp;
 
-	if (in_interrupt())
-		return;
+	curctx = current_thread_info();
+	irqctx = __this_cpu_read(softirq_ctx);
+	irqctx->tinfo.task = curctx->task;
+	irqctx->tinfo.previous_esp = current_stack_pointer;
 
-	local_irq_save(flags);
+	/* build the stack frame on the softirq stack */
+	isp = (u32 *) ((char *)irqctx + sizeof(*irqctx));
 
-	if (local_softirq_pending()) {
-		curctx = current_thread_info();
-		irqctx = __this_cpu_read(softirq_ctx);
-		irqctx->tinfo.task = curctx->task;
-		irqctx->tinfo.previous_esp = current_stack_pointer;
-
-		/* build the stack frame on the softirq stack */
-		isp = (u32 *) ((char *)irqctx + sizeof(*irqctx));
-
-		call_on_stack(__do_softirq, isp);
-		/*
-		 * Shouldn't happen, we returned above if in_interrupt():
-		 */
-		WARN_ON_ONCE(softirq_count());
-	}
-
-	local_irq_restore(flags);
+	call_on_stack(__do_softirq, isp);
 }
 
 bool handle_irq(unsigned irq, struct pt_regs *regs)
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index d04d3ecd..4d1c746 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -87,24 +87,3 @@
 	generic_handle_irq_desc(irq, desc);
 	return true;
 }
-
-
-extern void call_softirq(void);
-
-asmlinkage void do_softirq(void)
-{
-	__u32 pending;
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-	pending = local_softirq_pending();
-	/* Switch to interrupt stack */
-	if (pending) {
-		call_softirq();
-		WARN_ON_ONCE(softirq_count());
-	}
-	local_irq_restore(flags);
-}
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index ba77ebc..6fcb49c 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -113,10 +113,10 @@
 		u64 before, delta, whole_msecs;
 		int remainder_ns, decimal_msecs, thishandled;
 
-		before = local_clock();
+		before = sched_clock();
 		thishandled = a->handler(type, regs);
 		handled += thishandled;
-		delta = local_clock() - before;
+		delta = sched_clock() - before;
 		trace_nmi_handler(a->handler, (int)delta, thishandled);
 
 		if (delta < nmi_longest_ns)
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 4f74d94..ddf9ecb 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -11,39 +11,26 @@
 #include <linux/sched.h>
 
 /*
- * best effort, GUP based copy_from_user() that is NMI-safe
+ * We rely on the nested NMI work to allow atomic faults from the NMI path; the
+ * nested NMI paths are careful to preserve CR2.
  */
 unsigned long
 copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 {
-	unsigned long offset, addr = (unsigned long)from;
-	unsigned long size, len = 0;
-	struct page *page;
-	void *map;
-	int ret;
+	unsigned long ret;
 
 	if (__range_not_ok(from, n, TASK_SIZE))
-		return len;
+		return 0;
 
-	do {
-		ret = __get_user_pages_fast(addr, 1, 0, &page);
-		if (!ret)
-			break;
+	/*
+	 * Even though this function is typically called from NMI/IRQ context
+	 * disable pagefaults so that its behaviour is consistent even when
+	 * called form other contexts.
+	 */
+	pagefault_disable();
+	ret = __copy_from_user_inatomic(to, from, n);
+	pagefault_enable();
 
-		offset = addr & (PAGE_SIZE - 1);
-		size = min(PAGE_SIZE - offset, n - len);
-
-		map = kmap_atomic(page);
-		memcpy(to, map+offset, size);
-		kunmap_atomic(map);
-		put_page(page);
-
-		len  += size;
-		to   += size;
-		addr += size;
-
-	} while (len < n);
-
-	return len;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(copy_from_user_nmi);
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 3aaeffc..7a517bb 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -51,7 +51,7 @@
 	return 0;
 }
 
-static inline int __kprobes notify_page_fault(struct pt_regs *regs)
+static inline int __kprobes kprobes_fault(struct pt_regs *regs)
 {
 	int ret = 0;
 
@@ -1048,7 +1048,7 @@
 			return;
 
 		/* kprobes don't want to hook the spurious faults: */
-		if (notify_page_fault(regs))
+		if (kprobes_fault(regs))
 			return;
 		/*
 		 * Don't take the mm semaphore here. If we fixup a prefetch
@@ -1060,8 +1060,28 @@
 	}
 
 	/* kprobes don't want to hook the spurious faults: */
-	if (unlikely(notify_page_fault(regs)))
+	if (unlikely(kprobes_fault(regs)))
 		return;
+
+	if (unlikely(error_code & PF_RSVD))
+		pgtable_bad(regs, error_code, address);
+
+	if (static_cpu_has(X86_FEATURE_SMAP)) {
+		if (unlikely(smap_violation(error_code, regs))) {
+			bad_area_nosemaphore(regs, error_code, address);
+			return;
+		}
+	}
+
+	/*
+	 * If we're in an interrupt, have no user context or are running
+	 * in an atomic region then we must not take the fault:
+	 */
+	if (unlikely(in_atomic() || !mm)) {
+		bad_area_nosemaphore(regs, error_code, address);
+		return;
+	}
+
 	/*
 	 * It's safe to allow irq's after cr2 has been saved and the
 	 * vmalloc fault has been handled.
@@ -1078,27 +1098,8 @@
 			local_irq_enable();
 	}
 
-	if (unlikely(error_code & PF_RSVD))
-		pgtable_bad(regs, error_code, address);
-
-	if (static_cpu_has(X86_FEATURE_SMAP)) {
-		if (unlikely(smap_violation(error_code, regs))) {
-			bad_area_nosemaphore(regs, error_code, address);
-			return;
-		}
-	}
-
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
-	/*
-	 * If we're in an interrupt, have no user context or are running
-	 * in an atomic region then we must not take the fault:
-	 */
-	if (unlikely(in_atomic() || !mm)) {
-		bad_area_nosemaphore(regs, error_code, address);
-		return;
-	}
-
 	if (error_code & PF_WRITE)
 		flags |= FAULT_FLAG_WRITE;
 
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index d6aa6e8..5d04be5 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -47,7 +47,7 @@
 	unsigned long bytes;
 
 	bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
-	if (bytes != sizeof(bufhead))
+	if (bytes != 0)
 		return NULL;
 
 	fp = (struct stack_frame_ia32 *) compat_ptr(bufhead[0].next_frame);
@@ -93,7 +93,7 @@
 	unsigned long bytes;
 
 	bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
-	if (bytes != sizeof(bufhead))
+	if (bytes != 0)
 		return NULL;
 
 	oprofile_add_trace(bufhead[0].return_address);
diff --git a/drivers/Kconfig b/drivers/Kconfig
index aa43b91..8f45144 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -166,4 +166,6 @@
 
 source "drivers/fmc/Kconfig"
 
+source "drivers/phy/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index ab93de8..687da89 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -8,6 +8,8 @@
 obj-y				+= irqchip/
 obj-y				+= bus/
 
+obj-$(CONFIG_GENERIC_PHY)	+= phy/
+
 # GPIO must come after pinctrl as gpios may need to mux pins etc
 obj-y				+= pinctrl/
 obj-y				+= gpio/
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 4c289ab..73f6c29 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -591,37 +591,6 @@
 	bus_put(dev->bus);
 }
 
-static int driver_add_attrs(struct bus_type *bus, struct device_driver *drv)
-{
-	int error = 0;
-	int i;
-
-	if (bus->drv_attrs) {
-		for (i = 0; bus->drv_attrs[i].attr.name; i++) {
-			error = driver_create_file(drv, &bus->drv_attrs[i]);
-			if (error)
-				goto err;
-		}
-	}
-done:
-	return error;
-err:
-	while (--i >= 0)
-		driver_remove_file(drv, &bus->drv_attrs[i]);
-	goto done;
-}
-
-static void driver_remove_attrs(struct bus_type *bus,
-				struct device_driver *drv)
-{
-	int i;
-
-	if (bus->drv_attrs) {
-		for (i = 0; bus->drv_attrs[i].attr.name; i++)
-			driver_remove_file(drv, &bus->drv_attrs[i]);
-	}
-}
-
 static int __must_check add_bind_files(struct device_driver *drv)
 {
 	int ret;
@@ -720,16 +689,12 @@
 		printk(KERN_ERR "%s: uevent attr (%s) failed\n",
 			__func__, drv->name);
 	}
-	error = driver_add_attrs(bus, drv);
+	error = driver_add_groups(drv, bus->drv_groups);
 	if (error) {
 		/* How the hell do we get out of this pickle? Give up */
-		printk(KERN_ERR "%s: driver_add_attrs(%s) failed\n",
-			__func__, drv->name);
-	}
-	error = driver_add_groups(drv, bus->drv_groups);
-	if (error)
 		printk(KERN_ERR "%s: driver_create_groups(%s) failed\n",
 			__func__, drv->name);
+	}
 
 	if (!drv->suppress_bind_attrs) {
 		error = add_bind_files(drv);
@@ -766,7 +731,6 @@
 
 	if (!drv->suppress_bind_attrs)
 		remove_bind_files(drv);
-	driver_remove_attrs(drv->bus, drv);
 	driver_remove_groups(drv, drv->bus->drv_groups);
 	driver_remove_file(drv, &driver_attr_uevent);
 	klist_remove(&drv->p->knode_bus);
@@ -846,42 +810,6 @@
 }
 #endif  /*  0  */
 
-
-/**
- * bus_add_attrs - Add default attributes for this bus.
- * @bus: Bus that has just been registered.
- */
-
-static int bus_add_attrs(struct bus_type *bus)
-{
-	int error = 0;
-	int i;
-
-	if (bus->bus_attrs) {
-		for (i = 0; bus->bus_attrs[i].attr.name; i++) {
-			error = bus_create_file(bus, &bus->bus_attrs[i]);
-			if (error)
-				goto err;
-		}
-	}
-done:
-	return error;
-err:
-	while (--i >= 0)
-		bus_remove_file(bus, &bus->bus_attrs[i]);
-	goto done;
-}
-
-static void bus_remove_attrs(struct bus_type *bus)
-{
-	int i;
-
-	if (bus->bus_attrs) {
-		for (i = 0; bus->bus_attrs[i].attr.name; i++)
-			bus_remove_file(bus, &bus->bus_attrs[i]);
-	}
-}
-
 static int bus_add_groups(struct bus_type *bus,
 			  const struct attribute_group **groups)
 {
@@ -983,9 +911,6 @@
 	if (retval)
 		goto bus_probe_files_fail;
 
-	retval = bus_add_attrs(bus);
-	if (retval)
-		goto bus_attrs_fail;
 	retval = bus_add_groups(bus, bus->bus_groups);
 	if (retval)
 		goto bus_groups_fail;
@@ -994,8 +919,6 @@
 	return 0;
 
 bus_groups_fail:
-	bus_remove_attrs(bus);
-bus_attrs_fail:
 	remove_probe_files(bus);
 bus_probe_files_fail:
 	kset_unregister(bus->p->drivers_kset);
@@ -1024,7 +947,6 @@
 	pr_debug("bus: '%s': unregistering\n", bus->name);
 	if (bus->dev_root)
 		device_unregister(bus->dev_root);
-	bus_remove_attrs(bus);
 	bus_remove_groups(bus, bus->bus_groups);
 	remove_probe_files(bus);
 	kset_unregister(bus->p->drivers_kset);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 8b7818b..f96f704 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -47,18 +47,6 @@
 	return ret;
 }
 
-static const void *class_attr_namespace(struct kobject *kobj,
-					const struct attribute *attr)
-{
-	struct class_attribute *class_attr = to_class_attr(attr);
-	struct subsys_private *cp = to_subsys_private(kobj);
-	const void *ns = NULL;
-
-	if (class_attr->namespace)
-		ns = class_attr->namespace(cp->class, class_attr);
-	return ns;
-}
-
 static void class_release(struct kobject *kobj)
 {
 	struct subsys_private *cp = to_subsys_private(kobj);
@@ -86,7 +74,6 @@
 static const struct sysfs_ops class_sysfs_ops = {
 	.show	   = class_attr_show,
 	.store	   = class_attr_store,
-	.namespace = class_attr_namespace,
 };
 
 static struct kobj_type class_ktype = {
@@ -99,21 +86,23 @@
 static struct kset *class_kset;
 
 
-int class_create_file(struct class *cls, const struct class_attribute *attr)
+int class_create_file_ns(struct class *cls, const struct class_attribute *attr,
+			 const void *ns)
 {
 	int error;
 	if (cls)
-		error = sysfs_create_file(&cls->p->subsys.kobj,
-					  &attr->attr);
+		error = sysfs_create_file_ns(&cls->p->subsys.kobj,
+					     &attr->attr, ns);
 	else
 		error = -EINVAL;
 	return error;
 }
 
-void class_remove_file(struct class *cls, const struct class_attribute *attr)
+void class_remove_file_ns(struct class *cls, const struct class_attribute *attr,
+			  const void *ns)
 {
 	if (cls)
-		sysfs_remove_file(&cls->p->subsys.kobj, &attr->attr);
+		sysfs_remove_file_ns(&cls->p->subsys.kobj, &attr->attr, ns);
 }
 
 static struct class *class_get(struct class *cls)
@@ -600,8 +589,8 @@
 	return 0;
 }
 
-EXPORT_SYMBOL_GPL(class_create_file);
-EXPORT_SYMBOL_GPL(class_remove_file);
+EXPORT_SYMBOL_GPL(class_create_file_ns);
+EXPORT_SYMBOL_GPL(class_remove_file_ns);
 EXPORT_SYMBOL_GPL(class_unregister);
 EXPORT_SYMBOL_GPL(class_destroy);
 
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 34abf4d..67b180d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -455,64 +455,6 @@
 }
 static DEVICE_ATTR_RW(online);
 
-static int device_add_attributes(struct device *dev,
-				 struct device_attribute *attrs)
-{
-	int error = 0;
-	int i;
-
-	if (attrs) {
-		for (i = 0; attrs[i].attr.name; i++) {
-			error = device_create_file(dev, &attrs[i]);
-			if (error)
-				break;
-		}
-		if (error)
-			while (--i >= 0)
-				device_remove_file(dev, &attrs[i]);
-	}
-	return error;
-}
-
-static void device_remove_attributes(struct device *dev,
-				     struct device_attribute *attrs)
-{
-	int i;
-
-	if (attrs)
-		for (i = 0; attrs[i].attr.name; i++)
-			device_remove_file(dev, &attrs[i]);
-}
-
-static int device_add_bin_attributes(struct device *dev,
-				     struct bin_attribute *attrs)
-{
-	int error = 0;
-	int i;
-
-	if (attrs) {
-		for (i = 0; attrs[i].attr.name; i++) {
-			error = device_create_bin_file(dev, &attrs[i]);
-			if (error)
-				break;
-		}
-		if (error)
-			while (--i >= 0)
-				device_remove_bin_file(dev, &attrs[i]);
-	}
-	return error;
-}
-
-static void device_remove_bin_attributes(struct device *dev,
-					 struct bin_attribute *attrs)
-{
-	int i;
-
-	if (attrs)
-		for (i = 0; attrs[i].attr.name; i++)
-			device_remove_bin_file(dev, &attrs[i]);
-}
-
 int device_add_groups(struct device *dev, const struct attribute_group **groups)
 {
 	return sysfs_create_groups(&dev->kobj, groups);
@@ -534,18 +476,12 @@
 		error = device_add_groups(dev, class->dev_groups);
 		if (error)
 			return error;
-		error = device_add_attributes(dev, class->dev_attrs);
-		if (error)
-			goto err_remove_class_groups;
-		error = device_add_bin_attributes(dev, class->dev_bin_attrs);
-		if (error)
-			goto err_remove_class_attrs;
 	}
 
 	if (type) {
 		error = device_add_groups(dev, type->groups);
 		if (error)
-			goto err_remove_class_bin_attrs;
+			goto err_remove_class_groups;
 	}
 
 	error = device_add_groups(dev, dev->groups);
@@ -563,12 +499,6 @@
  err_remove_type_groups:
 	if (type)
 		device_remove_groups(dev, type->groups);
- err_remove_class_bin_attrs:
-	if (class)
-		device_remove_bin_attributes(dev, class->dev_bin_attrs);
- err_remove_class_attrs:
-	if (class)
-		device_remove_attributes(dev, class->dev_attrs);
  err_remove_class_groups:
 	if (class)
 		device_remove_groups(dev, class->dev_groups);
@@ -587,11 +517,8 @@
 	if (type)
 		device_remove_groups(dev, type->groups);
 
-	if (class) {
-		device_remove_attributes(dev, class->dev_attrs);
-		device_remove_bin_attributes(dev, class->dev_bin_attrs);
+	if (class)
 		device_remove_groups(dev, class->dev_groups);
-	}
 }
 
 static ssize_t dev_show(struct device *dev, struct device_attribute *attr,
@@ -1881,6 +1808,7 @@
  */
 int device_rename(struct device *dev, const char *new_name)
 {
+	struct kobject *kobj = &dev->kobj;
 	char *old_device_name = NULL;
 	int error;
 
@@ -1888,8 +1816,7 @@
 	if (!dev)
 		return -EINVAL;
 
-	pr_debug("device: '%s': %s: renaming to '%s'\n", dev_name(dev),
-		 __func__, new_name);
+	dev_dbg(dev, "renaming to %s\n", new_name);
 
 	old_device_name = kstrdup(dev_name(dev), GFP_KERNEL);
 	if (!old_device_name) {
@@ -1898,13 +1825,14 @@
 	}
 
 	if (dev->class) {
-		error = sysfs_rename_link(&dev->class->p->subsys.kobj,
-			&dev->kobj, old_device_name, new_name);
+		error = sysfs_rename_link_ns(&dev->class->p->subsys.kobj,
+					     kobj, old_device_name,
+					     new_name, kobject_namespace(kobj));
 		if (error)
 			goto out;
 	}
 
-	error = kobject_rename(&dev->kobj, new_name);
+	error = kobject_rename(kobj, new_name);
 	if (error)
 		goto out;
 
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 507379e..545c4de 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -91,7 +91,8 @@
 	if (unlikely(!dr))
 		return NULL;
 
-	memset(dr, 0, tot_size);
+	memset(dr, 0, offsetof(struct devres, data));
+
 	INIT_LIST_HEAD(&dr->node.entry);
 	dr->node.release = release;
 	return dr;
@@ -110,7 +111,7 @@
 {
 	struct devres *dr;
 
-	dr = alloc_dr(release, size, gfp);
+	dr = alloc_dr(release, size, gfp | __GFP_ZERO);
 	if (unlikely(!dr))
 		return NULL;
 	set_node_dbginfo(&dr->node, name, size);
@@ -135,7 +136,7 @@
 {
 	struct devres *dr;
 
-	dr = alloc_dr(release, size, gfp);
+	dr = alloc_dr(release, size, gfp | __GFP_ZERO);
 	if (unlikely(!dr))
 		return NULL;
 	return dr->data;
@@ -745,58 +746,62 @@
 EXPORT_SYMBOL_GPL(devm_remove_action);
 
 /*
- * Managed kzalloc/kfree
+ * Managed kmalloc/kfree
  */
-static void devm_kzalloc_release(struct device *dev, void *res)
+static void devm_kmalloc_release(struct device *dev, void *res)
 {
 	/* noop */
 }
 
-static int devm_kzalloc_match(struct device *dev, void *res, void *data)
+static int devm_kmalloc_match(struct device *dev, void *res, void *data)
 {
 	return res == data;
 }
 
 /**
- * devm_kzalloc - Resource-managed kzalloc
+ * devm_kmalloc - Resource-managed kmalloc
  * @dev: Device to allocate memory for
  * @size: Allocation size
  * @gfp: Allocation gfp flags
  *
- * Managed kzalloc.  Memory allocated with this function is
+ * Managed kmalloc.  Memory allocated with this function is
  * automatically freed on driver detach.  Like all other devres
  * resources, guaranteed alignment is unsigned long long.
  *
  * RETURNS:
  * Pointer to allocated memory on success, NULL on failure.
  */
-void * devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
+void * devm_kmalloc(struct device *dev, size_t size, gfp_t gfp)
 {
 	struct devres *dr;
 
 	/* use raw alloc_dr for kmalloc caller tracing */
-	dr = alloc_dr(devm_kzalloc_release, size, gfp);
+	dr = alloc_dr(devm_kmalloc_release, size, gfp);
 	if (unlikely(!dr))
 		return NULL;
 
+	/*
+	 * This is named devm_kzalloc_release for historical reasons
+	 * The initial implementation did not support kmalloc, only kzalloc
+	 */
 	set_node_dbginfo(&dr->node, "devm_kzalloc_release", size);
 	devres_add(dev, dr->data);
 	return dr->data;
 }
-EXPORT_SYMBOL_GPL(devm_kzalloc);
+EXPORT_SYMBOL_GPL(devm_kmalloc);
 
 /**
  * devm_kfree - Resource-managed kfree
  * @dev: Device this memory belongs to
  * @p: Memory to free
  *
- * Free memory allocated with devm_kzalloc().
+ * Free memory allocated with devm_kmalloc().
  */
 void devm_kfree(struct device *dev, void *p)
 {
 	int rc;
 
-	rc = devres_destroy(dev, devm_kzalloc_release, devm_kzalloc_match, p);
+	rc = devres_destroy(dev, devm_kmalloc_release, devm_kmalloc_match, p);
 	WARN_ON(rc);
 }
 EXPORT_SYMBOL_GPL(devm_kfree);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 10a4467..eb8fb94 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -282,31 +282,35 @@
 	return st.size;
 }
 
-static bool fw_read_file_contents(struct file *file, struct firmware_buf *fw_buf)
+static int fw_read_file_contents(struct file *file, struct firmware_buf *fw_buf)
 {
 	long size;
 	char *buf;
+	int rc;
 
 	size = fw_file_size(file);
 	if (size <= 0)
-		return false;
+		return -EINVAL;
 	buf = vmalloc(size);
 	if (!buf)
-		return false;
-	if (kernel_read(file, 0, buf, size) != size) {
+		return -ENOMEM;
+	rc = kernel_read(file, 0, buf, size);
+	if (rc != size) {
+		if (rc > 0)
+			rc = -EIO;
 		vfree(buf);
-		return false;
+		return rc;
 	}
 	fw_buf->data = buf;
 	fw_buf->size = size;
-	return true;
+	return 0;
 }
 
-static bool fw_get_filesystem_firmware(struct device *device,
+static int fw_get_filesystem_firmware(struct device *device,
 				       struct firmware_buf *buf)
 {
 	int i;
-	bool success = false;
+	int rc = -ENOENT;
 	char *path = __getname();
 
 	for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
@@ -321,14 +325,17 @@
 		file = filp_open(path, O_RDONLY, 0);
 		if (IS_ERR(file))
 			continue;
-		success = fw_read_file_contents(file, buf);
+		rc = fw_read_file_contents(file, buf);
 		fput(file);
-		if (success)
+		if (rc)
+			dev_warn(device, "firmware, attempted to load %s, but failed with error %d\n",
+				path, rc);
+		else
 			break;
 	}
 	__putname(path);
 
-	if (success) {
+	if (!rc) {
 		dev_dbg(device, "firmware: direct-loading firmware %s\n",
 			buf->fw_id);
 		mutex_lock(&fw_lock);
@@ -337,7 +344,7 @@
 		mutex_unlock(&fw_lock);
 	}
 
-	return success;
+	return rc;
 }
 
 /* firmware holds the ownership of pages */
@@ -1086,9 +1093,14 @@
 		}
 	}
 
-	if (!fw_get_filesystem_firmware(device, fw->priv))
+	ret = fw_get_filesystem_firmware(device, fw->priv);
+	if (ret) {
+		dev_warn(device, "Direct firmware load failed with error %d\n",
+			 ret);
+		dev_warn(device, "Falling back to user helper\n");
 		ret = fw_load_from_user_helper(fw, name, device,
 					       uevent, nowait, timeout);
+	}
 
 	/* don't cache firmware handled without uevent */
 	if (!ret)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 4f8bef3..47051cd 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -488,6 +488,11 @@
 	if (ret && ACPI_HANDLE(_dev))
 		acpi_dev_pm_detach(_dev, true);
 
+	if (drv->prevent_deferred_probe && ret == -EPROBE_DEFER) {
+		dev_warn(_dev, "probe deferral not supported\n");
+		ret = -ENXIO;
+	}
+
 	return ret;
 }
 
@@ -553,8 +558,7 @@
 /**
  * platform_driver_probe - register driver for non-hotpluggable device
  * @drv: platform driver structure
- * @probe: the driver probe routine, probably from an __init section,
- *         must not return -EPROBE_DEFER.
+ * @probe: the driver probe routine, probably from an __init section
  *
  * Use this instead of platform_driver_register() when you know the device
  * is not hotpluggable and has already been registered, and you want to
@@ -565,8 +569,7 @@
  * into system-on-chip processors, where the controller devices have been
  * configured as part of board setup.
  *
- * This is incompatible with deferred probing so probe() must not
- * return -EPROBE_DEFER.
+ * Note that this is incompatible with deferred probing.
  *
  * Returns zero if the driver registered and bound to a device, else returns
  * a negative error code and with the driver not registered.
@@ -576,6 +579,12 @@
 {
 	int retval, code;
 
+	/*
+	 * Prevent driver from requesting probe deferral to avoid further
+	 * futile probe attempts.
+	 */
+	drv->prevent_deferred_probe = true;
+
 	/* make sure driver won't have bind/unbind attributes */
 	drv->driver.suppress_bind_attrs = true;
 
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 90ee350..e15430a 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -30,28 +30,37 @@
 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
 	return sprintf(buf, "0x%03X\n", core->id.manuf);
 }
+static DEVICE_ATTR_RO(manuf);
+
 static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
 	return sprintf(buf, "0x%03X\n", core->id.id);
 }
+static DEVICE_ATTR_RO(id);
+
 static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
 	return sprintf(buf, "0x%02X\n", core->id.rev);
 }
+static DEVICE_ATTR_RO(rev);
+
 static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
 	return sprintf(buf, "0x%X\n", core->id.class);
 }
-static struct device_attribute bcma_device_attrs[] = {
-	__ATTR_RO(manuf),
-	__ATTR_RO(id),
-	__ATTR_RO(rev),
-	__ATTR_RO(class),
-	__ATTR_NULL,
+static DEVICE_ATTR_RO(class);
+
+static struct attribute *bcma_device_attrs[] = {
+	&dev_attr_manuf.attr,
+	&dev_attr_id.attr,
+	&dev_attr_rev.attr,
+	&dev_attr_class.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(bcma_device);
 
 static struct bus_type bcma_bus_type = {
 	.name		= "bcma",
@@ -59,7 +68,7 @@
 	.probe		= bcma_device_probe,
 	.remove		= bcma_device_remove,
 	.uevent		= bcma_device_uevent,
-	.dev_attrs	= bcma_device_attrs,
+	.dev_groups	= bcma_device_groups,
 };
 
 static u16 bcma_cc_core_id(struct bcma_bus *bus)
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index e07a5fd..e67fa16 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -505,7 +505,7 @@
 config BLK_DEV_HD
 	bool "Very old hard disk (MFM/RLL/IDE) driver"
 	depends on HAVE_IDE
-	depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+	depends on !ARM || ARCH_RPC || BROKEN
 	help
 	  This is a very old hard disk driver that lacks the enhanced
 	  functionality of the newer ones.
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 2009266..bb5b90e 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -18,11 +18,21 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 
 #include <asm/cacheflush.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
 #include <asm/smp_plat.h>
 
+#define DRIVER_NAME		"CCI-400"
+#define DRIVER_NAME_PMU		DRIVER_NAME " PMU"
+#define PMU_NAME		"CCI_400"
+
 #define CCI_PORT_CTRL		0x0
 #define CCI_CTRL_STATUS		0xc
 
@@ -54,6 +64,568 @@
 static void __iomem *cci_ctrl_base;
 static unsigned long cci_ctrl_phys;
 
+#ifdef CONFIG_HW_PERF_EVENTS
+
+#define CCI_PMCR		0x0100
+#define CCI_PID2		0x0fe8
+
+#define CCI_PMCR_CEN		0x00000001
+#define CCI_PMCR_NCNT_MASK	0x0000f800
+#define CCI_PMCR_NCNT_SHIFT	11
+
+#define CCI_PID2_REV_MASK	0xf0
+#define CCI_PID2_REV_SHIFT	4
+
+/* Port ids */
+#define CCI_PORT_S0	0
+#define CCI_PORT_S1	1
+#define CCI_PORT_S2	2
+#define CCI_PORT_S3	3
+#define CCI_PORT_S4	4
+#define CCI_PORT_M0	5
+#define CCI_PORT_M1	6
+#define CCI_PORT_M2	7
+
+#define CCI_REV_R0		0
+#define CCI_REV_R1		1
+#define CCI_REV_R0_P4		4
+#define CCI_REV_R1_P2		6
+
+#define CCI_PMU_EVT_SEL		0x000
+#define CCI_PMU_CNTR		0x004
+#define CCI_PMU_CNTR_CTRL	0x008
+#define CCI_PMU_OVRFLW		0x00c
+
+#define CCI_PMU_OVRFLW_FLAG	1
+
+#define CCI_PMU_CNTR_BASE(idx)	((idx) * SZ_4K)
+
+/*
+ * Instead of an event id to monitor CCI cycles, a dedicated counter is
+ * provided. Use 0xff to represent CCI cycles and hope that no future revisions
+ * make use of this event in hardware.
+ */
+enum cci400_perf_events {
+	CCI_PMU_CYCLES = 0xff
+};
+
+#define CCI_PMU_EVENT_MASK		0xff
+#define CCI_PMU_EVENT_SOURCE(event)	((event >> 5) & 0x7)
+#define CCI_PMU_EVENT_CODE(event)	(event & 0x1f)
+
+#define CCI_PMU_MAX_HW_EVENTS 5   /* CCI PMU has 4 counters + 1 cycle counter */
+
+#define CCI_PMU_CYCLE_CNTR_IDX		0
+#define CCI_PMU_CNTR0_IDX		1
+#define CCI_PMU_CNTR_LAST(cci_pmu)	(CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
+
+/*
+ * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
+ * ports and bits 4:0 are event codes. There are different event codes
+ * associated with each port type.
+ *
+ * Additionally, the range of events associated with the port types changed
+ * between Rev0 and Rev1.
+ *
+ * The constants below define the range of valid codes for each port type for
+ * the different revisions and are used to validate the event to be monitored.
+ */
+
+#define CCI_REV_R0_SLAVE_PORT_MIN_EV	0x00
+#define CCI_REV_R0_SLAVE_PORT_MAX_EV	0x13
+#define CCI_REV_R0_MASTER_PORT_MIN_EV	0x14
+#define CCI_REV_R0_MASTER_PORT_MAX_EV	0x1a
+
+#define CCI_REV_R1_SLAVE_PORT_MIN_EV	0x00
+#define CCI_REV_R1_SLAVE_PORT_MAX_EV	0x14
+#define CCI_REV_R1_MASTER_PORT_MIN_EV	0x00
+#define CCI_REV_R1_MASTER_PORT_MAX_EV	0x11
+
+struct pmu_port_event_ranges {
+	u8 slave_min;
+	u8 slave_max;
+	u8 master_min;
+	u8 master_max;
+};
+
+static struct pmu_port_event_ranges port_event_range[] = {
+	[CCI_REV_R0] = {
+		.slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV,
+		.slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV,
+		.master_min = CCI_REV_R0_MASTER_PORT_MIN_EV,
+		.master_max = CCI_REV_R0_MASTER_PORT_MAX_EV,
+	},
+	[CCI_REV_R1] = {
+		.slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV,
+		.slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV,
+		.master_min = CCI_REV_R1_MASTER_PORT_MIN_EV,
+		.master_max = CCI_REV_R1_MASTER_PORT_MAX_EV,
+	},
+};
+
+struct cci_pmu_drv_data {
+	void __iomem *base;
+	struct arm_pmu *cci_pmu;
+	int nr_irqs;
+	int irqs[CCI_PMU_MAX_HW_EVENTS];
+	unsigned long active_irqs;
+	struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
+	unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
+	struct pmu_port_event_ranges *port_ranges;
+	struct pmu_hw_events hw_events;
+};
+static struct cci_pmu_drv_data *pmu;
+
+static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
+{
+	int i;
+
+	for (i = 0; i < nr_irqs; i++)
+		if (irq == irqs[i])
+			return true;
+
+	return false;
+}
+
+static int probe_cci_revision(void)
+{
+	int rev;
+	rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
+	rev >>= CCI_PID2_REV_SHIFT;
+
+	if (rev <= CCI_REV_R0_P4)
+		return CCI_REV_R0;
+	else if (rev <= CCI_REV_R1_P2)
+		return CCI_REV_R1;
+
+	return -ENOENT;
+}
+
+static struct pmu_port_event_ranges *port_range_by_rev(void)
+{
+	int rev = probe_cci_revision();
+
+	if (rev < 0)
+		return NULL;
+
+	return &port_event_range[rev];
+}
+
+static int pmu_is_valid_slave_event(u8 ev_code)
+{
+	return pmu->port_ranges->slave_min <= ev_code &&
+		ev_code <= pmu->port_ranges->slave_max;
+}
+
+static int pmu_is_valid_master_event(u8 ev_code)
+{
+	return pmu->port_ranges->master_min <= ev_code &&
+		ev_code <= pmu->port_ranges->master_max;
+}
+
+static int pmu_validate_hw_event(u8 hw_event)
+{
+	u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
+	u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
+
+	switch (ev_source) {
+	case CCI_PORT_S0:
+	case CCI_PORT_S1:
+	case CCI_PORT_S2:
+	case CCI_PORT_S3:
+	case CCI_PORT_S4:
+		/* Slave Interface */
+		if (pmu_is_valid_slave_event(ev_code))
+			return hw_event;
+		break;
+	case CCI_PORT_M0:
+	case CCI_PORT_M1:
+	case CCI_PORT_M2:
+		/* Master Interface */
+		if (pmu_is_valid_master_event(ev_code))
+			return hw_event;
+		break;
+	}
+
+	return -ENOENT;
+}
+
+static int pmu_is_valid_counter(struct arm_pmu *cci_pmu, int idx)
+{
+	return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
+		idx <= CCI_PMU_CNTR_LAST(cci_pmu);
+}
+
+static u32 pmu_read_register(int idx, unsigned int offset)
+{
+	return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+}
+
+static void pmu_write_register(u32 value, int idx, unsigned int offset)
+{
+	return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+}
+
+static void pmu_disable_counter(int idx)
+{
+	pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL);
+}
+
+static void pmu_enable_counter(int idx)
+{
+	pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL);
+}
+
+static void pmu_set_event(int idx, unsigned long event)
+{
+	event &= CCI_PMU_EVENT_MASK;
+	pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
+}
+
+static u32 pmu_get_max_counters(void)
+{
+	u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
+		      CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
+
+	/* add 1 for cycle counter */
+	return n_cnts + 1;
+}
+
+static struct pmu_hw_events *pmu_get_hw_events(void)
+{
+	return &pmu->hw_events;
+}
+
+static int pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_event = &event->hw;
+	unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK;
+	int idx;
+
+	if (cci_event == CCI_PMU_CYCLES) {
+		if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask))
+			return -EAGAIN;
+
+		return CCI_PMU_CYCLE_CNTR_IDX;
+	}
+
+	for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
+		if (!test_and_set_bit(idx, hw->used_mask))
+			return idx;
+
+	/* No counters available */
+	return -EAGAIN;
+}
+
+static int pmu_map_event(struct perf_event *event)
+{
+	int mapping;
+	u8 config = event->attr.config & CCI_PMU_EVENT_MASK;
+
+	if (event->attr.type < PERF_TYPE_MAX)
+		return -ENOENT;
+
+	if (config == CCI_PMU_CYCLES)
+		mapping = config;
+	else
+		mapping = pmu_validate_hw_event(config);
+
+	return mapping;
+}
+
+static int pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler)
+{
+	int i;
+	struct platform_device *pmu_device = cci_pmu->plat_device;
+
+	if (unlikely(!pmu_device))
+		return -ENODEV;
+
+	if (pmu->nr_irqs < 1) {
+		dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Register all available CCI PMU interrupts. In the interrupt handler
+	 * we iterate over the counters checking for interrupt source (the
+	 * overflowing counter) and clear it.
+	 *
+	 * This should allow handling of non-unique interrupt for the counters.
+	 */
+	for (i = 0; i < pmu->nr_irqs; i++) {
+		int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED,
+				"arm-cci-pmu", cci_pmu);
+		if (err) {
+			dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n",
+				pmu->irqs[i]);
+			return err;
+		}
+
+		set_bit(i, &pmu->active_irqs);
+	}
+
+	return 0;
+}
+
+static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long flags;
+	struct arm_pmu *cci_pmu = (struct arm_pmu *)dev;
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+	struct perf_sample_data data;
+	struct pt_regs *regs;
+	int idx, handled = IRQ_NONE;
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+	regs = get_irq_regs();
+	/*
+	 * Iterate over counters and update the corresponding perf events.
+	 * This should work regardless of whether we have per-counter overflow
+	 * interrupt or a combined overflow interrupt.
+	 */
+	for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
+		struct perf_event *event = events->events[idx];
+		struct hw_perf_event *hw_counter;
+
+		if (!event)
+			continue;
+
+		hw_counter = &event->hw;
+
+		/* Did this counter overflow? */
+		if (!pmu_read_register(idx, CCI_PMU_OVRFLW) & CCI_PMU_OVRFLW_FLAG)
+			continue;
+
+		pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
+
+		handled = IRQ_HANDLED;
+
+		armpmu_event_update(event);
+		perf_sample_data_init(&data, 0, hw_counter->last_period);
+		if (!armpmu_event_set_period(event))
+			continue;
+
+		if (perf_event_overflow(event, &data, regs))
+			cci_pmu->disable(event);
+	}
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+
+	return IRQ_RETVAL(handled);
+}
+
+static void pmu_free_irq(struct arm_pmu *cci_pmu)
+{
+	int i;
+
+	for (i = 0; i < pmu->nr_irqs; i++) {
+		if (!test_and_clear_bit(i, &pmu->active_irqs))
+			continue;
+
+		free_irq(pmu->irqs[i], cci_pmu);
+	}
+}
+
+static void pmu_enable_event(struct perf_event *event)
+{
+	unsigned long flags;
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Configure the event to count, unless you are counting cycles */
+	if (idx != CCI_PMU_CYCLE_CNTR_IDX)
+		pmu_set_event(idx, hw_counter->config_base);
+
+	pmu_enable_counter(idx);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void pmu_disable_event(struct perf_event *event)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+		return;
+	}
+
+	pmu_disable_counter(idx);
+}
+
+static void pmu_start(struct arm_pmu *cci_pmu)
+{
+	u32 val;
+	unsigned long flags;
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Enable all the PMU counters. */
+	val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
+	writel(val, cci_ctrl_base + CCI_PMCR);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void pmu_stop(struct arm_pmu *cci_pmu)
+{
+	u32 val;
+	unsigned long flags;
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Disable all the PMU counters. */
+	val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
+	writel(val, cci_ctrl_base + CCI_PMCR);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static u32 pmu_read_counter(struct perf_event *event)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+	u32 value;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+		return 0;
+	}
+	value = pmu_read_register(idx, CCI_PMU_CNTR);
+
+	return value;
+}
+
+static void pmu_write_counter(struct perf_event *event, u32 value)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+	else
+		pmu_write_register(value, idx, CCI_PMU_CNTR);
+}
+
+static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
+{
+	*cci_pmu = (struct arm_pmu){
+		.name             = PMU_NAME,
+		.max_period       = (1LLU << 32) - 1,
+		.get_hw_events    = pmu_get_hw_events,
+		.get_event_idx    = pmu_get_event_idx,
+		.map_event        = pmu_map_event,
+		.request_irq      = pmu_request_irq,
+		.handle_irq       = pmu_handle_irq,
+		.free_irq         = pmu_free_irq,
+		.enable           = pmu_enable_event,
+		.disable          = pmu_disable_event,
+		.start            = pmu_start,
+		.stop             = pmu_stop,
+		.read_counter     = pmu_read_counter,
+		.write_counter    = pmu_write_counter,
+	};
+
+	cci_pmu->plat_device = pdev;
+	cci_pmu->num_events = pmu_get_max_counters();
+
+	return armpmu_register(cci_pmu, -1);
+}
+
+static const struct of_device_id arm_cci_pmu_matches[] = {
+	{
+		.compatible = "arm,cci-400-pmu",
+	},
+	{},
+};
+
+static int cci_pmu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int i, ret, irq;
+
+	pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
+	if (!pmu)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pmu->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pmu->base))
+		return -ENOMEM;
+
+	/*
+	 * CCI PMU has 5 overflow signals - one per counter; but some may be tied
+	 * together to a common interrupt.
+	 */
+	pmu->nr_irqs = 0;
+	for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) {
+		irq = platform_get_irq(pdev, i);
+		if (irq < 0)
+			break;
+
+		if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs))
+			continue;
+
+		pmu->irqs[pmu->nr_irqs++] = irq;
+	}
+
+	/*
+	 * Ensure that the device tree has as many interrupts as the number
+	 * of counters.
+	 */
+	if (i < CCI_PMU_MAX_HW_EVENTS) {
+		dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n",
+			i, CCI_PMU_MAX_HW_EVENTS);
+		return -EINVAL;
+	}
+
+	pmu->port_ranges = port_range_by_rev();
+	if (!pmu->port_ranges) {
+		dev_warn(&pdev->dev, "CCI PMU version not supported\n");
+		return -EINVAL;
+	}
+
+	pmu->cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*(pmu->cci_pmu)), GFP_KERNEL);
+	if (!pmu->cci_pmu)
+		return -ENOMEM;
+
+	pmu->hw_events.events = pmu->events;
+	pmu->hw_events.used_mask = pmu->used_mask;
+	raw_spin_lock_init(&pmu->hw_events.pmu_lock);
+
+	ret = cci_pmu_init(pmu->cci_pmu, pdev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int cci_platform_probe(struct platform_device *pdev)
+{
+	if (!cci_probed())
+		return -ENODEV;
+
+	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
 struct cpu_port {
 	u64 mpidr;
 	u32 port;
@@ -120,7 +692,7 @@
 }
 EXPORT_SYMBOL_GPL(cci_ace_get_port);
 
-static void __init cci_ace_init_ports(void)
+static void cci_ace_init_ports(void)
 {
 	int port, cpu;
 	struct device_node *cpun;
@@ -386,7 +958,7 @@
 	{},
 };
 
-static int __init cci_probe(void)
+static int cci_probe(void)
 {
 	struct cci_nb_ports const *cci_config;
 	int ret, i, nb_ace = 0, nb_ace_lite = 0;
@@ -490,7 +1062,7 @@
 static int cci_init_status = -EAGAIN;
 static DEFINE_MUTEX(cci_probing);
 
-static int __init cci_init(void)
+static int cci_init(void)
 {
 	if (cci_init_status != -EAGAIN)
 		return cci_init_status;
@@ -502,18 +1074,55 @@
 	return cci_init_status;
 }
 
+#ifdef CONFIG_HW_PERF_EVENTS
+static struct platform_driver cci_pmu_driver = {
+	.driver = {
+		   .name = DRIVER_NAME_PMU,
+		   .of_match_table = arm_cci_pmu_matches,
+		  },
+	.probe = cci_pmu_probe,
+};
+
+static struct platform_driver cci_platform_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .of_match_table = arm_cci_matches,
+		  },
+	.probe = cci_platform_probe,
+};
+
+static int __init cci_platform_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&cci_pmu_driver);
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&cci_platform_driver);
+}
+
+#else
+
+static int __init cci_platform_init(void)
+{
+	return 0;
+}
+
+#endif
 /*
  * To sort out early init calls ordering a helper function is provided to
  * check if the CCI driver has beed initialized. Function check if the driver
  * has been initialized, if not it calls the init function that probes
  * the driver and updates the return value.
  */
-bool __init cci_probed(void)
+bool cci_probed(void)
 {
 	return cci_init() == 0;
 }
 EXPORT_SYMBOL_GPL(cci_probed);
 
 early_initcall(cci_init);
+core_initcall(cci_platform_init);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ARM CCI support");
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 448ce5e..dca5834 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -486,8 +486,7 @@
 		}
 
 		sprintf(devp->hd_name, "hpet%d", (int)(devp - hpetp->hp_dev));
-		irq_flags = devp->hd_flags & HPET_SHARED_IRQ
-						? IRQF_SHARED : IRQF_DISABLED;
+		irq_flags = devp->hd_flags & HPET_SHARED_IRQ ? IRQF_SHARED : 0;
 		if (request_irq(irq, hpet_interrupt, irq_flags,
 				devp->hd_name, (void *)devp)) {
 			printk(KERN_ERR "hpet: IRQ %d is not free\n", irq);
@@ -971,8 +970,6 @@
 		struct acpi_resource_fixed_memory32 *fixmem32;
 
 		fixmem32 = &res->data.fixed_memory32;
-		if (!fixmem32)
-			return AE_NO_MEMORY;
 
 		hdp->hd_phys_address = fixmem32->address;
 		hdp->hd_address = ioremap(fixmem32->address,
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index 190d442..2f685f6 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -193,8 +193,8 @@
 	if (misc->minor == MISC_DYNAMIC_MINOR) {
 		int i = find_first_zero_bit(misc_minors, DYNAMIC_MINORS);
 		if (i >= DYNAMIC_MINORS) {
-			mutex_unlock(&misc_mtx);
-			return -EBUSY;
+			err = -EBUSY;
+			goto out;
 		}
 		misc->minor = DYNAMIC_MINORS - i - 1;
 		set_bit(i, misc_minors);
@@ -203,8 +203,8 @@
 
 		list_for_each_entry(c, &misc_list, list) {
 			if (c->minor == misc->minor) {
-				mutex_unlock(&misc_mtx);
-				return -EBUSY;
+				err = -EBUSY;
+				goto out;
 			}
 		}
 	}
diff --git a/drivers/char/nwbutton.c b/drivers/char/nwbutton.c
index cfdfe49..1fd00dc0 100644
--- a/drivers/char/nwbutton.c
+++ b/drivers/char/nwbutton.c
@@ -220,7 +220,7 @@
 		return -EBUSY;
 	}
 
-	if (request_irq (IRQ_NETWINDER_BUTTON, button_handler, IRQF_DISABLED,
+	if (request_irq (IRQ_NETWINDER_BUTTON, button_handler, 0,
 			"nwbutton", NULL)) {
 		printk (KERN_WARNING "nwbutton: IRQ %d is not free.\n",
 				IRQ_NETWINDER_BUTTON);
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index c0cbbd4..3525996 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -227,7 +227,7 @@
 
 #ifdef RTC_IRQ
 /*
- *	A very tiny interrupt handler. It runs with IRQF_DISABLED set,
+ *	A very tiny interrupt handler. It runs with interrupts disabled,
  *	but there is possibility of conflicting with the set_rtc_mmss()
  *	call (the rtc irq and the timer irq can easily run at the same
  *	time in two different CPUs). So we need to serialize
@@ -1040,8 +1040,7 @@
 		rtc_int_handler_ptr = rtc_interrupt;
 	}
 
-	if (request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED,
-			"rtc", NULL)) {
+	if (request_irq(RTC_IRQ, rtc_int_handler_ptr, 0, "rtc", NULL)) {
 		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
 		rtc_has_irq = 0;
 		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index 5816b39..8bab592 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -108,8 +108,7 @@
 	/* hook this subchannel up to the system controller interrupt */
 	mutex_lock(&scdrv_mutex);
 	rv = request_irq(SGI_UART_VECTOR, scdrv_interrupt,
-			 IRQF_SHARED | IRQF_DISABLED,
-			 SYSCTL_BASENAME, sd);
+			 IRQF_SHARED, SYSCTL_BASENAME, sd);
 	if (rv) {
 		ia64_sn_irtr_close(sd->sd_nasid, sd->sd_subch);
 		kfree(sd);
diff --git a/drivers/char/snsc_event.c b/drivers/char/snsc_event.c
index ee15694..59bcefd 100644
--- a/drivers/char/snsc_event.c
+++ b/drivers/char/snsc_event.c
@@ -292,8 +292,7 @@
 
 	/* hook event subchannel up to the system controller interrupt */
 	rv = request_irq(SGI_UART_VECTOR, scdrv_event_interrupt,
-			 IRQF_SHARED | IRQF_DISABLED,
-			 "system controller events", event_sd);
+			 IRQF_SHARED, "system controller events", event_sd);
 	if (rv) {
 		printk(KERN_WARNING "%s: irq request failed (%d)\n",
 		       __func__, rv);
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index e95e0ab..100cd1d 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -222,7 +222,7 @@
 	/* This device is wired through the FPGA IO space of the ATCA blade
 	 * we can't share this IRQ */
 	result = request_irq(telclk_interrupt, &tlclk_interrupt,
-			     IRQF_DISABLED, "telco_clock", tlclk_interrupt);
+			     0, "telco_clock", tlclk_interrupt);
 	if (result == -EBUSY)
 		printk(KERN_ERR "tlclk: Interrupt can't be reserved.\n");
 	else
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 5224da5..f6345f9 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -721,7 +721,7 @@
 {
 	struct hwicap_drvdata *drvdata;
 
-	drvdata = (struct hwicap_drvdata *)dev_get_drvdata(dev);
+	drvdata = dev_get_drvdata(dev);
 
 	if (!drvdata)
 		return 0;
@@ -731,7 +731,6 @@
 	iounmap(drvdata->base_address);
 	release_mem_region(drvdata->mem_start, drvdata->mem_size);
 	kfree(drvdata);
-	dev_set_drvdata(dev, NULL);
 
 	mutex_lock(&icap_sem);
 	probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0;
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
index 5fb4ff5..6b950ca 100644
--- a/drivers/clk/clk-bcm2835.c
+++ b/drivers/clk/clk-bcm2835.c
@@ -20,14 +20,8 @@
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/clk/bcm2835.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 
-static const struct of_device_id clk_match[] __initconst = {
-	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
-	{ }
-};
-
 /*
  * These are fixed clocks. They're probably not all root clocks and it may
  * be possible to turn them on and off but until this is mapped out better
@@ -63,6 +57,4 @@
 	ret = clk_register_clkdev(clk, NULL, "20215000.uart");
 	if (ret)
 		pr_err("uart1_pclk alias not registered\n");
-
-	of_clk_init(clk_match);
 }
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 2e08cb0..2e7e9d9 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -20,8 +20,7 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-extern void __iomem *sregs_base;
+#include <linux/of_address.h>
 
 #define HB_PLL_LOCK_500		0x20000000
 #define HB_PLL_LOCK		0x10000000
@@ -280,6 +279,7 @@
 	const char *clk_name = node->name;
 	const char *parent_name;
 	struct clk_init_data init;
+	struct device_node *srnp;
 	int rc;
 
 	rc = of_property_read_u32(node, "reg", &reg);
@@ -290,7 +290,11 @@
 	if (WARN_ON(!hb_clk))
 		return NULL;
 
-	hb_clk->reg = sregs_base + reg;
+	/* Map system registers */
+	srnp = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+	hb_clk->reg = of_iomap(srnp, 0);
+	BUG_ON(!hb_clk->reg);
+	hb_clk->reg += reg;
 
 	of_property_read_string(node, "clock-output-names", &clk_name);
 
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 51410c2..6a934a5 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -27,6 +27,14 @@
  */
 
 #define SRC_CR			0x00U
+#define SRC_CR_T0_ENSEL		BIT(15)
+#define SRC_CR_T1_ENSEL		BIT(17)
+#define SRC_CR_T2_ENSEL		BIT(19)
+#define SRC_CR_T3_ENSEL		BIT(21)
+#define SRC_CR_T4_ENSEL		BIT(23)
+#define SRC_CR_T5_ENSEL		BIT(25)
+#define SRC_CR_T6_ENSEL		BIT(27)
+#define SRC_CR_T7_ENSEL		BIT(29)
 #define SRC_XTALCR		0x0CU
 #define SRC_XTALCR_XTALTIMEN	BIT(20)
 #define SRC_XTALCR_SXTALDIS	BIT(19)
@@ -54,6 +62,79 @@
 /* Base address of the SRC */
 static void __iomem *src_base;
 
+static int nomadik_clk_reboot_handler(struct notifier_block *this,
+				unsigned long code,
+				void *unused)
+{
+	u32 val;
+
+	/* The main chrystal need to be enabled for reboot to work */
+	val = readl(src_base + SRC_XTALCR);
+	val &= ~SRC_XTALCR_MXTALOVER;
+	val |= SRC_XTALCR_MXTALEN;
+	pr_crit("force-enabling MXTALO\n");
+	writel(val, src_base + SRC_XTALCR);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block nomadik_clk_reboot_notifier = {
+	.notifier_call = nomadik_clk_reboot_handler,
+};
+
+static const struct of_device_id nomadik_src_match[] __initconst = {
+	{ .compatible = "stericsson,nomadik-src" },
+	{ /* sentinel */ }
+};
+
+static void __init nomadik_src_init(void)
+{
+	struct device_node *np;
+	u32 val;
+
+	np = of_find_matching_node(NULL, nomadik_src_match);
+	if (!np) {
+		pr_crit("no matching node for SRC, aborting clock init\n");
+		return;
+	}
+	src_base = of_iomap(np, 0);
+	if (!src_base) {
+		pr_err("%s: must have src parent node with REGS (%s)\n",
+		       __func__, np->name);
+		return;
+	}
+
+	/* Set all timers to use the 2.4 MHz TIMCLK */
+	val = readl(src_base + SRC_CR);
+	val |= SRC_CR_T0_ENSEL;
+	val |= SRC_CR_T1_ENSEL;
+	val |= SRC_CR_T2_ENSEL;
+	val |= SRC_CR_T3_ENSEL;
+	val |= SRC_CR_T4_ENSEL;
+	val |= SRC_CR_T5_ENSEL;
+	val |= SRC_CR_T6_ENSEL;
+	val |= SRC_CR_T7_ENSEL;
+	writel(val, src_base + SRC_CR);
+
+	val = readl(src_base + SRC_XTALCR);
+	pr_info("SXTALO is %s\n",
+		(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
+	pr_info("MXTAL is %s\n",
+		(val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
+	if (of_property_read_bool(np, "disable-sxtalo")) {
+		/* The machine uses an external oscillator circuit */
+		val |= SRC_XTALCR_SXTALDIS;
+		pr_info("disabling SXTALO\n");
+	}
+	if (of_property_read_bool(np, "disable-mxtalo")) {
+		/* Disable this too: also run by external oscillator */
+		val |= SRC_XTALCR_MXTALOVER;
+		val &= ~SRC_XTALCR_MXTALEN;
+		pr_info("disabling MXTALO\n");
+	}
+	writel(val, src_base + SRC_XTALCR);
+	register_reboot_notifier(&nomadik_clk_reboot_notifier);
+}
+
 /**
  * struct clk_pll1 - Nomadik PLL1 clock
  * @hw: corresponding clock hardware entry
@@ -431,6 +512,9 @@
 	const char *parent_name;
 	u32 pll_id;
 
+	if (!src_base)
+		nomadik_src_init();
+
 	if (of_property_read_u32(np, "pll-id", &pll_id)) {
 		pr_err("%s: PLL \"%s\" missing pll-id property\n",
 			__func__, clk_name);
@@ -441,6 +525,8 @@
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
+CLK_OF_DECLARE(nomadik_pll_clk,
+	"st,nomadik-pll-clock", of_nomadik_pll_setup);
 
 static void __init of_nomadik_hclk_setup(struct device_node *np)
 {
@@ -448,6 +534,9 @@
 	const char *clk_name = np->name;
 	const char *parent_name;
 
+	if (!src_base)
+		nomadik_src_init();
+
 	parent_name = of_clk_get_parent_name(np, 0);
 	/*
 	 * The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4.
@@ -460,6 +549,8 @@
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
+CLK_OF_DECLARE(nomadik_hclk_clk,
+	"st,nomadik-hclk-clock", of_nomadik_hclk_setup);
 
 static void __init of_nomadik_src_clk_setup(struct device_node *np)
 {
@@ -468,6 +559,9 @@
 	const char *parent_name;
 	u32 clk_id;
 
+	if (!src_base)
+		nomadik_src_init();
+
 	if (of_property_read_u32(np, "clock-id", &clk_id)) {
 		pr_err("%s: SRC clock \"%s\" missing clock-id property\n",
 			__func__, clk_name);
@@ -478,89 +572,5 @@
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
-
-static const struct of_device_id nomadik_src_match[] __initconst = {
-	{ .compatible = "stericsson,nomadik-src" },
-	{ /* sentinel */ }
-};
-
-static const struct of_device_id nomadik_src_clk_match[] __initconst = {
-	{
-		.compatible = "fixed-clock",
-		.data = of_fixed_clk_setup,
-	},
-	{
-		.compatible = "fixed-factor-clock",
-		.data = of_fixed_factor_clk_setup,
-	},
-	{
-		.compatible = "st,nomadik-pll-clock",
-		.data = of_nomadik_pll_setup,
-	},
-	{
-		.compatible = "st,nomadik-hclk-clock",
-		.data = of_nomadik_hclk_setup,
-	},
-	{
-		.compatible = "st,nomadik-src-clock",
-		.data = of_nomadik_src_clk_setup,
-	},
-	{ /* sentinel */ }
-};
-
-static int nomadik_clk_reboot_handler(struct notifier_block *this,
-				unsigned long code,
-				void *unused)
-{
-	u32 val;
-
-	/* The main chrystal need to be enabled for reboot to work */
-	val = readl(src_base + SRC_XTALCR);
-	val &= ~SRC_XTALCR_MXTALOVER;
-	val |= SRC_XTALCR_MXTALEN;
-	pr_crit("force-enabling MXTALO\n");
-	writel(val, src_base + SRC_XTALCR);
-	return NOTIFY_OK;
-}
-
-static struct notifier_block nomadik_clk_reboot_notifier = {
-	.notifier_call = nomadik_clk_reboot_handler,
-};
-
-void __init nomadik_clk_init(void)
-{
-	struct device_node *np;
-	u32 val;
-
-	np = of_find_matching_node(NULL, nomadik_src_match);
-	if (!np) {
-		pr_crit("no matching node for SRC, aborting clock init\n");
-		return;
-	}
-	src_base = of_iomap(np, 0);
-	if (!src_base) {
-		pr_err("%s: must have src parent node with REGS (%s)\n",
-		       __func__, np->name);
-		return;
-	}
-	val = readl(src_base + SRC_XTALCR);
-	pr_info("SXTALO is %s\n",
-		(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
-	pr_info("MXTAL is %s\n",
-		(val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
-	if (of_property_read_bool(np, "disable-sxtalo")) {
-		/* The machine uses an external oscillator circuit */
-		val |= SRC_XTALCR_SXTALDIS;
-		pr_info("disabling SXTALO\n");
-	}
-	if (of_property_read_bool(np, "disable-mxtalo")) {
-		/* Disable this too: also run by external oscillator */
-		val |= SRC_XTALCR_MXTALOVER;
-		val &= ~SRC_XTALCR_MXTALEN;
-		pr_info("disabling MXTALO\n");
-	}
-	writel(val, src_base + SRC_XTALCR);
-	register_reboot_notifier(&nomadik_clk_reboot_notifier);
-
-	of_clk_init(nomadik_src_clk_match);
-}
+CLK_OF_DECLARE(nomadik_src_clk,
+	"st,nomadik-src-clock", of_nomadik_src_clk_setup);
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c
index 5ab95f1..6c15e33 100644
--- a/drivers/clk/clk-prima2.c
+++ b/drivers/clk/clk-prima2.c
@@ -1015,16 +1015,6 @@
 	},
 };
 
-static struct of_device_id clkc_ids[] = {
-	{ .compatible = "sirf,prima2-clkc" },
-	{},
-};
-
-static struct of_device_id rsc_ids[] = {
-	{ .compatible = "sirf,prima2-rsc" },
-	{},
-};
-
 enum prima2_clk_index {
 	/* 0    1     2      3      4      5      6       7         8      9 */
 	rtc,    osc,   pll1,  pll2,  pll3,  mem,   sys,   security, dsp,   gps,
@@ -1082,24 +1072,16 @@
 static struct clk *prima2_clks[maxclk];
 static struct clk_onecell_data clk_data;
 
-void __init sirfsoc_of_clk_init(void)
+static void __init sirfsoc_clk_init(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *rscnp;
 	int i;
 
-	np = of_find_matching_node(NULL, rsc_ids);
-	if (!np)
-		panic("unable to find compatible rsc node in dtb\n");
-
-	sirfsoc_rsc_vbase = of_iomap(np, 0);
+	rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
+	sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
 	if (!sirfsoc_rsc_vbase)
 		panic("unable to map rsc registers\n");
-
-	of_node_put(np);
-
-	np = of_find_matching_node(NULL, clkc_ids);
-	if (!np)
-		return;
+	of_node_put(rscnp);
 
 	sirfsoc_clk_vbase = of_iomap(np, 0);
 	if (!sirfsoc_clk_vbase)
@@ -1124,3 +1106,4 @@
 
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 }
+CLK_OF_DECLARE(sirfsoc_clk, "sirf,prima2-clkc", sirfsoc_clk_init);
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index 82306f5..7fd5c5e 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -15,11 +15,14 @@
 
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 
+#define LEGACY_PMC_BASE		0xD8130000
+
 /* All clocks share the same lock as none can be changed concurrently */
 static DEFINE_SPINLOCK(_lock);
 
@@ -53,6 +56,21 @@
 
 static void __iomem *pmc_base;
 
+static __init void vtwm_set_pmc_base(void)
+{
+	struct device_node *np =
+		of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+
+	if (np)
+		pmc_base = of_iomap(np, 0);
+	else
+		pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+	of_node_put(np);
+
+	if (!pmc_base)
+		pr_err("%s:of_iomap(pmc) failed\n", __func__);
+}
+
 #define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
 
 #define VT8500_PMC_BUSY_MASK		0x18
@@ -222,6 +240,9 @@
 	int rc;
 	int clk_init_flags = 0;
 
+	if (!pmc_base)
+		vtwm_set_pmc_base();
+
 	dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
 	if (WARN_ON(!dev_clk))
 		return;
@@ -636,6 +657,9 @@
 	struct clk_init_data init;
 	int rc;
 
+	if (!pmc_base)
+		vtwm_set_pmc_base();
+
 	rc = of_property_read_u32(node, "reg", &reg);
 	if (WARN_ON(rc))
 		return;
@@ -694,13 +718,3 @@
 	vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
 }
 CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);
-
-void __init vtwm_clk_init(void __iomem *base)
-{
-	if (!base)
-		return;
-
-	pmc_base = base;
-
-	of_clk_init(NULL);
-}
diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c
index fc777bd..81a202d 100644
--- a/drivers/clk/mvebu/armada-370.c
+++ b/drivers/clk/mvebu/armada-370.c
@@ -39,8 +39,8 @@
 };
 
 static const u32 a370_tclk_freqs[] __initconst = {
-	16600000,
-	20000000,
+	166000000,
+	200000000,
 };
 
 static u32 __init a370_get_tclk_freq(void __iomem *sar)
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index c396fe3..9fc9359 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -100,16 +101,16 @@
 	cpu, hbus, xbus, emi, uart,
 };
 
-int __init mx23_clocks_init(void)
+static void __init mx23_clocks_init(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *dcnp;
 	u32 i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
-	digctrl = of_iomap(np, 0);
+	dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+	digctrl = of_iomap(dcnp, 0);
 	WARN_ON(!digctrl);
+	of_node_put(dcnp);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
 	clkctrl = of_iomap(np, 0);
 	WARN_ON(!clkctrl);
 
@@ -162,7 +163,7 @@
 		if (IS_ERR(clks[i])) {
 			pr_err("i.MX23 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clks[i]));
-			return PTR_ERR(clks[i]);
+			return;
 		}
 
 	clk_data.clks = clks;
@@ -172,5 +173,5 @@
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	return 0;
 }
+CLK_OF_DECLARE(imx23_clkctrl, "fsl,imx23-clkctrl", mx23_clocks_init);
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 4faf0af..a6c3501 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -154,16 +155,16 @@
 	cpu, hbus, xbus, emi, uart,
 };
 
-int __init mx28_clocks_init(void)
+static void __init mx28_clocks_init(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *dcnp;
 	u32 i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
-	digctrl = of_iomap(np, 0);
+	dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+	digctrl = of_iomap(dcnp, 0);
 	WARN_ON(!digctrl);
+	of_node_put(dcnp);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
 	clkctrl = of_iomap(np, 0);
 	WARN_ON(!clkctrl);
 
@@ -239,7 +240,7 @@
 		if (IS_ERR(clks[i])) {
 			pr_err("i.MX28 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clks[i]));
-			return PTR_ERR(clks[i]);
+			return;
 		}
 
 	clk_data.clks = clks;
@@ -250,6 +251,5 @@
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
-
-	return 0;
 }
+CLK_OF_DECLARE(imx28_clkctrl, "fsl,imx28-clkctrl", mx28_clocks_init);
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 3413380..8eb4799 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -8,6 +8,4 @@
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
-ifdef CONFIG_COMMON_CLK
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
-endif
diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
index 5bb848c..81dd31a 100644
--- a/drivers/clk/socfpga/clk.c
+++ b/drivers/clk/socfpga/clk.c
@@ -49,7 +49,7 @@
 #define SOCFPGA_L4_SP_CLK		"l4_sp_clk"
 #define SOCFPGA_NAND_CLK		"nand_clk"
 #define SOCFPGA_NAND_X_CLK		"nand_x_clk"
-#define SOCFPGA_MMC_CLK			"mmc_clk"
+#define SOCFPGA_MMC_CLK			"sdmmc_clk"
 #define SOCFPGA_DB_CLK			"gpio_db_clk"
 
 #define div_mask(width)	((1 << (width)) - 1)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 34ee69f..9bbd035 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -16,7 +16,6 @@
 
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
-#include <linux/clk/sunxi.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 
@@ -617,11 +616,8 @@
 	}
 }
 
-void __init sunxi_init_clocks(void)
+static void __init sunxi_init_clocks(struct device_node *np)
 {
-	/* Register all the simple and basic clocks on DT */
-	of_clk_init(NULL);
-
 	/* Register factor clocks */
 	of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
 
@@ -634,3 +630,8 @@
 	/* Register gate clocks */
 	of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
 }
+CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks);
+CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks);
+CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks);
diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile
index c6a806e..521483f 100644
--- a/drivers/clk/ux500/Makefile
+++ b/drivers/clk/ux500/Makefile
@@ -8,6 +8,7 @@
 obj-y += clk-sysctrl.o
 
 # Clock definitions
+obj-y += u8500_of_clk.o
 obj-y += u8500_clk.o
 obj-y += u9540_clk.o
 obj-y += u8540_clk.o
diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
new file mode 100644
index 0000000..cdeff29
--- /dev/null
+++ b/drivers/clk/ux500/u8500_of_clk.c
@@ -0,0 +1,559 @@
+/*
+ * Clock definitions for u8500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+#include "clk.h"
+
+#define PRCC_NUM_PERIPH_CLUSTERS 6
+#define PRCC_PERIPHS_PER_CLUSTER 32
+
+static struct clk *prcmu_clk[PRCMU_NUM_CLKS];
+static struct clk *prcc_pclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
+static struct clk *prcc_kclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
+
+#define PRCC_SHOW(clk, base, bit) \
+	clk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit]
+#define PRCC_PCLK_STORE(clk, base, bit)	\
+	prcc_pclk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] = clk
+#define PRCC_KCLK_STORE(clk, base, bit)        \
+	prcc_kclk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] = clk
+
+struct clk *ux500_twocell_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct clk **clk_data = data;
+	unsigned int base, bit;
+
+	if (clkspec->args_count != 2)
+		return  ERR_PTR(-EINVAL);
+
+	base = clkspec->args[0];
+	bit = clkspec->args[1];
+
+	if (base != 1 && base != 2 && base != 3 && base != 5 && base != 6) {
+		pr_err("%s: invalid PRCC base %d\n", __func__, base);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return PRCC_SHOW(clk_data, base, bit);
+}
+
+static const struct of_device_id u8500_clk_of_match[] = {
+	{ .compatible = "stericsson,u8500-clks", },
+	{ },
+};
+
+void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		       u32 clkrst5_base, u32 clkrst6_base)
+{
+	struct prcmu_fw_version *fw_version;
+	struct device_node *np = NULL;
+	struct device_node *child = NULL;
+	const char *sgaclk_parent = NULL;
+	struct clk *clk, *rtc_clk, *twd_clk;
+
+	if (of_have_populated_dt())
+		np = of_find_matching_node(NULL, u8500_clk_of_match);
+	if (!np) {
+		pr_err("Either DT or U8500 Clock node not found\n");
+		return;
+	}
+
+	/* Clock sources */
+	clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0,
+				CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+	prcmu_clk[PRCMU_PLLSOC0] = clk;
+
+	clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1,
+				CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+	prcmu_clk[PRCMU_PLLSOC1] = clk;
+
+	clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
+				CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+	prcmu_clk[PRCMU_PLLDDR] = clk;
+
+	/* FIXME: Add sys, ulp and int clocks here. */
+
+	rtc_clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL",
+				CLK_IS_ROOT|CLK_IGNORE_UNUSED,
+				32768);
+
+	/* PRCMU clocks */
+	fw_version = prcmu_get_fw_version();
+	if (fw_version != NULL) {
+		switch (fw_version->project) {
+		case PRCMU_FW_PROJECT_U8500_C2:
+		case PRCMU_FW_PROJECT_U8520:
+		case PRCMU_FW_PROJECT_U8420:
+			sgaclk_parent = "soc0_pll";
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (sgaclk_parent)
+		clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent,
+					PRCMU_SGACLK, 0);
+	else
+		clk = clk_reg_prcmu_gate("sgclk", NULL,
+					PRCMU_SGACLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_SGACLK] = clk;
+
+	clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_UARTCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_MSP02CLK] = clk;
+
+	clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_MSP1CLK] = clk;
+
+	clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_I2CCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_SLIMCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_PER1CLK] = clk;
+
+	clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_PER2CLK] = clk;
+
+	clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_PER3CLK] = clk;
+
+	clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_PER5CLK] = clk;
+
+	clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_PER6CLK] = clk;
+
+	clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_PER7CLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0,
+				CLK_IS_ROOT|CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_LCDCLK] = clk;
+
+	clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_BMLCLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0,
+				CLK_IS_ROOT|CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_HSITXCLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0,
+				CLK_IS_ROOT|CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_HSIRXCLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0,
+				CLK_IS_ROOT|CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_HDMICLK] = clk;
+
+	clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_APEATCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK,
+				CLK_IS_ROOT);
+	prcmu_clk[PRCMU_APETRACECLK] = clk;
+
+	clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_MCDECLK] = clk;
+
+	clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK,
+				CLK_IS_ROOT);
+	prcmu_clk[PRCMU_IPI2CCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK,
+				CLK_IS_ROOT);
+	prcmu_clk[PRCMU_DSIALTCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_DMACLK] = clk;
+
+	clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_B2R2CLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0,
+				CLK_IS_ROOT|CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_TVCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_SSPCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_RNGCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_UICCCLK] = clk;
+
+	clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
+	prcmu_clk[PRCMU_TIMCLK] = clk;
+
+	clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK,
+					100000000,
+					CLK_IS_ROOT|CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_SDMMCCLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
+				PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_PLLDSI] = clk;
+
+	clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll",
+				PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_DSI0CLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll",
+				PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_DSI1CLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk",
+				PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_DSI0ESCCLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk",
+				PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_DSI1ESCCLK] = clk;
+
+	clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk",
+				PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE);
+	prcmu_clk[PRCMU_DSI2ESCCLK] = clk;
+
+	clk = clk_reg_prcmu_scalable_rate("armss", NULL,
+				PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+	prcmu_clk[PRCMU_ARMSS] = clk;
+
+	twd_clk = clk_register_fixed_factor(NULL, "smp_twd", "armss",
+				CLK_IGNORE_UNUSED, 1, 2);
+
+	/*
+	 * FIXME: Add special handled PRCMU clocks here:
+	 * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
+	 * 2. ab9540_clkout1yuv, see clkout0yuv
+	 */
+
+	/* PRCC P-clocks */
+	clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base,
+				BIT(0), 0);
+	PRCC_PCLK_STORE(clk, 1, 0);
+
+	clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base,
+				BIT(1), 0);
+	PRCC_PCLK_STORE(clk, 1, 1);
+
+	clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base,
+				BIT(2), 0);
+	PRCC_PCLK_STORE(clk, 1, 2);
+
+	clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base,
+				BIT(3), 0);
+	PRCC_PCLK_STORE(clk, 1, 3);
+
+	clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base,
+				BIT(4), 0);
+	PRCC_PCLK_STORE(clk, 1, 4);
+
+	clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base,
+				BIT(5), 0);
+	PRCC_PCLK_STORE(clk, 1, 5);
+
+	clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base,
+				BIT(6), 0);
+	PRCC_PCLK_STORE(clk, 1, 6);
+
+	clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base,
+				BIT(7), 0);
+	PRCC_PCLK_STORE(clk, 1, 7);
+
+	clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base,
+				BIT(8), 0);
+	PRCC_PCLK_STORE(clk, 1, 8);
+
+	clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base,
+				BIT(9), 0);
+	PRCC_PCLK_STORE(clk, 1, 9);
+
+	clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base,
+				BIT(10), 0);
+	PRCC_PCLK_STORE(clk, 1, 10);
+
+	clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base,
+				BIT(11), 0);
+	PRCC_PCLK_STORE(clk, 1, 11);
+
+	clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base,
+				BIT(0), 0);
+	PRCC_PCLK_STORE(clk, 2, 0);
+
+	clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base,
+				BIT(1), 0);
+	PRCC_PCLK_STORE(clk, 2, 1);
+
+	clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base,
+				BIT(2), 0);
+	PRCC_PCLK_STORE(clk, 2, 2);
+
+	clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base,
+				BIT(3), 0);
+	PRCC_PCLK_STORE(clk, 2, 3);
+
+	clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base,
+				BIT(4), 0);
+	PRCC_PCLK_STORE(clk, 2, 4);
+
+	clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base,
+				BIT(5), 0);
+	PRCC_PCLK_STORE(clk, 2, 5);
+
+	clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base,
+				BIT(6), 0);
+	PRCC_PCLK_STORE(clk, 2, 6);
+
+	clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base,
+				BIT(7), 0);
+	PRCC_PCLK_STORE(clk, 2, 7);
+
+	clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base,
+				BIT(8), 0);
+	PRCC_PCLK_STORE(clk, 2, 8);
+
+	clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base,
+				BIT(9), 0);
+	PRCC_PCLK_STORE(clk, 2, 9);
+
+	clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base,
+				BIT(10), 0);
+	PRCC_PCLK_STORE(clk, 2, 10);
+
+	clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base,
+				BIT(11), 0);
+	PRCC_PCLK_STORE(clk, 2, 11);
+
+	clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base,
+				BIT(12), 0);
+	PRCC_PCLK_STORE(clk, 2, 12);
+
+	clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base,
+				BIT(0), 0);
+	PRCC_PCLK_STORE(clk, 3, 0);
+
+	clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base,
+				BIT(1), 0);
+	PRCC_PCLK_STORE(clk, 3, 1);
+
+	clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base,
+				BIT(2), 0);
+	PRCC_PCLK_STORE(clk, 3, 2);
+
+	clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base,
+				BIT(3), 0);
+	PRCC_PCLK_STORE(clk, 3, 3);
+
+	clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base,
+				BIT(4), 0);
+	PRCC_PCLK_STORE(clk, 3, 4);
+
+	clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base,
+				BIT(5), 0);
+	PRCC_PCLK_STORE(clk, 3, 5);
+
+	clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base,
+				BIT(6), 0);
+	PRCC_PCLK_STORE(clk, 3, 6);
+
+	clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base,
+				BIT(7), 0);
+	PRCC_PCLK_STORE(clk, 3, 7);
+
+	clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base,
+				BIT(8), 0);
+	PRCC_PCLK_STORE(clk, 3, 8);
+
+	clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base,
+				BIT(0), 0);
+	PRCC_PCLK_STORE(clk, 5, 0);
+
+	clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base,
+				BIT(1), 0);
+	PRCC_PCLK_STORE(clk, 5, 1);
+
+	clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base,
+				BIT(0), 0);
+	PRCC_PCLK_STORE(clk, 6, 0);
+
+	clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base,
+				BIT(1), 0);
+	PRCC_PCLK_STORE(clk, 6, 1);
+
+	clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base,
+				BIT(2), 0);
+	PRCC_PCLK_STORE(clk, 6, 2);
+
+	clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base,
+				BIT(3), 0);
+	PRCC_PCLK_STORE(clk, 6, 3);
+
+	clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base,
+				BIT(4), 0);
+	PRCC_PCLK_STORE(clk, 6, 4);
+
+	clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base,
+				BIT(5), 0);
+	PRCC_PCLK_STORE(clk, 6, 5);
+
+	clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base,
+				BIT(6), 0);
+	PRCC_PCLK_STORE(clk, 6, 6);
+
+	clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base,
+				BIT(7), 0);
+	PRCC_PCLK_STORE(clk, 6, 7);
+
+	/* PRCC K-clocks
+	 *
+	 * FIXME: Some drivers requires PERPIH[n| to be automatically enabled
+	 * by enabling just the K-clock, even if it is not a valid parent to
+	 * the K-clock. Until drivers get fixed we might need some kind of
+	 * "parent muxed join".
+	 */
+
+	/* Periph1 */
+	clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
+			clkrst1_base, BIT(0), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 0);
+
+	clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
+			clkrst1_base, BIT(1), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 1);
+
+	clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
+			clkrst1_base, BIT(2), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 2);
+
+	clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
+			clkrst1_base, BIT(3), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 3);
+
+	clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
+			clkrst1_base, BIT(4), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 4);
+
+	clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
+			clkrst1_base, BIT(5), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 5);
+
+	clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
+			clkrst1_base, BIT(6), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 6);
+
+	clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
+			clkrst1_base, BIT(8), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 8);
+
+	clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
+			clkrst1_base, BIT(9), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 9);
+
+	clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
+			clkrst1_base, BIT(10), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 10);
+
+	/* Periph2 */
+	clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
+			clkrst2_base, BIT(0), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 0);
+
+	clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
+			clkrst2_base, BIT(2), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 2);
+
+	clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
+			clkrst2_base, BIT(3), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 3);
+
+	clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
+			clkrst2_base, BIT(4), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 4);
+
+	clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
+			clkrst2_base, BIT(5), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 5);
+
+	/* Note that rate is received from parent. */
+	clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
+			clkrst2_base, BIT(6),
+			CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+	PRCC_KCLK_STORE(clk, 2, 6);
+
+	clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
+			clkrst2_base, BIT(7),
+			CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+	PRCC_KCLK_STORE(clk, 2, 7);
+
+	/* Periph3 */
+	clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
+			clkrst3_base, BIT(1), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 1);
+
+	clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
+			clkrst3_base, BIT(2), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 2);
+
+	clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
+			clkrst3_base, BIT(3), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 3);
+
+	clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
+			clkrst3_base, BIT(4), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 4);
+
+	clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
+			clkrst3_base, BIT(5), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 5);
+
+	clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
+			clkrst3_base, BIT(6), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 6);
+
+	clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
+			clkrst3_base, BIT(7), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 7);
+
+	/* Periph6 */
+	clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
+			clkrst6_base, BIT(0), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 6, 0);
+
+	for_each_child_of_node(np, child) {
+		static struct clk_onecell_data clk_data;
+
+		if (!of_node_cmp(child->name, "prcmu-clock")) {
+			clk_data.clks = prcmu_clk;
+			clk_data.clk_num = ARRAY_SIZE(prcmu_clk);
+			of_clk_add_provider(child, of_clk_src_onecell_get, &clk_data);
+		}
+		if (!of_node_cmp(child->name, "prcc-periph-clock"))
+			of_clk_add_provider(child, ux500_twocell_get, prcc_pclk);
+
+		if (!of_node_cmp(child->name, "prcc-kernel-clock"))
+			of_clk_add_provider(child, ux500_twocell_get, prcc_kclk);
+
+		if (!of_node_cmp(child->name, "rtc32k-clock"))
+			of_clk_add_provider(child, of_clk_src_simple_get, rtc_clk);
+
+		if (!of_node_cmp(child->name, "smp-twd-clock"))
+			of_clk_add_provider(child, of_clk_src_simple_get, twd_clk);
+	}
+}
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
index f262588..20c8add 100644
--- a/drivers/clk/ux500/u8540_clk.c
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -83,7 +83,7 @@
 	clk_register_clkdev(clk, NULL, "lcd");
 	clk_register_clkdev(clk, "lcd", "mcde");
 
-	clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BML8580CLK,
+	clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK,
 				CLK_IS_ROOT);
 	clk_register_clkdev(clk, NULL, "bml");
 
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 67ccf4a..f5e4c21 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -107,7 +107,7 @@
 
 	vco = icst_hz_to_vco(icst->params, rate);
 	icst->rate = icst_hz(icst->params, vco);
-	vco_set(icst->vcoreg, icst->lockreg, vco);
+	vco_set(icst->lockreg, icst->vcoreg, vco);
 	return 0;
 }
 
diff --git a/drivers/cpufreq/integrator-cpufreq.c b/drivers/cpufreq/integrator-cpufreq.c
index f7c99df..3d79bca 100644
--- a/drivers/cpufreq/integrator-cpufreq.c
+++ b/drivers/cpufreq/integrator-cpufreq.c
@@ -15,18 +15,19 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst.h>
 
-static struct cpufreq_driver integrator_driver;
+static void __iomem *cm_base;
+/* The cpufreq driver only use the OSC register */
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
 
-#define CM_ID  	__io_address(INTEGRATOR_HDR_ID)
-#define CM_OSC	__io_address(INTEGRATOR_HDR_OSC)
-#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
-#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
+static struct cpufreq_driver integrator_driver;
 
 static const struct icst_params lclk_params = {
 	.ref		= 24000000,
@@ -100,7 +101,7 @@
 	BUG_ON(cpu != smp_processor_id());
 
 	/* get current setting */
-	cm_osc = __raw_readl(CM_OSC);
+	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
 
 	if (machine_is_integrator()) {
 		vco.s = (cm_osc >> 8) & 7;
@@ -128,7 +129,7 @@
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
-	cm_osc = __raw_readl(CM_OSC);
+	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
 
 	if (machine_is_integrator()) {
 		cm_osc &= 0xfffff800;
@@ -138,9 +139,9 @@
 	}
 	cm_osc |= vco.v;
 
-	__raw_writel(0xa05f, CM_LOCK);
-	__raw_writel(cm_osc, CM_OSC);
-	__raw_writel(0, CM_LOCK);
+	__raw_writel(0xa05f, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
+	__raw_writel(cm_osc, cm_base + INTEGRATOR_HDR_OSC_OFFSET);
+	__raw_writel(0, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
 
 	/*
 	 * Restore the CPUs allowed mask.
@@ -165,7 +166,7 @@
 	BUG_ON(cpu != smp_processor_id());
 
 	/* detect memory etc. */
-	cm_osc = __raw_readl(CM_OSC);
+	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
 
 	if (machine_is_integrator()) {
 		vco.s = (cm_osc >> 8) & 7;
@@ -202,19 +203,43 @@
 	.name		= "integrator",
 };
 
-static int __init integrator_cpu_init(void)
+static int __init integrator_cpufreq_probe(struct platform_device *pdev)
 {
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res)
+		return -ENODEV;
+
+	cm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!cm_base)
+		return -ENODEV;
+
 	return cpufreq_register_driver(&integrator_driver);
 }
 
-static void __exit integrator_cpu_exit(void)
+static void __exit integrator_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&integrator_driver);
 }
 
+static const struct of_device_id integrator_cpufreq_match[] = {
+	{ .compatible = "arm,core-module-integrator"},
+	{ },
+};
+
+static struct platform_driver integrator_cpufreq_driver = {
+	.driver = {
+		.name = "integrator-cpufreq",
+		.owner = THIS_MODULE,
+		.of_match_table = integrator_cpufreq_match,
+	},
+	.remove = __exit_p(integrator_cpufreq_remove),
+};
+
+module_platform_driver_probe(integrator_cpufreq_driver,
+			     integrator_cpufreq_probe);
+
 MODULE_AUTHOR ("Russell M. King");
 MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs");
 MODULE_LICENSE ("GPL");
-
-module_init(integrator_cpu_init);
-module_exit(integrator_cpu_exit);
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 8e36603..d6f57d5 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -4,7 +4,7 @@
 
 config ARM_HIGHBANK_CPUIDLE
 	bool "CPU Idle Driver for Calxeda processors"
-	depends on ARCH_HIGHBANK
+	depends on ARM_PSCI
 	select ARM_CPU_SUSPEND
 	help
 	  Select this to enable cpuidle on Calxeda processors.
diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c
index 3460584..3679563 100644
--- a/drivers/cpuidle/cpuidle-calxeda.c
+++ b/drivers/cpuidle/cpuidle-calxeda.c
@@ -21,53 +21,30 @@
  */
 
 #include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
 #include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <asm/cpuidle.h>
-#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
 #include <asm/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
-extern void __iomem *scu_base_addr;
-
-static noinline void calxeda_idle_restore(void)
-{
-	set_cr(get_cr() | CR_C);
-	set_auxcr(get_auxcr() | 0x40);
-	scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
-}
+#include <asm/psci.h>
 
 static int calxeda_idle_finish(unsigned long val)
 {
-	/* Already flushed cache, but do it again as the outer cache functions
-	 * dirty the cache with spinlocks */
-	flush_cache_all();
-
-	set_auxcr(get_auxcr() & ~0x40);
-	set_cr(get_cr() & ~CR_C);
-
-	scu_power_mode(scu_base_addr, SCU_PM_DORMANT);
-
-	cpu_do_idle();
-
-	/* Restore things if we didn't enter power-gating */
-	calxeda_idle_restore();
-	return 1;
+	const struct psci_power_state ps = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+	};
+	return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
 }
 
 static int calxeda_pwrdown_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
 {
-	highbank_set_cpu_jump(smp_processor_id(), cpu_resume);
+	cpu_pm_enter();
 	cpu_suspend(0, calxeda_idle_finish);
+	cpu_pm_exit();
+
 	return index;
 }
 
@@ -88,11 +65,17 @@
 	.state_count = 2,
 };
 
-static int __init calxeda_cpuidle_init(void)
+static int __init calxeda_cpuidle_probe(struct platform_device *pdev)
 {
-	if (!of_machine_is_compatible("calxeda,highbank"))
-		return -ENODEV;
-
 	return cpuidle_register(&calxeda_idle_driver, NULL);
 }
-module_init(calxeda_cpuidle_init);
+
+static struct platform_driver calxeda_cpuidle_plat_driver = {
+        .driver = {
+                .name = "cpuidle-calxeda",
+                .owner = THIS_MODULE,
+        },
+        .probe = calxeda_cpuidle_probe,
+};
+
+module_platform_driver(calxeda_cpuidle_plat_driver);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f238cfd..c61a6ec 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -154,6 +154,18 @@
 	  This DMA controller transfers data from memory to peripheral fifo
 	  or vice versa. It does not support memory to memory data transfer.
 
+config S3C24XX_DMAC
+	tristate "Samsung S3C24XX DMA support"
+	depends on ARCH_S3C24XX && !S3C24XX_DMA
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Support for the Samsung S3C24XX DMA controller driver. The
+	  DMA controller is having multiple DMA channels which can be
+	  configured for different peripherals like audio, UART, SPI.
+	  The DMA controller can transfer data from memory to peripheral,
+	  periphal to memory, periphal to periphal and memory to memory.
+
 source "drivers/dma/sh/Kconfig"
 
 config COH901318
@@ -195,7 +207,7 @@
 
 config TI_EDMA
 	bool "TI EDMA support"
-	depends on ARCH_DAVINCI || ARCH_OMAP
+	depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	select TI_PRIV_EDMA
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index db89035..0ce2da9 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -30,6 +30,7 @@
 obj-$(CONFIG_TI_EDMA) += edma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
+obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
 obj-$(CONFIG_PL330_DMA) += pl330.o
 obj-$(CONFIG_PCH_DMA) += pch_dma.o
 obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
new file mode 100644
index 0000000..4cb1279
--- /dev/null
+++ b/drivers/dma/s3c24xx-dma.c
@@ -0,0 +1,1350 @@
+/*
+ * S3C24XX DMA handling
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on amba-pl08x.c
+ *
+ * Copyright (c) 2006 ARM Ltd.
+ * Copyright (c) 2010 ST-Ericsson SA
+ *
+ * Author: Peter Pearse <peter.pearse@arm.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * The DMA controllers in S3C24XX SoCs have a varying number of DMA signals
+ * that can be routed to any of the 4 to 8 hardware-channels.
+ *
+ * Therefore on these DMA controllers the number of channels
+ * and the number of incoming DMA signals are two totally different things.
+ * It is usually not possible to theoretically handle all physical signals,
+ * so a multiplexing scheme with possible denial of use is necessary.
+ *
+ * Open items:
+ * - bursts
+ */
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_data/dma-s3c24xx.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+#define MAX_DMA_CHANNELS	8
+
+#define S3C24XX_DISRC			0x00
+#define S3C24XX_DISRCC			0x04
+#define S3C24XX_DISRCC_INC_INCREMENT	0
+#define S3C24XX_DISRCC_INC_FIXED	BIT(0)
+#define S3C24XX_DISRCC_LOC_AHB		0
+#define S3C24XX_DISRCC_LOC_APB		BIT(1)
+
+#define S3C24XX_DIDST			0x08
+#define S3C24XX_DIDSTC			0x0c
+#define S3C24XX_DIDSTC_INC_INCREMENT	0
+#define S3C24XX_DIDSTC_INC_FIXED	BIT(0)
+#define S3C24XX_DIDSTC_LOC_AHB		0
+#define S3C24XX_DIDSTC_LOC_APB		BIT(1)
+#define S3C24XX_DIDSTC_INT_TC0		0
+#define S3C24XX_DIDSTC_INT_RELOAD	BIT(2)
+
+#define S3C24XX_DCON			0x10
+
+#define S3C24XX_DCON_TC_MASK		0xfffff
+#define S3C24XX_DCON_DSZ_BYTE		(0 << 20)
+#define S3C24XX_DCON_DSZ_HALFWORD	(1 << 20)
+#define S3C24XX_DCON_DSZ_WORD		(2 << 20)
+#define S3C24XX_DCON_DSZ_MASK		(3 << 20)
+#define S3C24XX_DCON_DSZ_SHIFT		20
+#define S3C24XX_DCON_AUTORELOAD		0
+#define S3C24XX_DCON_NORELOAD		BIT(22)
+#define S3C24XX_DCON_HWTRIG		BIT(23)
+#define S3C24XX_DCON_HWSRC_SHIFT	24
+#define S3C24XX_DCON_SERV_SINGLE	0
+#define S3C24XX_DCON_SERV_WHOLE		BIT(27)
+#define S3C24XX_DCON_TSZ_UNIT		0
+#define S3C24XX_DCON_TSZ_BURST4		BIT(28)
+#define S3C24XX_DCON_INT		BIT(29)
+#define S3C24XX_DCON_SYNC_PCLK		0
+#define S3C24XX_DCON_SYNC_HCLK		BIT(30)
+#define S3C24XX_DCON_DEMAND		0
+#define S3C24XX_DCON_HANDSHAKE		BIT(31)
+
+#define S3C24XX_DSTAT			0x14
+#define S3C24XX_DSTAT_STAT_BUSY		BIT(20)
+#define S3C24XX_DSTAT_CURRTC_MASK	0xfffff
+
+#define S3C24XX_DMASKTRIG		0x20
+#define S3C24XX_DMASKTRIG_SWTRIG	BIT(0)
+#define S3C24XX_DMASKTRIG_ON		BIT(1)
+#define S3C24XX_DMASKTRIG_STOP		BIT(2)
+
+#define S3C24XX_DMAREQSEL		0x24
+#define S3C24XX_DMAREQSEL_HW		BIT(0)
+
+/*
+ * S3C2410, S3C2440 and S3C2442 SoCs cannot select any physical channel
+ * for a DMA source. Instead only specific channels are valid.
+ * All of these SoCs have 4 physical channels and the number of request
+ * source bits is 3. Additionally we also need 1 bit to mark the channel
+ * as valid.
+ * Therefore we separate the chansel element of the channel data into 4
+ * parts of 4 bits each, to hold the information if the channel is valid
+ * and the hw request source to use.
+ *
+ * Example:
+ * SDI is valid on channels 0, 2 and 3 - with varying hw request sources.
+ * For it the chansel field would look like
+ *
+ * ((BIT(3) | 1) << 3 * 4) | // channel 3, with request source 1
+ * ((BIT(3) | 2) << 2 * 4) | // channel 2, with request source 2
+ * ((BIT(3) | 2) << 0 * 4)   // channel 0, with request source 2
+ */
+#define S3C24XX_CHANSEL_WIDTH		4
+#define S3C24XX_CHANSEL_VALID		BIT(3)
+#define S3C24XX_CHANSEL_REQ_MASK	7
+
+/*
+ * struct soc_data - vendor-specific config parameters for individual SoCs
+ * @stride: spacing between the registers of each channel
+ * @has_reqsel: does the controller use the newer requestselection mechanism
+ * @has_clocks: are controllable dma-clocks present
+ */
+struct soc_data {
+	int stride;
+	bool has_reqsel;
+	bool has_clocks;
+};
+
+/*
+ * enum s3c24xx_dma_chan_state - holds the virtual channel states
+ * @S3C24XX_DMA_CHAN_IDLE: the channel is idle
+ * @S3C24XX_DMA_CHAN_RUNNING: the channel has allocated a physical transport
+ * channel and is running a transfer on it
+ * @S3C24XX_DMA_CHAN_WAITING: the channel is waiting for a physical transport
+ * channel to become available (only pertains to memcpy channels)
+ */
+enum s3c24xx_dma_chan_state {
+	S3C24XX_DMA_CHAN_IDLE,
+	S3C24XX_DMA_CHAN_RUNNING,
+	S3C24XX_DMA_CHAN_WAITING,
+};
+
+/*
+ * struct s3c24xx_sg - structure containing data per sg
+ * @src_addr: src address of sg
+ * @dst_addr: dst address of sg
+ * @len: transfer len in bytes
+ * @node: node for txd's dsg_list
+ */
+struct s3c24xx_sg {
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	size_t len;
+	struct list_head node;
+};
+
+/*
+ * struct s3c24xx_txd - wrapper for struct dma_async_tx_descriptor
+ * @vd: virtual DMA descriptor
+ * @dsg_list: list of children sg's
+ * @at: sg currently being transfered
+ * @width: transfer width
+ * @disrcc: value for source control register
+ * @didstc: value for destination control register
+ * @dcon: base value for dcon register
+ */
+struct s3c24xx_txd {
+	struct virt_dma_desc vd;
+	struct list_head dsg_list;
+	struct list_head *at;
+	u8 width;
+	u32 disrcc;
+	u32 didstc;
+	u32 dcon;
+};
+
+struct s3c24xx_dma_chan;
+
+/*
+ * struct s3c24xx_dma_phy - holder for the physical channels
+ * @id: physical index to this channel
+ * @valid: does the channel have all required elements
+ * @base: virtual memory base (remapped) for the this channel
+ * @irq: interrupt for this channel
+ * @clk: clock for this channel
+ * @lock: a lock to use when altering an instance of this struct
+ * @serving: virtual channel currently being served by this physicalchannel
+ * @host: a pointer to the host (internal use)
+ */
+struct s3c24xx_dma_phy {
+	unsigned int			id;
+	bool				valid;
+	void __iomem			*base;
+	unsigned int			irq;
+	struct clk			*clk;
+	spinlock_t			lock;
+	struct s3c24xx_dma_chan		*serving;
+	struct s3c24xx_dma_engine	*host;
+};
+
+/*
+ * struct s3c24xx_dma_chan - this structure wraps a DMA ENGINE channel
+ * @id: the id of the channel
+ * @name: name of the channel
+ * @vc: wrappped virtual channel
+ * @phy: the physical channel utilized by this channel, if there is one
+ * @runtime_addr: address for RX/TX according to the runtime config
+ * @at: active transaction on this channel
+ * @lock: a lock for this channel data
+ * @host: a pointer to the host (internal use)
+ * @state: whether the channel is idle, running etc
+ * @slave: whether this channel is a device (slave) or for memcpy
+ */
+struct s3c24xx_dma_chan {
+	int id;
+	const char *name;
+	struct virt_dma_chan vc;
+	struct s3c24xx_dma_phy *phy;
+	struct dma_slave_config cfg;
+	struct s3c24xx_txd *at;
+	struct s3c24xx_dma_engine *host;
+	enum s3c24xx_dma_chan_state state;
+	bool slave;
+};
+
+/*
+ * struct s3c24xx_dma_engine - the local state holder for the S3C24XX
+ * @pdev: the corresponding platform device
+ * @pdata: platform data passed in from the platform/machine
+ * @base: virtual memory base (remapped)
+ * @slave: slave engine for this instance
+ * @memcpy: memcpy engine for this instance
+ * @phy_chans: array of data for the physical channels
+ */
+struct s3c24xx_dma_engine {
+	struct platform_device			*pdev;
+	const struct s3c24xx_dma_platdata	*pdata;
+	struct soc_data				*sdata;
+	void __iomem				*base;
+	struct dma_device			slave;
+	struct dma_device			memcpy;
+	struct s3c24xx_dma_phy			*phy_chans;
+};
+
+/*
+ * Physical channel handling
+ */
+
+/*
+ * Check whether a certain channel is busy or not.
+ */
+static int s3c24xx_dma_phy_busy(struct s3c24xx_dma_phy *phy)
+{
+	unsigned int val = readl(phy->base + S3C24XX_DSTAT);
+	return val & S3C24XX_DSTAT_STAT_BUSY;
+}
+
+static bool s3c24xx_dma_phy_valid(struct s3c24xx_dma_chan *s3cchan,
+				  struct s3c24xx_dma_phy *phy)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	int phyvalid;
+
+	/* every phy is valid for memcopy channels */
+	if (!s3cchan->slave)
+		return true;
+
+	/* On newer variants all phys can be used for all virtual channels */
+	if (s3cdma->sdata->has_reqsel)
+		return true;
+
+	phyvalid = (cdata->chansel >> (phy->id * S3C24XX_CHANSEL_WIDTH));
+	return (phyvalid & S3C24XX_CHANSEL_VALID) ? true : false;
+}
+
+/*
+ * Allocate a physical channel for a virtual channel
+ *
+ * Try to locate a physical channel to be used for this transfer. If all
+ * are taken return NULL and the requester will have to cope by using
+ * some fallback PIO mode or retrying later.
+ */
+static
+struct s3c24xx_dma_phy *s3c24xx_dma_get_phy(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata;
+	struct s3c24xx_dma_phy *phy = NULL;
+	unsigned long flags;
+	int i;
+	int ret;
+
+	if (s3cchan->slave)
+		cdata = &pdata->channels[s3cchan->id];
+
+	for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) {
+		phy = &s3cdma->phy_chans[i];
+
+		if (!phy->valid)
+			continue;
+
+		if (!s3c24xx_dma_phy_valid(s3cchan, phy))
+			continue;
+
+		spin_lock_irqsave(&phy->lock, flags);
+
+		if (!phy->serving) {
+			phy->serving = s3cchan;
+			spin_unlock_irqrestore(&phy->lock, flags);
+			break;
+		}
+
+		spin_unlock_irqrestore(&phy->lock, flags);
+	}
+
+	/* No physical channel available, cope with it */
+	if (i == s3cdma->pdata->num_phy_channels) {
+		dev_warn(&s3cdma->pdev->dev, "no phy channel available\n");
+		return NULL;
+	}
+
+	/* start the phy clock */
+	if (s3cdma->sdata->has_clocks) {
+		ret = clk_enable(phy->clk);
+		if (ret) {
+			dev_err(&s3cdma->pdev->dev, "could not enable clock for channel %d, err %d\n",
+				phy->id, ret);
+			phy->serving = NULL;
+			return NULL;
+		}
+	}
+
+	return phy;
+}
+
+/*
+ * Mark the physical channel as free.
+ *
+ * This drops the link between the physical and virtual channel.
+ */
+static inline void s3c24xx_dma_put_phy(struct s3c24xx_dma_phy *phy)
+{
+	struct s3c24xx_dma_engine *s3cdma = phy->host;
+
+	if (s3cdma->sdata->has_clocks)
+		clk_disable(phy->clk);
+
+	phy->serving = NULL;
+}
+
+/*
+ * Stops the channel by writing the stop bit.
+ * This should not be used for an on-going transfer, but as a method of
+ * shutting down a channel (eg, when it's no longer used) or terminating a
+ * transfer.
+ */
+static void s3c24xx_dma_terminate_phy(struct s3c24xx_dma_phy *phy)
+{
+	writel(S3C24XX_DMASKTRIG_STOP, phy->base + S3C24XX_DMASKTRIG);
+}
+
+/*
+ * Virtual channel handling
+ */
+
+static inline
+struct s3c24xx_dma_chan *to_s3c24xx_dma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct s3c24xx_dma_chan, vc.chan);
+}
+
+static u32 s3c24xx_dma_getbytes_chan(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	struct s3c24xx_txd *txd = s3cchan->at;
+	u32 tc = readl(phy->base + S3C24XX_DSTAT) & S3C24XX_DSTAT_CURRTC_MASK;
+
+	return tc * txd->width;
+}
+
+static int s3c24xx_dma_set_runtime_config(struct s3c24xx_dma_chan *s3cchan,
+				  struct dma_slave_config *config)
+{
+	if (!s3cchan->slave)
+		return -EINVAL;
+
+	/* Reject definitely invalid configurations */
+	if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
+	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+		return -EINVAL;
+
+	s3cchan->cfg = *config;
+
+	return 0;
+}
+
+/*
+ * Transfer handling
+ */
+
+static inline
+struct s3c24xx_txd *to_s3c24xx_txd(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct s3c24xx_txd, vd.tx);
+}
+
+static struct s3c24xx_txd *s3c24xx_dma_get_txd(void)
+{
+	struct s3c24xx_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+
+	if (txd) {
+		INIT_LIST_HEAD(&txd->dsg_list);
+		txd->dcon = S3C24XX_DCON_INT | S3C24XX_DCON_NORELOAD;
+	}
+
+	return txd;
+}
+
+static void s3c24xx_dma_free_txd(struct s3c24xx_txd *txd)
+{
+	struct s3c24xx_sg *dsg, *_dsg;
+
+	list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
+		list_del(&dsg->node);
+		kfree(dsg);
+	}
+
+	kfree(txd);
+}
+
+static void s3c24xx_dma_start_next_sg(struct s3c24xx_dma_chan *s3cchan,
+				       struct s3c24xx_txd *txd)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_sg *dsg = list_entry(txd->at, struct s3c24xx_sg, node);
+	u32 dcon = txd->dcon;
+	u32 val;
+
+	/* transfer-size and -count from len and width */
+	switch (txd->width) {
+	case 1:
+		dcon |= S3C24XX_DCON_DSZ_BYTE | dsg->len;
+		break;
+	case 2:
+		dcon |= S3C24XX_DCON_DSZ_HALFWORD | (dsg->len / 2);
+		break;
+	case 4:
+		dcon |= S3C24XX_DCON_DSZ_WORD | (dsg->len / 4);
+		break;
+	}
+
+	if (s3cchan->slave) {
+		struct s3c24xx_dma_channel *cdata =
+					&pdata->channels[s3cchan->id];
+
+		if (s3cdma->sdata->has_reqsel) {
+			writel_relaxed((cdata->chansel << 1) |
+							S3C24XX_DMAREQSEL_HW,
+					phy->base + S3C24XX_DMAREQSEL);
+		} else {
+			int csel = cdata->chansel >> (phy->id *
+							S3C24XX_CHANSEL_WIDTH);
+
+			csel &= S3C24XX_CHANSEL_REQ_MASK;
+			dcon |= csel << S3C24XX_DCON_HWSRC_SHIFT;
+			dcon |= S3C24XX_DCON_HWTRIG;
+		}
+	} else {
+		if (s3cdma->sdata->has_reqsel)
+			writel_relaxed(0, phy->base + S3C24XX_DMAREQSEL);
+	}
+
+	writel_relaxed(dsg->src_addr, phy->base + S3C24XX_DISRC);
+	writel_relaxed(txd->disrcc, phy->base + S3C24XX_DISRCC);
+	writel_relaxed(dsg->dst_addr, phy->base + S3C24XX_DIDST);
+	writel_relaxed(txd->didstc, phy->base + S3C24XX_DIDSTC);
+	writel_relaxed(dcon, phy->base + S3C24XX_DCON);
+
+	val = readl_relaxed(phy->base + S3C24XX_DMASKTRIG);
+	val &= ~S3C24XX_DMASKTRIG_STOP;
+	val |= S3C24XX_DMASKTRIG_ON;
+
+	/* trigger the dma operation for memcpy transfers */
+	if (!s3cchan->slave)
+		val |= S3C24XX_DMASKTRIG_SWTRIG;
+
+	writel(val, phy->base + S3C24XX_DMASKTRIG);
+}
+
+/*
+ * Set the initial DMA register values and start first sg.
+ */
+static void s3c24xx_dma_start_next_txd(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	struct virt_dma_desc *vd = vchan_next_desc(&s3cchan->vc);
+	struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
+
+	list_del(&txd->vd.node);
+
+	s3cchan->at = txd;
+
+	/* Wait for channel inactive */
+	while (s3c24xx_dma_phy_busy(phy))
+		cpu_relax();
+
+	/* point to the first element of the sg list */
+	txd->at = txd->dsg_list.next;
+	s3c24xx_dma_start_next_sg(s3cchan, txd);
+}
+
+static void s3c24xx_dma_free_txd_list(struct s3c24xx_dma_engine *s3cdma,
+				struct s3c24xx_dma_chan *s3cchan)
+{
+	LIST_HEAD(head);
+
+	vchan_get_all_descriptors(&s3cchan->vc, &head);
+	vchan_dma_desc_free_list(&s3cchan->vc, &head);
+}
+
+/*
+ * Try to allocate a physical channel.  When successful, assign it to
+ * this virtual channel, and initiate the next descriptor.  The
+ * virtual channel lock must be held at this point.
+ */
+static void s3c24xx_dma_phy_alloc_and_start(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_phy *phy;
+
+	phy = s3c24xx_dma_get_phy(s3cchan);
+	if (!phy) {
+		dev_dbg(&s3cdma->pdev->dev, "no physical channel available for xfer on %s\n",
+			s3cchan->name);
+		s3cchan->state = S3C24XX_DMA_CHAN_WAITING;
+		return;
+	}
+
+	dev_dbg(&s3cdma->pdev->dev, "allocated physical channel %d for xfer on %s\n",
+		phy->id, s3cchan->name);
+
+	s3cchan->phy = phy;
+	s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
+
+	s3c24xx_dma_start_next_txd(s3cchan);
+}
+
+static void s3c24xx_dma_phy_reassign_start(struct s3c24xx_dma_phy *phy,
+	struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+
+	dev_dbg(&s3cdma->pdev->dev, "reassigned physical channel %d for xfer on %s\n",
+		phy->id, s3cchan->name);
+
+	/*
+	 * We do this without taking the lock; we're really only concerned
+	 * about whether this pointer is NULL or not, and we're guaranteed
+	 * that this will only be called when it _already_ is non-NULL.
+	 */
+	phy->serving = s3cchan;
+	s3cchan->phy = phy;
+	s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
+	s3c24xx_dma_start_next_txd(s3cchan);
+}
+
+/*
+ * Free a physical DMA channel, potentially reallocating it to another
+ * virtual channel if we have any pending.
+ */
+static void s3c24xx_dma_phy_free(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_chan *p, *next;
+
+retry:
+	next = NULL;
+
+	/* Find a waiting virtual channel for the next transfer. */
+	list_for_each_entry(p, &s3cdma->memcpy.channels, vc.chan.device_node)
+		if (p->state == S3C24XX_DMA_CHAN_WAITING) {
+			next = p;
+			break;
+		}
+
+	if (!next) {
+		list_for_each_entry(p, &s3cdma->slave.channels,
+				    vc.chan.device_node)
+			if (p->state == S3C24XX_DMA_CHAN_WAITING &&
+				      s3c24xx_dma_phy_valid(p, s3cchan->phy)) {
+				next = p;
+				break;
+			}
+	}
+
+	/* Ensure that the physical channel is stopped */
+	s3c24xx_dma_terminate_phy(s3cchan->phy);
+
+	if (next) {
+		bool success;
+
+		/*
+		 * Eww.  We know this isn't going to deadlock
+		 * but lockdep probably doesn't.
+		 */
+		spin_lock(&next->vc.lock);
+		/* Re-check the state now that we have the lock */
+		success = next->state == S3C24XX_DMA_CHAN_WAITING;
+		if (success)
+			s3c24xx_dma_phy_reassign_start(s3cchan->phy, next);
+		spin_unlock(&next->vc.lock);
+
+		/* If the state changed, try to find another channel */
+		if (!success)
+			goto retry;
+	} else {
+		/* No more jobs, so free up the physical channel */
+		s3c24xx_dma_put_phy(s3cchan->phy);
+	}
+
+	s3cchan->phy = NULL;
+	s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
+}
+
+static void s3c24xx_dma_unmap_buffers(struct s3c24xx_txd *txd)
+{
+	struct device *dev = txd->vd.tx.chan->device->dev;
+	struct s3c24xx_sg *dsg;
+
+	if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+		if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_single(dev, dsg->src_addr, dsg->len,
+						DMA_TO_DEVICE);
+		else {
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_page(dev, dsg->src_addr, dsg->len,
+						DMA_TO_DEVICE);
+		}
+	}
+
+	if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+		if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_single(dev, dsg->dst_addr, dsg->len,
+						DMA_FROM_DEVICE);
+		else
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_page(dev, dsg->dst_addr, dsg->len,
+						DMA_FROM_DEVICE);
+	}
+}
+
+static void s3c24xx_dma_desc_free(struct virt_dma_desc *vd)
+{
+	struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(vd->tx.chan);
+
+	if (!s3cchan->slave)
+		s3c24xx_dma_unmap_buffers(txd);
+
+	s3c24xx_dma_free_txd(txd);
+}
+
+static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
+{
+	struct s3c24xx_dma_phy *phy = data;
+	struct s3c24xx_dma_chan *s3cchan = phy->serving;
+	struct s3c24xx_txd *txd;
+
+	dev_dbg(&phy->host->pdev->dev, "interrupt on channel %d\n", phy->id);
+
+	/*
+	 * Interrupts happen to notify the completion of a transfer and the
+	 * channel should have moved into its stop state already on its own.
+	 * Therefore interrupts on channels not bound to a virtual channel
+	 * should never happen. Nevertheless send a terminate command to the
+	 * channel if the unlikely case happens.
+	 */
+	if (unlikely(!s3cchan)) {
+		dev_err(&phy->host->pdev->dev, "interrupt on unused channel %d\n",
+			phy->id);
+
+		s3c24xx_dma_terminate_phy(phy);
+
+		return IRQ_HANDLED;
+	}
+
+	spin_lock(&s3cchan->vc.lock);
+	txd = s3cchan->at;
+	if (txd) {
+		/* when more sg's are in this txd, start the next one */
+		if (!list_is_last(txd->at, &txd->dsg_list)) {
+			txd->at = txd->at->next;
+			s3c24xx_dma_start_next_sg(s3cchan, txd);
+		} else {
+			s3cchan->at = NULL;
+			vchan_cookie_complete(&txd->vd);
+
+			/*
+			 * And start the next descriptor (if any),
+			 * otherwise free this channel.
+			 */
+			if (vchan_next_desc(&s3cchan->vc))
+				s3c24xx_dma_start_next_txd(s3cchan);
+			else
+				s3c24xx_dma_phy_free(s3cchan);
+		}
+	}
+	spin_unlock(&s3cchan->vc.lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * The DMA ENGINE API
+ */
+
+static int s3c24xx_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+			 unsigned long arg)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+
+	switch (cmd) {
+	case DMA_SLAVE_CONFIG:
+		ret = s3c24xx_dma_set_runtime_config(s3cchan,
+					      (struct dma_slave_config *)arg);
+		break;
+	case DMA_TERMINATE_ALL:
+		if (!s3cchan->phy && !s3cchan->at) {
+			dev_err(&s3cdma->pdev->dev, "trying to terminate already stopped channel %d\n",
+				s3cchan->id);
+			ret = -EINVAL;
+			break;
+		}
+
+		s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
+
+		 /* Mark physical channel as free */
+		if (s3cchan->phy)
+			s3c24xx_dma_phy_free(s3cchan);
+
+		/* Dequeue current job */
+		if (s3cchan->at) {
+			s3c24xx_dma_desc_free(&s3cchan->at->vd);
+			s3cchan->at = NULL;
+		}
+
+		/* Dequeue jobs not yet fired as well */
+		s3c24xx_dma_free_txd_list(s3cdma, s3cchan);
+		break;
+	default:
+		/* Unknown command */
+		ret = -ENXIO;
+		break;
+	}
+
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+
+	return ret;
+}
+
+static int s3c24xx_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	return 0;
+}
+
+static void s3c24xx_dma_free_chan_resources(struct dma_chan *chan)
+{
+	/* Ensure all queued descriptors are freed */
+	vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	struct virt_dma_desc *vd;
+	unsigned long flags;
+	enum dma_status ret;
+	size_t bytes = 0;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_SUCCESS) {
+		spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+		return ret;
+	}
+
+	/*
+	 * There's no point calculating the residue if there's
+	 * no txstate to store the value.
+	 */
+	if (!txstate) {
+		spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+		return ret;
+	}
+
+	vd = vchan_find_desc(&s3cchan->vc, cookie);
+	if (vd) {
+		/* On the issued list, so hasn't been processed yet */
+		txd = to_s3c24xx_txd(&vd->tx);
+
+		list_for_each_entry(dsg, &txd->dsg_list, node)
+			bytes += dsg->len;
+	} else {
+		/*
+		 * Currently running, so sum over the pending sg's and
+		 * the currently active one.
+		 */
+		txd = s3cchan->at;
+
+		dsg = list_entry(txd->at, struct s3c24xx_sg, node);
+		list_for_each_entry_from(dsg, &txd->dsg_list, node)
+			bytes += dsg->len;
+
+		bytes += s3c24xx_dma_getbytes_chan(s3cchan);
+	}
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+
+	/*
+	 * This cookie not complete yet
+	 * Get number of bytes left in the active transactions and queue
+	 */
+	dma_set_residue(txstate, bytes);
+
+	/* Whether waiting or running, we're in progress */
+	return ret;
+}
+
+/*
+ * Initialize a descriptor to be used by memcpy submit
+ */
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(
+		struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	int src_mod, dest_mod;
+
+	dev_dbg(&s3cdma->pdev->dev, "prepare memcpy of %d bytes from %s\n",
+			len, s3cchan->name);
+
+	if ((len & S3C24XX_DCON_TC_MASK) != len) {
+		dev_err(&s3cdma->pdev->dev, "memcpy size %d to large\n", len);
+		return NULL;
+	}
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+	if (!dsg) {
+		s3c24xx_dma_free_txd(txd);
+		return NULL;
+	}
+	list_add_tail(&dsg->node, &txd->dsg_list);
+
+	dsg->src_addr = src;
+	dsg->dst_addr = dest;
+	dsg->len = len;
+
+	/*
+	 * Determine a suitable transfer width.
+	 * The DMA controller cannot fetch/store information which is not
+	 * naturally aligned on the bus, i.e., a 4 byte fetch must start at
+	 * an address divisible by 4 - more generally addr % width must be 0.
+	 */
+	src_mod = src % 4;
+	dest_mod = dest % 4;
+	switch (len % 4) {
+	case 0:
+		txd->width = (src_mod == 0 && dest_mod == 0) ? 4 : 1;
+		break;
+	case 2:
+		txd->width = ((src_mod == 2 || src_mod == 0) &&
+			      (dest_mod == 2 || dest_mod == 0)) ? 2 : 1;
+		break;
+	default:
+		txd->width = 1;
+		break;
+	}
+
+	txd->disrcc = S3C24XX_DISRCC_LOC_AHB | S3C24XX_DISRCC_INC_INCREMENT;
+	txd->didstc = S3C24XX_DIDSTC_LOC_AHB | S3C24XX_DIDSTC_INC_INCREMENT;
+	txd->dcon |= S3C24XX_DCON_DEMAND | S3C24XX_DCON_SYNC_HCLK |
+		     S3C24XX_DCON_SERV_WHOLE;
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	struct scatterlist *sg;
+	dma_addr_t slave_addr;
+	u32 hwcfg = 0;
+	int tmp;
+
+	dev_dbg(&s3cdma->pdev->dev, "prepare transaction of %d bytes from %s\n",
+			sg_dma_len(sgl), s3cchan->name);
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	if (cdata->handshake)
+		txd->dcon |= S3C24XX_DCON_HANDSHAKE;
+
+	switch (cdata->bus) {
+	case S3C24XX_DMA_APB:
+		txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_APB;
+		break;
+	case S3C24XX_DMA_AHB:
+		txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_AHB;
+		break;
+	}
+
+	/*
+	 * Always assume our peripheral desintation is a fixed
+	 * address in memory.
+	 */
+	hwcfg |= S3C24XX_DISRCC_INC_FIXED;
+
+	/*
+	 * Individual dma operations are requested by the slave,
+	 * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
+	 */
+	txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
+
+	if (direction == DMA_MEM_TO_DEV) {
+		txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
+			      S3C24XX_DISRCC_INC_INCREMENT;
+		txd->didstc = hwcfg;
+		slave_addr = s3cchan->cfg.dst_addr;
+		txd->width = s3cchan->cfg.dst_addr_width;
+	} else if (direction == DMA_DEV_TO_MEM) {
+		txd->disrcc = hwcfg;
+		txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
+			      S3C24XX_DIDSTC_INC_INCREMENT;
+		slave_addr = s3cchan->cfg.src_addr;
+		txd->width = s3cchan->cfg.src_addr_width;
+	} else {
+		s3c24xx_dma_free_txd(txd);
+		dev_err(&s3cdma->pdev->dev,
+			"direction %d unsupported\n", direction);
+		return NULL;
+	}
+
+	for_each_sg(sgl, sg, sg_len, tmp) {
+		dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+		if (!dsg) {
+			s3c24xx_dma_free_txd(txd);
+			return NULL;
+		}
+		list_add_tail(&dsg->node, &txd->dsg_list);
+
+		dsg->len = sg_dma_len(sg);
+		if (direction == DMA_MEM_TO_DEV) {
+			dsg->src_addr = sg_dma_address(sg);
+			dsg->dst_addr = slave_addr;
+		} else { /* DMA_DEV_TO_MEM */
+			dsg->src_addr = slave_addr;
+			dsg->dst_addr = sg_dma_address(sg);
+		}
+		break;
+	}
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
+/*
+ * Slave transactions callback to the slave device to allow
+ * synchronization of slave DMA signals with the DMAC enable
+ */
+static void s3c24xx_dma_issue_pending(struct dma_chan *chan)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+	if (vchan_issue_pending(&s3cchan->vc)) {
+		if (!s3cchan->phy && s3cchan->state != S3C24XX_DMA_CHAN_WAITING)
+			s3c24xx_dma_phy_alloc_and_start(s3cchan);
+	}
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+}
+
+/*
+ * Bringup and teardown
+ */
+
+/*
+ * Initialise the DMAC memcpy/slave channels.
+ * Make a local wrapper to hold required data
+ */
+static int s3c24xx_dma_init_virtual_channels(struct s3c24xx_dma_engine *s3cdma,
+		struct dma_device *dmadev, unsigned int channels, bool slave)
+{
+	struct s3c24xx_dma_chan *chan;
+	int i;
+
+	INIT_LIST_HEAD(&dmadev->channels);
+
+	/*
+	 * Register as many many memcpy as we have physical channels,
+	 * we won't always be able to use all but the code will have
+	 * to cope with that situation.
+	 */
+	for (i = 0; i < channels; i++) {
+		chan = devm_kzalloc(dmadev->dev, sizeof(*chan), GFP_KERNEL);
+		if (!chan) {
+			dev_err(dmadev->dev,
+				"%s no memory for channel\n", __func__);
+			return -ENOMEM;
+		}
+
+		chan->id = i;
+		chan->host = s3cdma;
+		chan->state = S3C24XX_DMA_CHAN_IDLE;
+
+		if (slave) {
+			chan->slave = true;
+			chan->name = kasprintf(GFP_KERNEL, "slave%d", i);
+			if (!chan->name)
+				return -ENOMEM;
+		} else {
+			chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
+			if (!chan->name)
+				return -ENOMEM;
+		}
+		dev_dbg(dmadev->dev,
+			 "initialize virtual channel \"%s\"\n",
+			 chan->name);
+
+		chan->vc.desc_free = s3c24xx_dma_desc_free;
+		vchan_init(&chan->vc, dmadev);
+	}
+	dev_info(dmadev->dev, "initialized %d virtual %s channels\n",
+		 i, slave ? "slave" : "memcpy");
+	return i;
+}
+
+static void s3c24xx_dma_free_virtual_channels(struct dma_device *dmadev)
+{
+	struct s3c24xx_dma_chan *chan = NULL;
+	struct s3c24xx_dma_chan *next;
+
+	list_for_each_entry_safe(chan,
+				 next, &dmadev->channels, vc.chan.device_node)
+		list_del(&chan->vc.chan.device_node);
+}
+
+/* s3c2410, s3c2440 and s3c2442 have a 0x40 stride without separate clocks */
+static struct soc_data soc_s3c2410 = {
+	.stride = 0x40,
+	.has_reqsel = false,
+	.has_clocks = false,
+};
+
+/* s3c2412 and s3c2413 have a 0x40 stride and dmareqsel mechanism */
+static struct soc_data soc_s3c2412 = {
+	.stride = 0x40,
+	.has_reqsel = true,
+	.has_clocks = true,
+};
+
+/* s3c2443 and following have a 0x100 stride and dmareqsel mechanism */
+static struct soc_data soc_s3c2443 = {
+	.stride = 0x100,
+	.has_reqsel = true,
+	.has_clocks = true,
+};
+
+static struct platform_device_id s3c24xx_dma_driver_ids[] = {
+	{
+		.name		= "s3c2410-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2410,
+	}, {
+		.name		= "s3c2412-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2412,
+	}, {
+		.name		= "s3c2443-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2443,
+	},
+	{ },
+};
+
+static struct soc_data *s3c24xx_dma_get_soc_data(struct platform_device *pdev)
+{
+	return (struct soc_data *)
+			 platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_dma_probe(struct platform_device *pdev)
+{
+	const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
+	struct s3c24xx_dma_engine *s3cdma;
+	struct soc_data *sdata;
+	struct resource *res;
+	int ret;
+	int i;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	/* Basic sanity check */
+	if (pdata->num_phy_channels > MAX_DMA_CHANNELS) {
+		dev_err(&pdev->dev, "to many dma channels %d, max %d\n",
+			pdata->num_phy_channels, MAX_DMA_CHANNELS);
+		return -EINVAL;
+	}
+
+	sdata = s3c24xx_dma_get_soc_data(pdev);
+	if (!sdata)
+		return -EINVAL;
+
+	s3cdma = devm_kzalloc(&pdev->dev, sizeof(*s3cdma), GFP_KERNEL);
+	if (!s3cdma)
+		return -ENOMEM;
+
+	s3cdma->pdev = pdev;
+	s3cdma->pdata = pdata;
+	s3cdma->sdata = sdata;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	s3cdma->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(s3cdma->base))
+		return PTR_ERR(s3cdma->base);
+
+	s3cdma->phy_chans = devm_kzalloc(&pdev->dev,
+					      sizeof(struct s3c24xx_dma_phy) *
+							pdata->num_phy_channels,
+					      GFP_KERNEL);
+	if (!s3cdma->phy_chans)
+		return -ENOMEM;
+
+	/* aquire irqs and clocks for all physical channels */
+	for (i = 0; i < pdata->num_phy_channels; i++) {
+		struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+		char clk_name[6];
+
+		phy->id = i;
+		phy->base = s3cdma->base + (i * sdata->stride);
+		phy->host = s3cdma;
+
+		phy->irq = platform_get_irq(pdev, i);
+		if (phy->irq < 0) {
+			dev_err(&pdev->dev, "failed to get irq %d, err %d\n",
+				i, phy->irq);
+			continue;
+		}
+
+		ret = devm_request_irq(&pdev->dev, phy->irq, s3c24xx_dma_irq,
+				       0, pdev->name, phy);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to request irq for channel %d, error %d\n",
+				i, ret);
+			continue;
+		}
+
+		if (sdata->has_clocks) {
+			sprintf(clk_name, "dma.%d", i);
+			phy->clk = devm_clk_get(&pdev->dev, clk_name);
+			if (IS_ERR(phy->clk) && sdata->has_clocks) {
+				dev_err(&pdev->dev, "unable to aquire clock for channel %d, error %lu",
+					i, PTR_ERR(phy->clk));
+				continue;
+			}
+
+			ret = clk_prepare(phy->clk);
+			if (ret) {
+				dev_err(&pdev->dev, "clock for phy %d failed, error %d\n",
+					i, ret);
+				continue;
+			}
+		}
+
+		spin_lock_init(&phy->lock);
+		phy->valid = true;
+
+		dev_dbg(&pdev->dev, "physical channel %d is %s\n",
+			i, s3c24xx_dma_phy_busy(phy) ? "BUSY" : "FREE");
+	}
+
+	/* Initialize memcpy engine */
+	dma_cap_set(DMA_MEMCPY, s3cdma->memcpy.cap_mask);
+	dma_cap_set(DMA_PRIVATE, s3cdma->memcpy.cap_mask);
+	s3cdma->memcpy.dev = &pdev->dev;
+	s3cdma->memcpy.device_alloc_chan_resources =
+					s3c24xx_dma_alloc_chan_resources;
+	s3cdma->memcpy.device_free_chan_resources =
+					s3c24xx_dma_free_chan_resources;
+	s3cdma->memcpy.device_prep_dma_memcpy = s3c24xx_dma_prep_memcpy;
+	s3cdma->memcpy.device_tx_status = s3c24xx_dma_tx_status;
+	s3cdma->memcpy.device_issue_pending = s3c24xx_dma_issue_pending;
+	s3cdma->memcpy.device_control = s3c24xx_dma_control;
+
+	/* Initialize slave engine for SoC internal dedicated peripherals */
+	dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask);
+	dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask);
+	s3cdma->slave.dev = &pdev->dev;
+	s3cdma->slave.device_alloc_chan_resources =
+					s3c24xx_dma_alloc_chan_resources;
+	s3cdma->slave.device_free_chan_resources =
+					s3c24xx_dma_free_chan_resources;
+	s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status;
+	s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending;
+	s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg;
+	s3cdma->slave.device_control = s3c24xx_dma_control;
+
+	/* Register as many memcpy channels as there are physical channels */
+	ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->memcpy,
+						pdata->num_phy_channels, false);
+	if (ret <= 0) {
+		dev_warn(&pdev->dev,
+			 "%s failed to enumerate memcpy channels - %d\n",
+			 __func__, ret);
+		goto err_memcpy;
+	}
+
+	/* Register slave channels */
+	ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->slave,
+				pdata->num_channels, true);
+	if (ret <= 0) {
+		dev_warn(&pdev->dev,
+			"%s failed to enumerate slave channels - %d\n",
+				__func__, ret);
+		goto err_slave;
+	}
+
+	ret = dma_async_device_register(&s3cdma->memcpy);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"%s failed to register memcpy as an async device - %d\n",
+			__func__, ret);
+		goto err_memcpy_reg;
+	}
+
+	ret = dma_async_device_register(&s3cdma->slave);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"%s failed to register slave as an async device - %d\n",
+			__func__, ret);
+		goto err_slave_reg;
+	}
+
+	platform_set_drvdata(pdev, s3cdma);
+	dev_info(&pdev->dev, "Loaded dma driver with %d physical channels\n",
+		 pdata->num_phy_channels);
+
+	return 0;
+
+err_slave_reg:
+	dma_async_device_unregister(&s3cdma->memcpy);
+err_memcpy_reg:
+	s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
+err_slave:
+	s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
+err_memcpy:
+	if (sdata->has_clocks)
+		for (i = 0; i < pdata->num_phy_channels; i++) {
+			struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+			if (phy->valid)
+				clk_unprepare(phy->clk);
+		}
+
+	return ret;
+}
+
+static int s3c24xx_dma_remove(struct platform_device *pdev)
+{
+	const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
+	struct s3c24xx_dma_engine *s3cdma = platform_get_drvdata(pdev);
+	struct soc_data *sdata = s3c24xx_dma_get_soc_data(pdev);
+	int i;
+
+	dma_async_device_unregister(&s3cdma->slave);
+	dma_async_device_unregister(&s3cdma->memcpy);
+
+	s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
+	s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
+
+	if (sdata->has_clocks)
+		for (i = 0; i < pdata->num_phy_channels; i++) {
+			struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+			if (phy->valid)
+				clk_unprepare(phy->clk);
+		}
+
+	return 0;
+}
+
+static struct platform_driver s3c24xx_dma_driver = {
+	.driver		= {
+		.name	= "s3c24xx-dma",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= s3c24xx_dma_driver_ids,
+	.probe		= s3c24xx_dma_probe,
+	.remove		= s3c24xx_dma_remove,
+};
+
+module_platform_driver(s3c24xx_dma_driver);
+
+bool s3c24xx_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct s3c24xx_dma_chan *s3cchan;
+
+	if (chan->device->dev->driver != &s3c24xx_dma_driver.driver)
+		return false;
+
+	s3cchan = to_s3c24xx_dma_chan(chan);
+
+	return s3cchan->id == (int)param;
+}
+EXPORT_SYMBOL(s3c24xx_dma_filter);
+
+MODULE_DESCRIPTION("S3C24XX DMA Driver");
+MODULE_AUTHOR("Heiko Stuebner");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 5985807..e23f1c2 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -27,16 +27,16 @@
 
 /**
  * struct adc_jack_data - internal data for adc_jack device driver
- * @edev        - extcon device.
- * @cable_names - list of supported cables.
- * @num_cables  - size of cable_names.
- * @adc_conditions       - list of adc value conditions.
- * @num_conditions       - size of adc_conditions.
- * @irq         - irq number of attach/detach event (0 if not exist).
- * @handling_delay      - interrupt handler will schedule extcon event
- *                      handling at handling_delay jiffies.
- * @handler     - extcon event handler called by interrupt handler.
- * @chan       - iio channel being queried.
+ * @edev:		extcon device.
+ * @cable_names:	list of supported cables.
+ * @num_cables:		size of cable_names.
+ * @adc_conditions:	list of adc value conditions.
+ * @num_conditions:	size of adc_conditions.
+ * @irq:		irq number of attach/detach event (0 if not exist).
+ * @handling_delay:	interrupt handler will schedule extcon event
+ *			handling at handling_delay jiffies.
+ * @handler:		extcon event handler called by interrupt handler.
+ * @chan:		iio channel being queried.
  */
 struct adc_jack_data {
 	struct extcon_dev edev;
@@ -64,7 +64,7 @@
 
 	ret = iio_read_channel_raw(data->chan, &adc_val);
 	if (ret < 0) {
-		dev_err(data->edev.dev, "read channel() error: %d\n", ret);
+		dev_err(&data->edev.dev, "read channel() error: %d\n", ret);
 		return;
 	}
 
@@ -95,7 +95,7 @@
 static int adc_jack_probe(struct platform_device *pdev)
 {
 	struct adc_jack_data *data;
-	struct adc_jack_pdata *pdata = pdev->dev.platform_data;
+	struct adc_jack_pdata *pdata = dev_get_platdata(&pdev->dev);
 	int i, err = 0;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
@@ -110,6 +110,7 @@
 		goto out;
 	}
 
+	data->edev.dev.parent = &pdev->dev;
 	data->edev.supported_cable = pdata->cable_names;
 
 	/* Check the length of array and set num_cables */
@@ -148,7 +149,7 @@
 
 	platform_set_drvdata(pdev, data);
 
-	err = extcon_dev_register(&data->edev, &pdev->dev);
+	err = extcon_dev_register(&data->edev);
 	if (err)
 		goto out;
 
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index e557130..3c55ec8 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -86,8 +86,8 @@
 };
 
 static const struct arizona_micd_config micd_default_modes[] = {
-	{ ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
-	{ 0,                  2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
+	{ ARIZONA_ACCDET_SRC, 1, 0 },
+	{ 0,                  2, 1 },
 };
 
 static const struct arizona_micd_range micd_default_ranges[] = {
@@ -182,7 +182,8 @@
 					info->micd_modes[mode].gpio);
 	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
 			   ARIZONA_MICD_BIAS_SRC_MASK,
-			   info->micd_modes[mode].bias);
+			   info->micd_modes[mode].bias <<
+			   ARIZONA_MICD_BIAS_SRC_SHIFT);
 	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
 			   ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
 
@@ -193,7 +194,7 @@
 
 static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
 {
-	switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) {
+	switch (info->micd_modes[0].bias) {
 	case 1:
 		return "MICBIAS1";
 	case 2:
@@ -388,7 +389,7 @@
 			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
 
 		if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
-		    (val < 100 || val > 0x3fb)) {
+		    (val < 100 || val >= 0x3fb)) {
 			range++;
 			dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
 				range);
@@ -401,7 +402,7 @@
 		}
 
 		/* If we go out of range report top of range */
-		if (val < 100 || val > 0x3fb) {
+		if (val < 100 || val >= 0x3fb) {
 			dev_dbg(arizona->dev, "Measurement out of range\n");
 			return ARIZONA_HPDET_MAX;
 		}
@@ -514,7 +515,7 @@
 		}
 
 		/*
-		 * If we measure the mic as 
+		 * If we measure the mic as high impedance
 		 */
 		if (!id_gpio || info->hpdet_res[1] > 50) {
 			dev_dbg(arizona->dev, "Detected mic\n");
@@ -564,11 +565,10 @@
 	}
 
 	ret = arizona_hpdet_read(info);
-	if (ret == -EAGAIN) {
+	if (ret == -EAGAIN)
 		goto out;
-	} else if (ret < 0) {
+	else if (ret < 0)
 		goto done;
-	}
 	reading = ret;
 
 	/* Reset back to starting range */
@@ -578,11 +578,10 @@
 			   0);
 
 	ret = arizona_hpdet_do_id(info, &reading, &mic);
-	if (ret == -EAGAIN) {
+	if (ret == -EAGAIN)
 		goto out;
-	} else if (ret < 0) {
+	else if (ret < 0)
 		goto done;
-	}
 
 	/* Report high impedence cables as line outputs */
 	if (reading >= 5000)
@@ -738,8 +737,8 @@
 static void arizona_micd_timeout_work(struct work_struct *work)
 {
 	struct arizona_extcon_info *info = container_of(work,
-							struct arizona_extcon_info,
-							micd_timeout_work.work);
+						struct arizona_extcon_info,
+						micd_timeout_work.work);
 
 	mutex_lock(&info->lock);
 
@@ -756,8 +755,8 @@
 static void arizona_micd_detect(struct work_struct *work)
 {
 	struct arizona_extcon_info *info = container_of(work,
-							struct arizona_extcon_info,
-							micd_detect_work.work);
+						struct arizona_extcon_info,
+						micd_detect_work.work);
 	struct arizona *arizona = info->arizona;
 	unsigned int val = 0, lvl;
 	int ret, i, key;
@@ -769,7 +768,8 @@
 	for (i = 0; i < 10 && !(val & 0x7fc); i++) {
 		ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
 		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to read MICDET: %d\n", ret);
+			dev_err(arizona->dev,
+				"Failed to read MICDET: %d\n", ret);
 			mutex_unlock(&info->lock);
 			return;
 		}
@@ -777,7 +777,8 @@
 		dev_dbg(arizona->dev, "MICDET: %x\n", val);
 
 		if (!(val & ARIZONA_MICD_VALID)) {
-			dev_warn(arizona->dev, "Microphone detection state invalid\n");
+			dev_warn(arizona->dev,
+				 "Microphone detection state invalid\n");
 			mutex_unlock(&info->lock);
 			return;
 		}
@@ -925,8 +926,8 @@
 static void arizona_hpdet_work(struct work_struct *work)
 {
 	struct arizona_extcon_info *info = container_of(work,
-							struct arizona_extcon_info,
-							hpdet_work.work);
+						struct arizona_extcon_info,
+						hpdet_work.work);
 
 	mutex_lock(&info->lock);
 	arizona_start_hpdet_acc_id(info);
@@ -973,10 +974,13 @@
 					   &info->hpdet_work,
 					   msecs_to_jiffies(HPDET_DEBOUNCE));
 
-		if (cancelled_mic)
+		if (cancelled_mic) {
+			int micd_timeout = info->micd_timeout;
+
 			queue_delayed_work(system_power_efficient_wq,
 					   &info->micd_timeout_work,
-					   msecs_to_jiffies(info->micd_timeout));
+					   msecs_to_jiffies(micd_timeout));
+		}
 
 		goto out;
 	}
@@ -1039,6 +1043,7 @@
 	else
 		info->micd_timeout = DEFAULT_MICD_TIMEOUT;
 
+out:
 	/* Clear trig_sts to make sure DCVDD is not forced up */
 	regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
 		     ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
@@ -1046,7 +1051,6 @@
 		     ARIZONA_JD1_FALL_TRIG_STS |
 		     ARIZONA_JD1_RISE_TRIG_STS);
 
-out:
 	mutex_unlock(&info->lock);
 
 	pm_runtime_mark_last_busy(info->dev);
@@ -1129,9 +1133,10 @@
 	}
 
 	info->edev.name = "Headset Jack";
+	info->edev.dev.parent = arizona->dev;
 	info->edev.supported_cable = arizona_cable;
 
-	ret = extcon_dev_register(&info->edev, arizona->dev);
+	ret = extcon_dev_register(&info->edev);
 	if (ret < 0) {
 		dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
 			ret);
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
index 148382f..15443d3 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -74,7 +74,7 @@
 
 /**
  * check_mutually_exclusive - Check if new_state violates mutually_exclusive
- *			    condition.
+ *			      condition.
  * @edev:	the extcon device
  * @new_state:	new cable attach status for @edev
  *
@@ -105,7 +105,7 @@
 			  char *buf)
 {
 	int i, count = 0;
-	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+	struct extcon_dev *edev = dev_get_drvdata(dev);
 
 	if (edev->print_state) {
 		int ret = edev->print_state(edev, buf);
@@ -129,13 +129,12 @@
 	return count;
 }
 
-int extcon_set_state(struct extcon_dev *edev, u32 state);
 static ssize_t state_store(struct device *dev, struct device_attribute *attr,
 			   const char *buf, size_t count)
 {
 	u32 state;
 	ssize_t ret = 0;
-	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+	struct extcon_dev *edev = dev_get_drvdata(dev);
 
 	ret = sscanf(buf, "0x%x", &state);
 	if (ret == 0)
@@ -153,7 +152,7 @@
 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
-	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+	struct extcon_dev *edev = dev_get_drvdata(dev);
 
 	/* Optional callback given by the user */
 	if (edev->print_name) {
@@ -162,7 +161,7 @@
 			return ret;
 	}
 
-	return sprintf(buf, "%s\n", dev_name(edev->dev));
+	return sprintf(buf, "%s\n", dev_name(&edev->dev));
 }
 static DEVICE_ATTR_RO(name);
 
@@ -189,7 +188,7 @@
 
 /**
  * extcon_update_state() - Update the cable attach states of the extcon device
- *			only for the masked bits.
+ *			   only for the masked bits.
  * @edev:	the extcon device
  * @mask:	the bit mask to designate updated bits.
  * @state:	new cable attach status for @edev
@@ -227,11 +226,10 @@
 		edev->state |= state & mask;
 
 		raw_notifier_call_chain(&edev->nh, old_state, edev);
-
 		/* This could be in interrupt handler */
 		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
 		if (prop_buf) {
-			length = name_show(edev->dev, NULL, prop_buf);
+			length = name_show(&edev->dev, NULL, prop_buf);
 			if (length > 0) {
 				if (prop_buf[length - 1] == '\n')
 					prop_buf[length - 1] = 0;
@@ -239,7 +237,7 @@
 					"NAME=%s", prop_buf);
 				envp[env_offset++] = name_buf;
 			}
-			length = state_show(edev->dev, NULL, prop_buf);
+			length = state_show(&edev->dev, NULL, prop_buf);
 			if (length > 0) {
 				if (prop_buf[length - 1] == '\n')
 					prop_buf[length - 1] = 0;
@@ -251,14 +249,14 @@
 			/* Unlock early before uevent */
 			spin_unlock_irqrestore(&edev->lock, flags);
 
-			kobject_uevent_env(&edev->dev->kobj, KOBJ_CHANGE, envp);
+			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
 			free_page((unsigned long)prop_buf);
 		} else {
 			/* Unlock early before uevent */
 			spin_unlock_irqrestore(&edev->lock, flags);
 
-			dev_err(edev->dev, "out of memory in extcon_set_state\n");
-			kobject_uevent(&edev->dev->kobj, KOBJ_CHANGE);
+			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
 		}
 	} else {
 		/* No changes */
@@ -339,8 +337,9 @@
 
 /**
  * extcon_set_cable_state_() - Set the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @index:	cable index that can be retrieved by extcon_find_cable_index().
+ * @edev:		the extcon device that has the cable.
+ * @index:		cable index that can be retrieved by
+ *			extcon_find_cable_index().
  * @cable_state:	the new cable status. The default semantics is
  *			true: attached / false: detached.
  */
@@ -359,8 +358,8 @@
 
 /**
  * extcon_set_cable_state() - Set the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @cable_name:	cable name.
+ * @edev:		the extcon device that has the cable.
+ * @cable_name:		cable name.
  * @cable_state:	the new cable status. The default semantics is
  *			true: attached / false: detached.
  *
@@ -419,14 +418,14 @@
 
 /**
  * extcon_register_interest() - Register a notifier for a state change of a
- *			      specific cable, not an entier set of cables of a
- *			      extcon device.
- * @obj:	an empty extcon_specific_cable_nb object to be returned.
+ *				specific cable, not an entier set of cables of a
+ *				extcon device.
+ * @obj:		an empty extcon_specific_cable_nb object to be returned.
  * @extcon_name:	the name of extcon device.
  *			if NULL, extcon_register_interest will register
  *			every cable with the target cable_name given.
  * @cable_name:		the target cable name.
- * @nb:		the notifier block to get notified.
+ * @nb:			the notifier block to get notified.
  *
  * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
  * the struct for you.
@@ -452,7 +451,8 @@
 		if (!obj->edev)
 			return -ENODEV;
 
-		obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
+		obj->cable_index = extcon_find_cable_index(obj->edev,
+							  cable_name);
 		if (obj->cable_index < 0)
 			return obj->cable_index;
 
@@ -460,7 +460,8 @@
 
 		obj->internal_nb.notifier_call = _call_per_cable;
 
-		return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+		return raw_notifier_chain_register(&obj->edev->nh,
+						  &obj->internal_nb);
 	} else {
 		struct class_dev_iter iter;
 		struct extcon_dev *extd;
@@ -470,7 +471,7 @@
 			return -ENODEV;
 		class_dev_iter_init(&iter, extcon_class, NULL, NULL);
 		while ((dev = class_dev_iter_next(&iter))) {
-			extd = (struct extcon_dev *)dev_get_drvdata(dev);
+			extd = dev_get_drvdata(dev);
 
 			if (extcon_find_cable_index(extd, cable_name) < 0)
 				continue;
@@ -487,7 +488,7 @@
 
 /**
  * extcon_unregister_interest() - Unregister the notifier registered by
- *				extcon_register_interest().
+ *				  extcon_register_interest().
  * @obj:	the extcon_specific_cable_nb object returned by
  *		extcon_register_interest().
  */
@@ -502,7 +503,7 @@
 
 /**
  * extcon_register_notifier() - Register a notifiee to get notified by
- *			      any attach status changes from the extcon.
+ *				any attach status changes from the extcon.
  * @edev:	the extcon device.
  * @nb:		a notifier block to be registered.
  *
@@ -556,7 +557,6 @@
 
 static void extcon_dev_release(struct device *dev)
 {
-	kfree(dev);
 }
 
 static const char *muex_name = "mutually_exclusive";
@@ -567,14 +567,13 @@
 /**
  * extcon_dev_register() - Register a new extcon device
  * @edev	: the new extcon device (should be allocated before calling)
- * @dev		: the parent device for this extcon device.
  *
  * Among the members of edev struct, please set the "user initializing data"
  * in any case and set the "optional callbacks" if required. However, please
  * do not set the values of "internal data", which are initialized by
  * this function.
  */
-int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
+int extcon_dev_register(struct extcon_dev *edev)
 {
 	int ret, index = 0;
 
@@ -594,19 +593,20 @@
 	}
 
 	if (index > SUPPORTED_CABLE_MAX) {
-		dev_err(edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+		dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n");
 		return -EINVAL;
 	}
 
-	edev->dev = kzalloc(sizeof(struct device), GFP_KERNEL);
-	if (!edev->dev)
-		return -ENOMEM;
-	edev->dev->parent = dev;
-	edev->dev->class = extcon_class;
-	edev->dev->release = extcon_dev_release;
+	edev->dev.class = extcon_class;
+	edev->dev.release = extcon_dev_release;
 
-	edev->name = edev->name ? edev->name : dev_name(dev);
-	dev_set_name(edev->dev, "%s", edev->name);
+	edev->name = edev->name ? edev->name : dev_name(edev->dev.parent);
+	if (IS_ERR_OR_NULL(edev->name)) {
+		dev_err(&edev->dev,
+			"extcon device name is null\n");
+		return -EINVAL;
+	}
+	dev_set_name(&edev->dev, "%s", edev->name);
 
 	if (edev->max_supported) {
 		char buf[10];
@@ -714,7 +714,7 @@
 			goto err_alloc_groups;
 		}
 
-		edev->extcon_dev_type.name = dev_name(edev->dev);
+		edev->extcon_dev_type.name = dev_name(&edev->dev);
 		edev->extcon_dev_type.release = dummy_sysfs_dev_release;
 
 		for (index = 0; index < edev->max_supported; index++)
@@ -724,25 +724,24 @@
 			edev->extcon_dev_type.groups[index] =
 				&edev->attr_g_muex;
 
-		edev->dev->type = &edev->extcon_dev_type;
+		edev->dev.type = &edev->extcon_dev_type;
 	}
 
-	ret = device_register(edev->dev);
+	ret = device_register(&edev->dev);
 	if (ret) {
-		put_device(edev->dev);
+		put_device(&edev->dev);
 		goto err_dev;
 	}
 #if defined(CONFIG_ANDROID)
 	if (switch_class)
-		ret = class_compat_create_link(switch_class, edev->dev,
-					       NULL);
+		ret = class_compat_create_link(switch_class, &edev->dev, NULL);
 #endif /* CONFIG_ANDROID */
 
 	spin_lock_init(&edev->lock);
 
 	RAW_INIT_NOTIFIER_HEAD(&edev->nh);
 
-	dev_set_drvdata(edev->dev, edev);
+	dev_set_drvdata(&edev->dev, edev);
 	edev->state = 0;
 
 	mutex_lock(&extcon_dev_list_lock);
@@ -768,7 +767,6 @@
 	if (edev->max_supported)
 		kfree(edev->cables);
 err_sysfs_alloc:
-	kfree(edev->dev);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(extcon_dev_register);
@@ -788,9 +786,9 @@
 	list_del(&edev->entry);
 	mutex_unlock(&extcon_dev_list_lock);
 
-	if (IS_ERR_OR_NULL(get_device(edev->dev))) {
-		dev_err(edev->dev, "Failed to unregister extcon_dev (%s)\n",
-				dev_name(edev->dev));
+	if (IS_ERR_OR_NULL(get_device(&edev->dev))) {
+		dev_err(&edev->dev, "Failed to unregister extcon_dev (%s)\n",
+				dev_name(&edev->dev));
 		return;
 	}
 
@@ -812,10 +810,10 @@
 
 #if defined(CONFIG_ANDROID)
 	if (switch_class)
-		class_compat_remove_link(switch_class, edev->dev, NULL);
+		class_compat_remove_link(switch_class, &edev->dev, NULL);
 #endif
-	device_unregister(edev->dev);
-	put_device(edev->dev);
+	device_unregister(&edev->dev);
+	put_device(&edev->dev);
 }
 EXPORT_SYMBOL_GPL(extcon_dev_unregister);
 
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index f874c30..7e0dff5 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -34,6 +34,7 @@
 struct gpio_extcon_data {
 	struct extcon_dev edev;
 	unsigned gpio;
+	bool gpio_active_low;
 	const char *state_on;
 	const char *state_off;
 	int irq;
@@ -49,6 +50,8 @@
 			     work);
 
 	state = gpio_get_value(data->gpio);
+	if (data->gpio_active_low)
+		state = !state;
 	extcon_set_state(&data->edev, state);
 }
 
@@ -78,9 +81,9 @@
 
 static int gpio_extcon_probe(struct platform_device *pdev)
 {
-	struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct gpio_extcon_data *extcon_data;
-	int ret = 0;
+	int ret;
 
 	if (!pdata)
 		return -EBUSY;
@@ -95,14 +98,22 @@
 		return -ENOMEM;
 
 	extcon_data->edev.name = pdata->name;
+	extcon_data->edev.dev.parent = &pdev->dev;
 	extcon_data->gpio = pdata->gpio;
+	extcon_data->gpio_active_low = pdata->gpio_active_low;
 	extcon_data->state_on = pdata->state_on;
 	extcon_data->state_off = pdata->state_off;
 	if (pdata->state_on && pdata->state_off)
 		extcon_data->edev.print_state = extcon_gpio_print_state;
-	extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
+	if (pdata->debounce) {
+		ret = gpio_set_debounce(extcon_data->gpio,
+					pdata->debounce * 1000);
+		if (ret < 0)
+			extcon_data->debounce_jiffies =
+				msecs_to_jiffies(pdata->debounce);
+	}
 
-	ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
+	ret = extcon_dev_register(&extcon_data->edev);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index b56bdaa..da268fb 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -189,14 +189,17 @@
 
 	/* The below accessories have same ADC value so ADCLow and
 	   ADC1K bit is used to separate specific accessory */
-	MAX77693_MUIC_GND_USB_OTG = 0x100,	/* ADC:0x0, VBVolot:0, ADCLow:0, ADC1K:0 */
-	MAX77693_MUIC_GND_USB_OTG_VB = 0x104,	/* ADC:0x0, VBVolot:1, ADCLow:0, ADC1K:0 */
-	MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:0 */
-	MAX77693_MUIC_GND_MHL = 0x103,		/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:1 */
-	MAX77693_MUIC_GND_MHL_VB = 0x107,	/* ADC:0x0, VBVolot:1, ADCLow:1, ADC1K:1 */
+						/* ADC|VBVolot|ADCLow|ADC1K| */
+	MAX77693_MUIC_GND_USB_OTG = 0x100,	/* 0x0|      0|     0|    0| */
+	MAX77693_MUIC_GND_USB_OTG_VB = 0x104,	/* 0x0|      1|     0|    0| */
+	MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0|      0|     1|    0| */
+	MAX77693_MUIC_GND_MHL = 0x103,		/* 0x0|      0|     1|    1| */
+	MAX77693_MUIC_GND_MHL_VB = 0x107,	/* 0x0|      1|     1|    1| */
 };
 
-/* MAX77693 MUIC device support below list of accessories(external connector) */
+/*
+ * MAX77693 MUIC device support below list of accessories(external connector)
+ */
 enum {
 	EXTCON_CABLE_USB = 0,
 	EXTCON_CABLE_USB_HOST,
@@ -395,12 +398,12 @@
 			vbvolt >>= STATUS2_VBVOLT_SHIFT;
 
 			/**
-			 * [0x1][VBVolt][ADCLow][ADC1K]
-			 * [0x1    0	   0       0  ]	: USB_OTG
-			 * [0x1    1	   0       0  ]	: USB_OTG_VB
-			 * [0x1    0       1       0  ] : Audio Video Cable with load
-			 * [0x1    0       1       1  ] : MHL without charging connector
-			 * [0x1    1       1       1  ] : MHL with charging connector
+			 * [0x1|VBVolt|ADCLow|ADC1K]
+			 * [0x1|     0|     0|    0] USB_OTG
+			 * [0x1|     1|     0|    0] USB_OTG_VB
+			 * [0x1|     0|     1|    0] Audio Video cable with load
+			 * [0x1|     0|     1|    1] MHL without charging cable
+			 * [0x1|     1|     1|    1] MHL with charging cable
 			 */
 			cable_type = ((0x1 << 8)
 					| (vbvolt << 2)
@@ -723,11 +726,11 @@
 		if (ret < 0)
 			return ret;
 		break;
-	case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON:	/* DOCK_KEY_PREV */
-	case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON:	/* DOCK_KEY_NEXT */
-	case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:	/* DOCK_VOL_DOWN */
-	case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:	/* DOCK_VOL_UP */
-	case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON:	/* DOCK_KEY_PLAY_PAUSE */
+	case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON:      /* DOCK_KEY_PREV */
+	case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON:      /* DOCK_KEY_NEXT */
+	case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:      /* DOCK_VOL_DOWN */
+	case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:     /* DOCK_VOL_UP */
+	case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON:     /* DOCK_KEY_PLAY_PAUSE */
 		/*
 		 * Button of DOCK device
 		 * - the Prev/Next/Volume Up/Volume Down/Play-Pause button
@@ -815,19 +818,21 @@
 		case MAX77693_MUIC_GND_MHL_VB:
 			/*
 			 * MHL cable with MHL_TA(USB/TA) cable
-			 * - MHL cable include two port(HDMI line and separate micro-
-			 * usb port. When the target connect MHL cable, extcon driver
-			 * check whether MHL_TA(USB/TA) cable is connected. If MHL_TA
-			 * cable is connected, extcon driver notify state to notifiee
-			 * for charging battery.
+			 * - MHL cable include two port(HDMI line and separate
+			 * micro-usb port. When the target connect MHL cable,
+			 * extcon driver check whether MHL_TA(USB/TA) cable is
+			 * connected. If MHL_TA cable is connected, extcon
+			 * driver notify state to notifiee for charging battery.
 			 *
 			 * Features of 'MHL_TA(USB/TA) with MHL cable'
 			 * - Support MHL
-			 * - Support charging through micro-usb port without data connection
+			 * - Support charging through micro-usb port without
+			 *   data connection
 			 */
 			extcon_set_cable_state(info->edev, "MHL_TA", attached);
 			if (!cable_attached)
-				extcon_set_cable_state(info->edev, "MHL", cable_attached);
+				extcon_set_cable_state(info->edev,
+						      "MHL", cable_attached);
 			break;
 		}
 
@@ -839,47 +844,51 @@
 		case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
 			/*
 			 * Dock-Audio device with USB/TA cable
-			 * - Dock device include two port(Dock-Audio and micro-usb
-			 * port). When the target connect Dock-Audio device, extcon
-			 * driver check whether USB/TA cable is connected. If USB/TA
-			 * cable is connected, extcon driver notify state to notifiee
-			 * for charging battery.
+			 * - Dock device include two port(Dock-Audio and micro-
+			 * usb port). When the target connect Dock-Audio device,
+			 * extcon driver check whether USB/TA cable is connected
+			 * or not. If USB/TA cable is connected, extcon driver
+			 * notify state to notifiee for charging battery.
 			 *
 			 * Features of 'USB/TA cable with Dock-Audio device'
 			 * - Support external output feature of audio.
-			 * - Support charging through micro-usb port without data
-			 *           connection.
+			 * - Support charging through micro-usb port without
+			 *   data connection.
 			 */
 			extcon_set_cable_state(info->edev, "USB", attached);
 
 			if (!cable_attached)
-				extcon_set_cable_state(info->edev, "Dock-Audio", cable_attached);
+				extcon_set_cable_state(info->edev, "Dock-Audio",
+						      cable_attached);
 			break;
 		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
 			/*
 			 * Dock-Smart device with USB/TA cable
 			 * - Dock-Desk device include three type of cable which
 			 * are HDMI, USB for mouse/keyboard and micro-usb port
-			 * for USB/TA cable. Dock-Smart device need always exteranl
-			 * power supply(USB/TA cable through micro-usb cable). Dock-
-			 * Smart device support screen output of target to separate
-			 * monitor and mouse/keyboard for desktop mode.
+			 * for USB/TA cable. Dock-Smart device need always
+			 * exteranl power supply(USB/TA cable through micro-usb
+			 * cable). Dock-Smart device support screen output of
+			 * target to separate monitor and mouse/keyboard for
+			 * desktop mode.
 			 *
 			 * Features of 'USB/TA cable with Dock-Smart device'
 			 * - Support MHL
 			 * - Support external output feature of audio
-			 * - Support charging through micro-usb port without data
-			 *	     connection if TA cable is connected to target.
-			 * - Support charging and data connection through micro-usb port
-			 *           if USB cable is connected between target and host
-			 *	     device.
+			 * - Support charging through micro-usb port without
+			 *   data connection if TA cable is connected to target.
+			 * - Support charging and data connection through micro-
+			 *   usb port if USB cable is connected between target
+			 *   and host device
 			 * - Support OTG device (Mouse/Keyboard)
 			 */
-			ret = max77693_muic_set_path(info, info->path_usb, attached);
+			ret = max77693_muic_set_path(info, info->path_usb,
+						    attached);
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state(info->edev, "Dock-Smart", attached);
+			extcon_set_cable_state(info->edev, "Dock-Smart",
+					      attached);
 			extcon_set_cable_state(info->edev, "MHL", attached);
 
 			break;
@@ -889,25 +898,28 @@
 		switch (chg_type) {
 		case MAX77693_CHARGER_TYPE_NONE:
 			/*
-			 * When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable
-			 * is attached, muic device happen below two interrupt.
-			 * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio.
-			 * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable
-			 *   connected to MHL or Dock-Audio.
-			 * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt
-			 * than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt.
+			 * When MHL(with USB/TA cable) or Dock-Audio with USB/TA
+			 * cable is attached, muic device happen below two irq.
+			 * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting
+			 *    MHL/Dock-Audio.
+			 * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting
+			 *    USB/TA cable connected to MHL or Dock-Audio.
+			 * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC
+			 * irq than MAX77693_MUIC_IRQ_INT2_CHGTYP irq.
 			 *
-			 * If user attach MHL (with USB/TA cable and immediately detach
-			 * MHL with USB/TA cable before MAX77693_MUIC_IRQ_INT2_CHGTYP
-			 * interrupt is happened, USB/TA cable remain connected state to
-			 * target. But USB/TA cable isn't connected to target. The user
-			 * be face with unusual action. So, driver should check this
-			 * situation in spite of, that previous charger type is N/A.
+			 * If user attach MHL (with USB/TA cable and immediately
+			 * detach MHL with USB/TA cable before MAX77693_MUIC_IRQ
+			 * _INT2_CHGTYP irq is happened, USB/TA cable remain
+			 * connected state to target. But USB/TA cable isn't
+			 * connected to target. The user be face with unusual
+			 * action. So, driver should check this situation in
+			 * spite of, that previous charger type is N/A.
 			 */
 			break;
 		case MAX77693_CHARGER_TYPE_USB:
 			/* Only USB cable, PATH:AP_USB */
-			ret = max77693_muic_set_path(info, info->path_usb, attached);
+			ret = max77693_muic_set_path(info, info->path_usb,
+						    attached);
 			if (ret < 0)
 				return ret;
 
@@ -953,7 +965,7 @@
 
 	mutex_lock(&info->mutex);
 
-	for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++)
+	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
 		if (info->irq == muic_irqs[i].virq)
 			irq_type = muic_irqs[i].irq;
 
@@ -1171,8 +1183,9 @@
 		goto err_irq;
 	}
 	info->edev->name = DEV_NAME;
+	info->edev->dev.parent = &pdev->dev;
 	info->edev->supported_cable = max77693_extcon_cable;
-	ret = extcon_dev_register(info->edev, NULL);
+	ret = extcon_dev_register(info->edev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
 		goto err_irq;
@@ -1188,7 +1201,7 @@
 		num_init_data = ARRAY_SIZE(default_init_data);
 	}
 
-	for (i = 0 ; i < num_init_data ; i++) {
+	for (i = 0; i < num_init_data; i++) {
 		enum max77693_irq_source irq_src
 				= MAX77693_IRQ_GROUP_NR;
 
@@ -1214,7 +1227,8 @@
 	}
 
 	if (pdata->muic_data) {
-		struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
+		struct max77693_muic_platform_data *muic_pdata
+						   = pdata->muic_data;
 
 		/*
 		 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 67d6738..6a00464 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -426,7 +426,8 @@
 		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
-		ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, attached);
+		ret = max8997_muic_handle_usb(info,
+					     MAX8997_USB_DEVICE, attached);
 		if (ret < 0)
 			return ret;
 		break;
@@ -504,7 +505,8 @@
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev, "Charge-downstream", attached);
+		extcon_set_cable_state(info->edev,
+				      "Charge-downstream", attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
 		extcon_set_cable_state(info->edev, "TA", attached);
@@ -537,7 +539,7 @@
 
 	mutex_lock(&info->mutex);
 
-	for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++)
+	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
 		if (info->irq == muic_irqs[i].virq)
 			irq_type = muic_irqs[i].irq;
 
@@ -705,8 +707,9 @@
 		goto err_irq;
 	}
 	info->edev->name = DEV_NAME;
+	info->edev->dev.parent = &pdev->dev;
 	info->edev->supported_cable = max8997_extcon_cable;
-	ret = extcon_dev_register(info->edev, NULL);
+	ret = extcon_dev_register(info->edev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
 		goto err_irq;
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 89fdd05..6c91976 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -135,7 +135,7 @@
 static int palmas_usb_probe(struct platform_device *pdev)
 {
 	struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
-	struct palmas_usb_platform_data	*pdata = pdev->dev.platform_data;
+	struct palmas_usb_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct device_node *node = pdev->dev.of_node;
 	struct palmas_usb *palmas_usb;
 	int status;
@@ -178,9 +178,10 @@
 	platform_set_drvdata(pdev, palmas_usb);
 
 	palmas_usb->edev.supported_cable = palmas_extcon_cable;
+	palmas_usb->edev.dev.parent = palmas_usb->dev;
 	palmas_usb->edev.mutually_exclusive = mutually_exclusive;
 
-	status = extcon_dev_register(&palmas_usb->edev, palmas_usb->dev);
+	status = extcon_dev_register(&palmas_usb->edev);
 	if (status) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
 		return status;
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 17df6db..8847adf 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -15,8 +15,9 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-
-#include <asm/mach/irq.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 struct davinci_gpio_regs {
 	u32	dir;
@@ -31,13 +32,14 @@
 	u32	intstat;
 };
 
+#define BINTEN	0x8 /* GPIO Interrupt Per-Bank Enable Register */
+
 #define chip2controller(chip)	\
 	container_of(chip, struct davinci_gpio_controller, chip)
 
-static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 static void __iomem *gpio_base;
 
-static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+static struct davinci_gpio_regs __iomem *gpio2regs(unsigned gpio)
 {
 	void __iomem *ptr;
 
@@ -65,7 +67,7 @@
 	return g;
 }
 
-static int __init davinci_gpio_irq_setup(void);
+static int davinci_gpio_irq_setup(struct platform_device *pdev);
 
 /*--------------------------------------------------------------------------*/
 
@@ -131,33 +133,53 @@
 	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
 }
 
-static int __init davinci_gpio_setup(void)
+static int davinci_gpio_probe(struct platform_device *pdev)
 {
 	int i, base;
 	unsigned ngpio;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs *regs;
+	struct davinci_gpio_controller *chips;
+	struct davinci_gpio_platform_data *pdata;
+	struct davinci_gpio_regs __iomem *regs;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
 
-	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
-		return 0;
+	pdata = dev->platform_data;
+	if (!pdata) {
+		dev_err(dev, "No platform data found\n");
+		return -EINVAL;
+	}
 
 	/*
 	 * The gpio banks conceptually expose a segmented bitmap,
 	 * and "ngpio" is one more than the largest zero-based
 	 * bit index that's valid.
 	 */
-	ngpio = soc_info->gpio_num;
+	ngpio = pdata->ngpio;
 	if (ngpio == 0) {
-		pr_err("GPIO setup:  how many GPIOs?\n");
+		dev_err(dev, "How many GPIOs?\n");
 		return -EINVAL;
 	}
 
 	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
 		ngpio = DAVINCI_N_GPIO;
 
-	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
-	if (WARN_ON(!gpio_base))
+	chips = devm_kzalloc(dev,
+			     ngpio * sizeof(struct davinci_gpio_controller),
+			     GFP_KERNEL);
+	if (!chips) {
+		dev_err(dev, "Memory allocation failed\n");
 		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Invalid memory resource\n");
+		return -EBUSY;
+	}
+
+	gpio_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(gpio_base))
+		return PTR_ERR(gpio_base);
 
 	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
 		chips[i].chip.label = "DaVinci";
@@ -183,13 +205,10 @@
 		gpiochip_add(&chips[i].chip);
 	}
 
-	soc_info->gpio_ctlrs = chips;
-	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-
-	davinci_gpio_irq_setup();
+	platform_set_drvdata(pdev, chips);
+	davinci_gpio_irq_setup(pdev);
 	return 0;
 }
-pure_initcall(davinci_gpio_setup);
 
 /*--------------------------------------------------------------------------*/
 /*
@@ -302,13 +321,14 @@
 
 static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_controller *d = chip2controller(chip);
 
-	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	/*
+	 * NOTE:  we assume for now that only irqs in the first gpio_chip
 	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
 	 */
-	if (offset < soc_info->gpio_unbanked)
-		return soc_info->gpio_irq + offset;
+	if (offset < d->irq_base)
+		return d->gpio_irq + offset;
 	else
 		return -ENODEV;
 }
@@ -317,12 +337,11 @@
 {
 	struct davinci_gpio_controller *d;
 	struct davinci_gpio_regs __iomem *g;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 mask;
 
 	d = (struct davinci_gpio_controller *)data->handler_data;
 	g = (struct davinci_gpio_regs __iomem *)d->regs;
-	mask = __gpio_mask(data->irq - soc_info->gpio_irq);
+	mask = __gpio_mask(data->irq - d->gpio_irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
@@ -343,24 +362,33 @@
  * (dm6446) can be set appropriately for GPIOV33 pins.
  */
 
-static int __init davinci_gpio_irq_setup(void)
+static int davinci_gpio_irq_setup(struct platform_device *pdev)
 {
 	unsigned	gpio, irq, bank;
 	struct clk	*clk;
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs	__iomem *g;
+	struct device *dev = &pdev->dev;
+	struct resource	*res;
+	struct davinci_gpio_controller *chips = platform_get_drvdata(pdev);
+	struct davinci_gpio_platform_data *pdata = dev->platform_data;
+	struct davinci_gpio_regs __iomem *g;
 
-	ngpio = soc_info->gpio_num;
-
-	bank_irq = soc_info->gpio_irq;
-	if (bank_irq == 0) {
-		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
-		return -EINVAL;
+	ngpio = pdata->ngpio;
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Invalid IRQ resource\n");
+		return -EBUSY;
 	}
 
-	clk = clk_get(NULL, "gpio");
+	bank_irq = res->start;
+
+	if (!bank_irq) {
+		dev_err(dev, "Invalid IRQ resource\n");
+		return -ENODEV;
+	}
+
+	clk = devm_clk_get(dev, "gpio");
 	if (IS_ERR(clk)) {
 		printk(KERN_ERR "Error %ld getting gpio clock?\n",
 		       PTR_ERR(clk));
@@ -368,16 +396,17 @@
 	}
 	clk_prepare_enable(clk);
 
-	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	/*
+	 * Arrange gpio_to_irq() support, handling either direct IRQs or
 	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
 	 * IRQs, while the others use banked IRQs, would need some setup
 	 * tweaks to recognize hardware which can do that.
 	 */
 	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
 		chips[bank].chip.to_irq = gpio_to_irq_banked;
-		chips[bank].irq_base = soc_info->gpio_unbanked
+		chips[bank].irq_base = pdata->gpio_unbanked
 			? -EINVAL
-			: (soc_info->intc_irq_num + gpio);
+			: (pdata->intc_irq_num + gpio);
 	}
 
 	/*
@@ -385,7 +414,7 @@
 	 * controller only handling trigger modes.  We currently assume no
 	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
 	 */
-	if (soc_info->gpio_unbanked) {
+	if (pdata->gpio_unbanked) {
 		static struct irq_chip_type gpio_unbanked;
 
 		/* pass "bank 0" GPIO IRQs to AINTC */
@@ -405,7 +434,7 @@
 		__raw_writel(~0, &g->set_rising);
 
 		/* set the direct IRQs up to use that irqchip */
-		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+		for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) {
 			irq_set_chip(irq, &gpio_unbanked.chip);
 			irq_set_handler_data(irq, &chips[gpio / 32]);
 			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
@@ -450,12 +479,31 @@
 	}
 
 done:
-	/* BINTEN -- per-bank interrupt enable. genirq would also let these
+	/*
+	 * BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, gpio_base + 0x08);
+	__raw_writel(binten, gpio_base + BINTEN);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
+
+static struct platform_driver davinci_gpio_driver = {
+	.probe		= davinci_gpio_probe,
+	.driver		= {
+		.name	= "davinci_gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+/**
+ * GPIO driver registration needs to be done before machine_init functions
+ * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall.
+ */
+static int __init davinci_gpio_drv_reg(void)
+{
+	return platform_driver_register(&davinci_gpio_driver);
+}
+postcore_initcall(davinci_gpio_drv_reg);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 358a21c..76e02b9 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -1033,7 +1033,7 @@
 }
 #endif
 
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
 {
 	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -1174,7 +1174,7 @@
  */
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.chip	= {
 			.base	= S3C64XX_GPA(0),
@@ -1227,7 +1227,7 @@
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
 		.chip	= {
@@ -1257,7 +1257,7 @@
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPF_BASE,
 		.config	= &samsung_gpio_cfgs[6],
@@ -2082,34 +2082,14 @@
 	int i, nr_chips;
 	int group = 0;
 
-#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440)
 	/*
-	* This gpio driver includes support for device tree support and there
-	* are platforms using it. In order to maintain compatibility with those
-	* platforms, and to allow non-dt Exynos4210 platforms to use this
-	* gpiolib support, a check is added to find out if there is a active
-	* pin-controller driver support available. If it is available, this
-	* gpiolib support is ignored and the gpiolib support available in
-	* pin-controller driver is used. This is a temporary check and will go
-	* away when all of the Exynos4210 platforms have switched to using
-	* device tree and the pin-ctrl driver.
-	*/
-	struct device_node *pctrl_np;
-	static const struct of_device_id exynos_pinctrl_ids[] = {
-		{ .compatible = "samsung,s3c2412-pinctrl", },
-		{ .compatible = "samsung,s3c2416-pinctrl", },
-		{ .compatible = "samsung,s3c2440-pinctrl", },
-		{ .compatible = "samsung,s3c2450-pinctrl", },
-		{ .compatible = "samsung,exynos4210-pinctrl", },
-		{ .compatible = "samsung,exynos4x12-pinctrl", },
-		{ .compatible = "samsung,exynos5250-pinctrl", },
-		{ .compatible = "samsung,exynos5440-pinctrl", },
-		{ }
-	};
-	for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
-		if (pctrl_np && of_device_is_available(pctrl_np))
-			return -ENODEV;
-#endif
+	 * Currently there are two drivers that can provide GPIO support for
+	 * Samsung SoCs. For device tree enabled platforms, the new
+	 * pinctrl-samsung driver is used, providing both GPIO and pin control
+	 * interfaces. For legacy (non-DT) platforms this driver is used.
+	 */
+	if (of_have_populated_dt())
+		return -ENODEV;
 
 	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
 
diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
index 3fa3e28..58445bb 100644
--- a/drivers/gpio/gpio-tnetv107x.c
+++ b/drivers/gpio/gpio-tnetv107x.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <mach/common.h>
 #include <mach/tnetv107x.h>
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 0dee0e0..dadbac2 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -408,7 +408,7 @@
 			IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
 
 	if (!value_sd) {
-		value_sd = sysfs_get_dirent(dev->kobj.sd, NULL, "value");
+		value_sd = sysfs_get_dirent(dev->kobj.sd, "value");
 		if (!value_sd) {
 			ret = -ENODEV;
 			goto err_out;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index db59bb9..10d1de5 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -107,8 +107,6 @@
 static void intel_crt_get_config(struct intel_encoder *encoder,
 				 struct intel_crtc_config *pipe_config)
 {
-	struct drm_device *dev = encoder->base.dev;
-
 	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
 }
 
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 10e1581..88fc5ae 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -465,6 +465,39 @@
 	return 1;
 }
 
+int sensor_hub_device_open(struct hid_sensor_hub_device *hsdev)
+{
+	int ret = 0;
+	struct sensor_hub_data *data =  hid_get_drvdata(hsdev->hdev);
+
+	mutex_lock(&data->mutex);
+	if (!hsdev->ref_cnt) {
+		ret = hid_hw_open(hsdev->hdev);
+		if (ret) {
+			hid_err(hsdev->hdev, "failed to open hid device\n");
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+	}
+	hsdev->ref_cnt++;
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sensor_hub_device_open);
+
+void sensor_hub_device_close(struct hid_sensor_hub_device *hsdev)
+{
+	struct sensor_hub_data *data =  hid_get_drvdata(hsdev->hdev);
+
+	mutex_lock(&data->mutex);
+	hsdev->ref_cnt--;
+	if (!hsdev->ref_cnt)
+		hid_hw_close(hsdev->hdev);
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL_GPL(sensor_hub_device_close);
+
 static int sensor_hub_probe(struct hid_device *hdev,
 				const struct hid_device_id *id)
 {
@@ -506,12 +539,6 @@
 		hid_err(hdev, "hw start failed\n");
 		return ret;
 	}
-	ret = hid_hw_open(hdev);
-	if (ret) {
-		hid_err(hdev, "failed to open input interrupt pipe\n");
-		goto err_stop_hw;
-	}
-
 	INIT_LIST_HEAD(&sd->dyn_callback_list);
 	sd->hid_sensor_client_cnt = 0;
 	report_enum = &hdev->report_enum[HID_INPUT_REPORT];
@@ -520,7 +547,7 @@
 	if (dev_cnt > HID_MAX_PHY_DEVICES) {
 		hid_err(hdev, "Invalid Physical device count\n");
 		ret = -EINVAL;
-		goto err_close;
+		goto err_stop_hw;
 	}
 	sd->hid_sensor_hub_client_devs = kzalloc(dev_cnt *
 						sizeof(struct mfd_cell),
@@ -528,7 +555,7 @@
 	if (sd->hid_sensor_hub_client_devs == NULL) {
 		hid_err(hdev, "Failed to allocate memory for mfd cells\n");
 			ret = -ENOMEM;
-			goto err_close;
+			goto err_stop_hw;
 	}
 	list_for_each_entry(report, &report_enum->report_list, list) {
 		hid_dbg(hdev, "Report id:%x\n", report->id);
@@ -565,8 +592,6 @@
 	for (i = 0; i < sd->hid_sensor_client_cnt ; ++i)
 		kfree(sd->hid_sensor_hub_client_devs[i].name);
 	kfree(sd->hid_sensor_hub_client_devs);
-err_close:
-	hid_hw_close(hdev);
 err_stop_hw:
 	hid_hw_stop(hdev);
 
diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c
index 66d4458..749f7b5 100644
--- a/drivers/hsi/hsi.c
+++ b/drivers/hsi/hsi.c
@@ -33,11 +33,13 @@
 {
 	return sprintf(buf, "hsi:%s\n", dev_name(dev));
 }
+static DEVICE_ATTR_RO(modalias);
 
-static struct device_attribute hsi_bus_dev_attrs[] = {
-	__ATTR_RO(modalias),
-	__ATTR_NULL,
+static struct attribute *hsi_bus_dev_attrs[] = {
+	&dev_attr_modalias.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(hsi_bus_dev);
 
 static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
@@ -53,7 +55,7 @@
 
 static struct bus_type hsi_bus_type = {
 	.name		= "hsi",
-	.dev_attrs	= hsi_bus_dev_attrs,
+	.dev_groups	= hsi_bus_dev_groups,
 	.match		= hsi_bus_match,
 	.uevent		= hsi_bus_uevent,
 };
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 6de6c98..cea623c 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -47,8 +47,8 @@
 			(unsigned long *) vmbus_connection.send_int_page +
 			(channel->offermsg.child_relid >> 5));
 
-		monitorpage = vmbus_connection.monitor_pages;
-		monitorpage++; /* Get the child to parent monitor page */
+		/* Get the child to parent monitor page */
+		monitorpage = vmbus_connection.monitor_pages[1];
 
 		sync_set_bit(channel->monitor_bit,
 			(unsigned long *)&monitorpage->trigger_group
@@ -60,50 +60,6 @@
 }
 
 /*
- * vmbus_get_debug_info -Retrieve various channel debug info
- */
-void vmbus_get_debug_info(struct vmbus_channel *channel,
-			      struct vmbus_channel_debug_info *debuginfo)
-{
-	struct hv_monitor_page *monitorpage;
-	u8 monitor_group = (u8)channel->offermsg.monitorid / 32;
-	u8 monitor_offset = (u8)channel->offermsg.monitorid % 32;
-
-	debuginfo->relid = channel->offermsg.child_relid;
-	debuginfo->state = channel->state;
-	memcpy(&debuginfo->interfacetype,
-	       &channel->offermsg.offer.if_type, sizeof(uuid_le));
-	memcpy(&debuginfo->interface_instance,
-	       &channel->offermsg.offer.if_instance,
-	       sizeof(uuid_le));
-
-	monitorpage = (struct hv_monitor_page *)vmbus_connection.monitor_pages;
-
-	debuginfo->monitorid = channel->offermsg.monitorid;
-
-	debuginfo->servermonitor_pending =
-			monitorpage->trigger_group[monitor_group].pending;
-	debuginfo->servermonitor_latency =
-			monitorpage->latency[monitor_group][monitor_offset];
-	debuginfo->servermonitor_connectionid =
-			monitorpage->parameter[monitor_group]
-					[monitor_offset].connectionid.u.id;
-
-	monitorpage++;
-
-	debuginfo->clientmonitor_pending =
-			monitorpage->trigger_group[monitor_group].pending;
-	debuginfo->clientmonitor_latency =
-			monitorpage->latency[monitor_group][monitor_offset];
-	debuginfo->clientmonitor_connectionid =
-			monitorpage->parameter[monitor_group]
-					[monitor_offset].connectionid.u.id;
-
-	hv_ringbuffer_get_debuginfo(&channel->inbound, &debuginfo->inbound);
-	hv_ringbuffer_get_debuginfo(&channel->outbound, &debuginfo->outbound);
-}
-
-/*
  * vmbus_open - Open the specified channel.
  */
 int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
@@ -855,6 +811,6 @@
 	if (signal)
 		vmbus_setevent(channel);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(vmbus_recvpacket_raw);
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index bbff5f2..fa92046 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -203,7 +203,8 @@
 	struct vmbus_channel *primary_channel;
 	struct vmbus_channel_relid_released msg;
 
-	vmbus_device_unregister(channel->device_obj);
+	if (channel->device_obj)
+		vmbus_device_unregister(channel->device_obj);
 	memset(&msg, 0, sizeof(struct vmbus_channel_relid_released));
 	msg.child_relid = channel->offermsg.child_relid;
 	msg.header.msgtype = CHANNELMSG_RELID_RELEASED;
@@ -216,7 +217,7 @@
 	} else {
 		primary_channel = channel->primary_channel;
 		spin_lock_irqsave(&primary_channel->sc_lock, flags);
-		list_del(&channel->listentry);
+		list_del(&channel->sc_list);
 		spin_unlock_irqrestore(&primary_channel->sc_lock, flags);
 	}
 	free_channel(channel);
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index 936093e..af6edf9 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -76,10 +76,8 @@
 	msg->header.msgtype = CHANNELMSG_INITIATE_CONTACT;
 	msg->vmbus_version_requested = version;
 	msg->interrupt_page = virt_to_phys(vmbus_connection.int_page);
-	msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages);
-	msg->monitor_page2 = virt_to_phys(
-			(void *)((unsigned long)vmbus_connection.monitor_pages +
-				 PAGE_SIZE));
+	msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
+	msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
 
 	/*
 	 * Add to list before we send the request since we may
@@ -169,9 +167,10 @@
 	 * Setup the monitor notification facility. The 1st page for
 	 * parent->child and the 2nd page for child->parent
 	 */
-	vmbus_connection.monitor_pages =
-	(void *)__get_free_pages((GFP_KERNEL|__GFP_ZERO), 1);
-	if (vmbus_connection.monitor_pages == NULL) {
+	vmbus_connection.monitor_pages[0] = (void *)__get_free_pages((GFP_KERNEL|__GFP_ZERO), 0);
+	vmbus_connection.monitor_pages[1] = (void *)__get_free_pages((GFP_KERNEL|__GFP_ZERO), 0);
+	if ((vmbus_connection.monitor_pages[0] == NULL) ||
+	    (vmbus_connection.monitor_pages[1] == NULL)) {
 		ret = -ENOMEM;
 		goto cleanup;
 	}
@@ -229,10 +228,10 @@
 		vmbus_connection.int_page = NULL;
 	}
 
-	if (vmbus_connection.monitor_pages) {
-		free_pages((unsigned long)vmbus_connection.monitor_pages, 1);
-		vmbus_connection.monitor_pages = NULL;
-	}
+	free_pages((unsigned long)vmbus_connection.monitor_pages[0], 1);
+	free_pages((unsigned long)vmbus_connection.monitor_pages[1], 1);
+	vmbus_connection.monitor_pages[0] = NULL;
+	vmbus_connection.monitor_pages[1] = NULL;
 
 	kfree(msginfo);
 
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 88f4096..f0c5e07 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -304,7 +304,7 @@
 void hv_synic_free_cpu(int cpu)
 {
 	kfree(hv_context.event_dpc[cpu]);
-	if (hv_context.synic_message_page[cpu])
+	if (hv_context.synic_event_page[cpu])
 		free_page((unsigned long)hv_context.synic_event_page[cpu]);
 	if (hv_context.synic_message_page[cpu])
 		free_page((unsigned long)hv_context.synic_message_page[cpu]);
diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index 273e3dd..62dfd246 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -97,7 +97,7 @@
 	struct vmbus_channel *channel = context;
 	u32 recvlen;
 	u64 requestid;
-	u8  execute_shutdown = false;
+	bool execute_shutdown = false;
 	u8  *shut_txf_buf = util_shutdown.recv_buffer;
 
 	struct shutdown_msg_data *shutdown_msg;
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index d84918f..e055176 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -514,6 +514,13 @@
 
 extern struct hv_context hv_context;
 
+struct hv_ring_buffer_debug_info {
+	u32 current_interrupt_mask;
+	u32 current_read_index;
+	u32 current_write_index;
+	u32 bytes_avail_toread;
+	u32 bytes_avail_towrite;
+};
 
 /* Hv Interface */
 
@@ -612,7 +619,7 @@
 	 * 2 pages - 1st page for parent->child notification and 2nd
 	 * is child->parent notification
 	 */
-	void *monitor_pages;
+	struct hv_monitor_page *monitor_pages[2];
 	struct list_head chn_msg_list;
 	spinlock_t channelmsg_lock;
 
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index f9fe46f..48aad4f 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -46,24 +46,6 @@
 static struct completion probe_event;
 static int irq;
 
-struct hv_device_info {
-	u32 chn_id;
-	u32 chn_state;
-	uuid_le chn_type;
-	uuid_le chn_instance;
-
-	u32 monitor_id;
-	u32 server_monitor_pending;
-	u32 server_monitor_latency;
-	u32 server_monitor_conn_id;
-	u32 client_monitor_pending;
-	u32 client_monitor_latency;
-	u32 client_monitor_conn_id;
-
-	struct hv_dev_port_info inbound;
-	struct hv_dev_port_info outbound;
-};
-
 static int vmbus_exists(void)
 {
 	if (hv_acpi_dev == NULL)
@@ -72,52 +54,6 @@
 	return 0;
 }
 
-
-static void get_channel_info(struct hv_device *device,
-			     struct hv_device_info *info)
-{
-	struct vmbus_channel_debug_info debug_info;
-
-	if (!device->channel)
-		return;
-
-	vmbus_get_debug_info(device->channel, &debug_info);
-
-	info->chn_id = debug_info.relid;
-	info->chn_state = debug_info.state;
-	memcpy(&info->chn_type, &debug_info.interfacetype,
-	       sizeof(uuid_le));
-	memcpy(&info->chn_instance, &debug_info.interface_instance,
-	       sizeof(uuid_le));
-
-	info->monitor_id = debug_info.monitorid;
-
-	info->server_monitor_pending = debug_info.servermonitor_pending;
-	info->server_monitor_latency = debug_info.servermonitor_latency;
-	info->server_monitor_conn_id = debug_info.servermonitor_connectionid;
-
-	info->client_monitor_pending = debug_info.clientmonitor_pending;
-	info->client_monitor_latency = debug_info.clientmonitor_latency;
-	info->client_monitor_conn_id = debug_info.clientmonitor_connectionid;
-
-	info->inbound.int_mask = debug_info.inbound.current_interrupt_mask;
-	info->inbound.read_idx = debug_info.inbound.current_read_index;
-	info->inbound.write_idx = debug_info.inbound.current_write_index;
-	info->inbound.bytes_avail_toread =
-		debug_info.inbound.bytes_avail_toread;
-	info->inbound.bytes_avail_towrite =
-		debug_info.inbound.bytes_avail_towrite;
-
-	info->outbound.int_mask =
-		debug_info.outbound.current_interrupt_mask;
-	info->outbound.read_idx = debug_info.outbound.current_read_index;
-	info->outbound.write_idx = debug_info.outbound.current_write_index;
-	info->outbound.bytes_avail_toread =
-		debug_info.outbound.bytes_avail_toread;
-	info->outbound.bytes_avail_towrite =
-		debug_info.outbound.bytes_avail_towrite;
-}
-
 #define VMBUS_ALIAS_LEN ((sizeof((struct hv_vmbus_device_id *)0)->guid) * 2)
 static void print_alias_name(struct hv_device *hv_dev, char *alias_name)
 {
@@ -126,115 +62,353 @@
 		sprintf(&alias_name[i], "%02x", hv_dev->dev_type.b[i/2]);
 }
 
-/*
- * vmbus_show_device_attr - Show the device attribute in sysfs.
- *
- * This is invoked when user does a
- * "cat /sys/bus/vmbus/devices/<busdevice>/<attr name>"
- */
-static ssize_t vmbus_show_device_attr(struct device *dev,
-				      struct device_attribute *dev_attr,
-				      char *buf)
+static u8 channel_monitor_group(struct vmbus_channel *channel)
 {
-	struct hv_device *hv_dev = device_to_hv_device(dev);
-	struct hv_device_info *device_info;
-	char alias_name[VMBUS_ALIAS_LEN + 1];
-	int ret = 0;
-
-	device_info = kzalloc(sizeof(struct hv_device_info), GFP_KERNEL);
-	if (!device_info)
-		return ret;
-
-	get_channel_info(hv_dev, device_info);
-
-	if (!strcmp(dev_attr->attr.name, "class_id")) {
-		ret = sprintf(buf, "{%pUl}\n", device_info->chn_type.b);
-	} else if (!strcmp(dev_attr->attr.name, "device_id")) {
-		ret = sprintf(buf, "{%pUl}\n", device_info->chn_instance.b);
-	} else if (!strcmp(dev_attr->attr.name, "modalias")) {
-		print_alias_name(hv_dev, alias_name);
-		ret = sprintf(buf, "vmbus:%s\n", alias_name);
-	} else if (!strcmp(dev_attr->attr.name, "state")) {
-		ret = sprintf(buf, "%d\n", device_info->chn_state);
-	} else if (!strcmp(dev_attr->attr.name, "id")) {
-		ret = sprintf(buf, "%d\n", device_info->chn_id);
-	} else if (!strcmp(dev_attr->attr.name, "out_intr_mask")) {
-		ret = sprintf(buf, "%d\n", device_info->outbound.int_mask);
-	} else if (!strcmp(dev_attr->attr.name, "out_read_index")) {
-		ret = sprintf(buf, "%d\n", device_info->outbound.read_idx);
-	} else if (!strcmp(dev_attr->attr.name, "out_write_index")) {
-		ret = sprintf(buf, "%d\n", device_info->outbound.write_idx);
-	} else if (!strcmp(dev_attr->attr.name, "out_read_bytes_avail")) {
-		ret = sprintf(buf, "%d\n",
-			       device_info->outbound.bytes_avail_toread);
-	} else if (!strcmp(dev_attr->attr.name, "out_write_bytes_avail")) {
-		ret = sprintf(buf, "%d\n",
-			       device_info->outbound.bytes_avail_towrite);
-	} else if (!strcmp(dev_attr->attr.name, "in_intr_mask")) {
-		ret = sprintf(buf, "%d\n", device_info->inbound.int_mask);
-	} else if (!strcmp(dev_attr->attr.name, "in_read_index")) {
-		ret = sprintf(buf, "%d\n", device_info->inbound.read_idx);
-	} else if (!strcmp(dev_attr->attr.name, "in_write_index")) {
-		ret = sprintf(buf, "%d\n", device_info->inbound.write_idx);
-	} else if (!strcmp(dev_attr->attr.name, "in_read_bytes_avail")) {
-		ret = sprintf(buf, "%d\n",
-			       device_info->inbound.bytes_avail_toread);
-	} else if (!strcmp(dev_attr->attr.name, "in_write_bytes_avail")) {
-		ret = sprintf(buf, "%d\n",
-			       device_info->inbound.bytes_avail_towrite);
-	} else if (!strcmp(dev_attr->attr.name, "monitor_id")) {
-		ret = sprintf(buf, "%d\n", device_info->monitor_id);
-	} else if (!strcmp(dev_attr->attr.name, "server_monitor_pending")) {
-		ret = sprintf(buf, "%d\n", device_info->server_monitor_pending);
-	} else if (!strcmp(dev_attr->attr.name, "server_monitor_latency")) {
-		ret = sprintf(buf, "%d\n", device_info->server_monitor_latency);
-	} else if (!strcmp(dev_attr->attr.name, "server_monitor_conn_id")) {
-		ret = sprintf(buf, "%d\n",
-			       device_info->server_monitor_conn_id);
-	} else if (!strcmp(dev_attr->attr.name, "client_monitor_pending")) {
-		ret = sprintf(buf, "%d\n", device_info->client_monitor_pending);
-	} else if (!strcmp(dev_attr->attr.name, "client_monitor_latency")) {
-		ret = sprintf(buf, "%d\n", device_info->client_monitor_latency);
-	} else if (!strcmp(dev_attr->attr.name, "client_monitor_conn_id")) {
-		ret = sprintf(buf, "%d\n",
-			       device_info->client_monitor_conn_id);
-	}
-
-	kfree(device_info);
-	return ret;
+	return (u8)channel->offermsg.monitorid / 32;
 }
 
+static u8 channel_monitor_offset(struct vmbus_channel *channel)
+{
+	return (u8)channel->offermsg.monitorid % 32;
+}
+
+static u32 channel_pending(struct vmbus_channel *channel,
+			   struct hv_monitor_page *monitor_page)
+{
+	u8 monitor_group = channel_monitor_group(channel);
+	return monitor_page->trigger_group[monitor_group].pending;
+}
+
+static u32 channel_latency(struct vmbus_channel *channel,
+			   struct hv_monitor_page *monitor_page)
+{
+	u8 monitor_group = channel_monitor_group(channel);
+	u8 monitor_offset = channel_monitor_offset(channel);
+	return monitor_page->latency[monitor_group][monitor_offset];
+}
+
+static u32 channel_conn_id(struct vmbus_channel *channel,
+			   struct hv_monitor_page *monitor_page)
+{
+	u8 monitor_group = channel_monitor_group(channel);
+	u8 monitor_offset = channel_monitor_offset(channel);
+	return monitor_page->parameter[monitor_group][monitor_offset].connectionid.u.id;
+}
+
+static ssize_t id_show(struct device *dev, struct device_attribute *dev_attr,
+		       char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n", hv_dev->channel->offermsg.child_relid);
+}
+static DEVICE_ATTR_RO(id);
+
+static ssize_t state_show(struct device *dev, struct device_attribute *dev_attr,
+			  char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n", hv_dev->channel->state);
+}
+static DEVICE_ATTR_RO(state);
+
+static ssize_t monitor_id_show(struct device *dev,
+			       struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n", hv_dev->channel->offermsg.monitorid);
+}
+static DEVICE_ATTR_RO(monitor_id);
+
+static ssize_t class_id_show(struct device *dev,
+			       struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "{%pUl}\n",
+		       hv_dev->channel->offermsg.offer.if_type.b);
+}
+static DEVICE_ATTR_RO(class_id);
+
+static ssize_t device_id_show(struct device *dev,
+			      struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "{%pUl}\n",
+		       hv_dev->channel->offermsg.offer.if_instance.b);
+}
+static DEVICE_ATTR_RO(device_id);
+
+static ssize_t modalias_show(struct device *dev,
+			     struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	char alias_name[VMBUS_ALIAS_LEN + 1];
+
+	print_alias_name(hv_dev, alias_name);
+	return sprintf(buf, "vmbus:%s\n", alias_name);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static ssize_t server_monitor_pending_show(struct device *dev,
+					   struct device_attribute *dev_attr,
+					   char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n",
+		       channel_pending(hv_dev->channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+static DEVICE_ATTR_RO(server_monitor_pending);
+
+static ssize_t client_monitor_pending_show(struct device *dev,
+					   struct device_attribute *dev_attr,
+					   char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n",
+		       channel_pending(hv_dev->channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+static DEVICE_ATTR_RO(client_monitor_pending);
+
+static ssize_t server_monitor_latency_show(struct device *dev,
+					   struct device_attribute *dev_attr,
+					   char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n",
+		       channel_latency(hv_dev->channel,
+				       vmbus_connection.monitor_pages[0]));
+}
+static DEVICE_ATTR_RO(server_monitor_latency);
+
+static ssize_t client_monitor_latency_show(struct device *dev,
+					   struct device_attribute *dev_attr,
+					   char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n",
+		       channel_latency(hv_dev->channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+static DEVICE_ATTR_RO(client_monitor_latency);
+
+static ssize_t server_monitor_conn_id_show(struct device *dev,
+					   struct device_attribute *dev_attr,
+					   char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n",
+		       channel_conn_id(hv_dev->channel,
+				       vmbus_connection.monitor_pages[0]));
+}
+static DEVICE_ATTR_RO(server_monitor_conn_id);
+
+static ssize_t client_monitor_conn_id_show(struct device *dev,
+					   struct device_attribute *dev_attr,
+					   char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	return sprintf(buf, "%d\n",
+		       channel_conn_id(hv_dev->channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+static DEVICE_ATTR_RO(client_monitor_conn_id);
+
+static ssize_t out_intr_mask_show(struct device *dev,
+				  struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info outbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
+	return sprintf(buf, "%d\n", outbound.current_interrupt_mask);
+}
+static DEVICE_ATTR_RO(out_intr_mask);
+
+static ssize_t out_read_index_show(struct device *dev,
+				   struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info outbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
+	return sprintf(buf, "%d\n", outbound.current_read_index);
+}
+static DEVICE_ATTR_RO(out_read_index);
+
+static ssize_t out_write_index_show(struct device *dev,
+				    struct device_attribute *dev_attr,
+				    char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info outbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
+	return sprintf(buf, "%d\n", outbound.current_write_index);
+}
+static DEVICE_ATTR_RO(out_write_index);
+
+static ssize_t out_read_bytes_avail_show(struct device *dev,
+					 struct device_attribute *dev_attr,
+					 char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info outbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
+	return sprintf(buf, "%d\n", outbound.bytes_avail_toread);
+}
+static DEVICE_ATTR_RO(out_read_bytes_avail);
+
+static ssize_t out_write_bytes_avail_show(struct device *dev,
+					  struct device_attribute *dev_attr,
+					  char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info outbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
+	return sprintf(buf, "%d\n", outbound.bytes_avail_towrite);
+}
+static DEVICE_ATTR_RO(out_write_bytes_avail);
+
+static ssize_t in_intr_mask_show(struct device *dev,
+				 struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info inbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
+	return sprintf(buf, "%d\n", inbound.current_interrupt_mask);
+}
+static DEVICE_ATTR_RO(in_intr_mask);
+
+static ssize_t in_read_index_show(struct device *dev,
+				  struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info inbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
+	return sprintf(buf, "%d\n", inbound.current_read_index);
+}
+static DEVICE_ATTR_RO(in_read_index);
+
+static ssize_t in_write_index_show(struct device *dev,
+				   struct device_attribute *dev_attr, char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info inbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
+	return sprintf(buf, "%d\n", inbound.current_write_index);
+}
+static DEVICE_ATTR_RO(in_write_index);
+
+static ssize_t in_read_bytes_avail_show(struct device *dev,
+					struct device_attribute *dev_attr,
+					char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info inbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
+	return sprintf(buf, "%d\n", inbound.bytes_avail_toread);
+}
+static DEVICE_ATTR_RO(in_read_bytes_avail);
+
+static ssize_t in_write_bytes_avail_show(struct device *dev,
+					 struct device_attribute *dev_attr,
+					 char *buf)
+{
+	struct hv_device *hv_dev = device_to_hv_device(dev);
+	struct hv_ring_buffer_debug_info inbound;
+
+	if (!hv_dev->channel)
+		return -ENODEV;
+	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
+	return sprintf(buf, "%d\n", inbound.bytes_avail_towrite);
+}
+static DEVICE_ATTR_RO(in_write_bytes_avail);
+
 /* Set up per device attributes in /sys/bus/vmbus/devices/<bus device> */
-static struct device_attribute vmbus_device_attrs[] = {
-	__ATTR(id, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(state, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(class_id, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(device_id, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(monitor_id, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(modalias, S_IRUGO, vmbus_show_device_attr, NULL),
-
-	__ATTR(server_monitor_pending, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(server_monitor_latency, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(server_monitor_conn_id, S_IRUGO, vmbus_show_device_attr, NULL),
-
-	__ATTR(client_monitor_pending, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(client_monitor_latency, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(client_monitor_conn_id, S_IRUGO, vmbus_show_device_attr, NULL),
-
-	__ATTR(out_intr_mask, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(out_read_index, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(out_write_index, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(out_read_bytes_avail, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(out_write_bytes_avail, S_IRUGO, vmbus_show_device_attr, NULL),
-
-	__ATTR(in_intr_mask, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(in_read_index, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(in_write_index, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(in_read_bytes_avail, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR(in_write_bytes_avail, S_IRUGO, vmbus_show_device_attr, NULL),
-	__ATTR_NULL
+static struct attribute *vmbus_attrs[] = {
+	&dev_attr_id.attr,
+	&dev_attr_state.attr,
+	&dev_attr_monitor_id.attr,
+	&dev_attr_class_id.attr,
+	&dev_attr_device_id.attr,
+	&dev_attr_modalias.attr,
+	&dev_attr_server_monitor_pending.attr,
+	&dev_attr_client_monitor_pending.attr,
+	&dev_attr_server_monitor_latency.attr,
+	&dev_attr_client_monitor_latency.attr,
+	&dev_attr_server_monitor_conn_id.attr,
+	&dev_attr_client_monitor_conn_id.attr,
+	&dev_attr_out_intr_mask.attr,
+	&dev_attr_out_read_index.attr,
+	&dev_attr_out_write_index.attr,
+	&dev_attr_out_read_bytes_avail.attr,
+	&dev_attr_out_write_bytes_avail.attr,
+	&dev_attr_in_intr_mask.attr,
+	&dev_attr_in_read_index.attr,
+	&dev_attr_in_write_index.attr,
+	&dev_attr_in_read_bytes_avail.attr,
+	&dev_attr_in_write_bytes_avail.attr,
+	NULL,
 };
-
+ATTRIBUTE_GROUPS(vmbus);
 
 /*
  * vmbus_uevent - add uevent for our device
@@ -383,7 +557,7 @@
 	.remove =		vmbus_remove,
 	.probe =		vmbus_probe,
 	.uevent =		vmbus_uevent,
-	.dev_attrs =	vmbus_device_attrs,
+	.dev_groups =		vmbus_groups,
 };
 
 static const char *driver_name = "hyperv";
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 02906ca..3f7f59c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -197,8 +197,8 @@
 
 config IDE_GENERIC
 	tristate "generic/default IDE chipset support"
-	depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK
-	default ARM && (ARCH_RPC || ARCH_SHARK)
+	depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+	default ARM && ARCH_RPC
 	help
 	  This is the generic IDE driver.  This driver attaches to the
 	  fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
diff --git a/drivers/ide/ide-sysfs.c b/drivers/ide/ide-sysfs.c
index 883ffac..84a6a9e 100644
--- a/drivers/ide/ide-sysfs.c
+++ b/drivers/ide/ide-sysfs.c
@@ -25,6 +25,7 @@
 	ide_drive_t *drive = to_ide_device(dev);
 	return sprintf(buf, "%s\n", ide_media_string(drive));
 }
+static DEVICE_ATTR_RO(media);
 
 static ssize_t drivename_show(struct device *dev, struct device_attribute *attr,
 			      char *buf)
@@ -32,6 +33,7 @@
 	ide_drive_t *drive = to_ide_device(dev);
 	return sprintf(buf, "%s\n", drive->name);
 }
+static DEVICE_ATTR_RO(drivename);
 
 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
@@ -39,6 +41,7 @@
 	ide_drive_t *drive = to_ide_device(dev);
 	return sprintf(buf, "ide:m-%s\n", ide_media_string(drive));
 }
+static DEVICE_ATTR_RO(modalias);
 
 static ssize_t model_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
@@ -46,6 +49,7 @@
 	ide_drive_t *drive = to_ide_device(dev);
 	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
 }
+static DEVICE_ATTR_RO(model);
 
 static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
@@ -53,6 +57,7 @@
 	ide_drive_t *drive = to_ide_device(dev);
 	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
 }
+static DEVICE_ATTR_RO(firmware);
 
 static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
 			   char *buf)
@@ -60,16 +65,28 @@
 	ide_drive_t *drive = to_ide_device(dev);
 	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
 }
+static DEVICE_ATTR(serial, 0400, serial_show, NULL);
 
-struct device_attribute ide_dev_attrs[] = {
-	__ATTR_RO(media),
-	__ATTR_RO(drivename),
-	__ATTR_RO(modalias),
-	__ATTR_RO(model),
-	__ATTR_RO(firmware),
-	__ATTR(serial, 0400, serial_show, NULL),
-	__ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
-	__ATTR_NULL
+static DEVICE_ATTR(unload_heads, 0644, ide_park_show, ide_park_store);
+
+static struct attribute *ide_attrs[] = {
+	&dev_attr_media.attr,
+	&dev_attr_drivename.attr,
+	&dev_attr_modalias.attr,
+	&dev_attr_model.attr,
+	&dev_attr_firmware.attr,
+	&dev_attr_serial.attr,
+	&dev_attr_unload_heads.attr,
+	NULL,
+};
+
+static const struct attribute_group ide_attr_group = {
+	.attrs = ide_attrs,
+};
+
+const struct attribute_group *ide_dev_groups[] = {
+	&ide_attr_group,
+	NULL,
 };
 
 static ssize_t store_delete_devices(struct device *portdev,
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index fa89621..2ce6268 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -158,7 +158,7 @@
 	.probe		= generic_ide_probe,
 	.remove		= generic_ide_remove,
 	.shutdown	= generic_ide_shutdown,
-	.dev_attrs	= ide_dev_attrs,
+	.dev_groups	= ide_dev_groups,
 	.suspend	= generic_ide_suspend,
 	.resume		= generic_ide_resume,
 };
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 81e3dc2..28b3928 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -471,13 +471,10 @@
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct bma180_data *data = iio_priv(indio_dev);
+	int64_t time_ns = iio_get_time_ns();
 	int bit, ret, i = 0;
 
 	mutex_lock(&data->mutex);
-	if (indio_dev->scan_timestamp) {
-		ret = indio_dev->scan_bytes / sizeof(s64) - 1;
-		((s64 *)data->buff)[ret] = iio_get_time_ns();
-	}
 
 	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
 			 indio_dev->masklength) {
@@ -490,7 +487,7 @@
 	}
 	mutex_unlock(&data->mutex);
 
-	iio_push_to_buffers(indio_dev, (u8 *)data->buff);
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buff, time_ns);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
 
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 46d22f3..dcda173 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -182,10 +182,11 @@
 };
 
 /* Function to push data to buffer */
-static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
+	int len)
 {
 	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
-	iio_push_to_buffers(indio_dev, (u8 *)data);
+	iio_push_to_buffers(indio_dev, data);
 }
 
 /* Callback handler to send event after all samples are received and captured */
@@ -200,7 +201,7 @@
 				accel_state->common_attributes.data_ready);
 	if (accel_state->common_attributes.data_ready)
 		hid_sensor_push_data(indio_dev,
-				(u8 *)accel_state->accel_val,
+				accel_state->accel_val,
 				sizeof(accel_state->accel_val));
 
 	return 0;
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index 709c132..d72118d 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -222,7 +222,6 @@
 {
 	struct iio_dev *indio_dev;
 	struct kxsd9_state *st;
-	int ret;
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
@@ -244,11 +243,7 @@
 	spi_setup(spi);
 	kxsd9_power_up(st);
 
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		return ret;
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int kxsd9_remove(struct spi_device *spi)
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index d9b3507..a1e642e 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -32,16 +32,7 @@
 
 static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
 {
-	int err;
-
-	err = st_sensors_set_enable(indio_dev, true);
-	if (err < 0)
-		goto st_accel_set_enable_error;
-
-	err = iio_sw_buffer_preenable(indio_dev);
-
-st_accel_set_enable_error:
-	return err;
+	return st_sensors_set_enable(indio_dev, true);
 }
 
 static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 1458343..38caedc 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -452,8 +452,9 @@
 int st_accel_common_probe(struct iio_dev *indio_dev,
 				struct st_sensors_platform_data *plat_data)
 {
-	int err;
 	struct st_sensor_data *adata = iio_priv(indio_dev);
+	int irq = adata->get_irq_data_ready(indio_dev);
+	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &accel_info;
@@ -461,7 +462,7 @@
 	err = st_sensors_check_device_support(indio_dev,
 				ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
 	if (err < 0)
-		goto st_accel_common_probe_error;
+		return err;
 
 	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
 	adata->multiread_bit = adata->sensor->multi_read_bit;
@@ -478,13 +479,13 @@
 
 	err = st_sensors_init_sensor(indio_dev, plat_data);
 	if (err < 0)
-		goto st_accel_common_probe_error;
+		return err;
 
-	if (adata->get_irq_data_ready(indio_dev) > 0) {
-		err = st_accel_allocate_ring(indio_dev);
-		if (err < 0)
-			goto st_accel_common_probe_error;
+	err = st_accel_allocate_ring(indio_dev);
+	if (err < 0)
+		return err;
 
+	if (irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						 ST_ACCEL_TRIGGER_OPS);
 		if (err < 0)
@@ -495,15 +496,14 @@
 	if (err)
 		goto st_accel_device_register_error;
 
-	return err;
+	return 0;
 
 st_accel_device_register_error:
-	if (adata->get_irq_data_ready(indio_dev) > 0)
+	if (irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_accel_probe_trigger_error:
-	if (adata->get_irq_data_ready(indio_dev) > 0)
-		st_accel_deallocate_ring(indio_dev);
-st_accel_common_probe_error:
+	st_accel_deallocate_ring(indio_dev);
+
 	return err;
 }
 EXPORT_SYMBOL(st_accel_common_probe);
@@ -513,10 +513,10 @@
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (adata->get_irq_data_ready(indio_dev) > 0) {
+	if (adata->get_irq_data_ready(indio_dev) > 0)
 		st_sensors_deallocate_trigger(indio_dev);
-		st_accel_deallocate_ring(indio_dev);
-	}
+
+	st_accel_deallocate_ring(indio_dev);
 }
 EXPORT_SYMBOL(st_accel_common_remove);
 
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 09371cb..2209f28 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -145,6 +145,16 @@
 	  This driver can also be built as a module. If so, the module will be
 	  called mcp320x.
 
+config MCP3422
+	tristate "Microchip Technology MCP3422/3/4 driver"
+	depends on I2C
+	help
+	  Say yes here to build support for Microchip Technology's MCP3422,
+	  MCP3423 or MCP3424 analog to digital converters.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called mcp3422.
+
 config NAU7802
 	tristate "Nuvoton NAU7802 ADC driver"
 	depends on I2C
@@ -167,6 +177,8 @@
 config TI_AM335X_ADC
 	tristate "TI's AM335X ADC driver"
 	depends on MFD_TI_AM335X_TSCADC
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
 	help
 	  Say yes here to build support for Texas Instruments ADC
 	  driver which is also a MFD client.
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 33656ef..ba9a10a 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -16,6 +16,7 @@
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
+obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index 371731d..58e9455 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -27,7 +27,7 @@
 struct ad7266_state {
 	struct spi_device	*spi;
 	struct regulator	*reg;
-	unsigned long		vref_uv;
+	unsigned long		vref_mv;
 
 	struct spi_transfer	single_xfer[3];
 	struct spi_message	single_msg;
@@ -61,17 +61,7 @@
 static int ad7266_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7266_state *st = iio_priv(indio_dev);
-	int ret;
-
-	ret = ad7266_wakeup(st);
-	if (ret)
-		return ret;
-
-	ret = iio_sw_buffer_preenable(indio_dev);
-	if (ret)
-		ad7266_powerdown(st);
-
-	return ret;
+	return ad7266_wakeup(st);
 }
 
 static int ad7266_postdisable(struct iio_dev *indio_dev)
@@ -96,9 +86,8 @@
 
 	ret = spi_read(st->spi, st->data, 4);
 	if (ret == 0) {
-		if (indio_dev->scan_timestamp)
-			((s64 *)st->data)[1] = pf->timestamp;
-		iio_push_to_buffers(indio_dev, (u8 *)st->data);
+		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+			    pf->timestamp);
 	}
 
 	iio_trigger_notify_done(indio_dev->trig);
@@ -157,7 +146,7 @@
 	struct iio_chan_spec const *chan, int *val, int *val2, long m)
 {
 	struct ad7266_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
+	unsigned long scale_mv;
 	int ret;
 
 	switch (m) {
@@ -175,16 +164,15 @@
 
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->vref_uv * 100);
+		scale_mv = st->vref_mv;
 		if (st->mode == AD7266_MODE_DIFF)
-			scale_uv *= 2;
+			scale_mv *= 2;
 		if (st->range == AD7266_RANGE_2VREF)
-			scale_uv *= 2;
+			scale_mv *= 2;
 
-		scale_uv >>= chan->scan_type.realbits;
-		*val =  scale_uv / 100000;
-		*val2 = (scale_uv % 100000) * 10;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = scale_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
 		if (st->range == AD7266_RANGE_2VREF &&
 			st->mode != AD7266_MODE_DIFF)
@@ -293,7 +281,7 @@
 	.driver_module = THIS_MODULE,
 };
 
-static unsigned long ad7266_available_scan_masks[] = {
+static const unsigned long ad7266_available_scan_masks[] = {
 	0x003,
 	0x00c,
 	0x030,
@@ -303,14 +291,14 @@
 	0x000,
 };
 
-static unsigned long ad7266_available_scan_masks_diff[] = {
+static const unsigned long ad7266_available_scan_masks_diff[] = {
 	0x003,
 	0x00c,
 	0x030,
 	0x000,
 };
 
-static unsigned long ad7266_available_scan_masks_fixed[] = {
+static const unsigned long ad7266_available_scan_masks_fixed[] = {
 	0x003,
 	0x000,
 };
@@ -318,7 +306,7 @@
 struct ad7266_chan_info {
 	const struct iio_chan_spec *channels;
 	unsigned int num_channels;
-	unsigned long *scan_masks;
+	const unsigned long *scan_masks;
 };
 
 #define AD7266_CHAN_INFO_INDEX(_differential, _signed, _fixed) \
@@ -415,10 +403,10 @@
 		if (ret < 0)
 			goto error_disable_reg;
 
-		st->vref_uv = ret;
+		st->vref_mv = ret / 1000;
 	} else {
 		/* Use internal reference */
-		st->vref_uv = 2500000;
+		st->vref_mv = 2500;
 	}
 
 	if (pdata) {
diff --git a/drivers/iio/adc/ad7298.c b/drivers/iio/adc/ad7298.c
index 85d1481..2a3b65c 100644
--- a/drivers/iio/adc/ad7298.c
+++ b/drivers/iio/adc/ad7298.c
@@ -159,20 +159,14 @@
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad7298_state *st = iio_priv(indio_dev);
-	s64 time_ns = 0;
 	int b_sent;
 
 	b_sent = spi_sync(st->spi, &st->ring_msg);
 	if (b_sent)
 		goto done;
 
-	if (indio_dev->scan_timestamp) {
-		time_ns = iio_get_time_ns();
-		memcpy((u8 *)st->rx_buf + indio_dev->scan_bytes - sizeof(s64),
-			&time_ns, sizeof(time_ns));
-	}
-
-	iio_push_to_buffers(indio_dev, (u8 *)st->rx_buf);
+	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+		iio_get_time_ns());
 
 done:
 	iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 6d2b1d8..d141d45 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -64,19 +64,14 @@
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad7476_state *st = iio_priv(indio_dev);
-	s64 time_ns;
 	int b_sent;
 
 	b_sent = spi_sync(st->spi, &st->msg);
 	if (b_sent < 0)
 		goto done;
 
-	time_ns = iio_get_time_ns();
-
-	if (indio_dev->scan_timestamp)
-		((s64 *)st->data)[1] = time_ns;
-
-	iio_push_to_buffers(indio_dev, st->data);
+	iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+		iio_get_time_ns());
 done:
 	iio_trigger_notify_done(indio_dev->trig);
 
@@ -132,10 +127,9 @@
 		} else {
 			scale_uv = st->chip_info->int_vref_uv;
 		}
-		scale_uv >>= chan->scan_type.realbits;
-		*val =  scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = scale_uv / 1000;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
diff --git a/drivers/iio/adc/ad7791.c b/drivers/iio/adc/ad7791.c
index c202035..c19f8fd 100644
--- a/drivers/iio/adc/ad7791.c
+++ b/drivers/iio/adc/ad7791.c
@@ -202,7 +202,6 @@
 {
 	struct ad7791_state *st = iio_priv(indio_dev);
 	bool unipolar = !!(st->mode & AD7791_MODE_UNIPOLAR);
-	unsigned long long scale_pv;
 
 	switch (info) {
 	case IIO_CHAN_INFO_RAW:
@@ -220,23 +219,26 @@
 	case IIO_CHAN_INFO_SCALE:
 		/* The monitor channel uses an internal reference. */
 		if (chan->address == AD7791_CH_AVDD_MONITOR) {
-			scale_pv = 5850000000000ULL;
+			/*
+			 * The signal is attenuated by a factor of 5 and
+			 * compared against a 1.17V internal reference.
+			 */
+			*val = 1170 * 5;
 		} else {
 			int voltage_uv;
 
 			voltage_uv = regulator_get_voltage(st->reg);
 			if (voltage_uv < 0)
 				return voltage_uv;
-			scale_pv = (unsigned long long)voltage_uv * 1000000;
+
+			*val = voltage_uv / 1000;
 		}
 		if (unipolar)
-			scale_pv >>= chan->scan_type.realbits;
+			*val2 = chan->scan_type.realbits;
 		else
-			scale_pv >>= chan->scan_type.realbits - 1;
-		*val2 = do_div(scale_pv, 1000000000);
-		*val = scale_pv;
+			*val2 = chan->scan_type.realbits - 1;
 
-		return IIO_VAL_INT_PLUS_NANO;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 
 	return -EINVAL;
diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
index 9dd077b..acb7f90 100644
--- a/drivers/iio/adc/ad7887.c
+++ b/drivers/iio/adc/ad7887.c
@@ -78,11 +78,6 @@
 static int ad7887_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7887_state *st = iio_priv(indio_dev);
-	int ret;
-
-	ret = iio_sw_buffer_preenable(indio_dev);
-	if (ret < 0)
-		return ret;
 
 	/* We know this is a single long so can 'cheat' */
 	switch (*indio_dev->active_scan_mask) {
@@ -121,20 +116,14 @@
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad7887_state *st = iio_priv(indio_dev);
-	s64 time_ns;
 	int b_sent;
 
 	b_sent = spi_sync(st->spi, st->ring_msg);
 	if (b_sent)
 		goto done;
 
-	time_ns = iio_get_time_ns();
-
-	if (indio_dev->scan_timestamp)
-		memcpy(st->data + indio_dev->scan_bytes - sizeof(s64),
-		       &time_ns, sizeof(time_ns));
-
-	iio_push_to_buffers(indio_dev, st->data);
+	iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+		iio_get_time_ns());
 done:
 	iio_trigger_notify_done(indio_dev->trig);
 
diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
index 4108dbb..28732c2 100644
--- a/drivers/iio/adc/ad7923.c
+++ b/drivers/iio/adc/ad7923.c
@@ -174,20 +174,14 @@
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad7923_state *st = iio_priv(indio_dev);
-	s64 time_ns = 0;
 	int b_sent;
 
 	b_sent = spi_sync(st->spi, &st->ring_msg);
 	if (b_sent)
 		goto done;
 
-	if (indio_dev->scan_timestamp) {
-		time_ns = iio_get_time_ns();
-		memcpy((u8 *)st->rx_buf + indio_dev->scan_bytes - sizeof(s64),
-			&time_ns, sizeof(time_ns));
-	}
-
-	iio_push_to_buffers(indio_dev, (u8 *)st->rx_buf);
+	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+		iio_get_time_ns());
 
 done:
 	iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index f0d6335..e6fbd3e 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -368,10 +368,6 @@
 
 	memset(data, 0x00, 16);
 
-	/* Guaranteed to be aligned with 8 byte boundary */
-	if (indio_dev->scan_timestamp)
-		((s64 *)data)[1] = pf->timestamp;
-
 	reg_size = indio_dev->channels[0].scan_type.realbits +
 			indio_dev->channels[0].scan_type.shift;
 	reg_size = DIV_ROUND_UP(reg_size, 8);
@@ -391,7 +387,7 @@
 		break;
 	}
 
-	iio_push_to_buffers(indio_dev, (uint8_t *)data);
+	iio_push_to_buffers_with_timestamp(indio_dev, data, pf->timestamp);
 
 	iio_trigger_notify_done(indio_dev->trig);
 	sigma_delta->irq_dis = false;
@@ -401,7 +397,6 @@
 }
 
 static const struct iio_buffer_setup_ops ad_sd_buffer_setup_ops = {
-	.preenable = &iio_sw_buffer_preenable,
 	.postenable = &ad_sd_buffer_postenable,
 	.predisable = &iio_triggered_buffer_predisable,
 	.postdisable = &ad_sd_buffer_postdisable,
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 0f16b55..17df749 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -11,6 +11,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
@@ -39,10 +40,36 @@
 #define at91_adc_writel(st, reg, val) \
 	(writel_relaxed(val, st->reg_base + reg))
 
+#define DRIVER_NAME		"at91_adc"
+#define MAX_POS_BITS		12
+
+#define TOUCH_SAMPLE_PERIOD_US		2000	/* 2ms */
+#define TOUCH_PEN_DETECT_DEBOUNCE_US	200
+
 struct at91_adc_caps {
+	bool	has_ts;		/* Support touch screen */
+	bool	has_tsmr;	/* only at91sam9x5, sama5d3 have TSMR reg */
+	/*
+	 * Numbers of sampling data will be averaged. Can be 0~3.
+	 * Hardware can average (2 ^ ts_filter_average) sample data.
+	 */
+	u8	ts_filter_average;
+	/* Pen Detection input pull-up resistor, can be 0~3 */
+	u8	ts_pen_detect_sensitivity;
+
+	/* startup time calculate function */
+	u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
+
+	u8	num_channels;
 	struct at91_adc_reg_desc registers;
 };
 
+enum atmel_adc_ts_type {
+	ATMEL_ADC_TOUCHSCREEN_NONE = 0,
+	ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
+	ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
+};
+
 struct at91_adc_state {
 	struct clk		*adc_clk;
 	u16			*buffer;
@@ -67,6 +94,26 @@
 	bool			low_res;	/* the resolution corresponds to the lowest one */
 	wait_queue_head_t	wq_data_avail;
 	struct at91_adc_caps	*caps;
+
+	/*
+	 * Following ADC channels are shared by touchscreen:
+	 *
+	 * CH0 -- Touch screen XP/UL
+	 * CH1 -- Touch screen XM/UR
+	 * CH2 -- Touch screen YP/LL
+	 * CH3 -- Touch screen YM/Sense
+	 * CH4 -- Touch screen LR(5-wire only)
+	 *
+	 * The bitfields below represents the reserved channel in the
+	 * touchscreen mode.
+	 */
+#define CHAN_MASK_TOUCHSCREEN_4WIRE	(0xf << 0)
+#define CHAN_MASK_TOUCHSCREEN_5WIRE	(0x1f << 0)
+	enum atmel_adc_ts_type	touchscreen_type;
+	struct input_dev	*ts_input;
+
+	u16			ts_sample_period_val;
+	u32			ts_pressure_threshold;
 };
 
 static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
@@ -83,13 +130,7 @@
 		j++;
 	}
 
-	if (idev->scan_timestamp) {
-		s64 *timestamp = (s64 *)((u8 *)st->buffer +
-					ALIGN(j, sizeof(s64)));
-		*timestamp = pf->timestamp;
-	}
-
-	iio_push_to_buffers(idev, (u8 *)st->buffer);
+	iio_push_to_buffers_with_timestamp(idev, st->buffer, pf->timestamp);
 
 	iio_trigger_notify_done(idev->trig);
 
@@ -101,14 +142,10 @@
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t at91_adc_eoc_trigger(int irq, void *private)
+/* Handler for classic adc channel eoc trigger */
+void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
 {
-	struct iio_dev *idev = private;
 	struct at91_adc_state *st = iio_priv(idev);
-	u32 status = at91_adc_readl(st, st->registers->status_register);
-
-	if (!(status & st->registers->drdy_mask))
-		return IRQ_HANDLED;
 
 	if (iio_buffer_enabled(idev)) {
 		disable_irq_nosync(irq);
@@ -118,6 +155,115 @@
 		st->done = true;
 		wake_up_interruptible(&st->wq_data_avail);
 	}
+}
+
+static int at91_ts_sample(struct at91_adc_state *st)
+{
+	unsigned int xscale, yscale, reg, z1, z2;
+	unsigned int x, y, pres, xpos, ypos;
+	unsigned int rxp = 1;
+	unsigned int factor = 1000;
+	struct iio_dev *idev = iio_priv_to_dev(st);
+
+	unsigned int xyz_mask_bits = st->res;
+	unsigned int xyz_mask = (1 << xyz_mask_bits) - 1;
+
+	/* calculate position */
+	/* x position = (x / xscale) * max, max = 2^MAX_POS_BITS - 1 */
+	reg = at91_adc_readl(st, AT91_ADC_TSXPOSR);
+	xpos = reg & xyz_mask;
+	x = (xpos << MAX_POS_BITS) - xpos;
+	xscale = (reg >> 16) & xyz_mask;
+	if (xscale == 0) {
+		dev_err(&idev->dev, "Error: xscale == 0!\n");
+		return -1;
+	}
+	x /= xscale;
+
+	/* y position = (y / yscale) * max, max = 2^MAX_POS_BITS - 1 */
+	reg = at91_adc_readl(st, AT91_ADC_TSYPOSR);
+	ypos = reg & xyz_mask;
+	y = (ypos << MAX_POS_BITS) - ypos;
+	yscale = (reg >> 16) & xyz_mask;
+	if (yscale == 0) {
+		dev_err(&idev->dev, "Error: yscale == 0!\n");
+		return -1;
+	}
+	y /= yscale;
+
+	/* calculate the pressure */
+	reg = at91_adc_readl(st, AT91_ADC_TSPRESSR);
+	z1 = reg & xyz_mask;
+	z2 = (reg >> 16) & xyz_mask;
+
+	if (z1 != 0)
+		pres = rxp * (x * factor / 1024) * (z2 * factor / z1 - factor)
+			/ factor;
+	else
+		pres = st->ts_pressure_threshold;	/* no pen contacted */
+
+	dev_dbg(&idev->dev, "xpos = %d, xscale = %d, ypos = %d, yscale = %d, z1 = %d, z2 = %d, press = %d\n",
+				xpos, xscale, ypos, yscale, z1, z2, pres);
+
+	if (pres < st->ts_pressure_threshold) {
+		dev_dbg(&idev->dev, "x = %d, y = %d, pressure = %d\n",
+					x, y, pres / factor);
+		input_report_abs(st->ts_input, ABS_X, x);
+		input_report_abs(st->ts_input, ABS_Y, y);
+		input_report_abs(st->ts_input, ABS_PRESSURE, pres);
+		input_report_key(st->ts_input, BTN_TOUCH, 1);
+		input_sync(st->ts_input);
+	} else {
+		dev_dbg(&idev->dev, "pressure too low: not reporting\n");
+	}
+
+	return 0;
+}
+
+static irqreturn_t at91_adc_interrupt(int irq, void *private)
+{
+	struct iio_dev *idev = private;
+	struct at91_adc_state *st = iio_priv(idev);
+	u32 status = at91_adc_readl(st, st->registers->status_register);
+	const uint32_t ts_data_irq_mask =
+		AT91_ADC_IER_XRDY |
+		AT91_ADC_IER_YRDY |
+		AT91_ADC_IER_PRDY;
+
+	if (status & st->registers->drdy_mask)
+		handle_adc_eoc_trigger(irq, idev);
+
+	if (status & AT91_ADC_IER_PEN) {
+		at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+		at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_NOPEN |
+			ts_data_irq_mask);
+		/* Set up period trigger for sampling */
+		at91_adc_writel(st, st->registers->trigger_register,
+			AT91_ADC_TRGR_MOD_PERIOD_TRIG |
+			AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val));
+	} else if (status & AT91_ADC_IER_NOPEN) {
+		at91_adc_writel(st, st->registers->trigger_register, 0);
+		at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_NOPEN |
+			ts_data_irq_mask);
+		at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+
+		input_report_key(st->ts_input, BTN_TOUCH, 0);
+		input_sync(st->ts_input);
+	} else if ((status & ts_data_irq_mask) == ts_data_irq_mask) {
+		/* Now all touchscreen data is ready */
+
+		if (status & AT91_ADC_ISR_PENS) {
+			/* validate data by pen contact */
+			at91_ts_sample(st);
+		} else {
+			/* triggered by event that is no pen contact, just read
+			 * them to clean the interrupt and discard all.
+			 */
+			at91_adc_readl(st, AT91_ADC_TSXPOSR);
+			at91_adc_readl(st, AT91_ADC_TSYPOSR);
+			at91_adc_readl(st, AT91_ADC_TSPRESSR);
+		}
+	}
 
 	return IRQ_HANDLED;
 }
@@ -127,6 +273,16 @@
 	struct at91_adc_state *st = iio_priv(idev);
 	struct iio_chan_spec *chan_array, *timestamp;
 	int bit, idx = 0;
+	unsigned long rsvd_mask = 0;
+
+	/* If touchscreen is enable, then reserve the adc channels */
+	if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
+		rsvd_mask = CHAN_MASK_TOUCHSCREEN_4WIRE;
+	else if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_5WIRE)
+		rsvd_mask = CHAN_MASK_TOUCHSCREEN_5WIRE;
+
+	/* set up the channel mask to reserve touchscreen channels */
+	st->channels_mask &= ~rsvd_mask;
 
 	idev->num_channels = bitmap_weight(&st->channels_mask,
 					   st->num_channels) + 1;
@@ -279,7 +435,7 @@
 	int i, ret;
 
 	st->trig = devm_kzalloc(&idev->dev,
-				st->trigger_number * sizeof(st->trig),
+				st->trigger_number * sizeof(*st->trig),
 				GFP_KERNEL);
 
 	if (st->trig == NULL) {
@@ -372,9 +528,9 @@
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
-		*val = (st->vref_mv * 1000) >> chan->scan_type.realbits;
-		*val2 = 0;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = st->vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	default:
 		break;
 	}
@@ -434,8 +590,80 @@
 	return ret;
 }
 
+static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz)
+{
+	/*
+	 * Number of ticks needed to cover the startup time of the ADC
+	 * as defined in the electrical characteristics of the board,
+	 * divided by 8. The formula thus is :
+	 *   Startup Time = (ticks + 1) * 8 / ADC Clock
+	 */
+	return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8;
+}
+
+static u32 calc_startup_ticks_9x5(u8 startup_time, u32 adc_clk_khz)
+{
+	/*
+	 * For sama5d3x and at91sam9x5, the formula changes to:
+	 * Startup Time = <lookup_table_value> / ADC Clock
+	 */
+	const int startup_lookup[] = {
+		0  , 8  , 16 , 24 ,
+		64 , 80 , 96 , 112,
+		512, 576, 640, 704,
+		768, 832, 896, 960
+		};
+	int i, size = ARRAY_SIZE(startup_lookup);
+	unsigned int ticks;
+
+	ticks = startup_time * adc_clk_khz / 1000;
+	for (i = 0; i < size; i++)
+		if (ticks < startup_lookup[i])
+			break;
+
+	ticks = i;
+	if (ticks == size)
+		/* Reach the end of lookup table */
+		ticks = size - 1;
+
+	return ticks;
+}
+
 static const struct of_device_id at91_adc_dt_ids[];
 
+static int at91_adc_probe_dt_ts(struct device_node *node,
+	struct at91_adc_state *st, struct device *dev)
+{
+	int ret;
+	u32 prop;
+
+	ret = of_property_read_u32(node, "atmel,adc-ts-wires", &prop);
+	if (ret) {
+		dev_info(dev, "ADC Touch screen is disabled.\n");
+		return 0;
+	}
+
+	switch (prop) {
+	case 4:
+	case 5:
+		st->touchscreen_type = prop;
+		break;
+	default:
+		dev_err(dev, "Unsupported number of touchscreen wires (%d). Should be 4 or 5.\n", prop);
+		return -EINVAL;
+	}
+
+	prop = 0;
+	of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop);
+	st->ts_pressure_threshold = prop;
+	if (st->ts_pressure_threshold) {
+		return 0;
+	} else {
+		dev_err(dev, "Invalid pressure threshold for the touchscreen\n");
+		return -EINVAL;
+	}
+}
+
 static int at91_adc_probe_dt(struct at91_adc_state *st,
 			     struct platform_device *pdev)
 {
@@ -460,13 +688,6 @@
 	}
 	st->channels_mask = prop;
 
-	if (of_property_read_u32(node, "atmel,adc-num-channels", &prop)) {
-		dev_err(&idev->dev, "Missing adc-num-channels property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	st->num_channels = prop;
-
 	st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
 
 	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
@@ -492,6 +713,7 @@
 		goto error_ret;
 
 	st->registers = &st->caps->registers;
+	st->num_channels = st->caps->num_channels;
 	st->trigger_number = of_get_child_count(node);
 	st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number *
 					sizeof(struct at91_adc_trigger),
@@ -523,6 +745,12 @@
 		i++;
 	}
 
+	/* Check if touchscreen is supported. */
+	if (st->caps->has_ts)
+		return at91_adc_probe_dt_ts(node, st, &idev->dev);
+	else
+		dev_info(&idev->dev, "not support touchscreen in the adc compatible string.\n");
+
 	return 0;
 
 error_ret:
@@ -554,6 +782,114 @@
 	.read_raw = &at91_adc_read_raw,
 };
 
+/* Touchscreen related functions */
+static int atmel_ts_open(struct input_dev *dev)
+{
+	struct at91_adc_state *st = input_get_drvdata(dev);
+
+	at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+	return 0;
+}
+
+static void atmel_ts_close(struct input_dev *dev)
+{
+	struct at91_adc_state *st = input_get_drvdata(dev);
+
+	at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+}
+
+static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
+{
+	u32 reg = 0, pendbc;
+	int i = 0;
+
+	if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
+		reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
+	else
+		reg = AT91_ADC_TSMR_TSMODE_5WIRE;
+
+	/* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid
+	 * pen detect noise.
+	 * The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock
+	 */
+	pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1000, 1);
+
+	while (pendbc >> ++i)
+		;	/* Empty! Find the shift offset */
+	if (abs(pendbc - (1 << i)) < abs(pendbc - (1 << (i - 1))))
+		pendbc = i;
+	else
+		pendbc = i - 1;
+
+	if (st->caps->has_tsmr) {
+		reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
+				& AT91_ADC_TSMR_TSAV;
+		reg |= AT91_ADC_TSMR_PENDBC_(pendbc) & AT91_ADC_TSMR_PENDBC;
+		reg |= AT91_ADC_TSMR_NOTSDMA;
+		reg |= AT91_ADC_TSMR_PENDET_ENA;
+		reg |= 0x03 << 8;	/* TSFREQ, need bigger than TSAV */
+
+		at91_adc_writel(st, AT91_ADC_TSMR, reg);
+	} else {
+		/* TODO: for 9g45 which has no TSMR */
+	}
+
+	/* Change adc internal resistor value for better pen detection,
+	 * default value is 100 kOhm.
+	 * 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm
+	 * option only available on ES2 and higher
+	 */
+	at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity
+			& AT91_ADC_ACR_PENDETSENS);
+
+	/* Sample Peroid Time = (TRGPER + 1) / ADCClock */
+	st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US *
+			adc_clk_khz / 1000) - 1, 1);
+
+	return 0;
+}
+
+static int at91_ts_register(struct at91_adc_state *st,
+		struct platform_device *pdev)
+{
+	struct input_dev *input;
+	struct iio_dev *idev = iio_priv_to_dev(st);
+	int ret;
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(&idev->dev, "Failed to allocate TS device!\n");
+		return -ENOMEM;
+	}
+
+	input->name = DRIVER_NAME;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = &pdev->dev;
+	input->open = atmel_ts_open;
+	input->close = atmel_ts_close;
+
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_TOUCH, input->keybit);
+	input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+
+	st->ts_input = input;
+	input_set_drvdata(input, st);
+
+	ret = input_register_device(input);
+	if (ret)
+		input_free_device(st->ts_input);
+
+	return ret;
+}
+
+static void at91_ts_unregister(struct at91_adc_state *st)
+{
+	input_unregister_device(st->ts_input);
+}
+
 static int at91_adc_probe(struct platform_device *pdev)
 {
 	unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim;
@@ -605,7 +941,7 @@
 	at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST);
 	at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF);
 	ret = request_irq(st->irq,
-			  at91_adc_eoc_trigger,
+			  at91_adc_interrupt,
 			  0,
 			  pdev->dev.driver->name,
 			  idev);
@@ -650,6 +986,10 @@
 	mstrclk = clk_get_rate(st->clk);
 	adc_clk = clk_get_rate(st->adc_clk);
 	adc_clk_khz = adc_clk / 1000;
+
+	dev_dbg(&pdev->dev, "Master clock is set as: %d Hz, adc_clk should set as: %d Hz\n",
+		mstrclk, adc_clk);
+
 	prsc = (mstrclk / (2 * adc_clk)) - 1;
 
 	if (!st->startup_time) {
@@ -657,15 +997,9 @@
 		ret = -EINVAL;
 		goto error_disable_adc_clk;
 	}
+	ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz);
 
 	/*
-	 * Number of ticks needed to cover the startup time of the ADC as
-	 * defined in the electrical characteristics of the board, divided by 8.
-	 * The formula thus is : Startup Time = (ticks + 1) * 8 / ADC Clock
-	 */
-	ticks = round_up((st->startup_time * adc_clk_khz /
-			  1000) - 1, 8) / 8;
-	/*
 	 * a minimal Sample and Hold Time is necessary for the ADC to guarantee
 	 * the best converted final value between two channels selection
 	 * The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock
@@ -692,30 +1026,52 @@
 	init_waitqueue_head(&st->wq_data_avail);
 	mutex_init(&st->lock);
 
-	ret = at91_adc_buffer_init(idev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
-		goto error_disable_adc_clk;
-	}
+	/*
+	 * Since touch screen will set trigger register as period trigger. So
+	 * when touch screen is enabled, then we have to disable hardware
+	 * trigger for classic adc.
+	 */
+	if (!st->touchscreen_type) {
+		ret = at91_adc_buffer_init(idev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
+			goto error_disable_adc_clk;
+		}
 
-	ret = at91_adc_trigger_init(idev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Couldn't setup the triggers.\n");
-		goto error_unregister_buffer;
+		ret = at91_adc_trigger_init(idev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Couldn't setup the triggers.\n");
+			at91_adc_buffer_remove(idev);
+			goto error_disable_adc_clk;
+		}
+	} else {
+		if (!st->caps->has_tsmr) {
+			dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
+			goto error_disable_adc_clk;
+		}
+
+		ret = at91_ts_register(st, pdev);
+		if (ret)
+			goto error_disable_adc_clk;
+
+		at91_ts_hw_init(st, adc_clk_khz);
 	}
 
 	ret = iio_device_register(idev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Couldn't register the device.\n");
-		goto error_remove_triggers;
+		goto error_iio_device_register;
 	}
 
 	return 0;
 
-error_remove_triggers:
-	at91_adc_trigger_remove(idev);
-error_unregister_buffer:
-	at91_adc_buffer_remove(idev);
+error_iio_device_register:
+	if (!st->touchscreen_type) {
+		at91_adc_trigger_remove(idev);
+		at91_adc_buffer_remove(idev);
+	} else {
+		at91_ts_unregister(st);
+	}
 error_disable_adc_clk:
 	clk_disable_unprepare(st->adc_clk);
 error_disable_clk:
@@ -731,8 +1087,12 @@
 	struct at91_adc_state *st = iio_priv(idev);
 
 	iio_device_unregister(idev);
-	at91_adc_trigger_remove(idev);
-	at91_adc_buffer_remove(idev);
+	if (!st->touchscreen_type) {
+		at91_adc_trigger_remove(idev);
+		at91_adc_buffer_remove(idev);
+	} else {
+		at91_ts_unregister(st);
+	}
 	clk_disable_unprepare(st->adc_clk);
 	clk_disable_unprepare(st->clk);
 	free_irq(st->irq, idev);
@@ -742,6 +1102,8 @@
 
 #ifdef CONFIG_OF
 static struct at91_adc_caps at91sam9260_caps = {
+	.calc_startup_ticks = calc_startup_ticks_9260,
+	.num_channels = 4,
 	.registers = {
 		.channel_base = AT91_ADC_CHR(0),
 		.drdy_mask = AT91_ADC_DRDY,
@@ -753,6 +1115,9 @@
 };
 
 static struct at91_adc_caps at91sam9g45_caps = {
+	.has_ts = true,
+	.calc_startup_ticks = calc_startup_ticks_9260,	/* same as 9260 */
+	.num_channels = 8,
 	.registers = {
 		.channel_base = AT91_ADC_CHR(0),
 		.drdy_mask = AT91_ADC_DRDY,
@@ -764,6 +1129,12 @@
 };
 
 static struct at91_adc_caps at91sam9x5_caps = {
+	.has_ts = true,
+	.has_tsmr = true,
+	.ts_filter_average = 3,
+	.ts_pen_detect_sensitivity = 2,
+	.calc_startup_ticks = calc_startup_ticks_9x5,
+	.num_channels = 12,
 	.registers = {
 		.channel_base = AT91_ADC_CDR0_9X5,
 		.drdy_mask = AT91_ADC_SR_DRDY_9X5,
@@ -788,7 +1159,7 @@
 	.probe = at91_adc_probe,
 	.remove = at91_adc_remove,
 	.driver = {
-		   .name = "at91_adc",
+		   .name = DRIVER_NAME,
 		   .of_match_table = of_match_ptr(at91_adc_dt_ids),
 	},
 };
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 4fb35d1..6118dce 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -165,6 +165,8 @@
  * @thresh_low:		low threshold values
  * @vref:		Reference voltage regulator
  * @vref_uv:		Actual (external or internal) reference voltage
+ * @send:		function used to send data to the chip
+ * @recv:		function used to receive data from the chip
  */
 struct max1363_state {
 	struct i2c_client		*client;
@@ -186,6 +188,10 @@
 	s16				thresh_low[8];
 	struct regulator		*vref;
 	u32				vref_uv;
+	int				(*send)(const struct i2c_client *client,
+						const char *buf, int count);
+	int				(*recv)(const struct i2c_client *client,
+						char *buf, int count);
 };
 
 #define MAX1363_MODE_SINGLE(_num, _mask) {				\
@@ -311,13 +317,37 @@
 	return NULL;
 }
 
-static int max1363_write_basic_config(struct i2c_client *client,
-				      unsigned char d1,
-				      unsigned char d2)
+static int max1363_smbus_send(const struct i2c_client *client, const char *buf,
+		int count)
 {
-	u8 tx_buf[2] = {d1, d2};
+	int i, err;
 
-	return i2c_master_send(client, tx_buf, 2);
+	for (i = err = 0; err == 0 && i < count; ++i)
+		err = i2c_smbus_write_byte(client, buf[i]);
+
+	return err ? err : count;
+}
+
+static int max1363_smbus_recv(const struct i2c_client *client, char *buf,
+		int count)
+{
+	int i, ret;
+
+	for (i = 0; i < count; ++i) {
+		ret = i2c_smbus_read_byte(client);
+		if (ret < 0)
+			return ret;
+		buf[i] = ret;
+	}
+
+	return count;
+}
+
+static int max1363_write_basic_config(struct max1363_state *st)
+{
+	u8 tx_buf[2] = { st->setupbyte, st->configbyte };
+
+	return st->send(st->client, tx_buf, 2);
 }
 
 static int max1363_set_scan_mode(struct max1363_state *st)
@@ -327,9 +357,7 @@
 			    | MAX1363_SE_DE_MASK);
 	st->configbyte |= st->current_mode->conf;
 
-	return max1363_write_basic_config(st->client,
-					  st->setupbyte,
-					  st->configbyte);
+	return max1363_write_basic_config(st);
 }
 
 static int max1363_read_single_chan(struct iio_dev *indio_dev,
@@ -366,7 +394,7 @@
 	}
 	if (st->chip_info->bits != 8) {
 		/* Get reading */
-		data = i2c_master_recv(client, rxbuf, 2);
+		data = st->recv(client, rxbuf, 2);
 		if (data < 0) {
 			ret = data;
 			goto error_ret;
@@ -375,7 +403,7 @@
 		  ((1 << st->chip_info->bits) - 1);
 	} else {
 		/* Get reading */
-		data = i2c_master_recv(client, rxbuf, 1);
+		data = st->recv(client, rxbuf, 1);
 		if (data < 0) {
 			ret = data;
 			goto error_ret;
@@ -397,7 +425,6 @@
 {
 	struct max1363_state *st = iio_priv(indio_dev);
 	int ret;
-	unsigned long scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -406,10 +433,9 @@
 			return ret;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = st->vref_uv >> st->chip_info->bits;
-		*val = scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = st->vref_uv / 1000;
+		*val2 = st->chip_info->bits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	default:
 		return -EINVAL;
 	}
@@ -424,11 +450,21 @@
 	d0m1to2m3, d1m0to3m2,
 };
 
-#define MAX1363_EV_M						\
-	(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)	\
-	 | IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
+static const struct iio_event_spec max1363_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
 
-#define MAX1363_CHAN_U(num, addr, si, bits, evmask)			\
+#define MAX1363_CHAN_U(num, addr, si, bits, ev_spec, num_ev_spec)	\
 	{								\
 		.type = IIO_VOLTAGE,					\
 		.indexed = 1,						\
@@ -444,11 +480,12 @@
 			.endianness = IIO_BE,				\
 		},							\
 		.scan_index = si,					\
-		.event_mask = evmask,					\
+		.event_spec = ev_spec,					\
+		.num_event_specs = num_ev_spec,				\
 	}
 
 /* bipolar channel */
-#define MAX1363_CHAN_B(num, num2, addr, si, bits, evmask)		\
+#define MAX1363_CHAN_B(num, num2, addr, si, bits, ev_spec, num_ev_spec)	\
 	{								\
 		.type = IIO_VOLTAGE,					\
 		.differential = 1,					\
@@ -466,28 +503,32 @@
 			.endianness = IIO_BE,				\
 		},							\
 		.scan_index = si,					\
-		.event_mask = evmask,					\
+		.event_spec = ev_spec,					\
+		.num_event_specs = num_ev_spec,				\
 	}
 
-#define MAX1363_4X_CHANS(bits, em) {			\
-	MAX1363_CHAN_U(0, _s0, 0, bits, em),		\
-	MAX1363_CHAN_U(1, _s1, 1, bits, em),		\
-	MAX1363_CHAN_U(2, _s2, 2, bits, em),		\
-	MAX1363_CHAN_U(3, _s3, 3, bits, em),		\
-	MAX1363_CHAN_B(0, 1, d0m1, 4, bits, em),	\
-	MAX1363_CHAN_B(2, 3, d2m3, 5, bits, em),	\
-	MAX1363_CHAN_B(1, 0, d1m0, 6, bits, em),	\
-	MAX1363_CHAN_B(3, 2, d3m2, 7, bits, em),	\
-	IIO_CHAN_SOFT_TIMESTAMP(8)			\
+#define MAX1363_4X_CHANS(bits, ev_spec, num_ev_spec) {			\
+	MAX1363_CHAN_U(0, _s0, 0, bits, ev_spec, num_ev_spec),		\
+	MAX1363_CHAN_U(1, _s1, 1, bits, ev_spec, num_ev_spec),		\
+	MAX1363_CHAN_U(2, _s2, 2, bits, ev_spec, num_ev_spec),		\
+	MAX1363_CHAN_U(3, _s3, 3, bits, ev_spec, num_ev_spec),		\
+	MAX1363_CHAN_B(0, 1, d0m1, 4, bits, ev_spec, num_ev_spec),	\
+	MAX1363_CHAN_B(2, 3, d2m3, 5, bits, ev_spec, num_ev_spec),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 6, bits, ev_spec, num_ev_spec),	\
+	MAX1363_CHAN_B(3, 2, d3m2, 7, bits, ev_spec, num_ev_spec),	\
+	IIO_CHAN_SOFT_TIMESTAMP(8)					\
 	}
 
-static const struct iio_chan_spec max1036_channels[] = MAX1363_4X_CHANS(8, 0);
-static const struct iio_chan_spec max1136_channels[] = MAX1363_4X_CHANS(10, 0);
-static const struct iio_chan_spec max1236_channels[] = MAX1363_4X_CHANS(12, 0);
+static const struct iio_chan_spec max1036_channels[] =
+	MAX1363_4X_CHANS(8, NULL, 0);
+static const struct iio_chan_spec max1136_channels[] =
+	MAX1363_4X_CHANS(10, NULL, 0);
+static const struct iio_chan_spec max1236_channels[] =
+	MAX1363_4X_CHANS(12, NULL, 0);
 static const struct iio_chan_spec max1361_channels[] =
-	MAX1363_4X_CHANS(10, MAX1363_EV_M);
+	MAX1363_4X_CHANS(10, max1363_events, ARRAY_SIZE(max1363_events));
 static const struct iio_chan_spec max1363_channels[] =
-	MAX1363_4X_CHANS(12, MAX1363_EV_M);
+	MAX1363_4X_CHANS(12, max1363_events, ARRAY_SIZE(max1363_events));
 
 /* Applies to max1236, max1237 */
 static const enum max1363_modes max1236_mode_list[] = {
@@ -511,32 +552,32 @@
 	d6m7to8m9, d6m7to10m11, d7m6to9m8, d7m6to11m10,
 };
 
-#define MAX1363_12X_CHANS(bits) {			\
-	MAX1363_CHAN_U(0, _s0, 0, bits, 0),		\
-	MAX1363_CHAN_U(1, _s1, 1, bits, 0),		\
-	MAX1363_CHAN_U(2, _s2, 2, bits, 0),		\
-	MAX1363_CHAN_U(3, _s3, 3, bits, 0),		\
-	MAX1363_CHAN_U(4, _s4, 4, bits, 0),		\
-	MAX1363_CHAN_U(5, _s5, 5, bits, 0),		\
-	MAX1363_CHAN_U(6, _s6, 6, bits, 0),		\
-	MAX1363_CHAN_U(7, _s7, 7, bits, 0),		\
-	MAX1363_CHAN_U(8, _s8, 8, bits, 0),		\
-	MAX1363_CHAN_U(9, _s9, 9, bits, 0),		\
-	MAX1363_CHAN_U(10, _s10, 10, bits, 0),		\
-	MAX1363_CHAN_U(11, _s11, 11, bits, 0),		\
-	MAX1363_CHAN_B(0, 1, d0m1, 12, bits, 0),	\
-	MAX1363_CHAN_B(2, 3, d2m3, 13, bits, 0),	\
-	MAX1363_CHAN_B(4, 5, d4m5, 14, bits, 0),	\
-	MAX1363_CHAN_B(6, 7, d6m7, 15, bits, 0),	\
-	MAX1363_CHAN_B(8, 9, d8m9, 16, bits, 0),	\
-	MAX1363_CHAN_B(10, 11, d10m11, 17, bits, 0),	\
-	MAX1363_CHAN_B(1, 0, d1m0, 18, bits, 0),	\
-	MAX1363_CHAN_B(3, 2, d3m2, 19, bits, 0),	\
-	MAX1363_CHAN_B(5, 4, d5m4, 20, bits, 0),	\
-	MAX1363_CHAN_B(7, 6, d7m6, 21, bits, 0),	\
-	MAX1363_CHAN_B(9, 8, d9m8, 22, bits, 0),	\
-	MAX1363_CHAN_B(11, 10, d11m10, 23, bits, 0),	\
-	IIO_CHAN_SOFT_TIMESTAMP(24)			\
+#define MAX1363_12X_CHANS(bits) {				\
+	MAX1363_CHAN_U(0, _s0, 0, bits, NULL, 0),		\
+	MAX1363_CHAN_U(1, _s1, 1, bits, NULL, 0),		\
+	MAX1363_CHAN_U(2, _s2, 2, bits, NULL, 0),		\
+	MAX1363_CHAN_U(3, _s3, 3, bits, NULL, 0),		\
+	MAX1363_CHAN_U(4, _s4, 4, bits, NULL, 0),		\
+	MAX1363_CHAN_U(5, _s5, 5, bits, NULL, 0),		\
+	MAX1363_CHAN_U(6, _s6, 6, bits, NULL, 0),		\
+	MAX1363_CHAN_U(7, _s7, 7, bits, NULL, 0),		\
+	MAX1363_CHAN_U(8, _s8, 8, bits, NULL, 0),		\
+	MAX1363_CHAN_U(9, _s9, 9, bits, NULL, 0),		\
+	MAX1363_CHAN_U(10, _s10, 10, bits, NULL, 0),		\
+	MAX1363_CHAN_U(11, _s11, 11, bits, NULL, 0),		\
+	MAX1363_CHAN_B(0, 1, d0m1, 12, bits, NULL, 0),		\
+	MAX1363_CHAN_B(2, 3, d2m3, 13, bits, NULL, 0),		\
+	MAX1363_CHAN_B(4, 5, d4m5, 14, bits, NULL, 0),		\
+	MAX1363_CHAN_B(6, 7, d6m7, 15, bits, NULL, 0),		\
+	MAX1363_CHAN_B(8, 9, d8m9, 16, bits, NULL, 0),		\
+	MAX1363_CHAN_B(10, 11, d10m11, 17, bits, NULL, 0),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 18, bits, NULL, 0),		\
+	MAX1363_CHAN_B(3, 2, d3m2, 19, bits, NULL, 0),		\
+	MAX1363_CHAN_B(5, 4, d5m4, 20, bits, NULL, 0),		\
+	MAX1363_CHAN_B(7, 6, d7m6, 21, bits, NULL, 0),		\
+	MAX1363_CHAN_B(9, 8, d9m8, 22, bits, NULL, 0),		\
+	MAX1363_CHAN_B(11, 10, d11m10, 23, bits, NULL, 0),	\
+	IIO_CHAN_SOFT_TIMESTAMP(24)				\
 	}
 static const struct iio_chan_spec max1038_channels[] = MAX1363_12X_CHANS(8);
 static const struct iio_chan_spec max1138_channels[] = MAX1363_12X_CHANS(10);
@@ -561,22 +602,22 @@
 };
 
 #define MAX1363_8X_CHANS(bits) {			\
-	MAX1363_CHAN_U(0, _s0, 0, bits, 0),		\
-	MAX1363_CHAN_U(1, _s1, 1, bits, 0),		\
-	MAX1363_CHAN_U(2, _s2, 2, bits, 0),		\
-	MAX1363_CHAN_U(3, _s3, 3, bits, 0),		\
-	MAX1363_CHAN_U(4, _s4, 4, bits, 0),		\
-	MAX1363_CHAN_U(5, _s5, 5, bits, 0),		\
-	MAX1363_CHAN_U(6, _s6, 6, bits, 0),		\
-	MAX1363_CHAN_U(7, _s7, 7, bits, 0),		\
-	MAX1363_CHAN_B(0, 1, d0m1, 8, bits, 0),	\
-	MAX1363_CHAN_B(2, 3, d2m3, 9, bits, 0),	\
-	MAX1363_CHAN_B(4, 5, d4m5, 10, bits, 0),	\
-	MAX1363_CHAN_B(6, 7, d6m7, 11, bits, 0),	\
-	MAX1363_CHAN_B(1, 0, d1m0, 12, bits, 0),	\
-	MAX1363_CHAN_B(3, 2, d3m2, 13, bits, 0),	\
-	MAX1363_CHAN_B(5, 4, d5m4, 14, bits, 0),	\
-	MAX1363_CHAN_B(7, 6, d7m6, 15, bits, 0),	\
+	MAX1363_CHAN_U(0, _s0, 0, bits, NULL, 0),	\
+	MAX1363_CHAN_U(1, _s1, 1, bits, NULL, 0),	\
+	MAX1363_CHAN_U(2, _s2, 2, bits, NULL, 0),	\
+	MAX1363_CHAN_U(3, _s3, 3, bits, NULL, 0),	\
+	MAX1363_CHAN_U(4, _s4, 4, bits, NULL, 0),	\
+	MAX1363_CHAN_U(5, _s5, 5, bits, NULL, 0),	\
+	MAX1363_CHAN_U(6, _s6, 6, bits, NULL, 0),	\
+	MAX1363_CHAN_U(7, _s7, 7, bits, NULL, 0),	\
+	MAX1363_CHAN_B(0, 1, d0m1, 8, bits, NULL, 0),	\
+	MAX1363_CHAN_B(2, 3, d2m3, 9, bits, NULL, 0),	\
+	MAX1363_CHAN_B(4, 5, d4m5, 10, bits, NULL, 0),	\
+	MAX1363_CHAN_B(6, 7, d6m7, 11, bits, NULL, 0),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 12, bits, NULL, 0),	\
+	MAX1363_CHAN_B(3, 2, d3m2, 13, bits, NULL, 0),	\
+	MAX1363_CHAN_B(5, 4, d5m4, 14, bits, NULL, 0),	\
+	MAX1363_CHAN_B(7, 6, d7m6, 15, bits, NULL, 0),	\
 	IIO_CHAN_SOFT_TIMESTAMP(16)			\
 }
 static const struct iio_chan_spec max11602_channels[] = MAX1363_8X_CHANS(8);
@@ -588,10 +629,10 @@
 };
 
 #define MAX1363_2X_CHANS(bits) {			\
-	MAX1363_CHAN_U(0, _s0, 0, bits, 0),		\
-	MAX1363_CHAN_U(1, _s1, 1, bits, 0),		\
-	MAX1363_CHAN_B(0, 1, d0m1, 2, bits, 0),	\
-	MAX1363_CHAN_B(1, 0, d1m0, 3, bits, 0),	\
+	MAX1363_CHAN_U(0, _s0, 0, bits, NULL, 0),	\
+	MAX1363_CHAN_U(1, _s1, 1, bits, NULL, 0),	\
+	MAX1363_CHAN_B(0, 1, d0m1, 2, bits, NULL, 0),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 3, bits, NULL, 0),	\
 	IIO_CHAN_SOFT_TIMESTAMP(4)			\
 	}
 
@@ -686,20 +727,22 @@
 		"133000 665000 33300 16600 8300 4200 2000 1000");
 
 static int max1363_read_thresh(struct iio_dev *indio_dev,
-			       u64 event_code,
-			       int *val)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, enum iio_event_info info, int *val,
+	int *val2)
 {
 	struct max1363_state *st = iio_priv(indio_dev);
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING)
-		*val = st->thresh_low[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)];
+	if (dir == IIO_EV_DIR_FALLING)
+		*val = st->thresh_low[chan->channel];
 	else
-		*val = st->thresh_high[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)];
-	return 0;
+		*val = st->thresh_high[chan->channel];
+	return IIO_VAL_INT;
 }
 
 static int max1363_write_thresh(struct iio_dev *indio_dev,
-				u64 event_code,
-				int val)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, enum iio_event_info info, int val,
+	int val2)
 {
 	struct max1363_state *st = iio_priv(indio_dev);
 	/* make it handle signed correctly as well */
@@ -714,13 +757,15 @@
 		break;
 	}
 
-	switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+	switch (dir) {
 	case IIO_EV_DIR_FALLING:
-		st->thresh_low[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)] = val;
+		st->thresh_low[chan->channel] = val;
 		break;
 	case IIO_EV_DIR_RISING:
-		st->thresh_high[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)] = val;
+		st->thresh_high[chan->channel] = val;
 		break;
+	default:
+		return -EINVAL;
 	}
 
 	return 0;
@@ -755,24 +800,25 @@
 	u8 tx[2] = { st->setupbyte,
 		     MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0 };
 
-	i2c_master_recv(st->client, &rx, 1);
+	st->recv(st->client, &rx, 1);
 	mask = rx;
 	for_each_set_bit(loc, &mask, 8)
 		iio_push_event(indio_dev, max1363_event_codes[loc], timestamp);
-	i2c_master_send(st->client, tx, 2);
+	st->send(st->client, tx, 2);
 
 	return IRQ_HANDLED;
 }
 
 static int max1363_read_event_config(struct iio_dev *indio_dev,
-				     u64 event_code)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir)
 {
 	struct max1363_state *st = iio_priv(indio_dev);
 	int val;
-	int number = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
+	int number = chan->channel;
 
 	mutex_lock(&indio_dev->mlock);
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING)
+	if (dir == IIO_EV_DIR_FALLING)
 		val = (1 << number) & st->mask_low;
 	else
 		val = (1 << number) & st->mask_high;
@@ -794,9 +840,7 @@
 		st->setupbyte &= ~MAX1363_SETUP_MONITOR_SETUP;
 		st->configbyte &= ~MAX1363_SCAN_MASK;
 		st->monitor_on = false;
-		return max1363_write_basic_config(st->client,
-						st->setupbyte,
-						st->configbyte);
+		return max1363_write_basic_config(st);
 	}
 
 	/* Ensure we are in the relevant mode */
@@ -858,7 +902,7 @@
 		}
 
 
-	ret = i2c_master_send(st->client, tx_buf, len);
+	ret = st->send(st->client, tx_buf, len);
 	if (ret < 0)
 		goto error_ret;
 	if (ret != len) {
@@ -875,7 +919,7 @@
 	 */
 	tx_buf[0] = st->setupbyte;
 	tx_buf[1] = MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0;
-	ret = i2c_master_send(st->client, tx_buf, 2);
+	ret = st->send(st->client, tx_buf, 2);
 	if (ret < 0)
 		goto error_ret;
 	if (ret != 2) {
@@ -917,17 +961,17 @@
 }
 
 static int max1363_write_event_config(struct iio_dev *indio_dev,
-				      u64 event_code,
-				      int state)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, int state)
 {
 	int ret = 0;
 	struct max1363_state *st = iio_priv(indio_dev);
 	u16 unifiedmask;
-	int number = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
+	int number = chan->channel;
 
 	mutex_lock(&indio_dev->mlock);
 	unifiedmask = st->mask_low | st->mask_high;
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING) {
+	if (dir == IIO_EV_DIR_FALLING) {
 
 		if (state == 0)
 			st->mask_low &= ~(1 << number);
@@ -995,10 +1039,10 @@
 };
 
 static const struct iio_info max1363_info = {
-	.read_event_value = &max1363_read_thresh,
-	.write_event_value = &max1363_write_thresh,
-	.read_event_config = &max1363_read_event_config,
-	.write_event_config = &max1363_write_event_config,
+	.read_event_value_new = &max1363_read_thresh,
+	.write_event_value_new = &max1363_write_thresh,
+	.read_event_config_new = &max1363_read_event_config,
+	.write_event_config_new = &max1363_write_event_config,
 	.read_raw = &max1363_read_raw,
 	.update_scan_mode = &max1363_update_scan_mode,
 	.driver_module = THIS_MODULE,
@@ -1436,7 +1480,6 @@
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct max1363_state *st = iio_priv(indio_dev);
-	s64 time_ns;
 	__u8 *rxbuf;
 	int b_sent;
 	size_t d_size;
@@ -1464,17 +1507,13 @@
 	if (rxbuf == NULL)
 		goto done;
 	if (st->chip_info->bits != 8)
-		b_sent = i2c_master_recv(st->client, rxbuf, numvals*2);
+		b_sent = st->recv(st->client, rxbuf, numvals * 2);
 	else
-		b_sent = i2c_master_recv(st->client, rxbuf, numvals);
+		b_sent = st->recv(st->client, rxbuf, numvals);
 	if (b_sent < 0)
 		goto done_free;
 
-	time_ns = iio_get_time_ns();
-
-	if (indio_dev->scan_timestamp)
-		memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns));
-	iio_push_to_buffers(indio_dev, rxbuf);
+	iio_push_to_buffers_with_timestamp(indio_dev, rxbuf, iio_get_time_ns());
 
 done_free:
 	kfree(rxbuf);
@@ -1484,12 +1523,6 @@
 	return IRQ_HANDLED;
 }
 
-static const struct iio_buffer_setup_ops max1363_buffered_setup_ops = {
-	.postenable = &iio_triggered_buffer_postenable,
-	.preenable = &iio_sw_buffer_preenable,
-	.predisable = &iio_triggered_buffer_predisable,
-};
-
 static int max1363_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -1543,6 +1576,18 @@
 		st->vref_uv = vref_uv;
 	}
 
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		st->send = i2c_master_send;
+		st->recv = i2c_master_recv;
+	} else if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)
+			&& st->chip_info->bits == 8) {
+		st->send = max1363_smbus_send;
+		st->recv = max1363_smbus_recv;
+	} else {
+		ret = -EOPNOTSUPP;
+		goto error_disable_reg;
+	}
+
 	ret = max1363_alloc_scan_masks(indio_dev);
 	if (ret)
 		goto error_disable_reg;
@@ -1559,7 +1604,7 @@
 		goto error_disable_reg;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
-		&max1363_trigger_handler, &max1363_buffered_setup_ops);
+		&max1363_trigger_handler, NULL);
 	if (ret)
 		goto error_disable_reg;
 
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
new file mode 100644
index 0000000..1294832
--- /dev/null
+++ b/drivers/iio/adc/mcp3422.c
@@ -0,0 +1,410 @@
+/*
+ * mcp3422.c - driver for the Microchip mcp3422/3/4 chip family
+ *
+ * Copyright (C) 2013, Angelo Compagnucci
+ * Author: Angelo Compagnucci <angelo.compagnucci@gmail.com>
+ *
+ * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
+ *
+ * This driver exports the value of analog input voltage to sysfs, the
+ * voltage unit is nV.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Masks */
+#define MCP3422_CHANNEL_MASK	0x60
+#define MCP3422_PGA_MASK	0x03
+#define MCP3422_SRATE_MASK	0x0C
+#define MCP3422_SRATE_240	0x0
+#define MCP3422_SRATE_60	0x1
+#define MCP3422_SRATE_15	0x2
+#define MCP3422_SRATE_3	0x3
+#define MCP3422_PGA_1	0
+#define MCP3422_PGA_2	1
+#define MCP3422_PGA_4	2
+#define MCP3422_PGA_8	3
+#define MCP3422_CONT_SAMPLING	0x10
+
+#define MCP3422_CHANNEL(config)	(((config) & MCP3422_CHANNEL_MASK) >> 5)
+#define MCP3422_PGA(config)	((config) & MCP3422_PGA_MASK)
+#define MCP3422_SAMPLE_RATE(config)	(((config) & MCP3422_SRATE_MASK) >> 2)
+
+#define MCP3422_CHANNEL_VALUE(value) (((value) << 5) & MCP3422_CHANNEL_MASK)
+#define MCP3422_PGA_VALUE(value) ((value) & MCP3422_PGA_MASK)
+#define MCP3422_SAMPLE_RATE_VALUE(value) ((value << 2) & MCP3422_SRATE_MASK)
+
+#define MCP3422_CHAN(_index) \
+	{ \
+		.type = IIO_VOLTAGE, \
+		.indexed = 1, \
+		.channel = _index, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \
+				| BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	}
+
+/* LSB is in nV to eliminate floating point */
+static const u32 rates_to_lsb[] = {1000000, 250000, 62500, 15625};
+
+/*
+ *  scales calculated as:
+ *  rates_to_lsb[sample_rate] / (1 << pga);
+ *  pga is 1 for 0, 2
+ */
+
+static const int mcp3422_scales[4][4] = {
+	{ 1000000, 250000, 62500, 15625 },
+	{ 500000 , 125000, 31250, 7812 },
+	{ 250000 , 62500 , 15625, 3906 },
+	{ 125000 , 31250 , 7812 , 1953 } };
+
+/* Constant msleep times for data acquisitions */
+static const int mcp3422_read_times[4] = {
+	[MCP3422_SRATE_240] = 1000 / 240,
+	[MCP3422_SRATE_60] = 1000 / 60,
+	[MCP3422_SRATE_15] = 1000 / 15,
+	[MCP3422_SRATE_3] = 1000 / 3 };
+
+/* sample rates to integer conversion table */
+static const int mcp3422_sample_rates[4] = {
+	[MCP3422_SRATE_240] = 240,
+	[MCP3422_SRATE_60] = 60,
+	[MCP3422_SRATE_15] = 15,
+	[MCP3422_SRATE_3] = 3 };
+
+/* sample rates to sign extension table */
+static const int mcp3422_sign_extend[4] = {
+	[MCP3422_SRATE_240] = 12,
+	[MCP3422_SRATE_60] = 14,
+	[MCP3422_SRATE_15] = 16,
+	[MCP3422_SRATE_3] = 18 };
+
+/* Client data (each client gets its own) */
+struct mcp3422 {
+	struct i2c_client *i2c;
+	u8 config;
+	u8 pga[4];
+	struct mutex lock;
+};
+
+static int mcp3422_update_config(struct mcp3422 *adc, u8 newconfig)
+{
+	int ret;
+
+	mutex_lock(&adc->lock);
+
+	ret = i2c_master_send(adc->i2c, &newconfig, 1);
+	if (ret > 0) {
+		adc->config = newconfig;
+		ret = 0;
+	}
+
+	mutex_unlock(&adc->lock);
+
+	return ret;
+}
+
+static int mcp3422_read(struct mcp3422 *adc, int *value, u8 *config)
+{
+	int ret = 0;
+	u8 sample_rate = MCP3422_SAMPLE_RATE(adc->config);
+	u8 buf[4] = {0, 0, 0, 0};
+	u32 temp;
+
+	if (sample_rate == MCP3422_SRATE_3) {
+		ret = i2c_master_recv(adc->i2c, buf, 4);
+		temp = buf[0] << 16 | buf[1] << 8 | buf[2];
+		*config = buf[3];
+	} else {
+		ret = i2c_master_recv(adc->i2c, buf, 3);
+		temp = buf[0] << 8 | buf[1];
+		*config = buf[2];
+	}
+
+	*value = sign_extend32(temp, mcp3422_sign_extend[sample_rate]);
+
+	return ret;
+}
+
+static int mcp3422_read_channel(struct mcp3422 *adc,
+				struct iio_chan_spec const *channel, int *value)
+{
+	int ret;
+	u8 config;
+	u8 req_channel = channel->channel;
+
+	if (req_channel != MCP3422_CHANNEL(adc->config)) {
+		config = adc->config;
+		config &= ~MCP3422_CHANNEL_MASK;
+		config |= MCP3422_CHANNEL_VALUE(req_channel);
+		config &= ~MCP3422_PGA_MASK;
+		config |= MCP3422_PGA_VALUE(adc->pga[req_channel]);
+		ret = mcp3422_update_config(adc, config);
+		if (ret < 0)
+			return ret;
+		msleep(mcp3422_read_times[MCP3422_SAMPLE_RATE(adc->config)]);
+	}
+
+	return mcp3422_read(adc, value, &config);
+}
+
+static int mcp3422_read_raw(struct iio_dev *iio,
+			struct iio_chan_spec const *channel, int *val1,
+			int *val2, long mask)
+{
+	struct mcp3422 *adc = iio_priv(iio);
+	int err;
+
+	u8 sample_rate = MCP3422_SAMPLE_RATE(adc->config);
+	u8 pga		 = MCP3422_PGA(adc->config);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		err = mcp3422_read_channel(adc, channel, val1);
+		if (err < 0)
+			return -EINVAL;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+
+		*val1 = 0;
+		*val2 = mcp3422_scales[sample_rate][pga];
+		return IIO_VAL_INT_PLUS_NANO;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val1 = mcp3422_sample_rates[MCP3422_SAMPLE_RATE(adc->config)];
+		return IIO_VAL_INT;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int mcp3422_write_raw(struct iio_dev *iio,
+			struct iio_chan_spec const *channel, int val1,
+			int val2, long mask)
+{
+	struct mcp3422 *adc = iio_priv(iio);
+	u8 temp;
+	u8 config = adc->config;
+	u8 req_channel = channel->channel;
+	u8 sample_rate = MCP3422_SAMPLE_RATE(config);
+	u8 i;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (val1 != 0)
+			return -EINVAL;
+
+		for (i = 0; i < ARRAY_SIZE(mcp3422_scales[0]); i++) {
+			if (val2 == mcp3422_scales[sample_rate][i]) {
+				adc->pga[req_channel] = i;
+
+				config &= ~MCP3422_CHANNEL_MASK;
+				config |= MCP3422_CHANNEL_VALUE(req_channel);
+				config &= ~MCP3422_PGA_MASK;
+				config |= MCP3422_PGA_VALUE(adc->pga[req_channel]);
+
+				return mcp3422_update_config(adc, config);
+			}
+		}
+		return -EINVAL;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (val1) {
+		case 240:
+			temp = MCP3422_SRATE_240;
+			break;
+		case 60:
+			temp = MCP3422_SRATE_60;
+			break;
+		case 15:
+			temp = MCP3422_SRATE_15;
+			break;
+		case 3:
+			temp = MCP3422_SRATE_3;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		config &= ~MCP3422_CHANNEL_MASK;
+		config |= MCP3422_CHANNEL_VALUE(req_channel);
+		config &= ~MCP3422_SRATE_MASK;
+		config |= MCP3422_SAMPLE_RATE_VALUE(temp);
+
+		return mcp3422_update_config(adc, config);
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int mcp3422_write_raw_get_fmt(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static ssize_t mcp3422_show_scales(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mcp3422 *adc = iio_priv(dev_to_iio_dev(dev));
+	u8 sample_rate = MCP3422_SAMPLE_RATE(adc->config);
+
+	return sprintf(buf, "0.%09u 0.%09u 0.%09u 0.%09u\n",
+		mcp3422_scales[sample_rate][0],
+		mcp3422_scales[sample_rate][1],
+		mcp3422_scales[sample_rate][2],
+		mcp3422_scales[sample_rate][3]);
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("240 60 15 3");
+static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO,
+		mcp3422_show_scales, NULL, 0);
+
+static struct attribute *mcp3422_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group mcp3422_attribute_group = {
+	.attrs = mcp3422_attributes,
+};
+
+static const struct iio_chan_spec mcp3422_channels[] = {
+	MCP3422_CHAN(0),
+	MCP3422_CHAN(1),
+};
+
+static const struct iio_chan_spec mcp3424_channels[] = {
+	MCP3422_CHAN(0),
+	MCP3422_CHAN(1),
+	MCP3422_CHAN(2),
+	MCP3422_CHAN(3),
+};
+
+static const struct iio_info mcp3422_info = {
+	.read_raw = mcp3422_read_raw,
+	.write_raw = mcp3422_write_raw,
+	.write_raw_get_fmt = mcp3422_write_raw_get_fmt,
+	.attrs = &mcp3422_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int mcp3422_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct mcp3422 *adc;
+	int err;
+	u8 config;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->i2c = client;
+
+	mutex_init(&adc->lock);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = dev_name(&client->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mcp3422_info;
+
+	switch ((unsigned int)(id->driver_data)) {
+	case 2:
+	case 3:
+		indio_dev->channels = mcp3422_channels;
+		indio_dev->num_channels = ARRAY_SIZE(mcp3422_channels);
+		break;
+	case 4:
+		indio_dev->channels = mcp3424_channels;
+		indio_dev->num_channels = ARRAY_SIZE(mcp3424_channels);
+		break;
+	}
+
+	/* meaningful default configuration */
+	config = (MCP3422_CONT_SAMPLING
+		| MCP3422_CHANNEL_VALUE(1)
+		| MCP3422_PGA_VALUE(MCP3422_PGA_1)
+		| MCP3422_SAMPLE_RATE_VALUE(MCP3422_SRATE_240));
+	mcp3422_update_config(adc, config);
+
+	err = iio_device_register(indio_dev);
+	if (err < 0)
+		return err;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	return 0;
+}
+
+static int mcp3422_remove(struct i2c_client *client)
+{
+	iio_device_unregister(i2c_get_clientdata(client));
+	return 0;
+}
+
+static const struct i2c_device_id mcp3422_id[] = {
+	{ "mcp3422", 2 },
+	{ "mcp3423", 3 },
+	{ "mcp3424", 4 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcp3422_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id mcp3422_of_match[] = {
+	{ .compatible = "mcp3422" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mcp3422_of_match);
+#endif
+
+static struct i2c_driver mcp3422_driver = {
+	.driver = {
+		.name = "mcp3422",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(mcp3422_of_match),
+	},
+	.probe = mcp3422_probe,
+	.remove = mcp3422_remove,
+	.id_table = mcp3422_id,
+};
+module_i2c_driver(mcp3422_driver);
+
+MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
+MODULE_DESCRIPTION("Microchip mcp3422/3/4 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c
index bdf0346..54c5bab 100644
--- a/drivers/iio/adc/nau7802.c
+++ b/drivers/iio/adc/nau7802.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/wait.h>
 #include <linux/log2.h>
+#include <linux/of.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -569,7 +570,7 @@
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",
-		   .of_match_table = of_match_ptr(nau7802_dt_ids),
+		   .of_match_table = nau7802_dt_ids,
 	},
 };
 
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
index ee5f72b..b3a82b4 100644
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -9,6 +9,7 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of.h>
 
 #include <linux/iio/iio.h>
 #include <linux/regulator/consumer.h>
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index a952538..728411e 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -28,12 +28,16 @@
 #include <linux/iio/driver.h>
 
 #include <linux/mfd/ti_am335x_tscadc.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
 
 struct tiadc_device {
 	struct ti_tscadc_dev *mfd_tscadc;
 	int channels;
 	u8 channel_line[8];
 	u8 channel_step[8];
+	int buffer_en_ch_steps;
+	u16 data[8];
 };
 
 static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
@@ -56,8 +60,14 @@
 	return step_en;
 }
 
-static void tiadc_step_config(struct tiadc_device *adc_dev)
+static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
 {
+	return 1 << adc_dev->channel_step[chan];
+}
+
+static void tiadc_step_config(struct iio_dev *indio_dev)
+{
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	unsigned int stepconfig;
 	int i, steps;
 
@@ -72,7 +82,11 @@
 	 */
 
 	steps = TOTAL_STEPS - adc_dev->channels;
-	stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
+	if (iio_buffer_enabled(indio_dev))
+		stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
+					| STEPCONFIG_MODE_SWCNT;
+	else
+		stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
 
 	for (i = 0; i < adc_dev->channels; i++) {
 		int chan;
@@ -85,9 +99,175 @@
 		adc_dev->channel_step[i] = steps;
 		steps++;
 	}
-
 }
 
+static irqreturn_t tiadc_irq_h(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	unsigned int status, config;
+	status = tiadc_readl(adc_dev, REG_IRQSTATUS);
+
+	/*
+	 * ADC and touchscreen share the IRQ line.
+	 * FIFO0 interrupts are used by TSC. Handle FIFO1 IRQs here only
+	 */
+	if (status & IRQENB_FIFO1OVRRUN) {
+		/* FIFO Overrun. Clear flag. Disable/Enable ADC to recover */
+		config = tiadc_readl(adc_dev, REG_CTRL);
+		config &= ~(CNTRLREG_TSCSSENB);
+		tiadc_writel(adc_dev, REG_CTRL, config);
+		tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
+				| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+		tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
+		return IRQ_HANDLED;
+	} else if (status & IRQENB_FIFO1THRES) {
+		/* Disable irq and wake worker thread */
+		tiadc_writel(adc_dev, REG_IRQCLR, IRQENB_FIFO1THRES);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t tiadc_worker_h(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int i, k, fifo1count, read;
+	u16 *data = adc_dev->data;
+
+	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+	for (k = 0; k < fifo1count; k = k + i) {
+		for (i = 0; i < (indio_dev->scan_bytes)/2; i++) {
+			read = tiadc_readl(adc_dev, REG_FIFO1);
+			data[i] = read & FIFOREAD_DATA_MASK;
+		}
+		iio_push_to_buffers(indio_dev, (u8 *) data);
+	}
+
+	tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
+	tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
+
+	return IRQ_HANDLED;
+}
+
+static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int i, fifo1count, read;
+
+	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
+				IRQENB_FIFO1OVRRUN |
+				IRQENB_FIFO1UNDRFLW));
+
+	/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
+	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+	for (i = 0; i < fifo1count; i++)
+		read = tiadc_readl(adc_dev, REG_FIFO1);
+
+	return 0;
+}
+
+static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	struct iio_buffer *buffer = indio_dev->buffer;
+	unsigned int enb = 0;
+	u8 bit;
+
+	tiadc_step_config(indio_dev);
+	for_each_set_bit(bit, buffer->scan_mask, adc_dev->channels)
+		enb |= (get_adc_step_bit(adc_dev, bit) << 1);
+	adc_dev->buffer_en_ch_steps = enb;
+
+	am335x_tsc_se_set(adc_dev->mfd_tscadc, enb);
+
+	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
+				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
+	tiadc_writel(adc_dev,  REG_IRQENABLE, IRQENB_FIFO1THRES
+				| IRQENB_FIFO1OVRRUN);
+
+	return 0;
+}
+
+static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int fifo1count, i, read;
+
+	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
+				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
+
+	/* Flush FIFO of leftover data in the time it takes to disable adc */
+	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+	for (i = 0; i < fifo1count; i++)
+		read = tiadc_readl(adc_dev, REG_FIFO1);
+
+	return 0;
+}
+
+static int tiadc_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	tiadc_step_config(indio_dev);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
+	.preenable = &tiadc_buffer_preenable,
+	.postenable = &tiadc_buffer_postenable,
+	.predisable = &tiadc_buffer_predisable,
+	.postdisable = &tiadc_buffer_postdisable,
+};
+
+static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
+	irqreturn_t (*pollfunc_bh)(int irq, void *p),
+	irqreturn_t (*pollfunc_th)(int irq, void *p),
+	int irq,
+	unsigned long flags,
+	const struct iio_buffer_setup_ops *setup_ops)
+{
+	int ret;
+
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
+	if (!indio_dev->buffer)
+		return -ENOMEM;
+
+	ret = request_threaded_irq(irq,	pollfunc_th, pollfunc_bh,
+				flags, indio_dev->name, indio_dev);
+	if (ret)
+		goto error_kfifo_free;
+
+	indio_dev->setup_ops = setup_ops;
+	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+
+	ret = iio_buffer_register(indio_dev,
+				  indio_dev->channels,
+				  indio_dev->num_channels);
+	if (ret)
+		goto error_free_irq;
+
+	return 0;
+
+error_free_irq:
+	free_irq(irq, indio_dev);
+error_kfifo_free:
+	iio_kfifo_free(indio_dev->buffer);
+	return ret;
+}
+
+static void tiadc_iio_buffered_hardware_remove(struct iio_dev *indio_dev)
+{
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+
+	free_irq(adc_dev->mfd_tscadc->irq, indio_dev);
+	iio_kfifo_free(indio_dev->buffer);
+	iio_buffer_unregister(indio_dev);
+}
+
+
 static const char * const chan_name_ain[] = {
 	"AIN0",
 	"AIN1",
@@ -120,9 +300,10 @@
 		chan->channel = adc_dev->channel_line[i];
 		chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
 		chan->datasheet_name = chan_name_ain[chan->channel];
+		chan->scan_index = i;
 		chan->scan_type.sign = 'u';
 		chan->scan_type.realbits = 12;
-		chan->scan_type.storagebits = 32;
+		chan->scan_type.storagebits = 16;
 	}
 
 	indio_dev->channels = chan_array;
@@ -142,11 +323,14 @@
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	int i, map_val;
 	unsigned int fifo1count, read, stepid;
-	u32 step = UINT_MAX;
 	bool found = false;
 	u32 step_en;
 	unsigned long timeout = jiffies + usecs_to_jiffies
 				(IDLE_TIMEOUT * adc_dev->channels);
+
+	if (iio_buffer_enabled(indio_dev))
+		return -EBUSY;
+
 	step_en = get_adc_step_mask(adc_dev);
 	am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
 
@@ -168,15 +352,6 @@
 	 * Hence we need to flush out this data.
 	 */
 
-	for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
-		if (chan->channel == adc_dev->channel_line[i]) {
-			step = adc_dev->channel_step[i];
-			break;
-		}
-	}
-	if (WARN_ON_ONCE(step == UINT_MAX))
-		return -EINVAL;
-
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (i = 0; i < fifo1count; i++) {
 		read = tiadc_readl(adc_dev, REG_FIFO1);
@@ -186,7 +361,7 @@
 		if (stepid == map_val) {
 			read = read & FIFOREAD_DATA_MASK;
 			found = true;
-			*val = read;
+			*val = (u16) read;
 		}
 	}
 
@@ -237,20 +412,33 @@
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &tiadc_info;
 
-	tiadc_step_config(adc_dev);
+	tiadc_step_config(indio_dev);
+	tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
 
 	err = tiadc_channel_init(indio_dev, adc_dev->channels);
 	if (err < 0)
 		return err;
 
-	err = iio_device_register(indio_dev);
+	err = tiadc_iio_buffered_hardware_setup(indio_dev,
+		&tiadc_worker_h,
+		&tiadc_irq_h,
+		adc_dev->mfd_tscadc->irq,
+		IRQF_SHARED,
+		&tiadc_buffer_setup_ops);
+
 	if (err)
 		goto err_free_channels;
 
+	err = iio_device_register(indio_dev);
+	if (err)
+		goto err_buffer_unregister;
+
 	platform_set_drvdata(pdev, indio_dev);
 
 	return 0;
 
+err_buffer_unregister:
+	tiadc_iio_buffered_hardware_remove(indio_dev);
 err_free_channels:
 	tiadc_channels_remove(indio_dev);
 	return err;
@@ -263,6 +451,7 @@
 	u32 step_en;
 
 	iio_device_unregister(indio_dev);
+	tiadc_iio_buffered_hardware_remove(indio_dev);
 	tiadc_channels_remove(indio_dev);
 
 	step_en = get_adc_step_mask(adc_dev);
@@ -301,7 +490,7 @@
 	restore &= ~(CNTRLREG_POWERDOWN);
 	tiadc_writel(adc_dev, REG_CTRL, restore);
 
-	tiadc_step_config(adc_dev);
+	tiadc_step_config(indio_dev);
 
 	return 0;
 }
@@ -326,7 +515,7 @@
 		.name   = "TI-am335x-adc",
 		.owner	= THIS_MODULE,
 		.pm	= TIADC_PM_OPS,
-		.of_match_table = of_match_ptr(ti_adc_dt_ids),
+		.of_match_table = ti_adc_dt_ids,
 	},
 	.probe	= tiadc_probe,
 	.remove	= tiadc_remove,
diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
index 0ea96c0..53e1c64 100644
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -887,7 +887,7 @@
 	int irq;
 	int ret;
 
-	match = of_match_device(of_match_ptr(of_twl6030_match_tbl), dev);
+	match = of_match_device(of_twl6030_match_tbl, dev);
 	if (!match)
 		return -EINVAL;
 
@@ -948,9 +948,7 @@
 	indio_dev->channels = pdata->iio_channels;
 	indio_dev->num_channels = pdata->nchannels;
 
-	ret = iio_device_register(indio_dev);
-
-	return ret;
+	return iio_device_register(indio_dev);
 }
 
 static int twl6030_gpadc_remove(struct platform_device *pdev)
diff --git a/drivers/iio/buffer_cb.c b/drivers/iio/buffer_cb.c
index 415f3c6..2d9c6f8 100644
--- a/drivers/iio/buffer_cb.c
+++ b/drivers/iio/buffer_cb.c
@@ -7,26 +7,36 @@
 
 struct iio_cb_buffer {
 	struct iio_buffer buffer;
-	int (*cb)(u8 *data, void *private);
+	int (*cb)(const void *data, void *private);
 	void *private;
 	struct iio_channel *channels;
 };
 
-static int iio_buffer_cb_store_to(struct iio_buffer *buffer, u8 *data)
+static struct iio_cb_buffer *buffer_to_cb_buffer(struct iio_buffer *buffer)
 {
-	struct iio_cb_buffer *cb_buff = container_of(buffer,
-						     struct iio_cb_buffer,
-						     buffer);
+	return container_of(buffer, struct iio_cb_buffer, buffer);
+}
 
+static int iio_buffer_cb_store_to(struct iio_buffer *buffer, const void *data)
+{
+	struct iio_cb_buffer *cb_buff = buffer_to_cb_buffer(buffer);
 	return cb_buff->cb(data, cb_buff->private);
 }
 
-static struct iio_buffer_access_funcs iio_cb_access = {
+static void iio_buffer_cb_release(struct iio_buffer *buffer)
+{
+	struct iio_cb_buffer *cb_buff = buffer_to_cb_buffer(buffer);
+	kfree(cb_buff->buffer.scan_mask);
+	kfree(cb_buff);
+}
+
+static const struct iio_buffer_access_funcs iio_cb_access = {
 	.store_to = &iio_buffer_cb_store_to,
+	.release = &iio_buffer_cb_release,
 };
 
 struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
-					     int (*cb)(u8 *data,
+					     int (*cb)(const void *data,
 						       void *private),
 					     void *private)
 {
@@ -104,9 +114,8 @@
 
 void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buff)
 {
-	kfree(cb_buff->buffer.scan_mask);
 	iio_channel_release_all(cb_buff->channels);
-	kfree(cb_buff);
+	iio_buffer_put(&cb_buff->buffer);
 }
 EXPORT_SYMBOL_GPL(iio_channel_release_all_cb);
 
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 87419c4..b6e77e0 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -34,6 +34,12 @@
 	struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
 	int state_val;
 
+	if (state) {
+		if (sensor_hub_device_open(st->hsdev))
+			return -EIO;
+	} else
+		sensor_hub_device_close(st->hsdev);
+
 	state_val = state ? 1 : 0;
 	if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
 		++state_val;
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
index 71a2c5f..1665c8e 100644
--- a/drivers/iio/common/st_sensors/st_sensors_buffer.c
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -113,11 +113,8 @@
 	if (len < 0)
 		goto st_sensors_get_buffer_element_error;
 
-	if (indio_dev->scan_timestamp)
-		*(s64 *)((u8 *)sdata->buffer_data +
-				ALIGN(len, sizeof(s64))) = pf->timestamp;
-
-	iio_push_to_buffers(indio_dev, sdata->buffer_data);
+	iio_push_to_buffers_with_timestamp(indio_dev, sdata->buffer_data,
+		pf->timestamp);
 
 st_sensors_get_buffer_element_error:
 	iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 965ee22..7ba1ef2 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -198,21 +198,17 @@
 }
 EXPORT_SYMBOL(st_sensors_set_axis_enable);
 
-int st_sensors_init_sensor(struct iio_dev *indio_dev,
-					struct st_sensors_platform_data *pdata)
+static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
+				       struct st_sensors_platform_data *pdata)
 {
-	int err;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	mutex_init(&sdata->tb.buf_lock);
-
 	switch (pdata->drdy_int_pin) {
 	case 1:
 		if (sdata->sensor->drdy_irq.mask_int1 == 0) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT1 not available.\n");
-			err = -EINVAL;
-			goto init_error;
+			return -EINVAL;
 		}
 		sdata->drdy_int_pin = 1;
 		break;
@@ -220,39 +216,53 @@
 		if (sdata->sensor->drdy_irq.mask_int2 == 0) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT2 not available.\n");
-			err = -EINVAL;
-			goto init_error;
+			return -EINVAL;
 		}
 		sdata->drdy_int_pin = 2;
 		break;
 	default:
 		dev_err(&indio_dev->dev, "DRDY on pdata not valid.\n");
-		err = -EINVAL;
-		goto init_error;
+		return -EINVAL;
 	}
 
+	return 0;
+}
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+					struct st_sensors_platform_data *pdata)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int err = 0;
+
+	mutex_init(&sdata->tb.buf_lock);
+
+	if (pdata)
+		err = st_sensors_set_drdy_int_pin(indio_dev, pdata);
+
 	err = st_sensors_set_enable(indio_dev, false);
 	if (err < 0)
-		goto init_error;
+		return err;
 
-	err = st_sensors_set_fullscale(indio_dev,
-						sdata->current_fullscale->num);
-	if (err < 0)
-		goto init_error;
+	if (sdata->current_fullscale) {
+		err = st_sensors_set_fullscale(indio_dev,
+					       sdata->current_fullscale->num);
+		if (err < 0)
+			return err;
+	} else
+		dev_info(&indio_dev->dev, "Full-scale not possible\n");
 
 	err = st_sensors_set_odr(indio_dev, sdata->odr);
 	if (err < 0)
-		goto init_error;
+		return err;
 
 	/* set BDU */
 	err = st_sensors_write_data_with_mask(indio_dev,
 			sdata->sensor->bdu.addr, sdata->sensor->bdu.mask, true);
 	if (err < 0)
-		goto init_error;
+		return err;
 
 	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 
-init_error:
 	return err;
 }
 EXPORT_SYMBOL(st_sensors_init_sensor);
@@ -263,6 +273,9 @@
 	u8 drdy_mask;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
+	if (!sdata->sensor->drdy_irq.addr)
+		return 0;
+
 	/* Enable/Disable the interrupt generator 1. */
 	if (sdata->sensor->drdy_irq.ig1.en_addr > 0) {
 		err = st_sensors_write_data_with_mask(indio_dev,
@@ -318,10 +331,8 @@
 	unsigned int byte_for_channel = ch->scan_type.storagebits >> 3;
 
 	outdata = kmalloc(byte_for_channel, GFP_KERNEL);
-	if (!outdata) {
-		err = -EINVAL;
-		goto st_sensors_read_axis_data_error;
-	}
+	if (!outdata)
+		return -ENOMEM;
 
 	err = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
 				ch->address, byte_for_channel,
@@ -336,7 +347,7 @@
 
 st_sensors_free_memory:
 	kfree(outdata);
-st_sensors_read_axis_data_error:
+
 	return err;
 }
 
@@ -349,28 +360,25 @@
 	mutex_lock(&indio_dev->mlock);
 	if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
 		err = -EBUSY;
-		goto read_error;
+		goto out;
 	} else {
 		err = st_sensors_set_enable(indio_dev, true);
 		if (err < 0)
-			goto read_error;
+			goto out;
 
 		msleep((sdata->sensor->bootime * 1000) / sdata->odr);
 		err = st_sensors_read_axis_data(indio_dev, ch, val);
 		if (err < 0)
-			goto read_error;
+			goto out;
 
 		*val = *val >> ch->scan_type.shift;
 
 		err = st_sensors_set_enable(indio_dev, false);
 	}
+out:
 	mutex_unlock(&indio_dev->mlock);
 
 	return err;
-
-read_error:
-	mutex_unlock(&indio_dev->mlock);
-	return err;
 }
 EXPORT_SYMBOL(st_sensors_read_info_raw);
 
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 3c6a78a..f378ca8 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -57,7 +57,7 @@
 	  Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
 	  AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
 	  AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612,
-	  AD5620, AD5621, AD5622, AD5640, AD5660, AD5662 DACs.
+	  AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5446.
diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
index a3a52be..cb9c636 100644
--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -239,10 +239,9 @@
 		if (scale_uv < 0)
 			return scale_uv;
 
-		scale_uv = (scale_uv * 100) >> chan->scan_type.realbits;
-		*val =  scale_uv / 100000;
-		*val2 = (scale_uv % 100000) * 10;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = scale_uv / 1000;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	default:
 		break;
 	}
@@ -285,8 +284,9 @@
 		.name = "powerdown",
 		.read = ad5064_read_dac_powerdown,
 		.write = ad5064_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", false, &ad5064_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SEPARATE, &ad5064_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5064_powerdown_mode_enum),
 	{ },
 };
diff --git a/drivers/iio/dac/ad5360.c b/drivers/iio/dac/ad5360.c
index d2da71e..b968af5 100644
--- a/drivers/iio/dac/ad5360.c
+++ b/drivers/iio/dac/ad5360.c
@@ -379,15 +379,14 @@
 		*val = ret >> chan->scan_type.shift;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		/* vout = 4 * vref * dac_code */
-		scale_uv = ad5360_get_channel_vref(st, chan->channel) * 4 * 100;
+		scale_uv = ad5360_get_channel_vref(st, chan->channel);
 		if (scale_uv < 0)
 			return scale_uv;
 
-		scale_uv >>= (chan->scan_type.realbits);
-		*val =  scale_uv / 100000;
-		*val2 = (scale_uv % 100000) * 10;
-		return IIO_VAL_INT_PLUS_MICRO;
+		/* vout = 4 * vref * dac_code */
+		*val = scale_uv * 4 / 1000;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_CALIBBIAS:
 		ret = ad5360_read(indio_dev, AD5360_READBACK_OFFSET,
 			chan->address);
diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c
index 1c44ae3..a59ff0e 100644
--- a/drivers/iio/dac/ad5380.c
+++ b/drivers/iio/dac/ad5380.c
@@ -204,7 +204,6 @@
 	struct iio_chan_spec const *chan, int *val, int *val2, long info)
 {
 	struct ad5380_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
 	int ret;
 
 	switch (info) {
@@ -225,10 +224,9 @@
 		val -= (1 << chan->scan_type.realbits) / 2;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = ((2 * st->vref) >> chan->scan_type.realbits) * 100;
-		*val =  scale_uv / 100000;
-		*val2 = (scale_uv % 100000) * 10;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = 2 * st->vref;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	default:
 		break;
 	}
@@ -247,8 +245,10 @@
 		.name = "powerdown",
 		.read = ad5380_read_dac_powerdown,
 		.write = ad5380_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", true, &ad5380_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE,
+		 &ad5380_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5380_powerdown_mode_enum),
 	{ },
 };
@@ -269,72 +269,72 @@
 	[ID_AD5380_3] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 40,
-		.int_vref = 1250000,
+		.int_vref = 1250,
 	},
 	[ID_AD5380_5] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 40,
-		.int_vref = 2500000,
+		.int_vref = 2500,
 	},
 	[ID_AD5381_3] = {
 		.channel_template = AD5380_CHANNEL(12),
 		.num_channels = 16,
-		.int_vref = 1250000,
+		.int_vref = 1250,
 	},
 	[ID_AD5381_5] = {
 		.channel_template = AD5380_CHANNEL(12),
 		.num_channels = 16,
-		.int_vref = 2500000,
+		.int_vref = 2500,
 	},
 	[ID_AD5382_3] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 32,
-		.int_vref = 1250000,
+		.int_vref = 1250,
 	},
 	[ID_AD5382_5] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 32,
-		.int_vref = 2500000,
+		.int_vref = 2500,
 	},
 	[ID_AD5383_3] = {
 		.channel_template = AD5380_CHANNEL(12),
 		.num_channels = 32,
-		.int_vref = 1250000,
+		.int_vref = 1250,
 	},
 	[ID_AD5383_5] = {
 		.channel_template = AD5380_CHANNEL(12),
 		.num_channels = 32,
-		.int_vref = 2500000,
+		.int_vref = 2500,
 	},
 	[ID_AD5390_3] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 16,
-		.int_vref = 1250000,
+		.int_vref = 1250,
 	},
 	[ID_AD5390_5] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 16,
-		.int_vref = 2500000,
+		.int_vref = 2500,
 	},
 	[ID_AD5391_3] = {
 		.channel_template = AD5380_CHANNEL(12),
 		.num_channels = 16,
-		.int_vref = 1250000,
+		.int_vref = 1250,
 	},
 	[ID_AD5391_5] = {
 		.channel_template = AD5380_CHANNEL(12),
 		.num_channels = 16,
-		.int_vref = 2500000,
+		.int_vref = 2500,
 	},
 	[ID_AD5392_3] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 8,
-		.int_vref = 1250000,
+		.int_vref = 1250,
 	},
 	[ID_AD5392_5] = {
 		.channel_template = AD5380_CHANNEL(14),
 		.num_channels = 8,
-		.int_vref = 2500000,
+		.int_vref = 2500,
 	},
 };
 
@@ -393,7 +393,7 @@
 		return ret;
 	}
 
-	if (st->chip_info->int_vref == 2500000)
+	if (st->chip_info->int_vref == 2500)
 		ctrl |= AD5380_CTRL_INT_VREF_2V5;
 
 	st->vref_reg = devm_regulator_get(dev, "vref");
@@ -409,7 +409,7 @@
 		if (ret < 0)
 			goto error_disable_reg;
 
-		st->vref = ret;
+		st->vref = ret / 1000;
 	} else {
 		st->vref = st->chip_info->int_vref;
 		ctrl |= AD5380_CTRL_INT_VREF_EN;
diff --git a/drivers/iio/dac/ad5421.c b/drivers/iio/dac/ad5421.c
index 1f78b14..3eeaa82 100644
--- a/drivers/iio/dac/ad5421.c
+++ b/drivers/iio/dac/ad5421.c
@@ -80,6 +80,29 @@
 	} data[2] ____cacheline_aligned;
 };
 
+static const struct iio_event_spec ad5421_current_event[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_event_spec ad5421_temp_event[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
 static const struct iio_chan_spec ad5421_channels[] = {
 	{
 		.type = IIO_CURRENT,
@@ -92,13 +115,14 @@
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
 			BIT(IIO_CHAN_INFO_OFFSET),
 		.scan_type = IIO_ST('u', 16, 16, 0),
-		.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
-			IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
+		.event_spec = ad5421_current_event,
+		.num_event_specs = ARRAY_SIZE(ad5421_current_event),
 	},
 	{
 		.type = IIO_TEMP,
 		.channel = -1,
-		.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
+		.event_spec = ad5421_temp_event,
+		.num_event_specs = ARRAY_SIZE(ad5421_temp_event),
 	},
 };
 
@@ -281,18 +305,11 @@
 	return (min * (1 << 16)) / (max - min);
 }
 
-static inline unsigned int ad5421_get_scale(struct ad5421_state *st)
-{
-	unsigned int min, max;
-
-	ad5421_get_current_min_max(st, &min, &max);
-	return ((max - min) * 1000) / (1 << 16);
-}
-
 static int ad5421_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long m)
 {
 	struct ad5421_state *st = iio_priv(indio_dev);
+	unsigned int min, max;
 	int ret;
 
 	if (chan->type != IIO_CURRENT)
@@ -306,9 +323,10 @@
 		*val = ret;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		*val2 = ad5421_get_scale(st);
-		return IIO_VAL_INT_PLUS_MICRO;
+		ad5421_get_current_min_max(st, &min, &max);
+		*val = max - min;
+		*val2 = (1 << 16) * 1000;
+		return IIO_VAL_FRACTIONAL;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = ad5421_get_offset(st);
 		return IIO_VAL_INT;
@@ -359,15 +377,15 @@
 }
 
 static int ad5421_write_event_config(struct iio_dev *indio_dev,
-	u64 event_code, int state)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, int state)
 {
 	struct ad5421_state *st = iio_priv(indio_dev);
 	unsigned int mask;
 
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+	switch (chan->type) {
 	case IIO_CURRENT:
-		if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			IIO_EV_DIR_RISING)
+		if (dir == IIO_EV_DIR_RISING)
 			mask = AD5421_FAULT_OVER_CURRENT;
 		else
 			mask = AD5421_FAULT_UNDER_CURRENT;
@@ -390,15 +408,15 @@
 }
 
 static int ad5421_read_event_config(struct iio_dev *indio_dev,
-	u64 event_code)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir)
 {
 	struct ad5421_state *st = iio_priv(indio_dev);
 	unsigned int mask;
 
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+	switch (chan->type) {
 	case IIO_CURRENT:
-		if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			IIO_EV_DIR_RISING)
+		if (dir == IIO_EV_DIR_RISING)
 			mask = AD5421_FAULT_OVER_CURRENT;
 		else
 			mask = AD5421_FAULT_UNDER_CURRENT;
@@ -413,12 +431,14 @@
 	return (bool)(st->fault_mask & mask);
 }
 
-static int ad5421_read_event_value(struct iio_dev *indio_dev, u64 event_code,
-	int *val)
+static int ad5421_read_event_value(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, enum iio_event_info info, int *val,
+	int *val2)
 {
 	int ret;
 
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+	switch (chan->type) {
 	case IIO_CURRENT:
 		ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA);
 		if (ret < 0)
@@ -432,15 +452,15 @@
 		return -EINVAL;
 	}
 
-	return 0;
+	return IIO_VAL_INT;
 }
 
 static const struct iio_info ad5421_info = {
 	.read_raw =		ad5421_read_raw,
 	.write_raw =		ad5421_write_raw,
-	.read_event_config =	ad5421_read_event_config,
-	.write_event_config =	ad5421_write_event_config,
-	.read_event_value =	ad5421_read_event_value,
+	.read_event_config_new = ad5421_read_event_config,
+	.write_event_config_new = ad5421_write_event_config,
+	.read_event_value_new =	ad5421_read_event_value,
 	.driver_module =	THIS_MODULE,
 };
 
@@ -494,13 +514,7 @@
 			return ret;
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to register iio device: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int ad5421_remove(struct spi_device *spi)
diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
index 96e9ed4..1263b0e 100644
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -132,8 +132,9 @@
 		.name = "powerdown",
 		.read = ad5446_read_dac_powerdown,
 		.write = ad5446_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", false, &ad5446_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SEPARATE, &ad5446_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5446_powerdown_mode_enum),
 	{ },
 };
@@ -162,18 +163,15 @@
 			   long m)
 {
 	struct ad5446_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
 		*val = st->cached_val;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
-		*val =  scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
-
+		*val = st->vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -329,6 +327,7 @@
 	ID_AD5601,
 	ID_AD5611,
 	ID_AD5621,
+	ID_AD5641,
 	ID_AD5620_2500,
 	ID_AD5620_1250,
 	ID_AD5640_2500,
@@ -391,6 +390,10 @@
 		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.write = ad5446_write,
 	},
+	[ID_AD5641] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
+		.write = ad5446_write,
+	},
 	[ID_AD5620_2500] = {
 		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.int_vref_mv = 2500,
@@ -445,6 +448,7 @@
 	{"ad5601", ID_AD5601},
 	{"ad5611", ID_AD5611},
 	{"ad5621", ID_AD5621},
+	{"ad5641", ID_AD5641},
 	{"ad5620-2500", ID_AD5620_2500}, /* AD5620/40/60: */
 	{"ad5620-1250", ID_AD5620_1250}, /* part numbers may look differently */
 	{"ad5640-2500", ID_AD5640_2500},
diff --git a/drivers/iio/dac/ad5449.c b/drivers/iio/dac/ad5449.c
index fff7d07..82e208f 100644
--- a/drivers/iio/dac/ad5449.c
+++ b/drivers/iio/dac/ad5449.c
@@ -101,7 +101,6 @@
 {
 	struct ad5449 *st = iio_priv(indio_dev);
 	int ret;
-	struct spi_message msg;
 	struct spi_transfer t[] = {
 		{
 			.tx_buf = &st->data[0],
@@ -114,15 +113,11 @@
 		},
 	};
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&t[0], &msg);
-	spi_message_add_tail(&t[1], &msg);
-
 	mutex_lock(&indio_dev->mlock);
 	st->data[0] = cpu_to_be16(addr << 12);
 	st->data[1] = cpu_to_be16(AD5449_CMD_NOOP);
 
-	ret = spi_sync(st->spi, &msg);
+	ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
 	if (ret < 0)
 		goto out_unlock;
 
diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
index caffb16..c0957a9 100644
--- a/drivers/iio/dac/ad5504.c
+++ b/drivers/iio/dac/ad5504.c
@@ -100,7 +100,6 @@
 			   long m)
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
 	int ret;
 
 	switch (m) {
@@ -113,11 +112,9 @@
 
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
-		*val =  scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
-
+		*val = st->vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -248,8 +245,10 @@
 		.name = "powerdown",
 		.read = ad5504_read_dac_powerdown,
 		.write = ad5504_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", true, &ad5504_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE,
+		 &ad5504_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5504_powerdown_mode_enum),
 	{ },
 };
diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c
index 714af75..774dd96 100644
--- a/drivers/iio/dac/ad5624r_spi.c
+++ b/drivers/iio/dac/ad5624r_spi.c
@@ -50,15 +50,12 @@
 			   long m)
 {
 	struct ad5624r_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
-		*val =  scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
-
+		*val = st->vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -163,8 +160,10 @@
 		.name = "powerdown",
 		.read = ad5624r_read_dac_powerdown,
 		.write = ad5624r_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", true, &ad5624r_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE,
+		 &ad5624r_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5624r_powerdown_mode_enum),
 	{ },
 };
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index 57825ea..30e506e 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -201,7 +201,6 @@
 			   long m)
 {
 	struct ad5686_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
 	int ret;
 
 	switch (m) {
@@ -213,14 +212,10 @@
 			return ret;
 		*val = ret;
 		return IIO_VAL_INT;
-		break;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->vref_mv * 100000)
-			>> (chan->scan_type.realbits);
-		*val =  scale_uv / 100000;
-		*val2 = (scale_uv % 100000) * 10;
-		return IIO_VAL_INT_PLUS_MICRO;
-
+		*val = st->vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -265,8 +260,9 @@
 		.name = "powerdown",
 		.read = ad5686_read_dac_powerdown,
 		.write = ad5686_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", false, &ad5686_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SEPARATE, &ad5686_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5686_powerdown_mode_enum),
 	{ },
 };
diff --git a/drivers/iio/dac/ad5755.c b/drivers/iio/dac/ad5755.c
index 36a4361..9a78d5a 100644
--- a/drivers/iio/dac/ad5755.c
+++ b/drivers/iio/dac/ad5755.c
@@ -253,15 +253,6 @@
 	return (min * (1 << chan->scan_type.realbits)) / (max - min);
 }
 
-static inline int ad5755_get_scale(struct ad5755_state *st,
-	struct iio_chan_spec const *chan)
-{
-	int min, max;
-
-	ad5755_get_min_max(st, chan, &min, &max);
-	return ((max - min) * 1000000000ULL) >> chan->scan_type.realbits;
-}
-
 static int ad5755_chan_reg_info(struct ad5755_state *st,
 	struct iio_chan_spec const *chan, long info, bool write,
 	unsigned int *reg, unsigned int *shift, unsigned int *offset)
@@ -303,13 +294,15 @@
 {
 	struct ad5755_state *st = iio_priv(indio_dev);
 	unsigned int reg, shift, offset;
+	int min, max;
 	int ret;
 
 	switch (info) {
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		*val2 = ad5755_get_scale(st, chan);
-		return IIO_VAL_INT_PLUS_NANO;
+		ad5755_get_min_max(st, chan, &min, &max);
+		*val = max - min;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = ad5755_get_offset(st, chan);
 		return IIO_VAL_INT;
@@ -386,6 +379,7 @@
 		.name = "powerdown",
 		.read = ad5755_read_powerdown,
 		.write = ad5755_write_powerdown,
+		.shared = IIO_SEPARATE,
 	},
 	{ },
 };
@@ -595,13 +589,7 @@
 	if (ret)
 		return ret;
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to register iio device: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int ad5755_remove(struct spi_device *spi)
diff --git a/drivers/iio/dac/ad5764.c b/drivers/iio/dac/ad5764.c
index df7e028..a8ff5b2 100644
--- a/drivers/iio/dac/ad5764.c
+++ b/drivers/iio/dac/ad5764.c
@@ -217,7 +217,6 @@
 	struct iio_chan_spec const *chan, int *val, int *val2, long info)
 {
 	struct ad5764_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
 	unsigned int reg;
 	int vref;
 	int ret;
@@ -245,15 +244,14 @@
 		*val = sign_extend32(*val, 5);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		/* vout = 4 * vref + ((dac_code / 65535) - 0.5) */
+		/* vout = 4 * vref + ((dac_code / 65536) - 0.5) */
 		vref = ad5764_get_channel_vref(st, chan->channel);
 		if (vref < 0)
 			return vref;
 
-		scale_uv = (vref * 4 * 100) >> chan->scan_type.realbits;
-		*val = scale_uv / 100000;
-		*val2 = (scale_uv % 100000) * 10;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = vref * 4 / 1000;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = -(1 << chan->scan_type.realbits) / 2;
 		return IIO_VAL_INT;
diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c
index ce74589..d64acbd 100644
--- a/drivers/iio/dac/ad5791.c
+++ b/drivers/iio/dac/ad5791.c
@@ -270,9 +270,9 @@
 		*val >>= chan->scan_type.shift;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		*val2 = (((u64)st->vref_mv) * 1000000ULL) >> chan->scan_type.realbits;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = st->vref_mv;
+		*val2 = (1 << chan->scan_type.realbits) - 1;
+		return IIO_VAL_FRACTIONAL;
 	case IIO_CHAN_INFO_OFFSET:
 		val64 = (((u64)st->vref_neg_mv) << chan->scan_type.realbits);
 		do_div(val64, st->vref_mv);
@@ -287,11 +287,12 @@
 static const struct iio_chan_spec_ext_info ad5791_ext_info[] = {
 	{
 		.name = "powerdown",
-		.shared = true,
+		.shared = IIO_SHARED_BY_TYPE,
 		.read = ad5791_read_dac_powerdown,
 		.write = ad5791_write_dac_powerdown,
 	},
-	IIO_ENUM("powerdown_mode", true, &ad5791_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE,
+		 &ad5791_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5791_powerdown_mode_enum),
 	{ },
 };
diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c
index ed2d276..d0505fd 100644
--- a/drivers/iio/dac/ad7303.c
+++ b/drivers/iio/dac/ad7303.c
@@ -169,6 +169,7 @@
 		.name = "powerdown",
 		.read = ad7303_read_dac_powerdown,
 		.write = ad7303_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
 	},
 	{ },
 };
diff --git a/drivers/iio/dac/max517.c b/drivers/iio/dac/max517.c
index 83adcbf..6e19035 100644
--- a/drivers/iio/dac/max517.c
+++ b/drivers/iio/dac/max517.c
@@ -82,15 +82,13 @@
 			   long m)
 {
 	struct max517_data *data = iio_priv(indio_dev);
-	unsigned int scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_SCALE:
 		/* Corresponds to Vref / 2^(bits) */
-		scale_uv = (data->vref_mv[chan->channel] * 1000) >> 8;
-		*val =  scale_uv / 1000000;
-		*val2 = scale_uv % 1000000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = data->vref_mv[chan->channel];
+		*val2 = 8;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	default:
 		break;
 	}
@@ -162,7 +160,6 @@
 	struct max517_data *data;
 	struct iio_dev *indio_dev;
 	struct max517_platform_data *platform_data = client->dev.platform_data;
-	int err;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
@@ -194,13 +191,7 @@
 		data->vref_mv[1] = platform_data->vref_mv[1];
 	}
 
-	err = iio_device_register(indio_dev);
-	if (err)
-		return err;
-
-	dev_info(&client->dev, "DAC registered\n");
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int max517_remove(struct i2c_client *client)
diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c
index 1397b6e..9f57ae8 100644
--- a/drivers/iio/dac/mcp4725.c
+++ b/drivers/iio/dac/mcp4725.c
@@ -195,8 +195,9 @@
 		.name = "powerdown",
 		.read = mcp4725_read_powerdown,
 		.write = mcp4725_write_powerdown,
+		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", false, &mcp4725_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SEPARATE, &mcp4725_powerdown_mode_enum),
 	IIO_ENUM_AVAILABLE("powerdown_mode", &mcp4725_powerdown_mode_enum),
 	{ },
 };
@@ -238,17 +239,15 @@
 			   int *val, int *val2, long mask)
 {
 	struct mcp4725_data *data = iio_priv(indio_dev);
-	unsigned long scale_uv;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		*val = data->dac_value;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (data->vref_mv * 1000) >> 12;
-		*val =  scale_uv / 1000000;
-		*val2 = scale_uv % 1000000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = data->vref_mv;
+		*val2 = 12;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -321,13 +320,7 @@
 	data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */
 	data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4);
 
-	err = iio_device_register(indio_dev);
-	if (err)
-		return err;
-
-	dev_info(&client->dev, "MCP4725 DAC registered\n");
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int mcp4725_remove(struct i2c_client *client)
diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
index 52605c0..63a25d9 100644
--- a/drivers/iio/frequency/adf4350.c
+++ b/drivers/iio/frequency/adf4350.c
@@ -351,6 +351,7 @@
 	.read = adf4350_read, \
 	.write = adf4350_write, \
 	.private = _ident, \
+	.shared = IIO_SEPARATE, \
 }
 
 static const struct iio_chan_spec_ext_info adf4350_ext_info[] = {
diff --git a/drivers/iio/gyro/adis16080.c b/drivers/iio/gyro/adis16080.c
index e9ec022..add5098 100644
--- a/drivers/iio/gyro/adis16080.c
+++ b/drivers/iio/gyro/adis16080.c
@@ -51,7 +51,6 @@
 		u16 addr, int *val)
 {
 	struct adis16080_state *st = iio_priv(indio_dev);
-	struct spi_message m;
 	int ret;
 	struct spi_transfer	t[] = {
 		{
@@ -66,11 +65,7 @@
 
 	st->buf = cpu_to_be16(addr | ADIS16080_DIN_WRITE);
 
-	spi_message_init(&m);
-	spi_message_add_tail(&t[0], &m);
-	spi_message_add_tail(&t[1], &m);
-
-	ret = spi_sync(st->us, &m);
+	ret = spi_sync_transfer(st->us, t, ARRAY_SIZE(t));
 	if (ret == 0)
 		*val = sign_extend32(be16_to_cpu(st->buf), 11);
 
diff --git a/drivers/iio/gyro/adis16130.c b/drivers/iio/gyro/adis16130.c
index ac66fc1..445c2ae 100644
--- a/drivers/iio/gyro/adis16130.c
+++ b/drivers/iio/gyro/adis16130.c
@@ -47,7 +47,6 @@
 {
 	int ret;
 	struct adis16130_state *st = iio_priv(indio_dev);
-	struct spi_message msg;
 	struct spi_transfer xfer = {
 		.tx_buf = st->buf,
 		.rx_buf = st->buf,
@@ -59,10 +58,7 @@
 	st->buf[0] = ADIS16130_CON_RD | reg_addr;
 	st->buf[1] = st->buf[2] = st->buf[3] = 0;
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->us, &msg);
-
+	ret = spi_sync_transfer(st->us, &xfer, 1);
 	if (ret == 0)
 		*val = (st->buf[1] << 16) | (st->buf[2] << 8) | st->buf[3];
 	mutex_unlock(&st->buf_lock);
@@ -103,7 +99,6 @@
 		default:
 			return -EINVAL;
 		}
-		break;
 	case IIO_CHAN_INFO_OFFSET:
 		switch (chan->type) {
 		case IIO_ANGL_VEL:
@@ -115,7 +110,6 @@
 		default:
 			return -EINVAL;
 		}
-		break;
 	}
 
 	return -EINVAL;
diff --git a/drivers/iio/gyro/adis16260.c b/drivers/iio/gyro/adis16260.c
index 0654116..22b6fb8 100644
--- a/drivers/iio/gyro/adis16260.c
+++ b/drivers/iio/gyro/adis16260.c
@@ -239,7 +239,6 @@
 		default:
 			return -EINVAL;
 		}
-		break;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = 250000 / 1453; /* 25 C = 0x00 */
 		return IIO_VAL_INT;
diff --git a/drivers/iio/gyro/adxrs450.c b/drivers/iio/gyro/adxrs450.c
index 6dab299..1e546ba 100644
--- a/drivers/iio/gyro/adxrs450.c
+++ b/drivers/iio/gyro/adxrs450.c
@@ -90,7 +90,6 @@
 				    u8 reg_address,
 				    u16 *val)
 {
-	struct spi_message msg;
 	struct adxrs450_state *st = iio_priv(indio_dev);
 	u32 tx;
 	int ret;
@@ -114,10 +113,7 @@
 		tx |= ADXRS450_P;
 
 	st->tx = cpu_to_be32(tx);
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfers[0], &msg);
-	spi_message_add_tail(&xfers[1], &msg);
-	ret = spi_sync(st->us, &msg);
+	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
 	if (ret) {
 		dev_err(&st->us->dev, "problem while reading 16 bit register 0x%02x\n",
 				reg_address);
@@ -169,7 +165,6 @@
  **/
 static int adxrs450_spi_sensor_data(struct iio_dev *indio_dev, s16 *val)
 {
-	struct spi_message msg;
 	struct adxrs450_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -188,10 +183,7 @@
 	mutex_lock(&st->buf_lock);
 	st->tx = cpu_to_be32(ADXRS450_SENSOR_DATA);
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfers[0], &msg);
-	spi_message_add_tail(&xfers[1], &msg);
-	ret = spi_sync(st->us, &msg);
+	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
 	if (ret) {
 		dev_err(&st->us->dev, "Problem while reading sensor data\n");
 		goto error_ret;
@@ -354,7 +346,6 @@
 		default:
 			return -EINVAL;
 		}
-		break;
 	case IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW:
 		ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_QUAD1, &t);
 		if (ret)
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index c688d97..ea01c6bc 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -182,10 +182,11 @@
 };
 
 /* Function to push data to buffer */
-static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
+	int len)
 {
 	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
-	iio_push_to_buffers(indio_dev, (u8 *)data);
+	iio_push_to_buffers(indio_dev, data);
 }
 
 /* Callback handler to send event after all samples are received and captured */
@@ -200,7 +201,7 @@
 				gyro_state->common_attributes.data_ready);
 	if (gyro_state->common_attributes.data_ready)
 		hid_sensor_push_data(indio_dev,
-				(u8 *)gyro_state->gyro_val,
+				gyro_state->gyro_val,
 				sizeof(gyro_state->gyro_val));
 
 	return 0;
diff --git a/drivers/iio/gyro/itg3200_buffer.c b/drivers/iio/gyro/itg3200_buffer.c
index 6c43af9..e3b3c50 100644
--- a/drivers/iio/gyro/itg3200_buffer.c
+++ b/drivers/iio/gyro/itg3200_buffer.c
@@ -55,11 +55,8 @@
 	if (ret < 0)
 		goto error_ret;
 
-	if (indio_dev->scan_timestamp)
-		memcpy(buf + indio_dev->scan_bytes - sizeof(s64),
-				&pf->timestamp, sizeof(pf->timestamp));
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, pf->timestamp);
 
-	iio_push_to_buffers(indio_dev, (u8 *)buf);
 	iio_trigger_notify_done(indio_dev->trig);
 
 error_ret:
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
index 69017c7..d67b17b 100644
--- a/drivers/iio/gyro/st_gyro_buffer.c
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -32,16 +32,7 @@
 
 static int st_gyro_buffer_preenable(struct iio_dev *indio_dev)
 {
-	int err;
-
-	err = st_sensors_set_enable(indio_dev, true);
-	if (err < 0)
-		goto st_gyro_set_enable_error;
-
-	err = iio_sw_buffer_preenable(indio_dev);
-
-st_gyro_set_enable_error:
-	return err;
+	return st_sensors_set_enable(indio_dev, true);
 }
 
 static int st_gyro_buffer_postenable(struct iio_dev *indio_dev)
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index e13c2b0..d53d91a 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -305,8 +305,9 @@
 int st_gyro_common_probe(struct iio_dev *indio_dev,
 					struct st_sensors_platform_data *pdata)
 {
-	int err;
 	struct st_sensor_data *gdata = iio_priv(indio_dev);
+	int irq = gdata->get_irq_data_ready(indio_dev);
+	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &gyro_info;
@@ -314,7 +315,7 @@
 	err = st_sensors_check_device_support(indio_dev,
 				ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
 	if (err < 0)
-		goto st_gyro_common_probe_error;
+		return err;
 
 	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
 	gdata->multiread_bit = gdata->sensor->multi_read_bit;
@@ -327,13 +328,13 @@
 
 	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
-		goto st_gyro_common_probe_error;
+		return err;
 
-	if (gdata->get_irq_data_ready(indio_dev) > 0) {
-		err = st_gyro_allocate_ring(indio_dev);
-		if (err < 0)
-			goto st_gyro_common_probe_error;
+	err = st_gyro_allocate_ring(indio_dev);
+	if (err < 0)
+		return err;
 
+	if (irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						  ST_GYRO_TRIGGER_OPS);
 		if (err < 0)
@@ -344,15 +345,14 @@
 	if (err)
 		goto st_gyro_device_register_error;
 
-	return err;
+	return 0;
 
 st_gyro_device_register_error:
-	if (gdata->get_irq_data_ready(indio_dev) > 0)
+	if (irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_gyro_probe_trigger_error:
-	if (gdata->get_irq_data_ready(indio_dev) > 0)
-		st_gyro_deallocate_ring(indio_dev);
-st_gyro_common_probe_error:
+	st_gyro_deallocate_ring(indio_dev);
+
 	return err;
 }
 EXPORT_SYMBOL(st_gyro_common_probe);
@@ -362,10 +362,10 @@
 	struct st_sensor_data *gdata = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (gdata->get_irq_data_ready(indio_dev) > 0) {
+	if (gdata->get_irq_data_ready(indio_dev) > 0)
 		st_sensors_deallocate_trigger(indio_dev);
-		st_gyro_deallocate_ring(indio_dev);
-	}
+
+	st_gyro_deallocate_ring(indio_dev);
 }
 EXPORT_SYMBOL(st_gyro_common_remove);
 
diff --git a/drivers/iio/iio_core.h b/drivers/iio/iio_core.h
index 9b32253..f6db6af 100644
--- a/drivers/iio/iio_core.h
+++ b/drivers/iio/iio_core.h
@@ -30,9 +30,12 @@
 						const char *buf,
 						size_t len),
 			   u64 mask,
-			   bool generic,
+			   enum iio_shared_by shared_by,
 			   struct device *dev,
 			   struct list_head *attr_list);
+void iio_free_chan_devattr_list(struct list_head *attr_list);
+
+ssize_t iio_format_value(char *buf, unsigned int type, int val, int val2);
 
 /* Event interface flags */
 #define IIO_BUSY_BIT_POS 1
@@ -50,6 +53,7 @@
 #define iio_buffer_read_first_n_outer_addr (&iio_buffer_read_first_n_outer)
 
 void iio_disable_all_buffers(struct iio_dev *indio_dev);
+void iio_buffer_wakeup_poll(struct iio_dev *indio_dev);
 
 #else
 
@@ -57,11 +61,13 @@
 #define iio_buffer_read_first_n_outer_addr NULL
 
 static inline void iio_disable_all_buffers(struct iio_dev *indio_dev) {}
+static inline void iio_buffer_wakeup_poll(struct iio_dev *indio_dev) {}
 
 #endif
 
 int iio_device_register_eventset(struct iio_dev *indio_dev);
 void iio_device_unregister_eventset(struct iio_dev *indio_dev);
+void iio_device_wakeup_eventset(struct iio_dev *indio_dev);
 int iio_event_getfd(struct iio_dev *indio_dev);
 
 #endif
diff --git a/drivers/iio/imu/adis16400_buffer.c b/drivers/iio/imu/adis16400_buffer.c
index 054c01d..f2cf829 100644
--- a/drivers/iio/imu/adis16400_buffer.c
+++ b/drivers/iio/imu/adis16400_buffer.c
@@ -82,13 +82,8 @@
 		spi_setup(st->adis.spi);
 	}
 
-	/* Guaranteed to be aligned with 8 byte boundary */
-	if (indio_dev->scan_timestamp) {
-		void *b = adis->buffer + indio_dev->scan_bytes - sizeof(s64);
-		*(s64 *)b = pf->timestamp;
-	}
-
-	iio_push_to_buffers(indio_dev, adis->buffer);
+	iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
+		pf->timestamp);
 
 	iio_trigger_notify_done(indio_dev->trig);
 
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 99d8e0b..cb32b59 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -102,13 +102,8 @@
 		mutex_unlock(&adis->txrx_lock);
 	}
 
-	/* Guaranteed to be aligned with 8 byte boundary */
-	if (indio_dev->scan_timestamp) {
-		void *b = adis->buffer + indio_dev->scan_bytes - sizeof(s64);
-		*(s64 *)b = pf->timestamp;
-	}
-
-	iio_push_to_buffers(indio_dev, adis->buffer);
+	iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
+		pf->timestamp);
 
 	iio_trigger_notify_done(indio_dev->trig);
 
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 7da0832..4295171 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -124,7 +124,6 @@
 	u8 data[INV_MPU6050_OUTPUT_DATA_SIZE];
 	u16 fifo_count;
 	s64 timestamp;
-	u64 *tmp;
 
 	mutex_lock(&indio_dev->mlock);
 	if (!(st->chip_config.accl_fifo_enable |
@@ -170,9 +169,8 @@
 		if (0 == result)
 			timestamp = 0;
 
-		tmp = (u64 *)data;
-		tmp[DIV_ROUND_UP(bytes_per_datum, 8)] = timestamp;
-		result = iio_push_to_buffers(indio_dev, data);
+		result = iio_push_to_buffers_with_timestamp(indio_dev, data,
+			timestamp);
 		if (result)
 			goto flush_fifo;
 		fifo_count -= bytes_per_datum;
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 2db7dcd..7f9152c 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -20,6 +20,7 @@
 #include <linux/cdev.h>
 #include <linux/slab.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 
 #include <linux/iio/iio.h>
 #include "iio_core.h"
@@ -31,16 +32,9 @@
 	[IIO_LE] = "le",
 };
 
-static bool iio_buffer_is_active(struct iio_dev *indio_dev,
-				 struct iio_buffer *buf)
+static bool iio_buffer_is_active(struct iio_buffer *buf)
 {
-	struct list_head *p;
-
-	list_for_each(p, &indio_dev->buffer_list)
-		if (p == &buf->buffer_list)
-			return true;
-
-	return false;
+	return !list_empty(&buf->buffer_list);
 }
 
 /**
@@ -55,6 +49,9 @@
 	struct iio_dev *indio_dev = filp->private_data;
 	struct iio_buffer *rb = indio_dev->buffer;
 
+	if (!indio_dev->info)
+		return -ENODEV;
+
 	if (!rb || !rb->access->read_first_n)
 		return -EINVAL;
 	return rb->access->read_first_n(rb, n, buf);
@@ -69,6 +66,9 @@
 	struct iio_dev *indio_dev = filp->private_data;
 	struct iio_buffer *rb = indio_dev->buffer;
 
+	if (!indio_dev->info)
+		return -ENODEV;
+
 	poll_wait(filp, &rb->pollq, wait);
 	if (rb->stufftoread)
 		return POLLIN | POLLRDNORM;
@@ -76,10 +76,27 @@
 	return 0;
 }
 
+/**
+ * iio_buffer_wakeup_poll - Wakes up the buffer waitqueue
+ * @indio_dev: The IIO device
+ *
+ * Wakes up the event waitqueue used for poll(). Should usually
+ * be called when the device is unregistered.
+ */
+void iio_buffer_wakeup_poll(struct iio_dev *indio_dev)
+{
+	if (!indio_dev->buffer)
+		return;
+
+	wake_up(&indio_dev->buffer->pollq);
+}
+
 void iio_buffer_init(struct iio_buffer *buffer)
 {
 	INIT_LIST_HEAD(&buffer->demux_list);
+	INIT_LIST_HEAD(&buffer->buffer_list);
 	init_waitqueue_head(&buffer->pollq);
+	kref_init(&buffer->ref);
 }
 EXPORT_SYMBOL(iio_buffer_init);
 
@@ -146,7 +163,7 @@
 	if (ret < 0)
 		return ret;
 	mutex_lock(&indio_dev->mlock);
-	if (iio_buffer_is_active(indio_dev, indio_dev->buffer)) {
+	if (iio_buffer_is_active(indio_dev->buffer)) {
 		ret = -EBUSY;
 		goto error_ret;
 	}
@@ -192,7 +209,7 @@
 		return ret;
 
 	mutex_lock(&indio_dev->mlock);
-	if (iio_buffer_is_active(indio_dev, indio_dev->buffer)) {
+	if (iio_buffer_is_active(indio_dev->buffer)) {
 		ret = -EBUSY;
 		goto error_ret;
 	}
@@ -214,7 +231,7 @@
 				     &iio_show_scan_index,
 				     NULL,
 				     0,
-				     0,
+				     IIO_SEPARATE,
 				     &indio_dev->dev,
 				     &buffer->scan_el_dev_attr_list);
 	if (ret)
@@ -249,29 +266,14 @@
 					     0,
 					     &indio_dev->dev,
 					     &buffer->scan_el_dev_attr_list);
+	if (ret)
+		goto error_ret;
 	attrcount++;
 	ret = attrcount;
 error_ret:
 	return ret;
 }
 
-static void iio_buffer_remove_and_free_scan_dev_attr(struct iio_dev *indio_dev,
-						     struct iio_dev_attr *p)
-{
-	kfree(p->dev_attr.attr.name);
-	kfree(p);
-}
-
-static void __iio_buffer_attr_cleanup(struct iio_dev *indio_dev)
-{
-	struct iio_dev_attr *p, *n;
-	struct iio_buffer *buffer = indio_dev->buffer;
-
-	list_for_each_entry_safe(p, n,
-				 &buffer->scan_el_dev_attr_list, l)
-		iio_buffer_remove_and_free_scan_dev_attr(indio_dev, p);
-}
-
 static const char * const iio_scan_elements_group_name = "scan_elements";
 
 int iio_buffer_register(struct iio_dev *indio_dev,
@@ -348,7 +350,7 @@
 error_free_scan_mask:
 	kfree(buffer->scan_mask);
 error_cleanup_dynamic:
-	__iio_buffer_attr_cleanup(indio_dev);
+	iio_free_chan_devattr_list(&buffer->scan_el_dev_attr_list);
 
 	return ret;
 }
@@ -358,7 +360,7 @@
 {
 	kfree(indio_dev->buffer->scan_mask);
 	kfree(indio_dev->buffer->scan_el_group.attrs);
-	__iio_buffer_attr_cleanup(indio_dev);
+	iio_free_chan_devattr_list(&indio_dev->buffer->scan_el_dev_attr_list);
 }
 EXPORT_SYMBOL(iio_buffer_unregister);
 
@@ -396,7 +398,7 @@
 			return len;
 
 	mutex_lock(&indio_dev->mlock);
-	if (iio_buffer_is_active(indio_dev, indio_dev->buffer)) {
+	if (iio_buffer_is_active(indio_dev->buffer)) {
 		ret = -EBUSY;
 	} else {
 		if (buffer->access->set_length)
@@ -414,13 +416,11 @@
 			       char *buf)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	return sprintf(buf, "%d\n",
-		       iio_buffer_is_active(indio_dev,
-					    indio_dev->buffer));
+	return sprintf(buf, "%d\n", iio_buffer_is_active(indio_dev->buffer));
 }
 EXPORT_SYMBOL(iio_buffer_show_enable);
 
-/* note NULL used as error indicator as it doesn't make sense. */
+/* Note NULL used as error indicator as it doesn't make sense. */
 static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
 					  unsigned int masklength,
 					  const unsigned long *mask)
@@ -435,8 +435,8 @@
 	return NULL;
 }
 
-static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const long *mask,
-				  bool timestamp)
+static int iio_compute_scan_bytes(struct iio_dev *indio_dev,
+				const unsigned long *mask, bool timestamp)
 {
 	const struct iio_chan_spec *ch;
 	unsigned bytes = 0;
@@ -460,6 +460,19 @@
 	return bytes;
 }
 
+static void iio_buffer_activate(struct iio_dev *indio_dev,
+	struct iio_buffer *buffer)
+{
+	iio_buffer_get(buffer);
+	list_add(&buffer->buffer_list, &indio_dev->buffer_list);
+}
+
+static void iio_buffer_deactivate(struct iio_buffer *buffer)
+{
+	list_del_init(&buffer->buffer_list);
+	iio_buffer_put(buffer);
+}
+
 void iio_disable_all_buffers(struct iio_dev *indio_dev)
 {
 	struct iio_buffer *buffer, *_buffer;
@@ -472,7 +485,7 @@
 
 	list_for_each_entry_safe(buffer, _buffer,
 			&indio_dev->buffer_list, buffer_list)
-		list_del_init(&buffer->buffer_list);
+		iio_buffer_deactivate(buffer);
 
 	indio_dev->currentmode = INDIO_DIRECT_MODE;
 	if (indio_dev->setup_ops->postdisable)
@@ -482,7 +495,21 @@
 		kfree(indio_dev->active_scan_mask);
 }
 
-int iio_update_buffers(struct iio_dev *indio_dev,
+static void iio_buffer_update_bytes_per_datum(struct iio_dev *indio_dev,
+	struct iio_buffer *buffer)
+{
+	unsigned int bytes;
+
+	if (!buffer->access->set_bytes_per_datum)
+		return;
+
+	bytes = iio_compute_scan_bytes(indio_dev, buffer->scan_mask,
+		buffer->scan_timestamp);
+
+	buffer->access->set_bytes_per_datum(buffer, bytes);
+}
+
+static int __iio_update_buffers(struct iio_dev *indio_dev,
 		       struct iio_buffer *insert_buffer,
 		       struct iio_buffer *remove_buffer)
 {
@@ -512,9 +539,9 @@
 		indio_dev->active_scan_mask = NULL;
 
 	if (remove_buffer)
-		list_del(&remove_buffer->buffer_list);
+		iio_buffer_deactivate(remove_buffer);
 	if (insert_buffer)
-		list_add(&insert_buffer->buffer_list, &indio_dev->buffer_list);
+		iio_buffer_activate(indio_dev, insert_buffer);
 
 	/* If no buffers in list, we are done */
 	if (list_empty(&indio_dev->buffer_list)) {
@@ -524,7 +551,7 @@
 		return 0;
 	}
 
-	/* What scan mask do we actually have ?*/
+	/* What scan mask do we actually have? */
 	compound_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
 				sizeof(long), GFP_KERNEL);
 	if (compound_mask == NULL) {
@@ -549,7 +576,7 @@
 			 * Roll back.
 			 * Note can only occur when adding a buffer.
 			 */
-			list_del(&insert_buffer->buffer_list);
+			iio_buffer_deactivate(insert_buffer);
 			if (old_mask) {
 				indio_dev->active_scan_mask = old_mask;
 				success = -EINVAL;
@@ -579,7 +606,8 @@
 		iio_compute_scan_bytes(indio_dev,
 				       indio_dev->active_scan_mask,
 				       indio_dev->scan_timestamp);
-	list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list)
+	list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
+		iio_buffer_update_bytes_per_datum(indio_dev, buffer);
 		if (buffer->access->request_update) {
 			ret = buffer->access->request_update(buffer);
 			if (ret) {
@@ -588,6 +616,7 @@
 				goto error_run_postdisable;
 			}
 		}
+	}
 	if (indio_dev->info->update_scan_mode) {
 		ret = indio_dev->info
 			->update_scan_mode(indio_dev,
@@ -597,7 +626,7 @@
 			goto error_run_postdisable;
 		}
 	}
-	/* Definitely possible for devices to support both of these.*/
+	/* Definitely possible for devices to support both of these. */
 	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) {
 		if (!indio_dev->trig) {
 			printk(KERN_INFO "Buffer not started: no trigger\n");
@@ -608,7 +637,7 @@
 		indio_dev->currentmode = INDIO_BUFFER_TRIGGERED;
 	} else if (indio_dev->modes & INDIO_BUFFER_HARDWARE) {
 		indio_dev->currentmode = INDIO_BUFFER_HARDWARE;
-	} else { /* should never be reached */
+	} else { /* Should never be reached */
 		ret = -EINVAL;
 		goto error_run_postdisable;
 	}
@@ -640,13 +669,50 @@
 error_remove_inserted:
 
 	if (insert_buffer)
-		list_del(&insert_buffer->buffer_list);
+		iio_buffer_deactivate(insert_buffer);
 	indio_dev->active_scan_mask = old_mask;
 	kfree(compound_mask);
 error_ret:
 
 	return ret;
 }
+
+int iio_update_buffers(struct iio_dev *indio_dev,
+		       struct iio_buffer *insert_buffer,
+		       struct iio_buffer *remove_buffer)
+{
+	int ret;
+
+	if (insert_buffer == remove_buffer)
+		return 0;
+
+	mutex_lock(&indio_dev->info_exist_lock);
+	mutex_lock(&indio_dev->mlock);
+
+	if (insert_buffer && iio_buffer_is_active(insert_buffer))
+		insert_buffer = NULL;
+
+	if (remove_buffer && !iio_buffer_is_active(remove_buffer))
+		remove_buffer = NULL;
+
+	if (!insert_buffer && !remove_buffer) {
+		ret = 0;
+		goto out_unlock;
+	}
+
+	if (indio_dev->info == NULL) {
+		ret = -ENODEV;
+		goto out_unlock;
+	}
+
+	ret = __iio_update_buffers(indio_dev, insert_buffer, remove_buffer);
+
+out_unlock:
+	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&indio_dev->info_exist_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL_GPL(iio_update_buffers);
 
 ssize_t iio_buffer_store_enable(struct device *dev,
@@ -657,7 +723,6 @@
 	int ret;
 	bool requested_state;
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct iio_buffer *pbuf = indio_dev->buffer;
 	bool inlist;
 
 	ret = strtobool(buf, &requested_state);
@@ -667,16 +732,16 @@
 	mutex_lock(&indio_dev->mlock);
 
 	/* Find out if it is in the list */
-	inlist = iio_buffer_is_active(indio_dev, pbuf);
+	inlist = iio_buffer_is_active(indio_dev->buffer);
 	/* Already in desired state */
 	if (inlist == requested_state)
 		goto done;
 
 	if (requested_state)
-		ret = iio_update_buffers(indio_dev,
+		ret = __iio_update_buffers(indio_dev,
 					 indio_dev->buffer, NULL);
 	else
-		ret = iio_update_buffers(indio_dev,
+		ret = __iio_update_buffers(indio_dev,
 					 NULL, indio_dev->buffer);
 
 	if (ret < 0)
@@ -687,24 +752,6 @@
 }
 EXPORT_SYMBOL(iio_buffer_store_enable);
 
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
-{
-	struct iio_buffer *buffer;
-	unsigned bytes;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-
-	list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list)
-		if (buffer->access->set_bytes_per_datum) {
-			bytes = iio_compute_scan_bytes(indio_dev,
-						       buffer->scan_mask,
-						       buffer->scan_timestamp);
-
-			buffer->access->set_bytes_per_datum(buffer, bytes);
-		}
-	return 0;
-}
-EXPORT_SYMBOL(iio_sw_buffer_preenable);
-
 /**
  * iio_validate_scan_mask_onehot() - Validates that exactly one channel is selected
  * @indio_dev: the iio device
@@ -732,6 +779,7 @@
 
 /**
  * iio_scan_mask_set() - set particular bit in the scan mask
+ * @indio_dev: the iio device
  * @buffer: the buffer whose scan mask we are interested in
  * @bit: the bit to be set.
  *
@@ -752,7 +800,7 @@
 	if (trialmask == NULL)
 		return -ENOMEM;
 	if (!indio_dev->masklength) {
-		WARN_ON("trying to set scanmask prior to registering buffer\n");
+		WARN_ON("Trying to set scanmask prior to registering buffer\n");
 		goto err_invalid_mask;
 	}
 	bitmap_copy(trialmask, buffer->scan_mask, indio_dev->masklength);
@@ -807,8 +855,8 @@
 	struct list_head l;
 };
 
-static unsigned char *iio_demux(struct iio_buffer *buffer,
-				 unsigned char *datain)
+static const void *iio_demux(struct iio_buffer *buffer,
+				 const void *datain)
 {
 	struct iio_demux_table *t;
 
@@ -821,9 +869,9 @@
 	return buffer->demux_bounce;
 }
 
-static int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data)
+static int iio_push_to_buffer(struct iio_buffer *buffer, const void *data)
 {
-	unsigned char *dataout = iio_demux(buffer, data);
+	const void *dataout = iio_demux(buffer, data);
 
 	return buffer->access->store_to(buffer, dataout);
 }
@@ -838,7 +886,7 @@
 }
 
 
-int iio_push_to_buffers(struct iio_dev *indio_dev, unsigned char *data)
+int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data)
 {
 	int ret;
 	struct iio_buffer *buf;
@@ -961,3 +1009,45 @@
 	return ret;
 }
 EXPORT_SYMBOL_GPL(iio_update_demux);
+
+/**
+ * iio_buffer_release() - Free a buffer's resources
+ * @ref: Pointer to the kref embedded in the iio_buffer struct
+ *
+ * This function is called when the last reference to the buffer has been
+ * dropped. It will typically free all resources allocated by the buffer. Do not
+ * call this function manually, always use iio_buffer_put() when done using a
+ * buffer.
+ */
+static void iio_buffer_release(struct kref *ref)
+{
+	struct iio_buffer *buffer = container_of(ref, struct iio_buffer, ref);
+
+	buffer->access->release(buffer);
+}
+
+/**
+ * iio_buffer_get() - Grab a reference to the buffer
+ * @buffer: The buffer to grab a reference for, may be NULL
+ *
+ * Returns the pointer to the buffer that was passed into the function.
+ */
+struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer)
+{
+	if (buffer)
+		kref_get(&buffer->ref);
+
+	return buffer;
+}
+EXPORT_SYMBOL_GPL(iio_buffer_get);
+
+/**
+ * iio_buffer_put() - Release the reference to the buffer
+ * @buffer: The buffer to release the reference for, may be NULL
+ */
+void iio_buffer_put(struct iio_buffer *buffer)
+{
+	if (buffer)
+		kref_put(&buffer->ref, iio_buffer_release);
+}
+EXPORT_SYMBOL_GPL(iio_buffer_put);
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index f95c697..18f72e3 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -9,6 +9,8 @@
  * Based on elements of hwmon and input subsystems.
  */
 
+#define pr_fmt(fmt) "iio-core: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/idr.h>
@@ -28,6 +30,7 @@
 #include "iio_core_trigger.h"
 #include <linux/iio/sysfs.h>
 #include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 
 /* IDA to assign each registered device a unique id */
 static DEFINE_IDA(iio_ida);
@@ -101,6 +104,7 @@
 	[IIO_CHAN_INFO_PHASE] = "phase",
 	[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",
 	[IIO_CHAN_INFO_HYSTERESIS] = "hysteresis",
+	[IIO_CHAN_INFO_INT_TIME] = "integration_time",
 };
 
 const struct iio_chan_spec
@@ -130,16 +134,13 @@
 	/* Register sysfs bus */
 	ret  = bus_register(&iio_bus_type);
 	if (ret < 0) {
-		printk(KERN_ERR
-		       "%s could not register bus type\n",
-			__FILE__);
+		pr_err("could not register bus type\n");
 		goto error_nothing;
 	}
 
 	ret = alloc_chrdev_region(&iio_devt, 0, IIO_DEV_MAX, "iio");
 	if (ret < 0) {
-		printk(KERN_ERR "%s: failed to allocate char dev region\n",
-		       __FILE__);
+		pr_err("failed to allocate char dev region\n");
 		goto error_unregister_bus_type;
 	}
 
@@ -361,22 +362,20 @@
 }
 EXPORT_SYMBOL_GPL(iio_enum_write);
 
-static ssize_t iio_read_channel_info(struct device *dev,
-				     struct device_attribute *attr,
-				     char *buf)
+/**
+ * iio_format_value() - Formats a IIO value into its string representation
+ * @buf: The buffer to which the formated value gets written
+ * @type: One of the IIO_VAL_... constants. This decides how the val and val2
+ *        parameters are formatted.
+ * @val: First part of the value, exact meaning depends on the type parameter.
+ * @val2: Second part of the value, exact meaning depends on the type parameter.
+ */
+ssize_t iio_format_value(char *buf, unsigned int type, int val, int val2)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned long long tmp;
-	int val, val2;
 	bool scale_db = false;
-	int ret = indio_dev->info->read_raw(indio_dev, this_attr->c,
-					    &val, &val2, this_attr->address);
 
-	if (ret < 0)
-		return ret;
-
-	switch (ret) {
+	switch (type) {
 	case IIO_VAL_INT:
 		return sprintf(buf, "%d\n", val);
 	case IIO_VAL_INT_PLUS_MICRO_DB:
@@ -408,6 +407,22 @@
 	}
 }
 
+static ssize_t iio_read_channel_info(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int val, val2;
+	int ret = indio_dev->info->read_raw(indio_dev, this_attr->c,
+					    &val, &val2, this_attr->address);
+
+	if (ret < 0)
+		return ret;
+
+	return iio_format_value(buf, ret, val, val2);
+}
+
 /**
  * iio_str_to_fixpoint() - Parse a fixed-point number from a string
  * @str: The string to parse
@@ -516,14 +531,15 @@
 						struct device_attribute *attr,
 						const char *buf,
 						size_t len),
-			   bool generic)
+			   enum iio_shared_by shared_by)
 {
-	int ret;
-	char *name_format, *full_postfix;
+	int ret = 0;
+	char *name_format = NULL;
+	char *full_postfix;
 	sysfs_attr_init(&dev_attr->attr);
 
 	/* Build up postfix of <extend_name>_<modifier>_postfix */
-	if (chan->modified && !generic) {
+	if (chan->modified && (shared_by == IIO_SEPARATE)) {
 		if (chan->extend_name)
 			full_postfix = kasprintf(GFP_KERNEL, "%s_%s_%s",
 						 iio_modifier_names[chan
@@ -544,53 +560,78 @@
 						 chan->extend_name,
 						 postfix);
 	}
-	if (full_postfix == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	if (full_postfix == NULL)
+		return -ENOMEM;
 
 	if (chan->differential) { /* Differential can not have modifier */
-		if (generic)
+		switch (shared_by) {
+		case IIO_SHARED_BY_ALL:
+			name_format = kasprintf(GFP_KERNEL, "%s", full_postfix);
+			break;
+		case IIO_SHARED_BY_DIR:
+			name_format = kasprintf(GFP_KERNEL, "%s_%s",
+						iio_direction[chan->output],
+						full_postfix);
+			break;
+		case IIO_SHARED_BY_TYPE:
 			name_format
 				= kasprintf(GFP_KERNEL, "%s_%s-%s_%s",
 					    iio_direction[chan->output],
 					    iio_chan_type_name_spec[chan->type],
 					    iio_chan_type_name_spec[chan->type],
 					    full_postfix);
-		else if (chan->indexed)
+			break;
+		case IIO_SEPARATE:
+			if (!chan->indexed) {
+				WARN_ON("Differential channels must be indexed\n");
+				ret = -EINVAL;
+				goto error_free_full_postfix;
+			}
 			name_format
-				= kasprintf(GFP_KERNEL, "%s_%s%d-%s%d_%s",
+				= kasprintf(GFP_KERNEL,
+					    "%s_%s%d-%s%d_%s",
 					    iio_direction[chan->output],
 					    iio_chan_type_name_spec[chan->type],
 					    chan->channel,
 					    iio_chan_type_name_spec[chan->type],
 					    chan->channel2,
 					    full_postfix);
-		else {
-			WARN_ON("Differential channels must be indexed\n");
-			ret = -EINVAL;
-			goto error_free_full_postfix;
+			break;
 		}
 	} else { /* Single ended */
-		if (generic)
+		switch (shared_by) {
+		case IIO_SHARED_BY_ALL:
+			name_format = kasprintf(GFP_KERNEL, "%s", full_postfix);
+			break;
+		case IIO_SHARED_BY_DIR:
+			name_format = kasprintf(GFP_KERNEL, "%s_%s",
+						iio_direction[chan->output],
+						full_postfix);
+			break;
+		case IIO_SHARED_BY_TYPE:
 			name_format
 				= kasprintf(GFP_KERNEL, "%s_%s_%s",
 					    iio_direction[chan->output],
 					    iio_chan_type_name_spec[chan->type],
 					    full_postfix);
-		else if (chan->indexed)
-			name_format
-				= kasprintf(GFP_KERNEL, "%s_%s%d_%s",
-					    iio_direction[chan->output],
-					    iio_chan_type_name_spec[chan->type],
-					    chan->channel,
-					    full_postfix);
-		else
-			name_format
-				= kasprintf(GFP_KERNEL, "%s_%s_%s",
-					    iio_direction[chan->output],
-					    iio_chan_type_name_spec[chan->type],
-					    full_postfix);
+			break;
+
+		case IIO_SEPARATE:
+			if (chan->indexed)
+				name_format
+					= kasprintf(GFP_KERNEL, "%s_%s%d_%s",
+						    iio_direction[chan->output],
+						    iio_chan_type_name_spec[chan->type],
+						    chan->channel,
+						    full_postfix);
+			else
+				name_format
+					= kasprintf(GFP_KERNEL, "%s_%s_%s",
+						    iio_direction[chan->output],
+						    iio_chan_type_name_spec[chan->type],
+						    full_postfix);
+			break;
+		}
 	}
 	if (name_format == NULL) {
 		ret = -ENOMEM;
@@ -614,16 +655,11 @@
 		dev_attr->attr.mode |= S_IWUSR;
 		dev_attr->store = writefunc;
 	}
-	kfree(name_format);
-	kfree(full_postfix);
-
-	return 0;
-
 error_free_name_format:
 	kfree(name_format);
 error_free_full_postfix:
 	kfree(full_postfix);
-error_ret:
+
 	return ret;
 }
 
@@ -642,21 +678,21 @@
 						const char *buf,
 						size_t len),
 			   u64 mask,
-			   bool generic,
+			   enum iio_shared_by shared_by,
 			   struct device *dev,
 			   struct list_head *attr_list)
 {
 	int ret;
 	struct iio_dev_attr *iio_attr, *t;
 
-	iio_attr = kzalloc(sizeof *iio_attr, GFP_KERNEL);
+	iio_attr = kzalloc(sizeof(*iio_attr), GFP_KERNEL);
 	if (iio_attr == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
 	}
 	ret = __iio_device_attr_init(&iio_attr->dev_attr,
 				     postfix, chan,
-				     readfunc, writefunc, generic);
+				     readfunc, writefunc, shared_by);
 	if (ret)
 		goto error_iio_dev_attr_free;
 	iio_attr->c = chan;
@@ -664,7 +700,7 @@
 	list_for_each_entry(t, attr_list, l)
 		if (strcmp(t->dev_attr.attr.name,
 			   iio_attr->dev_attr.attr.name) == 0) {
-			if (!generic)
+			if (shared_by == IIO_SEPARATE)
 				dev_err(dev, "tried to double register : %s\n",
 					t->dev_attr.attr.name);
 			ret = -EBUSY;
@@ -682,45 +718,67 @@
 	return ret;
 }
 
+static int iio_device_add_info_mask_type(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 enum iio_shared_by shared_by,
+					 const long *infomask)
+{
+	int i, ret, attrcount = 0;
+
+	for_each_set_bit(i, infomask, sizeof(infomask)*8) {
+		ret = __iio_add_chan_devattr(iio_chan_info_postfix[i],
+					     chan,
+					     &iio_read_channel_info,
+					     &iio_write_channel_info,
+					     i,
+					     shared_by,
+					     &indio_dev->dev,
+					     &indio_dev->channel_attr_list);
+		if ((ret == -EBUSY) && (shared_by != IIO_SEPARATE))
+			continue;
+		else if (ret < 0)
+			return ret;
+		attrcount++;
+	}
+
+	return attrcount;
+}
+
 static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
 					struct iio_chan_spec const *chan)
 {
 	int ret, attrcount = 0;
-	int i;
 	const struct iio_chan_spec_ext_info *ext_info;
 
 	if (chan->channel < 0)
 		return 0;
-	for_each_set_bit(i, &chan->info_mask_separate, sizeof(long)*8) {
-		ret = __iio_add_chan_devattr(iio_chan_info_postfix[i],
-					     chan,
-					     &iio_read_channel_info,
-					     &iio_write_channel_info,
-					     i,
-					     0,
-					     &indio_dev->dev,
-					     &indio_dev->channel_attr_list);
-		if (ret < 0)
-			goto error_ret;
-		attrcount++;
-	}
-	for_each_set_bit(i, &chan->info_mask_shared_by_type, sizeof(long)*8) {
-		ret = __iio_add_chan_devattr(iio_chan_info_postfix[i],
-					     chan,
-					     &iio_read_channel_info,
-					     &iio_write_channel_info,
-					     i,
-					     1,
-					     &indio_dev->dev,
-					     &indio_dev->channel_attr_list);
-		if (ret == -EBUSY) {
-			ret = 0;
-			continue;
-		} else if (ret < 0) {
-			goto error_ret;
-		}
-		attrcount++;
-	}
+	ret = iio_device_add_info_mask_type(indio_dev, chan,
+					    IIO_SEPARATE,
+					    &chan->info_mask_separate);
+	if (ret < 0)
+		return ret;
+	attrcount += ret;
+
+	ret = iio_device_add_info_mask_type(indio_dev, chan,
+					    IIO_SHARED_BY_TYPE,
+					    &chan->info_mask_shared_by_type);
+	if (ret < 0)
+		return ret;
+	attrcount += ret;
+
+	ret = iio_device_add_info_mask_type(indio_dev, chan,
+					    IIO_SHARED_BY_DIR,
+					    &chan->info_mask_shared_by_dir);
+	if (ret < 0)
+		return ret;
+	attrcount += ret;
+
+	ret = iio_device_add_info_mask_type(indio_dev, chan,
+					    IIO_SHARED_BY_ALL,
+					    &chan->info_mask_shared_by_all);
+	if (ret < 0)
+		return ret;
+	attrcount += ret;
 
 	if (chan->ext_info) {
 		unsigned int i = 0;
@@ -740,22 +798,31 @@
 				continue;
 
 			if (ret)
-				goto error_ret;
+				return ret;
 
 			attrcount++;
 		}
 	}
 
-	ret = attrcount;
-error_ret:
-	return ret;
+	return attrcount;
 }
 
-static void iio_device_remove_and_free_read_attr(struct iio_dev *indio_dev,
-						 struct iio_dev_attr *p)
+/**
+ * iio_free_chan_devattr_list() - Free a list of IIO device attributes
+ * @attr_list: List of IIO device attributes
+ *
+ * This function frees the memory allocated for each of the IIO device
+ * attributes in the list. Note: if you want to reuse the list after calling
+ * this function you have to reinitialize it using INIT_LIST_HEAD().
+ */
+void iio_free_chan_devattr_list(struct list_head *attr_list)
 {
-	kfree(p->dev_attr.attr.name);
-	kfree(p);
+	struct iio_dev_attr *p, *n;
+
+	list_for_each_entry_safe(p, n, attr_list, l) {
+		kfree(p->dev_attr.attr.name);
+		kfree(p);
+	}
 }
 
 static ssize_t iio_show_dev_name(struct device *dev,
@@ -771,7 +838,7 @@
 static int iio_device_register_sysfs(struct iio_dev *indio_dev)
 {
 	int i, ret = 0, attrcount, attrn, attrcount_orig = 0;
-	struct iio_dev_attr *p, *n;
+	struct iio_dev_attr *p;
 	struct attribute **attr;
 
 	/* First count elements in any existing group */
@@ -824,11 +891,7 @@
 	return 0;
 
 error_clear_attrs:
-	list_for_each_entry_safe(p, n,
-				 &indio_dev->channel_attr_list, l) {
-		list_del(&p->l);
-		iio_device_remove_and_free_read_attr(indio_dev, p);
-	}
+	iio_free_chan_devattr_list(&indio_dev->channel_attr_list);
 
 	return ret;
 }
@@ -836,12 +899,7 @@
 static void iio_device_unregister_sysfs(struct iio_dev *indio_dev)
 {
 
-	struct iio_dev_attr *p, *n;
-
-	list_for_each_entry_safe(p, n, &indio_dev->channel_attr_list, l) {
-		list_del(&p->l);
-		iio_device_remove_and_free_read_attr(indio_dev, p);
-	}
+	iio_free_chan_devattr_list(&indio_dev->channel_attr_list);
 	kfree(indio_dev->chan_attr_group.attrs);
 }
 
@@ -853,6 +911,8 @@
 	iio_device_unregister_eventset(indio_dev);
 	iio_device_unregister_sysfs(indio_dev);
 
+	iio_buffer_put(indio_dev->buffer);
+
 	ida_simple_remove(&iio_ida, indio_dev->id);
 	kfree(indio_dev);
 }
@@ -890,7 +950,7 @@
 		dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
 		if (dev->id < 0) {
 			/* cannot use a dev_err as the name isn't available */
-			printk(KERN_ERR "Failed to get id\n");
+			pr_err("failed to get device id\n");
 			kfree(dev);
 			return NULL;
 		}
@@ -995,6 +1055,9 @@
 	int __user *ip = (int __user *)arg;
 	int fd;
 
+	if (!indio_dev->info)
+		return -ENODEV;
+
 	if (cmd == IIO_GET_EVENT_FD_IOCTL) {
 		fd = iio_event_getfd(indio_dev);
 		if (copy_to_user(ip, &fd, sizeof(fd)))
@@ -1091,6 +1154,10 @@
 	iio_disable_all_buffers(indio_dev);
 
 	indio_dev->info = NULL;
+
+	iio_device_wakeup_eventset(indio_dev);
+	iio_buffer_wakeup_poll(indio_dev);
+
 	mutex_unlock(&indio_dev->info_exist_lock);
 }
 EXPORT_SYMBOL(iio_device_unregister);
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 6be65ef..dac15b9 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -76,6 +76,9 @@
 	struct iio_event_interface *ev_int = indio_dev->event_interface;
 	unsigned int events = 0;
 
+	if (!indio_dev->info)
+		return -ENODEV;
+
 	poll_wait(filep, &ev_int->wait, wait);
 
 	spin_lock_irq(&ev_int->wait.lock);
@@ -96,6 +99,9 @@
 	unsigned int copied;
 	int ret;
 
+	if (!indio_dev->info)
+		return -ENODEV;
+
 	if (count < sizeof(struct iio_event_data))
 		return -EINVAL;
 
@@ -107,9 +113,14 @@
 		}
 		/* Blocking on device; waiting for something to be there */
 		ret = wait_event_interruptible_locked_irq(ev_int->wait,
-					!kfifo_is_empty(&ev_int->det_events));
+					!kfifo_is_empty(&ev_int->det_events) ||
+					indio_dev->info == NULL);
 		if (ret)
 			goto error_unlock;
+		if (indio_dev->info == NULL) {
+			ret = -ENODEV;
+			goto error_unlock;
+		}
 		/* Single access device so no one else can get the data */
 	}
 
@@ -166,7 +177,7 @@
 	iio_device_get(indio_dev);
 
 	fd = anon_inode_getfd("iio:event", &iio_event_chrdev_fileops,
-				indio_dev, O_RDONLY);
+				indio_dev, O_RDONLY | O_CLOEXEC);
 	if (fd < 0) {
 		spin_lock_irq(&ev_int->wait.lock);
 		__clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags);
@@ -190,6 +201,27 @@
 	[IIO_EV_DIR_FALLING] = "falling"
 };
 
+static const char * const iio_ev_info_text[] = {
+	[IIO_EV_INFO_ENABLE] = "en",
+	[IIO_EV_INFO_VALUE] = "value",
+	[IIO_EV_INFO_HYSTERESIS] = "hysteresis",
+};
+
+static enum iio_event_direction iio_ev_attr_dir(struct iio_dev_attr *attr)
+{
+	return attr->c->event_spec[attr->address & 0xffff].dir;
+}
+
+static enum iio_event_type iio_ev_attr_type(struct iio_dev_attr *attr)
+{
+	return attr->c->event_spec[attr->address & 0xffff].type;
+}
+
+static enum iio_event_info iio_ev_attr_info(struct iio_dev_attr *attr)
+{
+	return (attr->address >> 16) & 0xffff;
+}
+
 static ssize_t iio_ev_state_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf,
@@ -204,9 +236,14 @@
 	if (ret < 0)
 		return ret;
 
-	ret = indio_dev->info->write_event_config(indio_dev,
-						  this_attr->address,
-						  val);
+	if (indio_dev->info->write_event_config)
+		ret = indio_dev->info->write_event_config(indio_dev,
+			this_attr->address, val);
+	else
+		ret = indio_dev->info->write_event_config_new(indio_dev,
+			this_attr->c, iio_ev_attr_type(this_attr),
+			iio_ev_attr_dir(this_attr), val);
+
 	return (ret < 0) ? ret : len;
 }
 
@@ -216,9 +253,15 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	int val = indio_dev->info->read_event_config(indio_dev,
-						     this_attr->address);
+	int val;
 
+	if (indio_dev->info->read_event_config)
+		val = indio_dev->info->read_event_config(indio_dev,
+			this_attr->address);
+	else
+		val = indio_dev->info->read_event_config_new(indio_dev,
+			this_attr->c, iio_ev_attr_type(this_attr),
+			iio_ev_attr_dir(this_attr));
 	if (val < 0)
 		return val;
 	else
@@ -231,14 +274,24 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	int val, ret;
+	int val, val2;
+	int ret;
 
-	ret = indio_dev->info->read_event_value(indio_dev,
-						this_attr->address, &val);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d\n", val);
+	if (indio_dev->info->read_event_value) {
+		ret = indio_dev->info->read_event_value(indio_dev,
+			this_attr->address, &val);
+		if (ret < 0)
+			return ret;
+		return sprintf(buf, "%d\n", val);
+	} else {
+		ret = indio_dev->info->read_event_value_new(indio_dev,
+			this_attr->c, iio_ev_attr_type(this_attr),
+			iio_ev_attr_dir(this_attr), iio_ev_attr_info(this_attr),
+			&val, &val2);
+		if (ret < 0)
+			return ret;
+		return iio_format_value(buf, ret, val, val2);
+	}
 }
 
 static ssize_t iio_ev_value_store(struct device *dev,
@@ -248,25 +301,120 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	int val;
+	int val, val2;
 	int ret;
 
-	if (!indio_dev->info->write_event_value)
+	if (!indio_dev->info->write_event_value &&
+		!indio_dev->info->write_event_value_new)
 		return -EINVAL;
 
-	ret = kstrtoint(buf, 10, &val);
-	if (ret)
-		return ret;
-
-	ret = indio_dev->info->write_event_value(indio_dev, this_attr->address,
-						 val);
+	if (indio_dev->info->write_event_value) {
+		ret = kstrtoint(buf, 10, &val);
+		if (ret)
+			return ret;
+		ret = indio_dev->info->write_event_value(indio_dev,
+			this_attr->address, val);
+	} else {
+		ret = iio_str_to_fixpoint(buf, 100000, &val, &val2);
+		if (ret)
+			return ret;
+		ret = indio_dev->info->write_event_value_new(indio_dev,
+			this_attr->c, iio_ev_attr_type(this_attr),
+			iio_ev_attr_dir(this_attr), iio_ev_attr_info(this_attr),
+			val, val2);
+	}
 	if (ret < 0)
 		return ret;
 
 	return len;
 }
 
-static int iio_device_add_event_sysfs(struct iio_dev *indio_dev,
+static int iio_device_add_event(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, unsigned int spec_index,
+	enum iio_event_type type, enum iio_event_direction dir,
+	enum iio_shared_by shared_by, const unsigned long *mask)
+{
+	ssize_t (*show)(struct device *, struct device_attribute *, char *);
+	ssize_t (*store)(struct device *, struct device_attribute *,
+		const char *, size_t);
+	unsigned int attrcount = 0;
+	unsigned int i;
+	char *postfix;
+	int ret;
+
+	for_each_set_bit(i, mask, sizeof(*mask)) {
+		postfix = kasprintf(GFP_KERNEL, "%s_%s_%s",
+				iio_ev_type_text[type], iio_ev_dir_text[dir],
+				iio_ev_info_text[i]);
+		if (postfix == NULL)
+			return -ENOMEM;
+
+		if (i == IIO_EV_INFO_ENABLE) {
+			show = iio_ev_state_show;
+			store = iio_ev_state_store;
+		} else {
+			show = iio_ev_value_show;
+			store = iio_ev_value_store;
+		}
+
+		ret = __iio_add_chan_devattr(postfix, chan, show, store,
+			 (i << 16) | spec_index, shared_by, &indio_dev->dev,
+			&indio_dev->event_interface->dev_attr_list);
+		kfree(postfix);
+
+		if (ret)
+			return ret;
+
+		attrcount++;
+	}
+
+	return attrcount;
+}
+
+static int iio_device_add_event_sysfs_new(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan)
+{
+	int ret = 0, i, attrcount = 0;
+	enum iio_event_direction dir;
+	enum iio_event_type type;
+
+	for (i = 0; i < chan->num_event_specs; i++) {
+		type = chan->event_spec[i].type;
+		dir = chan->event_spec[i].dir;
+
+		ret = iio_device_add_event(indio_dev, chan, i, type, dir,
+			IIO_SEPARATE, &chan->event_spec[i].mask_separate);
+		if (ret < 0)
+			goto error_ret;
+		attrcount += ret;
+
+		ret = iio_device_add_event(indio_dev, chan, i, type, dir,
+			IIO_SHARED_BY_TYPE,
+			&chan->event_spec[i].mask_shared_by_type);
+		if (ret < 0)
+			goto error_ret;
+		attrcount += ret;
+
+		ret = iio_device_add_event(indio_dev, chan, i, type, dir,
+			IIO_SHARED_BY_DIR,
+			&chan->event_spec[i].mask_shared_by_dir);
+		if (ret < 0)
+			goto error_ret;
+		attrcount += ret;
+
+		ret = iio_device_add_event(indio_dev, chan, i, type, dir,
+			IIO_SHARED_BY_ALL,
+			&chan->event_spec[i].mask_shared_by_all);
+		if (ret < 0)
+			goto error_ret;
+		attrcount += ret;
+	}
+	ret = attrcount;
+error_ret:
+	return ret;
+}
+
+static int iio_device_add_event_sysfs_old(struct iio_dev *indio_dev,
 				      struct iio_chan_spec const *chan)
 {
 	int ret = 0, i, attrcount = 0;
@@ -339,15 +487,14 @@
 	return ret;
 }
 
-static inline void __iio_remove_event_config_attrs(struct iio_dev *indio_dev)
+
+static int iio_device_add_event_sysfs(struct iio_dev *indio_dev,
+				      struct iio_chan_spec const *chan)
 {
-	struct iio_dev_attr *p, *n;
-	list_for_each_entry_safe(p, n,
-				 &indio_dev->event_interface->
-				 dev_attr_list, l) {
-		kfree(p->dev_attr.attr.name);
-		kfree(p);
-	}
+	if (chan->event_mask)
+		return iio_device_add_event_sysfs_old(indio_dev, chan);
+	else
+		return iio_device_add_event_sysfs_new(indio_dev, chan);
 }
 
 static inline int __iio_add_event_config_attrs(struct iio_dev *indio_dev)
@@ -369,9 +516,12 @@
 {
 	int j;
 
-	for (j = 0; j < indio_dev->num_channels; j++)
+	for (j = 0; j < indio_dev->num_channels; j++) {
 		if (indio_dev->channels[j].event_mask != 0)
 			return true;
+		if (indio_dev->channels[j].num_event_specs != 0)
+			return true;
+	}
 	return false;
 }
 
@@ -441,18 +591,32 @@
 	return 0;
 
 error_free_setup_event_lines:
-	__iio_remove_event_config_attrs(indio_dev);
+	iio_free_chan_devattr_list(&indio_dev->event_interface->dev_attr_list);
 	kfree(indio_dev->event_interface);
 error_ret:
 
 	return ret;
 }
 
+/**
+ * iio_device_wakeup_eventset - Wakes up the event waitqueue
+ * @indio_dev: The IIO device
+ *
+ * Wakes up the event waitqueue used for poll() and blocking read().
+ * Should usually be called when the device is unregistered.
+ */
+void iio_device_wakeup_eventset(struct iio_dev *indio_dev)
+{
+	if (indio_dev->event_interface == NULL)
+		return;
+	wake_up(&indio_dev->event_interface->wait);
+}
+
 void iio_device_unregister_eventset(struct iio_dev *indio_dev)
 {
 	if (indio_dev->event_interface == NULL)
 		return;
-	__iio_remove_event_config_attrs(indio_dev);
+	iio_free_chan_devattr_list(&indio_dev->event_interface->dev_attr_list);
 	kfree(indio_dev->event_interface->group.attrs);
 	kfree(indio_dev->event_interface);
 }
diff --git a/drivers/iio/industrialio-triggered-buffer.c b/drivers/iio/industrialio-triggered-buffer.c
index 46c619b..d6f54930 100644
--- a/drivers/iio/industrialio-triggered-buffer.c
+++ b/drivers/iio/industrialio-triggered-buffer.c
@@ -17,7 +17,6 @@
 #include <linux/iio/trigger_consumer.h>
 
 static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
-	.preenable = &iio_sw_buffer_preenable,
 	.postenable = &iio_triggered_buffer_postenable,
 	.predisable = &iio_triggered_buffer_predisable,
 };
@@ -47,14 +46,17 @@
 	irqreturn_t (*pollfunc_th)(int irq, void *p),
 	const struct iio_buffer_setup_ops *setup_ops)
 {
+	struct iio_buffer *buffer;
 	int ret;
 
-	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
-	if (!indio_dev->buffer) {
+	buffer = iio_kfifo_allocate(indio_dev);
+	if (!buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
 	}
 
+	iio_device_attach_buffer(indio_dev, buffer);
+
 	indio_dev->pollfunc = iio_alloc_pollfunc(pollfunc_bh,
 						 pollfunc_th,
 						 IRQF_ONESHOT,
diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
index a923c78..95c6fc8 100644
--- a/drivers/iio/kfifo_buf.c
+++ b/drivers/iio/kfifo_buf.c
@@ -7,10 +7,12 @@
 #include <linux/mutex.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/sched.h>
+#include <linux/poll.h>
 
 struct iio_kfifo {
 	struct iio_buffer buffer;
 	struct kfifo kf;
+	struct mutex user_lock;
 	int update_needed;
 };
 
@@ -31,13 +33,18 @@
 	int ret = 0;
 	struct iio_kfifo *buf = iio_to_kfifo(r);
 
-	if (!buf->update_needed)
-		goto error_ret;
-	kfifo_free(&buf->kf);
-	ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum,
+	mutex_lock(&buf->user_lock);
+	if (buf->update_needed) {
+		kfifo_free(&buf->kf);
+		ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum,
 				   buf->buffer.length);
+		buf->update_needed = false;
+	} else {
+		kfifo_reset_out(&buf->kf);
+	}
 	r->stufftoread = false;
-error_ret:
+	mutex_unlock(&buf->user_lock);
+
 	return ret;
 }
 
@@ -94,7 +101,7 @@
 }
 
 static int iio_store_to_kfifo(struct iio_buffer *r,
-			      u8 *data)
+			      const void *data)
 {
 	int ret;
 	struct iio_kfifo *kf = iio_to_kfifo(r);
@@ -102,7 +109,7 @@
 	if (ret != 1)
 		return -EBUSY;
 	r->stufftoread = true;
-	wake_up_interruptible(&r->pollq);
+	wake_up_interruptible_poll(&r->pollq, POLLIN | POLLRDNORM);
 
 	return 0;
 }
@@ -113,12 +120,13 @@
 	int ret, copied;
 	struct iio_kfifo *kf = iio_to_kfifo(r);
 
-	if (n < r->bytes_per_datum || r->bytes_per_datum == 0)
-		return -EINVAL;
+	if (mutex_lock_interruptible(&kf->user_lock))
+		return -ERESTARTSYS;
 
-	ret = kfifo_to_user(&kf->kf, buf, n, &copied);
-	if (ret < 0)
-		return ret;
+	if (!kfifo_initialized(&kf->kf) || n < kfifo_esize(&kf->kf))
+		ret = -EINVAL;
+	else
+		ret = kfifo_to_user(&kf->kf, buf, n, &copied);
 
 	if (kfifo_is_empty(&kf->kf))
 		r->stufftoread = false;
@@ -126,9 +134,22 @@
 	if (!kfifo_is_empty(&kf->kf))
 		r->stufftoread = true;
 
+	mutex_unlock(&kf->user_lock);
+	if (ret < 0)
+		return ret;
+
 	return copied;
 }
 
+static void iio_kfifo_buffer_release(struct iio_buffer *buffer)
+{
+	struct iio_kfifo *kf = iio_to_kfifo(buffer);
+
+	mutex_destroy(&kf->user_lock);
+	kfifo_free(&kf->kf);
+	kfree(kf);
+}
+
 static const struct iio_buffer_access_funcs kfifo_access_funcs = {
 	.store_to = &iio_store_to_kfifo,
 	.read_first_n = &iio_read_first_n_kfifo,
@@ -137,6 +158,7 @@
 	.set_bytes_per_datum = &iio_set_bytes_per_datum_kfifo,
 	.get_length = &iio_get_length_kfifo,
 	.set_length = &iio_set_length_kfifo,
+	.release = &iio_kfifo_buffer_release,
 };
 
 struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev)
@@ -151,13 +173,14 @@
 	kf->buffer.attrs = &iio_kfifo_attribute_group;
 	kf->buffer.access = &kfifo_access_funcs;
 	kf->buffer.length = 2;
+	mutex_init(&kf->user_lock);
 	return &kf->buffer;
 }
 EXPORT_SYMBOL(iio_kfifo_allocate);
 
 void iio_kfifo_free(struct iio_buffer *r)
 {
-	kfree(iio_to_kfifo(r));
+	iio_buffer_put(r);
 }
 EXPORT_SYMBOL(iio_kfifo_free);
 
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index bf9fa0d..f98c2b5 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -27,6 +27,29 @@
 	 To compile this driver as a module, choose M here: the
 	 module will be called apds9300.
 
+config CM36651
+	depends on I2C
+	tristate "CM36651 driver"
+	help
+	 Say Y here if you use cm36651.
+	 This option enables proximity & RGB sensor using
+	 Capella cm36651 device driver.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called cm36651.
+
+config GP2AP020A00F
+	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
+	  hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gp2ap020a00f.
+
 config HID_SENSOR_ALS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
@@ -55,6 +78,16 @@
 	  changes. The ALS-control output values can be set per zone for the
 	  three current output channels.
 
+config TCS3472
+	tristate "TAOS TCS3472 color light-to-digital converter"
+	depends on I2C
+	help
+	 If you say yes here you get support for the TAOS TCS3472
+	 family of color light-to-digital converters with IR filter.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tcs3472.
+
 config SENSORS_TSL2563
 	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
 	depends on I2C
@@ -65,6 +98,16 @@
 	 This driver can also be built as a module.  If so, the module
 	 will be called tsl2563.
 
+config TSL4531
+	tristate "TAOS TSL4531 ambient light sensors"
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the TAOS TSL4531 family
+	 of ambient light sensors with direct lux output.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called tsl4531.
+
 config VCNL4000
 	tristate "VCNL4000 combined ALS and proximity sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 354ee9a..daa327f 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -5,7 +5,11 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
+obj-$(CONFIG_CM36651)		+= cm36651.o
+obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
+obj-$(CONFIG_TCS3472)		+= tcs3472.o
+obj-$(CONFIG_TSL4531)		+= tsl4531.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c
index 23cff79..83d15c5 100644
--- a/drivers/iio/light/adjd_s311.c
+++ b/drivers/iio/light/adjd_s311.c
@@ -114,43 +114,6 @@
 	return 0;
 }
 
-static ssize_t adjd_s311_read_int_time(struct iio_dev *indio_dev,
-	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
-{
-	struct adjd_s311_data *data = iio_priv(indio_dev);
-	s32 ret;
-
-	ret = i2c_smbus_read_word_data(data->client,
-		ADJD_S311_INT_REG(chan->address));
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d\n", ret & ADJD_S311_INT_MASK);
-}
-
-static ssize_t adjd_s311_write_int_time(struct iio_dev *indio_dev,
-	 uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
-	 size_t len)
-{
-	struct adjd_s311_data *data = iio_priv(indio_dev);
-	unsigned long int_time;
-	int ret;
-
-	ret = kstrtoul(buf, 10, &int_time);
-	if (ret)
-		return ret;
-
-	if (int_time > ADJD_S311_INT_MASK)
-		return -EINVAL;
-
-	ret = i2c_smbus_write_word_data(data->client,
-		ADJD_S311_INT_REG(chan->address), int_time);
-	if (ret < 0)
-		return ret;
-
-	return len;
-}
-
 static irqreturn_t adjd_s311_trigger_handler(int irq, void *p)
 {
 	struct iio_poll_func *pf = p;
@@ -175,10 +138,7 @@
 		len += 2;
 	}
 
-	if (indio_dev->scan_timestamp)
-		*(s64 *)((u8 *)data->buffer + ALIGN(len, sizeof(s64)))
-			= time_ns;
-	iio_push_to_buffers(indio_dev, (u8 *)data->buffer);
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, time_ns);
 
 done:
 	iio_trigger_notify_done(indio_dev->trig);
@@ -186,25 +146,16 @@
 	return IRQ_HANDLED;
 }
 
-static const struct iio_chan_spec_ext_info adjd_s311_ext_info[] = {
-	{
-		.name = "integration_time",
-		.read = adjd_s311_read_int_time,
-		.write = adjd_s311_write_int_time,
-	},
-	{ }
-};
-
 #define ADJD_S311_CHANNEL(_color, _scan_idx) { \
 	.type = IIO_INTENSITY, \
 	.modified = 1, \
 	.address = (IDX_##_color), \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
-		BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
 	.channel2 = (IIO_MOD_LIGHT_##_color), \
 	.scan_index = (_scan_idx), \
 	.scan_type = IIO_ST('u', 10, 16, 0), \
-	.ext_info = adjd_s311_ext_info, \
 }
 
 static const struct iio_chan_spec adjd_s311_channels[] = {
@@ -236,6 +187,18 @@
 			return ret;
 		*val = ret & ADJD_S311_CAP_MASK;
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		ret = i2c_smbus_read_word_data(data->client,
+			ADJD_S311_INT_REG(chan->address));
+		if (ret < 0)
+			return ret;
+		*val = 0;
+		/*
+		 * not documented, based on measurement:
+		 * 4095 LSBs correspond to roughly 4 ms
+		 */
+		*val2 = ret & ADJD_S311_INT_MASK;
+		return IIO_VAL_INT_PLUS_MICRO;
 	}
 	return -EINVAL;
 }
@@ -245,16 +208,20 @@
 			       int val, int val2, long mask)
 {
 	struct adjd_s311_data *data = iio_priv(indio_dev);
-	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_HARDWAREGAIN:
 		if (val < 0 || val > ADJD_S311_CAP_MASK)
 			return -EINVAL;
 
-		ret = i2c_smbus_write_byte_data(data->client,
+		return i2c_smbus_write_byte_data(data->client,
 			ADJD_S311_CAP_REG(chan->address), val);
-		return ret;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val != 0 || val2 < 0 || val2 > ADJD_S311_INT_MASK)
+			return -EINVAL;
+
+		return i2c_smbus_write_word_data(data->client,
+			ADJD_S311_INT_REG(chan->address), val2);
 	}
 	return -EINVAL;
 }
diff --git a/drivers/iio/light/apds9300.c b/drivers/iio/light/apds9300.c
index 66a58bd..51097bb 100644
--- a/drivers/iio/light/apds9300.c
+++ b/drivers/iio/light/apds9300.c
@@ -273,12 +273,14 @@
 	return ret;
 }
 
-static int apds9300_read_thresh(struct iio_dev *indio_dev, u64 event_code,
-		int *val)
+static int apds9300_read_thresh(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info,
+		int *val, int *val2)
 {
 	struct apds9300_data *data = iio_priv(indio_dev);
 
-	switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+	switch (dir) {
 	case IIO_EV_DIR_RISING:
 		*val = data->thresh_hi;
 		break;
@@ -289,17 +291,19 @@
 		return -EINVAL;
 	}
 
-	return 0;
+	return IIO_VAL_INT;
 }
 
-static int apds9300_write_thresh(struct iio_dev *indio_dev, u64 event_code,
-		int val)
+static int apds9300_write_thresh(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info, int val,
+		int val2)
 {
 	struct apds9300_data *data = iio_priv(indio_dev);
 	int ret;
 
 	mutex_lock(&data->mutex);
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
+	if (dir == IIO_EV_DIR_RISING)
 		ret = apds9300_set_thresh_hi(data, val);
 	else
 		ret = apds9300_set_thresh_low(data, val);
@@ -309,7 +313,9 @@
 }
 
 static int apds9300_read_interrupt_config(struct iio_dev *indio_dev,
-		u64 event_code)
+		const struct iio_chan_spec *chan,
+		enum iio_event_type type,
+		enum iio_event_direction dir)
 {
 	struct apds9300_data *data = iio_priv(indio_dev);
 
@@ -317,7 +323,8 @@
 }
 
 static int apds9300_write_interrupt_config(struct iio_dev *indio_dev,
-		u64 event_code, int state)
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, int state)
 {
 	struct apds9300_data *data = iio_priv(indio_dev);
 	int ret;
@@ -337,10 +344,24 @@
 static const struct iio_info apds9300_info = {
 	.driver_module		= THIS_MODULE,
 	.read_raw		= apds9300_read_raw,
-	.read_event_value	= apds9300_read_thresh,
-	.write_event_value	= apds9300_write_thresh,
-	.read_event_config	= apds9300_read_interrupt_config,
-	.write_event_config	= apds9300_write_interrupt_config,
+	.read_event_value_new	= apds9300_read_thresh,
+	.write_event_value_new	= apds9300_write_thresh,
+	.read_event_config_new	= apds9300_read_interrupt_config,
+	.write_event_config_new	= apds9300_write_interrupt_config,
+};
+
+static const struct iio_event_spec apds9300_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
 };
 
 static const struct iio_chan_spec apds9300_channels[] = {
@@ -355,10 +376,8 @@
 		.channel2 = IIO_MOD_LIGHT_BOTH,
 		.indexed = true,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
-					  IIO_EV_DIR_RISING) |
-			       IIO_EV_BIT(IIO_EV_TYPE_THRESH,
-					  IIO_EV_DIR_FALLING)),
+		.event_spec = apds9300_event_spec,
+		.num_event_specs = ARRAY_SIZE(apds9300_event_spec),
 	}, {
 		.type = IIO_INTENSITY,
 		.channel = 1,
diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c
new file mode 100644
index 0000000..21df571
--- /dev/null
+++ b/drivers/iio/light/cm36651.c
@@ -0,0 +1,708 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General Public License version 2, as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+/* Slave address 0x19 for PS of 7 bit addressing protocol for I2C */
+#define CM36651_I2C_ADDR_PS		0x19
+/* Alert Response Address */
+#define CM36651_ARA			0x0C
+
+/* Ambient light sensor */
+#define CM36651_CS_CONF1		0x00
+#define CM36651_CS_CONF2		0x01
+#define CM36651_ALS_WH_M		0x02
+#define CM36651_ALS_WH_L		0x03
+#define CM36651_ALS_WL_M		0x04
+#define CM36651_ALS_WL_L		0x05
+#define CM36651_CS_CONF3		0x06
+#define CM36651_CS_CONF_REG_NUM		0x02
+
+/* Proximity sensor */
+#define CM36651_PS_CONF1		0x00
+#define CM36651_PS_THD			0x01
+#define CM36651_PS_CANC			0x02
+#define CM36651_PS_CONF2		0x03
+#define CM36651_PS_REG_NUM		0x04
+
+/* CS_CONF1 command code */
+#define CM36651_ALS_ENABLE		0x00
+#define CM36651_ALS_DISABLE		0x01
+#define CM36651_ALS_INT_EN		0x02
+#define CM36651_ALS_THRES		0x04
+
+/* CS_CONF2 command code */
+#define CM36651_CS_CONF2_DEFAULT_BIT	0x08
+
+/* CS_CONF3 channel integration time */
+#define CM36651_CS_IT1			0x00 /* Integration time 80000 usec */
+#define CM36651_CS_IT2			0x40 /* Integration time 160000 usec */
+#define CM36651_CS_IT3			0x80 /* Integration time 320000 usec */
+#define CM36651_CS_IT4			0xC0 /* Integration time 640000 usec */
+
+/* PS_CONF1 command code */
+#define CM36651_PS_ENABLE		0x00
+#define CM36651_PS_DISABLE		0x01
+#define CM36651_PS_INT_EN		0x02
+#define CM36651_PS_PERS2		0x04
+#define CM36651_PS_PERS3		0x08
+#define CM36651_PS_PERS4		0x0C
+
+/* PS_CONF1 command code: integration time */
+#define CM36651_PS_IT1			0x00 /* Integration time 320 usec */
+#define CM36651_PS_IT2			0x10 /* Integration time 420 usec */
+#define CM36651_PS_IT3			0x20 /* Integration time 520 usec */
+#define CM36651_PS_IT4			0x30 /* Integration time 640 usec */
+
+/* PS_CONF1 command code: duty ratio */
+#define CM36651_PS_DR1			0x00 /* Duty ratio 1/80 */
+#define CM36651_PS_DR2			0x40 /* Duty ratio 1/160 */
+#define CM36651_PS_DR3			0x80 /* Duty ratio 1/320 */
+#define CM36651_PS_DR4			0xC0 /* Duty ratio 1/640 */
+
+/* PS_THD command code */
+#define CM36651_PS_INITIAL_THD		0x05
+
+/* PS_CANC command code */
+#define CM36651_PS_CANC_DEFAULT		0x00
+
+/* PS_CONF2 command code */
+#define CM36651_PS_HYS1			0x00
+#define CM36651_PS_HYS2			0x01
+#define CM36651_PS_SMART_PERS_EN	0x02
+#define CM36651_PS_DIR_INT		0x04
+#define CM36651_PS_MS			0x10
+
+#define CM36651_CS_COLOR_NUM		4
+
+#define CM36651_CLOSE_PROXIMITY		0x32
+#define CM36651_FAR_PROXIMITY			0x33
+
+#define CM36651_CS_INT_TIME_AVAIL	"80000 160000 320000 640000"
+#define CM36651_PS_INT_TIME_AVAIL	"320 420 520 640"
+
+enum cm36651_operation_mode {
+	CM36651_LIGHT_EN,
+	CM36651_PROXIMITY_EN,
+	CM36651_PROXIMITY_EV_EN,
+};
+
+enum cm36651_light_channel_idx {
+	CM36651_LIGHT_CHANNEL_IDX_RED,
+	CM36651_LIGHT_CHANNEL_IDX_GREEN,
+	CM36651_LIGHT_CHANNEL_IDX_BLUE,
+	CM36651_LIGHT_CHANNEL_IDX_CLEAR,
+};
+
+enum cm36651_command {
+	CM36651_CMD_READ_RAW_LIGHT,
+	CM36651_CMD_READ_RAW_PROXIMITY,
+	CM36651_CMD_PROX_EV_EN,
+	CM36651_CMD_PROX_EV_DIS,
+};
+
+static const u8 cm36651_cs_reg[CM36651_CS_CONF_REG_NUM] = {
+	CM36651_CS_CONF1,
+	CM36651_CS_CONF2,
+};
+
+static const u8 cm36651_ps_reg[CM36651_PS_REG_NUM] = {
+	CM36651_PS_CONF1,
+	CM36651_PS_THD,
+	CM36651_PS_CANC,
+	CM36651_PS_CONF2,
+};
+
+struct cm36651_data {
+	const struct cm36651_platform_data *pdata;
+	struct i2c_client *client;
+	struct i2c_client *ps_client;
+	struct i2c_client *ara_client;
+	struct mutex lock;
+	struct regulator *vled_reg;
+	unsigned long flags;
+	int cs_int_time[CM36651_CS_COLOR_NUM];
+	int ps_int_time;
+	u8 cs_ctrl_regs[CM36651_CS_CONF_REG_NUM];
+	u8 ps_ctrl_regs[CM36651_PS_REG_NUM];
+	u16 color[CM36651_CS_COLOR_NUM];
+};
+
+static int cm36651_setup_reg(struct cm36651_data *cm36651)
+{
+	struct i2c_client *client = cm36651->client;
+	struct i2c_client *ps_client = cm36651->ps_client;
+	int i, ret;
+
+	/* CS initialization */
+	cm36651->cs_ctrl_regs[CM36651_CS_CONF1] = CM36651_ALS_ENABLE |
+							     CM36651_ALS_THRES;
+	cm36651->cs_ctrl_regs[CM36651_CS_CONF2] = CM36651_CS_CONF2_DEFAULT_BIT;
+
+	for (i = 0; i < CM36651_CS_CONF_REG_NUM; i++) {
+		ret = i2c_smbus_write_byte_data(client, cm36651_cs_reg[i],
+						     cm36651->cs_ctrl_regs[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* PS initialization */
+	cm36651->ps_ctrl_regs[CM36651_PS_CONF1] = CM36651_PS_ENABLE |
+								CM36651_PS_IT2;
+	cm36651->ps_ctrl_regs[CM36651_PS_THD] = CM36651_PS_INITIAL_THD;
+	cm36651->ps_ctrl_regs[CM36651_PS_CANC] = CM36651_PS_CANC_DEFAULT;
+	cm36651->ps_ctrl_regs[CM36651_PS_CONF2] = CM36651_PS_HYS2 |
+				CM36651_PS_DIR_INT | CM36651_PS_SMART_PERS_EN;
+
+	for (i = 0; i < CM36651_PS_REG_NUM; i++) {
+		ret = i2c_smbus_write_byte_data(ps_client, cm36651_ps_reg[i],
+						     cm36651->ps_ctrl_regs[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Set shutdown mode */
+	ret = i2c_smbus_write_byte_data(client, CM36651_CS_CONF1,
+							  CM36651_ALS_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(cm36651->ps_client,
+					 CM36651_PS_CONF1, CM36651_PS_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int cm36651_read_output(struct cm36651_data *cm36651,
+				struct iio_chan_spec const *chan, int *val)
+{
+	struct i2c_client *client = cm36651->client;
+	int ret = -EINVAL;
+
+	switch (chan->type) {
+	case IIO_LIGHT:
+		*val = i2c_smbus_read_word_data(client, chan->address);
+		if (*val < 0)
+			return ret;
+
+		ret = i2c_smbus_write_byte_data(client, CM36651_CS_CONF1,
+							CM36651_ALS_DISABLE);
+		if (ret < 0)
+			return ret;
+
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_PROXIMITY:
+		*val = i2c_smbus_read_byte(cm36651->ps_client);
+		if (*val < 0)
+			return ret;
+
+		if (!test_bit(CM36651_PROXIMITY_EV_EN, &cm36651->flags)) {
+			ret = i2c_smbus_write_byte_data(cm36651->ps_client,
+					CM36651_PS_CONF1, CM36651_PS_DISABLE);
+			if (ret < 0)
+				return ret;
+		}
+
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static irqreturn_t cm36651_irq_handler(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+	struct i2c_client *client = cm36651->client;
+	int ev_dir, ret;
+	u64 ev_code;
+
+	/*
+	 * The PS INT pin is an active low signal that PS INT move logic low
+	 * when the object is detect. Once the MCU host received the PS INT
+	 * "LOW" signal, the Host needs to read the data at Alert Response
+	 * Address(ARA) to clear the PS INT signal. After clearing the PS
+	 * INT pin, the PS INT signal toggles from low to high.
+	 */
+	ret = i2c_smbus_read_byte(cm36651->ara_client);
+	if (ret < 0) {
+		dev_err(&client->dev,
+				"%s: Data read failed: %d\n", __func__, ret);
+		return IRQ_HANDLED;
+	}
+	switch (ret) {
+	case CM36651_CLOSE_PROXIMITY:
+		ev_dir = IIO_EV_DIR_RISING;
+		break;
+	case CM36651_FAR_PROXIMITY:
+		ev_dir = IIO_EV_DIR_FALLING;
+		break;
+	default:
+		dev_err(&client->dev,
+			"%s: Data read wrong: %d\n", __func__, ret);
+		return IRQ_HANDLED;
+	}
+
+	ev_code = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
+				CM36651_CMD_READ_RAW_PROXIMITY,
+				IIO_EV_TYPE_THRESH, ev_dir);
+
+	iio_push_event(indio_dev, ev_code, iio_get_time_ns());
+
+	return IRQ_HANDLED;
+}
+
+static int cm36651_set_operation_mode(struct cm36651_data *cm36651, int cmd)
+{
+	struct i2c_client *client = cm36651->client;
+	struct i2c_client *ps_client = cm36651->ps_client;
+	int ret = -EINVAL;
+
+	switch (cmd) {
+	case CM36651_CMD_READ_RAW_LIGHT:
+		ret = i2c_smbus_write_byte_data(client, CM36651_CS_CONF1,
+				cm36651->cs_ctrl_regs[CM36651_CS_CONF1]);
+		break;
+	case CM36651_CMD_READ_RAW_PROXIMITY:
+		if (test_bit(CM36651_PROXIMITY_EV_EN, &cm36651->flags))
+			return CM36651_PROXIMITY_EV_EN;
+
+		ret = i2c_smbus_write_byte_data(ps_client, CM36651_PS_CONF1,
+				cm36651->ps_ctrl_regs[CM36651_PS_CONF1]);
+		break;
+	case CM36651_CMD_PROX_EV_EN:
+		if (test_bit(CM36651_PROXIMITY_EV_EN, &cm36651->flags)) {
+			dev_err(&client->dev,
+				"Already proximity event enable state\n");
+			return ret;
+		}
+		set_bit(CM36651_PROXIMITY_EV_EN, &cm36651->flags);
+
+		ret = i2c_smbus_write_byte_data(ps_client,
+			cm36651_ps_reg[CM36651_PS_CONF1],
+			CM36651_PS_INT_EN | CM36651_PS_PERS2 | CM36651_PS_IT2);
+
+		if (ret < 0) {
+			dev_err(&client->dev, "Proximity enable event failed\n");
+			return ret;
+		}
+		break;
+	case CM36651_CMD_PROX_EV_DIS:
+		if (!test_bit(CM36651_PROXIMITY_EV_EN, &cm36651->flags)) {
+			dev_err(&client->dev,
+				"Already proximity event disable state\n");
+			return ret;
+		}
+		clear_bit(CM36651_PROXIMITY_EV_EN, &cm36651->flags);
+		ret = i2c_smbus_write_byte_data(ps_client,
+					CM36651_PS_CONF1, CM36651_PS_DISABLE);
+		break;
+	}
+
+	if (ret < 0)
+		dev_err(&client->dev, "Write register failed\n");
+
+	return ret;
+}
+
+static int cm36651_read_channel(struct cm36651_data *cm36651,
+				struct iio_chan_spec const *chan, int *val)
+{
+	struct i2c_client *client = cm36651->client;
+	int cmd, ret;
+
+	if (chan->type == IIO_LIGHT)
+		cmd = CM36651_CMD_READ_RAW_LIGHT;
+	else if (chan->type == IIO_PROXIMITY)
+		cmd = CM36651_CMD_READ_RAW_PROXIMITY;
+	else
+		return -EINVAL;
+
+	ret = cm36651_set_operation_mode(cm36651, cmd);
+	if (ret < 0) {
+		dev_err(&client->dev, "CM36651 set operation mode failed\n");
+		return ret;
+	}
+	/* Delay for work after enable operation */
+	msleep(50);
+	ret = cm36651_read_output(cm36651, chan, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "CM36651 read output failed\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int cm36651_read_int_time(struct cm36651_data *cm36651,
+				struct iio_chan_spec const *chan, int *val)
+{
+	switch (chan->type) {
+	case IIO_LIGHT:
+		if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT1)
+			*val = 80000;
+		else if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT2)
+			*val = 160000;
+		else if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT3)
+			*val = 320000;
+		else if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT4)
+			*val = 640000;
+		else
+			return -EINVAL;
+		break;
+	case IIO_PROXIMITY:
+		if (cm36651->ps_int_time == CM36651_PS_IT1)
+			*val = 320;
+		else if (cm36651->ps_int_time == CM36651_PS_IT2)
+			*val = 420;
+		else if (cm36651->ps_int_time == CM36651_PS_IT3)
+			*val = 520;
+		else if (cm36651->ps_int_time == CM36651_PS_IT4)
+			*val = 640;
+		else
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int cm36651_write_int_time(struct cm36651_data *cm36651,
+				struct iio_chan_spec const *chan, int val)
+{
+	struct i2c_client *client = cm36651->client;
+	struct i2c_client *ps_client = cm36651->ps_client;
+	int int_time, ret;
+
+	switch (chan->type) {
+	case IIO_LIGHT:
+		if (val == 80000)
+			int_time = CM36651_CS_IT1;
+		else if (val == 160000)
+			int_time = CM36651_CS_IT2;
+		else if (val == 320000)
+			int_time = CM36651_CS_IT3;
+		else if (val == 640000)
+			int_time = CM36651_CS_IT4;
+		else
+			return -EINVAL;
+
+		ret = i2c_smbus_write_byte_data(client, CM36651_CS_CONF3,
+					   int_time >> 2 * (chan->address));
+		if (ret < 0) {
+			dev_err(&client->dev, "CS integration time write failed\n");
+			return ret;
+		}
+		cm36651->cs_int_time[chan->address] = int_time;
+		break;
+	case IIO_PROXIMITY:
+		if (val == 320)
+			int_time = CM36651_PS_IT1;
+		else if (val == 420)
+			int_time = CM36651_PS_IT2;
+		else if (val == 520)
+			int_time = CM36651_PS_IT3;
+		else if (val == 640)
+			int_time = CM36651_PS_IT4;
+		else
+			return -EINVAL;
+
+		ret = i2c_smbus_write_byte_data(ps_client,
+						CM36651_PS_CONF1, int_time);
+		if (ret < 0) {
+			dev_err(&client->dev, "PS integration time write failed\n");
+			return ret;
+		}
+		cm36651->ps_int_time = int_time;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int cm36651_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&cm36651->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = cm36651_read_channel(cm36651, chan, val);
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		ret = cm36651_read_int_time(cm36651, chan, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&cm36651->lock);
+
+	return ret;
+}
+
+static int cm36651_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+	struct i2c_client *client = cm36651->client;
+	int ret = -EINVAL;
+
+	if (mask == IIO_CHAN_INFO_INT_TIME) {
+		ret = cm36651_write_int_time(cm36651, chan, val);
+		if (ret < 0)
+			dev_err(&client->dev, "Integration time write failed\n");
+	}
+
+	return ret;
+}
+
+static int cm36651_read_prox_thresh(struct iio_dev *indio_dev,
+					u64 event_code, int *val)
+{
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+
+	*val = cm36651->ps_ctrl_regs[CM36651_PS_THD];
+
+	return 0;
+}
+
+static int cm36651_write_prox_thresh(struct iio_dev *indio_dev,
+					u64 event_code, int val)
+{
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+	struct i2c_client *client = cm36651->client;
+	int ret;
+
+	if (val < 3 || val > 255)
+		return -EINVAL;
+
+	cm36651->ps_ctrl_regs[CM36651_PS_THD] = val;
+	ret = i2c_smbus_write_byte_data(cm36651->ps_client, CM36651_PS_THD,
+					cm36651->ps_ctrl_regs[CM36651_PS_THD]);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "PS threshold write failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cm36651_write_prox_event_config(struct iio_dev *indio_dev,
+					u64 event_code, int state)
+{
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+	int cmd, ret = -EINVAL;
+
+	mutex_lock(&cm36651->lock);
+
+	cmd = state ? CM36651_CMD_PROX_EV_EN : CM36651_CMD_PROX_EV_DIS;
+	ret = cm36651_set_operation_mode(cm36651, cmd);
+
+	mutex_unlock(&cm36651->lock);
+
+	return ret;
+}
+
+static int cm36651_read_prox_event_config(struct iio_dev *indio_dev,
+							u64 event_code)
+{
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+	int event_en;
+
+	mutex_lock(&cm36651->lock);
+
+	event_en = test_bit(CM36651_PROXIMITY_EV_EN, &cm36651->flags);
+
+	mutex_unlock(&cm36651->lock);
+
+	return event_en;
+}
+
+#define CM36651_LIGHT_CHANNEL(_color, _idx) {		\
+	.type = IIO_LIGHT,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
+			BIT(IIO_CHAN_INFO_INT_TIME),	\
+	.address = _idx,				\
+	.modified = 1,					\
+	.channel2 = IIO_MOD_LIGHT_##_color,		\
+}							\
+
+static const struct iio_chan_spec cm36651_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_INT_TIME),
+		.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_EITHER)
+	},
+	CM36651_LIGHT_CHANNEL(RED, CM36651_LIGHT_CHANNEL_IDX_RED),
+	CM36651_LIGHT_CHANNEL(GREEN, CM36651_LIGHT_CHANNEL_IDX_GREEN),
+	CM36651_LIGHT_CHANNEL(BLUE, CM36651_LIGHT_CHANNEL_IDX_BLUE),
+	CM36651_LIGHT_CHANNEL(CLEAR, CM36651_LIGHT_CHANNEL_IDX_CLEAR),
+};
+
+static IIO_CONST_ATTR(in_illuminance_integration_time_available,
+					CM36651_CS_INT_TIME_AVAIL);
+static IIO_CONST_ATTR(in_proximity_integration_time_available,
+					CM36651_PS_INT_TIME_AVAIL);
+
+static struct attribute *cm36651_attributes[] = {
+	&iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
+	&iio_const_attr_in_proximity_integration_time_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group cm36651_attribute_group = {
+	.attrs = cm36651_attributes
+};
+
+static const struct iio_info cm36651_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= &cm36651_read_raw,
+	.write_raw		= &cm36651_write_raw,
+	.read_event_value	= &cm36651_read_prox_thresh,
+	.write_event_value	= &cm36651_write_prox_thresh,
+	.read_event_config	= &cm36651_read_prox_event_config,
+	.write_event_config	= &cm36651_write_prox_event_config,
+	.attrs			= &cm36651_attribute_group,
+};
+
+static int cm36651_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct cm36651_data *cm36651;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*cm36651));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	cm36651 = iio_priv(indio_dev);
+
+	cm36651->vled_reg = devm_regulator_get(&client->dev, "vled");
+	if (IS_ERR(cm36651->vled_reg)) {
+		dev_err(&client->dev, "get regulator vled failed\n");
+		return PTR_ERR(cm36651->vled_reg);
+	}
+
+	ret = regulator_enable(cm36651->vled_reg);
+	if (ret) {
+		dev_err(&client->dev, "enable regulator vled failed\n");
+		return ret;
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+
+	cm36651->client = client;
+	cm36651->ps_client = i2c_new_dummy(client->adapter,
+						     CM36651_I2C_ADDR_PS);
+	cm36651->ara_client = i2c_new_dummy(client->adapter, CM36651_ARA);
+	mutex_init(&cm36651->lock);
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = cm36651_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cm36651_channels);
+	indio_dev->info = &cm36651_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = cm36651_setup_reg(cm36651);
+	if (ret) {
+		dev_err(&client->dev, "%s: register setup failed\n", __func__);
+		goto error_disable_reg;
+	}
+
+	ret = request_threaded_irq(client->irq, NULL, cm36651_irq_handler,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+							"cm36651", indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "%s: request irq failed\n", __func__);
+		goto error_disable_reg;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "%s: regist device failed\n", __func__);
+		goto error_free_irq;
+	}
+
+	return 0;
+
+error_free_irq:
+	free_irq(client->irq, indio_dev);
+error_disable_reg:
+	regulator_disable(cm36651->vled_reg);
+	return ret;
+}
+
+static int cm36651_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct cm36651_data *cm36651 = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(cm36651->vled_reg);
+	free_irq(client->irq, indio_dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id cm36651_id[] = {
+	{ "cm36651", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, cm36651_id);
+
+static const struct of_device_id cm36651_of_match[] = {
+	{ .compatible = "capella,cm36651" },
+	{ }
+};
+
+static struct i2c_driver cm36651_driver = {
+	.driver = {
+		.name	= "cm36651",
+		.of_match_table = of_match_ptr(cm36651_of_match),
+		.owner	= THIS_MODULE,
+	},
+	.probe		= cm36651_probe,
+	.remove		= cm36651_remove,
+	.id_table	= cm36651_id,
+};
+
+module_i2c_driver(cm36651_driver);
+
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_DESCRIPTION("CM36651 proximity/ambient light sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c
new file mode 100644
index 0000000..dc79835
--- /dev/null
+++ b/drivers/iio/light/gp2ap020a00f.c
@@ -0,0 +1,1654 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * IIO features supported by the driver:
+ *
+ * Read-only raw channels:
+ *   - illiminance_clear [lux]
+ *   - illiminance_ir
+ *   - proximity
+ *
+ * Triggered buffer:
+ *   - illiminance_clear
+ *   - illiminance_ir
+ *   - proximity
+ *
+ * Events:
+ *   - illuminance_clear (rising and falling)
+ *   - proximity (rising and falling)
+ *     - both falling and rising thresholds for the proximity events
+ *       must be set to the values greater than 0.
+ *
+ * The driver supports triggered buffers for all the three
+ * channels as well as high and low threshold events for the
+ * illuminance_clear and proxmimity channels. Triggers
+ * can be enabled simultaneously with both illuminance_clear
+ * events. Proximity events cannot be enabled simultaneously
+ * with any triggers or illuminance events. Enabling/disabling
+ * one of the proximity events automatically enables/disables
+ * the other one.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irq_work.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define GP2A_I2C_NAME "gp2ap020a00f"
+
+/* Registers */
+#define GP2AP020A00F_OP_REG	0x00 /* Basic operations */
+#define GP2AP020A00F_ALS_REG	0x01 /* ALS related settings */
+#define GP2AP020A00F_PS_REG	0x02 /* PS related settings */
+#define GP2AP020A00F_LED_REG	0x03 /* LED reg */
+#define GP2AP020A00F_TL_L_REG	0x04 /* ALS: Threshold low LSB */
+#define GP2AP020A00F_TL_H_REG	0x05 /* ALS: Threshold low MSB */
+#define GP2AP020A00F_TH_L_REG	0x06 /* ALS: Threshold high LSB */
+#define GP2AP020A00F_TH_H_REG	0x07 /* ALS: Threshold high MSB */
+#define GP2AP020A00F_PL_L_REG	0x08 /* PS: Threshold low LSB */
+#define GP2AP020A00F_PL_H_REG	0x09 /* PS: Threshold low MSB */
+#define GP2AP020A00F_PH_L_REG	0x0a /* PS: Threshold high LSB */
+#define GP2AP020A00F_PH_H_REG	0x0b /* PS: Threshold high MSB */
+#define GP2AP020A00F_D0_L_REG	0x0c /* ALS result: Clear/Illuminance LSB */
+#define GP2AP020A00F_D0_H_REG	0x0d /* ALS result: Clear/Illuminance MSB */
+#define GP2AP020A00F_D1_L_REG	0x0e /* ALS result: IR LSB */
+#define GP2AP020A00F_D1_H_REG	0x0f /* ALS result: IR LSB */
+#define GP2AP020A00F_D2_L_REG	0x10 /* PS result LSB */
+#define GP2AP020A00F_D2_H_REG	0x11 /* PS result MSB */
+#define GP2AP020A00F_NUM_REGS	0x12 /* Number of registers */
+
+/* OP_REG bits */
+#define GP2AP020A00F_OP3_MASK		0x80 /* Software shutdown */
+#define GP2AP020A00F_OP3_SHUTDOWN	0x00
+#define GP2AP020A00F_OP3_OPERATION	0x80
+#define GP2AP020A00F_OP2_MASK		0x40 /* Auto shutdown/Continuous mode */
+#define GP2AP020A00F_OP2_AUTO_SHUTDOWN	0x00
+#define GP2AP020A00F_OP2_CONT_OPERATION	0x40
+#define GP2AP020A00F_OP_MASK		0x30 /* Operating mode selection  */
+#define GP2AP020A00F_OP_ALS_AND_PS	0x00
+#define GP2AP020A00F_OP_ALS		0x10
+#define GP2AP020A00F_OP_PS		0x20
+#define GP2AP020A00F_OP_DEBUG		0x30
+#define GP2AP020A00F_PROX_MASK		0x08 /* PS: detection/non-detection */
+#define GP2AP020A00F_PROX_NON_DETECT	0x00
+#define GP2AP020A00F_PROX_DETECT	0x08
+#define GP2AP020A00F_FLAG_P		0x04 /* PS: interrupt result  */
+#define GP2AP020A00F_FLAG_A		0x02 /* ALS: interrupt result  */
+#define GP2AP020A00F_TYPE_MASK		0x01 /* Output data type selection */
+#define GP2AP020A00F_TYPE_MANUAL_CALC	0x00
+#define GP2AP020A00F_TYPE_AUTO_CALC	0x01
+
+/* ALS_REG bits */
+#define GP2AP020A00F_PRST_MASK		0xc0 /* Number of measurement cycles */
+#define GP2AP020A00F_PRST_ONCE		0x00
+#define GP2AP020A00F_PRST_4_CYCLES	0x40
+#define GP2AP020A00F_PRST_8_CYCLES	0x80
+#define GP2AP020A00F_PRST_16_CYCLES	0xc0
+#define GP2AP020A00F_RES_A_MASK		0x38 /* ALS: Resolution */
+#define GP2AP020A00F_RES_A_800ms	0x00
+#define GP2AP020A00F_RES_A_400ms	0x08
+#define GP2AP020A00F_RES_A_200ms	0x10
+#define GP2AP020A00F_RES_A_100ms	0x18
+#define GP2AP020A00F_RES_A_25ms		0x20
+#define GP2AP020A00F_RES_A_6_25ms	0x28
+#define GP2AP020A00F_RES_A_1_56ms	0x30
+#define GP2AP020A00F_RES_A_0_39ms	0x38
+#define GP2AP020A00F_RANGE_A_MASK	0x07 /* ALS: Max measurable range */
+#define GP2AP020A00F_RANGE_A_x1		0x00
+#define GP2AP020A00F_RANGE_A_x2		0x01
+#define GP2AP020A00F_RANGE_A_x4		0x02
+#define GP2AP020A00F_RANGE_A_x8		0x03
+#define GP2AP020A00F_RANGE_A_x16	0x04
+#define GP2AP020A00F_RANGE_A_x32	0x05
+#define GP2AP020A00F_RANGE_A_x64	0x06
+#define GP2AP020A00F_RANGE_A_x128	0x07
+
+/* PS_REG bits */
+#define GP2AP020A00F_ALC_MASK		0x80 /* Auto light cancel */
+#define GP2AP020A00F_ALC_ON		0x80
+#define GP2AP020A00F_ALC_OFF		0x00
+#define GP2AP020A00F_INTTYPE_MASK	0x40 /* Interrupt type setting */
+#define GP2AP020A00F_INTTYPE_LEVEL	0x00
+#define GP2AP020A00F_INTTYPE_PULSE	0x40
+#define GP2AP020A00F_RES_P_MASK		0x38 /* PS: Resolution */
+#define GP2AP020A00F_RES_P_800ms_x2	0x00
+#define GP2AP020A00F_RES_P_400ms_x2	0x08
+#define GP2AP020A00F_RES_P_200ms_x2	0x10
+#define GP2AP020A00F_RES_P_100ms_x2	0x18
+#define GP2AP020A00F_RES_P_25ms_x2	0x20
+#define GP2AP020A00F_RES_P_6_25ms_x2	0x28
+#define GP2AP020A00F_RES_P_1_56ms_x2	0x30
+#define GP2AP020A00F_RES_P_0_39ms_x2	0x38
+#define GP2AP020A00F_RANGE_P_MASK	0x07 /* PS: Max measurable range */
+#define GP2AP020A00F_RANGE_P_x1		0x00
+#define GP2AP020A00F_RANGE_P_x2		0x01
+#define GP2AP020A00F_RANGE_P_x4		0x02
+#define GP2AP020A00F_RANGE_P_x8		0x03
+#define GP2AP020A00F_RANGE_P_x16	0x04
+#define GP2AP020A00F_RANGE_P_x32	0x05
+#define GP2AP020A00F_RANGE_P_x64	0x06
+#define GP2AP020A00F_RANGE_P_x128	0x07
+
+/* LED reg bits */
+#define GP2AP020A00F_INTVAL_MASK	0xc0 /* Intermittent operating */
+#define GP2AP020A00F_INTVAL_0		0x00
+#define GP2AP020A00F_INTVAL_4		0x40
+#define GP2AP020A00F_INTVAL_8		0x80
+#define GP2AP020A00F_INTVAL_16		0xc0
+#define GP2AP020A00F_IS_MASK		0x30 /* ILED drive peak current */
+#define GP2AP020A00F_IS_13_8mA		0x00
+#define GP2AP020A00F_IS_27_5mA		0x10
+#define GP2AP020A00F_IS_55mA		0x20
+#define GP2AP020A00F_IS_110mA		0x30
+#define GP2AP020A00F_PIN_MASK		0x0c /* INT terminal setting */
+#define GP2AP020A00F_PIN_ALS_OR_PS	0x00
+#define GP2AP020A00F_PIN_ALS		0x04
+#define GP2AP020A00F_PIN_PS		0x08
+#define GP2AP020A00F_PIN_PS_DETECT	0x0c
+#define GP2AP020A00F_FREQ_MASK		0x02 /* LED modulation frequency */
+#define GP2AP020A00F_FREQ_327_5kHz	0x00
+#define GP2AP020A00F_FREQ_81_8kHz	0x02
+#define GP2AP020A00F_RST		0x01 /* Software reset */
+
+#define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR	0
+#define GP2AP020A00F_SCAN_MODE_LIGHT_IR		1
+#define GP2AP020A00F_SCAN_MODE_PROXIMITY	2
+#define GP2AP020A00F_CHAN_TIMESTAMP		3
+
+#define GP2AP020A00F_DATA_READY_TIMEOUT		msecs_to_jiffies(1000)
+#define GP2AP020A00F_DATA_REG(chan)		(GP2AP020A00F_D0_L_REG + \
+							(chan) * 2)
+#define GP2AP020A00F_THRESH_REG(th_val_id)	(GP2AP020A00F_TL_L_REG + \
+							(th_val_id) * 2)
+#define GP2AP020A00F_THRESH_VAL_ID(reg_addr)	((reg_addr - 4) / 2)
+
+#define GP2AP020A00F_SUBTRACT_MODE	0
+#define GP2AP020A00F_ADD_MODE		1
+
+#define GP2AP020A00F_MAX_CHANNELS	3
+
+enum gp2ap020a00f_opmode {
+	GP2AP020A00F_OPMODE_READ_RAW_CLEAR,
+	GP2AP020A00F_OPMODE_READ_RAW_IR,
+	GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY,
+	GP2AP020A00F_OPMODE_ALS,
+	GP2AP020A00F_OPMODE_PS,
+	GP2AP020A00F_OPMODE_ALS_AND_PS,
+	GP2AP020A00F_OPMODE_PROX_DETECT,
+	GP2AP020A00F_OPMODE_SHUTDOWN,
+	GP2AP020A00F_NUM_OPMODES,
+};
+
+enum gp2ap020a00f_cmd {
+	GP2AP020A00F_CMD_READ_RAW_CLEAR,
+	GP2AP020A00F_CMD_READ_RAW_IR,
+	GP2AP020A00F_CMD_READ_RAW_PROXIMITY,
+	GP2AP020A00F_CMD_TRIGGER_CLEAR_EN,
+	GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS,
+	GP2AP020A00F_CMD_TRIGGER_IR_EN,
+	GP2AP020A00F_CMD_TRIGGER_IR_DIS,
+	GP2AP020A00F_CMD_TRIGGER_PROX_EN,
+	GP2AP020A00F_CMD_TRIGGER_PROX_DIS,
+	GP2AP020A00F_CMD_ALS_HIGH_EV_EN,
+	GP2AP020A00F_CMD_ALS_HIGH_EV_DIS,
+	GP2AP020A00F_CMD_ALS_LOW_EV_EN,
+	GP2AP020A00F_CMD_ALS_LOW_EV_DIS,
+	GP2AP020A00F_CMD_PROX_HIGH_EV_EN,
+	GP2AP020A00F_CMD_PROX_HIGH_EV_DIS,
+	GP2AP020A00F_CMD_PROX_LOW_EV_EN,
+	GP2AP020A00F_CMD_PROX_LOW_EV_DIS,
+};
+
+enum gp2ap020a00f_flags {
+	GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
+	GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
+	GP2AP020A00F_FLAG_PROX_TRIGGER,
+	GP2AP020A00F_FLAG_PROX_RISING_EV,
+	GP2AP020A00F_FLAG_PROX_FALLING_EV,
+	GP2AP020A00F_FLAG_ALS_RISING_EV,
+	GP2AP020A00F_FLAG_ALS_FALLING_EV,
+	GP2AP020A00F_FLAG_LUX_MODE_HI,
+	GP2AP020A00F_FLAG_DATA_READY,
+};
+
+enum gp2ap020a00f_thresh_val_id {
+	GP2AP020A00F_THRESH_TL,
+	GP2AP020A00F_THRESH_TH,
+	GP2AP020A00F_THRESH_PL,
+	GP2AP020A00F_THRESH_PH,
+};
+
+struct gp2ap020a00f_data {
+	const struct gp2ap020a00f_platform_data *pdata;
+	struct i2c_client *client;
+	struct mutex lock;
+	char *buffer;
+	struct regulator *vled_reg;
+	unsigned long flags;
+	enum gp2ap020a00f_opmode cur_opmode;
+	struct iio_trigger *trig;
+	struct regmap *regmap;
+	unsigned int thresh_val[4];
+	u8 debug_reg_addr;
+	struct irq_work work;
+	wait_queue_head_t data_ready_queue;
+};
+
+static const u8 gp2ap020a00f_reg_init_tab[] = {
+	[GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN,
+	[GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms |
+				 GP2AP020A00F_RANGE_A_x8,
+	[GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON |
+				GP2AP020A00F_RES_P_1_56ms_x2 |
+				GP2AP020A00F_RANGE_P_x4,
+	[GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 |
+				 GP2AP020A00F_IS_110mA |
+				 GP2AP020A00F_FREQ_327_5kHz,
+	[GP2AP020A00F_TL_L_REG] = 0,
+	[GP2AP020A00F_TL_H_REG] = 0,
+	[GP2AP020A00F_TH_L_REG] = 0,
+	[GP2AP020A00F_TH_H_REG] = 0,
+	[GP2AP020A00F_PL_L_REG] = 0,
+	[GP2AP020A00F_PL_H_REG] = 0,
+	[GP2AP020A00F_PH_L_REG] = 0,
+	[GP2AP020A00F_PH_H_REG] = 0,
+};
+
+static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case GP2AP020A00F_OP_REG:
+	case GP2AP020A00F_D0_L_REG:
+	case GP2AP020A00F_D0_H_REG:
+	case GP2AP020A00F_D1_L_REG:
+	case GP2AP020A00F_D1_H_REG:
+	case GP2AP020A00F_D2_L_REG:
+	case GP2AP020A00F_D2_H_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config gp2ap020a00f_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = GP2AP020A00F_D2_H_REG,
+	.cache_type = REGCACHE_RBTREE,
+
+	.volatile_reg = gp2ap020a00f_is_volatile_reg,
+};
+
+static const struct gp2ap020a00f_mutable_config_regs {
+	u8 op_reg;
+	u8 als_reg;
+	u8 ps_reg;
+	u8 led_reg;
+} opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = {
+	[GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = {
+		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_AUTO_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS
+	},
+	[GP2AP020A00F_OPMODE_READ_RAW_IR] = {
+		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS
+	},
+	[GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = {
+		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_PS
+	},
+	[GP2AP020A00F_OPMODE_PROX_DETECT] = {
+		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_4_CYCLES,
+		GP2AP020A00F_INTTYPE_PULSE,
+		GP2AP020A00F_PIN_PS_DETECT
+	},
+	[GP2AP020A00F_OPMODE_ALS] = {
+		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_AUTO_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS
+	},
+	[GP2AP020A00F_OPMODE_PS] = {
+		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_4_CYCLES,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_PS
+	},
+	[GP2AP020A00F_OPMODE_ALS_AND_PS] = {
+		GP2AP020A00F_OP_ALS_AND_PS
+		| GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_AUTO_CALC,
+		GP2AP020A00F_PRST_4_CYCLES,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS_OR_PS
+	},
+	[GP2AP020A00F_OPMODE_SHUTDOWN] = { GP2AP020A00F_OP3_SHUTDOWN, },
+};
+
+static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data,
+					enum gp2ap020a00f_opmode op)
+{
+	unsigned int op_reg_val;
+	int err;
+
+	if (op != GP2AP020A00F_OPMODE_SHUTDOWN) {
+		err = regmap_read(data->regmap, GP2AP020A00F_OP_REG,
+					&op_reg_val);
+		if (err < 0)
+			return err;
+		/*
+		 * Shutdown the device if the operation being executed entails
+		 * mode transition.
+		 */
+		if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) !=
+		    (op_reg_val & GP2AP020A00F_OP_MASK)) {
+			/* set shutdown mode */
+			err = regmap_update_bits(data->regmap,
+				GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK,
+				GP2AP020A00F_OP3_SHUTDOWN);
+			if (err < 0)
+				return err;
+		}
+
+		err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG,
+			GP2AP020A00F_PRST_MASK, opmode_regs_settings[op]
+								.als_reg);
+		if (err < 0)
+			return err;
+
+		err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG,
+			GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op]
+								.ps_reg);
+		if (err < 0)
+			return err;
+
+		err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG,
+			GP2AP020A00F_PIN_MASK, opmode_regs_settings[op]
+								.led_reg);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set OP_REG and apply operation mode (power on / off) */
+	err = regmap_update_bits(data->regmap,
+				 GP2AP020A00F_OP_REG,
+				 GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK |
+				 GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK,
+				 opmode_regs_settings[op].op_reg);
+	if (err < 0)
+		return err;
+
+	data->cur_opmode = op;
+
+	return 0;
+}
+
+static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data)
+{
+	return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
+}
+
+static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data)
+{
+	return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
+}
+
+static int gp2ap020a00f_write_event_threshold(struct gp2ap020a00f_data *data,
+				enum gp2ap020a00f_thresh_val_id th_val_id,
+				bool enable)
+{
+	__le16 thresh_buf = 0;
+	unsigned int thresh_reg_val;
+
+	if (!enable)
+		thresh_reg_val = 0;
+	else if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags) &&
+		 th_val_id != GP2AP020A00F_THRESH_PL &&
+		 th_val_id != GP2AP020A00F_THRESH_PH)
+		/*
+		 * For the high lux mode ALS threshold has to be scaled down
+		 * to allow for proper comparison with the output value.
+		 */
+		thresh_reg_val = data->thresh_val[th_val_id] / 16;
+	else
+		thresh_reg_val = data->thresh_val[th_val_id] > 16000 ?
+					16000 :
+					data->thresh_val[th_val_id];
+
+	thresh_buf = cpu_to_le16(thresh_reg_val);
+
+	return regmap_bulk_write(data->regmap,
+				 GP2AP020A00F_THRESH_REG(th_val_id),
+				 (u8 *)&thresh_buf, 2);
+}
+
+static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data,
+			enum gp2ap020a00f_opmode diff_mode, int add_sub)
+{
+	enum gp2ap020a00f_opmode new_mode;
+
+	if (diff_mode != GP2AP020A00F_OPMODE_ALS &&
+	    diff_mode != GP2AP020A00F_OPMODE_PS)
+		return -EINVAL;
+
+	if (add_sub == GP2AP020A00F_ADD_MODE) {
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN)
+			new_mode =  diff_mode;
+		else
+			new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS;
+	} else {
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS)
+			new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ?
+					GP2AP020A00F_OPMODE_PS :
+					GP2AP020A00F_OPMODE_ALS;
+		else
+			new_mode = GP2AP020A00F_OPMODE_SHUTDOWN;
+	}
+
+	return gp2ap020a00f_set_operation_mode(data, new_mode);
+}
+
+static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data,
+					enum gp2ap020a00f_cmd cmd)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case GP2AP020A00F_CMD_READ_RAW_CLEAR:
+		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+			return -EBUSY;
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_READ_RAW_CLEAR);
+		break;
+	case GP2AP020A00F_CMD_READ_RAW_IR:
+		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+			return -EBUSY;
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_READ_RAW_IR);
+		break;
+	case GP2AP020A00F_CMD_READ_RAW_PROXIMITY:
+		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+			return -EBUSY;
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN:
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data))
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+		set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS:
+		clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
+		if (gp2ap020a00f_als_enabled(data))
+			break;
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_IR_EN:
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data))
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+		set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_IR_DIS:
+		clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
+		if (gp2ap020a00f_als_enabled(data))
+			break;
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_PROX_EN:
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_PS,
+						GP2AP020A00F_ADD_MODE);
+		set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_PROX_DIS:
+		clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_PS,
+						GP2AP020A00F_SUBTRACT_MODE);
+		break;
+	case GP2AP020A00F_CMD_ALS_HIGH_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
+			return 0;
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, true);
+		break;
+	case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+			if (err < 0)
+				return err;
+		}
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, false);
+		break;
+	case GP2AP020A00F_CMD_ALS_LOW_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
+			return 0;
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, true);
+		break;
+	case GP2AP020A00F_CMD_ALS_LOW_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+			if (err < 0)
+				return err;
+		}
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, false);
+		break;
+	case GP2AP020A00F_CMD_PROX_HIGH_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
+			return 0;
+		if (gp2ap020a00f_als_enabled(data) ||
+		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
+			return -EBUSY;
+		if (!gp2ap020a00f_prox_detect_enabled(data)) {
+			err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_PROX_DETECT);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PH, true);
+		break;
+	case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+		if (err < 0)
+			return err;
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PH, false);
+		break;
+	case GP2AP020A00F_CMD_PROX_LOW_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
+			return 0;
+		if (gp2ap020a00f_als_enabled(data) ||
+		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
+			return -EBUSY;
+		if (!gp2ap020a00f_prox_detect_enabled(data)) {
+			err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_PROX_DETECT);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PL, true);
+		break;
+	case GP2AP020A00F_CMD_PROX_LOW_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+		if (err < 0)
+			return err;
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PL, false);
+		break;
+	}
+
+	return err;
+}
+
+static int wait_conversion_complete_irq(struct gp2ap020a00f_data *data)
+{
+	int ret;
+
+	ret = wait_event_timeout(data->data_ready_queue,
+				 test_bit(GP2AP020A00F_FLAG_DATA_READY,
+					  &data->flags),
+				 GP2AP020A00F_DATA_READY_TIMEOUT);
+	clear_bit(GP2AP020A00F_FLAG_DATA_READY, &data->flags);
+
+	return ret > 0 ? 0 : -ETIME;
+}
+
+static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data,
+					unsigned int output_reg, int *val)
+{
+	u8 reg_buf[2];
+	int err;
+
+	err = wait_conversion_complete_irq(data);
+	if (err < 0)
+		dev_dbg(&data->client->dev, "data ready timeout\n");
+
+	err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2);
+	if (err < 0)
+		return err;
+
+	*val = le16_to_cpup((__le16 *)reg_buf);
+
+	return err;
+}
+
+static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data,
+				 int output_val)
+{
+	u8 new_range = 0xff;
+	int err;
+
+	if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) {
+		if (output_val > 16000) {
+			set_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
+			new_range = GP2AP020A00F_RANGE_A_x128;
+		}
+	} else {
+		if (output_val < 1000) {
+			clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
+			new_range = GP2AP020A00F_RANGE_A_x8;
+		}
+	}
+
+	if (new_range != 0xff) {
+		/* Clear als threshold registers to avoid spurious
+		 * events caused by lux mode transition.
+		 */
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, false);
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Clearing als threshold register failed.\n");
+			return false;
+		}
+
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, false);
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Clearing als threshold register failed.\n");
+			return false;
+		}
+
+		/* Change lux mode */
+		err = regmap_update_bits(data->regmap,
+			GP2AP020A00F_OP_REG,
+			GP2AP020A00F_OP3_MASK,
+			GP2AP020A00F_OP3_SHUTDOWN);
+
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Shutting down the device failed.\n");
+			return false;
+		}
+
+		err = regmap_update_bits(data->regmap,
+			GP2AP020A00F_ALS_REG,
+			GP2AP020A00F_RANGE_A_MASK,
+			new_range);
+
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Adjusting device lux mode failed.\n");
+			return false;
+		}
+
+		err = regmap_update_bits(data->regmap,
+			GP2AP020A00F_OP_REG,
+			GP2AP020A00F_OP3_MASK,
+			GP2AP020A00F_OP3_OPERATION);
+
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Powering up the device failed.\n");
+			return false;
+		}
+
+		/* Adjust als threshold register values to the new lux mode */
+		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) {
+			err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, true);
+			if (err < 0) {
+				dev_err(&data->client->dev,
+				"Adjusting als threshold value failed.\n");
+				return false;
+			}
+		}
+
+		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) {
+			err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, true);
+			if (err < 0) {
+				dev_err(&data->client->dev,
+				"Adjusting als threshold value failed.\n");
+				return false;
+			}
+		}
+
+		return true;
+	}
+
+	return false;
+}
+
+static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data,
+						int *output_val)
+{
+	if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags))
+		*output_val *= 16;
+}
+
+static void gp2ap020a00f_iio_trigger_work(struct irq_work *work)
+{
+	struct gp2ap020a00f_data *data =
+		container_of(work, struct gp2ap020a00f_data, work);
+
+	iio_trigger_poll(data->trig, 0);
+}
+
+static irqreturn_t gp2ap020a00f_prox_sensing_handler(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
+	unsigned int op_reg_val;
+	int ret;
+
+	/* Read interrupt flags */
+	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, &op_reg_val);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	if (gp2ap020a00f_prox_detect_enabled(priv)) {
+		if (op_reg_val & GP2AP020A00F_PROX_DETECT) {
+			iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(
+				    IIO_PROXIMITY,
+				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
+				    IIO_EV_TYPE_ROC,
+				    IIO_EV_DIR_RISING),
+			       iio_get_time_ns());
+		} else {
+			iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(
+				    IIO_PROXIMITY,
+				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
+				    IIO_EV_TYPE_ROC,
+				    IIO_EV_DIR_FALLING),
+			       iio_get_time_ns());
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t gp2ap020a00f_thresh_event_handler(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
+	u8 op_reg_flags, d0_reg_buf[2];
+	unsigned int output_val, op_reg_val;
+	int thresh_val_id, ret;
+
+	/* Read interrupt flags */
+	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG,
+							&op_reg_val);
+	if (ret < 0)
+		goto done;
+
+	op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P
+					| GP2AP020A00F_PROX_DETECT);
+
+	op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P
+					& ~GP2AP020A00F_PROX_DETECT);
+
+	/* Clear interrupt flags (if not in INTTYPE_PULSE mode) */
+	if (priv->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) {
+		ret = regmap_write(priv->regmap, GP2AP020A00F_OP_REG,
+								op_reg_val);
+		if (ret < 0)
+			goto done;
+	}
+
+	if (op_reg_flags & GP2AP020A00F_FLAG_A) {
+		/* Check D0 register to assess if the lux mode
+		 * transition is required.
+		 */
+		ret = regmap_bulk_read(priv->regmap, GP2AP020A00F_D0_L_REG,
+							d0_reg_buf, 2);
+		if (ret < 0)
+			goto done;
+
+		output_val = le16_to_cpup((__le16 *)d0_reg_buf);
+
+		if (gp2ap020a00f_adjust_lux_mode(priv, output_val))
+			goto done;
+
+		gp2ap020a00f_output_to_lux(priv, &output_val);
+
+		/*
+		 * We need to check output value to distinguish
+		 * between high and low ambient light threshold event.
+		 */
+		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &priv->flags)) {
+			thresh_val_id =
+			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG);
+			if (output_val > priv->thresh_val[thresh_val_id])
+				iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(
+					    IIO_LIGHT,
+					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+					    IIO_MOD_LIGHT_CLEAR,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_RISING),
+				       iio_get_time_ns());
+		}
+
+		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &priv->flags)) {
+			thresh_val_id =
+			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG);
+			if (output_val < priv->thresh_val[thresh_val_id])
+				iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(
+					    IIO_LIGHT,
+					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+					    IIO_MOD_LIGHT_CLEAR,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_FALLING),
+				       iio_get_time_ns());
+		}
+	}
+
+	if (priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR ||
+	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR ||
+	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) {
+		set_bit(GP2AP020A00F_FLAG_DATA_READY, &priv->flags);
+		wake_up(&priv->data_ready_queue);
+		goto done;
+	}
+
+	if (test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &priv->flags) ||
+	    test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &priv->flags) ||
+	    test_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &priv->flags))
+		/* This fires off the trigger. */
+		irq_work_queue(&priv->work);
+
+done:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data)
+{
+	struct iio_poll_func *pf = data;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
+	size_t d_size = 0;
+	__le32 light_lux;
+	int i, out_val, ret;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		ret = regmap_bulk_read(priv->regmap,
+				GP2AP020A00F_DATA_REG(i),
+				&priv->buffer[d_size], 2);
+		if (ret < 0)
+			goto done;
+
+		if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR ||
+		    i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) {
+			out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]);
+			gp2ap020a00f_output_to_lux(priv, &out_val);
+			light_lux = cpu_to_le32(out_val);
+			memcpy(&priv->buffer[d_size], (u8 *)&light_lux, 4);
+			d_size += 4;
+		} else {
+			d_size += 2;
+		}
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
+		pf->timestamp);
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static u8 gp2ap020a00f_get_thresh_reg(const struct iio_chan_spec *chan,
+					     enum iio_event_direction event_dir)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (event_dir == IIO_EV_DIR_RISING)
+			return GP2AP020A00F_PH_L_REG;
+		else
+			return GP2AP020A00F_PL_L_REG;
+	case IIO_LIGHT:
+		if (event_dir == IIO_EV_DIR_RISING)
+			return GP2AP020A00F_TH_L_REG;
+		else
+			return GP2AP020A00F_TL_L_REG;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir,
+					enum iio_event_info info,
+					int val, int val2)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	bool event_en = false;
+	u8 thresh_val_id;
+	u8 thresh_reg_l;
+	int err = 0;
+
+	mutex_lock(&data->lock);
+
+	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
+	thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l);
+
+	if (thresh_val_id > GP2AP020A00F_THRESH_PH) {
+		err = -EINVAL;
+		goto error_unlock;
+	}
+
+	switch (thresh_reg_l) {
+	case GP2AP020A00F_TH_L_REG:
+		event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
+							&data->flags);
+		break;
+	case GP2AP020A00F_TL_L_REG:
+		event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
+							&data->flags);
+		break;
+	case GP2AP020A00F_PH_L_REG:
+		if (val == 0) {
+			err = -EINVAL;
+			goto error_unlock;
+		}
+		event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
+							&data->flags);
+		break;
+	case GP2AP020A00F_PL_L_REG:
+		if (val == 0) {
+			err = -EINVAL;
+			goto error_unlock;
+		}
+		event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
+							&data->flags);
+		break;
+	}
+
+	data->thresh_val[thresh_val_id] = val;
+	err =  gp2ap020a00f_write_event_threshold(data, thresh_val_id,
+							event_en);
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       enum iio_event_info info,
+				       int *val, int *val2)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	u8 thresh_reg_l;
+	int err = IIO_VAL_INT;
+
+	mutex_lock(&data->lock);
+
+	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
+
+	if (thresh_reg_l > GP2AP020A00F_PH_L_REG) {
+		err = -EINVAL;
+		goto error_unlock;
+	}
+
+	*val = data->thresh_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)];
+
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev,
+						int state)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev;
+	int err;
+
+	cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN :
+			      GP2AP020A00F_CMD_PROX_HIGH_EV_DIS;
+	cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN :
+			     GP2AP020A00F_CMD_PROX_LOW_EV_DIS;
+
+	/*
+	 * In order to enable proximity detection feature in the device
+	 * both high and low threshold registers have to be written
+	 * with different values, greater than zero.
+	 */
+	if (state) {
+		if (data->thresh_val[GP2AP020A00F_THRESH_PL] == 0)
+			return -EINVAL;
+
+		if (data->thresh_val[GP2AP020A00F_THRESH_PH] == 0)
+			return -EINVAL;
+	}
+
+	err = gp2ap020a00f_exec_cmd(data, cmd_high_ev);
+	if (err < 0)
+		return err;
+
+	err = gp2ap020a00f_exec_cmd(data, cmd_low_ev);
+	if (err < 0)
+		return err;
+
+	free_irq(data->client->irq, indio_dev);
+
+	if (state)
+		err = request_threaded_irq(data->client->irq, NULL,
+					   &gp2ap020a00f_prox_sensing_handler,
+					   IRQF_TRIGGER_RISING |
+					   IRQF_TRIGGER_FALLING |
+					   IRQF_ONESHOT,
+					   "gp2ap020a00f_prox_sensing",
+					   indio_dev);
+	else {
+		err = request_threaded_irq(data->client->irq, NULL,
+					   &gp2ap020a00f_thresh_event_handler,
+					   IRQF_TRIGGER_FALLING |
+					   IRQF_ONESHOT,
+					   "gp2ap020a00f_thresh_event",
+					   indio_dev);
+	}
+
+	return err;
+}
+
+static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev,
+					   const struct iio_chan_spec *chan,
+					   enum iio_event_type type,
+					   enum iio_event_direction dir,
+					   int state)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	enum gp2ap020a00f_cmd cmd;
+	int err;
+
+	mutex_lock(&data->lock);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		err = gp2ap020a00f_write_prox_event_config(indio_dev, state);
+		break;
+	case IIO_LIGHT:
+		if (dir == IIO_EV_DIR_RISING) {
+			cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN :
+				      GP2AP020A00F_CMD_ALS_HIGH_EV_DIS;
+			err = gp2ap020a00f_exec_cmd(data, cmd);
+		} else {
+			cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN :
+				      GP2AP020A00F_CMD_ALS_LOW_EV_DIS;
+			err = gp2ap020a00f_exec_cmd(data, cmd);
+		}
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev,
+					   const struct iio_chan_spec *chan,
+					   enum iio_event_type type,
+					   enum iio_event_direction dir)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int event_en = 0;
+
+	mutex_lock(&data->lock);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (dir == IIO_EV_DIR_RISING)
+			event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
+								&data->flags);
+		else
+			event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
+								&data->flags);
+		break;
+	case IIO_LIGHT:
+		if (dir == IIO_EV_DIR_RISING)
+			event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
+								&data->flags);
+		else
+			event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
+								&data->flags);
+		break;
+	default:
+		event_en = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return event_en;
+}
+
+static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data,
+				struct iio_chan_spec const *chan, int *val)
+{
+	enum gp2ap020a00f_cmd cmd;
+	int err;
+
+	switch (chan->scan_index) {
+	case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+		cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR;
+		break;
+	case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+		cmd = GP2AP020A00F_CMD_READ_RAW_IR;
+		break;
+	case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+		cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = gp2ap020a00f_exec_cmd(data, cmd);
+	if (err < 0) {
+		dev_err(&data->client->dev,
+			"gp2ap020a00f_exec_cmd failed\n");
+		goto error_ret;
+	}
+
+	err = gp2ap020a00f_read_output(data, chan->address, val);
+	if (err < 0)
+		dev_err(&data->client->dev,
+			"gp2ap020a00f_read_output failed\n");
+
+	err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+	if (err < 0)
+		dev_err(&data->client->dev,
+			"Failed to shut down the device.\n");
+
+	if (cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR ||
+	    cmd == GP2AP020A00F_CMD_READ_RAW_IR)
+		gp2ap020a00f_output_to_lux(data, val);
+
+error_ret:
+	return err;
+}
+
+static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2,
+			   long mask)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int err = -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev)) {
+			err = -EBUSY;
+			goto error_unlock;
+		}
+
+		err = gp2ap020a00f_read_channel(data, chan, val);
+		break;
+	}
+
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err < 0 ? err : IIO_VAL_INT;
+}
+
+static const struct iio_event_spec gp2ap020a00f_event_spec_light[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_event_spec gp2ap020a00f_event_spec_prox[] = {
+	{
+		.type = IIO_EV_TYPE_ROC,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_ROC,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec gp2ap020a00f_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.channel2 = IIO_MOD_LIGHT_CLEAR,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 24,
+			.shift = 0,
+			.storagebits = 32,
+			.endianness = IIO_LE,
+		},
+		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+		.address = GP2AP020A00F_D0_L_REG,
+		.event_spec = gp2ap020a00f_event_spec_light,
+		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_light),
+	},
+	{
+		.type = IIO_LIGHT,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 24,
+			.shift = 0,
+			.storagebits = 32,
+			.endianness = IIO_LE,
+		},
+		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR,
+		.address = GP2AP020A00F_D1_L_REG,
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.modified = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.shift = 0,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+		.scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY,
+		.address = GP2AP020A00F_D2_L_REG,
+		.event_spec = gp2ap020a00f_event_spec_prox,
+		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_prox),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP),
+};
+
+static const struct iio_info gp2ap020a00f_info = {
+	.read_raw = &gp2ap020a00f_read_raw,
+	.read_event_value_new = &gp2ap020a00f_read_event_val,
+	.read_event_config_new = &gp2ap020a00f_read_event_config,
+	.write_event_value_new = &gp2ap020a00f_write_event_val,
+	.write_event_config_new = &gp2ap020a00f_write_event_config,
+	.driver_module = THIS_MODULE,
+};
+
+static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int i, err = 0;
+
+	mutex_lock(&data->lock);
+
+	/*
+	 * Enable triggers according to the scan_mask. Enabling either
+	 * LIGHT_CLEAR or LIGHT_IR scan mode results in enabling ALS
+	 * module in the device, which generates samples in both D0 (clear)
+	 * and D1 (ir) registers. As the two registers are bound to the
+	 * two separate IIO channels they are treated in the driver logic
+	 * as if they were controlled independently.
+	 */
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		switch (i) {
+		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_CLEAR_EN);
+			break;
+		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_IR_EN);
+			break;
+		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_PROX_EN);
+			break;
+		}
+	}
+
+	if (err < 0)
+		goto error_unlock;
+
+	data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	if (!data->buffer) {
+		err = -ENOMEM;
+		goto error_unlock;
+	}
+
+	err = iio_triggered_buffer_postenable(indio_dev);
+
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int i, err;
+
+	mutex_lock(&data->lock);
+
+	err = iio_triggered_buffer_predisable(indio_dev);
+	if (err < 0)
+		goto error_unlock;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		switch (i) {
+		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS);
+			break;
+		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_IR_DIS);
+			break;
+		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_PROX_DIS);
+			break;
+		}
+	}
+
+	if (err == 0)
+		kfree(data->buffer);
+
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = {
+	.postenable = &gp2ap020a00f_buffer_postenable,
+	.predisable = &gp2ap020a00f_buffer_predisable,
+};
+
+static const struct iio_trigger_ops gp2ap020a00f_trigger_ops = {
+	.owner = THIS_MODULE,
+};
+
+static int gp2ap020a00f_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct gp2ap020a00f_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int err;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+
+	data->vled_reg = devm_regulator_get(&client->dev, "vled");
+	if (IS_ERR(data->vled_reg))
+		return PTR_ERR(data->vled_reg);
+
+	err = regulator_enable(data->vled_reg);
+	if (err)
+		return err;
+
+	regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Regmap initialization failed.\n");
+		err = PTR_ERR(regmap);
+		goto error_regulator_disable;
+	}
+
+	/* Initialize device registers */
+	err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG,
+			gp2ap020a00f_reg_init_tab,
+			ARRAY_SIZE(gp2ap020a00f_reg_init_tab));
+
+	if (err < 0) {
+		dev_err(&client->dev, "Device initialization failed.\n");
+		goto error_regulator_disable;
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data->client = client;
+	data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
+	data->regmap = regmap;
+	init_waitqueue_head(&data->data_ready_queue);
+
+	mutex_init(&data->lock);
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = gp2ap020a00f_channels;
+	indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels);
+	indio_dev->info = &gp2ap020a00f_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	/* Allocate buffer */
+	err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		&gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops);
+	if (err < 0)
+		goto error_regulator_disable;
+
+	/* Allocate trigger */
+	data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger",
+							indio_dev->name);
+	if (data->trig == NULL) {
+		err = -ENOMEM;
+		dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n");
+		goto error_uninit_buffer;
+	}
+
+	/* This needs to be requested here for read_raw calls to work. */
+	err = request_threaded_irq(client->irq, NULL,
+				   &gp2ap020a00f_thresh_event_handler,
+				   IRQF_TRIGGER_FALLING |
+				   IRQF_ONESHOT,
+				   "gp2ap020a00f_als_event",
+				   indio_dev);
+	if (err < 0) {
+		dev_err(&client->dev, "Irq request failed.\n");
+		goto error_uninit_buffer;
+	}
+
+	data->trig->ops = &gp2ap020a00f_trigger_ops;
+	data->trig->dev.parent = &data->client->dev;
+
+	init_irq_work(&data->work, gp2ap020a00f_iio_trigger_work);
+
+	err = iio_trigger_register(data->trig);
+	if (err < 0) {
+		dev_err(&client->dev, "Failed to register iio trigger.\n");
+		goto error_free_irq;
+	}
+
+	err = iio_device_register(indio_dev);
+	if (err < 0)
+		goto error_trigger_unregister;
+
+	return 0;
+
+error_trigger_unregister:
+	iio_trigger_unregister(data->trig);
+error_free_irq:
+	free_irq(client->irq, indio_dev);
+error_uninit_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_regulator_disable:
+	regulator_disable(data->vled_reg);
+
+	return err;
+}
+
+static int gp2ap020a00f_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int err;
+
+	err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+	if (err < 0)
+		dev_err(&indio_dev->dev, "Failed to power off the device.\n");
+
+	iio_device_unregister(indio_dev);
+	iio_trigger_unregister(data->trig);
+	free_irq(client->irq, indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	regulator_disable(data->vled_reg);
+
+	return 0;
+}
+
+static const struct i2c_device_id gp2ap020a00f_id[] = {
+	{ GP2A_I2C_NAME, 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id gp2ap020a00f_of_match[] = {
+	{ .compatible = "sharp,gp2ap020a00f" },
+	{ }
+};
+#endif
+
+static struct i2c_driver gp2ap020a00f_driver = {
+	.driver = {
+		.name	= GP2A_I2C_NAME,
+		.of_match_table = of_match_ptr(gp2ap020a00f_of_match),
+		.owner	= THIS_MODULE,
+	},
+	.probe		= gp2ap020a00f_probe,
+	.remove		= gp2ap020a00f_remove,
+	.id_table	= gp2ap020a00f_id,
+};
+
+module_i2c_driver(gp2ap020a00f_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index e59d00c..fa6ae8c 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -161,10 +161,11 @@
 };
 
 /* Function to push data to buffer */
-static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
+					int len)
 {
 	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
-	iio_push_to_buffers(indio_dev, (u8 *)data);
+	iio_push_to_buffers(indio_dev, data);
 }
 
 /* Callback handler to send event after all samples are received and captured */
@@ -179,7 +180,7 @@
 				als_state->common_attributes.data_ready);
 	if (als_state->common_attributes.data_ready)
 		hid_sensor_push_data(indio_dev,
-				(u8 *)&als_state->illum,
+				&als_state->illum,
 				sizeof(als_state->illum));
 
 	return 0;
diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c
new file mode 100644
index 0000000..45df220
--- /dev/null
+++ b/drivers/iio/light/tcs3472.c
@@ -0,0 +1,367 @@
+/*
+ * tcs3472.c - Support for TAOS TCS3472 color light-to-digital converter
+ *
+ * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Color light sensor with 16-bit channels for red, green, blue, clear);
+ * 7-bit I2C slave address 0x39 (TCS34721, TCS34723) or 0x29 (TCS34725,
+ * TCS34727)
+ *
+ * TODO: interrupt support, thresholds, wait time
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define TCS3472_DRV_NAME "tcs3472"
+
+#define TCS3472_COMMAND BIT(7)
+#define TCS3472_AUTO_INCR BIT(5)
+
+#define TCS3472_ENABLE (TCS3472_COMMAND | 0x00)
+#define TCS3472_ATIME (TCS3472_COMMAND | 0x01)
+#define TCS3472_WTIME (TCS3472_COMMAND | 0x03)
+#define TCS3472_AILT (TCS3472_COMMAND | 0x04)
+#define TCS3472_AIHT (TCS3472_COMMAND | 0x06)
+#define TCS3472_PERS (TCS3472_COMMAND | 0x0c)
+#define TCS3472_CONFIG (TCS3472_COMMAND | 0x0d)
+#define TCS3472_CONTROL (TCS3472_COMMAND | 0x0f)
+#define TCS3472_ID (TCS3472_COMMAND | 0x12)
+#define TCS3472_STATUS (TCS3472_COMMAND | 0x13)
+#define TCS3472_CDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x14)
+#define TCS3472_RDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x16)
+#define TCS3472_GDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x18)
+#define TCS3472_BDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x1a)
+
+#define TCS3472_STATUS_AVALID BIT(0)
+#define TCS3472_ENABLE_AEN BIT(1)
+#define TCS3472_ENABLE_PON BIT(0)
+#define TCS3472_CONTROL_AGAIN_MASK (BIT(0) | BIT(1))
+
+struct tcs3472_data {
+	struct i2c_client *client;
+	u8 enable;
+	u8 control;
+	u8 atime;
+	u16 buffer[8]; /* 4 16-bit channels + 64-bit timestamp */
+};
+
+#define TCS3472_CHANNEL(_color, _si, _addr) { \
+	.type = IIO_INTENSITY, \
+	.modified = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBSCALE) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
+	.channel2 = IIO_MOD_LIGHT_##_color, \
+	.address = _addr, \
+	.scan_index = _si, \
+	.scan_type = IIO_ST('u', 16, 16, 0), \
+}
+
+static const int tcs3472_agains[] = { 1, 4, 16, 60 };
+
+static const struct iio_chan_spec tcs3472_channels[] = {
+	TCS3472_CHANNEL(CLEAR, 0, TCS3472_CDATA),
+	TCS3472_CHANNEL(RED, 1, TCS3472_RDATA),
+	TCS3472_CHANNEL(GREEN, 2, TCS3472_GDATA),
+	TCS3472_CHANNEL(BLUE, 3, TCS3472_BDATA),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static int tcs3472_req_data(struct tcs3472_data *data)
+{
+	int tries = 50;
+	int ret;
+
+	while (tries--) {
+		ret = i2c_smbus_read_byte_data(data->client, TCS3472_STATUS);
+		if (ret < 0)
+			return ret;
+		if (ret & TCS3472_STATUS_AVALID)
+			break;
+		msleep(20);
+	}
+
+	if (tries < 0) {
+		dev_err(&data->client->dev, "data not ready\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int tcs3472_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct tcs3472_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = tcs3472_req_data(data);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_read_word_data(data->client, chan->address);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		*val = tcs3472_agains[data->control &
+			TCS3472_CONTROL_AGAIN_MASK];
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = 0;
+		*val2 = (256 - data->atime) * 2400;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int tcs3472_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct tcs3472_data *data = iio_priv(indio_dev);
+	int i;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (val2 != 0)
+			return -EINVAL;
+		for (i = 0; i < ARRAY_SIZE(tcs3472_agains); i++) {
+			if (val == tcs3472_agains[i]) {
+				data->control &= ~TCS3472_CONTROL_AGAIN_MASK;
+				data->control |= i;
+				return i2c_smbus_write_byte_data(
+					data->client, TCS3472_CONTROL,
+					data->control);
+			}
+		}
+		return -EINVAL;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val != 0)
+			return -EINVAL;
+		for (i = 0; i < 256; i++) {
+			if (val2 == (256 - i) * 2400) {
+				data->atime = i;
+				return i2c_smbus_write_word_data(
+					data->client, TCS3472_ATIME,
+					data->atime);
+			}
+
+		}
+		return -EINVAL;
+	}
+	return -EINVAL;
+}
+
+static irqreturn_t tcs3472_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct tcs3472_data *data = iio_priv(indio_dev);
+	int len = 0;
+	int i, j = 0;
+
+	int ret = tcs3472_req_data(data);
+	if (ret < 0)
+		goto done;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		ret = i2c_smbus_read_word_data(data->client,
+			TCS3472_CDATA + 2*i);
+		if (ret < 0)
+			goto done;
+
+		data->buffer[j++] = ret;
+		len += 2;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+		iio_get_time_ns());
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t tcs3472_show_int_time_available(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	size_t len = 0;
+	int i;
+
+	for (i = 1; i <= 256; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ",
+			2400 * i);
+
+	/* replace trailing space by newline */
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_CONST_ATTR(calibscale_available, "1 4 16 60");
+static IIO_DEV_ATTR_INT_TIME_AVAIL(tcs3472_show_int_time_available);
+
+static struct attribute *tcs3472_attributes[] = {
+	&iio_const_attr_calibscale_available.dev_attr.attr,
+	&iio_dev_attr_integration_time_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tcs3472_attribute_group = {
+	.attrs = tcs3472_attributes,
+};
+
+static const struct iio_info tcs3472_info = {
+	.read_raw = tcs3472_read_raw,
+	.write_raw = tcs3472_write_raw,
+	.attrs = &tcs3472_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int tcs3472_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct tcs3472_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &tcs3472_info;
+	indio_dev->name = TCS3472_DRV_NAME;
+	indio_dev->channels = tcs3472_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tcs3472_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = i2c_smbus_read_byte_data(data->client, TCS3472_ID);
+	if (ret < 0)
+		return ret;
+
+	if (ret == 0x44)
+		dev_info(&client->dev, "TCS34721/34725 found\n");
+	else if (ret == 0x4d)
+		dev_info(&client->dev, "TCS34723/34727 found\n");
+	else
+		return -ENODEV;
+
+	ret = i2c_smbus_read_byte_data(data->client, TCS3472_CONTROL);
+	if (ret < 0)
+		return ret;
+	data->control = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, TCS3472_ATIME);
+	if (ret < 0)
+		return ret;
+	data->atime = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, TCS3472_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* enable device */
+	data->enable = ret | TCS3472_ENABLE_PON | TCS3472_ENABLE_AEN;
+	ret = i2c_smbus_write_byte_data(data->client, TCS3472_ENABLE,
+		data->enable);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+		tcs3472_trigger_handler, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto buffer_cleanup;
+
+	return 0;
+
+buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+
+static int tcs3472_powerdown(struct tcs3472_data *data)
+{
+	return i2c_smbus_write_byte_data(data->client, TCS3472_ENABLE,
+		data->enable & ~(TCS3472_ENABLE_AEN | TCS3472_ENABLE_PON));
+}
+
+static int tcs3472_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	tcs3472_powerdown(iio_priv(indio_dev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tcs3472_suspend(struct device *dev)
+{
+	struct tcs3472_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	return tcs3472_powerdown(data);
+}
+
+static int tcs3472_resume(struct device *dev)
+{
+	struct tcs3472_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	return i2c_smbus_write_byte_data(data->client, TCS3472_ENABLE,
+		data->enable | (TCS3472_ENABLE_AEN | TCS3472_ENABLE_PON));
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tcs3472_pm_ops, tcs3472_suspend, tcs3472_resume);
+
+static const struct i2c_device_id tcs3472_id[] = {
+	{ "tcs3472", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tcs3472_id);
+
+static struct i2c_driver tcs3472_driver = {
+	.driver = {
+		.name	= TCS3472_DRV_NAME,
+		.pm	= &tcs3472_pm_ops,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= tcs3472_probe,
+	.remove		= tcs3472_remove,
+	.id_table	= tcs3472_id,
+};
+module_i2c_driver(tcs3472_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("TCS3472 color light sensors driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index ebb962c..5e5d9de 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -526,6 +526,20 @@
 	return ret;
 }
 
+static const struct iio_event_spec tsl2563_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
 static const struct iio_chan_spec tsl2563_channels[] = {
 	{
 		.type = IIO_LIGHT,
@@ -538,10 +552,8 @@
 		.channel2 = IIO_MOD_LIGHT_BOTH,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 		BIT(IIO_CHAN_INFO_CALIBSCALE),
-		.event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
-					  IIO_EV_DIR_RISING) |
-			       IIO_EV_BIT(IIO_EV_TYPE_THRESH,
-					  IIO_EV_DIR_FALLING)),
+		.event_spec = tsl2563_events,
+		.num_event_specs = ARRAY_SIZE(tsl2563_events),
 	}, {
 		.type = IIO_INTENSITY,
 		.modified = 1,
@@ -552,12 +564,13 @@
 };
 
 static int tsl2563_read_thresh(struct iio_dev *indio_dev,
-			       u64 event_code,
-			       int *val)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, enum iio_event_info info, int *val,
+	int *val2)
 {
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 
-	switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+	switch (dir) {
 	case IIO_EV_DIR_RISING:
 		*val = chip->high_thres;
 		break;
@@ -568,18 +581,19 @@
 		return -EINVAL;
 	}
 
-	return 0;
+	return IIO_VAL_INT;
 }
 
 static int tsl2563_write_thresh(struct iio_dev *indio_dev,
-				  u64 event_code,
-				  int val)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, enum iio_event_info info, int val,
+	int val2)
 {
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 	int ret;
 	u8 address;
 
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
+	if (dir == IIO_EV_DIR_RISING)
 		address = TSL2563_REG_HIGHLOW;
 	else
 		address = TSL2563_REG_LOWLOW;
@@ -591,7 +605,7 @@
 	ret = i2c_smbus_write_byte_data(chip->client,
 					TSL2563_CMD | (address + 1),
 					(val >> 8) & 0xFF);
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
+	if (dir == IIO_EV_DIR_RISING)
 		chip->high_thres = val;
 	else
 		chip->low_thres = val;
@@ -620,8 +634,8 @@
 }
 
 static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
-					  u64 event_code,
-					  int state)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, int state)
 {
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 	int ret = 0;
@@ -662,7 +676,8 @@
 }
 
 static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
-					 u64 event_code)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir)
 {
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 	int ret;
@@ -687,10 +702,10 @@
 	.driver_module = THIS_MODULE,
 	.read_raw = &tsl2563_read_raw,
 	.write_raw = &tsl2563_write_raw,
-	.read_event_value = &tsl2563_read_thresh,
-	.write_event_value = &tsl2563_write_thresh,
-	.read_event_config = &tsl2563_read_interrupt_config,
-	.write_event_config = &tsl2563_write_interrupt_config,
+	.read_event_value_new = &tsl2563_read_thresh,
+	.write_event_value_new = &tsl2563_write_thresh,
+	.read_event_config_new = &tsl2563_read_interrupt_config,
+	.write_event_config_new = &tsl2563_write_interrupt_config,
 };
 
 static int tsl2563_probe(struct i2c_client *client,
diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
new file mode 100644
index 0000000..a15006e
--- /dev/null
+++ b/drivers/iio/light/tsl4531.c
@@ -0,0 +1,258 @@
+/*
+ * tsl4531.c - Support for TAOS TSL4531 ambient light sensor
+ *
+ * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for the TSL4531x family
+ *   TSL45311/TSL45313: 7-bit I2C slave address 0x39
+ *   TSL45315/TSL45317: 7-bit I2C slave address 0x29
+ *
+ * TODO: single cycle measurement
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define TSL4531_DRV_NAME "tsl4531"
+
+#define TCS3472_COMMAND BIT(7)
+
+#define TSL4531_CONTROL (TCS3472_COMMAND | 0x00)
+#define TSL4531_CONFIG (TCS3472_COMMAND | 0x01)
+#define TSL4531_DATA (TCS3472_COMMAND | 0x04)
+#define TSL4531_ID (TCS3472_COMMAND | 0x0a)
+
+/* operating modes in control register */
+#define TSL4531_MODE_POWERDOWN 0x00
+#define TSL4531_MODE_SINGLE_ADC 0x02
+#define TSL4531_MODE_NORMAL 0x03
+
+/* integration time control in config register */
+#define TSL4531_TCNTRL_400MS 0x00
+#define TSL4531_TCNTRL_200MS 0x01
+#define TSL4531_TCNTRL_100MS 0x02
+
+/* part number in id register */
+#define TSL45311_ID 0x8
+#define TSL45313_ID 0x9
+#define TSL45315_ID 0xa
+#define TSL45317_ID 0xb
+#define TSL4531_ID_SHIFT 4
+
+struct tsl4531_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	int int_time;
+};
+
+static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4");
+
+static struct attribute *tsl4531_attributes[] = {
+	&iio_const_attr_integration_time_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tsl4531_attribute_group = {
+	.attrs = tsl4531_attributes,
+};
+
+static const struct iio_chan_spec tsl4531_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_INT_TIME)
+	}
+};
+
+static int tsl4531_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct tsl4531_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = i2c_smbus_read_word_data(data->client,
+			TSL4531_DATA);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/* 0.. 1x, 1 .. 2x, 2 .. 4x */
+		*val = 1 << data->int_time;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (data->int_time == 0)
+			*val2 = 400000;
+		else if (data->int_time == 1)
+			*val2 = 200000;
+		else if (data->int_time == 2)
+			*val2 = 100000;
+		else
+			return -EINVAL;
+		*val = 0;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl4531_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct tsl4531_data *data = iio_priv(indio_dev);
+	int int_time, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val != 0)
+			return -EINVAL;
+		if (val2 == 400000)
+			int_time = 0;
+		else if (val2 == 200000)
+			int_time = 1;
+		else if (val2 == 100000)
+			int_time = 2;
+		else
+			return -EINVAL;
+		mutex_lock(&data->lock);
+		ret = i2c_smbus_write_byte_data(data->client,
+			TSL4531_CONFIG, int_time);
+		if (ret >= 0)
+			data->int_time = int_time;
+		mutex_unlock(&data->lock);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info tsl4531_info = {
+	.read_raw = tsl4531_read_raw,
+	.write_raw = tsl4531_write_raw,
+	.attrs = &tsl4531_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int tsl4531_check_id(struct i2c_client *client)
+{
+	int ret = i2c_smbus_read_byte_data(client, TSL4531_ID);
+	if (ret < 0)
+		return ret;
+
+	switch (ret >> TSL4531_ID_SHIFT) {
+	case TSL45311_ID:
+	case TSL45313_ID:
+	case TSL45315_ID:
+	case TSL45317_ID:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static int tsl4531_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct tsl4531_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	if (!tsl4531_check_id(client)) {
+		dev_err(&client->dev, "no TSL4531 sensor\n");
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL,
+		TSL4531_MODE_NORMAL);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG,
+		TSL4531_TCNTRL_400MS);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &tsl4531_info;
+	indio_dev->channels = tsl4531_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels);
+	indio_dev->name = TSL4531_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return iio_device_register(indio_dev);
+}
+
+static int tsl4531_powerdown(struct i2c_client *client)
+{
+	return i2c_smbus_write_byte_data(client, TSL4531_CONTROL,
+		TSL4531_MODE_POWERDOWN);
+}
+
+static int tsl4531_remove(struct i2c_client *client)
+{
+	iio_device_unregister(i2c_get_clientdata(client));
+	tsl4531_powerdown(client);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tsl4531_suspend(struct device *dev)
+{
+	return tsl4531_powerdown(to_i2c_client(dev));
+}
+
+static int tsl4531_resume(struct device *dev)
+{
+	return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
+		TSL4531_MODE_NORMAL);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume);
+
+static const struct i2c_device_id tsl4531_id[] = {
+	{ "tsl4531", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tsl4531_id);
+
+static struct i2c_driver tsl4531_driver = {
+	.driver = {
+		.name   = TSL4531_DRV_NAME,
+		.pm	= &tsl4531_pm_ops,
+		.owner  = THIS_MODULE,
+	},
+	.probe  = tsl4531_probe,
+	.remove = tsl4531_remove,
+	.id_table = tsl4531_id,
+};
+
+module_i2c_driver(tsl4531_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 2bb3042..ecb3341 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -179,11 +179,7 @@
 	indio_dev->name = VCNL4000_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0)
-		return ret;
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int vcnl4000_remove(struct i2c_client *client)
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 4fa923f..0cf0963 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -16,6 +16,16 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called ak8975.
 
+config MAG3110
+	tristate "Freescale MAG3110 3-Axis Magnetometer"
+	depends on I2C
+	help
+	  Say yes here to build support for the Freescale MAG3110 3-Axis
+	  magnetometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mag3110.
+
 config HID_SENSOR_MAGNETOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
index f91b1b6..0f5d3c9 100644
--- a/drivers/iio/magnetometer/Makefile
+++ b/drivers/iio/magnetometer/Makefile
@@ -4,6 +4,7 @@
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AK8975)	+= ak8975.o
+obj-$(CONFIG_MAG3110)	+= mag3110.o
 obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
 
 obj-$(CONFIG_IIO_ST_MAGN_3AXIS) += st_magn.o
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index 7105f22..ff284e5 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -263,7 +263,7 @@
  *
  * HuT = H * 1229/4096, or roughly, 3/10.
  *
- * Since 1uT = 100 gauss, our final scale factor becomes:
+ * Since 1uT = 0.01 gauss, our final scale factor becomes:
  *
  * Hadj = H * ((ASA + 128) / 256) * 3/10 * 100
  * Hadj = H * ((ASA + 128) * 30 / 256
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index a98460b..2634920 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -183,10 +183,11 @@
 };
 
 /* Function to push data to buffer */
-static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
+	int len)
 {
 	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
-	iio_push_to_buffers(indio_dev, (u8 *)data);
+	iio_push_to_buffers(indio_dev, data);
 }
 
 /* Callback handler to send event after all samples are received and captured */
@@ -201,7 +202,7 @@
 				magn_state->common_attributes.data_ready);
 	if (magn_state->common_attributes.data_ready)
 		hid_sensor_push_data(indio_dev,
-				(u8 *)magn_state->magn_val,
+				magn_state->magn_val,
 				sizeof(magn_state->magn_val));
 
 	return 0;
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
new file mode 100644
index 0000000..783c5b4
--- /dev/null
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -0,0 +1,401 @@
+/*
+ * mag3110.c - Support for Freescale MAG3110 magnetometer sensor
+ *
+ * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x0e)
+ *
+ * TODO: irq, user offset, oversampling, continuous mode
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/delay.h>
+
+#define MAG3110_STATUS 0x00
+#define MAG3110_OUT_X 0x01 /* MSB first */
+#define MAG3110_OUT_Y 0x03
+#define MAG3110_OUT_Z 0x05
+#define MAG3110_WHO_AM_I 0x07
+#define MAG3110_OFF_X 0x09 /* MSB first */
+#define MAG3110_OFF_Y 0x0b
+#define MAG3110_OFF_Z 0x0d
+#define MAG3110_DIE_TEMP 0x0f
+#define MAG3110_CTRL_REG1 0x10
+#define MAG3110_CTRL_REG2 0x11
+
+#define MAG3110_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
+
+#define MAG3110_CTRL_DR_MASK (BIT(7) | BIT(6) | BIT(5))
+#define MAG3110_CTRL_DR_SHIFT 5
+#define MAG3110_CTRL_DR_DEFAULT 0
+
+#define MAG3110_CTRL_TM BIT(1) /* trigger single measurement */
+#define MAG3110_CTRL_AC BIT(0) /* continuous measurements */
+
+#define MAG3110_CTRL_AUTO_MRST_EN BIT(7) /* magnetic auto-reset */
+#define MAG3110_CTRL_RAW BIT(5) /* measurements not user-offset corrected */
+
+#define MAG3110_DEVICE_ID 0xc4
+
+/* Each client has this additional data */
+struct mag3110_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 ctrl_reg1;
+};
+
+static int mag3110_request(struct mag3110_data *data)
+{
+	int ret, tries = 150;
+
+	/* trigger measurement */
+	ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1 | MAG3110_CTRL_TM);
+	if (ret < 0)
+		return ret;
+
+	while (tries-- > 0) {
+		ret = i2c_smbus_read_byte_data(data->client, MAG3110_STATUS);
+		if (ret < 0)
+			return ret;
+		/* wait for data ready */
+		if ((ret & MAG3110_STATUS_DRDY) == MAG3110_STATUS_DRDY)
+			break;
+		msleep(20);
+	}
+
+	if (tries < 0) {
+		dev_err(&data->client->dev, "data not ready\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mag3110_read(struct mag3110_data *data, __be16 buf[3])
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = mag3110_request(data);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+	ret = i2c_smbus_read_i2c_block_data(data->client,
+		MAG3110_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static ssize_t mag3110_show_int_plus_micros(char *buf,
+	const int (*vals)[2], int n)
+{
+	size_t len = 0;
+
+	while (n-- > 0)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			"%d.%d ", vals[n][0], vals[n][1]);
+
+	/* replace trailing space by newline */
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static int mag3110_get_int_plus_micros_index(const int (*vals)[2], int n,
+					int val, int val2)
+{
+	while (n-- > 0)
+		if (val == vals[n][0] && val2 == vals[n][1])
+			return n;
+
+	return -EINVAL;
+}
+
+static const int mag3110_samp_freq[8][2] = {
+	{80, 0}, {40, 0}, {20, 0}, {10, 0}, {5, 0}, {2, 500000},
+	{1, 250000}, {0, 625000}
+};
+
+static ssize_t mag3110_show_samp_freq_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return mag3110_show_int_plus_micros(buf, mag3110_samp_freq, 8);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mag3110_show_samp_freq_avail);
+
+static int mag3110_get_samp_freq_index(struct mag3110_data *data,
+	int val, int val2)
+{
+	return mag3110_get_int_plus_micros_index(mag3110_samp_freq, 8, val,
+		val2);
+}
+
+static int mag3110_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mag3110_data *data = iio_priv(indio_dev);
+	__be16 buffer[3];
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_MAGN: /* in 0.1 uT / LSB */
+			ret = mag3110_read(data, buffer);
+			if (ret < 0)
+				return ret;
+			*val = sign_extend32(
+				be16_to_cpu(buffer[chan->scan_index]), 15);
+			return IIO_VAL_INT;
+		case IIO_TEMP: /* in 1 C / LSB */
+			mutex_lock(&data->lock);
+			ret = mag3110_request(data);
+			if (ret < 0) {
+				mutex_unlock(&data->lock);
+				return ret;
+			}
+			ret = i2c_smbus_read_byte_data(data->client,
+				MAG3110_DIE_TEMP);
+			mutex_unlock(&data->lock);
+			if (ret < 0)
+				return ret;
+			*val = sign_extend32(ret, 7);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		i = data->ctrl_reg1 >> MAG3110_CTRL_DR_SHIFT;
+		*val = mag3110_samp_freq[i][0];
+		*val2 = mag3110_samp_freq[i][1];
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int mag3110_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct mag3110_data *data = iio_priv(indio_dev);
+	int rate;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		rate = mag3110_get_samp_freq_index(data, val, val2);
+		if (rate < 0)
+			return -EINVAL;
+
+		data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK;
+		data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT;
+		return i2c_smbus_write_byte_data(data->client,
+			MAG3110_CTRL_REG1, data->ctrl_reg1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t mag3110_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mag3110_data *data = iio_priv(indio_dev);
+	u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
+	int ret;
+
+	ret = mag3110_read(data, (__be16 *) buffer);
+	if (ret < 0)
+		goto done;
+
+	if (test_bit(3, indio_dev->active_scan_mask)) {
+		ret = i2c_smbus_read_byte_data(data->client,
+			MAG3110_DIE_TEMP);
+		if (ret < 0)
+			goto done;
+		buffer[6] = ret;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+		iio_get_time_ns());
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+#define MAG3110_CHANNEL(axis, idx) { \
+	.type = IIO_MAGN, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_##axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.scan_index = idx, \
+	.scan_type = IIO_ST('s', 16, 16, IIO_BE), \
+}
+
+static const struct iio_chan_spec mag3110_channels[] = {
+	MAG3110_CHANNEL(X, 0),
+	MAG3110_CHANNEL(Y, 1),
+	MAG3110_CHANNEL(Z, 2),
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = 3,
+		.scan_type = IIO_ST('s', 8, 8, 0),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static struct attribute *mag3110_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mag3110_group = {
+	.attrs = mag3110_attributes,
+};
+
+static const struct iio_info mag3110_info = {
+	.attrs = &mag3110_group,
+	.read_raw = &mag3110_read_raw,
+	.write_raw = &mag3110_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static const unsigned long mag3110_scan_masks[] = {0x7, 0xf, 0};
+
+static int mag3110_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct mag3110_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
+	if (ret < 0)
+		return ret;
+	if (ret != MAG3110_DEVICE_ID)
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	i2c_set_clientdata(client, indio_dev);
+	indio_dev->info = &mag3110_info;
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mag3110_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mag3110_channels);
+	indio_dev->available_scan_masks = mag3110_scan_masks;
+
+	data->ctrl_reg1 = MAG3110_CTRL_DR_DEFAULT;
+	ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
+		MAG3110_CTRL_AUTO_MRST_EN | MAG3110_CTRL_RAW);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+		mag3110_trigger_handler, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto buffer_cleanup;
+	return 0;
+
+buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+
+static int mag3110_standby(struct mag3110_data *data)
+{
+	return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1 & ~MAG3110_CTRL_AC);
+}
+
+static int mag3110_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	mag3110_standby(iio_priv(indio_dev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mag3110_suspend(struct device *dev)
+{
+	return mag3110_standby(iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev))));
+}
+
+static int mag3110_resume(struct device *dev)
+{
+	struct mag3110_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+
+	return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1);
+}
+
+static SIMPLE_DEV_PM_OPS(mag3110_pm_ops, mag3110_suspend, mag3110_resume);
+#define MAG3110_PM_OPS (&mag3110_pm_ops)
+#else
+#define MAG3110_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id mag3110_id[] = {
+	{ "mag3110", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mag3110_id);
+
+static struct i2c_driver mag3110_driver = {
+	.driver = {
+		.name	= "mag3110",
+		.pm	= MAG3110_PM_OPS,
+	},
+	.probe = mag3110_probe,
+	.remove = mag3110_remove,
+	.id_table = mag3110_id,
+};
+module_i2c_driver(mag3110_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MAG3110 magnetometer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c
index 708857b..bf427dc 100644
--- a/drivers/iio/magnetometer/st_magn_buffer.c
+++ b/drivers/iio/magnetometer/st_magn_buffer.c
@@ -25,16 +25,7 @@
 
 static int st_magn_buffer_preenable(struct iio_dev *indio_dev)
 {
-	int err;
-
-	err = st_sensors_set_enable(indio_dev, true);
-	if (err < 0)
-		goto st_magn_set_enable_error;
-
-	err = iio_sw_buffer_preenable(indio_dev);
-
-st_magn_set_enable_error:
-	return err;
+	return st_sensors_set_enable(indio_dev, true);
 }
 
 static int st_magn_buffer_postenable(struct iio_dev *indio_dev)
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index cab3bc7..52bbcfa 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -348,8 +348,9 @@
 int st_magn_common_probe(struct iio_dev *indio_dev,
 					struct st_sensors_platform_data *pdata)
 {
-	int err;
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
+	int irq = mdata->get_irq_data_ready(indio_dev);
+	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &magn_info;
@@ -357,7 +358,7 @@
 	err = st_sensors_check_device_support(indio_dev,
 				ARRAY_SIZE(st_magn_sensors), st_magn_sensors);
 	if (err < 0)
-		goto st_magn_common_probe_error;
+		return err;
 
 	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
 	mdata->multiread_bit = mdata->sensor->multi_read_bit;
@@ -370,12 +371,13 @@
 
 	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
-		goto st_magn_common_probe_error;
+		return err;
 
-	if (mdata->get_irq_data_ready(indio_dev) > 0) {
-		err = st_magn_allocate_ring(indio_dev);
-		if (err < 0)
-			goto st_magn_common_probe_error;
+	err = st_magn_allocate_ring(indio_dev);
+	if (err < 0)
+		return err;
+
+	if (irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev, NULL);
 		if (err < 0)
 			goto st_magn_probe_trigger_error;
@@ -385,15 +387,14 @@
 	if (err)
 		goto st_magn_device_register_error;
 
-	return err;
+	return 0;
 
 st_magn_device_register_error:
-	if (mdata->get_irq_data_ready(indio_dev) > 0)
+	if (irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_magn_probe_trigger_error:
-	if (mdata->get_irq_data_ready(indio_dev) > 0)
-		st_magn_deallocate_ring(indio_dev);
-st_magn_common_probe_error:
+	st_magn_deallocate_ring(indio_dev);
+
 	return err;
 }
 EXPORT_SYMBOL(st_magn_common_probe);
@@ -403,10 +404,10 @@
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (mdata->get_irq_data_ready(indio_dev) > 0) {
+	if (mdata->get_irq_data_ready(indio_dev) > 0)
 		st_sensors_deallocate_trigger(indio_dev);
-		st_magn_deallocate_ring(indio_dev);
-	}
+
+	st_magn_deallocate_ring(indio_dev);
 }
 EXPORT_SYMBOL(st_magn_common_remove);
 
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 26fdc0b..4f2e0f9 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -14,7 +14,7 @@
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics pressure
-	  sensors: LPS331AP.
+	  sensors: LPS001WP, LPS331AP.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index b0b6306..049c21a 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/iio/common/st_sensors.h>
 
+#define LPS001WP_PRESS_DEV_NAME		"lps001wp"
 #define LPS331AP_PRESS_DEV_NAME		"lps331ap"
 
 /**
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index f877ef8..b37b1c9 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -32,16 +32,7 @@
 
 static int st_press_buffer_preenable(struct iio_dev *indio_dev)
 {
-	int err;
-
-	err = st_sensors_set_enable(indio_dev, true);
-	if (err < 0)
-		goto st_press_set_enable_error;
-
-	err = iio_sw_buffer_preenable(indio_dev);
-
-st_press_set_enable_error:
-	return err;
+	return st_sensors_set_enable(indio_dev, true);
 }
 
 static int st_press_buffer_postenable(struct iio_dev *indio_dev)
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index ceebd3c..58083f9 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -23,6 +23,7 @@
 #include <linux/iio/sysfs.h>
 #include <linux/iio/trigger.h>
 #include <linux/iio/buffer.h>
+#include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>
 
 #include <linux/iio/common/st_sensors.h>
@@ -36,94 +37,200 @@
 						 ST_PRESS_LSB_PER_CELSIUS)
 #define ST_PRESS_NUMBER_DATA_CHANNELS		1
 
-/* DEFAULT VALUE FOR SENSORS */
-#define ST_PRESS_DEFAULT_OUT_XL_ADDR		0x28
-#define ST_TEMP_DEFAULT_OUT_L_ADDR		0x2b
-
 /* FULLSCALE */
 #define ST_PRESS_FS_AVL_1260MB			1260
 
-/* CUSTOM VALUES FOR SENSOR 1 */
-#define ST_PRESS_1_WAI_EXP			0xbb
-#define ST_PRESS_1_ODR_ADDR			0x20
-#define ST_PRESS_1_ODR_MASK			0x70
-#define ST_PRESS_1_ODR_AVL_1HZ_VAL		0x01
-#define ST_PRESS_1_ODR_AVL_7HZ_VAL		0x05
-#define ST_PRESS_1_ODR_AVL_13HZ_VAL		0x06
-#define ST_PRESS_1_ODR_AVL_25HZ_VAL		0x07
-#define ST_PRESS_1_PW_ADDR			0x20
-#define ST_PRESS_1_PW_MASK			0x80
-#define ST_PRESS_1_FS_ADDR			0x23
-#define ST_PRESS_1_FS_MASK			0x30
-#define ST_PRESS_1_FS_AVL_1260_VAL		0x00
-#define ST_PRESS_1_FS_AVL_1260_GAIN		ST_PRESS_KPASCAL_NANO_SCALE
-#define ST_PRESS_1_FS_AVL_TEMP_GAIN		ST_PRESS_CELSIUS_NANO_SCALE
-#define ST_PRESS_1_BDU_ADDR			0x20
-#define ST_PRESS_1_BDU_MASK			0x04
-#define ST_PRESS_1_DRDY_IRQ_ADDR		0x22
-#define ST_PRESS_1_DRDY_IRQ_INT1_MASK		0x04
-#define ST_PRESS_1_DRDY_IRQ_INT2_MASK		0x20
-#define ST_PRESS_1_MULTIREAD_BIT		true
-#define ST_PRESS_1_TEMP_OFFSET			42500
+/* CUSTOM VALUES FOR LPS331AP SENSOR */
+#define ST_PRESS_LPS331AP_WAI_EXP		0xbb
+#define ST_PRESS_LPS331AP_ODR_ADDR		0x20
+#define ST_PRESS_LPS331AP_ODR_MASK		0x70
+#define ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL	0x01
+#define ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL	0x05
+#define ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL	0x06
+#define ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL	0x07
+#define ST_PRESS_LPS331AP_PW_ADDR		0x20
+#define ST_PRESS_LPS331AP_PW_MASK		0x80
+#define ST_PRESS_LPS331AP_FS_ADDR		0x23
+#define ST_PRESS_LPS331AP_FS_MASK		0x30
+#define ST_PRESS_LPS331AP_FS_AVL_1260_VAL	0x00
+#define ST_PRESS_LPS331AP_FS_AVL_1260_GAIN	ST_PRESS_KPASCAL_NANO_SCALE
+#define ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN	ST_PRESS_CELSIUS_NANO_SCALE
+#define ST_PRESS_LPS331AP_BDU_ADDR		0x20
+#define ST_PRESS_LPS331AP_BDU_MASK		0x04
+#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR		0x22
+#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK	0x04
+#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK	0x20
+#define ST_PRESS_LPS331AP_MULTIREAD_BIT		true
+#define ST_PRESS_LPS331AP_TEMP_OFFSET		42500
+#define ST_PRESS_LPS331AP_OUT_XL_ADDR		0x28
+#define ST_TEMP_LPS331AP_OUT_L_ADDR		0x2b
 
-static const struct iio_chan_spec st_press_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE,
+/* CUSTOM VALUES FOR LPS001WP SENSOR */
+#define ST_PRESS_LPS001WP_WAI_EXP		0xba
+#define ST_PRESS_LPS001WP_ODR_ADDR		0x20
+#define ST_PRESS_LPS001WP_ODR_MASK		0x30
+#define ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL	0x01
+#define ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL	0x02
+#define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL	0x03
+#define ST_PRESS_LPS001WP_PW_ADDR		0x20
+#define ST_PRESS_LPS001WP_PW_MASK		0x40
+#define ST_PRESS_LPS001WP_BDU_ADDR		0x20
+#define ST_PRESS_LPS001WP_BDU_MASK		0x04
+#define ST_PRESS_LPS001WP_MULTIREAD_BIT		true
+#define ST_PRESS_LPS001WP_OUT_L_ADDR		0x28
+#define ST_TEMP_LPS001WP_OUT_L_ADDR		0x2a
+
+static const struct iio_chan_spec st_press_lps331ap_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.channel2 = IIO_NO_MOD,
+		.address = ST_PRESS_LPS331AP_OUT_XL_ADDR,
+		.scan_index = ST_SENSORS_SCAN_X,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 24,
+			.storagebits = 24,
+			.endianness = IIO_LE,
+		},
+		.info_mask_separate =
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-			ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24,
-			ST_PRESS_DEFAULT_OUT_XL_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_TEMP,
-			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
-						BIT(IIO_CHAN_INFO_OFFSET),
-			-1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16,
-			ST_TEMP_DEFAULT_OUT_L_ADDR),
+		.modified = 0,
+	},
+	{
+		.type = IIO_TEMP,
+		.channel2 = IIO_NO_MOD,
+		.address = ST_TEMP_LPS331AP_OUT_L_ADDR,
+		.scan_index = -1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.modified = 0,
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+static const struct iio_chan_spec st_press_lps001wp_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.channel2 = IIO_NO_MOD,
+		.address = ST_PRESS_LPS001WP_OUT_L_ADDR,
+		.scan_index = ST_SENSORS_SCAN_X,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.modified = 0,
+	},
+	{
+		.type = IIO_TEMP,
+		.channel2 = IIO_NO_MOD,
+		.address = ST_TEMP_LPS001WP_OUT_L_ADDR,
+		.scan_index = -1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.modified = 0,
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(1)
 };
 
 static const struct st_sensors st_press_sensors[] = {
 	{
-		.wai = ST_PRESS_1_WAI_EXP,
+		.wai = ST_PRESS_LPS331AP_WAI_EXP,
 		.sensors_supported = {
 			[0] = LPS331AP_PRESS_DEV_NAME,
 		},
-		.ch = (struct iio_chan_spec *)st_press_channels,
+		.ch = (struct iio_chan_spec *)st_press_lps331ap_channels,
+		.num_ch = ARRAY_SIZE(st_press_lps331ap_channels),
 		.odr = {
-			.addr = ST_PRESS_1_ODR_ADDR,
-			.mask = ST_PRESS_1_ODR_MASK,
+			.addr = ST_PRESS_LPS331AP_ODR_ADDR,
+			.mask = ST_PRESS_LPS331AP_ODR_MASK,
 			.odr_avl = {
-				{ 1, ST_PRESS_1_ODR_AVL_1HZ_VAL, },
-				{ 7, ST_PRESS_1_ODR_AVL_7HZ_VAL, },
-				{ 13, ST_PRESS_1_ODR_AVL_13HZ_VAL, },
-				{ 25, ST_PRESS_1_ODR_AVL_25HZ_VAL, },
+				{ 1, ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL, },
+				{ 7, ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL, },
+				{ 13, ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL, },
+				{ 25, ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL, },
 			},
 		},
 		.pw = {
-			.addr = ST_PRESS_1_PW_ADDR,
-			.mask = ST_PRESS_1_PW_MASK,
+			.addr = ST_PRESS_LPS331AP_PW_ADDR,
+			.mask = ST_PRESS_LPS331AP_PW_MASK,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.fs = {
-			.addr = ST_PRESS_1_FS_ADDR,
-			.mask = ST_PRESS_1_FS_MASK,
+			.addr = ST_PRESS_LPS331AP_FS_ADDR,
+			.mask = ST_PRESS_LPS331AP_FS_MASK,
 			.fs_avl = {
 				[0] = {
 					.num = ST_PRESS_FS_AVL_1260MB,
-					.value = ST_PRESS_1_FS_AVL_1260_VAL,
-					.gain = ST_PRESS_1_FS_AVL_1260_GAIN,
-					.gain2 = ST_PRESS_1_FS_AVL_TEMP_GAIN,
+					.value = ST_PRESS_LPS331AP_FS_AVL_1260_VAL,
+					.gain = ST_PRESS_LPS331AP_FS_AVL_1260_GAIN,
+					.gain2 = ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN,
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_PRESS_1_BDU_ADDR,
-			.mask = ST_PRESS_1_BDU_MASK,
+			.addr = ST_PRESS_LPS331AP_BDU_ADDR,
+			.mask = ST_PRESS_LPS331AP_BDU_MASK,
 		},
 		.drdy_irq = {
-			.addr = ST_PRESS_1_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_PRESS_1_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_PRESS_1_DRDY_IRQ_INT2_MASK,
+			.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
+			.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
 		},
-		.multi_read_bit = ST_PRESS_1_MULTIREAD_BIT,
+		.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
+		.bootime = 2,
+	},
+	{
+		.wai = ST_PRESS_LPS001WP_WAI_EXP,
+		.sensors_supported = {
+			[0] = LPS001WP_PRESS_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_press_lps001wp_channels,
+		.num_ch = ARRAY_SIZE(st_press_lps001wp_channels),
+		.odr = {
+			.addr = ST_PRESS_LPS001WP_ODR_ADDR,
+			.mask = ST_PRESS_LPS001WP_ODR_MASK,
+			.odr_avl = {
+				{ 1, ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL, },
+				{ 7, ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL, },
+				{ 13, ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_PRESS_LPS001WP_PW_ADDR,
+			.mask = ST_PRESS_LPS001WP_PW_MASK,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.addr = 0,
+		},
+		.bdu = {
+			.addr = ST_PRESS_LPS001WP_BDU_ADDR,
+			.mask = ST_PRESS_LPS001WP_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = 0,
+		},
+		.multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT,
 		.bootime = 2,
 	},
 };
@@ -207,44 +314,85 @@
 #define ST_PRESS_TRIGGER_OPS NULL
 #endif
 
+static void st_press_power_enable(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	int err;
+
+	/* Regulators not mandatory, but if requested we should enable them. */
+	pdata->vdd = devm_regulator_get_optional(&indio_dev->dev, "vdd");
+	if (!IS_ERR(pdata->vdd)) {
+		err = regulator_enable(pdata->vdd);
+		if (err != 0)
+			dev_warn(&indio_dev->dev,
+				 "Failed to enable specified Vdd supply\n");
+	}
+
+	pdata->vdd_io = devm_regulator_get_optional(&indio_dev->dev, "vddio");
+	if (!IS_ERR(pdata->vdd_io)) {
+		err = regulator_enable(pdata->vdd_io);
+		if (err != 0)
+			dev_warn(&indio_dev->dev,
+				 "Failed to enable specified Vdd_IO supply\n");
+	}
+}
+
+static void st_press_power_disable(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	if (!IS_ERR(pdata->vdd))
+		regulator_disable(pdata->vdd);
+
+	if (!IS_ERR(pdata->vdd_io))
+		regulator_disable(pdata->vdd_io);
+}
+
 int st_press_common_probe(struct iio_dev *indio_dev,
 				struct st_sensors_platform_data *plat_data)
 {
-	int err;
 	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	int irq = pdata->get_irq_data_ready(indio_dev);
+	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &press_info;
 
+	st_press_power_enable(indio_dev);
+
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_press_sensors), st_press_sensors);
+					      ARRAY_SIZE(st_press_sensors),
+					      st_press_sensors);
 	if (err < 0)
-		goto st_press_common_probe_error;
+		return err;
 
 	pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
-	pdata->multiread_bit = pdata->sensor->multi_read_bit;
-	indio_dev->channels = pdata->sensor->ch;
-	indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
+	pdata->multiread_bit     = pdata->sensor->multi_read_bit;
+	indio_dev->channels      = pdata->sensor->ch;
+	indio_dev->num_channels  = pdata->sensor->num_ch;
 
-	pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&pdata->sensor->fs.fs_avl[0];
+	if (pdata->sensor->fs.addr != 0)
+		pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
+			&pdata->sensor->fs.fs_avl[0];
+
 	pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
 
-	if (!plat_data)
+	/* Some devices don't support a data ready pin. */
+	if (!plat_data && pdata->sensor->drdy_irq.addr)
 		plat_data =
 			(struct st_sensors_platform_data *)&default_press_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, plat_data);
 	if (err < 0)
-		goto st_press_common_probe_error;
+		return err;
 
-	if (pdata->get_irq_data_ready(indio_dev) > 0) {
-		err = st_press_allocate_ring(indio_dev);
-		if (err < 0)
-			goto st_press_common_probe_error;
+	err = st_press_allocate_ring(indio_dev);
+	if (err < 0)
+		return err;
 
+	if (irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
-							ST_PRESS_TRIGGER_OPS);
+						  ST_PRESS_TRIGGER_OPS);
 		if (err < 0)
 			goto st_press_probe_trigger_error;
 	}
@@ -256,12 +404,11 @@
 	return err;
 
 st_press_device_register_error:
-	if (pdata->get_irq_data_ready(indio_dev) > 0)
+	if (irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_press_probe_trigger_error:
-	if (pdata->get_irq_data_ready(indio_dev) > 0)
-		st_press_deallocate_ring(indio_dev);
-st_press_common_probe_error:
+	st_press_deallocate_ring(indio_dev);
+
 	return err;
 }
 EXPORT_SYMBOL(st_press_common_probe);
@@ -270,11 +417,13 @@
 {
 	struct st_sensor_data *pdata = iio_priv(indio_dev);
 
+	st_press_power_disable(indio_dev);
+
 	iio_device_unregister(indio_dev);
-	if (pdata->get_irq_data_ready(indio_dev) > 0) {
+	if (pdata->get_irq_data_ready(indio_dev) > 0)
 		st_sensors_deallocate_trigger(indio_dev);
-		st_press_deallocate_ring(indio_dev);
-	}
+
+	st_press_deallocate_ring(indio_dev);
 }
 EXPORT_SYMBOL(st_press_common_remove);
 
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 08aac5e..51eab7f 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -49,6 +49,7 @@
 }
 
 static const struct i2c_device_id st_press_id_table[] = {
+	{ LPS001WP_PRESS_DEV_NAME },
 	{ LPS331AP_PRESS_DEV_NAME },
 	{},
 };
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 399a29b..27322af 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -48,6 +48,7 @@
 }
 
 static const struct spi_device_id st_press_id_table[] = {
+	{ LPS001WP_PRESS_DEV_NAME },
 	{ LPS331AP_PRESS_DEV_NAME },
 	{},
 };
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
index 6d63883..84a0789 100644
--- a/drivers/iio/temperature/tmp006.c
+++ b/drivers/iio/temperature/tmp006.c
@@ -70,12 +70,16 @@
 	return i2c_smbus_read_word_swapped(data->client, reg);
 }
 
+static const int tmp006_freqs[5][2] = { {4, 0}, {2, 0}, {1, 0},
+					{0, 500000}, {0, 250000} };
+
 static int tmp006_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *channel, int *val,
 			    int *val2, long mask)
 {
 	struct tmp006_data *data = iio_priv(indio_dev);
 	s32 ret;
+	int cr;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
@@ -106,6 +110,12 @@
 			break;
 		}
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		cr = (data->config & TMP006_CONFIG_CR_MASK)
+			>> TMP006_CONFIG_CR_SHIFT;
+		*val = tmp006_freqs[cr][0];
+		*val2 = tmp006_freqs[cr][1];
+		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		break;
 	}
@@ -113,48 +123,32 @@
 	return -EINVAL;
 }
 
-static const char * const tmp006_freqs[] = { "4", "2", "1", "0.5", "0.25" };
-
-static ssize_t tmp006_show_freq(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static int tmp006_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
 {
-	struct tmp006_data *data = iio_priv(dev_to_iio_dev(dev));
-	int cr = (data->config & TMP006_CONFIG_CR_MASK)
-		>> TMP006_CONFIG_CR_SHIFT;
-	return sprintf(buf, "%s\n", tmp006_freqs[cr]);
-}
-
-static ssize_t tmp006_store_freq(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tmp006_data *data = iio_priv(indio_dev);
 	int i;
-	bool found = false;
 
 	for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++)
-		if (sysfs_streq(buf, tmp006_freqs[i])) {
-			found = true;
-			break;
+		if ((val == tmp006_freqs[i][0]) &&
+		    (val2 == tmp006_freqs[i][1])) {
+			data->config &= ~TMP006_CONFIG_CR_MASK;
+			data->config |= i << TMP006_CONFIG_CR_SHIFT;
+
+			return i2c_smbus_write_word_swapped(data->client,
+							    TMP006_CONFIG,
+							    data->config);
+
 		}
-	if (!found)
-		return -EINVAL;
-
-	data->config &= ~TMP006_CONFIG_CR_MASK;
-	data->config |= i << TMP006_CONFIG_CR_SHIFT;
-
-	return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
-		data->config);
+	return -EINVAL;
 }
 
-static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR,
-			tmp006_show_freq, tmp006_store_freq);
-
 static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25");
 
 static struct attribute *tmp006_attributes[] = {
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
 	NULL
 };
@@ -168,16 +162,19 @@
 		.type = IIO_VOLTAGE,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 			BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 	},
 	{
 		.type = IIO_TEMP,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 			BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 	}
 };
 
 static const struct iio_info tmp006_info = {
 	.read_raw = tmp006_read_raw,
+	.write_raw = tmp006_write_raw,
 	.attrs = &tmp006_attribute_group,
 	.driver_module = THIS_MODULE,
 };
diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
index effcd0a..15e3b85 100644
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -23,7 +23,7 @@
 };
 
 static LIST_HEAD(iio_sysfs_trig_list);
-static DEFINE_MUTEX(iio_syfs_trig_list_mut);
+static DEFINE_MUTEX(iio_sysfs_trig_list_mut);
 
 static int iio_sysfs_trigger_probe(int id);
 static ssize_t iio_sysfs_trig_add(struct device *dev,
@@ -135,7 +135,7 @@
 	struct iio_sysfs_trig *t;
 	int ret;
 	bool foundit = false;
-	mutex_lock(&iio_syfs_trig_list_mut);
+	mutex_lock(&iio_sysfs_trig_list_mut);
 	list_for_each_entry(t, &iio_sysfs_trig_list, l)
 		if (id == t->id) {
 			foundit = true;
@@ -169,7 +169,7 @@
 		goto out2;
 	list_add(&t->l, &iio_sysfs_trig_list);
 	__module_get(THIS_MODULE);
-	mutex_unlock(&iio_syfs_trig_list_mut);
+	mutex_unlock(&iio_sysfs_trig_list_mut);
 	return 0;
 
 out2:
@@ -177,7 +177,7 @@
 free_t:
 	kfree(t);
 out1:
-	mutex_unlock(&iio_syfs_trig_list_mut);
+	mutex_unlock(&iio_sysfs_trig_list_mut);
 	return ret;
 }
 
@@ -185,14 +185,14 @@
 {
 	bool foundit = false;
 	struct iio_sysfs_trig *t;
-	mutex_lock(&iio_syfs_trig_list_mut);
+	mutex_lock(&iio_sysfs_trig_list_mut);
 	list_for_each_entry(t, &iio_sysfs_trig_list, l)
 		if (id == t->id) {
 			foundit = true;
 			break;
 		}
 	if (!foundit) {
-		mutex_unlock(&iio_syfs_trig_list_mut);
+		mutex_unlock(&iio_sysfs_trig_list_mut);
 		return -EINVAL;
 	}
 
@@ -202,7 +202,7 @@
 	list_del(&t->l);
 	kfree(t);
 	module_put(THIS_MODULE);
-	mutex_unlock(&iio_syfs_trig_list_mut);
+	mutex_unlock(&iio_sysfs_trig_list_mut);
 	return 0;
 }
 
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 922a7fe..24c41ba 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -422,14 +422,15 @@
  * Gameport port operations
  */
 
-static ssize_t gameport_show_description(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t gameport_description_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct gameport *gameport = to_gameport_port(dev);
 
 	return sprintf(buf, "%s\n", gameport->name);
 }
+static DEVICE_ATTR(description, S_IRUGO, gameport_description_show, NULL);
 
-static ssize_t gameport_rebind_driver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t drvctl_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct gameport *gameport = to_gameport_port(dev);
 	struct device_driver *drv;
@@ -457,12 +458,14 @@
 
 	return error ? error : count;
 }
+static DEVICE_ATTR_WO(drvctl);
 
-static struct device_attribute gameport_device_attrs[] = {
-	__ATTR(description, S_IRUGO, gameport_show_description, NULL),
-	__ATTR(drvctl, S_IWUSR, NULL, gameport_rebind_driver),
-	__ATTR_NULL
+static struct attribute *gameport_device_attrs[] = {
+	&dev_attr_description.attr,
+	&dev_attr_drvctl.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(gameport_device);
 
 static void gameport_release_port(struct device *dev)
 {
@@ -750,7 +753,7 @@
 
 static struct bus_type gameport_bus = {
 	.name		= "gameport",
-	.dev_attrs	= gameport_device_attrs,
+	.dev_groups	= gameport_device_groups,
 	.drv_groups	= gameport_driver_groups,
 	.match		= gameport_bus_match,
 	.probe		= gameport_driver_probe,
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 33b3e88..1de1e5f 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,7 @@
 config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EXPERT || !X86
 	default y
-	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+	depends on !PARISC && (!ARM || FOOTBRIDGE_HOST) && \
 		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390 && \
 		   !ARC
 	help
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 2b56855..98707fb 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -365,7 +365,7 @@
 	return sprintf(buf, "%s\n", serio->name);
 }
 
-static ssize_t serio_show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
 
@@ -373,54 +373,31 @@
 			serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
 }
 
-static ssize_t serio_show_id_type(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
 	return sprintf(buf, "%02x\n", serio->id.type);
 }
 
-static ssize_t serio_show_id_proto(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t proto_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
 	return sprintf(buf, "%02x\n", serio->id.proto);
 }
 
-static ssize_t serio_show_id_id(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
 	return sprintf(buf, "%02x\n", serio->id.id);
 }
 
-static ssize_t serio_show_id_extra(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t extra_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
 	return sprintf(buf, "%02x\n", serio->id.extra);
 }
 
-static DEVICE_ATTR(type, S_IRUGO, serio_show_id_type, NULL);
-static DEVICE_ATTR(proto, S_IRUGO, serio_show_id_proto, NULL);
-static DEVICE_ATTR(id, S_IRUGO, serio_show_id_id, NULL);
-static DEVICE_ATTR(extra, S_IRUGO, serio_show_id_extra, NULL);
-
-static struct attribute *serio_device_id_attrs[] = {
-	&dev_attr_type.attr,
-	&dev_attr_proto.attr,
-	&dev_attr_id.attr,
-	&dev_attr_extra.attr,
-	NULL
-};
-
-static struct attribute_group serio_id_attr_group = {
-	.name	= "id",
-	.attrs	= serio_device_id_attrs,
-};
-
-static const struct attribute_group *serio_device_attr_groups[] = {
-	&serio_id_attr_group,
-	NULL
-};
-
-static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t drvctl_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct serio *serio = to_serio_port(dev);
 	struct device_driver *drv;
@@ -474,14 +451,36 @@
 	return retval;
 }
 
-static struct device_attribute serio_device_attrs[] = {
-	__ATTR(description, S_IRUGO, serio_show_description, NULL),
-	__ATTR(modalias, S_IRUGO, serio_show_modalias, NULL),
-	__ATTR(drvctl, S_IWUSR, NULL, serio_rebind_driver),
-	__ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode),
-	__ATTR_NULL
+static DEVICE_ATTR_RO(type);
+static DEVICE_ATTR_RO(proto);
+static DEVICE_ATTR_RO(id);
+static DEVICE_ATTR_RO(extra);
+static DEVICE_ATTR_RO(modalias);
+static DEVICE_ATTR_WO(drvctl);
+static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL);
+static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode);
+
+static struct attribute *serio_device_id_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_proto.attr,
+	&dev_attr_id.attr,
+	&dev_attr_extra.attr,
+	&dev_attr_modalias.attr,
+	&dev_attr_description.attr,
+	&dev_attr_drvctl.attr,
+	&dev_attr_bind_mode.attr,
+	NULL
 };
 
+static struct attribute_group serio_id_attr_group = {
+	.name	= "id",
+	.attrs	= serio_device_id_attrs,
+};
+
+static const struct attribute_group *serio_device_attr_groups[] = {
+	&serio_id_attr_group,
+	NULL
+};
 
 static void serio_release_port(struct device *dev)
 {
@@ -996,7 +995,6 @@
 
 static struct bus_type serio_bus = {
 	.name		= "serio",
-	.dev_attrs	= serio_device_attrs,
 	.drv_groups	= serio_driver_groups,
 	.match		= serio_bus_match,
 	.uevent		= serio_uevent,
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index e1c5300..24e625c 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -52,6 +52,7 @@
 	u32			config_inp[4];
 	u32			bit_xp, bit_xn, bit_yp, bit_yn;
 	u32			inp_xp, inp_xn, inp_yp, inp_yn;
+	u32			step_mask;
 };
 
 static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
@@ -196,7 +197,8 @@
 
 	/* The steps1 … end and bit 0 for TS_Charge */
 	stepenable = (1 << (end_step + 2)) - 1;
-	am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);
+	ts_dev->step_mask = stepenable;
+	am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask);
 }
 
 static void titsc_read_coordinates(struct titsc *ts_dev,
@@ -260,6 +262,10 @@
 	unsigned int fsm;
 
 	status = titsc_readl(ts_dev, REG_IRQSTATUS);
+	/*
+	 * ADC and touchscreen share the IRQ line.
+	 * FIFO1 interrupts are used by ADC. Handle FIFO0 IRQs here only
+	 */
 	if (status & IRQENB_FIFO0THRES) {
 
 		titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
@@ -316,7 +322,7 @@
 
 	if (irqclr) {
 		titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
-		am335x_tsc_se_update(ts_dev->mfd_tscadc);
+		am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask);
 		return IRQ_HANDLED;
 	}
 	return IRQ_NONE;
@@ -389,7 +395,7 @@
 	}
 
 	err = request_irq(ts_dev->irq, titsc_irq,
-			  0, pdev->dev.driver->name, ts_dev);
+			  IRQF_SHARED, pdev->dev.driver->name, ts_dev);
 	if (err) {
 		dev_err(&pdev->dev, "failed to allocate irq.\n");
 		goto err_free_mem;
diff --git a/drivers/ipack/ipack.c b/drivers/ipack/ipack.c
index 6e066c5..d0016ba 100644
--- a/drivers/ipack/ipack.c
+++ b/drivers/ipack/ipack.c
@@ -180,20 +180,28 @@
 
 ipack_device_attr(id_format, "0x%hhu\n");
 
-static struct device_attribute ipack_dev_attrs[] = {
-	__ATTR_RO(id),
-	__ATTR_RO(id_device),
-	__ATTR_RO(id_format),
-	__ATTR_RO(id_vendor),
-	__ATTR_RO(modalias),
+static DEVICE_ATTR_RO(id);
+static DEVICE_ATTR_RO(id_device);
+static DEVICE_ATTR_RO(id_format);
+static DEVICE_ATTR_RO(id_vendor);
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *ipack_attrs[] = {
+	&dev_attr_id.attr,
+	&dev_attr_id_device.attr,
+	&dev_attr_id_format.attr,
+	&dev_attr_id_vendor.attr,
+	&dev_attr_modalias.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(ipack);
 
 static struct bus_type ipack_bus_type = {
 	.name      = "ipack",
 	.probe     = ipack_bus_probe,
 	.match     = ipack_bus_match,
 	.remove    = ipack_bus_remove,
-	.dev_attrs = ipack_dev_attrs,
+	.dev_groups = ipack_groups,
 	.uevent	   = ipack_uevent,
 };
 
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index bb328a3..433cc85 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -21,7 +21,10 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/of_pci.h>
 #include <linux/irqdomain.h>
+#include <linux/slab.h>
+#include <linux/msi.h>
 #include <asm/mach/arch.h>
 #include <asm/exception.h>
 #include <asm/smp_plat.h>
@@ -51,12 +54,22 @@
 #define IPI_DOORBELL_START                      (0)
 #define IPI_DOORBELL_END                        (8)
 #define IPI_DOORBELL_MASK                       0xFF
+#define PCI_MSI_DOORBELL_START                  (16)
+#define PCI_MSI_DOORBELL_NR                     (16)
+#define PCI_MSI_DOORBELL_END                    (32)
+#define PCI_MSI_DOORBELL_MASK                   0xFFFF0000
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
 
 static void __iomem *per_cpu_int_base;
 static void __iomem *main_int_base;
 static struct irq_domain *armada_370_xp_mpic_domain;
+#ifdef CONFIG_PCI_MSI
+static struct irq_domain *armada_370_xp_msi_domain;
+static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR);
+static DEFINE_MUTEX(msi_used_lock);
+static phys_addr_t msi_doorbell_addr;
+#endif
 
 /*
  * In SMP mode:
@@ -87,6 +100,144 @@
 				ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
 }
 
+#ifdef CONFIG_PCI_MSI
+
+static int armada_370_xp_alloc_msi(void)
+{
+	int hwirq;
+
+	mutex_lock(&msi_used_lock);
+	hwirq = find_first_zero_bit(&msi_used, PCI_MSI_DOORBELL_NR);
+	if (hwirq >= PCI_MSI_DOORBELL_NR)
+		hwirq = -ENOSPC;
+	else
+		set_bit(hwirq, msi_used);
+	mutex_unlock(&msi_used_lock);
+
+	return hwirq;
+}
+
+static void armada_370_xp_free_msi(int hwirq)
+{
+	mutex_lock(&msi_used_lock);
+	if (!test_bit(hwirq, msi_used))
+		pr_err("trying to free unused MSI#%d\n", hwirq);
+	else
+		clear_bit(hwirq, msi_used);
+	mutex_unlock(&msi_used_lock);
+}
+
+static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
+				       struct pci_dev *pdev,
+				       struct msi_desc *desc)
+{
+	struct msi_msg msg;
+	irq_hw_number_t hwirq;
+	int virq;
+
+	hwirq = armada_370_xp_alloc_msi();
+	if (hwirq < 0)
+		return hwirq;
+
+	virq = irq_create_mapping(armada_370_xp_msi_domain, hwirq);
+	if (!virq) {
+		armada_370_xp_free_msi(hwirq);
+		return -EINVAL;
+	}
+
+	irq_set_msi_desc(virq, desc);
+
+	msg.address_lo = msi_doorbell_addr;
+	msg.address_hi = 0;
+	msg.data = 0xf00 | (hwirq + 16);
+
+	write_msi_msg(virq, &msg);
+	return 0;
+}
+
+static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
+					   unsigned int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	irq_dispose_mapping(irq);
+	armada_370_xp_free_msi(d->hwirq);
+}
+
+static struct irq_chip armada_370_xp_msi_irq_chip = {
+	.name = "armada_370_xp_msi_irq",
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
+};
+
+static int armada_370_xp_msi_map(struct irq_domain *domain, unsigned int virq,
+				 irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &armada_370_xp_msi_irq_chip,
+				 handle_simple_irq);
+	set_irq_flags(virq, IRQF_VALID);
+
+	return 0;
+}
+
+static const struct irq_domain_ops armada_370_xp_msi_irq_ops = {
+	.map = armada_370_xp_msi_map,
+};
+
+static int armada_370_xp_msi_init(struct device_node *node,
+				  phys_addr_t main_int_phys_base)
+{
+	struct msi_chip *msi_chip;
+	u32 reg;
+	int ret;
+
+	msi_doorbell_addr = main_int_phys_base +
+		ARMADA_370_XP_SW_TRIG_INT_OFFS;
+
+	msi_chip = kzalloc(sizeof(*msi_chip), GFP_KERNEL);
+	if (!msi_chip)
+		return -ENOMEM;
+
+	msi_chip->setup_irq = armada_370_xp_setup_msi_irq;
+	msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq;
+	msi_chip->of_node = node;
+
+	armada_370_xp_msi_domain =
+		irq_domain_add_linear(NULL, PCI_MSI_DOORBELL_NR,
+				      &armada_370_xp_msi_irq_ops,
+				      NULL);
+	if (!armada_370_xp_msi_domain) {
+		kfree(msi_chip);
+		return -ENOMEM;
+	}
+
+	ret = of_pci_msi_chip_add(msi_chip);
+	if (ret < 0) {
+		irq_domain_remove(armada_370_xp_msi_domain);
+		kfree(msi_chip);
+		return ret;
+	}
+
+	reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS)
+		| PCI_MSI_DOORBELL_MASK;
+
+	writel(reg, per_cpu_int_base +
+	       ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
+
+	/* Unmask IPI interrupt */
+	writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+
+	return 0;
+}
+#else
+static inline int armada_370_xp_msi_init(struct device_node *node,
+					 phys_addr_t main_int_phys_base)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_SMP
 static int armada_xp_set_affinity(struct irq_data *d,
 				  const struct cpumask *mask_val, bool force)
@@ -214,12 +365,39 @@
 		if (irqnr > 1022)
 			break;
 
-		if (irqnr > 0) {
+		if (irqnr > 1) {
 			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
 					irqnr);
 			handle_IRQ(irqnr, regs);
 			continue;
 		}
+
+#ifdef CONFIG_PCI_MSI
+		/* MSI handling */
+		if (irqnr == 1) {
+			u32 msimask, msinr;
+
+			msimask = readl_relaxed(per_cpu_int_base +
+						ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
+				& PCI_MSI_DOORBELL_MASK;
+
+			writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base +
+			       ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+			for (msinr = PCI_MSI_DOORBELL_START;
+			     msinr < PCI_MSI_DOORBELL_END; msinr++) {
+				int irq;
+
+				if (!(msimask & BIT(msinr)))
+					continue;
+
+				irq = irq_find_mapping(armada_370_xp_msi_domain,
+						       msinr - 16);
+				handle_IRQ(irq, regs);
+			}
+		}
+#endif
+
 #ifdef CONFIG_SMP
 		/* IPI Handling */
 		if (irqnr == 0) {
@@ -248,12 +426,25 @@
 static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 					     struct device_node *parent)
 {
+	struct resource main_int_res, per_cpu_int_res;
 	u32 control;
 
-	main_int_base = of_iomap(node, 0);
-	per_cpu_int_base = of_iomap(node, 1);
+	BUG_ON(of_address_to_resource(node, 0, &main_int_res));
+	BUG_ON(of_address_to_resource(node, 1, &per_cpu_int_res));
 
+	BUG_ON(!request_mem_region(main_int_res.start,
+				   resource_size(&main_int_res),
+				   node->full_name));
+	BUG_ON(!request_mem_region(per_cpu_int_res.start,
+				   resource_size(&per_cpu_int_res),
+				   node->full_name));
+
+	main_int_base = ioremap(main_int_res.start,
+				resource_size(&main_int_res));
 	BUG_ON(!main_int_base);
+
+	per_cpu_int_base = ioremap(per_cpu_int_res.start,
+				   resource_size(&per_cpu_int_res));
 	BUG_ON(!per_cpu_int_base);
 
 	control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
@@ -262,8 +453,7 @@
 		irq_domain_add_linear(node, (control >> 2) & 0x3ff,
 				&armada_370_xp_mpic_irq_ops, NULL);
 
-	if (!armada_370_xp_mpic_domain)
-		panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
+	BUG_ON(!armada_370_xp_mpic_domain);
 
 	irq_set_default_host(armada_370_xp_mpic_domain);
 
@@ -280,6 +470,8 @@
 
 #endif
 
+	armada_370_xp_msi_init(node, main_int_res.start);
+
 	set_handle_irq(armada_370_xp_handle_irq);
 
 	return 0;
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 16c78f1..1693b8e 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -49,9 +49,11 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/irqdomain.h>
-#include <linux/irqchip/bcm2835.h>
 
 #include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
 
 /* Put the bank and irq (32 bits) into the hwirq */
 #define MAKE_HWIRQ(b, n)	((b << 5) | (n))
@@ -93,6 +95,8 @@
 };
 
 static struct armctrl_ic intc __read_mostly;
+static asmlinkage void __exception_irq_entry bcm2835_handle_irq(
+	struct pt_regs *regs);
 
 static void armctrl_mask_irq(struct irq_data *d)
 {
@@ -164,19 +168,11 @@
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
+
+	set_handle_irq(bcm2835_handle_irq);
 	return 0;
 }
 
-static struct of_device_id irq_of_match[] __initconst = {
-	{ .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init },
-	{ }
-};
-
-void __init bcm2835_init_irq(void)
-{
-	of_irq_init(irq_of_match);
-}
-
 /*
  * Handle each interrupt across the entire interrupt controller.  This reads the
  * status register before handling each interrupt, which is necessary given that
@@ -200,7 +196,7 @@
 	handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
 }
 
-asmlinkage void __exception_irq_entry bcm2835_handle_irq(
+static asmlinkage void __exception_irq_entry bcm2835_handle_irq(
 	struct pt_regs *regs)
 {
 	u32 stat, irq;
@@ -222,3 +218,5 @@
 		}
 	}
 }
+
+IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic", armctrl_of_init);
diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c
index 2bbb004..8e21ae0 100644
--- a/drivers/irqchip/irq-vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -469,6 +469,8 @@
 int __init vic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *regs;
+	u32 interrupt_mask = ~0;
+	u32 wakeup_mask = ~0;
 
 	if (WARN(parent, "non-root VICs are not supported"))
 		return -EINVAL;
@@ -477,10 +479,13 @@
 	if (WARN_ON(!regs))
 		return -EIO;
 
+	of_property_read_u32(node, "valid-mask", &interrupt_mask);
+	of_property_read_u32(node, "valid-wakeup-mask", &wakeup_mask);
+
 	/*
 	 * Passing 0 as first IRQ makes the simple domain allocate descriptors
 	 */
-	__vic_init(regs, 0, ~0, ~0, node);
+	__vic_init(regs, 0, interrupt_mask, wakeup_mask, node);
 
 	return 0;
 }
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index a7fd821..12dc29b 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1654,9 +1654,9 @@
 	bitmap->mddev = mddev;
 
 	if (mddev->kobj.sd)
-		bm = sysfs_get_dirent(mddev->kobj.sd, NULL, "bitmap");
+		bm = sysfs_get_dirent(mddev->kobj.sd, "bitmap");
 	if (bm) {
-		bitmap->sysfs_can_clear = sysfs_get_dirent(bm, NULL, "can_clear");
+		bitmap->sysfs_can_clear = sysfs_get_dirent(bm, "can_clear");
 		sysfs_put(bm);
 	} else
 		bitmap->sysfs_can_clear = NULL;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 561a65f..2445fec 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3555,7 +3555,7 @@
 			printk(KERN_WARNING
 			       "md: cannot register extra attributes for %s\n",
 			       mdname(mddev));
-		mddev->sysfs_action = sysfs_get_dirent(mddev->kobj.sd, NULL, "sync_action");
+		mddev->sysfs_action = sysfs_get_dirent(mddev->kobj.sd, "sync_action");
 	}		
 	if (mddev->pers->sync_request != NULL &&
 	    pers->sync_request == NULL) {
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 608050c..b0051f2 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -501,7 +501,7 @@
 static inline struct sysfs_dirent *sysfs_get_dirent_safe(struct sysfs_dirent *sd, char *name)
 {
 	if (sd)
-		return sysfs_get_dirent(sd, NULL, name);
+		return sysfs_get_dirent(sd, name);
 	return sd;
 }
 static inline void sysfs_notify_dirent_safe(struct sysfs_dirent *sd)
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index c7caf94..eb70dda 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -112,7 +112,7 @@
 config VIDEO_S3C_CAMIF
 	tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
-	depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
+	depends on (ARCH_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
 	select VIDEOBUF2_DMA_CONTIG
 	---help---
 	  This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index 53ad0f0..d2d3b4b 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -29,7 +29,7 @@
 config VIDEO_S5P_MIPI_CSIS
 	tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
 	depends on REGULATOR
-	select S5P_SETUP_MIPIPHY
+	select GENERIC_PHY
 	help
 	  This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
 	  receiver (MIPI-CSIS) devices.
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 0914230..9fc2af6 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -20,6 +20,7 @@
 #include <linux/memory.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/mipi-csis.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -180,6 +181,7 @@
  * @sd: v4l2_subdev associated with CSIS device instance
  * @index: the hardware instance index
  * @pdev: CSIS platform device
+ * @phy: pointer to the CSIS generic PHY
  * @regs: mmaped I/O registers memory
  * @supplies: CSIS regulator supplies
  * @clock: CSIS clocks
@@ -203,6 +205,7 @@
 	struct v4l2_subdev sd;
 	u8 index;
 	struct platform_device *pdev;
+	struct phy *phy;
 	void __iomem *regs;
 	struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES];
 	struct clk *clock[NUM_CSIS_CLOCKS];
@@ -779,8 +782,8 @@
 					"samsung,csis-wclk");
 
 	state->num_lanes = endpoint.bus.mipi_csi2.num_data_lanes;
-
 	of_node_put(node);
+
 	return 0;
 }
 #else
@@ -829,6 +832,10 @@
 		return -EINVAL;
 	}
 
+	state->phy = devm_phy_get(dev, "csis");
+	if (IS_ERR(state->phy))
+		return PTR_ERR(state->phy);
+
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	state->regs = devm_ioremap_resource(dev, mem_res);
 	if (IS_ERR(state->regs))
@@ -922,7 +929,7 @@
 	mutex_lock(&state->lock);
 	if (state->flags & ST_POWERED) {
 		s5pcsis_stop_stream(state);
-		ret = s5p_csis_phy_enable(state->index, false);
+		ret = phy_power_off(state->phy);
 		if (ret)
 			goto unlock;
 		ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
@@ -958,7 +965,7 @@
 					    state->supplies);
 		if (ret)
 			goto unlock;
-		ret = s5p_csis_phy_enable(state->index, true);
+		ret = phy_power_on(state->phy);
 		if (!ret) {
 			state->flags |= ST_POWERED;
 		} else {
diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index ffcb10a..bbf4aea 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -153,24 +153,24 @@
 	struct memstick_dev *card = container_of(dev, struct memstick_dev,    \
 						 dev);                        \
 	return sprintf(buf, format, card->id.name);                           \
-}
+}                                                                             \
+static DEVICE_ATTR_RO(name);
 
 MEMSTICK_ATTR(type, "%02X");
 MEMSTICK_ATTR(category, "%02X");
 MEMSTICK_ATTR(class, "%02X");
 
-#define MEMSTICK_ATTR_RO(name) __ATTR(name, S_IRUGO, name##_show, NULL)
-
-static struct device_attribute memstick_dev_attrs[] = {
-	MEMSTICK_ATTR_RO(type),
-	MEMSTICK_ATTR_RO(category),
-	MEMSTICK_ATTR_RO(class),
-	__ATTR_NULL
+static struct attribute *memstick_dev_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_category.attr,
+	&dev_attr_class.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(memstick_dev);
 
 static struct bus_type memstick_bus_type = {
 	.name           = "memstick",
-	.dev_attrs      = memstick_dev_attrs,
+	.dev_groups	= memstick_dev_groups,
 	.match          = memstick_bus_match,
 	.uevent         = memstick_uevent,
 	.probe          = memstick_device_probe,
diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h
index cbe384f..91614f1 100644
--- a/drivers/message/i2o/core.h
+++ b/drivers/message/i2o/core.h
@@ -33,7 +33,7 @@
 extern void __exit i2o_pci_exit(void);
 
 /* device */
-extern struct device_attribute i2o_device_attrs[];
+extern const struct attribute_group *i2o_device_groups[];
 
 extern void i2o_device_remove(struct i2o_device *);
 extern int i2o_device_parse_lct(struct i2o_controller *);
diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 4547db9..98348f4 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -138,45 +138,55 @@
 }
 
 /**
- *	i2o_device_show_class_id - Displays class id of I2O device
+ *	class_id_show - Displays class id of I2O device
  *	@dev: device of which the class id should be displayed
  *	@attr: pointer to device attribute
  *	@buf: buffer into which the class id should be printed
  *
  *	Returns the number of bytes which are printed into the buffer.
  */
-static ssize_t i2o_device_show_class_id(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
+static ssize_t class_id_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
 {
 	struct i2o_device *i2o_dev = to_i2o_device(dev);
 
 	sprintf(buf, "0x%03x\n", i2o_dev->lct_data.class_id);
 	return strlen(buf) + 1;
 }
+static DEVICE_ATTR_RO(class_id);
 
 /**
- *	i2o_device_show_tid - Displays TID of I2O device
+ *	tid_show - Displays TID of I2O device
  *	@dev: device of which the TID should be displayed
  *	@attr: pointer to device attribute
  *	@buf: buffer into which the TID should be printed
  *
  *	Returns the number of bytes which are printed into the buffer.
  */
-static ssize_t i2o_device_show_tid(struct device *dev,
-				   struct device_attribute *attr, char *buf)
+static ssize_t tid_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
 {
 	struct i2o_device *i2o_dev = to_i2o_device(dev);
 
 	sprintf(buf, "0x%03x\n", i2o_dev->lct_data.tid);
 	return strlen(buf) + 1;
 }
+static DEVICE_ATTR_RO(tid);
 
 /* I2O device attributes */
-struct device_attribute i2o_device_attrs[] = {
-	__ATTR(class_id, S_IRUGO, i2o_device_show_class_id, NULL),
-	__ATTR(tid, S_IRUGO, i2o_device_show_tid, NULL),
-	__ATTR_NULL
+static struct attribute *i2o_device_attrs[] = {
+	&dev_attr_class_id.attr,
+	&dev_attr_tid.attr,
+	NULL,
+};
+
+static const struct attribute_group i2o_device_group = {
+	.attrs = i2o_device_attrs,
+};
+
+const struct attribute_group *i2o_device_groups[] = {
+	&i2o_device_group,
+	NULL,
 };
 
 /**
diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c
index 813eaa3..b6b92d7 100644
--- a/drivers/message/i2o/driver.c
+++ b/drivers/message/i2o/driver.c
@@ -62,7 +62,7 @@
 struct bus_type i2o_bus_type = {
 	.name = "i2o",
 	.match = i2o_bus_match,
-	.dev_attrs = i2o_device_attrs
+	.dev_groups = i2o_device_groups,
 };
 
 /**
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 53f371d..b9ce60c 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -480,7 +480,6 @@
 	CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
-	CLK_MGT_ENTRY(BML8580CLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index 4f6f0fa..7cc32a8 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -32,7 +32,6 @@
 #define PRCM_PER7CLK_MGT	(0x040)
 #define PRCM_LCDCLK_MGT		(0x044)
 #define PRCM_BMLCLK_MGT		(0x04C)
-#define PRCM_BML8580CLK_MGT	(0x108)
 #define PRCM_HSITXCLK_MGT	(0x050)
 #define PRCM_HSIRXCLK_MGT	(0x054)
 #define PRCM_HDMICLK_MGT	(0x058)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 8dacd4c..e760715 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -537,4 +537,5 @@
 source "drivers/misc/altera-stapl/Kconfig"
 source "drivers/misc/mei/Kconfig"
 source "drivers/misc/vmw_vmci/Kconfig"
+source "drivers/misc/mic/Kconfig"
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c235d5b..0b7ea3e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -53,3 +53,4 @@
 obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
 obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
 obj-$(CONFIG_SRAM)		+= sram.o
+obj-y				+= mic/
diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c
index 1256a4b..b7ebf80 100644
--- a/drivers/misc/arm-charlcd.c
+++ b/drivers/misc/arm-charlcd.c
@@ -297,7 +297,7 @@
 	lcd->irq = platform_get_irq(pdev, 0);
 	/* If no IRQ is supplied, we'll survive without it */
 	if (lcd->irq >= 0) {
-		if (request_irq(lcd->irq, charlcd_interrupt, IRQF_DISABLED,
+		if (request_irq(lcd->irq, charlcd_interrupt, 0,
 				DRIVERNAME, lcd)) {
 			ret = -EIO;
 			goto out_no_irq;
diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
index 494d050..a6dc56e 100644
--- a/drivers/misc/atmel_pwm.c
+++ b/drivers/misc/atmel_pwm.c
@@ -90,8 +90,10 @@
 	unsigned long	flags;
 	int		status = 0;
 
-	/* insist on PWM init, with this signal pinned out */
-	if (!pwm || !(pwm->mask & 1 << index))
+	if (!pwm)
+		return -EPROBE_DEFER;
+
+	if (!(pwm->mask & 1 << index))
 		return -ENODEV;
 
 	if (index < 0 || index >= PWM_NCHAN || !ch)
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index 057580e..48ea33d 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/of.h>
 
 #define BH1780_REG_CONTROL	0x80
 #define BH1780_REG_PARTID	0x8A
@@ -244,6 +245,15 @@
 	{ },
 };
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_bh1780_match[] = {
+	{ .compatible = "rohm,bh1780gli", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_bh1780_match);
+#endif
+
 static struct i2c_driver bh1780_driver = {
 	.probe		= bh1780_probe,
 	.remove		= bh1780_remove,
@@ -251,6 +261,7 @@
 	.driver = {
 		.name = "bh1780",
 		.pm	= &bh1780_pm,
+		.of_match_table = of_match_ptr(of_bh1780_match),
 	},
 };
 
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 849e2fe..2704d88 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -374,7 +374,7 @@
 }
 EXPORT_SYMBOL_GPL(bmp085_detect);
 
-static void __init bmp085_get_of_properties(struct bmp085_data *data)
+static void bmp085_get_of_properties(struct bmp085_data *data)
 {
 #ifdef CONFIG_OF
 	struct device_node *np = data->dev->of_node;
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
index 2e50f81..fb397e7 100644
--- a/drivers/misc/cb710/core.c
+++ b/drivers/misc/cb710/core.c
@@ -176,7 +176,7 @@
 {
 	struct cb710_chip *chip = pci_get_drvdata(pdev);
 
-	free_irq(pdev->irq, chip);
+	devm_free_irq(&pdev->dev, pdev->irq, chip);
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	if (state.event & PM_EVENT_SLEEP)
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 04f2e1f..9536852f 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -96,4 +96,17 @@
 
 	  If unsure, say N.
 
+config EEPROM_SUNXI_SID
+	tristate "Allwinner sunxi security ID support"
+	depends on ARCH_SUNXI && SYSFS
+	help
+	  This is a driver for the 'security ID' available on various Allwinner
+	  devices.
+
+	  Due to the potential risks involved with changing e-fuses,
+	  this driver is read-only.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sunxi_sid.
+
 endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index fc1e81d..9507aec 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -4,4 +4,5 @@
 obj-$(CONFIG_EEPROM_MAX6875)	+= max6875.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
 obj-$(CONFIG_EEPROM_93XX46)	+= eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_SUNXI_SID)	+= sunxi_sid.o
 obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 5d4fd69..94b8a33 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -428,6 +428,9 @@
 {
 	struct at24_data *at24;
 
+	if (unlikely(off >= attr->size))
+		return -EFBIG;
+
 	at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
 	return at24_write(at24, buf, off, count);
 }
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 840b359..4f3bca1 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -462,10 +462,17 @@
 
 /*-------------------------------------------------------------------------*/
 
+static const struct of_device_id at25_of_match[] = {
+	{ .compatible = "atmel,at25", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, at25_of_match);
+
 static struct spi_driver at25_driver = {
 	.driver = {
 		.name		= "at25",
 		.owner		= THIS_MODULE,
+		.of_match_table = at25_of_match,
 	},
 	.probe		= at25_probe,
 	.remove		= at25_remove,
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 94cfc12..3a015ab 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -202,7 +202,7 @@
 	edev = dev_get_drvdata(dev);
 
 	if (unlikely(off >= edev->bin.size))
-		return 0;
+		return -EFBIG;
 	if ((off + count) > edev->bin.size)
 		count = edev->bin.size - off;
 	if (unlikely(!count))
diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c
new file mode 100644
index 0000000..9c34e57
--- /dev/null
+++ b/drivers/misc/eeprom/sunxi_sid.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://www.linux-sunxi.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver exposes the Allwinner security ID, efuses exported in byte-
+ * sized chunks.
+ */
+
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define DRV_NAME "sunxi-sid"
+
+struct sunxi_sid_data {
+	void __iomem *reg_base;
+	unsigned int keysize;
+};
+
+/* We read the entire key, due to a 32 bit read alignment requirement. Since we
+ * want to return the requested byte, this results in somewhat slower code and
+ * uses 4 times more reads as needed but keeps code simpler. Since the SID is
+ * only very rarely probed, this is not really an issue.
+ */
+static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data,
+			      const unsigned int offset)
+{
+	u32 sid_key;
+
+	if (offset >= sid_data->keysize)
+		return 0;
+
+	sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4));
+	sid_key >>= (offset % 4) * 8;
+
+	return sid_key; /* Only return the last byte */
+}
+
+static ssize_t sid_read(struct file *fd, struct kobject *kobj,
+			struct bin_attribute *attr, char *buf,
+			loff_t pos, size_t size)
+{
+	struct platform_device *pdev;
+	struct sunxi_sid_data *sid_data;
+	int i;
+
+	pdev = to_platform_device(kobj_to_dev(kobj));
+	sid_data = platform_get_drvdata(pdev);
+
+	if (pos < 0 || pos >= sid_data->keysize)
+		return 0;
+	if (size > sid_data->keysize - pos)
+		size = sid_data->keysize - pos;
+
+	for (i = 0; i < size; i++)
+		buf[i] = sunxi_sid_read_byte(sid_data, pos + i);
+
+	return i;
+}
+
+static struct bin_attribute sid_bin_attr = {
+	.attr = { .name = "eeprom", .mode = S_IRUGO, },
+	.read = sid_read,
+};
+
+static int sunxi_sid_remove(struct platform_device *pdev)
+{
+	device_remove_bin_file(&pdev->dev, &sid_bin_attr);
+	dev_dbg(&pdev->dev, "driver unloaded\n");
+
+	return 0;
+}
+
+static const struct of_device_id sunxi_sid_of_match[] = {
+	{ .compatible = "allwinner,sun4i-sid", .data = (void *)16},
+	{ .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
+
+static int sunxi_sid_probe(struct platform_device *pdev)
+{
+	struct sunxi_sid_data *sid_data;
+	struct resource *res;
+	const struct of_device_id *of_dev_id;
+	u8 *entropy;
+	unsigned int i;
+
+	sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data),
+				GFP_KERNEL);
+	if (!sid_data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(sid_data->reg_base))
+		return PTR_ERR(sid_data->reg_base);
+
+	of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev);
+	if (!of_dev_id)
+		return -ENODEV;
+	sid_data->keysize = (int)of_dev_id->data;
+
+	platform_set_drvdata(pdev, sid_data);
+
+	sid_bin_attr.size = sid_data->keysize;
+	if (device_create_bin_file(&pdev->dev, &sid_bin_attr))
+		return -ENODEV;
+
+	entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL);
+	for (i = 0; i < sid_data->keysize; i++)
+		entropy[i] = sunxi_sid_read_byte(sid_data, i);
+	add_device_randomness(entropy, sid_data->keysize);
+	kfree(entropy);
+
+	dev_dbg(&pdev->dev, "loaded\n");
+
+	return 0;
+}
+
+static struct platform_driver sunxi_sid_driver = {
+	.probe = sunxi_sid_probe,
+	.remove = sunxi_sid_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = sunxi_sid_of_match,
+	},
+};
+module_platform_driver(sunxi_sid_driver);
+
+MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>");
+MODULE_DESCRIPTION("Allwinner sunxi security id driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 0346d87..6b3bf9a 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -153,7 +153,6 @@
 error_heartbeat:
 	ibmasm_event_buffer_exit(sp);
 error_eventbuffer:
-	pci_set_drvdata(pdev, NULL);
 	kfree(sp);
 error_kmalloc:
         pci_release_regions(pdev);
@@ -165,7 +164,7 @@
 
 static void ibmasm_remove_one(struct pci_dev *pdev)
 {
-	struct service_processor *sp = (struct service_processor *)pci_get_drvdata(pdev);
+	struct service_processor *sp = pci_get_drvdata(pdev);
 
 	dbg("Unregistering UART\n");
 	ibmasm_unregister_uart(sp);
@@ -182,7 +181,6 @@
 	ibmasm_free_remote_input_dev(sp);
 	iounmap(sp->base_address);
 	ibmasm_event_buffer_exit(sp);
-	pci_set_drvdata(pdev, NULL);
 	kfree(sp);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index 2fc0586..a2edb2e 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -44,13 +44,25 @@
 #include <scsi/scsi_cmnd.h>
 #include <linux/debugfs.h>
 #include <linux/vmalloc.h>
+#include <linux/mman.h>
 
 #ifdef CONFIG_IDE
 #include <linux/ide.h>
 #endif
 
+/*
+ * Make sure our attempts to over run the kernel stack doesn't trigger
+ * a compiler warning when CONFIG_FRAME_WARN is set. Then make sure we
+ * recurse past the end of THREAD_SIZE by default.
+ */
+#if defined(CONFIG_FRAME_WARN) && (CONFIG_FRAME_WARN > 0)
+#define REC_STACK_SIZE (CONFIG_FRAME_WARN / 2)
+#else
+#define REC_STACK_SIZE (THREAD_SIZE / 8)
+#endif
+#define REC_NUM_DEFAULT ((THREAD_SIZE / REC_STACK_SIZE) * 2)
+
 #define DEFAULT_COUNT 10
-#define REC_NUM_DEFAULT 10
 #define EXEC_SIZE 64
 
 enum cname {
@@ -86,6 +98,9 @@
 	CT_EXEC_STACK,
 	CT_EXEC_KMALLOC,
 	CT_EXEC_VMALLOC,
+	CT_EXEC_USERSPACE,
+	CT_ACCESS_USERSPACE,
+	CT_WRITE_RO,
 };
 
 static char* cp_name[] = {
@@ -119,6 +134,9 @@
 	"EXEC_STACK",
 	"EXEC_KMALLOC",
 	"EXEC_VMALLOC",
+	"EXEC_USERSPACE",
+	"ACCESS_USERSPACE",
+	"WRITE_RO",
 };
 
 static struct jprobe lkdtm;
@@ -139,9 +157,10 @@
 
 static u8 data_area[EXEC_SIZE];
 
+static const unsigned long rodata = 0xAA55AA55;
+
 module_param(recur_count, int, 0644);
-MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\
-				 "default is 10");
+MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test");
 module_param(cpoint_name, charp, 0444);
 MODULE_PARM_DESC(cpoint_name, " Crash Point, where kernel is to be crashed");
 module_param(cpoint_type, charp, 0444);
@@ -280,16 +299,16 @@
 	return -EINVAL;
 }
 
-static int recursive_loop(int a)
+static int recursive_loop(int remaining)
 {
-	char buf[1024];
+	char buf[REC_STACK_SIZE];
 
-	memset(buf,0xFF,1024);
-	recur_count--;
-	if (!recur_count)
+	/* Make sure compiler does not optimize this away. */
+	memset(buf, (remaining & 0xff) | 0x1, REC_STACK_SIZE);
+	if (!remaining)
 		return 0;
 	else
-        	return recursive_loop(a);
+		return recursive_loop(remaining - 1);
 }
 
 static void do_nothing(void)
@@ -297,6 +316,14 @@
 	return;
 }
 
+static noinline void corrupt_stack(void)
+{
+	/* Use default char array length that triggers stack protection. */
+	char data[8];
+
+	memset((void *)data, 0, 64);
+}
+
 static void execute_location(void *dst)
 {
 	void (*func)(void) = dst;
@@ -305,6 +332,15 @@
 	func();
 }
 
+static void execute_user_location(void *dst)
+{
+	void (*func)(void) = dst;
+
+	if (copy_to_user(dst, do_nothing, EXEC_SIZE))
+		return;
+	func();
+}
+
 static void lkdtm_do_action(enum ctype which)
 {
 	switch (which) {
@@ -325,15 +361,11 @@
 			;
 		break;
 	case CT_OVERFLOW:
-		(void) recursive_loop(0);
+		(void) recursive_loop(recur_count);
 		break;
-	case CT_CORRUPT_STACK: {
-		/* Make sure the compiler creates and uses an 8 char array. */
-		volatile char data[8];
-
-		memset((void *)data, 0, 64);
+	case CT_CORRUPT_STACK:
+		corrupt_stack();
 		break;
-	}
 	case CT_UNALIGNED_LOAD_STORE_WRITE: {
 		static u8 data[5] __attribute__((aligned(4))) = {1, 2,
 				3, 4, 5};
@@ -401,6 +433,49 @@
 		vfree(vmalloc_area);
 		break;
 	}
+	case CT_EXEC_USERSPACE: {
+		unsigned long user_addr;
+
+		user_addr = vm_mmap(NULL, 0, PAGE_SIZE,
+				    PROT_READ | PROT_WRITE | PROT_EXEC,
+				    MAP_ANONYMOUS | MAP_PRIVATE, 0);
+		if (user_addr >= TASK_SIZE) {
+			pr_warn("Failed to allocate user memory\n");
+			return;
+		}
+		execute_user_location((void *)user_addr);
+		vm_munmap(user_addr, PAGE_SIZE);
+		break;
+	}
+	case CT_ACCESS_USERSPACE: {
+		unsigned long user_addr, tmp;
+		unsigned long *ptr;
+
+		user_addr = vm_mmap(NULL, 0, PAGE_SIZE,
+				    PROT_READ | PROT_WRITE | PROT_EXEC,
+				    MAP_ANONYMOUS | MAP_PRIVATE, 0);
+		if (user_addr >= TASK_SIZE) {
+			pr_warn("Failed to allocate user memory\n");
+			return;
+		}
+
+		ptr = (unsigned long *)user_addr;
+		tmp = *ptr;
+		tmp += 0xc0dec0de;
+		*ptr = tmp;
+
+		vm_munmap(user_addr, PAGE_SIZE);
+
+		break;
+	}
+	case CT_WRITE_RO: {
+		unsigned long *ptr;
+
+		ptr = (unsigned long *)&rodata;
+		*ptr ^= 0xabcd1234;
+
+		break;
+	}
 	case CT_NONE:
 	default:
 		break;
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index f6ff711..d22c686 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -58,6 +58,7 @@
 	dev->iamthif_state = MEI_IAMTHIF_IDLE;
 	dev->iamthif_timer = 0;
 	dev->iamthif_stall_timer = 0;
+	dev->iamthif_open_count = 0;
 }
 
 /**
@@ -78,8 +79,10 @@
 
 	i = mei_me_cl_by_uuid(dev, &mei_amthif_guid);
 	if (i < 0) {
-		dev_info(&dev->pdev->dev, "amthif: failed to find the client\n");
-		return -ENOENT;
+		ret = i;
+		dev_info(&dev->pdev->dev,
+			"amthif: failed to find the client %d\n", ret);
+		return ret;
 	}
 
 	cl->me_client_id = dev->me_clients[i].client_id;
@@ -106,8 +109,9 @@
 	ret = mei_cl_link(cl, MEI_IAMTHIF_HOST_CLIENT_ID);
 
 	if (ret < 0) {
-		dev_err(&dev->pdev->dev, "amthif: failed link client\n");
-		return -ENOENT;
+		dev_err(&dev->pdev->dev,
+			"amthif: failed link client %d\n", ret);
+		return ret;
 	}
 
 	cl->state = MEI_FILE_CONNECTING;
@@ -313,13 +317,13 @@
 		mei_hdr.me_addr = dev->iamthif_cl.me_client_id;
 		mei_hdr.reserved = 0;
 		dev->iamthif_msg_buf_index += mei_hdr.length;
-		if (mei_write_message(dev, &mei_hdr,
-					(unsigned char *)dev->iamthif_msg_buf))
-			return -ENODEV;
+		ret = mei_write_message(dev, &mei_hdr, dev->iamthif_msg_buf);
+		if (ret)
+			return ret;
 
 		if (mei_hdr.msg_complete) {
 			if (mei_cl_flow_ctrl_reduce(&dev->iamthif_cl))
-				return -ENODEV;
+				return -EIO;
 			dev->iamthif_flow_control_pending = true;
 			dev->iamthif_state = MEI_IAMTHIF_FLOW_CONTROL;
 			dev_dbg(&dev->pdev->dev, "add amthif cb to write waiting list\n");
@@ -459,6 +463,16 @@
 	struct mei_msg_hdr mei_hdr;
 	size_t len = dev->iamthif_msg_buf_size - dev->iamthif_msg_buf_index;
 	u32 msg_slots = mei_data2slots(len);
+	int rets;
+
+	rets = mei_cl_flow_ctrl_creds(cl);
+	if (rets < 0)
+		return rets;
+
+	if (rets == 0) {
+		cl_dbg(dev, cl, "No flow control credentials: not sending.\n");
+		return 0;
+	}
 
 	mei_hdr.host_addr = cl->host_client_id;
 	mei_hdr.me_addr = cl->me_client_id;
@@ -481,16 +495,17 @@
 	dev_dbg(&dev->pdev->dev, MEI_HDR_FMT,  MEI_HDR_PRM(&mei_hdr));
 
 	*slots -=  msg_slots;
-	if (mei_write_message(dev, &mei_hdr,
-		dev->iamthif_msg_buf + dev->iamthif_msg_buf_index)) {
-			dev->iamthif_state = MEI_IAMTHIF_IDLE;
-			cl->status = -ENODEV;
-			list_del(&cb->list);
-			return -ENODEV;
+	rets = mei_write_message(dev, &mei_hdr,
+			dev->iamthif_msg_buf + dev->iamthif_msg_buf_index);
+	if (rets) {
+		dev->iamthif_state = MEI_IAMTHIF_IDLE;
+		cl->status = rets;
+		list_del(&cb->list);
+		return rets;
 	}
 
 	if (mei_cl_flow_ctrl_reduce(cl))
-		return -ENODEV;
+		return -EIO;
 
 	dev->iamthif_msg_buf_index += mei_hdr.length;
 	cl->status = 0;
@@ -720,8 +735,8 @@
 */
 int mei_amthif_release(struct mei_device *dev, struct file *file)
 {
-	if (dev->open_handle_count > 0)
-		dev->open_handle_count--;
+	if (dev->iamthif_open_count > 0)
+		dev->iamthif_open_count--;
 
 	if (dev->iamthif_file_object == file &&
 	    dev->iamthif_state != MEI_IAMTHIF_IDLE) {
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index cd2033c..4bc7d62 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -245,7 +245,7 @@
 	/* Check if we have an ME client device */
 	id = mei_me_cl_by_id(dev, cl->me_client_id);
 	if (id < 0)
-		return -ENODEV;
+		return id;
 
 	if (length > dev->me_clients[id].props.max_msg_length)
 		return -EINVAL;
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index e0684b4..87c96e4 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -187,10 +187,14 @@
  */
 int mei_cl_flush_queues(struct mei_cl *cl)
 {
+	struct mei_device *dev;
+
 	if (WARN_ON(!cl || !cl->dev))
 		return -EINVAL;
 
-	dev_dbg(&cl->dev->pdev->dev, "remove list entry belonging to cl\n");
+	dev = cl->dev;
+
+	cl_dbg(dev, cl, "remove list entry belonging to cl\n");
 	mei_io_list_flush(&cl->dev->read_list, cl);
 	mei_io_list_flush(&cl->dev->write_list, cl);
 	mei_io_list_flush(&cl->dev->write_waiting_list, cl);
@@ -271,6 +275,7 @@
 int mei_cl_link(struct mei_cl *cl, int id)
 {
 	struct mei_device *dev;
+	long open_handle_count;
 
 	if (WARN_ON(!cl || !cl->dev))
 		return -EINVAL;
@@ -284,7 +289,14 @@
 
 	if (id >= MEI_CLIENTS_MAX) {
 		dev_err(&dev->pdev->dev, "id exceded %d", MEI_CLIENTS_MAX) ;
-		return -ENOENT;
+		return -EMFILE;
+	}
+
+	open_handle_count = dev->open_handle_count + dev->iamthif_open_count;
+	if (open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) {
+		dev_err(&dev->pdev->dev, "open_handle_count exceded %d",
+			MEI_MAX_OPEN_HANDLE_COUNT);
+		return -EMFILE;
 	}
 
 	dev->open_handle_count++;
@@ -296,7 +308,7 @@
 
 	cl->state = MEI_FILE_INITIALIZING;
 
-	dev_dbg(&dev->pdev->dev, "link cl host id = %d\n", cl->host_client_id);
+	cl_dbg(dev, cl, "link cl\n");
 	return 0;
 }
 
@@ -308,7 +320,6 @@
 int mei_cl_unlink(struct mei_cl *cl)
 {
 	struct mei_device *dev;
-	struct mei_cl *pos, *next;
 
 	/* don't shout on error exit path */
 	if (!cl)
@@ -320,14 +331,21 @@
 
 	dev = cl->dev;
 
-	list_for_each_entry_safe(pos, next, &dev->file_list, link) {
-		if (cl->host_client_id == pos->host_client_id) {
-			dev_dbg(&dev->pdev->dev, "remove host client = %d, ME client = %d\n",
-				pos->host_client_id, pos->me_client_id);
-			list_del_init(&pos->link);
-			break;
-		}
-	}
+	cl_dbg(dev, cl, "unlink client");
+
+	if (dev->open_handle_count > 0)
+		dev->open_handle_count--;
+
+	/* never clear the 0 bit */
+	if (cl->host_client_id)
+		clear_bit(cl->host_client_id, dev->host_clients_map);
+
+	list_del_init(&cl->link);
+
+	cl->state = MEI_FILE_INITIALIZING;
+
+	list_del_init(&cl->link);
+
 	return 0;
 }
 
@@ -341,17 +359,6 @@
 
 	mutex_lock(&dev->device_lock);
 
-	bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
-	dev->open_handle_count = 0;
-
-	/*
-	 * Reserving the first three client IDs
-	 * 0: Reserved for MEI Bus Message communications
-	 * 1: Reserved for Watchdog
-	 * 2: Reserved for AMTHI
-	 */
-	bitmap_set(dev->host_clients_map, 0, 3);
-
 	for (i = 0; i < dev->me_clients_num; i++) {
 		client_props = &dev->me_clients[i].props;
 
@@ -390,6 +397,8 @@
 
 	dev = cl->dev;
 
+	cl_dbg(dev, cl, "disconnecting");
+
 	if (cl->state != MEI_FILE_DISCONNECTING)
 		return 0;
 
@@ -402,13 +411,13 @@
 		dev->hbuf_is_ready = false;
 		if (mei_hbm_cl_disconnect_req(dev, cl)) {
 			rets = -ENODEV;
-			dev_err(&dev->pdev->dev, "failed to disconnect.\n");
+			cl_err(dev, cl, "failed to disconnect.\n");
 			goto free;
 		}
 		mdelay(10); /* Wait for hardware disconnection ready */
 		list_add_tail(&cb->list, &dev->ctrl_rd_list.list);
 	} else {
-		dev_dbg(&dev->pdev->dev, "add disconnect cb to control write list\n");
+		cl_dbg(dev, cl, "add disconnect cb to control write list\n");
 		list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
 
 	}
@@ -421,18 +430,17 @@
 	mutex_lock(&dev->device_lock);
 	if (MEI_FILE_DISCONNECTED == cl->state) {
 		rets = 0;
-		dev_dbg(&dev->pdev->dev, "successfully disconnected from FW client.\n");
+		cl_dbg(dev, cl, "successfully disconnected from FW client.\n");
 	} else {
 		rets = -ENODEV;
 		if (MEI_FILE_DISCONNECTED != cl->state)
-			dev_dbg(&dev->pdev->dev, "wrong status client disconnect.\n");
+			cl_err(dev, cl, "wrong status client disconnect.\n");
 
 		if (err)
-			dev_dbg(&dev->pdev->dev,
-					"wait failed disconnect err=%08x\n",
+			cl_dbg(dev, cl, "wait failed disconnect err=%08x\n",
 					err);
 
-		dev_dbg(&dev->pdev->dev, "failed to disconnect from FW client.\n");
+		cl_err(dev, cl, "failed to disconnect from FW client.\n");
 	}
 
 	mei_io_list_flush(&dev->ctrl_rd_list, cl);
@@ -639,13 +647,12 @@
 		return -ENODEV;
 
 	if (cl->read_cb) {
-		dev_dbg(&dev->pdev->dev, "read is pending.\n");
+		cl_dbg(dev, cl, "read is pending.\n");
 		return -EBUSY;
 	}
 	i = mei_me_cl_by_id(dev, cl->me_client_id);
 	if (i < 0) {
-		dev_err(&dev->pdev->dev, "no such me client %d\n",
-			cl->me_client_id);
+		cl_err(dev, cl, "no such me client %d\n", cl->me_client_id);
 		return  -ENODEV;
 	}
 
@@ -664,6 +671,7 @@
 	if (dev->hbuf_is_ready) {
 		dev->hbuf_is_ready = false;
 		if (mei_hbm_cl_flow_control_req(dev, cl)) {
+			cl_err(dev, cl, "flow control send failed\n");
 			rets = -ENODEV;
 			goto err;
 		}
@@ -691,10 +699,32 @@
 int mei_cl_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
 				     s32 *slots, struct mei_cl_cb *cmpl_list)
 {
-	struct mei_device *dev = cl->dev;
+	struct mei_device *dev;
+	struct mei_msg_data *buf;
 	struct mei_msg_hdr mei_hdr;
-	size_t len = cb->request_buffer.size - cb->buf_idx;
-	u32 msg_slots = mei_data2slots(len);
+	size_t len;
+	u32 msg_slots;
+	int rets;
+
+
+	if (WARN_ON(!cl || !cl->dev))
+		return -ENODEV;
+
+	dev = cl->dev;
+
+	buf = &cb->request_buffer;
+
+	rets = mei_cl_flow_ctrl_creds(cl);
+	if (rets < 0)
+		return rets;
+
+	if (rets == 0) {
+		cl_dbg(dev, cl,	"No flow control credentials: not sending.\n");
+		return 0;
+	}
+
+	len = buf->size - cb->buf_idx;
+	msg_slots = mei_data2slots(len);
 
 	mei_hdr.host_addr = cl->host_client_id;
 	mei_hdr.me_addr = cl->me_client_id;
@@ -714,16 +744,15 @@
 		return 0;
 	}
 
-	dev_dbg(&dev->pdev->dev, "buf: size = %d idx = %lu\n",
+	cl_dbg(dev, cl, "buf: size = %d idx = %lu\n",
 			cb->request_buffer.size, cb->buf_idx);
-	dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(&mei_hdr));
 
 	*slots -=  msg_slots;
-	if (mei_write_message(dev, &mei_hdr,
-			cb->request_buffer.data + cb->buf_idx)) {
-		cl->status = -ENODEV;
+	rets = mei_write_message(dev, &mei_hdr, buf->data + cb->buf_idx);
+	if (rets) {
+		cl->status = rets;
 		list_move_tail(&cb->list, &cmpl_list->list);
-		return -ENODEV;
+		return rets;
 	}
 
 	cl->status = 0;
@@ -732,7 +761,7 @@
 
 	if (mei_hdr.msg_complete) {
 		if (mei_cl_flow_ctrl_reduce(cl))
-			return -ENODEV;
+			return -EIO;
 		list_move_tail(&cb->list, &dev->write_waiting_list.list);
 	}
 
@@ -767,7 +796,7 @@
 
 	buf = &cb->request_buffer;
 
-	dev_dbg(&dev->pdev->dev, "mei_cl_write %d\n", buf->size);
+	cl_dbg(dev, cl, "mei_cl_write %d\n", buf->size);
 
 
 	cb->fop_type = MEI_FOP_WRITE;
@@ -800,14 +829,10 @@
 	mei_hdr.me_addr = cl->me_client_id;
 	mei_hdr.reserved = 0;
 
-	dev_dbg(&dev->pdev->dev, "write " MEI_HDR_FMT "\n",
-		MEI_HDR_PRM(&mei_hdr));
 
-
-	if (mei_write_message(dev, &mei_hdr, buf->data)) {
-		rets = -EIO;
+	rets = mei_write_message(dev, &mei_hdr, buf->data);
+	if (rets)
 		goto err;
-	}
 
 	cl->writing_state = MEI_WRITING;
 	cb->buf_idx = mei_hdr.length;
@@ -898,11 +923,11 @@
 	struct mei_cl *cl, *next;
 	list_for_each_entry_safe(cl, next, &dev->file_list, link) {
 		if (waitqueue_active(&cl->rx_wait)) {
-			dev_dbg(&dev->pdev->dev, "Waking up reading client!\n");
+			cl_dbg(dev, cl, "Waking up reading client!\n");
 			wake_up_interruptible(&cl->rx_wait);
 		}
 		if (waitqueue_active(&cl->tx_wait)) {
-			dev_dbg(&dev->pdev->dev, "Waking up writing client!\n");
+			cl_dbg(dev, cl, "Waking up writing client!\n");
 			wake_up_interruptible(&cl->tx_wait);
 		}
 	}
diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h
index 892cc42..c8396e5 100644
--- a/drivers/misc/mei/client.h
+++ b/drivers/misc/mei/client.h
@@ -115,4 +115,13 @@
 void mei_cl_all_wakeup(struct mei_device *dev);
 void mei_cl_all_write_clear(struct mei_device *dev);
 
+#define MEI_CL_FMT "cl:host=%02d me=%02d "
+#define MEI_CL_PRM(cl) (cl)->host_client_id, (cl)->me_client_id
+
+#define cl_dbg(dev, cl, format, arg...) \
+	dev_dbg(&(dev)->pdev->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg)
+
+#define cl_err(dev, cl, format, arg...) \
+	dev_err(&(dev)->pdev->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg)
+
 #endif /* _MEI_CLIENT_H_ */
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index 0a044832..9b3a0fb 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -49,7 +49,7 @@
 	kfree(dev->me_clients);
 	dev->me_clients = NULL;
 
-	dev_dbg(&dev->pdev->dev, "memory allocation for ME clients size=%zd.\n",
+	dev_dbg(&dev->pdev->dev, "memory allocation for ME clients size=%ld.\n",
 		dev->me_clients_num * sizeof(struct mei_me_client));
 	/* allocate storage for ME clients representation */
 	clients = kcalloc(dev->me_clients_num,
@@ -174,7 +174,7 @@
 		dev_err(&dev->pdev->dev, "version message write failed\n");
 		dev->dev_state = MEI_DEV_RESETTING;
 		mei_reset(dev, 1);
-		return -ENODEV;
+		return -EIO;
 	}
 	dev->hbm_state = MEI_HBM_START;
 	dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
@@ -677,7 +677,10 @@
 
 	case HOST_ENUM_RES_CMD:
 		enum_res = (struct hbm_host_enum_response *) mei_msg;
-		memcpy(dev->me_clients_map, enum_res->valid_addresses, 32);
+		BUILD_BUG_ON(sizeof(dev->me_clients_map)
+				< sizeof(enum_res->valid_addresses));
+		memcpy(dev->me_clients_map, enum_res->valid_addresses,
+			sizeof(enum_res->valid_addresses));
 		if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
 		    dev->hbm_state == MEI_HBM_ENUM_CLIENTS) {
 				dev->init_clients_timer = 0;
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 6a203b6..6c0fde5 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -110,6 +110,7 @@
 #define MEI_DEV_ID_PPT_3      0x1DBA  /* Panther Point */
 
 #define MEI_DEV_ID_LPT        0x8C3A  /* Lynx Point */
+#define MEI_DEV_ID_LPT_W      0x8D3A  /* Lynx Point - Wellsburg */
 #define MEI_DEV_ID_LPT_LP     0x9C3A  /* Lynx Point LP */
 /*
  * MEI HW Section
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index 6197018..f7f3abb 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -68,6 +68,14 @@
 	mei_io_list_init(&dev->amthif_cmd_list);
 	mei_io_list_init(&dev->amthif_rd_complete_list);
 
+	bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
+	dev->open_handle_count = 0;
+
+	/*
+	 * Reserving the first client ID
+	 * 0: Reserved for MEI Bus Message communications
+	 */
+	bitmap_set(dev->host_clients_map, 0, 1);
 }
 EXPORT_SYMBOL_GPL(mei_device_init);
 
@@ -139,6 +147,10 @@
 			dev->dev_state != MEI_DEV_POWER_DOWN &&
 			dev->dev_state != MEI_DEV_POWER_UP);
 
+	if (unexpected)
+		dev_warn(&dev->pdev->dev, "unexpected reset: dev_state = %s\n",
+			 mei_dev_state_str(dev->dev_state));
+
 	ret = mei_hw_reset(dev, interrupts_enabled);
 	if (ret) {
 		dev_err(&dev->pdev->dev, "hw reset failed disabling the device\n");
@@ -165,12 +177,7 @@
 		/* remove entry if already in list */
 		dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n");
 		mei_cl_unlink(&dev->wd_cl);
-		if (dev->open_handle_count > 0)
-			dev->open_handle_count--;
 		mei_cl_unlink(&dev->iamthif_cl);
-		if (dev->open_handle_count > 0)
-			dev->open_handle_count--;
-
 		mei_amthif_reset_params(dev);
 		memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg));
 	}
@@ -182,10 +189,6 @@
 	dev->rd_msg_hdr = 0;
 	dev->wd_pending = false;
 
-	if (unexpected)
-		dev_warn(&dev->pdev->dev, "unexpected reset: dev_state = %s\n",
-			 mei_dev_state_str(dev->dev_state));
-
 	if (!interrupts_enabled) {
 		dev_dbg(&dev->pdev->dev, "intr not enabled end of reset\n");
 		return;
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 4b59cb7..7a95c07 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -113,13 +113,13 @@
 
 		if (cb->response_buffer.size == 0 ||
 		    cb->response_buffer.data == NULL) {
-			dev_err(&dev->pdev->dev, "response buffer is not allocated.\n");
+			cl_err(dev, cl, "response buffer is not allocated.\n");
 			list_del(&cb->list);
 			return -ENOMEM;
 		}
 
 		if (cb->response_buffer.size < mei_hdr->length + cb->buf_idx) {
-			dev_dbg(&dev->pdev->dev, "message overflow. size %d len %d idx %ld\n",
+			cl_dbg(dev, cl, "message overflow. size %d len %d idx %ld\n",
 				cb->response_buffer.size,
 				mei_hdr->length, cb->buf_idx);
 			buffer = krealloc(cb->response_buffer.data,
@@ -127,7 +127,7 @@
 					  GFP_KERNEL);
 
 			if (!buffer) {
-				dev_err(&dev->pdev->dev, "allocation failed.\n");
+				cl_err(dev, cl, "allocation failed.\n");
 				list_del(&cb->list);
 				return -ENOMEM;
 			}
@@ -143,9 +143,7 @@
 		if (mei_hdr->msg_complete) {
 			cl->status = 0;
 			list_del(&cb->list);
-			dev_dbg(&dev->pdev->dev, "completed read H cl = %d, ME cl = %d, length = %lu\n",
-				cl->host_client_id,
-				cl->me_client_id,
+			cl_dbg(dev, cl, "completed read length = %lu\n",
 				cb->buf_idx);
 			list_add_tail(&cb->list, &complete_list->list);
 		}
@@ -218,9 +216,11 @@
 			   s32 *slots, struct mei_cl_cb *cmpl_list)
 {
 	struct mei_device *dev = cl->dev;
-
 	u32 msg_slots = mei_data2slots(sizeof(struct hbm_flow_control));
 
+	int ret;
+
+
 	if (*slots < msg_slots) {
 		/* return the cancel routine */
 		list_del(&cb->list);
@@ -229,12 +229,14 @@
 
 	*slots -= msg_slots;
 
-	if (mei_hbm_cl_flow_control_req(dev, cl)) {
-		cl->status = -ENODEV;
+	ret = mei_hbm_cl_flow_control_req(dev, cl);
+	if (ret) {
+		cl->status = ret;
 		cb->buf_idx = 0;
 		list_move_tail(&cb->list, &cmpl_list->list);
-		return -ENODEV;
+		return ret;
 	}
+
 	list_move_tail(&cb->list, &dev->read_list.list);
 
 	return 0;
@@ -256,6 +258,7 @@
 			   s32 *slots, struct mei_cl_cb *cmpl_list)
 {
 	struct mei_device *dev = cl->dev;
+	int ret;
 
 	u32 msg_slots =
 		mei_data2slots(sizeof(struct hbm_client_connect_request));
@@ -270,11 +273,12 @@
 
 	cl->state = MEI_FILE_CONNECTING;
 
-	if (mei_hbm_cl_connect_req(dev, cl)) {
-		cl->status = -ENODEV;
+	ret = mei_hbm_cl_connect_req(dev, cl);
+	if (ret) {
+		cl->status = ret;
 		cb->buf_idx = 0;
 		list_del(&cb->list);
-		return -ENODEV;
+		return ret;
 	}
 
 	list_move_tail(&cb->list, &dev->ctrl_rd_list.list);
@@ -345,14 +349,14 @@
 
 	/* decide where to read the message too */
 	if (!mei_hdr->host_addr) {
-		dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_bus_message.\n");
+		dev_dbg(&dev->pdev->dev, "call mei_hbm_dispatch.\n");
 		mei_hbm_dispatch(dev, mei_hdr);
-		dev_dbg(&dev->pdev->dev, "end mei_irq_thread_read_bus_message.\n");
+		dev_dbg(&dev->pdev->dev, "end mei_hbm_dispatch.\n");
 	} else if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id &&
 		   (MEI_FILE_CONNECTED == dev->iamthif_cl.state) &&
 		   (dev->iamthif_state == MEI_IAMTHIF_READING)) {
 
-		dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_iamthif_message.\n");
+		dev_dbg(&dev->pdev->dev, "call mei_amthif_irq_read_msg.\n");
 		dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
 
 		ret = mei_amthif_irq_read_msg(dev, mei_hdr, cmpl_list);
@@ -423,12 +427,12 @@
 		if (MEI_WRITING == cl->writing_state &&
 		    cb->fop_type == MEI_FOP_WRITE &&
 		    cl != &dev->iamthif_cl) {
-			dev_dbg(&dev->pdev->dev, "MEI WRITE COMPLETE\n");
+			cl_dbg(dev, cl, "MEI WRITE COMPLETE\n");
 			cl->writing_state = MEI_WRITE_COMPLETE;
 			list_add_tail(&cb->list, &cmpl_list->list);
 		}
 		if (cl == &dev->iamthif_cl) {
-			dev_dbg(&dev->pdev->dev, "check iamthif flow control.\n");
+			cl_dbg(dev, cl, "check iamthif flow control.\n");
 			if (dev->iamthif_flow_control_pending) {
 				ret = mei_amthif_irq_read(dev, &slots);
 				if (ret)
@@ -509,13 +513,6 @@
 		cl = cb->cl;
 		if (cl == NULL)
 			continue;
-		if (mei_cl_flow_ctrl_creds(cl) <= 0) {
-			dev_dbg(&dev->pdev->dev,
-				"No flow control credentials for client %d, not sending.\n",
-				cl->host_client_id);
-			continue;
-		}
-
 		if (cl == &dev->iamthif_cl)
 			ret = mei_amthif_irq_write_complete(cl, cb,
 						&slots, cmpl_list);
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index cabeddd..9661a81 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -60,48 +60,45 @@
 
 	int err;
 
-	err = -ENODEV;
 	if (!misc->parent)
-		goto out;
+		return -ENODEV;
 
 	pdev = container_of(misc->parent, struct pci_dev, dev);
 
 	dev = pci_get_drvdata(pdev);
 	if (!dev)
-		goto out;
+		return -ENODEV;
 
 	mutex_lock(&dev->device_lock);
-	err = -ENOMEM;
-	cl = mei_cl_allocate(dev);
-	if (!cl)
-		goto out_unlock;
+
+	cl = NULL;
 
 	err = -ENODEV;
 	if (dev->dev_state != MEI_DEV_ENABLED) {
 		dev_dbg(&dev->pdev->dev, "dev_state != MEI_ENABLED  dev_state = %s\n",
 		    mei_dev_state_str(dev->dev_state));
-		goto out_unlock;
-	}
-	err = -EMFILE;
-	if (dev->open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) {
-		dev_err(&dev->pdev->dev, "open_handle_count exceded %d",
-			MEI_MAX_OPEN_HANDLE_COUNT);
-		goto out_unlock;
+		goto err_unlock;
 	}
 
+	err = -ENOMEM;
+	cl = mei_cl_allocate(dev);
+	if (!cl)
+		goto err_unlock;
+
+	/* open_handle_count check is handled in the mei_cl_link */
 	err = mei_cl_link(cl, MEI_HOST_CLIENT_ID_ANY);
 	if (err)
-		goto out_unlock;
+		goto err_unlock;
 
 	file->private_data = cl;
+
 	mutex_unlock(&dev->device_lock);
 
 	return nonseekable_open(inode, file);
 
-out_unlock:
+err_unlock:
 	mutex_unlock(&dev->device_lock);
 	kfree(cl);
-out:
 	return err;
 }
 
@@ -144,10 +141,6 @@
 	    cl->host_client_id,
 	    cl->me_client_id);
 
-	if (dev->open_handle_count > 0) {
-		clear_bit(cl->host_client_id, dev->host_clients_map);
-		dev->open_handle_count--;
-	}
 	mei_cl_unlink(cl);
 
 
@@ -165,10 +158,7 @@
 
 	file->private_data = NULL;
 
-	if (cb) {
-		mei_io_cb_free(cb);
-		cb = NULL;
-	}
+	mei_io_cb_free(cb);
 
 	kfree(cl);
 out:
@@ -203,12 +193,18 @@
 
 	dev = cl->dev;
 
+
 	mutex_lock(&dev->device_lock);
 	if (dev->dev_state != MEI_DEV_ENABLED) {
 		rets = -ENODEV;
 		goto out;
 	}
 
+	if (length == 0) {
+		rets = 0;
+		goto out;
+	}
+
 	if (cl == &dev->iamthif_cl) {
 		rets = mei_amthif_read(dev, file, ubuf, length, offset);
 		goto out;
@@ -347,8 +343,14 @@
 		rets = -ENODEV;
 		goto out;
 	}
-	if (length > dev->me_clients[id].props.max_msg_length || length <= 0) {
-		rets = -EMSGSIZE;
+
+	if (length == 0) {
+		rets = 0;
+		goto out;
+	}
+
+	if (length > dev->me_clients[id].props.max_msg_length) {
+		rets = -EFBIG;
 		goto out;
 	}
 
@@ -401,8 +403,11 @@
 		goto out;
 
 	rets = copy_from_user(write_cb->request_buffer.data, ubuf, length);
-	if (rets)
+	if (rets) {
+		dev_err(&dev->pdev->dev, "failed to copy data from userland\n");
+		rets = -EFAULT;
 		goto out;
+	}
 
 	if (cl == &dev->iamthif_cl) {
 		rets = mei_amthif_write(dev, write_cb);
@@ -489,11 +494,11 @@
 			rets = -ENODEV;
 			goto end;
 		}
-		clear_bit(cl->host_client_id, dev->host_clients_map);
 		mei_cl_unlink(cl);
 
 		kfree(cl);
 		cl = NULL;
+		dev->iamthif_open_count++;
 		file->private_data = &dev->iamthif_cl;
 
 		client = &data->out_client_properties;
@@ -564,7 +569,7 @@
 	dev_dbg(&dev->pdev->dev, "copy connect data from user\n");
 	if (copy_from_user(connect_data, (char __user *)data,
 				sizeof(struct mei_connect_client_data))) {
-		dev_dbg(&dev->pdev->dev, "failed to copy data from userland\n");
+		dev_err(&dev->pdev->dev, "failed to copy data from userland\n");
 		rets = -EFAULT;
 		goto out;
 	}
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 456b322..406f68e 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -414,6 +414,7 @@
 	struct file *iamthif_file_object;
 	struct mei_cl iamthif_cl;
 	struct mei_cl_cb *iamthif_current_cb;
+	long iamthif_open_count;
 	int iamthif_mtu;
 	unsigned long iamthif_timer;
 	u32 iamthif_stall_timer;
diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c
index d0c6907..994ca4a 100644
--- a/drivers/misc/mei/nfc.c
+++ b/drivers/misc/mei/nfc.c
@@ -485,8 +485,11 @@
 	if (ndev->cl_info)
 		return 0;
 
-	cl_info = mei_cl_allocate(dev);
-	cl = mei_cl_allocate(dev);
+	ndev->cl_info = mei_cl_allocate(dev);
+	ndev->cl = mei_cl_allocate(dev);
+
+	cl = ndev->cl;
+	cl_info = ndev->cl_info;
 
 	if (!cl || !cl_info) {
 		ret = -ENOMEM;
@@ -527,10 +530,9 @@
 
 	cl->device_uuid = mei_nfc_guid;
 
+
 	list_add_tail(&cl->device_link, &dev->device_list);
 
-	ndev->cl_info = cl_info;
-	ndev->cl = cl;
 	ndev->req_id = 1;
 
 	INIT_WORK(&ndev->init_work, mei_nfc_init);
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 1b3844e..b96205a 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -77,6 +77,7 @@
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_2)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_3)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_W)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_LP)},
 
 	/* required last entry */
@@ -189,7 +190,7 @@
 
 	schedule_delayed_work(&dev->timer_work, HZ);
 
-	pr_debug("initialization successful.\n");
+	dev_dbg(&pdev->dev, "initialization successful.\n");
 
 	return 0;
 
@@ -231,7 +232,7 @@
 	hw = to_me_hw(dev);
 
 
-	dev_err(&pdev->dev, "stop\n");
+	dev_dbg(&pdev->dev, "stop\n");
 	mei_stop(dev);
 
 	/* disable interrupts */
@@ -239,7 +240,6 @@
 
 	free_irq(pdev->irq, dev);
 	pci_disable_msi(pdev);
-	pci_set_drvdata(pdev, NULL);
 
 	if (hw->mem_addr)
 		pci_iounmap(pdev, hw->mem_addr);
@@ -262,7 +262,7 @@
 	if (!dev)
 		return -ENODEV;
 
-	dev_err(&pdev->dev, "suspend\n");
+	dev_dbg(&pdev->dev, "suspend\n");
 
 	mei_stop(dev);
 
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index b892143..9e35421 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -60,7 +60,7 @@
 int mei_wd_host_init(struct mei_device *dev)
 {
 	struct mei_cl *cl = &dev->wd_cl;
-	int i;
+	int id;
 	int ret;
 
 	mei_cl_init(cl, dev);
@@ -70,19 +70,19 @@
 
 
 	/* check for valid client id */
-	i = mei_me_cl_by_uuid(dev, &mei_wd_guid);
-	if (i < 0) {
+	id = mei_me_cl_by_uuid(dev, &mei_wd_guid);
+	if (id < 0) {
 		dev_info(&dev->pdev->dev, "wd: failed to find the client\n");
-		return -ENOENT;
+		return id;
 	}
 
-	cl->me_client_id = dev->me_clients[i].client_id;
+	cl->me_client_id = dev->me_clients[id].client_id;
 
 	ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID);
 
 	if (ret < 0) {
 		dev_info(&dev->pdev->dev, "wd: failed link client\n");
-		return -ENOENT;
+		return ret;
 	}
 
 	cl->state = MEI_FILE_CONNECTING;
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
new file mode 100644
index 0000000..e42b331
--- /dev/null
+++ b/drivers/misc/mic/Kconfig
@@ -0,0 +1,39 @@
+comment "Intel MIC Host Driver"
+
+config INTEL_MIC_HOST
+	tristate "Intel MIC Host Driver"
+	depends on 64BIT && PCI && X86
+	select VHOST_RING
+	default N
+	help
+	  This enables Host Driver support for the Intel Many Integrated
+	  Core (MIC) family of PCIe form factor coprocessor devices that
+	  run a 64 bit Linux OS. The driver manages card OS state and
+	  enables communication between host and card. Intel MIC X100
+	  devices are currently supported.
+
+	  If you are building a host kernel with an Intel MIC device then
+	  say M (recommended) or Y, else say N. If unsure say N.
+
+	  More information about the Intel MIC family as well as the Linux
+	  OS and tools for MIC to use with this driver are available from
+	  <http://software.intel.com/en-us/mic-developer>.
+
+comment "Intel MIC Card Driver"
+
+config INTEL_MIC_CARD
+	tristate "Intel MIC Card Driver"
+	depends on 64BIT && X86
+	select VIRTIO
+	default N
+	help
+	  This enables card driver support for the Intel Many Integrated
+	  Core (MIC) device family. The card driver communicates shutdown/
+	  crash events to the host and allows registration/configuration of
+	  virtio devices. Intel MIC X100 devices are currently supported.
+
+	  If you are building a card kernel for an Intel MIC device then
+	  say M (recommended) or Y, else say N. If unsure say N.
+
+	  For more information see
+	  <http://software.intel.com/en-us/mic-developer>.
diff --git a/drivers/misc/mic/Makefile b/drivers/misc/mic/Makefile
new file mode 100644
index 0000000..05b34d6
--- /dev/null
+++ b/drivers/misc/mic/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile - Intel MIC Linux driver.
+# Copyright(c) 2013, Intel Corporation.
+#
+obj-$(CONFIG_INTEL_MIC_HOST) += host/
+obj-$(CONFIG_INTEL_MIC_CARD) += card/
diff --git a/drivers/misc/mic/card/Makefile b/drivers/misc/mic/card/Makefile
new file mode 100644
index 0000000..69d58be
--- /dev/null
+++ b/drivers/misc/mic/card/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile - Intel MIC Linux driver.
+# Copyright(c) 2013, Intel Corporation.
+#
+ccflags-y += -DINTEL_MIC_CARD
+
+obj-$(CONFIG_INTEL_MIC_CARD) += mic_card.o
+mic_card-y += mic_x100.o
+mic_card-y += mic_device.o
+mic_card-y += mic_debugfs.o
+mic_card-y += mic_virtio.o
diff --git a/drivers/misc/mic/card/mic_debugfs.c b/drivers/misc/mic/card/mic_debugfs.c
new file mode 100644
index 0000000..421b3d7
--- /dev/null
+++ b/drivers/misc/mic/card/mic_debugfs.c
@@ -0,0 +1,130 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Disclaimer: The codes contained in these modules may be specific to
+ * the Intel Software Development Platform codenamed: Knights Ferry, and
+ * the Intel product codenamed: Knights Corner, and are not backward
+ * compatible with other Intel products. Additionally, Intel will NOT
+ * support the codes or instruction set in future products.
+ *
+ * Intel MIC Card driver.
+ *
+ */
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+
+/* Debugfs parent dir */
+static struct dentry *mic_dbg;
+
+/**
+ * mic_intr_test - Send interrupts to host.
+ */
+static int mic_intr_test(struct seq_file *s, void *unused)
+{
+	struct mic_driver *mdrv = s->private;
+	struct mic_device *mdev = &mdrv->mdev;
+
+	mic_send_intr(mdev, 0);
+	msleep(1000);
+	mic_send_intr(mdev, 1);
+	msleep(1000);
+	mic_send_intr(mdev, 2);
+	msleep(1000);
+	mic_send_intr(mdev, 3);
+	msleep(1000);
+
+	return 0;
+}
+
+static int mic_intr_test_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_intr_test, inode->i_private);
+}
+
+static int mic_intr_test_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations intr_test_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_intr_test_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_intr_test_release
+};
+
+/**
+ * mic_create_card_debug_dir - Initialize MIC debugfs entries.
+ */
+void __init mic_create_card_debug_dir(struct mic_driver *mdrv)
+{
+	struct dentry *d;
+
+	if (!mic_dbg)
+		return;
+
+	mdrv->dbg_dir = debugfs_create_dir(mdrv->name, mic_dbg);
+	if (!mdrv->dbg_dir) {
+		dev_err(mdrv->dev, "Cant create dbg_dir %s\n", mdrv->name);
+		return;
+	}
+
+	d = debugfs_create_file("intr_test", 0444, mdrv->dbg_dir,
+		mdrv, &intr_test_ops);
+
+	if (!d) {
+		dev_err(mdrv->dev,
+			"Cant create dbg intr_test %s\n", mdrv->name);
+		return;
+	}
+}
+
+/**
+ * mic_delete_card_debug_dir - Uninitialize MIC debugfs entries.
+ */
+void mic_delete_card_debug_dir(struct mic_driver *mdrv)
+{
+	if (!mdrv->dbg_dir)
+		return;
+
+	debugfs_remove_recursive(mdrv->dbg_dir);
+}
+
+/**
+ * mic_init_card_debugfs - Initialize global debugfs entry.
+ */
+void __init mic_init_card_debugfs(void)
+{
+	mic_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	if (!mic_dbg)
+		pr_err("can't create debugfs dir\n");
+}
+
+/**
+ * mic_exit_card_debugfs - Uninitialize global debugfs entry
+ */
+void mic_exit_card_debugfs(void)
+{
+	debugfs_remove(mic_dbg);
+}
diff --git a/drivers/misc/mic/card/mic_device.c b/drivers/misc/mic/card/mic_device.c
new file mode 100644
index 0000000..d0980ff
--- /dev/null
+++ b/drivers/misc/mic/card/mic_device.c
@@ -0,0 +1,305 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Disclaimer: The codes contained in these modules may be specific to
+ * the Intel Software Development Platform codenamed: Knights Ferry, and
+ * the Intel product codenamed: Knights Corner, and are not backward
+ * compatible with other Intel products. Additionally, Intel will NOT
+ * support the codes or instruction set in future products.
+ *
+ * Intel MIC Card driver.
+ *
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_virtio.h"
+
+static struct mic_driver *g_drv;
+static struct mic_irq *shutdown_cookie;
+
+static void mic_notify_host(u8 state)
+{
+	struct mic_driver *mdrv = g_drv;
+	struct mic_bootparam __iomem *bootparam = mdrv->dp;
+
+	iowrite8(state, &bootparam->shutdown_status);
+	dev_dbg(mdrv->dev, "%s %d system_state %d\n",
+		__func__, __LINE__, state);
+	mic_send_intr(&mdrv->mdev, ioread8(&bootparam->c2h_shutdown_db));
+}
+
+static int mic_panic_event(struct notifier_block *this, unsigned long event,
+		void *ptr)
+{
+	struct mic_driver *mdrv = g_drv;
+	struct mic_bootparam __iomem *bootparam = mdrv->dp;
+
+	iowrite8(-1, &bootparam->h2c_config_db);
+	iowrite8(-1, &bootparam->h2c_shutdown_db);
+	mic_notify_host(MIC_CRASHED);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block mic_panic = {
+	.notifier_call  = mic_panic_event,
+};
+
+static irqreturn_t mic_shutdown_isr(int irq, void *data)
+{
+	struct mic_driver *mdrv = g_drv;
+	struct mic_bootparam __iomem *bootparam = mdrv->dp;
+
+	mic_ack_interrupt(&g_drv->mdev);
+	if (ioread8(&bootparam->shutdown_card))
+		orderly_poweroff(true);
+	return IRQ_HANDLED;
+}
+
+static int mic_shutdown_init(void)
+{
+	int rc = 0;
+	struct mic_driver *mdrv = g_drv;
+	struct mic_bootparam __iomem *bootparam = mdrv->dp;
+	int shutdown_db;
+
+	shutdown_db = mic_next_card_db();
+	shutdown_cookie = mic_request_card_irq(mic_shutdown_isr,
+			"Shutdown", mdrv, shutdown_db);
+	if (IS_ERR(shutdown_cookie))
+		rc = PTR_ERR(shutdown_cookie);
+	else
+		iowrite8(shutdown_db, &bootparam->h2c_shutdown_db);
+	return rc;
+}
+
+static void mic_shutdown_uninit(void)
+{
+	struct mic_driver *mdrv = g_drv;
+	struct mic_bootparam __iomem *bootparam = mdrv->dp;
+
+	iowrite8(-1, &bootparam->h2c_shutdown_db);
+	mic_free_card_irq(shutdown_cookie, mdrv);
+}
+
+static int __init mic_dp_init(void)
+{
+	struct mic_driver *mdrv = g_drv;
+	struct mic_device *mdev = &mdrv->mdev;
+	struct mic_bootparam __iomem *bootparam;
+	u64 lo, hi, dp_dma_addr;
+	u32 magic;
+
+	lo = mic_read_spad(&mdrv->mdev, MIC_DPLO_SPAD);
+	hi = mic_read_spad(&mdrv->mdev, MIC_DPHI_SPAD);
+
+	dp_dma_addr = lo | (hi << 32);
+	mdrv->dp = mic_card_map(mdev, dp_dma_addr, MIC_DP_SIZE);
+	if (!mdrv->dp) {
+		dev_err(mdrv->dev, "Cannot remap Aperture BAR\n");
+		return -ENOMEM;
+	}
+	bootparam = mdrv->dp;
+	magic = ioread32(&bootparam->magic);
+	if (MIC_MAGIC != magic) {
+		dev_err(mdrv->dev, "bootparam magic mismatch 0x%x\n", magic);
+		return -EIO;
+	}
+	return 0;
+}
+
+/* Uninitialize the device page */
+static void mic_dp_uninit(void)
+{
+	mic_card_unmap(&g_drv->mdev, g_drv->dp);
+}
+
+/**
+ * mic_request_card_irq - request an irq.
+ *
+ * @func: The callback function that handles the interrupt.
+ * @name: The ASCII name of the callee requesting the irq.
+ * @data: private data that is returned back when calling the
+ * function handler.
+ * @index: The doorbell index of the requester.
+ *
+ * returns: The cookie that is transparent to the caller. Passed
+ * back when calling mic_free_irq. An appropriate error code
+ * is returned on failure. Caller needs to use IS_ERR(return_val)
+ * to check for failure and PTR_ERR(return_val) to obtained the
+ * error code.
+ *
+ */
+struct mic_irq *mic_request_card_irq(irqreturn_t (*func)(int irq, void *data),
+	const char *name, void *data, int index)
+{
+	int rc = 0;
+	unsigned long cookie;
+	struct mic_driver *mdrv = g_drv;
+
+	rc  = request_irq(mic_db_to_irq(mdrv, index), func,
+		0, name, data);
+	if (rc) {
+		dev_err(mdrv->dev, "request_irq failed rc = %d\n", rc);
+		goto err;
+	}
+	mdrv->irq_info.irq_usage_count[index]++;
+	cookie = index;
+	return (struct mic_irq *)cookie;
+err:
+	return ERR_PTR(rc);
+}
+
+/**
+ * mic_free_card_irq - free irq.
+ *
+ * @cookie: cookie obtained during a successful call to mic_request_irq
+ * @data: private data specified by the calling function during the
+ * mic_request_irq
+ *
+ * returns: none.
+ */
+void mic_free_card_irq(struct mic_irq *cookie, void *data)
+{
+	int index;
+	struct mic_driver *mdrv = g_drv;
+
+	index = (unsigned long)cookie & 0xFFFFU;
+	free_irq(mic_db_to_irq(mdrv, index), data);
+	mdrv->irq_info.irq_usage_count[index]--;
+}
+
+/**
+ * mic_next_card_db - Get the doorbell with minimum usage count.
+ *
+ * Returns the irq index.
+ */
+int mic_next_card_db(void)
+{
+	int i;
+	int index = 0;
+	struct mic_driver *mdrv = g_drv;
+
+	for (i = 0; i < mdrv->intr_info.num_intr; i++) {
+		if (mdrv->irq_info.irq_usage_count[i] <
+			mdrv->irq_info.irq_usage_count[index])
+			index = i;
+	}
+
+	return index;
+}
+
+/**
+ * mic_init_irq - Initialize irq information.
+ *
+ * Returns 0 in success. Appropriate error code on failure.
+ */
+static int mic_init_irq(void)
+{
+	struct mic_driver *mdrv = g_drv;
+
+	mdrv->irq_info.irq_usage_count = kzalloc((sizeof(u32) *
+			mdrv->intr_info.num_intr),
+			GFP_KERNEL);
+	if (!mdrv->irq_info.irq_usage_count)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * mic_uninit_irq - Uninitialize irq information.
+ *
+ * None.
+ */
+static void mic_uninit_irq(void)
+{
+	struct mic_driver *mdrv = g_drv;
+
+	kfree(mdrv->irq_info.irq_usage_count);
+}
+
+/*
+ * mic_driver_init - MIC driver initialization tasks.
+ *
+ * Returns 0 in success. Appropriate error code on failure.
+ */
+int __init mic_driver_init(struct mic_driver *mdrv)
+{
+	int rc;
+
+	g_drv = mdrv;
+	/*
+	 * Unloading the card module is not supported. The MIC card module
+	 * handles fundamental operations like host/card initiated shutdowns
+	 * and informing the host about card crashes and cannot be unloaded.
+	 */
+	if (!try_module_get(mdrv->dev->driver->owner)) {
+		rc = -ENODEV;
+		goto done;
+	}
+	rc = mic_dp_init();
+	if (rc)
+		goto put;
+	rc = mic_init_irq();
+	if (rc)
+		goto dp_uninit;
+	rc = mic_shutdown_init();
+	if (rc)
+		goto irq_uninit;
+	rc = mic_devices_init(mdrv);
+	if (rc)
+		goto shutdown_uninit;
+	mic_create_card_debug_dir(mdrv);
+	atomic_notifier_chain_register(&panic_notifier_list, &mic_panic);
+done:
+	return rc;
+shutdown_uninit:
+	mic_shutdown_uninit();
+irq_uninit:
+	mic_uninit_irq();
+dp_uninit:
+	mic_dp_uninit();
+put:
+	module_put(mdrv->dev->driver->owner);
+	return rc;
+}
+
+/*
+ * mic_driver_uninit - MIC driver uninitialization tasks.
+ *
+ * Returns None
+ */
+void mic_driver_uninit(struct mic_driver *mdrv)
+{
+	mic_delete_card_debug_dir(mdrv);
+	mic_devices_uninit(mdrv);
+	/*
+	 * Inform the host about the shutdown status i.e. poweroff/restart etc.
+	 * The module cannot be unloaded so the only code path to call
+	 * mic_devices_uninit(..) is the shutdown callback.
+	 */
+	mic_notify_host(system_state);
+	mic_shutdown_uninit();
+	mic_uninit_irq();
+	mic_dp_uninit();
+	module_put(mdrv->dev->driver->owner);
+}
diff --git a/drivers/misc/mic/card/mic_device.h b/drivers/misc/mic/card/mic_device.h
new file mode 100644
index 0000000..347b9b3
--- /dev/null
+++ b/drivers/misc/mic/card/mic_device.h
@@ -0,0 +1,133 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Disclaimer: The codes contained in these modules may be specific to
+ * the Intel Software Development Platform codenamed: Knights Ferry, and
+ * the Intel product codenamed: Knights Corner, and are not backward
+ * compatible with other Intel products. Additionally, Intel will NOT
+ * support the codes or instruction set in future products.
+ *
+ * Intel MIC Card driver.
+ *
+ */
+#ifndef _MIC_CARD_DEVICE_H_
+#define _MIC_CARD_DEVICE_H_
+
+#include <linux/workqueue.h>
+#include <linux/io.h>
+
+/**
+ * struct mic_intr_info - Contains h/w specific interrupt sources info
+ *
+ * @num_intr: The number of irqs available
+ */
+struct mic_intr_info {
+	u32 num_intr;
+};
+
+/**
+ * struct mic_irq_info - OS specific irq information
+ *
+ * @irq_usage_count: usage count array tracking the number of sources
+ * assigned for each irq.
+ */
+struct mic_irq_info {
+	int *irq_usage_count;
+};
+
+/**
+ * struct mic_device -  MIC device information.
+ *
+ * @mmio: MMIO bar information.
+ */
+struct mic_device {
+	struct mic_mw mmio;
+};
+
+/**
+ * struct mic_driver - MIC card driver information.
+ *
+ * @name: Name for MIC driver.
+ * @dbg_dir: debugfs directory of this MIC device.
+ * @dev: The device backing this MIC.
+ * @dp: The pointer to the virtio device page.
+ * @mdev: MIC device information for the host.
+ * @hotplug_work: Hot plug work for adding/removing virtio devices.
+ * @irq_info: The OS specific irq information
+ * @intr_info: H/W specific interrupt information.
+ */
+struct mic_driver {
+	char name[20];
+	struct dentry *dbg_dir;
+	struct device *dev;
+	void __iomem *dp;
+	struct mic_device mdev;
+	struct work_struct hotplug_work;
+	struct mic_irq_info irq_info;
+	struct mic_intr_info intr_info;
+};
+
+/**
+ * struct mic_irq - opaque pointer used as cookie
+ */
+struct mic_irq;
+
+/**
+ * mic_mmio_read - read from an MMIO register.
+ * @mw: MMIO register base virtual address.
+ * @offset: register offset.
+ *
+ * RETURNS: register value.
+ */
+static inline u32 mic_mmio_read(struct mic_mw *mw, u32 offset)
+{
+	return ioread32(mw->va + offset);
+}
+
+/**
+ * mic_mmio_write - write to an MMIO register.
+ * @mw: MMIO register base virtual address.
+ * @val: the data value to put into the register
+ * @offset: register offset.
+ *
+ * RETURNS: none.
+ */
+static inline void
+mic_mmio_write(struct mic_mw *mw, u32 val, u32 offset)
+{
+	iowrite32(val, mw->va + offset);
+}
+
+int mic_driver_init(struct mic_driver *mdrv);
+void mic_driver_uninit(struct mic_driver *mdrv);
+int mic_next_card_db(void);
+struct mic_irq *mic_request_card_irq(irqreturn_t (*func)(int irq, void *data),
+	const char *name, void *data, int intr_src);
+void mic_free_card_irq(struct mic_irq *cookie, void *data);
+u32 mic_read_spad(struct mic_device *mdev, unsigned int idx);
+void mic_send_intr(struct mic_device *mdev, int doorbell);
+int mic_db_to_irq(struct mic_driver *mdrv, int db);
+u32 mic_ack_interrupt(struct mic_device *mdev);
+void mic_hw_intr_init(struct mic_driver *mdrv);
+void __iomem *
+mic_card_map(struct mic_device *mdev, dma_addr_t addr, size_t size);
+void mic_card_unmap(struct mic_device *mdev, void __iomem *addr);
+void __init mic_create_card_debug_dir(struct mic_driver *mdrv);
+void mic_delete_card_debug_dir(struct mic_driver *mdrv);
+void __init mic_init_card_debugfs(void);
+void mic_exit_card_debugfs(void);
+#endif
diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c
new file mode 100644
index 0000000..914cc9b
--- /dev/null
+++ b/drivers/misc/mic/card/mic_virtio.c
@@ -0,0 +1,630 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Disclaimer: The codes contained in these modules may be specific to
+ * the Intel Software Development Platform codenamed: Knights Ferry, and
+ * the Intel product codenamed: Knights Corner, and are not backward
+ * compatible with other Intel products. Additionally, Intel will NOT
+ * support the codes or instruction set in future products.
+ *
+ * Adapted from:
+ *
+ * virtio for kvm on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ *
+ * Intel MIC Card driver.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/virtio_config.h>
+
+#include "../common/mic_dev.h"
+#include "mic_virtio.h"
+
+#define VIRTIO_SUBCODE_64 0x0D00
+
+#define MIC_MAX_VRINGS                4
+struct mic_vdev {
+	struct virtio_device vdev;
+	struct mic_device_desc __iomem *desc;
+	struct mic_device_ctrl __iomem *dc;
+	struct mic_device *mdev;
+	void __iomem *vr[MIC_MAX_VRINGS];
+	int used_size[MIC_MAX_VRINGS];
+	struct completion reset_done;
+	struct mic_irq *virtio_cookie;
+	int c2h_vdev_db;
+};
+
+static struct mic_irq *virtio_config_cookie;
+#define to_micvdev(vd) container_of(vd, struct mic_vdev, vdev)
+
+/* Helper API to obtain the parent of the virtio device */
+static inline struct device *mic_dev(struct mic_vdev *mvdev)
+{
+	return mvdev->vdev.dev.parent;
+}
+
+/* This gets the device's feature bits. */
+static u32 mic_get_features(struct virtio_device *vdev)
+{
+	unsigned int i, bits;
+	u32 features = 0;
+	struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc;
+	u8 __iomem *in_features = mic_vq_features(desc);
+	int feature_len = ioread8(&desc->feature_len);
+
+	bits = min_t(unsigned, feature_len,
+		sizeof(vdev->features)) * 8;
+	for (i = 0; i < bits; i++)
+		if (ioread8(&in_features[i / 8]) & (BIT(i % 8)))
+			features |= BIT(i);
+
+	return features;
+}
+
+static void mic_finalize_features(struct virtio_device *vdev)
+{
+	unsigned int i, bits;
+	struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc;
+	u8 feature_len = ioread8(&desc->feature_len);
+	/* Second half of bitmap is features we accept. */
+	u8 __iomem *out_features =
+		mic_vq_features(desc) + feature_len;
+
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
+	memset_io(out_features, 0, feature_len);
+	bits = min_t(unsigned, feature_len,
+		sizeof(vdev->features)) * 8;
+	for (i = 0; i < bits; i++) {
+		if (test_bit(i, vdev->features))
+			iowrite8(ioread8(&out_features[i / 8]) | (1 << (i % 8)),
+				 &out_features[i / 8]);
+	}
+}
+
+/*
+ * Reading and writing elements in config space
+ */
+static void mic_get(struct virtio_device *vdev, unsigned int offset,
+		   void *buf, unsigned len)
+{
+	struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc;
+
+	if (offset + len > ioread8(&desc->config_len))
+		return;
+	memcpy_fromio(buf, mic_vq_configspace(desc) + offset, len);
+}
+
+static void mic_set(struct virtio_device *vdev, unsigned int offset,
+		   const void *buf, unsigned len)
+{
+	struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc;
+
+	if (offset + len > ioread8(&desc->config_len))
+		return;
+	memcpy_toio(mic_vq_configspace(desc) + offset, buf, len);
+}
+
+/*
+ * The operations to get and set the status word just access the status
+ * field of the device descriptor. set_status also interrupts the host
+ * to tell about status changes.
+ */
+static u8 mic_get_status(struct virtio_device *vdev)
+{
+	return ioread8(&to_micvdev(vdev)->desc->status);
+}
+
+static void mic_set_status(struct virtio_device *vdev, u8 status)
+{
+	struct mic_vdev *mvdev = to_micvdev(vdev);
+	if (!status)
+		return;
+	iowrite8(status, &mvdev->desc->status);
+	mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db);
+}
+
+/* Inform host on a virtio device reset and wait for ack from host */
+static void mic_reset_inform_host(struct virtio_device *vdev)
+{
+	struct mic_vdev *mvdev = to_micvdev(vdev);
+	struct mic_device_ctrl __iomem *dc = mvdev->dc;
+	int retry = 100, i;
+
+	iowrite8(0, &dc->host_ack);
+	iowrite8(1, &dc->vdev_reset);
+	mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db);
+
+	/* Wait till host completes all card accesses and acks the reset */
+	for (i = retry; i--;) {
+		if (ioread8(&dc->host_ack))
+			break;
+		msleep(100);
+	};
+
+	dev_dbg(mic_dev(mvdev), "%s: retry: %d\n", __func__, retry);
+
+	/* Reset status to 0 in case we timed out */
+	iowrite8(0, &mvdev->desc->status);
+}
+
+static void mic_reset(struct virtio_device *vdev)
+{
+	struct mic_vdev *mvdev = to_micvdev(vdev);
+
+	dev_dbg(mic_dev(mvdev), "%s: virtio id %d\n",
+		__func__, vdev->id.device);
+
+	mic_reset_inform_host(vdev);
+	complete_all(&mvdev->reset_done);
+}
+
+/*
+ * The virtio_ring code calls this API when it wants to notify the Host.
+ */
+static void mic_notify(struct virtqueue *vq)
+{
+	struct mic_vdev *mvdev = vq->priv;
+
+	mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db);
+}
+
+static void mic_del_vq(struct virtqueue *vq, int n)
+{
+	struct mic_vdev *mvdev = to_micvdev(vq->vdev);
+	struct vring *vr = (struct vring *)(vq + 1);
+
+	free_pages((unsigned long) vr->used, get_order(mvdev->used_size[n]));
+	vring_del_virtqueue(vq);
+	mic_card_unmap(mvdev->mdev, mvdev->vr[n]);
+	mvdev->vr[n] = NULL;
+}
+
+static void mic_del_vqs(struct virtio_device *vdev)
+{
+	struct mic_vdev *mvdev = to_micvdev(vdev);
+	struct virtqueue *vq, *n;
+	int idx = 0;
+
+	dev_dbg(mic_dev(mvdev), "%s\n", __func__);
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		mic_del_vq(vq, idx++);
+}
+
+/*
+ * This routine will assign vring's allocated in host/io memory. Code in
+ * virtio_ring.c however continues to access this io memory as if it were local
+ * memory without io accessors.
+ */
+static struct virtqueue *mic_find_vq(struct virtio_device *vdev,
+				     unsigned index,
+				     void (*callback)(struct virtqueue *vq),
+				     const char *name)
+{
+	struct mic_vdev *mvdev = to_micvdev(vdev);
+	struct mic_vqconfig __iomem *vqconfig;
+	struct mic_vqconfig config;
+	struct virtqueue *vq;
+	void __iomem *va;
+	struct _mic_vring_info __iomem *info;
+	void *used;
+	int vr_size, _vr_size, err, magic;
+	struct vring *vr;
+	u8 type = ioread8(&mvdev->desc->type);
+
+	if (index >= ioread8(&mvdev->desc->num_vq))
+		return ERR_PTR(-ENOENT);
+
+	if (!name)
+		return ERR_PTR(-ENOENT);
+
+	/* First assign the vring's allocated in host memory */
+	vqconfig = mic_vq_config(mvdev->desc) + index;
+	memcpy_fromio(&config, vqconfig, sizeof(config));
+	_vr_size = vring_size(config.num, MIC_VIRTIO_RING_ALIGN);
+	vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info));
+	va = mic_card_map(mvdev->mdev, config.address, vr_size);
+	if (!va)
+		return ERR_PTR(-ENOMEM);
+	mvdev->vr[index] = va;
+	memset_io(va, 0x0, _vr_size);
+	vq = vring_new_virtqueue(index,
+				config.num, MIC_VIRTIO_RING_ALIGN, vdev,
+				false,
+				va, mic_notify, callback, name);
+	if (!vq) {
+		err = -ENOMEM;
+		goto unmap;
+	}
+	info = va + _vr_size;
+	magic = ioread32(&info->magic);
+
+	if (WARN(magic != MIC_MAGIC + type + index, "magic mismatch")) {
+		err = -EIO;
+		goto unmap;
+	}
+
+	/* Allocate and reassign used ring now */
+	mvdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 +
+			sizeof(struct vring_used_elem) * config.num);
+	used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+					get_order(mvdev->used_size[index]));
+	if (!used) {
+		err = -ENOMEM;
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+		goto del_vq;
+	}
+	iowrite64(virt_to_phys(used), &vqconfig->used_address);
+
+	/*
+	 * To reassign the used ring here we are directly accessing
+	 * struct vring_virtqueue which is a private data structure
+	 * in virtio_ring.c. At the minimum, a BUILD_BUG_ON() in
+	 * vring_new_virtqueue() would ensure that
+	 *  (&vq->vring == (struct vring *) (&vq->vq + 1));
+	 */
+	vr = (struct vring *)(vq + 1);
+	vr->used = used;
+
+	vq->priv = mvdev;
+	return vq;
+del_vq:
+	vring_del_virtqueue(vq);
+unmap:
+	mic_card_unmap(mvdev->mdev, mvdev->vr[index]);
+	return ERR_PTR(err);
+}
+
+static int mic_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[])
+{
+	struct mic_vdev *mvdev = to_micvdev(vdev);
+	struct mic_device_ctrl __iomem *dc = mvdev->dc;
+	int i, err, retry = 100;
+
+	/* We must have this many virtqueues. */
+	if (nvqs > ioread8(&mvdev->desc->num_vq))
+		return -ENOENT;
+
+	for (i = 0; i < nvqs; ++i) {
+		dev_dbg(mic_dev(mvdev), "%s: %d: %s\n",
+			__func__, i, names[i]);
+		vqs[i] = mic_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i])) {
+			err = PTR_ERR(vqs[i]);
+			goto error;
+		}
+	}
+
+	iowrite8(1, &dc->used_address_updated);
+	/*
+	 * Send an interrupt to the host to inform it that used
+	 * rings have been re-assigned.
+	 */
+	mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db);
+	for (i = retry; i--;) {
+		if (!ioread8(&dc->used_address_updated))
+			break;
+		msleep(100);
+	};
+
+	dev_dbg(mic_dev(mvdev), "%s: retry: %d\n", __func__, retry);
+	if (!retry) {
+		err = -ENODEV;
+		goto error;
+	}
+
+	return 0;
+error:
+	mic_del_vqs(vdev);
+	return err;
+}
+
+/*
+ * The config ops structure as defined by virtio config
+ */
+static struct virtio_config_ops mic_vq_config_ops = {
+	.get_features = mic_get_features,
+	.finalize_features = mic_finalize_features,
+	.get = mic_get,
+	.set = mic_set,
+	.get_status = mic_get_status,
+	.set_status = mic_set_status,
+	.reset = mic_reset,
+	.find_vqs = mic_find_vqs,
+	.del_vqs = mic_del_vqs,
+};
+
+static irqreturn_t
+mic_virtio_intr_handler(int irq, void *data)
+{
+	struct mic_vdev *mvdev = data;
+	struct virtqueue *vq;
+
+	mic_ack_interrupt(mvdev->mdev);
+	list_for_each_entry(vq, &mvdev->vdev.vqs, list)
+		vring_interrupt(0, vq);
+
+	return IRQ_HANDLED;
+}
+
+static void mic_virtio_release_dev(struct device *_d)
+{
+	/*
+	 * No need for a release method similar to virtio PCI.
+	 * Provide an empty one to avoid getting a warning from core.
+	 */
+}
+
+/*
+ * adds a new device and register it with virtio
+ * appropriate drivers are loaded by the device model
+ */
+static int mic_add_device(struct mic_device_desc __iomem *d,
+	unsigned int offset, struct mic_driver *mdrv)
+{
+	struct mic_vdev *mvdev;
+	int ret;
+	int virtio_db;
+	u8 type = ioread8(&d->type);
+
+	mvdev = kzalloc(sizeof(*mvdev), GFP_KERNEL);
+	if (!mvdev) {
+		dev_err(mdrv->dev, "Cannot allocate mic dev %u type %u\n",
+			offset, type);
+		return -ENOMEM;
+	}
+
+	mvdev->mdev = &mdrv->mdev;
+	mvdev->vdev.dev.parent = mdrv->dev;
+	mvdev->vdev.dev.release = mic_virtio_release_dev;
+	mvdev->vdev.id.device = type;
+	mvdev->vdev.config = &mic_vq_config_ops;
+	mvdev->desc = d;
+	mvdev->dc = (void __iomem *)d + mic_aligned_desc_size(d);
+	init_completion(&mvdev->reset_done);
+
+	virtio_db = mic_next_card_db();
+	mvdev->virtio_cookie = mic_request_card_irq(mic_virtio_intr_handler,
+			"virtio intr", mvdev, virtio_db);
+	if (IS_ERR(mvdev->virtio_cookie)) {
+		ret = PTR_ERR(mvdev->virtio_cookie);
+		goto kfree;
+	}
+	iowrite8((u8)virtio_db, &mvdev->dc->h2c_vdev_db);
+	mvdev->c2h_vdev_db = ioread8(&mvdev->dc->c2h_vdev_db);
+
+	ret = register_virtio_device(&mvdev->vdev);
+	if (ret) {
+		dev_err(mic_dev(mvdev),
+			"Failed to register mic device %u type %u\n",
+			offset, type);
+		goto free_irq;
+	}
+	iowrite64((u64)mvdev, &mvdev->dc->vdev);
+	dev_dbg(mic_dev(mvdev), "%s: registered mic device %u type %u mvdev %p\n",
+		__func__, offset, type, mvdev);
+
+	return 0;
+
+free_irq:
+	mic_free_card_irq(mvdev->virtio_cookie, mvdev);
+kfree:
+	kfree(mvdev);
+	return ret;
+}
+
+/*
+ * match for a mic device with a specific desc pointer
+ */
+static int mic_match_desc(struct device *dev, void *data)
+{
+	struct virtio_device *vdev = dev_to_virtio(dev);
+	struct mic_vdev *mvdev = to_micvdev(vdev);
+
+	return mvdev->desc == (void __iomem *)data;
+}
+
+static void mic_handle_config_change(struct mic_device_desc __iomem *d,
+	unsigned int offset, struct mic_driver *mdrv)
+{
+	struct mic_device_ctrl __iomem *dc
+		= (void __iomem *)d + mic_aligned_desc_size(d);
+	struct mic_vdev *mvdev = (struct mic_vdev *)ioread64(&dc->vdev);
+	struct virtio_driver *drv;
+
+	if (ioread8(&dc->config_change) != MIC_VIRTIO_PARAM_CONFIG_CHANGED)
+		return;
+
+	dev_dbg(mdrv->dev, "%s %d\n", __func__, __LINE__);
+	drv = container_of(mvdev->vdev.dev.driver,
+				struct virtio_driver, driver);
+	if (drv->config_changed)
+		drv->config_changed(&mvdev->vdev);
+	iowrite8(1, &dc->guest_ack);
+}
+
+/*
+ * removes a virtio device if a hot remove event has been
+ * requested by the host.
+ */
+static int mic_remove_device(struct mic_device_desc __iomem *d,
+	unsigned int offset, struct mic_driver *mdrv)
+{
+	struct mic_device_ctrl __iomem *dc
+		= (void __iomem *)d + mic_aligned_desc_size(d);
+	struct mic_vdev *mvdev = (struct mic_vdev *)ioread64(&dc->vdev);
+	u8 status;
+	int ret = -1;
+
+	if (ioread8(&dc->config_change) == MIC_VIRTIO_PARAM_DEV_REMOVE) {
+		dev_dbg(mdrv->dev,
+			"%s %d config_change %d type %d mvdev %p\n",
+			__func__, __LINE__,
+			ioread8(&dc->config_change), ioread8(&d->type), mvdev);
+
+		status = ioread8(&d->status);
+		INIT_COMPLETION(mvdev->reset_done);
+		unregister_virtio_device(&mvdev->vdev);
+		mic_free_card_irq(mvdev->virtio_cookie, mvdev);
+		if (status & VIRTIO_CONFIG_S_DRIVER_OK)
+			wait_for_completion(&mvdev->reset_done);
+		kfree(mvdev);
+		iowrite8(1, &dc->guest_ack);
+		dev_dbg(mdrv->dev, "%s %d guest_ack %d\n",
+			__func__, __LINE__, ioread8(&dc->guest_ack));
+		ret = 0;
+	}
+
+	return ret;
+}
+
+#define REMOVE_DEVICES true
+
+static void mic_scan_devices(struct mic_driver *mdrv, bool remove)
+{
+	s8 type;
+	unsigned int i;
+	struct mic_device_desc __iomem *d;
+	struct mic_device_ctrl __iomem *dc;
+	struct device *dev;
+	int ret;
+
+	for (i = mic_aligned_size(struct mic_bootparam);
+		i < MIC_DP_SIZE; i += mic_total_desc_size(d)) {
+		d = mdrv->dp + i;
+		dc = (void __iomem *)d + mic_aligned_desc_size(d);
+		/*
+		 * This read barrier is paired with the corresponding write
+		 * barrier on the host which is inserted before adding or
+		 * removing a virtio device descriptor, by updating the type.
+		 */
+		rmb();
+		type = ioread8(&d->type);
+
+		/* end of list */
+		if (type == 0)
+			break;
+
+		if (type == -1)
+			continue;
+
+		/* device already exists */
+		dev = device_find_child(mdrv->dev, d, mic_match_desc);
+		if (dev) {
+			if (remove)
+				iowrite8(MIC_VIRTIO_PARAM_DEV_REMOVE,
+					 &dc->config_change);
+			put_device(dev);
+			mic_handle_config_change(d, i, mdrv);
+			ret = mic_remove_device(d, i, mdrv);
+			if (!ret && !remove)
+				iowrite8(-1, &d->type);
+			if (remove) {
+				iowrite8(0, &dc->config_change);
+				iowrite8(0, &dc->guest_ack);
+			}
+			continue;
+		}
+
+		/* new device */
+		dev_dbg(mdrv->dev, "%s %d Adding new virtio device %p\n",
+			__func__, __LINE__, d);
+		if (!remove)
+			mic_add_device(d, i, mdrv);
+	}
+}
+
+/*
+ * mic_hotplug_device tries to find changes in the device page.
+ */
+static void mic_hotplug_devices(struct work_struct *work)
+{
+	struct mic_driver *mdrv = container_of(work,
+		struct mic_driver, hotplug_work);
+
+	mic_scan_devices(mdrv, !REMOVE_DEVICES);
+}
+
+/*
+ * Interrupt handler for hot plug/config changes etc.
+ */
+static irqreturn_t
+mic_extint_handler(int irq, void *data)
+{
+	struct mic_driver *mdrv = (struct mic_driver *)data;
+
+	dev_dbg(mdrv->dev, "%s %d hotplug work\n",
+		__func__, __LINE__);
+	mic_ack_interrupt(&mdrv->mdev);
+	schedule_work(&mdrv->hotplug_work);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Init function for virtio
+ */
+int mic_devices_init(struct mic_driver *mdrv)
+{
+	int rc;
+	struct mic_bootparam __iomem *bootparam;
+	int config_db;
+
+	INIT_WORK(&mdrv->hotplug_work, mic_hotplug_devices);
+	mic_scan_devices(mdrv, !REMOVE_DEVICES);
+
+	config_db = mic_next_card_db();
+	virtio_config_cookie = mic_request_card_irq(mic_extint_handler,
+			"virtio_config_intr", mdrv, config_db);
+	if (IS_ERR(virtio_config_cookie)) {
+		rc = PTR_ERR(virtio_config_cookie);
+		goto exit;
+	}
+
+	bootparam = mdrv->dp;
+	iowrite8(config_db, &bootparam->h2c_config_db);
+	return 0;
+exit:
+	return rc;
+}
+
+/*
+ * Uninit function for virtio
+ */
+void mic_devices_uninit(struct mic_driver *mdrv)
+{
+	struct mic_bootparam __iomem *bootparam = mdrv->dp;
+	iowrite8(-1, &bootparam->h2c_config_db);
+	mic_free_card_irq(virtio_config_cookie, mdrv);
+	flush_work(&mdrv->hotplug_work);
+	mic_scan_devices(mdrv, REMOVE_DEVICES);
+}
diff --git a/drivers/misc/mic/card/mic_virtio.h b/drivers/misc/mic/card/mic_virtio.h
new file mode 100644
index 0000000..2c5c22c
--- /dev/null
+++ b/drivers/misc/mic/card/mic_virtio.h
@@ -0,0 +1,77 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Disclaimer: The codes contained in these modules may be specific to
+ * the Intel Software Development Platform codenamed: Knights Ferry, and
+ * the Intel product codenamed: Knights Corner, and are not backward
+ * compatible with other Intel products. Additionally, Intel will NOT
+ * support the codes or instruction set in future products.
+ *
+ * Intel MIC Card driver.
+ *
+ */
+#ifndef __MIC_CARD_VIRTIO_H
+#define __MIC_CARD_VIRTIO_H
+
+#include <linux/mic_common.h>
+#include "mic_device.h"
+
+/*
+ * 64 bit I/O access
+ */
+#ifndef ioread64
+#define ioread64 readq
+#endif
+#ifndef iowrite64
+#define iowrite64 writeq
+#endif
+
+static inline unsigned mic_desc_size(struct mic_device_desc __iomem *desc)
+{
+	return mic_aligned_size(*desc)
+		+ ioread8(&desc->num_vq) * mic_aligned_size(struct mic_vqconfig)
+		+ ioread8(&desc->feature_len) * 2
+		+ ioread8(&desc->config_len);
+}
+
+static inline struct mic_vqconfig __iomem *
+mic_vq_config(struct mic_device_desc __iomem *desc)
+{
+	return (struct mic_vqconfig __iomem *)(desc + 1);
+}
+
+static inline __u8 __iomem *
+mic_vq_features(struct mic_device_desc __iomem *desc)
+{
+	return (__u8 __iomem *)(mic_vq_config(desc) + ioread8(&desc->num_vq));
+}
+
+static inline __u8 __iomem *
+mic_vq_configspace(struct mic_device_desc __iomem *desc)
+{
+	return mic_vq_features(desc) + ioread8(&desc->feature_len) * 2;
+}
+static inline unsigned mic_total_desc_size(struct mic_device_desc __iomem *desc)
+{
+	return mic_aligned_desc_size(desc) +
+		mic_aligned_size(struct mic_device_ctrl);
+}
+
+int mic_devices_init(struct mic_driver *mdrv);
+void mic_devices_uninit(struct mic_driver *mdrv);
+
+#endif
diff --git a/drivers/misc/mic/card/mic_x100.c b/drivers/misc/mic/card/mic_x100.c
new file mode 100644
index 0000000..2868945
--- /dev/null
+++ b/drivers/misc/mic/card/mic_x100.c
@@ -0,0 +1,256 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Disclaimer: The codes contained in these modules may be specific to
+ * the Intel Software Development Platform codenamed: Knights Ferry, and
+ * the Intel product codenamed: Knights Corner, and are not backward
+ * compatible with other Intel products. Additionally, Intel will NOT
+ * support the codes or instruction set in future products.
+ *
+ * Intel MIC Card driver.
+ *
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_x100.h"
+
+static const char mic_driver_name[] = "mic";
+
+static struct mic_driver g_drv;
+
+/**
+ * mic_read_spad - read from the scratchpad register
+ * @mdev: pointer to mic_device instance
+ * @idx: index to scratchpad register, 0 based
+ *
+ * This function allows reading of the 32bit scratchpad register.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+u32 mic_read_spad(struct mic_device *mdev, unsigned int idx)
+{
+	return mic_mmio_read(&mdev->mmio,
+		MIC_X100_SBOX_BASE_ADDRESS +
+		MIC_X100_SBOX_SPAD0 + idx * 4);
+}
+
+/**
+ * __mic_send_intr - Send interrupt to Host.
+ * @mdev: pointer to mic_device instance
+ * @doorbell: Doorbell number.
+ */
+void mic_send_intr(struct mic_device *mdev, int doorbell)
+{
+	struct mic_mw *mw = &mdev->mmio;
+
+	if (doorbell > MIC_X100_MAX_DOORBELL_IDX)
+		return;
+	/* Ensure that the interrupt is ordered w.r.t previous stores. */
+	wmb();
+	mic_mmio_write(mw, MIC_X100_SBOX_SDBIC0_DBREQ_BIT,
+		       MIC_X100_SBOX_BASE_ADDRESS +
+		       (MIC_X100_SBOX_SDBIC0 + (4 * doorbell)));
+}
+
+/**
+ * mic_ack_interrupt - Device specific interrupt handling.
+ * @mdev: pointer to mic_device instance
+ *
+ * Returns: bitmask of doorbell events triggered.
+ */
+u32 mic_ack_interrupt(struct mic_device *mdev)
+{
+	return 0;
+}
+
+static inline int mic_get_sbox_irq(int db)
+{
+	return MIC_X100_IRQ_BASE + db;
+}
+
+static inline int mic_get_rdmasr_irq(int index)
+{
+	return  MIC_X100_RDMASR_IRQ_BASE + index;
+}
+
+/**
+ * mic_hw_intr_init - Initialize h/w specific interrupt
+ * information.
+ * @mdrv: pointer to mic_driver
+ */
+void mic_hw_intr_init(struct mic_driver *mdrv)
+{
+	mdrv->intr_info.num_intr = MIC_X100_NUM_SBOX_IRQ +
+				MIC_X100_NUM_RDMASR_IRQ;
+}
+
+/**
+ * mic_db_to_irq - Retrieve irq number corresponding to a doorbell.
+ * @mdrv: pointer to mic_driver
+ * @db: The doorbell obtained for which the irq is needed. Doorbell
+ * may correspond to an sbox doorbell or an rdmasr index.
+ *
+ * Returns the irq corresponding to the doorbell.
+ */
+int mic_db_to_irq(struct mic_driver *mdrv, int db)
+{
+	int rdmasr_index;
+	if (db < MIC_X100_NUM_SBOX_IRQ) {
+		return mic_get_sbox_irq(db);
+	} else {
+		rdmasr_index = db - MIC_X100_NUM_SBOX_IRQ +
+			MIC_X100_RDMASR_IRQ_BASE;
+		return mic_get_rdmasr_irq(rdmasr_index);
+	}
+}
+
+/*
+ * mic_card_map - Allocate virtual address for a remote memory region.
+ * @mdev: pointer to mic_device instance.
+ * @addr: Remote DMA address.
+ * @size: Size of the region.
+ *
+ * Returns: Virtual address backing the remote memory region.
+ */
+void __iomem *
+mic_card_map(struct mic_device *mdev, dma_addr_t addr, size_t size)
+{
+	return ioremap(addr, size);
+}
+
+/*
+ * mic_card_unmap - Unmap the virtual address for a remote memory region.
+ * @mdev: pointer to mic_device instance.
+ * @addr: Virtual address for remote memory region.
+ *
+ * Returns: None.
+ */
+void mic_card_unmap(struct mic_device *mdev, void __iomem *addr)
+{
+	iounmap(addr);
+}
+
+static int __init mic_probe(struct platform_device *pdev)
+{
+	struct mic_driver *mdrv = &g_drv;
+	struct mic_device *mdev = &mdrv->mdev;
+	int rc = 0;
+
+	mdrv->dev = &pdev->dev;
+	snprintf(mdrv->name, sizeof(mic_driver_name), mic_driver_name);
+
+	mdev->mmio.pa = MIC_X100_MMIO_BASE;
+	mdev->mmio.len = MIC_X100_MMIO_LEN;
+	mdev->mmio.va = ioremap(MIC_X100_MMIO_BASE, MIC_X100_MMIO_LEN);
+	if (!mdev->mmio.va) {
+		dev_err(&pdev->dev, "Cannot remap MMIO BAR\n");
+		rc = -EIO;
+		goto done;
+	}
+	mic_hw_intr_init(mdrv);
+	rc = mic_driver_init(mdrv);
+	if (rc) {
+		dev_err(&pdev->dev, "mic_driver_init failed rc %d\n", rc);
+		goto iounmap;
+	}
+done:
+	return rc;
+iounmap:
+	iounmap(mdev->mmio.va);
+	return rc;
+}
+
+static int mic_remove(struct platform_device *pdev)
+{
+	struct mic_driver *mdrv = &g_drv;
+	struct mic_device *mdev = &mdrv->mdev;
+
+	mic_driver_uninit(mdrv);
+	iounmap(mdev->mmio.va);
+	return 0;
+}
+
+static void mic_platform_shutdown(struct platform_device *pdev)
+{
+	mic_remove(pdev);
+}
+
+static struct platform_device mic_platform_dev = {
+	.name = mic_driver_name,
+	.id   = 0,
+	.num_resources = 0,
+};
+
+static struct platform_driver __refdata mic_platform_driver = {
+	.probe = mic_probe,
+	.remove = mic_remove,
+	.shutdown = mic_platform_shutdown,
+	.driver         = {
+		.name   = mic_driver_name,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init mic_init(void)
+{
+	int ret;
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (!(c->x86 == 11 && c->x86_model == 1)) {
+		ret = -ENODEV;
+		pr_err("%s not running on X100 ret %d\n", __func__, ret);
+		goto done;
+	}
+
+	mic_init_card_debugfs();
+	ret = platform_device_register(&mic_platform_dev);
+	if (ret) {
+		pr_err("platform_device_register ret %d\n", ret);
+		goto cleanup_debugfs;
+	}
+	ret = platform_driver_register(&mic_platform_driver);
+	if (ret) {
+		pr_err("platform_driver_register ret %d\n", ret);
+		goto device_unregister;
+	}
+	return ret;
+
+device_unregister:
+	platform_device_unregister(&mic_platform_dev);
+cleanup_debugfs:
+	mic_exit_card_debugfs();
+done:
+	return ret;
+}
+
+static void __exit mic_exit(void)
+{
+	platform_driver_unregister(&mic_platform_driver);
+	platform_device_unregister(&mic_platform_dev);
+	mic_exit_card_debugfs();
+}
+
+module_init(mic_init);
+module_exit(mic_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) MIC X100 Card driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/mic/card/mic_x100.h b/drivers/misc/mic/card/mic_x100.h
new file mode 100644
index 0000000..d66ea55
--- /dev/null
+++ b/drivers/misc/mic/card/mic_x100.h
@@ -0,0 +1,48 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Disclaimer: The codes contained in these modules may be specific to
+ * the Intel Software Development Platform codenamed: Knights Ferry, and
+ * the Intel product codenamed: Knights Corner, and are not backward
+ * compatible with other Intel products. Additionally, Intel will NOT
+ * support the codes or instruction set in future products.
+ *
+ * Intel MIC Card driver.
+ *
+ */
+#ifndef _MIC_X100_CARD_H_
+#define _MIC_X100_CARD_H_
+
+#define MIC_X100_MMIO_BASE 0x08007C0000ULL
+#define MIC_X100_MMIO_LEN 0x00020000ULL
+#define MIC_X100_SBOX_BASE_ADDRESS 0x00010000ULL
+
+#define MIC_X100_SBOX_SPAD0 0x0000AB20
+#define MIC_X100_SBOX_SDBIC0 0x0000CC90
+#define MIC_X100_SBOX_SDBIC0_DBREQ_BIT 0x80000000
+#define MIC_X100_SBOX_RDMASR0	0x0000B180
+
+#define MIC_X100_MAX_DOORBELL_IDX 8
+
+#define MIC_X100_NUM_SBOX_IRQ 8
+#define MIC_X100_NUM_RDMASR_IRQ 8
+#define MIC_X100_SBOX_IRQ_BASE 0
+#define MIC_X100_RDMASR_IRQ_BASE 17
+
+#define MIC_X100_IRQ_BASE 26
+
+#endif
diff --git a/drivers/misc/mic/common/mic_dev.h b/drivers/misc/mic/common/mic_dev.h
new file mode 100644
index 0000000..92999c2
--- /dev/null
+++ b/drivers/misc/mic/common/mic_dev.h
@@ -0,0 +1,51 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC driver.
+ *
+ */
+#ifndef __MIC_DEV_H__
+#define __MIC_DEV_H__
+
+/**
+ * struct mic_mw - MIC memory window
+ *
+ * @pa: Base physical address.
+ * @va: Base ioremap'd virtual address.
+ * @len: Size of the memory window.
+ */
+struct mic_mw {
+	phys_addr_t pa;
+	void __iomem *va;
+	resource_size_t len;
+};
+
+/*
+ * Scratch pad register offsets used by the host to communicate
+ * device page DMA address to the card.
+ */
+#define MIC_DPLO_SPAD 14
+#define MIC_DPHI_SPAD 15
+
+/*
+ * These values are supposed to be in the config_change field of the
+ * device page when the host sends a config change interrupt to the card.
+ */
+#define MIC_VIRTIO_PARAM_DEV_REMOVE 0x1
+#define MIC_VIRTIO_PARAM_CONFIG_CHANGED 0x2
+
+#endif
diff --git a/drivers/misc/mic/host/Makefile b/drivers/misc/mic/host/Makefile
new file mode 100644
index 0000000..c2197f9
--- /dev/null
+++ b/drivers/misc/mic/host/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile - Intel MIC Linux driver.
+# Copyright(c) 2013, Intel Corporation.
+#
+obj-$(CONFIG_INTEL_MIC_HOST) += mic_host.o
+mic_host-objs := mic_main.o
+mic_host-objs += mic_x100.o
+mic_host-objs += mic_sysfs.o
+mic_host-objs += mic_smpt.o
+mic_host-objs += mic_intr.o
+mic_host-objs += mic_boot.o
+mic_host-objs += mic_debugfs.o
+mic_host-objs += mic_fops.o
+mic_host-objs += mic_virtio.o
diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c
new file mode 100644
index 0000000..b079c65
--- /dev/null
+++ b/drivers/misc/mic/host/mic_boot.c
@@ -0,0 +1,300 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/pci.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_smpt.h"
+#include "mic_virtio.h"
+
+/**
+ * mic_reset - Reset the MIC device.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_reset(struct mic_device *mdev)
+{
+	int i;
+
+#define MIC_RESET_TO (45)
+
+	INIT_COMPLETION(mdev->reset_wait);
+	mdev->ops->reset_fw_ready(mdev);
+	mdev->ops->reset(mdev);
+
+	for (i = 0; i < MIC_RESET_TO; i++) {
+		if (mdev->ops->is_fw_ready(mdev))
+			goto done;
+		/*
+		 * Resets typically take 10s of seconds to complete.
+		 * Since an MMIO read is required to check if the
+		 * firmware is ready or not, a 1 second delay works nicely.
+		 */
+		msleep(1000);
+	}
+	mic_set_state(mdev, MIC_RESET_FAILED);
+done:
+	complete_all(&mdev->reset_wait);
+}
+
+/* Initialize the MIC bootparams */
+void mic_bootparam_init(struct mic_device *mdev)
+{
+	struct mic_bootparam *bootparam = mdev->dp;
+
+	bootparam->magic = MIC_MAGIC;
+	bootparam->c2h_shutdown_db = mdev->shutdown_db;
+	bootparam->h2c_shutdown_db = -1;
+	bootparam->h2c_config_db = -1;
+	bootparam->shutdown_status = 0;
+	bootparam->shutdown_card = 0;
+}
+
+/**
+ * mic_start - Start the MIC.
+ * @mdev: pointer to mic_device instance
+ * @buf: buffer containing boot string including firmware/ramdisk path.
+ *
+ * This function prepares an MIC for boot and initiates boot.
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+int mic_start(struct mic_device *mdev, const char *buf)
+{
+	int rc;
+	mutex_lock(&mdev->mic_mutex);
+retry:
+	if (MIC_OFFLINE != mdev->state) {
+		rc = -EINVAL;
+		goto unlock_ret;
+	}
+	if (!mdev->ops->is_fw_ready(mdev)) {
+		mic_reset(mdev);
+		/*
+		 * The state will either be MIC_OFFLINE if the reset succeeded
+		 * or MIC_RESET_FAILED if the firmware reset failed.
+		 */
+		goto retry;
+	}
+	rc = mdev->ops->load_mic_fw(mdev, buf);
+	if (rc)
+		goto unlock_ret;
+	mic_smpt_restore(mdev);
+	mic_intr_restore(mdev);
+	mdev->intr_ops->enable_interrupts(mdev);
+	mdev->ops->write_spad(mdev, MIC_DPLO_SPAD, mdev->dp_dma_addr);
+	mdev->ops->write_spad(mdev, MIC_DPHI_SPAD, mdev->dp_dma_addr >> 32);
+	mdev->ops->send_firmware_intr(mdev);
+	mic_set_state(mdev, MIC_ONLINE);
+unlock_ret:
+	mutex_unlock(&mdev->mic_mutex);
+	return rc;
+}
+
+/**
+ * mic_stop - Prepare the MIC for reset and trigger reset.
+ * @mdev: pointer to mic_device instance
+ * @force: force a MIC to reset even if it is already offline.
+ *
+ * RETURNS: None.
+ */
+void mic_stop(struct mic_device *mdev, bool force)
+{
+	mutex_lock(&mdev->mic_mutex);
+	if (MIC_OFFLINE != mdev->state || force) {
+		mic_virtio_reset_devices(mdev);
+		mic_bootparam_init(mdev);
+		mic_reset(mdev);
+		if (MIC_RESET_FAILED == mdev->state)
+			goto unlock;
+		mic_set_shutdown_status(mdev, MIC_NOP);
+		if (MIC_SUSPENDED != mdev->state)
+			mic_set_state(mdev, MIC_OFFLINE);
+	}
+unlock:
+	mutex_unlock(&mdev->mic_mutex);
+}
+
+/**
+ * mic_shutdown - Initiate MIC shutdown.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: None.
+ */
+void mic_shutdown(struct mic_device *mdev)
+{
+	struct mic_bootparam *bootparam = mdev->dp;
+	s8 db = bootparam->h2c_shutdown_db;
+
+	mutex_lock(&mdev->mic_mutex);
+	if (MIC_ONLINE == mdev->state && db != -1) {
+		bootparam->shutdown_card = 1;
+		mdev->ops->send_intr(mdev, db);
+		mic_set_state(mdev, MIC_SHUTTING_DOWN);
+	}
+	mutex_unlock(&mdev->mic_mutex);
+}
+
+/**
+ * mic_shutdown_work - Handle shutdown interrupt from MIC.
+ * @work: The work structure.
+ *
+ * This work is scheduled whenever the host has received a shutdown
+ * interrupt from the MIC.
+ */
+void mic_shutdown_work(struct work_struct *work)
+{
+	struct mic_device *mdev = container_of(work, struct mic_device,
+			shutdown_work);
+	struct mic_bootparam *bootparam = mdev->dp;
+
+	mutex_lock(&mdev->mic_mutex);
+	mic_set_shutdown_status(mdev, bootparam->shutdown_status);
+	bootparam->shutdown_status = 0;
+
+	/*
+	 * if state is MIC_SUSPENDED, OSPM suspend is in progress. We do not
+	 * change the state here so as to prevent users from booting the card
+	 * during and after the suspend operation.
+	 */
+	if (MIC_SHUTTING_DOWN != mdev->state &&
+	    MIC_SUSPENDED != mdev->state)
+		mic_set_state(mdev, MIC_SHUTTING_DOWN);
+	mutex_unlock(&mdev->mic_mutex);
+}
+
+/**
+ * mic_reset_trigger_work - Trigger MIC reset.
+ * @work: The work structure.
+ *
+ * This work is scheduled whenever the host wants to reset the MIC.
+ */
+void mic_reset_trigger_work(struct work_struct *work)
+{
+	struct mic_device *mdev = container_of(work, struct mic_device,
+			reset_trigger_work);
+
+	mic_stop(mdev, false);
+}
+
+/**
+ * mic_complete_resume - Complete MIC Resume after an OSPM suspend/hibernate
+ * event.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: None.
+ */
+void mic_complete_resume(struct mic_device *mdev)
+{
+	if (mdev->state != MIC_SUSPENDED) {
+		dev_warn(mdev->sdev->parent, "state %d should be %d\n",
+			 mdev->state, MIC_SUSPENDED);
+		return;
+	}
+
+	/* Make sure firmware is ready */
+	if (!mdev->ops->is_fw_ready(mdev))
+		mic_stop(mdev, true);
+
+	mutex_lock(&mdev->mic_mutex);
+	mic_set_state(mdev, MIC_OFFLINE);
+	mutex_unlock(&mdev->mic_mutex);
+}
+
+/**
+ * mic_prepare_suspend - Handle suspend notification for the MIC device.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: None.
+ */
+void mic_prepare_suspend(struct mic_device *mdev)
+{
+	int rc;
+
+#define MIC_SUSPEND_TIMEOUT (60 * HZ)
+
+	mutex_lock(&mdev->mic_mutex);
+	switch (mdev->state) {
+	case MIC_OFFLINE:
+		/*
+		 * Card is already offline. Set state to MIC_SUSPENDED
+		 * to prevent users from booting the card.
+		 */
+		mic_set_state(mdev, MIC_SUSPENDED);
+		mutex_unlock(&mdev->mic_mutex);
+		break;
+	case MIC_ONLINE:
+		/*
+		 * Card is online. Set state to MIC_SUSPENDING and notify
+		 * MIC user space daemon which will issue card
+		 * shutdown and reset.
+		 */
+		mic_set_state(mdev, MIC_SUSPENDING);
+		mutex_unlock(&mdev->mic_mutex);
+		rc = wait_for_completion_timeout(&mdev->reset_wait,
+						MIC_SUSPEND_TIMEOUT);
+		/* Force reset the card if the shutdown completion timed out */
+		if (!rc) {
+			mutex_lock(&mdev->mic_mutex);
+			mic_set_state(mdev, MIC_SUSPENDED);
+			mutex_unlock(&mdev->mic_mutex);
+			mic_stop(mdev, true);
+		}
+		break;
+	case MIC_SHUTTING_DOWN:
+		/*
+		 * Card is shutting down. Set state to MIC_SUSPENDED
+		 * to prevent further boot of the card.
+		 */
+		mic_set_state(mdev, MIC_SUSPENDED);
+		mutex_unlock(&mdev->mic_mutex);
+		rc = wait_for_completion_timeout(&mdev->reset_wait,
+						MIC_SUSPEND_TIMEOUT);
+		/* Force reset the card if the shutdown completion timed out */
+		if (!rc)
+			mic_stop(mdev, true);
+		break;
+	default:
+		mutex_unlock(&mdev->mic_mutex);
+		break;
+	}
+}
+
+/**
+ * mic_suspend - Initiate MIC suspend. Suspend merely issues card shutdown.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: None.
+ */
+void mic_suspend(struct mic_device *mdev)
+{
+	struct mic_bootparam *bootparam = mdev->dp;
+	s8 db = bootparam->h2c_shutdown_db;
+
+	mutex_lock(&mdev->mic_mutex);
+	if (MIC_SUSPENDING == mdev->state && db != -1) {
+		bootparam->shutdown_card = 1;
+		mdev->ops->send_intr(mdev, db);
+		mic_set_state(mdev, MIC_SUSPENDED);
+	}
+	mutex_unlock(&mdev->mic_mutex);
+}
diff --git a/drivers/misc/mic/host/mic_debugfs.c b/drivers/misc/mic/host/mic_debugfs.c
new file mode 100644
index 0000000..028ba5d6
--- /dev/null
+++ b/drivers/misc/mic/host/mic_debugfs.c
@@ -0,0 +1,491 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/debugfs.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_smpt.h"
+#include "mic_virtio.h"
+
+/* Debugfs parent dir */
+static struct dentry *mic_dbg;
+
+/**
+ * mic_log_buf_show - Display MIC kernel log buffer.
+ *
+ * log_buf addr/len is read from System.map by user space
+ * and populated in sysfs entries.
+ */
+static int mic_log_buf_show(struct seq_file *s, void *unused)
+{
+	void __iomem *log_buf_va;
+	int __iomem *log_buf_len_va;
+	struct mic_device *mdev = s->private;
+	void *kva;
+	int size;
+	unsigned long aper_offset;
+
+	if (!mdev || !mdev->log_buf_addr || !mdev->log_buf_len)
+		goto done;
+	/*
+	 * Card kernel will never be relocated and any kernel text/data mapping
+	 * can be translated to phys address by subtracting __START_KERNEL_map.
+	 */
+	aper_offset = (unsigned long)mdev->log_buf_len - __START_KERNEL_map;
+	log_buf_len_va = mdev->aper.va + aper_offset;
+	aper_offset = (unsigned long)mdev->log_buf_addr - __START_KERNEL_map;
+	log_buf_va = mdev->aper.va + aper_offset;
+	size = ioread32(log_buf_len_va);
+
+	kva = kmalloc(size, GFP_KERNEL);
+	if (!kva)
+		goto done;
+	mutex_lock(&mdev->mic_mutex);
+	memcpy_fromio(kva, log_buf_va, size);
+	switch (mdev->state) {
+	case MIC_ONLINE:
+		/* Fall through */
+	case MIC_SHUTTING_DOWN:
+		seq_write(s, kva, size);
+		break;
+	default:
+		break;
+	}
+	mutex_unlock(&mdev->mic_mutex);
+	kfree(kva);
+done:
+	return 0;
+}
+
+static int mic_log_buf_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_log_buf_show, inode->i_private);
+}
+
+static int mic_log_buf_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations log_buf_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_log_buf_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_log_buf_release
+};
+
+static int mic_smpt_show(struct seq_file *s, void *pos)
+{
+	int i;
+	struct mic_device *mdev = s->private;
+	unsigned long flags;
+
+	seq_printf(s, "MIC %-2d |%-10s| %-14s %-10s\n",
+		   mdev->id, "SMPT entry", "SW DMA addr", "RefCount");
+	seq_puts(s, "====================================================\n");
+
+	if (mdev->smpt) {
+		struct mic_smpt_info *smpt_info = mdev->smpt;
+		spin_lock_irqsave(&smpt_info->smpt_lock, flags);
+		for (i = 0; i < smpt_info->info.num_reg; i++) {
+			seq_printf(s, "%9s|%-10d| %-#14llx %-10lld\n",
+				   " ",  i, smpt_info->entry[i].dma_addr,
+				   smpt_info->entry[i].ref_count);
+		}
+		spin_unlock_irqrestore(&smpt_info->smpt_lock, flags);
+	}
+	seq_puts(s, "====================================================\n");
+	return 0;
+}
+
+static int mic_smpt_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_smpt_show, inode->i_private);
+}
+
+static int mic_smpt_debug_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations smpt_file_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_smpt_debug_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_smpt_debug_release
+};
+
+static int mic_soft_reset_show(struct seq_file *s, void *pos)
+{
+	struct mic_device *mdev = s->private;
+
+	mic_stop(mdev, true);
+	return 0;
+}
+
+static int mic_soft_reset_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_soft_reset_show, inode->i_private);
+}
+
+static int mic_soft_reset_debug_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations soft_reset_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_soft_reset_debug_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_soft_reset_debug_release
+};
+
+static int mic_post_code_show(struct seq_file *s, void *pos)
+{
+	struct mic_device *mdev = s->private;
+	u32 reg = mdev->ops->get_postcode(mdev);
+
+	seq_printf(s, "%c%c", reg & 0xff, (reg >> 8) & 0xff);
+	return 0;
+}
+
+static int mic_post_code_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_post_code_show, inode->i_private);
+}
+
+static int mic_post_code_debug_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations post_code_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_post_code_debug_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_post_code_debug_release
+};
+
+static int mic_dp_show(struct seq_file *s, void *pos)
+{
+	struct mic_device *mdev = s->private;
+	struct mic_device_desc *d;
+	struct mic_device_ctrl *dc;
+	struct mic_vqconfig *vqconfig;
+	__u32 *features;
+	__u8 *config;
+	struct mic_bootparam *bootparam = mdev->dp;
+	int i, j;
+
+	seq_printf(s, "Bootparam: magic 0x%x\n",
+		   bootparam->magic);
+	seq_printf(s, "Bootparam: h2c_shutdown_db %d\n",
+		   bootparam->h2c_shutdown_db);
+	seq_printf(s, "Bootparam: h2c_config_db %d\n",
+		   bootparam->h2c_config_db);
+	seq_printf(s, "Bootparam: c2h_shutdown_db %d\n",
+		   bootparam->c2h_shutdown_db);
+	seq_printf(s, "Bootparam: shutdown_status %d\n",
+		   bootparam->shutdown_status);
+	seq_printf(s, "Bootparam: shutdown_card %d\n",
+		   bootparam->shutdown_card);
+
+	for (i = sizeof(*bootparam); i < MIC_DP_SIZE;
+	     i += mic_total_desc_size(d)) {
+		d = mdev->dp + i;
+		dc = (void *)d + mic_aligned_desc_size(d);
+
+		/* end of list */
+		if (d->type == 0)
+			break;
+
+		if (d->type == -1)
+			continue;
+
+		seq_printf(s, "Type %d ", d->type);
+		seq_printf(s, "Num VQ %d ", d->num_vq);
+		seq_printf(s, "Feature Len %d\n", d->feature_len);
+		seq_printf(s, "Config Len %d ", d->config_len);
+		seq_printf(s, "Shutdown Status %d\n", d->status);
+
+		for (j = 0; j < d->num_vq; j++) {
+			vqconfig = mic_vq_config(d) + j;
+			seq_printf(s, "vqconfig[%d]: ", j);
+			seq_printf(s, "address 0x%llx ", vqconfig->address);
+			seq_printf(s, "num %d ", vqconfig->num);
+			seq_printf(s, "used address 0x%llx\n",
+				   vqconfig->used_address);
+		}
+
+		features = (__u32 *)mic_vq_features(d);
+		seq_printf(s, "Features: Host 0x%x ", features[0]);
+		seq_printf(s, "Guest 0x%x\n", features[1]);
+
+		config = mic_vq_configspace(d);
+		for (j = 0; j < d->config_len; j++)
+			seq_printf(s, "config[%d]=%d\n", j, config[j]);
+
+		seq_puts(s, "Device control:\n");
+		seq_printf(s, "Config Change %d ", dc->config_change);
+		seq_printf(s, "Vdev reset %d\n", dc->vdev_reset);
+		seq_printf(s, "Guest Ack %d ", dc->guest_ack);
+		seq_printf(s, "Host ack %d\n", dc->host_ack);
+		seq_printf(s, "Used address updated %d ",
+			   dc->used_address_updated);
+		seq_printf(s, "Vdev 0x%llx\n", dc->vdev);
+		seq_printf(s, "c2h doorbell %d ", dc->c2h_vdev_db);
+		seq_printf(s, "h2c doorbell %d\n", dc->h2c_vdev_db);
+	}
+
+	return 0;
+}
+
+static int mic_dp_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_dp_show, inode->i_private);
+}
+
+static int mic_dp_debug_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations dp_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_dp_debug_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_dp_debug_release
+};
+
+static int mic_vdev_info_show(struct seq_file *s, void *unused)
+{
+	struct mic_device *mdev = s->private;
+	struct list_head *pos, *tmp;
+	struct mic_vdev *mvdev;
+	int i, j;
+
+	mutex_lock(&mdev->mic_mutex);
+	list_for_each_safe(pos, tmp, &mdev->vdev_list) {
+		mvdev = list_entry(pos, struct mic_vdev, list);
+		seq_printf(s, "VDEV type %d state %s in %ld out %ld\n",
+			   mvdev->virtio_id,
+			   mic_vdevup(mvdev) ? "UP" : "DOWN",
+			   mvdev->in_bytes,
+			   mvdev->out_bytes);
+		for (i = 0; i < MIC_MAX_VRINGS; i++) {
+			struct vring_desc *desc;
+			struct vring_avail *avail;
+			struct vring_used *used;
+			struct mic_vringh *mvr = &mvdev->mvr[i];
+			struct vringh *vrh = &mvr->vrh;
+			int num = vrh->vring.num;
+			if (!num)
+				continue;
+			desc = vrh->vring.desc;
+			seq_printf(s, "vring i %d avail_idx %d",
+				   i, mvr->vring.info->avail_idx & (num - 1));
+			seq_printf(s, " vring i %d avail_idx %d\n",
+				   i, mvr->vring.info->avail_idx);
+			seq_printf(s, "vrh i %d weak_barriers %d",
+				   i, vrh->weak_barriers);
+			seq_printf(s, " last_avail_idx %d last_used_idx %d",
+				   vrh->last_avail_idx, vrh->last_used_idx);
+			seq_printf(s, " completed %d\n", vrh->completed);
+			for (j = 0; j < num; j++) {
+				seq_printf(s, "desc[%d] addr 0x%llx len %d",
+					   j, desc->addr, desc->len);
+				seq_printf(s, " flags 0x%x next %d\n",
+					   desc->flags, desc->next);
+				desc++;
+			}
+			avail = vrh->vring.avail;
+			seq_printf(s, "avail flags 0x%x idx %d\n",
+				   avail->flags, avail->idx & (num - 1));
+			seq_printf(s, "avail flags 0x%x idx %d\n",
+				   avail->flags, avail->idx);
+			for (j = 0; j < num; j++)
+				seq_printf(s, "avail ring[%d] %d\n",
+					   j, avail->ring[j]);
+			used = vrh->vring.used;
+			seq_printf(s, "used flags 0x%x idx %d\n",
+				   used->flags, used->idx & (num - 1));
+			seq_printf(s, "used flags 0x%x idx %d\n",
+				   used->flags, used->idx);
+			for (j = 0; j < num; j++)
+				seq_printf(s, "used ring[%d] id %d len %d\n",
+					   j, used->ring[j].id,
+					   used->ring[j].len);
+		}
+	}
+	mutex_unlock(&mdev->mic_mutex);
+
+	return 0;
+}
+
+static int mic_vdev_info_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_vdev_info_show, inode->i_private);
+}
+
+static int mic_vdev_info_debug_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations vdev_info_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_vdev_info_debug_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_vdev_info_debug_release
+};
+
+static int mic_msi_irq_info_show(struct seq_file *s, void *pos)
+{
+	struct mic_device *mdev  = s->private;
+	int reg;
+	int i, j;
+	u16 entry;
+	u16 vector;
+	struct pci_dev *pdev = container_of(mdev->sdev->parent,
+		struct pci_dev, dev);
+
+	if (pci_dev_msi_enabled(pdev)) {
+		for (i = 0; i < mdev->irq_info.num_vectors; i++) {
+			if (pdev->msix_enabled) {
+				entry = mdev->irq_info.msix_entries[i].entry;
+				vector = mdev->irq_info.msix_entries[i].vector;
+			} else {
+				entry = 0;
+				vector = pdev->irq;
+			}
+
+			reg = mdev->intr_ops->read_msi_to_src_map(mdev, entry);
+
+			seq_printf(s, "%s %-10d %s %-10d MXAR[%d]: %08X\n",
+				   "IRQ:", vector, "Entry:", entry, i, reg);
+
+			seq_printf(s, "%-10s", "offset:");
+			for (j = (MIC_NUM_OFFSETS - 1); j >= 0; j--)
+				seq_printf(s, "%4d ", j);
+			seq_puts(s, "\n");
+
+
+			seq_printf(s, "%-10s", "count:");
+			for (j = (MIC_NUM_OFFSETS - 1); j >= 0; j--)
+				seq_printf(s, "%4d ",
+					   (mdev->irq_info.mic_msi_map[i] &
+					   BIT(j)) ? 1 : 0);
+			seq_puts(s, "\n\n");
+		}
+	} else {
+		seq_puts(s, "MSI/MSIx interrupts not enabled\n");
+	}
+
+	return 0;
+}
+
+static int mic_msi_irq_info_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mic_msi_irq_info_show, inode->i_private);
+}
+
+static int
+mic_msi_irq_info_debug_release(struct inode *inode, struct file *file)
+{
+	return single_release(inode, file);
+}
+
+static const struct file_operations msi_irq_info_ops = {
+	.owner   = THIS_MODULE,
+	.open    = mic_msi_irq_info_debug_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = mic_msi_irq_info_debug_release
+};
+
+/**
+ * mic_create_debug_dir - Initialize MIC debugfs entries.
+ */
+void mic_create_debug_dir(struct mic_device *mdev)
+{
+	if (!mic_dbg)
+		return;
+
+	mdev->dbg_dir = debugfs_create_dir(dev_name(mdev->sdev), mic_dbg);
+	if (!mdev->dbg_dir)
+		return;
+
+	debugfs_create_file("log_buf", 0444, mdev->dbg_dir, mdev, &log_buf_ops);
+
+	debugfs_create_file("smpt", 0444, mdev->dbg_dir, mdev, &smpt_file_ops);
+
+	debugfs_create_file("soft_reset", 0444, mdev->dbg_dir, mdev,
+			    &soft_reset_ops);
+
+	debugfs_create_file("post_code", 0444, mdev->dbg_dir, mdev,
+			    &post_code_ops);
+
+	debugfs_create_file("dp", 0444, mdev->dbg_dir, mdev, &dp_ops);
+
+	debugfs_create_file("vdev_info", 0444, mdev->dbg_dir, mdev,
+			    &vdev_info_ops);
+
+	debugfs_create_file("msi_irq_info", 0444, mdev->dbg_dir, mdev,
+			    &msi_irq_info_ops);
+}
+
+/**
+ * mic_delete_debug_dir - Uninitialize MIC debugfs entries.
+ */
+void mic_delete_debug_dir(struct mic_device *mdev)
+{
+	if (!mdev->dbg_dir)
+		return;
+
+	debugfs_remove_recursive(mdev->dbg_dir);
+}
+
+/**
+ * mic_init_debugfs - Initialize global debugfs entry.
+ */
+void __init mic_init_debugfs(void)
+{
+	mic_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	if (!mic_dbg)
+		pr_err("can't create debugfs dir\n");
+}
+
+/**
+ * mic_exit_debugfs - Uninitialize global debugfs entry
+ */
+void mic_exit_debugfs(void)
+{
+	debugfs_remove(mic_dbg);
+}
diff --git a/drivers/misc/mic/host/mic_device.h b/drivers/misc/mic/host/mic_device.h
new file mode 100644
index 0000000..3574cc3
--- /dev/null
+++ b/drivers/misc/mic/host/mic_device.h
@@ -0,0 +1,203 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#ifndef _MIC_DEVICE_H_
+#define _MIC_DEVICE_H_
+
+#include <linux/cdev.h>
+#include <linux/idr.h>
+#include <linux/notifier.h>
+
+#include "mic_intr.h"
+
+/* The maximum number of MIC devices supported in a single host system. */
+#define MIC_MAX_NUM_DEVS 256
+
+/**
+ * enum mic_hw_family - The hardware family to which a device belongs.
+ */
+enum mic_hw_family {
+	MIC_FAMILY_X100 = 0,
+	MIC_FAMILY_UNKNOWN
+};
+
+/**
+ * enum mic_stepping - MIC stepping ids.
+ */
+enum mic_stepping {
+	MIC_A0_STEP = 0x0,
+	MIC_B0_STEP = 0x10,
+	MIC_B1_STEP = 0x11,
+	MIC_C0_STEP = 0x20,
+};
+
+/**
+ * struct mic_device -  MIC device information for each card.
+ *
+ * @mmio: MMIO bar information.
+ * @aper: Aperture bar information.
+ * @family: The MIC family to which this device belongs.
+ * @ops: MIC HW specific operations.
+ * @id: The unique device id for this MIC device.
+ * @stepping: Stepping ID.
+ * @attr_group: Pointer to list of sysfs attribute groups.
+ * @sdev: Device for sysfs entries.
+ * @mic_mutex: Mutex for synchronizing access to mic_device.
+ * @intr_ops: HW specific interrupt operations.
+ * @smpt_ops: Hardware specific SMPT operations.
+ * @smpt: MIC SMPT information.
+ * @intr_info: H/W specific interrupt information.
+ * @irq_info: The OS specific irq information
+ * @dbg_dir: debugfs directory of this MIC device.
+ * @cmdline: Kernel command line.
+ * @firmware: Firmware file name.
+ * @ramdisk: Ramdisk file name.
+ * @bootmode: Boot mode i.e. "linux" or "elf" for flash updates.
+ * @bootaddr: MIC boot address.
+ * @reset_trigger_work: Work for triggering reset requests.
+ * @shutdown_work: Work for handling shutdown interrupts.
+ * @state: MIC state.
+ * @shutdown_status: MIC status reported by card for shutdown/crashes.
+ * @state_sysfs: Sysfs dirent for notifying ring 3 about MIC state changes.
+ * @reset_wait: Waitqueue for sleeping while reset completes.
+ * @log_buf_addr: Log buffer address for MIC.
+ * @log_buf_len: Log buffer length address for MIC.
+ * @dp: virtio device page
+ * @dp_dma_addr: virtio device page DMA address.
+ * @shutdown_db: shutdown doorbell.
+ * @shutdown_cookie: shutdown cookie.
+ * @cdev: Character device for MIC.
+ * @vdev_list: list of virtio devices.
+ * @pm_notifier: Handles PM notifications from the OS.
+ */
+struct mic_device {
+	struct mic_mw mmio;
+	struct mic_mw aper;
+	enum mic_hw_family family;
+	struct mic_hw_ops *ops;
+	int id;
+	enum mic_stepping stepping;
+	const struct attribute_group **attr_group;
+	struct device *sdev;
+	struct mutex mic_mutex;
+	struct mic_hw_intr_ops *intr_ops;
+	struct mic_smpt_ops *smpt_ops;
+	struct mic_smpt_info *smpt;
+	struct mic_intr_info *intr_info;
+	struct mic_irq_info irq_info;
+	struct dentry *dbg_dir;
+	char *cmdline;
+	char *firmware;
+	char *ramdisk;
+	char *bootmode;
+	u32 bootaddr;
+	struct work_struct reset_trigger_work;
+	struct work_struct shutdown_work;
+	u8 state;
+	u8 shutdown_status;
+	struct sysfs_dirent *state_sysfs;
+	struct completion reset_wait;
+	void *log_buf_addr;
+	int *log_buf_len;
+	void *dp;
+	dma_addr_t dp_dma_addr;
+	int shutdown_db;
+	struct mic_irq *shutdown_cookie;
+	struct cdev cdev;
+	struct list_head vdev_list;
+	struct notifier_block pm_notifier;
+};
+
+/**
+ * struct mic_hw_ops - MIC HW specific operations.
+ * @aper_bar: Aperture bar resource number.
+ * @mmio_bar: MMIO bar resource number.
+ * @read_spad: Read from scratch pad register.
+ * @write_spad: Write to scratch pad register.
+ * @send_intr: Send an interrupt for a particular doorbell on the card.
+ * @ack_interrupt: Hardware specific operations to ack the h/w on
+ * receipt of an interrupt.
+ * @reset: Reset the remote processor.
+ * @reset_fw_ready: Reset firmware ready field.
+ * @is_fw_ready: Check if firmware is ready for OS download.
+ * @send_firmware_intr: Send an interrupt to the card firmware.
+ * @load_mic_fw: Load firmware segments required to boot the card
+ * into card memory. This includes the kernel, command line, ramdisk etc.
+ * @get_postcode: Get post code status from firmware.
+ */
+struct mic_hw_ops {
+	u8 aper_bar;
+	u8 mmio_bar;
+	u32 (*read_spad)(struct mic_device *mdev, unsigned int idx);
+	void (*write_spad)(struct mic_device *mdev, unsigned int idx, u32 val);
+	void (*send_intr)(struct mic_device *mdev, int doorbell);
+	u32 (*ack_interrupt)(struct mic_device *mdev);
+	void (*reset)(struct mic_device *mdev);
+	void (*reset_fw_ready)(struct mic_device *mdev);
+	bool (*is_fw_ready)(struct mic_device *mdev);
+	void (*send_firmware_intr)(struct mic_device *mdev);
+	int (*load_mic_fw)(struct mic_device *mdev, const char *buf);
+	u32 (*get_postcode)(struct mic_device *mdev);
+};
+
+/**
+ * mic_mmio_read - read from an MMIO register.
+ * @mw: MMIO register base virtual address.
+ * @offset: register offset.
+ *
+ * RETURNS: register value.
+ */
+static inline u32 mic_mmio_read(struct mic_mw *mw, u32 offset)
+{
+	return ioread32(mw->va + offset);
+}
+
+/**
+ * mic_mmio_write - write to an MMIO register.
+ * @mw: MMIO register base virtual address.
+ * @val: the data value to put into the register
+ * @offset: register offset.
+ *
+ * RETURNS: none.
+ */
+static inline void
+mic_mmio_write(struct mic_mw *mw, u32 val, u32 offset)
+{
+	iowrite32(val, mw->va + offset);
+}
+
+void mic_sysfs_init(struct mic_device *mdev);
+int mic_start(struct mic_device *mdev, const char *buf);
+void mic_stop(struct mic_device *mdev, bool force);
+void mic_shutdown(struct mic_device *mdev);
+void mic_reset_delayed_work(struct work_struct *work);
+void mic_reset_trigger_work(struct work_struct *work);
+void mic_shutdown_work(struct work_struct *work);
+void mic_bootparam_init(struct mic_device *mdev);
+void mic_set_state(struct mic_device *mdev, u8 state);
+void mic_set_shutdown_status(struct mic_device *mdev, u8 status);
+void mic_create_debug_dir(struct mic_device *dev);
+void mic_delete_debug_dir(struct mic_device *dev);
+void __init mic_init_debugfs(void);
+void mic_exit_debugfs(void);
+void mic_prepare_suspend(struct mic_device *mdev);
+void mic_complete_resume(struct mic_device *mdev);
+void mic_suspend(struct mic_device *mdev);
+#endif
diff --git a/drivers/misc/mic/host/mic_fops.c b/drivers/misc/mic/host/mic_fops.c
new file mode 100644
index 0000000..85776d7
--- /dev/null
+++ b/drivers/misc/mic/host/mic_fops.c
@@ -0,0 +1,222 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/poll.h>
+#include <linux/pci.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_fops.h"
+#include "mic_virtio.h"
+
+int mic_open(struct inode *inode, struct file *f)
+{
+	struct mic_vdev *mvdev;
+	struct mic_device *mdev = container_of(inode->i_cdev,
+		struct mic_device, cdev);
+
+	mvdev = kzalloc(sizeof(*mvdev), GFP_KERNEL);
+	if (!mvdev)
+		return -ENOMEM;
+
+	init_waitqueue_head(&mvdev->waitq);
+	INIT_LIST_HEAD(&mvdev->list);
+	mvdev->mdev = mdev;
+	mvdev->virtio_id = -1;
+
+	f->private_data = mvdev;
+	return 0;
+}
+
+int mic_release(struct inode *inode, struct file *f)
+{
+	struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data;
+
+	if (-1 != mvdev->virtio_id)
+		mic_virtio_del_device(mvdev);
+	f->private_data = NULL;
+	kfree(mvdev);
+	return 0;
+}
+
+long mic_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+{
+	struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data;
+	void __user *argp = (void __user *)arg;
+	int ret;
+
+	switch (cmd) {
+	case MIC_VIRTIO_ADD_DEVICE:
+	{
+		ret = mic_virtio_add_device(mvdev, argp);
+		if (ret < 0) {
+			dev_err(mic_dev(mvdev),
+				"%s %d errno ret %d\n",
+				__func__, __LINE__, ret);
+			return ret;
+		}
+		break;
+	}
+	case MIC_VIRTIO_COPY_DESC:
+	{
+		struct mic_copy_desc copy;
+
+		ret = mic_vdev_inited(mvdev);
+		if (ret)
+			return ret;
+
+		if (copy_from_user(&copy, argp, sizeof(copy)))
+			return -EFAULT;
+
+		dev_dbg(mic_dev(mvdev),
+			"%s %d === iovcnt 0x%x vr_idx 0x%x update_used %d\n",
+			__func__, __LINE__, copy.iovcnt, copy.vr_idx,
+			copy.update_used);
+
+		ret = mic_virtio_copy_desc(mvdev, &copy);
+		if (ret < 0) {
+			dev_err(mic_dev(mvdev),
+				"%s %d errno ret %d\n",
+				__func__, __LINE__, ret);
+			return ret;
+		}
+		if (copy_to_user(
+			&((struct mic_copy_desc __user *)argp)->out_len,
+			&copy.out_len, sizeof(copy.out_len))) {
+			dev_err(mic_dev(mvdev), "%s %d errno ret %d\n",
+				__func__, __LINE__, -EFAULT);
+			return -EFAULT;
+		}
+		break;
+	}
+	case MIC_VIRTIO_CONFIG_CHANGE:
+	{
+		ret = mic_vdev_inited(mvdev);
+		if (ret)
+			return ret;
+
+		ret = mic_virtio_config_change(mvdev, argp);
+		if (ret < 0) {
+			dev_err(mic_dev(mvdev),
+				"%s %d errno ret %d\n",
+				__func__, __LINE__, ret);
+			return ret;
+		}
+		break;
+	}
+	default:
+		return -ENOIOCTLCMD;
+	};
+	return 0;
+}
+
+/*
+ * We return POLLIN | POLLOUT from poll when new buffers are enqueued, and
+ * not when previously enqueued buffers may be available. This means that
+ * in the card->host (TX) path, when userspace is unblocked by poll it
+ * must drain all available descriptors or it can stall.
+ */
+unsigned int mic_poll(struct file *f, poll_table *wait)
+{
+	struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data;
+	int mask = 0;
+
+	poll_wait(f, &mvdev->waitq, wait);
+
+	if (mic_vdev_inited(mvdev)) {
+		mask = POLLERR;
+	} else if (mvdev->poll_wake) {
+		mvdev->poll_wake = 0;
+		mask = POLLIN | POLLOUT;
+	}
+
+	return mask;
+}
+
+static inline int
+mic_query_offset(struct mic_vdev *mvdev, unsigned long offset,
+		 unsigned long *size, unsigned long *pa)
+{
+	struct mic_device *mdev = mvdev->mdev;
+	unsigned long start = MIC_DP_SIZE;
+	int i;
+
+	/*
+	 * MMAP interface is as follows:
+	 * offset				region
+	 * 0x0					virtio device_page
+	 * 0x1000				first vring
+	 * 0x1000 + size of 1st vring		second vring
+	 * ....
+	 */
+	if (!offset) {
+		*pa = virt_to_phys(mdev->dp);
+		*size = MIC_DP_SIZE;
+		return 0;
+	}
+
+	for (i = 0; i < mvdev->dd->num_vq; i++) {
+		struct mic_vringh *mvr = &mvdev->mvr[i];
+		if (offset == start) {
+			*pa = virt_to_phys(mvr->vring.va);
+			*size = mvr->vring.len;
+			return 0;
+		}
+		start += mvr->vring.len;
+	}
+	return -1;
+}
+
+/*
+ * Maps the device page and virtio rings to user space for readonly access.
+ */
+int
+mic_mmap(struct file *f, struct vm_area_struct *vma)
+{
+	struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long pa, size = vma->vm_end - vma->vm_start, size_rem = size;
+	int i, err;
+
+	err = mic_vdev_inited(mvdev);
+	if (err)
+		return err;
+
+	if (vma->vm_flags & VM_WRITE)
+		return -EACCES;
+
+	while (size_rem) {
+		i = mic_query_offset(mvdev, offset, &size, &pa);
+		if (i < 0)
+			return -EINVAL;
+		err = remap_pfn_range(vma, vma->vm_start + offset,
+			pa >> PAGE_SHIFT, size, vma->vm_page_prot);
+		if (err)
+			return err;
+		dev_dbg(mic_dev(mvdev),
+			"%s %d type %d size 0x%lx off 0x%lx pa 0x%lx vma 0x%lx\n",
+			__func__, __LINE__, mvdev->virtio_id, size, offset,
+			pa, vma->vm_start + offset);
+		size_rem -= size;
+		offset += size;
+	}
+	return 0;
+}
diff --git a/drivers/misc/mic/host/mic_fops.h b/drivers/misc/mic/host/mic_fops.h
new file mode 100644
index 0000000..dc3893d
--- /dev/null
+++ b/drivers/misc/mic/host/mic_fops.h
@@ -0,0 +1,32 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#ifndef _MIC_FOPS_H_
+#define _MIC_FOPS_H_
+
+int mic_open(struct inode *inode, struct file *filp);
+int mic_release(struct inode *inode, struct file *filp);
+ssize_t mic_read(struct file *filp, char __user *buf,
+			size_t count, loff_t *pos);
+long mic_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
+int mic_mmap(struct file *f, struct vm_area_struct *vma);
+unsigned int mic_poll(struct file *f, poll_table *wait);
+
+#endif
diff --git a/drivers/misc/mic/host/mic_intr.c b/drivers/misc/mic/host/mic_intr.c
new file mode 100644
index 0000000..f9c29bc
--- /dev/null
+++ b/drivers/misc/mic/host/mic_intr.c
@@ -0,0 +1,630 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+
+/*
+ * mic_invoke_callback - Invoke callback functions registered for
+ * the corresponding source id.
+ *
+ * @mdev: pointer to the mic_device instance
+ * @idx: The interrupt source id.
+ *
+ * Returns none.
+ */
+static inline void mic_invoke_callback(struct mic_device *mdev, int idx)
+{
+	struct mic_intr_cb *intr_cb;
+	struct pci_dev *pdev = container_of(mdev->sdev->parent,
+		struct pci_dev, dev);
+
+	spin_lock(&mdev->irq_info.mic_intr_lock);
+	list_for_each_entry(intr_cb, &mdev->irq_info.cb_list[idx], list)
+		if (intr_cb->func)
+			intr_cb->func(pdev->irq, intr_cb->data);
+	spin_unlock(&mdev->irq_info.mic_intr_lock);
+}
+
+/**
+ * mic_interrupt - Generic interrupt handler for
+ * MSI and INTx based interrupts.
+ */
+static irqreturn_t mic_interrupt(int irq, void *dev)
+{
+	struct mic_device *mdev = dev;
+	struct mic_intr_info *info = mdev->intr_info;
+	u32 mask;
+	int i;
+
+	mask = mdev->ops->ack_interrupt(mdev);
+	if (!mask)
+		return IRQ_NONE;
+
+	for (i = info->intr_start_idx[MIC_INTR_DB];
+			i < info->intr_len[MIC_INTR_DB]; i++)
+		if (mask & BIT(i))
+			mic_invoke_callback(mdev, i);
+
+	return IRQ_HANDLED;
+}
+
+/* Return the interrupt offset from the index. Index is 0 based. */
+static u16 mic_map_src_to_offset(struct mic_device *mdev,
+		int intr_src, enum mic_intr_type type)
+{
+	if (type >= MIC_NUM_INTR_TYPES)
+		return MIC_NUM_OFFSETS;
+	if (intr_src >= mdev->intr_info->intr_len[type])
+		return MIC_NUM_OFFSETS;
+
+	return mdev->intr_info->intr_start_idx[type] + intr_src;
+}
+
+/* Return next available msix_entry. */
+static struct msix_entry *mic_get_available_vector(struct mic_device *mdev)
+{
+	int i;
+	struct mic_irq_info *info = &mdev->irq_info;
+
+	for (i = 0; i < info->num_vectors; i++)
+		if (!info->mic_msi_map[i])
+			return &info->msix_entries[i];
+	return NULL;
+}
+
+/**
+ * mic_register_intr_callback - Register a callback handler for the
+ * given source id.
+ *
+ * @mdev: pointer to the mic_device instance
+ * @idx: The source id to be registered.
+ * @func: The function to be called when the source id receives
+ * the interrupt.
+ * @data: Private data of the requester.
+ * Return the callback structure that was registered or an
+ * appropriate error on failure.
+ */
+static struct mic_intr_cb *mic_register_intr_callback(struct mic_device *mdev,
+			u8 idx, irqreturn_t (*func) (int irq, void *dev),
+			void *data)
+{
+	struct mic_intr_cb *intr_cb;
+	unsigned long flags;
+	int rc;
+	intr_cb = kmalloc(sizeof(*intr_cb), GFP_KERNEL);
+
+	if (!intr_cb)
+		return ERR_PTR(-ENOMEM);
+
+	intr_cb->func = func;
+	intr_cb->data = data;
+	intr_cb->cb_id = ida_simple_get(&mdev->irq_info.cb_ida,
+		0, 0, GFP_KERNEL);
+	if (intr_cb->cb_id < 0) {
+		rc = intr_cb->cb_id;
+		goto ida_fail;
+	}
+
+	spin_lock_irqsave(&mdev->irq_info.mic_intr_lock, flags);
+	list_add_tail(&intr_cb->list, &mdev->irq_info.cb_list[idx]);
+	spin_unlock_irqrestore(&mdev->irq_info.mic_intr_lock, flags);
+
+	return intr_cb;
+ida_fail:
+	kfree(intr_cb);
+	return ERR_PTR(rc);
+}
+
+/**
+ * mic_unregister_intr_callback - Unregister the callback handler
+ * identified by its callback id.
+ *
+ * @mdev: pointer to the mic_device instance
+ * @idx: The callback structure id to be unregistered.
+ * Return the source id that was unregistered or MIC_NUM_OFFSETS if no
+ * such callback handler was found.
+ */
+static u8 mic_unregister_intr_callback(struct mic_device *mdev, u32 idx)
+{
+	struct list_head *pos, *tmp;
+	struct mic_intr_cb *intr_cb;
+	unsigned long flags;
+	int i;
+
+	for (i = 0;  i < MIC_NUM_OFFSETS; i++) {
+		spin_lock_irqsave(&mdev->irq_info.mic_intr_lock, flags);
+		list_for_each_safe(pos, tmp, &mdev->irq_info.cb_list[i]) {
+			intr_cb = list_entry(pos, struct mic_intr_cb, list);
+			if (intr_cb->cb_id == idx) {
+				list_del(pos);
+				ida_simple_remove(&mdev->irq_info.cb_ida,
+						  intr_cb->cb_id);
+				kfree(intr_cb);
+				spin_unlock_irqrestore(
+					&mdev->irq_info.mic_intr_lock, flags);
+				return i;
+			}
+		}
+		spin_unlock_irqrestore(&mdev->irq_info.mic_intr_lock, flags);
+	}
+	return MIC_NUM_OFFSETS;
+}
+
+/**
+ * mic_setup_msix - Initializes MSIx interrupts.
+ *
+ * @mdev: pointer to mic_device instance
+ *
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int mic_setup_msix(struct mic_device *mdev, struct pci_dev *pdev)
+{
+	int rc, i;
+	int entry_size = sizeof(*mdev->irq_info.msix_entries);
+
+	mdev->irq_info.msix_entries = kmalloc_array(MIC_MIN_MSIX,
+						    entry_size, GFP_KERNEL);
+	if (!mdev->irq_info.msix_entries) {
+		rc = -ENOMEM;
+		goto err_nomem1;
+	}
+
+	for (i = 0; i < MIC_MIN_MSIX; i++)
+		mdev->irq_info.msix_entries[i].entry = i;
+
+	rc = pci_enable_msix(pdev, mdev->irq_info.msix_entries,
+		MIC_MIN_MSIX);
+	if (rc) {
+		dev_dbg(&pdev->dev, "Error enabling MSIx. rc = %d\n", rc);
+		goto err_enable_msix;
+	}
+
+	mdev->irq_info.num_vectors = MIC_MIN_MSIX;
+	mdev->irq_info.mic_msi_map = kzalloc((sizeof(u32) *
+		mdev->irq_info.num_vectors), GFP_KERNEL);
+
+	if (!mdev->irq_info.mic_msi_map) {
+		rc = -ENOMEM;
+		goto err_nomem2;
+	}
+
+	dev_dbg(mdev->sdev->parent,
+		"%d MSIx irqs setup\n", mdev->irq_info.num_vectors);
+	return 0;
+err_nomem2:
+	pci_disable_msix(pdev);
+err_enable_msix:
+	kfree(mdev->irq_info.msix_entries);
+err_nomem1:
+	mdev->irq_info.num_vectors = 0;
+	return rc;
+}
+
+/**
+ * mic_setup_callbacks - Initialize data structures needed
+ * to handle callbacks.
+ *
+ * @mdev: pointer to mic_device instance
+ */
+static int mic_setup_callbacks(struct mic_device *mdev)
+{
+	int i;
+
+	mdev->irq_info.cb_list = kmalloc_array(MIC_NUM_OFFSETS,
+					       sizeof(*mdev->irq_info.cb_list),
+					       GFP_KERNEL);
+	if (!mdev->irq_info.cb_list)
+		return -ENOMEM;
+
+	for (i = 0; i < MIC_NUM_OFFSETS; i++)
+		INIT_LIST_HEAD(&mdev->irq_info.cb_list[i]);
+	ida_init(&mdev->irq_info.cb_ida);
+	spin_lock_init(&mdev->irq_info.mic_intr_lock);
+	return 0;
+}
+
+/**
+ * mic_release_callbacks - Uninitialize data structures needed
+ * to handle callbacks.
+ *
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_release_callbacks(struct mic_device *mdev)
+{
+	unsigned long flags;
+	struct list_head *pos, *tmp;
+	struct mic_intr_cb *intr_cb;
+	int i;
+
+	for (i = 0; i < MIC_NUM_OFFSETS; i++) {
+		spin_lock_irqsave(&mdev->irq_info.mic_intr_lock, flags);
+
+		if (list_empty(&mdev->irq_info.cb_list[i])) {
+			spin_unlock_irqrestore(&mdev->irq_info.mic_intr_lock,
+					       flags);
+			break;
+		}
+
+		list_for_each_safe(pos, tmp, &mdev->irq_info.cb_list[i]) {
+			intr_cb = list_entry(pos, struct mic_intr_cb, list);
+			list_del(pos);
+			ida_simple_remove(&mdev->irq_info.cb_ida,
+					  intr_cb->cb_id);
+			kfree(intr_cb);
+		}
+		spin_unlock_irqrestore(&mdev->irq_info.mic_intr_lock, flags);
+	}
+	ida_destroy(&mdev->irq_info.cb_ida);
+	kfree(mdev->irq_info.cb_list);
+}
+
+/**
+ * mic_setup_msi - Initializes MSI interrupts.
+ *
+ * @mdev: pointer to mic_device instance
+ * @pdev: PCI device structure
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int mic_setup_msi(struct mic_device *mdev, struct pci_dev *pdev)
+{
+	int rc;
+
+	rc = pci_enable_msi(pdev);
+	if (rc) {
+		dev_dbg(&pdev->dev, "Error enabling MSI. rc = %d\n", rc);
+		return rc;
+	}
+
+	mdev->irq_info.num_vectors = 1;
+	mdev->irq_info.mic_msi_map = kzalloc((sizeof(u32) *
+		mdev->irq_info.num_vectors), GFP_KERNEL);
+
+	if (!mdev->irq_info.mic_msi_map) {
+		rc = -ENOMEM;
+		goto err_nomem1;
+	}
+
+	rc = mic_setup_callbacks(mdev);
+	if (rc) {
+		dev_err(&pdev->dev, "Error setting up callbacks\n");
+		goto err_nomem2;
+	}
+
+	rc = request_irq(pdev->irq, mic_interrupt, 0 , "mic-msi", mdev);
+	if (rc) {
+		dev_err(&pdev->dev, "Error allocating MSI interrupt\n");
+		goto err_irq_req_fail;
+	}
+
+	dev_dbg(&pdev->dev, "%d MSI irqs setup\n", mdev->irq_info.num_vectors);
+	return 0;
+err_irq_req_fail:
+	mic_release_callbacks(mdev);
+err_nomem2:
+	kfree(mdev->irq_info.mic_msi_map);
+err_nomem1:
+	pci_disable_msi(pdev);
+	mdev->irq_info.num_vectors = 0;
+	return rc;
+}
+
+/**
+ * mic_setup_intx - Initializes legacy interrupts.
+ *
+ * @mdev: pointer to mic_device instance
+ * @pdev: PCI device structure
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int mic_setup_intx(struct mic_device *mdev, struct pci_dev *pdev)
+{
+	int rc;
+
+	pci_msi_off(pdev);
+
+	/* Enable intx */
+	pci_intx(pdev, 1);
+	rc = mic_setup_callbacks(mdev);
+	if (rc) {
+		dev_err(&pdev->dev, "Error setting up callbacks\n");
+		goto err_nomem;
+	}
+
+	rc = request_irq(pdev->irq, mic_interrupt,
+		IRQF_SHARED, "mic-intx", mdev);
+	if (rc)
+		goto err;
+
+	dev_dbg(&pdev->dev, "intx irq setup\n");
+	return 0;
+err:
+	mic_release_callbacks(mdev);
+err_nomem:
+	return rc;
+}
+
+/**
+ * mic_next_db - Retrieve the next doorbell interrupt source id.
+ * The id is picked sequentially from the available pool of
+ * doorlbell ids.
+ *
+ * @mdev: pointer to the mic_device instance.
+ *
+ * Returns the next doorbell interrupt source.
+ */
+int mic_next_db(struct mic_device *mdev)
+{
+	int next_db;
+
+	next_db = mdev->irq_info.next_avail_src %
+		mdev->intr_info->intr_len[MIC_INTR_DB];
+	mdev->irq_info.next_avail_src++;
+	return next_db;
+}
+
+#define COOKIE_ID_SHIFT 16
+#define GET_ENTRY(cookie) ((cookie) & 0xFFFF)
+#define GET_OFFSET(cookie) ((cookie) >> COOKIE_ID_SHIFT)
+#define MK_COOKIE(x, y) ((x) | (y) << COOKIE_ID_SHIFT)
+
+/**
+ * mic_request_irq - request an irq. mic_mutex needs
+ * to be held before calling this function.
+ *
+ * @mdev: pointer to mic_device instance
+ * @func: The callback function that handles the interrupt.
+ * The function needs to call ack_interrupts
+ * (mdev->ops->ack_interrupt(mdev)) when handling the interrupts.
+ * @name: The ASCII name of the callee requesting the irq.
+ * @data: private data that is returned back when calling the
+ * function handler.
+ * @intr_src: The source id of the requester. Its the doorbell id
+ * for Doorbell interrupts and DMA channel id for DMA interrupts.
+ * @type: The type of interrupt. Values defined in mic_intr_type
+ *
+ * returns: The cookie that is transparent to the caller. Passed
+ * back when calling mic_free_irq. An appropriate error code
+ * is returned on failure. Caller needs to use IS_ERR(return_val)
+ * to check for failure and PTR_ERR(return_val) to obtained the
+ * error code.
+ *
+ */
+struct mic_irq *mic_request_irq(struct mic_device *mdev,
+	irqreturn_t (*func)(int irq, void *dev),
+	const char *name, void *data, int intr_src,
+	enum mic_intr_type type)
+{
+	u16 offset;
+	int rc = 0;
+	struct msix_entry *msix = NULL;
+	unsigned long cookie = 0;
+	u16 entry;
+	struct mic_intr_cb *intr_cb;
+	struct pci_dev *pdev = container_of(mdev->sdev->parent,
+		struct pci_dev, dev);
+
+	offset = mic_map_src_to_offset(mdev, intr_src, type);
+	if (offset >= MIC_NUM_OFFSETS) {
+		dev_err(mdev->sdev->parent,
+			"Error mapping index %d to a valid source id.\n",
+			intr_src);
+		rc = -EINVAL;
+		goto err;
+	}
+
+	if (mdev->irq_info.num_vectors > 1) {
+		msix = mic_get_available_vector(mdev);
+		if (!msix) {
+			dev_err(mdev->sdev->parent,
+				"No MSIx vectors available for use.\n");
+			rc = -ENOSPC;
+			goto err;
+		}
+
+		rc = request_irq(msix->vector, func, 0, name, data);
+		if (rc) {
+			dev_dbg(mdev->sdev->parent,
+				"request irq failed rc = %d\n", rc);
+			goto err;
+		}
+		entry = msix->entry;
+		mdev->irq_info.mic_msi_map[entry] |= BIT(offset);
+		mdev->intr_ops->program_msi_to_src_map(mdev,
+				entry, offset, true);
+		cookie = MK_COOKIE(entry, offset);
+		dev_dbg(mdev->sdev->parent, "irq: %d assigned for src: %d\n",
+			msix->vector, intr_src);
+	} else {
+		intr_cb = mic_register_intr_callback(mdev,
+				offset, func, data);
+		if (IS_ERR(intr_cb)) {
+			dev_err(mdev->sdev->parent,
+				"No available callback entries for use\n");
+			rc = PTR_ERR(intr_cb);
+			goto err;
+		}
+
+		entry = 0;
+		if (pci_dev_msi_enabled(pdev)) {
+			mdev->irq_info.mic_msi_map[entry] |= (1 << offset);
+			mdev->intr_ops->program_msi_to_src_map(mdev,
+				entry, offset, true);
+		}
+		cookie = MK_COOKIE(entry, intr_cb->cb_id);
+		dev_dbg(mdev->sdev->parent, "callback %d registered for src: %d\n",
+			intr_cb->cb_id, intr_src);
+	}
+	return (struct mic_irq *)cookie;
+err:
+	return ERR_PTR(rc);
+}
+
+/**
+ * mic_free_irq - free irq. mic_mutex
+ *  needs to be held before calling this function.
+ *
+ * @mdev: pointer to mic_device instance
+ * @cookie: cookie obtained during a successful call to mic_request_irq
+ * @data: private data specified by the calling function during the
+ * mic_request_irq
+ *
+ * returns: none.
+ */
+void mic_free_irq(struct mic_device *mdev,
+	struct mic_irq *cookie, void *data)
+{
+	u32 offset;
+	u32 entry;
+	u8 src_id;
+	unsigned int irq;
+	struct pci_dev *pdev = container_of(mdev->sdev->parent,
+		struct pci_dev, dev);
+
+	entry = GET_ENTRY((unsigned long)cookie);
+	offset = GET_OFFSET((unsigned long)cookie);
+	if (mdev->irq_info.num_vectors > 1) {
+		if (entry >= mdev->irq_info.num_vectors) {
+			dev_warn(mdev->sdev->parent,
+				 "entry %d should be < num_irq %d\n",
+				entry, mdev->irq_info.num_vectors);
+			return;
+		}
+		irq = mdev->irq_info.msix_entries[entry].vector;
+		free_irq(irq, data);
+		mdev->irq_info.mic_msi_map[entry] &= ~(BIT(offset));
+		mdev->intr_ops->program_msi_to_src_map(mdev,
+			entry, offset, false);
+
+		dev_dbg(mdev->sdev->parent, "irq: %d freed\n", irq);
+	} else {
+		irq = pdev->irq;
+		src_id = mic_unregister_intr_callback(mdev, offset);
+		if (src_id >= MIC_NUM_OFFSETS) {
+			dev_warn(mdev->sdev->parent, "Error unregistering callback\n");
+			return;
+		}
+		if (pci_dev_msi_enabled(pdev)) {
+			mdev->irq_info.mic_msi_map[entry] &= ~(BIT(src_id));
+			mdev->intr_ops->program_msi_to_src_map(mdev,
+				entry, src_id, false);
+		}
+		dev_dbg(mdev->sdev->parent, "callback %d unregistered for src: %d\n",
+			offset, src_id);
+	}
+}
+
+/**
+ * mic_setup_interrupts - Initializes interrupts.
+ *
+ * @mdev: pointer to mic_device instance
+ * @pdev: PCI device structure
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+int mic_setup_interrupts(struct mic_device *mdev, struct pci_dev *pdev)
+{
+	int rc;
+
+	rc = mic_setup_msix(mdev, pdev);
+	if (!rc)
+		goto done;
+
+	rc = mic_setup_msi(mdev, pdev);
+	if (!rc)
+		goto done;
+
+	rc = mic_setup_intx(mdev, pdev);
+	if (rc) {
+		dev_err(mdev->sdev->parent, "no usable interrupts\n");
+		return rc;
+	}
+done:
+	mdev->intr_ops->enable_interrupts(mdev);
+	return 0;
+}
+
+/**
+ * mic_free_interrupts - Frees interrupts setup by mic_setup_interrupts
+ *
+ * @mdev: pointer to mic_device instance
+ * @pdev: PCI device structure
+ *
+ * returns none.
+ */
+void mic_free_interrupts(struct mic_device *mdev, struct pci_dev *pdev)
+{
+	int i;
+
+	mdev->intr_ops->disable_interrupts(mdev);
+	if (mdev->irq_info.num_vectors > 1) {
+		for (i = 0; i < mdev->irq_info.num_vectors; i++) {
+			if (mdev->irq_info.mic_msi_map[i])
+				dev_warn(&pdev->dev, "irq %d may still be in use.\n",
+					 mdev->irq_info.msix_entries[i].vector);
+		}
+		kfree(mdev->irq_info.mic_msi_map);
+		kfree(mdev->irq_info.msix_entries);
+		pci_disable_msix(pdev);
+	} else {
+		if (pci_dev_msi_enabled(pdev)) {
+			free_irq(pdev->irq, mdev);
+			kfree(mdev->irq_info.mic_msi_map);
+			pci_disable_msi(pdev);
+		} else {
+			free_irq(pdev->irq, mdev);
+		}
+		mic_release_callbacks(mdev);
+	}
+}
+
+/**
+ * mic_intr_restore - Restore MIC interrupt registers.
+ *
+ * @mdev: pointer to mic_device instance.
+ *
+ * Restore the interrupt registers to values previously
+ * stored in the SW data structures. mic_mutex needs to
+ * be held before calling this function.
+ *
+ * returns None.
+ */
+void mic_intr_restore(struct mic_device *mdev)
+{
+	int entry, offset;
+	struct pci_dev *pdev = container_of(mdev->sdev->parent,
+		struct pci_dev, dev);
+
+	if (!pci_dev_msi_enabled(pdev))
+		return;
+
+	for (entry = 0; entry < mdev->irq_info.num_vectors; entry++) {
+		for (offset = 0; offset < MIC_NUM_OFFSETS; offset++) {
+			if (mdev->irq_info.mic_msi_map[entry] & BIT(offset))
+				mdev->intr_ops->program_msi_to_src_map(mdev,
+					entry, offset, true);
+		}
+	}
+}
diff --git a/drivers/misc/mic/host/mic_intr.h b/drivers/misc/mic/host/mic_intr.h
new file mode 100644
index 0000000..6091aa9
--- /dev/null
+++ b/drivers/misc/mic/host/mic_intr.h
@@ -0,0 +1,137 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#ifndef _MIC_INTR_H_
+#define _MIC_INTR_H_
+
+/*
+ * The minimum number of msix vectors required for normal operation.
+ * 3 for virtio network, console and block devices.
+ * 1 for card shutdown notifications.
+ */
+#define MIC_MIN_MSIX 4
+#define MIC_NUM_OFFSETS 32
+
+/**
+ * mic_intr_source - The type of source that will generate
+ * the interrupt.The number of types needs to be in sync with
+ * MIC_NUM_INTR_TYPES
+ *
+ * MIC_INTR_DB: The source is a doorbell
+ * MIC_INTR_DMA: The source is a DMA channel
+ * MIC_INTR_ERR: The source is an error interrupt e.g. SBOX ERR
+ * MIC_NUM_INTR_TYPES: Total number of interrupt sources.
+ */
+enum mic_intr_type {
+	MIC_INTR_DB = 0,
+	MIC_INTR_DMA,
+	MIC_INTR_ERR,
+	MIC_NUM_INTR_TYPES
+};
+
+/**
+ * struct mic_intr_info - Contains h/w specific interrupt sources
+ * information.
+ *
+ * @intr_start_idx: Contains the starting indexes of the
+ * interrupt types.
+ * @intr_len: Contains the length of the interrupt types.
+ */
+struct mic_intr_info {
+	u16 intr_start_idx[MIC_NUM_INTR_TYPES];
+	u16 intr_len[MIC_NUM_INTR_TYPES];
+};
+
+/**
+ * struct mic_irq_info - OS specific irq information
+ *
+ * @next_avail_src: next available doorbell that can be assigned.
+ * @msix_entries: msix entries allocated while setting up MSI-x
+ * @mic_msi_map: The MSI/MSI-x mapping information.
+ * @num_vectors: The number of MSI/MSI-x vectors that have been allocated.
+ * @cb_ida: callback ID allocator to track the callbacks registered.
+ * @mic_intr_lock: spinlock to protect the interrupt callback list.
+ * @cb_list: Array of callback lists one for each source.
+ */
+struct mic_irq_info {
+	int next_avail_src;
+	struct msix_entry *msix_entries;
+	u32 *mic_msi_map;
+	u16 num_vectors;
+	struct ida cb_ida;
+	spinlock_t mic_intr_lock;
+	struct list_head *cb_list;
+};
+
+/**
+ * struct mic_intr_cb - Interrupt callback structure.
+ *
+ * @func: The callback function
+ * @data: Private data of the requester.
+ * @cb_id: The callback id. Identifies this callback.
+ * @list: list head pointing to the next callback structure.
+ */
+struct mic_intr_cb {
+	irqreturn_t (*func) (int irq, void *data);
+	void *data;
+	int cb_id;
+	struct list_head list;
+};
+
+/**
+ * struct mic_irq - opaque pointer used as cookie
+ */
+struct mic_irq;
+
+/* Forward declaration */
+struct mic_device;
+
+/**
+ * struct mic_hw_intr_ops: MIC HW specific interrupt operations
+ * @intr_init: Initialize H/W specific interrupt information.
+ * @enable_interrupts: Enable interrupts from the hardware.
+ * @disable_interrupts: Disable interrupts from the hardware.
+ * @program_msi_to_src_map: Update MSI mapping registers with
+ * irq information.
+ * @read_msi_to_src_map: Read MSI mapping registers containing
+ * irq information.
+ */
+struct mic_hw_intr_ops {
+	void (*intr_init)(struct mic_device *mdev);
+	void (*enable_interrupts)(struct mic_device *mdev);
+	void (*disable_interrupts)(struct mic_device *mdev);
+	void (*program_msi_to_src_map) (struct mic_device *mdev,
+			int idx, int intr_src, bool set);
+	u32 (*read_msi_to_src_map) (struct mic_device *mdev,
+			int idx);
+};
+
+int mic_next_db(struct mic_device *mdev);
+struct mic_irq *mic_request_irq(struct mic_device *mdev,
+	irqreturn_t (*func)(int irq, void *data),
+	const char *name, void *data, int intr_src,
+	enum mic_intr_type type);
+
+void mic_free_irq(struct mic_device *mdev,
+		struct mic_irq *cookie, void *data);
+int mic_setup_interrupts(struct mic_device *mdev, struct pci_dev *pdev);
+void mic_free_interrupts(struct mic_device *mdev, struct pci_dev *pdev);
+void mic_intr_restore(struct mic_device *mdev);
+#endif
diff --git a/drivers/misc/mic/host/mic_main.c b/drivers/misc/mic/host/mic_main.c
new file mode 100644
index 0000000..ad838c7
--- /dev/null
+++ b/drivers/misc/mic/host/mic_main.c
@@ -0,0 +1,536 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ * Global TODO's across the driver to be added after initial base
+ * patches are accepted upstream:
+ * 1) Enable DMA support.
+ * 2) Enable per vring interrupt support.
+ */
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/suspend.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_x100.h"
+#include "mic_smpt.h"
+#include "mic_fops.h"
+#include "mic_virtio.h"
+
+static const char mic_driver_name[] = "mic";
+
+static DEFINE_PCI_DEVICE_TABLE(mic_pci_tbl) = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2250)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2251)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2252)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2253)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2254)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2255)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2256)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2257)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2258)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2259)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225a)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225b)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225c)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225d)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225e)},
+
+	/* required last entry */
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, mic_pci_tbl);
+
+/* ID allocator for MIC devices */
+static struct ida g_mic_ida;
+/* Class of MIC devices for sysfs accessibility. */
+static struct class *g_mic_class;
+/* Base device node number for MIC devices */
+static dev_t g_mic_devno;
+
+static const struct file_operations mic_fops = {
+	.open = mic_open,
+	.release = mic_release,
+	.unlocked_ioctl = mic_ioctl,
+	.poll = mic_poll,
+	.mmap = mic_mmap,
+	.owner = THIS_MODULE,
+};
+
+/* Initialize the device page */
+static int mic_dp_init(struct mic_device *mdev)
+{
+	mdev->dp = kzalloc(MIC_DP_SIZE, GFP_KERNEL);
+	if (!mdev->dp) {
+		dev_err(mdev->sdev->parent, "%s %d err %d\n",
+			__func__, __LINE__, -ENOMEM);
+		return -ENOMEM;
+	}
+
+	mdev->dp_dma_addr = mic_map_single(mdev,
+		mdev->dp, MIC_DP_SIZE);
+	if (mic_map_error(mdev->dp_dma_addr)) {
+		kfree(mdev->dp);
+		dev_err(mdev->sdev->parent, "%s %d err %d\n",
+			__func__, __LINE__, -ENOMEM);
+		return -ENOMEM;
+	}
+	mdev->ops->write_spad(mdev, MIC_DPLO_SPAD, mdev->dp_dma_addr);
+	mdev->ops->write_spad(mdev, MIC_DPHI_SPAD, mdev->dp_dma_addr >> 32);
+	return 0;
+}
+
+/* Uninitialize the device page */
+static void mic_dp_uninit(struct mic_device *mdev)
+{
+	mic_unmap_single(mdev, mdev->dp_dma_addr, MIC_DP_SIZE);
+	kfree(mdev->dp);
+}
+
+/**
+ * mic_shutdown_db - Shutdown doorbell interrupt handler.
+ */
+static irqreturn_t mic_shutdown_db(int irq, void *data)
+{
+	struct mic_device *mdev = data;
+	struct mic_bootparam *bootparam = mdev->dp;
+
+	mdev->ops->ack_interrupt(mdev);
+
+	switch (bootparam->shutdown_status) {
+	case MIC_HALTED:
+	case MIC_POWER_OFF:
+	case MIC_RESTART:
+		/* Fall through */
+	case MIC_CRASHED:
+		schedule_work(&mdev->shutdown_work);
+		break;
+	default:
+		break;
+	};
+	return IRQ_HANDLED;
+}
+
+/**
+ * mic_ops_init: Initialize HW specific operation tables.
+ *
+ * @mdev: pointer to mic_device instance
+ *
+ * returns none.
+ */
+static void mic_ops_init(struct mic_device *mdev)
+{
+	switch (mdev->family) {
+	case MIC_FAMILY_X100:
+		mdev->ops = &mic_x100_ops;
+		mdev->intr_ops = &mic_x100_intr_ops;
+		mdev->smpt_ops = &mic_x100_smpt_ops;
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * mic_get_family - Determine hardware family to which this MIC belongs.
+ *
+ * @pdev: The pci device structure
+ *
+ * returns family.
+ */
+static enum mic_hw_family mic_get_family(struct pci_dev *pdev)
+{
+	enum mic_hw_family family;
+
+	switch (pdev->device) {
+	case MIC_X100_PCI_DEVICE_2250:
+	case MIC_X100_PCI_DEVICE_2251:
+	case MIC_X100_PCI_DEVICE_2252:
+	case MIC_X100_PCI_DEVICE_2253:
+	case MIC_X100_PCI_DEVICE_2254:
+	case MIC_X100_PCI_DEVICE_2255:
+	case MIC_X100_PCI_DEVICE_2256:
+	case MIC_X100_PCI_DEVICE_2257:
+	case MIC_X100_PCI_DEVICE_2258:
+	case MIC_X100_PCI_DEVICE_2259:
+	case MIC_X100_PCI_DEVICE_225a:
+	case MIC_X100_PCI_DEVICE_225b:
+	case MIC_X100_PCI_DEVICE_225c:
+	case MIC_X100_PCI_DEVICE_225d:
+	case MIC_X100_PCI_DEVICE_225e:
+		family = MIC_FAMILY_X100;
+		break;
+	default:
+		family = MIC_FAMILY_UNKNOWN;
+		break;
+	}
+	return family;
+}
+
+/**
+* mic_pm_notifier: Notifier callback function that handles
+* PM notifications.
+*
+* @notifier_block: The notifier structure.
+* @pm_event: The event for which the driver was notified.
+* @unused: Meaningless. Always NULL.
+*
+* returns NOTIFY_DONE
+*/
+static int mic_pm_notifier(struct notifier_block *notifier,
+		unsigned long pm_event, void *unused)
+{
+	struct mic_device *mdev = container_of(notifier,
+		struct mic_device, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+		/* Fall through */
+	case PM_SUSPEND_PREPARE:
+		mic_prepare_suspend(mdev);
+		break;
+	case PM_POST_HIBERNATION:
+		/* Fall through */
+	case PM_POST_SUSPEND:
+		/* Fall through */
+	case PM_POST_RESTORE:
+		mic_complete_resume(mdev);
+		break;
+	case PM_RESTORE_PREPARE:
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+/**
+ * mic_device_init - Allocates and initializes the MIC device structure
+ *
+ * @mdev: pointer to mic_device instance
+ * @pdev: The pci device structure
+ *
+ * returns none.
+ */
+static int
+mic_device_init(struct mic_device *mdev, struct pci_dev *pdev)
+{
+	int rc;
+
+	mdev->family = mic_get_family(pdev);
+	mdev->stepping = pdev->revision;
+	mic_ops_init(mdev);
+	mic_sysfs_init(mdev);
+	mutex_init(&mdev->mic_mutex);
+	mdev->irq_info.next_avail_src = 0;
+	INIT_WORK(&mdev->reset_trigger_work, mic_reset_trigger_work);
+	INIT_WORK(&mdev->shutdown_work, mic_shutdown_work);
+	init_completion(&mdev->reset_wait);
+	INIT_LIST_HEAD(&mdev->vdev_list);
+	mdev->pm_notifier.notifier_call = mic_pm_notifier;
+	rc = register_pm_notifier(&mdev->pm_notifier);
+	if (rc) {
+		dev_err(&pdev->dev, "register_pm_notifier failed rc %d\n",
+			rc);
+		goto register_pm_notifier_fail;
+	}
+	return 0;
+register_pm_notifier_fail:
+	flush_work(&mdev->shutdown_work);
+	flush_work(&mdev->reset_trigger_work);
+	return rc;
+}
+
+/**
+ * mic_device_uninit - Frees resources allocated during mic_device_init(..)
+ *
+ * @mdev: pointer to mic_device instance
+ *
+ * returns none
+ */
+static void mic_device_uninit(struct mic_device *mdev)
+{
+	/* The cmdline sysfs entry might have allocated cmdline */
+	kfree(mdev->cmdline);
+	kfree(mdev->firmware);
+	kfree(mdev->ramdisk);
+	kfree(mdev->bootmode);
+	flush_work(&mdev->reset_trigger_work);
+	flush_work(&mdev->shutdown_work);
+	unregister_pm_notifier(&mdev->pm_notifier);
+}
+
+/**
+ * mic_probe - Device Initialization Routine
+ *
+ * @pdev: PCI device structure
+ * @ent: entry in mic_pci_tbl
+ *
+ * returns 0 on success, < 0 on failure.
+ */
+static int mic_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	int rc;
+	struct mic_device *mdev;
+
+	mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
+	if (!mdev) {
+		rc = -ENOMEM;
+		dev_err(&pdev->dev, "mdev kmalloc failed rc %d\n", rc);
+		goto mdev_alloc_fail;
+	}
+	mdev->id = ida_simple_get(&g_mic_ida, 0, MIC_MAX_NUM_DEVS, GFP_KERNEL);
+	if (mdev->id < 0) {
+		rc = mdev->id;
+		dev_err(&pdev->dev, "ida_simple_get failed rc %d\n", rc);
+		goto ida_fail;
+	}
+
+	rc = mic_device_init(mdev, pdev);
+	if (rc) {
+		dev_err(&pdev->dev, "mic_device_init failed rc %d\n", rc);
+		goto device_init_fail;
+	}
+
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to enable pci device.\n");
+		goto uninit_device;
+	}
+
+	pci_set_master(pdev);
+
+	rc = pci_request_regions(pdev, mic_driver_name);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to get pci regions.\n");
+		goto disable_device;
+	}
+
+	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot set DMA mask\n");
+		goto release_regions;
+	}
+
+	mdev->mmio.pa = pci_resource_start(pdev, mdev->ops->mmio_bar);
+	mdev->mmio.len = pci_resource_len(pdev, mdev->ops->mmio_bar);
+	mdev->mmio.va = pci_ioremap_bar(pdev, mdev->ops->mmio_bar);
+	if (!mdev->mmio.va) {
+		dev_err(&pdev->dev, "Cannot remap MMIO BAR\n");
+		rc = -EIO;
+		goto release_regions;
+	}
+
+	mdev->aper.pa = pci_resource_start(pdev, mdev->ops->aper_bar);
+	mdev->aper.len = pci_resource_len(pdev, mdev->ops->aper_bar);
+	mdev->aper.va = ioremap_wc(mdev->aper.pa, mdev->aper.len);
+	if (!mdev->aper.va) {
+		dev_err(&pdev->dev, "Cannot remap Aperture BAR\n");
+		rc = -EIO;
+		goto unmap_mmio;
+	}
+
+	mdev->intr_ops->intr_init(mdev);
+	rc = mic_setup_interrupts(mdev, pdev);
+	if (rc) {
+		dev_err(&pdev->dev, "mic_setup_interrupts failed %d\n", rc);
+		goto unmap_aper;
+	}
+	rc = mic_smpt_init(mdev);
+	if (rc) {
+		dev_err(&pdev->dev, "smpt_init failed %d\n", rc);
+		goto free_interrupts;
+	}
+
+	pci_set_drvdata(pdev, mdev);
+
+	mdev->sdev = device_create_with_groups(g_mic_class, &pdev->dev,
+		MKDEV(MAJOR(g_mic_devno), mdev->id), NULL,
+		mdev->attr_group, "mic%d", mdev->id);
+	if (IS_ERR(mdev->sdev)) {
+		rc = PTR_ERR(mdev->sdev);
+		dev_err(&pdev->dev,
+			"device_create_with_groups failed rc %d\n", rc);
+		goto smpt_uninit;
+	}
+	mdev->state_sysfs = sysfs_get_dirent(mdev->sdev->kobj.sd, "state");
+	if (!mdev->state_sysfs) {
+		rc = -ENODEV;
+		dev_err(&pdev->dev, "sysfs_get_dirent failed rc %d\n", rc);
+		goto destroy_device;
+	}
+
+	rc = mic_dp_init(mdev);
+	if (rc) {
+		dev_err(&pdev->dev, "mic_dp_init failed rc %d\n", rc);
+		goto sysfs_put;
+	}
+	mutex_lock(&mdev->mic_mutex);
+
+	mdev->shutdown_db = mic_next_db(mdev);
+	mdev->shutdown_cookie = mic_request_irq(mdev, mic_shutdown_db,
+		"shutdown-interrupt", mdev, mdev->shutdown_db, MIC_INTR_DB);
+	if (IS_ERR(mdev->shutdown_cookie)) {
+		rc = PTR_ERR(mdev->shutdown_cookie);
+		mutex_unlock(&mdev->mic_mutex);
+		goto dp_uninit;
+	}
+	mutex_unlock(&mdev->mic_mutex);
+	mic_bootparam_init(mdev);
+
+	mic_create_debug_dir(mdev);
+	cdev_init(&mdev->cdev, &mic_fops);
+	mdev->cdev.owner = THIS_MODULE;
+	rc = cdev_add(&mdev->cdev, MKDEV(MAJOR(g_mic_devno), mdev->id), 1);
+	if (rc) {
+		dev_err(&pdev->dev, "cdev_add err id %d rc %d\n", mdev->id, rc);
+		goto cleanup_debug_dir;
+	}
+	return 0;
+cleanup_debug_dir:
+	mic_delete_debug_dir(mdev);
+	mutex_lock(&mdev->mic_mutex);
+	mic_free_irq(mdev, mdev->shutdown_cookie, mdev);
+	mutex_unlock(&mdev->mic_mutex);
+dp_uninit:
+	mic_dp_uninit(mdev);
+sysfs_put:
+	sysfs_put(mdev->state_sysfs);
+destroy_device:
+	device_destroy(g_mic_class, MKDEV(MAJOR(g_mic_devno), mdev->id));
+smpt_uninit:
+	mic_smpt_uninit(mdev);
+free_interrupts:
+	mic_free_interrupts(mdev, pdev);
+unmap_aper:
+	iounmap(mdev->aper.va);
+unmap_mmio:
+	iounmap(mdev->mmio.va);
+release_regions:
+	pci_release_regions(pdev);
+disable_device:
+	pci_disable_device(pdev);
+uninit_device:
+	mic_device_uninit(mdev);
+device_init_fail:
+	ida_simple_remove(&g_mic_ida, mdev->id);
+ida_fail:
+	kfree(mdev);
+mdev_alloc_fail:
+	dev_err(&pdev->dev, "Probe failed rc %d\n", rc);
+	return rc;
+}
+
+/**
+ * mic_remove - Device Removal Routine
+ * mic_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.
+ *
+ * @pdev: PCI device structure
+ */
+static void mic_remove(struct pci_dev *pdev)
+{
+	struct mic_device *mdev;
+
+	mdev = pci_get_drvdata(pdev);
+	if (!mdev)
+		return;
+
+	mic_stop(mdev, false);
+	cdev_del(&mdev->cdev);
+	mic_delete_debug_dir(mdev);
+	mutex_lock(&mdev->mic_mutex);
+	mic_free_irq(mdev, mdev->shutdown_cookie, mdev);
+	mutex_unlock(&mdev->mic_mutex);
+	flush_work(&mdev->shutdown_work);
+	mic_dp_uninit(mdev);
+	sysfs_put(mdev->state_sysfs);
+	device_destroy(g_mic_class, MKDEV(MAJOR(g_mic_devno), mdev->id));
+	mic_smpt_uninit(mdev);
+	mic_free_interrupts(mdev, pdev);
+	iounmap(mdev->mmio.va);
+	iounmap(mdev->aper.va);
+	mic_device_uninit(mdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	ida_simple_remove(&g_mic_ida, mdev->id);
+	kfree(mdev);
+}
+static struct pci_driver mic_driver = {
+	.name = mic_driver_name,
+	.id_table = mic_pci_tbl,
+	.probe = mic_probe,
+	.remove = mic_remove
+};
+
+static int __init mic_init(void)
+{
+	int ret;
+
+	ret = alloc_chrdev_region(&g_mic_devno, 0,
+		MIC_MAX_NUM_DEVS, mic_driver_name);
+	if (ret) {
+		pr_err("alloc_chrdev_region failed ret %d\n", ret);
+		goto error;
+	}
+
+	g_mic_class = class_create(THIS_MODULE, mic_driver_name);
+	if (IS_ERR(g_mic_class)) {
+		ret = PTR_ERR(g_mic_class);
+		pr_err("class_create failed ret %d\n", ret);
+		goto cleanup_chrdev;
+	}
+
+	mic_init_debugfs();
+	ida_init(&g_mic_ida);
+	ret = pci_register_driver(&mic_driver);
+	if (ret) {
+		pr_err("pci_register_driver failed ret %d\n", ret);
+		goto cleanup_debugfs;
+	}
+	return ret;
+cleanup_debugfs:
+	mic_exit_debugfs();
+	class_destroy(g_mic_class);
+cleanup_chrdev:
+	unregister_chrdev_region(g_mic_devno, MIC_MAX_NUM_DEVS);
+error:
+	return ret;
+}
+
+static void __exit mic_exit(void)
+{
+	pci_unregister_driver(&mic_driver);
+	ida_destroy(&g_mic_ida);
+	mic_exit_debugfs();
+	class_destroy(g_mic_class);
+	unregister_chrdev_region(g_mic_devno, MIC_MAX_NUM_DEVS);
+}
+
+module_init(mic_init);
+module_exit(mic_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) MIC X100 Host driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/mic/host/mic_smpt.c b/drivers/misc/mic/host/mic_smpt.c
new file mode 100644
index 0000000..fae474c
--- /dev/null
+++ b/drivers/misc/mic/host/mic_smpt.c
@@ -0,0 +1,442 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/pci.h>
+
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_smpt.h"
+
+static inline u64 mic_system_page_mask(struct mic_device *mdev)
+{
+	return (1ULL << mdev->smpt->info.page_shift) - 1ULL;
+}
+
+static inline u8 mic_sys_addr_to_smpt(struct mic_device *mdev, dma_addr_t pa)
+{
+	return (pa - mdev->smpt->info.base) >> mdev->smpt->info.page_shift;
+}
+
+static inline u64 mic_smpt_to_pa(struct mic_device *mdev, u8 index)
+{
+	return mdev->smpt->info.base + (index * mdev->smpt->info.page_size);
+}
+
+static inline u64 mic_smpt_offset(struct mic_device *mdev, dma_addr_t pa)
+{
+	return pa & mic_system_page_mask(mdev);
+}
+
+static inline u64 mic_smpt_align_low(struct mic_device *mdev, dma_addr_t pa)
+{
+	return ALIGN(pa - mic_system_page_mask(mdev),
+		mdev->smpt->info.page_size);
+}
+
+static inline u64 mic_smpt_align_high(struct mic_device *mdev, dma_addr_t pa)
+{
+	return ALIGN(pa, mdev->smpt->info.page_size);
+}
+
+/* Total Cumulative system memory accessible by MIC across all SMPT entries */
+static inline u64 mic_max_system_memory(struct mic_device *mdev)
+{
+	return mdev->smpt->info.num_reg * mdev->smpt->info.page_size;
+}
+
+/* Maximum system memory address accessible by MIC */
+static inline u64 mic_max_system_addr(struct mic_device *mdev)
+{
+	return mdev->smpt->info.base + mic_max_system_memory(mdev) - 1ULL;
+}
+
+/* Check if the DMA address is a MIC system memory address */
+static inline bool
+mic_is_system_addr(struct mic_device *mdev, dma_addr_t pa)
+{
+	return pa >= mdev->smpt->info.base && pa <= mic_max_system_addr(mdev);
+}
+
+/* Populate an SMPT entry and update the reference counts. */
+static void mic_add_smpt_entry(int spt, s64 *ref, u64 addr,
+		int entries, struct mic_device *mdev)
+{
+	struct mic_smpt_info *smpt_info = mdev->smpt;
+	int i;
+
+	for (i = spt; i < spt + entries; i++,
+		addr += smpt_info->info.page_size) {
+		if (!smpt_info->entry[i].ref_count &&
+		    (smpt_info->entry[i].dma_addr != addr)) {
+			mdev->smpt_ops->set(mdev, addr, i);
+			smpt_info->entry[i].dma_addr = addr;
+		}
+		smpt_info->entry[i].ref_count += ref[i - spt];
+	}
+}
+
+/*
+ * Find an available MIC address in MIC SMPT address space
+ * for a given DMA address and size.
+ */
+static dma_addr_t mic_smpt_op(struct mic_device *mdev, u64 dma_addr,
+				int entries, s64 *ref, size_t size)
+{
+	int spt;
+	int ae = 0;
+	int i;
+	unsigned long flags;
+	dma_addr_t mic_addr = 0;
+	dma_addr_t addr = dma_addr;
+	struct mic_smpt_info *smpt_info = mdev->smpt;
+
+	spin_lock_irqsave(&smpt_info->smpt_lock, flags);
+
+	/* find existing entries */
+	for (i = 0; i < smpt_info->info.num_reg; i++) {
+		if (smpt_info->entry[i].dma_addr == addr) {
+			ae++;
+			addr += smpt_info->info.page_size;
+		} else if (ae) /* cannot find contiguous entries */
+			goto not_found;
+
+		if (ae == entries)
+			goto found;
+	}
+
+	/* find free entry */
+	for (ae = 0, i = 0; i < smpt_info->info.num_reg; i++) {
+		ae = (smpt_info->entry[i].ref_count == 0) ? ae + 1 : 0;
+		if (ae == entries)
+			goto found;
+	}
+
+not_found:
+	spin_unlock_irqrestore(&smpt_info->smpt_lock, flags);
+	return mic_addr;
+
+found:
+	spt = i - entries + 1;
+	mic_addr = mic_smpt_to_pa(mdev, spt);
+	mic_add_smpt_entry(spt, ref, dma_addr, entries, mdev);
+	smpt_info->map_count++;
+	smpt_info->ref_count += (s64)size;
+	spin_unlock_irqrestore(&smpt_info->smpt_lock, flags);
+	return mic_addr;
+}
+
+/*
+ * Returns number of smpt entries needed for dma_addr to dma_addr + size
+ * also returns the reference count array for each of those entries
+ * and the starting smpt address
+ */
+static int mic_get_smpt_ref_count(struct mic_device *mdev, dma_addr_t dma_addr,
+				size_t size, s64 *ref,  u64 *smpt_start)
+{
+	u64 start =  dma_addr;
+	u64 end = dma_addr + size;
+	int i = 0;
+
+	while (start < end) {
+		ref[i++] = min(mic_smpt_align_high(mdev, start + 1),
+			end) - start;
+		start = mic_smpt_align_high(mdev, start + 1);
+	}
+
+	if (smpt_start)
+		*smpt_start = mic_smpt_align_low(mdev, dma_addr);
+
+	return i;
+}
+
+/*
+ * mic_to_dma_addr - Converts a MIC address to a DMA address.
+ *
+ * @mdev: pointer to mic_device instance.
+ * @mic_addr: MIC address.
+ *
+ * returns a DMA address.
+ */
+static dma_addr_t
+mic_to_dma_addr(struct mic_device *mdev, dma_addr_t mic_addr)
+{
+	struct mic_smpt_info *smpt_info = mdev->smpt;
+	int spt;
+	dma_addr_t dma_addr;
+
+	if (!mic_is_system_addr(mdev, mic_addr)) {
+		dev_err(mdev->sdev->parent,
+			"mic_addr is invalid. mic_addr = 0x%llx\n", mic_addr);
+		return -EINVAL;
+	}
+	spt = mic_sys_addr_to_smpt(mdev, mic_addr);
+	dma_addr = smpt_info->entry[spt].dma_addr +
+		mic_smpt_offset(mdev, mic_addr);
+	return dma_addr;
+}
+
+/**
+ * mic_map - Maps a DMA address to a MIC physical address.
+ *
+ * @mdev: pointer to mic_device instance.
+ * @dma_addr: DMA address.
+ * @size: Size of the region to be mapped.
+ *
+ * This API converts the DMA address provided to a DMA address understood
+ * by MIC. Caller should check for errors by calling mic_map_error(..).
+ *
+ * returns DMA address as required by MIC.
+ */
+dma_addr_t mic_map(struct mic_device *mdev, dma_addr_t dma_addr, size_t size)
+{
+	dma_addr_t mic_addr = 0;
+	int num_entries;
+	s64 *ref;
+	u64 smpt_start;
+
+	if (!size || size > mic_max_system_memory(mdev))
+		return mic_addr;
+
+	ref = kmalloc(mdev->smpt->info.num_reg * sizeof(s64), GFP_KERNEL);
+	if (!ref)
+		return mic_addr;
+
+	num_entries = mic_get_smpt_ref_count(mdev, dma_addr, size,
+		ref, &smpt_start);
+
+	/* Set the smpt table appropriately and get 16G aligned mic address */
+	mic_addr = mic_smpt_op(mdev, smpt_start, num_entries, ref, size);
+
+	kfree(ref);
+
+	/*
+	 * If mic_addr is zero then its an error case
+	 * since mic_addr can never be zero.
+	 * else generate mic_addr by adding the 16G offset in dma_addr
+	 */
+	if (!mic_addr && MIC_FAMILY_X100 == mdev->family) {
+		dev_err(mdev->sdev->parent,
+			"mic_map failed dma_addr 0x%llx size 0x%lx\n",
+			dma_addr, size);
+		return mic_addr;
+	} else {
+		return mic_addr + mic_smpt_offset(mdev, dma_addr);
+	}
+}
+
+/**
+ * mic_unmap - Unmaps a MIC physical address.
+ *
+ * @mdev: pointer to mic_device instance.
+ * @mic_addr: MIC physical address.
+ * @size: Size of the region to be unmapped.
+ *
+ * This API unmaps the mappings created by mic_map(..).
+ *
+ * returns None.
+ */
+void mic_unmap(struct mic_device *mdev, dma_addr_t mic_addr, size_t size)
+{
+	struct mic_smpt_info *smpt_info = mdev->smpt;
+	s64 *ref;
+	int num_smpt;
+	int spt;
+	int i;
+	unsigned long flags;
+
+	if (!size)
+		return;
+
+	if (!mic_is_system_addr(mdev, mic_addr)) {
+		dev_err(mdev->sdev->parent,
+			"invalid address: 0x%llx\n", mic_addr);
+		return;
+	}
+
+	spt = mic_sys_addr_to_smpt(mdev, mic_addr);
+	ref = kmalloc(mdev->smpt->info.num_reg * sizeof(s64), GFP_KERNEL);
+	if (!ref)
+		return;
+
+	/* Get number of smpt entries to be mapped, ref count array */
+	num_smpt = mic_get_smpt_ref_count(mdev, mic_addr, size, ref, NULL);
+
+	spin_lock_irqsave(&smpt_info->smpt_lock, flags);
+	smpt_info->unmap_count++;
+	smpt_info->ref_count -= (s64)size;
+
+	for (i = spt; i < spt + num_smpt; i++) {
+		smpt_info->entry[i].ref_count -= ref[i - spt];
+		if (smpt_info->entry[i].ref_count < 0)
+			dev_warn(mdev->sdev->parent,
+				 "ref count for entry %d is negative\n", i);
+	}
+	spin_unlock_irqrestore(&smpt_info->smpt_lock, flags);
+	kfree(ref);
+}
+
+/**
+ * mic_map_single - Maps a virtual address to a MIC physical address.
+ *
+ * @mdev: pointer to mic_device instance.
+ * @va: Kernel direct mapped virtual address.
+ * @size: Size of the region to be mapped.
+ *
+ * This API calls pci_map_single(..) for the direct mapped virtual address
+ * and then converts the DMA address provided to a DMA address understood
+ * by MIC. Caller should check for errors by calling mic_map_error(..).
+ *
+ * returns DMA address as required by MIC.
+ */
+dma_addr_t mic_map_single(struct mic_device *mdev, void *va, size_t size)
+{
+	dma_addr_t mic_addr = 0;
+	struct pci_dev *pdev = container_of(mdev->sdev->parent,
+		struct pci_dev, dev);
+	dma_addr_t dma_addr =
+		pci_map_single(pdev, va, size, PCI_DMA_BIDIRECTIONAL);
+
+	if (!pci_dma_mapping_error(pdev, dma_addr)) {
+		mic_addr = mic_map(mdev, dma_addr, size);
+		if (!mic_addr) {
+			dev_err(mdev->sdev->parent,
+				"mic_map failed dma_addr 0x%llx size 0x%lx\n",
+				dma_addr, size);
+			pci_unmap_single(pdev, dma_addr,
+					 size, PCI_DMA_BIDIRECTIONAL);
+		}
+	}
+	return mic_addr;
+}
+
+/**
+ * mic_unmap_single - Unmaps a MIC physical address.
+ *
+ * @mdev: pointer to mic_device instance.
+ * @mic_addr: MIC physical address.
+ * @size: Size of the region to be unmapped.
+ *
+ * This API unmaps the mappings created by mic_map_single(..).
+ *
+ * returns None.
+ */
+void
+mic_unmap_single(struct mic_device *mdev, dma_addr_t mic_addr, size_t size)
+{
+	struct pci_dev *pdev = container_of(mdev->sdev->parent,
+		struct pci_dev, dev);
+	dma_addr_t dma_addr = mic_to_dma_addr(mdev, mic_addr);
+	mic_unmap(mdev, mic_addr, size);
+	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
+}
+
+/**
+ * mic_smpt_init - Initialize MIC System Memory Page Tables.
+ *
+ * @mdev: pointer to mic_device instance.
+ *
+ * returns 0 for success and -errno for error.
+ */
+int mic_smpt_init(struct mic_device *mdev)
+{
+	int i, err = 0;
+	dma_addr_t dma_addr;
+	struct mic_smpt_info *smpt_info;
+
+	mdev->smpt = kmalloc(sizeof(*mdev->smpt), GFP_KERNEL);
+	if (!mdev->smpt)
+		return -ENOMEM;
+
+	smpt_info = mdev->smpt;
+	mdev->smpt_ops->init(mdev);
+	smpt_info->entry = kmalloc_array(smpt_info->info.num_reg,
+					 sizeof(*smpt_info->entry), GFP_KERNEL);
+	if (!smpt_info->entry) {
+		err = -ENOMEM;
+		goto free_smpt;
+	}
+	spin_lock_init(&smpt_info->smpt_lock);
+	for (i = 0; i < smpt_info->info.num_reg; i++) {
+		dma_addr = i * smpt_info->info.page_size;
+		smpt_info->entry[i].dma_addr = dma_addr;
+		smpt_info->entry[i].ref_count = 0;
+		mdev->smpt_ops->set(mdev, dma_addr, i);
+	}
+	smpt_info->ref_count = 0;
+	smpt_info->map_count = 0;
+	smpt_info->unmap_count = 0;
+	return 0;
+free_smpt:
+	kfree(smpt_info);
+	return err;
+}
+
+/**
+ * mic_smpt_uninit - UnInitialize MIC System Memory Page Tables.
+ *
+ * @mdev: pointer to mic_device instance.
+ *
+ * returns None.
+ */
+void mic_smpt_uninit(struct mic_device *mdev)
+{
+	struct mic_smpt_info *smpt_info = mdev->smpt;
+	int i;
+
+	dev_dbg(mdev->sdev->parent,
+		"nodeid %d SMPT ref count %lld map %lld unmap %lld\n",
+		mdev->id, smpt_info->ref_count,
+		smpt_info->map_count, smpt_info->unmap_count);
+
+	for (i = 0; i < smpt_info->info.num_reg; i++) {
+		dev_dbg(mdev->sdev->parent,
+			"SMPT entry[%d] dma_addr = 0x%llx ref_count = %lld\n",
+			i, smpt_info->entry[i].dma_addr,
+			smpt_info->entry[i].ref_count);
+		if (smpt_info->entry[i].ref_count)
+			dev_warn(mdev->sdev->parent,
+				 "ref count for entry %d is not zero\n", i);
+	}
+	kfree(smpt_info->entry);
+	kfree(smpt_info);
+}
+
+/**
+ * mic_smpt_restore - Restore MIC System Memory Page Tables.
+ *
+ * @mdev: pointer to mic_device instance.
+ *
+ * Restore the SMPT registers to values previously stored in the
+ * SW data structures. Some MIC steppings lose register state
+ * across resets and this API should be called for performing
+ * a restore operation if required.
+ *
+ * returns None.
+ */
+void mic_smpt_restore(struct mic_device *mdev)
+{
+	int i;
+	dma_addr_t dma_addr;
+
+	for (i = 0; i < mdev->smpt->info.num_reg; i++) {
+		dma_addr = mdev->smpt->entry[i].dma_addr;
+		mdev->smpt_ops->set(mdev, dma_addr, i);
+	}
+}
diff --git a/drivers/misc/mic/host/mic_smpt.h b/drivers/misc/mic/host/mic_smpt.h
new file mode 100644
index 0000000..51970ab
--- /dev/null
+++ b/drivers/misc/mic/host/mic_smpt.h
@@ -0,0 +1,98 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#ifndef MIC_SMPT_H
+#define MIC_SMPT_H
+/**
+ * struct mic_smpt_ops - MIC HW specific SMPT operations.
+ * @init: Initialize hardware specific SMPT information in mic_smpt_hw_info.
+ * @set: Set the value for a particular SMPT entry.
+ */
+struct mic_smpt_ops {
+	void (*init)(struct mic_device *mdev);
+	void (*set)(struct mic_device *mdev, dma_addr_t dma_addr, u8 index);
+};
+
+/**
+ * struct mic_smpt - MIC SMPT entry information.
+ * @dma_addr: Base DMA address for this SMPT entry.
+ * @ref_count: Number of active mappings for this SMPT entry in bytes.
+ */
+struct mic_smpt {
+	dma_addr_t dma_addr;
+	s64 ref_count;
+};
+
+/**
+ * struct mic_smpt_hw_info - MIC SMPT hardware specific information.
+ * @num_reg: Number of SMPT registers.
+ * @page_shift: System memory page shift.
+ * @page_size: System memory page size.
+ * @base: System address base.
+ */
+struct mic_smpt_hw_info {
+	u8 num_reg;
+	u8 page_shift;
+	u64 page_size;
+	u64 base;
+};
+
+/**
+ * struct mic_smpt_info - MIC SMPT information.
+ * @entry: Array of SMPT entries.
+ * @smpt_lock: Spin lock protecting access to SMPT data structures.
+ * @info: Hardware specific SMPT information.
+ * @ref_count: Number of active SMPT mappings (for debug).
+ * @map_count: Number of SMPT mappings created (for debug).
+ * @unmap_count: Number of SMPT mappings destroyed (for debug).
+ */
+struct mic_smpt_info {
+	struct mic_smpt *entry;
+	spinlock_t smpt_lock;
+	struct mic_smpt_hw_info info;
+	s64 ref_count;
+	s64 map_count;
+	s64 unmap_count;
+};
+
+dma_addr_t mic_map_single(struct mic_device *mdev, void *va, size_t size);
+void mic_unmap_single(struct mic_device *mdev,
+	dma_addr_t mic_addr, size_t size);
+dma_addr_t mic_map(struct mic_device *mdev,
+	dma_addr_t dma_addr, size_t size);
+void mic_unmap(struct mic_device *mdev, dma_addr_t mic_addr, size_t size);
+
+/**
+ * mic_map_error - Check a MIC address for errors.
+ *
+ * @mdev: pointer to mic_device instance.
+ *
+ * returns Whether there was an error during mic_map..(..) APIs.
+ */
+static inline bool mic_map_error(dma_addr_t mic_addr)
+{
+	return !mic_addr;
+}
+
+int mic_smpt_init(struct mic_device *mdev);
+void mic_smpt_uninit(struct mic_device *mdev);
+void mic_smpt_restore(struct mic_device *mdev);
+
+#endif
diff --git a/drivers/misc/mic/host/mic_sysfs.c b/drivers/misc/mic/host/mic_sysfs.c
new file mode 100644
index 0000000..6dd864e
--- /dev/null
+++ b/drivers/misc/mic/host/mic_sysfs.c
@@ -0,0 +1,459 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/pci.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+
+/*
+ * A state-to-string lookup table, for exposing a human readable state
+ * via sysfs. Always keep in sync with enum mic_states
+ */
+static const char * const mic_state_string[] = {
+	[MIC_OFFLINE] = "offline",
+	[MIC_ONLINE] = "online",
+	[MIC_SHUTTING_DOWN] = "shutting_down",
+	[MIC_RESET_FAILED] = "reset_failed",
+	[MIC_SUSPENDING] = "suspending",
+	[MIC_SUSPENDED] = "suspended",
+};
+
+/*
+ * A shutdown-status-to-string lookup table, for exposing a human
+ * readable state via sysfs. Always keep in sync with enum mic_shutdown_status
+ */
+static const char * const mic_shutdown_status_string[] = {
+	[MIC_NOP] = "nop",
+	[MIC_CRASHED] = "crashed",
+	[MIC_HALTED] = "halted",
+	[MIC_POWER_OFF] = "poweroff",
+	[MIC_RESTART] = "restart",
+};
+
+void mic_set_shutdown_status(struct mic_device *mdev, u8 shutdown_status)
+{
+	dev_dbg(mdev->sdev->parent, "Shutdown Status %s -> %s\n",
+		mic_shutdown_status_string[mdev->shutdown_status],
+		mic_shutdown_status_string[shutdown_status]);
+	mdev->shutdown_status = shutdown_status;
+}
+
+void mic_set_state(struct mic_device *mdev, u8 state)
+{
+	dev_dbg(mdev->sdev->parent, "State %s -> %s\n",
+		mic_state_string[mdev->state],
+		mic_state_string[state]);
+	mdev->state = state;
+	sysfs_notify_dirent(mdev->state_sysfs);
+}
+
+static ssize_t
+family_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	static const char x100[] = "x100";
+	static const char unknown[] = "Unknown";
+	const char *card = NULL;
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev)
+		return -EINVAL;
+
+	switch (mdev->family) {
+	case MIC_FAMILY_X100:
+		card = x100;
+		break;
+	default:
+		card = unknown;
+		break;
+	}
+	return scnprintf(buf, PAGE_SIZE, "%s\n", card);
+}
+static DEVICE_ATTR_RO(family);
+
+static ssize_t
+stepping_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	char *string = "??";
+
+	if (!mdev)
+		return -EINVAL;
+
+	switch (mdev->stepping) {
+	case MIC_A0_STEP:
+		string = "A0";
+		break;
+	case MIC_B0_STEP:
+		string = "B0";
+		break;
+	case MIC_B1_STEP:
+		string = "B1";
+		break;
+	case MIC_C0_STEP:
+		string = "C0";
+		break;
+	default:
+		break;
+	}
+	return scnprintf(buf, PAGE_SIZE, "%s\n", string);
+}
+static DEVICE_ATTR_RO(stepping);
+
+static ssize_t
+state_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev || mdev->state >= MIC_LAST)
+		return -EINVAL;
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n",
+		mic_state_string[mdev->state]);
+}
+
+static ssize_t
+state_store(struct device *dev, struct device_attribute *attr,
+	    const char *buf, size_t count)
+{
+	int rc = 0;
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	if (!mdev)
+		return -EINVAL;
+	if (sysfs_streq(buf, "boot")) {
+		rc = mic_start(mdev, buf);
+		if (rc) {
+			dev_err(mdev->sdev->parent,
+				"mic_boot failed rc %d\n", rc);
+			count = rc;
+		}
+		goto done;
+	}
+
+	if (sysfs_streq(buf, "reset")) {
+		schedule_work(&mdev->reset_trigger_work);
+		goto done;
+	}
+
+	if (sysfs_streq(buf, "shutdown")) {
+		mic_shutdown(mdev);
+		goto done;
+	}
+
+	if (sysfs_streq(buf, "suspend")) {
+		mic_suspend(mdev);
+		goto done;
+	}
+
+	count = -EINVAL;
+done:
+	return count;
+}
+static DEVICE_ATTR_RW(state);
+
+static ssize_t shutdown_status_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev || mdev->shutdown_status >= MIC_STATUS_LAST)
+		return -EINVAL;
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n",
+		mic_shutdown_status_string[mdev->shutdown_status]);
+}
+static DEVICE_ATTR_RO(shutdown_status);
+
+static ssize_t
+cmdline_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	char *cmdline;
+
+	if (!mdev)
+		return -EINVAL;
+
+	cmdline = mdev->cmdline;
+
+	if (cmdline)
+		return scnprintf(buf, PAGE_SIZE, "%s\n", cmdline);
+	return 0;
+}
+
+static ssize_t
+cmdline_store(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev)
+		return -EINVAL;
+
+	mutex_lock(&mdev->mic_mutex);
+	kfree(mdev->cmdline);
+
+	mdev->cmdline = kmalloc(count + 1, GFP_KERNEL);
+	if (!mdev->cmdline) {
+		count = -ENOMEM;
+		goto unlock;
+	}
+
+	strncpy(mdev->cmdline, buf, count);
+
+	if (mdev->cmdline[count - 1] == '\n')
+		mdev->cmdline[count - 1] = '\0';
+	else
+		mdev->cmdline[count] = '\0';
+unlock:
+	mutex_unlock(&mdev->mic_mutex);
+	return count;
+}
+static DEVICE_ATTR_RW(cmdline);
+
+static ssize_t
+firmware_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	char *firmware;
+
+	if (!mdev)
+		return -EINVAL;
+
+	firmware = mdev->firmware;
+
+	if (firmware)
+		return scnprintf(buf, PAGE_SIZE, "%s\n", firmware);
+	return 0;
+}
+
+static ssize_t
+firmware_store(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev)
+		return -EINVAL;
+
+	mutex_lock(&mdev->mic_mutex);
+	kfree(mdev->firmware);
+
+	mdev->firmware = kmalloc(count + 1, GFP_KERNEL);
+	if (!mdev->firmware) {
+		count = -ENOMEM;
+		goto unlock;
+	}
+	strncpy(mdev->firmware, buf, count);
+
+	if (mdev->firmware[count - 1] == '\n')
+		mdev->firmware[count - 1] = '\0';
+	else
+		mdev->firmware[count] = '\0';
+unlock:
+	mutex_unlock(&mdev->mic_mutex);
+	return count;
+}
+static DEVICE_ATTR_RW(firmware);
+
+static ssize_t
+ramdisk_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	char *ramdisk;
+
+	if (!mdev)
+		return -EINVAL;
+
+	ramdisk = mdev->ramdisk;
+
+	if (ramdisk)
+		return scnprintf(buf, PAGE_SIZE, "%s\n", ramdisk);
+	return 0;
+}
+
+static ssize_t
+ramdisk_store(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev)
+		return -EINVAL;
+
+	mutex_lock(&mdev->mic_mutex);
+	kfree(mdev->ramdisk);
+
+	mdev->ramdisk = kmalloc(count + 1, GFP_KERNEL);
+	if (!mdev->ramdisk) {
+		count = -ENOMEM;
+		goto unlock;
+	}
+
+	strncpy(mdev->ramdisk, buf, count);
+
+	if (mdev->ramdisk[count - 1] == '\n')
+		mdev->ramdisk[count - 1] = '\0';
+	else
+		mdev->ramdisk[count] = '\0';
+unlock:
+	mutex_unlock(&mdev->mic_mutex);
+	return count;
+}
+static DEVICE_ATTR_RW(ramdisk);
+
+static ssize_t
+bootmode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	char *bootmode;
+
+	if (!mdev)
+		return -EINVAL;
+
+	bootmode = mdev->bootmode;
+
+	if (bootmode)
+		return scnprintf(buf, PAGE_SIZE, "%s\n", bootmode);
+	return 0;
+}
+
+static ssize_t
+bootmode_store(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev)
+		return -EINVAL;
+
+	if (!sysfs_streq(buf, "linux") && !sysfs_streq(buf, "elf"))
+		return -EINVAL;
+
+	mutex_lock(&mdev->mic_mutex);
+	kfree(mdev->bootmode);
+
+	mdev->bootmode = kmalloc(count + 1, GFP_KERNEL);
+	if (!mdev->bootmode) {
+		count = -ENOMEM;
+		goto unlock;
+	}
+
+	strncpy(mdev->bootmode, buf, count);
+
+	if (mdev->bootmode[count - 1] == '\n')
+		mdev->bootmode[count - 1] = '\0';
+	else
+		mdev->bootmode[count] = '\0';
+unlock:
+	mutex_unlock(&mdev->mic_mutex);
+	return count;
+}
+static DEVICE_ATTR_RW(bootmode);
+
+static ssize_t
+log_buf_addr_show(struct device *dev, struct device_attribute *attr,
+		  char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev)
+		return -EINVAL;
+
+	return scnprintf(buf, PAGE_SIZE, "%p\n", mdev->log_buf_addr);
+}
+
+static ssize_t
+log_buf_addr_store(struct device *dev, struct device_attribute *attr,
+		   const char *buf, size_t count)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	int ret;
+	unsigned long addr;
+
+	if (!mdev)
+		return -EINVAL;
+
+	ret = kstrtoul(buf, 16, &addr);
+	if (ret)
+		goto exit;
+
+	mdev->log_buf_addr = (void *)addr;
+	ret = count;
+exit:
+	return ret;
+}
+static DEVICE_ATTR_RW(log_buf_addr);
+
+static ssize_t
+log_buf_len_show(struct device *dev, struct device_attribute *attr,
+		 char *buf)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+
+	if (!mdev)
+		return -EINVAL;
+
+	return scnprintf(buf, PAGE_SIZE, "%p\n", mdev->log_buf_len);
+}
+
+static ssize_t
+log_buf_len_store(struct device *dev, struct device_attribute *attr,
+		  const char *buf, size_t count)
+{
+	struct mic_device *mdev = dev_get_drvdata(dev->parent);
+	int ret;
+	unsigned long addr;
+
+	if (!mdev)
+		return -EINVAL;
+
+	ret = kstrtoul(buf, 16, &addr);
+	if (ret)
+		goto exit;
+
+	mdev->log_buf_len = (int *)addr;
+	ret = count;
+exit:
+	return ret;
+}
+static DEVICE_ATTR_RW(log_buf_len);
+
+static struct attribute *mic_default_attrs[] = {
+	&dev_attr_family.attr,
+	&dev_attr_stepping.attr,
+	&dev_attr_state.attr,
+	&dev_attr_shutdown_status.attr,
+	&dev_attr_cmdline.attr,
+	&dev_attr_firmware.attr,
+	&dev_attr_ramdisk.attr,
+	&dev_attr_bootmode.attr,
+	&dev_attr_log_buf_addr.attr,
+	&dev_attr_log_buf_len.attr,
+
+	NULL
+};
+
+ATTRIBUTE_GROUPS(mic_default);
+
+void mic_sysfs_init(struct mic_device *mdev)
+{
+	mdev->attr_group = mic_default_groups;
+}
diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c
new file mode 100644
index 0000000..5b8494b
--- /dev/null
+++ b/drivers/misc/mic/host/mic_virtio.c
@@ -0,0 +1,700 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_smpt.h"
+#include "mic_virtio.h"
+
+/*
+ * Initiates the copies across the PCIe bus from card memory to
+ * a user space buffer.
+ */
+static int mic_virtio_copy_to_user(struct mic_vdev *mvdev,
+		void __user *ubuf, size_t len, u64 addr)
+{
+	int err;
+	void __iomem *dbuf = mvdev->mdev->aper.va + addr;
+	/*
+	 * We are copying from IO below an should ideally use something
+	 * like copy_to_user_fromio(..) if it existed.
+	 */
+	if (copy_to_user(ubuf, dbuf, len)) {
+		err = -EFAULT;
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+		goto err;
+	}
+	mvdev->in_bytes += len;
+	err = 0;
+err:
+	return err;
+}
+
+/*
+ * Initiates copies across the PCIe bus from a user space
+ * buffer to card memory.
+ */
+static int mic_virtio_copy_from_user(struct mic_vdev *mvdev,
+		void __user *ubuf, size_t len, u64 addr)
+{
+	int err;
+	void __iomem *dbuf = mvdev->mdev->aper.va + addr;
+	/*
+	 * We are copying to IO below and should ideally use something
+	 * like copy_from_user_toio(..) if it existed.
+	 */
+	if (copy_from_user(dbuf, ubuf, len)) {
+		err = -EFAULT;
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+		goto err;
+	}
+	mvdev->out_bytes += len;
+	err = 0;
+err:
+	return err;
+}
+
+#define MIC_VRINGH_READ true
+
+/* The function to call to notify the card about added buffers */
+static void mic_notify(struct vringh *vrh)
+{
+	struct mic_vringh *mvrh = container_of(vrh, struct mic_vringh, vrh);
+	struct mic_vdev *mvdev = mvrh->mvdev;
+	s8 db = mvdev->dc->h2c_vdev_db;
+
+	if (db != -1)
+		mvdev->mdev->ops->send_intr(mvdev->mdev, db);
+}
+
+/* Determine the total number of bytes consumed in a VRINGH KIOV */
+static inline u32 mic_vringh_iov_consumed(struct vringh_kiov *iov)
+{
+	int i;
+	u32 total = iov->consumed;
+
+	for (i = 0; i < iov->i; i++)
+		total += iov->iov[i].iov_len;
+	return total;
+}
+
+/*
+ * Traverse the VRINGH KIOV and issue the APIs to trigger the copies.
+ * This API is heavily based on the vringh_iov_xfer(..) implementation
+ * in vringh.c. The reason we cannot reuse vringh_iov_pull_kern(..)
+ * and vringh_iov_push_kern(..) directly is because there is no
+ * way to override the VRINGH xfer(..) routines as of v3.10.
+ */
+static int mic_vringh_copy(struct mic_vdev *mvdev, struct vringh_kiov *iov,
+	void __user *ubuf, size_t len, bool read, size_t *out_len)
+{
+	int ret = 0;
+	size_t partlen, tot_len = 0;
+
+	while (len && iov->i < iov->used) {
+		partlen = min(iov->iov[iov->i].iov_len, len);
+		if (read)
+			ret = mic_virtio_copy_to_user(mvdev,
+				ubuf, partlen,
+				(u64)iov->iov[iov->i].iov_base);
+		else
+			ret = mic_virtio_copy_from_user(mvdev,
+				ubuf, partlen,
+				(u64)iov->iov[iov->i].iov_base);
+		if (ret) {
+			dev_err(mic_dev(mvdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			break;
+		}
+		len -= partlen;
+		ubuf += partlen;
+		tot_len += partlen;
+		iov->consumed += partlen;
+		iov->iov[iov->i].iov_len -= partlen;
+		iov->iov[iov->i].iov_base += partlen;
+		if (!iov->iov[iov->i].iov_len) {
+			/* Fix up old iov element then increment. */
+			iov->iov[iov->i].iov_len = iov->consumed;
+			iov->iov[iov->i].iov_base -= iov->consumed;
+
+			iov->consumed = 0;
+			iov->i++;
+		}
+	}
+	*out_len = tot_len;
+	return ret;
+}
+
+/*
+ * Use the standard VRINGH infrastructure in the kernel to fetch new
+ * descriptors, initiate the copies and update the used ring.
+ */
+static int _mic_virtio_copy(struct mic_vdev *mvdev,
+	struct mic_copy_desc *copy)
+{
+	int ret = 0, iovcnt = copy->iovcnt;
+	struct iovec iov;
+	struct iovec __user *u_iov = copy->iov;
+	void __user *ubuf = NULL;
+	struct mic_vringh *mvr = &mvdev->mvr[copy->vr_idx];
+	struct vringh_kiov *riov = &mvr->riov;
+	struct vringh_kiov *wiov = &mvr->wiov;
+	struct vringh *vrh = &mvr->vrh;
+	u16 *head = &mvr->head;
+	struct mic_vring *vr = &mvr->vring;
+	size_t len = 0, out_len;
+
+	copy->out_len = 0;
+	/* Fetch a new IOVEC if all previous elements have been processed */
+	if (riov->i == riov->used && wiov->i == wiov->used) {
+		ret = vringh_getdesc_kern(vrh, riov, wiov,
+				head, GFP_KERNEL);
+		/* Check if there are available descriptors */
+		if (ret <= 0)
+			return ret;
+	}
+	while (iovcnt) {
+		if (!len) {
+			/* Copy over a new iovec from user space. */
+			ret = copy_from_user(&iov, u_iov, sizeof(*u_iov));
+			if (ret) {
+				ret = -EINVAL;
+				dev_err(mic_dev(mvdev), "%s %d err %d\n",
+					__func__, __LINE__, ret);
+				break;
+			}
+			len = iov.iov_len;
+			ubuf = iov.iov_base;
+		}
+		/* Issue all the read descriptors first */
+		ret = mic_vringh_copy(mvdev, riov, ubuf, len,
+			MIC_VRINGH_READ, &out_len);
+		if (ret) {
+			dev_err(mic_dev(mvdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			break;
+		}
+		len -= out_len;
+		ubuf += out_len;
+		copy->out_len += out_len;
+		/* Issue the write descriptors next */
+		ret = mic_vringh_copy(mvdev, wiov, ubuf, len,
+			!MIC_VRINGH_READ, &out_len);
+		if (ret) {
+			dev_err(mic_dev(mvdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			break;
+		}
+		len -= out_len;
+		ubuf += out_len;
+		copy->out_len += out_len;
+		if (!len) {
+			/* One user space iovec is now completed */
+			iovcnt--;
+			u_iov++;
+		}
+		/* Exit loop if all elements in KIOVs have been processed. */
+		if (riov->i == riov->used && wiov->i == wiov->used)
+			break;
+	}
+	/*
+	 * Update the used ring if a descriptor was available and some data was
+	 * copied in/out and the user asked for a used ring update.
+	 */
+	if (*head != USHRT_MAX && copy->out_len && copy->update_used) {
+		u32 total = 0;
+
+		/* Determine the total data consumed */
+		total += mic_vringh_iov_consumed(riov);
+		total += mic_vringh_iov_consumed(wiov);
+		vringh_complete_kern(vrh, *head, total);
+		*head = USHRT_MAX;
+		if (vringh_need_notify_kern(vrh) > 0)
+			vringh_notify(vrh);
+		vringh_kiov_cleanup(riov);
+		vringh_kiov_cleanup(wiov);
+		/* Update avail idx for user space */
+		vr->info->avail_idx = vrh->last_avail_idx;
+	}
+	return ret;
+}
+
+static inline int mic_verify_copy_args(struct mic_vdev *mvdev,
+		struct mic_copy_desc *copy)
+{
+	if (copy->vr_idx >= mvdev->dd->num_vq) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, -EINVAL);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Copy a specified number of virtio descriptors in a chain */
+int mic_virtio_copy_desc(struct mic_vdev *mvdev,
+		struct mic_copy_desc *copy)
+{
+	int err;
+	struct mic_vringh *mvr = &mvdev->mvr[copy->vr_idx];
+
+	err = mic_verify_copy_args(mvdev, copy);
+	if (err)
+		return err;
+
+	mutex_lock(&mvr->vr_mutex);
+	if (!mic_vdevup(mvdev)) {
+		err = -ENODEV;
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+		goto err;
+	}
+	err = _mic_virtio_copy(mvdev, copy);
+	if (err) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+	}
+err:
+	mutex_unlock(&mvr->vr_mutex);
+	return err;
+}
+
+static void mic_virtio_init_post(struct mic_vdev *mvdev)
+{
+	struct mic_vqconfig *vqconfig = mic_vq_config(mvdev->dd);
+	int i;
+
+	for (i = 0; i < mvdev->dd->num_vq; i++) {
+		if (!le64_to_cpu(vqconfig[i].used_address)) {
+			dev_warn(mic_dev(mvdev), "used_address zero??\n");
+			continue;
+		}
+		mvdev->mvr[i].vrh.vring.used =
+			mvdev->mdev->aper.va +
+			le64_to_cpu(vqconfig[i].used_address);
+	}
+
+	mvdev->dc->used_address_updated = 0;
+
+	dev_dbg(mic_dev(mvdev), "%s: device type %d LINKUP\n",
+		__func__, mvdev->virtio_id);
+}
+
+static inline void mic_virtio_device_reset(struct mic_vdev *mvdev)
+{
+	int i;
+
+	dev_dbg(mic_dev(mvdev), "%s: status %d device type %d RESET\n",
+		__func__, mvdev->dd->status, mvdev->virtio_id);
+
+	for (i = 0; i < mvdev->dd->num_vq; i++)
+		/*
+		 * Avoid lockdep false positive. The + 1 is for the mic
+		 * mutex which is held in the reset devices code path.
+		 */
+		mutex_lock_nested(&mvdev->mvr[i].vr_mutex, i + 1);
+
+	/* 0 status means "reset" */
+	mvdev->dd->status = 0;
+	mvdev->dc->vdev_reset = 0;
+	mvdev->dc->host_ack = 1;
+
+	for (i = 0; i < mvdev->dd->num_vq; i++) {
+		struct vringh *vrh = &mvdev->mvr[i].vrh;
+		mvdev->mvr[i].vring.info->avail_idx = 0;
+		vrh->completed = 0;
+		vrh->last_avail_idx = 0;
+		vrh->last_used_idx = 0;
+	}
+
+	for (i = 0; i < mvdev->dd->num_vq; i++)
+		mutex_unlock(&mvdev->mvr[i].vr_mutex);
+}
+
+void mic_virtio_reset_devices(struct mic_device *mdev)
+{
+	struct list_head *pos, *tmp;
+	struct mic_vdev *mvdev;
+
+	dev_dbg(mdev->sdev->parent, "%s\n",  __func__);
+
+	list_for_each_safe(pos, tmp, &mdev->vdev_list) {
+		mvdev = list_entry(pos, struct mic_vdev, list);
+		mic_virtio_device_reset(mvdev);
+		mvdev->poll_wake = 1;
+		wake_up(&mvdev->waitq);
+	}
+}
+
+void mic_bh_handler(struct work_struct *work)
+{
+	struct mic_vdev *mvdev = container_of(work, struct mic_vdev,
+			virtio_bh_work);
+
+	if (mvdev->dc->used_address_updated)
+		mic_virtio_init_post(mvdev);
+
+	if (mvdev->dc->vdev_reset)
+		mic_virtio_device_reset(mvdev);
+
+	mvdev->poll_wake = 1;
+	wake_up(&mvdev->waitq);
+}
+
+static irqreturn_t mic_virtio_intr_handler(int irq, void *data)
+{
+	struct mic_vdev *mvdev = data;
+	struct mic_device *mdev = mvdev->mdev;
+
+	mdev->ops->ack_interrupt(mdev);
+	schedule_work(&mvdev->virtio_bh_work);
+	return IRQ_HANDLED;
+}
+
+int mic_virtio_config_change(struct mic_vdev *mvdev,
+			void __user *argp)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret = 0, retry = 100, i;
+	struct mic_bootparam *bootparam = mvdev->mdev->dp;
+	s8 db = bootparam->h2c_config_db;
+
+	mutex_lock(&mvdev->mdev->mic_mutex);
+	for (i = 0; i < mvdev->dd->num_vq; i++)
+		mutex_lock_nested(&mvdev->mvr[i].vr_mutex, i + 1);
+
+	if (db == -1 || mvdev->dd->type == -1) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	if (copy_from_user(mic_vq_configspace(mvdev->dd),
+			   argp, mvdev->dd->config_len)) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, -EFAULT);
+		ret = -EFAULT;
+		goto exit;
+	}
+	mvdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED;
+	mvdev->mdev->ops->send_intr(mvdev->mdev, db);
+
+	for (i = retry; i--;) {
+		ret = wait_event_timeout(wake,
+			mvdev->dc->guest_ack, msecs_to_jiffies(100));
+		if (ret)
+			break;
+	}
+
+	dev_dbg(mic_dev(mvdev),
+		"%s %d retry: %d\n", __func__, __LINE__, retry);
+	mvdev->dc->config_change = 0;
+	mvdev->dc->guest_ack = 0;
+exit:
+	for (i = 0; i < mvdev->dd->num_vq; i++)
+		mutex_unlock(&mvdev->mvr[i].vr_mutex);
+	mutex_unlock(&mvdev->mdev->mic_mutex);
+	return ret;
+}
+
+static int mic_copy_dp_entry(struct mic_vdev *mvdev,
+					void __user *argp,
+					__u8 *type,
+					struct mic_device_desc **devpage)
+{
+	struct mic_device *mdev = mvdev->mdev;
+	struct mic_device_desc dd, *dd_config, *devp;
+	struct mic_vqconfig *vqconfig;
+	int ret = 0, i;
+	bool slot_found = false;
+
+	if (copy_from_user(&dd, argp, sizeof(dd))) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, -EFAULT);
+		return -EFAULT;
+	}
+
+	if (mic_aligned_desc_size(&dd) > MIC_MAX_DESC_BLK_SIZE ||
+	    dd.num_vq > MIC_MAX_VRINGS) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, -EINVAL);
+		return -EINVAL;
+	}
+
+	dd_config = kmalloc(mic_desc_size(&dd), GFP_KERNEL);
+	if (dd_config == NULL) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, -ENOMEM);
+		return -ENOMEM;
+	}
+	if (copy_from_user(dd_config, argp, mic_desc_size(&dd))) {
+		ret = -EFAULT;
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, ret);
+		goto exit;
+	}
+
+	vqconfig = mic_vq_config(dd_config);
+	for (i = 0; i < dd.num_vq; i++) {
+		if (le16_to_cpu(vqconfig[i].num) > MIC_MAX_VRING_ENTRIES) {
+			ret =  -EINVAL;
+			dev_err(mic_dev(mvdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto exit;
+		}
+	}
+
+	/* Find the first free device page entry */
+	for (i = mic_aligned_size(struct mic_bootparam);
+		i < MIC_DP_SIZE - mic_total_desc_size(dd_config);
+		i += mic_total_desc_size(devp)) {
+		devp = mdev->dp + i;
+		if (devp->type == 0 || devp->type == -1) {
+			slot_found = true;
+			break;
+		}
+	}
+	if (!slot_found) {
+		ret =  -EINVAL;
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, ret);
+		goto exit;
+	}
+	/*
+	 * Save off the type before doing the memcpy. Type will be set in the
+	 * end after completing all initialization for the new device.
+	 */
+	*type = dd_config->type;
+	dd_config->type = 0;
+	memcpy(devp, dd_config, mic_desc_size(dd_config));
+
+	*devpage = devp;
+exit:
+	kfree(dd_config);
+	return ret;
+}
+
+static void mic_init_device_ctrl(struct mic_vdev *mvdev,
+				struct mic_device_desc *devpage)
+{
+	struct mic_device_ctrl *dc;
+
+	dc = (void *)devpage + mic_aligned_desc_size(devpage);
+
+	dc->config_change = 0;
+	dc->guest_ack = 0;
+	dc->vdev_reset = 0;
+	dc->host_ack = 0;
+	dc->used_address_updated = 0;
+	dc->c2h_vdev_db = -1;
+	dc->h2c_vdev_db = -1;
+	mvdev->dc = dc;
+}
+
+int mic_virtio_add_device(struct mic_vdev *mvdev,
+			void __user *argp)
+{
+	struct mic_device *mdev = mvdev->mdev;
+	struct mic_device_desc *dd = NULL;
+	struct mic_vqconfig *vqconfig;
+	int vr_size, i, j, ret;
+	u8 type = 0;
+	s8 db;
+	char irqname[10];
+	struct mic_bootparam *bootparam = mdev->dp;
+	u16 num;
+
+	mutex_lock(&mdev->mic_mutex);
+
+	ret = mic_copy_dp_entry(mvdev, argp, &type, &dd);
+	if (ret) {
+		mutex_unlock(&mdev->mic_mutex);
+		return ret;
+	}
+
+	mic_init_device_ctrl(mvdev, dd);
+
+	mvdev->dd = dd;
+	mvdev->virtio_id = type;
+	vqconfig = mic_vq_config(dd);
+	INIT_WORK(&mvdev->virtio_bh_work, mic_bh_handler);
+
+	for (i = 0; i < dd->num_vq; i++) {
+		struct mic_vringh *mvr = &mvdev->mvr[i];
+		struct mic_vring *vr = &mvdev->mvr[i].vring;
+		num = le16_to_cpu(vqconfig[i].num);
+		mutex_init(&mvr->vr_mutex);
+		vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) +
+			sizeof(struct _mic_vring_info));
+		vr->va = (void *)
+			__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+					 get_order(vr_size));
+		if (!vr->va) {
+			ret = -ENOMEM;
+			dev_err(mic_dev(mvdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto err;
+		}
+		vr->len = vr_size;
+		vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN);
+		vr->info->magic = MIC_MAGIC + mvdev->virtio_id + i;
+		vqconfig[i].address = mic_map_single(mdev,
+			vr->va, vr_size);
+		if (mic_map_error(vqconfig[i].address)) {
+			free_pages((unsigned long)vr->va, get_order(vr_size));
+			ret = -ENOMEM;
+			dev_err(mic_dev(mvdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto err;
+		}
+		vqconfig[i].address = cpu_to_le64(vqconfig[i].address);
+
+		vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN);
+		ret = vringh_init_kern(&mvr->vrh,
+			*(u32 *)mic_vq_features(mvdev->dd), num, false,
+			vr->vr.desc, vr->vr.avail, vr->vr.used);
+		if (ret) {
+			dev_err(mic_dev(mvdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto err;
+		}
+		vringh_kiov_init(&mvr->riov, NULL, 0);
+		vringh_kiov_init(&mvr->wiov, NULL, 0);
+		mvr->head = USHRT_MAX;
+		mvr->mvdev = mvdev;
+		mvr->vrh.notify = mic_notify;
+		dev_dbg(mdev->sdev->parent,
+			"%s %d index %d va %p info %p vr_size 0x%x\n",
+			__func__, __LINE__, i, vr->va, vr->info, vr_size);
+	}
+
+	snprintf(irqname, sizeof(irqname), "mic%dvirtio%d", mdev->id,
+		 mvdev->virtio_id);
+	mvdev->virtio_db = mic_next_db(mdev);
+	mvdev->virtio_cookie = mic_request_irq(mdev, mic_virtio_intr_handler,
+			irqname, mvdev, mvdev->virtio_db, MIC_INTR_DB);
+	if (IS_ERR(mvdev->virtio_cookie)) {
+		ret = PTR_ERR(mvdev->virtio_cookie);
+		dev_dbg(mdev->sdev->parent, "request irq failed\n");
+		goto err;
+	}
+
+	mvdev->dc->c2h_vdev_db = mvdev->virtio_db;
+
+	list_add_tail(&mvdev->list, &mdev->vdev_list);
+	/*
+	 * Order the type update with previous stores. This write barrier
+	 * is paired with the corresponding read barrier before the uncached
+	 * system memory read of the type, on the card while scanning the
+	 * device page.
+	 */
+	smp_wmb();
+	dd->type = type;
+
+	dev_dbg(mdev->sdev->parent, "Added virtio device id %d\n", dd->type);
+
+	db = bootparam->h2c_config_db;
+	if (db != -1)
+		mdev->ops->send_intr(mdev, db);
+	mutex_unlock(&mdev->mic_mutex);
+	return 0;
+err:
+	vqconfig = mic_vq_config(dd);
+	for (j = 0; j < i; j++) {
+		struct mic_vringh *mvr = &mvdev->mvr[j];
+		mic_unmap_single(mdev, le64_to_cpu(vqconfig[j].address),
+				 mvr->vring.len);
+		free_pages((unsigned long)mvr->vring.va,
+			   get_order(mvr->vring.len));
+	}
+	mutex_unlock(&mdev->mic_mutex);
+	return ret;
+}
+
+void mic_virtio_del_device(struct mic_vdev *mvdev)
+{
+	struct list_head *pos, *tmp;
+	struct mic_vdev *tmp_mvdev;
+	struct mic_device *mdev = mvdev->mdev;
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int i, ret, retry = 100;
+	struct mic_vqconfig *vqconfig;
+	struct mic_bootparam *bootparam = mdev->dp;
+	s8 db;
+
+	mutex_lock(&mdev->mic_mutex);
+	db = bootparam->h2c_config_db;
+	if (db == -1)
+		goto skip_hot_remove;
+	dev_dbg(mdev->sdev->parent,
+		"Requesting hot remove id %d\n", mvdev->virtio_id);
+	mvdev->dc->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE;
+	mdev->ops->send_intr(mdev, db);
+	for (i = retry; i--;) {
+		ret = wait_event_timeout(wake,
+			mvdev->dc->guest_ack, msecs_to_jiffies(100));
+		if (ret)
+			break;
+	}
+	dev_dbg(mdev->sdev->parent,
+		"Device id %d config_change %d guest_ack %d\n",
+		mvdev->virtio_id, mvdev->dc->config_change,
+		mvdev->dc->guest_ack);
+	mvdev->dc->config_change = 0;
+	mvdev->dc->guest_ack = 0;
+skip_hot_remove:
+	mic_free_irq(mdev, mvdev->virtio_cookie, mvdev);
+	flush_work(&mvdev->virtio_bh_work);
+	vqconfig = mic_vq_config(mvdev->dd);
+	for (i = 0; i < mvdev->dd->num_vq; i++) {
+		struct mic_vringh *mvr = &mvdev->mvr[i];
+		vringh_kiov_cleanup(&mvr->riov);
+		vringh_kiov_cleanup(&mvr->wiov);
+		mic_unmap_single(mdev, le64_to_cpu(vqconfig[i].address),
+				 mvr->vring.len);
+		free_pages((unsigned long)mvr->vring.va,
+			   get_order(mvr->vring.len));
+	}
+
+	list_for_each_safe(pos, tmp, &mdev->vdev_list) {
+		tmp_mvdev = list_entry(pos, struct mic_vdev, list);
+		if (tmp_mvdev == mvdev) {
+			list_del(pos);
+			dev_dbg(mdev->sdev->parent,
+				"Removing virtio device id %d\n",
+				mvdev->virtio_id);
+			break;
+		}
+	}
+	/*
+	 * Order the type update with previous stores. This write barrier
+	 * is paired with the corresponding read barrier before the uncached
+	 * system memory read of the type, on the card while scanning the
+	 * device page.
+	 */
+	smp_wmb();
+	mvdev->dd->type = -1;
+	mutex_unlock(&mdev->mic_mutex);
+}
diff --git a/drivers/misc/mic/host/mic_virtio.h b/drivers/misc/mic/host/mic_virtio.h
new file mode 100644
index 0000000..184f3c8
--- /dev/null
+++ b/drivers/misc/mic/host/mic_virtio.h
@@ -0,0 +1,138 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#ifndef MIC_VIRTIO_H
+#define MIC_VIRTIO_H
+
+#include <linux/virtio_config.h>
+#include <linux/mic_ioctl.h>
+
+/*
+ * Note on endianness.
+ * 1. Host can be both BE or LE
+ * 2. Guest/card is LE. Host uses le_to_cpu to access desc/avail
+ *    rings and ioreadXX/iowriteXX to access used ring.
+ * 3. Device page exposed by host to guest contains LE values. Guest
+ *    accesses these using ioreadXX/iowriteXX etc. This way in general we
+ *    obey the virtio spec according to which guest works with native
+ *    endianness and host is aware of guest endianness and does all
+ *    required endianness conversion.
+ * 4. Data provided from user space to guest (in ADD_DEVICE and
+ *    CONFIG_CHANGE ioctl's) is not interpreted by the driver and should be
+ *    in guest endianness.
+ */
+
+/**
+ * struct mic_vringh - Virtio ring host information.
+ *
+ * @vring: The MIC vring used for setting up user space mappings.
+ * @vrh: The host VRINGH used for accessing the card vrings.
+ * @riov: The VRINGH read kernel IOV.
+ * @wiov: The VRINGH write kernel IOV.
+ * @head: The VRINGH head index address passed to vringh_getdesc_kern(..).
+ * @vr_mutex: Mutex for synchronizing access to the VRING.
+ * @mvdev: Back pointer to MIC virtio device for vringh_notify(..).
+ */
+struct mic_vringh {
+	struct mic_vring vring;
+	struct vringh vrh;
+	struct vringh_kiov riov;
+	struct vringh_kiov wiov;
+	u16 head;
+	struct mutex vr_mutex;
+	struct mic_vdev *mvdev;
+};
+
+/**
+ * struct mic_vdev - Host information for a card Virtio device.
+ *
+ * @virtio_id - Virtio device id.
+ * @waitq - Waitqueue to allow ring3 apps to poll.
+ * @mdev - Back pointer to host MIC device.
+ * @poll_wake - Used for waking up threads blocked in poll.
+ * @out_bytes - Debug stats for number of bytes copied from host to card.
+ * @in_bytes - Debug stats for number of bytes copied from card to host.
+ * @mvr - Store per VRING data structures.
+ * @virtio_bh_work - Work struct used to schedule virtio bottom half handling.
+ * @dd - Virtio device descriptor.
+ * @dc - Virtio device control fields.
+ * @list - List of Virtio devices.
+ * @virtio_db - The doorbell used by the card to interrupt the host.
+ * @virtio_cookie - The cookie returned while requesting interrupts.
+ */
+struct mic_vdev {
+	int virtio_id;
+	wait_queue_head_t waitq;
+	struct mic_device *mdev;
+	int poll_wake;
+	unsigned long out_bytes;
+	unsigned long in_bytes;
+	struct mic_vringh mvr[MIC_MAX_VRINGS];
+	struct work_struct virtio_bh_work;
+	struct mic_device_desc *dd;
+	struct mic_device_ctrl *dc;
+	struct list_head list;
+	int virtio_db;
+	struct mic_irq *virtio_cookie;
+};
+
+void mic_virtio_uninit(struct mic_device *mdev);
+int mic_virtio_add_device(struct mic_vdev *mvdev,
+			void __user *argp);
+void mic_virtio_del_device(struct mic_vdev *mvdev);
+int mic_virtio_config_change(struct mic_vdev *mvdev,
+			void __user *argp);
+int mic_virtio_copy_desc(struct mic_vdev *mvdev,
+	struct mic_copy_desc *request);
+void mic_virtio_reset_devices(struct mic_device *mdev);
+void mic_bh_handler(struct work_struct *work);
+
+/* Helper API to obtain the MIC PCIe device */
+static inline struct device *mic_dev(struct mic_vdev *mvdev)
+{
+	return mvdev->mdev->sdev->parent;
+}
+
+/* Helper API to check if a virtio device is initialized */
+static inline int mic_vdev_inited(struct mic_vdev *mvdev)
+{
+	/* Device has not been created yet */
+	if (!mvdev->dd || !mvdev->dd->type) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, -EINVAL);
+		return -EINVAL;
+	}
+
+	/* Device has been removed/deleted */
+	if (mvdev->dd->type == -1) {
+		dev_err(mic_dev(mvdev), "%s %d err %d\n",
+			__func__, __LINE__, -ENODEV);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/* Helper API to check if a virtio device is running */
+static inline bool mic_vdevup(struct mic_vdev *mvdev)
+{
+	return !!mvdev->dd->status;
+}
+#endif
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c
new file mode 100644
index 0000000..81e9541
--- /dev/null
+++ b/drivers/misc/mic/host/mic_x100.c
@@ -0,0 +1,570 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_x100.h"
+#include "mic_smpt.h"
+
+/**
+ * mic_x100_write_spad - write to the scratchpad register
+ * @mdev: pointer to mic_device instance
+ * @idx: index to the scratchpad register, 0 based
+ * @val: the data value to put into the register
+ *
+ * This function allows writing of a 32bit value to the indexed scratchpad
+ * register.
+ *
+ * RETURNS: none.
+ */
+static void
+mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val)
+{
+	dev_dbg(mdev->sdev->parent, "Writing 0x%x to scratch pad index %d\n",
+		val, idx);
+	mic_mmio_write(&mdev->mmio, val,
+		       MIC_X100_SBOX_BASE_ADDRESS +
+		       MIC_X100_SBOX_SPAD0 + idx * 4);
+}
+
+/**
+ * mic_x100_read_spad - read from the scratchpad register
+ * @mdev: pointer to mic_device instance
+ * @idx: index to scratchpad register, 0 based
+ *
+ * This function allows reading of the 32bit scratchpad register.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static u32
+mic_x100_read_spad(struct mic_device *mdev, unsigned int idx)
+{
+	u32 val = mic_mmio_read(&mdev->mmio,
+		MIC_X100_SBOX_BASE_ADDRESS +
+		MIC_X100_SBOX_SPAD0 + idx * 4);
+
+	dev_dbg(mdev->sdev->parent,
+		"Reading 0x%x from scratch pad index %d\n", val, idx);
+	return val;
+}
+
+/**
+ * mic_x100_enable_interrupts - Enable interrupts.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_enable_interrupts(struct mic_device *mdev)
+{
+	u32 reg;
+	struct mic_mw *mw = &mdev->mmio;
+	u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
+	u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
+
+	reg = mic_mmio_read(mw, sice0);
+	reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff);
+	mic_mmio_write(mw, reg, sice0);
+
+	/*
+	 * Enable auto-clear when enabling interrupts. Applicable only for
+	 * MSI-x. Legacy and MSI mode cannot have auto-clear enabled.
+	 */
+	if (mdev->irq_info.num_vectors > 1) {
+		reg = mic_mmio_read(mw, siac0);
+		reg |= MIC_X100_SBOX_DBR_BITS(0xf) |
+			MIC_X100_SBOX_DMA_BITS(0xff);
+		mic_mmio_write(mw, reg, siac0);
+	}
+}
+
+/**
+ * mic_x100_disable_interrupts - Disable interrupts.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_disable_interrupts(struct mic_device *mdev)
+{
+	u32 reg;
+	struct mic_mw *mw = &mdev->mmio;
+	u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
+	u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
+	u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0;
+
+	reg = mic_mmio_read(mw, sice0);
+	mic_mmio_write(mw, reg, sicc0);
+
+	if (mdev->irq_info.num_vectors > 1) {
+		reg = mic_mmio_read(mw, siac0);
+		reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) |
+			MIC_X100_SBOX_DMA_BITS(0xff));
+		mic_mmio_write(mw, reg, siac0);
+	}
+}
+
+/**
+ * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_send_sbox_intr(struct mic_device *mdev,
+			int doorbell)
+{
+	struct mic_mw *mw = &mdev->mmio;
+	u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8;
+	u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS +
+					apic_icr_offset);
+
+	/* for MIC we need to make sure we "hit" the send_icr bit (13) */
+	apicicr_low = (apicicr_low | (1 << 13));
+
+	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
+	wmb();
+	mic_mmio_write(mw, apicicr_low,
+		       MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
+}
+
+/**
+ * mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_send_rdmasr_intr(struct mic_device *mdev,
+			int doorbell)
+{
+	int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2);
+	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
+	wmb();
+	mic_mmio_write(&mdev->mmio, 0,
+		       MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset);
+}
+
+/**
+ * __mic_x100_send_intr - Send interrupt to MIC.
+ * @mdev: pointer to mic_device instance
+ * @doorbell: doorbell number.
+ */
+static void mic_x100_send_intr(struct mic_device *mdev, int doorbell)
+{
+	int rdmasr_db;
+	if (doorbell < MIC_X100_NUM_SBOX_IRQ) {
+		mic_x100_send_sbox_intr(mdev, doorbell);
+	} else {
+		rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ +
+			MIC_X100_RDMASR_IRQ_BASE;
+		mic_x100_send_rdmasr_intr(mdev, rdmasr_db);
+	}
+}
+
+/**
+ * mic_ack_interrupt - Device specific interrupt handling.
+ * @mdev: pointer to mic_device instance
+ *
+ * Returns: bitmask of doorbell events triggered.
+ */
+static u32 mic_x100_ack_interrupt(struct mic_device *mdev)
+{
+	u32 reg = 0;
+	struct mic_mw *mw = &mdev->mmio;
+	u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0;
+
+	/* Clear pending bit array. */
+	if (MIC_A0_STEP == mdev->stepping)
+		mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS +
+			MIC_X100_SBOX_MSIXPBACR);
+
+	if (mdev->irq_info.num_vectors <= 1) {
+		reg = mic_mmio_read(mw, sicr0);
+
+		if (unlikely(!reg))
+			goto done;
+
+		mic_mmio_write(mw, reg, sicr0);
+	}
+
+	if (mdev->stepping >= MIC_B0_STEP)
+		mdev->intr_ops->enable_interrupts(mdev);
+done:
+	return reg;
+}
+
+/**
+ * mic_x100_hw_intr_init - Initialize h/w specific interrupt
+ * information.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_hw_intr_init(struct mic_device *mdev)
+{
+	mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init;
+}
+
+/**
+ * mic_x100_read_msi_to_src_map - read from the MSI mapping registers
+ * @mdev: pointer to mic_device instance
+ * @idx: index to the mapping register, 0 based
+ *
+ * This function allows reading of the 32bit MSI mapping register.
+ *
+ * RETURNS: The value in the register.
+ */
+static u32
+mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx)
+{
+	return mic_mmio_read(&mdev->mmio,
+		MIC_X100_SBOX_BASE_ADDRESS +
+		MIC_X100_SBOX_MXAR0 + idx * 4);
+}
+
+/**
+ * mic_x100_program_msi_to_src_map - program the MSI mapping registers
+ * @mdev: pointer to mic_device instance
+ * @idx: index to the mapping register, 0 based
+ * @offset: The bit offset in the register that needs to be updated.
+ * @set: boolean specifying if the bit in the specified offset needs
+ * to be set or cleared.
+ *
+ * RETURNS: None.
+ */
+static void
+mic_x100_program_msi_to_src_map(struct mic_device *mdev,
+				int idx, int offset, bool set)
+{
+	unsigned long reg;
+	struct mic_mw *mw = &mdev->mmio;
+	u32 mxar = MIC_X100_SBOX_BASE_ADDRESS +
+		MIC_X100_SBOX_MXAR0 + idx * 4;
+
+	reg = mic_mmio_read(mw, mxar);
+	if (set)
+		__set_bit(offset, &reg);
+	else
+		__clear_bit(offset, &reg);
+	mic_mmio_write(mw, reg, mxar);
+}
+
+/*
+ * mic_x100_reset_fw_ready - Reset Firmware ready status field.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_reset_fw_ready(struct mic_device *mdev)
+{
+	mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0);
+}
+
+/*
+ * mic_x100_is_fw_ready - Check if firmware is ready.
+ * @mdev: pointer to mic_device instance
+ */
+static bool mic_x100_is_fw_ready(struct mic_device *mdev)
+{
+	u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
+	return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false;
+}
+
+/**
+ * mic_x100_get_apic_id - Get bootstrap APIC ID.
+ * @mdev: pointer to mic_device instance
+ */
+static u32 mic_x100_get_apic_id(struct mic_device *mdev)
+{
+	u32 scratch2 = 0;
+
+	scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
+	return MIC_X100_SPAD2_APIC_ID(scratch2);
+}
+
+/**
+ * mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_send_firmware_intr(struct mic_device *mdev)
+{
+	u32 apicicr_low;
+	u64 apic_icr_offset = MIC_X100_SBOX_APICICR7;
+	int vector = MIC_X100_BSP_INTERRUPT_VECTOR;
+	struct mic_mw *mw = &mdev->mmio;
+
+	/*
+	 * For MIC we need to make sure we "hit"
+	 * the send_icr bit (13).
+	 */
+	apicicr_low = (vector | (1 << 13));
+
+	mic_mmio_write(mw, mic_x100_get_apic_id(mdev),
+		       MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4);
+
+	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
+	wmb();
+	mic_mmio_write(mw, apicicr_low,
+		       MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
+}
+
+/**
+ * mic_x100_hw_reset - Reset the MIC device.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_hw_reset(struct mic_device *mdev)
+{
+	u32 reset_reg;
+	u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR;
+	struct mic_mw *mw = &mdev->mmio;
+
+	/* Ensure that the reset is ordered w.r.t. previous loads and stores */
+	mb();
+	/* Trigger reset */
+	reset_reg = mic_mmio_read(mw, rgcr);
+	reset_reg |= 0x1;
+	mic_mmio_write(mw, reset_reg, rgcr);
+	/*
+	 * It seems we really want to delay at least 1 second
+	 * after touching reset to prevent a lot of problems.
+	 */
+	msleep(1000);
+}
+
+/**
+ * mic_x100_load_command_line - Load command line to MIC.
+ * @mdev: pointer to mic_device instance
+ * @fw: the firmware image
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw)
+{
+	u32 len = 0;
+	u32 boot_mem;
+	char *buf;
+	void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size;
+#define CMDLINE_SIZE 2048
+
+	boot_mem = mdev->aper.len >> 20;
+	buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL);
+	if (!buf) {
+		dev_err(mdev->sdev->parent,
+			"%s %d allocation failed\n", __func__, __LINE__);
+		return -ENOMEM;
+	}
+	len += snprintf(buf, CMDLINE_SIZE - len,
+		" mem=%dM", boot_mem);
+	if (mdev->cmdline)
+		snprintf(buf + len, CMDLINE_SIZE - len, " %s", mdev->cmdline);
+	memcpy_toio(cmd_line_va, buf, strlen(buf) + 1);
+	kfree(buf);
+	return 0;
+}
+
+/**
+ * mic_x100_load_ramdisk - Load ramdisk to MIC.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_load_ramdisk(struct mic_device *mdev)
+{
+	const struct firmware *fw;
+	int rc;
+	struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr;
+
+	rc = request_firmware(&fw,
+			mdev->ramdisk, mdev->sdev->parent);
+	if (rc < 0) {
+		dev_err(mdev->sdev->parent,
+			"ramdisk request_firmware failed: %d %s\n",
+			rc, mdev->ramdisk);
+		goto error;
+	}
+	/*
+	 * Typically the bootaddr for card OS is 64M
+	 * so copy over the ramdisk @ 128M.
+	 */
+	memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size);
+	iowrite32(cpu_to_le32(mdev->bootaddr << 1), &bp->hdr.ramdisk_image);
+	iowrite32(cpu_to_le32(fw->size), &bp->hdr.ramdisk_size);
+	release_firmware(fw);
+error:
+	return rc;
+}
+
+/**
+ * mic_x100_get_boot_addr - Get MIC boot address.
+ * @mdev: pointer to mic_device instance
+ *
+ * This function is called during firmware load to determine
+ * the address at which the OS should be downloaded in card
+ * memory i.e. GDDR.
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_get_boot_addr(struct mic_device *mdev)
+{
+	u32 scratch2, boot_addr;
+	int rc = 0;
+
+	scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
+	boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2);
+	dev_dbg(mdev->sdev->parent, "%s %d boot_addr 0x%x\n",
+		__func__, __LINE__, boot_addr);
+	if (boot_addr > (1 << 31)) {
+		dev_err(mdev->sdev->parent,
+			"incorrect bootaddr 0x%x\n",
+			boot_addr);
+		rc = -EINVAL;
+		goto error;
+	}
+	mdev->bootaddr = boot_addr;
+error:
+	return rc;
+}
+
+/**
+ * mic_x100_load_firmware - Load firmware to MIC.
+ * @mdev: pointer to mic_device instance
+ * @buf: buffer containing boot string including firmware/ramdisk path.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_load_firmware(struct mic_device *mdev, const char *buf)
+{
+	int rc;
+	const struct firmware *fw;
+
+	rc = mic_x100_get_boot_addr(mdev);
+	if (rc)
+		goto error;
+	/* load OS */
+	rc = request_firmware(&fw, mdev->firmware, mdev->sdev->parent);
+	if (rc < 0) {
+		dev_err(mdev->sdev->parent,
+			"ramdisk request_firmware failed: %d %s\n",
+			rc, mdev->firmware);
+		goto error;
+	}
+	if (mdev->bootaddr > mdev->aper.len - fw->size) {
+		rc = -EINVAL;
+		dev_err(mdev->sdev->parent, "%s %d rc %d bootaddr 0x%x\n",
+			__func__, __LINE__, rc, mdev->bootaddr);
+		release_firmware(fw);
+		goto error;
+	}
+	memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size);
+	mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size);
+	if (!strcmp(mdev->bootmode, "elf"))
+		goto done;
+	/* load command line */
+	rc = mic_x100_load_command_line(mdev, fw);
+	if (rc) {
+		dev_err(mdev->sdev->parent, "%s %d rc %d\n",
+			__func__, __LINE__, rc);
+		goto error;
+	}
+	release_firmware(fw);
+	/* load ramdisk */
+	if (mdev->ramdisk)
+		rc = mic_x100_load_ramdisk(mdev);
+error:
+	dev_dbg(mdev->sdev->parent, "%s %d rc %d\n", __func__, __LINE__, rc);
+done:
+	return rc;
+}
+
+/**
+ * mic_x100_get_postcode - Get postcode status from firmware.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: postcode.
+ */
+static u32 mic_x100_get_postcode(struct mic_device *mdev)
+{
+	return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE);
+}
+
+/**
+ * mic_x100_smpt_set - Update an SMPT entry with a DMA address.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: none.
+ */
+static void
+mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index)
+{
+#define SNOOP_ON	(0 << 0)
+#define SNOOP_OFF	(1 << 0)
+/*
+ * Sbox Smpt Reg Bits:
+ * Bits	31:2	Host address
+ * Bits	1	RSVD
+ * Bits	0	No snoop
+ */
+#define BUILD_SMPT(NO_SNOOP, HOST_ADDR)  \
+	(u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01))
+
+	uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON,
+			dma_addr >> mdev->smpt->info.page_shift);
+	mic_mmio_write(&mdev->mmio, smpt_reg_val,
+		       MIC_X100_SBOX_BASE_ADDRESS +
+		       MIC_X100_SBOX_SMPT00 + (4 * index));
+}
+
+/**
+ * mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: none.
+ */
+static void mic_x100_smpt_hw_init(struct mic_device *mdev)
+{
+	struct mic_smpt_hw_info *info = &mdev->smpt->info;
+
+	info->num_reg = 32;
+	info->page_shift = 34;
+	info->page_size = (1ULL << info->page_shift);
+	info->base = 0x8000000000ULL;
+}
+
+struct mic_smpt_ops mic_x100_smpt_ops = {
+	.init = mic_x100_smpt_hw_init,
+	.set = mic_x100_smpt_set,
+};
+
+struct mic_hw_ops mic_x100_ops = {
+	.aper_bar = MIC_X100_APER_BAR,
+	.mmio_bar = MIC_X100_MMIO_BAR,
+	.read_spad = mic_x100_read_spad,
+	.write_spad = mic_x100_write_spad,
+	.send_intr = mic_x100_send_intr,
+	.ack_interrupt = mic_x100_ack_interrupt,
+	.reset = mic_x100_hw_reset,
+	.reset_fw_ready = mic_x100_reset_fw_ready,
+	.is_fw_ready = mic_x100_is_fw_ready,
+	.send_firmware_intr = mic_x100_send_firmware_intr,
+	.load_mic_fw = mic_x100_load_firmware,
+	.get_postcode = mic_x100_get_postcode,
+};
+
+struct mic_hw_intr_ops mic_x100_intr_ops = {
+	.intr_init = mic_x100_hw_intr_init,
+	.enable_interrupts = mic_x100_enable_interrupts,
+	.disable_interrupts = mic_x100_disable_interrupts,
+	.program_msi_to_src_map = mic_x100_program_msi_to_src_map,
+	.read_msi_to_src_map = mic_x100_read_msi_to_src_map,
+};
diff --git a/drivers/misc/mic/host/mic_x100.h b/drivers/misc/mic/host/mic_x100.h
new file mode 100644
index 0000000..8b7daa1
--- /dev/null
+++ b/drivers/misc/mic/host/mic_x100.h
@@ -0,0 +1,98 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#ifndef _MIC_X100_HW_H_
+#define _MIC_X100_HW_H_
+
+#define MIC_X100_PCI_DEVICE_2250 0x2250
+#define MIC_X100_PCI_DEVICE_2251 0x2251
+#define MIC_X100_PCI_DEVICE_2252 0x2252
+#define MIC_X100_PCI_DEVICE_2253 0x2253
+#define MIC_X100_PCI_DEVICE_2254 0x2254
+#define MIC_X100_PCI_DEVICE_2255 0x2255
+#define MIC_X100_PCI_DEVICE_2256 0x2256
+#define MIC_X100_PCI_DEVICE_2257 0x2257
+#define MIC_X100_PCI_DEVICE_2258 0x2258
+#define MIC_X100_PCI_DEVICE_2259 0x2259
+#define MIC_X100_PCI_DEVICE_225a 0x225a
+#define MIC_X100_PCI_DEVICE_225b 0x225b
+#define MIC_X100_PCI_DEVICE_225c 0x225c
+#define MIC_X100_PCI_DEVICE_225d 0x225d
+#define MIC_X100_PCI_DEVICE_225e 0x225e
+
+#define MIC_X100_APER_BAR 0
+#define MIC_X100_MMIO_BAR 4
+
+#define MIC_X100_SBOX_BASE_ADDRESS 0x00010000
+#define MIC_X100_SBOX_SPAD0 0x0000AB20
+#define MIC_X100_SBOX_SICR0_DBR(x) ((x) & 0xf)
+#define MIC_X100_SBOX_SICR0_DMA(x) (((x) >> 8) & 0xff)
+#define MIC_X100_SBOX_SICE0_DBR(x) ((x) & 0xf)
+#define MIC_X100_SBOX_DBR_BITS(x) ((x) & 0xf)
+#define MIC_X100_SBOX_SICE0_DMA(x) (((x) >> 8) & 0xff)
+#define MIC_X100_SBOX_DMA_BITS(x) (((x) & 0xff) << 8)
+
+#define MIC_X100_SBOX_APICICR0 0x0000A9D0
+#define MIC_X100_SBOX_SICR0 0x00009004
+#define MIC_X100_SBOX_SICE0 0x0000900C
+#define MIC_X100_SBOX_SICC0 0x00009010
+#define MIC_X100_SBOX_SIAC0 0x00009014
+#define MIC_X100_SBOX_MSIXPBACR 0x00009084
+#define MIC_X100_SBOX_MXAR0 0x00009044
+#define MIC_X100_SBOX_SMPT00 0x00003100
+#define MIC_X100_SBOX_RDMASR0 0x0000B180
+
+#define MIC_X100_DOORBELL_IDX_START 0
+#define MIC_X100_NUM_DOORBELL 4
+#define MIC_X100_DMA_IDX_START 8
+#define MIC_X100_NUM_DMA 8
+#define MIC_X100_ERR_IDX_START 30
+#define MIC_X100_NUM_ERR 1
+
+#define MIC_X100_NUM_SBOX_IRQ 8
+#define MIC_X100_NUM_RDMASR_IRQ 8
+#define MIC_X100_RDMASR_IRQ_BASE 17
+#define MIC_X100_SPAD2_DOWNLOAD_STATUS(x) ((x) & 0x1)
+#define MIC_X100_SPAD2_APIC_ID(x)	(((x) >> 1) & 0x1ff)
+#define MIC_X100_SPAD2_DOWNLOAD_ADDR(x) ((x) & 0xfffff000)
+#define MIC_X100_SBOX_APICICR7 0x0000AA08
+#define MIC_X100_SBOX_RGCR 0x00004010
+#define MIC_X100_SBOX_SDBIC0 0x0000CC90
+#define MIC_X100_DOWNLOAD_INFO 2
+#define MIC_X100_FW_SIZE 5
+#define MIC_X100_POSTCODE 0x242c
+
+static const u16 mic_x100_intr_init[] = {
+		MIC_X100_DOORBELL_IDX_START,
+		MIC_X100_DMA_IDX_START,
+		MIC_X100_ERR_IDX_START,
+		MIC_X100_NUM_DOORBELL,
+		MIC_X100_NUM_DMA,
+		MIC_X100_NUM_ERR,
+};
+
+/* Host->Card(bootstrap) Interrupt Vector */
+#define MIC_X100_BSP_INTERRUPT_VECTOR 229
+
+extern struct mic_hw_ops mic_x100_ops;
+extern struct mic_smpt_ops mic_x100_smpt_ops;
+extern struct mic_hw_intr_ops mic_x100_intr_ops;
+
+#endif
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 68b7c77..3075492 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -395,7 +395,7 @@
 	iowrite32(0, pht->caddr + PHN_IRQCTL);
 	ioread32(pht->caddr + PHN_IRQCTL); /* PCI posting */
 	retval = request_irq(pdev->irq, phantom_isr,
-			IRQF_SHARED | IRQF_DISABLED, "phantom", pht);
+			IRQF_SHARED, "phantom", pht);
 	if (retval) {
 		dev_err(&pdev->dev, "can't establish ISR\n");
 		goto err_unmo;
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index f84ff0c..eda38cb 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -892,7 +892,6 @@
 	}
 
 	iounmap(drv_data->pti_ioaddr);
-	pci_set_drvdata(pdev, NULL);
 	kfree(drv_data);
 	pci_release_region(pdev, 1);
 	pci_disable_device(pdev);
diff --git a/drivers/misc/ti_dac7512.c b/drivers/misc/ti_dac7512.c
index 9b23722..83da711 100644
--- a/drivers/misc/ti_dac7512.c
+++ b/drivers/misc/ti_dac7512.c
@@ -22,9 +22,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/spi/spi.h>
-
-#define DAC7512_DRV_NAME	"dac7512"
-#define DRIVER_VERSION		"1.0"
+#include <linux/of.h>
 
 static ssize_t dac7512_store_val(struct device *dev,
 				 struct device_attribute *attr,
@@ -75,13 +73,29 @@
 	return 0;
 }
 
+static const struct spi_device_id dac7512_id_table[] = {
+	{ "dac7512", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, dac7512_id_table);
+
+#ifdef CONFIG_OF
+static const struct of_device_id dac7512_of_match[] = {
+	{ .compatible = "ti,dac7512", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dac7512_of_match);
+#endif
+
 static struct spi_driver dac7512_driver = {
 	.driver = {
-		.name	= DAC7512_DRV_NAME,
+		.name	= "dac7512",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(dac7512_of_match),
 	},
 	.probe	= dac7512_probe,
 	.remove	= dac7512_remove,
+	.id_table = dac7512_id_table,
 };
 
 module_spi_driver(dac7512_driver);
@@ -89,4 +103,3 @@
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_DESCRIPTION("DAC7512 16-bit DAC");
 MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c
index f8d66543..a606c89 100644
--- a/drivers/misc/tifm_7xx1.c
+++ b/drivers/misc/tifm_7xx1.c
@@ -356,8 +356,10 @@
 	pci_set_drvdata(dev, fm);
 
 	fm->addr = pci_ioremap_bar(dev, 0);
-	if (!fm->addr)
+	if (!fm->addr) {
+		rc = -ENODEV;
 		goto err_out_free;
+	}
 
 	rc = request_irq(dev->irq, tifm_7xx1_isr, IRQF_SHARED, DRIVER_NAME, fm);
 	if (rc)
@@ -378,7 +380,6 @@
 err_out_unmap:
 	iounmap(fm->addr);
 err_out_free:
-	pci_set_drvdata(dev, NULL);
 	tifm_free_adapter(fm);
 err_out_int:
 	pci_intx(dev, 0);
@@ -405,8 +406,6 @@
 	for (cnt = 0; cnt < fm->num_sockets; cnt++)
 		tifm_7xx1_sock_power_off(tifm_7xx1_sock_addr(fm->addr, cnt));
 
-	pci_set_drvdata(dev, NULL);
-
 	iounmap(fm->addr);
 	pci_intx(dev, 0);
 	pci_release_regions(dev);
diff --git a/drivers/misc/tifm_core.c b/drivers/misc/tifm_core.c
index 0ab7c92..a511b2a 100644
--- a/drivers/misc/tifm_core.c
+++ b/drivers/misc/tifm_core.c
@@ -145,15 +145,17 @@
 	struct tifm_dev *sock = container_of(dev, struct tifm_dev, dev);
 	return sprintf(buf, "%x", sock->type);
 }
+static DEVICE_ATTR_RO(type);
 
-static struct device_attribute tifm_dev_attrs[] = {
-	__ATTR(type, S_IRUGO, type_show, NULL),
-	__ATTR_NULL
+static struct attribute *tifm_dev_attrs[] = {
+	&dev_attr_type.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(tifm_dev);
 
 static struct bus_type tifm_bus_type = {
 	.name      = "tifm",
-	.dev_attrs = tifm_dev_attrs,
+	.dev_groups = tifm_dev_groups,
 	.match     = tifm_bus_match,
 	.uevent    = tifm_uevent,
 	.probe     = tifm_device_probe,
diff --git a/drivers/misc/vmw_vmci/vmci_guest.c b/drivers/misc/vmw_vmci/vmci_guest.c
index b3a2b76..c98b03b 100644
--- a/drivers/misc/vmw_vmci/vmci_guest.c
+++ b/drivers/misc/vmw_vmci/vmci_guest.c
@@ -649,7 +649,7 @@
 	return 0;
 
 err_free_irq:
-	free_irq(vmci_dev->irq, &vmci_dev);
+	free_irq(vmci_dev->irq, vmci_dev);
 	tasklet_kill(&vmci_dev->datagram_tasklet);
 	tasklet_kill(&vmci_dev->bm_tasklet);
 
diff --git a/drivers/misc/vmw_vmci/vmci_host.c b/drivers/misc/vmw_vmci/vmci_host.c
index d4722b3..1723a6e 100644
--- a/drivers/misc/vmw_vmci/vmci_host.c
+++ b/drivers/misc/vmw_vmci/vmci_host.c
@@ -243,11 +243,7 @@
 	/*
 	 * Lock physical page backing a given user VA.
 	 */
-	down_read(&current->mm->mmap_sem);
-	retval = get_user_pages(current, current->mm,
-				PAGE_ALIGN(uva),
-				1, 1, 0, &page, NULL);
-	up_read(&current->mm->mmap_sem);
+	retval = get_user_pages_fast(PAGE_ALIGN(uva), 1, 1, &page);
 	if (retval != 1)
 		return VMCI_ERROR_GENERIC;
 
diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c
index a0515a6..1b7b303 100644
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -732,13 +732,9 @@
 	int retval;
 	int err = VMCI_SUCCESS;
 
-	down_write(&current->mm->mmap_sem);
-	retval = get_user_pages(current,
-				current->mm,
-				(uintptr_t) produce_uva,
-				produce_q->kernel_if->num_pages,
-				1, 0,
-				produce_q->kernel_if->u.h.header_page, NULL);
+	retval = get_user_pages_fast((uintptr_t) produce_uva,
+				     produce_q->kernel_if->num_pages, 1,
+				     produce_q->kernel_if->u.h.header_page);
 	if (retval < produce_q->kernel_if->num_pages) {
 		pr_warn("get_user_pages(produce) failed (retval=%d)", retval);
 		qp_release_pages(produce_q->kernel_if->u.h.header_page,
@@ -747,12 +743,9 @@
 		goto out;
 	}
 
-	retval = get_user_pages(current,
-				current->mm,
-				(uintptr_t) consume_uva,
-				consume_q->kernel_if->num_pages,
-				1, 0,
-				consume_q->kernel_if->u.h.header_page, NULL);
+	retval = get_user_pages_fast((uintptr_t) consume_uva,
+				     consume_q->kernel_if->num_pages, 1,
+				     consume_q->kernel_if->u.h.header_page);
 	if (retval < consume_q->kernel_if->num_pages) {
 		pr_warn("get_user_pages(consume) failed (retval=%d)", retval);
 		qp_release_pages(consume_q->kernel_if->u.h.header_page,
@@ -763,8 +756,6 @@
 	}
 
  out:
-	up_write(&current->mm->mmap_sem);
-
 	return err;
 }
 
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 704bf66..3e227bd 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -27,7 +27,7 @@
 
 #define to_mmc_driver(d)	container_of(d, struct mmc_driver, drv)
 
-static ssize_t mmc_type_show(struct device *dev,
+static ssize_t type_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	struct mmc_card *card = mmc_dev_to_card(dev);
@@ -45,11 +45,13 @@
 		return -EFAULT;
 	}
 }
+static DEVICE_ATTR_RO(type);
 
-static struct device_attribute mmc_dev_attrs[] = {
-	__ATTR(type, S_IRUGO, mmc_type_show, NULL),
-	__ATTR_NULL,
+static struct attribute *mmc_dev_attrs[] = {
+	&dev_attr_type.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(mmc_dev);
 
 /*
  * This currently matches any MMC driver to any MMC card - drivers
@@ -218,7 +220,7 @@
 
 static struct bus_type mmc_bus_type = {
 	.name		= "mmc",
-	.dev_attrs	= mmc_dev_attrs,
+	.dev_groups	= mmc_dev_groups,
 	.match		= mmc_bus_match,
 	.uevent		= mmc_bus_uevent,
 	.probe		= mmc_bus_probe,
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 6d67492a..ef89565 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -34,7 +34,8 @@
 									\
 	func = dev_to_sdio_func (dev);					\
 	return sprintf (buf, format_string, func->field);		\
-}
+}									\
+static DEVICE_ATTR_RO(field)
 
 sdio_config_attr(class, "0x%02x\n");
 sdio_config_attr(vendor, "0x%04x\n");
@@ -47,14 +48,16 @@
 	return sprintf(buf, "sdio:c%02Xv%04Xd%04X\n",
 			func->class, func->vendor, func->device);
 }
+static DEVICE_ATTR_RO(modalias);
 
-static struct device_attribute sdio_dev_attrs[] = {
-	__ATTR_RO(class),
-	__ATTR_RO(vendor),
-	__ATTR_RO(device),
-	__ATTR_RO(modalias),
-	__ATTR_NULL,
+static struct attribute *sdio_dev_attrs[] = {
+	&dev_attr_class.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_device.attr,
+	&dev_attr_modalias.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(sdio_dev);
 
 static const struct sdio_device_id *sdio_match_one(struct sdio_func *func,
 	const struct sdio_device_id *id)
@@ -225,7 +228,7 @@
 
 static struct bus_type sdio_bus_type = {
 	.name		= "sdio",
-	.dev_attrs	= sdio_dev_attrs,
+	.dev_groups	= sdio_dev_groups,
 	.match		= sdio_bus_match,
 	.uevent		= sdio_bus_uevent,
 	.probe		= sdio_bus_probe,
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 06c5b0b..deecee0 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -655,7 +655,7 @@
 	.enable_sdio_irq	= mvsd_enable_sdio_irq,
 };
 
-static void __init
+static void
 mv_conf_mbus_windows(struct mvsd_host *host,
 		     const struct mbus_dram_target_info *dram)
 {
@@ -677,7 +677,7 @@
 	}
 }
 
-static int __init mvsd_probe(struct platform_device *pdev)
+static int mvsd_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct mmc_host *mmc = NULL;
@@ -819,7 +819,7 @@
 	return ret;
 }
 
-static int __exit mvsd_remove(struct platform_device *pdev)
+static int mvsd_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 
@@ -872,7 +872,8 @@
 MODULE_DEVICE_TABLE(of, mvsdio_dt_ids);
 
 static struct platform_driver mvsd_driver = {
-	.remove		= __exit_p(mvsd_remove),
+	.probe		= mvsd_probe,
+	.remove		= mvsd_remove,
 	.suspend	= mvsd_suspend,
 	.resume		= mvsd_resume,
 	.driver		= {
@@ -881,7 +882,7 @@
 	},
 };
 
-module_platform_driver_probe(mvsd_driver, mvsd_probe);
+module_platform_driver(mvsd_driver);
 
 /* maximum card clock frequency (default 50MHz) */
 module_param(maxfreq, int, 0);
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 060feea..bd1ce7d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1139,7 +1139,7 @@
 	return 0;
 }
 
-static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev,
+static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
 					 struct atmel_nand_host *host)
 {
 	struct mtd_info *mtd = &host->mtd;
@@ -1548,7 +1548,7 @@
 }
 #endif
 
-static int __init atmel_hw_nand_init_params(struct platform_device *pdev,
+static int atmel_hw_nand_init_params(struct platform_device *pdev,
 					 struct atmel_nand_host *host)
 {
 	struct mtd_info *mtd = &host->mtd;
@@ -1987,7 +1987,7 @@
 /*
  * Probe for the NAND device.
  */
-static int __init atmel_nand_probe(struct platform_device *pdev)
+static int atmel_nand_probe(struct platform_device *pdev)
 {
 	struct atmel_nand_host *host;
 	struct mtd_info *mtd;
@@ -2184,7 +2184,7 @@
 /*
  * Remove a NAND device.
  */
-static int __exit atmel_nand_remove(struct platform_device *pdev)
+static int atmel_nand_remove(struct platform_device *pdev)
 {
 	struct atmel_nand_host *host = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = &host->mtd;
@@ -2270,7 +2270,8 @@
 };
 
 static struct platform_driver atmel_nand_driver = {
-	.remove		= __exit_p(atmel_nand_remove),
+	.probe		= atmel_nand_probe,
+	.remove		= atmel_nand_remove,
 	.driver		= {
 		.name	= "atmel_nand",
 		.owner	= THIS_MODULE,
@@ -2278,7 +2279,7 @@
 	},
 };
 
-module_platform_driver_probe(atmel_nand_driver, atmel_nand_probe);
+module_platform_driver(atmel_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Rick Bronson");
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index c29b836..ec9b646 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -149,14 +149,6 @@
 	return -EPERM;
 }
 
-static const void *bonding_namespace(struct class *cls,
-				     const struct class_attribute *attr)
-{
-	const struct bond_net *bn =
-		container_of(attr, struct bond_net, class_attr_bonding_masters);
-	return bn->net;
-}
-
 /* class attribute for bond_masters file.  This ends up in /sys/class/net */
 static const struct class_attribute class_attr_bonding_masters = {
 	.attr = {
@@ -165,7 +157,6 @@
 	},
 	.show = bonding_show_bonds,
 	.store = bonding_store_bonds,
-	.namespace = bonding_namespace,
 };
 
 int bond_create_slave_symlinks(struct net_device *master,
@@ -1787,7 +1778,8 @@
 	bn->class_attr_bonding_masters = class_attr_bonding_masters;
 	sysfs_attr_init(&bn->class_attr_bonding_masters.attr);
 
-	ret = netdev_class_create_file(&bn->class_attr_bonding_masters);
+	ret = netdev_class_create_file_ns(&bn->class_attr_bonding_masters,
+					  bn->net);
 	/*
 	 * Permit multiple loads of the module by ignoring failures to
 	 * create the bonding_masters sysfs file.  Bonding devices
@@ -1817,7 +1809,7 @@
  */
 void bond_destroy_sysfs(struct bond_net *bn)
 {
-	netdev_class_remove_file(&bn->class_attr_bonding_masters);
+	netdev_class_remove_file_ns(&bn->class_attr_bonding_masters, bn->net);
 }
 
 /*
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index a668cd4..e3fc07c 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -814,9 +814,6 @@
 			msg_ctrl_save = priv->read_reg(priv,
 					C_CAN_IFACE(MSGCTRL_REG, 0));
 
-			if (msg_ctrl_save & IF_MCONT_EOB)
-				return num_rx_pkts;
-
 			if (msg_ctrl_save & IF_MCONT_MSGLST) {
 				c_can_handle_lost_msg_obj(dev, 0, msg_obj);
 				num_rx_pkts++;
@@ -824,6 +821,9 @@
 				continue;
 			}
 
+			if (msg_ctrl_save & IF_MCONT_EOB)
+				return num_rx_pkts;
+
 			if (!(msg_ctrl_save & IF_MCONT_NEWDAT))
 				continue;
 
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 3b95465..4b2d5ed 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -1544,9 +1544,9 @@
 	return 0;
 }
 
-static void kvaser_usb_get_endpoints(const struct usb_interface *intf,
-				     struct usb_endpoint_descriptor **in,
-				     struct usb_endpoint_descriptor **out)
+static int kvaser_usb_get_endpoints(const struct usb_interface *intf,
+				    struct usb_endpoint_descriptor **in,
+				    struct usb_endpoint_descriptor **out)
 {
 	const struct usb_host_interface *iface_desc;
 	struct usb_endpoint_descriptor *endpoint;
@@ -1557,12 +1557,18 @@
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 		endpoint = &iface_desc->endpoint[i].desc;
 
-		if (usb_endpoint_is_bulk_in(endpoint))
+		if (!*in && usb_endpoint_is_bulk_in(endpoint))
 			*in = endpoint;
 
-		if (usb_endpoint_is_bulk_out(endpoint))
+		if (!*out && usb_endpoint_is_bulk_out(endpoint))
 			*out = endpoint;
+
+		/* use first bulk endpoint for in and out */
+		if (*in && *out)
+			return 0;
 	}
+
+	return -ENODEV;
 }
 
 static int kvaser_usb_probe(struct usb_interface *intf,
@@ -1576,8 +1582,8 @@
 	if (!dev)
 		return -ENOMEM;
 
-	kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out);
-	if (!dev->bulk_in || !dev->bulk_out) {
+	err = kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out);
+	if (err) {
 		dev_err(&intf->dev, "Cannot get usb endpoint(s)");
 		return err;
 	}
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 94edc9c..1b89f1a 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -725,7 +725,6 @@
 {
 	struct net_device *dev = dev_id;
 
-	clear_ioasic_dma_irq(irq);
 	printk(KERN_ERR "%s: DMA error\n", dev->name);
 	return IRQ_HANDLED;
 }
@@ -812,7 +811,7 @@
 	if (lp->dma_irq >= 0) {
 		unsigned long flags;
 
-		if (request_irq(lp->dma_irq, lance_dma_merr_int, 0,
+		if (request_irq(lp->dma_irq, lance_dma_merr_int, IRQF_ONESHOT,
 				"lance error", dev)) {
 			free_irq(dev->irq, dev);
 			printk("%s: Can't get DMA IRQ %d\n", dev->name,
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 249468f..9e8a3e0 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -244,25 +244,33 @@
 				     struct bgmac_slot_info *slot)
 {
 	struct device *dma_dev = bgmac->core->dma_dev;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
 	struct bgmac_rx_header *rx;
 
 	/* Alloc skb */
-	slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
-	if (!slot->skb)
+	skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
+	if (!skb)
 		return -ENOMEM;
 
 	/* Poison - if everything goes fine, hardware will overwrite it */
-	rx = (struct bgmac_rx_header *)slot->skb->data;
+	rx = (struct bgmac_rx_header *)skb->data;
 	rx->len = cpu_to_le16(0xdead);
 	rx->flags = cpu_to_le16(0xbeef);
 
 	/* Map skb for the DMA */
-	slot->dma_addr = dma_map_single(dma_dev, slot->skb->data,
-					BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dma_dev, slot->dma_addr)) {
+	dma_addr = dma_map_single(dma_dev, skb->data,
+				  BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dma_dev, dma_addr)) {
 		bgmac_err(bgmac, "DMA mapping error\n");
+		dev_kfree_skb(skb);
 		return -ENOMEM;
 	}
+
+	/* Update the slot */
+	slot->skb = skb;
+	slot->dma_addr = dma_addr;
+
 	if (slot->dma_addr & 0xC0000000)
 		bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 4ab4c89..74d6486 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2545,10 +2545,6 @@
 		}
 	}
 
-	/* Allocated memory for FW statistics  */
-	if (bnx2x_alloc_fw_stats_mem(bp))
-		LOAD_ERROR_EXIT(bp, load_error0);
-
 	/* need to be done after alloc mem, since it's self adjusting to amount
 	 * of memory available for RSS queues
 	 */
@@ -2558,6 +2554,10 @@
 		LOAD_ERROR_EXIT(bp, load_error0);
 	}
 
+	/* Allocated memory for FW statistics  */
+	if (bnx2x_alloc_fw_stats_mem(bp))
+		LOAD_ERROR_EXIT(bp, load_error0);
+
 	/* request pf to initialize status blocks */
 	if (IS_VF(bp)) {
 		rc = bnx2x_vfpf_init(bp);
@@ -2812,8 +2812,8 @@
 	if (IS_PF(bp))
 		bnx2x_clear_pf_load(bp);
 load_error0:
-	bnx2x_free_fp_mem(bp);
 	bnx2x_free_fw_stats_mem(bp);
+	bnx2x_free_fp_mem(bp);
 	bnx2x_free_mem(bp);
 
 	return rc;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index bf08ad6..5e07efb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2018,6 +2018,8 @@
 
 void bnx2x_iov_remove_one(struct bnx2x *bp)
 {
+	int vf_idx;
+
 	/* if SRIOV is not enabled there's nothing to do */
 	if (!IS_SRIOV(bp))
 		return;
@@ -2026,6 +2028,18 @@
 	pci_disable_sriov(bp->pdev);
 	DP(BNX2X_MSG_IOV, "sriov disabled\n");
 
+	/* disable access to all VFs */
+	for (vf_idx = 0; vf_idx < bp->vfdb->sriov.total; vf_idx++) {
+		bnx2x_pretend_func(bp,
+				   HW_VF_HANDLE(bp,
+						bp->vfdb->sriov.first_vf_in_pf +
+						vf_idx));
+		DP(BNX2X_MSG_IOV, "disabling internal access for vf %d\n",
+		   bp->vfdb->sriov.first_vf_in_pf + vf_idx);
+		bnx2x_vf_enable_internal(bp, 0);
+		bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
+	}
+
 	/* free vf database */
 	__bnx2x_iov_free_vfdb(bp);
 }
@@ -3197,7 +3211,7 @@
 	 * the "acquire" messages to appear on the VF PF channel.
 	 */
 	DP(BNX2X_MSG_IOV, "about to call enable sriov\n");
-	pci_disable_sriov(bp->pdev);
+	bnx2x_disable_sriov(bp);
 	rc = pci_enable_sriov(bp->pdev, req_vfs);
 	if (rc) {
 		BNX2X_ERR("pci_enable_sriov failed with %d\n", rc);
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index 9c89dc8..632b318 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -1599,7 +1599,8 @@
 	flits = skb_transport_offset(skb) / 8;
 	sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
 	sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
-			     skb->tail - skb->transport_header,
+			     skb_tail_pointer(skb) -
+			     skb_transport_header(skb),
 			     adap->pdev);
 	if (need_skb_unmap()) {
 		setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index db02023..c99dac6 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -696,6 +696,15 @@
 	return adapter->flags & BE_FLAGS_QNQ_ASYNC_EVT_RCVD;
 }
 
+static inline int fw_major_num(const char *fw_ver)
+{
+	int fw_major = 0;
+
+	sscanf(fw_ver, "%d.", &fw_major);
+
+	return fw_major;
+}
+
 extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
 		u16 num_popped);
 extern void be_link_status_update(struct be_adapter *adapter, u8 link_status);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 2c38cc4..53ed58b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3247,6 +3247,12 @@
 
 	be_cmd_get_fw_ver(adapter, adapter->fw_ver, adapter->fw_on_flash);
 
+	if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) {
+		dev_err(dev, "Firmware on card is old(%s), IRQs may not work.",
+			adapter->fw_ver);
+		dev_err(dev, "Please upgrade firmware to version >= 4.0\n");
+	}
+
 	if (adapter->vlans_added)
 		be_vid_config(adapter);
 
diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index dac564c..e784751 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -263,7 +263,9 @@
 {
 	if (likely(napi_schedule_prep(&mal->napi))) {
 		MAL_DBG2(mal, "schedule_poll" NL);
+		spin_lock(&mal->lock);
 		mal_disable_eob_irq(mal);
+		spin_unlock(&mal->lock);
 		__napi_schedule(&mal->napi);
 	} else
 		MAL_DBG2(mal, "already in poll" NL);
@@ -442,15 +444,13 @@
 		if (unlikely(mc->ops->peek_rx(mc->dev) ||
 			     test_bit(MAL_COMMAC_RX_STOPPED, &mc->flags))) {
 			MAL_DBG2(mal, "rotting packet" NL);
-			if (napi_reschedule(napi))
-				mal_disable_eob_irq(mal);
-			else
-				MAL_DBG2(mal, "already in poll list" NL);
-
-			if (budget > 0)
-				goto again;
-			else
+			if (!napi_reschedule(napi))
 				goto more_work;
+
+			spin_lock_irqsave(&mal->lock, flags);
+			mal_disable_eob_irq(mal);
+			spin_unlock_irqrestore(&mal->lock, flags);
+			goto again;
 		}
 		mc->ops->poll_tx(mc->dev);
 	}
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index ea20182..bb11624 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1691,7 +1691,7 @@
 			vp_oper->vlan_idx = NO_INDX;
 		}
 		if (NO_INDX != vp_oper->mac_idx) {
-			__mlx4_unregister_mac(&priv->dev, port, vp_oper->mac_idx);
+			__mlx4_unregister_mac(&priv->dev, port, vp_oper->state.mac);
 			vp_oper->mac_idx = NO_INDX;
 		}
 	}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 3ca00e0..ace217c 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -2276,9 +2276,9 @@
 		temp = (cmd.rsp.arg[8] & 0x7FFE0000) >> 17;
 		npar_info->max_linkspeed_reg_offset = temp;
 	}
-	if (npar_info->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS)
-		memcpy(ahw->extra_capability, &cmd.rsp.arg[16],
-		       sizeof(ahw->extra_capability));
+
+	memcpy(ahw->extra_capability, &cmd.rsp.arg[16],
+	       sizeof(ahw->extra_capability));
 
 out:
 	qlcnic_free_mbx_args(&cmd);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index f8adc7b..b64e2be 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -785,8 +785,6 @@
 
 #define QLCNIC_ENABLE_IPV4_LRO		1
 #define QLCNIC_ENABLE_IPV6_LRO		2
-#define QLCNIC_NO_DEST_IPV4_CHECK	(1 << 8)
-#define QLCNIC_NO_DEST_IPV6_CHECK	(2 << 8)
 
 int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 {
@@ -806,11 +804,10 @@
 
 	word = 0;
 	if (enable) {
-		word = QLCNIC_ENABLE_IPV4_LRO | QLCNIC_NO_DEST_IPV4_CHECK;
+		word = QLCNIC_ENABLE_IPV4_LRO;
 		if (adapter->ahw->extra_capability[0] &
 		    QLCNIC_FW_CAP2_HW_LRO_IPV6)
-			word |= QLCNIC_ENABLE_IPV6_LRO |
-				QLCNIC_NO_DEST_IPV6_CHECK;
+			word |= QLCNIC_ENABLE_IPV6_LRO;
 	}
 
 	req.words[0] = cpu_to_le64(word);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 9e61eb8..d8f4897e 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1131,7 +1131,10 @@
 		if (err == -EIO)
 			return err;
 		adapter->ahw->extra_capability[0] = temp;
+	} else {
+		adapter->ahw->extra_capability[0] = 0;
 	}
+
 	adapter->ahw->max_mac_filters = nic_info.max_mac_filters;
 	adapter->ahw->max_mtu = nic_info.max_mtu;
 
@@ -2159,8 +2162,7 @@
 	else if (qlcnic_83xx_check(adapter))
 		fw_cmd = QLCNIC_CMD_83XX_SET_DRV_VER;
 
-	if ((ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) &&
-	    (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_SET_DRV_VER))
+	if (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_SET_DRV_VER)
 		qlcnic_fw_cmd_set_drv_version(adapter, fw_cmd);
 }
 
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index adeee61..c9a1592 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -310,6 +310,7 @@
 			     const char *buf,
 			     size_t count)
 {
+	unsigned long flags;
 	int enabled;
 	int err;
 
@@ -324,9 +325,7 @@
 		return -EINVAL;
 	}
 
-	mutex_lock(&nt->mutex);
 	if (enabled) {	/* 1 */
-
 		/*
 		 * Skip netpoll_parse_options() -- all the attributes are
 		 * already configured via configfs. Just print them out.
@@ -334,19 +333,22 @@
 		netpoll_print_options(&nt->np);
 
 		err = netpoll_setup(&nt->np);
-		if (err) {
-			mutex_unlock(&nt->mutex);
+		if (err)
 			return err;
-		}
 
 		printk(KERN_INFO "netconsole: network logging started\n");
-
 	} else {	/* 0 */
+		/* We need to disable the netconsole before cleaning it up
+		 * otherwise we might end up in write_msg() with
+		 * nt->np.dev == NULL and nt->enabled == 1
+		 */
+		spin_lock_irqsave(&target_list_lock, flags);
+		nt->enabled = 0;
+		spin_unlock_irqrestore(&target_list_lock, flags);
 		netpoll_cleanup(&nt->np);
 	}
 
 	nt->enabled = enabled;
-	mutex_unlock(&nt->mutex);
 
 	return strnlen(buf, count);
 }
@@ -563,8 +565,10 @@
 	struct netconsole_target_attr *na =
 		container_of(attr, struct netconsole_target_attr, attr);
 
+	mutex_lock(&nt->mutex);
 	if (na->store)
 		ret = na->store(nt, buf, count);
+	mutex_unlock(&nt->mutex);
 
 	return ret;
 }
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index dc92097..56178761 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -438,17 +438,19 @@
 
 	return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
 }
+static DEVICE_ATTR_RO(phy_id);
 
-static struct device_attribute mdio_dev_attrs[] = {
-	__ATTR_RO(phy_id),
-	__ATTR_NULL
+static struct attribute *mdio_dev_attrs[] = {
+	&dev_attr_phy_id.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(mdio_dev);
 
 struct bus_type mdio_bus_type = {
 	.name		= "mdio_bus",
 	.match		= mdio_bus_match,
 	.pm		= MDIO_BUS_PM_OPS,
-	.dev_attrs	= mdio_dev_attrs,
+	.dev_groups	= mdio_dev_groups,
 };
 EXPORT_SYMBOL(mdio_bus_type);
 
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 846cc19..8e8d0fc 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -78,7 +78,6 @@
 #define AX_MEDIUM_STATUS_MODE			0x22
 	#define AX_MEDIUM_GIGAMODE	0x01
 	#define AX_MEDIUM_FULL_DUPLEX	0x02
-	#define AX_MEDIUM_ALWAYS_ONE	0x04
 	#define AX_MEDIUM_EN_125MHZ	0x08
 	#define AX_MEDIUM_RXFLOW_CTRLEN	0x10
 	#define AX_MEDIUM_TXFLOW_CTRLEN	0x20
@@ -1065,8 +1064,8 @@
 
 	/* Configure default medium type => giga */
 	*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
-		 AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
-		 AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+		 AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+		 AX_MEDIUM_GIGAMODE;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			  2, 2, tmp16);
 
@@ -1225,7 +1224,7 @@
 	}
 
 	mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
-	       AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE;
+	       AX_MEDIUM_RXFLOW_CTRLEN;
 
 	ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
 			 1, 1, &link_sts);
@@ -1339,8 +1338,8 @@
 
 	/* Configure default medium type => giga */
 	*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
-		 AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
-		 AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+		 AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+		 AX_MEDIUM_GIGAMODE;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			  2, 2, tmp16);
 
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 9fbdfcd..bbc9cb8 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1118,11 +1118,6 @@
 {
 	struct virtnet_info *vi = container_of(nfb, struct virtnet_info, nb);
 
-	mutex_lock(&vi->config_lock);
-
-	if (!vi->config_enable)
-		goto done;
-
 	switch(action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
 	case CPU_DOWN_FAILED:
@@ -1136,8 +1131,6 @@
 		break;
 	}
 
-done:
-	mutex_unlock(&vi->config_lock);
 	return NOTIFY_OK;
 }
 
@@ -1699,6 +1692,8 @@
 	struct virtnet_info *vi = vdev->priv;
 	int i;
 
+	unregister_hotcpu_notifier(&vi->nb);
+
 	/* Prevent config work handler from accessing the device */
 	mutex_lock(&vi->config_lock);
 	vi->config_enable = false;
@@ -1747,6 +1742,10 @@
 	virtnet_set_queues(vi, vi->curr_queue_pairs);
 	rtnl_unlock();
 
+	err = register_hotcpu_notifier(&vi->nb);
+	if (err)
+		return err;
+
 	return 0;
 }
 #endif
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 5bbcb5e..388ddf6 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -148,10 +148,6 @@
 static int  emancipate( struct net_device * );
 #endif
 
-#ifdef __i386__
-#define ASM_CRC 1
-#endif
-
 static const char  version[] =
 	"Granch SBNI12 driver ver 5.0.1  Jun 22 2001  Denis I.Timofeev.\n";
 
@@ -1551,88 +1547,6 @@
 
 /* -------------------------------------------------------------------------- */
 
-#ifdef ASM_CRC
-
-static u32
-calc_crc32( u32  crc,  u8  *p,  u32  len )
-{
-	register u32  _crc;
-	_crc = crc;
-	
-	__asm__ __volatile__ (
-		"xorl	%%ebx, %%ebx\n"
-		"movl	%2, %%esi\n" 
-		"movl	%3, %%ecx\n" 
-		"movl	$crc32tab, %%edi\n"
-		"shrl	$2, %%ecx\n"
-		"jz	1f\n"
-
-		".align 4\n"
-	"0:\n"
-		"movb	%%al, %%bl\n"
-		"movl	(%%esi), %%edx\n"
-		"shrl	$8, %%eax\n"
-		"xorb	%%dl, %%bl\n"
-		"shrl	$8, %%edx\n"
-		"xorl	(%%edi,%%ebx,4), %%eax\n"
-
-		"movb	%%al, %%bl\n"
-		"shrl	$8, %%eax\n"
-		"xorb	%%dl, %%bl\n"
-		"shrl	$8, %%edx\n"
-		"xorl	(%%edi,%%ebx,4), %%eax\n"
-
-		"movb	%%al, %%bl\n"
-		"shrl	$8, %%eax\n"
-		"xorb	%%dl, %%bl\n"
-		"movb	%%dh, %%dl\n" 
-		"xorl	(%%edi,%%ebx,4), %%eax\n"
-
-		"movb	%%al, %%bl\n"
-		"shrl	$8, %%eax\n"
-		"xorb	%%dl, %%bl\n"
-		"addl	$4, %%esi\n"
-		"xorl	(%%edi,%%ebx,4), %%eax\n"
-
-		"decl	%%ecx\n"
-		"jnz	0b\n"
-
-	"1:\n"
-		"movl	%3, %%ecx\n"
-		"andl	$3, %%ecx\n"
-		"jz	2f\n"
-
-		"movb	%%al, %%bl\n"
-		"shrl	$8, %%eax\n"
-		"xorb	(%%esi), %%bl\n"
-		"xorl	(%%edi,%%ebx,4), %%eax\n"
-
-		"decl	%%ecx\n"
-		"jz	2f\n"
-
-		"movb	%%al, %%bl\n"
-		"shrl	$8, %%eax\n"
-		"xorb	1(%%esi), %%bl\n"
-		"xorl	(%%edi,%%ebx,4), %%eax\n"
-
-		"decl	%%ecx\n"
-		"jz	2f\n"
-
-		"movb	%%al, %%bl\n"
-		"shrl	$8, %%eax\n"
-		"xorb	2(%%esi), %%bl\n"
-		"xorl	(%%edi,%%ebx,4), %%eax\n"
-	"2:\n"
-		: "=a" (_crc)
-		: "0" (_crc), "g" (p), "g" (len)
-		: "bx", "cx", "dx", "si", "di"
-	);
-
-	return  _crc;
-}
-
-#else	/* ASM_CRC */
-
 static u32
 calc_crc32( u32  crc,  u8  *p,  u32  len )
 {
@@ -1642,9 +1556,6 @@
 	return  crc;
 }
 
-#endif	/* ASM_CRC */
-
-
 static u32  crc32tab[] __attribute__ ((aligned(8))) = {
 	0xD202EF8D,  0xA505DF1B,  0x3C0C8EA1,  0x4B0BBE37,
 	0xD56F2B94,  0xA2681B02,  0x3B614AB8,  0x4C667A2E,
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 5715318..400fea1 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -163,6 +163,7 @@
 	unsigned long   credit_usec;
 	unsigned long   remaining_credit;
 	struct timer_list credit_timeout;
+	u64 credit_window_start;
 
 	/* Statistics */
 	unsigned long rx_gso_checksum_fixup;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 01bb854..459935a 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -312,8 +312,7 @@
 	vif->credit_bytes = vif->remaining_credit = ~0UL;
 	vif->credit_usec  = 0UL;
 	init_timer(&vif->credit_timeout);
-	/* Initialize 'expires' now: it's used to track the credit window. */
-	vif->credit_timeout.expires = jiffies;
+	vif->credit_window_start = get_jiffies_64();
 
 	dev->netdev_ops	= &xenvif_netdev_ops;
 	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index f3e591c..900da4b 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1185,9 +1185,8 @@
 
 static bool tx_credit_exceeded(struct xenvif *vif, unsigned size)
 {
-	unsigned long now = jiffies;
-	unsigned long next_credit =
-		vif->credit_timeout.expires +
+	u64 now = get_jiffies_64();
+	u64 next_credit = vif->credit_window_start +
 		msecs_to_jiffies(vif->credit_usec / 1000);
 
 	/* Timer could already be pending in rare cases. */
@@ -1195,8 +1194,8 @@
 		return true;
 
 	/* Passed the point where we can replenish credit? */
-	if (time_after_eq(now, next_credit)) {
-		vif->credit_timeout.expires = now;
+	if (time_after_eq64(now, next_credit)) {
+		vif->credit_window_start = now;
 		tx_add_credit(vif);
 	}
 
@@ -1208,6 +1207,7 @@
 			tx_credit_callback;
 		mod_timer(&vif->credit_timeout,
 			  next_credit);
+		vif->credit_window_start = next_credit;
 
 		return true;
 	}
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 3d95048..43186fe 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -3,7 +3,7 @@
 
 config PCI_MVEBU
 	bool "Marvell EBU PCIe controller"
-	depends on ARCH_MVEBU || ARCH_KIRKWOOD
+	depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
 	depends on OF
 
 config PCIE_DW
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 729d5a1..80b2250 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -9,13 +9,17 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/mbus.h>
+#include <linux/msi.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
-#include <linux/of_pci.h>
 #include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_pci.h>
 #include <linux/of_platform.h>
 
 /*
@@ -103,6 +107,7 @@
 struct mvebu_pcie {
 	struct platform_device *pdev;
 	struct mvebu_pcie_port *ports;
+	struct msi_chip *msi;
 	struct resource io;
 	struct resource realio;
 	struct resource mem;
@@ -115,7 +120,6 @@
 	char *name;
 	void __iomem *base;
 	spinlock_t conf_lock;
-	int haslink;
 	u32 port;
 	u32 lane;
 	int devfn;
@@ -124,6 +128,9 @@
 	unsigned int io_target;
 	unsigned int io_attr;
 	struct clk *clk;
+	int reset_gpio;
+	int reset_active_low;
+	char *reset_name;
 	struct mvebu_sw_pci_bridge bridge;
 	struct device_node *dn;
 	struct mvebu_pcie *pcie;
@@ -133,29 +140,39 @@
 	size_t iowin_size;
 };
 
+static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
+{
+	writel(val, port->base + reg);
+}
+
+static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
+{
+	return readl(port->base + reg);
+}
+
 static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
 {
-	return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
+	return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
 }
 
 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
 {
 	u32 stat;
 
-	stat = readl(port->base + PCIE_STAT_OFF);
+	stat = mvebu_readl(port, PCIE_STAT_OFF);
 	stat &= ~PCIE_STAT_BUS;
 	stat |= nr << 8;
-	writel(stat, port->base + PCIE_STAT_OFF);
+	mvebu_writel(port, stat, PCIE_STAT_OFF);
 }
 
 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
 {
 	u32 stat;
 
-	stat = readl(port->base + PCIE_STAT_OFF);
+	stat = mvebu_readl(port, PCIE_STAT_OFF);
 	stat &= ~PCIE_STAT_DEV;
 	stat |= nr << 16;
-	writel(stat, port->base + PCIE_STAT_OFF);
+	mvebu_writel(port, stat, PCIE_STAT_OFF);
 }
 
 /*
@@ -163,7 +180,7 @@
  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
  * WIN[0-3] -> DRAM bank[0-3]
  */
-static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
+static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 {
 	const struct mbus_dram_target_info *dram;
 	u32 size;
@@ -173,33 +190,34 @@
 
 	/* First, disable and clear BARs and windows. */
 	for (i = 1; i < 3; i++) {
-		writel(0, port->base + PCIE_BAR_CTRL_OFF(i));
-		writel(0, port->base + PCIE_BAR_LO_OFF(i));
-		writel(0, port->base + PCIE_BAR_HI_OFF(i));
+		mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
+		mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
+		mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
 	}
 
 	for (i = 0; i < 5; i++) {
-		writel(0, port->base + PCIE_WIN04_CTRL_OFF(i));
-		writel(0, port->base + PCIE_WIN04_BASE_OFF(i));
-		writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
 	}
 
-	writel(0, port->base + PCIE_WIN5_CTRL_OFF);
-	writel(0, port->base + PCIE_WIN5_BASE_OFF);
-	writel(0, port->base + PCIE_WIN5_REMAP_OFF);
+	mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
+	mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
+	mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
 
 	/* Setup windows for DDR banks.  Count total DDR size on the fly. */
 	size = 0;
 	for (i = 0; i < dram->num_cs; i++) {
 		const struct mbus_dram_window *cs = dram->cs + i;
 
-		writel(cs->base & 0xffff0000,
-		       port->base + PCIE_WIN04_BASE_OFF(i));
-		writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
-		writel(((cs->size - 1) & 0xffff0000) |
-			(cs->mbus_attr << 8) |
-			(dram->mbus_dram_target_id << 4) | 1,
-		       port->base + PCIE_WIN04_CTRL_OFF(i));
+		mvebu_writel(port, cs->base & 0xffff0000,
+			     PCIE_WIN04_BASE_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
+		mvebu_writel(port,
+			     ((cs->size - 1) & 0xffff0000) |
+			     (cs->mbus_attr << 8) |
+			     (dram->mbus_dram_target_id << 4) | 1,
+			     PCIE_WIN04_CTRL_OFF(i));
 
 		size += cs->size;
 	}
@@ -209,41 +227,40 @@
 		size = 1 << fls(size);
 
 	/* Setup BAR[1] to all DRAM banks. */
-	writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1));
-	writel(0, port->base + PCIE_BAR_HI_OFF(1));
-	writel(((size - 1) & 0xffff0000) | 1,
-	       port->base + PCIE_BAR_CTRL_OFF(1));
+	mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
+	mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
+	mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
+		     PCIE_BAR_CTRL_OFF(1));
 }
 
-static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
+static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
-	u16 cmd;
-	u32 mask;
+	u32 cmd, mask;
 
 	/* Point PCIe unit MBUS decode windows to DRAM space. */
 	mvebu_pcie_setup_wins(port);
 
 	/* Master + slave enable. */
-	cmd = readw(port->base + PCIE_CMD_OFF);
+	cmd = mvebu_readl(port, PCIE_CMD_OFF);
 	cmd |= PCI_COMMAND_IO;
 	cmd |= PCI_COMMAND_MEMORY;
 	cmd |= PCI_COMMAND_MASTER;
-	writew(cmd, port->base + PCIE_CMD_OFF);
+	mvebu_writel(port, cmd, PCIE_CMD_OFF);
 
 	/* Enable interrupt lines A-D. */
-	mask = readl(port->base + PCIE_MASK_OFF);
+	mask = mvebu_readl(port, PCIE_MASK_OFF);
 	mask |= PCIE_MASK_ENABLE_INTS;
-	writel(mask, port->base + PCIE_MASK_OFF);
+	mvebu_writel(port, mask, PCIE_MASK_OFF);
 }
 
 static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
 				 struct pci_bus *bus,
 				 u32 devfn, int where, int size, u32 *val)
 {
-	writel(PCIE_CONF_ADDR(bus->number, devfn, where),
-	       port->base + PCIE_CONF_ADDR_OFF);
+	mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
+		     PCIE_CONF_ADDR_OFF);
 
-	*val = readl(port->base + PCIE_CONF_DATA_OFF);
+	*val = mvebu_readl(port, PCIE_CONF_DATA_OFF);
 
 	if (size == 1)
 		*val = (*val >> (8 * (where & 3))) & 0xff;
@@ -257,21 +274,24 @@
 				 struct pci_bus *bus,
 				 u32 devfn, int where, int size, u32 val)
 {
-	int ret = PCIBIOS_SUCCESSFUL;
+	u32 _val, shift = 8 * (where & 3);
 
-	writel(PCIE_CONF_ADDR(bus->number, devfn, where),
-	       port->base + PCIE_CONF_ADDR_OFF);
+	mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
+		     PCIE_CONF_ADDR_OFF);
+	_val = mvebu_readl(port, PCIE_CONF_DATA_OFF);
 
 	if (size == 4)
-		writel(val, port->base + PCIE_CONF_DATA_OFF);
+		_val = val;
 	else if (size == 2)
-		writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
+		_val = (_val & ~(0xffff << shift)) | ((val & 0xffff) << shift);
 	else if (size == 1)
-		writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
+		_val = (_val & ~(0xff << shift)) | ((val & 0xff) << shift);
 	else
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	return ret;
+	mvebu_writel(port, _val, PCIE_CONF_DATA_OFF);
+
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
@@ -552,7 +572,7 @@
 	if (bus->number == 0)
 		return mvebu_sw_pci_bridge_write(port, where, size, val);
 
-	if (!port->haslink)
+	if (!mvebu_pcie_link_up(port))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	/*
@@ -594,7 +614,7 @@
 	if (bus->number == 0)
 		return mvebu_sw_pci_bridge_read(port, where, size, val);
 
-	if (!port->haslink) {
+	if (!mvebu_pcie_link_up(port)) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
@@ -626,7 +646,7 @@
 	.write = mvebu_pcie_wr_conf,
 };
 
-static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
+static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct mvebu_pcie *pcie = sys_to_pcie(sys);
 	int i;
@@ -645,7 +665,7 @@
 	return 1;
 }
 
-static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct of_irq oirq;
 	int ret;
@@ -673,11 +693,17 @@
 	return bus;
 }
 
-resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
-					  const struct resource *res,
-					  resource_size_t start,
-					  resource_size_t size,
-					  resource_size_t align)
+static void mvebu_pcie_add_bus(struct pci_bus *bus)
+{
+	struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
+	bus->msi = pcie->msi;
+}
+
+static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
+						const struct resource *res,
+						resource_size_t start,
+						resource_size_t size,
+						resource_size_t align)
 {
 	if (dev->bus->number != 0)
 		return start;
@@ -696,7 +722,7 @@
 		return start;
 }
 
-static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
+static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
 {
 	struct hw_pci hw;
 
@@ -709,6 +735,7 @@
 	hw.map_irq        = mvebu_pcie_map_irq;
 	hw.ops            = &mvebu_pcie_ops;
 	hw.align_resource = mvebu_pcie_align_resource;
+	hw.add_bus        = mvebu_pcie_add_bus;
 
 	pci_common_init(&hw);
 }
@@ -718,10 +745,8 @@
  * <...> property for one that matches the given port/lane. Once
  * found, maps it.
  */
-static void __iomem * __init
-mvebu_pcie_map_registers(struct platform_device *pdev,
-			 struct device_node *np,
-			 struct mvebu_pcie_port *port)
+static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
+		      struct device_node *np, struct mvebu_pcie_port *port)
 {
 	struct resource regs;
 	int ret = 0;
@@ -777,7 +802,22 @@
 	return -ENOENT;
 }
 
-static int __init mvebu_pcie_probe(struct platform_device *pdev)
+static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
+{
+	struct device_node *msi_node;
+
+	msi_node = of_parse_phandle(pcie->pdev->dev.of_node,
+				    "msi-parent", 0);
+	if (!msi_node)
+		return;
+
+	pcie->msi = of_pci_find_msi_chip_by_node(msi_node);
+
+	if (pcie->msi)
+		pcie->msi->dev = &pcie->pdev->dev;
+}
+
+static int mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie;
 	struct device_node *np = pdev->dev.of_node;
@@ -790,6 +830,7 @@
 		return -ENOMEM;
 
 	pcie->pdev = pdev;
+	platform_set_drvdata(pdev, pcie);
 
 	/* Get the PCIe memory and I/O aperture */
 	mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
@@ -818,13 +859,14 @@
 		return ret;
 	}
 
+	i = 0;
 	for_each_child_of_node(pdev->dev.of_node, child) {
 		if (!of_device_is_available(child))
 			continue;
-		pcie->nports++;
+		i++;
 	}
 
-	pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports *
+	pcie->ports = devm_kzalloc(&pdev->dev, i *
 				   sizeof(struct mvebu_pcie_port),
 				   GFP_KERNEL);
 	if (!pcie->ports)
@@ -833,6 +875,7 @@
 	i = 0;
 	for_each_child_of_node(pdev->dev.of_node, child) {
 		struct mvebu_pcie_port *port = &pcie->ports[i];
+		enum of_gpio_flags flags;
 
 		if (!of_device_is_available(child))
 			continue;
@@ -873,45 +916,68 @@
 			continue;
 		}
 
-		port->base = mvebu_pcie_map_registers(pdev, child, port);
-		if (IS_ERR(port->base)) {
-			dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
-				port->port, port->lane);
-			port->base = NULL;
-			continue;
-		}
+		port->reset_gpio = of_get_named_gpio_flags(child,
+						   "reset-gpios", 0, &flags);
+		if (gpio_is_valid(port->reset_gpio)) {
+			u32 reset_udelay = 20000;
 
-		mvebu_pcie_set_local_dev_nr(port, 1);
+			port->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
+			port->reset_name = kasprintf(GFP_KERNEL,
+				     "pcie%d.%d-reset", port->port, port->lane);
+			of_property_read_u32(child, "reset-delay-us",
+					     &reset_udelay);
 
-		if (mvebu_pcie_link_up(port)) {
-			port->haslink = 1;
-			dev_info(&pdev->dev, "PCIe%d.%d: link up\n",
-				 port->port, port->lane);
-		} else {
-			port->haslink = 0;
-			dev_info(&pdev->dev, "PCIe%d.%d: link down\n",
-				 port->port, port->lane);
+			ret = devm_gpio_request_one(&pdev->dev,
+			    port->reset_gpio, GPIOF_DIR_OUT, port->reset_name);
+			if (ret) {
+				if (ret == -EPROBE_DEFER)
+					return ret;
+				continue;
+			}
+
+			gpio_set_value(port->reset_gpio,
+				       (port->reset_active_low) ? 1 : 0);
+			msleep(reset_udelay/1000);
 		}
 
 		port->clk = of_clk_get_by_name(child, NULL);
 		if (IS_ERR(port->clk)) {
 			dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
 			       port->port, port->lane);
+			continue;
+		}
+
+		ret = clk_prepare_enable(port->clk);
+		if (ret)
+			continue;
+
+		port->base = mvebu_pcie_map_registers(pdev, child, port);
+		if (IS_ERR(port->base)) {
+			dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
+				port->port, port->lane);
+			port->base = NULL;
+			clk_disable_unprepare(port->clk);
+			continue;
+		}
+
+		mvebu_pcie_set_local_dev_nr(port, 1);
+
+		port->clk = of_clk_get_by_name(child, NULL);
+		if (IS_ERR(port->clk)) {
+			dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
+			       port->port, port->lane);
 			iounmap(port->base);
-			port->haslink = 0;
 			continue;
 		}
 
 		port->dn = child;
-
-		clk_prepare_enable(port->clk);
 		spin_lock_init(&port->conf_lock);
-
 		mvebu_sw_pci_bridge_init(port);
-
 		i++;
 	}
 
+	pcie->nports = i;
+	mvebu_pcie_msi_enable(pcie);
 	mvebu_pcie_enable(pcie);
 
 	return 0;
@@ -920,6 +986,7 @@
 static const struct of_device_id mvebu_pcie_of_match_table[] = {
 	{ .compatible = "marvell,armada-xp-pcie", },
 	{ .compatible = "marvell,armada-370-pcie", },
+	{ .compatible = "marvell,dove-pcie", },
 	{ .compatible = "marvell,kirkwood-pcie", },
 	{},
 };
@@ -931,16 +998,12 @@
 		.name = "mvebu-pcie",
 		.of_match_table =
 		   of_match_ptr(mvebu_pcie_of_match_table),
+		/* driver unloading/unbinding currently not supported */
+		.suppress_bind_attrs = true,
 	},
+	.probe = mvebu_pcie_probe,
 };
-
-static int __init mvebu_pcie_init(void)
-{
-	return platform_driver_probe(&mvebu_pcie_driver,
-				     mvebu_pcie_probe);
-}
-
-subsys_initcall(mvebu_pcie_init);
+module_platform_driver(mvebu_pcie_driver);
 
 MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
 MODULE_DESCRIPTION("Marvell EBU PCIe driver");
diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c
index 66e505c..3c7eb5d 100644
--- a/drivers/pci/hotplug/s390_pci_hpc.c
+++ b/drivers/pci/hotplug/s390_pci_hpc.c
@@ -133,7 +133,6 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	pr_debug("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot));
 	kfree(slot->hotplug_slot->info);
 	kfree(slot->hotplug_slot);
 	kfree(slot);
@@ -183,10 +182,9 @@
 	snprintf(name, SLOT_NAME_SIZE, "%08x", zdev->fid);
 	rc = pci_hp_register(slot->hotplug_slot, zdev->bus,
 			     ZPCI_DEVFN, name);
-	if (rc) {
-		pr_err("pci_hp_register failed with error %d\n", rc);
+	if (rc)
 		goto error_reg;
-	}
+
 	list_add(&slot->slot_list, &s390_hotplug_slot_list);
 	return 0;
 
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 98f7b9b..38f3c01 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -135,6 +135,7 @@
 		return retval;
 	return count;
 }
+static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
 
 /**
  * store_remove_id - remove a PCI device ID from this driver
@@ -180,12 +181,14 @@
 		return retval;
 	return count;
 }
+static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id);
 
-static struct driver_attribute pci_drv_attrs[] = {
-	__ATTR(new_id, S_IWUSR, NULL, store_new_id),
-	__ATTR(remove_id, S_IWUSR, NULL, store_remove_id),
-	__ATTR_NULL,
+static struct attribute *pci_drv_attrs[] = {
+	&driver_attr_new_id.attr,
+	&driver_attr_remove_id.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(pci_drv);
 
 /**
  * pci_match_id - See if a pci device matches a given pci_id table
@@ -1317,8 +1320,8 @@
 	.remove		= pci_device_remove,
 	.shutdown	= pci_device_shutdown,
 	.dev_attrs	= pci_dev_attrs,
-	.bus_attrs	= pci_bus_attrs,
-	.drv_attrs	= pci_drv_attrs,
+	.bus_groups	= pci_bus_groups,
+	.drv_groups	= pci_drv_groups,
 	.pm		= PCI_PM_OPS_PTR,
 };
 
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 7128cfd..d8eb880bd 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -302,10 +302,20 @@
 	}
 	return count;
 }
+static BUS_ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, bus_rescan_store);
 
-struct bus_attribute pci_bus_attrs[] = {
-	__ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, bus_rescan_store),
-	__ATTR_NULL
+struct attribute *pci_bus_attrs[] = {
+	&bus_attr_rescan.attr,
+	NULL,
+};
+
+static const struct attribute_group pci_bus_group = {
+	.attrs = pci_bus_attrs,
+};
+
+const struct attribute_group *pci_bus_groups[] = {
+	&pci_bus_group,
+	NULL,
 };
 
 static ssize_t
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 8a00c06..607be58 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -156,7 +156,7 @@
 extern struct device_attribute pci_dev_attrs[];
 extern const struct attribute_group *pcibus_groups[];
 extern struct device_type pci_dev_type;
-extern struct bus_attribute pci_bus_attrs[];
+extern const struct attribute_group *pci_bus_groups[];
 
 
 /**
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index b8f5acf..de24232 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -245,7 +245,7 @@
 }
 #endif
 
-static int __init at91_cf_probe(struct platform_device *pdev)
+static int at91_cf_probe(struct platform_device *pdev)
 {
 	struct at91_cf_socket	*cf;
 	struct at91_cf_data	*board = pdev->dev.platform_data;
@@ -354,7 +354,7 @@
 	return status;
 }
 
-static int __exit at91_cf_remove(struct platform_device *pdev)
+static int at91_cf_remove(struct platform_device *pdev)
 {
 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
 
@@ -404,14 +404,13 @@
 		.owner		= THIS_MODULE,
 		.of_match_table = of_match_ptr(at91_cf_dt_ids),
 	},
-	.remove		= __exit_p(at91_cf_remove),
+	.probe		= at91_cf_probe,
+	.remove		= at91_cf_remove,
 	.suspend	= at91_cf_suspend,
 	.resume		= at91_cf_resume,
 };
 
-/*--------------------------------------------------------------------------*/
-
-module_platform_driver_probe(at91_cf_driver, at91_cf_probe);
+module_platform_driver(at91_cf_driver);
 
 MODULE_DESCRIPTION("AT91 Compact Flash Driver");
 MODULE_AUTHOR("David Brownell");
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 2deacbb..757119b 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -992,16 +992,17 @@
 {									\
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);		\
 	return p_dev->test ? sprintf(buf, format, p_dev->field) : -ENODEV; \
-}
+}									\
+static DEVICE_ATTR_RO(field);
 
 #define pcmcia_device_stringattr(name, field)					\
 static ssize_t name##_show (struct device *dev, struct device_attribute *attr, char *buf)		\
 {									\
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);		\
 	return p_dev->field ? sprintf(buf, "%s\n", p_dev->field) : -ENODEV; \
-}
+}									\
+static DEVICE_ATTR_RO(name);
 
-pcmcia_device_attr(func, socket, "0x%02x\n");
 pcmcia_device_attr(func_id, has_func_id, "0x%02x\n");
 pcmcia_device_attr(manf_id, has_manf_id, "0x%04x\n");
 pcmcia_device_attr(card_id, has_card_id, "0x%04x\n");
@@ -1010,8 +1011,16 @@
 pcmcia_device_stringattr(prod_id3, prod_id[2]);
 pcmcia_device_stringattr(prod_id4, prod_id[3]);
 
-static ssize_t pcmcia_show_resources(struct device *dev,
-				     struct device_attribute *attr, char *buf)
+static ssize_t function_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
+	return p_dev->socket ? sprintf(buf, "0x%02x\n", p_dev->func) : -ENODEV;
+}
+static DEVICE_ATTR_RO(function);
+
+static ssize_t resources_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
 	char *str = buf;
@@ -1022,8 +1031,9 @@
 
 	return str - buf;
 }
+static DEVICE_ATTR_RO(resources);
 
-static ssize_t pcmcia_show_pm_state(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t pm_state_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
 
@@ -1033,8 +1043,8 @@
 		return sprintf(buf, "on\n");
 }
 
-static ssize_t pcmcia_store_pm_state(struct device *dev, struct device_attribute *attr,
-				     const char *buf, size_t count)
+static ssize_t pm_state_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
 	int ret = 0;
@@ -1049,7 +1059,7 @@
 
 	return ret ? ret : count;
 }
-
+static DEVICE_ATTR_RW(pm_state);
 
 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1072,8 +1082,9 @@
 				p_dev->func, p_dev->device_no,
 				hash[0], hash[1], hash[2], hash[3]);
 }
+static DEVICE_ATTR_RO(modalias);
 
-static ssize_t pcmcia_store_allow_func_id_match(struct device *dev,
+static ssize_t allow_func_id_match_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
@@ -1088,22 +1099,24 @@
 
 	return count;
 }
+static DEVICE_ATTR_WO(allow_func_id_match);
 
-static struct device_attribute pcmcia_dev_attrs[] = {
-	__ATTR(function, 0444, func_show, NULL),
-	__ATTR(pm_state, 0644, pcmcia_show_pm_state, pcmcia_store_pm_state),
-	__ATTR(resources, 0444, pcmcia_show_resources, NULL),
-	__ATTR_RO(func_id),
-	__ATTR_RO(manf_id),
-	__ATTR_RO(card_id),
-	__ATTR_RO(prod_id1),
-	__ATTR_RO(prod_id2),
-	__ATTR_RO(prod_id3),
-	__ATTR_RO(prod_id4),
-	__ATTR_RO(modalias),
-	__ATTR(allow_func_id_match, 0200, NULL, pcmcia_store_allow_func_id_match),
-	__ATTR_NULL,
+static struct attribute *pcmcia_dev_attrs[] = {
+	&dev_attr_resources.attr,
+	&dev_attr_pm_state.attr,
+	&dev_attr_function.attr,
+	&dev_attr_func_id.attr,
+	&dev_attr_manf_id.attr,
+	&dev_attr_card_id.attr,
+	&dev_attr_prod_id1.attr,
+	&dev_attr_prod_id2.attr,
+	&dev_attr_prod_id3.attr,
+	&dev_attr_prod_id4.attr,
+	&dev_attr_modalias.attr,
+	&dev_attr_allow_func_id_match.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(pcmcia_dev);
 
 /* PM support, also needed for reset */
 
@@ -1389,7 +1402,7 @@
 	.name = "pcmcia",
 	.uevent = pcmcia_bus_uevent,
 	.match = pcmcia_bus_match,
-	.dev_attrs = pcmcia_dev_attrs,
+	.dev_groups = pcmcia_dev_groups,
 	.probe = pcmcia_device_probe,
 	.remove = pcmcia_device_remove,
 	.suspend = pcmcia_dev_suspend,
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index a4c16ee..622dd6f 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -777,15 +777,4 @@
 	.remove		= pd6729_pci_remove,
 };
 
-static int pd6729_module_init(void)
-{
-	return pci_register_driver(&pd6729_pci_driver);
-}
-
-static void pd6729_module_exit(void)
-{
-	pci_unregister_driver(&pd6729_pci_driver);
-}
-
-module_init(pd6729_module_init);
-module_exit(pd6729_module_exit);
+module_pci_driver(pd6729_pci_driver);
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 6b4ff09..dc18a3a 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1439,20 +1439,6 @@
 	.driver.pm	= YENTA_PM_OPS,
 };
 
-
-static int __init yenta_socket_init(void)
-{
-	return pci_register_driver(&yenta_cardbus_driver);
-}
-
-
-static void __exit yenta_socket_exit(void)
-{
-	pci_unregister_driver(&yenta_cardbus_driver);
-}
-
-
-module_init(yenta_socket_init);
-module_exit(yenta_socket_exit);
+module_pci_driver(yenta_cardbus_driver);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
new file mode 100644
index 0000000..a344f3d
--- /dev/null
+++ b/drivers/phy/Kconfig
@@ -0,0 +1,54 @@
+#
+# PHY
+#
+
+menu "PHY Subsystem"
+
+config GENERIC_PHY
+	tristate "PHY Core"
+	help
+	  Generic PHY support.
+
+	  This framework is designed to provide a generic interface for PHY
+	  devices present in the kernel. This layer will have the generic
+	  API by which phy drivers can create PHY using the phy framework and
+	  phy users can obtain reference to the PHY. All the users of this
+	  framework should select this config.
+
+config PHY_EXYNOS_MIPI_VIDEO
+	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+	help
+	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+	  and EXYNOS SoCs.
+
+config OMAP_USB2
+	tristate "OMAP USB2 PHY Driver"
+	depends on ARCH_OMAP2PLUS
+	select GENERIC_PHY
+	select USB_PHY
+	select OMAP_CONTROL_USB
+	help
+	  Enable this to support the transceiver that is part of SOC. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  The USB OTG controller communicates with the comparator using this
+	  driver.
+
+config TWL4030_USB
+	tristate "TWL4030 USB Transceiver Driver"
+	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this to support the USB OTG transceiver on TWL4030
+	  family chips (including the TWL5030 and TPS659x0 devices).
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.
+
+config PHY_EXYNOS_DP_VIDEO
+	tristate "EXYNOS SoC series Display Port PHY driver"
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
+endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
new file mode 100644
index 0000000..d0caae9
--- /dev/null
+++ b/drivers/phy/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the phy drivers.
+#
+
+obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
+obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
+obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
new file mode 100644
index 0000000..03cf8fb
--- /dev/null
+++ b/drivers/phy/phy-core.c
@@ -0,0 +1,698 @@
+/*
+ * phy-core.c  --  Generic Phy framework.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/idr.h>
+#include <linux/pm_runtime.h>
+
+static struct class *phy_class;
+static DEFINE_MUTEX(phy_provider_mutex);
+static LIST_HEAD(phy_provider_list);
+static DEFINE_IDA(phy_ida);
+
+static void devm_phy_release(struct device *dev, void *res)
+{
+	struct phy *phy = *(struct phy **)res;
+
+	phy_put(phy);
+}
+
+static void devm_phy_provider_release(struct device *dev, void *res)
+{
+	struct phy_provider *phy_provider = *(struct phy_provider **)res;
+
+	of_phy_provider_unregister(phy_provider);
+}
+
+static void devm_phy_consume(struct device *dev, void *res)
+{
+	struct phy *phy = *(struct phy **)res;
+
+	phy_destroy(phy);
+}
+
+static int devm_phy_match(struct device *dev, void *res, void *match_data)
+{
+	return res == match_data;
+}
+
+static struct phy *phy_lookup(struct device *device, const char *port)
+{
+	unsigned int count;
+	struct phy *phy;
+	struct device *dev;
+	struct phy_consumer *consumers;
+	struct class_dev_iter iter;
+
+	class_dev_iter_init(&iter, phy_class, NULL, NULL);
+	while ((dev = class_dev_iter_next(&iter))) {
+		phy = to_phy(dev);
+		count = phy->init_data->num_consumers;
+		consumers = phy->init_data->consumers;
+		while (count--) {
+			if (!strcmp(consumers->dev_name, dev_name(device)) &&
+					!strcmp(consumers->port, port)) {
+				class_dev_iter_exit(&iter);
+				return phy;
+			}
+			consumers++;
+		}
+	}
+
+	class_dev_iter_exit(&iter);
+	return ERR_PTR(-ENODEV);
+}
+
+static struct phy_provider *of_phy_provider_lookup(struct device_node *node)
+{
+	struct phy_provider *phy_provider;
+
+	list_for_each_entry(phy_provider, &phy_provider_list, list) {
+		if (phy_provider->dev->of_node == node)
+			return phy_provider;
+	}
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+int phy_pm_runtime_get(struct phy *phy)
+{
+	if (!pm_runtime_enabled(&phy->dev))
+		return -ENOTSUPP;
+
+	return pm_runtime_get(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_pm_runtime_get);
+
+int phy_pm_runtime_get_sync(struct phy *phy)
+{
+	if (!pm_runtime_enabled(&phy->dev))
+		return -ENOTSUPP;
+
+	return pm_runtime_get_sync(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_pm_runtime_get_sync);
+
+int phy_pm_runtime_put(struct phy *phy)
+{
+	if (!pm_runtime_enabled(&phy->dev))
+		return -ENOTSUPP;
+
+	return pm_runtime_put(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_pm_runtime_put);
+
+int phy_pm_runtime_put_sync(struct phy *phy)
+{
+	if (!pm_runtime_enabled(&phy->dev))
+		return -ENOTSUPP;
+
+	return pm_runtime_put_sync(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_pm_runtime_put_sync);
+
+void phy_pm_runtime_allow(struct phy *phy)
+{
+	if (!pm_runtime_enabled(&phy->dev))
+		return;
+
+	pm_runtime_allow(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_pm_runtime_allow);
+
+void phy_pm_runtime_forbid(struct phy *phy)
+{
+	if (!pm_runtime_enabled(&phy->dev))
+		return;
+
+	pm_runtime_forbid(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_pm_runtime_forbid);
+
+int phy_init(struct phy *phy)
+{
+	int ret;
+
+	ret = phy_pm_runtime_get_sync(phy);
+	if (ret < 0 && ret != -ENOTSUPP)
+		return ret;
+
+	mutex_lock(&phy->mutex);
+	if (phy->init_count++ == 0 && phy->ops->init) {
+		ret = phy->ops->init(phy);
+		if (ret < 0) {
+			dev_err(&phy->dev, "phy init failed --> %d\n", ret);
+			goto out;
+		}
+	}
+
+out:
+	mutex_unlock(&phy->mutex);
+	phy_pm_runtime_put(phy);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_init);
+
+int phy_exit(struct phy *phy)
+{
+	int ret;
+
+	ret = phy_pm_runtime_get_sync(phy);
+	if (ret < 0 && ret != -ENOTSUPP)
+		return ret;
+
+	mutex_lock(&phy->mutex);
+	if (--phy->init_count == 0 && phy->ops->exit) {
+		ret = phy->ops->exit(phy);
+		if (ret < 0) {
+			dev_err(&phy->dev, "phy exit failed --> %d\n", ret);
+			goto out;
+		}
+	}
+
+out:
+	mutex_unlock(&phy->mutex);
+	phy_pm_runtime_put(phy);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_exit);
+
+int phy_power_on(struct phy *phy)
+{
+	int ret = -ENOTSUPP;
+
+	ret = phy_pm_runtime_get_sync(phy);
+	if (ret < 0 && ret != -ENOTSUPP)
+		return ret;
+
+	mutex_lock(&phy->mutex);
+	if (phy->power_count++ == 0 && phy->ops->power_on) {
+		ret = phy->ops->power_on(phy);
+		if (ret < 0) {
+			dev_err(&phy->dev, "phy poweron failed --> %d\n", ret);
+			goto out;
+		}
+	}
+
+out:
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_power_on);
+
+int phy_power_off(struct phy *phy)
+{
+	int ret = -ENOTSUPP;
+
+	mutex_lock(&phy->mutex);
+	if (--phy->power_count == 0 && phy->ops->power_off) {
+		ret =  phy->ops->power_off(phy);
+		if (ret < 0) {
+			dev_err(&phy->dev, "phy poweroff failed --> %d\n", ret);
+			goto out;
+		}
+	}
+
+out:
+	mutex_unlock(&phy->mutex);
+	phy_pm_runtime_put(phy);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_power_off);
+
+/**
+ * of_phy_get() - lookup and obtain a reference to a phy by phandle
+ * @dev: device that requests this phy
+ * @index: the index of the phy
+ *
+ * Returns the phy associated with the given phandle value,
+ * after getting a refcount to it or -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if there is a phandle to the phy, but the device is
+ * not yet loaded. This function uses of_xlate call back function provided
+ * while registering the phy_provider to find the phy instance.
+ */
+static struct phy *of_phy_get(struct device *dev, int index)
+{
+	int ret;
+	struct phy_provider *phy_provider;
+	struct phy *phy = NULL;
+	struct of_phandle_args args;
+
+	ret = of_parse_phandle_with_args(dev->of_node, "phys", "#phy-cells",
+		index, &args);
+	if (ret) {
+		dev_dbg(dev, "failed to get phy in %s node\n",
+			dev->of_node->full_name);
+		return ERR_PTR(-ENODEV);
+	}
+
+	mutex_lock(&phy_provider_mutex);
+	phy_provider = of_phy_provider_lookup(args.np);
+	if (IS_ERR(phy_provider) || !try_module_get(phy_provider->owner)) {
+		phy = ERR_PTR(-EPROBE_DEFER);
+		goto err0;
+	}
+
+	phy = phy_provider->of_xlate(phy_provider->dev, &args);
+	module_put(phy_provider->owner);
+
+err0:
+	mutex_unlock(&phy_provider_mutex);
+	of_node_put(args.np);
+
+	return phy;
+}
+
+/**
+ * phy_put() - release the PHY
+ * @phy: the phy returned by phy_get()
+ *
+ * Releases a refcount the caller received from phy_get().
+ */
+void phy_put(struct phy *phy)
+{
+	if (IS_ERR(phy))
+		return;
+
+	module_put(phy->ops->owner);
+	put_device(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_put);
+
+/**
+ * devm_phy_put() - release the PHY
+ * @dev: device that wants to release this phy
+ * @phy: the phy returned by devm_phy_get()
+ *
+ * destroys the devres associated with this phy and invokes phy_put
+ * to release the phy.
+ */
+void devm_phy_put(struct device *dev, struct phy *phy)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_phy_release, devm_phy_match, phy);
+	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_phy_put);
+
+/**
+ * of_phy_simple_xlate() - returns the phy instance from phy provider
+ * @dev: the PHY provider device
+ * @args: of_phandle_args (not used here)
+ *
+ * Intended to be used by phy provider for the common case where #phy-cells is
+ * 0. For other cases where #phy-cells is greater than '0', the phy provider
+ * should provide a custom of_xlate function that reads the *args* and returns
+ * the appropriate phy.
+ */
+struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args
+	*args)
+{
+	struct phy *phy;
+	struct class_dev_iter iter;
+	struct device_node *node = dev->of_node;
+
+	class_dev_iter_init(&iter, phy_class, NULL, NULL);
+	while ((dev = class_dev_iter_next(&iter))) {
+		phy = to_phy(dev);
+		if (node != phy->dev.of_node)
+			continue;
+
+		class_dev_iter_exit(&iter);
+		return phy;
+	}
+
+	class_dev_iter_exit(&iter);
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(of_phy_simple_xlate);
+
+/**
+ * phy_get() - lookup and obtain a reference to a phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or the name of the controller
+ * port for non-dt case
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling phy_put() to release that count.
+ */
+struct phy *phy_get(struct device *dev, const char *string)
+{
+	int index = 0;
+	struct phy *phy = NULL;
+
+	if (string == NULL) {
+		dev_WARN(dev, "missing string\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (dev->of_node) {
+		index = of_property_match_string(dev->of_node, "phy-names",
+			string);
+		phy = of_phy_get(dev, index);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "unable to find phy\n");
+			return phy;
+		}
+	} else {
+		phy = phy_lookup(dev, string);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "unable to find phy\n");
+			return phy;
+		}
+	}
+
+	if (!try_module_get(phy->ops->owner))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	get_device(&phy->dev);
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(phy_get);
+
+/**
+ * devm_phy_get() - lookup and obtain a reference to a phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or phy device name
+ * for non-dt case
+ *
+ * Gets the phy using phy_get(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ */
+struct phy *devm_phy_get(struct device *dev, const char *string)
+{
+	struct phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	phy = phy_get(dev, string);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_phy_get);
+
+/**
+ * phy_create() - create a new phy
+ * @dev: device that is creating the new phy
+ * @ops: function pointers for performing phy operations
+ * @init_data: contains the list of PHY consumers or NULL
+ *
+ * Called to create a phy using phy framework.
+ */
+struct phy *phy_create(struct device *dev, const struct phy_ops *ops,
+	struct phy_init_data *init_data)
+{
+	int ret;
+	int id;
+	struct phy *phy;
+
+	if (!dev) {
+		dev_WARN(dev, "no device provided for PHY\n");
+		ret = -EINVAL;
+		goto err0;
+	}
+
+	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	id = ida_simple_get(&phy_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		dev_err(dev, "unable to get id\n");
+		ret = id;
+		goto err0;
+	}
+
+	device_initialize(&phy->dev);
+	mutex_init(&phy->mutex);
+
+	phy->dev.class = phy_class;
+	phy->dev.parent = dev;
+	phy->dev.of_node = dev->of_node;
+	phy->id = id;
+	phy->ops = ops;
+	phy->init_data = init_data;
+
+	ret = dev_set_name(&phy->dev, "phy-%s.%d", dev_name(dev), id);
+	if (ret)
+		goto err1;
+
+	ret = device_add(&phy->dev);
+	if (ret)
+		goto err1;
+
+	if (pm_runtime_enabled(dev)) {
+		pm_runtime_enable(&phy->dev);
+		pm_runtime_no_callbacks(&phy->dev);
+	}
+
+	return phy;
+
+err1:
+	ida_remove(&phy_ida, phy->id);
+	put_device(&phy->dev);
+	kfree(phy);
+
+err0:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(phy_create);
+
+/**
+ * devm_phy_create() - create a new phy
+ * @dev: device that is creating the new phy
+ * @ops: function pointers for performing phy operations
+ * @init_data: contains the list of PHY consumers or NULL
+ *
+ * Creates a new PHY device adding it to the PHY class.
+ * While at that, it also associates the device with the phy using devres.
+ * On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ */
+struct phy *devm_phy_create(struct device *dev, const struct phy_ops *ops,
+	struct phy_init_data *init_data)
+{
+	struct phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_phy_consume, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	phy = phy_create(dev, ops, init_data);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_phy_create);
+
+/**
+ * phy_destroy() - destroy the phy
+ * @phy: the phy to be destroyed
+ *
+ * Called to destroy the phy.
+ */
+void phy_destroy(struct phy *phy)
+{
+	pm_runtime_disable(&phy->dev);
+	device_unregister(&phy->dev);
+}
+EXPORT_SYMBOL_GPL(phy_destroy);
+
+/**
+ * devm_phy_destroy() - destroy the PHY
+ * @dev: device that wants to release this phy
+ * @phy: the phy returned by devm_phy_get()
+ *
+ * destroys the devres associated with this phy and invokes phy_destroy
+ * to destroy the phy.
+ */
+void devm_phy_destroy(struct device *dev, struct phy *phy)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_phy_consume, devm_phy_match, phy);
+	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_phy_destroy);
+
+/**
+ * __of_phy_provider_register() - create/register phy provider with the framework
+ * @dev: struct device of the phy provider
+ * @owner: the module owner containing of_xlate
+ * @of_xlate: function pointer to obtain phy instance from phy provider
+ *
+ * Creates struct phy_provider from dev and of_xlate function pointer.
+ * This is used in the case of dt boot for finding the phy instance from
+ * phy provider.
+ */
+struct phy_provider *__of_phy_provider_register(struct device *dev,
+	struct module *owner, struct phy * (*of_xlate)(struct device *dev,
+	struct of_phandle_args *args))
+{
+	struct phy_provider *phy_provider;
+
+	phy_provider = kzalloc(sizeof(*phy_provider), GFP_KERNEL);
+	if (!phy_provider)
+		return ERR_PTR(-ENOMEM);
+
+	phy_provider->dev = dev;
+	phy_provider->owner = owner;
+	phy_provider->of_xlate = of_xlate;
+
+	mutex_lock(&phy_provider_mutex);
+	list_add_tail(&phy_provider->list, &phy_provider_list);
+	mutex_unlock(&phy_provider_mutex);
+
+	return phy_provider;
+}
+EXPORT_SYMBOL_GPL(__of_phy_provider_register);
+
+/**
+ * __devm_of_phy_provider_register() - create/register phy provider with the
+ * framework
+ * @dev: struct device of the phy provider
+ * @owner: the module owner containing of_xlate
+ * @of_xlate: function pointer to obtain phy instance from phy provider
+ *
+ * Creates struct phy_provider from dev and of_xlate function pointer.
+ * This is used in the case of dt boot for finding the phy instance from
+ * phy provider. While at that, it also associates the device with the
+ * phy provider using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ */
+struct phy_provider *__devm_of_phy_provider_register(struct device *dev,
+	struct module *owner, struct phy * (*of_xlate)(struct device *dev,
+	struct of_phandle_args *args))
+{
+	struct phy_provider **ptr, *phy_provider;
+
+	ptr = devres_alloc(devm_phy_provider_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	phy_provider = __of_phy_provider_register(dev, owner, of_xlate);
+	if (!IS_ERR(phy_provider)) {
+		*ptr = phy_provider;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return phy_provider;
+}
+EXPORT_SYMBOL_GPL(__devm_of_phy_provider_register);
+
+/**
+ * of_phy_provider_unregister() - unregister phy provider from the framework
+ * @phy_provider: phy provider returned by of_phy_provider_register()
+ *
+ * Removes the phy_provider created using of_phy_provider_register().
+ */
+void of_phy_provider_unregister(struct phy_provider *phy_provider)
+{
+	if (IS_ERR(phy_provider))
+		return;
+
+	mutex_lock(&phy_provider_mutex);
+	list_del(&phy_provider->list);
+	kfree(phy_provider);
+	mutex_unlock(&phy_provider_mutex);
+}
+EXPORT_SYMBOL_GPL(of_phy_provider_unregister);
+
+/**
+ * devm_of_phy_provider_unregister() - remove phy provider from the framework
+ * @dev: struct device of the phy provider
+ *
+ * destroys the devres associated with this phy provider and invokes
+ * of_phy_provider_unregister to unregister the phy provider.
+ */
+void devm_of_phy_provider_unregister(struct device *dev,
+	struct phy_provider *phy_provider) {
+	int r;
+
+	r = devres_destroy(dev, devm_phy_provider_release, devm_phy_match,
+		phy_provider);
+	dev_WARN_ONCE(dev, r, "couldn't find PHY provider device resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_of_phy_provider_unregister);
+
+/**
+ * phy_release() - release the phy
+ * @dev: the dev member within phy
+ *
+ * When the last reference to the device is removed, it is called
+ * from the embedded kobject as release method.
+ */
+static void phy_release(struct device *dev)
+{
+	struct phy *phy;
+
+	phy = to_phy(dev);
+	dev_vdbg(dev, "releasing '%s'\n", dev_name(dev));
+	ida_remove(&phy_ida, phy->id);
+	kfree(phy);
+}
+
+static int __init phy_core_init(void)
+{
+	phy_class = class_create(THIS_MODULE, "phy");
+	if (IS_ERR(phy_class)) {
+		pr_err("failed to create phy class --> %ld\n",
+			PTR_ERR(phy_class));
+		return PTR_ERR(phy_class);
+	}
+
+	phy_class->dev_release = phy_release;
+
+	return 0;
+}
+module_init(phy_core_init);
+
+static void __exit phy_core_exit(void)
+{
+	class_destroy(phy_class);
+}
+module_exit(phy_core_exit);
+
+MODULE_DESCRIPTION("Generic PHY Framework");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
new file mode 100644
index 0000000..1dbe6ce
--- /dev/null
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -0,0 +1,111 @@
+/*
+ * Samsung EXYNOS SoC series Display Port PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* DPTX_PHY_CONTROL register */
+#define EXYNOS_DPTX_PHY_ENABLE		(1 << 0)
+
+struct exynos_dp_video_phy {
+	void __iomem *regs;
+};
+
+static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
+{
+	u32 reg;
+
+	reg = readl(state->regs);
+	if (on)
+		reg |= EXYNOS_DPTX_PHY_ENABLE;
+	else
+		reg &= ~EXYNOS_DPTX_PHY_ENABLE;
+	writel(reg, state->regs);
+
+	return 0;
+}
+
+static int exynos_dp_video_phy_power_on(struct phy *phy)
+{
+	struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+	return __set_phy_state(state, 1);
+}
+
+static int exynos_dp_video_phy_power_off(struct phy *phy)
+{
+	struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+	return __set_phy_state(state, 0);
+}
+
+static struct phy_ops exynos_dp_video_phy_ops = {
+	.power_on	= exynos_dp_video_phy_power_on,
+	.power_off	= exynos_dp_video_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int exynos_dp_video_phy_probe(struct platform_device *pdev)
+{
+	struct exynos_dp_video_phy *state;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	struct phy *phy;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	state->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	phy = devm_phy_create(dev, &exynos_dp_video_phy_ops, NULL);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create Display Port PHY\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, state);
+
+	return 0;
+}
+
+static const struct of_device_id exynos_dp_video_phy_of_match[] = {
+	{ .compatible = "samsung,exynos5250-dp-video-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
+
+static struct platform_driver exynos_dp_video_phy_driver = {
+	.probe	= exynos_dp_video_phy_probe,
+	.driver = {
+		.name	= "exynos-dp-video-phy",
+		.owner	= THIS_MODULE,
+		.of_match_table	= exynos_dp_video_phy_of_match,
+	}
+};
+module_platform_driver(exynos_dp_video_phy_driver);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
new file mode 100644
index 0000000..0c5efab
--- /dev/null
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -0,0 +1,176 @@
+/*
+ * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
+#define EXYNOS_MIPI_PHY_CONTROL(n)	((n) * 4)
+#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
+#define EXYNOS_MIPI_PHY_RESET_MASK	(3 << 1)
+
+enum exynos_mipi_phy_id {
+	EXYNOS_MIPI_PHY_ID_CSIS0,
+	EXYNOS_MIPI_PHY_ID_DSIM0,
+	EXYNOS_MIPI_PHY_ID_CSIS1,
+	EXYNOS_MIPI_PHY_ID_DSIM1,
+	EXYNOS_MIPI_PHYS_NUM
+};
+
+#define is_mipi_dsim_phy_id(id) \
+	((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1)
+
+struct exynos_mipi_video_phy {
+	spinlock_t slock;
+	struct video_phy_desc {
+		struct phy *phy;
+		unsigned int index;
+	} phys[EXYNOS_MIPI_PHYS_NUM];
+	void __iomem *regs;
+};
+
+static int __set_phy_state(struct exynos_mipi_video_phy *state,
+			enum exynos_mipi_phy_id id, unsigned int on)
+{
+	void __iomem *addr;
+	u32 reg, reset;
+
+	addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
+
+	if (is_mipi_dsim_phy_id(id))
+		reset = EXYNOS_MIPI_PHY_MRESETN;
+	else
+		reset = EXYNOS_MIPI_PHY_SRESETN;
+
+	spin_lock(&state->slock);
+	reg = readl(addr);
+	if (on)
+		reg |= reset;
+	else
+		reg &= ~reset;
+	writel(reg, addr);
+
+	/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */
+	if (on)
+		reg |= EXYNOS_MIPI_PHY_ENABLE;
+	else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK))
+		reg &= ~EXYNOS_MIPI_PHY_ENABLE;
+
+	writel(reg, addr);
+	spin_unlock(&state->slock);
+	return 0;
+}
+
+#define to_mipi_video_phy(desc) \
+	container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]);
+
+static int exynos_mipi_video_phy_power_on(struct phy *phy)
+{
+	struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
+	struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
+
+	return __set_phy_state(state, phy_desc->index, 1);
+}
+
+static int exynos_mipi_video_phy_power_off(struct phy *phy)
+{
+	struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
+	struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
+
+	return __set_phy_state(state, phy_desc->index, 0);
+}
+
+static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] > EXYNOS_MIPI_PHYS_NUM))
+		return ERR_PTR(-ENODEV);
+
+	return state->phys[args->args[0]].phy;
+}
+
+static struct phy_ops exynos_mipi_video_phy_ops = {
+	.power_on	= exynos_mipi_video_phy_power_on,
+	.power_off	= exynos_mipi_video_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
+{
+	struct exynos_mipi_video_phy *state;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	unsigned int i;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	state->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	dev_set_drvdata(dev, state);
+	spin_lock_init(&state->slock);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+					exynos_mipi_video_phy_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
+		struct phy *phy = devm_phy_create(dev,
+					&exynos_mipi_video_phy_ops, NULL);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create PHY %d\n", i);
+			return PTR_ERR(phy);
+		}
+
+		state->phys[i].phy = phy;
+		state->phys[i].index = i;
+		phy_set_drvdata(phy, &state->phys[i]);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
+	{ .compatible = "samsung,s5pv210-mipi-video-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
+
+static struct platform_driver exynos_mipi_video_phy_driver = {
+	.probe	= exynos_mipi_video_phy_probe,
+	.driver = {
+		.of_match_table	= exynos_mipi_video_phy_of_match,
+		.name  = "exynos-mipi-video-phy",
+		.owner = THIS_MODULE,
+	}
+};
+module_platform_driver(exynos_mipi_video_phy_driver);
+
+MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
similarity index 81%
rename from drivers/usb/phy/phy-omap-usb2.c
rename to drivers/phy/phy-omap-usb2.c
index d266861..bfc5c33 100644
--- a/drivers/usb/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -28,6 +28,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
 #include <linux/usb/omap_control_usb.h>
+#include <linux/phy/phy.h>
+#include <linux/of_platform.h>
 
 /**
  * omap_usb2_set_comparator - links the comparator present in the sytem with
@@ -118,10 +120,42 @@
 	return 0;
 }
 
+static int omap_usb_power_off(struct phy *x)
+{
+	struct omap_usb *phy = phy_get_drvdata(x);
+
+	omap_control_usb_phy_power(phy->control_dev, 0);
+
+	return 0;
+}
+
+static int omap_usb_power_on(struct phy *x)
+{
+	struct omap_usb *phy = phy_get_drvdata(x);
+
+	omap_control_usb_phy_power(phy->control_dev, 1);
+
+	return 0;
+}
+
+static struct phy_ops ops = {
+	.power_on	= omap_usb_power_on,
+	.power_off	= omap_usb_power_off,
+	.owner		= THIS_MODULE,
+};
+
 static int omap_usb2_probe(struct platform_device *pdev)
 {
-	struct omap_usb			*phy;
-	struct usb_otg			*otg;
+	struct omap_usb	*phy;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct usb_otg *otg;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *control_node;
+	struct platform_device *control_pdev;
+
+	if (!node)
+		return -EINVAL;
 
 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy) {
@@ -143,12 +177,25 @@
 	phy->phy.otg		= otg;
 	phy->phy.type		= USB_PHY_TYPE_USB2;
 
-	phy->control_dev = omap_get_control_dev();
-	if (IS_ERR(phy->control_dev)) {
-		dev_dbg(&pdev->dev, "Failed to get control device\n");
-		return -ENODEV;
+	phy_provider = devm_of_phy_provider_register(phy->dev,
+			of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	control_node = of_parse_phandle(node, "ctrl-module", 0);
+	if (!control_node) {
+		dev_err(&pdev->dev, "Failed to get control device phandle\n");
+		return -EINVAL;
 	}
 
+	control_pdev = of_find_device_by_node(control_node);
+	if (!control_pdev) {
+		dev_err(&pdev->dev, "Failed to get control device\n");
+		return -EINVAL;
+	}
+
+	phy->control_dev = &control_pdev->dev;
+
 	phy->is_suspended	= 1;
 	omap_control_usb_phy_power(phy->control_dev, 0);
 
@@ -158,6 +205,15 @@
 	otg->start_srp		= omap_usb_start_srp;
 	otg->phy		= &phy->phy;
 
+	platform_set_drvdata(pdev, phy);
+	pm_runtime_enable(phy->dev);
+
+	generic_phy = devm_phy_create(phy->dev, &ops, NULL);
+	if (IS_ERR(generic_phy))
+		return PTR_ERR(generic_phy);
+
+	phy_set_drvdata(generic_phy, phy);
+
 	phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
 	if (IS_ERR(phy->wkupclk)) {
 		dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
@@ -173,10 +229,6 @@
 
 	usb_add_phy_dev(&phy->phy);
 
-	platform_set_drvdata(pdev, phy);
-
-	pm_runtime_enable(phy->dev);
-
 	return 0;
 }
 
diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
similarity index 94%
rename from drivers/usb/phy/phy-twl4030-usb.c
rename to drivers/phy/phy-twl4030-usb.c
index 90730c8..daf65e6 100644
--- a/drivers/usb/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
 #include <linux/usb/musb-omap.h>
 #include <linux/usb/ulpi.h>
 #include <linux/i2c/twl.h>
@@ -421,17 +422,20 @@
 	}
 }
 
-static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
+static int twl4030_phy_power_off(struct phy *phy)
 {
+	struct twl4030_usb *twl = phy_get_drvdata(phy);
+
 	if (twl->asleep)
-		return;
+		return 0;
 
 	twl4030_phy_power(twl, 0);
 	twl->asleep = 1;
 	dev_dbg(twl->dev, "%s\n", __func__);
+	return 0;
 }
 
-static void __twl4030_phy_resume(struct twl4030_usb *twl)
+static void __twl4030_phy_power_on(struct twl4030_usb *twl)
 {
 	twl4030_phy_power(twl, 1);
 	twl4030_i2c_access(twl, 1);
@@ -440,11 +444,13 @@
 		twl4030_i2c_access(twl, 0);
 }
 
-static void twl4030_phy_resume(struct twl4030_usb *twl)
+static int twl4030_phy_power_on(struct phy *phy)
 {
+	struct twl4030_usb *twl = phy_get_drvdata(phy);
+
 	if (!twl->asleep)
-		return;
-	__twl4030_phy_resume(twl);
+		return 0;
+	__twl4030_phy_power_on(twl);
 	twl->asleep = 0;
 	dev_dbg(twl->dev, "%s\n", __func__);
 
@@ -457,6 +463,7 @@
 		cancel_delayed_work(&twl->id_workaround_work);
 		schedule_delayed_work(&twl->id_workaround_work, HZ);
 	}
+	return 0;
 }
 
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -587,9 +594,9 @@
 	}
 }
 
-static int twl4030_usb_phy_init(struct usb_phy *phy)
+static int twl4030_phy_init(struct phy *phy)
 {
-	struct twl4030_usb *twl = phy_to_twl(phy);
+	struct twl4030_usb *twl = phy_get_drvdata(phy);
 	enum omap_musb_vbus_id_status status;
 
 	/*
@@ -602,25 +609,15 @@
 	status = twl4030_usb_linkstat(twl);
 	twl->linkstat = status;
 
-	if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID)
+	if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) {
 		omap_musb_mailbox(twl->linkstat);
+		twl4030_phy_power_on(phy);
+	}
 
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 	return 0;
 }
 
-static int twl4030_set_suspend(struct usb_phy *x, int suspend)
-{
-	struct twl4030_usb *twl = phy_to_twl(x);
-
-	if (suspend)
-		twl4030_phy_suspend(twl, 1);
-	else
-		twl4030_phy_resume(twl);
-
-	return 0;
-}
-
 static int twl4030_set_peripheral(struct usb_otg *otg,
 					struct usb_gadget *gadget)
 {
@@ -646,13 +643,23 @@
 	return 0;
 }
 
+static const struct phy_ops ops = {
+	.init		= twl4030_phy_init,
+	.power_on	= twl4030_phy_power_on,
+	.power_off	= twl4030_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
 static int twl4030_usb_probe(struct platform_device *pdev)
 {
 	struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
 	struct twl4030_usb	*twl;
+	struct phy		*phy;
 	int			status, err;
 	struct usb_otg		*otg;
 	struct device_node	*np = pdev->dev.of_node;
+	struct phy_provider	*phy_provider;
+	struct phy_init_data	*init_data = NULL;
 
 	twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
 	if (!twl)
@@ -661,9 +668,10 @@
 	if (np)
 		of_property_read_u32(np, "usb_mode",
 				(enum twl4030_usb_mode *)&twl->usb_mode);
-	else if (pdata)
+	else if (pdata) {
 		twl->usb_mode = pdata->usb_mode;
-	else {
+		init_data = pdata->init_data;
+	} else {
 		dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
 		return -EINVAL;
 	}
@@ -682,13 +690,24 @@
 	twl->phy.label		= "twl4030";
 	twl->phy.otg		= otg;
 	twl->phy.type		= USB_PHY_TYPE_USB2;
-	twl->phy.set_suspend	= twl4030_set_suspend;
-	twl->phy.init		= twl4030_usb_phy_init;
 
 	otg->phy		= &twl->phy;
 	otg->set_host		= twl4030_set_host;
 	otg->set_peripheral	= twl4030_set_peripheral;
 
+	phy_provider = devm_of_phy_provider_register(twl->dev,
+		of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	phy = devm_phy_create(twl->dev, &ops, init_data);
+	if (IS_ERR(phy)) {
+		dev_dbg(&pdev->dev, "Failed to create PHY\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, twl);
+
 	/* init spinlock for workqueue */
 	spin_lock_init(&twl->lock);
 
@@ -705,6 +724,8 @@
 	if (device_create_file(&pdev->dev, &dev_attr_vbus))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
+	ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
+
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
 	 *
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index a82ace4..0846922 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -15,15 +15,21 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/list.h>
+#include <linux/interrupt.h>
+
+#include <linux/irqchip/chained_irq.h>
 
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/pinconf-generic.h>
 
+#include <linux/platform_data/pinctrl-single.h>
+
 #include "core.h"
 #include "pinconf.h"
 
@@ -150,19 +156,36 @@
 };
 
 /**
+ * struct pcs_soc_data - SoC specific settings
+ * @flags:	initial SoC specific PCS_FEAT_xxx values
+ * @irq:	optional interrupt for the controller
+ * @irq_enable_mask:	optional SoC specific interrupt enable mask
+ * @irq_status_mask:	optional SoC specific interrupt status mask
+ * @rearm:	optional SoC specific wake-up rearm function
+ */
+struct pcs_soc_data {
+	unsigned flags;
+	int irq;
+	unsigned irq_enable_mask;
+	unsigned irq_status_mask;
+	void (*rearm)(void);
+};
+
+/**
  * struct pcs_device - pinctrl device instance
  * @res:	resources
  * @base:	virtual address of the controller
  * @size:	size of the ioremapped area
  * @dev:	device entry
  * @pctl:	pin controller device
+ * @flags:	mask of PCS_FEAT_xxx values
+ * @lock:	spinlock for register access
  * @mutex:	mutex protecting the lists
  * @width:	bits per mux register
  * @fmask:	function register mask
  * @fshift:	function register shift
  * @foff:	value to turn mux off
  * @fmax:	max number of functions in fmask
- * @is_pinconf:	whether supports pinconf
  * @bits_per_pin:number of bits per pin
  * @names:	array of register names for pins
  * @pins:	physical pins on the SoC
@@ -171,6 +194,9 @@
  * @pingroups:	list of pingroups
  * @functions:	list of functions
  * @gpiofuncs:	list of gpio functions
+ * @irqs:	list of interrupt registers
+ * @chip:	chip container for this instance
+ * @domain:	IRQ domain for this instance
  * @ngroups:	number of pingroups
  * @nfuncs:	number of functions
  * @desc:	pin controller descriptor
@@ -183,6 +209,12 @@
 	unsigned size;
 	struct device *dev;
 	struct pinctrl_dev *pctl;
+	unsigned flags;
+#define PCS_QUIRK_SHARED_IRQ	(1 << 2)
+#define PCS_FEAT_IRQ		(1 << 1)
+#define PCS_FEAT_PINCONF	(1 << 0)
+	struct pcs_soc_data socdata;
+	raw_spinlock_t lock;
 	struct mutex mutex;
 	unsigned width;
 	unsigned fmask;
@@ -190,7 +222,6 @@
 	unsigned foff;
 	unsigned fmax;
 	bool bits_per_mux;
-	bool is_pinconf;
 	unsigned bits_per_pin;
 	struct pcs_name *names;
 	struct pcs_data pins;
@@ -199,6 +230,9 @@
 	struct list_head pingroups;
 	struct list_head functions;
 	struct list_head gpiofuncs;
+	struct list_head irqs;
+	struct irq_chip chip;
+	struct irq_domain *domain;
 	unsigned ngroups;
 	unsigned nfuncs;
 	struct pinctrl_desc desc;
@@ -206,6 +240,10 @@
 	void (*write)(unsigned val, void __iomem *reg);
 };
 
+#define PCS_QUIRK_HAS_SHARED_IRQ	(pcs->flags & PCS_QUIRK_SHARED_IRQ)
+#define PCS_HAS_IRQ		(pcs->flags & PCS_FEAT_IRQ)
+#define PCS_HAS_PINCONF		(pcs->flags & PCS_FEAT_PINCONF)
+
 static int pcs_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
 			   unsigned long *config);
 static int pcs_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
@@ -429,9 +467,11 @@
 
 	for (i = 0; i < func->nvals; i++) {
 		struct pcs_func_vals *vals;
+		unsigned long flags;
 		unsigned val, mask;
 
 		vals = &func->vals[i];
+		raw_spin_lock_irqsave(&pcs->lock, flags);
 		val = pcs->read(vals->reg);
 
 		if (pcs->bits_per_mux)
@@ -442,6 +482,7 @@
 		val &= ~mask;
 		val |= (vals->val & mask);
 		pcs->write(val, vals->reg);
+		raw_spin_unlock_irqrestore(&pcs->lock, flags);
 	}
 
 	return 0;
@@ -483,13 +524,16 @@
 
 	for (i = 0; i < func->nvals; i++) {
 		struct pcs_func_vals *vals;
+		unsigned long flags;
 		unsigned val;
 
 		vals = &func->vals[i];
+		raw_spin_lock_irqsave(&pcs->lock, flags);
 		val = pcs->read(vals->reg);
 		val &= ~pcs->fmask;
 		val |= pcs->foff << pcs->fshift;
 		pcs->write(val, vals->reg);
+		raw_spin_unlock_irqrestore(&pcs->lock, flags);
 	}
 }
 
@@ -1060,7 +1104,7 @@
 	};
 
 	/* If pinconf isn't supported, don't parse properties in below. */
-	if (!pcs->is_pinconf)
+	if (!PCS_HAS_PINCONF)
 		return 0;
 
 	/* cacluate how much properties are supported in current node */
@@ -1184,7 +1228,7 @@
 	(*map)->data.mux.group = np->name;
 	(*map)->data.mux.function = np->name;
 
-	if (pcs->is_pinconf) {
+	if (PCS_HAS_PINCONF) {
 		res = pcs_parse_pinconf(pcs, np, function, map);
 		if (res)
 			goto free_pingroups;
@@ -1305,7 +1349,7 @@
 	(*map)->data.mux.group = np->name;
 	(*map)->data.mux.function = np->name;
 
-	if (pcs->is_pinconf) {
+	if (PCS_HAS_PINCONF) {
 		dev_err(pcs->dev, "pinconf not supported\n");
 		goto free_pingroups;
 	}
@@ -1440,11 +1484,33 @@
 }
 
 /**
+ * pcs_irq_free() - free interrupt
+ * @pcs: pcs driver instance
+ */
+static void pcs_irq_free(struct pcs_device *pcs)
+{
+	struct pcs_soc_data *pcs_soc = &pcs->socdata;
+
+	if (pcs_soc->irq < 0)
+		return;
+
+	if (pcs->domain)
+		irq_domain_remove(pcs->domain);
+
+	if (PCS_QUIRK_HAS_SHARED_IRQ)
+		free_irq(pcs_soc->irq, pcs_soc);
+	else
+		irq_set_chained_handler(pcs_soc->irq, NULL);
+}
+
+/**
  * pcs_free_resources() - free memory used by this driver
  * @pcs: pcs driver instance
  */
 static void pcs_free_resources(struct pcs_device *pcs)
 {
+	pcs_irq_free(pcs);
+
 	if (pcs->pctl)
 		pinctrl_unregister(pcs->pctl);
 
@@ -1493,6 +1559,268 @@
 	}
 	return ret;
 }
+/**
+ * @reg:	virtual address of interrupt register
+ * @hwirq:	hardware irq number
+ * @irq:	virtual irq number
+ * @node:	list node
+ */
+struct pcs_interrupt {
+	void __iomem *reg;
+	irq_hw_number_t hwirq;
+	unsigned int irq;
+	struct list_head node;
+};
+
+/**
+ * pcs_irq_set() - enables or disables an interrupt
+ *
+ * Note that this currently assumes one interrupt per pinctrl
+ * register that is typically used for wake-up events.
+ */
+static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc,
+			       int irq, const bool enable)
+{
+	struct pcs_device *pcs;
+	struct list_head *pos;
+	unsigned mask;
+
+	pcs = container_of(pcs_soc, struct pcs_device, socdata);
+	list_for_each(pos, &pcs->irqs) {
+		struct pcs_interrupt *pcswi;
+		unsigned soc_mask;
+
+		pcswi = list_entry(pos, struct pcs_interrupt, node);
+		if (irq != pcswi->irq)
+			continue;
+
+		soc_mask = pcs_soc->irq_enable_mask;
+		raw_spin_lock(&pcs->lock);
+		mask = pcs->read(pcswi->reg);
+		if (enable)
+			mask |= soc_mask;
+		else
+			mask &= ~soc_mask;
+		pcs->write(mask, pcswi->reg);
+		raw_spin_unlock(&pcs->lock);
+	}
+}
+
+/**
+ * pcs_irq_mask() - mask pinctrl interrupt
+ * @d: interrupt data
+ */
+static void pcs_irq_mask(struct irq_data *d)
+{
+	struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d);
+
+	pcs_irq_set(pcs_soc, d->irq, false);
+}
+
+/**
+ * pcs_irq_unmask() - unmask pinctrl interrupt
+ * @d: interrupt data
+ */
+static void pcs_irq_unmask(struct irq_data *d)
+{
+	struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d);
+
+	pcs_irq_set(pcs_soc, d->irq, true);
+	if (pcs_soc->rearm)
+		pcs_soc->rearm();
+}
+
+/**
+ * pcs_irq_set_wake() - toggle the suspend and resume wake up
+ * @d: interrupt data
+ * @state: wake-up state
+ *
+ * Note that this should be called only for suspend and resume.
+ * For runtime PM, the wake-up events should be enabled by default.
+ */
+static int pcs_irq_set_wake(struct irq_data *d, unsigned int state)
+{
+	if (state)
+		pcs_irq_unmask(d);
+	else
+		pcs_irq_mask(d);
+
+	return 0;
+}
+
+/**
+ * pcs_irq_handle() - common interrupt handler
+ * @pcs_irq: interrupt data
+ *
+ * Note that this currently assumes we have one interrupt bit per
+ * mux register. This interrupt is typically used for wake-up events.
+ * For more complex interrupts different handlers can be specified.
+ */
+static int pcs_irq_handle(struct pcs_soc_data *pcs_soc)
+{
+	struct pcs_device *pcs;
+	struct list_head *pos;
+	int count = 0;
+
+	pcs = container_of(pcs_soc, struct pcs_device, socdata);
+	list_for_each(pos, &pcs->irqs) {
+		struct pcs_interrupt *pcswi;
+		unsigned mask;
+
+		pcswi = list_entry(pos, struct pcs_interrupt, node);
+		raw_spin_lock(&pcs->lock);
+		mask = pcs->read(pcswi->reg);
+		raw_spin_unlock(&pcs->lock);
+		if (mask & pcs_soc->irq_status_mask) {
+			generic_handle_irq(irq_find_mapping(pcs->domain,
+							    pcswi->hwirq));
+			count++;
+		}
+	}
+
+	/*
+	 * For debugging on omaps, you may want to call pcs_soc->rearm()
+	 * here to see wake-up interrupts during runtime also.
+	 */
+
+	return count;
+}
+
+/**
+ * pcs_irq_handler() - handler for the shared interrupt case
+ * @irq: interrupt
+ * @d: data
+ *
+ * Use this for cases where multiple instances of
+ * pinctrl-single share a single interrupt like on omaps.
+ */
+static irqreturn_t pcs_irq_handler(int irq, void *d)
+{
+	struct pcs_soc_data *pcs_soc = d;
+
+	return pcs_irq_handle(pcs_soc) ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/**
+ * pcs_irq_handle() - handler for the dedicated chained interrupt case
+ * @irq: interrupt
+ * @desc: interrupt descriptor
+ *
+ * Use this if you have a separate interrupt for each
+ * pinctrl-single instance.
+ */
+static void pcs_irq_chain_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pcs_soc_data *pcs_soc = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip;
+	int res;
+
+	chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+	res = pcs_irq_handle(pcs_soc);
+	/* REVISIT: export and add handle_bad_irq(irq, desc)? */
+	chained_irq_exit(chip, desc);
+
+	return;
+}
+
+static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq,
+			     irq_hw_number_t hwirq)
+{
+	struct pcs_soc_data *pcs_soc = d->host_data;
+	struct pcs_device *pcs;
+	struct pcs_interrupt *pcswi;
+
+	pcs = container_of(pcs_soc, struct pcs_device, socdata);
+	pcswi = devm_kzalloc(pcs->dev, sizeof(*pcswi), GFP_KERNEL);
+	if (!pcswi)
+		return -ENOMEM;
+
+	pcswi->reg = pcs->base + hwirq;
+	pcswi->hwirq = hwirq;
+	pcswi->irq = irq;
+
+	mutex_lock(&pcs->mutex);
+	list_add_tail(&pcswi->node, &pcs->irqs);
+	mutex_unlock(&pcs->mutex);
+
+	irq_set_chip_data(irq, pcs_soc);
+	irq_set_chip_and_handler(irq, &pcs->chip,
+				 handle_level_irq);
+
+#ifdef CONFIG_ARM
+	set_irq_flags(irq, IRQF_VALID);
+#else
+	irq_set_noprobe(irq);
+#endif
+
+	return 0;
+}
+
+static struct irq_domain_ops pcs_irqdomain_ops = {
+	.map = pcs_irqdomain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+/**
+ * pcs_irq_init_chained_handler() - set up a chained interrupt handler
+ * @pcs: pcs driver instance
+ * @np: device node pointer
+ */
+static int pcs_irq_init_chained_handler(struct pcs_device *pcs,
+					struct device_node *np)
+{
+	struct pcs_soc_data *pcs_soc = &pcs->socdata;
+	const char *name = "pinctrl";
+	int num_irqs;
+
+	if (!pcs_soc->irq_enable_mask ||
+	    !pcs_soc->irq_status_mask) {
+		pcs_soc->irq = -1;
+		return -EINVAL;
+	}
+
+	INIT_LIST_HEAD(&pcs->irqs);
+	pcs->chip.name = name;
+	pcs->chip.irq_ack = pcs_irq_mask;
+	pcs->chip.irq_mask = pcs_irq_mask;
+	pcs->chip.irq_unmask = pcs_irq_unmask;
+	pcs->chip.irq_set_wake = pcs_irq_set_wake;
+
+	if (PCS_QUIRK_HAS_SHARED_IRQ) {
+		int res;
+
+		res = request_irq(pcs_soc->irq, pcs_irq_handler,
+				  IRQF_SHARED | IRQF_NO_SUSPEND,
+				  name, pcs_soc);
+		if (res) {
+			pcs_soc->irq = -1;
+			return res;
+		}
+	} else {
+		irq_set_handler_data(pcs_soc->irq, pcs_soc);
+		irq_set_chained_handler(pcs_soc->irq,
+					pcs_irq_chain_handler);
+	}
+
+	/*
+	 * We can use the register offset as the hardirq
+	 * number as irq_domain_add_simple maps them lazily.
+	 * This way we can easily support more than one
+	 * interrupt per function if needed.
+	 */
+	num_irqs = pcs->size;
+
+	pcs->domain = irq_domain_add_simple(np, num_irqs, 0,
+					    &pcs_irqdomain_ops,
+					    pcs_soc);
+	if (!pcs->domain) {
+		irq_set_chained_handler(pcs_soc->irq, NULL);
+		return -EINVAL;
+	}
+
+	return 0;
+}
 
 #ifdef CONFIG_PM
 static int pinctrl_single_suspend(struct platform_device *pdev,
@@ -1523,8 +1851,10 @@
 {
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
+	struct pcs_pdata *pdata;
 	struct resource *res;
 	struct pcs_device *pcs;
+	const struct pcs_soc_data *soc;
 	int ret;
 
 	match = of_match_device(pcs_of_match, &pdev->dev);
@@ -1537,11 +1867,14 @@
 		return -ENOMEM;
 	}
 	pcs->dev = &pdev->dev;
+	raw_spin_lock_init(&pcs->lock);
 	mutex_init(&pcs->mutex);
 	INIT_LIST_HEAD(&pcs->pingroups);
 	INIT_LIST_HEAD(&pcs->functions);
 	INIT_LIST_HEAD(&pcs->gpiofuncs);
-	pcs->is_pinconf = match->data;
+	soc = match->data;
+	pcs->flags = soc->flags;
+	memcpy(&pcs->socdata, soc, sizeof(*soc));
 
 	PCS_GET_PROP_U32("pinctrl-single,register-width", &pcs->width,
 			 "register width not specified\n");
@@ -1610,7 +1943,7 @@
 	pcs->desc.name = DRIVER_NAME;
 	pcs->desc.pctlops = &pcs_pinctrl_ops;
 	pcs->desc.pmxops = &pcs_pinmux_ops;
-	if (pcs->is_pinconf)
+	if (PCS_HAS_PINCONF)
 		pcs->desc.confops = &pcs_pinconf_ops;
 	pcs->desc.owner = THIS_MODULE;
 
@@ -1629,6 +1962,27 @@
 	if (ret < 0)
 		goto free;
 
+	pcs->socdata.irq = irq_of_parse_and_map(np, 0);
+	if (pcs->socdata.irq)
+		pcs->flags |= PCS_FEAT_IRQ;
+
+	/* We still need auxdata for some omaps for PRM interrupts */
+	pdata = dev_get_platdata(&pdev->dev);
+	if (pdata) {
+		if (pdata->rearm)
+			pcs->socdata.rearm = pdata->rearm;
+		if (pdata->irq) {
+			pcs->socdata.irq = pdata->irq;
+			pcs->flags |= PCS_FEAT_IRQ;
+		}
+	}
+
+	if (PCS_HAS_IRQ) {
+		ret = pcs_irq_init_chained_handler(pcs, np);
+		if (ret < 0)
+			dev_warn(pcs->dev, "initialized with no interrupts\n");
+	}
+
 	dev_info(pcs->dev, "%i pins at pa %p size %u\n",
 		 pcs->desc.npins, pcs->base, pcs->size);
 
@@ -1652,9 +2006,25 @@
 	return 0;
 }
 
+static const struct pcs_soc_data pinctrl_single_omap_wkup = {
+	.flags = PCS_QUIRK_SHARED_IRQ,
+	.irq_enable_mask = (1 << 14),	/* OMAP_WAKEUP_EN */
+	.irq_status_mask = (1 << 15),	/* OMAP_WAKEUP_EVENT */
+};
+
+static const struct pcs_soc_data pinctrl_single = {
+};
+
+static const struct pcs_soc_data pinconf_single = {
+	.flags = PCS_FEAT_PINCONF,
+};
+
 static struct of_device_id pcs_of_match[] = {
-	{ .compatible = "pinctrl-single", .data = (void *)false },
-	{ .compatible = "pinconf-single", .data = (void *)true },
+	{ .compatible = "ti,omap3-padconf", .data = &pinctrl_single_omap_wkup },
+	{ .compatible = "ti,omap4-padconf", .data = &pinctrl_single_omap_wkup },
+	{ .compatible = "ti,omap5-padconf", .data = &pinctrl_single_omap_wkup },
+	{ .compatible = "pinctrl-single", .data = &pinctrl_single },
+	{ .compatible = "pinconf-single", .data = &pinconf_single },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, pcs_of_match);
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index ffd53e3..c8873b0 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -4,7 +4,7 @@
  */
 
 extern spinlock_t pnp_lock;
-extern struct device_attribute pnp_interface_attrs[];
+extern const struct attribute_group *pnp_dev_groups[];
 void *pnp_alloc(long size);
 
 int pnp_register_protocol(struct pnp_protocol *protocol);
diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c
index a39ee38..6936e0a 100644
--- a/drivers/pnp/driver.c
+++ b/drivers/pnp/driver.c
@@ -246,7 +246,7 @@
 	.remove  = pnp_device_remove,
 	.shutdown = pnp_device_shutdown,
 	.pm	 = &pnp_bus_dev_pm_ops,
-	.dev_attrs = pnp_interface_attrs,
+	.dev_groups = pnp_dev_groups,
 };
 
 int pnp_register_driver(struct pnp_driver *drv)
diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c
index 0c20131..e6c403b 100644
--- a/drivers/pnp/interface.c
+++ b/drivers/pnp/interface.c
@@ -203,8 +203,8 @@
 	}
 }
 
-static ssize_t pnp_show_options(struct device *dmdev,
-				struct device_attribute *attr, char *buf)
+static ssize_t options_show(struct device *dmdev, struct device_attribute *attr,
+			    char *buf)
 {
 	struct pnp_dev *dev = to_pnp_dev(dmdev);
 	pnp_info_buffer_t *buffer;
@@ -241,10 +241,10 @@
 	kfree(buffer);
 	return ret;
 }
+static DEVICE_ATTR_RO(options);
 
-static ssize_t pnp_show_current_resources(struct device *dmdev,
-					  struct device_attribute *attr,
-					  char *buf)
+static ssize_t resources_show(struct device *dmdev,
+			      struct device_attribute *attr, char *buf)
 {
 	struct pnp_dev *dev = to_pnp_dev(dmdev);
 	pnp_info_buffer_t *buffer;
@@ -331,9 +331,9 @@
 	return buf;
 }
 
-static ssize_t pnp_set_current_resources(struct device *dmdev,
-					 struct device_attribute *attr,
-					 const char *ubuf, size_t count)
+static ssize_t resources_store(struct device *dmdev,
+			       struct device_attribute *attr, const char *ubuf,
+			       size_t count)
 {
 	struct pnp_dev *dev = to_pnp_dev(dmdev);
 	char *buf = (void *)ubuf;
@@ -434,9 +434,10 @@
 		return retval;
 	return count;
 }
+static DEVICE_ATTR_RW(resources);
 
-static ssize_t pnp_show_current_ids(struct device *dmdev,
-				    struct device_attribute *attr, char *buf)
+static ssize_t id_show(struct device *dmdev, struct device_attribute *attr,
+		       char *buf)
 {
 	char *str = buf;
 	struct pnp_dev *dev = to_pnp_dev(dmdev);
@@ -448,12 +449,20 @@
 	}
 	return (str - buf);
 }
+static DEVICE_ATTR_RO(id);
 
-struct device_attribute pnp_interface_attrs[] = {
-	__ATTR(resources, S_IRUGO | S_IWUSR,
-		   pnp_show_current_resources,
-		   pnp_set_current_resources),
-	__ATTR(options, S_IRUGO, pnp_show_options, NULL),
-	__ATTR(id, S_IRUGO, pnp_show_current_ids, NULL),
-	__ATTR_NULL,
+static struct attribute *pnp_dev_attrs[] = {
+	&dev_attr_resources.attr,
+	&dev_attr_options.attr,
+	&dev_attr_id.attr,
+	NULL,
+};
+
+static const struct attribute_group pnp_dev_group = {
+	.attrs = pnp_dev_attrs,
+};
+
+const struct attribute_group *pnp_dev_groups[] = {
+	&pnp_dev_group,
+	NULL,
 };
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 3e9b6a7..c9ae692 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -223,8 +223,8 @@
 struct bus_type rio_bus_type = {
 	.name = "rapidio",
 	.match = rio_match_bus,
-	.dev_attrs = rio_dev_attrs,
-	.bus_attrs = rio_bus_attrs,
+	.dev_groups = rio_dev_groups,
+	.bus_groups = rio_bus_groups,
 	.probe = rio_device_probe,
 	.remove = rio_device_remove,
 	.uevent	= rio_uevent,
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 9331be6..e0221c6 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -27,6 +27,7 @@
 									\
 	return sprintf(buf, format_string, rdev->field);		\
 }									\
+static DEVICE_ATTR_RO(field);
 
 rio_config_attr(did, "0x%04x\n");
 rio_config_attr(vid, "0x%04x\n");
@@ -54,6 +55,7 @@
 
 	return (str - buf);
 }
+static DEVICE_ATTR_RO(routes);
 
 static ssize_t lprev_show(struct device *dev,
 			  struct device_attribute *attr, char *buf)
@@ -63,6 +65,7 @@
 	return sprintf(buf, "%s\n",
 			(rdev->prev) ? rio_name(rdev->prev) : "root");
 }
+static DEVICE_ATTR_RO(lprev);
 
 static ssize_t lnext_show(struct device *dev,
 			  struct device_attribute *attr, char *buf)
@@ -83,6 +86,7 @@
 
 	return str - buf;
 }
+static DEVICE_ATTR_RO(lnext);
 
 static ssize_t modalias_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
@@ -92,23 +96,29 @@
 	return sprintf(buf, "rapidio:v%04Xd%04Xav%04Xad%04X\n",
 		       rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did);
 }
+static DEVICE_ATTR_RO(modalias);
 
-struct device_attribute rio_dev_attrs[] = {
-	__ATTR_RO(did),
-	__ATTR_RO(vid),
-	__ATTR_RO(device_rev),
-	__ATTR_RO(asm_did),
-	__ATTR_RO(asm_vid),
-	__ATTR_RO(asm_rev),
-	__ATTR_RO(lprev),
-	__ATTR_RO(destid),
-	__ATTR_RO(modalias),
-	__ATTR_NULL,
+static struct attribute *rio_dev_attrs[] = {
+	&dev_attr_did.attr,
+	&dev_attr_vid.attr,
+	&dev_attr_device_rev.attr,
+	&dev_attr_asm_did.attr,
+	&dev_attr_asm_vid.attr,
+	&dev_attr_asm_rev.attr,
+	&dev_attr_lprev.attr,
+	&dev_attr_destid.attr,
+	&dev_attr_modalias.attr,
+	NULL,
 };
 
-static DEVICE_ATTR(routes, S_IRUGO, routes_show, NULL);
-static DEVICE_ATTR(lnext, S_IRUGO, lnext_show, NULL);
-static DEVICE_ATTR(hopcount, S_IRUGO, hopcount_show, NULL);
+static const struct attribute_group rio_dev_group = {
+	.attrs = rio_dev_attrs,
+};
+
+const struct attribute_group *rio_dev_groups[] = {
+	&rio_dev_group,
+	NULL,
+};
 
 static ssize_t
 rio_read_config(struct file *filp, struct kobject *kobj,
@@ -316,8 +326,18 @@
 
 	return rc;
 }
+static BUS_ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store);
 
-struct bus_attribute rio_bus_attrs[] = {
-	__ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store),
-	__ATTR_NULL
+static struct attribute *rio_bus_attrs[] = {
+	&bus_attr_scan.attr,
+	NULL,
+};
+
+static const struct attribute_group rio_bus_group = {
+	.attrs = rio_bus_attrs,
+};
+
+const struct attribute_group *rio_bus_groups[] = {
+	&rio_bus_group,
+	NULL,
 };
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 085215c..5f99d22 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -48,8 +48,8 @@
 extern int rio_mport_scan(int mport_id);
 
 /* Structures internal to the RIO core code */
-extern struct device_attribute rio_dev_attrs[];
-extern struct bus_attribute rio_bus_attrs[];
+extern const struct attribute_group *rio_dev_groups[];
+extern const struct attribute_group *rio_bus_groups[];
 
 #define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
 #define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rtc/rtc-hid-sensor-time.c b/drivers/rtc/rtc-hid-sensor-time.c
index 4e2a818..45560ff 100644
--- a/drivers/rtc/rtc-hid-sensor-time.c
+++ b/drivers/rtc/rtc-hid-sensor-time.c
@@ -275,6 +275,12 @@
 		return ret;
 	}
 
+	ret = sensor_hub_device_open(hsdev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to open sensor hub device!\n");
+		goto err_open;
+	}
+
 	time_state->rtc = devm_rtc_device_register(&pdev->dev,
 					"hid-sensor-time", &hid_time_rtc_ops,
 					THIS_MODULE);
@@ -282,17 +288,24 @@
 	if (IS_ERR_OR_NULL(time_state->rtc)) {
 		ret = time_state->rtc ? PTR_ERR(time_state->rtc) : -ENODEV;
 		time_state->rtc = NULL;
-		sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
 		dev_err(&pdev->dev, "rtc device register failed!\n");
+		goto err_rtc;
 	}
 
 	return ret;
+
+err_rtc:
+	sensor_hub_device_close(hsdev);
+err_open:
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
+	return ret;
 }
 
 static int hid_time_remove(struct platform_device *pdev)
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 
+	sensor_hub_device_close(hsdev);
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
 
 	return 0;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 451bf99..244f77f 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -698,10 +698,11 @@
 	}
 
 	spin_lock(&block->profile.lock);
-	if (block->profile.data)
+	if (block->profile.data) {
 		block->profile.data->dasd_io_nr_req[counter]++;
 		if (rq_data_dir(req) == READ)
 			block->profile.data->dasd_read_nr_req[counter]++;
+	}
 	spin_unlock(&block->profile.lock);
 
 	/*
diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c
index 5d73e6e..548209a 100644
--- a/drivers/s390/block/scm_blk.c
+++ b/drivers/s390/block/scm_blk.c
@@ -223,8 +223,12 @@
 	int ret;
 
 	while ((req = blk_peek_request(rq))) {
-		if (req->cmd_type != REQ_TYPE_FS)
+		if (req->cmd_type != REQ_TYPE_FS) {
+			blk_start_request(req);
+			blk_dump_rq_flags(req, KMSG_COMPONENT " bad request");
+			blk_end_request_all(req, -EIO);
 			continue;
+		}
 
 		if (!scm_permit_request(bdev, req)) {
 			scm_ensure_queue_restart(bdev);
diff --git a/drivers/s390/block/scm_blk.h b/drivers/s390/block/scm_blk.h
index 8b387b3..e59331e 100644
--- a/drivers/s390/block/scm_blk.h
+++ b/drivers/s390/block/scm_blk.h
@@ -107,7 +107,7 @@
 
 static inline void SCM_LOG_HEX(int level, void *data, int length)
 {
-	if (level > scm_debug->level)
+	if (!debug_level_enabled(scm_debug, level))
 		return;
 	while (length > 0) {
 		debug_event(scm_debug, level, data, length);
diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c
index 4600aa1..668b32b 100644
--- a/drivers/s390/char/monwriter.c
+++ b/drivers/s390/char/monwriter.c
@@ -60,7 +60,7 @@
 	struct appldata_product_id id;
 	int rc;
 
-	strcpy(id.prod_nr, "LNXAPPL");
+	strncpy(id.prod_nr, "LNXAPPL", 7);
 	id.prod_fn = myhdr->applid;
 	id.record_nr = myhdr->record_num;
 	id.version_nr = myhdr->version;
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 24a08e8..2cdec21 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -615,10 +615,10 @@
 
 	if (rp->state != RAW3270_STATE_RESET)
 		return;
-	if (rq && rq->rc) {
+	if (rq->rc) {
 		/* Reset command failed. */
 		rp->state = RAW3270_STATE_INIT;
-	} else if (0 && MACHINE_IS_VM) {
+	} else if (MACHINE_IS_VM) {
 		raw3270_size_device_vm(rp);
 		raw3270_size_device_done(rp);
 	} else
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 794820a..ffb1fcf 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -151,7 +151,7 @@
 
 	/* get info for boot cpu from lowcore, stored in the HSA */
 
-	sa = kmalloc(sizeof(*sa), GFP_KERNEL);
+	sa = dump_save_area_create(0);
 	if (!sa)
 		return -ENOMEM;
 	if (memcpy_hsa_kernel(sa, sys_info.sa_base, sys_info.sa_size) < 0) {
@@ -159,7 +159,6 @@
 		kfree(sa);
 		return -EIO;
 	}
-	zfcpdump_save_areas[0] = sa;
 	return 0;
 }
 
@@ -246,24 +245,25 @@
 static int zcore_add_lc(char __user *buf, unsigned long start, size_t count)
 {
 	unsigned long end;
-	int i = 0;
+	int i;
 
 	if (count == 0)
 		return 0;
 
 	end = start + count;
-	while (zfcpdump_save_areas[i]) {
+	for (i = 0; i < dump_save_areas.count; i++) {
 		unsigned long cp_start, cp_end; /* copy range */
 		unsigned long sa_start, sa_end; /* save area range */
 		unsigned long prefix;
 		unsigned long sa_off, len, buf_off;
+		struct save_area *save_area = dump_save_areas.areas[i];
 
-		prefix = zfcpdump_save_areas[i]->pref_reg;
+		prefix = save_area->pref_reg;
 		sa_start = prefix + sys_info.sa_base;
 		sa_end = prefix + sys_info.sa_base + sys_info.sa_size;
 
 		if ((end < sa_start) || (start > sa_end))
-			goto next;
+			continue;
 		cp_start = max(start, sa_start);
 		cp_end = min(end, sa_end);
 
@@ -272,10 +272,8 @@
 		len = cp_end - cp_start;
 
 		TRACE("copy_lc for: %lx\n", start);
-		if (copy_lc(buf + buf_off, zfcpdump_save_areas[i], sa_off, len))
+		if (copy_lc(buf + buf_off, save_area, sa_off, len))
 			return -EFAULT;
-next:
-		i++;
 	}
 	return 0;
 }
@@ -637,8 +635,8 @@
 	hdr->num_pages = mem_size / PAGE_SIZE;
 	hdr->tod = get_tod_clock();
 	get_cpu_id(&hdr->cpu_id);
-	for (i = 0; zfcpdump_save_areas[i]; i++) {
-		prefix = zfcpdump_save_areas[i]->pref_reg;
+	for (i = 0; i < dump_save_areas.count; i++) {
+		prefix = dump_save_areas.areas[i]->pref_reg;
 		hdr->real_cpu_cnt++;
 		if (!prefix)
 			continue;
diff --git a/drivers/s390/cio/airq.c b/drivers/s390/cio/airq.c
index d028fd8..f055df0 100644
--- a/drivers/s390/cio/airq.c
+++ b/drivers/s390/cio/airq.c
@@ -194,15 +194,14 @@
  */
 unsigned long airq_iv_alloc_bit(struct airq_iv *iv)
 {
-	const unsigned long be_to_le = BITS_PER_LONG - 1;
 	unsigned long bit;
 
 	if (!iv->avail)
 		return -1UL;
 	spin_lock(&iv->lock);
-	bit = find_first_bit_left(iv->avail, iv->bits);
+	bit = find_first_bit_inv(iv->avail, iv->bits);
 	if (bit < iv->bits) {
-		clear_bit(bit ^ be_to_le, iv->avail);
+		clear_bit_inv(bit, iv->avail);
 		if (bit >= iv->end)
 			iv->end = bit + 1;
 	} else
@@ -220,19 +219,17 @@
  */
 void airq_iv_free_bit(struct airq_iv *iv, unsigned long bit)
 {
-	const unsigned long be_to_le = BITS_PER_LONG - 1;
-
 	if (!iv->avail)
 		return;
 	spin_lock(&iv->lock);
 	/* Clear (possibly left over) interrupt bit */
-	clear_bit(bit ^ be_to_le, iv->vector);
+	clear_bit_inv(bit, iv->vector);
 	/* Make the bit position available again */
-	set_bit(bit ^ be_to_le, iv->avail);
+	set_bit_inv(bit, iv->avail);
 	if (bit == iv->end - 1) {
 		/* Find new end of bit-field */
 		while (--iv->end > 0)
-			if (!test_bit((iv->end - 1) ^ be_to_le, iv->avail))
+			if (!test_bit_inv(iv->end - 1, iv->avail))
 				break;
 	}
 	spin_unlock(&iv->lock);
@@ -251,15 +248,13 @@
 unsigned long airq_iv_scan(struct airq_iv *iv, unsigned long start,
 			   unsigned long end)
 {
-	const unsigned long be_to_le = BITS_PER_LONG - 1;
 	unsigned long bit;
 
 	/* Find non-zero bit starting from 'ivs->next'. */
-	bit = find_next_bit_left(iv->vector, end, start);
+	bit = find_next_bit_inv(iv->vector, end, start);
 	if (bit >= end)
 		return -1UL;
-	/* Clear interrupt bit (find left uses big-endian bit numbers) */
-	clear_bit(bit ^ be_to_le, iv->vector);
+	clear_bit_inv(bit, iv->vector);
 	return bit;
 }
 EXPORT_SYMBOL(airq_iv_scan);
diff --git a/drivers/s390/cio/eadm_sch.c b/drivers/s390/cio/eadm_sch.c
index d9eddcb..aca7bfc 100644
--- a/drivers/s390/cio/eadm_sch.c
+++ b/drivers/s390/cio/eadm_sch.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/kernel_stat.h>
+#include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
@@ -42,7 +43,7 @@
 
 static void EADM_LOG_HEX(int level, void *data, int length)
 {
-	if (level > eadm_debug->level)
+	if (!debug_level_enabled(eadm_debug, level))
 		return;
 	while (length > 0) {
 		debug_event(eadm_debug, level, data, length);
@@ -159,6 +160,9 @@
 	}
 	scm_irq_handler((struct aob *)(unsigned long)scsw->aob, error);
 	private->state = EADM_IDLE;
+
+	if (private->completion)
+		complete(private->completion);
 }
 
 static struct subchannel *eadm_get_idle_sch(void)
@@ -255,13 +259,32 @@
 
 static void eadm_quiesce(struct subchannel *sch)
 {
+	struct eadm_private *private = get_eadm_private(sch);
+	DECLARE_COMPLETION_ONSTACK(completion);
 	int ret;
 
+	spin_lock_irq(sch->lock);
+	if (private->state != EADM_BUSY)
+		goto disable;
+
+	if (eadm_subchannel_clear(sch))
+		goto disable;
+
+	private->completion = &completion;
+	spin_unlock_irq(sch->lock);
+
+	wait_for_completion_io(&completion);
+
+	spin_lock_irq(sch->lock);
+	private->completion = NULL;
+
+disable:
+	eadm_subchannel_set_timeout(sch, 0);
 	do {
-		spin_lock_irq(sch->lock);
 		ret = cio_disable_subchannel(sch);
-		spin_unlock_irq(sch->lock);
 	} while (ret == -EBUSY);
+
+	spin_unlock_irq(sch->lock);
 }
 
 static int eadm_subchannel_remove(struct subchannel *sch)
diff --git a/drivers/s390/cio/eadm_sch.h b/drivers/s390/cio/eadm_sch.h
index 2779be0..9664e46 100644
--- a/drivers/s390/cio/eadm_sch.h
+++ b/drivers/s390/cio/eadm_sch.h
@@ -1,6 +1,7 @@
 #ifndef EADM_SCH_H
 #define EADM_SCH_H
 
+#include <linux/completion.h>
 #include <linux/device.h>
 #include <linux/timer.h>
 #include <linux/list.h>
@@ -9,9 +10,10 @@
 struct eadm_private {
 	union orb orb;
 	enum {EADM_IDLE, EADM_BUSY, EADM_NOT_OPER} state;
+	struct completion *completion;
+	struct subchannel *sch;
 	struct timer_list timer;
 	struct list_head head;
-	struct subchannel *sch;
 } __aligned(8);
 
 #define get_eadm_private(n) ((struct eadm_private *)dev_get_drvdata(&n->dev))
diff --git a/drivers/s390/cio/qdio_debug.h b/drivers/s390/cio/qdio_debug.h
index 647b422..dfac9bf 100644
--- a/drivers/s390/cio/qdio_debug.h
+++ b/drivers/s390/cio/qdio_debug.h
@@ -16,12 +16,6 @@
 extern debug_info_t *qdio_dbf_setup;
 extern debug_info_t *qdio_dbf_error;
 
-/* sort out low debug levels early to avoid wasted sprints */
-static inline int qdio_dbf_passes(debug_info_t *dbf_grp, int level)
-{
-	return (level <= dbf_grp->level);
-}
-
 #define DBF_ERR		3	/* error conditions	*/
 #define DBF_WARN	4	/* warning conditions	*/
 #define DBF_INFO	6	/* informational	*/
@@ -65,7 +59,7 @@
 #define DBF_DEV_EVENT(level, device, text...) \
 	do { \
 		char debug_buffer[QDIO_DBF_LEN]; \
-		if (qdio_dbf_passes(device->debug_area, level)) { \
+		if (debug_level_enabled(device->debug_area, level)) { \
 			snprintf(debug_buffer, QDIO_DBF_LEN, text); \
 			debug_text_event(device->debug_area, level, debug_buffer); \
 		} \
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index bbd3e51..3e602e8 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -528,7 +528,7 @@
 	case SLSB_P_INPUT_PRIMED:
 		inbound_primed(q, count);
 		q->first_to_check = add_buf(q->first_to_check, count);
-		if (atomic_sub(count, &q->nr_buf_used) == 0)
+		if (atomic_sub_return(count, &q->nr_buf_used) == 0)
 			qperf_inc(q, inbound_queue_full);
 		if (q->irq_ptr->perf_stat_enabled)
 			account_sbals(q, count);
diff --git a/drivers/s390/crypto/zcrypt_debug.h b/drivers/s390/crypto/zcrypt_debug.h
index 841ea72..28d9349 100644
--- a/drivers/s390/crypto/zcrypt_debug.h
+++ b/drivers/s390/crypto/zcrypt_debug.h
@@ -11,12 +11,6 @@
 /* that gives us 15 characters in the text event views */
 #define ZCRYPT_DBF_LEN	16
 
-/* sort out low debug levels early to avoid wasted sprints */
-static inline int zcrypt_dbf_passes(debug_info_t *dbf_grp, int level)
-{
-	return (level <= dbf_grp->level);
-}
-
 #define DBF_ERR		3	/* error conditions	*/
 #define DBF_WARN	4	/* warning conditions	*/
 #define DBF_INFO	6	/* informational	*/
@@ -25,7 +19,7 @@
 
 #define ZCRYPT_DBF_COMMON(level, text...) \
 	do { \
-		if (zcrypt_dbf_passes(zcrypt_dbf_common, level)) { \
+		if (debug_level_enabled(zcrypt_dbf_common, level)) { \
 			char debug_buffer[ZCRYPT_DBF_LEN]; \
 			snprintf(debug_buffer, ZCRYPT_DBF_LEN, text); \
 			debug_text_event(zcrypt_dbf_common, level, \
@@ -35,7 +29,7 @@
 
 #define ZCRYPT_DBF_DEVICES(level, text...) \
 	do { \
-		if (zcrypt_dbf_passes(zcrypt_dbf_devices, level)) { \
+		if (debug_level_enabled(zcrypt_dbf_devices, level)) { \
 			char debug_buffer[ZCRYPT_DBF_LEN]; \
 			snprintf(debug_buffer, ZCRYPT_DBF_LEN, text); \
 			debug_text_event(zcrypt_dbf_devices, level, \
@@ -45,7 +39,7 @@
 
 #define ZCRYPT_DBF_DEV(level, device, text...) \
 	do { \
-		if (zcrypt_dbf_passes(device->dbf_area, level)) { \
+		if (debug_level_enabled(device->dbf_area, level)) { \
 			char debug_buffer[ZCRYPT_DBF_LEN]; \
 			snprintf(debug_buffer, ZCRYPT_DBF_LEN, text); \
 			debug_text_event(device->dbf_area, level, \
diff --git a/drivers/s390/net/claw.h b/drivers/s390/net/claw.h
index 1bc5904..3339b9b 100644
--- a/drivers/s390/net/claw.h
+++ b/drivers/s390/net/claw.h
@@ -114,15 +114,9 @@
 	debug_event(claw_dbf_##name,level,(void*)(addr),len); \
 } while (0)
 
-/* Allow to sort out low debug levels early to avoid wasted sprints */
-static inline int claw_dbf_passes(debug_info_t *dbf_grp, int level)
-{
-	return (level <= dbf_grp->level);
-}
-
 #define CLAW_DBF_TEXT_(level,name,text...) \
 	do { \
-		if (claw_dbf_passes(claw_dbf_##name, level)) { \
+		if (debug_level_enabled(claw_dbf_##name, level)) { \
 			sprintf(debug_buffer, text); \
 			debug_text_event(claw_dbf_##name, level, \
 						debug_buffer); \
diff --git a/drivers/s390/net/ctcm_dbug.c b/drivers/s390/net/ctcm_dbug.c
index 6514e1c..8363f1c9 100644
--- a/drivers/s390/net/ctcm_dbug.c
+++ b/drivers/s390/net/ctcm_dbug.c
@@ -66,7 +66,7 @@
 	char dbf_txt_buf[64];
 	va_list args;
 
-	if (level > (ctcm_dbf[dbf_nix].id)->level)
+	if (!debug_level_enabled(ctcm_dbf[dbf_nix].id, level))
 		return;
 	va_start(args, fmt);
 	vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args);
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index 8c03392..150fcb4 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -16,15 +16,9 @@
 	debug_event(lcs_dbf_##name,level,(void*)(addr),len); \
 } while (0)
 
-/* Allow to sort out low debug levels early to avoid wasted sprints */
-static inline int lcs_dbf_passes(debug_info_t *dbf_grp, int level)
-{
-	return (level <= dbf_grp->level);
-}
-
 #define LCS_DBF_TEXT_(level,name,text...) \
 	do { \
-		if (lcs_dbf_passes(lcs_dbf_##name, level)) { \
+		if (debug_level_enabled(lcs_dbf_##name, level)) { \
 			sprintf(debug_buffer, text); \
 			debug_text_event(lcs_dbf_##name, level, debug_buffer); \
 		} \
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 279ad50..9b333fc 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -105,15 +105,9 @@
 
 DECLARE_PER_CPU(char[256], iucv_dbf_txt_buf);
 
-/* Allow to sort out low debug levels early to avoid wasted sprints */
-static inline int iucv_dbf_passes(debug_info_t *dbf_grp, int level)
-{
-	return (level <= dbf_grp->level);
-}
-
 #define IUCV_DBF_TEXT_(name, level, text...) \
 	do { \
-		if (iucv_dbf_passes(iucv_dbf_##name, level)) { \
+		if (debug_level_enabled(iucv_dbf_##name, level)) { \
 			char* __buf = get_cpu_var(iucv_dbf_txt_buf); \
 			sprintf(__buf, text); \
 			debug_text_event(iucv_dbf_##name, level, __buf); \
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 0a328d0..d7b66a2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5096,7 +5096,7 @@
 	char dbf_txt_buf[32];
 	va_list args;
 
-	if (level > id->level)
+	if (!debug_level_enabled(id, level))
 		return;
 	va_start(args, fmt);
 	vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args);
diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h
index 3ac7a4b..0be3d48 100644
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -278,7 +278,7 @@
 static inline
 void zfcp_dbf_hba_fsf_resp(char *tag, int level, struct zfcp_fsf_req *req)
 {
-	if (level <= req->adapter->dbf->hba->level)
+	if (debug_level_enabled(req->adapter->dbf->hba, level))
 		zfcp_dbf_hba_fsf_res(tag, req);
 }
 
@@ -317,7 +317,7 @@
 	struct zfcp_adapter *adapter = (struct zfcp_adapter *)
 					scmd->device->host->hostdata[0];
 
-	if (level <= adapter->dbf->scsi->level)
+	if (debug_level_enabled(adapter->dbf->scsi, level))
 		zfcp_dbf_scsi(tag, scmd, req);
 }
 
diff --git a/drivers/scsi/fcoe/fcoe_sysfs.c b/drivers/scsi/fcoe/fcoe_sysfs.c
index c9382d6..1f4f22f 100644
--- a/drivers/scsi/fcoe/fcoe_sysfs.c
+++ b/drivers/scsi/fcoe/fcoe_sysfs.c
@@ -553,16 +553,20 @@
 	.release = fcoe_fcf_device_release,
 };
 
-static struct bus_attribute fcoe_bus_attr_group[] = {
-	__ATTR(ctlr_create, S_IWUSR, NULL, fcoe_ctlr_create_store),
-	__ATTR(ctlr_destroy, S_IWUSR, NULL, fcoe_ctlr_destroy_store),
-	__ATTR_NULL
+static BUS_ATTR(ctlr_create, S_IWUSR, NULL, fcoe_ctlr_create_store);
+static BUS_ATTR(ctlr_destroy, S_IWUSR, NULL, fcoe_ctlr_destroy_store);
+
+static struct attribute *fcoe_bus_attrs[] = {
+	&bus_attr_ctlr_create.attr,
+	&bus_attr_ctlr_destroy.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(fcoe_bus);
 
 static struct bus_type fcoe_bus_type = {
 	.name = "fcoe",
 	.match = &fcoe_bus_match,
-	.bus_attrs = fcoe_bus_attr_group,
+	.bus_groups = fcoe_bus_groups,
 };
 
 /**
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index e55ddf7..32a811d 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -374,7 +374,8 @@
 attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
 { \
 	return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
-}
+} \
+static DEVICE_ATTR_RO(attrib);
 
 ssb_config_attr(core_num, core_index, "%u\n")
 ssb_config_attr(coreid, id.coreid, "0x%04x\n")
@@ -387,16 +388,18 @@
 	return sprintf(buf, "%s\n",
 		       ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
 }
+static DEVICE_ATTR_RO(name);
 
-static struct device_attribute ssb_device_attrs[] = {
-	__ATTR_RO(name),
-	__ATTR_RO(core_num),
-	__ATTR_RO(coreid),
-	__ATTR_RO(vendor),
-	__ATTR_RO(revision),
-	__ATTR_RO(irq),
-	__ATTR_NULL,
+static struct attribute *ssb_device_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_core_num.attr,
+	&dev_attr_coreid.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_revision.attr,
+	&dev_attr_irq.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(ssb_device);
 
 static struct bus_type ssb_bustype = {
 	.name		= "ssb",
@@ -407,7 +410,7 @@
 	.suspend	= ssb_device_suspend,
 	.resume		= ssb_device_resume,
 	.uevent		= ssb_device_uevent,
-	.dev_attrs	= ssb_device_attrs,
+	.dev_groups	= ssb_device_groups,
 };
 
 static void ssb_buses_lock(void)
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 3626dbc8..3bfdaa8 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -136,6 +136,8 @@
 
 source "drivers/staging/netlogic/Kconfig"
 
+source "drivers/staging/mt29f_spinand/Kconfig"
+
 source "drivers/staging/dwc2/Kconfig"
 
 source "drivers/staging/lustre/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index d1b4b80..b0d3303 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -66,3 +66,4 @@
 obj-$(CONFIG_XILLYBUS)		+= xillybus/
 obj-$(CONFIG_DGNC)			+= dgnc/
 obj-$(CONFIG_DGAP)			+= dgap/
+obj-$(CONFIG_MTD_SPINAND_MT29F)	+= mt29f_spinand/
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index c0c95be..1e9ab6d 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -10,6 +10,7 @@
 
 config ANDROID_BINDER_IPC
 	bool "Android Binder IPC Driver"
+	depends on MMU
 	default n
 	---help---
 	  Binder is used in Android for both communication between processes,
@@ -76,7 +77,7 @@
 	bool "Synchronization framework"
 	default n
 	select ANON_INODES
-	help
+	---help---
 	  This option enables the framework for synchronization between multiple
 	  drivers.  Sync implementations can take advantage of hardware
 	  synchronization built into devices like GPUs.
@@ -85,7 +86,7 @@
 	bool "Software synchronization objects"
 	default n
 	depends on SYNC
-	help
+	---help---
 	  A sync object driver that uses a 32bit counter to coordinate
 	  syncrhronization.  Useful when there is no hardware primitive backing
 	  the synchronization.
@@ -94,7 +95,7 @@
 	bool "Userspace API for SW_SYNC"
 	default n
 	depends on SW_SYNC
-	help
+	---help---
 	  Provides a user space API to the sw sync object.
 	  *WARNING* improper use of this can result in deadlocking kernel
 	  drivers from userspace.
diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c
index 6dc27da..647694f 100644
--- a/drivers/staging/android/alarm-dev.c
+++ b/drivers/staging/android/alarm-dev.c
@@ -60,7 +60,12 @@
 
 static struct devalarm alarms[ANDROID_ALARM_TYPE_COUNT];
 
-
+/**
+ * is_wakeup() - Checks to see if this alarm can wake the device
+ * @type:	 The type of alarm being checked
+ *
+ * Return: 1 if this is a wakeup alarm, otherwise 0
+ */
 static int is_wakeup(enum android_alarm_type type)
 {
 	return (type == ANDROID_ALARM_RTC_WAKEUP ||
@@ -76,7 +81,6 @@
 		hrtimer_start(&alrm->u.hrt, exp, HRTIMER_MODE_ABS);
 }
 
-
 static int devalarm_try_to_cancel(struct devalarm *alrm)
 {
 	if (is_wakeup(alrm->type))
diff --git a/drivers/staging/android/ashmem.c b/drivers/staging/android/ashmem.c
index 8e76ddc..23948f1 100644
--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -37,41 +37,59 @@
 #define ASHMEM_NAME_PREFIX_LEN (sizeof(ASHMEM_NAME_PREFIX) - 1)
 #define ASHMEM_FULL_NAME_LEN (ASHMEM_NAME_LEN + ASHMEM_NAME_PREFIX_LEN)
 
-/*
- * ashmem_area - anonymous shared memory area
- * Lifecycle: From our parent file's open() until its release()
- * Locking: Protected by `ashmem_mutex'
- * Big Note: Mappings do NOT pin this structure; it dies on close()
+/**
+ * struct ashmem_area - The anonymous shared memory area
+ * @name:		The optional name in /proc/pid/maps
+ * @unpinned_list:	The list of all ashmem areas
+ * @file:		The shmem-based backing file
+ * @size:		The size of the mapping, in bytes
+ * @prot_masks:		The allowed protection bits, as vm_flags
+ *
+ * The lifecycle of this structure is from our parent file's open() until
+ * its release(). It is also protected by 'ashmem_mutex'
+ *
+ * Warning: Mappings do NOT pin this structure; It dies on close()
  */
 struct ashmem_area {
-	char name[ASHMEM_FULL_NAME_LEN]; /* optional name in /proc/pid/maps */
-	struct list_head unpinned_list;	 /* list of all ashmem areas */
-	struct file *file;		 /* the shmem-based backing file */
-	size_t size;			 /* size of the mapping, in bytes */
-	unsigned long prot_mask;	 /* allowed prot bits, as vm_flags */
+	char name[ASHMEM_FULL_NAME_LEN];
+	struct list_head unpinned_list;
+	struct file *file;
+	size_t size;
+	unsigned long prot_mask;
 };
 
-/*
- * ashmem_range - represents an interval of unpinned (evictable) pages
- * Lifecycle: From unpin to pin
- * Locking: Protected by `ashmem_mutex'
+/**
+ * struct ashmem_range - A range of unpinned/evictable pages
+ * @lru:	         The entry in the LRU list
+ * @unpinned:	         The entry in its area's unpinned list
+ * @asma:	         The associated anonymous shared memory area.
+ * @pgstart:	         The starting page (inclusive)
+ * @pgend:	         The ending page (inclusive)
+ * @purged:	         The purge status (ASHMEM_NOT or ASHMEM_WAS_PURGED)
+ *
+ * The lifecycle of this structure is from unpin to pin.
+ * It is protected by 'ashmem_mutex'
  */
 struct ashmem_range {
-	struct list_head lru;		/* entry in LRU list */
-	struct list_head unpinned;	/* entry in its area's unpinned list */
-	struct ashmem_area *asma;	/* associated area */
-	size_t pgstart;			/* starting page, inclusive */
-	size_t pgend;			/* ending page, inclusive */
-	unsigned int purged;		/* ASHMEM_NOT or ASHMEM_WAS_PURGED */
+	struct list_head lru;
+	struct list_head unpinned;
+	struct ashmem_area *asma;
+	size_t pgstart;
+	size_t pgend;
+	unsigned int purged;
 };
 
 /* LRU list of unpinned pages, protected by ashmem_mutex */
 static LIST_HEAD(ashmem_lru_list);
 
-/* Count of pages on our LRU list, protected by ashmem_mutex */
+/**
+ * long lru_count - The count of pages on our LRU list.
+ *
+ * This is protected by ashmem_mutex.
+ */
 static unsigned long lru_count;
 
-/*
+/**
  * ashmem_mutex - protects the list of and each individual ashmem_area
  *
  * Lock Ordering: ashmex_mutex -> i_mutex -> i_alloc_sem
@@ -105,28 +123,43 @@
 
 #define PROT_MASK		(PROT_EXEC | PROT_READ | PROT_WRITE)
 
+/**
+ * lru_add() - Adds a range of memory to the LRU list
+ * @range:     The memory range being added.
+ *
+ * The range is first added to the end (tail) of the LRU list.
+ * After this, the size of the range is added to @lru_count
+ */
 static inline void lru_add(struct ashmem_range *range)
 {
 	list_add_tail(&range->lru, &ashmem_lru_list);
 	lru_count += range_size(range);
 }
 
+/**
+ * lru_del() - Removes a range of memory from the LRU list
+ * @range:     The memory range being removed
+ *
+ * The range is first deleted from the LRU list.
+ * After this, the size of the range is removed from @lru_count
+ */
 static inline void lru_del(struct ashmem_range *range)
 {
 	list_del(&range->lru);
 	lru_count -= range_size(range);
 }
 
-/*
- * range_alloc - allocate and initialize a new ashmem_range structure
+/**
+ * range_alloc() - Allocates and initializes a new ashmem_range structure
+ * @asma:	   The associated ashmem_area
+ * @prev_range:	   The previous ashmem_range in the sorted asma->unpinned list
+ * @purged:	   Initial purge status (ASMEM_NOT_PURGED or ASHMEM_WAS_PURGED)
+ * @start:	   The starting page (inclusive)
+ * @end:	   The ending page (inclusive)
  *
- * 'asma' - associated ashmem_area
- * 'prev_range' - the previous ashmem_range in the sorted asma->unpinned list
- * 'purged' - initial purge value (ASMEM_NOT_PURGED or ASHMEM_WAS_PURGED)
- * 'start' - starting page, inclusive
- * 'end' - ending page, inclusive
+ * This function is protected by ashmem_mutex.
  *
- * Caller must hold ashmem_mutex.
+ * Return: 0 if successful, or -ENOMEM if there is an error
  */
 static int range_alloc(struct ashmem_area *asma,
 		       struct ashmem_range *prev_range, unsigned int purged,
@@ -151,6 +184,10 @@
 	return 0;
 }
 
+/**
+ * range_del() - Deletes and dealloctes an ashmem_range structure
+ * @range:	 The associated ashmem_range that has previously been allocated
+ */
 static void range_del(struct ashmem_range *range)
 {
 	list_del(&range->unpinned);
@@ -159,10 +196,17 @@
 	kmem_cache_free(ashmem_range_cachep, range);
 }
 
-/*
- * range_shrink - shrinks a range
+/**
+ * range_shrink() - Shrinks an ashmem_range
+ * @range:	    The associated ashmem_range being shrunk
+ * @start:	    The starting byte of the new range
+ * @end:	    The ending byte of the new range
  *
- * Caller must hold ashmem_mutex.
+ * This does not modify the data inside the existing range in any way - It
+ * simply shrinks the boundaries of the range.
+ *
+ * Theoretically, with a little tweaking, this could eventually be changed
+ * to range_resize, and expand the lru_count if the new range is larger.
  */
 static inline void range_shrink(struct ashmem_range *range,
 				size_t start, size_t end)
@@ -176,6 +220,16 @@
 		lru_count -= pre - range_size(range);
 }
 
+/**
+ * ashmem_open() - Opens an Anonymous Shared Memory structure
+ * @inode:	   The backing file's index node(?)
+ * @file:	   The backing file
+ *
+ * Please note that the ashmem_area is not returned by this function - It is
+ * instead written to "file->private_data".
+ *
+ * Return: 0 if successful, or another code if unsuccessful.
+ */
 static int ashmem_open(struct inode *inode, struct file *file)
 {
 	struct ashmem_area *asma;
@@ -197,6 +251,14 @@
 	return 0;
 }
 
+/**
+ * ashmem_release() - Releases an Anonymous Shared Memory structure
+ * @ignored:	      The backing file's Index Node(?) - It is ignored here.
+ * @file:	      The backing file
+ *
+ * Return: 0 if successful. If it is anything else, go have a coffee and
+ * try again.
+ */
 static int ashmem_release(struct inode *ignored, struct file *file)
 {
 	struct ashmem_area *asma = file->private_data;
@@ -214,6 +276,15 @@
 	return 0;
 }
 
+/**
+ * ashmem_read() - Reads a set of bytes from an Ashmem-enabled file
+ * @file:	   The associated backing file.
+ * @buf:	   The buffer of data being written to
+ * @len:	   The number of bytes being read
+ * @pos:	   The position of the first byte to read.
+ *
+ * Return: 0 if successful, or another return code if not.
+ */
 static ssize_t ashmem_read(struct file *file, char __user *buf,
 			   size_t len, loff_t *pos)
 {
@@ -706,7 +777,7 @@
 				.gfp_mask = GFP_KERNEL,
 				.nr_to_scan = LONG_MAX,
 			};
-
+			ret = ashmem_shrink_count(&ashmem_shrinker, &sc);
 			nodes_setall(sc.nodes_to_scan);
 			ashmem_shrink_scan(&ashmem_shrinker, &sc);
 		}
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 98ac020..eaec1da 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -1700,7 +1700,8 @@
 		thread->return_error = return_error;
 }
 
-int binder_thread_write(struct binder_proc *proc, struct binder_thread *thread,
+static int binder_thread_write(struct binder_proc *proc,
+			struct binder_thread *thread,
 			void __user *buffer, size_t size, size_t *consumed)
 {
 	uint32_t cmd;
@@ -1773,7 +1774,7 @@
 		case BC_INCREFS_DONE:
 		case BC_ACQUIRE_DONE: {
 			void __user *node_ptr;
-			void *cookie;
+			void __user *cookie;
 			struct binder_node *node;
 
 			if (get_user(node_ptr, (void * __user *)ptr))
@@ -2055,8 +2056,8 @@
 	return 0;
 }
 
-void binder_stat_br(struct binder_proc *proc, struct binder_thread *thread,
-		    uint32_t cmd)
+static void binder_stat_br(struct binder_proc *proc,
+			   struct binder_thread *thread, uint32_t cmd)
 {
 	trace_binder_return(cmd);
 	if (_IOC_NR(cmd) < ARRAY_SIZE(binder_stats.br)) {
diff --git a/drivers/staging/android/timed_output.h b/drivers/staging/android/timed_output.h
index ec907ab..905c7cc 100644
--- a/drivers/staging/android/timed_output.h
+++ b/drivers/staging/android/timed_output.h
@@ -31,7 +31,7 @@
 	int		state;
 };
 
-extern int timed_output_dev_register(struct timed_output_dev *dev);
-extern void timed_output_dev_unregister(struct timed_output_dev *dev);
+int timed_output_dev_register(struct timed_output_dev *dev);
+void timed_output_dev_unregister(struct timed_output_dev *dev);
 
 #endif
diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 1d8bf08..9cd5987 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -35,7 +35,7 @@
 #define MAX_PROTOCOL_LENGTH   32
 #define IPV6_ADDRESS_SIZEINBYTES 0x10
 
-typedef union _U_IP_ADDRESS {
+union u_ip_address {
 	struct {
 		ULONG ulIpv4Addr[MAX_IP_RANGE_LENGTH]; /* Source Ip Address Range */
 		ULONG ulIpv4Mask[MAX_IP_RANGE_LENGTH]; /* Source Ip Mask Address Range */
@@ -52,7 +52,7 @@
 		UCHAR ucIpv6Address[MAX_IP_RANGE_LENGTH * IPV6_ADDRESS_SIZEINBYTES];
 		UCHAR ucIpv6Mask[MAX_IP_RANGE_LENGTH * IPV6_ADDRESS_SIZEINBYTES];
 	};
-} U_IP_ADDRESS;
+};
 
 struct bcm_hdr_suppression_contextinfo {
 	UCHAR ucaHdrSuppressionInBuf[MAX_PHS_LENGTHS]; /* Intermediate buffer to accumulate pkt Header for PHS */
@@ -63,13 +63,13 @@
 	ULONG		ulSFID;
 	UCHAR		ucReserved[2];
 	B_UINT16	uiClassifierRuleIndex;
-	BOOLEAN		bUsed;
+	bool		bUsed;
 	USHORT		usVCID_Value;
 	B_UINT8		u8ClassifierRulePriority; /* This field detemines the Classifier Priority */
-	U_IP_ADDRESS	stSrcIpAddress;
+	union u_ip_address	stSrcIpAddress;
 	UCHAR		ucIPSourceAddressLength; /* Ip Source Address Length */
 
-	U_IP_ADDRESS	stDestIpAddress;
+	union u_ip_address	stDestIpAddress;
 	UCHAR		ucIPDestinationAddressLength; /* Ip Destination Address Length */
 	UCHAR		ucIPTypeOfServiceLength; /* Type of service Length */
 	UCHAR		ucTosLow; /* Tos Low */
@@ -86,14 +86,14 @@
 	USHORT		usDestPortRangeHi[MAX_PORT_RANGE];
 	UCHAR		ucDestPortRangeLength;
 
-	BOOLEAN		bProtocolValid;
-	BOOLEAN		bTOSValid;
-	BOOLEAN		bDestIpValid;
-	BOOLEAN		bSrcIpValid;
+	bool		bProtocolValid;
+	bool		bTOSValid;
+	bool		bDestIpValid;
+	bool		bSrcIpValid;
 
 	/* For IPv6 Addressing */
 	UCHAR		ucDirection;
-	BOOLEAN		bIpv6Protocol;
+	bool		bIpv6Protocol;
 	UINT32		u32PHSRuleID;
 	struct bcm_phs_rule sPhsRule;
 	UCHAR		u8AssociatedPHSI;
@@ -113,11 +113,11 @@
 };
 
 struct bcm_fragmented_packet_info {
-	BOOLEAN			bUsed;
+	bool			bUsed;
 	ULONG			ulSrcIpAddress;
 	USHORT			usIpIdentification;
 	struct bcm_classifier_rule *pstMatchedClassifierEntry;
-	BOOLEAN			bOutOfOrderFragment;
+	bool			bOutOfOrderFragment;
 };
 
 struct bcm_packet_info {
@@ -128,9 +128,9 @@
 	/* This field determines the priority of the SF Queues */
 	B_UINT8		u8TrafficPriority;
 
-	BOOLEAN		bValid;
-	BOOLEAN		bActive;
-	BOOLEAN		bActivateRequestSent;
+	bool		bValid;
+	bool		bActive;
+	bool		bActivateRequestSent;
 
 	B_UINT8		u8QueueType; /* BE or rtPS */
 
@@ -170,17 +170,17 @@
 		};
 	};
 
-	BOOLEAN		bProtocolValid;
-	BOOLEAN		bTOSValid;
-	BOOLEAN		bDestIpValid;
-	BOOLEAN		bSrcIpValid;
+	bool		bProtocolValid;
+	bool		bTOSValid;
+	bool		bDestIpValid;
+	bool		bSrcIpValid;
 
-	BOOLEAN		bActiveSet;
-	BOOLEAN		bAdmittedSet;
-	BOOLEAN		bAuthorizedSet;
-	BOOLEAN		bClassifierPriority;
+	bool		bActiveSet;
+	bool		bAdmittedSet;
+	bool		bAuthorizedSet;
+	bool		bClassifierPriority;
 	UCHAR		ucServiceClassName[MAX_CLASS_NAME_LENGTH];
-	BOOLEAN		bHeaderSuppressionEnabled;
+	bool		bHeaderSuppressionEnabled;
 	spinlock_t	SFQueueLock;
 	void		*pstSFIndication;
 	struct timeval	stLastUpdateTokenAt;
@@ -196,8 +196,8 @@
 	struct sk_buff		*RxAppControlHead;
 	struct sk_buff		*RxAppControlTail;
 	int			AppCtrlQueueLen;
-	BOOLEAN			MacTracingEnabled;
-	BOOLEAN			bApplicationToExit;
+	bool			MacTracingEnabled;
+	bool			bApplicationToExit;
 	struct bcm_mibs_dropped_cntrl_msg stDroppedAppCntrlMsgs;
 	ULONG			RxCntrlMsgBitMask;
 };
@@ -205,7 +205,7 @@
 struct bcm_targetdsx_buffer {
 	ULONG		ulTargetDsxBuffer;
 	B_UINT16	tid;
-	BOOLEAN		valid;
+	bool		valid;
 };
 
 typedef int (*FP_FLASH_WRITE)(struct bcm_mini_adapter *, UINT, PVOID);
@@ -221,11 +221,11 @@
 	u32			msg_enable;
 	CHAR			*caDsxReqResp;
 	atomic_t		ApplicationRunning;
-	BOOLEAN			AppCtrlQueueOverFlow;
+	bool			AppCtrlQueueOverFlow;
 	atomic_t		CurrentApplicationCount;
 	atomic_t		RegisteredApplicationCount;
-	BOOLEAN			LinkUpStatus;
-	BOOLEAN			TimerActive;
+	bool			LinkUpStatus;
+	bool			TimerActive;
 	u32			StatisticsPointer;
 	struct sk_buff		*RxControlHead;
 	struct sk_buff		*RxControlTail;
@@ -249,25 +249,25 @@
 	UINT			u32TotalDSD;
 	struct bcm_packet_info	PackInfo[NO_OF_QUEUES];
 	struct bcm_classifier_rule astClassifierTable[MAX_CLASSIFIERS];
-	BOOLEAN			TransferMode;
+	bool			TransferMode;
 
 	/*************** qos ******************/
-	BOOLEAN			bETHCSEnabled;
+	bool			bETHCSEnabled;
 	ULONG			BEBucketSize;
 	ULONG			rtPSBucketSize;
 	UCHAR			LinkStatus;
-	BOOLEAN			AutoLinkUp;
-	BOOLEAN			AutoSyncup;
+	bool			AutoLinkUp;
+	bool			AutoSyncup;
 
 	int			major;
 	int			minor;
 	wait_queue_head_t	tx_packet_wait_queue;
 	wait_queue_head_t	process_rx_cntrlpkt;
 	atomic_t		process_waiting;
-	BOOLEAN			fw_download_done;
+	bool			fw_download_done;
 
 	char			*txctlpacket[MAX_CNTRL_PKTS];
-	atomic_t		cntrlpktCnt ;
+	atomic_t		cntrlpktCnt;
 	atomic_t		index_app_read_cntrlpkt;
 	atomic_t		index_wr_txcntrlpkt;
 	atomic_t		index_rd_txcntrlpkt;
@@ -280,19 +280,19 @@
 	ULONG			ulTotalTargetBuffersAvailable;
 	unsigned long		chip_id;
 	wait_queue_head_t	lowpower_mode_wait_queue;
-	BOOLEAN			bFlashBoot;
-	BOOLEAN			bBinDownloaded;
-	BOOLEAN			bCfgDownloaded;
-	BOOLEAN			bSyncUpRequestSent;
+	bool			bFlashBoot;
+	bool			bBinDownloaded;
+	bool			bCfgDownloaded;
+	bool			bSyncUpRequestSent;
 	USHORT			usBestEffortQueueIndex;
 	wait_queue_head_t	ioctl_fw_dnld_wait_queue;
-	BOOLEAN			waiting_to_fw_download_done;
+	bool			waiting_to_fw_download_done;
 	pid_t			fw_download_process_pid;
 	struct bcm_target_params *pstargetparams;
-	BOOLEAN			device_removed;
-	BOOLEAN			DeviceAccess;
-	BOOLEAN			bIsAutoCorrectEnabled;
-	BOOLEAN			bDDRInitDone;
+	bool			device_removed;
+	bool			DeviceAccess;
+	bool			bIsAutoCorrectEnabled;
+	bool			bDDRInitDone;
 	int			DDRSetting;
 	ULONG			ulPowerSaveMode;
 	spinlock_t		txtransmitlock;
@@ -324,22 +324,22 @@
 			PVOID,
 			int);
 	int (*interface_transmit)(PVOID, PVOID , UINT);
-	BOOLEAN			IdleMode;
-	BOOLEAN			bDregRequestSentInIdleMode;
-	BOOLEAN			bTriedToWakeUpFromlowPowerMode;
-	BOOLEAN			bShutStatus;
-	BOOLEAN			bWakeUpDevice;
+	bool			IdleMode;
+	bool			bDregRequestSentInIdleMode;
+	bool			bTriedToWakeUpFromlowPowerMode;
+	bool			bShutStatus;
+	bool			bWakeUpDevice;
 	unsigned int		usIdleModePattern;
 	/* BOOLEAN			bTriedToWakeUpFromShutdown; */
-	BOOLEAN			bLinkDownRequested;
+	bool			bLinkDownRequested;
 	int			downloadDDR;
 	struct bcm_phs_extension stBCMPhsContext;
 	struct bcm_hdr_suppression_contextinfo stPhsTxContextInfo;
 	uint8_t			ucaPHSPktRestoreBuf[2048];
 	uint8_t			bPHSEnabled;
-	BOOLEAN			AutoFirmDld;
-	BOOLEAN			bMipsConfig;
-	BOOLEAN			bDPLLConfig;
+	bool			AutoFirmDld;
+	bool			bMipsConfig;
+	bool			bDPLLConfig;
 	UINT32			aTxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
 	UINT32			aRxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
 	struct bcm_fragmented_packet_info astFragmentedPktClassifierTable[MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES];
@@ -348,8 +348,8 @@
 	enum bcm_nvm_type	eNVMType;
 	UINT			uiSectorSize;
 	UINT			uiSectorSizeInCFG;
-	BOOLEAN			bSectorSizeOverride;
-	BOOLEAN			bStatusWrite;
+	bool			bSectorSizeOverride;
+	bool			bStatusWrite;
 	UINT			uiNVMDSDSize;
 	UINT			uiVendorExtnFlag;
 	/* it will always represent chosen DSD at any point of time.
@@ -376,18 +376,18 @@
 	UINT			uiActiveDSDOffsetAtFwDld;  /* For accessing Active DSD chosen before f/w download */
 	UINT			uiFlashLayoutMajorVersion;
 	UINT			uiFlashLayoutMinorVersion;
-	BOOLEAN			bAllDSDWriteAllow;
-	BOOLEAN			bSigCorrupted;
+	bool			bAllDSDWriteAllow;
+	bool			bSigCorrupted;
 	/* this should be set who so ever want to change the Headers. after Wrtie it should be reset immediately. */
-	BOOLEAN			bHeaderChangeAllowed;
+	bool			bHeaderChangeAllowed;
 	int			SelectedChip;
-	BOOLEAN			bEndPointHalted;
+	bool			bEndPointHalted;
 	/* while bFlashRawRead will be true, Driver  ignore map lay out and consider flash as of without any map. */
-	BOOLEAN			bFlashRawRead;
-	BOOLEAN			bPreparingForLowPowerMode;
-	BOOLEAN			bDoSuspend;
+	bool			bFlashRawRead;
+	bool			bPreparingForLowPowerMode;
+	bool			bDoSuspend;
 	UINT			syscfgBefFwDld;
-	BOOLEAN			StopAllXaction;
+	bool			StopAllXaction;
 	UINT32			liTimeSinceLastNetEntry; /* Used to Support extended CAPI requirements from */
 	struct semaphore	LowPowerModeSync;
 	ULONG			liDrainCalculated;
diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index 639ba96..87b74ca 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -49,11 +49,8 @@
 
 	pTarang = (struct bcm_tarang_data *)filp->private_data;
 
-	if (pTarang == NULL) {
-		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
-				"ptarang is null\n");
+	if (pTarang == NULL)
 		return 0;
-	}
 
 	Adapter = pTarang->Adapter;
 
@@ -119,7 +116,7 @@
 		return -ENODEV;
 	}
 
-	if (FALSE == Adapter->fw_download_done)
+	if (false == Adapter->fw_download_done)
 		return -EACCES;
 
 	down(&Adapter->RxAppControlQueuelock);
@@ -180,7 +177,7 @@
 	if (Adapter->device_removed)
 		return -EFAULT;
 
-	if (FALSE == Adapter->fw_download_done) {
+	if (false == Adapter->fw_download_done) {
 		switch (cmd) {
 		case IOCTL_MAC_ADDR_REQ:
 		case IOCTL_LINK_REQ:
@@ -425,7 +422,7 @@
 		uiOperation = gpio_info.uiGpioValue;
 		value = (1<<uiBit);
 
-		if (IsReqGpioIsLedInNVM(Adapter, value) == FALSE) {
+		if (IsReqGpioIsLedInNVM(Adapter, value) == false) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!", value);
 			Status = -EINVAL;
 			break;
@@ -572,7 +569,7 @@
 		if (copy_from_user(&gpio_multi_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
 			return -EFAULT;
 
-		if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == FALSE) {
+		if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == false) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
 					"Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
 					pgpio_multi_info[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
@@ -665,7 +662,7 @@
 		}
 
 		/* Validating the request */
-		if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) == FALSE) {
+		if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) == false) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
 					"Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
 					pgpio_multi_mode[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
@@ -768,10 +765,10 @@
 		if (down_trylock(&Adapter->fw_download_sema))
 			return -EBUSY;
 
-		Adapter->bBinDownloaded = FALSE;
+		Adapter->bBinDownloaded = false;
 		Adapter->fw_download_process_pid = current->pid;
-		Adapter->bCfgDownloaded = FALSE;
-		Adapter->fw_download_done = FALSE;
+		Adapter->bCfgDownloaded = false;
+		Adapter->fw_download_done = false;
 		netif_carrier_off(Adapter->dev);
 		netif_stop_queue(Adapter->dev);
 		Status = reset_card_proc(Adapter);
@@ -848,7 +845,7 @@
 
 			if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
 				Adapter->DriverState = DRIVER_INIT;
-				Adapter->LEDInfo.bLedInitDone = FALSE;
+				Adapter->LEDInfo.bLedInitDone = false;
 				wake_up(&Adapter->LEDInfo.notify_led_event);
 			}
 		}
@@ -900,7 +897,7 @@
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
 
 		timeout = 5*HZ;
-		Adapter->waiting_to_fw_download_done = FALSE;
+		Adapter->waiting_to_fw_download_done = false;
 		wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue,
 				Adapter->waiting_to_fw_download_done, timeout);
 		Adapter->fw_download_process_pid = INVALID_PID;
@@ -1052,7 +1049,7 @@
 		if (tracing_flag)
 			Adapter->pTarangs->MacTracingEnabled = TRUE;
 		else
-			Adapter->pTarangs->MacTracingEnabled = FALSE;
+			Adapter->pTarangs->MacTracingEnabled = false;
 		break;
 	}
 
@@ -1109,7 +1106,7 @@
 	}
 
 	case IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE:
-		if ((FALSE == Adapter->bTriedToWakeUpFromlowPowerMode) && (TRUE == Adapter->IdleMode)) {
+		if ((false == Adapter->bTriedToWakeUpFromlowPowerMode) && (TRUE == Adapter->IdleMode)) {
 			Adapter->usIdleModePattern = ABORT_IDLE_MODE;
 			Adapter->bWakeUpDevice = TRUE;
 			wake_up(&Adapter->process_rx_cntrlpkt);
@@ -1168,7 +1165,7 @@
 			break;
 		}
 
-		if (pBulkBuffer->SwapEndian == FALSE)
+		if (pBulkBuffer->SwapEndian == false)
 			Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register, (PCHAR)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
 		else
 			Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register, (PUINT)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
@@ -1387,7 +1384,7 @@
 			if (IsFlash2x(Adapter))
 				BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD);
 
-			Adapter->bHeaderChangeAllowed = FALSE;
+			Adapter->bHeaderChangeAllowed = false;
 
 			up(&Adapter->NVMRdmWrmLock);
 
@@ -1432,7 +1429,7 @@
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.bVerify :%x\n", sFlash2xRead.bVerify);
 
 		/* This was internal to driver for raw read. now it has ben exposed to user space app. */
-		if (validateFlash2xReadWrite(Adapter, &sFlash2xRead) == FALSE)
+		if (validateFlash2xReadWrite(Adapter, &sFlash2xRead) == false)
 			return STATUS_FAILURE;
 
 		NOB = sFlash2xRead.numOfBytes;
@@ -1510,7 +1507,7 @@
 		}
 
 		/* First make this False so that we can enable the Sector Permission Check in BeceemFlashBulkWrite */
-		Adapter->bAllDSDWriteAllow = FALSE;
+		Adapter->bAllDSDWriteAllow = false;
 
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_WRITE Called");
 
@@ -1531,7 +1528,7 @@
 			return -EINVAL;
 		}
 
-		if (validateFlash2xReadWrite(Adapter, &sFlash2xWrite) == FALSE)
+		if (validateFlash2xReadWrite(Adapter, &sFlash2xWrite) == false)
 			return STATUS_FAILURE;
 
 		InputAddr = sFlash2xWrite.pDataBuff;
@@ -1686,7 +1683,7 @@
 
 	case IOCTL_BCM_IDENTIFY_ACTIVE_SECTION: {
 		/* Right Now we are taking care of only DSD */
-		Adapter->bAllDSDWriteAllow = FALSE;
+		Adapter->bAllDSDWriteAllow = false;
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_IDENTIFY_ACTIVE_SECTION called");
 		Status = STATUS_SUCCESS;
 	}
@@ -1697,7 +1694,7 @@
 		Status = STATUS_SUCCESS;
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_COPY_SECTION  Called");
 
-		Adapter->bAllDSDWriteAllow = FALSE;
+		Adapter->bAllDSDWriteAllow = false;
 		if (IsFlash2x(Adapter) != TRUE) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
 			return -EINVAL;
@@ -1720,12 +1717,12 @@
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "offset :%x", sCopySectStrut.offset);
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "NOB :%x", sCopySectStrut.numOfBytes);
 
-		if (IsSectionExistInFlash(Adapter, sCopySectStrut.SrcSection) == FALSE) {
+		if (IsSectionExistInFlash(Adapter, sCopySectStrut.SrcSection) == false) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Source Section<%x> does not exixt in Flash ", sCopySectStrut.SrcSection);
 			return -EINVAL;
 		}
 
-		if (IsSectionExistInFlash(Adapter, sCopySectStrut.DstSection) == FALSE) {
+		if (IsSectionExistInFlash(Adapter, sCopySectStrut.DstSection) == false) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Destinatio Section<%x> does not exixt in Flash ", sCopySectStrut.DstSection);
 			return -EINVAL;
 		}
@@ -1924,7 +1921,7 @@
 				OutPutBuff = OutPutBuff + ReadBytes;
 			}
 		}
-		Adapter->bFlashRawRead = FALSE;
+		Adapter->bFlashRawRead = false;
 		up(&Adapter->NVMRdmWrmLock);
 		kfree(pReadBuff);
 		break;
diff --git a/drivers/staging/bcm/Bcmnet.c b/drivers/staging/bcm/Bcmnet.c
index 4e470d4..53fee2f 100644
--- a/drivers/staging/bcm/Bcmnet.c
+++ b/drivers/staging/bcm/Bcmnet.c
@@ -6,7 +6,7 @@
 {
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(dev);
 
-	if (Adapter->fw_download_done == FALSE) {
+	if (Adapter->fw_download_done == false) {
 		pr_notice(PFX "%s: link up failed (download in progress)\n",
 			  dev->name);
 		return -EBUSY;
@@ -142,7 +142,8 @@
 			    struct ethtool_drvinfo *info)
 {
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(dev);
-	struct bcm_interface_adapter *psIntfAdapter = Adapter->pvInterfaceAdapter;
+	struct bcm_interface_adapter *psIntfAdapter =
+						Adapter->pvInterfaceAdapter;
 	struct usb_device *udev = interface_to_usbdev(psIntfAdapter->interface);
 
 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
diff --git a/drivers/staging/bcm/CmHost.c b/drivers/staging/bcm/CmHost.c
index 97651450..cc91b5e 100644
--- a/drivers/staging/bcm/CmHost.c
+++ b/drivers/staging/bcm/CmHost.c
@@ -113,7 +113,7 @@
 static inline VOID
 CopyIpAddrToClassifier(struct bcm_classifier_rule *pstClassifierEntry,
 		B_UINT8 u8IpAddressLen, B_UINT8 *pu8IpAddressMaskSrc,
-		BOOLEAN bIpVersion6, enum bcm_ipaddr_context eIpAddrContext)
+		bool bIpVersion6, enum bcm_ipaddr_context eIpAddrContext)
 {
 	int i = 0;
 	UINT nSizeOfIPAddressInBytes = IP_LENGTH_OF_ADDRESS;
@@ -213,7 +213,7 @@
 	}
 }
 
-void ClearTargetDSXBuffer(struct bcm_mini_adapter *Adapter, B_UINT16 TID, BOOLEAN bFreeAll)
+void ClearTargetDSXBuffer(struct bcm_mini_adapter *Adapter, B_UINT16 TID, bool bFreeAll)
 {
 	int i;
 
@@ -256,7 +256,7 @@
 	pstClassifierEntry = &Adapter->astClassifierTable[nClassifierIndex];
 	if (pstClassifierEntry) {
 		/* Store if Ipv6 */
-		pstClassifierEntry->bIpv6Protocol = (Adapter->PackInfo[uiSearchRuleIndex].ucIpVersion == IPV6) ? TRUE : FALSE;
+		pstClassifierEntry->bIpv6Protocol = (Adapter->PackInfo[uiSearchRuleIndex].ucIpVersion == IPV6) ? TRUE : false;
 
 		/* Destinaiton Port */
 		pstClassifierEntry->ucDestPortRangeLength = psfCSType->cCPacketClassificationRule.u8ProtocolDestPortRangeLength / 4;
@@ -301,7 +301,7 @@
 				psfCSType->cCPacketClassificationRule.u8IPDestinationAddressLength,
 				psfCSType->cCPacketClassificationRule.u8IPDestinationAddress,
 				(Adapter->PackInfo[uiSearchRuleIndex].ucIpVersion == IPV6) ?
-			TRUE : FALSE, eDestIpAddress);
+			TRUE : false, eDestIpAddress);
 
 		/* Source Ip Address and Mask */
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Ip Source Parameters : ");
@@ -309,7 +309,7 @@
 		CopyIpAddrToClassifier(pstClassifierEntry,
 				psfCSType->cCPacketClassificationRule.u8IPMaskedSourceAddressLength,
 				psfCSType->cCPacketClassificationRule.u8IPMaskedSourceAddress,
-				(Adapter->PackInfo[uiSearchRuleIndex].ucIpVersion == IPV6) ? TRUE : FALSE,
+				(Adapter->PackInfo[uiSearchRuleIndex].ucIpVersion == IPV6) ? TRUE : false,
 				eSrcIpAddress);
 
 		/* TOS */
@@ -383,7 +383,7 @@
 	u16PacketClassificationRuleIndex = Adapter->astClassifierTable[nClassifierIndex].uiClassifierRuleIndex;
 	pstClassifierEntry = &Adapter->astClassifierTable[nClassifierIndex];
 	if (pstClassifierEntry) {
-		pstClassifierEntry->bUsed = FALSE;
+		pstClassifierEntry->bUsed = false;
 		pstClassifierEntry->uiClassifierRuleIndex = 0;
 		memset(pstClassifierEntry, 0, sizeof(struct bcm_classifier_rule));
 
@@ -685,7 +685,7 @@
 							memcpy(sPhsRule.u8PHSF, psfCSType->cPhsRule.u8PHSF, MAX_PHS_LENGTHS);
 							memcpy(sPhsRule.u8PHSM, psfCSType->cPhsRule.u8PHSM, MAX_PHS_LENGTHS);
 							sPhsRule.u8RefCnt = 0;
-							sPhsRule.bUnclassifiedPHSRule = FALSE;
+							sPhsRule.bUnclassifiedPHSRule = false;
 							sPhsRule.PHSModifiedBytes = 0;
 							sPhsRule.PHSModifiedNumPackets = 0;
 							sPhsRule.PHSErrorNumPackets = 0;
@@ -837,7 +837,7 @@
 	UINT nCurClassifierCnt;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
 
-	pstAddIndication = (struct bcm_add_indication_alt *)pvBuffer;
+	pstAddIndication = pvBuffer;
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "======>");
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8Type: 0x%X", pstAddIndication->u8Type);
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8Direction: 0x%X", pstAddIndication->u8Direction);
@@ -1339,14 +1339,14 @@
 	UINT uiSearchRuleIndex;
 	ULONG ulSFID;
 
-	pstAddIndicationAlt = (struct bcm_add_indication_alt *)(pvBuffer);
+	pstAddIndicationAlt = pvBuffer;
 
 	/*
 	 * In case of DSD Req By MS, we should immediately delete this SF so that
 	 * we can stop the further classifying the pkt for this SF.
 	 */
 	if (pstAddIndicationAlt->u8Type == DSD_REQ) {
-		pstDeletionRequest = (struct bcm_del_request *)pvBuffer;
+		pstDeletionRequest = pvBuffer;
 
 		ulSFID = ntohl(pstDeletionRequest->u32SFID);
 		uiSearchRuleIndex = SearchSfid(Adapter, ulSFID);
@@ -1452,12 +1452,12 @@
 	struct bcm_add_indication *pstAddIndication = NULL;
 	struct bcm_add_indication_alt *pstAddIndicationDest = NULL;
 
-	pstAddIndication = (struct bcm_add_indication *)(pvBuffer);
+	pstAddIndication = pvBuffer;
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "=====>");
 	if ((pstAddIndication->u8Type == DSD_REQ) ||
 		(pstAddIndication->u8Type == DSD_RSP) ||
 		(pstAddIndication->u8Type == DSD_ACK))
-		return (struct bcm_add_indication_alt *)pvBuffer;
+		return pvBuffer;
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Inside RestoreCmControlResponseMessage ");
 	/*
@@ -1577,7 +1577,7 @@
 	ULONG idx, max_try;
 
 	if ((Adapter->ulTotalTargetBuffersAvailable == 0) || (Adapter->ulFreeTargetBufferCnt == 0)) {
-		ClearTargetDSXBuffer(Adapter, tid, FALSE);
+		ClearTargetDSXBuffer(Adapter, tid, false);
 		return 0;
 	}
 
@@ -1590,7 +1590,7 @@
 
 	if (max_try == 0) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "\n GetNextTargetBufferLocation : Error No Free Target DSX Buffers FreeCnt : %lx ", Adapter->ulFreeTargetBufferCnt);
-		ClearTargetDSXBuffer(Adapter, tid, FALSE);
+		ClearTargetDSXBuffer(Adapter, tid, false);
 		return 0;
 	}
 
@@ -1630,7 +1630,7 @@
  * for the Connection Management.
  * @return - Queue index for the free SFID else returns Invalid Index.
  */
-BOOLEAN CmControlResponseMessage(struct bcm_mini_adapter *Adapter,  /* <Pointer to the Adapter structure */
+bool CmControlResponseMessage(struct bcm_mini_adapter *Adapter,  /* <Pointer to the Adapter structure */
 				PVOID pvBuffer /* Starting Address of the Buffer, that contains the AddIndication Data */)
 {
 	struct bcm_connect_mgr_params *psfLocalSet = NULL;
@@ -1644,9 +1644,9 @@
 	 */
 	pstAddIndication = RestoreCmControlResponseMessage(Adapter, pvBuffer);
 	if (pstAddIndication == NULL) {
-		ClearTargetDSXBuffer(Adapter, ((struct bcm_add_indication *)pvBuffer)->u16TID, FALSE);
+		ClearTargetDSXBuffer(Adapter, ((struct bcm_add_indication *)pvBuffer)->u16TID, false);
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Error in restoring Service Flow param structure from DSx message");
-		return FALSE;
+		return false;
 	}
 
 	DumpCmControlPacket(pstAddIndication);
@@ -1656,7 +1656,7 @@
 	pLeader->Status = CM_CONTROL_NEWDSX_MULTICLASSIFIER_REQ;
 	pLeader->Vcid = 0;
 
-	ClearTargetDSXBuffer(Adapter, pstAddIndication->u16TID, FALSE);
+	ClearTargetDSXBuffer(Adapter, pstAddIndication->u16TID, false);
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "### TID RECEIVED %d\n", pstAddIndication->u16TID);
 	switch (pstAddIndication->u8Type) {
 	case DSA_REQ:
@@ -1708,9 +1708,9 @@
 			if (pstAddIndication->sfAdmittedSet.bValid == TRUE)
 				Adapter->PackInfo[uiSearchRuleIndex].bAdmittedSet = TRUE;
 
-			if (pstAddIndication->sfActiveSet.bValid == FALSE) {
-				Adapter->PackInfo[uiSearchRuleIndex].bActive = FALSE;
-				Adapter->PackInfo[uiSearchRuleIndex].bActivateRequestSent = FALSE;
+			if (pstAddIndication->sfActiveSet.bValid == false) {
+				Adapter->PackInfo[uiSearchRuleIndex].bActive = false;
+				Adapter->PackInfo[uiSearchRuleIndex].bActivateRequestSent = false;
 				if (pstAddIndication->sfAdmittedSet.bValid)
 					psfLocalSet = &pstAddIndication->sfAdmittedSet;
 				else if (pstAddIndication->sfAuthorizedSet.bValid)
@@ -1722,8 +1722,8 @@
 
 			if (!psfLocalSet) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No set is valid\n");
-				Adapter->PackInfo[uiSearchRuleIndex].bActive = FALSE;
-				Adapter->PackInfo[uiSearchRuleIndex].bValid = FALSE;
+				Adapter->PackInfo[uiSearchRuleIndex].bActive = false;
+				Adapter->PackInfo[uiSearchRuleIndex].bValid = false;
 				Adapter->PackInfo[uiSearchRuleIndex].usVCID_Value = 0;
 				kfree(pstAddIndication);
 			} else if (psfLocalSet->bValid && (pstAddIndication->u8CC == 0)) {
@@ -1759,15 +1759,15 @@
 					}
 				}
 			} else {
-				Adapter->PackInfo[uiSearchRuleIndex].bActive = FALSE;
-				Adapter->PackInfo[uiSearchRuleIndex].bValid = FALSE;
+				Adapter->PackInfo[uiSearchRuleIndex].bActive = false;
+				Adapter->PackInfo[uiSearchRuleIndex].bValid = false;
 				Adapter->PackInfo[uiSearchRuleIndex].usVCID_Value = 0;
 				kfree(pstAddIndication);
 			}
 		} else {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "DSA ACK did not get valid SFID");
 			kfree(pstAddIndication);
-			return FALSE;
+			return false;
 		}
 	}
 	break;
@@ -1812,9 +1812,9 @@
 			if (pstChangeIndication->sfAdmittedSet.bValid == TRUE)
 				Adapter->PackInfo[uiSearchRuleIndex].bAdmittedSet = TRUE;
 
-			if (pstChangeIndication->sfActiveSet.bValid == FALSE) {
-				Adapter->PackInfo[uiSearchRuleIndex].bActive = FALSE;
-				Adapter->PackInfo[uiSearchRuleIndex].bActivateRequestSent = FALSE;
+			if (pstChangeIndication->sfActiveSet.bValid == false) {
+				Adapter->PackInfo[uiSearchRuleIndex].bActive = false;
+				Adapter->PackInfo[uiSearchRuleIndex].bActivateRequestSent = false;
 
 				if (pstChangeIndication->sfAdmittedSet.bValid)
 					psfLocalSet = &pstChangeIndication->sfAdmittedSet;
@@ -1827,8 +1827,8 @@
 
 			if (!psfLocalSet) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No set is valid\n");
-				Adapter->PackInfo[uiSearchRuleIndex].bActive = FALSE;
-				Adapter->PackInfo[uiSearchRuleIndex].bValid = FALSE;
+				Adapter->PackInfo[uiSearchRuleIndex].bActive = false;
+				Adapter->PackInfo[uiSearchRuleIndex].bValid = false;
 				Adapter->PackInfo[uiSearchRuleIndex].usVCID_Value = 0;
 				kfree(pstAddIndication);
 			} else if (psfLocalSet->bValid && (pstChangeIndication->u8CC == 0)) {
@@ -1847,7 +1847,7 @@
 		} else {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "DSC ACK did not get valid SFID");
 			kfree(pstAddIndication);
-			return FALSE;
+			return false;
 		}
 	}
 	break;
@@ -1883,7 +1883,7 @@
 		break;
 	default:
 		kfree(pstAddIndication);
-		return FALSE;
+		return false;
 	}
 	return TRUE;
 }
@@ -1934,13 +1934,13 @@
 			continue;
 		}
 
-		if (pHostInfo->RetainSF == FALSE) {
+		if (pHostInfo->RetainSF == false) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Going to Delete SF");
 			deleteSFBySfid(Adapter, uiSearchRuleIndex);
 		} else {
 			Adapter->PackInfo[uiSearchRuleIndex].usVCID_Value = ntohs(pHostInfo->VCID);
 			Adapter->PackInfo[uiSearchRuleIndex].usCID = ntohs(pHostInfo->newCID);
-			Adapter->PackInfo[uiSearchRuleIndex].bActive = FALSE;
+			Adapter->PackInfo[uiSearchRuleIndex].bActive = false;
 
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "pHostInfo->QoSParamSet: 0x%x\n", pHostInfo->QoSParamSet);
 
diff --git a/drivers/staging/bcm/CmHost.h b/drivers/staging/bcm/CmHost.h
index 4ddfc3d4..0887d3f 100644
--- a/drivers/staging/bcm/CmHost.h
+++ b/drivers/staging/bcm/CmHost.h
@@ -55,7 +55,7 @@
 int AllocAdapterDsxBuffer(struct bcm_mini_adapter *Adapter);
 int FreeAdapterDsxBuffer(struct bcm_mini_adapter *Adapter);
 unsigned long SetUpTargetDsxBuffers(struct bcm_mini_adapter *Adapter);
-BOOLEAN CmControlResponseMessage(struct bcm_mini_adapter *Adapter, void *pvBuffer);
+bool CmControlResponseMessage(struct bcm_mini_adapter *Adapter, void *pvBuffer);
 
 #pragma pack(pop)
 
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index f5eda96..9f7e30f 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -1106,7 +1106,7 @@
 	unsigned long ul_ddr_setting_load_addr = DDR_DUMP_INTERNAL_DEVICE_MEMORY;
 	UINT  value = 0;
 	int retval = STATUS_SUCCESS;
-	BOOLEAN bOverrideSelfRefresh = FALSE;
+	bool bOverrideSelfRefresh = false;
 
 	switch (Adapter->chip_id)
 	{
diff --git a/drivers/staging/bcm/HandleControlPacket.c b/drivers/staging/bcm/HandleControlPacket.c
index 1bb53e2..495fe3d 100644
--- a/drivers/staging/bcm/HandleControlPacket.c
+++ b/drivers/staging/bcm/HandleControlPacket.c
@@ -14,10 +14,10 @@
 static VOID handle_rx_control_packet(struct bcm_mini_adapter *Adapter, struct sk_buff *skb)
 {
 	struct bcm_tarang_data *pTarang = NULL;
-	BOOLEAN HighPriorityMessage = FALSE;
+	bool HighPriorityMessage = false;
 	struct sk_buff *newPacket = NULL;
 	CHAR cntrl_msg_mask_bit = 0;
-	BOOLEAN drop_pkt_flag = TRUE;
+	bool drop_pkt_flag = TRUE;
 	USHORT usStatus = *(PUSHORT)(skb->data);
 
 	if (netif_msg_pktdata(Adapter))
@@ -91,13 +91,13 @@
 		 *	cntrl_msg_mask_bit);
 		 */
 		if (pTarang->RxCntrlMsgBitMask & (1 << cntrl_msg_mask_bit))
-			drop_pkt_flag = FALSE;
+			drop_pkt_flag = false;
 
 		if ((drop_pkt_flag == TRUE) ||
 				(pTarang->AppCtrlQueueLen > MAX_APP_QUEUE_LEN)
 				|| ((pTarang->AppCtrlQueueLen >
 					MAX_APP_QUEUE_LEN / 2) &&
-				    (HighPriorityMessage == FALSE))) {
+				    (HighPriorityMessage == false))) {
 			/*
 			 * Assumption:-
 			 * 1. every tarang manages it own dropped pkt
@@ -175,8 +175,8 @@
 			return 0;
 		}
 		if (TRUE == Adapter->bWakeUpDevice) {
-			Adapter->bWakeUpDevice = FALSE;
-			if ((FALSE == Adapter->bTriedToWakeUpFromlowPowerMode)
+			Adapter->bWakeUpDevice = false;
+			if ((false == Adapter->bTriedToWakeUpFromlowPowerMode)
 					&& ((TRUE == Adapter->IdleMode) ||
 					    (TRUE == Adapter->bShutStatus))) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c
index 6d803e7..cd160670 100644
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@@ -1,13 +1,13 @@
 #include "headers.h"
 
-static BOOLEAN MatchSrcIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
+static bool MatchSrcIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
 	struct bcm_ipv6_hdr *pstIpv6Header);
-static BOOLEAN MatchDestIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
+static bool MatchDestIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
 	struct bcm_ipv6_hdr *pstIpv6Header);
 static VOID DumpIpv6Header(struct bcm_ipv6_hdr *pstIpv6Header);
 
 static UCHAR *GetNextIPV6ChainedHeader(UCHAR **ppucPayload,
-	UCHAR *pucNextHeader, BOOLEAN *bParseDone, USHORT *pusPayloadLength)
+	UCHAR *pucNextHeader, bool *bParseDone, USHORT *pusPayloadLength)
 {
 	UCHAR *pucRetHeaderPtr = NULL;
 	UCHAR *pucPayloadPtr = NULL;
@@ -29,7 +29,7 @@
 	}
 
 	/* Get the Nextt Header Type */
-	*bParseDone = FALSE;
+	*bParseDone = false;
 
 
 	switch (*pucNextHeader) {
@@ -124,7 +124,7 @@
 
 	}
 
-	if (*bParseDone == FALSE) {
+	if (*bParseDone == false) {
 		if (*pusPayloadLength <= usNextHeaderOffset) {
 			*bParseDone = TRUE;
 		} else {
@@ -144,7 +144,7 @@
 	USHORT *pusDestPort, USHORT usPayloadLength, UCHAR ucNextHeader)
 {
 	UCHAR *pIpv6HdrScanContext = pucPayload;
-	BOOLEAN bDone = FALSE;
+	bool bDone = false;
 	UCHAR ucHeaderType = 0;
 	UCHAR *pucNextHeader = NULL;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -187,12 +187,12 @@
 	USHORT	ushSrcPort = 0;
 	UCHAR   ucNextProtocolAboveIP = 0;
 	struct bcm_ipv6_hdr *pstIpv6Header = NULL;
-	BOOLEAN bClassificationSucceed = FALSE;
+	bool bClassificationSucceed = false;
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
 			DBG_LVL_ALL, "IpVersion6 ==========>\n");
 
-	pstIpv6Header = (struct bcm_ipv6_hdr *)pcIpHeader;
+	pstIpv6Header = pcIpHeader;
 
 	DumpIpv6Header(pstIpv6Header);
 
@@ -277,10 +277,10 @@
 		INT iMatchedSFQueueIndex = 0;
 		iMatchedSFQueueIndex = SearchSfid(Adapter, pstClassifierRule->ulSFID);
 		if (iMatchedSFQueueIndex >= NO_OF_QUEUES) {
-			bClassificationSucceed = FALSE;
+			bClassificationSucceed = false;
 		} else {
-			if (Adapter->PackInfo[iMatchedSFQueueIndex].bActive == FALSE)
-				bClassificationSucceed = FALSE;
+			if (Adapter->PackInfo[iMatchedSFQueueIndex].bActive == false)
+				bClassificationSucceed = false;
 		}
 	}
 
@@ -288,7 +288,7 @@
 }
 
 
-static BOOLEAN MatchSrcIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
+static bool MatchSrcIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
 	struct bcm_ipv6_hdr *pstIpv6Header)
 {
 	UINT uiLoopIndex = 0;
@@ -341,10 +341,10 @@
 			}
 		}
 	}
-	return FALSE;
+	return false;
 }
 
-static BOOLEAN MatchDestIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
+static bool MatchDestIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
 	struct bcm_ipv6_hdr *pstIpv6Header)
 {
 	UINT uiLoopIndex = 0;
@@ -398,7 +398,7 @@
 			}
 		}
 	}
-	return FALSE;
+	return false;
 
 }
 
diff --git a/drivers/staging/bcm/InterfaceDld.c b/drivers/staging/bcm/InterfaceDld.c
index 348ad75..463bdee 100644
--- a/drivers/staging/bcm/InterfaceDld.c
+++ b/drivers/staging/bcm/InterfaceDld.c
@@ -6,7 +6,7 @@
 	mm_segment_t oldfs = {0};
 	int errno = 0, len = 0; /* ,is_config_file = 0 */
 	loff_t pos = 0;
-	struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)arg;
+	struct bcm_interface_adapter *psIntfAdapter = arg;
 	/* struct bcm_mini_adapter *Adapter = psIntfAdapter->psAdapter; */
 	char *buff = kmalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_KERNEL);
 
@@ -61,7 +61,7 @@
 	loff_t pos = 0;
 	static int fw_down;
 	INT Status = STATUS_SUCCESS;
-	struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)arg;
+	struct bcm_interface_adapter *psIntfAdapter = arg;
 	int bytes;
 
 	buff = kmalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_DMA);
@@ -166,7 +166,7 @@
 	}
 
 	if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
-		Adapter->LEDInfo.bLedInitDone = FALSE;
+		Adapter->LEDInfo.bLedInitDone = false;
 		Adapter->DriverState = DRIVER_INIT;
 		wake_up(&Adapter->LEDInfo.notify_led_event);
 	}
@@ -214,7 +214,7 @@
 	 * Firmware. Check for the Config file to be first to be sent from the
 	 * Application
 	 */
-	atomic_set(&Adapter->uiMBupdate, FALSE);
+	atomic_set(&Adapter->uiMBupdate, false);
 	if (!Adapter->bCfgDownloaded && psFwInfo->u32StartingAddress != CONFIG_BEGIN_ADDR) {
 		/* Can't Download Firmware. */
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Download the config File first\n");
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index 5347828..5959fbd 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -89,8 +89,8 @@
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
 
 			/* Set Idle Mode Flag to False and Clear IdleMode reg. */
-			Adapter->IdleMode = FALSE;
-			Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
+			Adapter->IdleMode = false;
+			Adapter->bTriedToWakeUpFromlowPowerMode = false;
 
 			wake_up(&Adapter->lowpower_mode_wait_queue);
 
diff --git a/drivers/staging/bcm/InterfaceInit.c b/drivers/staging/bcm/InterfaceInit.c
index 79058ce..3acdb58 100644
--- a/drivers/staging/bcm/InterfaceInit.c
+++ b/drivers/staging/bcm/InterfaceInit.c
@@ -332,7 +332,7 @@
 		 * now register the cntrl interface.
 		 * after downloading the f/w waiting for 5 sec to get the mailbox interrupt.
 		 */
-		psIntfAdapter->psAdapter->waiting_to_fw_download_done = FALSE;
+		psIntfAdapter->psAdapter->waiting_to_fw_download_done = false;
 		value = wait_event_timeout(psIntfAdapter->psAdapter->ioctl_fw_dnld_wait_queue,
 					psIntfAdapter->psAdapter->waiting_to_fw_download_done, 5*HZ);
 
@@ -430,7 +430,7 @@
 	unsigned long value;
 	int retval = 0;
 	int usedIntOutForBulkTransfer = 0 ;
-	BOOLEAN bBcm16 = FALSE;
+	bool bBcm16 = false;
 	UINT uiData = 0;
 	int bytes;
 
@@ -472,7 +472,7 @@
 				retval = usb_set_interface(psIntfAdapter->udev, DEFAULT_SETTING_0, ALTERNATE_SETTING_1);
 			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
 				"BCM16 is applicable on this dongle\n");
-			if (retval || (psIntfAdapter->bHighSpeedDevice == FALSE)) {
+			if (retval || (psIntfAdapter->bHighSpeedDevice == false)) {
 				usedIntOutForBulkTransfer = EP2 ;
 				endpoint = &iface_desc->endpoint[EP2].desc;
 				BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
@@ -481,8 +481,8 @@
 				 * If Modem is high speed device EP2 should be INT OUT End point
 				 * If Mode is FS then EP2 should be bulk end point
 				 */
-				if (((psIntfAdapter->bHighSpeedDevice == TRUE) && (bcm_usb_endpoint_is_int_out(endpoint) == FALSE))
-					|| ((psIntfAdapter->bHighSpeedDevice == FALSE) && (bcm_usb_endpoint_is_bulk_out(endpoint) == FALSE))) {
+				if (((psIntfAdapter->bHighSpeedDevice == TRUE) && (bcm_usb_endpoint_is_int_out(endpoint) == false))
+					|| ((psIntfAdapter->bHighSpeedDevice == false) && (bcm_usb_endpoint_is_bulk_out(endpoint) == false))) {
 					BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
 						"Configuring the EEPROM\n");
 					/* change the EP2, EP4 to INT OUT end point */
@@ -501,7 +501,7 @@
 					}
 
 				}
-				if ((psIntfAdapter->bHighSpeedDevice == FALSE) && bcm_usb_endpoint_is_bulk_out(endpoint)) {
+				if ((psIntfAdapter->bHighSpeedDevice == false) && bcm_usb_endpoint_is_bulk_out(endpoint)) {
 					/* Once BULK is selected in FS mode. Revert it back to INT. Else USB_IF will fail. */
 					UINT _uiData = ntohl(EP2_CFG_INT);
 					BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
@@ -513,7 +513,7 @@
 				endpoint = &iface_desc->endpoint[EP4].desc;
 				BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
 					"Choosing AltSetting as a default setting.\n");
-				if (bcm_usb_endpoint_is_int_out(endpoint) == FALSE) {
+				if (bcm_usb_endpoint_is_int_out(endpoint) == false) {
 					BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
 						"Dongle does not have BCM16 Fix.\n");
 					/* change the EP2, EP4 to INT OUT end point and use EP4 in altsetting */
@@ -619,7 +619,7 @@
 	psIntfAdapter->bSuspended = TRUE;
 
 	if (TRUE == psIntfAdapter->bPreparingForBusSuspend) {
-		psIntfAdapter->bPreparingForBusSuspend = FALSE;
+		psIntfAdapter->bPreparingForBusSuspend = false;
 
 		if (psIntfAdapter->psAdapter->LinkStatus == LINKUP_DONE) {
 			psIntfAdapter->psAdapter->IdleMode = TRUE ;
@@ -631,7 +631,7 @@
 				"Host Entered in PMU Shutdown Mode.\n");
 		}
 	}
-	psIntfAdapter->psAdapter->bPreparingForLowPowerMode = FALSE;
+	psIntfAdapter->psAdapter->bPreparingForLowPowerMode = false;
 
 	/* Signaling the control pkt path */
 	wake_up(&psIntfAdapter->psAdapter->lowpower_mode_wait_queue);
@@ -644,7 +644,7 @@
 	struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf);
 
 	mdelay(100);
-	psIntfAdapter->bSuspended = FALSE;
+	psIntfAdapter->bSuspended = false;
 
 	StartInterruptUrb(psIntfAdapter);
 	InterfaceRx(psIntfAdapter);
diff --git a/drivers/staging/bcm/InterfaceIsr.c b/drivers/staging/bcm/InterfaceIsr.c
index 8322f1b..7b39f4f 100644
--- a/drivers/staging/bcm/InterfaceIsr.c
+++ b/drivers/staging/bcm/InterfaceIsr.c
@@ -60,7 +60,7 @@
 				psIntfAdapter->psAdapter->downloadDDR +=1;
 				wake_up(&Adapter->tx_packet_wait_queue);
 			}
-			if(FALSE == Adapter->waiting_to_fw_download_done)
+			if(false == Adapter->waiting_to_fw_download_done)
 			{
 				Adapter->waiting_to_fw_download_done = TRUE;
 				wake_up(&Adapter->ioctl_fw_dnld_wait_queue);
@@ -147,11 +147,11 @@
 {
 	INT status = 0;
 
-	if( FALSE == psIntfAdapter->psAdapter->device_removed &&
-		FALSE == psIntfAdapter->psAdapter->bEndPointHalted &&
-		FALSE == psIntfAdapter->bSuspended &&
-		FALSE == psIntfAdapter->bPreparingForBusSuspend &&
-		FALSE == psIntfAdapter->psAdapter->StopAllXaction)
+	if( false == psIntfAdapter->psAdapter->device_removed &&
+		false == psIntfAdapter->psAdapter->bEndPointHalted &&
+		false == psIntfAdapter->bSuspended &&
+		false == psIntfAdapter->bPreparingForBusSuspend &&
+		false == psIntfAdapter->psAdapter->StopAllXaction)
 	{
 		status = usb_submit_urb(psIntfAdapter->psInterruptUrb, GFP_ATOMIC);
 		if (status)
diff --git a/drivers/staging/bcm/InterfaceMisc.c b/drivers/staging/bcm/InterfaceMisc.c
index afca010..4173fd7 100644
--- a/drivers/staging/bcm/InterfaceMisc.c
+++ b/drivers/staging/bcm/InterfaceMisc.c
@@ -44,7 +44,7 @@
 	else
 		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM sent %d", bytes);
 
-	psIntfAdapter->psAdapter->DeviceAccess = FALSE;
+	psIntfAdapter->psAdapter->DeviceAccess = false;
 	return bytes;
 }
 
@@ -90,10 +90,10 @@
 
 	if (retval < 0)	{
 		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, WRM, DBG_LVL_ALL, "WRM failed status :%d", retval);
-		psIntfAdapter->psAdapter->DeviceAccess = FALSE;
+		psIntfAdapter->psAdapter->DeviceAccess = false;
 		return retval;
 	} else {
-		psIntfAdapter->psAdapter->DeviceAccess = FALSE;
+		psIntfAdapter->psAdapter->DeviceAccess = false;
 		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, WRM, DBG_LVL_ALL, "WRM sent %d", retval);
 		return STATUS_SUCCESS;
 	}
@@ -104,7 +104,7 @@
 	void *buff,
 	int len)
 {
-	return InterfaceRDM((struct bcm_interface_adapter*)arg, addr, buff, len);
+	return InterfaceRDM((struct bcm_interface_adapter *)arg, addr, buff, len);
 }
 
 int BcmWRM(void *arg,
@@ -211,7 +211,7 @@
 	psIntfAdapter = container_of(work, struct bcm_interface_adapter, usbSuspendWork);
 	intf = psIntfAdapter->interface;
 
-	if (psIntfAdapter->bSuspended == FALSE)
+	if (psIntfAdapter->bSuspended == false)
 		usb_autopm_put_interface(intf);
 }
 
diff --git a/drivers/staging/bcm/InterfaceRx.c b/drivers/staging/bcm/InterfaceRx.c
index 26f5bc7..f2973f5 100644
--- a/drivers/staging/bcm/InterfaceRx.c
+++ b/drivers/staging/bcm/InterfaceRx.c
@@ -19,7 +19,7 @@
 	UINT index = 0;
 
 	if((atomic_read(&psIntfAdapter->uNumRcbUsed) < MAXIMUM_USB_RCB) &&
-		(psIntfAdapter->psAdapter->StopAllXaction == FALSE))
+		(psIntfAdapter->psAdapter->StopAllXaction == false))
 	{
 		index = atomic_read(&psIntfAdapter->uCurrRcb);
 		pRcb = &psIntfAdapter->asUsbRcb[index];
@@ -38,7 +38,7 @@
 static void read_bulk_callback(struct urb *urb)
 {
 	struct sk_buff *skb = NULL;
-	BOOLEAN bHeaderSupressionEnabled = FALSE;
+	bool bHeaderSupressionEnabled = false;
 	int QueueIndex = NO_OF_QUEUES + 1;
 	UINT uiIndex=0;
 	int process_done = 1;
@@ -57,7 +57,7 @@
 		(0 == urb->actual_length)
 		)
 	{
-	 	pRcb->bUsed = FALSE;
+	 	pRcb->bUsed = false;
  		atomic_dec(&psIntfAdapter->uNumRcbUsed);
 		return;
 	}
@@ -73,7 +73,7 @@
 		{
 			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL,"Rx URB has got cancelled. status :%d", urb->status);
 		}
-		pRcb->bUsed = FALSE;
+		pRcb->bUsed = false;
  		atomic_dec(&psIntfAdapter->uNumRcbUsed);
 		urb->status = STATUS_SUCCESS ;
 		return ;
@@ -192,7 +192,7 @@
 		}
 	}
  	Adapter->PrevNumRecvDescs++;
-	pRcb->bUsed = FALSE;
+	pRcb->bUsed = false;
 	atomic_dec(&psIntfAdapter->uNumRcbUsed);
 }
 
@@ -205,10 +205,10 @@
 			psIntfAdapter->udev, psIntfAdapter->sBulkIn.bulk_in_endpointAddr),
 		  	urb->transfer_buffer, BCM_USB_MAX_READ_LENGTH, read_bulk_callback,
 			pRcb);
-	if(FALSE == psIntfAdapter->psAdapter->device_removed &&
-	   FALSE == psIntfAdapter->psAdapter->bEndPointHalted &&
-	   FALSE == psIntfAdapter->bSuspended &&
-	   FALSE == psIntfAdapter->bPreparingForBusSuspend)
+	if(false == psIntfAdapter->psAdapter->device_removed &&
+	   false == psIntfAdapter->psAdapter->bEndPointHalted &&
+	   false == psIntfAdapter->bSuspended &&
+	   false == psIntfAdapter->bPreparingForBusSuspend)
 	{
 		retval = usb_submit_urb(urb, GFP_ATOMIC);
 		if (retval)
@@ -240,7 +240,7 @@
 					Other - If an error occurred.
 */
 
-BOOLEAN InterfaceRx (struct bcm_interface_adapter *psIntfAdapter)
+bool InterfaceRx (struct bcm_interface_adapter *psIntfAdapter)
 {
 	USHORT RxDescCount = NUM_RX_DESC - atomic_read(&psIntfAdapter->uNumRcbUsed);
 	struct bcm_usb_rcb *pRcb = NULL;
@@ -253,7 +253,7 @@
 		if(pRcb == NULL)
 		{
 			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Unable to get Rcb pointer");
-			return FALSE;
+			return false;
 		}
 		//atomic_inc(&psIntfAdapter->uNumRcbUsed);
 		ReceiveRcb(psIntfAdapter, pRcb);
diff --git a/drivers/staging/bcm/InterfaceRx.h b/drivers/staging/bcm/InterfaceRx.h
index 424645e..b4e858b 100644
--- a/drivers/staging/bcm/InterfaceRx.h
+++ b/drivers/staging/bcm/InterfaceRx.h
@@ -1,7 +1,7 @@
 #ifndef _INTERFACE_RX_H
 #define _INTERFACE_RX_H
 
-BOOLEAN InterfaceRx(struct bcm_interface_adapter *Adapter);
+bool InterfaceRx(struct bcm_interface_adapter *Adapter);
 
 #endif
 
diff --git a/drivers/staging/bcm/InterfaceTx.c b/drivers/staging/bcm/InterfaceTx.c
index b8c7855..b9c2784 100644
--- a/drivers/staging/bcm/InterfaceTx.c
+++ b/drivers/staging/bcm/InterfaceTx.c
@@ -7,7 +7,7 @@
 	struct bcm_interface_adapter *psIntfAdapter = pTcb->psIntfAdapter;
 	struct bcm_link_request *pControlMsg = (struct bcm_link_request *)urb->transfer_buffer;
 	struct bcm_mini_adapter *psAdapter = psIntfAdapter->psAdapter ;
-	BOOLEAN bpowerDownMsg = FALSE ;
+	bool bpowerDownMsg = false ;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
 
     if (unlikely(netif_msg_tx_done(Adapter)))
@@ -26,7 +26,7 @@
 		}
 	}
 
-	pTcb->bUsed = FALSE;
+	pTcb->bUsed = false;
 	atomic_dec(&psIntfAdapter->uNumTcbUsed);
 
 
@@ -42,7 +42,7 @@
 			//This covers the bus err while Idle Request msg sent down.
 			if(urb->status != STATUS_SUCCESS)
 			{
-				psAdapter->bPreparingForLowPowerMode = FALSE ;
+				psAdapter->bPreparingForLowPowerMode = false ;
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"Idle Mode Request msg failed to reach to Modem");
 				//Signalling the cntrl pkt path in Ioctl
 				wake_up(&psAdapter->lowpower_mode_wait_queue);
@@ -50,11 +50,11 @@
 				goto err_exit;
 			}
 
-			if(psAdapter->bDoSuspend == FALSE)
+			if(psAdapter->bDoSuspend == false)
 			{
 				psAdapter->IdleMode = TRUE;
 				//since going in Idle mode completed hence making this var false;
-				psAdapter->bPreparingForLowPowerMode = FALSE ;
+				psAdapter->bPreparingForLowPowerMode = false ;
 
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Host Entered in Idle Mode State...");
 				//Signalling the cntrl pkt path in Ioctl
@@ -70,7 +70,7 @@
 			//This covers the bus err while shutdown Request msg sent down.
 			if(urb->status != STATUS_SUCCESS)
 			{
-				psAdapter->bPreparingForLowPowerMode = FALSE ;
+				psAdapter->bPreparingForLowPowerMode = false ;
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"Shutdown Request Msg failed to reach to Modem");
 				//Signalling the cntrl pkt path in Ioctl
 				wake_up(&psAdapter->lowpower_mode_wait_queue);
@@ -79,11 +79,11 @@
 			}
 
 			bpowerDownMsg = TRUE ;
-			if(psAdapter->bDoSuspend == FALSE)
+			if(psAdapter->bDoSuspend == false)
 			{
 				psAdapter->bShutStatus = TRUE;
 				//since going in shutdown mode completed hence making this var false;
-				psAdapter->bPreparingForLowPowerMode = FALSE ;
+				psAdapter->bPreparingForLowPowerMode = false ;
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"Host Entered in shutdown Mode State...");
 				//Signalling the cntrl pkt path in Ioctl
 				wake_up(&psAdapter->lowpower_mode_wait_queue);
@@ -113,7 +113,7 @@
 	UINT index = 0;
 
 	if((atomic_read(&psIntfAdapter->uNumTcbUsed) < MAXIMUM_USB_TCB) &&
-		(psIntfAdapter->psAdapter->StopAllXaction ==FALSE))
+		(psIntfAdapter->psAdapter->StopAllXaction ==false))
 	{
 		index = atomic_read(&psIntfAdapter->uCurrTcb);
 		pTcb = &psIntfAdapter->asUsbTcb[index];
@@ -161,10 +161,10 @@
 	}
 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* For DMA transfer */
 
-	if(FALSE == psIntfAdapter->psAdapter->device_removed &&
-	   FALSE == psIntfAdapter->psAdapter->bEndPointHalted &&
-	   FALSE == psIntfAdapter->bSuspended &&
-	   FALSE == psIntfAdapter->bPreparingForBusSuspend)
+	if(false == psIntfAdapter->psAdapter->device_removed &&
+	   false == psIntfAdapter->psAdapter->bEndPointHalted &&
+	   false == psIntfAdapter->bSuspended &&
+	   false == psIntfAdapter->bPreparingForBusSuspend)
 	{
 		retval = usb_submit_urb(urb, GFP_ATOMIC);
 		if (retval)
@@ -184,7 +184,7 @@
 {
 	struct bcm_usb_tcb *pTcb= NULL;
 
-	struct bcm_interface_adapter *psIntfAdapter = (struct bcm_interface_adapter *)arg;
+	struct bcm_interface_adapter *psIntfAdapter = arg;
 	pTcb= GetBulkOutTcb(psIntfAdapter);
 	if(pTcb == NULL)
 	{
diff --git a/drivers/staging/bcm/LeakyBucket.c b/drivers/staging/bcm/LeakyBucket.c
index bc48616..f95b067 100644
--- a/drivers/staging/bcm/LeakyBucket.c
+++ b/drivers/staging/bcm/LeakyBucket.c
@@ -82,7 +82,7 @@
 		return 0;
 	}
 
-	if (FALSE != psSF->bValid && psSF->ucDirection) {
+	if (false != psSF->bValid && psSF->ucDirection) {
 		if (0 != psSF->uiCurrentTokenCount) {
 				return psSF->uiCurrentTokenCount;
 		} else {
@@ -188,7 +188,7 @@
 				spin_unlock_bh(&psSF->SFQueueLock);
 
 				Status = SendPacketFromQueue(Adapter, psSF, QueuePacket);
-				psSF->uiPendedLast = FALSE;
+				psSF->uiPendedLast = false;
 			} else {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "For Queue: %zd\n", psSF-Adapter->PackInfo);
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "\nAvailable Tokens = %d required = %d\n",
@@ -250,7 +250,7 @@
 	UINT uiPrevTotalCount = 0;
 	int iIndex = 0;
 
-	BOOLEAN exit_flag = TRUE;
+	bool exit_flag = TRUE;
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "=====>");
 
@@ -299,7 +299,7 @@
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "Calling CheckAndSendPacketFromIndex..");
 				CheckAndSendPacketFromIndex(Adapter, &Adapter->PackInfo[iIndex]);
 				uiPrevTotalCount--;
-				exit_flag = FALSE;
+				exit_flag = false;
 			}
 		}
 
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index 4cfc2c3..7b2fa0f 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -53,7 +53,7 @@
 	init_waitqueue_head(&psAdapter->ioctl_fw_dnld_wait_queue);
 	init_waitqueue_head(&psAdapter->lowpower_mode_wait_queue);
 	psAdapter->waiting_to_fw_download_done = TRUE;
-	psAdapter->fw_download_done = FALSE;
+	psAdapter->fw_download_done = false;
 
 	default_wimax_protocol_initialize(psAdapter);
 	for (i = 0; i < MAX_CNTRL_PKTS; i++) {
@@ -255,7 +255,7 @@
 
 		if (Adapter->bShutStatus == TRUE) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "SYNC UP IN SHUTDOWN..Device WakeUp\n");
-			if (Adapter->bTriedToWakeUpFromlowPowerMode == FALSE) {
+			if (Adapter->bTriedToWakeUpFromlowPowerMode == false) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Waking up for the First Time..\n");
 				Adapter->usIdleModePattern = ABORT_SHUTDOWN_MODE; /* change it to 1 for current support. */
 				Adapter->bWakeUpDevice = TRUE;
@@ -346,7 +346,7 @@
 			pktlen = pLeader->PLength;
 			Status = StoreCmControlResponseMessage(Adapter, pucAddIndication, &pktlen);
 			if (Status != 1) {
-				ClearTargetDSXBuffer(Adapter, ((struct bcm_add_indication_alt *)pucAddIndication)->u16TID, FALSE);
+				ClearTargetDSXBuffer(Adapter, ((struct bcm_add_indication_alt *)pucAddIndication)->u16TID, false);
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, " Error Restoring The DSX Control Packet. Dsx Buffers on Target may not be Setup Properly ");
 				return STATUS_FAILURE;
 			}
@@ -499,7 +499,7 @@
 			Adapter->bETHCSEnabled = *(pucBuffer+4) & ETH_CS_MASK;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Received In LinkUp Ack : %x\n", Adapter->bPHSEnabled);
 
-			if ((FALSE == Adapter->bShutStatus) && (FALSE == Adapter->IdleMode)) {
+			if ((false == Adapter->bShutStatus) && (false == Adapter->IdleMode)) {
 				if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
 					Adapter->DriverState = NORMAL_OPERATION;
 					wake_up(&Adapter->LEDInfo.notify_led_event);
@@ -517,8 +517,8 @@
 			Adapter->LinkUpStatus = 0;
 			Adapter->LinkStatus = 0;
 			Adapter->usBestEffortQueueIndex = INVALID_QUEUE_INDEX;
-			Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
-			Adapter->IdleMode = FALSE;
+			Adapter->bTriedToWakeUpFromlowPowerMode = false;
+			Adapter->IdleMode = false;
 			beceem_protocol_reset(Adapter);
 
 			break;
@@ -578,7 +578,7 @@
 
 		stIdleResponse.szData[1] = TARGET_CAN_NOT_GO_TO_IDLE_MODE; /* NACK- device access is going on. */
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "HOST IS NACKING Idle mode To F/W!!!!!!!!");
-		Adapter->bPreparingForLowPowerMode = FALSE;
+		Adapter->bPreparingForLowPowerMode = false;
 	} else {
 		stIdleResponse.szData[1] = TARGET_CAN_GO_TO_IDLE_MODE; /* 2; Idle ACK */
 		Adapter->StatisticsPointer = 0;
@@ -613,7 +613,7 @@
 			if (Adapter->bDoSuspend == TRUE)
 				Bcm_kill_all_URBs((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
 		} else {
-			Adapter->bPreparingForLowPowerMode = FALSE;
+			Adapter->bPreparingForLowPowerMode = false;
 		}
 
 		if (!NVMAccess)
@@ -626,7 +626,7 @@
 	status = CopyBufferToControlPacket(Adapter, &stIdleResponse);
 	if ((status != STATUS_SUCCESS)) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "fail to send the Idle mode Request\n");
-		Adapter->bPreparingForLowPowerMode = FALSE;
+		Adapter->bPreparingForLowPowerMode = false;
 		StartInterruptUrb((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
 	}
 	do_gettimeofday(&tv);
@@ -651,8 +651,8 @@
 
 	for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "*********** Showing Details Of Queue %d***** ******", uiLoopIndex);
-		if (FALSE == Adapter->PackInfo[uiLoopIndex].bValid) {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "bValid is FALSE for %X index\n", uiLoopIndex);
+		if (false == Adapter->PackInfo[uiLoopIndex].bValid) {
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "bValid is false for %X index\n", uiLoopIndex);
 			continue;
 		}
 
@@ -783,7 +783,7 @@
 	int bytes;
 
 	psIntfAdapter = ((struct bcm_interface_adapter *)(ps_adapter->pvInterfaceAdapter));
-	ps_adapter->bDDRInitDone = FALSE;
+	ps_adapter->bDDRInitDone = false;
 
 	if (ps_adapter->chip_id >= T3LPB) {
 		/* SYS_CFG register is write protected hence for modifying this reg value, it should be read twice before */
@@ -803,7 +803,7 @@
 	if (ps_adapter->chip_id >= T3LPB) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Resetting UMA-B\n");
 		retval = usb_reset_device(psIntfAdapter->udev);
-		psIntfAdapter->psAdapter->StopAllXaction = FALSE;
+		psIntfAdapter->psAdapter->StopAllXaction = false;
 
 		if (retval != STATUS_SUCCESS) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reset failed with ret value :%d", retval);
@@ -888,7 +888,7 @@
 	wrmalt(ps_adapter, 0x0f01186c, &uiResetValue, sizeof(uiResetValue));
 
 err_exit:
-	psIntfAdapter->psAdapter->StopAllXaction = FALSE;
+	psIntfAdapter->psAdapter->StopAllXaction = false;
 	return retval;
 }
 
@@ -968,7 +968,7 @@
 		return -EIO;
 	}
 
-	if (FALSE == ps_adapter->AutoFirmDld) {
+	if (false == ps_adapter->AutoFirmDld) {
 		BCM_DEBUG_PRINT(ps_adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "AutoFirmDld Disabled in CFG File..\n");
 		/* If Auto f/w download is disable, register the control interface, */
 		/* register the control interface after the mailbox. */
@@ -1094,7 +1094,7 @@
 
 	if (ntohl(Adapter->pstargetparams->m_u32PhyParameter2) & AUTO_SYNC_DISABLE) {
 		pr_info(DRV_NAME ": AutoSyncup is Disabled\n");
-		Adapter->AutoSyncup = FALSE;
+		Adapter->AutoSyncup = false;
 	} else {
 		pr_info(DRV_NAME ": AutoSyncup is Enabled\n");
 		Adapter->AutoSyncup = TRUE;
@@ -1105,7 +1105,7 @@
 		Adapter->AutoLinkUp = TRUE;
 	} else {
 		pr_info(DRV_NAME ": Disabling autolink up");
-		Adapter->AutoLinkUp = FALSE;
+		Adapter->AutoLinkUp = false;
 	}
 	/* Setting the DDR Setting.. */
 	Adapter->DDRSetting = (ntohl(Adapter->pstargetparams->HostDrvrConfig6) >> 8)&0x0F;
@@ -1117,7 +1117,7 @@
 		Adapter->AutoFirmDld = TRUE;
 	} else {
 		pr_info(DRV_NAME ": Disabling Auto Firmware Download\n");
-		Adapter->AutoFirmDld = FALSE;
+		Adapter->AutoFirmDld = false;
 	}
 	uiHostDrvrCfg6 = ntohl(Adapter->pstargetparams->HostDrvrConfig6);
 	Adapter->bMipsConfig = (uiHostDrvrCfg6>>20)&0x01;
@@ -1155,21 +1155,21 @@
 
 	if (reporting_mode == TRUE) {
 		BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "can't do suspen/resume as reporting mode is enable");
-		psAdapter->bDoSuspend = FALSE;
+		psAdapter->bDoSuspend = false;
 	}
 
 	if (psAdapter->bIsAutoCorrectEnabled && (psAdapter->chip_id >= T3LPB)) {
 		/* If reporting mode is enable, switch PMU to PMC */
 		{
 			psAdapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PMU_CLOCK_GATING;
-			psAdapter->bDoSuspend = FALSE;
+			psAdapter->bDoSuspend = false;
 		}
 
 		/* clearing space bit[15..12] */
 		psAdapter->pstargetparams->HostDrvrConfig6 &= ~(htonl((0xF << 12)));
 		/* placing the power save mode option */
 		psAdapter->pstargetparams->HostDrvrConfig6 |= htonl((psAdapter->ulPowerSaveMode << 12));
-	} else if (psAdapter->bIsAutoCorrectEnabled == FALSE) {
+	} else if (psAdapter->bIsAutoCorrectEnabled == false) {
 		/* remove the autocorrect disable bit set before dumping. */
 		psAdapter->ulPowerSaveMode &= ~(1 << 3);
 		psAdapter->pstargetparams->HostDrvrConfig6 &= ~(htonl(1 << 15));
@@ -1302,8 +1302,8 @@
 		wake_up(&Adapter->LEDInfo.notify_led_event);
 	}
 
-	Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
-	Adapter->bShutStatus = FALSE;
+	Adapter->bTriedToWakeUpFromlowPowerMode = false;
+	Adapter->bShutStatus = false;
 	wake_up(&Adapter->lowpower_mode_wait_queue);
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "<====\n");
 }
@@ -1341,7 +1341,7 @@
 
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "Device Access is going on NACK the Shut Down MODE\n");
 		stShutdownResponse.szData[2] = SHUTDOWN_NACK_FROM_DRIVER; /* NACK- device access is going on. */
-		Adapter->bPreparingForLowPowerMode = FALSE;
+		Adapter->bPreparingForLowPowerMode = false;
 	} else {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "Sending SHUTDOWN MODE ACK\n");
 		stShutdownResponse.szData[2] = SHUTDOWN_ACK_FROM_DRIVER; /* ShutDown ACK */
@@ -1374,7 +1374,7 @@
 			if (Adapter->bDoSuspend == TRUE)
 				Bcm_kill_all_URBs((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
 		} else {
-			Adapter->bPreparingForLowPowerMode = FALSE;
+			Adapter->bPreparingForLowPowerMode = false;
 		}
 
 		if (!NVMAccess)
@@ -1387,7 +1387,7 @@
 	Status = CopyBufferToControlPacket(Adapter, &stShutdownResponse);
 	if ((Status != STATUS_SUCCESS)) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "fail to send the Idle mode Request\n");
-		Adapter->bPreparingForLowPowerMode = FALSE;
+		Adapter->bPreparingForLowPowerMode = false;
 		StartInterruptUrb((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
 	}
 }
@@ -1430,11 +1430,11 @@
 	Adapter->LinkStatus = 0;
 	atomic_set(&Adapter->cntrlpktCnt, 0);
 	atomic_set(&Adapter->TotalPacketCount, 0);
-	Adapter->fw_download_done = FALSE;
+	Adapter->fw_download_done = false;
 	Adapter->LinkStatus = 0;
-	Adapter->AutoLinkUp = FALSE;
-	Adapter->IdleMode = FALSE;
-	Adapter->bShutStatus = FALSE;
+	Adapter->AutoLinkUp = false;
+	Adapter->IdleMode = false;
+	Adapter->bShutStatus = false;
 }
 
 struct bcm_classifier_rule *GetFragIPClsEntry(struct bcm_mini_adapter *Adapter, USHORT usIpIdentification, ULONG SrcIP)
@@ -1521,7 +1521,7 @@
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Invalid VCID : %x\n", Adapter->PackInfo[iIndex].usVCID_Value);
 		}
 	}
-	atomic_set(&Adapter->uiMBupdate, FALSE);
+	atomic_set(&Adapter->uiMBupdate, false);
 }
 
 void flush_queue(struct bcm_mini_adapter *Adapter, unsigned int iQIndex)
@@ -1557,8 +1557,8 @@
 	netif_carrier_off(Adapter->dev);
 	netif_stop_queue(Adapter->dev);
 
-	Adapter->IdleMode = FALSE;
-	Adapter->LinkUpStatus = FALSE;
+	Adapter->IdleMode = false;
+	Adapter->LinkUpStatus = false;
 	ClearTargetDSXBuffer(Adapter, 0, TRUE);
 	/* Delete All Classifier Rules */
 
@@ -1568,7 +1568,7 @@
 	flush_all_queues(Adapter);
 
 	if (Adapter->TimerActive == TRUE)
-		Adapter->TimerActive = FALSE;
+		Adapter->TimerActive = false;
 
 	memset(Adapter->astFragmentedPktClassifierTable, 0, sizeof(struct bcm_fragmented_packet_info) * MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES);
 
diff --git a/drivers/staging/bcm/PHSModule.c b/drivers/staging/bcm/PHSModule.c
index af5d22f..892ebc6 100644
--- a/drivers/staging/bcm/PHSModule.c
+++ b/drivers/staging/bcm/PHSModule.c
@@ -8,9 +8,9 @@
 
 static UINT UpdateClassifierPHSRule(B_UINT16 uiClsId, struct bcm_phs_classifier_entry *pstClassifierEntry, struct bcm_phs_classifier_table *psaClassifiertable, struct bcm_phs_rule *psPhsRule, B_UINT8 u8AssociatedPHSI);
 
-static BOOLEAN ValidatePHSRuleComplete(struct bcm_phs_rule *psPhsRule);
+static bool ValidatePHSRuleComplete(struct bcm_phs_rule *psPhsRule);
 
-static BOOLEAN DerefPhsRule(B_UINT16 uiClsId, struct bcm_phs_classifier_table *psaClassifiertable, struct bcm_phs_rule *pstPhsRule);
+static bool DerefPhsRule(B_UINT16 uiClsId, struct bcm_phs_classifier_table *psaClassifiertable, struct bcm_phs_rule *pstPhsRule);
 
 static UINT GetClassifierEntry(struct bcm_phs_classifier_table *pstClassifierTable, B_UINT32 uiClsid, enum bcm_phs_classifier_context eClsContext, struct bcm_phs_classifier_entry **ppstClassifierEntry);
 
@@ -67,7 +67,7 @@
 		struct sk_buff **pPacket,
 		USHORT Vcid,
 		B_UINT16 uiClassifierRuleID,
-		BOOLEAN bHeaderSuppressionEnabled,
+		bool bHeaderSuppressionEnabled,
 		UINT *PacketLen,
 		UCHAR bEthCSSupport)
 {
@@ -81,7 +81,7 @@
 	PUCHAR pucPHSPktHdrOutBuf = Adapter->stPhsTxContextInfo.ucaHdrSuppressionOutBuf;
 	UINT usPacketType;
 	UINT BytesToRemove = 0;
-	BOOLEAN bPHSI = 0;
+	bool bPHSI = 0;
 	LONG ulPhsStatus = 0;
 	UINT numBytesCompressed = 0;
 	struct sk_buff *newPacket = NULL;
@@ -569,7 +569,7 @@
 				memset(&pstClassifierRulesTable->stOldPhsRulesList[nClsidIndex], 0, sizeof(struct bcm_phs_classifier_entry));
 			}
 		}
-		pstServiceFlowEntry->bUsed = FALSE;
+		pstServiceFlowEntry->bUsed = false;
 		pstServiceFlowEntry->uiVcid = 0;
 	}
 
@@ -596,7 +596,7 @@
  * 0 if successful,
  * >0 Error.
  */
-ULONG PhsCompress(IN void *pvContext,
+static ULONG PhsCompress(IN void *pvContext,
 		IN B_UINT16 uiVcid,
 		IN B_UINT16 uiClsId,
 		IN void *pvInputBuffer,
@@ -677,7 +677,7 @@
  * 0 if successful,
  * >0 Error.
  */
-ULONG PhsDeCompress(IN void *pvContext,
+static ULONG PhsDeCompress(IN void *pvContext,
 		IN B_UINT16 uiVcid,
 		IN void *pvInputBuffer,
 		OUT void *pvOutputBuffer,
@@ -788,26 +788,26 @@
 	psServiceFlowRulesTable = NULL;
 }
 
-static BOOLEAN ValidatePHSRuleComplete(IN struct bcm_phs_rule *psPhsRule)
+static bool ValidatePHSRuleComplete(IN struct bcm_phs_rule *psPhsRule)
 {
 	if (psPhsRule) {
 		if (!psPhsRule->u8PHSI) {
 			/* PHSI is not valid */
-			return FALSE;
+			return false;
 		}
 
 		if (!psPhsRule->u8PHSS) {
 			/* PHSS Is Undefined */
-			return FALSE;
+			return false;
 		}
 
 		/* Check if PHSF is defines for the PHS Rule */
 		if (!psPhsRule->u8PHSFLength) /* If any part of PHSF is valid then Rule contains valid PHSF */
-			return FALSE;
+			return false;
 
 		return TRUE;
 	} else
-		return FALSE;
+		return false;
 }
 
 UINT GetServiceFlowEntry(IN struct bcm_phs_table *psServiceFlowTable,
@@ -829,7 +829,7 @@
 	return PHS_INVALID_TABLE_INDEX;
 }
 
-UINT GetClassifierEntry(IN struct bcm_phs_classifier_table *pstClassifierTable,
+static UINT GetClassifierEntry(IN struct bcm_phs_classifier_table *pstClassifierTable,
 			IN B_UINT32 uiClsid, enum bcm_phs_classifier_context eClsContext,
 			OUT struct bcm_phs_classifier_entry **ppstClassifierEntry)
 {
@@ -880,7 +880,7 @@
 	return PHS_INVALID_TABLE_INDEX;
 }
 
-UINT CreateSFToClassifierRuleMapping(IN B_UINT16 uiVcid, IN B_UINT16  uiClsId,
+static UINT CreateSFToClassifierRuleMapping(IN B_UINT16 uiVcid, IN B_UINT16  uiClsId,
 				IN struct bcm_phs_table *psServiceFlowTable,
 				struct bcm_phs_rule *psPhsRule,
 				B_UINT8 u8AssociatedPHSI)
@@ -888,7 +888,7 @@
 	struct bcm_phs_classifier_table *psaClassifiertable = NULL;
 	UINT uiStatus = 0;
 	int iSfIndex;
-	BOOLEAN bFreeEntryFound = FALSE;
+	bool bFreeEntryFound = false;
 
 	/* Check for a free entry in SFID table */
 	for (iSfIndex = 0; iSfIndex < MAX_SERVICEFLOWS; iSfIndex++) {
@@ -913,7 +913,7 @@
 	return uiStatus;
 }
 
-UINT CreateClassiferToPHSRuleMapping(IN B_UINT16 uiVcid,
+static UINT CreateClassiferToPHSRuleMapping(IN B_UINT16 uiVcid,
 				IN B_UINT16 uiClsId,
 				IN struct bcm_phs_entry *pstServiceFlowEntry,
 				struct bcm_phs_rule *psPhsRule,
@@ -1009,7 +1009,7 @@
 				B_UINT8 u8AssociatedPHSI)
 {
 	UINT iClassifierIndex = 0;
-	BOOLEAN bFreeEntryFound = FALSE;
+	bool bFreeEntryFound = false;
 	struct bcm_phs_classifier_entry *psClassifierRules = NULL;
 	UINT nStatus = PHS_SUCCESS;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -1102,7 +1102,7 @@
 {
 	struct bcm_phs_rule *pstAddPhsRule = NULL;
 	UINT nPhsRuleIndex = 0;
-	BOOLEAN bPHSRuleOrphaned = FALSE;
+	bool bPHSRuleOrphaned = false;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
 
 	psPhsRule->u8RefCnt = 0;
@@ -1124,7 +1124,7 @@
 		}
 
 		/* Step 2.a PHS Rule Does Not Exist .Create New PHS Rule for uiClsId */
-		if (FALSE == bPHSRuleOrphaned) {
+		if (false == bPHSRuleOrphaned) {
 
 			pstClassifierEntry->pstPhsRule = kmalloc(sizeof(struct bcm_phs_rule), GFP_KERNEL);
 			if (NULL == pstClassifierEntry->pstPhsRule)
@@ -1150,10 +1150,10 @@
 	return PHS_SUCCESS;
 }
 
-static BOOLEAN DerefPhsRule(IN B_UINT16  uiClsId, struct bcm_phs_classifier_table *psaClassifiertable, struct bcm_phs_rule *pstPhsRule)
+static bool DerefPhsRule(IN B_UINT16  uiClsId, struct bcm_phs_classifier_table *psaClassifiertable, struct bcm_phs_rule *pstPhsRule)
 {
 	if (pstPhsRule == NULL)
-		return FALSE;
+		return false;
 
 	if (pstPhsRule->u8RefCnt)
 		pstPhsRule->u8RefCnt--;
@@ -1166,7 +1166,7 @@
 		 */
 		return TRUE;
 	} else
-		return FALSE;
+		return false;
 }
 
 void DumpPhsRules(struct bcm_phs_extension *pDeviceExtension)
@@ -1239,7 +1239,7 @@
  *			header.
  *	0	-If PHS rule is NULL.If PHSI is 0 indicateing packet as uncompressed.
  */
-int phs_decompress(unsigned char *in_buf,
+static int phs_decompress(unsigned char *in_buf,
 		unsigned char *out_buf,
 		struct bcm_phs_rule *decomp_phs_rules,
 		UINT *header_size)
diff --git a/drivers/staging/bcm/PHSModule.h b/drivers/staging/bcm/PHSModule.h
index 82d8682..d697f9c 100644
--- a/drivers/staging/bcm/PHSModule.h
+++ b/drivers/staging/bcm/PHSModule.h
@@ -5,7 +5,7 @@
 					struct sk_buff **pPacket,
 					 USHORT Vcid,
 					 B_UINT16 uiClassifierRuleID,
-					 BOOLEAN bHeaderSuppressionEnabled,
+					 bool bHeaderSuppressionEnabled,
 					 PUINT PacketLen,
 					 UCHAR bEthCSSupport);
 
@@ -39,7 +39,7 @@
 ULONG PhsDeleteSFRules(void* pvContext,B_UINT16 uiVcid) ;
 
 
-BOOLEAN ValidatePHSRule(struct bcm_phs_rule *psPhsRule);
+bool ValidatePHSRule(struct bcm_phs_rule *psPhsRule);
 
 UINT GetServiceFlowEntry(struct bcm_phs_table *psServiceFlowTable,B_UINT16 uiVcid, struct bcm_phs_entry **ppstServiceFlowEntry);
 
diff --git a/drivers/staging/bcm/Prototypes.h b/drivers/staging/bcm/Prototypes.h
index 2a673b1..fb53a00 100644
--- a/drivers/staging/bcm/Prototypes.h
+++ b/drivers/staging/bcm/Prototypes.h
@@ -111,7 +111,7 @@
 
 void update_per_sf_desc_cnts( struct bcm_mini_adapter *Adapter);
 
-void ClearTargetDSXBuffer(struct bcm_mini_adapter *Adapter,B_UINT16 TID,BOOLEAN bFreeAll);
+void ClearTargetDSXBuffer(struct bcm_mini_adapter *Adapter,B_UINT16 TID,bool bFreeAll);
 
 
 void flush_queue(struct bcm_mini_adapter *Adapter, UINT iQIndex);
@@ -138,7 +138,7 @@
 	PUCHAR pBuffer,
 	UINT uiOffset,
 	UINT uiNumBytes,
-	BOOLEAN bVerify);
+	bool bVerify);
 
 
 INT ReadBeceemEEPROM(struct bcm_mini_adapter *Adapter,UINT dwAddress, UINT *pdwData);
@@ -155,13 +155,13 @@
 	PUINT pBuffer,
 	UINT uiOffset,
 	UINT uiNumBytes,
-	BOOLEAN bVerify);
+	bool bVerify);
 
 
 INT BcmInitNVM(struct bcm_mini_adapter *Adapter);
 
 INT BcmUpdateSectorSize(struct bcm_mini_adapter *Adapter,UINT uiSectorSize);
-BOOLEAN IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section);
+bool IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section);
 
 INT BcmGetFlash2xSectionalBitMap(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_bitmap *psFlash2xBitMap);
 
@@ -198,7 +198,7 @@
 						UINT numOfBytes);
 
 
-BOOLEAN IsNonCDLessDevice(struct bcm_mini_adapter *Adapter);
+bool IsNonCDLessDevice(struct bcm_mini_adapter *Adapter);
 
 
 VOID OverrideServiceFlowParams(struct bcm_mini_adapter *Adapter,PUINT puiBuffer);
@@ -212,7 +212,7 @@
 
 
 VOID putUsbSuspend(struct work_struct *work);
-BOOLEAN IsReqGpioIsLedInNVM(struct bcm_mini_adapter *Adapter, UINT gpios);
+bool IsReqGpioIsLedInNVM(struct bcm_mini_adapter *Adapter, UINT gpios);
 
 
 #endif
diff --git a/drivers/staging/bcm/Qos.c b/drivers/staging/bcm/Qos.c
index 2d4a77c..1609a2b 100644
--- a/drivers/staging/bcm/Qos.c
+++ b/drivers/staging/bcm/Qos.c
@@ -5,7 +5,7 @@
 #include "headers.h"
 
 static void EThCSGetPktInfo(struct bcm_mini_adapter *Adapter, PVOID pvEthPayload, struct bcm_eth_packet_info *pstEthCsPktInfo);
-static BOOLEAN EThCSClassifyPkt(struct bcm_mini_adapter *Adapter, struct sk_buff* skb, struct bcm_eth_packet_info *pstEthCsPktInfo, struct bcm_classifier_rule *pstClassifierRule, B_UINT8 EthCSCupport);
+static bool EThCSClassifyPkt(struct bcm_mini_adapter *Adapter, struct sk_buff* skb, struct bcm_eth_packet_info *pstEthCsPktInfo, struct bcm_classifier_rule *pstClassifierRule, B_UINT8 EthCSCupport);
 
 static USHORT	IpVersion4(struct bcm_mini_adapter *Adapter, struct iphdr *iphd,
 			   struct bcm_classifier_rule *pstClassifierRule);
@@ -24,7 +24,7 @@
 *
 * Returns     - TRUE(If address matches) else FAIL .
 *********************************************************************/
-BOOLEAN MatchSrcIpAddress(struct bcm_classifier_rule *pstClassifierRule, ULONG ulSrcIP)
+bool MatchSrcIpAddress(struct bcm_classifier_rule *pstClassifierRule, ULONG ulSrcIP)
 {
 	UCHAR ucLoopIndex = 0;
 
@@ -43,7 +43,7 @@
 		}
 	}
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Src Ip Address Not Matched");
-	return FALSE;
+	return false;
 }
 
 
@@ -58,7 +58,7 @@
 *
 * Returns     - TRUE(If address matches) else FAIL .
 *********************************************************************/
-BOOLEAN MatchDestIpAddress(struct bcm_classifier_rule *pstClassifierRule, ULONG ulDestIP)
+bool MatchDestIpAddress(struct bcm_classifier_rule *pstClassifierRule, ULONG ulDestIP)
 {
 	UCHAR ucLoopIndex = 0;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -77,7 +77,7 @@
 		}
 	}
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Destination Ip Address Not Matched");
-	return FALSE;
+	return false;
 }
 
 
@@ -91,7 +91,7 @@
 *
 * Returns     - TRUE(If address matches) else FAIL.
 **************************************************************************/
-BOOLEAN MatchTos(struct bcm_classifier_rule *pstClassifierRule, UCHAR ucTypeOfService)
+bool MatchTos(struct bcm_classifier_rule *pstClassifierRule, UCHAR ucTypeOfService)
 {
 
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -103,7 +103,7 @@
 		return TRUE;
 	}
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Type Of Service Not Matched");
-	return FALSE;
+	return false;
 }
 
 
@@ -132,7 +132,7 @@
 		}
 	}
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Protocol Not Matched");
-	return FALSE;
+	return false;
 }
 
 
@@ -164,7 +164,7 @@
 		}
 	}
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Src Port: %x Not Matched ", ushSrcPort);
-	return FALSE;
+	return false;
 }
 
 
@@ -197,7 +197,7 @@
 		}
 	}
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Dest Port: %x Not Matched", ushDestPort);
-	return FALSE;
+	return false;
 }
 /**
 @ingroup tx_functions
@@ -209,7 +209,7 @@
 			   struct bcm_classifier_rule *pstClassifierRule)
 {
 	struct bcm_transport_header *xprt_hdr = NULL;
-	BOOLEAN	bClassificationSucceed = FALSE;
+	bool	bClassificationSucceed = false;
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "========>");
 
@@ -223,7 +223,7 @@
 		//Checking classifier validity
 		if (!pstClassifierRule->bUsed || pstClassifierRule->ucDirection == DOWNLINK_DIR)
 		{
-			bClassificationSucceed = FALSE;
+			bClassificationSucceed = false;
 			break;
 		}
 
@@ -233,17 +233,17 @@
 
 		//**************Checking IP header parameter**************************//
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Trying to match Source IP Address");
-		if (FALSE == (bClassificationSucceed =
+		if (false == (bClassificationSucceed =
 			MatchSrcIpAddress(pstClassifierRule, iphd->saddr)))
 			break;
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Source IP Address Matched");
 
-		if (FALSE == (bClassificationSucceed =
+		if (false == (bClassificationSucceed =
 			MatchDestIpAddress(pstClassifierRule, iphd->daddr)))
 			break;
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Destination IP Address Matched");
 
-		if (FALSE == (bClassificationSucceed =
+		if (false == (bClassificationSucceed =
 			MatchTos(pstClassifierRule, iphd->tos)))
 		{
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "TOS Match failed\n");
@@ -251,7 +251,7 @@
 		}
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "TOS Matched");
 
-		if (FALSE == (bClassificationSucceed =
+		if (false == (bClassificationSucceed =
 			MatchProtocol(pstClassifierRule, iphd->protocol)))
 			break;
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Protocol Matched");
@@ -263,7 +263,7 @@
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Source Port %04x",
 			(iphd->protocol == UDP) ? xprt_hdr->uhdr.source : xprt_hdr->thdr.source);
 
-		if (FALSE == (bClassificationSucceed =
+		if (false == (bClassificationSucceed =
 			MatchSrcPort(pstClassifierRule,
 				ntohs((iphd->protocol == UDP) ?
 				xprt_hdr->uhdr.source : xprt_hdr->thdr.source))))
@@ -273,7 +273,7 @@
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Destination Port %04x",
 			(iphd->protocol == UDP) ? xprt_hdr->uhdr.dest :
 			xprt_hdr->thdr.dest);
-		if (FALSE == (bClassificationSucceed =
+		if (false == (bClassificationSucceed =
 			MatchDestPort(pstClassifierRule,
 			ntohs((iphd->protocol == UDP) ?
 			xprt_hdr->uhdr.dest : xprt_hdr->thdr.dest))))
@@ -286,13 +286,13 @@
 		iMatchedSFQueueIndex = SearchSfid(Adapter, pstClassifierRule->ulSFID);
 		if (iMatchedSFQueueIndex >= NO_OF_QUEUES)
 		{
-			bClassificationSucceed = FALSE;
+			bClassificationSucceed = false;
 		}
 		else
 		{
-			if (FALSE == Adapter->PackInfo[iMatchedSFQueueIndex].bActive)
+			if (false == Adapter->PackInfo[iMatchedSFQueueIndex].bActive)
 			{
-				bClassificationSucceed = FALSE;
+				bClassificationSucceed = false;
 			}
 		}
 	}
@@ -451,7 +451,7 @@
 	struct iphdr *pIpHeader = NULL;
 	INT	  uiSfIndex = 0;
 	USHORT	usIndex = Adapter->usBestEffortQueueIndex;
-	BOOLEAN	bFragmentedPkt = FALSE, bClassificationSucceed = FALSE;
+	bool	bFragmentedPkt = false, bClassificationSucceed = false;
 	USHORT	usCurrFragment = 0;
 
 	struct bcm_tcp_header *pTcpHeader;
@@ -529,16 +529,16 @@
 		//to classify the packet until match found
 		do
 		{
-			if (FALSE == Adapter->astClassifierTable[uiLoopIndex].bUsed)
+			if (false == Adapter->astClassifierTable[uiLoopIndex].bUsed)
 			{
-				bClassificationSucceed = FALSE;
+				bClassificationSucceed = false;
 				break;
 			}
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "Adapter->PackInfo[%d].bvalid=True\n", uiLoopIndex);
 
 			if (0 == Adapter->astClassifierTable[uiLoopIndex].ucDirection)
 			{
-				bClassificationSucceed = FALSE;//cannot be processed for classification.
+				bClassificationSucceed = false;//cannot be processed for classification.
 				break;						// it is a down link connection
 			}
 
@@ -556,7 +556,7 @@
 				if (eEthUnsupportedFrame == stEthCsPktInfo.eNwpktEthFrameType)
 				{
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, " ClassifyPacket : Packet Not a Valid Supported Ethernet Frame\n");
-					bClassificationSucceed = FALSE;
+					bClassificationSucceed = false;
 					break;
 				}
 
@@ -577,7 +577,7 @@
 				if (eEthOtherFrame != stEthCsPktInfo.eNwpktEthFrameType)
 				{
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, " ClassifyPacket : Packet Not a 802.3 Ethernet Frame... hence not allowed over non-ETH CS SF\n");
-					bClassificationSucceed = FALSE;
+					bClassificationSucceed = false;
 					break;
 				}
 			}
@@ -590,7 +590,7 @@
 				if (stEthCsPktInfo.eNwpktIPFrameType == eNonIPPacket)
 				{
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, " ClassifyPacket : Packet is Not an IP Packet\n");
-					bClassificationSucceed = FALSE;
+					bClassificationSucceed = false;
 					break;
 				}
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Dump IP Header :\n");
@@ -636,7 +636,7 @@
 			stFragPktInfo.ulSrcIpAddress = pIpHeader->saddr;
 			stFragPktInfo.usIpIdentification = pIpHeader->id;
 			stFragPktInfo.pstMatchedClassifierEntry = pstClassifierRule;
-			stFragPktInfo.bOutOfOrderFragment = FALSE;
+			stFragPktInfo.bOutOfOrderFragment = false;
 			AddFragIPClsEntry(Adapter, &stFragPktInfo);
 		}
 
@@ -649,7 +649,7 @@
 		return INVALID_QUEUE_INDEX;
 }
 
-static BOOLEAN EthCSMatchSrcMACAddress(struct bcm_classifier_rule *pstClassifierRule, PUCHAR Mac)
+static bool EthCSMatchSrcMACAddress(struct bcm_classifier_rule *pstClassifierRule, PUCHAR Mac)
 {
 	UINT i = 0;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -661,12 +661,12 @@
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "SRC MAC[%x] = %x ClassifierRuleSrcMAC = %x Mask : %x\n", i, Mac[i], pstClassifierRule->au8EThCSSrcMAC[i], pstClassifierRule->au8EThCSSrcMACMask[i]);
 		if ((pstClassifierRule->au8EThCSSrcMAC[i] & pstClassifierRule->au8EThCSSrcMACMask[i]) !=
 			(Mac[i] & pstClassifierRule->au8EThCSSrcMACMask[i]))
-			return FALSE;
+			return false;
 	}
 	return TRUE;
 }
 
-static BOOLEAN EthCSMatchDestMACAddress(struct bcm_classifier_rule *pstClassifierRule, PUCHAR Mac)
+static bool EthCSMatchDestMACAddress(struct bcm_classifier_rule *pstClassifierRule, PUCHAR Mac)
 {
 	UINT i = 0;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -678,12 +678,12 @@
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "SRC MAC[%x] = %x ClassifierRuleSrcMAC = %x Mask : %x\n", i, Mac[i], pstClassifierRule->au8EThCSDestMAC[i], pstClassifierRule->au8EThCSDestMACMask[i]);
 		if ((pstClassifierRule->au8EThCSDestMAC[i] & pstClassifierRule->au8EThCSDestMACMask[i]) !=
 			(Mac[i] & pstClassifierRule->au8EThCSDestMACMask[i]))
-			return FALSE;
+			return false;
 	}
 	return TRUE;
 }
 
-static BOOLEAN EthCSMatchEThTypeSAP(struct bcm_classifier_rule *pstClassifierRule, struct sk_buff* skb, struct bcm_eth_packet_info *pstEthCsPktInfo)
+static bool EthCSMatchEThTypeSAP(struct bcm_classifier_rule *pstClassifierRule, struct sk_buff* skb, struct bcm_eth_packet_info *pstEthCsPktInfo)
 {
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	if ((pstClassifierRule->ucEtherTypeLen == 0) ||
@@ -698,29 +698,29 @@
 		if (memcmp(&pstEthCsPktInfo->usEtherType, &pstClassifierRule->au8EthCSEtherType[1], 2) == 0)
 			return TRUE;
 		else
-			return FALSE;
+			return false;
 	}
 
 	if (pstClassifierRule->au8EthCSEtherType[0] == 2)
 	{
 		if (eEth802LLCFrame != pstEthCsPktInfo->eNwpktEthFrameType)
-			return FALSE;
+			return false;
 
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "%s  EthCS DSAP:%x EtherType[2]:%x\n", __FUNCTION__, pstEthCsPktInfo->ucDSAP, pstClassifierRule->au8EthCSEtherType[2]);
 		if (pstEthCsPktInfo->ucDSAP == pstClassifierRule->au8EthCSEtherType[2])
 			return TRUE;
 		else
-			return FALSE;
+			return false;
 
 	}
 
-	return FALSE;
+	return false;
 
 }
 
-static BOOLEAN EthCSMatchVLANRules(struct bcm_classifier_rule *pstClassifierRule, struct sk_buff* skb, struct bcm_eth_packet_info *pstEthCsPktInfo)
+static bool EthCSMatchVLANRules(struct bcm_classifier_rule *pstClassifierRule, struct sk_buff* skb, struct bcm_eth_packet_info *pstEthCsPktInfo)
 {
-	BOOLEAN bClassificationSucceed = FALSE;
+	bool bClassificationSucceed = false;
 	USHORT usVLANID;
 	B_UINT8 uPriority = 0;
 	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
@@ -731,7 +731,7 @@
 	if (pstClassifierRule->usValidityBitMap & (1<<PKT_CLASSIFICATION_USER_PRIORITY_VALID))
 	{
 		if (pstEthCsPktInfo->eNwpktEthFrameType != eEth802QVLANFrame)
-				return FALSE;
+				return false;
 
 		uPriority = (ntohs(*(USHORT *)(skb->data + sizeof(struct bcm_eth_header))) & 0xF000) >> 13;
 
@@ -739,17 +739,17 @@
 				bClassificationSucceed = TRUE;
 
 		if (!bClassificationSucceed)
-			return FALSE;
+			return false;
 	}
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "ETH CS 802.1 D  User Priority Rule Matched\n");
 
-	bClassificationSucceed = FALSE;
+	bClassificationSucceed = false;
 
 	if (pstClassifierRule->usValidityBitMap & (1<<PKT_CLASSIFICATION_VLANID_VALID))
 	{
 		if (pstEthCsPktInfo->eNwpktEthFrameType != eEth802QVLANFrame)
-				return FALSE;
+				return false;
 
 		usVLANID = ntohs(*(USHORT *)(skb->data + sizeof(struct bcm_eth_header))) & 0xFFF;
 
@@ -759,7 +759,7 @@
 			bClassificationSucceed = TRUE;
 
 		if (!bClassificationSucceed)
-			return FALSE;
+			return false;
 	}
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "ETH CS 802.1 Q VLAN ID Rule Matched\n");
@@ -768,26 +768,26 @@
 }
 
 
-static BOOLEAN EThCSClassifyPkt(struct bcm_mini_adapter *Adapter, struct sk_buff* skb,
+static bool EThCSClassifyPkt(struct bcm_mini_adapter *Adapter, struct sk_buff* skb,
 				struct bcm_eth_packet_info *pstEthCsPktInfo,
 				struct bcm_classifier_rule *pstClassifierRule,
 				B_UINT8 EthCSCupport)
 {
-	BOOLEAN bClassificationSucceed = FALSE;
+	bool bClassificationSucceed = false;
 	bClassificationSucceed = EthCSMatchSrcMACAddress(pstClassifierRule, ((struct bcm_eth_header *)(skb->data))->au8SourceAddress);
 	if (!bClassificationSucceed)
-		return FALSE;
+		return false;
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "ETH CS SrcMAC Matched\n");
 
 	bClassificationSucceed = EthCSMatchDestMACAddress(pstClassifierRule, ((struct bcm_eth_header *)(skb->data))->au8DestinationAddress);
 	if (!bClassificationSucceed)
-		return FALSE;
+		return false;
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "ETH CS DestMAC Matched\n");
 
 	//classify on ETHType/802.2SAP TLV
 	bClassificationSucceed = EthCSMatchEThTypeSAP(pstClassifierRule, skb, pstEthCsPktInfo);
 	if (!bClassificationSucceed)
-		return FALSE;
+		return false;
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "ETH CS EthType/802.2SAP Matched\n");
 
@@ -795,7 +795,7 @@
 
 	bClassificationSucceed = EthCSMatchVLANRules(pstClassifierRule, skb, pstEthCsPktInfo);
 	if (!bClassificationSucceed)
-		return FALSE;
+		return false;
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "ETH CS 802.1 VLAN Rules Matched\n");
 
 	return bClassificationSucceed;
diff --git a/drivers/staging/bcm/Transmit.c b/drivers/staging/bcm/Transmit.c
index f8dc3e2..2ed4836 100644
--- a/drivers/staging/bcm/Transmit.c
+++ b/drivers/staging/bcm/Transmit.c
@@ -84,7 +84,7 @@
 int SetupNextSend(struct bcm_mini_adapter *Adapter,  struct sk_buff *Packet, USHORT Vcid)
 {
 	int	status = 0;
-	BOOLEAN	bHeaderSupressionEnabled = FALSE;
+	bool	bHeaderSupressionEnabled = false;
 	B_UINT16 uiClassifierRuleID;
 	u16	QueueIndex = skb_get_queue_mapping(Packet);
 	struct bcm_leader Leader = {0};
@@ -204,7 +204,7 @@
 		/* Check end point for halt/stall. */
 		if (Adapter->bEndPointHalted == TRUE) {
 			Bcm_clear_halt_of_endpoints(Adapter);
-			Adapter->bEndPointHalted = FALSE;
+			Adapter->bEndPointHalted = false;
 			StartInterruptUrb((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter));
 		}
 
diff --git a/drivers/staging/bcm/Typedefs.h b/drivers/staging/bcm/Typedefs.h
index a985abf..832adcf 100644
--- a/drivers/staging/bcm/Typedefs.h
+++ b/drivers/staging/bcm/Typedefs.h
@@ -6,10 +6,10 @@
 #define  STATUS_SUCCESS	0
 #define  STATUS_FAILURE -1
 
-#define	 FALSE		0
+
 #define	 TRUE		1
 
-typedef char BOOLEAN;
+
 typedef char CHAR;
 typedef int INT;
 typedef short SHORT;
diff --git a/drivers/staging/bcm/led_control.c b/drivers/staging/bcm/led_control.c
index 05a948a..eee4f47 100644
--- a/drivers/staging/bcm/led_control.c
+++ b/drivers/staging/bcm/led_control.c
@@ -13,12 +13,12 @@
 	return u16CheckSum;
 }
 
-BOOLEAN IsReqGpioIsLedInNVM(struct bcm_mini_adapter *Adapter, UINT gpios)
+bool IsReqGpioIsLedInNVM(struct bcm_mini_adapter *Adapter, UINT gpios)
 {
 	INT Status;
 	Status = (Adapter->gpioBitMap & gpios) ^ gpios;
 	if (Status)
-		return FALSE;
+		return false;
 	else
 		return TRUE;
 }
@@ -27,7 +27,7 @@
 		ULONG timeout, INT num_of_time, enum bcm_led_events currdriverstate)
 {
 	int Status = STATUS_SUCCESS;
-	BOOLEAN bInfinite = FALSE;
+	bool bInfinite = false;
 
 	/* Check if num_of_time is -ve. If yes, blink led in infinite loop */
 	if (num_of_time < 0) {
@@ -67,7 +67,7 @@
 				currdriverstate != Adapter->DriverState ||
 					kthread_should_stop(),
 				msecs_to_jiffies(timeout));
-		if (bInfinite == FALSE)
+		if (bInfinite == false)
 			num_of_time--;
 	}
 	return Status;
@@ -108,7 +108,7 @@
 	int Status = STATUS_SUCCESS;
 	INT num_of_time = 0, num_of_time_tx = 0, num_of_time_rx = 0;
 	UINT remDelay = 0;
-	BOOLEAN bBlinkBothLED = TRUE;
+	bool bBlinkBothLED = TRUE;
 	/* UINT GPIO_num = DISABLE_GPIO_NUM; */
 	ulong timeout = 0;
 
@@ -120,7 +120,7 @@
 	num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx);
 	num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx);
 
-	while ((Adapter->device_removed == FALSE)) {
+	while ((Adapter->device_removed == false)) {
 		timeout = 50;
 		/*
 		 * Blink Tx and Rx LED when both Tx and Rx is
@@ -478,7 +478,7 @@
 
 
 static int ReadConfigFileStructure(struct bcm_mini_adapter *Adapter,
-					BOOLEAN *bEnableThread)
+					bool *bEnableThread)
 {
 	int Status = STATUS_SUCCESS;
 	/* Array to store GPIO numbers from EEPROM */
@@ -499,10 +499,10 @@
 	/* Read the GPIO numbers from EEPROM */
 	Status = ReadLEDInformationFromEEPROM(Adapter, GPIO_Array);
 	if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH) {
-		*bEnableThread = FALSE;
+		*bEnableThread = false;
 		return STATUS_SUCCESS;
 	} else if (Status) {
-		*bEnableThread = FALSE;
+		*bEnableThread = false;
 		return Status;
 	}
 
@@ -561,7 +561,7 @@
 			uiNum_of_LED_Type++;
 	}
 	if (uiNum_of_LED_Type >= NUM_OF_LEDS)
-		*bEnableThread = FALSE;
+		*bEnableThread = false;
 
 	return Status;
 }
@@ -602,7 +602,7 @@
 		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
 			DBG_LVL_ALL, "LED Thread: WRM Failed\n");
 
-	Adapter->LEDInfo.bIdle_led_off = FALSE;
+	Adapter->LEDInfo.bIdle_led_off = false;
 }
 
 static INT BcmGetGPIOPinInfo(struct bcm_mini_adapter *Adapter, UCHAR *GPIO_num_tx,
@@ -660,7 +660,7 @@
 	UCHAR dummyIndex = 0;
 
 	/* currdriverstate = Adapter->DriverState; */
-	Adapter->LEDInfo.bIdleMode_tx_from_host = FALSE;
+	Adapter->LEDInfo.bIdleMode_tx_from_host = false;
 
 	/*
 	 * Wait till event is triggered
@@ -698,7 +698,7 @@
 		if (GPIO_num != DISABLE_GPIO_NUM)
 			TURN_OFF_LED(1 << GPIO_num, uiLedIndex);
 
-		if (Adapter->LEDInfo.bLedInitDone == FALSE) {
+		if (Adapter->LEDInfo.bLedInitDone == false) {
 			LedGpioInit(Adapter);
 			Adapter->LEDInfo.bLedInitDone = TRUE;
 		}
@@ -757,7 +757,7 @@
 				UCHAR uiLEDTx = 0;
 				UCHAR uiLEDRx = 0;
 				currdriverstate = NORMAL_OPERATION;
-				Adapter->LEDInfo.bIdle_led_off = FALSE;
+				Adapter->LEDInfo.bIdle_led_off = false;
 
 				BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx,
 					&GPIO_num_rx, &uiLEDTx, &uiLEDRx,
@@ -803,7 +803,7 @@
 
 			}
 			/* Turn off LED And WAKE-UP for Sendinf IDLE mode ACK */
-			Adapter->LEDInfo.bLedInitDone = FALSE;
+			Adapter->LEDInfo.bLedInitDone = false;
 			Adapter->LEDInfo.bIdle_led_off = TRUE;
 			wake_up(&Adapter->LEDInfo.idleModeSyncEvent);
 			GPIO_num = DISABLE_GPIO_NUM;
@@ -830,7 +830,7 @@
 			currdriverstate = LED_THREAD_INACTIVE;
 			Adapter->LEDInfo.led_thread_running =
 					BCM_LED_THREAD_RUNNING_INACTIVELY;
-			Adapter->LEDInfo.bLedInitDone = FALSE;
+			Adapter->LEDInfo.bLedInitDone = false;
 			/* disable ALL LED */
 			for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
 				if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num
@@ -841,7 +841,7 @@
 		case LED_THREAD_ACTIVE:
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
 				DBG_LVL_ALL, "Activating LED thread again...");
-			if (Adapter->LinkUpStatus == FALSE)
+			if (Adapter->LinkUpStatus == false)
 				Adapter->DriverState = NO_NETWORK_ENTRY;
 			else
 				Adapter->DriverState = NORMAL_OPERATION;
@@ -860,7 +860,7 @@
 int InitLedSettings(struct bcm_mini_adapter *Adapter)
 {
 	int Status = STATUS_SUCCESS;
-	BOOLEAN bEnableThread = TRUE;
+	bool bEnableThread = TRUE;
 	UCHAR uiIndex = 0;
 
 	/*
@@ -899,7 +899,7 @@
 		init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent);
 		Adapter->LEDInfo.led_thread_running =
 					BCM_LED_THREAD_RUNNING_ACTIVELY;
-		Adapter->LEDInfo.bIdle_led_off = FALSE;
+		Adapter->LEDInfo.bIdle_led_off = false;
 		Adapter->LEDInfo.led_cntrl_threadid =
 			kthread_run((int (*)(void *)) LEDControlThread,
 			Adapter, "led_control_thread");
diff --git a/drivers/staging/bcm/nvm.c b/drivers/staging/bcm/nvm.c
index 91a5715..9e5f955 100644
--- a/drivers/staging/bcm/nvm.c
+++ b/drivers/staging/bcm/nvm.c
@@ -45,7 +45,7 @@
 	PUINT pBuffer,
 	unsigned int uiOffset,
 	unsigned int uiNumBytes,
-	BOOLEAN bVerify);
+	bool bVerify);
 
 static int GetFlashBaseAddr(struct bcm_mini_adapter *Adapter);
 
@@ -103,7 +103,7 @@
 		}
 		if (!(dwRetries%RETRIES_PER_DELAY))
 			udelay(1000);
-		uiStatus = 0 ;
+		uiStatus = 0;
 	}
 	return uiData;
 } /* ReadEEPROMStatusRegister */
@@ -1034,7 +1034,7 @@
 				PUINT pBuffer,
 				unsigned int uiOffset,
 				unsigned int uiNumBytes,
-				BOOLEAN bVerify)
+				bool bVerify)
 {
 	PCHAR pTempBuff			= NULL;
 	PUCHAR pcBuffer			= (PUCHAR)pBuffer;
@@ -1084,18 +1084,18 @@
 	 * for DSD calibration, allow it without checking of sector permission
 	 */
 
-	if (IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == FALSE)) {
+	if (IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == false)) {
 		index = 0;
 		uiTemp = uiNumSectTobeRead;
 		while (uiTemp) {
-			if (IsOffsetWritable(Adapter, uiOffsetFromSectStart + index * Adapter->uiSectorSize) == FALSE) {
+			if (IsOffsetWritable(Adapter, uiOffsetFromSectStart + index * Adapter->uiSectorSize) == false) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Sector Starting at offset <0X%X> is not writable",
 						(uiOffsetFromSectStart + index * Adapter->uiSectorSize));
 				Status = SECTOR_IS_NOT_WRITABLE;
 				goto BeceemFlashBulkWrite_EXIT;
 			}
 			uiTemp = uiTemp - 1;
-			index = index + 1 ;
+			index = index + 1;
 		}
 	}
 	Adapter->SelectedChip = RESET_CHIP_SELECT;
@@ -1222,7 +1222,7 @@
 				PUINT pBuffer,
 				unsigned int uiOffset,
 				unsigned int uiNumBytes,
-				BOOLEAN bVerify)
+				bool bVerify)
 {
 	PCHAR pTempBuff			= NULL;
 	PUCHAR pcBuffer			= (PUCHAR)pBuffer;
@@ -1265,18 +1265,18 @@
 			uiNumSectTobeRead++;
 	}
 
-	if (IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == FALSE)) {
+	if (IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == false)) {
 		index = 0;
 		uiTemp = uiNumSectTobeRead;
 		while (uiTemp) {
-			if (IsOffsetWritable(Adapter, uiOffsetFromSectStart + index * Adapter->uiSectorSize) == FALSE) {
+			if (IsOffsetWritable(Adapter, uiOffsetFromSectStart + index * Adapter->uiSectorSize) == false) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Sector Starting at offset <0X%x> is not writable",
 						(uiOffsetFromSectStart + index * Adapter->uiSectorSize));
 				Status = SECTOR_IS_NOT_WRITABLE;
 				goto BeceemFlashBulkWriteStatus_EXIT;
 			}
 			uiTemp = uiTemp - 1;
-			index = index + 1 ;
+			index = index + 1;
 		}
 	}
 
@@ -1525,7 +1525,7 @@
 
 			if (memcmp(&pBuffer[uiIndex], &auiData[0], MAX_RW_SIZE)) {
 				/* re-write */
-				BeceemEEPROMBulkWrite(Adapter, (PUCHAR)(pBuffer + uiIndex), uiOffset, MAX_RW_SIZE, FALSE);
+				BeceemEEPROMBulkWrite(Adapter, (PUCHAR)(pBuffer + uiIndex), uiOffset, MAX_RW_SIZE, false);
 				mdelay(3);
 				BeceemEEPROMBulkRead(Adapter, &auiData[0], uiOffset, MAX_RW_SIZE);
 
@@ -1539,7 +1539,7 @@
 			BeceemEEPROMBulkRead(Adapter, &uiData, uiOffset, 4);
 			if (uiData != pBuffer[uiIndex]) {
 				/* re-write */
-				BeceemEEPROMBulkWrite(Adapter, (PUCHAR)(pBuffer + uiIndex), uiOffset, 4, FALSE);
+				BeceemEEPROMBulkWrite(Adapter, (PUCHAR)(pBuffer + uiIndex), uiOffset, 4, false);
 				mdelay(3);
 				BeceemEEPROMBulkRead(Adapter, &uiData, uiOffset, 4);
 				if (uiData != pBuffer[uiIndex])
@@ -1724,7 +1724,7 @@
 			PUCHAR pBuffer,
 			unsigned int uiOffset,
 			unsigned int uiNumBytes,
-			BOOLEAN bVerify)
+			bool bVerify)
 {
 	unsigned int uiBytesToCopy	= uiNumBytes;
 	/* unsigned int uiRdbk		= 0; */
@@ -1819,7 +1819,7 @@
 	#endif
 
 	if (Adapter->eNVMType == NVM_FLASH) {
-		if (Adapter->bFlashRawRead == FALSE) {
+		if (Adapter->bFlashRawRead == false) {
 			if (IsSectionExistInVendorInfo(Adapter, Adapter->eActiveDSD))
 				return vendorextnReadSection(Adapter, (PUCHAR)pBuffer, Adapter->eActiveDSD, uiOffset, uiNumBytes);
 
@@ -1870,7 +1870,7 @@
 		PUINT pBuffer,
 		unsigned int uiOffset,
 		unsigned int uiNumBytes,
-		BOOLEAN bVerify)
+		bool bVerify)
 {
 	int Status = 0;
 	unsigned int uiTemp = 0;
@@ -2425,7 +2425,7 @@
 	B_UINT32 i = 0;
 	unsigned int uiSizeSection = 0;
 
-	Adapter->uiVendorExtnFlag = FALSE;
+	Adapter->uiVendorExtnFlag = false;
 
 	for (i = 0; i < TOTAL_SECTIONS; i++)
 		Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart = UNINIT_PTR_IN_CS;
@@ -2685,12 +2685,12 @@
 	switch (eFlashSectionVal) {
 	case ISO_IMAGE1:
 		if ((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start != UNINIT_PTR_IN_CS) &&
-			(IsNonCDLessDevice(Adapter) == FALSE))
+			(IsNonCDLessDevice(Adapter) == false))
 			SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start);
 		break;
 	case ISO_IMAGE2:
 		if ((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start != UNINIT_PTR_IN_CS) &&
-			(IsNonCDLessDevice(Adapter) == FALSE))
+			(IsNonCDLessDevice(Adapter) == false))
 			SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start);
 		break;
 	case DSD0:
@@ -2770,12 +2770,12 @@
 	switch (eFlash2xSectionVal) {
 	case ISO_IMAGE1:
 		if ((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End != UNINIT_PTR_IN_CS) &&
-			(IsNonCDLessDevice(Adapter) == FALSE))
+			(IsNonCDLessDevice(Adapter) == false))
 			SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End);
 		break;
 	case ISO_IMAGE2:
 		if ((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End != UNINIT_PTR_IN_CS) &&
-			(IsNonCDLessDevice(Adapter) == FALSE))
+			(IsNonCDLessDevice(Adapter) == false))
 			SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End);
 		break;
 	case DSD0:
@@ -2831,7 +2831,7 @@
 		SectEndOffset = INVALID_OFFSET;
 	}
 
-	return SectEndOffset ;
+	return SectEndOffset;
 }
 
 /*
@@ -3037,7 +3037,7 @@
  *
  * Return Value:-
  * Success:-TRUE ,  offset is writable
- * Failure:-FALSE, offset is RO
+ * Failure:-false, offset is RO
  *
  */
 
@@ -3062,7 +3062,7 @@
 	if (permissionBits == SECTOR_READWRITE_PERMISSION)
 		return TRUE;
 	else
-		return FALSE;
+		return false;
 }
 
 static int BcmDumpFlash2xSectionBitMap(struct bcm_flash2x_bitmap *psFlash2xBitMap)
@@ -3105,13 +3105,13 @@
 	struct bcm_flash2x_cs_info *psFlash2xCSInfo = Adapter->psFlash2xCSInfo;
 	enum bcm_flash2x_section_val uiHighestPriDSD = 0;
 	enum bcm_flash2x_section_val uiHighestPriISO = 0;
-	BOOLEAN SetActiveDSDDone = FALSE;
-	BOOLEAN SetActiveISODone = FALSE;
+	bool SetActiveDSDDone = false;
+	bool SetActiveISODone = false;
 
 	/* For 1.x map all the section except DSD0 will be shown as not present
 	 * This part will be used by calibration tool to detect the number of DSD present in Flash.
 	 */
-	if (IsFlash2x(Adapter) == FALSE) {
+	if (IsFlash2x(Adapter) == false) {
 		psFlash2xBitMap->ISO_IMAGE2 = 0;
 		psFlash2xBitMap->ISO_IMAGE1 = 0;
 		psFlash2xBitMap->DSD0 = FLASH2X_SECTION_VALID | FLASH2X_SECTION_ACT | FLASH2X_SECTION_PRESENT; /* 0xF; 0000(Reseved)1(Active)0(RW)1(valid)1(present) */
@@ -3143,10 +3143,10 @@
 			psFlash2xBitMap->ISO_IMAGE2 |= FLASH2X_SECTION_VALID;
 
 		/* Calculation for extrating the Access permission */
-		if (IsSectionWritable(Adapter, ISO_IMAGE2) == FALSE)
+		if (IsSectionWritable(Adapter, ISO_IMAGE2) == false)
 			psFlash2xBitMap->ISO_IMAGE2 |= FLASH2X_SECTION_RO;
 
-		if (SetActiveISODone == FALSE && uiHighestPriISO == ISO_IMAGE2) {
+		if (SetActiveISODone == false && uiHighestPriISO == ISO_IMAGE2) {
 			psFlash2xBitMap->ISO_IMAGE2 |= FLASH2X_SECTION_ACT;
 			SetActiveISODone = TRUE;
 		}
@@ -3163,10 +3163,10 @@
 			psFlash2xBitMap->ISO_IMAGE1 |= FLASH2X_SECTION_VALID;
 
 		/* Calculation for extrating the Access permission */
-		if (IsSectionWritable(Adapter, ISO_IMAGE1) == FALSE)
+		if (IsSectionWritable(Adapter, ISO_IMAGE1) == false)
 			psFlash2xBitMap->ISO_IMAGE1 |= FLASH2X_SECTION_RO;
 
-		if (SetActiveISODone == FALSE && uiHighestPriISO == ISO_IMAGE1) {
+		if (SetActiveISODone == false && uiHighestPriISO == ISO_IMAGE1) {
 			psFlash2xBitMap->ISO_IMAGE1 |= FLASH2X_SECTION_ACT;
 			SetActiveISODone = TRUE;
 		}
@@ -3183,11 +3183,11 @@
 			psFlash2xBitMap->DSD2 |= FLASH2X_SECTION_VALID;
 
 		/* Calculation for extrating the Access permission */
-		if (IsSectionWritable(Adapter, DSD2) == FALSE) {
+		if (IsSectionWritable(Adapter, DSD2) == false) {
 			psFlash2xBitMap->DSD2 |= FLASH2X_SECTION_RO;
 		} else {
 			/* Means section is writable */
-			if ((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD2)) {
+			if ((SetActiveDSDDone == false) && (uiHighestPriDSD == DSD2)) {
 				psFlash2xBitMap->DSD2 |= FLASH2X_SECTION_ACT;
 				SetActiveDSDDone = TRUE;
 			}
@@ -3205,11 +3205,11 @@
 			psFlash2xBitMap->DSD1 |= FLASH2X_SECTION_VALID;
 
 		/* Calculation for extrating the Access permission */
-		if (IsSectionWritable(Adapter, DSD1) == FALSE) {
+		if (IsSectionWritable(Adapter, DSD1) == false) {
 			psFlash2xBitMap->DSD1 |= FLASH2X_SECTION_RO;
 		} else {
 			/* Means section is writable */
-			if ((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD1)) {
+			if ((SetActiveDSDDone == false) && (uiHighestPriDSD == DSD1)) {
 				psFlash2xBitMap->DSD1 |= FLASH2X_SECTION_ACT;
 				SetActiveDSDDone = TRUE;
 			}
@@ -3227,11 +3227,11 @@
 			psFlash2xBitMap->DSD0 |= FLASH2X_SECTION_VALID;
 
 		/* Setting Access permission */
-		if (IsSectionWritable(Adapter, DSD0) == FALSE) {
+		if (IsSectionWritable(Adapter, DSD0) == false) {
 			psFlash2xBitMap->DSD0 |= FLASH2X_SECTION_RO;
 		} else {
 			/* Means section is writable */
-			if ((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD0)) {
+			if ((SetActiveDSDDone == false) && (uiHighestPriDSD == DSD0)) {
 				psFlash2xBitMap->DSD0 |= FLASH2X_SECTION_ACT;
 				SetActiveDSDDone = TRUE;
 			}
@@ -3249,7 +3249,7 @@
 		psFlash2xBitMap->VSA0 |= FLASH2X_SECTION_VALID;
 
 		/* Calculation for extrating the Access permission */
-		if (IsSectionWritable(Adapter, VSA0) == FALSE)
+		if (IsSectionWritable(Adapter, VSA0) == false)
 			psFlash2xBitMap->VSA0 |=  FLASH2X_SECTION_RO;
 
 		/* By Default section is Active */
@@ -3267,7 +3267,7 @@
 		psFlash2xBitMap->VSA1 |= FLASH2X_SECTION_VALID;
 
 		/* Checking For Access permission */
-		if (IsSectionWritable(Adapter, VSA1) == FALSE)
+		if (IsSectionWritable(Adapter, VSA1) == false)
 			psFlash2xBitMap->VSA1 |= FLASH2X_SECTION_RO;
 
 		/* By Default section is Active */
@@ -3285,7 +3285,7 @@
 		psFlash2xBitMap->VSA2 |= FLASH2X_SECTION_VALID;
 
 		/* Checking For Access permission */
-		if (IsSectionWritable(Adapter, VSA2) == FALSE)
+		if (IsSectionWritable(Adapter, VSA2) == false)
 			psFlash2xBitMap->VSA2 |= FLASH2X_SECTION_RO;
 
 		/* By Default section is Active */
@@ -3303,7 +3303,7 @@
 		psFlash2xBitMap->SCSI |= FLASH2X_SECTION_VALID;
 
 		/* Checking For Access permission */
-		if (IsSectionWritable(Adapter, SCSI) == FALSE)
+		if (IsSectionWritable(Adapter, SCSI) == false)
 			psFlash2xBitMap->SCSI |= FLASH2X_SECTION_RO;
 
 		/* By Default section is Active */
@@ -3321,7 +3321,7 @@
 		psFlash2xBitMap->CONTROL_SECTION |= FLASH2X_SECTION_VALID;
 
 		/* Checking For Access permission */
-		if (IsSectionWritable(Adapter, CONTROL_SECTION) == FALSE)
+		if (IsSectionWritable(Adapter, CONTROL_SECTION) == false)
 			psFlash2xBitMap->CONTROL_SECTION |= FLASH2X_SECTION_RO;
 
 		/* By Default section is Active */
@@ -3358,7 +3358,7 @@
 	/* struct bcm_dsd_header sDSD = {0};
 	 * struct bcm_iso_header sISO = {0};
 	 */
-	int HighestPriDSD = 0 ;
+	int HighestPriDSD = 0;
 	int HighestPriISO = 0;
 
 	Status = IsSectionWritable(Adapter, eFlash2xSectVal);
@@ -3517,7 +3517,7 @@
 		break;
 	}
 
-	Adapter->bHeaderChangeAllowed = FALSE;
+	Adapter->bHeaderChangeAllowed = false;
 	return Status;
 }
 
@@ -3536,7 +3536,7 @@
 	enum bcm_flash2x_section_val eISOReadPart = 0, eISOWritePart = 0;
 	unsigned int uiReadOffsetWithinPart = 0, uiWriteOffsetWithinPart = 0;
 	unsigned int uiTotalDataToCopy = 0;
-	BOOLEAN IsThisHeaderSector = FALSE;
+	bool IsThisHeaderSector = false;
 	unsigned int sigOffset = 0;
 	unsigned int ISOLength = 0;
 	unsigned int Status = STATUS_SUCCESS;
@@ -3669,14 +3669,14 @@
 				break;
 			}
 
-			Adapter->bHeaderChangeAllowed = FALSE;
+			Adapter->bHeaderChangeAllowed = false;
 			if (IsThisHeaderSector == TRUE) {
 				WriteToFlashWithoutSectorErase(Adapter,
 							SigBuff,
 							eISOWritePart,
 							sigOffset,
 							MAX_RW_SIZE);
-				IsThisHeaderSector = FALSE;
+				IsThisHeaderSector = false;
 			}
 			/* subtracting the written Data */
 			uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize;
@@ -3782,7 +3782,7 @@
 				break;
 			}
 
-			Adapter->bHeaderChangeAllowed = FALSE;
+			Adapter->bHeaderChangeAllowed = false;
 			if (IsThisHeaderSector == TRUE) {
 				WriteToFlashWithoutSectorErase(Adapter,
 							SigBuff,
@@ -3790,7 +3790,7 @@
 							sigOffset,
 							MAX_RW_SIZE);
 
-				IsThisHeaderSector = FALSE;
+				IsThisHeaderSector = false;
 			}
 
 			/* subtracting the written Data */
@@ -3848,13 +3848,13 @@
 	unsigned int uiOffset = 0;
 
 	/* struct bcm_dsd_header dsdHeader = {0}; */
-	if (Adapter->bSigCorrupted == FALSE) {
+	if (Adapter->bSigCorrupted == false) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Signature is not corrupted by driver, hence not restoring\n");
 		return STATUS_SUCCESS;
 	}
 
-	if (Adapter->bAllDSDWriteAllow == FALSE) {
-		if (IsSectionWritable(Adapter, eFlashSectionVal) == FALSE) {
+	if (Adapter->bAllDSDWriteAllow == false) {
+		if (IsSectionWritable(Adapter, eFlashSectionVal) == false) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section is not Writable...Hence can't Write signature");
 			return SECTOR_IS_NOT_WRITABLE;
 		}
@@ -3886,9 +3886,9 @@
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Restoring the signature");
 
 	Adapter->bHeaderChangeAllowed = TRUE;
-	Adapter->bSigCorrupted = FALSE;
+	Adapter->bSigCorrupted = false;
 	BcmFlash2xBulkWrite(Adapter, &uiSignature, eFlashSectionVal, uiOffset, SIGNATURE_SIZE, TRUE);
-	Adapter->bHeaderChangeAllowed = FALSE;
+	Adapter->bHeaderChangeAllowed = false;
 
 	return STATUS_SUCCESS;
 }
@@ -3899,7 +3899,7 @@
  * @Adapater :- Bcm Driver Private Data Structure
  * @psFlash2xReadWrite :-Flash2x Read/write structure pointer
  *
- * Return values:-Return TRUE is request is valid else FALSE.
+ * Return values:-Return TRUE is request is valid else false.
  */
 
 int validateFlash2xReadWrite(struct bcm_mini_adapter *Adapter, struct bcm_flash2x_readwrite *psFlash2xReadWrite)
@@ -3912,7 +3912,7 @@
 
 	if (IsSectionExistInFlash(Adapter, psFlash2xReadWrite->Section) != TRUE) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section<%x> does not exixt in Flash", psFlash2xReadWrite->Section);
-		return FALSE;
+		return false;
 	}
 	uiSectStartOffset = BcmGetSectionValStartOffset(Adapter, psFlash2xReadWrite->Section);
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Start offset :%x ,section :%d\n", uiSectStartOffset, psFlash2xReadWrite->Section);
@@ -3949,7 +3949,7 @@
 		return TRUE;
 	else {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Invalid Request....");
-		return FALSE;
+		return false;
 	}
 }
 
@@ -3966,7 +3966,7 @@
 	if (Adapter->uiFlashLayoutMajorVersion >= FLASH_2X_MAJOR_NUMBER)
 		return TRUE;
 	else
-		return FALSE;
+		return false;
 }
 
 /*
@@ -3986,7 +3986,7 @@
 		 * For All Valid Flash Versions... except 1.1, take the value from FlashBaseAddr
 		 * In case of Raw Read... use the default value
 		 */
-		if (Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == FALSE) &&
+		if (Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == false) &&
 			!((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1)))
 			uiBaseAddr = Adapter->uiFlashBaseAdd;
 		else
@@ -3996,7 +3996,7 @@
 		 * For All Valid Flash Versions... except 1.1, take the value from FlashBaseAddr
 		 * In case of Raw Read... use the default value
 		 */
-		if (Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == FALSE) &&
+		if (Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == false) &&
 			!((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1)))
 			uiBaseAddr = Adapter->uiFlashBaseAdd | FLASH_CONTIGIOUS_START_ADDR_BEFORE_INIT;
 		else
@@ -4094,7 +4094,7 @@
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read failed at offset :%d for NOB :%d", SrcSection, BytesToBeCopied);
 			break;
 		}
-		Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pBuff, DstSection, offset, BytesToBeCopied, FALSE);
+		Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pBuff, DstSection, offset, BytesToBeCopied, false);
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write failed at offset :%d for NOB :%d", DstSection, BytesToBeCopied);
 			break;
@@ -4110,7 +4110,7 @@
 	} while (numOfBytes > 0);
 
 	kfree(pBuff);
-	Adapter->bHeaderChangeAllowed = FALSE;
+	Adapter->bHeaderChangeAllowed = false;
 
 	return Status;
 }
@@ -4129,7 +4129,7 @@
 int SaveHeaderIfPresent(struct bcm_mini_adapter *Adapter, PUCHAR pBuff, unsigned int uiOffset)
 {
 	unsigned int offsetToProtect = 0, HeaderSizeToProtect = 0;
-	BOOLEAN bHasHeader = FALSE;
+	bool bHasHeader = false;
 	PUCHAR pTempBuff = NULL;
 	unsigned int uiSectAlignAddr = 0;
 	unsigned int sig = 0;
@@ -4153,7 +4153,7 @@
 		bHasHeader = TRUE;
 	}
 	/* If Header is present overwrite passed buffer with this */
-	if (bHasHeader && (Adapter->bHeaderChangeAllowed == FALSE)) {
+	if (bHasHeader && (Adapter->bHeaderChangeAllowed == false)) {
 		pTempBuff = kzalloc(HeaderSizeToProtect, GFP_KERNEL);
 		if (!pTempBuff) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed");
@@ -4172,13 +4172,13 @@
 		sig = ntohl(sig);
 		if ((sig & 0xFF000000) != CORRUPTED_PATTERN) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Desired pattern is not at sig offset. Hence won't restore");
-			Adapter->bSigCorrupted = FALSE;
+			Adapter->bSigCorrupted = false;
 			return STATUS_SUCCESS;
 		}
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, " Corrupted sig is :%X", sig);
 		*((PUINT)(pBuff + offsetToProtect + FIELD_OFFSET_IN_HEADER(struct bcm_dsd_header *, DSDImageMagicNumber))) = htonl(DSD_IMAGE_MAGIC_NUMBER);
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Restoring the signature in Header Write only");
-		Adapter->bSigCorrupted = FALSE;
+		Adapter->bSigCorrupted = false;
 	}
 
 	return STATUS_SUCCESS;
@@ -4450,7 +4450,7 @@
 		BcmDoChipSelect(Adapter, uiOffset);
 		uiPartOffset = (uiOffset & (FLASH_PART_SIZE - 1)) + GetFlashBaseAddr(Adapter);
 
-		for (i = 0 ; i < uiNumBytes; i += Adapter->ulFlashWriteSize) {
+		for (i = 0; i < uiNumBytes; i += Adapter->ulFlashWriteSize) {
 			if (Adapter->ulFlashWriteSize == BYTE_WRITE_SUPPORT)
 				Status = flashByteWrite(Adapter, uiPartOffset, pcBuff);
 			else
@@ -4469,19 +4469,19 @@
 	return Status;
 }
 
-BOOLEAN IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section)
+bool IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val section)
 {
-	BOOLEAN SectionPresent = FALSE;
+	bool SectionPresent = false;
 
 	switch (section) {
 	case ISO_IMAGE1:
 		if ((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start != UNINIT_PTR_IN_CS) &&
-			(IsNonCDLessDevice(Adapter) == FALSE))
+			(IsNonCDLessDevice(Adapter) == false))
 			SectionPresent = TRUE;
 		break;
 	case ISO_IMAGE2:
 		if ((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start != UNINIT_PTR_IN_CS) &&
-			(IsNonCDLessDevice(Adapter) == FALSE))
+			(IsNonCDLessDevice(Adapter) == false))
 			SectionPresent = TRUE;
 		break;
 	case DSD0:
@@ -4518,7 +4518,7 @@
 		break;
 	default:
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section Does not exist in Flash 2.x");
-		SectionPresent =  FALSE;
+		SectionPresent =  false;
 	}
 
 	return SectionPresent;
@@ -4527,17 +4527,17 @@
 int IsSectionWritable(struct bcm_mini_adapter *Adapter, enum bcm_flash2x_section_val Section)
 {
 	int offset = STATUS_FAILURE;
-	int Status = FALSE;
+	int Status = false;
 
-	if (IsSectionExistInFlash(Adapter, Section) == FALSE) {
+	if (IsSectionExistInFlash(Adapter, Section) == false) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section <%d> does not exixt", Section);
-		return FALSE;
+		return false;
 	}
 
 	offset = BcmGetSectionValStartOffset(Adapter, Section);
 	if (offset == INVALID_OFFSET) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section<%d> does not exixt", Section);
-		return FALSE;
+		return false;
 	}
 
 	if (IsSectionExistInVendorInfo(Adapter, Section))
@@ -4555,8 +4555,8 @@
 	unsigned int BlockStatus = 0;
 	unsigned int uiSectAlignAddr = 0;
 
-	Adapter->bSigCorrupted = FALSE;
-	if (Adapter->bAllDSDWriteAllow == FALSE) {
+	Adapter->bSigCorrupted = false;
+	if (Adapter->bAllDSDWriteAllow == false) {
 		if (IsSectionWritable(Adapter, eFlash2xSectionVal) != TRUE) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section is not Writable...Hence can't Corrupt signature");
 			return SECTOR_IS_NOT_WRITABLE;
@@ -4615,7 +4615,7 @@
 	unsigned int sig = 0;
 	unsigned int uiOffset = 0;
 
-	Adapter->bSigCorrupted = FALSE;
+	Adapter->bSigCorrupted = false;
 
 	if (IsSectionWritable(Adapter, eFlash2xSectionVal) != TRUE) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section is not Writable...Hence can't Corrupt signature");
@@ -4656,10 +4656,10 @@
 	return STATUS_SUCCESS;
 }
 
-BOOLEAN IsNonCDLessDevice(struct bcm_mini_adapter *Adapter)
+bool IsNonCDLessDevice(struct bcm_mini_adapter *Adapter)
 {
 	if (Adapter->psFlash2xCSInfo->IsCDLessDeviceBootSig == NON_CDLESS_DEVICE_BOOT_SIG)
 		return TRUE;
 	else
-		return FALSE;
+		return false;
 }
diff --git a/drivers/staging/bcm/vendorspecificextn.c b/drivers/staging/bcm/vendorspecificextn.c
index d38a06f..2c57a16 100644
--- a/drivers/staging/bcm/vendorspecificextn.c
+++ b/drivers/staging/bcm/vendorspecificextn.c
@@ -113,7 +113,7 @@
  *		STATUS_SUCCESS/STATUS_FAILURE
  */
 INT vendorextnWriteSection(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
-			UINT offset, UINT numOfBytes, BOOLEAN bVerify)
+			UINT offset, UINT numOfBytes, bool bVerify)
 {
 	return STATUS_FAILURE;
 }
diff --git a/drivers/staging/bcm/vendorspecificextn.h b/drivers/staging/bcm/vendorspecificextn.h
index 52890d2..ff57f05 100644
--- a/drivers/staging/bcm/vendorspecificextn.h
+++ b/drivers/staging/bcm/vendorspecificextn.h
@@ -11,7 +11,7 @@
 INT vendorextnReadSection(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
 			UINT offset, UINT numOfBytes);
 INT vendorextnWriteSection(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
-			UINT offset, UINT numOfBytes, BOOLEAN bVerify);
+			UINT offset, UINT numOfBytes, bool bVerify);
 INT vendorextnWriteSectionWithoutErase(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
 			UINT offset, UINT numOfBytes);
 
diff --git a/drivers/staging/btmtk_usb/btmtk_usb.c b/drivers/staging/btmtk_usb/btmtk_usb.c
index 0e783e8..7a9bf3b 100644
--- a/drivers/staging/btmtk_usb/btmtk_usb.c
+++ b/drivers/staging/btmtk_usb/btmtk_usb.c
@@ -16,7 +16,8 @@
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *  or on the worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *  or on the worldwide web at
+ *  http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
  *
  */
 
@@ -72,8 +73,9 @@
 
 	BT_DBG("%s\n", __func__);
 
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x01, DEVICE_VENDOR_REQUEST_OUT,
-						  0x01, 0x00, NULL, 0x00, CONTROL_TIMEOUT_JIFFIES);
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x01,
+			DEVICE_VENDOR_REQUEST_OUT, 0x01, 0x00,
+			NULL, 0x00, CONTROL_TIMEOUT_JIFFIES);
 
 	if (ret < 0) {
 		BT_ERR("%s error(%d)\n", __func__, ret);
@@ -91,20 +93,22 @@
 	u8 request = data->r_request;
 	struct usb_device *udev = data->udev;
 	int ret;
+	__le32 val_le;
 
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), request, DEVICE_VENDOR_REQUEST_IN,
-						  0x0, reg, data->io_buf, 4,
-						  CONTROL_TIMEOUT_JIFFIES);
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), request,
+			DEVICE_VENDOR_REQUEST_IN, 0x0, reg, data->io_buf,
+			4, CONTROL_TIMEOUT_JIFFIES);
 
 	if (ret < 0) {
 		*val = 0xffffffff;
-		BT_ERR("%s error(%d), reg=%x, value=%x\n", __func__, ret, reg, *val);
+		BT_ERR("%s error(%d), reg=%x, value=%x\n",
+				__func__, ret, reg, *val);
 		return ret;
 	}
 
-	memmove(val, data->io_buf, 4);
+	memmove(&val_le, data->io_buf, 4);
 
-	*val = le32_to_cpu(*val);
+	*val = le32_to_cpu(val_le);
 
 	if (ret > 0)
 		ret = 0;
@@ -122,12 +126,13 @@
 	index = (u16)reg;
 	value = val & 0x0000ffff;
 
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), request, DEVICE_VENDOR_REQUEST_OUT,
-						  value, index, NULL, 0,
-						  CONTROL_TIMEOUT_JIFFIES);
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), request,
+			DEVICE_VENDOR_REQUEST_OUT, value, index,
+			NULL, 0, CONTROL_TIMEOUT_JIFFIES);
 
 	if (ret < 0) {
-		BT_ERR("%s error(%d), reg=%x, value=%x\n", __func__, ret, reg, val);
+		BT_ERR("%s error(%d), reg=%x, value=%x\n",
+				__func__, ret, reg, val);
 		return ret;
 	}
 
@@ -139,7 +144,8 @@
 				value, index, NULL, 0, CONTROL_TIMEOUT_JIFFIES);
 
 	if (ret < 0) {
-		BT_ERR("%s error(%d), reg=%x, value=%x\n", __func__, ret, reg, val);
+		BT_ERR("%s error(%d), reg=%x, value=%x\n",
+				__func__, ret, reg, val);
 		return ret;
 	}
 
@@ -186,13 +192,15 @@
 		ret = request_firmware(&firmware, MT7650_FIRMWARE, &udev->dev);
 		if (ret < 0) {
 			if (ret == -ENOENT) {
-				BT_ERR("Firmware file \"%s\" not found \n", MT7650_FIRMWARE);
+				BT_ERR("Firmware file \"%s\" not found\n",
+						MT7650_FIRMWARE);
 			} else {
-				BT_ERR("Firmware file \"%s\" request failed (err=%d) \n",
+				BT_ERR("Firmware file \"%s\" request failed (err=%d)\n",
 					MT7650_FIRMWARE, ret);
 			}
 		} else {
-			BT_DBG("Firmware file \"%s\" Found \n", MT7650_FIRMWARE);
+			BT_DBG("Firmware file \"%s\" Found\n",
+					MT7650_FIRMWARE);
 			/* load firmware here */
 			data->firmware = firmware;
 			btmtk_usb_load_fw(data);
@@ -205,7 +213,8 @@
 		ret = request_firmware(&firmware, MT7662_FIRMWARE, &udev->dev);
 		if (ret < 0) {
 			if (ret == -ENOENT) {
-				BT_ERR("Firmware file \"%s\" not found\n", MT7662_FIRMWARE);
+				BT_ERR("Firmware file \"%s\" not found\n",
+						MT7662_FIRMWARE);
 			} else {
 				BT_ERR("Firmware file \"%s\" request failed (err=%d)\n",
 					MT7662_FIRMWARE, ret);
@@ -241,9 +250,8 @@
 	if (len)
 		sum += *((u8 *)pData);
 
-	while (sum >> 16) {
+	while (sum >> 16)
 		sum = (sum & 0xFFFF) + (sum >> 16);
-	}
 
 	return ~sum;
 }
@@ -258,13 +266,12 @@
 	memmove(data->io_buf, &data->rom_patch_offset, 4);
 	memmove(&data->io_buf[4], &checksum_len, 4);
 
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x1, DEVICE_VENDOR_REQUEST_IN,
-						  0x20, 0x00, data->io_buf, 8,
-						  CONTROL_TIMEOUT_JIFFIES);
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x1,
+			DEVICE_VENDOR_REQUEST_IN, 0x20, 0x00, data->io_buf,
+			8, CONTROL_TIMEOUT_JIFFIES);
 
-	if (ret < 0) {
+	if (ret < 0)
 		BT_ERR("%s error(%d)\n", __func__, ret);
-	}
 
 	return ret;
 }
@@ -274,6 +281,7 @@
 	int ret = 0;
 	struct usb_device *udev = data->udev;
 	u16 crc, count = 0;
+	__le16 crc_le;
 
 	BT_DBG("%s\n", __func__);
 
@@ -288,9 +296,9 @@
 			BT_ERR("%s error(%d)\n", __func__, ret);
 		}
 
-		memmove(&crc, data->io_buf, 2);
+		memmove(&crc_le, data->io_buf, 2);
 
-		crc = le16_to_cpu(crc);
+		crc = le16_to_cpu(crc_le);
 
 		if (crc != 0xFFFF)
 			break;
@@ -318,8 +326,8 @@
 	BT_DBG("%s\n", __func__);
 
 	ret = usb_control_msg(data->udev, usb_sndctrlpipe(data->udev, 0), 0x01,
-				DEVICE_CLASS_REQUEST_OUT, 0x12, 0x00, data->io_buf,
-				8, CONTROL_TIMEOUT_JIFFIES);
+				DEVICE_CLASS_REQUEST_OUT, 0x12, 0x00,
+				data->io_buf, 8, CONTROL_TIMEOUT_JIFFIES);
 
 	if (ret)
 		BT_ERR("%s:(%d)\n", __func__, ret);
@@ -350,7 +358,8 @@
 	unsigned char phase;
 	void *buf;
 	char *pos;
-	unsigned int pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
+	unsigned int pipe;
+	pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
 
 	if (!data->firmware) {
 		BT_ERR("%s:please assign a rom patch\n", __func__);
@@ -391,7 +400,8 @@
 		goto error0;
 	}
 
-	buf = usb_alloc_coherent(data->udev, UPLOAD_PATCH_UNIT, GFP_ATOMIC, &data_dma);
+	buf = usb_alloc_coherent(data->udev, UPLOAD_PATCH_UNIT,
+			GFP_ATOMIC, &data_dma);
 
 	if (!buf) {
 		ret = -ENOMEM;
@@ -409,78 +419,82 @@
 	/* loading rom patch */
 	while (1) {
 		s32 sent_len_max = UPLOAD_PATCH_UNIT - PATCH_HEADER_SIZE;
-		sent_len = (patch_len - cur_len) >= sent_len_max ? sent_len_max : (patch_len - cur_len);
+		sent_len = min_t(s32, (patch_len - cur_len), sent_len_max);
 
 		BT_DBG("patch_len = %d\n", patch_len);
 		BT_DBG("cur_len = %d\n", cur_len);
 		BT_DBG("sent_len = %d\n", sent_len);
 
-		if (sent_len > 0) {
-			if (first_block == 1) {
-				if (sent_len < sent_len_max)
-					phase = PATCH_PHASE3;
-				else
-					phase = PATCH_PHASE1;
-				first_block = 0;
-			} else if (sent_len == sent_len_max) {
-				phase = PATCH_PHASE2;
-			} else {
-				phase = PATCH_PHASE3;
-			}
-
-			/* prepare HCI header */
-			pos[0] = 0x6F;
-			pos[1] = 0xFC;
-			pos[2] = (sent_len + 5) & 0xFF;
-			pos[3] = ((sent_len + 5) >> 8) & 0xFF;
-
-			/* prepare WMT header */
-			pos[4] = 0x01;
-			pos[5] = 0x01;
-			pos[6] = (sent_len + 1) & 0xFF;
-			pos[7] = ((sent_len + 1) >> 8) & 0xFF;
-
-			pos[8] = phase;
-
-			memcpy(&pos[9], data->firmware->data + PATCH_INFO_SIZE + cur_len, sent_len);
-
-			BT_DBG("sent_len + PATCH_HEADER_SIZE = %d, phase = %d\n",
-					sent_len + PATCH_HEADER_SIZE, phase);
-
-			usb_fill_bulk_urb(urb,
-					data->udev,
-					pipe,
-					buf,
-					sent_len + PATCH_HEADER_SIZE,
-					load_rom_patch_complete,
-					&sent_to_mcu_done);
-
-			urb->transfer_dma = data_dma;
-			urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-			ret = usb_submit_urb(urb, GFP_ATOMIC);
-
-			if (ret)
-				goto error2;
-
-			if (!wait_for_completion_timeout(&sent_to_mcu_done, msecs_to_jiffies(1000))) {
-				usb_kill_urb(urb);
-				BT_ERR("upload rom_patch timeout\n");
-				goto error2;
-			}
-
-			BT_DBG(".");
-
-			mdelay(200);
-
-			cur_len += sent_len;
-
-		} else {
+		if (sent_len <= 0)
 			break;
+
+		if (first_block == 1) {
+			if (sent_len < sent_len_max)
+				phase = PATCH_PHASE3;
+			else
+				phase = PATCH_PHASE1;
+			first_block = 0;
+		} else if (sent_len == sent_len_max) {
+			phase = PATCH_PHASE2;
+		} else {
+			phase = PATCH_PHASE3;
 		}
+
+		/* prepare HCI header */
+		pos[0] = 0x6F;
+		pos[1] = 0xFC;
+		pos[2] = (sent_len + 5) & 0xFF;
+		pos[3] = ((sent_len + 5) >> 8) & 0xFF;
+
+		/* prepare WMT header */
+		pos[4] = 0x01;
+		pos[5] = 0x01;
+		pos[6] = (sent_len + 1) & 0xFF;
+		pos[7] = ((sent_len + 1) >> 8) & 0xFF;
+
+		pos[8] = phase;
+
+		memcpy(&pos[9],
+			data->firmware->data + PATCH_INFO_SIZE + cur_len,
+			sent_len);
+
+		BT_DBG("sent_len + PATCH_HEADER_SIZE = %d, phase = %d\n",
+				sent_len + PATCH_HEADER_SIZE, phase);
+
+		usb_fill_bulk_urb(urb,
+				data->udev,
+				pipe,
+				buf,
+				sent_len + PATCH_HEADER_SIZE,
+				load_rom_patch_complete,
+				&sent_to_mcu_done);
+
+		urb->transfer_dma = data_dma;
+		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+		ret = usb_submit_urb(urb, GFP_ATOMIC);
+
+		if (ret)
+			goto error2;
+
+		if (!wait_for_completion_timeout(&sent_to_mcu_done,
+					msecs_to_jiffies(1000))) {
+			usb_kill_urb(urb);
+			BT_ERR("upload rom_patch timeout\n");
+			goto error2;
+		}
+
+		BT_DBG(".");
+
+		mdelay(200);
+
+		cur_len += sent_len;
+
 	}
 
-	total_checksum = checksume16((u8 *)data->firmware->data + PATCH_INFO_SIZE, patch_len);
+	total_checksum = checksume16(
+			(u8 *)data->firmware->data + PATCH_INFO_SIZE,
+			patch_len);
 
 	BT_DBG("Send checksum req..\n");
 
@@ -520,8 +534,8 @@
 	memmove(buf, data->firmware->data + 32, 64);
 
 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x01,
-						  DEVICE_VENDOR_REQUEST_OUT, 0x12, 0x0, buf, 64,
-						  CONTROL_TIMEOUT_JIFFIES);
+			DEVICE_VENDOR_REQUEST_OUT, 0x12, 0x0, buf, 64,
+			CONTROL_TIMEOUT_JIFFIES);
 
 	if (ret < 0) {
 		BT_ERR("%s error(%d) step4\n", __func__, ret);
@@ -552,6 +566,7 @@
 	void *buf;
 	u32 cur_len = 0;
 	u32 packet_header = 0;
+	__le32 packet_header_le;
 	u32 value;
 	u32 ilm_len = 0, dlm_len = 0;
 	u16 fw_ver, build_ver;
@@ -559,7 +574,8 @@
 	dma_addr_t data_dma;
 	int ret = 0, sent_len;
 	struct completion sent_to_mcu_done;
-	unsigned int pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
+	unsigned int pipe;
+	pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
 
 	if (!data->firmware) {
 		BT_ERR("%s:please assign a fw\n", __func__);
@@ -598,9 +614,11 @@
 			| (*(data->firmware->data + 5) << 8)
 			| (*(data->firmware->data + 4));
 
-	fw_ver = (*(data->firmware->data + 11) << 8) | (*(data->firmware->data + 10));
+	fw_ver = (*(data->firmware->data + 11) << 8) |
+	      (*(data->firmware->data + 10));
 
-	build_ver = (*(data->firmware->data + 9) << 8) | (*(data->firmware->data + 8));
+	build_ver = (*(data->firmware->data + 9) << 8) |
+		 (*(data->firmware->data + 8));
 
 	BT_DBG("fw version:%d.%d.%02d ",
 			(fw_ver & 0xf000) >> 8,
@@ -657,22 +675,22 @@
 
 	/* Loading ILM */
 	while (1) {
-		sent_len = (ilm_len - cur_len) >= 14336 ? 14336 : (ilm_len - cur_len);
+		sent_len = min_t(s32, (ilm_len - cur_len), 14336);
 
 		if (sent_len > 0) {
 			packet_header &= ~(0xffffffff);
 			packet_header |= (sent_len << 16);
-			packet_header = cpu_to_le32(packet_header);
+			packet_header_le = cpu_to_le32(packet_header);
 
-			memmove(buf, &packet_header, 4);
-			memmove(buf + 4, data->firmware->data + 32 + cur_len, sent_len);
+			memmove(buf, &packet_header_le, 4);
+			memmove(buf + 4, data->firmware->data + 32 + cur_len,
+					sent_len);
 
 			/* U2M_PDMA descriptor */
 			btmtk_usb_io_write32(data, 0x230, cur_len);
 
-			while ((sent_len % 4) != 0) {
+			while ((sent_len % 4) != 0)
 				sent_len++;
-			}
 
 			/* U2M_PDMA length */
 			btmtk_usb_io_write32(data, 0x234, sent_len << 16);
@@ -693,7 +711,8 @@
 			if (ret)
 				goto error3;
 
-			if (!wait_for_completion_timeout(&sent_to_mcu_done, msecs_to_jiffies(1000))) {
+			if (!wait_for_completion_timeout(&sent_to_mcu_done,
+						msecs_to_jiffies(1000))) {
 				usb_kill_urb(urb);
 				BT_ERR("upload ilm fw timeout\n");
 				goto error3;
@@ -714,58 +733,60 @@
 
 	/* Loading DLM */
 	while (1) {
-		sent_len = (dlm_len - cur_len) >= 14336 ? 14336 : (dlm_len - cur_len);
+		sent_len = min_t(s32, (dlm_len - cur_len), 14336);
 
-		if (sent_len > 0) {
-			packet_header &= ~(0xffffffff);
-			packet_header |= (sent_len << 16);
-			packet_header = cpu_to_le32(packet_header);
-
-			memmove(buf, &packet_header, 4);
-			memmove(buf + 4, data->firmware->data + 32 + ilm_len + cur_len, sent_len);
-
-			/* U2M_PDMA descriptor */
-			btmtk_usb_io_write32(data, 0x230, 0x80000 + cur_len);
-
-			while ((sent_len % 4) != 0) {
-				BT_DBG("sent_len is not divided by 4\n");
-				sent_len++;
-			}
-
-			/* U2M_PDMA length */
-			btmtk_usb_io_write32(data, 0x234, sent_len << 16);
-
-			usb_fill_bulk_urb(urb,
-					udev,
-					pipe,
-					buf,
-					sent_len + 4,
-					load_fw_complete,
-					&sent_to_mcu_done);
-
-			urb->transfer_dma = data_dma;
-			urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-			ret = usb_submit_urb(urb, GFP_ATOMIC);
-
-			if (ret)
-				goto error3;
-
-			if (!wait_for_completion_timeout(&sent_to_mcu_done, msecs_to_jiffies(1000))) {
-				usb_kill_urb(urb);
-				BT_ERR("upload dlm fw timeout\n");
-				goto error3;
-			}
-
-			BT_DBG(".");
-
-			mdelay(500);
-
-			cur_len += sent_len;
-
-		} else {
+		if (sent_len <= 0)
 			break;
+
+		packet_header &= ~(0xffffffff);
+		packet_header |= (sent_len << 16);
+		packet_header_le = cpu_to_le32(packet_header);
+
+		memmove(buf, &packet_header_le, 4);
+		memmove(buf + 4,
+			data->firmware->data + 32 + ilm_len + cur_len,
+			sent_len);
+
+		/* U2M_PDMA descriptor */
+		btmtk_usb_io_write32(data, 0x230, 0x80000 + cur_len);
+
+		while ((sent_len % 4) != 0) {
+			BT_DBG("sent_len is not divided by 4\n");
+			sent_len++;
 		}
+
+		/* U2M_PDMA length */
+		btmtk_usb_io_write32(data, 0x234, sent_len << 16);
+
+		usb_fill_bulk_urb(urb,
+				udev,
+				pipe,
+				buf,
+				sent_len + 4,
+				load_fw_complete,
+				&sent_to_mcu_done);
+
+		urb->transfer_dma = data_dma;
+		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+		ret = usb_submit_urb(urb, GFP_ATOMIC);
+
+		if (ret)
+			goto error3;
+
+		if (!wait_for_completion_timeout(&sent_to_mcu_done,
+					msecs_to_jiffies(1000))) {
+			usb_kill_urb(urb);
+			BT_ERR("upload dlm fw timeout\n");
+			goto error3;
+		}
+
+		BT_DBG(".");
+
+		mdelay(500);
+
+		cur_len += sent_len;
+
 	}
 
 	/* upload 64bytes interrupt vector */
@@ -921,9 +942,8 @@
 	BT_DBG("%s:%s urb %p status %d count %d", __func__, hdev->name,
 					urb, urb->status, urb->actual_length);
 
-	if (!test_bit(HCI_RUNNING, &hdev->flags)) {
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
 		return;
-	}
 
 	if (urb->status == 0) {
 		hdev->stat.byte_rx += urb->actual_length;
@@ -978,8 +998,8 @@
 
 	pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
 
-	usb_fill_bulk_urb(urb, data->udev, pipe,
-					buf, size, btmtk_usb_bulk_in_complete, hdev);
+	usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
+			btmtk_usb_bulk_in_complete, hdev);
 
 	urb->transfer_flags |= URB_FREE_BUFFER;
 
@@ -1015,7 +1035,8 @@
 	if (urb->status == 0) {
 		for (i = 0; i < urb->number_of_packets; i++) {
 			unsigned int offset = urb->iso_frame_desc[i].offset;
-			unsigned int length = urb->iso_frame_desc[i].actual_length;
+			unsigned int length;
+			length = urb->iso_frame_desc[i].actual_length;
 
 			if (urb->iso_frame_desc[i].status)
 				continue;
@@ -1096,8 +1117,9 @@
 
 	pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
 
-	usb_fill_int_urb(urb, data->udev, pipe, buf, size, btmtk_usb_isoc_in_complete,
-				hdev, data->isoc_rx_ep->bInterval);
+	usb_fill_int_urb(urb, data->udev, pipe, buf, size,
+			btmtk_usb_isoc_in_complete, hdev,
+			data->isoc_rx_ep->bInterval);
 
 	urb->transfer_flags  = URB_FREE_BUFFER | URB_ISO_ASAP;
 
@@ -1306,7 +1328,8 @@
 		}
 
 		usb_fill_control_urb(urb, data->udev, pipe, (void *) dr,
-				skb->data, skb->len, btmtk_usb_tx_complete, skb);
+				skb->data, skb->len,
+				btmtk_usb_tx_complete, skb);
 
 		hdev->stat.cmd_tx++;
 		break;
@@ -1322,8 +1345,8 @@
 		pipe = usb_sndbulkpipe(data->udev,
 					data->bulk_tx_ep->bEndpointAddress);
 
-		usb_fill_bulk_urb(urb, data->udev, pipe,
-				skb->data, skb->len, btmtk_usb_tx_complete, skb);
+		usb_fill_bulk_urb(urb, data->udev, pipe, skb->data,
+				skb->len, btmtk_usb_tx_complete, skb);
 
 		hdev->stat.acl_tx++;
 		BT_DBG("HCI_ACLDATA_PKT:\n");
@@ -1442,7 +1465,8 @@
 
 static void btmtk_usb_work(struct work_struct *work)
 {
-	struct btmtk_usb_data *data = container_of(work, struct btmtk_usb_data, work);
+	struct btmtk_usb_data *data = container_of(work, struct btmtk_usb_data,
+			work);
 	struct hci_dev *hdev = data->hdev;
 	int new_alts;
 	int err;
@@ -1451,7 +1475,8 @@
 
 	if (hdev->conn_hash.sco_num > 0) {
 		if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
-			err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
+			err = usb_autopm_get_interface(data->isoc ?
+					data->isoc : data->intf);
 			if (err < 0) {
 				clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
 				usb_kill_anchored_urbs(&data->isoc_anchor);
@@ -1489,13 +1514,15 @@
 		__set_isoc_interface(hdev, 0);
 
 		if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
-			 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
+			usb_autopm_put_interface(data->isoc ?
+					 data->isoc : data->intf);
 	}
 }
 
 static void btmtk_usb_waker(struct work_struct *work)
 {
-	struct btmtk_usb_data *data = container_of(work, struct btmtk_usb_data, waker);
+	struct btmtk_usb_data *data = container_of(work, struct btmtk_usb_data,
+			waker);
 	int err;
 
 	err = usb_autopm_get_interface(data->intf);
diff --git a/drivers/staging/ced1401/ced_ioc.c b/drivers/staging/ced1401/ced_ioc.c
index 2dbaf39e..62efd74 100644
--- a/drivers/staging/ced1401/ced_ioc.c
+++ b/drivers/staging/ced1401/ced_ioc.c
@@ -692,10 +692,7 @@
 		__func__, puBuf, dwLength, bCircular);
 
 	/*  To pin down user pages we must first acquire the mapping semaphore. */
-	down_read(&current->mm->mmap_sem);	/*  get memory map semaphore */
-	nPages = get_user_pages(current, current->mm, ulStart, len, 1, 0,
-				pPages, NULL);
-	up_read(&current->mm->mmap_sem);	/*  release the semaphore */
+	nPages = get_user_pages_fast(ulStart, len, 1, pPages);
 	dev_dbg(&pdx->interface->dev, "%s nPages = %d", __func__, nPages);
 
 	if (nPages > 0) {		/*  if we succeeded */
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index f73287e..bfa27e7 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -485,6 +485,7 @@
 	tristate "NI AT-MIO E series ISA-PNP card support"
 	select COMEDI_8255
 	select COMEDI_NI_TIO
+	select COMEDI_FC
 	---help---
 	  Enable support for National Instruments AT-MIO E series cards
 	  National Instruments AT-MIO-16E-1 (ni_atmio),
@@ -990,8 +991,6 @@
 
 config COMEDI_NI_6527
 	tristate "NI 6527 support"
-	depends on HAS_DMA
-	select COMEDI_MITE
 	---help---
 	  Enable support for the National Instruments 6527 PCI card
 
diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c
index 94b2385f..4e26bd7 100644
--- a/drivers/staging/comedi/comedi_buf.c
+++ b/drivers/staging/comedi/comedi_buf.c
@@ -344,7 +344,7 @@
 }
 EXPORT_SYMBOL_GPL(comedi_buf_read_free);
 
-int comedi_buf_put(struct comedi_async *async, short x)
+int comedi_buf_put(struct comedi_async *async, unsigned short x)
 {
 	unsigned int n = __comedi_buf_write_alloc(async, sizeof(short), 1);
 
@@ -352,20 +352,20 @@
 		async->events |= COMEDI_CB_ERROR;
 		return 0;
 	}
-	*(short *)(async->prealloc_buf + async->buf_write_ptr) = x;
+	*(unsigned short *)(async->prealloc_buf + async->buf_write_ptr) = x;
 	comedi_buf_write_free(async, sizeof(short));
 	return 1;
 }
 EXPORT_SYMBOL_GPL(comedi_buf_put);
 
-int comedi_buf_get(struct comedi_async *async, short *x)
+int comedi_buf_get(struct comedi_async *async, unsigned short *x)
 {
 	unsigned int n = comedi_buf_read_n_available(async);
 
 	if (n < sizeof(short))
 		return 0;
 	comedi_buf_read_alloc(async, sizeof(short));
-	*x = *(short *)(async->prealloc_buf + async->buf_read_ptr);
+	*x = *(unsigned short *)(async->prealloc_buf + async->buf_read_ptr);
 	comedi_buf_read_free(async, sizeof(short));
 	return 1;
 }
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 1636c7c..f3d59e2 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -543,7 +543,7 @@
 {
 	s->private = kzalloc(size, GFP_KERNEL);
 	if (s->private)
-		comedi_set_subdevice_runflags(s, ~0, SRF_FREE_SPRIV);
+		s->runflags |= SRF_FREE_SPRIV;
 	return s->private;
 }
 EXPORT_SYMBOL_GPL(comedi_alloc_spriv);
@@ -806,7 +806,6 @@
 		} else {
 			us->range_type = 0;	/* XXX */
 		}
-		us->flags = s->flags;
 
 		if (s->busy)
 			us->subd_flags |= SDF_BUSY;
@@ -818,8 +817,6 @@
 			us->subd_flags |= SDF_LOCK_OWNER;
 		if (!s->maxdata && s->maxdata_list)
 			us->subd_flags |= SDF_MAXDATA;
-		if (s->flaglist)
-			us->subd_flags |= SDF_FLAGS;
 		if (s->range_table_list)
 			us->subd_flags |= SDF_RANGETYPE;
 		if (s->do_cmd)
@@ -829,8 +826,6 @@
 			us->insn_bits_support = COMEDI_SUPPORTED;
 		else
 			us->insn_bits_support = COMEDI_UNSUPPORTED;
-
-		us->settling_time_0 = s->settling_time_0;
 	}
 
 	ret = copy_to_user(arg, tmp, dev->n_subdevices * sizeof(*tmp));
@@ -875,13 +870,8 @@
 			return -EFAULT;
 	}
 
-	if (it.flaglist) {
-		if (!s->flaglist)
-			return -EINVAL;
-		if (copy_to_user(it.flaglist, s->flaglist,
-				 s->n_chan * sizeof(unsigned int)))
-			return -EFAULT;
-	}
+	if (it.flaglist)
+		return -EINVAL;	/* flaglist not supported */
 
 	if (it.rangelist) {
 		int i;
@@ -1431,17 +1421,11 @@
 	async->cmd = cmd;
 	async->cmd.data = NULL;
 	/* load channel/gain list */
-	async->cmd.chanlist =
-	    kmalloc(async->cmd.chanlist_len * sizeof(int), GFP_KERNEL);
-	if (!async->cmd.chanlist) {
-		DPRINTK("allocation failed\n");
-		return -ENOMEM;
-	}
-
-	if (copy_from_user(async->cmd.chanlist, user_chanlist,
-			   async->cmd.chanlist_len * sizeof(int))) {
-		DPRINTK("fault reading chanlist\n");
-		ret = -EFAULT;
+	async->cmd.chanlist = memdup_user(user_chanlist,
+					  async->cmd.chanlist_len * sizeof(int));
+	if (IS_ERR(async->cmd.chanlist)) {
+		ret = PTR_ERR(async->cmd.chanlist);
+		DPRINTK("memdup_user failed with code %d\n", ret);
 		goto cleanup;
 	}
 
@@ -1485,7 +1469,8 @@
 	if (async->cmd.flags & TRIG_WAKE_EOS)
 		async->cb_mask |= COMEDI_CB_EOS;
 
-	comedi_set_subdevice_runflags(s, ~0, SRF_USER | SRF_RUNNING);
+	comedi_set_subdevice_runflags(s, SRF_USER | SRF_ERROR | SRF_RUNNING,
+				      SRF_USER | SRF_RUNNING);
 
 	/* set s->busy _after_ setting SRF_RUNNING flag to avoid race with
 	 * comedi_read() or comedi_write() */
@@ -1558,18 +1543,11 @@
 
 	/* load channel/gain list */
 	if (cmd.chanlist) {
-		chanlist =
-		    kmalloc(cmd.chanlist_len * sizeof(int), GFP_KERNEL);
-		if (!chanlist) {
-			DPRINTK("allocation failed\n");
-			ret = -ENOMEM;
-			goto cleanup;
-		}
-
-		if (copy_from_user(chanlist, user_chanlist,
-				   cmd.chanlist_len * sizeof(int))) {
-			DPRINTK("fault reading chanlist\n");
-			ret = -EFAULT;
+		chanlist = memdup_user(user_chanlist,
+				       cmd.chanlist_len * sizeof(int));
+		if (IS_ERR(chanlist)) {
+			ret = PTR_ERR(chanlist);
+			DPRINTK("memdup_user exited with code %d", ret);
 			goto cleanup;
 		}
 
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index 2e19f65..143be80 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -57,11 +57,6 @@
 	unsigned int maxdata;	/* if maxdata==0, use list */
 	const unsigned int *maxdata_list;	/* list is channel specific */
 
-	unsigned int flags;
-	const unsigned int *flaglist;
-
-	unsigned int settling_time_0;
-
 	const struct comedi_lrange *range_table;
 	const struct comedi_lrange *const *range_table_list;
 
@@ -307,7 +302,26 @@
 	return s->range_table->range[range].min >= 0;
 }
 
-/* some silly little inline functions */
+static inline bool comedi_chan_range_is_bipolar(struct comedi_subdevice *s,
+						unsigned int chan,
+						unsigned int range)
+{
+	return s->range_table_list[chan]->range[range].min < 0;
+}
+
+static inline bool comedi_chan_range_is_unipolar(struct comedi_subdevice *s,
+						 unsigned int chan,
+						 unsigned int range)
+{
+	return s->range_table_list[chan]->range[range].min >= 0;
+}
+
+/* munge between offset binary and two's complement values */
+static inline unsigned int comedi_offset_munge(struct comedi_subdevice *s,
+					       unsigned int val)
+{
+	return val ^ s->maxdata ^ (s->maxdata >> 1);
+}
 
 static inline unsigned int bytes_per_sample(const struct comedi_subdevice *subd)
 {
@@ -332,8 +346,8 @@
 unsigned int comedi_buf_read_alloc(struct comedi_async *, unsigned int);
 unsigned int comedi_buf_read_free(struct comedi_async *, unsigned int);
 
-int comedi_buf_put(struct comedi_async *, short);
-int comedi_buf_get(struct comedi_async *, short *);
+int comedi_buf_put(struct comedi_async *, unsigned short);
+int comedi_buf_get(struct comedi_async *, unsigned short *);
 
 void comedi_buf_memcpy_to(struct comedi_async *async, unsigned int offset,
 			  const void *source, unsigned int num_bytes);
@@ -345,6 +359,8 @@
 int comedi_dio_insn_config(struct comedi_device *, struct comedi_subdevice *,
 			   struct comedi_insn *, unsigned int *data,
 			   unsigned int mask);
+unsigned int comedi_dio_update_state(struct comedi_subdevice *,
+				     unsigned int *data);
 
 void *comedi_alloc_devpriv(struct comedi_device *, size_t);
 int comedi_alloc_subdevices(struct comedi_device *, int);
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 317a821..8f02bf6 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -190,6 +190,28 @@
 }
 EXPORT_SYMBOL_GPL(comedi_dio_insn_config);
 
+/**
+ * comedi_dio_update_state() - update the internal state of DIO subdevices.
+ * @s: comedi_subdevice struct
+ * @data: the channel mask and bits to update
+ */
+unsigned int comedi_dio_update_state(struct comedi_subdevice *s,
+				     unsigned int *data)
+{
+	unsigned int chanmask = (s->n_chan < 32) ? ((1 << s->n_chan) - 1)
+						 : 0xffffffff;
+	unsigned int mask = data[0] & chanmask;
+	unsigned int bits = data[1];
+
+	if (mask) {
+		s->state &= ~mask;
+		s->state |= (bits & mask);
+	}
+
+	return mask;
+}
+EXPORT_SYMBOL_GPL(comedi_dio_update_state);
+
 static int insn_rw_emulate_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data)
@@ -285,6 +307,13 @@
 		if (s->type == COMEDI_SUBD_UNUSED)
 			continue;
 
+		if (s->type == COMEDI_SUBD_DO) {
+			if (s->n_chan < 32)
+				s->io_bits = (1 << s->n_chan) - 1;
+			else
+				s->io_bits = 0xffffffff;
+		}
+
 		if (s->len_chanlist == 0)
 			s->len_chanlist = 1;
 
diff --git a/drivers/staging/comedi/drivers/8253.h b/drivers/staging/comedi/drivers/8253.h
index 3abedcd..e3d737c 100644
--- a/drivers/staging/comedi/drivers/8253.h
+++ b/drivers/staging/comedi/drivers/8253.h
@@ -21,6 +21,15 @@
 
 #include "../comedi.h"
 
+/*
+ * Common oscillator base values in nanoseconds
+ */
+#define I8254_OSC_BASE_10MHZ		100
+#define I8254_OSC_BASE_5MHZ		200
+#define I8254_OSC_BASE_4MHZ		250
+#define I8254_OSC_BASE_2MHZ		500
+#define I8254_OSC_BASE_1MHZ		1000
+
 #define i8253_cascade_ns_to_timer i8253_cascade_ns_to_timer_2div
 
 static inline void i8253_cascade_ns_to_timer_2div_old(int i8253_osc_base,
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index 2f070fd..b4009e8 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -112,7 +112,7 @@
 {
 	struct subdev_8255_private *spriv = s->private;
 	unsigned long iobase = spriv->iobase;
-	short d;
+	unsigned short d;
 
 	d = spriv->io(0, _8255_DATA, 0, iobase);
 	d |= (spriv->io(0, _8255_DATA + 1, 0, iobase) << 8);
@@ -126,30 +126,24 @@
 
 static int subdev_8255_insn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+			    struct comedi_insn *insn,
+			    unsigned int *data)
 {
 	struct subdev_8255_private *spriv = s->private;
 	unsigned long iobase = spriv->iobase;
 	unsigned int mask;
-	unsigned int bits;
 	unsigned int v;
 
-	mask = data[0];
-	bits = data[1];
-
+	mask = comedi_dio_update_state(s, data);
 	if (mask) {
-		v = s->state;
-		v &= ~mask;
-		v |= (bits & mask);
-
 		if (mask & 0xff)
-			spriv->io(1, _8255_DATA, v & 0xff, iobase);
+			spriv->io(1, _8255_DATA, s->state & 0xff, iobase);
 		if (mask & 0xff00)
-			spriv->io(1, _8255_DATA + 1, (v >> 8) & 0xff, iobase);
+			spriv->io(1, _8255_DATA + 1, (s->state >> 8) & 0xff,
+				  iobase);
 		if (mask & 0xff0000)
-			spriv->io(1, _8255_DATA + 2, (v >> 16) & 0xff, iobase);
-
-		s->state = v;
+			spriv->io(1, _8255_DATA + 2, (s->state >> 16) & 0xff,
+				  iobase);
 	}
 
 	v = spriv->io(0, _8255_DATA, 0, iobase);
@@ -288,9 +282,6 @@
 	s->insn_bits	= subdev_8255_insn;
 	s->insn_config	= subdev_8255_insn_config;
 
-	s->state	= 0;
-	s->io_bits	= 0;
-
 	subdev_8255_do_config(dev, s);
 
 	return 0;
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 63dff77..dc87df0 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -204,7 +204,6 @@
 		s->len_chanlist =
 			devpriv->s_EeParameters.i_NbrDiChannel;
 		s->range_table = &range_digital;
-		s->io_bits = 0;	/* all bits input */
 		s->insn_config = this_board->di_config;
 		s->insn_read = this_board->di_read;
 		s->insn_write = this_board->di_write;
@@ -223,7 +222,6 @@
 		s->len_chanlist =
 			devpriv->s_EeParameters.i_NbrDoChannel;
 		s->range_table = &range_digital;
-		s->io_bits = 0xf;	/* all bits output */
 
 		/* insn_config - for digital output memory */
 		s->insn_config = this_board->do_config;
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.h b/drivers/staging/comedi/drivers/addi-data/addi_common.h
index dfd1e66..2ed2da3 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@@ -133,7 +133,7 @@
 	unsigned short us_UseDma;	/*  To use Dma or not */
 	unsigned char b_DmaDoubleBuffer;	/*  we can use double buffering */
 	unsigned int ui_DmaActualBuffer;	/*  which buffer is used now */
-	short *ul_DmaBufferVirtual[2];	/*  pointers to begin of DMA buffer */
+	unsigned short *ul_DmaBufferVirtual[2];	/*  pointers to DMA buffer */
 	unsigned int ul_DmaBufferHw[2];	/*  hw address of DMA buff */
 	unsigned int ui_DmaBufferSize[2];	/*  size of dma buffer in bytes */
 	unsigned int ui_DmaBufferUsesize[2];	/*  which size we may now used for transfer */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index e3cc429..8466854 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -260,18 +260,13 @@
 				 unsigned int *data)
 {
 	struct addi_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 
 	s->state = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 			APCI1564_DIGITAL_OP_RW);
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
 
+	if (comedi_dio_update_state(s, data))
 		outl(s->state, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 			APCI1564_DIGITAL_OP_RW);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 1449b92..3c9eec8 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -1391,7 +1391,7 @@
  */
 static void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,
 						  struct comedi_subdevice *s,
-						  short *dma_buffer,
+						  unsigned short *dma_buffer,
 						  unsigned int num_samples)
 {
 	struct addi_private *devpriv = dev->private;
@@ -2175,21 +2175,16 @@
 				 unsigned int *data)
 {
 	struct addi_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-	unsigned int val;
 
-	/* The do channels are bits 7:4 of the do register */
-	val = devpriv->b_DigitalOutputRegister >> 4;
-	if (mask) {
-		val &= ~mask;
-		val |= (bits & mask);
-		devpriv->b_DigitalOutputRegister = val << 4;
+	if (comedi_dio_update_state(s, data)) {
+		/* The do channels are bits 7:4 of the do register */
+		devpriv->b_DigitalOutputRegister = s->state << 4;
 
-		outb(val << 4, devpriv->iobase + APCI3120_DIGITAL_OUTPUT);
+		outb(devpriv->b_DigitalOutputRegister,
+		     devpriv->iobase + APCI3120_DIGITAL_OUTPUT);
 	}
 
-	data[1] = val;
+	data[1] = s->state;
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index 32dce03..dc73d4d 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -623,16 +623,11 @@
 				 unsigned int *data)
 {
 	struct addi_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 
 	s->state = inl(devpriv->i_IobaseAddon) & 0xf;
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
 
+	if (comedi_dio_update_state(s, data))
 		outl(s->state, devpriv->i_IobaseAddon);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index 08674c1..9d1b142 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -90,16 +90,10 @@
 				 struct comedi_insn *insn,
 				 unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
 	s->state = inw(dev->iobase + APCI1516_DO_REG);
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
 
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + APCI1516_DO_REG);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index 9652374..5ee204bc 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -87,17 +87,8 @@
 				  struct comedi_insn *insn,
 				  unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	/* Only update the channels configured as outputs */
-	mask &= s->io_bits;
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		outl(s->state, dev->iobase + APCI16XX_OUT_REG(s->index));
-	}
 
 	data[1] = inl(dev->iobase + APCI16XX_IN_REG(s->index));
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index 6b0ea16..c77ee87 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -57,16 +57,10 @@
 				 struct comedi_insn *insn,
 				 unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
 	s->state = inl(dev->iobase + APCI2032_DO_REG);
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
 
+	if (comedi_dio_update_state(s, data))
 		outl(s->state, dev->iobase + APCI2032_DO_REG);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index 92ac8ec..7fb32e7 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -50,16 +50,10 @@
 				 struct comedi_insn *insn,
 				 unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
 	s->state = inw(dev->iobase + APCI2200_DO_REG);
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
 
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + APCI2200_DO_REG);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c
index d804957..67d09e8 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -164,7 +164,6 @@
 	s->maxdata = 1;
 	s->len_chanlist = this_board->i_NbrDiChannel;
 	s->range_table = &range_digital;
-	s->io_bits = 0;	/* all bits input */
 	s->insn_bits = apci3120_di_insn_bits;
 
 	/*  Allocate and Initialise DO Subdevice Structures */
@@ -176,7 +175,6 @@
 	s->maxdata = this_board->i_DoMaxdata;
 	s->len_chanlist = this_board->i_NbrDoChannel;
 	s->range_table = &range_digital;
-	s->io_bits = 0xf;	/* all bits output */
 	s->insn_bits = apci3120_do_insn_bits;
 
 	/*  Allocate and Initialise Timer Subdevice Structures */
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index d9650ff..6138440 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -161,16 +161,10 @@
 				 struct comedi_insn *insn,
 				 unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
 	s->state = inl(dev->iobase + APCI3501_DO_REG);
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
 
+	if (comedi_dio_update_state(s, data))
 		outl(s->state, dev->iobase + APCI3501_DO_REG);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
index cf5dd10..761cbf8 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
@@ -664,16 +664,10 @@
 				 struct comedi_insn *insn,
 				 unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
 	s->state = inl(dev->iobase + 48) & 0xf;
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
 
+	if (comedi_dio_update_state(s, data))
 		outl(s->state, dev->iobase + 48);
-	}
 
 	data[1] = s->state;
 
@@ -717,16 +711,11 @@
 				  struct comedi_insn *insn,
 				  unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
+	unsigned int mask;
 	unsigned int val;
 
-	/* only update output channels */
-	mask &= s->io_bits;
+	mask = comedi_dio_update_state(s, data);
 	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
 		if (mask & 0xff)
 			outl(s->state & 0xff, dev->iobase + 80);
 		if (mask & 0xff0000)
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index a67ad57..dd092c795 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -1,44 +1,35 @@
 /*
-    comedi/drivers/adl_pci6208.c
+ * adl_pci6208.c
+ * Comedi driver for ADLink 6208 series cards
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
-    Hardware driver for ADLink 6208 series cards:
-	card	     | voltage output    | current output
-	-------------+-------------------+---------------
-	PCI-6208V    |  8 channels       | -
-	PCI-6216V    | 16 channels       | -
-	PCI-6208A    |  8 channels       | 8 channels
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 2000 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-*/
 /*
-Driver: adl_pci6208
-Description: ADLink PCI-6208/6216 Series Multi-channel Analog Output Cards
-Devices: (ADLink) PCI-6208 [adl_pci6208]
-	 (ADLink) PCI-6216 [adl_pci6216]
-Author: nsyeow <nsyeow@pd.jaring.my>
-Updated: Fri, 30 Jan 2004 14:44:27 +0800
-Status: untested
-
-Configuration Options: not applicable, uses PCI auto config
-
-References:
-	- ni_660x.c
-	- adl_pci9111.c		copied the entire pci setup section
-	- adl_pci9118.c
-*/
+ * Driver: adl_pci6208
+ * Description: ADLink PCI-6208/6216 Series Multi-channel Analog Output Cards
+ * Devices: (ADLink) PCI-6208 [adl_pci6208]
+ *	    (ADLink) PCI-6216 [adl_pci6216]
+ * Author: nsyeow <nsyeow@pd.jaring.my>
+ * Updated: Fri, 30 Jan 2004 14:44:27 +0800
+ * Status: untested
+ *
+ * Configuration Options: not applicable, uses PCI auto config
+ */
 
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
@@ -82,37 +73,56 @@
 	unsigned int ao_readback[PCI6208_MAX_AO_CHANNELS];
 };
 
-static int pci6208_ao_winsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+static int pci6208_ao_wait_for_data_send(struct comedi_device *dev,
+					 unsigned int timeout)
+{
+	unsigned int status;
+
+	while (timeout--) {
+		status = inw(dev->iobase + PCI6208_AO_STATUS);
+		if ((status & PCI6208_AO_STATUS_DATA_SEND) == 0)
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIME;
+}
+
+static int pci6208_ao_insn_write(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 struct comedi_insn *insn,
+				 unsigned int *data)
 {
 	struct pci6208_private *devpriv = dev->private;
-	int chan = CR_CHAN(insn->chanspec);
-	unsigned long invert = 1 << (16 - 1);
-	unsigned long value = 0;
-	unsigned short status;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int val = devpriv->ao_readback[chan];
+	int ret;
 	int i;
 
 	for (i = 0; i < insn->n; i++) {
-		value = data[i] ^ invert;
+		val = data[i];
 
-		do {
-			status = inw(dev->iobase + PCI6208_AO_STATUS);
-		} while (status & PCI6208_AO_STATUS_DATA_SEND);
+		/* D/A transfer rate is 2.2us, wait up to 10us */
+		ret = pci6208_ao_wait_for_data_send(dev, 10);
+		if (ret)
+			return ret;
 
-		outw(value, dev->iobase + PCI6208_AO_CONTROL(chan));
+		/* the hardware expects two's complement values */
+		outw(comedi_offset_munge(s, val),
+		     dev->iobase + PCI6208_AO_CONTROL(chan));
 	}
-	devpriv->ao_readback[chan] = value;
+	devpriv->ao_readback[chan] = val;
 
 	return insn->n;
 }
 
-static int pci6208_ao_rinsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+static int pci6208_ao_insn_read(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
 	struct pci6208_private *devpriv = dev->private;
-	int chan = CR_CHAN(insn->chanspec);
+	unsigned int chan = CR_CHAN(insn->chanspec);
 	int i;
 
 	for (i = 0; i < insn->n; i++)
@@ -141,15 +151,8 @@
 				struct comedi_insn *insn,
 				unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + PCI6208_DIO);
-	}
 
 	data[1] = s->state;
 
@@ -193,8 +196,8 @@
 	s->n_chan	= boardinfo->ao_chans;
 	s->maxdata	= 0xffff;
 	s->range_table	= &range_bipolar10;
-	s->insn_write	= pci6208_ao_winsn;
-	s->insn_read	= pci6208_ao_rinsn;
+	s->insn_write	= pci6208_ao_insn_write;
+	s->insn_read	= pci6208_ao_insn_read;
 
 	s = &dev->subdevices[1];
 	/* digital input subdevice */
@@ -221,10 +224,6 @@
 	val = inw(dev->iobase + PCI6208_DIO);
 	val = (val & PCI6208_DIO_DO_MASK) >> PCI6208_DIO_DO_SHIFT;
 	s->state	= val;
-	s->io_bits	= 0x0f;
-
-	dev_info(dev->class_dev, "%s: %s, I/O base=0x%04lx\n",
-		dev->driver->driver_name, dev->board_name, dev->iobase);
 
 	return 0;
 }
@@ -259,5 +258,5 @@
 module_comedi_pci_driver(adl_pci6208_driver, adl_pci6208_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for ADLink 6208 series cards");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c
index 81b7203..5617f5c 100644
--- a/drivers/staging/comedi/drivers/adl_pci7x3x.c
+++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c
@@ -112,21 +112,10 @@
 				    unsigned int *data)
 {
 	unsigned long reg = (unsigned long)s->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		outl(s->state, dev->iobase + reg);
-	}
 
-	/*
-	 * NOTE: The output register is not readable.
-	 * This returned state will not be correct until all the
-	 * outputs have been updated.
-	 */
 	data[1] = s->state;
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 78cea19..eab8da2 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -86,8 +86,6 @@
 #define PCI9111_AI_INSTANT_READ_UDELAY_US	2
 #define PCI9111_AI_INSTANT_READ_TIMEOUT		100
 
-#define PCI9111_8254_CLOCK_PERIOD_NS		500
-
 /*
  * IO address map and bit defines
  */
@@ -153,7 +151,7 @@
 	unsigned int div1;
 	unsigned int div2;
 
-	short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE];
+	unsigned short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE];
 };
 
 static void plx9050_interrupt_control(unsigned long io_base,
@@ -393,11 +391,10 @@
 
 	if (cmd->convert_src == TRIG_TIMER) {
 		tmp = cmd->convert_arg;
-		i8253_cascade_ns_to_timer_2div(PCI9111_8254_CLOCK_PERIOD_NS,
-					       &dev_private->div1,
-					       &dev_private->div2,
-					       &cmd->convert_arg,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_2MHZ,
+					  &dev_private->div1,
+					  &dev_private->div2,
+					  &cmd->convert_arg, cmd->flags);
 		if (tmp != cmd->convert_arg)
 			error++;
 	}
@@ -570,7 +567,7 @@
 			     unsigned int num_bytes,
 			     unsigned int start_chan_index)
 {
-	short *array = data;
+	unsigned short *array = data;
 	unsigned int maxdata = s->maxdata;
 	unsigned int invert = (maxdata + 1) >> 1;
 	unsigned int shift = (maxdata == 0xffff) ? 0 : 4;
@@ -813,15 +810,8 @@
 				struct comedi_insn *insn,
 				unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + PCI9111_DIO_REG);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 22196ad..9864896 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -352,12 +352,11 @@
 						 * on external start
 						 */
 	unsigned int ai_data_len;
-	short *ai_data;
-	short ao_data[2];			/* data output buffer */
+	unsigned short ao_data[2];		/* data output buffer */
 	unsigned int ai_scans;			/* number of scans to do */
 	char dma_doublebuf;			/* we can use double buffering */
 	unsigned int dma_actbuf;		/* which buffer is used now */
-	short *dmabuf_virt[2];			/*
+	unsigned short *dmabuf_virt[2];		/*
 						 * pointers to begin of
 						 * DMA buffer
 						 */
@@ -671,13 +670,12 @@
 
 static int pci9118_insn_bits_do(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data))
 		outl(s->state & 0x0f, dev->iobase + PCI9118_DO);
-	}
+
 	data[1] = s->state;
 
 	return insn->n;
@@ -701,7 +699,7 @@
 
 static unsigned int defragment_dma_buffer(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
-					  short *dma_buffer,
+					  unsigned short *dma_buffer,
 					  unsigned int num_samples)
 {
 	struct pci9118_private *devpriv = dev->private;
@@ -725,7 +723,7 @@
 
 static int move_block_from_dma(struct comedi_device *dev,
 					struct comedi_subdevice *s,
-					short *dma_buffer,
+					unsigned short *dma_buffer,
 					unsigned int num_samples)
 {
 	struct pci9118_private *devpriv = dev->private;
@@ -793,7 +791,8 @@
 	case 4:
 		if (*tim2 < this_board->ai_ns_min)
 			*tim2 = this_board->ai_ns_min;
-		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, div1, div2,
+		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base,
+					  div1, div2,
 					  tim2, flags & TRIG_ROUND_NEAREST);
 		break;
 	case 2:
@@ -925,7 +924,7 @@
 {
 	struct pci9118_private *devpriv = dev->private;
 	unsigned int i, num_samples = num_bytes / sizeof(short);
-	short *array = data;
+	unsigned short *array = data;
 
 	for (i = 0; i < num_samples; i++) {
 		if (devpriv->usedma)
@@ -945,7 +944,7 @@
 					   unsigned short int_daq)
 {
 	struct pci9118_private *devpriv = dev->private;
-	register short sampl;
+	unsigned short sampl;
 
 	s->async->events = 0;
 
@@ -1278,9 +1277,9 @@
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		tmp = cmd->scan_begin_arg;
-		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
-					  &divisor2, &cmd->scan_begin_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base,
+					  &divisor1, &divisor2,
+					  &cmd->scan_begin_arg, cmd->flags);
 		if (cmd->scan_begin_arg < this_board->ai_ns_min)
 			cmd->scan_begin_arg = this_board->ai_ns_min;
 		if (tmp != cmd->scan_begin_arg)
@@ -1289,9 +1288,9 @@
 
 	if (cmd->convert_src & (TRIG_TIMER | TRIG_NOW)) {
 		tmp = cmd->convert_arg;
-		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
-					  &divisor2, &cmd->convert_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base,
+					  &divisor1, &divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		if (cmd->convert_arg < this_board->ai_ns_min)
 			cmd->convert_arg = this_board->ai_ns_min;
 		if (tmp != cmd->convert_arg)
@@ -1613,7 +1612,6 @@
 	devpriv->ai_n_chan = cmd->chanlist_len;
 	devpriv->ai_n_scanlen = cmd->scan_end_arg;
 	devpriv->ai_chanlist = cmd->chanlist;
-	devpriv->ai_data = s->async->prealloc_buf;
 	devpriv->ai_data_len = s->async->prealloc_bufsz;
 	devpriv->ai_timer1 = 0;
 	devpriv->ai_timer2 = 0;
@@ -1987,8 +1985,8 @@
 		for (i = 0; i < 2; i++) {
 			for (pages = 4; pages >= 0; pages--) {
 				devpriv->dmabuf_virt[i] =
-				    (short *)__get_free_pages(GFP_KERNEL,
-							      pages);
+				    (unsigned short *)
+				    __get_free_pages(GFP_KERNEL, pages);
 				if (devpriv->dmabuf_virt[i])
 					break;
 			}
@@ -2075,7 +2073,6 @@
 	s->maxdata = 1;
 	s->len_chanlist = 4;
 	s->range_table = &range_digital;
-	s->io_bits = 0;		/* all bits input */
 	s->insn_bits = pci9118_insn_bits_di;
 
 	s = &dev->subdevices[3];
@@ -2085,11 +2082,10 @@
 	s->maxdata = 1;
 	s->len_chanlist = 4;
 	s->range_table = &range_digital;
-	s->io_bits = 0xf;	/* all bits output */
 	s->insn_bits = pci9118_insn_bits_do;
 
 	devpriv->valid = 1;
-	devpriv->i8254_osc_base = 250;	/* 250ns=4MHz */
+	devpriv->i8254_osc_base = I8254_OSC_BASE_4MHZ;
 	devpriv->ai_maskharderr = 0x10a;
 					/* default measure crash condition */
 	if (hw_err_mask)		/* disable some requested */
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index cdf5ba2..8150a67 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -119,7 +119,6 @@
 	int differential;	/* option 3 of comedi_config */
 	int last_channel;
 	int last_range;
-	unsigned int digital_state;
 };
 
 /*
@@ -186,23 +185,25 @@
 
 static int adq12b_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
-	struct adq12b_private *devpriv = dev->private;
-	int channel;
+	unsigned int mask;
+	unsigned int chan;
+	unsigned int val;
 
-	for (channel = 0; channel < 8; channel++)
-		if (((data[0] >> channel) & 0x01) != 0)
-			outb((((data[1] >> channel) & 0x01) << 3) | channel,
-			     dev->iobase + ADQ12B_OUTBR);
-
-	/* store information to retrieve when asked for reading */
-	if (data[0]) {
-		devpriv->digital_state &= ~data[0];
-		devpriv->digital_state |= (data[0] & data[1]);
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		for (chan = 0; chan < 8; chan++) {
+			if ((mask >> chan) & 0x01) {
+				val = (s->state >> chan) & 0x01;
+				outb((val << 3) | chan,
+				     dev->iobase + ADQ12B_OUTBR);
+			}
+		}
 	}
 
-	data[1] = devpriv->digital_state;
+	data[1] = s->state;
 
 	return insn->n;
 }
@@ -223,7 +224,6 @@
 
 	devpriv->unipolar = it->options[1];
 	devpriv->differential = it->options[2];
-	devpriv->digital_state = 0;
 	/*
 	 * initialize channel and range to -1 so we make sure we
 	 * always write at least once to the CTREG in the instruction
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index f84df46..c3fdcab 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -314,10 +314,9 @@
 	unsigned int *ai_chanlist;	/*  actaul chanlist */
 	unsigned int ai_flags;	/*  flaglist */
 	unsigned int ai_data_len;	/*  len of data buffer */
-	short *ai_data;		/*  data buffer */
 	unsigned int ai_timer1;	/*  timers */
 	unsigned int ai_timer2;
-	short ao_data[4];	/*  data output buffer */
+	unsigned short ao_data[4];	/*  data output buffer */
 	unsigned int cnt0_write_wait;	/* after a write, wait for update of the
 					 * internal state */
 };
@@ -544,18 +543,14 @@
 	return insn->n;
 }
 
-/*
-==============================================================================
-*/
 static int pci171x_insn_bits_do(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + PCI171x_DO);
-	}
+
 	data[1] = s->state;
 
 	return insn->n;
@@ -740,7 +735,7 @@
 	int m;
 #ifdef PCI171x_PARANOIDCHECK
 	const struct boardtype *this_board = comedi_board(dev);
-	short sampl;
+	unsigned short sampl;
 #endif
 
 	m = inw(dev->iobase + PCI171x_STATUS);
@@ -821,7 +816,7 @@
 	int i, j;
 #ifdef PCI171x_PARANOIDCHECK
 	const struct boardtype *this_board = comedi_board(dev);
-	int sampl;
+	unsigned short sampl;
 #endif
 
 	j = s->async->cur_chan;
@@ -1009,9 +1004,10 @@
 		} else {
 			devpriv->ai_et = 0;
 		}
-		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
-					  &divisor2, &devpriv->ai_timer1,
-					  devpriv->ai_flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base,
+					  &divisor1, &divisor2,
+					  &devpriv->ai_timer1,
+					  devpriv->ai_flags);
 		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
 		if (mode != 2) {
 			/*  start pacer */
@@ -1090,9 +1086,9 @@
 
 	if (cmd->convert_src == TRIG_TIMER) {
 		tmp = cmd->convert_arg;
-		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
-					  &divisor2, &cmd->convert_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base,
+					  &divisor1, &divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		if (cmd->convert_arg < this_board->ai_ns_min)
 			cmd->convert_arg = this_board->ai_ns_min;
 		if (tmp != cmd->convert_arg)
@@ -1125,7 +1121,6 @@
 	devpriv->ai_chanlist = cmd->chanlist;
 	devpriv->ai_flags = cmd->flags;
 	devpriv->ai_data_len = s->async->prealloc_bufsz;
-	devpriv->ai_data = s->async->prealloc_buf;
 	devpriv->ai_timer1 = 0;
 	devpriv->ai_timer2 = 0;
 
@@ -1288,7 +1283,7 @@
 			s->do_cmdtest = pci171x_ai_cmdtest;
 			s->do_cmd = pci171x_ai_cmd;
 		}
-		devpriv->i8254_osc_base = 100;	/*  100ns=10MHz */
+		devpriv->i8254_osc_base = I8254_OSC_BASE_10MHZ;
 		subdev++;
 	}
 
@@ -1320,7 +1315,6 @@
 		s->maxdata = 1;
 		s->len_chanlist = this_board->n_dichan;
 		s->range_table = &range_digital;
-		s->io_bits = 0;	/* all bits input */
 		s->insn_bits = pci171x_insn_bits_di;
 		subdev++;
 	}
@@ -1333,9 +1327,6 @@
 		s->maxdata = 1;
 		s->len_chanlist = this_board->n_dochan;
 		s->range_table = &range_digital;
-		/* all bits output */
-		s->io_bits = (1 << this_board->n_dochan) - 1;
-		s->state = 0;
 		s->insn_bits = pci171x_insn_bits_do;
 		subdev++;
 	}
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index b793d69..bd4f781 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -105,7 +105,7 @@
 
 struct pci1723_private {
 	unsigned char da_range[8];	/* D/A output range for each channel */
-	short ao_data[8];	/* data output buffer */
+	unsigned short ao_data[8];	/* data output buffer */
 };
 
 /*
@@ -205,19 +205,16 @@
 	return insn->n;
 }
 
-/*
-  digital i/o bits read/write
-*/
 static int pci1723_dio_insn_bits(struct comedi_device *dev,
 				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+				 struct comedi_insn *insn,
+				 unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + PCI1723_WRITE_DIGITAL_OUTPUT_CMD);
-	}
+
 	data[1] = inw(dev->iobase + PCI1723_READ_DIGITAL_INPUT_DATA);
+
 	return insn->n;
 }
 
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index f091fa0..6bac665 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -448,45 +448,39 @@
 	return insn->n;
 }
 
-/*
-==============================================================================
-*/
 static int pci_dio_insn_bits_do_b(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
 	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
 	int i;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data)) {
 		for (i = 0; i < d->regs; i++)
 			outb((s->state >> (8 * i)) & 0xff,
 			     dev->iobase + d->addr + i);
 	}
+
 	data[1] = s->state;
 
 	return insn->n;
 }
 
-/*
-==============================================================================
-*/
 static int pci_dio_insn_bits_do_w(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
 	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
 	int i;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data)) {
 		for (i = 0; i < d->regs; i++)
 			outw((s->state >> (16 * i)) & 0xffff,
 			     dev->iobase + d->addr + 2 * i);
 	}
+
 	data[1] = s->state;
 
 	return insn->n;
@@ -641,12 +635,10 @@
 	return insn->n;
 }
 
-/*
-==============================================================================
-*/
 static int pci1760_insn_bits_do(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
 	int ret;
 	unsigned char omb[4] = {
@@ -657,14 +649,13 @@
 	};
 	unsigned char imb[4];
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data)) {
 		omb[0] = s->state;
 		ret = pci1760_mbxrequest(dev, omb, imb);
 		if (!ret)
 			return ret;
 	}
+
 	data[1] = s->state;
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c
index afe87cc..22b3dda 100644
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@@ -45,9 +45,7 @@
 					   struct comedi_insn *insn,
 					   unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
+	if (comedi_dio_update_state(s, data)) {
 		outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7);
 		outb((s->state >> 8) & 0xff,
 		     dev->iobase + AIO_IIRO_16_RELAY_8_15);
diff --git a/drivers/staging/comedi/drivers/amplc_dio200_common.c b/drivers/staging/comedi/drivers/amplc_dio200_common.c
index c1f723e..2e4bf28 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200_common.c
@@ -941,31 +941,34 @@
 	dio200_write8(dev, subpriv->ofs + 3, config);
 }
 
-/*
- * Handle 'insn_bits' for an '8255' DIO subdevice.
- */
 static int dio200_subdev_8255_bits(struct comedi_device *dev,
 				   struct comedi_subdevice *s,
-				   struct comedi_insn *insn, unsigned int *data)
+				   struct comedi_insn *insn,
+				   unsigned int *data)
 {
 	struct dio200_subdev_8255 *subpriv = s->private;
+	unsigned int mask;
+	unsigned int val;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-		if (data[0] & 0xff)
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		if (mask & 0xff)
 			dio200_write8(dev, subpriv->ofs, s->state & 0xff);
-		if (data[0] & 0xff00)
+		if (mask & 0xff00)
 			dio200_write8(dev, subpriv->ofs + 1,
 				      (s->state >> 8) & 0xff);
-		if (data[0] & 0xff0000)
+		if (mask & 0xff0000)
 			dio200_write8(dev, subpriv->ofs + 2,
 				      (s->state >> 16) & 0xff);
 	}
-	data[1] = dio200_read8(dev, subpriv->ofs);
-	data[1] |= dio200_read8(dev, subpriv->ofs + 1) << 8;
-	data[1] |= dio200_read8(dev, subpriv->ofs + 2) << 16;
-	return 2;
+
+	val = dio200_read8(dev, subpriv->ofs);
+	val |= dio200_read8(dev, subpriv->ofs + 1) << 8;
+	val |= dio200_read8(dev, subpriv->ofs + 2) << 16;
+
+	data[1] = val;
+
+	return insn->n;
 }
 
 /*
@@ -1022,8 +1025,6 @@
 	s->maxdata = 1;
 	s->insn_bits = dio200_subdev_8255_bits;
 	s->insn_config = dio200_subdev_8255_config;
-	s->state = 0;
-	s->io_bits = 0;
 	dio200_subdev_8255_set_dir(dev, s);
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index e710804..5b4b5ab 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -57,17 +57,16 @@
 
 static int pc263_do_insn_bits(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data)
+			      struct comedi_insn *insn,
+			      unsigned int *data)
 {
-	/* The insn data is a mask in data[0] and the new data
-	 * in data[1], each channel cooresponding to a bit. */
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		/* Write out the new digital output lines */
-		outb(s->state & 0xFF, dev->iobase);
-		outb(s->state >> 8, dev->iobase + 1);
+	if (comedi_dio_update_state(s, data)) {
+		outb(s->state & 0xff, dev->iobase);
+		outb((s->state >> 8) & 0xff, dev->iobase + 1);
 	}
+
+	data[1] = s->state;
+
 	return insn->n;
 }
 
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index 179de53..810e397 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -215,12 +215,6 @@
 #define CLK_EXT		7	/* external clock */
 /* Macro to construct clock input configuration register value. */
 #define CLK_CONFIG(chan, src)	((((chan) & 3) << 3) | ((src) & 7))
-/* Timebases in ns. */
-#define TIMEBASE_10MHZ		100
-#define TIMEBASE_1MHZ		1000
-#define TIMEBASE_100KHZ		10000
-#define TIMEBASE_10KHZ		100000
-#define TIMEBASE_1KHZ		1000000
 
 /*
  * Counter/timer gate input configuration sources.
@@ -379,7 +373,7 @@
 	unsigned long state;
 	spinlock_t ao_spinlock;
 	unsigned int *ao_readback;
-	short *ao_scan_vals;
+	unsigned short *ao_scan_vals;
 	unsigned char *ao_scan_order;
 	int intr_cpuid;
 	short intr_running;
@@ -843,26 +837,26 @@
 		switch (round_mode) {
 		case TRIG_ROUND_NEAREST:
 		default:
-			round = TIMEBASE_10MHZ / 2;
+			round = I8254_OSC_BASE_10MHZ / 2;
 			break;
 		case TRIG_ROUND_DOWN:
 			round = 0;
 			break;
 		case TRIG_ROUND_UP:
-			round = TIMEBASE_10MHZ - 1;
+			round = I8254_OSC_BASE_10MHZ - 1;
 			break;
 		}
 		/* Be careful to avoid overflow! */
-		div2 = cmd->scan_begin_arg / TIMEBASE_10MHZ;
-		div2 += (round + cmd->scan_begin_arg % TIMEBASE_10MHZ) /
-		    TIMEBASE_10MHZ;
+		div2 = cmd->scan_begin_arg / I8254_OSC_BASE_10MHZ;
+		div2 += (round + cmd->scan_begin_arg % I8254_OSC_BASE_10MHZ) /
+			I8254_OSC_BASE_10MHZ;
 		if (div2 <= 0x10000) {
 			/* A single timer will suffice. */
 			if (div2 < 2)
 				div2 = 2;
-			cmd->scan_begin_arg = div2 * TIMEBASE_10MHZ;
+			cmd->scan_begin_arg = div2 * I8254_OSC_BASE_10MHZ;
 			if (cmd->scan_begin_arg < div2 ||
-			    cmd->scan_begin_arg < TIMEBASE_10MHZ) {
+			    cmd->scan_begin_arg < I8254_OSC_BASE_10MHZ) {
 				/* Overflow! */
 				cmd->scan_begin_arg = MAX_SCAN_PERIOD;
 			}
@@ -870,7 +864,8 @@
 			/* Use two timers. */
 			div1 = devpriv->cached_div1;
 			div2 = devpriv->cached_div2;
-			pci224_cascade_ns_to_timer(TIMEBASE_10MHZ, &div1, &div2,
+			pci224_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+						   &div1, &div2,
 						   &cmd->scan_begin_arg,
 						   round_mode);
 			devpriv->cached_div1 = div1;
@@ -1002,19 +997,19 @@
 		switch (round_mode) {
 		case TRIG_ROUND_NEAREST:
 		default:
-			round = TIMEBASE_10MHZ / 2;
+			round = I8254_OSC_BASE_10MHZ / 2;
 			break;
 		case TRIG_ROUND_DOWN:
 			round = 0;
 			break;
 		case TRIG_ROUND_UP:
-			round = TIMEBASE_10MHZ - 1;
+			round = I8254_OSC_BASE_10MHZ - 1;
 			break;
 		}
 		/* Be careful to avoid overflow! */
-		div2 = cmd->scan_begin_arg / TIMEBASE_10MHZ;
-		div2 += (round + cmd->scan_begin_arg % TIMEBASE_10MHZ) /
-		    TIMEBASE_10MHZ;
+		div2 = cmd->scan_begin_arg / I8254_OSC_BASE_10MHZ;
+		div2 += (round + cmd->scan_begin_arg % I8254_OSC_BASE_10MHZ) /
+			I8254_OSC_BASE_10MHZ;
 		if (div2 <= 0x10000) {
 			/* A single timer will suffice. */
 			if (div2 < 2)
@@ -1025,7 +1020,8 @@
 			/* Use two timers. */
 			div1 = devpriv->cached_div1;
 			div2 = devpriv->cached_div2;
-			pci224_cascade_ns_to_timer(TIMEBASE_10MHZ, &div1, &div2,
+			pci224_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+						   &div1, &div2,
 						   &ns, round_mode);
 		}
 
@@ -1116,7 +1112,7 @@
 	const struct pci224_board *thisboard = comedi_board(dev);
 	struct pci224_private *devpriv = dev->private;
 	struct comedi_async *async = s->async;
-	short *array = data;
+	unsigned short *array = data;
 	unsigned int length = num_bytes / sizeof(*array);
 	unsigned int offset;
 	unsigned int shift;
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 43059c2..a97bbd6 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -573,14 +573,14 @@
 /* PCI230 daccon bipolar flag for each analogue output range. */
 static const unsigned char pci230_ao_bipolar[2] = { 0, 1 };
 
-static short pci230_ai_read(struct comedi_device *dev)
+static unsigned short pci230_ai_read(struct comedi_device *dev)
 {
 	const struct pci230_board *thisboard = comedi_board(dev);
 	struct pci230_private *devpriv = dev->private;
-	short data;
+	unsigned short data;
 
 	/* Read sample. */
-	data = (short)inw(dev->iobase + PCI230_ADCDATA);
+	data = inw(dev->iobase + PCI230_ADCDATA);
 	/* PCI230 is 12 bit - stored in upper bits of 16 bit register (lower
 	 * four bits reserved for expansion). */
 	/* PCI230+ is 16 bit AI. */
@@ -595,7 +595,7 @@
 }
 
 static inline unsigned short pci230_ao_mangle_datum(struct comedi_device *dev,
-						    short datum)
+						    unsigned short datum)
 {
 	const struct pci230_board *thisboard = comedi_board(dev);
 	struct pci230_private *devpriv = dev->private;
@@ -609,11 +609,12 @@
 	 * four bits reserved for expansion). */
 	/* PCI230+ is also 12 bit AO. */
 	datum <<= (16 - thisboard->ao_bits);
-	return (unsigned short)datum;
+	return datum;
 }
 
 static inline void pci230_ao_write_nofifo(struct comedi_device *dev,
-					  short datum, unsigned int chan)
+					  unsigned short datum,
+					  unsigned int chan)
 {
 	struct pci230_private *devpriv = dev->private;
 
@@ -627,8 +628,8 @@
 								PCI230_DACOUT2));
 }
 
-static inline void pci230_ao_write_fifo(struct comedi_device *dev, short datum,
-					unsigned int chan)
+static inline void pci230_ao_write_fifo(struct comedi_device *dev,
+					unsigned short datum, unsigned int chan)
 {
 	struct pci230_private *devpriv = dev->private;
 
@@ -1165,7 +1166,7 @@
 				    struct comedi_subdevice *s)
 {
 	struct pci230_private *devpriv = dev->private;
-	short data;
+	unsigned short data;
 	int i, ret;
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -1258,7 +1259,7 @@
 		/* Process scans. */
 		for (n = 0; n < num_scans; n++) {
 			for (i = 0; i < cmd->chanlist_len; i++) {
-				short datum;
+				unsigned short datum;
 
 				comedi_buf_get(async, &datum);
 				pci230_ao_write_fifo(dev, datum,
diff --git a/drivers/staging/comedi/drivers/amplc_pci263.c b/drivers/staging/comedi/drivers/amplc_pci263.c
index 145bb48..4bd4ef8 100644
--- a/drivers/staging/comedi/drivers/amplc_pci263.c
+++ b/drivers/staging/comedi/drivers/amplc_pci263.c
@@ -44,17 +44,16 @@
 
 static int pci263_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
-	/* The insn data is a mask in data[0] and the new data
-	 * in data[1], each channel cooresponding to a bit. */
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		/* Write out the new digital output lines */
-		outb(s->state & 0xFF, dev->iobase);
-		outb(s->state >> 8, dev->iobase + 1);
+	if (comedi_dio_update_state(s, data)) {
+		outb(s->state & 0xff, dev->iobase);
+		outb((s->state >> 8) & 0xff, dev->iobase + 1);
 	}
+
+	data[1] = s->state;
+
 	return insn->n;
 }
 
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 0ce93da..64d5f29 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -234,9 +234,9 @@
 		unsigned int div1 = 0, div2 = 0;
 
 		tmp = cmd->scan_begin_arg;
-		i8253_cascade_ns_to_timer(100, &div1, &div2,
-					  &cmd->scan_begin_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+					  &div1, &div2,
+					  &cmd->scan_begin_arg, cmd->flags);
 		if (tmp != cmd->scan_begin_arg)
 			err++;
 	}
@@ -244,9 +244,9 @@
 		unsigned int div1 = 0, div2 = 0;
 
 		tmp = cmd->convert_arg;
-		i8253_cascade_ns_to_timer(100, &div1, &div2,
-					  &cmd->scan_begin_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+					  &div1, &div2,
+					  &cmd->scan_begin_arg, cmd->flags);
 		if (tmp != cmd->convert_arg)
 			err++;
 		if (cmd->scan_begin_src == TRIG_TIMER &&
@@ -325,14 +325,11 @@
 
 static int das16cs_dio_insn_bits(struct comedi_device *dev,
 				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+				 struct comedi_insn *insn,
+				 unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + DAS16CS_DIO);
-	}
 
 	data[1] = inw(dev->iobase + DAS16CS_DIO);
 
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 41d89ee..e72a403 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -73,7 +73,6 @@
 #include "amcc_s5933.h"
 #include "comedi_fc.h"
 
-#define TIMER_BASE		100	/* 10MHz master clock */
 #define AI_BUFFER_SIZE		1024	/* max ai fifo size */
 #define AO_BUFFER_SIZE		1024	/* max ao fifo size */
 #define NUM_CHANNELS_8800	8
@@ -358,15 +357,15 @@
 	unsigned int s5933_intcsr_bits;
 	unsigned int ao_control_bits;
 	/* fifo buffers */
-	short ai_buffer[AI_BUFFER_SIZE];
-	short ao_buffer[AO_BUFFER_SIZE];
+	unsigned short ai_buffer[AI_BUFFER_SIZE];
+	unsigned short ao_buffer[AO_BUFFER_SIZE];
 	/* divisors of master clock for analog output pacing */
 	unsigned int ao_divisor1;
 	unsigned int ao_divisor2;
 	/* number of analog output samples remaining */
 	unsigned int ao_count;
 	/* cached values for readback */
-	int ao_value[2];
+	unsigned short ao_value[2];
 	unsigned int caldac_value[NUM_CHANNELS_8800];
 	unsigned int trimpot_value[NUM_CHANNELS_8402];
 	unsigned int dac08_value;
@@ -880,21 +879,19 @@
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		tmp = cmd->scan_begin_arg;
-		i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-					       &(devpriv->divisor1),
-					       &(devpriv->divisor2),
-					       &(cmd->scan_begin_arg),
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &cmd->scan_begin_arg, cmd->flags);
 		if (tmp != cmd->scan_begin_arg)
 			err++;
 	}
 	if (cmd->convert_src == TRIG_TIMER) {
 		tmp = cmd->convert_arg;
-		i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-					       &(devpriv->divisor1),
-					       &(devpriv->divisor2),
-					       &(cmd->convert_arg),
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		if (tmp != cmd->convert_arg)
 			err++;
 	}
@@ -932,9 +929,9 @@
 {
 	struct cb_pcidas_private *devpriv = dev->private;
 
-	i8253_cascade_ns_to_timer_2div(TIMER_BASE, &(devpriv->divisor1),
-				       &(devpriv->divisor2), ns,
-				       rounding_flags & TRIG_ROUND_MASK);
+	i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+				  &devpriv->divisor1, &devpriv->divisor2,
+				  ns, rounding_flags);
 
 	/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
 	i8254_load(devpriv->pacer_counter_dio + ADC8254, 0, 1,
@@ -1084,11 +1081,10 @@
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		tmp = cmd->scan_begin_arg;
-		i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-					       &(devpriv->ao_divisor1),
-					       &(devpriv->ao_divisor2),
-					       &(cmd->scan_begin_arg),
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+					  &devpriv->ao_divisor1,
+					  &devpriv->ao_divisor2,
+					  &cmd->scan_begin_arg, cmd->flags);
 		if (tmp != cmd->scan_begin_arg)
 			err++;
 	}
@@ -1209,11 +1205,10 @@
 
 	/*  load counters */
 	if (cmd->scan_begin_src == TRIG_TIMER) {
-		i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-					       &(devpriv->ao_divisor1),
-					       &(devpriv->ao_divisor2),
-					       &(cmd->scan_begin_arg),
-					       cmd->flags);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+					  &devpriv->ao_divisor1,
+					  &devpriv->ao_divisor2,
+					  &cmd->scan_begin_arg, cmd->flags);
 
 		/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
 		i8254_load(devpriv->pacer_counter_dio + DAC8254, 0, 1,
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 388dbd7..ff52065 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1137,7 +1137,7 @@
 	volatile short ai_cmd_running;
 	unsigned int ai_fifo_segment_length;
 	struct ext_clock_info ext_clock;
-	short ao_bounce_buffer[DAC_FIFO_SIZE];
+	unsigned short ao_bounce_buffer[DAC_FIFO_SIZE];
 };
 
 static unsigned int ai_range_bits_6xxx(const struct comedi_device *dev,
@@ -3490,18 +3490,15 @@
 	return insn->n;
 }
 
-static int do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
-		    struct comedi_insn *insn, unsigned int *data)
+static int do_wbits(struct comedi_device *dev,
+		    struct comedi_subdevice *s,
+		    struct comedi_insn *insn,
+		    unsigned int *data)
 {
 	struct pcidas64_private *devpriv = dev->private;
 
-	data[0] &= 0xf;
-	/*  zero bits we are going to change */
-	s->state &= ~data[0];
-	/*  set new bits */
-	s->state |= data[0] & data[1];
-
-	writeb(s->state, devpriv->dio_counter_iobase + DO_REG);
+	if (comedi_dio_update_state(s, data))
+		writeb(s->state, devpriv->dio_counter_iobase + DO_REG);
 
 	data[1] = s->state;
 
@@ -3526,14 +3523,14 @@
 	return insn->n;
 }
 
-static int dio_60xx_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
+static int dio_60xx_wbits(struct comedi_device *dev,
+			  struct comedi_subdevice *s,
+			  struct comedi_insn *insn,
+			  unsigned int *data)
 {
 	struct pcidas64_private *devpriv = dev->private;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data)) {
 		writeb(s->state,
 		       devpriv->dio_counter_iobase + DIO_DATA_60XX_REG);
 	}
diff --git a/drivers/staging/comedi/drivers/comedi_fc.h b/drivers/staging/comedi/drivers/comedi_fc.h
index a4dea7c..8558b07 100644
--- a/drivers/staging/comedi/drivers/comedi_fc.h
+++ b/drivers/staging/comedi/drivers/comedi_fc.h
@@ -30,7 +30,7 @@
 					      unsigned int num_bytes);
 
 static inline unsigned int cfc_write_to_buffer(struct comedi_subdevice *subd,
-					       short data)
+					       unsigned short data)
 {
 	return cfc_write_array_to_buffer(subd, &data, sizeof(data));
 };
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index f28a15f..9de81c7 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -1,168 +1,153 @@
 /*
-    comedi/drivers/comedi_parport.c
-    hardware driver for standard parallel port
+ * comedi_parport.c
+ * Comedi driver for standard parallel port
+ *
+ * For more information see:
+ *	http://retired.beyondlogic.org/spp/parallel.htm
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1998,2001 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 1998,2001 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-*/
 /*
-Driver: comedi_parport
-Description: Standard PC parallel port
-Author: ds
-Status: works in immediate mode
-Devices: [standard] parallel port (comedi_parport)
-Updated: Tue, 30 Apr 2002 21:11:45 -0700
-
-A cheap and easy way to get a few more digital I/O lines.  Steal
-additional parallel ports from old computers or your neighbors'
-computers.
-
-Option list:
- 0: I/O port base for the parallel port.
- 1: IRQ
-
-Parallel Port Lines:
-
-pin     subdev  chan    aka
----     ------  ----    ---
-1       2       0       strobe
-2       0       0       data 0
-3       0       1       data 1
-4       0       2       data 2
-5       0       3       data 3
-6       0       4       data 4
-7       0       5       data 5
-8       0       6       data 6
-9       0       7       data 7
-10      1       3       acknowledge
-11      1       4       busy
-12      1       2       output
-13      1       1       printer selected
-14      2       1       auto LF
-15      1       0       error
-16      2       2       init
-17      2       3       select printer
-18-25   ground
-
-Notes:
-
-Subdevices 0 is digital I/O, subdevice 1 is digital input, and
-subdevice 2 is digital output.  Unlike other Comedi devices,
-subdevice 0 defaults to output.
-
-Pins 13 and 14 are inverted once by Comedi and once by the
-hardware, thus cancelling the effect.
-
-Pin 1 is a strobe, thus acts like one.  There's no way in software
-to change this, at least on a standard parallel port.
-
-Subdevice 3 pretends to be a digital input subdevice, but it always
-returns 0 when read.  However, if you run a command with
-scan_begin_src=TRIG_EXT, it uses pin 10 as a external triggering
-pin, which can be used to wake up tasks.
-*/
-/*
-   see http://www.beyondlogic.org/ for information.
-   or http://www.linux-magazin.de/ausgabe/1999/10/IO/io.html
+ * Driver: comedi_parport
+ * Description: Standard PC parallel port
+ * Author: ds
+ * Status: works in immediate mode
+ * Devices: (standard) parallel port [comedi_parport]
+ * Updated: Tue, 30 Apr 2002 21:11:45 -0700
+ *
+ * A cheap and easy way to get a few more digital I/O lines. Steal
+ * additional parallel ports from old computers or your neighbors'
+ * computers.
+ *
+ * Option list:
+ *   0: I/O port base for the parallel port.
+ *   1: IRQ (optional)
+ *
+ * Parallel Port Lines:
+ *
+ *	 pin   subdev  chan  type  name
+ *	-----  ------  ----  ----  --------------
+ *	  1      2       0    DO   strobe
+ *	  2      0       0    DIO  data 0
+ *	  3      0       1    DIO  data 1
+ *	  4      0       2    DIO  data 2
+ *	  5      0       3    DIO  data 3
+ *	  6      0       4    DIO  data 4
+ *	  7      0       5    DIO  data 5
+ *	  8      0       6    DIO  data 6
+ *	  9      0       7    DIO  data 7
+ *	 10      1       3    DI   ack
+ *	 11      1       4    DI   busy
+ *	 12      1       2    DI   paper out
+ *	 13      1       1    DI   select in
+ *	 14      2       1    DO   auto LF
+ *	 15      1       0    DI   error
+ *	 16      2       2    DO   init
+ *	 17      2       3    DO   select printer
+ *	18-25                      ground
+ *
+ * When an IRQ is configured subdevice 3 pretends to be a digital
+ * input subdevice, but it always returns 0 when read. However, if
+ * you run a command with scan_begin_src=TRIG_EXT, it uses pin 10
+ * as a external trigger, which can be used to wake up tasks.
  */
 
 #include <linux/module.h>
-#include "../comedidev.h"
 #include <linux/interrupt.h>
 
+#include "../comedidev.h"
+
 #include "comedi_fc.h"
 
-#define PARPORT_SIZE 3
+/*
+ * Register map
+ */
+#define PARPORT_DATA_REG	0x00
+#define PARPORT_STATUS_REG	0x01
+#define PARPORT_CTRL_REG	0x02
+#define PARPORT_CTRL_IRQ_ENA	(1 << 4)
+#define PARPORT_CTRL_BIDIR_ENA	(1 << 5)
 
-#define PARPORT_A 0
-#define PARPORT_B 1
-#define PARPORT_C 2
-
-struct parport_private {
-	unsigned int a_data;
-	unsigned int c_data;
-	int enable_irq;
-};
-
-static int parport_insn_a(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
+static int parport_data_reg_insn_bits(struct comedi_device *dev,
+				      struct comedi_subdevice *s,
+				      struct comedi_insn *insn,
+				      unsigned int *data)
 {
-	struct parport_private *devpriv = dev->private;
+	if (comedi_dio_update_state(s, data))
+		outb(s->state, dev->iobase + PARPORT_DATA_REG);
 
-	if (data[0]) {
-		devpriv->a_data &= ~data[0];
-		devpriv->a_data |= (data[0] & data[1]);
-
-		outb(devpriv->a_data, dev->iobase + PARPORT_A);
-	}
-
-	data[1] = inb(dev->iobase + PARPORT_A);
+	data[1] = inb(dev->iobase + PARPORT_DATA_REG);
 
 	return insn->n;
 }
 
-static int parport_insn_config_a(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+static int parport_data_reg_insn_config(struct comedi_device *dev,
+					struct comedi_subdevice *s,
+					struct comedi_insn *insn,
+					unsigned int *data)
 {
-	struct parport_private *devpriv = dev->private;
+	unsigned int ctrl;
+	int ret;
 
-	if (data[0]) {
-		s->io_bits = 0xff;
-		devpriv->c_data &= ~(1 << 5);
-	} else {
-		s->io_bits = 0;
-		devpriv->c_data |= (1 << 5);
-	}
-	outb(devpriv->c_data, dev->iobase + PARPORT_C);
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0xff);
+	if (ret)
+		return ret;
 
-	return 1;
-}
-
-static int parport_insn_b(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
-{
-	if (data[0]) {
-		/* should writes be ignored? */
-		/* anyone??? */
-	}
-
-	data[1] = (inb(dev->iobase + PARPORT_B) >> 3);
+	ctrl = inb(dev->iobase + PARPORT_CTRL_REG);
+	if (s->io_bits)
+		ctrl &= ~PARPORT_CTRL_BIDIR_ENA;
+	else
+		ctrl |= PARPORT_CTRL_BIDIR_ENA;
+	outb(ctrl, dev->iobase + PARPORT_CTRL_REG);
 
 	return insn->n;
 }
 
-static int parport_insn_c(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
+static int parport_status_reg_insn_bits(struct comedi_device *dev,
+					struct comedi_subdevice *s,
+					struct comedi_insn *insn,
+					unsigned int *data)
 {
-	struct parport_private *devpriv = dev->private;
-
-	data[0] &= 0x0f;
-	if (data[0]) {
-		devpriv->c_data &= ~data[0];
-		devpriv->c_data |= (data[0] & data[1]);
-
-		outb(devpriv->c_data, dev->iobase + PARPORT_C);
-	}
-
-	data[1] = devpriv->c_data & 0xf;
+	data[1] = inb(dev->iobase + PARPORT_STATUS_REG) >> 3;
 
 	return insn->n;
 }
 
-static int parport_intr_insn(struct comedi_device *dev,
-			     struct comedi_subdevice *s,
-			     struct comedi_insn *insn, unsigned int *data)
+static int parport_ctrl_reg_insn_bits(struct comedi_device *dev,
+				      struct comedi_subdevice *s,
+				      struct comedi_insn *insn,
+				      unsigned int *data)
+{
+	unsigned int ctrl;
+
+	if (comedi_dio_update_state(s, data)) {
+		ctrl = inb(dev->iobase + PARPORT_CTRL_REG);
+		ctrl &= (PARPORT_CTRL_IRQ_ENA | PARPORT_CTRL_BIDIR_ENA);
+		ctrl |= s->state;
+		outb(ctrl, dev->iobase + PARPORT_CTRL_REG);
+	}
+
+	data[1] = s->state;
+
+	return insn->n;
+}
+
+static int parport_intr_insn_bits(struct comedi_device *dev,
+				  struct comedi_subdevice *s,
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
 	data[1] = 0;
 	return insn->n;
@@ -213,12 +198,11 @@
 static int parport_intr_cmd(struct comedi_device *dev,
 			    struct comedi_subdevice *s)
 {
-	struct parport_private *devpriv = dev->private;
+	unsigned int ctrl;
 
-	devpriv->c_data |= 0x10;
-	outb(devpriv->c_data, dev->iobase + PARPORT_C);
-
-	devpriv->enable_irq = 1;
+	ctrl = inb(dev->iobase + PARPORT_CTRL_REG);
+	ctrl |= PARPORT_CTRL_IRQ_ENA;
+	outb(ctrl, dev->iobase + PARPORT_CTRL_REG);
 
 	return 0;
 }
@@ -226,12 +210,11 @@
 static int parport_intr_cancel(struct comedi_device *dev,
 			       struct comedi_subdevice *s)
 {
-	struct parport_private *devpriv = dev->private;
+	unsigned int ctrl;
 
-	devpriv->c_data &= ~0x10;
-	outb(devpriv->c_data, dev->iobase + PARPORT_C);
-
-	devpriv->enable_irq = 0;
+	ctrl = inb(dev->iobase + PARPORT_CTRL_REG);
+	ctrl &= ~PARPORT_CTRL_IRQ_ENA;
+	outb(ctrl, dev->iobase + PARPORT_CTRL_REG);
 
 	return 0;
 }
@@ -239,10 +222,11 @@
 static irqreturn_t parport_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	struct parport_private *devpriv = dev->private;
-	struct comedi_subdevice *s = &dev->subdevices[3];
+	struct comedi_subdevice *s = dev->read_subdev;
+	unsigned int ctrl;
 
-	if (!devpriv->enable_irq)
+	ctrl = inb(dev->iobase + PARPORT_CTRL_REG);
+	if (!(ctrl & PARPORT_CTRL_IRQ_ENA))
 		return IRQ_NONE;
 
 	comedi_buf_put(s->async, 0);
@@ -255,79 +239,69 @@
 static int parport_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
-	struct parport_private *devpriv;
 	struct comedi_subdevice *s;
-	unsigned int irq;
 	int ret;
 
-	ret = comedi_request_region(dev, it->options[0], PARPORT_SIZE);
+	ret = comedi_request_region(dev, it->options[0], 0x03);
 	if (ret)
 		return ret;
 
-	irq = it->options[1];
-	if (irq) {
-		ret = request_irq(irq, parport_interrupt, 0, dev->board_name,
-				  dev);
-		if (ret < 0) {
-			dev_err(dev->class_dev, "irq not available\n");
-			return -EINVAL;
-		}
-		dev->irq = irq;
+	if (it->options[1]) {
+		ret = request_irq(it->options[1], parport_interrupt, 0,
+				  dev->board_name, dev);
+		if (ret == 0)
+			dev->irq = it->options[1];
 	}
 
-	ret = comedi_alloc_subdevices(dev, 4);
+	ret = comedi_alloc_subdevices(dev, dev->irq ? 4 : 3);
 	if (ret)
 		return ret;
 
-	devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
-	if (!devpriv)
-		return -ENOMEM;
-
+	/* Digial I/O subdevice - Parallel port DATA register */
 	s = &dev->subdevices[0];
-	s->type = COMEDI_SUBD_DIO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = 8;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = parport_insn_a;
-	s->insn_config = parport_insn_config_a;
+	s->type		= COMEDI_SUBD_DIO;
+	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
+	s->n_chan	= 8;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= parport_data_reg_insn_bits;
+	s->insn_config	= parport_data_reg_insn_config;
 
+	/* Digial Input subdevice - Parallel port STATUS register */
 	s = &dev->subdevices[1];
-	s->type = COMEDI_SUBD_DI;
-	s->subdev_flags = SDF_READABLE;
-	s->n_chan = 5;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = parport_insn_b;
+	s->type		= COMEDI_SUBD_DI;
+	s->subdev_flags	= SDF_READABLE;
+	s->n_chan	= 5;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= parport_status_reg_insn_bits;
 
+	/* Digial Output subdevice - Parallel port CONTROL register */
 	s = &dev->subdevices[2];
-	s->type = COMEDI_SUBD_DO;
-	s->subdev_flags = SDF_WRITABLE;
-	s->n_chan = 4;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = parport_insn_c;
+	s->type		= COMEDI_SUBD_DO;
+	s->subdev_flags	= SDF_WRITABLE;
+	s->n_chan	= 4;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= parport_ctrl_reg_insn_bits;
 
-	s = &dev->subdevices[3];
-	if (irq) {
+	if (dev->irq) {
+		/* Digial Input subdevice - Interrupt support */
+		s = &dev->subdevices[3];
 		dev->read_subdev = s;
-		s->type = COMEDI_SUBD_DI;
-		s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
-		s->n_chan = 1;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->insn_bits = parport_intr_insn;
-		s->do_cmdtest = parport_intr_cmdtest;
-		s->do_cmd = parport_intr_cmd;
-		s->cancel = parport_intr_cancel;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
+		s->type		= COMEDI_SUBD_DI;
+		s->subdev_flags	= SDF_READABLE | SDF_CMD_READ;
+		s->n_chan	= 1;
+		s->maxdata	= 1;
+		s->range_table	= &range_digital;
+		s->insn_bits	= parport_intr_insn_bits;
+		s->do_cmdtest	= parport_intr_cmdtest;
+		s->do_cmd	= parport_intr_cmd;
+		s->cancel	= parport_intr_cancel;
 	}
 
-	devpriv->a_data = 0;
-	outb(devpriv->a_data, dev->iobase + PARPORT_A);
-	devpriv->c_data = 0;
-	outb(devpriv->c_data, dev->iobase + PARPORT_C);
+	outb(0, dev->iobase + PARPORT_DATA_REG);
+	outb(0, dev->iobase + PARPORT_CTRL_REG);
 
 	return 0;
 }
@@ -341,5 +315,5 @@
 module_comedi_driver(parport_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi: Standard parallel port driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c
index e781716..89836c0 100644
--- a/drivers/staging/comedi/drivers/contec_pci_dio.c
+++ b/drivers/staging/comedi/drivers/contec_pci_dio.c
@@ -40,17 +40,11 @@
 
 static int contec_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + PIO1616L_DO_REG);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 5f66970..15dd33e 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -279,27 +279,23 @@
 	return insn->n;
 }
 
-static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
+static int das08_do_wbits(struct comedi_device *dev,
+			  struct comedi_subdevice *s,
+			  struct comedi_insn *insn,
+			  unsigned int *data)
 {
 	struct das08_private_struct *devpriv = dev->private;
-	int wbits;
 
-	/*  get current settings of digital output lines */
-	wbits = (devpriv->do_mux_bits >> 4) & 0xf;
-	/*  null bits we are going to set */
-	wbits &= ~data[0];
-	/*  set new bit values */
-	wbits |= data[0] & data[1];
-	/*  remember digital output bits */
-	/*  prevent race with setting of analog input mux */
-	spin_lock(&dev->spinlock);
-	devpriv->do_mux_bits &= ~DAS08_DO_MASK;
-	devpriv->do_mux_bits |= DAS08_OP(wbits);
-	outb(devpriv->do_mux_bits, dev->iobase + DAS08_CONTROL);
-	spin_unlock(&dev->spinlock);
+	if (comedi_dio_update_state(s, data)) {
+		/* prevent race with setting of analog input mux */
+		spin_lock(&dev->spinlock);
+		devpriv->do_mux_bits &= ~DAS08_DO_MASK;
+		devpriv->do_mux_bits |= DAS08_OP(s->state);
+		outb(devpriv->do_mux_bits, dev->iobase + DAS08_CONTROL);
+		spin_unlock(&dev->spinlock);
+	}
 
-	data[1] = wbits;
+	data[1] = s->state;
 
 	return insn->n;
 }
@@ -316,17 +312,13 @@
 
 static int das08jr_do_wbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+			    struct comedi_insn *insn,
+			    unsigned int *data)
 {
-	struct das08_private_struct *devpriv = dev->private;
+	if (comedi_dio_update_state(s, data))
+		outb(s->state, dev->iobase + DAS08JR_DIO);
 
-	/*  null bits we are going to set */
-	devpriv->do_bits &= ~data[0];
-	/*  set new bit values */
-	devpriv->do_bits |= data[0] & data[1];
-	outb(devpriv->do_bits, dev->iobase + DAS08JR_DIO);
-
-	data[1] = devpriv->do_bits;
+	data[1] = s->state;
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/das08.h b/drivers/staging/comedi/drivers/das08.h
index cce1b58..46a314c 100644
--- a/drivers/staging/comedi/drivers/das08.h
+++ b/drivers/staging/comedi/drivers/das08.h
@@ -41,7 +41,6 @@
 
 struct das08_private_struct {
 	unsigned int do_mux_bits;	/*  bits for do/mux register on boards without separate do register */
-	unsigned int do_bits;	/*  bits for do register on boards with register dedicated to digital out only */
 	const unsigned int *pg_gainlist;
 	unsigned int ao_readback[2];	/* assume 2 AO channels */
 };
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index 1b0793f..a8446ca 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -675,21 +675,19 @@
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		unsigned int tmp = cmd->scan_begin_arg;
 		/*  set divisors, correct timing arguments */
-		i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
-					       &devpriv->divisor1,
-					       &devpriv->divisor2,
-					       &cmd->scan_begin_arg,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(devpriv->clockbase,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &cmd->scan_begin_arg, cmd->flags);
 		err += (tmp != cmd->scan_begin_arg);
 	}
 	if (cmd->convert_src == TRIG_TIMER) {
 		unsigned int tmp = cmd->convert_arg;
 		/*  set divisors, correct timing arguments */
-		i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
-					       &devpriv->divisor1,
-					       &devpriv->divisor2,
-					       &cmd->convert_arg,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(devpriv->clockbase,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		err += (tmp != cmd->convert_arg);
 	}
 	if (err)
@@ -725,11 +723,9 @@
 	struct das16_private_struct *devpriv = dev->private;
 	unsigned long timer_base = dev->iobase + DAS16_TIMER_BASE_REG;
 
-	i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
-				       &devpriv->divisor1,
-				       &devpriv->divisor2,
-				       &ns,
-				       rounding_flags & TRIG_ROUND_MASK);
+	i8253_cascade_ns_to_timer(devpriv->clockbase,
+				  &devpriv->divisor1, &devpriv->divisor2,
+				  &ns, rounding_flags);
 
 	/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
 	i8254_load(timer_base, 0, 1, devpriv->divisor1, 2);
@@ -850,7 +846,7 @@
 			   unsigned int start_chan_index)
 {
 	unsigned int i, num_samples = num_bytes / sizeof(short);
-	short *data = array;
+	unsigned short *data = array;
 
 	for (i = 0; i < num_samples; i++) {
 		data[i] = le16_to_cpu(data[i]);
@@ -952,15 +948,8 @@
 			      struct comedi_insn *insn,
 			      unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		outb(s->state, dev->iobase + DAS16_DIO_REG);
-	}
 
 	data[1] = s->state;
 
@@ -1043,14 +1032,15 @@
 		status = inb(dev->iobase + DAS1600_STATUS_REG);
 
 		if (status & DAS1600_STATUS_CLK_10MHZ)
-			devpriv->clockbase = 100;
+			devpriv->clockbase = I8254_OSC_BASE_10MHZ;
 		else
-			devpriv->clockbase = 1000;
+			devpriv->clockbase = I8254_OSC_BASE_1MHZ;
 	} else {
 		if (it->options[3])
-			devpriv->clockbase = 1000 / it->options[3];
+			devpriv->clockbase = I8254_OSC_BASE_1MHZ /
+					     it->options[3];
 		else
-			devpriv->clockbase = 1000;	/*  1 MHz default */
+			devpriv->clockbase = I8254_OSC_BASE_1MHZ;
 	}
 
 	/* initialize dma */
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index b943c44..fce9acf 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -63,8 +63,6 @@
 #define DAS16M1_SIZE 16
 #define DAS16M1_SIZE2 8
 
-#define DAS16M1_XTAL 100	/* 10 MHz master clock */
-
 #define FIFO_SIZE 1024		/*  1024 sample fifo */
 
 /*
@@ -133,19 +131,18 @@
 	 * needed to keep track of whether new count has been loaded into
 	 * counter yet (loaded by first sample conversion) */
 	u16 initial_hw_count;
-	short ai_buffer[FIFO_SIZE];
-	unsigned int do_bits;	/*  saves status of digital output bits */
+	unsigned short ai_buffer[FIFO_SIZE];
 	unsigned int divisor1;	/*  divides master clock to obtain conversion speed */
 	unsigned int divisor2;	/*  divides master clock to obtain conversion speed */
 	unsigned long extra_iobase;
 };
 
-static inline short munge_sample(short data)
+static inline unsigned short munge_sample(unsigned short data)
 {
 	return (data >> 4) & 0xfff;
 }
 
-static void munge_sample_array(short *array, unsigned int num_elements)
+static void munge_sample_array(unsigned short *array, unsigned int num_elements)
 {
 	unsigned int i;
 
@@ -208,11 +205,10 @@
 	if (cmd->convert_src == TRIG_TIMER) {
 		tmp = cmd->convert_arg;
 		/* calculate counter values that give desired timing */
-		i8253_cascade_ns_to_timer_2div(DAS16M1_XTAL,
-					       &(devpriv->divisor1),
-					       &(devpriv->divisor2),
-					       &(cmd->convert_arg),
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_10MHZ,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		if (tmp != cmd->convert_arg)
 			err++;
 	}
@@ -251,9 +247,10 @@
 {
 	struct das16m1_private_struct *devpriv = dev->private;
 
-	i8253_cascade_ns_to_timer_2div(DAS16M1_XTAL, &(devpriv->divisor1),
-				       &(devpriv->divisor2), &ns,
-				       rounding_flags & TRIG_ROUND_MASK);
+	i8253_cascade_ns_to_timer_2div(I8254_OSC_BASE_10MHZ,
+				       &devpriv->divisor1,
+				       &devpriv->divisor2,
+				       &ns, rounding_flags);
 
 	/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
 	i8254_load(dev->iobase + DAS16M1_8254_SECOND, 0, 1, devpriv->divisor1,
@@ -393,22 +390,13 @@
 
 static int das16m1_do_wbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+			    struct comedi_insn *insn,
+			    unsigned int *data)
 {
-	struct das16m1_private_struct *devpriv = dev->private;
-	unsigned int wbits;
+	if (comedi_dio_update_state(s, data))
+		outb(s->state, dev->iobase + DAS16M1_DIO);
 
-	/*  only set bits that have been masked */
-	data[0] &= 0xf;
-	wbits = devpriv->do_bits;
-	/*  zero bits that have been masked */
-	wbits &= ~data[0];
-	/*  set masked bits */
-	wbits |= data[0] & data[1];
-	devpriv->do_bits = wbits;
-	data[1] = wbits;
-
-	outb(devpriv->do_bits, dev->iobase + DAS16M1_DIO);
+	data[1] = s->state;
 
 	return insn->n;
 }
@@ -649,7 +637,7 @@
 	outb(TOTAL_CLEAR, dev->iobase + DAS16M1_8254_FIRST_CNTRL);
 
 	/*  initialize digital output lines */
-	outb(devpriv->do_bits, dev->iobase + DAS16M1_DIO);
+	outb(0, dev->iobase + DAS16M1_DIO);
 
 	/* set the interrupt level */
 	if (dev->irq)
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 5b30029..1880038 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -108,7 +108,6 @@
 /* misc. defines */
 #define DAS1800_SIZE           16	/* uses 16 io addresses */
 #define FIFO_SIZE              1024	/*  1024 sample fifo */
-#define TIMER_BASE             200	/*  5 Mhz master clock */
 #define UNIPOLAR               0x4	/*  bit that determines whether input range is uni/bipolar */
 #define DMA_BUF_SIZE           0x1ff00	/*  size in bytes of dma buffers */
 
@@ -427,7 +426,6 @@
 	volatile unsigned int count;	/* number of data points left to be taken */
 	unsigned int divisor1;	/* value to load into board's counter 1 for timed conversions */
 	unsigned int divisor2;	/* value to load into board's counter 2 for timed conversions */
-	int do_bits;		/* digital output bits */
 	int irq_dma_bits;	/* bits for control register b */
 	/* dma bits for control register b, stored so that dma can be
 	 * turned on and off */
@@ -440,7 +438,8 @@
 	uint16_t *dma_current_buf;	/* pointer to dma buffer currently being used */
 	unsigned int dma_transfer_size;	/* size of transfer currently used, in bytes */
 	unsigned long iobase2;	/* secondary io address used for analog out on 'ao' boards */
-	short ao_update_bits;	/* remembers the last write to the 'update' dac */
+	unsigned short ao_update_bits;	/* remembers the last write to the
+					 * 'update' dac */
 };
 
 /* analog out range for 'ao' boards */
@@ -503,7 +502,7 @@
 					  struct comedi_subdevice *s)
 {
 	struct das1800_private *devpriv = dev->private;
-	short dpnt;
+	unsigned short dpnt;
 	int unipolar;
 	struct comedi_cmd *cmd = &s->async->cmd;
 
@@ -840,12 +839,11 @@
 		if (cmd->scan_begin_src == TRIG_FOLLOW) {
 			tmp_arg = cmd->convert_arg;
 			/* calculate counter values that give desired timing */
-			i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-						       &(devpriv->divisor1),
-						       &(devpriv->divisor2),
-						       &(cmd->convert_arg),
-						       cmd->
-						       flags & TRIG_ROUND_MASK);
+			i8253_cascade_ns_to_timer(I8254_OSC_BASE_5MHZ,
+						  &devpriv->divisor1,
+						  &devpriv->divisor2,
+						  &cmd->convert_arg,
+						  cmd->flags);
 			if (tmp_arg != cmd->convert_arg)
 				err++;
 		}
@@ -870,16 +868,11 @@
 				}
 				tmp_arg = cmd->scan_begin_arg;
 				/* calculate counter values that give desired timing */
-				i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-							       &(devpriv->
-								 divisor1),
-							       &(devpriv->
-								 divisor2),
-							       &(cmd->
-								 scan_begin_arg),
-							       cmd->
-							       flags &
-							       TRIG_ROUND_MASK);
+				i8253_cascade_ns_to_timer(I8254_OSC_BASE_5MHZ,
+							  &devpriv->divisor1,
+							  &devpriv->divisor2,
+							  &cmd->scan_begin_arg,
+							  cmd->flags);
 				if (tmp_arg != cmd->scan_begin_arg)
 					err++;
 			}
@@ -1011,12 +1004,10 @@
 		if (cmd->convert_src == TRIG_TIMER) {
 			/* set conversion frequency */
 			period = cmd->convert_arg;
-			i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-						       &devpriv->divisor1,
-						       &devpriv->divisor2,
-						       &period,
-						       cmd->flags &
-							TRIG_ROUND_MASK);
+			i8253_cascade_ns_to_timer(I8254_OSC_BASE_5MHZ,
+						  &devpriv->divisor1,
+						  &devpriv->divisor2,
+						  &period, cmd->flags);
 			if (das1800_set_frequency(dev) < 0)
 				return -1;
 		}
@@ -1024,9 +1015,10 @@
 	case TRIG_TIMER:	/*  in burst mode */
 		/* set scan frequency */
 		period = cmd->scan_begin_arg;
-		i8253_cascade_ns_to_timer_2div(TIMER_BASE, &devpriv->divisor1,
-					       &devpriv->divisor2, &period,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_5MHZ,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &period, cmd->flags);
 		if (das1800_set_frequency(dev) < 0)
 			return -1;
 		break;
@@ -1220,7 +1212,7 @@
 	int i, n;
 	int chan, range, aref, chan_range;
 	int timeout = 1000;
-	short dpnt;
+	unsigned short dpnt;
 	int conv_flags = 0;
 	unsigned long irq_flags;
 
@@ -1285,7 +1277,7 @@
 	int chan = CR_CHAN(insn->chanspec);
 /* int range = CR_RANGE(insn->chanspec); */
 	int update_chan = thisboard->ao_n_chan - 1;
-	short output;
+	unsigned short output;
 	unsigned long irq_flags;
 
 	/*   card expects two's complement data */
@@ -1319,24 +1311,15 @@
 	return insn->n;
 }
 
-/* writes to digital output channels */
 static int das1800_do_wbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+			    struct comedi_insn *insn,
+			    unsigned int *data)
 {
-	struct das1800_private *devpriv = dev->private;
-	unsigned int wbits;
+	if (comedi_dio_update_state(s, data))
+		outb(s->state, dev->iobase + DAS1800_DIGITAL);
 
-	/*  only set bits that have been masked */
-	data[0] &= (1 << s->n_chan) - 1;
-	wbits = devpriv->do_bits;
-	wbits &= ~data[0];
-	wbits |= data[0] & data[1];
-	devpriv->do_bits = wbits;
-
-	outb(devpriv->do_bits, dev->iobase + DAS1800_DIGITAL);
-
-	data[1] = devpriv->do_bits;
+	data[1] = s->state;
 
 	return insn->n;
 }
@@ -1644,7 +1627,7 @@
 	das1800_cancel(dev, dev->read_subdev);
 
 	/*  initialize digital out channels */
-	outb(devpriv->do_bits, dev->iobase + DAS1800_DIGITAL);
+	outb(0, dev->iobase + DAS1800_DIGITAL);
 
 	/*  initialize analog out channels */
 	if (thisboard->ao_ability == 1) {
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index 11e1611..5af0a57 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -66,7 +66,6 @@
 #include "comedi_fc.h"
 
 #define DAS800_SIZE           8
-#define TIMER_BASE            1000
 #define N_CHAN_AI             8	/*  number of analog input channels */
 
 /* Registers for the das800 */
@@ -356,11 +355,10 @@
 		int tmp = cmd->convert_arg;
 
 		/* calculate counter values that give desired timing */
-		i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-					       &devpriv->divisor1,
-					       &devpriv->divisor2,
-					       &cmd->convert_arg,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_1MHZ,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		if (tmp != cmd->convert_arg)
 			err++;
 	}
@@ -630,13 +628,9 @@
 			       unsigned int *data)
 {
 	struct das800_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 	unsigned long irq_flags;
 
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
+	if (comedi_dio_update_state(s, data)) {
 		devpriv->do_bits = s->state << 4;
 
 		spin_lock_irqsave(&dev->spinlock, irq_flags);
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 118a4fd..b04a5633 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -596,52 +596,40 @@
 
 static int dmm32at_dio_insn_bits(struct comedi_device *dev,
 				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+				 struct comedi_insn *insn,
+				 unsigned int *data)
 {
 	struct dmm32at_private *devpriv = dev->private;
-	unsigned char diobits;
+	unsigned int mask;
+	unsigned int val;
 
-	/* The insn data is a mask in data[0] and the new data
-	 * in data[1], each channel cooresponding to a bit. */
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		/* Write out the new digital output lines */
-		/* outw(s->state,dev->iobase + DMM32AT_DIO); */
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		/* get access to the DIO regs */
+		outb(DMM32AT_DIOACC, dev->iobase + DMM32AT_CNTRL);
+
+		/* if either part of dio is set for output */
+		if (((devpriv->dio_config & DMM32AT_DIRCL) == 0) ||
+		    ((devpriv->dio_config & DMM32AT_DIRCH) == 0)) {
+			val = (s->state & 0x00ff0000) >> 16;
+			outb(val, dev->iobase + DMM32AT_DIOC);
+		}
+		if ((devpriv->dio_config & DMM32AT_DIRB) == 0) {
+			val = (s->state & 0x0000ff00) >> 8;
+			outb(val, dev->iobase + DMM32AT_DIOB);
+		}
+		if ((devpriv->dio_config & DMM32AT_DIRA) == 0) {
+			val = (s->state & 0x000000ff);
+			outb(val, dev->iobase + DMM32AT_DIOA);
+		}
 	}
 
-	/* get access to the DIO regs */
-	outb(DMM32AT_DIOACC, dev->iobase + DMM32AT_CNTRL);
+	val = inb(dev->iobase + DMM32AT_DIOA);
+	val |= inb(dev->iobase + DMM32AT_DIOB) << 8;
+	val |= inb(dev->iobase + DMM32AT_DIOC) << 16;
+	s->state = val;
 
-	/* if either part of dio is set for output */
-	if (((devpriv->dio_config & DMM32AT_DIRCL) == 0) ||
-	    ((devpriv->dio_config & DMM32AT_DIRCH) == 0)) {
-		diobits = (s->state & 0x00ff0000) >> 16;
-		outb(diobits, dev->iobase + DMM32AT_DIOC);
-	}
-	if ((devpriv->dio_config & DMM32AT_DIRB) == 0) {
-		diobits = (s->state & 0x0000ff00) >> 8;
-		outb(diobits, dev->iobase + DMM32AT_DIOB);
-	}
-	if ((devpriv->dio_config & DMM32AT_DIRA) == 0) {
-		diobits = (s->state & 0x000000ff);
-		outb(diobits, dev->iobase + DMM32AT_DIOA);
-	}
-
-	/* now read the state back in */
-	s->state = inb(dev->iobase + DMM32AT_DIOC);
-	s->state <<= 8;
-	s->state |= inb(dev->iobase + DMM32AT_DIOB);
-	s->state <<= 8;
-	s->state |= inb(dev->iobase + DMM32AT_DIOA);
-	data[1] = s->state;
-
-	/* on return, data[1] contains the value of the digital
-	 * input and output lines. */
-	/* data[1]=inw(dev->iobase + DMM32AT_DIO); */
-	/* or we could just return the software copy of the output values if
-	 * it was a purely digital output subdevice */
-	/* data[1]=s->state; */
+	data[1] = val;
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
index 38918a1..811c8c5 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -260,7 +260,8 @@
 
 static int dt2801_readdata2(struct comedi_device *dev, int *data)
 {
-	int lb, hb;
+	int lb = 0;
+	int hb = 0;
 	int ret;
 
 	ret = dt2801_readdata(dev, &lb);
@@ -528,23 +529,23 @@
 
 static int dt2801_dio_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	int which = 0;
+	int which = (s == &dev->subdevices[3]) ? 1 : 0;
+	unsigned int val = 0;
 
-	if (s == &dev->subdevices[3])
-		which = 1;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data)) {
 		dt2801_writecmd(dev, DT_C_WRITE_DIG);
 		dt2801_writedata(dev, which);
 		dt2801_writedata(dev, s->state);
 	}
+
 	dt2801_writecmd(dev, DT_C_READ_DIG);
 	dt2801_writedata(dev, which);
-	dt2801_readdata(dev, data + 1);
+	dt2801_readdata(dev, &val);
+
+	data[1] = val;
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index a41a571..0ca02fa 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -353,11 +353,11 @@
 
 static int dt2811_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
-	s->state &= ~data[0];
-	s->state |= data[0] & data[1];
-	outb(s->state, dev->iobase + DT2811_DIO);
+	if (comedi_dio_update_state(s, data))
+		outb(s->state, dev->iobase + DT2811_DIO);
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/dt2817.c b/drivers/staging/comedi/drivers/dt2817.c
index f4a8529..bf58993 100644
--- a/drivers/staging/comedi/drivers/dt2817.c
+++ b/drivers/staging/comedi/drivers/dt2817.c
@@ -80,36 +80,31 @@
 
 static int dt2817_dio_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	unsigned int changed;
+	unsigned long iobase = dev->iobase + DT2817_DATA;
+	unsigned int mask;
+	unsigned int val;
 
-	/* It's questionable whether it is more important in
-	 * a driver like this to be deterministic or fast.
-	 * We choose fast. */
-
-	if (data[0]) {
-		changed = s->state;
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-		changed ^= s->state;
-		changed &= s->io_bits;
-		if (changed & 0x000000ff)
-			outb(s->state & 0xff, dev->iobase + DT2817_DATA + 0);
-		if (changed & 0x0000ff00)
-			outb((s->state >> 8) & 0xff,
-			     dev->iobase + DT2817_DATA + 1);
-		if (changed & 0x00ff0000)
-			outb((s->state >> 16) & 0xff,
-			     dev->iobase + DT2817_DATA + 2);
-		if (changed & 0xff000000)
-			outb((s->state >> 24) & 0xff,
-			     dev->iobase + DT2817_DATA + 3);
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		if (mask & 0x000000ff)
+			outb(s->state & 0xff, iobase + 0);
+		if (mask & 0x0000ff00)
+			outb((s->state >> 8) & 0xff, iobase + 1);
+		if (mask & 0x00ff0000)
+			outb((s->state >> 16) & 0xff, iobase + 2);
+		if (mask & 0xff000000)
+			outb((s->state >> 24) & 0xff, iobase + 3);
 	}
-	data[1] = inb(dev->iobase + DT2817_DATA + 0);
-	data[1] |= (inb(dev->iobase + DT2817_DATA + 1) << 8);
-	data[1] |= (inb(dev->iobase + DT2817_DATA + 2) << 16);
-	data[1] |= (inb(dev->iobase + DT2817_DATA + 3) << 24);
+
+	val = inb(iobase + 0);
+	val |= (inb(iobase + 1) << 8);
+	val |= (inb(iobase + 2) << 16);
+	val |= (inb(iobase + 3) << 24);
+
+	data[1] = val;
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index da3ee85..a01e6b5 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -226,7 +226,7 @@
 
 	const struct comedi_lrange *darangelist[2];
 
-	short ao[2];
+	unsigned short ao[2];
 
 	volatile int dacsr;	/* software copies of registers */
 	volatile int adcsr;
@@ -237,7 +237,7 @@
 
 	struct {
 		int chan;
-		short *buf;	/* DMA buffer */
+		unsigned short *buf;	/* DMA buffer */
 		volatile int size;	/* size of current transfer */
 	} dma[2];
 	int dma_maxsize;	/* max size of DMA transfer (in bytes) */
@@ -283,7 +283,7 @@
 
 static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2);
 
-static void dt282x_munge(struct comedi_device *dev, short *buf,
+static void dt282x_munge(struct comedi_device *dev, unsigned short *buf,
 			 unsigned int nbytes)
 {
 	const struct dt282x_board *board = comedi_board(dev);
@@ -496,9 +496,9 @@
 #if 0
 	if (adcsr & DT2821_ADDONE) {
 		int ret;
-		short data;
+		unsigned short data;
 
-		data = (short)inw(dev->iobase + DT2821_ADDAT);
+		data = inw(dev->iobase + DT2821_ADDAT);
 		data &= (1 << board->adbits) - 1;
 
 		if (devpriv->ad_2scomp)
@@ -796,7 +796,7 @@
 {
 	const struct dt282x_board *board = comedi_board(dev);
 	struct dt282x_private *devpriv = dev->private;
-	short d;
+	unsigned short d;
 	unsigned int chan;
 
 	chan = CR_CHAN(insn->chanspec);
@@ -967,14 +967,12 @@
 
 static int dt282x_dio_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + DT2821_DIODAT);
-	}
+
 	data[1] = inw(dev->iobase + DT2821_DIODAT);
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index 64ef875..292226e 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -331,7 +331,7 @@
 	int rear;
 	int count;
 	int i;
-	short data;
+	unsigned short data;
 
 	front = readw(devpriv->io_addr + DPR_AD_Buf_Front);
 	count = front - devpriv->ai_front;
@@ -665,13 +665,12 @@
 
 static int dt3k_dio_insn_bits(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data)
+			      struct comedi_insn *insn,
+			      unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[1] & data[0];
+	if (comedi_dio_update_state(s, data))
 		dt3k_writesingle(dev, SUBS_DOUT, 0, s->state);
-	}
+
 	data[1] = dt3k_readsingle(dev, SUBS_DIN, 0, 0);
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index b5e6f33..73af600 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -85,13 +85,9 @@
 #define F020_MASK_DACxCN_DACxEN		0x80
 
 enum {
-	/* A/D  D/A  DI  DO  CT */
-	DT9812_DEVID_DT9812_10,	/*  8    2   8   8   1  +/- 10V */
-	DT9812_DEVID_DT9812_2PT5,	/* 8    2   8   8   1  0-2.44V */
-#if 0
-	DT9812_DEVID_DT9813,	/*  16   2   4   4   1  +/- 10V */
-	DT9812_DEVID_DT9814	/*  24   2   0   0   1  +/- 10V */
-#endif
+					/* A/D  D/A  DI  DO  CT */
+	DT9812_DEVID_DT9812_10,		/*  8    2   8   8   1  +/- 10V */
+	DT9812_DEVID_DT9812_2PT5,	/*  8    2   8   8   1  0-2.44V */
 };
 
 enum dt9812_gain {
@@ -580,15 +576,8 @@
 			       struct comedi_insn *insn,
 			       unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		dt9812_digital_out(dev, s->state);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index fd525f4..f2a9f1c 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -147,33 +147,23 @@
 	return insn->n;
 }
 
-/* digital output bit interface */
 static int dyna_pci10xx_do_insn_bits(struct comedi_device *dev,
-			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data)
+				     struct comedi_subdevice *s,
+				     struct comedi_insn *insn,
+				     unsigned int *data)
 {
 	struct dyna_pci10xx_private *devpriv = dev->private;
 
-	/* The insn data is a mask in data[0] and the new data
-	 * in data[1], each channel cooresponding to a bit.
-	 * s->state contains the previous write data
-	 */
 	mutex_lock(&devpriv->mutex);
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data)) {
 		smp_mb();
 		outw_p(s->state, devpriv->BADR3);
 		udelay(10);
 	}
 
-	/*
-	 * On return, data[1] contains the value of the digital
-	 * input and output lines. We just return the software copy of the
-	 * output values if it was a purely digital output subdevice.
-	 */
 	data[1] = s->state;
 	mutex_unlock(&devpriv->mutex);
+
 	return insn->n;
 }
 
diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c
index 8d70f64..e3ff4c4 100644
--- a/drivers/staging/comedi/drivers/fl512.c
+++ b/drivers/staging/comedi/drivers/fl512.c
@@ -25,8 +25,7 @@
 
 #define FL512_SIZE 16		/* the size of the used memory */
 struct fl512_private {
-
-	short ao_readback[2];
+	unsigned short ao_readback[2];
 };
 
 static const struct comedi_lrange range_fl512 = { 4, {
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 3889d23..1e16641 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -118,9 +118,7 @@
 	unsigned char act_chanlist_len;	/*  len of scanlist */
 	unsigned char act_chanlist_pos;	/*  actual position in MUX list */
 	unsigned int *ai_chanlist;	/*  actaul chanlist */
-	short *ai_data;		/*  data buffer */
-	short ao_data[4];	/*  data output buffer */
-	short di_data;		/*  Digital input data */
+	unsigned short ao_data[4];	/*  data output buffer */
 	unsigned int do_data;	/*  Remember digital output data */
 };
 
@@ -348,18 +346,13 @@
 
 static int icp_multi_insn_bits_do(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
 	struct icp_multi_private *devpriv = dev->private;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
-		printk(KERN_DEBUG "Digital outputs = %4x \n", s->state);
-
+	if (comedi_dio_update_state(s, data))
 		writew(s->state, devpriv->io_addr + ICP_MULTI_DO);
-	}
 
 	data[1] = readw(devpriv->io_addr + ICP_MULTI_DI);
 
@@ -548,7 +541,6 @@
 	s->maxdata = 1;
 	s->len_chanlist = 16;
 	s->range_table = &range_digital;
-	s->io_bits = 0;
 	s->insn_bits = icp_multi_insn_bits_di;
 
 	s = &dev->subdevices[3];
@@ -558,8 +550,6 @@
 	s->maxdata = 1;
 	s->len_chanlist = 8;
 	s->range_table = &range_digital;
-	s->io_bits = 0xff;
-	s->state = 0;
 	s->insn_bits = icp_multi_insn_bits_do;
 
 	s = &dev->subdevices[4];
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 5c3a318..8577778 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -378,13 +378,10 @@
 			       unsigned int *data)
 {
 	struct ii20k_private *devpriv = dev->private;
-	unsigned int mask = data[0] & s->io_bits;	/* outputs only */
-	unsigned int bits = data[1];
+	unsigned int mask;
 
+	mask = comedi_dio_update_state(s, data);
 	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
 		if (mask & 0x000000ff)
 			writeb((s->state >> 0) & 0xff,
 			       devpriv->ioaddr + II20K_DIO0_REG);
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 8f4afad..3d12e91 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -427,7 +427,7 @@
 static void me4000_reset(struct comedi_device *dev)
 {
 	struct me4000_info *info = dev->private;
-	unsigned long val;
+	unsigned int val;
 	int chan;
 
 	/* Make a hardware reset */
@@ -480,9 +480,9 @@
 	int rang = CR_RANGE(insn->chanspec);
 	int aref = CR_AREF(insn->chanspec);
 
-	unsigned long entry = 0;
-	unsigned long tmp;
-	long lval;
+	unsigned int entry = 0;
+	unsigned int tmp;
+	unsigned int lval;
 
 	if (insn->n == 0) {
 		return 0;
@@ -586,7 +586,7 @@
 static int me4000_ai_cancel(struct comedi_device *dev,
 			    struct comedi_subdevice *s)
 {
-	unsigned long tmp;
+	unsigned int tmp;
 
 	/* Stop any running conversion */
 	tmp = inl(dev->iobase + ME4000_AI_CTRL_REG);
@@ -783,7 +783,7 @@
 		      unsigned int scan_ticks, unsigned int chan_ticks)
 {
 
-	unsigned long tmp = 0;
+	unsigned int tmp = 0;
 
 	/* Write timer arguments */
 	ai_write_timer(dev, init_ticks, scan_ticks, chan_ticks);
@@ -1108,7 +1108,7 @@
 	struct comedi_subdevice *s = &dev->subdevices[0];
 	int i;
 	int c = 0;
-	long lval;
+	unsigned int lval;
 
 	if (!dev->attached)
 		return IRQ_NONE;
@@ -1252,7 +1252,7 @@
 	int chan = CR_CHAN(insn->chanspec);
 	int rang = CR_RANGE(insn->chanspec);
 	int aref = CR_AREF(insn->chanspec);
-	unsigned long tmp;
+	unsigned int tmp;
 
 	if (insn->n == 0) {
 		return 0;
@@ -1313,29 +1313,12 @@
 	return 1;
 }
 
-/*=============================================================================
-  Digital I/O section
-  ===========================================================================*/
-
 static int me4000_dio_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	/*
-	 * The insn data consists of a mask in data[0] and the new data
-	 * in data[1]. The mask defines which bits we are concerning about.
-	 * The new data must be anded with the mask.
-	 * Each channel corresponds to a bit.
-	 */
-	if (data[0]) {
-		/* Check if requested ports are configured for output */
-		if ((s->io_bits & data[0]) != data[0])
-			return -EIO;
-
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-
-		/* Write out the new digital output lines */
+	if (comedi_dio_update_state(s, data)) {
 		outl((s->state >> 0) & 0xFF,
 			    dev->iobase + ME4000_DIO_PORT_0_REG);
 		outl((s->state >> 8) & 0xFF,
@@ -1346,8 +1329,6 @@
 			    dev->iobase + ME4000_DIO_PORT_3_REG);
 	}
 
-	/* On return, data[1] contains the value of
-	   the digital input and output lines. */
 	data[1] = ((inl(dev->iobase + ME4000_DIO_PORT_0_REG) & 0xFF) << 0) |
 		  ((inl(dev->iobase + ME4000_DIO_PORT_1_REG) & 0xFF) << 8) |
 		  ((inl(dev->iobase + ME4000_DIO_PORT_2_REG) & 0xFF) << 16) |
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index a6f6d4a..24ec9ef 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -222,15 +222,11 @@
 	struct me_private_data *dev_private = dev->private;
 	void __iomem *mmio_porta = dev_private->me_regbase + ME_DIO_PORT_A;
 	void __iomem *mmio_portb = dev_private->me_regbase + ME_DIO_PORT_B;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
+	unsigned int mask;
 	unsigned int val;
 
-	mask &= s->io_bits;	/* only update the COMEDI_OUTPUT channels */
+	mask = comedi_dio_update_state(s, data);
 	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
 		if (mask & 0x0000ffff)
 			writew((s->state & 0xffff), mmio_porta);
 		if (mask & 0xffff0000)
@@ -545,7 +541,6 @@
 	s->range_table	= &range_digital;
 	s->insn_bits	= me_dio_insn_bits;
 	s->insn_config	= me_dio_insn_config;
-	s->io_bits	= 0;
 
 	dev_info(dev->class_dev, "%s: %s attached\n",
 		dev->driver->driver_name, dev->board_name);
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index 9d75ea4..3ca755e 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -163,11 +163,11 @@
 
 static int multiq3_do_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	s->state &= ~data[0];
-	s->state |= (data[0] & data[1]);
-	outw(s->state, dev->iobase + MULTIQ3_DIGOUT_PORT);
+	if (comedi_dio_update_state(s, data))
+		outw(s->state, dev->iobase + MULTIQ3_DIGOUT_PORT);
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index c2745f2..85aa960 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -1,40 +1,32 @@
 /*
-    comedi/drivers/ni_6527.c
-    driver for National Instruments PCI-6527
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 1999,2002,2003 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-*/
-/*
-Driver: ni_6527
-Description: National Instruments 6527
-Author: ds
-Status: works
-Devices: [National Instruments] PCI-6527 (ni6527), PXI-6527
-Updated: Sat, 25 Jan 2003 13:24:40 -0800
-
-
-*/
-
-/*
-   Manuals (available from ftp://ftp.natinst.com/support/manuals)
-
-	370106b.pdf	6527 Register Level Programmer Manual
-
+ * ni_6527.c
+ * Comedi driver for National Instruments PCI-6527
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1999,2002,2003 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  */
 
-#define DEBUG 1
-#define DEBUG_FLAGS
+/*
+ * Driver: ni_6527
+ * Description: National Instruments 6527
+ * Devices: (National Instruments) PCI-6527 [pci-6527]
+ *          (National Instruments) PXI-6527 [pxi-6527]
+ * Author: David A. Schleef <ds@schleef.org>
+ * Updated: Sat, 25 Jan 2003 13:24:40 -0800
+ * Status: works
+ *
+ * Configuration Options: not applicable, uses PCI auto config
+ */
 
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -43,39 +35,41 @@
 #include "../comedidev.h"
 
 #include "comedi_fc.h"
-#include "mite.h"
 
-#define DRIVER_NAME "ni_6527"
-
-#define NI6527_DIO_SIZE 4096
-#define NI6527_MITE_SIZE 4096
-
-#define Port_Register(x)			(0x00+(x))
-#define ID_Register				0x06
-
-#define Clear_Register				0x07
-#define ClrEdge				0x08
-#define ClrOverflow			0x04
-#define ClrFilter			0x02
-#define ClrInterval			0x01
-
-#define Filter_Interval(x)			(0x08+(x))
-#define Filter_Enable(x)			(0x0c+(x))
-
-#define Change_Status				0x14
-#define MasterInterruptStatus		0x04
-#define Overflow			0x02
-#define EdgeStatus			0x01
-
-#define Master_Interrupt_Control		0x15
-#define FallingEdgeIntEnable		0x10
-#define RisingEdgeIntEnable		0x08
-#define MasterInterruptEnable		0x04
-#define OverflowIntEnable		0x02
-#define EdgeIntEnable			0x01
-
-#define Rising_Edge_Detection_Enable(x)		(0x018+(x))
-#define Falling_Edge_Detection_Enable(x)	(0x020+(x))
+/*
+ * PCI BAR1 - Register memory map
+ *
+ * Manuals (available from ftp://ftp.natinst.com/support/manuals)
+ *	370106b.pdf	6527 Register Level Programmer Manual
+ */
+#define NI6527_DI_REG(x)		(0x00 + (x))
+#define NI6527_DO_REG(x)		(0x03 + (x))
+#define NI6527_ID_REG			0x06
+#define NI6527_CLR_REG			0x07
+#define NI6527_CLR_EDGE			(1 << 3)
+#define NI6527_CLR_OVERFLOW		(1 << 2)
+#define NI6527_CLR_FILT			(1 << 1)
+#define NI6527_CLR_INTERVAL		(1 << 0)
+#define NI6527_CLR_IRQS			(NI6527_CLR_EDGE | NI6527_CLR_OVERFLOW)
+#define NI6527_CLR_RESET_FILT		(NI6527_CLR_FILT | NI6527_CLR_INTERVAL)
+#define NI6527_FILT_INTERVAL_REG(x)	(0x08 + (x))
+#define NI6527_FILT_ENA_REG(x)		(0x0c + (x))
+#define NI6527_STATUS_REG		0x14
+#define NI6527_STATUS_IRQ		(1 << 2)
+#define NI6527_STATUS_OVERFLOW		(1 << 1)
+#define NI6527_STATUS_EDGE		(1 << 0)
+#define NI6527_CTRL_REG			0x15
+#define NI6527_CTRL_FALLING		(1 << 4)
+#define NI6527_CTRL_RISING		(1 << 3)
+#define NI6527_CTRL_IRQ			(1 << 2)
+#define NI6527_CTRL_OVERFLOW		(1 << 1)
+#define NI6527_CTRL_EDGE		(1 << 0)
+#define NI6527_CTRL_DISABLE_IRQS	0
+#define NI6527_CTRL_ENABLE_IRQS		(NI6527_CTRL_FALLING | \
+					 NI6527_CTRL_RISING | \
+					 NI6527_CTRL_IRQ | NI6527_CTRL_EDGE)
+#define NI6527_RISING_EDGE_REG(x)	(0x18 + (x))
+#define NI6527_FALLING_EDGE_REG(x)	(0x20 + (x))
 
 enum ni6527_boardid {
 	BOARD_PCI6527,
@@ -96,96 +90,113 @@
 };
 
 struct ni6527_private {
-	struct mite_struct *mite;
+	void __iomem *mmio_base;
 	unsigned int filter_interval;
 	unsigned int filter_enable;
 };
 
-static int ni6527_di_insn_config(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+static void ni6527_set_filter_interval(struct comedi_device *dev,
+				       unsigned int val)
 {
 	struct ni6527_private *devpriv = dev->private;
-	int chan = CR_CHAN(insn->chanspec);
+	void __iomem *mmio = devpriv->mmio_base;
+
+	if (val != devpriv->filter_interval) {
+		writeb(val & 0xff, mmio + NI6527_FILT_INTERVAL_REG(0));
+		writeb((val >> 8) & 0xff, mmio + NI6527_FILT_INTERVAL_REG(1));
+		writeb((val >> 16) & 0x0f, mmio + NI6527_FILT_INTERVAL_REG(2));
+
+		writeb(NI6527_CLR_INTERVAL, mmio + NI6527_CLR_REG);
+
+		devpriv->filter_interval = val;
+	}
+}
+
+static void ni6527_set_filter_enable(struct comedi_device *dev,
+				     unsigned int val)
+{
+	struct ni6527_private *devpriv = dev->private;
+	void __iomem *mmio = devpriv->mmio_base;
+
+	writeb(val & 0xff, mmio + NI6527_FILT_ENA_REG(0));
+	writeb((val >> 8) & 0xff, mmio + NI6527_FILT_ENA_REG(1));
+	writeb((val >> 16) & 0xff, mmio + NI6527_FILT_ENA_REG(2));
+}
+
+static int ni6527_di_insn_config(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 struct comedi_insn *insn,
+				 unsigned int *data)
+{
+	struct ni6527_private *devpriv = dev->private;
+	unsigned int chan = CR_CHAN(insn->chanspec);
 	unsigned int interval;
 
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0] != INSN_CONFIG_FILTER)
-		return -EINVAL;
-
-	if (data[1]) {
+	switch (data[0]) {
+	case INSN_CONFIG_FILTER:
+		/*
+		 * The deglitch filter interval is specified in nanoseconds.
+		 * The hardware supports intervals in 200ns increments. Round
+		 * the user values up and return the actual interval.
+		 */
 		interval = (data[1] + 100) / 200;
 		data[1] = interval * 200;
 
-		if (interval != devpriv->filter_interval) {
-			writeb(interval & 0xff,
-			       devpriv->mite->daq_io_addr + Filter_Interval(0));
-			writeb((interval >> 8) & 0xff,
-			       devpriv->mite->daq_io_addr + Filter_Interval(1));
-			writeb((interval >> 16) & 0x0f,
-			       devpriv->mite->daq_io_addr + Filter_Interval(2));
-
-			writeb(ClrInterval,
-			       devpriv->mite->daq_io_addr + Clear_Register);
-
-			devpriv->filter_interval = interval;
+		if (interval) {
+			ni6527_set_filter_interval(dev, interval);
+			devpriv->filter_enable |= 1 << chan;
+		} else {
+			devpriv->filter_enable &= ~(1 << chan);
 		}
-
-		devpriv->filter_enable |= 1 << chan;
-	} else {
-		devpriv->filter_enable &= ~(1 << chan);
+		ni6527_set_filter_enable(dev, devpriv->filter_enable);
+		break;
+	default:
+		return -EINVAL;
 	}
 
-	writeb(devpriv->filter_enable,
-	       devpriv->mite->daq_io_addr + Filter_Enable(0));
-	writeb(devpriv->filter_enable >> 8,
-	       devpriv->mite->daq_io_addr + Filter_Enable(1));
-	writeb(devpriv->filter_enable >> 16,
-	       devpriv->mite->daq_io_addr + Filter_Enable(2));
-
-	return 2;
+	return insn->n;
 }
 
 static int ni6527_di_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
 	struct ni6527_private *devpriv = dev->private;
+	void __iomem *mmio = devpriv->mmio_base;
+	unsigned int val;
 
-	data[1] = readb(devpriv->mite->daq_io_addr + Port_Register(0));
-	data[1] |= readb(devpriv->mite->daq_io_addr + Port_Register(1)) << 8;
-	data[1] |= readb(devpriv->mite->daq_io_addr + Port_Register(2)) << 16;
+	val = readb(mmio + NI6527_DI_REG(0));
+	val |= (readb(mmio + NI6527_DI_REG(1)) << 8);
+	val |= (readb(mmio + NI6527_DI_REG(2)) << 16);
+
+	data[1] = val;
 
 	return insn->n;
 }
 
 static int ni6527_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
 	struct ni6527_private *devpriv = dev->private;
+	void __iomem *mmio = devpriv->mmio_base;
+	unsigned int mask;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		/* Outputs are inverted */
+		unsigned int val = s->state ^ 0xffffff;
 
-		/* The open relay state on the board cooresponds to 1,
-		 * but in Comedi, it is represented by 0. */
-		if (data[0] & 0x0000ff) {
-			writeb((s->state ^ 0xff),
-			       devpriv->mite->daq_io_addr + Port_Register(3));
-		}
-		if (data[0] & 0x00ff00) {
-			writeb((s->state >> 8) ^ 0xff,
-			       devpriv->mite->daq_io_addr + Port_Register(4));
-		}
-		if (data[0] & 0xff0000) {
-			writeb((s->state >> 16) ^ 0xff,
-			       devpriv->mite->daq_io_addr + Port_Register(5));
-		}
+		if (mask & 0x0000ff)
+			writeb(val & 0xff, mmio + NI6527_DO_REG(0));
+		if (mask & 0x00ff00)
+			writeb((val >> 8) & 0xff, mmio + NI6527_DO_REG(1));
+		if (mask & 0xff0000)
+			writeb((val >> 16) & 0xff, mmio + NI6527_DO_REG(2));
 	}
+
 	data[1] = s->state;
 
 	return insn->n;
@@ -195,21 +206,22 @@
 {
 	struct comedi_device *dev = d;
 	struct ni6527_private *devpriv = dev->private;
-	struct comedi_subdevice *s = &dev->subdevices[2];
+	struct comedi_subdevice *s = dev->read_subdev;
+	void __iomem *mmio = devpriv->mmio_base;
 	unsigned int status;
 
-	status = readb(devpriv->mite->daq_io_addr + Change_Status);
-	if ((status & MasterInterruptStatus) == 0)
-		return IRQ_NONE;
-	if ((status & EdgeStatus) == 0)
+	status = readb(mmio + NI6527_STATUS_REG);
+	if (!(status & NI6527_STATUS_IRQ))
 		return IRQ_NONE;
 
-	writeb(ClrEdge | ClrOverflow,
-	       devpriv->mite->daq_io_addr + Clear_Register);
+	if (status & NI6527_STATUS_EDGE) {
+		comedi_buf_put(s->async, 0);
+		s->async->events |= COMEDI_CB_EOS;
+		comedi_event(dev, s);
+	}
 
-	comedi_buf_put(s->async, 0);
-	s->async->events |= COMEDI_CB_EOS;
-	comedi_event(dev, s);
+	writeb(NI6527_CLR_IRQS, mmio + NI6527_CLR_REG);
+
 	return IRQ_HANDLED;
 }
 
@@ -259,13 +271,10 @@
 			   struct comedi_subdevice *s)
 {
 	struct ni6527_private *devpriv = dev->private;
-	/* struct comedi_cmd *cmd = &s->async->cmd; */
+	void __iomem *mmio = devpriv->mmio_base;
 
-	writeb(ClrEdge | ClrOverflow,
-	       devpriv->mite->daq_io_addr + Clear_Register);
-	writeb(FallingEdgeIntEnable | RisingEdgeIntEnable |
-	       MasterInterruptEnable | EdgeIntEnable,
-	       devpriv->mite->daq_io_addr + Master_Interrupt_Control);
+	writeb(NI6527_CLR_IRQS, mmio + NI6527_CLR_REG);
+	writeb(NI6527_CTRL_ENABLE_IRQS, mmio + NI6527_CTRL_REG);
 
 	return 0;
 }
@@ -274,8 +283,9 @@
 			      struct comedi_subdevice *s)
 {
 	struct ni6527_private *devpriv = dev->private;
+	void __iomem *mmio = devpriv->mmio_base;
 
-	writeb(0x00, devpriv->mite->daq_io_addr + Master_Interrupt_Control);
+	writeb(NI6527_CTRL_DISABLE_IRQS, mmio + NI6527_CTRL_REG);
 
 	return 0;
 }
@@ -288,32 +298,54 @@
 	return insn->n;
 }
 
-static int ni6527_intr_insn_config(struct comedi_device *dev,
-				   struct comedi_subdevice *s,
-				   struct comedi_insn *insn, unsigned int *data)
+static void ni6527_set_edge_detection(struct comedi_device *dev,
+				      unsigned int rising,
+				      unsigned int falling)
 {
 	struct ni6527_private *devpriv = dev->private;
+	void __iomem *mmio = devpriv->mmio_base;
 
-	if (insn->n < 1)
+	/* enable rising-edge detection channels */
+	writeb(rising & 0xff, mmio + NI6527_RISING_EDGE_REG(0));
+	writeb((rising >> 8) & 0xff, mmio + NI6527_RISING_EDGE_REG(1));
+	writeb((rising >> 16) & 0xff, mmio + NI6527_RISING_EDGE_REG(2));
+
+	/* enable falling-edge detection channels */
+	writeb(falling & 0xff, mmio + NI6527_FALLING_EDGE_REG(0));
+	writeb((falling >> 8) & 0xff, mmio + NI6527_FALLING_EDGE_REG(1));
+	writeb((falling >> 16) & 0xff, mmio + NI6527_FALLING_EDGE_REG(2));
+}
+
+static int ni6527_intr_insn_config(struct comedi_device *dev,
+				   struct comedi_subdevice *s,
+				   struct comedi_insn *insn,
+				   unsigned int *data)
+{
+	switch (data[0]) {
+	case INSN_CONFIG_CHANGE_NOTIFY:
+		/* check_insn_config_length() does not check this instruction */
+		if (insn->n != 3)
+			return -EINVAL;
+		ni6527_set_edge_detection(dev, data[1], data[2]);
+		break;
+	default:
 		return -EINVAL;
-	if (data[0] != INSN_CONFIG_CHANGE_NOTIFY)
-		return -EINVAL;
+	}
 
-	writeb(data[1],
-	       devpriv->mite->daq_io_addr + Rising_Edge_Detection_Enable(0));
-	writeb(data[1] >> 8,
-	       devpriv->mite->daq_io_addr + Rising_Edge_Detection_Enable(1));
-	writeb(data[1] >> 16,
-	       devpriv->mite->daq_io_addr + Rising_Edge_Detection_Enable(2));
+	return insn->n;
+}
 
-	writeb(data[2],
-	       devpriv->mite->daq_io_addr + Falling_Edge_Detection_Enable(0));
-	writeb(data[2] >> 8,
-	       devpriv->mite->daq_io_addr + Falling_Edge_Detection_Enable(1));
-	writeb(data[2] >> 16,
-	       devpriv->mite->daq_io_addr + Falling_Edge_Detection_Enable(2));
+static void ni6527_reset(struct comedi_device *dev)
+{
+	struct ni6527_private *devpriv = dev->private;
+	void __iomem *mmio = devpriv->mmio_base;
 
-	return 2;
+	/* disable deglitch filters on all channels */
+	ni6527_set_filter_enable(dev, 0);
+
+	writeb(NI6527_CLR_IRQS | NI6527_CLR_RESET_FILT,
+	       mmio + NI6527_CLR_REG);
+	writeb(NI6527_CTRL_DISABLE_IRQS, mmio + NI6527_CTRL_REG);
 }
 
 static int ni6527_auto_attach(struct comedi_device *dev,
@@ -332,75 +364,69 @@
 	dev->board_ptr = board;
 	dev->board_name = board->name;
 
-	ret = comedi_pci_enable(dev);
-	if (ret)
-		return ret;
-
 	devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
 	if (!devpriv)
 		return -ENOMEM;
 
-	devpriv->mite = mite_alloc(pcidev);
-	if (!devpriv->mite)
+	ret = comedi_pci_enable(dev);
+	if (ret)
+		return ret;
+
+	devpriv->mmio_base = pci_ioremap_bar(pcidev, 1);
+	if (!devpriv->mmio_base)
 		return -ENOMEM;
 
-	ret = mite_setup(devpriv->mite);
-	if (ret < 0) {
-		dev_err(dev->class_dev, "error setting up mite\n");
-		return ret;
-	}
+	/* make sure this is actually a 6527 device */
+	if (readb(devpriv->mmio_base + NI6527_ID_REG) != 0x27)
+		return -ENODEV;
 
-	dev_info(dev->class_dev, "board: %s, ID=0x%02x\n", dev->board_name,
-		 readb(devpriv->mite->daq_io_addr + ID_Register));
+	ni6527_reset(dev);
+
+	ret = request_irq(pcidev->irq, ni6527_interrupt, IRQF_SHARED,
+			  dev->board_name, dev);
+	if (ret == 0)
+		dev->irq = pcidev->irq;
 
 	ret = comedi_alloc_subdevices(dev, 3);
 	if (ret)
 		return ret;
 
+	/* Digital Input subdevice */
 	s = &dev->subdevices[0];
-	s->type = COMEDI_SUBD_DI;
-	s->subdev_flags = SDF_READABLE;
-	s->n_chan = 24;
-	s->range_table = &range_digital;
-	s->maxdata = 1;
-	s->insn_config = ni6527_di_insn_config;
-	s->insn_bits = ni6527_di_insn_bits;
+	s->type		= COMEDI_SUBD_DI;
+	s->subdev_flags	= SDF_READABLE;
+	s->n_chan	= 24;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_config	= ni6527_di_insn_config;
+	s->insn_bits	= ni6527_di_insn_bits;
 
+	/* Digital Output subdevice */
 	s = &dev->subdevices[1];
-	s->type = COMEDI_SUBD_DO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = 24;
-	s->range_table = &range_unknown;  /* FIXME: actually conductance */
-	s->maxdata = 1;
-	s->insn_bits = ni6527_do_insn_bits;
+	s->type		= COMEDI_SUBD_DO;
+	s->subdev_flags	= SDF_WRITABLE;
+	s->n_chan	= 24;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= ni6527_do_insn_bits;
 
+	/* Edge detection interrupt subdevice */
 	s = &dev->subdevices[2];
-	dev->read_subdev = s;
-	s->type = COMEDI_SUBD_DI;
-	s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
-	s->n_chan = 1;
-	s->range_table = &range_unknown;
-	s->maxdata = 1;
-	s->do_cmdtest = ni6527_intr_cmdtest;
-	s->do_cmd = ni6527_intr_cmd;
-	s->cancel = ni6527_intr_cancel;
-	s->insn_bits = ni6527_intr_insn_bits;
-	s->insn_config = ni6527_intr_insn_config;
-
-	writeb(0x00, devpriv->mite->daq_io_addr + Filter_Enable(0));
-	writeb(0x00, devpriv->mite->daq_io_addr + Filter_Enable(1));
-	writeb(0x00, devpriv->mite->daq_io_addr + Filter_Enable(2));
-
-	writeb(ClrEdge | ClrOverflow | ClrFilter | ClrInterval,
-	       devpriv->mite->daq_io_addr + Clear_Register);
-	writeb(0x00, devpriv->mite->daq_io_addr + Master_Interrupt_Control);
-
-	ret = request_irq(mite_irq(devpriv->mite), ni6527_interrupt,
-			  IRQF_SHARED, DRIVER_NAME, dev);
-	if (ret < 0)
-		dev_warn(dev->class_dev, "irq not available\n");
-	else
-		dev->irq = mite_irq(devpriv->mite);
+	if (dev->irq) {
+		dev->read_subdev = s;
+		s->type		= COMEDI_SUBD_DI;
+		s->subdev_flags	= SDF_READABLE | SDF_CMD_READ;
+		s->n_chan	= 1;
+		s->maxdata	= 1;
+		s->range_table	= &range_digital;
+		s->insn_config	= ni6527_intr_insn_config;
+		s->insn_bits	= ni6527_intr_insn_bits;
+		s->do_cmdtest	= ni6527_intr_cmdtest;
+		s->do_cmd	= ni6527_intr_cmd;
+		s->cancel	= ni6527_intr_cancel;
+	} else {
+		s->type = COMEDI_SUBD_UNUSED;
+	}
 
 	return 0;
 }
@@ -409,23 +435,18 @@
 {
 	struct ni6527_private *devpriv = dev->private;
 
-	if (devpriv && devpriv->mite && devpriv->mite->daq_io_addr)
-		writeb(0x00,
-		       devpriv->mite->daq_io_addr + Master_Interrupt_Control);
+	if (devpriv && devpriv->mmio_base)
+		ni6527_reset(dev);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-	if (devpriv && devpriv->mite) {
-		mite_unsetup(devpriv->mite);
-		mite_free(devpriv->mite);
-	}
 	comedi_pci_disable(dev);
 }
 
 static struct comedi_driver ni6527_driver = {
-	.driver_name = DRIVER_NAME,
-	.module = THIS_MODULE,
-	.auto_attach = ni6527_auto_attach,
-	.detach = ni6527_detach,
+	.driver_name	= "ni_6527",
+	.module		= THIS_MODULE,
+	.auto_attach	= ni6527_auto_attach,
+	.detach		= ni6527_detach,
 };
 
 static int ni6527_pci_probe(struct pci_dev *dev,
@@ -442,7 +463,7 @@
 MODULE_DEVICE_TABLE(pci, ni6527_pci_table);
 
 static struct pci_driver ni6527_pci_driver = {
-	.name		= DRIVER_NAME,
+	.name		= "ni_6527",
 	.id_table	= ni6527_pci_table,
 	.probe		= ni6527_pci_probe,
 	.remove		= comedi_pci_auto_unconfig,
@@ -450,5 +471,5 @@
 module_comedi_pci_driver(ni6527_driver, ni6527_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for National Instruments PCI-6527");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index 3607336..8a991dc 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -1213,7 +1213,6 @@
 	s->range_table = &range_digital;
 	s->insn_bits = ni_660x_dio_insn_bits;
 	s->insn_config = ni_660x_dio_insn_config;
-	s->io_bits = 0;		/* all bits default to input */
 	/*  we use the ioconfig registers to control dio direction, so zero
 	output enables in stc dio control reg */
 	ni_660x_write_register(dev, 0, 0, STCDIOControl);
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index e2926ce..e4414cf1 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -136,20 +136,15 @@
 
 static int ni_670x_dio_insn_bits(struct comedi_device *dev,
 				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+				 struct comedi_insn *insn,
+				 unsigned int *data)
 {
 	struct ni_670x_private *devpriv = dev->private;
 	void __iomem *io_addr = devpriv->mite->daq_io_addr +
 					DIO_PORT0_DATA_OFFSET;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		writel(s->state, io_addr);
-	}
 
 	data[1] = readl(io_addr);
 
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 2512ce8..63c8479 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -154,7 +154,7 @@
 
 	volatile unsigned int count;	/* number of data points left to be taken */
 	unsigned int dma;	/*  dma channel */
-	s16 *dma_buffer;	/*  dma buffer */
+	uint16_t *dma_buffer;	/*  dma buffer */
 	unsigned int dma_transfer_size;	/*  size in bytes of dma transfers */
 	int irq_dma_bits;	/*  irq/dma register bits */
 	int config_bits;	/*  config register bits */
@@ -192,7 +192,7 @@
 	struct comedi_async *async;
 	struct comedi_cmd *cmd;
 	unsigned int max_points, num_points, residue, leftover;
-	short dpnt;
+	unsigned short dpnt;
 	static const int sample_size = sizeof(devpriv->dma_buffer[0]);
 
 	if (!dev->attached) {
@@ -684,13 +684,12 @@
 		devpriv->config_bits |= CHANNEL_BITS(0x4 | start_channel);
 		break;
 	case 2:
-		if (start_channel == 0) {
+		if (start_channel == 0)
 			devpriv->config_bits |= CHANNEL_BITS(0x2);
-		} else if (start_channel == 2) {
+		else if (start_channel == 2)
 			devpriv->config_bits |= CHANNEL_BITS(0x3);
-		} else {
+		else
 			return -1;
-		}
 		break;
 	case 4:
 		devpriv->config_bits |= CHANNEL_BITS(0x1);
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index b9122fd..10e3e947 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -1,247 +1,193 @@
 /*
-    comedi/drivers/ni_at_ao.c
-    Driver for NI AT-AO-6/10 boards
+ * ni_at_ao.c
+ * Driver for NI AT-AO-6/10 boards
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000,2002 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 2000,2002 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-*/
 /*
-Driver: ni_at_ao
-Description: National Instruments AT-AO-6/10
-Devices: [National Instruments] AT-AO-6 (at-ao-6), AT-AO-10 (at-ao-10)
-Status: should work
-Author: ds
-Updated: Sun Dec 26 12:26:28 EST 2004
-
-Configuration options:
-  [0] - I/O port base address
-  [1] - IRQ (unused)
-  [2] - DMA (unused)
-  [3] - analog output range, set by jumpers on hardware (0 for -10 to 10V
-	bipolar, 1 for 0V to 10V unipolar)
-
-*/
-/*
- * Register-level programming information can be found in NI
- * document 320379.pdf.
+ * Driver: ni_at_ao
+ * Description: National Instruments AT-AO-6/10
+ * Devices: (National Instruments) AT-AO-6 [at-ao-6]
+ *          (National Instruments) AT-AO-10 [at-ao-10]
+ * Status: should work
+ * Author: David A. Schleef <ds@schleef.org>
+ * Updated: Sun Dec 26 12:26:28 EST 2004
+ *
+ * Configuration options:
+ *   [0] - I/O port base address
+ *   [1] - IRQ (unused)
+ *   [2] - DMA (unused)
+ *   [3] - analog output range, set by jumpers on hardware
+ *         0 for -10 to 10V bipolar
+ *         1 for 0V to 10V unipolar
  */
 
 #include <linux/module.h>
+
 #include "../comedidev.h"
 
-/* board egisters */
-/* registers with _2_ are accessed when GRP2WR is set in CFG1 */
-
-#define ATAO_SIZE 0x20
-
-#define ATAO_2_DMATCCLR		0x00	/* W 16 */
-#define ATAO_DIN		0x00	/* R 16 */
-#define ATAO_DOUT		0x00	/* W 16 */
-
-#define ATAO_CFG2		0x02	/* W 16 */
-#define CALLD1	0x8000
-#define CALLD0	0x4000
-#define FFRTEN	0x2000
-#define DAC2S8	0x1000
-#define DAC2S6	0x0800
-#define DAC2S4	0x0400
-#define DAC2S2	0x0200
-#define DAC2S0	0x0100
-#define LDAC8		0x0080
-#define LDAC6		0x0040
-#define LDAC4		0x0020
-#define LDAC2		0x0010
-#define LDAC0		0x0008
-#define PROMEN	0x0004
-#define SCLK		0x0002
-#define SDATA		0x0001
-
-#define ATAO_2_INT1CLR		0x02	/* W 16 */
-
-#define ATAO_CFG3		0x04	/* W 16 */
-#define DMAMODE	0x0040
-#define CLKOUT	0x0020
-#define RCLKEN	0x0010
-#define DOUTEN2	0x0008
-#define DOUTEN1	0x0004
-#define EN2_5V	0x0002
-#define SCANEN	0x0001
-
-#define ATAO_2_INT2CLR		0x04	/* W 16 */
-
-#define ATAO_82C53_BASE		0x06	/* RW 8 */
-
-#define ATAO_82C53_CNTR1	0x06	/* RW 8 */
-#define ATAO_82C53_CNTR2	0x07	/* RW 8 */
-#define ATAO_82C53_CNTR3	0x08	/* RW 8 */
-#define ATAO_82C53_CNTRCMD	0x09	/* W 8 */
-#define CNTRSEL1	0x80
-#define CNTRSEL0	0x40
-#define RWSEL1	0x20
-#define RWSEL0	0x10
-#define MODESEL2	0x08
-#define MODESEL1	0x04
-#define MODESEL0	0x02
-#define BCDSEL	0x01
-  /* read-back command */
-#define COUNT		0x20
-#define STATUS	0x10
-#define CNTR3		0x08
-#define CNTR2		0x04
-#define CNTR1		0x02
-  /* status */
-#define OUT		0x80
-#define _NULL		0x40
-#define RW1		0x20
-#define RW0		0x10
-#define MODE2		0x08
-#define MODE1		0x04
-#define MODE0		0x02
-#define BCD		0x01
-
-#define ATAO_2_RTSISHFT		0x06	/* W 8 */
-#define RSI		0x01
-
-#define ATAO_2_RTSISTRB		0x07	/* W 8 */
-
-#define ATAO_CFG1		0x0a	/* W 16 */
-#define EXTINT2EN	0x8000
-#define EXTINT1EN	0x4000
-#define CNTINT2EN	0x2000
-#define CNTINT1EN	0x1000
-#define TCINTEN	0x0800
-#define CNT1SRC	0x0400
-#define CNT2SRC	0x0200
-#define FIFOEN	0x0100
-#define GRP2WR	0x0080
-#define EXTUPDEN	0x0040
-#define DMARQ		0x0020
-#define DMAEN		0x0010
-#define CH_mask	0x000f
-#define ATAO_STATUS		0x0a	/* R 16 */
-#define FH		0x0040
-#define FE		0x0020
-#define FF		0x0010
-#define INT2		0x0008
-#define INT1		0x0004
-#define TCINT		0x0002
-#define PROMOUT	0x0001
-
-#define ATAO_FIFO_WRITE		0x0c	/* W 16 */
-#define ATAO_FIFO_CLEAR		0x0c	/* R 16 */
-#define ATAO_DACn(x)		(0x0c + 2*(x))	/* W */
+#include "8253.h"
 
 /*
- * Board descriptions for two imaginary boards.  Describing the
- * boards in this way is optional, and completely driver-dependent.
- * Some drivers use arrays such as this, other do not.
+ * Register map
+ *
+ * Register-level programming information can be found in NI
+ * document 320379.pdf.
  */
+#define ATAO_DIO_REG		0x00
+#define ATAO_CFG2_REG		0x02
+#define ATAO_CFG2_CALLD_NOP	(0 << 14)
+#define ATAO_CFG2_CALLD(x)	((((x) >> 3) + 1) << 14)
+#define ATAO_CFG2_FFRTEN	(1 << 13)
+#define ATAO_CFG2_DACS(x)	(1 << (((x) / 2) + 8))
+#define ATAO_CFG2_LDAC(x)	(1 << (((x) / 2) + 3))
+#define ATAO_CFG2_PROMEN	(1 << 2)
+#define ATAO_CFG2_SCLK		(1 << 1)
+#define ATAO_CFG2_SDATA		(1 << 0)
+#define ATAO_CFG3_REG		0x04
+#define ATAO_CFG3_DMAMODE	(1 << 6)
+#define ATAO_CFG3_CLKOUT	(1 << 5)
+#define ATAO_CFG3_RCLKEN	(1 << 4)
+#define ATAO_CFG3_DOUTEN2	(1 << 3)
+#define ATAO_CFG3_DOUTEN1	(1 << 2)
+#define ATAO_CFG3_EN2_5V	(1 << 1)
+#define ATAO_CFG3_SCANEN	(1 << 0)
+#define ATAO_82C53_BASE		0x06
+#define ATAO_CFG1_REG		0x0a
+#define ATAO_CFG1_EXTINT2EN	(1 << 15)
+#define ATAO_CFG1_EXTINT1EN	(1 << 14)
+#define ATAO_CFG1_CNTINT2EN	(1 << 13)
+#define ATAO_CFG1_CNTINT1EN	(1 << 12)
+#define ATAO_CFG1_TCINTEN	(1 << 11)
+#define ATAO_CFG1_CNT1SRC	(1 << 10)
+#define ATAO_CFG1_CNT2SRC	(1 << 9)
+#define ATAO_CFG1_FIFOEN	(1 << 8)
+#define ATAO_CFG1_GRP2WR	(1 << 7)
+#define ATAO_CFG1_EXTUPDEN	(1 << 6)
+#define ATAO_CFG1_DMARQ		(1 << 5)
+#define ATAO_CFG1_DMAEN		(1 << 4)
+#define ATAO_CFG1_CH(x)		(((x) & 0xf) << 0)
+#define ATAO_STATUS_REG		0x0a
+#define ATAO_STATUS_FH		(1 << 6)
+#define ATAO_STATUS_FE		(1 << 5)
+#define ATAO_STATUS_FF		(1 << 4)
+#define ATAO_STATUS_INT2	(1 << 3)
+#define ATAO_STATUS_INT1	(1 << 2)
+#define ATAO_STATUS_TCINT	(1 << 1)
+#define ATAO_STATUS_PROMOUT	(1 << 0)
+#define ATAO_FIFO_WRITE_REG	0x0c
+#define ATAO_FIFO_CLEAR_REG	0x0c
+#define ATAO_AO_REG(x)		(0x0c + ((x) * 2))
+
+/* registers with _2_ are accessed when GRP2WR is set in CFG1 */
+#define ATAO_2_DMATCCLR_REG	0x00
+#define ATAO_2_INT1CLR_REG	0x02
+#define ATAO_2_INT2CLR_REG	0x04
+#define ATAO_2_RTSISHFT_REG	0x06
+#define ATAO_2_RTSISHFT_RSI	(1 << 0)
+#define ATAO_2_RTSISTRB_REG	0x07
+
 struct atao_board {
 	const char *name;
 	int n_ao_chans;
 };
 
-struct atao_private {
+static const struct atao_board atao_boards[] = {
+	{
+		.name		= "at-ao-6",
+		.n_ao_chans	= 6,
+	}, {
+		.name		= "at-ao-10",
+		.n_ao_chans	= 10,
+	},
+};
 
+struct atao_private {
 	unsigned short cfg1;
-	unsigned short cfg2;
 	unsigned short cfg3;
 
 	/* Used for AO readback */
 	unsigned int ao_readback[10];
+
+	/* Used for caldac readback */
+	unsigned char caldac[21];
 };
 
-static void atao_reset(struct comedi_device *dev)
+static void atao_select_reg_group(struct comedi_device *dev, int group)
 {
 	struct atao_private *devpriv = dev->private;
 
-	/* This is the reset sequence described in the manual */
-
-	devpriv->cfg1 = 0;
-	outw(devpriv->cfg1, dev->iobase + ATAO_CFG1);
-
-	outb(RWSEL0 | MODESEL2, dev->iobase + ATAO_82C53_CNTRCMD);
-	outb(0x03, dev->iobase + ATAO_82C53_CNTR1);
-	outb(CNTRSEL0 | RWSEL0 | MODESEL2, dev->iobase + ATAO_82C53_CNTRCMD);
-
-	devpriv->cfg2 = 0;
-	outw(devpriv->cfg2, dev->iobase + ATAO_CFG2);
-
-	devpriv->cfg3 = 0;
-	outw(devpriv->cfg3, dev->iobase + ATAO_CFG3);
-
-	inw(dev->iobase + ATAO_FIFO_CLEAR);
-
-	devpriv->cfg1 |= GRP2WR;
-	outw(devpriv->cfg1, dev->iobase + ATAO_CFG1);
-
-	outw(0, dev->iobase + ATAO_2_INT1CLR);
-	outw(0, dev->iobase + ATAO_2_INT2CLR);
-	outw(0, dev->iobase + ATAO_2_DMATCCLR);
-
-	devpriv->cfg1 &= ~GRP2WR;
-	outw(devpriv->cfg1, dev->iobase + ATAO_CFG1);
+	if (group)
+		devpriv->cfg1 |= ATAO_CFG1_GRP2WR;
+	else
+		devpriv->cfg1 &= ~ATAO_CFG1_GRP2WR;
+	outw(devpriv->cfg1, dev->iobase + ATAO_CFG1_REG);
 }
 
-static int atao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data)
+static int atao_ao_insn_write(struct comedi_device *dev,
+			      struct comedi_subdevice *s,
+			      struct comedi_insn *insn,
+			      unsigned int *data)
 {
 	struct atao_private *devpriv = dev->private;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int val;
 	int i;
-	int chan = CR_CHAN(insn->chanspec);
-	short bits;
+
+	if (chan == 0)
+		atao_select_reg_group(dev, 1);
 
 	for (i = 0; i < insn->n; i++) {
-		bits = data[i] - 0x800;
-		if (chan == 0) {
-			devpriv->cfg1 |= GRP2WR;
-			outw(devpriv->cfg1, dev->iobase + ATAO_CFG1);
-		}
-		outw(bits, dev->iobase + ATAO_DACn(chan));
-		if (chan == 0) {
-			devpriv->cfg1 &= ~GRP2WR;
-			outw(devpriv->cfg1, dev->iobase + ATAO_CFG1);
-		}
-		devpriv->ao_readback[chan] = data[i];
+		val = data[i];
+		devpriv->ao_readback[chan] = val;
+
+		/* munge offset binary (unsigned) to two's complement */
+		val = comedi_offset_munge(s, val);
+		outw(val, dev->iobase + ATAO_AO_REG(chan));
 	}
 
-	return i;
+	if (chan == 0)
+		atao_select_reg_group(dev, 0);
+
+	return insn->n;
 }
 
-static int atao_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data)
+static int atao_ao_insn_read(struct comedi_device *dev,
+			     struct comedi_subdevice *s,
+			     struct comedi_insn *insn,
+			     unsigned int *data)
 {
 	struct atao_private *devpriv = dev->private;
+	unsigned int chan = CR_CHAN(insn->chanspec);
 	int i;
-	int chan = CR_CHAN(insn->chanspec);
 
 	for (i = 0; i < insn->n; i++)
 		data[i] = devpriv->ao_readback[chan];
 
-	return i;
+	return insn->n;
 }
 
 static int atao_dio_insn_bits(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data)
+			      struct comedi_insn *insn,
+			      unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		outw(s->state, dev->iobase + ATAO_DOUT);
-	}
+	if (comedi_dio_update_state(s, data))
+		outw(s->state, dev->iobase + ATAO_DIO_REG);
 
-	data[1] = inw(dev->iobase + ATAO_DIN);
+	data[1] = inw(dev->iobase + ATAO_DIO_REG);
 
 	return insn->n;
 }
@@ -266,70 +212,138 @@
 		return ret;
 
 	if (s->io_bits & 0x0f)
-		devpriv->cfg3 |= DOUTEN1;
+		devpriv->cfg3 |= ATAO_CFG3_DOUTEN1;
 	else
-		devpriv->cfg3 &= ~DOUTEN1;
+		devpriv->cfg3 &= ~ATAO_CFG3_DOUTEN1;
 	if (s->io_bits & 0xf0)
-		devpriv->cfg3 |= DOUTEN2;
+		devpriv->cfg3 |= ATAO_CFG3_DOUTEN2;
 	else
-		devpriv->cfg3 &= ~DOUTEN2;
+		devpriv->cfg3 &= ~ATAO_CFG3_DOUTEN2;
 
-	outw(devpriv->cfg3, dev->iobase + ATAO_CFG3);
+	outw(devpriv->cfg3, dev->iobase + ATAO_CFG3_REG);
 
 	return insn->n;
 }
 
 /*
- * Figure 2-1 in the manual shows 3 chips labeled DAC8800, which
- * are 8-channel 8-bit DACs.  These are most likely the calibration
- * DACs.  It is not explicitly stated in the manual how to access
- * the caldacs, but we can guess.
+ * There are three DAC8800 TrimDACs on the board. These are 8-channel,
+ * 8-bit DACs that are used to calibrate the Analog Output channels.
+ * The factory default calibration values are stored in the EEPROM.
+ * The TrimDACs, and EEPROM addresses, are mapped as:
+ *
+ *        Channel       EEPROM  Description
+ *   -----------------  ------  -----------------------------------
+ *    0 - DAC0 Chan 0    0x30   AO Channel 0 Offset
+ *    1 - DAC0 Chan 1    0x31   AO Channel 0 Gain
+ *    2 - DAC0 Chan 2    0x32   AO Channel 1 Offset
+ *    3 - DAC0 Chan 3    0x33   AO Channel 1 Gain
+ *    4 - DAC0 Chan 4    0x34   AO Channel 2 Offset
+ *    5 - DAC0 Chan 5    0x35   AO Channel 2 Gain
+ *    6 - DAC0 Chan 6    0x36   AO Channel 3 Offset
+ *    7 - DAC0 Chan 7    0x37   AO Channel 3 Gain
+ *    8 - DAC1 Chan 0    0x38   AO Channel 4 Offset
+ *    9 - DAC1 Chan 1    0x39   AO Channel 4 Gain
+ *   10 - DAC1 Chan 2    0x3a   AO Channel 5 Offset
+ *   11 - DAC1 Chan 3    0x3b   AO Channel 5 Gain
+ *   12 - DAC1 Chan 4    0x3c   2.5V Offset
+ *   13 - DAC1 Chan 5    0x3d   AO Channel 6 Offset (at-ao-10 only)
+ *   14 - DAC1 Chan 6    0x3e   AO Channel 6 Gain   (at-ao-10 only)
+ *   15 - DAC1 Chan 7    0x3f   AO Channel 7 Offset (at-ao-10 only)
+ *   16 - DAC2 Chan 0    0x40   AO Channel 7 Gain   (at-ao-10 only)
+ *   17 - DAC2 Chan 1    0x41   AO Channel 8 Offset (at-ao-10 only)
+ *   18 - DAC2 Chan 2    0x42   AO Channel 8 Gain   (at-ao-10 only)
+ *   19 - DAC2 Chan 3    0x43   AO Channel 9 Offset (at-ao-10 only)
+ *   20 - DAC2 Chan 4    0x44   AO Channel 9 Gain   (at-ao-10 only)
+ *        DAC2 Chan 5    0x45   Reserved
+ *        DAC2 Chan 6    0x46   Reserved
+ *        DAC2 Chan 7    0x47   Reserved
  */
-static int atao_calib_insn_read(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+static int atao_calib_insn_write(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 struct comedi_insn *insn,
+				 unsigned int *data)
 {
-	int i;
-	for (i = 0; i < insn->n; i++)
-		data[i] = 0;	/* XXX */
+	struct atao_private *devpriv = dev->private;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int bitstring;
+	unsigned int val;
+	int bit;
+
+	if (insn->n == 0)
+		return 0;
+
+	devpriv->caldac[chan] = data[insn->n - 1] & s->maxdata;
+
+	/* write the channel and last data value to the caldac */
+	bitstring = ((chan & 0x7) << 8) | devpriv->caldac[chan];
+
+	/* clock the bitstring to the caldac; MSB -> LSB */
+	for (bit = 1 << 10; bit; bit >>= 1) {
+		val = (bit & bitstring) ? ATAO_CFG2_SDATA : 0;
+
+		outw(val, dev->iobase + ATAO_CFG2_REG);
+		outw(val | ATAO_CFG2_SCLK, dev->iobase + ATAO_CFG2_REG);
+	}
+
+	/* strobe the caldac to load the value */
+	outw(ATAO_CFG2_CALLD(chan), dev->iobase + ATAO_CFG2_REG);
+	outw(ATAO_CFG2_CALLD_NOP, dev->iobase + ATAO_CFG2_REG);
+
 	return insn->n;
 }
 
-static int atao_calib_insn_write(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+static int atao_calib_insn_read(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
 	struct atao_private *devpriv = dev->private;
-	unsigned int bitstring, bit;
 	unsigned int chan = CR_CHAN(insn->chanspec);
+	int i;
 
-	bitstring = ((chan & 0x7) << 8) | (data[insn->n - 1] & 0xff);
-
-	for (bit = 1 << (11 - 1); bit; bit >>= 1) {
-		outw(devpriv->cfg2 | ((bit & bitstring) ? SDATA : 0),
-		     dev->iobase + ATAO_CFG2);
-		outw(devpriv->cfg2 | SCLK | ((bit & bitstring) ? SDATA : 0),
-		     dev->iobase + ATAO_CFG2);
-	}
-	/* strobe the appropriate caldac */
-	outw(devpriv->cfg2 | (((chan >> 3) + 1) << 14),
-	     dev->iobase + ATAO_CFG2);
-	outw(devpriv->cfg2, dev->iobase + ATAO_CFG2);
+	for (i = 0; i < insn->n; i++)
+		data[i] = devpriv->caldac[chan];
 
 	return insn->n;
 }
 
+static void atao_reset(struct comedi_device *dev)
+{
+	struct atao_private *devpriv = dev->private;
+
+	/* This is the reset sequence described in the manual */
+
+	devpriv->cfg1 = 0;
+	outw(devpriv->cfg1, dev->iobase + ATAO_CFG1_REG);
+
+	/* Put outputs of counter 1 and counter 2 in a high state */
+	i8254_load(dev->iobase + ATAO_82C53_BASE, 0,
+		   0, 0x0003, I8254_MODE4 | I8254_BINARY);
+	i8254_set_mode(dev->iobase + ATAO_82C53_BASE, 0,
+		   1, I8254_MODE4 | I8254_BINARY);
+
+	outw(ATAO_CFG2_CALLD_NOP, dev->iobase + ATAO_CFG2_REG);
+
+	devpriv->cfg3 = 0;
+	outw(devpriv->cfg3, dev->iobase + ATAO_CFG3_REG);
+
+	inw(dev->iobase + ATAO_FIFO_CLEAR_REG);
+
+	atao_select_reg_group(dev, 1);
+	outw(0, dev->iobase + ATAO_2_INT1CLR_REG);
+	outw(0, dev->iobase + ATAO_2_INT2CLR_REG);
+	outw(0, dev->iobase + ATAO_2_DMATCCLR_REG);
+	atao_select_reg_group(dev, 0);
+}
+
 static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	const struct atao_board *board = comedi_board(dev);
 	struct atao_private *devpriv;
 	struct comedi_subdevice *s;
-	int ao_unipolar;
 	int ret;
 
-	ao_unipolar = it->options[3];
-
-	ret = comedi_request_region(dev, it->options[0], ATAO_SIZE);
+	ret = comedi_request_region(dev, it->options[0], 0x20);
 	if (ret)
 		return ret;
 
@@ -341,60 +355,44 @@
 	if (ret)
 		return ret;
 
+	/* Analog Output subdevice */
 	s = &dev->subdevices[0];
-	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;
-	s->n_chan = board->n_ao_chans;
-	s->maxdata = (1 << 12) - 1;
-	if (ao_unipolar)
-		s->range_table = &range_unipolar10;
-	else
-		s->range_table = &range_bipolar10;
-	s->insn_write = &atao_ao_winsn;
-	s->insn_read = &atao_ao_rinsn;
+	s->type		= COMEDI_SUBD_AO;
+	s->subdev_flags	= SDF_WRITABLE;
+	s->n_chan	= board->n_ao_chans;
+	s->maxdata	= 0x0fff;
+	s->range_table	= it->options[3] ? &range_unipolar10 : &range_bipolar10;
+	s->insn_write	= atao_ao_insn_write;
+	s->insn_read	= atao_ao_insn_read;
 
+	/* Digital I/O subdevice */
 	s = &dev->subdevices[1];
-	/* digital i/o subdevice */
-	s->type = COMEDI_SUBD_DIO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = 8;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = atao_dio_insn_bits;
-	s->insn_config = atao_dio_insn_config;
+	s->type		= COMEDI_SUBD_DIO;
+	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
+	s->n_chan	= 8;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= atao_dio_insn_bits;
+	s->insn_config	= atao_dio_insn_config;
 
-	s = &dev->subdevices[2];
 	/* caldac subdevice */
-	s->type = COMEDI_SUBD_CALIB;
-	s->subdev_flags = SDF_WRITABLE | SDF_INTERNAL;
-	s->n_chan = 21;
-	s->maxdata = 0xff;
-	s->insn_read = atao_calib_insn_read;
-	s->insn_write = atao_calib_insn_write;
+	s = &dev->subdevices[2];
+	s->type		= COMEDI_SUBD_CALIB;
+	s->subdev_flags	= SDF_WRITABLE | SDF_INTERNAL;
+	s->n_chan	= (board->n_ao_chans * 2) + 1;
+	s->maxdata	= 0xff;
+	s->insn_read	= atao_calib_insn_read;
+	s->insn_write	= atao_calib_insn_write;
 
+	/* EEPROM subdevice */
 	s = &dev->subdevices[3];
-	/* eeprom subdevice */
-	/* s->type=COMEDI_SUBD_EEPROM; */
-	s->type = COMEDI_SUBD_UNUSED;
+	s->type		= COMEDI_SUBD_UNUSED;
 
 	atao_reset(dev);
 
-	printk(KERN_INFO "\n");
-
 	return 0;
 }
 
-static const struct atao_board atao_boards[] = {
-	{
-		.name		= "ai-ao-6",
-		.n_ao_chans	= 6,
-	}, {
-		.name		= "ai-ao-10",
-		.n_ao_chans	= 10,
-	},
-};
-
 static struct comedi_driver ni_at_ao_driver = {
 	.driver_name	= "ni_at_ao",
 	.module		= THIS_MODULE,
@@ -407,5 +405,5 @@
 module_comedi_driver(ni_at_ao_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for NI AT-AO-6/10 boards");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c
index bb3491f..a9f7d40 100644
--- a/drivers/staging/comedi/drivers/ni_atmio16d.c
+++ b/drivers/staging/comedi/drivers/ni_atmio16d.c
@@ -558,13 +558,12 @@
 
 static int atmio16d_dio_insn_bits(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] | data[1]);
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + MIO_16_DIG_OUT_REG);
-	}
+
 	data[1] = inw(dev->iobase + MIO_16_DIG_IN_REG);
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 404f83d..e4cdca3 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -72,18 +72,22 @@
 
 static int daq700_dio_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	unsigned int mask;
+	unsigned int val;
 
-		if (data[0] & 0xff)
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		if (mask & 0xff)
 			outb(s->state & 0xff, dev->iobase + DIO_W);
 	}
 
-	data[1] = s->state & 0xff;
-	data[1] |= inb(dev->iobase + DIO_R) << 8;
+	val = s->state & 0xff;
+	val |= inb(dev->iobase + DIO_R) << 8;
+
+	data[1] = val;
 
 	return insn->n;
 }
@@ -212,7 +216,6 @@
 	s->maxdata	= 1;
 	s->insn_bits	= daq700_dio_insn_bits;
 	s->insn_config	= daq700_dio_insn_config;
-	s->state	= 0;
 	s->io_bits	= 0x00ff;
 
 	/* DAQCard-700 ai */
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 1add114..0512445 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -73,7 +73,6 @@
 #include "ni_labpc_isadma.h"
 
 #define LABPC_SIZE		0x20	/* size of ISA io region */
-#define LABPC_TIMER_BASE	500	/* 2 MHz master clock */
 #define LABPC_ADC_TIMEOUT	1000
 
 enum scan_mode {
@@ -201,12 +200,6 @@
 		return i8254_set_mode(base_address, 0, counter_number, mode);
 }
 
-static bool labpc_range_is_unipolar(struct comedi_subdevice *s,
-				    unsigned int range)
-{
-	return s->range_table->range[range].min >= 0;
-}
-
 static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct labpc_private *devpriv = dev->private;
@@ -272,7 +265,7 @@
 		devpriv->cmd6 &= ~CMD6_NRSE;
 
 	/* bipolar or unipolar range? */
-	if (labpc_range_is_unipolar(s, range))
+	if (comedi_range_is_unipolar(s, range))
 		devpriv->cmd6 |= CMD6_ADCUNI;
 	else
 		devpriv->cmd6 &= ~CMD6_ADCUNI;
@@ -465,13 +458,13 @@
 		 * clock speed on convert and scan counters)
 		 */
 		devpriv->divisor_b0 = (scan_period - 1) /
-		    (LABPC_TIMER_BASE * max_counter_value) + 1;
+		    (I8254_OSC_BASE_2MHZ * max_counter_value) + 1;
 		if (devpriv->divisor_b0 < min_counter_value)
 			devpriv->divisor_b0 = min_counter_value;
 		if (devpriv->divisor_b0 > max_counter_value)
 			devpriv->divisor_b0 = max_counter_value;
 
-		base_period = LABPC_TIMER_BASE * devpriv->divisor_b0;
+		base_period = I8254_OSC_BASE_2MHZ * devpriv->divisor_b0;
 
 		/*  set a0 for conversion frequency and b1 for scan frequency */
 		switch (cmd->flags & TRIG_ROUND_MASK) {
@@ -516,22 +509,20 @@
 		 * calculate cascaded counter values
 		 * that give desired scan timing
 		 */
-		i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
-					       &(devpriv->divisor_b1),
-					       &(devpriv->divisor_b0),
-					       &scan_period,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_2MHZ,
+					  &devpriv->divisor_b1,
+					  &devpriv->divisor_b0,
+					  &scan_period, cmd->flags);
 		labpc_set_ai_scan_period(cmd, mode, scan_period);
 	} else if (convert_period) {
 		/*
 		 * calculate cascaded counter values
 		 * that give desired conversion timing
 		 */
-		i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
-					       &(devpriv->divisor_a0),
-					       &(devpriv->divisor_b0),
-					       &convert_period,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_2MHZ,
+					  &devpriv->divisor_a0,
+					  &devpriv->divisor_b0,
+					  &convert_period, cmd->flags);
 		labpc_set_ai_convert_period(cmd, mode, convert_period);
 	}
 }
@@ -902,7 +893,7 @@
 static int labpc_drain_fifo(struct comedi_device *dev)
 {
 	struct labpc_private *devpriv = dev->private;
-	short data;
+	unsigned short data;
 	struct comedi_async *async = dev->read_subdev->async;
 	const int timeout = 10000;
 	unsigned int i;
@@ -1046,7 +1037,7 @@
 	/* set range */
 	if (board->is_labpc1200) {
 		range = CR_RANGE(insn->chanspec);
-		if (labpc_range_is_unipolar(s, range))
+		if (comedi_range_is_unipolar(s, range))
 			devpriv->cmd6 |= CMD6_DACUNI(channel);
 		else
 			devpriv->cmd6 &= ~CMD6_DACUNI(channel);
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 4e02770..5113397 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -1292,7 +1292,7 @@
 	struct comedi_cmd *cmd = &async->cmd;
 	int chan;
 	int i;
-	short d;
+	unsigned short d;
 	u32 packed_data;
 	int range;
 	int err = 1;
@@ -1403,7 +1403,7 @@
 	int i;
 
 	if (board->reg_type == ni_reg_611x) {
-		short data[2];
+		unsigned short data[2];
 		u32 dl;
 
 		for (i = 0; i < n / 2; i++) {
@@ -1420,7 +1420,7 @@
 			cfc_write_to_buffer(s, data[0]);
 		}
 	} else if (board->reg_type == ni_reg_6143) {
-		short data[2];
+		unsigned short data[2];
 		u32 dl;
 
 		/*  This just reads the FIFO assuming the data is present, no checks on the FIFO status are performed */
@@ -1511,9 +1511,9 @@
 	const struct ni_board_struct *board = comedi_board(dev);
 	struct ni_private *devpriv = dev->private;
 	struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
-	short data[2];
+	unsigned short data[2];
 	u32 dl;
-	short fifo_empty;
+	unsigned short fifo_empty;
 	int i;
 
 	if (board->reg_type == ni_reg_611x) {
@@ -1577,7 +1577,7 @@
 	const struct ni_board_struct *board = comedi_board(dev);
 	struct ni_private *devpriv __maybe_unused = dev->private;
 	struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
-	short data;
+	unsigned short data;
 	u32 dl;
 
 	if (board->reg_type != ni_reg_611x)
@@ -1596,7 +1596,7 @@
 	const struct ni_board_struct *board = comedi_board(dev);
 	struct ni_private *devpriv __maybe_unused = dev->private;
 	struct comedi_subdevice *s = &dev->subdevices[NI_AI_SUBDEV];
-	short data;
+	unsigned short data;
 	u32 dl;
 
 	if (board->reg_type != ni_reg_6143)
@@ -1621,7 +1621,7 @@
 	struct comedi_async *async = s->async;
 	unsigned int i;
 	unsigned int length = num_bytes / bytes_per_sample(s);
-	short *array = data;
+	unsigned short *array = data;
 	unsigned int *larray = data;
 
 	for (i = 0; i < length; i++) {
@@ -2873,7 +2873,7 @@
 	unsigned int i;
 	unsigned int offset;
 	unsigned int length = num_bytes / sizeof(short);
-	short *array = data;
+	unsigned short *array = data;
 
 	offset = 1 << (board->aobits - 1);
 	for (i = 0; i < length; i++) {
@@ -3547,28 +3547,22 @@
 
 static int ni_dio_insn_bits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+			    struct comedi_insn *insn,
+			    unsigned int *data)
 {
 	struct ni_private *devpriv = dev->private;
 
-#ifdef DEBUG_DIO
-	printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0], data[1]);
-#endif
+	/* Make sure we're not using the serial part of the dio */
+	if ((data[0] & (DIO_SDIN | DIO_SDOUT)) && devpriv->serial_interval_ns)
+		return -EBUSY;
 
-	if (data[0]) {
-		/* Perform check to make sure we're not using the
-		   serial part of the dio */
-		if ((data[0] & (DIO_SDIN | DIO_SDOUT))
-		    && devpriv->serial_interval_ns)
-			return -EBUSY;
-
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data)) {
 		devpriv->dio_output &= ~DIO_Parallel_Data_Mask;
 		devpriv->dio_output |= DIO_Parallel_Data_Out(s->state);
 		devpriv->stc_writew(dev, devpriv->dio_output,
 				    DIO_Output_Register);
 	}
+
 	data[1] = devpriv->stc_readw(dev, DIO_Parallel_Input_Register);
 
 	return insn->n;
@@ -3598,16 +3592,9 @@
 {
 	struct ni_private *devpriv __maybe_unused = dev->private;
 
-#ifdef DEBUG_DIO
-	printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0],
-	       data[1]);
-#endif
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data))
 		ni_writel(s->state, M_Offset_Static_Digital_Output);
-	}
+
 	data[1] = ni_readl(M_Offset_Static_Digital_Input);
 
 	return insn->n;
@@ -5355,20 +5342,20 @@
 
 static int ni_pfi_insn_bits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data)
+			    struct comedi_insn *insn,
+			    unsigned int *data)
 {
 	const struct ni_board_struct *board = comedi_board(dev);
 	struct ni_private *devpriv __maybe_unused = dev->private;
 
-	if ((board->reg_type & ni_reg_m_series_mask) == 0) {
+	if (!(board->reg_type & ni_reg_m_series_mask))
 		return -ENOTSUPP;
-	}
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+
+	if (comedi_dio_update_state(s, data))
 		ni_writew(s->state, M_Offset_PFI_DO);
-	}
+
 	data[1] = ni_readw(M_Offset_PFI_DI);
+
 	return insn->n;
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index fad81bc..e3a8fa9 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -406,9 +406,9 @@
 	struct mite_struct *mite = devpriv->mite;
 
 	/* int i, j; */
-	long int AuxData = 0;
-	short data1 = 0;
-	short data2 = 0;
+	unsigned int auxdata = 0;
+	unsigned short data1 = 0;
+	unsigned short data2 = 0;
 	int flags;
 	int status;
 	int work = 0;
@@ -481,11 +481,11 @@
 					      );
 					goto out;
 				}
-				AuxData =
+				auxdata =
 				    readl(devpriv->mite->daq_io_addr +
 					  Group_1_FIFO);
-				data1 = AuxData & 0xffff;
-				data2 = (AuxData & 0xffff0000) >> 16;
+				data1 = auxdata & 0xffff;
+				data2 = (auxdata & 0xffff0000) >> 16;
 				comedi_buf_put(async, data1);
 				comedi_buf_put(async, data2);
 				/* DPRINTK("read:%d, %d\n",data1,data2); */
@@ -657,15 +657,14 @@
 
 static int ni_pcidio_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
 	struct nidio96_private *devpriv = dev->private;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
+	if (comedi_dio_update_state(s, data))
 		writel(s->state, devpriv->mite->daq_io_addr + Port_IO(0));
-	}
+
 	data[1] = readl(devpriv->mite->daq_io_addr + Port_IO(0));
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index 11bf0aa..f0630b78 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -1491,7 +1491,7 @@
 	unsigned short pwm_up_count;	\
 	unsigned short pwm_down_count;	\
 	\
-	short ai_fifo_buffer[0x2000];				\
+	unsigned short ai_fifo_buffer[0x2000];			\
 	uint8_t eeprom_buffer[M_SERIES_EEPROM_SIZE]; \
 	uint32_t serial_number; \
 	\
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index e859f85..f0fc123 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -1,258 +1,295 @@
 /*
-   comedi/drivers/pcl711.c
-   hardware driver for PC-LabCard PCL-711 and AdSys ACL-8112
-   and compatibles
-
-   COMEDI - Linux Control and Measurement Device Interface
-   Copyright (C) 1998 David A. Schleef <ds@schleef.org>
-   Janne Jalkanen <jalkanen@cs.hut.fi>
-   Eric Bunn <ebu@cs.hut.fi>
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+ * pcl711.c
+ * Comedi driver for PC-LabCard PCL-711 and AdSys ACL-8112 and compatibles
+ * Copyright (C) 1998 David A. Schleef <ds@schleef.org>
+ *		      Janne Jalkanen <jalkanen@cs.hut.fi>
+ *		      Eric Bunn <ebu@cs.hut.fi>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1998 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  */
-/*
-Driver: pcl711
-Description: Advantech PCL-711 and 711b, ADLink ACL-8112
-Author: ds, Janne Jalkanen <jalkanen@cs.hut.fi>, Eric Bunn <ebu@cs.hut.fi>
-Status: mostly complete
-Devices: [Advantech] PCL-711 (pcl711), PCL-711B (pcl711b),
-  [AdLink] ACL-8112HG (acl8112hg), ACL-8112DG (acl8112dg)
-
-Since these boards do not have DMA or FIFOs, only immediate mode is
-supported.
-
-*/
 
 /*
-   Dave Andruczyk <dave@tech.buffalostate.edu> also wrote a
-   driver for the PCL-711.  I used a few ideas from his driver
-   here.  His driver also has more comments, if you are
-   interested in understanding how this driver works.
-   http://tech.buffalostate.edu/~dave/driver/
-
-   The ACL-8112 driver was hacked from the sources of the PCL-711
-   driver (the 744 chip used on the 8112 is almost the same as
-   the 711b chip, but it has more I/O channels) by
-   Janne Jalkanen (jalkanen@cs.hut.fi) and
-   Erik Bunn (ebu@cs.hut.fi).  Remerged with the PCL-711 driver
-   by ds.
-
-   [acl-8112]
-   This driver supports both TRIGNOW and TRIGCLK,
-   but does not yet support DMA transfers.  It also supports
-   both high (HG) and low (DG) versions of the card, though
-   the HG version has been untested.
-
+ * Driver: pcl711
+ * Description: Advantech PCL-711 and 711b, ADLink ACL-8112
+ * Devices: (Advantech) PCL-711 [pcl711]
+ *	    (Advantech) PCL-711B [pcl711b]
+ *	    (AdLink) ACL-8112HG [acl8112hg]
+ *	    (AdLink) ACL-8112DG [acl8112dg]
+ * Author: David A. Schleef <ds@schleef.org>
+ *	   Janne Jalkanen <jalkanen@cs.hut.fi>
+ *	   Eric Bunn <ebu@cs.hut.fi>
+ * Updated:
+ * Status: mostly complete
+ *
+ * Configuration Options:
+ *   [0] - I/O port base
+ *   [1] - IRQ, optional
  */
 
 #include <linux/module.h>
-#include <linux/interrupt.h>
-#include "../comedidev.h"
-
 #include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include "../comedidev.h"
 
 #include "comedi_fc.h"
 #include "8253.h"
 
-#define PCL711_SIZE 16
-
-#define PCL711_CTR0 0
-#define PCL711_CTR1 1
-#define PCL711_CTR2 2
-#define PCL711_CTRCTL 3
-#define PCL711_AD_LO 4
-#define PCL711_DA0_LO 4
-#define PCL711_AD_HI 5
-#define PCL711_DA0_HI 5
-#define PCL711_DI_LO 6
-#define PCL711_DA1_LO 6
-#define PCL711_DI_HI 7
-#define PCL711_DA1_HI 7
-#define PCL711_CLRINTR 8
-#define PCL711_GAIN 9
-#define PCL711_MUX 10
-#define PCL711_MODE 11
-#define PCL711_SOFTTRIG 12
-#define PCL711_DO_LO 13
-#define PCL711_DO_HI 14
-
-static const struct comedi_lrange range_pcl711b_ai = { 5, {
-							   BIP_RANGE(5),
-							   BIP_RANGE(2.5),
-							   BIP_RANGE(1.25),
-							   BIP_RANGE(0.625),
-							   BIP_RANGE(0.3125)
-							   }
-};
-
-static const struct comedi_lrange range_acl8112hg_ai = { 12, {
-							      BIP_RANGE(5),
-							      BIP_RANGE(0.5),
-							      BIP_RANGE(0.05),
-							      BIP_RANGE(0.005),
-							      UNI_RANGE(10),
-							      UNI_RANGE(1),
-							      UNI_RANGE(0.1),
-							      UNI_RANGE(0.01),
-							      BIP_RANGE(10),
-							      BIP_RANGE(1),
-							      BIP_RANGE(0.1),
-							      BIP_RANGE(0.01)
-							      }
-};
-
-static const struct comedi_lrange range_acl8112dg_ai = { 9, {
-							     BIP_RANGE(5),
-							     BIP_RANGE(2.5),
-							     BIP_RANGE(1.25),
-							     BIP_RANGE(0.625),
-							     UNI_RANGE(10),
-							     UNI_RANGE(5),
-							     UNI_RANGE(2.5),
-							     UNI_RANGE(1.25),
-							     BIP_RANGE(10)
-							     }
-};
-
 /*
- * flags
+ * I/O port register map
  */
+#define PCL711_TIMER_BASE	0x00
+#define PCL711_AI_LSB_REG	0x04
+#define PCL711_AI_MSB_REG	0x05
+#define PCL711_AI_MSB_DRDY	(1 << 4)
+#define PCL711_AO_LSB_REG(x)	(0x04 + ((x) * 2))
+#define PCL711_AO_MSB_REG(x)	(0x05 + ((x) * 2))
+#define PCL711_DI_LSB_REG	0x06
+#define PCL711_DI_MSB_REG	0x07
+#define PCL711_INT_STAT_REG	0x08
+#define PCL711_INT_STAT_CLR	(0 << 0)  /* any value will work */
+#define PCL711_AI_GAIN_REG	0x09
+#define PCL711_AI_GAIN(x)	(((x) & 0xf) << 0)
+#define PCL711_MUX_REG		0x0a
+#define PCL711_MUX_CHAN(x)	(((x) & 0xf) << 0)
+#define PCL711_MUX_CS0		(1 << 4)
+#define PCL711_MUX_CS1		(1 << 5)
+#define PCL711_MUX_DIFF		(PCL711_MUX_CS0 | PCL711_MUX_CS1)
+#define PCL711_MODE_REG		0x0b
+#define PCL711_MODE_DEFAULT	(0 << 0)
+#define PCL711_MODE_SOFTTRIG	(1 << 0)
+#define PCL711_MODE_EXT		(2 << 0)
+#define PCL711_MODE_EXT_IRQ	(3 << 0)
+#define PCL711_MODE_PACER	(4 << 0)
+#define PCL711_MODE_PACER_IRQ	(6 << 0)
+#define PCL711_MODE_IRQ(x)	(((x) & 0x7) << 4)
+#define PCL711_SOFTTRIG_REG	0x0c
+#define PCL711_SOFTTRIG		(0 << 0)  /* any value will work */
+#define PCL711_DO_LSB_REG	0x0d
+#define PCL711_DO_MSB_REG	0x0e
 
-#define PCL711_TIMEOUT 100
-#define PCL711_DRDY 0x10
+static const struct comedi_lrange range_pcl711b_ai = {
+	5, {
+		BIP_RANGE(5),
+		BIP_RANGE(2.5),
+		BIP_RANGE(1.25),
+		BIP_RANGE(0.625),
+		BIP_RANGE(0.3125)
+	}
+};
 
-static const int i8253_osc_base = 500;	/* 2 Mhz */
+static const struct comedi_lrange range_acl8112hg_ai = {
+	12, {
+		BIP_RANGE(5),
+		BIP_RANGE(0.5),
+		BIP_RANGE(0.05),
+		BIP_RANGE(0.005),
+		UNI_RANGE(10),
+		UNI_RANGE(1),
+		UNI_RANGE(0.1),
+		UNI_RANGE(0.01),
+		BIP_RANGE(10),
+		BIP_RANGE(1),
+		BIP_RANGE(0.1),
+		BIP_RANGE(0.01)
+	}
+};
+
+static const struct comedi_lrange range_acl8112dg_ai = {
+	9, {
+		BIP_RANGE(5),
+		BIP_RANGE(2.5),
+		BIP_RANGE(1.25),
+		BIP_RANGE(0.625),
+		UNI_RANGE(10),
+		UNI_RANGE(5),
+		UNI_RANGE(2.5),
+		UNI_RANGE(1.25),
+		BIP_RANGE(10)
+	}
+};
 
 struct pcl711_board {
-
 	const char *name;
-	int is_pcl711b;
-	int is_8112;
-	int is_dg;
-	int n_ranges;
 	int n_aichan;
 	int n_aochan;
 	int maxirq;
 	const struct comedi_lrange *ai_range_type;
 };
 
-struct pcl711_private {
+static const struct pcl711_board boardtypes[] = {
+	{
+		.name		= "pcl711",
+		.n_aichan	= 8,
+		.n_aochan	= 1,
+		.ai_range_type	= &range_bipolar5,
+	}, {
+		.name		= "pcl711b",
+		.n_aichan	= 8,
+		.n_aochan	= 1,
+		.maxirq		= 7,
+		.ai_range_type	= &range_pcl711b_ai,
+	}, {
+		.name		= "acl8112hg",
+		.n_aichan	= 16,
+		.n_aochan	= 2,
+		.maxirq		= 15,
+		.ai_range_type	= &range_acl8112hg_ai,
+	}, {
+		.name		= "acl8112dg",
+		.n_aichan	= 16,
+		.n_aochan	= 2,
+		.maxirq		= 15,
+		.ai_range_type	= &range_acl8112dg_ai,
+	},
+};
 
-	int board;
-	int adchan;
-	int ntrig;
-	int aip[8];
-	int mode;
+struct pcl711_private {
+	unsigned int ntrig;
 	unsigned int ao_readback[2];
 	unsigned int divisor1;
 	unsigned int divisor2;
 };
 
+static void pcl711_ai_set_mode(struct comedi_device *dev, unsigned int mode)
+{
+	/*
+	 * The pcl711b board uses bits in the mode register to select the
+	 * interrupt. The other boards supported by this driver all use
+	 * jumpers on the board.
+	 *
+	 * Enables the interrupt when needed on the pcl711b board. These
+	 * bits do nothing on the other boards.
+	 */
+	if (mode == PCL711_MODE_EXT_IRQ || mode == PCL711_MODE_PACER_IRQ)
+		mode |= PCL711_MODE_IRQ(dev->irq);
+
+	outb(mode, dev->iobase + PCL711_MODE_REG);
+}
+
+static unsigned int pcl711_ai_get_sample(struct comedi_device *dev,
+					 struct comedi_subdevice *s)
+{
+	unsigned int val;
+
+	val = inb(dev->iobase + PCL711_AI_MSB_REG) << 8;
+	val |= inb(dev->iobase + PCL711_AI_LSB_REG);
+
+	return val & s->maxdata;
+}
+
+static int pcl711_ai_cancel(struct comedi_device *dev,
+			    struct comedi_subdevice *s)
+{
+	outb(PCL711_INT_STAT_CLR, dev->iobase + PCL711_INT_STAT_REG);
+	pcl711_ai_set_mode(dev, PCL711_MODE_SOFTTRIG);
+	return 0;
+}
+
 static irqreturn_t pcl711_interrupt(int irq, void *d)
 {
-	int lo, hi;
-	int data;
 	struct comedi_device *dev = d;
-	const struct pcl711_board *board = comedi_board(dev);
 	struct pcl711_private *devpriv = dev->private;
-	struct comedi_subdevice *s = &dev->subdevices[0];
+	struct comedi_subdevice *s = dev->read_subdev;
+	unsigned int data;
 
 	if (!dev->attached) {
 		comedi_error(dev, "spurious interrupt");
 		return IRQ_HANDLED;
 	}
 
-	hi = inb(dev->iobase + PCL711_AD_HI);
-	lo = inb(dev->iobase + PCL711_AD_LO);
-	outb(0, dev->iobase + PCL711_CLRINTR);
+	data = pcl711_ai_get_sample(dev, s);
 
-	data = (hi << 8) | lo;
+	outb(PCL711_INT_STAT_CLR, dev->iobase + PCL711_INT_STAT_REG);
 
-	/* FIXME! Nothing else sets ntrig! */
-	if (!(--devpriv->ntrig)) {
-		if (board->is_8112)
-			outb(1, dev->iobase + PCL711_MODE);
-		else
-			outb(0, dev->iobase + PCL711_MODE);
-
-		s->async->events |= COMEDI_CB_EOA;
+	if (comedi_buf_put(s->async, data) == 0) {
+		s->async->events |= COMEDI_CB_OVERFLOW | COMEDI_CB_ERROR;
+	} else {
+		s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
+		if (s->async->cmd.stop_src == TRIG_COUNT &&
+		    !(--devpriv->ntrig)) {
+			pcl711_ai_set_mode(dev, PCL711_MODE_SOFTTRIG);
+			s->async->events |= COMEDI_CB_EOA;
+		}
 	}
 	comedi_event(dev, s);
 	return IRQ_HANDLED;
 }
 
-static void pcl711_set_changain(struct comedi_device *dev, int chan)
+static void pcl711_set_changain(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				unsigned int chanspec)
 {
-	const struct pcl711_board *board = comedi_board(dev);
-	int chan_register;
+	unsigned int chan = CR_CHAN(chanspec);
+	unsigned int range = CR_RANGE(chanspec);
+	unsigned int aref = CR_AREF(chanspec);
+	unsigned int mux = 0;
 
-	outb(CR_RANGE(chan), dev->iobase + PCL711_GAIN);
+	outb(PCL711_AI_GAIN(range), dev->iobase + PCL711_AI_GAIN_REG);
 
-	chan_register = CR_CHAN(chan);
-
-	if (board->is_8112) {
-
-		/*
-		 *  Set the correct channel.  The two channel banks are switched
-		 *  using the mask value.
-		 *  NB: To use differential channels, you should use
-		 *  mask = 0x30, but I haven't written the support for this
-		 *  yet. /JJ
-		 */
-
-		if (chan_register >= 8)
-			chan_register = 0x20 | (chan_register & 0x7);
-		else
-			chan_register |= 0x10;
-	} else {
-		outb(chan_register, dev->iobase + PCL711_MUX);
+	if (s->n_chan > 8) {
+		/* Select the correct MPC508A chip */
+		if (aref == AREF_DIFF) {
+			chan &= 0x7;
+			mux |= PCL711_MUX_DIFF;
+		} else {
+			if (chan < 8)
+				mux |= PCL711_MUX_CS0;
+			else
+				mux |= PCL711_MUX_CS1;
+		}
 	}
+	outb(mux | PCL711_MUX_CHAN(chan), dev->iobase + PCL711_MUX_REG);
 }
 
-static int pcl711_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
+static int pcl711_ai_wait_for_eoc(struct comedi_device *dev,
+				  unsigned int timeout)
 {
-	const struct pcl711_board *board = comedi_board(dev);
-	int i, n;
-	int hi, lo;
+	unsigned int msb;
 
-	pcl711_set_changain(dev, insn->chanspec);
+	while (timeout--) {
+		msb = inb(dev->iobase + PCL711_AI_MSB_REG);
+		if ((msb & PCL711_AI_MSB_DRDY) == 0)
+			return 0;
+		udelay(1);
+	}
+	return -ETIME;
+}
 
-	for (n = 0; n < insn->n; n++) {
-		/*
-		 *  Write the correct mode (software polling) and start polling
-		 *  by writing to the trigger register
-		 */
-		outb(1, dev->iobase + PCL711_MODE);
+static int pcl711_ai_insn_read(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn,
+			       unsigned int *data)
+{
+	int ret;
+	int i;
 
-		if (!board->is_8112)
-			outb(0, dev->iobase + PCL711_SOFTTRIG);
+	pcl711_set_changain(dev, s, insn->chanspec);
 
-		i = PCL711_TIMEOUT;
-		while (--i) {
-			hi = inb(dev->iobase + PCL711_AD_HI);
-			if (!(hi & PCL711_DRDY))
-				goto ok;
-			udelay(1);
-		}
-		printk(KERN_ERR "comedi%d: pcl711: A/D timeout\n", dev->minor);
-		return -ETIME;
+	pcl711_ai_set_mode(dev, PCL711_MODE_SOFTTRIG);
 
-ok:
-		lo = inb(dev->iobase + PCL711_AD_LO);
+	for (i = 0; i < insn->n; i++) {
+		outb(PCL711_SOFTTRIG, dev->iobase + PCL711_SOFTTRIG_REG);
 
-		data[n] = ((hi & 0xf) << 8) | lo;
+		ret = pcl711_ai_wait_for_eoc(dev, 100);
+		if (ret)
+			return ret;
+
+		data[i] = pcl711_ai_get_sample(dev, s);
 	}
 
-	return n;
+	return insn->n;
 }
 
 static int pcl711_ai_cmdtest(struct comedi_device *dev,
@@ -292,7 +329,6 @@
 		err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
 	} else {
 #define MAX_SPEED 1000
-#define TIMER_BASE 100
 		err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
 						 MAX_SPEED);
 	}
@@ -313,11 +349,11 @@
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		tmp = cmd->scan_begin_arg;
-		i8253_cascade_ns_to_timer_2div(TIMER_BASE,
-					       &devpriv->divisor1,
-					       &devpriv->divisor2,
-					       &cmd->scan_begin_arg,
-					       cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(I8254_OSC_BASE_2MHZ,
+					  &devpriv->divisor1,
+					  &devpriv->divisor2,
+					  &cmd->scan_begin_arg,
+					  cmd->flags);
 		if (tmp != cmd->scan_begin_arg)
 			err++;
 	}
@@ -331,110 +367,106 @@
 static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct pcl711_private *devpriv = dev->private;
-	int timer1, timer2;
 	struct comedi_cmd *cmd = &s->async->cmd;
 
-	pcl711_set_changain(dev, cmd->chanlist[0]);
+	pcl711_set_changain(dev, s, cmd->chanlist[0]);
+
+	if (cmd->stop_src == TRIG_COUNT) {
+		if (cmd->stop_arg == 0) {
+			/* an empty acquisition */
+			s->async->events |= COMEDI_CB_EOA;
+			comedi_event(dev, s);
+			return 0;
+		}
+		devpriv->ntrig = cmd->stop_arg;
+	}
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
-		/*
-		 *  Set timers
-		 *      timer chip is an 8253, with timers 1 and 2
-		 *      cascaded
-		 *  0x74 = Select Counter 1 | LSB/MSB | Mode=2 | Binary
-		 *        Mode 2 = Rate generator
-		 *
-		 *  0xb4 = Select Counter 2 | LSB/MSB | Mode=2 | Binary
-		 */
+		i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
+			   1, devpriv->divisor1, I8254_MODE2 | I8254_BINARY);
+		i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
+			   2, devpriv->divisor2, I8254_MODE2 | I8254_BINARY);
 
-		timer1 = timer2 = 0;
-		i8253_cascade_ns_to_timer(i8253_osc_base, &timer1, &timer2,
-					  &cmd->scan_begin_arg,
-					  TRIG_ROUND_NEAREST);
+		outb(PCL711_INT_STAT_CLR, dev->iobase + PCL711_INT_STAT_REG);
 
-		outb(0x74, dev->iobase + PCL711_CTRCTL);
-		outb(timer1 & 0xff, dev->iobase + PCL711_CTR1);
-		outb((timer1 >> 8) & 0xff, dev->iobase + PCL711_CTR1);
-		outb(0xb4, dev->iobase + PCL711_CTRCTL);
-		outb(timer2 & 0xff, dev->iobase + PCL711_CTR2);
-		outb((timer2 >> 8) & 0xff, dev->iobase + PCL711_CTR2);
-
-		/* clear pending interrupts (just in case) */
-		outb(0, dev->iobase + PCL711_CLRINTR);
-
-		/*
-		 *  Set mode to IRQ transfer
-		 */
-		outb(devpriv->mode | 6, dev->iobase + PCL711_MODE);
+		pcl711_ai_set_mode(dev, PCL711_MODE_PACER_IRQ);
 	} else {
-		/* external trigger */
-		outb(devpriv->mode | 3, dev->iobase + PCL711_MODE);
+		pcl711_ai_set_mode(dev, PCL711_MODE_EXT_IRQ);
 	}
 
 	return 0;
 }
 
-/*
-   analog output
-*/
-static int pcl711_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
+static void pcl711_ao_write(struct comedi_device *dev,
+			    unsigned int chan, unsigned int val)
+{
+	outb(val & 0xff, dev->iobase + PCL711_AO_LSB_REG(chan));
+	outb((val >> 8) & 0xff, dev->iobase + PCL711_AO_MSB_REG(chan));
+}
+
+static int pcl711_ao_insn_write(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
 	struct pcl711_private *devpriv = dev->private;
-	int n;
-	int chan = CR_CHAN(insn->chanspec);
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int val = devpriv->ao_readback[chan];
+	int i;
 
-	for (n = 0; n < insn->n; n++) {
-		outb((data[n] & 0xff),
-		     dev->iobase + (chan ? PCL711_DA1_LO : PCL711_DA0_LO));
-		outb((data[n] >> 8),
-		     dev->iobase + (chan ? PCL711_DA1_HI : PCL711_DA0_HI));
-
-		devpriv->ao_readback[chan] = data[n];
+	for (i = 0; i < insn->n; i++) {
+		val = data[i];
+		pcl711_ao_write(dev, chan, val);
 	}
-
-	return n;
-}
-
-static int pcl711_ao_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	struct pcl711_private *devpriv = dev->private;
-	int n;
-	int chan = CR_CHAN(insn->chanspec);
-
-	for (n = 0; n < insn->n; n++)
-		data[n] = devpriv->ao_readback[chan];
-
-	return n;
-
-}
-
-/* Digital port read - Untested on 8112 */
-static int pcl711_di_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	data[1] = inb(dev->iobase + PCL711_DI_LO) |
-	    (inb(dev->iobase + PCL711_DI_HI) << 8);
+	devpriv->ao_readback[chan] = val;
 
 	return insn->n;
 }
 
-/* Digital port write - Untested on 8112 */
+static int pcl711_ao_insn_read(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn,
+			       unsigned int *data)
+{
+	struct pcl711_private *devpriv = dev->private;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	int i;
+
+	for (i = 0; i < insn->n; i++)
+		data[i] = devpriv->ao_readback[chan];
+
+	return insn->n;
+}
+
+static int pcl711_di_insn_bits(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn,
+			       unsigned int *data)
+{
+	unsigned int val;
+
+	val = inb(dev->iobase + PCL711_DI_LSB_REG);
+	val |= (inb(dev->iobase + PCL711_DI_MSB_REG) << 8);
+
+	data[1] = val;
+
+	return insn->n;
+}
+
 static int pcl711_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
+	unsigned int mask;
+
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		if (mask & 0x00ff)
+			outb(s->state & 0xff, dev->iobase + PCL711_DO_LSB_REG);
+		if (mask & 0xff00)
+			outb((s->state >> 8), dev->iobase + PCL711_DO_MSB_REG);
 	}
-	if (data[0] & 0x00ff)
-		outb(s->state & 0xff, dev->iobase + PCL711_DO_LO);
-	if (data[0] & 0xff00)
-		outb((s->state >> 8), dev->iobase + PCL711_DO_HI);
 
 	data[1] = s->state;
 
@@ -445,112 +477,82 @@
 {
 	const struct pcl711_board *board = comedi_board(dev);
 	struct pcl711_private *devpriv;
-	int ret;
-	unsigned int irq;
 	struct comedi_subdevice *s;
-
-	ret = comedi_request_region(dev, it->options[0], PCL711_SIZE);
-	if (ret)
-		return ret;
-
-	/* grab our IRQ */
-	irq = it->options[1];
-	if (irq > board->maxirq) {
-		printk(KERN_ERR "irq out of range\n");
-		return -EINVAL;
-	}
-	if (irq) {
-		if (request_irq(irq, pcl711_interrupt, 0, dev->board_name,
-			        dev)) {
-			printk(KERN_ERR "unable to allocate irq %u\n", irq);
-			return -EINVAL;
-		} else {
-			printk(KERN_INFO "( irq = %u )\n", irq);
-		}
-	}
-	dev->irq = irq;
-
-	ret = comedi_alloc_subdevices(dev, 4);
-	if (ret)
-		return ret;
+	int ret;
 
 	devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
 	if (!devpriv)
 		return -ENOMEM;
 
-	s = &dev->subdevices[0];
-	/* AI subdevice */
-	s->type = COMEDI_SUBD_AI;
-	s->subdev_flags = SDF_READABLE | SDF_GROUND;
-	s->n_chan = board->n_aichan;
-	s->maxdata = 0xfff;
-	s->len_chanlist = 1;
-	s->range_table = board->ai_range_type;
-	s->insn_read = pcl711_ai_insn;
-	if (irq) {
-		dev->read_subdev = s;
-		s->subdev_flags |= SDF_CMD_READ;
-		s->do_cmdtest = pcl711_ai_cmdtest;
-		s->do_cmd = pcl711_ai_cmd;
+	ret = comedi_request_region(dev, it->options[0], 0x10);
+	if (ret)
+		return ret;
+
+	if (it->options[1] && it->options[1] <= board->maxirq) {
+		ret = request_irq(it->options[1], pcl711_interrupt, 0,
+				  dev->board_name, dev);
+		if (ret == 0)
+			dev->irq = it->options[1];
 	}
 
+	ret = comedi_alloc_subdevices(dev, 4);
+	if (ret)
+		return ret;
+
+	/* Analog Input subdevice */
+	s = &dev->subdevices[0];
+	s->type		= COMEDI_SUBD_AI;
+	s->subdev_flags	= SDF_READABLE | SDF_GROUND;
+	if (board->n_aichan > 8)
+		s->subdev_flags	|= SDF_DIFF;
+	s->n_chan	= board->n_aichan;
+	s->maxdata	= 0xfff;
+	s->range_table	= board->ai_range_type;
+	s->insn_read	= pcl711_ai_insn_read;
+	if (dev->irq) {
+		dev->read_subdev = s;
+		s->subdev_flags	|= SDF_CMD_READ;
+		s->len_chanlist	= 1;
+		s->do_cmdtest	= pcl711_ai_cmdtest;
+		s->do_cmd	= pcl711_ai_cmd;
+		s->cancel	= pcl711_ai_cancel;
+	}
+
+	/* Analog Output subdevice */
 	s = &dev->subdevices[1];
-	/* AO subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;
-	s->n_chan = board->n_aochan;
-	s->maxdata = 0xfff;
-	s->len_chanlist = 1;
-	s->range_table = &range_bipolar5;
-	s->insn_write = pcl711_ao_insn;
-	s->insn_read = pcl711_ao_insn_read;
+	s->type		= COMEDI_SUBD_AO;
+	s->subdev_flags	= SDF_WRITABLE;
+	s->n_chan	= board->n_aochan;
+	s->maxdata	= 0xfff;
+	s->range_table	= &range_bipolar5;
+	s->insn_write	= pcl711_ao_insn_write;
+	s->insn_read	= pcl711_ao_insn_read;
 
+	/* Digital Input subdevice */
 	s = &dev->subdevices[2];
-	/* 16-bit digital input */
-	s->type = COMEDI_SUBD_DI;
-	s->subdev_flags = SDF_READABLE;
-	s->n_chan = 16;
-	s->maxdata = 1;
-	s->len_chanlist = 16;
-	s->range_table = &range_digital;
-	s->insn_bits = pcl711_di_insn_bits;
+	s->type		= COMEDI_SUBD_DI;
+	s->subdev_flags	= SDF_READABLE;
+	s->n_chan	= 16;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= pcl711_di_insn_bits;
 
+	/* Digital Output subdevice */
 	s = &dev->subdevices[3];
-	/* 16-bit digital out */
-	s->type = COMEDI_SUBD_DO;
-	s->subdev_flags = SDF_WRITABLE;
-	s->n_chan = 16;
-	s->maxdata = 1;
-	s->len_chanlist = 16;
-	s->range_table = &range_digital;
-	s->state = 0;
-	s->insn_bits = pcl711_do_insn_bits;
-
-	/*
-	   this is the "base value" for the mode register, which is
-	   used for the irq on the PCL711
-	 */
-	if (board->is_pcl711b)
-		devpriv->mode = (dev->irq << 4);
+	s->type		= COMEDI_SUBD_DO;
+	s->subdev_flags	= SDF_WRITABLE;
+	s->n_chan	= 16;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= pcl711_do_insn_bits;
 
 	/* clear DAC */
-	outb(0, dev->iobase + PCL711_DA0_LO);
-	outb(0, dev->iobase + PCL711_DA0_HI);
-	outb(0, dev->iobase + PCL711_DA1_LO);
-	outb(0, dev->iobase + PCL711_DA1_HI);
-
-	printk(KERN_INFO "\n");
+	pcl711_ao_write(dev, 0, 0x0);
+	pcl711_ao_write(dev, 1, 0x0);
 
 	return 0;
 }
 
-static const struct pcl711_board boardtypes[] = {
-	{ "pcl711", 0, 0, 0, 5, 8, 1, 0, &range_bipolar5 },
-	{ "pcl711b", 1, 0, 0, 5, 8, 1, 7, &range_pcl711b_ai },
-	{ "acl8112hg", 0, 1, 0, 12, 16, 2, 15, &range_acl8112hg_ai },
-	{ "acl8112dg", 0, 1, 1, 9, 16, 2, 15, &range_acl8112dg_ai },
-};
-
 static struct comedi_driver pcl711_driver = {
 	.driver_name	= "pcl711",
 	.module		= THIS_MODULE,
@@ -563,5 +565,5 @@
 module_comedi_driver(pcl711_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for PCL-711 compatible boards");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index a4d0bcc..cf9568e 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -1,230 +1,356 @@
 /*
-    comedi/drivers/pcl726.c
-
-    hardware driver for Advantech cards:
-     card:   PCL-726, PCL-727, PCL-728
-     driver: pcl726,  pcl727,  pcl728
-    and for ADLink cards:
-     card:   ACL-6126, ACL-6128
-     driver: acl6126,  acl6128
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 1998 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-*/
-/*
-Driver: pcl726
-Description: Advantech PCL-726 & compatibles
-Author: ds
-Status: untested
-Devices: [Advantech] PCL-726 (pcl726), PCL-727 (pcl727), PCL-728 (pcl728),
-  [ADLink] ACL-6126 (acl6126), ACL-6128 (acl6128)
-
-Interrupts are not supported.
-
-    Options for PCL-726:
-     [0] - IO Base
-     [2]...[7] - D/A output range for channel 1-6:
-		0: 0-5V, 1: 0-10V, 2: +/-5V, 3: +/-10V,
-		4: 4-20mA, 5: unknown (external reference)
-
-    Options for PCL-727:
-     [0] - IO Base
-     [2]...[13] - D/A output range for channel 1-12:
-		0: 0-5V, 1: 0-10V, 2: +/-5V,
-		3: 4-20mA
-
-    Options for PCL-728 and ACL-6128:
-     [0] - IO Base
-     [2], [3] - D/A output range for channel 1 and 2:
-		0: 0-5V, 1: 0-10V, 2: +/-5V, 3: +/-10V,
-		4: 4-20mA, 5: 0-20mA
-
-    Options for ACL-6126:
-     [0] - IO Base
-     [1] - IRQ (0=disable, 3, 5, 6, 7, 9, 10, 11, 12, 15) (currently ignored)
-     [2]...[7] - D/A output range for channel 1-6:
-		0: 0-5V, 1: 0-10V, 2: +/-5V, 3: +/-10V,
-		4: 4-20mA
-*/
+ * pcl726.c
+ * Comedi driver for 6/12-Channel D/A Output and DIO cards
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1998 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
 /*
-    Thanks to Circuit Specialists for having programming info (!) on
-    their web page.  (http://www.cir.com/)
-*/
+ * Driver: pcl726
+ * Description: Advantech PCL-726 & compatibles
+ * Author: David A. Schleef <ds@schleef.org>
+ * Status: untested
+ * Devices: (Advantech) PCL-726 [pcl726]
+ *	    (Advantech) PCL-727 [pcl727]
+ *	    (Advantech) PCL-728 [pcl728]
+ *	    (ADLink) ACL-6126 [acl6126]
+ *	    (ADLink) ACL-6128 [acl6128]
+ *
+ * Configuration Options:
+ *   [0]  - IO Base
+ *   [1]  - IRQ (ACL-6126 only)
+ *   [2]  - D/A output range for channel 0
+ *   [3]  - D/A output range for channel 1
+ *
+ * Boards with > 2 analog output channels:
+ *   [4]  - D/A output range for channel 2
+ *   [5]  - D/A output range for channel 3
+ *   [6]  - D/A output range for channel 4
+ *   [7]  - D/A output range for channel 5
+ *
+ * Boards with > 6 analog output channels:
+ *   [8]  - D/A output range for channel 6
+ *   [9]  - D/A output range for channel 7
+ *   [10] - D/A output range for channel 8
+ *   [11] - D/A output range for channel 9
+ *   [12] - D/A output range for channel 10
+ *   [13] - D/A output range for channel 11
+ *
+ * For PCL-726 the D/A output ranges are:
+ *   0: 0-5V, 1: 0-10V, 2: +/-5V, 3: +/-10V, 4: 4-20mA, 5: unknown
+ *
+ * For PCL-727:
+ *   0: 0-5V, 1: 0-10V, 2: +/-5V, 3: 4-20mA
+ *
+ * For PCL-728 and ACL-6128:
+ *   0: 0-5V, 1: 0-10V, 2: +/-5V, 3: +/-10V, 4: 4-20mA, 5: 0-20mA
+ *
+ * For ACL-6126:
+ *   0: 0-5V, 1: 0-10V, 2: +/-5V, 3: +/-10V, 4: 4-20mA
+ */
 
 #include <linux/module.h>
+#include <linux/interrupt.h>
+
 #include "../comedidev.h"
 
-#undef ACL6126_IRQ		/* no interrupt support (yet) */
+#include "comedi_fc.h"
 
-#define PCL726_SIZE 16
-#define PCL727_SIZE 32
-#define PCL728_SIZE 8
+#define PCL726_AO_MSB_REG(x)	(0x00 + ((x) * 2))
+#define PCL726_AO_LSB_REG(x)	(0x01 + ((x) * 2))
+#define PCL726_DO_MSB_REG	0x0c
+#define PCL726_DO_LSB_REG	0x0d
+#define PCL726_DI_MSB_REG	0x0e
+#define PCL726_DI_LSB_REG	0x0f
 
-#define PCL726_DAC0_HI 0
-#define PCL726_DAC0_LO 1
-
-#define PCL726_DO_HI 12
-#define PCL726_DO_LO 13
-#define PCL726_DI_HI 14
-#define PCL726_DI_LO 15
-
-#define PCL727_DO_HI 24
-#define PCL727_DO_LO 25
-#define PCL727_DI_HI  0
-#define PCL727_DI_LO  1
+#define PCL727_DI_MSB_REG	0x00
+#define PCL727_DI_LSB_REG	0x01
+#define PCL727_DO_MSB_REG	0x18
+#define PCL727_DO_LSB_REG	0x19
 
 static const struct comedi_lrange *const rangelist_726[] = {
-	&range_unipolar5, &range_unipolar10,
-	&range_bipolar5, &range_bipolar10,
-	&range_4_20mA, &range_unknown
+	&range_unipolar5,
+	&range_unipolar10,
+	&range_bipolar5,
+	&range_bipolar10,
+	&range_4_20mA,
+	&range_unknown
 };
 
 static const struct comedi_lrange *const rangelist_727[] = {
-	&range_unipolar5, &range_unipolar10,
+	&range_unipolar5,
+	&range_unipolar10,
 	&range_bipolar5,
 	&range_4_20mA
 };
 
 static const struct comedi_lrange *const rangelist_728[] = {
-	&range_unipolar5, &range_unipolar10,
-	&range_bipolar5, &range_bipolar10,
-	&range_4_20mA, &range_0_20mA
+	&range_unipolar5,
+	&range_unipolar10,
+	&range_bipolar5,
+	&range_bipolar10,
+	&range_4_20mA,
+	&range_0_20mA
 };
 
 struct pcl726_board {
-
-	const char *name;	/*  driver name */
-	int n_aochan;		/*  num of D/A chans */
-	int num_of_ranges;	/*  num of ranges */
-	unsigned int IRQbits;	/*  allowed interrupts */
-	unsigned int io_range;	/*  len of IO space */
-	char have_dio;		/*  1=card have DI/DO ports */
-	int di_hi;		/*  ports for DI/DO operations */
-	int di_lo;
-	int do_hi;
-	int do_lo;
-	const struct comedi_lrange *const *range_type_list;
-	/*  list of supported ranges */
+	const char *name;
+	unsigned long io_len;
+	unsigned int irq_mask;
+	const struct comedi_lrange *const *ao_ranges;
+	int ao_num_ranges;
+	int ao_nchan;
+	unsigned int have_dio:1;
+	unsigned int is_pcl727:1;
 };
 
-static const struct pcl726_board boardtypes[] = {
-	{"pcl726", 6, 6, 0x0000, PCL726_SIZE, 1,
-	 PCL726_DI_HI, PCL726_DI_LO, PCL726_DO_HI, PCL726_DO_LO,
-	 &rangelist_726[0],},
-	{"pcl727", 12, 4, 0x0000, PCL727_SIZE, 1,
-	 PCL727_DI_HI, PCL727_DI_LO, PCL727_DO_HI, PCL727_DO_LO,
-	 &rangelist_727[0],},
-	{"pcl728", 2, 6, 0x0000, PCL728_SIZE, 0,
-	 0, 0, 0, 0,
-	 &rangelist_728[0],},
-	{"acl6126", 6, 5, 0x96e8, PCL726_SIZE, 1,
-	 PCL726_DI_HI, PCL726_DI_LO, PCL726_DO_HI, PCL726_DO_LO,
-	 &rangelist_726[0],},
-	{"acl6128", 2, 6, 0x0000, PCL728_SIZE, 0,
-	 0, 0, 0, 0,
-	 &rangelist_728[0],},
+static const struct pcl726_board pcl726_boards[] = {
+	{
+		.name		= "pcl726",
+		.io_len		= 0x10,
+		.ao_ranges	= &rangelist_726[0],
+		.ao_num_ranges	= ARRAY_SIZE(rangelist_726),
+		.ao_nchan	= 6,
+		.have_dio	= 1,
+	}, {
+		.name		= "pcl727",
+		.io_len		= 0x20,
+		.ao_ranges	= &rangelist_727[0],
+		.ao_num_ranges	= ARRAY_SIZE(rangelist_727),
+		.ao_nchan	= 12,
+		.have_dio	= 1,
+		.is_pcl727	= 1,
+	}, {
+		.name		= "pcl728",
+		.io_len		= 0x08,
+		.ao_num_ranges	= ARRAY_SIZE(rangelist_728),
+		.ao_ranges	= &rangelist_728[0],
+		.ao_nchan	= 2,
+	}, {
+		.name		= "acl6126",
+		.io_len		= 0x10,
+		.irq_mask	= 0x96e8,
+		.ao_num_ranges	= ARRAY_SIZE(rangelist_726),
+		.ao_ranges	= &rangelist_726[0],
+		.ao_nchan	= 6,
+		.have_dio	= 1,
+	}, {
+		.name		= "acl6128",
+		.io_len		= 0x08,
+		.ao_num_ranges	= ARRAY_SIZE(rangelist_728),
+		.ao_ranges	= &rangelist_728[0],
+		.ao_nchan	= 2,
+	},
 };
 
 struct pcl726_private {
-
-	int bipolar[12];
 	const struct comedi_lrange *rangelist[12];
 	unsigned int ao_readback[12];
+	unsigned int cmd_running:1;
 };
 
-static int pcl726_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
+static int pcl726_intr_insn_bits(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 struct comedi_insn *insn,
+				 unsigned int *data)
+{
+	data[1] = 0;
+	return insn->n;
+}
+
+static int pcl726_intr_cmdtest(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_cmd *cmd)
+{
+	int err = 0;
+
+	/* Step 1 : check if triggers are trivially valid */
+
+	err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
+	err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT);
+	err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW);
+	err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
+	err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
+
+	if (err)
+		return 1;
+
+	/* Step 2a : make sure trigger sources are unique */
+	/* Step 2b : and mutually compatible */
+
+	if (err)
+		return 2;
+
+	/* Step 3: check if arguments are trivially valid */
+
+	err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+	err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+	err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+	err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
+	err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
+
+	if (err)
+		return 3;
+
+	/* step 4: ignored */
+
+	if (err)
+		return 4;
+
+	return 0;
+}
+
+static int pcl726_intr_cmd(struct comedi_device *dev,
+			   struct comedi_subdevice *s)
 {
 	struct pcl726_private *devpriv = dev->private;
-	int hi, lo;
-	int n;
-	int chan = CR_CHAN(insn->chanspec);
 
-	for (n = 0; n < insn->n; n++) {
-		lo = data[n] & 0xff;
-		hi = (data[n] >> 8) & 0xf;
-		if (devpriv->bipolar[chan])
-			hi ^= 0x8;
-		/*
-		 * the programming info did not say which order
-		 * to write bytes.  switch the order of the next
-		 * two lines if you get glitches.
-		 */
-		outb(hi, dev->iobase + PCL726_DAC0_HI + 2 * chan);
-		outb(lo, dev->iobase + PCL726_DAC0_LO + 2 * chan);
-		devpriv->ao_readback[chan] = data[n];
+	devpriv->cmd_running = 1;
+
+	return 0;
+}
+
+static int pcl726_intr_cancel(struct comedi_device *dev,
+			      struct comedi_subdevice *s)
+{
+	struct pcl726_private *devpriv = dev->private;
+
+	devpriv->cmd_running = 0;
+
+	return 0;
+}
+
+static irqreturn_t pcl726_interrupt(int irq, void *d)
+{
+	struct comedi_device *dev = d;
+	struct comedi_subdevice *s = dev->read_subdev;
+	struct pcl726_private *devpriv = dev->private;
+
+	if (devpriv->cmd_running) {
+		pcl726_intr_cancel(dev, s);
+
+		comedi_buf_put(s->async, 0);
+		s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS);
+		comedi_event(dev, s);
 	}
 
-	return n;
+	return IRQ_HANDLED;
+}
+
+static int pcl726_ao_insn_write(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn,
+				unsigned int *data)
+{
+	struct pcl726_private *devpriv = dev->private;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int range = CR_RANGE(insn->chanspec);
+	unsigned int val;
+	int i;
+
+	for (i = 0; i < insn->n; i++) {
+		val = data[i];
+		devpriv->ao_readback[chan] = val;
+
+		/* bipolar data to the DAC is two's complement */
+		if (comedi_chan_range_is_bipolar(s, chan, range))
+			val = comedi_offset_munge(s, val);
+
+		/* order is important, MSB then LSB */
+		outb((val >> 8) & 0xff, dev->iobase + PCL726_AO_MSB_REG(chan));
+		outb(val & 0xff, dev->iobase + PCL726_AO_LSB_REG(chan));
+	}
+
+	return insn->n;
 }
 
 static int pcl726_ao_insn_read(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
 	struct pcl726_private *devpriv = dev->private;
-	int chan = CR_CHAN(insn->chanspec);
-	int n;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	int i;
 
-	for (n = 0; n < insn->n; n++)
-		data[n] = devpriv->ao_readback[chan];
-	return n;
+	for (i = 0; i < insn->n; i++)
+		data[i] = devpriv->ao_readback[chan];
+
+	return insn->n;
 }
 
 static int pcl726_di_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
 	const struct pcl726_board *board = comedi_board(dev);
+	unsigned int val;
 
-	data[1] = inb(dev->iobase + board->di_lo) |
-	    (inb(dev->iobase + board->di_hi) << 8);
+	if (board->is_pcl727) {
+		val = inb(dev->iobase + PCL727_DI_LSB_REG);
+		val |= (inb(dev->iobase + PCL727_DI_MSB_REG) << 8);
+	} else {
+		val = inb(dev->iobase + PCL726_DI_LSB_REG);
+		val |= (inb(dev->iobase + PCL726_DI_MSB_REG) << 8);
+	}
+
+	data[1] = val;
 
 	return insn->n;
 }
 
 static int pcl726_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
 	const struct pcl726_board *board = comedi_board(dev);
+	unsigned long io = dev->iobase;
+	unsigned int mask;
 
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
+		if (board->is_pcl727) {
+			if (mask & 0x00ff)
+				outb(s->state & 0xff, io + PCL727_DO_LSB_REG);
+			if (mask & 0xff00)
+				outb((s->state >> 8), io + PCL727_DO_MSB_REG);
+		} else {
+			if (mask & 0x00ff)
+				outb(s->state & 0xff, io + PCL726_DO_LSB_REG);
+			if (mask & 0xff00)
+				outb((s->state >> 8), io + PCL726_DO_MSB_REG);
+		}
 	}
-	if (data[1] & 0x00ff)
-		outb(s->state & 0xff, dev->iobase + board->do_lo);
-	if (data[1] & 0xff00)
-		outb((s->state >> 8), dev->iobase + board->do_hi);
 
 	data[1] = s->state;
 
 	return insn->n;
 }
 
-static int pcl726_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int pcl726_attach(struct comedi_device *dev,
+			 struct comedi_devconfig *it)
 {
 	const struct pcl726_board *board = comedi_board(dev);
 	struct pcl726_private *devpriv;
 	struct comedi_subdevice *s;
-	int ret, i;
-#ifdef ACL6126_IRQ
-	unsigned int irq;
-#endif
+	int subdev;
+	int ret;
+	int i;
 
-	ret = comedi_request_region(dev, it->options[0], board->io_range);
+	ret = comedi_request_region(dev, it->options[0], board->io_len);
 	if (ret)
 		return ret;
 
@@ -232,97 +358,81 @@
 	if (!devpriv)
 		return -ENOMEM;
 
-	for (i = 0; i < 12; i++) {
-		devpriv->bipolar[i] = 0;
-		devpriv->rangelist[i] = &range_unknown;
-	}
-
-#ifdef ACL6126_IRQ
-	irq = 0;
-	if (boardtypes[board].IRQbits != 0) {	/* board support IRQ */
-		irq = it->options[1];
-		devpriv->first_chan = 2;
-		if (irq) {	/* we want to use IRQ */
-			if (((1 << irq) & boardtypes[board].IRQbits) == 0) {
-				printk(KERN_WARNING
-					", IRQ %d is out of allowed range,"
-					" DISABLING IT", irq);
-				irq = 0;	/* Bad IRQ */
-			} else {
-				if (request_irq(irq, interrupt_pcl818, 0,
-						dev->board_name, dev)) {
-					printk(KERN_WARNING
-						", unable to allocate IRQ %d,"
-						" DISABLING IT", irq);
-					irq = 0;	/* Can't use IRQ */
-				} else {
-					printk(", irq=%d", irq);
-				}
-			}
+	/*
+	 * Hook up the external trigger source interrupt only if the
+	 * user config option is valid and the board supports interrupts.
+	 */
+	if (it->options[1] && (board->irq_mask & (1 << it->options[1]))) {
+		ret = request_irq(it->options[1], pcl726_interrupt, 0,
+				  dev->board_name, dev);
+		if (ret == 0) {
+			/* External trigger source is from Pin-17 of CN3 */
+			dev->irq = it->options[1];
 		}
 	}
 
-	dev->irq = irq;
-#endif
+	/* setup the per-channel analog output range_table_list */
+	for (i = 0; i < 12; i++) {
+		unsigned int opt = it->options[2 + i];
 
-	printk("\n");
+		if (opt < board->ao_num_ranges && i < board->ao_nchan)
+			devpriv->rangelist[i] = board->ao_ranges[opt];
+		else
+			devpriv->rangelist[i] = &range_unknown;
+	}
 
-	ret = comedi_alloc_subdevices(dev, 3);
+	subdev = board->have_dio ? 3 : 1;
+	if (dev->irq)
+		subdev++;
+	ret = comedi_alloc_subdevices(dev, subdev);
 	if (ret)
 		return ret;
 
-	s = &dev->subdevices[0];
-	/* ao */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
-	s->n_chan = board->n_aochan;
-	s->maxdata = 0xfff;
-	s->len_chanlist = 1;
-	s->insn_write = pcl726_ao_insn;
-	s->insn_read = pcl726_ao_insn_read;
+	subdev = 0;
+
+	/* Analog Output subdevice */
+	s = &dev->subdevices[subdev++];
+	s->type		= COMEDI_SUBD_AO;
+	s->subdev_flags	= SDF_WRITABLE | SDF_GROUND;
+	s->n_chan	= board->ao_nchan;
+	s->maxdata	= 0x0fff;
 	s->range_table_list = devpriv->rangelist;
-	for (i = 0; i < board->n_aochan; i++) {
-		int j;
+	s->insn_write	= pcl726_ao_insn_write;
+	s->insn_read	= pcl726_ao_insn_read;
 
-		j = it->options[2 + 1];
-		if ((j < 0) || (j >= board->num_of_ranges)) {
-			printk
-			    ("Invalid range for channel %d! Must be 0<=%d<%d\n",
-			     i, j, board->num_of_ranges - 1);
-			j = 0;
-		}
-		devpriv->rangelist[i] = board->range_type_list[j];
-		if (devpriv->rangelist[i]->range[0].min ==
-		    -devpriv->rangelist[i]->range[0].max)
-			devpriv->bipolar[i] = 1;	/* bipolar range */
+	if (board->have_dio) {
+		/* Digital Input subdevice */
+		s = &dev->subdevices[subdev++];
+		s->type		= COMEDI_SUBD_DI;
+		s->subdev_flags	= SDF_READABLE;
+		s->n_chan	= 16;
+		s->maxdata	= 1;
+		s->insn_bits	= pcl726_di_insn_bits;
+		s->range_table	= &range_digital;
+
+		/* Digital Output subdevice */
+		s = &dev->subdevices[subdev++];
+		s->type		= COMEDI_SUBD_DO;
+		s->subdev_flags	= SDF_WRITABLE;
+		s->n_chan	= 16;
+		s->maxdata	= 1;
+		s->insn_bits	= pcl726_do_insn_bits;
+		s->range_table	= &range_digital;
 	}
 
-	s = &dev->subdevices[1];
-	/* di */
-	if (!board->have_dio) {
-		s->type = COMEDI_SUBD_UNUSED;
-	} else {
-		s->type = COMEDI_SUBD_DI;
-		s->subdev_flags = SDF_READABLE | SDF_GROUND;
-		s->n_chan = 16;
-		s->maxdata = 1;
-		s->len_chanlist = 1;
-		s->insn_bits = pcl726_di_insn_bits;
-		s->range_table = &range_digital;
-	}
-
-	s = &dev->subdevices[2];
-	/* do */
-	if (!board->have_dio) {
-		s->type = COMEDI_SUBD_UNUSED;
-	} else {
-		s->type = COMEDI_SUBD_DO;
-		s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
-		s->n_chan = 16;
-		s->maxdata = 1;
-		s->len_chanlist = 1;
-		s->insn_bits = pcl726_do_insn_bits;
-		s->range_table = &range_digital;
+	if (dev->irq) {
+		/* Digial Input subdevice - Interrupt support */
+		s = &dev->subdevices[subdev++];
+		dev->read_subdev = s;
+		s->type		= COMEDI_SUBD_DI;
+		s->subdev_flags	= SDF_READABLE | SDF_CMD_READ;
+		s->n_chan	= 1;
+		s->maxdata	= 1;
+		s->range_table	= &range_digital;
+		s->insn_bits	= pcl726_intr_insn_bits;
+		s->do_cmdtest	= pcl726_intr_cmdtest;
+		s->do_cmd	= pcl726_intr_cmd;
+		s->cancel	= pcl726_intr_cancel;
 	}
 
 	return 0;
@@ -333,12 +443,12 @@
 	.module		= THIS_MODULE,
 	.attach		= pcl726_attach,
 	.detach		= comedi_legacy_detach,
-	.board_name	= &boardtypes[0].name,
-	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &pcl726_boards[0].name,
+	.num_names	= ARRAY_SIZE(pcl726_boards),
 	.offset		= sizeof(struct pcl726_board),
 };
 module_comedi_driver(pcl726_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for Advantech PCL-726 & compatibles");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index 2a659f2..d041b714 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -167,20 +167,17 @@
 			       unsigned int *data)
 {
 	unsigned long reg = (unsigned long)s->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
+	unsigned int mask;
 
+	mask = comedi_dio_update_state(s, data);
 	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
 		if (mask & 0x00ff)
 			outb(s->state & 0xff, dev->iobase + reg);
-		if ((mask & 0xff00) && (s->n_chan > 8))
+		if ((mask & 0xff00) & (s->n_chan > 8))
 			outb((s->state >> 8) & 0xff, dev->iobase + reg + 1);
-		if ((mask & 0xff0000) && (s->n_chan > 16))
+		if ((mask & 0xff0000) & (s->n_chan > 16))
 			outb((s->state >> 16) & 0xff, dev->iobase + reg + 2);
-		if ((mask & 0xff000000) && (s->n_chan > 24))
+		if ((mask & 0xff000000) & (s->n_chan > 24))
 			outb((s->state >> 24) & 0xff, dev->iobase + reg + 3);
 	}
 
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 03a098900..03315ab 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -355,7 +355,6 @@
 	unsigned int ai_n_chan;	/*  how many channels is measured */
 	unsigned int ai_flags;	/*  flaglist */
 	unsigned int ai_data_len;	/*  len of data buffer */
-	short *ai_data;		/*  data buffer */
 	unsigned int ai_is16b;	/*  =1 we have 16 bit card */
 	unsigned long dmabuf[2];	/*  PTR to DMA buf */
 	unsigned int dmapages[2];	/*  how many pages we have allocated */
@@ -509,19 +508,16 @@
 	return insn->n;
 }
 
-/*
-==============================================================================
-*/
 static int pcl812_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
+	if (comedi_dio_update_state(s, data)) {
 		outb(s->state & 0xff, dev->iobase + PCL812_DO_LO);
 		outb((s->state >> 8), dev->iobase + PCL812_DO_HI);
 	}
+
 	data[1] = s->state;
 
 	return insn->n;
@@ -592,9 +588,9 @@
 
 	if (cmd->convert_src == TRIG_TIMER) {
 		tmp = cmd->convert_arg;
-		i8253_cascade_ns_to_timer(board->i8254_osc_base, &divisor1,
-					  &divisor2, &cmd->convert_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(board->i8254_osc_base,
+					  &divisor1, &divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		if (cmd->convert_arg < board->ai_ns_min)
 			cmd->convert_arg = board->ai_ns_min;
 		if (tmp != cmd->convert_arg)
@@ -640,8 +636,7 @@
 			cmd->convert_arg = board->ai_ns_min;
 		i8253_cascade_ns_to_timer(board->i8254_osc_base,
 					  &divisor1, &divisor2,
-					  &cmd->convert_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+					  &cmd->convert_arg, cmd->flags);
 	}
 
 	start_pacer(dev, -1, 0, 0);	/*  stop pacer */
@@ -665,7 +660,6 @@
 
 	devpriv->ai_flags = cmd->flags;
 	devpriv->ai_data_len = s->async->prealloc_bufsz;
-	devpriv->ai_data = s->async->prealloc_buf;
 	if (cmd->stop_src == TRIG_COUNT) {
 		devpriv->ai_scans = cmd->stop_arg;
 		devpriv->ai_neverending = 0;
@@ -835,7 +829,8 @@
 ==============================================================================
 */
 static void transfer_from_dma_buf(struct comedi_device *dev,
-				  struct comedi_subdevice *s, short *ptr,
+				  struct comedi_subdevice *s,
+				  unsigned short *ptr,
 				  unsigned int bufptr, unsigned int len)
 {
 	struct pcl812_private *devpriv = dev->private;
@@ -873,9 +868,9 @@
 	struct comedi_subdevice *s = &dev->subdevices[0];
 	unsigned long dma_flags;
 	int len, bufptr;
-	short *ptr;
+	unsigned short *ptr;
 
-	ptr = (short *)devpriv->dmabuf[devpriv->next_dma_buf];
+	ptr = (unsigned short *)devpriv->dmabuf[devpriv->next_dma_buf];
 	len = (devpriv->dmabytestomove[devpriv->next_dma_buf] >> 1) -
 	    devpriv->ai_poll_ptr;
 
@@ -1443,40 +1438,40 @@
 
 static const struct pcl812_board boardtypes[] = {
 	{"pcl812", boardPCL812, 16, 0, 2, 16, 16, 0x0fff,
-	 33000, 500, &range_bipolar10, &range_unipolar5,
+	 33000, I8254_OSC_BASE_2MHZ, &range_bipolar10, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 	{"pcl812pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
-	 33000, 500, &range_pcl812pg_ai, &range_unipolar5,
+	 33000, I8254_OSC_BASE_2MHZ, &range_pcl812pg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 	{"acl8112pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_pcl812pg_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_pcl812pg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 	{"acl8112dg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_acl8112dg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
 	{"acl8112hg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_acl8112hg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
 	{"a821pgl", boardA821, 16, 8, 1, 16, 16, 0x0fff,
-	 10000, 500, &range_pcl813b_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_pcl813b_ai, &range_unipolar5,
 	 0x000c, 0x00, PCLx1x_IORANGE, 0},
 	{"a821pglnda", boardA821, 16, 8, 0, 0, 0, 0x0fff,
-	 10000, 500, &range_pcl813b_ai, NULL,
+	 10000, I8254_OSC_BASE_2MHZ, &range_pcl813b_ai, NULL,
 	 0x000c, 0x00, PCLx1x_IORANGE, 0},
 	{"a821pgh", boardA821, 16, 8, 1, 16, 16, 0x0fff,
-	 10000, 500, &range_a821pgh_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_a821pgh_ai, &range_unipolar5,
 	 0x000c, 0x00, PCLx1x_IORANGE, 0},
 	{"a822pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_acl8112dg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 	{"a822pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_acl8112hg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 	{"a823pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 8000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 8000, I8254_OSC_BASE_2MHZ, &range_acl8112dg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 	{"a823pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 8000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 8000, I8254_OSC_BASE_2MHZ, &range_acl8112hg_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 	{"pcl813", boardPCL813, 32, 0, 0, 0, 0, 0x0fff,
 	 0, 0, &range_pcl813b_ai, NULL,
@@ -1491,10 +1486,10 @@
 	 0, 0, &range_iso813_1_ai, NULL,
 	 0x0000, 0x00, PCLx1x_IORANGE, 0},
 	{"acl8216", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
-	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_pcl813b2_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
 	{"a826pg", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
-	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
+	 10000, I8254_OSC_BASE_2MHZ, &range_pcl813b2_ai, &range_unipolar5,
 	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
 };
 
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index f031349..ab9d2bd 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -229,7 +229,7 @@
 	struct comedi_device *dev = d;
 	struct pcl816_private *devpriv = dev->private;
 	struct comedi_subdevice *s = &dev->subdevices[0];
-	int low, hi;
+	unsigned char low, hi;
 	int timeout = 50;	/* wait max 50us */
 
 	while (timeout--) {
@@ -281,7 +281,8 @@
    analog input dma mode 1 & 3, 816 cards
 */
 static void transfer_from_dma_buf(struct comedi_device *dev,
-				  struct comedi_subdevice *s, short *ptr,
+				  struct comedi_subdevice *s,
+				  unsigned short *ptr,
 				  unsigned int bufptr, unsigned int len)
 {
 	struct pcl816_private *devpriv = dev->private;
@@ -324,7 +325,7 @@
 	struct comedi_subdevice *s = &dev->subdevices[0];
 	int len, bufptr, this_dma_buf;
 	unsigned long dma_flags;
-	short *ptr;
+	unsigned short *ptr;
 
 	disable_dma(devpriv->dma);
 	this_dma_buf = devpriv->next_dma_buf;
@@ -352,7 +353,7 @@
 	devpriv->dma_runs_to_end--;
 	outb(0, dev->iobase + PCL816_CLRINT);	/* clear INT request */
 
-	ptr = (short *)devpriv->dmabuf[this_dma_buf];
+	ptr = (unsigned short *)devpriv->dmabuf[this_dma_buf];
 
 	len = (devpriv->hwdmasize[0] >> 1) - devpriv->ai_poll_ptr;
 	bufptr = devpriv->ai_poll_ptr;
@@ -481,8 +482,7 @@
 		tmp = cmd->convert_arg;
 		i8253_cascade_ns_to_timer(board->i8254_osc_base,
 					  &divisor1, &divisor2,
-					  &cmd->convert_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+					  &cmd->convert_arg, cmd->flags);
 		if (cmd->convert_arg < board->ai_ns_min)
 			cmd->convert_arg = board->ai_ns_min;
 		if (tmp != cmd->convert_arg)
@@ -528,9 +528,9 @@
 		if (cmd->convert_arg < board->ai_ns_min)
 			cmd->convert_arg = board->ai_ns_min;
 
-		i8253_cascade_ns_to_timer(board->i8254_osc_base, &divisor1,
-					  &divisor2, &cmd->convert_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(board->i8254_osc_base,
+					  &divisor1, &divisor2,
+					  &cmd->convert_arg, cmd->flags);
 
 		/*  PCL816 crash if any divisor is set to 1 */
 		if (divisor1 == 1) {
@@ -666,7 +666,8 @@
 	}
 
 	transfer_from_dma_buf(dev, s,
-			      (short *)devpriv->dmabuf[devpriv->next_dma_buf],
+			      (unsigned short *)devpriv->dmabuf[devpriv->
+								next_dma_buf],
 			      devpriv->ai_poll_ptr, top2);
 
 	devpriv->ai_poll_ptr = top1;	/*  new buffer position */
@@ -1105,7 +1106,7 @@
 	 0xffff,		/*  D/A maxdata */
 	 1024,
 	 1,			/*  ao chan list */
-	 100},
+	 I8254_OSC_BASE_10MHZ},
 	{"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
 	 &range_pcl816, PCLx1x_RANGE,
 	 0x00fc,
@@ -1114,7 +1115,7 @@
 	 0x3fff,
 	 1024,
 	 1,
-	 100},
+	 I8254_OSC_BASE_10MHZ},
 };
 
 static struct comedi_driver pcl816_driver = {
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index a52ba82..9e4d7e8 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -289,7 +289,6 @@
 	unsigned int *ai_chanlist;	/*  actaul chanlist */
 	unsigned int ai_flags;	/*  flaglist */
 	unsigned int ai_data_len;	/*  len of data buffer */
-	short *ai_data;		/*  data buffer */
 	unsigned int ai_timer1;	/*  timers */
 	unsigned int ai_timer2;
 	struct comedi_subdevice *sub_ai;	/*  ptr to AI subdevice */
@@ -418,21 +417,15 @@
 	return insn->n;
 }
 
-/*
-==============================================================================
-   DIGITAL OUTPUT MODE0, 818 cards
-
-   only one sample per call is supported
-*/
 static int pcl818_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
-	s->state &= ~data[0];
-	s->state |= (data[0] & data[1]);
-
-	outb(s->state & 0xff, dev->iobase + PCL818_DO_LO);
-	outb((s->state >> 8), dev->iobase + PCL818_DO_HI);
+	if (comedi_dio_update_state(s, data)) {
+		outb(s->state & 0xff, dev->iobase + PCL818_DO_LO);
+		outb((s->state >> 8), dev->iobase + PCL818_DO_HI);
+	}
 
 	data[1] = s->state;
 
@@ -449,7 +442,7 @@
 	struct comedi_device *dev = d;
 	struct pcl818_private *devpriv = dev->private;
 	struct comedi_subdevice *s = &dev->subdevices[0];
-	int low;
+	unsigned char low;
 	int timeout = 50;	/* wait max 50us */
 
 	while (timeout--) {
@@ -511,7 +504,7 @@
 	struct comedi_subdevice *s = &dev->subdevices[0];
 	int i, len, bufptr;
 	unsigned long flags;
-	short *ptr;
+	unsigned short *ptr;
 
 	disable_dma(devpriv->dma);
 	devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
@@ -534,7 +527,7 @@
 
 	devpriv->dma_runs_to_end--;
 	outb(0, dev->iobase + PCL818_CLRINT);	/* clear INT request */
-	ptr = (short *)devpriv->dmabuf[1 - devpriv->next_dma_buf];
+	ptr = (unsigned short *)devpriv->dmabuf[1 - devpriv->next_dma_buf];
 
 	len = devpriv->hwdmasize[0] >> 1;
 	bufptr = 0;
@@ -588,7 +581,8 @@
 	struct comedi_device *dev = d;
 	struct pcl818_private *devpriv = dev->private;
 	struct comedi_subdevice *s = &dev->subdevices[0];
-	int i, len, lo;
+	int i, len;
+	unsigned char lo;
 
 	outb(0, dev->iobase + PCL818_FI_INTCLR);	/*  clear fifo int request */
 
@@ -806,8 +800,9 @@
 		devpriv->neverending_ai = 1;	/* well, user want neverending */
 
 	if (mode == 1) {
-		i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
-					  &divisor2, &cmd->convert_arg,
+		i8253_cascade_ns_to_timer(devpriv->i8253_osc_base,
+					  &divisor1, &divisor2,
+					  &cmd->convert_arg,
 					  TRIG_ROUND_NEAREST);
 		if (divisor1 == 1) {	/* PCL718/818 crash if any divisor is set to 1 */
 			divisor1 = 2;
@@ -1040,9 +1035,9 @@
 
 	if (cmd->convert_src == TRIG_TIMER) {
 		tmp = cmd->convert_arg;
-		i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
-					  &divisor2, &cmd->convert_arg,
-					  cmd->flags & TRIG_ROUND_MASK);
+		i8253_cascade_ns_to_timer(devpriv->i8253_osc_base,
+					  &divisor1, &divisor2,
+					  &cmd->convert_arg, cmd->flags);
 		if (cmd->convert_arg < board->ns_min)
 			cmd->convert_arg = board->ns_min;
 		if (tmp != cmd->convert_arg)
@@ -1077,7 +1072,6 @@
 	devpriv->ai_chanlist = cmd->chanlist;
 	devpriv->ai_flags = cmd->flags;
 	devpriv->ai_data_len = s->async->prealloc_bufsz;
-	devpriv->ai_data = s->async->prealloc_buf;
 	devpriv->ai_timer1 = 0;
 	devpriv->ai_timer2 = 0;
 
@@ -1438,9 +1432,9 @@
 
 	/* select 1/10MHz oscilator */
 	if ((it->options[3] == 0) || (it->options[3] == 10))
-		devpriv->i8253_osc_base = 100;
+		devpriv->i8253_osc_base = I8254_OSC_BASE_10MHZ;
 	else
-		devpriv->i8253_osc_base = 1000;
+		devpriv->i8253_osc_base = I8254_OSC_BASE_1MHZ;
 
 	/* max sampling speed */
 	devpriv->ns_min = board->ns_min;
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index 423f236..fe482fd 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -75,12 +75,6 @@
 	return -ETIME;
 }
 
-static bool pcmad_range_is_bipolar(struct comedi_subdevice *s,
-				   unsigned int range)
-{
-	return s->range_table->range[range].min < 0;
-}
-
 static int pcmad_ai_insn_read(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
 			      struct comedi_insn *insn,
@@ -106,7 +100,7 @@
 		if (s->maxdata == 0x0fff)
 			val >>= 4;
 
-		if (pcmad_range_is_bipolar(s, range)) {
+		if (comedi_range_is_bipolar(s, range)) {
 			/* munge the two's complement value */
 			val ^= ((s->maxdata + 1) >> 1);
 		}
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 574443d..14cee3a 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -553,12 +553,11 @@
 										val |= (1U << n);
 								}
 								/* Write the scan to the buffer. */
-								if (comedi_buf_put(s->async, ((short *)&val)[0])
+								if (comedi_buf_put(s->async, val)
 								    &&
 								    comedi_buf_put
 								    (s->async,
-								     ((short *)
-								      &val)[1])) {
+								     val >> 16)) {
 									s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS);
 								} else {
 									/* Overflow! Stop acquisition!! */
@@ -846,7 +845,7 @@
 		    CR_RANGE(insn->chanspec), aref = CR_AREF(insn->chanspec);
 		unsigned char command_byte = 0;
 		unsigned iooffset = 0;
-		short sample, adc_adjust = 0;
+		unsigned short sample, adc_adjust = 0;
 
 		if (chan > 7)
 			chan -= 8, iooffset = 4;	/*
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 67e2bb1..954fa96 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -315,8 +315,8 @@
 	}
 
 	/* Write the scan to the buffer. */
-	if (comedi_buf_put(s->async, ((short *)&val)[0]) &&
-	    comedi_buf_put(s->async, ((short *)&val)[1])) {
+	if (comedi_buf_put(s->async, val) &&
+	    comedi_buf_put(s->async, val >> 16)) {
 		s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS);
 	} else {
 		/* Overflow! Stop acquisition!! */
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 9775d36..96a4695 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -208,8 +208,7 @@
 	case buffer:
 		while (!((status = inb(dev->iobase + DAQP_STATUS))
 			 & DAQP_STATUS_FIFO_EMPTY)) {
-
-			short data;
+			unsigned short data;
 
 			if (status & DAQP_STATUS_DATA_LOST) {
 				s->async->events |=
@@ -690,18 +689,12 @@
 			     unsigned int *data)
 {
 	struct daqp_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 
 	if (devpriv->stop)
 		return -EIO;
 
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		outb(s->state, dev->iobase + DAQP_DIGITAL_IO);
-	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 93c980c..44c8712 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -394,11 +394,8 @@
 	long ai_count;		/* total transfer size (samples) */
 	int xfer_count;		/* # to transfer data. 0->1/2FIFO */
 	int flags;		/* flag event modes */
-
-	unsigned char chan_is_bipolar[RTD_MAX_CHANLIST / 8];	/* bit array */
-
+	DECLARE_BITMAP(chan_is_bipolar, RTD_MAX_CHANLIST);
 	unsigned int ao_readback[2];
-
 	unsigned fifosz;
 };
 
@@ -407,14 +404,6 @@
 #define DMA0_ACTIVE	0x02	/* DMA0 is active */
 #define DMA1_ACTIVE	0x04	/* DMA1 is active */
 
-/* Macros for accessing channel list bit array */
-#define CHAN_ARRAY_TEST(array, index) \
-	(((array)[(index)/8] >> ((index) & 0x7)) & 0x1)
-#define CHAN_ARRAY_SET(array, index) \
-	(((array)[(index)/8] |= 1 << ((index) & 0x7)))
-#define CHAN_ARRAY_CLEAR(array, index) \
-	(((array)[(index)/8] &= ~(1 << ((index) & 0x7))))
-
 /*
   Given a desired period and the clock period (both in ns),
   return the proper counter value (divider-1).
@@ -478,17 +467,17 @@
 		/* +-5 range */
 		r |= 0x000;
 		r |= (range & 0x7) << 4;
-		CHAN_ARRAY_SET(devpriv->chan_is_bipolar, index);
+		__set_bit(index, devpriv->chan_is_bipolar);
 	} else if (range < board->range_uni10) {
 		/* +-10 range */
 		r |= 0x100;
 		r |= ((range - board->range_bip10) & 0x7) << 4;
-		CHAN_ARRAY_SET(devpriv->chan_is_bipolar, index);
+		__set_bit(index, devpriv->chan_is_bipolar);
 	} else {
 		/* +10 range */
 		r |= 0x200;
 		r |= ((range - board->range_uni10) & 0x7) << 4;
-		CHAN_ARRAY_CLEAR(devpriv->chan_is_bipolar, index);
+		__clear_bit(index, devpriv->chan_is_bipolar);
 	}
 
 	switch (aref) {
@@ -602,7 +591,7 @@
 
 	/* convert n samples */
 	for (n = 0; n < insn->n; n++) {
-		s16 d;
+		unsigned short d;
 		/* trigger conversion */
 		writew(0, devpriv->las0 + LAS0_ADC);
 
@@ -619,11 +608,10 @@
 		d = readw(devpriv->las1 + LAS1_ADC_FIFO);
 		/*printk ("rtd520: Got 0x%x after %d usec\n", d, ii+1); */
 		d = d >> 3;	/* low 3 bits are marker lines */
-		if (CHAN_ARRAY_TEST(devpriv->chan_is_bipolar, 0))
+		if (test_bit(0, devpriv->chan_is_bipolar))
 			/* convert to comedi unsigned data */
-			data[n] = d + 2048;
-		else
-			data[n] = d;
+			d = comedi_offset_munge(s, d);
+		data[n] = d & s->maxdata;
 	}
 
 	/* return the number of samples read/written */
@@ -643,8 +631,7 @@
 	int ii;
 
 	for (ii = 0; ii < count; ii++) {
-		short sample;
-		s16 d;
+		unsigned short d;
 
 		if (0 == devpriv->ai_count) {	/* done */
 			d = readw(devpriv->las1 + LAS1_ADC_FIFO);
@@ -653,14 +640,12 @@
 
 		d = readw(devpriv->las1 + LAS1_ADC_FIFO);
 		d = d >> 3;	/* low 3 bits are marker lines */
-		if (CHAN_ARRAY_TEST(devpriv->chan_is_bipolar,
-				    s->async->cur_chan)) {
+		if (test_bit(s->async->cur_chan, devpriv->chan_is_bipolar))
 			/* convert to comedi unsigned data */
-			sample = d + 2048;
-		} else
-			sample = d;
+			d = comedi_offset_munge(s, d);
+		d &= s->maxdata;
 
-		if (!comedi_buf_put(s->async, sample))
+		if (!comedi_buf_put(s->async, d))
 			return -1;
 
 		if (devpriv->ai_count > 0)	/* < 0, means read forever */
@@ -677,22 +662,19 @@
 	struct rtd_private *devpriv = dev->private;
 
 	while (readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY) {
-		short sample;
-		s16 d = readw(devpriv->las1 + LAS1_ADC_FIFO);
+		unsigned short d = readw(devpriv->las1 + LAS1_ADC_FIFO);
 
 		if (0 == devpriv->ai_count) {	/* done */
 			continue;	/* read rest */
 		}
 
 		d = d >> 3;	/* low 3 bits are marker lines */
-		if (CHAN_ARRAY_TEST(devpriv->chan_is_bipolar,
-				    s->async->cur_chan)) {
+		if (test_bit(s->async->cur_chan, devpriv->chan_is_bipolar))
 			/* convert to comedi unsigned data */
-			sample = d + 2048;
-		} else
-			sample = d;
+			d = comedi_offset_munge(s, d);
+		d &= s->maxdata;
 
-		if (!comedi_buf_put(s->async, sample))
+		if (!comedi_buf_put(s->async, d))
 			return -1;
 
 		if (devpriv->ai_count > 0)	/* < 0, means read forever */
@@ -1217,15 +1199,9 @@
 			     unsigned int *data)
 {
 	struct rtd_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data))
 		writew(s->state & 0xff, devpriv->las0 + LAS0_DIO0);
-	}
 
 	data[1] = readw(devpriv->las0 + LAS0_DIO0) & 0xff;
 
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index cbb4ba5..e1f3671 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -267,13 +267,7 @@
 			       struct comedi_insn *insn,
 			       unsigned int *data)
 {
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
+	if (comedi_dio_update_state(s, data)) {
 		/* Outputs are inverted... */
 		outb(s->state ^ 0xff, dev->iobase + RTI800_DO);
 	}
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index d629463..9950f59 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -499,14 +499,11 @@
 
 static int s526_dio_insn_bits(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data)
+			      struct comedi_insn *insn,
+			      unsigned int *data)
 {
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-
+	if (comedi_dio_update_state(s, data))
 		outw(s->state, dev->iobase + REG_DIO);
-	}
 
 	data[1] = inw(dev->iobase + REG_DIO) & 0xff;
 
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index d22b95d..6815cfe 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -1,63 +1,63 @@
 /*
-  comedi/drivers/s626.c
-  Sensoray s626 Comedi driver
-
-  COMEDI - Linux Control and Measurement Device Interface
-  Copyright (C) 2000 David A. Schleef <ds@schleef.org>
-
-  Based on Sensoray Model 626 Linux driver Version 0.2
-  Copyright (C) 2002-2004 Sensoray Co., Inc.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-*/
+ * comedi/drivers/s626.c
+ * Sensoray s626 Comedi driver
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * Based on Sensoray Model 626 Linux driver Version 0.2
+ * Copyright (C) 2002-2004 Sensoray Co., Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
 /*
-Driver: s626
-Description: Sensoray 626 driver
-Devices: [Sensoray] 626 (s626)
-Authors: Gianluca Palli <gpalli@deis.unibo.it>,
-Updated: Fri, 15 Feb 2008 10:28:42 +0000
-Status: experimental
+ * Driver: s626
+ * Description: Sensoray 626 driver
+ * Devices: [Sensoray] 626 (s626)
+ * Authors: Gianluca Palli <gpalli@deis.unibo.it>,
+ * Updated: Fri, 15 Feb 2008 10:28:42 +0000
+ * Status: experimental
 
-Configuration options: not applicable, uses PCI auto config
+ * Configuration options: not applicable, uses PCI auto config
 
-INSN_CONFIG instructions:
-  analog input:
-   none
-
-  analog output:
-   none
-
-  digital channel:
-   s626 has 3 dio subdevices (2,3 and 4) each with 16 i/o channels
-   supported configuration options:
-   INSN_CONFIG_DIO_QUERY
-   COMEDI_INPUT
-   COMEDI_OUTPUT
-
-  encoder:
-   Every channel must be configured before reading.
-
-   Example code
-
-   insn.insn=INSN_CONFIG;   //configuration instruction
-   insn.n=1;                //number of operation (must be 1)
-   insn.data=&initialvalue; //initial value loaded into encoder
-				//during configuration
-   insn.subdev=5;           //encoder subdevice
-   insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); //encoder_channel
-							//to configure
-
-   comedi_do_insn(cf,&insn); //executing configuration
-*/
+ * INSN_CONFIG instructions:
+ *   analog input:
+ *    none
+ *
+ *   analog output:
+ *    none
+ *
+ *   digital channel:
+ *    s626 has 3 dio subdevices (2,3 and 4) each with 16 i/o channels
+ *    supported configuration options:
+ *    INSN_CONFIG_DIO_QUERY
+ *    COMEDI_INPUT
+ *    COMEDI_OUTPUT
+ *
+ *   encoder:
+ *    Every channel must be configured before reading.
+ *
+ *   Example code
+ *
+ *    insn.insn=INSN_CONFIG;   //configuration instruction
+ *    insn.n=1;                //number of operation (must be 1)
+ *    insn.data=&initialvalue; //initial value loaded into encoder
+ *                             //during configuration
+ *    insn.subdev=5;           //encoder subdevice
+ *    insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); //encoder_channel
+ *                                                         //to configure
+ *
+ *    comedi_do_insn(cf,&insn); //executing configuration
+ */
 
 #include <linux/module.h>
 #include <linux/delay.h>
@@ -71,68 +71,91 @@
 #include "comedi_fc.h"
 #include "s626.h"
 
-#define PCI_VENDOR_ID_S626 0x1131
-#define PCI_DEVICE_ID_S626 0x7146
-#define PCI_SUBVENDOR_ID_S626 0x6000
-#define PCI_SUBDEVICE_ID_S626 0x0272
+struct s626_buffer_dma {
+	dma_addr_t physical_base;
+	void *logical_base;
+};
 
 struct s626_private {
 	void __iomem *mmio;
-	uint8_t ai_cmd_running;	/*  ai_cmd is running */
-	uint8_t ai_continous;	/*  continous acquisition */
-	int ai_sample_count;	/*  number of samples to acquire */
-	unsigned int ai_sample_timer;
-	/*  time between samples in  units of the timer */
-	int ai_convert_count;	/*  conversion counter */
-	unsigned int ai_convert_timer;
-	/*  time between conversion in  units of the timer */
-	uint16_t CounterIntEnabs;
-	/* Counter interrupt enable  mask for MISC2 register. */
-	uint8_t AdcItems;	/* Number of items in ADC poll  list. */
-	struct bufferDMA RPSBuf;	/* DMA buffer used to hold ADC (RPS1) program. */
-	struct bufferDMA ANABuf;
-	/* DMA buffer used to receive ADC data and hold DAC data. */
-	uint32_t *pDacWBuf;
-	/* Pointer to logical adrs of DMA buffer used to hold DAC  data. */
-	uint16_t Dacpol;	/* Image of DAC polarity register. */
-	uint8_t TrimSetpoint[12];	/* Images of TrimDAC setpoints */
-	/* Charge Enabled (0 or WRMISC2_CHARGE_ENABLE). */
-	uint32_t I2CAdrs;
-	/* I2C device address for onboard EEPROM (board rev dependent). */
-	/*   short         I2Cards; */
+	uint8_t ai_cmd_running;		/* ai_cmd is running */
+	uint8_t ai_continuous;		/* continuous acquisition */
+	int ai_sample_count;		/* number of samples to acquire */
+	unsigned int ai_sample_timer;	/* time between samples in
+					 * units of the timer */
+	int ai_convert_count;		/* conversion counter */
+	unsigned int ai_convert_timer;	/* time between conversion in
+					 * units of the timer */
+	uint16_t counter_int_enabs;	/* counter interrupt enable mask
+					 * for MISC2 register */
+	uint8_t adc_items;		/* number of items in ADC poll list */
+	struct s626_buffer_dma rps_buf;	/* DMA buffer used to hold ADC (RPS1)
+					 * program */
+	struct s626_buffer_dma ana_buf;	/* DMA buffer used to receive ADC data
+					 * and hold DAC data */
+	uint32_t *dac_wbuf;		/* pointer to logical adrs of DMA buffer
+					 * used to hold DAC data */
+	uint16_t dacpol;		/* image of DAC polarity register */
+	uint8_t trim_setpoint[12];	/* images of TrimDAC setpoints */
+	uint32_t i2c_adrs;		/* I2C device address for onboard EEPROM
+					 * (board rev dependent) */
 	unsigned int ao_readback[S626_DAC_CHANNELS];
 };
 
-/*  COUNTER OBJECT ------------------------------------------------ */
-struct enc_private {
-	/*  Pointers to functions that differ for A and B counters: */
-	uint16_t(*GetEnable) (struct comedi_device *dev, struct enc_private *);	/* Return clock enable. */
-	uint16_t(*GetIntSrc) (struct comedi_device *dev, struct enc_private *);	/* Return interrupt source. */
-	uint16_t(*GetLoadTrig) (struct comedi_device *dev, struct enc_private *);	/* Return preload trigger source. */
-	uint16_t(*GetMode) (struct comedi_device *dev, struct enc_private *);	/* Return standardized operating mode. */
-	void (*PulseIndex) (struct comedi_device *dev, struct enc_private *);	/* Generate soft index strobe. */
-	void (*SetEnable) (struct comedi_device *dev, struct enc_private *, uint16_t enab);	/* Program clock enable. */
-	void (*SetIntSrc) (struct comedi_device *dev, struct enc_private *, uint16_t IntSource);	/* Program interrupt source. */
-	void (*SetLoadTrig) (struct comedi_device *dev, struct enc_private *, uint16_t Trig);	/* Program preload trigger source. */
-	void (*SetMode) (struct comedi_device *dev, struct enc_private *, uint16_t Setup, uint16_t DisableIntSrc);	/* Program standardized operating mode. */
-	void (*ResetCapFlags) (struct comedi_device *dev, struct enc_private *);	/* Reset event capture flags. */
+/* COUNTER OBJECT ------------------------------------------------ */
+struct s626_enc_info {
+	/* Pointers to functions that differ for A and B counters: */
+	/* Return clock enable. */
+	uint16_t(*get_enable)(struct comedi_device *dev,
+			      const struct s626_enc_info *k);
+	/* Return interrupt source. */
+	uint16_t(*get_int_src)(struct comedi_device *dev,
+			       const struct s626_enc_info *k);
+	/* Return preload trigger source. */
+	uint16_t(*get_load_trig)(struct comedi_device *dev,
+				 const struct s626_enc_info *k);
+	/* Return standardized operating mode. */
+	uint16_t(*get_mode)(struct comedi_device *dev,
+			    const struct s626_enc_info *k);
+	/* Generate soft index strobe. */
+	void (*pulse_index)(struct comedi_device *dev,
+			    const struct s626_enc_info *k);
+	/* Program clock enable. */
+	void (*set_enable)(struct comedi_device *dev,
+			   const struct s626_enc_info *k, uint16_t enab);
+	/* Program interrupt source. */
+	void (*set_int_src)(struct comedi_device *dev,
+			    const struct s626_enc_info *k, uint16_t int_source);
+	/* Program preload trigger source. */
+	void (*set_load_trig)(struct comedi_device *dev,
+			      const struct s626_enc_info *k, uint16_t trig);
+	/* Program standardized operating mode. */
+	void (*set_mode)(struct comedi_device *dev,
+			 const struct s626_enc_info *k, uint16_t setup,
+			 uint16_t disable_int_src);
+	/* Reset event capture flags. */
+	void (*reset_cap_flags)(struct comedi_device *dev,
+				const struct s626_enc_info *k);
 
-	uint16_t MyCRA;		/*    Address of CRA register. */
-	uint16_t MyCRB;		/*    Address of CRB register. */
-	uint16_t MyLatchLsw;	/*    Address of Latch least-significant-word */
-	/*    register. */
-	uint16_t MyEventBits[4];	/*    Bit translations for IntSrc -->RDMISC2. */
+	uint16_t my_cra;	/* address of CRA register */
+	uint16_t my_crb;	/* address of CRB register */
+	uint16_t my_latch_lsw;	/* address of Latch least-significant-word
+				 * register */
+	uint16_t my_event_bits[4]; /* bit translations for IntSrc -->RDMISC2 */
 };
 
-#define encpriv ((struct enc_private *)(dev->subdevices+5)->private)
+/* Counter overflow/index event flag masks for RDMISC2. */
+#define S626_INDXMASK(C) (1 << (((C) > 2) ? ((C) * 2 - 1) : ((C) * 2 +  4)))
+#define S626_OVERMASK(C) (1 << (((C) > 2) ? ((C) * 2 + 5) : ((C) * 2 + 10)))
+#define S626_EVBITS(C)	{ 0, S626_OVERMASK(C), S626_INDXMASK(C), \
+			  S626_OVERMASK(C) | S626_INDXMASK(C) }
 
-/*  Counter overflow/index event flag masks for RDMISC2. */
-#define INDXMASK(C)		(1 << (((C) > 2) ? ((C) * 2 - 1) : ((C) * 2 +  4)))
-#define OVERMASK(C)		(1 << (((C) > 2) ? ((C) * 2 + 5) : ((C) * 2 + 10)))
-#define EVBITS(C)		{ 0, OVERMASK(C), INDXMASK(C), OVERMASK(C) | INDXMASK(C) }
-
-/*  Translation table to map IntSrc into equivalent RDMISC2 event flag  bits. */
-/* static const uint16_t EventBits[][4] = { EVBITS(0), EVBITS(1), EVBITS(2), EVBITS(3), EVBITS(4), EVBITS(5) }; */
+/*
+ * Translation table to map IntSrc into equivalent RDMISC2 event flag  bits.
+ * static const uint16_t s626_event_bits[][4] =
+ *     { S626_EVBITS(0), S626_EVBITS(1), S626_EVBITS(2), S626_EVBITS(3),
+ *       S626_EVBITS(4), S626_EVBITS(5) };
+ */
 
 /*
  * Enable/disable a function or test status bit(s) that are accessed
@@ -144,6 +167,7 @@
 	struct s626_private *devpriv = dev->private;
 	unsigned int val = (cmd << 16) | cmd;
 
+	mmiowb();
 	writel(val, devpriv->mmio + reg);
 }
 
@@ -153,6 +177,7 @@
 	struct s626_private *devpriv = dev->private;
 
 	writel(cmd << 16 , devpriv->mmio + reg);
+	mmiowb();
 }
 
 static bool s626_mc_test(struct comedi_device *dev,
@@ -166,15 +191,10 @@
 	return (val & cmd) ? true : false;
 }
 
-#define BUGFIX_STREG(REGADRS)   (REGADRS - 4)
+#define S626_BUGFIX_STREG(REGADRS)   ((REGADRS) - 4)
 
-/*  Write a time slot control record to TSL2. */
-#define VECTPORT(VECTNUM)		(P_TSL2 + ((VECTNUM) << 2))
-
-/*  Code macros used for constructing I2C command bytes. */
-#define I2C_B2(ATTR, VAL)	(((ATTR) << 6) | ((VAL) << 24))
-#define I2C_B1(ATTR, VAL)	(((ATTR) << 4) | ((VAL) << 16))
-#define I2C_B0(ATTR, VAL)	(((ATTR) << 2) | ((VAL) <<  8))
+/* Write a time slot control record to TSL2. */
+#define S626_VECTPORT(VECTNUM)		(S626_P_TSL2 + ((VECTNUM) << 2))
 
 static const struct comedi_lrange s626_range_table = {
 	2, {
@@ -183,178 +203,182 @@
 	}
 };
 
-/*  Execute a DEBI transfer.  This must be called from within a */
-/*  critical section. */
-static void DEBItransfer(struct comedi_device *dev)
+/*
+ * Execute a DEBI transfer.  This must be called from within a critical section.
+ */
+static void s626_debi_transfer(struct comedi_device *dev)
 {
 	struct s626_private *devpriv = dev->private;
 
 	/* Initiate upload of shadow RAM to DEBI control register */
-	s626_mc_enable(dev, MC2_UPLD_DEBI, P_MC2);
+	s626_mc_enable(dev, S626_MC2_UPLD_DEBI, S626_P_MC2);
 
 	/*
 	 * Wait for completion of upload from shadow RAM to
 	 * DEBI control register.
 	 */
-	while (!s626_mc_test(dev, MC2_UPLD_DEBI, P_MC2))
+	while (!s626_mc_test(dev, S626_MC2_UPLD_DEBI, S626_P_MC2))
 		;
 
 	/* Wait until DEBI transfer is done */
-	while (readl(devpriv->mmio + P_PSR) & PSR_DEBI_S)
+	while (readl(devpriv->mmio + S626_P_PSR) & S626_PSR_DEBI_S)
 		;
 }
 
-/*  Initialize the DEBI interface for all transfers. */
-
-static uint16_t DEBIread(struct comedi_device *dev, uint16_t addr)
+/*
+ * Read a value from a gate array register.
+ */
+static uint16_t s626_debi_read(struct comedi_device *dev, uint16_t addr)
 {
 	struct s626_private *devpriv = dev->private;
 
 	/* Set up DEBI control register value in shadow RAM */
-	writel(DEBI_CMD_RDWORD | addr, devpriv->mmio + P_DEBICMD);
+	writel(S626_DEBI_CMD_RDWORD | addr, devpriv->mmio + S626_P_DEBICMD);
 
 	/*  Execute the DEBI transfer. */
-	DEBItransfer(dev);
+	s626_debi_transfer(dev);
 
-	return readl(devpriv->mmio + P_DEBIAD);
+	return readl(devpriv->mmio + S626_P_DEBIAD);
 }
 
-/*  Write a value to a gate array register. */
-static void DEBIwrite(struct comedi_device *dev, uint16_t addr, uint16_t wdata)
+/*
+ * Write a value to a gate array register.
+ */
+static void s626_debi_write(struct comedi_device *dev, uint16_t addr,
+			    uint16_t wdata)
 {
 	struct s626_private *devpriv = dev->private;
 
 	/* Set up DEBI control register value in shadow RAM */
-	writel(DEBI_CMD_WRWORD | addr, devpriv->mmio + P_DEBICMD);
-	writel(wdata, devpriv->mmio + P_DEBIAD);
+	writel(S626_DEBI_CMD_WRWORD | addr, devpriv->mmio + S626_P_DEBICMD);
+	writel(wdata, devpriv->mmio + S626_P_DEBIAD);
 
 	/*  Execute the DEBI transfer. */
-	DEBItransfer(dev);
+	s626_debi_transfer(dev);
 }
 
-/* Replace the specified bits in a gate array register.  Imports: mask
+/*
+ * Replace the specified bits in a gate array register.  Imports: mask
  * specifies bits that are to be preserved, wdata is new value to be
  * or'd with the masked original.
  */
-static void DEBIreplace(struct comedi_device *dev, unsigned int addr,
-			unsigned int mask, unsigned int wdata)
+static void s626_debi_replace(struct comedi_device *dev, unsigned int addr,
+			      unsigned int mask, unsigned int wdata)
 {
 	struct s626_private *devpriv = dev->private;
 	unsigned int val;
 
 	addr &= 0xffff;
-	writel(DEBI_CMD_RDWORD | addr, devpriv->mmio + P_DEBICMD);
-	DEBItransfer(dev);
+	writel(S626_DEBI_CMD_RDWORD | addr, devpriv->mmio + S626_P_DEBICMD);
+	s626_debi_transfer(dev);
 
-	writel(DEBI_CMD_WRWORD | addr, devpriv->mmio + P_DEBICMD);
-	val = readl(devpriv->mmio + P_DEBIAD);
+	writel(S626_DEBI_CMD_WRWORD | addr, devpriv->mmio + S626_P_DEBICMD);
+	val = readl(devpriv->mmio + S626_P_DEBIAD);
 	val &= mask;
 	val |= wdata;
-	writel(val & 0xffff, devpriv->mmio + P_DEBIAD);
-	DEBItransfer(dev);
+	writel(val & 0xffff, devpriv->mmio + S626_P_DEBIAD);
+	s626_debi_transfer(dev);
 }
 
 /* **************  EEPROM ACCESS FUNCTIONS  ************** */
 
-static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
+static uint32_t s626_i2c_handshake(struct comedi_device *dev, uint32_t val)
 {
 	struct s626_private *devpriv = dev->private;
 	unsigned int ctrl;
 
 	/* Write I2C command to I2C Transfer Control shadow register */
-	writel(val, devpriv->mmio + P_I2CCTRL);
+	writel(val, devpriv->mmio + S626_P_I2CCTRL);
 
 	/*
 	 * Upload I2C shadow registers into working registers and
 	 * wait for upload confirmation.
 	 */
-	s626_mc_enable(dev, MC2_UPLD_IIC, P_MC2);
-	while (!s626_mc_test(dev, MC2_UPLD_IIC, P_MC2))
+	s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
+	while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
 		;
 
 	/* Wait until I2C bus transfer is finished or an error occurs */
 	do {
-		ctrl = readl(devpriv->mmio + P_I2CCTRL);
-	} while ((ctrl & (I2C_BUSY | I2C_ERR)) == I2C_BUSY);
+		ctrl = readl(devpriv->mmio + S626_P_I2CCTRL);
+	} while ((ctrl & (S626_I2C_BUSY | S626_I2C_ERR)) == S626_I2C_BUSY);
 
 	/* Return non-zero if I2C error occurred */
-	return ctrl & I2C_ERR;
+	return ctrl & S626_I2C_ERR;
 }
 
-/*  Read uint8_t from EEPROM. */
-static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr)
+/* Read uint8_t from EEPROM. */
+static uint8_t s626_i2c_read(struct comedi_device *dev, uint8_t addr)
 {
 	struct s626_private *devpriv = dev->private;
 
-	/*  Send EEPROM target address. */
-	if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, I2CW)
-			 /* Byte2 = I2C command: write to I2C EEPROM  device. */
-			 | I2C_B1(I2C_ATTRSTOP, addr)
-			 /* Byte1 = EEPROM internal target address. */
-			 | I2C_B0(I2C_ATTRNOP, 0))) {	/*  Byte0 = Not sent. */
-		/*  Abort function and declare error if handshake failed. */
+	/*
+	 * Send EEPROM target address:
+	 *  Byte2 = I2C command: write to I2C EEPROM device.
+	 *  Byte1 = EEPROM internal target address.
+	 *  Byte0 = Not sent.
+	 */
+	if (s626_i2c_handshake(dev, S626_I2C_B2(S626_I2C_ATTRSTART,
+						devpriv->i2c_adrs) |
+				    S626_I2C_B1(S626_I2C_ATTRSTOP, addr) |
+				    S626_I2C_B0(S626_I2C_ATTRNOP, 0)))
+		/* Abort function and declare error if handshake failed. */
 		return 0;
-	}
-	/*  Execute EEPROM read. */
-	if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, I2CR)
 
-			 /*  Byte2 = I2C */
-			 /*  command: read */
-			 /*  from I2C EEPROM */
-			 /*  device. */
-			 |I2C_B1(I2C_ATTRSTOP, 0)
-
-			 /*  Byte1 receives */
-			 /*  uint8_t from */
-			 /*  EEPROM. */
-			 |I2C_B0(I2C_ATTRNOP, 0))) {	/*  Byte0 = Not  sent. */
-
-		/*  Abort function and declare error if handshake failed. */
+	/*
+	 * Execute EEPROM read:
+	 *  Byte2 = I2C command: read from I2C EEPROM device.
+	 *  Byte1 receives uint8_t from EEPROM.
+	 *  Byte0 = Not sent.
+	 */
+	if (s626_i2c_handshake(dev, S626_I2C_B2(S626_I2C_ATTRSTART,
+					   (devpriv->i2c_adrs | 1)) |
+				    S626_I2C_B1(S626_I2C_ATTRSTOP, 0) |
+				    S626_I2C_B0(S626_I2C_ATTRNOP, 0)))
+		/* Abort function and declare error if handshake failed. */
 		return 0;
-	}
 
-	return (readl(devpriv->mmio + P_I2CCTRL) >> 16) & 0xff;
+	return (readl(devpriv->mmio + S626_P_I2CCTRL) >> 16) & 0xff;
 }
 
 /* ***********  DAC FUNCTIONS *********** */
 
-/*  Slot 0 base settings. */
-#define VECT0	(XSD2 | RSD3 | SIB_A2)
-/*  Slot 0 always shifts in  0xFF and store it to  FB_BUFFER2. */
+/* TrimDac LogicalChan-to-PhysicalChan mapping table. */
+static const uint8_t s626_trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
 
-/*  TrimDac LogicalChan-to-PhysicalChan mapping table. */
-static uint8_t trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
+/* TrimDac LogicalChan-to-EepromAdrs mapping table. */
+static const uint8_t s626_trimadrs[] = {
+	0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63
+};
 
-/*  TrimDac LogicalChan-to-EepromAdrs mapping table. */
-static uint8_t trimadrs[] = { 0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63 };
-
-/* Private helper function: Transmit serial data to DAC via Audio
+/*
+ * Private helper function: Transmit serial data to DAC via Audio
  * channel 2.  Assumes: (1) TSL2 slot records initialized, and (2)
- * Dacpol contains valid target image.
+ * dacpol contains valid target image.
  */
-static void SendDAC(struct comedi_device *dev, uint32_t val)
+static void s626_send_dac(struct comedi_device *dev, uint32_t val)
 {
 	struct s626_private *devpriv = dev->private;
 
 	/* START THE SERIAL CLOCK RUNNING ------------- */
 
-	/* Assert DAC polarity control and enable gating of DAC serial clock
+	/*
+	 * Assert DAC polarity control and enable gating of DAC serial clock
 	 * and audio bit stream signals.  At this point in time we must be
 	 * assured of being in time slot 0.  If we are not in slot 0, the
 	 * serial clock and audio stream signals will be disabled; this is
-	 * because the following DEBIwrite statement (which enables signals
-	 * to be passed through the gate array) would execute before the
-	 * trailing edge of WS1/WS3 (which turns off the signals), thus
+	 * because the following s626_debi_write statement (which enables
+	 * signals to be passed through the gate array) would execute before
+	 * the trailing edge of WS1/WS3 (which turns off the signals), thus
 	 * causing the signals to be inactive during the DAC write.
 	 */
-	DEBIwrite(dev, LP_DACPOL, devpriv->Dacpol);
+	s626_debi_write(dev, S626_LP_DACPOL, devpriv->dacpol);
 
 	/* TRANSFER OUTPUT DWORD VALUE INTO A2'S OUTPUT FIFO ---------------- */
 
 	/* Copy DAC setpoint value to DAC's output DMA buffer. */
-
-	/* writel(val, devpriv->mmio + (uint32_t)devpriv->pDacWBuf); */
-	*devpriv->pDacWBuf = val;
+	/* writel(val, devpriv->mmio + (uint32_t)devpriv->dac_wbuf); */
+	*devpriv->dac_wbuf = val;
 
 	/*
 	 * Enable the output DMA transfer. This will cause the DMAC to copy
@@ -362,56 +386,62 @@
 	 * then immediately terminate because the protection address is
 	 * reached upon transfer of the first DWORD value.
 	 */
-	s626_mc_enable(dev, MC1_A2OUT, P_MC1);
+	s626_mc_enable(dev, S626_MC1_A2OUT, S626_P_MC1);
 
-	/*  While the DMA transfer is executing ... */
+	/* While the DMA transfer is executing ... */
 
 	/*
 	 * Reset Audio2 output FIFO's underflow flag (along with any
 	 * other FIFO underflow/overflow flags). When set, this flag
 	 * will indicate that we have emerged from slot 0.
 	 */
-	writel(ISR_AFOU, devpriv->mmio + P_ISR);
+	writel(S626_ISR_AFOU, devpriv->mmio + S626_P_ISR);
 
-	/* Wait for the DMA transfer to finish so that there will be data
+	/*
+	 * Wait for the DMA transfer to finish so that there will be data
 	 * available in the FIFO when time slot 1 tries to transfer a DWORD
 	 * from the FIFO to the output buffer register.  We test for DMA
 	 * Done by polling the DMAC enable flag; this flag is automatically
 	 * cleared when the transfer has finished.
 	 */
-	while (readl(devpriv->mmio + P_MC1) & MC1_A2OUT)
+	while (readl(devpriv->mmio + S626_P_MC1) & S626_MC1_A2OUT)
 		;
 
 	/* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
 
-	/* FIFO data is now available, so we enable execution of time slots
+	/*
+	 * FIFO data is now available, so we enable execution of time slots
 	 * 1 and higher by clearing the EOS flag in slot 0.  Note that SD3
 	 * will be shifted in and stored in FB_BUFFER2 for end-of-slot-list
 	 * detection.
 	 */
-	writel(XSD2 | RSD3 | SIB_A2, devpriv->mmio + VECTPORT(0));
+	writel(S626_XSD2 | S626_RSD3 | S626_SIB_A2,
+	       devpriv->mmio + S626_VECTPORT(0));
 
-	/* Wait for slot 1 to execute to ensure that the Packet will be
+	/*
+	 * Wait for slot 1 to execute to ensure that the Packet will be
 	 * transmitted.  This is detected by polling the Audio2 output FIFO
 	 * underflow flag, which will be set when slot 1 execution has
 	 * finished transferring the DAC's data DWORD from the output FIFO
 	 * to the output buffer register.
 	 */
-	while (!(readl(devpriv->mmio + P_SSR) & SSR_AF2_OUT))
+	while (!(readl(devpriv->mmio + S626_P_SSR) & S626_SSR_AF2_OUT))
 		;
 
-	/* Set up to trap execution at slot 0 when the TSL sequencer cycles
+	/*
+	 * Set up to trap execution at slot 0 when the TSL sequencer cycles
 	 * back to slot 0 after executing the EOS in slot 5.  Also,
 	 * simultaneously shift out and in the 0x00 that is ALWAYS the value
 	 * stored in the last byte to be shifted out of the FIFO's DWORD
 	 * buffer register.
 	 */
-	writel(XSD2 | XFIFO_2 | RSD2 | SIB_A2 | EOS,
-	       devpriv->mmio + VECTPORT(0));
+	writel(S626_XSD2 | S626_XFIFO_2 | S626_RSD2 | S626_SIB_A2 | S626_EOS,
+	       devpriv->mmio + S626_VECTPORT(0));
 
 	/* WAIT FOR THE TRANSACTION TO FINISH ----------------------- */
 
-	/* Wait for the TSL to finish executing all time slots before
+	/*
+	 * Wait for the TSL to finish executing all time slots before
 	 * exiting this function.  We must do this so that the next DAC
 	 * write doesn't start, thereby enabling clock/chip select signals:
 	 *
@@ -428,17 +458,19 @@
 	 *    we test for the FB_BUFFER2 MSB contents to be equal to 0xFF.  If
 	 *    the TSL has not yet finished executing slot 5 ...
 	 */
-	if (readl(devpriv->mmio + P_FB_BUFFER2) & 0xff000000) {
-		/* The trap was set on time and we are still executing somewhere
+	if (readl(devpriv->mmio + S626_P_FB_BUFFER2) & 0xff000000) {
+		/*
+		 * The trap was set on time and we are still executing somewhere
 		 * in slots 2-5, so we now wait for slot 0 to execute and trap
 		 * TSL execution.  This is detected when FB_BUFFER2 MSB changes
 		 * from 0xFF to 0x00, which slot 0 causes to happen by shifting
 		 * out/in on SD2 the 0x00 that is always referenced by slot 5.
 		 */
-		while (readl(devpriv->mmio + P_FB_BUFFER2) & 0xff000000)
+		while (readl(devpriv->mmio + S626_P_FB_BUFFER2) & 0xff000000)
 			;
 	}
-	/* Either (1) we were too late setting the slot 0 trap; the TSL
+	/*
+	 * Either (1) we were too late setting the slot 0 trap; the TSL
 	 * sequencer restarted slot 0 before we could set the EOS trap flag,
 	 * or (2) we were not late and execution is now trapped at slot 0.
 	 * In either case, we must now change slot 0 so that it will store
@@ -446,37 +478,46 @@
 	 * In order to do this, we reprogram slot 0 so that it will shift in
 	 * SD3, which is driven only by a pull-up resistor.
 	 */
-	writel(RSD3 | SIB_A2 | EOS, devpriv->mmio + VECTPORT(0));
+	writel(S626_RSD3 | S626_SIB_A2 | S626_EOS,
+	       devpriv->mmio + S626_VECTPORT(0));
 
-	/* Wait for slot 0 to execute, at which time the TSL is setup for
+	/*
+	 * Wait for slot 0 to execute, at which time the TSL is setup for
 	 * the next DAC write.  This is detected when FB_BUFFER2 MSB changes
 	 * from 0x00 to 0xFF.
 	 */
-	while (!(readl(devpriv->mmio + P_FB_BUFFER2) & 0xff000000))
+	while (!(readl(devpriv->mmio + S626_P_FB_BUFFER2) & 0xff000000))
 		;
 }
 
-/*  Private helper function: Write setpoint to an application DAC channel. */
-static void SetDAC(struct comedi_device *dev, uint16_t chan, short dacdata)
+/*
+ * Private helper function: Write setpoint to an application DAC channel.
+ */
+static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
+			 unsigned short dacdata)
 {
 	struct s626_private *devpriv = dev->private;
-	register uint16_t signmask;
-	register uint32_t WSImage;
+	uint16_t signmask;
+	uint32_t ws_image;
+	uint32_t val;
 
-	/*  Adjust DAC data polarity and set up Polarity Control Register */
-	/*  image. */
+	/*
+	 * Adjust DAC data polarity and set up Polarity Control Register image.
+	 */
 	signmask = 1 << chan;
 	if (dacdata < 0) {
 		dacdata = -dacdata;
-		devpriv->Dacpol |= signmask;
-	} else
-		devpriv->Dacpol &= ~signmask;
+		devpriv->dacpol |= signmask;
+	} else {
+		devpriv->dacpol &= ~signmask;
+	}
 
-	/*  Limit DAC setpoint value to valid range. */
-	if ((uint16_t) dacdata > 0x1FFF)
+	/* Limit DAC setpoint value to valid range. */
+	if ((uint16_t)dacdata > 0x1FFF)
 		dacdata = 0x1FFF;
 
-	/* Set up TSL2 records (aka "vectors") for DAC update.  Vectors V2
+	/*
+	 * Set up TSL2 records (aka "vectors") for DAC update.  Vectors V2
 	 * and V3 transmit the setpoint to the target DAC.  V4 and V5 send
 	 * data to a non-existent TrimDac channel just to keep the clock
 	 * running after sending data to the target DAC.  This is necessary
@@ -487,140 +528,792 @@
 	 */
 
 	/* Choose DAC chip select to be asserted */
-	WSImage = (chan & 2) ? WS1 : WS2;
+	ws_image = (chan & 2) ? S626_WS1 : S626_WS2;
 	/* Slot 2: Transmit high data byte to target DAC */
-	writel(XSD2 | XFIFO_1 | WSImage, devpriv->mmio + VECTPORT(2));
+	writel(S626_XSD2 | S626_XFIFO_1 | ws_image,
+	       devpriv->mmio + S626_VECTPORT(2));
 	/* Slot 3: Transmit low data byte to target DAC */
-	writel(XSD2 | XFIFO_0 | WSImage, devpriv->mmio + VECTPORT(3));
+	writel(S626_XSD2 | S626_XFIFO_0 | ws_image,
+	       devpriv->mmio + S626_VECTPORT(3));
 	/* Slot 4: Transmit to non-existent TrimDac channel to keep clock */
-	writel(XSD2 | XFIFO_3 | WS3, devpriv->mmio + VECTPORT(4));
+	writel(S626_XSD2 | S626_XFIFO_3 | S626_WS3,
+	       devpriv->mmio + S626_VECTPORT(4));
 	/* Slot 5: running after writing target DAC's low data byte */
-	writel(XSD2 | XFIFO_2 | WS3 | EOS, devpriv->mmio + VECTPORT(5));
+	writel(S626_XSD2 | S626_XFIFO_2 | S626_WS3 | S626_EOS,
+	       devpriv->mmio + S626_VECTPORT(5));
 
-	/*  Construct and transmit target DAC's serial packet:
-	 * ( A10D DDDD ),( DDDD DDDD ),( 0x0F ),( 0x00 ) where A is chan<0>,
+	/*
+	 * Construct and transmit target DAC's serial packet:
+	 * (A10D DDDD), (DDDD DDDD), (0x0F), (0x00) where A is chan<0>,
 	 * and D<12:0> is the DAC setpoint.  Append a WORD value (that writes
 	 * to a  non-existent TrimDac channel) that serves to keep the clock
 	 * running after the packet has been sent to the target DAC.
 	 */
-	SendDAC(dev, 0x0F000000
-		/* Continue clock after target DAC data (write to non-existent trimdac). */
-		| 0x00004000
-		/* Address the two main dual-DAC devices (TSL's chip select enables
-		 * target device). */
-		| ((uint32_t) (chan & 1) << 15)
-		/*  Address the DAC channel within the  device. */
-		| (uint32_t) dacdata);	/*  Include DAC setpoint data. */
-
+	val = 0x0F000000;	/* Continue clock after target DAC data
+				 * (write to non-existent trimdac). */
+	val |= 0x00004000;	/* Address the two main dual-DAC devices
+				 * (TSL's chip select enables target device). */
+	val |= ((uint32_t)(chan & 1) << 15);	/* Address the DAC channel
+						 * within the device. */
+	val |= (uint32_t)dacdata;	/* Include DAC setpoint data. */
+	s626_send_dac(dev, val);
 }
 
-static void WriteTrimDAC(struct comedi_device *dev, uint8_t LogicalChan,
-			 uint8_t DacData)
+static void s626_write_trim_dac(struct comedi_device *dev, uint8_t logical_chan,
+				uint8_t dac_data)
 {
 	struct s626_private *devpriv = dev->private;
 	uint32_t chan;
 
-	/*  Save the new setpoint in case the application needs to read it back later. */
-	devpriv->TrimSetpoint[LogicalChan] = (uint8_t) DacData;
+	/*
+	 * Save the new setpoint in case the application needs to read it back
+	 * later.
+	 */
+	devpriv->trim_setpoint[logical_chan] = (uint8_t)dac_data;
 
-	/*  Map logical channel number to physical channel number. */
-	chan = (uint32_t) trimchan[LogicalChan];
+	/* Map logical channel number to physical channel number. */
+	chan = s626_trimchan[logical_chan];
 
-	/* Set up TSL2 records for TrimDac write operation.  All slots shift
+	/*
+	 * Set up TSL2 records for TrimDac write operation.  All slots shift
 	 * 0xFF in from pulled-up SD3 so that the end of the slot sequence
 	 * can be detected.
 	 */
 
 	/* Slot 2: Send high uint8_t to target TrimDac */
-	writel(XSD2 | XFIFO_1 | WS3, devpriv->mmio + VECTPORT(2));
+	writel(S626_XSD2 | S626_XFIFO_1 | S626_WS3,
+	       devpriv->mmio + S626_VECTPORT(2));
 	/* Slot 3: Send low uint8_t to target TrimDac */
-	writel(XSD2 | XFIFO_0 | WS3, devpriv->mmio + VECTPORT(3));
+	writel(S626_XSD2 | S626_XFIFO_0 | S626_WS3,
+	       devpriv->mmio + S626_VECTPORT(3));
 	/* Slot 4: Send NOP high uint8_t to DAC0 to keep clock running */
-	writel(XSD2 | XFIFO_3 | WS1, devpriv->mmio + VECTPORT(4));
+	writel(S626_XSD2 | S626_XFIFO_3 | S626_WS1,
+	       devpriv->mmio + S626_VECTPORT(4));
 	/* Slot 5: Send NOP low  uint8_t to DAC0 */
-	writel(XSD2 | XFIFO_2 | WS1 | EOS, devpriv->mmio + VECTPORT(5));
+	writel(S626_XSD2 | S626_XFIFO_2 | S626_WS1 | S626_EOS,
+	       devpriv->mmio + S626_VECTPORT(5));
 
-	/* Construct and transmit target DAC's serial packet:
-	 * ( 0000 AAAA ), ( DDDD DDDD ),( 0x00 ),( 0x00 ) where A<3:0> is the
+	/*
+	 * Construct and transmit target DAC's serial packet:
+	 * (0000 AAAA), (DDDD DDDD), (0x00), (0x00) where A<3:0> is the
 	 * DAC channel's address, and D<7:0> is the DAC setpoint.  Append a
 	 * WORD value (that writes a channel 0 NOP command to a non-existent
 	 * main DAC channel) that serves to keep the clock running after the
 	 * packet has been sent to the target DAC.
 	 */
 
-	/*  Address the DAC channel within the trimdac device. */
-	SendDAC(dev, ((uint32_t) chan << 8)
-		| (uint32_t) DacData);	/*  Include DAC setpoint data. */
+	/*
+	 * Address the DAC channel within the trimdac device.
+	 * Include DAC setpoint data.
+	 */
+	s626_send_dac(dev, (chan << 8) | dac_data);
 }
 
-static void LoadTrimDACs(struct comedi_device *dev)
+static void s626_load_trim_dacs(struct comedi_device *dev)
 {
-	register uint8_t i;
+	uint8_t i;
 
-	/*  Copy TrimDac setpoint values from EEPROM to TrimDacs. */
-	for (i = 0; i < ARRAY_SIZE(trimchan); i++)
-		WriteTrimDAC(dev, i, I2Cread(dev, trimadrs[i]));
+	/* Copy TrimDac setpoint values from EEPROM to TrimDacs. */
+	for (i = 0; i < ARRAY_SIZE(s626_trimchan); i++)
+		s626_write_trim_dac(dev, i,
+				    s626_i2c_read(dev, s626_trimadrs[i]));
 }
 
 /* ******  COUNTER FUNCTIONS  ******* */
-/* All counter functions address a specific counter by means of the
+
+/*
+ * All counter functions address a specific counter by means of the
  * "Counter" argument, which is a logical counter number.  The Counter
  * argument may have any of the following legal values: 0=0A, 1=1A,
  * 2=2A, 3=0B, 4=1B, 5=2B.
  */
 
-/*  Read a counter's output latch. */
-static uint32_t ReadLatch(struct comedi_device *dev, struct enc_private *k)
+/*
+ * Read a counter's output latch.
+ */
+static uint32_t s626_read_latch(struct comedi_device *dev,
+				const struct s626_enc_info *k)
 {
-	register uint32_t value;
+	uint32_t value;
 
-	/*  Latch counts and fetch LSW of latched counts value. */
-	value = (uint32_t) DEBIread(dev, k->MyLatchLsw);
+	/* Latch counts and fetch LSW of latched counts value. */
+	value = s626_debi_read(dev, k->my_latch_lsw);
 
-	/*  Fetch MSW of latched counts and combine with LSW. */
-	value |= ((uint32_t) DEBIread(dev, k->MyLatchLsw + 2) << 16);
+	/* Fetch MSW of latched counts and combine with LSW. */
+	value |= ((uint32_t)s626_debi_read(dev, k->my_latch_lsw + 2) << 16);
 
-	/*  Return latched counts. */
+	/* Return latched counts. */
 	return value;
 }
 
-/* Return/set a counter pair's latch trigger source.  0: On read
+/*
+ * Return/set a counter pair's latch trigger source.  0: On read
  * access, 1: A index latches A, 2: B index latches B, 3: A overflow
  * latches B.
  */
-static void SetLatchSource(struct comedi_device *dev, struct enc_private *k,
-			   uint16_t value)
+static void s626_set_latch_source(struct comedi_device *dev,
+				  const struct s626_enc_info *k, uint16_t value)
 {
-	DEBIreplace(dev, k->MyCRB,
-		    ~(CRBMSK_INTCTRL | CRBMSK_LATCHSRC),
-		    value << CRBBIT_LATCHSRC);
+	s626_debi_replace(dev, k->my_crb,
+			  ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_LATCHSRC),
+			  S626_SET_CRB_LATCHSRC(value));
 }
 
-/*  Write value into counter preload register. */
-static void Preload(struct comedi_device *dev, struct enc_private *k,
-		    uint32_t value)
+/*
+ * Write value into counter preload register.
+ */
+static void s626_preload(struct comedi_device *dev,
+			 const struct s626_enc_info *k, uint32_t value)
 {
-	DEBIwrite(dev, (uint16_t) (k->MyLatchLsw), (uint16_t) value);
-	DEBIwrite(dev, (uint16_t) (k->MyLatchLsw + 2),
-		  (uint16_t) (value >> 16));
+	s626_debi_write(dev, k->my_latch_lsw, value);
+	s626_debi_write(dev, k->my_latch_lsw + 2, value >> 16);
 }
 
-static unsigned int s626_ai_reg_to_uint(int data)
+/* ******  PRIVATE COUNTER FUNCTIONS ****** */
+
+/*
+ * Reset a counter's index and overflow event capture flags.
+ */
+static void s626_reset_cap_flags_a(struct comedi_device *dev,
+				   const struct s626_enc_info *k)
 {
-	unsigned int tempdata;
-
-	tempdata = (data >> 18);
-	if (tempdata & 0x2000)
-		tempdata &= 0x1fff;
-	else
-		tempdata += (1 << 13);
-
-	return tempdata;
+	s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
+			  (S626_SET_CRB_INTRESETCMD(1) |
+			   S626_SET_CRB_INTRESET_A(1)));
 }
 
-/* static unsigned int s626_uint_to_reg(struct comedi_subdevice *s, int data){ */
-/*   return 0; */
-/* } */
+static void s626_reset_cap_flags_b(struct comedi_device *dev,
+				   const struct s626_enc_info *k)
+{
+	s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
+			  (S626_SET_CRB_INTRESETCMD(1) |
+			   S626_SET_CRB_INTRESET_B(1)));
+}
+
+/*
+ * Return counter setup in a format (COUNTER_SETUP) that is consistent
+ * for both A and B counters.
+ */
+static uint16_t s626_get_mode_a(struct comedi_device *dev,
+				const struct s626_enc_info *k)
+{
+	uint16_t cra;
+	uint16_t crb;
+	uint16_t setup;
+	unsigned cntsrc, clkmult, clkpol, encmode;
+
+	/* Fetch CRA and CRB register images. */
+	cra = s626_debi_read(dev, k->my_cra);
+	crb = s626_debi_read(dev, k->my_crb);
+
+	/*
+	 * Populate the standardized counter setup bit fields.
+	 */
+	setup =
+		/* LoadSrc  = LoadSrcA. */
+		S626_SET_STD_LOADSRC(S626_GET_CRA_LOADSRC_A(cra)) |
+		/* LatchSrc = LatchSrcA. */
+		S626_SET_STD_LATCHSRC(S626_GET_CRB_LATCHSRC(crb)) |
+		/* IntSrc   = IntSrcA. */
+		S626_SET_STD_INTSRC(S626_GET_CRA_INTSRC_A(cra)) |
+		/* IndxSrc  = IndxSrcA. */
+		S626_SET_STD_INDXSRC(S626_GET_CRA_INDXSRC_A(cra)) |
+		/* IndxPol  = IndxPolA. */
+		S626_SET_STD_INDXPOL(S626_GET_CRA_INDXPOL_A(cra)) |
+		/* ClkEnab  = ClkEnabA. */
+		S626_SET_STD_CLKENAB(S626_GET_CRB_CLKENAB_A(crb));
+
+	/* Adjust mode-dependent parameters. */
+	cntsrc = S626_GET_CRA_CNTSRC_A(cra);
+	if (cntsrc & S626_CNTSRC_SYSCLK) {
+		/* Timer mode (CntSrcA<1> == 1): */
+		encmode = S626_ENCMODE_TIMER;
+		/* Set ClkPol to indicate count direction (CntSrcA<0>). */
+		clkpol = cntsrc & 1;
+		/* ClkMult must be 1x in Timer mode. */
+		clkmult = S626_CLKMULT_1X;
+	} else {
+		/* Counter mode (CntSrcA<1> == 0): */
+		encmode = S626_ENCMODE_COUNTER;
+		/* Pass through ClkPol. */
+		clkpol = S626_GET_CRA_CLKPOL_A(cra);
+		/* Force ClkMult to 1x if not legal, else pass through. */
+		clkmult = S626_GET_CRA_CLKMULT_A(cra);
+		if (clkmult == S626_CLKMULT_SPECIAL)
+			clkmult = S626_CLKMULT_1X;
+	}
+	setup |= S626_SET_STD_ENCMODE(encmode) | S626_SET_STD_CLKMULT(clkmult) |
+		 S626_SET_STD_CLKPOL(clkpol);
+
+	/* Return adjusted counter setup. */
+	return setup;
+}
+
+static uint16_t s626_get_mode_b(struct comedi_device *dev,
+				const struct s626_enc_info *k)
+{
+	uint16_t cra;
+	uint16_t crb;
+	uint16_t setup;
+	unsigned cntsrc, clkmult, clkpol, encmode;
+
+	/* Fetch CRA and CRB register images. */
+	cra = s626_debi_read(dev, k->my_cra);
+	crb = s626_debi_read(dev, k->my_crb);
+
+	/*
+	 * Populate the standardized counter setup bit fields.
+	 */
+	setup =
+		/* IntSrc   = IntSrcB. */
+		S626_SET_STD_INTSRC(S626_GET_CRB_INTSRC_B(crb)) |
+		/* LatchSrc = LatchSrcB. */
+		S626_SET_STD_LATCHSRC(S626_GET_CRB_LATCHSRC(crb)) |
+		/* LoadSrc  = LoadSrcB. */
+		S626_SET_STD_LOADSRC(S626_GET_CRB_LOADSRC_B(crb)) |
+		/* IndxPol  = IndxPolB. */
+		S626_SET_STD_INDXPOL(S626_GET_CRB_INDXPOL_B(crb)) |
+		/* ClkEnab  = ClkEnabB. */
+		S626_SET_STD_CLKENAB(S626_GET_CRB_CLKENAB_B(crb)) |
+		/* IndxSrc  = IndxSrcB. */
+		S626_SET_STD_INDXSRC(S626_GET_CRA_INDXSRC_B(cra));
+
+	/* Adjust mode-dependent parameters. */
+	cntsrc = S626_GET_CRA_CNTSRC_B(cra);
+	clkmult = S626_GET_CRB_CLKMULT_B(crb);
+	if (clkmult == S626_CLKMULT_SPECIAL) {
+		/* Extender mode (ClkMultB == S626_CLKMULT_SPECIAL): */
+		encmode = S626_ENCMODE_EXTENDER;
+		/* Indicate multiplier is 1x. */
+		clkmult = S626_CLKMULT_1X;
+		/* Set ClkPol equal to Timer count direction (CntSrcB<0>). */
+		clkpol = cntsrc & 1;
+	} else if (cntsrc & S626_CNTSRC_SYSCLK) {
+		/* Timer mode (CntSrcB<1> == 1): */
+		encmode = S626_ENCMODE_TIMER;
+		/* Indicate multiplier is 1x. */
+		clkmult = S626_CLKMULT_1X;
+		/* Set ClkPol equal to Timer count direction (CntSrcB<0>). */
+		clkpol = cntsrc & 1;
+	} else {
+		/* If Counter mode (CntSrcB<1> == 0): */
+		encmode = S626_ENCMODE_COUNTER;
+		/* Clock multiplier is passed through. */
+		/* Clock polarity is passed through. */
+		clkpol = S626_GET_CRB_CLKPOL_B(crb);
+	}
+	setup |= S626_SET_STD_ENCMODE(encmode) | S626_SET_STD_CLKMULT(clkmult) |
+		 S626_SET_STD_CLKPOL(clkpol);
+
+	/* Return adjusted counter setup. */
+	return setup;
+}
+
+/*
+ * Set the operating mode for the specified counter.  The setup
+ * parameter is treated as a COUNTER_SETUP data type.  The following
+ * parameters are programmable (all other parms are ignored): ClkMult,
+ * ClkPol, ClkEnab, IndexSrc, IndexPol, LoadSrc.
+ */
+static void s626_set_mode_a(struct comedi_device *dev,
+			    const struct s626_enc_info *k, uint16_t setup,
+			    uint16_t disable_int_src)
+{
+	struct s626_private *devpriv = dev->private;
+	uint16_t cra;
+	uint16_t crb;
+	unsigned cntsrc, clkmult, clkpol;
+
+	/* Initialize CRA and CRB images. */
+	/* Preload trigger is passed through. */
+	cra = S626_SET_CRA_LOADSRC_A(S626_GET_STD_LOADSRC(setup));
+	/* IndexSrc is passed through. */
+	cra |= S626_SET_CRA_INDXSRC_A(S626_GET_STD_INDXSRC(setup));
+
+	/* Reset any pending CounterA event captures. */
+	crb = S626_SET_CRB_INTRESETCMD(1) | S626_SET_CRB_INTRESET_A(1);
+	/* Clock enable is passed through. */
+	crb |= S626_SET_CRB_CLKENAB_A(S626_GET_STD_CLKENAB(setup));
+
+	/* Force IntSrc to Disabled if disable_int_src is asserted. */
+	if (!disable_int_src)
+		cra |= S626_SET_CRA_INTSRC_A(S626_GET_STD_INTSRC(setup));
+
+	/* Populate all mode-dependent attributes of CRA & CRB images. */
+	clkpol = S626_GET_STD_CLKPOL(setup);
+	switch (S626_GET_STD_ENCMODE(setup)) {
+	case S626_ENCMODE_EXTENDER: /* Extender Mode: */
+		/* Force to Timer mode (Extender valid only for B counters). */
+		/* Fall through to case S626_ENCMODE_TIMER: */
+	case S626_ENCMODE_TIMER:	/* Timer Mode: */
+		/* CntSrcA<1> selects system clock */
+		cntsrc = S626_CNTSRC_SYSCLK;
+		/* Count direction (CntSrcA<0>) obtained from ClkPol. */
+		cntsrc |= clkpol;
+		/* ClkPolA behaves as always-on clock enable. */
+		clkpol = 1;
+		/* ClkMult must be 1x. */
+		clkmult = S626_CLKMULT_1X;
+		break;
+	default:		/* Counter Mode: */
+		/* Select ENC_C and ENC_D as clock/direction inputs. */
+		cntsrc = S626_CNTSRC_ENCODER;
+		/* Clock polarity is passed through. */
+		/* Force multiplier to x1 if not legal, else pass through. */
+		clkmult = S626_GET_STD_CLKMULT(setup);
+		if (clkmult == S626_CLKMULT_SPECIAL)
+			clkmult = S626_CLKMULT_1X;
+		break;
+	}
+	cra |= S626_SET_CRA_CNTSRC_A(cntsrc) | S626_SET_CRA_CLKPOL_A(clkpol) |
+	       S626_SET_CRA_CLKMULT_A(clkmult);
+
+	/*
+	 * Force positive index polarity if IndxSrc is software-driven only,
+	 * otherwise pass it through.
+	 */
+	if (S626_GET_STD_INDXSRC(setup) != S626_INDXSRC_SOFT)
+		cra |= S626_SET_CRA_INDXPOL_A(S626_GET_STD_INDXPOL(setup));
+
+	/*
+	 * If IntSrc has been forced to Disabled, update the MISC2 interrupt
+	 * enable mask to indicate the counter interrupt is disabled.
+	 */
+	if (disable_int_src)
+		devpriv->counter_int_enabs &= ~k->my_event_bits[3];
+
+	/*
+	 * While retaining CounterB and LatchSrc configurations, program the
+	 * new counter operating mode.
+	 */
+	s626_debi_replace(dev, k->my_cra,
+			  S626_CRAMSK_INDXSRC_B | S626_CRAMSK_CNTSRC_B, cra);
+	s626_debi_replace(dev, k->my_crb,
+			  ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_A), crb);
+}
+
+static void s626_set_mode_b(struct comedi_device *dev,
+			    const struct s626_enc_info *k, uint16_t setup,
+			    uint16_t disable_int_src)
+{
+	struct s626_private *devpriv = dev->private;
+	uint16_t cra;
+	uint16_t crb;
+	unsigned cntsrc, clkmult, clkpol;
+
+	/* Initialize CRA and CRB images. */
+	/* IndexSrc is passed through. */
+	cra = S626_SET_CRA_INDXSRC_B(S626_GET_STD_INDXSRC(setup));
+
+	/* Reset event captures and disable interrupts. */
+	crb = S626_SET_CRB_INTRESETCMD(1) | S626_SET_CRB_INTRESET_B(1);
+	/* Clock enable is passed through. */
+	crb |= S626_SET_CRB_CLKENAB_B(S626_GET_STD_CLKENAB(setup));
+	/* Preload trigger source is passed through. */
+	crb |= S626_SET_CRB_LOADSRC_B(S626_GET_STD_LOADSRC(setup));
+
+	/* Force IntSrc to Disabled if disable_int_src is asserted. */
+	if (!disable_int_src)
+		crb |= S626_SET_CRB_INTSRC_B(S626_GET_STD_INTSRC(setup));
+
+	/* Populate all mode-dependent attributes of CRA & CRB images. */
+	clkpol = S626_GET_STD_CLKPOL(setup);
+	switch (S626_GET_STD_ENCMODE(setup)) {
+	case S626_ENCMODE_TIMER:	/* Timer Mode: */
+		/* CntSrcB<1> selects system clock */
+		cntsrc = S626_CNTSRC_SYSCLK;
+		/* with direction (CntSrcB<0>) obtained from ClkPol. */
+		cntsrc |= clkpol;
+		/* ClkPolB behaves as always-on clock enable. */
+		clkpol = 1;
+		/* ClkMultB must be 1x. */
+		clkmult = S626_CLKMULT_1X;
+		break;
+	case S626_ENCMODE_EXTENDER:	/* Extender Mode: */
+		/* CntSrcB source is OverflowA (same as "timer") */
+		cntsrc = S626_CNTSRC_SYSCLK;
+		/* with direction obtained from ClkPol. */
+		cntsrc |= clkpol;
+		/* ClkPolB controls IndexB -- always set to active. */
+		clkpol = 1;
+		/* ClkMultB selects OverflowA as the clock source. */
+		clkmult = S626_CLKMULT_SPECIAL;
+		break;
+	default:		/* Counter Mode: */
+		/* Select ENC_C and ENC_D as clock/direction inputs. */
+		cntsrc = S626_CNTSRC_ENCODER;
+		/* ClkPol is passed through. */
+		/* Force ClkMult to x1 if not legal, otherwise pass through. */
+		clkmult = S626_GET_STD_CLKMULT(setup);
+		if (clkmult == S626_CLKMULT_SPECIAL)
+			clkmult = S626_CLKMULT_1X;
+		break;
+	}
+	cra |= S626_SET_CRA_CNTSRC_B(cntsrc);
+	crb |= S626_SET_CRB_CLKPOL_B(clkpol) | S626_SET_CRB_CLKMULT_B(clkmult);
+
+	/*
+	 * Force positive index polarity if IndxSrc is software-driven only,
+	 * otherwise pass it through.
+	 */
+	if (S626_GET_STD_INDXSRC(setup) != S626_INDXSRC_SOFT)
+		crb |= S626_SET_CRB_INDXPOL_B(S626_GET_STD_INDXPOL(setup));
+
+	/*
+	 * If IntSrc has been forced to Disabled, update the MISC2 interrupt
+	 * enable mask to indicate the counter interrupt is disabled.
+	 */
+	if (disable_int_src)
+		devpriv->counter_int_enabs &= ~k->my_event_bits[3];
+
+	/*
+	 * While retaining CounterA and LatchSrc configurations, program the
+	 * new counter operating mode.
+	 */
+	s626_debi_replace(dev, k->my_cra,
+			  ~(S626_CRAMSK_INDXSRC_B | S626_CRAMSK_CNTSRC_B), cra);
+	s626_debi_replace(dev, k->my_crb,
+			  S626_CRBMSK_CLKENAB_A | S626_CRBMSK_LATCHSRC, crb);
+}
+
+/*
+ * Return/set a counter's enable.  enab: 0=always enabled, 1=enabled by index.
+ */
+static void s626_set_enable_a(struct comedi_device *dev,
+			      const struct s626_enc_info *k, uint16_t enab)
+{
+	s626_debi_replace(dev, k->my_crb,
+			  ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_A),
+			  S626_SET_CRB_CLKENAB_A(enab));
+}
+
+static void s626_set_enable_b(struct comedi_device *dev,
+			      const struct s626_enc_info *k, uint16_t enab)
+{
+	s626_debi_replace(dev, k->my_crb,
+			  ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_B),
+			  S626_SET_CRB_CLKENAB_B(enab));
+}
+
+static uint16_t s626_get_enable_a(struct comedi_device *dev,
+				  const struct s626_enc_info *k)
+{
+	return S626_GET_CRB_CLKENAB_A(s626_debi_read(dev, k->my_crb));
+}
+
+static uint16_t s626_get_enable_b(struct comedi_device *dev,
+				  const struct s626_enc_info *k)
+{
+	return S626_GET_CRB_CLKENAB_B(s626_debi_read(dev, k->my_crb));
+}
+
+#ifdef unused
+static uint16_t s626_get_latch_source(struct comedi_device *dev,
+				      const struct s626_enc_info *k)
+{
+	return S626_GET_CRB_LATCHSRC(s626_debi_read(dev, k->my_crb));
+}
+#endif
+
+/*
+ * Return/set the event that will trigger transfer of the preload
+ * register into the counter.  0=ThisCntr_Index, 1=ThisCntr_Overflow,
+ * 2=OverflowA (B counters only), 3=disabled.
+ */
+static void s626_set_load_trig_a(struct comedi_device *dev,
+				 const struct s626_enc_info *k, uint16_t trig)
+{
+	s626_debi_replace(dev, k->my_cra, ~S626_CRAMSK_LOADSRC_A,
+			  S626_SET_CRA_LOADSRC_A(trig));
+}
+
+static void s626_set_load_trig_b(struct comedi_device *dev,
+				 const struct s626_enc_info *k, uint16_t trig)
+{
+	s626_debi_replace(dev, k->my_crb,
+			  ~(S626_CRBMSK_LOADSRC_B | S626_CRBMSK_INTCTRL),
+			  S626_SET_CRB_LOADSRC_B(trig));
+}
+
+static uint16_t s626_get_load_trig_a(struct comedi_device *dev,
+				     const struct s626_enc_info *k)
+{
+	return S626_GET_CRA_LOADSRC_A(s626_debi_read(dev, k->my_cra));
+}
+
+static uint16_t s626_get_load_trig_b(struct comedi_device *dev,
+				     const struct s626_enc_info *k)
+{
+	return S626_GET_CRB_LOADSRC_B(s626_debi_read(dev, k->my_crb));
+}
+
+/*
+ * Return/set counter interrupt source and clear any captured
+ * index/overflow events.  int_source: 0=Disabled, 1=OverflowOnly,
+ * 2=IndexOnly, 3=IndexAndOverflow.
+ */
+static void s626_set_int_src_a(struct comedi_device *dev,
+			       const struct s626_enc_info *k,
+			       uint16_t int_source)
+{
+	struct s626_private *devpriv = dev->private;
+
+	/* Reset any pending counter overflow or index captures. */
+	s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
+			  (S626_SET_CRB_INTRESETCMD(1) |
+			   S626_SET_CRB_INTRESET_A(1)));
+
+	/* Program counter interrupt source. */
+	s626_debi_replace(dev, k->my_cra, ~S626_CRAMSK_INTSRC_A,
+			  S626_SET_CRA_INTSRC_A(int_source));
+
+	/* Update MISC2 interrupt enable mask. */
+	devpriv->counter_int_enabs =
+	    (devpriv->counter_int_enabs & ~k->my_event_bits[3]) |
+	    k->my_event_bits[int_source];
+}
+
+static void s626_set_int_src_b(struct comedi_device *dev,
+			       const struct s626_enc_info *k,
+			       uint16_t int_source)
+{
+	struct s626_private *devpriv = dev->private;
+	uint16_t crb;
+
+	/* Cache writeable CRB register image. */
+	crb = s626_debi_read(dev, k->my_crb) & ~S626_CRBMSK_INTCTRL;
+
+	/* Reset any pending counter overflow or index captures. */
+	s626_debi_write(dev, k->my_crb, (crb | S626_SET_CRB_INTRESETCMD(1) |
+					 S626_SET_CRB_INTRESET_B(1)));
+
+	/* Program counter interrupt source. */
+	s626_debi_write(dev, k->my_crb, ((crb & ~S626_CRBMSK_INTSRC_B) |
+					 S626_SET_CRB_INTSRC_B(int_source)));
+
+	/* Update MISC2 interrupt enable mask. */
+	devpriv->counter_int_enabs =
+		(devpriv->counter_int_enabs & ~k->my_event_bits[3]) |
+		k->my_event_bits[int_source];
+}
+
+static uint16_t s626_get_int_src_a(struct comedi_device *dev,
+				   const struct s626_enc_info *k)
+{
+	return S626_GET_CRA_INTSRC_A(s626_debi_read(dev, k->my_cra));
+}
+
+static uint16_t s626_get_int_src_b(struct comedi_device *dev,
+				   const struct s626_enc_info *k)
+{
+	return S626_GET_CRB_INTSRC_B(s626_debi_read(dev, k->my_crb));
+}
+
+#ifdef unused
+/*
+ * Return/set the clock multiplier.
+ */
+static void s626_set_clk_mult(struct comedi_device *dev,
+			      const struct s626_enc_info *k, uint16_t value)
+{
+	k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_CLKMULT) |
+			     S626_SET_STD_CLKMULT(value)), false);
+}
+
+static uint16_t s626_get_clk_mult(struct comedi_device *dev,
+				  const struct s626_enc_info *k)
+{
+	return S626_GET_STD_CLKMULT(k->get_mode(dev, k));
+}
+
+/*
+ * Return/set the clock polarity.
+ */
+static void s626_set_clk_pol(struct comedi_device *dev,
+			     const struct s626_enc_info *k, uint16_t value)
+{
+	k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_CLKPOL) |
+			     S626_SET_STD_CLKPOL(value)), false);
+}
+
+static uint16_t s626_get_clk_pol(struct comedi_device *dev,
+				 const struct s626_enc_info *k)
+{
+	return S626_GET_STD_CLKPOL(k->get_mode(dev, k));
+}
+
+/*
+ * Return/set the encoder mode.
+ */
+static void s626_set_enc_mode(struct comedi_device *dev,
+			      const struct s626_enc_info *k, uint16_t value)
+{
+	k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_ENCMODE) |
+			     S626_SET_STD_ENCMODE(value)), false);
+}
+
+static uint16_t s626_get_enc_mode(struct comedi_device *dev,
+				  const struct s626_enc_info *k)
+{
+	return S626_GET_STD_ENCMODE(k->get_mode(dev, k));
+}
+
+/*
+ * Return/set the index polarity.
+ */
+static void s626_set_index_pol(struct comedi_device *dev,
+			       const struct s626_enc_info *k, uint16_t value)
+{
+	k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_INDXPOL) |
+			     S626_SET_STD_INDXPOL(value != 0)), false);
+}
+
+static uint16_t s626_get_index_pol(struct comedi_device *dev,
+				   const struct s626_enc_info *k)
+{
+	return S626_GET_STD_INDXPOL(k->get_mode(dev, k));
+}
+
+/*
+ * Return/set the index source.
+ */
+static void s626_set_index_src(struct comedi_device *dev,
+			       const struct s626_enc_info *k, uint16_t value)
+{
+	k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_INDXSRC) |
+			     S626_SET_STD_INDXSRC(value != 0)), false);
+}
+
+static uint16_t s626_get_index_src(struct comedi_device *dev,
+				   const struct s626_enc_info *k)
+{
+	return S626_GET_STD_INDXSRC(k->get_mode(dev, k));
+}
+#endif
+
+/*
+ * Generate an index pulse.
+ */
+static void s626_pulse_index_a(struct comedi_device *dev,
+			       const struct s626_enc_info *k)
+{
+	uint16_t cra;
+
+	cra = s626_debi_read(dev, k->my_cra);
+	/* Pulse index. */
+	s626_debi_write(dev, k->my_cra, (cra ^ S626_CRAMSK_INDXPOL_A));
+	s626_debi_write(dev, k->my_cra, cra);
+}
+
+static void s626_pulse_index_b(struct comedi_device *dev,
+			       const struct s626_enc_info *k)
+{
+	uint16_t crb;
+
+	crb = s626_debi_read(dev, k->my_crb) & ~S626_CRBMSK_INTCTRL;
+	/* Pulse index. */
+	s626_debi_write(dev, k->my_crb, (crb ^ S626_CRBMSK_INDXPOL_B));
+	s626_debi_write(dev, k->my_crb, crb);
+}
+
+static const struct s626_enc_info s626_enc_chan_info[] = {
+	{
+		.get_enable		= s626_get_enable_a,
+		.get_int_src		= s626_get_int_src_a,
+		.get_load_trig		= s626_get_load_trig_a,
+		.get_mode		= s626_get_mode_a,
+		.pulse_index		= s626_pulse_index_a,
+		.set_enable		= s626_set_enable_a,
+		.set_int_src		= s626_set_int_src_a,
+		.set_load_trig		= s626_set_load_trig_a,
+		.set_mode		= s626_set_mode_a,
+		.reset_cap_flags	= s626_reset_cap_flags_a,
+		.my_cra			= S626_LP_CR0A,
+		.my_crb			= S626_LP_CR0B,
+		.my_latch_lsw		= S626_LP_CNTR0ALSW,
+		.my_event_bits		= S626_EVBITS(0),
+	}, {
+		.get_enable		= s626_get_enable_a,
+		.get_int_src		= s626_get_int_src_a,
+		.get_load_trig		= s626_get_load_trig_a,
+		.get_mode		= s626_get_mode_a,
+		.pulse_index		= s626_pulse_index_a,
+		.set_enable		= s626_set_enable_a,
+		.set_int_src		= s626_set_int_src_a,
+		.set_load_trig		= s626_set_load_trig_a,
+		.set_mode		= s626_set_mode_a,
+		.reset_cap_flags	= s626_reset_cap_flags_a,
+		.my_cra			= S626_LP_CR1A,
+		.my_crb			= S626_LP_CR1B,
+		.my_latch_lsw		= S626_LP_CNTR1ALSW,
+		.my_event_bits		= S626_EVBITS(1),
+	}, {
+		.get_enable		= s626_get_enable_a,
+		.get_int_src		= s626_get_int_src_a,
+		.get_load_trig		= s626_get_load_trig_a,
+		.get_mode		= s626_get_mode_a,
+		.pulse_index		= s626_pulse_index_a,
+		.set_enable		= s626_set_enable_a,
+		.set_int_src		= s626_set_int_src_a,
+		.set_load_trig		= s626_set_load_trig_a,
+		.set_mode		= s626_set_mode_a,
+		.reset_cap_flags	= s626_reset_cap_flags_a,
+		.my_cra			= S626_LP_CR2A,
+		.my_crb			= S626_LP_CR2B,
+		.my_latch_lsw		= S626_LP_CNTR2ALSW,
+		.my_event_bits		= S626_EVBITS(2),
+	}, {
+		.get_enable		= s626_get_enable_b,
+		.get_int_src		= s626_get_int_src_b,
+		.get_load_trig		= s626_get_load_trig_b,
+		.get_mode		= s626_get_mode_b,
+		.pulse_index		= s626_pulse_index_b,
+		.set_enable		= s626_set_enable_b,
+		.set_int_src		= s626_set_int_src_b,
+		.set_load_trig		= s626_set_load_trig_b,
+		.set_mode		= s626_set_mode_b,
+		.reset_cap_flags	= s626_reset_cap_flags_b,
+		.my_cra			= S626_LP_CR0A,
+		.my_crb			= S626_LP_CR0B,
+		.my_latch_lsw		= S626_LP_CNTR0BLSW,
+		.my_event_bits		= S626_EVBITS(3),
+	}, {
+		.get_enable		= s626_get_enable_b,
+		.get_int_src		= s626_get_int_src_b,
+		.get_load_trig		= s626_get_load_trig_b,
+		.get_mode		= s626_get_mode_b,
+		.pulse_index		= s626_pulse_index_b,
+		.set_enable		= s626_set_enable_b,
+		.set_int_src		= s626_set_int_src_b,
+		.set_load_trig		= s626_set_load_trig_b,
+		.set_mode		= s626_set_mode_b,
+		.reset_cap_flags	= s626_reset_cap_flags_b,
+		.my_cra			= S626_LP_CR1A,
+		.my_crb			= S626_LP_CR1B,
+		.my_latch_lsw		= S626_LP_CNTR1BLSW,
+		.my_event_bits		= S626_EVBITS(4),
+	}, {
+		.get_enable		= s626_get_enable_b,
+		.get_int_src		= s626_get_int_src_b,
+		.get_load_trig		= s626_get_load_trig_b,
+		.get_mode		= s626_get_mode_b,
+		.pulse_index		= s626_pulse_index_b,
+		.set_enable		= s626_set_enable_b,
+		.set_int_src		= s626_set_int_src_b,
+		.set_load_trig		= s626_set_load_trig_b,
+		.set_mode		= s626_set_mode_b,
+		.reset_cap_flags	= s626_reset_cap_flags_b,
+		.my_cra			= S626_LP_CR2A,
+		.my_crb			= S626_LP_CR2B,
+		.my_latch_lsw		= S626_LP_CNTR2BLSW,
+		.my_event_bits		= S626_EVBITS(5),
+	},
+};
+
+static unsigned int s626_ai_reg_to_uint(unsigned int data)
+{
+	return ((data >> 18) & 0x3fff) ^ 0x2000;
+}
 
 static int s626_dio_set_irq(struct comedi_device *dev, unsigned int chan)
 {
@@ -629,19 +1322,19 @@
 	unsigned int status;
 
 	/* set channel to capture positive edge */
-	status = DEBIread(dev, LP_RDEDGSEL(group));
-	DEBIwrite(dev, LP_WREDGSEL(group), mask | status);
+	status = s626_debi_read(dev, S626_LP_RDEDGSEL(group));
+	s626_debi_write(dev, S626_LP_WREDGSEL(group), mask | status);
 
 	/* enable interrupt on selected channel */
-	status = DEBIread(dev, LP_RDINTSEL(group));
-	DEBIwrite(dev, LP_WRINTSEL(group), mask | status);
+	status = s626_debi_read(dev, S626_LP_RDINTSEL(group));
+	s626_debi_write(dev, S626_LP_WRINTSEL(group), mask | status);
 
 	/* enable edge capture write command */
-	DEBIwrite(dev, LP_MISC1, MISC1_EDCAP);
+	s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_EDCAP);
 
 	/* enable edge capture on selected channel */
-	status = DEBIread(dev, LP_RDCAPSEL(group));
-	DEBIwrite(dev, LP_WRCAPSEL(group), mask | status);
+	status = s626_debi_read(dev, S626_LP_RDCAPSEL(group));
+	s626_debi_write(dev, S626_LP_WRCAPSEL(group), mask | status);
 
 	return 0;
 }
@@ -650,10 +1343,10 @@
 			      unsigned int mask)
 {
 	/* disable edge capture write command */
-	DEBIwrite(dev, LP_MISC1, MISC1_NOEDCAP);
+	s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_NOEDCAP);
 
 	/* enable edge capture on selected channel */
-	DEBIwrite(dev, LP_WRCAPSEL(group), mask);
+	s626_debi_write(dev, S626_LP_WRCAPSEL(group), mask);
 
 	return 0;
 }
@@ -663,17 +1356,17 @@
 	unsigned int group;
 
 	/* disable edge capture write command */
-	DEBIwrite(dev, LP_MISC1, MISC1_NOEDCAP);
+	s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_NOEDCAP);
 
 	/* clear all dio pending events and interrupt */
 	for (group = 0; group < S626_DIO_BANKS; group++)
-		DEBIwrite(dev, LP_WRCAPSEL(group), 0xffff);
+		s626_debi_write(dev, S626_LP_WRCAPSEL(group), 0xffff);
 
 	return 0;
 }
 
-static void handle_dio_interrupt(struct comedi_device *dev,
-				 uint16_t irqbit, uint8_t group)
+static void s626_handle_dio_interrupt(struct comedi_device *dev,
+				      uint16_t irqbit, uint8_t group)
 {
 	struct s626_private *devpriv = dev->private;
 	struct comedi_subdevice *s = dev->read_subdev;
@@ -686,7 +1379,7 @@
 		if ((irqbit >> (cmd->start_arg - (16 * group))) == 1 &&
 		    cmd->start_src == TRIG_EXT) {
 			/* Start executing the RPS program */
-			s626_mc_enable(dev, MC1_ERPS1, P_MC1);
+			s626_mc_enable(dev, S626_MC1_ERPS1, S626_P_MC1);
 
 			if (cmd->scan_begin_src == TRIG_EXT)
 				s626_dio_set_irq(dev, cmd->scan_begin_arg);
@@ -694,7 +1387,7 @@
 		if ((irqbit >> (cmd->scan_begin_arg - (16 * group))) == 1 &&
 		    cmd->scan_begin_src == TRIG_EXT) {
 			/* Trigger ADC scan loop start */
-			s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
+			s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);
 
 			if (cmd->convert_src == TRIG_EXT) {
 				devpriv->ai_convert_count = cmd->chanlist_len;
@@ -703,16 +1396,17 @@
 			}
 
 			if (cmd->convert_src == TRIG_TIMER) {
-				struct enc_private *k = &encpriv[5];
+				const struct s626_enc_info *k =
+					&s626_enc_chan_info[5];
 
 				devpriv->ai_convert_count = cmd->chanlist_len;
-				k->SetEnable(dev, k, CLKENAB_ALWAYS);
+				k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
 			}
 		}
 		if ((irqbit >> (cmd->convert_arg - (16 * group))) == 1 &&
 		    cmd->convert_src == TRIG_EXT) {
 			/* Trigger ADC scan loop start */
-			s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
+			s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);
 
 			devpriv->ai_convert_count--;
 			if (devpriv->ai_convert_count > 0)
@@ -721,7 +1415,7 @@
 	}
 }
 
-static void check_dio_interrupts(struct comedi_device *dev)
+static void s626_check_dio_interrupts(struct comedi_device *dev)
 {
 	uint16_t irqbit;
 	uint8_t group;
@@ -729,90 +1423,91 @@
 	for (group = 0; group < S626_DIO_BANKS; group++) {
 		irqbit = 0;
 		/* read interrupt type */
-		irqbit = DEBIread(dev, LP_RDCAPFLG(group));
+		irqbit = s626_debi_read(dev, S626_LP_RDCAPFLG(group));
 
 		/* check if interrupt is generated from dio channels */
 		if (irqbit) {
-			handle_dio_interrupt(dev, irqbit, group);
+			s626_handle_dio_interrupt(dev, irqbit, group);
 			return;
 		}
 	}
 }
 
-static void check_counter_interrupts(struct comedi_device *dev)
+static void s626_check_counter_interrupts(struct comedi_device *dev)
 {
 	struct s626_private *devpriv = dev->private;
 	struct comedi_subdevice *s = dev->read_subdev;
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
-	struct enc_private *k;
+	const struct s626_enc_info *k;
 	uint16_t irqbit;
 
 	/* read interrupt type */
-	irqbit = DEBIread(dev, LP_RDMISC2);
+	irqbit = s626_debi_read(dev, S626_LP_RDMISC2);
 
 	/* check interrupt on counters */
-	if (irqbit & IRQ_COINT1A) {
-		k = &encpriv[0];
+	if (irqbit & S626_IRQ_COINT1A) {
+		k = &s626_enc_chan_info[0];
 
 		/* clear interrupt capture flag */
-		k->ResetCapFlags(dev, k);
+		k->reset_cap_flags(dev, k);
 	}
-	if (irqbit & IRQ_COINT2A) {
-		k = &encpriv[1];
+	if (irqbit & S626_IRQ_COINT2A) {
+		k = &s626_enc_chan_info[1];
 
 		/* clear interrupt capture flag */
-		k->ResetCapFlags(dev, k);
+		k->reset_cap_flags(dev, k);
 	}
-	if (irqbit & IRQ_COINT3A) {
-		k = &encpriv[2];
+	if (irqbit & S626_IRQ_COINT3A) {
+		k = &s626_enc_chan_info[2];
 
 		/* clear interrupt capture flag */
-		k->ResetCapFlags(dev, k);
+		k->reset_cap_flags(dev, k);
 	}
-	if (irqbit & IRQ_COINT1B) {
-		k = &encpriv[3];
+	if (irqbit & S626_IRQ_COINT1B) {
+		k = &s626_enc_chan_info[3];
 
 		/* clear interrupt capture flag */
-		k->ResetCapFlags(dev, k);
+		k->reset_cap_flags(dev, k);
 	}
-	if (irqbit & IRQ_COINT2B) {
-		k = &encpriv[4];
+	if (irqbit & S626_IRQ_COINT2B) {
+		k = &s626_enc_chan_info[4];
 
 		/* clear interrupt capture flag */
-		k->ResetCapFlags(dev, k);
+		k->reset_cap_flags(dev, k);
 
 		if (devpriv->ai_convert_count > 0) {
 			devpriv->ai_convert_count--;
 			if (devpriv->ai_convert_count == 0)
-				k->SetEnable(dev, k, CLKENAB_INDEX);
+				k->set_enable(dev, k, S626_CLKENAB_INDEX);
 
 			if (cmd->convert_src == TRIG_TIMER) {
 				/* Trigger ADC scan loop start */
-				s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
+				s626_mc_enable(dev, S626_MC2_ADC_RPS,
+					       S626_P_MC2);
 			}
 		}
 	}
-	if (irqbit & IRQ_COINT3B) {
-		k = &encpriv[5];
+	if (irqbit & S626_IRQ_COINT3B) {
+		k = &s626_enc_chan_info[5];
 
 		/* clear interrupt capture flag */
-		k->ResetCapFlags(dev, k);
+		k->reset_cap_flags(dev, k);
 
 		if (cmd->scan_begin_src == TRIG_TIMER) {
 			/* Trigger ADC scan loop start */
-			s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
+			s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);
 		}
 
 		if (cmd->convert_src == TRIG_TIMER) {
-			k = &encpriv[4];
+			k = &s626_enc_chan_info[4];
 			devpriv->ai_convert_count = cmd->chanlist_len;
-			k->SetEnable(dev, k, CLKENAB_ALWAYS);
+			k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
 		}
 	}
 }
 
-static bool handle_eos_interrupt(struct comedi_device *dev)
+static bool s626_handle_eos_interrupt(struct comedi_device *dev)
 {
 	struct s626_private *devpriv = dev->private;
 	struct comedi_subdevice *s = dev->read_subdev;
@@ -823,19 +1518,19 @@
 	 * first uint16_t in the buffer because it contains junk data
 	 * from the final ADC of the previous poll list scan.
 	 */
-	int32_t *readaddr = (int32_t *)devpriv->ANABuf.LogicalBase + 1;
+	uint32_t *readaddr = (uint32_t *)devpriv->ana_buf.logical_base + 1;
 	bool finished = false;
 	int i;
 
 	/* get the data and hand it over to comedi */
 	for (i = 0; i < cmd->chanlist_len; i++) {
-		short tempdata;
+		unsigned short tempdata;
 
 		/*
 		 * Convert ADC data to 16-bit integer values and copy
 		 * to application buffer.
 		 */
-		tempdata = s626_ai_reg_to_uint((int)*readaddr);
+		tempdata = s626_ai_reg_to_uint(*readaddr);
 		readaddr++;
 
 		/* put data into read buffer */
@@ -846,13 +1541,13 @@
 	/* end of scan occurs */
 	async->events |= COMEDI_CB_EOS;
 
-	if (!devpriv->ai_continous)
+	if (!devpriv->ai_continuous)
 		devpriv->ai_sample_count--;
 	if (devpriv->ai_sample_count <= 0) {
 		devpriv->ai_cmd_running = 0;
 
 		/* Stop RPS program */
-		s626_mc_disable(dev, MC1_ERPS1, P_MC1);
+		s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1);
 
 		/* send end of acquisition */
 		async->events |= COMEDI_CB_EOA;
@@ -879,229 +1574,238 @@
 
 	if (!dev->attached)
 		return IRQ_NONE;
-	/*  lock to avoid race with comedi_poll */
+	/* lock to avoid race with comedi_poll */
 	spin_lock_irqsave(&dev->spinlock, flags);
 
 	/* save interrupt enable register state */
-	irqstatus = readl(devpriv->mmio + P_IER);
+	irqstatus = readl(devpriv->mmio + S626_P_IER);
 
 	/* read interrupt type */
-	irqtype = readl(devpriv->mmio + P_ISR);
+	irqtype = readl(devpriv->mmio + S626_P_ISR);
 
 	/* disable master interrupt */
-	writel(0, devpriv->mmio + P_IER);
+	writel(0, devpriv->mmio + S626_P_IER);
 
 	/* clear interrupt */
-	writel(irqtype, devpriv->mmio + P_ISR);
+	writel(irqtype, devpriv->mmio + S626_P_ISR);
 
 	switch (irqtype) {
-	case IRQ_RPS1:		/*  end_of_scan occurs */
-		if (handle_eos_interrupt(dev))
+	case S626_IRQ_RPS1:	/* end_of_scan occurs */
+		if (s626_handle_eos_interrupt(dev))
 			irqstatus = 0;
 		break;
-	case IRQ_GPIO3:	/* check dio and conter interrupt */
+	case S626_IRQ_GPIO3:	/* check dio and counter interrupt */
 		/* s626_dio_clear_irq(dev); */
-		check_dio_interrupts(dev);
-		check_counter_interrupts(dev);
+		s626_check_dio_interrupts(dev);
+		s626_check_counter_interrupts(dev);
 		break;
 	}
 
 	/* enable interrupt */
-	writel(irqstatus, devpriv->mmio + P_IER);
+	writel(irqstatus, devpriv->mmio + S626_P_IER);
 
 	spin_unlock_irqrestore(&dev->spinlock, flags);
 	return IRQ_HANDLED;
 }
 
 /*
- * this functions build the RPS program for hardware driven acquistion
+ * This function builds the RPS program for hardware driven acquisition.
  */
-static void ResetADC(struct comedi_device *dev, uint8_t *ppl)
+static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
 {
 	struct s626_private *devpriv = dev->private;
-	register uint32_t *pRPS;
-	uint32_t JmpAdrs;
+	uint32_t *rps;
+	uint32_t jmp_adrs;
 	uint16_t i;
 	uint16_t n;
-	uint32_t LocalPPL;
-	struct comedi_cmd *cmd = &(dev->subdevices->async->cmd);
+	uint32_t local_ppl;
+	struct comedi_cmd *cmd = &dev->subdevices->async->cmd;
 
 	/* Stop RPS program in case it is currently running */
-	s626_mc_disable(dev, MC1_ERPS1, P_MC1);
+	s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1);
 
-	/*  Set starting logical address to write RPS commands. */
-	pRPS = (uint32_t *) devpriv->RPSBuf.LogicalBase;
+	/* Set starting logical address to write RPS commands. */
+	rps = (uint32_t *)devpriv->rps_buf.logical_base;
 
 	/* Initialize RPS instruction pointer */
-	writel((uint32_t)devpriv->RPSBuf.PhysicalBase,
-	       devpriv->mmio + P_RPSADDR1);
+	writel((uint32_t)devpriv->rps_buf.physical_base,
+	       devpriv->mmio + S626_P_RPSADDR1);
 
-	/*  Construct RPS program in RPSBuf DMA buffer */
-
+	/* Construct RPS program in rps_buf DMA buffer */
 	if (cmd != NULL && cmd->scan_begin_src != TRIG_FOLLOW) {
-		/*  Wait for Start trigger. */
-		*pRPS++ = RPS_PAUSE | RPS_SIGADC;
-		*pRPS++ = RPS_CLRSIGNAL | RPS_SIGADC;
+		/* Wait for Start trigger. */
+		*rps++ = S626_RPS_PAUSE | S626_RPS_SIGADC;
+		*rps++ = S626_RPS_CLRSIGNAL | S626_RPS_SIGADC;
 	}
 
-	/* SAA7146 BUG WORKAROUND Do a dummy DEBI Write.  This is necessary
+	/*
+	 * SAA7146 BUG WORKAROUND Do a dummy DEBI Write.  This is necessary
 	 * because the first RPS DEBI Write following a non-RPS DEBI write
 	 * seems to always fail.  If we don't do this dummy write, the ADC
 	 * gain might not be set to the value required for the first slot in
 	 * the poll list; the ADC gain would instead remain unchanged from
 	 * the previously programmed value.
 	 */
-	*pRPS++ = RPS_LDREG | (P_DEBICMD >> 2);
 	/* Write DEBI Write command and address to shadow RAM. */
+	*rps++ = S626_RPS_LDREG | (S626_P_DEBICMD >> 2);
+	*rps++ = S626_DEBI_CMD_WRWORD | S626_LP_GSEL;
+	*rps++ = S626_RPS_LDREG | (S626_P_DEBIAD >> 2);
+	/* Write DEBI immediate data  to shadow RAM: */
+	*rps++ = S626_GSEL_BIPOLAR5V;	/* arbitrary immediate data  value. */
+	*rps++ = S626_RPS_CLRSIGNAL | S626_RPS_DEBI;
+	/* Reset "shadow RAM  uploaded" flag. */
+	/* Invoke shadow RAM upload. */
+	*rps++ = S626_RPS_UPLOAD | S626_RPS_DEBI;
+	/* Wait for shadow upload to finish. */
+	*rps++ = S626_RPS_PAUSE | S626_RPS_DEBI;
 
-	*pRPS++ = DEBI_CMD_WRWORD | LP_GSEL;
-	*pRPS++ = RPS_LDREG | (P_DEBIAD >> 2);
-	/*  Write DEBI immediate data  to shadow RAM: */
-
-	*pRPS++ = GSEL_BIPOLAR5V;
-	/*  arbitrary immediate data  value. */
-
-	*pRPS++ = RPS_CLRSIGNAL | RPS_DEBI;
-	/*  Reset "shadow RAM  uploaded" flag. */
-	*pRPS++ = RPS_UPLOAD | RPS_DEBI;	/*  Invoke shadow RAM upload. */
-	*pRPS++ = RPS_PAUSE | RPS_DEBI;	/*  Wait for shadow upload to finish. */
-
-	/* Digitize all slots in the poll list. This is implemented as a
+	/*
+	 * Digitize all slots in the poll list. This is implemented as a
 	 * for loop to limit the slot count to 16 in case the application
-	 * forgot to set the EOPL flag in the final slot.
+	 * forgot to set the S626_EOPL flag in the final slot.
 	 */
-	for (devpriv->AdcItems = 0; devpriv->AdcItems < 16; devpriv->AdcItems++) {
-		/* Convert application's poll list item to private board class
+	for (devpriv->adc_items = 0; devpriv->adc_items < 16;
+	     devpriv->adc_items++) {
+		/*
+		 * Convert application's poll list item to private board class
 		 * format.  Each app poll list item is an uint8_t with form
 		 * (EOPL,x,x,RANGE,CHAN<3:0>), where RANGE code indicates 0 =
 		 * +-10V, 1 = +-5V, and EOPL = End of Poll List marker.
 		 */
-		LocalPPL =
-		    (*ppl << 8) | (*ppl & 0x10 ? GSEL_BIPOLAR5V :
-				   GSEL_BIPOLAR10V);
+		local_ppl = (*ppl << 8) | (*ppl & 0x10 ? S626_GSEL_BIPOLAR5V :
+					   S626_GSEL_BIPOLAR10V);
 
-		/*  Switch ADC analog gain. */
-		*pRPS++ = RPS_LDREG | (P_DEBICMD >> 2);	/*  Write DEBI command */
-		/*  and address to */
-		/*  shadow RAM. */
-		*pRPS++ = DEBI_CMD_WRWORD | LP_GSEL;
-		*pRPS++ = RPS_LDREG | (P_DEBIAD >> 2);	/*  Write DEBI */
-		/*  immediate data to */
-		/*  shadow RAM. */
-		*pRPS++ = LocalPPL;
-		*pRPS++ = RPS_CLRSIGNAL | RPS_DEBI;	/*  Reset "shadow RAM uploaded" */
-		/*  flag. */
-		*pRPS++ = RPS_UPLOAD | RPS_DEBI;	/*  Invoke shadow RAM upload. */
-		*pRPS++ = RPS_PAUSE | RPS_DEBI;	/*  Wait for shadow upload to */
-		/*  finish. */
+		/* Switch ADC analog gain. */
+		/* Write DEBI command and address to shadow RAM. */
+		*rps++ = S626_RPS_LDREG | (S626_P_DEBICMD >> 2);
+		*rps++ = S626_DEBI_CMD_WRWORD | S626_LP_GSEL;
+		/* Write DEBI immediate data to shadow RAM. */
+		*rps++ = S626_RPS_LDREG | (S626_P_DEBIAD >> 2);
+		*rps++ = local_ppl;
+		/* Reset "shadow RAM uploaded" flag. */
+		*rps++ = S626_RPS_CLRSIGNAL | S626_RPS_DEBI;
+		/* Invoke shadow RAM upload. */
+		*rps++ = S626_RPS_UPLOAD | S626_RPS_DEBI;
+		/* Wait for shadow upload to finish. */
+		*rps++ = S626_RPS_PAUSE | S626_RPS_DEBI;
+		/* Select ADC analog input channel. */
+		*rps++ = S626_RPS_LDREG | (S626_P_DEBICMD >> 2);
+		/* Write DEBI command and address to shadow RAM. */
+		*rps++ = S626_DEBI_CMD_WRWORD | S626_LP_ISEL;
+		*rps++ = S626_RPS_LDREG | (S626_P_DEBIAD >> 2);
+		/* Write DEBI immediate data to shadow RAM. */
+		*rps++ = local_ppl;
+		/* Reset "shadow RAM uploaded" flag. */
+		*rps++ = S626_RPS_CLRSIGNAL | S626_RPS_DEBI;
+		/* Invoke shadow RAM upload. */
+		*rps++ = S626_RPS_UPLOAD | S626_RPS_DEBI;
+		/* Wait for shadow upload to finish. */
+		*rps++ = S626_RPS_PAUSE | S626_RPS_DEBI;
 
-		/*  Select ADC analog input channel. */
-		*pRPS++ = RPS_LDREG | (P_DEBICMD >> 2);
-		/*  Write DEBI command and address to  shadow RAM. */
-		*pRPS++ = DEBI_CMD_WRWORD | LP_ISEL;
-		*pRPS++ = RPS_LDREG | (P_DEBIAD >> 2);
-		/*  Write DEBI immediate data to shadow RAM. */
-		*pRPS++ = LocalPPL;
-		*pRPS++ = RPS_CLRSIGNAL | RPS_DEBI;
-		/*  Reset "shadow RAM uploaded"  flag. */
-
-		*pRPS++ = RPS_UPLOAD | RPS_DEBI;
-		/*  Invoke shadow RAM upload. */
-
-		*pRPS++ = RPS_PAUSE | RPS_DEBI;
-		/*  Wait for shadow upload to finish. */
-
-		/* Delay at least 10 microseconds for analog input settling.
-		 * Instead of padding with NOPs, we use RPS_JUMP instructions
-		 * here; this allows us to produce a longer delay than is
-		 * possible with NOPs because each RPS_JUMP flushes the RPS'
-		 * instruction prefetch pipeline.
+		/*
+		 * Delay at least 10 microseconds for analog input settling.
+		 * Instead of padding with NOPs, we use S626_RPS_JUMP
+		 * instructions here; this allows us to produce a longer delay
+		 * than is possible with NOPs because each S626_RPS_JUMP
+		 * flushes the RPS' instruction prefetch pipeline.
 		 */
-		JmpAdrs =
-		    (uint32_t) devpriv->RPSBuf.PhysicalBase +
-		    (uint32_t) ((unsigned long)pRPS -
-				(unsigned long)devpriv->RPSBuf.LogicalBase);
-		for (i = 0; i < (10 * RPSCLK_PER_US / 2); i++) {
-			JmpAdrs += 8;	/*  Repeat to implement time delay: */
-			*pRPS++ = RPS_JUMP;	/*  Jump to next RPS instruction. */
-			*pRPS++ = JmpAdrs;
+		jmp_adrs =
+			(uint32_t)devpriv->rps_buf.physical_base +
+			(uint32_t)((unsigned long)rps -
+				   (unsigned long)devpriv->
+						  rps_buf.logical_base);
+		for (i = 0; i < (10 * S626_RPSCLK_PER_US / 2); i++) {
+			jmp_adrs += 8;	/* Repeat to implement time delay: */
+			/* Jump to next RPS instruction. */
+			*rps++ = S626_RPS_JUMP;
+			*rps++ = jmp_adrs;
 		}
 
 		if (cmd != NULL && cmd->convert_src != TRIG_NOW) {
-			/*  Wait for Start trigger. */
-			*pRPS++ = RPS_PAUSE | RPS_SIGADC;
-			*pRPS++ = RPS_CLRSIGNAL | RPS_SIGADC;
+			/* Wait for Start trigger. */
+			*rps++ = S626_RPS_PAUSE | S626_RPS_SIGADC;
+			*rps++ = S626_RPS_CLRSIGNAL | S626_RPS_SIGADC;
 		}
-		/*  Start ADC by pulsing GPIO1. */
-		*pRPS++ = RPS_LDREG | (P_GPIO >> 2);	/*  Begin ADC Start pulse. */
-		*pRPS++ = GPIO_BASE | GPIO1_LO;
-		*pRPS++ = RPS_NOP;
-		/*  VERSION 2.03 CHANGE: STRETCH OUT ADC START PULSE. */
-		*pRPS++ = RPS_LDREG | (P_GPIO >> 2);	/*  End ADC Start pulse. */
-		*pRPS++ = GPIO_BASE | GPIO1_HI;
-
-		/* Wait for ADC to complete (GPIO2 is asserted high when ADC not
+		/* Start ADC by pulsing GPIO1. */
+		/* Begin ADC Start pulse. */
+		*rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2);
+		*rps++ = S626_GPIO_BASE | S626_GPIO1_LO;
+		*rps++ = S626_RPS_NOP;
+		/* VERSION 2.03 CHANGE: STRETCH OUT ADC START PULSE. */
+		/* End ADC Start pulse. */
+		*rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2);
+		*rps++ = S626_GPIO_BASE | S626_GPIO1_HI;
+		/*
+		 * Wait for ADC to complete (GPIO2 is asserted high when ADC not
 		 * busy) and for data from previous conversion to shift into FB
 		 * BUFFER 1 register.
 		 */
-		*pRPS++ = RPS_PAUSE | RPS_GPIO2;	/*  Wait for ADC done. */
+		/* Wait for ADC done. */
+		*rps++ = S626_RPS_PAUSE | S626_RPS_GPIO2;
 
-		/*  Transfer ADC data from FB BUFFER 1 register to DMA buffer. */
-		*pRPS++ = RPS_STREG | (BUGFIX_STREG(P_FB_BUFFER1) >> 2);
-		*pRPS++ =
-		    (uint32_t) devpriv->ANABuf.PhysicalBase +
-		    (devpriv->AdcItems << 2);
+		/* Transfer ADC data from FB BUFFER 1 register to DMA buffer. */
+		*rps++ = S626_RPS_STREG |
+			 (S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2);
+		*rps++ = (uint32_t)devpriv->ana_buf.physical_base +
+			 (devpriv->adc_items << 2);
 
-		/*  If this slot's EndOfPollList flag is set, all channels have */
-		/*  now been processed. */
-		if (*ppl++ & EOPL) {
-			devpriv->AdcItems++;	/*  Adjust poll list item count. */
-			break;	/*  Exit poll list processing loop. */
+		/*
+		 * If this slot's EndOfPollList flag is set, all channels have
+		 * now been processed.
+		 */
+		if (*ppl++ & S626_EOPL) {
+			devpriv->adc_items++; /* Adjust poll list item count. */
+			break;	/* Exit poll list processing loop. */
 		}
 	}
 
-	/* VERSION 2.01 CHANGE: DELAY CHANGED FROM 250NS to 2US.  Allow the
+	/*
+	 * VERSION 2.01 CHANGE: DELAY CHANGED FROM 250NS to 2US.  Allow the
 	 * ADC to stabilize for 2 microseconds before starting the final
 	 * (dummy) conversion.  This delay is necessary to allow sufficient
 	 * time between last conversion finished and the start of the dummy
 	 * conversion.  Without this delay, the last conversion's data value
 	 * is sometimes set to the previous conversion's data value.
 	 */
-	for (n = 0; n < (2 * RPSCLK_PER_US); n++)
-		*pRPS++ = RPS_NOP;
+	for (n = 0; n < (2 * S626_RPSCLK_PER_US); n++)
+		*rps++ = S626_RPS_NOP;
 
-	/* Start a dummy conversion to cause the data from the last
+	/*
+	 * Start a dummy conversion to cause the data from the last
 	 * conversion of interest to be shifted in.
 	 */
-	*pRPS++ = RPS_LDREG | (P_GPIO >> 2);	/*  Begin ADC Start pulse. */
-	*pRPS++ = GPIO_BASE | GPIO1_LO;
-	*pRPS++ = RPS_NOP;
+	/* Begin ADC Start pulse. */
+	*rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2);
+	*rps++ = S626_GPIO_BASE | S626_GPIO1_LO;
+	*rps++ = S626_RPS_NOP;
 	/* VERSION 2.03 CHANGE: STRETCH OUT ADC START PULSE. */
-	*pRPS++ = RPS_LDREG | (P_GPIO >> 2);	/*  End ADC Start pulse. */
-	*pRPS++ = GPIO_BASE | GPIO1_HI;
+	*rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2); /* End ADC Start pulse. */
+	*rps++ = S626_GPIO_BASE | S626_GPIO1_HI;
 
-	/* Wait for the data from the last conversion of interest to arrive
+	/*
+	 * Wait for the data from the last conversion of interest to arrive
 	 * in FB BUFFER 1 register.
 	 */
-	*pRPS++ = RPS_PAUSE | RPS_GPIO2;	/*  Wait for ADC done. */
+	*rps++ = S626_RPS_PAUSE | S626_RPS_GPIO2;	/* Wait for ADC done. */
 
-	/*  Transfer final ADC data from FB BUFFER 1 register to DMA buffer. */
-	*pRPS++ = RPS_STREG | (BUGFIX_STREG(P_FB_BUFFER1) >> 2);	/*  */
-	*pRPS++ =
-	    (uint32_t) devpriv->ANABuf.PhysicalBase + (devpriv->AdcItems << 2);
+	/* Transfer final ADC data from FB BUFFER 1 register to DMA buffer. */
+	*rps++ = S626_RPS_STREG | (S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2);
+	*rps++ = (uint32_t)devpriv->ana_buf.physical_base +
+		 (devpriv->adc_items << 2);
 
-	/*  Indicate ADC scan loop is finished. */
-	/*  *pRPS++= RPS_CLRSIGNAL | RPS_SIGADC ;  // Signal ReadADC() that scan is done. */
+	/* Indicate ADC scan loop is finished. */
+	/* Signal ReadADC() that scan is done. */
+	/* *rps++= S626_RPS_CLRSIGNAL | S626_RPS_SIGADC; */
 
 	/* invoke interrupt */
-	if (devpriv->ai_cmd_running == 1) {
-		*pRPS++ = RPS_IRQ;
-	}
-	/*  Restart RPS program at its beginning. */
-	*pRPS++ = RPS_JUMP;	/*  Branch to start of RPS program. */
-	*pRPS++ = (uint32_t) devpriv->RPSBuf.PhysicalBase;
+	if (devpriv->ai_cmd_running == 1)
+		*rps++ = S626_RPS_IRQ;
 
-	/*  End of RPS program build */
+	/* Restart RPS program at its beginning. */
+	*rps++ = S626_RPS_JUMP;	/* Branch to start of RPS program. */
+	*rps++ = (uint32_t)devpriv->rps_buf.physical_base;
+
+	/* End of RPS program build */
 }
 
 #ifdef unused_code
@@ -1111,14 +1815,14 @@
 			 unsigned int *data)
 {
 	struct s626_private *devpriv = dev->private;
-	register uint8_t i;
-	register int32_t *readaddr;
+	uint8_t i;
+	int32_t *readaddr;
 
 	/* Trigger ADC scan loop start */
-	s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
+	s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);
 
 	/* Wait until ADC scan loop is finished (RPS Signal 0 reset) */
-	while (s626_mc_test(dev, MC2_ADC_RPS, P_MC2))
+	while (s626_mc_test(dev, S626_MC2_ADC_RPS, S626_P_MC2))
 		;
 
 	/*
@@ -1126,13 +1830,13 @@
 	 * first uint16_t in the buffer because it contains junk data from
 	 * the final ADC of the previous poll list scan.
 	 */
-	readaddr = (uint32_t *)devpriv->ANABuf.LogicalBase + 1;
+	readaddr = (uint32_t *)devpriv->ana_buf.logical_base + 1;
 
 	/*
 	 * Convert ADC data to 16-bit integer values and
 	 * copy to application buffer.
 	 */
-	for (i = 0; i < devpriv->AdcItems; i++) {
+	for (i = 0; i < devpriv->adc_items; i++) {
 		*data = s626_ai_reg_to_uint(*readaddr++);
 		data++;
 	}
@@ -1148,55 +1852,61 @@
 	struct s626_private *devpriv = dev->private;
 	uint16_t chan = CR_CHAN(insn->chanspec);
 	uint16_t range = CR_RANGE(insn->chanspec);
-	uint16_t AdcSpec = 0;
-	uint32_t GpioImage;
-	int tmp;
+	uint16_t adc_spec = 0;
+	uint32_t gpio_image;
+	uint32_t tmp;
 	int n;
 
-	/* Convert application's ADC specification into form
+	/*
+	 * Convert application's ADC specification into form
 	 *  appropriate for register programming.
 	 */
 	if (range == 0)
-		AdcSpec = (chan << 8) | (GSEL_BIPOLAR5V);
+		adc_spec = (chan << 8) | (S626_GSEL_BIPOLAR5V);
 	else
-		AdcSpec = (chan << 8) | (GSEL_BIPOLAR10V);
+		adc_spec = (chan << 8) | (S626_GSEL_BIPOLAR10V);
 
-	/*  Switch ADC analog gain. */
-	DEBIwrite(dev, LP_GSEL, AdcSpec);	/*  Set gain. */
+	/* Switch ADC analog gain. */
+	s626_debi_write(dev, S626_LP_GSEL, adc_spec);	/* Set gain. */
 
-	/*  Select ADC analog input channel. */
-	DEBIwrite(dev, LP_ISEL, AdcSpec);	/*  Select channel. */
+	/* Select ADC analog input channel. */
+	s626_debi_write(dev, S626_LP_ISEL, adc_spec);	/* Select channel. */
 
 	for (n = 0; n < insn->n; n++) {
-
-		/*  Delay 10 microseconds for analog input settling. */
+		/* Delay 10 microseconds for analog input settling. */
 		udelay(10);
 
 		/* Start ADC by pulsing GPIO1 low */
-		GpioImage = readl(devpriv->mmio + P_GPIO);
+		gpio_image = readl(devpriv->mmio + S626_P_GPIO);
 		/* Assert ADC Start command */
-		writel(GpioImage & ~GPIO1_HI, devpriv->mmio + P_GPIO);
+		writel(gpio_image & ~S626_GPIO1_HI,
+		       devpriv->mmio + S626_P_GPIO);
 		/* and stretch it out */
-		writel(GpioImage & ~GPIO1_HI, devpriv->mmio + P_GPIO);
-		writel(GpioImage & ~GPIO1_HI, devpriv->mmio + P_GPIO);
+		writel(gpio_image & ~S626_GPIO1_HI,
+		       devpriv->mmio + S626_P_GPIO);
+		writel(gpio_image & ~S626_GPIO1_HI,
+		       devpriv->mmio + S626_P_GPIO);
 		/* Negate ADC Start command */
-		writel(GpioImage | GPIO1_HI, devpriv->mmio + P_GPIO);
+		writel(gpio_image | S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
 
-		/*  Wait for ADC to complete (GPIO2 is asserted high when */
-		/*  ADC not busy) and for data from previous conversion to */
-		/*  shift into FB BUFFER 1 register. */
+		/*
+		 * Wait for ADC to complete (GPIO2 is asserted high when
+		 * ADC not busy) and for data from previous conversion to
+		 * shift into FB BUFFER 1 register.
+		 */
 
 		/* Wait for ADC done */
-		while (!(readl(devpriv->mmio + P_PSR) & PSR_GPIO2))
+		while (!(readl(devpriv->mmio + S626_P_PSR) & S626_PSR_GPIO2))
 			;
 
 		/* Fetch ADC data */
 		if (n != 0) {
-			tmp = readl(devpriv->mmio + P_FB_BUFFER1);
+			tmp = readl(devpriv->mmio + S626_P_FB_BUFFER1);
 			data[n - 1] = s626_ai_reg_to_uint(tmp);
 		}
 
-		/* Allow the ADC to stabilize for 4 microseconds before
+		/*
+		 * Allow the ADC to stabilize for 4 microseconds before
 		 * starting the next (final) conversion.  This delay is
 		 * necessary to allow sufficient time between last
 		 * conversion finished and the start of the next
@@ -1207,28 +1917,30 @@
 		udelay(4);
 	}
 
-	/* Start a dummy conversion to cause the data from the
-	 * previous conversion to be shifted in. */
-	GpioImage = readl(devpriv->mmio + P_GPIO);
+	/*
+	 * Start a dummy conversion to cause the data from the
+	 * previous conversion to be shifted in.
+	 */
+	gpio_image = readl(devpriv->mmio + S626_P_GPIO);
 	/* Assert ADC Start command */
-	writel(GpioImage & ~GPIO1_HI, devpriv->mmio + P_GPIO);
+	writel(gpio_image & ~S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
 	/* and stretch it out */
-	writel(GpioImage & ~GPIO1_HI, devpriv->mmio + P_GPIO);
-	writel(GpioImage & ~GPIO1_HI, devpriv->mmio + P_GPIO);
+	writel(gpio_image & ~S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
+	writel(gpio_image & ~S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
 	/* Negate ADC Start command */
-	writel(GpioImage | GPIO1_HI, devpriv->mmio + P_GPIO);
+	writel(gpio_image | S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
 
-	/*  Wait for the data to arrive in FB BUFFER 1 register. */
+	/* Wait for the data to arrive in FB BUFFER 1 register. */
 
 	/* Wait for ADC done */
-	while (!(readl(devpriv->mmio + P_PSR) & PSR_GPIO2))
+	while (!(readl(devpriv->mmio + S626_P_PSR) & S626_PSR_GPIO2))
 		;
 
-	/*  Fetch ADC data from audio interface's input shift register. */
+	/* Fetch ADC data from audio interface's input shift register. */
 
 	/* Fetch ADC data */
 	if (n != 0) {
-		tmp = readl(devpriv->mmio + P_FB_BUFFER1);
+		tmp = readl(devpriv->mmio + S626_P_FB_BUFFER1);
 		data[n - 1] = s626_ai_reg_to_uint(tmp);
 	}
 
@@ -1237,17 +1949,16 @@
 
 static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
 {
-
 	int n;
 
 	for (n = 0; n < cmd->chanlist_len; n++) {
-		if (CR_RANGE((cmd->chanlist)[n]) == 0)
-			ppl[n] = (CR_CHAN((cmd->chanlist)[n])) | (RANGE_5V);
+		if (CR_RANGE(cmd->chanlist[n]) == 0)
+			ppl[n] = CR_CHAN(cmd->chanlist[n]) | S626_RANGE_5V;
 		else
-			ppl[n] = (CR_CHAN((cmd->chanlist)[n])) | (RANGE_10V);
+			ppl[n] = CR_CHAN(cmd->chanlist[n]) | S626_RANGE_10V;
 	}
 	if (n != 0)
-		ppl[n - 1] |= EOPL;
+		ppl[n - 1] |= S626_EOPL;
 
 	return n;
 }
@@ -1259,18 +1970,20 @@
 		return -EINVAL;
 
 	/* Start executing the RPS program */
-	s626_mc_enable(dev, MC1_ERPS1, P_MC1);
+	s626_mc_enable(dev, S626_MC1_ERPS1, S626_P_MC1);
 
 	s->async->inttrig = NULL;
 
 	return 1;
 }
 
-/* This function doesn't require a particular form, this is just what
+/*
+ * This function doesn't require a particular form, this is just what
  * happens to be used in some of the drivers.  It should convert ns
  * nanoseconds to a counter value suitable for programming the device.
  * Also, it should adjust ns so that it cooresponds to the actual time
- * that the device will use. */
+ * that the device will use.
+ */
 static int s626_ns_to_timer(int *nanosec, int round_mode)
 {
 	int divider, base;
@@ -1294,68 +2007,75 @@
 	return divider - 1;
 }
 
-static void s626_timer_load(struct comedi_device *dev, struct enc_private *k,
-			    int tick)
+static void s626_timer_load(struct comedi_device *dev,
+			    const struct s626_enc_info *k, int tick)
 {
-	uint16_t Setup = (LOADSRC_INDX << BF_LOADSRC) |	/*  Preload upon */
-	    /*  index. */
-	    (INDXSRC_SOFT << BF_INDXSRC) |	/*  Disable hardware index. */
-	    (CLKSRC_TIMER << BF_CLKSRC) |	/*  Operating mode is Timer. */
-	    (CLKPOL_POS << BF_CLKPOL) |	/*  Active high clock. */
-	    (CNTDIR_DOWN << BF_CLKPOL) |	/*  Count direction is Down. */
-	    (CLKMULT_1X << BF_CLKMULT) |	/*  Clock multiplier is 1x. */
-	    (CLKENAB_INDEX << BF_CLKENAB);
-	uint16_t valueSrclatch = LATCHSRC_A_INDXA;
-	/*   uint16_t enab=CLKENAB_ALWAYS; */
+	uint16_t setup =
+		/* Preload upon index. */
+		S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
+		/* Disable hardware index. */
+		S626_SET_STD_INDXSRC(S626_INDXSRC_SOFT) |
+		/* Operating mode is Timer. */
+		S626_SET_STD_ENCMODE(S626_ENCMODE_TIMER) |
+		/* Count direction is Down. */
+		S626_SET_STD_CLKPOL(S626_CNTDIR_DOWN) |
+		/* Clock multiplier is 1x. */
+		S626_SET_STD_CLKMULT(S626_CLKMULT_1X) |
+		/* Enabled by index */
+		S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);
+	uint16_t value_latchsrc = S626_LATCHSRC_A_INDXA;
+	/* uint16_t enab = S626_CLKENAB_ALWAYS; */
 
-	k->SetMode(dev, k, Setup, FALSE);
+	k->set_mode(dev, k, setup, false);
 
-	/*  Set the preload register */
-	Preload(dev, k, tick);
+	/* Set the preload register */
+	s626_preload(dev, k, tick);
 
-	/*  Software index pulse forces the preload register to load */
-	/*  into the counter */
-	k->SetLoadTrig(dev, k, 0);
-	k->PulseIndex(dev, k);
+	/*
+	 * Software index pulse forces the preload register to load
+	 * into the counter
+	 */
+	k->set_load_trig(dev, k, 0);
+	k->pulse_index(dev, k);
 
 	/* set reload on counter overflow */
-	k->SetLoadTrig(dev, k, 1);
+	k->set_load_trig(dev, k, 1);
 
 	/* set interrupt on overflow */
-	k->SetIntSrc(dev, k, INTSRC_OVER);
+	k->set_int_src(dev, k, S626_INTSRC_OVER);
 
-	SetLatchSource(dev, k, valueSrclatch);
-	/*   k->SetEnable(dev,k,(uint16_t)(enab != 0)); */
+	s626_set_latch_source(dev, k, value_latchsrc);
+	/* k->set_enable(dev, k, (uint16_t)(enab != 0)); */
 }
 
-/*  TO COMPLETE  */
+/* TO COMPLETE  */
 static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct s626_private *devpriv = dev->private;
 	uint8_t ppl[16];
 	struct comedi_cmd *cmd = &s->async->cmd;
-	struct enc_private *k;
+	const struct s626_enc_info *k;
 	int tick;
 
 	if (devpriv->ai_cmd_running) {
-		printk(KERN_ERR "s626_ai_cmd: Another ai_cmd is running %d\n",
-		       dev->minor);
+		dev_err(dev->class_dev,
+			"s626_ai_cmd: Another ai_cmd is running\n");
 		return -EBUSY;
 	}
 	/* disable interrupt */
-	writel(0, devpriv->mmio + P_IER);
+	writel(0, devpriv->mmio + S626_P_IER);
 
 	/* clear interrupt request */
-	writel(IRQ_RPS1 | IRQ_GPIO3, devpriv->mmio + P_ISR);
+	writel(S626_IRQ_RPS1 | S626_IRQ_GPIO3, devpriv->mmio + S626_P_ISR);
 
 	/* clear any pending interrupt */
 	s626_dio_clear_irq(dev);
-	/*   s626_enc_clear_irq(dev); */
+	/* s626_enc_clear_irq(dev); */
 
 	/* reset ai_cmd_running flag */
 	devpriv->ai_cmd_running = 0;
 
-	/*  test if cmd is valid */
+	/* test if cmd is valid */
 	if (cmd == NULL)
 		return -EINVAL;
 
@@ -1373,17 +2093,20 @@
 	case TRIG_FOLLOW:
 		break;
 	case TRIG_TIMER:
-		/*  set a conter to generate adc trigger at scan_begin_arg interval */
-		k = &encpriv[5];
+		/*
+		 * set a counter to generate adc trigger at scan_begin_arg
+		 * interval
+		 */
+		k = &s626_enc_chan_info[5];
 		tick = s626_ns_to_timer((int *)&cmd->scan_begin_arg,
 					cmd->flags & TRIG_ROUND_MASK);
 
 		/* load timer value and enable interrupt */
 		s626_timer_load(dev, k, tick);
-		k->SetEnable(dev, k, CLKENAB_ALWAYS);
+		k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
 		break;
 	case TRIG_EXT:
-		/*  set the digital line and interrupt for scan trigger */
+		/* set the digital line and interrupt for scan trigger */
 		if (cmd->start_src != TRIG_EXT)
 			s626_dio_set_irq(dev, cmd->scan_begin_arg);
 		break;
@@ -1393,52 +2116,53 @@
 	case TRIG_NOW:
 		break;
 	case TRIG_TIMER:
-		/*  set a conter to generate adc trigger at convert_arg interval */
-		k = &encpriv[4];
+		/*
+		 * set a counter to generate adc trigger at convert_arg
+		 * interval
+		 */
+		k = &s626_enc_chan_info[4];
 		tick = s626_ns_to_timer((int *)&cmd->convert_arg,
 					cmd->flags & TRIG_ROUND_MASK);
 
 		/* load timer value and enable interrupt */
 		s626_timer_load(dev, k, tick);
-		k->SetEnable(dev, k, CLKENAB_INDEX);
+		k->set_enable(dev, k, S626_CLKENAB_INDEX);
 		break;
 	case TRIG_EXT:
-		/*  set the digital line and interrupt for convert trigger */
-		if (cmd->scan_begin_src != TRIG_EXT
-		    && cmd->start_src == TRIG_EXT)
+		/* set the digital line and interrupt for convert trigger */
+		if (cmd->scan_begin_src != TRIG_EXT &&
+		    cmd->start_src == TRIG_EXT)
 			s626_dio_set_irq(dev, cmd->convert_arg);
 		break;
 	}
 
 	switch (cmd->stop_src) {
 	case TRIG_COUNT:
-		/*  data arrives as one packet */
+		/* data arrives as one packet */
 		devpriv->ai_sample_count = cmd->stop_arg;
-		devpriv->ai_continous = 0;
+		devpriv->ai_continuous = 0;
 		break;
 	case TRIG_NONE:
-		/*  continous acquisition */
-		devpriv->ai_continous = 1;
+		/* continuous acquisition */
+		devpriv->ai_continuous = 1;
 		devpriv->ai_sample_count = 1;
 		break;
 	}
 
-	ResetADC(dev, ppl);
+	s626_reset_adc(dev, ppl);
 
 	switch (cmd->start_src) {
 	case TRIG_NOW:
 		/* Trigger ADC scan loop start */
-		/* s626_mc_enable(dev, MC2_ADC_RPS, P_MC2); */
+		/* s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2); */
 
 		/* Start executing the RPS program */
-		s626_mc_enable(dev, MC1_ERPS1, P_MC1);
-
+		s626_mc_enable(dev, S626_MC1_ERPS1, S626_P_MC1);
 		s->async->inttrig = NULL;
 		break;
 	case TRIG_EXT:
 		/* configure DIO channel for acquisition trigger */
 		s626_dio_set_irq(dev, cmd->start_arg);
-
 		s->async->inttrig = NULL;
 		break;
 	case TRIG_INT:
@@ -1447,7 +2171,7 @@
 	}
 
 	/* enable interrupt */
-	writel(IRQ_GPIO3 | IRQ_RPS1, devpriv->mmio + P_IER);
+	writel(S626_IRQ_GPIO3 | S626_IRQ_RPS1, devpriv->mmio + S626_P_IER);
 
 	return 0;
 }
@@ -1461,11 +2185,11 @@
 	/* Step 1 : check if triggers are trivially valid */
 
 	err |= cfc_check_trigger_src(&cmd->start_src,
-					TRIG_NOW | TRIG_INT | TRIG_EXT);
+				     TRIG_NOW | TRIG_INT | TRIG_EXT);
 	err |= cfc_check_trigger_src(&cmd->scan_begin_src,
-					TRIG_TIMER | TRIG_EXT | TRIG_FOLLOW);
+				     TRIG_TIMER | TRIG_EXT | TRIG_FOLLOW);
 	err |= cfc_check_trigger_src(&cmd->convert_src,
-					TRIG_TIMER | TRIG_EXT | TRIG_NOW);
+				     TRIG_TIMER | TRIG_EXT | TRIG_NOW);
 	err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
 	err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);
 
@@ -1490,34 +2214,34 @@
 		err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
 	if (cmd->start_src == TRIG_EXT)
 		err |= cfc_check_trigger_arg_max(&cmd->start_arg, 39);
-
 	if (cmd->scan_begin_src == TRIG_EXT)
 		err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 39);
-
 	if (cmd->convert_src == TRIG_EXT)
 		err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 39);
 
-#define MAX_SPEED	200000	/* in nanoseconds */
-#define MIN_SPEED	2000000000	/* in nanoseconds */
+#define S626_MAX_SPEED	200000	/* in nanoseconds */
+#define S626_MIN_SPEED	2000000000	/* in nanoseconds */
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
-						 MAX_SPEED);
+						 S626_MAX_SPEED);
 		err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
-						 MIN_SPEED);
+						 S626_MIN_SPEED);
 	} else {
 		/* external trigger */
 		/* should be level/edge, hi/lo specification here */
 		/* should specify multiple external triggers */
-/*		err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
+		/* err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
 	}
 	if (cmd->convert_src == TRIG_TIMER) {
-		err |= cfc_check_trigger_arg_min(&cmd->convert_arg, MAX_SPEED);
-		err |= cfc_check_trigger_arg_max(&cmd->convert_arg, MIN_SPEED);
+		err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
+						 S626_MAX_SPEED);
+		err |= cfc_check_trigger_arg_max(&cmd->convert_arg,
+						 S626_MIN_SPEED);
 	} else {
 		/* external trigger */
 		/* see above */
-/*		err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
+		/* err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
 	}
 
 	err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
@@ -1546,10 +2270,10 @@
 		if (tmp != cmd->convert_arg)
 			err++;
 		if (cmd->scan_begin_src == TRIG_TIMER &&
-		    cmd->scan_begin_arg <
-		    cmd->convert_arg * cmd->scan_end_arg) {
-			cmd->scan_begin_arg =
-			    cmd->convert_arg * cmd->scan_end_arg;
+		    cmd->scan_begin_arg < cmd->convert_arg *
+					  cmd->scan_end_arg) {
+			cmd->scan_begin_arg = cmd->convert_arg *
+					      cmd->scan_end_arg;
 			err++;
 		}
 	}
@@ -1565,10 +2289,10 @@
 	struct s626_private *devpriv = dev->private;
 
 	/* Stop RPS program in case it is currently running */
-	s626_mc_disable(dev, MC1_ERPS1, P_MC1);
+	s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1);
 
 	/* disable master interrupt */
-	writel(0, devpriv->mmio + P_IER);
+	writel(0, devpriv->mmio + S626_P_IER);
 
 	devpriv->ai_cmd_running = 0;
 
@@ -1588,7 +2312,7 @@
 		devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[i];
 		dacdata -= (0x1fff);
 
-		SetDAC(dev, chan, dacdata);
+		s626_set_dac(dev, chan, dacdata);
 	}
 
 	return i;
@@ -1606,7 +2330,9 @@
 	return i;
 }
 
-/* *************** DIGITAL I/O FUNCTIONS ***************
+/* *************** DIGITAL I/O FUNCTIONS *************** */
+
+/*
  * All DIO functions address a group of DIO channels by means of
  * "group" argument.  group may be 0, 1 or 2, which correspond to DIO
  * ports A, B and C, respectively.
@@ -1616,19 +2342,19 @@
 {
 	uint16_t group;
 
-	/*  Prepare to treat writes to WRCapSel as capture disables. */
-	DEBIwrite(dev, LP_MISC1, MISC1_NOEDCAP);
+	/* Prepare to treat writes to WRCapSel as capture disables. */
+	s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_NOEDCAP);
 
-	/*  For each group of sixteen channels ... */
+	/* For each group of sixteen channels ... */
 	for (group = 0; group < S626_DIO_BANKS; group++) {
 		/* Disable all interrupts */
-		DEBIwrite(dev, LP_WRINTSEL(group), 0);
+		s626_debi_write(dev, S626_LP_WRINTSEL(group), 0);
 		/* Disable all event captures */
-		DEBIwrite(dev, LP_WRCAPSEL(group), 0xffff);
+		s626_debi_write(dev, S626_LP_WRCAPSEL(group), 0xffff);
 		/* Init all DIOs to default edge polarity */
-		DEBIwrite(dev, LP_WREDGSEL(group), 0);
+		s626_debi_write(dev, S626_LP_WREDGSEL(group), 0);
 		/* Program all outputs to inactive state */
-		DEBIwrite(dev, LP_WRDOUT(group), 0);
+		s626_debi_write(dev, S626_LP_WRDOUT(group), 0);
 	}
 }
 
@@ -1638,20 +2364,11 @@
 			      unsigned int *data)
 {
 	unsigned long group = (unsigned long)s->private;
-	unsigned long mask = data[0];
-	unsigned long bits = data[1];
 
-	if (mask) {
-		/* Check if requested channels are configured for output */
-		if ((s->io_bits & mask) != mask)
-			return -EIO;
+	if (comedi_dio_update_state(s, data))
+		s626_debi_write(dev, S626_LP_WRDOUT(group), s->state);
 
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
-		DEBIwrite(dev, LP_WRDOUT(group), s->state);
-	}
-	data[1] = DEBIread(dev, LP_RDDIN(group));
+	data[1] = s626_debi_read(dev, S626_LP_RDDIN(group));
 
 	return insn->n;
 }
@@ -1668,42 +2385,51 @@
 	if (ret)
 		return ret;
 
-	DEBIwrite(dev, LP_WRDOUT(group), s->io_bits);
+	s626_debi_write(dev, S626_LP_WRDOUT(group), s->io_bits);
 
 	return insn->n;
 }
 
-/* Now this function initializes the value of the counter (data[0])
-   and set the subdevice. To complete with trigger and interrupt
-   configuration */
-/* FIXME: data[0] is supposed to be an INSN_CONFIG_xxx constant indicating
+/*
+ * Now this function initializes the value of the counter (data[0])
+ * and set the subdevice. To complete with trigger and interrupt
+ * configuration.
+ *
+ * FIXME: data[0] is supposed to be an INSN_CONFIG_xxx constant indicating
  * what is being configured, but this function appears to be using data[0]
- * as a variable. */
+ * as a variable.
+ */
 static int s626_enc_insn_config(struct comedi_device *dev,
 				struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data)
 {
-	uint16_t Setup = (LOADSRC_INDX << BF_LOADSRC) |	/*  Preload upon */
-	    /*  index. */
-	    (INDXSRC_SOFT << BF_INDXSRC) |	/*  Disable hardware index. */
-	    (CLKSRC_COUNTER << BF_CLKSRC) |	/*  Operating mode is Counter. */
-	    (CLKPOL_POS << BF_CLKPOL) |	/*  Active high clock. */
-	    /* ( CNTDIR_UP << BF_CLKPOL ) |      // Count direction is Down. */
-	    (CLKMULT_1X << BF_CLKMULT) |	/*  Clock multiplier is 1x. */
-	    (CLKENAB_INDEX << BF_CLKENAB);
-	/*   uint16_t DisableIntSrc=TRUE; */
-	/*  uint32_t Preloadvalue;              //Counter initial value */
-	uint16_t valueSrclatch = LATCHSRC_AB_READ;
-	uint16_t enab = CLKENAB_ALWAYS;
-	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
+	uint16_t setup =
+		/* Preload upon index. */
+		S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
+		/* Disable hardware index. */
+		S626_SET_STD_INDXSRC(S626_INDXSRC_SOFT) |
+		/* Operating mode is Counter. */
+		S626_SET_STD_ENCMODE(S626_ENCMODE_COUNTER) |
+		/* Active high clock. */
+		S626_SET_STD_CLKPOL(S626_CLKPOL_POS) |
+		/* Clock multiplier is 1x. */
+		S626_SET_STD_CLKMULT(S626_CLKMULT_1X) |
+		/* Enabled by index */
+		S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);
+	/* uint16_t disable_int_src = true; */
+	/* uint32_t Preloadvalue;              //Counter initial value */
+	uint16_t value_latchsrc = S626_LATCHSRC_AB_READ;
+	uint16_t enab = S626_CLKENAB_ALWAYS;
+	const struct s626_enc_info *k =
+		&s626_enc_chan_info[CR_CHAN(insn->chanspec)];
 
-	/*   (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
+	/* (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
 
-	k->SetMode(dev, k, Setup, TRUE);
-	Preload(dev, k, data[0]);
-	k->PulseIndex(dev, k);
-	SetLatchSource(dev, k, valueSrclatch);
-	k->SetEnable(dev, k, (uint16_t) (enab != 0));
+	k->set_mode(dev, k, setup, true);
+	s626_preload(dev, k, data[0]);
+	k->pulse_index(dev, k);
+	s626_set_latch_source(dev, k, value_latchsrc);
+	k->set_enable(dev, k, (enab != 0));
 
 	return insn->n;
 }
@@ -1712,12 +2438,12 @@
 			      struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data)
 {
-
 	int n;
-	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
+	const struct s626_enc_info *k =
+		&s626_enc_chan_info[CR_CHAN(insn->chanspec)];
 
 	for (n = 0; n < insn->n; n++)
-		data[n] = ReadLatch(dev, k);
+		data[n] = s626_read_latch(dev, k);
 
 	return n;
 }
@@ -1726,31 +2452,32 @@
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data)
 {
+	const struct s626_enc_info *k =
+		&s626_enc_chan_info[CR_CHAN(insn->chanspec)];
 
-	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
+	/* Set the preload register */
+	s626_preload(dev, k, data[0]);
 
-	/*  Set the preload register */
-	Preload(dev, k, data[0]);
-
-	/*  Software index pulse forces the preload register to load */
-	/*  into the counter */
-	k->SetLoadTrig(dev, k, 0);
-	k->PulseIndex(dev, k);
-	k->SetLoadTrig(dev, k, 2);
+	/*
+	 * Software index pulse forces the preload register to load
+	 * into the counter
+	 */
+	k->set_load_trig(dev, k, 0);
+	k->pulse_index(dev, k);
+	k->set_load_trig(dev, k, 2);
 
 	return 1;
 }
 
-static void WriteMISC2(struct comedi_device *dev, uint16_t NewImage)
+static void s626_write_misc2(struct comedi_device *dev, uint16_t new_image)
 {
-	DEBIwrite(dev, LP_MISC1, MISC1_WENABLE);	/*  enab writes to */
-	/*  MISC2 register. */
-	DEBIwrite(dev, LP_WRMISC2, NewImage);	/*  Write new image to MISC2. */
-	DEBIwrite(dev, LP_MISC1, MISC1_WDISABLE);	/*  Disable writes to MISC2. */
+	s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_WENABLE);
+	s626_debi_write(dev, S626_LP_WRMISC2, new_image);
+	s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_WDISABLE);
 }
 
-static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma,
-		      size_t bsize)
+static void s626_close_dma_b(struct comedi_device *dev,
+			     struct s626_buffer_dma *pdma, size_t bsize)
 {
 	struct pci_dev *pcidev = comedi_to_pci_dev(dev);
 	void *vbptr;
@@ -1758,554 +2485,44 @@
 
 	if (pdma == NULL)
 		return;
-	/* find the matching allocation from the board struct */
 
-	vbptr = pdma->LogicalBase;
-	vpptr = pdma->PhysicalBase;
+	/* find the matching allocation from the board struct */
+	vbptr = pdma->logical_base;
+	vpptr = pdma->physical_base;
 	if (vbptr) {
 		pci_free_consistent(pcidev, bsize, vbptr, vpptr);
-		pdma->LogicalBase = NULL;
-		pdma->PhysicalBase = 0;
+		pdma->logical_base = NULL;
+		pdma->physical_base = 0;
 	}
 }
 
-/* ******  PRIVATE COUNTER FUNCTIONS ****** */
-
-/*  Reset a counter's index and overflow event capture flags. */
-
-static void ResetCapFlags_A(struct comedi_device *dev, struct enc_private *k)
-{
-	DEBIreplace(dev, k->MyCRB, ~CRBMSK_INTCTRL,
-		    CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A);
-}
-
-static void ResetCapFlags_B(struct comedi_device *dev, struct enc_private *k)
-{
-	DEBIreplace(dev, k->MyCRB, ~CRBMSK_INTCTRL,
-		    CRBMSK_INTRESETCMD | CRBMSK_INTRESET_B);
-}
-
-/*  Return counter setup in a format (COUNTER_SETUP) that is consistent */
-/*  for both A and B counters. */
-
-static uint16_t GetMode_A(struct comedi_device *dev, struct enc_private *k)
-{
-	register uint16_t cra;
-	register uint16_t crb;
-	register uint16_t setup;
-
-	/*  Fetch CRA and CRB register images. */
-	cra = DEBIread(dev, k->MyCRA);
-	crb = DEBIread(dev, k->MyCRB);
-
-	/*  Populate the standardized counter setup bit fields.  Note: */
-	/*  IndexSrc is restricted to ENC_X or IndxPol. */
-	setup = ((cra & STDMSK_LOADSRC)	/*  LoadSrc  = LoadSrcA. */
-		 |((crb << (STDBIT_LATCHSRC - CRBBIT_LATCHSRC)) & STDMSK_LATCHSRC)	/*  LatchSrc = LatchSrcA. */
-		 |((cra << (STDBIT_INTSRC - CRABIT_INTSRC_A)) & STDMSK_INTSRC)	/*  IntSrc   = IntSrcA. */
-		 |((cra << (STDBIT_INDXSRC - (CRABIT_INDXSRC_A + 1))) & STDMSK_INDXSRC)	/*  IndxSrc  = IndxSrcA<1>. */
-		 |((cra >> (CRABIT_INDXPOL_A - STDBIT_INDXPOL)) & STDMSK_INDXPOL)	/*  IndxPol  = IndxPolA. */
-		 |((crb >> (CRBBIT_CLKENAB_A - STDBIT_CLKENAB)) & STDMSK_CLKENAB));	/*  ClkEnab  = ClkEnabA. */
-
-	/*  Adjust mode-dependent parameters. */
-	if (cra & (2 << CRABIT_CLKSRC_A))	/*  If Timer mode (ClkSrcA<1> == 1): */
-		setup |= ((CLKSRC_TIMER << STDBIT_CLKSRC)	/*    Indicate Timer mode. */
-			  |((cra << (STDBIT_CLKPOL - CRABIT_CLKSRC_A)) & STDMSK_CLKPOL)	/*    Set ClkPol to indicate count direction (ClkSrcA<0>). */
-			  |(MULT_X1 << STDBIT_CLKMULT));	/*    ClkMult must be 1x in Timer mode. */
-
-	else			/*  If Counter mode (ClkSrcA<1> == 0): */
-		setup |= ((CLKSRC_COUNTER << STDBIT_CLKSRC)	/*    Indicate Counter mode. */
-			  |((cra >> (CRABIT_CLKPOL_A - STDBIT_CLKPOL)) & STDMSK_CLKPOL)	/*    Pass through ClkPol. */
-			  |(((cra & CRAMSK_CLKMULT_A) == (MULT_X0 << CRABIT_CLKMULT_A)) ?	/*    Force ClkMult to 1x if not legal, else pass through. */
-			    (MULT_X1 << STDBIT_CLKMULT) :
-			    ((cra >> (CRABIT_CLKMULT_A -
-				      STDBIT_CLKMULT)) & STDMSK_CLKMULT)));
-
-	/*  Return adjusted counter setup. */
-	return setup;
-}
-
-static uint16_t GetMode_B(struct comedi_device *dev, struct enc_private *k)
-{
-	register uint16_t cra;
-	register uint16_t crb;
-	register uint16_t setup;
-
-	/*  Fetch CRA and CRB register images. */
-	cra = DEBIread(dev, k->MyCRA);
-	crb = DEBIread(dev, k->MyCRB);
-
-	/*  Populate the standardized counter setup bit fields.  Note: */
-	/*  IndexSrc is restricted to ENC_X or IndxPol. */
-	setup = (((crb << (STDBIT_INTSRC - CRBBIT_INTSRC_B)) & STDMSK_INTSRC)	/*  IntSrc   = IntSrcB. */
-		 |((crb << (STDBIT_LATCHSRC - CRBBIT_LATCHSRC)) & STDMSK_LATCHSRC)	/*  LatchSrc = LatchSrcB. */
-		 |((crb << (STDBIT_LOADSRC - CRBBIT_LOADSRC_B)) & STDMSK_LOADSRC)	/*  LoadSrc  = LoadSrcB. */
-		 |((crb << (STDBIT_INDXPOL - CRBBIT_INDXPOL_B)) & STDMSK_INDXPOL)	/*  IndxPol  = IndxPolB. */
-		 |((crb >> (CRBBIT_CLKENAB_B - STDBIT_CLKENAB)) & STDMSK_CLKENAB)	/*  ClkEnab  = ClkEnabB. */
-		 |((cra >> ((CRABIT_INDXSRC_B + 1) - STDBIT_INDXSRC)) & STDMSK_INDXSRC));	/*  IndxSrc  = IndxSrcB<1>. */
-
-	/*  Adjust mode-dependent parameters. */
-	if ((crb & CRBMSK_CLKMULT_B) == (MULT_X0 << CRBBIT_CLKMULT_B))	/*  If Extender mode (ClkMultB == MULT_X0): */
-		setup |= ((CLKSRC_EXTENDER << STDBIT_CLKSRC)	/*    Indicate Extender mode. */
-			  |(MULT_X1 << STDBIT_CLKMULT)	/*    Indicate multiplier is 1x. */
-			  |((cra >> (CRABIT_CLKSRC_B - STDBIT_CLKPOL)) & STDMSK_CLKPOL));	/*    Set ClkPol equal to Timer count direction (ClkSrcB<0>). */
-
-	else if (cra & (2 << CRABIT_CLKSRC_B))	/*  If Timer mode (ClkSrcB<1> == 1): */
-		setup |= ((CLKSRC_TIMER << STDBIT_CLKSRC)	/*    Indicate Timer mode. */
-			  |(MULT_X1 << STDBIT_CLKMULT)	/*    Indicate multiplier is 1x. */
-			  |((cra >> (CRABIT_CLKSRC_B - STDBIT_CLKPOL)) & STDMSK_CLKPOL));	/*    Set ClkPol equal to Timer count direction (ClkSrcB<0>). */
-
-	else			/*  If Counter mode (ClkSrcB<1> == 0): */
-		setup |= ((CLKSRC_COUNTER << STDBIT_CLKSRC)	/*    Indicate Timer mode. */
-			  |((crb >> (CRBBIT_CLKMULT_B - STDBIT_CLKMULT)) & STDMSK_CLKMULT)	/*    Clock multiplier is passed through. */
-			  |((crb << (STDBIT_CLKPOL - CRBBIT_CLKPOL_B)) & STDMSK_CLKPOL));	/*    Clock polarity is passed through. */
-
-	/*  Return adjusted counter setup. */
-	return setup;
-}
-
-/*
- * Set the operating mode for the specified counter.  The setup
- * parameter is treated as a COUNTER_SETUP data type.  The following
- * parameters are programmable (all other parms are ignored): ClkMult,
- * ClkPol, ClkEnab, IndexSrc, IndexPol, LoadSrc.
- */
-
-static void SetMode_A(struct comedi_device *dev, struct enc_private *k,
-		      uint16_t Setup, uint16_t DisableIntSrc)
-{
-	struct s626_private *devpriv = dev->private;
-	register uint16_t cra;
-	register uint16_t crb;
-	register uint16_t setup = Setup;	/*  Cache the Standard Setup. */
-
-	/*  Initialize CRA and CRB images. */
-	cra = ((setup & CRAMSK_LOADSRC_A)	/*  Preload trigger is passed through. */
-	       |((setup & STDMSK_INDXSRC) >> (STDBIT_INDXSRC - (CRABIT_INDXSRC_A + 1))));	/*  IndexSrc is restricted to ENC_X or IndxPol. */
-
-	crb = (CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A	/*  Reset any pending CounterA event captures. */
-	       | ((setup & STDMSK_CLKENAB) << (CRBBIT_CLKENAB_A - STDBIT_CLKENAB)));	/*  Clock enable is passed through. */
-
-	/*  Force IntSrc to Disabled if DisableIntSrc is asserted. */
-	if (!DisableIntSrc)
-		cra |= ((setup & STDMSK_INTSRC) >> (STDBIT_INTSRC -
-						    CRABIT_INTSRC_A));
-
-	/*  Populate all mode-dependent attributes of CRA & CRB images. */
-	switch ((setup & STDMSK_CLKSRC) >> STDBIT_CLKSRC) {
-	case CLKSRC_EXTENDER:	/*  Extender Mode: Force to Timer mode */
-		/*  (Extender valid only for B counters). */
-
-	case CLKSRC_TIMER:	/*  Timer Mode: */
-		cra |= ((2 << CRABIT_CLKSRC_A)	/*    ClkSrcA<1> selects system clock */
-			|((setup & STDMSK_CLKPOL) >> (STDBIT_CLKPOL - CRABIT_CLKSRC_A))	/*      with count direction (ClkSrcA<0>) obtained from ClkPol. */
-			|(1 << CRABIT_CLKPOL_A)	/*    ClkPolA behaves as always-on clock enable. */
-			|(MULT_X1 << CRABIT_CLKMULT_A));	/*    ClkMult must be 1x. */
-		break;
-
-	default:		/*  Counter Mode: */
-		cra |= (CLKSRC_COUNTER	/*    Select ENC_C and ENC_D as clock/direction inputs. */
-			| ((setup & STDMSK_CLKPOL) << (CRABIT_CLKPOL_A - STDBIT_CLKPOL))	/*    Clock polarity is passed through. */
-			|(((setup & STDMSK_CLKMULT) == (MULT_X0 << STDBIT_CLKMULT)) ?	/*    Force multiplier to x1 if not legal, otherwise pass through. */
-			  (MULT_X1 << CRABIT_CLKMULT_A) :
-			  ((setup & STDMSK_CLKMULT) << (CRABIT_CLKMULT_A -
-							STDBIT_CLKMULT))));
-	}
-
-	/*  Force positive index polarity if IndxSrc is software-driven only, */
-	/*  otherwise pass it through. */
-	if (~setup & STDMSK_INDXSRC)
-		cra |= ((setup & STDMSK_INDXPOL) << (CRABIT_INDXPOL_A -
-						     STDBIT_INDXPOL));
-
-	/*  If IntSrc has been forced to Disabled, update the MISC2 interrupt */
-	/*  enable mask to indicate the counter interrupt is disabled. */
-	if (DisableIntSrc)
-		devpriv->CounterIntEnabs &= ~k->MyEventBits[3];
-
-	/*  While retaining CounterB and LatchSrc configurations, program the */
-	/*  new counter operating mode. */
-	DEBIreplace(dev, k->MyCRA, CRAMSK_INDXSRC_B | CRAMSK_CLKSRC_B, cra);
-	DEBIreplace(dev, k->MyCRB, ~(CRBMSK_INTCTRL | CRBMSK_CLKENAB_A), crb);
-}
-
-static void SetMode_B(struct comedi_device *dev, struct enc_private *k,
-		      uint16_t Setup, uint16_t DisableIntSrc)
-{
-	struct s626_private *devpriv = dev->private;
-	register uint16_t cra;
-	register uint16_t crb;
-	register uint16_t setup = Setup;	/*  Cache the Standard Setup. */
-
-	/*  Initialize CRA and CRB images. */
-	cra = ((setup & STDMSK_INDXSRC) << ((CRABIT_INDXSRC_B + 1) - STDBIT_INDXSRC));	/*  IndexSrc field is restricted to ENC_X or IndxPol. */
-
-	crb = (CRBMSK_INTRESETCMD | CRBMSK_INTRESET_B	/*  Reset event captures and disable interrupts. */
-	       | ((setup & STDMSK_CLKENAB) << (CRBBIT_CLKENAB_B - STDBIT_CLKENAB))	/*  Clock enable is passed through. */
-	       |((setup & STDMSK_LOADSRC) >> (STDBIT_LOADSRC - CRBBIT_LOADSRC_B)));	/*  Preload trigger source is passed through. */
-
-	/*  Force IntSrc to Disabled if DisableIntSrc is asserted. */
-	if (!DisableIntSrc)
-		crb |= ((setup & STDMSK_INTSRC) >> (STDBIT_INTSRC -
-						    CRBBIT_INTSRC_B));
-
-	/*  Populate all mode-dependent attributes of CRA & CRB images. */
-	switch ((setup & STDMSK_CLKSRC) >> STDBIT_CLKSRC) {
-	case CLKSRC_TIMER:	/*  Timer Mode: */
-		cra |= ((2 << CRABIT_CLKSRC_B)	/*    ClkSrcB<1> selects system clock */
-			|((setup & STDMSK_CLKPOL) << (CRABIT_CLKSRC_B - STDBIT_CLKPOL)));	/*      with direction (ClkSrcB<0>) obtained from ClkPol. */
-		crb |= ((1 << CRBBIT_CLKPOL_B)	/*    ClkPolB behaves as always-on clock enable. */
-			|(MULT_X1 << CRBBIT_CLKMULT_B));	/*    ClkMultB must be 1x. */
-		break;
-
-	case CLKSRC_EXTENDER:	/*  Extender Mode: */
-		cra |= ((2 << CRABIT_CLKSRC_B)	/*    ClkSrcB source is OverflowA (same as "timer") */
-			|((setup & STDMSK_CLKPOL) << (CRABIT_CLKSRC_B - STDBIT_CLKPOL)));	/*      with direction obtained from ClkPol. */
-		crb |= ((1 << CRBBIT_CLKPOL_B)	/*    ClkPolB controls IndexB -- always set to active. */
-			|(MULT_X0 << CRBBIT_CLKMULT_B));	/*    ClkMultB selects OverflowA as the clock source. */
-		break;
-
-	default:		/*  Counter Mode: */
-		cra |= (CLKSRC_COUNTER << CRABIT_CLKSRC_B);	/*    Select ENC_C and ENC_D as clock/direction inputs. */
-		crb |= (((setup & STDMSK_CLKPOL) >> (STDBIT_CLKPOL - CRBBIT_CLKPOL_B))	/*    ClkPol is passed through. */
-			|(((setup & STDMSK_CLKMULT) == (MULT_X0 << STDBIT_CLKMULT)) ?	/*    Force ClkMult to x1 if not legal, otherwise pass through. */
-			  (MULT_X1 << CRBBIT_CLKMULT_B) :
-			  ((setup & STDMSK_CLKMULT) << (CRBBIT_CLKMULT_B -
-							STDBIT_CLKMULT))));
-	}
-
-	/*  Force positive index polarity if IndxSrc is software-driven only, */
-	/*  otherwise pass it through. */
-	if (~setup & STDMSK_INDXSRC)
-		crb |= ((setup & STDMSK_INDXPOL) >> (STDBIT_INDXPOL -
-						     CRBBIT_INDXPOL_B));
-
-	/*  If IntSrc has been forced to Disabled, update the MISC2 interrupt */
-	/*  enable mask to indicate the counter interrupt is disabled. */
-	if (DisableIntSrc)
-		devpriv->CounterIntEnabs &= ~k->MyEventBits[3];
-
-	/*  While retaining CounterA and LatchSrc configurations, program the */
-	/*  new counter operating mode. */
-	DEBIreplace(dev, k->MyCRA, ~(CRAMSK_INDXSRC_B | CRAMSK_CLKSRC_B), cra);
-	DEBIreplace(dev, k->MyCRB, CRBMSK_CLKENAB_A | CRBMSK_LATCHSRC, crb);
-}
-
-/*  Return/set a counter's enable.  enab: 0=always enabled, 1=enabled by index. */
-
-static void SetEnable_A(struct comedi_device *dev, struct enc_private *k,
-			uint16_t enab)
-{
-	DEBIreplace(dev, k->MyCRB, ~(CRBMSK_INTCTRL | CRBMSK_CLKENAB_A),
-		    enab << CRBBIT_CLKENAB_A);
-}
-
-static void SetEnable_B(struct comedi_device *dev, struct enc_private *k,
-			uint16_t enab)
-{
-	DEBIreplace(dev, k->MyCRB, ~(CRBMSK_INTCTRL | CRBMSK_CLKENAB_B),
-		    enab << CRBBIT_CLKENAB_B);
-}
-
-static uint16_t GetEnable_A(struct comedi_device *dev, struct enc_private *k)
-{
-	return (DEBIread(dev, k->MyCRB) >> CRBBIT_CLKENAB_A) & 1;
-}
-
-static uint16_t GetEnable_B(struct comedi_device *dev, struct enc_private *k)
-{
-	return (DEBIread(dev, k->MyCRB) >> CRBBIT_CLKENAB_B) & 1;
-}
-
-/*
- * static uint16_t GetLatchSource(struct comedi_device *dev, struct enc_private *k )
- * {
- *	return ( DEBIread( dev, k->MyCRB) >> CRBBIT_LATCHSRC ) & 3;
- * }
- */
-
-/*
- * Return/set the event that will trigger transfer of the preload
- * register into the counter.  0=ThisCntr_Index, 1=ThisCntr_Overflow,
- * 2=OverflowA (B counters only), 3=disabled.
- */
-
-static void SetLoadTrig_A(struct comedi_device *dev, struct enc_private *k,
-			  uint16_t Trig)
-{
-	DEBIreplace(dev, k->MyCRA, ~CRAMSK_LOADSRC_A,
-		    Trig << CRABIT_LOADSRC_A);
-}
-
-static void SetLoadTrig_B(struct comedi_device *dev, struct enc_private *k,
-			  uint16_t Trig)
-{
-	DEBIreplace(dev, k->MyCRB, ~(CRBMSK_LOADSRC_B | CRBMSK_INTCTRL),
-		    Trig << CRBBIT_LOADSRC_B);
-}
-
-static uint16_t GetLoadTrig_A(struct comedi_device *dev, struct enc_private *k)
-{
-	return (DEBIread(dev, k->MyCRA) >> CRABIT_LOADSRC_A) & 3;
-}
-
-static uint16_t GetLoadTrig_B(struct comedi_device *dev, struct enc_private *k)
-{
-	return (DEBIread(dev, k->MyCRB) >> CRBBIT_LOADSRC_B) & 3;
-}
-
-/* Return/set counter interrupt source and clear any captured
- * index/overflow events.  IntSource: 0=Disabled, 1=OverflowOnly,
- * 2=IndexOnly, 3=IndexAndOverflow.
- */
-
-static void SetIntSrc_A(struct comedi_device *dev, struct enc_private *k,
-			uint16_t IntSource)
-{
-	struct s626_private *devpriv = dev->private;
-
-	/*  Reset any pending counter overflow or index captures. */
-	DEBIreplace(dev, k->MyCRB, ~CRBMSK_INTCTRL,
-		    CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A);
-
-	/*  Program counter interrupt source. */
-	DEBIreplace(dev, k->MyCRA, ~CRAMSK_INTSRC_A,
-		    IntSource << CRABIT_INTSRC_A);
-
-	/*  Update MISC2 interrupt enable mask. */
-	devpriv->CounterIntEnabs =
-	    (devpriv->CounterIntEnabs & ~k->
-	     MyEventBits[3]) | k->MyEventBits[IntSource];
-}
-
-static void SetIntSrc_B(struct comedi_device *dev, struct enc_private *k,
-			uint16_t IntSource)
-{
-	struct s626_private *devpriv = dev->private;
-	uint16_t crb;
-
-	/*  Cache writeable CRB register image. */
-	crb = DEBIread(dev, k->MyCRB) & ~CRBMSK_INTCTRL;
-
-	/*  Reset any pending counter overflow or index captures. */
-	DEBIwrite(dev, k->MyCRB,
-		  (uint16_t) (crb | CRBMSK_INTRESETCMD | CRBMSK_INTRESET_B));
-
-	/*  Program counter interrupt source. */
-	DEBIwrite(dev, k->MyCRB,
-		  (uint16_t) ((crb & ~CRBMSK_INTSRC_B) | (IntSource <<
-							  CRBBIT_INTSRC_B)));
-
-	/*  Update MISC2 interrupt enable mask. */
-	devpriv->CounterIntEnabs =
-	    (devpriv->CounterIntEnabs & ~k->
-	     MyEventBits[3]) | k->MyEventBits[IntSource];
-}
-
-static uint16_t GetIntSrc_A(struct comedi_device *dev, struct enc_private *k)
-{
-	return (DEBIread(dev, k->MyCRA) >> CRABIT_INTSRC_A) & 3;
-}
-
-static uint16_t GetIntSrc_B(struct comedi_device *dev, struct enc_private *k)
-{
-	return (DEBIread(dev, k->MyCRB) >> CRBBIT_INTSRC_B) & 3;
-}
-
-/*  Return/set the clock multiplier. */
-
-/* static void SetClkMult(struct comedi_device *dev, struct enc_private *k, uint16_t value )  */
-/* { */
-/*   k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_CLKMULT ) | ( value << STDBIT_CLKMULT ) ), FALSE ); */
-/* } */
-
-/* static uint16_t GetClkMult(struct comedi_device *dev, struct enc_private *k )  */
-/* { */
-/*   return ( k->GetMode(dev, k ) >> STDBIT_CLKMULT ) & 3; */
-/* } */
-
-/* Return/set the clock polarity. */
-
-/* static void SetClkPol( struct comedi_device *dev,struct enc_private *k, uint16_t value )  */
-/* { */
-/*   k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_CLKPOL ) | ( value << STDBIT_CLKPOL ) ), FALSE ); */
-/* } */
-
-/* static uint16_t GetClkPol(struct comedi_device *dev, struct enc_private *k )  */
-/* { */
-/*   return ( k->GetMode(dev, k ) >> STDBIT_CLKPOL ) & 1; */
-/* } */
-
-/* Return/set the clock source.  */
-
-/* static void SetClkSrc( struct comedi_device *dev,struct enc_private *k, uint16_t value )  */
-/* { */
-/*   k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_CLKSRC ) | ( value << STDBIT_CLKSRC ) ), FALSE ); */
-/* } */
-
-/* static uint16_t GetClkSrc( struct comedi_device *dev,struct enc_private *k )  */
-/* { */
-/*   return ( k->GetMode(dev, k ) >> STDBIT_CLKSRC ) & 3; */
-/* } */
-
-/* Return/set the index polarity. */
-
-/* static void SetIndexPol(struct comedi_device *dev, struct enc_private *k, uint16_t value )  */
-/* { */
-/*   k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_INDXPOL ) | ( (value != 0) << STDBIT_INDXPOL ) ), FALSE ); */
-/* } */
-
-/* static uint16_t GetIndexPol(struct comedi_device *dev, struct enc_private *k )  */
-/* { */
-/*   return ( k->GetMode(dev, k ) >> STDBIT_INDXPOL ) & 1; */
-/* } */
-
-/*  Return/set the index source. */
-
-/* static void SetIndexSrc(struct comedi_device *dev, struct enc_private *k, uint16_t value )  */
-/* { */
-/*   k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_INDXSRC ) | ( (value != 0) << STDBIT_INDXSRC ) ), FALSE ); */
-/* } */
-
-/* static uint16_t GetIndexSrc(struct comedi_device *dev, struct enc_private *k )  */
-/* { */
-/*   return ( k->GetMode(dev, k ) >> STDBIT_INDXSRC ) & 1; */
-/* } */
-
-/*  Generate an index pulse. */
-
-static void PulseIndex_A(struct comedi_device *dev, struct enc_private *k)
-{
-	register uint16_t cra;
-
-	cra = DEBIread(dev, k->MyCRA);	/*  Pulse index. */
-	DEBIwrite(dev, k->MyCRA, (uint16_t) (cra ^ CRAMSK_INDXPOL_A));
-	DEBIwrite(dev, k->MyCRA, cra);
-}
-
-static void PulseIndex_B(struct comedi_device *dev, struct enc_private *k)
-{
-	register uint16_t crb;
-
-	crb = DEBIread(dev, k->MyCRB) & ~CRBMSK_INTCTRL;	/*  Pulse index. */
-	DEBIwrite(dev, k->MyCRB, (uint16_t) (crb ^ CRBMSK_INDXPOL_B));
-	DEBIwrite(dev, k->MyCRB, crb);
-}
-
-static struct enc_private enc_private_data[] = {
-	{
-		.GetEnable	= GetEnable_A,
-		.GetIntSrc	= GetIntSrc_A,
-		.GetLoadTrig	= GetLoadTrig_A,
-		.GetMode	= GetMode_A,
-		.PulseIndex	= PulseIndex_A,
-		.SetEnable	= SetEnable_A,
-		.SetIntSrc	= SetIntSrc_A,
-		.SetLoadTrig	= SetLoadTrig_A,
-		.SetMode	= SetMode_A,
-		.ResetCapFlags	= ResetCapFlags_A,
-		.MyCRA		= LP_CR0A,
-		.MyCRB		= LP_CR0B,
-		.MyLatchLsw	= LP_CNTR0ALSW,
-		.MyEventBits	= EVBITS(0),
-	}, {
-		.GetEnable	= GetEnable_A,
-		.GetIntSrc	= GetIntSrc_A,
-		.GetLoadTrig	= GetLoadTrig_A,
-		.GetMode	= GetMode_A,
-		.PulseIndex	= PulseIndex_A,
-		.SetEnable	= SetEnable_A,
-		.SetIntSrc	= SetIntSrc_A,
-		.SetLoadTrig	= SetLoadTrig_A,
-		.SetMode	= SetMode_A,
-		.ResetCapFlags	= ResetCapFlags_A,
-		.MyCRA		= LP_CR1A,
-		.MyCRB		= LP_CR1B,
-		.MyLatchLsw	= LP_CNTR1ALSW,
-		.MyEventBits	= EVBITS(1),
-	}, {
-		.GetEnable	= GetEnable_A,
-		.GetIntSrc	= GetIntSrc_A,
-		.GetLoadTrig	= GetLoadTrig_A,
-		.GetMode	= GetMode_A,
-		.PulseIndex	= PulseIndex_A,
-		.SetEnable	= SetEnable_A,
-		.SetIntSrc	= SetIntSrc_A,
-		.SetLoadTrig	= SetLoadTrig_A,
-		.SetMode	= SetMode_A,
-		.ResetCapFlags	= ResetCapFlags_A,
-		.MyCRA		= LP_CR2A,
-		.MyCRB		= LP_CR2B,
-		.MyLatchLsw	= LP_CNTR2ALSW,
-		.MyEventBits	= EVBITS(2),
-	}, {
-		.GetEnable	= GetEnable_B,
-		.GetIntSrc	= GetIntSrc_B,
-		.GetLoadTrig	= GetLoadTrig_B,
-		.GetMode	= GetMode_B,
-		.PulseIndex	= PulseIndex_B,
-		.SetEnable	= SetEnable_B,
-		.SetIntSrc	= SetIntSrc_B,
-		.SetLoadTrig	= SetLoadTrig_B,
-		.SetMode	= SetMode_B,
-		.ResetCapFlags	= ResetCapFlags_B,
-		.MyCRA		= LP_CR0A,
-		.MyCRB		= LP_CR0B,
-		.MyLatchLsw	= LP_CNTR0BLSW,
-		.MyEventBits	= EVBITS(3),
-	}, {
-		.GetEnable	= GetEnable_B,
-		.GetIntSrc	= GetIntSrc_B,
-		.GetLoadTrig	= GetLoadTrig_B,
-		.GetMode	= GetMode_B,
-		.PulseIndex	= PulseIndex_B,
-		.SetEnable	= SetEnable_B,
-		.SetIntSrc	= SetIntSrc_B,
-		.SetLoadTrig	= SetLoadTrig_B,
-		.SetMode	= SetMode_B,
-		.ResetCapFlags	= ResetCapFlags_B,
-		.MyCRA		= LP_CR1A,
-		.MyCRB		= LP_CR1B,
-		.MyLatchLsw	= LP_CNTR1BLSW,
-		.MyEventBits	= EVBITS(4),
-	}, {
-		.GetEnable	= GetEnable_B,
-		.GetIntSrc	= GetIntSrc_B,
-		.GetLoadTrig	= GetLoadTrig_B,
-		.GetMode	= GetMode_B,
-		.PulseIndex	= PulseIndex_B,
-		.SetEnable	= SetEnable_B,
-		.SetIntSrc	= SetIntSrc_B,
-		.SetLoadTrig	= SetLoadTrig_B,
-		.SetMode	= SetMode_B,
-		.ResetCapFlags	= ResetCapFlags_B,
-		.MyCRA		= LP_CR2A,
-		.MyCRB		= LP_CR2B,
-		.MyLatchLsw	= LP_CNTR2BLSW,
-		.MyEventBits	= EVBITS(5),
-	},
-};
-
-static void CountersInit(struct comedi_device *dev)
+static void s626_counters_init(struct comedi_device *dev)
 {
 	int chan;
-	struct enc_private *k;
-	uint16_t Setup = (LOADSRC_INDX << BF_LOADSRC) |	/*  Preload upon */
-	    /*  index. */
-	    (INDXSRC_SOFT << BF_INDXSRC) |	/*  Disable hardware index. */
-	    (CLKSRC_COUNTER << BF_CLKSRC) |	/*  Operating mode is counter. */
-	    (CLKPOL_POS << BF_CLKPOL) |	/*  Active high clock. */
-	    (CNTDIR_UP << BF_CLKPOL) |	/*  Count direction is up. */
-	    (CLKMULT_1X << BF_CLKMULT) |	/*  Clock multiplier is 1x. */
-	    (CLKENAB_INDEX << BF_CLKENAB);	/*  Enabled by index */
+	const struct s626_enc_info *k;
+	uint16_t setup =
+		/* Preload upon index. */
+		S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
+		/* Disable hardware index. */
+		S626_SET_STD_INDXSRC(S626_INDXSRC_SOFT) |
+		/* Operating mode is counter. */
+		S626_SET_STD_ENCMODE(S626_ENCMODE_COUNTER) |
+		/* Active high clock. */
+		S626_SET_STD_CLKPOL(S626_CLKPOL_POS) |
+		/* Clock multiplier is 1x. */
+		S626_SET_STD_CLKMULT(S626_CLKMULT_1X) |
+		/* Enabled by index */
+		S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);
 
-	/*  Disable all counter interrupts and clear any captured counter events. */
+	/*
+	 * Disable all counter interrupts and clear any captured counter events.
+	 */
 	for (chan = 0; chan < S626_ENCODER_CHANNELS; chan++) {
-		k = &encpriv[chan];
-		k->SetMode(dev, k, Setup, TRUE);
-		k->SetIntSrc(dev, k, 0);
-		k->ResetCapFlags(dev, k);
-		k->SetEnable(dev, k, CLKENAB_ALWAYS);
+		k = &s626_enc_chan_info[chan];
+		k->set_mode(dev, k, setup, true);
+		k->set_int_src(dev, k, 0);
+		k->reset_cap_flags(dev, k);
+		k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
 	}
 }
 
@@ -2316,17 +2533,17 @@
 	void *addr;
 	dma_addr_t appdma;
 
-	addr = pci_alloc_consistent(pcidev, DMABUF_SIZE, &appdma);
+	addr = pci_alloc_consistent(pcidev, S626_DMABUF_SIZE, &appdma);
 	if (!addr)
 		return -ENOMEM;
-	devpriv->ANABuf.LogicalBase = addr;
-	devpriv->ANABuf.PhysicalBase = appdma;
+	devpriv->ana_buf.logical_base = addr;
+	devpriv->ana_buf.physical_base = appdma;
 
-	addr = pci_alloc_consistent(pcidev, DMABUF_SIZE, &appdma);
+	addr = pci_alloc_consistent(pcidev, S626_DMABUF_SIZE, &appdma);
 	if (!addr)
 		return -ENOMEM;
-	devpriv->RPSBuf.LogicalBase = addr;
-	devpriv->RPSBuf.PhysicalBase = appdma;
+	devpriv->rps_buf.logical_base = addr;
+	devpriv->rps_buf.physical_base = appdma;
 
 	return 0;
 }
@@ -2334,42 +2551,43 @@
 static void s626_initialize(struct comedi_device *dev)
 {
 	struct s626_private *devpriv = dev->private;
-	dma_addr_t pPhysBuf;
+	dma_addr_t phys_buf;
 	uint16_t chan;
 	int i;
 
 	/* Enable DEBI and audio pins, enable I2C interface */
-	s626_mc_enable(dev, MC1_DEBI | MC1_AUDIO | MC1_I2C, P_MC1);
+	s626_mc_enable(dev, S626_MC1_DEBI | S626_MC1_AUDIO | S626_MC1_I2C,
+		       S626_P_MC1);
 
 	/*
-	 *  Configure DEBI operating mode
+	 * Configure DEBI operating mode
 	 *
-	 *   Local bus is 16 bits wide
-	 *   Declare DEBI transfer timeout interval
-	 *   Set up byte lane steering
-	 *   Intel-compatible local bus (DEBI never times out)
+	 *  Local bus is 16 bits wide
+	 *  Declare DEBI transfer timeout interval
+	 *  Set up byte lane steering
+	 *  Intel-compatible local bus (DEBI never times out)
 	 */
-	writel(DEBI_CFG_SLAVE16 |
-	       (DEBI_TOUT << DEBI_CFG_TOUT_BIT) |
-	       DEBI_SWAP | DEBI_CFG_INTEL,
-	       devpriv->mmio + P_DEBICFG);
+	writel(S626_DEBI_CFG_SLAVE16 |
+	       (S626_DEBI_TOUT << S626_DEBI_CFG_TOUT_BIT) | S626_DEBI_SWAP |
+	       S626_DEBI_CFG_INTEL, devpriv->mmio + S626_P_DEBICFG);
 
 	/* Disable MMU paging */
-	writel(DEBI_PAGE_DISABLE, devpriv->mmio + P_DEBIPAGE);
+	writel(S626_DEBI_PAGE_DISABLE, devpriv->mmio + S626_P_DEBIPAGE);
 
 	/* Init GPIO so that ADC Start* is negated */
-	writel(GPIO_BASE | GPIO1_HI, devpriv->mmio + P_GPIO);
+	writel(S626_GPIO_BASE | S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
 
 	/* I2C device address for onboard eeprom (revb) */
-	devpriv->I2CAdrs = 0xA0;
+	devpriv->i2c_adrs = 0xA0;
 
 	/*
 	 * Issue an I2C ABORT command to halt any I2C
 	 * operation in progress and reset BUSY flag.
 	 */
-	writel(I2C_CLKSEL | I2C_ABORT, devpriv->mmio + P_I2CSTAT);
-	s626_mc_enable(dev, MC2_UPLD_IIC, P_MC2);
-	while (!(readl(devpriv->mmio + P_MC2) & MC2_UPLD_IIC))
+	writel(S626_I2C_CLKSEL | S626_I2C_ABORT,
+	       devpriv->mmio + S626_P_I2CSTAT);
+	s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
+	while (!(readl(devpriv->mmio + S626_P_MC2) & S626_MC2_UPLD_IIC))
 		;
 
 	/*
@@ -2377,9 +2595,9 @@
 	 * reg twice to reset all  I2C error flags.
 	 */
 	for (i = 0; i < 2; i++) {
-		writel(I2C_CLKSEL, devpriv->mmio + P_I2CSTAT);
-		s626_mc_enable(dev, MC2_UPLD_IIC, P_MC2);
-		while (!s626_mc_test(dev, MC2_UPLD_IIC, P_MC2))
+		writel(S626_I2C_CLKSEL, devpriv->mmio + S626_P_I2CSTAT);
+		s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
+		while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
 			;
 	}
 
@@ -2389,31 +2607,32 @@
 	 * DAC data setup times are satisfied, enable DAC serial
 	 * clock out.
 	 */
-	writel(ACON2_INIT, devpriv->mmio + P_ACON2);
+	writel(S626_ACON2_INIT, devpriv->mmio + S626_P_ACON2);
 
 	/*
 	 * Set up TSL1 slot list, which is used to control the
-	 * accumulation of ADC data: RSD1 = shift data in on SD1.
-	 * SIB_A1  = store data uint8_t at next available location
+	 * accumulation of ADC data: S626_RSD1 = shift data in on SD1.
+	 * S626_SIB_A1  = store data uint8_t at next available location
 	 * in FB BUFFER1 register.
 	 */
-	writel(RSD1 | SIB_A1, devpriv->mmio + P_TSL1);
-	writel(RSD1 | SIB_A1 | EOS, devpriv->mmio + P_TSL1 + 4);
+	writel(S626_RSD1 | S626_SIB_A1, devpriv->mmio + S626_P_TSL1);
+	writel(S626_RSD1 | S626_SIB_A1 | S626_EOS,
+	       devpriv->mmio + S626_P_TSL1 + 4);
 
 	/* Enable TSL1 slot list so that it executes all the time */
-	writel(ACON1_ADCSTART, devpriv->mmio + P_ACON1);
+	writel(S626_ACON1_ADCSTART, devpriv->mmio + S626_P_ACON1);
 
 	/*
 	 * Initialize RPS registers used for ADC
 	 */
 
 	/* Physical start of RPS program */
-	writel((uint32_t)devpriv->RPSBuf.PhysicalBase,
-	       devpriv->mmio + P_RPSADDR1);
+	writel((uint32_t)devpriv->rps_buf.physical_base,
+	       devpriv->mmio + S626_P_RPSADDR1);
 	/* RPS program performs no explicit mem writes */
-	writel(0, devpriv->mmio + P_RPSPAGE1);
+	writel(0, devpriv->mmio + S626_P_RPSPAGE1);
 	/* Disable RPS timeouts */
-	writel(0, devpriv->mmio + P_RPS1_TOUT);
+	writel(0, devpriv->mmio + S626_P_RPS1_TOUT);
 
 #if 0
 	/*
@@ -2425,38 +2644,37 @@
 	 * because the SAA7146 ADC interface does not start up in
 	 * a defined state after a PCI reset.
 	 */
-
 	{
-	uint8_t PollList;
-	uint16_t AdcData;
-	uint16_t StartVal;
-	uint16_t index;
-	unsigned int data[16];
+		uint8_t poll_list;
+		uint16_t adc_data;
+		uint16_t start_val;
+		uint16_t index;
+		unsigned int data[16];
 
-	/* Create a simple polling list for analog input channel 0 */
-	PollList = EOPL;
-	ResetADC(dev, &PollList);
+		/* Create a simple polling list for analog input channel 0 */
+		poll_list = S626_EOPL;
+		s626_reset_adc(dev, &poll_list);
 
-	/* Get initial ADC value */
-	s626_ai_rinsn(dev, dev->subdevices, NULL, data);
-	StartVal = data[0];
-
-	/*
-	 * VERSION 2.01 CHANGE: TIMEOUT ADDED TO PREVENT HANGED EXECUTION.
-	 *
-	 * Invoke ADCs until the new ADC value differs from the initial
-	 * value or a timeout occurs.  The timeout protects against the
-	 * possibility that the driver is restarting and the ADC data is a
-	 * fixed value resulting from the applied ADC analog input being
-	 * unusually quiet or at the rail.
-	 */
-	for (index = 0; index < 500; index++) {
+		/* Get initial ADC value */
 		s626_ai_rinsn(dev, dev->subdevices, NULL, data);
-		AdcData = data[0];
-		if (AdcData != StartVal)
-			break;
-	}
+		start_val = data[0];
 
+		/*
+		 * VERSION 2.01 CHANGE: TIMEOUT ADDED TO PREVENT HANGED
+		 * EXECUTION.
+		 *
+		 * Invoke ADCs until the new ADC value differs from the initial
+		 * value or a timeout occurs.  The timeout protects against the
+		 * possibility that the driver is restarting and the ADC data is
+		 * a fixed value resulting from the applied ADC analog input
+		 * being unusually quiet or at the rail.
+		 */
+		for (index = 0; index < 500; index++) {
+			s626_ai_rinsn(dev, dev->subdevices, NULL, data);
+			adc_data = data[0];
+			if (adc_data != start_val)
+				break;
+		}
 	}
 #endif	/* SAA7146 BUG WORKAROUND */
 
@@ -2469,7 +2687,7 @@
 	 *   burst length = 1 DWORD
 	 *   threshold = 1 DWORD.
 	 */
-	writel(0, devpriv->mmio + P_PCI_BT_A);
+	writel(0, devpriv->mmio + S626_P_PCI_BT_A);
 
 	/*
 	 * Init Audio2's output DMA physical addresses.  The protection
@@ -2477,18 +2695,18 @@
 	 * single DWORD will be transferred each time a DMA transfer is
 	 * enabled.
 	 */
-	pPhysBuf = devpriv->ANABuf.PhysicalBase +
-		   (DAC_WDMABUF_OS * sizeof(uint32_t));
-	writel((uint32_t)pPhysBuf, devpriv->mmio + P_BASEA2_OUT);
-	writel((uint32_t)(pPhysBuf + sizeof(uint32_t)),
-	       devpriv->mmio + P_PROTA2_OUT);
+	phys_buf = devpriv->ana_buf.physical_base +
+		   (S626_DAC_WDMABUF_OS * sizeof(uint32_t));
+	writel((uint32_t)phys_buf, devpriv->mmio + S626_P_BASEA2_OUT);
+	writel((uint32_t)(phys_buf + sizeof(uint32_t)),
+	       devpriv->mmio + S626_P_PROTA2_OUT);
 
 	/*
 	 * Cache Audio2's output DMA buffer logical address.  This is
 	 * where DAC data is buffered for A2 output DMA transfers.
 	 */
-	devpriv->pDacWBuf = (uint32_t *)devpriv->ANABuf.LogicalBase +
-			    DAC_WDMABUF_OS;
+	devpriv->dac_wbuf = (uint32_t *)devpriv->ana_buf.logical_base +
+			    S626_DAC_WDMABUF_OS;
 
 	/*
 	 * Audio2's output channels does not use paging.  The
@@ -2496,7 +2714,7 @@
 	 * DMAC will automatically halt and its PCI address pointer
 	 * will be reset when the protection address is reached.
 	 */
-	writel(8, devpriv->mmio + P_PAGEA2_OUT);
+	writel(8, devpriv->mmio + S626_P_PAGEA2_OUT);
 
 	/*
 	 * Initialize time slot list 2 (TSL2), which is used to control
@@ -2511,7 +2729,8 @@
 	 */
 
 	/* Slot 0: Trap TSL execution, shift 0xFF into FB_BUFFER2 */
-	writel(XSD2 | RSD3 | SIB_A2 | EOS, devpriv->mmio + VECTPORT(0));
+	writel(S626_XSD2 | S626_RSD3 | S626_SIB_A2 | S626_EOS,
+	       devpriv->mmio + S626_VECTPORT(0));
 
 	/*
 	 * Initialize slot 1, which is constant.  Slot 1 causes a
@@ -2523,18 +2742,18 @@
 	 */
 
 	/* Slot 1: Fetch DWORD from Audio2's output FIFO */
-	writel(LF_A2, devpriv->mmio + VECTPORT(1));
+	writel(S626_LF_A2, devpriv->mmio + S626_VECTPORT(1));
 
 	/* Start DAC's audio interface (TSL2) running */
-	writel(ACON1_DACSTART, devpriv->mmio + P_ACON1);
+	writel(S626_ACON1_DACSTART, devpriv->mmio + S626_P_ACON1);
 
 	/*
 	 * Init Trim DACs to calibrated values.  Do it twice because the
 	 * SAA7146 audio channel does not always reset properly and
 	 * sometimes causes the first few TrimDAC writes to malfunction.
 	 */
-	LoadTrimDACs(dev);
-	LoadTrimDACs(dev);
+	s626_load_trim_dacs(dev);
+	s626_load_trim_dacs(dev);
 
 	/*
 	 * Manually init all gate array hardware in case this is a soft
@@ -2549,10 +2768,10 @@
 	 * polarity images.
 	 */
 	for (chan = 0; chan < S626_DAC_CHANNELS; chan++)
-		SetDAC(dev, chan, 0);
+		s626_set_dac(dev, chan, 0);
 
 	/* Init counters */
-	CountersInit(dev);
+	s626_counters_init(dev);
 
 	/*
 	 * Without modifying the state of the Battery Backup enab, disable
@@ -2560,8 +2779,8 @@
 	 * standard DIO (vs. counter overflow) mode, disable the battery
 	 * charger, and reset the watchdog interval selector to zero.
 	 */
-	WriteMISC2(dev, (uint16_t)(DEBIread(dev, LP_RDMISC2) &
-				   MISC2_BATT_ENABLE));
+	s626_write_misc2(dev, (s626_debi_read(dev, S626_LP_RDMISC2) &
+			       S626_MISC2_BATT_ENABLE));
 
 	/* Initialize the digital I/O subsystem */
 	s626_dio_init(dev);
@@ -2588,10 +2807,10 @@
 		return -ENOMEM;
 
 	/* disable master interrupt */
-	writel(0, devpriv->mmio + P_IER);
+	writel(0, devpriv->mmio + S626_P_IER);
 
 	/* soft reset */
-	writel(MC1_SOFT_RESET, devpriv->mmio + P_MC1);
+	writel(S626_MC1_SOFT_RESET, devpriv->mmio + S626_P_MC1);
 
 	/* DMA FIXME DMA// */
 
@@ -2670,7 +2889,7 @@
 	s->io_bits	= 0xffff;
 	s->private	= (void *)2;	/* DIO group 2 */
 	s->range_table	= &range_digital;
-	s->insn_config 	= s626_dio_insn_config;
+	s->insn_config	= s626_dio_insn_config;
 	s->insn_bits	= s626_dio_insn_bits;
 
 	s = &dev->subdevices[5];
@@ -2679,7 +2898,6 @@
 	s->subdev_flags	= SDF_WRITABLE | SDF_READABLE | SDF_LSAMPL;
 	s->n_chan	= S626_ENCODER_CHANNELS;
 	s->maxdata	= 0xffffff;
-	s->private	= enc_private_data;
 	s->range_table	= &range_unknown;
 	s->insn_config	= s626_enc_insn_config;
 	s->insn_read	= s626_enc_insn_read;
@@ -2703,20 +2921,22 @@
 		if (devpriv->mmio) {
 			/* interrupt mask */
 			/* Disable master interrupt */
-			writel(0, devpriv->mmio + P_IER);
+			writel(0, devpriv->mmio + S626_P_IER);
 			/* Clear board's IRQ status flag */
-			writel(IRQ_GPIO3 | IRQ_RPS1,
-			       devpriv->mmio + P_ISR);
+			writel(S626_IRQ_GPIO3 | S626_IRQ_RPS1,
+			       devpriv->mmio + S626_P_ISR);
 
-			/*  Disable the watchdog timer and battery charger. */
-			WriteMISC2(dev, 0);
+			/* Disable the watchdog timer and battery charger. */
+			s626_write_misc2(dev, 0);
 
 			/* Close all interfaces on 7146 device */
-			writel(MC1_SHUTDOWN, devpriv->mmio + P_MC1);
-			writel(ACON1_BASE, devpriv->mmio + P_ACON1);
+			writel(S626_MC1_SHUTDOWN, devpriv->mmio + S626_P_MC1);
+			writel(S626_ACON1_BASE, devpriv->mmio + S626_P_ACON1);
 
-			CloseDMAB(dev, &devpriv->RPSBuf, DMABUF_SIZE);
-			CloseDMAB(dev, &devpriv->ANABuf, DMABUF_SIZE);
+			s626_close_dma_b(dev, &devpriv->rps_buf,
+					 S626_DMABUF_SIZE);
+			s626_close_dma_b(dev, &devpriv->ana_buf,
+					 S626_DMABUF_SIZE);
 		}
 
 		if (dev->irq)
@@ -2746,8 +2966,8 @@
  * Philips SAA7146 media/dvb based cards.
  */
 static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
-	{ PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626,
-		PCI_SUBVENDOR_ID_S626, PCI_SUBDEVICE_ID_S626, 0, 0, 0 },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146,
+			 0x6000, 0x0272) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, s626_pci_table);
diff --git a/drivers/staging/comedi/drivers/s626.h b/drivers/staging/comedi/drivers/s626.h
index a85e6bd..33b7273 100644
--- a/drivers/staging/comedi/drivers/s626.h
+++ b/drivers/staging/comedi/drivers/s626.h
@@ -1,690 +1,774 @@
 /*
-  comedi/drivers/s626.h
-  Sensoray s626 Comedi driver, header file
+ * comedi/drivers/s626.h
+ * Sensoray s626 Comedi driver, header file
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * Based on Sensoray Model 626 Linux driver Version 0.2
+ * Copyright (C) 2002-2004 Sensoray Co., Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
-  COMEDI - Linux Control and Measurement Device Interface
-  Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+#ifndef S626_H_INCLUDED
+#define S626_H_INCLUDED
 
-  Based on Sensoray Model 626 Linux driver Version 0.2
-  Copyright (C) 2002-2004 Sensoray Co., Inc.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-*/
-
-/*
-  Driver: s626.o (s626.ko)
-  Description: Sensoray 626 driver
-  Devices: Sensoray s626
-  Authors: Gianluca Palli <gpalli@deis.unibo.it>,
-  Updated: Thu, 12 Jul 2005
-  Status: experimental
-
-  Configuration Options:
-  analog input:
-   none
-
-  analog output:
-   none
-
-  digital channel:
-   s626 has 3 dio subdevices (2,3 and 4) each with 16 i/o channels
-   supported configuration options:
-   INSN_CONFIG_DIO_QUERY
-   COMEDI_INPUT
-   COMEDI_OUTPUT
-
-  encoder:
-   Every channel must be configured before reading.
-
-   Example code
-
-   insn.insn=INSN_CONFIG;   // configuration instruction
-   insn.n=1;                // number of operation (must be 1)
-   insn.data=&initialvalue; // initial value loaded into encoder
-                            // during configuration
-   insn.subdev=5;           // encoder subdevice
-   insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); // encoder_channel
-                                                        // to configure
-
-   comedi_do_insn(cf,&insn); // executing configuration
-*/
-
-#if !defined(TRUE)
-#define TRUE    (1)
-#endif
-
-#if !defined(FALSE)
-#define FALSE   (0)
-#endif
-
-#define S626_SIZE 0x0200
-#define DMABUF_SIZE			4096	/*  4k pages */
+#define S626_DMABUF_SIZE	4096	/* 4k pages */
 
 #define S626_ADC_CHANNELS       16
 #define S626_DAC_CHANNELS       4
 #define S626_ENCODER_CHANNELS   6
 #define S626_DIO_CHANNELS       48
-#define S626_DIO_BANKS		3	/*  Number of DIO groups. */
-#define S626_DIO_EXTCHANS	40	/*  Number of */
-					/*  extended-capability */
-					/*  DIO channels. */
+#define S626_DIO_BANKS		3	/* Number of DIO groups. */
+#define S626_DIO_EXTCHANS	40	/* Number of extended-capability
+					 * DIO channels. */
 
-#define NUM_TRIMDACS	12	/*  Number of valid TrimDAC channels. */
+#define S626_NUM_TRIMDACS	12	/* Number of valid TrimDAC channels. */
 
-/*  PCI bus interface types. */
-#define INTEL				1	/*  Intel bus type. */
-#define MOTOROLA			2	/*  Motorola bus type. */
+/* PCI bus interface types. */
+#define S626_INTEL		1	/* Intel bus type. */
+#define S626_MOTOROLA		2	/* Motorola bus type. */
 
-#define PLATFORM		INTEL	/*  *** SELECT PLATFORM TYPE *** */
+#define S626_PLATFORM		S626_INTEL /* *** SELECT PLATFORM TYPE *** */
 
-#define RANGE_5V                0x10	/*  +/-5V range */
-#define RANGE_10V               0x00	/*  +/-10V range */
+#define S626_RANGE_5V		0x10	/* +/-5V range */
+#define S626_RANGE_10V		0x00	/* +/-10V range */
 
-#define EOPL			0x80	/*  End of ADC poll list marker. */
-#define GSEL_BIPOLAR5V		0x00F0	/*  LP_GSEL setting for 5V bipolar range. */
-#define GSEL_BIPOLAR10V		0x00A0	/*  LP_GSEL setting for 10V bipolar range. */
+#define S626_EOPL		0x80	/* End of ADC poll list marker. */
+#define S626_GSEL_BIPOLAR5V	0x00F0	/* S626_LP_GSEL setting 5V bipolar. */
+#define S626_GSEL_BIPOLAR10V	0x00A0	/* S626_LP_GSEL setting 10V bipolar. */
 
-/*  Error codes that must be visible to this base class. */
-#define ERR_ILLEGAL_PARM	0x00010000	/*  Illegal function parameter value was specified. */
-#define ERR_I2C			0x00020000	/*  I2C error. */
-#define ERR_COUNTERSETUP	0x00200000	/*  Illegal setup specified for counter channel. */
-#define ERR_DEBI_TIMEOUT	0x00400000	/*  DEBI transfer timed out. */
+/* Error codes that must be visible to this base class. */
+#define S626_ERR_ILLEGAL_PARM	0x00010000	/* Illegal function parameter
+						 * value was specified. */
+#define S626_ERR_I2C		0x00020000	/* I2C error. */
+#define S626_ERR_COUNTERSETUP	0x00200000	/* Illegal setup specified for
+						 * counter channel. */
+#define S626_ERR_DEBI_TIMEOUT	0x00400000	/* DEBI transfer timed out. */
 
-/*  Organization (physical order) and size (in DWORDs) of logical DMA buffers contained by ANA_DMABUF. */
-#define ADC_DMABUF_DWORDS	40	/*  ADC DMA buffer must hold 16 samples, plus pre/post garbage samples. */
-#define DAC_WDMABUF_DWORDS	1	/*  DAC output DMA buffer holds a single sample. */
+/*
+ * Organization (physical order) and size (in DWORDs) of logical DMA buffers
+ * contained by ANA_DMABUF.
+ */
+#define S626_ADC_DMABUF_DWORDS	40	/* ADC DMA buffer must hold 16 samples,
+					 * plus pre/post garbage samples. */
+#define S626_DAC_WDMABUF_DWORDS	1	/* DAC output DMA buffer holds a single
+					 * sample. */
 
-/*  All remaining space in 4KB DMA buffer is available for the RPS1 program. */
+/* All remaining space in 4KB DMA buffer is available for the RPS1 program. */
 
-/*  Address offsets, in DWORDS, from base of DMA buffer. */
-#define DAC_WDMABUF_OS		ADC_DMABUF_DWORDS
+/* Address offsets, in DWORDS, from base of DMA buffer. */
+#define S626_DAC_WDMABUF_OS	S626_ADC_DMABUF_DWORDS
 
-/*  Interrupt enab bit in ISR and IER. */
-#define IRQ_GPIO3		0x00000040	/*  IRQ enable for GPIO3. */
-#define IRQ_RPS1                0x10000000
-#define ISR_AFOU		0x00000800
+/*  Interrupt enable bit in ISR and IER. */
+#define S626_IRQ_GPIO3		0x00000040	/* IRQ enable for GPIO3. */
+#define S626_IRQ_RPS1		0x10000000
+#define S626_ISR_AFOU		0x00000800
 /* Audio fifo under/overflow  detected. */
 
-#define IRQ_COINT1A             0x0400	/* conter 1A overflow interrupt mask */
-#define IRQ_COINT1B             0x0800	/* conter 1B overflow interrupt mask */
-#define IRQ_COINT2A             0x1000	/* conter 2A overflow interrupt mask */
-#define IRQ_COINT2B             0x2000	/* conter 2B overflow interrupt mask */
-#define IRQ_COINT3A             0x4000	/* conter 3A overflow interrupt mask */
-#define IRQ_COINT3B             0x8000	/* conter 3B overflow interrupt mask */
+#define S626_IRQ_COINT1A	0x0400	/* counter 1A overflow interrupt mask */
+#define S626_IRQ_COINT1B	0x0800	/* counter 1B overflow interrupt mask */
+#define S626_IRQ_COINT2A	0x1000	/* counter 2A overflow interrupt mask */
+#define S626_IRQ_COINT2B	0x2000	/* counter 2B overflow interrupt mask */
+#define S626_IRQ_COINT3A	0x4000	/* counter 3A overflow interrupt mask */
+#define S626_IRQ_COINT3B	0x8000	/* counter 3B overflow interrupt mask */
 
-/*  RPS command codes. */
-#define RPS_CLRSIGNAL		0x00000000	/*  CLEAR SIGNAL */
-#define RPS_SETSIGNAL		0x10000000	/*  SET SIGNAL */
-#define RPS_NOP			0x00000000	/*  NOP */
-#define RPS_PAUSE		0x20000000	/*  PAUSE */
-#define RPS_UPLOAD		0x40000000	/*  UPLOAD */
-#define RPS_JUMP		0x80000000	/*  JUMP */
-#define RPS_LDREG		0x90000100	/*  LDREG (1 uint32_t only) */
-#define RPS_STREG		0xA0000100	/*  STREG (1 uint32_t only) */
-#define RPS_STOP		0x50000000	/*  STOP */
-#define RPS_IRQ                 0x60000000	/*  IRQ */
+/* RPS command codes. */
+#define S626_RPS_CLRSIGNAL	0x00000000	/* CLEAR SIGNAL */
+#define S626_RPS_SETSIGNAL	0x10000000	/* SET SIGNAL */
+#define S626_RPS_NOP		0x00000000	/* NOP */
+#define S626_RPS_PAUSE		0x20000000	/* PAUSE */
+#define S626_RPS_UPLOAD		0x40000000	/* UPLOAD */
+#define S626_RPS_JUMP		0x80000000	/* JUMP */
+#define S626_RPS_LDREG		0x90000100	/* LDREG (1 uint32_t only) */
+#define S626_RPS_STREG		0xA0000100	/* STREG (1 uint32_t only) */
+#define S626_RPS_STOP		0x50000000	/* STOP */
+#define S626_RPS_IRQ		0x60000000	/* IRQ */
 
-#define RPS_LOGICAL_OR		0x08000000	/*  Logical OR conditionals. */
-#define RPS_INVERT		0x04000000	/*  Test for negated semaphores. */
-#define RPS_DEBI		0x00000002	/*  DEBI done */
+#define S626_RPS_LOGICAL_OR	0x08000000	/* Logical OR conditionals. */
+#define S626_RPS_INVERT		0x04000000	/* Test for negated
+						 * semaphores. */
+#define S626_RPS_DEBI		0x00000002	/* DEBI done */
 
-#define RPS_SIG0		0x00200000	/*  RPS semaphore 0 (used by ADC). */
-#define RPS_SIG1		0x00400000	/*  RPS semaphore 1 (used by DAC). */
-#define RPS_SIG2		0x00800000	/*  RPS semaphore 2 (not used). */
-#define RPS_GPIO2		0x00080000	/*  RPS GPIO2 */
-#define RPS_GPIO3		0x00100000	/*  RPS GPIO3 */
+#define S626_RPS_SIG0		0x00200000	/* RPS semaphore 0
+						 * (used by ADC). */
+#define S626_RPS_SIG1		0x00400000	/* RPS semaphore 1
+						 * (used by DAC). */
+#define S626_RPS_SIG2		0x00800000	/* RPS semaphore 2
+						 * (not used). */
+#define S626_RPS_GPIO2		0x00080000	/* RPS GPIO2 */
+#define S626_RPS_GPIO3		0x00100000	/* RPS GPIO3 */
 
-#define RPS_SIGADC		RPS_SIG0	/*  Trigger/status for ADC's RPS program. */
-#define RPS_SIGDAC		RPS_SIG1	/*  Trigger/status for DAC's RPS program. */
+#define S626_RPS_SIGADC		S626_RPS_SIG0	/* Trigger/status for
+						 * ADC's RPS program. */
+#define S626_RPS_SIGDAC		S626_RPS_SIG1	/* Trigger/status for
+						 * DAC's RPS program. */
 
-/*  RPS clock parameters. */
-#define RPSCLK_SCALAR		8	/*  This is apparent ratio of PCI/RPS clks (undocumented!!). */
-#define RPSCLK_PER_US		(33 / RPSCLK_SCALAR)	/*  Number of RPS clocks in one microsecond. */
+/* RPS clock parameters. */
+#define S626_RPSCLK_SCALAR	8	/* This is apparent ratio of
+					 * PCI/RPS clks (undocumented!!). */
+#define S626_RPSCLK_PER_US	(33 / S626_RPSCLK_SCALAR)
+					/* Number of RPS clocks in one
+					 * microsecond. */
 
-/*  Event counter source addresses. */
-#define SBA_RPS_A0		0x27	/*  Time of RPS0 busy, in PCI clocks. */
+/* Event counter source addresses. */
+#define S626_SBA_RPS_A0		0x27	/* Time of RPS0 busy, in PCI clocks. */
 
-/*  GPIO constants. */
-#define GPIO_BASE		0x10004000	/*  GPIO 0,2,3 = inputs, GPIO3 = IRQ; GPIO1 = out. */
-#define GPIO1_LO		0x00000000	/*  GPIO1 set to LOW. */
-#define GPIO1_HI		0x00001000	/*  GPIO1 set to HIGH. */
+/* GPIO constants. */
+#define S626_GPIO_BASE		0x10004000	/* GPIO 0,2,3 = inputs,
+						 * GPIO3 = IRQ; GPIO1 = out. */
+#define S626_GPIO1_LO		0x00000000	/* GPIO1 set to LOW. */
+#define S626_GPIO1_HI		0x00001000	/* GPIO1 set to HIGH. */
 
-/*  Primary Status Register (PSR) constants. */
-#define PSR_DEBI_E		0x00040000	/*  DEBI event flag. */
-#define PSR_DEBI_S		0x00080000	/*  DEBI status flag. */
-#define PSR_A2_IN		0x00008000	/*  Audio output DMA2 protection address reached. */
-#define PSR_AFOU		0x00000800	/*  Audio FIFO under/overflow detected. */
-#define PSR_GPIO2		0x00000020	/*  GPIO2 input pin: 0=AdcBusy, 1=AdcIdle. */
-#define PSR_EC0S		0x00000001	/*  Event counter 0 threshold reached. */
+/* Primary Status Register (PSR) constants. */
+#define S626_PSR_DEBI_E		0x00040000	/* DEBI event flag. */
+#define S626_PSR_DEBI_S		0x00080000	/* DEBI status flag. */
+#define S626_PSR_A2_IN		0x00008000	/* Audio output DMA2 protection
+						 * address reached. */
+#define S626_PSR_AFOU		0x00000800	/* Audio FIFO under/overflow
+						 * detected. */
+#define S626_PSR_GPIO2		0x00000020	/* GPIO2 input pin: 0=AdcBusy,
+						 * 1=AdcIdle. */
+#define S626_PSR_EC0S		0x00000001	/* Event counter 0 threshold
+						 * reached. */
 
-/*  Secondary Status Register (SSR) constants. */
-#define SSR_AF2_OUT		0x00000200	/*  Audio 2 output FIFO under/overflow detected. */
+/* Secondary Status Register (SSR) constants. */
+#define S626_SSR_AF2_OUT	0x00000200	/* Audio 2 output FIFO
+						 * under/overflow detected. */
 
-/*  Master Control Register 1 (MC1) constants. */
-#define MC1_SOFT_RESET		0x80000000	/*  Invoke 7146 soft reset. */
-#define MC1_SHUTDOWN		0x3FFF0000	/*  Shut down all MC1-controlled enables. */
+/* Master Control Register 1 (MC1) constants. */
+#define S626_MC1_SOFT_RESET	0x80000000	/* Invoke 7146 soft reset. */
+#define S626_MC1_SHUTDOWN	0x3FFF0000	/* Shut down all MC1-controlled
+						 * enables. */
 
-#define MC1_ERPS1		0x2000	/*  enab/disable RPS task 1. */
-#define MC1_ERPS0		0x1000	/*  enab/disable RPS task 0. */
-#define MC1_DEBI		0x0800	/*  enab/disable DEBI pins. */
-#define MC1_AUDIO		0x0200	/*  enab/disable audio port pins. */
-#define MC1_I2C			0x0100	/*  enab/disable I2C interface. */
-#define MC1_A2OUT		0x0008	/*  enab/disable transfer on A2 out. */
-#define MC1_A2IN		0x0004	/*  enab/disable transfer on A2 in. */
-#define MC1_A1IN		0x0001	/*  enab/disable transfer on A1 in. */
+#define S626_MC1_ERPS1		0x2000	/* Enab/disable RPS task 1. */
+#define S626_MC1_ERPS0		0x1000	/* Enab/disable RPS task 0. */
+#define S626_MC1_DEBI		0x0800	/* Enab/disable DEBI pins. */
+#define S626_MC1_AUDIO		0x0200	/* Enab/disable audio port pins. */
+#define S626_MC1_I2C		0x0100	/* Enab/disable I2C interface. */
+#define S626_MC1_A2OUT		0x0008	/* Enab/disable transfer on A2 out. */
+#define S626_MC1_A2IN		0x0004	/* Enab/disable transfer on A2 in. */
+#define S626_MC1_A1IN		0x0001	/* Enab/disable transfer on A1 in. */
 
-/*  Master Control Register 2 (MC2) constants. */
-#define MC2_UPLD_DEBIq		0x00020002	/*  Upload DEBI registers. */
-#define MC2_UPLD_IICq		0x00010001	/*  Upload I2C registers. */
-#define MC2_RPSSIG2_ONq		0x20002000	/*  Assert RPS_SIG2. */
-#define MC2_RPSSIG1_ONq		0x10001000	/*  Assert RPS_SIG1. */
-#define MC2_RPSSIG0_ONq		0x08000800	/*  Assert RPS_SIG0. */
-#define MC2_UPLD_DEBI_MASKq	0x00000002	/*  Upload DEBI mask. */
-#define MC2_UPLD_IIC_MASKq	0x00000001	/*  Upload I2C mask. */
-#define MC2_RPSSIG2_MASKq	0x00002000	/*  RPS_SIG2 bit mask. */
-#define MC2_RPSSIG1_MASKq	0x00001000	/*  RPS_SIG1 bit mask. */
-#define MC2_RPSSIG0_MASKq	0x00000800	/*  RPS_SIG0 bit mask. */
+/* Master Control Register 2 (MC2) constants. */
+#define S626_MC2_UPLD_DEBI	0x0002	/* Upload DEBI. */
+#define S626_MC2_UPLD_IIC	0x0001	/* Upload I2C. */
+#define S626_MC2_RPSSIG2	0x2000	/* RPS signal 2 (not used). */
+#define S626_MC2_RPSSIG1	0x1000	/* RPS signal 1 (DAC RPS busy). */
+#define S626_MC2_RPSSIG0	0x0800	/* RPS signal 0 (ADC RPS busy). */
 
-#define MC2_DELAYTRIG_4USq	MC2_RPSSIG1_ON
-#define MC2_DELAYBUSY_4USq	MC2_RPSSIG1_MASK
+#define S626_MC2_ADC_RPS	S626_MC2_RPSSIG0	/* ADC RPS busy. */
+#define S626_MC2_DAC_RPS	S626_MC2_RPSSIG1	/* DAC RPS busy. */
 
-#define	MC2_DELAYTRIG_6USq	MC2_RPSSIG2_ON
-#define MC2_DELAYBUSY_6USq	MC2_RPSSIG2_MASK
-
-#define MC2_UPLD_DEBI		0x0002	/*  Upload DEBI. */
-#define MC2_UPLD_IIC		0x0001	/*  Upload I2C. */
-#define MC2_RPSSIG2		0x2000	/*  RPS signal 2 (not used). */
-#define MC2_RPSSIG1		0x1000	/*  RPS signal 1 (DAC RPS busy). */
-#define MC2_RPSSIG0		0x0800	/*  RPS signal 0 (ADC RPS busy). */
-
-#define MC2_ADC_RPS		MC2_RPSSIG0	/*  ADC RPS busy. */
-#define MC2_DAC_RPS		MC2_RPSSIG1	/*  DAC RPS busy. */
-
-/* ***** oldies ***** */
-#define MC2_UPLD_DEBIQ		0x00020002	/*  Upload DEBI registers. */
-#define MC2_UPLD_IICQ		0x00010001	/*  Upload I2C registers. */
-
-/*  PCI BUS (SAA7146) REGISTER ADDRESS OFFSETS */
-#define P_PCI_BT_A		0x004C	/* Audio DMA burst/threshold control. */
-#define P_DEBICFG               0x007C	/* DEBI configuration. */
-#define P_DEBICMD               0x0080	/* DEBI command. */
-#define P_DEBIPAGE              0x0084	/* DEBI page. */
-#define P_DEBIAD                0x0088	/* DEBI target address. */
-#define P_I2CCTRL               0x008C	/* I2C control. */
-#define P_I2CSTAT               0x0090	/* I2C status. */
-#define P_BASEA2_IN		0x00AC	/* Audio input 2 base physical DMAbuf
+/* PCI BUS (SAA7146) REGISTER ADDRESS OFFSETS */
+#define S626_P_PCI_BT_A		0x004C	/* Audio DMA burst/threshold control. */
+#define S626_P_DEBICFG		0x007C	/* DEBI configuration. */
+#define S626_P_DEBICMD		0x0080	/* DEBI command. */
+#define S626_P_DEBIPAGE		0x0084	/* DEBI page. */
+#define S626_P_DEBIAD		0x0088	/* DEBI target address. */
+#define S626_P_I2CCTRL		0x008C	/* I2C control. */
+#define S626_P_I2CSTAT		0x0090	/* I2C status. */
+#define S626_P_BASEA2_IN	0x00AC	/* Audio input 2 base physical DMAbuf
 					 * address. */
-#define P_PROTA2_IN		0x00B0	/* Audio input 2 physical DMAbuf
+#define S626_P_PROTA2_IN	0x00B0	/* Audio input 2 physical DMAbuf
 					 * protection address. */
-#define P_PAGEA2_IN		0x00B4	/* Audio input 2 paging attributes. */
-#define P_BASEA2_OUT		0x00B8	/* Audio output 2 base physical DMAbuf
+#define S626_P_PAGEA2_IN	0x00B4	/* Audio input 2 paging attributes. */
+#define S626_P_BASEA2_OUT	0x00B8	/* Audio output 2 base physical DMAbuf
 					 * address. */
-#define P_PROTA2_OUT		0x00BC	/* Audio output 2 physical DMAbuf
+#define S626_P_PROTA2_OUT	0x00BC	/* Audio output 2 physical DMAbuf
 					 * protection address. */
-#define P_PAGEA2_OUT		0x00C0	/* Audio output 2 paging attributes. */
-#define P_RPSPAGE0              0x00C4	/* RPS0 page. */
-#define P_RPSPAGE1              0x00C8	/* RPS1 page. */
-#define P_RPS0_TOUT		0x00D4	/* RPS0 time-out. */
-#define P_RPS1_TOUT		0x00D8	/* RPS1 time-out. */
-#define P_IER                   0x00DC	/* Interrupt enable. */
-#define P_GPIO                  0x00E0	/* General-purpose I/O. */
-#define P_EC1SSR		0x00E4	/* Event counter set 1 source select. */
-#define P_ECT1R			0x00EC	/* Event counter threshold set 1. */
-#define P_ACON1                 0x00F4	/* Audio control 1. */
-#define P_ACON2                 0x00F8	/* Audio control 2. */
-#define P_MC1                   0x00FC	/* Master control 1. */
-#define P_MC2                   0x0100	/* Master control 2. */
-#define P_RPSADDR0              0x0104	/* RPS0 instruction pointer. */
-#define P_RPSADDR1              0x0108	/* RPS1 instruction pointer. */
-#define P_ISR                   0x010C	/* Interrupt status. */
-#define P_PSR                   0x0110	/* Primary status. */
-#define P_SSR                   0x0114	/* Secondary status. */
-#define P_EC1R			0x0118	/* Event counter set 1. */
-#define P_ADP4			0x0138	/* Logical audio DMA pointer of audio
+#define S626_P_PAGEA2_OUT	0x00C0	/* Audio output 2 paging attributes. */
+#define S626_P_RPSPAGE0		0x00C4	/* RPS0 page. */
+#define S626_P_RPSPAGE1		0x00C8	/* RPS1 page. */
+#define S626_P_RPS0_TOUT	0x00D4	/* RPS0 time-out. */
+#define S626_P_RPS1_TOUT	0x00D8	/* RPS1 time-out. */
+#define S626_P_IER		0x00DC	/* Interrupt enable. */
+#define S626_P_GPIO		0x00E0	/* General-purpose I/O. */
+#define S626_P_EC1SSR		0x00E4	/* Event counter set 1 source select. */
+#define S626_P_ECT1R		0x00EC	/* Event counter threshold set 1. */
+#define S626_P_ACON1		0x00F4	/* Audio control 1. */
+#define S626_P_ACON2		0x00F8	/* Audio control 2. */
+#define S626_P_MC1		0x00FC	/* Master control 1. */
+#define S626_P_MC2		0x0100	/* Master control 2. */
+#define S626_P_RPSADDR0		0x0104	/* RPS0 instruction pointer. */
+#define S626_P_RPSADDR1		0x0108	/* RPS1 instruction pointer. */
+#define S626_P_ISR		0x010C	/* Interrupt status. */
+#define S626_P_PSR		0x0110	/* Primary status. */
+#define S626_P_SSR		0x0114	/* Secondary status. */
+#define S626_P_EC1R		0x0118	/* Event counter set 1. */
+#define S626_P_ADP4		0x0138	/* Logical audio DMA pointer of audio
 					 * input FIFO A2_IN. */
-#define P_FB_BUFFER1            0x0144	/* Audio feedback buffer 1. */
-#define P_FB_BUFFER2            0x0148	/* Audio feedback buffer 2. */
-#define P_TSL1                  0x0180	/* Audio time slot list 1. */
-#define P_TSL2                  0x01C0	/* Audio time slot list 2. */
+#define S626_P_FB_BUFFER1	0x0144	/* Audio feedback buffer 1. */
+#define S626_P_FB_BUFFER2	0x0148	/* Audio feedback buffer 2. */
+#define S626_P_TSL1		0x0180	/* Audio time slot list 1. */
+#define S626_P_TSL2		0x01C0	/* Audio time slot list 2. */
 
-/*  LOCAL BUS (GATE ARRAY) REGISTER ADDRESS OFFSETS */
-/*  Analog I/O registers: */
-#define LP_DACPOL		0x0082	/*   Write DAC polarity. */
-#define LP_GSEL			0x0084	/*   Write ADC gain. */
-#define LP_ISEL			0x0086	/*   Write ADC channel select. */
+/* LOCAL BUS (GATE ARRAY) REGISTER ADDRESS OFFSETS */
+/* Analog I/O registers: */
+#define S626_LP_DACPOL		0x0082	/* Write DAC polarity. */
+#define S626_LP_GSEL		0x0084	/* Write ADC gain. */
+#define S626_LP_ISEL		0x0086	/* Write ADC channel select. */
 
 /* Digital I/O registers */
-#define LP_RDDIN(x)		(0x0040 + (x) * 0x10)	/* R: digital input */
-#define LP_WRINTSEL(x)		(0x0042 + (x) * 0x10)	/* W: int enable */
-#define LP_WREDGSEL(x)		(0x0044 + (x) * 0x10)	/* W: edge selection */
-#define LP_WRCAPSEL(x)		(0x0046 + (x) * 0x10)	/* W: capture enable */
-#define LP_RDCAPFLG(x)		(0x0048 + (x) * 0x10)	/* R: edges captured */
-#define LP_WRDOUT(x)		(0x0048 + (x) * 0x10)	/* W: digital output */
-#define LP_RDINTSEL(x)		(0x004a + (x) * 0x10)	/* R: int enable */
-#define LP_RDEDGSEL(x)		(0x004c + (x) * 0x10)	/* R: edge selection */
-#define LP_RDCAPSEL(x)		(0x004e + (x) * 0x10)	/* R: capture enable */
+#define S626_LP_RDDIN(x)	(0x0040 + (x) * 0x10)	/* R: digital input */
+#define S626_LP_WRINTSEL(x)	(0x0042 + (x) * 0x10)	/* W: int enable */
+#define S626_LP_WREDGSEL(x)	(0x0044 + (x) * 0x10)	/* W: edge selection */
+#define S626_LP_WRCAPSEL(x)	(0x0046 + (x) * 0x10)	/* W: capture enable */
+#define S626_LP_RDCAPFLG(x)	(0x0048 + (x) * 0x10)	/* R: edges captured */
+#define S626_LP_WRDOUT(x)	(0x0048 + (x) * 0x10)	/* W: digital output */
+#define S626_LP_RDINTSEL(x)	(0x004a + (x) * 0x10)	/* R: int enable */
+#define S626_LP_RDEDGSEL(x)	(0x004c + (x) * 0x10)	/* R: edge selection */
+#define S626_LP_RDCAPSEL(x)	(0x004e + (x) * 0x10)	/* R: capture enable */
 
-/*  Counter Registers (read/write): */
-#define LP_CR0A			0x0000	/*   0A setup register. */
-#define LP_CR0B			0x0002	/*   0B setup register. */
-#define LP_CR1A			0x0004	/*   1A setup register. */
-#define LP_CR1B			0x0006	/*   1B setup register. */
-#define LP_CR2A			0x0008	/*   2A setup register. */
-#define LP_CR2B			0x000A	/*   2B setup register. */
+/* Counter Registers (read/write): */
+#define S626_LP_CR0A		0x0000	/* 0A setup register. */
+#define S626_LP_CR0B		0x0002	/* 0B setup register. */
+#define S626_LP_CR1A		0x0004	/* 1A setup register. */
+#define S626_LP_CR1B		0x0006	/* 1B setup register. */
+#define S626_LP_CR2A		0x0008	/* 2A setup register. */
+#define S626_LP_CR2B		0x000A	/* 2B setup register. */
 
-/*  Counter PreLoad (write) and Latch (read) Registers: */
-#define	LP_CNTR0ALSW		0x000C	/*   0A lsw. */
-#define	LP_CNTR0AMSW		0x000E	/*   0A msw. */
-#define	LP_CNTR0BLSW		0x0010	/*   0B lsw. */
-#define	LP_CNTR0BMSW		0x0012	/*   0B msw. */
-#define	LP_CNTR1ALSW		0x0014	/*   1A lsw. */
-#define	LP_CNTR1AMSW		0x0016	/*   1A msw. */
-#define	LP_CNTR1BLSW		0x0018	/*   1B lsw. */
-#define	LP_CNTR1BMSW		0x001A	/*   1B msw. */
-#define	LP_CNTR2ALSW		0x001C	/*   2A lsw. */
-#define	LP_CNTR2AMSW		0x001E	/*   2A msw. */
-#define	LP_CNTR2BLSW		0x0020	/*   2B lsw. */
-#define	LP_CNTR2BMSW		0x0022	/*   2B msw. */
+/* Counter PreLoad (write) and Latch (read) Registers: */
+#define	S626_LP_CNTR0ALSW	0x000C	/* 0A lsw. */
+#define	S626_LP_CNTR0AMSW	0x000E	/* 0A msw. */
+#define	S626_LP_CNTR0BLSW	0x0010	/* 0B lsw. */
+#define	S626_LP_CNTR0BMSW	0x0012	/* 0B msw. */
+#define	S626_LP_CNTR1ALSW	0x0014	/* 1A lsw. */
+#define	S626_LP_CNTR1AMSW	0x0016	/* 1A msw. */
+#define	S626_LP_CNTR1BLSW	0x0018	/* 1B lsw. */
+#define	S626_LP_CNTR1BMSW	0x001A	/* 1B msw. */
+#define	S626_LP_CNTR2ALSW	0x001C	/* 2A lsw. */
+#define	S626_LP_CNTR2AMSW	0x001E	/* 2A msw. */
+#define	S626_LP_CNTR2BLSW	0x0020	/* 2B lsw. */
+#define	S626_LP_CNTR2BMSW	0x0022	/* 2B msw. */
 
-/*  Miscellaneous Registers (read/write): */
-#define LP_MISC1		0x0088	/*   Read/write Misc1. */
-#define LP_WRMISC2		0x0090	/*   Write Misc2. */
-#define LP_RDMISC2		0x0082	/*   Read Misc2. */
+/* Miscellaneous Registers (read/write): */
+#define S626_LP_MISC1		0x0088	/* Read/write Misc1. */
+#define S626_LP_WRMISC2		0x0090	/* Write Misc2. */
+#define S626_LP_RDMISC2		0x0082	/* Read Misc2. */
 
-/*  Bit masks for MISC1 register that are the same for reads and writes. */
-#define MISC1_WENABLE		0x8000	/* enab writes to MISC2 (except Clear
+/* Bit masks for MISC1 register that are the same for reads and writes. */
+#define S626_MISC1_WENABLE	0x8000	/* enab writes to MISC2 (except Clear
 					 * Watchdog bit). */
-#define MISC1_WDISABLE		0x0000	/* Disable writes to MISC2. */
-#define MISC1_EDCAP		0x1000	/* enab edge capture on DIO chans
-					 * specified by  LP_WRCAPSELx. */
-#define MISC1_NOEDCAP		0x0000	/* Disable edge capture on specified
+#define S626_MISC1_WDISABLE	0x0000	/* Disable writes to MISC2. */
+#define S626_MISC1_EDCAP	0x1000	/* Enable edge capture on DIO chans
+					 * specified by S626_LP_WRCAPSELx. */
+#define S626_MISC1_NOEDCAP	0x0000	/* Disable edge capture on specified
 					 * DIO chans. */
 
-/*  Bit masks for MISC1 register reads. */
-#define RDMISC1_WDTIMEOUT	0x4000	/*  Watchdog timer timed out. */
+/* Bit masks for MISC1 register reads. */
+#define S626_RDMISC1_WDTIMEOUT	0x4000	/* Watchdog timer timed out. */
 
-/*  Bit masks for MISC2 register writes. */
-#define WRMISC2_WDCLEAR		0x8000	/*  Reset watchdog timer to zero. */
-#define WRMISC2_CHARGE_ENABLE	0x4000	/*  enab battery trickle charging. */
+/* Bit masks for MISC2 register writes. */
+#define S626_WRMISC2_WDCLEAR	0x8000	/* Reset watchdog timer to zero. */
+#define S626_WRMISC2_CHARGE_ENABLE 0x4000 /* Enable battery trickle charging. */
 
-/*  Bit masks for MISC2 register that are the same for reads and writes. */
-#define MISC2_BATT_ENABLE	0x0008	/*  Backup battery enable. */
-#define MISC2_WDENABLE		0x0004	/*  Watchdog timer enable. */
-#define MISC2_WDPERIOD_MASK	0x0003	/*  Watchdog interval */
-						/*  select mask. */
+/* Bit masks for MISC2 register that are the same for reads and writes. */
+#define S626_MISC2_BATT_ENABLE	0x0008	/* Backup battery enable. */
+#define S626_MISC2_WDENABLE	0x0004	/* Watchdog timer enable. */
+#define S626_MISC2_WDPERIOD_MASK 0x0003	/* Watchdog interval select mask. */
 
-/*  Bit masks for ACON1 register. */
-#define A2_RUN			0x40000000	/*  Run A2 based on TSL2. */
-#define A1_RUN			0x20000000	/*  Run A1 based on TSL1. */
-#define A1_SWAP			0x00200000	/*  Use big-endian for A1. */
-#define A2_SWAP			0x00100000	/*  Use big-endian for A2. */
-#define WS_MODES		0x00019999	/*  WS0 = TSL1 trigger */
-						/*  input, WS1-WS4 = */
-						/*  CS* outputs. */
+/* Bit masks for ACON1 register. */
+#define S626_A2_RUN		0x40000000	/* Run A2 based on TSL2. */
+#define S626_A1_RUN		0x20000000	/* Run A1 based on TSL1. */
+#define S626_A1_SWAP		0x00200000	/* Use big-endian for A1. */
+#define S626_A2_SWAP		0x00100000	/* Use big-endian for A2. */
+#define S626_WS_MODES		0x00019999	/* WS0 = TSL1 trigger input,
+						 * WS1-WS4 = CS* outputs. */
 
-#if PLATFORM == INTEL		/* Base ACON1 config: always run A1 based
-				 * on TSL1. */
-#define ACON1_BASE		(WS_MODES | A1_RUN)
-#elif PLATFORM == MOTOROLA
-#define ACON1_BASE		(WS_MODES | A1_RUN | A1_SWAP | A2_SWAP)
+#if S626_PLATFORM == S626_INTEL		/* Base ACON1 config: always run
+					 * A1 based on TSL1. */
+#define S626_ACON1_BASE		(S626_WS_MODES | S626_A1_RUN)
+#elif S626_PLATFORM == S626_MOTOROLA
+#define S626_ACON1_BASE		\
+	(S626_WS_MODES | S626_A1_RUN | S626_A1_SWAP | S626_A2_SWAP)
 #endif
 
-#define ACON1_ADCSTART		ACON1_BASE	/* Start ADC: run A1
-						 *  based on TSL1. */
-#define ACON1_DACSTART		(ACON1_BASE | A2_RUN)
+#define S626_ACON1_ADCSTART	S626_ACON1_BASE	/* Start ADC: run A1
+						 * based on TSL1. */
+#define S626_ACON1_DACSTART	(S626_ACON1_BASE | S626_A2_RUN)
 /* Start transmit to DAC: run A2 based on TSL2. */
-#define ACON1_DACSTOP		ACON1_BASE	/*  Halt A2. */
+#define S626_ACON1_DACSTOP	S626_ACON1_BASE	/* Halt A2. */
 
-/*  Bit masks for ACON2 register. */
-#define A1_CLKSRC_BCLK1		0x00000000	/*  A1 bit rate = BCLK1 (ADC). */
-#define A2_CLKSRC_X1		0x00800000	/*  A2 bit rate = ACLK/1 (DACs). */
-#define A2_CLKSRC_X2		0x00C00000	/*  A2 bit rate = ACLK/2 (DACs). */
-#define A2_CLKSRC_X4		0x01400000	/*  A2 bit rate = ACLK/4 (DACs). */
-#define INVERT_BCLK2		0x00100000	/*  Invert BCLK2 (DACs). */
-#define BCLK2_OE		0x00040000	/*  enab BCLK2 (DACs). */
-#define ACON2_XORMASK		0x000C0000	/*  XOR mask for ACON2 */
-						/*  active-low bits. */
+/* Bit masks for ACON2 register. */
+#define S626_A1_CLKSRC_BCLK1	0x00000000	/* A1 bit rate = BCLK1 (ADC). */
+#define S626_A2_CLKSRC_X1	0x00800000	/* A2 bit rate = ACLK/1
+						 * (DACs). */
+#define S626_A2_CLKSRC_X2	0x00C00000	/* A2 bit rate = ACLK/2
+						 * (DACs). */
+#define S626_A2_CLKSRC_X4	0x01400000	/* A2 bit rate = ACLK/4
+						 * (DACs). */
+#define S626_INVERT_BCLK2	0x00100000	/* Invert BCLK2 (DACs). */
+#define S626_BCLK2_OE		0x00040000	/* Enable BCLK2 (DACs). */
+#define S626_ACON2_XORMASK	0x000C0000	/* XOR mask for ACON2
+						 * active-low bits. */
 
-#define ACON2_INIT		(ACON2_XORMASK ^ (A1_CLKSRC_BCLK1 | A2_CLKSRC_X2 | INVERT_BCLK2 | BCLK2_OE))
+#define S626_ACON2_INIT		(S626_ACON2_XORMASK ^ \
+				 (S626_A1_CLKSRC_BCLK1 | S626_A2_CLKSRC_X2 | \
+				  S626_INVERT_BCLK2 | S626_BCLK2_OE))
 
-/*  Bit masks for timeslot records. */
-#define WS1		     	0x40000000	/*  WS output to assert. */
-#define WS2		     	0x20000000
-#define WS3		     	0x10000000
-#define WS4		     	0x08000000
-#define RSD1			0x01000000	/* Shift A1 data in on SD1. */
-#define SDW_A1			0x00800000	/* Store rcv'd char at next
-						 * char slot of DWORD1 buffer. */
-#define SIB_A1			0x00400000	/* Store rcv'd char at next
+/* Bit masks for timeslot records. */
+#define S626_WS1		0x40000000	/* WS output to assert. */
+#define S626_WS2		0x20000000
+#define S626_WS3		0x10000000
+#define S626_WS4		0x08000000
+#define S626_RSD1		0x01000000	/* Shift A1 data in on SD1. */
+#define S626_SDW_A1		0x00800000	/* Store rcv'd char at next char
+						 * slot of DWORD1 buffer. */
+#define S626_SIB_A1		0x00400000	/* Store rcv'd char at next
 						 * char slot of FB1 buffer. */
-#define SF_A1			0x00200000	/* Write unsigned long
+#define S626_SF_A1		0x00200000	/* Write unsigned long
 						 * buffer to input FIFO. */
 
 /* Select parallel-to-serial converter's data source: */
-#define XFIFO_0			0x00000000	/*    Data fifo byte 0. */
-#define XFIFO_1			0x00000010	/*    Data fifo byte 1. */
-#define XFIFO_2			0x00000020	/*    Data fifo byte 2. */
-#define XFIFO_3			0x00000030	/*    Data fifo byte 3. */
-#define XFB0			0x00000040	/*    FB_BUFFER byte 0. */
-#define XFB1			0x00000050	/*    FB_BUFFER byte 1. */
-#define XFB2			0x00000060	/*    FB_BUFFER byte 2. */
-#define XFB3			0x00000070	/*    FB_BUFFER byte 3. */
-#define SIB_A2			0x00000200	/* Store next dword from A2's
-						 * input shifter to FB2 buffer. */
-#define SF_A2			0x00000100	/* Store next dword from A2's
+#define S626_XFIFO_0		0x00000000	/* Data fifo byte 0. */
+#define S626_XFIFO_1		0x00000010	/* Data fifo byte 1. */
+#define S626_XFIFO_2		0x00000020	/* Data fifo byte 2. */
+#define S626_XFIFO_3		0x00000030	/* Data fifo byte 3. */
+#define S626_XFB0		0x00000040	/* FB_BUFFER byte 0. */
+#define S626_XFB1		0x00000050	/* FB_BUFFER byte 1. */
+#define S626_XFB2		0x00000060	/* FB_BUFFER byte 2. */
+#define S626_XFB3		0x00000070	/* FB_BUFFER byte 3. */
+#define S626_SIB_A2		0x00000200	/* Store next dword from A2's
+						 * input shifter to FB2
+						 * buffer. */
+#define S626_SF_A2		0x00000100	/* Store next dword from A2's
 						 * input shifter to its input
 						 * fifo. */
-#define LF_A2			0x00000080	/* Load next dword from A2's
+#define S626_LF_A2		0x00000080	/* Load next dword from A2's
 						 * output fifo into its
 						 * output dword buffer. */
-#define XSD2			0x00000008	/*  Shift data out on SD2. */
-#define RSD3			0x00001800	/*  Shift data in on SD3. */
-#define RSD2			0x00001000	/*  Shift data in on SD2. */
-#define LOW_A2			0x00000002	/*  Drive last SD low */
-						/*  for 7 clks, then */
-						/*  tri-state. */
-#define EOS		     	0x00000001	/*  End of superframe. */
+#define S626_XSD2		0x00000008	/* Shift data out on SD2. */
+#define S626_RSD3		0x00001800	/* Shift data in on SD3. */
+#define S626_RSD2		0x00001000	/* Shift data in on SD2. */
+#define S626_LOW_A2		0x00000002	/* Drive last SD low for 7 clks,
+						 * then tri-state. */
+#define S626_EOS		0x00000001	/* End of superframe. */
 
-/*  I2C configuration constants. */
-#define I2C_CLKSEL		0x0400
-/* I2C bit rate = PCIclk/480 = 68.75 KHz. */
+/* I2C configuration constants. */
+#define S626_I2C_CLKSEL		0x0400		/* I2C bit rate =
+						 * PCIclk/480 = 68.75 KHz. */
+#define S626_I2C_BITRATE	68.75		/* I2C bus data bit rate
+						 * (determined by
+						 * S626_I2C_CLKSEL) in KHz. */
+#define S626_I2C_WRTIME		15.0		/* Worst case time, in msec,
+						 * for EEPROM internal write
+						 * op. */
 
-#define I2C_BITRATE		68.75
-/* I2C bus data bit rate (determined by I2C_CLKSEL) in KHz. */
+/* I2C manifest constants. */
 
-#define I2C_WRTIME		15.0
-/* Worst case time, in msec, for EEPROM internal write op. */
+/* Max retries to wait for EEPROM write. */
+#define S626_I2C_RETRIES	(S626_I2C_WRTIME * S626_I2C_BITRATE / 9.0)
+#define S626_I2C_ERR		0x0002	/* I2C control/status flag ERROR. */
+#define S626_I2C_BUSY		0x0001	/* I2C control/status flag BUSY. */
+#define S626_I2C_ABORT		0x0080	/* I2C status flag ABORT. */
+#define S626_I2C_ATTRSTART	0x3	/* I2C attribute START. */
+#define S626_I2C_ATTRCONT	0x2	/* I2C attribute CONT. */
+#define S626_I2C_ATTRSTOP	0x1	/* I2C attribute STOP. */
+#define S626_I2C_ATTRNOP	0x0	/* I2C attribute NOP. */
 
-/*  I2C manifest constants. */
+/* Code macros used for constructing I2C command bytes. */
+#define S626_I2C_B2(ATTR, VAL)	(((ATTR) << 6) | ((VAL) << 24))
+#define S626_I2C_B1(ATTR, VAL)	(((ATTR) << 4) | ((VAL) << 16))
+#define S626_I2C_B0(ATTR, VAL)	(((ATTR) << 2) | ((VAL) <<  8))
 
-/*  Max retries to wait for EEPROM write. */
-#define I2C_RETRIES		(I2C_WRTIME * I2C_BITRATE / 9.0)
-#define I2C_ERR			0x0002	/*  I2C control/status */
-						/*  flag ERROR. */
-#define I2C_BUSY		0x0001	/*  I2C control/status */
-						/*  flag BUSY. */
-#define I2C_ABORT		0x0080	/*  I2C status flag ABORT. */
-#define I2C_ATTRSTART		0x3	/*  I2C attribute START. */
-#define I2C_ATTRCONT		0x2	/*  I2C attribute CONT. */
-#define I2C_ATTRSTOP		0x1	/*  I2C attribute STOP. */
-#define I2C_ATTRNOP		0x0	/*  I2C attribute NOP. */
+/* DEBI command constants. */
+#define S626_DEBI_CMD_SIZE16	(2 << 17)	/* Transfer size is always
+						 * 2 bytes. */
+#define S626_DEBI_CMD_READ	0x00010000	/* Read operation. */
+#define S626_DEBI_CMD_WRITE	0x00000000	/* Write operation. */
 
-/*  I2C read command  | EEPROM address. */
-#define I2CR			(devpriv->I2CAdrs | 1)
+/* Read immediate 2 bytes. */
+#define S626_DEBI_CMD_RDWORD	(S626_DEBI_CMD_READ | S626_DEBI_CMD_SIZE16)
 
-/*  I2C write command | EEPROM address. */
-#define I2CW			(devpriv->I2CAdrs)
+/* Write immediate 2 bytes. */
+#define S626_DEBI_CMD_WRWORD	(S626_DEBI_CMD_WRITE | S626_DEBI_CMD_SIZE16)
 
-/*  Code macros used for constructing I2C command bytes. */
-#define I2C_B2(ATTR, VAL)	(((ATTR) << 6) | ((VAL) << 24))
-#define I2C_B1(ATTR, VAL)	(((ATTR) << 4) | ((VAL) << 16))
-#define I2C_B0(ATTR, VAL)	(((ATTR) << 2) | ((VAL) <<  8))
+/* DEBI configuration constants. */
+#define S626_DEBI_CFG_XIRQ_EN	0x80000000	/* Enable external interrupt
+						 * on GPIO3. */
+#define S626_DEBI_CFG_XRESUME	0x40000000	/* Resume block */
+						/* Transfer when XIRQ
+						 * deasserted. */
+#define S626_DEBI_CFG_TOQ	0x03C00000	/* Timeout (15 PCI cycles). */
+#define S626_DEBI_CFG_FAST	0x10000000	/* Fast mode enable. */
 
-/* oldest */
-#define P_DEBICFGq              0x007C	/*  DEBI configuration. */
-#define P_DEBICMDq              0x0080	/*  DEBI command. */
-#define P_DEBIPAGEq             0x0084	/*  DEBI page. */
-#define P_DEBIADq               0x0088	/*  DEBI target address. */
+/* 4-bit field that specifies DEBI timeout value in PCI clock cycles: */
+#define S626_DEBI_CFG_TOUT_BIT	22	/* Finish DEBI cycle after this many
+					 * clocks. */
 
-#define DEBI_CFG_TOQ		0x03C00000	/*  timeout (15 PCI cycles) */
-#define DEBI_CFG_FASTQ		0x10000000	/*  fast mode enable */
-#define DEBI_CFG_16Q		0x00080000	/*  16-bit access enable */
-#define DEBI_CFG_INCQ		0x00040000	/*  enable address increment */
-#define DEBI_CFG_TIMEROFFQ	0x00010000	/*  disable timer */
-#define DEBI_CMD_RDQ		0x00050000	/*  read immediate 2 bytes */
-#define DEBI_CMD_WRQ		0x00040000	/*  write immediate 2 bytes */
-#define DEBI_PAGE_DISABLEQ	0x00000000	/*  paging disable */
+/* 2-bit field that specifies Endian byte lane steering: */
+#define S626_DEBI_CFG_SWAP_NONE	0x00000000	/* Straight - don't swap any
+						 * bytes (Intel). */
+#define S626_DEBI_CFG_SWAP_2	0x00100000	/* 2-byte swap (Motorola). */
+#define S626_DEBI_CFG_SWAP_4	0x00200000	/* 4-byte swap. */
+#define S626_DEBI_CFG_SLAVE16	0x00080000	/* Slave is able to serve
+						 * 16-bit cycles. */
+#define S626_DEBI_CFG_INC	0x00040000	/* Enable address increment
+						 * for block transfers. */
+#define S626_DEBI_CFG_INTEL	0x00020000	/* Intel style local bus. */
+#define S626_DEBI_CFG_TIMEROFF	0x00010000	/* Disable timer. */
 
-/*  DEBI command constants. */
-#define DEBI_CMD_SIZE16		(2 << 17)	/*  Transfer size is */
-						/*  always 2 bytes. */
-#define DEBI_CMD_READ		0x00010000	/*  Read operation. */
-#define DEBI_CMD_WRITE		0x00000000	/*  Write operation. */
+#if S626_PLATFORM == S626_INTEL
 
-/*  Read immediate 2 bytes. */
-#define DEBI_CMD_RDWORD		(DEBI_CMD_READ  | DEBI_CMD_SIZE16)
+#define S626_DEBI_TOUT		7	/* Wait 7 PCI clocks (212 ns) before
+					 * polling RDY. */
 
-/*  Write immediate 2 bytes. */
-#define DEBI_CMD_WRWORD		(DEBI_CMD_WRITE | DEBI_CMD_SIZE16)
+/* Intel byte lane steering (pass through all byte lanes). */
+#define S626_DEBI_SWAP		S626_DEBI_CFG_SWAP_NONE
 
-/*  DEBI configuration constants. */
-#define DEBI_CFG_XIRQ_EN	0x80000000	/*  enab external */
-						/*  interrupt on GPIO3. */
-#define DEBI_CFG_XRESUME	0x40000000	/*  Resume block */
-						/*  transfer when XIRQ */
-						/*  deasserted. */
-#define DEBI_CFG_FAST		0x10000000	/*  Fast mode enable. */
+#elif S626_PLATFORM == S626_MOTOROLA
 
-/*  4-bit field that specifies DEBI timeout value in PCI clock cycles: */
-#define DEBI_CFG_TOUT_BIT	22	/*    Finish DEBI cycle after */
-					/*    this many clocks. */
+#define S626_DEBI_TOUT		15	/* Wait 15 PCI clocks (454 ns) maximum
+					 * before timing out. */
 
-/*  2-bit field that specifies Endian byte lane steering: */
-#define DEBI_CFG_SWAP_NONE	0x00000000	/*    Straight - don't */
-						/*    swap any bytes */
-						/*    (Intel). */
-#define DEBI_CFG_SWAP_2		0x00100000	/*    2-byte swap (Motorola). */
-#define DEBI_CFG_SWAP_4		0x00200000	/*    4-byte swap. */
-#define DEBI_CFG_16		0x00080000	/*  Slave is able to */
-						/*  serve 16-bit */
-						/*  cycles. */
-
-#define DEBI_CFG_SLAVE16	0x00080000	/*  Slave is able to */
-						/*  serve 16-bit */
-						/*  cycles. */
-#define DEBI_CFG_INC		0x00040000	/*  enab address */
-						/*  increment for block */
-						/*  transfers. */
-#define DEBI_CFG_INTEL		0x00020000	/*  Intel style local bus. */
-#define DEBI_CFG_TIMEROFF	0x00010000	/*  Disable timer. */
-
-#if PLATFORM == INTEL
-
-#define DEBI_TOUT		7	/*  Wait 7 PCI clocks */
-						/*  (212 ns) before */
-						/*  polling RDY. */
-
-/*  Intel byte lane steering (pass through all byte lanes). */
-#define DEBI_SWAP		DEBI_CFG_SWAP_NONE
-
-#elif PLATFORM == MOTOROLA
-
-#define DEBI_TOUT		15	/*  Wait 15 PCI clocks (454 ns) */
-					/*  maximum before timing out. */
-#define DEBI_SWAP		DEBI_CFG_SWAP_2	/*  Motorola byte lane steering. */
+/* Motorola byte lane steering. */
+#define S626_DEBI_SWAP		S626_DEBI_CFG_SWAP_2
 
 #endif
 
-/*  DEBI page table constants. */
-#define DEBI_PAGE_DISABLE	0x00000000	/*  Paging disable. */
+/* DEBI page table constants. */
+#define S626_DEBI_PAGE_DISABLE	0x00000000	/* Paging disable. */
 
-/* ******* EXTRA FROM OTHER SANSORAY  * .h  ******* */
+/* ******* EXTRA FROM OTHER SENSORAY  * .h  ******* */
 
-/*  LoadSrc values: */
-#define LOADSRC_INDX		0	/*  Preload core in response to */
-					/*  Index. */
-#define LOADSRC_OVER		1	/*  Preload core in response to */
-					/*  Overflow. */
-#define LOADSRCB_OVERA		2	/*  Preload B core in response */
-					/*  to A Overflow. */
-#define LOADSRC_NONE		3	/*  Never preload core. */
+/* LoadSrc values: */
+#define S626_LOADSRC_INDX	0	/* Preload core in response to Index. */
+#define S626_LOADSRC_OVER	1	/* Preload core in response to
+					 * Overflow. */
+#define S626_LOADSRCB_OVERA	2	/* Preload B core in response to
+					 * A Overflow. */
+#define S626_LOADSRC_NONE	3	/* Never preload core. */
 
-/*  IntSrc values: */
-#define INTSRC_NONE 		0	/*  Interrupts disabled. */
-#define INTSRC_OVER 		1	/*  Interrupt on Overflow. */
-#define INTSRC_INDX 		2	/*  Interrupt on Index. */
-#define INTSRC_BOTH 		3	/*  Interrupt on Index or Overflow. */
+/* IntSrc values: */
+#define S626_INTSRC_NONE	0	/* Interrupts disabled. */
+#define S626_INTSRC_OVER	1	/* Interrupt on Overflow. */
+#define S626_INTSRC_INDX	2	/* Interrupt on Index. */
+#define S626_INTSRC_BOTH	3	/* Interrupt on Index or Overflow. */
 
-/*  LatchSrc values: */
-#define LATCHSRC_AB_READ	0	/*  Latch on read. */
-#define LATCHSRC_A_INDXA	1	/*  Latch A on A Index. */
-#define LATCHSRC_B_INDXB	2	/*  Latch B on B Index. */
-#define LATCHSRC_B_OVERA	3	/*  Latch B on A Overflow. */
+/* LatchSrc values: */
+#define S626_LATCHSRC_AB_READ	0	/* Latch on read. */
+#define S626_LATCHSRC_A_INDXA	1	/* Latch A on A Index. */
+#define S626_LATCHSRC_B_INDXB	2	/* Latch B on B Index. */
+#define S626_LATCHSRC_B_OVERA	3	/* Latch B on A Overflow. */
 
-/*  IndxSrc values: */
-#define INDXSRC_HARD		0	/*  Hardware or software index. */
-#define INDXSRC_SOFT		1	/*  Software index only. */
+/* IndxSrc values: */
+#define S626_INDXSRC_ENCODER	0	/* Encoder. */
+#define S626_INDXSRC_DIGIN	1	/* Digital inputs. */
+#define S626_INDXSRC_SOFT	2	/* S/w controlled by IndxPol bit. */
+#define S626_INDXSRC_DISABLED	3	/* Index disabled. */
 
-/*  IndxPol values: */
-#define INDXPOL_POS 		0	/*  Index input is active high. */
-#define INDXPOL_NEG 		1	/*  Index input is active low. */
+/* IndxPol values: */
+#define S626_INDXPOL_POS	0	/* Index input is active high. */
+#define S626_INDXPOL_NEG	1	/* Index input is active low. */
 
-/*  ClkSrc values: */
-#define CLKSRC_COUNTER		0	/*  Counter mode. */
-#define CLKSRC_TIMER		2	/*  Timer mode. */
-#define CLKSRC_EXTENDER		3	/*  Extender mode. */
+/* Logical encoder mode values: */
+#define S626_ENCMODE_COUNTER	0	/* Counter mode. */
+#define S626_ENCMODE_TIMER	2	/* Timer mode. */
+#define S626_ENCMODE_EXTENDER	3	/* Extender mode. */
 
-/*  ClkPol values: */
-#define CLKPOL_POS		0	/*  Counter/Extender clock is */
-					/*  active high. */
-#define CLKPOL_NEG		1	/*  Counter/Extender clock is */
-					/*  active low. */
-#define CNTDIR_UP		0	/*  Timer counts up. */
-#define CNTDIR_DOWN 		1	/*  Timer counts down. */
+/* Physical CntSrc values (for Counter A source and Counter B source): */
+#define S626_CNTSRC_ENCODER	0	/* Encoder */
+#define S626_CNTSRC_DIGIN	1	/* Digital inputs */
+#define S626_CNTSRC_SYSCLK	2	/* System clock up */
+#define S626_CNTSRC_SYSCLK_DOWN	3	/* System clock down */
 
-/*  ClkEnab values: */
-#define CLKENAB_ALWAYS		0	/*  Clock always enabled. */
-#define CLKENAB_INDEX		1	/*  Clock is enabled by index. */
+/* ClkPol values: */
+#define S626_CLKPOL_POS		0	/* Counter/Extender clock is
+					 * active high. */
+#define S626_CLKPOL_NEG		1	/* Counter/Extender clock is
+					 * active low. */
+#define S626_CNTDIR_UP		0	/* Timer counts up. */
+#define S626_CNTDIR_DOWN	1	/* Timer counts down. */
 
-/*  ClkMult values: */
-#define CLKMULT_4X 		0	/*  4x clock multiplier. */
-#define CLKMULT_2X 		1	/*  2x clock multiplier. */
-#define CLKMULT_1X 		2	/*  1x clock multiplier. */
+/* ClkEnab values: */
+#define S626_CLKENAB_ALWAYS	0	/* Clock always enabled. */
+#define S626_CLKENAB_INDEX	1	/* Clock is enabled by index. */
 
-/*  Bit Field positions in COUNTER_SETUP structure: */
-#define BF_LOADSRC		9	/*  Preload trigger. */
-#define BF_INDXSRC		7	/*  Index source. */
-#define BF_INDXPOL		6	/*  Index polarity. */
-#define BF_CLKSRC		4	/*  Clock source. */
-#define BF_CLKPOL		3	/*  Clock polarity/count direction. */
-#define BF_CLKMULT		1	/*  Clock multiplier. */
-#define BF_CLKENAB		0	/*  Clock enable. */
+/* ClkMult values: */
+#define S626_CLKMULT_4X		0	/* 4x clock multiplier. */
+#define S626_CLKMULT_2X		1	/* 2x clock multiplier. */
+#define S626_CLKMULT_1X		2	/* 1x clock multiplier. */
+#define S626_CLKMULT_SPECIAL	3	/* Special clock multiplier value. */
 
-/*  Enumerated counter operating modes specified by ClkSrc bit field in */
-/*  a COUNTER_SETUP. */
+/* Sanity-check limits for parameters. */
 
-#define CLKSRC_COUNTER		0	/*  Counter: ENC_C clock, ENC_D */
-					/*  direction. */
-#define CLKSRC_TIMER		2	/*  Timer: SYS_C clock, */
-					/*  direction specified by */
-					/*  ClkPol. */
-#define CLKSRC_EXTENDER		3	/*  Extender: OVR_A clock, */
-					/*  ENC_D direction. */
+#define S626_NUM_COUNTERS	6	/* Maximum valid counter
+					 * logical channel number. */
+#define S626_NUM_INTSOURCES	4
+#define S626_NUM_LATCHSOURCES	4
+#define S626_NUM_CLKMULTS	4
+#define S626_NUM_CLKSOURCES	4
+#define S626_NUM_CLKPOLS	2
+#define S626_NUM_INDEXPOLS	2
+#define S626_NUM_INDEXSOURCES	2
+#define S626_NUM_LOADTRIGS	4
 
-/*  Enumerated counter clock multipliers. */
+/* General macros for manipulating bitfields: */
+#define S626_MAKE(x, w, p)	(((x) & ((1 << (w)) - 1)) << (p))
+#define S626_UNMAKE(v, w, p)	(((v) >> (p)) & ((1 << (w)) - 1))
 
-#define MULT_X0			0x0003	/*  Supports no multipliers; */
-					/*  fixed physical multiplier = */
-					/*  3. */
-#define MULT_X1			0x0002	/*  Supports multiplier x1; */
-					/*  fixed physical multiplier = */
-					/*  2. */
-#define MULT_X2			0x0001	/*  Supports multipliers x1, */
-					/*  x2; physical multipliers = */
-					/*  1 or 2. */
-#define MULT_X4			0x0000	/*  Supports multipliers x1, */
-					/*  x2, x4; physical */
-					/*  multipliers = 0, 1 or 2. */
+/* Bit field positions in CRA: */
+#define S626_CRABIT_INDXSRC_B	14	/* B index source. */
+#define S626_CRABIT_CNTSRC_B	12	/* B counter source. */
+#define S626_CRABIT_INDXPOL_A	11	/* A index polarity. */
+#define S626_CRABIT_LOADSRC_A	 9	/* A preload trigger. */
+#define S626_CRABIT_CLKMULT_A	 7	/* A clock multiplier. */
+#define S626_CRABIT_INTSRC_A	 5	/* A interrupt source. */
+#define S626_CRABIT_CLKPOL_A	 4	/* A clock polarity. */
+#define S626_CRABIT_INDXSRC_A	 2	/* A index source. */
+#define S626_CRABIT_CNTSRC_A	 0	/* A counter source. */
 
-/*  Sanity-check limits for parameters. */
+/* Bit field widths in CRA: */
+#define S626_CRAWID_INDXSRC_B	2
+#define S626_CRAWID_CNTSRC_B	2
+#define S626_CRAWID_INDXPOL_A	1
+#define S626_CRAWID_LOADSRC_A	2
+#define S626_CRAWID_CLKMULT_A	2
+#define S626_CRAWID_INTSRC_A	2
+#define S626_CRAWID_CLKPOL_A	1
+#define S626_CRAWID_INDXSRC_A	2
+#define S626_CRAWID_CNTSRC_A	2
 
-#define NUM_COUNTERS		6	/*  Maximum valid counter */
-					/*  logical channel number. */
-#define NUM_INTSOURCES		4
-#define NUM_LATCHSOURCES	4
-#define NUM_CLKMULTS		4
-#define NUM_CLKSOURCES		4
-#define NUM_CLKPOLS		2
-#define NUM_INDEXPOLS		2
-#define NUM_INDEXSOURCES	2
-#define NUM_LOADTRIGS		4
+/* Bit field masks for CRA: */
+#define S626_CRAMSK_INDXSRC_B	S626_SET_CRA_INDXSRC_B(~0)
+#define S626_CRAMSK_CNTSRC_B	S626_SET_CRA_CNTSRC_B(~0)
+#define S626_CRAMSK_INDXPOL_A	S626_SET_CRA_INDXPOL_A(~0)
+#define S626_CRAMSK_LOADSRC_A	S626_SET_CRA_LOADSRC_A(~0)
+#define S626_CRAMSK_CLKMULT_A	S626_SET_CRA_CLKMULT_A(~0)
+#define S626_CRAMSK_INTSRC_A	S626_SET_CRA_INTSRC_A(~0)
+#define S626_CRAMSK_CLKPOL_A	S626_SET_CRA_CLKPOL_A(~0)
+#define S626_CRAMSK_INDXSRC_A	S626_SET_CRA_INDXSRC_A(~0)
+#define S626_CRAMSK_CNTSRC_A	S626_SET_CRA_CNTSRC_A(~0)
 
-/*  Bit field positions in CRA and CRB counter control registers. */
+/* Construct parts of the CRA value: */
+#define S626_SET_CRA_INDXSRC_B(x)	\
+	S626_MAKE((x), S626_CRAWID_INDXSRC_B, S626_CRABIT_INDXSRC_B)
+#define S626_SET_CRA_CNTSRC_B(x)	\
+	S626_MAKE((x), S626_CRAWID_CNTSRC_B, S626_CRABIT_CNTSRC_B)
+#define S626_SET_CRA_INDXPOL_A(x)	\
+	S626_MAKE((x), S626_CRAWID_INDXPOL_A, S626_CRABIT_INDXPOL_A)
+#define S626_SET_CRA_LOADSRC_A(x)	\
+	S626_MAKE((x), S626_CRAWID_LOADSRC_A, S626_CRABIT_LOADSRC_A)
+#define S626_SET_CRA_CLKMULT_A(x)	\
+	S626_MAKE((x), S626_CRAWID_CLKMULT_A, S626_CRABIT_CLKMULT_A)
+#define S626_SET_CRA_INTSRC_A(x)	\
+	S626_MAKE((x), S626_CRAWID_INTSRC_A, S626_CRABIT_INTSRC_A)
+#define S626_SET_CRA_CLKPOL_A(x)	\
+	S626_MAKE((x), S626_CRAWID_CLKPOL_A, S626_CRABIT_CLKPOL_A)
+#define S626_SET_CRA_INDXSRC_A(x)	\
+	S626_MAKE((x), S626_CRAWID_INDXSRC_A, S626_CRABIT_INDXSRC_A)
+#define S626_SET_CRA_CNTSRC_A(x)	\
+	S626_MAKE((x), S626_CRAWID_CNTSRC_A, S626_CRABIT_CNTSRC_A)
 
-/*  Bit field positions in CRA: */
-#define CRABIT_INDXSRC_B	14	/*    B index source. */
-#define CRABIT_CLKSRC_B		12	/*    B clock source. */
-#define CRABIT_INDXPOL_A	11	/*    A index polarity. */
-#define CRABIT_LOADSRC_A	 9	/*    A preload trigger. */
-#define CRABIT_CLKMULT_A	 7	/*    A clock multiplier. */
-#define CRABIT_INTSRC_A		 5	/*    A interrupt source. */
-#define CRABIT_CLKPOL_A		 4	/*    A clock polarity. */
-#define CRABIT_INDXSRC_A	 2	/*    A index source. */
-#define CRABIT_CLKSRC_A		 0	/*    A clock source. */
+/* Extract parts of the CRA value: */
+#define S626_GET_CRA_INDXSRC_B(v)	\
+	S626_UNMAKE((v), S626_CRAWID_INDXSRC_B, S626_CRABIT_INDXSRC_B)
+#define S626_GET_CRA_CNTSRC_B(v)	\
+	S626_UNMAKE((v), S626_CRAWID_CNTSRC_B, S626_CRABIT_CNTSRC_B)
+#define S626_GET_CRA_INDXPOL_A(v)	\
+	S626_UNMAKE((v), S626_CRAWID_INDXPOL_A, S626_CRABIT_INDXPOL_A)
+#define S626_GET_CRA_LOADSRC_A(v)	\
+	S626_UNMAKE((v), S626_CRAWID_LOADSRC_A, S626_CRABIT_LOADSRC_A)
+#define S626_GET_CRA_CLKMULT_A(v)	\
+	S626_UNMAKE((v), S626_CRAWID_CLKMULT_A, S626_CRABIT_CLKMULT_A)
+#define S626_GET_CRA_INTSRC_A(v)	\
+	S626_UNMAKE((v), S626_CRAWID_INTSRC_A, S626_CRABIT_INTSRC_A)
+#define S626_GET_CRA_CLKPOL_A(v)	\
+	S626_UNMAKE((v), S626_CRAWID_CLKPOL_A, S626_CRABIT_CLKPOL_A)
+#define S626_GET_CRA_INDXSRC_A(v)	\
+	S626_UNMAKE((v), S626_CRAWID_INDXSRC_A, S626_CRABIT_INDXSRC_A)
+#define S626_GET_CRA_CNTSRC_A(v)	\
+	S626_UNMAKE((v), S626_CRAWID_CNTSRC_A, S626_CRABIT_CNTSRC_A)
 
-/*  Bit field positions in CRB: */
-#define CRBBIT_INTRESETCMD	15	/*    Interrupt reset command. */
-#define CRBBIT_INTRESET_B	14	/*    B interrupt reset enable. */
-#define CRBBIT_INTRESET_A	13	/*    A interrupt reset enable. */
-#define CRBBIT_CLKENAB_A	12	/*    A clock enable. */
-#define CRBBIT_INTSRC_B		10	/*    B interrupt source. */
-#define CRBBIT_LATCHSRC		 8	/*    A/B latch source. */
-#define CRBBIT_LOADSRC_B	 6	/*    B preload trigger. */
-#define CRBBIT_CLKMULT_B	 3	/*    B clock multiplier. */
-#define CRBBIT_CLKENAB_B	 2	/*    B clock enable. */
-#define CRBBIT_INDXPOL_B	 1	/*    B index polarity. */
-#define CRBBIT_CLKPOL_B		 0	/*    B clock polarity. */
+/* Bit field positions in CRB: */
+#define S626_CRBBIT_INTRESETCMD	15	/* (w) Interrupt reset command. */
+#define S626_CRBBIT_CNTDIR_B	15	/* (r) B counter direction. */
+#define S626_CRBBIT_INTRESET_B	14	/* (w) B interrupt reset enable. */
+#define S626_CRBBIT_OVERDO_A	14	/* (r) A overflow routed to dig. out. */
+#define S626_CRBBIT_INTRESET_A	13	/* (w) A interrupt reset enable. */
+#define S626_CRBBIT_OVERDO_B	13	/* (r) B overflow routed to dig. out. */
+#define S626_CRBBIT_CLKENAB_A	12	/* A clock enable. */
+#define S626_CRBBIT_INTSRC_B	10	/* B interrupt source. */
+#define S626_CRBBIT_LATCHSRC	 8	/* A/B latch source. */
+#define S626_CRBBIT_LOADSRC_B	 6	/* B preload trigger. */
+#define S626_CRBBIT_CLEAR_B	 7	/* B cleared when A overflows. */
+#define S626_CRBBIT_CLKMULT_B	 3	/* B clock multiplier. */
+#define S626_CRBBIT_CLKENAB_B	 2	/* B clock enable. */
+#define S626_CRBBIT_INDXPOL_B	 1	/* B index polarity. */
+#define S626_CRBBIT_CLKPOL_B	 0	/* B clock polarity. */
 
-/*  Bit field masks for CRA and CRB. */
+/* Bit field widths in CRB: */
+#define S626_CRBWID_INTRESETCMD	1
+#define S626_CRBWID_CNTDIR_B	1
+#define S626_CRBWID_INTRESET_B	1
+#define S626_CRBWID_OVERDO_A	1
+#define S626_CRBWID_INTRESET_A	1
+#define S626_CRBWID_OVERDO_B	1
+#define S626_CRBWID_CLKENAB_A	1
+#define S626_CRBWID_INTSRC_B	2
+#define S626_CRBWID_LATCHSRC	2
+#define S626_CRBWID_LOADSRC_B	2
+#define S626_CRBWID_CLEAR_B	1
+#define S626_CRBWID_CLKMULT_B	2
+#define S626_CRBWID_CLKENAB_B	1
+#define S626_CRBWID_INDXPOL_B	1
+#define S626_CRBWID_CLKPOL_B	1
 
-#define CRAMSK_INDXSRC_B	(3 << CRABIT_INDXSRC_B)
-#define CRAMSK_CLKSRC_B		(3 << CRABIT_CLKSRC_B)
-#define CRAMSK_INDXPOL_A	(1 << CRABIT_INDXPOL_A)
-#define CRAMSK_LOADSRC_A	(3 << CRABIT_LOADSRC_A)
-#define CRAMSK_CLKMULT_A	(3 << CRABIT_CLKMULT_A)
-#define CRAMSK_INTSRC_A		(3 << CRABIT_INTSRC_A)
-#define CRAMSK_CLKPOL_A		(3 << CRABIT_CLKPOL_A)
-#define CRAMSK_INDXSRC_A	(3 << CRABIT_INDXSRC_A)
-#define CRAMSK_CLKSRC_A		(3 << CRABIT_CLKSRC_A)
+/* Bit field masks for CRB: */
+#define S626_CRBMSK_INTRESETCMD	S626_SET_CRB_INTRESETCMD(~0)	/* (w) */
+#define S626_CRBMSK_CNTDIR_B	S626_CRBMSK_INTRESETCMD		/* (r) */
+#define S626_CRBMSK_INTRESET_B	S626_SET_CRB_INTRESET_B(~0)	/* (w) */
+#define S626_CRBMSK_OVERDO_A	S626_CRBMSK_INTRESET_B		/* (r) */
+#define S626_CRBMSK_INTRESET_A	S626_SET_CRB_INTRESET_A(~0)	/* (w) */
+#define S626_CRBMSK_OVERDO_B	S626_CRBMSK_INTRESET_A		/* (r) */
+#define S626_CRBMSK_CLKENAB_A	S626_SET_CRB_CLKENAB_A(~0)
+#define S626_CRBMSK_INTSRC_B	S626_SET_CRB_INTSRC_B(~0)
+#define S626_CRBMSK_LATCHSRC	S626_SET_CRB_LATCHSRC(~0)
+#define S626_CRBMSK_LOADSRC_B	S626_SET_CRB_LOADSRC_B(~0)
+#define S626_CRBMSK_CLEAR_B	S626_SET_CRB_CLEAR_B(~0)
+#define S626_CRBMSK_CLKMULT_B	S626_SET_CRB_CLKMULT_B(~0)
+#define S626_CRBMSK_CLKENAB_B	S626_SET_CRB_CLKENAB_B(~0)
+#define S626_CRBMSK_INDXPOL_B	S626_SET_CRB_INDXPOL_B(~0)
+#define S626_CRBMSK_CLKPOL_B	S626_SET_CRB_CLKPOL_B(~0)
 
-#define CRBMSK_INTRESETCMD	(1 << CRBBIT_INTRESETCMD)
-#define CRBMSK_INTRESET_B	(1 << CRBBIT_INTRESET_B)
-#define CRBMSK_INTRESET_A	(1 << CRBBIT_INTRESET_A)
-#define CRBMSK_CLKENAB_A	(1 << CRBBIT_CLKENAB_A)
-#define CRBMSK_INTSRC_B		(3 << CRBBIT_INTSRC_B)
-#define CRBMSK_LATCHSRC		(3 << CRBBIT_LATCHSRC)
-#define CRBMSK_LOADSRC_B	(3 << CRBBIT_LOADSRC_B)
-#define CRBMSK_CLKMULT_B	(3 << CRBBIT_CLKMULT_B)
-#define CRBMSK_CLKENAB_B	(1 << CRBBIT_CLKENAB_B)
-#define CRBMSK_INDXPOL_B	(1 << CRBBIT_INDXPOL_B)
-#define CRBMSK_CLKPOL_B		(1 << CRBBIT_CLKPOL_B)
+/* Interrupt reset control bits. */
+#define S626_CRBMSK_INTCTRL	(S626_CRBMSK_INTRESETCMD | \
+				 S626_CRBMSK_INTRESET_A | \
+				 S626_CRBMSK_INTRESET_B)
 
-#define CRBMSK_INTCTRL		(CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A | CRBMSK_INTRESET_B)	/*  Interrupt reset control bits. */
+/* Construct parts of the CRB value: */
+#define S626_SET_CRB_INTRESETCMD(x)	\
+	S626_MAKE((x), S626_CRBWID_INTRESETCMD, S626_CRBBIT_INTRESETCMD)
+#define S626_SET_CRB_INTRESET_B(x)	\
+	S626_MAKE((x), S626_CRBWID_INTRESET_B, S626_CRBBIT_INTRESET_B)
+#define S626_SET_CRB_INTRESET_A(x)	\
+	S626_MAKE((x), S626_CRBWID_INTRESET_A, S626_CRBBIT_INTRESET_A)
+#define S626_SET_CRB_CLKENAB_A(x)	\
+	S626_MAKE((x), S626_CRBWID_CLKENAB_A, S626_CRBBIT_CLKENAB_A)
+#define S626_SET_CRB_INTSRC_B(x)	\
+	S626_MAKE((x), S626_CRBWID_INTSRC_B, S626_CRBBIT_INTSRC_B)
+#define S626_SET_CRB_LATCHSRC(x)	\
+	S626_MAKE((x), S626_CRBWID_LATCHSRC, S626_CRBBIT_LATCHSRC)
+#define S626_SET_CRB_LOADSRC_B(x)	\
+	S626_MAKE((x), S626_CRBWID_LOADSRC_B, S626_CRBBIT_LOADSRC_B)
+#define S626_SET_CRB_CLEAR_B(x)	\
+	S626_MAKE((x), S626_CRBWID_CLEAR_B, S626_CRBBIT_CLEAR_B)
+#define S626_SET_CRB_CLKMULT_B(x)	\
+	S626_MAKE((x), S626_CRBWID_CLKMULT_B, S626_CRBBIT_CLKMULT_B)
+#define S626_SET_CRB_CLKENAB_B(x)	\
+	S626_MAKE((x), S626_CRBWID_CLKENAB_B, S626_CRBBIT_CLKENAB_B)
+#define S626_SET_CRB_INDXPOL_B(x)	\
+	S626_MAKE((x), S626_CRBWID_INDXPOL_B, S626_CRBBIT_INDXPOL_B)
+#define S626_SET_CRB_CLKPOL_B(x)	\
+	S626_MAKE((x), S626_CRBWID_CLKPOL_B, S626_CRBBIT_CLKPOL_B)
 
-/*  Bit field positions for standardized SETUP structure. */
+/* Extract parts of the CRB value: */
+#define S626_GET_CRB_CNTDIR_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_CNTDIR_B, S626_CRBBIT_CNTDIR_B)
+#define S626_GET_CRB_OVERDO_A(v)	\
+	S626_UNMAKE((v), S626_CRBWID_OVERDO_A, S626_CRBBIT_OVERDO_A)
+#define S626_GET_CRB_OVERDO_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_OVERDO_B, S626_CRBBIT_OVERDO_B)
+#define S626_GET_CRB_CLKENAB_A(v)	\
+	S626_UNMAKE((v), S626_CRBWID_CLKENAB_A, S626_CRBBIT_CLKENAB_A)
+#define S626_GET_CRB_INTSRC_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_INTSRC_B, S626_CRBBIT_INTSRC_B)
+#define S626_GET_CRB_LATCHSRC(v)	\
+	S626_UNMAKE((v), S626_CRBWID_LATCHSRC, S626_CRBBIT_LATCHSRC)
+#define S626_GET_CRB_LOADSRC_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_LOADSRC_B, S626_CRBBIT_LOADSRC_B)
+#define S626_GET_CRB_CLEAR_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_CLEAR_B, S626_CRBBIT_CLEAR_B)
+#define S626_GET_CRB_CLKMULT_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_CLKMULT_B, S626_CRBBIT_CLKMULT_B)
+#define S626_GET_CRB_CLKENAB_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_CLKENAB_B, S626_CRBBIT_CLKENAB_B)
+#define S626_GET_CRB_INDXPOL_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_INDXPOL_B, S626_CRBBIT_INDXPOL_B)
+#define S626_GET_CRB_CLKPOL_B(v)	\
+	S626_UNMAKE((v), S626_CRBWID_CLKPOL_B, S626_CRBBIT_CLKPOL_B)
 
-#define STDBIT_INTSRC		13
-#define STDBIT_LATCHSRC		11
-#define STDBIT_LOADSRC		 9
-#define STDBIT_INDXSRC		 7
-#define STDBIT_INDXPOL		 6
-#define STDBIT_CLKSRC		 4
-#define STDBIT_CLKPOL		 3
-#define STDBIT_CLKMULT		 1
-#define STDBIT_CLKENAB		 0
+/* Bit field positions for standardized SETUP structure: */
+#define S626_STDBIT_INTSRC	13
+#define S626_STDBIT_LATCHSRC	11
+#define S626_STDBIT_LOADSRC	 9
+#define S626_STDBIT_INDXSRC	 7
+#define S626_STDBIT_INDXPOL	 6
+#define S626_STDBIT_ENCMODE	 4
+#define S626_STDBIT_CLKPOL	 3
+#define S626_STDBIT_CLKMULT	 1
+#define S626_STDBIT_CLKENAB	 0
 
-/*  Bit field masks for standardized SETUP structure. */
+/* Bit field widths for standardized SETUP structure: */
+#define S626_STDWID_INTSRC	2
+#define S626_STDWID_LATCHSRC	2
+#define S626_STDWID_LOADSRC	2
+#define S626_STDWID_INDXSRC	2
+#define S626_STDWID_INDXPOL	1
+#define S626_STDWID_ENCMODE	2
+#define S626_STDWID_CLKPOL	1
+#define S626_STDWID_CLKMULT	2
+#define S626_STDWID_CLKENAB	1
 
-#define STDMSK_INTSRC		(3 << STDBIT_INTSRC)
-#define STDMSK_LATCHSRC		(3 << STDBIT_LATCHSRC)
-#define STDMSK_LOADSRC		(3 << STDBIT_LOADSRC)
-#define STDMSK_INDXSRC		(1 << STDBIT_INDXSRC)
-#define STDMSK_INDXPOL		(1 << STDBIT_INDXPOL)
-#define STDMSK_CLKSRC		(3 << STDBIT_CLKSRC)
-#define STDMSK_CLKPOL		(1 << STDBIT_CLKPOL)
-#define STDMSK_CLKMULT		(3 << STDBIT_CLKMULT)
-#define STDMSK_CLKENAB		(1 << STDBIT_CLKENAB)
+/* Bit field masks for standardized SETUP structure: */
+#define S626_STDMSK_INTSRC	S626_SET_STD_INTSRC(~0)
+#define S626_STDMSK_LATCHSRC	S626_SET_STD_LATCHSRC(~0)
+#define S626_STDMSK_LOADSRC	S626_SET_STD_LOADSRC(~0)
+#define S626_STDMSK_INDXSRC	S626_SET_STD_INDXSRC(~0)
+#define S626_STDMSK_INDXPOL	S626_SET_STD_INDXPOL(~0)
+#define S626_STDMSK_ENCMODE	S626_SET_STD_ENCMODE(~0)
+#define S626_STDMSK_CLKPOL	S626_SET_STD_CLKPOL(~0)
+#define S626_STDMSK_CLKMULT	S626_SET_STD_CLKMULT(~0)
+#define S626_STDMSK_CLKENAB	S626_SET_STD_CLKENAB(~0)
 
-struct bufferDMA {
-	dma_addr_t PhysicalBase;
-	void *LogicalBase;
-	uint32_t DMAHandle;
-};
+/* Construct parts of standardized SETUP structure: */
+#define S626_SET_STD_INTSRC(x)	\
+	S626_MAKE((x), S626_STDWID_INTSRC, S626_STDBIT_INTSRC)
+#define S626_SET_STD_LATCHSRC(x)	\
+	S626_MAKE((x), S626_STDWID_LATCHSRC, S626_STDBIT_LATCHSRC)
+#define S626_SET_STD_LOADSRC(x)	\
+	S626_MAKE((x), S626_STDWID_LOADSRC, S626_STDBIT_LOADSRC)
+#define S626_SET_STD_INDXSRC(x)	\
+	S626_MAKE((x), S626_STDWID_INDXSRC, S626_STDBIT_INDXSRC)
+#define S626_SET_STD_INDXPOL(x)	\
+	S626_MAKE((x), S626_STDWID_INDXPOL, S626_STDBIT_INDXPOL)
+#define S626_SET_STD_ENCMODE(x)	\
+	S626_MAKE((x), S626_STDWID_ENCMODE, S626_STDBIT_ENCMODE)
+#define S626_SET_STD_CLKPOL(x)	\
+	S626_MAKE((x), S626_STDWID_CLKPOL, S626_STDBIT_CLKPOL)
+#define S626_SET_STD_CLKMULT(x)	\
+	S626_MAKE((x), S626_STDWID_CLKMULT, S626_STDBIT_CLKMULT)
+#define S626_SET_STD_CLKENAB(x)	\
+	S626_MAKE((x), S626_STDWID_CLKENAB, S626_STDBIT_CLKENAB)
+
+/* Extract parts of standardized SETUP structure: */
+#define S626_GET_STD_INTSRC(v)	\
+	S626_UNMAKE((v), S626_STDWID_INTSRC, S626_STDBIT_INTSRC)
+#define S626_GET_STD_LATCHSRC(v)	\
+	S626_UNMAKE((v), S626_STDWID_LATCHSRC, S626_STDBIT_LATCHSRC)
+#define S626_GET_STD_LOADSRC(v)	\
+	S626_UNMAKE((v), S626_STDWID_LOADSRC, S626_STDBIT_LOADSRC)
+#define S626_GET_STD_INDXSRC(v)	\
+	S626_UNMAKE((v), S626_STDWID_INDXSRC, S626_STDBIT_INDXSRC)
+#define S626_GET_STD_INDXPOL(v)	\
+	S626_UNMAKE((v), S626_STDWID_INDXPOL, S626_STDBIT_INDXPOL)
+#define S626_GET_STD_ENCMODE(v)	\
+	S626_UNMAKE((v), S626_STDWID_ENCMODE, S626_STDBIT_ENCMODE)
+#define S626_GET_STD_CLKPOL(v)	\
+	S626_UNMAKE((v), S626_STDWID_CLKPOL, S626_STDBIT_CLKPOL)
+#define S626_GET_STD_CLKMULT(v)	\
+	S626_UNMAKE((v), S626_STDWID_CLKMULT, S626_STDBIT_CLKMULT)
+#define S626_GET_STD_CLKENAB(v)	\
+	S626_UNMAKE((v), S626_STDWID_CLKENAB, S626_STDBIT_CLKENAB)
+
+#endif
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c
index 9e96495..daee2f4 100644
--- a/drivers/staging/comedi/drivers/skel.c
+++ b/drivers/staging/comedi/drivers/skel.c
@@ -332,30 +332,44 @@
 	return i;
 }
 
-/* DIO devices are slightly special.  Although it is possible to
+/*
+ * DIO devices are slightly special. Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
  * useful to applications if you implement the insn_bits interface.
- * This allows packed reading/writing of the DIO channels.  The
- * comedi core can convert between insn_bits and insn_read/write */
+ * This allows packed reading/writing of the DIO channels. The
+ * comedi core can convert between insn_bits and insn_read/write.
+ */
 static int skel_dio_insn_bits(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data)
+			      struct comedi_insn *insn,
+			      unsigned int *data)
 {
-	/* The insn data is a mask in data[0] and the new data
-	 * in data[1], each channel cooresponding to a bit. */
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
+	/*
+	 * The insn data is a mask in data[0] and the new data
+	 * in data[1], each channel cooresponding to a bit.
+	 *
+	 * The core provided comedi_dio_update_state() function can
+	 * be used to handle the internal state update to DIO subdevices
+	 * with <= 32 channels. This function will return '0' if the
+	 * state does not change or the mask of the channels that need
+	 * to be updated.
+	 */
+	if (comedi_dio_update_state(s, data)) {
 		/* Write out the new digital output lines */
-		/* outw(s->state,dev->iobase + SKEL_DIO); */
+		/* outw(s->state, dev->iobase + SKEL_DIO); */
 	}
 
-	/* on return, data[1] contains the value of the digital
-	 * input and output lines. */
-	/* data[1]=inw(dev->iobase + SKEL_DIO); */
-	/* or we could just return the software copy of the output values if
-	 * it was a purely digital output subdevice */
-	/* data[1]=s->state; */
+	/*
+	 * On return, data[1] contains the value of the digital
+	 * input and output lines.
+	 */
+	/* data[1] = inw(dev->iobase + SKEL_DIO); */
+
+	/*
+	 * Or we could just return the software copy of the output
+	 * values if it was a purely digital output subdevice.
+	 */
+	/* data[1] = s->state; */
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/ssv_dnp.c b/drivers/staging/comedi/drivers/ssv_dnp.c
index 11758a5..df22a78 100644
--- a/drivers/staging/comedi/drivers/ssv_dnp.c
+++ b/drivers/staging/comedi/drivers/ssv_dnp.c
@@ -46,51 +46,43 @@
 #define PCMR  0xa3		/* Port C Mode Register                      */
 #define PCDR  0xa7		/* Port C Data Register                      */
 
-/* ------------------------------------------------------------------------- */
-/* The insn_bits interface allows packed reading/writing of DIO channels.    */
-/* The comedi core can convert between insn_bits and insn_read/write, so you */
-/* are able to use these instructions as well.                               */
-/* ------------------------------------------------------------------------- */
-
 static int dnp_dio_insn_bits(struct comedi_device *dev,
 			     struct comedi_subdevice *s,
-			     struct comedi_insn *insn, unsigned int *data)
+			     struct comedi_insn *insn,
+			     unsigned int *data)
 {
-	/* The insn data is a mask in data[0] and the new data in data[1],   */
-	/* each channel cooresponding to a bit.                              */
+	unsigned int mask;
+	unsigned int val;
 
-	/* Ports A and B are straight forward: each bit corresponds to an    */
-	/* output pin with the same order. Port C is different: bits 0...3   */
-	/* correspond to bits 4...7 of the output register (PCDR).           */
+	/*
+	 * Ports A and B are straight forward: each bit corresponds to an
+	 * output pin with the same order. Port C is different: bits 0...3
+	 * correspond to bits 4...7 of the output register (PCDR).
+	 */
 
-	if (data[0]) {
-
+	mask = comedi_dio_update_state(s, data);
+	if (mask) {
 		outb(PADR, CSCIR);
-		outb((inb(CSCDR)
-		      & ~(u8) (data[0] & 0x0000FF))
-		     | (u8) (data[1] & 0x0000FF), CSCDR);
+		outb(s->state & 0xff, CSCDR);
 
 		outb(PBDR, CSCIR);
-		outb((inb(CSCDR)
-		      & ~(u8) ((data[0] & 0x00FF00) >> 8))
-		     | (u8) ((data[1] & 0x00FF00) >> 8), CSCDR);
+		outb((s->state >> 8) & 0xff, CSCDR);
 
 		outb(PCDR, CSCIR);
-		outb((inb(CSCDR)
-		      & ~(u8) ((data[0] & 0x0F0000) >> 12))
-		     | (u8) ((data[1] & 0x0F0000) >> 12), CSCDR);
+		val = inb(CSCDR) & 0x0f;
+		outb(((s->state >> 12) & 0xf0) | val, CSCDR);
 	}
 
-	/* on return, data[1] contains the value of the digital input lines. */
 	outb(PADR, CSCIR);
-	data[0] = inb(CSCDR);
+	val = inb(CSCDR);
 	outb(PBDR, CSCIR);
-	data[0] += inb(CSCDR) << 8;
+	val |= (inb(CSCDR) << 8);
 	outb(PCDR, CSCIR);
-	data[0] += ((inb(CSCDR) & 0xF0) << 12);
+	val |= ((inb(CSCDR) & 0xf0) << 12);
+
+	data[1] = val;
 
 	return insn->n;
-
 }
 
 static int dnp_dio_insn_config(struct comedi_device *dev,
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 701ad1a..da1d501 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -122,7 +122,7 @@
 #define PWM_DEFAULT_PERIOD ((long)(1E9/100))
 
 /* Size of one A/D value */
-#define SIZEADIN          ((sizeof(int16_t)))
+#define SIZEADIN          ((sizeof(uint16_t)))
 
 /*
  * Size of the input-buffer IN BYTES
@@ -134,7 +134,7 @@
 #define SIZEINSNBUF       16
 
 /* size of one value for the D/A converter: channel and value */
-#define SIZEDAOUT          ((sizeof(int8_t)+sizeof(int16_t)))
+#define SIZEDAOUT          ((sizeof(uint8_t)+sizeof(uint16_t)))
 
 /*
  * Size of the output-buffer in bytes
@@ -195,15 +195,15 @@
 	/* PWM period */
 	unsigned int pwm_period;
 	/* PWM internal delay for the GPIF in the FX2 */
-	int8_t pwm_delay;
+	uint8_t pwm_delay;
 	/* size of the PWM buffer which holds the bit pattern */
 	int pwm_buf_sz;
 	/* input buffer for the ISO-transfer */
-	int16_t *in_buf;
+	uint16_t *in_buf;
 	/* input buffer for single insn */
-	int16_t *insn_buf;
+	uint16_t *insn_buf;
 
-	int8_t ao_chanlist[USBDUX_NUM_AO_CHAN];
+	uint8_t ao_chanlist[USBDUX_NUM_AO_CHAN];
 	unsigned int ao_readback[USBDUX_NUM_AO_CHAN];
 
 	unsigned int high_speed:1;
@@ -225,7 +225,7 @@
 	/* interval in frames/uframes */
 	unsigned int ai_interval;
 	/* commands */
-	int8_t *dux_commands;
+	uint8_t *dux_commands;
 	struct semaphore sem;
 };
 
@@ -367,7 +367,7 @@
 	n = s->async->cmd.chanlist_len;
 	for (i = 0; i < n; i++) {
 		unsigned int range = CR_RANGE(s->async->cmd.chanlist[i]);
-		int16_t val = le16_to_cpu(devpriv->in_buf[i]);
+		uint16_t val = le16_to_cpu(devpriv->in_buf[i]);
 
 		/* bipolar data is two's-complement */
 		if (comedi_range_is_bipolar(s, range))
@@ -415,7 +415,7 @@
 	struct comedi_device *dev = urb->context;
 	struct comedi_subdevice *s = dev->write_subdev;
 	struct usbdux_private *devpriv = dev->private;
-	int8_t *datap;
+	uint8_t *datap;
 	int len;
 	int ret;
 	int i;
@@ -483,7 +483,7 @@
 		*datap++ = len;
 		for (i = 0; i < s->async->cmd.chanlist_len; i++) {
 			unsigned int chan = devpriv->ao_chanlist[i];
-			short val;
+			unsigned short val;
 
 			ret = comedi_buf_get(s->async, &val);
 			if (ret < 0) {
@@ -649,14 +649,15 @@
  * creates the ADC command for the MAX1271
  * range is the range value from comedi
  */
-static int8_t create_adc_command(unsigned int chan, int range)
+static uint8_t create_adc_command(unsigned int chan, unsigned int range)
 {
-	int8_t p = (range <= 1);
-	int8_t r = ((range % 2) == 0);
+	uint8_t p = (range <= 1);
+	uint8_t r = ((range % 2) == 0);
+
 	return (chan << 4) | ((p == 1) << 2) | ((r == 1) << 3);
 }
 
-static int send_dux_commands(struct comedi_device *dev, int cmd_type)
+static int send_dux_commands(struct comedi_device *dev, unsigned int cmd_type)
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct usbdux_private *devpriv = dev->private;
@@ -669,7 +670,7 @@
 			    &nsent, BULK_TIMEOUT);
 }
 
-static int receive_dux_commands(struct comedi_device *dev, int command)
+static int receive_dux_commands(struct comedi_device *dev, unsigned int command)
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct usbdux_private *devpriv = dev->private;
@@ -879,7 +880,7 @@
 	struct usbdux_private *devpriv = dev->private;
 	unsigned int chan = CR_CHAN(insn->chanspec);
 	unsigned int val = devpriv->ao_readback[chan];
-	int16_t *p = (int16_t *)&devpriv->dux_commands[2];
+	uint16_t *p = (uint16_t *)&devpriv->dux_commands[2];
 	int ret = -EBUSY;
 	int i;
 
@@ -1133,15 +1134,13 @@
 {
 
 	struct usbdux_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 	int ret;
 
 	down(&devpriv->sem);
 
-	s->state &= ~mask;
-	s->state |= (bits & mask);
+	comedi_dio_update_state(s, data);
 
+	/* Always update the hardware. See the (*insn_config). */
 	devpriv->dux_commands[1] = s->io_bits;
 	devpriv->dux_commands[2] = s->state;
 
@@ -1200,7 +1199,7 @@
 {
 	struct usbdux_private *devpriv = dev->private;
 	unsigned int chan = CR_CHAN(insn->chanspec);
-	int16_t *p = (int16_t *)&devpriv->dux_commands[2];
+	uint16_t *p = (uint16_t *)&devpriv->dux_commands[2];
 	int ret = 0;
 	int i;
 
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index c47f408..a5363de 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -78,7 +78,7 @@
 #define USBDUXSIGMA_NUM_AO_CHAN		4
 
 /* Size of one A/D value */
-#define SIZEADIN          ((sizeof(int32_t)))
+#define SIZEADIN          ((sizeof(uint32_t)))
 
 /*
  * Size of the async input-buffer IN BYTES, the DIO state is transmitted
@@ -93,7 +93,7 @@
 #define NUMOUTCHANNELS    8
 
 /* size of one value for the D/A converter: channel and value */
-#define SIZEDAOUT          ((sizeof(uint8_t)+sizeof(int16_t)))
+#define SIZEDAOUT          ((sizeof(uint8_t)+sizeof(uint16_t)))
 
 /*
  * Size of the output-buffer in bytes
@@ -157,11 +157,11 @@
 	/* size of the PWM buffer which holds the bit pattern */
 	int pwm_buf_sz;
 	/* input buffer for the ISO-transfer */
-	int32_t *in_buf;
+	uint32_t *in_buf;
 	/* input buffer for single insn */
-	int8_t *insn_buf;
+	uint8_t *insn_buf;
 
-	int8_t ao_chanlist[USBDUXSIGMA_NUM_AO_CHAN];
+	uint8_t ao_chanlist[USBDUXSIGMA_NUM_AO_CHAN];
 	unsigned int ao_readback[USBDUXSIGMA_NUM_AO_CHAN];
 
 	unsigned high_speed:1;
@@ -224,7 +224,7 @@
 	struct usbduxsigma_private *devpriv = dev->private;
 	struct comedi_subdevice *s = dev->read_subdev;
 	unsigned int dio_state;
-	int32_t val;
+	uint32_t val;
 	int ret;
 	int i;
 
@@ -421,7 +421,7 @@
 		*datap++ = len;
 		for (i = 0; i < len; i++) {
 			unsigned int chan = devpriv->ao_chanlist[i];
-			short val;
+			unsigned short val;
 
 			ret = comedi_buf_get(s->async, &val);
 			if (ret < 0) {
@@ -784,7 +784,7 @@
 	}
 
 	for (i = 0; i < insn->n; i++) {
-		int32_t val;
+		uint32_t val;
 
 		ret = usbduxsigma_receive_cmd(dev, USBDUXSIGMA_SINGLE_AD_CMD);
 		if (ret < 0) {
@@ -793,7 +793,7 @@
 		}
 
 		/* 32 bits big endian from the A/D converter */
-		val = be32_to_cpu(*((int32_t *)((devpriv->insn_buf) + 1)));
+		val = be32_to_cpu(*((uint32_t *)((devpriv->insn_buf) + 1)));
 		val &= 0x00ffffff;	/* strip status byte */
 		val ^= 0x00800000;	/* convert to unsigned */
 
@@ -1059,15 +1059,13 @@
 				     unsigned int *data)
 {
 	struct usbduxsigma_private *devpriv = dev->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
 	int ret;
 
 	down(&devpriv->sem);
 
-	s->state &= ~mask;
-	s->state |= (bits & mask);
+	comedi_dio_update_state(s, data);
 
+	/* Always update the hardware. See the (*insn_config). */
 	devpriv->dux_commands[1] = s->io_bits & 0xff;
 	devpriv->dux_commands[4] = s->state & 0xff;
 	devpriv->dux_commands[2] = (s->io_bits >> 8) & 0xff;
@@ -1360,7 +1358,7 @@
 		return ret;
 
 	/* 32 bits big endian from the A/D converter */
-	val = be32_to_cpu(*((int32_t *)((devpriv->insn_buf)+1)));
+	val = be32_to_cpu(*((uint32_t *)((devpriv->insn_buf)+1)));
 	val &= 0x00ffffff;	/* strip status byte */
 	val ^= 0x00800000;	/* convert to unsigned */
 
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 06efa16..933b01a 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -462,9 +462,10 @@
 				unsigned int *data)
 {
 	struct vmk80xx_private *devpriv = dev->private;
-	unsigned char *rx_buf, *tx_buf;
+	unsigned char *rx_buf = devpriv->usb_rx_buf;
+	unsigned char *tx_buf = devpriv->usb_tx_buf;
 	int reg, cmd;
-	int retval;
+	int ret;
 
 	if (devpriv->model == VMK8061_MODEL) {
 		reg = VMK8061_DO_REG;
@@ -476,37 +477,27 @@
 
 	down(&devpriv->limit_sem);
 
-	rx_buf = devpriv->usb_rx_buf;
-	tx_buf = devpriv->usb_tx_buf;
-
-	if (data[0]) {
-		tx_buf[reg] &= ~data[0];
-		tx_buf[reg] |= (data[0] & data[1]);
-
-		retval = vmk80xx_write_packet(dev, cmd);
-
-		if (retval)
+	if (comedi_dio_update_state(s, data)) {
+		tx_buf[reg] = s->state;
+		ret = vmk80xx_write_packet(dev, cmd);
+		if (ret)
 			goto out;
 	}
 
 	if (devpriv->model == VMK8061_MODEL) {
 		tx_buf[0] = VMK8061_CMD_RD_DO;
-
-		retval = vmk80xx_read_packet(dev);
-
-		if (!retval) {
-			data[1] = rx_buf[reg];
-			retval = 2;
-		}
+		ret = vmk80xx_read_packet(dev);
+		if (ret)
+			goto out;
+		data[1] = rx_buf[reg];
 	} else {
-		data[1] = tx_buf[reg];
-		retval = 2;
+		data[1] = s->state;
 	}
 
 out:
 	up(&devpriv->limit_sem);
 
-	return retval;
+	return ret ? ret : insn->n;
 }
 
 static int vmk80xx_cnt_insn_read(struct comedi_device *dev,
diff --git a/drivers/staging/cptm1217/clearpad_tm1217.c b/drivers/staging/cptm1217/clearpad_tm1217.c
index 42a5f5c..ca4c2c6 100644
--- a/drivers/staging/cptm1217/clearpad_tm1217.c
+++ b/drivers/staging/cptm1217/clearpad_tm1217.c
@@ -457,8 +457,6 @@
 	for (i = 0; i < TOUCH_SUPPORTED; i++) {
 		input_dev = input_allocate_device();
 		if (input_dev == NULL) {
-			dev_err(ts->dev,
-				"cp_tm1217:Input Device Struct alloc failed\n");
 			retval = -ENOMEM;
 			goto fail;
 		}
diff --git a/drivers/staging/crystalhd/crystalhd_hw.c b/drivers/staging/crystalhd/crystalhd_hw.c
index 5845e89..043bd49 100644
--- a/drivers/staging/crystalhd/crystalhd_hw.c
+++ b/drivers/staging/crystalhd/crystalhd_hw.c
@@ -1517,7 +1517,7 @@
 	uint32_t i, list_avail = 0;
 	enum BC_STATUS comp_sts = BC_STS_NO_DATA;
 	uint32_t y_err_sts, uv_err_sts, y_dn_sz = 0, uv_dn_sz = 0;
-	bool ret = 0;
+	bool ret = false;
 
 	if (!hw) {
 		BCMLOG_ERR("Invalid Arguments\n");
@@ -1852,7 +1852,7 @@
 {
 	uint32_t intr_sts = 0;
 	uint32_t deco_intr = 0;
-	bool rc = 0;
+	bool rc = false;
 
 	if (!adp || !hw->dev_started)
 		return rc;
@@ -1865,7 +1865,7 @@
 
 	if (intr_sts) {
 		/* let system know we processed interrupt..*/
-		rc = 1;
+		rc = true;
 		hw->stats.dev_interrupts++;
 	}
 
@@ -1886,7 +1886,7 @@
 		/* FIXME: jarod: No udelay? might this be
 		 the real reason mini pci-e cards were stalling out? */
 		bc_dec_reg_wr(adp, Stream2Host_Intr_Sts, 0);
-		rc = 1;
+		rc = true;
 	}
 
 	/* Rx interrupts */
diff --git a/drivers/staging/crystalhd/crystalhd_lnx.c b/drivers/staging/crystalhd/crystalhd_lnx.c
index b17fbf8..190b9b9 100644
--- a/drivers/staging/crystalhd/crystalhd_lnx.c
+++ b/drivers/staging/crystalhd/crystalhd_lnx.c
@@ -75,8 +75,9 @@
 	return 0;
 }
 
-struct crystalhd_ioctl_data *chd_dec_alloc_iodata(struct crystalhd_adp *adp,
-					 bool isr)
+static struct
+crystalhd_ioctl_data *chd_dec_alloc_iodata(struct crystalhd_adp *adp,
+					   bool isr)
 {
 	unsigned long flags = 0;
 	struct crystalhd_ioctl_data *temp;
@@ -96,8 +97,8 @@
 	return temp;
 }
 
-void chd_dec_free_iodata(struct crystalhd_adp *adp,
-			 struct crystalhd_ioctl_data *iodata, bool isr)
+static void chd_dec_free_iodata(struct crystalhd_adp *adp,
+				struct crystalhd_ioctl_data *iodata, bool isr)
 {
 	unsigned long flags = 0;
 
@@ -156,7 +157,7 @@
 	if (rc) {
 		BCMLOG_ERR("failed to pull add_cdata sz:%x ua_off:%x\n",
 			   io->add_cdata_sz, (unsigned int)ua_off);
-		kfree(io->add_cdata);
+		vfree(io->add_cdata);
 		io->add_cdata = NULL;
 		return -ENODATA;
 	}
@@ -627,7 +628,7 @@
 }
 
 #ifdef CONFIG_PM
-int chd_dec_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int chd_dec_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct crystalhd_adp *adp;
 	struct crystalhd_ioctl_data *temp;
@@ -661,7 +662,7 @@
 	return 0;
 }
 
-int chd_dec_pci_resume(struct pci_dev *pdev)
+static int chd_dec_pci_resume(struct pci_dev *pdev)
 {
 	struct crystalhd_adp *adp;
 	enum BC_STATUS sts = BC_STS_SUCCESS;
diff --git a/drivers/staging/cxt1e1/comet.c b/drivers/staging/cxt1e1/comet.c
index d71aea5..46a0d92 100644
--- a/drivers/staging/cxt1e1/comet.c
+++ b/drivers/staging/cxt1e1/comet.c
@@ -145,10 +145,8 @@
     /* Enable 8 out of 10 validation */
 	 /* t1RBOC enable(BOC:BitOriented Code) */
 	pci_write_32((u_int32_t *) &comet->t1_rboc_ena, 0x00);
-	if (isT1mode)
-	{
-
-	/* IBCD cfg: aka Inband Code Detection ** loopback code length set to */
+	if (isT1mode) {
+		/* IBCD cfg: aka Inband Code Detection ** loopback code length set to */
 		/* 6 bit down, 5 bit up (assert) */
 		pci_write_32((u_int32_t *) &comet->ibcd_cfg, 0x04);
 		/* line loopback activate pattern */
@@ -353,7 +351,7 @@
 	/* RLPS Configuration Status */
 	pci_write_32((u_int32_t *) &comet->rlps_cfgsts, 0x11);
 	if (isT1mode)
-		 /* ? */
+		/* ? */
 		pci_write_32((u_int32_t *) &comet->rlps_alos_thresh, 0x55);
 	else
 		/* ? */
@@ -452,7 +450,7 @@
 	volatile u_int32_t value;
 
 	for (ramaddr = 0; ramaddr < 256; ramaddr++) {
-	/*** the following lines are per Errata 7, 2.5 ***/
+		/*** the following lines are per Errata 7, 2.5 ***/
 		{
 		/* Set up for a read operation */
 		pci_write_32((u_int32_t *) &comet->rlps_eq_rwsel, 0x80);
diff --git a/drivers/staging/cxt1e1/comet.h b/drivers/staging/cxt1e1/comet.h
index e06da4a..03b9bb7 100644
--- a/drivers/staging/cxt1e1/comet.h
+++ b/drivers/staging/cxt1e1/comet.h
@@ -338,7 +338,7 @@
 
 #ifdef __KERNEL__
 extern void
-init_comet (void *, comet_t *, u_int32_t, int, u_int8_t);
+init_comet(void *, comet_t *, u_int32_t, int, u_int8_t);
 #endif
 
 #endif                          /* _INC_COMET_H_ */
diff --git a/drivers/staging/cxt1e1/hwprobe.c b/drivers/staging/cxt1e1/hwprobe.c
index 53e9237..02b4f8f 100644
--- a/drivers/staging/cxt1e1/hwprobe.c
+++ b/drivers/staging/cxt1e1/hwprobe.c
@@ -157,7 +157,7 @@
         hi->pci_slot = 0xff;
         hi->pci_pin[0] = 0;
         hi->pci_pin[1] = 0;
-        hi->ndev = 0;
+        hi->ndev = NULL;
         hi->addr[0] = 0L;
         hi->addr[1] = 0L;
         hi->addr_mapped[0] = 0L;
@@ -309,7 +309,7 @@
     if (!found)
     {
         pr_warning("No boards found\n");
-        return ENODEV;
+        return -ENODEV;
     }
     /* sanity check for consistent hardware found */
     for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
@@ -318,7 +318,7 @@
         {
             pr_warning("%s: something very wrong with pci_get_device\n",
                        hi->devname);
-            return EIO;
+            return -EIO;
         }
     }
     /* bring board's memory regions on/line */
@@ -328,12 +328,12 @@
             break;
         for (j = 0; j < 2; j++)
         {
-            if (request_mem_region (hi->addr[j], hi->len[j], hi->devname) == 0)
+	    if (!request_mem_region (hi->addr[j], hi->len[j], hi->devname))
             {
                 pr_warning("%s: memory in use, addr=0x%lx, len=0x%lx ?\n",
                            hi->devname, hi->addr[j], hi->len[j]);
                 cleanup_ioremap ();
-                return ENOMEM;
+                return -ENOMEM;
             }
             hi->addr_mapped[j] = (unsigned long) ioremap (hi->addr[j], hi->len[j]);
             if (!hi->addr_mapped[j])
@@ -341,7 +341,7 @@
                 pr_warning("%s: ioremap fails, addr=0x%lx, len=0x%lx ?\n",
                            hi->devname, hi->addr[j], hi->len[j]);
                 cleanup_ioremap ();
-                return ENOMEM;
+                return -ENOMEM;
             }
 #ifdef SBE_MAP_DEBUG
             pr_warning("%s: io remapped from phys %x to virt %x\n",
@@ -365,7 +365,7 @@
                        hi->devname, i, hi->pci_slot);
             cleanup_devs ();
             cleanup_ioremap ();
-            return EIO;
+            return -EIO;
         }
         pci_set_master (hi->pdev[0]);
         pci_set_master (hi->pdev[1]);
diff --git a/drivers/staging/cxt1e1/linux.c b/drivers/staging/cxt1e1/linux.c
index 142691c..9b48373 100644
--- a/drivers/staging/cxt1e1/linux.c
+++ b/drivers/staging/cxt1e1/linux.c
@@ -133,7 +133,7 @@
     mch_t      *ch;
 
     ch = c4_find_chan (channum);
-    return ch ? ch->user : 0;
+    return ch ? ch->user : NULL;
 }
 
 
@@ -230,7 +230,7 @@
             __func__, name, pi->portnum); /* RLD DEBUG */
 #endif
     if (!(pi->wq_port = create_singlethread_workqueue (name)))
-        return ENOMEM;
+        return -ENOMEM;
     return 0;                       /* success */
 }
 
@@ -245,7 +245,7 @@
     {
         destroy_workqueue (pi->wq_port);        /* this also calls
                                                  * flush_workqueue() */
-        pi->wq_port = 0;
+        pi->wq_port = NULL;
     }
 }
 
@@ -420,7 +420,7 @@
     int         ret;
 
     if (c4_find_chan (cp->channum))
-        return 0;                   /* channel already exists */
+        return NULL;                   /* channel already exists */
 
     {
         struct c4_priv *priv;
@@ -430,14 +430,14 @@
         if (!priv)
         {
             pr_warning("%s: no memory for net_device !\n", ci->devname);
-            return 0;
+	    return NULL;
         }
         dev = alloc_hdlcdev (priv);
         if (!dev)
         {
             pr_warning("%s: no memory for hdlc_device !\n", ci->devname);
             OS_kfree (priv);
-            return 0;
+	    return NULL;
         }
         priv->ci = ci;
         priv->channum = cp->channum;
@@ -496,7 +496,7 @@
             pr_info("%s: create_chan[%d] registration error = %d.\n",
                     ci->devname, cp->channum, ret);
         free_netdev (dev);          /* cleanup */
-        return 0;                   /* failed to register */
+	return NULL;		/* failed to register */
     }
     return dev;
 }
@@ -744,7 +744,7 @@
         ch = c4_find_chan (channum);
         if (ch == NULL)
             return -ENOENT;
-        ch->user = 0;               /* will be freed, below */
+	ch->user = NULL;	/* will be freed, below */
     }
 
     if (lockit)
@@ -959,7 +959,7 @@
     {
         pr_warning("%s: no memory for struct net_device !\n", hi->devname);
         error_flag = ENOMEM;
-        return 0;
+	return NULL;
     }
     ci = (ci_t *)(netdev_priv(ndev));
     ndev->irq = irq0;
@@ -970,7 +970,7 @@
     c4_list = ci;
     ci->brdno = ci->next ? ci->next->brdno + 1 : 0;
 
-    if (CI == 0)
+    if (!CI)
         CI = ci;                    /* DEBUG, only board 0 usage */
 
     strcpy (ci->devname, hi->devname);
@@ -996,7 +996,7 @@
         OS_kfree (netdev_priv(ndev));
         OS_kfree (ndev);
         error_flag = ENODEV;
-        return 0;
+	return NULL;
     }
     /*************************************************************
      *  int request_irq(unsigned int irq,
@@ -1022,7 +1022,7 @@
         OS_kfree (netdev_priv(ndev));
         OS_kfree (ndev);
         error_flag = EIO;
-        return 0;
+	return NULL;
     }
 #ifdef CONFIG_SBE_PMCC4_NCOMM
     if (request_irq (irq1, &c4_ebus_interrupt, IRQF_SHARED, ndev->name, ndev))
@@ -1033,7 +1033,7 @@
         OS_kfree (netdev_priv(ndev));
         OS_kfree (ndev);
         error_flag = EIO;
-        return 0;
+	return NULL;
     }
 #endif
 
@@ -1091,7 +1091,7 @@
         free_irq (irq0, ndev);
         OS_kfree (netdev_priv(ndev));
         OS_kfree (ndev);
-        return 0;                   /* failure, error_flag is set */
+	return NULL;		/* failure, error_flag is set */
     }
     return ndev;
 }
diff --git a/drivers/staging/cxt1e1/musycc.c b/drivers/staging/cxt1e1/musycc.c
index 52b6d7f..0ba8c3a 100644
--- a/drivers/staging/cxt1e1/musycc.c
+++ b/drivers/staging/cxt1e1/musycc.c
@@ -745,8 +745,8 @@
 #define INT_QUEUE_BOUNDARY  4
 
     regaddr = OS_kmalloc((INT_QUEUE_SIZE + 1) * sizeof(u_int32_t));
-    if (regaddr == 0)
-	return ENOMEM;
+    if (!regaddr)
+	return -ENOMEM;
     ci->iqd_p_saved = regaddr;      /* save orig value for free's usage */
     ci->iqd_p = (u_int32_t *) ((unsigned long) (regaddr + INT_QUEUE_BOUNDARY - 1) &
 			       (~(INT_QUEUE_BOUNDARY - 1)));    /* this calculates
@@ -766,13 +766,13 @@
 #define GROUP_BOUNDARY   0x800
 
 	regaddr = OS_kmalloc(sizeof(struct musycc_groupr) + GROUP_BOUNDARY);
-	if (regaddr == 0) {
+	if (!regaddr) {
 	    for (gchan = 0; gchan < i; gchan++) {
 		pi = &ci->port[gchan];
 		OS_kfree(pi->reg);
-		pi->reg = 0;
+		pi->reg = NULL;
 	    }
-	    return ENOMEM;
+	    return -ENOMEM;
 	}
 	pi->regram_saved = regaddr; /* save orig value for free's usage */
 	pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) &
@@ -839,12 +839,12 @@
     volatile u_int32_t status;
 
     ch = pi->chan[gchan];
-    if (ch == 0 || ch->state != UP) {
+    if (!ch || ch->state != UP) {
 	if (cxt1e1_log_level >= LOG_ERROR)
 	    pr_info("%s: intr: xmit EOM on uninitialized channel %d\n",
 		    pi->up->devname, gchan);
     }
-    if (ch == 0 || ch->mdt == 0)
+    if (!ch || !ch->mdt)
 	return;                     /* note: mdt==0 implies a malloc()
 				     * failure w/in chan_up() routine */
 
@@ -907,7 +907,7 @@
 	ch->txd_irq_srv = md->snext;
 
 	md->data = 0;
-	if (md->mem_token != 0)	{
+	if (md->mem_token)	{
 	    /* upcount channel */
 	    atomic_sub(OS_mem_token_tlen(md->mem_token), &ch->tx_pending);
 	    /* upcount card */
@@ -931,7 +931,7 @@
 #endif                              /*** CONFIG_SBE_WAN256T3_NCOMM ***/
 
 	    OS_mem_token_free_irq(md->mem_token);
-	    md->mem_token = 0;
+	    md->mem_token = NULL;
 	}
 	md->status = 0;
 #ifdef RLD_TXFULL_DEBUG
@@ -1012,13 +1012,13 @@
     u_int32_t   error;
 
     ch = pi->chan[gchan];
-    if (ch == 0 || ch->state != UP) {
+    if (!ch || ch->state != UP) {
 	if (cxt1e1_log_level > LOG_ERROR)
 	    pr_info("%s: intr: receive EOM on uninitialized channel %d\n",
 		    pi->up->devname, gchan);
 	return;
     }
-    if (ch->mdr == 0)
+    if (!ch->mdr)
 	return;                     /* can this happen ? */
 
     for (;;) {
@@ -1566,18 +1566,18 @@
     pi->regram->rmp[gchan] = 0;
     FLUSH_MEM_WRITE();
     for (i = 0; i < ch->txd_num; i++)
-	if (ch->mdt[i].mem_token != 0)
+	if (ch->mdt[i].mem_token)
 	    OS_mem_token_free(ch->mdt[i].mem_token);
 
     for (i = 0; i < ch->rxd_num; i++)
-	if (ch->mdr[i].mem_token != 0)
+	if (ch->mdr[i].mem_token)
 	    OS_mem_token_free(ch->mdr[i].mem_token);
 
     OS_kfree(ch->mdr);
-    ch->mdr = 0;
+    ch->mdr = NULL;
     ch->rxd_num = 0;
     OS_kfree(ch->mdt);
-    ch->mdt = 0;
+    ch->mdt = NULL;
     ch->txd_num = 0;
 
     musycc_update_timeslots(pi);
@@ -1746,7 +1746,7 @@
 #endif
 	    u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS));
 	}
-	md->mem_token = len ? 0 : mem_token;    /* Fill in mds on last
+	md->mem_token = len ? NULL : mem_token;    /* Fill in mds on last
 						 * segment, others set ZERO
 						 * so that entire token is
 						 * removed ONLY when ALL
diff --git a/drivers/staging/cxt1e1/pmcc4_drv.c b/drivers/staging/cxt1e1/pmcc4_drv.c
index 2383c60..4028ea1 100644
--- a/drivers/staging/cxt1e1/pmcc4_drv.c
+++ b/drivers/staging/cxt1e1/pmcc4_drv.c
@@ -70,7 +70,7 @@
 #endif
 
 int         drvr_state = SBE_DRVR_INIT;
-ci_t       *c4_list = 0;
+ci_t       *c4_list = NULL;
 ci_t       *CI;                 /* dummy pointer to board ZEROE's data -
                                  * DEBUG USAGE */
 
@@ -119,7 +119,7 @@
                         return ch;
                 }
             }
-    return 0;
+    return NULL;
 }
 
 
@@ -145,7 +145,7 @@
         pr_warning("failed CI malloc, size %u.\n",
                    (unsigned int) sizeof (ci_t));
 
-    if (CI == 0)
+    if (!CI)
         CI = ci;                    /* DEBUG, only board 0 usage */
     return ci;
 }
@@ -831,7 +831,7 @@
 {
     mpi_t      *pi;
     volatile u_int32_t *dph;    /* hardware implemented register */
-    u_int32_t  *dpr = 0;        /* RAM image of registers for group command
+    u_int32_t *dpr = NULL;	/* RAM image of registers for group command
                                  * usage */
     int         offset = mcp->offset % 0x800;   /* group relative address
                                                  * offset, mcp->portnum is
@@ -1060,7 +1060,7 @@
     }
 
     /* save off interface assignments which bound a board */
-    if (ci->first_if == 0)          /* first channel registered is assumed to
+    if (!ci->first_if)		/* first channel registered is assumed to
                                      * be the lowest channel */
     {
         ci->first_if = ci->last_if = user;
@@ -1392,7 +1392,7 @@
         md->status = HOST_TX_OWNED; /* Host owns TX descriptor ** CODING
                                      * NOTE: HOST_TX_OWNED = 0 so no need to
                                      * byteSwap */
-        md->mem_token = 0;
+        md->mem_token = NULL;
         md->data = 0;
         if (i == (txnum - 1))
         {
@@ -1448,10 +1448,10 @@
         OS_mem_token_free (ch->mdr[i].mem_token);
     }
     OS_kfree (ch->mdt);
-    ch->mdt = 0;
+    ch->mdt = NULL;
     ch->txd_num = 0;
     OS_kfree (ch->mdr);
-    ch->mdr = 0;
+    ch->mdr = NULL;
     ch->rxd_num = 0;
     ch->state = DOWN;
     return ENOBUFS;
diff --git a/drivers/staging/cxt1e1/sbecom_inline_linux.h b/drivers/staging/cxt1e1/sbecom_inline_linux.h
index 3c6d1c0..ba3ff3e 100644
--- a/drivers/staging/cxt1e1/sbecom_inline_linux.h
+++ b/drivers/staging/cxt1e1/sbecom_inline_linux.h
@@ -73,7 +73,7 @@
     if (!skb)
     {
         //pr_warning("no mem in OS_mem_token_alloc !\n");
-        return 0;
+        return NULL;
     }
     return skb;
 }
@@ -103,7 +103,7 @@
 static inline void *
 OS_mem_token_next (void *token)
 {
-    return 0;
+    return NULL;
 }
 
 
diff --git a/drivers/staging/cxt1e1/sbecrc.c b/drivers/staging/cxt1e1/sbecrc.c
index 87512a5..81fa8a3 100644
--- a/drivers/staging/cxt1e1/sbecrc.c
+++ b/drivers/staging/cxt1e1/sbecrc.c
@@ -88,7 +88,7 @@
 	u_int32_t initialCrc,      /* starting CRC */
 	u_int32_t *result)
 {
-	u_int32_t     *tbl = 0;
+	u_int32_t     *tbl = NULL;
 	u_int32_t      temp1, temp2, crc;
 
 	/*
@@ -102,7 +102,7 @@
 		genCrcTable(tbl);
 #else
 		tbl = (u_int32_t *) OS_kmalloc(CRC_TABLE_ENTRIES * sizeof(u_int32_t));
-		if (tbl == 0) {
+		if (!tbl) {
 			*result = 0;   /* dummy up return value due to malloc
 					* failure */
 			return;
diff --git a/drivers/staging/cxt1e1/sbeid.c b/drivers/staging/cxt1e1/sbeid.c
index 791993f..6ec51bc 100644
--- a/drivers/staging/cxt1e1/sbeid.c
+++ b/drivers/staging/cxt1e1/sbeid.c
@@ -22,7 +22,7 @@
 char       *
 sbeid_get_bdname (ci_t *ci)
 {
-    char       *np = 0;
+    char       *np = NULL;
 
     switch (ci->brd_id)
     {
diff --git a/drivers/staging/cxt1e1/sbeproc.c b/drivers/staging/cxt1e1/sbeproc.c
index 9361dd8..353c001 100644
--- a/drivers/staging/cxt1e1/sbeproc.c
+++ b/drivers/staging/cxt1e1/sbeproc.c
@@ -44,7 +44,7 @@
 static void sbecom_proc_get_brdinfo(ci_t *ci, struct sbe_brd_info *bip)
 {
 	hdw_info_t *hi = &hdw_info[ci->brdno];
-	u_int8_t *bsn = 0;
+	u_int8_t *bsn = NULL;
 
 	switch (hi->promfmt)
 	{
diff --git a/drivers/staging/cxt1e1/sbew_ioc.h b/drivers/staging/cxt1e1/sbew_ioc.h
index ce9b15c..e1e5bfc 100644
--- a/drivers/staging/cxt1e1/sbew_ioc.h
+++ b/drivers/staging/cxt1e1/sbew_ioc.h
@@ -39,21 +39,21 @@
  */
 
 #define SBE_IOC_LOGLEVEL       _IOW(SBE_IOC_MAGIC, 0x00, int)
-#define SBE_IOC_CHAN_NEW       _IOW(SBE_IOC_MAGIC, 0x01,int)    /* unused */
-#define SBE_IOC_CHAN_UP        _IOW(SBE_IOC_MAGIC, 0x02,int)    /* unused */
-#define SBE_IOC_CHAN_DOWN      _IOW(SBE_IOC_MAGIC, 0x03,int)    /* unused */
-#define SBE_IOC_CHAN_GET       _IOWR(SBE_IOC_MAGIC,0x04, struct sbecom_chan_param)
+#define SBE_IOC_CHAN_NEW       _IOW(SBE_IOC_MAGIC, 0x01, int)    /* unused */
+#define SBE_IOC_CHAN_UP        _IOW(SBE_IOC_MAGIC, 0x02, int)    /* unused */
+#define SBE_IOC_CHAN_DOWN      _IOW(SBE_IOC_MAGIC, 0x03, int)    /* unused */
+#define SBE_IOC_CHAN_GET       _IOWR(SBE_IOC_MAGIC, 0x04, struct sbecom_chan_param)
 #define SBE_IOC_CHAN_SET       _IOW(SBE_IOC_MAGIC, 0x05, struct sbecom_chan_param)
-#define SBE_IOC_CHAN_GET_STAT  _IOWR(SBE_IOC_MAGIC,0x06, struct sbecom_chan_stats)
+#define SBE_IOC_CHAN_GET_STAT  _IOWR(SBE_IOC_MAGIC, 0x06, struct sbecom_chan_stats)
 #define SBE_IOC_CHAN_DEL_STAT  _IOW(SBE_IOC_MAGIC, 0x07, int)
 #define SBE_IOC_PORTS_ENABLE   _IOW(SBE_IOC_MAGIC, 0x0A, int)
-#define SBE_IOC_PORT_GET       _IOWR(SBE_IOC_MAGIC,0x0C, struct sbecom_port_param)
+#define SBE_IOC_PORT_GET       _IOWR(SBE_IOC_MAGIC, 0x0C, struct sbecom_port_param)
 #define SBE_IOC_PORT_SET       _IOW(SBE_IOC_MAGIC, 0x0D, struct sbecom_port_param)
-#define SBE_IOC_READ_VEC       _IOWR(SBE_IOC_MAGIC,0x10, struct sbecom_wrt_vec)
-#define SBE_IOC_WRITE_VEC      _IOWR(SBE_IOC_MAGIC,0x11, struct sbecom_wrt_vec)
+#define SBE_IOC_READ_VEC       _IOWR(SBE_IOC_MAGIC, 0x10, struct sbecom_wrt_vec)
+#define SBE_IOC_WRITE_VEC      _IOWR(SBE_IOC_MAGIC, 0x11, struct sbecom_wrt_vec)
 #define SBE_IOC_GET_SN         _IOR(SBE_IOC_MAGIC, 0x12, u_int32_t)
 #define SBE_IOC_RESET_DEV      _IOW(SBE_IOC_MAGIC, 0x13, int)
-#define SBE_IOC_FRAMER_GET     _IOWR(SBE_IOC_MAGIC,0x14, struct sbecom_framer_param)
+#define SBE_IOC_FRAMER_GET     _IOWR(SBE_IOC_MAGIC, 0x14, struct sbecom_framer_param)
 #define SBE_IOC_FRAMER_SET     _IOW(SBE_IOC_MAGIC, 0x15, struct sbecom_framer_param)
 #define SBE_IOC_CARD_GET       _IOR(SBE_IOC_MAGIC, 0x20, struct sbecom_card_param)
 #define SBE_IOC_CARD_SET       _IOW(SBE_IOC_MAGIC, 0x21, struct sbecom_card_param)
@@ -61,13 +61,13 @@
 #define SBE_IOC_CARD_DEL_STAT  _IO(SBE_IOC_MAGIC,  0x23)
 #define SBE_IOC_CARD_CHAN_STAT _IOR(SBE_IOC_MAGIC, 0x24, struct sbecom_chan_stats)
 #define SBE_IOC_CARD_BLINK     _IOW(SBE_IOC_MAGIC, 0x30, int)
-#define SBE_IOC_DRVINFO_GET    _IOWR(SBE_IOC_MAGIC,0x31, struct sbe_drv_info)
+#define SBE_IOC_DRVINFO_GET    _IOWR(SBE_IOC_MAGIC, 0x31, struct sbe_drv_info)
 #define SBE_IOC_BRDINFO_GET    _IOR(SBE_IOC_MAGIC, 0x32, struct sbe_brd_info)
-#define SBE_IOC_IID_GET        _IOWR(SBE_IOC_MAGIC,0x33, struct sbe_iid_info)
+#define SBE_IOC_IID_GET        _IOWR(SBE_IOC_MAGIC, 0x33, struct sbe_iid_info)
 #define SBE_IOC_BRDADDR_GET    _IOWR(SBE_IOC_MAGIC, 0x34, struct sbe_brd_addr)
 
 #ifdef NOT_YET_COMMON
-#define SBE_IOC_TSIOC_GET      _IOWR(SBE_IOC_MAGIC,0x16, struct wanc1t3_ts_param)
+#define SBE_IOC_TSIOC_GET      _IOWR(SBE_IOC_MAGIC, 0x16, struct wanc1t3_ts_param)
 #define SBE_IOC_TSIOC_SET      _IOW(SBE_IOC_MAGIC, 0x17, struct wanc1t3_ts_param)
 #endif
 
diff --git a/drivers/staging/dgap/Makefile b/drivers/staging/dgap/Makefile
index 9f1fce1..3abe8d2 100644
--- a/drivers/staging/dgap/Makefile
+++ b/drivers/staging/dgap/Makefile
@@ -1,5 +1,3 @@
-EXTRA_CFLAGS += -DDG_NAME=\"dgap-1.3-16\" -DDG_PART=\"40002347_C\"
-
 obj-$(CONFIG_DGAP) += dgap.o
 
 
diff --git a/drivers/staging/dgap/dgap_downld.h b/drivers/staging/dgap/dgap_downld.h
index f79e65c..271ac19 100644
--- a/drivers/staging/dgap/dgap_downld.h
+++ b/drivers/staging/dgap/dgap_downld.h
@@ -35,7 +35,7 @@
 struct fepimg {
     int type;				/* board type */
     int	len;				/* length of image */
-    char fepimage[1];			/* begining of image */
+    char fepimage[1];			/* beginning of image */
 };
 
 struct downldio {
diff --git a/drivers/staging/dgap/dgap_driver.c b/drivers/staging/dgap/dgap_driver.c
index 40ef785..4c1515e 100644
--- a/drivers/staging/dgap/dgap_driver.c
+++ b/drivers/staging/dgap/dgap_driver.c
@@ -32,16 +32,12 @@
 
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>	/* For udelay */
 #include <linux/slab.h>
 #include <asm/uaccess.h>	/* For copy_from_user/copy_to_user */
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
 #include <linux/sched.h>
-#endif
 
 #include "dgap_driver.h"
 #include "dgap_pci.h"
@@ -420,8 +416,7 @@
 		unregister_chrdev(DIGI_DGAP_MAJOR, "dgap");
 	}
 
-	if (dgap_config_buf)
-		kfree(dgap_config_buf);
+	kfree(dgap_config_buf);
 
 	for (i = 0; i < dgap_NumBoards; ++i) {
 		dgap_remove_ports_sysfiles(dgap_Board[i]);
@@ -488,10 +483,8 @@
 		}
 	}
 
-	if (brd->flipbuf)
-		kfree(brd->flipbuf);
-	if (brd->flipflagbuf)
-		kfree(brd->flipflagbuf);
+	kfree(brd->flipbuf);
+	kfree(brd->flipflagbuf);
 
 	dgap_Board[brd->boardnum] = NULL;
 
diff --git a/drivers/staging/dgap/dgap_driver.h b/drivers/staging/dgap/dgap_driver.h
index b1cf489..7d631e8 100644
--- a/drivers/staging/dgap/dgap_driver.h
+++ b/drivers/staging/dgap/dgap_driver.h
@@ -46,13 +46,16 @@
 /*
  * Driver identification, error and debugging statments
  *
- * In theory, you can change all occurances of "digi" in the next
+ * In theory, you can change all occurrences of "digi" in the next
  * three lines, and the driver printk's will all automagically change.
  *
  * APR((fmt, args, ...));	Always prints message
  * DPR((fmt, args, ...));	Only prints if DGAP_TRACER is defined at
  *				  compile time and dgap_debug!=0
  */
+#define	DG_NAME		"dgap-1.3-16"
+#define	DG_PART		"40002347_C"
+
 #define	PROCSTR		"dgap"			/* /proc entries	 */
 #define	DEVSTR		"/dev/dg/dgap"		/* /dev entries		 */
 #define	DRVSTR		"dgap"			/* Driver name string 
diff --git a/drivers/staging/dgap/dgap_fep5.c b/drivers/staging/dgap/dgap_fep5.c
index 4464f02..794cf9d 100644
--- a/drivers/staging/dgap/dgap_fep5.c
+++ b/drivers/staging/dgap/dgap_fep5.c
@@ -134,7 +134,7 @@
 		dgap_Board[i]->flipflagbuf = dgap_driver_kzmalloc(MYFLIPLEN, GFP_ATOMIC);
 	}
 
-	return (rc);
+	return rc;
 }
 
 
@@ -150,14 +150,14 @@
 	int n = U2BSIZE;
 
 	if (!brd || brd->magic != DGAP_BOARD_MAGIC)
-		return(-EFAULT);
+		return -EFAULT;
 
 	while (len) {
 		if (n > len)
 			n = len;
 
 		if (copy_from_user((char *) &buf, from_addr, n) == -1 ) {
-			return(-EFAULT);
+			return -EFAULT;
 		}
 
 		/* Copy data from buffer to card memory */
@@ -169,7 +169,7 @@
 		from_addr += n;   
 		n = U2BSIZE;
         }
-	return(0);
+	return 0;
 }
 
 
@@ -1155,20 +1155,20 @@
 	uint value = 0;
 
 	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) {
-		return (0);
+		return 0;
 	}
 
 	if (!ch->ch_bd || ch->ch_bd->magic != DGAP_BOARD_MAGIC) {
-		return (0);
+		return 0;
 	}
 
 	if (!(ch->ch_bd->bd_flags & BD_FEP5PLUS))
-		return (0);
+		return 0;
 
 	vaddr = ch->ch_bd->re_map_membase;
 
 	if (!vaddr)
-		return (0);
+		return 0;
 
 	/*
 	 * Go get from fep mem, what the fep
@@ -1178,7 +1178,7 @@
 		(ch->ch_portnum * 0x28) + LINE_SPEED));
 
 	value = readw(vaddr + offset);
-	return (value);
+	return value;
 }
 
 
@@ -1229,29 +1229,24 @@
 	uchar	mval;
 	uchar	hflow;
 
-	if (!tty || tty->magic != TTY_MAGIC) {
-		return (-ENXIO);
-	}
+	if (!tty || tty->magic != TTY_MAGIC)
+		return -ENXIO;
 
 	un = (struct un_t *) tty->driver_data;
-	if (!un || un->magic != DGAP_UNIT_MAGIC) {
-		return (-ENXIO);
-	}
+	if (!un || un->magic != DGAP_UNIT_MAGIC)
+		return -ENXIO;
 
 	ch = un->un_ch;
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) {
-		return (-ENXIO);
-	}
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+		return -ENXIO;
 
 	bd = ch->ch_bd;
-	if (!bd || bd->magic != DGAP_BOARD_MAGIC) {
-		return (-ENXIO);
-	}
+	if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+		return -ENXIO;
 
         bs = ch->ch_bs;
-	if (bs == 0) {
-		return (-ENXIO);
-	}
+	if (!bs)
+		return -ENXIO;
 
 	DPR_PARAM(("param start: tdev: %x cflags: %x oflags: %x iflags: %x\n",
 		ch->ch_tun.un_dev, ch->ch_c_cflag, ch->ch_c_oflag, ch->ch_c_iflag));
@@ -1558,7 +1553,7 @@
 
 	DPR_PARAM(("param finish\n"));
 
-	return (0);
+	return 0;
 }
 
 
@@ -1675,7 +1670,7 @@
 	int		b1;
 
 	if (!bd || bd->magic != DGAP_BOARD_MAGIC)
-		return (-ENXIO);
+		return -ENXIO;
 
 	DGAP_LOCK(bd->bd_lock, lock_flags);
 
@@ -1683,7 +1678,7 @@
 
 	if (!vaddr) {
 		DGAP_UNLOCK(bd->bd_lock, lock_flags);
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	eaddr = (struct ev_t *) (vaddr + EVBUF);
@@ -1701,7 +1696,7 @@
 		DPR_EVENT(("should be calling xxfail %d\n", __LINE__));
 		/* Let go of board lock */
 		DGAP_UNLOCK(bd->bd_lock, lock_flags);
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	/*
@@ -1949,5 +1944,5 @@
 	writew(tail, &(eaddr->ev_tail));
 	DGAP_UNLOCK(bd->bd_lock, lock_flags);
 
-	return (0);
+	return 0;
 }               
diff --git a/drivers/staging/dgap/dgap_fep5.h b/drivers/staging/dgap/dgap_fep5.h
index 3a12ba5..c9abc40 100644
--- a/drivers/staging/dgap/dgap_fep5.h
+++ b/drivers/staging/dgap/dgap_fep5.h
@@ -211,7 +211,7 @@
 #define SIFLAG		0xea		/* Set UNIX iflags		*/
 #define SFLOWC		0xeb		/* Set flow control characters	*/
 #define STLOW		0xec		/* Set transmit low water mark	*/
-#define RPAUSE		0xee		/* Pause recieve		*/
+#define RPAUSE		0xee		/* Pause receive		*/
 #define RRESUME		0xef		/* Resume receive		*/  
 #define CHRESET		0xf0		/* Reset Channel		*/
 #define BUFSETALL	0xf2		/* Set Tx & Rx buffer size avail*/
diff --git a/drivers/staging/dgap/dgap_kcompat.h b/drivers/staging/dgap/dgap_kcompat.h
index 8ebf4b7..0dc2404 100644
--- a/drivers/staging/dgap/dgap_kcompat.h
+++ b/drivers/staging/dgap/dgap_kcompat.h
@@ -28,11 +28,6 @@
 #ifndef __DGAP_KCOMPAT_H
 #define __DGAP_KCOMPAT_H
 
-# ifndef KERNEL_VERSION
-#  define KERNEL_VERSION(a,b,c)  (((a) << 16) + ((b) << 8) + (c))
-# endif
-
-
 #if !defined(TTY_FLIPBUF_SIZE)
 # define TTY_FLIPBUF_SIZE 512
 #endif
@@ -66,28 +61,4 @@
 		module_param(VAR, long, PERM); \
 		MODULE_PARM_DESC(VAR, DESC);
 
-
-
-
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
-
-
-
-
-/* NOTHING YET */
-
-
-
-
-# else
-
-
-
-# error "this driver does not support anything below the 2.6.27 kernel series."
-
-
-
-# endif
-
 #endif /* ! __DGAP_KCOMPAT_H */
diff --git a/drivers/staging/dgap/dgap_parse.c b/drivers/staging/dgap/dgap_parse.c
index 5497e6d..ff9d194 100644
--- a/drivers/staging/dgap/dgap_parse.c
+++ b/drivers/staging/dgap/dgap_parse.c
@@ -904,7 +904,7 @@
 /*
  * dgap_sindex: much like index(), but it looks for a match of any character in
  * the group, and returns that position.  If the first character is a ^, then
- * this will match the first occurence not in that group.
+ * this will match the first occurrence not in that group.
  */
 static char *dgap_sindex (char *string, char *group)
 {
@@ -1013,8 +1013,10 @@
 static struct cnode *dgap_newnode(int t)
 {
 	struct cnode *n;
-	if ( (n = (struct cnode *) kmalloc(sizeof(struct cnode ), GFP_ATOMIC) ) != NULL) {
-		memset( (char *)n, 0, sizeof(struct cnode ) );
+
+	n = kmalloc(sizeof(struct cnode), GFP_ATOMIC);
+	if (n != NULL) {
+		memset((char *)n, 0, sizeof(struct cnode));
 		n->type = t;
 	}
 	return(n);
@@ -1150,7 +1152,7 @@
 
 /*
  * Given a specific type of board, if found, detached link and 
- * returns the first occurance in the list.
+ * returns the first occurrence in the list.
  */
 struct cnode *dgap_find_config(int type, int bus, int slot)
 {
diff --git a/drivers/staging/dgap/dgap_sysfs.c b/drivers/staging/dgap/dgap_sysfs.c
index 94da06f..7f4ec9a 100644
--- a/drivers/staging/dgap/dgap_sysfs.c
+++ b/drivers/staging/dgap/dgap_sysfs.c
@@ -395,7 +395,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -420,7 +420,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -445,7 +445,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -479,7 +479,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -504,7 +504,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -529,7 +529,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -554,7 +554,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -579,7 +579,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -604,7 +604,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -629,7 +629,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
@@ -661,7 +661,7 @@
 
 	if (!d)
 		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGAP_UNIT_MAGIC)
 		return (0);
 	ch = un->un_ch;
diff --git a/drivers/staging/dgap/dgap_tty.c b/drivers/staging/dgap/dgap_tty.c
index b906db3..2a7a372 100644
--- a/drivers/staging/dgap/dgap_tty.c
+++ b/drivers/staging/dgap/dgap_tty.c
@@ -249,7 +249,7 @@
 
 	/*
 	 * If we're doing transparent print, we have to do all of the above
-	 * again, seperately so we don't get the LD confused about what major
+	 * again, separately so we don't get the LD confused about what major
 	 * we are when we get into the dgap_tty_open() routine.
 	 */
 	brd->PrintDriver = alloc_tty_driver(MAXPORTS);
@@ -497,10 +497,8 @@
  */
 void dgap_tty_post_uninit(void)
 {
-	if (dgap_TmpWriteBuf) {
-		kfree(dgap_TmpWriteBuf);
-		dgap_TmpWriteBuf = NULL;
-	}
+	kfree(dgap_TmpWriteBuf);
+	dgap_TmpWriteBuf = NULL;
 }
 
 
@@ -522,10 +520,8 @@
 			tty_unregister_device(brd->SerialDriver, i);
 		}
 		tty_unregister_driver(brd->SerialDriver);
-		if (brd->SerialDriver->ttys) {
-			kfree(brd->SerialDriver->ttys);
-			brd->SerialDriver->ttys = NULL;
-		}
+		kfree(brd->SerialDriver->ttys);
+		brd->SerialDriver->ttys = NULL;
 		put_tty_driver(brd->SerialDriver);
 		brd->dgap_Major_Serial_Registered = FALSE;
 	}
@@ -538,10 +534,8 @@
 			tty_unregister_device(brd->PrintDriver, i);
 		}
 		tty_unregister_driver(brd->PrintDriver);
-		if (brd->PrintDriver->ttys) {
-			kfree(brd->PrintDriver->ttys);
-			brd->PrintDriver->ttys = NULL;
-	        }
+		kfree(brd->PrintDriver->ttys);
+		brd->PrintDriver->ttys = NULL;
 		put_tty_driver(brd->PrintDriver);
 		brd->dgap_Major_TransparentPrint_Registered = FALSE;
 	}
@@ -601,7 +595,7 @@
 		/*
 		 *  Loop while data remains.
 		 */
-		while (nbuf > 0 && ch->ch_sniff_buf != 0) {
+		while (nbuf > 0 && ch->ch_sniff_buf) {
 			/*
 			 *  Determine the amount of available space left in the
 			 *  buffer.  If there's none, wait until some appears.
@@ -1069,7 +1063,7 @@
 
 	DGAP_LOCK(brd->bd_lock, lock_flags);
 
-	/* The wait above should guarentee this cannot happen */
+	/* The wait above should guarantee this cannot happen */
 	if (brd->state != BOARD_READY) {
 		DGAP_UNLOCK(brd->bd_lock, lock_flags);
 		return -ENXIO;
@@ -1113,9 +1107,10 @@
 		MAJOR(tty_devnum(tty)), MINOR(tty_devnum(tty)), un, brd->name));
 
 	/*
-	 * Error if channel info pointer is 0.
+	 * Error if channel info pointer is NULL.
 	 */
-	if ((bs = ch->ch_bs) == 0) {
+	bs = ch->ch_bs;
+	if (!bs) {
 		DGAP_UNLOCK(ch->ch_lock, lock_flags2);
 		DGAP_UNLOCK(brd->bd_lock, lock_flags);
 		DPR_OPEN(("%d BS is 0!\n", __LINE__));
@@ -3513,10 +3508,6 @@
 			return(-EINVAL);
 		}
 
-		DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-		DGAP_UNLOCK(bd->bd_lock, lock_flags);
-		return(-ENOIOCTLCMD);
-
 	case DIGI_GETA:
 		/* get information for ditty */
 		DGAP_UNLOCK(ch->ch_lock, lock_flags2);
@@ -3586,12 +3577,4 @@
 
 		return(-ENOIOCTLCMD);
 	}
-
-	DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-	DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
-	DPR_IOCTL(("dgap_tty_ioctl end - cmd %s (%x), arg %lx\n", 
-		dgap_ioctl_name(cmd), cmd, arg));
-                        
-	return(0);
 }
diff --git a/drivers/staging/dgap/digi.h b/drivers/staging/dgap/digi.h
index 651e2e5..bcea4f7 100644
--- a/drivers/staging/dgap/digi.h
+++ b/drivers/staging/dgap/digi.h
@@ -203,9 +203,9 @@
 	unsigned long	shrink_buf_vaddr;	/* Virtual address of board */
 	unsigned long	shrink_buf_phys;	/* Physical address of board */
 	unsigned long	shrink_buf_bseg;	/* Amount of board memory */
-	unsigned long	shrink_buf_hseg;	/* '186 Begining of Dual-Port */
+	unsigned long	shrink_buf_hseg;	/* '186 Beginning of Dual-Port */
 
-	unsigned long	shrink_buf_lseg;	/* '186 Begining of freed memory						*/ 
+	unsigned long	shrink_buf_lseg;	/* '186 Beginning of freed memory						*/ 
 	unsigned long	shrink_buf_mseg;	/* Linear address from start of
 						   dual-port were freed memory
 						   begins, host viewpoint. */
diff --git a/drivers/staging/dgap/downld.c b/drivers/staging/dgap/downld.c
index 57dfd6b..638c5da 100644
--- a/drivers/staging/dgap/downld.c
+++ b/drivers/staging/dgap/downld.c
@@ -52,7 +52,7 @@
 void		myperror();
 
 /*
-**  This structure is used to keep track of the diferent images available
+**  This structure is used to keep track of the different images available
 **  to give to the driver.  It is arranged so that the things that are
 **  constants or that have defaults are first inthe strucutre to simplify
 **  the table of initializers.
@@ -789,7 +789,7 @@
 /*
 ** myperror()
 **
-**  Same as normal perror(), but places the program name at the begining
+**  Same as normal perror(), but places the program name at the beginning
 **  of the message.
 */
 void myperror(char *s)
diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c
index 117e158..fdc1aab 100644
--- a/drivers/staging/dgnc/dgnc_cls.c
+++ b/drivers/staging/dgnc/dgnc_cls.c
@@ -33,7 +33,7 @@
 #include <linux/sched.h>	/* For jiffies, task states */
 #include <linux/interrupt.h>	/* For tasklet and interrupt structs/defines */
 #include <linux/delay.h>	/* For udelay */
-#include <asm/io.h>		/* For read[bwl]/write[bwl] */
+#include <linux/io.h>		/* For read[bwl]/write[bwl] */
 #include <linux/serial.h>	/* For struct async_serial */
 #include <linux/serial_reg.h>	/* For the various UART offsets */
 #include <linux/pci.h>
@@ -43,7 +43,7 @@
 #include "dgnc_tty.h"
 #include "dgnc_trace.h"
 
-static inline void cls_parse_isr(struct board_t *brd, uint port);
+static inline void cls_parse_isr(struct dgnc_board *brd, uint port);
 static inline void cls_clear_break(struct channel_t *ch, int force);
 static inline void cls_set_cts_flow_control(struct channel_t *ch);
 static inline void cls_set_rts_flow_control(struct channel_t *ch);
@@ -53,7 +53,7 @@
 static inline void cls_set_no_input_flow_control(struct channel_t *ch);
 static void cls_parse_modem(struct channel_t *ch, uchar signals);
 static void cls_tasklet(unsigned long data);
-static void cls_vpd(struct board_t *brd);
+static void cls_vpd(struct dgnc_board *brd);
 static void cls_uart_init(struct channel_t *ch);
 static void cls_uart_off(struct channel_t *ch);
 static int cls_drain(struct tty_struct *tty, uint seconds);
@@ -393,7 +393,7 @@
 
 
 /* Parse the ISR register for the specific port */
-static inline void cls_parse_isr(struct board_t *brd, uint port)
+static inline void cls_parse_isr(struct dgnc_board *brd, uint port)
 {
 	struct channel_t *ch;
 	uchar isr = 0;
@@ -417,9 +417,8 @@
 		isr = readb(&ch->ch_cls_uart->isr_fcr);
 
 		/* Bail if no pending interrupt on port */
-		if (isr & UART_IIR_NO_INT)  {
+		if (isr & UART_IIR_NO_INT)
 			break;
-		}
 
 		DPR_INTR(("%s:%d port: %x isr: %x\n", __FILE__, __LINE__, port, isr));
 
@@ -444,9 +443,8 @@
 		}
 
 		/* Received Xoff signal/Special character */
-		if (isr & UART_IIR_XOFF) {
+		if (isr & UART_IIR_XOFF)
 			/* Empty */
-		}
 
 		/* CTS/RTS change of state */
 		if (isr & UART_IIR_CTSRTS) {
@@ -477,28 +475,24 @@
 	uchar uart_ier = 0;
         uint baud = 9600;
 	int quot = 0;
-        struct board_t *bd;
+        struct dgnc_board *bd;
 	struct channel_t *ch;
         struct un_t   *un;
 
-	if (!tty || tty->magic != TTY_MAGIC) {
+	if (!tty || tty->magic != TTY_MAGIC)
 		return;
-	}
 
 	un = (struct un_t *) tty->driver_data;
-	if (!un || un->magic != DGNC_UNIT_MAGIC) {
+	if (!un || un->magic != DGNC_UNIT_MAGIC)
 		return;
-	}
 
 	ch = un->un_ch;
-	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC) {
+	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 		return;
-	}
 
 	bd = ch->ch_bd;
-	if (!bd || bd->magic != DGNC_BOARD_MAGIC) {
+	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
 		return;
-	}
 
 	DPR_PARAM(("param start: tdev: %x cflags: %x oflags: %x iflags: %x\n",
 		ch->ch_tun.un_dev, ch->ch_c_cflag, ch->ch_c_oflag, ch->ch_c_iflag));
@@ -725,7 +719,7 @@
  */
 static void cls_tasklet(unsigned long data)
 {
-        struct board_t *bd = (struct board_t *) data;
+        struct dgnc_board *bd = (struct dgnc_board *) data;
 	struct channel_t *ch;
 	ulong  lock_flags;
 	int i;
@@ -802,7 +796,7 @@
  */
 static irqreturn_t cls_intr(int irq, void *voidbrd)
 {
-	struct board_t *brd = (struct board_t *) voidbrd;
+	struct dgnc_board *brd = (struct dgnc_board *) voidbrd;
 	uint i = 0;
 	uchar poll_reg;
 	unsigned long lock_flags;
@@ -976,17 +970,17 @@
 	int rc = 0;
 
 	if (!tty || tty->magic != TTY_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	un = (struct un_t *) tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -1002,7 +996,7 @@
 	if (rc)
 		DPR_IOCTL(("%d Drain - User ctrl c'ed\n", __LINE__));
 
-        return (rc);
+        return rc;
 }
 
 
@@ -1305,9 +1299,8 @@
 
 	/* Determine whether the Transmitter is empty or not */
 	if (!(lsr & UART_LSR_TEMT)) {
-		if (ch->ch_flags & CH_TX_FIFO_EMPTY) {
+		if (ch->ch_flags & CH_TX_FIFO_EMPTY)
 			tasklet_schedule(&ch->ch_bd->helper_tasklet);
-		}
 		left = 1;
 	}
 	else {
@@ -1378,7 +1371,7 @@
 	writeb(c, &ch->ch_cls_uart->txrx);
 }
 
-static void cls_vpd(struct board_t *brd)
+static void cls_vpd(struct dgnc_board *brd)
 {
         ulong           vpdbase;        /* Start of io base of the card */
         u8 __iomem           *re_map_vpdbase;/* Remapped memory of the card */
diff --git a/drivers/staging/dgnc/dgnc_driver.c b/drivers/staging/dgnc/dgnc_driver.c
index 71d2b83..c204266 100644
--- a/drivers/staging/dgnc/dgnc_driver.c
+++ b/drivers/staging/dgnc/dgnc_driver.c
@@ -31,15 +31,10 @@
 
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
 #include <linux/sched.h>
-#endif
-
 #include "dgnc_driver.h"
 #include "dgnc_pci.h"
 #include "dpacompat.h"
@@ -71,16 +66,16 @@
  *
  */
 static int		dgnc_start(void);
-static int		dgnc_finalize_board_init(struct board_t *brd);
+static int		dgnc_finalize_board_init(struct dgnc_board *brd);
 static void		dgnc_init_globals(void);
 static int		dgnc_found_board(struct pci_dev *pdev, int id);
-static void		dgnc_cleanup_board(struct board_t *brd);
+static void		dgnc_cleanup_board(struct dgnc_board *brd);
 static void		dgnc_poll_handler(ulong dummy);
 static int		dgnc_init_pci(void);
 static int		dgnc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static void		dgnc_remove_one(struct pci_dev *dev);
 static int		dgnc_probe1(struct pci_dev *pdev, int card_type);
-static void		dgnc_do_remap(struct board_t *brd);
+static void		dgnc_do_remap(struct dgnc_board *brd);
 
 /* Driver load/unload functions */
 int		dgnc_init_module(void);
@@ -106,7 +101,7 @@
  * Globals
  */
 uint			dgnc_NumBoards;
-struct board_t		*dgnc_Board[MAXBOARDS];
+struct dgnc_board		*dgnc_Board[MAXBOARDS];
 DEFINE_SPINLOCK(dgnc_global_lock);
 int			dgnc_driver_state = DRIVER_INITIALIZED;
 ulong			dgnc_poll_counter;
@@ -225,7 +220,7 @@
 	rc = dgnc_start();
 
 	if (rc < 0) {
-		return(rc);
+		return rc;
 	}
 
 	/*
@@ -250,7 +245,7 @@
 	}
 
 	DPR_INIT(("Finished init_module. Returning %d\n", rc));
-	return (rc);
+	return rc;
 }
 
 
@@ -286,21 +281,14 @@
 			if (rc <= 0) {
 				APR(("Can't register dgnc driver device (%d)\n", rc));
 				rc = -ENXIO;
-				return(rc);
+				return rc;
 			}
 			dgnc_Major = rc;
 
 			dgnc_class = class_create(THIS_MODULE, "dgnc_mgmt");
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-			device_create_drvdata(dgnc_class, NULL,
-				MKDEV(dgnc_Major, 0),
-				NULL, "dgnc_mgmt");
-#else
 			device_create(dgnc_class, NULL,
 				MKDEV(dgnc_Major, 0),
 				NULL, "dgnc_mgmt");
-#endif
-
 			dgnc_Major_Control_Registered = TRUE;
 		}
 
@@ -311,7 +299,7 @@
 
 		if (rc < 0) {
 			APR(("tty preinit - not enough memory (%d)\n", rc));
-			return(rc);
+			return rc;
 		}
 
 		/* Start the poller */
@@ -328,7 +316,7 @@
 		dgnc_driver_state = DRIVER_READY;
 	}
 
-	return(rc);
+	return rc;
 }
 
 /*
@@ -418,7 +406,7 @@
  *
  * Free all the memory associated with a board
  */
-static void dgnc_cleanup_board(struct board_t *brd)
+static void dgnc_cleanup_board(struct dgnc_board *brd)
 {
 	int i = 0;
 
@@ -491,7 +479,7 @@
  */
 static int dgnc_found_board(struct pci_dev *pdev, int id)
 {
-	struct board_t *brd;
+	struct dgnc_board *brd;
 	unsigned int pci_irq;
 	int i = 0;
 	int rc = 0;
@@ -499,19 +487,16 @@
 
 	/* get the board structure and prep it */
 	brd = dgnc_Board[dgnc_NumBoards] =
-	(struct board_t *) kzalloc(sizeof(struct board_t), GFP_KERNEL);
-	if (!brd) {
-		APR(("memory allocation for board structure failed\n"));
-		return(-ENOMEM);
-	}
+		kzalloc(sizeof(*brd), GFP_KERNEL);
+	if (!brd) 
+		return -ENOMEM;
 
 	/* make a temporary message buffer for the boot messages */
 	brd->msgbuf = brd->msgbuf_head =
-		(char *) kzalloc(sizeof(char) * 8192, GFP_KERNEL);
+		kzalloc(sizeof(u8) * 8192, GFP_KERNEL);
 	if (!brd->msgbuf) {
 		kfree(brd);
-		APR(("memory allocation for board msgbuf failed\n"));
-		return(-ENOMEM);
+		return -ENOMEM;
 	}
 
 	/* store the info for the board we've found */
@@ -663,7 +648,7 @@
 
 	default:
 		APR(("Did not find any compatible Neo or Classic PCI boards in system.\n"));
-		return (-ENXIO);
+		return -ENXIO;
 
 	}
 
@@ -725,22 +710,22 @@
 
 	wake_up_interruptible(&brd->state_wait);
 
-	return(0);
+	return 0;
 
 failed:
 
-	return (-ENXIO);
+	return -ENXIO;
 
 }
 
 
-static int dgnc_finalize_board_init(struct board_t *brd) {
+static int dgnc_finalize_board_init(struct dgnc_board *brd) {
 	int rc = 0;
 
 	DPR_INIT(("dgnc_finalize_board_init() - start\n"));
 
 	if (!brd || brd->magic != DGNC_BOARD_MAGIC)
-		return(-ENODEV);
+		return -ENODEV;
 
 	DPR_INIT(("dgnc_finalize_board_init() - start #2\n"));
 
@@ -756,13 +741,13 @@
 			DPR_INIT(("Requested and received usage of IRQ %d\n", brd->irq));
 		}
 	}
-	return(rc);
+	return rc;
 }
 
 /*
  * Remap PCI memory.
  */
-static void dgnc_do_remap(struct board_t *brd)
+static void dgnc_do_remap(struct dgnc_board *brd)
 {
 
 	if (!brd || brd->magic != DGNC_BOARD_MAGIC)
@@ -802,7 +787,7 @@
 
 static void dgnc_poll_handler(ulong dummy)
 {
-	struct board_t *brd;
+	struct dgnc_board *brd;
 	unsigned long lock_flags;
 	int i;
 	unsigned long new_time;
@@ -900,7 +885,7 @@
 {
 	current->state = TASK_INTERRUPTIBLE;
 	schedule_timeout((ms * HZ) / 1000);
-	return (signal_pending(current));
+	return signal_pending(current);
 }
 
 
@@ -912,47 +897,47 @@
 {
 	switch(cmd) {
 
-	case TCGETA:		return("TCGETA");
-	case TCGETS:		return("TCGETS");
-	case TCSETA:		return("TCSETA");
-	case TCSETS:		return("TCSETS");
-	case TCSETAW:		return("TCSETAW");
-	case TCSETSW:		return("TCSETSW");
-	case TCSETAF:		return("TCSETAF");
-	case TCSETSF:		return("TCSETSF");
-	case TCSBRK:		return("TCSBRK");
-	case TCXONC:		return("TCXONC");
-	case TCFLSH:		return("TCFLSH");
-	case TIOCGSID:		return("TIOCGSID");
+	case TCGETA:		return "TCGETA";
+	case TCGETS:		return "TCGETS";
+	case TCSETA:		return "TCSETA";
+	case TCSETS:		return "TCSETS";
+	case TCSETAW:		return "TCSETAW";
+	case TCSETSW:		return "TCSETSW";
+	case TCSETAF:		return "TCSETAF";
+	case TCSETSF:		return "TCSETSF";
+	case TCSBRK:		return "TCSBRK";
+	case TCXONC:		return "TCXONC";
+	case TCFLSH:		return "TCFLSH";
+	case TIOCGSID:		return "TIOCGSID";
 
-	case TIOCGETD:		return("TIOCGETD");
-	case TIOCSETD:		return("TIOCSETD");
-	case TIOCGWINSZ:	return("TIOCGWINSZ");
-	case TIOCSWINSZ:	return("TIOCSWINSZ");
+	case TIOCGETD:		return "TIOCGETD";
+	case TIOCSETD:		return "TIOCSETD";
+	case TIOCGWINSZ:	return "TIOCGWINSZ";
+	case TIOCSWINSZ:	return "TIOCSWINSZ";
 
-	case TIOCMGET:		return("TIOCMGET");
-	case TIOCMSET:		return("TIOCMSET");
-	case TIOCMBIS:		return("TIOCMBIS");
-	case TIOCMBIC:		return("TIOCMBIC");
+	case TIOCMGET:		return "TIOCMGET";
+	case TIOCMSET:		return "TIOCMSET";
+	case TIOCMBIS:		return "TIOCMBIS";
+	case TIOCMBIC:		return "TIOCMBIC";
 
 	/* from digi.h */
-	case DIGI_SETA:		return("DIGI_SETA");
-	case DIGI_SETAW:	return("DIGI_SETAW");
-	case DIGI_SETAF:	return("DIGI_SETAF");
-	case DIGI_SETFLOW:	return("DIGI_SETFLOW");
-	case DIGI_SETAFLOW:	return("DIGI_SETAFLOW");
-	case DIGI_GETFLOW:	return("DIGI_GETFLOW");
-	case DIGI_GETAFLOW:	return("DIGI_GETAFLOW");
-	case DIGI_GETA:		return("DIGI_GETA");
-	case DIGI_GEDELAY:	return("DIGI_GEDELAY");
-	case DIGI_SEDELAY:	return("DIGI_SEDELAY");
-	case DIGI_GETCUSTOMBAUD: return("DIGI_GETCUSTOMBAUD");
-	case DIGI_SETCUSTOMBAUD: return("DIGI_SETCUSTOMBAUD");
-	case TIOCMODG:		return("TIOCMODG");
-	case TIOCMODS:		return("TIOCMODS");
-	case TIOCSDTR:		return("TIOCSDTR");
-	case TIOCCDTR:		return("TIOCCDTR");
+	case DIGI_SETA:		return "DIGI_SETA";
+	case DIGI_SETAW:	return "DIGI_SETAW";
+	case DIGI_SETAF:	return "DIGI_SETAF";
+	case DIGI_SETFLOW:	return "DIGI_SETFLOW";
+	case DIGI_SETAFLOW:	return "DIGI_SETAFLOW";
+	case DIGI_GETFLOW:	return "DIGI_GETFLOW";
+	case DIGI_GETAFLOW:	return "DIGI_GETAFLOW";
+	case DIGI_GETA:		return "DIGI_GETA";
+	case DIGI_GEDELAY:	return "DIGI_GEDELAY";
+	case DIGI_SEDELAY:	return "DIGI_SEDELAY";
+	case DIGI_GETCUSTOMBAUD: return "DIGI_GETCUSTOMBAUD";
+	case DIGI_SETCUSTOMBAUD: return "DIGI_SETCUSTOMBAUD";
+	case TIOCMODG:		return "TIOCMODG";
+	case TIOCMODS:		return "TIOCMODS";
+	case TIOCSDTR:		return "TIOCSDTR";
+	case TIOCCDTR:		return "TIOCCDTR";
 
-	default:		return("unknown");
+	default:		return "unknown";
 	}
 }
diff --git a/drivers/staging/dgnc/dgnc_driver.h b/drivers/staging/dgnc/dgnc_driver.h
index 218b15d..3519b80 100644
--- a/drivers/staging/dgnc/dgnc_driver.h
+++ b/drivers/staging/dgnc/dgnc_driver.h
@@ -45,7 +45,7 @@
 /*
  * Driver identification, error and debugging statments
  *
- * In theory, you can change all occurances of "digi" in the next
+ * In theory, you can change all occurrences of "digi" in the next
  * three lines, and the driver printk's will all automagically change.
  *
  * APR((fmt, args, ...));	Always prints message
@@ -246,7 +246,7 @@
  *
  *************************************************************************/
 
-struct board_t;
+struct dgnc_board;
 struct channel_t;
 
 /************************************************************************
@@ -259,7 +259,7 @@
 	void (*uart_off) (struct channel_t *ch);
 	int  (*drain) (struct tty_struct *tty, uint seconds);
 	void (*param) (struct tty_struct *tty);
-	void (*vpd) (struct board_t *brd);
+	void (*vpd) (struct dgnc_board *brd);
 	void (*assert_modem_signals) (struct channel_t *ch);
 	void (*flush_uart_write) (struct channel_t *ch);
 	void (*flush_uart_read) (struct channel_t *ch);
@@ -282,7 +282,7 @@
 /*
  *	Per-board information
  */
-struct board_t {
+struct dgnc_board {
 	int		magic;		/* Board Magic number.  */
 	int		boardnum;	/* Board number: 0-32 */
 
@@ -449,7 +449,7 @@
  ************************************************************************/
 struct channel_t {
 	int magic;			/* Channel Magic Number		*/
-	struct board_t	*ch_bd;		/* Board structure pointer      */
+	struct dgnc_board	*ch_bd;		/* Board structure pointer      */
 	struct digi_t	ch_digi;	/* Transparent Print structure  */
 	struct un_t	ch_tun;		/* Terminal unit info	   */
 	struct un_t	ch_pun;		/* Printer unit info	    */
@@ -555,7 +555,7 @@
 extern int		dgnc_trcbuf_size;	/* Size of the ringbuffer	*/
 extern spinlock_t	dgnc_global_lock;	/* Driver global spinlock	*/
 extern uint		dgnc_NumBoards;		/* Total number of boards	*/
-extern struct board_t	*dgnc_Board[MAXBOARDS];	/* Array of board structs	*/
+extern struct dgnc_board	*dgnc_Board[MAXBOARDS];	/* Array of board structs	*/
 extern ulong		dgnc_poll_counter;	/* Times the poller has run	*/
 extern char		*dgnc_state_text[];	/* Array of state text		*/
 extern char		*dgnc_driver_state_text[];/* Array of driver state text */
diff --git a/drivers/staging/dgnc/dgnc_kcompat.h b/drivers/staging/dgnc/dgnc_kcompat.h
index 00f589a..eaec7e6 100644
--- a/drivers/staging/dgnc/dgnc_kcompat.h
+++ b/drivers/staging/dgnc/dgnc_kcompat.h
@@ -28,13 +28,6 @@
 #ifndef __DGNC_KCOMPAT_H
 #define __DGNC_KCOMPAT_H
 
-#include <linux/version.h>
-
-# ifndef KERNEL_VERSION
-#  define KERNEL_VERSION(a,b,c)  (((a) << 16) + ((b) << 8) + (c))
-# endif
-
-
 #if !defined(TTY_FLIPBUF_SIZE)
 # define TTY_FLIPBUF_SIZE 512
 #endif
@@ -68,26 +61,4 @@
 		module_param(VAR, long, PERM); \
 		MODULE_PARM_DESC(VAR, DESC);
 
-
-
-
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
-
-
-
-/* NOTHING YET */
-
-
-
-# else
-
-
-
-# error "this driver does not support anything below the 2.6.27 kernel series."
-
-
-
-# endif
-
 #endif /* ! __DGNC_KCOMPAT_H */
diff --git a/drivers/staging/dgnc/dgnc_mgmt.c b/drivers/staging/dgnc/dgnc_mgmt.c
index c4629d7..1c5ab3d 100644
--- a/drivers/staging/dgnc/dgnc_mgmt.c
+++ b/drivers/staging/dgnc/dgnc_mgmt.c
@@ -74,13 +74,13 @@
 		/* Only allow 1 open at a time on mgmt device */
 		if (dgnc_mgmt_in_use[minor]) {
 			DGNC_UNLOCK(dgnc_global_lock, lock_flags);
-			return (-EBUSY);
+			return -EBUSY;
 		}
 		dgnc_mgmt_in_use[minor]++;
 	}
 	else {
 		DGNC_UNLOCK(dgnc_global_lock, lock_flags);
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	DGNC_UNLOCK(dgnc_global_lock, lock_flags);
@@ -154,7 +154,7 @@
 			ddi.dinfo_nboards, ddi.dinfo_version));
 
 		if (copy_to_user(uarg, &ddi, sizeof (ddi)))
-			return(-EFAULT);
+			return -EFAULT;
 
 		break;
 	}
@@ -166,13 +166,13 @@
 		struct digi_info di;
 
 		if (copy_from_user(&brd, uarg, sizeof(int))) {
-			return(-EFAULT);
+			return -EFAULT;
 		}
 
 		DPR_MGMT(("DIGI_GETBD asking about board: %d\n", brd));
 
 		if ((brd < 0) || (brd > dgnc_NumBoards) || (dgnc_NumBoards == 0))
-			return (-ENODEV);
+			return -ENODEV;
 
 		memset(&di, 0, sizeof(di));
 
@@ -196,7 +196,7 @@
 			di.info_bdtype, di.info_bdstate, di.info_nports, di.info_physsize));
 
 		if (copy_to_user(uarg, &di, sizeof (di)))
-			return (-EFAULT);
+			return -EFAULT;
 
 		break;
 	}
@@ -209,8 +209,8 @@
 		uint board = 0;
 		uint channel = 0;
 
-		if (copy_from_user(&ni, uarg, sizeof(struct ni_info))) {
-			return(-EFAULT);
+		if (copy_from_user(&ni, uarg, sizeof(ni))) {
+			return -EFAULT;
 		}
 
 		DPR_MGMT(("DIGI_GETBD asking about board: %d channel: %d\n",
@@ -220,17 +220,17 @@
 		channel = ni.channel;
 
 		/* Verify boundaries on board */
-		if ((board < 0) || (board > dgnc_NumBoards) || (dgnc_NumBoards == 0))
-			return (-ENODEV);
+		if ((board > dgnc_NumBoards) || (dgnc_NumBoards == 0))
+			return -ENODEV;
 
 		/* Verify boundaries on channel */
 		if ((channel < 0) || (channel > dgnc_Board[board]->nasync))
-			return (-ENODEV);
+			return -ENODEV;
 
 		ch = dgnc_Board[board]->channels[channel];
 
 		if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-			return (-ENODEV);
+			return -ENODEV;
 
 		memset(&ni, 0, sizeof(ni));
 		ni.board = board;
@@ -291,7 +291,7 @@
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 
 		if (copy_to_user(uarg, &ni, sizeof(ni)))
-			return (-EFAULT);
+			return -EFAULT;
 
 		break;
 	}
diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c
index 8b9e09a..dc5a138 100644
--- a/drivers/staging/dgnc/dgnc_neo.c
+++ b/drivers/staging/dgnc/dgnc_neo.c
@@ -43,8 +43,8 @@
 #include "dgnc_tty.h"
 #include "dgnc_trace.h"
 
-static inline void neo_parse_lsr(struct board_t *brd, uint port);
-static inline void neo_parse_isr(struct board_t *brd, uint port);
+static inline void neo_parse_lsr(struct dgnc_board *brd, uint port);
+static inline void neo_parse_isr(struct dgnc_board *brd, uint port);
 static void neo_copy_data_from_uart_to_queue(struct channel_t *ch);
 static inline void neo_clear_break(struct channel_t *ch, int force);
 static inline void neo_set_cts_flow_control(struct channel_t *ch);
@@ -56,7 +56,7 @@
 static inline void neo_set_new_start_stop_chars(struct channel_t *ch);
 static void neo_parse_modem(struct channel_t *ch, uchar signals);
 static void neo_tasklet(unsigned long data);
-static void neo_vpd(struct board_t *brd);
+static void neo_vpd(struct dgnc_board *brd);
 static void neo_uart_init(struct channel_t *ch);
 static void neo_uart_off(struct channel_t *ch);
 static int neo_drain(struct tty_struct *tty, uint seconds);
@@ -107,7 +107,7 @@
  * In this case, we are reading the DVID (Read-only Device Identification)
  * value of the Neo card.
  */
-static inline void neo_pci_posting_flush(struct board_t *bd)
+static inline void neo_pci_posting_flush(struct dgnc_board *bd)
 {
 	readb(bd->re_map_membase + 0x8D);
 }
@@ -411,7 +411,7 @@
 /*
  * Parse the ISR register.
  */
-static inline void neo_parse_isr(struct board_t *brd, uint port)
+static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 {
 	struct channel_t *ch;
 	uchar isr;
@@ -538,7 +538,7 @@
 }
 
 
-static inline void neo_parse_lsr(struct board_t *brd, uint port)
+static inline void neo_parse_lsr(struct dgnc_board *brd, uint port)
 {
 	struct channel_t *ch;
 	int linestatus;
@@ -650,7 +650,7 @@
 	uchar uart_ier = 0;
 	uint baud = 9600;
 	int quot = 0;
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t   *un;
 
@@ -911,7 +911,7 @@
  */
 static void neo_tasklet(unsigned long data)
 {
-	struct board_t *bd = (struct board_t *) data;
+	struct dgnc_board *bd = (struct dgnc_board *) data;
 	struct channel_t *ch;
 	ulong  lock_flags;
 	int i;
@@ -994,7 +994,7 @@
  */
 static irqreturn_t neo_intr(int irq, void *voidbrd)
 {
-	struct board_t *brd = (struct board_t *) voidbrd;
+	struct dgnc_board *brd = (struct dgnc_board *) voidbrd;
 	struct channel_t *ch;
 	int port = 0;
 	int type = 0;
@@ -1111,7 +1111,7 @@
 			 * Why would I check EVERY possibility of type of
 			 * interrupt, when we know its TXRDY???
 			 * Becuz for some reason, even tho we got triggered for TXRDY,
-			 * it seems to be occassionally wrong. Instead of TX, which
+			 * it seems to be occasionally wrong. Instead of TX, which
 			 * it should be, I was getting things like RXDY too. Weird.
 			 */
 			neo_parse_isr(brd, port);
@@ -1404,17 +1404,17 @@
 	int rc = 0;
 
 	if (!tty || tty->magic != TTY_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	un = (struct un_t *) tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	DPR_IOCTL(("%d Drain wait started.\n", __LINE__));
@@ -1439,7 +1439,7 @@
 		DPR_IOCTL(("%d Drain wait finished.\n", __LINE__));
 	}
 
-	return (rc);
+	return rc;
 }
 
 
@@ -1939,7 +1939,7 @@
 }
 
 
-static void neo_vpd(struct board_t *brd)
+static void neo_vpd(struct dgnc_board *brd)
 {
 	unsigned int i = 0;
 	unsigned int a;
@@ -1965,7 +1965,7 @@
 	}
 	else {
 		/* Search for the serial number */
-		for (i = 0; i < NEO_VPD_IMAGESIZE * 2; i++) {
+		for (i = 0; i < NEO_VPD_IMAGEBYTES - 3; i++) {
 			if (brd->vpd[i] == 'S' && brd->vpd[i + 1] == 'N') {
 				strncpy(brd->serial_num, &(brd->vpd[i + 3]), 9);
 			}
diff --git a/drivers/staging/dgnc/dgnc_neo.h b/drivers/staging/dgnc/dgnc_neo.h
index 7ec5710..1a4abb1 100644
--- a/drivers/staging/dgnc/dgnc_neo.h
+++ b/drivers/staging/dgnc/dgnc_neo.h
@@ -47,7 +47,7 @@
 	u8 fctr;		/* WR  FCTR - Feature Control Reg */
 	u8 efr;		/* WR  EFR - Enhanced Function Reg */
 	u8 tfifo;		/* WR  TXCNT/TXTRG - Transmit FIFO Reg */
-	u8 rfifo;		/* WR  RXCNT/RXTRG - Recieve  FIFO Reg */
+	u8 rfifo;		/* WR  RXCNT/RXTRG - Receive  FIFO Reg */
 	u8 xoffchar1;	/* WR  XOFF 1 - XOff Character 1 Reg */
 	u8 xoffchar2;	/* WR  XOFF 2 - XOff Character 2 Reg */
 	u8 xonchar1;	/* WR  XON 1 - Xon Character 1 Reg */
diff --git a/drivers/staging/dgnc/dgnc_sysfs.c b/drivers/staging/dgnc/dgnc_sysfs.c
index 0ea6c80..946230c 100644
--- a/drivers/staging/dgnc/dgnc_sysfs.c
+++ b/drivers/staging/dgnc/dgnc_sysfs.c
@@ -152,19 +152,19 @@
 
 #define DGNC_VERIFY_BOARD(p, bd)			\
 	if (!p)						\
-		return (0);				\
+		return 0;				\
 							\
 	bd = dev_get_drvdata(p);			\
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)	\
-		return (0);				\
+		return 0;				\
 	if (bd->state != BOARD_READY)			\
-		return (0);				\
+		return 0;				\
 
 
 
 static ssize_t dgnc_vpd_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -184,7 +184,7 @@
 
 static ssize_t dgnc_serial_number_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 
 	DGNC_VERIFY_BOARD(p, bd);
@@ -201,7 +201,7 @@
 
 static ssize_t dgnc_ports_state_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -219,7 +219,7 @@
 
 static ssize_t dgnc_ports_baud_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -236,7 +236,7 @@
 
 static ssize_t dgnc_ports_msignals_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -264,7 +264,7 @@
 
 static ssize_t dgnc_ports_iflag_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -281,7 +281,7 @@
 
 static ssize_t dgnc_ports_cflag_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -298,7 +298,7 @@
 
 static ssize_t dgnc_ports_oflag_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -315,7 +315,7 @@
 
 static ssize_t dgnc_ports_lflag_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -332,7 +332,7 @@
 
 static ssize_t dgnc_ports_digi_flag_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -349,7 +349,7 @@
 
 static ssize_t dgnc_ports_rxcount_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -366,7 +366,7 @@
 
 static ssize_t dgnc_ports_txcount_show(struct device *p, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	int count = 0;
 	int i = 0;
 
@@ -384,7 +384,7 @@
 /* this function creates the sys files that will export each signal status
  * to sysfs each value will be put in a separate filename
  */
-void dgnc_create_ports_sysfiles(struct board_t *bd)
+void dgnc_create_ports_sysfiles(struct dgnc_board *bd)
 {
 	int rc = 0;
 
@@ -408,7 +408,7 @@
 
 
 /* removes all the sys files created for that port */
-void dgnc_remove_ports_sysfiles(struct board_t *bd)
+void dgnc_remove_ports_sysfiles(struct dgnc_board *bd)
 {
 	device_remove_file(&(bd->pdev->dev), &dev_attr_ports_state);
 	device_remove_file(&(bd->pdev->dev), &dev_attr_ports_baud);
@@ -427,23 +427,23 @@
 
 static ssize_t dgnc_tty_state_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%s", un->un_open_count ? "Open" : "Closed");
 }
@@ -452,23 +452,23 @@
 
 static ssize_t dgnc_tty_baud_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%d\n", ch->ch_old_baud);
 }
@@ -477,23 +477,23 @@
 
 static ssize_t dgnc_tty_msignals_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	if (ch->ch_open_count) {
 		return snprintf(buf, PAGE_SIZE, "%s %s %s %s %s %s\n",
@@ -511,23 +511,23 @@
 
 static ssize_t dgnc_tty_iflag_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_iflag);
 }
@@ -536,23 +536,23 @@
 
 static ssize_t dgnc_tty_cflag_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_cflag);
 }
@@ -561,23 +561,23 @@
 
 static ssize_t dgnc_tty_oflag_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_oflag);
 }
@@ -586,23 +586,23 @@
 
 static ssize_t dgnc_tty_lflag_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_lflag);
 }
@@ -611,23 +611,23 @@
 
 static ssize_t dgnc_tty_digi_flag_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_digi.digi_flags);
 }
@@ -636,23 +636,23 @@
 
 static ssize_t dgnc_tty_rxcount_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%ld\n", ch->ch_rxcount);
 }
@@ -661,23 +661,23 @@
 
 static ssize_t dgnc_tty_txcount_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%ld\n", ch->ch_txcount);
 }
@@ -686,23 +686,23 @@
 
 static ssize_t dgnc_tty_name_show(struct device *d, struct device_attribute *attr, char *buf)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 
 	if (!d)
-		return (0);
-	un = (struct un_t *) dev_get_drvdata(d);
+		return 0;
+	un = dev_get_drvdata(d);
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (0);
+		return 0;
 	if (bd->state != BOARD_READY)
-		return (0);
+		return 0;
 
 	return snprintf(buf, PAGE_SIZE, "%sn%d%c\n",
 		(un->un_type == DGNC_PRINT) ? "pr" : "tty",
diff --git a/drivers/staging/dgnc/dgnc_sysfs.h b/drivers/staging/dgnc/dgnc_sysfs.h
index 4b87ce1..68c0de5 100644
--- a/drivers/staging/dgnc/dgnc_sysfs.h
+++ b/drivers/staging/dgnc/dgnc_sysfs.h
@@ -26,14 +26,14 @@
 
 #include <linux/device.h>
 
-struct board_t;
+struct dgnc_board;
 struct channel_t;
 struct un_t;
 struct pci_driver;
 struct class_device;
 
-extern void dgnc_create_ports_sysfiles(struct board_t *bd);
-extern void dgnc_remove_ports_sysfiles(struct board_t *bd);
+extern void dgnc_create_ports_sysfiles(struct dgnc_board *bd);
+extern void dgnc_remove_ports_sysfiles(struct dgnc_board *bd);
 
 extern void dgnc_create_driver_sysfiles(struct pci_driver *);
 extern void dgnc_remove_driver_sysfiles(struct pci_driver *);
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index a7bb6bc..a6c6aba 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -38,7 +38,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/sched.h>	/* For jiffies, task states */
 #include <linux/interrupt.h>	/* For tasklet and interrupt structs/defines */
 #include <linux/module.h>
@@ -60,16 +59,14 @@
 #include "dpacompat.h"
 #include "dgnc_sysfs.h"
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
 #define init_MUTEX(sem)	 sema_init(sem, 1)
 #define DECLARE_MUTEX(name)     \
 	struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
-#endif
 
 /*
  * internal variables
  */
-static struct board_t	*dgnc_BoardsByMajor[256];
+static struct dgnc_board	*dgnc_BoardsByMajor[256];
 static uchar		*dgnc_TmpWriteBuf = NULL;
 static DECLARE_MUTEX(dgnc_TmpWriteSem);
 
@@ -126,13 +123,8 @@
 static void dgnc_tty_hangup(struct tty_struct *tty);
 static int dgnc_set_modem_info(struct tty_struct *tty, unsigned int command, unsigned int __user *value);
 static int dgnc_get_modem_info(struct channel_t *ch, unsigned int __user *value);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
 static int dgnc_tty_tiocmget(struct tty_struct *tty);
 static int dgnc_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear);
-#else
-static int dgnc_tty_tiocmget(struct tty_struct *tty, struct file *file);
-static int dgnc_tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
-#endif
 static int dgnc_tty_send_break(struct tty_struct *tty, int msec);
 static void dgnc_tty_wait_until_sent(struct tty_struct *tty, int timeout);
 static int dgnc_tty_write(struct tty_struct *tty, const unsigned char *buf, int count);
@@ -190,10 +182,10 @@
 
 	if (!dgnc_TmpWriteBuf) {
 		DPR_INIT(("unable to allocate tmp write buf"));
-		return (-ENOMEM);
+		return -ENOMEM;
 	}
 
-	return(0);
+	return 0;
 }
 
 
@@ -202,14 +194,14 @@
  *
  * Init the tty subsystem for this board.
  */
-int dgnc_tty_register(struct board_t *brd)
+int dgnc_tty_register(struct dgnc_board *brd)
 {
 	int rc = 0;
 
 	DPR_INIT(("tty_register start\n"));
 
-	memset(&brd->SerialDriver, 0, sizeof(struct tty_driver));
-	memset(&brd->PrintDriver, 0, sizeof(struct tty_driver));
+	memset(&brd->SerialDriver, 0, sizeof(brd->SerialDriver));
+	memset(&brd->PrintDriver, 0, sizeof(brd->PrintDriver));
 
 	brd->SerialDriver.magic = TTY_DRIVER_MAGIC;
 
@@ -230,25 +222,15 @@
 	 * The kernel wants space to store pointers to
 	 * tty_struct's and termios's.
 	 */
-	brd->SerialDriver.ttys = kzalloc(brd->maxports * sizeof(struct tty_struct *), GFP_KERNEL);
+	brd->SerialDriver.ttys = kzalloc(brd->maxports * sizeof(*brd->SerialDriver.ttys), GFP_KERNEL);
 	if (!brd->SerialDriver.ttys)
-		return(-ENOMEM);
+		return -ENOMEM;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-	brd->SerialDriver.refcount = brd->TtyRefCnt;
-#else
 	kref_init(&brd->SerialDriver.kref);
-#endif
-
-	brd->SerialDriver.termios = kzalloc(brd->maxports * sizeof(struct ktermios *), GFP_KERNEL);
+	brd->SerialDriver.termios = kzalloc(brd->maxports * sizeof(*brd->SerialDriver.termios), GFP_KERNEL);
 	if (!brd->SerialDriver.termios)
-		return(-ENOMEM);
+		return -ENOMEM;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0)
-	brd->SerialDriver.termios_locked = kzalloc(brd->maxports * sizeof(struct ktermios *), GFP_KERNEL);
-	if (!brd->SerialDriver.termios_locked)
-		return(-ENOMEM);
-#endif
 	/*
 	 * Entry points for driver.  Called by the kernel from
 	 * tty_io.c and n_tty.c.
@@ -260,14 +242,14 @@
 		rc = tty_register_driver(&brd->SerialDriver);
 		if (rc < 0) {
 			APR(("Can't register tty device (%d)\n", rc));
-			return(rc);
+			return rc;
 		}
 		brd->dgnc_Major_Serial_Registered = TRUE;
 	}
 
 	/*
 	 * If we're doing transparent print, we have to do all of the above
-	 * again, seperately so we don't get the LD confused about what major
+	 * again, separately so we don't get the LD confused about what major
 	 * we are when we get into the dgnc_tty_open() routine.
 	 */
 	brd->PrintDriver.magic = TTY_DRIVER_MAGIC;
@@ -286,28 +268,16 @@
 
 	/*
 	 * The kernel wants space to store pointers to
-	 * tty_struct's and termios's.  Must be seperate from
+	 * tty_struct's and termios's.  Must be separated from
 	 * the Serial Driver so we don't get confused
 	 */
-	brd->PrintDriver.ttys = kzalloc(brd->maxports * sizeof(struct tty_struct *), GFP_KERNEL);
+	brd->PrintDriver.ttys = kzalloc(brd->maxports * sizeof(*brd->PrintDriver.ttys), GFP_KERNEL);
 	if (!brd->PrintDriver.ttys)
-		return(-ENOMEM);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-	brd->PrintDriver.refcount = brd->TtyRefCnt;
-#else
+		return -ENOMEM;
 	kref_init(&brd->PrintDriver.kref);
-#endif
-
-	brd->PrintDriver.termios = kzalloc(brd->maxports * sizeof(struct ktermios *), GFP_KERNEL);
+	brd->PrintDriver.termios = kzalloc(brd->maxports * sizeof(*brd->PrintDriver.termios), GFP_KERNEL);
 	if (!brd->PrintDriver.termios)
-		return(-ENOMEM);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0)
-	brd->PrintDriver.termios_locked = kzalloc(brd->maxports * sizeof(struct ktermios *), GFP_KERNEL);
-	if (!brd->PrintDriver.termios_locked)
-		return(-ENOMEM);
-#endif
+		return -ENOMEM;
 
 	/*
 	 * Entry points for driver.  Called by the kernel from
@@ -320,7 +290,7 @@
 		rc = tty_register_driver(&brd->PrintDriver);
 		if (rc < 0) {
 			APR(("Can't register Transparent Print device (%d)\n", rc));
-			return(rc);
+			return rc;
 		}
 		brd->dgnc_Major_TransparentPrint_Registered = TRUE;
 	}
@@ -331,7 +301,7 @@
 
 	DPR_INIT(("DGNC REGISTER TTY: MAJOR: %d\n", brd->SerialDriver.major));
 
-	return (rc);
+	return rc;
 }
 
 
@@ -341,14 +311,14 @@
  * Init the tty subsystem.  Called once per board after board has been
  * downloaded and init'ed.
  */
-int dgnc_tty_init(struct board_t *brd)
+int dgnc_tty_init(struct dgnc_board *brd)
 {
 	int i;
 	void __iomem *vaddr;
 	struct channel_t *ch;
 
 	if (!brd)
-		return (-ENXIO);
+		return -ENXIO;
 
 	DPR_INIT(("dgnc_tty_init start\n"));
 
@@ -371,7 +341,7 @@
 			 * Okay to malloc with GFP_KERNEL, we are not at
 			 * interrupt context, and there are no locks held.
 			 */
-			brd->channels[i] = kzalloc(sizeof(struct channel_t), GFP_KERNEL);
+			brd->channels[i] = kzalloc(sizeof(*brd->channels[i]), GFP_KERNEL);
 			if (!brd->channels[i]) {
 				DPR_CORE(("%s:%d Unable to allocate memory for channel struct\n",
 				    __FILE__, __LINE__));
@@ -436,7 +406,7 @@
 
 	DPR_INIT(("dgnc_tty_init finish\n"));
 
-	return (0);
+	return 0;
 }
 
 
@@ -460,7 +430,7 @@
  * Uninitialize the TTY portion of this driver.  Free all memory and
  * resources.
  */
-void dgnc_tty_uninit(struct board_t *brd)
+void dgnc_tty_uninit(struct dgnc_board *brd)
 {
 	int i = 0;
 
@@ -550,7 +520,7 @@
 		/*
 		 *  Loop while data remains.
 		 */
-		while (nbuf > 0 && ch->ch_sniff_buf != 0) {
+		while (nbuf > 0 && ch->ch_sniff_buf) {
 			/*
 			 *  Determine the amount of available space left in the
 			 *  buffer.  If there's none, wait until some appears.
@@ -671,7 +641,7 @@
  *=======================================================================*/
 void dgnc_input(struct channel_t *ch)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct tty_struct *tp;
 	struct tty_ldisc *ld;
 	uint	rmask;
@@ -867,7 +837,7 @@
  ************************************************************************/
 void dgnc_carrier(struct channel_t *ch)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 
 	int virt_carrier = 0;
 	int phys_carrier = 0;
@@ -1158,7 +1128,6 @@
 	}
 
 	if (ch->ch_tun.un_flags & UN_ISOPEN) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
 		if ((ch->ch_tun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
 			ch->ch_tun.un_tty->ldisc->ops->write_wakeup)
 		{
@@ -1166,15 +1135,6 @@
 			(ch->ch_tun.un_tty->ldisc->ops->write_wakeup)(ch->ch_tun.un_tty);
 			DGNC_LOCK(ch->ch_lock, lock_flags);
 		}
-#else
-		if ((ch->ch_tun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-			ch->ch_tun.un_tty->ldisc.ops->write_wakeup)
-		{
-			DGNC_UNLOCK(ch->ch_lock, lock_flags);
-			(ch->ch_tun.un_tty->ldisc.ops->write_wakeup)(ch->ch_tun.un_tty);
-			DGNC_LOCK(ch->ch_lock, lock_flags);
-		}
-#endif
 
 		wake_up_interruptible(&ch->ch_tun.un_tty->write_wait);
 
@@ -1210,7 +1170,6 @@
 	}
 
 	if (ch->ch_pun.un_flags & UN_ISOPEN) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
 		if ((ch->ch_pun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
 			ch->ch_pun.un_tty->ldisc->ops->write_wakeup)
 		{
@@ -1218,15 +1177,6 @@
 			(ch->ch_pun.un_tty->ldisc->ops->write_wakeup)(ch->ch_pun.un_tty);
 			DGNC_LOCK(ch->ch_lock, lock_flags);
 		}
-#else
-		if ((ch->ch_pun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-			ch->ch_pun.un_tty->ldisc.ops->write_wakeup)
-		{
-			DGNC_UNLOCK(ch->ch_lock, lock_flags);
-			(ch->ch_pun.un_tty->ldisc.ops->write_wakeup)(ch->ch_pun.un_tty);
-			DGNC_LOCK(ch->ch_lock, lock_flags);
-		}
-#endif
 
 		wake_up_interruptible(&ch->ch_pun.un_tty->write_wait);
 
@@ -1260,7 +1210,7 @@
  */
 static int dgnc_tty_open(struct tty_struct *tty, struct file *file)
 {
-	struct board_t	*brd;
+	struct dgnc_board	*brd;
 	struct channel_t *ch;
 	struct un_t	*un;
 	uint		major = 0;
@@ -1473,7 +1423,7 @@
 	DGNC_UNLOCK(ch->ch_lock, lock_flags);
 
 	DPR_OPEN(("dgnc_tty_open finished\n"));
-	return (rc);
+	return rc;
 }
 
 
@@ -1491,12 +1441,12 @@
 	int	sleep_on_un_flags = 0;
 
 	if (!tty || tty->magic != TTY_MAGIC || !file || !ch || ch->magic != DGNC_CHANNEL_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC) {
-		return (-ENXIO);
+		return -ENXIO;
 	}
 
 	DPR_OPEN(("dgnc_block_til_ready - before block.\n"));
@@ -1624,12 +1574,12 @@
 
 	if (retval) {
 		DPR_OPEN(("dgnc_block_til_ready - done. error. retval: %x\n", retval));
-		return(retval);
+		return retval;
 	}
 
 	DPR_OPEN(("dgnc_block_til_ready - done no error. jiffies: %lu\n", jiffies));
 
-	return(0);
+	return 0;
 }
 
 
@@ -1667,7 +1617,7 @@
 static void dgnc_tty_close(struct tty_struct *tty, struct file *file)
 {
 	struct ktermios *ts;
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	ulong lock_flags;
@@ -1843,15 +1793,15 @@
 	ulong   lock_flags = 0;
 
 	if (tty == NULL)
-		return(0);
+		return 0;
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 
 	DGNC_LOCK(ch->ch_lock, lock_flags);
 
@@ -1873,7 +1823,7 @@
 	DPR_WRITE(("dgnc_tty_chars_in_buffer. Port: %x - %d (head: %d tail: %d)\n",
 		ch->ch_portnum, chars, thead, ttail));
 
-	return(chars);
+	return chars;
 }
 
 
@@ -1891,22 +1841,22 @@
 	struct un_t *un = NULL;
 
 	if (!tty)
-		return (bytes_available);
+		return bytes_available;
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (bytes_available);
+		return bytes_available;
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (bytes_available);
+		return bytes_available;
 
 	/*
 	 * If its not the Transparent print device, return
 	 * the full data amount.
 	 */
 	if (un->un_type != DGNC_PRINT)
-		return (bytes_available);
+		return bytes_available;
 
 	if (ch->ch_digi.digi_maxcps > 0 && ch->ch_digi.digi_bufsize > 0 ) {
 		int cps_limit = 0;
@@ -1931,7 +1881,7 @@
 		bytes_available = min(cps_limit, bytes_available);
 	}
 
-	return (bytes_available);
+	return bytes_available;
 }
 
 
@@ -1951,15 +1901,15 @@
 	ulong   lock_flags = 0;
 
 	if (tty == NULL || dgnc_TmpWriteBuf == NULL)
-		return(0);
+		return 0;
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (0);
+		return 0;
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (0);
+		return 0;
 
 	DGNC_LOCK(ch->ch_lock, lock_flags);
 
@@ -1994,7 +1944,7 @@
 
 	DPR_WRITE(("dgnc_tty_write_room - %d tail: %d head: %d\n", ret, tail, head));
 
-	return(ret);
+	return ret;
 }
 
 
@@ -2037,18 +1987,18 @@
 	int from_user = 0;
 
 	if (tty == NULL || dgnc_TmpWriteBuf == NULL)
-		return(0);
+		return 0;
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return(0);
+		return 0;
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return(0);
+		return 0;
 
 	if (!count)
-		return(0);
+		return 0;
 
 	DPR_WRITE(("dgnc_tty_write: Port: %x tty=%p user=%d len=%d\n",
 		ch->ch_portnum, tty, from_user, count));
@@ -2090,7 +2040,7 @@
 	 */
 	if (count <= 0) {
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(0);
+		return 0;
 	}
 
 	/*
@@ -2120,7 +2070,7 @@
 	 */
 	if (count <= 0) {
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(0);
+		return 0;
 	}
 
 	if (from_user) {
@@ -2136,7 +2086,7 @@
 		 */
 		/* we're allowed to block if it's from_user */
 		if (down_interruptible(&dgnc_TmpWriteSem)) {
-			return (-EINTR);
+			return -EINTR;
 		}
 
 		/*
@@ -2147,7 +2097,7 @@
 
 		if (!count) {
 			up(&dgnc_TmpWriteSem);
-			return(-EFAULT);
+			return -EFAULT;
 		}
 
 		DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -2229,18 +2179,15 @@
 		ch->ch_bd->bd_ops->copy_data_from_queue_to_uart(ch);
 	}
 
-	return (count);
+	return count;
 }
 
 
 /*
  * Return modem signals to ld.
  */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
+
 static int dgnc_tty_tiocmget(struct tty_struct *tty)
-#else
-static int dgnc_tty_tiocmget(struct tty_struct *tty, struct file *file)
-#endif
 {
 	struct channel_t *ch;
 	struct un_t *un;
@@ -2293,15 +2240,11 @@
  *
  * Set modem signals, called by ld.
  */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
+
 static int dgnc_tty_tiocmset(struct tty_struct *tty,
 		unsigned int set, unsigned int clear)
-#else
-static int dgnc_tty_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
-#endif
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	int ret = -EIO;
@@ -2349,7 +2292,7 @@
 
 	DPR_IOCTL(("dgnc_tty_tiocmset finish\n"));
 
-	return (0);
+	return 0;
 }
 
 
@@ -2360,7 +2303,7 @@
  */
 static int dgnc_tty_send_break(struct tty_struct *tty, int msec)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	int ret = -EIO;
@@ -2402,7 +2345,7 @@
 
 	DPR_IOCTL(("dgnc_tty_send_break finish\n"));
 
-	return (0);
+	return 0;
 
 }
 
@@ -2414,7 +2357,7 @@
  */
 static void dgnc_tty_wait_until_sent(struct tty_struct *tty, int timeout)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	int rc;
@@ -2450,7 +2393,7 @@
  */
 static void dgnc_tty_send_xchar(struct tty_struct *tty, char c)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	ulong   lock_flags;
@@ -2497,7 +2440,7 @@
 	DPR_IOCTL(("dgnc_getmstat start\n"));
 
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return(-ENXIO);
+		return -ENXIO;
 
 	DGNC_LOCK(ch->ch_lock, lock_flags);
 
@@ -2522,7 +2465,7 @@
 
 	DPR_IOCTL(("dgnc_getmstat finish\n"));
 
-	return(result);
+	return result;
 }
 
 
@@ -2538,17 +2481,17 @@
 	DPR_IOCTL(("dgnc_get_modem_info start\n"));
 
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return(-ENXIO);
+		return -ENXIO;
 
 	result = dgnc_get_mstat(ch);
 
 	if (result < 0)
-		return (-ENXIO);
+		return -ENXIO;
 
 	rc = put_user(result, value);
 
 	DPR_IOCTL(("dgnc_get_modem_info finish\n"));
-	return(rc);
+	return rc;
 }
 
 
@@ -2559,7 +2502,7 @@
  */
 static int dgnc_set_modem_info(struct tty_struct *tty, unsigned int command, unsigned int __user *value)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	int ret = -ENXIO;
@@ -2587,7 +2530,7 @@
 
 	ret = get_user(arg, value);
 	if (ret)
-		return(ret);
+		return ret;
 
 	switch (command) {
 	case TIOCMBIS:
@@ -2631,7 +2574,7 @@
 		break;
 
 	default:
-		return(-EINVAL);
+		return -EINVAL;
 	}
 
 	DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -2642,7 +2585,7 @@
 
 	DPR_IOCTL(("dgnc_set_modem_info finish\n"));
 
-	return (0);
+	return 0;
 }
 
 
@@ -2662,18 +2605,18 @@
 	ulong   lock_flags;
 
 	if (!retinfo)
-		return (-EFAULT);
+		return -EFAULT;
 
 	if (!tty || tty->magic != TTY_MAGIC)
-		return (-EFAULT);
+		return -EFAULT;
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (-EFAULT);
+		return -EFAULT;
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (-EFAULT);
+		return -EFAULT;
 
 	memset(&tmp, 0, sizeof(tmp));
 
@@ -2682,9 +2625,9 @@
 	DGNC_UNLOCK(ch->ch_lock, lock_flags);
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-		return (-EFAULT);
+		return -EFAULT;
 
-	return (0);
+	return 0;
 }
 
 
@@ -2698,7 +2641,7 @@
  */
 static int dgnc_tty_digiseta(struct tty_struct *tty, struct digi_t __user *new_info)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	struct digi_t new_digi;
@@ -2707,23 +2650,23 @@
 	DPR_IOCTL(("DIGI_SETA start\n"));
 
 	if (!tty || tty->magic != TTY_MAGIC)
-		return (-EFAULT);
+		return -EFAULT;
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (-EFAULT);
+		return -EFAULT;
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (-EFAULT);
+		return -EFAULT;
 
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (-EFAULT);
+		return -EFAULT;
 
-	if (copy_from_user(&new_digi, new_info, sizeof(struct digi_t))) {
+	if (copy_from_user(&new_digi, new_info, sizeof(new_digi))) {
 		DPR_IOCTL(("DIGI_SETA failed copy_from_user\n"));
-		return(-EFAULT);
+		return -EFAULT;
 	}
 
 	DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -2744,7 +2687,7 @@
 	if ((ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) && !(new_digi.digi_flags & DIGI_DTR_TOGGLE))
 		ch->ch_mostat |= (UART_MCR_DTR);
 
-	memcpy(&ch->ch_digi, &new_digi, sizeof(struct digi_t));
+	memcpy(&ch->ch_digi, &new_digi, sizeof(new_digi));
 
 	if (ch->ch_digi.digi_maxcps < 1)
 		ch->ch_digi.digi_maxcps = 1;
@@ -2773,7 +2716,7 @@
 
 	DPR_IOCTL(("DIGI_SETA finish\n"));
 
-	return(0);
+	return 0;
 }
 
 
@@ -2782,7 +2725,7 @@
  */
 static void dgnc_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	unsigned long lock_flags;
@@ -2878,7 +2821,7 @@
 
 static void dgnc_tty_start(struct tty_struct *tty)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	ulong lock_flags;
@@ -2912,7 +2855,7 @@
 
 static void dgnc_tty_stop(struct tty_struct *tty)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	ulong lock_flags;
@@ -2959,7 +2902,7 @@
  */
 static void dgnc_tty_flush_chars(struct tty_struct *tty)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	ulong lock_flags;
@@ -3056,7 +2999,7 @@
 static int dgnc_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
 		unsigned long arg)
 {
-	struct board_t *bd;
+	struct dgnc_board *bd;
 	struct channel_t *ch;
 	struct un_t *un;
 	int rc;
@@ -3064,19 +3007,19 @@
 	void __user *uarg = (void __user *) arg;
 
 	if (!tty || tty->magic != TTY_MAGIC)
-		return (-ENODEV);
+		return -ENODEV;
 
 	un = tty->driver_data;
 	if (!un || un->magic != DGNC_UNIT_MAGIC)
-		return (-ENODEV);
+		return -ENODEV;
 
 	ch = un->un_ch;
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return (-ENODEV);
+		return -ENODEV;
 
 	bd = ch->ch_bd;
 	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
-		return (-ENODEV);
+		return -ENODEV;
 
 	DPR_IOCTL(("dgnc_tty_ioctl start on port %d - cmd %s (%x), arg %lx\n",
 		ch->ch_portnum, dgnc_ioctl_name(cmd), cmd, arg));
@@ -3086,7 +3029,7 @@
 	if (un->un_open_count <= 0) {
 		DPR_BASIC(("dgnc_tty_ioctl - unit not open.\n"));
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(-EIO);
+		return -EIO;
 	}
 
 	switch (cmd) {
@@ -3105,14 +3048,14 @@
 		rc = tty_check_change(tty);
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		if (rc) {
-			return(rc);
+			return rc;
 		}
 
 		rc = ch->ch_bd->bd_ops->drain(tty, 0);
 
 		if (rc) {
 			DPR_IOCTL(("dgnc_tty_ioctl - bad return: %d ", rc));
-			return(-EINTR);
+			return -EINTR;
 		}
 
 		DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -3126,7 +3069,7 @@
 		DPR_IOCTL(("dgnc_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
 			ch->ch_portnum, dgnc_ioctl_name(cmd), cmd, arg));
 
-		return(0);
+		return 0;
 
 
 	case TCSBRKP:
@@ -3138,13 +3081,13 @@
 		rc = tty_check_change(tty);
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		if (rc) {
-			return(rc);
+			return rc;
 		}
 
 		rc = ch->ch_bd->bd_ops->drain(tty, 0);
 		if (rc) {
 			DPR_IOCTL(("dgnc_tty_ioctl - bad return: %d ", rc));
-			return(-EINTR);
+			return -EINTR;
 		}
 
 		DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -3156,19 +3099,19 @@
 		DPR_IOCTL(("dgnc_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
 			ch->ch_portnum, dgnc_ioctl_name(cmd), cmd, arg));
 
-		return(0);
+		return 0;
 
 	case TIOCSBRK:
 		rc = tty_check_change(tty);
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		if (rc) {
-			return(rc);
+			return rc;
 		}
 
 		rc = ch->ch_bd->bd_ops->drain(tty, 0);
 		if (rc) {
 			DPR_IOCTL(("dgnc_tty_ioctl - bad return: %d ", rc));
-			return(-EINTR);
+			return -EINTR;
 		}
 
 		DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -3180,7 +3123,7 @@
 		DPR_IOCTL(("dgnc_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
 			ch->ch_portnum, dgnc_ioctl_name(cmd), cmd, arg));
 
-		return(0);
+		return 0;
 
 	case TIOCCBRK:
 		/* Do Nothing */
@@ -3192,31 +3135,31 @@
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 
 		rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) arg);
-		return(rc);
+		return rc;
 
 	case TIOCSSOFTCAR:
 
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		rc = get_user(arg, (unsigned long __user *) arg);
 		if (rc)
-			return(rc);
+			return rc;
 
 		DGNC_LOCK(ch->ch_lock, lock_flags);
 		tty->termios.c_cflag = ((tty->termios.c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
 		ch->ch_bd->bd_ops->param(tty);
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 
-		return(0);
+		return 0;
 
 	case TIOCMGET:
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(dgnc_get_modem_info(ch, uarg));
+		return dgnc_get_modem_info(ch, uarg);
 
 	case TIOCMBIS:
 	case TIOCMBIC:
 	case TIOCMSET:
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(dgnc_set_modem_info(tty, cmd, uarg));
+		return dgnc_set_modem_info(tty, cmd, uarg);
 
 		/*
 		 * Here are any additional ioctl's that we want to implement
@@ -3235,7 +3178,7 @@
 		rc = tty_check_change(tty);
 		if (rc) {
 			DGNC_UNLOCK(ch->ch_lock, lock_flags);
-			return(rc);
+			return rc;
 		}
 
 		if ((arg == TCIFLUSH) || (arg == TCIOFLUSH)) {
@@ -3265,7 +3208,7 @@
 
 		/* pretend we didn't recognize this IOCTL */
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(-ENOIOCTLCMD);
+		return -ENOIOCTLCMD;
 	case TCSETSF:
 	case TCSETSW:
 		/*
@@ -3291,14 +3234,14 @@
 		rc = ch->ch_bd->bd_ops->drain(tty, 0);
 		if (rc) {
 			DPR_IOCTL(("dgnc_tty_ioctl - bad return: %d\n", rc));
-			return(-EINTR);
+			return -EINTR;
 		}
 
 		DPR_IOCTL(("dgnc_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
 			ch->ch_portnum, dgnc_ioctl_name(cmd), cmd, arg));
 
 		/* pretend we didn't recognize this */
-		return(-ENOIOCTLCMD);
+		return -ENOIOCTLCMD;
 
 	case TCSETAW:
 
@@ -3306,21 +3249,21 @@
 		rc = ch->ch_bd->bd_ops->drain(tty, 0);
 		if (rc) {
 			DPR_IOCTL(("dgnc_tty_ioctl - bad return: %d ", rc));
-			return(-EINTR);
+			return -EINTR;
 		}
 
 		/* pretend we didn't recognize this */
-		return(-ENOIOCTLCMD);
+		return -ENOIOCTLCMD;
 
 	case TCXONC:
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		/* Make the ld do it */
-		return(-ENOIOCTLCMD);
+		return -ENOIOCTLCMD;
 
 	case DIGI_GETA:
 		/* get information for ditty */
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(dgnc_tty_digigeta(tty, uarg));
+		return dgnc_tty_digigeta(tty, uarg);
 
 	case DIGI_SETAW:
 	case DIGI_SETAF:
@@ -3332,7 +3275,7 @@
 			rc = ch->ch_bd->bd_ops->drain(tty, 0);
 			if (rc) {
 				DPR_IOCTL(("dgnc_tty_ioctl - bad return: %d ", rc));
-				return(-EINTR);
+				return -EINTR;
 			}
 			DGNC_LOCK(ch->ch_lock, lock_flags);
 		}
@@ -3343,7 +3286,7 @@
 
 	case DIGI_SETA:
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(dgnc_tty_digiseta(tty, uarg));
+		return dgnc_tty_digiseta(tty, uarg);
 
 	case DIGI_LOOPBACK:
 		{
@@ -3352,7 +3295,7 @@
 			DGNC_UNLOCK(ch->ch_lock, lock_flags);
 			rc = get_user(loopback, (unsigned int __user *) arg);
 			if (rc)
-				return(rc);
+				return rc;
 			DGNC_LOCK(ch->ch_lock, lock_flags);
 
 			/* Enable/disable internal loopback for this port */
@@ -3363,13 +3306,13 @@
 
 			ch->ch_bd->bd_ops->param(tty);
 			DGNC_UNLOCK(ch->ch_lock, lock_flags);
-			return(0);
+			return 0;
 		}
 
 	case DIGI_GETCUSTOMBAUD:
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		rc = put_user(ch->ch_custom_speed, (unsigned int __user *) arg);
-		return(rc);
+		return rc;
 
 	case DIGI_SETCUSTOMBAUD:
 	{
@@ -3378,12 +3321,12 @@
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		rc = get_user(new_rate, (unsigned int __user *) arg);
 		if (rc)
-			return(rc);
+			return rc;
 		DGNC_LOCK(ch->ch_lock, lock_flags);
 		dgnc_set_custom_speed(ch, new_rate);
 		ch->ch_bd->bd_ops->param(tty);
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(0);
+		return 0;
 	}
 
 	/*
@@ -3399,11 +3342,11 @@
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		rc = get_user(c, (unsigned char __user *) arg);
 		if (rc)
-			return(rc);
+			return rc;
 		DGNC_LOCK(ch->ch_lock, lock_flags);
 		ch->ch_bd->bd_ops->send_immediate_char(ch, c);
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
-		return(0);
+		return 0;
 	}
 
 	/*
@@ -3426,10 +3369,10 @@
 
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 
-		if (copy_to_user(uarg, &buf, sizeof(struct digi_getcounter))) {
-			return (-EFAULT);
+		if (copy_to_user(uarg, &buf, sizeof(buf))) {
+			return -EFAULT;
 		}
-		return(0);
+		return 0;
 	}
 
 	/*
@@ -3454,7 +3397,7 @@
 
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 		rc = put_user(events, (unsigned int __user *) arg);
-		return(rc);
+		return rc;
 	}
 
 	/*
@@ -3474,8 +3417,8 @@
 		/*
 		 * Get data from user first.
 		 */
-		if (copy_from_user(&buf, uarg, sizeof(struct digi_getbuffer))) {
-			return (-EFAULT);
+		if (copy_from_user(&buf, uarg, sizeof(buf))) {
+			return -EFAULT;
 		}
 
 		DGNC_LOCK(ch->ch_lock, lock_flags);
@@ -3520,10 +3463,10 @@
 
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
 
-		if (copy_to_user(uarg, &buf, sizeof(struct digi_getbuffer))) {
-			return (-EFAULT);
+		if (copy_to_user(uarg, &buf, sizeof(buf))) {
+			return -EFAULT;
 		}
-		return(0);
+		return 0;
 	}
 	default:
 		DGNC_UNLOCK(ch->ch_lock, lock_flags);
@@ -3532,7 +3475,7 @@
 		DPR_IOCTL(("dgnc_tty_ioctl end - cmd %s (%x), arg %lx\n",
 			dgnc_ioctl_name(cmd), cmd, arg));
 
-		return(-ENOIOCTLCMD);
+		return -ENOIOCTLCMD;
 	}
 
 	DGNC_UNLOCK(ch->ch_lock, lock_flags);
@@ -3540,5 +3483,5 @@
 	DPR_IOCTL(("dgnc_tty_ioctl end - cmd %s (%x), arg %lx\n",
 		dgnc_ioctl_name(cmd), cmd, arg));
 
-	return(0);
+	return 0;
 }
diff --git a/drivers/staging/dgnc/dgnc_tty.h b/drivers/staging/dgnc/dgnc_tty.h
index deb388d..9d1c284 100644
--- a/drivers/staging/dgnc/dgnc_tty.h
+++ b/drivers/staging/dgnc/dgnc_tty.h
@@ -24,13 +24,13 @@
 
 #include "dgnc_driver.h"
 
-int	dgnc_tty_register(struct board_t *brd);
+int	dgnc_tty_register(struct dgnc_board *brd);
 
 int	dgnc_tty_preinit(void);
-int     dgnc_tty_init(struct board_t *);
+int     dgnc_tty_init(struct dgnc_board *);
 
 void	dgnc_tty_post_uninit(void);
-void	dgnc_tty_uninit(struct board_t *);
+void	dgnc_tty_uninit(struct dgnc_board *);
 
 void	dgnc_input(struct channel_t *ch);
 void	dgnc_carrier(struct channel_t *ch);
diff --git a/drivers/staging/dgnc/digi.h b/drivers/staging/dgnc/digi.h
index eb6e371..6a9adf6 100644
--- a/drivers/staging/dgnc/digi.h
+++ b/drivers/staging/dgnc/digi.h
@@ -201,9 +201,9 @@
 	unsigned int	shrink_buf_vaddr;	/* Virtual address of board */
 	unsigned int	shrink_buf_phys;	/* Physical address of board */
 	unsigned int	shrink_buf_bseg;	/* Amount of board memory */
-	unsigned int	shrink_buf_hseg;	/* '186 Begining of Dual-Port */
+	unsigned int	shrink_buf_hseg;	/* '186 Beginning of Dual-Port */
 
-	unsigned int	shrink_buf_lseg;	/* '186 Begining of freed memory */
+	unsigned int	shrink_buf_lseg;	/* '186 Beginning of freed memory */
 	unsigned int	shrink_buf_mseg;	/* Linear address from start of
 						   dual-port were freed memory
 						   begins, host viewpoint. */
diff --git a/drivers/staging/dgrp/dgrp_sysfs.c b/drivers/staging/dgrp/dgrp_sysfs.c
index 8cee9c8..9a18a2c 100644
--- a/drivers/staging/dgrp/dgrp_sysfs.c
+++ b/drivers/staging/dgrp/dgrp_sysfs.c
@@ -157,7 +157,7 @@
 
 	if (!c)
 		return 0;
-	nd = (struct nd_struct *) dev_get_drvdata(c);
+	nd = dev_get_drvdata(c);
 	if (!nd)
 		return 0;
 
@@ -174,7 +174,7 @@
 
 	if (!c)
 		return 0;
-	nd = (struct nd_struct *) dev_get_drvdata(c);
+	nd = dev_get_drvdata(c);
 	if (!nd)
 		return 0;
 
@@ -192,7 +192,7 @@
 
 	if (!c)
 		return 0;
-	nd = (struct nd_struct *) dev_get_drvdata(c);
+	nd = dev_get_drvdata(c);
 	if (!nd)
 		return 0;
 
@@ -212,7 +212,7 @@
 
 	if (!c)
 		return 0;
-	nd = (struct nd_struct *) dev_get_drvdata(c);
+	nd = dev_get_drvdata(c);
 	if (!nd)
 		return 0;
 
@@ -232,7 +232,7 @@
 	if (!c)
 		return 0;
 
-	nd = (struct nd_struct *) dev_get_drvdata(c);
+	nd = dev_get_drvdata(c);
 	if (!nd)
 		return 0;
 
@@ -311,7 +311,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 
@@ -328,7 +328,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -348,7 +348,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -377,7 +377,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -396,7 +396,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -415,7 +415,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -434,7 +434,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -453,7 +453,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -472,7 +472,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
@@ -493,7 +493,7 @@
 
 	if (!d)
 		return 0;
-	un = (struct un_struct *) dev_get_drvdata(d);
+	un = dev_get_drvdata(d);
 	if (!un)
 		return 0;
 	ch = un->un_ch;
diff --git a/drivers/staging/dwc2/TODO b/drivers/staging/dwc2/TODO
new file mode 100644
index 0000000..282470d
--- /dev/null
+++ b/drivers/staging/dwc2/TODO
@@ -0,0 +1,33 @@
+TODO:
+	- Dan Carpenter would like to see some cleanups to the microframe
+	  scheduler code:
+	  http://www.mail-archive.com/linux-usb@vger.kernel.org/msg26650.html
+
+	- Should merge the NAK holdoff patch from Raspberry Pi
+	  (http://marc.info/?l=linux-usb&m=137625067103833). But as it stands
+	  that patch is incomplete, it needs more investigation to see if it
+	  can be made to work for non-Raspberry Pi platforms that lack the
+	  special FIQ interrupt that the Pi has. Without this patch, the driver
+	  has a high interrupt rate (8K/sec).
+
+	- The Raspberry Pi platform needs to have support for its FIQ interrupt
+	  added, to get the same level of functionality as the downstream
+	  driver. The raspberrypi.org developers have indicated they are
+	  willing to help with that.
+
+	- Some of the default driver parameters (see 'struct dwc2_core_params'
+	  in core.h) won't work for many platforms. So DT attributes will need
+	  to be added for some of these. But that can be done as-needed as new
+	  platforms are added.
+
+	- Eventually the driver should be merged with the s3c-hsotg peripheral
+	  mode driver, so that both modes of operation can be supported with a
+	  single driver. But I think that can wait till after the driver has
+	  been moved to mainline.
+
+	- After that, OTG support can be added. I'm not sure how much demand
+	  there is for that, though, so I have that as a low priority.
+
+Please send any patches for this driver to Paul Zimmerman <paulz@synopsys.com>
+and Greg Kroah-Hartman <gregkh@linuxfoundation.org>. And please CC linux-usb
+<linux-usb@vger.kernel.org> too.
diff --git a/drivers/staging/dwc2/core.c b/drivers/staging/dwc2/core.c
index 06dae67..6d001b5 100644
--- a/drivers/staging/dwc2/core.c
+++ b/drivers/staging/dwc2/core.c
@@ -564,7 +564,7 @@
 
 	/*
 	 * This bit allows dynamic reloading of the HFIR register during
-	 * runtime. This bit needs to be programmed during inital configuration
+	 * runtime. This bit needs to be programmed during initial configuration
 	 * and its value must not be changed during runtime.
 	 */
 	if (hsotg->core_params->reload_ctl > 0) {
@@ -2205,7 +2205,7 @@
 {
 #ifndef NO_FS_PHY_HW_CHECKS
 	int valid = 0;
-        u32 hs_phy_type, fs_phy_type;
+	u32 hs_phy_type, fs_phy_type;
 #endif
 	int retval = 0;
 
@@ -2553,7 +2553,7 @@
 		hsotg->core_params->ahbcfg = val;
 	else
 		hsotg->core_params->ahbcfg = GAHBCFG_HBSTLEN_INCR4 <<
-                                             GAHBCFG_HBSTLEN_SHIFT;
+						GAHBCFG_HBSTLEN_SHIFT;
 	return 0;
 }
 
@@ -2736,6 +2736,26 @@
 	return 0;
 }
 
+int dwc2_set_param_uframe_sched(struct dwc2_hsotg *hsotg, int val)
+{
+	int retval = 0;
+
+	if (DWC2_PARAM_TEST(val, 0, 1)) {
+		if (val >= 0) {
+			dev_err(hsotg->dev,
+				"'%d' invalid for parameter uframe_sched\n",
+				val);
+			dev_err(hsotg->dev, "uframe_sched must be 0 or 1\n");
+		}
+		val = 1;
+		dev_dbg(hsotg->dev, "Setting uframe_sched to %d\n", val);
+		retval = -EINVAL;
+	}
+
+	hsotg->core_params->uframe_sched = val;
+	return retval;
+}
+
 /*
  * This function is called during module intialization to pass module parameters
  * for the DWC_otg core. It returns non-0 if any parameters are invalid.
@@ -2782,6 +2802,7 @@
 	retval |= dwc2_set_param_reload_ctl(hsotg, params->reload_ctl);
 	retval |= dwc2_set_param_ahbcfg(hsotg, params->ahbcfg);
 	retval |= dwc2_set_param_otg_ver(hsotg, params->otg_ver);
+	retval |= dwc2_set_param_uframe_sched(hsotg, params->uframe_sched);
 
 	return retval;
 }
diff --git a/drivers/staging/dwc2/core.h b/drivers/staging/dwc2/core.h
index 9102f66..fab718d 100644
--- a/drivers/staging/dwc2/core.h
+++ b/drivers/staging/dwc2/core.h
@@ -188,6 +188,7 @@
  *                      bits defined by GAHBCFG_CTRL_MASK are controlled
  *                      by the driver and are ignored in this
  *                      configuration value.
+ * @uframe_sched:       True to enable the microframe scheduler
  *
  * The following parameters may be specified when starting the module. These
  * parameters define how the DWC_otg controller should be configured. A
@@ -224,6 +225,7 @@
 	int ts_dline;
 	int reload_ctl;
 	int ahbcfg;
+	int uframe_sched;
 };
 
 /**
@@ -292,7 +294,7 @@
 	unsigned dev_token_q_depth:5;
 	unsigned max_transfer_size:26;
 	unsigned max_packet_count:11;
-	unsigned host_channels:4;
+	unsigned host_channels:5;
 	unsigned hs_phy_type:2;
 	unsigned fs_phy_type:2;
 	unsigned i2c_enable:1;
@@ -370,6 +372,7 @@
  *                      This value is in microseconds per (micro)frame. The
  *                      assumption is that all periodic transfers may occur in
  *                      the same (micro)frame.
+ * @frame_usecs:        Internal variable used by the microframe scheduler
  * @frame_number:       Frame number read from the core at SOF. The value ranges
  *                      from 0 to HFNUM_MAX_FRNUM.
  * @periodic_qh_count:  Count of periodic QHs, if using several eps. Used for
@@ -382,6 +385,8 @@
  *                      host channel is available for non-periodic transactions.
  * @non_periodic_channels: Number of host channels assigned to non-periodic
  *                      transfers
+ * @available_host_channels Number of host channels available for the microframe
+ *                      scheduler to use
  * @hc_ptr_array:       Array of pointers to the host channel descriptors.
  *                      Allows accessing a host channel descriptor given the
  *                      host channel number. This is useful in interrupt
@@ -436,6 +441,7 @@
 	struct list_head periodic_sched_assigned;
 	struct list_head periodic_sched_queued;
 	u16 periodic_usecs;
+	u16 frame_usecs[8];
 	u16 frame_number;
 	u16 periodic_qh_count;
 
@@ -451,6 +457,7 @@
 	struct list_head free_hc_list;
 	int periodic_channels;
 	int non_periodic_channels;
+	int available_host_channels;
 	struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS];
 	u8 *status_buf;
 	dma_addr_t status_buf_dma;
diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c
index da0d35c..3cfd2d5 100644
--- a/drivers/staging/dwc2/hcd.c
+++ b/drivers/staging/dwc2/hcd.c
@@ -537,10 +537,15 @@
 	int i;
 
 	hsotg->flags.d32 = 0;
-
 	hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active;
-	hsotg->non_periodic_channels = 0;
-	hsotg->periodic_channels = 0;
+
+	if (hsotg->core_params->uframe_sched > 0) {
+		hsotg->available_host_channels =
+			hsotg->core_params->host_channels;
+	} else {
+		hsotg->non_periodic_channels = 0;
+		hsotg->periodic_channels = 0;
+	}
 
 	/*
 	 * Put all channels in the free channel list and clean up channel
@@ -716,8 +721,7 @@
  * @qh:    Transactions from the first QTD for this QH are selected and assigned
  *         to a free host channel
  */
-static void dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg,
-				    struct dwc2_qh *qh)
+static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
 	struct dwc2_host_chan *chan;
 	struct dwc2_hcd_urb *urb;
@@ -729,18 +733,18 @@
 
 	if (list_empty(&qh->qtd_list)) {
 		dev_dbg(hsotg->dev, "No QTDs in QH list\n");
-		return;
+		return -ENOMEM;
 	}
 
 	if (list_empty(&hsotg->free_hc_list)) {
 		dev_dbg(hsotg->dev, "No free channel to assign\n");
-		return;
+		return -ENOMEM;
 	}
 
 	chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan,
 				hc_list_entry);
 
-	/* Remove the host channel from the free list */
+	/* Remove host channel from free list */
 	list_del_init(&chan->hc_list_entry);
 
 	qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
@@ -780,6 +784,10 @@
 	chan->data_pid_start = qh->data_toggle;
 	chan->multi_count = 1;
 
+	if (urb->actual_length > urb->length &&
+		!dwc2_hcd_is_pipe_in(&urb->pipe_info))
+		urb->actual_length = urb->length;
+
 	if (hsotg->core_params->dma_enable > 0) {
 		chan->xfer_dma = urb->dma + urb->actual_length;
 
@@ -817,7 +825,7 @@
 				      &hsotg->free_hc_list);
 			qtd->in_process = 0;
 			qh->channel = NULL;
-			return;
+			return -ENOMEM;
 		}
 	} else {
 		chan->align_buf = 0;
@@ -836,6 +844,8 @@
 
 	dwc2_hc_init(hsotg, chan);
 	chan->qh = qh;
+
+	return 0;
 }
 
 /**
@@ -864,8 +874,14 @@
 	while (qh_ptr != &hsotg->periodic_sched_ready) {
 		if (list_empty(&hsotg->free_hc_list))
 			break;
+		if (hsotg->core_params->uframe_sched > 0) {
+			if (hsotg->available_host_channels <= 1)
+				break;
+			hsotg->available_host_channels--;
+		}
 		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
-		dwc2_assign_and_init_hc(hsotg, qh);
+		if (dwc2_assign_and_init_hc(hsotg, qh))
+			break;
 
 		/*
 		 * Move the QH from the periodic ready schedule to the
@@ -884,13 +900,21 @@
 	num_channels = hsotg->core_params->host_channels;
 	qh_ptr = hsotg->non_periodic_sched_inactive.next;
 	while (qh_ptr != &hsotg->non_periodic_sched_inactive) {
-		if (hsotg->non_periodic_channels >= num_channels -
+		if (hsotg->core_params->uframe_sched <= 0 &&
+		    hsotg->non_periodic_channels >= num_channels -
 						hsotg->periodic_channels)
 			break;
 		if (list_empty(&hsotg->free_hc_list))
 			break;
 		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
-		dwc2_assign_and_init_hc(hsotg, qh);
+		if (hsotg->core_params->uframe_sched > 0) {
+			if (hsotg->available_host_channels < 1)
+				break;
+			hsotg->available_host_channels--;
+		}
+
+		if (dwc2_assign_and_init_hc(hsotg, qh))
+			break;
 
 		/*
 		 * Move the QH from the non-periodic inactive schedule to the
@@ -905,7 +929,8 @@
 		else
 			ret_val = DWC2_TRANSACTION_ALL;
 
-		hsotg->non_periodic_channels++;
+		if (hsotg->core_params->uframe_sched <= 0)
+			hsotg->non_periodic_channels++;
 	}
 
 	return ret_val;
@@ -2848,6 +2873,9 @@
 		hsotg->hc_ptr_array[i] = channel;
 	}
 
+	if (hsotg->core_params->uframe_sched > 0)
+		dwc2_hcd_init_usecs(hsotg);
+
 	/* Initialize hsotg start work */
 	INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
 
diff --git a/drivers/staging/dwc2/hcd.h b/drivers/staging/dwc2/hcd.h
index cc0a117..89a5484 100644
--- a/drivers/staging/dwc2/hcd.h
+++ b/drivers/staging/dwc2/hcd.h
@@ -238,6 +238,7 @@
  * @interval:           Interval between transfers in (micro)frames
  * @sched_frame:        (Micro)frame to initialize a periodic transfer.
  *                      The transfer executes in the following (micro)frame.
+ * @frame_usecs:        Internal variable used by the microframe scheduler
  * @start_split_frame:  (Micro)frame at which last start split was initialized
  * @ntd:                Actual number of transfer descriptors in a list
  * @dw_align_buf:       Used instead of original buffer if its physical address
@@ -271,6 +272,7 @@
 	u16 usecs;
 	u16 interval;
 	u16 sched_frame;
+	u16 frame_usecs[8];
 	u16 start_split_frame;
 	u16 ntd;
 	u8 *dw_align_buf;
@@ -463,6 +465,7 @@
 
 /* Schedule Queue Functions */
 /* Implemented in hcd_queue.c */
+extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg);
 extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
diff --git a/drivers/staging/dwc2/hcd_ddma.c b/drivers/staging/dwc2/hcd_ddma.c
index 69070f4..c7d4345 100644
--- a/drivers/staging/dwc2/hcd_ddma.c
+++ b/drivers/staging/dwc2/hcd_ddma.c
@@ -271,10 +271,14 @@
 {
 	struct dwc2_host_chan *chan = qh->channel;
 
-	if (dwc2_qh_is_non_per(qh))
-		hsotg->non_periodic_channels--;
-	else
+	if (dwc2_qh_is_non_per(qh)) {
+		if (hsotg->core_params->uframe_sched > 0)
+			hsotg->available_host_channels++;
+		else
+			hsotg->non_periodic_channels--;
+	} else {
 		dwc2_update_frame_list(hsotg, qh, 0);
+	}
 
 	/*
 	 * The condition is added to prevent double cleanup try in case of
@@ -370,7 +374,8 @@
 
 	if ((qh->ep_type == USB_ENDPOINT_XFER_ISOC ||
 	     qh->ep_type == USB_ENDPOINT_XFER_INT) &&
-	    !hsotg->periodic_channels && hsotg->frame_list) {
+	    (hsotg->core_params->uframe_sched > 0 ||
+	     !hsotg->periodic_channels) && hsotg->frame_list) {
 		dwc2_per_sched_disable(hsotg);
 		dwc2_frame_list_free(hsotg);
 	}
diff --git a/drivers/staging/dwc2/hcd_intr.c b/drivers/staging/dwc2/hcd_intr.c
index e143f69..dda1854 100644
--- a/drivers/staging/dwc2/hcd_intr.c
+++ b/drivers/staging/dwc2/hcd_intr.c
@@ -748,18 +748,23 @@
 	dwc2_hc_cleanup(hsotg, chan);
 	list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
 
-	switch (chan->ep_type) {
-	case USB_ENDPOINT_XFER_CONTROL:
-	case USB_ENDPOINT_XFER_BULK:
-		hsotg->non_periodic_channels--;
-		break;
-	default:
-		/*
-		 * Don't release reservations for periodic channels here.
-		 * That's done when a periodic transfer is descheduled (i.e.
-		 * when the QH is removed from the periodic schedule).
-		 */
-		break;
+	if (hsotg->core_params->uframe_sched > 0) {
+		hsotg->available_host_channels++;
+	} else {
+		switch (chan->ep_type) {
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			hsotg->non_periodic_channels--;
+			break;
+		default:
+			/*
+			 * Don't release reservations for periodic channels
+			 * here. That's done when a periodic transfer is
+			 * descheduled (i.e. when the QH is removed from the
+			 * periodic schedule).
+			 */
+			break;
+		}
 	}
 
 	haintmsk = readl(hsotg->regs + HAINTMSK);
@@ -1927,23 +1932,22 @@
 
 	chan = hsotg->hc_ptr_array[chnum];
 
-	if (dbg_hc(chan))
-		dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n",
-			 chnum);
-
 	hcint = readl(hsotg->regs + HCINT(chnum));
 	hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
-	if (dbg_hc(chan))
-		dev_vdbg(hsotg->dev,
-			 "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
-			 hcint, hcintmsk, hcint & hcintmsk);
-
 	if (!chan) {
 		dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
 		writel(hcint, hsotg->regs + HCINT(chnum));
 		return;
 	}
 
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n",
+			 chnum);
+		dev_vdbg(hsotg->dev,
+			 "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
+			 hcint, hcintmsk, hcint & hcintmsk);
+	}
+
 	writel(hcint, hsotg->regs + HCINT(chnum));
 	chan->hcint = hcint;
 	hcint &= hcintmsk;
diff --git a/drivers/staging/dwc2/hcd_queue.c b/drivers/staging/dwc2/hcd_queue.c
index b1980ef..f200f1f 100644
--- a/drivers/staging/dwc2/hcd_queue.c
+++ b/drivers/staging/dwc2/hcd_queue.c
@@ -251,12 +251,12 @@
  *
  * @hsotg: The HCD state structure for the DWC OTG controller
  *
- * Return: 0 if successful, negative error code otherise
+ * Return: 0 if successful, negative error code otherwise
  */
 static int dwc2_periodic_channel_available(struct dwc2_hsotg *hsotg)
 {
 	/*
-	 * Currently assuming that there is a dedicated host channnel for
+	 * Currently assuming that there is a dedicated host channel for
 	 * each periodic transaction plus at least one host channel for
 	 * non-periodic transactions
 	 */
@@ -324,6 +324,146 @@
 }
 
 /**
+ * Microframe scheduler
+ * track the total use in hsotg->frame_usecs
+ * keep each qh use in qh->frame_usecs
+ * when surrendering the qh then donate the time back
+ */
+static const unsigned short max_uframe_usecs[] = {
+	100, 100, 100, 100, 100, 100, 30, 0
+};
+
+void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg)
+{
+	int i;
+
+	for (i = 0; i < 8; i++)
+		hsotg->frame_usecs[i] = max_uframe_usecs[i];
+}
+
+static int dwc2_find_single_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	unsigned short utime = qh->usecs;
+	int done = 0;
+	int i = 0;
+	int ret = -1;
+
+	while (!done) {
+		/* At the start hsotg->frame_usecs[i] = max_uframe_usecs[i] */
+		if (utime <= hsotg->frame_usecs[i]) {
+			hsotg->frame_usecs[i] -= utime;
+			qh->frame_usecs[i] += utime;
+			ret = i;
+			done = 1;
+		} else {
+			i++;
+			if (i == 8)
+				done = 1;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * use this for FS apps that can span multiple uframes
+ */
+static int dwc2_find_multi_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	unsigned short utime = qh->usecs;
+	unsigned short xtime;
+	int t_left = utime;
+	int done = 0;
+	int i = 0;
+	int j;
+	int ret = -1;
+
+	while (!done) {
+		if (hsotg->frame_usecs[i] <= 0) {
+			i++;
+			if (i == 8) {
+				ret = -1;
+				done = 1;
+			}
+			continue;
+		}
+
+		/*
+		 * we need n consecutive slots so use j as a start slot
+		 * j plus j+1 must be enough time (for now)
+		 */
+		xtime = hsotg->frame_usecs[i];
+		for (j = i + 1; j < 8; j++) {
+			/*
+			 * if we add this frame remaining time to xtime we may
+			 * be OK, if not we need to test j for a complete frame
+			 */
+			if (xtime + hsotg->frame_usecs[j] < utime) {
+				if (hsotg->frame_usecs[j] <
+							max_uframe_usecs[j]) {
+					ret = -1;
+					break;
+				}
+			}
+			if (xtime >= utime) {
+				ret = i;
+				break;
+			}
+			/* add the frame time to x time */
+			xtime += hsotg->frame_usecs[j];
+			/* we must have a fully available next frame or break */
+			if (xtime < utime &&
+			   hsotg->frame_usecs[j] == max_uframe_usecs[j]) {
+				ret = -1;
+				break;
+			}
+		}
+		if (ret >= 0) {
+			t_left = utime;
+			for (j = i; t_left > 0 && j < 8; j++) {
+				t_left -= hsotg->frame_usecs[j];
+				if (t_left <= 0) {
+					qh->frame_usecs[j] +=
+						hsotg->frame_usecs[j] + t_left;
+					hsotg->frame_usecs[j] = -t_left;
+					ret = i;
+					done = 1;
+				} else {
+					qh->frame_usecs[j] +=
+						hsotg->frame_usecs[j];
+					hsotg->frame_usecs[j] = 0;
+				}
+			}
+		} else {
+			i++;
+			if (i == 8) {
+				ret = -1;
+				done = 1;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	int ret;
+
+	if (qh->dev_speed == USB_SPEED_HIGH) {
+		/* if this is a hs transaction we need a full frame */
+		ret = dwc2_find_single_uframe(hsotg, qh);
+	} else {
+		/*
+		 * if this is a fs transaction we may need a sequence
+		 * of frames
+		 */
+		ret = dwc2_find_multi_uframe(hsotg, qh);
+	}
+	return ret;
+}
+
+/**
  * dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a
  * host channel is large enough to handle the maximum data transfer in a single
  * (micro)frame for a periodic transfer
@@ -367,15 +507,35 @@
 {
 	int status;
 
-	status = dwc2_periodic_channel_available(hsotg);
-	if (status) {
-		dev_dbg(hsotg->dev,
-			"%s: No host channel available for periodic transfer\n",
-			__func__);
-		return status;
+	if (hsotg->core_params->uframe_sched > 0) {
+		int frame = -1;
+
+		status = dwc2_find_uframe(hsotg, qh);
+		if (status == 0)
+			frame = 7;
+		else if (status > 0)
+			frame = status - 1;
+
+		/* Set the new frame up */
+		if (frame > -1) {
+			qh->sched_frame &= ~0x7;
+			qh->sched_frame |= (frame & 7);
+		}
+
+		if (status != -1)
+			status = 0;
+	} else {
+		status = dwc2_periodic_channel_available(hsotg);
+		if (status) {
+			dev_info(hsotg->dev,
+				 "%s: No host channel available for periodic transfer\n",
+				 __func__);
+			return status;
+		}
+
+		status = dwc2_check_periodic_bandwidth(hsotg, qh);
 	}
 
-	status = dwc2_check_periodic_bandwidth(hsotg, qh);
 	if (status) {
 		dev_dbg(hsotg->dev,
 			"%s: Insufficient periodic bandwidth for periodic transfer\n",
@@ -399,8 +559,9 @@
 		list_add_tail(&qh->qh_list_entry,
 			      &hsotg->periodic_sched_inactive);
 
-	/* Reserve periodic channel */
-	hsotg->periodic_channels++;
+	if (hsotg->core_params->uframe_sched <= 0)
+		/* Reserve periodic channel */
+		hsotg->periodic_channels++;
 
 	/* Update claimed usecs per (micro)frame */
 	hsotg->periodic_usecs += qh->usecs;
@@ -418,13 +579,22 @@
 static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
 				     struct dwc2_qh *qh)
 {
-	list_del_init(&qh->qh_list_entry);
+	int i;
 
-	/* Release periodic channel reservation */
-	hsotg->periodic_channels--;
+	list_del_init(&qh->qh_list_entry);
 
 	/* Update claimed usecs per (micro)frame */
 	hsotg->periodic_usecs -= qh->usecs;
+
+	if (hsotg->core_params->uframe_sched > 0) {
+		for (i = 0; i < 8; i++) {
+			hsotg->frame_usecs[i] += qh->frame_usecs[i];
+			qh->frame_usecs[i] = 0;
+		}
+	} else {
+		/* Release periodic channel reservation */
+		hsotg->periodic_channels--;
+	}
 }
 
 /**
@@ -581,7 +751,10 @@
 			 * Remove from periodic_sched_queued and move to
 			 * appropriate queue
 			 */
-			if (qh->sched_frame == frame_number)
+			if ((hsotg->core_params->uframe_sched > 0 &&
+			     dwc2_frame_num_le(qh->sched_frame, frame_number))
+			 || (hsotg->core_params->uframe_sched <= 0 &&
+			     qh->sched_frame == frame_number))
 				list_move(&qh->qh_list_entry,
 					  &hsotg->periodic_sched_ready);
 			else
diff --git a/drivers/staging/dwc2/pci.c b/drivers/staging/dwc2/pci.c
index 9020260..3d14c88 100644
--- a/drivers/staging/dwc2/pci.c
+++ b/drivers/staging/dwc2/pci.c
@@ -84,6 +84,7 @@
 	.ts_dline			= -1,
 	.reload_ctl			= -1,
 	.ahbcfg				= -1,
+	.uframe_sched			= -1,
 };
 
 /**
diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c
index 44cce2f..76ae6e2 100644
--- a/drivers/staging/dwc2/platform.c
+++ b/drivers/staging/dwc2/platform.c
@@ -106,7 +106,7 @@
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
 		dev_err(&dev->dev, "missing IRQ resource\n");
-		return -EINVAL;
+		return irq;
 	}
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
diff --git a/drivers/staging/et131x/Module.symvers b/drivers/staging/et131x/Module.symvers
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/drivers/staging/et131x/Module.symvers
diff --git a/drivers/staging/et131x/README b/drivers/staging/et131x/README
index 9272a24..8da96a6 100644
--- a/drivers/staging/et131x/README
+++ b/drivers/staging/et131x/README
@@ -11,7 +11,12 @@
 	- Look at reducing the number of spinlocks
 	- Simplify code in nic_rx_pkts(), when determining multicast_pkts_rcvd
 	- Implement NAPI support
-	- in et131x_tx(), don't return NETDEV_TX_BUSY, just drop the packet with	  kfree_skb().
+	- In et131x_tx(), don't return NETDEV_TX_BUSY, just drop the packet with kfree_skb().
+	- Reduce the number of split lines by careful consideration of variable names etc.
+	- Do this in et131x.c:
+                struct fbr_lookup *fbr;
+                fbr = rx_local->fbr[id];
+	  Then replace all the instances of "rx_local->fbr[id]" with fbr.
 
 Please send patches to:
 	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index f73e58f..d9446c4 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -493,11 +493,8 @@
 	spinlock_t send_hw_lock;
 
 	spinlock_t rcv_lock;
-	spinlock_t rcv_pend_lock;
 	spinlock_t fbr_lock;
 
-	spinlock_t phy_lock;
-
 	/* Packet Filter and look ahead size */
 	u32 packet_filter;
 
@@ -2777,10 +2774,9 @@
 		adapter->net_stats.rx_packets++;
 
 		/* Set the status on the packet, either resources or success */
-		if (adapter->rx_ring.num_ready_recv < RFD_LOW_WATER_MARK) {
-			dev_warn(&adapter->pdev->dev,
-				    "RFD's are running out\n");
-		}
+		if (adapter->rx_ring.num_ready_recv < RFD_LOW_WATER_MARK)
+			dev_warn(&adapter->pdev->dev, "RFD's are running out\n");
+
 		count++;
 	}
 
@@ -2906,8 +2902,9 @@
 	 * number of fragments. If needed, we can call this function,
 	 * although it is less efficient.
 	 */
-	if (nr_frags > 23)
-		return -EIO;
+
+	/* nr_frags should be no more than 18. */
+	BUILD_BUG_ON(MAX_SKB_FRAGS + 1 > 23);
 
 	memset(desc, 0, sizeof(struct tx_desc) * (nr_frags + 1));
 
@@ -3100,11 +3097,10 @@
 		shbufva = (u16 *) skb->data;
 
 		if ((shbufva[0] == 0xffff) &&
-		    (shbufva[1] == 0xffff) && (shbufva[2] == 0xffff)) {
+		    (shbufva[1] == 0xffff) && (shbufva[2] == 0xffff))
 			tcb->flags |= FMP_DEST_BROAD;
-		} else if ((shbufva[0] & 0x3) == 0x0001) {
+		else if ((shbufva[0] & 0x3) == 0x0001)
 			tcb->flags |=  FMP_DEST_MULTI;
-		}
 	}
 
 	tcb->next = NULL;
@@ -3926,9 +3922,7 @@
 	spin_lock_init(&adapter->tcb_ready_qlock);
 	spin_lock_init(&adapter->send_hw_lock);
 	spin_lock_init(&adapter->rcv_lock);
-	spin_lock_init(&adapter->rcv_pend_lock);
 	spin_lock_init(&adapter->fbr_lock);
-	spin_lock_init(&adapter->phy_lock);
 
 	adapter->registry_jumbo_packet = 1514;	/* 1514-9216 */
 
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/boot.h b/drivers/staging/ft1000/ft1000-pcmcia/boot.h
index 1fc4ac1..9dce54e 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/boot.h
+++ b/drivers/staging/ft1000/ft1000-pcmcia/boot.h
@@ -27,7 +27,7 @@
 #define _BOOTH_
 
 // Official bootloader
-unsigned char bootimage [] = {
+static unsigned char bootimage [] = {
 0x00,0x00,0x01,0x5E,0x00,0x00
 ,0x00,0x00,0x00,0x00,0x02,0xD7
 ,0x00,0x00,0x01,0x5E,0x46,0xB3
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
index 6311b2f..d44e858 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
@@ -304,7 +304,7 @@
 	struct dsp_file_hdr *pFileHdr5;
 	struct dsp_image_info *pDspImageInfoV6 = NULL;
 	long requested_version;
-	bool bGoodVersion = 0;
+	bool bGoodVersion = false;
 	struct drv_msg *pMailBoxData;
 	u16 *pUsData = NULL;
 	u16 *pUsFile = NULL;
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
index b2330f1..88f6f9c 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
@@ -32,14 +32,14 @@
 
 #define seq_putx(m, message, size, var) \
 	seq_printf(m, message);	\
-	for(i = 0; i < (size - 1); i++) { \
+	for (i = 0; i < (size - 1); i++) { \
 		seq_printf(m, "%02x:", var[i]); \
 	} \
 	seq_printf(m, "%02x\n", var[i])
 
 #define seq_putd(m, message, size, var) \
 	seq_printf(m, message); \
-	for(i = 0; i < (size - 1); i++) { \
+	for (i = 0; i < (size - 1); i++) { \
 		seq_printf(m, "%d.", var[i]); \
 	} \
 	seq_printf(m, "%d\n", var[i])
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
index 5190c8a..68ded17 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
@@ -1,12 +1,8 @@
-//=====================================================
-// CopyRight (C) 2007 Qualcomm Inc. All Rights Reserved.
-//
-//
-// This file is part of Express Card USB Driver
-//
-// $Id:
-//====================================================
-// 20090926; aelias; removed compiler warnings; ubuntu 9.04; 2.6.28-15-generic
+/*
+* CopyRight (C) 2007 Qualcomm Inc. All Rights Reserved.
+*
+* This file is part of Express Card USB Driver
+*/
 
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -111,23 +107,12 @@
 };
 
 
-//---------------------------------------------------------------------------
-// Function:    check_usb_db
-//
-// Parameters:  struct ft1000_usb  - device structure
-//
-// Returns:     0 - success
-//
-// Description: This function checks if the doorbell register is cleared
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
-static u32 check_usb_db (struct ft1000_usb *ft1000dev)
+/* checks if the doorbell register is cleared */
+static int check_usb_db(struct ft1000_usb *ft1000dev)
 {
 	int loopcnt;
 	u16 temp;
-	u32 status;
+	int status;
 
 	loopcnt = 0;
 
@@ -169,25 +154,12 @@
 	return HANDSHAKE_MAG_TIMEOUT_VALUE;
 }
 
-//---------------------------------------------------------------------------
-// Function:    get_handshake
-//
-// Parameters:  struct ft1000_usb  - device structure
-//              u16 expected_value - the handshake value expected
-//
-// Returns:     handshakevalue - success
-//              HANDSHAKE_TIMEOUT_VALUE - failure
-//
-// Description: This function gets the handshake and compare with the expected value
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
+/* gets the handshake and compares it with the expected value */
 static u16 get_handshake(struct ft1000_usb *ft1000dev, u16 expected_value)
 {
 	u16 handshake;
 	int loopcnt;
-	u32 status = 0;
+	int status = 0;
 
 	loopcnt = 0;
 
@@ -229,25 +201,12 @@
 	return HANDSHAKE_TIMEOUT_VALUE;
 }
 
-//---------------------------------------------------------------------------
-// Function:    put_handshake
-//
-// Parameters:  struct ft1000_usb  - device structure
-//              u16 handshake_value - handshake to be written
-//
-// Returns:     none
-//
-// Description: This function write the handshake value to the handshake location
-//              in DPRAM
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
+/* write the handshake value to the handshake location */
 static void put_handshake(struct ft1000_usb *ft1000dev,u16 handshake_value)
 {
 	u32 tempx;
 	u16 tempword;
-	u32 status;
+	int status;
 
 	tempx = (u32)handshake_value;
 	tempx = ntohl(tempx);
@@ -267,7 +226,7 @@
 	u16 handshake;
 	int loopcnt;
 	u16 temp;
-	u32 status = 0;
+	int status = 0;
 
 	loopcnt = 0;
 	handshake = 0;
@@ -316,22 +275,10 @@
         for (i=0; i<1000; i++);
 }
 
-//---------------------------------------------------------------------------
-// Function:    get_request_type
-//
-// Parameters:  struct ft1000_usb  - device structure
-//
-// Returns:     request type - success
-//
-// Description: This function returns the request type
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
 static u16 get_request_type(struct ft1000_usb *ft1000dev)
 {
 	u16 request_type;
-	u32 status;
+	int status;
 	u16 tempword;
 	u32 tempx;
 
@@ -354,7 +301,7 @@
 static u16 get_request_type_usb(struct ft1000_usb *ft1000dev)
 {
 	u16 request_type;
-	u32 status;
+	int status;
 	u16 tempword;
 	u32 tempx;
 
@@ -380,23 +327,11 @@
 	return request_type;
 }
 
-//---------------------------------------------------------------------------
-// Function:    get_request_value
-//
-// Parameters:  struct ft1000_usb  - device structure
-//
-// Returns:     request value - success
-//
-// Description: This function returns the request value
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
 static long get_request_value(struct ft1000_usb *ft1000dev)
 {
 	u32 value;
 	u16 tempword;
-	u32 status;
+	int status;
 
 	if (ft1000dev->bootmode == 1) {
 		status = fix_ft1000_read_dpram32(ft1000dev,
@@ -416,23 +351,11 @@
 }
 
 
-//---------------------------------------------------------------------------
-// Function:    put_request_value
-//
-// Parameters:  struct ft1000_usb  - device structure
-//              long lvalue - value to be put into DPRAM location DWNLD_MAG1_SIZE_LOC
-//
-// Returns:     none
-//
-// Description: This function writes a value to DWNLD_MAG1_SIZE_LOC
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
+/* writes a value to DWNLD_MAG1_SIZE_LOC */
 static void put_request_value(struct ft1000_usb *ft1000dev, long lvalue)
 {
 	u32    tempx;
-	u32    status;
+	int    status;
 
 	tempx = ntohl(lvalue);
 	status = fix_ft1000_write_dpram32(ft1000dev, DWNLD_MAG1_SIZE_LOC,
@@ -441,18 +364,7 @@
 
 
 
-//---------------------------------------------------------------------------
-// Function:    hdr_checksum
-//
-// Parameters:  struct pseudo_hdr *pHdr - Pseudo header pointer
-//
-// Returns:     checksum - success
-//
-// Description: This function returns the checksum of the pseudo header
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
+/* returns the checksum of the pseudo header */
 static u16 hdr_checksum(struct pseudo_hdr *pHdr)
 {
 	u16   *usPtr = (u16 *)pHdr;
@@ -471,144 +383,130 @@
 
 	for (i = 0; i < len; i++) {
 		if (buff_w[i] != buff_r[i + offset])
-			return -1;
+			return -EREMOTEIO;
 	}
 
 	return 0;
 }
 
-//---------------------------------------------------------------------------
-// Function:    write_blk
-//
-// Parameters:  struct ft1000_usb  - device structure
-//              u16 **pUsFile - DSP image file pointer in u16
-//              u8  **pUcFile - DSP image file pointer in u8
-//              long   word_length - length of the buffer to be written
-//                                   to DPRAM
-//
-// Returns:     STATUS_SUCCESS - success
-//              STATUS_FAILURE - failure
-//
-// Description: This function writes a block of DSP image to DPRAM
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
-static u32 write_blk (struct ft1000_usb *ft1000dev, u16 **pUsFile, u8 **pUcFile, long word_length)
+static int write_dpram32_and_check(struct ft1000_usb *ft1000dev,
+		u16 tempbuffer[], u16 dpram)
 {
-   u32 Status = STATUS_SUCCESS;
-   u16 dpram;
-   int loopcnt, i, j;
-   u16 tempword;
-   u16 tempbuffer[64];
-   u16 resultbuffer[64];
+	int status;
+	u16 resultbuffer[64];
+	int i;
 
-   //DEBUG("FT1000:download:start word_length = %d\n",(int)word_length);
-   dpram = (u16)DWNLD_MAG1_PS_HDR_LOC;
-   tempword = *(*pUsFile);
-   (*pUsFile)++;
-   Status = ft1000_write_dpram16(ft1000dev, dpram, tempword, 0);
-   tempword = *(*pUsFile);
-   (*pUsFile)++;
-   Status = ft1000_write_dpram16(ft1000dev, dpram++, tempword, 1);
-
-   *pUcFile = *pUcFile + 4;
-   word_length--;
-   tempword = (u16)word_length;
-   word_length = (word_length / 16) + 1;
-   for (; word_length > 0; word_length--) /* In words */
-   {
-	   loopcnt = 0;
-
-	      for (i=0; i<32; i++)
-	      {
-		       if (tempword != 0)
-		       {
-    		           tempbuffer[i++] = *(*pUsFile);
-			   (*pUsFile)++;
-   	    	           tempbuffer[i] = *(*pUsFile);
-			   (*pUsFile)++;
-			   *pUcFile = *pUcFile + 4;
-			   loopcnt++;
-			   tempword--;
-		       }
-		       else
-		       {
-			   tempbuffer[i++] = 0;
-			   tempbuffer[i] = 0;
-                       }
-	      }
-
-              //DEBUG("write_blk: loopcnt is %d\n", loopcnt);
-              //DEBUG("write_blk: bootmode = %d\n", bootmode);
-              //DEBUG("write_blk: dpram = %x\n", dpram);
-	      if (ft1000dev->bootmode == 0)
-	      {
-		 if (dpram >= 0x3F4)
-                     Status = ft1000_write_dpram32 (ft1000dev, dpram, (u8 *)&tempbuffer[0], 8);
-	         else
-                    Status = ft1000_write_dpram32 (ft1000dev, dpram, (u8 *)&tempbuffer[0], 64);
-	      }
-	      else
-	      {
-                 for (j=0; j<10; j++)
-                 {
-                   Status = ft1000_write_dpram32 (ft1000dev, dpram, (u8 *)&tempbuffer[0], 64);
-		   if (Status == STATUS_SUCCESS)
-		   {
-		       // Work around for ASIC bit stuffing problem.
-		       if ( (tempbuffer[31] & 0xfe00) == 0xfe00)
-		       {
-      		           Status = ft1000_write_dpram32(ft1000dev, dpram+12, (u8 *)&tempbuffer[24], 64);
-		       }
-    		       // Let's check the data written
-	    	       Status = ft1000_read_dpram32 (ft1000dev, dpram, (u8 *)&resultbuffer[0], 64);
-		       if ( (tempbuffer[31] & 0xfe00) == 0xfe00)
-		       {
-				if (check_buffers(tempbuffer, resultbuffer, 28, 0)) {
+	for (i = 0; i < 10; i++) {
+		status = ft1000_write_dpram32(ft1000dev, dpram,
+				(u8 *)&tempbuffer[0], 64);
+		if (status == 0) {
+			/* Work around for ASIC bit stuffing problem. */
+			if ((tempbuffer[31] & 0xfe00) == 0xfe00) {
+				status = ft1000_write_dpram32(ft1000dev,
+						dpram+12, (u8 *)&tempbuffer[24],
+						64);
+			}
+			/* Let's check the data written */
+			status = ft1000_read_dpram32(ft1000dev, dpram,
+					(u8 *)&resultbuffer[0], 64);
+			if ((tempbuffer[31] & 0xfe00) == 0xfe00) {
+				if (check_buffers(tempbuffer, resultbuffer, 28,
+							0)) {
 					DEBUG("FT1000:download:DPRAM write failed 1 during bootloading\n");
-					msleep(10);
-					Status = STATUS_FAILURE;
+					usleep_range(9000, 11000);
 					break;
 				}
-   			   Status = ft1000_read_dpram32 (ft1000dev, dpram+12, (u8 *)&resultbuffer[0], 64);
+				status = ft1000_read_dpram32(ft1000dev,
+						dpram+12,
+						(u8 *)&resultbuffer[0], 64);
 
-				if (check_buffers(tempbuffer, resultbuffer, 16, 24)) {
+				if (check_buffers(tempbuffer, resultbuffer, 16,
+							24)) {
 					DEBUG("FT1000:download:DPRAM write failed 2 during bootloading\n");
-					msleep(10);
-					Status = STATUS_FAILURE;
+					usleep_range(9000, 11000);
 					break;
 				}
-			   
-			}
-			else
-			{
-				if (check_buffers(tempbuffer, resultbuffer, 32, 0)) {
+			} else {
+				if (check_buffers(tempbuffer, resultbuffer, 32,
+							0)) {
 					DEBUG("FT1000:download:DPRAM write failed 3 during bootloading\n");
-					msleep(10);
-					Status = STATUS_FAILURE;
+					usleep_range(9000, 11000);
 					break;
 				}
-			    
 			}
+			if (status == 0)
+				break;
+		}
+	}
+	return status;
+}
 
-			if (Status == STATUS_SUCCESS)
-			    break;
+/* writes a block of DSP image to DPRAM
+ * Parameters:  struct ft1000_usb  - device structure
+ *              u16 **pUsFile - DSP image file pointer in u16
+ *              u8  **pUcFile - DSP image file pointer in u8
+ *              long word_length - length of the buffer to be written to DPRAM
+ */
+static int write_blk(struct ft1000_usb *ft1000dev, u16 **pUsFile, u8 **pUcFile,
+		long word_length)
+{
+	int status = STATUS_SUCCESS;
+	u16 dpram;
+	int loopcnt, i;
+	u16 tempword;
+	u16 tempbuffer[64];
 
-		    }
+	/*DEBUG("FT1000:download:start word_length = %d\n",(int)word_length); */
+	dpram = (u16)DWNLD_MAG1_PS_HDR_LOC;
+	tempword = *(*pUsFile);
+	(*pUsFile)++;
+	status = ft1000_write_dpram16(ft1000dev, dpram, tempword, 0);
+	tempword = *(*pUsFile);
+	(*pUsFile)++;
+	status = ft1000_write_dpram16(ft1000dev, dpram++, tempword, 1);
+
+	*pUcFile = *pUcFile + 4;
+	word_length--;
+	tempword = (u16)word_length;
+	word_length = (word_length / 16) + 1;
+	for (; word_length > 0; word_length--) { /* In words */
+		loopcnt = 0;
+		for (i = 0; i < 32; i++) {
+			if (tempword != 0) {
+				tempbuffer[i++] = *(*pUsFile);
+				(*pUsFile)++;
+				tempbuffer[i] = *(*pUsFile);
+				(*pUsFile)++;
+				*pUcFile = *pUcFile + 4;
+				loopcnt++;
+				tempword--;
+			} else {
+				tempbuffer[i++] = 0;
+				tempbuffer[i] = 0;
+			}
 		}
 
-		if (Status != STATUS_SUCCESS)
-		{
-                    DEBUG("FT1000:download:Write failed tempbuffer[31] = 0x%x\n", tempbuffer[31]);
-		    break;
+		/*DEBUG("write_blk: loopcnt is %d\n", loopcnt); */
+		/*DEBUG("write_blk: bootmode = %d\n", bootmode); */
+		/*DEBUG("write_blk: dpram = %x\n", dpram); */
+		if (ft1000dev->bootmode == 0) {
+			if (dpram >= 0x3F4)
+				status = ft1000_write_dpram32(ft1000dev, dpram,
+						(u8 *)&tempbuffer[0], 8);
+			else
+				status = ft1000_write_dpram32(ft1000dev, dpram,
+						(u8 *)&tempbuffer[0], 64);
+		} else {
+			status = write_dpram32_and_check(ft1000dev, tempbuffer,
+					dpram);
+			if (status != STATUS_SUCCESS) {
+				DEBUG("FT1000:download:Write failed tempbuffer[31] = 0x%x\n", tempbuffer[31]);
+				break;
+			}
 		}
-
-	     }
-   	     dpram = dpram + loopcnt;
-   }
-
-   return Status;
+		dpram = dpram + loopcnt;
+	}
+	return status;
 }
 
 static void usb_dnld_complete (struct urb *urb)
@@ -616,27 +514,16 @@
     //DEBUG("****** usb_dnld_complete\n");
 }
 
-//---------------------------------------------------------------------------
-// Function:    write_blk_fifo
-//
-// Parameters:  struct ft1000_usb  - device structure
-//              u16 **pUsFile - DSP image file pointer in u16
-//              u8  **pUcFile - DSP image file pointer in u8
-//              long   word_length - length of the buffer to be written
-//                                   to DPRAM
-//
-// Returns:     STATUS_SUCCESS - success
-//              STATUS_FAILURE - failure
-//
-// Description: This function writes a block of DSP image to DPRAM
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
-static u32 write_blk_fifo(struct ft1000_usb *ft1000dev, u16 **pUsFile,
+/* writes a block of DSP image to DPRAM
+ * Parameters:  struct ft1000_usb  - device structure
+ *              u16 **pUsFile - DSP image file pointer in u16
+ *              u8  **pUcFile - DSP image file pointer in u8
+ *              long word_length - length of the buffer to be written to DPRAM
+ */
+static int write_blk_fifo(struct ft1000_usb *ft1000dev, u16 **pUsFile,
 			  u8 **pUcFile, long word_length)
 {
-	u32 Status = STATUS_SUCCESS;
+	int Status = STATUS_SUCCESS;
 	int byte_length;
 
 	byte_length = word_length * 4;
@@ -664,22 +551,71 @@
 	return Status;
 }
 
-//---------------------------------------------------------------------------
-//
-//  Function:   scram_dnldr
-//
-//  Synopsis:   Scramble downloader for Harley based ASIC via USB interface
-//
-//  Arguments:  pFileStart              - pointer to start of file
-//              FileLength              - file length
-//
-//  Returns:    status                  - return code
-//---------------------------------------------------------------------------
+static int scram_start_dwnld(struct ft1000_usb *ft1000dev, u16 *hshake,
+		u32 *state)
+{
+	int status = 0;
 
-u16 scram_dnldr(struct ft1000_usb *ft1000dev, void *pFileStart,
+	DEBUG("FT1000:STATE_START_DWNLD\n");
+	if (ft1000dev->usbboot)
+		*hshake = get_handshake_usb(ft1000dev, HANDSHAKE_DSP_BL_READY);
+	else
+		*hshake = get_handshake(ft1000dev, HANDSHAKE_DSP_BL_READY);
+	if (*hshake == HANDSHAKE_DSP_BL_READY) {
+		DEBUG("scram_dnldr: handshake is HANDSHAKE_DSP_BL_READY, call put_handshake(HANDSHAKE_DRIVER_READY)\n");
+		put_handshake(ft1000dev, HANDSHAKE_DRIVER_READY);
+	} else if (*hshake == HANDSHAKE_TIMEOUT_VALUE) {
+		status = -ETIMEDOUT;
+	} else {
+		DEBUG("FT1000:download:Download error: Handshake failed\n");
+		status = -ENETRESET;
+	}
+	*state = STATE_BOOT_DWNLD;
+	return status;
+}
+
+static int request_code_segment(struct ft1000_usb *ft1000dev, u16 **s_file,
+		 u8 **c_file, const u8 *endpoint, bool boot_case)
+{
+	long word_length;
+	int status;
+
+	/*DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");i*/
+	word_length = get_request_value(ft1000dev);
+	/*DEBUG("FT1000:word_length = 0x%x\n", (int)word_length); */
+	/*NdisMSleep (100); */
+	if (word_length > MAX_LENGTH) {
+		DEBUG("FT1000:download:Download error: Max length exceeded\n");
+		return STATUS_FAILURE;
+	}
+	if ((word_length * 2 + (long)c_file) > (long)endpoint) {
+		/* Error, beyond boot code range.*/
+		DEBUG("FT1000:download:Download error: Requested len=%d exceeds BOOT code boundary.\n", (int)word_length);
+		return STATUS_FAILURE;
+	}
+	if (word_length & 0x1)
+		word_length++;
+	word_length = word_length / 2;
+
+	if (boot_case) {
+		status = write_blk(ft1000dev, s_file, c_file, word_length);
+		/*DEBUG("write_blk returned %d\n", status); */
+	} else {
+		write_blk_fifo(ft1000dev, s_file, c_file, word_length);
+		if (ft1000dev->usbboot == 0)
+			ft1000dev->usbboot++;
+		if (ft1000dev->usbboot == 1)
+			ft1000_write_dpram16(ft1000dev,
+					DWNLD_MAG1_PS_HDR_LOC, 0, 0);
+	}
+	return status;
+}
+
+/* Scramble downloader for Harley based ASIC via USB interface */
+int scram_dnldr(struct ft1000_usb *ft1000dev, void *pFileStart,
 		u32 FileLength)
 {
-	u16 status = STATUS_SUCCESS;
+	int status = STATUS_SUCCESS;
 	u32 state;
 	u16 handshake;
 	struct pseudo_hdr *pseudo_header;
@@ -687,7 +623,6 @@
 	long word_length;
 	u16 request;
 	u16 temp;
-	u16 tempword;
 
 	struct dsp_file_hdr *file_hdr;
 	struct dsp_image_info *dsp_img_info = NULL;
@@ -733,34 +668,13 @@
 
 	loader_code_address = file_hdr->loader_code_address;
 	loader_code_size = file_hdr->loader_code_size;
-	correct_version = FALSE;
+	correct_version = false;
 
 	while ((status == STATUS_SUCCESS) && (state != STATE_DONE_FILE)) {
 		switch (state) {
 		case STATE_START_DWNLD:
-			DEBUG("FT1000:STATE_START_DWNLD\n");
-			if (ft1000dev->usbboot)
-				handshake =
-				    get_handshake_usb(ft1000dev,
-						      HANDSHAKE_DSP_BL_READY);
-			else
-				handshake =
-				    get_handshake(ft1000dev,
-						  HANDSHAKE_DSP_BL_READY);
-
-			if (handshake == HANDSHAKE_DSP_BL_READY) {
-				DEBUG
-				    ("scram_dnldr: handshake is HANDSHAKE_DSP_BL_READY, call put_handshake(HANDSHAKE_DRIVER_READY)\n");
-				put_handshake(ft1000dev,
-					      HANDSHAKE_DRIVER_READY);
-			} else {
-				DEBUG
-				    ("FT1000:download:Download error: Handshake failed\n");
-				status = STATUS_FAILURE;
-			}
-
-			state = STATE_BOOT_DWNLD;
-
+			status = scram_start_dwnld(ft1000dev, &handshake,
+						   &state);
 			break;
 
 		case STATE_BOOT_DWNLD:
@@ -794,41 +708,11 @@
 					ft1000dev->fcodeldr = 1;
 					break;
 				case REQUEST_CODE_SEGMENT:
-					//DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");
-					word_length =
-					    get_request_value(ft1000dev);
-					//DEBUG("FT1000:word_length = 0x%x\n", (int)word_length);
-					//NdisMSleep (100);
-					if (word_length > MAX_LENGTH) {
-						DEBUG
-						    ("FT1000:download:Download error: Max length exceeded\n");
-						status = STATUS_FAILURE;
-						break;
-					}
-					if ((word_length * 2 + c_file) >
-					    boot_end) {
-						/*
-						 * Error, beyond boot code range.
-						 */
-						DEBUG
-						    ("FT1000:download:Download error: Requested len=%d exceeds BOOT code boundary.\n",
-						     (int)word_length);
-						status = STATUS_FAILURE;
-						break;
-					}
-					/*
-					 * Position ASIC DPRAM auto-increment pointer.
-					 */
-					dpram = (u16) DWNLD_MAG1_PS_HDR_LOC;
-					if (word_length & 0x1)
-						word_length++;
-					word_length = word_length / 2;
-
-					status =
-					    write_blk(ft1000dev, &s_file,
-						      &c_file, word_length);
-					//DEBUG("write_blk returned %d\n", status);
-					break;
+					status = request_code_segment(ft1000dev,
+							&s_file, &c_file,
+							(const u8 *)boot_end,
+							true);
+				break;
 				default:
 					DEBUG
 					    ("FT1000:download:Download error: Bad request type=%d in BOOT download state.\n",
@@ -929,45 +813,10 @@
 						break;
 					}
 
-					word_length =
-					    get_request_value(ft1000dev);
-					//DEBUG("FT1000:download:word_length = %d\n", (int)word_length);
-					if (word_length > MAX_LENGTH) {
-						DEBUG
-						    ("FT1000:download:Download error: Max length exceeded\n");
-						status = STATUS_FAILURE;
-						break;
-					}
-					if ((word_length * 2 + c_file) >
-					    code_end) {
-						/*
-						 * Error, beyond boot code range.
-						 */
-						DEBUG
-						    ("FT1000:download:Download error: Requested len=%d exceeds DSP code boundary.\n",
-						     (int)word_length);
-						status = STATUS_FAILURE;
-						break;
-					}
-					/*
-					 * Position ASIC DPRAM auto-increment pointer.
-					 */
-					dpram = (u16) DWNLD_MAG1_PS_HDR_LOC;
-					if (word_length & 0x1)
-						word_length++;
-					word_length = word_length / 2;
-
-					write_blk_fifo(ft1000dev, &s_file,
-						       &c_file, word_length);
-					if (ft1000dev->usbboot == 0)
-						ft1000dev->usbboot++;
-					if (ft1000dev->usbboot == 1) {
-						tempword = 0;
-						ft1000_write_dpram16(ft1000dev,
-								     DWNLD_MAG1_PS_HDR_LOC,
-								     tempword,
-								     0);
-					}
+					status = request_code_segment(ft1000dev,
+							&s_file, &c_file,
+							(const u8 *)code_end,
+							false);
 
 					break;
 
@@ -1036,7 +885,7 @@
 						status =
 						    fix_ft1000_write_dpram32
 						    (ft1000dev, dpram++,
-						     (u8 *) & templong);
+						     (u8 *) &templong);
 
 					}
 					break;
@@ -1044,7 +893,7 @@
 				case REQUEST_CODE_BY_VERSION:
 					DEBUG
 					    ("FT1000:download:REQUEST_CODE_BY_VERSION\n");
-					correct_version = FALSE;
+					correct_version = false;
 					requested_version =
 					    get_request_value(ft1000dev);
 
@@ -1061,7 +910,7 @@
 
 						if (dsp_img_info->version ==
 						    requested_version) {
-							correct_version = TRUE;
+							correct_version = true;
 							DEBUG
 							    ("FT1000:download: correct_version is TRUE\n");
 							s_file =
@@ -1137,13 +986,13 @@
 			if (pseudo_header->checksum ==
 			    hdr_checksum(pseudo_header)) {
 				if (pseudo_header->portdest !=
-				    0x80 /* Dsp OAM */ ) {
+				    0x80 /* Dsp OAM */) {
 					state = STATE_DONE_PROV;
 					break;
 				}
 				pseudo_header_len = ntohs(pseudo_header->length);	/* Byte length for PROV records */
 
-				// Get buffer for provisioning data
+				/* Get buffer for provisioning data */
 				pbuffer =
 				    kmalloc((pseudo_header_len +
 					     sizeof(struct pseudo_hdr)),
@@ -1201,9 +1050,8 @@
 			break;
 		}		/* End Switch */
 
-		if (status != STATUS_SUCCESS) {
+		if (status != STATUS_SUCCESS)
 			break;
-		}
 
 /****
       // Check if Card is present
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index 9b8fed7..0d4931b 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -29,12 +29,7 @@
 
 //#define JDEBUG
 
-static int ft1000_reset(void *ft1000dev);
 static int ft1000_submit_rx_urb(struct ft1000_info *info);
-static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int ft1000_open (struct net_device *dev);
-static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev);
-static int ft1000_chkcard (struct ft1000_usb *dev);
 
 static u8 tempbuffer[1600];
 
@@ -526,7 +521,7 @@
 //-----------------------------------------------------------------------
 int dsp_reload(struct ft1000_usb *ft1000dev)
 {
-	u16 status;
+	int status;
 	u16 tempword;
 	u32 templong;
 
@@ -633,9 +628,9 @@
 
 	DEBUG("ft1000_hw:ft1000_reset_card called.....\n");
 
-	ft1000dev->fCondResetPend = 1;
+	ft1000dev->fCondResetPend = true;
 	info->CardReady = 0;
-	ft1000dev->fProvComplete = 0;
+	ft1000dev->fProvComplete = false;
 
 	/* Make sure we free any memory reserve for provisioning */
 	while (list_empty(&info->prov_list) == 0) {
@@ -666,200 +661,11 @@
 
 	info->CardReady = 1;
 
-	ft1000dev->fCondResetPend = 0;
+	ft1000dev->fCondResetPend = false;
 
 	return TRUE;
 }
 
-static const struct net_device_ops ftnet_ops =
-{
-	.ndo_open = &ft1000_open,
-	.ndo_stop = &ft1000_close,
-	.ndo_start_xmit = &ft1000_start_xmit,
-	.ndo_get_stats = &ft1000_netdev_stats,
-};
-
-
-//---------------------------------------------------------------------------
-// Function:    init_ft1000_netdev
-//
-// Parameters:  ft1000dev  - device structure
-//
-//
-// Returns:     STATUS_SUCCESS - success
-//              STATUS_FAILURE - failure
-//
-// Description: This function initialize the network device
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
-int init_ft1000_netdev(struct ft1000_usb *ft1000dev)
-{
-	struct net_device *netdev;
-	struct ft1000_info *pInfo = NULL;
-	struct dpram_blk *pdpram_blk;
-	int i, ret_val;
-	struct list_head *cur, *tmp;
-	char card_nr[2];
-	u8 gCardIndex = 0;
-
-	DEBUG("Enter init_ft1000_netdev...\n");
-
-	netdev = alloc_etherdev(sizeof(struct ft1000_info));
-	if (!netdev) {
-		DEBUG("init_ft1000_netdev: can not allocate network device\n");
-		return -ENOMEM;
-	}
-
-	pInfo = netdev_priv(netdev);
-
-	memset(pInfo, 0, sizeof(struct ft1000_info));
-
-	dev_alloc_name(netdev, netdev->name);
-
-	DEBUG("init_ft1000_netdev: network device name is %s\n", netdev->name);
-
-	if (strncmp(netdev->name, "eth", 3) == 0) {
-		card_nr[0] = netdev->name[3];
-		card_nr[1] = '\0';
-		ret_val = kstrtou8(card_nr, 10, &gCardIndex);
-		if (ret_val) {
-			printk(KERN_ERR "Can't parse netdev\n");
-			goto err_net;
-		}
-
-		ft1000dev->CardNumber = gCardIndex;
-		DEBUG("card number = %d\n", ft1000dev->CardNumber);
-	} else {
-		printk(KERN_ERR "ft1000: Invalid device name\n");
-		ret_val = -ENXIO;
-		goto err_net;
-	}
-
-	memset(&pInfo->stats, 0, sizeof(struct net_device_stats));
-
-	spin_lock_init(&pInfo->dpram_lock);
-	pInfo->priv = ft1000dev;
-	pInfo->DrvErrNum = 0;
-	pInfo->registered = 1;
-	pInfo->ft1000_reset = ft1000_reset;
-	pInfo->mediastate = 0;
-	pInfo->fifo_cnt = 0;
-	ft1000dev->DeviceCreated = FALSE;
-	pInfo->CardReady = 0;
-	pInfo->DSP_TIME[0] = 0;
-	pInfo->DSP_TIME[1] = 0;
-	pInfo->DSP_TIME[2] = 0;
-	pInfo->DSP_TIME[3] = 0;
-	ft1000dev->fAppMsgPend = 0;
-	ft1000dev->fCondResetPend = 0;
-	ft1000dev->usbboot = 0;
-	ft1000dev->dspalive = 0;
-	memset(&ft1000dev->tempbuf[0], 0, sizeof(ft1000dev->tempbuf));
-
-	INIT_LIST_HEAD(&pInfo->prov_list);
-
-	INIT_LIST_HEAD(&ft1000dev->nodes.list);
-
-	netdev->netdev_ops = &ftnet_ops;
-
-	ft1000dev->net = netdev;
-
-	DEBUG("Initialize free_buff_lock and freercvpool\n");
-	spin_lock_init(&free_buff_lock);
-
-	/* initialize a list of buffers to be use for queuing
-	 * up receive command data
-	 */
-	INIT_LIST_HEAD(&freercvpool);
-
-	/* create list of free buffers */
-	for (i = 0; i < NUM_OF_FREE_BUFFERS; i++) {
-		/* Get memory for DPRAM_DATA link list */
-		pdpram_blk = kmalloc(sizeof(struct dpram_blk), GFP_KERNEL);
-		if (pdpram_blk == NULL) {
-			ret_val = -ENOMEM;
-			goto err_free;
-		}
-		/* Get a block of memory to store command data */
-		pdpram_blk->pbuffer = kmalloc(MAX_CMD_SQSIZE, GFP_KERNEL);
-		if (pdpram_blk->pbuffer == NULL) {
-			ret_val = -ENOMEM;
-			kfree(pdpram_blk);
-			goto err_free;
-		}
-		/* link provisioning data */
-		list_add_tail(&pdpram_blk->list, &freercvpool);
-	}
-	numofmsgbuf = NUM_OF_FREE_BUFFERS;
-
-	return 0;
-
-err_free:
-	list_for_each_safe(cur, tmp, &freercvpool) {
-		pdpram_blk = list_entry(cur, struct dpram_blk, list);
-		list_del(&pdpram_blk->list);
-		kfree(pdpram_blk->pbuffer);
-		kfree(pdpram_blk);
-	}
-err_net:
-	free_netdev(netdev);
-	return ret_val;
-}
-
-//---------------------------------------------------------------------------
-// Function:    reg_ft1000_netdev
-//
-// Parameters:  ft1000dev  - device structure
-//
-//
-// Returns:     STATUS_SUCCESS - success
-//              STATUS_FAILURE - failure
-//
-// Description: This function register the network driver
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
-int reg_ft1000_netdev(struct ft1000_usb *ft1000dev,
-		      struct usb_interface *intf)
-{
-	struct net_device *netdev;
-	struct ft1000_info *pInfo;
-	int rc;
-
-	netdev = ft1000dev->net;
-	pInfo = netdev_priv(ft1000dev->net);
-	DEBUG("Enter reg_ft1000_netdev...\n");
-
-	ft1000_read_register(ft1000dev, &pInfo->AsicID, FT1000_REG_ASIC_ID);
-
-	usb_set_intfdata(intf, pInfo);
-	SET_NETDEV_DEV(netdev, &intf->dev);
-
-	rc = register_netdev(netdev);
-	if (rc) {
-		DEBUG("reg_ft1000_netdev: could not register network device\n");
-		free_netdev(netdev);
-		return rc;
-	}
-
-	ft1000_create_dev(ft1000dev);
-
-	DEBUG("reg_ft1000_netdev returned\n");
-
-	pInfo->CardReady = 1;
-
-	return 0;
-}
-
-int ft1000_reset(void *dev)
-{
-	ft1000_reset_card(dev);
-	return 0;
-}
-
 //---------------------------------------------------------------------------
 // Function:    ft1000_usb_transmit_complete
 //
@@ -963,7 +769,6 @@
 	return 0;
 }
 
-
 //---------------------------------------------------------------------------
 // Function:    ft1000_start_xmit
 //
@@ -1022,6 +827,238 @@
 	return NETDEV_TX_OK;
 }
 
+//---------------------------------------------------------------------------
+// Function:    ft1000_open
+//
+// Parameters:
+//              dev - network device
+//
+//
+// Returns:     none
+//
+// Description: open the network driver
+//
+// Notes:
+//
+//---------------------------------------------------------------------------
+static int ft1000_open(struct net_device *dev)
+{
+	struct ft1000_info *pInfo = netdev_priv(dev);
+	struct ft1000_usb *pFt1000Dev = pInfo->priv;
+	struct timeval tv;
+
+	DEBUG("ft1000_open is called for card %d\n", pFt1000Dev->CardNumber);
+
+	pInfo->stats.rx_bytes = 0;
+	pInfo->stats.tx_bytes = 0;
+	pInfo->stats.rx_packets = 0;
+	pInfo->stats.tx_packets = 0;
+	do_gettimeofday(&tv);
+	pInfo->ConTm = tv.tv_sec;
+	pInfo->ProgConStat = 0;
+
+	netif_start_queue(dev);
+
+	netif_carrier_on(dev);
+
+	return ft1000_submit_rx_urb(pInfo);
+}
+
+static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev)
+{
+	struct ft1000_info *info = netdev_priv(dev);
+
+	return &(info->stats);
+}
+
+static const struct net_device_ops ftnet_ops =
+{
+	.ndo_open = &ft1000_open,
+	.ndo_stop = &ft1000_close,
+	.ndo_start_xmit = &ft1000_start_xmit,
+	.ndo_get_stats = &ft1000_netdev_stats,
+};
+
+//---------------------------------------------------------------------------
+// Function:    init_ft1000_netdev
+//
+// Parameters:  ft1000dev  - device structure
+//
+//
+// Returns:     STATUS_SUCCESS - success
+//              STATUS_FAILURE - failure
+//
+// Description: This function initialize the network device
+//
+// Notes:
+//
+//---------------------------------------------------------------------------
+
+static int ft1000_reset(void *dev)
+{
+	ft1000_reset_card(dev);
+	return 0;
+}
+
+int init_ft1000_netdev(struct ft1000_usb *ft1000dev)
+{
+	struct net_device *netdev;
+	struct ft1000_info *pInfo = NULL;
+	struct dpram_blk *pdpram_blk;
+	int i, ret_val;
+	struct list_head *cur, *tmp;
+	char card_nr[2];
+	u8 gCardIndex = 0;
+
+	DEBUG("Enter init_ft1000_netdev...\n");
+
+	netdev = alloc_etherdev(sizeof(struct ft1000_info));
+	if (!netdev) {
+		DEBUG("init_ft1000_netdev: can not allocate network device\n");
+		return -ENOMEM;
+	}
+
+	pInfo = netdev_priv(netdev);
+
+	memset(pInfo, 0, sizeof(struct ft1000_info));
+
+	dev_alloc_name(netdev, netdev->name);
+
+	DEBUG("init_ft1000_netdev: network device name is %s\n", netdev->name);
+
+	if (strncmp(netdev->name, "eth", 3) == 0) {
+		card_nr[0] = netdev->name[3];
+		card_nr[1] = '\0';
+		ret_val = kstrtou8(card_nr, 10, &gCardIndex);
+		if (ret_val) {
+			printk(KERN_ERR "Can't parse netdev\n");
+			goto err_net;
+		}
+
+		ft1000dev->CardNumber = gCardIndex;
+		DEBUG("card number = %d\n", ft1000dev->CardNumber);
+	} else {
+		printk(KERN_ERR "ft1000: Invalid device name\n");
+		ret_val = -ENXIO;
+		goto err_net;
+	}
+
+	memset(&pInfo->stats, 0, sizeof(struct net_device_stats));
+
+	spin_lock_init(&pInfo->dpram_lock);
+	pInfo->priv = ft1000dev;
+	pInfo->DrvErrNum = 0;
+	pInfo->registered = 1;
+	pInfo->ft1000_reset = ft1000_reset;
+	pInfo->mediastate = 0;
+	pInfo->fifo_cnt = 0;
+	ft1000dev->DeviceCreated = FALSE;
+	pInfo->CardReady = 0;
+	pInfo->DSP_TIME[0] = 0;
+	pInfo->DSP_TIME[1] = 0;
+	pInfo->DSP_TIME[2] = 0;
+	pInfo->DSP_TIME[3] = 0;
+	ft1000dev->fAppMsgPend = false;
+	ft1000dev->fCondResetPend = false;
+	ft1000dev->usbboot = 0;
+	ft1000dev->dspalive = 0;
+	memset(&ft1000dev->tempbuf[0], 0, sizeof(ft1000dev->tempbuf));
+
+	INIT_LIST_HEAD(&pInfo->prov_list);
+
+	INIT_LIST_HEAD(&ft1000dev->nodes.list);
+
+	netdev->netdev_ops = &ftnet_ops;
+
+	ft1000dev->net = netdev;
+
+	DEBUG("Initialize free_buff_lock and freercvpool\n");
+	spin_lock_init(&free_buff_lock);
+
+	/* initialize a list of buffers to be use for queuing
+	 * up receive command data
+	 */
+	INIT_LIST_HEAD(&freercvpool);
+
+	/* create list of free buffers */
+	for (i = 0; i < NUM_OF_FREE_BUFFERS; i++) {
+		/* Get memory for DPRAM_DATA link list */
+		pdpram_blk = kmalloc(sizeof(struct dpram_blk), GFP_KERNEL);
+		if (pdpram_blk == NULL) {
+			ret_val = -ENOMEM;
+			goto err_free;
+		}
+		/* Get a block of memory to store command data */
+		pdpram_blk->pbuffer = kmalloc(MAX_CMD_SQSIZE, GFP_KERNEL);
+		if (pdpram_blk->pbuffer == NULL) {
+			ret_val = -ENOMEM;
+			kfree(pdpram_blk);
+			goto err_free;
+		}
+		/* link provisioning data */
+		list_add_tail(&pdpram_blk->list, &freercvpool);
+	}
+	numofmsgbuf = NUM_OF_FREE_BUFFERS;
+
+	return 0;
+
+err_free:
+	list_for_each_safe(cur, tmp, &freercvpool) {
+		pdpram_blk = list_entry(cur, struct dpram_blk, list);
+		list_del(&pdpram_blk->list);
+		kfree(pdpram_blk->pbuffer);
+		kfree(pdpram_blk);
+	}
+err_net:
+	free_netdev(netdev);
+	return ret_val;
+}
+
+//---------------------------------------------------------------------------
+// Function:    reg_ft1000_netdev
+//
+// Parameters:  ft1000dev  - device structure
+//
+//
+// Returns:     STATUS_SUCCESS - success
+//              STATUS_FAILURE - failure
+//
+// Description: This function register the network driver
+//
+// Notes:
+//
+//---------------------------------------------------------------------------
+int reg_ft1000_netdev(struct ft1000_usb *ft1000dev,
+		      struct usb_interface *intf)
+{
+	struct net_device *netdev;
+	struct ft1000_info *pInfo;
+	int rc;
+
+	netdev = ft1000dev->net;
+	pInfo = netdev_priv(ft1000dev->net);
+	DEBUG("Enter reg_ft1000_netdev...\n");
+
+	ft1000_read_register(ft1000dev, &pInfo->AsicID, FT1000_REG_ASIC_ID);
+
+	usb_set_intfdata(intf, pInfo);
+	SET_NETDEV_DEV(netdev, &intf->dev);
+
+	rc = register_netdev(netdev);
+	if (rc) {
+		DEBUG("reg_ft1000_netdev: could not register network device\n");
+		free_netdev(netdev);
+		return rc;
+	}
+
+	ft1000_create_dev(ft1000dev);
+
+	DEBUG("reg_ft1000_netdev returned\n");
+
+	pInfo->CardReady = 1;
+
+	return 0;
+}
 
 //---------------------------------------------------------------------------
 //
@@ -1159,44 +1196,6 @@
 	return 0;
 }
 
-
-//---------------------------------------------------------------------------
-// Function:    ft1000_open
-//
-// Parameters:
-//              dev - network device
-//
-//
-// Returns:     none
-//
-// Description: open the network driver
-//
-// Notes:
-//
-//---------------------------------------------------------------------------
-static int ft1000_open(struct net_device *dev)
-{
-	struct ft1000_info *pInfo = netdev_priv(dev);
-	struct ft1000_usb *pFt1000Dev = pInfo->priv;
-	struct timeval tv;
-
-	DEBUG("ft1000_open is called for card %d\n", pFt1000Dev->CardNumber);
-
-	pInfo->stats.rx_bytes = 0;
-	pInfo->stats.tx_bytes = 0;
-	pInfo->stats.rx_packets = 0;
-	pInfo->stats.tx_packets = 0;
-	do_gettimeofday(&tv);
-	pInfo->ConTm = tv.tv_sec;
-	pInfo->ProgConStat = 0;
-
-	netif_start_queue(dev);
-
-	netif_carrier_on(dev);
-
-	return ft1000_submit_rx_urb(pInfo);
-}
-
 //---------------------------------------------------------------------------
 // Function:    ft1000_close
 //
@@ -1228,14 +1227,6 @@
 	return 0;
 }
 
-static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev)
-{
-	struct ft1000_info *info = netdev_priv(dev);
-
-	return &(info->stats);
-}
-
-
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_chkcard
@@ -1441,7 +1432,7 @@
 
 	msleep(100);
 
-	dev->fProvComplete = 1;
+	dev->fProvComplete = true;
 	info->CardReady = 1;
 
 	return STATUS_SUCCESS;
@@ -1567,12 +1558,12 @@
 			 * Send provisioning data to DSP
 			 */
 			if (list_empty(&info->prov_list) == 0) {
-				dev->fProvComplete = 0;
+				dev->fProvComplete = false;
 				status = ft1000_dsp_prov(dev);
 				if (status != STATUS_SUCCESS)
 					goto out;
 			} else {
-				dev->fProvComplete = 1;
+				dev->fProvComplete = true;
 				status =
 				    ft1000_write_register(dev, FT1000_DB_HB,
 							  FT1000_REG_DOORBELL);
@@ -1921,7 +1912,7 @@
         else if (tempword & FT1000_DB_COND_RESET) {
             DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type:  FT1000_DB_COND_RESET\n");
 
-	    if (dev->fAppMsgPend == 0) {
+	    if (!dev->fAppMsgPend) {
                // Reset ASIC and DSP
 
                 status    = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER0, (u8 *)&(info->DSP_TIME[0]), FT1000_MAG_DSP_TIMER0_INDX);
@@ -1934,8 +1925,8 @@
                 info->ft1000_reset(dev->net);
             }
             else {
-                dev->fProvComplete = 0;
-                dev->fCondResetPend = 1;
+                dev->fProvComplete = false;
+                dev->fCondResetPend = true;
             }
 
             ft1000_write_register(dev, FT1000_DB_COND_RESET, FT1000_REG_DOORBELL);
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c
index 29a7cd2..a8dd1e5 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c
@@ -36,7 +36,7 @@
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static bool gPollingfailed = FALSE;
+static bool gPollingfailed = false;
 static int ft1000_poll_thread(void *arg)
 {
 	int ret;
@@ -47,7 +47,7 @@
 			ret = ft1000_poll(arg);
 			if (ret != STATUS_SUCCESS) {
 				DEBUG("ft1000_poll_thread: polling failed\n");
-				gPollingfailed = TRUE;
+				gPollingfailed = true;
 			}
 		}
 	}
@@ -171,7 +171,7 @@
 		goto err_load;
 	}
 
-	gPollingfailed = FALSE;
+	gPollingfailed = false;
 	ft1000dev->pPollThread =
 	    kthread_run(ft1000_poll_thread, ft1000dev, "ft1000_poll");
 
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
index bd1da1f..e8d00a9 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
@@ -125,7 +125,7 @@
 extern int numofmsgbuf;
 
 int ft1000_close(struct net_device *dev);
-u16 scram_dnldr(struct ft1000_usb *ft1000dev, void *pFileStart,
+int scram_dnldr(struct ft1000_usb *ft1000dev, void *pFileStart,
 		u32  FileLength);
 
 extern struct list_head freercvpool;
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index ff92f34..62df009 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -2394,7 +2394,8 @@
 
 	list_del_rcu(&serial->list);
 	if (create_loop_dev)
-		tty_unregister_device(fwloop_driver, loop_idx(serial->ports[j]));
+		tty_unregister_device(fwloop_driver,
+				      loop_idx(serial->ports[j]));
 unregister_ttys:
 	for (--j; j >= 0; --j)
 		tty_unregister_device(fwtty_driver, serial->ports[j]->index);
diff --git a/drivers/staging/gdm724x/gdm_lte.c b/drivers/staging/gdm724x/gdm_lte.c
index bc0d510..c57a6ba 100644
--- a/drivers/staging/gdm724x/gdm_lte.c
+++ b/drivers/staging/gdm724x/gdm_lte.c
@@ -110,7 +110,7 @@
 	return 0;
 }
 
-int gdm_lte_emulate_arp(struct sk_buff *skb_in, u32 nic_type)
+static int gdm_lte_emulate_arp(struct sk_buff *skb_in, u32 nic_type)
 {
 	struct nic *nic = netdev_priv(skb_in->dev);
 	struct sk_buff *skb_out;
@@ -186,7 +186,7 @@
 	return 0;
 }
 
-int icmp6_checksum(struct ipv6hdr *ipv6, u16 *ptr, int len)
+static int icmp6_checksum(struct ipv6hdr *ipv6, u16 *ptr, int len)
 {
 	unsigned short *w = ptr;
 	int sum = 0;
@@ -226,7 +226,7 @@
 	return sum;
 }
 
-int gdm_lte_emulate_ndp(struct sk_buff *skb_in, u32 nic_type)
+static int gdm_lte_emulate_ndp(struct sk_buff *skb_in, u32 nic_type)
 {
 	struct nic *nic = netdev_priv(skb_in->dev);
 	struct sk_buff *skb_out;
diff --git a/drivers/staging/gdm724x/gdm_mux.c b/drivers/staging/gdm724x/gdm_mux.c
index 5b1ef40..6216367 100644
--- a/drivers/staging/gdm724x/gdm_mux.c
+++ b/drivers/staging/gdm724x/gdm_mux.c
@@ -26,7 +26,7 @@
 
 #include "gdm_mux.h"
 
-struct workqueue_struct *mux_rx_wq;
+static struct workqueue_struct *mux_rx_wq;
 
 static u16 packet_type[TTY_MAX_COUNT] = {0xF011, 0xF010};
 
@@ -51,7 +51,7 @@
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-int packet_type_to_index(u16 packetType)
+static int packet_type_to_index(u16 packetType)
 {
 	int i;
 
@@ -96,12 +96,12 @@
 {
 	struct mux_rx *r = NULL;
 
-	r = kzalloc(sizeof(struct mux_rx), GFP_ATOMIC);
+	r = kzalloc(sizeof(struct mux_rx), GFP_KERNEL);
 	if (!r)
 		return NULL;
 
-	r->urb = usb_alloc_urb(0, GFP_ATOMIC);
-	r->buf = kmalloc(MUX_RX_MAX_SIZE, GFP_ATOMIC);
+	r->urb = usb_alloc_urb(0, GFP_KERNEL);
+	r->buf = kmalloc(MUX_RX_MAX_SIZE, GFP_KERNEL);
 	if (!r->urb || !r->buf) {
 		usb_free_urb(r->urb);
 		kfree(r->buf);
@@ -541,7 +541,7 @@
 
 	ret = init_usb(mux_dev);
 	if (ret)
-		goto err_free_tty;
+		goto err_free_usb;
 
 	tty_dev->priv_dev = (void *)mux_dev;
 	tty_dev->send_func = gdm_mux_send;
@@ -565,8 +565,8 @@
 
 err_unregister_tty:
 	unregister_lte_tty_device(tty_dev);
+err_free_usb:
 	release_usb(mux_dev);
-err_free_tty:
 	kfree(tty_dev);
 err_free_mux:
 	kfree(mux_dev);
diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c
index 0247a20..c0f7cd7 100644
--- a/drivers/staging/gdm724x/gdm_tty.c
+++ b/drivers/staging/gdm724x/gdm_tty.c
@@ -171,7 +171,8 @@
 	tty_port_tty_wakeup(&gdm->port);
 }
 
-static int gdm_tty_write(struct tty_struct *tty, const unsigned char *buf, int len)
+static int gdm_tty_write(struct tty_struct *tty, const unsigned char *buf,
+			 int len)
 {
 	struct gdm *gdm = tty->driver_data;
 	int remain = len;
@@ -185,7 +186,8 @@
 		return 0;
 
 	while (1) {
-		sending_len = remain > MUX_TX_MAX_SIZE ? MUX_TX_MAX_SIZE : remain;
+		sending_len = remain > MUX_TX_MAX_SIZE ? MUX_TX_MAX_SIZE :
+							 remain;
 		gdm_tty_send(gdm,
 			     (void *)(buf+sent_len),
 			     sending_len,
@@ -247,7 +249,8 @@
 		gdm->minor = j;
 		gdm->tty_dev = tty_dev;
 
-		tty_port_register_device(&gdm->port, gdm_driver[i], gdm->minor, device);
+		tty_port_register_device(&gdm->port, gdm_driver[i],
+					 gdm->minor, device);
 	}
 
 	for (i = 0; i < MAX_ISSUE_NUM; i++)
@@ -309,7 +312,8 @@
 		tty_driver->major = GDM_TTY_MAJOR;
 		tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 		tty_driver->subtype = SERIAL_TYPE_NORMAL;
-		tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+		tty_driver->flags = TTY_DRIVER_REAL_RAW |
+					TTY_DRIVER_DYNAMIC_DEV;
 		tty_driver->init_termios = tty_std_termios;
 		tty_driver->init_termios.c_cflag = B9600 | CS8 | HUPCL | CLOCAL;
 		tty_driver->init_termios.c_lflag = ISIG | ICANON | IEXTEN;
diff --git a/drivers/staging/gdm724x/gdm_usb.c b/drivers/staging/gdm724x/gdm_usb.c
index bdc9637..781134a 100644
--- a/drivers/staging/gdm724x/gdm_usb.c
+++ b/drivers/staging/gdm724x/gdm_usb.c
@@ -88,12 +88,11 @@
 	struct usb_tx *t = NULL;
 	int ret = 0;
 
-	t = kmalloc(sizeof(struct usb_tx), GFP_ATOMIC);
+	t = kzalloc(sizeof(struct usb_tx), GFP_ATOMIC);
 	if (!t) {
 		ret = -ENOMEM;
 		goto out;
 	}
-	memset(t, 0, sizeof(struct usb_tx));
 
 	t->urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!(len % 512))
@@ -124,12 +123,11 @@
 	int ret = 0;
 
 
-	t_sdu = kmalloc(sizeof(struct usb_tx_sdu), GFP_ATOMIC);
+	t_sdu = kzalloc(sizeof(struct usb_tx_sdu), GFP_ATOMIC);
 	if (!t_sdu) {
 		ret = -ENOMEM;
 		goto out;
 	}
-	memset(t_sdu, 0, sizeof(struct usb_tx_sdu));
 
 	t_sdu->buf = kmalloc(SDU_BUF_SIZE, GFP_ATOMIC);
 	if (!t_sdu->buf) {
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
index cf32ae0..35154d6 100644
--- a/drivers/staging/iio/Documentation/iio_utils.h
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -502,7 +502,7 @@
 
 inline int _write_sysfs_int(char *filename, char *basedir, int val, int verify)
 {
-	int ret;
+	int ret = 0;
 	FILE *sysfsfp;
 	int test;
 	char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
diff --git a/drivers/staging/iio/TODO b/drivers/staging/iio/TODO
index 04c2326..c22a0ed 100644
--- a/drivers/staging/iio/TODO
+++ b/drivers/staging/iio/TODO
@@ -13,6 +13,17 @@
 3) Expand device set. Lots of other maxim adc's have very
    similar interfaces.
 
+MXS LRADC driver:
+This is a classic MFD device as it combines the following subdevices
+ - touchscreen controller (input subsystem related device)
+ - general purpose ADC channels
+ - battery voltage monitor (power subsystem related device)
+ - die temperature monitor (thermal management)
+
+At least the battery voltage and die temperature feature is required in-kernel
+by a driver of the SoC's battery charging unit to avoid any damage to the
+silicon and the battery.
+
 TSL2561
 Would be nice
 1) Open question of userspace vs kernel space balance when
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index 5c28961..4c9364b 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -102,7 +102,6 @@
 					int addr)
 {
 	struct adis16220_state *st = iio_priv(indio_dev);
-	struct spi_message msg;
 	struct spi_transfer xfers[] = {
 		{
 			.tx_buf = st->tx,
@@ -147,10 +146,7 @@
 	}
 	xfers[1].len = count;
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfers[0], &msg);
-	spi_message_add_tail(&xfers[1], &msg);
-	ret = spi_sync(st->adis.spi, &msg);
+	ret = spi_sync_transfer(st->adis.spi, xfers, ARRAY_SIZE(xfers));
 	if (ret) {
 
 		mutex_unlock(&st->buf_lock);
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index bb852dc..735c0a3 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -190,15 +190,26 @@
 };
 
 static int lis3l02dq_read_thresh(struct iio_dev *indio_dev,
-				 u64 e,
-				 int *val)
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info,
+				 int *val, int *val2)
 {
-	return lis3l02dq_read_reg_s16(indio_dev, LIS3L02DQ_REG_THS_L_ADDR, val);
+	int ret;
+
+	ret = lis3l02dq_read_reg_s16(indio_dev, LIS3L02DQ_REG_THS_L_ADDR, val);
+	if (ret)
+		return ret;
+	return IIO_VAL_INT;
 }
 
 static int lis3l02dq_write_thresh(struct iio_dev *indio_dev,
-				  u64 event_code,
-				  int val)
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  enum iio_event_info info,
+				  int val, int val2)
 {
 	u16 value = val;
 	return lis3l02dq_spi_write_reg_s16(indio_dev,
@@ -503,9 +514,19 @@
 	return IRQ_HANDLED;
 }
 
-#define LIS3L02DQ_EVENT_MASK					\
-	(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |	\
-	 IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
+static const struct iio_event_spec lis3l02dq_event[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
+	}
+};
 
 #define LIS3L02DQ_CHAN(index, mod)				\
 	{							\
@@ -523,7 +544,8 @@
 			.realbits = 12,				\
 			.storagebits = 16,			\
 		},						\
-		.event_mask = LIS3L02DQ_EVENT_MASK,		\
+		.event_spec = lis3l02dq_event,			\
+		.num_event_specs = ARRAY_SIZE(lis3l02dq_event),	\
 	 }
 
 static const struct iio_chan_spec lis3l02dq_channels[] = {
@@ -535,14 +557,14 @@
 
 
 static int lis3l02dq_read_event_config(struct iio_dev *indio_dev,
-					   u64 event_code)
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir)
 {
 
 	u8 val;
 	int ret;
-	u8 mask = (1 << (IIO_EVENT_CODE_EXTRACT_MODIFIER(event_code)*2 +
-			 (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			  IIO_EV_DIR_RISING)));
+	u8 mask = (1 << (chan->channel2*2 + (dir == IIO_EV_DIR_RISING)));
 	ret = lis3l02dq_spi_read_reg_8(indio_dev,
 				       LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
 				       &val);
@@ -587,16 +609,16 @@
 }
 
 static int lis3l02dq_write_event_config(struct iio_dev *indio_dev,
-					u64 event_code,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir,
 					int state)
 {
 	int ret = 0;
 	u8 val, control;
 	u8 currentlyset;
 	bool changed = false;
-	u8 mask = (1 << (IIO_EVENT_CODE_EXTRACT_MODIFIER(event_code)*2 +
-			 (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			  IIO_EV_DIR_RISING)));
+	u8 mask = (1 << (chan->channel2*2 + (dir == IIO_EV_DIR_RISING)));
 
 	mutex_lock(&indio_dev->mlock);
 	/* read current control */
@@ -654,10 +676,10 @@
 static const struct iio_info lis3l02dq_info = {
 	.read_raw = &lis3l02dq_read_raw,
 	.write_raw = &lis3l02dq_write_raw,
-	.read_event_value = &lis3l02dq_read_thresh,
-	.write_event_value = &lis3l02dq_write_thresh,
-	.write_event_config = &lis3l02dq_write_event_config,
-	.read_event_config = &lis3l02dq_read_event_config,
+	.read_event_value_new = &lis3l02dq_read_thresh,
+	.write_event_value_new = &lis3l02dq_write_thresh,
+	.write_event_config_new = &lis3l02dq_write_event_config,
+	.read_event_config_new = &lis3l02dq_read_event_config,
 	.driver_module = THIS_MODULE,
 	.attrs = &lis3l02dq_attribute_group,
 };
@@ -694,7 +716,7 @@
 				  lis3l02dq_channels,
 				  ARRAY_SIZE(lis3l02dq_channels));
 	if (ret) {
-		printk(KERN_ERR "failed to initialize the buffer\n");
+		dev_err(&spi->dev, "failed to initialize the buffer\n");
 		goto error_unreg_buffer_funcs;
 	}
 
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 5b8f0f6..79cefe0 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -111,7 +111,7 @@
 				u8 *buf)
 {
 	int ret, i;
-	u8 *rx_array ;
+	u8 *rx_array;
 	s16 *data = (s16 *)buf;
 	int scan_count = bitmap_weight(indio_dev->active_scan_mask,
 				       indio_dev->masklength);
@@ -146,11 +146,7 @@
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		len = lis3l02dq_get_buffer_element(indio_dev, data);
 
-	  /* Guaranteed to be aligned with 8 byte boundary */
-	if (indio_dev->scan_timestamp)
-		*(s64 *)((u8 *)data + ALIGN(len, sizeof(s64)))
-			= pf->timestamp;
-	iio_push_to_buffers(indio_dev, (u8 *)data);
+	iio_push_to_buffers_with_timestamp(indio_dev, data, pf->timestamp);
 
 	kfree(data);
 done:
@@ -264,8 +260,7 @@
 		else
 			break;
 	if (i == 5)
-		printk(KERN_INFO
-		       "Failed to clear the interrupt for lis3l02dq\n");
+		pr_info("Failed to clear the interrupt for lis3l02dq\n");
 
 	/* irq reenabled so success! */
 	return 0;
@@ -387,7 +382,6 @@
 }
 
 static const struct iio_buffer_setup_ops lis3l02dq_buffer_setup_ops = {
-	.preenable = &iio_sw_buffer_preenable,
 	.postenable = &lis3l02dq_buffer_postenable,
 	.predisable = &lis3l02dq_buffer_predisable,
 };
@@ -401,7 +395,7 @@
 	if (!buffer)
 		return -ENOMEM;
 
-	indio_dev->buffer = buffer;
+	iio_device_attach_buffer(indio_dev, buffer);
 
 	buffer->scan_timestamp = true;
 	indio_dev->setup_ops = &lis3l02dq_buffer_setup_ops;
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index 48a25ba..c49e6ef 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -419,8 +419,11 @@
 
 static IIO_DEVICE_ATTR(revision, S_IRUGO, sca3000_show_rev, NULL, 0);
 
-#define SCA3000_EVENT_MASK					\
-	(IIO_EV_BIT(IIO_EV_TYPE_MAG, IIO_EV_DIR_RISING))
+static const struct iio_event_spec sca3000_event = {
+	.type = IIO_EV_TYPE_MAG,
+	.dir = IIO_EV_DIR_RISING,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+};
 
 #define SCA3000_CHAN(index, mod)				\
 	{							\
@@ -437,7 +440,8 @@
 			.storagebits = 16,			\
 			.shift = 5,				\
 		},						\
-		.event_mask = SCA3000_EVENT_MASK,		\
+		.event_spec = &sca3000_event,			\
+		.num_event_specs = 1,				\
 	 }
 
 static const struct iio_chan_spec sca3000_channels[] = {
@@ -624,9 +628,9 @@
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int ret, base_freq = 0;
 	int ctrlval;
-	long val;
+	int val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtoint(buf, 10, &val);
 	if (ret)
 		return ret;
 
@@ -703,12 +707,15 @@
  * sca3000_read_thresh() - query of a threshold
  **/
 static int sca3000_read_thresh(struct iio_dev *indio_dev,
-			       u64 e,
-			       int *val)
+			       const struct iio_chan_spec *chan,
+			       enum iio_event_type type,
+			       enum iio_event_direction dir,
+			       enum iio_event_info info,
+			       int *val, int *val2)
 {
 	int ret, i;
 	struct sca3000_state *st = iio_priv(indio_dev);
-	int num = IIO_EVENT_CODE_EXTRACT_MODIFIER(e);
+	int num = chan->channel2;
 	mutex_lock(&st->lock);
 	ret = sca3000_read_ctrl_reg(st, sca3000_addresses[num][1]);
 	mutex_unlock(&st->lock);
@@ -724,18 +731,21 @@
 				 ARRAY_SIZE(st->info->mot_det_mult_xz))
 			*val += st->info->mot_det_mult_xz[i];
 
-	return 0;
+	return IIO_VAL_INT;
 }
 
 /**
  * sca3000_write_thresh() control of threshold
  **/
 static int sca3000_write_thresh(struct iio_dev *indio_dev,
-				u64 e,
-				int val)
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
 {
 	struct sca3000_state *st = iio_priv(indio_dev);
-	int num = IIO_EVENT_CODE_EXTRACT_MODIFIER(e);
+	int num = chan->channel2;
 	int ret;
 	int i;
 	u8 nonlinear = 0;
@@ -866,12 +876,14 @@
  * sca3000_read_event_config() what events are enabled
  **/
 static int sca3000_read_event_config(struct iio_dev *indio_dev,
-				     u64 e)
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir)
 {
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int ret;
 	u8 protect_mask = 0x03;
-	int num = IIO_EVENT_CODE_EXTRACT_MODIFIER(e);
+	int num = chan->channel2;
 
 	/* read current value of mode register */
 	mutex_lock(&st->lock);
@@ -931,12 +943,12 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
-	long val;
+	u8 val;
 	int ret;
 	u8 protect_mask = SCA3000_FREE_FALL_DETECT;
 
 	mutex_lock(&st->lock);
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 
@@ -969,13 +981,15 @@
  * this mode is disabled.  Currently normal mode is assumed.
  **/
 static int sca3000_write_event_config(struct iio_dev *indio_dev,
-				      u64 e,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir,
 				      int state)
 {
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int ret, ctrlval;
 	u8 protect_mask = 0x03;
-	int num = IIO_EVENT_CODE_EXTRACT_MODIFIER(e);
+	int num = chan->channel2;
 
 	mutex_lock(&st->lock);
 	/* First read the motion detector config to find out if
@@ -1112,20 +1126,20 @@
 	.attrs = &sca3000_attribute_group,
 	.read_raw = &sca3000_read_raw,
 	.event_attrs = &sca3000_event_attribute_group,
-	.read_event_value = &sca3000_read_thresh,
-	.write_event_value = &sca3000_write_thresh,
-	.read_event_config = &sca3000_read_event_config,
-	.write_event_config = &sca3000_write_event_config,
+	.read_event_value_new = &sca3000_read_thresh,
+	.write_event_value_new = &sca3000_write_thresh,
+	.read_event_config_new = &sca3000_read_event_config,
+	.write_event_config_new = &sca3000_write_event_config,
 	.driver_module = THIS_MODULE,
 };
 
 static const struct iio_info sca3000_info_with_temp = {
 	.attrs = &sca3000_attribute_group_with_temp,
 	.read_raw = &sca3000_read_raw,
-	.read_event_value = &sca3000_read_thresh,
-	.write_event_value = &sca3000_write_thresh,
-	.read_event_config = &sca3000_read_event_config,
-	.write_event_config = &sca3000_write_event_config,
+	.read_event_value_new = &sca3000_read_thresh,
+	.write_event_value_new = &sca3000_write_thresh,
+	.read_event_config_new = &sca3000_read_event_config,
+	.write_event_config_new = &sca3000_write_event_config,
 	.driver_module = THIS_MODULE,
 };
 
diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c
index 3e5e860..ea0af6d 100644
--- a/drivers/staging/iio/accel/sca3000_ring.c
+++ b/drivers/staging/iio/accel/sca3000_ring.c
@@ -177,11 +177,11 @@
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	long val;
+	u8 val;
 	int ret;
 
 	mutex_lock(&st->lock);
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_MASK, 1);
@@ -252,7 +252,7 @@
 	struct iio_buffer *buf;
 	struct iio_hw_buffer *ring;
 
-	ring = kzalloc(sizeof *ring, GFP_KERNEL);
+	ring = kzalloc(sizeof(*ring), GFP_KERNEL);
 	if (!ring)
 		return NULL;
 
@@ -265,7 +265,7 @@
 	return buf;
 }
 
-static inline void sca3000_rb_free(struct iio_buffer *r)
+static void sca3000_ring_release(struct iio_buffer *r)
 {
 	kfree(iio_to_hw_buf(r));
 }
@@ -274,23 +274,28 @@
 	.read_first_n = &sca3000_read_first_n_hw_rb,
 	.get_length = &sca3000_ring_get_length,
 	.get_bytes_per_datum = &sca3000_ring_get_bytes_per_datum,
+	.release = sca3000_ring_release,
 };
 
 int sca3000_configure_ring(struct iio_dev *indio_dev)
 {
-	indio_dev->buffer = sca3000_rb_allocate(indio_dev);
-	if (indio_dev->buffer == NULL)
+	struct iio_buffer *buffer;
+
+	buffer = sca3000_rb_allocate(indio_dev);
+	if (buffer == NULL)
 		return -ENOMEM;
 	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
 
 	indio_dev->buffer->access = &sca3000_ring_access_funcs;
 
+	iio_device_attach_buffer(indio_dev, buffer);
+
 	return 0;
 }
 
 void sca3000_unconfigure_ring(struct iio_dev *indio_dev)
 {
-	sca3000_rb_free(indio_dev->buffer);
+	iio_buffer_put(indio_dev->buffer);
 }
 
 static inline
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index cabc7a3..e3d6430 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -102,7 +102,7 @@
 
 config LPC32XX_ADC
 	tristate "NXP LPC32XX ADC"
-	depends on ARCH_LPC32XX
+	depends on ARCH_LPC32XX || COMPILE_TEST
 	help
 	  Say yes here to build support for the integrated ADC inside the
 	  LPC32XX SoC. Note that this feature uses the same hardware as the
@@ -113,7 +113,9 @@
 
 config MXS_LRADC
 	tristate "Freescale i.MX23/i.MX28 LRADC"
-	depends on ARCH_MXS
+	depends on ARCH_MXS || COMPILE_TEST
+	depends on INPUT
+	select STMP_DEVICE
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -125,7 +127,7 @@
 
 config SPEAR_ADC
 	tristate "ST SPEAr ADC"
-	depends on PLAT_SPEAR
+	depends on PLAT_SPEAR || COMPILE_TEST
 	help
 	  Say yes here to build support for the integrated ADC inside the
 	  ST SPEAr SoC. Provides direct access via sysfs.
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 3283e282..83bb44b 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -623,17 +623,17 @@
 		return -ENODEV;
 	}
 
-	indio_dev = iio_device_alloc(sizeof(*st));
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
 	st = iio_priv(indio_dev);
 
-	st->reg = regulator_get(&spi->dev, "vcc");
+	st->reg = devm_regulator_get(&spi->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 
 		voltage_uv = regulator_get_voltage(st->reg);
 	}
@@ -677,11 +677,6 @@
 error_disable_reg:
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-error_put_reg:
-	if (!IS_ERR(st->reg))
-		regulator_put(st->reg);
-
-	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -694,10 +689,8 @@
 	iio_device_unregister(indio_dev);
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
 
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index c19618b..8209fa5 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -783,7 +783,6 @@
 			   long m)
 {
 	struct ad7280_state *st = iio_priv(indio_dev);
-	unsigned int scale_uv;
 	int ret;
 
 	switch (m) {
@@ -804,13 +803,12 @@
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		if ((chan->address & 0xFF) <= AD7280A_CELL_VOLTAGE_6)
-			scale_uv = (4000 * 1000) >> AD7280A_BITS;
+			*val = 4000;
 		else
-			scale_uv = (5000 * 1000) >> AD7280A_BITS;
+			*val = 5000;
 
-		*val =  scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val2 = AD7280A_BITS;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -835,8 +833,9 @@
 	int ret;
 	const unsigned short tACQ_ns[4] = {465, 1010, 1460, 1890};
 	const unsigned short nAVG[4] = {1, 2, 4, 8};
-	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+	struct iio_dev *indio_dev;
 
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -860,7 +859,7 @@
 
 	ret = ad7280_chain_setup(st);
 	if (ret < 0)
-		goto error_free_device;
+		return ret;
 
 	st->slave_num = ret;
 	st->scan_cnt = (st->slave_num + 1) * AD7280A_NUM_CH;
@@ -891,7 +890,7 @@
 
 	ret = ad7280_channel_init(st);
 	if (ret < 0)
-		goto error_free_device;
+		return ret;
 
 	indio_dev->num_channels = ret;
 	indio_dev->channels = st->channels;
@@ -940,9 +939,6 @@
 error_free_channels:
 	kfree(st->channels);
 
-error_free_device:
-	iio_device_free(indio_dev);
-
 	return ret;
 }
 
@@ -960,7 +956,6 @@
 
 	kfree(st->channels);
 	kfree(st->iio_attr);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
index a2e61c2..d13f8ae 100644
--- a/drivers/staging/iio/adc/ad7291.c
+++ b/drivers/staging/iio/adc/ad7291.c
@@ -164,97 +164,14 @@
 	return IRQ_HANDLED;
 }
 
-static inline ssize_t ad7291_show_hyst(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad7291_chip_info *chip = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	u16 data;
-	int ret;
-
-	ret = ad7291_i2c_read(chip, this_attr->address, &data);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d\n", data & AD7291_VALUE_MASK);
-}
-
-static inline ssize_t ad7291_set_hyst(struct device *dev,
-				      struct device_attribute *attr,
-				      const char *buf,
-				      size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad7291_chip_info *chip = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	u16 data;
-	int ret;
-
-	ret = kstrtou16(buf, 10, &data);
-
-	if (ret < 0)
-		return ret;
-	if (data > AD7291_VALUE_MASK)
-		return -EINVAL;
-
-	ret = ad7291_i2c_write(chip, this_attr->address, data);
-	if (ret < 0)
-		return ret;
-
-	return len;
-}
-
-static IIO_DEVICE_ATTR(in_temp0_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst,
-		       AD7291_HYST(8));
-static IIO_DEVICE_ATTR(in_voltage0_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(0));
-static IIO_DEVICE_ATTR(in_voltage1_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(1));
-static IIO_DEVICE_ATTR(in_voltage2_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(2));
-static IIO_DEVICE_ATTR(in_voltage3_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(3));
-static IIO_DEVICE_ATTR(in_voltage4_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(4));
-static IIO_DEVICE_ATTR(in_voltage5_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(5));
-static IIO_DEVICE_ATTR(in_voltage6_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(6));
-static IIO_DEVICE_ATTR(in_voltage7_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(7));
-
-static struct attribute *ad7291_event_attributes[] = {
-	&iio_dev_attr_in_temp0_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage0_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage1_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage2_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage3_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage4_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage5_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage6_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage7_thresh_both_hyst_raw.dev_attr.attr,
-	NULL,
-};
-
-static unsigned int ad7291_threshold_reg(u64 event_code)
+static unsigned int ad7291_threshold_reg(const struct iio_chan_spec *chan,
+	enum iio_event_direction dir, enum iio_event_info info)
 {
 	unsigned int offset;
 
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+	switch (chan->type) {
 	case IIO_VOLTAGE:
-		offset = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
+		offset = chan->channel;
 		break;
 	case IIO_TEMP:
 		offset = 8;
@@ -263,69 +180,78 @@
 	    return 0;
 	}
 
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING)
-		return AD7291_DATA_LOW(offset);
-	else
-		return AD7291_DATA_HIGH(offset);
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+			if (dir == IIO_EV_DIR_FALLING)
+					return AD7291_DATA_HIGH(offset);
+			else
+					return AD7291_DATA_LOW(offset);
+	case IIO_EV_INFO_HYSTERESIS:
+			return AD7291_HYST(offset);
+	default:
+			break;
+	}
+	return 0;
 }
 
 static int ad7291_read_event_value(struct iio_dev *indio_dev,
-				   u64 event_code,
-				   int *val)
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir,
+				   enum iio_event_info info,
+				   int *val, int *val2)
 {
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
 	int ret;
 	u16 uval;
 
-	ret = ad7291_i2c_read(chip, ad7291_threshold_reg(event_code), &uval);
+	ret = ad7291_i2c_read(chip, ad7291_threshold_reg(chan, dir, info),
+		&uval);
 	if (ret < 0)
 		return ret;
 
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
-	case IIO_VOLTAGE:
+	if (info == IIO_EV_INFO_HYSTERESIS || chan->type == IIO_VOLTAGE)
 		*val = uval & AD7291_VALUE_MASK;
-		return 0;
-	case IIO_TEMP:
+
+	else
 		*val = sign_extend32(uval, 11);
-		return 0;
-	default:
-		return -EINVAL;
-	};
+
+	return IIO_VAL_INT;
 }
 
 static int ad7291_write_event_value(struct iio_dev *indio_dev,
-				    u64 event_code,
-				    int val)
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int val, int val2)
 {
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
 
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
-	case IIO_VOLTAGE:
+	if (info == IIO_EV_INFO_HYSTERESIS || chan->type == IIO_VOLTAGE) {
 		if (val > AD7291_VALUE_MASK || val < 0)
 			return -EINVAL;
-		break;
-	case IIO_TEMP:
+	} else {
 		if (val > 2047 || val < -2048)
 			return -EINVAL;
-		break;
-	default:
-		return -EINVAL;
 	}
 
-	return ad7291_i2c_write(chip, ad7291_threshold_reg(event_code), val);
+	return ad7291_i2c_write(chip, ad7291_threshold_reg(chan, dir, info),
+		val);
 }
 
 static int ad7291_read_event_config(struct iio_dev *indio_dev,
-				    u64 event_code)
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir)
 {
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
 	/* To be enabled the channel must simply be on. If any are enabled
 	   we are in continuous sampling mode */
 
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+	switch (chan->type) {
 	case IIO_VOLTAGE:
-		if (chip->c_mask &
-		    (1 << (15 - IIO_EVENT_CODE_EXTRACT_CHAN(event_code))))
+		if (chip->c_mask & (1 << (15 - chan->channel)))
 			return 1;
 		else
 			return 0;
@@ -339,11 +265,14 @@
 }
 
 static int ad7291_write_event_config(struct iio_dev *indio_dev,
-				     u64 event_code,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
 				     int state)
 {
 	int ret = 0;
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
+	unsigned int mask;
 	u16 regval;
 
 	mutex_lock(&chip->state_lock);
@@ -354,16 +283,14 @@
 	 * Possible to disable temp as well but that makes single read tricky.
 	 */
 
-	switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+	mask = BIT(15 - chan->channel);
+
+	switch (chan->type) {
 	case IIO_VOLTAGE:
-		if ((!state) && (chip->c_mask & (1 << (15 -
-				IIO_EVENT_CODE_EXTRACT_CHAN(event_code)))))
-			chip->c_mask &= ~(1 << (15 - IIO_EVENT_CODE_EXTRACT_CHAN
-							(event_code)));
-		else if (state && (!(chip->c_mask & (1 << (15 -
-				IIO_EVENT_CODE_EXTRACT_CHAN(event_code))))))
-			chip->c_mask |= (1 << (15 - IIO_EVENT_CODE_EXTRACT_CHAN
-							(event_code)));
+		if ((!state) && (chip->c_mask & mask))
+			chip->c_mask &= ~mask;
+		else if (state && (!(chip->c_mask & mask)))
+			chip->c_mask |= mask;
 		else
 			break;
 
@@ -473,6 +400,24 @@
 	}
 }
 
+static const struct iio_event_spec ad7291_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
+	},
+};
+
 #define AD7291_VOLTAGE_CHAN(_chan)					\
 {									\
 	.type = IIO_VOLTAGE,						\
@@ -480,8 +425,8 @@
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
 	.indexed = 1,							\
 	.channel = _chan,						\
-	.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|\
-	IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)		\
+	.event_spec = ad7291_events,					\
+	.num_event_specs = ARRAY_SIZE(ad7291_events),			\
 }
 
 static const struct iio_chan_spec ad7291_channels[] = {
@@ -500,23 +445,17 @@
 				BIT(IIO_CHAN_INFO_SCALE),
 		.indexed = 1,
 		.channel = 0,
-		.event_mask =
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)
+		.event_spec = ad7291_events,
+		.num_event_specs = ARRAY_SIZE(ad7291_events),
 	}
 };
 
-static struct attribute_group ad7291_event_attribute_group = {
-	.attrs = ad7291_event_attributes,
-};
-
 static const struct iio_info ad7291_info = {
 	.read_raw = &ad7291_read_raw,
-	.read_event_config = &ad7291_read_event_config,
-	.write_event_config = &ad7291_write_event_config,
-	.read_event_value = &ad7291_read_event_value,
-	.write_event_value = &ad7291_write_event_value,
-	.event_attrs = &ad7291_event_attribute_group,
+	.read_event_config_new = &ad7291_read_event_config,
+	.write_event_config_new = &ad7291_write_event_config,
+	.read_event_value_new = &ad7291_read_event_value,
+	.write_event_value_new = &ad7291_write_event_value,
 	.driver_module = THIS_MODULE,
 };
 
@@ -528,21 +467,19 @@
 	struct iio_dev *indio_dev;
 	int ret = 0;
 
-	indio_dev = iio_device_alloc(sizeof(*chip));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
 	chip = iio_priv(indio_dev);
 
 	if (pdata && pdata->use_external_ref) {
-		chip->reg = regulator_get(&client->dev, "vref");
+		chip->reg = devm_regulator_get(&client->dev, "vref");
 		if (IS_ERR(chip->reg))
-			goto error_free;
+			return ret;
 
 		ret = regulator_enable(chip->reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 	}
 
 	mutex_init(&chip->state_lock);
@@ -601,12 +538,7 @@
 error_disable_reg:
 	if (chip->reg)
 		regulator_disable(chip->reg);
-error_put_reg:
-	if (chip->reg)
-		regulator_put(chip->reg);
-error_free:
-	iio_device_free(indio_dev);
-error_ret:
+
 	return ret;
 }
 
@@ -620,12 +552,8 @@
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
 
-	if (chip->reg) {
+	if (chip->reg)
 		regulator_disable(chip->reg);
-		regulator_put(chip->reg);
-	}
-
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 72868ce..2083673 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -85,7 +85,6 @@
 {
 	int ret;
 	struct ad7606_state *st = iio_priv(indio_dev);
-	unsigned int scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -101,11 +100,9 @@
 		*val = (short) ret;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->range * 1000 * 2)
-			>> st->chip_info->channels[0].scan_type.realbits;
-		*val =  scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = st->range * 2;
+		*val2 = st->chip_info->channels[0].scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -425,8 +422,7 @@
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	if (iio_buffer_enabled(indio_dev)) {
-		if (!work_pending(&st->poll_work))
-			schedule_work(&st->poll_work);
+		schedule_work(&st->poll_work);
 	} else {
 		st->done = true;
 		wake_up_interruptible(&st->wq_data_avail);
@@ -466,12 +462,11 @@
 	struct ad7606_platform_data *pdata = dev->platform_data;
 	struct ad7606_state *st;
 	int ret;
-	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+	struct iio_dev *indio_dev;
 
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
 
 	st = iio_priv(indio_dev);
 
@@ -489,11 +484,11 @@
 		st->oversampling = pdata->default_os;
 	}
 
-	st->reg = regulator_get(dev, "vcc");
+	st->reg = devm_regulator_get(dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
-			goto error_put_reg;
+			return ERR_PTR(ret);
 	}
 
 	st->pdata = pdata;
@@ -554,11 +549,6 @@
 error_disable_reg:
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-error_put_reg:
-	if (!IS_ERR(st->reg))
-		regulator_put(st->reg);
-	iio_device_free(indio_dev);
-error_ret:
 	return ERR_PTR(ret);
 }
 
@@ -570,13 +560,10 @@
 	ad7606_ring_cleanup(indio_dev);
 
 	free_irq(irq, indio_dev);
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
 
 	ad7606_free_gpios(st);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7606_ring.c b/drivers/staging/iio/adc/ad7606_ring.c
index 2b25cb0..3bf174c 100644
--- a/drivers/staging/iio/adc/ad7606_ring.c
+++ b/drivers/staging/iio/adc/ad7606_ring.c
@@ -46,7 +46,6 @@
 	struct ad7606_state *st = container_of(work_s, struct ad7606_state,
 						poll_work);
 	struct iio_dev *indio_dev = iio_priv_to_dev(st);
-	s64 time_ns;
 	__u8 *buf;
 	int ret;
 
@@ -78,12 +77,7 @@
 			goto done;
 	}
 
-	time_ns = iio_get_time_ns();
-
-	if (indio_dev->scan_timestamp)
-		*((s64 *)(buf + indio_dev->scan_bytes - sizeof(s64))) = time_ns;
-
-	iio_push_to_buffers(indio_dev, buf);
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
 done:
 	gpio_set_value(st->pdata->gpio_convst, 0);
 	iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index e1f8860..273add3 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -90,17 +90,14 @@
 			   long m)
 {
 	struct ad7780_state *st = iio_priv(indio_dev);
-	unsigned long scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
 		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->int_vref_mv * 100000 * st->gain)
-			>> (chan->scan_type.realbits - 1);
-		*val =  scale_uv / 100000;
-		*val2 = (scale_uv % 100000) * 10;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = st->int_vref_mv * st->gain;
+		*val2 = chan->scan_type.realbits - 1;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
 		*val -= (1 << (chan->scan_type.realbits - 1));
 		return IIO_VAL_INT;
@@ -171,7 +168,7 @@
 	struct iio_dev *indio_dev;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_device_alloc(sizeof(*st));
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -180,11 +177,11 @@
 
 	ad_sd_init(&st->sd, indio_dev, spi, &ad7780_sigma_delta_info);
 
-	st->reg = regulator_get(&spi->dev, "vcc");
+	st->reg = devm_regulator_get(&spi->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 
 		voltage_uv = regulator_get_voltage(st->reg);
 	}
@@ -210,8 +207,8 @@
 
 	if (pdata && gpio_is_valid(pdata->gpio_pdrst)) {
 
-		ret = gpio_request_one(pdata->gpio_pdrst, GPIOF_OUT_INIT_LOW,
-			       "AD7780 /PDRST");
+		ret = devm_gpio_request_one(&spi->dev, pdata->gpio_pdrst,
+					GPIOF_OUT_INIT_LOW, "AD7780 /PDRST");
 		if (ret) {
 			dev_err(&spi->dev, "failed to request GPIO PDRST\n");
 			goto error_disable_reg;
@@ -223,7 +220,7 @@
 
 	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
 	if (ret)
-		goto error_free_gpio;
+		goto error_disable_reg;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
@@ -233,17 +230,9 @@
 
 error_cleanup_buffer_and_trigger:
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_free_gpio:
-	if (pdata && gpio_is_valid(pdata->gpio_pdrst))
-		gpio_free(pdata->gpio_pdrst);
 error_disable_reg:
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-error_put_reg:
-	if (!IS_ERR(st->reg))
-		regulator_put(st->reg);
-
-	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -256,14 +245,8 @@
 	iio_device_unregister(indio_dev);
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
 
-	if (gpio_is_valid(st->powerdown_gpio))
-		gpio_free(st->powerdown_gpio);
-
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
index 8470036..9f48e5c 100644
--- a/drivers/staging/iio/adc/ad7816.c
+++ b/drivers/staging/iio/adc/ad7816.c
@@ -356,11 +356,9 @@
 		return -EINVAL;
 	}
 
-	indio_dev = iio_device_alloc(sizeof(*chip));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi_dev->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
 	chip = iio_priv(indio_dev);
 	/* this is only used for device removal purposes */
 	dev_set_drvdata(&spi_dev->dev, indio_dev);
@@ -372,25 +370,28 @@
 	chip->convert_pin = pins[1];
 	chip->busy_pin = pins[2];
 
-	ret = gpio_request(chip->rdwr_pin, spi_get_device_id(spi_dev)->name);
+	ret = devm_gpio_request(&spi_dev->dev, chip->rdwr_pin,
+					spi_get_device_id(spi_dev)->name);
 	if (ret) {
 		dev_err(&spi_dev->dev, "Fail to request rdwr gpio PIN %d.\n",
 			chip->rdwr_pin);
-		goto error_free_device;
+		return ret;
 	}
 	gpio_direction_input(chip->rdwr_pin);
-	ret = gpio_request(chip->convert_pin, spi_get_device_id(spi_dev)->name);
+	ret = devm_gpio_request(&spi_dev->dev, chip->convert_pin,
+					spi_get_device_id(spi_dev)->name);
 	if (ret) {
 		dev_err(&spi_dev->dev, "Fail to request convert gpio PIN %d.\n",
 			chip->convert_pin);
-		goto error_free_gpio_rdwr;
+		return ret;
 	}
 	gpio_direction_input(chip->convert_pin);
-	ret = gpio_request(chip->busy_pin, spi_get_device_id(spi_dev)->name);
+	ret = devm_gpio_request(&spi_dev->dev, chip->busy_pin,
+					spi_get_device_id(spi_dev)->name);
 	if (ret) {
 		dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
 			chip->busy_pin);
-		goto error_free_gpio_convert;
+		return ret;
 	}
 	gpio_direction_input(chip->busy_pin);
 
@@ -401,51 +402,31 @@
 
 	if (spi_dev->irq) {
 		/* Only low trigger is supported in ad7816/7/8 */
-		ret = request_threaded_irq(spi_dev->irq,
-					   NULL,
-					   &ad7816_event_handler,
-					   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-					   indio_dev->name,
-					   indio_dev);
+		ret = devm_request_threaded_irq(&spi_dev->dev, spi_dev->irq,
+						NULL,
+						&ad7816_event_handler,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						indio_dev->name,
+						indio_dev);
 		if (ret)
-			goto error_free_gpio;
+			return ret;
 	}
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_irq;
+		return ret;
 
 	dev_info(&spi_dev->dev, "%s temperature sensor and ADC registered.\n",
 			 indio_dev->name);
 
 	return 0;
-error_free_irq:
-	free_irq(spi_dev->irq, indio_dev);
-error_free_gpio:
-	gpio_free(chip->busy_pin);
-error_free_gpio_convert:
-	gpio_free(chip->convert_pin);
-error_free_gpio_rdwr:
-	gpio_free(chip->rdwr_pin);
-error_free_device:
-	iio_device_free(indio_dev);
-error_ret:
-	return ret;
 }
 
 static int ad7816_remove(struct spi_device *spi_dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(&spi_dev->dev);
-	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	dev_set_drvdata(&spi_dev->dev, NULL);
-	if (spi_dev->irq)
-		free_irq(spi_dev->irq, indio_dev);
-	gpio_free(chip->busy_pin);
-	gpio_free(chip->convert_pin);
-	gpio_free(chip->rdwr_pin);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h
index b51680c..a591aa6 100644
--- a/drivers/staging/iio/adc/ad799x.h
+++ b/drivers/staging/iio/adc/ad799x.h
@@ -36,18 +36,10 @@
 #define AD7998_ALERT_STAT_REG			0x1
 #define AD7998_CONF_REG				0x2
 #define AD7998_CYCLE_TMR_REG			0x3
-#define AD7998_DATALOW_CH1_REG			0x4
-#define AD7998_DATAHIGH_CH1_REG			0x5
-#define AD7998_HYST_CH1_REG			0x6
-#define AD7998_DATALOW_CH2_REG			0x7
-#define AD7998_DATAHIGH_CH2_REG			0x8
-#define AD7998_HYST_CH2_REG			0x9
-#define AD7998_DATALOW_CH3_REG			0xA
-#define AD7998_DATAHIGH_CH3_REG			0xB
-#define AD7998_HYST_CH3_REG			0xC
-#define AD7998_DATALOW_CH4_REG			0xD
-#define AD7998_DATAHIGH_CH4_REG			0xE
-#define AD7998_HYST_CH4_REG			0xF
+
+#define AD7998_DATALOW_REG(x)			((x) * 3 + 0x4)
+#define AD7998_DATAHIGH_REG(x)			((x) * 3 + 0x5)
+#define AD7998_HYST_REG(x)			((x) * 3 + 0x6)
 
 #define AD7998_CYC_MASK				0x7
 #define AD7998_CYC_DIS				0x0
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index 2b2049c..9428be8 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -163,7 +163,6 @@
 {
 	int ret;
 	struct ad799x_state *st = iio_priv(indio_dev);
-	unsigned int scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -180,10 +179,9 @@
 			RES_MASK(chan->scan_type.realbits);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		scale_uv = (st->int_vref_mv * 1000) >> chan->scan_type.realbits;
-		*val =  scale_uv / 1000;
-		*val2 = (scale_uv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = st->int_vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 	return -EINVAL;
 }
@@ -254,98 +252,70 @@
 }
 
 static int ad799x_read_event_config(struct iio_dev *indio_dev,
-				    u64 event_code)
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir)
 {
 	return 1;
 }
 
-static const u8 ad799x_threshold_addresses[][2] = {
-	{ AD7998_DATALOW_CH1_REG, AD7998_DATAHIGH_CH1_REG },
-	{ AD7998_DATALOW_CH2_REG, AD7998_DATAHIGH_CH2_REG },
-	{ AD7998_DATALOW_CH3_REG, AD7998_DATAHIGH_CH3_REG },
-	{ AD7998_DATALOW_CH4_REG, AD7998_DATAHIGH_CH4_REG },
-};
+static unsigned int ad799x_threshold_reg(const struct iio_chan_spec *chan,
+					 enum iio_event_direction dir,
+					 enum iio_event_info info)
+{
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		if (dir == IIO_EV_DIR_FALLING)
+			return AD7998_DATALOW_REG(chan->channel);
+		else
+			return AD7998_DATAHIGH_REG(chan->channel);
+	case IIO_EV_INFO_HYSTERESIS:
+		return AD7998_HYST_REG(chan->channel);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
 
 static int ad799x_write_event_value(struct iio_dev *indio_dev,
-				    u64 event_code,
-				    int val)
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int val, int val2)
 {
 	int ret;
 	struct ad799x_state *st = iio_priv(indio_dev);
-	int direction = !!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			   IIO_EV_DIR_FALLING);
-	int number = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
 
 	mutex_lock(&indio_dev->mlock);
-	ret = ad799x_i2c_write16(st,
-				 ad799x_threshold_addresses[number][direction],
-				 val);
+	ret = ad799x_i2c_write16(st, ad799x_threshold_reg(chan, dir, info),
+		val);
 	mutex_unlock(&indio_dev->mlock);
 
 	return ret;
 }
 
 static int ad799x_read_event_value(struct iio_dev *indio_dev,
-				    u64 event_code,
-				    int *val)
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int *val, int *val2)
 {
 	int ret;
 	struct ad799x_state *st = iio_priv(indio_dev);
-	int direction = !!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			   IIO_EV_DIR_FALLING);
-	int number = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
 	u16 valin;
 
 	mutex_lock(&indio_dev->mlock);
-	ret = ad799x_i2c_read16(st,
-				ad799x_threshold_addresses[number][direction],
-				&valin);
+	ret = ad799x_i2c_read16(st, ad799x_threshold_reg(chan, dir, info),
+		&valin);
 	mutex_unlock(&indio_dev->mlock);
 	if (ret < 0)
 		return ret;
 	*val = valin;
 
-	return 0;
-}
-
-static ssize_t ad799x_read_channel_config(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad799x_state *st = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-
-	int ret;
-	u16 val;
-	ret = ad799x_i2c_read16(st, this_attr->address, &val);
-	if (ret)
-		return ret;
-
-	return sprintf(buf, "%d\n", val);
-}
-
-static ssize_t ad799x_write_channel_config(struct device *dev,
-					 struct device_attribute *attr,
-					 const char *buf,
-					 size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad799x_state *st = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-
-	long val;
-	int ret;
-
-	ret = kstrtol(buf, 10, &val);
-	if (ret)
-		return ret;
-
-	mutex_lock(&indio_dev->mlock);
-	ret = ad799x_i2c_write16(st, this_attr->address, val);
-	mutex_unlock(&indio_dev->mlock);
-
-	return ret ? ret : len;
+	return IIO_VAL_INT;
 }
 
 static irqreturn_t ad799x_event_handler(int irq, void *private)
@@ -383,60 +353,19 @@
 	return IRQ_HANDLED;
 }
 
-static IIO_DEVICE_ATTR(in_voltage0_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad799x_read_channel_config,
-		       ad799x_write_channel_config,
-		       AD7998_HYST_CH1_REG);
-
-static IIO_DEVICE_ATTR(in_voltage1_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad799x_read_channel_config,
-		       ad799x_write_channel_config,
-		       AD7998_HYST_CH2_REG);
-
-static IIO_DEVICE_ATTR(in_voltage2_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad799x_read_channel_config,
-		       ad799x_write_channel_config,
-		       AD7998_HYST_CH3_REG);
-
-static IIO_DEVICE_ATTR(in_voltage3_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad799x_read_channel_config,
-		       ad799x_write_channel_config,
-		       AD7998_HYST_CH4_REG);
-
 static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
 			      ad799x_read_frequency,
 			      ad799x_write_frequency);
 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("15625 7812 3906 1953 976 488 244 0");
 
-static struct attribute *ad7993_4_7_8_event_attributes[] = {
-	&iio_dev_attr_in_voltage0_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage1_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage2_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage3_thresh_both_hyst_raw.dev_attr.attr,
+static struct attribute *ad799x_event_attributes[] = {
 	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
 	NULL,
 };
 
-static struct attribute_group ad7993_4_7_8_event_attrs_group = {
-	.attrs = ad7993_4_7_8_event_attributes,
-	.name = "events",
-};
-
-static struct attribute *ad7992_event_attributes[] = {
-	&iio_dev_attr_in_voltage0_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage1_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
-	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
-	NULL,
-};
-
-static struct attribute_group ad7992_event_attrs_group = {
-	.attrs = ad7992_event_attributes,
+static struct attribute_group ad799x_event_attrs_group = {
+	.attrs = ad799x_event_attributes,
 	.name = "events",
 };
 
@@ -445,29 +374,35 @@
 	.driver_module = THIS_MODULE,
 };
 
-static const struct iio_info ad7992_info = {
-	.read_raw = &ad799x_read_raw,
-	.event_attrs = &ad7992_event_attrs_group,
-	.read_event_config = &ad799x_read_event_config,
-	.read_event_value = &ad799x_read_event_value,
-	.write_event_value = &ad799x_write_event_value,
-	.driver_module = THIS_MODULE,
-};
-
 static const struct iio_info ad7993_4_7_8_info = {
 	.read_raw = &ad799x_read_raw,
-	.event_attrs = &ad7993_4_7_8_event_attrs_group,
-	.read_event_config = &ad799x_read_event_config,
-	.read_event_value = &ad799x_read_event_value,
-	.write_event_value = &ad799x_write_event_value,
+	.event_attrs = &ad799x_event_attrs_group,
+	.read_event_config_new = &ad799x_read_event_config,
+	.read_event_value_new = &ad799x_read_event_value,
+	.write_event_value_new = &ad799x_write_event_value,
 	.driver_module = THIS_MODULE,
 	.update_scan_mode = ad7997_8_update_scan_mode,
 };
 
-#define AD799X_EV_MASK (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
-			IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
+static const struct iio_event_spec ad799x_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
+	},
+};
 
-#define AD799X_CHANNEL(_index, _realbits, _evmask) { \
+#define _AD799X_CHANNEL(_index, _realbits, _ev_spec, _num_ev_spec) { \
 	.type = IIO_VOLTAGE, \
 	.indexed = 1, \
 	.channel = (_index), \
@@ -475,16 +410,24 @@
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
 	.scan_index = (_index), \
 	.scan_type = IIO_ST('u', _realbits, 16, 12 - (_realbits)), \
-	.event_mask = (_evmask), \
+	.event_spec = _ev_spec, \
+	.num_event_specs = _num_ev_spec, \
 }
 
+#define AD799X_CHANNEL(_index, _realbits) \
+	_AD799X_CHANNEL(_index, _realbits, NULL, 0)
+
+#define AD799X_CHANNEL_WITH_EVENTS(_index, _realbits) \
+	_AD799X_CHANNEL(_index, _realbits, ad799x_events, \
+		ARRAY_SIZE(ad799x_events))
+
 static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 	[ad7991] = {
 		.channel = {
-			AD799X_CHANNEL(0, 12, 0),
-			AD799X_CHANNEL(1, 12, 0),
-			AD799X_CHANNEL(2, 12, 0),
-			AD799X_CHANNEL(3, 12, 0),
+			AD799X_CHANNEL(0, 12),
+			AD799X_CHANNEL(1, 12),
+			AD799X_CHANNEL(2, 12),
+			AD799X_CHANNEL(3, 12),
 			IIO_CHAN_SOFT_TIMESTAMP(4),
 		},
 		.num_channels = 5,
@@ -492,10 +435,10 @@
 	},
 	[ad7995] = {
 		.channel = {
-			AD799X_CHANNEL(0, 10, 0),
-			AD799X_CHANNEL(1, 10, 0),
-			AD799X_CHANNEL(2, 10, 0),
-			AD799X_CHANNEL(3, 10, 0),
+			AD799X_CHANNEL(0, 10),
+			AD799X_CHANNEL(1, 10),
+			AD799X_CHANNEL(2, 10),
+			AD799X_CHANNEL(3, 10),
 			IIO_CHAN_SOFT_TIMESTAMP(4),
 		},
 		.num_channels = 5,
@@ -503,10 +446,10 @@
 	},
 	[ad7999] = {
 		.channel = {
-			AD799X_CHANNEL(0, 8, 0),
-			AD799X_CHANNEL(1, 8, 0),
-			AD799X_CHANNEL(2, 8, 0),
-			AD799X_CHANNEL(3, 8, 0),
+			AD799X_CHANNEL(0, 8),
+			AD799X_CHANNEL(1, 8),
+			AD799X_CHANNEL(2, 8),
+			AD799X_CHANNEL(3, 8),
 			IIO_CHAN_SOFT_TIMESTAMP(4),
 		},
 		.num_channels = 5,
@@ -514,20 +457,20 @@
 	},
 	[ad7992] = {
 		.channel = {
-			AD799X_CHANNEL(0, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(1, 12, AD799X_EV_MASK),
+			AD799X_CHANNEL_WITH_EVENTS(0, 12),
+			AD799X_CHANNEL_WITH_EVENTS(1, 12),
 			IIO_CHAN_SOFT_TIMESTAMP(3),
 		},
 		.num_channels = 3,
 		.default_config = AD7998_ALERT_EN,
-		.info = &ad7992_info,
+		.info = &ad7993_4_7_8_info,
 	},
 	[ad7993] = {
 		.channel = {
-			AD799X_CHANNEL(0, 10, AD799X_EV_MASK),
-			AD799X_CHANNEL(1, 10, AD799X_EV_MASK),
-			AD799X_CHANNEL(2, 10, AD799X_EV_MASK),
-			AD799X_CHANNEL(3, 10, AD799X_EV_MASK),
+			AD799X_CHANNEL_WITH_EVENTS(0, 10),
+			AD799X_CHANNEL_WITH_EVENTS(1, 10),
+			AD799X_CHANNEL_WITH_EVENTS(2, 10),
+			AD799X_CHANNEL_WITH_EVENTS(3, 10),
 			IIO_CHAN_SOFT_TIMESTAMP(4),
 		},
 		.num_channels = 5,
@@ -536,10 +479,10 @@
 	},
 	[ad7994] = {
 		.channel = {
-			AD799X_CHANNEL(0, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(1, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(2, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(3, 12, AD799X_EV_MASK),
+			AD799X_CHANNEL_WITH_EVENTS(0, 12),
+			AD799X_CHANNEL_WITH_EVENTS(1, 12),
+			AD799X_CHANNEL_WITH_EVENTS(2, 12),
+			AD799X_CHANNEL_WITH_EVENTS(3, 12),
 			IIO_CHAN_SOFT_TIMESTAMP(4),
 		},
 		.num_channels = 5,
@@ -548,14 +491,14 @@
 	},
 	[ad7997] = {
 		.channel = {
-			AD799X_CHANNEL(0, 10, AD799X_EV_MASK),
-			AD799X_CHANNEL(1, 10, AD799X_EV_MASK),
-			AD799X_CHANNEL(2, 10, AD799X_EV_MASK),
-			AD799X_CHANNEL(3, 10, AD799X_EV_MASK),
-			AD799X_CHANNEL(4, 10, 0),
-			AD799X_CHANNEL(5, 10, 0),
-			AD799X_CHANNEL(6, 10, 0),
-			AD799X_CHANNEL(7, 10, 0),
+			AD799X_CHANNEL_WITH_EVENTS(0, 10),
+			AD799X_CHANNEL_WITH_EVENTS(1, 10),
+			AD799X_CHANNEL_WITH_EVENTS(2, 10),
+			AD799X_CHANNEL_WITH_EVENTS(3, 10),
+			AD799X_CHANNEL(4, 10),
+			AD799X_CHANNEL(5, 10),
+			AD799X_CHANNEL(6, 10),
+			AD799X_CHANNEL(7, 10),
 			IIO_CHAN_SOFT_TIMESTAMP(8),
 		},
 		.num_channels = 9,
@@ -564,14 +507,14 @@
 	},
 	[ad7998] = {
 		.channel = {
-			AD799X_CHANNEL(0, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(1, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(2, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(3, 12, AD799X_EV_MASK),
-			AD799X_CHANNEL(4, 12, 0),
-			AD799X_CHANNEL(5, 12, 0),
-			AD799X_CHANNEL(6, 12, 0),
-			AD799X_CHANNEL(7, 12, 0),
+			AD799X_CHANNEL_WITH_EVENTS(0, 12),
+			AD799X_CHANNEL_WITH_EVENTS(1, 12),
+			AD799X_CHANNEL_WITH_EVENTS(2, 12),
+			AD799X_CHANNEL_WITH_EVENTS(3, 12),
+			AD799X_CHANNEL(4, 12),
+			AD799X_CHANNEL(5, 12),
+			AD799X_CHANNEL(6, 12),
+			AD799X_CHANNEL(7, 12),
 			IIO_CHAN_SOFT_TIMESTAMP(8),
 		},
 		.num_channels = 9,
@@ -586,8 +529,9 @@
 	int ret;
 	struct ad799x_platform_data *pdata = client->dev.platform_data;
 	struct ad799x_state *st;
-	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+	struct iio_dev *indio_dev;
 
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -606,11 +550,11 @@
 
 	st->int_vref_mv = pdata->vref_mv;
 
-	st->reg = regulator_get(&client->dev, "vcc");
+	st->reg = devm_regulator_get(&client->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 	}
 	st->client = client;
 
@@ -650,10 +594,6 @@
 error_disable_reg:
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-error_put_reg:
-	if (!IS_ERR(st->reg))
-		regulator_put(st->reg);
-	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -668,12 +608,9 @@
 		free_irq(client->irq, indio_dev);
 
 	ad799x_ring_cleanup(indio_dev);
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
 	kfree(st->rx_buf);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
index c2ebae1..0ff6c03 100644
--- a/drivers/staging/iio/adc/ad799x_ring.c
+++ b/drivers/staging/iio/adc/ad799x_ring.c
@@ -35,7 +35,6 @@
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad799x_state *st = iio_priv(indio_dev);
-	s64 time_ns;
 	int b_sent;
 	u8 cmd;
 
@@ -65,13 +64,8 @@
 	if (b_sent < 0)
 		goto out;
 
-	time_ns = iio_get_time_ns();
-
-	if (indio_dev->scan_timestamp)
-		memcpy(st->rx_buf + indio_dev->scan_bytes - sizeof(s64),
-			&time_ns, sizeof(time_ns));
-
-	iio_push_to_buffers(indio_dev, st->rx_buf);
+	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+			iio_get_time_ns());
 out:
 	iio_trigger_notify_done(indio_dev->trig);
 
diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
index 9a4bb09..ef0a21d 100644
--- a/drivers/staging/iio/adc/lpc32xx_adc.c
+++ b/drivers/staging/iio/adc/lpc32xx_adc.c
@@ -137,43 +137,39 @@
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "failed to get platform I/O memory\n");
-		retval = -EBUSY;
-		goto errout1;
+		return -EBUSY;
 	}
 
-	iodev = iio_device_alloc(sizeof(struct lpc32xx_adc_info));
-	if (!iodev) {
-		dev_err(&pdev->dev, "failed allocating iio device\n");
-		retval = -ENOMEM;
-		goto errout1;
-	}
+	iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+	if (!iodev)
+		return -ENOMEM;
 
 	info = iio_priv(iodev);
 
-	info->adc_base = ioremap(res->start, resource_size(res));
+	info->adc_base = devm_ioremap(&pdev->dev, res->start,
+						resource_size(res));
 	if (!info->adc_base) {
 		dev_err(&pdev->dev, "failed mapping memory\n");
-		retval = -EBUSY;
-		goto errout2;
+		return -EBUSY;
 	}
 
-	info->clk = clk_get(&pdev->dev, NULL);
+	info->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(info->clk)) {
 		dev_err(&pdev->dev, "failed getting clock\n");
-		goto errout3;
+		return PTR_ERR(info->clk);
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if ((irq < 0) || (irq >= NR_IRQS)) {
+	if (irq <= 0) {
 		dev_err(&pdev->dev, "failed getting interrupt resource\n");
-		retval = -EINVAL;
-		goto errout4;
+		return -EINVAL;
 	}
 
-	retval = request_irq(irq, lpc32xx_adc_isr, 0, MOD_NAME, info);
+	retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
+								MOD_NAME, info);
 	if (retval < 0) {
 		dev_err(&pdev->dev, "failed requesting interrupt\n");
-		goto errout4;
+		return retval;
 	}
 
 	platform_set_drvdata(pdev, iodev);
@@ -189,35 +185,18 @@
 
 	retval = iio_device_register(iodev);
 	if (retval)
-		goto errout5;
+		return retval;
 
 	dev_info(&pdev->dev, "LPC32XX ADC driver loaded, IRQ %d\n", irq);
 
 	return 0;
-
-errout5:
-	free_irq(irq, info);
-errout4:
-	clk_put(info->clk);
-errout3:
-	iounmap(info->adc_base);
-errout2:
-	iio_device_free(iodev);
-errout1:
-	return retval;
 }
 
 static int lpc32xx_adc_remove(struct platform_device *pdev)
 {
 	struct iio_dev *iodev = platform_get_drvdata(pdev);
-	struct lpc32xx_adc_info *info = iio_priv(iodev);
-	int irq = platform_get_irq(pdev, 0);
 
 	iio_device_unregister(iodev);
-	free_irq(irq, info);
-	clk_put(info->clk);
-	iounmap(info->adc_base);
-	iio_device_free(iodev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index a08c173..aeae76b 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -35,6 +35,7 @@
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/clk.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -129,11 +130,24 @@
 	MXS_LRADC_TOUCHSCREEN_5WIRE,
 };
 
+/*
+ * Touchscreen handling
+ */
+enum lradc_ts_plate {
+	LRADC_TOUCH = 0,
+	LRADC_SAMPLE_X,
+	LRADC_SAMPLE_Y,
+	LRADC_SAMPLE_PRESSURE,
+	LRADC_SAMPLE_VALID,
+};
+
 struct mxs_lradc {
 	struct device		*dev;
 	void __iomem		*base;
 	int			irq[13];
 
+	struct clk		*clk;
+
 	uint32_t		*buffer;
 	struct iio_trigger	*trig;
 
@@ -169,32 +183,63 @@
 #define CHAN_MASK_TOUCHSCREEN_4WIRE	(0xf << 2)
 #define CHAN_MASK_TOUCHSCREEN_5WIRE	(0x1f << 2)
 	enum mxs_lradc_ts	use_touchscreen;
-	bool			stop_touchscreen;
 	bool			use_touchbutton;
 
 	struct input_dev	*ts_input;
-	struct work_struct	ts_work;
+
+	enum mxs_lradc_id	soc;
+	enum lradc_ts_plate	cur_plate; /* statemachine */
+	bool			ts_valid;
+	unsigned		ts_x_pos;
+	unsigned		ts_y_pos;
+	unsigned		ts_pressure;
+
+	/* handle touchscreen's physical behaviour */
+	/* samples per coordinate */
+	unsigned		over_sample_cnt;
+	/* time clocks between samples */
+	unsigned		over_sample_delay;
+	/* time in clocks to wait after the plates where switched */
+	unsigned		settling_delay;
 };
 
 #define	LRADC_CTRL0				0x00
-#define	LRADC_CTRL0_TOUCH_DETECT_ENABLE		(1 << 23)
-#define	LRADC_CTRL0_TOUCH_SCREEN_TYPE		(1 << 22)
-#define	LRADC_CTRL0_YNNSW	/* YM */	(1 << 21)
-#define	LRADC_CTRL0_YPNSW	/* YP */	(1 << 20)
-#define	LRADC_CTRL0_YPPSW	/* YP */	(1 << 19)
-#define	LRADC_CTRL0_XNNSW	/* XM */	(1 << 18)
-#define	LRADC_CTRL0_XNPSW	/* XM */	(1 << 17)
-#define	LRADC_CTRL0_XPPSW	/* XP */	(1 << 16)
-#define	LRADC_CTRL0_PLATE_MASK			(0x3f << 16)
+# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE	(1 << 23)
+# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE	(1 << 22)
+# define LRADC_CTRL0_MX28_YNNSW	/* YM */	(1 << 21)
+# define LRADC_CTRL0_MX28_YPNSW	/* YP */	(1 << 20)
+# define LRADC_CTRL0_MX28_YPPSW	/* YP */	(1 << 19)
+# define LRADC_CTRL0_MX28_XNNSW	/* XM */	(1 << 18)
+# define LRADC_CTRL0_MX28_XNPSW	/* XM */	(1 << 17)
+# define LRADC_CTRL0_MX28_XPPSW	/* XP */	(1 << 16)
+
+# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE	(1 << 20)
+# define LRADC_CTRL0_MX23_YM			(1 << 19)
+# define LRADC_CTRL0_MX23_XM			(1 << 18)
+# define LRADC_CTRL0_MX23_YP			(1 << 17)
+# define LRADC_CTRL0_MX23_XP			(1 << 16)
+
+# define LRADC_CTRL0_MX28_PLATE_MASK \
+		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
+		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
+		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
+		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
+
+# define LRADC_CTRL0_MX23_PLATE_MASK \
+		(LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
+		LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
+		LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
 
 #define	LRADC_CTRL1				0x10
 #define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		(1 << 24)
 #define	LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
-#define	LRADC_CTRL1_LRADC_IRQ_EN_MASK		(0x1fff << 16)
+#define	LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
+#define	LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK	(0x01ff << 16)
 #define	LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
 #define	LRADC_CTRL1_TOUCH_DETECT_IRQ		(1 << 8)
 #define	LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
-#define	LRADC_CTRL1_LRADC_IRQ_MASK		0x1fff
+#define	LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
+#define	LRADC_CTRL1_MX23_LRADC_IRQ_MASK		0x01ff
 #define	LRADC_CTRL1_LRADC_IRQ_OFFSET		0
 
 #define	LRADC_CTRL2				0x20
@@ -207,19 +252,33 @@
 #define	LRADC_CH_ACCUMULATE			(1 << 29)
 #define	LRADC_CH_NUM_SAMPLES_MASK		(0x1f << 24)
 #define	LRADC_CH_NUM_SAMPLES_OFFSET		24
+#define	LRADC_CH_NUM_SAMPLES(x) \
+				((x) << LRADC_CH_NUM_SAMPLES_OFFSET)
 #define	LRADC_CH_VALUE_MASK			0x3ffff
 #define	LRADC_CH_VALUE_OFFSET			0
 
 #define	LRADC_DELAY(n)				(0xd0 + (0x10 * (n)))
 #define	LRADC_DELAY_TRIGGER_LRADCS_MASK		(0xff << 24)
 #define	LRADC_DELAY_TRIGGER_LRADCS_OFFSET	24
+#define	LRADC_DELAY_TRIGGER(x) \
+				(((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \
+				LRADC_DELAY_TRIGGER_LRADCS_MASK)
 #define	LRADC_DELAY_KICK			(1 << 20)
 #define	LRADC_DELAY_TRIGGER_DELAYS_MASK		(0xf << 16)
 #define	LRADC_DELAY_TRIGGER_DELAYS_OFFSET	16
+#define	LRADC_DELAY_TRIGGER_DELAYS(x) \
+				(((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \
+				LRADC_DELAY_TRIGGER_DELAYS_MASK)
 #define	LRADC_DELAY_LOOP_COUNT_MASK		(0x1f << 11)
 #define	LRADC_DELAY_LOOP_COUNT_OFFSET		11
+#define	LRADC_DELAY_LOOP(x) \
+				(((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \
+				LRADC_DELAY_LOOP_COUNT_MASK)
 #define	LRADC_DELAY_DELAY_MASK			0x7ff
 #define	LRADC_DELAY_DELAY_OFFSET		0
+#define	LRADC_DELAY_DELAY(x) \
+				(((x) << LRADC_DELAY_DELAY_OFFSET) & \
+				LRADC_DELAY_DELAY_MASK)
 
 #define	LRADC_CTRL4				0x140
 #define	LRADC_CTRL4_LRADCSELECT_MASK(n)		(0xf << ((n) * 4))
@@ -228,6 +287,475 @@
 #define LRADC_RESOLUTION			12
 #define LRADC_SINGLE_SAMPLE_MASK		((1 << LRADC_RESOLUTION) - 1)
 
+static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg + STMP_OFFSET_REG_SET);
+}
+
+static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR);
+}
+
+static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg);
+}
+
+static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_PLATE_MASK;
+	else
+		return LRADC_CTRL0_MX28_PLATE_MASK;
+}
+
+static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK;
+	else
+		return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK;
+}
+
+static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
+	else
+		return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
+}
+
+static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE;
+	else
+		return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE;
+}
+
+static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM;
+	else
+		return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
+}
+
+static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM;
+	else
+		return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
+}
+
+static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM;
+	else
+		return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
+}
+
+static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc)
+{
+	return !!(readl(lradc->base + LRADC_STATUS) &
+					LRADC_STATUS_TOUCH_DETECT_RAW);
+}
+
+static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
+{
+	/*
+	 * prepare for oversampling conversion
+	 *
+	 * from the datasheet:
+	 * "The ACCUMULATE bit in the appropriate channel register
+	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
+	 * otherwise, the IRQs will not fire."
+	 */
+	mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE |
+			LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1),
+			LRADC_CH(ch));
+
+	/* from the datasheet:
+	 * "Software must clear this register in preparation for a
+	 * multi-cycle accumulation.
+	 */
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch));
+
+	/* prepare the delay/loop unit according to the oversampling count */
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) |
+		LRADC_DELAY_TRIGGER_DELAYS(0) |
+		LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
+		LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
+			LRADC_DELAY(3));
+
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) |
+			LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) |
+			LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
+
+	/* wake us again, when the complete conversion is done */
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch), LRADC_CTRL1);
+	/*
+	 * after changing the touchscreen plates setting
+	 * the signals need some initial time to settle. Start the
+	 * SoC's delay unit and start the conversion later
+	 * and automatically.
+	 */
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
+		LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */
+		LRADC_DELAY_KICK |
+		LRADC_DELAY_DELAY(lradc->settling_delay),
+			LRADC_DELAY(2));
+}
+
+/*
+ * Pressure detection is special:
+ * We want to do both required measurements for the pressure detection in
+ * one turn. Use the hardware features to chain both conversions and let the
+ * hardware report one interrupt if both conversions are done
+ */
+static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
+							unsigned ch2)
+{
+	u32 reg;
+
+	/*
+	 * prepare for oversampling conversion
+	 *
+	 * from the datasheet:
+	 * "The ACCUMULATE bit in the appropriate channel register
+	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
+	 * otherwise, the IRQs will not fire."
+	 */
+	reg = LRADC_CH_ACCUMULATE |
+		LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1);
+	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1));
+	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2));
+
+	/* from the datasheet:
+	 * "Software must clear this register in preparation for a
+	 * multi-cycle accumulation.
+	 */
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1));
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2));
+
+	/* prepare the delay/loop unit according to the oversampling count */
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch1) |
+		LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */
+		LRADC_DELAY_TRIGGER_DELAYS(0) |
+		LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
+		LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
+					LRADC_DELAY(3));
+
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) |
+			LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) |
+			LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
+
+	/* wake us again, when the conversions are done */
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch2), LRADC_CTRL1);
+	/*
+	 * after changing the touchscreen plates setting
+	 * the signals need some initial time to settle. Start the
+	 * SoC's delay unit and start the conversion later
+	 * and automatically.
+	 */
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
+		LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */
+		LRADC_DELAY_KICK |
+		LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2));
+}
+
+static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc,
+							unsigned channel)
+{
+	u32 reg;
+	unsigned num_samples, val;
+
+	reg = readl(lradc->base + LRADC_CH(channel));
+	if (reg & LRADC_CH_ACCUMULATE)
+		num_samples = lradc->over_sample_cnt;
+	else
+		num_samples = 1;
+
+	val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET;
+	return val / num_samples;
+}
+
+static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc,
+						unsigned ch1, unsigned ch2)
+{
+	u32 reg, mask;
+	unsigned pressure, m1, m2;
+
+	mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2);
+	reg = readl(lradc->base + LRADC_CTRL1) & mask;
+
+	while (reg != mask) {
+		reg = readl(lradc->base + LRADC_CTRL1) & mask;
+		dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg);
+	}
+
+	m1 = mxs_lradc_read_raw_channel(lradc, ch1);
+	m2 = mxs_lradc_read_raw_channel(lradc, ch2);
+
+	if (m2 == 0) {
+		dev_warn(lradc->dev, "Cannot calculate pressure\n");
+		return 1 << (LRADC_RESOLUTION - 1);
+	}
+
+	/* simply scale the value from 0 ... max ADC resolution */
+	pressure = m1;
+	pressure *= (1 << LRADC_RESOLUTION);
+	pressure /= m2;
+
+	dev_dbg(lradc->dev, "Pressure = %u\n", pressure);
+	return pressure;
+}
+
+#define TS_CH_XP 2
+#define TS_CH_YP 3
+#define TS_CH_XM 4
+#define TS_CH_YM 5
+
+static int mxs_lradc_read_ts_channel(struct mxs_lradc *lradc)
+{
+	u32 reg;
+	int val;
+
+	reg = readl(lradc->base + LRADC_CTRL1);
+
+	/* only channels 3 to 5 are of interest here */
+	if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YP)) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YP) |
+			LRADC_CTRL1_LRADC_IRQ(TS_CH_YP), LRADC_CTRL1);
+		val = mxs_lradc_read_raw_channel(lradc, TS_CH_YP);
+	} else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_XM)) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_XM) |
+			LRADC_CTRL1_LRADC_IRQ(TS_CH_XM), LRADC_CTRL1);
+		val = mxs_lradc_read_raw_channel(lradc, TS_CH_XM);
+	} else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YM)) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YM) |
+			LRADC_CTRL1_LRADC_IRQ(TS_CH_YM), LRADC_CTRL1);
+		val = mxs_lradc_read_raw_channel(lradc, TS_CH_YM);
+	} else {
+		return -EIO;
+	}
+
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
+
+	return val;
+}
+
+/*
+ * YP(open)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ *    YM(-)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *         XP(weak+)        XM(open)
+ *
+ * "weak+" means 200k Ohm VDDIO
+ * (-) means GND
+ */
+static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc)
+{
+	/*
+	 * In order to detect a touch event the 'touch detect enable' bit
+	 * enables:
+	 *  - a weak pullup to the X+ connector
+	 *  - a strong ground at the Y- connector
+	 */
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc),
+				LRADC_CTRL0);
+}
+
+/*
+ * YP(meas)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ * YM(open)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *           XP(+)          XM(-)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_X;
+	mxs_lradc_setup_ts_channel(lradc, TS_CH_YP);
+}
+
+/*
+ *   YP(+)--+-------------+
+ *          |             |--+
+ *          |             |  |
+ *   YM(-)--+-------------+  |
+ *            +--------------+
+ *            |              |
+ *         XP(open)        XM(meas)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_Y;
+	mxs_lradc_setup_ts_channel(lradc, TS_CH_XM);
+}
+
+/*
+ *    YP(+)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ * YM(meas)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *          XP(meas)        XM(-)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_PRESSURE;
+	mxs_lradc_setup_ts_pressure(lradc, TS_CH_XP, TS_CH_YM);
+}
+
+static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
+{
+	mxs_lradc_setup_touch_detection(lradc);
+
+	lradc->cur_plate = LRADC_TOUCH;
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ |
+				LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+}
+
+static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc)
+{
+	input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos);
+	input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos);
+	input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure);
+	input_report_key(lradc->ts_input, BTN_TOUCH, 1);
+	input_sync(lradc->ts_input);
+}
+
+static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc)
+{
+	mxs_lradc_setup_touch_detection(lradc);
+	lradc->cur_plate = LRADC_SAMPLE_VALID;
+	/*
+	 * start a dummy conversion to burn time to settle the signals
+	 * note: we are not interested in the conversion's value
+	 */
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(5));
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(5), LRADC_CTRL1);
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << 5) |
+		LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */
+			LRADC_DELAY(2));
+}
+
+/*
+ * in order to avoid false measurements, report only samples where
+ * the surface is still touched after the position measurement
+ */
+static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid)
+{
+	/* if it is still touched, report the sample */
+	if (valid && mxs_lradc_check_touch_event(lradc)) {
+		lradc->ts_valid = true;
+		mxs_lradc_report_ts_event(lradc);
+	}
+
+	/* if it is even still touched, continue with the next measurement */
+	if (mxs_lradc_check_touch_event(lradc)) {
+		mxs_lradc_prepare_y_pos(lradc);
+		return;
+	}
+
+	if (lradc->ts_valid) {
+		/* signal the release */
+		lradc->ts_valid = false;
+		input_report_key(lradc->ts_input, BTN_TOUCH, 0);
+		input_sync(lradc->ts_input);
+	}
+
+	/* if it is released, wait for the next touch via IRQ */
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+}
+
+/* touchscreen's state machine */
+static void mxs_lradc_handle_touch(struct mxs_lradc *lradc)
+{
+	int val;
+
+	switch (lradc->cur_plate) {
+	case LRADC_TOUCH:
+		/*
+		 * start with the Y-pos, because it uses nearly the same plate
+		 * settings like the touch detection
+		 */
+		if (mxs_lradc_check_touch_event(lradc)) {
+			mxs_lradc_reg_clear(lradc,
+					LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
+					LRADC_CTRL1);
+			mxs_lradc_prepare_y_pos(lradc);
+		}
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ,
+					LRADC_CTRL1);
+		return;
+
+	case LRADC_SAMPLE_Y:
+		val = mxs_lradc_read_ts_channel(lradc);
+		if (val < 0) {
+			mxs_lradc_enable_touch_detection(lradc); /* re-start */
+			return;
+		}
+		lradc->ts_y_pos = val;
+		mxs_lradc_prepare_x_pos(lradc);
+		return;
+
+	case LRADC_SAMPLE_X:
+		val = mxs_lradc_read_ts_channel(lradc);
+		if (val < 0) {
+			mxs_lradc_enable_touch_detection(lradc); /* re-start */
+			return;
+		}
+		lradc->ts_x_pos = val;
+		mxs_lradc_prepare_pressure(lradc);
+		return;
+
+	case LRADC_SAMPLE_PRESSURE:
+		lradc->ts_pressure =
+			mxs_lradc_read_ts_pressure(lradc, TS_CH_XP, TS_CH_YM);
+		mxs_lradc_complete_touch_event(lradc);
+		return;
+
+	case LRADC_SAMPLE_VALID:
+		val = mxs_lradc_read_ts_channel(lradc); /* ignore the value */
+		mxs_lradc_finish_touch_event(lradc, 1);
+		break;
+	}
+}
+
 /*
  * Raw I/O operations
  */
@@ -262,21 +790,20 @@
 	 * Virtual channel 0 is always used here as the others are always not
 	 * used if doing raw sampling.
 	 */
-	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
-	writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
+			LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
 
 	/* Clean the slot's previous content, then set new one. */
-	writel(LRADC_CTRL4_LRADCSELECT_MASK(0),
-		lradc->base + LRADC_CTRL4 + STMP_OFFSET_REG_CLR);
-	writel(chan->channel, lradc->base + LRADC_CTRL4 + STMP_OFFSET_REG_SET);
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, chan->channel, LRADC_CTRL4);
 
-	writel(0, lradc->base + LRADC_CH(0));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0));
 
 	/* Enable the IRQ and start sampling the channel. */
-	writel(LRADC_CTRL1_LRADC_IRQ_EN(0),
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET);
-	writel(1 << 0, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, 1 << 0, LRADC_CTRL0);
 
 	/* Wait for completion on the channel, 1 second max. */
 	ret = wait_for_completion_killable_timeout(&lradc->completion, HZ);
@@ -290,8 +817,7 @@
 	ret = IIO_VAL_INT;
 
 err:
-	writel(LRADC_CTRL1_LRADC_IRQ_EN(0),
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
 
 	mutex_unlock(&lradc->lock);
 
@@ -303,220 +829,33 @@
 	.read_raw		= mxs_lradc_read_raw,
 };
 
-/*
- * Touchscreen handling
- */
-enum lradc_ts_plate {
-	LRADC_SAMPLE_X,
-	LRADC_SAMPLE_Y,
-	LRADC_SAMPLE_PRESSURE,
-};
-
-static int mxs_lradc_ts_touched(struct mxs_lradc *lradc)
-{
-	uint32_t reg;
-
-	/* Enable touch detection. */
-	writel(LRADC_CTRL0_PLATE_MASK,
-		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
-	writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
-		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
-
-	msleep(LRADC_TS_SAMPLE_DELAY_MS);
-
-	reg = readl(lradc->base + LRADC_STATUS);
-
-	return reg & LRADC_STATUS_TOUCH_DETECT_RAW;
-}
-
-static int32_t mxs_lradc_ts_sample(struct mxs_lradc *lradc,
-				enum lradc_ts_plate plate, int change)
-{
-	unsigned long delay, jiff;
-	uint32_t reg, ctrl0 = 0, chan = 0;
-	/* The touchscreen always uses CTRL4 slot #7. */
-	const uint8_t slot = 7;
-	uint32_t val;
-
-	/*
-	 * There are three correct configurations of the controller sampling
-	 * the touchscreen, each of these configuration provides different
-	 * information from the touchscreen.
-	 *
-	 * The following table describes the sampling configurations:
-	 * +-------------+-------+-------+-------+
-	 * | Wire \ Axis |   X   |   Y   |   Z   |
-	 * +---------------------+-------+-------+
-	 * |   X+ (CH2)  |   HI  |   TS  |   TS  |
-	 * +-------------+-------+-------+-------+
-	 * |   X- (CH4)  |   LO  |   SH  |   HI  |
-	 * +-------------+-------+-------+-------+
-	 * |   Y+ (CH3)  |   SH  |   HI  |   HI  |
-	 * +-------------+-------+-------+-------+
-	 * |   Y- (CH5)  |   TS  |   LO  |   SH  |
-	 * +-------------+-------+-------+-------+
-	 *
-	 * HI ... strong '1'  ; LO ... strong '0'
-	 * SH ... sample here ; TS ... tri-state
-	 *
-	 * There are a few other ways of obtaining the Z coordinate
-	 * (aka. pressure), but the one in the table seems to be the
-	 * most reliable one.
-	 */
-	switch (plate) {
-	case LRADC_SAMPLE_X:
-		ctrl0 = LRADC_CTRL0_XPPSW | LRADC_CTRL0_XNNSW;
-		chan = 3;
-		break;
-	case LRADC_SAMPLE_Y:
-		ctrl0 = LRADC_CTRL0_YPPSW | LRADC_CTRL0_YNNSW;
-		chan = 4;
-		break;
-	case LRADC_SAMPLE_PRESSURE:
-		ctrl0 = LRADC_CTRL0_YPPSW | LRADC_CTRL0_XNNSW;
-		chan = 5;
-		break;
-	}
-
-	if (change) {
-		writel(LRADC_CTRL0_PLATE_MASK,
-			lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
-		writel(ctrl0, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
-
-		writel(LRADC_CTRL4_LRADCSELECT_MASK(slot),
-			lradc->base + LRADC_CTRL4 + STMP_OFFSET_REG_CLR);
-		writel(chan << LRADC_CTRL4_LRADCSELECT_OFFSET(slot),
-			lradc->base + LRADC_CTRL4 + STMP_OFFSET_REG_SET);
-	}
-
-	writel(0xffffffff, lradc->base + LRADC_CH(slot) + STMP_OFFSET_REG_CLR);
-	writel(1 << slot, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
-
-	delay = jiffies + msecs_to_jiffies(LRADC_TS_SAMPLE_DELAY_MS);
-	do {
-		jiff = jiffies;
-		reg = readl_relaxed(lradc->base + LRADC_CTRL1);
-		if (reg & LRADC_CTRL1_LRADC_IRQ(slot))
-			break;
-	} while (time_before(jiff, delay));
-
-	writel(LRADC_CTRL1_LRADC_IRQ(slot),
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
-
-	if (time_after_eq(jiff, delay))
-		return -ETIMEDOUT;
-
-	val = readl(lradc->base + LRADC_CH(slot));
-	val &= LRADC_CH_VALUE_MASK;
-
-	return val;
-}
-
-static int32_t mxs_lradc_ts_sample_filter(struct mxs_lradc *lradc,
-				enum lradc_ts_plate plate)
-{
-	int32_t val, tot = 0;
-	int i;
-
-	val = mxs_lradc_ts_sample(lradc, plate, 1);
-
-	/* Delay a bit so the touchscreen is stable. */
-	mdelay(2);
-
-	for (i = 0; i < LRADC_TS_SAMPLE_AMOUNT; i++) {
-		val = mxs_lradc_ts_sample(lradc, plate, 0);
-		tot += val;
-	}
-
-	return tot / LRADC_TS_SAMPLE_AMOUNT;
-}
-
-static void mxs_lradc_ts_work(struct work_struct *ts_work)
-{
-	struct mxs_lradc *lradc = container_of(ts_work,
-				struct mxs_lradc, ts_work);
-	int val_x, val_y, val_p;
-	bool valid = false;
-
-	while (mxs_lradc_ts_touched(lradc)) {
-		/* Disable touch detector so we can sample the touchscreen. */
-		writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
-			lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
-
-		if (likely(valid)) {
-			input_report_abs(lradc->ts_input, ABS_X, val_x);
-			input_report_abs(lradc->ts_input, ABS_Y, val_y);
-			input_report_abs(lradc->ts_input, ABS_PRESSURE, val_p);
-			input_report_key(lradc->ts_input, BTN_TOUCH, 1);
-			input_sync(lradc->ts_input);
-		}
-
-		valid = false;
-
-		val_x = mxs_lradc_ts_sample_filter(lradc, LRADC_SAMPLE_X);
-		if (val_x < 0)
-			continue;
-		val_y = mxs_lradc_ts_sample_filter(lradc, LRADC_SAMPLE_Y);
-		if (val_y < 0)
-			continue;
-		val_p = mxs_lradc_ts_sample_filter(lradc, LRADC_SAMPLE_PRESSURE);
-		if (val_p < 0)
-			continue;
-
-		valid = true;
-	}
-
-	input_report_abs(lradc->ts_input, ABS_PRESSURE, 0);
-	input_report_key(lradc->ts_input, BTN_TOUCH, 0);
-	input_sync(lradc->ts_input);
-
-	/* Do not restart the TS IRQ if the driver is shutting down. */
-	if (lradc->stop_touchscreen)
-		return;
-
-	/* Restart the touchscreen interrupts. */
-	writel(LRADC_CTRL1_TOUCH_DETECT_IRQ,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
-	writel(LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET);
-}
-
 static int mxs_lradc_ts_open(struct input_dev *dev)
 {
 	struct mxs_lradc *lradc = input_get_drvdata(dev);
 
-	/* The touchscreen is starting. */
-	lradc->stop_touchscreen = false;
-
 	/* Enable the touch-detect circuitry. */
-	writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
-		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
-
-	/* Enable the touch-detect IRQ. */
-	writel(LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET);
+	mxs_lradc_enable_touch_detection(lradc);
 
 	return 0;
 }
 
+static void mxs_lradc_disable_ts(struct mxs_lradc *lradc)
+{
+	/* stop all interrupts from firing */
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
+		LRADC_CTRL1_LRADC_IRQ_EN(2) | LRADC_CTRL1_LRADC_IRQ_EN(3) |
+		LRADC_CTRL1_LRADC_IRQ_EN(4) | LRADC_CTRL1_LRADC_IRQ_EN(5),
+		LRADC_CTRL1);
+
+	/* Power-down touchscreen touch-detect circuitry. */
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+}
+
 static void mxs_lradc_ts_close(struct input_dev *dev)
 {
 	struct mxs_lradc *lradc = input_get_drvdata(dev);
 
-	/* Indicate the touchscreen is stopping. */
-	lradc->stop_touchscreen = true;
-	mb();
-
-	/* Wait until touchscreen thread finishes any possible remnants. */
-	cancel_work_sync(&lradc->ts_work);
-
-	/* Disable touchscreen touch-detect IRQ. */
-	writel(LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
-
-	/* Power-down touchscreen touch-detect circuitry. */
-	writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
-		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
+	mxs_lradc_disable_ts(lradc);
 }
 
 static int mxs_lradc_ts_register(struct mxs_lradc *lradc)
@@ -529,10 +868,8 @@
 		return 0;
 
 	input = input_allocate_device();
-	if (!input) {
-		dev_err(dev, "Failed to allocate TS device!\n");
+	if (!input)
 		return -ENOMEM;
-	}
 
 	input->name = DRIVER_NAME;
 	input->id.bustype = BUS_HOST;
@@ -562,8 +899,7 @@
 	if (!lradc->use_touchscreen)
 		return;
 
-	cancel_work_sync(&lradc->ts_work);
-
+	mxs_lradc_disable_ts(lradc);
 	input_unregister_device(lradc->ts_input);
 }
 
@@ -576,31 +912,24 @@
 	struct mxs_lradc *lradc = iio_priv(iio);
 	unsigned long reg = readl(lradc->base + LRADC_CTRL1);
 	const uint32_t ts_irq_mask =
-		LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
-		LRADC_CTRL1_TOUCH_DETECT_IRQ;
+		LRADC_CTRL1_TOUCH_DETECT_IRQ |
+		LRADC_CTRL1_LRADC_IRQ(2) |
+		LRADC_CTRL1_LRADC_IRQ(3) |
+		LRADC_CTRL1_LRADC_IRQ(4) |
+		LRADC_CTRL1_LRADC_IRQ(5);
 
-	if (!(reg & LRADC_CTRL1_LRADC_IRQ_MASK))
+	if (!(reg & mxs_lradc_irq_mask(lradc)))
 		return IRQ_NONE;
 
-	/*
-	 * Touchscreen IRQ handling code has priority and therefore
-	 * is placed here. In case touchscreen IRQ arrives, disable
-	 * it ASAP
-	 */
-	if (reg & LRADC_CTRL1_TOUCH_DETECT_IRQ) {
-		writel(ts_irq_mask,
-			lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
-		if (!lradc->stop_touchscreen)
-			schedule_work(&lradc->ts_work);
-	}
+	if (lradc->use_touchscreen && (reg & ts_irq_mask))
+		mxs_lradc_handle_touch(lradc);
 
 	if (iio_buffer_enabled(iio))
 		iio_trigger_poll(iio->trig, iio_get_time_ns());
 	else if (reg & LRADC_CTRL1_LRADC_IRQ(0))
 		complete(&lradc->completion);
 
-	writel(reg & LRADC_CTRL1_LRADC_IRQ_MASK,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
+	mxs_lradc_reg_clear(lradc, reg & mxs_lradc_irq_mask(lradc), LRADC_CTRL1);
 
 	return IRQ_HANDLED;
 }
@@ -619,19 +948,13 @@
 
 	for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
 		lradc->buffer[j] = readl(lradc->base + LRADC_CH(j));
-		writel(chan_value, lradc->base + LRADC_CH(j));
+		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j));
 		lradc->buffer[j] &= LRADC_CH_VALUE_MASK;
 		lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP;
 		j++;
 	}
 
-	if (iio->scan_timestamp) {
-		s64 *timestamp = (s64 *)((u8 *)lradc->buffer +
-					ALIGN(j, sizeof(s64)));
-		*timestamp = pf->timestamp;
-	}
-
-	iio_push_to_buffers(iio, (u8 *)lradc->buffer);
+	iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp);
 
 	iio_trigger_notify_done(iio->trig);
 
@@ -644,7 +967,7 @@
 	struct mxs_lradc *lradc = iio_priv(iio);
 	const uint32_t st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR;
 
-	writel(LRADC_DELAY_KICK, lradc->base + LRADC_DELAY(0) + st);
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st);
 
 	return 0;
 }
@@ -716,38 +1039,30 @@
 		goto err_mem;
 	}
 
-	ret = iio_sw_buffer_preenable(iio);
-	if (ret < 0)
-		goto err_buf;
-
-	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
-	writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
+							LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
 
 	for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
 		ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
 		ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs);
 		ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs);
-		writel(chan_value, lradc->base + LRADC_CH(ofs));
+		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs));
 		bitmap_set(&enable, ofs, 1);
 		ofs++;
 	}
 
-	writel(LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK,
-		lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR);
-
-	writel(ctrl4_clr, lradc->base + LRADC_CTRL4 + STMP_OFFSET_REG_CLR);
-	writel(ctrl4_set, lradc->base + LRADC_CTRL4 + STMP_OFFSET_REG_SET);
-
-	writel(ctrl1_irq, lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET);
-
-	writel(enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET,
-		lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_SET);
+	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
+					LRADC_DELAY_KICK, LRADC_DELAY(0));
+	mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET,
+					LRADC_DELAY(0));
 
 	return 0;
 
-err_buf:
-	kfree(lradc->buffer);
 err_mem:
 	mutex_unlock(&lradc->lock);
 	return ret;
@@ -757,12 +1072,13 @@
 {
 	struct mxs_lradc *lradc = iio_priv(iio);
 
-	writel(LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK,
-		lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR);
+	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
+					LRADC_DELAY_KICK, LRADC_DELAY(0));
 
-	writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
-	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
+	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
+					LRADC_CTRL1);
 
 	kfree(lradc->buffer);
 	mutex_unlock(&lradc->lock);
@@ -857,24 +1173,25 @@
 		return ret;
 
 	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
-	writel(adc_cfg, lradc->base + LRADC_DELAY(0));
+	mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0));
 
 	/* Disable remaining DELAY CHANNELs */
-	writel(0, lradc->base + LRADC_DELAY(1));
-	writel(0, lradc->base + LRADC_DELAY(2));
-	writel(0, lradc->base + LRADC_DELAY(3));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
 
 	/* Configure the touchscreen type */
-	writel(LRADC_CTRL0_TOUCH_SCREEN_TYPE,
-		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
+	if (lradc->soc == IMX28_LRADC) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+							LRADC_CTRL0);
 
-	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) {
-		writel(LRADC_CTRL0_TOUCH_SCREEN_TYPE,
-			lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
+	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+		mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				LRADC_CTRL0);
 	}
 
 	/* Start internal temperature sensing. */
-	writel(0, lradc->base + LRADC_CTRL2);
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);
 
 	return 0;
 }
@@ -883,11 +1200,10 @@
 {
 	int i;
 
-	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
-		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
+	mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1);
 
 	for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++)
-		writel(0, lradc->base + LRADC_DELAY(i));
+		mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i));
 }
 
 static const struct of_device_id mxs_lradc_dt_ids[] = {
@@ -897,6 +1213,52 @@
 };
 MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
 
+static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc,
+						struct device_node *lradc_node)
+{
+	int ret;
+	u32 ts_wires = 0, adapt;
+
+	ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires",
+				&ts_wires);
+	if (ret)
+		return -ENODEV; /* touchscreen feature disabled */
+
+	switch (ts_wires) {
+	case 4:
+		lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
+		break;
+	case 5:
+		if (lradc->soc == IMX28_LRADC) {
+			lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
+			break;
+		}
+		/* fall through an error message for i.MX23 */
+	default:
+		dev_err(lradc->dev,
+			"Unsupported number of touchscreen wires (%d)\n",
+			ts_wires);
+		return -EINVAL;
+	}
+
+	lradc->over_sample_cnt = 4;
+	ret = of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt);
+	if (ret == 0)
+		lradc->over_sample_cnt = adapt;
+
+	lradc->over_sample_delay = 2;
+	ret = of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt);
+	if (ret == 0)
+		lradc->over_sample_delay = adapt;
+
+	lradc->settling_delay = 10;
+	ret = of_property_read_u32(lradc_node, "fsl,settling", &adapt);
+	if (ret == 0)
+		lradc->settling_delay = adapt;
+
+	return 0;
+}
+
 static int mxs_lradc_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
@@ -908,8 +1270,7 @@
 	struct mxs_lradc *lradc;
 	struct iio_dev *iio;
 	struct resource *iores;
-	uint32_t ts_wires = 0;
-	int ret = 0;
+	int ret = 0, touch_ret;
 	int i;
 
 	/* Allocate the IIO device. */
@@ -920,6 +1281,7 @@
 	}
 
 	lradc = iio_priv(iio);
+	lradc->soc = (enum mxs_lradc_id)of_id->data;
 
 	/* Grab the memory area */
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -928,20 +1290,18 @@
 	if (IS_ERR(lradc->base))
 		return PTR_ERR(lradc->base);
 
-	INIT_WORK(&lradc->ts_work, mxs_lradc_ts_work);
+	lradc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lradc->clk)) {
+		dev_err(dev, "Failed to get the delay unit clock\n");
+		return PTR_ERR(lradc->clk);
+	}
+	ret = clk_prepare_enable(lradc->clk);
+	if (ret != 0) {
+		dev_err(dev, "Failed to enable the delay unit clock\n");
+		return ret;
+	}
 
-	/* Check if touchscreen is enabled in DT. */
-	ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires",
-				&ts_wires);
-	if (ret)
-		dev_info(dev, "Touchscreen not enabled.\n");
-	else if (ts_wires == 4)
-		lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
-	else if (ts_wires == 5)
-		lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
-	else
-		dev_warn(dev, "Unsupported number of touchscreen wires (%d)\n",
-				ts_wires);
+	touch_ret = mxs_lradc_probe_touchscreen(lradc, node);
 
 	/* Grab all IRQ sources */
 	for (i = 0; i < of_cfg->irq_count; i++) {
@@ -985,9 +1345,11 @@
 		goto err_dev;
 
 	/* Register the touchscreen input device. */
-	ret = mxs_lradc_ts_register(lradc);
-	if (ret)
-		goto err_dev;
+	if (touch_ret == 0) {
+		ret = mxs_lradc_ts_register(lradc);
+		if (ret)
+			goto err_ts_register;
+	}
 
 	/* Register IIO device. */
 	ret = iio_device_register(iio);
@@ -1000,6 +1362,8 @@
 
 err_ts:
 	mxs_lradc_ts_unregister(lradc);
+err_ts_register:
+	mxs_lradc_hw_stop(lradc);
 err_dev:
 	mxs_lradc_trigger_remove(iio);
 err_trig:
@@ -1012,14 +1376,13 @@
 	struct iio_dev *iio = platform_get_drvdata(pdev);
 	struct mxs_lradc *lradc = iio_priv(iio);
 
-	mxs_lradc_ts_unregister(lradc);
-
-	mxs_lradc_hw_stop(lradc);
-
 	iio_device_unregister(iio);
-	iio_triggered_buffer_cleanup(iio);
+	mxs_lradc_ts_unregister(lradc);
+	mxs_lradc_hw_stop(lradc);
 	mxs_lradc_trigger_remove(iio);
+	iio_triggered_buffer_cleanup(iio);
 
+	clk_disable_unprepare(lradc->clk);
 	return 0;
 }
 
@@ -1038,3 +1401,4 @@
 MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
 MODULE_DESCRIPTION("Freescale i.MX28 LRADC driver");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c
index 20f2d55..970d9ed 100644
--- a/drivers/staging/iio/adc/spear_adc.c
+++ b/drivers/staging/iio/adc/spear_adc.c
@@ -146,7 +146,6 @@
 			  long mask)
 {
 	struct spear_adc_info *info = iio_priv(indio_dev);
-	u32 scale_mv;
 	u32 status;
 
 	switch (mask) {
@@ -168,10 +167,9 @@
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
-		scale_mv = (info->vref_external * 1000) >> DATA_BITS;
-		*val =  scale_mv / 1000;
-		*val2 = (scale_mv % 1000) * 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
+		*val = info->vref_external;
+		*val2 = DATA_BITS;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 
 	return -EINVAL;
@@ -320,7 +318,7 @@
 		return -ENOMEM;
 	}
 	info->adc_base_spear3xx =
-		(struct adc_regs_spear3xx *)info->adc_base_spear6xx;
+		(struct adc_regs_spear3xx __iomem *)info->adc_base_spear6xx;
 
 	info->clk = clk_get(dev, NULL);
 	if (IS_ERR(info->clk)) {
@@ -335,7 +333,7 @@
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if ((irq < 0) || (irq >= NR_IRQS)) {
+	if (irq <= 0) {
 		dev_err(dev, "failed getting interrupt resource\n");
 		ret = -EINVAL;
 		goto errout3;
diff --git a/drivers/staging/iio/addac/adt7316-i2c.c b/drivers/staging/iio/addac/adt7316-i2c.c
index ce7d91c..0feea55 100644
--- a/drivers/staging/iio/addac/adt7316-i2c.c
+++ b/drivers/staging/iio/addac/adt7316-i2c.c
@@ -138,6 +138,5 @@
 module_i2c_driver(adt7316_driver);
 
 MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
-MODULE_DESCRIPTION("I2C bus driver for Analog Devices ADT7316/7/9 and"
-			"ADT7516/7/8 digital temperature sensor, ADC and DAC");
+MODULE_DESCRIPTION("I2C bus driver for Analog Devices ADT7316/7/9 and ADT7516/7/8 digital temperature sensor, ADC and DAC");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/addac/adt7316-spi.c b/drivers/staging/iio/addac/adt7316-spi.c
index 0db8ef5..7f4f0a8 100644
--- a/drivers/staging/iio/addac/adt7316-spi.c
+++ b/drivers/staging/iio/addac/adt7316-spi.c
@@ -146,6 +146,5 @@
 module_spi_driver(adt7316_driver);
 
 MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
-MODULE_DESCRIPTION("SPI bus driver for Analog Devices ADT7316/7/8 and"
-			"ADT7516/7/9 digital temperature sensor, ADC and DAC");
+MODULE_DESCRIPTION("SPI bus driver for Analog Devices ADT7316/7/8 and ADT7516/7/9 digital temperature sensor, ADC and DAC");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index 1e13568..80266e8 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -412,13 +412,13 @@
 	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config2;
-	unsigned long data = 0;
+	u8 data;
 	int ret;
 
 	if (!(chip->config2 & ADT7316_AD_SINGLE_CH_MODE))
 		return -EPERM;
 
-	ret = strict_strtoul(buf, 10, &data);
+	ret = kstrtou8(buf, 10, &data);
 	if (ret)
 		return -EINVAL;
 
@@ -823,10 +823,10 @@
 	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 dac_config;
-	unsigned long data = 0;
+	u8 data;
 	int ret;
 
-	ret = strict_strtoul(buf, 16, &data);
+	ret = kstrtou8(buf, 16, &data);
 	if (ret || data > ADT7316_DA_2VREF_CH_MASK)
 		return -EINVAL;
 
@@ -878,13 +878,13 @@
 	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 dac_config;
-	unsigned long data;
+	u8 data;
 	int ret;
 
 	if (!(chip->config3 & ADT7316_DA_EN_VIA_DAC_LDCA))
 		return -EPERM;
 
-	ret = strict_strtoul(buf, 10, &data);
+	ret = kstrtou8(buf, 10, &data);
 	if (ret || data > ADT7316_DA_EN_MODE_MASK)
 		return -EINVAL;
 
@@ -933,7 +933,7 @@
 	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 ldac_config;
-	unsigned long data;
+	u8 data;
 	int ret;
 
 	if (chip->config3 & ADT7316_DA_EN_VIA_DAC_LDCA) {
@@ -941,7 +941,7 @@
 			ADT7316_DA_EN_MODE_LDAC)
 			return -EPERM;
 
-		ret = strict_strtoul(buf, 16, &data);
+		ret = kstrtou8(buf, 16, &data);
 		if (ret || data > ADT7316_LDAC_EN_DA_MASK)
 			return -EINVAL;
 
@@ -1079,11 +1079,11 @@
 	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 ldac_config;
-	unsigned long data;
+	u8 data;
 	int ret;
 
 	if ((chip->id & ID_FAMILY_MASK) == ID_ADT75XX) {
-		ret = strict_strtoul(buf, 16, &data);
+		ret = kstrtou8(buf, 16, &data);
 		if (ret || data > 3)
 			return -EINVAL;
 
@@ -1093,7 +1093,7 @@
 		else if (data & 0x2)
 			ldac_config |= ADT7516_DAC_CD_IN_VREF;
 	} else {
-		ret = strict_strtoul(buf, 16, &data);
+		ret = kstrtou8(buf, 16, &data);
 		if (ret)
 			return -EINVAL;
 
@@ -1281,11 +1281,11 @@
 static ssize_t adt7316_store_temp_offset(struct adt7316_chip_info *chip,
 		int offset_addr, const char *buf, size_t len)
 {
-	long data;
+	int data;
 	u8 val;
 	int ret;
 
-	ret = strict_strtol(buf, 10, &data);
+	ret = kstrtoint(buf, 10, &data);
 	if (ret || data > 127 || data < -128)
 		return -EINVAL;
 
@@ -1442,7 +1442,7 @@
 		int channel, const char *buf, size_t len)
 {
 	u8 msb, lsb, offset;
-	unsigned long data;
+	u16 data;
 	int ret;
 
 	if (channel >= ADT7316_DA_MSB_DATA_REGS ||
@@ -1454,7 +1454,7 @@
 
 	offset = chip->dac_bits - 8;
 
-	ret = strict_strtoul(buf, 10, &data);
+	ret = kstrtou16(buf, 10, &data);
 	if (ret || data >= (1 << chip->dac_bits))
 		return -EINVAL;
 
@@ -1830,11 +1830,11 @@
 {
 	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
-	unsigned long data;
+	u16 data;
 	int ret;
 	u8 mask;
 
-	ret = strict_strtoul(buf, 16, &data);
+	ret = kstrtou16(buf, 16, &data);
 	if (ret || data >= ADT7316_VDD_INT_MASK + 1)
 		return -EINVAL;
 
@@ -1901,7 +1901,7 @@
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
-	long data;
+	int data;
 	u8 val;
 	int ret;
 
@@ -1909,7 +1909,7 @@
 		this_attr->address > ADT7316_EX_TEMP_LOW)
 		return -EPERM;
 
-	ret = strict_strtol(buf, 10, &data);
+	ret = kstrtoint(buf, 10, &data);
 	if (ret)
 		return -EINVAL;
 
@@ -2106,11 +2106,9 @@
 	unsigned short *adt7316_platform_data = dev->platform_data;
 	int ret = 0;
 
-	indio_dev = iio_device_alloc(sizeof(*chip));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
 	chip = iio_priv(indio_dev);
 	/* this is only used for device removal purposes */
 	dev_set_drvdata(dev, indio_dev);
@@ -2146,58 +2144,44 @@
 		if (adt7316_platform_data[0])
 			chip->bus.irq_flags = adt7316_platform_data[0];
 
-		ret = request_threaded_irq(chip->bus.irq,
-					   NULL,
-					   &adt7316_event_handler,
-					   chip->bus.irq_flags | IRQF_ONESHOT,
-					   indio_dev->name,
-					   indio_dev);
+		ret = devm_request_threaded_irq(dev, chip->bus.irq,
+						NULL,
+						&adt7316_event_handler,
+						chip->bus.irq_flags |
+						IRQF_ONESHOT,
+						indio_dev->name,
+						indio_dev);
 		if (ret)
-			goto error_free_dev;
+			return ret;
 
 		if (chip->bus.irq_flags & IRQF_TRIGGER_HIGH)
 			chip->config1 |= ADT7316_INT_POLARITY;
 	}
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, chip->config1);
-	if (ret) {
-		ret = -EIO;
-		goto error_unreg_irq;
-	}
+	if (ret)
+		return -EIO;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, chip->config3);
-	if (ret) {
-		ret = -EIO;
-		goto error_unreg_irq;
-	}
+	if (ret)
+		return -EIO;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_unreg_irq;
+		return ret;
 
 	dev_info(dev, "%s temperature sensor, ADC and DAC registered.\n",
 			indio_dev->name);
 
 	return 0;
-
-error_unreg_irq:
-	free_irq(chip->bus.irq, indio_dev);
-error_free_dev:
-	iio_device_free(indio_dev);
-error_ret:
-	return ret;
 }
 EXPORT_SYMBOL(adt7316_probe);
 
 int adt7316_remove(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct adt7316_chip_info *chip = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (chip->bus.irq)
-		free_irq(chip->bus.irq, indio_dev);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index f4a0341..7e7f989 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -123,14 +123,14 @@
 	}
 }
 
-static int ad7150_read_event_config(struct iio_dev *indio_dev, u64 event_code)
+static int ad7150_read_event_config(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir)
 {
 	int ret;
 	u8 threshtype;
 	bool adaptive;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
-	int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			IIO_EV_DIR_RISING);
 
 	ret = i2c_smbus_read_byte_data(chip->client, AD7150_CFG);
 	if (ret < 0)
@@ -139,42 +139,47 @@
 	threshtype = (ret >> 5) & 0x03;
 	adaptive = !!(ret & 0x80);
 
-	switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+	switch (type) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
-		if (rising)
+		if (dir == IIO_EV_DIR_RISING)
 			return adaptive && (threshtype == 0x1);
 		else
 			return adaptive && (threshtype == 0x0);
 	case IIO_EV_TYPE_THRESH_ADAPTIVE:
-		if (rising)
+		if (dir == IIO_EV_DIR_RISING)
 			return adaptive && (threshtype == 0x3);
 		else
 			return adaptive && (threshtype == 0x2);
 
 	case IIO_EV_TYPE_THRESH:
-		if (rising)
+		if (dir == IIO_EV_DIR_RISING)
 			return !adaptive && (threshtype == 0x1);
 		else
 			return !adaptive && (threshtype == 0x0);
+	default:
+		break;
 	}
 	return -EINVAL;
 }
 
 /* lock should be held */
-static int ad7150_write_event_params(struct iio_dev *indio_dev, u64 event_code)
+static int ad7150_write_event_params(struct iio_dev *indio_dev,
+	 unsigned int chan, enum iio_event_type type,
+	 enum iio_event_direction dir)
 {
 	int ret;
 	u16 value;
 	u8 sens, timeout;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
-	int chan = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
-	int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			IIO_EV_DIR_RISING);
+	int rising = (dir == IIO_EV_DIR_RISING);
+	u64 event_code;
+
+	event_code = IIO_UNMOD_EVENT_CODE(IIO_CAPACITANCE, chan, type, dir);
 
 	if (event_code != chip->current_event)
 		return 0;
 
-	switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+	switch (type) {
 		/* Note completely different from the adaptive versions */
 	case IIO_EV_TYPE_THRESH:
 		value = chip->threshold[rising][chan];
@@ -211,18 +216,20 @@
 }
 
 static int ad7150_write_event_config(struct iio_dev *indio_dev,
-				     u64 event_code, int state)
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, int state)
 {
 	u8 thresh_type, cfg, adaptive;
 	int ret;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
-	int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			IIO_EV_DIR_RISING);
+	int rising = (dir == IIO_EV_DIR_RISING);
+	u64 event_code;
 
 	/* Something must always be turned on */
 	if (state == 0)
 		return -EINVAL;
 
+	event_code = IIO_UNMOD_EVENT_CODE(chan->type, chan->channel, type, dir);
 	if (event_code == chip->current_event)
 		return 0;
 	mutex_lock(&chip->state_lock);
@@ -232,7 +239,7 @@
 
 	cfg = ret & ~((0x03 << 5) | (0x1 << 7));
 
-	switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+	switch (type) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
 		adaptive = 1;
 		if (rising)
@@ -268,7 +275,7 @@
 	chip->current_event = event_code;
 
 	/* update control attributes */
-	ret = ad7150_write_event_params(indio_dev, event_code);
+	ret = ad7150_write_event_params(indio_dev, chan->channel, type, dir);
 error_ret:
 	mutex_unlock(&chip->state_lock);
 
@@ -276,53 +283,52 @@
 }
 
 static int ad7150_read_event_value(struct iio_dev *indio_dev,
-				   u64 event_code,
-				   int *val)
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir,
+				   enum iio_event_info info,
+				   int *val, int *val2)
 {
-	int chan = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
-	int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			IIO_EV_DIR_RISING);
+	int rising = (dir == IIO_EV_DIR_RISING);
 
 	/* Complex register sharing going on here */
-	switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+	switch (type) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
-		*val = chip->mag_sensitivity[rising][chan];
-		return 0;
-
+		*val = chip->mag_sensitivity[rising][chan->channel];
+		return IIO_VAL_INT;
 	case IIO_EV_TYPE_THRESH_ADAPTIVE:
-		*val = chip->thresh_sensitivity[rising][chan];
-		return 0;
-
+		*val = chip->thresh_sensitivity[rising][chan->channel];
+		return IIO_VAL_INT;
 	case IIO_EV_TYPE_THRESH:
-		*val = chip->threshold[rising][chan];
-		return 0;
-
+		*val = chip->threshold[rising][chan->channel];
+		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
-	};
+	}
 }
 
 static int ad7150_write_event_value(struct iio_dev *indio_dev,
-				   u64 event_code,
-				   int val)
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir,
+				   enum iio_event_info info,
+				   int val, int val2)
 {
 	int ret;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
-	int chan = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
-	int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			IIO_EV_DIR_RISING);
+	int rising = (dir == IIO_EV_DIR_RISING);
 
 	mutex_lock(&chip->state_lock);
-	switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+	switch (type) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
-		chip->mag_sensitivity[rising][chan] = val;
+		chip->mag_sensitivity[rising][chan->channel] = val;
 		break;
 	case IIO_EV_TYPE_THRESH_ADAPTIVE:
-		chip->thresh_sensitivity[rising][chan] = val;
+		chip->thresh_sensitivity[rising][chan->channel] = val;
 		break;
 	case IIO_EV_TYPE_THRESH:
-		chip->threshold[rising][chan] = val;
+		chip->threshold[rising][chan->channel] = val;
 		break;
 	default:
 		ret = -EINVAL;
@@ -330,7 +336,7 @@
 	}
 
 	/* write back if active */
-	ret = ad7150_write_event_params(indio_dev, event_code);
+	ret = ad7150_write_event_params(indio_dev, chan->channel, type, dir);
 
 error_ret:
 	mutex_unlock(&chip->state_lock);
@@ -374,17 +380,22 @@
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int chan = IIO_EVENT_CODE_EXTRACT_CHAN(this_attr->address);
-	int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(this_attr->address) ==
-			IIO_EV_DIR_RISING);
+	enum iio_event_direction dir;
+	enum iio_event_type type;
+	int rising;
 	u8 data;
 	int ret;
 
+	type = IIO_EVENT_CODE_EXTRACT_TYPE(this_attr->address);
+	dir = IIO_EVENT_CODE_EXTRACT_DIR(this_attr->address);
+	rising = (dir == IIO_EV_DIR_RISING);
+
 	ret = kstrtou8(buf, 10, &data);
 	if (ret < 0)
 		return ret;
 
 	mutex_lock(&chip->state_lock);
-	switch (IIO_EVENT_CODE_EXTRACT_TYPE(this_attr->address)) {
+	switch (type) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
 		chip->mag_timeout[rising][chan] = data;
 		break;
@@ -396,7 +407,7 @@
 		goto error_ret;
 	}
 
-	ret = ad7150_write_event_params(indio_dev, this_attr->address);
+	ret = ad7150_write_event_params(indio_dev, chan, type, dir);
 error_ret:
 	mutex_unlock(&chip->state_lock);
 
@@ -424,6 +435,40 @@
 static AD7150_TIMEOUT(1, thresh_adaptive, rising, THRESH_ADAPTIVE, RISING);
 static AD7150_TIMEOUT(1, thresh_adaptive, falling, THRESH_ADAPTIVE, FALLING);
 
+static const struct iio_event_spec ad7150_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH_ADAPTIVE,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH_ADAPTIVE,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_MAG_ADAPTIVE,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_MAG_ADAPTIVE,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
 static const struct iio_chan_spec ad7150_channels[] = {
 	{
 		.type = IIO_CAPACITANCE,
@@ -431,26 +476,16 @@
 		.channel = 0,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 		BIT(IIO_CHAN_INFO_AVERAGE_RAW),
-		.event_mask =
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) |
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH_ADAPTIVE, IIO_EV_DIR_RISING) |
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH_ADAPTIVE, IIO_EV_DIR_FALLING) |
-		IIO_EV_BIT(IIO_EV_TYPE_MAG_ADAPTIVE, IIO_EV_DIR_RISING) |
-		IIO_EV_BIT(IIO_EV_TYPE_MAG_ADAPTIVE, IIO_EV_DIR_FALLING)
+		.event_spec = ad7150_events,
+		.num_event_specs = ARRAY_SIZE(ad7150_events),
 	}, {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 1,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 		BIT(IIO_CHAN_INFO_AVERAGE_RAW),
-		.event_mask =
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) |
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH_ADAPTIVE, IIO_EV_DIR_RISING) |
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH_ADAPTIVE, IIO_EV_DIR_FALLING) |
-		IIO_EV_BIT(IIO_EV_TYPE_MAG_ADAPTIVE, IIO_EV_DIR_RISING) |
-		IIO_EV_BIT(IIO_EV_TYPE_MAG_ADAPTIVE, IIO_EV_DIR_FALLING)
+		.event_spec = ad7150_events,
+		.num_event_specs = ARRAY_SIZE(ad7150_events),
 	},
 };
 
@@ -541,10 +576,10 @@
 	.event_attrs = &ad7150_event_attribute_group,
 	.driver_module = THIS_MODULE,
 	.read_raw = &ad7150_read_raw,
-	.read_event_config = &ad7150_read_event_config,
-	.write_event_config = &ad7150_write_event_config,
-	.read_event_value = &ad7150_read_event_value,
-	.write_event_value = &ad7150_write_event_value,
+	.read_event_config_new = &ad7150_read_event_config,
+	.write_event_config_new = &ad7150_write_event_config,
+	.read_event_value_new = &ad7150_read_event_value,
+	.write_event_value_new = &ad7150_write_event_value,
 };
 
 /*
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 75a533b..862d68d 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -656,20 +656,21 @@
 		switch (chan->type) {
 		case IIO_CAPACITANCE:
 			/* 8.192pf / 2^24 */
-			*val2 = 488;
 			*val =  0;
+			*val2 = 488;
+			ret = IIO_VAL_INT_PLUS_NANO;
 			break;
 		case IIO_VOLTAGE:
 			/* 1170mV / 2^23 */
-			*val2 = 139475;
-			*val =  0;
+			*val = 1170;
+			*val2 = 23;
+			ret = IIO_VAL_FRACTIONAL_LOG2;
 			break;
 		default:
-			ret =  -EINVAL;
-			goto out;
+			ret = -EINVAL;
+			break;
 		}
 
-		ret = IIO_VAL_INT_PLUS_NANO;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/staging/iio/frequency/ad5930.c b/drivers/staging/iio/frequency/ad5930.c
index 69e90e9..a4aeee6 100644
--- a/drivers/staging/iio/frequency/ad5930.c
+++ b/drivers/staging/iio/frequency/ad5930.c
@@ -94,11 +94,9 @@
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_device_alloc(sizeof(*st));
-	if (idev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!idev)
+		return -ENOMEM;
 	spi_set_drvdata(spi, idev);
 	st = iio_priv(idev);
 
@@ -110,24 +108,18 @@
 
 	ret = iio_device_register(idev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 	spi->max_speed_hz = 2000000;
 	spi->mode = SPI_MODE_3;
 	spi->bits_per_word = 16;
 	spi_setup(spi);
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(idev);
-error_ret:
-	return ret;
 }
 
 static int ad5930_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index 4e18380..c7d0307 100644
--- a/drivers/staging/iio/frequency/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -81,9 +81,9 @@
 	struct ad9832_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	unsigned long val;
 
-	ret = strict_strtoul(buf, 10, &val);
+	ret = kstrtoul(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 
@@ -214,14 +214,14 @@
 		return -ENODEV;
 	}
 
-	reg = regulator_get(&spi->dev, "vcc");
+	reg = devm_regulator_get(&spi->dev, "vcc");
 	if (!IS_ERR(reg)) {
 		ret = regulator_enable(reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 	}
 
-	indio_dev = iio_device_alloc(sizeof(*st));
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -279,47 +279,42 @@
 	ret = spi_sync(st->spi, &st->msg);
 	if (ret) {
 		dev_err(&spi->dev, "device init failed\n");
-		goto error_free_device;
+		goto error_disable_reg;
 	}
 
 	ret = ad9832_write_frequency(st, AD9832_FREQ0HM, pdata->freq0);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9832_write_frequency(st, AD9832_FREQ1HM, pdata->freq1);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9832_write_phase(st, AD9832_PHASE0H, pdata->phase0);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9832_write_phase(st, AD9832_PHASE1H, pdata->phase1);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9832_write_phase(st, AD9832_PHASE2H, pdata->phase2);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9832_write_phase(st, AD9832_PHASE3H, pdata->phase3);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	return 0;
 
-error_free_device:
-	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
-error_put_reg:
-	if (!IS_ERR(reg))
-		regulator_put(reg);
 
 	return ret;
 }
@@ -330,11 +325,8 @@
 	struct ad9832_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 5cba3c0..86cda61 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -70,9 +70,9 @@
 	struct ad9834_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	unsigned long val;
 
-	ret = strict_strtoul(buf, 10, &val);
+	ret = kstrtoul(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 
@@ -327,14 +327,14 @@
 		return -ENODEV;
 	}
 
-	reg = regulator_get(&spi->dev, "vcc");
+	reg = devm_regulator_get(&spi->dev, "vcc");
 	if (!IS_ERR(reg)) {
 		ret = regulator_enable(reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 	}
 
-	indio_dev = iio_device_alloc(sizeof(*st));
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -388,39 +388,35 @@
 	ret = spi_sync(st->spi, &st->msg);
 	if (ret) {
 		dev_err(&spi->dev, "device init failed\n");
-		goto error_free_device;
+		goto error_disable_reg;
 	}
 
 	ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, pdata->freq0);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, pdata->freq1);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9834_write_phase(st, AD9834_REG_PHASE0, pdata->phase0);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = ad9834_write_phase(st, AD9834_REG_PHASE1, pdata->phase1);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_device;
+		goto error_disable_reg;
 
 	return 0;
 
-error_free_device:
-	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
-error_put_reg:
-	if (!IS_ERR(reg))
-		regulator_put(reg);
+
 	return ret;
 }
 
@@ -430,11 +426,8 @@
 	struct ad9834_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/ad9850.c b/drivers/staging/iio/frequency/ad9850.c
index 01a8a93..af877ff 100644
--- a/drivers/staging/iio/frequency/ad9850.c
+++ b/drivers/staging/iio/frequency/ad9850.c
@@ -80,11 +80,9 @@
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_device_alloc(sizeof(*st));
-	if (idev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!idev)
+		return -ENOMEM;
 	spi_set_drvdata(spi, idev);
 	st = iio_priv(idev);
 	mutex_init(&st->lock);
@@ -96,24 +94,18 @@
 
 	ret = iio_device_register(idev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 	spi->max_speed_hz = 2000000;
 	spi->mode = SPI_MODE_3;
 	spi->bits_per_word = 16;
 	spi_setup(spi);
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(idev);
-error_ret:
-	return ret;
 }
 
 static int ad9850_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/ad9852.c b/drivers/staging/iio/frequency/ad9852.c
index 1344031..11e4367 100644
--- a/drivers/staging/iio/frequency/ad9852.c
+++ b/drivers/staging/iio/frequency/ad9852.c
@@ -67,7 +67,6 @@
 					const char *buf,
 					size_t len)
 {
-	struct spi_message msg;
 	struct spi_transfer xfer;
 	int ret;
 	struct ad9852_config *config = (struct ad9852_config *)buf;
@@ -78,99 +77,77 @@
 	xfer.tx_buf = &config->phajst0[0];
 	mutex_lock(&st->lock);
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 3;
 	xfer.tx_buf = &config->phajst1[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 6;
 	xfer.tx_buf = &config->fretun1[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 6;
 	xfer.tx_buf = &config->fretun2[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 6;
 	xfer.tx_buf = &config->dltafre[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->updtclk[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 4;
 	xfer.tx_buf = &config->ramprat[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->control[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 3;
 	xfer.tx_buf = &config->outpskm[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 2;
 	xfer.tx_buf = &config->outpskr[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 3;
 	xfer.tx_buf = &config->daccntl[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 error_ret:
@@ -229,11 +206,9 @@
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_device_alloc(sizeof(*st));
-	if (idev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!idev)
+		return -ENOMEM;
 	st = iio_priv(idev);
 	spi_set_drvdata(spi, idev);
 	mutex_init(&st->lock);
@@ -245,7 +220,7 @@
 
 	ret = iio_device_register(idev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 	spi->max_speed_hz = 2000000;
 	spi->mode = SPI_MODE_3;
 	spi->bits_per_word = 8;
@@ -253,18 +228,11 @@
 	ad9852_init(st);
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(idev);
-
-error_ret:
-	return ret;
 }
 
 static int ad9852_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/ad9910.c b/drivers/staging/iio/frequency/ad9910.c
index e48f874..755e048 100644
--- a/drivers/staging/iio/frequency/ad9910.c
+++ b/drivers/staging/iio/frequency/ad9910.c
@@ -119,7 +119,6 @@
 					const char *buf,
 					size_t len)
 {
-	struct spi_message msg;
 	struct spi_transfer xfer;
 	int ret;
 	struct ad9910_config *config = (struct ad9910_config *)buf;
@@ -130,152 +129,118 @@
 	xfer.tx_buf = &config->auxdac[0];
 	mutex_lock(&st->lock);
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->ioupd[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->ftw[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 3;
 	xfer.tx_buf = &config->pow[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->asf[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->multc[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->dig_rampl[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->dig_ramps[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->dig_rampr[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep0[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep1[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep2[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep3[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep4[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep5[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep6[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 9;
 	xfer.tx_buf = &config->sin_tonep7[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 error_ret:
@@ -288,7 +253,6 @@
 
 static void ad9910_init(struct ad9910_state *st)
 {
-	struct spi_message msg;
 	struct spi_transfer xfer;
 	int ret;
 	u8 cfr[5];
@@ -304,9 +268,7 @@
 	xfer.len = 5;
 	xfer.tx_buf = &cfr;
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
@@ -319,9 +281,7 @@
 	xfer.len = 5;
 	xfer.tx_buf = &cfr;
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
@@ -334,9 +294,7 @@
 	xfer.len = 5;
 	xfer.tx_buf = &cfr;
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
@@ -367,11 +325,9 @@
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_device_alloc(sizeof(*st));
-	if (idev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!idev)
+		return -ENOMEM;
 	spi_set_drvdata(spi, idev);
 	st = iio_priv(idev);
 	mutex_init(&st->lock);
@@ -383,24 +339,18 @@
 
 	ret = iio_device_register(idev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 	spi->max_speed_hz = 2000000;
 	spi->mode = SPI_MODE_3;
 	spi->bits_per_word = 8;
 	spi_setup(spi);
 	ad9910_init(st);
 	return 0;
-
-error_free_dev:
-	iio_device_free(idev);
-error_ret:
-	return ret;
 }
 
 static int ad9910_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/ad9951.c b/drivers/staging/iio/frequency/ad9951.c
index 8234e3c..5e8990a 100644
--- a/drivers/staging/iio/frequency/ad9951.c
+++ b/drivers/staging/iio/frequency/ad9951.c
@@ -60,7 +60,6 @@
 					const char *buf,
 					size_t len)
 {
-	struct spi_message msg;
 	struct spi_transfer xfer;
 	int ret;
 	struct ad9951_config *config = (struct ad9951_config *)buf;
@@ -71,36 +70,28 @@
 	xfer.tx_buf = &config->asf[0];
 	mutex_lock(&st->lock);
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 2;
 	xfer.tx_buf = &config->arr[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 5;
 	xfer.tx_buf = &config->ftw0[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
 	xfer.len = 3;
 	xfer.tx_buf = &config->ftw1[0];
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 error_ret:
@@ -113,7 +104,6 @@
 
 static void ad9951_init(struct ad9951_state *st)
 {
-	struct spi_message msg;
 	struct spi_transfer xfer;
 	int ret;
 	u8 cfr[5];
@@ -129,9 +119,7 @@
 	xfer.len = 5;
 	xfer.tx_buf = &cfr;
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
@@ -143,9 +131,7 @@
 	xfer.len = 4;
 	xfer.tx_buf = &cfr;
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-	ret = spi_sync(st->sdev, &msg);
+	ret = spi_sync_transfer(st->sdev, &xfer, 1);
 	if (ret)
 		goto error_ret;
 
@@ -176,11 +162,9 @@
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_device_alloc(sizeof(*st));
-	if (idev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!idev)
+		return -ENOMEM;
 	spi_set_drvdata(spi, idev);
 	st = iio_priv(idev);
 	mutex_init(&st->lock);
@@ -193,25 +177,18 @@
 
 	ret = iio_device_register(idev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 	spi->max_speed_hz = 2000000;
 	spi->mode = SPI_MODE_3;
 	spi->bits_per_word = 8;
 	spi_setup(spi);
 	ad9951_init(st);
 	return 0;
-
-error_free_dev:
-	iio_device_free(idev);
-
-error_ret:
-	return ret;
 }
 
 static int ad9951_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
index 0e8e02a..1fac989 100644
--- a/drivers/staging/iio/iio_simple_dummy.c
+++ b/drivers/staging/iio/iio_simple_dummy.c
@@ -57,6 +57,20 @@
 	{ 733, 13, 0x9 }, /* 733.000013 */
 };
 
+#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
+
+/*
+ * simple event - triggered when value rises above
+ * a threshold
+ */
+static const struct iio_event_spec iio_dummy_event = {
+	.type = IIO_EV_TYPE_THRESH,
+	.dir = IIO_EV_DIR_RISING,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+};
+
+#endif
+
 /*
  * iio_dummy_channels - Description of available channels
  *
@@ -90,6 +104,11 @@
 		 * when converting to standard units (microvolts)
 		 */
 		BIT(IIO_CHAN_INFO_SCALE),
+		/*
+		 * sampling_frequency
+		 * The frequency in Hz at which the channels are sampled
+		 */
+		.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		/* The ordering of elements in the buffer via an enum */
 		.scan_index = voltage0,
 		.scan_type = { /* Description of storage in buffer */
@@ -99,12 +118,8 @@
 			.shift = 0, /* zero shift */
 		},
 #ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
-		/*
-		 * simple event - triggered when value rises above
-		 * a threshold
-		 */
-		.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH,
-					 IIO_EV_DIR_RISING),
+		.event_spec = &iio_dummy_event,
+		.num_event_specs = 1,
 #endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
 	},
 	/* Differential ADC channel in_voltage1-voltage2_raw etc*/
@@ -130,6 +145,10 @@
 		 * input channels of type IIO_VOLTAGE.
 		 */
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		/*
+		 * sampling_frequency
+		 * The frequency in Hz at which the channels are sampled
+		 */
 		.scan_index = diffvoltage1m2,
 		.scan_type = { /* Description of storage in buffer */
 			.sign = 's', /* signed */
@@ -147,6 +166,7 @@
 		.channel2 = 4,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.scan_index = diffvoltage3m4,
 		.scan_type = {
 			.sign = 's',
@@ -173,6 +193,7 @@
 		 */
 		BIT(IIO_CHAN_INFO_CALIBSCALE) |
 		BIT(IIO_CHAN_INFO_CALIBBIAS),
+		.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.scan_index = accelx,
 		.scan_type = { /* Description of storage in buffer */
 			.sign = 's', /* signed */
@@ -272,6 +293,11 @@
 		*val2 = st->accel_calibscale->val2;
 		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = 3;
+		*val2 = 33;
+		ret = IIO_VAL_INT_PLUS_NANO;
+		break;
 	default:
 		break;
 	}
@@ -344,10 +370,10 @@
 	.read_raw = &iio_dummy_read_raw,
 	.write_raw = &iio_dummy_write_raw,
 #ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
-	.read_event_config = &iio_simple_dummy_read_event_config,
-	.write_event_config = &iio_simple_dummy_write_event_config,
-	.read_event_value = &iio_simple_dummy_read_event_value,
-	.write_event_value = &iio_simple_dummy_write_event_value,
+	.read_event_config_new = &iio_simple_dummy_read_event_config,
+	.write_event_config_new = &iio_simple_dummy_write_event_config,
+	.read_event_value_new = &iio_simple_dummy_read_event_value,
+	.write_event_value_new = &iio_simple_dummy_write_event_value,
 #endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
 };
 
@@ -454,7 +480,8 @@
 	 * buffer, but avoid the output channel being registered by reducing the
 	 * number of channels by 1.
 	 */
-	ret = iio_simple_dummy_configure_buffer(indio_dev, iio_dummy_channels, 5);
+	ret = iio_simple_dummy_configure_buffer(indio_dev,
+						iio_dummy_channels, 5);
 	if (ret < 0)
 		goto error_unregister_events;
 
diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h
index c9e8702..b126196 100644
--- a/drivers/staging/iio/iio_simple_dummy.h
+++ b/drivers/staging/iio/iio_simple_dummy.h
@@ -45,19 +45,29 @@
 struct iio_dev;
 
 int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
-				       u64 event_code);
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir);
 
 int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
-					u64 event_code,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir,
 					int state);
 
 int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
-				      u64 event_code,
-				      int *val);
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir,
+				      enum iio_event_info info, int *val,
+				      int *val2);
 
 int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
-				       u64 event_code,
-				       int val);
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       enum iio_event_info info, int val,
+				       int val2);
 
 int iio_simple_dummy_events_register(struct iio_dev *indio_dev);
 int iio_simple_dummy_events_unregister(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c
index 72f400c..46c134b 100644
--- a/drivers/staging/iio/iio_simple_dummy_buffer.c
+++ b/drivers/staging/iio/iio_simple_dummy_buffer.c
@@ -82,11 +82,8 @@
 			len += 2;
 		}
 	}
-	/* Store the timestamp at an 8 byte aligned offset */
-	if (indio_dev->scan_timestamp)
-		*(s64 *)((u8 *)data + ALIGN(len, sizeof(s64)))
-			= iio_get_time_ns();
-	iio_push_to_buffers(indio_dev, (u8 *)data);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data, iio_get_time_ns());
 
 	kfree(data);
 
@@ -102,14 +99,6 @@
 
 static const struct iio_buffer_setup_ops iio_simple_dummy_buffer_setup_ops = {
 	/*
-	 * iio_sw_buffer_preenable:
-	 * Generic function for equal sized ring elements + 64 bit timestamp
-	 * Assumes that any combination of channels can be enabled.
-	 * Typically replaced to implement restrictions on what combinations
-	 * can be captured (hardware scan modes).
-	 */
-	.preenable = &iio_sw_buffer_preenable,
-	/*
 	 * iio_triggered_buffer_postenable:
 	 * Generic function that simply attaches the pollfunc to the trigger.
 	 * Replace this to mess with hardware state before we attach the
@@ -138,7 +127,7 @@
 		goto error_ret;
 	}
 
-	indio_dev->buffer = buffer;
+	iio_device_attach_buffer(indio_dev, buffer);
 
 	/* Enable timestamps by default */
 	buffer->scan_timestamp = true;
diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
index 317b774..812ebd0 100644
--- a/drivers/staging/iio/iio_simple_dummy_events.c
+++ b/drivers/staging/iio/iio_simple_dummy_events.c
@@ -23,13 +23,17 @@
 /**
  * iio_simple_dummy_read_event_config() - is event enabled?
  * @indio_dev: the device instance data
- * @event_code: event code of the event being queried
+ * @chan: channel for the event whose state is being queried
+ * @type: type of the event whose state is being queried
+ * @dir: direction of the vent whose state is being queried
  *
  * This function would normally query the relevant registers or a cache to
  * discover if the event generation is enabled on the device.
  */
 int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
-				       u64 event_code)
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir)
 {
 	struct iio_dummy_state *st = iio_priv(indio_dev);
 
@@ -39,7 +43,9 @@
 /**
  * iio_simple_dummy_write_event_config() - set whether event is enabled
  * @indio_dev: the device instance data
- * @event_code: event code of event being enabled/disabled
+ * @chan: channel for the event whose state is being set
+ * @type: type of the event whose state is being set
+ * @dir: direction of the vent whose state is being set
  * @state: whether to enable or disable the device.
  *
  * This function would normally set the relevant registers on the devices
@@ -47,7 +53,9 @@
  * value.
  */
 int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
-					u64 event_code,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir,
 					int state)
 {
 	struct iio_dummy_state *st = iio_priv(indio_dev);
@@ -56,12 +64,11 @@
 	 *  Deliberately over the top code splitting to illustrate
 	 * how this is done when multiple events exist.
 	 */
-	switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+	switch (chan->type) {
 	case IIO_VOLTAGE:
-		switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+		switch (type) {
 		case IIO_EV_TYPE_THRESH:
-			if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
-			    IIO_EV_DIR_RISING)
+			if (dir == IIO_EV_DIR_RISING)
 				st->event_en = state;
 			else
 				return -EINVAL;
@@ -79,7 +86,10 @@
 /**
  * iio_simple_dummy_read_event_value() - get value associated with event
  * @indio_dev: device instance specific data
- * @event_code: event code for the event whose value is being queried
+ * @chan: channel for the event whose value is being read
+ * @type: type of the event whose value is being read
+ * @dir: direction of the vent whose value is being read
+ * @info: info type of the event whose value is being read
  * @val: value for the event code.
  *
  * Many devices provide a large set of events of which only a subset may
@@ -89,25 +99,34 @@
  * the enabled event is changed.
  */
 int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
-				      u64 event_code,
-				      int *val)
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir,
+					  enum iio_event_info info,
+				      int *val, int *val2)
 {
 	struct iio_dummy_state *st = iio_priv(indio_dev);
 
 	*val = st->event_val;
 
-	return 0;
+	return IIO_VAL_INT;
 }
 
 /**
  * iio_simple_dummy_write_event_value() - set value associate with event
  * @indio_dev: device instance specific data
- * @event_code: event code for the event whose value is being set
+ * @chan: channel for the event whose value is being set
+ * @type: type of the event whose value is being set
+ * @dir: direction of the vent whose value is being set
+ * @info: info type of the event whose value is being set
  * @val: the value to be set.
  */
 int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
-				       u64 event_code,
-				       int val)
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+					   enum iio_event_info info,
+				       int val, int val2)
 {
 	struct iio_dummy_state *st = iio_priv(indio_dev);
 
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index 6330af6..0a4298b 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -323,10 +323,10 @@
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5933_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	long val;
+	unsigned long val;
 	int ret;
 
-	ret = strict_strtoul(buf, 10, &val);
+	ret = kstrtoul(buf, 10, &val);
 	if (ret)
 		return ret;
 
@@ -400,12 +400,12 @@
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5933_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	long val;
+	u16 val;
 	int i, ret = 0;
 	unsigned short dat;
 
 	if (this_attr->address != AD5933_IN_PGA_GAIN) {
-		ret = strict_strtol(buf, 10, &val);
+		ret = kstrtou16(buf, 10, &val);
 		if (ret)
 			return ret;
 	}
@@ -434,7 +434,7 @@
 		ret = ad5933_cmd(st, 0);
 		break;
 	case AD5933_OUT_SETTLING_CYCLES:
-		val = clamp(val, 0L, 0x7FFL);
+		val = clamp(val, (u16)0, (u16)0x7FF);
 		st->settling_cycles = val;
 
 		/* 2x, 4x handling, see datasheet */
@@ -448,7 +448,7 @@
 				AD5933_REG_SETTLING_CYCLES, 2, (u8 *)&dat);
 		break;
 	case AD5933_FREQ_POINTS:
-		val = clamp(val, 0L, 511L);
+		val = clamp(val, (u16)0, (u16)511);
 		st->freq_points = val;
 
 		dat = cpu_to_be16(val);
@@ -574,10 +574,6 @@
 	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
-	ret = iio_sw_buffer_preenable(indio_dev);
-	if (ret < 0)
-		return ret;
-
 	ret = ad5933_reset(st);
 	if (ret < 0)
 		return ret;
@@ -630,10 +626,14 @@
 
 static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
-	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
-	if (!indio_dev->buffer)
+	struct iio_buffer *buffer;
+
+	buffer = iio_kfifo_allocate(indio_dev);
+	if (buffer)
 		return -ENOMEM;
 
+	iio_device_attach_buffer(indio_dev, buffer);
+
 	/* Ring buffer functions - here trigger setup related */
 	indio_dev->setup_ops = &ad5933_ring_setup_ops;
 
@@ -676,7 +676,7 @@
 		} else {
 			buf[0] = be16_to_cpu(buf[0]);
 		}
-		iio_push_to_buffers(indio_dev, (u8 *)buf);
+		iio_push_to_buffers(indio_dev, buf);
 	} else {
 		/* no data available - try again later */
 		schedule_delayed_work(&st->work, st->poll_time_jiffies);
@@ -703,7 +703,9 @@
 	int ret, voltage_uv = 0;
 	struct ad5933_platform_data *pdata = client->dev.platform_data;
 	struct ad5933_state *st;
-	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -716,11 +718,11 @@
 	else
 		st->pdata = pdata;
 
-	st->reg = regulator_get(&client->dev, "vcc");
+	st->reg = devm_regulator_get(&client->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 		voltage_uv = regulator_get_voltage(st->reg);
 	}
 
@@ -778,11 +780,6 @@
 error_disable_reg:
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-error_put_reg:
-	if (!IS_ERR(st->reg))
-		regulator_put(st->reg);
-
-	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -795,11 +792,8 @@
 	iio_device_unregister(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	iio_kfifo_free(indio_dev->buffer);
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index e4998e4..488e690 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -240,7 +240,7 @@
 	unsigned long lval;
 	unsigned int new_range;
 
-	if (strict_strtoul(buf, 10, &lval))
+	if (kstrtoul(buf, 10, &lval))
 		return -EINVAL;
 
 	if (!(lval == 1000UL || lval == 4000UL ||
@@ -279,18 +279,18 @@
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
 	int status;
-	unsigned long lval;
+	unsigned int val;
 	unsigned int new_adc_bit;
 
-	if (strict_strtoul(buf, 10, &lval))
+	if (kstrtouint(buf, 10, &val))
 		return -EINVAL;
-	if (!(lval == 4 || lval == 8 || lval == 12 || lval == 16)) {
+	if (!(val == 4 || val == 8 || val == 12 || val == 16)) {
 		dev_err(dev, "The resolution is not supported\n");
 		return -EINVAL;
 	}
 
 	mutex_lock(&chip->lock);
-	status = isl29018_set_resolution(chip, lval, &new_adc_bit);
+	status = isl29018_set_resolution(chip, val, &new_adc_bit);
 	if (status < 0) {
 		mutex_unlock(&chip->lock);
 		dev_err(dev, "Error in setting resolution\n");
@@ -319,11 +319,11 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	unsigned long lval;
+	int val;
 
-	if (strict_strtoul(buf, 10, &lval))
+	if (kstrtoint(buf, 10, &val))
 		return -EINVAL;
-	if (!(lval == 0UL || lval == 1UL)) {
+	if (!(val == 0 || val == 1)) {
 		dev_err(dev, "The mode is not supported\n");
 		return -EINVAL;
 	}
@@ -331,7 +331,7 @@
 	/* get the  "proximity scheme" i.e. if the chip does on chip
 	infrared suppression (1 means perform on chip suppression) */
 	mutex_lock(&chip->lock);
-	chip->prox_scheme = (int)lval;
+	chip->prox_scheme = val;
 	mutex_unlock(&chip->lock);
 
 	return count;
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index b377dd3..f8c6595 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -493,9 +493,9 @@
 	struct device_attribute *attr, const char *buf, size_t len)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	unsigned long value;
+	int value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoint(buf, 0, &value))
 		return -EINVAL;
 
 	if (value == 0)
@@ -536,9 +536,9 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	unsigned long value;
+	int value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoint(buf, 0, &value))
 		return -EINVAL;
 
 	switch (value) {
@@ -582,9 +582,9 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	unsigned long value;
+	int value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoint(buf, 0, &value))
 		return -EINVAL;
 
 	if ((value < 50) || (value > 650))
@@ -619,9 +619,9 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	unsigned long value;
+	int value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoint(buf, 0, &value))
 		return -EINVAL;
 
 	if (value)
@@ -644,9 +644,9 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	unsigned long value;
+	int value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoint(buf, 0, &value))
 		return -EINVAL;
 
 	if (value)
@@ -671,9 +671,9 @@
 	struct device_attribute *attr, const char *buf, size_t len)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	unsigned long value;
+	int value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoint(buf, 0, &value))
 		return -EINVAL;
 
 	if (value == 1)
@@ -815,12 +815,9 @@
 		return -EOPNOTSUPP;
 	}
 
-	indio_dev = iio_device_alloc(sizeof(*chip));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		dev_err(&clientp->dev, "iio allocation failed\n");
-		goto fail1;
-	}
+	indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
 	chip = iio_priv(indio_dev);
 	chip->client = clientp;
 	i2c_set_clientdata(clientp, indio_dev);
@@ -835,14 +832,14 @@
 		if (ret < 0) {
 			dev_err(&clientp->dev, "i2c_smbus_write_bytes() to cmd "
 				"reg failed in taos_probe(), err = %d\n", ret);
-			goto fail2;
+			return ret;
 		}
 		ret = i2c_smbus_read_byte(clientp);
 		if (ret < 0) {
 			dev_err(&clientp->dev, "i2c_smbus_read_byte from "
 				"reg failed in taos_probe(), err = %d\n", ret);
 
-			goto fail2;
+			return ret;
 		}
 		buf[i] = ret;
 	}
@@ -850,14 +847,14 @@
 	if (!taos_tsl258x_device(buf)) {
 		dev_info(&clientp->dev, "i2c device found but does not match "
 			"expected id in taos_probe()\n");
-		goto fail2;
+		return -EINVAL;
 	}
 
 	ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL));
 	if (ret < 0) {
 		dev_err(&clientp->dev, "i2c_smbus_write_byte() to cmd reg "
 			"failed in taos_probe(), err = %d\n", ret);
-		goto fail2;
+		return ret;
 	}
 
 	indio_dev->info = &tsl2583_info;
@@ -867,7 +864,7 @@
 	ret = iio_device_register(indio_dev);
 	if (ret) {
 		dev_err(&clientp->dev, "iio registration failed\n");
-		goto fail2;
+		return ret;
 	}
 
 	/* Load up the V2 defaults (these are hard coded defaults for now) */
@@ -878,10 +875,6 @@
 
 	dev_info(&clientp->dev, "Light sensor found.\n");
 	return 0;
-fail1:
-	iio_device_free(indio_dev);
-fail2:
-	return ret;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -926,7 +919,6 @@
 static int taos_remove(struct i2c_client *client)
 {
 	iio_device_unregister(i2c_get_clientdata(client));
-	iio_device_free(i2c_get_clientdata(client));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c
index c99f890..1880502 100644
--- a/drivers/staging/iio/light/tsl2x7x_core.c
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -124,11 +124,6 @@
 #define TSL2X7X_mA13                   0xD0
 #define TSL2X7X_MAX_TIMER_CNT          (0xFF)
 
-/*Common device IIO EventMask */
-#define TSL2X7X_EVENT_MASK \
-		(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
-		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)),
-
 #define TSL2X7X_MIN_ITIME 3
 
 /* TAOS txx2x7x Device family members */
@@ -550,7 +545,7 @@
 static void tsl2x7x_defaults(struct tsl2X7X_chip *chip)
 {
 	/* If Operational settings defined elsewhere.. */
-	if (chip->pdata && chip->pdata->platform_default_settings != 0)
+	if (chip->pdata && chip->pdata->platform_default_settings)
 		memcpy(&(chip->tsl2x7x_settings),
 			chip->pdata->platform_default_settings,
 			sizeof(tsl2x7x_default_settings));
@@ -951,7 +946,6 @@
 	case tsl2771:
 	case tmd2771:
 		return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 128");
-	break;
 	}
 
 	return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 120");
@@ -1223,12 +1217,14 @@
 }
 
 static int tsl2x7x_read_interrupt_config(struct iio_dev *indio_dev,
-					 u64 event_code)
+					 const struct iio_chan_spec *chan,
+					 enum iio_event_type type,
+					 enum iio_event_direction dir)
 {
 	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
 	int ret;
 
-	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY)
+	if (chan->type == IIO_INTENSITY)
 		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x10);
 	else
 		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x20);
@@ -1237,12 +1233,14 @@
 }
 
 static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev,
-					  u64 event_code,
+					  const struct iio_chan_spec *chan,
+					  enum iio_event_type type,
+					  enum iio_event_direction dir,
 					  int val)
 {
 	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
 
-	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+	if (chan->type == IIO_INTENSITY) {
 		if (val)
 			chip->tsl2x7x_settings.interrupts_en |= 0x10;
 		else
@@ -1260,13 +1258,16 @@
 }
 
 static int tsl2x7x_write_thresh(struct iio_dev *indio_dev,
-				  u64 event_code,
-				  int val)
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
 {
 	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
 
-	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
-		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+	if (chan->type == IIO_INTENSITY) {
+		switch (dir) {
 		case IIO_EV_DIR_RISING:
 			chip->tsl2x7x_settings.als_thresh_high = val;
 			break;
@@ -1277,7 +1278,7 @@
 			return -EINVAL;
 		}
 	} else {
-		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		switch (dir) {
 		case IIO_EV_DIR_RISING:
 			chip->tsl2x7x_settings.prox_thres_high = val;
 			break;
@@ -1295,13 +1296,16 @@
 }
 
 static int tsl2x7x_read_thresh(struct iio_dev *indio_dev,
-			       u64 event_code,
-			       int *val)
+			       const struct iio_chan_spec *chan,
+			       enum iio_event_type type,
+			       enum iio_event_direction dir,
+				   enum iio_event_info info,
+			       int *val, int *val2)
 {
 	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
 
-	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
-		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+	if (chan->type == IIO_INTENSITY) {
+		switch (dir) {
 		case IIO_EV_DIR_RISING:
 			*val = chip->tsl2x7x_settings.als_thresh_high;
 			break;
@@ -1312,7 +1316,7 @@
 			return -EINVAL;
 		}
 	} else {
-		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		switch (dir) {
 		case IIO_EV_DIR_RISING:
 			*val = chip->tsl2x7x_settings.prox_thres_high;
 			break;
@@ -1324,7 +1328,7 @@
 		}
 	}
 
-	return 0;
+	return IIO_VAL_INT;
 }
 
 static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
@@ -1346,7 +1350,6 @@
 			break;
 		default:
 			return -EINVAL;
-			break;
 		}
 		break;
 	case IIO_CHAN_INFO_RAW:
@@ -1366,7 +1369,6 @@
 			break;
 		default:
 			return -EINVAL;
-			break;
 		}
 		break;
 	case IIO_CHAN_INFO_CALIBSCALE:
@@ -1419,7 +1421,6 @@
 				case tsl2772:
 				case tmd2772:
 					return -EINVAL;
-				break;
 				}
 				chip->tsl2x7x_settings.als_gain = 3;
 				break;
@@ -1431,7 +1432,6 @@
 				case tsl2771:
 				case tmd2771:
 					return -EINVAL;
-				break;
 				}
 				chip->tsl2x7x_settings.als_gain = 3;
 				break;
@@ -1508,18 +1508,15 @@
 	case tsl2671:
 	case tsl2771:
 		return ((*id & 0xf0) == TRITON_ID);
-	break;
 	case tmd2671:
 	case tmd2771:
 		return ((*id & 0xf0) == HALIBUT_ID);
-	break;
 	case tsl2572:
 	case tsl2672:
 	case tmd2672:
 	case tsl2772:
 	case tmd2772:
 		return ((*id & 0xf0) == SWORDFISH_ID);
-	break;
 	}
 
 	return -EINVAL;
@@ -1675,10 +1672,10 @@
 		.driver_module = THIS_MODULE,
 		.read_raw = &tsl2x7x_read_raw,
 		.write_raw = &tsl2x7x_write_raw,
-		.read_event_value = &tsl2x7x_read_thresh,
-		.write_event_value = &tsl2x7x_write_thresh,
-		.read_event_config = &tsl2x7x_read_interrupt_config,
-		.write_event_config = &tsl2x7x_write_interrupt_config,
+		.read_event_value_new = &tsl2x7x_read_thresh,
+		.write_event_value_new = &tsl2x7x_write_thresh,
+		.read_event_config_new = &tsl2x7x_read_interrupt_config,
+		.write_event_config_new = &tsl2x7x_write_interrupt_config,
 	},
 	[PRX] = {
 		.attrs = &tsl2X7X_device_attr_group_tbl[PRX],
@@ -1686,10 +1683,10 @@
 		.driver_module = THIS_MODULE,
 		.read_raw = &tsl2x7x_read_raw,
 		.write_raw = &tsl2x7x_write_raw,
-		.read_event_value = &tsl2x7x_read_thresh,
-		.write_event_value = &tsl2x7x_write_thresh,
-		.read_event_config = &tsl2x7x_read_interrupt_config,
-		.write_event_config = &tsl2x7x_write_interrupt_config,
+		.read_event_value_new = &tsl2x7x_read_thresh,
+		.write_event_value_new = &tsl2x7x_write_thresh,
+		.read_event_config_new = &tsl2x7x_read_interrupt_config,
+		.write_event_config_new = &tsl2x7x_write_interrupt_config,
 	},
 	[ALSPRX] = {
 		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX],
@@ -1697,10 +1694,10 @@
 		.driver_module = THIS_MODULE,
 		.read_raw = &tsl2x7x_read_raw,
 		.write_raw = &tsl2x7x_write_raw,
-		.read_event_value = &tsl2x7x_read_thresh,
-		.write_event_value = &tsl2x7x_write_thresh,
-		.read_event_config = &tsl2x7x_read_interrupt_config,
-		.write_event_config = &tsl2x7x_write_interrupt_config,
+		.read_event_value_new = &tsl2x7x_read_thresh,
+		.write_event_value_new = &tsl2x7x_write_thresh,
+		.read_event_config_new = &tsl2x7x_read_interrupt_config,
+		.write_event_config_new = &tsl2x7x_write_interrupt_config,
 	},
 	[PRX2] = {
 		.attrs = &tsl2X7X_device_attr_group_tbl[PRX2],
@@ -1708,10 +1705,10 @@
 		.driver_module = THIS_MODULE,
 		.read_raw = &tsl2x7x_read_raw,
 		.write_raw = &tsl2x7x_write_raw,
-		.read_event_value = &tsl2x7x_read_thresh,
-		.write_event_value = &tsl2x7x_write_thresh,
-		.read_event_config = &tsl2x7x_read_interrupt_config,
-		.write_event_config = &tsl2x7x_write_interrupt_config,
+		.read_event_value_new = &tsl2x7x_read_thresh,
+		.write_event_value_new = &tsl2x7x_write_thresh,
+		.read_event_config_new = &tsl2x7x_read_interrupt_config,
+		.write_event_config_new = &tsl2x7x_write_interrupt_config,
 	},
 	[ALSPRX2] = {
 		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX2],
@@ -1719,10 +1716,24 @@
 		.driver_module = THIS_MODULE,
 		.read_raw = &tsl2x7x_read_raw,
 		.write_raw = &tsl2x7x_write_raw,
-		.read_event_value = &tsl2x7x_read_thresh,
-		.write_event_value = &tsl2x7x_write_thresh,
-		.read_event_config = &tsl2x7x_read_interrupt_config,
-		.write_event_config = &tsl2x7x_write_interrupt_config,
+		.read_event_value_new = &tsl2x7x_read_thresh,
+		.write_event_value_new = &tsl2x7x_write_thresh,
+		.read_event_config_new = &tsl2x7x_read_interrupt_config,
+		.write_event_config_new = &tsl2x7x_write_interrupt_config,
+	},
+};
+
+static const struct iio_event_spec tsl2x7x_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
 	},
 };
 
@@ -1741,7 +1752,8 @@
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 				BIT(IIO_CHAN_INFO_CALIBBIAS),
-			.event_mask = TSL2X7X_EVENT_MASK
+			.event_spec = tsl2x7x_events,
+			.num_event_specs = ARRAY_SIZE(tsl2x7x_events),
 			}, {
 			.type = IIO_INTENSITY,
 			.indexed = 1,
@@ -1758,7 +1770,8 @@
 			.indexed = 1,
 			.channel = 0,
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-			.event_mask = TSL2X7X_EVENT_MASK
+			.event_spec = tsl2x7x_events,
+			.num_event_specs = ARRAY_SIZE(tsl2x7x_events),
 			},
 		},
 	.chan_table_elements = 1,
@@ -1778,7 +1791,8 @@
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 				BIT(IIO_CHAN_INFO_CALIBBIAS),
-			.event_mask = TSL2X7X_EVENT_MASK
+			.event_spec = tsl2x7x_events,
+			.num_event_specs = ARRAY_SIZE(tsl2x7x_events),
 			}, {
 			.type = IIO_INTENSITY,
 			.indexed = 1,
@@ -1789,7 +1803,8 @@
 			.indexed = 1,
 			.channel = 0,
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-			.event_mask = TSL2X7X_EVENT_MASK
+			.event_spec = tsl2x7x_events,
+			.num_event_specs = ARRAY_SIZE(tsl2x7x_events),
 			},
 		},
 	.chan_table_elements = 4,
@@ -1803,7 +1818,8 @@
 			.channel = 0,
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				BIT(IIO_CHAN_INFO_CALIBSCALE),
-			.event_mask = TSL2X7X_EVENT_MASK
+			.event_spec = tsl2x7x_events,
+			.num_event_specs = ARRAY_SIZE(tsl2x7x_events),
 			},
 		},
 	.chan_table_elements = 1,
@@ -1823,7 +1839,8 @@
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 				BIT(IIO_CHAN_INFO_CALIBBIAS),
-			.event_mask = TSL2X7X_EVENT_MASK
+			.event_spec = tsl2x7x_events,
+			.num_event_specs = ARRAY_SIZE(tsl2x7x_events),
 			}, {
 			.type = IIO_INTENSITY,
 			.indexed = 1,
@@ -1835,7 +1852,8 @@
 			.channel = 0,
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				BIT(IIO_CHAN_INFO_CALIBSCALE),
-			.event_mask = TSL2X7X_EVENT_MASK
+			.event_spec = tsl2x7x_events,
+			.num_event_specs = ARRAY_SIZE(tsl2x7x_events),
 			},
 		},
 	.chan_table_elements = 4,
@@ -1851,7 +1869,7 @@
 	struct iio_dev *indio_dev;
 	struct tsl2X7X_chip *chip;
 
-	indio_dev = iio_device_alloc(sizeof(*chip));
+	indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -1862,22 +1880,21 @@
 	ret = tsl2x7x_i2c_read(chip->client,
 		TSL2X7X_CHIPID, &device_id);
 	if (ret < 0)
-		goto fail1;
+		return ret;
 
 	if ((!tsl2x7x_device_id(&device_id, id->driver_data)) ||
 		(tsl2x7x_device_id(&device_id, id->driver_data) == -EINVAL)) {
 		dev_info(&chip->client->dev,
 				"%s: i2c device found does not match expected id\n",
 				__func__);
-		ret = -EINVAL;
-		goto fail1;
+		return -EINVAL;
 	}
 
 	ret = i2c_smbus_write_byte(clientp, (TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
 	if (ret < 0) {
 		dev_err(&clientp->dev, "%s: write to cmd reg failed. err = %d\n",
 				__func__, ret);
-		goto fail1;
+		return ret;
 	}
 
 	/* ALS and PROX functions can be invoked via user space poll
@@ -1899,16 +1916,17 @@
 	indio_dev->num_channels = chip->chip_info->chan_table_elements;
 
 	if (clientp->irq) {
-		ret = request_threaded_irq(clientp->irq,
-					   NULL,
-					   &tsl2x7x_event_handler,
-					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-					   "TSL2X7X_event",
-					   indio_dev);
+		ret = devm_request_threaded_irq(&clientp->dev, clientp->irq,
+						NULL,
+						&tsl2x7x_event_handler,
+						IRQF_TRIGGER_RISING |
+						IRQF_ONESHOT,
+						"TSL2X7X_event",
+						indio_dev);
 		if (ret) {
 			dev_err(&clientp->dev,
 				"%s: irq request failed", __func__);
-			goto fail1;
+			return ret;
 		}
 	}
 
@@ -1921,20 +1939,12 @@
 	if (ret) {
 		dev_err(&clientp->dev,
 			"%s: iio registration failed\n", __func__);
-		goto fail2;
+		return ret;
 	}
 
 	dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
 
 	return 0;
-
-fail2:
-	if (clientp->irq)
-		free_irq(clientp->irq, indio_dev);
-fail1:
-	iio_device_free(indio_dev);
-
-	return ret;
 }
 
 static int tsl2x7x_suspend(struct device *dev)
@@ -1980,10 +1990,6 @@
 	tsl2x7x_chip_off(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
index c3f3f53..99421f9 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.c
+++ b/drivers/staging/iio/magnetometer/hmc5843.c
@@ -23,23 +23,17 @@
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
 #include <linux/delay.h>
 
 #define HMC5843_CONFIG_REG_A			0x00
 #define HMC5843_CONFIG_REG_B			0x01
 #define HMC5843_MODE_REG			0x02
-#define HMC5843_DATA_OUT_X_MSB_REG		0x03
-#define HMC5843_DATA_OUT_X_LSB_REG		0x04
-#define HMC5843_DATA_OUT_Y_MSB_REG		0x05
-#define HMC5843_DATA_OUT_Y_LSB_REG		0x06
-#define HMC5843_DATA_OUT_Z_MSB_REG		0x07
-#define HMC5843_DATA_OUT_Z_LSB_REG		0x08
-/* Beware: Y and Z are exchanged on HMC5883 */
-#define HMC5883_DATA_OUT_Z_MSB_REG		0x05
-#define HMC5883_DATA_OUT_Z_LSB_REG		0x06
-#define HMC5883_DATA_OUT_Y_MSB_REG		0x07
-#define HMC5883_DATA_OUT_Y_LSB_REG		0x08
+#define HMC5843_DATA_OUT_MSB_REGS		0x03
 #define HMC5843_STATUS_REG			0x09
+#define HMC5843_ID_REG				0x0a
 
 enum hmc5843_ids {
 	HMC5843_ID,
@@ -54,19 +48,13 @@
  */
 #define HMC5843_RANGE_GAIN_OFFSET		0x05
 #define HMC5843_RANGE_GAIN_DEFAULT		0x01
-#define HMC5843_RANGE_GAIN_MAX			0x07
+#define HMC5843_RANGE_GAINS			8
 
-/*
- * Device status
- */
+/* Device status */
 #define HMC5843_DATA_READY			0x01
 #define HMC5843_DATA_OUTPUT_LOCK		0x02
-/* Does not exist on HMC5883, not used */
-#define HMC5843_VOLTAGE_REGULATOR_ENABLED	0x04
 
-/*
- * Mode register configuration
- */
+/* Mode register configuration */
 #define HMC5843_MODE_CONVERSION_CONTINUOUS	0x00
 #define HMC5843_MODE_CONVERSION_SINGLE		0x01
 #define HMC5843_MODE_IDLE			0x02
@@ -78,80 +66,29 @@
  * HMC5883: Typical data output rate
  */
 #define HMC5843_RATE_OFFSET			0x02
-#define HMC5843_RATE_BITMASK			0x1C
-#define HMC5843_RATE_NOT_USED			0x07
+#define HMC5843_RATE_DEFAULT			0x04
+#define HMC5843_RATES				7
 
-/*
- * Device measurement configuration
- */
+/* Device measurement configuration */
 #define HMC5843_MEAS_CONF_NORMAL		0x00
 #define HMC5843_MEAS_CONF_POSITIVE_BIAS		0x01
 #define HMC5843_MEAS_CONF_NEGATIVE_BIAS		0x02
-#define HMC5843_MEAS_CONF_NOT_USED		0x03
 #define HMC5843_MEAS_CONF_MASK			0x03
 
-/*
- * Scaling factors: 10000000/Gain
- */
-static const int hmc5843_regval_to_nanoscale[] = {
+/* Scaling factors: 10000000/Gain */
+static const int hmc5843_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
 	6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
 };
 
-static const int hmc5883_regval_to_nanoscale[] = {
+static const int hmc5883_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
 	7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662
 };
 
-static const int hmc5883l_regval_to_nanoscale[] = {
+static const int hmc5883l_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
 	7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478
 };
 
 /*
- * From the HMC5843 datasheet:
- * Value	| Sensor input field range (Ga)	| Gain (counts/milli-Gauss)
- * 0		| (+-)0.7			| 1620
- * 1		| (+-)1.0			| 1300
- * 2		| (+-)1.5			| 970
- * 3		| (+-)2.0			| 780
- * 4		| (+-)3.2			| 530
- * 5		| (+-)3.8			| 460
- * 6		| (+-)4.5			| 390
- * 7		| (+-)6.5			| 280
- *
- * From the HMC5883 datasheet:
- * Value	| Recommended sensor field range (Ga)	| Gain (counts/Gauss)
- * 0		| (+-)0.9				| 1280
- * 1		| (+-)1.2				| 1024
- * 2		| (+-)1.9				| 768
- * 3		| (+-)2.5				| 614
- * 4		| (+-)4.0				| 415
- * 5		| (+-)4.6				| 361
- * 6		| (+-)5.5				| 307
- * 7		| (+-)7.9				| 219
- *
- * From the HMC5883L datasheet:
- * Value	| Recommended sensor field range (Ga)	| Gain (LSB/Gauss)
- * 0		| (+-)0.88				| 1370
- * 1		| (+-)1.3				| 1090
- * 2		| (+-)1.9				| 820
- * 3		| (+-)2.5				| 660
- * 4		| (+-)4.0				| 440
- * 5		| (+-)4.7				| 390
- * 6		| (+-)5.6				| 330
- * 7		| (+-)8.1				| 230
- */
-static const int hmc5843_regval_to_input_field_mga[] = {
-	700, 1000, 1500, 2000, 3200, 3800, 4500, 6500
-};
-
-static const int hmc5883_regval_to_input_field_mga[] = {
-	900, 1200, 1900, 2500, 4000, 4600, 5500, 7900
-};
-
-static const int hmc5883l_regval_to_input_field_mga[] = {
-	880, 1300, 1900, 2500, 4000, 4700, 5600, 8100
-};
-
-/*
  * From the datasheet:
  * Value	| HMC5843		| HMC5883/HMC5883L
  *		| Data output rate (Hz)	| Data output rate (Hz)
@@ -164,143 +101,96 @@
  * 6		| 50			| 75
  * 7		| Not used		| Not used
  */
-static const char * const hmc5843_regval_to_sample_freq[] = {
-	"0.5", "1", "2", "5", "10", "20", "50",
+static const int hmc5843_regval_to_samp_freq[7][2] = {
+	{0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0}
 };
 
-static const char * const hmc5883_regval_to_sample_freq[] = {
-	"0.75", "1.5", "3", "7.5", "15", "30", "75",
+static const int hmc5883_regval_to_samp_freq[7][2] = {
+	{0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
+	{75, 0}
 };
 
 /* Describe chip variants */
 struct hmc5843_chip_info {
 	const struct iio_chan_spec *channels;
-	const char * const *regval_to_sample_freq;
-	const int *regval_to_input_field_mga;
+	const int (*regval_to_samp_freq)[2];
 	const int *regval_to_nanoscale;
 };
 
 /* Each client has this additional data */
 struct hmc5843_data {
+	struct i2c_client *client;
 	struct mutex lock;
 	u8 rate;
 	u8 meas_conf;
 	u8 operating_mode;
 	u8 range;
 	const struct hmc5843_chip_info *variant;
+	__be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
 };
 
 /* The lower two bits contain the current conversion mode */
-static s32 hmc5843_configure(struct i2c_client *client,
-				       u8 operating_mode)
+static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode)
 {
-	return i2c_smbus_write_byte_data(client,
-					HMC5843_MODE_REG,
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = i2c_smbus_write_byte_data(data->client, HMC5843_MODE_REG,
 					operating_mode & HMC5843_MODE_MASK);
+	if (ret >= 0)
+		data->operating_mode = operating_mode;
+	mutex_unlock(&data->lock);
+
+	return ret;
 }
 
-/* Return the measurement value from the specified channel */
-static int hmc5843_read_measurement(struct iio_dev *indio_dev,
-				    int address,
-				    int *val)
+static int hmc5843_wait_measurement(struct hmc5843_data *data)
 {
-	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
-	struct hmc5843_data *data = iio_priv(indio_dev);
 	s32 result;
 	int tries = 150;
 
-	mutex_lock(&data->lock);
 	while (tries-- > 0) {
-		result = i2c_smbus_read_byte_data(client,
+		result = i2c_smbus_read_byte_data(data->client,
 			HMC5843_STATUS_REG);
+		if (result < 0)
+			return result;
 		if (result & HMC5843_DATA_READY)
 			break;
 		msleep(20);
 	}
 
 	if (tries < 0) {
-		dev_err(&client->dev, "data not ready\n");
-		mutex_unlock(&data->lock);
+		dev_err(&data->client->dev, "data not ready\n");
 		return -EIO;
 	}
 
-	result = i2c_smbus_read_word_swapped(client, address);
+	return 0;
+}
+
+/* Return the measurement value from the specified channel */
+static int hmc5843_read_measurement(struct hmc5843_data *data,
+				    int idx, int *val)
+{
+	s32 result;
+	__be16 values[3];
+
+	mutex_lock(&data->lock);
+	result = hmc5843_wait_measurement(data);
+	if (result < 0) {
+		mutex_unlock(&data->lock);
+		return result;
+	}
+	result = i2c_smbus_read_i2c_block_data(data->client,
+		HMC5843_DATA_OUT_MSB_REGS, sizeof(values), (u8 *) values);
 	mutex_unlock(&data->lock);
 	if (result < 0)
 		return -EINVAL;
 
-	*val = sign_extend32(result, 15);
+	*val = sign_extend32(be16_to_cpu(values[idx]), 15);
 	return IIO_VAL_INT;
 }
 
 /*
- * From the datasheet:
- * 0 - Continuous-Conversion Mode: In continuous-conversion mode, the
- *     device continuously performs conversions and places the result in
- *     the data register.
- *
- * 1 - Single-Conversion Mode : Device performs a single measurement,
- *     sets RDY high and returns to sleep mode.
- *
- * 2 - Idle Mode : Device is placed in idle mode.
- *
- * 3 - Sleep Mode : Device is placed in sleep mode.
- *
- */
-static ssize_t hmc5843_show_operating_mode(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	return sprintf(buf, "%d\n", data->operating_mode);
-}
-
-static ssize_t hmc5843_set_operating_mode(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf,
-				size_t count)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	unsigned long operating_mode = 0;
-	s32 status;
-	int error;
-
-	mutex_lock(&data->lock);
-	error = kstrtoul(buf, 10, &operating_mode);
-	if (error) {
-		count = error;
-		goto exit;
-	}
-	dev_dbg(dev, "set conversion mode to %lu\n", operating_mode);
-	if (operating_mode > HMC5843_MODE_SLEEP) {
-		count = -EINVAL;
-		goto exit;
-	}
-
-	status = i2c_smbus_write_byte_data(client, this_attr->address,
-					operating_mode);
-	if (status) {
-		count = -EINVAL;
-		goto exit;
-	}
-	data->operating_mode = operating_mode;
-
-exit:
-	mutex_unlock(&data->lock);
-	return count;
-}
-
-static IIO_DEVICE_ATTR(operating_mode,
-			S_IWUSR | S_IRUGO,
-			hmc5843_show_operating_mode,
-			hmc5843_set_operating_mode,
-			HMC5843_MODE_REG);
-
-/*
  * API for setting the measurement configuration to
  * Normal, Positive bias and Negative bias
  *
@@ -318,23 +208,26 @@
  *     and BN.
  *
  */
-static s32 hmc5843_set_meas_conf(struct i2c_client *client,
-				      u8 meas_conf)
+static s32 hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	u8 reg_val;
-	reg_val = (meas_conf & HMC5843_MEAS_CONF_MASK) |
-		(data->rate << HMC5843_RATE_OFFSET);
-	return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val);
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A,
+		(meas_conf & HMC5843_MEAS_CONF_MASK) |
+		(data->rate << HMC5843_RATE_OFFSET));
+	if (ret >= 0)
+		data->meas_conf = meas_conf;
+	mutex_unlock(&data->lock);
+
+	return ret;
 }
 
 static ssize_t hmc5843_show_measurement_configuration(struct device *dev,
 						struct device_attribute *attr,
 						char *buf)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct hmc5843_data *data = iio_priv(indio_dev);
+	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
 	return sprintf(buf, "%d\n", data->meas_conf);
 }
 
@@ -343,29 +236,19 @@
 						const char *buf,
 						size_t count)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
-	struct hmc5843_data *data = iio_priv(indio_dev);
+	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
 	unsigned long meas_conf = 0;
-	int error;
+	int ret;
 
-	error = kstrtoul(buf, 10, &meas_conf);
-	if (error)
-		return error;
-	if (meas_conf >= HMC5843_MEAS_CONF_NOT_USED)
+	ret = kstrtoul(buf, 10, &meas_conf);
+	if (ret)
+		return ret;
+	if (meas_conf >= HMC5843_MEAS_CONF_MASK)
 		return -EINVAL;
 
-	mutex_lock(&data->lock);
-	dev_dbg(dev, "set measurement configuration to %lu\n", meas_conf);
-	if (hmc5843_set_meas_conf(client, meas_conf)) {
-		count = -EINVAL;
-		goto exit;
-	}
-	data->meas_conf = meas_conf;
+	ret = hmc5843_set_meas_conf(data, meas_conf);
 
-exit:
-	mutex_unlock(&data->lock);
-	return count;
+	return (ret < 0) ? ret : count;
 }
 
 static IIO_DEVICE_ATTR(meas_conf,
@@ -374,211 +257,221 @@
 			hmc5843_set_measurement_configuration,
 			0);
 
-static ssize_t hmc5843_show_sampling_frequencies_available(struct device *dev,
-						struct device_attribute *attr,
-						char *buf)
+static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	ssize_t total_n = 0;
+	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
+	size_t len = 0;
 	int i;
 
-	for (i = 0; i < HMC5843_RATE_NOT_USED; i++) {
-		ssize_t n = sprintf(buf, "%s ", data->variant->regval_to_sample_freq[i]);
-		buf += n;
-		total_n += n;
-	}
+	for (i = 0; i < HMC5843_RATES; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			"%d.%d ", data->variant->regval_to_samp_freq[i][0],
+			data->variant->regval_to_samp_freq[i][1]);
+
 	/* replace trailing space by newline */
-	buf[-1] = '\n';
+	buf[len - 1] = '\n';
 
-	return total_n;
+	return len;
 }
 
-static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_sampling_frequencies_available);
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail);
 
-static s32 hmc5843_set_rate(struct i2c_client *client,
-				u8 rate)
+static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	u8 reg_val;
+	int ret;
 
-	if (rate >= HMC5843_RATE_NOT_USED) {
-		dev_err(&client->dev,
-			"data output rate is not supported\n");
-		return -EINVAL;
-	}
+	mutex_lock(&data->lock);
+	ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A,
+		data->meas_conf | (rate << HMC5843_RATE_OFFSET));
+	if (ret >= 0)
+		data->rate = rate;
+	mutex_unlock(&data->lock);
 
-	reg_val = data->meas_conf | (rate << HMC5843_RATE_OFFSET);
-	return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val);
+	return ret;
 }
 
-static int hmc5843_check_sampling_frequency(struct hmc5843_data *data,
-						const char *buf)
+static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
+				   int val, int val2)
 {
-	const char * const *samp_freq = data->variant->regval_to_sample_freq;
 	int i;
 
-	for (i = 0; i < HMC5843_RATE_NOT_USED; i++) {
-		if (sysfs_streq(buf, samp_freq[i]))
+	for (i = 0; i < HMC5843_RATES; i++)
+		if (val == data->variant->regval_to_samp_freq[i][0] &&
+			val2 == data->variant->regval_to_samp_freq[i][1])
 			return i;
-	}
 
 	return -EINVAL;
 }
 
-static ssize_t hmc5843_set_sampling_frequency(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t count)
+static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range)
 {
-
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	int rate;
-
-	rate = hmc5843_check_sampling_frequency(data, buf);
-	if (rate < 0) {
-		dev_err(&client->dev,
-			"sampling frequency is not supported\n");
-		return rate;
-	}
+	int ret;
 
 	mutex_lock(&data->lock);
-	dev_dbg(dev, "set rate to %d\n", rate);
-	if (hmc5843_set_rate(client, rate)) {
-		count = -EINVAL;
-		goto exit;
-	}
-	data->rate = rate;
-
-exit:
+	ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_B,
+		range << HMC5843_RANGE_GAIN_OFFSET);
+	if (ret >= 0)
+		data->range = range;
 	mutex_unlock(&data->lock);
-	return count;
+
+	return ret;
 }
 
-static ssize_t hmc5843_show_sampling_frequency(struct device *dev,
-			struct device_attribute *attr, char *buf)
+static ssize_t hmc5843_show_scale_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	s32 rate;
+	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
 
-	rate = i2c_smbus_read_byte_data(client, this_attr->address);
-	if (rate < 0)
-		return rate;
-	rate = (rate & HMC5843_RATE_BITMASK) >> HMC5843_RATE_OFFSET;
-	return sprintf(buf, "%s\n", data->variant->regval_to_sample_freq[rate]);
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < HMC5843_RANGE_GAINS; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			"0.%09d ", data->variant->regval_to_nanoscale[i]);
+
+	/* replace trailing space by newline */
+	buf[len - 1] = '\n';
+
+	return len;
 }
 
-static IIO_DEVICE_ATTR(sampling_frequency,
-			S_IWUSR | S_IRUGO,
-			hmc5843_show_sampling_frequency,
-			hmc5843_set_sampling_frequency,
-			HMC5843_CONFIG_REG_A);
+static IIO_DEVICE_ATTR(scale_available, S_IRUGO,
+	hmc5843_show_scale_avail, NULL, 0);
 
-static ssize_t hmc5843_show_range_gain(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
+static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2)
 {
-	u8 range;
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct hmc5843_data *data = iio_priv(indio_dev);
+	int i;
 
-	range = data->range;
-	return sprintf(buf, "%d\n", data->variant->regval_to_input_field_mga[range]);
+	if (val != 0)
+		return -EINVAL;
+
+	for (i = 0; i < HMC5843_RANGE_GAINS; i++)
+		if (val2 == data->variant->regval_to_nanoscale[i])
+			return i;
+
+	return -EINVAL;
 }
 
-static ssize_t hmc5843_set_range_gain(struct device *dev,
-			struct device_attribute *attr,
-			const char *buf,
-			size_t count)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct hmc5843_data *data = iio_priv(indio_dev);
-	unsigned long range = 0;
-	int error;
-
-	mutex_lock(&data->lock);
-	error = kstrtoul(buf, 10, &range);
-	if (error) {
-		count = error;
-		goto exit;
-	}
-	dev_dbg(dev, "set range to %lu\n", range);
-
-	if (range > HMC5843_RANGE_GAIN_MAX) {
-		count = -EINVAL;
-		goto exit;
-	}
-
-	data->range = range;
-	range = range << HMC5843_RANGE_GAIN_OFFSET;
-	if (i2c_smbus_write_byte_data(client, this_attr->address, range))
-		count = -EINVAL;
-
-exit:
-	mutex_unlock(&data->lock);
-	return count;
-}
-
-static IIO_DEVICE_ATTR(in_magn_range,
-			S_IWUSR | S_IRUGO,
-			hmc5843_show_range_gain,
-			hmc5843_set_range_gain,
-			HMC5843_CONFIG_REG_B);
-
 static int hmc5843_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
-			    int *val, int *val2,
-			    long mask)
+			    int *val, int *val2, long mask)
 {
 	struct hmc5843_data *data = iio_priv(indio_dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		return hmc5843_read_measurement(indio_dev,
-						chan->address,
-						val);
+		return hmc5843_read_measurement(data, chan->scan_index, val);
 	case IIO_CHAN_INFO_SCALE:
 		*val = 0;
 		*val2 = data->variant->regval_to_nanoscale[data->range];
 		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = data->variant->regval_to_samp_freq[data->rate][0];
+		*val2 = data->variant->regval_to_samp_freq[data->rate][1];
+		return IIO_VAL_INT_PLUS_MICRO;
 	}
 	return -EINVAL;
 }
 
-#define HMC5843_CHANNEL(axis, addr)					\
+static int hmc5843_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct hmc5843_data *data = iio_priv(indio_dev);
+	int rate, range;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		rate = hmc5843_get_samp_freq_index(data, val, val2);
+		if (rate < 0)
+			return -EINVAL;
+
+		return hmc5843_set_samp_freq(data, rate);
+	case IIO_CHAN_INFO_SCALE:
+		range = hmc5843_get_scale_index(data, val, val2);
+		if (range < 0)
+			return -EINVAL;
+
+		return hmc5843_set_range_gain(data, range);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t hmc5843_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct hmc5843_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = hmc5843_wait_measurement(data);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		goto done;
+	}
+
+	ret = i2c_smbus_read_i2c_block_data(data->client,
+		HMC5843_DATA_OUT_MSB_REGS, 3 * sizeof(__be16),
+			(u8 *) data->buffer);
+	mutex_unlock(&data->lock);
+	if (ret < 0)
+		goto done;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+		iio_get_time_ns());
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+#define HMC5843_CHANNEL(axis, idx)					\
 	{								\
 		.type = IIO_MAGN,					\
 		.modified = 1,						\
 		.channel2 = IIO_MOD_##axis,				\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
-		.address = addr						\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+		.scan_index = idx,					\
+		.scan_type = IIO_ST('s', 16, 16, IIO_BE),		\
 	}
 
 static const struct iio_chan_spec hmc5843_channels[] = {
-	HMC5843_CHANNEL(X, HMC5843_DATA_OUT_X_MSB_REG),
-	HMC5843_CHANNEL(Y, HMC5843_DATA_OUT_Y_MSB_REG),
-	HMC5843_CHANNEL(Z, HMC5843_DATA_OUT_Z_MSB_REG),
+	HMC5843_CHANNEL(X, 0),
+	HMC5843_CHANNEL(Y, 1),
+	HMC5843_CHANNEL(Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+/* Beware: Y and Z are exchanged on HMC5883 */
 static const struct iio_chan_spec hmc5883_channels[] = {
-	HMC5843_CHANNEL(X, HMC5843_DATA_OUT_X_MSB_REG),
-	HMC5843_CHANNEL(Y, HMC5883_DATA_OUT_Y_MSB_REG),
-	HMC5843_CHANNEL(Z, HMC5883_DATA_OUT_Z_MSB_REG),
+	HMC5843_CHANNEL(X, 0),
+	HMC5843_CHANNEL(Z, 1),
+	HMC5843_CHANNEL(Y, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
 static struct attribute *hmc5843_attributes[] = {
 	&iio_dev_attr_meas_conf.dev_attr.attr,
-	&iio_dev_attr_operating_mode.dev_attr.attr,
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
-	&iio_dev_attr_in_magn_range.dev_attr.attr,
+	&iio_dev_attr_scale_available.dev_attr.attr,
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	NULL
 };
@@ -590,89 +483,101 @@
 static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
 	[HMC5843_ID] = {
 		.channels = hmc5843_channels,
-		.regval_to_sample_freq = hmc5843_regval_to_sample_freq,
-		.regval_to_input_field_mga =
-			hmc5843_regval_to_input_field_mga,
+		.regval_to_samp_freq = hmc5843_regval_to_samp_freq,
 		.regval_to_nanoscale = hmc5843_regval_to_nanoscale,
 	},
 	[HMC5883_ID] = {
 		.channels = hmc5883_channels,
-		.regval_to_sample_freq = hmc5883_regval_to_sample_freq,
-		.regval_to_input_field_mga =
-			hmc5883_regval_to_input_field_mga,
+		.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
 		.regval_to_nanoscale = hmc5883_regval_to_nanoscale,
 	},
 	[HMC5883L_ID] = {
 		.channels = hmc5883_channels,
-		.regval_to_sample_freq = hmc5883_regval_to_sample_freq,
-		.regval_to_input_field_mga =
-			hmc5883l_regval_to_input_field_mga,
+		.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
 		.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
 	},
 };
 
-/* Called when we have found a new HMC58X3 */
-static void hmc5843_init_client(struct i2c_client *client,
-				const struct i2c_device_id *id)
+static int hmc5843_init(struct hmc5843_data *data)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct hmc5843_data *data = iio_priv(indio_dev);
+	int ret;
+	u8 id[3];
 
-	data->variant = &hmc5843_chip_info_tbl[id->driver_data];
-	indio_dev->channels = data->variant->channels;
-	indio_dev->num_channels = 3;
-	hmc5843_set_meas_conf(client, data->meas_conf);
-	hmc5843_set_rate(client, data->rate);
-	hmc5843_configure(client, data->operating_mode);
-	i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_B, data->range);
-	mutex_init(&data->lock);
+	ret = i2c_smbus_read_i2c_block_data(data->client, HMC5843_ID_REG,
+		sizeof(id), id);
+	if (ret < 0)
+		return ret;
+	if (id[0] != 'H' || id[1] != '4' || id[2] != '3') {
+		dev_err(&data->client->dev, "no HMC5843/5883/5883L sensor\n");
+		return -ENODEV;
+	}
 
-	pr_info("%s initialized\n", id->name);
+	ret = hmc5843_set_meas_conf(data, HMC5843_MEAS_CONF_NORMAL);
+	if (ret < 0)
+		return ret;
+	ret = hmc5843_set_samp_freq(data, HMC5843_RATE_DEFAULT);
+	if (ret < 0)
+		return ret;
+	ret = hmc5843_set_range_gain(data, HMC5843_RANGE_GAIN_DEFAULT);
+	if (ret < 0)
+		return ret;
+	return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS);
 }
 
 static const struct iio_info hmc5843_info = {
 	.attrs = &hmc5843_group,
 	.read_raw = &hmc5843_read_raw,
+	.write_raw = &hmc5843_write_raw,
+	.write_raw_get_fmt = &hmc5843_write_raw_get_fmt,
 	.driver_module = THIS_MODULE,
 };
 
+static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
+
 static int hmc5843_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct hmc5843_data *data;
 	struct iio_dev *indio_dev;
-	int err = 0;
+	int ret;
 
-	indio_dev = iio_device_alloc(sizeof(*data));
-	if (indio_dev == NULL) {
-		err = -ENOMEM;
-		goto exit;
-	}
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (indio_dev == NULL)
+		return -ENOMEM;
 
 	/* default settings at probe */
 	data = iio_priv(indio_dev);
-	data->meas_conf = HMC5843_MEAS_CONF_NORMAL;
-	data->range = HMC5843_RANGE_GAIN_DEFAULT;
-	data->operating_mode = HMC5843_MODE_CONVERSION_CONTINUOUS;
+	data->client = client;
+	data->variant = &hmc5843_chip_info_tbl[id->driver_data];
+	mutex_init(&data->lock);
 
 	i2c_set_clientdata(client, indio_dev);
-	hmc5843_init_client(client, id);
-
 	indio_dev->info = &hmc5843_info;
 	indio_dev->name = id->name;
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = data->variant->channels;
+	indio_dev->num_channels = 4;
+	indio_dev->available_scan_masks = hmc5843_scan_masks;
 
-	err = iio_device_register(indio_dev);
-	if (err)
-		goto exit_free2;
+	ret = hmc5843_init(data);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+		hmc5843_trigger_handler, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto buffer_cleanup;
 
 	return 0;
 
-exit_free2:
-	iio_device_free(indio_dev);
-exit:
-	return err;
+buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
 }
 
 static int hmc5843_remove(struct i2c_client *client)
@@ -680,9 +585,10 @@
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 
 	iio_device_unregister(indio_dev);
-	 /*  sleep mode to save power */
-	hmc5843_configure(client, HMC5843_MODE_SLEEP);
-	iio_device_free(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	/*  sleep mode to save power */
+	hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP);
 
 	return 0;
 }
@@ -690,19 +596,18 @@
 #ifdef CONFIG_PM_SLEEP
 static int hmc5843_suspend(struct device *dev)
 {
-	hmc5843_configure(to_i2c_client(dev), HMC5843_MODE_SLEEP);
-	return 0;
+	struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+
+	return hmc5843_set_mode(data, HMC5843_MODE_SLEEP);
 }
 
 static int hmc5843_resume(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct hmc5843_data *data = iio_priv(indio_dev);
+	struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
 
-	hmc5843_configure(client, data->operating_mode);
-
-	return 0;
+	return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS);
 }
 
 static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_suspend, hmc5843_resume);
@@ -730,6 +635,6 @@
 };
 module_i2c_driver(hmc5843_driver);
 
-MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com");
+MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com>");
 MODULE_DESCRIPTION("HMC5843/5883/5883L driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index 74025fb..6200335 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -186,9 +186,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u8 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7753_spi_write_reg_8(dev, this_attr->address, val);
@@ -204,9 +204,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u16 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7753_spi_write_reg_16(dev, this_attr->address, val);
@@ -399,11 +399,11 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7753_state *st = iio_priv(indio_dev);
-	unsigned long val;
+	u16 val;
 	int ret;
 	u16 reg, t;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		return ret;
 	if (val == 0)
@@ -497,11 +497,9 @@
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_device_alloc(sizeof(*st));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 	/* this is only used for removal purposes */
 	spi_set_drvdata(spi, indio_dev);
 
@@ -517,19 +515,13 @@
 	/* Get the device into a sane initial state */
 	ret = ade7753_initial_setup(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(indio_dev);
-
-error_ret:
-	return ret;
 }
 
 /* fixme, confirm ordering in this function */
@@ -539,7 +531,6 @@
 
 	iio_device_unregister(indio_dev);
 	ade7753_stop_device(&indio_dev->dev);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index f649ebe..2e046f6 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -186,9 +186,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u8 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7754_spi_write_reg_8(dev, this_attr->address, val);
@@ -204,9 +204,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u16 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7754_spi_write_reg_16(dev, this_attr->address, val);
@@ -419,11 +419,11 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7754_state *st = iio_priv(indio_dev);
-	unsigned long val;
+	u16 val;
 	int ret;
 	u8 reg, t;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		return ret;
 	if (val == 0)
@@ -520,11 +520,9 @@
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_device_alloc(sizeof(*st));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 	/* this is only used for removal purposes */
 	spi_set_drvdata(spi, indio_dev);
 
@@ -540,18 +538,12 @@
 	/* Get the device into a sane initial state */
 	ret = ade7754_initial_setup(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(indio_dev);
-
-error_ret:
-	return ret;
 }
 
 /* fixme, confirm ordering in this function */
@@ -561,7 +553,6 @@
 
 	iio_device_unregister(indio_dev);
 	ade7754_stop_device(&indio_dev->dev);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index 6005d4a..cba183e 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -269,9 +269,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u8 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7758_spi_write_reg_8(dev, this_attr->address, val);
@@ -287,9 +287,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u16 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7758_spi_write_reg_16(dev, this_attr->address, val);
@@ -502,11 +502,11 @@
 		size_t len)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	unsigned long val;
+	u16 val;
 	int ret;
 	u8 reg, t;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		return ret;
 
@@ -849,12 +849,11 @@
 {
 	int ret;
 	struct ade7758_state *st;
-	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+	struct iio_dev *indio_dev;
 
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 
 	st = iio_priv(indio_dev);
 	/* this is only used for removal purposes */
@@ -862,10 +861,8 @@
 
 	/* Allocate the comms buffers */
 	st->rx = kcalloc(ADE7758_MAX_RX, sizeof(*st->rx), GFP_KERNEL);
-	if (st->rx == NULL) {
-		ret = -ENOMEM;
-		goto error_free_dev;
-	}
+	if (!st->rx)
+		return -ENOMEM;
 	st->tx = kcalloc(ADE7758_MAX_TX, sizeof(*st->tx), GFP_KERNEL);
 	if (st->tx == NULL) {
 		ret = -ENOMEM;
@@ -920,9 +917,6 @@
 	kfree(st->tx);
 error_free_rx:
 	kfree(st->rx);
-error_free_dev:
-	iio_device_free(indio_dev);
-error_ret:
 	return ret;
 }
 
@@ -939,8 +933,6 @@
 	kfree(st->tx);
 	kfree(st->rx);
 
-	iio_device_free(indio_dev);
-
 	return 0;
 }
 
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index 7d5db71..c0accf8 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -69,11 +69,7 @@
 		if (ade7758_spi_read_burst(indio_dev) >= 0)
 			*dat32 = get_unaligned_be32(&st->rx_buf[5]) & 0xFFFFFF;
 
-	/* Guaranteed to be aligned with 8 byte boundary */
-	if (indio_dev->scan_timestamp)
-		dat64[1] = pf->timestamp;
-
-	iio_push_to_buffers(indio_dev, (u8 *)dat64);
+	iio_push_to_buffers_with_timestamp(indio_dev, dat64, pf->timestamp);
 
 	iio_trigger_notify_done(indio_dev->trig);
 
@@ -91,15 +87,10 @@
 {
 	struct ade7758_state *st = iio_priv(indio_dev);
 	unsigned channel;
-	int ret;
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
-	ret = iio_sw_buffer_preenable(indio_dev);
-	if (ret < 0)
-		return ret;
-
 	channel = find_first_bit(indio_dev->active_scan_mask,
 				 indio_dev->masklength);
 
@@ -125,14 +116,17 @@
 int ade7758_configure_ring(struct iio_dev *indio_dev)
 {
 	struct ade7758_state *st = iio_priv(indio_dev);
+	struct iio_buffer *buffer;
 	int ret = 0;
 
-	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
-	if (!indio_dev->buffer) {
+	buffer = iio_kfifo_allocate(indio_dev);
+	if (!buffer) {
 		ret = -ENOMEM;
 		return ret;
 	}
 
+	iio_device_attach_buffer(indio_dev, buffer);
+
 	indio_dev->setup_ops = &ade7758_ring_setup_ops;
 
 	indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index d214ac49..145f896 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -185,9 +185,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u8 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7759_spi_write_reg_8(dev, this_attr->address, val);
@@ -203,9 +203,9 @@
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
-	long val;
+	u16 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = ade7759_spi_write_reg_16(dev, this_attr->address, val);
@@ -360,11 +360,11 @@
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7759_state *st = iio_priv(indio_dev);
-	unsigned long val;
+	u16 val;
 	int ret;
 	u16 reg, t;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		return ret;
 	if (val == 0)
@@ -444,11 +444,9 @@
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_device_alloc(sizeof(*st));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 	/* this is only used for removal purposes */
 	spi_set_drvdata(spi, indio_dev);
 
@@ -463,18 +461,13 @@
 	/* Get the device into a sane initial state */
 	ret = ade7759_initial_setup(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(indio_dev);
-error_ret:
-	return ret;
 }
 
 /* fixme, confirm ordering in this function */
@@ -484,7 +477,6 @@
 
 	iio_device_unregister(indio_dev);
 	ade7759_stop_device(&indio_dev->dev);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c
index db9ef6c..5b33c7f 100644
--- a/drivers/staging/iio/meter/ade7854-i2c.c
+++ b/drivers/staging/iio/meter/ade7854-i2c.c
@@ -208,7 +208,7 @@
 	struct ade7854_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_device_alloc(sizeof(*st));
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
@@ -225,8 +225,6 @@
 	st->irq = client->irq;
 
 	ret = ade7854_probe(indio_dev, &client->dev);
-	if (ret)
-		iio_device_free(indio_dev);
 
 	return ret;
 }
diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c
index 4c6d204..94f73bb 100644
--- a/drivers/staging/iio/meter/ade7854-spi.c
+++ b/drivers/staging/iio/meter/ade7854-spi.c
@@ -278,7 +278,7 @@
 	struct ade7854_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_device_alloc(sizeof(*st));
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
@@ -296,8 +296,6 @@
 
 
 	ret = ade7854_probe(indio_dev, &spi->dev);
-	if (ret)
-		iio_device_free(indio_dev);
 
 	return ret;
 }
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index e8379c0..d620bbd 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -100,9 +100,9 @@
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
-	long val;
+	u8 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou8(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = st->write_reg_8(dev, this_attr->address, val);
@@ -121,9 +121,9 @@
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
-	long val;
+	u16 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou16(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = st->write_reg_16(dev, this_attr->address, val);
@@ -142,9 +142,9 @@
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
-	long val;
+	u32 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou32(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = st->write_reg_24(dev, this_attr->address, val);
@@ -163,9 +163,9 @@
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
-	long val;
+	u32 val;
 
-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtou32(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 	ret = st->write_reg_32(dev, this_attr->address, val);
@@ -550,7 +550,7 @@
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	/* Get the device into a sane initial state */
 	ret = ade7854_initial_setup(indio_dev);
@@ -561,9 +561,6 @@
 
 error_unreg_dev:
 	iio_device_unregister(indio_dev);
-error_free_dev:
-	iio_device_free(indio_dev);
-
 	return ret;
 }
 EXPORT_SYMBOL(ade7854_probe);
@@ -571,7 +568,6 @@
 int ade7854_remove(struct iio_dev *indio_dev)
 {
 	iio_device_unregister(indio_dev);
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
index 7122116..62d3017 100644
--- a/drivers/staging/iio/resolver/ad2s1200.c
+++ b/drivers/staging/iio/resolver/ad2s1200.c
@@ -107,16 +107,16 @@
 	unsigned short *pins = spi->dev.platform_data;
 
 	for (pn = 0; pn < AD2S1200_PN; pn++)
-		if (gpio_request_one(pins[pn], GPIOF_DIR_OUT, DRV_NAME)) {
-			pr_err("%s: request gpio pin %d failed\n",
-						DRV_NAME, pins[pn]);
-			goto error_ret;
+		ret = devm_gpio_request_one(&spi->dev, pins[pn], GPIOF_DIR_OUT,
+					    DRV_NAME);
+		if (ret) {
+			dev_err(&spi->dev, "request gpio pin %d failed\n",
+							pins[pn]);
+			return ret;
 		}
-	indio_dev = iio_device_alloc(sizeof(*st));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 	spi_set_drvdata(spi, indio_dev);
 	st = iio_priv(indio_dev);
 	mutex_init(&st->lock);
@@ -133,26 +133,18 @@
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	spi->max_speed_hz = AD2S1200_HZ;
 	spi->mode = SPI_MODE_3;
 	spi_setup(spi);
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(indio_dev);
-error_ret:
-	for (--pn; pn >= 0; pn--)
-		gpio_free(pins[pn]);
-	return ret;
 }
 
 static int ad2s1200_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index dcdadbb..6966d5f 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -206,10 +206,10 @@
 				     size_t len)
 {
 	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
-	unsigned long fclkin;
+	unsigned int fclkin;
 	int ret;
 
-	ret = strict_strtoul(buf, 10, &fclkin);
+	ret = kstrtouint(buf, 10, &fclkin);
 	if (ret)
 		return ret;
 	if (fclkin < AD2S1210_MIN_CLKIN || fclkin > AD2S1210_MAX_CLKIN) {
@@ -243,10 +243,10 @@
 				     const char *buf, size_t len)
 {
 	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
-	unsigned long fexcit;
+	unsigned int fexcit;
 	int ret;
 
-	ret = strict_strtoul(buf, 10, &fexcit);
+	ret = kstrtouint(buf, 10, &fexcit);
 	if (ret < 0)
 		return ret;
 	if (fexcit < AD2S1210_MIN_EXCIT || fexcit > AD2S1210_MAX_EXCIT) {
@@ -282,11 +282,11 @@
 			const char *buf, size_t len)
 {
 	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
-	unsigned long udata;
+	unsigned char udata;
 	unsigned char data;
 	int ret;
 
-	ret = strict_strtoul(buf, 16, &udata);
+	ret = kstrtou8(buf, 16, &udata);
 	if (ret)
 		return -EINVAL;
 
@@ -337,10 +337,10 @@
 {
 	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	unsigned char data;
-	unsigned long udata;
+	unsigned char udata;
 	int ret;
 
-	ret = strict_strtoul(buf, 10, &udata);
+	ret = kstrtou8(buf, 10, &udata);
 	if (ret || udata < 10 || udata > 16) {
 		pr_err("ad2s1210: resolution out of range\n");
 		return -EINVAL;
@@ -438,11 +438,11 @@
 		struct device_attribute *attr, const char *buf, size_t len)
 {
 	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
-	unsigned long data;
+	unsigned char data;
 	int ret;
 	struct iio_dev_attr *iattr = to_iio_dev_attr(attr);
 
-	ret = strict_strtoul(buf, 10, &data);
+	ret = kstrtou8(buf, 10, &data);
 	if (ret)
 		return -EINVAL;
 	mutex_lock(&st->lock);
@@ -669,16 +669,14 @@
 	if (spi->dev.platform_data == NULL)
 		return -EINVAL;
 
-	indio_dev = iio_device_alloc(sizeof(*st));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 	st = iio_priv(indio_dev);
 	st->pdata = spi->dev.platform_data;
 	ret = ad2s1210_setup_gpios(st);
 	if (ret < 0)
-		goto error_free_dev;
+		return ret;
 
 	spi_set_drvdata(spi, indio_dev);
 
@@ -709,9 +707,6 @@
 
 error_free_gpios:
 	ad2s1210_free_gpios(st);
-error_free_dev:
-	iio_device_free(indio_dev);
-error_ret:
 	return ret;
 }
 
@@ -721,7 +716,6 @@
 
 	iio_device_unregister(indio_dev);
 	ad2s1210_free_gpios(iio_priv(indio_dev));
-	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
index 40b8252..e24c589 100644
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -64,11 +64,9 @@
 	struct ad2s90_state *st;
 	int ret = 0;
 
-	indio_dev = iio_device_alloc(sizeof(*st));
-	if (indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 	st = iio_priv(indio_dev);
 	spi_set_drvdata(spi, indio_dev);
 
@@ -83,7 +81,7 @@
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_dev;
+		return ret;
 
 	/* need 600ns between CS and the first falling edge of SCLK */
 	spi->max_speed_hz = 830000;
@@ -91,17 +89,11 @@
 	spi_setup(spi);
 
 	return 0;
-
-error_free_dev:
-	iio_device_free(indio_dev);
-error_ret:
-	return ret;
 }
 
 static int ad2s90_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index 38a158b..26e1ca0 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -83,32 +83,28 @@
 {
 	struct iio_trigger *trig = to_iio_trigger(dev);
 	struct bfin_tmr_state *st = iio_trigger_get_drvdata(trig);
-	unsigned long val;
+	unsigned int val;
 	bool enabled;
 	int ret;
 
-	ret = strict_strtoul(buf, 10, &val);
+	ret = kstrtouint(buf, 10, &val);
 	if (ret)
-		goto error_ret;
+		return ret;
 
-	if (val > 100000) {
-		ret = -EINVAL;
-		goto error_ret;
-	}
+	if (val > 100000)
+		return -EINVAL;
 
 	enabled = get_enabled_gptimers() & st->t->bit;
 
 	if (enabled)
 		disable_gptimers(st->t->bit);
 
-	if (!val)
-		goto error_ret;
+	if (val == 0)
+		return count;
 
 	val = get_sclk() / val;
-	if (val <= 4 || val <= st->duty) {
-		ret = -EINVAL;
-		goto error_ret;
-	}
+	if (val <= 4 || val <= st->duty)
+		return -EINVAL;
 
 	set_gptimer_period(st->t->id, val);
 	set_gptimer_pwidth(st->t->id, val - st->duty);
@@ -116,8 +112,7 @@
 	if (enabled)
 		enable_gptimers(st->t->bit);
 
-error_ret:
-	return ret ? ret : count;
+	return count;
 }
 
 static ssize_t iio_bfin_tmr_frequency_show(struct device *dev,
diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
index 7969597..48a6afa 100644
--- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
+++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
@@ -53,10 +53,10 @@
 {
 	struct iio_trigger *trig = to_iio_trigger(dev);
 	struct iio_prtc_trigger_info *trig_info = iio_trigger_get_drvdata(trig);
-	unsigned long val;
+	int val;
 	int ret;
 
-	ret = strict_strtoul(buf, 10, &val);
+	ret = kstrtoint(buf, 10, &val);
 	if (ret)
 		goto error_ret;
 
diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile
index bfaf693..2c3a9e1 100644
--- a/drivers/staging/imx-drm/Makefile
+++ b/drivers/staging/imx-drm/Makefile
@@ -8,4 +8,4 @@
 obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
 obj-$(CONFIG_DRM_IMX_FB_HELPER) += imx-fbdev.o
 obj-$(CONFIG_DRM_IMX_IPUV3_CORE) += ipu-v3/
-obj-$(CONFIG_DRM_IMX_IPUV3)	+= ipuv3-crtc.o
+obj-$(CONFIG_DRM_IMX_IPUV3)	+= ipuv3-crtc.o ipuv3-plane.o
diff --git a/drivers/staging/imx-drm/TODO b/drivers/staging/imx-drm/TODO
index 9cfa2a7..6a9da94 100644
--- a/drivers/staging/imx-drm/TODO
+++ b/drivers/staging/imx-drm/TODO
@@ -9,7 +9,6 @@
 
 Missing features (not necessarily for moving out of staging):
 
-- Add KMS plane support for CRTC driver
 - Add i.MX6 HDMI support
 - Add support for IC (Image converter)
 - Add support for CSI (CMOS Sensor interface)
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index a2e52a0..4483d47 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -68,6 +68,11 @@
 	struct module				*owner;
 };
 
+int imx_drm_crtc_id(struct imx_drm_crtc *crtc)
+{
+	return crtc->pipe;
+}
+
 static void imx_drm_driver_lastclose(struct drm_device *drm)
 {
 	struct imx_drm_device *imxdrm = drm->dev_private;
@@ -110,18 +115,12 @@
 	struct imx_drm_crtc *imx_crtc;
 	struct imx_drm_crtc_helper_funcs *helper;
 
-	mutex_lock(&imxdrm->mutex);
-
 	list_for_each_entry(imx_crtc, &imxdrm->crtc_list, list)
 		if (imx_crtc->crtc == crtc)
 			goto found;
 
-	mutex_unlock(&imxdrm->mutex);
-
 	return -EINVAL;
 found:
-	mutex_unlock(&imxdrm->mutex);
-
 	helper = &imx_crtc->imx_drm_helper_funcs;
 	if (helper->set_interface_pix_fmt)
 		return helper->set_interface_pix_fmt(crtc,
@@ -191,6 +190,18 @@
 	imx_drm_crtc->imx_drm_helper_funcs.disable_vblank(imx_drm_crtc->crtc);
 }
 
+static void imx_drm_driver_preclose(struct drm_device *drm,
+		struct drm_file *file)
+{
+	int i;
+
+	if (!file->is_master)
+		return;
+
+	for (i = 0; i < 4; i++)
+		imx_drm_disable_vblank(drm , i);
+}
+
 static const struct file_operations imx_drm_driver_fops = {
 	.owner = THIS_MODULE,
 	.open = drm_open,
@@ -647,20 +658,14 @@
 	struct imx_drm_crtc *imx_crtc;
 	int i = 0;
 
-	mutex_lock(&imxdrm->mutex);
-
 	list_for_each_entry(imx_crtc, &imxdrm->crtc_list, list) {
 		if (imx_crtc->crtc == crtc)
 			goto found;
 		i++;
 	}
 
-	mutex_unlock(&imxdrm->mutex);
-
 	return -EINVAL;
 found:
-	mutex_unlock(&imxdrm->mutex);
-
 	return i;
 }
 EXPORT_SYMBOL_GPL(imx_drm_encoder_get_mux_id);
@@ -774,16 +779,26 @@
 };
 
 static struct drm_driver imx_drm_driver = {
-	.driver_features	= DRIVER_MODESET | DRIVER_GEM,
+	.driver_features	= DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME,
 	.load			= imx_drm_driver_load,
 	.unload			= imx_drm_driver_unload,
 	.lastclose		= imx_drm_driver_lastclose,
+	.preclose		= imx_drm_driver_preclose,
 	.gem_free_object	= drm_gem_cma_free_object,
 	.gem_vm_ops		= &drm_gem_cma_vm_ops,
 	.dumb_create		= drm_gem_cma_dumb_create,
 	.dumb_map_offset	= drm_gem_cma_dumb_map_offset,
 	.dumb_destroy		= drm_gem_dumb_destroy,
 
+	.prime_handle_to_fd	= drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle	= drm_gem_prime_fd_to_handle,
+	.gem_prime_import	= drm_gem_prime_import,
+	.gem_prime_export	= drm_gem_prime_export,
+	.gem_prime_get_sg_table	= drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap		= drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap	= drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap		= drm_gem_cma_prime_mmap,
 	.get_vblank_counter	= drm_vblank_count,
 	.enable_vblank		= imx_drm_enable_vblank,
 	.disable_vblank		= imx_drm_disable_vblank,
@@ -837,8 +852,8 @@
 	INIT_LIST_HEAD(&imx_drm_device->encoder_list);
 
 	imx_drm_pdev = platform_device_register_simple("imx-drm", -1, NULL, 0);
-	if (!imx_drm_pdev) {
-		ret = -EINVAL;
+	if (IS_ERR(imx_drm_pdev)) {
+		ret = PTR_ERR(imx_drm_pdev);
 		goto err_pdev;
 	}
 
diff --git a/drivers/staging/imx-drm/imx-drm.h b/drivers/staging/imx-drm/imx-drm.h
index f2aac91..ae90c9c 100644
--- a/drivers/staging/imx-drm/imx-drm.h
+++ b/drivers/staging/imx-drm/imx-drm.h
@@ -14,6 +14,8 @@
 struct drm_framebuffer;
 struct platform_device;
 
+int imx_drm_crtc_id(struct imx_drm_crtc *crtc);
+
 struct imx_drm_crtc_helper_funcs {
 	int (*enable_vblank)(struct drm_crtc *crtc);
 	void (*disable_vblank)(struct drm_crtc *crtc);
diff --git a/drivers/staging/imx-drm/imx-ldb.c b/drivers/staging/imx-drm/imx-ldb.c
index af733ea..654bf03 100644
--- a/drivers/staging/imx-drm/imx-ldb.c
+++ b/drivers/staging/imx-drm/imx-ldb.c
@@ -359,10 +359,8 @@
 
 	sprintf(clkname, "di%d_pll", chno);
 	ldb->clk_pll[chno] = devm_clk_get(ldb->dev, clkname);
-	if (IS_ERR(ldb->clk_pll[chno]))
-		return PTR_ERR(ldb->clk_pll[chno]);
 
-	return 0;
+	return PTR_ERR_OR_ZERO(ldb->clk_pll[chno]);
 }
 
 static int imx_ldb_register(struct imx_ldb_channel *imx_ldb_ch)
@@ -421,7 +419,7 @@
 	[LVDS_BIT_MAP_JEIDA] = "jeida",
 };
 
-const int of_get_data_mapping(struct device_node *np)
+static const int of_get_data_mapping(struct device_node *np)
 {
 	const char *bm;
 	int ret, i;
@@ -466,8 +464,7 @@
 {
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *of_id =
-			of_match_device(of_match_ptr(imx_ldb_dt_ids),
-					&pdev->dev);
+			of_match_device(imx_ldb_dt_ids, &pdev->dev);
 	struct device_node *child;
 	const u8 *edidp;
 	struct imx_ldb *imx_ldb;
diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c
index 33d6525..680f4c8 100644
--- a/drivers/staging/imx-drm/imx-tve.c
+++ b/drivers/staging/imx-drm/imx-tve.c
@@ -151,7 +151,7 @@
 
 	spin_lock_irqsave(&tve->enable_lock, flags);
 	if (!tve->enabled) {
-		tve->enabled = 1;
+		tve->enabled = true;
 		clk_prepare_enable(tve->clk);
 		ret = regmap_update_bits(tve->regmap, TVE_COM_CONF_REG,
 					 TVE_IPU_CLK_EN | TVE_EN,
@@ -180,7 +180,7 @@
 
 	spin_lock_irqsave(&tve->enable_lock, flags);
 	if (tve->enabled) {
-		tve->enabled = 0;
+		tve->enabled = false;
 		ret = regmap_update_bits(tve->regmap, TVE_COM_CONF_REG,
 					 TVE_IPU_CLK_EN | TVE_EN, 0);
 		clk_disable_unprepare(tve->clk);
@@ -696,7 +696,7 @@
 	if (val != 0x00100000) {
 		dev_err(&pdev->dev, "configuration register default value indicates this is not a TVEv2\n");
 		return -ENODEV;
-	};
+	}
 
 	/* disable cable detection for VGA mode */
 	ret = regmap_write(tve->regmap, TVE_CD_CONT_REG, 0);
diff --git a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h
index 74c022e..4826b5c 100644
--- a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h
+++ b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h
@@ -97,6 +97,7 @@
 
 int ipu_idmac_enable_channel(struct ipuv3_channel *channel);
 int ipu_idmac_disable_channel(struct ipuv3_channel *channel);
+int ipu_idmac_wait_busy(struct ipuv3_channel *channel, int ms);
 
 void ipu_idmac_set_double_buffer(struct ipuv3_channel *channel,
 		bool doublebuffer);
@@ -283,7 +284,7 @@
 		int width);
 
 int ipu_cpmem_set_format_rgb(struct ipu_ch_param __iomem *,
-		struct ipu_rgb *rgb);
+		const struct ipu_rgb *rgb);
 
 static inline void ipu_cpmem_interlaced_scan(struct ipu_ch_param *p,
 		int stride)
@@ -303,6 +304,7 @@
 int ipu_cpmem_set_image(struct ipu_ch_param __iomem *cpmem,
 		struct ipu_image *image);
 
+enum ipu_color_space ipu_drm_fourcc_to_colorspace(u32 drm_fourcc);
 enum ipu_color_space ipu_pixelformat_to_colorspace(u32 pixelformat);
 
 static inline void ipu_cpmem_set_burstsize(struct ipu_ch_param __iomem *p,
diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-common.c b/drivers/staging/imx-drm/ipu-v3/ipu-common.c
index ba464e5..7a22ce6 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-common.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-common.c
@@ -30,6 +30,8 @@
 #include <linux/irqdomain.h>
 #include <linux/of_device.h>
 
+#include <drm/drm_fourcc.h>
+
 #include "imx-ipu-v3.h"
 #include "ipu-prv.h"
 
@@ -139,7 +141,7 @@
 EXPORT_SYMBOL_GPL(ipu_ch_param_read_field);
 
 int ipu_cpmem_set_format_rgb(struct ipu_ch_param __iomem *p,
-		struct ipu_rgb *rgb)
+		const struct ipu_rgb *rgb)
 {
 	int bpp = 0, npb = 0, ro, go, bo, to;
 
@@ -282,7 +284,7 @@
 }
 EXPORT_SYMBOL_GPL(ipu_cpmem_set_yuv_planar);
 
-static struct ipu_rgb def_rgb_32 = {
+static const struct ipu_rgb def_rgb_32 = {
 	.red	= { .offset = 16, .length = 8, },
 	.green	= { .offset =  8, .length = 8, },
 	.blue	= { .offset =  0, .length = 8, },
@@ -290,15 +292,23 @@
 	.bits_per_pixel = 32,
 };
 
-static struct ipu_rgb def_bgr_32 = {
-	.red	= { .offset = 16, .length = 8, },
+static const struct ipu_rgb def_bgr_32 = {
+	.red	= { .offset =  0, .length = 8, },
 	.green	= { .offset =  8, .length = 8, },
-	.blue	= { .offset =  0, .length = 8, },
+	.blue	= { .offset = 16, .length = 8, },
 	.transp = { .offset = 24, .length = 8, },
 	.bits_per_pixel = 32,
 };
 
-static struct ipu_rgb def_rgb_24 = {
+static const struct ipu_rgb def_rgb_24 = {
+	.red	= { .offset = 16, .length = 8, },
+	.green	= { .offset =  8, .length = 8, },
+	.blue	= { .offset =  0, .length = 8, },
+	.transp = { .offset =  0, .length = 0, },
+	.bits_per_pixel = 24,
+};
+
+static const struct ipu_rgb def_bgr_24 = {
 	.red	= { .offset =  0, .length = 8, },
 	.green	= { .offset =  8, .length = 8, },
 	.blue	= { .offset = 16, .length = 8, },
@@ -306,15 +316,7 @@
 	.bits_per_pixel = 24,
 };
 
-static struct ipu_rgb def_bgr_24 = {
-	.red	= { .offset = 16, .length = 8, },
-	.green	= { .offset =  8, .length = 8, },
-	.blue	= { .offset =  0, .length = 8, },
-	.transp = { .offset =  0, .length = 0, },
-	.bits_per_pixel = 24,
-};
-
-static struct ipu_rgb def_rgb_16 = {
+static const struct ipu_rgb def_rgb_16 = {
 	.red	= { .offset = 11, .length = 5, },
 	.green	= { .offset =  5, .length = 6, },
 	.blue	= { .offset =  0, .length = 5, },
@@ -322,6 +324,14 @@
 	.bits_per_pixel = 16,
 };
 
+static const struct ipu_rgb def_bgr_16 = {
+	.red	= { .offset =  0, .length = 5, },
+	.green	= { .offset =  5, .length = 6, },
+	.blue	= { .offset = 11, .length = 5, },
+	.transp = { .offset =  0, .length = 0, },
+	.bits_per_pixel = 16,
+};
+
 #define Y_OFFSET(pix, x, y)	((x) + pix->width * (y))
 #define U_OFFSET(pix, x, y)	((pix->width * pix->height) + \
 					(pix->width * (y) / 4) + (x) / 2)
@@ -329,17 +339,17 @@
 					(pix->width * pix->height / 4) + \
 					(pix->width * (y) / 4) + (x) / 2)
 
-int ipu_cpmem_set_fmt(struct ipu_ch_param __iomem *cpmem, u32 pixelformat)
+int ipu_cpmem_set_fmt(struct ipu_ch_param __iomem *cpmem, u32 drm_fourcc)
 {
-	switch (pixelformat) {
-	case V4L2_PIX_FMT_YUV420:
-	case V4L2_PIX_FMT_YVU420:
+	switch (drm_fourcc) {
+	case DRM_FORMAT_YUV420:
+	case DRM_FORMAT_YVU420:
 		/* pix format */
 		ipu_ch_param_write_field(cpmem, IPU_FIELD_PFS, 2);
 		/* burst size */
 		ipu_ch_param_write_field(cpmem, IPU_FIELD_NPB, 63);
 		break;
-	case V4L2_PIX_FMT_UYVY:
+	case DRM_FORMAT_UYVY:
 		/* bits/pixel */
 		ipu_ch_param_write_field(cpmem, IPU_FIELD_BPP, 3);
 		/* pix format */
@@ -347,7 +357,7 @@
 		/* burst size */
 		ipu_ch_param_write_field(cpmem, IPU_FIELD_NPB, 31);
 		break;
-	case V4L2_PIX_FMT_YUYV:
+	case DRM_FORMAT_YUYV:
 		/* bits/pixel */
 		ipu_ch_param_write_field(cpmem, IPU_FIELD_BPP, 3);
 		/* pix format */
@@ -355,20 +365,25 @@
 		/* burst size */
 		ipu_ch_param_write_field(cpmem, IPU_FIELD_NPB, 31);
 		break;
-	case V4L2_PIX_FMT_RGB32:
-		ipu_cpmem_set_format_rgb(cpmem, &def_rgb_32);
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		ipu_cpmem_set_format_rgb(cpmem, &def_rgb_16);
-		break;
-	case V4L2_PIX_FMT_BGR32:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_XBGR8888:
 		ipu_cpmem_set_format_rgb(cpmem, &def_bgr_32);
 		break;
-	case V4L2_PIX_FMT_RGB24:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB8888:
+		ipu_cpmem_set_format_rgb(cpmem, &def_rgb_32);
+		break;
+	case DRM_FORMAT_BGR888:
+		ipu_cpmem_set_format_rgb(cpmem, &def_bgr_24);
+		break;
+	case DRM_FORMAT_RGB888:
 		ipu_cpmem_set_format_rgb(cpmem, &def_rgb_24);
 		break;
-	case V4L2_PIX_FMT_BGR24:
-		ipu_cpmem_set_format_rgb(cpmem, &def_bgr_24);
+	case DRM_FORMAT_RGB565:
+		ipu_cpmem_set_format_rgb(cpmem, &def_rgb_16);
+		break;
+	case DRM_FORMAT_BGR565:
+		ipu_cpmem_set_format_rgb(cpmem, &def_bgr_16);
 		break;
 	default:
 		return -EINVAL;
@@ -378,6 +393,79 @@
 }
 EXPORT_SYMBOL_GPL(ipu_cpmem_set_fmt);
 
+/*
+ * The V4L2 spec defines packed RGB formats in memory byte order, which from
+ * point of view of the IPU corresponds to little-endian words with the first
+ * component in the least significant bits.
+ * The DRM pixel formats and IPU internal representation are ordered the other
+ * way around, with the first named component ordered at the most significant
+ * bits. Further, V4L2 formats are not well defined:
+ *     http://linuxtv.org/downloads/v4l-dvb-apis/packed-rgb.html
+ * We choose the interpretation which matches GStreamer behavior.
+ */
+static int v4l2_pix_fmt_to_drm_fourcc(u32 pixelformat)
+{
+	switch (pixelformat) {
+	case V4L2_PIX_FMT_RGB565:
+		/*
+		 * Here we choose the 'corrected' interpretation of RGBP, a
+		 * little-endian 16-bit word with the red component at the most
+		 * significant bits:
+		 * g[2:0]b[4:0] r[4:0]g[5:3] <=> [16:0] R:G:B
+		 */
+		return DRM_FORMAT_RGB565;
+	case V4L2_PIX_FMT_BGR24:
+		/* B G R <=> [24:0] R:G:B */
+		return DRM_FORMAT_RGB888;
+	case V4L2_PIX_FMT_RGB24:
+		/* R G B <=> [24:0] B:G:R */
+		return DRM_FORMAT_BGR888;
+	case V4L2_PIX_FMT_BGR32:
+		/* B G R A <=> [32:0] A:B:G:R */
+		return DRM_FORMAT_XRGB8888;
+	case V4L2_PIX_FMT_RGB32:
+		/* R G B A <=> [32:0] A:B:G:R */
+		return DRM_FORMAT_XBGR8888;
+	case V4L2_PIX_FMT_UYVY:
+		return DRM_FORMAT_UYVY;
+	case V4L2_PIX_FMT_YUYV:
+		return DRM_FORMAT_YUYV;
+	case V4L2_PIX_FMT_YUV420:
+		return DRM_FORMAT_YUV420;
+	case V4L2_PIX_FMT_YVU420:
+		return DRM_FORMAT_YVU420;
+	}
+
+	return -EINVAL;
+}
+
+enum ipu_color_space ipu_drm_fourcc_to_colorspace(u32 drm_fourcc)
+{
+	switch (drm_fourcc) {
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_RGBX8888:
+	case DRM_FORMAT_BGRX8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_RGBA8888:
+	case DRM_FORMAT_BGRA8888:
+		return IPUV3_COLORSPACE_RGB;
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_YUV420:
+	case DRM_FORMAT_YVU420:
+		return IPUV3_COLORSPACE_YUV;
+	default:
+		return IPUV3_COLORSPACE_UNKNOWN;
+	}
+}
+EXPORT_SYMBOL_GPL(ipu_drm_fourcc_to_colorspace);
+
 int ipu_cpmem_set_image(struct ipu_ch_param __iomem *cpmem,
 		struct ipu_image *image)
 {
@@ -392,7 +480,7 @@
 			image->rect.height);
 	ipu_cpmem_set_stride(cpmem, pix->bytesperline);
 
-	ipu_cpmem_set_fmt(cpmem, pix->pixelformat);
+	ipu_cpmem_set_fmt(cpmem, v4l2_pix_fmt_to_drm_fourcc(pix->pixelformat));
 
 	switch (pix->pixelformat) {
 	case V4L2_PIX_FMT_YUV420:
@@ -476,7 +564,7 @@
 		goto out;
 	}
 
-	channel->busy = 1;
+	channel->busy = true;
 	channel->num = num;
 
 out:
@@ -494,7 +582,7 @@
 
 	mutex_lock(&ipu->channel_lock);
 
-	channel->busy = 0;
+	channel->busy = false;
 
 	mutex_unlock(&ipu->channel_lock);
 }
@@ -610,23 +698,28 @@
 }
 EXPORT_SYMBOL_GPL(ipu_idmac_enable_channel);
 
+int ipu_idmac_wait_busy(struct ipuv3_channel *channel, int ms)
+{
+	struct ipu_soc *ipu = channel->ipu;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(ms);
+	while (ipu_idmac_read(ipu, IDMAC_CHA_BUSY(channel->num)) &
+			idma_mask(channel->num)) {
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		cpu_relax();
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_idmac_wait_busy);
+
 int ipu_idmac_disable_channel(struct ipuv3_channel *channel)
 {
 	struct ipu_soc *ipu = channel->ipu;
 	u32 val;
 	unsigned long flags;
-	unsigned long timeout;
-
-	timeout = jiffies + msecs_to_jiffies(50);
-	while (ipu_idmac_read(ipu, IDMAC_CHA_BUSY(channel->num)) &
-			idma_mask(channel->num)) {
-		if (time_after(jiffies, timeout)) {
-			dev_warn(ipu->dev, "disabling busy idmac channel %d\n",
-					channel->num);
-			break;
-		}
-		cpu_relax();
-	}
 
 	spin_lock_irqsave(&ipu->lock, flags);
 
@@ -888,7 +981,7 @@
 			.dc = 5,
 			.dp = IPU_DP_FLOW_SYNC_BG,
 			.dma[0] = IPUV3_CHANNEL_MEM_BG_SYNC,
-			.dma[1] = -EINVAL,
+			.dma[1] = IPUV3_CHANNEL_MEM_FG_SYNC,
 		},
 		.name = "imx-ipuv3-crtc",
 	}, {
@@ -913,7 +1006,7 @@
 	pdev = platform_device_register_data(dev, reg->name, ipu_client_id++,
 			&reg->pdata, sizeof(struct ipu_platform_reg));
 
-	return pdev ? 0 : -EINVAL;
+	return PTR_ERR_OR_ZERO(pdev);
 }
 
 static int ipu_add_client_devices(struct ipu_soc *ipu)
diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-dc.c b/drivers/staging/imx-drm/ipu-v3/ipu-dc.c
index 21bf1c8..d0e3bc3 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-dc.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-dc.c
@@ -91,6 +91,7 @@
 	IPU_DC_MAP_RGB565,
 	IPU_DC_MAP_GBR24, /* TVEv2 */
 	IPU_DC_MAP_BGR666,
+	IPU_DC_MAP_BGR24,
 };
 
 struct ipu_dc {
@@ -152,6 +153,8 @@
 		return IPU_DC_MAP_GBR24;
 	case V4L2_PIX_FMT_BGR666:
 		return IPU_DC_MAP_BGR666;
+	case V4L2_PIX_FMT_BGR24:
+		return IPU_DC_MAP_BGR24;
 	default:
 		return -EINVAL;
 	}
@@ -313,7 +316,7 @@
 		return ERR_PTR(-EBUSY);
 	}
 
-	dc->in_use = 1;
+	dc->in_use = true;
 
 	mutex_unlock(&priv->mutex);
 
@@ -326,7 +329,7 @@
 	struct ipu_dc_priv *priv = dc->priv;
 
 	mutex_lock(&priv->mutex);
-	dc->in_use = 0;
+	dc->in_use = false;
 	mutex_unlock(&priv->mutex);
 }
 EXPORT_SYMBOL_GPL(ipu_dc_put);
@@ -395,6 +398,12 @@
 	ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 1, 11, 0xfc); /* green */
 	ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 2, 17, 0xfc); /* red */
 
+	/* bgr24 */
+	ipu_dc_map_clear(priv, IPU_DC_MAP_BGR24);
+	ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 2, 7, 0xff); /* red */
+	ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 1, 15, 0xff); /* green */
+	ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 0, 23, 0xff); /* blue */
+
 	return 0;
 }
 
diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-dmfc.c b/drivers/staging/imx-drm/ipu-v3/ipu-dmfc.c
index 2e97c33..98070dd 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-dmfc.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-dmfc.c
@@ -307,13 +307,13 @@
 		goto out;
 	}
 
-	/* Always allocate at least 128*4 bytes (2 slots) */
-	if (slots < 2)
-		slots = 2;
-
 	/* For the MEM_BG channel, first try to allocate twice the slots */
 	if (dmfc->data->ipu_channel == IPUV3_CHANNEL_MEM_BG_SYNC)
 		segment = dmfc_find_slots(priv, slots * 2);
+	else if (slots < 2)
+		/* Always allocate at least 128*4 bytes (2 slots) */
+		slots = 2;
+
 	if (segment >= 0)
 		slots *= 2;
 	else
diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-dp.c b/drivers/staging/imx-drm/ipu-v3/ipu-dp.c
index 231afd6..58f87c8 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-dp.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-dp.c
@@ -325,7 +325,7 @@
 	mutex_init(&priv->mutex);
 
 	for (i = 0; i < IPUV3_NUM_FLOWS; i++) {
-		priv->flow[i].foreground.foreground = 1;
+		priv->flow[i].foreground.foreground = true;
 		priv->flow[i].base = priv->base + ipu_dp_flow_base[i];
 		priv->flow[i].priv = priv;
 	}
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index 6fd37a7..670a56a 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -25,29 +25,25 @@
 #include <drm/drm_crtc_helper.h>
 #include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/errno.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 
 #include "ipu-v3/imx-ipu-v3.h"
 #include "imx-drm.h"
+#include "ipuv3-plane.h"
 
 #define DRIVER_DESC		"i.MX IPUv3 Graphics"
 
-struct ipu_framebuffer {
-	struct drm_framebuffer	base;
-	void			*virt;
-	dma_addr_t		phys;
-	size_t			len;
-};
-
 struct ipu_crtc {
 	struct device		*dev;
 	struct drm_crtc		base;
 	struct imx_drm_crtc	*imx_crtc;
-	struct ipuv3_channel	*ipu_ch;
+
+	/* plane[0] is the full plane, plane[1] is the partial plane */
+	struct ipu_plane	*plane[2];
+
 	struct ipu_dc		*dc;
-	struct ipu_dp		*dp;
-	struct dmfc_channel	*dmfc;
 	struct ipu_di		*di;
 	int			enabled;
 	struct drm_pending_vblank_event *page_flip_event;
@@ -61,35 +57,14 @@
 
 #define to_ipu_crtc(x) container_of(x, struct ipu_crtc, base)
 
-static int calc_vref(struct drm_display_mode *mode)
-{
-	unsigned long htotal, vtotal;
-
-	htotal = mode->htotal;
-	vtotal = mode->vtotal;
-
-	if (!htotal || !vtotal)
-		return 60;
-
-	return mode->clock * 1000 / vtotal / htotal;
-}
-
-static int calc_bandwidth(struct drm_display_mode *mode, unsigned int vref)
-{
-	return mode->hdisplay * mode->vdisplay * vref;
-}
-
 static void ipu_fb_enable(struct ipu_crtc *ipu_crtc)
 {
 	if (ipu_crtc->enabled)
 		return;
 
 	ipu_di_enable(ipu_crtc->di);
-	ipu_dmfc_enable_channel(ipu_crtc->dmfc);
-	ipu_idmac_enable_channel(ipu_crtc->ipu_ch);
 	ipu_dc_enable_channel(ipu_crtc->dc);
-	if (ipu_crtc->dp)
-		ipu_dp_enable_channel(ipu_crtc->dp);
+	ipu_plane_enable(ipu_crtc->plane[0]);
 
 	ipu_crtc->enabled = 1;
 }
@@ -99,11 +74,8 @@
 	if (!ipu_crtc->enabled)
 		return;
 
-	if (ipu_crtc->dp)
-		ipu_dp_disable_channel(ipu_crtc->dp);
+	ipu_plane_disable(ipu_crtc->plane[0]);
 	ipu_dc_disable_channel(ipu_crtc->dc);
-	ipu_idmac_disable_channel(ipu_crtc->ipu_ch);
-	ipu_dmfc_disable_channel(ipu_crtc->dmfc);
 	ipu_di_disable(ipu_crtc->di);
 
 	ipu_crtc->enabled = 0;
@@ -159,33 +131,6 @@
 	.page_flip = ipu_page_flip,
 };
 
-static int ipu_drm_set_base(struct drm_crtc *crtc, int x, int y)
-{
-	struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
-	struct drm_gem_cma_object *cma_obj;
-	struct drm_framebuffer *fb = crtc->fb;
-	unsigned long phys;
-
-	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
-	if (!cma_obj) {
-		DRM_LOG_KMS("entry is null.\n");
-		return -EFAULT;
-	}
-
-	phys = cma_obj->paddr;
-	phys += x * (fb->bits_per_pixel >> 3);
-	phys += y * fb->pitches[0];
-
-	dev_dbg(ipu_crtc->dev, "%s: phys: 0x%lx\n", __func__, phys);
-	dev_dbg(ipu_crtc->dev, "%s: xy: %dx%d\n", __func__, x, y);
-
-	ipu_cpmem_set_stride(ipu_get_cpmem(ipu_crtc->ipu_ch), fb->pitches[0]);
-	ipu_cpmem_set_buffer(ipu_get_cpmem(ipu_crtc->ipu_ch),
-			  0, phys);
-
-	return 0;
-}
-
 static int ipu_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *orig_mode,
 			       struct drm_display_mode *mode,
@@ -193,41 +138,15 @@
 			       struct drm_framebuffer *old_fb)
 {
 	struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
-	struct drm_framebuffer *fb = ipu_crtc->base.fb;
 	int ret;
 	struct ipu_di_signal_cfg sig_cfg = {};
 	u32 out_pixel_fmt;
-	struct ipu_ch_param __iomem *cpmem = ipu_get_cpmem(ipu_crtc->ipu_ch);
-	int bpp;
-	u32 v4l2_fmt;
 
 	dev_dbg(ipu_crtc->dev, "%s: mode->hdisplay: %d\n", __func__,
 			mode->hdisplay);
 	dev_dbg(ipu_crtc->dev, "%s: mode->vdisplay: %d\n", __func__,
 			mode->vdisplay);
 
-	ipu_ch_param_zero(cpmem);
-
-	switch (fb->pixel_format) {
-	case DRM_FORMAT_XRGB8888:
-	case DRM_FORMAT_ARGB8888:
-		v4l2_fmt = V4L2_PIX_FMT_RGB32;
-		bpp = 32;
-		break;
-	case DRM_FORMAT_RGB565:
-		v4l2_fmt = V4L2_PIX_FMT_RGB565;
-		bpp = 16;
-		break;
-	case DRM_FORMAT_RGB888:
-		v4l2_fmt = V4L2_PIX_FMT_RGB24;
-		bpp = 24;
-		break;
-	default:
-		dev_err(ipu_crtc->dev, "unsupported pixel format 0x%08x\n",
-				fb->pixel_format);
-		return -EINVAL;
-	}
-
 	out_pixel_fmt = ipu_crtc->interface_pix_fmt;
 
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
@@ -238,7 +157,7 @@
 		sig_cfg.Vsync_pol = 1;
 
 	sig_cfg.enable_pol = 1;
-	sig_cfg.clk_pol = 0;
+	sig_cfg.clk_pol = 1;
 	sig_cfg.width = mode->hdisplay;
 	sig_cfg.height = mode->vdisplay;
 	sig_cfg.pixel_fmt = out_pixel_fmt;
@@ -257,18 +176,6 @@
 	sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin;
 	sig_cfg.vsync_pin = ipu_crtc->di_vsync_pin;
 
-	if (ipu_crtc->dp) {
-		ret = ipu_dp_setup_channel(ipu_crtc->dp, IPUV3_COLORSPACE_RGB,
-				IPUV3_COLORSPACE_RGB);
-		if (ret) {
-			dev_err(ipu_crtc->dev,
-				"initializing display processor failed with %d\n",
-				ret);
-			return ret;
-		}
-		ipu_dp_set_global_alpha(ipu_crtc->dp, 1, 0, 1);
-	}
-
 	ret = ipu_dc_init_sync(ipu_crtc->dc, ipu_crtc->di, sig_cfg.interlaced,
 			out_pixel_fmt, mode->hdisplay);
 	if (ret) {
@@ -285,30 +192,9 @@
 		return ret;
 	}
 
-	ipu_cpmem_set_resolution(cpmem, mode->hdisplay, mode->vdisplay);
-	ipu_cpmem_set_fmt(cpmem, v4l2_fmt);
-	ipu_cpmem_set_high_priority(ipu_crtc->ipu_ch);
-
-	ret = ipu_dmfc_init_channel(ipu_crtc->dmfc, mode->hdisplay);
-	if (ret) {
-		dev_err(ipu_crtc->dev,
-				"initializing dmfc channel failed with %d\n",
-				ret);
-		return ret;
-	}
-
-	ret = ipu_dmfc_alloc_bandwidth(ipu_crtc->dmfc,
-			calc_bandwidth(mode, calc_vref(mode)), 64);
-	if (ret) {
-		dev_err(ipu_crtc->dev,
-				"allocating dmfc bandwidth failed with %d\n",
-				ret);
-		return ret;
-	}
-
-	ipu_drm_set_base(crtc, x, y);
-
-	return 0;
+	return ipu_plane_mode_set(ipu_crtc->plane[0], crtc, mode, crtc->fb,
+				  0, 0, mode->hdisplay, mode->vdisplay,
+				  x, y, mode->hdisplay, mode->vdisplay);
 }
 
 static void ipu_crtc_handle_pageflip(struct ipu_crtc *ipu_crtc)
@@ -332,7 +218,7 @@
 
 	if (ipu_crtc->newfb) {
 		ipu_crtc->newfb = NULL;
-		ipu_drm_set_base(&ipu_crtc->base, 0, 0);
+		ipu_plane_set_base(ipu_crtc->plane[0], ipu_crtc->base.fb, 0, 0);
 		ipu_crtc_handle_pageflip(ipu_crtc);
 	}
 
@@ -370,10 +256,6 @@
 
 static int ipu_enable_vblank(struct drm_crtc *crtc)
 {
-	struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
-
-	enable_irq(ipu_crtc->irq);
-
 	return 0;
 }
 
@@ -381,7 +263,8 @@
 {
 	struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
 
-	disable_irq(ipu_crtc->irq);
+	ipu_crtc->page_flip_event = NULL;
+	ipu_crtc->newfb = NULL;
 }
 
 static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc, u32 encoder_type,
@@ -418,12 +301,8 @@
 
 static void ipu_put_resources(struct ipu_crtc *ipu_crtc)
 {
-	if (!IS_ERR_OR_NULL(ipu_crtc->ipu_ch))
-		ipu_idmac_put(ipu_crtc->ipu_ch);
-	if (!IS_ERR_OR_NULL(ipu_crtc->dmfc))
-		ipu_dmfc_put(ipu_crtc->dmfc);
-	if (!IS_ERR_OR_NULL(ipu_crtc->dp))
-		ipu_dp_put(ipu_crtc->dp);
+	if (!IS_ERR_OR_NULL(ipu_crtc->dc))
+		ipu_dc_put(ipu_crtc->dc);
 	if (!IS_ERR_OR_NULL(ipu_crtc->di))
 		ipu_di_put(ipu_crtc->di);
 }
@@ -434,32 +313,12 @@
 	struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
 	int ret;
 
-	ipu_crtc->ipu_ch = ipu_idmac_get(ipu, pdata->dma[0]);
-	if (IS_ERR(ipu_crtc->ipu_ch)) {
-		ret = PTR_ERR(ipu_crtc->ipu_ch);
-		goto err_out;
-	}
-
 	ipu_crtc->dc = ipu_dc_get(ipu, pdata->dc);
 	if (IS_ERR(ipu_crtc->dc)) {
 		ret = PTR_ERR(ipu_crtc->dc);
 		goto err_out;
 	}
 
-	ipu_crtc->dmfc = ipu_dmfc_get(ipu, pdata->dma[0]);
-	if (IS_ERR(ipu_crtc->dmfc)) {
-		ret = PTR_ERR(ipu_crtc->dmfc);
-		goto err_out;
-	}
-
-	if (pdata->dp >= 0) {
-		ipu_crtc->dp = ipu_dp_get(ipu, pdata->dp);
-		if (IS_ERR(ipu_crtc->dp)) {
-			ret = PTR_ERR(ipu_crtc->dp);
-			goto err_out;
-		}
-	}
-
 	ipu_crtc->di = ipu_di_get(ipu, pdata->di);
 	if (IS_ERR(ipu_crtc->di)) {
 		ret = PTR_ERR(ipu_crtc->di);
@@ -477,7 +336,9 @@
 		struct ipu_client_platformdata *pdata)
 {
 	struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
+	int dp = -EINVAL;
 	int ret;
+	int id;
 
 	ret = ipu_get_resources(ipu_crtc, pdata);
 	if (ret) {
@@ -495,19 +356,42 @@
 		goto err_put_resources;
 	}
 
-	ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
-			IPU_IRQ_EOF);
+	if (pdata->dp >= 0)
+		dp = IPU_DP_FLOW_SYNC_BG;
+	id = imx_drm_crtc_id(ipu_crtc->imx_crtc);
+	ipu_crtc->plane[0] = ipu_plane_init(ipu_crtc->base.dev, ipu,
+					    pdata->dma[0], dp, BIT(id), true);
+	ret = ipu_plane_get_resources(ipu_crtc->plane[0]);
+	if (ret) {
+		dev_err(ipu_crtc->dev, "getting plane 0 resources failed with %d.\n",
+			ret);
+		goto err_remove_crtc;
+	}
+
+	/* If this crtc is using the DP, add an overlay plane */
+	if (pdata->dp >= 0 && pdata->dma[1] > 0) {
+		ipu_crtc->plane[1] = ipu_plane_init(ipu_crtc->base.dev, ipu,
+						    pdata->dma[1],
+						    IPU_DP_FLOW_SYNC_FG,
+						    BIT(id), false);
+		if (IS_ERR(ipu_crtc->plane[1]))
+			ipu_crtc->plane[1] = NULL;
+	}
+
+	ipu_crtc->irq = ipu_plane_irq(ipu_crtc->plane[0]);
 	ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
 			"imx_drm", ipu_crtc);
 	if (ret < 0) {
 		dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
-		goto err_put_resources;
+		goto err_put_plane_res;
 	}
 
-	disable_irq(ipu_crtc->irq);
-
 	return 0;
 
+err_put_plane_res:
+	ipu_plane_put_resources(ipu_crtc->plane[0]);
+err_remove_crtc:
+	imx_drm_remove_crtc(ipu_crtc->imx_crtc);
 err_put_resources:
 	ipu_put_resources(ipu_crtc);
 
@@ -546,6 +430,7 @@
 
 	imx_drm_remove_crtc(ipu_crtc->imx_crtc);
 
+	ipu_plane_put_resources(ipu_crtc->plane[0]);
 	ipu_put_resources(ipu_crtc);
 
 	return 0;
diff --git a/drivers/staging/imx-drm/ipuv3-plane.c b/drivers/staging/imx-drm/ipuv3-plane.c
new file mode 100644
index 0000000..d97454a
--- /dev/null
+++ b/drivers/staging/imx-drm/ipuv3-plane.c
@@ -0,0 +1,375 @@
+/*
+ * i.MX IPUv3 DP Overlay Planes
+ *
+ * Copyright (C) 2013 Philipp Zabel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+
+#include "ipu-v3/imx-ipu-v3.h"
+#include "ipuv3-plane.h"
+
+#define to_ipu_plane(x)	container_of(x, struct ipu_plane, base)
+
+static const uint32_t ipu_plane_formats[] = {
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_XBGR1555,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YVU420,
+};
+
+int ipu_plane_irq(struct ipu_plane *ipu_plane)
+{
+	return ipu_idmac_channel_irq(ipu_plane->ipu, ipu_plane->ipu_ch,
+				     IPU_IRQ_EOF);
+}
+
+static int calc_vref(struct drm_display_mode *mode)
+{
+	unsigned long htotal, vtotal;
+
+	htotal = mode->htotal;
+	vtotal = mode->vtotal;
+
+	if (!htotal || !vtotal)
+		return 60;
+
+	return DIV_ROUND_UP(mode->clock * 1000, vtotal * htotal);
+}
+
+static inline int calc_bandwidth(int width, int height, unsigned int vref)
+{
+	return width * height * vref;
+}
+
+int ipu_plane_set_base(struct ipu_plane *ipu_plane, struct drm_framebuffer *fb,
+		       int x, int y)
+{
+	struct ipu_ch_param __iomem *cpmem;
+	struct drm_gem_cma_object *cma_obj;
+
+	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+	if (!cma_obj) {
+		DRM_LOG_KMS("entry is null.\n");
+		return -EFAULT;
+	}
+
+	dev_dbg(ipu_plane->base.dev->dev, "phys = 0x%x, x = %d, y = %d",
+		cma_obj->paddr, x, y);
+
+	cpmem = ipu_get_cpmem(ipu_plane->ipu_ch);
+	ipu_cpmem_set_stride(cpmem, fb->pitches[0]);
+	ipu_cpmem_set_buffer(cpmem, 0, cma_obj->paddr + fb->offsets[0] +
+			     fb->pitches[0] * y + x);
+
+	return 0;
+}
+
+int ipu_plane_mode_set(struct ipu_plane *ipu_plane, struct drm_crtc *crtc,
+		       struct drm_display_mode *mode,
+		       struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+		       unsigned int crtc_w, unsigned int crtc_h,
+		       uint32_t src_x, uint32_t src_y,
+		       uint32_t src_w, uint32_t src_h)
+{
+	struct ipu_ch_param __iomem *cpmem;
+	struct device *dev = ipu_plane->base.dev->dev;
+	int ret;
+
+	/* no scaling */
+	if (src_w != crtc_w || src_h != crtc_h)
+		return -EINVAL;
+
+	/* clip to crtc bounds */
+	if (crtc_x < 0) {
+		if (-crtc_x > crtc_w)
+			return -EINVAL;
+		src_x += -crtc_x;
+		src_w -= -crtc_x;
+		crtc_w -= -crtc_x;
+		crtc_x = 0;
+	}
+	if (crtc_y < 0) {
+		if (-crtc_y > crtc_h)
+			return -EINVAL;
+		src_y += -crtc_y;
+		src_h -= -crtc_y;
+		crtc_h -= -crtc_y;
+		crtc_y = 0;
+	}
+	if (crtc_x + crtc_w > mode->hdisplay) {
+		if (crtc_x > mode->hdisplay)
+			return -EINVAL;
+		crtc_w = mode->hdisplay - crtc_x;
+		src_w = crtc_w;
+	}
+	if (crtc_y + crtc_h > mode->vdisplay) {
+		if (crtc_y > mode->vdisplay)
+			return -EINVAL;
+		crtc_h = mode->vdisplay - crtc_y;
+		src_h = crtc_h;
+	}
+	/* full plane minimum width is 13 pixels */
+	if (crtc_w < 13 && (ipu_plane->dp_flow != IPU_DP_FLOW_SYNC_FG))
+		return -EINVAL;
+	if (crtc_h < 2)
+		return -EINVAL;
+
+	switch (ipu_plane->dp_flow) {
+	case IPU_DP_FLOW_SYNC_BG:
+		ret = ipu_dp_setup_channel(ipu_plane->dp,
+				IPUV3_COLORSPACE_RGB,
+				IPUV3_COLORSPACE_RGB);
+		if (ret) {
+			dev_err(dev,
+				"initializing display processor failed with %d\n",
+				ret);
+			return ret;
+		}
+		ipu_dp_set_global_alpha(ipu_plane->dp, 1, 0, 1);
+		break;
+	case IPU_DP_FLOW_SYNC_FG:
+		ipu_dp_setup_channel(ipu_plane->dp,
+				ipu_drm_fourcc_to_colorspace(fb->pixel_format),
+				IPUV3_COLORSPACE_UNKNOWN);
+		ipu_dp_set_window_pos(ipu_plane->dp, crtc_x, crtc_y);
+		break;
+	}
+
+	ret = ipu_dmfc_init_channel(ipu_plane->dmfc, crtc_w);
+	if (ret) {
+		dev_err(dev, "initializing dmfc channel failed with %d\n", ret);
+		return ret;
+	}
+
+	ret = ipu_dmfc_alloc_bandwidth(ipu_plane->dmfc,
+			calc_bandwidth(crtc_w, crtc_h,
+				       calc_vref(mode)), 64);
+	if (ret) {
+		dev_err(dev, "allocating dmfc bandwidth failed with %d\n", ret);
+		return ret;
+	}
+
+	cpmem = ipu_get_cpmem(ipu_plane->ipu_ch);
+	ipu_ch_param_zero(cpmem);
+	ipu_cpmem_set_resolution(cpmem, src_w, src_h);
+	ret = ipu_cpmem_set_fmt(cpmem, fb->pixel_format);
+	if (ret < 0) {
+		dev_err(dev, "unsupported pixel format 0x%08x\n",
+			fb->pixel_format);
+		return ret;
+	}
+	ipu_cpmem_set_high_priority(ipu_plane->ipu_ch);
+
+	ret = ipu_plane_set_base(ipu_plane, fb, src_x, src_y);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void ipu_plane_put_resources(struct ipu_plane *ipu_plane)
+{
+	if (!IS_ERR_OR_NULL(ipu_plane->dp))
+		ipu_dp_put(ipu_plane->dp);
+	if (!IS_ERR_OR_NULL(ipu_plane->dmfc))
+		ipu_dmfc_put(ipu_plane->dmfc);
+	if (!IS_ERR_OR_NULL(ipu_plane->ipu_ch))
+		ipu_idmac_put(ipu_plane->ipu_ch);
+}
+
+int ipu_plane_get_resources(struct ipu_plane *ipu_plane)
+{
+	int ret;
+
+	ipu_plane->ipu_ch = ipu_idmac_get(ipu_plane->ipu, ipu_plane->dma);
+	if (IS_ERR(ipu_plane->ipu_ch)) {
+		ret = PTR_ERR(ipu_plane->ipu_ch);
+		DRM_ERROR("failed to get idmac channel: %d\n", ret);
+		return ret;
+	}
+
+	ipu_plane->dmfc = ipu_dmfc_get(ipu_plane->ipu, ipu_plane->dma);
+	if (IS_ERR(ipu_plane->dmfc)) {
+		ret = PTR_ERR(ipu_plane->dmfc);
+		DRM_ERROR("failed to get dmfc: ret %d\n", ret);
+		goto err_out;
+	}
+
+	if (ipu_plane->dp_flow >= 0) {
+		ipu_plane->dp = ipu_dp_get(ipu_plane->ipu, ipu_plane->dp_flow);
+		if (IS_ERR(ipu_plane->dp)) {
+			ret = PTR_ERR(ipu_plane->dp);
+			DRM_ERROR("failed to get dp flow: %d\n", ret);
+			goto err_out;
+		}
+	}
+
+	return 0;
+err_out:
+	ipu_plane_put_resources(ipu_plane);
+
+	return ret;
+}
+
+void ipu_plane_enable(struct ipu_plane *ipu_plane)
+{
+	ipu_dmfc_enable_channel(ipu_plane->dmfc);
+	ipu_idmac_enable_channel(ipu_plane->ipu_ch);
+	if (ipu_plane->dp)
+		ipu_dp_enable_channel(ipu_plane->dp);
+
+	ipu_plane->enabled = true;
+}
+
+void ipu_plane_disable(struct ipu_plane *ipu_plane)
+{
+	ipu_plane->enabled = false;
+
+	ipu_idmac_wait_busy(ipu_plane->ipu_ch, 50);
+
+	if (ipu_plane->dp)
+		ipu_dp_disable_channel(ipu_plane->dp);
+	ipu_idmac_disable_channel(ipu_plane->ipu_ch);
+	ipu_dmfc_disable_channel(ipu_plane->dmfc);
+}
+
+static void ipu_plane_dpms(struct ipu_plane *ipu_plane, int mode)
+{
+	bool enable;
+
+	DRM_DEBUG_KMS("mode = %d", mode);
+
+	enable = (mode == DRM_MODE_DPMS_ON);
+
+	if (enable == ipu_plane->enabled)
+		return;
+
+	if (enable) {
+		ipu_plane_enable(ipu_plane);
+	} else {
+		ipu_plane_disable(ipu_plane);
+
+		ipu_idmac_put(ipu_plane->ipu_ch);
+		ipu_dmfc_put(ipu_plane->dmfc);
+		ipu_dp_put(ipu_plane->dp);
+	}
+}
+
+/*
+ * drm_plane API
+ */
+
+static int ipu_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
+			    struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+			    unsigned int crtc_w, unsigned int crtc_h,
+			    uint32_t src_x, uint32_t src_y,
+			    uint32_t src_w, uint32_t src_h)
+{
+	struct ipu_plane *ipu_plane = to_ipu_plane(plane);
+	int ret = 0;
+
+	DRM_DEBUG_KMS("plane - %p\n", plane);
+
+	if (!ipu_plane->enabled)
+		ret = ipu_plane_get_resources(ipu_plane);
+	if (ret < 0)
+		return ret;
+
+	ret = ipu_plane_mode_set(ipu_plane, crtc, &crtc->hwmode, fb,
+			crtc_x, crtc_y, crtc_w, crtc_h,
+			src_x >> 16, src_y >> 16, src_w >> 16, src_h >> 16);
+	if (ret < 0) {
+		ipu_plane_put_resources(ipu_plane);
+		return ret;
+	}
+
+	if (crtc != plane->crtc)
+		dev_info(plane->dev->dev, "crtc change: %p -> %p\n",
+				plane->crtc, crtc);
+	plane->crtc = crtc;
+
+	ipu_plane_dpms(ipu_plane, DRM_MODE_DPMS_ON);
+
+	return 0;
+}
+
+static int ipu_disable_plane(struct drm_plane *plane)
+{
+	struct ipu_plane *ipu_plane = to_ipu_plane(plane);
+
+	DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
+
+	ipu_plane_dpms(ipu_plane, DRM_MODE_DPMS_OFF);
+
+	ipu_plane_put_resources(ipu_plane);
+
+	return 0;
+}
+
+static void ipu_plane_destroy(struct drm_plane *plane)
+{
+	struct ipu_plane *ipu_plane = to_ipu_plane(plane);
+
+	DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
+
+	ipu_disable_plane(plane);
+	drm_plane_cleanup(plane);
+	kfree(ipu_plane);
+}
+
+static struct drm_plane_funcs ipu_plane_funcs = {
+	.update_plane	= ipu_update_plane,
+	.disable_plane	= ipu_disable_plane,
+	.destroy	= ipu_plane_destroy,
+};
+
+struct ipu_plane *ipu_plane_init(struct drm_device *dev, struct ipu_soc *ipu,
+				 int dma, int dp, unsigned int possible_crtcs,
+				 bool priv)
+{
+	struct ipu_plane *ipu_plane;
+	int ret;
+
+	DRM_DEBUG_KMS("channel %d, dp flow %d, possible_crtcs=0x%x\n",
+		      dma, dp, possible_crtcs);
+
+	ipu_plane = kzalloc(sizeof(*ipu_plane), GFP_KERNEL);
+	if (!ipu_plane) {
+		DRM_ERROR("failed to allocate plane\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ipu_plane->ipu = ipu;
+	ipu_plane->dma = dma;
+	ipu_plane->dp_flow = dp;
+
+	ret = drm_plane_init(dev, &ipu_plane->base, possible_crtcs,
+			     &ipu_plane_funcs, ipu_plane_formats,
+			     ARRAY_SIZE(ipu_plane_formats),
+			     priv);
+	if (ret) {
+		DRM_ERROR("failed to initialize plane\n");
+		kfree(ipu_plane);
+		return ERR_PTR(ret);
+	}
+
+	return ipu_plane;
+}
diff --git a/drivers/staging/imx-drm/ipuv3-plane.h b/drivers/staging/imx-drm/ipuv3-plane.h
new file mode 100644
index 0000000..c0aae5b
--- /dev/null
+++ b/drivers/staging/imx-drm/ipuv3-plane.h
@@ -0,0 +1,55 @@
+#ifndef __IPUV3_PLANE_H__
+#define __IPUV3_PLANE_H__
+
+#include <drm/drm_crtc.h> /* drm_plane */
+
+struct drm_plane;
+struct drm_device;
+struct ipu_soc;
+struct drm_crtc;
+struct drm_framebuffer;
+
+struct ipuv3_channel;
+struct dmfc_channel;
+struct ipu_dp;
+
+struct ipu_plane {
+	struct drm_plane	base;
+
+	struct ipu_soc		*ipu;
+	struct ipuv3_channel	*ipu_ch;
+	struct dmfc_channel	*dmfc;
+	struct ipu_dp		*dp;
+
+	int			dma;
+	int			dp_flow;
+
+	int			x;
+	int			y;
+
+	bool			enabled;
+};
+
+struct ipu_plane *ipu_plane_init(struct drm_device *dev, struct ipu_soc *ipu,
+				 int dma, int dp, unsigned int possible_crtcs,
+				 bool priv);
+
+/* Init IDMAC, DMFC, DP */
+int ipu_plane_mode_set(struct ipu_plane *plane, struct drm_crtc *crtc,
+		       struct drm_display_mode *mode,
+		       struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+		       unsigned int crtc_w, unsigned int crtc_h,
+		       uint32_t src_x, uint32_t src_y, uint32_t src_w,
+		       uint32_t src_h);
+
+void ipu_plane_enable(struct ipu_plane *plane);
+void ipu_plane_disable(struct ipu_plane *plane);
+int ipu_plane_set_base(struct ipu_plane *plane, struct drm_framebuffer *fb,
+		       int x, int y);
+
+int ipu_plane_get_resources(struct ipu_plane *plane);
+void ipu_plane_put_resources(struct ipu_plane *plane);
+
+int ipu_plane_irq(struct ipu_plane *plane);
+
+#endif
diff --git a/drivers/staging/keucr/usb.c b/drivers/staging/keucr/usb.c
index ddd2e73..a84ee63 100644
--- a/drivers/staging/keucr/usb.c
+++ b/drivers/staging/keucr/usb.c
@@ -604,9 +604,7 @@
 	if (!(MiscReg03 & 0x02)) {
 		result = -ENODEV;
 		quiesce_and_remove_host(us);
-		pr_info("keucr: The driver only supports SM/MS card. "
-			"To use SD card, "
-			"please build driver/usb/storage/ums-eneub6250.ko\n");
+		pr_info("keucr: The driver only supports SM/MS card. To use SD card, please build driver/usb/storage/ums-eneub6250.ko\n");
 		goto BadDevice;
 	}
 
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index 471c10c..cc5d62d 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -205,7 +205,7 @@
 			__func__, retval);
 		usb_free_urb(urb);
 		kfree(msg);
-		return -EINVAL;
+		return retval;
 	}
 
 	return 0;
@@ -340,7 +340,7 @@
 		line6->message_length = done;
 		line6_midi_receive(line6, line6->buffer_message, done);
 
-		switch (line6->usbdev->descriptor.idProduct) {
+		switch (le16_to_cpu(line6->usbdev->descriptor.idProduct)) {
 		case LINE6_DEVID_BASSPODXT:
 		case LINE6_DEVID_BASSPODXTLIVE:
 		case LINE6_DEVID_BASSPODXTPRO:
@@ -1010,7 +1010,7 @@
 			dev_err(line6->ifcdev,
 				"driver bug: inconsistent usb device\n");
 
-		switch (line6->usbdev->descriptor.idProduct) {
+		switch (le16_to_cpu(line6->usbdev->descriptor.idProduct)) {
 		case LINE6_DEVID_BASSPODXT:
 		case LINE6_DEVID_BASSPODXTLIVE:
 		case LINE6_DEVID_BASSPODXTPRO:
@@ -1114,7 +1114,7 @@
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
 
-	switch (line6->usbdev->descriptor.idProduct) {
+	switch (le16_to_cpu(line6->usbdev->descriptor.idProduct)) {
 	case LINE6_DEVID_PODSTUDIO_GX:
 	case LINE6_DEVID_PODSTUDIO_UX1:
 	case LINE6_DEVID_PODSTUDIO_UX2:
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c
index e3f9a53..3f6d78c 100644
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -144,7 +144,7 @@
 	if (retval < 0) {
 		dev_err(line6->ifcdev, "usb_submit_urb failed\n");
 		usb_free_urb(urb);
-		return -EINVAL;
+		return retval;
 	}
 
 	++line6->line6midi->num_active_send_urbs;
@@ -205,7 +205,7 @@
 	if (up)
 		line6->line6midi->substream_receive = substream;
 	else
-		line6->line6midi->substream_receive = 0;
+		line6->line6midi->substream_receive = NULL;
 }
 
 static struct snd_rawmidi_ops line6_midi_output_ops = {
diff --git a/drivers/staging/line6/playback.c b/drivers/staging/line6/playback.c
index f9135c7..41869ca 100644
--- a/drivers/staging/line6/playback.c
+++ b/drivers/staging/line6/playback.c
@@ -242,13 +242,14 @@
 		if (line6pcm->flags & LINE6_BITS_PCM_IMPULSE) {
 			create_impulse_test_signal(line6pcm, urb_out,
 						   bytes_per_frame);
-			if (line6pcm->flags & LINE6_BIT_PCM_ALSA_CAPTURE_STREAM) {
+			if (line6pcm->flags &
+			    LINE6_BIT_PCM_ALSA_CAPTURE_STREAM) {
 				line6_capture_copy(line6pcm,
 						   urb_out->transfer_buffer,
 						   urb_out->
 						   transfer_buffer_length);
 				line6_capture_check_period(line6pcm,
-							   urb_out->transfer_buffer_length);
+					urb_out->transfer_buffer_length);
 			}
 		} else {
 #endif
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c
index 776d363..af2e7e5 100644
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -307,6 +307,7 @@
 	int ticks;
 	struct usb_line6 *line6 = &toneport->line6;
 	struct usb_device *usbdev = line6->usbdev;
+	u16 idProduct = le16_to_cpu(usbdev->descriptor.idProduct);
 
 	/* sync time on device with host: */
 	ticks = (int)get_seconds();
@@ -316,7 +317,7 @@
 	toneport_send_cmd(usbdev, 0x0301, 0x0000);
 
 	/* initialize source select: */
-	switch (usbdev->descriptor.idProduct) {
+	switch (le16_to_cpu(usbdev->descriptor.idProduct)) {
 	case LINE6_DEVID_TONEPORT_UX1:
 	case LINE6_DEVID_TONEPORT_UX2:
 	case LINE6_DEVID_PODSTUDIO_UX1:
@@ -326,7 +327,7 @@
 				  0x0000);
 	}
 
-	if (toneport_has_led(usbdev->descriptor.idProduct))
+	if (toneport_has_led(idProduct))
 		toneport_update_led(&usbdev->dev);
 }
 
@@ -339,6 +340,7 @@
 	int err;
 	struct usb_line6 *line6 = &toneport->line6;
 	struct usb_device *usbdev = line6->usbdev;
+	u16 idProduct = le16_to_cpu(usbdev->descriptor.idProduct);
 
 	if ((interface == NULL) || (toneport == NULL))
 		return -ENODEV;
@@ -361,7 +363,7 @@
 		return err;
 
 	/* register source select control: */
-	switch (usbdev->descriptor.idProduct) {
+	switch (le16_to_cpu(usbdev->descriptor.idProduct)) {
 	case LINE6_DEVID_TONEPORT_UX1:
 	case LINE6_DEVID_TONEPORT_UX2:
 	case LINE6_DEVID_PODSTUDIO_UX1:
@@ -382,7 +384,7 @@
 	line6_read_serial_number(line6, &toneport->serial_number);
 	line6_read_data(line6, 0x80c2, &toneport->firmware_version, 1);
 
-	if (toneport_has_led(usbdev->descriptor.idProduct)) {
+	if (toneport_has_led(idProduct)) {
 		CHECK_RETURN(device_create_file
 			     (&interface->dev, &dev_attr_led_red));
 		CHECK_RETURN(device_create_file
@@ -428,14 +430,16 @@
 void line6_toneport_disconnect(struct usb_interface *interface)
 {
 	struct usb_line6_toneport *toneport;
+	u16 idProduct;
 
 	if (interface == NULL)
 		return;
 
 	toneport = usb_get_intfdata(interface);
 	del_timer_sync(&toneport->timer);
+	idProduct = le16_to_cpu(toneport->line6.usbdev->descriptor.idProduct);
 
-	if (toneport_has_led(toneport->line6.usbdev->descriptor.idProduct)) {
+	if (toneport_has_led(idProduct)) {
 		device_remove_file(&interface->dev, &dev_attr_led_red);
 		device_remove_file(&interface->dev, &dev_attr_led_green);
 	}
diff --git a/drivers/staging/lustre/include/linux/libcfs/bitmap.h b/drivers/staging/lustre/include/linux/libcfs/bitmap.h
index f3d4a89..8b13789 100644
--- a/drivers/staging/lustre/include/linux/libcfs/bitmap.h
+++ b/drivers/staging/lustre/include/linux/libcfs/bitmap.h
@@ -1,111 +1 @@
-/*
- * GPL HEADER START
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 only,
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License version 2 for more details (a copy is included
- * in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU General Public License
- * version 2 along with this program; If not, see
- * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
- *
- * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
- * CA 95054 USA or visit www.sun.com if you need additional information or
- * have any questions.
- *
- * GPL HEADER END
- */
-/*
- * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
- * Use is subject to license terms.
- *
- * Copyright (c) 2012, Intel Corporation.
- */
-/*
- * This file is part of Lustre, http://www.lustre.org/
- * Lustre is a trademark of Sun Microsystems, Inc.
- */
-#ifndef _LIBCFS_BITMAP_H_
-#define _LIBCFS_BITMAP_H_
 
-
-typedef struct {
-	int	     size;
-	unsigned long   data[0];
-} cfs_bitmap_t;
-
-#define CFS_BITMAP_SIZE(nbits) \
-     (((nbits/BITS_PER_LONG)+1)*sizeof(long)+sizeof(cfs_bitmap_t))
-
-static inline
-cfs_bitmap_t *CFS_ALLOCATE_BITMAP(int size)
-{
-	cfs_bitmap_t *ptr;
-
-	OBD_ALLOC(ptr, CFS_BITMAP_SIZE(size));
-	if (ptr == NULL)
-		return ptr;
-
-	ptr->size = size;
-
-	return ptr;
-}
-
-#define CFS_FREE_BITMAP(ptr)	OBD_FREE(ptr, CFS_BITMAP_SIZE(ptr->size))
-
-static inline
-void cfs_bitmap_set(cfs_bitmap_t *bitmap, int nbit)
-{
-	set_bit(nbit, bitmap->data);
-}
-
-static inline
-void cfs_bitmap_clear(cfs_bitmap_t *bitmap, int nbit)
-{
-	test_and_clear_bit(nbit, bitmap->data);
-}
-
-static inline
-int cfs_bitmap_check(cfs_bitmap_t *bitmap, int nbit)
-{
-	return test_bit(nbit, bitmap->data);
-}
-
-static inline
-int cfs_bitmap_test_and_clear(cfs_bitmap_t *bitmap, int nbit)
-{
-	return test_and_clear_bit(nbit, bitmap->data);
-}
-
-/* return 0 is bitmap has none set bits */
-static inline
-int cfs_bitmap_check_empty(cfs_bitmap_t *bitmap)
-{
-	return find_first_bit(bitmap->data, bitmap->size) == bitmap->size;
-}
-
-static inline
-void cfs_bitmap_copy(cfs_bitmap_t *new, cfs_bitmap_t *old)
-{
-	int newsize;
-
-	LASSERT(new->size >= old->size);
-	newsize = new->size;
-	memcpy(new, old, CFS_BITMAP_SIZE(old->size));
-	new->size = newsize;
-}
-
-#define cfs_foreach_bit(bitmap, pos)					\
-	for ((pos) = find_first_bit((bitmap)->data, bitmap->size);	\
-	     (pos) < (bitmap)->size;					\
-	     (pos) = find_next_bit((bitmap)->data, (bitmap)->size, (pos) + 1))
-
-#endif
diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h
index e6439d1..40282b7 100644
--- a/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h
+++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h
@@ -165,11 +165,11 @@
 #define CDEBUG_DEFAULT_MAX_DELAY (cfs_time_seconds(600))	 /* jiffies */
 #define CDEBUG_DEFAULT_MIN_DELAY ((cfs_time_seconds(1) + 1) / 2) /* jiffies */
 #define CDEBUG_DEFAULT_BACKOFF   2
-typedef struct {
+struct cfs_debug_limit_state {
 	cfs_time_t      cdls_next;
 	unsigned int    cdls_delay;
 	int	     cdls_count;
-} cfs_debug_limit_state_t;
+};
 
 struct libcfs_debug_msg_data {
 	const char	       *msg_file;
@@ -177,7 +177,7 @@
 	int		      msg_subsys;
 	int		      msg_line;
 	int		      msg_mask;
-	cfs_debug_limit_state_t  *msg_cdls;
+	struct cfs_debug_limit_state  *msg_cdls;
 };
 
 #define LIBCFS_DEBUG_MSG_DATA_INIT(data, mask, cdls)	\
@@ -226,7 +226,7 @@
 
 #define CDEBUG_LIMIT(mask, format, ...)	 \
 do {					    \
-	static cfs_debug_limit_state_t cdls;    \
+	static struct cfs_debug_limit_state cdls;    \
 						\
 	__CDEBUG(&cdls, mask, format, ## __VA_ARGS__);\
 } while (0)
diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_hash.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_hash.h
index 98f5be2..9d5ee1a 100644
--- a/drivers/staging/lustre/include/linux/libcfs/libcfs_hash.h
+++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_hash.h
@@ -81,10 +81,10 @@
 struct cfs_hash_lock_ops;
 struct cfs_hash_hlist_ops;
 
-typedef union {
+union cfs_hash_lock {
 	rwlock_t		rw;		/**< rwlock */
 	spinlock_t		spin;		/**< spinlock */
-} cfs_hash_lock_t;
+};
 
 /**
  * cfs_hash_bucket is a container of:
@@ -97,22 +97,22 @@
  *   which depends on requirement of user
  * - some extra bytes (caller can require it while creating hash)
  */
-typedef struct cfs_hash_bucket {
-	cfs_hash_lock_t		hsb_lock;	/**< bucket lock */
+struct cfs_hash_bucket {
+	union cfs_hash_lock	hsb_lock;	/**< bucket lock */
 	__u32			hsb_count;	/**< current entries */
 	__u32			hsb_version;	/**< change version */
 	unsigned int		hsb_index;	/**< index of bucket */
 	int			hsb_depmax;	/**< max depth on bucket */
 	long			hsb_head[0];	/**< hash-head array */
-} cfs_hash_bucket_t;
+};
 
 /**
  * cfs_hash bucket descriptor, it's normally in stack of caller
  */
-typedef struct cfs_hash_bd {
-	cfs_hash_bucket_t	  *bd_bucket;      /**< address of bucket */
+struct cfs_hash_bd {
+	struct cfs_hash_bucket	*bd_bucket;      /**< address of bucket */
 	unsigned int		bd_offset;      /**< offset in bucket */
-} cfs_hash_bd_t;
+};
 
 #define CFS_HASH_NAME_LEN	   16      /**< default name length */
 #define CFS_HASH_BIGNAME_LEN	64      /**< bigname for param tree */
@@ -210,10 +210,10 @@
  * locations; additions must take care to only insert into the new bucket.
  */
 
-typedef struct cfs_hash {
+struct cfs_hash {
 	/** serialize with rehash, or serialize all operations if
 	 * the hash-table has CFS_HASH_NO_BKTLOCK */
-	cfs_hash_lock_t	     hs_lock;
+	union cfs_hash_lock	     hs_lock;
 	/** hash operations */
 	struct cfs_hash_ops	*hs_ops;
 	/** hash lock operations */
@@ -221,7 +221,7 @@
 	/** hash list operations */
 	struct cfs_hash_hlist_ops  *hs_hops;
 	/** hash buckets-table */
-	cfs_hash_bucket_t	 **hs_buckets;
+	struct cfs_hash_bucket	 **hs_buckets;
 	/** total number of items on this hash-table */
 	atomic_t		hs_count;
 	/** hash flags, see cfs_hash_tag for detail */
@@ -255,7 +255,7 @@
 	/** refcount on this hash table */
 	atomic_t		hs_refcount;
 	/** rehash buckets-table */
-	cfs_hash_bucket_t	 **hs_rehash_buckets;
+	struct cfs_hash_bucket	 **hs_rehash_buckets;
 #if CFS_HASH_DEBUG_LEVEL >= CFS_HASH_DEBUG_1
 	/** serialize debug members */
 	spinlock_t			hs_dep_lock;
@@ -272,35 +272,35 @@
 #endif
 	/** name of htable */
 	char			hs_name[0];
-} cfs_hash_t;
+};
 
 typedef struct cfs_hash_lock_ops {
 	/** lock the hash table */
-	void    (*hs_lock)(cfs_hash_lock_t *lock, int exclusive);
+	void    (*hs_lock)(union cfs_hash_lock *lock, int exclusive);
 	/** unlock the hash table */
-	void    (*hs_unlock)(cfs_hash_lock_t *lock, int exclusive);
+	void    (*hs_unlock)(union cfs_hash_lock *lock, int exclusive);
 	/** lock the hash bucket */
-	void    (*hs_bkt_lock)(cfs_hash_lock_t *lock, int exclusive);
+	void    (*hs_bkt_lock)(union cfs_hash_lock *lock, int exclusive);
 	/** unlock the hash bucket */
-	void    (*hs_bkt_unlock)(cfs_hash_lock_t *lock, int exclusive);
+	void    (*hs_bkt_unlock)(union cfs_hash_lock *lock, int exclusive);
 } cfs_hash_lock_ops_t;
 
 typedef struct cfs_hash_hlist_ops {
 	/** return hlist_head of hash-head of @bd */
-	struct hlist_head *(*hop_hhead)(cfs_hash_t *hs, cfs_hash_bd_t *bd);
+	struct hlist_head *(*hop_hhead)(struct cfs_hash *hs, struct cfs_hash_bd *bd);
 	/** return hash-head size */
-	int (*hop_hhead_size)(cfs_hash_t *hs);
+	int (*hop_hhead_size)(struct cfs_hash *hs);
 	/** add @hnode to hash-head of @bd */
-	int (*hop_hnode_add)(cfs_hash_t *hs,
-			     cfs_hash_bd_t *bd, struct hlist_node *hnode);
+	int (*hop_hnode_add)(struct cfs_hash *hs,
+			     struct cfs_hash_bd *bd, struct hlist_node *hnode);
 	/** remove @hnode from hash-head of @bd */
-	int (*hop_hnode_del)(cfs_hash_t *hs,
-			     cfs_hash_bd_t *bd, struct hlist_node *hnode);
+	int (*hop_hnode_del)(struct cfs_hash *hs,
+			     struct cfs_hash_bd *bd, struct hlist_node *hnode);
 } cfs_hash_hlist_ops_t;
 
 typedef struct cfs_hash_ops {
 	/** return hashed value from @key */
-	unsigned (*hs_hash)(cfs_hash_t *hs, const void *key, unsigned mask);
+	unsigned (*hs_hash)(struct cfs_hash *hs, const void *key, unsigned mask);
 	/** return key address of @hnode */
 	void *   (*hs_key)(struct hlist_node *hnode);
 	/** copy key from @hnode to @key */
@@ -313,13 +313,13 @@
 	/** return object address of @hnode, i.e: container_of(...hnode) */
 	void *   (*hs_object)(struct hlist_node *hnode);
 	/** get refcount of item, always called with holding bucket-lock */
-	void     (*hs_get)(cfs_hash_t *hs, struct hlist_node *hnode);
+	void     (*hs_get)(struct cfs_hash *hs, struct hlist_node *hnode);
 	/** release refcount of item */
-	void     (*hs_put)(cfs_hash_t *hs, struct hlist_node *hnode);
+	void     (*hs_put)(struct cfs_hash *hs, struct hlist_node *hnode);
 	/** release refcount of item, always called with holding bucket-lock */
-	void     (*hs_put_locked)(cfs_hash_t *hs, struct hlist_node *hnode);
+	void     (*hs_put_locked)(struct cfs_hash *hs, struct hlist_node *hnode);
 	/** it's called before removing of @hnode */
-	void     (*hs_exit)(cfs_hash_t *hs, struct hlist_node *hnode);
+	void     (*hs_exit)(struct cfs_hash *hs, struct hlist_node *hnode);
 } cfs_hash_ops_t;
 
 /** total number of buckets in @hs */
@@ -340,41 +340,41 @@
 #define CFS_HASH_RH_NHLIST(hs)  (1U << (hs)->hs_rehash_bits)
 
 static inline int
-cfs_hash_with_no_lock(cfs_hash_t *hs)
+cfs_hash_with_no_lock(struct cfs_hash *hs)
 {
 	/* caller will serialize all operations for this hash-table */
 	return (hs->hs_flags & CFS_HASH_NO_LOCK) != 0;
 }
 
 static inline int
-cfs_hash_with_no_bktlock(cfs_hash_t *hs)
+cfs_hash_with_no_bktlock(struct cfs_hash *hs)
 {
 	/* no bucket lock, one single lock to protect the hash-table */
 	return (hs->hs_flags & CFS_HASH_NO_BKTLOCK) != 0;
 }
 
 static inline int
-cfs_hash_with_rw_bktlock(cfs_hash_t *hs)
+cfs_hash_with_rw_bktlock(struct cfs_hash *hs)
 {
 	/* rwlock to protect hash bucket */
 	return (hs->hs_flags & CFS_HASH_RW_BKTLOCK) != 0;
 }
 
 static inline int
-cfs_hash_with_spin_bktlock(cfs_hash_t *hs)
+cfs_hash_with_spin_bktlock(struct cfs_hash *hs)
 {
 	/* spinlock to protect hash bucket */
 	return (hs->hs_flags & CFS_HASH_SPIN_BKTLOCK) != 0;
 }
 
 static inline int
-cfs_hash_with_add_tail(cfs_hash_t *hs)
+cfs_hash_with_add_tail(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_ADD_TAIL) != 0;
 }
 
 static inline int
-cfs_hash_with_no_itemref(cfs_hash_t *hs)
+cfs_hash_with_no_itemref(struct cfs_hash *hs)
 {
 	/* hash-table doesn't keep refcount on item,
 	 * item can't be removed from hash unless it's
@@ -383,75 +383,75 @@
 }
 
 static inline int
-cfs_hash_with_bigname(cfs_hash_t *hs)
+cfs_hash_with_bigname(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_BIGNAME) != 0;
 }
 
 static inline int
-cfs_hash_with_counter(cfs_hash_t *hs)
+cfs_hash_with_counter(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_COUNTER) != 0;
 }
 
 static inline int
-cfs_hash_with_rehash(cfs_hash_t *hs)
+cfs_hash_with_rehash(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_REHASH) != 0;
 }
 
 static inline int
-cfs_hash_with_rehash_key(cfs_hash_t *hs)
+cfs_hash_with_rehash_key(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_REHASH_KEY) != 0;
 }
 
 static inline int
-cfs_hash_with_shrink(cfs_hash_t *hs)
+cfs_hash_with_shrink(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_SHRINK) != 0;
 }
 
 static inline int
-cfs_hash_with_assert_empty(cfs_hash_t *hs)
+cfs_hash_with_assert_empty(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_ASSERT_EMPTY) != 0;
 }
 
 static inline int
-cfs_hash_with_depth(cfs_hash_t *hs)
+cfs_hash_with_depth(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_DEPTH) != 0;
 }
 
 static inline int
-cfs_hash_with_nblk_change(cfs_hash_t *hs)
+cfs_hash_with_nblk_change(struct cfs_hash *hs)
 {
 	return (hs->hs_flags & CFS_HASH_NBLK_CHANGE) != 0;
 }
 
 static inline int
-cfs_hash_is_exiting(cfs_hash_t *hs)
+cfs_hash_is_exiting(struct cfs_hash *hs)
 {       /* cfs_hash_destroy is called */
 	return hs->hs_exiting;
 }
 
 static inline int
-cfs_hash_is_rehashing(cfs_hash_t *hs)
+cfs_hash_is_rehashing(struct cfs_hash *hs)
 {       /* rehash is launched */
 	return hs->hs_rehash_bits != 0;
 }
 
 static inline int
-cfs_hash_is_iterating(cfs_hash_t *hs)
+cfs_hash_is_iterating(struct cfs_hash *hs)
 {       /* someone is calling cfs_hash_for_each_* */
 	return hs->hs_iterating || hs->hs_iterators != 0;
 }
 
 static inline int
-cfs_hash_bkt_size(cfs_hash_t *hs)
+cfs_hash_bkt_size(struct cfs_hash *hs)
 {
-	return offsetof(cfs_hash_bucket_t, hsb_head[0]) +
+	return offsetof(struct cfs_hash_bucket, hsb_head[0]) +
 	       hs->hs_hops->hop_hhead_size(hs) * CFS_HASH_BKT_NHLIST(hs) +
 	       hs->hs_extra_bytes;
 }
@@ -459,19 +459,19 @@
 #define CFS_HOP(hs, op)	   (hs)->hs_ops->hs_ ## op
 
 static inline unsigned
-cfs_hash_id(cfs_hash_t *hs, const void *key, unsigned mask)
+cfs_hash_id(struct cfs_hash *hs, const void *key, unsigned mask)
 {
 	return CFS_HOP(hs, hash)(hs, key, mask);
 }
 
 static inline void *
-cfs_hash_key(cfs_hash_t *hs, struct hlist_node *hnode)
+cfs_hash_key(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	return CFS_HOP(hs, key)(hnode);
 }
 
 static inline void
-cfs_hash_keycpy(cfs_hash_t *hs, struct hlist_node *hnode, void *key)
+cfs_hash_keycpy(struct cfs_hash *hs, struct hlist_node *hnode, void *key)
 {
 	if (CFS_HOP(hs, keycpy) != NULL)
 		CFS_HOP(hs, keycpy)(hnode, key);
@@ -481,25 +481,25 @@
  * Returns 1 on a match,
  */
 static inline int
-cfs_hash_keycmp(cfs_hash_t *hs, const void *key, struct hlist_node *hnode)
+cfs_hash_keycmp(struct cfs_hash *hs, const void *key, struct hlist_node *hnode)
 {
 	return CFS_HOP(hs, keycmp)(key, hnode);
 }
 
 static inline void *
-cfs_hash_object(cfs_hash_t *hs, struct hlist_node *hnode)
+cfs_hash_object(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	return CFS_HOP(hs, object)(hnode);
 }
 
 static inline void
-cfs_hash_get(cfs_hash_t *hs, struct hlist_node *hnode)
+cfs_hash_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	return CFS_HOP(hs, get)(hs, hnode);
 }
 
 static inline void
-cfs_hash_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+cfs_hash_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	LASSERT(CFS_HOP(hs, put_locked) != NULL);
 
@@ -507,7 +507,7 @@
 }
 
 static inline void
-cfs_hash_put(cfs_hash_t *hs, struct hlist_node *hnode)
+cfs_hash_put(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	LASSERT(CFS_HOP(hs, put) != NULL);
 
@@ -515,37 +515,37 @@
 }
 
 static inline void
-cfs_hash_exit(cfs_hash_t *hs, struct hlist_node *hnode)
+cfs_hash_exit(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	if (CFS_HOP(hs, exit))
 		CFS_HOP(hs, exit)(hs, hnode);
 }
 
-static inline void cfs_hash_lock(cfs_hash_t *hs, int excl)
+static inline void cfs_hash_lock(struct cfs_hash *hs, int excl)
 {
 	hs->hs_lops->hs_lock(&hs->hs_lock, excl);
 }
 
-static inline void cfs_hash_unlock(cfs_hash_t *hs, int excl)
+static inline void cfs_hash_unlock(struct cfs_hash *hs, int excl)
 {
 	hs->hs_lops->hs_unlock(&hs->hs_lock, excl);
 }
 
-static inline int cfs_hash_dec_and_lock(cfs_hash_t *hs,
+static inline int cfs_hash_dec_and_lock(struct cfs_hash *hs,
 					atomic_t *condition)
 {
 	LASSERT(cfs_hash_with_no_bktlock(hs));
 	return atomic_dec_and_lock(condition, &hs->hs_lock.spin);
 }
 
-static inline void cfs_hash_bd_lock(cfs_hash_t *hs,
-				    cfs_hash_bd_t *bd, int excl)
+static inline void cfs_hash_bd_lock(struct cfs_hash *hs,
+				    struct cfs_hash_bd *bd, int excl)
 {
 	hs->hs_lops->hs_bkt_lock(&bd->bd_bucket->hsb_lock, excl);
 }
 
-static inline void cfs_hash_bd_unlock(cfs_hash_t *hs,
-				      cfs_hash_bd_t *bd, int excl)
+static inline void cfs_hash_bd_unlock(struct cfs_hash *hs,
+				      struct cfs_hash_bd *bd, int excl)
 {
 	hs->hs_lops->hs_bkt_unlock(&bd->bd_bucket->hsb_lock, excl);
 }
@@ -554,56 +554,56 @@
  * operations on cfs_hash bucket (bd: bucket descriptor),
  * they are normally for hash-table without rehash
  */
-void cfs_hash_bd_get(cfs_hash_t *hs, const void *key, cfs_hash_bd_t *bd);
+void cfs_hash_bd_get(struct cfs_hash *hs, const void *key, struct cfs_hash_bd *bd);
 
-static inline void cfs_hash_bd_get_and_lock(cfs_hash_t *hs, const void *key,
-					    cfs_hash_bd_t *bd, int excl)
+static inline void cfs_hash_bd_get_and_lock(struct cfs_hash *hs, const void *key,
+					    struct cfs_hash_bd *bd, int excl)
 {
 	cfs_hash_bd_get(hs, key, bd);
 	cfs_hash_bd_lock(hs, bd, excl);
 }
 
-static inline unsigned cfs_hash_bd_index_get(cfs_hash_t *hs, cfs_hash_bd_t *bd)
+static inline unsigned cfs_hash_bd_index_get(struct cfs_hash *hs, struct cfs_hash_bd *bd)
 {
 	return bd->bd_offset | (bd->bd_bucket->hsb_index << hs->hs_bkt_bits);
 }
 
-static inline void cfs_hash_bd_index_set(cfs_hash_t *hs,
-					 unsigned index, cfs_hash_bd_t *bd)
+static inline void cfs_hash_bd_index_set(struct cfs_hash *hs,
+					 unsigned index, struct cfs_hash_bd *bd)
 {
 	bd->bd_bucket = hs->hs_buckets[index >> hs->hs_bkt_bits];
 	bd->bd_offset = index & (CFS_HASH_BKT_NHLIST(hs) - 1U);
 }
 
 static inline void *
-cfs_hash_bd_extra_get(cfs_hash_t *hs, cfs_hash_bd_t *bd)
+cfs_hash_bd_extra_get(struct cfs_hash *hs, struct cfs_hash_bd *bd)
 {
 	return (void *)bd->bd_bucket +
 	       cfs_hash_bkt_size(hs) - hs->hs_extra_bytes;
 }
 
 static inline __u32
-cfs_hash_bd_version_get(cfs_hash_bd_t *bd)
+cfs_hash_bd_version_get(struct cfs_hash_bd *bd)
 {
 	/* need hold cfs_hash_bd_lock */
 	return bd->bd_bucket->hsb_version;
 }
 
 static inline __u32
-cfs_hash_bd_count_get(cfs_hash_bd_t *bd)
+cfs_hash_bd_count_get(struct cfs_hash_bd *bd)
 {
 	/* need hold cfs_hash_bd_lock */
 	return bd->bd_bucket->hsb_count;
 }
 
 static inline int
-cfs_hash_bd_depmax_get(cfs_hash_bd_t *bd)
+cfs_hash_bd_depmax_get(struct cfs_hash_bd *bd)
 {
 	return bd->bd_bucket->hsb_depmax;
 }
 
 static inline int
-cfs_hash_bd_compare(cfs_hash_bd_t *bd1, cfs_hash_bd_t *bd2)
+cfs_hash_bd_compare(struct cfs_hash_bd *bd1, struct cfs_hash_bd *bd2)
 {
 	if (bd1->bd_bucket->hsb_index != bd2->bd_bucket->hsb_index)
 		return bd1->bd_bucket->hsb_index - bd2->bd_bucket->hsb_index;
@@ -614,14 +614,14 @@
 	return 0;
 }
 
-void cfs_hash_bd_add_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+void cfs_hash_bd_add_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			    struct hlist_node *hnode);
-void cfs_hash_bd_del_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+void cfs_hash_bd_del_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			    struct hlist_node *hnode);
-void cfs_hash_bd_move_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd_old,
-			     cfs_hash_bd_t *bd_new, struct hlist_node *hnode);
+void cfs_hash_bd_move_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd_old,
+			     struct cfs_hash_bd *bd_new, struct hlist_node *hnode);
 
-static inline int cfs_hash_bd_dec_and_lock(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static inline int cfs_hash_bd_dec_and_lock(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 					   atomic_t *condition)
 {
 	LASSERT(cfs_hash_with_spin_bktlock(hs));
@@ -629,109 +629,109 @@
 				       &bd->bd_bucket->hsb_lock.spin);
 }
 
-static inline struct hlist_head *cfs_hash_bd_hhead(cfs_hash_t *hs,
-						  cfs_hash_bd_t *bd)
+static inline struct hlist_head *cfs_hash_bd_hhead(struct cfs_hash *hs,
+						  struct cfs_hash_bd *bd)
 {
 	return hs->hs_hops->hop_hhead(hs, bd);
 }
 
-struct hlist_node *cfs_hash_bd_lookup_locked(cfs_hash_t *hs,
-					    cfs_hash_bd_t *bd, const void *key);
-struct hlist_node *cfs_hash_bd_peek_locked(cfs_hash_t *hs,
-					  cfs_hash_bd_t *bd, const void *key);
-struct hlist_node *cfs_hash_bd_findadd_locked(cfs_hash_t *hs,
-					     cfs_hash_bd_t *bd, const void *key,
+struct hlist_node *cfs_hash_bd_lookup_locked(struct cfs_hash *hs,
+					    struct cfs_hash_bd *bd, const void *key);
+struct hlist_node *cfs_hash_bd_peek_locked(struct cfs_hash *hs,
+					  struct cfs_hash_bd *bd, const void *key);
+struct hlist_node *cfs_hash_bd_findadd_locked(struct cfs_hash *hs,
+					     struct cfs_hash_bd *bd, const void *key,
 					     struct hlist_node *hnode,
 					     int insist_add);
-struct hlist_node *cfs_hash_bd_finddel_locked(cfs_hash_t *hs,
-					     cfs_hash_bd_t *bd, const void *key,
+struct hlist_node *cfs_hash_bd_finddel_locked(struct cfs_hash *hs,
+					     struct cfs_hash_bd *bd, const void *key,
 					     struct hlist_node *hnode);
 
 /**
  * operations on cfs_hash bucket (bd: bucket descriptor),
  * they are safe for hash-table with rehash
  */
-void cfs_hash_dual_bd_get(cfs_hash_t *hs, const void *key, cfs_hash_bd_t *bds);
-void cfs_hash_dual_bd_lock(cfs_hash_t *hs, cfs_hash_bd_t *bds, int excl);
-void cfs_hash_dual_bd_unlock(cfs_hash_t *hs, cfs_hash_bd_t *bds, int excl);
+void cfs_hash_dual_bd_get(struct cfs_hash *hs, const void *key, struct cfs_hash_bd *bds);
+void cfs_hash_dual_bd_lock(struct cfs_hash *hs, struct cfs_hash_bd *bds, int excl);
+void cfs_hash_dual_bd_unlock(struct cfs_hash *hs, struct cfs_hash_bd *bds, int excl);
 
-static inline void cfs_hash_dual_bd_get_and_lock(cfs_hash_t *hs, const void *key,
-						 cfs_hash_bd_t *bds, int excl)
+static inline void cfs_hash_dual_bd_get_and_lock(struct cfs_hash *hs, const void *key,
+						 struct cfs_hash_bd *bds, int excl)
 {
 	cfs_hash_dual_bd_get(hs, key, bds);
 	cfs_hash_dual_bd_lock(hs, bds, excl);
 }
 
-struct hlist_node *cfs_hash_dual_bd_lookup_locked(cfs_hash_t *hs,
-						 cfs_hash_bd_t *bds,
+struct hlist_node *cfs_hash_dual_bd_lookup_locked(struct cfs_hash *hs,
+						 struct cfs_hash_bd *bds,
 						 const void *key);
-struct hlist_node *cfs_hash_dual_bd_findadd_locked(cfs_hash_t *hs,
-						  cfs_hash_bd_t *bds,
+struct hlist_node *cfs_hash_dual_bd_findadd_locked(struct cfs_hash *hs,
+						  struct cfs_hash_bd *bds,
 						  const void *key,
 						  struct hlist_node *hnode,
 						  int insist_add);
-struct hlist_node *cfs_hash_dual_bd_finddel_locked(cfs_hash_t *hs,
-						  cfs_hash_bd_t *bds,
+struct hlist_node *cfs_hash_dual_bd_finddel_locked(struct cfs_hash *hs,
+						  struct cfs_hash_bd *bds,
 						  const void *key,
 						  struct hlist_node *hnode);
 
 /* Hash init/cleanup functions */
-cfs_hash_t *cfs_hash_create(char *name, unsigned cur_bits, unsigned max_bits,
+struct cfs_hash *cfs_hash_create(char *name, unsigned cur_bits, unsigned max_bits,
 			    unsigned bkt_bits, unsigned extra_bytes,
 			    unsigned min_theta, unsigned max_theta,
 			    cfs_hash_ops_t *ops, unsigned flags);
 
-cfs_hash_t *cfs_hash_getref(cfs_hash_t *hs);
-void cfs_hash_putref(cfs_hash_t *hs);
+struct cfs_hash *cfs_hash_getref(struct cfs_hash *hs);
+void cfs_hash_putref(struct cfs_hash *hs);
 
 /* Hash addition functions */
-void cfs_hash_add(cfs_hash_t *hs, const void *key,
+void cfs_hash_add(struct cfs_hash *hs, const void *key,
 		  struct hlist_node *hnode);
-int cfs_hash_add_unique(cfs_hash_t *hs, const void *key,
+int cfs_hash_add_unique(struct cfs_hash *hs, const void *key,
 			struct hlist_node *hnode);
-void *cfs_hash_findadd_unique(cfs_hash_t *hs, const void *key,
+void *cfs_hash_findadd_unique(struct cfs_hash *hs, const void *key,
 			      struct hlist_node *hnode);
 
 /* Hash deletion functions */
-void *cfs_hash_del(cfs_hash_t *hs, const void *key, struct hlist_node *hnode);
-void *cfs_hash_del_key(cfs_hash_t *hs, const void *key);
+void *cfs_hash_del(struct cfs_hash *hs, const void *key, struct hlist_node *hnode);
+void *cfs_hash_del_key(struct cfs_hash *hs, const void *key);
 
 /* Hash lookup/for_each functions */
 #define CFS_HASH_LOOP_HOG       1024
 
-typedef int (*cfs_hash_for_each_cb_t)(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+typedef int (*cfs_hash_for_each_cb_t)(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 				      struct hlist_node *node, void *data);
-void *cfs_hash_lookup(cfs_hash_t *hs, const void *key);
-void cfs_hash_for_each(cfs_hash_t *hs, cfs_hash_for_each_cb_t, void *data);
-void cfs_hash_for_each_safe(cfs_hash_t *hs, cfs_hash_for_each_cb_t, void *data);
-int  cfs_hash_for_each_nolock(cfs_hash_t *hs,
+void *cfs_hash_lookup(struct cfs_hash *hs, const void *key);
+void cfs_hash_for_each(struct cfs_hash *hs, cfs_hash_for_each_cb_t, void *data);
+void cfs_hash_for_each_safe(struct cfs_hash *hs, cfs_hash_for_each_cb_t, void *data);
+int  cfs_hash_for_each_nolock(struct cfs_hash *hs,
 			      cfs_hash_for_each_cb_t, void *data);
-int  cfs_hash_for_each_empty(cfs_hash_t *hs,
+int  cfs_hash_for_each_empty(struct cfs_hash *hs,
 			     cfs_hash_for_each_cb_t, void *data);
-void cfs_hash_for_each_key(cfs_hash_t *hs, const void *key,
+void cfs_hash_for_each_key(struct cfs_hash *hs, const void *key,
 			   cfs_hash_for_each_cb_t, void *data);
 typedef int (*cfs_hash_cond_opt_cb_t)(void *obj, void *data);
-void cfs_hash_cond_del(cfs_hash_t *hs, cfs_hash_cond_opt_cb_t, void *data);
+void cfs_hash_cond_del(struct cfs_hash *hs, cfs_hash_cond_opt_cb_t, void *data);
 
-void cfs_hash_hlist_for_each(cfs_hash_t *hs, unsigned hindex,
+void cfs_hash_hlist_for_each(struct cfs_hash *hs, unsigned hindex,
 			     cfs_hash_for_each_cb_t, void *data);
-int  cfs_hash_is_empty(cfs_hash_t *hs);
-__u64 cfs_hash_size_get(cfs_hash_t *hs);
+int  cfs_hash_is_empty(struct cfs_hash *hs);
+__u64 cfs_hash_size_get(struct cfs_hash *hs);
 
 /*
  * Rehash - Theta is calculated to be the average chained
  * hash depth assuming a perfectly uniform hash function.
  */
-void cfs_hash_rehash_cancel_locked(cfs_hash_t *hs);
-void cfs_hash_rehash_cancel(cfs_hash_t *hs);
-int  cfs_hash_rehash(cfs_hash_t *hs, int do_rehash);
-void cfs_hash_rehash_key(cfs_hash_t *hs, const void *old_key,
+void cfs_hash_rehash_cancel_locked(struct cfs_hash *hs);
+void cfs_hash_rehash_cancel(struct cfs_hash *hs);
+int  cfs_hash_rehash(struct cfs_hash *hs, int do_rehash);
+void cfs_hash_rehash_key(struct cfs_hash *hs, const void *old_key,
 			 void *new_key, struct hlist_node *hnode);
 
 #if CFS_HASH_DEBUG_LEVEL > CFS_HASH_DEBUG_1
 /* Validate hnode references the correct key */
 static inline void
-cfs_hash_key_validate(cfs_hash_t *hs, const void *key,
+cfs_hash_key_validate(struct cfs_hash *hs, const void *key,
 		      struct hlist_node *hnode)
 {
 	LASSERT(cfs_hash_keycmp(hs, key, hnode));
@@ -739,10 +739,10 @@
 
 /* Validate hnode is in the correct bucket */
 static inline void
-cfs_hash_bucket_validate(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_bucket_validate(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			 struct hlist_node *hnode)
 {
-	cfs_hash_bd_t   bds[2];
+	struct cfs_hash_bd   bds[2];
 
 	cfs_hash_dual_bd_get(hs, cfs_hash_key(hs, hnode), bds);
 	LASSERT(bds[0].bd_bucket == bd->bd_bucket ||
@@ -752,11 +752,11 @@
 #else /* CFS_HASH_DEBUG_LEVEL > CFS_HASH_DEBUG_1 */
 
 static inline void
-cfs_hash_key_validate(cfs_hash_t *hs, const void *key,
+cfs_hash_key_validate(struct cfs_hash *hs, const void *key,
 		      struct hlist_node *hnode) {}
 
 static inline void
-cfs_hash_bucket_validate(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_bucket_validate(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			 struct hlist_node *hnode) {}
 
 #endif /* CFS_HASH_DEBUG_LEVEL */
@@ -778,13 +778,13 @@
 	       (__cfs_hash_theta_int(theta) * 1000);
 }
 
-static inline int __cfs_hash_theta(cfs_hash_t *hs)
+static inline int __cfs_hash_theta(struct cfs_hash *hs)
 {
 	return (atomic_read(&hs->hs_count) <<
 		CFS_HASH_THETA_BITS) >> hs->hs_cur_bits;
 }
 
-static inline void __cfs_hash_set_theta(cfs_hash_t *hs, int min, int max)
+static inline void __cfs_hash_set_theta(struct cfs_hash *hs, int min, int max)
 {
 	LASSERT(min < max);
 	hs->hs_min_theta = (__u16)min;
@@ -794,7 +794,7 @@
 /* Generic debug formatting routines mainly for proc handler */
 struct seq_file;
 int cfs_hash_debug_header(struct seq_file *m);
-int cfs_hash_debug_str(cfs_hash_t *hs, struct seq_file *m);
+int cfs_hash_debug_str(struct cfs_hash *hs, struct seq_file *m);
 
 /*
  * Generic djb2 hash algorithm for character arrays.
@@ -830,7 +830,7 @@
 	return ((unsigned)(key * CFS_GOLDEN_RATIO_PRIME_64) & mask);
 }
 
-/** iterate over all buckets in @bds (array of cfs_hash_bd_t) */
+/** iterate over all buckets in @bds (array of struct cfs_hash_bd) */
 #define cfs_hash_for_each_bd(bds, n, i) \
 	for (i = 0; i < n && (bds)[i].bd_bucket != NULL; i++)
 
diff --git a/drivers/staging/lustre/include/linux/lnet/lib-lnet.h b/drivers/staging/lustre/include/linux/lnet/lib-lnet.h
index 59bff0b..bf30104 100644
--- a/drivers/staging/lustre/include/linux/lnet/lib-lnet.h
+++ b/drivers/staging/lustre/include/linux/lnet/lib-lnet.h
@@ -79,20 +79,20 @@
 /** exclusive lock */
 #define LNET_LOCK_EX	    CFS_PERCPT_LOCK_EX
 
-static inline int lnet_is_wire_handle_none (lnet_handle_wire_t *wh)
+static inline int lnet_is_wire_handle_none(lnet_handle_wire_t *wh)
 {
 	return (wh->wh_interface_cookie == LNET_WIRE_HANDLE_COOKIE_NONE &&
 		wh->wh_object_cookie == LNET_WIRE_HANDLE_COOKIE_NONE);
 }
 
-static inline int lnet_md_exhausted (lnet_libmd_t *md)
+static inline int lnet_md_exhausted(lnet_libmd_t *md)
 {
 	return (md->md_threshold == 0 ||
 		((md->md_options & LNET_MD_MAX_SIZE) != 0 &&
 		 md->md_offset + md->md_max_size > md->md_length));
 }
 
-static inline int lnet_md_unlinkable (lnet_libmd_t *md)
+static inline int lnet_md_unlinkable(lnet_libmd_t *md)
 {
 	/* Should unlink md when its refcount is 0 and either:
 	 *  - md has been flagged for deletion (by auto unlink or LNetM[DE]Unlink,
@@ -193,31 +193,31 @@
 void lnet_freelist_fini(lnet_freelist_t *fl);
 
 static inline void *
-lnet_freelist_alloc (lnet_freelist_t *fl)
+lnet_freelist_alloc(lnet_freelist_t *fl)
 {
 	/* ALWAYS called with liblock held */
 	lnet_freeobj_t *o;
 
-	if (list_empty (&fl->fl_list))
-		return (NULL);
+	if (list_empty(&fl->fl_list))
+		return NULL;
 
-	o = list_entry (fl->fl_list.next, lnet_freeobj_t, fo_list);
-	list_del (&o->fo_list);
-	return ((void *)&o->fo_contents);
+	o = list_entry(fl->fl_list.next, lnet_freeobj_t, fo_list);
+	list_del(&o->fo_list);
+	return (void *)&o->fo_contents;
 }
 
 static inline void
-lnet_freelist_free (lnet_freelist_t *fl, void *obj)
+lnet_freelist_free(lnet_freelist_t *fl, void *obj)
 {
 	/* ALWAYS called with liblock held */
-	lnet_freeobj_t *o = list_entry (obj, lnet_freeobj_t, fo_contents);
+	lnet_freeobj_t *o = list_entry(obj, lnet_freeobj_t, fo_contents);
 
-	list_add (&o->fo_list, &fl->fl_list);
+	list_add(&o->fo_list, &fl->fl_list);
 }
 
 
 static inline lnet_eq_t *
-lnet_eq_alloc (void)
+lnet_eq_alloc(void)
 {
 	/* NEVER called with resource lock held */
 	struct lnet_res_container *rec = &the_lnet.ln_eq_container;
@@ -251,7 +251,7 @@
 }
 
 static inline lnet_libmd_t *
-lnet_md_alloc (lnet_md_t *umd)
+lnet_md_alloc(lnet_md_t *umd)
 {
 	/* NEVER called with resource lock held */
 	struct lnet_res_container *rec = the_lnet.ln_md_containers[0];
@@ -322,7 +322,7 @@
 }
 
 static inline lnet_msg_t *
-lnet_msg_alloc (void)
+lnet_msg_alloc(void)
 {
 	/* NEVER called with network lock held */
 	struct lnet_msg_container *msc = the_lnet.ln_msg_containers[0];
@@ -353,7 +353,7 @@
 }
 
 static inline void
-lnet_msg_free (lnet_msg_t *msg)
+lnet_msg_free(lnet_msg_t *msg)
 {
 	lnet_net_lock(0);
 	lnet_msg_free_locked(msg);
@@ -363,13 +363,13 @@
 #else /* !LNET_USE_LIB_FREELIST */
 
 static inline lnet_eq_t *
-lnet_eq_alloc (void)
+lnet_eq_alloc(void)
 {
 	/* NEVER called with liblock held */
 	lnet_eq_t *eq;
 
 	LIBCFS_ALLOC(eq, sizeof(*eq));
-	return (eq);
+	return eq;
 }
 
 static inline void
@@ -380,7 +380,7 @@
 }
 
 static inline lnet_libmd_t *
-lnet_md_alloc (lnet_md_t *umd)
+lnet_md_alloc(lnet_md_t *umd)
 {
 	/* NEVER called with liblock held */
 	lnet_libmd_t *md;
@@ -405,7 +405,7 @@
 		INIT_LIST_HEAD(&md->md_list);
 	}
 
-	return (md);
+	return md;
 }
 
 static inline void
@@ -423,13 +423,13 @@
 }
 
 static inline lnet_me_t *
-lnet_me_alloc (void)
+lnet_me_alloc(void)
 {
 	/* NEVER called with liblock held */
 	lnet_me_t *me;
 
 	LIBCFS_ALLOC(me, sizeof(*me));
-	return (me);
+	return me;
 }
 
 static inline void
@@ -448,7 +448,7 @@
 	LIBCFS_ALLOC(msg, sizeof(*msg));
 
 	/* no need to zero, LIBCFS_ALLOC does for us */
-	return (msg);
+	return msg;
 }
 
 static inline void
@@ -479,7 +479,7 @@
 }
 
 static inline void
-lnet_eq2handle (lnet_handle_eq_t *handle, lnet_eq_t *eq)
+lnet_eq2handle(lnet_handle_eq_t *handle, lnet_eq_t *eq)
 {
 	if (eq == NULL) {
 		LNetInvalidateHandle(handle);
@@ -503,7 +503,7 @@
 }
 
 static inline void
-lnet_md2handle (lnet_handle_md_t *handle, lnet_libmd_t *md)
+lnet_md2handle(lnet_handle_md_t *handle, lnet_libmd_t *md)
 {
 	handle->cookie = md->md_lh.lh_cookie;
 }
@@ -544,7 +544,7 @@
 }
 
 static inline void
-lnet_me2handle (lnet_handle_me_t *handle, lnet_me_t *me)
+lnet_me2handle(lnet_handle_me_t *handle, lnet_me_t *me)
 {
 	handle->cookie = me->me_lh.lh_cookie;
 }
@@ -568,7 +568,7 @@
 static inline void
 lnet_peer_addref_locked(lnet_peer_t *lp)
 {
-	LASSERT (lp->lp_refcount > 0);
+	LASSERT(lp->lp_refcount > 0);
 	lp->lp_refcount++;
 }
 
@@ -577,7 +577,7 @@
 static inline void
 lnet_peer_decref_locked(lnet_peer_t *lp)
 {
-	LASSERT (lp->lp_refcount > 0);
+	LASSERT(lp->lp_refcount > 0);
 	lp->lp_refcount--;
 	if (lp->lp_refcount == 0)
 		lnet_destroy_peer_locked(lp);
@@ -660,7 +660,7 @@
 void lnet_proc_fini(void);
 int  lnet_rtrpools_alloc(int im_a_router);
 void lnet_rtrpools_free(void);
-lnet_remotenet_t *lnet_find_net_locked (__u32 net);
+lnet_remotenet_t *lnet_find_net_locked(__u32 net);
 
 int lnet_islocalnid(lnet_nid_t nid);
 int lnet_islocalnet(__u32 net);
@@ -733,11 +733,11 @@
 void lnet_portals_destroy(void);
 
 /* message functions */
-int lnet_parse (lnet_ni_t *ni, lnet_hdr_t *hdr,
+int lnet_parse(lnet_ni_t *ni, lnet_hdr_t *hdr,
 		lnet_nid_t fromnid, void *private, int rdma_req);
 void lnet_recv(lnet_ni_t *ni, void *private, lnet_msg_t *msg, int delayed,
 	       unsigned int offset, unsigned int mlen, unsigned int rlen);
-lnet_msg_t *lnet_create_reply_msg (lnet_ni_t *ni, lnet_msg_t *get_msg);
+lnet_msg_t *lnet_create_reply_msg(lnet_ni_t *ni, lnet_msg_t *get_msg);
 void lnet_set_reply_msg_len(lnet_ni_t *ni, lnet_msg_t *msg, unsigned int len);
 void lnet_finalize(lnet_ni_t *ni, lnet_msg_t *msg, int rc);
 void lnet_drop_delayed_msg_list(struct list_head *head, char *reason);
@@ -748,36 +748,36 @@
 void lnet_msg_containers_destroy(void);
 int lnet_msg_containers_create(void);
 
-char *lnet_msgtyp2str (int type);
-void lnet_print_hdr (lnet_hdr_t * hdr);
+char *lnet_msgtyp2str(int type);
+void lnet_print_hdr(lnet_hdr_t *hdr);
 int lnet_fail_nid(lnet_nid_t nid, unsigned int threshold);
 
 void lnet_counters_get(lnet_counters_t *counters);
 void lnet_counters_reset(void);
 
-unsigned int lnet_iov_nob (unsigned int niov, struct iovec *iov);
-int lnet_extract_iov (int dst_niov, struct iovec *dst,
+unsigned int lnet_iov_nob(unsigned int niov, struct iovec *iov);
+int lnet_extract_iov(int dst_niov, struct iovec *dst,
 		      int src_niov, struct iovec *src,
 		      unsigned int offset, unsigned int len);
 
-unsigned int lnet_kiov_nob (unsigned int niov, lnet_kiov_t *iov);
-int lnet_extract_kiov (int dst_niov, lnet_kiov_t *dst,
+unsigned int lnet_kiov_nob(unsigned int niov, lnet_kiov_t *iov);
+int lnet_extract_kiov(int dst_niov, lnet_kiov_t *dst,
 		      int src_niov, lnet_kiov_t *src,
 		      unsigned int offset, unsigned int len);
 
-void lnet_copy_iov2iov (unsigned int ndiov, struct iovec *diov,
+void lnet_copy_iov2iov(unsigned int ndiov, struct iovec *diov,
 			unsigned int doffset,
 			unsigned int nsiov, struct iovec *siov,
 			unsigned int soffset, unsigned int nob);
-void lnet_copy_kiov2iov (unsigned int niov, struct iovec *iov,
+void lnet_copy_kiov2iov(unsigned int niov, struct iovec *iov,
 			 unsigned int iovoffset,
 			 unsigned int nkiov, lnet_kiov_t *kiov,
 			 unsigned int kiovoffset, unsigned int nob);
-void lnet_copy_iov2kiov (unsigned int nkiov, lnet_kiov_t *kiov,
+void lnet_copy_iov2kiov(unsigned int nkiov, lnet_kiov_t *kiov,
 			 unsigned int kiovoffset,
 			 unsigned int niov, struct iovec *iov,
 			 unsigned int iovoffset, unsigned int nob);
-void lnet_copy_kiov2kiov (unsigned int ndkiov, lnet_kiov_t *dkiov,
+void lnet_copy_kiov2kiov(unsigned int ndkiov, lnet_kiov_t *dkiov,
 			  unsigned int doffset,
 			  unsigned int nskiov, lnet_kiov_t *skiov,
 			  unsigned int soffset, unsigned int nob);
@@ -829,7 +829,7 @@
 
 void lnet_register_lnd(lnd_t *lnd);
 void lnet_unregister_lnd(lnd_t *lnd);
-int lnet_set_ip_niaddr (lnet_ni_t *ni);
+int lnet_set_ip_niaddr(lnet_ni_t *ni);
 
 int lnet_connect(socket_t **sockp, lnet_nid_t peer_nid,
 		 __u32 local_ip, __u32 peer_ip, int peer_port);
@@ -858,9 +858,9 @@
 int lnet_ping(lnet_process_id_t id, int timeout_ms,
 	      lnet_process_id_t *ids, int n_ids);
 
-int lnet_parse_ip2nets (char **networksp, char *ip2nets);
-int lnet_parse_routes (char *route_str, int *im_a_router);
-int lnet_parse_networks (struct list_head *nilist, char *networks);
+int lnet_parse_ip2nets(char **networksp, char *ip2nets);
+int lnet_parse_routes(char *route_str, int *im_a_router);
+int lnet_parse_networks(struct list_head *nilist, char *networks);
 
 int lnet_nid2peer_locked(lnet_peer_t **lpp, lnet_nid_t nid, int cpt);
 lnet_peer_t *lnet_find_peer_locked(struct lnet_peer_table *ptable,
diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c
index 6825b45..2ddc3aa 100644
--- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c
+++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c
@@ -1768,7 +1768,10 @@
 	if (id.nid == LNET_NID_ANY || id.pid == LNET_PID_ANY || ipaddr == 0)
 		return (0);
 
-	return (count == 0 ? -ENOENT : 0);
+	if (count == 0)
+		return -ENOENT;
+	else
+		return 0;
 }
 
 void
diff --git a/drivers/staging/lustre/lnet/lnet/acceptor.c b/drivers/staging/lustre/lnet/lnet/acceptor.c
index bb15bde..92c60a7 100644
--- a/drivers/staging/lustre/lnet/lnet/acceptor.c
+++ b/drivers/staging/lustre/lnet/lnet/acceptor.c
@@ -53,6 +53,7 @@
 {
 	return accept_port;
 }
+EXPORT_SYMBOL(lnet_acceptor_port);
 
 static inline int
 lnet_accept_magic(__u32 magic, __u32 constant)
@@ -61,9 +62,6 @@
 		magic == __swab32(constant));
 }
 
-
-EXPORT_SYMBOL(lnet_acceptor_port);
-
 static char *accept = "secure";
 
 CFS_MODULE_PARM(accept, "s", charp, 0444,
@@ -75,7 +73,7 @@
 CFS_MODULE_PARM(accept_timeout, "i", int, 0644,
 		"Acceptor's timeout (seconds)");
 
-static char *accept_type = NULL;
+static char *accept_type;
 
 int
 lnet_acceptor_get_tunables(void)
@@ -95,57 +93,45 @@
 EXPORT_SYMBOL(lnet_acceptor_timeout);
 
 void
-lnet_connect_console_error (int rc, lnet_nid_t peer_nid,
+lnet_connect_console_error(int rc, lnet_nid_t peer_nid,
 			   __u32 peer_ip, int peer_port)
 {
 	switch (rc) {
 	/* "normal" errors */
 	case -ECONNREFUSED:
-		CNETERR("Connection to %s at host %pI4h on port %d was "
-			"refused: check that Lustre is running on that node.\n",
+		CNETERR("Connection to %s at host %pI4h on port %d was refused: check that Lustre is running on that node.\n",
 			libcfs_nid2str(peer_nid),
 			&peer_ip, peer_port);
 		break;
 	case -EHOSTUNREACH:
 	case -ENETUNREACH:
-		CNETERR("Connection to %s at host %pI4h "
-			"was unreachable: the network or that node may "
-			"be down, or Lustre may be misconfigured.\n",
+		CNETERR("Connection to %s at host %pI4h was unreachable: the network or that node may be down, or Lustre may be misconfigured.\n",
 			libcfs_nid2str(peer_nid), &peer_ip);
 		break;
 	case -ETIMEDOUT:
-		CNETERR("Connection to %s at host %pI4h on "
-			"port %d took too long: that node may be hung "
-			"or experiencing high load.\n",
+		CNETERR("Connection to %s at host %pI4h on port %d took too long: that node may be hung or experiencing high load.\n",
 			libcfs_nid2str(peer_nid),
 			&peer_ip, peer_port);
 		break;
 	case -ECONNRESET:
-		LCONSOLE_ERROR_MSG(0x11b, "Connection to %s at host %pI4h"
-				   " on port %d was reset: "
-				   "is it running a compatible version of "
-				   "Lustre and is %s one of its NIDs?\n",
+		LCONSOLE_ERROR_MSG(0x11b, "Connection to %s at host %pI4h on port %d was reset: is it running a compatible version of Lustre and is %s one of its NIDs?\n",
 				   libcfs_nid2str(peer_nid),
 				   &peer_ip, peer_port,
 				   libcfs_nid2str(peer_nid));
 		break;
 	case -EPROTO:
-		LCONSOLE_ERROR_MSG(0x11c, "Protocol error connecting to %s at "
-				   "host %pI4h on port %d: is it running "
-				   "a compatible version of Lustre?\n",
+		LCONSOLE_ERROR_MSG(0x11c, "Protocol error connecting to %s at host %pI4h on port %d: is it running a compatible version of Lustre?\n",
 				   libcfs_nid2str(peer_nid),
 				   &peer_ip, peer_port);
 		break;
 	case -EADDRINUSE:
-		LCONSOLE_ERROR_MSG(0x11d, "No privileged ports available to "
-				   "connect to %s at host %pI4h on port "
-				   "%d\n", libcfs_nid2str(peer_nid),
+		LCONSOLE_ERROR_MSG(0x11d, "No privileged ports available to connect to %s at host %pI4h on port %d\n",
+				   libcfs_nid2str(peer_nid),
 				   &peer_ip, peer_port);
 		break;
 	default:
-		LCONSOLE_ERROR_MSG(0x11e, "Unexpected error %d connecting to %s"
-				   " at host %pI4h on port %d\n", rc,
-				   libcfs_nid2str(peer_nid),
+		LCONSOLE_ERROR_MSG(0x11e, "Unexpected error %d connecting to %s at host %pI4h on port %d\n",
+				   rc, libcfs_nid2str(peer_nid),
 				   &peer_ip, peer_port);
 		break;
 	}
@@ -162,7 +148,7 @@
 	int		     port;
 	int		     fatal;
 
-	CLASSERT (sizeof(cr) <= 16);	    /* not too big to be on the stack */
+	CLASSERT(sizeof(cr) <= 16);	    /* not too big to be on the stack */
 
 	for (port = LNET_ACCEPTOR_MAX_RESERVED_PORT;
 	     port >= LNET_ACCEPTOR_MIN_RESERVED_PORT;
@@ -178,7 +164,7 @@
 			continue;
 		}
 
-		CLASSERT (LNET_PROTO_ACCEPTOR_VERSION == 1);
+		CLASSERT(LNET_PROTO_ACCEPTOR_VERSION == 1);
 
 		cr.acr_magic   = LNET_PROTO_ACCEPTOR_MAGIC;
 		cr.acr_version = LNET_PROTO_ACCEPTOR_VERSION;
@@ -232,10 +218,10 @@
 	lnet_ni_t	      *ni;
 	char		   *str;
 
-	LASSERT (sizeof(cr) <= 16);	     /* not too big for the stack */
+	LASSERT(sizeof(cr) <= 16);	     /* not too big for the stack */
 
 	rc = libcfs_sock_getaddr(sock, 1, &peer_ip, &peer_port);
-	LASSERT (rc == 0);		      /* we succeeded before */
+	LASSERT(rc == 0);		      /* we succeeded before */
 
 	if (!lnet_accept_magic(magic, LNET_PROTO_ACCEPTOR_MAGIC)) {
 
@@ -245,15 +231,14 @@
 			 * thing sent will be a version query.  I send back
 			 * LNET_PROTO_ACCEPTOR_MAGIC to tell her I'm "old" */
 
-			memset (&cr, 0, sizeof(cr));
+			memset(&cr, 0, sizeof(cr));
 			cr.acr_magic = LNET_PROTO_ACCEPTOR_MAGIC;
 			cr.acr_version = LNET_PROTO_ACCEPTOR_VERSION;
 			rc = libcfs_sock_write(sock, &cr, sizeof(cr),
 					       accept_timeout);
 
 			if (rc != 0)
-				CERROR("Error sending magic+version in response"
-				       "to LNET magic from %pI4h: %d\n",
+				CERROR("Error sending magic+version in response to LNET magic from %pI4h: %d\n",
 				       &peer_ip, rc);
 			return -EPROTO;
 		}
@@ -265,8 +250,7 @@
 		else
 			str = "unrecognised";
 
-		LCONSOLE_ERROR_MSG(0x11f, "Refusing connection from %pI4h"
-				   " magic %08x: %s acceptor protocol\n",
+		LCONSOLE_ERROR_MSG(0x11f, "Refusing connection from %pI4h magic %08x: %s acceptor protocol\n",
 				   &peer_ip, magic, str);
 		return -EPROTO;
 	}
@@ -277,8 +261,8 @@
 			      sizeof(cr.acr_version),
 			      accept_timeout);
 	if (rc != 0) {
-		CERROR("Error %d reading connection request version from "
-		       "%pI4h\n", rc, &peer_ip);
+		CERROR("Error %d reading connection request version from %pI4h\n",
+			rc, &peer_ip);
 		return -EIO;
 	}
 
@@ -292,7 +276,7 @@
 		 * "old". */
 		int peer_version = cr.acr_version;
 
-		memset (&cr, 0, sizeof(cr));
+		memset(&cr, 0, sizeof(cr));
 		cr.acr_magic = LNET_PROTO_ACCEPTOR_MAGIC;
 		cr.acr_version = LNET_PROTO_ACCEPTOR_VERSION;
 
@@ -300,8 +284,7 @@
 				       accept_timeout);
 
 		if (rc != 0)
-			CERROR("Error sending magic+version in response"
-			       "to version %d from %pI4h: %d\n",
+			CERROR("Error sending magic+version in response to version %d from %pI4h: %d\n",
 			       peer_version, &peer_ip, rc);
 		return -EPROTO;
 	}
@@ -311,8 +294,8 @@
 			      offsetof(lnet_acceptor_connreq_t, acr_nid),
 			      accept_timeout);
 	if (rc != 0) {
-		CERROR("Error %d reading connection request from "
-		       "%pI4h\n", rc, &peer_ip);
+		CERROR("Error %d reading connection request from %pI4h\n",
+			rc, &peer_ip);
 		return -EIO;
 	}
 
@@ -324,8 +307,7 @@
 	    ni->ni_nid != cr.acr_nid) { /* right NET, wrong NID! */
 		if (ni != NULL)
 			lnet_ni_decref(ni);
-		LCONSOLE_ERROR_MSG(0x120, "Refusing connection from %pI4h"
-				   " for %s: No matching NI\n",
+		LCONSOLE_ERROR_MSG(0x120, "Refusing connection from %pI4h for %s: No matching NI\n",
 				   &peer_ip, libcfs_nid2str(cr.acr_nid));
 		return -EPERM;
 	}
@@ -333,8 +315,7 @@
 	if (ni->ni_lnd->lnd_accept == NULL) {
 		/* This catches a request for the loopback LND */
 		lnet_ni_decref(ni);
-		LCONSOLE_ERROR_MSG(0x121, "Refusing connection from %pI4h"
-				  " for %s: NI doesn not accept IP connections\n",
+		LCONSOLE_ERROR_MSG(0x121, "Refusing connection from %pI4h for %s: NI doesn not accept IP connections\n",
 				  &peer_ip, libcfs_nid2str(cr.acr_nid));
 		return -EPERM;
 	}
@@ -358,7 +339,7 @@
 	int	    peer_port;
 	int	    secure = (int)((long_ptr_t)arg);
 
-	LASSERT (lnet_acceptor_state.pta_sock == NULL);
+	LASSERT(lnet_acceptor_state.pta_sock == NULL);
 
 	cfs_block_allsigs();
 
@@ -366,12 +347,10 @@
 				0, accept_port, accept_backlog);
 	if (rc != 0) {
 		if (rc == -EADDRINUSE)
-			LCONSOLE_ERROR_MSG(0x122, "Can't start acceptor on port"
-					   " %d: port already in use\n",
+			LCONSOLE_ERROR_MSG(0x122, "Can't start acceptor on port %d: port already in use\n",
 					   accept_port);
 		else
-			LCONSOLE_ERROR_MSG(0x123, "Can't start acceptor on port "
-					   "%d: unexpected error %d\n",
+			LCONSOLE_ERROR_MSG(0x123, "Can't start acceptor on port %d: unexpected error %d\n",
 					   accept_port, rc);
 
 		lnet_acceptor_state.pta_sock = NULL;
@@ -410,8 +389,7 @@
 		}
 
 		if (secure && peer_port > LNET_ACCEPTOR_MAX_RESERVED_PORT) {
-			CERROR("Refusing connection from %pI4h: "
-			       "insecure port %d\n",
+			CERROR("Refusing connection from %pI4h: insecure port %d\n",
 			       &peer_ip, peer_port);
 			goto failed;
 		}
@@ -419,8 +397,8 @@
 		rc = libcfs_sock_read(newsock, &magic, sizeof(magic),
 				      accept_timeout);
 		if (rc != 0) {
-			CERROR("Error %d reading connection request from "
-			       "%pI4h\n", rc, &peer_ip);
+			CERROR("Error %d reading connection request from %pI4h\n",
+				rc, &peer_ip);
 			goto failed;
 		}
 
@@ -430,7 +408,7 @@
 
 		continue;
 
-	failed:
+failed:
 		libcfs_sock_release(newsock);
 	}
 
@@ -469,7 +447,7 @@
 	long rc2;
 	long secure;
 
-	LASSERT (lnet_acceptor_state.pta_sock == NULL);
+	LASSERT(lnet_acceptor_state.pta_sock == NULL);
 
 	rc = lnet_acceptor_get_tunables();
 	if (rc != 0)
diff --git a/drivers/staging/lustre/lnet/lnet/config.c b/drivers/staging/lustre/lnet/lnet/config.c
index 28711e6..de323f7 100644
--- a/drivers/staging/lustre/lnet/lnet/config.c
+++ b/drivers/staging/lustre/lnet/lnet/config.c
@@ -43,7 +43,7 @@
 	char	       ltb_text[0];     /* text buffer */
 } lnet_text_buf_t;
 
-static int lnet_tbnob = 0;			/* track text buf allocation */
+static int lnet_tbnob;			/* track text buf allocation */
 #define LNET_MAX_TEXTBUF_NOB     (64<<10)	/* bound allocation */
 #define LNET_SINGLE_TEXTBUF_NOB  (4<<10)
 
@@ -65,7 +65,7 @@
 }
 
 int
-lnet_issep (char c)
+lnet_issep(char c)
 {
 	switch (c) {
 	case '\n':
@@ -83,7 +83,7 @@
 	struct list_head       *tmp;
 	lnet_ni_t	*ni;
 
-	list_for_each (tmp, nilist) {
+	list_for_each(tmp, nilist) {
 		ni = list_entry(tmp, lnet_ni_t, ni_list);
 
 		if (LNET_NIDNET(ni->ni_nid) == net)
@@ -188,8 +188,8 @@
 
 	if (strlen(networks) > LNET_SINGLE_TEXTBUF_NOB) {
 		/* _WAY_ conservative */
-		LCONSOLE_ERROR_MSG(0x112, "Can't parse networks: string too "
-				   "long\n");
+		LCONSOLE_ERROR_MSG(0x112,
+				   "Can't parse networks: string too long\n");
 		return -EINVAL;
 	}
 
@@ -201,7 +201,7 @@
 
 	the_lnet.ln_network_tokens = tokens;
 	the_lnet.ln_network_tokens_nob = tokensize;
-	memcpy (tokens, networks, tokensize);
+	memcpy(tokens, networks, tokensize);
 	str = tmp = tokens;
 
 	/* Add in the loopback network */
@@ -255,8 +255,8 @@
 			net = libcfs_str2net(cfs_trimwhite(str));
 
 			if (net == LNET_NIDNET(LNET_NID_ANY)) {
-				LCONSOLE_ERROR_MSG(0x113, "Unrecognised network"
-						   " type\n");
+				LCONSOLE_ERROR_MSG(0x113,
+						   "Unrecognised network type\n");
 				tmp = str;
 				goto failed_syntax;
 			}
@@ -313,8 +313,8 @@
 			}
 
 			if (niface == LNET_MAX_INTERFACES) {
-				LCONSOLE_ERROR_MSG(0x115, "Too many interfaces "
-						   "for net %s\n",
+				LCONSOLE_ERROR_MSG(0x115,
+						   "Too many interfaces for net %s\n",
 						   libcfs_net2str(net));
 				goto failed;
 			}
@@ -366,7 +366,7 @@
 }
 
 lnet_text_buf_t *
-lnet_new_text_buf (int str_len)
+lnet_new_text_buf(int str_len)
 {
 	lnet_text_buf_t *ltb;
 	int	      nob;
@@ -395,7 +395,7 @@
 }
 
 void
-lnet_free_text_buf (lnet_text_buf_t *ltb)
+lnet_free_text_buf(lnet_text_buf_t *ltb)
 {
 	lnet_tbnob -= ltb->ltb_size;
 	LIBCFS_FREE(ltb, ltb->ltb_size);
@@ -420,7 +420,7 @@
 	struct list_head	*tmp;
 	lnet_text_buf_t   *ltb;
 
-	list_for_each (tmp, tbs) {
+	list_for_each(tmp, tbs) {
 		ltb = list_entry(tmp, lnet_text_buf_t, ltb_list);
 
 		CDEBUG(D_WARNING, "%s\n", ltb->ltb_text);
@@ -430,7 +430,7 @@
 }
 
 int
-lnet_str2tbs_sep (struct list_head *tbs, char *str)
+lnet_str2tbs_sep(struct list_head *tbs, char *str)
 {
 	struct list_head	pending;
 	char	     *sep;
@@ -488,7 +488,7 @@
 }
 
 int
-lnet_expand1tb (struct list_head *list,
+lnet_expand1tb(struct list_head *list,
 	       char *str, char *sep1, char *sep2,
 	       char *item, int itemlen)
 {
@@ -496,8 +496,8 @@
 	int	      len2 = strlen(sep2 + 1);
 	lnet_text_buf_t *ltb;
 
-	LASSERT (*sep1 == '[');
-	LASSERT (*sep2 == ']');
+	LASSERT(*sep1 == '[');
+	LASSERT(*sep2 == ']');
 
 	ltb = lnet_new_text_buf(len1 + itemlen + len2);
 	if (ltb == NULL)
@@ -513,7 +513,7 @@
 }
 
 int
-lnet_str2tbs_expand (struct list_head *tbs, char *str)
+lnet_str2tbs_expand(struct list_head *tbs, char *str)
 {
 	char	      num[16];
 	struct list_head	pending;
@@ -593,7 +593,7 @@
 }
 
 int
-lnet_parse_hops (char *str, unsigned int *hops)
+lnet_parse_hops(char *str, unsigned int *hops)
 {
 	int     len = strlen(str);
 	int     nob = len;
@@ -605,7 +605,7 @@
 
 
 int
-lnet_parse_route (char *str, int *im_a_router)
+lnet_parse_route(char *str, int *im_a_router)
 {
 	/* static scratch buffer OK (single threaded) */
 	static char       cmd[LNET_SINGLE_TEXTBUF_NOB];
@@ -702,28 +702,27 @@
 	if (!got_hops)
 		hops = 1;
 
-	LASSERT (!list_empty(&nets));
-	LASSERT (!list_empty(&gateways));
+	LASSERT(!list_empty(&nets));
+	LASSERT(!list_empty(&gateways));
 
-	list_for_each (tmp1, &nets) {
+	list_for_each(tmp1, &nets) {
 		ltb = list_entry(tmp1, lnet_text_buf_t, ltb_list);
 		net = libcfs_str2net(ltb->ltb_text);
-		LASSERT (net != LNET_NIDNET(LNET_NID_ANY));
+		LASSERT(net != LNET_NIDNET(LNET_NID_ANY));
 
-		list_for_each (tmp2, &gateways) {
+		list_for_each(tmp2, &gateways) {
 			ltb = list_entry(tmp2, lnet_text_buf_t, ltb_list);
 			nid = libcfs_str2nid(ltb->ltb_text);
-			LASSERT (nid != LNET_NID_ANY);
+			LASSERT(nid != LNET_NID_ANY);
 
 			if (lnet_islocalnid(nid)) {
 				*im_a_router = 1;
 				continue;
 			}
 
-			rc = lnet_add_route (net, hops, nid);
+			rc = lnet_add_route(net, hops, nid);
 			if (rc != 0) {
-				CERROR("Can't create route "
-				       "to %s via %s\n",
+				CERROR("Can't create route to %s via %s\n",
 				       libcfs_net2str(net),
 				       libcfs_nid2str(nid));
 				goto out;
@@ -763,7 +762,7 @@
 }
 
 int
-lnet_parse_routes (char *routes, int *im_a_router)
+lnet_parse_routes(char *routes, int *im_a_router)
 {
 	struct list_head	tbs;
 	int	       rc = 0;
@@ -779,14 +778,14 @@
 		rc = lnet_parse_route_tbs(&tbs, im_a_router);
 	}
 
-	LASSERT (lnet_tbnob == 0);
+	LASSERT(lnet_tbnob == 0);
 	return rc;
 }
 
 int
 lnet_match_network_token(char *token, int len, __u32 *ipaddrs, int nip)
 {
-	LIST_HEAD	(list);
+	LIST_HEAD(list);
 	int		rc;
 	int		i;
 
@@ -815,7 +814,7 @@
 	char *token;
 	int   rc;
 
-	LASSERT (strlen(net_entry) < sizeof(tokens));
+	LASSERT(strlen(net_entry) < sizeof(tokens));
 
 	/* work on a copy of the string */
 	strcpy(tokens, net_entry);
@@ -889,8 +888,8 @@
 	char	     *bracket;
 	__u32	     net;
 
-	LASSERT (!list_empty(nets));
-	LASSERT (nets->next == nets->prev);     /* single entry */
+	LASSERT(!list_empty(nets));
+	LASSERT(nets->next == nets->prev);     /* single entry */
 
 	tb = list_entry(nets->next, lnet_text_buf_t, ltb_list);
 
@@ -957,7 +956,7 @@
 }
 
 int
-lnet_match_networks (char **networksp, char *ip2nets, __u32 *ipaddrs, int nip)
+lnet_match_networks(char **networksp, char *ip2nets, __u32 *ipaddrs, int nip)
 {
 	static char	networks[LNET_SINGLE_TEXTBUF_NOB];
 	static char	source[LNET_SINGLE_TEXTBUF_NOB];
@@ -979,7 +978,7 @@
 	INIT_LIST_HEAD(&raw_entries);
 	if (lnet_str2tbs_sep(&raw_entries, ip2nets) < 0) {
 		CERROR("Error parsing ip2nets\n");
-		LASSERT (lnet_tbnob == 0);
+		LASSERT(lnet_tbnob == 0);
 		return -EINVAL;
 	}
 
@@ -1017,16 +1016,16 @@
 			break;
 
 		dup = 0;
-		list_for_each (t, &current_nets) {
+		list_for_each(t, &current_nets) {
 			tb = list_entry(t, lnet_text_buf_t, ltb_list);
 			net1 = lnet_netspec2net(tb->ltb_text);
-			LASSERT (net1 != LNET_NIDNET(LNET_NID_ANY));
+			LASSERT(net1 != LNET_NIDNET(LNET_NID_ANY));
 
 			list_for_each(t2, &matched_nets) {
 				tb2 = list_entry(t2, lnet_text_buf_t,
 						     ltb_list);
 				net2 = lnet_netspec2net(tb2->ltb_text);
-				LASSERT (net2 != LNET_NIDNET(LNET_NID_ANY));
+				LASSERT(net2 != LNET_NIDNET(LNET_NID_ANY));
 
 				if (net1 == net2) {
 					dup = 1;
@@ -1067,7 +1066,7 @@
 	lnet_free_text_bufs(&raw_entries);
 	lnet_free_text_bufs(&matched_nets);
 	lnet_free_text_bufs(&current_nets);
-	LASSERT (lnet_tbnob == 0);
+	LASSERT(lnet_tbnob == 0);
 
 	if (rc < 0)
 		return rc;
@@ -1083,7 +1082,7 @@
 }
 
 int
-lnet_ipaddr_enumerate (__u32 **ipaddrsp)
+lnet_ipaddr_enumerate(__u32 **ipaddrsp)
 {
 	int	up;
 	__u32      netmask;
@@ -1149,21 +1148,22 @@
 }
 
 int
-lnet_parse_ip2nets (char **networksp, char *ip2nets)
+lnet_parse_ip2nets(char **networksp, char *ip2nets)
 {
 	__u32     *ipaddrs;
 	int	nip = lnet_ipaddr_enumerate(&ipaddrs);
 	int	rc;
 
 	if (nip < 0) {
-		LCONSOLE_ERROR_MSG(0x117, "Error %d enumerating local IP "
-				   "interfaces for ip2nets to match\n", nip);
+		LCONSOLE_ERROR_MSG(0x117,
+				   "Error %d enumerating local IP interfaces for ip2nets to match\n",
+				   nip);
 		return nip;
 	}
 
 	if (nip == 0) {
-		LCONSOLE_ERROR_MSG(0x118, "No local IP interfaces "
-				   "for ip2nets to match\n");
+		LCONSOLE_ERROR_MSG(0x118,
+				   "No local IP interfaces for ip2nets to match\n");
 		return -ENOENT;
 	}
 
@@ -1176,8 +1176,8 @@
 	}
 
 	if (rc == 0) {
-		LCONSOLE_ERROR_MSG(0x11a, "ip2nets does not match "
-				   "any local IP interfaces\n");
+		LCONSOLE_ERROR_MSG(0x11a,
+				   "ip2nets does not match any local IP interfaces\n");
 		return -ENOENT;
 	}
 
@@ -1185,7 +1185,7 @@
 }
 
 int
-lnet_set_ip_niaddr (lnet_ni_t *ni)
+lnet_set_ip_niaddr(lnet_ni_t *ni)
 {
 	__u32  net = LNET_NIDNET(ni->ni_nid);
 	char **names;
@@ -1201,7 +1201,7 @@
 
 	if (ni->ni_interfaces[0] != NULL) {
 
-		CLASSERT (LNET_MAX_INTERFACES > 1);
+		CLASSERT(LNET_MAX_INTERFACES > 1);
 
 		if (ni->ni_interfaces[1] != NULL) {
 			CERROR("Net %s doesn't support multiple interfaces\n",
diff --git a/drivers/staging/lustre/lnet/lnet/lib-move.c b/drivers/staging/lustre/lnet/lnet/lib-move.c
index 49b0f12..b6f8ad3 100644
--- a/drivers/staging/lustre/lnet/lnet/lib-move.c
+++ b/drivers/staging/lustre/lnet/lnet/lib-move.c
@@ -47,14 +47,14 @@
 		"Reserved");
 
 int
-lnet_fail_nid (lnet_nid_t nid, unsigned int threshold)
+lnet_fail_nid(lnet_nid_t nid, unsigned int threshold)
 {
 	lnet_test_peer_t  *tp;
 	struct list_head	*el;
 	struct list_head	*next;
 	struct list_head	 cull;
 
-	LASSERT (the_lnet.ln_init);
+	LASSERT(the_lnet.ln_init);
 
 	/* NB: use lnet_net_lock(0) to serialize operations on test peers */
 	if (threshold != 0) {
@@ -77,31 +77,30 @@
 
 	lnet_net_lock(0);
 
-	list_for_each_safe (el, next, &the_lnet.ln_test_peers) {
-		tp = list_entry (el, lnet_test_peer_t, tp_list);
+	list_for_each_safe(el, next, &the_lnet.ln_test_peers) {
+		tp = list_entry(el, lnet_test_peer_t, tp_list);
 
 		if (tp->tp_threshold == 0 ||    /* needs culling anyway */
 		    nid == LNET_NID_ANY ||       /* removing all entries */
-		    tp->tp_nid == nid)	  /* matched this one */
-		{
-			list_del (&tp->tp_list);
-			list_add (&tp->tp_list, &cull);
+		    tp->tp_nid == nid) {	  /* matched this one */
+			list_del(&tp->tp_list);
+			list_add(&tp->tp_list, &cull);
 		}
 	}
 
 	lnet_net_unlock(0);
 
-	while (!list_empty (&cull)) {
-		tp = list_entry (cull.next, lnet_test_peer_t, tp_list);
+	while (!list_empty(&cull)) {
+		tp = list_entry(cull.next, lnet_test_peer_t, tp_list);
 
-		list_del (&tp->tp_list);
-		LIBCFS_FREE(tp, sizeof (*tp));
+		list_del(&tp->tp_list);
+		LIBCFS_FREE(tp, sizeof(*tp));
 	}
 	return 0;
 }
 
 static int
-fail_peer (lnet_nid_t nid, int outgoing)
+fail_peer(lnet_nid_t nid, int outgoing)
 {
 	lnet_test_peer_t *tp;
 	struct list_head       *el;
@@ -109,13 +108,13 @@
 	struct list_head	cull;
 	int	       fail = 0;
 
-	INIT_LIST_HEAD (&cull);
+	INIT_LIST_HEAD(&cull);
 
 	/* NB: use lnet_net_lock(0) to serialize operations on test peers */
 	lnet_net_lock(0);
 
-	list_for_each_safe (el, next, &the_lnet.ln_test_peers) {
-		tp = list_entry (el, lnet_test_peer_t, tp_list);
+	list_for_each_safe(el, next, &the_lnet.ln_test_peers) {
+		tp = list_entry(el, lnet_test_peer_t, tp_list);
 
 		if (tp->tp_threshold == 0) {
 			/* zombie entry */
@@ -123,8 +122,8 @@
 				/* only cull zombies on outgoing tests,
 				 * since we may be at interrupt priority on
 				 * incoming messages. */
-				list_del (&tp->tp_list);
-				list_add (&tp->tp_list, &cull);
+				list_del(&tp->tp_list);
+				list_add(&tp->tp_list, &cull);
 			}
 			continue;
 		}
@@ -138,8 +137,8 @@
 				if (outgoing &&
 				    tp->tp_threshold == 0) {
 					/* see above */
-					list_del (&tp->tp_list);
-					list_add (&tp->tp_list, &cull);
+					list_del(&tp->tp_list);
+					list_add(&tp->tp_list, &cull);
 				}
 			}
 			break;
@@ -148,30 +147,30 @@
 
 	lnet_net_unlock(0);
 
-	while (!list_empty (&cull)) {
-		tp = list_entry (cull.next, lnet_test_peer_t, tp_list);
-		list_del (&tp->tp_list);
+	while (!list_empty(&cull)) {
+		tp = list_entry(cull.next, lnet_test_peer_t, tp_list);
+		list_del(&tp->tp_list);
 
-		LIBCFS_FREE(tp, sizeof (*tp));
+		LIBCFS_FREE(tp, sizeof(*tp));
 	}
 
-	return (fail);
+	return fail;
 }
 
 unsigned int
-lnet_iov_nob (unsigned int niov, struct iovec *iov)
+lnet_iov_nob(unsigned int niov, struct iovec *iov)
 {
 	unsigned int nob = 0;
 
 	while (niov-- > 0)
 		nob += (iov++)->iov_len;
 
-	return (nob);
+	return nob;
 }
 EXPORT_SYMBOL(lnet_iov_nob);
 
 void
-lnet_copy_iov2iov (unsigned int ndiov, struct iovec *diov, unsigned int doffset,
+lnet_copy_iov2iov(unsigned int ndiov, struct iovec *diov, unsigned int doffset,
 		   unsigned int nsiov, struct iovec *siov, unsigned int soffset,
 		   unsigned int nob)
 {
@@ -182,31 +181,31 @@
 		return;
 
 	/* skip complete frags before 'doffset' */
-	LASSERT (ndiov > 0);
+	LASSERT(ndiov > 0);
 	while (doffset >= diov->iov_len) {
 		doffset -= diov->iov_len;
 		diov++;
 		ndiov--;
-		LASSERT (ndiov > 0);
+		LASSERT(ndiov > 0);
 	}
 
 	/* skip complete frags before 'soffset' */
-	LASSERT (nsiov > 0);
+	LASSERT(nsiov > 0);
 	while (soffset >= siov->iov_len) {
 		soffset -= siov->iov_len;
 		siov++;
 		nsiov--;
-		LASSERT (nsiov > 0);
+		LASSERT(nsiov > 0);
 	}
 
 	do {
-		LASSERT (ndiov > 0);
-		LASSERT (nsiov > 0);
+		LASSERT(ndiov > 0);
+		LASSERT(nsiov > 0);
 		this_nob = MIN(diov->iov_len - doffset,
 			       siov->iov_len - soffset);
 		this_nob = MIN(this_nob, nob);
 
-		memcpy ((char *)diov->iov_base + doffset,
+		memcpy((char *)diov->iov_base + doffset,
 			(char *)siov->iov_base + soffset, this_nob);
 		nob -= this_nob;
 
@@ -230,7 +229,7 @@
 EXPORT_SYMBOL(lnet_copy_iov2iov);
 
 int
-lnet_extract_iov (int dst_niov, struct iovec *dst,
+lnet_extract_iov(int dst_niov, struct iovec *dst,
 		  int src_niov, struct iovec *src,
 		  unsigned int offset, unsigned int len)
 {
@@ -241,27 +240,27 @@
 	unsigned int    niov;
 
 	if (len == 0)			   /* no data => */
-		return (0);		     /* no frags */
+		return 0;		     /* no frags */
 
-	LASSERT (src_niov > 0);
+	LASSERT(src_niov > 0);
 	while (offset >= src->iov_len) {      /* skip initial frags */
 		offset -= src->iov_len;
 		src_niov--;
 		src++;
-		LASSERT (src_niov > 0);
+		LASSERT(src_niov > 0);
 	}
 
 	niov = 1;
 	for (;;) {
-		LASSERT (src_niov > 0);
-		LASSERT ((int)niov <= dst_niov);
+		LASSERT(src_niov > 0);
+		LASSERT((int)niov <= dst_niov);
 
 		frag_len = src->iov_len - offset;
 		dst->iov_base = ((char *)src->iov_base) + offset;
 
 		if (len <= frag_len) {
 			dst->iov_len = len;
-			return (niov);
+			return niov;
 		}
 
 		dst->iov_len = frag_len;
@@ -278,21 +277,21 @@
 
 
 unsigned int
-lnet_kiov_nob (unsigned int niov, lnet_kiov_t *kiov)
+lnet_kiov_nob(unsigned int niov, lnet_kiov_t *kiov)
 {
 	unsigned int  nob = 0;
 
 	while (niov-- > 0)
 		nob += (kiov++)->kiov_len;
 
-	return (nob);
+	return nob;
 }
 EXPORT_SYMBOL(lnet_kiov_nob);
 
 void
-lnet_copy_kiov2kiov (unsigned int ndiov, lnet_kiov_t *diov, unsigned int doffset,
-		     unsigned int nsiov, lnet_kiov_t *siov, unsigned int soffset,
-		     unsigned int nob)
+lnet_copy_kiov2kiov(unsigned int ndiov, lnet_kiov_t *diov, unsigned int doffset,
+		    unsigned int nsiov, lnet_kiov_t *siov, unsigned int soffset,
+		    unsigned int nob)
 {
 	/* NB diov, siov are READ-ONLY */
 	unsigned int    this_nob;
@@ -302,27 +301,27 @@
 	if (nob == 0)
 		return;
 
-	LASSERT (!in_interrupt ());
+	LASSERT(!in_interrupt());
 
-	LASSERT (ndiov > 0);
+	LASSERT(ndiov > 0);
 	while (doffset >= diov->kiov_len) {
 		doffset -= diov->kiov_len;
 		diov++;
 		ndiov--;
-		LASSERT (ndiov > 0);
+		LASSERT(ndiov > 0);
 	}
 
-	LASSERT (nsiov > 0);
+	LASSERT(nsiov > 0);
 	while (soffset >= siov->kiov_len) {
 		soffset -= siov->kiov_len;
 		siov++;
 		nsiov--;
-		LASSERT (nsiov > 0);
+		LASSERT(nsiov > 0);
 	}
 
 	do {
-		LASSERT (ndiov > 0);
-		LASSERT (nsiov > 0);
+		LASSERT(ndiov > 0);
+		LASSERT(nsiov > 0);
 		this_nob = MIN(diov->kiov_len - doffset,
 			       siov->kiov_len - soffset);
 		this_nob = MIN(this_nob, nob);
@@ -338,7 +337,7 @@
 		 * However in practice at least one of the kiovs will be mapped
 		 * kernel pages and the map/unmap will be NOOPs */
 
-		memcpy (daddr, saddr, this_nob);
+		memcpy(daddr, saddr, this_nob);
 		nob -= this_nob;
 
 		if (diov->kiov_len > doffset + this_nob) {
@@ -372,9 +371,9 @@
 EXPORT_SYMBOL(lnet_copy_kiov2kiov);
 
 void
-lnet_copy_kiov2iov (unsigned int niov, struct iovec *iov, unsigned int iovoffset,
-		    unsigned int nkiov, lnet_kiov_t *kiov, unsigned int kiovoffset,
-		    unsigned int nob)
+lnet_copy_kiov2iov(unsigned int niov, struct iovec *iov, unsigned int iovoffset,
+		   unsigned int nkiov, lnet_kiov_t *kiov,
+		   unsigned int kiovoffset, unsigned int nob)
 {
 	/* NB iov, kiov are READ-ONLY */
 	unsigned int    this_nob;
@@ -383,27 +382,27 @@
 	if (nob == 0)
 		return;
 
-	LASSERT (!in_interrupt ());
+	LASSERT(!in_interrupt());
 
-	LASSERT (niov > 0);
+	LASSERT(niov > 0);
 	while (iovoffset >= iov->iov_len) {
 		iovoffset -= iov->iov_len;
 		iov++;
 		niov--;
-		LASSERT (niov > 0);
+		LASSERT(niov > 0);
 	}
 
-	LASSERT (nkiov > 0);
+	LASSERT(nkiov > 0);
 	while (kiovoffset >= kiov->kiov_len) {
 		kiovoffset -= kiov->kiov_len;
 		kiov++;
 		nkiov--;
-		LASSERT (nkiov > 0);
+		LASSERT(nkiov > 0);
 	}
 
 	do {
-		LASSERT (niov > 0);
-		LASSERT (nkiov > 0);
+		LASSERT(niov > 0);
+		LASSERT(nkiov > 0);
 		this_nob = MIN(iov->iov_len - iovoffset,
 			       kiov->kiov_len - kiovoffset);
 		this_nob = MIN(this_nob, nob);
@@ -412,7 +411,7 @@
 			addr = ((char *)kmap(kiov->kiov_page)) +
 				kiov->kiov_offset + kiovoffset;
 
-		memcpy ((char *)iov->iov_base + iovoffset, addr, this_nob);
+		memcpy((char *)iov->iov_base + iovoffset, addr, this_nob);
 		nob -= this_nob;
 
 		if (iov->iov_len > iovoffset + this_nob) {
@@ -442,9 +441,10 @@
 EXPORT_SYMBOL(lnet_copy_kiov2iov);
 
 void
-lnet_copy_iov2kiov (unsigned int nkiov, lnet_kiov_t *kiov, unsigned int kiovoffset,
-		    unsigned int niov, struct iovec *iov, unsigned int iovoffset,
-		    unsigned int nob)
+lnet_copy_iov2kiov(unsigned int nkiov, lnet_kiov_t *kiov,
+		   unsigned int kiovoffset, unsigned int niov,
+		   struct iovec *iov, unsigned int iovoffset,
+		   unsigned int nob)
 {
 	/* NB kiov, iov are READ-ONLY */
 	unsigned int    this_nob;
@@ -453,27 +453,27 @@
 	if (nob == 0)
 		return;
 
-	LASSERT (!in_interrupt ());
+	LASSERT(!in_interrupt());
 
-	LASSERT (nkiov > 0);
+	LASSERT(nkiov > 0);
 	while (kiovoffset >= kiov->kiov_len) {
 		kiovoffset -= kiov->kiov_len;
 		kiov++;
 		nkiov--;
-		LASSERT (nkiov > 0);
+		LASSERT(nkiov > 0);
 	}
 
-	LASSERT (niov > 0);
+	LASSERT(niov > 0);
 	while (iovoffset >= iov->iov_len) {
 		iovoffset -= iov->iov_len;
 		iov++;
 		niov--;
-		LASSERT (niov > 0);
+		LASSERT(niov > 0);
 	}
 
 	do {
-		LASSERT (nkiov > 0);
-		LASSERT (niov > 0);
+		LASSERT(nkiov > 0);
+		LASSERT(niov > 0);
 		this_nob = MIN(kiov->kiov_len - kiovoffset,
 			       iov->iov_len - iovoffset);
 		this_nob = MIN(this_nob, nob);
@@ -482,7 +482,7 @@
 			addr = ((char *)kmap(kiov->kiov_page)) +
 				kiov->kiov_offset + kiovoffset;
 
-		memcpy (addr, (char *)iov->iov_base + iovoffset, this_nob);
+		memcpy(addr, (char *)iov->iov_base + iovoffset, this_nob);
 		nob -= this_nob;
 
 		if (kiov->kiov_len > kiovoffset + this_nob) {
@@ -511,7 +511,7 @@
 EXPORT_SYMBOL(lnet_copy_iov2kiov);
 
 int
-lnet_extract_kiov (int dst_niov, lnet_kiov_t *dst,
+lnet_extract_kiov(int dst_niov, lnet_kiov_t *dst,
 		   int src_niov, lnet_kiov_t *src,
 		   unsigned int offset, unsigned int len)
 {
@@ -522,20 +522,20 @@
 	unsigned int    niov;
 
 	if (len == 0)			   /* no data => */
-		return (0);		     /* no frags */
+		return 0;		     /* no frags */
 
-	LASSERT (src_niov > 0);
+	LASSERT(src_niov > 0);
 	while (offset >= src->kiov_len) {      /* skip initial frags */
 		offset -= src->kiov_len;
 		src_niov--;
 		src++;
-		LASSERT (src_niov > 0);
+		LASSERT(src_niov > 0);
 	}
 
 	niov = 1;
 	for (;;) {
-		LASSERT (src_niov > 0);
-		LASSERT ((int)niov <= dst_niov);
+		LASSERT(src_niov > 0);
+		LASSERT((int)niov <= dst_niov);
 
 		frag_len = src->kiov_len - offset;
 		dst->kiov_page = src->kiov_page;
@@ -543,12 +543,13 @@
 
 		if (len <= frag_len) {
 			dst->kiov_len = len;
-			LASSERT (dst->kiov_offset + dst->kiov_len <= PAGE_CACHE_SIZE);
-			return (niov);
+			LASSERT(dst->kiov_offset + dst->kiov_len
+					     <= PAGE_CACHE_SIZE);
+			return niov;
 		}
 
 		dst->kiov_len = frag_len;
-		LASSERT (dst->kiov_offset + dst->kiov_len <= PAGE_CACHE_SIZE);
+		LASSERT(dst->kiov_offset + dst->kiov_len <= PAGE_CACHE_SIZE);
 
 		len -= frag_len;
 		dst++;
@@ -569,8 +570,8 @@
 	lnet_kiov_t  *kiov = NULL;
 	int	   rc;
 
-	LASSERT (!in_interrupt ());
-	LASSERT (mlen == 0 || msg != NULL);
+	LASSERT(!in_interrupt());
+	LASSERT(mlen == 0 || msg != NULL);
 
 	if (msg != NULL) {
 		LASSERT(msg->msg_receiving);
@@ -587,8 +588,8 @@
 			iov  = msg->msg_iov;
 			kiov = msg->msg_kiov;
 
-			LASSERT (niov > 0);
-			LASSERT ((iov == NULL) != (kiov == NULL));
+			LASSERT(niov > 0);
+			LASSERT((iov == NULL) != (kiov == NULL));
 		}
 	}
 
@@ -603,12 +604,12 @@
 {
 	lnet_libmd_t *md = msg->msg_md;
 
-	LASSERT (msg->msg_len > 0);
-	LASSERT (!msg->msg_routing);
-	LASSERT (md != NULL);
-	LASSERT (msg->msg_niov == 0);
-	LASSERT (msg->msg_iov == NULL);
-	LASSERT (msg->msg_kiov == NULL);
+	LASSERT(msg->msg_len > 0);
+	LASSERT(!msg->msg_routing);
+	LASSERT(md != NULL);
+	LASSERT(msg->msg_niov == 0);
+	LASSERT(msg->msg_iov == NULL);
+	LASSERT(msg->msg_kiov == NULL);
 
 	msg->msg_niov = md->md_niov;
 	if ((md->md_options & LNET_MD_KIOV) != 0)
@@ -629,7 +630,7 @@
 	if (len != 0)
 		lnet_setpayloadbuffer(msg);
 
-	memset (&msg->msg_hdr, 0, sizeof (msg->msg_hdr));
+	memset(&msg->msg_hdr, 0, sizeof(msg->msg_hdr));
 	msg->msg_hdr.type	   = cpu_to_le32(type);
 	msg->msg_hdr.dest_nid       = cpu_to_le64(target.nid);
 	msg->msg_hdr.dest_pid       = cpu_to_le32(target.pid);
@@ -644,8 +645,8 @@
 	void   *priv = msg->msg_private;
 	int     rc;
 
-	LASSERT (!in_interrupt ());
-	LASSERT (LNET_NETTYP(LNET_NIDNET(ni->ni_nid)) == LOLND ||
+	LASSERT(!in_interrupt());
+	LASSERT(LNET_NETTYP(LNET_NIDNET(ni->ni_nid)) == LOLND ||
 		 (msg->msg_txcredit && msg->msg_peertxcredit));
 
 	rc = (ni->ni_lnd->lnd_send)(ni, priv, msg);
@@ -698,12 +699,12 @@
 
 /* NB: always called with lnet_net_lock held */
 static inline int
-lnet_peer_is_alive (lnet_peer_t *lp, cfs_time_t now)
+lnet_peer_is_alive(lnet_peer_t *lp, cfs_time_t now)
 {
 	int	alive;
 	cfs_time_t deadline;
 
-	LASSERT (lnet_peer_aliveness_enabled(lp));
+	LASSERT(lnet_peer_aliveness_enabled(lp));
 
 	/* Trust lnet_notify() if it has more recent aliveness news, but
 	 * ignore the initial assumed death (see lnet_peers_start_down()).
@@ -731,7 +732,7 @@
 /* NB: returns 1 when alive, 0 when dead, negative when error;
  *     may drop the lnet_net_lock */
 int
-lnet_peer_alive_locked (lnet_peer_t *lp)
+lnet_peer_alive_locked(lnet_peer_t *lp)
 {
 	cfs_time_t now = cfs_time_current();
 
@@ -809,7 +810,7 @@
 	}
 
 	if (!msg->msg_peertxcredit) {
-		LASSERT ((lp->lp_txcredits < 0) ==
+		LASSERT((lp->lp_txcredits < 0) ==
 			 !list_empty(&lp->lp_txq));
 
 		msg->msg_peertxcredit = 1;
@@ -873,7 +874,7 @@
 }
 
 int
-lnet_post_routed_recv_locked (lnet_msg_t *msg, int do_recv)
+lnet_post_routed_recv_locked(lnet_msg_t *msg, int do_recv)
 {
 	/* lnet_parse is going to lnet_net_unlock immediately after this, so it
 	 * sets do_recv FALSE and I don't do the unlock/send/lock bit.  I
@@ -882,18 +883,18 @@
 	lnet_rtrbufpool_t   *rbp;
 	lnet_rtrbuf_t       *rb;
 
-	LASSERT (msg->msg_iov == NULL);
-	LASSERT (msg->msg_kiov == NULL);
-	LASSERT (msg->msg_niov == 0);
-	LASSERT (msg->msg_routing);
-	LASSERT (msg->msg_receiving);
-	LASSERT (!msg->msg_sending);
+	LASSERT(msg->msg_iov == NULL);
+	LASSERT(msg->msg_kiov == NULL);
+	LASSERT(msg->msg_niov == 0);
+	LASSERT(msg->msg_routing);
+	LASSERT(msg->msg_receiving);
+	LASSERT(!msg->msg_sending);
 
 	/* non-lnet_parse callers only receive delayed messages */
 	LASSERT(!do_recv || msg->msg_rx_delayed);
 
 	if (!msg->msg_peerrtrcredit) {
-		LASSERT ((lp->lp_rtrcredits < 0) ==
+		LASSERT((lp->lp_rtrcredits < 0) ==
 			 !list_empty(&lp->lp_rtrq));
 
 		msg->msg_peerrtrcredit = 1;
@@ -913,7 +914,7 @@
 	rbp = lnet_msg2bufpool(msg);
 
 	if (!msg->msg_rtrcredit) {
-		LASSERT ((rbp->rbp_credits < 0) ==
+		LASSERT((rbp->rbp_credits < 0) ==
 			 !list_empty(&rbp->rbp_msgs));
 
 		msg->msg_rtrcredit = 1;
@@ -930,7 +931,7 @@
 		}
 	}
 
-	LASSERT (!list_empty(&rbp->rbp_bufs));
+	LASSERT(!list_empty(&rbp->rbp_bufs));
 	rb = list_entry(rbp->rbp_bufs.next, lnet_rtrbuf_t, rb_list);
 	list_del(&rb->rb_list);
 
@@ -985,7 +986,7 @@
 			!list_empty(&txpeer->lp_txq));
 
 		txpeer->lp_txqnob -= msg->msg_len + sizeof(lnet_hdr_t);
-		LASSERT (txpeer->lp_txqnob >= 0);
+		LASSERT(txpeer->lp_txqnob >= 0);
 
 		txpeer->lp_txcredits++;
 		if (txpeer->lp_txcredits <= 0) {
@@ -1020,11 +1021,11 @@
 		/* NB If a msg ever blocks for a buffer in rbp_msgs, it stays
 		 * there until it gets one allocated, or aborts the wait
 		 * itself */
-		LASSERT (msg->msg_kiov != NULL);
+		LASSERT(msg->msg_kiov != NULL);
 
 		rb = list_entry(msg->msg_kiov, lnet_rtrbuf_t, rb_kiov[0]);
 		rbp = rb->rb_pool;
-		LASSERT (rbp == lnet_msg2bufpool(msg));
+		LASSERT(rbp == lnet_msg2bufpool(msg));
 
 		msg->msg_kiov = NULL;
 		msg->msg_rtrcredit = 0;
@@ -1172,10 +1173,10 @@
 	 * but we might want to use pre-determined router for ACK/REPLY
 	 * in the future */
 	/* NB: ni != NULL == interface pre-determined (ACK/REPLY) */
-	LASSERT (msg->msg_txpeer == NULL);
-	LASSERT (!msg->msg_sending);
-	LASSERT (!msg->msg_target_is_router);
-	LASSERT (!msg->msg_receiving);
+	LASSERT(msg->msg_txpeer == NULL);
+	LASSERT(!msg->msg_sending);
+	LASSERT(!msg->msg_target_is_router);
+	LASSERT(!msg->msg_receiving);
 
 	msg->msg_sending = 1;
 
@@ -1200,7 +1201,7 @@
 				      libcfs_nid2str(src_nid));
 			return -EINVAL;
 		}
-		LASSERT (!msg->msg_routing);
+		LASSERT(!msg->msg_routing);
 	}
 
 	/* Is this for someone on a local network? */
@@ -1249,7 +1250,7 @@
 			/* ENOMEM or shutting down */
 			return rc;
 		}
-		LASSERT (lp->lp_ni == src_ni);
+		LASSERT(lp->lp_ni == src_ni);
 	} else {
 		/* sending to a remote network */
 		lp = lnet_find_route_locked(src_ni, dst_nid, rtr_nid);
@@ -1290,7 +1291,7 @@
 			src_ni = lp->lp_ni;
 			src_nid = src_ni->ni_nid;
 		} else {
-			LASSERT (src_ni == lp->lp_ni);
+			LASSERT(src_ni == lp->lp_ni);
 			lnet_ni_decref_locked(src_ni, cpt);
 		}
 
@@ -1311,9 +1312,9 @@
 
 	/* 'lp' is our best choice of peer */
 
-	LASSERT (!msg->msg_peertxcredit);
-	LASSERT (!msg->msg_txcredit);
-	LASSERT (msg->msg_txpeer == NULL);
+	LASSERT(!msg->msg_peertxcredit);
+	LASSERT(!msg->msg_txcredit);
+	LASSERT(msg->msg_txpeer == NULL);
 
 	msg->msg_txpeer = lp;		   /* msg takes my ref on lp */
 
@@ -1509,7 +1510,7 @@
 		return ENOENT;		  /* +ve: OK but no match */
 	}
 
-	LASSERT (md->md_offset == 0);
+	LASSERT(md->md_offset == 0);
 
 	rlength = hdr->payload_length;
 	mlength = MIN(rlength, (int)md->md_length);
@@ -1614,31 +1615,31 @@
 }
 
 char *
-lnet_msgtyp2str (int type)
+lnet_msgtyp2str(int type)
 {
 	switch (type) {
 	case LNET_MSG_ACK:
-		return ("ACK");
+		return "ACK";
 	case LNET_MSG_PUT:
-		return ("PUT");
+		return "PUT";
 	case LNET_MSG_GET:
-		return ("GET");
+		return "GET";
 	case LNET_MSG_REPLY:
-		return ("REPLY");
+		return "REPLY";
 	case LNET_MSG_HELLO:
-		return ("HELLO");
+		return "HELLO";
 	default:
-		return ("<UNKNOWN>");
+		return "<UNKNOWN>";
 	}
 }
 EXPORT_SYMBOL(lnet_msgtyp2str);
 
 void
-lnet_print_hdr(lnet_hdr_t * hdr)
+lnet_print_hdr(lnet_hdr_t *hdr)
 {
 	lnet_process_id_t src = {0};
 	lnet_process_id_t dst = {0};
-	char *type_str = lnet_msgtyp2str (hdr->type);
+	char *type_str = lnet_msgtyp2str(hdr->type);
 
 	src.nid = hdr->src_nid;
 	src.pid = hdr->src_pid;
@@ -1709,7 +1710,7 @@
 	__u32	  payload_length;
 	__u32	  type;
 
-	LASSERT (!in_interrupt ());
+	LASSERT(!in_interrupt());
 
 	type = le32_to_cpu(hdr->type);
 	src_nid = le64_to_cpu(hdr->src_nid);
@@ -1734,7 +1735,8 @@
 
 	case LNET_MSG_PUT:
 	case LNET_MSG_REPLY:
-		if (payload_length > (__u32)(for_me ? LNET_MAX_PAYLOAD : LNET_MTU)) {
+		if (payload_length >
+		   (__u32)(for_me ? LNET_MAX_PAYLOAD : LNET_MTU)) {
 			CERROR("%s, src %s: bad %s payload %d "
 			       "(%d max expected)\n",
 			       libcfs_nid2str(from_nid),
@@ -1772,7 +1774,7 @@
 	if (!for_me) {
 		if (LNET_NIDNET(dest_nid) == LNET_NIDNET(ni->ni_nid)) {
 			/* should have gone direct */
-			CERROR ("%s, src %s: Bad dest nid %s "
+			CERROR("%s, src %s: Bad dest nid %s "
 				"(should have been sent direct)\n",
 				libcfs_nid2str(from_nid),
 				libcfs_nid2str(src_nid),
@@ -1783,7 +1785,7 @@
 		if (lnet_islocalnid(dest_nid)) {
 			/* dest is another local NI; sender should have used
 			 * this node's NID on its own network */
-			CERROR ("%s, src %s: Bad dest nid %s "
+			CERROR("%s, src %s: Bad dest nid %s "
 				"(it's my nid but on a different network)\n",
 				libcfs_nid2str(from_nid),
 				libcfs_nid2str(src_nid),
@@ -1792,7 +1794,7 @@
 		}
 
 		if (rdma_req && type == LNET_MSG_GET) {
-			CERROR ("%s, src %s: Bad optimized GET for %s "
+			CERROR("%s, src %s: Bad optimized GET for %s "
 				"(final destination must be me)\n",
 				libcfs_nid2str(from_nid),
 				libcfs_nid2str(src_nid),
@@ -1801,7 +1803,7 @@
 		}
 
 		if (!the_lnet.ln_routing) {
-			CERROR ("%s, src %s: Dropping message for %s "
+			CERROR("%s, src %s: Dropping message for %s "
 				"(routing not enabled)\n",
 				libcfs_nid2str(from_nid),
 				libcfs_nid2str(src_nid),
@@ -1813,9 +1815,8 @@
 	/* Message looks OK; we're not going to return an error, so we MUST
 	 * call back lnd_recv() come what may... */
 
-	if (!list_empty (&the_lnet.ln_test_peers) && /* normally we don't */
-	    fail_peer (src_nid, 0))	     /* shall we now? */
-	{
+	if (!list_empty(&the_lnet.ln_test_peers) && /* normally we don't */
+	    fail_peer(src_nid, 0)) {	     /* shall we now? */
 		CERROR("%s, src %s: Dropping %s to simulate failure\n",
 		       libcfs_nid2str(from_nid), libcfs_nid2str(src_nid),
 		       lnet_msgtyp2str(type));
@@ -1830,7 +1831,9 @@
 		goto drop;
 	}
 
-	/* msg zeroed in lnet_msg_alloc; i.e. flags all clear, pointers NULL etc */
+	/* msg zeroed in lnet_msg_alloc;
+	 * i.e. flags all clear, pointers NULL etc
+	 */
 
 	msg->msg_type = type;
 	msg->msg_private = private;
@@ -1906,7 +1909,7 @@
 	if (rc == 0)
 		return 0;
 
-	LASSERT (rc == ENOENT);
+	LASSERT(rc == ENOENT);
 
  free_drop:
 	LASSERT(msg->msg_md == NULL);
@@ -2047,12 +2050,11 @@
 	int			cpt;
 	int			rc;
 
-	LASSERT (the_lnet.ln_init);
-	LASSERT (the_lnet.ln_refcount > 0);
+	LASSERT(the_lnet.ln_init);
+	LASSERT(the_lnet.ln_refcount > 0);
 
-	if (!list_empty (&the_lnet.ln_test_peers) && /* normally we don't */
-	    fail_peer (target.nid, 1))	  /* shall we now? */
-	{
+	if (!list_empty(&the_lnet.ln_test_peers) && /* normally we don't */
+	    fail_peer(target.nid, 1)) { /* shall we now? */
 		CERROR("Dropping PUT to %s: simulated failure\n",
 		       libcfs_id2str(target));
 		return -EIO;
@@ -2113,9 +2115,9 @@
 
 	rc = lnet_send(self, msg, LNET_NID_ANY);
 	if (rc != 0) {
-		CNETERR( "Error sending PUT to %s: %d\n",
+		CNETERR("Error sending PUT to %s: %d\n",
 		       libcfs_id2str(target), rc);
-		lnet_finalize (NULL, msg, rc);
+		lnet_finalize(NULL, msg, rc);
 	}
 
 	/* completion will be signalled by an event */
@@ -2124,7 +2126,7 @@
 EXPORT_SYMBOL(LNetPut);
 
 lnet_msg_t *
-lnet_create_reply_msg (lnet_ni_t *ni, lnet_msg_t *getmsg)
+lnet_create_reply_msg(lnet_ni_t *ni, lnet_msg_t *getmsg)
 {
 	/* The LND can DMA direct to the GET md (i.e. no REPLY msg).  This
 	 * returns a msg for the LND to pass to lnet_finalize() when the sink
@@ -2144,16 +2146,16 @@
 	cpt = lnet_cpt_of_cookie(getmd->md_lh.lh_cookie);
 	lnet_res_lock(cpt);
 
-	LASSERT (getmd->md_refcount > 0);
+	LASSERT(getmd->md_refcount > 0);
 
 	if (msg == NULL) {
-		CERROR ("%s: Dropping REPLY from %s: can't allocate msg\n",
+		CERROR("%s: Dropping REPLY from %s: can't allocate msg\n",
 			libcfs_nid2str(ni->ni_nid), libcfs_id2str(peer_id));
 		goto drop;
 	}
 
 	if (getmd->md_threshold == 0) {
-		CERROR ("%s: Dropping REPLY from %s for inactive MD %p\n",
+		CERROR("%s: Dropping REPLY from %s for inactive MD %p\n",
 			libcfs_nid2str(ni->ni_nid), libcfs_id2str(peer_id),
 			getmd);
 		lnet_res_unlock(cpt);
@@ -2205,13 +2207,13 @@
 {
 	/* Set the REPLY length, now the RDMA that elides the REPLY message has
 	 * completed and I know it. */
-	LASSERT (reply != NULL);
-	LASSERT (reply->msg_type == LNET_MSG_GET);
-	LASSERT (reply->msg_ev.type == LNET_EVENT_REPLY);
+	LASSERT(reply != NULL);
+	LASSERT(reply->msg_type == LNET_MSG_GET);
+	LASSERT(reply->msg_ev.type == LNET_EVENT_REPLY);
 
 	/* NB I trusted my peer to RDMA.  If she tells me she's written beyond
 	 * the end of my buffer, I might as well be dead. */
-	LASSERT (len <= reply->msg_ev.mlength);
+	LASSERT(len <= reply->msg_ev.mlength);
 
 	reply->msg_ev.mlength = len;
 }
@@ -2229,7 +2231,8 @@
  *
  * \param self,target,portal,match_bits,offset See the discussion in LNetPut().
  * \param mdh A handle for the MD that describes the memory into which the
- * requested data will be received. The MD must be "free floating" (See LNetMDBind()).
+ * requested data will be received. The MD must be "free floating"
+ * (See LNetMDBind()).
  *
  * \retval  0      Success, and only in this case events will be generated
  * and logged to EQ (if it exists) of the MD.
@@ -2247,12 +2250,11 @@
 	int			cpt;
 	int			rc;
 
-	LASSERT (the_lnet.ln_init);
-	LASSERT (the_lnet.ln_refcount > 0);
+	LASSERT(the_lnet.ln_init);
+	LASSERT(the_lnet.ln_refcount > 0);
 
-	if (!list_empty (&the_lnet.ln_test_peers) && /* normally we don't */
-	    fail_peer (target.nid, 1))	  /* shall we now? */
-	{
+	if (!list_empty(&the_lnet.ln_test_peers) && /* normally we don't */
+	    fail_peer(target.nid, 1)) {	  /* shall we now? */
 		CERROR("Dropping GET to %s: simulated failure\n",
 		       libcfs_id2str(target));
 		return -EIO;
@@ -2307,9 +2309,9 @@
 
 	rc = lnet_send(self, msg, LNET_NID_ANY);
 	if (rc < 0) {
-		CNETERR( "Error sending GET to %s: %d\n",
+		CNETERR("Error sending GET to %s: %d\n",
 		       libcfs_id2str(target), rc);
-		lnet_finalize (NULL, msg, rc);
+		lnet_finalize(NULL, msg, rc);
 	}
 
 	/* completion will be signalled by an event */
@@ -2348,12 +2350,12 @@
 	 * keep order 0 free for 0@lo and order 1 free for a local NID
 	 * match */
 
-	LASSERT (the_lnet.ln_init);
-	LASSERT (the_lnet.ln_refcount > 0);
+	LASSERT(the_lnet.ln_init);
+	LASSERT(the_lnet.ln_refcount > 0);
 
 	cpt = lnet_net_lock_current();
 
-	list_for_each (e, &the_lnet.ln_nis) {
+	list_for_each(e, &the_lnet.ln_nis) {
 		ni = list_entry(e, lnet_ni_t, ni_list);
 
 		if (ni->ni_nid == dstnid) {
@@ -2390,7 +2392,7 @@
 			lnet_route_t *route;
 			lnet_route_t *shortest = NULL;
 
-			LASSERT (!list_empty(&rnet->lrn_routes));
+			LASSERT(!list_empty(&rnet->lrn_routes));
 
 			list_for_each_entry(route, &rnet->lrn_routes,
 						lr_list) {
@@ -2399,7 +2401,7 @@
 					shortest = route;
 			}
 
-			LASSERT (shortest != NULL);
+			LASSERT(shortest != NULL);
 			hops = shortest->lr_hops;
 			if (srcnidp != NULL)
 				*srcnidp = shortest->lr_gateway->lp_ni->ni_nid;
diff --git a/drivers/staging/lustre/lnet/lnet/lo.c b/drivers/staging/lustre/lnet/lnet/lo.c
index 670dae3..efc798e 100644
--- a/drivers/staging/lustre/lnet/lnet/lo.c
+++ b/drivers/staging/lustre/lnet/lnet/lo.c
@@ -36,16 +36,16 @@
 #include <linux/lnet/lib-lnet.h>
 
 int
-lolnd_send (lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg)
+lolnd_send(lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg)
 {
-	LASSERT (!lntmsg->msg_routing);
-	LASSERT (!lntmsg->msg_target_is_router);
+	LASSERT(!lntmsg->msg_routing);
+	LASSERT(!lntmsg->msg_target_is_router);
 
 	return lnet_parse(ni, &lntmsg->msg_hdr, ni->ni_nid, lntmsg, 0);
 }
 
 int
-lolnd_recv (lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg,
+lolnd_recv(lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg,
 	    int delayed, unsigned int niov,
 	    struct iovec *iov, lnet_kiov_t *kiov,
 	    unsigned int offset, unsigned int mlen, unsigned int rlen)
@@ -89,20 +89,20 @@
 void
 lolnd_shutdown(lnet_ni_t *ni)
 {
-	CDEBUG (D_NET, "shutdown\n");
-	LASSERT (lolnd_instanced);
+	CDEBUG(D_NET, "shutdown\n");
+	LASSERT(lolnd_instanced);
 
 	lolnd_instanced = 0;
 }
 
 int
-lolnd_startup (lnet_ni_t *ni)
+lolnd_startup(lnet_ni_t *ni)
 {
-	LASSERT (ni->ni_lnd == &the_lolnd);
-	LASSERT (!lolnd_instanced);
+	LASSERT(ni->ni_lnd == &the_lolnd);
+	LASSERT(!lolnd_instanced);
 	lolnd_instanced = 1;
 
-	return (0);
+	return 0;
 }
 
 lnd_t the_lolnd = {
diff --git a/drivers/staging/lustre/lnet/lnet/module.c b/drivers/staging/lustre/lnet/lnet/module.c
index afb8175..6db8774 100644
--- a/drivers/staging/lustre/lnet/lnet/module.c
+++ b/drivers/staging/lustre/lnet/lnet/module.c
@@ -37,14 +37,14 @@
 #define DEBUG_SUBSYSTEM S_LNET
 #include <linux/lnet/lib-lnet.h>
 
-static int config_on_load = 0;
+static int config_on_load;
 CFS_MODULE_PARM(config_on_load, "i", int, 0444,
 		"configure network at module load");
 
 static struct mutex lnet_config_mutex;
 
 int
-lnet_configure (void *arg)
+lnet_configure(void *arg)
 {
 	/* 'arg' only there so I can be passed to cfs_create_thread() */
 	int    rc = 0;
@@ -64,7 +64,7 @@
 }
 
 int
-lnet_unconfigure (void)
+lnet_unconfigure(void)
 {
 	int   refcount;
 
@@ -124,7 +124,7 @@
 	}
 
 	rc = libcfs_register_ioctl(&lnet_ioctl_handler);
-	LASSERT (rc == 0);
+	LASSERT(rc == 0);
 
 	if (config_on_load) {
 		/* Have to schedule a separate thread to avoid deadlocking
@@ -141,7 +141,7 @@
 	int rc;
 
 	rc = libcfs_deregister_ioctl(&lnet_ioctl_handler);
-	LASSERT (rc == 0);
+	LASSERT(rc == 0);
 
 	LNetFini();
 }
diff --git a/drivers/staging/lustre/lnet/lnet/router_proc.c b/drivers/staging/lustre/lnet/lnet/router_proc.c
index 931f6ca2..5e47de3 100644
--- a/drivers/staging/lustre/lnet/lnet/router_proc.c
+++ b/drivers/staging/lustre/lnet/lnet/router_proc.c
@@ -30,7 +30,7 @@
 /* This is really lnet_proc.c. You might need to update sanity test 215
  * if any file format is changed. */
 
-static ctl_table_header_t *lnet_table_header = NULL;
+static ctl_table_header_t *lnet_table_header;
 
 #define CTL_LNET	 (0x100)
 enum {
@@ -158,7 +158,7 @@
 	off = LNET_PROC_HOFF_GET(*ppos);
 	ver = LNET_PROC_VER_GET(*ppos);
 
-	LASSERT (!write);
+	LASSERT(!write);
 
 	if (*lenp == 0)
 		return 0;
@@ -172,11 +172,11 @@
 	if (*ppos == 0) {
 		s += snprintf(s, tmpstr + tmpsiz - s, "Routing %s\n",
 			      the_lnet.ln_routing ? "enabled" : "disabled");
-		LASSERT (tmpstr + tmpsiz - s > 0);
+		LASSERT(tmpstr + tmpsiz - s > 0);
 
 		s += snprintf(s, tmpstr + tmpsiz - s, "%-8s %4s %7s %s\n",
 			      "net", "hops", "state", "router");
-		LASSERT (tmpstr + tmpsiz - s > 0);
+		LASSERT(tmpstr + tmpsiz - s > 0);
 
 		lnet_net_lock(0);
 		ver = (unsigned int)the_lnet.ln_remote_nets_version;
@@ -281,7 +281,7 @@
 	off = LNET_PROC_HOFF_GET(*ppos);
 	ver = LNET_PROC_VER_GET(*ppos);
 
-	LASSERT (!write);
+	LASSERT(!write);
 
 	if (*lenp == 0)
 		return 0;
@@ -375,7 +375,7 @@
 					      pingsent,
 					      cfs_duration_sec(cfs_time_sub(deadline, now)),
 					      down_ni, libcfs_nid2str(nid));
-			LASSERT (tmpstr + tmpsiz - s > 0);
+			LASSERT(tmpstr + tmpsiz - s > 0);
 		}
 
 		lnet_net_unlock(0);
@@ -437,7 +437,7 @@
 			      "%-24s %4s %5s %5s %5s %5s %5s %5s %5s %s\n",
 			      "nid", "refs", "state", "last", "max",
 			      "rtr", "min", "tx", "min", "queue");
-		LASSERT (tmpstr + tmpsiz - s > 0);
+		LASSERT(tmpstr + tmpsiz - s > 0);
 
 		hoff++;
 	} else {
@@ -534,7 +534,7 @@
 				      libcfs_nid2str(nid), nrefs, aliveness,
 				      lastalive, maxcr, rtrcr, minrtrcr, txcr,
 				      mintxcr, txqnob);
-			LASSERT (tmpstr + tmpsiz - s > 0);
+			LASSERT(tmpstr + tmpsiz - s > 0);
 
 		} else { /* peer is NULL */
 			lnet_net_unlock(cpt);
@@ -592,7 +592,7 @@
 	s += snprintf(s, tmpstr + tmpsiz - s,
 		      "%5s %5s %7s %7s\n",
 		      "pages", "count", "credits", "min");
-	LASSERT (tmpstr + tmpsiz - s > 0);
+	LASSERT(tmpstr + tmpsiz - s > 0);
 
 	if (the_lnet.ln_rtrpools == NULL)
 		goto out; /* I'm not a router */
@@ -638,7 +638,7 @@
 
 	DECLARE_LL_PROC_PPOS_DECL;
 
-	LASSERT (!write);
+	LASSERT(!write);
 
 	if (*lenp == 0)
 		return 0;
@@ -654,7 +654,7 @@
 			      "%-24s %6s %5s %4s %4s %4s %5s %5s %5s\n",
 			      "nid", "status", "alive", "refs", "peer",
 			      "rtr", "max", "tx", "min");
-		LASSERT (tmpstr + tmpsiz - s > 0);
+		LASSERT(tmpstr + tmpsiz - s > 0);
 	} else {
 		struct list_head	*n;
 		lnet_ni_t	 *ni   = NULL;
diff --git a/drivers/staging/lustre/lnet/selftest/brw_test.c b/drivers/staging/lustre/lnet/selftest/brw_test.c
index ef5064e..b7613c8 100644
--- a/drivers/staging/lustre/lnet/selftest/brw_test.c
+++ b/drivers/staging/lustre/lnet/selftest/brw_test.c
@@ -48,16 +48,17 @@
 		"# data errors to inject randomly, zero by default");
 
 static void
-brw_client_fini (sfw_test_instance_t *tsi)
+brw_client_fini(sfw_test_instance_t *tsi)
 {
 	srpc_bulk_t     *bulk;
 	sfw_test_unit_t *tsu;
 
-	LASSERT (tsi->tsi_is_client);
+	LASSERT(tsi->tsi_is_client);
 
-	list_for_each_entry (tsu, &tsi->tsi_units, tsu_list) {
+	list_for_each_entry(tsu, &tsi->tsi_units, tsu_list) {
 		bulk = tsu->tsu_private;
-		if (bulk == NULL) continue;
+		if (bulk == NULL)
+			continue;
 
 		srpc_free_bulk(bulk);
 		tsu->tsu_private = NULL;
@@ -65,7 +66,7 @@
 }
 
 int
-brw_client_init (sfw_test_instance_t *tsi)
+brw_client_init(sfw_test_instance_t *tsi)
 {
 	sfw_session_t	 *sn = tsi->tsi_batch->bat_session;
 	int		  flags;
@@ -130,28 +131,31 @@
 #define BRW_MSIZE       sizeof(__u64)
 
 int
-brw_inject_one_error (void)
+brw_inject_one_error(void)
 {
 	struct timeval tv;
 
-	if (brw_inject_errors <= 0) return 0;
+	if (brw_inject_errors <= 0)
+		return 0;
 
 	do_gettimeofday(&tv);
 
-	if ((tv.tv_usec & 1) == 0) return 0;
+	if ((tv.tv_usec & 1) == 0)
+		return 0;
 
 	return brw_inject_errors--;
 }
 
 void
-brw_fill_page (struct page *pg, int pattern, __u64 magic)
+brw_fill_page(struct page *pg, int pattern, __u64 magic)
 {
 	char *addr = page_address(pg);
 	int   i;
 
-	LASSERT (addr != NULL);
+	LASSERT(addr != NULL);
 
-	if (pattern == LST_BRW_CHECK_NONE) return;
+	if (pattern == LST_BRW_CHECK_NONE)
+		return;
 
 	if (magic == BRW_MAGIC)
 		magic += brw_inject_one_error();
@@ -169,29 +173,31 @@
 		return;
 	}
 
-	LBUG ();
+	LBUG();
 	return;
 }
 
 int
-brw_check_page (struct page *pg, int pattern, __u64 magic)
+brw_check_page(struct page *pg, int pattern, __u64 magic)
 {
 	char  *addr = page_address(pg);
 	__u64  data = 0; /* make compiler happy */
 	int    i;
 
-	LASSERT (addr != NULL);
+	LASSERT(addr != NULL);
 
 	if (pattern == LST_BRW_CHECK_NONE)
 		return 0;
 
 	if (pattern == LST_BRW_CHECK_SIMPLE) {
 		data = *((__u64 *) addr);
-		if (data != magic) goto bad_data;
+		if (data != magic)
+			goto bad_data;
 
 		addr += PAGE_CACHE_SIZE - BRW_MSIZE;
 		data = *((__u64 *) addr);
-		if (data != magic) goto bad_data;
+		if (data != magic)
+			goto bad_data;
 
 		return 0;
 	}
@@ -199,22 +205,23 @@
 	if (pattern == LST_BRW_CHECK_FULL) {
 		for (i = 0; i < PAGE_CACHE_SIZE / BRW_MSIZE; i++) {
 			data = *(((__u64 *) addr) + i);
-			if (data != magic) goto bad_data;
+			if (data != magic)
+				goto bad_data;
 		}
 
 		return 0;
 	}
 
-	LBUG ();
+	LBUG();
 
 bad_data:
-	CERROR ("Bad data in page %p: "LPX64", "LPX64" expected\n",
+	CERROR("Bad data in page %p: "LPX64", "LPX64" expected\n",
 		pg, data, magic);
 	return 1;
 }
 
 void
-brw_fill_bulk (srpc_bulk_t *bk, int pattern, __u64 magic)
+brw_fill_bulk(srpc_bulk_t *bk, int pattern, __u64 magic)
 {
 	int	 i;
 	struct page *pg;
@@ -226,7 +233,7 @@
 }
 
 int
-brw_check_bulk (srpc_bulk_t *bk, int pattern, __u64 magic)
+brw_check_bulk(srpc_bulk_t *bk, int pattern, __u64 magic)
 {
 	int	 i;
 	struct page *pg;
@@ -234,7 +241,7 @@
 	for (i = 0; i < bk->bk_niov; i++) {
 		pg = bk->bk_iovs[i].kiov_page;
 		if (brw_check_page(pg, pattern, magic) != 0) {
-			CERROR ("Bulk page %p (%d/%d) is corrupted!\n",
+			CERROR("Bulk page %p (%d/%d) is corrupted!\n",
 				pg, i, bk->bk_niov);
 			return 1;
 		}
@@ -244,7 +251,7 @@
 }
 
 static int
-brw_client_prep_rpc (sfw_test_unit_t *tsu,
+brw_client_prep_rpc(sfw_test_unit_t *tsu,
 		     lnet_process_id_t dest, srpc_client_rpc_t **rpcpp)
 {
 	srpc_bulk_t	 *bulk = tsu->tsu_private;
@@ -302,7 +309,7 @@
 }
 
 static void
-brw_client_done_rpc (sfw_test_unit_t *tsu, srpc_client_rpc_t *rpc)
+brw_client_done_rpc(sfw_test_unit_t *tsu, srpc_client_rpc_t *rpc)
 {
 	__u64		magic = BRW_MAGIC;
 	sfw_test_instance_t *tsi = tsu->tsu_instance;
@@ -311,10 +318,10 @@
 	srpc_brw_reply_t    *reply = &msg->msg_body.brw_reply;
 	srpc_brw_reqst_t    *reqst = &rpc->crpc_reqstmsg.msg_body.brw_reqst;
 
-	LASSERT (sn != NULL);
+	LASSERT(sn != NULL);
 
 	if (rpc->crpc_status != 0) {
-		CERROR ("BRW RPC to %s failed with %d\n",
+		CERROR("BRW RPC to %s failed with %d\n",
 			libcfs_id2str(rpc->crpc_dest), rpc->crpc_status);
 		if (!tsi->tsi_stopping) /* rpc could have been aborted */
 			atomic_inc(&sn->sn_brw_errors);
@@ -326,7 +333,7 @@
 		__swab32s(&reply->brw_status);
 	}
 
-	CDEBUG (reply->brw_status ? D_WARNING : D_NET,
+	CDEBUG(reply->brw_status ? D_WARNING : D_NET,
 		"BRW RPC to %s finished with brw_status: %d\n",
 		libcfs_id2str(rpc->crpc_dest), reply->brw_status);
 
@@ -336,10 +343,11 @@
 		goto out;
 	}
 
-	if (reqst->brw_rw == LST_BRW_WRITE) goto out;
+	if (reqst->brw_rw == LST_BRW_WRITE)
+		goto out;
 
 	if (brw_check_bulk(&rpc->crpc_bulk, reqst->brw_flags, magic) != 0) {
-		CERROR ("Bulk data from %s is corrupted!\n",
+		CERROR("Bulk data from %s is corrupted!\n",
 			libcfs_id2str(rpc->crpc_dest));
 		atomic_inc(&sn->sn_brw_errors);
 		rpc->crpc_status = -EBADMSG;
@@ -350,18 +358,19 @@
 }
 
 void
-brw_server_rpc_done (srpc_server_rpc_t *rpc)
+brw_server_rpc_done(srpc_server_rpc_t *rpc)
 {
 	srpc_bulk_t *blk = rpc->srpc_bulk;
 
-	if (blk == NULL) return;
+	if (blk == NULL)
+		return;
 
 	if (rpc->srpc_status != 0)
-		CERROR ("Bulk transfer %s %s has failed: %d\n",
+		CERROR("Bulk transfer %s %s has failed: %d\n",
 			blk->bk_sink ? "from" : "to",
 			libcfs_id2str(rpc->srpc_peer), rpc->srpc_status);
 	else
-		CDEBUG (D_NET, "Transferred %d pages bulk data %s %s\n",
+		CDEBUG(D_NET, "Transferred %d pages bulk data %s %s\n",
 			blk->bk_niov, blk->bk_sink ? "from" : "to",
 			libcfs_id2str(rpc->srpc_peer));
 
@@ -369,21 +378,21 @@
 }
 
 int
-brw_bulk_ready (srpc_server_rpc_t *rpc, int status)
+brw_bulk_ready(srpc_server_rpc_t *rpc, int status)
 {
 	__u64	     magic = BRW_MAGIC;
 	srpc_brw_reply_t *reply = &rpc->srpc_replymsg.msg_body.brw_reply;
 	srpc_brw_reqst_t *reqst;
 	srpc_msg_t       *reqstmsg;
 
-	LASSERT (rpc->srpc_bulk != NULL);
-	LASSERT (rpc->srpc_reqstbuf != NULL);
+	LASSERT(rpc->srpc_bulk != NULL);
+	LASSERT(rpc->srpc_reqstbuf != NULL);
 
 	reqstmsg = &rpc->srpc_reqstbuf->buf_msg;
 	reqst = &reqstmsg->msg_body.brw_reqst;
 
 	if (status != 0) {
-		CERROR ("BRW bulk %s failed for RPC from %s: %d\n",
+		CERROR("BRW bulk %s failed for RPC from %s: %d\n",
 			reqst->brw_rw == LST_BRW_READ ? "READ" : "WRITE",
 			libcfs_id2str(rpc->srpc_peer), status);
 		return -EIO;
@@ -396,7 +405,7 @@
 		__swab64s(&magic);
 
 	if (brw_check_bulk(rpc->srpc_bulk, reqst->brw_flags, magic) != 0) {
-		CERROR ("Bulk data from %s is corrupted!\n",
+		CERROR("Bulk data from %s is corrupted!\n",
 			libcfs_id2str(rpc->srpc_peer));
 		reply->brw_status = EBADMSG;
 	}
@@ -415,10 +424,10 @@
 	int		  npg;
 	int	       rc;
 
-	LASSERT (sv->sv_id == SRPC_SERVICE_BRW);
+	LASSERT(sv->sv_id == SRPC_SERVICE_BRW);
 
 	if (reqstmsg->msg_magic != SRPC_MSG_MAGIC) {
-		LASSERT (reqstmsg->msg_magic == __swab32(SRPC_MSG_MAGIC));
+		LASSERT(reqstmsg->msg_magic == __swab32(SRPC_MSG_MAGIC));
 
 		__swab32s(&reqst->brw_rw);
 		__swab32s(&reqst->brw_len);
@@ -426,7 +435,7 @@
 		__swab64s(&reqst->brw_rpyid);
 		__swab64s(&reqst->brw_bulkid);
 	}
-	LASSERT (reqstmsg->msg_type == (__u32)srpc_service2request(sv->sv_id));
+	LASSERT(reqstmsg->msg_type == (__u32)srpc_service2request(sv->sv_id));
 
 	reply->brw_status = 0;
 	rpc->srpc_done = brw_server_rpc_done;
diff --git a/drivers/staging/lustre/lnet/selftest/conrpc.c b/drivers/staging/lustre/lnet/selftest/conrpc.c
index cbce662..9a52f25 100644
--- a/drivers/staging/lustre/lnet/selftest/conrpc.c
+++ b/drivers/staging/lustre/lnet/selftest/conrpc.c
@@ -75,7 +75,7 @@
 
 	if (crpc->crp_stamp == 0) {
 		/* not aborted */
-		LASSERT (crpc->crp_status == 0);
+		LASSERT(crpc->crp_status == 0);
 
 		crpc->crp_stamp  = cfs_time_current();
 		crpc->crp_status = rpc->crpc_status;
@@ -153,7 +153,7 @@
 	srpc_bulk_t *bulk = &crpc->crp_rpc->crpc_bulk;
 	int	  i;
 
-	LASSERT (list_empty(&crpc->crp_link));
+	LASSERT(list_empty(&crpc->crp_link));
 
 	for (i = 0; i < bulk->bk_niov; i++) {
 		if (bulk->bk_iovs[i].kiov_page == NULL)
@@ -187,7 +187,7 @@
 {
 	lstcon_rpc_trans_t *trans = crpc->crp_trans;
 
-	LASSERT (trans != NULL);
+	LASSERT(trans != NULL);
 
 	atomic_inc(&trans->tas_remaining);
 	crpc->crp_posted = 1;
@@ -289,7 +289,7 @@
 	lstcon_rpc_t      *crpc;
 	lstcon_node_t     *nd;
 
-	list_for_each_entry (crpc, &trans->tas_rpcs_list, crp_link) {
+	list_for_each_entry(crpc, &trans->tas_rpcs_list, crp_link) {
 		rpc = crpc->crp_rpc;
 
 		spin_lock(&rpc->crpc_lock);
@@ -330,7 +330,7 @@
 	    !list_empty(&trans->tas_olink)) /* Not an end session RPC */
 		return 1;
 
-	return (atomic_read(&trans->tas_remaining) == 0) ? 1: 0;
+	return (atomic_read(&trans->tas_remaining) == 0) ? 1 : 0;
 }
 
 int
@@ -349,8 +349,8 @@
 	       lstcon_rpc_trans_name(trans->tas_opc));
 
 	/* post all requests */
-	list_for_each_entry (crpc, &trans->tas_rpcs_list, crp_link) {
-		LASSERT (!crpc->crp_posted);
+	list_for_each_entry(crpc, &trans->tas_rpcs_list, crp_link) {
+		LASSERT(!crpc->crp_posted);
 
 		lstcon_rpc_post(crpc);
 	}
@@ -390,8 +390,8 @@
 	srpc_client_rpc_t    *rpc = crpc->crp_rpc;
 	srpc_generic_reply_t *rep;
 
-	LASSERT (nd != NULL && rpc != NULL);
-	LASSERT (crpc->crp_stamp != 0);
+	LASSERT(nd != NULL && rpc != NULL);
+	LASSERT(crpc->crp_stamp != 0);
 
 	if (crpc->crp_status != 0) {
 		*msgpp = NULL;
@@ -427,14 +427,14 @@
 	srpc_msg_t	*rep;
 	int		error;
 
-	LASSERT (stat != NULL);
+	LASSERT(stat != NULL);
 
 	memset(stat, 0, sizeof(*stat));
 
 	list_for_each_entry(crpc, &trans->tas_rpcs_list, crp_link) {
 		lstcon_rpc_stat_total(stat, 1);
 
-		LASSERT (crpc->crp_stamp != 0);
+		LASSERT(crpc->crp_stamp != 0);
 
 		error = lstcon_rpc_get_reply(crpc, &rep);
 		if (error != 0) {
@@ -455,8 +455,7 @@
 		      lstcon_session_feats_check(trans->tas_features);
 	}
 
-	CDEBUG(D_NET, "transaction %s : success %d, failure %d, total %d, "
-		      "RPC error(%d), Framework error(%d)\n",
+	CDEBUG(D_NET, "transaction %s : success %d, failure %d, total %d, RPC error(%d), Framework error(%d)\n",
 	       lstcon_rpc_trans_name(trans->tas_opc),
 	       lstcon_rpc_stat_success(stat, 0),
 	       lstcon_rpc_stat_failure(stat, 0),
@@ -482,7 +481,7 @@
 	struct timeval	tv;
 	int		   error;
 
-	LASSERT (head_up != NULL);
+	LASSERT(head_up != NULL);
 
 	next = head_up;
 
@@ -498,7 +497,7 @@
 
 		ent = list_entry(next, lstcon_rpc_ent_t, rpe_link);
 
-		LASSERT (crpc->crp_stamp != 0);
+		LASSERT(crpc->crp_stamp != 0);
 
 		error = lstcon_rpc_get_reply(crpc, &msg);
 
@@ -532,7 +531,9 @@
 		if (readent == NULL)
 			continue;
 
-		if ((error = readent(trans->tas_opc, msg, ent)) != 0)
+		error = readent(trans->tas_opc, msg, ent);
+
+		if (error != 0)
 			return error;
 	}
 
@@ -568,19 +569,19 @@
 		 * user wait for them, just abandon them, they will be recycled
 		 * in callback */
 
-		LASSERT (crpc->crp_status != 0);
+		LASSERT(crpc->crp_status != 0);
 
 		crpc->crp_node  = NULL;
 		crpc->crp_trans = NULL;
 		list_del_init(&crpc->crp_link);
-		count ++;
+		count++;
 
 		spin_unlock(&rpc->crpc_lock);
 
 		atomic_dec(&trans->tas_remaining);
 	}
 
-	LASSERT (atomic_read(&trans->tas_remaining) == 0);
+	LASSERT(atomic_read(&trans->tas_remaining) == 0);
 
 	list_del(&trans->tas_link);
 	if (!list_empty(&trans->tas_olink))
@@ -669,14 +670,14 @@
 	brq->bar_bid     = tsb->tsb_id;
 	brq->bar_testidx = tsb->tsb_index;
 	brq->bar_opc     = transop == LST_TRANS_TSBRUN ? SRPC_BATCH_OPC_RUN :
-			   (transop == LST_TRANS_TSBSTOP ? SRPC_BATCH_OPC_STOP:
+			   (transop == LST_TRANS_TSBSTOP ? SRPC_BATCH_OPC_STOP :
 			    SRPC_BATCH_OPC_QUERY);
 
 	if (transop != LST_TRANS_TSBRUN &&
 	    transop != LST_TRANS_TSBSTOP)
 		return 0;
 
-	LASSERT (tsb->tsb_index == 0);
+	LASSERT(tsb->tsb_index == 0);
 
 	batch = (lstcon_batch_t *)tsb;
 	brq->bar_arg = batch->bat_arg;
@@ -710,7 +711,7 @@
 
 	i = idx / SFW_ID_PER_PAGE;
 
-	LASSERT (i < nkiov);
+	LASSERT(i < nkiov);
 
 	pid = (lnet_process_id_packed_t *)page_address(kiov[i].kiov_page);
 
@@ -728,9 +729,9 @@
 	int		       end;
 	int		       i = 0;
 
-	LASSERT (dist >= 1);
-	LASSERT (span >= 1);
-	LASSERT (grp->grp_nnode >= 1);
+	LASSERT(dist >= 1);
+	LASSERT(span >= 1);
+	LASSERT(grp->grp_nnode >= 1);
 
 	if (span > grp->grp_nnode)
 		return -EINVAL;
@@ -741,11 +742,11 @@
 	list_for_each_entry(ndl, &grp->grp_ndl_list, ndl_link) {
 		nd = ndl->ndl_node;
 		if (i < start) {
-			i ++;
+			i++;
 			continue;
 		}
 
-		if (i > (end >= start ? end: grp->grp_nnode))
+		if (i > (end >= start ? end : grp->grp_nnode))
 			break;
 
 		pid = lstcon_next_id((i - start), nkiov, kiov);
@@ -866,7 +867,7 @@
 
 		bulk->bk_sink = 0;
 
-		LASSERT (transop == LST_TRANS_TSBCLIADD);
+		LASSERT(transop == LST_TRANS_TSBCLIADD);
 
 		rc = lstcon_dstnodes_prep(test->tes_dst_grp,
 					  test->tes_cliidx++,
@@ -942,8 +943,7 @@
 	}
 
 	if (reply->msg_ses_feats != trans->tas_features) {
-		CNETERR("Framework features %x from %s is different with "
-			"features on this transaction: %x\n",
+		CNETERR("Framework features %x from %s is different with features on this transaction: %x\n",
 			 reply->msg_ses_feats, libcfs_nid2str(nd->nd_id.nid),
 			 trans->tas_features);
 		status = mksn_rep->mksn_status = EPROTO;
@@ -1107,8 +1107,8 @@
 			continue;
 
 		if (rc < 0) {
-			CDEBUG(D_NET, "Condition error while creating RPC "
-				      " for transaction %d: %d\n", transop, rc);
+			CDEBUG(D_NET, "Condition error while creating RPC for transaction %d: %d\n",
+					transop, rc);
 			break;
 		}
 
@@ -1193,7 +1193,7 @@
 
 	trans = console_session.ses_ping;
 
-	LASSERT (trans != NULL);
+	LASSERT(trans != NULL);
 
 	list_for_each_entry(ndl, &console_session.ses_ndl_list, ndl_link) {
 		nd = ndl->ndl_node;
@@ -1219,8 +1219,8 @@
 		crpc = &nd->nd_ping;
 
 		if (crpc->crp_rpc != NULL) {
-			LASSERT (crpc->crp_trans == trans);
-			LASSERT (!list_empty(&crpc->crp_link));
+			LASSERT(crpc->crp_trans == trans);
+			LASSERT(!list_empty(&crpc->crp_link));
 
 			spin_lock(&crpc->crp_rpc->crpc_lock);
 
@@ -1264,7 +1264,7 @@
 		lstcon_rpc_trans_addreq(trans, crpc);
 		lstcon_rpc_post(crpc);
 
-		count ++;
+		count++;
 	}
 
 	if (console_session.ses_expired) {
@@ -1286,8 +1286,8 @@
 	stt_timer_t    *ptimer;
 	int	     rc;
 
-	LASSERT (list_empty(&console_session.ses_rpc_freelist));
-	LASSERT (atomic_read(&console_session.ses_rpc_counter) == 0);
+	LASSERT(list_empty(&console_session.ses_rpc_freelist));
+	LASSERT(atomic_read(&console_session.ses_rpc_counter) == 0);
 
 	rc = lstcon_rpc_trans_prep(NULL, LST_TRANS_SESPING,
 				   &console_session.ses_ping);
@@ -1307,7 +1307,7 @@
 void
 lstcon_rpc_pinger_stop(void)
 {
-	LASSERT (console_session.ses_shutdown);
+	LASSERT(console_session.ses_shutdown);
 
 	stt_del_timer(&console_session.ses_ping_timer);
 
@@ -1330,7 +1330,7 @@
 
 	/* Called with hold of global mutex */
 
-	LASSERT (console_session.ses_shutdown);
+	LASSERT(console_session.ses_shutdown);
 
 	while (!list_empty(&console_session.ses_trans_list)) {
 		list_for_each(pacer, &console_session.ses_trans_list) {
@@ -1345,8 +1345,7 @@
 
 		mutex_unlock(&console_session.ses_mutex);
 
-		CWARN("Session is shutting down, "
-		      "waiting for termination of transactions\n");
+		CWARN("Session is shutting down, waiting for termination of transactions\n");
 		cfs_pause(cfs_time_seconds(1));
 
 		mutex_lock(&console_session.ses_mutex);
@@ -1356,8 +1355,7 @@
 
 	lst_wait_until((atomic_read(&console_session.ses_rpc_counter) == 0),
 		       console_session.ses_rpc_lock,
-		       "Network is not accessible or target is down, "
-		       "waiting for %d console RPCs to being recycled\n",
+		       "Network is not accessible or target is down, waiting for %d console RPCs to being recycled\n",
 		       atomic_read(&console_session.ses_rpc_counter));
 
 	list_add(&zlist, &console_session.ses_rpc_freelist);
@@ -1392,6 +1390,6 @@
 void
 lstcon_rpc_module_fini(void)
 {
-	LASSERT (list_empty(&console_session.ses_rpc_freelist));
-	LASSERT (atomic_read(&console_session.ses_rpc_counter) == 0);
+	LASSERT(list_empty(&console_session.ses_rpc_freelist));
+	LASSERT(atomic_read(&console_session.ses_rpc_counter) == 0);
 }
diff --git a/drivers/staging/lustre/lnet/selftest/console.c b/drivers/staging/lustre/lnet/selftest/console.c
index 09e4700..f1152e4 100644
--- a/drivers/staging/lustre/lnet/selftest/console.c
+++ b/drivers/staging/lustre/lnet/selftest/console.c
@@ -797,7 +797,7 @@
 		return rc;
 	}
 
-	if (dents_up != 0) {
+	if (dents_up) {
 		/* verbose query */
 		rc = lstcon_nodes_getent(&grp->grp_ndl_list,
 					 index_p, count_p, dents_up);
diff --git a/drivers/staging/lustre/lnet/selftest/timer.c b/drivers/staging/lustre/lnet/selftest/timer.c
index 3bf4afb..82fd363 100644
--- a/drivers/staging/lustre/lnet/selftest/timer.c
+++ b/drivers/staging/lustre/lnet/selftest/timer.c
@@ -74,14 +74,14 @@
 
 	spin_lock(&stt_data.stt_lock);
 
-	LASSERT (stt_data.stt_nthreads > 0);
-	LASSERT (!stt_data.stt_shuttingdown);
-	LASSERT (timer->stt_func != NULL);
-	LASSERT (list_empty(&timer->stt_list));
-	LASSERT (cfs_time_after(timer->stt_expires, cfs_time_current_sec()));
+	LASSERT(stt_data.stt_nthreads > 0);
+	LASSERT(!stt_data.stt_shuttingdown);
+	LASSERT(timer->stt_func != NULL);
+	LASSERT(list_empty(&timer->stt_list));
+	LASSERT(cfs_time_after(timer->stt_expires, cfs_time_current_sec()));
 
 	/* a simple insertion sort */
-	list_for_each_prev (pos, STTIMER_SLOT(timer->stt_expires)) {
+	list_for_each_prev(pos, STTIMER_SLOT(timer->stt_expires)) {
 		stt_timer_t *old = list_entry(pos, stt_timer_t, stt_list);
 
 		if (cfs_time_aftereq(timer->stt_expires, old->stt_expires))
@@ -102,14 +102,14 @@
  * another CPU.
  */
 int
-stt_del_timer (stt_timer_t *timer)
+stt_del_timer(stt_timer_t *timer)
 {
 	int ret = 0;
 
 	spin_lock(&stt_data.stt_lock);
 
-	LASSERT (stt_data.stt_nthreads > 0);
-	LASSERT (!stt_data.stt_shuttingdown);
+	LASSERT(stt_data.stt_nthreads > 0);
+	LASSERT(!stt_data.stt_shuttingdown);
 
 	if (!list_empty(&timer->stt_list)) {
 		ret = 1;
@@ -122,7 +122,7 @@
 
 /* called with stt_data.stt_lock held */
 int
-stt_expire_list (struct list_head *slot, cfs_time_t now)
+stt_expire_list(struct list_head *slot, cfs_time_t now)
 {
 	int	  expired = 0;
 	stt_timer_t *timer;
@@ -146,7 +146,7 @@
 }
 
 int
-stt_check_timers (cfs_time_t *last)
+stt_check_timers(cfs_time_t *last)
 {
 	int	expired = 0;
 	cfs_time_t now;
@@ -169,7 +169,7 @@
 
 
 int
-stt_timer_main (void *arg)
+stt_timer_main(void *arg)
 {
 	int rc = 0;
 	UNUSED(arg);
@@ -193,7 +193,7 @@
 }
 
 int
-stt_start_timer_thread (void)
+stt_start_timer_thread(void)
 {
 	struct task_struct *task;
 
@@ -211,7 +211,7 @@
 
 
 int
-stt_startup (void)
+stt_startup(void)
 {
 	int rc = 0;
 	int i;
@@ -227,20 +227,20 @@
 	init_waitqueue_head(&stt_data.stt_waitq);
 	rc = stt_start_timer_thread();
 	if (rc != 0)
-		CERROR ("Can't spawn timer thread: %d\n", rc);
+		CERROR("Can't spawn timer thread: %d\n", rc);
 
 	return rc;
 }
 
 void
-stt_shutdown (void)
+stt_shutdown(void)
 {
 	int i;
 
 	spin_lock(&stt_data.stt_lock);
 
 	for (i = 0; i < STTIMER_NSLOTS; i++)
-		LASSERT (list_empty(&stt_data.stt_hash[i]));
+		LASSERT(list_empty(&stt_data.stt_hash[i]));
 
 	stt_data.stt_shuttingdown = 1;
 
diff --git a/drivers/staging/lustre/lustre/Kconfig b/drivers/staging/lustre/lustre/Kconfig
index 2156a44..93d59b6 100644
--- a/drivers/staging/lustre/lustre/Kconfig
+++ b/drivers/staging/lustre/lustre/Kconfig
@@ -16,7 +16,7 @@
 	  this file system support as a module, choose M here: the module will
 	  be called lustre.
 
-	  To mount Lustre file systems , you also need to install the user space
+	  To mount Lustre file systems, you also need to install the user space
 	  mount.lustre and other user space commands which can be found in the
 	  lustre-client package, available from
 	  http://downloads.whamcloud.com/public/lustre/
diff --git a/drivers/staging/lustre/lustre/fid/fid_request.c b/drivers/staging/lustre/lustre/fid/fid_request.c
index 66007b5..79fc2fe 100644
--- a/drivers/staging/lustre/lustre/fid/fid_request.c
+++ b/drivers/staging/lustre/lustre/fid/fid_request.c
@@ -548,9 +548,7 @@
 	seq_type_proc_dir = lprocfs_register(LUSTRE_SEQ_NAME,
 					     proc_lustre_root,
 					     NULL, NULL);
-	if (IS_ERR(seq_type_proc_dir))
-		return PTR_ERR(seq_type_proc_dir);
-	return 0;
+	return PTR_ERR_OR_ZERO(seq_type_proc_dir);
 }
 
 static void __exit fid_mod_exit(void)
diff --git a/drivers/staging/lustre/lustre/fld/fld_cache.c b/drivers/staging/lustre/lustre/fld/fld_cache.c
index 25099cb..4531510 100644
--- a/drivers/staging/lustre/lustre/fld/fld_cache.c
+++ b/drivers/staging/lustre/lustre/fld/fld_cache.c
@@ -267,7 +267,7 @@
 	const seqno_t new_end  = range->lsr_end;
 	struct fld_cache_entry *fldt;
 
-	OBD_ALLOC_GFP(fldt, sizeof *fldt, GFP_ATOMIC);
+	OBD_ALLOC_GFP(fldt, sizeof(*fldt), GFP_ATOMIC);
 	if (!fldt) {
 		OBD_FREE_PTR(f_new);
 		/* overlap is not allowed, so dont mess up list. */
diff --git a/drivers/staging/lustre/lustre/fld/fld_request.c b/drivers/staging/lustre/lustre/fld/fld_request.c
index 078e98b..e47fd50 100644
--- a/drivers/staging/lustre/lustre/fld/fld_request.c
+++ b/drivers/staging/lustre/lustre/fld/fld_request.c
@@ -59,8 +59,6 @@
 #include <lustre_mdc.h>
 #include "fld_internal.h"
 
-struct lu_context_key fld_thread_key;
-
 /* TODO: these 3 functions are copies of flow-control code from mdc_lib.c
  * It should be common thing. The same about mdc RPC lock */
 static int fld_req_avail(struct client_obd *cli, struct mdc_cache_waiter *mcw)
@@ -509,14 +507,11 @@
 	if (IS_ERR(fld_type_proc_dir))
 		return PTR_ERR(fld_type_proc_dir);
 
-	LU_CONTEXT_KEY_INIT(&fld_thread_key);
-	lu_context_key_register(&fld_thread_key);
 	return 0;
 }
 
 static void __exit fld_mod_exit(void)
 {
-	lu_context_key_degister(&fld_thread_key);
 	if (fld_type_proc_dir != NULL && !IS_ERR(fld_type_proc_dir)) {
 		lprocfs_remove(&fld_type_proc_dir);
 		fld_type_proc_dir = NULL;
diff --git a/drivers/staging/lustre/lustre/include/cl_object.h b/drivers/staging/lustre/lustre/include/cl_object.h
index edb40af..c485206 100644
--- a/drivers/staging/lustre/lustre/include/cl_object.h
+++ b/drivers/staging/lustre/lustre/include/cl_object.h
@@ -3096,13 +3096,13 @@
 void cl_io_print(const struct lu_env *env, void *cookie,
 		 lu_printer_t printer, const struct cl_io *io);
 
-#define CL_IO_SLICE_CLEAN(foo_io, base)				 \
-do {								    \
-	typeof(foo_io) __foo_io = (foo_io);			     \
+#define CL_IO_SLICE_CLEAN(foo_io, base)					\
+do {									\
+	typeof(foo_io) __foo_io = (foo_io);				\
 									\
-	CLASSERT(offsetof(typeof(*__foo_io), base) == 0);	       \
-	memset(&__foo_io->base + 1, 0,				  \
-	       (sizeof *__foo_io) - sizeof __foo_io->base);	     \
+	CLASSERT(offsetof(typeof(*__foo_io), base) == 0);		\
+	memset(&__foo_io->base + 1, 0,					\
+	       sizeof(*__foo_io) - sizeof(__foo_io->base));		\
 } while (0)
 
 /** @} cl_io */
diff --git a/drivers/staging/lustre/lustre/include/lclient.h b/drivers/staging/lustre/lustre/include/lclient.h
index 9d4011f..27316f7 100644
--- a/drivers/staging/lustre/lustre/include/lclient.h
+++ b/drivers/staging/lustre/lustre/include/lclient.h
@@ -388,8 +388,8 @@
 __u64 cl_fid_build_ino(const struct lu_fid *fid, int api32);
 __u32 cl_fid_build_gen(const struct lu_fid *fid);
 
-# define CLOBINVRNT(env, clob, expr)				    \
-	((void)sizeof(env), (void)sizeof(clob), (void)sizeof !!(expr))
+# define CLOBINVRNT(env, clob, expr)					\
+	((void)sizeof(env), (void)sizeof(clob), (void)sizeof(!!(expr)))
 
 int cl_init_ea_size(struct obd_export *md_exp, struct obd_export *dt_exp);
 int cl_ocd_update(struct obd_device *host,
diff --git a/drivers/staging/lustre/lustre/include/linux/lustre_compat25.h b/drivers/staging/lustre/lustre/include/linux/lustre_compat25.h
index 9243dfa..359c6c1 100644
--- a/drivers/staging/lustre/lustre/include/linux/lustre_compat25.h
+++ b/drivers/staging/lustre/lustre/include/linux/lustre_compat25.h
@@ -232,9 +232,6 @@
 	return flag;
 }
 
-# define ll_mrf_ret void
-# define LL_MRF_RETURN(rc)
-
 #include <linux/fs.h>
 
 # define ll_umode_t	umode_t
diff --git a/drivers/staging/lustre/lustre/include/lu_object.h b/drivers/staging/lustre/lustre/include/lu_object.h
index fa31be8..d5b8225 100644
--- a/drivers/staging/lustre/lustre/include/lu_object.h
+++ b/drivers/staging/lustre/lustre/include/lu_object.h
@@ -622,7 +622,7 @@
 	/**
 	 * objects hash table
 	 */
-	cfs_hash_t	       *ls_obj_hash;
+	struct cfs_hash	       *ls_obj_hash;
 	/**
 	 * index of bucket on hash table while purging
 	 */
@@ -659,7 +659,7 @@
 static inline struct lu_site_bkt_data *
 lu_site_bkt_from_fid(struct lu_site *site, struct lu_fid *fid)
 {
-	cfs_hash_bd_t bd;
+	struct cfs_hash_bd bd;
 
 	cfs_hash_bd_get(site->ls_obj_hash, fid, &bd);
 	return cfs_hash_bd_extra_get(site->ls_obj_hash, &bd);
diff --git a/drivers/staging/lustre/lustre/include/lustre/lustre_idl.h b/drivers/staging/lustre/lustre/include/lustre/lustre_idl.h
index 984235c..5ca18d0 100644
--- a/drivers/staging/lustre/lustre/include/lustre/lustre_idl.h
+++ b/drivers/staging/lustre/lustre/include/lustre/lustre_idl.h
@@ -831,9 +831,10 @@
 static inline void fid_cpu_to_le(struct lu_fid *dst, const struct lu_fid *src)
 {
 	/* check that all fields are converted */
-	CLASSERT(sizeof *src ==
-		 sizeof fid_seq(src) +
-		 sizeof fid_oid(src) + sizeof fid_ver(src));
+	CLASSERT(sizeof(*src) ==
+		 sizeof(fid_seq(src)) +
+		 sizeof(fid_oid(src)) +
+		 sizeof(fid_ver(src)));
 	dst->f_seq = cpu_to_le64(fid_seq(src));
 	dst->f_oid = cpu_to_le32(fid_oid(src));
 	dst->f_ver = cpu_to_le32(fid_ver(src));
@@ -842,9 +843,10 @@
 static inline void fid_le_to_cpu(struct lu_fid *dst, const struct lu_fid *src)
 {
 	/* check that all fields are converted */
-	CLASSERT(sizeof *src ==
-		 sizeof fid_seq(src) +
-		 sizeof fid_oid(src) + sizeof fid_ver(src));
+	CLASSERT(sizeof(*src) ==
+		 sizeof(fid_seq(src)) +
+		 sizeof(fid_oid(src)) +
+		 sizeof(fid_ver(src)));
 	dst->f_seq = le64_to_cpu(fid_seq(src));
 	dst->f_oid = le32_to_cpu(fid_oid(src));
 	dst->f_ver = le32_to_cpu(fid_ver(src));
@@ -853,9 +855,10 @@
 static inline void fid_cpu_to_be(struct lu_fid *dst, const struct lu_fid *src)
 {
 	/* check that all fields are converted */
-	CLASSERT(sizeof *src ==
-		 sizeof fid_seq(src) +
-		 sizeof fid_oid(src) + sizeof fid_ver(src));
+	CLASSERT(sizeof(*src) ==
+		 sizeof(fid_seq(src)) +
+		 sizeof(fid_oid(src)) +
+		 sizeof(fid_ver(src)));
 	dst->f_seq = cpu_to_be64(fid_seq(src));
 	dst->f_oid = cpu_to_be32(fid_oid(src));
 	dst->f_ver = cpu_to_be32(fid_ver(src));
@@ -864,9 +867,10 @@
 static inline void fid_be_to_cpu(struct lu_fid *dst, const struct lu_fid *src)
 {
 	/* check that all fields are converted */
-	CLASSERT(sizeof *src ==
-		 sizeof fid_seq(src) +
-		 sizeof fid_oid(src) + sizeof fid_ver(src));
+	CLASSERT(sizeof(*src) ==
+		 sizeof(fid_seq(src)) +
+		 sizeof(fid_oid(src)) +
+		 sizeof(fid_ver(src)));
 	dst->f_seq = be64_to_cpu(fid_seq(src));
 	dst->f_oid = be32_to_cpu(fid_oid(src));
 	dst->f_ver = be32_to_cpu(fid_ver(src));
@@ -891,9 +895,11 @@
 static inline int lu_fid_eq(const struct lu_fid *f0, const struct lu_fid *f1)
 {
 	/* Check that there is no alignment padding. */
-	CLASSERT(sizeof *f0 ==
-		 sizeof f0->f_seq + sizeof f0->f_oid + sizeof f0->f_ver);
-	return memcmp(f0, f1, sizeof *f0) == 0;
+	CLASSERT(sizeof(*f0) ==
+		 sizeof(f0->f_seq) +
+		 sizeof(f0->f_oid) +
+		 sizeof(f0->f_ver));
+	return memcmp(f0, f1, sizeof(*f0)) == 0;
 }
 
 #define __diff_normalize(val0, val1)			    \
@@ -1638,8 +1644,10 @@
 
 /* extern void lustre_swab_lov_mds_md(struct lov_mds_md *llm); */
 
-#define MAX_MD_SIZE (sizeof(struct lov_mds_md) + 4 * sizeof(struct lov_ost_data))
-#define MIN_MD_SIZE (sizeof(struct lov_mds_md) + 1 * sizeof(struct lov_ost_data))
+#define MAX_MD_SIZE							\
+	(sizeof(struct lov_mds_md) + 4 * sizeof(struct lov_ost_data))
+#define MIN_MD_SIZE							\
+	(sizeof(struct lov_mds_md) + 1 * sizeof(struct lov_ost_data))
 
 #define XATTR_NAME_ACL_ACCESS   "system.posix_acl_access"
 #define XATTR_NAME_ACL_DEFAULT  "system.posix_acl_default"
diff --git a/drivers/staging/lustre/lustre/include/lustre_dlm.h b/drivers/staging/lustre/lustre/include/lustre_dlm.h
index 7020d9c..bc2b82f 100644
--- a/drivers/staging/lustre/lustre/include/lustre_dlm.h
+++ b/drivers/staging/lustre/lustre/include/lustre_dlm.h
@@ -375,7 +375,7 @@
 	ldlm_side_t		ns_client;
 
 	/** Resource hash table for namespace. */
-	cfs_hash_t		*ns_rs_hash;
+	struct cfs_hash		*ns_rs_hash;
 
 	/** serialize */
 	spinlock_t		ns_lock;
@@ -1083,7 +1083,7 @@
  * Rate-limited version of lock printing function.
  */
 #define LDLM_DEBUG_LIMIT(mask, lock, fmt, a...) do {			 \
-	static cfs_debug_limit_state_t _ldlm_cdls;			   \
+	static struct cfs_debug_limit_state _ldlm_cdls;			   \
 	LIBCFS_DEBUG_MSG_DATA_DECL(msgdata, mask, &_ldlm_cdls);	      \
 	ldlm_lock_debug(&msgdata, mask, &_ldlm_cdls, lock, "### " fmt , ##a);\
 } while (0)
diff --git a/drivers/staging/lustre/lustre/include/lustre_export.h b/drivers/staging/lustre/lustre/include/lustre_export.h
index d61c020..2feb38b 100644
--- a/drivers/staging/lustre/lustre/include/lustre_export.h
+++ b/drivers/staging/lustre/lustre/include/lustre_export.h
@@ -197,12 +197,12 @@
 	/** Connection count value from last succesful reconnect rpc */
 	__u32		     exp_conn_cnt;
 	/** Hash list of all ldlm locks granted on this export */
-	cfs_hash_t	       *exp_lock_hash;
+	struct cfs_hash	       *exp_lock_hash;
 	/**
 	 * Hash list for Posix lock deadlock detection, added with
 	 * ldlm_lock::l_exp_flock_hash.
 	 */
-	cfs_hash_t	       *exp_flock_hash;
+	struct cfs_hash	       *exp_flock_hash;
 	struct list_head		exp_outstanding_replies;
 	struct list_head		exp_uncommitted_replies;
 	spinlock_t		  exp_uncommitted_replies_lock;
diff --git a/drivers/staging/lustre/lustre/include/lustre_fid.h b/drivers/staging/lustre/lustre/include/lustre_fid.h
index d9d5814..ff11953 100644
--- a/drivers/staging/lustre/lustre/include/lustre_fid.h
+++ b/drivers/staging/lustre/lustre/include/lustre_fid.h
@@ -590,7 +590,7 @@
 static inline void ostid_build_res_name(struct ost_id *oi,
 					struct ldlm_res_id *name)
 {
-	memset(name, 0, sizeof *name);
+	memset(name, 0, sizeof(*name));
 	if (fid_seq_is_mdt0(ostid_seq(oi))) {
 		name->name[LUSTRE_RES_ID_SEQ_OFF] = ostid_id(oi);
 		name->name[LUSTRE_RES_ID_VER_OID_OFF] = ostid_seq(oi);
diff --git a/drivers/staging/lustre/lustre/include/lustre_lite.h b/drivers/staging/lustre/lustre/include/lustre_lite.h
index 25f8bfa..beccb5e 100644
--- a/drivers/staging/lustre/lustre/include/lustre_lite.h
+++ b/drivers/staging/lustre/lustre/include/lustre_lite.h
@@ -139,7 +139,11 @@
 {
 	if (BITS_PER_LONG == 32 && hash64)
 		hash >>= 32;
-	return ~0UL - hash;
+	/* save hash 0 as index 0 because otherwise we'll save it at
+	 * page index end (~0UL) and it causes truncate_inode_pages_range()
+	 * to loop forever.
+	 */
+	return ~0UL - (hash + !hash);
 }
 
 /** @} lite */
diff --git a/drivers/staging/lustre/lustre/include/lustre_net.h b/drivers/staging/lustre/lustre/include/lustre_net.h
index e947002..72edf01 100644
--- a/drivers/staging/lustre/lustre/include/lustre_net.h
+++ b/drivers/staging/lustre/lustre/include/lustre_net.h
@@ -1427,7 +1427,7 @@
 struct nrs_crrn_net {
 	struct ptlrpc_nrs_resource	cn_res;
 	cfs_binheap_t		       *cn_binheap;
-	cfs_hash_t		       *cn_cli_hash;
+	struct cfs_hash		       *cn_cli_hash;
 	/**
 	 * Used when a new scheduling round commences, in order to synchronize
 	 * all clients with the new round number.
@@ -1568,7 +1568,7 @@
 struct nrs_orr_data {
 	struct ptlrpc_nrs_resource	od_res;
 	cfs_binheap_t		       *od_binheap;
-	cfs_hash_t		       *od_obj_hash;
+	struct cfs_hash		       *od_obj_hash;
 	struct kmem_cache		       *od_cache;
 	/**
 	 * Used when a new scheduling round commences, in order to synchronize
@@ -2206,7 +2206,7 @@
 #define DEBUG_REQ(level, req, fmt, args...)				   \
 do {									  \
 	if ((level) & (D_ERROR | D_WARNING)) {				\
-		static cfs_debug_limit_state_t cdls;			  \
+		static struct cfs_debug_limit_state cdls;			  \
 		LIBCFS_DEBUG_MSG_DATA_DECL(msgdata, level, &cdls);	    \
 		debug_req(&msgdata, level, &cdls, req, "@@@ "fmt" ", ## args);\
 	} else {							      \
diff --git a/drivers/staging/lustre/lustre/include/obd.h b/drivers/staging/lustre/lustre/include/obd.h
index a612255..d0aea15 100644
--- a/drivers/staging/lustre/lustre/include/obd.h
+++ b/drivers/staging/lustre/lustre/include/obd.h
@@ -177,7 +177,7 @@
 	 * ->lsm_wire contains padding, but it should be zeroed out during
 	 * allocation.
 	 */
-	return memcmp(&m1->lsm_wire, &m2->lsm_wire, sizeof m1->lsm_wire);
+	return memcmp(&m1->lsm_wire, &m2->lsm_wire, sizeof(m1->lsm_wire));
 }
 
 static inline int lov_lum_lsm_cmp(struct lov_user_md *lum,
@@ -429,7 +429,7 @@
 	/* ptlrpc work for writeback in ptlrpcd context */
 	void		    *cl_writeback_work;
 	/* hash tables for osc_quota_info */
-	cfs_hash_t	      *cl_quota_hash[MAXQUOTAS];
+	struct cfs_hash	      *cl_quota_hash[MAXQUOTAS];
 };
 #define obd2cli_tgt(obd) ((char *)(obd)->u.cli.cl_target_uuid.uuid)
 
@@ -556,7 +556,7 @@
 	__u32		   lov_tgt_size;   /* size of tgts array */
 	int		     lov_connects;
 	int		     lov_pool_count;
-	cfs_hash_t	     *lov_pools_hash_body; /* used for key access */
+	struct cfs_hash	     *lov_pools_hash_body; /* used for key access */
 	struct list_head	      lov_pool_list; /* used for sequential access */
 	struct proc_dir_entry   *lov_pool_proc_entry;
 	enum lustre_sec_part    lov_sp_me;
@@ -855,11 +855,11 @@
 	 * protection of other bits using _bh lock */
 	unsigned long obd_recovery_expired:1;
 	/* uuid-export hash body */
-	cfs_hash_t	     *obd_uuid_hash;
+	struct cfs_hash	     *obd_uuid_hash;
 	/* nid-export hash body */
-	cfs_hash_t	     *obd_nid_hash;
+	struct cfs_hash	     *obd_nid_hash;
 	/* nid stats body */
-	cfs_hash_t	     *obd_nid_stats_hash;
+	struct cfs_hash	     *obd_nid_stats_hash;
 	struct list_head	      obd_nid_stats;
 	atomic_t	    obd_refcount;
 	wait_queue_head_t	     obd_refcount_waitq;
diff --git a/drivers/staging/lustre/lustre/include/obd_support.h b/drivers/staging/lustre/lustre/include/obd_support.h
index 03e6133..9697e7f 100644
--- a/drivers/staging/lustre/lustre/include/obd_support.h
+++ b/drivers/staging/lustre/lustre/include/obd_support.h
@@ -633,8 +633,8 @@
 
 #define OBD_ALLOC(ptr, size) OBD_ALLOC_GFP(ptr, size, __GFP_IO)
 #define OBD_ALLOC_WAIT(ptr, size) OBD_ALLOC_GFP(ptr, size, GFP_IOFS)
-#define OBD_ALLOC_PTR(ptr) OBD_ALLOC(ptr, sizeof *(ptr))
-#define OBD_ALLOC_PTR_WAIT(ptr) OBD_ALLOC_WAIT(ptr, sizeof *(ptr))
+#define OBD_ALLOC_PTR(ptr) OBD_ALLOC(ptr, sizeof(*(ptr)))
+#define OBD_ALLOC_PTR_WAIT(ptr) OBD_ALLOC_WAIT(ptr, sizeof(*(ptr)))
 
 #define OBD_CPT_ALLOC_GFP(ptr, cptab, cpt, size, gfp_mask)		      \
 	__OBD_MALLOC_VERBOSE(ptr, cptab, cpt, size, gfp_mask)
@@ -643,7 +643,7 @@
 	OBD_CPT_ALLOC_GFP(ptr, cptab, cpt, size, __GFP_IO)
 
 #define OBD_CPT_ALLOC_PTR(ptr, cptab, cpt)				      \
-	OBD_CPT_ALLOC(ptr, cptab, cpt, sizeof *(ptr))
+	OBD_CPT_ALLOC(ptr, cptab, cpt, sizeof(*(ptr)))
 
 # define __OBD_VMALLOC_VEROBSE(ptr, cptab, cpt, size)			      \
 do {									      \
@@ -773,7 +773,7 @@
 #define OBD_SLAB_CPT_ALLOC_GFP(ptr, slab, cptab, cpt, size, flags)	      \
 	__OBD_SLAB_ALLOC_VERBOSE(ptr, slab, cptab, cpt, size, flags)
 
-#define OBD_FREE_PTR(ptr) OBD_FREE(ptr, sizeof *(ptr))
+#define OBD_FREE_PTR(ptr) OBD_FREE(ptr, sizeof(*(ptr)))
 
 #define OBD_SLAB_FREE(ptr, slab, size)					\
 do {									  \
@@ -789,19 +789,19 @@
 	OBD_SLAB_CPT_ALLOC_GFP(ptr, slab, cptab, cpt, size, __GFP_IO)
 
 #define OBD_SLAB_ALLOC_PTR(ptr, slab)					      \
-	OBD_SLAB_ALLOC(ptr, slab, sizeof *(ptr))
+	OBD_SLAB_ALLOC(ptr, slab, sizeof(*(ptr)))
 
 #define OBD_SLAB_CPT_ALLOC_PTR(ptr, slab, cptab, cpt)			      \
-	OBD_SLAB_CPT_ALLOC(ptr, slab, cptab, cpt, sizeof *(ptr))
+	OBD_SLAB_CPT_ALLOC(ptr, slab, cptab, cpt, sizeof(*(ptr)))
 
 #define OBD_SLAB_ALLOC_PTR_GFP(ptr, slab, flags)			      \
-	OBD_SLAB_ALLOC_GFP(ptr, slab, sizeof *(ptr), flags)
+	OBD_SLAB_ALLOC_GFP(ptr, slab, sizeof(*(ptr)), flags)
 
 #define OBD_SLAB_CPT_ALLOC_PTR_GFP(ptr, slab, cptab, cpt, flags)		      \
-	OBD_SLAB_CPT_ALLOC_GFP(ptr, slab, cptab, cpt, sizeof *(ptr), flags)
+	OBD_SLAB_CPT_ALLOC_GFP(ptr, slab, cptab, cpt, sizeof(*(ptr)), flags)
 
 #define OBD_SLAB_FREE_PTR(ptr, slab)					      \
-	OBD_SLAB_FREE((ptr), (slab), sizeof *(ptr))
+	OBD_SLAB_FREE((ptr), (slab), sizeof(*(ptr)))
 
 #define KEY_IS(str) \
 	(keylen >= (sizeof(str)-1) && memcmp(key, str, (sizeof(str)-1)) == 0)
diff --git a/drivers/staging/lustre/lustre/lclient/lcommon_cl.c b/drivers/staging/lustre/lustre/lclient/lcommon_cl.c
index 8ff38c6..e60c04d 100644
--- a/drivers/staging/lustre/lustre/lclient/lcommon_cl.c
+++ b/drivers/staging/lustre/lustre/lclient/lcommon_cl.c
@@ -701,7 +701,7 @@
 
 	CDEBUG(D_VFSTRACE, "lock: %d [%lu, %lu]\n", mode, start, end);
 
-	memset(&cio->cui_link, 0, sizeof cio->cui_link);
+	memset(&cio->cui_link, 0, sizeof(cio->cui_link));
 
 	if (cio->cui_fd && (cio->cui_fd->fd_flags & LL_FILE_GROUP_LOCKED)) {
 		descr->cld_mode = CLM_GROUP;
diff --git a/drivers/staging/lustre/lustre/ldlm/interval_tree.c b/drivers/staging/lustre/lustre/ldlm/interval_tree.c
index c65b13c..1de1d8e 100644
--- a/drivers/staging/lustre/lustre/ldlm/interval_tree.c
+++ b/drivers/staging/lustre/lustre/ldlm/interval_tree.c
@@ -125,11 +125,11 @@
 
 #define interval_for_each(node, root)		   \
 for (node = interval_first(root); node != NULL;	 \
-     node = interval_next(node))
+	node = interval_next(node))
 
 #define interval_for_each_reverse(node, root)	   \
 for (node = interval_last(root); node != NULL;	  \
-     node = interval_prev(node))
+	node = interval_prev(node))
 
 static struct interval_node *interval_first(struct interval_node *node)
 {
@@ -239,7 +239,7 @@
 	left_max = node->in_left ? node->in_left->in_max_high : 0;
 	right_max = node->in_right ? node->in_right->in_max_high : 0;
 	node->in_max_high  = max_u64(interval_high(node),
-				     max_u64(left_max,right_max));
+				     max_u64(left_max, right_max));
 }
 
 /* The left rotation "pivots" around the link from node to node->right, and
@@ -427,8 +427,9 @@
 			} else {
 				if (node_is_black_or_0(tmp->in_right)) {
 					struct interval_node *o_left;
-					if ((o_left = tmp->in_left))
-					     o_left->in_color = INTERVAL_BLACK;
+					o_left = tmp->in_left;
+					if (o_left)
+						o_left->in_color = INTERVAL_BLACK;
 					tmp->in_color = INTERVAL_RED;
 					__rotate_right(tmp, root);
 					tmp = parent->in_right;
@@ -436,7 +437,7 @@
 				tmp->in_color = parent->in_color;
 				parent->in_color = INTERVAL_BLACK;
 				if (tmp->in_right)
-				    tmp->in_right->in_color = INTERVAL_BLACK;
+					tmp->in_right->in_color = INTERVAL_BLACK;
 				__rotate_left(parent, root);
 				node = *root;
 				break;
@@ -457,8 +458,9 @@
 			} else {
 				if (node_is_black_or_0(tmp->in_left)) {
 					struct interval_node *o_right;
-					if ((o_right = tmp->in_right))
-					    o_right->in_color = INTERVAL_BLACK;
+					o_right = tmp->in_right;
+					if (o_right)
+						o_right->in_color = INTERVAL_BLACK;
 					tmp->in_color = INTERVAL_RED;
 					__rotate_left(tmp, root);
 					tmp = parent->in_left;
@@ -545,7 +547,7 @@
 		update_maxhigh(child ? : parent, node->in_max_high);
 		update_maxhigh(node, old->in_max_high);
 		if (parent == old)
-			 parent = node;
+			parent = node;
 		goto color;
 	}
 	parent = node->in_parent;
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_extent.c b/drivers/staging/lustre/lustre/ldlm/ldlm_extent.c
index 7e31663..ac5d66a 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_extent.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_extent.c
@@ -144,7 +144,7 @@
 	l->l_tree_node = NULL;
 	list_del_init(&l->l_sl_policy);
 
-	return (list_empty(&n->li_group) ? n : NULL);
+	return list_empty(&n->li_group) ? n : NULL;
 }
 
 static inline int lock_mode_to_index(ldlm_mode_t mode)
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_flock.c b/drivers/staging/lustre/lustre/ldlm/ldlm_flock.c
index c68ed27..39fcdac 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_flock.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_flock.c
@@ -745,7 +745,7 @@
  * Export handle<->flock hash operations.
  */
 static unsigned
-ldlm_export_flock_hash(cfs_hash_t *hs, const void *key, unsigned mask)
+ldlm_export_flock_hash(struct cfs_hash *hs, const void *key, unsigned mask)
 {
 	return cfs_hash_u64_hash(*(__u64 *)key, mask);
 }
@@ -772,7 +772,7 @@
 }
 
 static void
-ldlm_export_flock_get(cfs_hash_t *hs, struct hlist_node *hnode)
+ldlm_export_flock_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ldlm_lock *lock;
 	struct ldlm_flock *flock;
@@ -787,7 +787,7 @@
 }
 
 static void
-ldlm_export_flock_put(cfs_hash_t *hs, struct hlist_node *hnode)
+ldlm_export_flock_put(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ldlm_lock *lock;
 	struct ldlm_flock *flock;
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c b/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c
index 6133b3f..3900a69 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c
@@ -529,7 +529,7 @@
 		lock_res_nested(oldres, LRT_NEW);
 	}
 	LASSERT(memcmp(new_resid, &oldres->lr_name,
-		       sizeof oldres->lr_name) != 0);
+		       sizeof(oldres->lr_name)) != 0);
 	lock->l_resource = newres;
 	unlock_res(oldres);
 	unlock_res_and_lock(lock);
@@ -1891,7 +1891,7 @@
 	return LDLM_ITER_CONTINUE;
 }
 
-static int ldlm_reprocess_res(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static int ldlm_reprocess_res(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			      struct hlist_node *hnode, void *arg)
 {
 	struct ldlm_resource *res = cfs_hash_object(hs, hnode);
@@ -2040,7 +2040,7 @@
  * Iterator function for ldlm_cancel_locks_for_export.
  * Cancels passed locks.
  */
-int ldlm_cancel_locks_for_export_cb(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+int ldlm_cancel_locks_for_export_cb(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 				    struct hlist_node *hnode, void *data)
 
 {
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_lockd.c b/drivers/staging/lustre/lustre/ldlm/ldlm_lockd.c
index a100a0b..fde9bcd 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_lockd.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_lockd.c
@@ -937,7 +937,7 @@
  * Export handle<->lock hash operations.
  */
 static unsigned
-ldlm_export_lock_hash(cfs_hash_t *hs, const void *key, unsigned mask)
+ldlm_export_lock_hash(struct cfs_hash *hs, const void *key, unsigned mask)
 {
 	return cfs_hash_u64_hash(((struct lustre_handle *)key)->cookie, mask);
 }
@@ -973,7 +973,7 @@
 }
 
 static void
-ldlm_export_lock_get(cfs_hash_t *hs, struct hlist_node *hnode)
+ldlm_export_lock_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ldlm_lock *lock;
 
@@ -982,7 +982,7 @@
 }
 
 static void
-ldlm_export_lock_put(cfs_hash_t *hs, struct hlist_node *hnode)
+ldlm_export_lock_put(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ldlm_lock *lock;
 
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_request.c b/drivers/staging/lustre/lustre/ldlm/ldlm_request.c
index 21cb523..dcc2784 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_request.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_request.c
@@ -1652,7 +1652,7 @@
 
 		LDLM_LOCK_GET(lock);
 		spin_unlock(&ns->ns_lock);
-		lu_ref_add(&lock->l_reference, __FUNCTION__, current);
+		lu_ref_add(&lock->l_reference, __func__, current);
 
 		/* Pass the lock through the policy filter and see if it
 		 * should stay in LRU.
@@ -1670,7 +1670,7 @@
 		result = pf(ns, lock, unused, added, count);
 		if (result == LDLM_POLICY_KEEP_LOCK) {
 			lu_ref_del(&lock->l_reference,
-				   __FUNCTION__, current);
+				   __func__, current);
 			LDLM_LOCK_RELEASE(lock);
 			spin_lock(&ns->ns_lock);
 			break;
@@ -1693,7 +1693,7 @@
 			 * by itself, or the lock is no longer unused. */
 			unlock_res_and_lock(lock);
 			lu_ref_del(&lock->l_reference,
-				   __FUNCTION__, current);
+				   __func__, current);
 			LDLM_LOCK_RELEASE(lock);
 			spin_lock(&ns->ns_lock);
 			continue;
@@ -1724,7 +1724,7 @@
 		LASSERT(list_empty(&lock->l_bl_ast));
 		list_add(&lock->l_bl_ast, cancels);
 		unlock_res_and_lock(lock);
-		lu_ref_del(&lock->l_reference, __FUNCTION__, current);
+		lu_ref_del(&lock->l_reference, __func__, current);
 		spin_lock(&ns->ns_lock);
 		added++;
 		unused--;
@@ -1925,7 +1925,7 @@
 	void   *lc_opaque;
 };
 
-static int ldlm_cli_hash_cancel_unused(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static int ldlm_cli_hash_cancel_unused(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 				       struct hlist_node *hnode, void *arg)
 {
 	struct ldlm_resource	   *res = cfs_hash_object(hs, hnode);
@@ -2023,7 +2023,7 @@
 	return helper->iter(lock, helper->closure);
 }
 
-static int ldlm_res_iter_helper(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static int ldlm_res_iter_helper(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 				struct hlist_node *hnode, void *arg)
 
 {
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_resource.c b/drivers/staging/lustre/lustre/ldlm/ldlm_resource.c
index 208751a..77e022b 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_resource.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_resource.c
@@ -159,7 +159,7 @@
 {
 	struct ldlm_namespace *ns  = m->private;
 	__u64		  res = 0;
-	cfs_hash_bd_t	  bd;
+	struct cfs_hash_bd	  bd;
 	int		    i;
 
 	/* result is not strictly consistant */
@@ -389,7 +389,7 @@
 
 #endif /* LPROCFS */
 
-static unsigned ldlm_res_hop_hash(cfs_hash_t *hs,
+static unsigned ldlm_res_hop_hash(struct cfs_hash *hs,
 				  const void *key, unsigned mask)
 {
 	const struct ldlm_res_id     *id  = key;
@@ -401,7 +401,7 @@
 	return val & mask;
 }
 
-static unsigned ldlm_res_hop_fid_hash(cfs_hash_t *hs,
+static unsigned ldlm_res_hop_fid_hash(struct cfs_hash *hs,
 				      const void *key, unsigned mask)
 {
 	const struct ldlm_res_id *id = key;
@@ -453,7 +453,7 @@
 	return hlist_entry(hnode, struct ldlm_resource, lr_hash);
 }
 
-static void ldlm_res_hop_get_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+static void ldlm_res_hop_get_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ldlm_resource *res;
 
@@ -461,7 +461,7 @@
 	ldlm_resource_getref(res);
 }
 
-static void ldlm_res_hop_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+static void ldlm_res_hop_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ldlm_resource *res;
 
@@ -470,7 +470,7 @@
 	ldlm_resource_putref_locked(res);
 }
 
-static void ldlm_res_hop_put(cfs_hash_t *hs, struct hlist_node *hnode)
+static void ldlm_res_hop_put(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ldlm_resource *res;
 
@@ -564,7 +564,7 @@
 	struct ldlm_namespace *ns = NULL;
 	struct ldlm_ns_bucket *nsb;
 	ldlm_ns_hash_def_t    *nsd;
-	cfs_hash_bd_t	  bd;
+	struct cfs_hash_bd	  bd;
 	int		    idx;
 	int		    rc;
 
@@ -743,7 +743,7 @@
 	} while (1);
 }
 
-static int ldlm_resource_clean(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static int ldlm_resource_clean(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			       struct hlist_node *hnode, void *arg)
 {
 	struct ldlm_resource *res = cfs_hash_object(hs, hnode);
@@ -756,7 +756,7 @@
 	return 0;
 }
 
-static int ldlm_resource_complain(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static int ldlm_resource_complain(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 				  struct hlist_node *hnode, void *arg)
 {
 	struct ldlm_resource  *res = cfs_hash_object(hs, hnode);
@@ -1060,7 +1060,7 @@
 {
 	struct hlist_node     *hnode;
 	struct ldlm_resource *res;
-	cfs_hash_bd_t	 bd;
+	struct cfs_hash_bd	 bd;
 	__u64		 version;
 	int		      ns_refcount = 0;
 
@@ -1115,7 +1115,7 @@
 		lu_ref_fini(&res->lr_reference);
 		/* We have taken lr_lvb_mutex. Drop it. */
 		mutex_unlock(&res->lr_lvb_mutex);
-		OBD_SLAB_FREE(res, ldlm_resource_slab, sizeof *res);
+		OBD_SLAB_FREE(res, ldlm_resource_slab, sizeof(*res));
 
 		res = hlist_entry(hnode, struct ldlm_resource, lr_hash);
 		/* Synchronize with regard to resource creation. */
@@ -1183,7 +1183,7 @@
 	return res;
 }
 
-static void __ldlm_resource_putref_final(cfs_hash_bd_t *bd,
+static void __ldlm_resource_putref_final(struct cfs_hash_bd *bd,
 					 struct ldlm_resource *res)
 {
 	struct ldlm_ns_bucket *nsb = res->lr_ns_bucket;
@@ -1214,7 +1214,7 @@
 int ldlm_resource_putref(struct ldlm_resource *res)
 {
 	struct ldlm_namespace *ns = ldlm_res_to_ns(res);
-	cfs_hash_bd_t   bd;
+	struct cfs_hash_bd   bd;
 
 	LASSERT_ATOMIC_GT_LT(&res->lr_refcount, 0, LI_POISON);
 	CDEBUG(D_INFO, "putref res: %p count: %d\n",
@@ -1226,7 +1226,7 @@
 		cfs_hash_bd_unlock(ns->ns_rs_hash, &bd, 1);
 		if (ns->ns_lvbo && ns->ns_lvbo->lvbo_free)
 			ns->ns_lvbo->lvbo_free(res);
-		OBD_SLAB_FREE(res, ldlm_resource_slab, sizeof *res);
+		OBD_SLAB_FREE(res, ldlm_resource_slab, sizeof(*res));
 		return 1;
 	}
 	return 0;
@@ -1243,7 +1243,7 @@
 	       res, atomic_read(&res->lr_refcount) - 1);
 
 	if (atomic_dec_and_test(&res->lr_refcount)) {
-		cfs_hash_bd_t bd;
+		struct cfs_hash_bd bd;
 
 		cfs_hash_bd_get(ldlm_res_to_ns(res)->ns_rs_hash,
 				&res->lr_name, &bd);
@@ -1256,7 +1256,7 @@
 		 */
 		if (ns->ns_lvbo && ns->ns_lvbo->lvbo_free)
 			ns->ns_lvbo->lvbo_free(res);
-		OBD_SLAB_FREE(res, ldlm_resource_slab, sizeof *res);
+		OBD_SLAB_FREE(res, ldlm_resource_slab, sizeof(*res));
 
 		cfs_hash_bd_lock(ns->ns_rs_hash, &bd, 1);
 		return 1;
@@ -1352,7 +1352,7 @@
 }
 EXPORT_SYMBOL(ldlm_dump_all_namespaces);
 
-static int ldlm_res_hash_dump(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static int ldlm_res_hash_dump(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			      struct hlist_node *hnode, void *arg)
 {
 	struct ldlm_resource *res = cfs_hash_object(hs, hnode);
diff --git a/drivers/staging/lustre/lustre/libcfs/hash.c b/drivers/staging/lustre/lustre/libcfs/hash.c
index 0dd12c8..e3e0578 100644
--- a/drivers/staging/lustre/lustre/libcfs/hash.c
+++ b/drivers/staging/lustre/lustre/libcfs/hash.c
@@ -119,25 +119,25 @@
 struct cfs_wi_sched *cfs_sched_rehash;
 
 static inline void
-cfs_hash_nl_lock(cfs_hash_lock_t *lock, int exclusive) {}
+cfs_hash_nl_lock(union cfs_hash_lock *lock, int exclusive) {}
 
 static inline void
-cfs_hash_nl_unlock(cfs_hash_lock_t *lock, int exclusive) {}
+cfs_hash_nl_unlock(union cfs_hash_lock *lock, int exclusive) {}
 
 static inline void
-cfs_hash_spin_lock(cfs_hash_lock_t *lock, int exclusive)
+cfs_hash_spin_lock(union cfs_hash_lock *lock, int exclusive)
 {
 	spin_lock(&lock->spin);
 }
 
 static inline void
-cfs_hash_spin_unlock(cfs_hash_lock_t *lock, int exclusive)
+cfs_hash_spin_unlock(union cfs_hash_lock *lock, int exclusive)
 {
 	spin_unlock(&lock->spin);
 }
 
 static inline void
-cfs_hash_rw_lock(cfs_hash_lock_t *lock, int exclusive)
+cfs_hash_rw_lock(union cfs_hash_lock *lock, int exclusive)
 {
 	if (!exclusive)
 		read_lock(&lock->rw);
@@ -146,7 +146,7 @@
 }
 
 static inline void
-cfs_hash_rw_unlock(cfs_hash_lock_t *lock, int exclusive)
+cfs_hash_rw_unlock(union cfs_hash_lock *lock, int exclusive)
 {
 	if (!exclusive)
 		read_unlock(&lock->rw);
@@ -209,7 +209,7 @@
 };
 
 static void
-cfs_hash_lock_setup(cfs_hash_t *hs)
+cfs_hash_lock_setup(struct cfs_hash *hs)
 {
 	if (cfs_hash_with_no_lock(hs)) {
 		hs->hs_lops = &cfs_hash_nl_lops;
@@ -246,13 +246,13 @@
 } cfs_hash_head_t;
 
 static int
-cfs_hash_hh_hhead_size(cfs_hash_t *hs)
+cfs_hash_hh_hhead_size(struct cfs_hash *hs)
 {
 	return sizeof(cfs_hash_head_t);
 }
 
 static struct hlist_head *
-cfs_hash_hh_hhead(cfs_hash_t *hs, cfs_hash_bd_t *bd)
+cfs_hash_hh_hhead(struct cfs_hash *hs, struct cfs_hash_bd *bd)
 {
 	cfs_hash_head_t *head = (cfs_hash_head_t *)&bd->bd_bucket->hsb_head[0];
 
@@ -260,7 +260,7 @@
 }
 
 static int
-cfs_hash_hh_hnode_add(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_hh_hnode_add(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnode)
 {
 	hlist_add_head(hnode, cfs_hash_hh_hhead(hs, bd));
@@ -268,7 +268,7 @@
 }
 
 static int
-cfs_hash_hh_hnode_del(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_hh_hnode_del(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnode)
 {
 	hlist_del_init(hnode);
@@ -285,13 +285,13 @@
 } cfs_hash_head_dep_t;
 
 static int
-cfs_hash_hd_hhead_size(cfs_hash_t *hs)
+cfs_hash_hd_hhead_size(struct cfs_hash *hs)
 {
 	return sizeof(cfs_hash_head_dep_t);
 }
 
 static struct hlist_head *
-cfs_hash_hd_hhead(cfs_hash_t *hs, cfs_hash_bd_t *bd)
+cfs_hash_hd_hhead(struct cfs_hash *hs, struct cfs_hash_bd *bd)
 {
 	cfs_hash_head_dep_t   *head;
 
@@ -300,7 +300,7 @@
 }
 
 static int
-cfs_hash_hd_hnode_add(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_hd_hnode_add(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnode)
 {
 	cfs_hash_head_dep_t *hh = container_of(cfs_hash_hd_hhead(hs, bd),
@@ -310,7 +310,7 @@
 }
 
 static int
-cfs_hash_hd_hnode_del(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_hd_hnode_del(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnode)
 {
 	cfs_hash_head_dep_t *hh = container_of(cfs_hash_hd_hhead(hs, bd),
@@ -329,13 +329,13 @@
 } cfs_hash_dhead_t;
 
 static int
-cfs_hash_dh_hhead_size(cfs_hash_t *hs)
+cfs_hash_dh_hhead_size(struct cfs_hash *hs)
 {
 	return sizeof(cfs_hash_dhead_t);
 }
 
 static struct hlist_head *
-cfs_hash_dh_hhead(cfs_hash_t *hs, cfs_hash_bd_t *bd)
+cfs_hash_dh_hhead(struct cfs_hash *hs, struct cfs_hash_bd *bd)
 {
 	cfs_hash_dhead_t *head;
 
@@ -344,7 +344,7 @@
 }
 
 static int
-cfs_hash_dh_hnode_add(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_dh_hnode_add(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnode)
 {
 	cfs_hash_dhead_t *dh = container_of(cfs_hash_dh_hhead(hs, bd),
@@ -359,7 +359,7 @@
 }
 
 static int
-cfs_hash_dh_hnode_del(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_dh_hnode_del(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnd)
 {
 	cfs_hash_dhead_t *dh = container_of(cfs_hash_dh_hhead(hs, bd),
@@ -384,13 +384,13 @@
 } cfs_hash_dhead_dep_t;
 
 static int
-cfs_hash_dd_hhead_size(cfs_hash_t *hs)
+cfs_hash_dd_hhead_size(struct cfs_hash *hs)
 {
 	return sizeof(cfs_hash_dhead_dep_t);
 }
 
 static struct hlist_head *
-cfs_hash_dd_hhead(cfs_hash_t *hs, cfs_hash_bd_t *bd)
+cfs_hash_dd_hhead(struct cfs_hash *hs, struct cfs_hash_bd *bd)
 {
 	cfs_hash_dhead_dep_t *head;
 
@@ -399,7 +399,7 @@
 }
 
 static int
-cfs_hash_dd_hnode_add(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_dd_hnode_add(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnode)
 {
 	cfs_hash_dhead_dep_t *dh = container_of(cfs_hash_dd_hhead(hs, bd),
@@ -414,7 +414,7 @@
 }
 
 static int
-cfs_hash_dd_hnode_del(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_dd_hnode_del(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		      struct hlist_node *hnd)
 {
 	cfs_hash_dhead_dep_t *dh = container_of(cfs_hash_dd_hhead(hs, bd),
@@ -457,7 +457,7 @@
 };
 
 static void
-cfs_hash_hlist_setup(cfs_hash_t *hs)
+cfs_hash_hlist_setup(struct cfs_hash *hs)
 {
 	if (cfs_hash_with_add_tail(hs)) {
 		hs->hs_hops = cfs_hash_with_depth(hs) ?
@@ -469,8 +469,8 @@
 }
 
 static void
-cfs_hash_bd_from_key(cfs_hash_t *hs, cfs_hash_bucket_t **bkts,
-		     unsigned int bits, const void *key, cfs_hash_bd_t *bd)
+cfs_hash_bd_from_key(struct cfs_hash *hs, struct cfs_hash_bucket **bkts,
+		     unsigned int bits, const void *key, struct cfs_hash_bd *bd)
 {
 	unsigned int index = cfs_hash_id(hs, key, (1U << bits) - 1);
 
@@ -481,7 +481,7 @@
 }
 
 void
-cfs_hash_bd_get(cfs_hash_t *hs, const void *key, cfs_hash_bd_t *bd)
+cfs_hash_bd_get(struct cfs_hash *hs, const void *key, struct cfs_hash_bd *bd)
 {
 	/* NB: caller should hold hs->hs_rwlock if REHASH is set */
 	if (likely(hs->hs_rehash_buckets == NULL)) {
@@ -496,7 +496,7 @@
 EXPORT_SYMBOL(cfs_hash_bd_get);
 
 static inline void
-cfs_hash_bd_dep_record(cfs_hash_t *hs, cfs_hash_bd_t *bd, int dep_cur)
+cfs_hash_bd_dep_record(struct cfs_hash *hs, struct cfs_hash_bd *bd, int dep_cur)
 {
 	if (likely(dep_cur <= bd->bd_bucket->hsb_depmax))
 		return;
@@ -519,7 +519,7 @@
 }
 
 void
-cfs_hash_bd_add_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_bd_add_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		       struct hlist_node *hnode)
 {
 	int		rc;
@@ -539,7 +539,7 @@
 EXPORT_SYMBOL(cfs_hash_bd_add_locked);
 
 void
-cfs_hash_bd_del_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_bd_del_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		       struct hlist_node *hnode)
 {
 	hs->hs_hops->hop_hnode_del(hs, bd, hnode);
@@ -560,11 +560,11 @@
 EXPORT_SYMBOL(cfs_hash_bd_del_locked);
 
 void
-cfs_hash_bd_move_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd_old,
-			cfs_hash_bd_t *bd_new, struct hlist_node *hnode)
+cfs_hash_bd_move_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd_old,
+			struct cfs_hash_bd *bd_new, struct hlist_node *hnode)
 {
-	cfs_hash_bucket_t *obkt = bd_old->bd_bucket;
-	cfs_hash_bucket_t *nbkt = bd_new->bd_bucket;
+	struct cfs_hash_bucket *obkt = bd_old->bd_bucket;
+	struct cfs_hash_bucket *nbkt = bd_new->bd_bucket;
 	int		rc;
 
 	if (cfs_hash_bd_compare(bd_old, bd_new) == 0)
@@ -617,7 +617,7 @@
 } cfs_hash_lookup_intent_t;
 
 static struct hlist_node *
-cfs_hash_bd_lookup_intent(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_bd_lookup_intent(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			  const void *key, struct hlist_node *hnode,
 			  cfs_hash_lookup_intent_t intent)
 
@@ -658,7 +658,7 @@
 }
 
 struct hlist_node *
-cfs_hash_bd_lookup_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd, const void *key)
+cfs_hash_bd_lookup_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd, const void *key)
 {
 	return cfs_hash_bd_lookup_intent(hs, bd, key, NULL,
 					 CFS_HS_LOOKUP_IT_FIND);
@@ -666,7 +666,7 @@
 EXPORT_SYMBOL(cfs_hash_bd_lookup_locked);
 
 struct hlist_node *
-cfs_hash_bd_peek_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd, const void *key)
+cfs_hash_bd_peek_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd, const void *key)
 {
 	return cfs_hash_bd_lookup_intent(hs, bd, key, NULL,
 					 CFS_HS_LOOKUP_IT_PEEK);
@@ -674,7 +674,7 @@
 EXPORT_SYMBOL(cfs_hash_bd_peek_locked);
 
 struct hlist_node *
-cfs_hash_bd_findadd_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_bd_findadd_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			   const void *key, struct hlist_node *hnode,
 			   int noref)
 {
@@ -685,7 +685,7 @@
 EXPORT_SYMBOL(cfs_hash_bd_findadd_locked);
 
 struct hlist_node *
-cfs_hash_bd_finddel_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_bd_finddel_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			   const void *key, struct hlist_node *hnode)
 {
 	/* hnode can be NULL, we find the first item with @key */
@@ -695,10 +695,10 @@
 EXPORT_SYMBOL(cfs_hash_bd_finddel_locked);
 
 static void
-cfs_hash_multi_bd_lock(cfs_hash_t *hs, cfs_hash_bd_t *bds,
+cfs_hash_multi_bd_lock(struct cfs_hash *hs, struct cfs_hash_bd *bds,
 		       unsigned n, int excl)
 {
-	cfs_hash_bucket_t *prev = NULL;
+	struct cfs_hash_bucket *prev = NULL;
 	int		i;
 
 	/**
@@ -718,10 +718,10 @@
 }
 
 static void
-cfs_hash_multi_bd_unlock(cfs_hash_t *hs, cfs_hash_bd_t *bds,
+cfs_hash_multi_bd_unlock(struct cfs_hash *hs, struct cfs_hash_bd *bds,
 			 unsigned n, int excl)
 {
-	cfs_hash_bucket_t *prev = NULL;
+	struct cfs_hash_bucket *prev = NULL;
 	int		i;
 
 	cfs_hash_for_each_bd(bds, n, i) {
@@ -733,7 +733,7 @@
 }
 
 static struct hlist_node *
-cfs_hash_multi_bd_lookup_locked(cfs_hash_t *hs, cfs_hash_bd_t *bds,
+cfs_hash_multi_bd_lookup_locked(struct cfs_hash *hs, struct cfs_hash_bd *bds,
 				unsigned n, const void *key)
 {
 	struct hlist_node  *ehnode;
@@ -749,8 +749,8 @@
 }
 
 static struct hlist_node *
-cfs_hash_multi_bd_findadd_locked(cfs_hash_t *hs,
-				 cfs_hash_bd_t *bds, unsigned n, const void *key,
+cfs_hash_multi_bd_findadd_locked(struct cfs_hash *hs,
+				 struct cfs_hash_bd *bds, unsigned n, const void *key,
 				 struct hlist_node *hnode, int noref)
 {
 	struct hlist_node  *ehnode;
@@ -770,7 +770,7 @@
 	if (i == 1) { /* only one bucket */
 		cfs_hash_bd_add_locked(hs, &bds[0], hnode);
 	} else {
-		cfs_hash_bd_t      mybd;
+		struct cfs_hash_bd      mybd;
 
 		cfs_hash_bd_get(hs, key, &mybd);
 		cfs_hash_bd_add_locked(hs, &mybd, hnode);
@@ -780,7 +780,7 @@
 }
 
 static struct hlist_node *
-cfs_hash_multi_bd_finddel_locked(cfs_hash_t *hs, cfs_hash_bd_t *bds,
+cfs_hash_multi_bd_finddel_locked(struct cfs_hash *hs, struct cfs_hash_bd *bds,
 				 unsigned n, const void *key,
 				 struct hlist_node *hnode)
 {
@@ -797,7 +797,7 @@
 }
 
 static void
-cfs_hash_bd_order(cfs_hash_bd_t *bd1, cfs_hash_bd_t *bd2)
+cfs_hash_bd_order(struct cfs_hash_bd *bd1, struct cfs_hash_bd *bd2)
 {
 	int     rc;
 
@@ -815,7 +815,7 @@
 		bd2->bd_bucket = NULL;
 
 	} else if (rc > 0) { /* swab bd1 and bd2 */
-		cfs_hash_bd_t tmp;
+		struct cfs_hash_bd tmp;
 
 		tmp = *bd2;
 		*bd2 = *bd1;
@@ -824,7 +824,7 @@
 }
 
 void
-cfs_hash_dual_bd_get(cfs_hash_t *hs, const void *key, cfs_hash_bd_t *bds)
+cfs_hash_dual_bd_get(struct cfs_hash *hs, const void *key, struct cfs_hash_bd *bds)
 {
 	/* NB: caller should hold hs_lock.rw if REHASH is set */
 	cfs_hash_bd_from_key(hs, hs->hs_buckets,
@@ -844,21 +844,21 @@
 EXPORT_SYMBOL(cfs_hash_dual_bd_get);
 
 void
-cfs_hash_dual_bd_lock(cfs_hash_t *hs, cfs_hash_bd_t *bds, int excl)
+cfs_hash_dual_bd_lock(struct cfs_hash *hs, struct cfs_hash_bd *bds, int excl)
 {
 	cfs_hash_multi_bd_lock(hs, bds, 2, excl);
 }
 EXPORT_SYMBOL(cfs_hash_dual_bd_lock);
 
 void
-cfs_hash_dual_bd_unlock(cfs_hash_t *hs, cfs_hash_bd_t *bds, int excl)
+cfs_hash_dual_bd_unlock(struct cfs_hash *hs, struct cfs_hash_bd *bds, int excl)
 {
 	cfs_hash_multi_bd_unlock(hs, bds, 2, excl);
 }
 EXPORT_SYMBOL(cfs_hash_dual_bd_unlock);
 
 struct hlist_node *
-cfs_hash_dual_bd_lookup_locked(cfs_hash_t *hs, cfs_hash_bd_t *bds,
+cfs_hash_dual_bd_lookup_locked(struct cfs_hash *hs, struct cfs_hash_bd *bds,
 			       const void *key)
 {
 	return cfs_hash_multi_bd_lookup_locked(hs, bds, 2, key);
@@ -866,7 +866,7 @@
 EXPORT_SYMBOL(cfs_hash_dual_bd_lookup_locked);
 
 struct hlist_node *
-cfs_hash_dual_bd_findadd_locked(cfs_hash_t *hs, cfs_hash_bd_t *bds,
+cfs_hash_dual_bd_findadd_locked(struct cfs_hash *hs, struct cfs_hash_bd *bds,
 				const void *key, struct hlist_node *hnode,
 				int noref)
 {
@@ -876,7 +876,7 @@
 EXPORT_SYMBOL(cfs_hash_dual_bd_findadd_locked);
 
 struct hlist_node *
-cfs_hash_dual_bd_finddel_locked(cfs_hash_t *hs, cfs_hash_bd_t *bds,
+cfs_hash_dual_bd_finddel_locked(struct cfs_hash *hs, struct cfs_hash_bd *bds,
 				const void *key, struct hlist_node *hnode)
 {
 	return cfs_hash_multi_bd_finddel_locked(hs, bds, 2, key, hnode);
@@ -884,7 +884,7 @@
 EXPORT_SYMBOL(cfs_hash_dual_bd_finddel_locked);
 
 static void
-cfs_hash_buckets_free(cfs_hash_bucket_t **buckets,
+cfs_hash_buckets_free(struct cfs_hash_bucket **buckets,
 		      int bkt_size, int prev_size, int size)
 {
 	int     i;
@@ -902,11 +902,11 @@
  * needed, the newly allocated buckets if allocation was needed and
  * successful, and NULL on error.
  */
-static cfs_hash_bucket_t **
-cfs_hash_buckets_realloc(cfs_hash_t *hs, cfs_hash_bucket_t **old_bkts,
+static struct cfs_hash_bucket **
+cfs_hash_buckets_realloc(struct cfs_hash *hs, struct cfs_hash_bucket **old_bkts,
 			 unsigned int old_size, unsigned int new_size)
 {
-	cfs_hash_bucket_t **new_bkts;
+	struct cfs_hash_bucket **new_bkts;
 	int		 i;
 
 	LASSERT(old_size == 0 || old_bkts != NULL);
@@ -925,7 +925,7 @@
 
 	for (i = old_size; i < new_size; i++) {
 		struct hlist_head *hhead;
-		cfs_hash_bd_t     bd;
+		struct cfs_hash_bd     bd;
 
 		LIBCFS_ALLOC(new_bkts[i], cfs_hash_bkt_size(hs));
 		if (new_bkts[i] == NULL) {
@@ -969,7 +969,7 @@
 #if CFS_HASH_DEBUG_LEVEL >= CFS_HASH_DEBUG_1
 static int cfs_hash_dep_print(cfs_workitem_t *wi)
 {
-	cfs_hash_t *hs = container_of(wi, cfs_hash_t, hs_dep_wi);
+	struct cfs_hash *hs = container_of(wi, struct cfs_hash, hs_dep_wi);
 	int	 dep;
 	int	 bkt;
 	int	 off;
@@ -990,13 +990,13 @@
 	return 0;
 }
 
-static void cfs_hash_depth_wi_init(cfs_hash_t *hs)
+static void cfs_hash_depth_wi_init(struct cfs_hash *hs)
 {
 	spin_lock_init(&hs->hs_dep_lock);
 	cfs_wi_init(&hs->hs_dep_wi, hs, cfs_hash_dep_print);
 }
 
-static void cfs_hash_depth_wi_cancel(cfs_hash_t *hs)
+static void cfs_hash_depth_wi_cancel(struct cfs_hash *hs)
 {
 	if (cfs_wi_deschedule(cfs_sched_rehash, &hs->hs_dep_wi))
 		return;
@@ -1012,18 +1012,18 @@
 
 #else /* CFS_HASH_DEBUG_LEVEL < CFS_HASH_DEBUG_1 */
 
-static inline void cfs_hash_depth_wi_init(cfs_hash_t *hs) {}
-static inline void cfs_hash_depth_wi_cancel(cfs_hash_t *hs) {}
+static inline void cfs_hash_depth_wi_init(struct cfs_hash *hs) {}
+static inline void cfs_hash_depth_wi_cancel(struct cfs_hash *hs) {}
 
 #endif /* CFS_HASH_DEBUG_LEVEL >= CFS_HASH_DEBUG_1 */
 
-cfs_hash_t *
+struct cfs_hash *
 cfs_hash_create(char *name, unsigned cur_bits, unsigned max_bits,
 		unsigned bkt_bits, unsigned extra_bytes,
 		unsigned min_theta, unsigned max_theta,
 		cfs_hash_ops_t *ops, unsigned flags)
 {
-	cfs_hash_t *hs;
+	struct cfs_hash *hs;
 	int	 len;
 
 	CLASSERT(CFS_HASH_THETA_BITS < 15);
@@ -1051,7 +1051,7 @@
 
 	len = (flags & CFS_HASH_BIGNAME) == 0 ?
 	      CFS_HASH_NAME_LEN : CFS_HASH_BIGNAME_LEN;
-	LIBCFS_ALLOC(hs, offsetof(cfs_hash_t, hs_name[len]));
+	LIBCFS_ALLOC(hs, offsetof(struct cfs_hash, hs_name[len]));
 	if (hs == NULL)
 		return NULL;
 
@@ -1084,7 +1084,7 @@
 	if (hs->hs_buckets != NULL)
 		return hs;
 
-	LIBCFS_FREE(hs, offsetof(cfs_hash_t, hs_name[len]));
+	LIBCFS_FREE(hs, offsetof(struct cfs_hash, hs_name[len]));
 	return NULL;
 }
 EXPORT_SYMBOL(cfs_hash_create);
@@ -1093,11 +1093,11 @@
  * Cleanup libcfs hash @hs.
  */
 static void
-cfs_hash_destroy(cfs_hash_t *hs)
+cfs_hash_destroy(struct cfs_hash *hs)
 {
 	struct hlist_node     *hnode;
 	struct hlist_node     *pos;
-	cfs_hash_bd_t	 bd;
+	struct cfs_hash_bd	 bd;
 	int		   i;
 
 	LASSERT(hs != NULL);
@@ -1148,10 +1148,10 @@
 			      0, CFS_HASH_NBKT(hs));
 	i = cfs_hash_with_bigname(hs) ?
 	    CFS_HASH_BIGNAME_LEN : CFS_HASH_NAME_LEN;
-	LIBCFS_FREE(hs, offsetof(cfs_hash_t, hs_name[i]));
+	LIBCFS_FREE(hs, offsetof(struct cfs_hash, hs_name[i]));
 }
 
-cfs_hash_t *cfs_hash_getref(cfs_hash_t *hs)
+struct cfs_hash *cfs_hash_getref(struct cfs_hash *hs)
 {
 	if (atomic_inc_not_zero(&hs->hs_refcount))
 		return hs;
@@ -1159,7 +1159,7 @@
 }
 EXPORT_SYMBOL(cfs_hash_getref);
 
-void cfs_hash_putref(cfs_hash_t *hs)
+void cfs_hash_putref(struct cfs_hash *hs)
 {
 	if (atomic_dec_and_test(&hs->hs_refcount))
 		cfs_hash_destroy(hs);
@@ -1167,7 +1167,7 @@
 EXPORT_SYMBOL(cfs_hash_putref);
 
 static inline int
-cfs_hash_rehash_bits(cfs_hash_t *hs)
+cfs_hash_rehash_bits(struct cfs_hash *hs)
 {
 	if (cfs_hash_with_no_lock(hs) ||
 	    !cfs_hash_with_rehash(hs))
@@ -1204,7 +1204,7 @@
  * - too many elements
  */
 static inline int
-cfs_hash_rehash_inline(cfs_hash_t *hs)
+cfs_hash_rehash_inline(struct cfs_hash *hs)
 {
 	return !cfs_hash_with_nblk_change(hs) &&
 	       atomic_read(&hs->hs_count) < CFS_HASH_LOOP_HOG;
@@ -1215,9 +1215,9 @@
  * ops->hs_get function will be called when the item is added.
  */
 void
-cfs_hash_add(cfs_hash_t *hs, const void *key, struct hlist_node *hnode)
+cfs_hash_add(struct cfs_hash *hs, const void *key, struct hlist_node *hnode)
 {
-	cfs_hash_bd_t   bd;
+	struct cfs_hash_bd   bd;
 	int	     bits;
 
 	LASSERT(hlist_unhashed(hnode));
@@ -1238,11 +1238,11 @@
 EXPORT_SYMBOL(cfs_hash_add);
 
 static struct hlist_node *
-cfs_hash_find_or_add(cfs_hash_t *hs, const void *key,
+cfs_hash_find_or_add(struct cfs_hash *hs, const void *key,
 		     struct hlist_node *hnode, int noref)
 {
 	struct hlist_node *ehnode;
-	cfs_hash_bd_t     bds[2];
+	struct cfs_hash_bd     bds[2];
 	int	       bits = 0;
 
 	LASSERT(hlist_unhashed(hnode));
@@ -1270,7 +1270,7 @@
  * Returns 0 on success or -EALREADY on key collisions.
  */
 int
-cfs_hash_add_unique(cfs_hash_t *hs, const void *key, struct hlist_node *hnode)
+cfs_hash_add_unique(struct cfs_hash *hs, const void *key, struct hlist_node *hnode)
 {
 	return cfs_hash_find_or_add(hs, key, hnode, 1) != hnode ?
 	       -EALREADY : 0;
@@ -1284,7 +1284,7 @@
  * Otherwise ops->hs_get is called on the item which was added.
  */
 void *
-cfs_hash_findadd_unique(cfs_hash_t *hs, const void *key,
+cfs_hash_findadd_unique(struct cfs_hash *hs, const void *key,
 			struct hlist_node *hnode)
 {
 	hnode = cfs_hash_find_or_add(hs, key, hnode, 0);
@@ -1301,11 +1301,11 @@
  * on the removed object.
  */
 void *
-cfs_hash_del(cfs_hash_t *hs, const void *key, struct hlist_node *hnode)
+cfs_hash_del(struct cfs_hash *hs, const void *key, struct hlist_node *hnode)
 {
 	void	   *obj  = NULL;
 	int	     bits = 0;
-	cfs_hash_bd_t   bds[2];
+	struct cfs_hash_bd   bds[2];
 
 	cfs_hash_lock(hs, 0);
 	cfs_hash_dual_bd_get_and_lock(hs, key, bds, 1);
@@ -1341,7 +1341,7 @@
  * will be returned and ops->hs_put is called on the removed object.
  */
 void *
-cfs_hash_del_key(cfs_hash_t *hs, const void *key)
+cfs_hash_del_key(struct cfs_hash *hs, const void *key)
 {
 	return cfs_hash_del(hs, key, NULL);
 }
@@ -1356,11 +1356,11 @@
  * in the hash @hs NULL is returned.
  */
 void *
-cfs_hash_lookup(cfs_hash_t *hs, const void *key)
+cfs_hash_lookup(struct cfs_hash *hs, const void *key)
 {
 	void		 *obj = NULL;
 	struct hlist_node     *hnode;
-	cfs_hash_bd_t	 bds[2];
+	struct cfs_hash_bd	 bds[2];
 
 	cfs_hash_lock(hs, 0);
 	cfs_hash_dual_bd_get_and_lock(hs, key, bds, 0);
@@ -1377,7 +1377,7 @@
 EXPORT_SYMBOL(cfs_hash_lookup);
 
 static void
-cfs_hash_for_each_enter(cfs_hash_t *hs)
+cfs_hash_for_each_enter(struct cfs_hash *hs)
 {
 	LASSERT(!cfs_hash_is_exiting(hs));
 
@@ -1403,7 +1403,7 @@
 }
 
 static void
-cfs_hash_for_each_exit(cfs_hash_t *hs)
+cfs_hash_for_each_exit(struct cfs_hash *hs)
 {
 	int remained;
 	int bits;
@@ -1434,12 +1434,12 @@
  *      cfs_hash_bd_del_locked
  */
 static __u64
-cfs_hash_for_each_tight(cfs_hash_t *hs, cfs_hash_for_each_cb_t func,
+cfs_hash_for_each_tight(struct cfs_hash *hs, cfs_hash_for_each_cb_t func,
 			void *data, int remove_safe)
 {
 	struct hlist_node     *hnode;
 	struct hlist_node     *pos;
-	cfs_hash_bd_t	 bd;
+	struct cfs_hash_bd	 bd;
 	__u64		 count = 0;
 	int		   excl  = !!remove_safe;
 	int		   loop  = 0;
@@ -1492,7 +1492,7 @@
 } cfs_hash_cond_arg_t;
 
 static int
-cfs_hash_cond_del_locked(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_cond_del_locked(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			 struct hlist_node *hnode, void *data)
 {
 	cfs_hash_cond_arg_t *cond = data;
@@ -1508,7 +1508,7 @@
  * any object be reference.
  */
 void
-cfs_hash_cond_del(cfs_hash_t *hs, cfs_hash_cond_opt_cb_t func, void *data)
+cfs_hash_cond_del(struct cfs_hash *hs, cfs_hash_cond_opt_cb_t func, void *data)
 {
 	cfs_hash_cond_arg_t arg = {
 		.func   = func,
@@ -1520,7 +1520,7 @@
 EXPORT_SYMBOL(cfs_hash_cond_del);
 
 void
-cfs_hash_for_each(cfs_hash_t *hs,
+cfs_hash_for_each(struct cfs_hash *hs,
 		  cfs_hash_for_each_cb_t func, void *data)
 {
 	cfs_hash_for_each_tight(hs, func, data, 0);
@@ -1528,7 +1528,7 @@
 EXPORT_SYMBOL(cfs_hash_for_each);
 
 void
-cfs_hash_for_each_safe(cfs_hash_t *hs,
+cfs_hash_for_each_safe(struct cfs_hash *hs,
 		       cfs_hash_for_each_cb_t func, void *data)
 {
 	cfs_hash_for_each_tight(hs, func, data, 1);
@@ -1536,7 +1536,7 @@
 EXPORT_SYMBOL(cfs_hash_for_each_safe);
 
 static int
-cfs_hash_peek(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+cfs_hash_peek(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 	      struct hlist_node *hnode, void *data)
 {
 	*(int *)data = 0;
@@ -1544,7 +1544,7 @@
 }
 
 int
-cfs_hash_is_empty(cfs_hash_t *hs)
+cfs_hash_is_empty(struct cfs_hash *hs)
 {
 	int empty = 1;
 
@@ -1554,7 +1554,7 @@
 EXPORT_SYMBOL(cfs_hash_is_empty);
 
 __u64
-cfs_hash_size_get(cfs_hash_t *hs)
+cfs_hash_size_get(struct cfs_hash *hs)
 {
 	return cfs_hash_with_counter(hs) ?
 	       atomic_read(&hs->hs_count) :
@@ -1578,11 +1578,11 @@
  * two cases, so iteration has to be stopped on change.
  */
 static int
-cfs_hash_for_each_relax(cfs_hash_t *hs, cfs_hash_for_each_cb_t func, void *data)
+cfs_hash_for_each_relax(struct cfs_hash *hs, cfs_hash_for_each_cb_t func, void *data)
 {
 	struct hlist_node *hnode;
 	struct hlist_node *tmp;
-	cfs_hash_bd_t     bd;
+	struct cfs_hash_bd     bd;
 	__u32	     version;
 	int	       count = 0;
 	int	       stop_on_change;
@@ -1639,7 +1639,7 @@
 }
 
 int
-cfs_hash_for_each_nolock(cfs_hash_t *hs,
+cfs_hash_for_each_nolock(struct cfs_hash *hs,
 			 cfs_hash_for_each_cb_t func, void *data)
 {
 	if (cfs_hash_with_no_lock(hs) ||
@@ -1672,7 +1672,7 @@
  * the required locking is in place to prevent concurrent insertions.
  */
 int
-cfs_hash_for_each_empty(cfs_hash_t *hs,
+cfs_hash_for_each_empty(struct cfs_hash *hs,
 			cfs_hash_for_each_cb_t func, void *data)
 {
 	unsigned  i = 0;
@@ -1696,12 +1696,12 @@
 EXPORT_SYMBOL(cfs_hash_for_each_empty);
 
 void
-cfs_hash_hlist_for_each(cfs_hash_t *hs, unsigned hindex,
+cfs_hash_hlist_for_each(struct cfs_hash *hs, unsigned hindex,
 			cfs_hash_for_each_cb_t func, void *data)
 {
 	struct hlist_head   *hhead;
 	struct hlist_node   *hnode;
-	cfs_hash_bd_t       bd;
+	struct cfs_hash_bd       bd;
 
 	cfs_hash_for_each_enter(hs);
 	cfs_hash_lock(hs, 0);
@@ -1731,11 +1731,11 @@
  * is held so the callback must never sleep.
    */
 void
-cfs_hash_for_each_key(cfs_hash_t *hs, const void *key,
+cfs_hash_for_each_key(struct cfs_hash *hs, const void *key,
 		      cfs_hash_for_each_cb_t func, void *data)
 {
 	struct hlist_node   *hnode;
-	cfs_hash_bd_t       bds[2];
+	struct cfs_hash_bd       bds[2];
 	unsigned	    i;
 
 	cfs_hash_lock(hs, 0);
@@ -1772,7 +1772,7 @@
  * theta thresholds for @hs are tunable via cfs_hash_set_theta().
  */
 void
-cfs_hash_rehash_cancel_locked(cfs_hash_t *hs)
+cfs_hash_rehash_cancel_locked(struct cfs_hash *hs)
 {
 	int     i;
 
@@ -1801,7 +1801,7 @@
 EXPORT_SYMBOL(cfs_hash_rehash_cancel_locked);
 
 void
-cfs_hash_rehash_cancel(cfs_hash_t *hs)
+cfs_hash_rehash_cancel(struct cfs_hash *hs)
 {
 	cfs_hash_lock(hs, 1);
 	cfs_hash_rehash_cancel_locked(hs);
@@ -1810,7 +1810,7 @@
 EXPORT_SYMBOL(cfs_hash_rehash_cancel);
 
 int
-cfs_hash_rehash(cfs_hash_t *hs, int do_rehash)
+cfs_hash_rehash(struct cfs_hash *hs, int do_rehash)
 {
 	int     rc;
 
@@ -1840,9 +1840,9 @@
 EXPORT_SYMBOL(cfs_hash_rehash);
 
 static int
-cfs_hash_rehash_bd(cfs_hash_t *hs, cfs_hash_bd_t *old)
+cfs_hash_rehash_bd(struct cfs_hash *hs, struct cfs_hash_bd *old)
 {
-	cfs_hash_bd_t      new;
+	struct cfs_hash_bd      new;
 	struct hlist_head  *hhead;
 	struct hlist_node  *hnode;
 	struct hlist_node  *pos;
@@ -1873,9 +1873,9 @@
 static int
 cfs_hash_rehash_worker(cfs_workitem_t *wi)
 {
-	cfs_hash_t	 *hs = container_of(wi, cfs_hash_t, hs_rehash_wi);
-	cfs_hash_bucket_t **bkts;
-	cfs_hash_bd_t       bd;
+	struct cfs_hash	 *hs = container_of(wi, struct cfs_hash, hs_rehash_wi);
+	struct cfs_hash_bucket **bkts;
+	struct cfs_hash_bd       bd;
 	unsigned int	old_size;
 	unsigned int	new_size;
 	int		 bsize;
@@ -1965,7 +1965,7 @@
 	if (bkts != NULL)
 		cfs_hash_buckets_free(bkts, bsize, new_size, old_size);
 	if (rc != 0)
-		CDEBUG(D_INFO, "early quit of of rehashing: %d\n", rc);
+		CDEBUG(D_INFO, "early quit of rehashing: %d\n", rc);
 	/* return 1 only if cfs_wi_exit is called */
 	return rc == -ESRCH;
 }
@@ -1980,12 +1980,12 @@
  * the registered cfs_hash_get() and cfs_hash_put() functions will
  * not be called.
  */
-void cfs_hash_rehash_key(cfs_hash_t *hs, const void *old_key,
+void cfs_hash_rehash_key(struct cfs_hash *hs, const void *old_key,
 			 void *new_key, struct hlist_node *hnode)
 {
-	cfs_hash_bd_t	bds[3];
-	cfs_hash_bd_t	old_bds[2];
-	cfs_hash_bd_t	new_bd;
+	struct cfs_hash_bd	bds[3];
+	struct cfs_hash_bd	old_bds[2];
+	struct cfs_hash_bd	new_bd;
 
 	LASSERT(!hlist_unhashed(hnode));
 
@@ -2028,8 +2028,8 @@
 }
 EXPORT_SYMBOL(cfs_hash_debug_header);
 
-static cfs_hash_bucket_t **
-cfs_hash_full_bkts(cfs_hash_t *hs)
+static struct cfs_hash_bucket **
+cfs_hash_full_bkts(struct cfs_hash *hs)
 {
 	/* NB: caller should hold hs->hs_rwlock if REHASH is set */
 	if (hs->hs_rehash_buckets == NULL)
@@ -2041,7 +2041,7 @@
 }
 
 static unsigned int
-cfs_hash_full_nbkt(cfs_hash_t *hs)
+cfs_hash_full_nbkt(struct cfs_hash *hs)
 {
 	/* NB: caller should hold hs->hs_rwlock if REHASH is set */
 	if (hs->hs_rehash_buckets == NULL)
@@ -2052,7 +2052,7 @@
 	       CFS_HASH_RH_NBKT(hs) : CFS_HASH_NBKT(hs);
 }
 
-int cfs_hash_debug_str(cfs_hash_t *hs, struct seq_file *m)
+int cfs_hash_debug_str(struct cfs_hash *hs, struct seq_file *m)
 {
 	int		    dist[8] = { 0, };
 	int		    maxdep  = -1;
@@ -2089,7 +2089,7 @@
 	 * Non-Uniform hash distribution:  128/125/0/0/0/0/2/1
 	 */
 	for (i = 0; i < cfs_hash_full_nbkt(hs); i++) {
-		cfs_hash_bd_t  bd;
+		struct cfs_hash_bd  bd;
 
 		bd.bd_bucket = cfs_hash_full_bkts(hs)[i];
 		cfs_hash_bd_lock(hs, &bd, 0);
diff --git a/drivers/staging/lustre/lustre/libcfs/linux/linux-curproc.c b/drivers/staging/lustre/lustre/libcfs/linux/linux-curproc.c
index ea9e949..0bf8e5d 100644
--- a/drivers/staging/lustre/lustre/libcfs/linux/linux-curproc.c
+++ b/drivers/staging/lustre/lustre/libcfs/linux/linux-curproc.c
@@ -167,7 +167,7 @@
 		return 0;
 
 	down_read(&mm->mmap_sem);
-	/* ignore errors, just check how much was sucessfully transfered */
+	/* ignore errors, just check how much was successfully transferred */
 	while (len) {
 		int bytes, rc, offset;
 		void *maddr;
@@ -227,8 +227,10 @@
 	 * which is already holding mmap_sem for writes.  If some other
 	 * thread gets the write lock in the meantime, this thread will
 	 * block, but at least it won't deadlock on itself.  LU-1735 */
-	if (down_read_trylock(&mm->mmap_sem) == 0)
+	if (down_read_trylock(&mm->mmap_sem) == 0) {
+		kfree(buffer);
 		return -EDEADLK;
+	}
 	up_read(&mm->mmap_sem);
 
 	addr = mm->env_start;
diff --git a/drivers/staging/lustre/lustre/libcfs/linux/linux-debug.c b/drivers/staging/lustre/lustre/libcfs/linux/linux-debug.c
index ab1e731..cc565b1 100644
--- a/drivers/staging/lustre/lustre/libcfs/linux/linux-debug.c
+++ b/drivers/staging/lustre/lustre/libcfs/linux/linux-debug.c
@@ -137,7 +137,7 @@
 	char *argv[6];
 	char buf[32];
 
-	snprintf (buf, sizeof buf, "%d", msgdata->msg_line);
+	snprintf(buf, sizeof(buf), "%d", msgdata->msg_line);
 
 	argv[1] = "LBUG";
 	argv[2] = (char *)msgdata->msg_file;
diff --git a/drivers/staging/lustre/lustre/libcfs/prng.c b/drivers/staging/lustre/lustre/libcfs/prng.c
index 69224d8..f87e9e5 100644
--- a/drivers/staging/lustre/lustre/libcfs/prng.c
+++ b/drivers/staging/lustre/lustre/libcfs/prng.c
@@ -70,7 +70,7 @@
  * cfs_rand - creates new seeds
  *
  * First it creates new seeds from the previous seeds. Then it generates a
- * new psuedo random number for use.
+ * new pseudo random number for use.
  *
  * Returns a pseudo-random 32-bit integer
  */
@@ -84,7 +84,7 @@
 EXPORT_SYMBOL(cfs_rand);
 
 /**
- * cfs_srand - sets the inital seed
+ * cfs_srand - sets the initial seed
  * @seed1 : (seed_x) should have the most entropy in the low bits of the word
  * @seed2 : (seed_y) should have the most entropy in the high bits of the word
  *
diff --git a/drivers/staging/lustre/lustre/libcfs/tracefile.c b/drivers/staging/lustre/lustre/libcfs/tracefile.c
index 357f400..f71a3cc 100644
--- a/drivers/staging/lustre/lustre/libcfs/tracefile.c
+++ b/drivers/staging/lustre/lustre/libcfs/tracefile.c
@@ -276,7 +276,7 @@
 	int			remain;
 	int			mask = msgdata->msg_mask;
 	const char		*file = kbasename(msgdata->msg_file);
-	cfs_debug_limit_state_t   *cdls = msgdata->msg_cdls;
+	struct cfs_debug_limit_state   *cdls = msgdata->msg_cdls;
 
 	tcd = cfs_trace_get_tcd();
 
diff --git a/drivers/staging/lustre/lustre/llite/dir.c b/drivers/staging/lustre/lustre/llite/dir.c
index 09844be..1f07903 100644
--- a/drivers/staging/lustre/lustre/llite/dir.c
+++ b/drivers/staging/lustre/lustre/llite/dir.c
@@ -743,7 +743,7 @@
 
 	/* In the following we use the fact that LOV_USER_MAGIC_V1 and
 	 LOV_USER_MAGIC_V3 have the same initial fields so we do not
-	 need the make the distiction between the 2 versions */
+	 need to make the distinction between the 2 versions */
 	if (set_default && mgc->u.cli.cl_mgc_mgsexp) {
 		char *param = NULL;
 		char *buf;
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index bc534db..fb85a58 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -364,7 +364,7 @@
 	   that case that lock is also ok */
 	/* We can also get here if there was cached open handle in revalidate_it
 	 * but it disappeared while we were getting from there to ll_file_open.
-	 * But this means this file was closed and immediatelly opened which
+	 * But this means this file was closed and immediately opened which
 	 * makes a good candidate for using OPEN lock */
 	/* If lmmsize & lmm are not 0, we are just setting stripe info
 	 * parameters. No need for the open lock */
@@ -2456,8 +2456,8 @@
 	if (rc == -ENOENT) {
 		clear_nlink(inode);
 		/* This path cannot be hit for regular files unless in
-		 * case of obscure races, so no need to to validate
-		 * size. */
+		 * case of obscure races, so no need to validate size.
+		 */
 		if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode))
 			return 0;
 	} else if (rc != 0) {
@@ -3011,7 +3011,7 @@
 
 	/* set layout to file. Unlikely this will fail as old layout was
 	 * surely eliminated */
-	memset(&conf, 0, sizeof conf);
+	memset(&conf, 0, sizeof(conf));
 	conf.coc_opc = OBJECT_CONF_SET;
 	conf.coc_inode = inode;
 	conf.coc_lock = lock;
@@ -3034,7 +3034,7 @@
 			ll_get_fsname(inode->i_sb, NULL, 0),
 			inode, PFID(&lli->lli_fid));
 
-		memset(&conf, 0, sizeof conf);
+		memset(&conf, 0, sizeof(conf));
 		conf.coc_opc = OBJECT_CONF_WAIT;
 		conf.coc_inode = inode;
 		rc = ll_layout_conf(inode, &conf);
diff --git a/drivers/staging/lustre/lustre/llite/llite_close.c b/drivers/staging/lustre/lustre/llite/llite_close.c
index 1f5825c8..e2996c4 100644
--- a/drivers/staging/lustre/lustre/llite/llite_close.c
+++ b/drivers/staging/lustre/lustre/llite/llite_close.c
@@ -159,7 +159,7 @@
 		}
 		if (flags & LLIF_DONE_WRITING) {
 			/* Some pages are still dirty, it is early to send
-			 * DONE_WRITE. Wait untill all pages will be flushed
+			 * DONE_WRITE. Wait until all pages will be flushed
 			 * and try DONE_WRITE again later. */
 			LASSERT(!(lli->lli_flags & LLIF_DONE_WRITING));
 			lli->lli_flags |= LLIF_DONE_WRITING;
diff --git a/drivers/staging/lustre/lustre/llite/llite_lib.c b/drivers/staging/lustre/lustre/llite/llite_lib.c
index b868c2b..fd584ff 100644
--- a/drivers/staging/lustre/lustre/llite/llite_lib.c
+++ b/drivers/staging/lustre/lustre/llite/llite_lib.c
@@ -1973,10 +1973,10 @@
 	OBD_ALLOC_PTR(ioc_data);
 	if (ioc_data) {
 		obd_iocontrol(IOC_OSC_SET_ACTIVE, sbi->ll_md_exp,
-			      sizeof *ioc_data, ioc_data, NULL);
+			      sizeof(*ioc_data), ioc_data, NULL);
 
 		obd_iocontrol(IOC_OSC_SET_ACTIVE, sbi->ll_dt_exp,
-			      sizeof *ioc_data, ioc_data, NULL);
+			      sizeof(*ioc_data), ioc_data, NULL);
 
 		OBD_FREE_PTR(ioc_data);
 	}
diff --git a/drivers/staging/lustre/lustre/llite/lloop.c b/drivers/staging/lustre/lustre/llite/lloop.c
index 2340458..e2421ea 100644
--- a/drivers/staging/lustre/lustre/llite/lloop.c
+++ b/drivers/staging/lustre/lustre/llite/lloop.c
@@ -337,8 +337,7 @@
 	return count;
 }
 
-static ll_mrf_ret
-loop_make_request(struct request_queue *q, struct bio *old_bio)
+static void loop_make_request(struct request_queue *q, struct bio *old_bio)
 {
 	struct lloop_device *lo = q->queuedata;
 	int rw = bio_rw(old_bio);
@@ -366,10 +365,9 @@
 		goto err;
 	}
 	loop_add_bio(lo, old_bio);
-	LL_MRF_RETURN(0);
+	return;
 err:
 	cfs_bio_io_error(old_bio, old_bio->bi_size);
-	LL_MRF_RETURN(0);
 }
 
 
diff --git a/drivers/staging/lustre/lustre/llite/lproc_llite.c b/drivers/staging/lustre/lustre/llite/lproc_llite.c
index d4d3c17..4bf09c4 100644
--- a/drivers/staging/lustre/lustre/llite/lproc_llite.c
+++ b/drivers/staging/lustre/lustre/llite/lproc_llite.c
@@ -1063,7 +1063,7 @@
 		return 0;
 	}
 	seq_printf(seq, "snapshot_time:	 %lu.%lu (secs.usecs)\n",
-		   now.tv_sec, now.tv_usec);
+		   now.tv_sec, (unsigned long)now.tv_usec);
 	seq_printf(seq, "%15s %19s       | %20s\n", " ", "read", "write");
 	seq_printf(seq, "%13s   %14s %4s %4s  | %14s %4s %4s\n",
 		   "extents", "calls", "%", "cum%",
@@ -1127,7 +1127,7 @@
 		return 0;
 	}
 	seq_printf(seq, "snapshot_time:	 %lu.%lu (secs.usecs)\n",
-		   now.tv_sec, now.tv_usec);
+		   now.tv_sec, (unsigned long)now.tv_usec);
 
 	seq_printf(seq, "%15s %19s       | %20s\n", " ", "read", "write");
 	seq_printf(seq, "%13s   %14s %4s %4s  | %14s %4s %4s\n",
@@ -1293,7 +1293,7 @@
 	spin_lock(&sbi->ll_process_lock);
 
 	seq_printf(seq, "snapshot_time:	 %lu.%lu (secs.usecs)\n",
-		   now.tv_sec, now.tv_usec);
+		   now.tv_sec, (unsigned long)now.tv_usec);
 	seq_printf(seq, "%3s %10s %14s %14s %17s %17s %14s\n",
 		   "R/W", "PID", "RANGE START", "RANGE END",
 		   "SMALLEST EXTENT", "LARGEST EXTENT", "OFFSET");
diff --git a/drivers/staging/lustre/lustre/llite/rw.c b/drivers/staging/lustre/lustre/llite/rw.c
index ae0dc44..e9ba38a 100644
--- a/drivers/staging/lustre/lustre/llite/rw.c
+++ b/drivers/staging/lustre/lustre/llite/rw.c
@@ -717,7 +717,7 @@
 	lli = ll_i2info(inode);
 	clob = lli->lli_clob;
 
-	memset(ria, 0, sizeof *ria);
+	memset(ria, 0, sizeof(*ria));
 
 	cl_object_attr_lock(clob);
 	ret = cl_object_attr_get(env, clob, attr);
diff --git a/drivers/staging/lustre/lustre/llite/rw26.c b/drivers/staging/lustre/lustre/llite/rw26.c
index 96c29ad..7e3e096 100644
--- a/drivers/staging/lustre/lustre/llite/rw26.c
+++ b/drivers/staging/lustre/lustre/llite/rw26.c
@@ -202,11 +202,8 @@
 
 	OBD_ALLOC_LARGE(*pages, *max_pages * sizeof(**pages));
 	if (*pages) {
-		down_read(&current->mm->mmap_sem);
-		result = get_user_pages(current, current->mm, user_addr,
-					*max_pages, (rw == READ), 0, *pages,
-					NULL);
-		up_read(&current->mm->mmap_sem);
+		result = get_user_pages_fast(user_addr, *max_pages,
+					     (rw == READ), *pages);
 		if (unlikely(result <= 0))
 			OBD_FREE_LARGE(*pages, *max_pages * sizeof(**pages));
 	}
diff --git a/drivers/staging/lustre/lustre/llite/statahead.c b/drivers/staging/lustre/lustre/llite/statahead.c
index 8eaa38e9..f6b5f4b9 100644
--- a/drivers/staging/lustre/lustre/llite/statahead.c
+++ b/drivers/staging/lustre/lustre/llite/statahead.c
@@ -647,7 +647,7 @@
 		 */
 		LASSERT(fid_is_zero(&minfo->mi_data.op_fid2));
 
-		/* XXX: No fid in reply, this is probaly cross-ref case.
+		/* XXX: No fid in reply, this is probably cross-ref case.
 		 * SA can't handle it yet. */
 		if (body->valid & OBD_MD_MDS)
 			GOTO(out, rc = -EAGAIN);
diff --git a/drivers/staging/lustre/lustre/llite/vvp_dev.c b/drivers/staging/lustre/lustre/llite/vvp_dev.c
index be125b9..c4d1580 100644
--- a/drivers/staging/lustre/lustre/llite/vvp_dev.c
+++ b/drivers/staging/lustre/lustre/llite/vvp_dev.c
@@ -297,7 +297,7 @@
 		((__u64)id->vpi_bucket << PGC_OBJ_SHIFT);
 }
 
-static int vvp_pgcache_obj_get(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+static int vvp_pgcache_obj_get(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			       struct hlist_node *hnode, void *data)
 {
 	struct vvp_pgcache_id   *id  = data;
diff --git a/drivers/staging/lustre/lustre/lov/lov_cl_internal.h b/drivers/staging/lustre/lustre/lov/lov_cl_internal.h
index 33d9ce6..4276124 100644
--- a/drivers/staging/lustre/lustre/lov/lov_cl_internal.h
+++ b/drivers/staging/lustre/lustre/lov/lov_cl_internal.h
@@ -564,50 +564,50 @@
 
 extern struct kmem_cache *lov_lock_link_kmem;
 
-int   lov_object_init     (const struct lu_env *env, struct lu_object *obj,
+int   lov_object_init(const struct lu_env *env, struct lu_object *obj,
 			   const struct lu_object_conf *conf);
-int   lovsub_object_init  (const struct lu_env *env, struct lu_object *obj,
+int   lovsub_object_init(const struct lu_env *env, struct lu_object *obj,
 			   const struct lu_object_conf *conf);
-int   lov_lock_init       (const struct lu_env *env, struct cl_object *obj,
+int   lov_lock_init(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_lock *lock, const struct cl_io *io);
-int   lov_io_init	 (const struct lu_env *env, struct cl_object *obj,
+int   lov_io_init(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_io *io);
-int   lovsub_lock_init    (const struct lu_env *env, struct cl_object *obj,
+int   lovsub_lock_init(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_lock *lock, const struct cl_io *io);
 
-int   lov_lock_init_raid0 (const struct lu_env *env, struct cl_object *obj,
+int   lov_lock_init_raid0(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_lock *lock, const struct cl_io *io);
-int   lov_lock_init_empty (const struct lu_env *env, struct cl_object *obj,
+int   lov_lock_init_empty(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_lock *lock, const struct cl_io *io);
-int   lov_io_init_raid0   (const struct lu_env *env, struct cl_object *obj,
+int   lov_io_init_raid0(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_io *io);
-int   lov_io_init_empty   (const struct lu_env *env, struct cl_object *obj,
+int   lov_io_init_empty(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_io *io);
 int   lov_io_init_released(const struct lu_env *env, struct cl_object *obj,
 			   struct cl_io *io);
-void  lov_lock_unlink     (const struct lu_env *env, struct lov_lock_link *link,
+void  lov_lock_unlink(const struct lu_env *env, struct lov_lock_link *link,
 			   struct lovsub_lock *sub);
 
 struct lov_io_sub *lov_sub_get(const struct lu_env *env, struct lov_io *lio,
 			       int stripe);
-void  lov_sub_put	     (struct lov_io_sub *sub);
-int   lov_sublock_modify  (const struct lu_env *env, struct lov_lock *lov,
+void  lov_sub_put(struct lov_io_sub *sub);
+int   lov_sublock_modify(const struct lu_env *env, struct lov_lock *lov,
 			   struct lovsub_lock *sublock,
 			   const struct cl_lock_descr *d, int idx);
 
 
-int   lov_page_init       (const struct lu_env *env, struct cl_object *ob,
+int   lov_page_init(const struct lu_env *env, struct cl_object *ob,
 			   struct cl_page *page, struct page *vmpage);
-int   lovsub_page_init    (const struct lu_env *env, struct cl_object *ob,
+int   lovsub_page_init(const struct lu_env *env, struct cl_object *ob,
 			   struct cl_page *page, struct page *vmpage);
 
-int   lov_page_init_empty (const struct lu_env *env,
+int   lov_page_init_empty(const struct lu_env *env,
 			   struct cl_object *obj,
 			   struct cl_page *page, struct page *vmpage);
-int   lov_page_init_raid0 (const struct lu_env *env,
+int   lov_page_init_raid0(const struct lu_env *env,
 			   struct cl_object *obj,
 			   struct cl_page *page, struct page *vmpage);
-struct lu_object *lov_object_alloc   (const struct lu_env *env,
+struct lu_object *lov_object_alloc(const struct lu_env *env,
 				      const struct lu_object_header *hdr,
 				      struct lu_device *dev);
 struct lu_object *lovsub_object_alloc(const struct lu_env *env,
@@ -617,7 +617,7 @@
 struct lov_lock_link *lov_lock_link_find(const struct lu_env *env,
 					 struct lov_lock *lck,
 					 struct lovsub_lock *sub);
-struct lov_io_sub    *lov_page_subio    (const struct lu_env *env,
+struct lov_io_sub    *lov_page_subio(const struct lu_env *env,
 					 struct lov_io *lio,
 					 const struct cl_page_slice *slice);
 
diff --git a/drivers/staging/lustre/lustre/lov/lov_dev.c b/drivers/staging/lustre/lustre/lov/lov_dev.c
index a4006ef..1f33b04 100644
--- a/drivers/staging/lustre/lustre/lov/lov_dev.c
+++ b/drivers/staging/lustre/lustre/lov/lov_dev.c
@@ -44,6 +44,8 @@
 #include <obd_class.h>
 
 #include "lov_cl_internal.h"
+#include "lov_internal.h"
+
 
 struct kmem_cache *lov_lock_kmem;
 struct kmem_cache *lov_object_kmem;
@@ -64,47 +66,47 @@
 	{
 		.ckd_cache = &lov_lock_kmem,
 		.ckd_name  = "lov_lock_kmem",
-		.ckd_size  = sizeof (struct lov_lock)
+		.ckd_size  = sizeof(struct lov_lock)
 	},
 	{
 		.ckd_cache = &lov_object_kmem,
 		.ckd_name  = "lov_object_kmem",
-		.ckd_size  = sizeof (struct lov_object)
+		.ckd_size  = sizeof(struct lov_object)
 	},
 	{
 		.ckd_cache = &lov_thread_kmem,
 		.ckd_name  = "lov_thread_kmem",
-		.ckd_size  = sizeof (struct lov_thread_info)
+		.ckd_size  = sizeof(struct lov_thread_info)
 	},
 	{
 		.ckd_cache = &lov_session_kmem,
 		.ckd_name  = "lov_session_kmem",
-		.ckd_size  = sizeof (struct lov_session)
+		.ckd_size  = sizeof(struct lov_session)
 	},
 	{
 		.ckd_cache = &lov_req_kmem,
 		.ckd_name  = "lov_req_kmem",
-		.ckd_size  = sizeof (struct lov_req)
+		.ckd_size  = sizeof(struct lov_req)
 	},
 	{
 		.ckd_cache = &lovsub_lock_kmem,
 		.ckd_name  = "lovsub_lock_kmem",
-		.ckd_size  = sizeof (struct lovsub_lock)
+		.ckd_size  = sizeof(struct lovsub_lock)
 	},
 	{
 		.ckd_cache = &lovsub_object_kmem,
 		.ckd_name  = "lovsub_object_kmem",
-		.ckd_size  = sizeof (struct lovsub_object)
+		.ckd_size  = sizeof(struct lovsub_object)
 	},
 	{
 		.ckd_cache = &lovsub_req_kmem,
 		.ckd_name  = "lovsub_req_kmem",
-		.ckd_size  = sizeof (struct lovsub_req)
+		.ckd_size  = sizeof(struct lovsub_req)
 	},
 	{
 		.ckd_cache = &lov_lock_link_kmem,
 		.ckd_name  = "lov_lock_link_kmem",
-		.ckd_size  = sizeof (struct lov_lock_link)
+		.ckd_size  = sizeof(struct lov_lock_link)
 	},
 	{
 		.ckd_cache = NULL
@@ -286,7 +288,7 @@
 			OBD_FREE_PTR(em);
 		}
 	}
-	OBD_FREE(emrg, nr * sizeof emrg[0]);
+	OBD_FREE(emrg, nr * sizeof(emrg[0]));
 }
 
 static struct lu_device *lov_device_free(const struct lu_env *env,
@@ -297,7 +299,7 @@
 
 	cl_device_fini(lu2cl_dev(d));
 	if (ld->ld_target != NULL)
-		OBD_FREE(ld->ld_target, nr * sizeof ld->ld_target[0]);
+		OBD_FREE(ld->ld_target, nr * sizeof(ld->ld_target[0]));
 	if (ld->ld_emrg != NULL)
 		lov_emerg_free(ld->ld_emrg, nr);
 	OBD_FREE_PTR(ld);
@@ -321,7 +323,7 @@
 	int i;
 	int result;
 
-	OBD_ALLOC(emerg, nr * sizeof emerg[0]);
+	OBD_ALLOC(emerg, nr * sizeof(emerg[0]));
 	if (emerg == NULL)
 		return ERR_PTR(-ENOMEM);
 	for (result = i = 0; i < nr && result == 0; i++) {
@@ -361,7 +363,7 @@
 	if (sub_size < tgt_size) {
 		struct lovsub_device    **newd;
 		struct lov_device_emerg **emerg;
-		const size_t	      sz   = sizeof newd[0];
+		const size_t	      sz   = sizeof(newd[0]);
 
 		emerg = lov_emerg_alloc(tgt_size);
 		if (IS_ERR(emerg))
@@ -446,7 +448,7 @@
 	cmd = cfg->lcfg_command;
 	rc = lov_process_config_base(d->ld_obd, cfg, &index, &gen);
 	if (rc == 0) {
-		switch(cmd) {
+		switch (cmd) {
 		case LCFG_LOV_ADD_OBD:
 		case LCFG_LOV_ADD_INA:
 			rc = lov_cl_add_target(env, d, index);
diff --git a/drivers/staging/lustre/lustre/lov/lov_internal.h b/drivers/staging/lustre/lustre/lov/lov_internal.h
index 16770d1..796da89 100644
--- a/drivers/staging/lustre/lustre/lov/lov_internal.h
+++ b/drivers/staging/lustre/lustre/lov/lov_internal.h
@@ -89,6 +89,8 @@
 
 extern struct kmem_cache *lov_oinfo_slab;
 
+extern struct lu_kmem_descr lov_caches[];
+
 void lov_finish_set(struct lov_request_set *set);
 
 static inline void lov_get_reqset(struct lov_request_set *set)
@@ -124,7 +126,7 @@
 		if (atomic_read(&llh->llh_refcount))
 			return;
 
-		OBD_FREE_RCU(llh, sizeof *llh +
+		OBD_FREE_RCU(llh, sizeof(*llh) +
 			     sizeof(*llh->llh_handles) * llh->llh_stripe_count,
 			     &llh->llh_handle);
 	}
diff --git a/drivers/staging/lustre/lustre/lov/lov_io.c b/drivers/staging/lustre/lustre/lov/lov_io.c
index b611aa4..2792fa5 100644
--- a/drivers/staging/lustre/lustre/lov/lov_io.c
+++ b/drivers/staging/lustre/lustre/lov/lov_io.c
@@ -86,7 +86,7 @@
 	struct lov_stripe_md *lsm    = lio->lis_object->lo_lsm;
 	struct cl_io	 *parent = lio->lis_cl.cis_io;
 
-	switch(io->ci_type) {
+	switch (io->ci_type) {
 	case CIT_SETATTR: {
 		io->u.ci_setattr.sa_attr = parent->u.ci_setattr.sa_attr;
 		io->u.ci_setattr.sa_valid = parent->u.ci_setattr.sa_valid;
@@ -282,7 +282,7 @@
 	 * when writing a page. -jay
 	 */
 	OBD_ALLOC_LARGE(lio->lis_subs,
-			lsm->lsm_stripe_count * sizeof lio->lis_subs[0]);
+			lsm->lsm_stripe_count * sizeof(lio->lis_subs[0]));
 	if (lio->lis_subs != NULL) {
 		lio->lis_nr_subios = lio->lis_stripe_count;
 		lio->lis_single_subio_index = -1;
@@ -356,7 +356,7 @@
 		for (i = 0; i < lio->lis_nr_subios; i++)
 			lov_io_sub_fini(env, lio, &lio->lis_subs[i]);
 		OBD_FREE_LARGE(lio->lis_subs,
-			 lio->lis_nr_subios * sizeof lio->lis_subs[0]);
+			 lio->lis_nr_subios * sizeof(lio->lis_subs[0]));
 		lio->lis_nr_subios = 0;
 	}
 
diff --git a/drivers/staging/lustre/lustre/lov/lov_lock.c b/drivers/staging/lustre/lustre/lov/lov_lock.c
index ec297e8..26bc719 100644
--- a/drivers/staging/lustre/lustre/lov/lov_lock.c
+++ b/drivers/staging/lustre/lustre/lov/lov_lock.c
@@ -88,7 +88,7 @@
 			subenv->lse_io  = sub->sub_io;
 			subenv->lse_sub = sub;
 		} else {
-			subenv = (void*)sub;
+			subenv = (void *)sub;
 		}
 	}
 	return subenv;
@@ -167,7 +167,7 @@
 			lov_sublock_env_put(subenv);
 		} else {
 			/* error occurs. */
-			sublock = (void*)subenv;
+			sublock = (void *)subenv;
 		}
 
 		if (!IS_ERR(sublock))
@@ -313,7 +313,7 @@
 			nr++;
 	}
 	LASSERT(nr > 0);
-	OBD_ALLOC_LARGE(lck->lls_sub, nr * sizeof lck->lls_sub[0]);
+	OBD_ALLOC_LARGE(lck->lls_sub, nr * sizeof(lck->lls_sub[0]));
 	if (lck->lls_sub == NULL)
 		return -ENOMEM;
 
@@ -474,7 +474,7 @@
 			 */
 			LASSERT(lck->lls_sub[i].sub_lock == NULL);
 		OBD_FREE_LARGE(lck->lls_sub,
-			       lck->lls_nr * sizeof lck->lls_sub[0]);
+			       lck->lls_nr * sizeof(lck->lls_sub[0]));
 	}
 	OBD_SLAB_FREE_PTR(lck, lov_lock_kmem);
 }
@@ -742,7 +742,7 @@
 				continue;
 			}
 
-			switch(sublock->cll_state) {
+			switch (sublock->cll_state) {
 			case CLS_HELD:
 				rc = cl_unuse_try(subenv->lse_env, sublock);
 				lov_sublock_release(env, lck, i, 0, 0);
diff --git a/drivers/staging/lustre/lustre/lov/lov_obd.c b/drivers/staging/lustre/lustre/lov/lov_obd.c
index 0b47aba..4783450 100644
--- a/drivers/staging/lustre/lustre/lov/lov_obd.c
+++ b/drivers/staging/lustre/lustre/lov/lov_obd.c
@@ -554,7 +554,7 @@
 		struct lov_tgt_desc **newtgts, **old = NULL;
 		__u32 newsize, oldsize = 0;
 
-		newsize = max(lov->lov_tgt_size, (__u32)2);
+		newsize = max_t(__u32, lov->lov_tgt_size, 2);
 		while (newsize < index + 1)
 			newsize = newsize << 1;
 		OBD_ALLOC(newtgts, sizeof(*newtgts) * newsize);
@@ -923,7 +923,7 @@
 	int cmd;
 	int rc = 0;
 
-	switch(cmd = lcfg->lcfg_command) {
+	switch (cmd = lcfg->lcfg_command) {
 	case LCFG_LOV_ADD_OBD:
 	case LCFG_LOV_ADD_INA:
 	case LCFG_LOV_DEL_OBD: {
@@ -1090,7 +1090,7 @@
 	if (rc)
 		GOTO(out, rc);
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		if (oa->o_valid & OBD_MD_FLCOOKIE)
@@ -1141,7 +1141,7 @@
 	if (rc)
 		return rc;
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		CDEBUG(D_INFO, "objid "DOSTID"[%d] has subobj "DOSTID" at idx"
@@ -1227,7 +1227,7 @@
 
 	if (!list_empty(&rqset->set_requests)) {
 		LASSERT(rc == 0);
-		LASSERT (rqset->set_interpret == NULL);
+		LASSERT(rqset->set_interpret == NULL);
 		rqset->set_interpret = lov_getattr_interpret;
 		rqset->set_arg = (void *)lovset;
 		return rc;
@@ -1267,7 +1267,7 @@
 	if (rc)
 		return rc;
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		rc = obd_setattr(env, lov->lov_tgts[req->rq_idx]->ltd_exp,
@@ -1408,7 +1408,7 @@
 	if (rc)
 		return rc;
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		rc = obd_punch(env, lov->lov_tgts[req->rq_idx]->ltd_exp,
@@ -1472,7 +1472,7 @@
 	CDEBUG(D_INFO, "fsync objid "DOSTID" ["LPX64", "LPX64"]\n",
 	       POSTID(&set->set_oi->oi_oa->o_oi), start, end);
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		rc = obd_sync(env, lov->lov_tgts[req->rq_idx]->ltd_exp,
@@ -1557,7 +1557,7 @@
 	if (rc)
 		return rc;
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		struct obd_export *sub_exp;
 		struct brw_page *sub_pga;
 		req = list_entry(pos, struct lov_request, rq_link);
@@ -1612,7 +1612,7 @@
 	if (rc)
 		return rc;
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		rc = obd_enqueue(lov->lov_tgts[req->rq_idx]->ltd_exp,
@@ -1828,7 +1828,7 @@
 	if (rc)
 		return rc;
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 		rc = obd_statfs_async(lov->lov_tgts[req->rq_idx]->ltd_exp,
 				      &req->rq_oi, max_age, rqset);
@@ -1909,7 +1909,7 @@
 					 (int) sizeof(struct obd_uuid))))
 			return -EFAULT;
 
-		flags = uarg ? *(__u32*)uarg : 0;
+		flags = uarg ? *(__u32 *)uarg : 0;
 		/* got statfs data */
 		rc = obd_statfs(NULL, lov->lov_tgts[index]->ltd_exp, &stat_buf,
 				cfs_time_shift_64(-OBD_STATFS_CACHE_SECONDS),
@@ -2495,7 +2495,7 @@
 		GOTO(out, rc);
 	} else if (KEY_IS(KEY_CONNECT_FLAG)) {
 		struct lov_tgt_desc *tgt;
-		__u64 ost_idx = *((__u64*)val);
+		__u64 ost_idx = *((__u64 *)val);
 
 		LASSERT(*vallen == sizeof(__u64));
 		LASSERT(ost_idx < lov->desc.ld_tgt_count);
@@ -2564,7 +2564,7 @@
 
 	for (i = 0; i < count; i++, val = (char *)val + incr) {
 		if (next_id) {
-			tgt = lov->lov_tgts[((struct obd_id_info*)val)->idx];
+			tgt = lov->lov_tgts[((struct obd_id_info *)val)->idx];
 		} else {
 			tgt = lov->lov_tgts[i];
 		}
@@ -2593,9 +2593,9 @@
 		} else if (next_id) {
 			err = obd_set_info_async(env, tgt->ltd_exp,
 					 keylen, key, vallen,
-					 ((struct obd_id_info*)val)->data, set);
+					 ((struct obd_id_info *)val)->data, set);
 		} else if (capa) {
-			struct mds_capa_info *info = (struct mds_capa_info*)val;
+			struct mds_capa_info *info = (struct mds_capa_info *)val;
 
 			LASSERT(vallen == sizeof(*info));
 
@@ -2781,7 +2781,7 @@
 	.o_setup	       = lov_setup,
 	.o_precleanup	  = lov_precleanup,
 	.o_cleanup	     = lov_cleanup,
-	//.o_process_config      = lov_process_config,
+	/*.o_process_config      = lov_process_config,*/
 	.o_connect	     = lov_connect,
 	.o_disconnect	  = lov_disconnect,
 	.o_statfs	      = lov_statfs,
@@ -2823,8 +2823,6 @@
 
 struct kmem_cache *lov_oinfo_slab;
 
-extern struct lu_kmem_descr lov_caches[];
-
 int __init lov_init(void)
 {
 	struct lprocfs_static_vars lvars = { 0 };
diff --git a/drivers/staging/lustre/lustre/lov/lov_object.c b/drivers/staging/lustre/lustre/lov/lov_object.c
index 84e55ce..cf2fa8a 100644
--- a/drivers/staging/lustre/lustre/lov/lov_object.c
+++ b/drivers/staging/lustre/lustre/lov/lov_object.c
@@ -214,7 +214,7 @@
 	r0->lo_nr  = lsm->lsm_stripe_count;
 	LASSERT(r0->lo_nr <= lov_targets_nr(dev));
 
-	OBD_ALLOC_LARGE(r0->lo_sub, r0->lo_nr * sizeof r0->lo_sub[0]);
+	OBD_ALLOC_LARGE(r0->lo_sub, r0->lo_nr * sizeof(r0->lo_sub[0]));
 	if (r0->lo_sub != NULL) {
 		result = 0;
 		subconf->coc_inode = conf->coc_inode;
@@ -368,7 +368,7 @@
 	struct lov_layout_raid0 *r0 = &state->raid0;
 
 	if (r0->lo_sub != NULL) {
-		OBD_FREE_LARGE(r0->lo_sub, r0->lo_nr * sizeof r0->lo_sub[0]);
+		OBD_FREE_LARGE(r0->lo_sub, r0->lo_nr * sizeof(r0->lo_sub[0]));
 		r0->lo_sub = NULL;
 	}
 
diff --git a/drivers/staging/lustre/lustre/lov/lov_pack.c b/drivers/staging/lustre/lustre/lov/lov_pack.c
index 55ec267..ec6f6e05 100644
--- a/drivers/staging/lustre/lustre/lov/lov_pack.c
+++ b/drivers/staging/lustre/lustre/lov/lov_pack.c
@@ -121,7 +121,7 @@
 do {								    \
 	if (!(test)) lov_dump_lmm(D_ERROR, lmm);			\
 	LASSERT(test); /* so we know what assertion failed */	   \
-} while(0)
+} while (0)
 
 /* Pack LOV object metadata for disk storage.  It is packed in LE byte
  * order and is opaque to the networking layer.
@@ -630,22 +630,22 @@
 	/* FIXME: Bug 1185 - copy fields properly when structs change */
 	/* struct lov_user_md_v3 and struct lov_mds_md_v3 must be the same */
 	CLASSERT(sizeof(lum) == sizeof(struct lov_mds_md_v3));
-	CLASSERT(sizeof lum.lmm_objects[0] == sizeof lmmk->lmm_objects[0]);
+	CLASSERT(sizeof(lum.lmm_objects[0]) == sizeof(lmmk->lmm_objects[0]));
 
 	if ((cpu_to_le32(LOV_MAGIC) != LOV_MAGIC) &&
 	    ((lmmk->lmm_magic == cpu_to_le32(LOV_MAGIC_V1)) ||
 	    (lmmk->lmm_magic == cpu_to_le32(LOV_MAGIC_V3)))) {
 		lustre_swab_lov_mds_md(lmmk);
 		lustre_swab_lov_user_md_objects(
-				(struct lov_user_ost_data*)lmmk->lmm_objects,
+				(struct lov_user_ost_data *)lmmk->lmm_objects,
 				lmmk->lmm_stripe_count);
 	}
 	if (lum.lmm_magic == LOV_USER_MAGIC) {
 		/* User request for v1, we need skip lmm_pool_name */
 		if (lmmk->lmm_magic == LOV_MAGIC_V3) {
-			memmove((char*)(&lmmk->lmm_stripe_count) +
+			memmove((char *)(&lmmk->lmm_stripe_count) +
 				sizeof(lmmk->lmm_stripe_count),
-				((struct lov_mds_md_v3*)lmmk)->lmm_objects,
+				((struct lov_mds_md_v3 *)lmmk)->lmm_objects,
 				lmmk->lmm_stripe_count *
 				sizeof(struct lov_ost_data_v1));
 			lmm_size -= LOV_MAXPOOLNAME;
diff --git a/drivers/staging/lustre/lustre/lov/lov_pool.c b/drivers/staging/lustre/lustre/lov/lov_pool.c
index dd3c07d..a1701df 100644
--- a/drivers/staging/lustre/lustre/lov/lov_pool.c
+++ b/drivers/staging/lustre/lustre/lov/lov_pool.c
@@ -86,7 +86,7 @@
  * Chapter 6.4.
  * Addison Wesley, 1973
  */
-static __u32 pool_hashfn(cfs_hash_t *hash_body, const void *key, unsigned mask)
+static __u32 pool_hashfn(struct cfs_hash *hash_body, const void *key, unsigned mask)
 {
 	int i;
 	__u32 result;
@@ -125,7 +125,7 @@
 	return hlist_entry(hnode, struct pool_desc, pool_hash);
 }
 
-static void pool_hashrefcount_get(cfs_hash_t *hs, struct hlist_node *hnode)
+static void pool_hashrefcount_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct pool_desc *pool;
 
@@ -133,7 +133,7 @@
 	lov_pool_getref(pool);
 }
 
-static void pool_hashrefcount_put_locked(cfs_hash_t *hs,
+static void pool_hashrefcount_put_locked(struct cfs_hash *hs,
 					 struct hlist_node *hnode)
 {
 	struct pool_desc *pool;
diff --git a/drivers/staging/lustre/lustre/lov/lov_request.c b/drivers/staging/lustre/lustre/lov/lov_request.c
index 61e6d0b..bf324ae 100644
--- a/drivers/staging/lustre/lustre/lov/lov_request.c
+++ b/drivers/staging/lustre/lustre/lov/lov_request.c
@@ -245,7 +245,7 @@
 	osc_update_enqueue(lov_lockhp, loi, oi->oi_flags,
 			   &req->rq_oi.oi_md->lsm_oinfo[0]->loi_lvb, mode, rc);
 	if (rc == ELDLM_LOCK_ABORTED && (oi->oi_flags & LDLM_FL_HAS_INTENT))
-		memset(lov_lockhp, 0, sizeof *lov_lockhp);
+		memset(lov_lockhp, 0, sizeof(*lov_lockhp));
 	rc = lov_update_enqueue_lov(set->set_exp, lov_lockhp, loi, oi->oi_flags,
 				    req->rq_idx, &oi->oi_md->lsm_oi, rc);
 	lov_stripe_unlock(oi->oi_md);
@@ -343,7 +343,7 @@
 {
 	struct lov_lock_handles *llh;
 
-	OBD_ALLOC(llh, sizeof *llh +
+	OBD_ALLOC(llh, sizeof(*llh) +
 		  sizeof(*llh->llh_handles) * lsm->lsm_stripe_count);
 	if (llh == NULL)
 		return NULL;
@@ -630,7 +630,7 @@
 	if (tmp_oa == NULL)
 		GOTO(out, rc = -ENOMEM);
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		if (!req->rq_complete || req->rq_rc)
@@ -669,7 +669,7 @@
 	struct list_head *pos;
 	struct lov_request *req;
 
-	list_for_each (pos, &set->set_list) {
+	list_for_each(pos, &set->set_list) {
 		req = list_entry(pos, struct lov_request, rq_link);
 
 		if (!req->rq_complete || req->rq_rc)
@@ -1315,7 +1315,7 @@
 			(tot) = LOV_U64_MAX;			    \
 		else						    \
 			(tot) += (add);				 \
-	} while(0)
+	} while (0)
 
 int lov_fini_statfs(struct obd_device *obd, struct obd_statfs *osfs,int success)
 {
diff --git a/drivers/staging/lustre/lustre/lvfs/fsfilt.c b/drivers/staging/lustre/lustre/lvfs/fsfilt.c
index e86df73..0d6ed69 100644
--- a/drivers/staging/lustre/lustre/lvfs/fsfilt.c
+++ b/drivers/staging/lustre/lustre/lvfs/fsfilt.c
@@ -50,9 +50,8 @@
 
 	list_for_each(p, &fsfilt_types) {
 		found = list_entry(p, struct fsfilt_operations, fs_list);
-		if (!strcmp(found->fs_type, type)) {
+		if (!strcmp(found->fs_type, type))
 			return found;
-		}
 	}
 	return NULL;
 }
@@ -62,7 +61,8 @@
 	struct fsfilt_operations *found;
 
 	/* lock fsfilt_types list */
-	if ((found = fsfilt_search_type(fs_ops->fs_type))) {
+	found = fsfilt_search_type(fs_ops->fs_type);
+	if (found) {
 		if (found != fs_ops) {
 			CERROR("different operations for type %s\n",
 			       fs_ops->fs_type);
@@ -103,14 +103,16 @@
 	struct fsfilt_operations *fs_ops;
 
 	/* lock fsfilt_types list */
-	if (!(fs_ops = fsfilt_search_type(type))) {
+	fs_ops = fsfilt_search_type(type);
+	if (!fs_ops) {
 		char name[32];
 		int rc;
 
 		snprintf(name, sizeof(name) - 1, "fsfilt_%s", type);
 		name[sizeof(name) - 1] = '\0';
 
-		if (!(rc = request_module("%s", name))) {
+		rc = request_module("%s", name);
+		if (!rc) {
 			fs_ops = fsfilt_search_type(type);
 			CDEBUG(D_INFO, "Loaded module '%s'\n", name);
 			if (!fs_ops)
diff --git a/drivers/staging/lustre/lustre/lvfs/lvfs_lib.c b/drivers/staging/lustre/lustre/lvfs/lvfs_lib.c
index 97a8be2..b21e40c 100644
--- a/drivers/staging/lustre/lustre/lvfs/lvfs_lib.c
+++ b/drivers/staging/lustre/lustre/lvfs/lvfs_lib.c
@@ -154,11 +154,10 @@
 				spin_lock(&stats->ls_lock);
 			if (stats->ls_biggest_alloc_num <= cpuid)
 				stats->ls_biggest_alloc_num = cpuid + 1;
-			if (stats->ls_flags & LPROCFS_STATS_FLAG_IRQ_SAFE) {
+			if (stats->ls_flags & LPROCFS_STATS_FLAG_IRQ_SAFE)
 				spin_unlock_irqrestore(&stats->ls_lock, flags);
-			} else {
+			else
 				spin_unlock(&stats->ls_lock);
-			}
 		}
 		/* initialize the ls_percpu[cpuid] non-zero counter */
 		for (i = 0; i < stats->ls_num; ++i) {
diff --git a/drivers/staging/lustre/lustre/lvfs/lvfs_linux.c b/drivers/staging/lustre/lustre/lvfs/lvfs_linux.c
index 18e1b47..1ef06fe 100644
--- a/drivers/staging/lustre/lustre/lvfs/lvfs_linux.c
+++ b/drivers/staging/lustre/lustre/lvfs/lvfs_linux.c
@@ -65,9 +65,9 @@
 					      msg)
 # define ASSERT_KERNEL_CTXT(msg) LASSERTF(segment_eq(get_fs(), get_ds()), msg)
 #else
-# define ASSERT_CTXT_MAGIC(magic) do {} while(0)
-# define ASSERT_NOT_KERNEL_CTXT(msg) do {} while(0)
-# define ASSERT_KERNEL_CTXT(msg) do {} while(0)
+# define ASSERT_CTXT_MAGIC(magic) do {} while (0)
+# define ASSERT_NOT_KERNEL_CTXT(msg) do {} while (0)
+# define ASSERT_KERNEL_CTXT(msg) do {} while (0)
 #endif
 
 static void push_group_info(struct lvfs_run_ctxt *save,
@@ -80,7 +80,8 @@
 		struct cred *cred;
 		task_lock(current);
 		save->group_info = current_cred()->group_info;
-		if ((cred = prepare_creds())) {
+		cred = prepare_creds();
+		if (cred) {
 			cred->group_info = ginfo;
 			commit_creds(cred);
 		}
@@ -96,7 +97,8 @@
 	} else {
 		struct cred *cred;
 		task_lock(current);
-		if ((cred = prepare_creds())) {
+		cred = prepare_creds();
+		if (cred) {
 			cred->group_info = save->group_info;
 			commit_creds(cred);
 		}
@@ -112,7 +114,7 @@
 	if (new_ctx->dt != NULL)
 		return;
 
-	//ASSERT_NOT_KERNEL_CTXT("already in kernel context!\n");
+	/* ASSERT_NOT_KERNEL_CTXT("already in kernel context!\n"); */
 	ASSERT_CTXT_MAGIC(new_ctx->magic);
 	OBD_SET_CTXT_MAGIC(save);
 
@@ -137,7 +139,8 @@
 		save->luc.luc_fsgid = current_fsgid();
 		save->luc.luc_cap = current_cap();
 
-		if ((cred = prepare_creds())) {
+		cred = prepare_creds();
+		if (cred) {
 			cred->uid = uc->luc_uid;
 			cred->gid = uc->luc_gid;
 			cred->fsuid = uc->luc_fsuid;
@@ -180,7 +183,8 @@
 	current->fs->umask = saved->luc.luc_umask;
 	if (uc) {
 		struct cred *cred;
-		if ((cred = prepare_creds())) {
+		cred = prepare_creds();
+		if (cred) {
 			cred->uid = saved->luc.luc_uid;
 			cred->gid = saved->luc.luc_gid;
 			cred->fsuid = saved->luc.luc_fsuid;
@@ -253,32 +257,32 @@
 		return 0;
 
 	switch (field) {
-		case LPROCFS_FIELDS_FLAGS_CONFIG:
-			ret = header->lc_config;
-			break;
-		case LPROCFS_FIELDS_FLAGS_SUM:
-			ret = lc->lc_sum;
-			if ((flags & LPROCFS_STATS_FLAG_IRQ_SAFE) != 0)
-				ret += lc->lc_sum_irq;
-			break;
-		case LPROCFS_FIELDS_FLAGS_MIN:
-			ret = lc->lc_min;
-			break;
-		case LPROCFS_FIELDS_FLAGS_MAX:
-			ret = lc->lc_max;
-			break;
-		case LPROCFS_FIELDS_FLAGS_AVG:
-			ret = (lc->lc_max - lc->lc_min) / 2;
-			break;
-		case LPROCFS_FIELDS_FLAGS_SUMSQUARE:
-			ret = lc->lc_sumsquare;
-			break;
-		case LPROCFS_FIELDS_FLAGS_COUNT:
-			ret = lc->lc_count;
-			break;
-		default:
-			break;
-	};
+	case LPROCFS_FIELDS_FLAGS_CONFIG:
+		ret = header->lc_config;
+		break;
+	case LPROCFS_FIELDS_FLAGS_SUM:
+		ret = lc->lc_sum;
+		if ((flags & LPROCFS_STATS_FLAG_IRQ_SAFE) != 0)
+			ret += lc->lc_sum_irq;
+		break;
+	case LPROCFS_FIELDS_FLAGS_MIN:
+		ret = lc->lc_min;
+		break;
+	case LPROCFS_FIELDS_FLAGS_MAX:
+		ret = lc->lc_max;
+		break;
+	case LPROCFS_FIELDS_FLAGS_AVG:
+		ret = (lc->lc_max - lc->lc_min) / 2;
+		break;
+	case LPROCFS_FIELDS_FLAGS_SUMSQUARE:
+		ret = lc->lc_sumsquare;
+		break;
+	case LPROCFS_FIELDS_FLAGS_COUNT:
+		ret = lc->lc_count;
+		break;
+	default:
+		break;
+	}
 
 	return ret;
 }
diff --git a/drivers/staging/lustre/lustre/obdclass/cl_io.c b/drivers/staging/lustre/lustre/obdclass/cl_io.c
index 4269793..e048500 100644
--- a/drivers/staging/lustre/lustre/obdclass/cl_io.c
+++ b/drivers/staging/lustre/lustre/obdclass/cl_io.c
@@ -1387,7 +1387,7 @@
 				cl_object_put(env, obj);
 			}
 		}
-		OBD_FREE(req->crq_o, req->crq_nrobjs * sizeof req->crq_o[0]);
+		OBD_FREE(req->crq_o, req->crq_nrobjs * sizeof(req->crq_o[0]));
 	}
 	OBD_FREE_PTR(req);
 }
@@ -1452,7 +1452,7 @@
 	if (req != NULL) {
 		int result;
 
-		OBD_ALLOC(req->crq_o, nr_objects * sizeof req->crq_o[0]);
+		OBD_ALLOC(req->crq_o, nr_objects * sizeof(req->crq_o[0]));
 		if (req->crq_o != NULL) {
 			req->crq_nrobjs = nr_objects;
 			req->crq_type = crt;
@@ -1642,7 +1642,7 @@
 		cpu_relax();
 	}
 
-	POISON(anchor, 0x5a, sizeof *anchor);
+	POISON(anchor, 0x5a, sizeof(*anchor));
 	return rc;
 }
 EXPORT_SYMBOL(cl_sync_io_wait);
diff --git a/drivers/staging/lustre/lustre/obdclass/cl_object.c b/drivers/staging/lustre/lustre/obdclass/cl_object.c
index 7b0e9d2..1a92603 100644
--- a/drivers/staging/lustre/lustre/obdclass/cl_object.c
+++ b/drivers/staging/lustre/lustre/obdclass/cl_object.c
@@ -577,9 +577,9 @@
  * The implementation of using hash table to connect cl_env and thread
  */
 
-static cfs_hash_t *cl_env_hash;
+static struct cfs_hash *cl_env_hash;
 
-static unsigned cl_env_hops_hash(cfs_hash_t *lh,
+static unsigned cl_env_hops_hash(struct cfs_hash *lh,
 				 const void *key, unsigned mask)
 {
 #if BITS_PER_LONG == 64
@@ -604,7 +604,7 @@
 	return (key == cle->ce_owner);
 }
 
-static void cl_env_hops_noop(cfs_hash_t *hs, struct hlist_node *hn)
+static void cl_env_hops_noop(struct cfs_hash *hs, struct hlist_node *hn)
 {
 	struct cl_env *cle = hlist_entry(hn, struct cl_env, ce_node);
 	LASSERT(cle->ce_magic == &cl_env_init0);
diff --git a/drivers/staging/lustre/lustre/obdclass/class_obd.c b/drivers/staging/lustre/lustre/obdclass/class_obd.c
index b1024a6..4afd962 100644
--- a/drivers/staging/lustre/lustre/obdclass/class_obd.c
+++ b/drivers/staging/lustre/lustre/obdclass/class_obd.c
@@ -178,7 +178,7 @@
 static inline void obd_data2conn(struct lustre_handle *conn,
 				 struct obd_ioctl_data *data)
 {
-	memset(conn, 0, sizeof *conn);
+	memset(conn, 0, sizeof(*conn));
 	conn->cookie = data->ioc_cookie;
 }
 
diff --git a/drivers/staging/lustre/lustre/obdclass/genops.c b/drivers/staging/lustre/lustre/obdclass/genops.c
index 68fe71c..f6fae16 100644
--- a/drivers/staging/lustre/lustre/obdclass/genops.c
+++ b/drivers/staging/lustre/lustre/obdclass/genops.c
@@ -816,7 +816,7 @@
 				    struct obd_uuid *cluuid)
 {
 	struct obd_export *export;
-	cfs_hash_t *hash = NULL;
+	struct cfs_hash *hash = NULL;
 	int rc = 0;
 
 	OBD_ALLOC_PTR(export);
@@ -1384,7 +1384,7 @@
 
 int obd_export_evict_by_nid(struct obd_device *obd, const char *nid)
 {
-	cfs_hash_t *nid_hash;
+	struct cfs_hash *nid_hash;
 	struct obd_export *doomed_exp = NULL;
 	int exports_evicted = 0;
 
@@ -1432,7 +1432,7 @@
 
 int obd_export_evict_by_uuid(struct obd_device *obd, const char *uuid)
 {
-	cfs_hash_t *uuid_hash;
+	struct cfs_hash *uuid_hash;
 	struct obd_export *doomed_exp = NULL;
 	struct obd_uuid doomed_uuid;
 	int exports_evicted = 0;
diff --git a/drivers/staging/lustre/lustre/obdclass/llog_test.c b/drivers/staging/lustre/lustre/obdclass/llog_test.c
index d9e6d12..178f89e 100644
--- a/drivers/staging/lustre/lustre/obdclass/llog_test.c
+++ b/drivers/staging/lustre/lustre/obdclass/llog_test.c
@@ -242,7 +242,7 @@
 
 		hdr.lrh_len = 8;
 		hdr.lrh_type = OBD_CFG_REC;
-		memset(buf, 0, sizeof buf);
+		memset(buf, 0, sizeof(buf));
 		rc = llog_write(env, llh, &hdr, NULL, 0, buf, -1);
 		if (rc < 0) {
 			CERROR("3b: write 10 records failed at #%d: %d\n",
@@ -277,8 +277,8 @@
 		char			buf_even[24];
 		char			buf_odd[32];
 
-		memset(buf_odd, 0, sizeof buf_odd);
-		memset(buf_even, 0, sizeof buf_even);
+		memset(buf_odd, 0, sizeof(buf_odd));
+		memset(buf_even, 0, sizeof(buf_even));
 		if ((i % 2) == 0) {
 			hdr.lrh_len = 24;
 			hdr.lrh_type = OBD_CFG_REC;
diff --git a/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c b/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c
index a95f60a..02d76f8 100644
--- a/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c
+++ b/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c
@@ -898,7 +898,7 @@
 
 void lprocfs_free_per_client_stats(struct obd_device *obd)
 {
-	cfs_hash_t *hash = obd->obd_nid_stats_hash;
+	struct cfs_hash *hash = obd->obd_nid_stats_hash;
 	struct nid_stat *stat;
 
 	/* we need extra list - because hash_exit called to early */
@@ -1069,7 +1069,7 @@
 		struct timeval now;
 		do_gettimeofday(&now);
 		rc = seq_printf(p, "%-25s %lu.%lu secs.usecs\n",
-				"snapshot_time", now.tv_sec, now.tv_usec);
+				"snapshot_time", now.tv_sec, (unsigned long)now.tv_usec);
 		if (rc < 0)
 			return rc;
 	}
@@ -1422,7 +1422,7 @@
 }
 EXPORT_SYMBOL(lprocfs_init_ldlm_stats);
 
-int lprocfs_exp_print_uuid(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+int lprocfs_exp_print_uuid(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			   struct hlist_node *hnode, void *data)
 
 {
@@ -1453,7 +1453,7 @@
 	bool		first;
 };
 
-int lprocfs_exp_print_hash(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+int lprocfs_exp_print_hash(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 			   struct hlist_node *hnode, void *cb_data)
 
 {
diff --git a/drivers/staging/lustre/lustre/obdclass/lu_object.c b/drivers/staging/lustre/lustre/obdclass/lu_object.c
index 3a3d5bc..212823a 100644
--- a/drivers/staging/lustre/lustre/obdclass/lu_object.c
+++ b/drivers/staging/lustre/lustre/obdclass/lu_object.c
@@ -71,7 +71,7 @@
 	struct lu_object_header *top;
 	struct lu_site	  *site;
 	struct lu_object	*orig;
-	cfs_hash_bd_t	    bd;
+	struct cfs_hash_bd	    bd;
 	const struct lu_fid     *fid;
 
 	top  = o->lo_header;
@@ -175,8 +175,8 @@
 	top = o->lo_header;
 	set_bit(LU_OBJECT_HEARD_BANSHEE, &top->loh_flags);
 	if (!test_and_set_bit(LU_OBJECT_UNHASHED, &top->loh_flags)) {
-		cfs_hash_t *obj_hash = o->lo_dev->ld_site->ls_obj_hash;
-		cfs_hash_bd_t bd;
+		struct cfs_hash *obj_hash = o->lo_dev->ld_site->ls_obj_hash;
+		struct cfs_hash_bd bd;
 
 		cfs_hash_bd_get_and_lock(obj_hash, &top->loh_fid, &bd, 1);
 		list_del_init(&top->loh_lru);
@@ -306,8 +306,8 @@
 	struct lu_object_header *h;
 	struct lu_object_header *temp;
 	struct lu_site_bkt_data *bkt;
-	cfs_hash_bd_t	    bd;
-	cfs_hash_bd_t	    bd2;
+	struct cfs_hash_bd	    bd;
+	struct cfs_hash_bd	    bd2;
 	struct list_head	       dispose;
 	int		      did_sth;
 	int		      start;
@@ -526,7 +526,7 @@
 EXPORT_SYMBOL(lu_object_invariant);
 
 static struct lu_object *htable_lookup(struct lu_site *s,
-				       cfs_hash_bd_t *bd,
+				       struct cfs_hash_bd *bd,
 				       const struct lu_fid *f,
 				       wait_queue_t *waiter,
 				       __u64 *version)
@@ -589,8 +589,8 @@
 				       const struct lu_object_conf *conf)
 {
 	struct lu_object	*o;
-	cfs_hash_t	      *hs;
-	cfs_hash_bd_t	    bd;
+	struct cfs_hash	      *hs;
+	struct cfs_hash_bd	    bd;
 	struct lu_site_bkt_data *bkt;
 
 	o = lu_object_alloc(env, dev, f, conf);
@@ -618,8 +618,8 @@
 	struct lu_object      *o;
 	struct lu_object      *shadow;
 	struct lu_site	*s;
-	cfs_hash_t	    *hs;
-	cfs_hash_bd_t	  bd;
+	struct cfs_hash	    *hs;
+	struct cfs_hash_bd	  bd;
 	__u64		  version = 0;
 
 	/*
@@ -788,7 +788,7 @@
 };
 
 static int
-lu_site_obj_print(cfs_hash_t *hs, cfs_hash_bd_t *bd,
+lu_site_obj_print(struct cfs_hash *hs, struct cfs_hash_bd *bd,
 		  struct hlist_node *hnode, void *data)
 {
 	struct lu_site_print_arg *arg = (struct lu_site_print_arg *)data;
@@ -874,7 +874,7 @@
 	return bits;
 }
 
-static unsigned lu_obj_hop_hash(cfs_hash_t *hs,
+static unsigned lu_obj_hop_hash(struct cfs_hash *hs,
 				const void *key, unsigned mask)
 {
 	struct lu_fid  *fid = (struct lu_fid *)key;
@@ -914,14 +914,14 @@
 	return lu_fid_eq(&h->loh_fid, (struct lu_fid *)key);
 }
 
-static void lu_obj_hop_get(cfs_hash_t *hs, struct hlist_node *hnode)
+static void lu_obj_hop_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct lu_object_header *h;
 
 	h = hlist_entry(hnode, struct lu_object_header, loh_hash);
 	if (atomic_add_return(1, &h->loh_ref) == 1) {
 		struct lu_site_bkt_data *bkt;
-		cfs_hash_bd_t	    bd;
+		struct cfs_hash_bd	    bd;
 
 		cfs_hash_bd_get(hs, &h->loh_fid, &bd);
 		bkt = cfs_hash_bd_extra_get(hs, &bd);
@@ -929,7 +929,7 @@
 	}
 }
 
-static void lu_obj_hop_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+static void lu_obj_hop_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	LBUG(); /* we should never called it */
 }
@@ -975,12 +975,12 @@
 int lu_site_init(struct lu_site *s, struct lu_device *top)
 {
 	struct lu_site_bkt_data *bkt;
-	cfs_hash_bd_t bd;
+	struct cfs_hash_bd bd;
 	char name[16];
 	int bits;
 	int i;
 
-	memset(s, 0, sizeof *s);
+	memset(s, 0, sizeof(*s));
 	bits = lu_htable_order();
 	snprintf(name, 16, "lu_site_%s", top->ld_type->ldt_name);
 	for (bits = min(max(LU_SITE_BITS_MIN, bits), LU_SITE_BITS_MAX);
@@ -1110,7 +1110,7 @@
 {
 	if (t->ldt_device_nr++ == 0 && t->ldt_ops->ldto_start != NULL)
 		t->ldt_ops->ldto_start(t);
-	memset(d, 0, sizeof *d);
+	memset(d, 0, sizeof(*d));
 	atomic_set(&d->ld_ref, 0);
 	d->ld_type = t;
 	lu_ref_init(&d->ld_reference);
@@ -1206,7 +1206,7 @@
  */
 int lu_object_header_init(struct lu_object_header *h)
 {
-	memset(h, 0, sizeof *h);
+	memset(h, 0, sizeof(*h));
 	atomic_set(&h->loh_ref, 1);
 	INIT_HLIST_NODE(&h->loh_hash);
 	INIT_LIST_HEAD(&h->loh_lru);
@@ -1525,7 +1525,7 @@
 	for (i = 0; i < ARRAY_SIZE(lu_keys); ++i)
 		key_fini(ctx, i);
 
-	OBD_FREE(ctx->lc_value, ARRAY_SIZE(lu_keys) * sizeof ctx->lc_value[0]);
+	OBD_FREE(ctx->lc_value, ARRAY_SIZE(lu_keys) * sizeof(ctx->lc_value[0]));
 	ctx->lc_value = NULL;
 }
 
@@ -1574,7 +1574,8 @@
 
 static int keys_init(struct lu_context *ctx)
 {
-	OBD_ALLOC(ctx->lc_value, ARRAY_SIZE(lu_keys) * sizeof ctx->lc_value[0]);
+	OBD_ALLOC(ctx->lc_value,
+		  ARRAY_SIZE(lu_keys) * sizeof(ctx->lc_value[0]));
 	if (likely(ctx->lc_value != NULL))
 		return keys_fill(ctx);
 
@@ -1588,7 +1589,7 @@
 {
 	int	rc;
 
-	memset(ctx, 0, sizeof *ctx);
+	memset(ctx, 0, sizeof(*ctx));
 	ctx->lc_state = LCS_INITIALIZED;
 	ctx->lc_tags = tags;
 	if (tags & LCT_REMEMBER) {
@@ -1787,10 +1788,10 @@
 	unsigned	lss_busy;
 } lu_site_stats_t;
 
-static void lu_site_stats_get(cfs_hash_t *hs,
+static void lu_site_stats_get(struct cfs_hash *hs,
 			      lu_site_stats_t *stats, int populated)
 {
-	cfs_hash_bd_t bd;
+	struct cfs_hash_bd bd;
 	int	   i;
 
 	cfs_hash_for_each_bucket(hs, &bd, i) {
@@ -2071,8 +2072,8 @@
 	struct lu_site_bkt_data	*bkt;
 	struct lu_object	*shadow;
 	wait_queue_t		 waiter;
-	cfs_hash_t		*hs;
-	cfs_hash_bd_t		 bd;
+	struct cfs_hash		*hs;
+	struct cfs_hash_bd	 bd;
 	__u64			 version = 0;
 
 	LASSERT(fid_is_zero(old));
diff --git a/drivers/staging/lustre/lustre/obdclass/obd_config.c b/drivers/staging/lustre/lustre/obdclass/obd_config.c
index d0a64ff..362ae54 100644
--- a/drivers/staging/lustre/lustre/obdclass/obd_config.c
+++ b/drivers/staging/lustre/lustre/obdclass/obd_config.c
@@ -417,7 +417,7 @@
 
 	/* do the attach */
 	if (OBP(obd, attach)) {
-		rc = OBP(obd,attach)(obd, sizeof *lcfg, lcfg);
+		rc = OBP(obd, attach)(obd, sizeof(*lcfg), lcfg);
 		if (rc)
 			GOTO(out, rc = -EINVAL);
 	}
@@ -900,7 +900,7 @@
 		OBD_FREE(lprof->lp_dt, strlen(lprof->lp_dt) + 1);
 		if (lprof->lp_md)
 			OBD_FREE(lprof->lp_md, strlen(lprof->lp_md) + 1);
-		OBD_FREE(lprof, sizeof *lprof);
+		OBD_FREE(lprof, sizeof(*lprof));
 	}
 }
 EXPORT_SYMBOL(class_del_profile);
@@ -916,7 +916,7 @@
 		OBD_FREE(lprof->lp_dt, strlen(lprof->lp_dt) + 1);
 		if (lprof->lp_md)
 			OBD_FREE(lprof->lp_md, strlen(lprof->lp_md) + 1);
-		OBD_FREE(lprof, sizeof *lprof);
+		OBD_FREE(lprof, sizeof(*lprof));
 	}
 }
 EXPORT_SYMBOL(class_del_profiles);
@@ -1692,7 +1692,7 @@
  */
 
 static unsigned
-uuid_hash(cfs_hash_t *hs, const void *key, unsigned mask)
+uuid_hash(struct cfs_hash *hs, const void *key, unsigned mask)
 {
 	return cfs_hash_djb2_hash(((struct obd_uuid *)key)->uuid,
 				  sizeof(((struct obd_uuid *)key)->uuid), mask);
@@ -1731,7 +1731,7 @@
 }
 
 static void
-uuid_export_get(cfs_hash_t *hs, struct hlist_node *hnode)
+uuid_export_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct obd_export *exp;
 
@@ -1740,7 +1740,7 @@
 }
 
 static void
-uuid_export_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+uuid_export_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct obd_export *exp;
 
@@ -1763,7 +1763,7 @@
  */
 
 static unsigned
-nid_hash(cfs_hash_t *hs, const void *key, unsigned mask)
+nid_hash(struct cfs_hash *hs, const void *key, unsigned mask)
 {
 	return cfs_hash_djb2_hash(key, sizeof(lnet_nid_t), mask);
 }
@@ -1801,7 +1801,7 @@
 }
 
 static void
-nid_export_get(cfs_hash_t *hs, struct hlist_node *hnode)
+nid_export_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct obd_export *exp;
 
@@ -1810,7 +1810,7 @@
 }
 
 static void
-nid_export_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+nid_export_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct obd_export *exp;
 
@@ -1855,7 +1855,7 @@
 }
 
 static void
-nidstats_get(cfs_hash_t *hs, struct hlist_node *hnode)
+nidstats_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct nid_stat *ns;
 
@@ -1864,7 +1864,7 @@
 }
 
 static void
-nidstats_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+nidstats_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct nid_stat *ns;
 
diff --git a/drivers/staging/lustre/lustre/obdclass/uuid.c b/drivers/staging/lustre/lustre/obdclass/uuid.c
index af5f27f..e87a199 100644
--- a/drivers/staging/lustre/lustre/obdclass/uuid.c
+++ b/drivers/staging/lustre/lustre/obdclass/uuid.c
@@ -48,7 +48,7 @@
 {
 	__u32 value;
 
-	LASSERT(nob <= sizeof value);
+	LASSERT(nob <= sizeof(value));
 
 	for (value = 0; nob > 0; --nob)
 		value = (value << 8) | *((*ptr)++);
@@ -61,7 +61,7 @@
 {
 	__u8 *ptr = in;
 
-	LASSERT(nr * sizeof *uu == sizeof(class_uuid_t));
+	LASSERT(nr * sizeof(*uu) == sizeof(class_uuid_t));
 
 	while (nr-- > 0)
 		CONSUME(uu[nr], &ptr);
diff --git a/drivers/staging/lustre/lustre/obdecho/echo_client.c b/drivers/staging/lustre/lustre/obdecho/echo_client.c
index c8b4344..1fb0ac4 100644
--- a/drivers/staging/lustre/lustre/obdecho/echo_client.c
+++ b/drivers/staging/lustre/lustre/obdecho/echo_client.c
@@ -1089,7 +1089,7 @@
 		} else {
 			struct lustre_md *md;
 			md = &info->eti_md;
-			memset(md, 0, sizeof *md);
+			memset(md, 0, sizeof(*md));
 			md->lsm = lsm;
 			conf->eoc_cl.u.coc_md = md;
 		}
diff --git a/drivers/staging/lustre/lustre/osc/lproc_osc.c b/drivers/staging/lustre/lustre/osc/lproc_osc.c
index 90d24d8..ef10e2a 100644
--- a/drivers/staging/lustre/lustre/osc/lproc_osc.c
+++ b/drivers/staging/lustre/lustre/osc/lproc_osc.c
@@ -571,7 +571,7 @@
 	client_obd_list_lock(&cli->cl_loi_list_lock);
 
 	seq_printf(seq, "snapshot_time:	 %lu.%lu (secs.usecs)\n",
-		   now.tv_sec, now.tv_usec);
+		   now.tv_sec, (unsigned long)now.tv_usec);
 	seq_printf(seq, "read RPCs in flight:  %d\n",
 		   cli->cl_r_in_flight);
 	seq_printf(seq, "write RPCs in flight: %d\n",
@@ -683,7 +683,7 @@
 	do_gettimeofday(&now);
 
 	seq_printf(seq, "snapshot_time:	 %lu.%lu (secs.usecs)\n",
-		   now.tv_sec, now.tv_usec);
+		   now.tv_sec, (unsigned long)now.tv_usec);
 	seq_printf(seq, "lockless_write_bytes\t\t"LPU64"\n",
 		   stats->os_lockless_writes);
 	seq_printf(seq, "lockless_read_bytes\t\t"LPU64"\n",
diff --git a/drivers/staging/lustre/lustre/osc/osc_io.c b/drivers/staging/lustre/lustre/osc/osc_io.c
index 3aeaf84..681d60a 100644
--- a/drivers/staging/lustre/lustre/osc/osc_io.c
+++ b/drivers/staging/lustre/lustre/osc/osc_io.c
@@ -105,7 +105,7 @@
 	struct osc_object *osc  = NULL; /* to keep gcc happy */
 	struct osc_page   *opg;
 	struct cl_io      *io;
-	LIST_HEAD     (list);
+	LIST_HEAD(list);
 
 	struct cl_page_list *qin      = &queue->c2_qin;
 	struct cl_page_list *qout     = &queue->c2_qout;
diff --git a/drivers/staging/lustre/lustre/osc/osc_lock.c b/drivers/staging/lustre/lustre/osc/osc_lock.c
index 5d7bdbf..c90abfb 100644
--- a/drivers/staging/lustre/lustre/osc/osc_lock.c
+++ b/drivers/staging/lustre/lustre/osc/osc_lock.c
@@ -862,7 +862,7 @@
 			cap = &req->rq_pill;
 			req_capsule_extend(cap, &RQF_LDLM_GL_CALLBACK);
 			req_capsule_set_size(cap, &RMF_DLM_LVB, RCL_SERVER,
-					     sizeof *lvb);
+					     sizeof(*lvb));
 			result = req_capsule_server_pack(cap);
 			if (result == 0) {
 				lvb = req_capsule_server_get(cap, &RMF_DLM_LVB);
diff --git a/drivers/staging/lustre/lustre/osc/osc_page.c b/drivers/staging/lustre/lustre/osc/osc_page.c
index d272322..6c20b8e 100644
--- a/drivers/staging/lustre/lustre/osc/osc_page.c
+++ b/drivers/staging/lustre/lustre/osc/osc_page.c
@@ -245,7 +245,7 @@
 void osc_index2policy(ldlm_policy_data_t *policy, const struct cl_object *obj,
 		      pgoff_t start, pgoff_t end)
 {
-	memset(policy, 0, sizeof *policy);
+	memset(policy, 0, sizeof(*policy));
 	policy->l_extent.start = cl_offset(obj, start);
 	policy->l_extent.end   = cl_offset(obj, end + 1) - 1;
 }
diff --git a/drivers/staging/lustre/lustre/osc/osc_quota.c b/drivers/staging/lustre/lustre/osc/osc_quota.c
index 9720c0e..6045a78 100644
--- a/drivers/staging/lustre/lustre/osc/osc_quota.c
+++ b/drivers/staging/lustre/lustre/osc/osc_quota.c
@@ -139,7 +139,7 @@
  * Hash operations for uid/gid <-> osc_quota_info
  */
 static unsigned
-oqi_hashfn(cfs_hash_t *hs, const void *key, unsigned mask)
+oqi_hashfn(struct cfs_hash *hs, const void *key, unsigned mask)
 {
 	return cfs_hash_u32_hash(*((__u32*)key), mask);
 }
@@ -172,17 +172,17 @@
 }
 
 static void
-oqi_get(cfs_hash_t *hs, struct hlist_node *hnode)
+oqi_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 }
 
 static void
-oqi_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+oqi_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 }
 
 static void
-oqi_exit(cfs_hash_t *hs, struct hlist_node *hnode)
+oqi_exit(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct osc_quota_info *oqi;
 
diff --git a/drivers/staging/lustre/lustre/osc/osc_request.c b/drivers/staging/lustre/lustre/osc/osc_request.c
index ee6707a..cb19778 100644
--- a/drivers/staging/lustre/lustre/osc/osc_request.c
+++ b/drivers/staging/lustre/lustre/osc/osc_request.c
@@ -2554,7 +2554,7 @@
 		}
 
 		req_capsule_set_size(&req->rq_pill, &RMF_DLM_LVB, RCL_SERVER,
-				     sizeof *lvb);
+				     sizeof(*lvb));
 		ptlrpc_request_set_replen(req);
 	}
 
diff --git a/drivers/staging/lustre/lustre/ptlrpc/client.c b/drivers/staging/lustre/lustre/ptlrpc/client.c
index 810a458..c2ab0c8 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/client.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/client.c
@@ -817,7 +817,7 @@
 {
 	struct ptlrpc_request_set *set;
 
-	OBD_ALLOC(set, sizeof *set);
+	OBD_ALLOC(set, sizeof(*set));
 	if (!set)
 		return NULL;
 	atomic_set(&set->set_refcount, 1);
@@ -2690,7 +2690,7 @@
 
 	LASSERT (sizeof (*aa) <= sizeof (req->rq_async_args));
 	aa = ptlrpc_req_async_args(req);
-	memset(aa, 0, sizeof *aa);
+	memset(aa, 0, sizeof(*aa));
 
 	/* Prepare request to be resent with ptlrpcd */
 	aa->praa_old_state = req->rq_send_state;
diff --git a/drivers/staging/lustre/lustre/ptlrpc/connection.c b/drivers/staging/lustre/lustre/ptlrpc/connection.c
index 17ca842..6756356 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/connection.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/connection.c
@@ -41,7 +41,7 @@
 
 #include "ptlrpc_internal.h"
 
-static cfs_hash_t *conn_hash = NULL;
+static struct cfs_hash *conn_hash = NULL;
 static cfs_hash_ops_t conn_hash_ops;
 
 struct ptlrpc_connection *
@@ -161,7 +161,7 @@
  * Hash operations for net_peer<->connection
  */
 static unsigned
-conn_hashfn(cfs_hash_t *hs, const void *key, unsigned mask)
+conn_hashfn(struct cfs_hash *hs, const void *key, unsigned mask)
 {
 	return cfs_hash_djb2_hash(key, sizeof(lnet_process_id_t), mask);
 }
@@ -195,7 +195,7 @@
 }
 
 static void
-conn_get(cfs_hash_t *hs, struct hlist_node *hnode)
+conn_get(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ptlrpc_connection *conn;
 
@@ -204,7 +204,7 @@
 }
 
 static void
-conn_put_locked(cfs_hash_t *hs, struct hlist_node *hnode)
+conn_put_locked(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ptlrpc_connection *conn;
 
@@ -213,7 +213,7 @@
 }
 
 static void
-conn_exit(cfs_hash_t *hs, struct hlist_node *hnode)
+conn_exit(struct cfs_hash *hs, struct hlist_node *hnode)
 {
 	struct ptlrpc_connection *conn;
 
diff --git a/drivers/staging/lustre/lustre/ptlrpc/import.c b/drivers/staging/lustre/lustre/ptlrpc/import.c
index 5ca69ae..7b96a0e 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/import.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/import.c
@@ -682,7 +682,7 @@
 
 	CLASSERT(sizeof (*aa) <= sizeof (request->rq_async_args));
 	aa = ptlrpc_req_async_args(request);
-	memset(aa, 0, sizeof *aa);
+	memset(aa, 0, sizeof(*aa));
 
 	aa->pcaa_peer_committed = committed_before_reconnect;
 	aa->pcaa_initial_connect = initial_connect;
diff --git a/drivers/staging/lustre/lustre/ptlrpc/layout.c b/drivers/staging/lustre/lustre/ptlrpc/layout.c
index 2f55ce2..d0a6e56 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/layout.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/layout.c
@@ -1669,7 +1669,7 @@
 	if (req != NULL && pill == &req->rq_pill && req->rq_pill_init)
 		return;
 
-	memset(pill, 0, sizeof *pill);
+	memset(pill, 0, sizeof(*pill));
 	pill->rc_req = req;
 	pill->rc_loc = location;
 	req_capsule_init_area(pill);
diff --git a/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c b/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c
index 6547f46..316103a 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c
@@ -207,7 +207,7 @@
 			p_idx++;
 			g_idx = 0;
 		}
-	};
+	}
 
 	/* free unused pools */
 	while (p_idx_max1 < p_idx_max2) {
diff --git a/drivers/staging/lustre/lustre/ptlrpc/service.c b/drivers/staging/lustre/lustre/ptlrpc/service.c
index acf75f3..21de868 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/service.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/service.c
@@ -263,7 +263,7 @@
  */
 static void rs_batch_init(struct rs_batch *b)
 {
-	memset(b, 0, sizeof *b);
+	memset(b, 0, sizeof(*b));
 	INIT_LIST_HEAD(&b->rsb_replies);
 }
 
@@ -1306,12 +1306,12 @@
 	}
 	newdl = cfs_time_current_sec() + at_get(&svcpt->scp_at_estimate);
 
-	OBD_ALLOC(reqcopy, sizeof *reqcopy);
+	OBD_ALLOC(reqcopy, sizeof(*reqcopy));
 	if (reqcopy == NULL)
 		return -ENOMEM;
 	OBD_ALLOC_LARGE(reqmsg, req->rq_reqlen);
 	if (!reqmsg) {
-		OBD_FREE(reqcopy, sizeof *reqcopy);
+		OBD_FREE(reqcopy, sizeof(*reqcopy));
 		return -ENOMEM;
 	}
 
@@ -1370,7 +1370,7 @@
 out:
 	sptlrpc_svc_ctx_decref(reqcopy);
 	OBD_FREE_LARGE(reqmsg, req->rq_reqlen);
-	OBD_FREE(reqcopy, sizeof *reqcopy);
+	OBD_FREE(reqcopy, sizeof(*reqcopy));
 	return rc;
 }
 
diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
index 46ed832..58684da 100644
--- a/drivers/staging/media/go7007/go7007-usb.c
+++ b/drivers/staging/media/go7007/go7007-usb.c
@@ -34,10 +34,9 @@
 
 static unsigned int assume_endura;
 module_param(assume_endura, int, 0644);
-MODULE_PARM_DESC(assume_endura, "when probing fails, "
-				"hardware is a Pelco Endura");
+MODULE_PARM_DESC(assume_endura,
+			"when probing fails, hardware is a Pelco Endura");
 
-/* #define GO7007_USB_DEBUG */
 /* #define GO7007_I2C_DEBUG */ /* for debugging the EZ-USB I2C adapter */
 
 #define	HPI_STATUS_ADDR	0xFFF4
@@ -662,9 +661,7 @@
 
 	if (usb->board->flags & GO7007_USB_EZUSB) {
 		/* Reset buffer in EZ-USB */
-#ifdef GO7007_USB_DEBUG
-		printk(KERN_DEBUG "go7007-usb: resetting EZ-USB buffers\n");
-#endif
+		dev_dbg(go->dev, "resetting EZ-USB buffers\n");
 		if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 ||
 		    go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0)
 			return -1;
@@ -678,8 +675,7 @@
 	/* Wait for an interrupt to indicate successful hardware reset */
 	if (go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
 			(intr_val & ~0x1) != 0x55aa) {
-		printk(KERN_ERR
-			"go7007-usb: unable to reset the USB interface\n");
+		dev_err(go->dev, "unable to reset the USB interface\n");
 		return -1;
 	}
 	return 0;
@@ -693,10 +689,7 @@
 	u16 status_reg = 0;
 	int timeout = 500;
 
-#ifdef GO7007_USB_DEBUG
-	printk(KERN_DEBUG
-		"go7007-usb: WriteInterrupt: %04x %04x\n", addr, data);
-#endif
+	dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
 
 	for (i = 0; i < 100; ++i) {
 		r = usb_control_msg(usb->usbdev,
@@ -714,9 +707,7 @@
 	if (r < 0)
 		goto write_int_error;
 	if (i == 100) {
-		printk(KERN_ERR
-			"go7007-usb: device is hung, status reg = 0x%04x\n",
-			status_reg);
+		dev_err(go->dev, "device is hung, status reg = 0x%04x\n", status_reg);
 		return -1;
 	}
 	r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 0), 0x12,
@@ -732,7 +723,7 @@
 	return 0;
 
 write_int_error:
-	printk(KERN_ERR "go7007-usb: error in WriteInterrupt: %d\n", r);
+	dev_err(go->dev, "error in WriteInterrupt: %d\n", r);
 	return r;
 }
 
@@ -743,10 +734,7 @@
 	int r;
 	int timeout = 500;
 
-#ifdef GO7007_USB_DEBUG
-	printk(KERN_DEBUG
-		"go7007-usb: WriteInterrupt: %04x %04x\n", addr, data);
-#endif
+	dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
 
 	go->usb_buf[0] = data & 0xff;
 	go->usb_buf[1] = data >> 8;
@@ -757,7 +745,7 @@
 			USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0x55aa,
 			0xf0f0, go->usb_buf, 8, timeout);
 	if (r < 0) {
-		printk(KERN_ERR "go7007-usb: error in WriteInterrupt: %d\n", r);
+		dev_err(go->dev, "error in WriteInterrupt: %d\n", r);
 		return r;
 	}
 	return 0;
@@ -772,23 +760,19 @@
 	if (status) {
 		if (status != -ESHUTDOWN &&
 				go->status != STATUS_SHUTDOWN) {
-			printk(KERN_ERR
-				"go7007-usb: error in read interrupt: %d\n",
-				urb->status);
+			dev_err(go->dev, "error in read interrupt: %d\n", urb->status);
 		} else {
 			wake_up(&go->interrupt_waitq);
 			return;
 		}
 	} else if (urb->actual_length != urb->transfer_buffer_length) {
-		printk(KERN_ERR "go7007-usb: short read in interrupt pipe!\n");
+		dev_err(go->dev, "short read in interrupt pipe!\n");
 	} else {
 		go->interrupt_available = 1;
 		go->interrupt_data = __le16_to_cpu(regs[0]);
 		go->interrupt_value = __le16_to_cpu(regs[1]);
-#ifdef GO7007_USB_DEBUG
-		printk(KERN_DEBUG "go7007-usb: ReadInterrupt: %04x %04x\n",
+		dev_dbg(go->dev, "ReadInterrupt: %04x %04x\n",
 				go->interrupt_value, go->interrupt_data);
-#endif
 	}
 
 	wake_up(&go->interrupt_waitq);
@@ -801,8 +785,7 @@
 
 	r = usb_submit_urb(usb->intr_urb, GFP_KERNEL);
 	if (r < 0) {
-		printk(KERN_ERR
-			"go7007-usb: unable to submit interrupt urb: %d\n", r);
+		dev_err(go->dev, "unable to submit interrupt urb: %d\n", r);
 		return r;
 	}
 	return 0;
@@ -818,18 +801,17 @@
 		return;
 	}
 	if (status) {
-		printk(KERN_ERR "go7007-usb: error in video pipe: %d\n",
-			status);
+		dev_err(go->dev, "error in video pipe: %d\n", status);
 		return;
 	}
 	if (urb->actual_length != urb->transfer_buffer_length) {
-		printk(KERN_ERR "go7007-usb: short read in video pipe!\n");
+		dev_err(go->dev, "short read in video pipe!\n");
 		return;
 	}
 	go7007_parse_video_stream(go, urb->transfer_buffer, urb->actual_length);
 	r = usb_submit_urb(urb, GFP_ATOMIC);
 	if (r < 0)
-		printk(KERN_ERR "go7007-usb: error in video pipe: %d\n", r);
+		dev_err(go->dev, "error in video pipe: %d\n", r);
 }
 
 static void go7007_usb_read_audio_pipe_complete(struct urb *urb)
@@ -840,19 +822,19 @@
 	if (!vb2_is_streaming(&go->vidq))
 		return;
 	if (status) {
-		printk(KERN_ERR "go7007-usb: error in audio pipe: %d\n",
+		dev_err(go->dev, "error in audio pipe: %d\n",
 			status);
 		return;
 	}
 	if (urb->actual_length != urb->transfer_buffer_length) {
-		printk(KERN_ERR "go7007-usb: short read in audio pipe!\n");
+		dev_err(go->dev, "short read in audio pipe!\n");
 		return;
 	}
 	if (go->audio_deliver != NULL)
 		go->audio_deliver(go, urb->transfer_buffer, urb->actual_length);
 	r = usb_submit_urb(urb, GFP_ATOMIC);
 	if (r < 0)
-		printk(KERN_ERR "go7007-usb: error in audio pipe: %d\n", r);
+		dev_err(go->dev, "error in audio pipe: %d\n", r);
 }
 
 static int go7007_usb_stream_start(struct go7007 *go)
@@ -863,8 +845,7 @@
 	for (i = 0; i < 8; ++i) {
 		r = usb_submit_urb(usb->video_urbs[i], GFP_KERNEL);
 		if (r < 0) {
-			printk(KERN_ERR "go7007-usb: error submitting video "
-					"urb %d: %d\n", i, r);
+			dev_err(go->dev, "error submitting video urb %d: %d\n", i, r);
 			goto video_submit_failed;
 		}
 	}
@@ -874,8 +855,7 @@
 	for (i = 0; i < 8; ++i) {
 		r = usb_submit_urb(usb->audio_urbs[i], GFP_KERNEL);
 		if (r < 0) {
-			printk(KERN_ERR "go7007-usb: error submitting audio "
-					"urb %d: %d\n", i, r);
+			dev_err(go->dev, "error submitting audio urb %d: %d\n", i, r);
 			goto audio_submit_failed;
 		}
 	}
@@ -911,9 +891,7 @@
 	int transferred, pipe;
 	int timeout = 500;
 
-#ifdef GO7007_USB_DEBUG
-	printk(KERN_DEBUG "go7007-usb: DownloadBuffer sending %d bytes\n", len);
-#endif
+	dev_dbg(go->dev, "DownloadBuffer sending %d bytes\n", len);
 
 	if (usb->board->flags & GO7007_USB_EZUSB)
 		pipe = usb_sndbulkpipe(usb->usbdev, 2);
@@ -999,9 +977,8 @@
 				!(msgs[i].flags & I2C_M_RD) &&
 				(msgs[i + 1].flags & I2C_M_RD)) {
 #ifdef GO7007_I2C_DEBUG
-			printk(KERN_DEBUG "go7007-usb: i2c write/read %d/%d "
-					"bytes on %02x\n", msgs[i].len,
-					msgs[i + 1].len, msgs[i].addr);
+			dev_dbg(go->dev, "i2c write/read %d/%d bytes on %02x\n",
+				msgs[i].len, msgs[i + 1].len, msgs[i].addr);
 #endif
 			buf[0] = 0x01;
 			buf[1] = msgs[i].len + 1;
@@ -1011,9 +988,8 @@
 			buf[buf_len++] = msgs[++i].len;
 		} else if (msgs[i].flags & I2C_M_RD) {
 #ifdef GO7007_I2C_DEBUG
-			printk(KERN_DEBUG "go7007-usb: i2c read %d "
-					"bytes on %02x\n", msgs[i].len,
-					msgs[i].addr);
+			dev_dbg(go->dev, "i2c read %d bytes on %02x\n",
+					msgs[i].len, msgs[i].addr);
 #endif
 			buf[0] = 0x01;
 			buf[1] = 1;
@@ -1022,9 +998,8 @@
 			buf_len = 4;
 		} else {
 #ifdef GO7007_I2C_DEBUG
-			printk(KERN_DEBUG "go7007-usb: i2c write %d "
-					"bytes on %02x\n", msgs[i].len,
-					msgs[i].addr);
+			dev_dbg(go->dev, "i2c write %d bytes on %02x\n",
+					msgs[i].len, msgs[i].addr);
 #endif
 			buf[0] = 0x00;
 			buf[1] = msgs[i].len + 1;
@@ -1082,7 +1057,7 @@
 	char *name;
 	int video_pipe, i, v_urb_len;
 
-	printk(KERN_DEBUG "go7007-usb: probing new GO7007 USB board\n");
+	dev_dbg(go->dev, "probing new GO7007 USB board\n");
 
 	switch (id->driver_info) {
 	case GO7007_BOARDID_MATRIX_II:
@@ -1122,14 +1097,13 @@
 		board = &board_px_tv402u;
 		break;
 	case GO7007_BOARDID_LIFEVIEW_LR192:
-		printk(KERN_ERR "go7007-usb: The Lifeview TV Walker Ultra "
-				"is not supported.  Sorry!\n");
+		dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
 		return -ENODEV;
 		name = "Lifeview TV Walker Ultra";
 		board = &board_lifeview_lr192;
 		break;
 	case GO7007_BOARDID_SENSORAY_2250:
-		printk(KERN_INFO "Sensoray 2250 found\n");
+		dev_info(go->dev, "Sensoray 2250 found\n");
 		name = "Sensoray 2250/2251";
 		board = &board_sensoray_2250;
 		break;
@@ -1138,7 +1112,7 @@
 		board = &board_ads_usbav_709;
 		break;
 	default:
-		printk(KERN_ERR "go7007-usb: unknown board ID %d!\n",
+		dev_err(go->dev, "unknown board ID %d!\n",
 				(unsigned int)id->driver_info);
 		return -ENODEV;
 	}
@@ -1197,8 +1171,7 @@
 		go->i2c_adapter.dev.parent = go->dev;
 		i2c_set_adapdata(&go->i2c_adapter, go);
 		if (i2c_add_adapter(&go->i2c_adapter) < 0) {
-			printk(KERN_ERR
-				"go7007-usb: error: i2c_add_adapter failed\n");
+			dev_err(go->dev, "error: i2c_add_adapter failed\n");
 			goto allocfail;
 		}
 		go->i2c_adapter_online = 1;
@@ -1248,8 +1221,9 @@
 	/* Probe the tuner model on the TV402U */
 	if (go->board_id == GO7007_BOARDID_PX_TV402U) {
 		/* Board strapping indicates tuner model */
-		if (go7007_usb_vendor_request(go, 0x41, 0, 0, go->usb_buf, 3, 1) < 0) {
-			printk(KERN_ERR "go7007-usb: GPIO read failed!\n");
+		if (go7007_usb_vendor_request(go, 0x41, 0, 0, go->usb_buf, 3,
+					1) < 0) {
+			dev_err(go->dev, "GPIO read failed!\n");
 			goto allocfail;
 		}
 		switch (go->usb_buf[0] >> 6) {
@@ -1273,15 +1247,14 @@
 					sizeof(go->name));
 			break;
 		default:
-			printk(KERN_DEBUG "go7007-usb: unable to detect "
-						"tuner type!\n");
+			dev_dbg(go->dev, "unable to detect tuner type!\n");
 			break;
 		}
 		/* Configure tuner mode selection inputs connected
 		 * to the EZ-USB GPIO output pins */
 		if (go7007_usb_vendor_request(go, 0x40, 0x7f02, 0,
 					NULL, 0, 0) < 0) {
-			printk(KERN_ERR "go7007-usb: GPIO write failed!\n");
+			dev_err(go->dev, "GPIO write failed!\n");
 			goto allocfail;
 		}
 	}
@@ -1290,11 +1263,7 @@
 	 * a USB1.1 port.  There will be silent corruption of the stream. */
 	if ((board->flags & GO7007_USB_EZUSB) &&
 			usbdev->speed != USB_SPEED_HIGH)
-		printk(KERN_ERR "go7007-usb: *** WARNING ***  This device "
-				"must be connected to a USB 2.0 port!  "
-				"Attempting to capture video through a USB 1.1 "
-				"port will result in stream corruption, even "
-				"at low bitrates!\n");
+		dev_err(go->dev, "*** WARNING ***  This device must be connected to a USB 2.0 port! Attempting to capture video through a USB 1.1 port will result in stream corruption, even at low bitrates!\n");
 
 	/* Allocate the URBs and buffers for receiving the video stream */
 	if (board->flags & GO7007_USB_EZUSB) {
diff --git a/drivers/staging/media/lirc/lirc_bt829.c b/drivers/staging/media/lirc/lirc_bt829.c
index fa31ee7..fbbdce4 100644
--- a/drivers/staging/media/lirc/lirc_bt829.c
+++ b/drivers/staging/media/lirc/lirc_bt829.c
@@ -132,7 +132,7 @@
 	atir_driver.minor       = -1;
 	atir_driver.code_length = 8;
 	atir_driver.sample_rate = 10;
-	atir_driver.data        = 0;
+	atir_driver.data        = NULL;
 	atir_driver.add_to_buf  = atir_add_to_buf;
 	atir_driver.set_use_inc = atir_set_use_inc;
 	atir_driver.set_use_dec = atir_set_use_dec;
@@ -159,7 +159,7 @@
 static int atir_init_start(void)
 {
 	pci_addr_lin = ioremap(pci_addr_phys + DATA_PCI_OFF, 0x400);
-	if (pci_addr_lin == 0) {
+	if (!pci_addr_lin) {
 		pr_info("pci mem must be mapped\n");
 		return 0;
 	}
diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c
index 4afa7da..ab2ae11 100644
--- a/drivers/staging/media/lirc/lirc_imon.c
+++ b/drivers/staging/media/lirc/lirc_imon.c
@@ -625,7 +625,7 @@
 	}
 
 	if (debug) {
-		printk(KERN_INFO "raw packet: ");
+		dev_info(dev, "raw packet: ");
 		for (i = 0; i < len; ++i)
 			printk("%02x ", buf[i]);
 		printk("\n");
diff --git a/drivers/staging/mt29f_spinand/Kconfig b/drivers/staging/mt29f_spinand/Kconfig
new file mode 100644
index 0000000..4031748
--- /dev/null
+++ b/drivers/staging/mt29f_spinand/Kconfig
@@ -0,0 +1,16 @@
+config MTD_SPINAND_MT29F
+	tristate "SPINAND Device Support for Micron"
+	depends on MTD_NAND && SPI
+	help
+	  This enables support for accessing Micron SPI NAND flash
+	  devices.
+	  If you have Micron SPI NAND chip say yes.
+
+	  If unsure, say no here.
+
+config MTD_SPINAND_ONDIEECC
+	bool "Use SPINAND internal ECC"
+	depends on MTD_SPINAND_MT29F
+	help
+	  Internel ECC.
+	  Enables Hardware ECC support for Micron SPI NAND.
diff --git a/drivers/staging/mt29f_spinand/Makefile b/drivers/staging/mt29f_spinand/Makefile
new file mode 100644
index 0000000..e47af0f
--- /dev/null
+++ b/drivers/staging/mt29f_spinand/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTD_SPINAND_MT29F) += mt29f_spinand.o
diff --git a/drivers/staging/mt29f_spinand/TODO b/drivers/staging/mt29f_spinand/TODO
new file mode 100644
index 0000000..a2209b72
--- /dev/null
+++ b/drivers/staging/mt29f_spinand/TODO
@@ -0,0 +1,13 @@
+TODO:
+	- Tested on XLP platform, needs to be tested on other platforms.
+	- Checkpatch.pl cleanups
+	- Sparce fixes.
+	- Clean up coding style to meet kernel standard.
+
+Please send patches
+To:
+Kamlakant Patel <kamlakant.patel@broadcom.com>
+Cc:
+Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Mona Anonuevo <manonuevo@micron.com>
+linux-mtd@lists.infradead.org
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c
new file mode 100644
index 0000000..51dbc13
--- /dev/null
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c
@@ -0,0 +1,947 @@
+/*
+ * Copyright (c) 2003-2013 Broadcom Corporation
+ *
+ * Copyright (c) 2009-2010 Micron Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/spi/spi.h>
+
+#include "mt29f_spinand.h"
+
+#define BUFSIZE (10 * 64 * 2048)
+#define CACHE_BUF 2112
+/*
+ * OOB area specification layout:  Total 32 available free bytes.
+ */
+
+static inline struct spinand_state *mtd_to_state(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+	struct spinand_info *info = (struct spinand_info *)chip->priv;
+	struct spinand_state *state = (struct spinand_state *)info->priv;
+
+	return state;
+}
+
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+static int enable_hw_ecc;
+static int enable_read_hw_ecc;
+
+static struct nand_ecclayout spinand_oob_64 = {
+	.eccbytes = 24,
+	.eccpos = {
+		1, 2, 3, 4, 5, 6,
+		17, 18, 19, 20, 21, 22,
+		33, 34, 35, 36, 37, 38,
+		49, 50, 51, 52, 53, 54, },
+	.oobavail = 32,
+	.oobfree = {
+		{.offset = 8,
+			.length = 8},
+		{.offset = 24,
+			.length = 8},
+		{.offset = 40,
+			.length = 8},
+		{.offset = 56,
+			.length = 8},
+	}
+};
+#endif
+
+/*
+ * spinand_cmd - to process a command to send to the SPI Nand
+ * Description:
+ *    Set up the command buffer to send to the SPI controller.
+ *    The command buffer has to initialized to 0.
+ */
+
+static int spinand_cmd(struct spi_device *spi, struct spinand_cmd *cmd)
+{
+	struct spi_message message;
+	struct spi_transfer x[4];
+	u8 dummy = 0xff;
+
+	spi_message_init(&message);
+	memset(x, 0, sizeof(x));
+
+	x[0].len = 1;
+	x[0].tx_buf = &cmd->cmd;
+	spi_message_add_tail(&x[0], &message);
+
+	if (cmd->n_addr) {
+		x[1].len = cmd->n_addr;
+		x[1].tx_buf = cmd->addr;
+		spi_message_add_tail(&x[1], &message);
+	}
+
+	if (cmd->n_dummy) {
+		x[2].len = cmd->n_dummy;
+		x[2].tx_buf = &dummy;
+		spi_message_add_tail(&x[2], &message);
+	}
+
+	if (cmd->n_tx) {
+		x[3].len = cmd->n_tx;
+		x[3].tx_buf = cmd->tx_buf;
+		spi_message_add_tail(&x[3], &message);
+	}
+
+	if (cmd->n_rx) {
+		x[3].len = cmd->n_rx;
+		x[3].rx_buf = cmd->rx_buf;
+		spi_message_add_tail(&x[3], &message);
+	}
+
+	return spi_sync(spi, &message);
+}
+
+/*
+ * spinand_read_id- Read SPI Nand ID
+ * Description:
+ *    Read ID: read two ID bytes from the SPI Nand device
+ */
+static int spinand_read_id(struct spi_device *spi_nand, u8 *id)
+{
+	int retval;
+	u8 nand_id[3];
+	struct spinand_cmd cmd = {0};
+
+	cmd.cmd = CMD_READ_ID;
+	cmd.n_rx = 3;
+	cmd.rx_buf = &nand_id[0];
+
+	retval = spinand_cmd(spi_nand, &cmd);
+	if (retval < 0) {
+		dev_err(&spi_nand->dev, "error %d reading id\n", retval);
+		return retval;
+	}
+	id[0] = nand_id[1];
+	id[1] = nand_id[2];
+	return retval;
+}
+
+/*
+ * spinand_read_status- send command 0xf to the SPI Nand status register
+ * Description:
+ *    After read, write, or erase, the Nand device is expected to set the
+ *    busy status.
+ *    This function is to allow reading the status of the command: read,
+ *    write, and erase.
+ *    Once the status turns to be ready, the other status bits also are
+ *    valid status bits.
+ */
+static int spinand_read_status(struct spi_device *spi_nand, uint8_t *status)
+{
+	struct spinand_cmd cmd = {0};
+	int ret;
+
+	cmd.cmd = CMD_READ_REG;
+	cmd.n_addr = 1;
+	cmd.addr[0] = REG_STATUS;
+	cmd.n_rx = 1;
+	cmd.rx_buf = status;
+
+	ret = spinand_cmd(spi_nand, &cmd);
+	if (ret < 0)
+		dev_err(&spi_nand->dev, "err: %d read status register\n", ret);
+
+	return ret;
+}
+
+#define MAX_WAIT_JIFFIES  (40 * HZ)
+static int wait_till_ready(struct spi_device *spi_nand)
+{
+	unsigned long deadline;
+	int retval;
+	u8 stat = 0;
+
+	deadline = jiffies + MAX_WAIT_JIFFIES;
+	do {
+		retval = spinand_read_status(spi_nand, &stat);
+		if (retval < 0)
+			return -1;
+		else if (!(stat & 0x1))
+			break;
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, deadline));
+
+	if ((stat & 0x1) == 0)
+		return 0;
+
+	return -1;
+}
+/**
+ * spinand_get_otp- send command 0xf to read the SPI Nand OTP register
+ * Description:
+ *   There is one bit( bit 0x10 ) to set or to clear the internal ECC.
+ *   Enable chip internal ECC, set the bit to 1
+ *   Disable chip internal ECC, clear the bit to 0
+ */
+static int spinand_get_otp(struct spi_device *spi_nand, u8 *otp)
+{
+	struct spinand_cmd cmd = {0};
+	int retval;
+
+	cmd.cmd = CMD_READ_REG;
+	cmd.n_addr = 1;
+	cmd.addr[0] = REG_OTP;
+	cmd.n_rx = 1;
+	cmd.rx_buf = otp;
+
+	retval = spinand_cmd(spi_nand, &cmd);
+	if (retval < 0)
+		dev_err(&spi_nand->dev, "error %d get otp\n", retval);
+	return retval;
+}
+
+/**
+ * spinand_set_otp- send command 0x1f to write the SPI Nand OTP register
+ * Description:
+ *   There is one bit( bit 0x10 ) to set or to clear the internal ECC.
+ *   Enable chip internal ECC, set the bit to 1
+ *   Disable chip internal ECC, clear the bit to 0
+ */
+static int spinand_set_otp(struct spi_device *spi_nand, u8 *otp)
+{
+	int retval;
+	struct spinand_cmd cmd = {0};
+
+	cmd.cmd = CMD_WRITE_REG,
+	cmd.n_addr = 1,
+	cmd.addr[0] = REG_OTP,
+	cmd.n_tx = 1,
+	cmd.tx_buf = otp,
+
+	retval = spinand_cmd(spi_nand, &cmd);
+	if (retval < 0)
+		dev_err(&spi_nand->dev, "error %d set otp\n", retval);
+
+	return retval;
+}
+
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+/**
+ * spinand_enable_ecc- send command 0x1f to write the SPI Nand OTP register
+ * Description:
+ *   There is one bit( bit 0x10 ) to set or to clear the internal ECC.
+ *   Enable chip internal ECC, set the bit to 1
+ *   Disable chip internal ECC, clear the bit to 0
+ */
+static int spinand_enable_ecc(struct spi_device *spi_nand)
+{
+	int retval;
+	u8 otp = 0;
+
+	retval = spinand_get_otp(spi_nand, &otp);
+	if (retval < 0)
+		return retval;
+
+	if ((otp & OTP_ECC_MASK) == OTP_ECC_MASK) {
+		return 0;
+	} else {
+		otp |= OTP_ECC_MASK;
+		retval = spinand_set_otp(spi_nand, &otp);
+		if (retval < 0)
+			return retval;
+		return spinand_get_otp(spi_nand, &otp);
+	}
+}
+#endif
+
+static int spinand_disable_ecc(struct spi_device *spi_nand)
+{
+	int retval;
+	u8 otp = 0;
+
+	retval = spinand_get_otp(spi_nand, &otp);
+	if (retval < 0)
+		return retval;
+
+	if ((otp & OTP_ECC_MASK) == OTP_ECC_MASK) {
+		otp &= ~OTP_ECC_MASK;
+		retval = spinand_set_otp(spi_nand, &otp);
+		if (retval < 0)
+			return retval;
+		return spinand_get_otp(spi_nand, &otp);
+	} else
+		return 0;
+}
+
+/**
+ * spinand_write_enable- send command 0x06 to enable write or erase the
+ * Nand cells
+ * Description:
+ *   Before write and erase the Nand cells, the write enable has to be set.
+ *   After the write or erase, the write enable bit is automatically
+ *   cleared (status register bit 2)
+ *   Set the bit 2 of the status register has the same effect
+ */
+static int spinand_write_enable(struct spi_device *spi_nand)
+{
+	struct spinand_cmd cmd = {0};
+
+	cmd.cmd = CMD_WR_ENABLE;
+	return spinand_cmd(spi_nand, &cmd);
+}
+
+static int spinand_read_page_to_cache(struct spi_device *spi_nand, u16 page_id)
+{
+	struct spinand_cmd cmd = {0};
+	u16 row;
+
+	row = page_id;
+	cmd.cmd = CMD_READ;
+	cmd.n_addr = 3;
+	cmd.addr[1] = (u8)((row & 0xff00) >> 8);
+	cmd.addr[2] = (u8)(row & 0x00ff);
+
+	return spinand_cmd(spi_nand, &cmd);
+}
+
+/*
+ * spinand_read_from_cache- send command 0x03 to read out the data from the
+ * cache register(2112 bytes max)
+ * Description:
+ *   The read can specify 1 to 2112 bytes of data read at the corresponding
+ *   locations.
+ *   No tRd delay.
+ */
+static int spinand_read_from_cache(struct spi_device *spi_nand, u16 page_id,
+		u16 byte_id, u16 len, u8 *rbuf)
+{
+	struct spinand_cmd cmd = {0};
+	u16 column;
+
+	column = byte_id;
+	cmd.cmd = CMD_READ_RDM;
+	cmd.n_addr = 3;
+	cmd.addr[0] = (u8)((column & 0xff00) >> 8);
+	cmd.addr[0] |= (u8)(((page_id >> 6) & 0x1) << 4);
+	cmd.addr[1] = (u8)(column & 0x00ff);
+	cmd.addr[2] = (u8)(0xff);
+	cmd.n_dummy = 0;
+	cmd.n_rx = len;
+	cmd.rx_buf = rbuf;
+
+	return spinand_cmd(spi_nand, &cmd);
+}
+
+/*
+ * spinand_read_page-to read a page with:
+ * @page_id: the physical page number
+ * @offset:  the location from 0 to 2111
+ * @len:     number of bytes to read
+ * @rbuf:    read buffer to hold @len bytes
+ *
+ * Description:
+ *   The read includes two commands to the Nand: 0x13 and 0x03 commands
+ *   Poll to read status to wait for tRD time.
+ */
+static int spinand_read_page(struct spi_device *spi_nand, u16 page_id,
+		u16 offset, u16 len, u8 *rbuf)
+{
+	int ret;
+	u8 status = 0;
+
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+	if (enable_read_hw_ecc) {
+		if (spinand_enable_ecc(spi_nand) < 0)
+			dev_err(&spi_nand->dev, "enable HW ECC failed!");
+	}
+#endif
+	ret = spinand_read_page_to_cache(spi_nand, page_id);
+	if (ret < 0)
+		return ret;
+
+	if (wait_till_ready(spi_nand))
+		dev_err(&spi_nand->dev, "WAIT timedout!!!\n");
+
+	while (1) {
+		ret = spinand_read_status(spi_nand, &status);
+		if (ret < 0) {
+			dev_err(&spi_nand->dev,
+					"err %d read status register\n", ret);
+			return ret;
+		}
+
+		if ((status & STATUS_OIP_MASK) == STATUS_READY) {
+			if ((status & STATUS_ECC_MASK) == STATUS_ECC_ERROR) {
+				dev_err(&spi_nand->dev, "ecc error, page=%d\n",
+						page_id);
+				return 0;
+			}
+			break;
+		}
+	}
+
+	ret = spinand_read_from_cache(spi_nand, page_id, offset, len, rbuf);
+	if (ret < 0) {
+		dev_err(&spi_nand->dev, "read from cache failed!!\n");
+		return ret;
+	}
+
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+	if (enable_read_hw_ecc) {
+		ret = spinand_disable_ecc(spi_nand);
+		if (ret < 0) {
+			dev_err(&spi_nand->dev, "disable ecc failed!!\n");
+			return ret;
+		}
+		enable_read_hw_ecc = 0;
+	}
+#endif
+	return ret;
+}
+
+/*
+ * spinand_program_data_to_cache--to write a page to cache with:
+ * @byte_id: the location to write to the cache
+ * @len:     number of bytes to write
+ * @rbuf:    read buffer to hold @len bytes
+ *
+ * Description:
+ *   The write command used here is 0x84--indicating that the cache is
+ *   not cleared first.
+ *   Since it is writing the data to cache, there is no tPROG time.
+ */
+static int spinand_program_data_to_cache(struct spi_device *spi_nand,
+		u16 page_id, u16 byte_id, u16 len, u8 *wbuf)
+{
+	struct spinand_cmd cmd = {0};
+	u16 column;
+
+	column = byte_id;
+	cmd.cmd = CMD_PROG_PAGE_CLRCACHE;
+	cmd.n_addr = 2;
+	cmd.addr[0] = (u8)((column & 0xff00) >> 8);
+	cmd.addr[0] |= (u8)(((page_id >> 6) & 0x1) << 4);
+	cmd.addr[1] = (u8)(column & 0x00ff);
+	cmd.n_tx = len;
+	cmd.tx_buf = wbuf;
+
+	return spinand_cmd(spi_nand, &cmd);
+}
+
+/**
+ * spinand_program_execute--to write a page from cache to the Nand array with
+ * @page_id: the physical page location to write the page.
+ *
+ * Description:
+ *   The write command used here is 0x10--indicating the cache is writing to
+ *   the Nand array.
+ *   Need to wait for tPROG time to finish the transaction.
+ */
+static int spinand_program_execute(struct spi_device *spi_nand, u16 page_id)
+{
+	struct spinand_cmd cmd = {0};
+	u16 row;
+
+	row = page_id;
+	cmd.cmd = CMD_PROG_PAGE_EXC;
+	cmd.n_addr = 3;
+	cmd.addr[1] = (u8)((row & 0xff00) >> 8);
+	cmd.addr[2] = (u8)(row & 0x00ff);
+
+	return spinand_cmd(spi_nand, &cmd);
+}
+
+/**
+ * spinand_program_page--to write a page with:
+ * @page_id: the physical page location to write the page.
+ * @offset:  the location from the cache starting from 0 to 2111
+ * @len:     the number of bytes to write
+ * @wbuf:    the buffer to hold the number of bytes
+ *
+ * Description:
+ *   The commands used here are 0x06, 0x84, and 0x10--indicating that
+ *   the write enable is first sent, the write cache command, and the
+ *   write execute command.
+ *   Poll to wait for the tPROG time to finish the transaction.
+ */
+static int spinand_program_page(struct spi_device *spi_nand,
+		u16 page_id, u16 offset, u16 len, u8 *buf)
+{
+	int retval;
+	u8 status = 0;
+	uint8_t *wbuf;
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+	unsigned int i, j;
+
+	enable_read_hw_ecc = 0;
+	wbuf = devm_kzalloc(&spi_nand->dev, CACHE_BUF, GFP_KERNEL);
+	spinand_read_page(spi_nand, page_id, 0, CACHE_BUF, wbuf);
+
+	for (i = offset, j = 0; i < len; i++, j++)
+		wbuf[i] &= buf[j];
+
+	if (enable_hw_ecc) {
+		retval = spinand_enable_ecc(spi_nand);
+		if (retval < 0) {
+			dev_err(&spi_nand->dev, "enable ecc failed!!\n");
+			return retval;
+		}
+	}
+#else
+	wbuf = buf;
+#endif
+	retval = spinand_write_enable(spi_nand);
+	if (retval < 0) {
+		dev_err(&spi_nand->dev, "write enable failed!!\n");
+		return retval;
+	}
+	if (wait_till_ready(spi_nand))
+		dev_err(&spi_nand->dev, "wait timedout!!!\n");
+
+	retval = spinand_program_data_to_cache(spi_nand, page_id,
+			offset, len, wbuf);
+	if (retval < 0)
+		return retval;
+	retval = spinand_program_execute(spi_nand, page_id);
+	if (retval < 0)
+		return retval;
+	while (1) {
+		retval = spinand_read_status(spi_nand, &status);
+		if (retval < 0) {
+			dev_err(&spi_nand->dev,
+					"error %d reading status register\n",
+					retval);
+			return retval;
+		}
+
+		if ((status & STATUS_OIP_MASK) == STATUS_READY) {
+			if ((status & STATUS_P_FAIL_MASK) == STATUS_P_FAIL) {
+				dev_err(&spi_nand->dev,
+					"program error, page %d\n", page_id);
+				return -1;
+			} else
+				break;
+		}
+	}
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+	if (enable_hw_ecc) {
+		retval = spinand_disable_ecc(spi_nand);
+		if (retval < 0) {
+			dev_err(&spi_nand->dev, "disable ecc failed!!\n");
+			return retval;
+		}
+		enable_hw_ecc = 0;
+	}
+#endif
+
+	return 0;
+}
+
+/**
+ * spinand_erase_block_erase--to erase a page with:
+ * @block_id: the physical block location to erase.
+ *
+ * Description:
+ *   The command used here is 0xd8--indicating an erase command to erase
+ *   one block--64 pages
+ *   Need to wait for tERS.
+ */
+static int spinand_erase_block_erase(struct spi_device *spi_nand, u16 block_id)
+{
+	struct spinand_cmd cmd = {0};
+	u16 row;
+
+	row = block_id;
+	cmd.cmd = CMD_ERASE_BLK;
+	cmd.n_addr = 3;
+	cmd.addr[1] = (u8)((row & 0xff00) >> 8);
+	cmd.addr[2] = (u8)(row & 0x00ff);
+
+	return spinand_cmd(spi_nand, &cmd);
+}
+
+/**
+ * spinand_erase_block--to erase a page with:
+ * @block_id: the physical block location to erase.
+ *
+ * Description:
+ *   The commands used here are 0x06 and 0xd8--indicating an erase
+ *   command to erase one block--64 pages
+ *   It will first to enable the write enable bit (0x06 command),
+ *   and then send the 0xd8 erase command
+ *   Poll to wait for the tERS time to complete the tranaction.
+ */
+static int spinand_erase_block(struct spi_device *spi_nand, u16 block_id)
+{
+	int retval;
+	u8 status = 0;
+
+	retval = spinand_write_enable(spi_nand);
+	if (wait_till_ready(spi_nand))
+		dev_err(&spi_nand->dev, "wait timedout!!!\n");
+
+	retval = spinand_erase_block_erase(spi_nand, block_id);
+	while (1) {
+		retval = spinand_read_status(spi_nand, &status);
+		if (retval < 0) {
+			dev_err(&spi_nand->dev,
+					"error %d reading status register\n",
+					(int) retval);
+			return retval;
+		}
+
+		if ((status & STATUS_OIP_MASK) == STATUS_READY) {
+			if ((status & STATUS_E_FAIL_MASK) == STATUS_E_FAIL) {
+				dev_err(&spi_nand->dev,
+					"erase error, block %d\n", block_id);
+				return -1;
+			} else
+				break;
+		}
+	}
+	return 0;
+}
+
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+static int spinand_write_page_hwecc(struct mtd_info *mtd,
+		struct nand_chip *chip, const uint8_t *buf, int oob_required)
+{
+	const uint8_t *p = buf;
+	int eccsize = chip->ecc.size;
+	int eccsteps = chip->ecc.steps;
+
+	enable_hw_ecc = 1;
+	chip->write_buf(mtd, p, eccsize * eccsteps);
+	return 0;
+}
+
+static int spinand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+		uint8_t *buf, int oob_required, int page)
+{
+	u8 retval, status;
+	uint8_t *p = buf;
+	int eccsize = chip->ecc.size;
+	int eccsteps = chip->ecc.steps;
+	struct spinand_info *info = (struct spinand_info *)chip->priv;
+
+	enable_read_hw_ecc = 1;
+
+	chip->read_buf(mtd, p, eccsize * eccsteps);
+	if (oob_required)
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	while (1) {
+		retval = spinand_read_status(info->spi, &status);
+		if ((status & STATUS_OIP_MASK) == STATUS_READY) {
+			if ((status & STATUS_ECC_MASK) == STATUS_ECC_ERROR) {
+				pr_info("spinand: ECC error\n");
+				mtd->ecc_stats.failed++;
+			} else if ((status & STATUS_ECC_MASK) ==
+					STATUS_ECC_1BIT_CORRECTED)
+				mtd->ecc_stats.corrected++;
+			break;
+		}
+	}
+	return 0;
+
+}
+#endif
+
+static void spinand_select_chip(struct mtd_info *mtd, int dev)
+{
+}
+
+static uint8_t spinand_read_byte(struct mtd_info *mtd)
+{
+	struct spinand_state *state = mtd_to_state(mtd);
+	u8 data;
+
+	data = state->buf[state->buf_ptr];
+	state->buf_ptr++;
+	return data;
+}
+
+
+static int spinand_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	struct spinand_info *info = (struct spinand_info *)chip->priv;
+
+	unsigned long timeo = jiffies;
+	int retval, state = chip->state;
+	u8 status;
+
+	if (state == FL_ERASING)
+		timeo += (HZ * 400) / 1000;
+	else
+		timeo += (HZ * 20) / 1000;
+
+	while (time_before(jiffies, timeo)) {
+		retval = spinand_read_status(info->spi, &status);
+		if ((status & STATUS_OIP_MASK) == STATUS_READY)
+			return 0;
+
+		cond_resched();
+	}
+	return 0;
+}
+
+static void spinand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+
+	struct spinand_state *state = mtd_to_state(mtd);
+	memcpy(state->buf + state->buf_ptr, buf, len);
+	state->buf_ptr += len;
+}
+
+static void spinand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct spinand_state *state = mtd_to_state(mtd);
+	memcpy(buf, state->buf + state->buf_ptr, len);
+	state->buf_ptr += len;
+}
+
+/*
+ * spinand_reset- send RESET command "0xff" to the Nand device.
+ */
+static void spinand_reset(struct spi_device *spi_nand)
+{
+	struct spinand_cmd cmd = {0};
+
+	cmd.cmd = CMD_RESET;
+
+	if (spinand_cmd(spi_nand, &cmd) < 0)
+		pr_info("spinand reset failed!\n");
+
+	/* elapse 1ms before issuing any other command */
+	udelay(1000);
+
+	if (wait_till_ready(spi_nand))
+		dev_err(&spi_nand->dev, "wait timedout!\n");
+}
+
+static void spinand_cmdfunc(struct mtd_info *mtd, unsigned int command,
+		int column, int page)
+{
+	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+	struct spinand_info *info = (struct spinand_info *)chip->priv;
+	struct spinand_state *state = (struct spinand_state *)info->priv;
+
+	switch (command) {
+	/*
+	 * READ0 - read in first  0x800 bytes
+	 */
+	case NAND_CMD_READ1:
+	case NAND_CMD_READ0:
+		state->buf_ptr = 0;
+		spinand_read_page(info->spi, page, 0x0, 0x840, state->buf);
+		break;
+	/* READOOB reads only the OOB because no ECC is performed. */
+	case NAND_CMD_READOOB:
+		state->buf_ptr = 0;
+		spinand_read_page(info->spi, page, 0x800, 0x40, state->buf);
+		break;
+	case NAND_CMD_RNDOUT:
+		state->buf_ptr = column;
+		break;
+	case NAND_CMD_READID:
+		state->buf_ptr = 0;
+		spinand_read_id(info->spi, (u8 *)state->buf);
+		break;
+	case NAND_CMD_PARAM:
+		state->buf_ptr = 0;
+		break;
+	/* ERASE1 stores the block and page address */
+	case NAND_CMD_ERASE1:
+		spinand_erase_block(info->spi, page);
+		break;
+	/* ERASE2 uses the block and page address from ERASE1 */
+	case NAND_CMD_ERASE2:
+		break;
+	/* SEQIN sets up the addr buffer and all registers except the length */
+	case NAND_CMD_SEQIN:
+		state->col = column;
+		state->row = page;
+		state->buf_ptr = 0;
+		break;
+	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+	case NAND_CMD_PAGEPROG:
+		spinand_program_page(info->spi, state->row, state->col,
+				state->buf_ptr, state->buf);
+		break;
+	case NAND_CMD_STATUS:
+		spinand_get_otp(info->spi, state->buf);
+		if (!(state->buf[0] & 0x80))
+			state->buf[0] = 0x80;
+		state->buf_ptr = 0;
+		break;
+	/* RESET command */
+	case NAND_CMD_RESET:
+		if (wait_till_ready(info->spi))
+			dev_err(&info->spi->dev, "WAIT timedout!!!\n");
+		/* a minimum of 250us must elapse before issuing RESET cmd*/
+		udelay(250);
+		spinand_reset(info->spi);
+		break;
+	default:
+		dev_err(&mtd->dev, "Unknown CMD: 0x%x\n", command);
+	}
+}
+
+/**
+ * spinand_lock_block- send write register 0x1f command to the Nand device
+ *
+ * Description:
+ *    After power up, all the Nand blocks are locked.  This function allows
+ *    one to unlock the blocks, and so it can be written or erased.
+ */
+static int spinand_lock_block(struct spi_device *spi_nand, u8 lock)
+{
+	struct spinand_cmd cmd = {0};
+	int ret;
+	u8 otp = 0;
+
+	ret = spinand_get_otp(spi_nand, &otp);
+
+	cmd.cmd = CMD_WRITE_REG;
+	cmd.n_addr = 1;
+	cmd.addr[0] = REG_BLOCK_LOCK;
+	cmd.n_tx = 1;
+	cmd.tx_buf = &lock;
+
+	ret = spinand_cmd(spi_nand, &cmd);
+	if (ret < 0)
+		dev_err(&spi_nand->dev, "error %d lock block\n", ret);
+
+	return ret;
+}
+/*
+ * spinand_probe - [spinand Interface]
+ * @spi_nand: registered device driver.
+ *
+ * Description:
+ *   To set up the device driver parameters to make the device available.
+ */
+static int spinand_probe(struct spi_device *spi_nand)
+{
+	struct mtd_info *mtd;
+	struct nand_chip *chip;
+	struct spinand_info *info;
+	struct spinand_state *state;
+	struct mtd_part_parser_data ppdata;
+
+	info  = devm_kzalloc(&spi_nand->dev, sizeof(struct spinand_info),
+			GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->spi = spi_nand;
+
+	spinand_lock_block(spi_nand, BL_ALL_UNLOCKED);
+
+	state = devm_kzalloc(&spi_nand->dev, sizeof(struct spinand_state),
+			GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	info->priv	= state;
+	state->buf_ptr	= 0;
+	state->buf	= devm_kzalloc(&spi_nand->dev, BUFSIZE, GFP_KERNEL);
+	if (!state->buf)
+		return -ENOMEM;
+
+	chip = devm_kzalloc(&spi_nand->dev, sizeof(struct nand_chip),
+			GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+	chip->ecc.mode	= NAND_ECC_HW;
+	chip->ecc.size	= 0x200;
+	chip->ecc.bytes	= 0x6;
+	chip->ecc.steps	= 0x4;
+
+	chip->ecc.strength = 1;
+	chip->ecc.total	= chip->ecc.steps * chip->ecc.bytes;
+	chip->ecc.layout = &spinand_oob_64;
+	chip->ecc.read_page = spinand_read_page_hwecc;
+	chip->ecc.write_page = spinand_write_page_hwecc;
+#else
+	chip->ecc.mode	= NAND_ECC_SOFT;
+	if (spinand_disable_ecc(spi_nand) < 0)
+		pr_info("%s: disable ecc failed!\n", __func__);
+#endif
+
+	chip->priv	= info;
+	chip->read_buf	= spinand_read_buf;
+	chip->write_buf	= spinand_write_buf;
+	chip->read_byte	= spinand_read_byte;
+	chip->cmdfunc	= spinand_cmdfunc;
+	chip->waitfunc	= spinand_wait;
+	chip->options	|= NAND_CACHEPRG;
+	chip->select_chip = spinand_select_chip;
+
+	mtd = devm_kzalloc(&spi_nand->dev, sizeof(struct mtd_info), GFP_KERNEL);
+	if (!mtd)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi_nand->dev, mtd);
+
+	mtd->priv = chip;
+	mtd->name = dev_name(&spi_nand->dev);
+	mtd->owner = THIS_MODULE;
+	mtd->oobsize = 64;
+
+	if (nand_scan(mtd, 1))
+		return -ENXIO;
+
+	ppdata.of_node = spi_nand->dev.of_node;
+	return mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+}
+
+/*
+ * spinand_remove: Remove the device driver
+ * @spi: the spi device.
+ *
+ * Description:
+ *   To remove the device driver parameters and free up allocated memories.
+ */
+static int spinand_remove(struct spi_device *spi)
+{
+	mtd_device_unregister(dev_get_drvdata(&spi->dev));
+
+	return 0;
+}
+
+static const struct of_device_id spinand_dt[] = {
+	{ .compatible = "spinand,mt29f", },
+};
+
+/*
+ * Device name structure description
+ */
+static struct spi_driver spinand_driver = {
+	.driver = {
+		.name		= "mt29f",
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+		.of_match_table	= spinand_dt,
+	},
+	.probe		= spinand_probe,
+	.remove		= spinand_remove,
+};
+
+module_spi_driver(spinand_driver);
+
+MODULE_DESCRIPTION("SPI NAND driver for Micron");
+MODULE_AUTHOR("Henry Pan <hspan@micron.com>, Kamlakant Patel <kamlakant.patel@broadcom.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.h b/drivers/staging/mt29f_spinand/mt29f_spinand.h
new file mode 100644
index 0000000..7f2c24d
--- /dev/null
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.h
@@ -0,0 +1,107 @@
+/*-
+ * Copyright 2013 Broadcom Corporation
+ *
+ * Copyright (c) 2009-2010 Micron Technology, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Henry Pan <hspan@micron.com>
+ *
+ * based on nand.h
+ */
+#ifndef __LINUX_MTD_SPI_NAND_H
+#define __LINUX_MTD_SPI_NAND_H
+
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mtd/mtd.h>
+
+/* cmd */
+#define CMD_READ			0x13
+#define CMD_READ_RDM			0x03
+#define CMD_PROG_PAGE_CLRCACHE		0x02
+#define CMD_PROG_PAGE			0x84
+#define CMD_PROG_PAGE_EXC		0x10
+#define CMD_ERASE_BLK			0xd8
+#define CMD_WR_ENABLE			0x06
+#define CMD_WR_DISABLE			0x04
+#define CMD_READ_ID			0x9f
+#define CMD_RESET			0xff
+#define CMD_READ_REG			0x0f
+#define CMD_WRITE_REG			0x1f
+
+/* feature/ status reg */
+#define REG_BLOCK_LOCK			0xa0
+#define REG_OTP				0xb0
+#define REG_STATUS			0xc0/* timing */
+
+/* status */
+#define STATUS_OIP_MASK			0x01
+#define STATUS_READY			(0 << 0)
+#define STATUS_BUSY			(1 << 0)
+
+#define STATUS_E_FAIL_MASK		0x04
+#define STATUS_E_FAIL			(1 << 2)
+
+#define STATUS_P_FAIL_MASK		0x08
+#define STATUS_P_FAIL			(1 << 3)
+
+#define STATUS_ECC_MASK			0x30
+#define STATUS_ECC_1BIT_CORRECTED	(1 << 4)
+#define STATUS_ECC_ERROR		(2 << 4)
+#define STATUS_ECC_RESERVED		(3 << 4)
+
+/*ECC enable defines*/
+#define OTP_ECC_MASK			0x10
+#define OTP_ECC_OFF			0
+#define OTP_ECC_ON			1
+
+#define ECC_DISABLED
+#define ECC_IN_NAND
+#define ECC_SOFT
+
+/* block lock */
+#define BL_ALL_LOCKED      0x38
+#define BL_1_2_LOCKED      0x30
+#define BL_1_4_LOCKED      0x28
+#define BL_1_8_LOCKED      0x20
+#define BL_1_16_LOCKED     0x18
+#define BL_1_32_LOCKED     0x10
+#define BL_1_64_LOCKED     0x08
+#define BL_ALL_UNLOCKED    0
+
+struct spinand_info {
+	struct nand_ecclayout *ecclayout;
+	struct spi_device *spi;
+	void *priv;
+};
+
+struct spinand_state {
+	uint32_t	col;
+	uint32_t	row;
+	int		buf_ptr;
+	u8		*buf;
+};
+
+struct spinand_cmd {
+	u8		cmd;
+	u32		n_addr;		/* Number of address */
+	u8		addr[3];	/* Reg Offset */
+	u32		n_dummy;	/* Dummy use */
+	u32		n_tx;		/* Number of tx bytes */
+	u8		*tx_buf;	/* Tx buf */
+	u32		n_rx;		/* Number of rx bytes */
+	u8		*rx_buf;	/* Rx buf */
+};
+
+extern int spinand_mtd(struct mtd_info *mtd);
+extern void spinand_mtd_release(struct mtd_info *mtd);
+
+#endif /* __LINUX_MTD_SPI_NAND_H */
diff --git a/drivers/staging/netlogic/xlr_net.c b/drivers/staging/netlogic/xlr_net.c
index 46eabd0..235d2b1 100644
--- a/drivers/staging/netlogic/xlr_net.c
+++ b/drivers/staging/netlogic/xlr_net.c
@@ -44,8 +44,8 @@
 #include <linux/platform_device.h>
 
 #include <asm/mipsregs.h>
-
-/* fmn.h - For FMN credit configuration and registering fmn_handler.
+/*
+ * fmn.h - For FMN credit configuration and registering fmn_handler.
  * FMN is communication mechanism that allows processing agents within
  * XLR/XLS to communicate each other.
  */
@@ -90,7 +90,8 @@
 {
 	struct sk_buff **back_ptr;
 
-	/* this function should be used only for newly allocated packets.
+	/*
+	 * this function should be used only for newly allocated packets.
 	 * It assumes the first cacheline is for the back pointer related
 	 * book keeping info.
 	 */
@@ -102,7 +103,8 @@
 {
 	struct sk_buff **back_ptr = (struct sk_buff **)skb->data;
 
-	/* this function should be used only for newly allocated packets.
+	/*
+	 * this function should be used only for newly allocated packets.
 	 * It assumes the first cacheline is for the back pointer related
 	 * book keeping info.
 	 */
@@ -500,8 +502,10 @@
 			sizeof(u64));
 }
 
-/* Configure PDE to Round-Robin distribution of packets to the
- * available cpu */
+/*
+ * Configure PDE to Round-Robin distribution of packets to the
+ * available cpu
+ */
 static void xlr_config_pde(struct xlr_net_priv *priv)
 {
 	int i = 0;
@@ -528,8 +532,10 @@
 			((bkt_map >> 32) & 0xffffffff));
 }
 
-/* Setup the Message ring credits, bucket size and other
- * common configuration */
+/*
+ * Setup the Message ring credits, bucket size and other
+ * common configuration
+ */
 static void xlr_config_common(struct xlr_net_priv *priv)
 {
 	struct xlr_fmn_info *gmac = priv->nd->gmac_fmn_info;
@@ -545,8 +551,10 @@
 				bucket_size[i]);
 	}
 
-	/* Setting non-core Credit counter register
-	 * Distributing Gmac's credit to CPU's*/
+	/*
+	 * Setting non-core Credit counter register
+	 * Distributing Gmac's credit to CPU's
+	 */
 	for (i = 0; i < 8; i++) {
 		for (j = 0; j < 8; j++)
 			xlr_nae_wreg(priv->base_addr,
@@ -593,7 +601,8 @@
 	c1 = 3;
 	c2 = 0;
 	for (i = 0; i < 64; i++) {
-		/* On use_bkt set the b0, b1 are used, else
+		/*
+		 * On use_bkt set the b0, b1 are used, else
 		 * the 4 classes are used, here implemented
 		 * a logic to distribute the packets to the
 		 * buckets equally or based on the class
@@ -736,7 +745,8 @@
 	return ret;
 }
 
-/* XLR ports are RGMII. XLS ports are SGMII mostly except the port0,
+/*
+ * XLR ports are RGMII. XLS ports are SGMII mostly except the port0,
  * which can be configured either SGMII or RGMII, considered SGMII
  * by default, if board setup to RGMII the port_type need to set
  * accordingly.Serdes and PCS layer need to configured for SGMII
diff --git a/drivers/staging/netlogic/xlr_net.h b/drivers/staging/netlogic/xlr_net.h
index f91d27e..cea7966 100644
--- a/drivers/staging/netlogic/xlr_net.h
+++ b/drivers/staging/netlogic/xlr_net.h
@@ -1096,4 +1096,4 @@
 	u64 *class_3_spill;
 };
 
-extern void xlr_set_gmac_speed(struct xlr_net_priv *priv);
+void xlr_set_gmac_speed(struct xlr_net_priv *priv);
diff --git a/drivers/staging/nvec/Kconfig b/drivers/staging/nvec/Kconfig
index 7e61ada..9475e20 100644
--- a/drivers/staging/nvec/Kconfig
+++ b/drivers/staging/nvec/Kconfig
@@ -10,7 +10,7 @@
 	tristate "Keyboard on nVidia compliant EC"
 	depends on MFD_NVEC && INPUT
 	help
-	  Say Y here to enable support for a keyboard connected to 
+	  Say Y here to enable support for a keyboard connected to
 	  a nVidia compliant embedded controller.
 
 config SERIO_NVEC_PS2
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 5a5c639..3066ee2 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -802,7 +802,7 @@
 		unmute_speakers[] = { NVEC_OEM0, 0x10, 0x59, 0x95 },
 		enable_event[7] = { NVEC_SYS, CNF_EVENT_REPORTING, true };
 
-	if(!pdev->dev.of_node) {
+	if (!pdev->dev.of_node) {
 		dev_err(&pdev->dev, "must be instantiated using device tree\n");
 		return -ENODEV;
 	}
diff --git a/drivers/staging/octeon-usb/Makefile b/drivers/staging/octeon-usb/Makefile
index 89df1ad..5588be3 100644
--- a/drivers/staging/octeon-usb/Makefile
+++ b/drivers/staging/octeon-usb/Makefile
@@ -1,3 +1 @@
-obj-${CONFIG_OCTEON_USB} := octeon-usb.o
-octeon-usb-y := octeon-hcd.o
-octeon-usb-y += cvmx-usb.o
+obj-${CONFIG_OCTEON_USB} := octeon-hcd.o
diff --git a/drivers/staging/octeon-usb/cvmx-usb.c b/drivers/staging/octeon-usb/cvmx-usb.c
deleted file mode 100644
index 45dfe94..0000000
--- a/drivers/staging/octeon-usb/cvmx-usb.c
+++ /dev/null
@@ -1,3158 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export  control
- * laws, including the U.S. Export Administration Act and its  associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM  NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
- * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * @file
- *
- * "cvmx-usb.c" defines a set of low level USB functions to help
- * developers create Octeon USB drivers for various operating
- * systems. These functions provide a generic API to the Octeon
- * USB blocks, hiding the internal hardware specific
- * operations.
- */
-#include <linux/delay.h>
-#include <asm/octeon/cvmx.h>
-#include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-sysinfo.h>
-#include "cvmx-usbnx-defs.h"
-#include "cvmx-usbcx-defs.h"
-#include "cvmx-usb.h"
-#include <asm/octeon/cvmx-helper.h>
-#include <asm/octeon/cvmx-helper-board.h>
-
-#define CVMX_PREFETCH0(address) CVMX_PREFETCH(address, 0)
-#define CVMX_PREFETCH128(address) CVMX_PREFETCH(address, 128)
-// a normal prefetch
-#define CVMX_PREFETCH(address, offset) CVMX_PREFETCH_PREF0(address, offset)
-// normal prefetches that use the pref instruction
-#define CVMX_PREFETCH_PREFX(X, address, offset) asm volatile ("pref %[type], %[off](%[rbase])" : : [rbase] "d" (address), [off] "I" (offset), [type] "n" (X))
-#define CVMX_PREFETCH_PREF0(address, offset) CVMX_PREFETCH_PREFX(0, address, offset)
-#define CVMX_CLZ(result, input) asm ("clz %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input))
-
-#define MAX_RETRIES		3		/* Maximum number of times to retry failed transactions */
-#define MAX_PIPES		32		/* Maximum number of pipes that can be open at once */
-#define MAX_TRANSACTIONS	256		/* Maximum number of outstanding transactions across all pipes */
-#define MAX_CHANNELS		8		/* Maximum number of hardware channels supported by the USB block */
-#define MAX_USB_ADDRESS		127		/* The highest valid USB device address */
-#define MAX_USB_ENDPOINT	15		/* The highest valid USB endpoint number */
-#define MAX_USB_HUB_PORT	15		/* The highest valid port number on a hub */
-#define MAX_TRANSFER_BYTES	((1<<19)-1)	/* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */
-#define MAX_TRANSFER_PACKETS	((1<<10)-1)	/* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */
-
-/*
- * These defines disable the normal read and write csr. This is so I can add
- * extra debug stuff to the usb specific version and I won't use the normal
- * version by mistake
- */
-#define cvmx_read_csr use_cvmx_usb_read_csr64_instead_of_cvmx_read_csr
-#define cvmx_write_csr use_cvmx_usb_write_csr64_instead_of_cvmx_write_csr
-
-enum cvmx_usb_transaction_flags {
-	__CVMX_USB_TRANSACTION_FLAGS_IN_USE = 1<<16,
-};
-
-enum {
-	USB_CLOCK_TYPE_REF_12,
-	USB_CLOCK_TYPE_REF_24,
-	USB_CLOCK_TYPE_REF_48,
-	USB_CLOCK_TYPE_CRYSTAL_12,
-};
-
-/**
- * Logical transactions may take numerous low level
- * transactions, especially when splits are concerned. This
- * enum represents all of the possible stages a transaction can
- * be in. Note that split completes are always even. This is so
- * the NAK handler can backup to the previous low level
- * transaction with a simple clearing of bit 0.
- */
-enum cvmx_usb_stage {
-	CVMX_USB_STAGE_NON_CONTROL,
-	CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE,
-	CVMX_USB_STAGE_SETUP,
-	CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE,
-	CVMX_USB_STAGE_DATA,
-	CVMX_USB_STAGE_DATA_SPLIT_COMPLETE,
-	CVMX_USB_STAGE_STATUS,
-	CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE,
-};
-
-/**
- * struct cvmx_usb_transaction - describes each pending USB transaction
- *				 regardless of type. These are linked together
- *				 to form a list of pending requests for a pipe.
- *
- * @prev:		Transaction before this one in the pipe.
- * @next:		Transaction after this one in the pipe.
- * @type:		Type of transaction, duplicated of the pipe.
- * @flags:		State flags for this transaction.
- * @buffer:		User's physical buffer address to read/write.
- * @buffer_length:	Size of the user's buffer in bytes.
- * @control_header:	For control transactions, physical address of the 8
- *			byte standard header.
- * @iso_start_frame:	For ISO transactions, the starting frame number.
- * @iso_number_packets:	For ISO transactions, the number of packets in the
- *			request.
- * @iso_packets:	For ISO transactions, the sub packets in the request.
- * @actual_bytes:	Actual bytes transfer for this transaction.
- * @stage:		For control transactions, the current stage.
- * @callback:		User's callback function when complete.
- * @callback_data:	User's data.
- */
-struct cvmx_usb_transaction {
-	struct cvmx_usb_transaction *prev;
-	struct cvmx_usb_transaction *next;
-	enum cvmx_usb_transfer type;
-	enum cvmx_usb_transaction_flags flags;
-	uint64_t buffer;
-	int buffer_length;
-	uint64_t control_header;
-	int iso_start_frame;
-	int iso_number_packets;
-	struct cvmx_usb_iso_packet *iso_packets;
-	int xfersize;
-	int pktcnt;
-	int retries;
-	int actual_bytes;
-	enum cvmx_usb_stage stage;
-	cvmx_usb_callback_func_t callback;
-	void *callback_data;
-};
-
-/**
- * struct cvmx_usb_pipe - a pipe represents a virtual connection between Octeon
- *			  and some USB device. It contains a list of pending
- *			  request to the device.
- *
- * @prev:		Pipe before this one in the list
- * @next:		Pipe after this one in the list
- * @head:		The first pending transaction
- * @tail:		The last pending transaction
- * @interval:		For periodic pipes, the interval between packets in
- *			frames
- * @next_tx_frame:	The next frame this pipe is allowed to transmit on
- * @flags:		State flags for this pipe
- * @device_speed:	Speed of device connected to this pipe
- * @transfer_type:	Type of transaction supported by this pipe
- * @transfer_dir:	IN or OUT. Ignored for Control
- * @multi_count:	Max packet in a row for the device
- * @max_packet:		The device's maximum packet size in bytes
- * @device_addr:	USB device address at other end of pipe
- * @endpoint_num:	USB endpoint number at other end of pipe
- * @hub_device_addr:	Hub address this device is connected to
- * @hub_port:		Hub port this device is connected to
- * @pid_toggle:		This toggles between 0/1 on every packet send to track
- *			the data pid needed
- * @channel:		Hardware DMA channel for this pipe
- * @split_sc_frame:	The low order bits of the frame number the split
- *			complete should be sent on
- */
-struct cvmx_usb_pipe {
-	struct cvmx_usb_pipe *prev;
-	struct cvmx_usb_pipe *next;
-	struct cvmx_usb_transaction *head;
-	struct cvmx_usb_transaction *tail;
-	uint64_t interval;
-	uint64_t next_tx_frame;
-	enum cvmx_usb_pipe_flags flags;
-	enum cvmx_usb_speed device_speed;
-	enum cvmx_usb_transfer transfer_type;
-	enum cvmx_usb_direction transfer_dir;
-	int multi_count;
-	uint16_t max_packet;
-	uint8_t device_addr;
-	uint8_t endpoint_num;
-	uint8_t hub_device_addr;
-	uint8_t hub_port;
-	uint8_t pid_toggle;
-	uint8_t channel;
-	int8_t split_sc_frame;
-};
-
-/**
- * struct cvmx_usb_pipe_list
- *
- * @head: Head of the list, or NULL if empty.
- * @tail: Tail if the list, or NULL if empty.
- */
-struct cvmx_usb_pipe_list {
-	struct cvmx_usb_pipe *head;
-	struct cvmx_usb_pipe *tail;
-};
-
-struct cvmx_usb_tx_fifo {
-	struct {
-		int channel;
-		int size;
-		uint64_t address;
-	} entry[MAX_CHANNELS+1];
-	int head;
-	int tail;
-};
-
-/**
- * struct cvmx_usb_internal_state - the state of the USB block
- *
- * init_flags:		   Flags passed to initialize.
- * index:		   Which USB block this is for.
- * idle_hardware_channels: Bit set for every idle hardware channel.
- * usbcx_hprt:		   Stored port status so we don't need to read a CSR to
- *			   determine splits.
- * pipe_for_channel:	   Map channels to pipes.
- * free_transaction_head:  List of free transactions head.
- * free_transaction_tail:  List of free transactions tail.
- * pipe:		   Storage for pipes.
- * transaction:		   Storage for transactions.
- * callback:		   User global callbacks.
- * callback_data:	   User data for each callback.
- * indent:		   Used by debug output to indent functions.
- * port_status:		   Last port status used for change notification.
- * free_pipes:		   List of all pipes that are currently closed.
- * idle_pipes:		   List of open pipes that have no transactions.
- * active_pipes:	   Active pipes indexed by transfer type.
- * frame_number:	   Increments every SOF interrupt for time keeping.
- * active_split:	   Points to the current active split, or NULL.
- */
-struct cvmx_usb_internal_state {
-	int init_flags;
-	int index;
-	int idle_hardware_channels;
-	union cvmx_usbcx_hprt usbcx_hprt;
-	struct cvmx_usb_pipe *pipe_for_channel[MAX_CHANNELS];
-	struct cvmx_usb_transaction *free_transaction_head;
-	struct cvmx_usb_transaction *free_transaction_tail;
-	struct cvmx_usb_pipe pipe[MAX_PIPES];
-	struct cvmx_usb_transaction transaction[MAX_TRANSACTIONS];
-	cvmx_usb_callback_func_t callback[__CVMX_USB_CALLBACK_END];
-	void *callback_data[__CVMX_USB_CALLBACK_END];
-	int indent;
-	struct cvmx_usb_port_status port_status;
-	struct cvmx_usb_pipe_list free_pipes;
-	struct cvmx_usb_pipe_list idle_pipes;
-	struct cvmx_usb_pipe_list active_pipes[4];
-	uint64_t frame_number;
-	struct cvmx_usb_transaction *active_split;
-	struct cvmx_usb_tx_fifo periodic;
-	struct cvmx_usb_tx_fifo nonperiodic;
-};
-
-/* This macro spins on a field waiting for it to reach a value */
-#define CVMX_WAIT_FOR_FIELD32(address, type, field, op, value, timeout_usec)\
-	({int result;							    \
-	do {								    \
-		uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec * \
-			octeon_get_clock_rate() / 1000000;		    \
-		type c;							    \
-		while (1) {						    \
-			c.u32 = __cvmx_usb_read_csr32(usb, address);	    \
-			if (c.s.field op (value)) {			    \
-				result = 0;				    \
-				break;					    \
-			} else if (cvmx_get_cycle() > done) {		    \
-				result = -1;				    \
-				break;					    \
-			} else						    \
-				cvmx_wait(100);				    \
-		}							    \
-	} while (0);							    \
-	result; })
-
-/*
- * This macro logically sets a single field in a CSR. It does the sequence
- * read, modify, and write
- */
-#define USB_SET_FIELD32(address, type, field, value)		\
-	do {							\
-		type c;						\
-		c.u32 = __cvmx_usb_read_csr32(usb, address);	\
-		c.s.field = value;				\
-		__cvmx_usb_write_csr32(usb, address, c.u32);	\
-	} while (0)
-
-/* Returns the IO address to push/pop stuff data from the FIFOs */
-#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
-
-static int octeon_usb_get_clock_type(void)
-{
-	switch (cvmx_sysinfo_get()->board_type) {
-	case CVMX_BOARD_TYPE_BBGW_REF:
-	case CVMX_BOARD_TYPE_LANAI2_A:
-	case CVMX_BOARD_TYPE_LANAI2_U:
-	case CVMX_BOARD_TYPE_LANAI2_G:
-	case CVMX_BOARD_TYPE_UBNT_E100:
-		return USB_CLOCK_TYPE_CRYSTAL_12;
-	}
-	return USB_CLOCK_TYPE_REF_48;
-}
-
-/**
- * Read a USB 32bit CSR. It performs the necessary address swizzle
- * for 32bit CSRs and logs the value in a readable format if
- * debugging is on.
- *
- * @usb:     USB block this access is for
- * @address: 64bit address to read
- *
- * Returns: Result of the read
- */
-static inline uint32_t __cvmx_usb_read_csr32(struct cvmx_usb_internal_state *usb,
-					     uint64_t address)
-{
-	uint32_t result = cvmx_read64_uint32(address ^ 4);
-	return result;
-}
-
-
-/**
- * Write a USB 32bit CSR. It performs the necessary address
- * swizzle for 32bit CSRs and logs the value in a readable format
- * if debugging is on.
- *
- * @usb:     USB block this access is for
- * @address: 64bit address to write
- * @value:   Value to write
- */
-static inline void __cvmx_usb_write_csr32(struct cvmx_usb_internal_state *usb,
-					  uint64_t address, uint32_t value)
-{
-	cvmx_write64_uint32(address ^ 4, value);
-	cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-}
-
-
-/**
- * Read a USB 64bit CSR. It logs the value in a readable format if
- * debugging is on.
- *
- * @usb:     USB block this access is for
- * @address: 64bit address to read
- *
- * Returns: Result of the read
- */
-static inline uint64_t __cvmx_usb_read_csr64(struct cvmx_usb_internal_state *usb,
-					     uint64_t address)
-{
-	uint64_t result = cvmx_read64_uint64(address);
-	return result;
-}
-
-
-/**
- * Write a USB 64bit CSR. It logs the value in a readable format
- * if debugging is on.
- *
- * @usb:     USB block this access is for
- * @address: 64bit address to write
- * @value:   Value to write
- */
-static inline void __cvmx_usb_write_csr64(struct cvmx_usb_internal_state *usb,
-					  uint64_t address, uint64_t value)
-{
-	cvmx_write64_uint64(address, value);
-}
-
-/**
- * Return non zero if this pipe connects to a non HIGH speed
- * device through a high speed hub.
- *
- * @usb:    USB block this access is for
- * @pipe:   Pipe to check
- *
- * Returns: Non zero if we need to do split transactions
- */
-static inline int __cvmx_usb_pipe_needs_split(struct cvmx_usb_internal_state *usb, struct cvmx_usb_pipe *pipe)
-{
-	return ((pipe->device_speed != CVMX_USB_SPEED_HIGH) && (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH));
-}
-
-
-/**
- * Trivial utility function to return the correct PID for a pipe
- *
- * @pipe:   pipe to check
- *
- * Returns: PID for pipe
- */
-static inline int __cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
-{
-	if (pipe->pid_toggle)
-		return 2; /* Data1 */
-	else
-		return 0; /* Data0 */
-}
-
-
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * struct cvmx_usb_state.
- *
- * Returns: Number of port, zero if usb isn't supported
- */
-int cvmx_usb_get_num_ports(void)
-{
-	int arch_ports = 0;
-
-	if (OCTEON_IS_MODEL(OCTEON_CN56XX))
-		arch_ports = 1;
-	else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
-		arch_ports = 2;
-	else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
-		arch_ports = 1;
-	else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
-		arch_ports = 1;
-	else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
-		arch_ports = 1;
-	else
-		arch_ports = 0;
-
-	return arch_ports;
-}
-
-
-/**
- * Allocate a usb transaction for use
- *
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- *
- * Returns: Transaction or NULL
- */
-static inline struct cvmx_usb_transaction *__cvmx_usb_alloc_transaction(struct cvmx_usb_internal_state *usb)
-{
-	struct cvmx_usb_transaction *t;
-	t = usb->free_transaction_head;
-	if (t) {
-		usb->free_transaction_head = t->next;
-		if (!usb->free_transaction_head)
-			usb->free_transaction_tail = NULL;
-	}
-	if (t) {
-		memset(t, 0, sizeof(*t));
-		t->flags = __CVMX_USB_TRANSACTION_FLAGS_IN_USE;
-	}
-	return t;
-}
-
-
-/**
- * Free a usb transaction
- *
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @transaction:
- *		 Transaction to free
- */
-static inline void __cvmx_usb_free_transaction(struct cvmx_usb_internal_state *usb,
-					       struct cvmx_usb_transaction *transaction)
-{
-	transaction->flags = 0;
-	transaction->prev = NULL;
-	transaction->next = NULL;
-	if (usb->free_transaction_tail)
-		usb->free_transaction_tail->next = transaction;
-	else
-		usb->free_transaction_head = transaction;
-	usb->free_transaction_tail = transaction;
-}
-
-
-/**
- * Add a pipe to the tail of a list
- * @list:   List to add pipe to
- * @pipe:   Pipe to add
- */
-static inline void __cvmx_usb_append_pipe(struct cvmx_usb_pipe_list *list, struct cvmx_usb_pipe *pipe)
-{
-	pipe->next = NULL;
-	pipe->prev = list->tail;
-	if (list->tail)
-		list->tail->next = pipe;
-	else
-		list->head = pipe;
-	list->tail = pipe;
-}
-
-
-/**
- * Remove a pipe from a list
- * @list:   List to remove pipe from
- * @pipe:   Pipe to remove
- */
-static inline void __cvmx_usb_remove_pipe(struct cvmx_usb_pipe_list *list, struct cvmx_usb_pipe *pipe)
-{
-	if (list->head == pipe) {
-		list->head = pipe->next;
-		pipe->next = NULL;
-		if (list->head)
-			list->head->prev = NULL;
-		else
-			list->tail = NULL;
-	} else if (list->tail == pipe) {
-		list->tail = pipe->prev;
-		list->tail->next = NULL;
-		pipe->prev = NULL;
-	} else {
-		pipe->prev->next = pipe->next;
-		pipe->next->prev = pipe->prev;
-		pipe->prev = NULL;
-		pipe->next = NULL;
-	}
-}
-
-
-/**
- * Initialize a USB port for use. This must be called before any
- * other access to the Octeon USB port is made. The port starts
- * off in the disabled state.
- *
- * @state:	 Pointer to an empty struct cvmx_usb_state
- *		 that will be populated by the initialize call.
- *		 This structure is then passed to all other USB
- *		 functions.
- * @usb_port_number:
- *		 Which Octeon USB port to initialize.
- * @flags:	 Flags to control hardware initialization. See
- *		 enum cvmx_usb_initialize_flags for the flag
- *		 definitions. Some flags are mandatory.
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_initialize(struct cvmx_usb_state *state, int usb_port_number,
-			enum cvmx_usb_initialize_flags flags)
-{
-	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
-	union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	usb->init_flags = flags;
-
-	/* Make sure that state is large enough to store the internal state */
-	if (sizeof(*state) < sizeof(*usb))
-		return -EINVAL;
-	/* At first allow 0-1 for the usb port number */
-	if ((usb_port_number < 0) || (usb_port_number > 1))
-		return -EINVAL;
-	/* For all chips except 52XX there is only one port */
-	if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
-		return -EINVAL;
-	/* Try to determine clock type automatically */
-	if ((flags & (CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI |
-		      CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)) == 0) {
-		if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12)
-			flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;  /* Only 12 MHZ crystals are supported */
-		else
-			flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
-	}
-
-	if (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
-		/* Check for auto ref clock frequency */
-		if (!(flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK))
-			switch (octeon_usb_get_clock_type()) {
-			case USB_CLOCK_TYPE_REF_12:
-				flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
-				break;
-			case USB_CLOCK_TYPE_REF_24:
-				flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
-				break;
-			case USB_CLOCK_TYPE_REF_48:
-				flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
-				break;
-			default:
-				return -EINVAL;
-				break;
-			}
-	}
-
-	memset(usb, 0, sizeof(*usb));
-	usb->init_flags = flags;
-
-	/* Initialize the USB state structure */
-	{
-		int i;
-		usb->index = usb_port_number;
-
-		/* Initialize the transaction double linked list */
-		usb->free_transaction_head = NULL;
-		usb->free_transaction_tail = NULL;
-		for (i = 0; i < MAX_TRANSACTIONS; i++)
-			__cvmx_usb_free_transaction(usb, usb->transaction + i);
-		for (i = 0; i < MAX_PIPES; i++)
-			__cvmx_usb_append_pipe(&usb->free_pipes, usb->pipe + i);
-	}
-
-	/*
-	 * Power On Reset and PHY Initialization
-	 *
-	 * 1. Wait for DCOK to assert (nothing to do)
-	 *
-	 * 2a. Write USBN0/1_CLK_CTL[POR] = 1 and
-	 *     USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0
-	 */
-	usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
-	usbn_clk_ctl.s.por = 1;
-	usbn_clk_ctl.s.hrst = 0;
-	usbn_clk_ctl.s.prst = 0;
-	usbn_clk_ctl.s.hclk_rst = 0;
-	usbn_clk_ctl.s.enable = 0;
-	/*
-	 * 2b. Select the USB reference clock/crystal parameters by writing
-	 *     appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON]
-	 */
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
-		/*
-		 * The USB port uses 12/24/48MHz 2.5V board clock
-		 * source at USB_XO. USB_XI should be tied to GND.
-		 * Most Octeon evaluation boards require this setting
-		 */
-		if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
-			usbn_clk_ctl.cn31xx.p_rclk  = 1; /* From CN31XX,CN30XX manual */
-			usbn_clk_ctl.cn31xx.p_xenbn = 0;
-		} else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
-			usbn_clk_ctl.cn56xx.p_rtype = 2; /* From CN56XX,CN50XX manual */
-		else
-			usbn_clk_ctl.cn52xx.p_rtype = 1; /* From CN52XX manual */
-
-		switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
-		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
-			usbn_clk_ctl.s.p_c_sel = 0;
-			break;
-		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:
-			usbn_clk_ctl.s.p_c_sel = 1;
-			break;
-		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:
-			usbn_clk_ctl.s.p_c_sel = 2;
-			break;
-		}
-	} else {
-		/*
-		 * The USB port uses a 12MHz crystal as clock source
-		 * at USB_XO and USB_XI
-		 */
-		if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
-			usbn_clk_ctl.cn31xx.p_rclk  = 1; /* From CN31XX,CN30XX manual */
-			usbn_clk_ctl.cn31xx.p_xenbn = 1;
-		} else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
-			usbn_clk_ctl.cn56xx.p_rtype = 0; /* From CN56XX,CN50XX manual */
-		else
-			usbn_clk_ctl.cn52xx.p_rtype = 0; /* From CN52XX manual */
-
-		usbn_clk_ctl.s.p_c_sel = 0;
-	}
-	/*
-	 * 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and
-	 *     setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down
-	 *     such that USB is as close as possible to 125Mhz
-	 */
-	{
-		int divisor = (octeon_get_clock_rate()+125000000-1)/125000000;
-		if (divisor < 4)  /* Lower than 4 doesn't seem to work properly */
-			divisor = 4;
-		usbn_clk_ctl.s.divide = divisor;
-		usbn_clk_ctl.s.divide2 = 0;
-	}
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-			       usbn_clk_ctl.u64);
-	/* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */
-	usbn_clk_ctl.s.hclk_rst = 1;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-			       usbn_clk_ctl.u64);
-	/* 2e.  Wait 64 core-clock cycles for HCLK to stabilize */
-	cvmx_wait(64);
-	/*
-	 * 3. Program the power-on reset field in the USBN clock-control
-	 *    register:
-	 *    USBN_CLK_CTL[POR] = 0
-	 */
-	usbn_clk_ctl.s.por = 0;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-			       usbn_clk_ctl.u64);
-	/* 4. Wait 1 ms for PHY clock to start */
-	mdelay(1);
-	/*
-	 * 5. Program the Reset input from automatic test equipment field in the
-	 *    USBP control and status register:
-	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 1
-	 */
-	usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index));
-	usbn_usbp_ctl_status.s.ate_reset = 1;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-			       usbn_usbp_ctl_status.u64);
-	/* 6. Wait 10 cycles */
-	cvmx_wait(10);
-	/*
-	 * 7. Clear ATE_RESET field in the USBN clock-control register:
-	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 0
-	 */
-	usbn_usbp_ctl_status.s.ate_reset = 0;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-			       usbn_usbp_ctl_status.u64);
-	/*
-	 * 8. Program the PHY reset field in the USBN clock-control register:
-	 *    USBN_CLK_CTL[PRST] = 1
-	 */
-	usbn_clk_ctl.s.prst = 1;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-			       usbn_clk_ctl.u64);
-	/*
-	 * 9. Program the USBP control and status register to select host or
-	 *    device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for
-	 *    device
-	 */
-	usbn_usbp_ctl_status.s.hst_mode = 0;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-			       usbn_usbp_ctl_status.u64);
-	/* 10. Wait 1 us */
-	udelay(1);
-	/*
-	 * 11. Program the hreset_n field in the USBN clock-control register:
-	 *     USBN_CLK_CTL[HRST] = 1
-	 */
-	usbn_clk_ctl.s.hrst = 1;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-			       usbn_clk_ctl.u64);
-	/* 12. Proceed to USB core initialization */
-	usbn_clk_ctl.s.enable = 1;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-			       usbn_clk_ctl.u64);
-	udelay(1);
-
-	/*
-	 * USB Core Initialization
-	 *
-	 * 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to
-	 *    determine USB core configuration parameters.
-	 *
-	 *    Nothing needed
-	 *
-	 * 2. Program the following fields in the global AHB configuration
-	 *    register (USBC_GAHBCFG)
-	 *    DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode
-	 *    Burst length, USBC_GAHBCFG[HBSTLEN] = 0
-	 *    Nonperiodic TxFIFO empty level (slave mode only),
-	 *    USBC_GAHBCFG[NPTXFEMPLVL]
-	 *    Periodic TxFIFO empty level (slave mode only),
-	 *    USBC_GAHBCFG[PTXFEMPLVL]
-	 *    Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1
-	 */
-	{
-		union cvmx_usbcx_gahbcfg usbcx_gahbcfg;
-		/* Due to an errata, CN31XX doesn't support DMA */
-		if (OCTEON_IS_MODEL(OCTEON_CN31XX))
-			usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
-		usbcx_gahbcfg.u32 = 0;
-		usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-			usb->idle_hardware_channels = 0x1;  /* Only use one channel with non DMA */
-		else if (OCTEON_IS_MODEL(OCTEON_CN5XXX))
-			usb->idle_hardware_channels = 0xf7; /* CN5XXX have an errata with channel 3 */
-		else
-			usb->idle_hardware_channels = 0xff;
-		usbcx_gahbcfg.s.hbstlen = 0;
-		usbcx_gahbcfg.s.nptxfemplvl = 1;
-		usbcx_gahbcfg.s.ptxfemplvl = 1;
-		usbcx_gahbcfg.s.glblintrmsk = 1;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index),
-				       usbcx_gahbcfg.u32);
-	}
-	/*
-	 * 3. Program the following fields in USBC_GUSBCFG register.
-	 *    HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0
-	 *    ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0
-	 *    USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5
-	 *    PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0
-	 */
-	{
-		union cvmx_usbcx_gusbcfg usbcx_gusbcfg;
-		usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index));
-		usbcx_gusbcfg.s.toutcal = 0;
-		usbcx_gusbcfg.s.ddrsel = 0;
-		usbcx_gusbcfg.s.usbtrdtim = 0x5;
-		usbcx_gusbcfg.s.phylpwrclksel = 0;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index),
-				       usbcx_gusbcfg.u32);
-	}
-	/*
-	 * 4. The software must unmask the following bits in the USBC_GINTMSK
-	 *    register.
-	 *    OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1
-	 *    Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1
-	 */
-	{
-		union cvmx_usbcx_gintmsk usbcx_gintmsk;
-		int channel;
-
-		usbcx_gintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTMSK(usb->index));
-		usbcx_gintmsk.s.otgintmsk = 1;
-		usbcx_gintmsk.s.modemismsk = 1;
-		usbcx_gintmsk.s.hchintmsk = 1;
-		usbcx_gintmsk.s.sofmsk = 0;
-		/* We need RX FIFO interrupts if we don't have DMA */
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-			usbcx_gintmsk.s.rxflvlmsk = 1;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
-				       usbcx_gintmsk.u32);
-
-		/* Disable all channel interrupts. We'll enable them per channel later */
-		for (channel = 0; channel < 8; channel++)
-			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
-	}
-
-	{
-		/*
-		 * Host Port Initialization
-		 *
-		 * 1. Program the host-port interrupt-mask field to unmask,
-		 *    USBC_GINTMSK[PRTINT] = 1
-		 */
-		USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk,
-				prtintmsk, 1);
-		USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk,
-				disconnintmsk, 1);
-		/*
-		 * 2. Program the USBC_HCFG register to select full-speed host
-		 *    or high-speed host.
-		 */
-		{
-			union cvmx_usbcx_hcfg usbcx_hcfg;
-			usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index));
-			usbcx_hcfg.s.fslssupp = 0;
-			usbcx_hcfg.s.fslspclksel = 0;
-			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32);
-		}
-		/*
-		 * 3. Program the port power bit to drive VBUS on the USB,
-		 *    USBC_HPRT[PRTPWR] = 1
-		 */
-		USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtpwr, 1);
-
-		/*
-		 * Steps 4-15 from the manual are done later in the port enable
-		 */
-	}
-
-	return 0;
-}
-
-
-/**
- * Shutdown a USB port after a call to cvmx_usb_initialize().
- * The port should be disabled with all pipes closed when this
- * function is called.
- *
- * @state: USB device state populated by
- *	   cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_shutdown(struct cvmx_usb_state *state)
-{
-	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	/* Make sure all pipes are closed */
-	if (usb->idle_pipes.head ||
-		usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS].head ||
-		usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT].head ||
-		usb->active_pipes[CVMX_USB_TRANSFER_CONTROL].head ||
-		usb->active_pipes[CVMX_USB_TRANSFER_BULK].head)
-		return -EBUSY;
-
-	/* Disable the clocks and put them in power on reset */
-	usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
-	usbn_clk_ctl.s.enable = 1;
-	usbn_clk_ctl.s.por = 1;
-	usbn_clk_ctl.s.hclk_rst = 1;
-	usbn_clk_ctl.s.prst = 0;
-	usbn_clk_ctl.s.hrst = 0;
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-			       usbn_clk_ctl.u64);
-	return 0;
-}
-
-
-/**
- * Enable a USB port. After this call succeeds, the USB port is
- * online and servicing requests.
- *
- * @state: USB device state populated by
- *	   cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_enable(struct cvmx_usb_state *state)
-{
-	union cvmx_usbcx_ghwcfg3 usbcx_ghwcfg3;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-
-	/*
-	 * If the port is already enabled the just return. We don't need to do
-	 * anything
-	 */
-	if (usb->usbcx_hprt.s.prtena)
-		return 0;
-
-	/* If there is nothing plugged into the port then fail immediately */
-	if (!usb->usbcx_hprt.s.prtconnsts) {
-		return -ETIMEDOUT;
-	}
-
-	/* Program the port reset bit to start the reset process */
-	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtrst, 1);
-
-	/*
-	 * Wait at least 50ms (high speed), or 10ms (full speed) for the reset
-	 * process to complete.
-	 */
-	mdelay(50);
-
-	/* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
-	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtrst, 0);
-
-	/* Wait for the USBC_HPRT[PRTENA]. */
-	if (CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt,
-				  prtena, ==, 1, 100000))
-		return -ETIMEDOUT;
-
-	/* Read the port speed field to get the enumerated speed, USBC_HPRT[PRTSPD]. */
-	usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-	usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index));
-
-	/*
-	 * 13. Program the USBC_GRXFSIZ register to select the size of the
-	 *     receive FIFO (25%).
-	 */
-	USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), union cvmx_usbcx_grxfsiz,
-			rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4);
-	/*
-	 * 14. Program the USBC_GNPTXFSIZ register to select the size and the
-	 *     start address of the non- periodic transmit FIFO for nonperiodic
-	 *     transactions (50%).
-	 */
-	{
-		union cvmx_usbcx_gnptxfsiz siz;
-		siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index));
-		siz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2;
-		siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32);
-	}
-	/*
-	 * 15. Program the USBC_HPTXFSIZ register to select the size and start
-	 *     address of the periodic transmit FIFO for periodic transactions
-	 *     (25%).
-	 */
-	{
-		union cvmx_usbcx_hptxfsiz siz;
-		siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index));
-		siz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4;
-		siz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), siz.u32);
-	}
-	/* Flush all FIFOs */
-	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl, txfnum, 0x10);
-	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl, txfflsh, 1);
-	CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl,
-			      txfflsh, ==, 0, 100);
-	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl, rxfflsh, 1);
-	CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl,
-			      rxfflsh, ==, 0, 100);
-
-	return 0;
-}
-
-
-/**
- * Disable a USB port. After this call the USB port will not
- * generate data transfers and will not generate events.
- * Transactions in process will fail and call their
- * associated callbacks.
- *
- * @state: USB device state populated by
- *	   cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_disable(struct cvmx_usb_state *state)
-{
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	/* Disable the port */
-	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtena, 1);
-	return 0;
-}
-
-
-/**
- * Get the current state of the USB port. Use this call to
- * determine if the usb port has anything connected, is enabled,
- * or has some sort of error condition. The return value of this
- * call has "changed" bits to signal of the value of some fields
- * have changed between calls. These "changed" fields are based
- * on the last call to cvmx_usb_set_status(). In order to clear
- * them, you must update the status through cvmx_usb_set_status().
- *
- * @state: USB device state populated by
- *	   cvmx_usb_initialize().
- *
- * Returns: Port status information
- */
-struct cvmx_usb_port_status cvmx_usb_get_status(struct cvmx_usb_state *state)
-{
-	union cvmx_usbcx_hprt usbc_hprt;
-	struct cvmx_usb_port_status result;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	memset(&result, 0, sizeof(result));
-
-	usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-	result.port_enabled = usbc_hprt.s.prtena;
-	result.port_over_current = usbc_hprt.s.prtovrcurract;
-	result.port_powered = usbc_hprt.s.prtpwr;
-	result.port_speed = usbc_hprt.s.prtspd;
-	result.connected = usbc_hprt.s.prtconnsts;
-	result.connect_change = (result.connected != usb->port_status.connected);
-
-	return result;
-}
-
-
-/**
- * Set the current state of the USB port. The status is used as
- * a reference for the "changed" bits returned by
- * cvmx_usb_get_status(). Other than serving as a reference, the
- * status passed to this function is not used. No fields can be
- * changed through this call.
- *
- * @state:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @port_status:
- *		 Port status to set, most like returned by cvmx_usb_get_status()
- */
-void cvmx_usb_set_status(struct cvmx_usb_state *state, struct cvmx_usb_port_status port_status)
-{
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-	usb->port_status = port_status;
-	return;
-}
-
-
-/**
- * Convert a USB transaction into a handle
- *
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @transaction:
- *		 Transaction to get handle for
- *
- * Returns: Handle
- */
-static inline int __cvmx_usb_get_submit_handle(struct cvmx_usb_internal_state *usb,
-					       struct cvmx_usb_transaction *transaction)
-{
-	return ((unsigned long)transaction - (unsigned long)usb->transaction) /
-			sizeof(*transaction);
-}
-
-
-/**
- * Convert a USB pipe into a handle
- *
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @pipe:	 Pipe to get handle for
- *
- * Returns: Handle
- */
-static inline int __cvmx_usb_get_pipe_handle(struct cvmx_usb_internal_state *usb,
-					     struct cvmx_usb_pipe *pipe)
-{
-	return ((unsigned long)pipe - (unsigned long)usb->pipe) / sizeof(*pipe);
-}
-
-
-/**
- * Open a virtual pipe between the host and a USB device. A pipe
- * must be opened before data can be transferred between a device
- * and Octeon.
- *
- * @state:	     USB device state populated by
- *		     cvmx_usb_initialize().
- * @flags:	     Optional pipe flags defined in
- *		     enum cvmx_usb_pipe_flags.
- * @device_addr:
- *		     USB device address to open the pipe to
- *		     (0-127).
- * @endpoint_num:
- *		     USB endpoint number to open the pipe to
- *		     (0-15).
- * @device_speed:
- *		     The speed of the device the pipe is going
- *		     to. This must match the device's speed,
- *		     which may be different than the port speed.
- * @max_packet:	     The maximum packet length the device can
- *		     transmit/receive (low speed=0-8, full
- *		     speed=0-1023, high speed=0-1024). This value
- *		     comes from the standard endpoint descriptor
- *		     field wMaxPacketSize bits <10:0>.
- * @transfer_type:
- *		     The type of transfer this pipe is for.
- * @transfer_dir:
- *		     The direction the pipe is in. This is not
- *		     used for control pipes.
- * @interval:	     For ISOCHRONOUS and INTERRUPT transfers,
- *		     this is how often the transfer is scheduled
- *		     for. All other transfers should specify
- *		     zero. The units are in frames (8000/sec at
- *		     high speed, 1000/sec for full speed).
- * @multi_count:
- *		     For high speed devices, this is the maximum
- *		     allowed number of packet per microframe.
- *		     Specify zero for non high speed devices. This
- *		     value comes from the standard endpoint descriptor
- *		     field wMaxPacketSize bits <12:11>.
- * @hub_device_addr:
- *		     Hub device address this device is connected
- *		     to. Devices connected directly to Octeon
- *		     use zero. This is only used when the device
- *		     is full/low speed behind a high speed hub.
- *		     The address will be of the high speed hub,
- *		     not and full speed hubs after it.
- * @hub_port:	     Which port on the hub the device is
- *		     connected. Use zero for devices connected
- *		     directly to Octeon. Like hub_device_addr,
- *		     this is only used for full/low speed
- *		     devices behind a high speed hub.
- *
- * Returns: A non negative value is a pipe handle. Negative
- *	    values are error codes.
- */
-int cvmx_usb_open_pipe(struct cvmx_usb_state *state, enum cvmx_usb_pipe_flags flags,
-		       int device_addr, int endpoint_num,
-		       enum cvmx_usb_speed device_speed, int max_packet,
-		       enum cvmx_usb_transfer transfer_type,
-		       enum cvmx_usb_direction transfer_dir, int interval,
-		       int multi_count, int hub_device_addr, int hub_port)
-{
-	struct cvmx_usb_pipe *pipe;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	if (unlikely((device_addr < 0) || (device_addr > MAX_USB_ADDRESS)))
-		return -EINVAL;
-	if (unlikely((endpoint_num < 0) || (endpoint_num > MAX_USB_ENDPOINT)))
-		return -EINVAL;
-	if (unlikely(device_speed > CVMX_USB_SPEED_LOW))
-		return -EINVAL;
-	if (unlikely((max_packet <= 0) || (max_packet > 1024)))
-		return -EINVAL;
-	if (unlikely(transfer_type > CVMX_USB_TRANSFER_INTERRUPT))
-		return -EINVAL;
-	if (unlikely((transfer_dir != CVMX_USB_DIRECTION_OUT) &&
-		(transfer_dir != CVMX_USB_DIRECTION_IN)))
-		return -EINVAL;
-	if (unlikely(interval < 0))
-		return -EINVAL;
-	if (unlikely((transfer_type == CVMX_USB_TRANSFER_CONTROL) && interval))
-		return -EINVAL;
-	if (unlikely(multi_count < 0))
-		return -EINVAL;
-	if (unlikely((device_speed != CVMX_USB_SPEED_HIGH) &&
-		(multi_count != 0)))
-		return -EINVAL;
-	if (unlikely((hub_device_addr < 0) || (hub_device_addr > MAX_USB_ADDRESS)))
-		return -EINVAL;
-	if (unlikely((hub_port < 0) || (hub_port > MAX_USB_HUB_PORT)))
-		return -EINVAL;
-
-	/* Find a free pipe */
-	pipe = usb->free_pipes.head;
-	if (!pipe)
-		return -ENOMEM;
-	__cvmx_usb_remove_pipe(&usb->free_pipes, pipe);
-	pipe->flags = flags | __CVMX_USB_PIPE_FLAGS_OPEN;
-	if ((device_speed == CVMX_USB_SPEED_HIGH) &&
-		(transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-		(transfer_type == CVMX_USB_TRANSFER_BULK))
-		pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
-	pipe->device_addr = device_addr;
-	pipe->endpoint_num = endpoint_num;
-	pipe->device_speed = device_speed;
-	pipe->max_packet = max_packet;
-	pipe->transfer_type = transfer_type;
-	pipe->transfer_dir = transfer_dir;
-	/*
-	 * All pipes use interval to rate limit NAK processing. Force an
-	 * interval if one wasn't supplied
-	 */
-	if (!interval)
-		interval = 1;
-	if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-		pipe->interval = interval*8;
-		/* Force start splits to be schedule on uFrame 0 */
-		pipe->next_tx_frame = ((usb->frame_number+7)&~7) + pipe->interval;
-	} else {
-		pipe->interval = interval;
-		pipe->next_tx_frame = usb->frame_number + pipe->interval;
-	}
-	pipe->multi_count = multi_count;
-	pipe->hub_device_addr = hub_device_addr;
-	pipe->hub_port = hub_port;
-	pipe->pid_toggle = 0;
-	pipe->split_sc_frame = -1;
-	__cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
-
-	/*
-	 * We don't need to tell the hardware about this pipe yet since
-	 * it doesn't have any submitted requests
-	 */
-
-	return __cvmx_usb_get_pipe_handle(usb, pipe);
-}
-
-
-/**
- * Poll the RX FIFOs and remove data as needed. This function is only used
- * in non DMA mode. It is very important that this function be called quickly
- * enough to prevent FIFO overflow.
- *
- * @usb:	USB device state populated by
- *		cvmx_usb_initialize().
- */
-static void __cvmx_usb_poll_rx_fifo(struct cvmx_usb_internal_state *usb)
-{
-	union cvmx_usbcx_grxstsph rx_status;
-	int channel;
-	int bytes;
-	uint64_t address;
-	uint32_t *ptr;
-
-	rx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GRXSTSPH(usb->index));
-	/* Only read data if IN data is there */
-	if (rx_status.s.pktsts != 2)
-		return;
-	/* Check if no data is available */
-	if (!rx_status.s.bcnt)
-		return;
-
-	channel = rx_status.s.chnum;
-	bytes = rx_status.s.bcnt;
-	if (!bytes)
-		return;
-
-	/* Get where the DMA engine would have written this data */
-	address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8);
-	ptr = cvmx_phys_to_ptr(address);
-	__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, address + bytes);
-
-	/* Loop writing the FIFO data for this packet into memory */
-	while (bytes > 0) {
-		*ptr++ = __cvmx_usb_read_csr32(usb, USB_FIFO_ADDRESS(channel, usb->index));
-		bytes -= 4;
-	}
-	CVMX_SYNCW;
-
-	return;
-}
-
-
-/**
- * Fill the TX hardware fifo with data out of the software
- * fifos
- *
- * @usb:	    USB device state populated by
- *		    cvmx_usb_initialize().
- * @fifo:	    Software fifo to use
- * @available:	    Amount of space in the hardware fifo
- *
- * Returns: Non zero if the hardware fifo was too small and needs
- *	    to be serviced again.
- */
-static int __cvmx_usb_fill_tx_hw(struct cvmx_usb_internal_state *usb, struct cvmx_usb_tx_fifo *fifo, int available)
-{
-	/*
-	 * We're done either when there isn't anymore space or the software FIFO
-	 * is empty
-	 */
-	while (available && (fifo->head != fifo->tail)) {
-		int i = fifo->tail;
-		const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address);
-		uint64_t csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, usb->index) ^ 4;
-		int words = available;
-
-		/* Limit the amount of data to waht the SW fifo has */
-		if (fifo->entry[i].size <= available) {
-			words = fifo->entry[i].size;
-			fifo->tail++;
-			if (fifo->tail > MAX_CHANNELS)
-				fifo->tail = 0;
-		}
-
-		/* Update the next locations and counts */
-		available -= words;
-		fifo->entry[i].address += words * 4;
-		fifo->entry[i].size -= words;
-
-		/*
-		 * Write the HW fifo data. The read every three writes is due
-		 * to an errata on CN3XXX chips
-		 */
-		while (words > 3) {
-			cvmx_write64_uint32(csr_address, *ptr++);
-			cvmx_write64_uint32(csr_address, *ptr++);
-			cvmx_write64_uint32(csr_address, *ptr++);
-			cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-			words -= 3;
-		}
-		cvmx_write64_uint32(csr_address, *ptr++);
-		if (--words) {
-			cvmx_write64_uint32(csr_address, *ptr++);
-			if (--words)
-				cvmx_write64_uint32(csr_address, *ptr++);
-		}
-		cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-	}
-	return fifo->head != fifo->tail;
-}
-
-
-/**
- * Check the hardware FIFOs and fill them as needed
- *
- * @usb:	USB device state populated by
- *		cvmx_usb_initialize().
- */
-static void __cvmx_usb_poll_tx_fifo(struct cvmx_usb_internal_state *usb)
-{
-	if (usb->periodic.head != usb->periodic.tail) {
-		union cvmx_usbcx_hptxsts tx_status;
-		tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXSTS(usb->index));
-		if (__cvmx_usb_fill_tx_hw(usb, &usb->periodic, tx_status.s.ptxfspcavail))
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, ptxfempmsk, 1);
-		else
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, ptxfempmsk, 0);
-	}
-
-	if (usb->nonperiodic.head != usb->nonperiodic.tail) {
-		union cvmx_usbcx_gnptxsts tx_status;
-		tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXSTS(usb->index));
-		if (__cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, tx_status.s.nptxfspcavail))
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, nptxfempmsk, 1);
-		else
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, nptxfempmsk, 0);
-	}
-
-	return;
-}
-
-
-/**
- * Fill the TX FIFO with an outgoing packet
- *
- * @usb:	  USB device state populated by
- *		  cvmx_usb_initialize().
- * @channel:	  Channel number to get packet from
- */
-static void __cvmx_usb_fill_tx_fifo(struct cvmx_usb_internal_state *usb, int channel)
-{
-	union cvmx_usbcx_hccharx hcchar;
-	union cvmx_usbcx_hcspltx usbc_hcsplt;
-	union cvmx_usbcx_hctsizx usbc_hctsiz;
-	struct cvmx_usb_tx_fifo *fifo;
-
-	/* We only need to fill data on outbound channels */
-	hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
-	if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT)
-		return;
-
-	/* OUT Splits only have data on the start and not the complete */
-	usbc_hcsplt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index));
-	if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
-		return;
-
-	/* Find out how many bytes we need to fill and convert it into 32bit words */
-	usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
-	if (!usbc_hctsiz.s.xfersize)
-		return;
-
-	if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) ||
-		(hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS))
-		fifo = &usb->periodic;
-	else
-		fifo = &usb->nonperiodic;
-
-	fifo->entry[fifo->head].channel = channel;
-	fifo->entry[fifo->head].address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8);
-	fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize+3)>>2;
-	fifo->head++;
-	if (fifo->head > MAX_CHANNELS)
-		fifo->head = 0;
-
-	__cvmx_usb_poll_tx_fifo(usb);
-
-	return;
-}
-
-/**
- * Perform channel specific setup for Control transactions. All
- * the generic stuff will already have been done in
- * __cvmx_usb_start_channel()
- *
- * @usb:	  USB device state populated by
- *		  cvmx_usb_initialize().
- * @channel:	  Channel to setup
- * @pipe:	  Pipe for control transaction
- */
-static void __cvmx_usb_start_channel_control(struct cvmx_usb_internal_state *usb,
-					     int channel,
-					     struct cvmx_usb_pipe *pipe)
-{
-	struct cvmx_usb_transaction *transaction = pipe->head;
-	union cvmx_usb_control_header *header =
-		cvmx_phys_to_ptr(transaction->control_header);
-	int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
-	int packets_to_transfer;
-	union cvmx_usbcx_hctsizx usbc_hctsiz;
-
-	usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
-
-	switch (transaction->stage) {
-	case CVMX_USB_STAGE_NON_CONTROL:
-	case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
-		cvmx_dprintf("%s: ERROR - Non control stage\n", __FUNCTION__);
-		break;
-	case CVMX_USB_STAGE_SETUP:
-		usbc_hctsiz.s.pid = 3; /* Setup */
-		bytes_to_transfer = sizeof(*header);
-		/* All Control operations start with a setup going OUT */
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir, CVMX_USB_DIRECTION_OUT);
-		/*
-		 * Setup send the control header instead of the buffer data. The
-		 * buffer data will be used in the next stage
-		 */
-		__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header);
-		break;
-	case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
-		usbc_hctsiz.s.pid = 3; /* Setup */
-		bytes_to_transfer = 0;
-		/* All Control operations start with a setup going OUT */
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir, CVMX_USB_DIRECTION_OUT);
-		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), union cvmx_usbcx_hcspltx, compsplt, 1);
-		break;
-	case CVMX_USB_STAGE_DATA:
-		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-		if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-			if (header->s.request_type & 0x80)
-				bytes_to_transfer = 0;
-			else if (bytes_to_transfer > pipe->max_packet)
-				bytes_to_transfer = pipe->max_packet;
-		}
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				union cvmx_usbcx_hccharx, epdir,
-				((header->s.request_type & 0x80) ?
-					CVMX_USB_DIRECTION_IN :
-					CVMX_USB_DIRECTION_OUT));
-		break;
-	case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
-		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-		if (!(header->s.request_type & 0x80))
-			bytes_to_transfer = 0;
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				union cvmx_usbcx_hccharx, epdir,
-				((header->s.request_type & 0x80) ?
-					CVMX_USB_DIRECTION_IN :
-					CVMX_USB_DIRECTION_OUT));
-		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), union cvmx_usbcx_hcspltx, compsplt, 1);
-		break;
-	case CVMX_USB_STAGE_STATUS:
-		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-		bytes_to_transfer = 0;
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir,
-				((header->s.request_type & 0x80) ?
-					CVMX_USB_DIRECTION_OUT :
-					CVMX_USB_DIRECTION_IN));
-		break;
-	case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
-		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-		bytes_to_transfer = 0;
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir,
-				((header->s.request_type & 0x80) ?
-					CVMX_USB_DIRECTION_OUT :
-					CVMX_USB_DIRECTION_IN));
-		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), union cvmx_usbcx_hcspltx, compsplt, 1);
-		break;
-	}
-
-	/*
-	 * Make sure the transfer never exceeds the byte limit of the hardware.
-	 * Further bytes will be sent as continued transactions
-	 */
-	if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
-		/* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
-		bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
-		bytes_to_transfer *= pipe->max_packet;
-	}
-
-	/*
-	 * Calculate the number of packets to transfer. If the length is zero
-	 * we still need to transfer one packet
-	 */
-	packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
-	if (packets_to_transfer == 0)
-		packets_to_transfer = 1;
-	else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
-		/*
-		 * Limit to one packet when not using DMA. Channels must be
-		 * restarted between every packet for IN transactions, so there
-		 * is no reason to do multiple packets in a row
-		 */
-		packets_to_transfer = 1;
-		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-	} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
-		/*
-		 * Limit the number of packet and data transferred to what the
-		 * hardware can handle
-		 */
-		packets_to_transfer = MAX_TRANSFER_PACKETS;
-		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-	}
-
-	usbc_hctsiz.s.xfersize = bytes_to_transfer;
-	usbc_hctsiz.s.pktcnt = packets_to_transfer;
-
-	__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
-	return;
-}
-
-
-/**
- * Start a channel to perform the pipe's head transaction
- *
- * @usb:	  USB device state populated by
- *		  cvmx_usb_initialize().
- * @channel:	  Channel to setup
- * @pipe:	  Pipe to start
- */
-static void __cvmx_usb_start_channel(struct cvmx_usb_internal_state *usb,
-				     int channel,
-				     struct cvmx_usb_pipe *pipe)
-{
-	struct cvmx_usb_transaction *transaction = pipe->head;
-
-	/* Make sure all writes to the DMA region get flushed */
-	CVMX_SYNCW;
-
-	/* Attach the channel to the pipe */
-	usb->pipe_for_channel[channel] = pipe;
-	pipe->channel = channel;
-	pipe->flags |= __CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-	/* Mark this channel as in use */
-	usb->idle_hardware_channels &= ~(1<<channel);
-
-	/* Enable the channel interrupt bits */
-	{
-		union cvmx_usbcx_hcintx usbc_hcint;
-		union cvmx_usbcx_hcintmskx usbc_hcintmsk;
-		union cvmx_usbcx_haintmsk usbc_haintmsk;
-
-		/* Clear all channel status bits */
-		usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index), usbc_hcint.u32);
-
-		usbc_hcintmsk.u32 = 0;
-		usbc_hcintmsk.s.chhltdmsk = 1;
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-			/* Channels need these extra interrupts when we aren't in DMA mode */
-			usbc_hcintmsk.s.datatglerrmsk = 1;
-			usbc_hcintmsk.s.frmovrunmsk = 1;
-			usbc_hcintmsk.s.bblerrmsk = 1;
-			usbc_hcintmsk.s.xacterrmsk = 1;
-			if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-				/* Splits don't generate xfercompl, so we need ACK and NYET */
-				usbc_hcintmsk.s.nyetmsk = 1;
-				usbc_hcintmsk.s.ackmsk = 1;
-			}
-			usbc_hcintmsk.s.nakmsk = 1;
-			usbc_hcintmsk.s.stallmsk = 1;
-			usbc_hcintmsk.s.xfercomplmsk = 1;
-		}
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), usbc_hcintmsk.u32);
-
-		/* Enable the channel interrupt to propagate */
-		usbc_haintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index));
-		usbc_haintmsk.s.haintmsk |= 1<<channel;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index), usbc_haintmsk.u32);
-	}
-
-	/* Setup the locations the DMA engines use  */
-	{
-		uint64_t dma_address = transaction->buffer + transaction->actual_bytes;
-		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-			dma_address = transaction->buffer + transaction->iso_packets[0].offset + transaction->actual_bytes;
-		__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, dma_address);
-		__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, dma_address);
-	}
-
-	/* Setup both the size of the transfer and the SPLIT characteristics */
-	{
-		union cvmx_usbcx_hcspltx usbc_hcsplt = {.u32 = 0};
-		union cvmx_usbcx_hctsizx usbc_hctsiz = {.u32 = 0};
-		int packets_to_transfer;
-		int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
-
-		/*
-		 * ISOCHRONOUS transactions store each individual transfer size
-		 * in the packet structure, not the global buffer_length
-		 */
-		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-			bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes;
-
-		/*
-		 * We need to do split transactions when we are talking to non
-		 * high speed devices that are behind a high speed hub
-		 */
-		if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-			/*
-			 * On the start split phase (stage is even) record the
-			 * frame number we will need to send the split complete.
-			 * We only store the lower two bits since the time ahead
-			 * can only be two frames
-			 */
-			if ((transaction->stage&1) == 0) {
-				if (transaction->type == CVMX_USB_TRANSFER_BULK)
-					pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f;
-				else
-					pipe->split_sc_frame = (usb->frame_number + 2) & 0x7f;
-			} else
-				pipe->split_sc_frame = -1;
-
-			usbc_hcsplt.s.spltena = 1;
-			usbc_hcsplt.s.hubaddr = pipe->hub_device_addr;
-			usbc_hcsplt.s.prtaddr = pipe->hub_port;
-			usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE);
-
-			/*
-			 * SPLIT transactions can only ever transmit one data
-			 * packet so limit the transfer size to the max packet
-			 * size
-			 */
-			if (bytes_to_transfer > pipe->max_packet)
-				bytes_to_transfer = pipe->max_packet;
-
-			/*
-			 * ISOCHRONOUS OUT splits are unique in that they limit
-			 * data transfers to 188 byte chunks representing the
-			 * begin/middle/end of the data or all
-			 */
-			if (!usbc_hcsplt.s.compsplt &&
-				(pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-				(pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
-				/*
-				 * Clear the split complete frame number as
-				 * there isn't going to be a split complete
-				 */
-				pipe->split_sc_frame = -1;
-				/*
-				 * See if we've started this transfer and sent
-				 * data
-				 */
-				if (transaction->actual_bytes == 0) {
-					/*
-					 * Nothing sent yet, this is either a
-					 * begin or the entire payload
-					 */
-					if (bytes_to_transfer <= 188)
-						usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */
-					else
-						usbc_hcsplt.s.xactpos = 2; /* First part of payload */
-				} else {
-					/*
-					 * Continuing the previous data, we must
-					 * either be in the middle or at the end
-					 */
-					if (bytes_to_transfer <= 188)
-						usbc_hcsplt.s.xactpos = 1; /* End of payload */
-					else
-						usbc_hcsplt.s.xactpos = 0; /* Middle of payload */
-				}
-				/*
-				 * Again, the transfer size is limited to 188
-				 * bytes
-				 */
-				if (bytes_to_transfer > 188)
-					bytes_to_transfer = 188;
-			}
-		}
-
-		/*
-		 * Make sure the transfer never exceeds the byte limit of the
-		 * hardware. Further bytes will be sent as continued
-		 * transactions
-		 */
-		if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
-			/*
-			 * Round MAX_TRANSFER_BYTES to a multiple of out packet
-			 * size
-			 */
-			bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
-			bytes_to_transfer *= pipe->max_packet;
-		}
-
-		/*
-		 * Calculate the number of packets to transfer. If the length is
-		 * zero we still need to transfer one packet
-		 */
-		packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
-		if (packets_to_transfer == 0)
-			packets_to_transfer = 1;
-		else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
-			/*
-			 * Limit to one packet when not using DMA. Channels must
-			 * be restarted between every packet for IN
-			 * transactions, so there is no reason to do multiple
-			 * packets in a row
-			 */
-			packets_to_transfer = 1;
-			bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-		} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
-			/*
-			 * Limit the number of packet and data transferred to
-			 * what the hardware can handle
-			 */
-			packets_to_transfer = MAX_TRANSFER_PACKETS;
-			bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-		}
-
-		usbc_hctsiz.s.xfersize = bytes_to_transfer;
-		usbc_hctsiz.s.pktcnt = packets_to_transfer;
-
-		/* Update the DATA0/DATA1 toggle */
-		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-		/*
-		 * High speed pipes may need a hardware ping before they start
-		 */
-		if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING)
-			usbc_hctsiz.s.dopng = 1;
-
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index), usbc_hcsplt.u32);
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
-	}
-
-	/* Setup the Host Channel Characteristics Register */
-	{
-		union cvmx_usbcx_hccharx usbc_hcchar = {.u32 = 0};
-
-		/*
-		 * Set the startframe odd/even properly. This is only used for
-		 * periodic
-		 */
-		usbc_hcchar.s.oddfrm = usb->frame_number&1;
-
-		/*
-		 * Set the number of back to back packets allowed by this
-		 * endpoint. Split transactions interpret "ec" as the number of
-		 * immediate retries of failure. These retries happen too
-		 * quickly, so we disable these entirely for splits
-		 */
-		if (__cvmx_usb_pipe_needs_split(usb, pipe))
-			usbc_hcchar.s.ec = 1;
-		else if (pipe->multi_count < 1)
-			usbc_hcchar.s.ec = 1;
-		else if (pipe->multi_count > 3)
-			usbc_hcchar.s.ec = 3;
-		else
-			usbc_hcchar.s.ec = pipe->multi_count;
-
-		/* Set the rest of the endpoint specific settings */
-		usbc_hcchar.s.devaddr = pipe->device_addr;
-		usbc_hcchar.s.eptype = transaction->type;
-		usbc_hcchar.s.lspddev = (pipe->device_speed == CVMX_USB_SPEED_LOW);
-		usbc_hcchar.s.epdir = pipe->transfer_dir;
-		usbc_hcchar.s.epnum = pipe->endpoint_num;
-		usbc_hcchar.s.mps = pipe->max_packet;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
-	}
-
-	/* Do transaction type specific fixups as needed */
-	switch (transaction->type) {
-	case CVMX_USB_TRANSFER_CONTROL:
-		__cvmx_usb_start_channel_control(usb, channel, pipe);
-		break;
-	case CVMX_USB_TRANSFER_BULK:
-	case CVMX_USB_TRANSFER_INTERRUPT:
-		break;
-	case CVMX_USB_TRANSFER_ISOCHRONOUS:
-		if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
-			/*
-			 * ISO transactions require different PIDs depending on
-			 * direction and how many packets are needed
-			 */
-			if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
-				if (pipe->multi_count < 2) /* Need DATA0 */
-					USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), union cvmx_usbcx_hctsizx, pid, 0);
-				else /* Need MDATA */
-					USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), union cvmx_usbcx_hctsizx, pid, 3);
-			}
-		}
-		break;
-	}
-	{
-		union cvmx_usbcx_hctsizx usbc_hctsiz = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index))};
-		transaction->xfersize = usbc_hctsiz.s.xfersize;
-		transaction->pktcnt = usbc_hctsiz.s.pktcnt;
-	}
-	/* Remeber when we start a split transaction */
-	if (__cvmx_usb_pipe_needs_split(usb, pipe))
-		usb->active_split = transaction;
-	USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, chena, 1);
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-		__cvmx_usb_fill_tx_fifo(usb, channel);
-	return;
-}
-
-
-/**
- * Find a pipe that is ready to be scheduled to hardware.
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @list:	 Pipe list to search
- * @current_frame:
- *		 Frame counter to use as a time reference.
- *
- * Returns: Pipe or NULL if none are ready
- */
-static struct cvmx_usb_pipe *__cvmx_usb_find_ready_pipe(struct cvmx_usb_internal_state *usb, struct cvmx_usb_pipe_list *list, uint64_t current_frame)
-{
-	struct cvmx_usb_pipe *pipe = list->head;
-	while (pipe) {
-		if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && pipe->head &&
-			(pipe->next_tx_frame <= current_frame) &&
-			((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) &&
-			(!usb->active_split || (usb->active_split == pipe->head))) {
-			CVMX_PREFETCH(pipe, 128);
-			CVMX_PREFETCH(pipe->head, 0);
-			return pipe;
-		}
-		pipe = pipe->next;
-	}
-	return NULL;
-}
-
-
-/**
- * Called whenever a pipe might need to be scheduled to the
- * hardware.
- *
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @is_sof:	 True if this schedule was called on a SOF interrupt.
- */
-static void __cvmx_usb_schedule(struct cvmx_usb_internal_state *usb, int is_sof)
-{
-	int channel;
-	struct cvmx_usb_pipe *pipe;
-	int need_sof;
-	enum cvmx_usb_transfer ttype;
-
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-		/* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */
-		union cvmx_usbcx_hfnum hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))};
-		union cvmx_usbcx_hfir hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))};
-		if (hfnum.s.frrem < hfir.s.frint/4)
-			goto done;
-	}
-
-	while (usb->idle_hardware_channels) {
-		/* Find an idle channel */
-		CVMX_CLZ(channel, usb->idle_hardware_channels);
-		channel = 31 - channel;
-		if (unlikely(channel > 7))
-			break;
-
-		/* Find a pipe needing service */
-		pipe = NULL;
-		if (is_sof) {
-			/*
-			 * Only process periodic pipes on SOF interrupts. This
-			 * way we are sure that the periodic data is sent in the
-			 * beginning of the frame
-			 */
-			pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number);
-			if (likely(!pipe))
-				pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number);
-		}
-		if (likely(!pipe)) {
-			pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number);
-			if (likely(!pipe))
-				pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number);
-		}
-		if (!pipe)
-			break;
-
-		__cvmx_usb_start_channel(usb, channel, pipe);
-	}
-
-done:
-	/*
-	 * Only enable SOF interrupts when we have transactions pending in the
-	 * future that might need to be scheduled
-	 */
-	need_sof = 0;
-	for (ttype = CVMX_USB_TRANSFER_CONTROL; ttype <= CVMX_USB_TRANSFER_INTERRUPT; ttype++) {
-		pipe = usb->active_pipes[ttype].head;
-		while (pipe) {
-			if (pipe->next_tx_frame > usb->frame_number) {
-				need_sof = 1;
-				break;
-			}
-			pipe = pipe->next;
-		}
-	}
-	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, sofmsk, need_sof);
-	return;
-}
-
-
-/**
- * Call a user's callback for a specific reason.
- *
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @pipe:	 Pipe the callback is for or NULL
- * @transaction:
- *		 Transaction the callback is for or NULL
- * @reason:	 Reason this callback is being called
- * @complete_code:
- *		 Completion code for the transaction, if any
- */
-static void __cvmx_usb_perform_callback(struct cvmx_usb_internal_state *usb,
-					struct cvmx_usb_pipe *pipe,
-					struct cvmx_usb_transaction *transaction,
-					enum cvmx_usb_callback reason,
-					enum cvmx_usb_complete complete_code)
-{
-	cvmx_usb_callback_func_t callback = usb->callback[reason];
-	void *user_data = usb->callback_data[reason];
-	int submit_handle = -1;
-	int pipe_handle = -1;
-	int bytes_transferred = 0;
-
-	if (pipe)
-		pipe_handle = __cvmx_usb_get_pipe_handle(usb, pipe);
-
-	if (transaction) {
-		submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
-		bytes_transferred = transaction->actual_bytes;
-		/* Transactions are allowed to override the default callback */
-		if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback) {
-			callback = transaction->callback;
-			user_data = transaction->callback_data;
-		}
-	}
-
-	if (!callback)
-		return;
-
-	callback((struct cvmx_usb_state *)usb, reason, complete_code, pipe_handle, submit_handle,
-		 bytes_transferred, user_data);
-}
-
-
-/**
- * Signal the completion of a transaction and free it. The
- * transaction will be removed from the pipe transaction list.
- *
- * @usb:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @pipe:	 Pipe the transaction is on
- * @transaction:
- *		 Transaction that completed
- * @complete_code:
- *		 Completion code
- */
-static void __cvmx_usb_perform_complete(struct cvmx_usb_internal_state *usb,
-					struct cvmx_usb_pipe *pipe,
-					struct cvmx_usb_transaction *transaction,
-					enum cvmx_usb_complete complete_code)
-{
-	/* If this was a split then clear our split in progress marker */
-	if (usb->active_split == transaction)
-		usb->active_split = NULL;
-
-	/*
-	 * Isochronous transactions need extra processing as they might not be
-	 * done after a single data transfer
-	 */
-	if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
-		/* Update the number of bytes transferred in this ISO packet */
-		transaction->iso_packets[0].length = transaction->actual_bytes;
-		transaction->iso_packets[0].status = complete_code;
-
-		/*
-		 * If there are more ISOs pending and we succeeded, schedule the
-		 * next one
-		 */
-		if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) {
-			transaction->actual_bytes = 0;	   /* No bytes transferred for this packet as of yet */
-			transaction->iso_number_packets--; /* One less ISO waiting to transfer */
-			transaction->iso_packets++;	   /* Increment to the next location in our packet array */
-			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-			goto done;
-		}
-	}
-
-	/* Remove the transaction from the pipe list */
-	if (transaction->next)
-		transaction->next->prev = transaction->prev;
-	else
-		pipe->tail = transaction->prev;
-	if (transaction->prev)
-		transaction->prev->next = transaction->next;
-	else
-		pipe->head = transaction->next;
-	if (!pipe->head) {
-		__cvmx_usb_remove_pipe(usb->active_pipes + pipe->transfer_type, pipe);
-		__cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
-
-	}
-	__cvmx_usb_perform_callback(usb, pipe, transaction,
-				    CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
-				    complete_code);
-	__cvmx_usb_free_transaction(usb, transaction);
-done:
-	return;
-}
-
-
-/**
- * Submit a usb transaction to a pipe. Called for all types
- * of transactions.
- *
- * @usb:
- * @pipe_handle:
- *		    Which pipe to submit to. Will be validated in this function.
- * @type:	    Transaction type
- * @flags:	    Flags for the transaction
- * @buffer:	    User buffer for the transaction
- * @buffer_length:
- *		    User buffer's length in bytes
- * @control_header:
- *		    For control transactions, the 8 byte standard header
- * @iso_start_frame:
- *		    For ISO transactions, the start frame
- * @iso_number_packets:
- *		    For ISO, the number of packet in the transaction.
- * @iso_packets:
- *		    A description of each ISO packet
- * @callback:	    User callback to call when the transaction completes
- * @user_data:	    User's data for the callback
- *
- * Returns: Submit handle or negative on failure. Matches the result
- *	    in the external API.
- */
-static int __cvmx_usb_submit_transaction(struct cvmx_usb_internal_state *usb,
-					 int pipe_handle,
-					 enum cvmx_usb_transfer type,
-					 int flags,
-					 uint64_t buffer,
-					 int buffer_length,
-					 uint64_t control_header,
-					 int iso_start_frame,
-					 int iso_number_packets,
-					 struct cvmx_usb_iso_packet *iso_packets,
-					 cvmx_usb_callback_func_t callback,
-					 void *user_data)
-{
-	int submit_handle;
-	struct cvmx_usb_transaction *transaction;
-	struct cvmx_usb_pipe *pipe = usb->pipe + pipe_handle;
-
-	if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-		return -EINVAL;
-	/* Fail if the pipe isn't open */
-	if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-		return -EINVAL;
-	if (unlikely(pipe->transfer_type != type))
-		return -EINVAL;
-
-	transaction = __cvmx_usb_alloc_transaction(usb);
-	if (unlikely(!transaction))
-		return -ENOMEM;
-
-	transaction->type = type;
-	transaction->flags |= flags;
-	transaction->buffer = buffer;
-	transaction->buffer_length = buffer_length;
-	transaction->control_header = control_header;
-	transaction->iso_start_frame = iso_start_frame; // FIXME: This is not used, implement it
-	transaction->iso_number_packets = iso_number_packets;
-	transaction->iso_packets = iso_packets;
-	transaction->callback = callback;
-	transaction->callback_data = user_data;
-	if (transaction->type == CVMX_USB_TRANSFER_CONTROL)
-		transaction->stage = CVMX_USB_STAGE_SETUP;
-	else
-		transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-
-	transaction->next = NULL;
-	if (pipe->tail) {
-		transaction->prev = pipe->tail;
-		transaction->prev->next = transaction;
-	} else {
-		if (pipe->next_tx_frame < usb->frame_number)
-			pipe->next_tx_frame = usb->frame_number + pipe->interval -
-				(usb->frame_number - pipe->next_tx_frame) % pipe->interval;
-		transaction->prev = NULL;
-		pipe->head = transaction;
-		__cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
-		__cvmx_usb_append_pipe(usb->active_pipes + pipe->transfer_type, pipe);
-	}
-	pipe->tail = transaction;
-
-	submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
-
-	/* We may need to schedule the pipe if this was the head of the pipe */
-	if (!transaction->prev)
-		__cvmx_usb_schedule(usb, 0);
-
-	return submit_handle;
-}
-
-
-/**
- * Call to submit a USB Bulk transfer to a pipe.
- *
- * @state:	    USB device state populated by
- *		    cvmx_usb_initialize().
- * @pipe_handle:
- *		    Handle to the pipe for the transfer.
- * @buffer:	    Physical address of the data buffer in
- *		    memory. Note that this is NOT A POINTER, but
- *		    the full 64bit physical address of the
- *		    buffer. This may be zero if buffer_length is
- *		    zero.
- * @buffer_length:
- *		    Length of buffer in bytes.
- * @callback:	    Function to call when this transaction
- *		    completes. If the return value of this
- *		    function isn't an error, then this function
- *		    is guaranteed to be called when the
- *		    transaction completes. If this parameter is
- *		    NULL, then the generic callback registered
- *		    through cvmx_usb_register_callback is
- *		    called. If both are NULL, then there is no
- *		    way to know when a transaction completes.
- * @user_data:	    User supplied data returned when the
- *		    callback is called. This is only used if
- *		    callback in not NULL.
- *
- * Returns: A submitted transaction handle or negative on
- *	    failure. Negative values are error codes.
- */
-int cvmx_usb_submit_bulk(struct cvmx_usb_state *state, int pipe_handle,
-			 uint64_t buffer, int buffer_length,
-			 cvmx_usb_callback_func_t callback,
-			 void *user_data)
-{
-	int submit_handle;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	/* Pipe handle checking is done later in a common place */
-	if (unlikely(!buffer))
-		return -EINVAL;
-	if (unlikely(buffer_length < 0))
-		return -EINVAL;
-
-	submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-						      CVMX_USB_TRANSFER_BULK,
-						      0, /* flags */
-						      buffer,
-						      buffer_length,
-						      0, /* control_header */
-						      0, /* iso_start_frame */
-						      0, /* iso_number_packets */
-						      NULL, /* iso_packets */
-						      callback,
-						      user_data);
-	return submit_handle;
-}
-
-
-/**
- * Call to submit a USB Interrupt transfer to a pipe.
- *
- * @state:	    USB device state populated by
- *		    cvmx_usb_initialize().
- * @pipe_handle:
- *		    Handle to the pipe for the transfer.
- * @buffer:	    Physical address of the data buffer in
- *		    memory. Note that this is NOT A POINTER, but
- *		    the full 64bit physical address of the
- *		    buffer. This may be zero if buffer_length is
- *		    zero.
- * @buffer_length:
- *		    Length of buffer in bytes.
- * @callback:	    Function to call when this transaction
- *		    completes. If the return value of this
- *		    function isn't an error, then this function
- *		    is guaranteed to be called when the
- *		    transaction completes. If this parameter is
- *		    NULL, then the generic callback registered
- *		    through cvmx_usb_register_callback is
- *		    called. If both are NULL, then there is no
- *		    way to know when a transaction completes.
- * @user_data:	    User supplied data returned when the
- *		    callback is called. This is only used if
- *		    callback in not NULL.
- *
- * Returns: A submitted transaction handle or negative on
- *	    failure. Negative values are error codes.
- */
-int cvmx_usb_submit_interrupt(struct cvmx_usb_state *state, int pipe_handle,
-			      uint64_t buffer, int buffer_length,
-			      cvmx_usb_callback_func_t callback,
-			      void *user_data)
-{
-	int submit_handle;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	/* Pipe handle checking is done later in a common place */
-	if (unlikely(!buffer))
-		return -EINVAL;
-	if (unlikely(buffer_length < 0))
-		return -EINVAL;
-
-	submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-						      CVMX_USB_TRANSFER_INTERRUPT,
-						      0, /* flags */
-						      buffer,
-						      buffer_length,
-						      0, /* control_header */
-						      0, /* iso_start_frame */
-						      0, /* iso_number_packets */
-						      NULL, /* iso_packets */
-						      callback,
-						      user_data);
-	return submit_handle;
-}
-
-
-/**
- * Call to submit a USB Control transfer to a pipe.
- *
- * @state:	    USB device state populated by
- *		    cvmx_usb_initialize().
- * @pipe_handle:
- *		    Handle to the pipe for the transfer.
- * @control_header:
- *		    USB 8 byte control header physical address.
- *		    Note that this is NOT A POINTER, but the
- *		    full 64bit physical address of the buffer.
- * @buffer:	    Physical address of the data buffer in
- *		    memory. Note that this is NOT A POINTER, but
- *		    the full 64bit physical address of the
- *		    buffer. This may be zero if buffer_length is
- *		    zero.
- * @buffer_length:
- *		    Length of buffer in bytes.
- * @callback:	    Function to call when this transaction
- *		    completes. If the return value of this
- *		    function isn't an error, then this function
- *		    is guaranteed to be called when the
- *		    transaction completes. If this parameter is
- *		    NULL, then the generic callback registered
- *		    through cvmx_usb_register_callback is
- *		    called. If both are NULL, then there is no
- *		    way to know when a transaction completes.
- * @user_data:	    User supplied data returned when the
- *		    callback is called. This is only used if
- *		    callback in not NULL.
- *
- * Returns: A submitted transaction handle or negative on
- *	    failure. Negative values are error codes.
- */
-int cvmx_usb_submit_control(struct cvmx_usb_state *state, int pipe_handle,
-			    uint64_t control_header,
-			    uint64_t buffer, int buffer_length,
-			    cvmx_usb_callback_func_t callback,
-			    void *user_data)
-{
-	int submit_handle;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-	union cvmx_usb_control_header *header =
-		cvmx_phys_to_ptr(control_header);
-
-	/* Pipe handle checking is done later in a common place */
-	if (unlikely(!control_header))
-		return -EINVAL;
-	/* Some drivers send a buffer with a zero length. God only knows why */
-	if (unlikely(buffer && (buffer_length < 0)))
-		return -EINVAL;
-	if (unlikely(!buffer && (buffer_length != 0)))
-		return -EINVAL;
-	if ((header->s.request_type & 0x80) == 0)
-		buffer_length = le16_to_cpu(header->s.length);
-
-	submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-						      CVMX_USB_TRANSFER_CONTROL,
-						      0, /* flags */
-						      buffer,
-						      buffer_length,
-						      control_header,
-						      0, /* iso_start_frame */
-						      0, /* iso_number_packets */
-						      NULL, /* iso_packets */
-						      callback,
-						      user_data);
-	return submit_handle;
-}
-
-
-/**
- * Call to submit a USB Isochronous transfer to a pipe.
- *
- * @state:	    USB device state populated by
- *		    cvmx_usb_initialize().
- * @pipe_handle:
- *		    Handle to the pipe for the transfer.
- * @start_frame:
- *		    Number of frames into the future to schedule
- *		    this transaction.
- * @flags:	    Flags to control the transfer. See
- *		    enum cvmx_usb_isochronous_flags for the flag
- *		    definitions.
- * @number_packets:
- *		    Number of sequential packets to transfer.
- *		    "packets" is a pointer to an array of this
- *		    many packet structures.
- * @packets:	    Description of each transfer packet as
- *		    defined by struct cvmx_usb_iso_packet. The array
- *		    pointed to here must stay valid until the
- *		    complete callback is called.
- * @buffer:	    Physical address of the data buffer in
- *		    memory. Note that this is NOT A POINTER, but
- *		    the full 64bit physical address of the
- *		    buffer. This may be zero if buffer_length is
- *		    zero.
- * @buffer_length:
- *		    Length of buffer in bytes.
- * @callback:	    Function to call when this transaction
- *		    completes. If the return value of this
- *		    function isn't an error, then this function
- *		    is guaranteed to be called when the
- *		    transaction completes. If this parameter is
- *		    NULL, then the generic callback registered
- *		    through cvmx_usb_register_callback is
- *		    called. If both are NULL, then there is no
- *		    way to know when a transaction completes.
- * @user_data:	    User supplied data returned when the
- *		    callback is called. This is only used if
- *		    callback in not NULL.
- *
- * Returns: A submitted transaction handle or negative on
- *	    failure. Negative values are error codes.
- */
-int cvmx_usb_submit_isochronous(struct cvmx_usb_state *state, int pipe_handle,
-				int start_frame, int flags,
-				int number_packets,
-				struct cvmx_usb_iso_packet packets[],
-				uint64_t buffer, int buffer_length,
-				cvmx_usb_callback_func_t callback,
-				void *user_data)
-{
-	int submit_handle;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	/* Pipe handle checking is done later in a common place */
-	if (unlikely(start_frame < 0))
-		return -EINVAL;
-	if (unlikely(flags & ~(CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT | CVMX_USB_ISOCHRONOUS_FLAGS_ASAP)))
-		return -EINVAL;
-	if (unlikely(number_packets < 1))
-		return -EINVAL;
-	if (unlikely(!packets))
-		return -EINVAL;
-	if (unlikely(!buffer))
-		return -EINVAL;
-	if (unlikely(buffer_length < 0))
-		return -EINVAL;
-
-	submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-						      CVMX_USB_TRANSFER_ISOCHRONOUS,
-						      flags,
-						      buffer,
-						      buffer_length,
-						      0, /* control_header */
-						      start_frame,
-						      number_packets,
-						      packets,
-						      callback,
-						      user_data);
-	return submit_handle;
-}
-
-
-/**
- * Cancel one outstanding request in a pipe. Canceling a request
- * can fail if the transaction has already completed before cancel
- * is called. Even after a successful cancel call, it may take
- * a frame or two for the cvmx_usb_poll() function to call the
- * associated callback.
- *
- * @state:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @pipe_handle:
- *		 Pipe handle to cancel requests in.
- * @submit_handle:
- *		 Handle to transaction to cancel, returned by the submit function.
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_cancel(struct cvmx_usb_state *state, int pipe_handle, int submit_handle)
-{
-	struct cvmx_usb_transaction *transaction;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-	struct cvmx_usb_pipe *pipe = usb->pipe + pipe_handle;
-
-	if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-		return -EINVAL;
-	if (unlikely((submit_handle < 0) || (submit_handle >= MAX_TRANSACTIONS)))
-		return -EINVAL;
-
-	/* Fail if the pipe isn't open */
-	if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-		return -EINVAL;
-
-	transaction = usb->transaction + submit_handle;
-
-	/* Fail if this transaction already completed */
-	if (unlikely((transaction->flags & __CVMX_USB_TRANSACTION_FLAGS_IN_USE) == 0))
-		return -EINVAL;
-
-	/*
-	 * If the transaction is the HEAD of the queue and scheduled. We need to
-	 * treat it special
-	 */
-	if ((pipe->head == transaction) &&
-		(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) {
-		union cvmx_usbcx_hccharx usbc_hcchar;
-
-		usb->pipe_for_channel[pipe->channel] = NULL;
-		pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-		CVMX_SYNCW;
-
-		usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index));
-		/* If the channel isn't enabled then the transaction already completed */
-		if (usbc_hcchar.s.chena) {
-			usbc_hcchar.s.chdis = 1;
-			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32);
-		}
-	}
-	__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_CANCEL);
-	return 0;
-}
-
-
-/**
- * Cancel all outstanding requests in a pipe. Logically all this
- * does is call cvmx_usb_cancel() in a loop.
- *
- * @state:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @pipe_handle:
- *		 Pipe handle to cancel requests in.
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_cancel_all(struct cvmx_usb_state *state, int pipe_handle)
-{
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-	struct cvmx_usb_pipe *pipe = usb->pipe + pipe_handle;
-
-	if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-		return -EINVAL;
-
-	/* Fail if the pipe isn't open */
-	if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-		return -EINVAL;
-
-	/* Simply loop through and attempt to cancel each transaction */
-	while (pipe->head) {
-		int result = cvmx_usb_cancel(state, pipe_handle,
-			__cvmx_usb_get_submit_handle(usb, pipe->head));
-		if (unlikely(result != 0))
-			return result;
-	}
-	return 0;
-}
-
-
-/**
- * Close a pipe created with cvmx_usb_open_pipe().
- *
- * @state:	 USB device state populated by
- *		 cvmx_usb_initialize().
- * @pipe_handle:
- *		 Pipe handle to close.
- *
- * Returns: 0 or a negative error code. EBUSY is returned if the pipe has
- *	    outstanding transfers.
- */
-int cvmx_usb_close_pipe(struct cvmx_usb_state *state, int pipe_handle)
-{
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-	struct cvmx_usb_pipe *pipe = usb->pipe + pipe_handle;
-
-	if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-		return -EINVAL;
-
-	/* Fail if the pipe isn't open */
-	if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-		return -EINVAL;
-
-	/* Fail if the pipe has pending transactions */
-	if (unlikely(pipe->head))
-		return -EBUSY;
-
-	pipe->flags = 0;
-	__cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
-	__cvmx_usb_append_pipe(&usb->free_pipes, pipe);
-
-	return 0;
-}
-
-
-/**
- * Register a function to be called when various USB events occur.
- *
- * @state:     USB device state populated by
- *	       cvmx_usb_initialize().
- * @reason:    Which event to register for.
- * @callback:  Function to call when the event occurs.
- * @user_data: User data parameter to the function.
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_register_callback(struct cvmx_usb_state *state,
-			       enum cvmx_usb_callback reason,
-			       cvmx_usb_callback_func_t callback,
-			       void *user_data)
-{
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	if (unlikely(reason >= __CVMX_USB_CALLBACK_END))
-		return -EINVAL;
-	if (unlikely(!callback))
-		return -EINVAL;
-
-	usb->callback[reason] = callback;
-	usb->callback_data[reason] = user_data;
-
-	return 0;
-}
-
-
-/**
- * Get the current USB protocol level frame number. The frame
- * number is always in the range of 0-0x7ff.
- *
- * @state: USB device state populated by
- *	   cvmx_usb_initialize().
- *
- * Returns: USB frame number
- */
-int cvmx_usb_get_frame_number(struct cvmx_usb_state *state)
-{
-	int frame_number;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-	union cvmx_usbcx_hfnum usbc_hfnum;
-
-	usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
-	frame_number = usbc_hfnum.s.frnum;
-
-	return frame_number;
-}
-
-
-/**
- * Poll a channel for status
- *
- * @usb:     USB device
- * @channel: Channel to poll
- *
- * Returns: Zero on success
- */
-static int __cvmx_usb_poll_channel(struct cvmx_usb_internal_state *usb, int channel)
-{
-	union cvmx_usbcx_hcintx usbc_hcint;
-	union cvmx_usbcx_hctsizx usbc_hctsiz;
-	union cvmx_usbcx_hccharx usbc_hcchar;
-	struct cvmx_usb_pipe *pipe;
-	struct cvmx_usb_transaction *transaction;
-	int bytes_this_transfer;
-	int bytes_in_last_packet;
-	int packets_processed;
-	int buffer_space_left;
-
-	/* Read the interrupt status bits for the channel */
-	usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
-
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-		usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
-
-		if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) {
-			/*
-			 * There seems to be a bug in CN31XX which can cause
-			 * interrupt IN transfers to get stuck until we do a
-			 * write of HCCHARX without changing things
-			 */
-			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
-			return 0;
-		}
-
-		/*
-		 * In non DMA mode the channels don't halt themselves. We need
-		 * to manually disable channels that are left running
-		 */
-		if (!usbc_hcint.s.chhltd) {
-			if (usbc_hcchar.s.chena) {
-				union cvmx_usbcx_hcintmskx hcintmsk;
-				/* Disable all interrupts except CHHLTD */
-				hcintmsk.u32 = 0;
-				hcintmsk.s.chhltdmsk = 1;
-				__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), hcintmsk.u32);
-				usbc_hcchar.s.chdis = 1;
-				__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
-				return 0;
-			} else if (usbc_hcint.s.xfercompl) {
-				/* Successful IN/OUT with transfer complete. Channel halt isn't needed */
-			} else {
-				cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel);
-				return 0;
-			}
-		}
-	} else {
-		/*
-		 * There is are no interrupts that we need to process when the
-		 * channel is still running
-		 */
-		if (!usbc_hcint.s.chhltd)
-			return 0;
-	}
-
-	/* Disable the channel interrupts now that it is done */
-	__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
-	usb->idle_hardware_channels |= (1<<channel);
-
-	/* Make sure this channel is tied to a valid pipe */
-	pipe = usb->pipe_for_channel[channel];
-	CVMX_PREFETCH(pipe, 0);
-	CVMX_PREFETCH(pipe, 128);
-	if (!pipe)
-		return 0;
-	transaction = pipe->head;
-	CVMX_PREFETCH0(transaction);
-
-	/*
-	 * Disconnect this pipe from the HW channel. Later the schedule
-	 * function will figure out which pipe needs to go
-	 */
-	usb->pipe_for_channel[channel] = NULL;
-	pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-	/*
-	 * Read the channel config info so we can figure out how much data
-	 * transfered
-	 */
-	usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
-	usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
-
-	/*
-	 * Calculating the number of bytes successfully transferred is dependent
-	 * on the transfer direction
-	 */
-	packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt;
-	if (usbc_hcchar.s.epdir) {
-		/*
-		 * IN transactions are easy. For every byte received the
-		 * hardware decrements xfersize. All we need to do is subtract
-		 * the current value of xfersize from its starting value and we
-		 * know how many bytes were written to the buffer
-		 */
-		bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize;
-	} else {
-		/*
-		 * OUT transaction don't decrement xfersize. Instead pktcnt is
-		 * decremented on every successful packet send. The hardware
-		 * does this when it receives an ACK, or NYET. If it doesn't
-		 * receive one of these responses pktcnt doesn't change
-		 */
-		bytes_this_transfer = packets_processed * usbc_hcchar.s.mps;
-		/*
-		 * The last packet may not be a full transfer if we didn't have
-		 * enough data
-		 */
-		if (bytes_this_transfer > transaction->xfersize)
-			bytes_this_transfer = transaction->xfersize;
-	}
-	/* Figure out how many bytes were in the last packet of the transfer */
-	if (packets_processed)
-		bytes_in_last_packet = bytes_this_transfer - (packets_processed-1) * usbc_hcchar.s.mps;
-	else
-		bytes_in_last_packet = bytes_this_transfer;
-
-	/*
-	 * As a special case, setup transactions output the setup header, not
-	 * the user's data. For this reason we don't count setup data as bytes
-	 * transferred
-	 */
-	if ((transaction->stage == CVMX_USB_STAGE_SETUP) ||
-		(transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE))
-		bytes_this_transfer = 0;
-
-	/*
-	 * Add the bytes transferred to the running total. It is important that
-	 * bytes_this_transfer doesn't count any data that needs to be
-	 * retransmitted
-	 */
-	transaction->actual_bytes += bytes_this_transfer;
-	if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-		buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes;
-	else
-		buffer_space_left = transaction->buffer_length - transaction->actual_bytes;
-
-	/*
-	 * We need to remember the PID toggle state for the next transaction.
-	 * The hardware already updated it for the next transaction
-	 */
-	pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0);
-
-	/*
-	 * For high speed bulk out, assume the next transaction will need to do
-	 * a ping before proceeding. If this isn't true the ACK processing below
-	 * will clear this flag
-	 */
-	if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
-		(pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
-		(pipe->transfer_dir == CVMX_USB_DIRECTION_OUT))
-		pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
-
-	if (usbc_hcint.s.stall) {
-		/*
-		 * STALL as a response means this transaction cannot be
-		 * completed because the device can't process transactions. Tell
-		 * the user. Any data that was transferred will be counted on
-		 * the actual bytes transferred
-		 */
-		pipe->pid_toggle = 0;
-		__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL);
-	} else if (usbc_hcint.s.xacterr) {
-		/*
-		 * We know at least one packet worked if we get a ACK or NAK.
-		 * Reset the retry counter
-		 */
-		if (usbc_hcint.s.nak || usbc_hcint.s.ack)
-			transaction->retries = 0;
-		transaction->retries++;
-		if (transaction->retries > MAX_RETRIES) {
-			/*
-			 * XactErr as a response means the device signaled
-			 * something wrong with the transfer. For example, PID
-			 * toggle errors cause these
-			 */
-			__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR);
-		} else {
-			/*
-			 * If this was a split then clear our split in progress
-			 * marker
-			 */
-			if (usb->active_split == transaction)
-				usb->active_split = NULL;
-			/*
-			 * Rewind to the beginning of the transaction by anding
-			 * off the split complete bit
-			 */
-			transaction->stage &= ~1;
-			pipe->split_sc_frame = -1;
-			pipe->next_tx_frame += pipe->interval;
-			if (pipe->next_tx_frame < usb->frame_number)
-				pipe->next_tx_frame = usb->frame_number + pipe->interval -
-						      (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
-		}
-	} else if (usbc_hcint.s.bblerr) {
-		/* Babble Error (BblErr) */
-		__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_BABBLEERR);
-	} else if (usbc_hcint.s.datatglerr) {
-		/* We'll retry the exact same transaction again */
-		transaction->retries++;
-	} else if (usbc_hcint.s.nyet) {
-		/*
-		 * NYET as a response is only allowed in three cases: as a
-		 * response to a ping, as a response to a split transaction, and
-		 * as a response to a bulk out. The ping case is handled by
-		 * hardware, so we only have splits and bulk out
-		 */
-		if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
-			transaction->retries = 0;
-			/*
-			 * If there is more data to go then we need to try
-			 * again. Otherwise this transaction is complete
-			 */
-			if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
-				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-		} else {
-			/*
-			 * Split transactions retry the split complete 4 times
-			 * then rewind to the start split and do the entire
-			 * transactions again
-			 */
-			transaction->retries++;
-			if ((transaction->retries & 0x3) == 0) {
-				/*
-				 * Rewind to the beginning of the transaction by
-				 * anding off the split complete bit
-				 */
-				transaction->stage &= ~1;
-				pipe->split_sc_frame = -1;
-			}
-		}
-	} else if (usbc_hcint.s.ack) {
-		transaction->retries = 0;
-		/*
-		 * The ACK bit can only be checked after the other error bits.
-		 * This is because a multi packet transfer may succeed in a
-		 * number of packets and then get a different response on the
-		 * last packet. In this case both ACK and the last response bit
-		 * will be set. If none of the other response bits is set, then
-		 * the last packet must have been an ACK
-		 *
-		 * Since we got an ACK, we know we don't need to do a ping on
-		 * this pipe
-		 */
-		pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING;
-
-		switch (transaction->type) {
-		case CVMX_USB_TRANSFER_CONTROL:
-			switch (transaction->stage) {
-			case CVMX_USB_STAGE_NON_CONTROL:
-			case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
-				/* This should be impossible */
-				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
-				break;
-			case CVMX_USB_STAGE_SETUP:
-				pipe->pid_toggle = 1;
-				if (__cvmx_usb_pipe_needs_split(usb, pipe))
-					transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE;
-				else {
-					union cvmx_usb_control_header *header =
-						cvmx_phys_to_ptr(transaction->control_header);
-					if (header->s.length)
-						transaction->stage = CVMX_USB_STAGE_DATA;
-					else
-						transaction->stage = CVMX_USB_STAGE_STATUS;
-				}
-				break;
-			case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
-				{
-					union cvmx_usb_control_header *header =
-						cvmx_phys_to_ptr(transaction->control_header);
-					if (header->s.length)
-						transaction->stage = CVMX_USB_STAGE_DATA;
-					else
-						transaction->stage = CVMX_USB_STAGE_STATUS;
-				}
-				break;
-			case CVMX_USB_STAGE_DATA:
-				if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-					transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE;
-					/*
-					 * For setup OUT data that are splits,
-					 * the hardware doesn't appear to count
-					 * transferred data. Here we manually
-					 * update the data transferred
-					 */
-					if (!usbc_hcchar.s.epdir) {
-						if (buffer_space_left < pipe->max_packet)
-							transaction->actual_bytes += buffer_space_left;
-						else
-							transaction->actual_bytes += pipe->max_packet;
-					}
-				} else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
-					pipe->pid_toggle = 1;
-					transaction->stage = CVMX_USB_STAGE_STATUS;
-				}
-				break;
-			case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
-				if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
-					pipe->pid_toggle = 1;
-					transaction->stage = CVMX_USB_STAGE_STATUS;
-				} else {
-					transaction->stage = CVMX_USB_STAGE_DATA;
-				}
-				break;
-			case CVMX_USB_STAGE_STATUS:
-				if (__cvmx_usb_pipe_needs_split(usb, pipe))
-					transaction->stage = CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE;
-				else
-					__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-				break;
-			case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
-				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-				break;
-			}
-			break;
-		case CVMX_USB_TRANSFER_BULK:
-		case CVMX_USB_TRANSFER_INTERRUPT:
-			/*
-			 * The only time a bulk transfer isn't complete when it
-			 * finishes with an ACK is during a split transaction.
-			 * For splits we need to continue the transfer if more
-			 * data is needed
-			 */
-			if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-				if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL)
-					transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
-				else {
-					if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet))
-						transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-					else {
-						if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
-							pipe->next_tx_frame += pipe->interval;
-							__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-					}
-				}
-			} else {
-				if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
-				    (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
-				    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-				    (usbc_hcint.s.nak))
-					pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
-				if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) {
-					if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
-						pipe->next_tx_frame += pipe->interval;
-					__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-				}
-			}
-			break;
-		case CVMX_USB_TRANSFER_ISOCHRONOUS:
-			if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-				/*
-				 * ISOCHRONOUS OUT splits don't require a
-				 * complete split stage. Instead they use a
-				 * sequence of begin OUT splits to transfer the
-				 * data 188 bytes at a time. Once the transfer
-				 * is complete, the pipe sleeps until the next
-				 * schedule interval
-				 */
-				if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
-					/*
-					 * If no space left or this wasn't a max
-					 * size packet then this transfer is
-					 * complete. Otherwise start it again to
-					 * send the next 188 bytes
-					 */
-					if (!buffer_space_left || (bytes_this_transfer < 188)) {
-						pipe->next_tx_frame += pipe->interval;
-						__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-					}
-				} else {
-					if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) {
-						/*
-						 * We are in the incoming data
-						 * phase. Keep getting data
-						 * until we run out of space or
-						 * get a small packet
-						 */
-						if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
-							pipe->next_tx_frame += pipe->interval;
-							__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-						}
-					} else
-						transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
-				}
-			} else {
-				pipe->next_tx_frame += pipe->interval;
-				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-			}
-			break;
-		}
-	} else if (usbc_hcint.s.nak) {
-		/* If this was a split then clear our split in progress marker */
-		if (usb->active_split == transaction)
-			usb->active_split = NULL;
-		/*
-		 * NAK as a response means the device couldn't accept the
-		 * transaction, but it should be retried in the future. Rewind
-		 * to the beginning of the transaction by anding off the split
-		 * complete bit. Retry in the next interval
-		 */
-		transaction->retries = 0;
-		transaction->stage &= ~1;
-		pipe->next_tx_frame += pipe->interval;
-		if (pipe->next_tx_frame < usb->frame_number)
-			pipe->next_tx_frame = usb->frame_number + pipe->interval -
-				(usb->frame_number - pipe->next_tx_frame) % pipe->interval;
-	} else {
-		struct cvmx_usb_port_status port;
-		port = cvmx_usb_get_status((struct cvmx_usb_state *)usb);
-		if (port.port_enabled) {
-			/* We'll retry the exact same transaction again */
-			transaction->retries++;
-		} else {
-			/*
-			 * We get channel halted interrupts with no result bits
-			 * sets when the cable is unplugged
-			 */
-			__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
-		}
-	}
-	return 0;
-}
-
-
-/**
- * Poll the USB block for status and call all needed callback
- * handlers. This function is meant to be called in the interrupt
- * handler for the USB controller. It can also be called
- * periodically in a loop for non-interrupt based operation.
- *
- * @state:	USB device state populated by
- *		cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-int cvmx_usb_poll(struct cvmx_usb_state *state)
-{
-	union cvmx_usbcx_hfnum usbc_hfnum;
-	union cvmx_usbcx_gintsts usbc_gintsts;
-	struct cvmx_usb_internal_state *usb = (struct cvmx_usb_internal_state *)state;
-
-	CVMX_PREFETCH(usb, 0);
-	CVMX_PREFETCH(usb, 1*128);
-	CVMX_PREFETCH(usb, 2*128);
-	CVMX_PREFETCH(usb, 3*128);
-	CVMX_PREFETCH(usb, 4*128);
-
-	/* Update the frame counter */
-	usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
-	if ((usb->frame_number&0x3fff) > usbc_hfnum.s.frnum)
-		usb->frame_number += 0x4000;
-	usb->frame_number &= ~0x3fffull;
-	usb->frame_number |= usbc_hfnum.s.frnum;
-
-	/* Read the pending interrupts */
-	usbc_gintsts.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTSTS(usb->index));
-
-	/* Clear the interrupts now that we know about them */
-	__cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32);
-
-	if (usbc_gintsts.s.rxflvl) {
-		/*
-		 * RxFIFO Non-Empty (RxFLvl)
-		 * Indicates that there is at least one packet pending to be
-		 * read from the RxFIFO.
-		 *
-		 * In DMA mode this is handled by hardware
-		 */
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-			__cvmx_usb_poll_rx_fifo(usb);
-	}
-	if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) {
-		/* Fill the Tx FIFOs when not in DMA mode */
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-			__cvmx_usb_poll_tx_fifo(usb);
-	}
-	if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) {
-		union cvmx_usbcx_hprt usbc_hprt;
-		/*
-		 * Disconnect Detected Interrupt (DisconnInt)
-		 * Asserted when a device disconnect is detected.
-		 *
-		 * Host Port Interrupt (PrtInt)
-		 * The core sets this bit to indicate a change in port status of
-		 * one of the O2P USB core ports in Host mode. The application
-		 * must read the Host Port Control and Status (HPRT) register to
-		 * determine the exact event that caused this interrupt. The
-		 * application must clear the appropriate status bit in the Host
-		 * Port Control and Status register to clear this bit.
-		 *
-		 * Call the user's port callback
-		 */
-		__cvmx_usb_perform_callback(usb, NULL, NULL,
-					    CVMX_USB_CALLBACK_PORT_CHANGED,
-					    CVMX_USB_COMPLETE_SUCCESS);
-		/* Clear the port change bits */
-		usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-		usbc_hprt.s.prtena = 0;
-		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32);
-	}
-	if (usbc_gintsts.s.hchint) {
-		/*
-		 * Host Channels Interrupt (HChInt)
-		 * The core sets this bit to indicate that an interrupt is
-		 * pending on one of the channels of the core (in Host mode).
-		 * The application must read the Host All Channels Interrupt
-		 * (HAINT) register to determine the exact number of the channel
-		 * on which the interrupt occurred, and then read the
-		 * corresponding Host Channel-n Interrupt (HCINTn) register to
-		 * determine the exact cause of the interrupt. The application
-		 * must clear the appropriate status bit in the HCINTn register
-		 * to clear this bit.
-		 */
-		union cvmx_usbcx_haint usbc_haint;
-		usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index));
-		while (usbc_haint.u32) {
-			int channel;
-			CVMX_CLZ(channel, usbc_haint.u32);
-			channel = 31 - channel;
-			__cvmx_usb_poll_channel(usb, channel);
-			usbc_haint.u32 ^= 1<<channel;
-		}
-	}
-
-	__cvmx_usb_schedule(usb, usbc_gintsts.s.sof);
-
-	return 0;
-}
diff --git a/drivers/staging/octeon-usb/cvmx-usb.h b/drivers/staging/octeon-usb/cvmx-usb.h
deleted file mode 100644
index 8bf3696..0000000
--- a/drivers/staging/octeon-usb/cvmx-usb.h
+++ /dev/null
@@ -1,542 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export  control
- * laws, including the U.S. Export Administration Act and its  associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM  NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
- * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * "cvmx-usb.h" defines a set of low level USB functions to help
- * developers create Octeon USB drivers for various operating
- * systems. These functions provide a generic API to the Octeon
- * USB blocks, hiding the internal hardware specific
- * operations.
- *
- * At a high level the device driver needs to:
- *
- * - Call cvmx_usb_get_num_ports() to get the number of
- *   supported ports.
- * - Call cvmx_usb_initialize() for each Octeon USB port.
- * - Enable the port using cvmx_usb_enable().
- * - Either periodically, or in an interrupt handler, call
- *   cvmx_usb_poll() to service USB events.
- * - Manage pipes using cvmx_usb_open_pipe() and
- *   cvmx_usb_close_pipe().
- * - Manage transfers using cvmx_usb_submit_*() and
- *   cvmx_usb_cancel*().
- * - Shutdown USB on unload using cvmx_usb_shutdown().
- *
- * To monitor USB status changes, the device driver must use
- * cvmx_usb_register_callback() to register for events that it
- * is interested in. Below are a few hints on successfully
- * implementing a driver on top of this API.
- *
- * == Initialization ==
- *
- * When a driver is first loaded, it is normally not necessary
- * to bring up the USB port completely. Most operating systems
- * expect to initialize and enable the port in two independent
- * steps. Normally an operating system will probe hardware,
- * initialize anything found, and then enable the hardware.
- *
- * In the probe phase you should:
- * - Use cvmx_usb_get_num_ports() to determine the number of
- *   USB port to be supported.
- * - Allocate space for a struct cvmx_usb_state for each
- *   port.
- * - Tell the operating system about each port
- *
- * In the initialization phase you should:
- * - Use cvmx_usb_initialize() on each port.
- * - Do not call cvmx_usb_enable(). This leaves the USB port in
- *   the disabled state until the operating system is ready.
- *
- * Finally, in the enable phase you should:
- * - Call cvmx_usb_enable() on the appropriate port.
- * - Note that some operating system use a RESET instead of an
- *   enable call. To implement RESET, you should call
- *   cvmx_usb_disable() followed by cvmx_usb_enable().
- *
- * == Locking ==
- *
- * All of the functions in the cvmx-usb API assume exclusive
- * access to the USB hardware and internal data structures. This
- * means that the driver must provide locking as necessary.
- *
- * In the single CPU state it is normally enough to disable
- * interrupts before every call to cvmx_usb*() and enable them
- * again after the call is complete. Keep in mind that it is
- * very common for the callback handlers to make additional
- * calls into cvmx-usb, so the disable/enable must be protected
- * against recursion. As an example, the Linux kernel
- * local_irq_save() and local_irq_restore() are perfect for this
- * in the non SMP case.
- *
- * In the SMP case, locking is more complicated. For SMP you not
- * only need to disable interrupts on the local core, but also
- * take a lock to make sure that another core cannot call
- * cvmx-usb.
- *
- * == Port callback ==
- *
- * The port callback prototype needs to look as follows:
- *
- * void port_callback(struct cvmx_usb_state *usb,
- *                    enum cvmx_usb_callback reason,
- *                    enum cvmx_usb_complete status,
- *                    int pipe_handle,
- *                    int submit_handle,
- *                    int bytes_transferred,
- *                    void *user_data);
- * - "usb" is the struct cvmx_usb_state for the port.
- * - "reason" will always be CVMX_USB_CALLBACK_PORT_CHANGED.
- * - "status" will always be CVMX_USB_COMPLETE_SUCCESS.
- * - "pipe_handle" will always be -1.
- * - "submit_handle" will always be -1.
- * - "bytes_transferred" will always be 0.
- * - "user_data" is the void pointer originally passed along
- *   with the callback. Use this for any state information you
- *   need.
- *
- * The port callback will be called whenever the user plugs /
- * unplugs a device from the port. It will not be called when a
- * device is plugged / unplugged from a hub connected to the
- * root port. Normally all the callback needs to do is tell the
- * operating system to poll the root hub for status. Under
- * Linux, this is performed by calling usb_hcd_poll_rh_status().
- * In the Linux driver we use "user_data". to pass around the
- * Linux "hcd" structure. Once the port callback completes,
- * Linux automatically calls octeon_usb_hub_status_data() which
- * uses cvmx_usb_get_status() to determine the root port status.
- *
- * == Complete callback ==
- *
- * The completion callback prototype needs to look as follows:
- *
- * void complete_callback(struct cvmx_usb_state *usb,
- *                        enum cvmx_usb_callback reason,
- *                        enum cvmx_usb_complete status,
- *                        int pipe_handle,
- *                        int submit_handle,
- *                        int bytes_transferred,
- *                        void *user_data);
- * - "usb" is the struct cvmx_usb_state for the port.
- * - "reason" will always be CVMX_USB_CALLBACK_TRANSFER_COMPLETE.
- * - "status" will be one of the cvmx_usb_complete enumerations.
- * - "pipe_handle" is the handle to the pipe the transaction
- *   was originally submitted on.
- * - "submit_handle" is the handle returned by the original
- *   cvmx_usb_submit_* call.
- * - "bytes_transferred" is the number of bytes successfully
- *   transferred in the transaction. This will be zero on most
- *   error conditions.
- * - "user_data" is the void pointer originally passed along
- *   with the callback. Use this for any state information you
- *   need. For example, the Linux "urb" is stored in here in the
- *   Linux driver.
- *
- * In general your callback handler should use "status" and
- * "bytes_transferred" to tell the operating system the how the
- * transaction completed. Normally the pipe is not changed in
- * this callback.
- *
- * == Canceling transactions ==
- *
- * When a transaction is cancelled using cvmx_usb_cancel*(), the
- * actual length of time until the complete callback is called
- * can vary greatly. It may be called before cvmx_usb_cancel*()
- * returns, or it may be called a number of usb frames in the
- * future once the hardware frees the transaction. In either of
- * these cases, the complete handler will receive
- * CVMX_USB_COMPLETE_CANCEL.
- *
- * == Handling pipes ==
- *
- * USB "pipes" is a software construct created by this API to
- * enable the ordering of usb transactions to a device endpoint.
- * Octeon's underlying hardware doesn't have any concept
- * equivalent to "pipes". The hardware instead has eight
- * channels that can be used simultaneously to have up to eight
- * transaction in process at the same time. In order to maintain
- * ordering in a pipe, the transactions for a pipe will only be
- * active in one hardware channel at a time. From an API user's
- * perspective, this doesn't matter but it can be helpful to
- * keep this in mind when you are probing hardware while
- * debugging.
- *
- * Also keep in mind that usb transactions contain state
- * information about the previous transaction to the same
- * endpoint. Each transaction has a PID toggle that changes 0/1
- * between each sub packet. This is maintained in the pipe data
- * structures. For this reason, you generally cannot create and
- * destroy a pipe for every transaction. A sequence of
- * transaction to the same endpoint must use the same pipe.
- *
- * == Root Hub ==
- *
- * Some operating systems view the usb root port as a normal usb
- * hub. These systems attempt to control the root hub with
- * messages similar to the usb 2.0 spec for hub control and
- * status. For these systems it may be necessary to write
- * function to decode standard usb control messages into
- * equivalent cvmx-usb API calls.
- *
- * == Interrupts ==
- *
- * If you plan on using usb interrupts, cvmx_usb_poll() must be
- * called on every usb interrupt. It will read the usb state,
- * call any needed callbacks, and schedule transactions as
- * needed. Your device driver needs only to hookup an interrupt
- * handler and call cvmx_usb_poll(). Octeon's usb port 0 causes
- * CIU bit CIU_INT*_SUM0[USB] to be set (bit 56). For port 1,
- * CIU bit CIU_INT_SUM1[USB1] is set (bit 17). How these bits
- * are turned into interrupt numbers is operating system
- * specific. For Linux, there are the convenient defines
- * OCTEON_IRQ_USB0 and OCTEON_IRQ_USB1 for the IRQ numbers.
- *
- * If you aren't using interrupts, simple call cvmx_usb_poll()
- * in your main processing loop.
- */
-
-#ifndef __CVMX_USB_H__
-#define __CVMX_USB_H__
-
-/**
- * enum cvmx_usb_speed - the possible USB device speeds
- *
- * @CVMX_USB_SPEED_HIGH: Device is operation at 480Mbps
- * @CVMX_USB_SPEED_FULL: Device is operation at 12Mbps
- * @CVMX_USB_SPEED_LOW:  Device is operation at 1.5Mbps
- */
-enum cvmx_usb_speed {
-	CVMX_USB_SPEED_HIGH = 0,
-	CVMX_USB_SPEED_FULL = 1,
-	CVMX_USB_SPEED_LOW = 2,
-};
-
-/**
- * enum cvmx_usb_transfer - the possible USB transfer types
- *
- * @CVMX_USB_TRANSFER_CONTROL:	   USB transfer type control for hub and status
- *				   transfers
- * @CVMX_USB_TRANSFER_ISOCHRONOUS: USB transfer type isochronous for low
- *				   priority periodic transfers
- * @CVMX_USB_TRANSFER_BULK:	   USB transfer type bulk for large low priority
- *				   transfers
- * @CVMX_USB_TRANSFER_INTERRUPT:   USB transfer type interrupt for high priority
- *				   periodic transfers
- */
-enum cvmx_usb_transfer {
-	CVMX_USB_TRANSFER_CONTROL = 0,
-	CVMX_USB_TRANSFER_ISOCHRONOUS = 1,
-	CVMX_USB_TRANSFER_BULK = 2,
-	CVMX_USB_TRANSFER_INTERRUPT = 3,
-};
-
-/**
- * enum cvmx_usb_direction - the transfer directions
- *
- * @CVMX_USB_DIRECTION_OUT: Data is transferring from Octeon to the device/host
- * @CVMX_USB_DIRECTION_IN:  Data is transferring from the device/host to Octeon
- */
-enum cvmx_usb_direction {
-	CVMX_USB_DIRECTION_OUT,
-	CVMX_USB_DIRECTION_IN,
-};
-
-/**
- * enum cvmx_usb_complete - possible callback function status codes
- *
- * @CVMX_USB_COMPLETE_SUCCESS:	  The transaction / operation finished without
- *				  any errors
- * @CVMX_USB_COMPLETE_SHORT:	  FIXME: This is currently not implemented
- * @CVMX_USB_COMPLETE_CANCEL:	  The transaction was canceled while in flight by
- *				  a user call to cvmx_usb_cancel
- * @CVMX_USB_COMPLETE_ERROR:	  The transaction aborted with an unexpected
- *				  error status
- * @CVMX_USB_COMPLETE_STALL:	  The transaction received a USB STALL response
- *				  from the device
- * @CVMX_USB_COMPLETE_XACTERR:	  The transaction failed with an error from the
- *				  device even after a number of retries
- * @CVMX_USB_COMPLETE_DATATGLERR: The transaction failed with a data toggle
- *				  error even after a number of retries
- * @CVMX_USB_COMPLETE_BABBLEERR:  The transaction failed with a babble error
- * @CVMX_USB_COMPLETE_FRAMEERR:	  The transaction failed with a frame error
- *				  even after a number of retries
- */
-enum cvmx_usb_complete {
-	CVMX_USB_COMPLETE_SUCCESS,
-	CVMX_USB_COMPLETE_SHORT,
-	CVMX_USB_COMPLETE_CANCEL,
-	CVMX_USB_COMPLETE_ERROR,
-	CVMX_USB_COMPLETE_STALL,
-	CVMX_USB_COMPLETE_XACTERR,
-	CVMX_USB_COMPLETE_DATATGLERR,
-	CVMX_USB_COMPLETE_BABBLEERR,
-	CVMX_USB_COMPLETE_FRAMEERR,
-};
-
-/**
- * struct cvmx_usb_port_status - the USB port status information
- *
- * @port_enabled:	1 = Usb port is enabled, 0 = disabled
- * @port_over_current:	1 = Over current detected, 0 = Over current not
- *			detected. Octeon doesn't support over current detection.
- * @port_powered:	1 = Port power is being supplied to the device, 0 =
- *			power is off. Octeon doesn't support turning port power
- *			off.
- * @port_speed:		Current port speed.
- * @connected:		1 = A device is connected to the port, 0 = No device is
- *			connected.
- * @connect_change:	1 = Device connected state changed since the last set
- *			status call.
- */
-struct cvmx_usb_port_status {
-	uint32_t reserved		: 25;
-	uint32_t port_enabled		: 1;
-	uint32_t port_over_current	: 1;
-	uint32_t port_powered		: 1;
-	enum cvmx_usb_speed port_speed	: 2;
-	uint32_t connected		: 1;
-	uint32_t connect_change		: 1;
-};
-
-/**
- * union cvmx_usb_control_header - the structure of a Control packet header
- *
- * @s.request_type:	Bit 7 tells the direction: 1=IN, 0=OUT
- * @s.request		The standard usb request to make
- * @s.value		Value parameter for the request in little endian format
- * @s.index		Index for the request in little endian format
- * @s.length		Length of the data associated with this request in
- *			little endian format
- */
-union cvmx_usb_control_header {
-	uint64_t u64;
-	struct {
-		uint64_t request_type   : 8;
-		uint64_t request        : 8;
-		uint64_t value          : 16;
-		uint64_t index          : 16;
-		uint64_t length         : 16;
-	} s;
-};
-
-/**
- * struct cvmx_usb_iso_packet - descriptor for Isochronous packets
- *
- * @offset:	This is the offset in bytes into the main buffer where this data
- *		is stored.
- * @length:	This is the length in bytes of the data.
- * @status:	This is the status of this individual packet transfer.
- */
-struct cvmx_usb_iso_packet {
-	int offset;
-	int length;
-	enum cvmx_usb_complete status;
-};
-
-/**
- * enum cvmx_usb_callback - possible callback reasons for the USB API
- *
- * @CVMX_USB_CALLBACK_TRANSFER_COMPLETE: A callback of this type is called when
- *					 a submitted transfer completes. The
- *					 completion callback will be called even
- *					 if the transfer fails or is canceled.
- *					 The status parameter will contain
- *					 details of why he callback was called.
- * @CVMX_USB_CALLBACK_PORT_CHANGED:	 The status of the port changed. For
- *					 example, someone may have plugged a
- *					 device in. The status parameter
- *					 contains CVMX_USB_COMPLETE_SUCCESS. Use
- *					 cvmx_usb_get_status() to get the new
- *					 port status.
- * @__CVMX_USB_CALLBACK_END:		 Do not use. Used internally for array
- *					 bounds.
- */
-enum cvmx_usb_callback {
-	CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
-	CVMX_USB_CALLBACK_PORT_CHANGED,
-	__CVMX_USB_CALLBACK_END
-};
-
-/**
- * USB state internal data. The contents of this structure
- * may change in future SDKs. No data in it should be referenced
- * by user's of this API.
- */
-struct cvmx_usb_state {
-	char data[65536];
-};
-
-/**
- * USB callback functions are always of the following type.
- * The parameters are as follows:
- *      - state = USB device state populated by
- *        cvmx_usb_initialize().
- *      - reason = The enum cvmx_usb_callback used to register
- *        the callback.
- *      - status = The enum cvmx_usb_complete representing the
- *        status code of a transaction.
- *      - pipe_handle = The Pipe that caused this callback, or
- *        -1 if this callback wasn't associated with a pipe.
- *      - submit_handle = Transfer submit handle causing this
- *        callback, or -1 if this callback wasn't associated
- *        with a transfer.
- *      - Actual number of bytes transfer.
- *      - user_data = The user pointer supplied to the
- *        function cvmx_usb_submit() or
- *        cvmx_usb_register_callback() */
-typedef void (*cvmx_usb_callback_func_t)(struct cvmx_usb_state *state,
-                                         enum cvmx_usb_callback reason,
-                                         enum cvmx_usb_complete status,
-                                         int pipe_handle, int submit_handle,
-                                         int bytes_transferred, void *user_data);
-
-/**
- * enum cvmx_usb_initialize_flags - flags to pass the initialization function
- *
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI:    The USB port uses a 12MHz crystal
- *					      as clock source at USB_XO and
- *					      USB_XI.
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND:   The USB port uses 12/24/48MHz 2.5V
- *					      board clock source at USB_XO.
- *					      USB_XI should be tied to GND.
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO:     Automatically determine clock type
- *					      based on function in
- *					      cvmx-helper-board.c.
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK: Mask for clock speed field
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:    Speed of reference clock or
- *					      crystal
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:    Speed of reference clock
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:    Speed of reference clock
- * @CVMX_USB_INITIALIZE_FLAGS_NO_DMA:	      Disable DMA and used polled IO for
- *					      data transfer use for the USB
- */
-enum cvmx_usb_initialize_flags {
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI		= 1 << 0,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND		= 1 << 1,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO		= 0,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK	= 3 << 3,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ		= 1 << 3,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ		= 2 << 3,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ		= 3 << 3,
-	/* Bits 3-4 used to encode the clock frequency */
-	CVMX_USB_INITIALIZE_FLAGS_NO_DMA		= 1 << 5,
-};
-
-/**
- * enum cvmx_usb_pipe_flags - flags for passing when a pipe is created.
- *			      Currently no flags need to be passed.
- *
- * @__CVMX_USB_PIPE_FLAGS_OPEN:	     Used internally to determine if a pipe is
- *				     open. Do not use.
- * @__CVMX_USB_PIPE_FLAGS_SCHEDULED: Used internally to determine if a pipe is
- *				     actively using hardware. Do not use.
- * @__CVMX_USB_PIPE_FLAGS_NEED_PING: Used internally to determine if a high
- *				     speed pipe is in the ping state. Do not
- *				     use.
- */
-enum cvmx_usb_pipe_flags {
-	__CVMX_USB_PIPE_FLAGS_OPEN	= 1 << 16,
-	__CVMX_USB_PIPE_FLAGS_SCHEDULED	= 1 << 17,
-	__CVMX_USB_PIPE_FLAGS_NEED_PING	= 1 << 18,
-};
-
-extern int cvmx_usb_get_num_ports(void);
-extern int cvmx_usb_initialize(struct cvmx_usb_state *state, int usb_port_number,
-			       enum cvmx_usb_initialize_flags flags);
-extern int cvmx_usb_shutdown(struct cvmx_usb_state *state);
-extern int cvmx_usb_enable(struct cvmx_usb_state *state);
-extern int cvmx_usb_disable(struct cvmx_usb_state *state);
-extern struct cvmx_usb_port_status cvmx_usb_get_status(struct cvmx_usb_state *state);
-extern void cvmx_usb_set_status(struct cvmx_usb_state *state, struct cvmx_usb_port_status port_status);
-extern int cvmx_usb_open_pipe(struct cvmx_usb_state *state,
-                              enum cvmx_usb_pipe_flags flags,
-                              int device_addr, int endpoint_num,
-                              enum cvmx_usb_speed device_speed, int max_packet,
-                              enum cvmx_usb_transfer transfer_type,
-                              enum cvmx_usb_direction transfer_dir, int interval,
-                              int multi_count, int hub_device_addr,
-                              int hub_port);
-extern int cvmx_usb_submit_bulk(struct cvmx_usb_state *state, int pipe_handle,
-                                uint64_t buffer, int buffer_length,
-                                cvmx_usb_callback_func_t callback,
-                                void *user_data);
-extern int cvmx_usb_submit_interrupt(struct cvmx_usb_state *state, int pipe_handle,
-                                     uint64_t buffer, int buffer_length,
-                                     cvmx_usb_callback_func_t callback,
-                                     void *user_data);
-extern int cvmx_usb_submit_control(struct cvmx_usb_state *state, int pipe_handle,
-                                   uint64_t control_header,
-                                   uint64_t buffer, int buffer_length,
-                                   cvmx_usb_callback_func_t callback,
-                                   void *user_data);
-
-/**
- * enum cvmx_usb_isochronous_flags - flags to pass the
- *				     cvmx_usb_submit_isochronous() function.
- *
- * @CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT: Do not return an error if a transfer
- *					    is less than the maximum packet size
- *					    of the device.
- * @CVMX_USB_ISOCHRONOUS_FLAGS_ASAP:	    Schedule the transaction as soon as
- *					    possible.
- */
-enum cvmx_usb_isochronous_flags {
-	CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT	= 1 << 0,
-	CVMX_USB_ISOCHRONOUS_FLAGS_ASAP		= 1 << 1,
-};
-
-extern int cvmx_usb_submit_isochronous(struct cvmx_usb_state *state, int pipe_handle,
-                                       int start_frame, int flags,
-                                       int number_packets,
-                                       struct cvmx_usb_iso_packet packets[],
-                                       uint64_t buffer, int buffer_length,
-                                       cvmx_usb_callback_func_t callback,
-                                       void *user_data);
-extern int cvmx_usb_cancel(struct cvmx_usb_state *state, int pipe_handle,
-			   int submit_handle);
-extern int cvmx_usb_cancel_all(struct cvmx_usb_state *state, int pipe_handle);
-extern int cvmx_usb_close_pipe(struct cvmx_usb_state *state, int pipe_handle);
-extern int cvmx_usb_register_callback(struct cvmx_usb_state *state,
-				      enum cvmx_usb_callback reason,
-				      cvmx_usb_callback_func_t callback,
-				      void *user_data);
-extern int cvmx_usb_get_frame_number(struct cvmx_usb_state *state);
-extern int cvmx_usb_poll(struct cvmx_usb_state *state);
-
-#endif  /* __CVMX_USB_H__ */
diff --git a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h b/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
deleted file mode 100644
index e06aafa..0000000
--- a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
+++ /dev/null
@@ -1,885 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export
- * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
- * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * cvmx-usbnx-defs.h
- *
- * Configuration and status register (CSR) type definitions for
- * Octeon usbnx.
- *
- */
-#ifndef __CVMX_USBNX_TYPEDEFS_H__
-#define __CVMX_USBNX_TYPEDEFS_H__
-
-#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
-#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
-
-#define CVMX_USBNXREG1(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
-#define CVMX_USBNXREG2(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
-
-#define CVMX_USBNX_CLK_CTL(bid)		CVMX_USBNXREG1(0x10, bid)
-#define CVMX_USBNX_DMA0_INB_CHN0(bid)	CVMX_USBNXREG2(0x818, bid)
-#define CVMX_USBNX_DMA0_OUTB_CHN0(bid)	CVMX_USBNXREG2(0x858, bid)
-#define CVMX_USBNX_USBP_CTL_STATUS(bid)	CVMX_USBNXREG1(0x18, bid)
-
-/**
- * cvmx_usbn#_clk_ctl
- *
- * USBN_CLK_CTL = USBN's Clock Control
- *
- * This register is used to control the frequency of the hclk and the
- * hreset and phy_rst signals.
- */
-union cvmx_usbnx_clk_ctl {
-	uint64_t u64;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_s
-	 * @divide2: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk.
-	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
-	 *	be zero because it is not implemented, so the maximum
-	 *	ratio of eclk/hclk is currently 16.
-	 *	The actual divide number for hclk is:
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_x_on: Force USB-PHY on during suspend.
-	 *	'1' USB-PHY XO block is powered-down during
-	 *	suspend.
-	 *	'0' USB-PHY XO block is powered-up during
-	 *	suspend.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz (reserved when a crystal is used)
-	 *	'01': 24 MHz (reserved when a crystal is used)
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 *	NOTE: if a crystal is used as a reference clock,
-	 *	this field must be set to 12 MHz.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated. SEE DIVIDE
-	 *	field of this register.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The frequency of 'hclk' used by the USB subsystem
-	 *	is the eclk frequency divided by the value of
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
-	 *	DIVIDE2 of this register.
-	 *	The hclk frequency should be less than 125Mhz.
-	 *	After writing a value to this field the SW should
-	 *	read the field for the value written.
-	 *	The ENABLE field of this register should not be set
-	 *	until AFTER this field is set and then read.
-	 */
-	struct cvmx_usbnx_clk_ctl_s {
-		uint64_t reserved_20_63	: 44;
-		uint64_t divide2	: 2;
-		uint64_t hclk_rst	: 1;
-		uint64_t p_x_on		: 1;
-		uint64_t reserved_14_15	: 2;
-		uint64_t p_com_on	: 1;
-		uint64_t p_c_sel	: 2;
-		uint64_t cdiv_byp	: 1;
-		uint64_t sd_mode	: 2;
-		uint64_t s_bist		: 1;
-		uint64_t por		: 1;
-		uint64_t enable		: 1;
-		uint64_t prst		: 1;
-		uint64_t hrst		: 1;
-		uint64_t divide		: 3;
-	} s;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_cn30xx
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_x_on: Force USB-PHY on during suspend.
-	 *	'1' USB-PHY XO block is powered-down during
-	 *	suspend.
-	 *	'0' USB-PHY XO block is powered-up during
-	 *	suspend.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_rclk: Phy refrence clock enable.
-	 *	'1' The PHY PLL uses the XO block output as a
-	 *	reference.
-	 *	'0' Reserved.
-	 * @p_xenbn: Phy external clock enable.
-	 *	'1' The XO block uses the clock from a crystal.
-	 *	'0' The XO block uses an external clock supplied
-	 *	on the XO pin. USB_XI should be tied to
-	 *	ground for this usage.
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz
-	 *	'01': 24 MHz
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk. The eclk will be divided by the
-	 *	value of this field +1 to determine the hclk
-	 *	frequency. (Also see HRST of this register).
-	 *	The hclk frequency must be less than 125 MHz.
-	 */
-	struct cvmx_usbnx_clk_ctl_cn30xx {
-		uint64_t reserved_18_63	: 46;
-		uint64_t hclk_rst	: 1;
-		uint64_t p_x_on		: 1;
-		uint64_t p_rclk		: 1;
-		uint64_t p_xenbn	: 1;
-		uint64_t p_com_on	: 1;
-		uint64_t p_c_sel	: 2;
-		uint64_t cdiv_byp	: 1;
-		uint64_t sd_mode	: 2;
-		uint64_t s_bist		: 1;
-		uint64_t por		: 1;
-		uint64_t enable		: 1;
-		uint64_t prst		: 1;
-		uint64_t hrst		: 1;
-		uint64_t divide		: 3;
-	} cn30xx;
-	struct cvmx_usbnx_clk_ctl_cn30xx cn31xx;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_cn50xx
-	 * @divide2: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk.
-	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
-	 *	be zero because it is not implemented, so the maximum
-	 *	ratio of eclk/hclk is currently 16.
-	 *	The actual divide number for hclk is:
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_rtype: PHY reference clock type
-	 *	'0' The USB-PHY uses a 12MHz crystal as a clock
-	 *	source at the USB_XO and USB_XI pins
-	 *	'1' Reserved
-	 *	'2' The USB_PHY uses 12/24/48MHz 2.5V board clock
-	 *	at the USB_XO pin. USB_XI should be tied to
-	 *	ground in this case.
-	 *	'3' Reserved
-	 *	(bit 14 was P_XENBN on 3xxx)
-	 *	(bit 15 was P_RCLK on 3xxx)
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz (reserved when a crystal is used)
-	 *	'01': 24 MHz (reserved when a crystal is used)
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 *	NOTE: if a crystal is used as a reference clock,
-	 *	this field must be set to 12 MHz.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated. SEE DIVIDE
-	 *	field of this register.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The frequency of 'hclk' used by the USB subsystem
-	 *	is the eclk frequency divided by the value of
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
-	 *	DIVIDE2 of this register.
-	 *	The hclk frequency should be less than 125Mhz.
-	 *	After writing a value to this field the SW should
-	 *	read the field for the value written.
-	 *	The ENABLE field of this register should not be set
-	 *	until AFTER this field is set and then read.
-	 */
-	struct cvmx_usbnx_clk_ctl_cn50xx {
-		uint64_t reserved_20_63	: 44;
-		uint64_t divide2	: 2;
-		uint64_t hclk_rst	: 1;
-		uint64_t reserved_16_16 : 1;
-		uint64_t p_rtype	: 2;
-		uint64_t p_com_on	: 1;
-		uint64_t p_c_sel	: 2;
-		uint64_t cdiv_byp	: 1;
-		uint64_t sd_mode	: 2;
-		uint64_t s_bist		: 1;
-		uint64_t por		: 1;
-		uint64_t enable		: 1;
-		uint64_t prst		: 1;
-		uint64_t hrst		: 1;
-		uint64_t divide		: 3;
-	} cn50xx;
-	struct cvmx_usbnx_clk_ctl_cn50xx cn52xx;
-	struct cvmx_usbnx_clk_ctl_cn50xx cn56xx;
-};
-
-/**
- * cvmx_usbn#_usbp_ctl_status
- *
- * USBN_USBP_CTL_STATUS = USBP Control And Status Register
- *
- * Contains general control and status information for the USBN block.
- */
-union cvmx_usbnx_usbp_ctl_status {
-	uint64_t u64;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_s
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
-	 *	Normally should be set to zero.
-	 *	When customers have no intent to use USB PHY
-	 *	interface, they should:
-	 *	- still provide 3.3V to USB_VDD33, and
-	 *	- tie USB_REXT to 3.3V supply, and
-	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tuning: Transmitter Tuning for High-Speed Operation.
-	 *	Tunes the current supply and rise/fall output
-	 *	times for high-speed operation.
-	 *	[20:19] == 11: Current supply increased
-	 *	approximately 9%
-	 *	[20:19] == 10: Current supply increased
-	 *	approximately 4.5%
-	 *	[20:19] == 01: Design default.
-	 *	[20:19] == 00: Current supply decreased
-	 *	approximately 4.5%
-	 *	[22:21] == 11: Rise and fall times are increased.
-	 *	[22:21] == 10: Design default.
-	 *	[22:21] == 01: Rise and fall times are decreased.
-	 *	[22:21] == 00: Rise and fall times are decreased
-	 *	further as compared to the 01 setting.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_s {
-		uint64_t txrisetune		: 1;
-		uint64_t txvreftune		: 4;
-		uint64_t txfslstune		: 4;
-		uint64_t txhsxvtune		: 2;
-		uint64_t sqrxtune		: 3;
-		uint64_t compdistune		: 3;
-		uint64_t otgtune		: 3;
-		uint64_t otgdisable		: 1;
-		uint64_t portreset		: 1;
-		uint64_t drvvbus		: 1;
-		uint64_t lsbist			: 1;
-		uint64_t fsbist			: 1;
-		uint64_t hsbist			: 1;
-		uint64_t bist_done		: 1;
-		uint64_t bist_err		: 1;
-		uint64_t tdata_out		: 4;
-		uint64_t siddq			: 1;
-		uint64_t txpreemphasistune	: 1;
-		uint64_t dma_bmode		: 1;
-		uint64_t usbc_end		: 1;
-		uint64_t usbp_bist		: 1;
-		uint64_t tclk			: 1;
-		uint64_t dp_pulld		: 1;
-		uint64_t dm_pulld		: 1;
-		uint64_t hst_mode		: 1;
-		uint64_t tuning			: 4;
-		uint64_t tx_bs_enh		: 1;
-		uint64_t tx_bs_en		: 1;
-		uint64_t loop_enb		: 1;
-		uint64_t vtest_enb		: 1;
-		uint64_t bist_enb		: 1;
-		uint64_t tdata_sel		: 1;
-		uint64_t taddr_in		: 4;
-		uint64_t tdata_in		: 8;
-		uint64_t ate_reset		: 1;
-	} s;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_cn30xx
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tuning: Transmitter Tuning for High-Speed Operation.
-	 *	Tunes the current supply and rise/fall output
-	 *	times for high-speed operation.
-	 *	[20:19] == 11: Current supply increased
-	 *	approximately 9%
-	 *	[20:19] == 10: Current supply increased
-	 *	approximately 4.5%
-	 *	[20:19] == 01: Design default.
-	 *	[20:19] == 00: Current supply decreased
-	 *	approximately 4.5%
-	 *	[22:21] == 11: Rise and fall times are increased.
-	 *	[22:21] == 10: Design default.
-	 *	[22:21] == 01: Rise and fall times are decreased.
-	 *	[22:21] == 00: Rise and fall times are decreased
-	 *	further as compared to the 01 setting.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_cn30xx {
-		uint64_t reserved_38_63	: 26;
-		uint64_t bist_done	: 1;
-		uint64_t bist_err	: 1;
-		uint64_t tdata_out	: 4;
-		uint64_t reserved_30_31	: 2;
-		uint64_t dma_bmode	: 1;
-		uint64_t usbc_end	: 1;
-		uint64_t usbp_bist	: 1;
-		uint64_t tclk		: 1;
-		uint64_t dp_pulld	: 1;
-		uint64_t dm_pulld	: 1;
-		uint64_t hst_mode	: 1;
-		uint64_t tuning		: 4;
-		uint64_t tx_bs_enh	: 1;
-		uint64_t tx_bs_en	: 1;
-		uint64_t loop_enb	: 1;
-		uint64_t vtest_enb	: 1;
-		uint64_t bist_enb	: 1;
-		uint64_t tdata_sel	: 1;
-		uint64_t taddr_in	: 4;
-		uint64_t tdata_in	: 8;
-		uint64_t ate_reset	: 1;
-	} cn30xx;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_cn50xx
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_cn50xx {
-		uint64_t txrisetune		: 1;
-		uint64_t txvreftune		: 4;
-		uint64_t txfslstune		: 4;
-		uint64_t txhsxvtune		: 2;
-		uint64_t sqrxtune		: 3;
-		uint64_t compdistune		: 3;
-		uint64_t otgtune		: 3;
-		uint64_t otgdisable		: 1;
-		uint64_t portreset		: 1;
-		uint64_t drvvbus		: 1;
-		uint64_t lsbist			: 1;
-		uint64_t fsbist			: 1;
-		uint64_t hsbist			: 1;
-		uint64_t bist_done		: 1;
-		uint64_t bist_err		: 1;
-		uint64_t tdata_out		: 4;
-		uint64_t reserved_31_31		: 1;
-		uint64_t txpreemphasistune	: 1;
-		uint64_t dma_bmode		: 1;
-		uint64_t usbc_end		: 1;
-		uint64_t usbp_bist		: 1;
-		uint64_t tclk			: 1;
-		uint64_t dp_pulld		: 1;
-		uint64_t dm_pulld		: 1;
-		uint64_t hst_mode		: 1;
-		uint64_t reserved_19_22		: 4;
-		uint64_t tx_bs_enh		: 1;
-		uint64_t tx_bs_en		: 1;
-		uint64_t loop_enb		: 1;
-		uint64_t vtest_enb		: 1;
-		uint64_t bist_enb		: 1;
-		uint64_t tdata_sel		: 1;
-		uint64_t taddr_in		: 4;
-		uint64_t tdata_in		: 8;
-		uint64_t ate_reset		: 1;
-	} cn50xx;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_cn52xx
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
-	 *	Normally should be set to zero.
-	 *	When customers have no intent to use USB PHY
-	 *	interface, they should:
-	 *	- still provide 3.3V to USB_VDD33, and
-	 *	- tie USB_REXT to 3.3V supply, and
-	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_cn52xx {
-		uint64_t txrisetune		: 1;
-		uint64_t txvreftune		: 4;
-		uint64_t txfslstune		: 4;
-		uint64_t txhsxvtune		: 2;
-		uint64_t sqrxtune		: 3;
-		uint64_t compdistune		: 3;
-		uint64_t otgtune		: 3;
-		uint64_t otgdisable		: 1;
-		uint64_t portreset		: 1;
-		uint64_t drvvbus		: 1;
-		uint64_t lsbist			: 1;
-		uint64_t fsbist			: 1;
-		uint64_t hsbist			: 1;
-		uint64_t bist_done		: 1;
-		uint64_t bist_err		: 1;
-		uint64_t tdata_out		: 4;
-		uint64_t siddq			: 1;
-		uint64_t txpreemphasistune	: 1;
-		uint64_t dma_bmode		: 1;
-		uint64_t usbc_end		: 1;
-		uint64_t usbp_bist		: 1;
-		uint64_t tclk			: 1;
-		uint64_t dp_pulld		: 1;
-		uint64_t dm_pulld		: 1;
-		uint64_t hst_mode		: 1;
-		uint64_t reserved_19_22		: 4;
-		uint64_t tx_bs_enh		: 1;
-		uint64_t tx_bs_en		: 1;
-		uint64_t loop_enb		: 1;
-		uint64_t vtest_enb		: 1;
-		uint64_t bist_enb		: 1;
-		uint64_t tdata_sel		: 1;
-		uint64_t taddr_in		: 4;
-		uint64_t tdata_in		: 8;
-		uint64_t ate_reset		: 1;
-	} cn52xx;
-};
-
-#endif
diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
index 5dbbd14..d118952 100644
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -4,6 +4,44 @@
  * for more details.
  *
  * Copyright (C) 2008 Cavium Networks
+ *
+ * Some parts of the code were originally released under BSD license:
+ *
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *
+ *   * Redistributions in binary form must reproduce the above
+ *     copyright notice, this list of conditions and the following
+ *     disclaimer in the documentation and/or other materials provided
+ *     with the distribution.
+ *
+ *   * Neither the name of Cavium Networks nor the names of
+ *     its contributors may be used to endorse or promote products
+ *     derived from this software without specific prior written
+ *     permission.
+ *
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+ *
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
+ * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -17,13 +55,379 @@
 #include <linux/delay.h>
 
 #include <asm/octeon/cvmx.h>
-#include "cvmx-usb.h"
 #include <asm/octeon/cvmx-iob-defs.h>
 
 #include <linux/usb/hcd.h>
 
 #include <linux/err.h>
 
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-sysinfo.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#include "octeon-hcd.h"
+
+/**
+ * enum cvmx_usb_speed - the possible USB device speeds
+ *
+ * @CVMX_USB_SPEED_HIGH: Device is operation at 480Mbps
+ * @CVMX_USB_SPEED_FULL: Device is operation at 12Mbps
+ * @CVMX_USB_SPEED_LOW:  Device is operation at 1.5Mbps
+ */
+enum cvmx_usb_speed {
+	CVMX_USB_SPEED_HIGH = 0,
+	CVMX_USB_SPEED_FULL = 1,
+	CVMX_USB_SPEED_LOW = 2,
+};
+
+/**
+ * enum cvmx_usb_transfer - the possible USB transfer types
+ *
+ * @CVMX_USB_TRANSFER_CONTROL:	   USB transfer type control for hub and status
+ *				   transfers
+ * @CVMX_USB_TRANSFER_ISOCHRONOUS: USB transfer type isochronous for low
+ *				   priority periodic transfers
+ * @CVMX_USB_TRANSFER_BULK:	   USB transfer type bulk for large low priority
+ *				   transfers
+ * @CVMX_USB_TRANSFER_INTERRUPT:   USB transfer type interrupt for high priority
+ *				   periodic transfers
+ */
+enum cvmx_usb_transfer {
+	CVMX_USB_TRANSFER_CONTROL = 0,
+	CVMX_USB_TRANSFER_ISOCHRONOUS = 1,
+	CVMX_USB_TRANSFER_BULK = 2,
+	CVMX_USB_TRANSFER_INTERRUPT = 3,
+};
+
+/**
+ * enum cvmx_usb_direction - the transfer directions
+ *
+ * @CVMX_USB_DIRECTION_OUT: Data is transferring from Octeon to the device/host
+ * @CVMX_USB_DIRECTION_IN:  Data is transferring from the device/host to Octeon
+ */
+enum cvmx_usb_direction {
+	CVMX_USB_DIRECTION_OUT,
+	CVMX_USB_DIRECTION_IN,
+};
+
+/**
+ * enum cvmx_usb_complete - possible callback function status codes
+ *
+ * @CVMX_USB_COMPLETE_SUCCESS:	  The transaction / operation finished without
+ *				  any errors
+ * @CVMX_USB_COMPLETE_SHORT:	  FIXME: This is currently not implemented
+ * @CVMX_USB_COMPLETE_CANCEL:	  The transaction was canceled while in flight
+ *				  by a user call to cvmx_usb_cancel
+ * @CVMX_USB_COMPLETE_ERROR:	  The transaction aborted with an unexpected
+ *				  error status
+ * @CVMX_USB_COMPLETE_STALL:	  The transaction received a USB STALL response
+ *				  from the device
+ * @CVMX_USB_COMPLETE_XACTERR:	  The transaction failed with an error from the
+ *				  device even after a number of retries
+ * @CVMX_USB_COMPLETE_DATATGLERR: The transaction failed with a data toggle
+ *				  error even after a number of retries
+ * @CVMX_USB_COMPLETE_BABBLEERR:  The transaction failed with a babble error
+ * @CVMX_USB_COMPLETE_FRAMEERR:	  The transaction failed with a frame error
+ *				  even after a number of retries
+ */
+enum cvmx_usb_complete {
+	CVMX_USB_COMPLETE_SUCCESS,
+	CVMX_USB_COMPLETE_SHORT,
+	CVMX_USB_COMPLETE_CANCEL,
+	CVMX_USB_COMPLETE_ERROR,
+	CVMX_USB_COMPLETE_STALL,
+	CVMX_USB_COMPLETE_XACTERR,
+	CVMX_USB_COMPLETE_DATATGLERR,
+	CVMX_USB_COMPLETE_BABBLEERR,
+	CVMX_USB_COMPLETE_FRAMEERR,
+};
+
+/**
+ * struct cvmx_usb_port_status - the USB port status information
+ *
+ * @port_enabled:	1 = Usb port is enabled, 0 = disabled
+ * @port_over_current:	1 = Over current detected, 0 = Over current not
+ *			detected. Octeon doesn't support over current detection.
+ * @port_powered:	1 = Port power is being supplied to the device, 0 =
+ *			power is off. Octeon doesn't support turning port power
+ *			off.
+ * @port_speed:		Current port speed.
+ * @connected:		1 = A device is connected to the port, 0 = No device is
+ *			connected.
+ * @connect_change:	1 = Device connected state changed since the last set
+ *			status call.
+ */
+struct cvmx_usb_port_status {
+	uint32_t reserved		: 25;
+	uint32_t port_enabled		: 1;
+	uint32_t port_over_current	: 1;
+	uint32_t port_powered		: 1;
+	enum cvmx_usb_speed port_speed	: 2;
+	uint32_t connected		: 1;
+	uint32_t connect_change		: 1;
+};
+
+/**
+ * union cvmx_usb_control_header - the structure of a Control packet header
+ *
+ * @s.request_type:	Bit 7 tells the direction: 1=IN, 0=OUT
+ * @s.request		The standard usb request to make
+ * @s.value		Value parameter for the request in little endian format
+ * @s.index		Index for the request in little endian format
+ * @s.length		Length of the data associated with this request in
+ *			little endian format
+ */
+union cvmx_usb_control_header {
+	uint64_t u64;
+	struct {
+		uint64_t request_type   : 8;
+		uint64_t request        : 8;
+		uint64_t value          : 16;
+		uint64_t index          : 16;
+		uint64_t length         : 16;
+	} s;
+};
+
+/**
+ * struct cvmx_usb_iso_packet - descriptor for Isochronous packets
+ *
+ * @offset:	This is the offset in bytes into the main buffer where this data
+ *		is stored.
+ * @length:	This is the length in bytes of the data.
+ * @status:	This is the status of this individual packet transfer.
+ */
+struct cvmx_usb_iso_packet {
+	int offset;
+	int length;
+	enum cvmx_usb_complete status;
+};
+
+/**
+ * enum cvmx_usb_initialize_flags - flags used by the initialization function
+ *
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI:    The USB port uses a 12MHz crystal
+ *					      as clock source at USB_XO and
+ *					      USB_XI.
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND:   The USB port uses 12/24/48MHz 2.5V
+ *					      board clock source at USB_XO.
+ *					      USB_XI should be tied to GND.
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK: Mask for clock speed field
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:    Speed of reference clock or
+ *					      crystal
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:    Speed of reference clock
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:    Speed of reference clock
+ * @CVMX_USB_INITIALIZE_FLAGS_NO_DMA:	      Disable DMA and used polled IO for
+ *					      data transfer use for the USB
+ */
+enum cvmx_usb_initialize_flags {
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI		= 1 << 0,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND		= 1 << 1,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK	= 3 << 3,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ		= 1 << 3,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ		= 2 << 3,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ		= 3 << 3,
+	/* Bits 3-4 used to encode the clock frequency */
+	CVMX_USB_INITIALIZE_FLAGS_NO_DMA		= 1 << 5,
+};
+
+/**
+ * enum cvmx_usb_pipe_flags - internal flags for a pipe.
+ *
+ * @__CVMX_USB_PIPE_FLAGS_SCHEDULED: Used internally to determine if a pipe is
+ *				     actively using hardware. Do not use.
+ * @__CVMX_USB_PIPE_FLAGS_NEED_PING: Used internally to determine if a high
+ *				     speed pipe is in the ping state. Do not
+ *				     use.
+ */
+enum cvmx_usb_pipe_flags {
+	__CVMX_USB_PIPE_FLAGS_SCHEDULED	= 1 << 17,
+	__CVMX_USB_PIPE_FLAGS_NEED_PING	= 1 << 18,
+};
+
+/* Normal prefetch that use the pref instruction. */
+#define CVMX_PREFETCH(address, offset) asm volatile ("pref %[type], %[off](%[rbase])" : : [rbase] "d" (address), [off] "I" (offset), [type] "n" (0))
+
+/* Maximum number of times to retry failed transactions */
+#define MAX_RETRIES		3
+
+/* Maximum number of hardware channels supported by the USB block */
+#define MAX_CHANNELS		8
+
+/* The highest valid USB device address */
+#define MAX_USB_ADDRESS		127
+
+/* The highest valid USB endpoint number */
+#define MAX_USB_ENDPOINT	15
+
+/* The highest valid port number on a hub */
+#define MAX_USB_HUB_PORT	15
+
+/*
+ * The low level hardware can transfer a maximum of this number of bytes in each
+ * transfer. The field is 19 bits wide
+ */
+#define MAX_TRANSFER_BYTES	((1<<19)-1)
+
+/*
+ * The low level hardware can transfer a maximum of this number of packets in
+ * each transfer. The field is 10 bits wide
+ */
+#define MAX_TRANSFER_PACKETS	((1<<10)-1)
+
+enum {
+	USB_CLOCK_TYPE_REF_12,
+	USB_CLOCK_TYPE_REF_24,
+	USB_CLOCK_TYPE_REF_48,
+	USB_CLOCK_TYPE_CRYSTAL_12,
+};
+
+/**
+ * Logical transactions may take numerous low level
+ * transactions, especially when splits are concerned. This
+ * enum represents all of the possible stages a transaction can
+ * be in. Note that split completes are always even. This is so
+ * the NAK handler can backup to the previous low level
+ * transaction with a simple clearing of bit 0.
+ */
+enum cvmx_usb_stage {
+	CVMX_USB_STAGE_NON_CONTROL,
+	CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE,
+	CVMX_USB_STAGE_SETUP,
+	CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE,
+	CVMX_USB_STAGE_DATA,
+	CVMX_USB_STAGE_DATA_SPLIT_COMPLETE,
+	CVMX_USB_STAGE_STATUS,
+	CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE,
+};
+
+/**
+ * struct cvmx_usb_transaction - describes each pending USB transaction
+ *				 regardless of type. These are linked together
+ *				 to form a list of pending requests for a pipe.
+ *
+ * @node:		List node for transactions in the pipe.
+ * @type:		Type of transaction, duplicated of the pipe.
+ * @flags:		State flags for this transaction.
+ * @buffer:		User's physical buffer address to read/write.
+ * @buffer_length:	Size of the user's buffer in bytes.
+ * @control_header:	For control transactions, physical address of the 8
+ *			byte standard header.
+ * @iso_start_frame:	For ISO transactions, the starting frame number.
+ * @iso_number_packets:	For ISO transactions, the number of packets in the
+ *			request.
+ * @iso_packets:	For ISO transactions, the sub packets in the request.
+ * @actual_bytes:	Actual bytes transfer for this transaction.
+ * @stage:		For control transactions, the current stage.
+ * @urb:		URB.
+ */
+struct cvmx_usb_transaction {
+	struct list_head node;
+	enum cvmx_usb_transfer type;
+	uint64_t buffer;
+	int buffer_length;
+	uint64_t control_header;
+	int iso_start_frame;
+	int iso_number_packets;
+	struct cvmx_usb_iso_packet *iso_packets;
+	int xfersize;
+	int pktcnt;
+	int retries;
+	int actual_bytes;
+	enum cvmx_usb_stage stage;
+	struct urb *urb;
+};
+
+/**
+ * struct cvmx_usb_pipe - a pipe represents a virtual connection between Octeon
+ *			  and some USB device. It contains a list of pending
+ *			  request to the device.
+ *
+ * @node:		List node for pipe list
+ * @next:		Pipe after this one in the list
+ * @transactions:	List of pending transactions
+ * @interval:		For periodic pipes, the interval between packets in
+ *			frames
+ * @next_tx_frame:	The next frame this pipe is allowed to transmit on
+ * @flags:		State flags for this pipe
+ * @device_speed:	Speed of device connected to this pipe
+ * @transfer_type:	Type of transaction supported by this pipe
+ * @transfer_dir:	IN or OUT. Ignored for Control
+ * @multi_count:	Max packet in a row for the device
+ * @max_packet:		The device's maximum packet size in bytes
+ * @device_addr:	USB device address at other end of pipe
+ * @endpoint_num:	USB endpoint number at other end of pipe
+ * @hub_device_addr:	Hub address this device is connected to
+ * @hub_port:		Hub port this device is connected to
+ * @pid_toggle:		This toggles between 0/1 on every packet send to track
+ *			the data pid needed
+ * @channel:		Hardware DMA channel for this pipe
+ * @split_sc_frame:	The low order bits of the frame number the split
+ *			complete should be sent on
+ */
+struct cvmx_usb_pipe {
+	struct list_head node;
+	struct list_head transactions;
+	uint64_t interval;
+	uint64_t next_tx_frame;
+	enum cvmx_usb_pipe_flags flags;
+	enum cvmx_usb_speed device_speed;
+	enum cvmx_usb_transfer transfer_type;
+	enum cvmx_usb_direction transfer_dir;
+	int multi_count;
+	uint16_t max_packet;
+	uint8_t device_addr;
+	uint8_t endpoint_num;
+	uint8_t hub_device_addr;
+	uint8_t hub_port;
+	uint8_t pid_toggle;
+	uint8_t channel;
+	int8_t split_sc_frame;
+};
+
+struct cvmx_usb_tx_fifo {
+	struct {
+		int channel;
+		int size;
+		uint64_t address;
+	} entry[MAX_CHANNELS+1];
+	int head;
+	int tail;
+};
+
+/**
+ * struct cvmx_usb_state - the state of the USB block
+ *
+ * init_flags:		   Flags passed to initialize.
+ * index:		   Which USB block this is for.
+ * idle_hardware_channels: Bit set for every idle hardware channel.
+ * usbcx_hprt:		   Stored port status so we don't need to read a CSR to
+ *			   determine splits.
+ * pipe_for_channel:	   Map channels to pipes.
+ * pipe:		   Storage for pipes.
+ * indent:		   Used by debug output to indent functions.
+ * port_status:		   Last port status used for change notification.
+ * idle_pipes:		   List of open pipes that have no transactions.
+ * active_pipes:	   Active pipes indexed by transfer type.
+ * frame_number:	   Increments every SOF interrupt for time keeping.
+ * active_split:	   Points to the current active split, or NULL.
+ */
+struct cvmx_usb_state {
+	int init_flags;
+	int index;
+	int idle_hardware_channels;
+	union cvmx_usbcx_hprt usbcx_hprt;
+	struct cvmx_usb_pipe *pipe_for_channel[MAX_CHANNELS];
+	int indent;
+	struct cvmx_usb_port_status port_status;
+	struct list_head idle_pipes;
+	struct list_head active_pipes[4];
+	uint64_t frame_number;
+	struct cvmx_usb_transaction *active_split;
+	struct cvmx_usb_tx_fifo periodic;
+	struct cvmx_usb_tx_fifo nonperiodic;
+};
+
 struct octeon_hcd {
 	spinlock_t lock;
 	struct cvmx_usb_state usb;
@@ -31,15 +435,1530 @@
 	struct list_head dequeue_list;
 };
 
-/* convert between an HCD pointer and the corresponding struct octeon_hcd */
-static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
+/* This macro spins on a field waiting for it to reach a value */
+#define CVMX_WAIT_FOR_FIELD32(address, type, field, op, value, timeout_usec)\
+	({int result;							    \
+	do {								    \
+		uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec * \
+			octeon_get_clock_rate() / 1000000;		    \
+		type c;							    \
+		while (1) {						    \
+			c.u32 = __cvmx_usb_read_csr32(usb, address);	    \
+			if (c.s.field op (value)) {			    \
+				result = 0;				    \
+				break;					    \
+			} else if (cvmx_get_cycle() > done) {		    \
+				result = -1;				    \
+				break;					    \
+			} else						    \
+				cvmx_wait(100);				    \
+		}							    \
+	} while (0);							    \
+	result; })
+
+/*
+ * This macro logically sets a single field in a CSR. It does the sequence
+ * read, modify, and write
+ */
+#define USB_SET_FIELD32(address, type, field, value)		\
+	do {							\
+		type c;						\
+		c.u32 = __cvmx_usb_read_csr32(usb, address);	\
+		c.s.field = value;				\
+		__cvmx_usb_write_csr32(usb, address, c.u32);	\
+	} while (0)
+
+/* Returns the IO address to push/pop stuff data from the FIFOs */
+#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
+
+static int octeon_usb_get_clock_type(void)
 {
-	return (struct octeon_hcd *)(hcd->hcd_priv);
+	switch (cvmx_sysinfo_get()->board_type) {
+	case CVMX_BOARD_TYPE_BBGW_REF:
+	case CVMX_BOARD_TYPE_LANAI2_A:
+	case CVMX_BOARD_TYPE_LANAI2_U:
+	case CVMX_BOARD_TYPE_LANAI2_G:
+	case CVMX_BOARD_TYPE_UBNT_E100:
+		return USB_CLOCK_TYPE_CRYSTAL_12;
+	}
+	return USB_CLOCK_TYPE_REF_48;
 }
 
-static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
+/**
+ * Read a USB 32bit CSR. It performs the necessary address swizzle
+ * for 32bit CSRs and logs the value in a readable format if
+ * debugging is on.
+ *
+ * @usb:     USB block this access is for
+ * @address: 64bit address to read
+ *
+ * Returns: Result of the read
+ */
+static inline uint32_t __cvmx_usb_read_csr32(struct cvmx_usb_state *usb,
+					     uint64_t address)
 {
-	return container_of((void *)p, struct usb_hcd, hcd_priv);
+	uint32_t result = cvmx_read64_uint32(address ^ 4);
+	return result;
+}
+
+
+/**
+ * Write a USB 32bit CSR. It performs the necessary address
+ * swizzle for 32bit CSRs and logs the value in a readable format
+ * if debugging is on.
+ *
+ * @usb:     USB block this access is for
+ * @address: 64bit address to write
+ * @value:   Value to write
+ */
+static inline void __cvmx_usb_write_csr32(struct cvmx_usb_state *usb,
+					  uint64_t address, uint32_t value)
+{
+	cvmx_write64_uint32(address ^ 4, value);
+	cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+}
+
+
+/**
+ * Read a USB 64bit CSR. It logs the value in a readable format if
+ * debugging is on.
+ *
+ * @usb:     USB block this access is for
+ * @address: 64bit address to read
+ *
+ * Returns: Result of the read
+ */
+static inline uint64_t __cvmx_usb_read_csr64(struct cvmx_usb_state *usb,
+					     uint64_t address)
+{
+	uint64_t result = cvmx_read64_uint64(address);
+	return result;
+}
+
+
+/**
+ * Write a USB 64bit CSR. It logs the value in a readable format
+ * if debugging is on.
+ *
+ * @usb:     USB block this access is for
+ * @address: 64bit address to write
+ * @value:   Value to write
+ */
+static inline void __cvmx_usb_write_csr64(struct cvmx_usb_state *usb,
+					  uint64_t address, uint64_t value)
+{
+	cvmx_write64_uint64(address, value);
+}
+
+/**
+ * Return non zero if this pipe connects to a non HIGH speed
+ * device through a high speed hub.
+ *
+ * @usb:    USB block this access is for
+ * @pipe:   Pipe to check
+ *
+ * Returns: Non zero if we need to do split transactions
+ */
+static inline int __cvmx_usb_pipe_needs_split(struct cvmx_usb_state *usb,
+					      struct cvmx_usb_pipe *pipe)
+{
+	return pipe->device_speed != CVMX_USB_SPEED_HIGH &&
+	       usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH;
+}
+
+
+/**
+ * Trivial utility function to return the correct PID for a pipe
+ *
+ * @pipe:   pipe to check
+ *
+ * Returns: PID for pipe
+ */
+static inline int __cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
+{
+	if (pipe->pid_toggle)
+		return 2; /* Data1 */
+	else
+		return 0; /* Data0 */
+}
+
+
+/**
+ * Return the number of USB ports supported by this Octeon
+ * chip. If the chip doesn't support USB, or is not supported
+ * by this API, a zero will be returned. Most Octeon chips
+ * support one usb port, but some support two ports.
+ * cvmx_usb_initialize() must be called on independent
+ * struct cvmx_usb_state.
+ *
+ * Returns: Number of port, zero if usb isn't supported
+ */
+static int cvmx_usb_get_num_ports(void)
+{
+	int arch_ports = 0;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+		arch_ports = 1;
+	else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+		arch_ports = 2;
+	else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
+		arch_ports = 1;
+	else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
+		arch_ports = 1;
+	else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
+		arch_ports = 1;
+	else
+		arch_ports = 0;
+
+	return arch_ports;
+}
+
+/**
+ * Initialize a USB port for use. This must be called before any
+ * other access to the Octeon USB port is made. The port starts
+ * off in the disabled state.
+ *
+ * @usb:	 Pointer to an empty struct cvmx_usb_state
+ *		 that will be populated by the initialize call.
+ *		 This structure is then passed to all other USB
+ *		 functions.
+ * @usb_port_number:
+ *		 Which Octeon USB port to initialize.
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
+			       int usb_port_number)
+{
+	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
+	union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
+	enum cvmx_usb_initialize_flags flags = 0;
+	int i;
+
+	/* At first allow 0-1 for the usb port number */
+	if ((usb_port_number < 0) || (usb_port_number > 1))
+		return -EINVAL;
+	/* For all chips except 52XX there is only one port */
+	if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
+		return -EINVAL;
+	/* Try to determine clock type automatically */
+	if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) {
+		/* Only 12 MHZ crystals are supported */
+		flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
+	} else {
+		flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+
+		switch (octeon_usb_get_clock_type()) {
+		case USB_CLOCK_TYPE_REF_12:
+			flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+			break;
+		case USB_CLOCK_TYPE_REF_24:
+			flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+			break;
+		case USB_CLOCK_TYPE_REF_48:
+			flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+			break;
+		default:
+			return -EINVAL;
+			break;
+		}
+	}
+
+	memset(usb, 0, sizeof(*usb));
+	usb->init_flags = flags;
+
+	/* Initialize the USB state structure */
+	usb->index = usb_port_number;
+	INIT_LIST_HEAD(&usb->idle_pipes);
+	for (i = 0; i < ARRAY_SIZE(usb->active_pipes); i++)
+		INIT_LIST_HEAD(&usb->active_pipes[i]);
+
+	/*
+	 * Power On Reset and PHY Initialization
+	 *
+	 * 1. Wait for DCOK to assert (nothing to do)
+	 *
+	 * 2a. Write USBN0/1_CLK_CTL[POR] = 1 and
+	 *     USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0
+	 */
+	usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
+	usbn_clk_ctl.s.por = 1;
+	usbn_clk_ctl.s.hrst = 0;
+	usbn_clk_ctl.s.prst = 0;
+	usbn_clk_ctl.s.hclk_rst = 0;
+	usbn_clk_ctl.s.enable = 0;
+	/*
+	 * 2b. Select the USB reference clock/crystal parameters by writing
+	 *     appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON]
+	 */
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
+		/*
+		 * The USB port uses 12/24/48MHz 2.5V board clock
+		 * source at USB_XO. USB_XI should be tied to GND.
+		 * Most Octeon evaluation boards require this setting
+		 */
+		if (OCTEON_IS_MODEL(OCTEON_CN3XXX) ||
+		    OCTEON_IS_MODEL(OCTEON_CN56XX) ||
+		    OCTEON_IS_MODEL(OCTEON_CN50XX))
+			/* From CN56XX,CN50XX,CN31XX,CN30XX manuals */
+			usbn_clk_ctl.s.p_rtype = 2; /* p_rclk=1 & p_xenbn=0 */
+		else
+			/* From CN52XX manual */
+			usbn_clk_ctl.s.p_rtype = 1;
+
+		switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
+		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
+			usbn_clk_ctl.s.p_c_sel = 0;
+			break;
+		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:
+			usbn_clk_ctl.s.p_c_sel = 1;
+			break;
+		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:
+			usbn_clk_ctl.s.p_c_sel = 2;
+			break;
+		}
+	} else {
+		/*
+		 * The USB port uses a 12MHz crystal as clock source
+		 * at USB_XO and USB_XI
+		 */
+		if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
+			/* From CN31XX,CN30XX manual */
+			usbn_clk_ctl.s.p_rtype = 3; /* p_rclk=1 & p_xenbn=1 */
+		else
+			/* From CN56XX,CN52XX,CN50XX manuals. */
+			usbn_clk_ctl.s.p_rtype = 0;
+
+		usbn_clk_ctl.s.p_c_sel = 0;
+	}
+	/*
+	 * 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and
+	 *     setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down
+	 *     such that USB is as close as possible to 125Mhz
+	 */
+	{
+		int divisor = (octeon_get_clock_rate()+125000000-1)/125000000;
+		/* Lower than 4 doesn't seem to work properly */
+		if (divisor < 4)
+			divisor = 4;
+		usbn_clk_ctl.s.divide = divisor;
+		usbn_clk_ctl.s.divide2 = 0;
+	}
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+			       usbn_clk_ctl.u64);
+	/* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */
+	usbn_clk_ctl.s.hclk_rst = 1;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+			       usbn_clk_ctl.u64);
+	/* 2e.  Wait 64 core-clock cycles for HCLK to stabilize */
+	cvmx_wait(64);
+	/*
+	 * 3. Program the power-on reset field in the USBN clock-control
+	 *    register:
+	 *    USBN_CLK_CTL[POR] = 0
+	 */
+	usbn_clk_ctl.s.por = 0;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+			       usbn_clk_ctl.u64);
+	/* 4. Wait 1 ms for PHY clock to start */
+	mdelay(1);
+	/*
+	 * 5. Program the Reset input from automatic test equipment field in the
+	 *    USBP control and status register:
+	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 1
+	 */
+	usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index));
+	usbn_usbp_ctl_status.s.ate_reset = 1;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+			       usbn_usbp_ctl_status.u64);
+	/* 6. Wait 10 cycles */
+	cvmx_wait(10);
+	/*
+	 * 7. Clear ATE_RESET field in the USBN clock-control register:
+	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 0
+	 */
+	usbn_usbp_ctl_status.s.ate_reset = 0;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+			       usbn_usbp_ctl_status.u64);
+	/*
+	 * 8. Program the PHY reset field in the USBN clock-control register:
+	 *    USBN_CLK_CTL[PRST] = 1
+	 */
+	usbn_clk_ctl.s.prst = 1;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+			       usbn_clk_ctl.u64);
+	/*
+	 * 9. Program the USBP control and status register to select host or
+	 *    device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for
+	 *    device
+	 */
+	usbn_usbp_ctl_status.s.hst_mode = 0;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+			       usbn_usbp_ctl_status.u64);
+	/* 10. Wait 1 us */
+	udelay(1);
+	/*
+	 * 11. Program the hreset_n field in the USBN clock-control register:
+	 *     USBN_CLK_CTL[HRST] = 1
+	 */
+	usbn_clk_ctl.s.hrst = 1;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+			       usbn_clk_ctl.u64);
+	/* 12. Proceed to USB core initialization */
+	usbn_clk_ctl.s.enable = 1;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+			       usbn_clk_ctl.u64);
+	udelay(1);
+
+	/*
+	 * USB Core Initialization
+	 *
+	 * 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to
+	 *    determine USB core configuration parameters.
+	 *
+	 *    Nothing needed
+	 *
+	 * 2. Program the following fields in the global AHB configuration
+	 *    register (USBC_GAHBCFG)
+	 *    DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode
+	 *    Burst length, USBC_GAHBCFG[HBSTLEN] = 0
+	 *    Nonperiodic TxFIFO empty level (slave mode only),
+	 *    USBC_GAHBCFG[NPTXFEMPLVL]
+	 *    Periodic TxFIFO empty level (slave mode only),
+	 *    USBC_GAHBCFG[PTXFEMPLVL]
+	 *    Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1
+	 */
+	{
+		union cvmx_usbcx_gahbcfg usbcx_gahbcfg;
+		/* Due to an errata, CN31XX doesn't support DMA */
+		if (OCTEON_IS_MODEL(OCTEON_CN31XX))
+			usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
+		usbcx_gahbcfg.u32 = 0;
+		usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+			/* Only use one channel with non DMA */
+			usb->idle_hardware_channels = 0x1;
+		else if (OCTEON_IS_MODEL(OCTEON_CN5XXX))
+			/* CN5XXX have an errata with channel 3 */
+			usb->idle_hardware_channels = 0xf7;
+		else
+			usb->idle_hardware_channels = 0xff;
+		usbcx_gahbcfg.s.hbstlen = 0;
+		usbcx_gahbcfg.s.nptxfemplvl = 1;
+		usbcx_gahbcfg.s.ptxfemplvl = 1;
+		usbcx_gahbcfg.s.glblintrmsk = 1;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index),
+				       usbcx_gahbcfg.u32);
+	}
+	/*
+	 * 3. Program the following fields in USBC_GUSBCFG register.
+	 *    HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0
+	 *    ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0
+	 *    USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5
+	 *    PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0
+	 */
+	{
+		union cvmx_usbcx_gusbcfg usbcx_gusbcfg;
+		usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index));
+		usbcx_gusbcfg.s.toutcal = 0;
+		usbcx_gusbcfg.s.ddrsel = 0;
+		usbcx_gusbcfg.s.usbtrdtim = 0x5;
+		usbcx_gusbcfg.s.phylpwrclksel = 0;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index),
+				       usbcx_gusbcfg.u32);
+	}
+	/*
+	 * 4. The software must unmask the following bits in the USBC_GINTMSK
+	 *    register.
+	 *    OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1
+	 *    Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1
+	 */
+	{
+		union cvmx_usbcx_gintmsk usbcx_gintmsk;
+		int channel;
+
+		usbcx_gintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTMSK(usb->index));
+		usbcx_gintmsk.s.otgintmsk = 1;
+		usbcx_gintmsk.s.modemismsk = 1;
+		usbcx_gintmsk.s.hchintmsk = 1;
+		usbcx_gintmsk.s.sofmsk = 0;
+		/* We need RX FIFO interrupts if we don't have DMA */
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+			usbcx_gintmsk.s.rxflvlmsk = 1;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
+				       usbcx_gintmsk.u32);
+
+		/*
+		 * Disable all channel interrupts. We'll enable them per channel
+		 * later.
+		 */
+		for (channel = 0; channel < 8; channel++)
+			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
+	}
+
+	{
+		/*
+		 * Host Port Initialization
+		 *
+		 * 1. Program the host-port interrupt-mask field to unmask,
+		 *    USBC_GINTMSK[PRTINT] = 1
+		 */
+		USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk,
+				prtintmsk, 1);
+		USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk,
+				disconnintmsk, 1);
+		/*
+		 * 2. Program the USBC_HCFG register to select full-speed host
+		 *    or high-speed host.
+		 */
+		{
+			union cvmx_usbcx_hcfg usbcx_hcfg;
+			usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index));
+			usbcx_hcfg.s.fslssupp = 0;
+			usbcx_hcfg.s.fslspclksel = 0;
+			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32);
+		}
+		/*
+		 * 3. Program the port power bit to drive VBUS on the USB,
+		 *    USBC_HPRT[PRTPWR] = 1
+		 */
+		USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtpwr, 1);
+
+		/*
+		 * Steps 4-15 from the manual are done later in the port enable
+		 */
+	}
+
+	return 0;
+}
+
+
+/**
+ * Shutdown a USB port after a call to cvmx_usb_initialize().
+ * The port should be disabled with all pipes closed when this
+ * function is called.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_shutdown(struct cvmx_usb_state *usb)
+{
+	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
+
+	/* Make sure all pipes are closed */
+	if (!list_empty(&usb->idle_pipes) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS]) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT]) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_CONTROL]) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_BULK]))
+		return -EBUSY;
+
+	/* Disable the clocks and put them in power on reset */
+	usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
+	usbn_clk_ctl.s.enable = 1;
+	usbn_clk_ctl.s.por = 1;
+	usbn_clk_ctl.s.hclk_rst = 1;
+	usbn_clk_ctl.s.prst = 0;
+	usbn_clk_ctl.s.hrst = 0;
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+			       usbn_clk_ctl.u64);
+	return 0;
+}
+
+
+/**
+ * Enable a USB port. After this call succeeds, the USB port is
+ * online and servicing requests.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_enable(struct cvmx_usb_state *usb)
+{
+	union cvmx_usbcx_ghwcfg3 usbcx_ghwcfg3;
+
+	usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+
+	/*
+	 * If the port is already enabled the just return. We don't need to do
+	 * anything
+	 */
+	if (usb->usbcx_hprt.s.prtena)
+		return 0;
+
+	/* If there is nothing plugged into the port then fail immediately */
+	if (!usb->usbcx_hprt.s.prtconnsts) {
+		return -ETIMEDOUT;
+	}
+
+	/* Program the port reset bit to start the reset process */
+	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtrst, 1);
+
+	/*
+	 * Wait at least 50ms (high speed), or 10ms (full speed) for the reset
+	 * process to complete.
+	 */
+	mdelay(50);
+
+	/* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
+	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtrst, 0);
+
+	/* Wait for the USBC_HPRT[PRTENA]. */
+	if (CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt,
+				  prtena, ==, 1, 100000))
+		return -ETIMEDOUT;
+
+	/*
+	 * Read the port speed field to get the enumerated speed,
+	 * USBC_HPRT[PRTSPD].
+	 */
+	usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+	usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index));
+
+	/*
+	 * 13. Program the USBC_GRXFSIZ register to select the size of the
+	 *     receive FIFO (25%).
+	 */
+	USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), union cvmx_usbcx_grxfsiz,
+			rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4);
+	/*
+	 * 14. Program the USBC_GNPTXFSIZ register to select the size and the
+	 *     start address of the non- periodic transmit FIFO for nonperiodic
+	 *     transactions (50%).
+	 */
+	{
+		union cvmx_usbcx_gnptxfsiz siz;
+		siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index));
+		siz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2;
+		siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32);
+	}
+	/*
+	 * 15. Program the USBC_HPTXFSIZ register to select the size and start
+	 *     address of the periodic transmit FIFO for periodic transactions
+	 *     (25%).
+	 */
+	{
+		union cvmx_usbcx_hptxfsiz siz;
+		siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index));
+		siz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4;
+		siz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), siz.u32);
+	}
+	/* Flush all FIFOs */
+	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl, txfnum, 0x10);
+	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl, txfflsh, 1);
+	CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl,
+			      txfflsh, ==, 0, 100);
+	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl, rxfflsh, 1);
+	CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), union cvmx_usbcx_grstctl,
+			      rxfflsh, ==, 0, 100);
+
+	return 0;
+}
+
+
+/**
+ * Disable a USB port. After this call the USB port will not
+ * generate data transfers and will not generate events.
+ * Transactions in process will fail and call their
+ * associated callbacks.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_disable(struct cvmx_usb_state *usb)
+{
+	/* Disable the port */
+	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), union cvmx_usbcx_hprt, prtena, 1);
+	return 0;
+}
+
+
+/**
+ * Get the current state of the USB port. Use this call to
+ * determine if the usb port has anything connected, is enabled,
+ * or has some sort of error condition. The return value of this
+ * call has "changed" bits to signal of the value of some fields
+ * have changed between calls.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: Port status information
+ */
+static struct cvmx_usb_port_status cvmx_usb_get_status(struct cvmx_usb_state *usb)
+{
+	union cvmx_usbcx_hprt usbc_hprt;
+	struct cvmx_usb_port_status result;
+
+	memset(&result, 0, sizeof(result));
+
+	usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+	result.port_enabled = usbc_hprt.s.prtena;
+	result.port_over_current = usbc_hprt.s.prtovrcurract;
+	result.port_powered = usbc_hprt.s.prtpwr;
+	result.port_speed = usbc_hprt.s.prtspd;
+	result.connected = usbc_hprt.s.prtconnsts;
+	result.connect_change = (result.connected != usb->port_status.connected);
+
+	return result;
+}
+
+/**
+ * Open a virtual pipe between the host and a USB device. A pipe
+ * must be opened before data can be transferred between a device
+ * and Octeon.
+ *
+ * @usb:	     USB device state populated by cvmx_usb_initialize().
+ * @device_addr:
+ *		     USB device address to open the pipe to
+ *		     (0-127).
+ * @endpoint_num:
+ *		     USB endpoint number to open the pipe to
+ *		     (0-15).
+ * @device_speed:
+ *		     The speed of the device the pipe is going
+ *		     to. This must match the device's speed,
+ *		     which may be different than the port speed.
+ * @max_packet:	     The maximum packet length the device can
+ *		     transmit/receive (low speed=0-8, full
+ *		     speed=0-1023, high speed=0-1024). This value
+ *		     comes from the standard endpoint descriptor
+ *		     field wMaxPacketSize bits <10:0>.
+ * @transfer_type:
+ *		     The type of transfer this pipe is for.
+ * @transfer_dir:
+ *		     The direction the pipe is in. This is not
+ *		     used for control pipes.
+ * @interval:	     For ISOCHRONOUS and INTERRUPT transfers,
+ *		     this is how often the transfer is scheduled
+ *		     for. All other transfers should specify
+ *		     zero. The units are in frames (8000/sec at
+ *		     high speed, 1000/sec for full speed).
+ * @multi_count:
+ *		     For high speed devices, this is the maximum
+ *		     allowed number of packet per microframe.
+ *		     Specify zero for non high speed devices. This
+ *		     value comes from the standard endpoint descriptor
+ *		     field wMaxPacketSize bits <12:11>.
+ * @hub_device_addr:
+ *		     Hub device address this device is connected
+ *		     to. Devices connected directly to Octeon
+ *		     use zero. This is only used when the device
+ *		     is full/low speed behind a high speed hub.
+ *		     The address will be of the high speed hub,
+ *		     not and full speed hubs after it.
+ * @hub_port:	     Which port on the hub the device is
+ *		     connected. Use zero for devices connected
+ *		     directly to Octeon. Like hub_device_addr,
+ *		     this is only used for full/low speed
+ *		     devices behind a high speed hub.
+ *
+ * Returns: A non-NULL value is a pipe. NULL means an error.
+ */
+static struct cvmx_usb_pipe *cvmx_usb_open_pipe(struct cvmx_usb_state *usb,
+						int device_addr, int
+						endpoint_num,
+						enum cvmx_usb_speed
+							device_speed,
+						int max_packet,
+						enum cvmx_usb_transfer
+							transfer_type,
+						enum cvmx_usb_direction
+							transfer_dir,
+						int interval, int multi_count,
+						int hub_device_addr,
+						int hub_port)
+{
+	struct cvmx_usb_pipe *pipe;
+
+	if (unlikely((device_addr < 0) || (device_addr > MAX_USB_ADDRESS)))
+		return NULL;
+	if (unlikely((endpoint_num < 0) || (endpoint_num > MAX_USB_ENDPOINT)))
+		return NULL;
+	if (unlikely(device_speed > CVMX_USB_SPEED_LOW))
+		return NULL;
+	if (unlikely((max_packet <= 0) || (max_packet > 1024)))
+		return NULL;
+	if (unlikely(transfer_type > CVMX_USB_TRANSFER_INTERRUPT))
+		return NULL;
+	if (unlikely((transfer_dir != CVMX_USB_DIRECTION_OUT) &&
+		(transfer_dir != CVMX_USB_DIRECTION_IN)))
+		return NULL;
+	if (unlikely(interval < 0))
+		return NULL;
+	if (unlikely((transfer_type == CVMX_USB_TRANSFER_CONTROL) && interval))
+		return NULL;
+	if (unlikely(multi_count < 0))
+		return NULL;
+	if (unlikely((device_speed != CVMX_USB_SPEED_HIGH) &&
+		(multi_count != 0)))
+		return NULL;
+	if (unlikely((hub_device_addr < 0) || (hub_device_addr > MAX_USB_ADDRESS)))
+		return NULL;
+	if (unlikely((hub_port < 0) || (hub_port > MAX_USB_HUB_PORT)))
+		return NULL;
+
+	pipe = kzalloc(sizeof(*pipe), GFP_ATOMIC);
+	if (!pipe)
+		return NULL;
+	if ((device_speed == CVMX_USB_SPEED_HIGH) &&
+		(transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+		(transfer_type == CVMX_USB_TRANSFER_BULK))
+		pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+	pipe->device_addr = device_addr;
+	pipe->endpoint_num = endpoint_num;
+	pipe->device_speed = device_speed;
+	pipe->max_packet = max_packet;
+	pipe->transfer_type = transfer_type;
+	pipe->transfer_dir = transfer_dir;
+	INIT_LIST_HEAD(&pipe->transactions);
+
+	/*
+	 * All pipes use interval to rate limit NAK processing. Force an
+	 * interval if one wasn't supplied
+	 */
+	if (!interval)
+		interval = 1;
+	if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+		pipe->interval = interval*8;
+		/* Force start splits to be schedule on uFrame 0 */
+		pipe->next_tx_frame = ((usb->frame_number+7)&~7) + pipe->interval;
+	} else {
+		pipe->interval = interval;
+		pipe->next_tx_frame = usb->frame_number + pipe->interval;
+	}
+	pipe->multi_count = multi_count;
+	pipe->hub_device_addr = hub_device_addr;
+	pipe->hub_port = hub_port;
+	pipe->pid_toggle = 0;
+	pipe->split_sc_frame = -1;
+	list_add_tail(&pipe->node, &usb->idle_pipes);
+
+	/*
+	 * We don't need to tell the hardware about this pipe yet since
+	 * it doesn't have any submitted requests
+	 */
+
+	return pipe;
+}
+
+
+/**
+ * Poll the RX FIFOs and remove data as needed. This function is only used
+ * in non DMA mode. It is very important that this function be called quickly
+ * enough to prevent FIFO overflow.
+ *
+ * @usb:	USB device state populated by cvmx_usb_initialize().
+ */
+static void __cvmx_usb_poll_rx_fifo(struct cvmx_usb_state *usb)
+{
+	union cvmx_usbcx_grxstsph rx_status;
+	int channel;
+	int bytes;
+	uint64_t address;
+	uint32_t *ptr;
+
+	rx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GRXSTSPH(usb->index));
+	/* Only read data if IN data is there */
+	if (rx_status.s.pktsts != 2)
+		return;
+	/* Check if no data is available */
+	if (!rx_status.s.bcnt)
+		return;
+
+	channel = rx_status.s.chnum;
+	bytes = rx_status.s.bcnt;
+	if (!bytes)
+		return;
+
+	/* Get where the DMA engine would have written this data */
+	address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8);
+	ptr = cvmx_phys_to_ptr(address);
+	__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, address + bytes);
+
+	/* Loop writing the FIFO data for this packet into memory */
+	while (bytes > 0) {
+		*ptr++ = __cvmx_usb_read_csr32(usb, USB_FIFO_ADDRESS(channel, usb->index));
+		bytes -= 4;
+	}
+	CVMX_SYNCW;
+
+	return;
+}
+
+
+/**
+ * Fill the TX hardware fifo with data out of the software
+ * fifos
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @fifo:	    Software fifo to use
+ * @available:	    Amount of space in the hardware fifo
+ *
+ * Returns: Non zero if the hardware fifo was too small and needs
+ *	    to be serviced again.
+ */
+static int __cvmx_usb_fill_tx_hw(struct cvmx_usb_state *usb,
+				 struct cvmx_usb_tx_fifo *fifo, int available)
+{
+	/*
+	 * We're done either when there isn't anymore space or the software FIFO
+	 * is empty
+	 */
+	while (available && (fifo->head != fifo->tail)) {
+		int i = fifo->tail;
+		const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address);
+		uint64_t csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, usb->index) ^ 4;
+		int words = available;
+
+		/* Limit the amount of data to waht the SW fifo has */
+		if (fifo->entry[i].size <= available) {
+			words = fifo->entry[i].size;
+			fifo->tail++;
+			if (fifo->tail > MAX_CHANNELS)
+				fifo->tail = 0;
+		}
+
+		/* Update the next locations and counts */
+		available -= words;
+		fifo->entry[i].address += words * 4;
+		fifo->entry[i].size -= words;
+
+		/*
+		 * Write the HW fifo data. The read every three writes is due
+		 * to an errata on CN3XXX chips
+		 */
+		while (words > 3) {
+			cvmx_write64_uint32(csr_address, *ptr++);
+			cvmx_write64_uint32(csr_address, *ptr++);
+			cvmx_write64_uint32(csr_address, *ptr++);
+			cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+			words -= 3;
+		}
+		cvmx_write64_uint32(csr_address, *ptr++);
+		if (--words) {
+			cvmx_write64_uint32(csr_address, *ptr++);
+			if (--words)
+				cvmx_write64_uint32(csr_address, *ptr++);
+		}
+		cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+	}
+	return fifo->head != fifo->tail;
+}
+
+
+/**
+ * Check the hardware FIFOs and fill them as needed
+ *
+ * @usb:	USB device state populated by cvmx_usb_initialize().
+ */
+static void __cvmx_usb_poll_tx_fifo(struct cvmx_usb_state *usb)
+{
+	if (usb->periodic.head != usb->periodic.tail) {
+		union cvmx_usbcx_hptxsts tx_status;
+		tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXSTS(usb->index));
+		if (__cvmx_usb_fill_tx_hw(usb, &usb->periodic, tx_status.s.ptxfspcavail))
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, ptxfempmsk, 1);
+		else
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, ptxfempmsk, 0);
+	}
+
+	if (usb->nonperiodic.head != usb->nonperiodic.tail) {
+		union cvmx_usbcx_gnptxsts tx_status;
+		tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXSTS(usb->index));
+		if (__cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, tx_status.s.nptxfspcavail))
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, nptxfempmsk, 1);
+		else
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, nptxfempmsk, 0);
+	}
+
+	return;
+}
+
+
+/**
+ * Fill the TX FIFO with an outgoing packet
+ *
+ * @usb:	  USB device state populated by cvmx_usb_initialize().
+ * @channel:	  Channel number to get packet from
+ */
+static void __cvmx_usb_fill_tx_fifo(struct cvmx_usb_state *usb, int channel)
+{
+	union cvmx_usbcx_hccharx hcchar;
+	union cvmx_usbcx_hcspltx usbc_hcsplt;
+	union cvmx_usbcx_hctsizx usbc_hctsiz;
+	struct cvmx_usb_tx_fifo *fifo;
+
+	/* We only need to fill data on outbound channels */
+	hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+	if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT)
+		return;
+
+	/* OUT Splits only have data on the start and not the complete */
+	usbc_hcsplt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index));
+	if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
+		return;
+
+	/*
+	 * Find out how many bytes we need to fill and convert it into 32bit
+	 * words.
+	 */
+	usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+	if (!usbc_hctsiz.s.xfersize)
+		return;
+
+	if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) ||
+		(hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS))
+		fifo = &usb->periodic;
+	else
+		fifo = &usb->nonperiodic;
+
+	fifo->entry[fifo->head].channel = channel;
+	fifo->entry[fifo->head].address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8);
+	fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize+3)>>2;
+	fifo->head++;
+	if (fifo->head > MAX_CHANNELS)
+		fifo->head = 0;
+
+	__cvmx_usb_poll_tx_fifo(usb);
+
+	return;
+}
+
+/**
+ * Perform channel specific setup for Control transactions. All
+ * the generic stuff will already have been done in
+ * __cvmx_usb_start_channel()
+ *
+ * @usb:	  USB device state populated by cvmx_usb_initialize().
+ * @channel:	  Channel to setup
+ * @pipe:	  Pipe for control transaction
+ */
+static void __cvmx_usb_start_channel_control(struct cvmx_usb_state *usb,
+					     int channel,
+					     struct cvmx_usb_pipe *pipe)
+{
+	struct cvmx_usb_transaction *transaction =
+		list_first_entry(&pipe->transactions, typeof(*transaction),
+				 node);
+	union cvmx_usb_control_header *header =
+		cvmx_phys_to_ptr(transaction->control_header);
+	int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
+	int packets_to_transfer;
+	union cvmx_usbcx_hctsizx usbc_hctsiz;
+
+	usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+	switch (transaction->stage) {
+	case CVMX_USB_STAGE_NON_CONTROL:
+	case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+		cvmx_dprintf("%s: ERROR - Non control stage\n", __FUNCTION__);
+		break;
+	case CVMX_USB_STAGE_SETUP:
+		usbc_hctsiz.s.pid = 3; /* Setup */
+		bytes_to_transfer = sizeof(*header);
+		/* All Control operations start with a setup going OUT */
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir, CVMX_USB_DIRECTION_OUT);
+		/*
+		 * Setup send the control header instead of the buffer data. The
+		 * buffer data will be used in the next stage
+		 */
+		__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header);
+		break;
+	case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+		usbc_hctsiz.s.pid = 3; /* Setup */
+		bytes_to_transfer = 0;
+		/* All Control operations start with a setup going OUT */
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir, CVMX_USB_DIRECTION_OUT);
+		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), union cvmx_usbcx_hcspltx, compsplt, 1);
+		break;
+	case CVMX_USB_STAGE_DATA:
+		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+		if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+			if (header->s.request_type & 0x80)
+				bytes_to_transfer = 0;
+			else if (bytes_to_transfer > pipe->max_packet)
+				bytes_to_transfer = pipe->max_packet;
+		}
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				union cvmx_usbcx_hccharx, epdir,
+				((header->s.request_type & 0x80) ?
+					CVMX_USB_DIRECTION_IN :
+					CVMX_USB_DIRECTION_OUT));
+		break;
+	case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+		if (!(header->s.request_type & 0x80))
+			bytes_to_transfer = 0;
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				union cvmx_usbcx_hccharx, epdir,
+				((header->s.request_type & 0x80) ?
+					CVMX_USB_DIRECTION_IN :
+					CVMX_USB_DIRECTION_OUT));
+		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), union cvmx_usbcx_hcspltx, compsplt, 1);
+		break;
+	case CVMX_USB_STAGE_STATUS:
+		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+		bytes_to_transfer = 0;
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir,
+				((header->s.request_type & 0x80) ?
+					CVMX_USB_DIRECTION_OUT :
+					CVMX_USB_DIRECTION_IN));
+		break;
+	case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+		bytes_to_transfer = 0;
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, epdir,
+				((header->s.request_type & 0x80) ?
+					CVMX_USB_DIRECTION_OUT :
+					CVMX_USB_DIRECTION_IN));
+		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), union cvmx_usbcx_hcspltx, compsplt, 1);
+		break;
+	}
+
+	/*
+	 * Make sure the transfer never exceeds the byte limit of the hardware.
+	 * Further bytes will be sent as continued transactions
+	 */
+	if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
+		/* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
+		bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
+		bytes_to_transfer *= pipe->max_packet;
+	}
+
+	/*
+	 * Calculate the number of packets to transfer. If the length is zero
+	 * we still need to transfer one packet
+	 */
+	packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
+	if (packets_to_transfer == 0)
+		packets_to_transfer = 1;
+	else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
+		/*
+		 * Limit to one packet when not using DMA. Channels must be
+		 * restarted between every packet for IN transactions, so there
+		 * is no reason to do multiple packets in a row
+		 */
+		packets_to_transfer = 1;
+		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+	} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
+		/*
+		 * Limit the number of packet and data transferred to what the
+		 * hardware can handle
+		 */
+		packets_to_transfer = MAX_TRANSFER_PACKETS;
+		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+	}
+
+	usbc_hctsiz.s.xfersize = bytes_to_transfer;
+	usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+	__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
+	return;
+}
+
+
+/**
+ * Start a channel to perform the pipe's head transaction
+ *
+ * @usb:	  USB device state populated by cvmx_usb_initialize().
+ * @channel:	  Channel to setup
+ * @pipe:	  Pipe to start
+ */
+static void __cvmx_usb_start_channel(struct cvmx_usb_state *usb,
+				     int channel,
+				     struct cvmx_usb_pipe *pipe)
+{
+	struct cvmx_usb_transaction *transaction =
+		list_first_entry(&pipe->transactions, typeof(*transaction),
+				 node);
+
+	/* Make sure all writes to the DMA region get flushed */
+	CVMX_SYNCW;
+
+	/* Attach the channel to the pipe */
+	usb->pipe_for_channel[channel] = pipe;
+	pipe->channel = channel;
+	pipe->flags |= __CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+	/* Mark this channel as in use */
+	usb->idle_hardware_channels &= ~(1<<channel);
+
+	/* Enable the channel interrupt bits */
+	{
+		union cvmx_usbcx_hcintx usbc_hcint;
+		union cvmx_usbcx_hcintmskx usbc_hcintmsk;
+		union cvmx_usbcx_haintmsk usbc_haintmsk;
+
+		/* Clear all channel status bits */
+		usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index), usbc_hcint.u32);
+
+		usbc_hcintmsk.u32 = 0;
+		usbc_hcintmsk.s.chhltdmsk = 1;
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+			/*
+			 * Channels need these extra interrupts when we aren't
+			 * in DMA mode.
+			 */
+			usbc_hcintmsk.s.datatglerrmsk = 1;
+			usbc_hcintmsk.s.frmovrunmsk = 1;
+			usbc_hcintmsk.s.bblerrmsk = 1;
+			usbc_hcintmsk.s.xacterrmsk = 1;
+			if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+				/*
+				 * Splits don't generate xfercompl, so we need
+				 * ACK and NYET.
+				 */
+				usbc_hcintmsk.s.nyetmsk = 1;
+				usbc_hcintmsk.s.ackmsk = 1;
+			}
+			usbc_hcintmsk.s.nakmsk = 1;
+			usbc_hcintmsk.s.stallmsk = 1;
+			usbc_hcintmsk.s.xfercomplmsk = 1;
+		}
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), usbc_hcintmsk.u32);
+
+		/* Enable the channel interrupt to propagate */
+		usbc_haintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index));
+		usbc_haintmsk.s.haintmsk |= 1<<channel;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index), usbc_haintmsk.u32);
+	}
+
+	/* Setup the locations the DMA engines use  */
+	{
+		uint64_t dma_address = transaction->buffer + transaction->actual_bytes;
+		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+			dma_address = transaction->buffer + transaction->iso_packets[0].offset + transaction->actual_bytes;
+		__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, dma_address);
+		__cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, dma_address);
+	}
+
+	/* Setup both the size of the transfer and the SPLIT characteristics */
+	{
+		union cvmx_usbcx_hcspltx usbc_hcsplt = {.u32 = 0};
+		union cvmx_usbcx_hctsizx usbc_hctsiz = {.u32 = 0};
+		int packets_to_transfer;
+		int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
+
+		/*
+		 * ISOCHRONOUS transactions store each individual transfer size
+		 * in the packet structure, not the global buffer_length
+		 */
+		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+			bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes;
+
+		/*
+		 * We need to do split transactions when we are talking to non
+		 * high speed devices that are behind a high speed hub
+		 */
+		if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+			/*
+			 * On the start split phase (stage is even) record the
+			 * frame number we will need to send the split complete.
+			 * We only store the lower two bits since the time ahead
+			 * can only be two frames
+			 */
+			if ((transaction->stage&1) == 0) {
+				if (transaction->type == CVMX_USB_TRANSFER_BULK)
+					pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f;
+				else
+					pipe->split_sc_frame = (usb->frame_number + 2) & 0x7f;
+			} else
+				pipe->split_sc_frame = -1;
+
+			usbc_hcsplt.s.spltena = 1;
+			usbc_hcsplt.s.hubaddr = pipe->hub_device_addr;
+			usbc_hcsplt.s.prtaddr = pipe->hub_port;
+			usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE);
+
+			/*
+			 * SPLIT transactions can only ever transmit one data
+			 * packet so limit the transfer size to the max packet
+			 * size
+			 */
+			if (bytes_to_transfer > pipe->max_packet)
+				bytes_to_transfer = pipe->max_packet;
+
+			/*
+			 * ISOCHRONOUS OUT splits are unique in that they limit
+			 * data transfers to 188 byte chunks representing the
+			 * begin/middle/end of the data or all
+			 */
+			if (!usbc_hcsplt.s.compsplt &&
+				(pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+				(pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
+				/*
+				 * Clear the split complete frame number as
+				 * there isn't going to be a split complete
+				 */
+				pipe->split_sc_frame = -1;
+				/*
+				 * See if we've started this transfer and sent
+				 * data
+				 */
+				if (transaction->actual_bytes == 0) {
+					/*
+					 * Nothing sent yet, this is either a
+					 * begin or the entire payload
+					 */
+					if (bytes_to_transfer <= 188)
+						/* Entire payload in one go */
+						usbc_hcsplt.s.xactpos = 3;
+					else
+						/* First part of payload */
+						usbc_hcsplt.s.xactpos = 2;
+				} else {
+					/*
+					 * Continuing the previous data, we must
+					 * either be in the middle or at the end
+					 */
+					if (bytes_to_transfer <= 188)
+						/* End of payload */
+						usbc_hcsplt.s.xactpos = 1;
+					else
+						/* Middle of payload */
+						usbc_hcsplt.s.xactpos = 0;
+				}
+				/*
+				 * Again, the transfer size is limited to 188
+				 * bytes
+				 */
+				if (bytes_to_transfer > 188)
+					bytes_to_transfer = 188;
+			}
+		}
+
+		/*
+		 * Make sure the transfer never exceeds the byte limit of the
+		 * hardware. Further bytes will be sent as continued
+		 * transactions
+		 */
+		if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
+			/*
+			 * Round MAX_TRANSFER_BYTES to a multiple of out packet
+			 * size
+			 */
+			bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
+			bytes_to_transfer *= pipe->max_packet;
+		}
+
+		/*
+		 * Calculate the number of packets to transfer. If the length is
+		 * zero we still need to transfer one packet
+		 */
+		packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
+		if (packets_to_transfer == 0)
+			packets_to_transfer = 1;
+		else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
+			/*
+			 * Limit to one packet when not using DMA. Channels must
+			 * be restarted between every packet for IN
+			 * transactions, so there is no reason to do multiple
+			 * packets in a row
+			 */
+			packets_to_transfer = 1;
+			bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+		} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
+			/*
+			 * Limit the number of packet and data transferred to
+			 * what the hardware can handle
+			 */
+			packets_to_transfer = MAX_TRANSFER_PACKETS;
+			bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+		}
+
+		usbc_hctsiz.s.xfersize = bytes_to_transfer;
+		usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+		/* Update the DATA0/DATA1 toggle */
+		usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+		/*
+		 * High speed pipes may need a hardware ping before they start
+		 */
+		if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING)
+			usbc_hctsiz.s.dopng = 1;
+
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index), usbc_hcsplt.u32);
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
+	}
+
+	/* Setup the Host Channel Characteristics Register */
+	{
+		union cvmx_usbcx_hccharx usbc_hcchar = {.u32 = 0};
+
+		/*
+		 * Set the startframe odd/even properly. This is only used for
+		 * periodic
+		 */
+		usbc_hcchar.s.oddfrm = usb->frame_number&1;
+
+		/*
+		 * Set the number of back to back packets allowed by this
+		 * endpoint. Split transactions interpret "ec" as the number of
+		 * immediate retries of failure. These retries happen too
+		 * quickly, so we disable these entirely for splits
+		 */
+		if (__cvmx_usb_pipe_needs_split(usb, pipe))
+			usbc_hcchar.s.ec = 1;
+		else if (pipe->multi_count < 1)
+			usbc_hcchar.s.ec = 1;
+		else if (pipe->multi_count > 3)
+			usbc_hcchar.s.ec = 3;
+		else
+			usbc_hcchar.s.ec = pipe->multi_count;
+
+		/* Set the rest of the endpoint specific settings */
+		usbc_hcchar.s.devaddr = pipe->device_addr;
+		usbc_hcchar.s.eptype = transaction->type;
+		usbc_hcchar.s.lspddev = (pipe->device_speed == CVMX_USB_SPEED_LOW);
+		usbc_hcchar.s.epdir = pipe->transfer_dir;
+		usbc_hcchar.s.epnum = pipe->endpoint_num;
+		usbc_hcchar.s.mps = pipe->max_packet;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+	}
+
+	/* Do transaction type specific fixups as needed */
+	switch (transaction->type) {
+	case CVMX_USB_TRANSFER_CONTROL:
+		__cvmx_usb_start_channel_control(usb, channel, pipe);
+		break;
+	case CVMX_USB_TRANSFER_BULK:
+	case CVMX_USB_TRANSFER_INTERRUPT:
+		break;
+	case CVMX_USB_TRANSFER_ISOCHRONOUS:
+		if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
+			/*
+			 * ISO transactions require different PIDs depending on
+			 * direction and how many packets are needed
+			 */
+			if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
+				if (pipe->multi_count < 2) /* Need DATA0 */
+					USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), union cvmx_usbcx_hctsizx, pid, 0);
+				else /* Need MDATA */
+					USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), union cvmx_usbcx_hctsizx, pid, 3);
+			}
+		}
+		break;
+	}
+	{
+		union cvmx_usbcx_hctsizx usbc_hctsiz = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index))};
+		transaction->xfersize = usbc_hctsiz.s.xfersize;
+		transaction->pktcnt = usbc_hctsiz.s.pktcnt;
+	}
+	/* Remeber when we start a split transaction */
+	if (__cvmx_usb_pipe_needs_split(usb, pipe))
+		usb->active_split = transaction;
+	USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), union cvmx_usbcx_hccharx, chena, 1);
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+		__cvmx_usb_fill_tx_fifo(usb, channel);
+	return;
+}
+
+
+/**
+ * Find a pipe that is ready to be scheduled to hardware.
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @list:	 Pipe list to search
+ * @current_frame:
+ *		 Frame counter to use as a time reference.
+ *
+ * Returns: Pipe or NULL if none are ready
+ */
+static struct cvmx_usb_pipe *__cvmx_usb_find_ready_pipe(struct cvmx_usb_state *usb, struct list_head *list, uint64_t current_frame)
+{
+	struct cvmx_usb_pipe *pipe;
+
+	list_for_each_entry(pipe, list, node) {
+		struct cvmx_usb_transaction *t =
+			list_first_entry(&pipe->transactions, typeof(*t), node);
+		if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && t &&
+			(pipe->next_tx_frame <= current_frame) &&
+			((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) &&
+			(!usb->active_split || (usb->active_split == t))) {
+			CVMX_PREFETCH(pipe, 128);
+			CVMX_PREFETCH(t, 0);
+			return pipe;
+		}
+	}
+	return NULL;
+}
+
+
+/**
+ * Called whenever a pipe might need to be scheduled to the
+ * hardware.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @is_sof:	 True if this schedule was called on a SOF interrupt.
+ */
+static void __cvmx_usb_schedule(struct cvmx_usb_state *usb, int is_sof)
+{
+	int channel;
+	struct cvmx_usb_pipe *pipe;
+	int need_sof;
+	enum cvmx_usb_transfer ttype;
+
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+		/*
+		 * Without DMA we need to be careful to not schedule something
+		 * at the end of a frame and cause an overrun.
+		 */
+		union cvmx_usbcx_hfnum hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))};
+		union cvmx_usbcx_hfir hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))};
+		if (hfnum.s.frrem < hfir.s.frint/4)
+			goto done;
+	}
+
+	while (usb->idle_hardware_channels) {
+		/* Find an idle channel */
+		channel = __fls(usb->idle_hardware_channels);
+		if (unlikely(channel > 7))
+			break;
+
+		/* Find a pipe needing service */
+		pipe = NULL;
+		if (is_sof) {
+			/*
+			 * Only process periodic pipes on SOF interrupts. This
+			 * way we are sure that the periodic data is sent in the
+			 * beginning of the frame
+			 */
+			pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number);
+			if (likely(!pipe))
+				pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number);
+		}
+		if (likely(!pipe)) {
+			pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number);
+			if (likely(!pipe))
+				pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number);
+		}
+		if (!pipe)
+			break;
+
+		__cvmx_usb_start_channel(usb, channel, pipe);
+	}
+
+done:
+	/*
+	 * Only enable SOF interrupts when we have transactions pending in the
+	 * future that might need to be scheduled
+	 */
+	need_sof = 0;
+	for (ttype = CVMX_USB_TRANSFER_CONTROL; ttype <= CVMX_USB_TRANSFER_INTERRUPT; ttype++) {
+		list_for_each_entry(pipe, &usb->active_pipes[ttype], node) {
+			if (pipe->next_tx_frame > usb->frame_number) {
+				need_sof = 1;
+				break;
+			}
+		}
+	}
+	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), union cvmx_usbcx_gintmsk, sofmsk, need_sof);
+	return;
 }
 
 static inline struct octeon_hcd *cvmx_usb_to_octeon(struct cvmx_usb_state *p)
@@ -47,91 +1966,34 @@
 	return container_of(p, struct octeon_hcd, usb);
 }
 
-static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
+static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
 {
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	cvmx_usb_poll(&priv->usb);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void octeon_usb_port_callback(struct cvmx_usb_state *usb,
-				     enum cvmx_usb_callback reason,
-				     enum cvmx_usb_complete status,
-				     int pipe_handle,
-				     int submit_handle,
-				     int bytes_transferred,
-				     void *user_data)
-{
-	struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
-
-	spin_unlock(&priv->lock);
-	usb_hcd_poll_rh_status(octeon_to_hcd(priv));
-	spin_lock(&priv->lock);
-}
-
-static int octeon_usb_start(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	hcd->state = HC_STATE_RUNNING;
-	spin_lock_irqsave(&priv->lock, flags);
-	cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
-				   octeon_usb_port_callback, NULL);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return 0;
-}
-
-static void octeon_usb_stop(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
-				   NULL, NULL);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	hcd->state = HC_STATE_HALT;
-}
-
-static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-
-	return cvmx_usb_get_frame_number(&priv->usb);
+	return container_of((void *)p, struct usb_hcd, hcd_priv);
 }
 
 static void octeon_usb_urb_complete_callback(struct cvmx_usb_state *usb,
-					     enum cvmx_usb_callback reason,
 					     enum cvmx_usb_complete status,
-					     int pipe_handle,
-					     int submit_handle,
+					     struct cvmx_usb_pipe *pipe,
+					     struct cvmx_usb_transaction
+						*transaction,
 					     int bytes_transferred,
-					     void *user_data)
+					     struct urb *urb)
 {
 	struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
 	struct usb_hcd *hcd = octeon_to_hcd(priv);
 	struct device *dev = hcd->self.controller;
-	struct urb *urb = user_data;
 
 	urb->actual_length = bytes_transferred;
 	urb->hcpriv = NULL;
 
-	if (!list_empty(&urb->urb_list)) {
+	if (!list_empty(&urb->urb_list))
 		/*
 		 * It is on the dequeue_list, but we are going to call
 		 * usb_hcd_giveback_urb(), so we must clear it from
 		 * the list.  We got to it before the
 		 * octeon_usb_urb_dequeue_work() tasklet did.
 		 */
-		list_del(&urb->urb_list);
-		/* No longer on the dequeue_list. */
-		INIT_LIST_HEAD(&urb->urb_list);
-	}
+		list_del_init(&urb->urb_list);
 
 	/* For Isochronous transactions we need to update the URB packet status
 	   list from data in our private copy */
@@ -151,10 +2013,10 @@
 				urb->iso_frame_desc[i].actual_length = iso_packet[i].length;
 				urb->actual_length += urb->iso_frame_desc[i].actual_length;
 			} else {
-				dev_dbg(dev, "ISOCHRONOUS packet=%d of %d status=%d pipe=%d submit=%d size=%d\n",
+				dev_dbg(dev, "ISOCHRONOUS packet=%d of %d status=%d pipe=%p transaction=%p size=%d\n",
 					i, urb->number_of_packets,
-					iso_packet[i].status, pipe_handle,
-					submit_handle, iso_packet[i].length);
+					iso_packet[i].status, pipe,
+					transaction, iso_packet[i].length);
 				urb->iso_frame_desc[i].status = -EREMOTEIO;
 			}
 		}
@@ -172,26 +2034,26 @@
 			urb->status = -ENOENT;
 		break;
 	case CVMX_USB_COMPLETE_STALL:
-		dev_dbg(dev, "status=stall pipe=%d submit=%d size=%d\n",
-			pipe_handle, submit_handle, bytes_transferred);
+		dev_dbg(dev, "status=stall pipe=%p transaction=%p size=%d\n",
+			pipe, transaction, bytes_transferred);
 		urb->status = -EPIPE;
 		break;
 	case CVMX_USB_COMPLETE_BABBLEERR:
-		dev_dbg(dev, "status=babble pipe=%d submit=%d size=%d\n",
-			pipe_handle, submit_handle, bytes_transferred);
+		dev_dbg(dev, "status=babble pipe=%p transaction=%p size=%d\n",
+			pipe, transaction, bytes_transferred);
 		urb->status = -EPIPE;
 		break;
 	case CVMX_USB_COMPLETE_SHORT:
-		dev_dbg(dev, "status=short pipe=%d submit=%d size=%d\n",
-			pipe_handle, submit_handle, bytes_transferred);
+		dev_dbg(dev, "status=short pipe=%p transaction=%p size=%d\n",
+			pipe, transaction, bytes_transferred);
 		urb->status = -EREMOTEIO;
 		break;
 	case CVMX_USB_COMPLETE_ERROR:
 	case CVMX_USB_COMPLETE_XACTERR:
 	case CVMX_USB_COMPLETE_DATATGLERR:
 	case CVMX_USB_COMPLETE_FRAMEERR:
-		dev_dbg(dev, "status=%d pipe=%d submit=%d size=%d\n",
-			status, pipe_handle, submit_handle, bytes_transferred);
+		dev_dbg(dev, "status=%d pipe=%p transaction=%p size=%d\n",
+			status, pipe, transaction, bytes_transferred);
 		urb->status = -EPROTO;
 		break;
 	}
@@ -200,14 +2062,952 @@
 	spin_lock(&priv->lock);
 }
 
+/**
+ * Signal the completion of a transaction and free it. The
+ * transaction will be removed from the pipe transaction list.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe the transaction is on
+ * @transaction:
+ *		 Transaction that completed
+ * @complete_code:
+ *		 Completion code
+ */
+static void __cvmx_usb_perform_complete(struct cvmx_usb_state *usb,
+					struct cvmx_usb_pipe *pipe,
+					struct cvmx_usb_transaction *transaction,
+					enum cvmx_usb_complete complete_code)
+{
+	/* If this was a split then clear our split in progress marker */
+	if (usb->active_split == transaction)
+		usb->active_split = NULL;
+
+	/*
+	 * Isochronous transactions need extra processing as they might not be
+	 * done after a single data transfer
+	 */
+	if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
+		/* Update the number of bytes transferred in this ISO packet */
+		transaction->iso_packets[0].length = transaction->actual_bytes;
+		transaction->iso_packets[0].status = complete_code;
+
+		/*
+		 * If there are more ISOs pending and we succeeded, schedule the
+		 * next one
+		 */
+		if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) {
+			/* No bytes transferred for this packet as of yet */
+			transaction->actual_bytes = 0;
+			/* One less ISO waiting to transfer */
+			transaction->iso_number_packets--;
+			/* Increment to the next location in our packet array */
+			transaction->iso_packets++;
+			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+			goto done;
+		}
+	}
+
+	/* Remove the transaction from the pipe list */
+	list_del(&transaction->node);
+	if (list_empty(&pipe->transactions))
+		list_move_tail(&pipe->node, &usb->idle_pipes);
+	octeon_usb_urb_complete_callback(usb, complete_code, pipe,
+					 transaction,
+					 transaction->actual_bytes,
+					 transaction->urb);
+	kfree(transaction);
+done:
+	return;
+}
+
+
+/**
+ * Submit a usb transaction to a pipe. Called for all types
+ * of transactions.
+ *
+ * @usb:
+ * @pipe:	    Which pipe to submit to.
+ * @type:	    Transaction type
+ * @buffer:	    User buffer for the transaction
+ * @buffer_length:
+ *		    User buffer's length in bytes
+ * @control_header:
+ *		    For control transactions, the 8 byte standard header
+ * @iso_start_frame:
+ *		    For ISO transactions, the start frame
+ * @iso_number_packets:
+ *		    For ISO, the number of packet in the transaction.
+ * @iso_packets:
+ *		    A description of each ISO packet
+ * @urb:	    URB for the callback
+ *
+ * Returns: Transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *__cvmx_usb_submit_transaction(struct cvmx_usb_state *usb,
+								  struct cvmx_usb_pipe *pipe,
+								  enum cvmx_usb_transfer type,
+								  uint64_t buffer,
+								  int buffer_length,
+								  uint64_t control_header,
+								  int iso_start_frame,
+								  int iso_number_packets,
+								  struct cvmx_usb_iso_packet *iso_packets,
+								  struct urb *urb)
+{
+	struct cvmx_usb_transaction *transaction;
+
+	if (unlikely(pipe->transfer_type != type))
+		return NULL;
+
+	transaction = kzalloc(sizeof(*transaction), GFP_ATOMIC);
+	if (unlikely(!transaction))
+		return NULL;
+
+	transaction->type = type;
+	transaction->buffer = buffer;
+	transaction->buffer_length = buffer_length;
+	transaction->control_header = control_header;
+	/* FIXME: This is not used, implement it. */
+	transaction->iso_start_frame = iso_start_frame;
+	transaction->iso_number_packets = iso_number_packets;
+	transaction->iso_packets = iso_packets;
+	transaction->urb = urb;
+	if (transaction->type == CVMX_USB_TRANSFER_CONTROL)
+		transaction->stage = CVMX_USB_STAGE_SETUP;
+	else
+		transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+
+	if (!list_empty(&pipe->transactions)) {
+		list_add_tail(&transaction->node, &pipe->transactions);
+	} else {
+		list_add_tail(&transaction->node, &pipe->transactions);
+		list_move_tail(&pipe->node,
+			       &usb->active_pipes[pipe->transfer_type]);
+
+		/*
+		 * We may need to schedule the pipe if this was the head of the
+		 * pipe.
+		 */
+		__cvmx_usb_schedule(usb, 0);
+	}
+
+	return transaction;
+}
+
+
+/**
+ * Call to submit a USB Bulk transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_bulk(struct cvmx_usb_state *usb,
+							 struct cvmx_usb_pipe *pipe,
+							 struct urb *urb)
+{
+	return __cvmx_usb_submit_transaction(usb, pipe, CVMX_USB_TRANSFER_BULK,
+					     urb->transfer_dma,
+					     urb->transfer_buffer_length,
+					     0, /* control_header */
+					     0, /* iso_start_frame */
+					     0, /* iso_number_packets */
+					     NULL, /* iso_packets */
+					     urb);
+}
+
+
+/**
+ * Call to submit a USB Interrupt transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB returned when the callback is called.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_interrupt(struct cvmx_usb_state *usb,
+							      struct cvmx_usb_pipe *pipe,
+							      struct urb *urb)
+{
+	return __cvmx_usb_submit_transaction(usb, pipe,
+					     CVMX_USB_TRANSFER_INTERRUPT,
+					     urb->transfer_dma,
+					     urb->transfer_buffer_length,
+					     0, /* control_header */
+					     0, /* iso_start_frame */
+					     0, /* iso_number_packets */
+					     NULL, /* iso_packets */
+					     urb);
+}
+
+
+/**
+ * Call to submit a USB Control transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_control(struct cvmx_usb_state *usb,
+							    struct cvmx_usb_pipe *pipe,
+							    struct urb *urb)
+{
+	int buffer_length = urb->transfer_buffer_length;
+	uint64_t control_header = urb->setup_dma;
+	union cvmx_usb_control_header *header =
+		cvmx_phys_to_ptr(control_header);
+
+	if ((header->s.request_type & 0x80) == 0)
+		buffer_length = le16_to_cpu(header->s.length);
+
+	return __cvmx_usb_submit_transaction(usb, pipe,
+					     CVMX_USB_TRANSFER_CONTROL,
+					     urb->transfer_dma, buffer_length,
+					     control_header,
+					     0, /* iso_start_frame */
+					     0, /* iso_number_packets */
+					     NULL, /* iso_packets */
+					     urb);
+}
+
+
+/**
+ * Call to submit a USB Isochronous transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB returned when the callback is called.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_isochronous(struct cvmx_usb_state *usb,
+								struct cvmx_usb_pipe *pipe,
+								struct urb *urb)
+{
+	struct cvmx_usb_iso_packet *packets;
+
+	packets = (struct cvmx_usb_iso_packet *) urb->setup_packet;
+	return __cvmx_usb_submit_transaction(usb, pipe,
+					     CVMX_USB_TRANSFER_ISOCHRONOUS,
+					     urb->transfer_dma,
+					     urb->transfer_buffer_length,
+					     0, /* control_header */
+					     urb->start_frame,
+					     urb->number_of_packets,
+					     packets, urb);
+}
+
+
+/**
+ * Cancel one outstanding request in a pipe. Canceling a request
+ * can fail if the transaction has already completed before cancel
+ * is called. Even after a successful cancel call, it may take
+ * a frame or two for the cvmx_usb_poll() function to call the
+ * associated callback.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe to cancel requests in.
+ * @transaction: Transaction to cancel, returned by the submit function.
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_cancel(struct cvmx_usb_state *usb,
+			   struct cvmx_usb_pipe *pipe,
+			   struct cvmx_usb_transaction *transaction)
+{
+	/*
+	 * If the transaction is the HEAD of the queue and scheduled. We need to
+	 * treat it special
+	 */
+	if (list_first_entry(&pipe->transactions, typeof(*transaction), node) ==
+	    transaction && (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) {
+		union cvmx_usbcx_hccharx usbc_hcchar;
+
+		usb->pipe_for_channel[pipe->channel] = NULL;
+		pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+		CVMX_SYNCW;
+
+		usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index));
+		/*
+		 * If the channel isn't enabled then the transaction already
+		 * completed.
+		 */
+		if (usbc_hcchar.s.chena) {
+			usbc_hcchar.s.chdis = 1;
+			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32);
+		}
+	}
+	__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_CANCEL);
+	return 0;
+}
+
+
+/**
+ * Cancel all outstanding requests in a pipe. Logically all this
+ * does is call cvmx_usb_cancel() in a loop.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe to cancel requests in.
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_cancel_all(struct cvmx_usb_state *usb,
+			       struct cvmx_usb_pipe *pipe)
+{
+	struct cvmx_usb_transaction *transaction, *next;
+
+	/* Simply loop through and attempt to cancel each transaction */
+	list_for_each_entry_safe(transaction, next, &pipe->transactions, node) {
+		int result = cvmx_usb_cancel(usb, pipe, transaction);
+		if (unlikely(result != 0))
+			return result;
+	}
+	return 0;
+}
+
+
+/**
+ * Close a pipe created with cvmx_usb_open_pipe().
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe to close.
+ *
+ * Returns: 0 or a negative error code. EBUSY is returned if the pipe has
+ *	    outstanding transfers.
+ */
+static int cvmx_usb_close_pipe(struct cvmx_usb_state *usb,
+			       struct cvmx_usb_pipe *pipe)
+{
+	/* Fail if the pipe has pending transactions */
+	if (!list_empty(&pipe->transactions))
+		return -EBUSY;
+
+	list_del(&pipe->node);
+	kfree(pipe);
+
+	return 0;
+}
+
+/**
+ * Get the current USB protocol level frame number. The frame
+ * number is always in the range of 0-0x7ff.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: USB frame number
+ */
+static int cvmx_usb_get_frame_number(struct cvmx_usb_state *usb)
+{
+	int frame_number;
+	union cvmx_usbcx_hfnum usbc_hfnum;
+
+	usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+	frame_number = usbc_hfnum.s.frnum;
+
+	return frame_number;
+}
+
+
+/**
+ * Poll a channel for status
+ *
+ * @usb:     USB device
+ * @channel: Channel to poll
+ *
+ * Returns: Zero on success
+ */
+static int __cvmx_usb_poll_channel(struct cvmx_usb_state *usb, int channel)
+{
+	union cvmx_usbcx_hcintx usbc_hcint;
+	union cvmx_usbcx_hctsizx usbc_hctsiz;
+	union cvmx_usbcx_hccharx usbc_hcchar;
+	struct cvmx_usb_pipe *pipe;
+	struct cvmx_usb_transaction *transaction;
+	int bytes_this_transfer;
+	int bytes_in_last_packet;
+	int packets_processed;
+	int buffer_space_left;
+
+	/* Read the interrupt status bits for the channel */
+	usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
+
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+		usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+
+		if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) {
+			/*
+			 * There seems to be a bug in CN31XX which can cause
+			 * interrupt IN transfers to get stuck until we do a
+			 * write of HCCHARX without changing things
+			 */
+			__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+			return 0;
+		}
+
+		/*
+		 * In non DMA mode the channels don't halt themselves. We need
+		 * to manually disable channels that are left running
+		 */
+		if (!usbc_hcint.s.chhltd) {
+			if (usbc_hcchar.s.chena) {
+				union cvmx_usbcx_hcintmskx hcintmsk;
+				/* Disable all interrupts except CHHLTD */
+				hcintmsk.u32 = 0;
+				hcintmsk.s.chhltdmsk = 1;
+				__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), hcintmsk.u32);
+				usbc_hcchar.s.chdis = 1;
+				__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+				return 0;
+			} else if (usbc_hcint.s.xfercompl) {
+				/*
+				 * Successful IN/OUT with transfer complete.
+				 * Channel halt isn't needed.
+				 */
+			} else {
+				cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel);
+				return 0;
+			}
+		}
+	} else {
+		/*
+		 * There is are no interrupts that we need to process when the
+		 * channel is still running
+		 */
+		if (!usbc_hcint.s.chhltd)
+			return 0;
+	}
+
+	/* Disable the channel interrupts now that it is done */
+	__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
+	usb->idle_hardware_channels |= (1<<channel);
+
+	/* Make sure this channel is tied to a valid pipe */
+	pipe = usb->pipe_for_channel[channel];
+	CVMX_PREFETCH(pipe, 0);
+	CVMX_PREFETCH(pipe, 128);
+	if (!pipe)
+		return 0;
+	transaction = list_first_entry(&pipe->transactions, typeof(*transaction),
+				       node);
+	CVMX_PREFETCH(transaction, 0);
+
+	/*
+	 * Disconnect this pipe from the HW channel. Later the schedule
+	 * function will figure out which pipe needs to go
+	 */
+	usb->pipe_for_channel[channel] = NULL;
+	pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+	/*
+	 * Read the channel config info so we can figure out how much data
+	 * transfered
+	 */
+	usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+	usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+	/*
+	 * Calculating the number of bytes successfully transferred is dependent
+	 * on the transfer direction
+	 */
+	packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt;
+	if (usbc_hcchar.s.epdir) {
+		/*
+		 * IN transactions are easy. For every byte received the
+		 * hardware decrements xfersize. All we need to do is subtract
+		 * the current value of xfersize from its starting value and we
+		 * know how many bytes were written to the buffer
+		 */
+		bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize;
+	} else {
+		/*
+		 * OUT transaction don't decrement xfersize. Instead pktcnt is
+		 * decremented on every successful packet send. The hardware
+		 * does this when it receives an ACK, or NYET. If it doesn't
+		 * receive one of these responses pktcnt doesn't change
+		 */
+		bytes_this_transfer = packets_processed * usbc_hcchar.s.mps;
+		/*
+		 * The last packet may not be a full transfer if we didn't have
+		 * enough data
+		 */
+		if (bytes_this_transfer > transaction->xfersize)
+			bytes_this_transfer = transaction->xfersize;
+	}
+	/* Figure out how many bytes were in the last packet of the transfer */
+	if (packets_processed)
+		bytes_in_last_packet = bytes_this_transfer - (packets_processed-1) * usbc_hcchar.s.mps;
+	else
+		bytes_in_last_packet = bytes_this_transfer;
+
+	/*
+	 * As a special case, setup transactions output the setup header, not
+	 * the user's data. For this reason we don't count setup data as bytes
+	 * transferred
+	 */
+	if ((transaction->stage == CVMX_USB_STAGE_SETUP) ||
+		(transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE))
+		bytes_this_transfer = 0;
+
+	/*
+	 * Add the bytes transferred to the running total. It is important that
+	 * bytes_this_transfer doesn't count any data that needs to be
+	 * retransmitted
+	 */
+	transaction->actual_bytes += bytes_this_transfer;
+	if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+		buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes;
+	else
+		buffer_space_left = transaction->buffer_length - transaction->actual_bytes;
+
+	/*
+	 * We need to remember the PID toggle state for the next transaction.
+	 * The hardware already updated it for the next transaction
+	 */
+	pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0);
+
+	/*
+	 * For high speed bulk out, assume the next transaction will need to do
+	 * a ping before proceeding. If this isn't true the ACK processing below
+	 * will clear this flag
+	 */
+	if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+		(pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
+		(pipe->transfer_dir == CVMX_USB_DIRECTION_OUT))
+		pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+	if (usbc_hcint.s.stall) {
+		/*
+		 * STALL as a response means this transaction cannot be
+		 * completed because the device can't process transactions. Tell
+		 * the user. Any data that was transferred will be counted on
+		 * the actual bytes transferred
+		 */
+		pipe->pid_toggle = 0;
+		__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL);
+	} else if (usbc_hcint.s.xacterr) {
+		/*
+		 * We know at least one packet worked if we get a ACK or NAK.
+		 * Reset the retry counter
+		 */
+		if (usbc_hcint.s.nak || usbc_hcint.s.ack)
+			transaction->retries = 0;
+		transaction->retries++;
+		if (transaction->retries > MAX_RETRIES) {
+			/*
+			 * XactErr as a response means the device signaled
+			 * something wrong with the transfer. For example, PID
+			 * toggle errors cause these
+			 */
+			__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR);
+		} else {
+			/*
+			 * If this was a split then clear our split in progress
+			 * marker
+			 */
+			if (usb->active_split == transaction)
+				usb->active_split = NULL;
+			/*
+			 * Rewind to the beginning of the transaction by anding
+			 * off the split complete bit
+			 */
+			transaction->stage &= ~1;
+			pipe->split_sc_frame = -1;
+			pipe->next_tx_frame += pipe->interval;
+			if (pipe->next_tx_frame < usb->frame_number)
+				pipe->next_tx_frame = usb->frame_number + pipe->interval -
+						      (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+		}
+	} else if (usbc_hcint.s.bblerr) {
+		/* Babble Error (BblErr) */
+		__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_BABBLEERR);
+	} else if (usbc_hcint.s.datatglerr) {
+		/* We'll retry the exact same transaction again */
+		transaction->retries++;
+	} else if (usbc_hcint.s.nyet) {
+		/*
+		 * NYET as a response is only allowed in three cases: as a
+		 * response to a ping, as a response to a split transaction, and
+		 * as a response to a bulk out. The ping case is handled by
+		 * hardware, so we only have splits and bulk out
+		 */
+		if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
+			transaction->retries = 0;
+			/*
+			 * If there is more data to go then we need to try
+			 * again. Otherwise this transaction is complete
+			 */
+			if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
+				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+		} else {
+			/*
+			 * Split transactions retry the split complete 4 times
+			 * then rewind to the start split and do the entire
+			 * transactions again
+			 */
+			transaction->retries++;
+			if ((transaction->retries & 0x3) == 0) {
+				/*
+				 * Rewind to the beginning of the transaction by
+				 * anding off the split complete bit
+				 */
+				transaction->stage &= ~1;
+				pipe->split_sc_frame = -1;
+			}
+		}
+	} else if (usbc_hcint.s.ack) {
+		transaction->retries = 0;
+		/*
+		 * The ACK bit can only be checked after the other error bits.
+		 * This is because a multi packet transfer may succeed in a
+		 * number of packets and then get a different response on the
+		 * last packet. In this case both ACK and the last response bit
+		 * will be set. If none of the other response bits is set, then
+		 * the last packet must have been an ACK
+		 *
+		 * Since we got an ACK, we know we don't need to do a ping on
+		 * this pipe
+		 */
+		pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+		switch (transaction->type) {
+		case CVMX_USB_TRANSFER_CONTROL:
+			switch (transaction->stage) {
+			case CVMX_USB_STAGE_NON_CONTROL:
+			case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+				/* This should be impossible */
+				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
+				break;
+			case CVMX_USB_STAGE_SETUP:
+				pipe->pid_toggle = 1;
+				if (__cvmx_usb_pipe_needs_split(usb, pipe))
+					transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE;
+				else {
+					union cvmx_usb_control_header *header =
+						cvmx_phys_to_ptr(transaction->control_header);
+					if (header->s.length)
+						transaction->stage = CVMX_USB_STAGE_DATA;
+					else
+						transaction->stage = CVMX_USB_STAGE_STATUS;
+				}
+				break;
+			case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+				{
+					union cvmx_usb_control_header *header =
+						cvmx_phys_to_ptr(transaction->control_header);
+					if (header->s.length)
+						transaction->stage = CVMX_USB_STAGE_DATA;
+					else
+						transaction->stage = CVMX_USB_STAGE_STATUS;
+				}
+				break;
+			case CVMX_USB_STAGE_DATA:
+				if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+					transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE;
+					/*
+					 * For setup OUT data that are splits,
+					 * the hardware doesn't appear to count
+					 * transferred data. Here we manually
+					 * update the data transferred
+					 */
+					if (!usbc_hcchar.s.epdir) {
+						if (buffer_space_left < pipe->max_packet)
+							transaction->actual_bytes += buffer_space_left;
+						else
+							transaction->actual_bytes += pipe->max_packet;
+					}
+				} else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
+					pipe->pid_toggle = 1;
+					transaction->stage = CVMX_USB_STAGE_STATUS;
+				}
+				break;
+			case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+				if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
+					pipe->pid_toggle = 1;
+					transaction->stage = CVMX_USB_STAGE_STATUS;
+				} else {
+					transaction->stage = CVMX_USB_STAGE_DATA;
+				}
+				break;
+			case CVMX_USB_STAGE_STATUS:
+				if (__cvmx_usb_pipe_needs_split(usb, pipe))
+					transaction->stage = CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE;
+				else
+					__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+				break;
+			case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+				break;
+			}
+			break;
+		case CVMX_USB_TRANSFER_BULK:
+		case CVMX_USB_TRANSFER_INTERRUPT:
+			/*
+			 * The only time a bulk transfer isn't complete when it
+			 * finishes with an ACK is during a split transaction.
+			 * For splits we need to continue the transfer if more
+			 * data is needed
+			 */
+			if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+				if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL)
+					transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+				else {
+					if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet))
+						transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+					else {
+						if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
+							pipe->next_tx_frame += pipe->interval;
+							__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+					}
+				}
+			} else {
+				if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+				    (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
+				    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+				    (usbc_hcint.s.nak))
+					pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+				if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) {
+					if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
+						pipe->next_tx_frame += pipe->interval;
+					__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+				}
+			}
+			break;
+		case CVMX_USB_TRANSFER_ISOCHRONOUS:
+			if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+				/*
+				 * ISOCHRONOUS OUT splits don't require a
+				 * complete split stage. Instead they use a
+				 * sequence of begin OUT splits to transfer the
+				 * data 188 bytes at a time. Once the transfer
+				 * is complete, the pipe sleeps until the next
+				 * schedule interval
+				 */
+				if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
+					/*
+					 * If no space left or this wasn't a max
+					 * size packet then this transfer is
+					 * complete. Otherwise start it again to
+					 * send the next 188 bytes
+					 */
+					if (!buffer_space_left || (bytes_this_transfer < 188)) {
+						pipe->next_tx_frame += pipe->interval;
+						__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+					}
+				} else {
+					if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) {
+						/*
+						 * We are in the incoming data
+						 * phase. Keep getting data
+						 * until we run out of space or
+						 * get a small packet
+						 */
+						if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
+							pipe->next_tx_frame += pipe->interval;
+							__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+						}
+					} else
+						transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+				}
+			} else {
+				pipe->next_tx_frame += pipe->interval;
+				__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+			}
+			break;
+		}
+	} else if (usbc_hcint.s.nak) {
+		/*
+		 * If this was a split then clear our split in progress marker.
+		 */
+		if (usb->active_split == transaction)
+			usb->active_split = NULL;
+		/*
+		 * NAK as a response means the device couldn't accept the
+		 * transaction, but it should be retried in the future. Rewind
+		 * to the beginning of the transaction by anding off the split
+		 * complete bit. Retry in the next interval
+		 */
+		transaction->retries = 0;
+		transaction->stage &= ~1;
+		pipe->next_tx_frame += pipe->interval;
+		if (pipe->next_tx_frame < usb->frame_number)
+			pipe->next_tx_frame = usb->frame_number + pipe->interval -
+				(usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+	} else {
+		struct cvmx_usb_port_status port;
+		port = cvmx_usb_get_status(usb);
+		if (port.port_enabled) {
+			/* We'll retry the exact same transaction again */
+			transaction->retries++;
+		} else {
+			/*
+			 * We get channel halted interrupts with no result bits
+			 * sets when the cable is unplugged
+			 */
+			__cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
+		}
+	}
+	return 0;
+}
+
+static void octeon_usb_port_callback(struct cvmx_usb_state *usb)
+{
+	struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
+
+	spin_unlock(&priv->lock);
+	usb_hcd_poll_rh_status(octeon_to_hcd(priv));
+	spin_lock(&priv->lock);
+}
+
+/**
+ * Poll the USB block for status and call all needed callback
+ * handlers. This function is meant to be called in the interrupt
+ * handler for the USB controller. It can also be called
+ * periodically in a loop for non-interrupt based operation.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_poll(struct cvmx_usb_state *usb)
+{
+	union cvmx_usbcx_hfnum usbc_hfnum;
+	union cvmx_usbcx_gintsts usbc_gintsts;
+
+	CVMX_PREFETCH(usb, 0);
+	CVMX_PREFETCH(usb, 1*128);
+	CVMX_PREFETCH(usb, 2*128);
+	CVMX_PREFETCH(usb, 3*128);
+	CVMX_PREFETCH(usb, 4*128);
+
+	/* Update the frame counter */
+	usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+	if ((usb->frame_number&0x3fff) > usbc_hfnum.s.frnum)
+		usb->frame_number += 0x4000;
+	usb->frame_number &= ~0x3fffull;
+	usb->frame_number |= usbc_hfnum.s.frnum;
+
+	/* Read the pending interrupts */
+	usbc_gintsts.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTSTS(usb->index));
+
+	/* Clear the interrupts now that we know about them */
+	__cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32);
+
+	if (usbc_gintsts.s.rxflvl) {
+		/*
+		 * RxFIFO Non-Empty (RxFLvl)
+		 * Indicates that there is at least one packet pending to be
+		 * read from the RxFIFO.
+		 *
+		 * In DMA mode this is handled by hardware
+		 */
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+			__cvmx_usb_poll_rx_fifo(usb);
+	}
+	if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) {
+		/* Fill the Tx FIFOs when not in DMA mode */
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+			__cvmx_usb_poll_tx_fifo(usb);
+	}
+	if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) {
+		union cvmx_usbcx_hprt usbc_hprt;
+		/*
+		 * Disconnect Detected Interrupt (DisconnInt)
+		 * Asserted when a device disconnect is detected.
+		 *
+		 * Host Port Interrupt (PrtInt)
+		 * The core sets this bit to indicate a change in port status of
+		 * one of the O2P USB core ports in Host mode. The application
+		 * must read the Host Port Control and Status (HPRT) register to
+		 * determine the exact event that caused this interrupt. The
+		 * application must clear the appropriate status bit in the Host
+		 * Port Control and Status register to clear this bit.
+		 *
+		 * Call the user's port callback
+		 */
+		octeon_usb_port_callback(usb);
+		/* Clear the port change bits */
+		usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+		usbc_hprt.s.prtena = 0;
+		__cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32);
+	}
+	if (usbc_gintsts.s.hchint) {
+		/*
+		 * Host Channels Interrupt (HChInt)
+		 * The core sets this bit to indicate that an interrupt is
+		 * pending on one of the channels of the core (in Host mode).
+		 * The application must read the Host All Channels Interrupt
+		 * (HAINT) register to determine the exact number of the channel
+		 * on which the interrupt occurred, and then read the
+		 * corresponding Host Channel-n Interrupt (HCINTn) register to
+		 * determine the exact cause of the interrupt. The application
+		 * must clear the appropriate status bit in the HCINTn register
+		 * to clear this bit.
+		 */
+		union cvmx_usbcx_haint usbc_haint;
+		usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index));
+		while (usbc_haint.u32) {
+			int channel;
+
+			channel = __fls(usbc_haint.u32);
+			__cvmx_usb_poll_channel(usb, channel);
+			usbc_haint.u32 ^= 1<<channel;
+		}
+	}
+
+	__cvmx_usb_schedule(usb, usbc_gintsts.s.sof);
+
+	return 0;
+}
+
+/* convert between an HCD pointer and the corresponding struct octeon_hcd */
+static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
+{
+	return (struct octeon_hcd *)(hcd->hcd_priv);
+}
+
+static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
+{
+	struct octeon_hcd *priv = hcd_to_octeon(hcd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	cvmx_usb_poll(&priv->usb);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int octeon_usb_start(struct usb_hcd *hcd)
+{
+	hcd->state = HC_STATE_RUNNING;
+	return 0;
+}
+
+static void octeon_usb_stop(struct usb_hcd *hcd)
+{
+	hcd->state = HC_STATE_HALT;
+}
+
+static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
+{
+	struct octeon_hcd *priv = hcd_to_octeon(hcd);
+
+	return cvmx_usb_get_frame_number(&priv->usb);
+}
+
 static int octeon_usb_urb_enqueue(struct usb_hcd *hcd,
 				  struct urb *urb,
 				  gfp_t mem_flags)
 {
 	struct octeon_hcd *priv = hcd_to_octeon(hcd);
 	struct device *dev = hcd->self.controller;
-	int submit_handle = -1;
-	int pipe_handle;
+	struct cvmx_usb_transaction *transaction = NULL;
+	struct cvmx_usb_pipe *pipe;
 	unsigned long flags;
 	struct cvmx_usb_iso_packet *iso_packet;
 	struct usb_host_endpoint *ep = urb->ep;
@@ -276,26 +3076,24 @@
 				dev = dev->parent;
 			}
 		}
-		pipe_handle = cvmx_usb_open_pipe(&priv->usb,
-						 0,
-						 usb_pipedevice(urb->pipe),
-						 usb_pipeendpoint(urb->pipe),
-						 speed,
-						 le16_to_cpu(ep->desc.wMaxPacketSize) & 0x7ff,
-						 transfer_type,
-						 usb_pipein(urb->pipe) ? CVMX_USB_DIRECTION_IN : CVMX_USB_DIRECTION_OUT,
-						 urb->interval,
-						 (le16_to_cpu(ep->desc.wMaxPacketSize) >> 11) & 0x3,
-						 split_device,
-						 split_port);
-		if (pipe_handle < 0) {
+		pipe = cvmx_usb_open_pipe(&priv->usb, usb_pipedevice(urb->pipe),
+					  usb_pipeendpoint(urb->pipe), speed,
+					  le16_to_cpu(ep->desc.wMaxPacketSize) & 0x7ff,
+					  transfer_type,
+					  usb_pipein(urb->pipe) ?
+						CVMX_USB_DIRECTION_IN :
+						CVMX_USB_DIRECTION_OUT,
+					  urb->interval,
+					  (le16_to_cpu(ep->desc.wMaxPacketSize) >> 11) & 0x3,
+					  split_device, split_port);
+		if (!pipe) {
 			spin_unlock_irqrestore(&priv->lock, flags);
 			dev_dbg(dev, "Failed to create pipe\n");
 			return -ENOMEM;
 		}
-		ep->hcpriv = (void *)(0x10000L + pipe_handle);
+		ep->hcpriv = pipe;
 	} else {
-		pipe_handle = 0xffff & (long)ep->hcpriv;
+		pipe = ep->hcpriv;
 	}
 
 	switch (usb_pipetype(urb->pipe)) {
@@ -323,20 +3121,13 @@
 			 * this saves us a bunch of logic.
 			 */
 			urb->setup_packet = (char *)iso_packet;
-			submit_handle = cvmx_usb_submit_isochronous(&priv->usb, pipe_handle,
-							urb->start_frame,
-							0 /* flags */ ,
-							urb->number_of_packets,
-							iso_packet,
-							urb->transfer_dma,
-							urb->transfer_buffer_length,
-							octeon_usb_urb_complete_callback,
-							urb);
+			transaction = cvmx_usb_submit_isochronous(&priv->usb,
+								  pipe, urb);
 			/*
 			 * If submit failed we need to free our private packet
 			 * list.
 			 */
-			if (submit_handle < 0) {
+			if (!transaction) {
 				urb->setup_packet = NULL;
 				kfree(iso_packet);
 			}
@@ -345,59 +3136,41 @@
 	case PIPE_INTERRUPT:
 		dev_dbg(dev, "Submit interrupt to %d.%d\n",
 			usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
-		submit_handle = cvmx_usb_submit_interrupt(&priv->usb, pipe_handle,
-					      urb->transfer_dma,
-					      urb->transfer_buffer_length,
-					      octeon_usb_urb_complete_callback,
-					      urb);
+		transaction = cvmx_usb_submit_interrupt(&priv->usb, pipe, urb);
 		break;
 	case PIPE_CONTROL:
 		dev_dbg(dev, "Submit control to %d.%d\n",
 			usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
-		submit_handle = cvmx_usb_submit_control(&priv->usb, pipe_handle,
-					    urb->setup_dma,
-					    urb->transfer_dma,
-					    urb->transfer_buffer_length,
-					    octeon_usb_urb_complete_callback,
-					    urb);
+		transaction = cvmx_usb_submit_control(&priv->usb, pipe, urb);
 		break;
 	case PIPE_BULK:
 		dev_dbg(dev, "Submit bulk to %d.%d\n",
 			usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
-		submit_handle = cvmx_usb_submit_bulk(&priv->usb, pipe_handle,
-					 urb->transfer_dma,
-					 urb->transfer_buffer_length,
-					 octeon_usb_urb_complete_callback,
-					 urb);
+		transaction = cvmx_usb_submit_bulk(&priv->usb, pipe, urb);
 		break;
 	}
-	if (submit_handle < 0) {
+	if (!transaction) {
 		spin_unlock_irqrestore(&priv->lock, flags);
 		dev_dbg(dev, "Failed to submit\n");
 		return -ENOMEM;
 	}
-	urb->hcpriv = (void *)(long)(((submit_handle & 0xffff) << 16) | pipe_handle);
+	urb->hcpriv = transaction;
 	spin_unlock_irqrestore(&priv->lock, flags);
 	return 0;
 }
 
 static void octeon_usb_urb_dequeue_work(unsigned long arg)
 {
+	struct urb *urb;
+	struct urb *next;
 	unsigned long flags;
 	struct octeon_hcd *priv = (struct octeon_hcd *)arg;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	while (!list_empty(&priv->dequeue_list)) {
-		int pipe_handle;
-		int submit_handle;
-		struct urb *urb = container_of(priv->dequeue_list.next, struct urb, urb_list);
-		list_del(&urb->urb_list);
-		/* not enqueued on dequeue_list */
-		INIT_LIST_HEAD(&urb->urb_list);
-		pipe_handle = 0xffff & (long)urb->hcpriv;
-		submit_handle = ((long)urb->hcpriv) >> 16;
-		cvmx_usb_cancel(&priv->usb, pipe_handle, submit_handle);
+	list_for_each_entry_safe(urb, next, &priv->dequeue_list, urb_list) {
+		list_del_init(&urb->urb_list);
+		cvmx_usb_cancel(&priv->usb, urb->ep->hcpriv, urb->hcpriv);
 	}
 
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -429,12 +3202,12 @@
 
 	if (ep->hcpriv) {
 		struct octeon_hcd *priv = hcd_to_octeon(hcd);
-		int pipe_handle = 0xffff & (long)ep->hcpriv;
+		struct cvmx_usb_pipe *pipe = ep->hcpriv;
 		unsigned long flags;
 		spin_lock_irqsave(&priv->lock, flags);
-		cvmx_usb_cancel_all(&priv->usb, pipe_handle);
-		if (cvmx_usb_close_pipe(&priv->usb, pipe_handle))
-			dev_dbg(dev, "Closing pipe %d failed\n", pipe_handle);
+		cvmx_usb_cancel_all(&priv->usb, pipe);
+		if (cvmx_usb_close_pipe(&priv->usb, pipe))
+			dev_dbg(dev, "Closing pipe %p failed\n", pipe);
 		spin_unlock_irqrestore(&priv->lock, flags);
 		ep->hcpriv = NULL;
 	}
@@ -506,7 +3279,7 @@
 			dev_dbg(dev, " C_CONNECTION\n");
 			/* Clears drivers internal connect status change flag */
 			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+			priv->usb.port_status = cvmx_usb_get_status(&priv->usb);
 			spin_unlock_irqrestore(&priv->lock, flags);
 			break;
 		case USB_PORT_FEAT_C_RESET:
@@ -515,7 +3288,7 @@
 			 * Clears the driver's internal Port Reset Change flag.
 			 */
 			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+			priv->usb.port_status = cvmx_usb_get_status(&priv->usb);
 			spin_unlock_irqrestore(&priv->lock, flags);
 			break;
 		case USB_PORT_FEAT_C_ENABLE:
@@ -525,7 +3298,7 @@
 			 * Change flag.
 			 */
 			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+			priv->usb.port_status = cvmx_usb_get_status(&priv->usb);
 			spin_unlock_irqrestore(&priv->lock, flags);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
@@ -540,7 +3313,7 @@
 			dev_dbg(dev, " C_OVER_CURRENT\n");
 			/* Clears the driver's overcurrent Change flag */
 			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+			priv->usb.port_status = cvmx_usb_get_status(&priv->usb);
 			spin_unlock_irqrestore(&priv->lock, flags);
 			break;
 		default:
@@ -705,7 +3478,7 @@
 	tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
 	INIT_LIST_HEAD(&priv->dequeue_list);
 
-	status = cvmx_usb_initialize(&priv->usb, usb_num, CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO);
+	status = cvmx_usb_initialize(&priv->usb, usb_num);
 	if (status) {
 		dev_dbg(dev, "USB initialization failed with %d\n", status);
 		kfree(hcd);
diff --git a/drivers/staging/octeon-usb/cvmx-usbcx-defs.h b/drivers/staging/octeon-usb/octeon-hcd.h
similarity index 82%
rename from drivers/staging/octeon-usb/cvmx-usbcx-defs.h
rename to drivers/staging/octeon-usb/octeon-hcd.h
index d349d77..42fe4fe 100644
--- a/drivers/staging/octeon-usb/cvmx-usbcx-defs.h
+++ b/drivers/staging/octeon-usb/octeon-hcd.h
@@ -1,7 +1,14 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
+/*
+ * Octeon HCD hardware register definitions.
  *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Some parts of the code were originally released under BSD license:
+ *
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
@@ -14,17 +21,17 @@
  *     copyright notice, this list of conditions and the following
  *     disclaimer in the documentation and/or other materials provided
  *     with the distribution.
-
+ *
  *   * Neither the name of Cavium Networks nor the names of
  *     its contributors may be used to endorse or promote products
  *     derived from this software without specific prior written
  *     permission.
-
+ *
  * This Software, including technical data, may be subject to U.S. export
  * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import  regulations in other
+ * regulations, and may be subject to export or import regulations in other
  * countries.
-
+ *
  * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
  * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
  * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
@@ -33,20 +40,12 @@
  * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
  * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
  * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
  * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * cvmx-usbcx-defs.h
- *
- * Configuration and status register (CSR) type definitions for
- * Octeon usbcx.
- *
  */
-#ifndef __CVMX_USBCX_TYPEDEFS_H__
-#define __CVMX_USBCX_TYPEDEFS_H__
+
+#ifndef __OCTEON_HCD_H__
+#define __OCTEON_HCD_H__
 
 #define CVMX_USBCXBASE 0x00016F0010000000ull
 #define CVMX_USBCXREG1(reg, bid) \
@@ -81,6 +80,19 @@
 #define CVMX_USBCX_HPTXFSIZ(bid)	CVMX_USBCXREG1(0x100, bid)
 #define CVMX_USBCX_HPTXSTS(bid)		CVMX_USBCXREG1(0x410, bid)
 
+#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
+#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
+
+#define CVMX_USBNXREG1(reg, bid) \
+	(CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
+#define CVMX_USBNXREG2(reg, bid) \
+	(CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
+
+#define CVMX_USBNX_CLK_CTL(bid)		CVMX_USBNXREG1(0x10, bid)
+#define CVMX_USBNX_DMA0_INB_CHN0(bid)	CVMX_USBNXREG2(0x818, bid)
+#define CVMX_USBNX_DMA0_OUTB_CHN0(bid)	CVMX_USBNXREG2(0x858, bid)
+#define CVMX_USBNX_USBP_CTL_STATUS(bid)	CVMX_USBNXREG1(0x18, bid)
+
 /**
  * cvmx_usbc#_gahbcfg
  *
@@ -1525,4 +1537,283 @@
 	} s;
 };
 
-#endif
+/**
+ * cvmx_usbn#_clk_ctl
+ *
+ * USBN_CLK_CTL = USBN's Clock Control
+ *
+ * This register is used to control the frequency of the hclk and the
+ * hreset and phy_rst signals.
+ */
+union cvmx_usbnx_clk_ctl {
+	uint64_t u64;
+	/**
+	 * struct cvmx_usbnx_clk_ctl_s
+	 * @divide2: The 'hclk' used by the USB subsystem is derived
+	 *	from the eclk.
+	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
+	 *	be zero because it is not implemented, so the maximum
+	 *	ratio of eclk/hclk is currently 16.
+	 *	The actual divide number for hclk is:
+	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
+	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
+	 *	generate the hclk in the USB Subsystem is held
+	 *	in reset. This bit must be set to '0' before
+	 *	changing the value os DIVIDE in this register.
+	 *	The reset to the HCLK_DIVIDERis also asserted
+	 *	when core reset is asserted.
+	 * @p_x_on: Force USB-PHY on during suspend.
+	 *	'1' USB-PHY XO block is powered-down during
+	 *	suspend.
+	 *	'0' USB-PHY XO block is powered-up during
+	 *	suspend.
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 * @p_rtype: PHY reference clock type
+	 *	On CN50XX/CN52XX/CN56XX the values are:
+	 *		'0' The USB-PHY uses a 12MHz crystal as a clock source
+	 *		    at the USB_XO and USB_XI pins.
+	 *		'1' Reserved.
+	 *		'2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the
+	 *		    USB_XO pin. USB_XI should be tied to ground in this
+	 *		    case.
+	 *		'3' Reserved.
+	 *	On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are:
+	 *		'0' Reserved.
+	 *		'1' Reserved.
+	 *		'2' The PHY PLL uses the XO block output as a reference.
+	 *		    The XO block uses an external clock supplied on the
+	 *		    XO pin. USB_XI should be tied to ground for this
+	 *		    usage.
+	 *		'3' The XO block uses the clock from a crystal.
+	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
+	 *	remain powered in Suspend Mode.
+	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
+	 *	powered down in suspend mode.
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 * @p_c_sel: Phy clock speed select.
+	 *	Selects the reference clock / crystal frequency.
+	 *	'11': Reserved
+	 *	'10': 48 MHz (reserved when a crystal is used)
+	 *	'01': 24 MHz (reserved when a crystal is used)
+	 *	'00': 12 MHz
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 *	NOTE: if a crystal is used as a reference clock,
+	 *	this field must be set to 12 MHz.
+	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
+	 * @sd_mode: Scaledown mode for the USBC. Control timing events
+	 *	in the USBC, for normal operation this must be '0'.
+	 * @s_bist: Starts bist on the hclk memories, during the '0'
+	 *	to '1' transition.
+	 * @por: Power On Reset for the PHY.
+	 *	Resets all the PHYS registers and state machines.
+	 * @enable: When '1' allows the generation of the hclk. When
+	 *	'0' the hclk will not be generated. SEE DIVIDE
+	 *	field of this register.
+	 * @prst: When this field is '0' the reset associated with
+	 *	the phy_clk functionality in the USB Subsystem is
+	 *	help in reset. This bit should not be set to '1'
+	 *	until the time it takes 6 clocks (hclk or phy_clk,
+	 *	whichever is slower) has passed. Under normal
+	 *	operation once this bit is set to '1' it should not
+	 *	be set to '0'.
+	 * @hrst: When this field is '0' the reset associated with
+	 *	the hclk functioanlity in the USB Subsystem is
+	 *	held in reset.This bit should not be set to '1'
+	 *	until 12ms after phy_clk is stable. Under normal
+	 *	operation, once this bit is set to '1' it should
+	 *	not be set to '0'.
+	 * @divide: The frequency of 'hclk' used by the USB subsystem
+	 *	is the eclk frequency divided by the value of
+	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+	 *	DIVIDE2 of this register.
+	 *	The hclk frequency should be less than 125Mhz.
+	 *	After writing a value to this field the SW should
+	 *	read the field for the value written.
+	 *	The ENABLE field of this register should not be set
+	 *	until AFTER this field is set and then read.
+	 */
+	struct cvmx_usbnx_clk_ctl_s {
+		uint64_t reserved_20_63	: 44;
+		uint64_t divide2	: 2;
+		uint64_t hclk_rst	: 1;
+		uint64_t p_x_on		: 1;
+		uint64_t p_rtype	: 2;
+		uint64_t p_com_on	: 1;
+		uint64_t p_c_sel	: 2;
+		uint64_t cdiv_byp	: 1;
+		uint64_t sd_mode	: 2;
+		uint64_t s_bist		: 1;
+		uint64_t por		: 1;
+		uint64_t enable		: 1;
+		uint64_t prst		: 1;
+		uint64_t hrst		: 1;
+		uint64_t divide		: 3;
+	} s;
+};
+
+/**
+ * cvmx_usbn#_usbp_ctl_status
+ *
+ * USBN_USBP_CTL_STATUS = USBP Control And Status Register
+ *
+ * Contains general control and status information for the USBN block.
+ */
+union cvmx_usbnx_usbp_ctl_status {
+	uint64_t u64;
+	/**
+	 * struct cvmx_usbnx_usbp_ctl_status_s
+	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
+	 * @txvreftune: HS DC Voltage Level Adjustment
+	 * @txfslstune: FS/LS Source Impedence Adjustment
+	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
+	 * @sqrxtune: Squelch Threshold Adjustment
+	 * @compdistune: Disconnect Threshold Adjustment
+	 * @otgtune: VBUS Valid Threshold Adjustment
+	 * @otgdisable: OTG Block Disable
+	 * @portreset: Per_Port Reset
+	 * @drvvbus: Drive VBUS
+	 * @lsbist: Low-Speed BIST Enable.
+	 * @fsbist: Full-Speed BIST Enable.
+	 * @hsbist: High-Speed BIST Enable.
+	 * @bist_done: PHY Bist Done.
+	 *	Asserted at the end of the PHY BIST sequence.
+	 * @bist_err: PHY Bist Error.
+	 *	Indicates an internal error was detected during
+	 *	the BIST sequence.
+	 * @tdata_out: PHY Test Data Out.
+	 *	Presents either internaly generated signals or
+	 *	test register contents, based upon the value of
+	 *	test_data_out_sel.
+	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
+	 *	Normally should be set to zero.
+	 *	When customers have no intent to use USB PHY
+	 *	interface, they should:
+	 *	- still provide 3.3V to USB_VDD33, and
+	 *	- tie USB_REXT to 3.3V supply, and
+	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
+	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
+	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
+	 *	with byte-counts between packets. When set to 0
+	 *	the L2C DMA address is incremented to the next
+	 *	4-byte aligned address after adding byte-count.
+	 * @usbc_end: Bigendian input to the USB Core. This should be
+	 *	set to '0' for operation.
+	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+	 *	This signal enables the pull-down resistance on
+	 *	the D+ line. '1' pull down-resistance is connected
+	 *	to D+/ '0' pull down resistance is not connected
+	 *	to D+. When an A/B device is acting as a host
+	 *	(downstream-facing port), dp_pulldown and
+	 *	dm_pulldown are enabled. This must not toggle
+	 *	during normal opeartion.
+	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+	 *	This signal enables the pull-down resistance on
+	 *	the D- line. '1' pull down-resistance is connected
+	 *	to D-. '0' pull down resistance is not connected
+	 *	to D-. When an A/B device is acting as a host
+	 *	(downstream-facing port), dp_pulldown and
+	 *	dm_pulldown are enabled. This must not toggle
+	 *	during normal opeartion.
+	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
+	 *	USB is acting as device. This field needs to be
+	 *	set while the USB is in reset.
+	 * @tuning: Transmitter Tuning for High-Speed Operation.
+	 *	Tunes the current supply and rise/fall output
+	 *	times for high-speed operation.
+	 *	[20:19] == 11: Current supply increased
+	 *	approximately 9%
+	 *	[20:19] == 10: Current supply increased
+	 *	approximately 4.5%
+	 *	[20:19] == 01: Design default.
+	 *	[20:19] == 00: Current supply decreased
+	 *	approximately 4.5%
+	 *	[22:21] == 11: Rise and fall times are increased.
+	 *	[22:21] == 10: Design default.
+	 *	[22:21] == 01: Rise and fall times are decreased.
+	 *	[22:21] == 00: Rise and fall times are decreased
+	 *	further as compared to the 01 setting.
+	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+	 *	Enables or disables bit stuffing on data[15:8]
+	 *	when bit-stuffing is enabled.
+	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+	 *	Enables or disables bit stuffing on data[7:0]
+	 *	when bit-stuffing is enabled.
+	 * @loop_enb: PHY Loopback Test Enable.
+	 *	'1': During data transmission the receive is
+	 *	enabled.
+	 *	'0': During data transmission the receive is
+	 *	disabled.
+	 *	Must be '0' for normal operation.
+	 * @vtest_enb: Analog Test Pin Enable.
+	 *	'1' The PHY's analog_test pin is enabled for the
+	 *	input and output of applicable analog test signals.
+	 *	'0' THe analog_test pin is disabled.
+	 * @bist_enb: Built-In Self Test Enable.
+	 *	Used to activate BIST in the PHY.
+	 * @tdata_sel: Test Data Out Select.
+	 *	'1' test_data_out[3:0] (PHY) register contents
+	 *	are output. '0' internaly generated signals are
+	 *	output.
+	 * @taddr_in: Mode Address for Test Interface.
+	 *	Specifies the register address for writing to or
+	 *	reading from the PHY test interface register.
+	 * @tdata_in: Internal Testing Register Input Data and Select
+	 *	This is a test bus. Data is present on [3:0],
+	 *	and its corresponding select (enable) is present
+	 *	on bits [7:4].
+	 * @ate_reset: Reset input from automatic test equipment.
+	 *	This is a test signal. When the USB Core is
+	 *	powered up (not in Susned Mode), an automatic
+	 *	tester can use this to disable phy_clock and
+	 *	free_clk, then re-eanable them with an aligned
+	 *	phase.
+	 *	'1': The phy_clk and free_clk outputs are
+	 *	disabled. "0": The phy_clock and free_clk outputs
+	 *	are available within a specific period after the
+	 *	de-assertion.
+	 */
+	struct cvmx_usbnx_usbp_ctl_status_s {
+		uint64_t txrisetune		: 1;
+		uint64_t txvreftune		: 4;
+		uint64_t txfslstune		: 4;
+		uint64_t txhsxvtune		: 2;
+		uint64_t sqrxtune		: 3;
+		uint64_t compdistune		: 3;
+		uint64_t otgtune		: 3;
+		uint64_t otgdisable		: 1;
+		uint64_t portreset		: 1;
+		uint64_t drvvbus		: 1;
+		uint64_t lsbist			: 1;
+		uint64_t fsbist			: 1;
+		uint64_t hsbist			: 1;
+		uint64_t bist_done		: 1;
+		uint64_t bist_err		: 1;
+		uint64_t tdata_out		: 4;
+		uint64_t siddq			: 1;
+		uint64_t txpreemphasistune	: 1;
+		uint64_t dma_bmode		: 1;
+		uint64_t usbc_end		: 1;
+		uint64_t usbp_bist		: 1;
+		uint64_t tclk			: 1;
+		uint64_t dp_pulld		: 1;
+		uint64_t dm_pulld		: 1;
+		uint64_t hst_mode		: 1;
+		uint64_t tuning			: 4;
+		uint64_t tx_bs_enh		: 1;
+		uint64_t tx_bs_en		: 1;
+		uint64_t loop_enb		: 1;
+		uint64_t vtest_enb		: 1;
+		uint64_t bist_enb		: 1;
+		uint64_t tdata_sel		: 1;
+		uint64_t taddr_in		: 4;
+		uint64_t tdata_in		: 8;
+		uint64_t ate_reset		: 1;
+	} s;
+};
+
+#endif /* __OCTEON_HCD_H__ */
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index e14a1bb..0315f60 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -72,7 +72,7 @@
 	int baseline_cores;
 	/*
 	 * The number of additional cores that could be processing
-	 * input packtes.
+	 * input packets.
 	 */
 	atomic_t available_cores;
 	cpumask_t cpu_state;
@@ -80,6 +80,8 @@
 
 static struct cvm_oct_core_state core_state __cacheline_aligned_in_smp;
 
+static int cvm_irq_cpu;
+
 static void cvm_oct_enable_napi(void *_)
 {
 	int cpu = smp_processor_id();
@@ -112,11 +114,7 @@
 {
 	int cpu = smp_processor_id();
 
-	/*
-	 * CPU zero is special.  It always has the irq enabled when
-	 * waiting for incoming packets.
-	 */
-	if (cpu == 0) {
+	if (cpu == cvm_irq_cpu) {
 		enable_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group);
 		return;
 	}
@@ -135,6 +133,7 @@
 {
 	/* Disable the IRQ and start napi_poll. */
 	disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+	cvm_irq_cpu = smp_processor_id();
 	cvm_oct_enable_napi(NULL);
 
 	return IRQ_HANDLED;
@@ -514,7 +513,7 @@
 	if (NULL == dev_for_napi)
 		panic("No net_devices were allocated.");
 
-	if (max_rx_cpus > 1  && max_rx_cpus < num_online_cpus())
+	if (max_rx_cpus >= 1 && max_rx_cpus < num_online_cpus())
 		atomic_set(&core_state.available_cores, max_rx_cpus);
 	else
 		atomic_set(&core_state.available_cores, num_online_cpus());
@@ -526,7 +525,7 @@
 			       cvm_oct_napi_poll, rx_napi_weight);
 		napi_enable(&cvm_oct_napi[i].napi);
 	}
-	/* Register an IRQ hander for to receive POW interrupts */
+	/* Register an IRQ handler to receive POW interrupts */
 	i = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group,
 			cvm_oct_do_interrupt, 0, "Ethernet", cvm_oct_device);
 
diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c
index af8d628..5108bc0 100644
--- a/drivers/staging/octeon/ethernet-spi.c
+++ b/drivers/staging/octeon/ethernet-spi.c
@@ -64,31 +64,23 @@
 			if (spx_int_reg.s.spf)
 				pr_err("SPI1: SRX Spi4 interface down\n");
 			if (spx_int_reg.s.calerr)
-				pr_err("SPI1: SRX Spi4 Calendar table "
-				       "parity error\n");
+				pr_err("SPI1: SRX Spi4 Calendar table parity error\n");
 			if (spx_int_reg.s.syncerr)
-				pr_err("SPI1: SRX Consecutive Spi4 DIP4 "
-				       "errors have exceeded "
-				       "SPX_ERR_CTL[ERRCNT]\n");
+				pr_err("SPI1: SRX Consecutive Spi4 DIP4 errors have exceeded SPX_ERR_CTL[ERRCNT]\n");
 			if (spx_int_reg.s.diperr)
 				pr_err("SPI1: SRX Spi4 DIP4 error\n");
 			if (spx_int_reg.s.tpaovr)
-				pr_err("SPI1: SRX Selected port has hit "
-				       "TPA overflow\n");
+				pr_err("SPI1: SRX Selected port has hit TPA overflow\n");
 			if (spx_int_reg.s.rsverr)
-				pr_err("SPI1: SRX Spi4 reserved control "
-				       "word detected\n");
+				pr_err("SPI1: SRX Spi4 reserved control word detected\n");
 			if (spx_int_reg.s.drwnng)
-				pr_err("SPI1: SRX Spi4 receive FIFO "
-				       "drowning/overflow\n");
+				pr_err("SPI1: SRX Spi4 receive FIFO drowning/overflow\n");
 			if (spx_int_reg.s.clserr)
-				pr_err("SPI1: SRX Spi4 packet closed on "
-				       "non-16B alignment without EOP\n");
+				pr_err("SPI1: SRX Spi4 packet closed on non-16B alignment without EOP\n");
 			if (spx_int_reg.s.spiovr)
 				pr_err("SPI1: SRX Spi4 async FIFO overflow\n");
 			if (spx_int_reg.s.abnorm)
-				pr_err("SPI1: SRX Abnormal packet "
-				       "termination (ERR bit)\n");
+				pr_err("SPI1: SRX Abnormal packet termination (ERR bit)\n");
 			if (spx_int_reg.s.prtnxa)
 				pr_err("SPI1: SRX Port out of range\n");
 		}
@@ -99,31 +91,23 @@
 
 			stx_int_reg.u64 &= cvmx_read_csr(CVMX_STXX_INT_MSK(1));
 			if (stx_int_reg.s.syncerr)
-				pr_err("SPI1: STX Interface encountered a "
-				       "fatal error\n");
+				pr_err("SPI1: STX Interface encountered a fatal error\n");
 			if (stx_int_reg.s.frmerr)
-				pr_err("SPI1: STX FRMCNT has exceeded "
-				       "STX_DIP_CNT[MAXFRM]\n");
+				pr_err("SPI1: STX FRMCNT has exceeded STX_DIP_CNT[MAXFRM]\n");
 			if (stx_int_reg.s.unxfrm)
-				pr_err("SPI1: STX Unexpected framing "
-				       "sequence\n");
+				pr_err("SPI1: STX Unexpected framing sequence\n");
 			if (stx_int_reg.s.nosync)
-				pr_err("SPI1: STX ERRCNT has exceeded "
-				       "STX_DIP_CNT[MAXDIP]\n");
+				pr_err("SPI1: STX ERRCNT has exceeded STX_DIP_CNT[MAXDIP]\n");
 			if (stx_int_reg.s.diperr)
-				pr_err("SPI1: STX DIP2 error on the Spi4 "
-				       "Status channel\n");
+				pr_err("SPI1: STX DIP2 error on the Spi4 Status channel\n");
 			if (stx_int_reg.s.datovr)
 				pr_err("SPI1: STX Spi4 FIFO overflow error\n");
 			if (stx_int_reg.s.ovrbst)
-				pr_err("SPI1: STX Transmit packet burst "
-				       "too big\n");
+				pr_err("SPI1: STX Transmit packet burst too big\n");
 			if (stx_int_reg.s.calpar1)
-				pr_err("SPI1: STX Calendar Table Parity "
-				       "Error Bank1\n");
+				pr_err("SPI1: STX Calendar Table Parity Error Bank1\n");
 			if (stx_int_reg.s.calpar0)
-				pr_err("SPI1: STX Calendar Table Parity "
-				       "Error Bank0\n");
+				pr_err("SPI1: STX Calendar Table Parity Error Bank0\n");
 		}
 
 		cvmx_write_csr(CVMX_SPXX_INT_MSK(1), 0);
@@ -144,31 +128,23 @@
 			if (spx_int_reg.s.spf)
 				pr_err("SPI0: SRX Spi4 interface down\n");
 			if (spx_int_reg.s.calerr)
-				pr_err("SPI0: SRX Spi4 Calendar table "
-				       "parity error\n");
+				pr_err("SPI0: SRX Spi4 Calendar table parity error\n");
 			if (spx_int_reg.s.syncerr)
-				pr_err("SPI0: SRX Consecutive Spi4 DIP4 "
-				       "errors have exceeded "
-				       "SPX_ERR_CTL[ERRCNT]\n");
+				pr_err("SPI0: SRX Consecutive Spi4 DIP4 errors have exceeded SPX_ERR_CTL[ERRCNT]\n");
 			if (spx_int_reg.s.diperr)
 				pr_err("SPI0: SRX Spi4 DIP4 error\n");
 			if (spx_int_reg.s.tpaovr)
-				pr_err("SPI0: SRX Selected port has hit "
-				       "TPA overflow\n");
+				pr_err("SPI0: SRX Selected port has hit TPA overflow\n");
 			if (spx_int_reg.s.rsverr)
-				pr_err("SPI0: SRX Spi4 reserved control "
-				       "word detected\n");
+				pr_err("SPI0: SRX Spi4 reserved control word detected\n");
 			if (spx_int_reg.s.drwnng)
-				pr_err("SPI0: SRX Spi4 receive FIFO "
-				       "drowning/overflow\n");
+				pr_err("SPI0: SRX Spi4 receive FIFO drowning/overflow\n");
 			if (spx_int_reg.s.clserr)
-				pr_err("SPI0: SRX Spi4 packet closed on "
-				       "non-16B alignment without EOP\n");
+				pr_err("SPI0: SRX Spi4 packet closed on non-16B alignment without EOP\n");
 			if (spx_int_reg.s.spiovr)
 				pr_err("SPI0: SRX Spi4 async FIFO overflow\n");
 			if (spx_int_reg.s.abnorm)
-				pr_err("SPI0: SRX Abnormal packet "
-				       "termination (ERR bit)\n");
+				pr_err("SPI0: SRX Abnormal packet termination (ERR bit)\n");
 			if (spx_int_reg.s.prtnxa)
 				pr_err("SPI0: SRX Port out of range\n");
 		}
@@ -179,31 +155,23 @@
 
 			stx_int_reg.u64 &= cvmx_read_csr(CVMX_STXX_INT_MSK(0));
 			if (stx_int_reg.s.syncerr)
-				pr_err("SPI0: STX Interface encountered a "
-				       "fatal error\n");
+				pr_err("SPI0: STX Interface encountered a fatal error\n");
 			if (stx_int_reg.s.frmerr)
-				pr_err("SPI0: STX FRMCNT has exceeded "
-				       "STX_DIP_CNT[MAXFRM]\n");
+				pr_err("SPI0: STX FRMCNT has exceeded STX_DIP_CNT[MAXFRM]\n");
 			if (stx_int_reg.s.unxfrm)
-				pr_err("SPI0: STX Unexpected framing "
-				       "sequence\n");
+				pr_err("SPI0: STX Unexpected framing sequence\n");
 			if (stx_int_reg.s.nosync)
-				pr_err("SPI0: STX ERRCNT has exceeded "
-				       "STX_DIP_CNT[MAXDIP]\n");
+				pr_err("SPI0: STX ERRCNT has exceeded STX_DIP_CNT[MAXDIP]\n");
 			if (stx_int_reg.s.diperr)
-				pr_err("SPI0: STX DIP2 error on the Spi4 "
-				       "Status channel\n");
+				pr_err("SPI0: STX DIP2 error on the Spi4 Status channel\n");
 			if (stx_int_reg.s.datovr)
 				pr_err("SPI0: STX Spi4 FIFO overflow error\n");
 			if (stx_int_reg.s.ovrbst)
-				pr_err("SPI0: STX Transmit packet burst "
-				       "too big\n");
+				pr_err("SPI0: STX Transmit packet burst too big\n");
 			if (stx_int_reg.s.calpar1)
-				pr_err("SPI0: STX Calendar Table Parity "
-				       "Error Bank1\n");
+				pr_err("SPI0: STX Calendar Table Parity Error Bank1\n");
 			if (stx_int_reg.s.calpar0)
-				pr_err("SPI0: STX Calendar Table Parity "
-				       "Error Bank0\n");
+				pr_err("SPI0: STX Calendar Table Parity Error Bank0\n");
 		}
 
 		cvmx_write_csr(CVMX_SPXX_INT_MSK(0), 0);
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 5631dd9..9b4d0b5 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -78,10 +78,12 @@
 static inline int32_t cvm_oct_adjust_skb_to_free(int32_t skb_to_free, int fau)
 {
 	int32_t undo;
-	undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
+	undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free +
+						   MAX_SKB_TO_FREE;
 	if (undo > 0)
 		cvmx_fau_atomic_add32(fau, -undo);
-	skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE : -skb_to_free;
+	skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE :
+						       -skb_to_free;
 	return skb_to_free;
 }
 
@@ -108,8 +110,10 @@
 	for (qos = 0; qos < queues_per_port; qos++) {
 		if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
 			continue;
-		skb_to_free = cvmx_fau_fetch_and_add32(priv->fau+qos*4, MAX_SKB_TO_FREE);
-		skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4);
+		skb_to_free = cvmx_fau_fetch_and_add32(priv->fau+qos*4,
+						       MAX_SKB_TO_FREE);
+		skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,
+							 priv->fau+qos*4);
 
 
 		total_freed += skb_to_free;
@@ -117,12 +121,14 @@
 			struct sk_buff *to_free_list = NULL;
 			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
 			while (skb_to_free > 0) {
-				struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
+				struct sk_buff *t;
+				t = __skb_dequeue(&priv->tx_free_list[qos]);
 				t->next = to_free_list;
 				to_free_list = t;
 				skb_to_free--;
 			}
-			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock,
+					       flags);
 			/* Do the actual freeing outside of the lock. */
 			while (to_free_list) {
 				struct sk_buff *t = to_free_list;
@@ -211,15 +217,23 @@
 		if (unlikely(__skb_linearize(skb))) {
 			queue_type = QUEUE_DROP;
 			if (USE_ASYNC_IOBDMA) {
-				/* Get the number of skbuffs in use by the hardware */
+				/*
+				 * Get the number of skbuffs in use
+				 * by the hardware
+				 */
 				CVMX_SYNCIOBDMA;
-				skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+				skb_to_free =
+					cvmx_scratch_read64(CVMX_SCR_SCRATCH);
 			} else {
-				/* Get the number of skbuffs in use by the hardware */
-				skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
-								       MAX_SKB_TO_FREE);
+				/*
+				 * Get the number of skbuffs in use
+				 * by the hardware
+				 */
+				skb_to_free = cvmx_fau_fetch_and_add32(
+					priv->fau + qos * 4, MAX_SKB_TO_FREE);
 			}
-			skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau + qos * 4);
+			skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,
+							priv->fau + qos * 4);
 			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
 			goto skip_xmit;
 		}
@@ -276,7 +290,9 @@
 		CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
-			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
+			hw_buffer.s.addr = XKPHYS_TO_PHYS(
+				(u64)(page_address(fs->page.p) +
+				fs->page_offset));
 			hw_buffer.s.size = fs->size;
 			CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
 		}
@@ -358,7 +374,9 @@
 	 */
 	pko_command.s.dontfree = 0;
 
-	hw_buffer.s.back = ((unsigned long)skb->data >> 7) - ((unsigned long)fpa_head >> 7);
+	hw_buffer.s.back = ((unsigned long)skb->data >> 7) -
+			   ((unsigned long)fpa_head >> 7);
+
 	*(struct sk_buff **)(fpa_head - sizeof(void *)) = skb;
 
 	/*
@@ -422,17 +440,22 @@
 		queue_type = QUEUE_HW;
 	}
 	if (USE_ASYNC_IOBDMA)
-		cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1);
+		cvmx_fau_async_fetch_and_add32(
+				CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1);
 
 	spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
 
 	/* Drop this packet if we have too many already queued to the HW */
-	if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
+	if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >=
+		     MAX_OUT_QUEUE_DEPTH)) {
+
 		if (dev->tx_queue_len != 0) {
 			/* Drop the lock when notifying the core.  */
-			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock,
+					       flags);
 			netif_stop_queue(dev);
-			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+			spin_lock_irqsave(&priv->tx_free_list[qos].lock,
+					  flags);
 		} else {
 			/* If not using normal queueing.  */
 			queue_type = QUEUE_DROP;
@@ -448,7 +471,8 @@
 						 priv->queue + qos,
 						 pko_command, hw_buffer,
 						 CVMX_PKO_LOCK_NONE))) {
-		printk_ratelimited("%s: Failed to send the packet\n", dev->name);
+		printk_ratelimited("%s: Failed to send the packet\n",
+				   dev->name);
 		queue_type = QUEUE_DROP;
 	}
 skip_xmit:
@@ -493,7 +517,8 @@
 		cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
 		cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
 	} else {
-		total_to_clean = cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1);
+		total_to_clean = cvmx_fau_fetch_and_add32(
+						FAU_TOTAL_TX_TO_CLEAN, 1);
 	}
 
 	if (total_to_clean & 0x3ff) {
@@ -527,8 +552,8 @@
 	/* Get a work queue entry */
 	cvmx_wqe_t *work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL);
 	if (unlikely(work == NULL)) {
-		printk_ratelimited("%s: Failed to allocate a work "
-				   "queue entry\n", dev->name);
+		printk_ratelimited("%s: Failed to allocate a work queue entry\n",
+				   dev->name);
 		priv->stats.tx_dropped++;
 		dev_kfree_skb(skb);
 		return 0;
@@ -709,7 +734,7 @@
 
 	/* Disable the interrupt.  */
 	cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
-	/* Register an IRQ hander for to receive CIU_TIMX(1) interrupts */
+	/* Register an IRQ handler to receive CIU_TIMX(1) interrupts */
 	i = request_irq(OCTEON_IRQ_TIMER1,
 			cvm_oct_tx_cleanup_watchdog, 0,
 			"Ethernet", cvm_oct_device);
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index c3a90e7..bd6ca71 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -163,11 +163,13 @@
 	if (priv->poll)
 		priv->poll(cvm_oct_device[priv->port]);
 
-	cvm_oct_device[priv->port]->netdev_ops->ndo_get_stats(cvm_oct_device[priv->port]);
+	cvm_oct_device[priv->port]->netdev_ops->ndo_get_stats(
+						cvm_oct_device[priv->port]);
 
 	if (!atomic_read(&cvm_oct_poll_queue_stopping))
-		queue_delayed_work(cvm_oct_poll_queue, &priv->port_periodic_work, HZ);
- }
+		queue_delayed_work(cvm_oct_poll_queue,
+						&priv->port_periodic_work, HZ);
+}
 
 static void cvm_oct_configure_common_hw(void)
 {
@@ -453,7 +455,7 @@
 	if (priv->of_node)
 		mac = of_get_mac_address(priv->of_node);
 
-	if (mac && is_valid_ether_addr(mac))
+	if (mac)
 		memcpy(dev->dev_addr, mac, ETH_ALEN);
 	else
 		eth_hw_addr_random(dev);
@@ -584,8 +586,8 @@
 
 extern void octeon_mdiobus_force_mod_depencency(void);
 
-static struct device_node *cvm_oct_of_get_child(const struct device_node *parent,
-							   int reg_val)
+static struct device_node *cvm_oct_of_get_child(
+				const struct device_node *parent, int reg_val)
 {
 	struct device_node *node = NULL;
 	int size;
@@ -603,7 +605,7 @@
 }
 
 static struct device_node *cvm_oct_node_for_port(struct device_node *pip,
-							    int interface, int port)
+							int interface, int port)
 {
 	struct device_node *ni, *np;
 
@@ -713,7 +715,8 @@
 		int port;
 		int port_index;
 
-		for (port_index = 0, port = cvmx_helper_get_ipd_port(interface, 0);
+		for (port_index = 0,
+		     port = cvmx_helper_get_ipd_port(interface, 0);
 		     port < cvmx_helper_get_ipd_port(interface, num_ports);
 		     port_index++, port++) {
 			struct octeon_ethernet *priv;
@@ -726,7 +729,8 @@
 
 			/* Initialize the device private structure. */
 			priv = netdev_priv(dev);
-			priv->of_node = cvm_oct_node_for_port(pip, interface, port_index);
+			priv->of_node = cvm_oct_node_for_port(pip, interface,
+								port_index);
 
 			INIT_DELAYED_WORK(&priv->port_periodic_work,
 					  cvm_oct_periodic_worker);
@@ -793,7 +797,7 @@
 				    cvmx_pko_get_num_queues(priv->port) *
 				    sizeof(uint32_t);
 				queue_delayed_work(cvm_oct_poll_queue,
-						   &priv->port_periodic_work, HZ);
+						&priv->port_periodic_work, HZ);
 			}
 		}
 	}
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index 2ff015d..d277f04 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -1,7 +1,8 @@
 config FB_OLPC_DCON
 	tristate "One Laptop Per Child Display CONtroller support"
 	depends on OLPC && FB
-	select I2C
+	depends on I2C
+	depends on (GPIO_CS5535 || GPIO_CS5535=n)
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  In order to support very low power operation, the XO laptop uses a
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index 198595e..92b0289 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -383,7 +383,7 @@
 
 	dcon->pending_src = arg;
 
-	if ((dcon->curr_src != arg) && !work_pending(&dcon->switch_source))
+	if (dcon->curr_src != arg)
 		schedule_work(&dcon->switch_source);
 }
 
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index 4247d60..9f6ebdb 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -390,10 +390,6 @@
 {
 	int ret;
 
-	/* ACPI Check */
-	if (acpi_disabled)
-		return -ENODEV;
-
 	/* ACPI driver register */
 	ret = acpi_bus_register_driver(&quickstart_acpi_driver);
 	if (ret)
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
index 10b2210..3045790 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -858,7 +858,7 @@
 
 }
 
-int
+static int
 ieee80211_TranslateToDbm(
 	unsigned char SignalStrengthIndex	// 0-100 index.
 	)
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index b65db54..0290706 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -887,7 +887,8 @@
 	return skb;
 }
 
-struct sk_buff* ieee80211_assoc_resp(struct ieee80211_device *ieee, u8 *dest)
+static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee,
+					    u8 *dest)
 {
 	struct sk_buff *skb;
 	u8* tag;
@@ -940,7 +941,8 @@
 	return skb;
 }
 
-struct sk_buff* ieee80211_auth_resp(struct ieee80211_device *ieee,int status, u8 *dest)
+static struct sk_buff *ieee80211_auth_resp(struct ieee80211_device *ieee,
+					   int status, u8 *dest)
 {
 	struct sk_buff *skb;
 	struct ieee80211_authentication *auth;
@@ -2942,14 +2944,9 @@
 		goto out;
 	}
 
-	param = kmalloc(p->length, GFP_KERNEL);
-	if (param == NULL){
-		ret = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(param, p->pointer, p->length)) {
-		kfree(param);
-		ret = -EFAULT;
+	param = memdup_user(p->pointer, p->length);
+	if (IS_ERR(param)) {
+		ret = PTR_ERR(param);
 		goto out;
 	}
 
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
index b346653..f5a5219 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
@@ -32,7 +32,6 @@
 ******************************************************************************/
 
 #include <linux/compiler.h>
-//#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/if_arp.h>
 #include <linux/in6.h>
@@ -186,9 +185,12 @@
 	struct ieee80211_crypt_data* crypt = ieee->crypt[ieee->tx_keyidx];
 	int res;
 
- /*added to care about null crypt condition, to solve that system hangs when shared keys error*/
-        if (!crypt || !crypt->ops)
-        return -1;
+	/*
+	 * added to care about null crypt condition, to solve that system hangs
+	 * when shared keys error
+	 */
+	if (!crypt || !crypt->ops)
+		return -1;
 
 #ifdef CONFIG_IEEE80211_CRYPT_TKIP
 	struct ieee80211_hdr_4addr *header;
@@ -197,19 +199,22 @@
 	    crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
 		header = (struct ieee80211_hdr_4addr *)frag->data;
 		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
-			       "TX packet to %pM\n",
-			       ieee->dev->name, header->addr1);
+			netdev_dbg(ieee->dev, "TKIP countermeasures: dropped "
+			       "TX packet to %pM\n", header->addr1);
 		}
 		return -1;
 	}
 #endif
-	/* To encrypt, frame format is:
-	 * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */
-
-	// PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
-	/* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
-	 * call both MSDU and MPDU encryption functions from here. */
+	/*
+	 * To encrypt, frame format is:
+	 * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes)
+	 *
+	 * PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU
+	 * encryption.
+	 *
+	 * Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
+	 * call both MSDU and MPDU encryption functions from here.
+	 */
 	atomic_inc(&crypt->refcnt);
 	res = 0;
 	if (crypt->ops->encrypt_msdu)
@@ -219,8 +224,7 @@
 
 	atomic_dec(&crypt->refcnt);
 	if (res < 0) {
-		printk(KERN_INFO "%s: Encryption failed: len=%d.\n",
-		       ieee->dev->name, frag->len);
+		netdev_info(ieee->dev, "Encryption failed: len=%d.\n", frag->len);
 		ieee->ieee_stats.tx_discards++;
 		return -1;
 	}
@@ -229,7 +233,8 @@
 }
 
 
-void ieee80211_txb_free(struct ieee80211_txb *txb) {
+void ieee80211_txb_free(struct ieee80211_txb *txb)
+{
 	int i;
 	if (unlikely(!txb))
 		return;
@@ -239,13 +244,13 @@
 	kfree(txb);
 }
 
-struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
-					  int gfp_mask)
+static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
+						 gfp_t gfp_mask)
 {
 	struct ieee80211_txb *txb;
 	int i;
 	txb = kmalloc(
-		sizeof(struct ieee80211_txb) + (sizeof(u8*) * nr_frags),
+		sizeof(struct ieee80211_txb) + (sizeof(u8 *) * nr_frags),
 		gfp_mask);
 	if (!txb)
 		return NULL;
@@ -270,42 +275,43 @@
 	return txb;
 }
 
-// Classify the to-be send data packet
-// Need to acquire the sent queue index.
+/*
+ * Classify the to-be send data packet
+ * Need to acquire the sent queue index.
+ */
 static int
 ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network)
 {
-  struct ether_header *eh = (struct ether_header*)skb->data;
-  unsigned int wme_UP = 0;
+	struct ether_header *eh = (struct ether_header *)skb->data;
+	unsigned int wme_UP = 0;
 
-  if(!network->QoS_Enable) {
-     skb->priority = 0;
-     return(wme_UP);
-  }
+	if (!network->QoS_Enable) {
+		skb->priority = 0;
+		return(wme_UP);
+	}
 
-  if(eh->ether_type == __constant_htons(ETHERTYPE_IP)) {
-    const struct iphdr *ih = (struct iphdr*)(skb->data + \
+	if (eh->ether_type == __constant_htons(ETHERTYPE_IP)) {
+		const struct iphdr *ih = (struct iphdr *)(skb->data +
 		    sizeof(struct ether_header));
-    wme_UP = (ih->tos >> 5)&0x07;
-  } else if (vlan_tx_tag_present(skb)) {//vtag packet
+		wme_UP = (ih->tos >> 5)&0x07;
+	} else if (vlan_tx_tag_present(skb)) {/* vtag packet */
 #ifndef VLAN_PRI_SHIFT
 #define VLAN_PRI_SHIFT  13              /* Shift to find VLAN user priority */
 #define VLAN_PRI_MASK   7               /* Mask for user priority bits in VLAN */
 #endif
-	u32 tag = vlan_tx_tag_get(skb);
-	wme_UP = (tag >> VLAN_PRI_SHIFT) & VLAN_PRI_MASK;
-  } else if(ETH_P_PAE ==  ntohs(((struct ethhdr *)skb->data)->h_proto)) {
-    //printk(KERN_WARNING "type = normal packet\n");
-    wme_UP = 7;
-  }
+		u32 tag = vlan_tx_tag_get(skb);
+		wme_UP = (tag >> VLAN_PRI_SHIFT) & VLAN_PRI_MASK;
+	} else if (ETH_P_PAE ==  ntohs(((struct ethhdr *)skb->data)->h_proto)) {
+		wme_UP = 7;
+	}
 
-  skb->priority = wme_UP;
-  return(wme_UP);
+	skb->priority = wme_UP;
+	return(wme_UP);
 }
 
 /* SKBs are added to the ieee->tx_queue. */
 int ieee80211_rtl_xmit(struct sk_buff *skb,
-		   struct net_device *dev)
+		       struct net_device *dev)
 {
 	struct ieee80211_device *ieee = netdev_priv(dev);
 	struct ieee80211_txb *txb = NULL;
@@ -325,24 +331,25 @@
 
 	struct ieee80211_crypt_data* crypt;
 
-	//printk(KERN_WARNING "upper layer packet!\n");
 	spin_lock_irqsave(&ieee->lock, flags);
 
-	/* If there is no driver handler to take the TXB, don't bother
-	 * creating it... */
-	if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
-	   ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
-		printk(KERN_WARNING "%s: No xmit handler.\n",
-		       ieee->dev->name);
+	/*
+	 * If there is no driver handler to take the TXB, don't bother
+	 * creating it...
+	 */
+	if ((!ieee->hard_start_xmit &&
+	     !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)) ||
+	    ((!ieee->softmac_data_hard_start_xmit &&
+	      (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
+		netdev_warn(ieee->dev, "No xmit handler.\n");
 		goto success;
 	}
 
 	ieee80211_classify(skb,&ieee->current_network);
-	if(likely(ieee->raw_tx == 0)){
+	if (likely(ieee->raw_tx == 0)){
 
 		if (unlikely(skb->len < SNAP_SIZE + sizeof(u16))) {
-			printk(KERN_WARNING "%s: skb too small (%d).\n",
-			ieee->dev->name, skb->len);
+			netdev_warn(ieee->dev, "skb too small (%d).\n", skb->len);
 			goto success;
 		}
 
@@ -378,7 +385,7 @@
 		/* Determine total amount of storage required for TXB packets */
 		bytes = skb->len + SNAP_SIZE + sizeof(u16);
 
-		if(ieee->current_network.QoS_Enable) {
+		if (ieee->current_network.QoS_Enable) {
 			if (encrypt)
 				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA |
 					IEEE80211_FCTL_WEP;
@@ -395,31 +402,31 @@
 
 		if (ieee->iw_mode == IW_MODE_INFRA) {
 			fc |= IEEE80211_FCTL_TODS;
-			/* To DS: Addr1 = BSSID, Addr2 = SA,
-			Addr3 = DA */
+			/* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
 			memcpy(&header.addr1, ieee->current_network.bssid, ETH_ALEN);
 			memcpy(&header.addr2, &src, ETH_ALEN);
 			memcpy(&header.addr3, &dest, ETH_ALEN);
 		} else if (ieee->iw_mode == IW_MODE_ADHOC) {
-			/* not From/To DS: Addr1 = DA, Addr2 = SA,
-			Addr3 = BSSID */
+			/*
+			 * not From/To DS: Addr1 = DA, Addr2 = SA,
+			 * Addr3 = BSSID
+			 */
 			memcpy(&header.addr1, dest, ETH_ALEN);
 			memcpy(&header.addr2, src, ETH_ALEN);
 			memcpy(&header.addr3, ieee->current_network.bssid, ETH_ALEN);
 		}
-	//	printk(KERN_WARNING "essid MAC address is %pM", &header.addr1);
 		header.frame_ctl = cpu_to_le16(fc);
-		//hdr_len = IEEE80211_3ADDR_LEN;
 
-		/* Determine fragmentation size based on destination (multicast
-		* and broadcast are not fragmented) */
+		/*
+		 * Determine fragmentation size based on destination (multicast
+		 * and broadcast are not fragmented)
+		 */
 		if (is_multicast_ether_addr(header.addr1)) {
 			frag_size = MAX_FRAG_THRESHOLD;
 			qos_ctl = QOS_CTL_NOTCONTAIN_ACK;
-		}
-		else {
-			//printk(KERN_WARNING "&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&frag_size = %d\n", frag_size);
-			frag_size = ieee->fts;//default:392
+		} else {
+			/* default:392 */
+			frag_size = ieee->fts;
 			qos_ctl = 0;
 		}
 
@@ -432,11 +439,12 @@
 			hdr_len = IEEE80211_3ADDR_LEN;
 		}
 
-		/* Determine amount of payload per fragment.  Regardless of if
-		* this stack is providing the full 802.11 header, one will
-		* eventually be affixed to this fragment -- so we must account for
-		* it when determining the amount of payload space. */
-		//bytes_per_frag = frag_size - (IEEE80211_3ADDR_LEN + (ieee->current_network->QoS_Enable ? 2:0));
+		/*
+		 * Determine amount of payload per fragment.  Regardless of if
+		 * this stack is providing the full 802.11 header, one will
+		 * eventually be affixed to this fragment -- so we must account
+		 * for it when determining the amount of payload space.
+		 */
 		bytes_per_frag = frag_size - hdr_len;
 		if (ieee->config &
 		(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
@@ -447,8 +455,10 @@
 			bytes_per_frag -= crypt->ops->extra_prefix_len +
 				crypt->ops->extra_postfix_len;
 
-		/* Number of fragments is the total bytes_per_frag /
-		* payload_per_fragment */
+		/*
+		 * Number of fragments is the total bytes_per_frag /
+		 * payload_per_fragment
+		 */
 		nr_frags = bytes / bytes_per_frag;
 		bytes_last_frag = bytes % bytes_per_frag;
 		if (bytes_last_frag)
@@ -456,13 +466,14 @@
 		else
 			bytes_last_frag = bytes_per_frag;
 
-		/* When we allocate the TXB we allocate enough space for the reserve
-		* and full fragment bytes (bytes_per_frag doesn't include prefix,
-		* postfix, header, FCS, etc.) */
+		/*
+		 * When we allocate the TXB we allocate enough space for the 
+		 * reserve and full fragment bytes (bytes_per_frag doesn't
+		 * include prefix, postfix, header, FCS, etc.)
+		 */
 		txb = ieee80211_alloc_txb(nr_frags, frag_size, GFP_ATOMIC);
 		if (unlikely(!txb)) {
-			printk(KERN_WARNING "%s: Could not allocate TXB\n",
-			ieee->dev->name);
+			netdev_warn(ieee->dev, "Could not allocate TXB\n");
 			goto failed;
 		}
 		txb->encrypted = encrypt;
@@ -474,11 +485,14 @@
 			if (encrypt)
 				skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
 
-			frag_hdr = (struct ieee80211_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
+			frag_hdr = (struct ieee80211_hdr_3addrqos *)skb_put(
+				skb_frag, hdr_len);
 			memcpy(frag_hdr, &header, hdr_len);
 
-			/* If this is not the last fragment, then add the MOREFRAGS
-			* bit to the frame control */
+			/*
+			 * If this is not the last fragment, then add the MOREFRAGS
+			 * bit to the frame control
+			 */
 			if (i != nr_frags - 1) {
 				frag_hdr->frame_ctl = cpu_to_le16(
 					fc | IEEE80211_FCTL_MOREFRAGS);
@@ -488,16 +502,17 @@
 				/* The last fragment takes the remaining length */
 				bytes = bytes_last_frag;
 			}
-			if(ieee->current_network.QoS_Enable) {
-			  // add 1 only indicate to corresponding seq number control 2006/7/12
-			  frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
-			  //printk(KERN_WARNING "skb->priority = %d,", skb->priority);
-			  //printk(KERN_WARNING "type:%d: seq = %d\n",UP2AC(skb->priority),ieee->seq_ctrl[UP2AC(skb->priority)+1]);
+			if (ieee->current_network.QoS_Enable) {
+				/*
+				 * add 1 only indicate to corresponding seq
+				 * number control 2006/7/12
+				 */
+				frag_hdr->seq_ctl = cpu_to_le16(
+					ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
 			} else {
-			  frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0]<<4 | i);
+				frag_hdr->seq_ctl = cpu_to_le16(
+					ieee->seq_ctrl[0]<<4 | i);
 			}
-			//frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl<<4 | i);
-			//
 
 			/* Put a SNAP header on the first fragment */
 			if (i == 0) {
@@ -512,54 +527,53 @@
 			/* Advance the SKB... */
 			skb_pull(skb, bytes);
 
-			/* Encryption routine will move the header forward in order
-			* to insert the IV between the header and the payload */
+			/*
+			 * Encryption routine will move the header forward in
+			 * order to insert the IV between the header and the
+			 * payload
+			 */
 			if (encrypt)
 				ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
 			if (ieee->config &
 			(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
 				skb_put(skb_frag, 4);
 		}
-		// Advance sequence number in data frame.
-		//printk(KERN_WARNING "QoS Enalbed? %s\n", ieee->current_network.QoS_Enable?"Y":"N");
+		/* Advance sequence number in data frame. */
 		if (ieee->current_network.QoS_Enable) {
-		  if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
-			ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
-		  else
-			ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
+			if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
+				ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
+			else
+				ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
 		} else {
-  		  if (ieee->seq_ctrl[0] == 0xFFF)
-			ieee->seq_ctrl[0] = 0;
-		  else
-			ieee->seq_ctrl[0]++;
+			if (ieee->seq_ctrl[0] == 0xFFF)
+				ieee->seq_ctrl[0] = 0;
+			else
+				ieee->seq_ctrl[0]++;
 		}
-		//---
-	}else{
+	} else {
 		if (unlikely(skb->len < sizeof(struct ieee80211_hdr_3addr))) {
-			printk(KERN_WARNING "%s: skb too small (%d).\n",
-			ieee->dev->name, skb->len);
+			netdev_warn(ieee->dev, "skb too small (%d).\n", skb->len);
 			goto success;
 		}
 
 		txb = ieee80211_alloc_txb(1, skb->len, GFP_ATOMIC);
-		if(!txb){
-			printk(KERN_WARNING "%s: Could not allocate TXB\n",
-			ieee->dev->name);
+		if (!txb) {
+			netdev_warn(ieee->dev, "Could not allocate TXB\n");
 			goto failed;
 		}
 
 		txb->encrypted = 0;
 		txb->payload_size = skb->len;
-		memcpy(skb_put(txb->fragments[0],skb->len), skb->data, skb->len);
+		memcpy(skb_put(txb->fragments[0], skb->len), skb->data, skb->len);
 	}
 
  success:
 	spin_unlock_irqrestore(&ieee->lock, flags);
 		dev_kfree_skb_any(skb);
 	if (txb) {
-		if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE){
+		if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE) {
 			ieee80211_softmac_xmit(txb, ieee);
-		}else{
+		} else {
 			if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
 				stats->tx_packets++;
 				stats->tx_bytes += txb->payload_size;
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
index e014f7e..24d39cc 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -145,7 +145,8 @@
 	/* Add quality statistics */
 	/* TODO: Fix these values... */
 	if (network->stats.signal == 0 || network->stats.rssi == 0)
-	printk("========>signal:%d, rssi:%d\n", network->stats.signal, network->stats.rssi);
+		printk("========>signal:%d, rssi:%d\n", network->stats.signal,
+		       network->stats.rssi);
 	iwe.cmd = IWEVQUAL;
 //	printk("SIGNAL: %d,RSSI: %d,NOISE: %d\n",network->stats.signal,network->stats.rssi,network->stats.noise);
 	iwe.u.qual.qual = network->stats.signalstrength;
@@ -622,7 +623,7 @@
 	if (ieee->set_security)
 		ieee->set_security(ieee->dev, &sec);
 
-	 if (ieee->reset_on_keychange &&
+	if (ieee->reset_on_keychange &&
 	    ieee->iw_mode != IW_MODE_INFRA &&
 	    ieee->reset_port && ieee->reset_port(dev)) {
 		IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 5947a6f8..76a6738 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -160,34 +160,34 @@
 
 u8 read_nic_byte(struct net_device *dev, int x)
 {
-	return 0xff&readb((u8 *)dev->mem_start + x);
+	return 0xff&readb((u8 __iomem *)dev->mem_start + x);
 }
 
 u32 read_nic_dword(struct net_device *dev, int x)
 {
-	return readl((u8 *)dev->mem_start + x);
+	return readl((u8 __iomem *)dev->mem_start + x);
 }
 
 u16 read_nic_word(struct net_device *dev, int x)
 {
-	return readw((u8 *)dev->mem_start + x);
+	return readw((u8 __iomem *)dev->mem_start + x);
 }
 
 void write_nic_byte(struct net_device *dev, int x, u8 y)
 {
-	writeb(y, (u8 *)dev->mem_start + x);
+	writeb(y, (u8 __iomem *)dev->mem_start + x);
 	udelay(20);
 }
 
 void write_nic_dword(struct net_device *dev, int x, u32 y)
 {
-	writel(y, (u8 *)dev->mem_start + x);
+	writel(y, (u8 __iomem *)dev->mem_start + x);
 	udelay(20);
 }
 
 void write_nic_word(struct net_device *dev, int x, u16 y)
 {
-	writew(y, (u8 *)dev->mem_start + x);
+	writew(y, (u8 __iomem *)dev->mem_start + x);
 	udelay(20);
 }
 
@@ -275,18 +275,18 @@
 	return 0;
 }
 
-void rtl8180_proc_module_init(void)
+static void rtl8180_proc_module_init(void)
 {
 	DMESG("Initializing proc filesystem");
 	rtl8180_proc = proc_mkdir(RTL8180_MODULE_NAME, init_net.proc_net);
 }
 
-void rtl8180_proc_module_remove(void)
+static void rtl8180_proc_module_remove(void)
 {
 	remove_proc_entry(RTL8180_MODULE_NAME, init_net.proc_net);
 }
 
-void rtl8180_proc_remove_one(struct net_device *dev)
+static void rtl8180_proc_remove_one(struct net_device *dev)
 {
 	remove_proc_subtree(dev->name, rtl8180_proc);
 }
@@ -325,7 +325,7 @@
 	{ "" }
 };
 
-void rtl8180_proc_init_one(struct net_device *dev)
+static void rtl8180_proc_init_one(struct net_device *dev)
 {
 	const struct rtl8180_proc_file *f;
 	struct proc_dir_entry *dir;
@@ -351,8 +351,8 @@
   data type+functions in kernel
 */
 
-short buffer_add(struct buffer **buffer, u32 *buf, dma_addr_t dma,
-		struct buffer **bufferhead)
+static short buffer_add(struct buffer **buffer, u32 *buf, dma_addr_t dma,
+			struct buffer **bufferhead)
 {
 	struct buffer *tmp;
 
@@ -463,7 +463,7 @@
 	return ret;
 }
 
-short check_nic_enought_desc(struct net_device *dev, int priority)
+static short check_nic_enought_desc(struct net_device *dev, int priority)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	struct ieee80211_device *ieee = netdev_priv(dev);
@@ -589,7 +589,7 @@
 	set_nic_rxring(dev);
 }
 
-void rtl8180_irq_disable(struct net_device *dev)
+static void rtl8180_irq_disable(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
@@ -705,8 +705,8 @@
 		dev_kfree_skb_any(priv->rx_skb);
 }
 
-short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
-			 int addr)
+static short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
+				int addr)
 {
 	int i;
 	u32 *desc;
@@ -830,7 +830,7 @@
 	return 0;
 }
 
-void free_tx_desc_rings(struct net_device *dev)
+static void free_tx_desc_rings(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	struct pci_dev *pdev = priv->pdev;
@@ -866,7 +866,7 @@
 	buffer_free(dev, &(priv->txbeaconbufs), priv->txbuffsize, 1);
 }
 
-void free_rx_desc_ring(struct net_device *dev)
+static void free_rx_desc_ring(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	struct pci_dev *pdev = priv->pdev;
@@ -878,7 +878,7 @@
 	buffer_free(dev, &(priv->rxbuffer), priv->rxbuffersize, 0);
 }
 
-short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count)
+static short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count)
 {
 	int i;
 	u32 *desc;
@@ -1092,7 +1092,7 @@
 /*
  * For Netgear case, they want good-looking signal strength.
  */
-long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
+static long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
 {
 	long RetSS;
 
@@ -1128,7 +1128,7 @@
 /*
  * Translate 0-100 signal strength index into dBm.
  */
-long TranslateToDbm8185(u8 SignalStrengthIndex)
+static long TranslateToDbm8185(u8 SignalStrengthIndex)
 {
 	long SignalPower;
 
@@ -1145,8 +1145,8 @@
  * No dramatic adjustion is apply because dynamic mechanism need some degree
  * of correctness. Ported from 8187B.
  */
-void PerformUndecoratedSignalSmoothing8185(struct r8180_priv *priv,
-					   bool bCckRate)
+static void PerformUndecoratedSignalSmoothing8185(struct r8180_priv *priv,
+						  bool bCckRate)
 {
 	/* Determin the current packet is CCK rate. */
 	priv->bCurCCKPkt = bCckRate;
@@ -1170,7 +1170,7 @@
 /*
  * This is rough RX isr handling routine
  */
-void rtl8180_rx(struct net_device *dev)
+static void rtl8180_rx(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	struct sk_buff *tmp_skb;
@@ -1496,7 +1496,7 @@
 }
 
 
-void rtl8180_dma_kick(struct net_device *dev, int priority)
+static void rtl8180_dma_kick(struct net_device *dev, int priority)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
@@ -1508,7 +1508,7 @@
 	force_pci_posting(dev);
 }
 
-void rtl8180_data_hard_stop(struct net_device *dev)
+static void rtl8180_data_hard_stop(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
@@ -1518,7 +1518,7 @@
 	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
 }
 
-void rtl8180_data_hard_resume(struct net_device *dev)
+static void rtl8180_data_hard_resume(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
@@ -1532,8 +1532,9 @@
  * This function TX data frames when the ieee80211 stack requires this.
  * It checks also if we need to stop the ieee tx queue, eventually do it
  */
-void rtl8180_hard_data_xmit(struct sk_buff *skb, struct net_device *dev, int
-rate) {
+static void rtl8180_hard_data_xmit(struct sk_buff *skb, struct net_device *dev,
+				   int rate)
+{
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	int mode;
 	struct ieee80211_hdr_3addr *h = (struct ieee80211_hdr_3addr *) skb->data;
@@ -1584,7 +1585,7 @@
  * might use a different lock than tx_lock (for example mgmt_tx_lock)
  */
 /* these function may loop if invoked with 0 descriptors or 0 len buffer */
-int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	unsigned long flags;
@@ -1660,7 +1661,7 @@
 	return duration;
 }
 
-void rtl8180_prepare_beacon(struct net_device *dev)
+static void rtl8180_prepare_beacon(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	struct sk_buff *skb;
@@ -1704,7 +1705,7 @@
 	u16			RtsDur = 0;
 	u16			ThisFrameTime = 0;
 	u16			TxDescDuration = 0;
-	u8			ownbit_flag = false;
+	bool			ownbit_flag = false;
 
 	switch (priority) {
 	case MANAGE_PRIORITY:
@@ -1953,7 +1954,7 @@
 
 void rtl8180_irq_rx_tasklet(struct r8180_priv *priv);
 
-void rtl8180_link_change(struct net_device *dev)
+static void rtl8180_link_change(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	u16 beacon_interval;
@@ -1976,7 +1977,7 @@
 	rtl8180_set_chan(dev, priv->chan);
 }
 
-void rtl8180_rq_tx_ack(struct net_device *dev)
+static void rtl8180_rq_tx_ack(struct net_device *dev)
 {
 
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -1985,7 +1986,7 @@
 	priv->ack_tx_to_ieee = 1;
 }
 
-short rtl8180_is_tx_queue_empty(struct net_device *dev)
+static short rtl8180_is_tx_queue_empty(struct net_device *dev)
 {
 
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -2023,7 +2024,7 @@
 	return 1;
 }
 
-void rtl8180_hw_wakeup(struct net_device *dev)
+static void rtl8180_hw_wakeup(struct net_device *dev)
 {
 	unsigned long flags;
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -2035,7 +2036,7 @@
 	spin_unlock_irqrestore(&priv->ps_lock, flags);
 }
 
-void rtl8180_hw_sleep_down(struct net_device *dev)
+static void rtl8180_hw_sleep_down(struct net_device *dev)
 {
 	unsigned long flags;
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -2046,7 +2047,7 @@
 	spin_unlock_irqrestore(&priv->ps_lock, flags);
 }
 
-void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl)
+static void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	u32 rb = jiffies;
@@ -2093,7 +2094,7 @@
 	spin_unlock_irqrestore(&priv->ps_lock, flags);
 }
 
-void rtl8180_wmm_param_update(struct work_struct *work)
+static void rtl8180_wmm_param_update(struct work_struct *work)
 {
 	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wmm_param_update_wq);
 	struct net_device *dev = ieee->dev;
@@ -2195,7 +2196,7 @@
 void rtl8180_sw_antenna_wq(struct work_struct *work);
 void rtl8180_watch_dog(struct net_device *dev);
 
-void watch_dog_adaptive(unsigned long data)
+static void watch_dog_adaptive(unsigned long data)
 {
 	struct r8180_priv *priv = ieee80211_priv((struct net_device *)data);
 
@@ -2213,7 +2214,7 @@
 		TxPwrTracking87SE((struct net_device *)data);
 
 	/* Perform DIG immediately. */
-	if (CheckDig((struct net_device *)data) == true)
+	if (CheckDig((struct net_device *)data))
 		queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->hw_dig_wq);
 	rtl8180_watch_dog((struct net_device *)data);
 
@@ -2271,7 +2272,7 @@
 		}
 	case COUNTRY_CODE_GLOBAL_DOMAIN:
 		{
-			GET_DOT11D_INFO(ieee)->bEnabled = 0;
+			GET_DOT11D_INFO(ieee)->bEnabled = false;
 			Dot11d_Reset(ieee);
 			ieee->bGlobalDomain = true;
 			break;
@@ -2429,7 +2430,7 @@
 	init_timer(&priv->SwAntennaDiversityTimer);
 	priv->SwAntennaDiversityTimer.data = (unsigned long)dev;
 	priv->SwAntennaDiversityTimer.function = (void *)SwAntennaDiversityTimerCallback;
-	priv->bDigMechanism = 1;
+	priv->bDigMechanism = true;
 	priv->InitialGain = 6;
 	priv->bXtalCalibration = false;
 	priv->XtalCal_Xin = 0;
@@ -2548,7 +2549,7 @@
 				(priv->EarlyRxThreshold == 7 ?
 					 RCR_ONLYERLPKT : 0);
 
-	priv->IntrMask		= IMR_TMGDOK | IMR_TBDER | IMR_THPDER |
+	priv->IntrMask		= IMR_TMGDOK | IMR_TBDER |
 				  IMR_THPDER | IMR_THPDOK |
 				  IMR_TVODER | IMR_TVODOK |
 				  IMR_TVIDER | IMR_TVIDOK |
@@ -2757,7 +2758,7 @@
 	mdelay(1);
 }
 
-void rtl8185_write_phy(struct net_device *dev, u8 adr, u32 data)
+static void rtl8185_write_phy(struct net_device *dev, u8 adr, u32 data)
 {
 	u32 phyw;
 
@@ -2969,7 +2970,7 @@
 	priv->ieee80211->NumRxBcnInPeriod = 0;
 }
 
-int _rtl8180_up(struct net_device *dev)
+static int _rtl8180_up(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 
@@ -2991,7 +2992,7 @@
 	return 0;
 }
 
-int rtl8180_open(struct net_device *dev)
+static int rtl8180_open(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	int ret;
@@ -3012,7 +3013,7 @@
 	return _rtl8180_up(dev);
 }
 
-int rtl8180_close(struct net_device *dev)
+static int rtl8180_close(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	int ret;
@@ -3065,7 +3066,7 @@
 	up(&priv->wx_sem);
 }
 
-void rtl8180_restart(struct net_device *dev)
+static void rtl8180_restart(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 
@@ -3106,7 +3107,7 @@
 	priv->promisc = promisc;
 }
 
-int r8180_set_mac_adr(struct net_device *dev, void *mac)
+static int r8180_set_mac_adr(struct net_device *dev, void *mac)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	struct sockaddr *addr = mac;
@@ -3129,7 +3130,7 @@
 }
 
 /* based on ipw2200 driver */
-int rtl8180_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static int rtl8180_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	struct iwreq *wrq = (struct iwreq *) rq;
@@ -3251,7 +3252,7 @@
 	return 0;
 fail1:
 	if (dev->mem_start != (unsigned long)NULL) {
-		iounmap((void *)dev->mem_start);
+		iounmap((void __iomem *)dev->mem_start);
 		release_mem_region(pci_resource_start(pdev, 1),
 				   pci_resource_len(pdev, 1));
 	}
@@ -3268,7 +3269,6 @@
 	pci_disable_device(pdev);
 
 	DMESG("wlan driver load failed\n");
-	pci_set_drvdata(pdev, NULL);
 	return ret;
 }
 
@@ -3298,7 +3298,7 @@
 		free_tx_desc_rings(dev);
 
 		if (dev->mem_start != (unsigned long)NULL) {
-			iounmap((void *)dev->mem_start);
+			iounmap((void __iomem *)dev->mem_start);
 			release_mem_region(pci_resource_start(pdev, 1),
 					   pci_resource_len(pdev, 1));
 		}
@@ -3369,7 +3369,7 @@
 	DMESG("Exiting");
 }
 
-void rtl8180_try_wake_queue(struct net_device *dev, int pri)
+static void rtl8180_try_wake_queue(struct net_device *dev, int pri)
 {
 	unsigned long flags;
 	short enough_desc;
@@ -3383,7 +3383,7 @@
 		ieee80211_rtl_wake_queue(priv->ieee80211);
 }
 
-void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
+static void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	u32 *tail; /* tail virtual addr */
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index b8f2ba0..2ccd2cb 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -10,10 +10,10 @@
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	struct ieee80211_device *ieee = priv->ieee80211;
 
-	if(!priv->bRegHighPowerMechanism)
+	if (!priv->bRegHighPowerMechanism)
 		return false;
 
-	if(ieee->state == IEEE80211_LINKED_SCANNING)
+	if (ieee->state == IEEE80211_LINKED_SCANNING)
 		return false;
 
 	return true;
@@ -30,7 +30,7 @@
  *		and they are related to OFDM and MAC registers.
  *		So, we don't want to update it so frequently in per-Rx packet base.
  */
-void DoTxHighPower(struct net_device *dev)
+static void DoTxHighPower(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	u16			HiPwrUpperTh = 0;
@@ -57,15 +57,15 @@
 		/* Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah */
 
 		priv->bToUpdateTxPwr = true;
-		u1bTmp= read_nic_byte(dev, CCK_TXAGC);
+		u1bTmp = read_nic_byte(dev, CCK_TXAGC);
 
 		/* If it never enter High Power. */
 		if (CckTxPwrIdx == u1bTmp) {
-			u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0;  /* 8dbm */
+			u1bTmp = (u1bTmp > 16) ? (u1bTmp - 16) : 0;  /* 8dbm */
 			write_nic_byte(dev, CCK_TXAGC, u1bTmp);
 
-			u1bTmp= read_nic_byte(dev, OFDM_TXAGC);
-			u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0;  /* 8dbm */
+			u1bTmp = read_nic_byte(dev, OFDM_TXAGC);
+			u1bTmp = (u1bTmp > 16) ? (u1bTmp - 16) : 0;  /* 8dbm */
 			write_nic_byte(dev, OFDM_TXAGC, u1bTmp);
 		}
 
@@ -74,12 +74,12 @@
 		if (priv->bToUpdateTxPwr) {
 			priv->bToUpdateTxPwr = false;
 			/* SD3 required. */
-			u1bTmp= read_nic_byte(dev, CCK_TXAGC);
+			u1bTmp = read_nic_byte(dev, CCK_TXAGC);
 			if (u1bTmp < CckTxPwrIdx) {
 				write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx);
 			}
 
-			u1bTmp= read_nic_byte(dev, OFDM_TXAGC);
+			u1bTmp = read_nic_byte(dev, OFDM_TXAGC);
 			if (u1bTmp < OfdmTxPwrIdx) {
 				write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
 			}
@@ -97,7 +97,7 @@
 void rtl8180_tx_pw_wq(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,tx_pw_wq);
+	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, tx_pw_wq);
 	struct net_device *dev = ieee->dev;
 
 	DoTxHighPower(dev);
@@ -125,7 +125,7 @@
 /*
  *	Implementation of DIG for Zebra and Zebra2.
  */
-void DIG_Zebra(struct net_device *dev)
+static void DIG_Zebra(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	u16			CCKFalseAlarm, OFDMFalseAlarm;
@@ -149,11 +149,11 @@
 
 #if 1 /* lzm reserved 080826 */
 	AwakePeriodIn2Sec = (2000 - priv->DozePeriodInPast2Sec);
-	priv ->DozePeriodInPast2Sec = 0;
+	priv->DozePeriodInPast2Sec = 0;
 
 	if (AwakePeriodIn2Sec) {
-		OfdmFA1 = (u16)((OfdmFA1 * AwakePeriodIn2Sec) / 2000) ;
-		OfdmFA2 = (u16)((OfdmFA2 * AwakePeriodIn2Sec) / 2000) ;
+		OfdmFA1 = (u16)((OfdmFA1 * AwakePeriodIn2Sec) / 2000);
+		OfdmFA2 = (u16)((OfdmFA2 * AwakePeriodIn2Sec) / 2000);
 	} else {
 		;
 	}
@@ -202,7 +202,7 @@
 /*
  *	Dispatch DIG implementation according to RF.
  */
-void DynamicInitGain(struct net_device *dev)
+static void DynamicInitGain(struct net_device *dev)
 {
 	DIG_Zebra(dev);
 }
@@ -210,7 +210,7 @@
 void rtl8180_hw_dig_wq(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_dig_wq);
+	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, hw_dig_wq);
 	struct net_device *dev = ieee->dev;
 	struct r8180_priv *priv = ieee80211_priv(dev);
 
@@ -223,7 +223,7 @@
 
 }
 
-int IncludedInSupportedRates(struct r8180_priv *priv, u8 TxRate)
+static int IncludedInSupportedRates(struct r8180_priv *priv, u8 TxRate)
 {
 	u8 rate_len;
 	u8 rate_ex_len;
@@ -234,7 +234,7 @@
 
 	rate_len = priv->ieee80211->current_network.rates_len;
 	rate_ex_len = priv->ieee80211->current_network.rates_ex_len;
-	for (idx=0; idx < rate_len; idx++) {
+	for (idx = 0; idx < rate_len; idx++) {
 		if ((priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate) {
 			Found = 1;
 			goto found_rate;
@@ -247,7 +247,7 @@
 		}
 	}
 	return Found;
-	found_rate:
+found_rate:
 	return Found;
 }
 
@@ -255,7 +255,7 @@
  *	Get the Tx rate one degree up form the input rate in the supported rates.
  *	Return the upgrade rate if it is successed, otherwise return the input rate.
  */
-u8 GetUpgradeTxRate(struct net_device *dev, u8 rate)
+static u8 GetUpgradeTxRate(struct net_device *dev, u8 rate)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	u8                      UpRate;
@@ -315,7 +315,7 @@
  *	Return the degrade rate if it is successed, otherwise return the input rate.
  */
 
-u8 GetDegradeTxRate(struct net_device *dev, u8 rate)
+static u8 GetDegradeTxRate(struct net_device *dev, u8 rate)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	u8                      DownRate;
@@ -375,7 +375,7 @@
  *      CCK rate.
  */
 
-bool MgntIsCckRate(u16 rate)
+static bool MgntIsCckRate(u16 rate)
 {
 	bool bReturn = false;
 
@@ -397,7 +397,7 @@
 
 	tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL);
 	CurrentThermal = (tmpu1Byte & 0xf0) >> 4; /*[ 7:4]: thermal meter indication. */
-	CurrentThermal = (CurrentThermal > 0x0c) ? 0x0c:CurrentThermal;/* lzm add 080826 */
+	CurrentThermal = (CurrentThermal > 0x0c) ? 0x0c : CurrentThermal;/* lzm add 080826 */
 
 	if (CurrentThermal != priv->ThermalMeter) {
 		/* Update Tx Power level on each channel. */
@@ -435,7 +435,7 @@
 	}
 	priv->ThermalMeter = CurrentThermal;
 }
-void StaRateAdaptive87SE(struct net_device *dev)
+static void StaRateAdaptive87SE(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	unsigned long	CurrTxokCnt;
@@ -513,7 +513,7 @@
 	 */
 
 	/*
- 	 *  11Mbps or 36Mbps
+	 * 11Mbps or 36Mbps
 	 * Check more times in these rate(key rates).
 	 */
 	if (priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72)
@@ -542,7 +542,7 @@
 		}
 	} else if (CurrSignalStrength > -47 && (CurrRetryRate < 50)) {
 		/*
- 		 * 2For High Power
+		 * 2For High Power
 		 *
 		 * Return to highest data rate, if signal strength is good enough.
 		 * SignalStrength threshold(-50dbm) is for RTL8186.
@@ -577,8 +577,7 @@
 
 		if (bTryDown && (CurrSignalStrength < -75)) /* cable link */
 			priv->TryDownCountLowData += TryDownTh;
-	}
-	else if (priv->CurrentOperaRate == 96) {
+	} else if (priv->CurrentOperaRate == 96) {
 		/* 2For 48Mbps */
 		/* Air Link */
 		if (((CurrRetryRate > 48) && (priv->LastRetryRate > 47))) {
@@ -593,7 +592,7 @@
 			bTryUp = true;
 		}
 
-		if (bTryDown && (CurrSignalStrength < -75)){
+		if (bTryDown && (CurrSignalStrength < -75)) {
 			priv->TryDownCountLowData += TryDownTh;
 		}
 	} else if (priv->CurrentOperaRate == 72) {
@@ -618,7 +617,7 @@
 			bTryDown = true;
 		} else if (((CurrRetryRate > 33) && (priv->LastRetryRate > 32)) && (CurrSignalStrength > -82)) { /* Cable Link */
 			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2 )) {
+		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
 			bTryDown = true;
 			priv->TryDownCountLowData += TryDownTh;
 		} else if ((CurrRetryRate < 20) && (priv->LastRetryRate < 21)) { /* TO DO: need to consider (RSSI) */
@@ -641,8 +640,7 @@
 		/* 2For 11Mbps */
 		if (CurrRetryRate > 95) {
 			bTryDown = true;
-		}
-		else if ((CurrRetryRate < 29) && (priv->LastRetryRate < 30)) { /*TO DO: need to consider (RSSI) */
+		} else if ((CurrRetryRate < 29) && (priv->LastRetryRate < 30)) { /*TO DO: need to consider (RSSI) */
 			bTryUp = true;
 		}
 	} else if (priv->CurrentOperaRate == 11) {
@@ -667,12 +665,12 @@
 	}
 
 	if (bTryUp && bTryDown)
-	printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n");
+		printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n");
 
 	/* 1 Test Upgrading Tx Rate
 	 * Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC.
 	 * To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate.
-	 */ 
+	 */
 	if (!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0)
 		&& priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2) {
 		if (jiffies % (CurrRetryRate + 101) == 0) {
@@ -702,7 +700,7 @@
 			if (priv->CurrentOperaRate == 22)
 				bUpdateInitialGain = true;
 
-			/* 
+			/*
 			 * The difference in throughput between 48Mbps and 36Mbps is 8M.
 			 * So, we must be careful in this rate scale. Isaiah 2008-02-15.
 			 */
@@ -718,7 +716,7 @@
 			if (priv->CurrentOperaRate == 36) {
 				priv->bUpdateARFR = true;
 				write_nic_word(dev, ARFR, 0x0F8F); /* bypass 12/9/6 */
-			} else if(priv->bUpdateARFR) {
+			} else if (priv->bUpdateARFR) {
 				priv->bUpdateARFR = false;
 				write_nic_word(dev, ARFR, 0x0FFF); /* set 1M ~ 54Mbps. */
 			}
@@ -732,7 +730,7 @@
 		}
 	} else {
 		if (priv->TryupingCount > 0)
-			priv->TryupingCount --;
+			priv->TryupingCount--;
 	}
 
 	if (bTryDown) {
@@ -757,7 +755,7 @@
 			priv->CurrentOperaRate = GetDegradeTxRate(dev, priv->CurrentOperaRate);
 
 			/* Reduce chariot training time at weak signal strength situation. SD3 ED demand. */
-			if ((CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72 )) {
+			if ((CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72)) {
 				priv->CurrentOperaRate = 72;
 			}
 
@@ -781,8 +779,8 @@
 			priv->TryDownCountLowData--;
 	}
 
-	/* 
- 	 * Keep the Tx fail rate count to equal to 0x15 at most. 
+	/*
+	 * Keep the Tx fail rate count to equal to 0x15 at most.
 	 * Reduce the fail count at least to 10 sec if tx rate is tending stable.
 	 */
 	if (priv->FailTxRateCount >= 0x15 ||
@@ -803,14 +801,14 @@
 		if (u1bCck == CckTxPwrIdx) {
 			if (u1bOfdm != (OfdmTxPwrIdx + 2)) {
 			priv->bEnhanceTxPwr = true;
-			u1bOfdm = ((u1bOfdm + 2) > 35) ? 35: (u1bOfdm + 2);
+			u1bOfdm = ((u1bOfdm + 2) > 35) ? 35 : (u1bOfdm + 2);
 			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
 			}
 		} else if (u1bCck < CckTxPwrIdx) {
 		/* case 2: enter high power */
 			if (!priv->bEnhanceTxPwr) {
 				priv->bEnhanceTxPwr = true;
-				u1bOfdm = ((u1bOfdm + 2) > 35) ? 35: (u1bOfdm + 2);
+				u1bOfdm = ((u1bOfdm + 2) > 35) ? 35 : (u1bOfdm + 2);
 				write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
 			}
 		}
@@ -826,7 +824,7 @@
 		/* case 2: enter high power */
 		else if (u1bCck < CckTxPwrIdx) {
 			priv->bEnhanceTxPwr = false;
-			u1bOfdm = ((u1bOfdm - 2) > 0) ? (u1bOfdm - 2): 0;
+			u1bOfdm = ((u1bOfdm - 2) > 0) ? (u1bOfdm - 2) : 0;
 			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
 		}
 	}
@@ -851,7 +849,7 @@
 				else
 					priv->InitialGain--;
 
-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);
+				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n", priv->InitialGain, priv->CurrentOperaRate);
 				UpdateInitialGain(dev);
 			}
 		} else { /* OFDM */
@@ -859,7 +857,7 @@
 				priv->InitialGainBackUp = priv->InitialGain;
 
 				priv->InitialGain++;
-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);
+				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n", priv->InitialGain, priv->CurrentOperaRate);
 				UpdateInitialGain(dev);
 			}
 		}
@@ -904,7 +902,7 @@
 	} else { /* Initialization case. */
 		priv->AdRxSignalStrength = SignalStrength;
 	}
-	
+
 	if (priv->LastRxPktAntenna) /* Main antenna. */
 		priv->AdMainAntennaRxOkCnt++;
 	else	 /* Aux antenna. */
@@ -943,7 +941,7 @@
 		break;
 	}
 
-	if(bAntennaSwitched)
+	if (bAntennaSwitched)
 		priv->CurrAntennaIndex = u1bAntennaIndex;
 
 	return bAntennaSwitched;
@@ -1000,8 +998,8 @@
 		priv->AdRxSsThreshold = (priv->AdRxSignalStrength + priv->AdRxSsBeforeSwitched) / 2;
 
 		priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
-					priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;
-		if(priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched) {
+					priv->AdMaxRxSsThreshold : priv->AdRxSsThreshold;
+		if (priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched) {
 		/* Rx signal strength is not improved after we swtiched antenna. => Swich back. */
 			/* Increase Antenna Diversity checking period due to bad decision. */
 			priv->AdCheckPeriod *= 2;
@@ -1083,7 +1081,7 @@
 
 					priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2;
 					priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
-								priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;/* +by amy 080312 */
+								priv->AdMaxRxSsThreshold : priv->AdRxSsThreshold;/* +by amy 080312 */
 				}
 
 				/* Reduce Antenna Diversity checking period if possible. */
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index 9ae96b7..7c9a8bf 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -136,7 +136,7 @@
 
 };
 
-void rtl8225z2_set_gain(struct net_device *dev, short gain)
+static void rtl8225z2_set_gain(struct net_device *dev, short gain)
 {
 	const u8 *rtl8225_gain;
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -279,8 +279,8 @@
  * Map dBm into Tx power index according to current HW model, for example,
  * RF and PA, and current wireless mode.
  */
-s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
-		 s32 PowerInDbm)
+static s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
+			s32 PowerInDbm)
 {
 	bool bUseDefault = true;
 	s8 TxPwrIdx = 0;
diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
index dab7875..4e01653 100644
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ b/drivers/staging/rtl8187se/r8180_wx.c
@@ -50,8 +50,9 @@
 }
 
 
-int r8180_wx_set_key(struct net_device *dev, struct iw_request_info *info,
-		     union iwreq_data *wrqu, char *key)
+static int r8180_wx_set_key(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *key)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	struct iw_point *erq = &(wrqu->encoding);
@@ -1146,12 +1147,12 @@
 	if (priv->ieee80211->bHwRadioOff)
 		return 0;
 
-		down(&priv->wx_sem);
+	down(&priv->wx_sem);
 #if 1
-		ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, wrqu->data.length);
+	ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, wrqu->data.length);
 #endif
-		up(&priv->wx_sem);
-		return ret;
+	up(&priv->wx_sem);
+	return ret;
 
 
 }
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 978dc5f..dc52a3e 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -30,10 +30,13 @@
 #define TC_3W_POLL_MAX_TRY_CNT 5
 
 static u8 MAC_REG_TABLE[][2] =	{
-	/*PAGA 0:	*/
-	/* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */
-	/* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */
-	/* 0x1F0~0x1F8  set in MacConfig_85BASIC() */
+	/*
+	 * PAGE 0:
+	 * 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in
+	 * HwConfigureRTL8185()
+	 * 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185().
+	 * 0x1F0~0x1F8  set in MacConfig_85BASIC()
+	 */
 	{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
 	{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
 	{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
@@ -44,15 +47,20 @@
 	{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
 	{0xff, 0x00},
 
-	/*PAGE 1: */
-	/* For Flextronics system Logo PCIHCT failure: */
-	/* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */
+	/*
+	 * PAGE 1:
+	 * For Flextronics system Logo PCIHCT failure:
+	 * 0x1C4~0x1CD set no-zero value to avoid PCI configuration
+	 * space 0x45[7]=1
+	 */
 	{0x5e, 0x01},
 	{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
 	{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
 	{0x82, 0xFF}, {0x83, 0x03},
-	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
-	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */
+	/* lzm add 080826 */
+	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22},
+	/* lzm add 080826 */
+	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},
 	{0xe2, 0x00},
 
 
@@ -66,21 +74,24 @@
 	{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
 	{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
 
-	/* PAGA 0: */
+	/* PAGE 0: */
 	{0x5e, 0x00}, {0x9f, 0x03}
 	};
 
 
 static u8  ZEBRA_AGC[] = {
 	0,
-	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
-	0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
-	0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
-	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
-	0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
-	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
-	0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76,
+	0x75, 0x74, 0x73, 0x72, 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
+	0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0x48, 0x47, 0x46, 0x45,
+	0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 0x17, 0x17, 0x18, 0x18,
+	0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22,
+	0x22, 0x23, 0x23, 0x24, 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
+	0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
 	};
 
 static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
@@ -123,19 +134,27 @@
 static void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
 {
 	write_nic_byte(dev, offset, data);
-	read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
+	/*
+	 * To make sure write operation is completed,
+	 * 2005.11.09, by rcnjko.
+	 */
+	read_nic_byte(dev, offset);
 }
 
 static void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
 {
 	write_nic_word(dev, offset, data);
-	read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
+	/*
+	 * To make sure write operation is completed,
+	 *  2005.11.09, by rcnjko.
+	 */
+	read_nic_word(dev, offset);
 }
 
 static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 {
 	if (offset == PhyAddr) {
-	/* For Base Band configuration. */
+		/* For Base Band configuration. */
 		unsigned char	cmdByte;
 		unsigned long	dataBytes;
 		unsigned char	idx;
@@ -146,16 +165,17 @@
 
 		/*
 		 *	071010, rcnjko:
-		 *	The critical section is only BB read/write race condition.
-		 *	Assumption:
-		 *	1. We assume NO one will access BB at DIRQL, otherwise, system will crash for
+		 *	The critical section is only BB read/write race
+		 *	condition. Assumption:
+		 *	1. We assume NO one will access BB at DIRQL, otherwise,
+		 *	system will crash for
 		 *	acquiring the spinlock in such context.
 		 *	2. PlatformIOWrite4Byte() MUST NOT be recursive.
 		 */
 		/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
 
 		for (idx = 0; idx < 30; idx++) {
-		/* Make sure command bit is clear before access it. */
+			/* Make sure command bit is clear before access it. */
 			u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
 			if ((u1bTmp & BIT7) == 0)
 				break;
@@ -164,14 +184,19 @@
 		}
 
 		for (idx = 0; idx < 3; idx++)
-			PlatformIOWrite1Byte(dev, offset+1+idx, ((u8 *)&dataBytes)[idx]);
+			PlatformIOWrite1Byte(dev, offset+1+idx,
+					     ((u8 *)&dataBytes)[idx]);
 
 		write_nic_byte(dev, offset, cmdByte);
 
 		/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
 	} else {
 		write_nic_dword(dev, offset, data);
-		read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
+		/*
+		 * To make sure write operation is completed, 2005.11.09,
+		 *  by rcnjko.
+		 */
+		read_nic_dword(dev, offset);
 	}
 }
 
@@ -284,9 +309,13 @@
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool   bAntennaSwitched = true;
-	u8	ant_diversity_offset = 0x00; /* 0x00 = disabled, 0x80 = enabled */
+	/* 0x00 = disabled, 0x80 = enabled */
+	u8	ant_diversity_offset = 0x00;
 
-	/* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */
+	/*
+	 * printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n",
+	 * DefaultAnt, bAntDiversity);
+	 */
 
 	/* Threshold for antenna diversity. */
 	write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
@@ -300,22 +329,27 @@
 
 		/* Config CCK RX antenna. */
 		write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 | ant_diversity_offset */
+
+		/* Reg01 : 47 | ant_diversity_offset */
+		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
 
 		/* Config OFDM RX antenna. */
 		write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);	/* Reg18 : 32 */
+		/* Reg18 : 32 */
+		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
 	} else { /* main Antenna */
 		/* Mac register, main antenna */
 		write_nic_byte(dev, ANTSEL, 0x03);
 
 		/* Config CCK RX antenna.	*/
 		write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 */
+		/* Reg01 : 47 */
+		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
 
 		/* Config OFDM RX antenna. */
 		write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset); /*Reg18 : 32 */
+		/*Reg18 : 32 */
+		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
 	}
 	priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
 	return	bAntennaSwitched;
@@ -382,18 +416,23 @@
 	RF_WriteReg(dev, 0x05, 0x059b);		mdelay(1);
 	RF_WriteReg(dev, 0x06, 0x0081);		mdelay(1);
 	RF_WriteReg(dev, 0x07, 0x01A0);		mdelay(1);
-/* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */
+/*
+ * Don't write RF23/RF24 to make a difference between 87S C cut and D cut.
+ * asked by SD3 stevenl.
+ */
 	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
 	RF_WriteReg(dev, 0x0b, 0x0418);		mdelay(1);
 
 	if (d_cut) {
 		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
 		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1); /* RX LO buffer */
+		/* RX LO buffer */
+		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1);
 	} else {
 		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
 		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1); /* RX LO buffer */
+		/* RX LO buffer */
+		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1);
 	}
 
 	RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
@@ -408,19 +447,24 @@
 
 	RF_WriteReg(dev, 0x05, 0x0203);		mdelay(1); /* 203, 343 */
 	RF_WriteReg(dev, 0x06, 0x0200);		mdelay(1); /* 400 */
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */
+	/* switch to reg16-reg30, and HSSI disable 137 */
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1); /* Z4 synthesizer loop filter setting, 392 */
+	/* Z4 synthesizer loop filter setting, 392 */
+	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1); /* switch to reg0-reg15, and HSSI disable */
+	/* switch to reg0-reg15, and HSSI disable */
+	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1);
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1); /* CBC on, Tx Rx disable, High gain */
+	/* CBC on, Tx Rx disable, High gain */
+	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1);
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1); /* Z4 setted channel 1 */
+	/* Z4 setted channel 1 */
+	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1);
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
 	RF_WriteReg(dev, 0x02, 0x088D);		mdelay(1); /* LC calibration */
@@ -428,7 +472,8 @@
 	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
 	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */
+	/* switch to reg16-reg30 137, and HSSI disable 137 */
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
 	RF_WriteReg(dev, 0x07, 0x0000);		mdelay(1);
@@ -442,46 +487,58 @@
 	/* For crystal calibration, added by Roger, 2007.12.11. */
 	if (priv->bXtalCalibration) { /* reg 30.	*/
 	 /*
- 	  *  enable crystal calibration.
-	  *		RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
-	  *		(2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
-	  *		(3)RF signal on/off when calibration[13], default: on, set BIT13=0.
-	  *		So we should minus 4 BITs offset. 
+	  *	enable crystal calibration.
+	  *	RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
+	  *	(2)PA Pwr delay timer[15:14], default: 2.4us,
+	  *	set BIT15=0
+	  *	(3)RF signal on/off when calibration[13], default: on,
+	  *	set BIT13=0.
+	  *	So we should minus 4 BITs offset.
 	  */
-		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
+		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) |
+			    (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
 		printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
-		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
+		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) |
+		       BIT11 | BIT9);
 	} else {
 		/* using default value. Xin=6, Xout=6.	*/
 		RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
 	}
-
-	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1); /* switch to reg0-reg15, and HSSI enable */
-	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1); /* Rx BB start calibration, 00c//+edward */
-	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1); /* temperature meter off */
+	/* switch to reg0-reg15, and HSSI enable */
+	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1);
+	/* Rx BB start calibration, 00c//+edward */
+	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
+	/* temperature meter off */
+	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);
 	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1); /* Rx mode */
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1); /* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1); /* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1); /* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
+	/* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1);
+	/* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1);
+	/* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);
+	/* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1);
+	/* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1);
 	/* power save parameters. */
 	u1b24E = read_nic_byte(dev, 0x24E);
 	write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
 
-	/*=============================================================================
+	/*======================================================================
 	 *
-	 *===========================================================================
+	 *======================================================================
 	 * CCKCONF.TXT
-	 *===========================================================================
+	 *======================================================================
 	 *
 	 *	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
 	 *	CCK reg0x00[7]=1'b1 :power saving for TX (default)
 	 *	CCK reg0x00[6]=1'b1: power saving for RX (default)
-	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation.
+	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related
+	 *	circuits if not doing channel estimation.
 	 *	CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
 	 *	CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
 	 */
@@ -501,9 +558,9 @@
 
 
 	/*
-	 *===========================================================================
+	 *======================================================================
 	 *	AGC.txt
-	 *===========================================================================
+	 *======================================================================
 	 */
 
 	write_phy_ofdm(dev, 0x00, 0x12);
@@ -526,11 +583,11 @@
 	PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080);	/* Annie, 2006-05-05 */
 
 	/*
-	 *===========================================================================
+	 *======================================================================
 	 *
-	 *===========================================================================
+	 *======================================================================
 	 * OFDMCONF.TXT
-	 *===========================================================================
+	 *======================================================================
 	 */
 
 	for (i = 0; i < 60; i++) {
@@ -544,12 +601,16 @@
 	}
 
 	/*
-	 *===========================================================================
+	 *======================================================================
 	 * by amy for antenna
-	 *===========================================================================
+	 *======================================================================
 	 */
-	/* Config Sw/Hw  Combinational Antenna Diversity. Added by Roger, 2008.02.26.	*/
-	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
+	/*
+	 * Config Sw/Hw  Combinational Antenna Diversity. Added by Roger,
+	 * 2008.02.26.
+	 */
+	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1,
+			     priv->bSwAntennaDiverity);
 }
 
 
@@ -560,7 +621,8 @@
 	/* lzm add 080826 */
 	if (priv->eRFPowerState != eRfOn) {
 		/*	Don't access BB/RF under disable PLL situation.
-		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n"));
+		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain -
+		 *	pHalData->eRFPowerState!=eRfOn\n"));
 		 *	Back to the original state
 		 */
 		priv->InitialGain = priv->InitialGainBackUp;
@@ -635,7 +697,7 @@
 	u4bRfReg = RF_ReadReg(dev, 0x02);
 
 	/* Enable Thermal meter indication.	*/
-	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);			mdelay(1);
+	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);		mdelay(1);
 }
 
 static void PhyConfig8185(struct net_device *dev)
@@ -645,16 +707,18 @@
 	   priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
 	/*  RF config */
 	ZEBRA_Config_85BASIC_HardCode(dev);
-	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */
+	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce,
+	 * 2007-06-06.
+	 */
 	if (priv->bDigMechanism) {
 		if (priv->InitialGain == 0)
 			priv->InitialGain = 4;
 	}
 
 	/*
-	 *	Enable thermal meter indication to implement TxPower tracking on 87SE.
-	 *	We initialize thermal meter here to avoid unsuccessful configuration.
-	 *	Added by Roger, 2007.12.11.
+	 *	Enable thermal meter indication to implement TxPower tracking
+	 *	on 87SE. We initialize thermal meter here to avoid unsuccessful
+	 *	configuration. Added by Roger, 2007.12.11.
 	 */
 	if (priv->bTxPowerTrack)
 		InitTxPwrTracking87SE(dev);
@@ -667,7 +731,10 @@
 
 static void HwConfigureRTL8185(struct net_device *dev)
 {
-	/* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */
+	/*
+	 * RTL8185_TODO: Determine Retrylimit, TxAGC,
+	 * AutoRateFallback control.
+	 */
 	u8 bUNIVERSAL_CONTROL_RL = 0;
 	u8 bUNIVERSAL_CONTROL_AGC = 1;
 	u8 bUNIVERSAL_CONTROL_ANT = 1;
@@ -691,7 +758,7 @@
 		write_nic_byte(dev, OFDM_TXAGC, 128);
 		val8 = val8 & 0xfe;
 	} else {
-		val8 = val8 | 0x01 ;
+		val8 = val8 | 0x01;
 	}
 
 
@@ -715,7 +782,9 @@
 	if (bAUTO_RATE_FALLBACK_CTL) {
 		val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
 
-		/* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */
+		/* <RJ_TODO_8185B> We shall set up the ARFR according
+		 * to user's setting.
+		 */
 		PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */
 	}
 	write_nic_byte(dev, RATE_FALLBACK, val8);
@@ -724,9 +793,9 @@
 static void MacConfig_85BASIC_HardCode(struct net_device *dev)
 {
 	/*
-	 *==========================================================================
+	 *======================================================================
 	 * MACREG.TXT
-	 *==========================================================================
+	 *======================================================================
 	 */
 	int nLinesRead = 0;
 	u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
@@ -745,7 +814,7 @@
 
 		write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
 	}
-	/* ============================================================================ */
+	/* ================================================================= */
 }
 
 static void MacConfig_85BASIC(struct net_device *dev)
@@ -754,12 +823,14 @@
 	u8			u1DA;
 	MacConfig_85BASIC_HardCode(dev);
 
-	/* ============================================================================ */
+	/* ================================================================= */
 
 	/* Follow TID_AC_MAP of WMac. */
 	write_nic_word(dev, TID_AC_MAP, 0xfa50);
 
-	/* Interrupt Migration, Jong suggested we use set 0x0000 first, 2005.12.14, by rcnjko. */
+	/* Interrupt Migration, Jong suggested we use set 0x0000 first,
+	 * 2005.12.14, by rcnjko.
+	 */
 	write_nic_word(dev, IntMig, 0x0000);
 
 	/* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */
@@ -768,7 +839,11 @@
 	PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
 
 	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
-	/* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */
+
+	/*
+	 *  power save parameter based on
+	 * "87SE power save parameters 20071127.doc", as follow.
+	 */
 
 	/* Enable DA10 TX power saving */
 	u1DA = read_nic_byte(dev, PHYPR);
@@ -803,31 +878,45 @@
 
 	/*
 	 *	<RJ_TODO_8185B>
-	 *	TODO: We still don't know how to set up these registers, just follow WMAC to
-	 *	verify 8185B FPAG.
+	 *	TODO: We still don't know how to set up these registers,
+	 *	just follow WMAC to verify 8185B FPAG.
 	 *
 	 *	<RJ_TODO_8185B>
 	 *	Jong said CWmin/CWmax register are not functional in 8185B,
-	 *	so we shall fill channel access realted register into AC parameter registers,
+	 *	so we shall fill channel access realted register into AC
+	 *	parameter registers,
 	 *	even in nQBss.
 	 */
-	ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */
+
+	/* Suggested by Jong, 2005.12.08. */
+	ChnlAccessSetting->SIFS_Timer = 0x22;
 	ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
 	ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
-	ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
+	/*
+	 * Suggested by wcchu, it is the default value of EIFS register,
+	 * 2005.12.08.
+	 */
+	ChnlAccessSetting->EIFS_Timer = 0x5B;
 	ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
 	ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */
 
 	write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
-	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
+	/*
+	 * Rewrited from directly use PlatformEFIOWrite1Byte(),
+	 * by Annie, 2006-03-29.
+	 */
+	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer);
 
 	write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer);
 
-	write_nic_byte(dev, AckTimeOutReg, 0x5B); /* <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
+	/*
+	 * <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS
+	 * register, 2005.12.08.
+	 */
+	write_nic_byte(dev, AckTimeOutReg, 0x5B);
 
-	for (eACI = 0; eACI < AC_MAX; eACI++) {
+	for (eACI = 0; eACI < AC_MAX; eACI++)
 		write_nic_byte(dev, ACM_CONTROL, 0);
-	}
 }
 
 static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
@@ -837,7 +926,10 @@
 	u8	btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 
 	if ((btWirelessMode & btSupportedWirelessMode) == 0)	{
-		/* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */
+		/*
+		 * Don't switch to unsupported wireless mode, 2006.02.15,
+		 * by rcnjko.
+		 */
 		DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
 			btWirelessMode, btSupportedWirelessMode);
 		return;
@@ -859,11 +951,11 @@
 		}
 	}
 
-	/* 
- 	 * 2. Swtich band: RF or BB specific actions,
-	 * for example, refresh tables in omc8255, or change initial gain if necessary.
-	 * Nothing to do for Zebra to switch band.
-	 * Update current wireless mode if we switch to specified band successfully. 
+	/*
+	 * 2. Swtich band: RF or BB specific actions,
+	 * for example, refresh tables in omc8255, or change initial gain if
+	 * necessary. Nothing to do for Zebra to switch band. Update current
+	 * wireless mode if we switch to specified band successfully.
 	 */
 
 	ieee->mode = (WIRELESS_MODE)btWirelessMode;
@@ -876,7 +968,8 @@
 	else if (ieee->mode == WIRELESS_MODE_G)
 		DMESG("WIRELESS_MODE_G\n");
 
-	ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
+	ActUpdateChannelAccessSetting(dev, ieee->mode,
+				      &priv->ChannelAccessSetting);
 }
 
 void rtl8185b_irq_enable(struct net_device *dev)
@@ -892,7 +985,7 @@
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	u8 i;
 
-	for (i = 0; i < 6 ; i++)
+	for (i = 0; i < 6; i++)
 		priv->ieee80211->current_network.bssid[i] = 0x55;
 
 
@@ -901,11 +994,12 @@
 	/*
 	 *	Stop Beacon.
 	 *
-	 *	Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
-	 *	Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
-	 *	Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
+	 *	Vista add a Adhoc profile, HW radio off until
+	 *	OID_DOT11_RESET_REQUEST Driver would set MSR=NO_LINK,
+	 *	then HW Radio ON, MgntQueue Stuck. Because Bcn DMA isn't
+	 *	complete, mgnt queue would stuck until Bcn packet send.
 	 *
-	 *	Disable Beacon Queue Own bit, suggested by jong	
+	 *	Disable Beacon Queue Own bit, suggested by jong
 	 */
 	ieee80211_stop_send_beacons(priv->ieee80211);
 
@@ -938,12 +1032,14 @@
 	 * Commented out by rcnjko, 2005.01.27:
 	 * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
 	 *
-	 *	2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success
+	 *	2004/09/15, kcwu, the key should be cleared, or the new
+	 *	handshaking will not success
 	 *
-	 *	In WPA WPA2 need to Clear all key ... because new key will set after new handshaking.
-	 *	2004.10.11, by rcnjko. 
+	 *	In WPA WPA2 need to Clear all key ... because new key will set
+	 *	after new handshaking. 2004.10.11, by rcnjko.
 	 */
-	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn);
+	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid,
+				asRsn);
 
 	priv->ieee80211->state = IEEE80211_NOLINK;
 }
@@ -964,11 +1060,13 @@
 
 		if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
 			/*
- 			 * 	We clear key here instead of MgntDisconnectAP() because that
-			 *	MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
-			 *	e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
-			 *	used to handle disassociation related things to AP, e.g. send Disassoc
-			 *	frame to AP.  2005.01.27, by rcnjko. 
+			 *	We clear key here instead of MgntDisconnectAP()
+			 *	because that MgntActSet_802_11_DISASSOCIATE()
+			 *	is an interface called by OS, e.g.
+			 *	OID_802_11_DISASSOCIATE in Windows while as
+			 *	MgntDisconnectAP() is used to handle
+			 *	disassociation related things to AP, e.g. send
+			 *	Disassoc frame to AP.  2005.01.27, by rcnjko.
 			 */
 			MgntDisconnectAP(dev, asRsn);
 		}
@@ -979,12 +1077,14 @@
 /*
  *	Description:
  *		Chang RF Power State.
- *		Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
+ *		Note that, only MgntActSet_RF_State() is allowed to set
+ *		HW_VAR_RF_STATE.
  *
  *	Assumption:
  *		PASSIVE LEVEL.
  */
-static bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
+static bool SetRFPowerState(struct net_device *dev,
+		RT_RF_POWER_STATE eRFPowerState)
 {
 	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool	bResult = false;
@@ -997,7 +1097,8 @@
 	return bResult;
 }
 
-bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
+bool MgntActSet_RF_State(struct net_device *dev,
+		RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
 {
 	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool	bActionAllowed = false;
@@ -1006,8 +1107,9 @@
 	u16	RFWaitCounter = 0;
 	unsigned long flag;
 	/*
-	 *	Prevent the race condition of RF state change. By Bruce, 2007-11-28.
-	 *	Only one thread can change the RF state at one time, and others should wait to be executed.
+	 *	Prevent the race condition of RF state change. By Bruce,
+	 *	2007-11-28. Only one thread can change the RF state at one time,
+	 *	and others should wait to be executed.
 	 */
 	while (true) {
 		spin_lock_irqsave(&priv->rf_ps_lock, flag);
@@ -1018,7 +1120,10 @@
 				RFWaitCounter++;
 				udelay(1000); /* 1 ms	*/
 
-				/* Wait too long, return FALSE to avoid to be stuck here. */
+				/*
+				 *	Wait too long, return FALSE to avoid
+				 *	to be stuck here.
+				 */
 				if (RFWaitCounter > 1000) { /* 1sec */
 					printk("MgntActSet_RF_State(): Wait too long to set RF\n");
 					/* TODO: Reset RF state? */
@@ -1036,8 +1141,10 @@
 	switch (StateToSet) {
 	case eRfOn:
 		/*
-		 *	Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or
-		 *	the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02.
+		 *	Turn On RF no matter the IPS setting because we need to
+		 *	update the RF state to Ndis under Vista, or the Windows
+		 *	does not allow the driver to perform site survey any
+		 *	more. By Bruce, 2007-10-02.
 		 */
 		priv->RfOffReason &= (~ChangeSource);
 
@@ -1045,7 +1152,8 @@
 			priv->RfOffReason = 0;
 			bActionAllowed = true;
 
-			if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW)
+			if (rtState == eRfOff &&
+			    ChangeSource >= RF_CHANGE_BY_HW)
 				bConnectBySSID = true;
 		}
 		break;
@@ -1056,13 +1164,18 @@
 		if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
 			/*
 			 *	060808, Annie:
-			 *	Disconnect to current BSS when radio off. Asked by QuanTa.
+			 *	Disconnect to current BSS when radio off.
+			 *	Asked by QuanTa.
 			 *
-			 *	Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
-			 *	because we do NOT need to set ssid to dummy ones.
+			 *	Calling MgntDisconnect() instead of
+			 *	MgntActSet_802_11_DISASSOCIATE(), because
+			 *	we do NOT need to set ssid to dummy ones.
 			 */
 			MgntDisconnect(dev, disas_lv_ss);
-			/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */
+			/*
+			 *	Clear content of bssDesc[] and bssDesc4Query[]
+			 *	to avoid reporting old bss to UI.
+			 */
 		}
 
 		priv->RfOffReason |= ChangeSource;
@@ -1092,18 +1205,21 @@
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
-	 *	This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
-	 *	is really scheduled.
-	 *	The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
-	 *	previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
-	 *	blocks the IPS procedure of switching RF.
+	 *	This flag "bSwRfProcessing", indicates the status of IPS
+	 *	procedure, should be set if the IPS workitem is really
+	 *	scheduled. The old code, sets this flag before scheduling the
+	 *	IPS workitem and however, at the same time the previous IPS
+	 *	workitem did not end yet, fails to schedule the current
+	 *	workitem. Thus, bSwRfProcessing blocks the IPS procedure of
+	 *	switching RF.
 	 */
 	priv->bSwRfProcessing = true;
 
 	MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
 
 	/*
-	 *	To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
+	 *	To solve CAM values miss in RF OFF, rewrite CAM values after
+	 *	RF ON. By Bruce, 2007-09-20.
 	 */
 
 	priv->bSwRfProcessing = false;
@@ -1122,10 +1238,10 @@
 
 		/*
 		 *	Do not enter IPS in the following conditions:
-		 *	(1) RF is already OFF or Sleep
-		 *	(2) bSwRfProcessing (indicates the IPS is still under going)
-		 *	(3) Connected (only disconnected can trigger IPS)
-		 *	(4) IBSS (send Beacon)
+		 *	(1) RF is already OFF or
+		 *	Sleep (2) bSwRfProcessing (indicates the IPS is still
+		 *	under going) (3) Connected (only disconnected can
+		 *	trigger IPS)(4) IBSS (send Beacon)
 		 *	(5) AP mode (send Beacon)
 		 */
 		if (rtState == eRfOn && !priv->bSwRfProcessing
@@ -1141,7 +1257,9 @@
 	RT_RF_POWER_STATE rtState;
 	if (priv->bInactivePs) {
 		rtState = priv->eRFPowerState;
-		if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
+		if ((rtState == eRfOff || rtState == eRfSleep) &&
+		    !priv->bSwRfProcessing
+		    && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
 			priv->eInactivePowerState = eRfOn;
 			InactivePowerSave(dev);
 		}
@@ -1170,27 +1288,32 @@
 	HwConfigureRTL8185(dev);
 	write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
 	write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
-	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */
+	/* default network type to 'No Link' */
+	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3);
 	write_nic_word(dev, BcnItv, 100);
 	write_nic_word(dev, AtimWnd, 2);
 	PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
 	write_nic_byte(dev, WPA_CONFIG, 0);
 	MacConfig_85BASIC(dev);
-	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */
+	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07,
+	 * by rcnjko.
+	 */
 	/* BT_DEMO_BOARD type */
 	PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
 
 	/*
-	 *---------------------------------------------------------------------------
+	 *---------------------------------------------------------------------
 	 *	Set up PHY related.
-	 *---------------------------------------------------------------------------
+	 *---------------------------------------------------------------------
 	 */
 	/* Enable Config3.PARAM_En to revise AnaaParm. */
 	write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
 	tmpu8 = read_nic_byte(dev, CONFIG3);
 	write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
 	/* Turn on Analog power. */
-	/* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */
+	/* Asked for by William, otherwise, MAC 3-wire can't work,
+	 * 2006.06.27, by rcnjko.
+	 */
 	write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
 	write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
 	write_nic_word(dev, ANAPARAM3, 0x0010);
@@ -1225,7 +1348,8 @@
 	/*
 	 *	We assume RegWirelessMode has already been initialized before,
 	 *	however, we has to validate the wireless mode here and provide a
-	 *	reasonable initialized value if necessary. 2005.01.13, by rcnjko.
+	 *	reasonable initialized value if necessary. 2005.01.13,
+	 *	by rcnjko.
 	 */
 	SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 	if ((ieee->mode != WIRELESS_MODE_B) &&
@@ -1272,14 +1396,15 @@
 		MgntActSet_RF_State(dev, eRfOn, 0);
 	}
 		/*
-		 *	If inactive power mode is enabled, disable rf while in disconnected state.
+		 * If inactive power mode is enabled, disable rf while in
+		 * disconnected state.
 		 */
 	if (priv->bInactivePs)
 		MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS);
 
 	ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
 
-	/* ----------------------------------------------------------------------------- */
+	/* ----------------------------------------------------------------- */
 
 	rtl8185b_irq_enable(dev);
 
@@ -1296,14 +1421,15 @@
 	if (dev->flags & IFF_PROMISC)
 		DMESG("NIC in promisc mode");
 
-	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
-	   dev->flags & IFF_PROMISC) {
+	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || dev->flags &
+	    IFF_PROMISC) {
 		priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
 		priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
 	}
 
 	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR)
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF | RCR_APWRMGT | RCR_AICV;
+		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF |
+				      RCR_APWRMGT | RCR_AICV;
 
 
 	if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
diff --git a/drivers/staging/rtl8188eu/Makefile b/drivers/staging/rtl8188eu/Makefile
index 1639a45..0a617b4 100644
--- a/drivers/staging/rtl8188eu/Makefile
+++ b/drivers/staging/rtl8188eu/Makefile
@@ -1,5 +1,3 @@
-EXTRA_CFLAGS += -I$(src)/include
-
 r8188eu-y :=				\
 		core/rtw_ap.o		\
 		core/rtw_br_ext.o	\
@@ -30,7 +28,6 @@
 		hal/HalPhyRf.o		\
 		hal/HalPhyRf_8188e.o	\
 		hal/HalPwrSeqCmd.o	\
-		hal/Hal8188EFWImg_CE.o	\
 		hal/Hal8188EPwrSeq.o	\
 		hal/Hal8188ERateAdaptive.o\
 		hal/hal_intf.o		\
@@ -67,4 +64,4 @@
 
 obj-$(CONFIG_R8188EU)	:= r8188eu.o
 
-ccflags-y += -D__CHECK_ENDIAN__
+ccflags-y += -D__CHECK_ENDIAN__ -I$(src)/include
diff --git a/drivers/staging/rtl8188eu/TODO b/drivers/staging/rtl8188eu/TODO
index e50aa50..f7f389c 100644
--- a/drivers/staging/rtl8188eu/TODO
+++ b/drivers/staging/rtl8188eu/TODO
@@ -2,7 +2,6 @@
 - find and remove remaining code valid only for 5 HGz. Most of the obvious
   ones have been removed, but things like channel > 14 still exist.
 - find and remove any code for other chips that is left over
-- convert to external firmware
 - convert any remaining unusual variable types
 - find codes that can use %pM and %Nph formatting
 - checkpatch.pl fixes - most of the remaining ones are lines too long. Many
diff --git a/drivers/staging/rtl8188eu/core/rtw_ap.c b/drivers/staging/rtl8188eu/core/rtw_ap.c
index 2c73823..2c678f4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ap.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ap.c
@@ -348,7 +348,7 @@
 
 			if (psta->state & WIFI_SLEEP_STATE) {
 				if (!(psta->state & WIFI_STA_ALIVE_CHK_STATE)) {
-					/* to check if alive by another methods if staion is at ps mode. */
+					/* to check if alive by another methods if station is at ps mode. */
 					psta->expire_to = pstapriv->expire_to;
 					psta->state |= WIFI_STA_ALIVE_CHK_STATE;
 
diff --git a/drivers/staging/rtl8188eu/core/rtw_br_ext.c b/drivers/staging/rtl8188eu/core/rtw_br_ext.c
index fbca394..9f40742 100644
--- a/drivers/staging/rtl8188eu/core/rtw_br_ext.c
+++ b/drivers/staging/rtl8188eu/core/rtw_br_ext.c
@@ -527,7 +527,7 @@
 		case NAT25_CHECK:
 			return -1;
 		case NAT25_INSERT:
-			/* some muticast with source IP is all zero, maybe other case is illegal */
+			/* some multicast with source IP is all zero, maybe other case is illegal */
 			/* in class A, B, C, host address is all zero or all one is illegal */
 			if (iph->saddr == 0)
 				return 0;
@@ -677,9 +677,8 @@
 			switch (method) {
 			case NAT25_CHECK:
 				if (!memcmp(skb->data+ETH_ALEN, ipx->ipx_source.node, ETH_ALEN))
-				DEBUG_INFO("NAT25: Check IPX skb_copy\n");
+					DEBUG_INFO("NAT25: Check IPX skb_copy\n");
 				return 0;
-				return -1;
 			case NAT25_INSERT:
 				DEBUG_INFO("NAT25: Insert IPX, Dest =%08x,%02x%02x%02x%02x%02x%02x,%04x Source =%08x,%02x%02x%02x%02x%02x%02x,%04x\n",
 					ipx->ipx_dest.net,
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 9632ef4..f45f4ed 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -218,7 +218,7 @@
 _func_exit_;
 }
 
-int rtw_cmd_filter(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj)
+static int rtw_cmd_filter(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj)
 {
 	u8 bAllow = false; /* set to true to allow enqueuing cmd when hw_init_completed is false */
 
@@ -1162,7 +1162,7 @@
 	else
 		memcpy(&psetstakey_para->key, &psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey, 16);
 
-	/* jeff: set this becasue at least sw key is ready */
+	/* jeff: set this because at least sw key is ready */
 	padapter->securitypriv.busetkipkey = true;
 
 	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
@@ -1667,7 +1667,7 @@
 	pmlmepriv->LinkDetectInfo.bHigherBusyTxTraffic = bHigherBusyTxTraffic;
 }
 
-void dynamic_chk_wk_hdl(struct adapter *padapter, u8 *pbuf, int sz)
+static void dynamic_chk_wk_hdl(struct adapter *padapter, u8 *pbuf, int sz)
 {
 	struct mlme_priv *pmlmepriv;
 
diff --git a/drivers/staging/rtl8188eu/core/rtw_efuse.c b/drivers/staging/rtl8188eu/core/rtw_efuse.c
index 869434c..806f56f 100644
--- a/drivers/staging/rtl8188eu/core/rtw_efuse.c
+++ b/drivers/staging/rtl8188eu/core/rtw_efuse.c
@@ -159,7 +159,7 @@
 /*  */
 /* 	Description: */
 /* 		Execute E-Fuse read byte operation. */
-/* 		Refered from SD1 Richard. */
+/* 		Referred from SD1 Richard. */
 /*  */
 /* 	Assumption: */
 /* 		1. Boot from E-Fuse and successfully auto-load. */
@@ -214,7 +214,7 @@
 /* 	Description: */
 /* 		1. Execute E-Fuse read byte operation according as map offset and */
 /* 		    save to E-Fuse table. */
-/* 		2. Refered from SD1 Richard. */
+/* 		2. Referred from SD1 Richard. */
 /*  */
 /* 	Assumption: */
 /* 		1. Boot from E-Fuse and successfully auto-load. */
@@ -542,7 +542,7 @@
 {
 	u8 offset, word_en;
 	u8 *map;
-	u8 newdata[PGPKT_DATA_SIZE];
+	u8 newdata[PGPKT_DATA_SIZE + 1];
 	s32	i, idx;
 	u8 ret = _SUCCESS;
 	u16 mapLen = 0;
@@ -564,7 +564,7 @@
 
 	offset = (addr >> 3);
 	word_en = 0xF;
-	_rtw_memset(newdata, 0xFF, PGPKT_DATA_SIZE);
+	_rtw_memset(newdata, 0xFF, PGPKT_DATA_SIZE + 1);
 	i = addr & 0x7;	/*  index of one package */
 	idx = 0;	/*  data index */
 
@@ -634,7 +634,7 @@
 {
 	u8 offset, word_en;
 	u8 *map;
-	u8 newdata[PGPKT_DATA_SIZE];
+	u8 newdata[PGPKT_DATA_SIZE + 1];
 	s32	i, idx;
 	u8 ret = _SUCCESS;
 	u16 mapLen = 0;
@@ -656,7 +656,7 @@
 
 	offset = (addr >> 3);
 	word_en = 0xF;
-	_rtw_memset(newdata, 0xFF, PGPKT_DATA_SIZE);
+	_rtw_memset(newdata, 0xFF, PGPKT_DATA_SIZE + 1);
 	i = addr & 0x7;	/*  index of one package */
 	idx = 0;	/*  data index */
 
diff --git a/drivers/staging/rtl8188eu/core/rtw_ieee80211.c b/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
index 6fc7742..e6f98fb 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
@@ -1129,7 +1129,7 @@
 		mac[3] = 0x87;
 		mac[4] = 0x00;
 		mac[5] = 0x00;
-		/*  use default mac addresss */
+		/*  use default mac address */
 		memcpy(mac_addr, mac, ETH_ALEN);
 		DBG_88E("MAC Address from efuse error, assign default one !!!\n");
 	}
diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme.c b/drivers/staging/rtl8188eu/core/rtw_mlme.c
index ea66071..ac3535d 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mlme.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mlme.c
@@ -557,7 +557,7 @@
 			sq_final = ((u32)(src->PhyInfo.SignalQuality)+(u32)(dst->PhyInfo.SignalQuality)*4)/5;
 			rssi_final = (src->Rssi+dst->Rssi*4)/5;
 		} else {
-			/* bss info not receving from the right channel, use the original RX signal infos */
+			/* bss info not receiving from the right channel, use the original RX signal infos */
 			ss_final = dst->PhyInfo.SignalStrength;
 			sq_final = dst->PhyInfo.SignalQuality;
 			rssi_final = dst->Rssi;
@@ -636,7 +636,7 @@
 			pnetwork->aid = 0;
 			pnetwork->join_res = 0;
 
-			/* bss info not receving from the right channel */
+			/* bss info not receiving from the right channel */
 			if (pnetwork->network.PhyInfo.SignalQuality == 101)
 				pnetwork->network.PhyInfo.SignalQuality = 0;
 		} else {
@@ -656,7 +656,7 @@
 
 			pnetwork->last_scanned = rtw_get_current_time();
 
-			/* bss info not receving from the right channel */
+			/* bss info not receiving from the right channel */
 			if (pnetwork->network.PhyInfo.SignalQuality == 101)
 				pnetwork->network.PhyInfo.SignalQuality = 0;
 			rtw_list_insert_tail(&(pnetwork->list), &(queue->queue));
@@ -670,7 +670,7 @@
 
 		pnetwork->last_scanned = rtw_get_current_time();
 
-		/* target.Reserved[0]== 1, means that scaned network is a bcn frame. */
+		/* target.Reserved[0]== 1, means that scanned network is a bcn frame. */
 		if ((pnetwork->network.IELength > target->IELength) && (target->Reserved[0] == 1))
 			update_ie = false;
 
@@ -1130,7 +1130,7 @@
 			padapter->securitypriv.wps_ie_len = 0;
 		}
 		/* for A-MPDU Rx reordering buffer control for bmc_sta & sta_info */
-		/* if A-MPDU Rx is enabled, reseting  rx_ordering_ctrl wstart_b(indicate_seq) to default value = 0xffff */
+		/* if A-MPDU Rx is enabled, resetting  rx_ordering_ctrl wstart_b(indicate_seq) to default value = 0xffff */
 		/* todo: check if AP can send A-MPDU packets */
 		for (i = 0; i < 16; i++) {
 			/* preorder_ctrl = &precvpriv->recvreorder_ctrl[i]; */
@@ -1210,7 +1210,7 @@
 	rtw_update_ht_cap(padapter, cur_network->network.IEs, cur_network->network.IELength);
 }
 
-/* Notes: the fucntion could be > passive_level (the same context as Rx tasklet) */
+/* Notes: the function could be > passive_level (the same context as Rx tasklet) */
 /* pnetwork: returns from rtw_joinbss_event_callback */
 /* ptarget_wlan: found from scanned_queue */
 /* if join_res > 0, for (fw_state == WIFI_STATION_STATE), we check if  "ptarget_sta" & "ptarget_wlan" exist. */
@@ -2177,7 +2177,7 @@
 _func_exit_;
 }
 
-/* the fucntion is at passive_level */
+/* the function is at passive_level */
 void rtw_joinbss_reset(struct adapter *padapter)
 {
 	u8	threshold;
@@ -2205,7 +2205,7 @@
 	}
 }
 
-/* the fucntion is >= passive_level */
+/* the function is >= passive_level */
 unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len)
 {
 	u32 ielen, out_len;
@@ -2273,7 +2273,7 @@
 	return phtpriv->ht_option;
 }
 
-/* the fucntion is > passive_level (in critical_section) */
+/* the function is > passive_level (in critical_section) */
 void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len)
 {
 	u8 *p, max_ampdu_sz;
@@ -2332,7 +2332,7 @@
 			else
 				pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i];
 		}
-		/* switch to the 40M Hz mode accoring to the AP */
+		/* switch to the 40M Hz mode according to the AP */
 		pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
 		switch ((pmlmeinfo->HT_info.infos[0] & 0x3)) {
 		case HT_EXTCHNL_OFFSET_UPPER:
diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
index 4b2eb8e..7ab5ff0 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
@@ -1852,7 +1852,7 @@
 	struct pkt_attrib *pattrib;
 	unsigned char *pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short *fctrl;
+	__le16 *fctrl;
 	struct xmit_priv *pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
@@ -2199,7 +2199,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
@@ -2349,7 +2349,7 @@
 	if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT)) {
 		/*	Commented by Albert 2011/03/08 */
 		/*	According to the P2P specification */
-		/*	if the sending device will be client, the P2P Capability should be reserved of group negotation response frame */
+		/*	if the sending device will be client, the P2P Capability should be reserved of group negotiation response frame */
 		p2pie[p2pielen++] = 0;
 	} else {
 		/*	Be group owner or meet the error case */
@@ -2561,7 +2561,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
@@ -2729,7 +2729,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
@@ -2981,7 +2981,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
@@ -3175,7 +3175,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
@@ -3283,7 +3283,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	unsigned char					*mac;
 	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
@@ -3534,7 +3534,7 @@
 	struct pkt_attrib		*pattrib;
 	unsigned char			*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short		*fctrl;
+	__le16 *fctrl;
 	unsigned char			*mac;
 	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
@@ -4484,7 +4484,7 @@
 	struct pkt_attrib	*pattrib;
 	unsigned char	*pframe;
 	struct rtw_ieee80211_hdr *pwlanhdr;
-	unsigned short *fctrl;
+	__le16 *fctrl;
 	unsigned int	rate_len;
 	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
 #if defined(CONFIG_88EU_AP_MODE)
@@ -4713,7 +4713,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	unsigned char					*mac, *bssid;
 	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
 #if defined (CONFIG_88EU_AP_MODE)
@@ -4876,7 +4876,7 @@
 	struct pkt_attrib		*pattrib;
 	unsigned char			*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short		*fctrl;
+	__le16 *fctrl;
 	unsigned char			*mac;
 	unsigned char			bssrate[NumRates];
 	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
@@ -5013,7 +5013,7 @@
 	struct pkt_attrib *pattrib;
 	unsigned char *pframe;
 	struct rtw_ieee80211_hdr *pwlanhdr;
-	unsigned short *fctrl;
+	__le16 *fctrl;
 	unsigned int val32;
 	u16 val16;
 #ifdef CONFIG_88EU_AP_MODE
@@ -5153,7 +5153,7 @@
 	struct pkt_attrib *pattrib;
 	unsigned char	*pbuf, *pframe;
 	unsigned short val;
-	unsigned short *fctrl;
+	__le16 *fctrl;
 	struct xmit_priv *pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
 	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
@@ -5290,7 +5290,7 @@
 	struct pkt_attrib	*pattrib;
 	unsigned char		*pframe, *p;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short	*fctrl;
+	__le16 *fctrl;
 	__le16		le_tmp;
 	unsigned int	i, j, ie_len, index = 0;
 	unsigned char	rf_type, bssrate[NumRates], sta_bssrate[NumRates];
@@ -5625,7 +5625,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv	*pxmitpriv;
 	struct mlme_ext_priv	*pmlmeext;
 	struct mlme_ext_info	*pmlmeinfo;
@@ -5740,7 +5740,8 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl, *qc;
+	__le16 *fctrl;
+	unsigned short *qc;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
@@ -5860,7 +5861,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
@@ -5972,7 +5973,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char				*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short			*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 
@@ -6040,7 +6041,7 @@
 	struct pkt_attrib *pattrib;
 	u8 *pframe;
 	struct rtw_ieee80211_hdr *pwlanhdr;
-	u16 *fctrl;
+	__le16 *fctrl;
 	struct xmit_priv *pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
 	struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
@@ -6162,7 +6163,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char				*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short			*fctrl;
+	__le16 *fctrl;
 	struct	wlan_network	*pnetwork = NULL;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
@@ -6698,7 +6699,7 @@
 		}
 	}
 
-	/*  mark bss info receving from nearby channel as SignalQuality 101 */
+	/*  mark bss info receiving from nearby channel as SignalQuality 101 */
 	if (bssid->Configuration.DSConfig != rtw_get_oper_ch(padapter))
 		bssid->PhyInfo.SignalQuality = 101;
 	return _SUCCESS;
@@ -8110,7 +8111,7 @@
 		Save_DM_Func_Flag(padapter);
 		Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);
 
-		/* config the initial gain under scaning, need to write the BB registers */
+		/* config the initial gain under scanning, need to write the BB registers */
 #ifdef CONFIG_88EU_P2P
 		if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
 			initialgain = 0x1E;
diff --git a/drivers/staging/rtl8188eu/core/rtw_p2p.c b/drivers/staging/rtl8188eu/core/rtw_p2p.c
index 8cf915f..f46cab1 100644
--- a/drivers/staging/rtl8188eu/core/rtw_p2p.c
+++ b/drivers/staging/rtl8188eu/core/rtw_p2p.c
@@ -135,7 +135,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct adapter *padapter = pwdinfo->padapter;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
@@ -192,7 +192,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct adapter *padapter = pwdinfo->padapter;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
@@ -272,7 +272,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
 
@@ -342,7 +342,7 @@
 	struct pkt_attrib			*pattrib;
 	unsigned char					*pframe;
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	unsigned short				*fctrl;
+	__le16 *fctrl;
 	struct adapter *padapter = pwdinfo->padapter;
 	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
 	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
diff --git a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
index 58a1661..b45461f 100644
--- a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
+++ b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
@@ -193,7 +193,7 @@
 	if (pwrpriv->ips_mode_req == IPS_NONE)
 		goto exit;
 
-	if (rtw_pwr_unassociated_idle(padapter) == false)
+	if (!rtw_pwr_unassociated_idle(padapter))
 		goto exit;
 
 	if ((pwrpriv->rf_pwrstate == rf_on) && ((pwrpriv->pwr_state_check_cnts%4) == 0)) {
diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index 2011657..9f0f30f7 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -204,11 +204,14 @@
 int rtw_free_recvframe(union recv_frame *precvframe, struct __queue *pfree_recv_queue)
 {
 	unsigned long irqL;
-	struct adapter *padapter = precvframe->u.hdr.adapter;
-	struct recv_priv *precvpriv = &padapter->recvpriv;
+	struct adapter *padapter;
+	struct recv_priv *precvpriv;
 
 _func_enter_;
-
+	if (!precvframe)
+		return _FAIL;
+	padapter = precvframe->u.hdr.adapter;
+	precvpriv = &padapter->recvpriv;
 	if (precvframe->u.hdr.pkt) {
 		dev_kfree_skb_any(precvframe->u.hdr.pkt);/* free skb by driver */
 		precvframe->u.hdr.pkt = NULL;
@@ -1583,7 +1586,7 @@
 
 		pfhdr->attrib.icv_len = pnfhdr->attrib.icv_len;
 		plist = get_next(plist);
-	};
+	}
 
 	/* free the defrag_q queue and return the prframe */
 	rtw_free_recvframe_queue(defrag_q, pfree_recv_queue);
@@ -1798,16 +1801,14 @@
 			memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst, ETH_ALEN);
 		}
 
-		/* Indicat the packets to upper layer */
-		if (sub_skb) {
-			/*  Insert NAT2.5 RX here! */
-			sub_skb->protocol = eth_type_trans(sub_skb, padapter->pnetdev);
-			sub_skb->dev = padapter->pnetdev;
+		/* Indicate the packets to upper layer */
+		/*  Insert NAT2.5 RX here! */
+		sub_skb->protocol = eth_type_trans(sub_skb, padapter->pnetdev);
+		sub_skb->dev = padapter->pnetdev;
 
-			sub_skb->ip_summed = CHECKSUM_NONE;
+		sub_skb->ip_summed = CHECKSUM_NONE;
 
-			netif_rx(sub_skb);
-		}
+		netif_rx(sub_skb);
 	}
 
 exit:
diff --git a/drivers/staging/rtl8188eu/core/rtw_security.c b/drivers/staging/rtl8188eu/core/rtw_security.c
index 0f076d0..e088457 100644
--- a/drivers/staging/rtl8188eu/core/rtw_security.c
+++ b/drivers/staging/rtl8188eu/core/rtw_security.c
@@ -916,7 +916,7 @@
 			add1b[i] = 0x00;
 	}
 
-	swap_halfs[0] = in[2];    /* Swap halfs */
+	swap_halfs[0] = in[2];    /* Swap halves */
 	swap_halfs[1] = in[3];
 	swap_halfs[2] = in[0];
 	swap_halfs[3] = in[1];
diff --git a/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c b/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c
index c2977be..cd3c9a7 100644
--- a/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c
+++ b/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c
@@ -267,9 +267,8 @@
 
 		rtw_mfree_sta_priv_lock(pstapriv);
 
-		if (pstapriv->pallocated_stainfo_buf) {
+		if (pstapriv->pallocated_stainfo_buf)
 			rtw_vmfree(pstapriv->pallocated_stainfo_buf, sizeof(struct sta_info)*NUM_STA+4);
-		}
 	}
 
 _func_exit_;
@@ -315,7 +314,7 @@
 
 		rtw_list_insert_tail(&psta->hash_list, phash_list);
 
-		pstapriv->asoc_sta_count++ ;
+		pstapriv->asoc_sta_count++;
 
 		_exit_critical_bh(&(pstapriv->sta_hash_lock), &irql2);
 
@@ -419,7 +418,7 @@
 	_cancel_timer_ex(&psta->addba_retry_timer);
 
 	/* for A-MPDU Rx reordering buffer control, cancel reordering_ctrl_timer */
-	for (i = 0; i < 16 ; i++) {
+	for (i = 0; i < 16; i++) {
 		unsigned long irql;
 		struct list_head *phead, *plist;
 		union recv_frame *prframe;
diff --git a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
index 8018edd..153ec61 100644
--- a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
+++ b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
@@ -80,7 +80,7 @@
 	for (i = 0; i < ratelen; i++) {
 		if  ((((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) &&
 			   (((rate[i]) & 0x7f) != 11)  && (((rate[i]) & 0x7f) != 22))
-		return false;
+			return false;
 	}
 
 	return true;
@@ -766,7 +766,7 @@
 
 	for (i = 0; i < (pIE->Length); i++) {
 		if (i != 2) {
-			/* 	Got the endian issue here. */
+			/*	Got the endian issue here. */
 			pmlmeinfo->HT_caps.u.HT_cap[i] &= (pIE->data[i]);
 		} else {
 			/* modify from  fw by Thomas 2010/11/17 */
@@ -1096,13 +1096,13 @@
 	}
 
 	kfree(bssid);
+	_func_exit_;
 	return _SUCCESS;
 
 _mismatch:
 	kfree(bssid);
-	return _FAIL;
-
 	_func_exit_;
+	return _FAIL;
 }
 
 void update_beacon_info(struct adapter *padapter, u8 *pframe, uint pkt_len, struct sta_info *psta)
@@ -1186,7 +1186,7 @@
 			case _RSN_IE_2_:
 				if  ((_rtw_memcmp((pIE->data + 8), RSN_CIPHER_SUITE_CCMP, 4))  ||
 				       (_rtw_memcmp((pIE->data + 12), RSN_CIPHER_SUITE_CCMP, 4)))
-				return false;
+					return false;
 			default:
 				break;
 			}
@@ -1368,21 +1368,21 @@
 #ifdef CONFIG_88EU_P2P
 	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
 
-	/* 	Added by Albert 2011/03/22 */
-	/* 	In the P2P mode, the driver should not support the b mode. */
-	/* 	So, the Tx packet shouldn't use the CCK rate */
+	/*	Added by Albert 2011/03/22 */
+	/*	In the P2P mode, the driver should not support the b mode. */
+	/*	So, the Tx packet shouldn't use the CCK rate */
 	if (!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
 		return;
 #endif /* CONFIG_88EU_P2P */
 	_rtw_memset(supported_rates, 0, NDIS_802_11_LENGTH_RATES_EX);
 
-	if ((wirelessmode & WIRELESS_11B) && (wirelessmode == WIRELESS_11B)) {
+	if ((wirelessmode & WIRELESS_11B) && (wirelessmode == WIRELESS_11B))
 		memcpy(supported_rates, rtw_basic_rate_cck, 4);
-	} else if (wirelessmode & WIRELESS_11B) {
+	else if (wirelessmode & WIRELESS_11B)
 		memcpy(supported_rates, rtw_basic_rate_mix, 7);
-	} else {
+	else
 		memcpy(supported_rates, rtw_basic_rate_ofdm, 3);
-	}
+
 
 	if (wirelessmode & WIRELESS_11B)
 		update_mgnt_tx_rate(padapter, IEEE80211_CCK_RATE_1MB);
@@ -1435,7 +1435,7 @@
 				DBG_88E("link to Airgo Cap\n");
 				return HT_IOT_PEER_AIRGO;
 			} else if (_rtw_memcmp(pIE->data, EPIGRAM_OUI, 3)) {
-				 epigram_vendor_flag = 1;
+				epigram_vendor_flag = 1;
 				if (ralink_vendor_flag) {
 					DBG_88E("link to Tenda W311R AP\n");
 					 return HT_IOT_PEER_TENDA;
diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index bb5cd95..a594e51 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -1556,7 +1556,7 @@
 	xmitframe_phead = get_list_head(pframe_queue);
 	xmitframe_plist = get_next(xmitframe_phead);
 
-	while (!rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) {
+	if (!rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) {
 		pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
 
 		xmitframe_plist = get_next(xmitframe_plist);
@@ -1564,12 +1564,7 @@
 		rtw_list_delete(&pxmitframe->list);
 
 		ptxservq->qcnt--;
-
-		break;
-
-		pxmitframe = NULL;
 	}
-
 	return pxmitframe;
 }
 
diff --git a/drivers/staging/rtl8188eu/hal/Hal8188EFWImg_CE.c b/drivers/staging/rtl8188eu/hal/Hal8188EFWImg_CE.c
deleted file mode 100644
index 95759be..0000000
--- a/drivers/staging/rtl8188eu/hal/Hal8188EFWImg_CE.c
+++ /dev/null
@@ -1,1761 +0,0 @@
-/******************************************************************************
-*
-* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of version 2 of the GNU General Public License as
-* published by the Free Software Foundation.
-*
-* This program is distributed in the hope that it will be useful, but WITHOUT
-* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-* more details.
-*
-* You should have received a copy of the GNU General Public License along with
-* this program; if not, write to the Free Software Foundation, Inc.,
-* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
-*
-*
-******************************************************************************/
-#include "odm_precomp.h"
-
-const u8 Rtl8188EFwImgArray[Rtl8188EFWImgArrayLength] = {
-	0xE1, 0x88, 0x10, 0x00, 0x0B, 0x00, 0x01, 0x00,
-	0x01, 0x21, 0x11, 0x27, 0x30, 0x36, 0x00, 0x00,
-	0x2D, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x02, 0x45, 0x4E, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0xC1, 0x6F, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0xA1, 0xE6, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x02, 0x56, 0xF7, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0xC2, 0xAF, 0x80, 0xFE, 0x32, 0x12, 0x42, 0x04,
-	0x85, 0xD0, 0x0B, 0x75, 0xD0, 0x08, 0xAA, 0xE0,
-	0xC2, 0x8C, 0xE5, 0x8A, 0x24, 0x67, 0xF5, 0x8A,
-	0xE5, 0x8C, 0x34, 0x79, 0xF5, 0x8C, 0xD2, 0x8C,
-	0xEC, 0x24, 0x89, 0xF8, 0xE6, 0xBC, 0x03, 0x02,
-	0x74, 0xFF, 0xC3, 0x95, 0x81, 0xB4, 0x40, 0x00,
-	0x40, 0xCE, 0x79, 0x04, 0x78, 0x80, 0x16, 0xE6,
-	0x08, 0x70, 0x0B, 0xC2, 0xAF, 0xE6, 0x30, 0xE1,
-	0x03, 0x44, 0x18, 0xF6, 0xD2, 0xAF, 0x08, 0xD9,
-	0xED, 0xEA, 0x8B, 0xD0, 0x22, 0xE5, 0x0C, 0xFF,
-	0x23, 0x24, 0x81, 0xF8, 0x0F, 0x08, 0x08, 0xBF,
-	0x04, 0x04, 0x7F, 0x00, 0x78, 0x81, 0xE6, 0x30,
-	0xE4, 0xF2, 0x00, 0xE5, 0x0C, 0xC3, 0x9F, 0x50,
-	0x20, 0x05, 0x0C, 0x74, 0x88, 0x25, 0x0C, 0xF8,
-	0xE6, 0xFD, 0xA6, 0x81, 0x08, 0xE6, 0xAE, 0x0C,
-	0xBE, 0x03, 0x02, 0x74, 0xFF, 0xCD, 0xF8, 0xE8,
-	0x6D, 0x60, 0xE0, 0x08, 0xE6, 0xC0, 0xE0, 0x80,
-	0xF6, 0xE5, 0x0C, 0xD3, 0x9F, 0x40, 0x27, 0xE5,
-	0x0C, 0x24, 0x89, 0xF8, 0xE6, 0xAE, 0x0C, 0xBE,
-	0x03, 0x02, 0x74, 0xFF, 0xFD, 0x18, 0xE6, 0xCD,
-	0xF8, 0xE5, 0x81, 0x6D, 0x60, 0x06, 0xD0, 0xE0,
-	0xF6, 0x18, 0x80, 0xF5, 0xE5, 0x0C, 0x24, 0x88,
-	0xC8, 0xF6, 0x15, 0x0C, 0x80, 0xD3, 0xE5, 0x0C,
-	0x23, 0x24, 0x81, 0xF8, 0x7F, 0x04, 0xC2, 0xAF,
-	0xE6, 0x30, 0xE0, 0x03, 0x10, 0xE2, 0x0C, 0x7F,
-	0x00, 0x30, 0xE1, 0x07, 0x30, 0xE3, 0x04, 0x7F,
-	0x08, 0x54, 0xF4, 0x54, 0x7C, 0xC6, 0xD2, 0xAF,
-	0x54, 0x80, 0x42, 0x07, 0x22, 0x78, 0x88, 0xA6,
-	0x81, 0x74, 0x03, 0x60, 0x06, 0xFF, 0x08, 0x76,
-	0xFF, 0xDF, 0xFB, 0x7F, 0x04, 0xE4, 0x78, 0x80,
-	0xF6, 0x08, 0xF6, 0x08, 0xDF, 0xFA, 0x78, 0x81,
-	0x76, 0x30, 0x90, 0x45, 0xDE, 0x74, 0x01, 0x93,
-	0xC0, 0xE0, 0xE4, 0x93, 0xC0, 0xE0, 0x43, 0x89,
-	0x01, 0x75, 0x8A, 0x60, 0x75, 0x8C, 0x79, 0xD2,
-	0x8C, 0xD2, 0xAF, 0x22, 0x03, 0xEF, 0xD3, 0x94,
-	0x03, 0x40, 0x03, 0x7F, 0xFF, 0x22, 0x74, 0x81,
-	0x2F, 0x2F, 0xF8, 0xE6, 0x20, 0xE5, 0xF4, 0xC2,
-	0xAF, 0xE6, 0x44, 0x30, 0xF6, 0xD2, 0xAF, 0xAE,
-	0x0C, 0xEE, 0xC3, 0x9F, 0x50, 0x21, 0x0E, 0x74,
-	0x88, 0x2E, 0xF8, 0xE6, 0xF9, 0x08, 0xE6, 0x18,
-	0xBE, 0x03, 0x02, 0x74, 0xFF, 0xFD, 0xED, 0x69,
-	0x60, 0x09, 0x09, 0xE7, 0x19, 0x19, 0xF7, 0x09,
-	0x09, 0x80, 0xF3, 0x16, 0x16, 0x80, 0xDA, 0xEE,
-	0xD3, 0x9F, 0x40, 0x04, 0x05, 0x81, 0x05, 0x81,
-	0xEE, 0xD3, 0x9F, 0x40, 0x22, 0x74, 0x88, 0x2E,
-	0xF8, 0x08, 0xE6, 0xF9, 0xEE, 0xB5, 0x0C, 0x02,
-	0xA9, 0x81, 0x18, 0x06, 0x06, 0xE6, 0xFD, 0xED,
-	0x69, 0x60, 0x09, 0x19, 0x19, 0xE7, 0x09, 0x09,
-	0xF7, 0x19, 0x80, 0xF3, 0x1E, 0x80, 0xD9, 0xEF,
-	0x24, 0x88, 0xF8, 0xE6, 0x04, 0xF8, 0xEF, 0x2F,
-	0x04, 0x90, 0x45, 0xDE, 0x93, 0xF6, 0x08, 0xEF,
-	0x2F, 0x93, 0xF6, 0x7F, 0x00, 0x22, 0xEF, 0xD3,
-	0x94, 0x03, 0x40, 0x03, 0x7F, 0xFF, 0x22, 0xEF,
-	0x23, 0x24, 0x81, 0xF8, 0xE6, 0x30, 0xE5, 0xF4,
-	0xC2, 0xAF, 0xE6, 0x54, 0x8C, 0xF6, 0xD2, 0xAF,
-	0xE5, 0x0C, 0xB5, 0x07, 0x0A, 0x74, 0x88, 0x2F,
-	0xF8, 0xE6, 0xF5, 0x81, 0x02, 0x42, 0x4D, 0x50,
-	0x2E, 0x74, 0x89, 0x2F, 0xF8, 0xE6, 0xBF, 0x03,
-	0x02, 0x74, 0xFF, 0xFD, 0x18, 0xE6, 0xF9, 0x74,
-	0x88, 0x2F, 0xF8, 0xFB, 0xE6, 0xFC, 0xE9, 0x6C,
-	0x60, 0x08, 0xA8, 0x05, 0xE7, 0xF6, 0x1D, 0x19,
-	0x80, 0xF4, 0xA8, 0x03, 0xA6, 0x05, 0x1F, 0xE5,
-	0x0C, 0xB5, 0x07, 0xE3, 0x7F, 0x00, 0x22, 0x74,
-	0x89, 0x2F, 0xF8, 0xE6, 0xFD, 0x18, 0x86, 0x01,
-	0x0F, 0x74, 0x88, 0x2F, 0xF8, 0xA6, 0x01, 0x08,
-	0x86, 0x04, 0xE5, 0x0C, 0xB5, 0x07, 0x02, 0xAC,
-	0x81, 0xED, 0x6C, 0x60, 0x08, 0x0D, 0x09, 0xA8,
-	0x05, 0xE6, 0xF7, 0x80, 0xF4, 0xE5, 0x0C, 0xB5,
-	0x07, 0xDE, 0x89, 0x81, 0x7F, 0x00, 0x22, 0xEF,
-	0xD3, 0x94, 0x03, 0x40, 0x03, 0x7F, 0xFF, 0x22,
-	0xEF, 0x23, 0x24, 0x81, 0xF8, 0xC2, 0xAF, 0xE6,
-	0x30, 0xE5, 0x05, 0x30, 0xE0, 0x02, 0xD2, 0xE4,
-	0xD2, 0xE2, 0xC6, 0xD2, 0xAF, 0x7F, 0x00, 0x30,
-	0xE2, 0x01, 0x0F, 0x02, 0x42, 0x4C, 0x8F, 0xF0,
-	0xE4, 0xFF, 0xFE, 0xE5, 0x0C, 0x23, 0x24, 0x80,
-	0xF8, 0xC2, 0xA9, 0x30, 0xF7, 0x0D, 0x7F, 0x08,
-	0xE6, 0x60, 0x0B, 0x2D, 0xF6, 0x60, 0x30, 0x50,
-	0x2E, 0x80, 0x07, 0x30, 0xF1, 0x06, 0xED, 0xF6,
-	0x60, 0x25, 0x7E, 0x02, 0x08, 0x30, 0xF0, 0x10,
-	0xC2, 0xAF, 0xE6, 0x10, 0xE7, 0x23, 0x0E, 0x30,
-	0xE2, 0x0C, 0xD2, 0xAF, 0x7F, 0x04, 0x80, 0x12,
-	0xC2, 0xAF, 0xE6, 0x10, 0xE7, 0x13, 0x54, 0xEC,
-	0x4E, 0xF6, 0xD2, 0xAF, 0x02, 0x42, 0x4D, 0x7F,
-	0x08, 0x08, 0xEF, 0x44, 0x83, 0xF4, 0xC2, 0xAF,
-	0x56, 0xC6, 0xD2, 0xAF, 0x54, 0x80, 0x4F, 0xFF,
-	0x22, 0xC5, 0xF0, 0xF8, 0xA3, 0xE0, 0x28, 0xF0,
-	0xC5, 0xF0, 0xF8, 0xE5, 0x82, 0x15, 0x82, 0x70,
-	0x02, 0x15, 0x83, 0xE0, 0x38, 0xF0, 0x22, 0xEF,
-	0x5B, 0xFF, 0xEE, 0x5A, 0xFE, 0xED, 0x59, 0xFD,
-	0xEC, 0x58, 0xFC, 0x22, 0xEF, 0x4B, 0xFF, 0xEE,
-	0x4A, 0xFE, 0xED, 0x49, 0xFD, 0xEC, 0x48, 0xFC,
-	0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0,
-	0xFE, 0xA3, 0xE0, 0xFF, 0x22, 0xE2, 0xFC, 0x08,
-	0xE2, 0xFD, 0x08, 0xE2, 0xFE, 0x08, 0xE2, 0xFF,
-	0x22, 0xE2, 0xFB, 0x08, 0xE2, 0xF9, 0x08, 0xE2,
-	0xFA, 0x08, 0xE2, 0xCB, 0xF8, 0x22, 0xEC, 0xF2,
-	0x08, 0xED, 0xF2, 0x08, 0xEE, 0xF2, 0x08, 0xEF,
-	0xF2, 0x22, 0xA4, 0x25, 0x82, 0xF5, 0x82, 0xE5,
-	0xF0, 0x35, 0x83, 0xF5, 0x83, 0x22, 0xE0, 0xFB,
-	0xA3, 0xE0, 0xFA, 0xA3, 0xE0, 0xF9, 0x22, 0xEB,
-	0xF0, 0xA3, 0xEA, 0xF0, 0xA3, 0xE9, 0xF0, 0x22,
-	0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, 0x93, 0x70,
-	0x12, 0x74, 0x01, 0x93, 0x70, 0x0D, 0xA3, 0xA3,
-	0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, 0x82, 0x88,
-	0x83, 0xE4, 0x73, 0x74, 0x02, 0x93, 0x68, 0x60,
-	0xEF, 0xA3, 0xA3, 0xA3, 0x80, 0xDF, 0x02, 0x45,
-	0x8C, 0x02, 0x42, 0xDD, 0xE4, 0x93, 0xA3, 0xF8,
-	0xE4, 0x93, 0xA3, 0x40, 0x03, 0xF6, 0x80, 0x01,
-	0xF2, 0x08, 0xDF, 0xF4, 0x80, 0x29, 0xE4, 0x93,
-	0xA3, 0xF8, 0x54, 0x07, 0x24, 0x0C, 0xC8, 0xC3,
-	0x33, 0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83,
-	0x40, 0x04, 0xF4, 0x56, 0x80, 0x01, 0x46, 0xF6,
-	0xDF, 0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08,
-	0x10, 0x20, 0x40, 0x80, 0x90, 0x45, 0xD1, 0xE4,
-	0x7E, 0x01, 0x93, 0x60, 0xBC, 0xA3, 0xFF, 0x54,
-	0x3F, 0x30, 0xE5, 0x09, 0x54, 0x1F, 0xFE, 0xE4,
-	0x93, 0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0,
-	0x25, 0xE0, 0x60, 0xA8, 0x40, 0xB8, 0xE4, 0x93,
-	0xA3, 0xFA, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93,
-	0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, 0xC5, 0x83,
-	0xCA, 0xF0, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA,
-	0xC5, 0x83, 0xCA, 0xDF, 0xE9, 0xDE, 0xE7, 0x80,
-	0xBE, 0x00, 0x41, 0x82, 0x09, 0x00, 0x41, 0x82,
-	0x0A, 0x00, 0x41, 0x82, 0x17, 0x00, 0x59, 0xE2,
-	0x5C, 0x24, 0x5E, 0x5D, 0x5F, 0xA1, 0xC0, 0xE0,
-	0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0,
-	0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01, 0xC0,
-	0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, 0xC0,
-	0x06, 0xC0, 0x07, 0x90, 0x01, 0xC4, 0x74, 0xE6,
-	0xF0, 0x74, 0x45, 0xA3, 0xF0, 0xD1, 0x35, 0x74,
-	0xE6, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x45,
-	0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05,
-	0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01,
-	0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83,
-	0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0x90, 0x00, 0x54,
-	0xE0, 0x55, 0x35, 0xF5, 0x39, 0xA3, 0xE0, 0x55,
-	0x36, 0xF5, 0x3A, 0xA3, 0xE0, 0x55, 0x37, 0xF5,
-	0x3B, 0xA3, 0xE0, 0x55, 0x38, 0xF5, 0x3C, 0xAD,
-	0x39, 0x7F, 0x54, 0x12, 0x32, 0x1E, 0xAD, 0x3A,
-	0x7F, 0x55, 0x12, 0x32, 0x1E, 0xAD, 0x3B, 0x7F,
-	0x56, 0x12, 0x32, 0x1E, 0xAD, 0x3C, 0x7F, 0x57,
-	0x12, 0x32, 0x1E, 0x53, 0x91, 0xEF, 0x22, 0xC0,
-	0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0,
-	0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01,
-	0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05,
-	0xC0, 0x06, 0xC0, 0x07, 0x90, 0x01, 0xC4, 0x74,
-	0x6F, 0xF0, 0x74, 0x46, 0xA3, 0xF0, 0x12, 0x6C,
-	0x78, 0xE5, 0x41, 0x30, 0xE4, 0x04, 0x7F, 0x02,
-	0x91, 0x27, 0xE5, 0x41, 0x30, 0xE6, 0x03, 0x12,
-	0x6C, 0xD5, 0xE5, 0x43, 0x30, 0xE0, 0x03, 0x12,
-	0x51, 0xC2, 0xE5, 0x43, 0x30, 0xE1, 0x03, 0x12,
-	0x4D, 0x0C, 0xE5, 0x43, 0x30, 0xE2, 0x03, 0x12,
-	0x4C, 0xC1, 0xE5, 0x43, 0x30, 0xE3, 0x03, 0x12,
-	0x6C, 0xE2, 0xE5, 0x43, 0x30, 0xE4, 0x03, 0x12,
-	0x6D, 0x04, 0xE5, 0x43, 0x30, 0xE5, 0x03, 0x12,
-	0x6D, 0x33, 0xE5, 0x43, 0x30, 0xE6, 0x02, 0xF1,
-	0x0F, 0xE5, 0x44, 0x30, 0xE1, 0x03, 0x12, 0x51,
-	0x7F, 0x74, 0x6F, 0x04, 0x90, 0x01, 0xC4, 0xF0,
-	0x74, 0x46, 0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06,
-	0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02,
-	0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82,
-	0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0x90,
-	0x80, 0xDE, 0xE0, 0xB4, 0x01, 0x13, 0x90, 0x81,
-	0x27, 0xE0, 0x60, 0x0D, 0x90, 0x81, 0x2B, 0xE0,
-	0x54, 0xFE, 0xF0, 0x54, 0x07, 0x70, 0x02, 0xF1,
-	0x2A, 0x22, 0x90, 0x81, 0x1F, 0xE0, 0x90, 0x81,
-	0x29, 0x30, 0xE0, 0x05, 0xE0, 0xFF, 0x02, 0x74,
-	0x8F, 0xE0, 0xFF, 0x7D, 0x01, 0xD3, 0x10, 0xAF,
-	0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x82, 0x13, 0xED,
-	0xF0, 0x90, 0x81, 0x2A, 0xE0, 0x90, 0x82, 0x14,
-	0xF0, 0x90, 0x81, 0x24, 0xE0, 0xFE, 0xC4, 0x13,
-	0x13, 0x54, 0x03, 0x30, 0xE0, 0x03, 0x02, 0x48,
-	0xA0, 0xEE, 0xC4, 0x13, 0x13, 0x13, 0x54, 0x01,
-	0x30, 0xE0, 0x03, 0x02, 0x48, 0xA0, 0x90, 0x82,
-	0x14, 0xE0, 0xFE, 0x6F, 0x70, 0x03, 0x02, 0x48,
-	0xA0, 0xEF, 0x70, 0x03, 0x02, 0x48, 0x17, 0x24,
-	0xFE, 0x70, 0x03, 0x02, 0x48, 0x50, 0x24, 0xFE,
-	0x60, 0x51, 0x24, 0xFC, 0x70, 0x03, 0x02, 0x48,
-	0x8B, 0x24, 0xFC, 0x60, 0x03, 0x02, 0x48, 0xA0,
-	0xEE, 0xB4, 0x0E, 0x03, 0x12, 0x49, 0x5E, 0x90,
-	0x82, 0x14, 0xE0, 0x70, 0x05, 0x7F, 0x01, 0x12,
-	0x49, 0x93, 0x90, 0x82, 0x14, 0xE0, 0xB4, 0x06,
-	0x03, 0x12, 0x49, 0x34, 0x90, 0x82, 0x14, 0xE0,
-	0xB4, 0x04, 0x0F, 0x90, 0x82, 0x13, 0xE0, 0xFF,
-	0x60, 0x05, 0x12, 0x73, 0x75, 0x80, 0x03, 0x12,
-	0x66, 0x26, 0x90, 0x82, 0x14, 0xE0, 0x64, 0x08,
-	0x60, 0x03, 0x02, 0x48, 0xA0, 0x12, 0x73, 0xD3,
-	0x02, 0x48, 0xA0, 0x90, 0x82, 0x14, 0xE0, 0x70,
-	0x05, 0x7F, 0x01, 0x12, 0x49, 0x93, 0x90, 0x82,
-	0x14, 0xE0, 0xB4, 0x06, 0x03, 0x12, 0x49, 0x34,
-	0x90, 0x82, 0x14, 0xE0, 0xB4, 0x0E, 0x09, 0x12,
-	0x48, 0xA5, 0xBF, 0x01, 0x03, 0x12, 0x49, 0x5E,
-	0x90, 0x82, 0x14, 0xE0, 0x64, 0x0C, 0x60, 0x02,
-	0x01, 0xA0, 0x11, 0xA5, 0xEF, 0x64, 0x01, 0x60,
-	0x02, 0x01, 0xA0, 0x11, 0xFA, 0x01, 0xA0, 0x90,
-	0x82, 0x14, 0xE0, 0xB4, 0x0E, 0x07, 0x11, 0xA5,
-	0xBF, 0x01, 0x02, 0x31, 0x5E, 0x90, 0x82, 0x14,
-	0xE0, 0xB4, 0x06, 0x02, 0x31, 0x34, 0x90, 0x82,
-	0x14, 0xE0, 0xB4, 0x0C, 0x07, 0x11, 0xA5, 0xBF,
-	0x01, 0x02, 0x11, 0xFA, 0x90, 0x82, 0x14, 0xE0,
-	0x64, 0x04, 0x70, 0x5C, 0x12, 0x72, 0xF5, 0xEF,
-	0x64, 0x01, 0x70, 0x54, 0x31, 0xBE, 0x80, 0x50,
-	0x90, 0x82, 0x14, 0xE0, 0xB4, 0x0E, 0x07, 0x11,
-	0xA5, 0xBF, 0x01, 0x02, 0x31, 0x5E, 0x90, 0x82,
-	0x14, 0xE0, 0xB4, 0x06, 0x02, 0x31, 0x34, 0x90,
-	0x82, 0x14, 0xE0, 0xB4, 0x0C, 0x07, 0x11, 0xA5,
-	0xBF, 0x01, 0x02, 0x11, 0xFA, 0x90, 0x82, 0x14,
-	0xE0, 0x70, 0x04, 0x7F, 0x01, 0x31, 0x93, 0x90,
-	0x82, 0x14, 0xE0, 0xB4, 0x04, 0x1A, 0x12, 0x73,
-	0xBB, 0x80, 0x15, 0x90, 0x82, 0x14, 0xE0, 0xB4,
-	0x0C, 0x0E, 0x90, 0x81, 0x25, 0xE0, 0xFF, 0x13,
-	0x13, 0x54, 0x3F, 0x30, 0xE0, 0x02, 0x31, 0xB1,
-	0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD1, 0xAB, 0xEF,
-	0x64, 0x01, 0x60, 0x08, 0x90, 0x01, 0xB8, 0x74,
-	0x01, 0xF0, 0x80, 0x3D, 0x90, 0x81, 0x24, 0xE0,
-	0xFF, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0,
-	0x08, 0x90, 0x01, 0xB8, 0x74, 0x02, 0xF0, 0x80,
-	0x28, 0xEF, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x08,
-	0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x80, 0x19,
-	0x90, 0x81, 0x29, 0xE0, 0xD3, 0x94, 0x04, 0x40,
-	0x08, 0x90, 0x01, 0xB8, 0x74, 0x08, 0xF0, 0x80,
-	0x08, 0x90, 0x01, 0xB8, 0xE4, 0xF0, 0x7F, 0x01,
-	0x22, 0x90, 0x01, 0xB9, 0x74, 0x02, 0xF0, 0x7F,
-	0x00, 0x22, 0x90, 0x80, 0xDE, 0xE0, 0x64, 0x01,
-	0x70, 0x31, 0x90, 0x81, 0x25, 0xE0, 0x54, 0xFD,
-	0xF0, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0, 0x7F,
-	0x01, 0xF1, 0x0D, 0xBF, 0x01, 0x12, 0x90, 0x81,
-	0x24, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x81, 0x2A,
-	0x74, 0x0E, 0xF0, 0x90, 0x81, 0x23, 0xF0, 0x22,
-	0x90, 0x01, 0xB9, 0x74, 0x01, 0xF0, 0x90, 0x01,
-	0xB8, 0x04, 0xF0, 0x22, 0x90, 0x81, 0x25, 0xE0,
-	0x90, 0x06, 0x04, 0x20, 0xE0, 0x0C, 0xE0, 0x44,
-	0x40, 0xF0, 0x90, 0x81, 0x2A, 0x74, 0x04, 0xF0,
-	0x80, 0x0E, 0xE0, 0x54, 0x7F, 0xF0, 0x90, 0x81,
-	0x2A, 0x74, 0x0C, 0xF0, 0x90, 0x81, 0x23, 0xF0,
-	0x90, 0x05, 0x22, 0xE4, 0xF0, 0x22, 0x90, 0x81,
-	0x25, 0xE0, 0xC3, 0x13, 0x20, 0xE0, 0x08, 0x90,
-	0x81, 0x2A, 0x74, 0x0C, 0xF0, 0x80, 0x1E, 0x90,
-	0x06, 0x04, 0xE0, 0x44, 0x40, 0xF0, 0xE0, 0x44,
-	0x80, 0xF0, 0x90, 0x81, 0x2A, 0x74, 0x04, 0xF0,
-	0x90, 0x05, 0x27, 0xE0, 0x44, 0x80, 0xF0, 0x90,
-	0x81, 0x23, 0x74, 0x04, 0xF0, 0x90, 0x05, 0x22,
-	0xE4, 0xF0, 0x22, 0x90, 0x82, 0x15, 0xEF, 0xF0,
-	0x12, 0x54, 0x65, 0x90, 0x82, 0x15, 0xE0, 0x60,
-	0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x81,
-	0x2A, 0x74, 0x04, 0xF0, 0x90, 0x81, 0x23, 0xF0,
-	0x22, 0x31, 0xE3, 0x90, 0x81, 0x2A, 0x74, 0x08,
-	0xF0, 0x90, 0x81, 0x23, 0xF0, 0x22, 0x90, 0x05,
-	0x22, 0x74, 0xFF, 0xF0, 0xF1, 0x3A, 0x90, 0x01,
-	0x37, 0x74, 0x02, 0xF0, 0xFD, 0x7F, 0x03, 0x51,
-	0x57, 0x31, 0xE3, 0xE4, 0x90, 0x81, 0x2A, 0xF0,
-	0x90, 0x81, 0x23, 0xF0, 0x22, 0x90, 0x05, 0x22,
-	0x74, 0xFF, 0xF0, 0xF1, 0x3A, 0x90, 0x85, 0xBB,
-	0x12, 0x20, 0xDA, 0xCC, 0xF0, 0x00, 0xC0, 0x7F,
-	0x8C, 0x7E, 0x08, 0x12, 0x2E, 0xA2, 0x90, 0x85,
-	0xBB, 0x12, 0x20, 0xDA, 0x00, 0x00, 0x00, 0x14,
-	0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2E, 0xA2, 0x90,
-	0x81, 0xF9, 0x12, 0x20, 0xDA, 0x00, 0x00, 0x00,
-	0x00, 0xE4, 0xFD, 0xFF, 0x12, 0x55, 0x1C, 0x7F,
-	0x7C, 0x7E, 0x08, 0x12, 0x2D, 0x5C, 0xEC, 0x44,
-	0x80, 0xFC, 0x90, 0x82, 0x05, 0x12, 0x20, 0xCE,
-	0x90, 0x82, 0x05, 0x12, 0x44, 0xD9, 0x90, 0x85,
-	0xBB, 0x12, 0x20, 0xCE, 0x7F, 0x7C, 0x7E, 0x08,
-	0x12, 0x2E, 0xA2, 0x90, 0x01, 0x00, 0x74, 0x3F,
-	0xF0, 0xA3, 0xE0, 0x54, 0xFD, 0xF0, 0x90, 0x05,
-	0x53, 0xE0, 0x44, 0x20, 0xF0, 0x22, 0x90, 0x01,
-	0x34, 0x74, 0x40, 0xF0, 0xFD, 0xE4, 0xFF, 0x74,
-	0x3D, 0x2F, 0xF8, 0xE6, 0x4D, 0xFE, 0xF6, 0x74,
-	0x30, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x01, 0xF5,
-	0x83, 0xEE, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01,
-	0xC3, 0xC0, 0xD0, 0xE4, 0x90, 0x81, 0xCB, 0xF0,
-	0x12, 0x1F, 0xA4, 0xFF, 0x54, 0x01, 0xFE, 0x90,
-	0x81, 0x1F, 0xE0, 0x54, 0xFE, 0x4E, 0xFE, 0xF0,
-	0xEF, 0x54, 0x02, 0xFF, 0xEE, 0x54, 0xFD, 0x4F,
-	0xFF, 0xF0, 0x12, 0x1F, 0xA4, 0xFE, 0x54, 0x04,
-	0xFD, 0xEF, 0x54, 0xFB, 0x4D, 0xFF, 0x90, 0x81,
-	0x1F, 0xF0, 0xEE, 0x54, 0x08, 0xFE, 0xEF, 0x54,
-	0xF7, 0x4E, 0xFF, 0xF0, 0x12, 0x1F, 0xA4, 0xFE,
-	0x54, 0x10, 0xFD, 0xEF, 0x54, 0xEF, 0x4D, 0xFF,
-	0x90, 0x81, 0x1F, 0xF0, 0xEE, 0x54, 0x20, 0xFE,
-	0xEF, 0x54, 0xDF, 0x4E, 0xF0, 0x12, 0x1F, 0xA4,
-	0xC3, 0x13, 0x20, 0xE0, 0x02, 0x61, 0x5E, 0x90,
-	0x81, 0x1F, 0xE0, 0xFF, 0x30, 0xE0, 0x6D, 0x90,
-	0x81, 0xCB, 0x74, 0x21, 0xF0, 0xEF, 0x13, 0x13,
-	0x54, 0x3F, 0x30, 0xE0, 0x0B, 0x51, 0x4E, 0x90,
-	0x81, 0xCB, 0xE0, 0x44, 0x08, 0xF0, 0x80, 0x0C,
-	0xE4, 0x90, 0x81, 0x20, 0xF0, 0xA3, 0xF0, 0x7D,
-	0x40, 0xFF, 0x91, 0x26, 0x90, 0x81, 0x1F, 0xE0,
-	0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0,
-	0x07, 0x90, 0x81, 0xCB, 0xE0, 0x44, 0x12, 0xF0,
-	0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x07, 0x90,
-	0x81, 0xCB, 0xE0, 0x44, 0x14, 0xF0, 0x90, 0x81,
-	0x1F, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0x30, 0xE0,
-	0x07, 0x90, 0x81, 0xCB, 0xE0, 0x44, 0x80, 0xF0,
-	0x90, 0x81, 0xCB, 0xE0, 0x90, 0x05, 0x27, 0xF0,
-	0x90, 0x81, 0x22, 0xE0, 0x60, 0x02, 0x81, 0x17,
-	0x7F, 0x01, 0x80, 0x15, 0x90, 0x81, 0xCB, 0x74,
-	0x01, 0xF0, 0x90, 0x05, 0x27, 0xF0, 0x90, 0x81,
-	0x22, 0xE0, 0x64, 0x04, 0x60, 0x02, 0x81, 0x17,
-	0xFF, 0x12, 0x53, 0x0E, 0x81, 0x17, 0x90, 0x81,
-	0x1F, 0xE0, 0xFF, 0x20, 0xE0, 0x02, 0x61, 0xE7,
-	0x90, 0x81, 0xCB, 0x74, 0x31, 0xF0, 0xEF, 0x13,
-	0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0B, 0x51, 0x4E,
-	0x90, 0x81, 0xCB, 0xE0, 0x44, 0x08, 0xF0, 0x80,
-	0x06, 0x7D, 0x40, 0xE4, 0xFF, 0x91, 0x26, 0x90,
-	0x81, 0x1F, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54,
-	0x1F, 0x30, 0xE0, 0x07, 0x90, 0x81, 0xCB, 0xE0,
-	0x44, 0x02, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30,
-	0xE0, 0x07, 0x90, 0x81, 0xCB, 0xE0, 0x44, 0x04,
-	0xF0, 0x90, 0x81, 0xCB, 0xE0, 0x90, 0x05, 0x27,
-	0xF0, 0x90, 0x81, 0x23, 0xE0, 0x64, 0x02, 0x70,
-	0x1D, 0xFD, 0x7F, 0x04, 0x12, 0x47, 0x3D, 0x12,
-	0x51, 0x73, 0xBF, 0x01, 0x09, 0x90, 0x81, 0x29,
-	0xE0, 0xFF, 0x7D, 0x01, 0x80, 0x03, 0xE4, 0xFD,
-	0xFF, 0x12, 0x47, 0x3D, 0x80, 0x41, 0x90, 0x81,
-	0x2A, 0xE0, 0x90, 0x81, 0x23, 0xF0, 0x90, 0x05,
-	0x27, 0xE0, 0x44, 0x40, 0xF0, 0x80, 0x30, 0x90,
-	0x81, 0xCB, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27,
-	0xF0, 0x90, 0x81, 0x23, 0xE0, 0xB4, 0x02, 0x06,
-	0x7D, 0x01, 0x7F, 0x04, 0x80, 0x0B, 0x90, 0x81,
-	0x23, 0xE0, 0xB4, 0x08, 0x07, 0x7D, 0x01, 0x7F,
-	0x0C, 0x12, 0x47, 0x3D, 0xD1, 0x34, 0x90, 0x81,
-	0x29, 0x12, 0x47, 0x39, 0x12, 0x5A, 0xA7, 0xD0,
-	0xD0, 0x92, 0xAF, 0x22, 0x7D, 0x02, 0x7F, 0x02,
-	0x91, 0x26, 0x7D, 0x01, 0x7F, 0x02, 0x74, 0x3D,
-	0x2F, 0xF8, 0xE6, 0xFE, 0xED, 0xF4, 0x5E, 0xFE,
-	0xF6, 0x74, 0x30, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
-	0x01, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xEF, 0x70,
-	0x37, 0x7D, 0x78, 0x7F, 0x02, 0x91, 0x26, 0x7D,
-	0x02, 0x7F, 0x03, 0x91, 0x26, 0x7D, 0xC8, 0x7F,
-	0x02, 0x12, 0x71, 0x8F, 0x90, 0x01, 0x57, 0xE4,
-	0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x7D,
-	0x01, 0x7F, 0x0C, 0x12, 0x47, 0x3D, 0x90, 0x81,
-	0x24, 0xE0, 0x54, 0xF7, 0xF0, 0x54, 0xEF, 0xF0,
-	0x90, 0x06, 0x0A, 0xE0, 0x54, 0xF8, 0xF0, 0x22,
-	0x90, 0x01, 0x36, 0x74, 0x78, 0xF0, 0xA3, 0x74,
-	0x02, 0xF0, 0x7D, 0x78, 0xFF, 0x51, 0x57, 0x7D,
-	0x02, 0x7F, 0x03, 0x51, 0x57, 0x90, 0x06, 0x0A,
-	0xE0, 0x44, 0x07, 0xF0, 0x90, 0x81, 0x32, 0xA3,
-	0xE0, 0x90, 0x05, 0x58, 0xF0, 0x90, 0x80, 0xDE,
-	0xE0, 0xB4, 0x01, 0x15, 0x90, 0x81, 0x25, 0xE0,
-	0x54, 0xFB, 0xF0, 0x90, 0x81, 0x2A, 0xE0, 0x20,
-	0xE2, 0x0E, 0x7D, 0x01, 0x7F, 0x04, 0x02, 0x47,
-	0x3D, 0x90, 0x81, 0x25, 0xE0, 0x44, 0x04, 0xF0,
-	0x22, 0x90, 0x81, 0x1F, 0xE0, 0xFF, 0x30, 0xE0,
-	0x08, 0x90, 0x81, 0x23, 0xE0, 0x64, 0x02, 0x60,
-	0x3A, 0x90, 0x81, 0x27, 0xE0, 0x70, 0x04, 0xEF,
-	0x30, 0xE0, 0x0A, 0x90, 0x81, 0x2A, 0xE0, 0x64,
-	0x02, 0x60, 0x28, 0xB1, 0x83, 0x90, 0x81, 0x25,
-	0xE0, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0,
-	0x14, 0x90, 0x81, 0x2D, 0xE0, 0xFF, 0xA3, 0xE0,
-	0x6F, 0x70, 0x0A, 0xF1, 0xCD, 0x91, 0x1C, 0x90,
-	0x81, 0x2E, 0xE0, 0x14, 0xF0, 0x90, 0x01, 0xE6,
-	0xE0, 0x04, 0xF0, 0x22, 0x90, 0x81, 0x1F, 0xE0,
-	0x30, 0xE0, 0x06, 0x90, 0x81, 0x21, 0x74, 0x01,
-	0xF0, 0x90, 0x81, 0x27, 0xE0, 0x60, 0x45, 0x90,
-	0x81, 0x25, 0xE0, 0xFF, 0x13, 0x13, 0x13, 0x54,
-	0x1F, 0x30, 0xE0, 0x12, 0x90, 0x01, 0x3B, 0xE0,
-	0x30, 0xE4, 0x0B, 0x91, 0x1C, 0x90, 0x81, 0x2D,
-	0xE0, 0x14, 0x90, 0x05, 0x73, 0xF0, 0x90, 0x82,
-	0x0B, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x44, 0xA9,
-	0xC3, 0x90, 0x82, 0x0C, 0xE0, 0x94, 0x80, 0x90,
-	0x82, 0x0B, 0xE0, 0x64, 0x80, 0x94, 0x80, 0x40,
-	0x0B, 0x90, 0x01, 0x98, 0xE0, 0x54, 0xFE, 0xF0,
-	0xE0, 0x44, 0x01, 0xF0, 0x12, 0x75, 0xF8, 0xD1,
-	0xD6, 0x90, 0x81, 0x3F, 0xE0, 0x30, 0xE0, 0x0C,
-	0xE4, 0xF5, 0x1D, 0xA3, 0xF1, 0xFB, 0x90, 0x01,
-	0x57, 0x74, 0x05, 0xF0, 0x90, 0x01, 0xBE, 0xE0,
-	0x04, 0xF0, 0x22, 0x90, 0x80, 0xDE, 0xE0, 0x64,
-	0x01, 0x60, 0x02, 0xC1, 0x23, 0x90, 0x81, 0x27,
-	0xE0, 0x70, 0x02, 0xC1, 0x23, 0x90, 0x81, 0x26,
-	0xE0, 0xC4, 0x54, 0x0F, 0x64, 0x01, 0x70, 0x22,
-	0x90, 0x06, 0xAB, 0xE0, 0x90, 0x81, 0x2E, 0xF0,
-	0x90, 0x06, 0xAA, 0xE0, 0x90, 0x81, 0x2D, 0xF0,
-	0xA3, 0xE0, 0xFF, 0x70, 0x08, 0x90, 0x81, 0x2D,
-	0xE0, 0xFE, 0xFF, 0x80, 0x00, 0x90, 0x81, 0x2E,
-	0xEF, 0xF0, 0x90, 0x81, 0x25, 0xE0, 0x44, 0x04,
-	0xF0, 0xE4, 0x90, 0x81, 0x30, 0xF0, 0x90, 0x81,
-	0x32, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x90,
-	0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74,
-	0x02, 0xF0, 0x90, 0x81, 0x2B, 0xE0, 0x54, 0xFD,
-	0xF0, 0x54, 0xEF, 0xF0, 0x90, 0x81, 0x26, 0xE0,
-	0xFF, 0xC4, 0x54, 0x0F, 0x24, 0xFD, 0x50, 0x02,
-	0x80, 0x0F, 0x90, 0x81, 0x1F, 0xE0, 0x30, 0xE0,
-	0x05, 0x12, 0x6D, 0xF2, 0x80, 0x03, 0x12, 0x6E,
-	0xC9, 0x90, 0x81, 0x25, 0xE0, 0x13, 0x13, 0x13,
-	0x54, 0x1F, 0x30, 0xE0, 0x0E, 0x90, 0x81, 0x2D,
-	0xE0, 0xFF, 0xA3, 0xE0, 0xB5, 0x07, 0x04, 0xF1,
-	0xCD, 0x91, 0x22, 0x90, 0x81, 0x1F, 0xE0, 0xC3,
-	0x13, 0x20, 0xE0, 0x07, 0x90, 0x81, 0x25, 0xE0,
-	0x44, 0x04, 0xF0, 0x22, 0xD1, 0xAB, 0xEF, 0x70,
-	0x02, 0xD1, 0x3C, 0x22, 0x90, 0x81, 0x27, 0xE0,
-	0x64, 0x01, 0x70, 0x66, 0x90, 0x81, 0x26, 0xE0,
-	0x54, 0x0F, 0x60, 0x51, 0x90, 0x81, 0x2A, 0xE0,
-	0x70, 0x03, 0xFF, 0x31, 0x93, 0x90, 0x81, 0x2A,
-	0xE0, 0x64, 0x0C, 0x60, 0x03, 0x12, 0x66, 0x26,
-	0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C,
-	0x74, 0x04, 0xF0, 0xD1, 0xAB, 0xEF, 0x64, 0x01,
-	0x60, 0x38, 0xE4, 0xF5, 0x1D, 0x90, 0x81, 0x3A,
-	0xE0, 0xC3, 0x13, 0x54, 0x7F, 0xF5, 0x1E, 0xE4,
-	0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0x12, 0x50,
-	0x05, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90,
-	0x06, 0x92, 0x74, 0x01, 0xF0, 0x90, 0x81, 0x24,
-	0xE0, 0x44, 0x08, 0xF0, 0x22, 0x90, 0x81, 0x2A,
-	0xE0, 0x70, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12,
-	0x47, 0x3D, 0x22, 0x90, 0x04, 0x1A, 0xE0, 0xF4,
-	0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x04, 0x1B,
-	0xE0, 0x54, 0x07, 0x64, 0x07, 0x7F, 0x01, 0x60,
-	0x02, 0x7F, 0x00, 0x22, 0x12, 0x50, 0x60, 0x90,
-	0x81, 0x2D, 0xE0, 0x14, 0x90, 0x05, 0x73, 0xF0,
-	0x7D, 0x02, 0x7F, 0x02, 0x51, 0x57, 0x90, 0x81,
-	0x42, 0xE0, 0x30, 0xE0, 0x2D, 0x90, 0x80, 0xDE,
-	0xE0, 0xB4, 0x01, 0x26, 0x90, 0x82, 0x17, 0xE0,
-	0x04, 0xF0, 0xE0, 0xB4, 0x0A, 0x0B, 0x90, 0x81,
-	0x44, 0xE0, 0x04, 0xF0, 0xE4, 0x90, 0x82, 0x17,
-	0xF0, 0x90, 0x81, 0x44, 0xE0, 0xFF, 0x90, 0x81,
-	0x43, 0xE0, 0xB5, 0x07, 0x05, 0xE4, 0xA3, 0xF0,
-	0xF1, 0x0B, 0x22, 0xE4, 0xFF, 0x8F, 0x53, 0x90,
-	0x04, 0x1D, 0xE0, 0x60, 0x19, 0x90, 0x05, 0x22,
-	0xE0, 0xF5, 0x56, 0x74, 0xFF, 0xF0, 0xF1, 0x3A,
-	0xBF, 0x01, 0x03, 0x12, 0x74, 0xFB, 0x90, 0x05,
-	0x22, 0xE5, 0x56, 0xF0, 0x80, 0x03, 0x12, 0x74,
-	0xFB, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0, 0x7F,
-	0x01, 0x22, 0xE4, 0x90, 0x82, 0x0F, 0xF0, 0xA3,
-	0xF0, 0x90, 0x05, 0xF8, 0xE0, 0x70, 0x0F, 0xA3,
-	0xE0, 0x70, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xA3,
-	0xE0, 0x70, 0x03, 0x7F, 0x01, 0x22, 0xD3, 0x90,
-	0x82, 0x10, 0xE0, 0x94, 0xE8, 0x90, 0x82, 0x0F,
-	0xE0, 0x94, 0x03, 0x40, 0x0A, 0x90, 0x01, 0xC0,
-	0xE0, 0x44, 0x20, 0xF0, 0x7F, 0x00, 0x22, 0x7F,
-	0x32, 0x7E, 0x00, 0x12, 0x32, 0xAA, 0x90, 0x82,
-	0x0F, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x44, 0xA9,
-	0x80, 0xBF, 0x74, 0x1F, 0x2D, 0xF5, 0x82, 0xE4,
-	0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0x3F, 0xF0,
-	0xEF, 0x60, 0x1D, 0x74, 0x21, 0x2D, 0xF5, 0x82,
-	0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x10,
-	0xF0, 0x74, 0x1F, 0x2D, 0xF5, 0x82, 0xE4, 0x34,
-	0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x22,
-	0x74, 0x21, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC,
-	0xF5, 0x83, 0xE0, 0x54, 0xEF, 0xF0, 0x74, 0x1F,
-	0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83,
-	0xE0, 0x44, 0x40, 0xF0, 0x22, 0xEF, 0x14, 0x90,
-	0x05, 0x73, 0xF0, 0x90, 0x01, 0x3F, 0x74, 0x10,
-	0xF0, 0xFD, 0x7F, 0x03, 0x74, 0x45, 0x2F, 0xF8,
-	0xE6, 0x4D, 0xFE, 0xF6, 0x74, 0x38, 0x2F, 0xF5,
-	0x82, 0xE4, 0x34, 0x01, 0xF5, 0x83, 0xEE, 0xF0,
-	0x22, 0xE0, 0x44, 0x02, 0xF0, 0xE4, 0xF5, 0x1D,
-	0x90, 0x81, 0x39, 0xE0, 0xF5, 0x1E, 0xE4, 0xFB,
-	0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x8E, 0x19, 0x8F,
-	0x1A, 0xE5, 0x1E, 0x54, 0x07, 0xC4, 0x33, 0x54,
-	0xE0, 0x85, 0x19, 0x83, 0x85, 0x1A, 0x82, 0xF0,
-	0xE5, 0x1D, 0x54, 0x07, 0xC4, 0x33, 0x54, 0xE0,
-	0xFF, 0xE5, 0x1E, 0x13, 0x13, 0x13, 0x54, 0x1F,
-	0x4F, 0xA3, 0xF0, 0xEB, 0x54, 0x07, 0xC4, 0x33,
-	0x54, 0xE0, 0xFF, 0xE5, 0x1D, 0x13, 0x13, 0x13,
-	0x54, 0x1F, 0x4F, 0x85, 0x1A, 0x82, 0x85, 0x19,
-	0x83, 0xA3, 0xA3, 0xF0, 0xBD, 0x01, 0x0C, 0x85,
-	0x1A, 0x82, 0x8E, 0x83, 0xA3, 0xA3, 0xA3, 0x74,
-	0x03, 0xF0, 0x22, 0x85, 0x1A, 0x82, 0x85, 0x19,
-	0x83, 0xA3, 0xA3, 0xA3, 0x74, 0x01, 0xF0, 0x22,
-	0xE4, 0x90, 0x81, 0x4D, 0xF0, 0x90, 0x81, 0x27,
-	0xE0, 0x60, 0x58, 0x90, 0x80, 0xDE, 0xE0, 0x64,
-	0x01, 0x70, 0x50, 0x90, 0x81, 0x4D, 0x04, 0xF0,
-	0xE4, 0x90, 0x81, 0x2E, 0xF0, 0x90, 0x81, 0x1F,
-	0xE0, 0x30, 0xE0, 0x15, 0x90, 0x81, 0x23, 0xE0,
-	0xB4, 0x02, 0x05, 0xE4, 0x90, 0x81, 0x4D, 0xF0,
-	0x31, 0x73, 0xEF, 0x70, 0x04, 0x90, 0x81, 0x4D,
-	0xF0, 0x90, 0x81, 0x4D, 0xE0, 0x60, 0x24, 0x90,
-	0x81, 0x2B, 0xE0, 0x44, 0x10, 0xF0, 0xE4, 0xF5,
-	0x1D, 0x90, 0x81, 0x2F, 0x12, 0x4F, 0xFB, 0x90,
-	0x01, 0x57, 0x74, 0x05, 0xF0, 0x90, 0x81, 0x2A,
-	0xE0, 0x20, 0xE2, 0x07, 0x7D, 0x01, 0x7F, 0x04,
-	0x12, 0x47, 0x3D, 0x22, 0xE4, 0x90, 0x81, 0x4C,
-	0xF0, 0x90, 0x81, 0x27, 0xE0, 0x70, 0x02, 0x21,
-	0x72, 0x90, 0x80, 0xDE, 0xE0, 0x64, 0x01, 0x60,
-	0x02, 0x21, 0x72, 0x90, 0x81, 0x26, 0xE0, 0xFF,
-	0xC4, 0x54, 0x0F, 0x60, 0x22, 0x24, 0xFE, 0x60,
-	0x03, 0x04, 0x70, 0x21, 0x90, 0x81, 0x2E, 0xE0,
-	0x14, 0xF0, 0xE0, 0xFF, 0x60, 0x06, 0x90, 0x81,
-	0x30, 0xE0, 0x60, 0x11, 0xEF, 0x70, 0x08, 0x90,
-	0x81, 0x2D, 0xE0, 0xA3, 0xF0, 0x80, 0x00, 0x90,
-	0x81, 0x4C, 0x74, 0x01, 0xF0, 0x90, 0x81, 0x1F,
-	0xE0, 0x30, 0xE0, 0x15, 0x90, 0x81, 0x23, 0xE0,
-	0xB4, 0x02, 0x05, 0xE4, 0x90, 0x81, 0x4C, 0xF0,
-	0x31, 0x73, 0xEF, 0x70, 0x04, 0x90, 0x81, 0x4C,
-	0xF0, 0x90, 0x81, 0x4C, 0xE0, 0x60, 0x43, 0x90,
-	0x81, 0x2B, 0xE0, 0x44, 0x10, 0xF0, 0x90, 0x81,
-	0x30, 0xE0, 0x60, 0x03, 0xB4, 0x01, 0x09, 0xE4,
-	0xF5, 0x1D, 0x90, 0x81, 0x30, 0xE0, 0x80, 0x0D,
-	0xE4, 0xF5, 0x1D, 0x90, 0x81, 0x30, 0xE0, 0x75,
-	0xF0, 0x03, 0xA4, 0x24, 0xFE, 0xFF, 0x90, 0x81,
-	0x2F, 0xE0, 0x2F, 0x12, 0x4F, 0xFC, 0x90, 0x01,
-	0x57, 0x74, 0x05, 0xF0, 0x90, 0x81, 0x2A, 0xE0,
-	0x20, 0xE2, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12,
-	0x47, 0x3D, 0x22, 0x90, 0x05, 0x43, 0xE0, 0x7F,
-	0x00, 0x30, 0xE7, 0x02, 0x7F, 0x01, 0x22, 0x90,
-	0x81, 0x27, 0xE0, 0x70, 0x07, 0x90, 0x81, 0x1F,
-	0xE0, 0x30, 0xE0, 0x11, 0x90, 0x81, 0x1F, 0xE0,
-	0x30, 0xE0, 0x07, 0x31, 0x73, 0xBF, 0x01, 0x05,
-	0x41, 0x5B, 0x12, 0x4E, 0x3C, 0x22, 0xD3, 0x10,
-	0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x81, 0x1E,
-	0xE0, 0xB4, 0x01, 0x04, 0x7F, 0x04, 0x80, 0x0B,
-	0x31, 0x73, 0xBF, 0x01, 0x04, 0x7F, 0x01, 0x80,
-	0x02, 0x7F, 0x02, 0x71, 0x0E, 0xD0, 0xD0, 0x92,
-	0xAF, 0x22, 0x90, 0x81, 0x4B, 0xE0, 0x60, 0x0F,
-	0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x02,
-	0xF0, 0x90, 0x05, 0xFC, 0xE0, 0x04, 0xF0, 0x90,
-	0x81, 0x1F, 0xE0, 0x30, 0xE0, 0x10, 0xA3, 0x74,
-	0x01, 0xF0, 0x90, 0x81, 0x1F, 0xE0, 0xFF, 0xC3,
-	0x13, 0x30, 0xE0, 0x02, 0x31, 0x9E, 0x11, 0xC4,
-	0x90, 0x81, 0x3F, 0xE0, 0x30, 0xE0, 0x07, 0x91,
-	0x65, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x22, 0x90,
-	0x81, 0x1F, 0xE0, 0xFF, 0x30, 0xE0, 0x3D, 0x90,
-	0x81, 0x23, 0xE0, 0x7E, 0x00, 0xB4, 0x02, 0x02,
-	0x7E, 0x01, 0x90, 0x81, 0x22, 0xE0, 0x7D, 0x00,
-	0xB4, 0x04, 0x02, 0x7D, 0x01, 0xED, 0x4E, 0x70,
-	0x23, 0xEF, 0xC3, 0x13, 0x30, 0xE0, 0x02, 0x21,
-	0x9E, 0x51, 0x45, 0x90, 0x81, 0x23, 0xE0, 0xB4,
-	0x08, 0x06, 0xE4, 0xFD, 0x7F, 0x0C, 0x80, 0x09,
-	0x90, 0x81, 0x23, 0xE0, 0x70, 0x06, 0xFD, 0x7F,
-	0x04, 0x12, 0x47, 0x3D, 0x22, 0x90, 0x81, 0x1E,
-	0xE0, 0xB4, 0x01, 0x0F, 0x90, 0x81, 0x23, 0xE0,
-	0x64, 0x02, 0x60, 0x07, 0x7D, 0x01, 0x7F, 0x02,
-	0x12, 0x47, 0x3D, 0x90, 0x81, 0x27, 0xE0, 0x64,
-	0x02, 0x60, 0x14, 0x90, 0x81, 0x26, 0xE0, 0x54,
-	0x0F, 0x60, 0x0C, 0x12, 0x4E, 0xAB, 0xEF, 0x70,
-	0x06, 0xFD, 0x7F, 0x0C, 0x12, 0x47, 0x3D, 0x22,
-	0x90, 0x81, 0x1F, 0xE0, 0xFF, 0x30, 0xE0, 0x3F,
-	0x90, 0x81, 0x23, 0xE0, 0x7E, 0x00, 0xB4, 0x02,
-	0x02, 0x7E, 0x01, 0x90, 0x81, 0x22, 0xE0, 0x7D,
-	0x00, 0xB4, 0x04, 0x02, 0x7D, 0x01, 0xED, 0x4E,
-	0x70, 0x25, 0xEF, 0xC3, 0x13, 0x30, 0xE0, 0x02,
-	0x21, 0x9E, 0x12, 0x74, 0xAC, 0x90, 0x81, 0x23,
-	0xE0, 0xB4, 0x0C, 0x06, 0xE4, 0xFD, 0x7F, 0x08,
-	0x80, 0x0A, 0x90, 0x81, 0x23, 0xE0, 0xB4, 0x04,
-	0x06, 0xE4, 0xFD, 0xFF, 0x12, 0x47, 0x3D, 0x22,
-	0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90,
-	0x81, 0xCB, 0x12, 0x45, 0x1F, 0x12, 0x1F, 0xA4,
-	0xFF, 0x90, 0x81, 0x1E, 0xF0, 0xBF, 0x01, 0x12,
-	0x90, 0x81, 0xCB, 0x12, 0x45, 0x16, 0x90, 0x00,
-	0x01, 0x12, 0x1F, 0xBD, 0x64, 0x01, 0x60, 0x21,
-	0x80, 0x1D, 0x90, 0x81, 0xCB, 0x12, 0x45, 0x16,
-	0x90, 0x00, 0x01, 0x12, 0x1F, 0xBD, 0x64, 0x01,
-	0x60, 0x0F, 0x90, 0x81, 0x1F, 0xE0, 0x20, 0xE0,
-	0x06, 0xE4, 0xFF, 0x71, 0x0E, 0x80, 0x02, 0x31,
-	0x9E, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
-	0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x81, 0x22,
-	0xE0, 0x90, 0x82, 0x16, 0xF0, 0x6F, 0x70, 0x02,
-	0x81, 0x04, 0xEF, 0x14, 0x60, 0x3E, 0x14, 0x60,
-	0x62, 0x14, 0x70, 0x02, 0x61, 0xB8, 0x14, 0x70,
-	0x02, 0x61, 0xDF, 0x24, 0x04, 0x60, 0x02, 0x81,
-	0x04, 0x90, 0x82, 0x16, 0xE0, 0xFF, 0xB4, 0x04,
-	0x04, 0x91, 0x41, 0x81, 0x04, 0xEF, 0xB4, 0x02,
-	0x04, 0x91, 0x50, 0x81, 0x04, 0x90, 0x82, 0x16,
-	0xE0, 0xFF, 0xB4, 0x03, 0x04, 0x91, 0x54, 0x81,
-	0x04, 0xEF, 0x64, 0x01, 0x60, 0x02, 0x81, 0x04,
-	0x91, 0x43, 0x81, 0x04, 0x90, 0x82, 0x16, 0xE0,
-	0xFF, 0xB4, 0x04, 0x04, 0x91, 0xF3, 0x81, 0x04,
-	0xEF, 0xB4, 0x02, 0x04, 0x91, 0x58, 0x81, 0x04,
-	0x90, 0x82, 0x16, 0xE0, 0xFF, 0xB4, 0x03, 0x04,
-	0x91, 0xE8, 0x81, 0x04, 0xEF, 0x70, 0x7D, 0x91,
-	0x2B, 0x80, 0x79, 0x90, 0x82, 0x16, 0xE0, 0xB4,
-	0x04, 0x05, 0x12, 0x74, 0x60, 0x80, 0x6D, 0x90,
-	0x82, 0x16, 0xE0, 0xB4, 0x01, 0x04, 0x91, 0x21,
-	0x80, 0x62, 0x90, 0x82, 0x16, 0xE0, 0xB4, 0x03,
-	0x05, 0x12, 0x74, 0x71, 0x80, 0x56, 0x90, 0x82,
-	0x16, 0xE0, 0x70, 0x50, 0x91, 0x1F, 0x80, 0x4C,
-	0x90, 0x82, 0x16, 0xE0, 0xFF, 0xB4, 0x04, 0x05,
-	0x12, 0x74, 0x4C, 0x80, 0x3F, 0xEF, 0xB4, 0x01,
-	0x04, 0x91, 0x34, 0x80, 0x37, 0xEF, 0xB4, 0x02,
-	0x04, 0x91, 0xDF, 0x80, 0x2F, 0x90, 0x82, 0x16,
-	0xE0, 0x70, 0x29, 0x91, 0x32, 0x80, 0x25, 0x90,
-	0x82, 0x16, 0xE0, 0xFF, 0xB4, 0x03, 0x05, 0x12,
-	0x74, 0x7B, 0x80, 0x18, 0xEF, 0xB4, 0x01, 0x04,
-	0x91, 0x0B, 0x80, 0x10, 0xEF, 0xB4, 0x02, 0x04,
-	0xB1, 0x06, 0x80, 0x08, 0x90, 0x82, 0x16, 0xE0,
-	0x70, 0x02, 0x91, 0x09, 0xD0, 0xD0, 0x92, 0xAF,
-	0x22, 0x91, 0x2B, 0x90, 0x05, 0x22, 0x74, 0x6F,
-	0xF0, 0x90, 0x05, 0x27, 0xE0, 0x54, 0xBF, 0xF0,
-	0x90, 0x81, 0x22, 0x74, 0x04, 0xF0, 0x22, 0x91,
-	0x2B, 0x12, 0x49, 0xDD, 0x90, 0x81, 0x22, 0x74,
-	0x02, 0xF0, 0x22, 0x90, 0x81, 0x22, 0x74, 0x01,
-	0xF0, 0x22, 0x91, 0x2B, 0x90, 0x05, 0x22, 0x74,
-	0xFF, 0xF0, 0x90, 0x81, 0x22, 0x74, 0x03, 0xF0,
-	0x22, 0x91, 0xF3, 0x90, 0x05, 0x27, 0xE0, 0x54,
-	0xBF, 0xF0, 0xE4, 0x90, 0x81, 0x22, 0xF0, 0x22,
-	0x91, 0x58, 0x80, 0xEF, 0x91, 0xE8, 0x80, 0xEB,
-	0x91, 0x65, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90,
-	0x81, 0x22, 0x04, 0xF0, 0x22, 0xD3, 0x10, 0xAF,
-	0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x01, 0x01, 0xE0,
-	0x44, 0x02, 0xF0, 0x90, 0x01, 0x00, 0x74, 0xFF,
-	0xF0, 0x90, 0x06, 0xB7, 0x74, 0x09, 0xF0, 0x90,
-	0x06, 0xB4, 0x74, 0x86, 0xF0, 0x7F, 0x7C, 0x7E,
-	0x08, 0x12, 0x2D, 0x5C, 0xEC, 0x54, 0x7F, 0xFC,
-	0x90, 0x82, 0x01, 0x12, 0x20, 0xCE, 0x90, 0x82,
-	0x01, 0x12, 0x44, 0xD9, 0x90, 0x85, 0xBB, 0x12,
-	0x20, 0xCE, 0x7F, 0x7C, 0x7E, 0x08, 0x12, 0x2E,
-	0xA2, 0x90, 0x85, 0xBB, 0x12, 0x20, 0xDA, 0xCC,
-	0xC0, 0x00, 0xC0, 0x7F, 0x8C, 0x7E, 0x08, 0x12,
-	0x2E, 0xA2, 0x90, 0x85, 0xBB, 0x12, 0x20, 0xDA,
-	0x00, 0xC0, 0x00, 0x14, 0x7F, 0x70, 0x7E, 0x0E,
-	0x12, 0x2E, 0xA2, 0x90, 0x81, 0xF9, 0x12, 0x20,
-	0xDA, 0x00, 0x03, 0x3E, 0x60, 0xE4, 0xFD, 0xFF,
-	0xB1, 0x1C, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x91,
-	0x65, 0x90, 0x81, 0x22, 0x74, 0x03, 0xF0, 0x22,
-	0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x81, 0x22,
-	0x04, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0,
-	0x90, 0x05, 0x27, 0xE0, 0x44, 0x40, 0xF0, 0x90,
-	0x81, 0x22, 0x74, 0x01, 0xF0, 0x22, 0x91, 0x65,
-	0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0, 0x90, 0x05,
-	0x27, 0xE0, 0x54, 0xBF, 0xF0, 0x90, 0x81, 0x22,
-	0x74, 0x04, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01,
-	0xC3, 0xC0, 0xD0, 0xC0, 0x07, 0xC0, 0x05, 0x90,
-	0x81, 0xF9, 0x12, 0x44, 0xD9, 0x90, 0x81, 0xE5,
-	0x12, 0x20, 0xCE, 0xD0, 0x05, 0xD0, 0x07, 0x12,
-	0x60, 0xF5, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90,
-	0x81, 0xC8, 0x12, 0x45, 0x1F, 0xEF, 0x12, 0x45,
-	0x28, 0x55, 0x71, 0x00, 0x55, 0x7A, 0x01, 0x55,
-	0x83, 0x02, 0x55, 0x8B, 0x03, 0x55, 0x94, 0x04,
-	0x55, 0x9C, 0x20, 0x55, 0xA4, 0x21, 0x55, 0xAD,
-	0x23, 0x55, 0xB5, 0x24, 0x55, 0xBE, 0x25, 0x55,
-	0xC7, 0x26, 0x55, 0xCF, 0xC0, 0x00, 0x00, 0x55,
-	0xD8, 0x90, 0x81, 0xC8, 0x12, 0x45, 0x16, 0x02,
-	0x6A, 0xB0, 0x90, 0x81, 0xC8, 0x12, 0x45, 0x16,
-	0x02, 0x65, 0x81, 0x90, 0x81, 0xC8, 0x12, 0x45,
-	0x16, 0x41, 0xC0, 0x90, 0x81, 0xC8, 0x12, 0x45,
-	0x16, 0x02, 0x75, 0xD8, 0x90, 0x81, 0xC8, 0x12,
-	0x45, 0x16, 0x80, 0x44, 0x90, 0x81, 0xC8, 0x12,
-	0x45, 0x16, 0xC1, 0x4B, 0x90, 0x81, 0xC8, 0x12,
-	0x45, 0x16, 0x02, 0x6A, 0xF8, 0x90, 0x81, 0xC8,
-	0x12, 0x45, 0x16, 0xE1, 0xE1, 0x90, 0x81, 0xC8,
-	0x12, 0x45, 0x16, 0x02, 0x4A, 0x6C, 0x90, 0x81,
-	0xC8, 0x12, 0x45, 0x16, 0x02, 0x6B, 0x3E, 0x90,
-	0x81, 0xC8, 0x12, 0x45, 0x16, 0x80, 0x3E, 0x90,
-	0x81, 0xC8, 0x12, 0x45, 0x16, 0x02, 0x6B, 0x4E,
-	0x90, 0x01, 0xC0, 0xE0, 0x44, 0x01, 0xF0, 0x22,
-	0x12, 0x5A, 0x4B, 0x12, 0x1F, 0xA4, 0xFF, 0x54,
-	0x01, 0xFE, 0x90, 0x81, 0x45, 0xE0, 0x54, 0xFE,
-	0x4E, 0xF0, 0xEF, 0xC3, 0x13, 0x30, 0xE0, 0x14,
-	0x90, 0x00, 0x01, 0x12, 0x1F, 0xBD, 0x90, 0x81,
-	0x46, 0xF0, 0x90, 0x00, 0x02, 0x12, 0x1F, 0xBD,
-	0x90, 0x81, 0x47, 0xF0, 0x22, 0x12, 0x1F, 0xA4,
-	0xFF, 0x54, 0x01, 0xFE, 0x90, 0x81, 0x3F, 0xE0,
-	0x54, 0xFE, 0x4E, 0xF0, 0x90, 0x00, 0x01, 0x12,
-	0x1F, 0xBD, 0xFE, 0x90, 0x05, 0x54, 0xE0, 0xC3,
-	0x9E, 0x90, 0x81, 0x40, 0xF0, 0xEF, 0x20, 0xE0,
-	0x07, 0x91, 0x65, 0x90, 0x05, 0x22, 0xE4, 0xF0,
-	0x90, 0x81, 0x3F, 0xE0, 0x54, 0x01, 0x90, 0x01,
-	0xBC, 0xF0, 0x90, 0x81, 0x40, 0xE0, 0x90, 0x01,
-	0xBD, 0xF0, 0x22, 0x12, 0x1F, 0xA4, 0xFF, 0x54,
-	0x7F, 0x90, 0x81, 0x27, 0xF0, 0xEF, 0xC4, 0x13,
-	0x13, 0x13, 0x54, 0x01, 0xA3, 0xF0, 0x90, 0x00,
-	0x01, 0x12, 0x1F, 0xBD, 0xFF, 0x54, 0xF0, 0xC4,
-	0x54, 0x0F, 0xFE, 0x90, 0x81, 0x26, 0xE0, 0x54,
-	0xF0, 0x4E, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x1F,
-	0xBD, 0x54, 0x01, 0x25, 0xE0, 0xFE, 0x90, 0x81,
-	0x24, 0xE0, 0x54, 0xFD, 0x4E, 0xF0, 0xEF, 0x54,
-	0x0F, 0xC4, 0x54, 0xF0, 0xFF, 0x90, 0x81, 0x26,
-	0xE0, 0x54, 0x0F, 0x4F, 0xF0, 0x90, 0x00, 0x04,
-	0x12, 0x1F, 0xBD, 0x90, 0x81, 0x29, 0xF0, 0xD1,
-	0xC6, 0x90, 0x01, 0xB9, 0x74, 0x01, 0xF0, 0x90,
-	0x01, 0xB8, 0xF0, 0x90, 0x81, 0x27, 0xE0, 0x90,
-	0x01, 0xBA, 0xF0, 0x90, 0x81, 0x29, 0xE0, 0x90,
-	0x01, 0xBB, 0xF0, 0x90, 0x81, 0x26, 0xE0, 0x54,
-	0x0F, 0x90, 0x01, 0xBE, 0xF0, 0x22, 0x90, 0x81,
-	0xCB, 0x12, 0x45, 0x1F, 0x12, 0x72, 0xB3, 0x90,
-	0x81, 0x27, 0xE0, 0xFF, 0x12, 0x4C, 0x3E, 0x90,
-	0x81, 0x27, 0xE0, 0x60, 0x19, 0x90, 0x81, 0xCB,
-	0x12, 0x45, 0x16, 0x90, 0x00, 0x01, 0x12, 0x1F,
-	0xBD, 0x54, 0x0F, 0xFF, 0x90, 0x00, 0x02, 0x12,
-	0x1F, 0xBD, 0xFD, 0x12, 0x72, 0xC4, 0x22, 0xC0,
-	0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0,
-	0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01,
-	0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05,
-	0xC0, 0x06, 0xC0, 0x07, 0x90, 0x01, 0xC4, 0x74,
-	0xF7, 0xF0, 0x74, 0x56, 0xA3, 0xF0, 0x12, 0x6C,
-	0xA5, 0xE5, 0x49, 0x30, 0xE1, 0x03, 0x12, 0x6F,
-	0x79, 0xE5, 0x49, 0x30, 0xE2, 0x02, 0xF1, 0xA5,
-	0xE5, 0x49, 0x30, 0xE3, 0x03, 0x12, 0x6F, 0x8D,
-	0xE5, 0x4A, 0x30, 0xE0, 0x03, 0x12, 0x6F, 0xC9,
-	0xE5, 0x4A, 0x30, 0xE4, 0x03, 0x12, 0x70, 0x22,
-	0xE5, 0x4B, 0x30, 0xE1, 0x02, 0x51, 0x78, 0xE5,
-	0x4B, 0x30, 0xE0, 0x02, 0x31, 0xFF, 0xE5, 0x4B,
-	0x30, 0xE3, 0x02, 0xF1, 0xE0, 0xE5, 0x4C, 0x30,
-	0xE1, 0x05, 0x7F, 0x03, 0x12, 0x44, 0x27, 0xE5,
-	0x4C, 0x30, 0xE4, 0x03, 0x12, 0x4E, 0xC4, 0xE5,
-	0x4C, 0x30, 0xE5, 0x03, 0x12, 0x70, 0x38, 0xE5,
-	0x4C, 0x30, 0xE6, 0x03, 0x12, 0x70, 0xCE, 0x74,
-	0xF7, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x56,
-	0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05,
-	0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01,
-	0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83,
-	0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0x90, 0x81, 0x27,
-	0xE0, 0x60, 0x34, 0x90, 0x06, 0x92, 0xE0, 0x30,
-	0xE0, 0x23, 0xE4, 0xF5, 0x1D, 0x90, 0x81, 0x3A,
-	0xE0, 0xC3, 0x13, 0x54, 0x7F, 0xF5, 0x1E, 0xE4,
-	0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0x11, 0x05,
-	0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06,
-	0x92, 0x74, 0x01, 0xF0, 0x22, 0x90, 0x81, 0x24,
-	0xE0, 0x54, 0xF7, 0xF0, 0x12, 0x47, 0x2A, 0x22,
-	0x22, 0x12, 0x1F, 0xA4, 0x90, 0x81, 0x31, 0xF0,
-	0x22, 0x90, 0x01, 0xC8, 0xE4, 0xF0, 0xA3, 0xF0,
-	0xA3, 0xF0, 0x7B, 0x01, 0x7A, 0x81, 0x79, 0x51,
-	0x7F, 0xFF, 0xFE, 0x12, 0x2B, 0x27, 0xBF, 0x01,
-	0x09, 0x90, 0x81, 0x51, 0xE0, 0x64, 0x03, 0x60,
-	0x03, 0x22, 0x01, 0xAB, 0xE4, 0x90, 0x81, 0x56,
-	0xF0, 0x90, 0x81, 0x56, 0xE0, 0xFF, 0xC3, 0x94,
-	0x02, 0x40, 0x02, 0x01, 0xE6, 0xC3, 0x74, 0xFE,
-	0x9F, 0xFF, 0xE4, 0x94, 0x00, 0xFE, 0x7B, 0x01,
-	0x7A, 0x81, 0x79, 0x52, 0x12, 0x2B, 0x27, 0xEF,
-	0x64, 0x01, 0x70, 0x77, 0x90, 0x81, 0x52, 0xE0,
-	0xFF, 0x54, 0xC0, 0xFE, 0x60, 0x05, 0xEF, 0x54,
-	0x0C, 0x70, 0x16, 0x90, 0x81, 0x52, 0xE0, 0xFF,
-	0x54, 0x30, 0x60, 0x67, 0xEF, 0x54, 0x03, 0x60,
-	0x62, 0x90, 0x81, 0x53, 0x74, 0x01, 0xF0, 0x80,
-	0x05, 0xE4, 0x90, 0x81, 0x53, 0xF0, 0x90, 0x81,
-	0x53, 0xE0, 0x90, 0x81, 0x52, 0x70, 0x16, 0xE0,
-	0xFF, 0xEE, 0x13, 0x13, 0x54, 0x3F, 0x90, 0x81,
-	0x54, 0xF0, 0xEF, 0x54, 0x0C, 0x13, 0x13, 0x54,
-	0x3F, 0xA3, 0xF0, 0x80, 0x0D, 0xE0, 0xFE, 0x54,
-	0x30, 0x90, 0x81, 0x54, 0xF0, 0xEE, 0x54, 0x03,
-	0xA3, 0xF0, 0x90, 0x81, 0x54, 0xE0, 0x64, 0x30,
-	0x70, 0x54, 0xA3, 0xE0, 0x64, 0x02, 0x70, 0x4E,
-	0x90, 0x00, 0xF5, 0xE0, 0x54, 0x40, 0x90, 0x81,
-	0x57, 0xF0, 0xE0, 0x70, 0x41, 0xA3, 0x74, 0x02,
-	0xF0, 0x80, 0x10, 0x90, 0x81, 0x58, 0x74, 0x01,
-	0xF0, 0x80, 0x08, 0x90, 0x81, 0x56, 0xE0, 0x04,
-	0xF0, 0x01, 0x11, 0x90, 0x01, 0xC4, 0x74, 0xE9,
-	0xF0, 0x74, 0x57, 0xA3, 0xF0, 0x90, 0x81, 0x58,
-	0xE0, 0x90, 0x01, 0xC8, 0xF0, 0x90, 0x81, 0x52,
-	0xE0, 0x90, 0x01, 0xC9, 0xF0, 0x90, 0x81, 0x53,
-	0xE0, 0x90, 0x01, 0xCA, 0xF0, 0xE4, 0xFD, 0x7F,
-	0x1F, 0x12, 0x32, 0x1E, 0x80, 0xD5, 0x22, 0x90,
-	0x00, 0xF7, 0xE0, 0x20, 0xE7, 0x09, 0xE0, 0x7F,
-	0x01, 0x20, 0xE6, 0x0C, 0x7F, 0x02, 0x22, 0x90,
-	0x00, 0xF7, 0xE0, 0x30, 0xE6, 0x02, 0x7F, 0x03,
-	0x22, 0x11, 0xE7, 0x90, 0x80, 0x3C, 0xEF, 0xF0,
-	0x31, 0x13, 0x90, 0x01, 0x64, 0x74, 0x01, 0xF0,
-	0x02, 0x2D, 0xA7, 0x31, 0x81, 0x31, 0xB1, 0x31,
-	0x40, 0x31, 0x5F, 0xE4, 0xF5, 0x35, 0xF5, 0x36,
-	0xF5, 0x37, 0xF5, 0x38, 0xAD, 0x35, 0x7F, 0x50,
-	0x12, 0x32, 0x1E, 0xAD, 0x36, 0x7F, 0x51, 0x12,
-	0x32, 0x1E, 0xAD, 0x37, 0x7F, 0x52, 0x12, 0x32,
-	0x1E, 0xAD, 0x38, 0x7F, 0x53, 0x02, 0x32, 0x1E,
-	0x75, 0x3D, 0x10, 0xE4, 0xF5, 0x3E, 0x75, 0x3F,
-	0x07, 0x75, 0x40, 0x02, 0x90, 0x01, 0x30, 0xE5,
-	0x3D, 0xF0, 0xA3, 0xE5, 0x3E, 0xF0, 0xA3, 0xE5,
-	0x3F, 0xF0, 0xA3, 0xE5, 0x40, 0xF0, 0x22, 0x75,
-	0x45, 0x0E, 0x75, 0x46, 0x01, 0x43, 0x46, 0x10,
-	0x75, 0x47, 0x03, 0x75, 0x48, 0x62, 0x90, 0x01,
-	0x38, 0xE5, 0x45, 0xF0, 0xA3, 0xE5, 0x46, 0xF0,
-	0xA3, 0xE5, 0x47, 0xF0, 0xA3, 0xE5, 0x48, 0xF0,
-	0x22, 0x90, 0x01, 0x30, 0xE4, 0xF0, 0xA3, 0xF0,
-	0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x38, 0xF0,
-	0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xFD, 0x7F,
-	0x50, 0x12, 0x32, 0x1E, 0xE4, 0xFD, 0x7F, 0x51,
-	0x12, 0x32, 0x1E, 0xE4, 0xFD, 0x7F, 0x52, 0x12,
-	0x32, 0x1E, 0xE4, 0xFD, 0x7F, 0x53, 0x02, 0x32,
-	0x1E, 0x90, 0x01, 0x34, 0x74, 0xFF, 0xF0, 0xA3,
-	0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x3C,
-	0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xFD,
-	0x7F, 0x54, 0x12, 0x32, 0x1E, 0x7D, 0xFF, 0x7F,
-	0x55, 0x12, 0x32, 0x1E, 0x7D, 0xFF, 0x7F, 0x56,
-	0x12, 0x32, 0x1E, 0x7D, 0xFF, 0x7F, 0x57, 0x02,
-	0x32, 0x1E, 0x90, 0x00, 0x80, 0xE0, 0x44, 0x80,
-	0xFD, 0x7F, 0x80, 0x12, 0x32, 0x1E, 0x90, 0xFD,
-	0x00, 0xE0, 0x54, 0xBF, 0xF0, 0x12, 0x57, 0xE9,
-	0x51, 0x77, 0x12, 0x32, 0x77, 0x51, 0xC9, 0x51,
-	0x5E, 0x7F, 0x01, 0x12, 0x43, 0x15, 0x90, 0x81,
-	0x41, 0x74, 0x02, 0xF0, 0xFF, 0x12, 0x43, 0x15,
-	0x90, 0x81, 0x41, 0xE0, 0x04, 0xF0, 0x7F, 0x03,
-	0x12, 0x43, 0x15, 0x90, 0x81, 0x41, 0xE0, 0x04,
-	0xF0, 0x31, 0x01, 0x51, 0x3F, 0x90, 0x00, 0x80,
-	0xE0, 0x44, 0x40, 0xFD, 0x7F, 0x80, 0x12, 0x32,
-	0x1E, 0x75, 0x20, 0xFF, 0x51, 0x68, 0x51, 0xF9,
-	0x51, 0x7F, 0xE4, 0xFF, 0x02, 0x43, 0x9E, 0x51,
-	0x62, 0x51, 0x6F, 0x51, 0xA7, 0x71, 0x4F, 0x51,
-	0x8A, 0x51, 0x95, 0x90, 0x81, 0x45, 0xE0, 0x54,
-	0xFE, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0xA3, 0xF0,
-	0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0x22, 0xE4, 0xF5,
-	0x4D, 0x22, 0xE4, 0x90, 0x80, 0xDE, 0xF0, 0x22,
-	0x75, 0xE8, 0x03, 0x75, 0xA8, 0x84, 0x22, 0xE4,
-	0x90, 0x80, 0xD8, 0xF0, 0xA3, 0xF0, 0x22, 0x90,
-	0x01, 0x94, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0x90,
-	0x01, 0xE4, 0x74, 0x0B, 0xF0, 0xA3, 0x74, 0x01,
-	0xF0, 0x22, 0x90, 0x81, 0x3F, 0xE0, 0x54, 0xFE,
-	0xF0, 0xE4, 0xA3, 0xF0, 0x22, 0x90, 0x81, 0x42,
-	0xE0, 0x54, 0xFE, 0xF0, 0x54, 0x7F, 0xF0, 0xA3,
-	0x74, 0x0A, 0xF0, 0xE4, 0xA3, 0xF0, 0x22, 0x90,
-	0x81, 0x1F, 0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFD,
-	0xF0, 0x54, 0xFB, 0xF0, 0x54, 0xF7, 0xF0, 0x54,
-	0xEF, 0xF0, 0x54, 0xDF, 0xF0, 0xE4, 0xA3, 0xF0,
-	0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0x74, 0x0C, 0xF0,
-	0x22, 0x90, 0x01, 0x01, 0xE0, 0x44, 0x04, 0xF0,
-	0x90, 0x01, 0x9C, 0x74, 0x7E, 0xF0, 0xA3, 0x74,
-	0x92, 0xF0, 0xA3, 0x74, 0xA0, 0xF0, 0xA3, 0x74,
-	0x24, 0xF0, 0x90, 0x01, 0x9B, 0x74, 0x49, 0xF0,
-	0x90, 0x01, 0x9A, 0x74, 0xE0, 0xF0, 0x90, 0x01,
-	0x99, 0xE4, 0xF0, 0x90, 0x01, 0x98, 0x04, 0xF0,
-	0x22, 0xE4, 0x90, 0x81, 0x51, 0xF0, 0xA3, 0xF0,
-	0x90, 0x01, 0x98, 0xE0, 0x7F, 0x00, 0x30, 0xE4,
-	0x02, 0x7F, 0x01, 0xEF, 0x64, 0x01, 0x60, 0x3E,
-	0xC3, 0x90, 0x81, 0x52, 0xE0, 0x94, 0x88, 0x90,
-	0x81, 0x51, 0xE0, 0x94, 0x13, 0x40, 0x08, 0x90,
-	0x01, 0xC1, 0xE0, 0x44, 0x10, 0xF0, 0x22, 0x90,
-	0x81, 0x51, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x44,
-	0xA9, 0x7F, 0x14, 0x7E, 0x00, 0x12, 0x32, 0xAA,
-	0xD3, 0x90, 0x81, 0x52, 0xE0, 0x94, 0x32, 0x90,
-	0x81, 0x51, 0xE0, 0x94, 0x00, 0x40, 0xB9, 0x90,
-	0x01, 0xC6, 0xE0, 0x30, 0xE3, 0xB2, 0x22, 0xE4,
-	0x90, 0x81, 0x27, 0xF0, 0xA3, 0xF0, 0x90, 0x81,
-	0x26, 0xE0, 0x54, 0x0F, 0xF0, 0x54, 0xF0, 0xF0,
-	0x90, 0x81, 0x24, 0xE0, 0x54, 0xFD, 0xF0, 0x54,
-	0xF7, 0xF0, 0x54, 0xEF, 0xF0, 0x90, 0x81, 0x2D,
-	0x74, 0x01, 0xF0, 0xA3, 0xF0, 0x90, 0x81, 0x24,
-	0xE0, 0x54, 0xFB, 0xF0, 0xA3, 0xE0, 0x54, 0xFB,
-	0xF0, 0xE4, 0x90, 0x81, 0x30, 0xF0, 0x90, 0x81,
-	0x2F, 0x74, 0x07, 0xF0, 0x90, 0x81, 0x32, 0xE4,
-	0xF0, 0xA3, 0x74, 0x02, 0xF0, 0xE4, 0x90, 0x81,
-	0x2B, 0xF0, 0x90, 0x81, 0x24, 0xE0, 0x54, 0xFE,
-	0xF0, 0x90, 0x81, 0x29, 0x74, 0x0C, 0xF0, 0x90,
-	0x81, 0x24, 0xE0, 0x54, 0xDF, 0xF0, 0x90, 0x81,
-	0x2A, 0x74, 0x0C, 0xF0, 0x90, 0x81, 0x24, 0xE0,
-	0x54, 0xBF, 0xF0, 0x54, 0x7F, 0xF0, 0xA3, 0xE0,
-	0x54, 0xFE, 0xF0, 0x54, 0xFD, 0xF0, 0x54, 0xF7,
-	0xF0, 0x90, 0x81, 0x34, 0x12, 0x20, 0xDA, 0x00,
-	0x00, 0x00, 0x00, 0x90, 0x80, 0x3C, 0xE0, 0xB4,
-	0x01, 0x08, 0x90, 0x81, 0x31, 0x74, 0x99, 0xF0,
-	0x80, 0x12, 0x90, 0x80, 0x3C, 0xE0, 0x90, 0x81,
-	0x31, 0xB4, 0x03, 0x05, 0x74, 0x90, 0xF0, 0x80,
-	0x03, 0x74, 0x40, 0xF0, 0x90, 0x81, 0x38, 0x74,
-	0x01, 0xF0, 0xA3, 0x74, 0x05, 0xF0, 0xA3, 0xE0,
-	0x54, 0x01, 0x44, 0x28, 0xF0, 0xA3, 0x74, 0x05,
-	0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xE0, 0x54, 0xFD,
-	0xF0, 0x54, 0xFB, 0xF0, 0x54, 0xF7, 0xF0, 0x54,
-	0xEF, 0xF0, 0x54, 0xDF, 0xF0, 0x54, 0xBF, 0xF0,
-	0xE4, 0xA3, 0xF0, 0x22, 0xE4, 0x90, 0x81, 0x59,
-	0xF0, 0x90, 0x81, 0x59, 0xE0, 0x64, 0x01, 0xF0,
-	0x24, 0x24, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x5C,
-	0xA3, 0xF0, 0x90, 0x81, 0x2A, 0xE0, 0xFF, 0x90,
-	0x81, 0x29, 0xE0, 0x6F, 0x60, 0x03, 0x12, 0x47,
-	0x2A, 0xD1, 0x08, 0xBF, 0x01, 0x02, 0x91, 0x5F,
-	0xB1, 0xF2, 0x12, 0x32, 0x9E, 0xBF, 0x01, 0x02,
-	0xB1, 0x67, 0x12, 0x42, 0x4D, 0x80, 0xCA, 0xD3,
-	0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x81,
-	0x24, 0xE0, 0x30, 0xE0, 0x24, 0x90, 0x81, 0x1F,
-	0xE0, 0xFF, 0x30, 0xE0, 0x1A, 0xC3, 0x13, 0x30,
-	0xE0, 0x07, 0xB1, 0xFB, 0xBF, 0x01, 0x12, 0x80,
-	0x0A, 0x90, 0x81, 0x23, 0xE0, 0xFF, 0x60, 0x03,
-	0xB4, 0x08, 0x06, 0x91, 0x96, 0x80, 0x02, 0x91,
-	0xA6, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
-	0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xB1, 0x22, 0x91,
-	0xBA, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x81,
-	0x2A, 0xE0, 0x70, 0x0D, 0xD1, 0x2F, 0xBF, 0x01,
-	0x08, 0x91, 0x96, 0x90, 0x01, 0xE5, 0xE0, 0x04,
-	0xF0, 0x22, 0xB1, 0xF3, 0x90, 0x00, 0x08, 0xE0,
-	0x54, 0xEF, 0xFD, 0x7F, 0x08, 0x12, 0x32, 0x1E,
-	0xE4, 0xFF, 0x8F, 0x50, 0xE4, 0x90, 0x81, 0x5A,
-	0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x09, 0xE0, 0x7F,
-	0x00, 0x30, 0xE7, 0x02, 0x7F, 0x01, 0xEF, 0x65,
-	0x50, 0x60, 0x3E, 0xC3, 0x90, 0x81, 0x5B, 0xE0,
-	0x94, 0x88, 0x90, 0x81, 0x5A, 0xE0, 0x94, 0x13,
-	0x40, 0x08, 0x90, 0x01, 0xC0, 0xE0, 0x44, 0x10,
-	0xF0, 0x22, 0x90, 0x81, 0x5A, 0xE4, 0x75, 0xF0,
-	0x01, 0x12, 0x44, 0xA9, 0x7F, 0x14, 0x7E, 0x00,
-	0x12, 0x32, 0xAA, 0xD3, 0x90, 0x81, 0x5B, 0xE0,
-	0x94, 0x32, 0x90, 0x81, 0x5A, 0xE0, 0x94, 0x00,
-	0x40, 0xB9, 0x90, 0x01, 0xC6, 0xE0, 0x30, 0xE0,
-	0xB2, 0x22, 0x90, 0x81, 0x31, 0xE0, 0xFD, 0x7F,
-	0x93, 0x12, 0x32, 0x1E, 0x90, 0x81, 0x28, 0xE0,
-	0x60, 0x12, 0x90, 0x01, 0x2F, 0xE0, 0x30, 0xE7,
-	0x05, 0x74, 0x10, 0xF0, 0x80, 0x06, 0x90, 0x01,
-	0x2F, 0x74, 0x90, 0xF0, 0x90, 0x00, 0x08, 0xE0,
-	0x44, 0x10, 0xFD, 0x7F, 0x08, 0x12, 0x32, 0x1E,
-	0x7F, 0x01, 0x91, 0xCA, 0x90, 0x00, 0x90, 0xE0,
-	0x44, 0x01, 0xFD, 0x7F, 0x90, 0x12, 0x32, 0x1E,
-	0x7F, 0x14, 0x7E, 0x00, 0x02, 0x32, 0xAA, 0xD3,
-	0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x12, 0x2D,
-	0xA7, 0xE4, 0xF5, 0x52, 0x12, 0x32, 0x9E, 0xEF,
-	0x60, 0x73, 0x63, 0x52, 0x01, 0xE5, 0x52, 0x24,
-	0x67, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x5D, 0xA3,
-	0xF0, 0x90, 0x00, 0x88, 0xE0, 0xF5, 0x50, 0xF5,
-	0x51, 0x54, 0x0F, 0x60, 0xDF, 0xE5, 0x50, 0x30,
-	0xE0, 0x0B, 0x20, 0xE4, 0x03, 0x12, 0x29, 0xC5,
-	0x53, 0x51, 0xEE, 0x80, 0x3F, 0xE5, 0x50, 0x30,
-	0xE1, 0x16, 0x20, 0xE5, 0x0E, 0x12, 0x11, 0xBD,
-	0xEF, 0x70, 0x03, 0x43, 0x51, 0x20, 0x90, 0x01,
-	0x06, 0xE4, 0xF0, 0x53, 0x51, 0xFD, 0x80, 0x24,
-	0xE5, 0x50, 0x30, 0xE2, 0x0B, 0x20, 0xE6, 0x03,
-	0x12, 0x67, 0x06, 0x53, 0x51, 0xFB, 0x80, 0x14,
-	0xE5, 0x50, 0x30, 0xE3, 0x0F, 0x20, 0xE7, 0x09,
-	0x12, 0x61, 0x6E, 0xEF, 0x70, 0x03, 0x43, 0x51,
-	0x80, 0x53, 0x51, 0xF7, 0xAD, 0x51, 0x7F, 0x88,
-	0x12, 0x32, 0x1E, 0x80, 0x87, 0xD0, 0xD0, 0x92,
-	0xAF, 0x22, 0x22, 0x90, 0x00, 0x90, 0xE0, 0x20,
-	0xE0, 0xF9, 0x22, 0x90, 0x81, 0x22, 0xE0, 0x64,
-	0x02, 0x7F, 0x01, 0x60, 0x02, 0x7F, 0x00, 0x22,
-	0x7F, 0x02, 0x90, 0x81, 0x41, 0xE0, 0xFE, 0xEF,
-	0xC3, 0x9E, 0x50, 0x18, 0xEF, 0x25, 0xE0, 0x24,
-	0x81, 0xF8, 0xE6, 0x30, 0xE4, 0x0B, 0x90, 0x01,
-	0xB8, 0x74, 0x08, 0xF0, 0xA3, 0xF0, 0x7F, 0x00,
-	0x22, 0x0F, 0x80, 0xDE, 0x7F, 0x01, 0x22, 0x90,
-	0x02, 0x87, 0xE0, 0x60, 0x08, 0x90, 0x01, 0xB8,
-	0x74, 0x01, 0xF0, 0x80, 0x17, 0x90, 0x02, 0x86,
-	0xE0, 0x20, 0xE1, 0x08, 0x90, 0x01, 0xB8, 0x74,
-	0x04, 0xF0, 0x80, 0x08, 0x90, 0x01, 0xB8, 0xE4,
-	0xF0, 0x7F, 0x01, 0x22, 0x90, 0x01, 0xB9, 0x74,
-	0x08, 0xF0, 0x7F, 0x00, 0x22, 0xE4, 0xFB, 0xFA,
-	0xFD, 0x7F, 0x01, 0x12, 0x44, 0x4E, 0x90, 0x81,
-	0xBD, 0xEF, 0xF0, 0x60, 0xF0, 0xD1, 0x71, 0x80,
-	0xEC, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
-	0x90, 0x01, 0xCC, 0xE0, 0x54, 0x0F, 0x90, 0x81,
-	0xBE, 0xF0, 0x90, 0x81, 0xBE, 0xE0, 0xFD, 0x70,
-	0x02, 0xE1, 0x9C, 0x90, 0x82, 0x09, 0xE0, 0xFF,
-	0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80,
-	0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
-	0xFF, 0xEF, 0x5D, 0x70, 0x02, 0xE1, 0x95, 0x90,
-	0x82, 0x09, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01,
-	0xD0, 0x12, 0x45, 0x0A, 0xE0, 0x90, 0x81, 0xBF,
-	0xF0, 0x75, 0x13, 0x01, 0x75, 0x14, 0x81, 0x75,
-	0x15, 0xBF, 0x75, 0x16, 0x01, 0x7B, 0x01, 0x7A,
-	0x81, 0x79, 0xC0, 0x12, 0x2B, 0xED, 0x90, 0x82,
-	0x09, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD1,
-	0x12, 0x45, 0x0A, 0xE0, 0x90, 0x81, 0xC1, 0xF0,
-	0x90, 0x82, 0x09, 0xE0, 0x75, 0xF0, 0x04, 0x90,
-	0x01, 0xD2, 0x12, 0x45, 0x0A, 0xE0, 0x90, 0x81,
-	0xC2, 0xF0, 0x90, 0x82, 0x09, 0xE0, 0x75, 0xF0,
-	0x04, 0x90, 0x01, 0xD3, 0x12, 0x45, 0x0A, 0xE0,
-	0x90, 0x81, 0xC3, 0xF0, 0x90, 0x82, 0x09, 0xE0,
-	0x75, 0xF0, 0x04, 0x90, 0x01, 0xF0, 0x12, 0x45,
-	0x0A, 0xE0, 0x90, 0x81, 0xC4, 0xF0, 0x90, 0x82,
-	0x09, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xF1,
-	0x12, 0x45, 0x0A, 0xE0, 0x90, 0x81, 0xC5, 0xF0,
-	0x90, 0x82, 0x09, 0xE0, 0x75, 0xF0, 0x04, 0x90,
-	0x01, 0xF2, 0x12, 0x45, 0x0A, 0xE0, 0x90, 0x81,
-	0xC6, 0xF0, 0x90, 0x82, 0x09, 0xE0, 0x75, 0xF0,
-	0x04, 0x90, 0x01, 0xF3, 0x12, 0x45, 0x0A, 0xE0,
-	0x90, 0x81, 0xC7, 0xF0, 0x90, 0x81, 0xBE, 0xE0,
-	0xFF, 0x90, 0x82, 0x09, 0xE0, 0xFE, 0x74, 0x01,
-	0xA8, 0x06, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8,
-	0xFC, 0xF4, 0x5F, 0x90, 0x81, 0xBE, 0xF0, 0x90,
-	0x82, 0x09, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07,
-	0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0x90,
-	0x01, 0xCC, 0xF0, 0x90, 0x81, 0xC0, 0xE0, 0xFF,
-	0x7B, 0x01, 0x7A, 0x81, 0x79, 0xC1, 0x12, 0x55,
-	0x3F, 0x90, 0x82, 0x09, 0xE0, 0x04, 0xF0, 0xE0,
-	0x54, 0x03, 0xF0, 0xC1, 0x82, 0x90, 0x01, 0xC0,
-	0xE0, 0x44, 0x02, 0xF0, 0xD0, 0xD0, 0x92, 0xAF,
-	0x22, 0xE4, 0xFB, 0xFA, 0xFD, 0x7F, 0x01, 0x12,
-	0x44, 0x4E, 0x90, 0x81, 0xD0, 0xEF, 0xF0, 0x60,
-	0xF0, 0x12, 0x6C, 0x19, 0x80, 0xEB, 0x90, 0x81,
-	0xD4, 0xEF, 0xF0, 0xA3, 0xED, 0xF0, 0xA3, 0x12,
-	0x20, 0xDA, 0x00, 0x00, 0x00, 0x00, 0xE4, 0x90,
-	0x81, 0xE2, 0xF0, 0x7F, 0x24, 0x7E, 0x08, 0x12,
-	0x2D, 0x5C, 0x90, 0x81, 0xDA, 0x12, 0x20, 0xCE,
-	0x90, 0x81, 0xD4, 0xE0, 0xFB, 0x70, 0x08, 0x90,
-	0x81, 0xDA, 0x12, 0x44, 0xD9, 0x80, 0x16, 0xEB,
-	0x75, 0xF0, 0x08, 0xA4, 0x24, 0x62, 0xF5, 0x82,
-	0xE4, 0x34, 0x87, 0xF5, 0x83, 0xE0, 0xFE, 0xA3,
-	0xE0, 0xFF, 0x12, 0x2D, 0x5C, 0x90, 0x81, 0xDE,
-	0x12, 0x20, 0xCE, 0x90, 0x81, 0xD5, 0xE0, 0xFF,
-	0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x17, 0x12, 0x20,
-	0xBB, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB,
-	0x07, 0x90, 0x81, 0xDE, 0x12, 0x44, 0xD9, 0xED,
-	0x54, 0x7F, 0xFD, 0xEC, 0x54, 0x80, 0xFC, 0x12,
-	0x44, 0xCC, 0xEC, 0x44, 0x80, 0xFC, 0x90, 0x81,
-	0xDE, 0x12, 0x20, 0xCE, 0x90, 0x81, 0xDA, 0x12,
-	0x44, 0xD9, 0xEC, 0x54, 0x7F, 0xFC, 0x90, 0x85,
-	0xBB, 0x12, 0x20, 0xCE, 0x7F, 0x24, 0x7E, 0x08,
-	0x12, 0x2E, 0xA2, 0x90, 0x81, 0xD4, 0xE0, 0x75,
-	0xF0, 0x08, 0xA4, 0x24, 0x62, 0xF5, 0x82, 0xE4,
-	0x34, 0x87, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0,
-	0xFF, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x81, 0xDE,
-	0x12, 0x44, 0xD9, 0x90, 0x85, 0xBB, 0x12, 0x20,
-	0xCE, 0xD0, 0x07, 0xD0, 0x06, 0x12, 0x2E, 0xA2,
-	0x90, 0x81, 0xDA, 0x12, 0x44, 0xD9, 0xEC, 0x44,
-	0x80, 0xFC, 0x90, 0x85, 0xBB, 0x12, 0x20, 0xCE,
-	0x7F, 0x24, 0x7E, 0x08, 0x12, 0x2E, 0xA2, 0x90,
-	0x81, 0xD4, 0xE0, 0x70, 0x04, 0x7F, 0x20, 0x80,
-	0x09, 0x90, 0x81, 0xD4, 0xE0, 0xB4, 0x01, 0x16,
-	0x7F, 0x28, 0x7E, 0x08, 0x12, 0x2D, 0x5C, 0x78,
-	0x08, 0x12, 0x20, 0xA8, 0xEF, 0x54, 0x01, 0xFF,
-	0xE4, 0x90, 0x81, 0xE2, 0xEF, 0xF0, 0x90, 0x81,
-	0xE2, 0xE0, 0x90, 0x81, 0xD4, 0x60, 0x0E, 0xE0,
-	0x75, 0xF0, 0x08, 0xA4, 0x24, 0x66, 0xF5, 0x82,
-	0xE4, 0x34, 0x87, 0x80, 0x0C, 0xE0, 0x75, 0xF0,
-	0x08, 0xA4, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34,
-	0x87, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF,
-	0x12, 0x2D, 0x5C, 0xED, 0x54, 0x0F, 0xFD, 0xE4,
-	0xFC, 0x90, 0x81, 0xD6, 0x12, 0x20, 0xCE, 0x90,
-	0x81, 0xD6, 0x02, 0x44, 0xD9, 0x90, 0x81, 0xE3,
-	0xEF, 0xF0, 0xAB, 0x05, 0x90, 0x81, 0xE9, 0x12,
-	0x20, 0xDA, 0x00, 0x00, 0x00, 0x00, 0xAF, 0x03,
-	0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x14, 0x12, 0x20,
-	0xBB, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB,
-	0x07, 0x90, 0x81, 0xE5, 0x12, 0x44, 0xD9, 0xED,
-	0x54, 0x0F, 0xFD, 0xE4, 0xFC, 0x12, 0x44, 0xCC,
-	0xEC, 0x54, 0x0F, 0xFC, 0x90, 0x81, 0xE9, 0x12,
-	0x20, 0xCE, 0x90, 0x81, 0xE3, 0xE0, 0x75, 0xF0,
-	0x08, 0xA4, 0x24, 0x60, 0xF5, 0x82, 0xE4, 0x34,
-	0x87, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF,
-	0xC0, 0x06, 0xC0, 0x07, 0x90, 0x81, 0xE9, 0x12,
-	0x44, 0xD9, 0x90, 0x85, 0xBB, 0x12, 0x20, 0xCE,
-	0xD0, 0x07, 0xD0, 0x06, 0x02, 0x2E, 0xA2, 0xD3,
-	0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x12, 0x5F,
-	0xB6, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x78, 0x10,
-	0x74, 0x01, 0xF2, 0x90, 0x02, 0x09, 0xE0, 0x78,
-	0x00, 0xF2, 0x08, 0x74, 0x20, 0xF2, 0x18, 0xE2,
-	0xFF, 0x30, 0xE0, 0x05, 0x08, 0xE2, 0x24, 0x80,
-	0xF2, 0xEF, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0,
-	0x78, 0x01, 0xE2, 0x24, 0x00, 0xF5, 0x82, 0xE4,
-	0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x78, 0x03, 0xF2,
-	0x64, 0x04, 0x60, 0x0D, 0xE2, 0xFF, 0x64, 0x08,
-	0x60, 0x07, 0xEF, 0x64, 0x0C, 0x60, 0x02, 0x61,
-	0xDE, 0xE4, 0x78, 0x02, 0xF2, 0x78, 0x03, 0xE2,
-	0xFF, 0x18, 0xE2, 0xC3, 0x9F, 0x50, 0x2D, 0xE2,
-	0xFD, 0x18, 0xE2, 0x2D, 0x90, 0x81, 0x5A, 0xF0,
-	0xE0, 0xFF, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34,
-	0xFC, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0x04, 0x2D,
-	0xF8, 0xEE, 0xF2, 0xEF, 0xB4, 0xFF, 0x06, 0x90,
-	0xFD, 0x10, 0xE0, 0x04, 0xF0, 0x78, 0x02, 0xE2,
-	0x04, 0xF2, 0x80, 0xC9, 0x78, 0x04, 0xE2, 0x78,
-	0x12, 0xF2, 0xFF, 0x78, 0x05, 0xE2, 0x78, 0x11,
-	0xF2, 0x78, 0x06, 0xE2, 0x78, 0x13, 0xF2, 0x78,
-	0x07, 0xE2, 0x78, 0x14, 0xF2, 0x78, 0x08, 0xE2,
-	0x78, 0x33, 0xF2, 0x78, 0x09, 0xE2, 0x78, 0x34,
-	0xF2, 0x78, 0x0A, 0xE2, 0x78, 0x35, 0xF2, 0x78,
-	0x0B, 0xE2, 0x78, 0x36, 0xF2, 0x78, 0x0C, 0xE2,
-	0x78, 0x37, 0xF2, 0x78, 0x0D, 0xE2, 0x78, 0x38,
-	0xF2, 0x78, 0x0E, 0xE2, 0x78, 0x39, 0xF2, 0x78,
-	0x0F, 0xE2, 0x78, 0x3A, 0xF2, 0xE4, 0x78, 0x15,
-	0xF2, 0xEF, 0x24, 0xF8, 0x60, 0x75, 0x24, 0xFC,
-	0x60, 0x6C, 0x24, 0x08, 0x60, 0x02, 0x61, 0xC0,
-	0x78, 0x11, 0xE2, 0xB4, 0x01, 0x05, 0x12, 0x29,
-	0xC5, 0x61, 0xC5, 0x78, 0x11, 0xE2, 0xB4, 0x02,
-	0x05, 0x12, 0x11, 0xBD, 0x61, 0xC5, 0x78, 0x11,
-	0xE2, 0xB4, 0x03, 0x04, 0xF1, 0x06, 0x61, 0xC5,
-	0x78, 0x11, 0xE2, 0xB4, 0x10, 0x17, 0x78, 0x14,
-	0xE2, 0xFE, 0x18, 0xE2, 0xFD, 0xED, 0xFF, 0x78,
-	0x16, 0xEE, 0xF2, 0xFE, 0x08, 0xEF, 0xF2, 0xFF,
-	0x12, 0x32, 0xAA, 0x61, 0xC5, 0x78, 0x11, 0xE2,
-	0xB4, 0x11, 0x17, 0x78, 0x14, 0xE2, 0xFE, 0x18,
-	0xE2, 0xFD, 0xED, 0xFF, 0x78, 0x16, 0xEE, 0xF2,
-	0xFE, 0x08, 0xEF, 0xF2, 0xFF, 0x12, 0x32, 0x06,
-	0x61, 0xC5, 0x78, 0x11, 0xE2, 0xF4, 0x60, 0x02,
-	0x61, 0xC5, 0x18, 0xF2, 0x61, 0xC5, 0x78, 0x15,
-	0x74, 0x01, 0xF2, 0x78, 0x11, 0xE2, 0x64, 0x07,
-	0x60, 0x02, 0x61, 0xAA, 0x78, 0x34, 0xE2, 0xFF,
-	0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x08, 0x12, 0x20,
-	0xBB, 0xC0, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB,
-	0x07, 0x78, 0x33, 0xE2, 0xFF, 0xE4, 0xFC, 0xFD,
-	0xFE, 0xD0, 0x00, 0x12, 0x44, 0xCC, 0xC0, 0x04,
-	0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x78, 0x35,
-	0xE2, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x10,
-	0x12, 0x20, 0xBB, 0xD0, 0x03, 0xD0, 0x02, 0xD0,
-	0x01, 0xD0, 0x00, 0x12, 0x44, 0xCC, 0x78, 0x18,
-	0x12, 0x44, 0xFE, 0x78, 0x15, 0xE2, 0x70, 0x02,
-	0x61, 0x93, 0x18, 0xE2, 0xFF, 0x18, 0xE2, 0xFD,
-	0x31, 0x5F, 0x78, 0x1C, 0x12, 0x44, 0xFE, 0x78,
-	0x38, 0xE2, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78,
-	0x08, 0x12, 0x20, 0xBB, 0xC0, 0x04, 0xA9, 0x05,
-	0xAA, 0x06, 0xAB, 0x07, 0x78, 0x37, 0xE2, 0xFF,
-	0xE4, 0xFC, 0xFD, 0xFE, 0xD0, 0x00, 0x12, 0x44,
-	0xCC, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0,
-	0x07, 0x78, 0x39, 0xE2, 0xFF, 0xE4, 0xFC, 0xFD,
-	0xFE, 0x78, 0x10, 0x12, 0x20, 0xBB, 0xD0, 0x03,
-	0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0x12, 0x44,
-	0xCC, 0x78, 0x20, 0x12, 0x44, 0xFE, 0x78, 0x20,
-	0x12, 0x44, 0xE5, 0x12, 0x20, 0x9B, 0x78, 0x1C,
-	0x12, 0x44, 0xF1, 0x12, 0x44, 0xBF, 0xC0, 0x04,
-	0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x78, 0x18,
-	0x12, 0x44, 0xE5, 0x78, 0x20, 0x12, 0x44, 0xF1,
-	0x12, 0x44, 0xBF, 0xD0, 0x03, 0xD0, 0x02, 0xD0,
-	0x01, 0xD0, 0x00, 0x12, 0x44, 0xCC, 0x78, 0x18,
-	0x12, 0x44, 0xFE, 0x78, 0x18, 0x12, 0x44, 0xE5,
-	0x90, 0x81, 0xF9, 0x12, 0x20, 0xCE, 0x78, 0x13,
-	0xE2, 0xFD, 0x08, 0xE2, 0xFF, 0x12, 0x55, 0x1C,
-	0x80, 0x1B, 0x78, 0x13, 0xE2, 0xFF, 0x08, 0xE2,
-	0xFD, 0x78, 0x11, 0xE2, 0xFB, 0x78, 0x15, 0xE2,
-	0x90, 0x81, 0xBC, 0xF0, 0x71, 0xE1, 0x80, 0x05,
-	0x78, 0x10, 0x74, 0x02, 0xF2, 0x78, 0x10, 0xE2,
-	0xFF, 0xC3, 0x94, 0x02, 0x50, 0x10, 0xEF, 0x60,
-	0x0A, 0x78, 0x02, 0xE2, 0xFF, 0x18, 0xE2, 0x2F,
-	0xF2, 0x21, 0x90, 0x7F, 0x01, 0x22, 0x7F, 0x00,
-	0x22, 0xAC, 0x07, 0xED, 0xAD, 0x04, 0x78, 0x24,
-	0xF2, 0xED, 0x08, 0xF2, 0xEB, 0xB4, 0x04, 0x07,
-	0x78, 0x27, 0x74, 0x01, 0xF2, 0x80, 0x0E, 0xEB,
-	0x78, 0x27, 0xB4, 0x05, 0x05, 0x74, 0x02, 0xF2,
-	0x80, 0x03, 0x74, 0x04, 0xF2, 0xD3, 0x78, 0x25,
-	0xE2, 0x94, 0xFF, 0x18, 0xE2, 0x94, 0x00, 0x50,
-	0x63, 0xE4, 0x78, 0x26, 0xF2, 0x78, 0x27, 0xE2,
-	0xFF, 0x18, 0xE2, 0xFE, 0xC3, 0x9F, 0x40, 0x02,
-	0xA1, 0x7F, 0x74, 0x33, 0x2E, 0xF8, 0xE2, 0x78,
-	0x28, 0xF2, 0x90, 0x81, 0xBC, 0xE0, 0x60, 0x2D,
-	0x74, 0x37, 0x2E, 0xF8, 0xE2, 0x78, 0x32, 0xF2,
-	0xEE, 0xFF, 0x78, 0x25, 0xE2, 0x2F, 0xFF, 0x18,
-	0xE2, 0x34, 0x00, 0x8F, 0x82, 0xF5, 0x83, 0xE0,
-	0x78, 0x29, 0xF2, 0x78, 0x32, 0xE2, 0xFF, 0xF4,
-	0xFE, 0x78, 0x29, 0xE2, 0x5E, 0xFE, 0x18, 0xE2,
-	0xFD, 0xEF, 0x5D, 0x4E, 0xF2, 0x78, 0x24, 0x08,
-	0xE2, 0xFF, 0x08, 0xE2, 0x2F, 0xFF, 0x78, 0x28,
-	0xE2, 0xFD, 0x12, 0x32, 0x1E, 0x78, 0x26, 0xE2,
-	0x04, 0xF2, 0x80, 0xA1, 0xD3, 0x78, 0x25, 0xE2,
-	0x94, 0xFF, 0x18, 0xE2, 0x94, 0x07, 0x50, 0x69,
-	0xE4, 0x78, 0x26, 0xF2, 0x78, 0x27, 0xE2, 0xFF,
-	0x18, 0xE2, 0xFE, 0xC3, 0x9F, 0x40, 0x02, 0xA1,
-	0x7F, 0x74, 0x33, 0x2E, 0xF8, 0xE2, 0x78, 0x28,
-	0xF2, 0x90, 0x81, 0xBC, 0xE0, 0x60, 0x2D, 0x78,
-	0x26, 0xE2, 0xFF, 0xFD, 0x18, 0xE2, 0x2D, 0xFD,
-	0x18, 0xE2, 0x34, 0x00, 0x8D, 0x82, 0xF5, 0x83,
-	0xE0, 0x78, 0x29, 0xF2, 0x74, 0x37, 0x2F, 0xF8,
-	0xE2, 0x78, 0x32, 0xF2, 0xE2, 0xFF, 0xF4, 0xFE,
-	0x78, 0x29, 0xE2, 0x5E, 0xFE, 0x18, 0xE2, 0xFD,
-	0xEF, 0x5D, 0x4E, 0xF2, 0x78, 0x28, 0xE2, 0xFF,
-	0x78, 0x26, 0xE2, 0xFD, 0x18, 0xE2, 0x2D, 0xFD,
-	0x18, 0xE2, 0x34, 0x00, 0x8D, 0x82, 0xF5, 0x83,
-	0xEF, 0xF0, 0x78, 0x26, 0xE2, 0x04, 0xF2, 0x80,
-	0x9B, 0x90, 0x81, 0xBC, 0xE0, 0x60, 0x0F, 0x78,
-	0x24, 0xE2, 0xFE, 0x08, 0xE2, 0xFF, 0x12, 0x2D,
-	0x5C, 0x78, 0x2E, 0x12, 0x44, 0xFE, 0xE4, 0x78,
-	0x26, 0xF2, 0x78, 0x27, 0xE2, 0xFF, 0x18, 0xE2,
-	0xFE, 0xC3, 0x9F, 0x50, 0x5D, 0x74, 0x33, 0x2E,
-	0xF8, 0xE2, 0x78, 0x28, 0xF2, 0x90, 0x81, 0xBC,
-	0xE0, 0x60, 0x2B, 0x78, 0x2E, 0x12, 0x44, 0xE5,
-	0x78, 0x26, 0xE2, 0xFB, 0x75, 0xF0, 0x08, 0xA4,
-	0xF9, 0xF8, 0x12, 0x20, 0xA8, 0x78, 0x29, 0xEF,
-	0xF2, 0x74, 0x37, 0x2B, 0xF8, 0xE2, 0x78, 0x32,
-	0xF2, 0xE2, 0xFE, 0xF4, 0x5F, 0xFF, 0x78, 0x28,
-	0xE2, 0xFD, 0xEE, 0x5D, 0x4F, 0xF2, 0x78, 0x28,
-	0xE2, 0xFF, 0x78, 0x26, 0xE2, 0xFD, 0xC3, 0x74,
-	0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x7B,
-	0xFE, 0x74, 0x2A, 0x2D, 0xF9, 0x74, 0x80, 0x3C,
-	0xFA, 0xEF, 0x12, 0x1F, 0xEA, 0xE2, 0x04, 0xF2,
-	0x80, 0x98, 0x78, 0x2A, 0x12, 0x44, 0xE5, 0x90,
-	0x85, 0xBB, 0x12, 0x20, 0xCE, 0x78, 0x24, 0xE2,
-	0xFE, 0x08, 0xE2, 0xFF, 0x12, 0x2E, 0xA2, 0x22,
-	0x22, 0x90, 0x81, 0xCB, 0x12, 0x45, 0x1F, 0x90,
-	0x00, 0x01, 0x12, 0x1F, 0xBD, 0xFF, 0xFE, 0x12,
-	0x1F, 0xA4, 0xFD, 0xC3, 0x13, 0x30, 0xE0, 0x12,
-	0x90, 0x81, 0xCB, 0x12, 0x45, 0x16, 0x90, 0x00,
-	0x02, 0x12, 0x1F, 0xBD, 0x90, 0x81, 0xCF, 0xF0,
-	0x80, 0x05, 0x90, 0x81, 0xCF, 0xEF, 0xF0, 0x90,
-	0x81, 0xCE, 0xEE, 0xF0, 0x90, 0x81, 0xCF, 0xE0,
-	0xFE, 0x90, 0x81, 0xCE, 0xE0, 0xFF, 0xD3, 0x9E,
-	0x50, 0x38, 0x90, 0x81, 0xCB, 0x12, 0x45, 0x16,
-	0x12, 0x1F, 0xA4, 0x54, 0x01, 0xFE, 0x74, 0xDE,
-	0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x80, 0xF5, 0x83,
-	0xEE, 0xF0, 0x74, 0xDE, 0x2F, 0xF5, 0x82, 0xE4,
-	0x34, 0x80, 0xF5, 0x83, 0xE0, 0x70, 0x04, 0xD1,
-	0x25, 0x80, 0x07, 0x90, 0x81, 0xCE, 0xE0, 0xFF,
-	0xB1, 0x80, 0x90, 0x81, 0xCE, 0xE0, 0x04, 0xF0,
-	0x80, 0xBA, 0x90, 0x80, 0xDE, 0xE0, 0x70, 0x24,
-	0x90, 0x81, 0x2A, 0xE0, 0x70, 0x04, 0xFF, 0x12,
-	0x49, 0x93, 0x90, 0x81, 0x2A, 0xE0, 0x64, 0x0C,
-	0x60, 0x02, 0xD1, 0x26, 0x90, 0x81, 0x24, 0xE0,
-	0x54, 0xF7, 0xF0, 0x54, 0xEF, 0xF0, 0x54, 0xBF,
-	0xF0, 0x54, 0x7F, 0xF0, 0x22, 0x22, 0x90, 0x06,
-	0x04, 0xE0, 0x54, 0x7F, 0xF0, 0x90, 0x05, 0x22,
-	0xE4, 0xF0, 0x90, 0x81, 0x2A, 0x74, 0x0C, 0xF0,
-	0x22, 0x90, 0x81, 0xED, 0xEF, 0xF0, 0xA3, 0xED,
-	0xF0, 0xAD, 0x03, 0xAC, 0x02, 0xE4, 0x90, 0x81,
-	0xF5, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0xC4, 0x74,
-	0x39, 0xF0, 0x74, 0x66, 0xA3, 0xF0, 0xEC, 0x54,
-	0x3F, 0xFC, 0x90, 0x01, 0x40, 0xED, 0xF0, 0xAE,
-	0x04, 0xEE, 0xA3, 0xF0, 0x90, 0x81, 0xED, 0xE0,
-	0x24, 0x81, 0x60, 0x34, 0x24, 0xDA, 0x60, 0x1C,
-	0x24, 0x3C, 0x70, 0x41, 0x90, 0x81, 0xEE, 0xE0,
-	0xC4, 0x33, 0x33, 0x33, 0x54, 0x80, 0x90, 0x81,
-	0xF2, 0xF0, 0xA3, 0x74, 0x69, 0xF0, 0xA3, 0x74,
-	0x80, 0xF0, 0x80, 0x2C, 0x90, 0x81, 0xEE, 0xE0,
-	0x54, 0x01, 0x90, 0x81, 0xF2, 0xF0, 0xA3, 0x74,
-	0xA5, 0xF0, 0xA3, 0x74, 0x01, 0xF0, 0x80, 0x18,
-	0x90, 0x81, 0xEE, 0xE0, 0xC4, 0x54, 0x10, 0x90,
-	0x81, 0xF2, 0xF0, 0xA3, 0x74, 0x7F, 0xF0, 0xA3,
-	0x74, 0x10, 0xF0, 0x80, 0x03, 0x7F, 0x00, 0x22,
-	0x90, 0x81, 0xF3, 0xE0, 0x90, 0x01, 0x06, 0xF0,
-	0x90, 0x81, 0xF2, 0xE0, 0x60, 0x0E, 0x90, 0x01,
-	0x42, 0xF0, 0x90, 0x81, 0xF1, 0xE0, 0x90, 0x01,
-	0x43, 0xF0, 0x80, 0x0D, 0x90, 0x01, 0x43, 0xE4,
-	0xF0, 0x90, 0x81, 0xF2, 0xE0, 0x90, 0x01, 0x42,
-	0xF0, 0x90, 0x81, 0xF4, 0xE0, 0xFF, 0x90, 0x01,
-	0x42, 0xE0, 0x5F, 0xFF, 0x90, 0x81, 0xF2, 0xE0,
-	0x6F, 0x60, 0xEE, 0x74, 0x39, 0x04, 0x90, 0x01,
-	0xC4, 0xF0, 0x74, 0x66, 0xA3, 0xF0, 0x90, 0x01,
-	0x43, 0xE4, 0xF0, 0x7F, 0x01, 0x22, 0xE4, 0x90,
-	0x81, 0x6A, 0xF0, 0x90, 0x87, 0x5F, 0xE0, 0x90,
-	0x81, 0x69, 0xF0, 0xE4, 0x90, 0x81, 0x76, 0xF0,
-	0x90, 0x81, 0x66, 0xF0, 0x90, 0x81, 0x66, 0xE0,
-	0xFF, 0xC3, 0x94, 0x40, 0x50, 0x15, 0x74, 0x79,
-	0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x81, 0xF5, 0x83,
-	0x74, 0xFF, 0xF0, 0x90, 0x81, 0x66, 0xE0, 0x04,
-	0xF0, 0x80, 0xE1, 0xE4, 0x90, 0x81, 0x66, 0xF0,
-	0x90, 0x81, 0x69, 0xE0, 0xFF, 0x90, 0x81, 0x66,
-	0xE0, 0xFE, 0xC3, 0x9F, 0x40, 0x03, 0x02, 0x68,
-	0x12, 0x74, 0xDF, 0x2E, 0xF9, 0xE4, 0x34, 0x86,
-	0x75, 0x13, 0x01, 0xF5, 0x14, 0x89, 0x15, 0x75,
-	0x16, 0x0A, 0x7B, 0x01, 0x7A, 0x81, 0x79, 0x5B,
-	0x12, 0x2B, 0xED, 0x90, 0x81, 0x5C, 0xE0, 0xFF,
-	0x12, 0x2F, 0x27, 0xEF, 0x04, 0x90, 0x81, 0x76,
-	0xF0, 0x90, 0x81, 0x5B, 0xE0, 0xFF, 0xA3, 0xE0,
-	0xFD, 0x12, 0x31, 0xEA, 0xEF, 0x24, 0xC8, 0x90,
-	0x81, 0x78, 0xF0, 0x75, 0xF0, 0x08, 0xA4, 0xF0,
-	0x90, 0x81, 0x5C, 0xE0, 0x54, 0x0F, 0x90, 0x81,
-	0x77, 0xF0, 0xE4, 0x90, 0x81, 0x65, 0xF0, 0x90,
-	0x81, 0x67, 0xF0, 0x90, 0x81, 0x67, 0xE0, 0xFF,
-	0xC3, 0x94, 0x04, 0x50, 0x57, 0x90, 0x81, 0x77,
-	0xE0, 0xFE, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3,
-	0x13, 0xD8, 0xFC, 0x20, 0xE0, 0x3E, 0x90, 0x81,
-	0x67, 0xE0, 0x25, 0xE0, 0xFF, 0x90, 0x81, 0x78,
-	0xE0, 0x2F, 0x24, 0x79, 0xF9, 0xE4, 0x34, 0x81,
-	0xFA, 0x7B, 0x01, 0xC0, 0x03, 0xC0, 0x01, 0x90,
-	0x81, 0x65, 0xE0, 0x75, 0xF0, 0x02, 0xA4, 0x24,
-	0x5D, 0xF9, 0x74, 0x81, 0x35, 0xF0, 0x8B, 0x13,
-	0xF5, 0x14, 0x89, 0x15, 0x75, 0x16, 0x02, 0xD0,
-	0x01, 0xD0, 0x03, 0x12, 0x2B, 0xED, 0x90, 0x81,
-	0x65, 0xE0, 0x04, 0xF0, 0x90, 0x81, 0x67, 0xE0,
-	0x04, 0xF0, 0x80, 0x9F, 0x90, 0x81, 0x76, 0xE0,
-	0xFF, 0x90, 0x81, 0x66, 0xE0, 0x2F, 0xF0, 0x02,
-	0x67, 0x40, 0xE4, 0x90, 0x81, 0x6A, 0xF0, 0x90,
-	0x81, 0x6A, 0xE0, 0xC3, 0x94, 0x40, 0x40, 0x02,
-	0x41, 0xAF, 0xE0, 0xFF, 0x24, 0x79, 0xF5, 0x82,
-	0xE4, 0x34, 0x81, 0xF5, 0x83, 0xE0, 0x90, 0x81,
-	0x6C, 0xF0, 0xE0, 0xFE, 0x54, 0xF0, 0xC4, 0x54,
-	0x0F, 0xFD, 0x90, 0x81, 0x6B, 0xF0, 0xEE, 0x54,
-	0x0F, 0xFE, 0xA3, 0xF0, 0x74, 0x7A, 0x2F, 0xF5,
-	0x82, 0xE4, 0x34, 0x81, 0xF5, 0x83, 0xE0, 0x90,
-	0x81, 0x6D, 0xF0, 0xFC, 0xEE, 0xFE, 0xEC, 0xFB,
-	0xEB, 0xFF, 0x90, 0x81, 0x72, 0xEE, 0xF0, 0xA3,
-	0xEF, 0xF0, 0xED, 0x12, 0x45, 0x28, 0x68, 0x8B,
-	0x00, 0x68, 0xC2, 0x01, 0x69, 0x73, 0x02, 0x6A,
-	0xA0, 0x03, 0x69, 0x8E, 0x04, 0x69, 0xAF, 0x05,
-	0x69, 0xAF, 0x06, 0x69, 0xAF, 0x07, 0x69, 0xAF,
-	0x08, 0x6A, 0x33, 0x09, 0x6A, 0x69, 0x0A, 0x00,
-	0x00, 0x6A, 0xAF, 0x90, 0x81, 0x6A, 0xE0, 0xFD,
-	0x24, 0x7C, 0xF5, 0x82, 0xE4, 0x34, 0x81, 0xF5,
-	0x83, 0xE0, 0xFE, 0x74, 0x7B, 0x2D, 0xF5, 0x82,
-	0xE4, 0x34, 0x81, 0xF5, 0x83, 0xE0, 0xFD, 0xED,
-	0xFF, 0x90, 0x81, 0x74, 0xEE, 0xF0, 0xFC, 0xA3,
-	0xEF, 0xF0, 0x90, 0x81, 0x6D, 0xE0, 0xFF, 0x12,
-	0x2F, 0x96, 0x90, 0x81, 0x68, 0x74, 0x02, 0xF0,
-	0x41, 0xA0, 0x90, 0x81, 0x6A, 0xE0, 0x24, 0x7C,
-	0xF5, 0x82, 0xE4, 0x34, 0x81, 0xF5, 0x83, 0xE0,
-	0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x08, 0x12,
-	0x20, 0xBB, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06,
-	0xAB, 0x07, 0x90, 0x81, 0x6A, 0xE0, 0x24, 0x7B,
-	0xF5, 0x82, 0xE4, 0x34, 0x81, 0xF5, 0x83, 0xE0,
-	0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x12, 0x44, 0xCC,
-	0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07,
-	0x90, 0x81, 0x6A, 0xE0, 0x24, 0x7D, 0xF5, 0x82,
-	0xE4, 0x34, 0x81, 0xF5, 0x83, 0xE0, 0xFF, 0xE4,
-	0xFC, 0xFD, 0xFE, 0x78, 0x10, 0x12, 0x20, 0xBB,
-	0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00,
-	0x12, 0x44, 0xCC, 0xC0, 0x04, 0xC0, 0x05, 0xC0,
-	0x06, 0xC0, 0x07, 0x90, 0x81, 0x6A, 0xE0, 0x24,
-	0x7E, 0xF5, 0x82, 0xE4, 0x34, 0x81, 0xF5, 0x83,
-	0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x18,
-	0x12, 0x20, 0xBB, 0xD0, 0x03, 0xD0, 0x02, 0xD0,
-	0x01, 0xD0, 0x00, 0x12, 0x44, 0xCC, 0x90, 0x81,
-	0x6E, 0x12, 0x20, 0xCE, 0x90, 0x81, 0x6E, 0x12,
-	0x44, 0xD9, 0x90, 0x85, 0x96, 0x12, 0x20, 0xCE,
-	0x90, 0x81, 0x72, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF,
-	0x12, 0x2E, 0xE4, 0x90, 0x81, 0x68, 0x74, 0x04,
-	0xF0, 0x41, 0xA0, 0x90, 0x81, 0x6D, 0xE0, 0xFD,
-	0x90, 0x81, 0x6A, 0xE0, 0x24, 0x7B, 0xF5, 0x82,
-	0xE4, 0x34, 0x81, 0xF5, 0x83, 0xE0, 0xFB, 0xE4,
-	0xFF, 0x12, 0x30, 0xC7, 0x80, 0x19, 0x90, 0x81,
-	0x6D, 0xE0, 0xFD, 0x90, 0x81, 0x6A, 0xE0, 0x24,
-	0x7B, 0xF5, 0x82, 0xE4, 0x34, 0x81, 0xF5, 0x83,
-	0xE0, 0xFB, 0xE4, 0xFF, 0x12, 0x30, 0x6A, 0x90,
-	0x81, 0x68, 0x74, 0x01, 0xF0, 0x41, 0xA0, 0x90,
-	0x81, 0x68, 0x74, 0x02, 0xF0, 0x90, 0x81, 0x6A,
-	0xE0, 0x24, 0x7C, 0xF5, 0x82, 0xE4, 0x34, 0x81,
-	0xF5, 0x83, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE,
-	0x78, 0x08, 0x12, 0x20, 0xBB, 0xA8, 0x04, 0xA9,
-	0x05, 0xAA, 0x06, 0xAB, 0x07, 0x90, 0x81, 0x6A,
-	0xE0, 0x24, 0x7B, 0xF5, 0x82, 0xE4, 0x34, 0x81,
-	0xF5, 0x83, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE,
-	0x12, 0x44, 0xCC, 0xC0, 0x04, 0xC0, 0x05, 0xC0,
-	0x06, 0xC0, 0x07, 0x90, 0x81, 0x6C, 0xE0, 0xFF,
-	0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x10, 0x12, 0x20,
-	0xBB, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0,
-	0x00, 0x12, 0x44, 0xCC, 0x90, 0x81, 0x6E, 0x12,
-	0x20, 0xCE, 0x90, 0x81, 0x6B, 0xE0, 0x24, 0xFB,
-	0xFF, 0xC0, 0x07, 0x90, 0x81, 0x6E, 0x12, 0x44,
-	0xD9, 0x90, 0x81, 0xF9, 0x12, 0x20, 0xCE, 0x90,
-	0x81, 0x6D, 0xE0, 0xFD, 0xD0, 0x07, 0x12, 0x55,
-	0x1C, 0x80, 0x6D, 0x90, 0x81, 0x68, 0x74, 0x01,
-	0xF0, 0x90, 0x81, 0x6A, 0xE0, 0x24, 0x7B, 0xF9,
-	0xE4, 0x34, 0x81, 0x75, 0x13, 0x01, 0xF5, 0x14,
-	0x89, 0x15, 0x75, 0x16, 0x01, 0x7B, 0xFE, 0x7A,
-	0x80, 0x79, 0x33, 0x12, 0x2B, 0xED, 0x90, 0x81,
-	0x6D, 0xE0, 0xFF, 0x90, 0x81, 0x6C, 0xE0, 0xFD,
-	0xE4, 0x90, 0x81, 0xBC, 0xF0, 0x7B, 0x04, 0x80,
-	0x34, 0x90, 0x81, 0x68, 0x74, 0x04, 0xF0, 0x90,
-	0x81, 0x6A, 0xE0, 0x24, 0x7B, 0xF9, 0xE4, 0x34,
-	0x81, 0x75, 0x13, 0x01, 0xF5, 0x14, 0x89, 0x15,
-	0x75, 0x16, 0x04, 0x7B, 0xFE, 0x7A, 0x80, 0x79,
-	0x33, 0x12, 0x2B, 0xED, 0x90, 0x81, 0x6D, 0xE0,
-	0xFF, 0x90, 0x81, 0x6C, 0xE0, 0xFD, 0xE4, 0x90,
-	0x81, 0xBC, 0xF0, 0x7B, 0x06, 0x12, 0x63, 0xE1,
-	0x90, 0x81, 0x68, 0xE0, 0x24, 0x02, 0xFF, 0x90,
-	0x81, 0x6A, 0xE0, 0x2F, 0xF0, 0x01, 0x17, 0x22,
-	0x90, 0x02, 0x09, 0xE0, 0xFD, 0x12, 0x1F, 0xA4,
-	0xFE, 0xAF, 0x05, 0xED, 0x2E, 0x90, 0x80, 0x3D,
-	0xF0, 0x90, 0x00, 0x01, 0x12, 0x1F, 0xBD, 0xFF,
-	0xED, 0x2F, 0x90, 0x80, 0x3E, 0xF0, 0x90, 0x00,
-	0x02, 0x12, 0x1F, 0xBD, 0xFF, 0xED, 0x2F, 0x90,
-	0x80, 0x3F, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x1F,
-	0xBD, 0xFF, 0xED, 0x2F, 0x90, 0x80, 0x40, 0xF0,
-	0x90, 0x00, 0x04, 0x12, 0x1F, 0xBD, 0xFF, 0xAE,
-	0x05, 0xED, 0x2F, 0x90, 0x80, 0x41, 0xF0, 0x22,
-	0x90, 0x00, 0x02, 0x12, 0x1F, 0xBD, 0xFF, 0x30,
-	0xE0, 0x26, 0x12, 0x1F, 0xA4, 0x90, 0x81, 0x38,
-	0xF0, 0x90, 0x00, 0x01, 0x12, 0x1F, 0xBD, 0x90,
-	0x81, 0x39, 0xF0, 0xEF, 0x54, 0xFE, 0xFF, 0xA3,
-	0xE0, 0x54, 0x01, 0x4F, 0xF0, 0x90, 0x00, 0x03,
-	0x12, 0x1F, 0xBD, 0x90, 0x81, 0x3B, 0xF0, 0x22,
-	0x90, 0x81, 0x38, 0x74, 0x01, 0xF0, 0xA3, 0x74,
-	0x05, 0xF0, 0xA3, 0xE0, 0x54, 0x01, 0x44, 0x28,
-	0xF0, 0xA3, 0x74, 0x05, 0xF0, 0x22, 0x12, 0x1F,
-	0xA4, 0x90, 0x81, 0x3E, 0xF0, 0x90, 0x81, 0x3E,
-	0xE0, 0x90, 0x01, 0xE7, 0xF0, 0x22, 0x12, 0x1F,
-	0xA4, 0x90, 0x81, 0x4A, 0xF0, 0x90, 0x00, 0x01,
-	0x12, 0x1F, 0xBD, 0x90, 0x81, 0x4B, 0xF0, 0x22,
-	0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90,
-	0x81, 0xFD, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4,
-	0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x81, 0xFD, 0xE0,
-	0xFE, 0xA3, 0xE0, 0xF5, 0x82, 0x8E, 0x83, 0xE0,
-	0x60, 0x2D, 0xC3, 0x90, 0x82, 0x00, 0xE0, 0x94,
-	0xE8, 0x90, 0x81, 0xFF, 0xE0, 0x94, 0x03, 0x40,
-	0x0B, 0x90, 0x01, 0xC0, 0xE0, 0x44, 0x80, 0xF0,
-	0x7F, 0x00, 0x80, 0x15, 0x90, 0x81, 0xFF, 0xE4,
-	0x75, 0xF0, 0x01, 0x12, 0x44, 0xA9, 0x7F, 0x0A,
-	0x7E, 0x00, 0x12, 0x32, 0xAA, 0x80, 0xC5, 0x7F,
-	0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
-	0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x81, 0xD1,
-	0x12, 0x45, 0x1F, 0x90, 0x82, 0x0A, 0xE0, 0xFF,
-	0x04, 0xF0, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x1F,
-	0xFC, 0x7F, 0xAF, 0x7E, 0x01, 0x71, 0x60, 0xEF,
-	0x60, 0x3A, 0x90, 0x81, 0xD1, 0x12, 0x45, 0x16,
-	0x8B, 0x13, 0x8A, 0x14, 0x89, 0x15, 0x90, 0x00,
-	0x0E, 0x12, 0x1F, 0xBD, 0x24, 0x02, 0xF5, 0x16,
-	0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA0, 0x12, 0x2B,
-	0xED, 0x90, 0x81, 0xD1, 0x12, 0x45, 0x16, 0x90,
-	0x00, 0x0E, 0x12, 0x1F, 0xBD, 0x90, 0x01, 0xAE,
-	0xF0, 0xA3, 0x74, 0xFF, 0xF0, 0x90, 0x01, 0xCB,
-	0xE0, 0x64, 0x80, 0xF0, 0xD0, 0xD0, 0x92, 0xAF,
-	0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
-	0xE4, 0xFF, 0x90, 0x80, 0xD9, 0xE0, 0xFE, 0x90,
-	0x80, 0xD8, 0xE0, 0xFD, 0xB5, 0x06, 0x04, 0x7E,
-	0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x64, 0x01,
-	0x60, 0x32, 0x90, 0x01, 0xAF, 0xE0, 0x70, 0x13,
-	0xED, 0x75, 0xF0, 0x0F, 0xA4, 0x24, 0x42, 0xF9,
-	0x74, 0x80, 0x35, 0xF0, 0xFA, 0x7B, 0x01, 0x71,
-	0xB6, 0x7F, 0x01, 0xEF, 0x60, 0x16, 0x90, 0x80,
-	0xD8, 0xE0, 0x04, 0xF0, 0xE0, 0x7F, 0x00, 0xB4,
-	0x0A, 0x02, 0x7F, 0x01, 0xEF, 0x60, 0x05, 0xE4,
-	0x90, 0x80, 0xD8, 0xF0, 0xD0, 0xD0, 0x92, 0xAF,
-	0x22, 0x8F, 0x0D, 0x22, 0x8F, 0x0E, 0x22, 0x22,
-	0x90, 0x01, 0x34, 0xE0, 0x55, 0x3D, 0xF5, 0x41,
-	0xA3, 0xE0, 0x55, 0x3E, 0xF5, 0x42, 0xA3, 0xE0,
-	0x55, 0x3F, 0xF5, 0x43, 0xA3, 0xE0, 0x55, 0x40,
-	0xF5, 0x44, 0x90, 0x01, 0x34, 0xE5, 0x41, 0xF0,
-	0xA3, 0xE5, 0x42, 0xF0, 0xA3, 0xE5, 0x43, 0xF0,
-	0xA3, 0xE5, 0x44, 0xF0, 0x22, 0x90, 0x01, 0x3C,
-	0xE0, 0x55, 0x45, 0xF5, 0x49, 0xA3, 0xE0, 0x55,
-	0x46, 0xF5, 0x4A, 0xA3, 0xE0, 0x55, 0x47, 0xF5,
-	0x4B, 0xA3, 0xE0, 0x55, 0x48, 0xF5, 0x4C, 0x90,
-	0x01, 0x3C, 0xE5, 0x49, 0xF0, 0xA3, 0xE5, 0x4A,
-	0xF0, 0xA3, 0xE5, 0x4B, 0xF0, 0xA3, 0xE5, 0x4C,
-	0xF0, 0x53, 0x91, 0xDF, 0x22, 0x90, 0x81, 0x1F,
-	0xE0, 0x30, 0xE0, 0x05, 0xE4, 0xA3, 0xF0, 0xA3,
-	0xF0, 0x22, 0x90, 0x80, 0xDE, 0xE0, 0x64, 0x01,
-	0x70, 0x19, 0x90, 0x81, 0x27, 0xE0, 0x60, 0x13,
-	0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C,
-	0x74, 0x02, 0x12, 0x4F, 0xF4, 0x90, 0x01, 0x57,
-	0x74, 0x05, 0xF0, 0x22, 0x90, 0x80, 0xDE, 0xE0,
-	0x64, 0x01, 0x70, 0x26, 0x90, 0x81, 0x27, 0xE0,
-	0x60, 0x20, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90,
-	0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x81, 0x24,
-	0xE0, 0x54, 0xFB, 0xF0, 0x90, 0x81, 0x2B, 0xE0,
-	0x54, 0xFD, 0xF0, 0x54, 0x07, 0x70, 0x03, 0x12,
-	0x47, 0x2A, 0x22, 0x90, 0x80, 0xDE, 0xE0, 0xB4,
-	0x01, 0x14, 0x90, 0x81, 0x27, 0xE0, 0x60, 0x0E,
-	0x90, 0x81, 0x26, 0xE0, 0x54, 0x0F, 0x64, 0x02,
-	0x60, 0x02, 0x80, 0x03, 0xD1, 0x7F, 0x22, 0x90,
-	0x04, 0x1D, 0xE0, 0x70, 0x13, 0x90, 0x80, 0x3E,
-	0xE0, 0xFF, 0xE4, 0xFD, 0xB1, 0x69, 0x8E, 0x4E,
-	0x8F, 0x4F, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0,
-	0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
-	0x90, 0x82, 0x0E, 0xED, 0xF0, 0x90, 0x82, 0x0D,
-	0xEF, 0xF0, 0xE4, 0xFD, 0xFC, 0xF1, 0x37, 0x7C,
-	0x00, 0xAD, 0x07, 0x90, 0x82, 0x0D, 0xE0, 0x90,
-	0x04, 0x25, 0xF0, 0x90, 0x82, 0x0E, 0xE0, 0x60,
-	0x0E, 0x74, 0x0F, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
-	0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0xAF,
-	0x05, 0x74, 0x08, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
-	0xFC, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x09, 0x2F,
-	0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0,
-	0x54, 0xF0, 0xF0, 0x74, 0x21, 0x2D, 0xF5, 0x82,
-	0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xF7,
-	0xF0, 0xAE, 0x04, 0xAF, 0x05, 0xD0, 0xD0, 0x92,
-	0xAF, 0x22, 0x8F, 0x4E, 0xF1, 0x4B, 0xBF, 0x01,
-	0x18, 0x90, 0x80, 0x40, 0xE0, 0xFF, 0x7D, 0x01,
-	0xB1, 0x69, 0xAD, 0x07, 0xAC, 0x06, 0xAF, 0x4E,
-	0x12, 0x4F, 0x82, 0x90, 0x04, 0x1F, 0x74, 0x20,
-	0xF0, 0x22, 0x90, 0x06, 0xA9, 0xE0, 0x90, 0x81,
-	0x4C, 0xF0, 0xE0, 0xFD, 0x54, 0xC0, 0x70, 0x09,
-	0x90, 0x81, 0x2B, 0xE0, 0x54, 0xFE, 0xF0, 0x80,
-	0x72, 0xED, 0x30, 0xE6, 0x4B, 0x90, 0x81, 0x27,
-	0xE0, 0x64, 0x02, 0x70, 0x2A, 0x90, 0x81, 0x24,
-	0xE0, 0xFF, 0xC3, 0x13, 0x20, 0xE0, 0x09, 0x90,
-	0x81, 0x2B, 0xE0, 0x44, 0x01, 0xF0, 0x80, 0x28,
-	0x90, 0x81, 0x26, 0xE0, 0x54, 0x0F, 0x64, 0x01,
-	0x70, 0x2D, 0x90, 0x81, 0x2B, 0xE0, 0x44, 0x04,
-	0xF0, 0x7F, 0x01, 0xB1, 0xD2, 0x80, 0x20, 0x90,
-	0x81, 0x2B, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x81,
-	0x26, 0xE0, 0x54, 0x0F, 0x64, 0x02, 0x60, 0x04,
-	0xB1, 0x4F, 0x80, 0x0B, 0xD1, 0x7F, 0x80, 0x07,
-	0x90, 0x81, 0x2B, 0xE0, 0x54, 0xFE, 0xF0, 0x90,
-	0x81, 0x4C, 0xE0, 0x90, 0x81, 0x2B, 0x30, 0xE7,
-	0x11, 0x12, 0x4F, 0xF1, 0x90, 0x01, 0x57, 0x74,
-	0x05, 0xF0, 0x90, 0x81, 0x24, 0xE0, 0x44, 0x04,
-	0xF0, 0x22, 0xE0, 0x54, 0xFD, 0xF0, 0x22, 0x90,
-	0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74,
-	0x08, 0xF0, 0xE4, 0xF5, 0x1D, 0x90, 0x81, 0x3A,
-	0xE0, 0xC3, 0x13, 0x54, 0x7F, 0xF5, 0x1E, 0xE4,
-	0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x50,
-	0x05, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90,
-	0x06, 0x92, 0x74, 0x02, 0xF0, 0x90, 0x81, 0x24,
-	0xE0, 0x44, 0x10, 0xF0, 0x90, 0x81, 0x2A, 0xE0,
-	0x64, 0x0C, 0x60, 0x0C, 0xE4, 0xFD, 0x7F, 0x0C,
-	0x12, 0x47, 0x3D, 0xE4, 0xFF, 0x12, 0x4F, 0x0D,
-	0x22, 0xE4, 0x90, 0x81, 0x4C, 0xF0, 0x90, 0x06,
-	0xA9, 0xE0, 0x90, 0x81, 0x4C, 0xF0, 0xE0, 0x54,
-	0xC0, 0x70, 0x0D, 0x90, 0x81, 0x2B, 0xE0, 0x54,
-	0xFE, 0xF0, 0x54, 0xFD, 0xF0, 0x02, 0x47, 0x2A,
-	0x90, 0x81, 0x4C, 0xE0, 0x30, 0xE6, 0x21, 0x90,
-	0x81, 0x27, 0xE0, 0x64, 0x01, 0x70, 0x20, 0x90,
-	0x81, 0x2B, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x81,
-	0x26, 0xE0, 0x54, 0x0F, 0x64, 0x02, 0x60, 0x04,
-	0xB1, 0x4F, 0x80, 0x0B, 0xD1, 0x7F, 0x80, 0x07,
-	0x90, 0x81, 0x2B, 0xE0, 0x54, 0xFE, 0xF0, 0x90,
-	0x81, 0x4C, 0xE0, 0x90, 0x81, 0x2B, 0x30, 0xE7,
-	0x11, 0x12, 0x4F, 0xF1, 0x90, 0x01, 0x57, 0x74,
-	0x05, 0xF0, 0x90, 0x81, 0x24, 0xE0, 0x44, 0x04,
-	0xF0, 0x22, 0xE0, 0x54, 0xFD, 0xF0, 0x22, 0xE4,
-	0xFE, 0xEF, 0xC3, 0x13, 0xFD, 0xEF, 0x30, 0xE0,
-	0x02, 0x7E, 0x80, 0x90, 0xFD, 0x10, 0xED, 0xF0,
-	0xAF, 0x06, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3,
-	0xC0, 0xD0, 0x90, 0x04, 0x1D, 0xE0, 0x60, 0x1A,
-	0x90, 0x05, 0x22, 0xE0, 0x54, 0x90, 0x60, 0x07,
-	0x90, 0x01, 0xC0, 0xE0, 0x44, 0x08, 0xF0, 0x90,
-	0x01, 0xC6, 0xE0, 0x30, 0xE1, 0xE4, 0x7F, 0x00,
-	0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF,
-	0x22, 0x90, 0x81, 0x27, 0xE0, 0x60, 0x03, 0x12,
-	0x73, 0xE1, 0x90, 0x81, 0x3F, 0xE0, 0x30, 0xE0,
-	0x03, 0x12, 0x49, 0xDD, 0x22, 0x90, 0x81, 0x27,
-	0xE0, 0x60, 0x35, 0x90, 0x06, 0x92, 0xE0, 0x30,
-	0xE1, 0x24, 0xE4, 0xF5, 0x1D, 0x90, 0x81, 0x3A,
-	0xE0, 0xC3, 0x13, 0x54, 0x7F, 0xF5, 0x1E, 0xE4,
-	0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x50,
-	0x05, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90,
-	0x06, 0x92, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x81,
-	0x24, 0xE0, 0x54, 0xEF, 0xF0, 0x12, 0x47, 0x2A,
-	0x22, 0x12, 0x71, 0x48, 0x90, 0x81, 0x4D, 0xEF,
-	0xF0, 0x90, 0x81, 0x24, 0x30, 0xE0, 0x06, 0xE0,
-	0x44, 0x01, 0xF0, 0x80, 0x04, 0xE0, 0x54, 0xFE,
-	0xF0, 0x90, 0x81, 0x4D, 0xE0, 0x30, 0xE6, 0x11,
-	0x90, 0x01, 0x2F, 0xE0, 0x30, 0xE7, 0x04, 0xE4,
-	0xF0, 0x80, 0x06, 0x90, 0x01, 0x2F, 0x74, 0x80,
-	0xF0, 0x90, 0x81, 0x24, 0xE0, 0x30, 0xE0, 0x1A,
-	0x90, 0x81, 0x32, 0xE4, 0xF0, 0xA3, 0x74, 0x07,
-	0xF0, 0x90, 0x81, 0x32, 0xA3, 0xE0, 0x90, 0x05,
-	0x58, 0xF0, 0x90, 0x04, 0xEC, 0xE0, 0x54, 0xDD,
-	0xF0, 0x22, 0x90, 0x04, 0xEC, 0xE0, 0x44, 0x22,
-	0xF0, 0x22, 0x90, 0x81, 0x4A, 0xE0, 0x60, 0x0F,
-	0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x01,
-	0xF0, 0x90, 0x05, 0xFD, 0xE0, 0x04, 0xF0, 0x22,
-	0x90, 0x81, 0x24, 0xE0, 0xFF, 0xC4, 0x13, 0x13,
-	0x54, 0x03, 0x30, 0xE0, 0x27, 0xEF, 0x54, 0xBF,
-	0xF0, 0x90, 0x04, 0xE0, 0xE0, 0x90, 0x81, 0x25,
-	0x30, 0xE0, 0x06, 0xE0, 0x44, 0x01, 0xF0, 0x80,
-	0x10, 0xE0, 0x54, 0xFE, 0xF0, 0x90, 0x01, 0xB9,
-	0x74, 0x01, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x04,
-	0xF0, 0x12, 0x47, 0x2A, 0xE4, 0xFF, 0x90, 0x81,
-	0x45, 0xE0, 0x30, 0xE0, 0x48, 0x90, 0x81, 0x49,
-	0xE0, 0xFD, 0x60, 0x41, 0x74, 0x01, 0x7E, 0x00,
-	0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE,
-	0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x04, 0xE0,
-	0xE0, 0xFB, 0xEF, 0x5B, 0x60, 0x06, 0xE4, 0x90,
-	0x81, 0x49, 0xF0, 0x22, 0x90, 0x81, 0x47, 0xE0,
-	0xD3, 0x9D, 0x50, 0x10, 0x90, 0x01, 0xC7, 0x74,
-	0x10, 0xF0, 0x11, 0xBE, 0x90, 0x81, 0x45, 0xE0,
-	0x54, 0xFE, 0xF0, 0x22, 0x12, 0x4F, 0x0B, 0x90,
-	0x81, 0x49, 0xE0, 0x04, 0xF0, 0x22, 0x90, 0x80,
-	0x3C, 0xE0, 0x64, 0x02, 0x60, 0x07, 0x90, 0x06,
-	0x90, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0x90, 0x81,
-	0x24, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x13, 0x54,
-	0x01, 0x30, 0xE0, 0x2C, 0xEF, 0x54, 0x7F, 0xF0,
-	0x90, 0x04, 0xE0, 0xE0, 0x90, 0x81, 0x25, 0x30,
-	0xE1, 0x06, 0xE0, 0x44, 0x02, 0xF0, 0x80, 0x0F,
-	0xE0, 0x54, 0xFD, 0xF0, 0x90, 0x01, 0xB9, 0x74,
-	0x01, 0xF0, 0x90, 0x01, 0xB8, 0x04, 0xF0, 0x90,
-	0x81, 0x27, 0xE0, 0x60, 0x03, 0x12, 0x47, 0x2A,
-	0x7F, 0x01, 0x01, 0x6E, 0xC3, 0xEE, 0x94, 0x01,
-	0x40, 0x0A, 0x0D, 0xED, 0x13, 0x90, 0xFD, 0x10,
-	0xF0, 0xE4, 0x2F, 0xFF, 0x22, 0xC3, 0xEE, 0x94,
-	0x01, 0x40, 0x24, 0x90, 0xFD, 0x11, 0xE0, 0x6D,
-	0x70, 0x1A, 0x90, 0x01, 0x17, 0xE0, 0xB5, 0x05,
-	0x0D, 0x90, 0x01, 0xE4, 0x74, 0x77, 0xF0, 0x90,
-	0xFD, 0x11, 0xE4, 0xF0, 0x80, 0x06, 0xED, 0x04,
-	0x90, 0xFD, 0x11, 0xF0, 0xE4, 0x2F, 0xFF, 0x22,
-	0xE4, 0x90, 0x81, 0x4E, 0xF0, 0xA3, 0xF0, 0xA3,
-	0xF0, 0x90, 0x00, 0x83, 0xE0, 0x90, 0x81, 0x4E,
-	0xF0, 0x90, 0x00, 0x83, 0xE0, 0xFE, 0x90, 0x81,
-	0x4E, 0xE0, 0xFF, 0xB5, 0x06, 0x01, 0x22, 0xC3,
-	0x90, 0x81, 0x50, 0xE0, 0x94, 0x64, 0x90, 0x81,
-	0x4F, 0xE0, 0x94, 0x00, 0x40, 0x0D, 0x90, 0x01,
-	0xC0, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x81, 0x4E,
-	0xE0, 0xFF, 0x22, 0x90, 0x81, 0x4F, 0xE4, 0x75,
-	0xF0, 0x01, 0x12, 0x44, 0xA9, 0x80, 0xC2, 0x74,
-	0x45, 0x2F, 0xF8, 0xE6, 0xFE, 0xED, 0xF4, 0x5E,
-	0xFE, 0xF6, 0x74, 0x38, 0x2F, 0xF5, 0x82, 0xE4,
-	0x34, 0x01, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xD3,
-	0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x82,
-	0x12, 0xED, 0xF0, 0x90, 0x82, 0x11, 0xEF, 0xF0,
-	0xD3, 0x94, 0x07, 0x50, 0x70, 0xE0, 0xFF, 0x74,
-	0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33,
-	0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x47, 0xE0,
-	0x5F, 0xFD, 0x7F, 0x47, 0x12, 0x32, 0x1E, 0x90,
-	0x82, 0x11, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07,
-	0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xFF,
-	0x90, 0x00, 0x46, 0xE0, 0x4F, 0xFD, 0x7F, 0x46,
-	0x12, 0x32, 0x1E, 0x90, 0x82, 0x12, 0xE0, 0x60,
-	0x18, 0x90, 0x82, 0x11, 0xE0, 0xFF, 0x74, 0x01,
-	0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8,
-	0xFC, 0xFF, 0x90, 0x00, 0x45, 0xE0, 0x4F, 0x80,
-	0x17, 0x90, 0x82, 0x11, 0xE0, 0xFF, 0x74, 0x01,
-	0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8,
-	0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x45, 0xE0, 0x5F,
-	0xFD, 0x7F, 0x45, 0x80, 0x7E, 0x90, 0x82, 0x11,
-	0xE0, 0x24, 0xF8, 0xF0, 0xE0, 0x24, 0x04, 0xFF,
-	0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3,
-	0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43,
-	0xE0, 0x5F, 0xFD, 0x7F, 0x43, 0x12, 0x32, 0x1E,
-	0x90, 0x82, 0x11, 0xE0, 0xFF, 0x74, 0x01, 0xA8,
-	0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC,
-	0xFF, 0x90, 0x00, 0x43, 0xE0, 0x4F, 0xFD, 0x7F,
-	0x43, 0x12, 0x32, 0x1E, 0x90, 0x82, 0x12, 0xE0,
-	0x60, 0x1D, 0x90, 0x82, 0x11, 0xE0, 0x24, 0x04,
-	0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02,
-	0xC3, 0x33, 0xD8, 0xFC, 0xFF, 0x90, 0x00, 0x42,
-	0xE0, 0x4F, 0xFD, 0x7F, 0x42, 0x80, 0x1C, 0x90,
-	0x82, 0x11, 0xE0, 0x24, 0x04, 0xFF, 0x74, 0x01,
-	0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8,
-	0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x42, 0xE0, 0x5F,
-	0xFD, 0x7F, 0x42, 0x12, 0x32, 0x1E, 0xD0, 0xD0,
-	0x92, 0xAF, 0x22, 0x90, 0x81, 0x24, 0xE0, 0x54,
-	0xFB, 0xF0, 0xE4, 0x90, 0x81, 0x30, 0xF0, 0x90,
-	0x81, 0x2B, 0xF0, 0x22, 0xEF, 0x24, 0xFE, 0x60,
-	0x0C, 0x04, 0x70, 0x28, 0x90, 0x81, 0x2D, 0x74,
-	0x01, 0xF0, 0xA3, 0xF0, 0x22, 0xED, 0x70, 0x0A,
-	0x90, 0x81, 0x3B, 0xE0, 0x90, 0x81, 0x2D, 0xF0,
-	0x80, 0x05, 0x90, 0x81, 0x2D, 0xED, 0xF0, 0x90,
-	0x81, 0x2D, 0xE0, 0xA3, 0xF0, 0x90, 0x81, 0x25,
-	0xE0, 0x44, 0x08, 0xF0, 0x22, 0x12, 0x4E, 0xAB,
-	0xEF, 0x64, 0x01, 0x60, 0x08, 0x90, 0x01, 0xB8,
-	0x74, 0x01, 0xF0, 0x80, 0x67, 0x90, 0x81, 0x2B,
-	0xE0, 0xFF, 0x54, 0x03, 0x60, 0x08, 0x90, 0x01,
-	0xB8, 0x74, 0x02, 0xF0, 0x80, 0x56, 0x90, 0x81,
-	0x29, 0xE0, 0xFE, 0xE4, 0xC3, 0x9E, 0x50, 0x08,
-	0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x80, 0x44,
-	0xEF, 0x30, 0xE2, 0x08, 0x90, 0x01, 0xB8, 0x74,
-	0x08, 0xF0, 0x80, 0x38, 0x90, 0x81, 0x2B, 0xE0,
-	0x30, 0xE4, 0x08, 0x90, 0x01, 0xB8, 0x74, 0x10,
-	0xF0, 0x80, 0x29, 0x90, 0x81, 0x25, 0xE0, 0x13,
-	0x13, 0x54, 0x3F, 0x20, 0xE0, 0x08, 0x90, 0x01,
-	0xB8, 0x74, 0x20, 0xF0, 0x80, 0x16, 0x90, 0x81,
-	0x3E, 0xE0, 0x60, 0x08, 0x90, 0x01, 0xB8, 0x74,
-	0x80, 0xF0, 0x80, 0x08, 0x90, 0x01, 0xB8, 0xE4,
-	0xF0, 0x7F, 0x01, 0x22, 0x90, 0x01, 0xB9, 0x74,
-	0x04, 0xF0, 0x7F, 0x00, 0x22, 0xEF, 0x60, 0x42,
-	0x90, 0x80, 0xDE, 0xE0, 0x64, 0x01, 0x70, 0x3A,
-	0x90, 0x81, 0x25, 0xE0, 0x54, 0xFE, 0xF0, 0x90,
-	0x05, 0x22, 0x74, 0x0F, 0xF0, 0x90, 0x06, 0x04,
-	0xE0, 0x54, 0xBF, 0xF0, 0xE4, 0xFF, 0x12, 0x4F,
-	0x0D, 0xBF, 0x01, 0x12, 0x90, 0x81, 0x24, 0xE0,
-	0x44, 0x40, 0xF0, 0x90, 0x81, 0x2A, 0x74, 0x06,
-	0xF0, 0x90, 0x81, 0x23, 0xF0, 0x22, 0x90, 0x01,
-	0xB9, 0x74, 0x01, 0xF0, 0x90, 0x01, 0xB8, 0x74,
-	0x08, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F,
-	0xF0, 0x90, 0x05, 0x27, 0xE0, 0x54, 0xBF, 0xF0,
-	0x90, 0x81, 0x2A, 0x74, 0x02, 0xF0, 0x90, 0x81,
-	0x23, 0xF0, 0x22, 0x12, 0x54, 0x65, 0x90, 0x81,
-	0x2A, 0x74, 0x0C, 0xF0, 0x90, 0x81, 0x23, 0xF0,
-	0x22, 0x90, 0x81, 0x24, 0xE0, 0xFF, 0x13, 0x13,
-	0x54, 0x3F, 0x30, 0xE0, 0x11, 0xEF, 0x54, 0xFB,
-	0xF0, 0x90, 0x81, 0x2B, 0xE0, 0x54, 0xFD, 0xF0,
-	0x54, 0x07, 0x70, 0x42, 0x80, 0x3D, 0x90, 0x81,
-	0x30, 0xE0, 0x04, 0xF0, 0x90, 0x81, 0x2B, 0xE0,
-	0x54, 0xEF, 0xF0, 0x90, 0x81, 0x30, 0xE0, 0xFF,
-	0xB4, 0x01, 0x02, 0x80, 0x04, 0xEF, 0xB4, 0x02,
-	0x06, 0x90, 0x05, 0x58, 0xE0, 0x04, 0xF0, 0x90,
-	0x81, 0x38, 0xE0, 0xFF, 0x90, 0x81, 0x30, 0xE0,
-	0xD3, 0x9F, 0x40, 0x0F, 0x90, 0x80, 0xDE, 0xE0,
-	0xB4, 0x01, 0x0B, 0x90, 0x81, 0x25, 0xE0, 0x54,
-	0xFB, 0xF0, 0x22, 0x12, 0x47, 0x2A, 0x22, 0x22,
-	0x90, 0x05, 0x2B, 0xE0, 0x7F, 0x00, 0x30, 0xE7,
-	0x02, 0x7F, 0x01, 0x22, 0x90, 0x05, 0x22, 0x74,
-	0xFF, 0xF0, 0x90, 0x05, 0x27, 0xE0, 0x44, 0x40,
-	0xF0, 0x90, 0x81, 0x22, 0x74, 0x03, 0xF0, 0x22,
-	0x90, 0x05, 0x27, 0xE0, 0x44, 0x40, 0xF0, 0x12,
-	0x49, 0xDD, 0x90, 0x81, 0x22, 0x74, 0x02, 0xF0,
-	0x22, 0x12, 0x49, 0xE3, 0x90, 0x81, 0x22, 0x74,
-	0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F,
-	0xF0, 0x90, 0x05, 0x27, 0xE0, 0x54, 0xBF, 0xF0,
-	0x90, 0x81, 0x22, 0x74, 0x04, 0xF0, 0x22, 0xAE,
-	0x07, 0x12, 0x51, 0x73, 0xBF, 0x01, 0x12, 0x90,
-	0x81, 0x23, 0xE0, 0x64, 0x02, 0x60, 0x0A, 0xAF,
-	0x06, 0x7D, 0x01, 0x12, 0x47, 0x3D, 0x7F, 0x01,
-	0x22, 0x7F, 0x00, 0x22, 0x90, 0x01, 0x57, 0xE0,
-	0x60, 0x48, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74,
-	0x02, 0xF0, 0x90, 0x81, 0x24, 0xE0, 0xFF, 0x13,
-	0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0C, 0xEF, 0x54,
-	0xFB, 0xF0, 0x90, 0x81, 0x2B, 0xE0, 0x54, 0xFD,
-	0xF0, 0x22, 0x90, 0x81, 0x30, 0xE0, 0x04, 0xF0,
-	0x90, 0x81, 0x2B, 0xE0, 0x54, 0xEF, 0xF0, 0x90,
-	0x81, 0x38, 0xE0, 0xFF, 0x90, 0x81, 0x30, 0xE0,
-	0xD3, 0x9F, 0x40, 0x0E, 0x90, 0x80, 0xDE, 0xE0,
-	0xB4, 0x01, 0x07, 0x90, 0x81, 0x25, 0xE0, 0x54,
-	0xFB, 0xF0, 0x22, 0x90, 0x80, 0x3F, 0xE0, 0xFF,
-	0x7D, 0x01, 0x12, 0x6D, 0x69, 0x8E, 0x54, 0x8F,
-	0x55, 0xAD, 0x55, 0xAC, 0x54, 0xAF, 0x53, 0x12,
-	0x4F, 0x82, 0xAF, 0x55, 0xAE, 0x54, 0x90, 0x04,
-	0x80, 0xE0, 0x54, 0x0F, 0xFD, 0xAC, 0x07, 0x74,
-	0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5,
-	0x83, 0xE0, 0x44, 0x01, 0xF0, 0x74, 0x11, 0x2C,
-	0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0,
-	0x54, 0xFB, 0xF0, 0xAC, 0x07, 0x74, 0x16, 0x2C,
-	0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0,
-	0x44, 0xFA, 0xF0, 0x74, 0x15, 0x2C, 0xF5, 0x82,
-	0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x1F,
-	0xF0, 0xAC, 0x07, 0x74, 0x06, 0x2C, 0xF5, 0x82,
-	0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x0F,
-	0xF0, 0x90, 0x04, 0x53, 0xE4, 0xF0, 0x90, 0x04,
-	0x52, 0xF0, 0x90, 0x04, 0x51, 0x74, 0xFF, 0xF0,
-	0x90, 0x04, 0x50, 0x74, 0xFD, 0xF0, 0x74, 0x14,
-	0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83,
-	0xE0, 0x54, 0xC0, 0x4D, 0xFD, 0x74, 0x14, 0x2F,
-	0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xED,
-	0xF0, 0x22, 0xAB, 0x07, 0xAA, 0x06, 0xED, 0x2B,
-	0xFB, 0xE4, 0x3A, 0xFA, 0xC3, 0x90, 0x80, 0xDB,
-	0xE0, 0x9B, 0x90, 0x80, 0xDA, 0xE0, 0x9A, 0x50,
-	0x13, 0xA3, 0xE0, 0x24, 0x01, 0xFF, 0x90, 0x80,
-	0xDA, 0xE0, 0x34, 0x00, 0xFE, 0xC3, 0xEB, 0x9F,
-	0xFB, 0xEA, 0x9E, 0xFA, 0xEA, 0x90, 0xFD, 0x11,
-	0xF0, 0xAF, 0x03, 0x74, 0x00, 0x2F, 0xF5, 0x82,
-	0xE4, 0x34, 0xFB, 0xF5, 0x83, 0xE0, 0xFF, 0x22,
-	0x12, 0x1F, 0xA4, 0xFF, 0x54, 0x01, 0xFE, 0x90,
-	0x81, 0x42, 0xE0, 0x54, 0xFE, 0x4E, 0xF0, 0xEF,
-	0xC3, 0x13, 0x30, 0xE0, 0x0A, 0x90, 0x00, 0x01,
-	0x12, 0x1F, 0xBD, 0x90, 0x81, 0x43, 0xF0, 0x22,
-	0x90, 0x81, 0x45, 0xE0, 0x30, 0xE0, 0x2D, 0x90,
-	0x81, 0x48, 0xE0, 0x04, 0xF0, 0xE0, 0xFF, 0x90,
-	0x81, 0x46, 0xE0, 0xB5, 0x07, 0x1E, 0x90, 0x06,
-	0x92, 0xE0, 0x54, 0x1C, 0x70, 0x0B, 0x12, 0x4F,
-	0x0B, 0x90, 0x81, 0x49, 0xE0, 0x04, 0xF0, 0x80,
-	0x06, 0x90, 0x06, 0x92, 0x74, 0x1C, 0xF0, 0xE4,
-	0x90, 0x81, 0x48, 0xF0, 0x22, 0x00, 0xBB, 0x8E,
-};
diff --git a/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c b/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c
index e4f20da..8a7947d 100644
--- a/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c
+++ b/drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c
@@ -819,7 +819,7 @@
 	struct hal_data_8188e	*pHalData = GET_HAL_DATA(adapt);
 	struct odm_dm_struct *dm_odm = &pHalData->odmpriv;
 
-	if (ODM_CheckPowerStatus(adapt) == false)
+	if (!ODM_CheckPowerStatus(adapt))
 		return;
 
 	ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("Save ADDA parameters.\n"));
@@ -888,7 +888,7 @@
 	ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("ADDA ON.\n"));
 
 	pathOn = isPathAOn ? 0x04db25a4 : 0x0b1b25a4;
-	if (false == is2t) {
+	if (!is2t) {
 		pathOn = 0x0bdb25a0;
 		ODM_SetBBReg(dm_odm, ADDAReg[0], bMaskDWord, 0x0b1b25a0);
 	} else {
@@ -1276,407 +1276,6 @@
 	}
 }
 
-/* Analog Pre-distortion calibration */
-#define		APK_BB_REG_NUM	8
-#define		APK_CURVE_REG_NUM 4
-#define		PATH_NUM		2
-
-static void phy_APCalibrate_8188E(struct adapter *adapt, s8 delta, bool is2t)
-{
-	struct hal_data_8188e	*pHalData = GET_HAL_DATA(adapt);
-	struct odm_dm_struct *dm_odm = &pHalData->odmpriv;
-	u32 regD[PATH_NUM];
-	u32 tmpreg, index, offset,  apkbound;
-	u8 path, i, pathbound = PATH_NUM;
-	u32 BB_backup[APK_BB_REG_NUM];
-	u32 BB_REG[APK_BB_REG_NUM] = {
-		rFPGA1_TxBlock, 	rOFDM0_TRxPathEnable,
-		rFPGA0_RFMOD, rOFDM0_TRMuxPar,
-		rFPGA0_XCD_RFInterfaceSW, rFPGA0_XAB_RFInterfaceSW,
-		rFPGA0_XA_RFInterfaceOE, rFPGA0_XB_RFInterfaceOE	};
-	u32 BB_AP_MODE[APK_BB_REG_NUM] = {
-		0x00000020, 0x00a05430, 0x02040000,
-		0x000800e4, 0x00204000 };
-	u32 BB_normal_AP_MODE[APK_BB_REG_NUM] = {
-		0x00000020, 0x00a05430, 0x02040000,
-		0x000800e4, 0x22204000 };
-
-	u32 AFE_backup[IQK_ADDA_REG_NUM];
-	u32 AFE_REG[IQK_ADDA_REG_NUM] = {
-		rFPGA0_XCD_SwitchControl, rBlue_Tooth,
-		rRx_Wait_CCA, 	rTx_CCK_RFON,
-		rTx_CCK_BBON, rTx_OFDM_RFON,
-		rTx_OFDM_BBON, rTx_To_Rx,
-		rTx_To_Tx, 	rRx_CCK,
-		rRx_OFDM, 	rRx_Wait_RIFS,
-		rRx_TO_Rx, 	rStandby,
-		rSleep, 			rPMPD_ANAEN };
-
-	u32 MAC_backup[IQK_MAC_REG_NUM];
-	u32 MAC_REG[IQK_MAC_REG_NUM] = {
-		REG_TXPAUSE, 	REG_BCN_CTRL,
-		REG_BCN_CTRL_1, REG_GPIO_MUXCFG};
-
-	u32 APK_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = {
-		{0x0852c, 0x1852c, 0x5852c, 0x1852c, 0x5852c},
-		{0x2852e, 0x0852e, 0x3852e, 0x0852e, 0x0852e}
-	};
-
-	u32 APK_normal_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = {
-		{0x0852c, 0x0a52c, 0x3a52c, 0x5a52c, 0x5a52c}, /* path settings equal to path b settings */
-		{0x0852c, 0x0a52c, 0x5a52c, 0x5a52c, 0x5a52c}
-	};
-
-	u32 APK_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = {
-		{0x52019, 0x52014, 0x52013, 0x5200f, 0x5208d},
-		{0x5201a, 0x52019, 0x52016, 0x52033, 0x52050}
-	};
-
-	u32 APK_normal_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = {
-		{0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a}, /* path settings equal to path b settings */
-		{0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a}
-	};
-
-	u32 AFE_on_off[PATH_NUM] = {
-		0x04db25a4, 0x0b1b25a4};	/* path A on path B off / path A off path B on */
-
-	u32 APK_offset[PATH_NUM] = {
-		rConfig_AntA, rConfig_AntB};
-
-	u32 APK_normal_offset[PATH_NUM] = {
-		rConfig_Pmpd_AntA, rConfig_Pmpd_AntB};
-
-	u32 APK_value[PATH_NUM] = {
-		0x92fc0000, 0x12fc0000};
-
-	u32 APK_normal_value[PATH_NUM] = {
-		0x92680000, 0x12680000};
-
-	s8 APK_delta_mapping[APK_BB_REG_NUM][13] = {
-		{-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
-		{-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
-		{-6, -4, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
-		{-1, -1, -1, -1, -1, -1, 0, 1, 2, 3, 4, 5, 6},
-		{-11, -9, -7, -5, -3, -1, 0, 0, 0, 0, 0, 0, 0}
-	};
-
-	u32 APK_normal_setting_value_1[13] = {
-		0x01017018, 0xf7ed8f84, 0x1b1a1816, 0x2522201e, 0x322e2b28,
-		0x433f3a36, 0x5b544e49, 0x7b726a62, 0xa69a8f84, 0xdfcfc0b3,
-		0x12680000, 0x00880000, 0x00880000
-	};
-
-	u32 APK_normal_setting_value_2[16] = {
-		0x01c7021d, 0x01670183, 0x01000123, 0x00bf00e2, 0x008d00a3,
-		0x0068007b, 0x004d0059, 0x003a0042, 0x002b0031, 0x001f0025,
-		0x0017001b, 0x00110014, 0x000c000f, 0x0009000b, 0x00070008,
-		0x00050006
-	};
-
-	u32 APK_result[PATH_NUM][APK_BB_REG_NUM];	/* val_1_1a, val_1_2a, val_2a, val_3a, val_4a */
-	s32 BB_offset, delta_V, delta_offset;
-
-	if (*(dm_odm->mp_mode) == 1) {
-		struct mpt_context *pMptCtx = &(adapt->mppriv.MptCtx);
-		pMptCtx->APK_bound[0] = 45;
-		pMptCtx->APK_bound[1] = 52;
-	}
-
-	ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("==>phy_APCalibrate_8188E() delta %d\n", delta));
-	ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,  ("AP Calibration for %s\n", (is2t ? "2T2R" : "1T1R")));
-	if (!is2t)
-		pathbound = 1;
-
-	/* 2 FOR NORMAL CHIP SETTINGS */
-
-/*  Temporarily do not allow normal driver to do the following settings
- *  because these offset and value will cause RF internal PA to be
- *  unpredictably disabled by HW, such that RF Tx signal  will disappear
- *  after disable/enable card many times on 88CU. RF SD and DD have not
- *  find the root cause, so we remove these actions temporarily.
- */
-	if (*(dm_odm->mp_mode) != 1)
-		return;
-	/* settings adjust for normal chip */
-	for (index = 0; index < PATH_NUM; index++) {
-		APK_offset[index] = APK_normal_offset[index];
-		APK_value[index] = APK_normal_value[index];
-		AFE_on_off[index] = 0x6fdb25a4;
-	}
-
-	for (index = 0; index < APK_BB_REG_NUM; index++) {
-		for (path = 0; path < pathbound; path++) {
-			APK_RF_init_value[path][index] = APK_normal_RF_init_value[path][index];
-			APK_RF_value_0[path][index] = APK_normal_RF_value_0[path][index];
-		}
-		BB_AP_MODE[index] = BB_normal_AP_MODE[index];
-	}
-
-	apkbound = 6;
-
-	/* save BB default value */
-	for (index = 0; index < APK_BB_REG_NUM; index++) {
-		if (index == 0)		/* skip */
-			continue;
-		BB_backup[index] = ODM_GetBBReg(dm_odm, BB_REG[index], bMaskDWord);
-	}
-
-	/* save MAC default value */
-	_PHY_SaveMACRegisters(adapt, MAC_REG, MAC_backup);
-
-	/* save AFE default value */
-	_PHY_SaveADDARegisters(adapt, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM);
-
-	for (path = 0; path < pathbound; path++) {
-		if (path == RF_PATH_A) {
-			/* path A APK */
-			/* load APK setting */
-			/* path-A */
-			offset = rPdp_AntA;
-			for (index = 0; index < 11; index++) {
-				ODM_SetBBReg(dm_odm, offset, bMaskDWord, APK_normal_setting_value_1[index]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-					     ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n",
-					     offset, ODM_GetBBReg(dm_odm, offset, bMaskDWord)));
-				offset += 0x04;
-			}
-
-			ODM_SetBBReg(dm_odm, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000);
-
-			offset = rConfig_AntA;
-			for (; index < 13; index++) {
-				ODM_SetBBReg(dm_odm, offset, bMaskDWord, APK_normal_setting_value_1[index]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-					     ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n",
-					     offset, ODM_GetBBReg(dm_odm, offset, bMaskDWord)));
-				offset += 0x04;
-			}
-
-			/* page-B1 */
-			ODM_SetBBReg(dm_odm, rFPGA0_IQK, bMaskDWord, 0x40000000);
-
-			/* path A */
-			offset = rPdp_AntA;
-			for (index = 0; index < 16; index++) {
-				ODM_SetBBReg(dm_odm, offset, bMaskDWord, APK_normal_setting_value_2[index]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-					     ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n",
-					     offset, ODM_GetBBReg(dm_odm, offset, bMaskDWord)));
-
-				offset += 0x04;
-			}
-			ODM_SetBBReg(dm_odm,  rFPGA0_IQK, bMaskDWord, 0x00000000);
-		} else if (path == RF_PATH_B) {
-			/* path B APK */
-			/* load APK setting */
-			/* path-B */
-			offset = rPdp_AntB;
-			for (index = 0; index < 10; index++) {
-				ODM_SetBBReg(dm_odm, offset, bMaskDWord, APK_normal_setting_value_1[index]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-					     ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n",
-					     offset, ODM_GetBBReg(dm_odm, offset, bMaskDWord)));
-
-				offset += 0x04;
-			}
-			ODM_SetBBReg(dm_odm, rConfig_Pmpd_AntA, bMaskDWord, 0x12680000);
-			PHY_SetBBReg(adapt, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000);
-
-			offset = rConfig_AntA;
-			index = 11;
-			for (; index < 13; index++) { /* offset 0xb68, 0xb6c */
-				ODM_SetBBReg(dm_odm, offset, bMaskDWord, APK_normal_setting_value_1[index]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-					     ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n",
-					     offset, ODM_GetBBReg(dm_odm, offset, bMaskDWord)));
-				offset += 0x04;
-			}
-
-			/* page-B1 */
-			ODM_SetBBReg(dm_odm, rFPGA0_IQK, bMaskDWord, 0x40000000);
-
-			/* path B */
-			offset = 0xb60;
-			for (index = 0; index < 16; index++) {
-				ODM_SetBBReg(dm_odm, offset, bMaskDWord, APK_normal_setting_value_2[index]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-					     ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n",
-					     offset, ODM_GetBBReg(dm_odm, offset, bMaskDWord)));
-
-				offset += 0x04;
-			}
-			ODM_SetBBReg(dm_odm, rFPGA0_IQK, bMaskDWord, 0);
-		}
-
-		/* save RF default value */
-		regD[path] = PHY_QueryRFReg(adapt, path, RF_TXBIAS_A, bMaskDWord);
-
-		/* Path A AFE all on, path B AFE All off or vise versa */
-		for (index = 0; index < IQK_ADDA_REG_NUM; index++)
-			ODM_SetBBReg(dm_odm, AFE_REG[index], bMaskDWord, AFE_on_off[path]);
-		ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-			     ("phy_APCalibrate_8188E() offset 0xe70 %x\n",
-			     ODM_GetBBReg(dm_odm, rRx_Wait_CCA, bMaskDWord)));
-
-		/* BB to AP mode */
-		if (path == 0) {
-			for (index = 0; index < APK_BB_REG_NUM; index++) {
-				if (index == 0)		/* skip */
-					continue;
-				else if (index < 5)
-				ODM_SetBBReg(dm_odm, BB_REG[index], bMaskDWord, BB_AP_MODE[index]);
-				else if (BB_REG[index] == 0x870)
-					ODM_SetBBReg(dm_odm, BB_REG[index], bMaskDWord, BB_backup[index]|BIT10|BIT26);
-				else
-					ODM_SetBBReg(dm_odm, BB_REG[index], BIT10, 0x0);
-			}
-
-			ODM_SetBBReg(dm_odm, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00);
-			ODM_SetBBReg(dm_odm, rRx_IQK_Tone_A, bMaskDWord, 0x01008c00);
-		} else {
-			/* path B */
-			ODM_SetBBReg(dm_odm, rTx_IQK_Tone_B, bMaskDWord, 0x01008c00);
-			ODM_SetBBReg(dm_odm, rRx_IQK_Tone_B, bMaskDWord, 0x01008c00);
-		}
-
-		ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-			     ("phy_APCalibrate_8188E() offset 0x800 %x\n",
-			     ODM_GetBBReg(dm_odm, 0x800, bMaskDWord)));
-
-		/* MAC settings */
-		_PHY_MACSettingCalibration(adapt, MAC_REG, MAC_backup);
-
-		if (path == RF_PATH_A) {
-			/* Path B to standby mode */
-			ODM_SetRFReg(dm_odm, RF_PATH_B, RF_AC, bMaskDWord, 0x10000);
-		} else {
-			/* Path A to standby mode */
-			ODM_SetRFReg(dm_odm, RF_PATH_A, RF_AC, bMaskDWord, 0x10000);
-			ODM_SetRFReg(dm_odm, RF_PATH_A, RF_MODE1, bMaskDWord, 0x1000f);
-			ODM_SetRFReg(dm_odm, RF_PATH_A, RF_MODE2, bMaskDWord, 0x20103);
-		}
-
-		delta_offset = ((delta+14)/2);
-		if (delta_offset < 0)
-			delta_offset = 0;
-		else if (delta_offset > 12)
-			delta_offset = 12;
-
-		/* AP calibration */
-		for (index = 0; index < APK_BB_REG_NUM; index++) {
-			if (index != 1)	/* only DO PA11+PAD01001, AP RF setting */
-				continue;
-
-			tmpreg = APK_RF_init_value[path][index];
-			if (!dm_odm->RFCalibrateInfo.bAPKThermalMeterIgnore) {
-				BB_offset = (tmpreg & 0xF0000) >> 16;
-
-				if (!(tmpreg & BIT15)) /* sign bit 0 */
-					BB_offset = -BB_offset;
-
-				delta_V = APK_delta_mapping[index][delta_offset];
-
-				BB_offset += delta_V;
-
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
-					     ("phy_APCalibrate_8188E() APK index %d tmpreg 0x%x delta_V %d delta_offset %d\n",
-					     index, tmpreg, delta_V, delta_offset));
-
-				if (BB_offset < 0) {
-					tmpreg = tmpreg & (~BIT15);
-					BB_offset = -BB_offset;
-				} else {
-					tmpreg = tmpreg | BIT15;
-				}
-				tmpreg = (tmpreg & 0xFFF0FFFF) | (BB_offset << 16);
-			}
-
-			ODM_SetRFReg(dm_odm, path, RF_IPA_A, bMaskDWord, 0x8992e);
-			ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("phy_APCalibrate_8188E() offset 0xc %x\n", PHY_QueryRFReg(adapt, path, RF_IPA_A, bMaskDWord)));
-			ODM_SetRFReg(dm_odm, path, RF_AC, bMaskDWord, APK_RF_value_0[path][index]);
-			ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,  ("phy_APCalibrate_8188E() offset 0x0 %x\n", PHY_QueryRFReg(adapt, path, RF_AC, bMaskDWord)));
-			ODM_SetRFReg(dm_odm, path, RF_TXBIAS_A, bMaskDWord, tmpreg);
-			ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("phy_APCalibrate_8188E() offset 0xd %x\n", PHY_QueryRFReg(adapt, path, RF_TXBIAS_A, bMaskDWord)));
-			/*  PA11+PAD01111, one shot */
-			i = 0;
-			do {
-				ODM_SetBBReg(dm_odm, rFPGA0_IQK, bMaskDWord, 0x80000000);
-				ODM_SetBBReg(dm_odm, APK_offset[path], bMaskDWord, APK_value[0]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n", APK_offset[path], ODM_GetBBReg(dm_odm, APK_offset[path], bMaskDWord)));
-				ODM_delay_ms(3);
-				ODM_SetBBReg(dm_odm, APK_offset[path], bMaskDWord, APK_value[1]);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("phy_APCalibrate_8188E() offset 0x%x value 0x%x\n", APK_offset[path], ODM_GetBBReg(dm_odm, APK_offset[path], bMaskDWord)));
-
-				ODM_delay_ms(20);
-				ODM_SetBBReg(dm_odm, rFPGA0_IQK, bMaskDWord, 0x00000000);
-
-				if (path == RF_PATH_A)
-					tmpreg = ODM_GetBBReg(dm_odm, rAPK, 0x03E00000);
-				else
-					tmpreg = ODM_GetBBReg(dm_odm, rAPK, 0xF8000000);
-				ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("phy_APCalibrate_8188E() offset 0xbd8[25:21] %x\n", tmpreg));
-
-				i++;
-			} while (tmpreg > apkbound && i < 4);
-
-			APK_result[path][index] = tmpreg;
-		}
-	}
-
-	/* reload MAC default value */
-	_PHY_ReloadMACRegisters(adapt, MAC_REG, MAC_backup);
-
-	/* reload BB default value */
-	for (index = 0; index < APK_BB_REG_NUM; index++) {
-		if (index == 0)		/* skip */
-			continue;
-		ODM_SetBBReg(dm_odm, BB_REG[index], bMaskDWord, BB_backup[index]);
-	}
-
-	/* reload AFE default value */
-	reload_adda_reg(adapt, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM);
-
-	/* reload RF path default value */
-	for (path = 0; path < pathbound; path++) {
-		ODM_SetRFReg(dm_odm, path, 0xd, bMaskDWord, regD[path]);
-		if (path == RF_PATH_B) {
-			ODM_SetRFReg(dm_odm, RF_PATH_A, RF_MODE1, bMaskDWord, 0x1000f);
-			ODM_SetRFReg(dm_odm, RF_PATH_A, RF_MODE2, bMaskDWord, 0x20101);
-		}
-
-		/* note no index == 0 */
-		if (APK_result[path][1] > 6)
-			APK_result[path][1] = 6;
-		ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("apk path %d result %d 0x%x \t", path, 1, APK_result[path][1]));
-	}
-
-	ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,  ("\n"));
-
-	for (path = 0; path < pathbound; path++) {
-		ODM_SetRFReg(dm_odm, path, 0x3, bMaskDWord,
-			     ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (APK_result[path][1] << 5) | APK_result[path][1]));
-		if (path == RF_PATH_A)
-			ODM_SetRFReg(dm_odm, path, 0x4, bMaskDWord,
-				     ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x00 << 5) | 0x05));
-		else
-			ODM_SetRFReg(dm_odm, path, 0x4, bMaskDWord,
-				     ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x02 << 5) | 0x05));
-		ODM_SetRFReg(dm_odm, path, RF_BS_PA_APSET_G9_G11, bMaskDWord,
-			     ((0x08 << 15) | (0x08 << 10) | (0x08 << 5) | 0x08));
-	}
-
-	dm_odm->RFCalibrateInfo.bAPKdone = true;
-
-	ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("<==phy_APCalibrate_8188E()\n"));
-}
-
-#define		DP_BB_REG_NUM		7
-#define		DP_RF_REG_NUM		1
-#define		DP_RETRY_LIMIT		10
-#define		DP_PATH_NUM		2
-#define		DP_DPK_NUM			3
-#define		DP_DPK_VALUE_NUM	2
-
 void PHY_IQCalibrate_8188E(struct adapter *adapt, bool recovery)
 {
 	struct hal_data_8188e	*pHalData = GET_HAL_DATA(adapt);
@@ -1697,7 +1296,7 @@
 	bool is2t;
 
 	is2t = (dm_odm->RFType == ODM_2T2R) ? true : false;
-	if (ODM_CheckPowerStatus(adapt) == false)
+	if (!ODM_CheckPowerStatus(adapt))
 		return;
 
 	if (!(dm_odm->SupportAbility & ODM_RF_CALIBRATION))
@@ -1867,28 +1466,6 @@
 		     ("LCK:Finish!!!interface %d\n", dm_odm->InterfaceIndex));
 }
 
-void PHY_APCalibrate_8188E(struct adapter *adapt, s8 delta)
-{
-	struct hal_data_8188e	*pHalData = GET_HAL_DATA(adapt);
-	struct odm_dm_struct *dm_odm = &pHalData->odmpriv;
-
-	return;
-	if (!(dm_odm->SupportAbility & ODM_RF_CALIBRATION))
-		return;
-
-#if FOR_BRAZIL_PRETEST != 1
-	if (dm_odm->RFCalibrateInfo.bAPKdone)
-#endif
-		return;
-
-	if (dm_odm->RFType == ODM_2T2R) {
-		phy_APCalibrate_8188E(adapt, delta, true);
-	} else {
-		/*  For 88C 1T1R */
-		phy_APCalibrate_8188E(adapt, delta, false);
-	}
-}
-
 static void phy_setrfpathswitch_8188e(struct adapter *adapt, bool main, bool is2t)
 {
 	struct hal_data_8188e	*pHalData = GET_HAL_DATA(adapt);
diff --git a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
index e913a22..5700dbc 100644
--- a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
+++ b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
@@ -85,7 +85,7 @@
 				value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd));
 				value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd));
 
-				/*  Write the value back to sytem register */
+				/*  Write the value back to system register */
 				rtw_write8(padapter, offset, value);
 				break;
 			case PWR_CMD_POLLING:
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 8c858775..8be2ad7 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -273,7 +273,7 @@
 static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
 {
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	u16 *fctrl;
+	__le16 *fctrl;
 	u32 rate_len, pktlen;
 	struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
 	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
@@ -360,7 +360,7 @@
 	struct rtw_ieee80211_hdr	*pwlanhdr;
 	struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
 	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
-	u16 *fctrl;
+	__le16 *fctrl;
 
 	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
 
@@ -391,7 +391,7 @@
 	u8 bForcePowerSave)
 {
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	u16 *fctrl;
+	__le16 *fctrl;
 	u32 pktlen;
 	struct mlme_priv *pmlmepriv = &adapt->mlmepriv;
 	struct wlan_network		*cur_network = &pmlmepriv->cur_network;
@@ -450,7 +450,7 @@
 static void ConstructProbeRsp(struct adapter *adapt, u8 *pframe, u32 *pLength, u8 *StaAddr, bool bHideSSID)
 {
 	struct rtw_ieee80211_hdr	*pwlanhdr;
-	u16 *fctrl;
+	__le16 *fctrl;
 	u8 *mac, *bssid;
 	u32 pktlen;
 	struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
@@ -484,7 +484,7 @@
 	*pLength = pktlen;
 }
 
-/*  To check if reserved page content is destroyed by beacon beacuse beacon is too large. */
+/*  To check if reserved page content is destroyed by beacon because beacon is too large. */
 /*  2010.06.23. Added by tynli. */
 void CheckFwRsvdPageContent(struct adapter *Adapter)
 {
@@ -496,9 +496,9 @@
 /*			(1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. */
 /*	Input: */
 /*	    bDLFinished - false: At the first time we will send all the packets as a large packet to Hw, */
-/*						so we need to set the packet length to total lengh. */
+/*						so we need to set the packet length to total length. */
 /*			      true: At the second time, we should send the first packet (default:beacon) */
-/*						to Hw again and set the lengh in descriptor to the real beacon lengh. */
+/*						to Hw again and set the length in descriptor to the real beacon length. */
 /*  2009.10.15 by tynli. */
 static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
 {
@@ -671,7 +671,7 @@
 			DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
 		/*  */
 		/*  We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */
-		/*  becuase we need to free the Tx BCN Desc which is used by the first reserved page packet. */
+		/*  because we need to free the Tx BCN Desc which is used by the first reserved page packet. */
 		/*  At run time, we cannot get the Tx Desc until it is released in TxHandleInterrupt() so we will return */
 		/*  the beacon TCB in the following code. 2011.11.23. by tynli. */
 		/*  */
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 292ba62..52b3fba 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -19,6 +19,7 @@
  ******************************************************************************/
 #define _HAL_INIT_C_
 
+#include <linux/firmware.h>
 #include <drv_types.h>
 #include <rtw_efuse.h>
 
@@ -588,13 +589,15 @@
 	u8 writeFW_retry = 0;
 	u32 fwdl_start_time;
 	struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
-
-	u8 *FwImage;
-	u32			FwImageLen;
+	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
+	struct device *device = dvobj_to_dev(dvobj);
 	struct rt_firmware *pFirmware = NULL;
+	const struct firmware *fw;
 	struct rt_firmware_hdr *pFwHdr = NULL;
 	u8 *pFirmwareBuf;
-	u32			FirmwareLen;
+	u32 FirmwareLen;
+	char fw_name[] = "rtlwifi/rtl8188eufw.bin";
+	static int log_version;
 
 	RT_TRACE(_module_hal_init_c_, _drv_info_, ("+%s\n", __func__));
 	pFirmware = (struct rt_firmware *)rtw_zmalloc(sizeof(struct rt_firmware));
@@ -603,27 +606,32 @@
 		goto Exit;
 	}
 
-	FwImage = (u8 *)Rtl8188E_FwImageArray;
-	FwImageLen = Rtl8188E_FWImgArrayLength;
-
-	pFirmware->eFWSource = FW_SOURCE_HEADER_FILE;
-
-	switch (pFirmware->eFWSource) {
-	case FW_SOURCE_IMG_FILE:
-		break;
-	case FW_SOURCE_HEADER_FILE:
-		if (FwImageLen > FW_8188E_SIZE) {
-			rtStatus = _FAIL;
-			RT_TRACE(_module_hal_init_c_, _drv_err_, ("Firmware size exceed 0x%X. Check it.\n", FW_8188E_SIZE));
-			goto Exit;
-		}
-
-		pFirmware->szFwBuffer = FwImage;
-		pFirmware->ulFwLength = FwImageLen;
-		break;
+	if (request_firmware(&fw, fw_name, device)) {
+		rtStatus = _FAIL;
+		goto Exit;
 	}
+	if (!fw) {
+		pr_err("Firmware %s not available\n", fw_name);
+		rtStatus = _FAIL;
+		goto Exit;
+	}
+	if (fw->size > FW_8188E_SIZE) {
+		rtStatus = _FAIL;
+		RT_TRACE(_module_hal_init_c_, _drv_err_, ("Firmware size exceed 0x%X. Check it.\n", FW_8188E_SIZE));
+		goto Exit;
+	}
+
+	pFirmware->szFwBuffer = kzalloc(FW_8188E_SIZE, GFP_KERNEL);
+	if (!pFirmware->szFwBuffer) {
+		rtStatus = _FAIL;
+		goto Exit;
+	}
+	memcpy(pFirmware->szFwBuffer, fw->data, fw->size);
+	pFirmware->ulFwLength = fw->size;
 	pFirmwareBuf = pFirmware->szFwBuffer;
 	FirmwareLen = pFirmware->ulFwLength;
+	release_firmware(fw);
+
 	DBG_88E_LEVEL(_drv_info_, "+%s: !bUsedWoWLANFw, FmrmwareLen:%d+\n", __func__, FirmwareLen);
 
 	/*  To Check Fw header. Added by tynli. 2009.12.04. */
@@ -633,8 +641,10 @@
 	pHalData->FirmwareSubVersion = pFwHdr->Subversion;
 	pHalData->FirmwareSignature = le16_to_cpu(pFwHdr->Signature);
 
-	DBG_88E("%s: fw_ver =%d fw_subver =%d sig = 0x%x\n",
-		__func__, pHalData->FirmwareVersion, pHalData->FirmwareSubVersion, pHalData->FirmwareSignature);
+	if (!log_version++)
+		pr_info("%sFirmware Version %d, SubVersion %d, Signature 0x%x\n",
+			DRIVER_PREFIX, pHalData->FirmwareVersion,
+			pHalData->FirmwareSubVersion, pHalData->FirmwareSignature);
 
 	if (IS_FW_HEADER_EXIST(pFwHdr)) {
 		/*  Shift 32 bytes for FW header */
@@ -677,7 +687,7 @@
 		goto Exit;
 	}
 	RT_TRACE(_module_hal_init_c_, _drv_info_, ("Firmware is ready to run!\n"));
-
+	kfree(pFirmware->szFwBuffer);
 Exit:
 
 	kfree(pFirmware);
@@ -1479,7 +1489,6 @@
 
 static bool hal_EfusePgPacketWriteData(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest)
 {
-	bool bRet = false;
 	u16	efuse_addr = *pAddr;
 	u8 badworden = 0;
 	u32	PgWriteSuccess = 0;
@@ -1497,7 +1506,6 @@
 		else
 			return true;
 	}
-	return bRet;
 }
 
 static bool
@@ -1653,7 +1661,7 @@
 {
 	u16	efuse_max_available_len = 0;
 
-	/* Change to check TYPE_EFUSE_MAP_LEN , beacuse 8188E raw 256, logic map over 256. */
+	/* Change to check TYPE_EFUSE_MAP_LEN , because 8188E raw 256, logic map over 256. */
 	EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&efuse_max_available_len, false);
 
 	if (Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len)
@@ -2100,7 +2108,7 @@
 	if (chnl <= 14) {
 		bIn24G = true;
 
-		if (chnl < 3)			/*  Chanel 1-2 */
+		if (chnl < 3)			/*  Channel 1-2 */
 			*pGroup = 0;
 		else if (chnl < 6)		/*  Channel 3-5 */
 			*pGroup = 1;
@@ -2182,7 +2190,7 @@
 		pHalData->bTXPowerDataReadFromEEPORM = true;
 
 	for (rfPath = 0; rfPath < pHalData->NumTotalRFPath; rfPath++) {
-		for (ch = 0; ch <= CHANNEL_MAX_NUMBER; ch++) {
+		for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
 			bIn24G = Hal_GetChnlGroup88E(ch, &group);
 			if (bIn24G) {
 				pHalData->Index24G_CCK_Base[rfPath][ch] = pwrInfo24G.IndexCCK_Base[rfPath][group];
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
index ff468a68..68bb96d 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
@@ -559,7 +559,7 @@
 
 	/*  */
 	/*  1. Read PHY_REG.TXT BB INIT!! */
-	/*  We will seperate as 88C / 92C according to chip version */
+	/*  We will separate as 88C / 92C according to chip version */
 	/*  */
 	if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG))
 		rtStatus = _FAIL;
@@ -685,7 +685,7 @@
 
 	/*  */
 	/*  Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to */
-	/*  3dbm, and OFDM HT equals to 0dbm repectively. */
+	/*  3dbm, and OFDM HT equals to 0dbm respectively. */
 	/*  Note: */
 	/*	The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */
 	/*  By Bruce, 2008-01-29. */
@@ -1006,12 +1006,12 @@
 	switch (pHalData->CurrentChannelBW) {
 	case HT_CHANNEL_WIDTH_20:
 		regBwOpMode |= BW_OPMODE_20MHZ;
-		/*  2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+		/*  2007/02/07 Mark by Emily because we have not verify whether this register works */
 		rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
 		break;
 	case HT_CHANNEL_WIDTH_40:
 		regBwOpMode &= ~BW_OPMODE_20MHZ;
-		/*  2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+		/*  2007/02/07 Mark by Emily because we have not verify whether this register works */
 		rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
 		regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5);
 		rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
index bfdf9b3..299e03e 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
@@ -181,7 +181,7 @@
 		 * tx power mechanism because it is referenced by BT
 		 * coexist mechanism.
 		 * In the future, two mechanism shall be separated from
-		 * each other and maintained independantly. */
+		 * each other and maintained independently. */
 		if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
 			TxAGC[RF_PATH_A] = 0x10101010;
 			TxAGC[RF_PATH_B] = 0x10101010;
@@ -216,11 +216,11 @@
 	ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 1, &direction, &pwrtrac_value);
 
 	if (direction == 1) {
-		/*  Increase TX pwoer */
+		/*  Increase TX power */
 		TxAGC[0] += pwrtrac_value;
 		TxAGC[1] += pwrtrac_value;
 	} else if (direction == 2) {
-		/*  Decrease TX pwoer */
+		/*  Decrease TX power */
 		TxAGC[0] -=  pwrtrac_value;
 		TxAGC[1] -=  pwrtrac_value;
 	}
@@ -292,7 +292,7 @@
 			if (pHalData->pwrGroupCnt == 1)
 				chnlGroup = 0;
 			if (pHalData->pwrGroupCnt >= pHalData->PGMaxGroup) {
-				if (Channel < 3)			/*  Chanel 1-2 */
+				if (Channel < 3)			/*  Channel 1-2 */
 					chnlGroup = 0;
 				else if (Channel < 6)		/*  Channel 3-5 */
 					chnlGroup = 1;
@@ -349,7 +349,7 @@
 		}
 /*  20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
 /*  Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
-/*  In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+/*  In the future, two mechanism shall be separated from each other and maintained independently. Thanks for Lanhsin's reminder. */
 		/* 92d do not need this */
 		if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
 			writeVal = 0x14141414;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
index bd8a9ae..8f43f49 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
@@ -332,7 +332,7 @@
 
 	/*  2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
 	/*  (1) The sequence number of each non-Qos frame / broadcast / multicast / */
-	/*  mgnt frame should be controled by Hw because Fw will also send null data */
+	/*  mgnt frame should be controlled by Hw because Fw will also send null data */
 	/*  which we cannot control when Fw LPS enable. */
 	/*  --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
 	/*  (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 5e656ce..cca9732 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -464,7 +464,7 @@
 /*-----------------------------------------------------------------------------
  * Function:	usb_AggSettingTxUpdate()
  *
- * Overview:	Seperate TX/RX parameters update independent for TP detection and
+ * Overview:	Separate TX/RX parameters update independent for TP detection and
  *			dynamic TX/RX aggreagtion parameters update.
  *
  * Input:			struct adapter *
@@ -473,7 +473,7 @@
  *
  * Revised History:
  *	When		Who		Remark
- *	12/10/2010	MHC		Seperate to smaller function.
+ *	12/10/2010	MHC		Separate to smaller function.
  *
  *---------------------------------------------------------------------------*/
 static void usb_AggSettingTxUpdate(struct adapter *Adapter)
@@ -496,7 +496,7 @@
 /*-----------------------------------------------------------------------------
  * Function:	usb_AggSettingRxUpdate()
  *
- * Overview:	Seperate TX/RX parameters update independent for TP detection and
+ * Overview:	Separate TX/RX parameters update independent for TP detection and
  *			dynamic TX/RX aggreagtion parameters update.
  *
  * Input:			struct adapter *
@@ -505,7 +505,7 @@
  *
  * Revised History:
  *	When		Who		Remark
- *	12/10/2010	MHC		Seperate to smaller function.
+ *	12/10/2010	MHC		Separate to smaller function.
  *
  *---------------------------------------------------------------------------*/
 static void
@@ -847,7 +847,7 @@
 
 	/*  */
 	/*  Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */
-	/*  Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */
+	/*  Hw bug which Hw initials RxFF boundary size to a value which is larger than the real Rx buffer size in 88E. */
 	/*  */
 	/*  Enable MACTXEN/MACRXEN block */
 	value16 = rtw_read16(Adapter, REG_CR);
diff --git a/drivers/staging/rtl8188eu/hal/usb_ops_linux.c b/drivers/staging/rtl8188eu/hal/usb_ops_linux.c
index bc56416..787763e 100644
--- a/drivers/staging/rtl8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/rtl8188eu/hal/usb_ops_linux.c
@@ -547,6 +547,8 @@
 		RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete : purb->status(%d) != 0\n", purb->status));
 
 		DBG_88E("###=> usb_read_port_complete => urb status(%d)\n", purb->status);
+		skb_put(precvbuf->pskb, purb->actual_length);
+		precvbuf->pskb = NULL;
 
 		if (rtw_inc_and_chk_continual_urb_error(adapter_to_dvobj(adapt)))
 			adapt->bSurpriseRemoved = true;
@@ -605,68 +607,68 @@
 		return _FAIL;
 	}
 
+	if (!precvbuf) {
+		RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
+			 ("usb_read_port:precvbuf==NULL\n"));
+		return _FAIL;
+	}
+
 	if ((!precvbuf->reuse) || (precvbuf->pskb == NULL)) {
 		precvbuf->pskb = skb_dequeue(&precvpriv->free_recv_skb_queue);
 		if (NULL != precvbuf->pskb)
 			precvbuf->reuse = true;
 	}
 
-	if (precvbuf != NULL) {
-		rtl8188eu_init_recvbuf(adapter, precvbuf);
+	rtl8188eu_init_recvbuf(adapter, precvbuf);
 
-		/* re-assign for linux based on skb */
-		if ((!precvbuf->reuse) || (precvbuf->pskb == NULL)) {
-			precvbuf->pskb = netdev_alloc_skb(adapter->pnetdev, MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);
-			if (precvbuf->pskb == NULL) {
-				RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("init_recvbuf(): alloc_skb fail!\n"));
-				DBG_88E("#### usb_read_port() alloc_skb fail!#####\n");
-				return _FAIL;
-			}
-
-			tmpaddr = (size_t)precvbuf->pskb->data;
-			alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1);
-			skb_reserve(precvbuf->pskb, (RECVBUFF_ALIGN_SZ - alignment));
-
-			precvbuf->phead = precvbuf->pskb->head;
-			precvbuf->pdata = precvbuf->pskb->data;
-			precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
-			precvbuf->pend = skb_end_pointer(precvbuf->pskb);
-			precvbuf->pbuf = precvbuf->pskb->data;
-		} else { /* reuse skb */
-			precvbuf->phead = precvbuf->pskb->head;
-			precvbuf->pdata = precvbuf->pskb->data;
-			precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
-			precvbuf->pend = skb_end_pointer(precvbuf->pskb);
-			precvbuf->pbuf = precvbuf->pskb->data;
-
-			precvbuf->reuse = false;
+	/* re-assign for linux based on skb */
+	if ((!precvbuf->reuse) || (precvbuf->pskb == NULL)) {
+		precvbuf->pskb = netdev_alloc_skb(adapter->pnetdev, MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);
+		if (precvbuf->pskb == NULL) {
+			RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("init_recvbuf(): alloc_skb fail!\n"));
+			DBG_88E("#### usb_read_port() alloc_skb fail!#####\n");
+			return _FAIL;
 		}
 
-		precvpriv->rx_pending_cnt++;
+		tmpaddr = (size_t)precvbuf->pskb->data;
+		alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1);
+		skb_reserve(precvbuf->pskb, (RECVBUFF_ALIGN_SZ - alignment));
 
-		purb = precvbuf->purb;
+		precvbuf->phead = precvbuf->pskb->head;
+		precvbuf->pdata = precvbuf->pskb->data;
+		precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
+		precvbuf->pend = skb_end_pointer(precvbuf->pskb);
+		precvbuf->pbuf = precvbuf->pskb->data;
+	} else { /* reuse skb */
+		precvbuf->phead = precvbuf->pskb->head;
+		precvbuf->pdata = precvbuf->pskb->data;
+		precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
+		precvbuf->pend = skb_end_pointer(precvbuf->pskb);
+		precvbuf->pbuf = precvbuf->pskb->data;
 
-		/* translate DMA FIFO addr to pipehandle */
-		pipe = ffaddr2pipehdl(pdvobj, addr);
+		precvbuf->reuse = false;
+	}
 
-		usb_fill_bulk_urb(purb, pusbd, pipe,
-				  precvbuf->pbuf,
-				  MAX_RECVBUF_SZ,
-				  usb_read_port_complete,
-				  precvbuf);/* context is precvbuf */
+	precvpriv->rx_pending_cnt++;
 
-		err = usb_submit_urb(purb, GFP_ATOMIC);
-		if ((err) && (err != (-EPERM))) {
-			RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
-				 ("cannot submit rx in-token(err=0x%.8x), URB_STATUS =0x%.8x",
-				 err, purb->status));
-			DBG_88E("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",
-				err, purb->status);
-			ret = _FAIL;
-		}
-	} else {
+	purb = precvbuf->purb;
+
+	/* translate DMA FIFO addr to pipehandle */
+	pipe = ffaddr2pipehdl(pdvobj, addr);
+
+	usb_fill_bulk_urb(purb, pusbd, pipe,
+			  precvbuf->pbuf,
+			  MAX_RECVBUF_SZ,
+			  usb_read_port_complete,
+			  precvbuf);/* context is precvbuf */
+
+	err = usb_submit_urb(purb, GFP_ATOMIC);
+	if ((err) && (err != (-EPERM))) {
 		RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
-			 ("usb_read_port:precvbuf ==NULL\n"));
+			 ("cannot submit rx in-token(err=0x%.8x), URB_STATUS =0x%.8x",
+			 err, purb->status));
+		DBG_88E("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",
+			err, purb->status);
 		ret = _FAIL;
 	}
 
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h b/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
deleted file mode 100644
index 949c33b..0000000
--- a/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/******************************************************************************
-*
-* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of version 2 of the GNU General Public License as
-* published by the Free Software Foundation.
-*
-* This program is distributed in the hope that it will be useful, but WITHOUT
-* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-* more details.
-*
-* You should have received a copy of the GNU General Public License along with
-* this program; if not, write to the Free Software Foundation, Inc.,
-* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
-*
-*
-******************************************************************************/
-#ifndef __INC_HAL8188E_FW_IMG_H
-#define __INC_HAL8188E_FW_IMG_H
-
-/* V10(1641) */
-#define Rtl8188EFWImgArrayLength 13904
-
-extern const u8 Rtl8188EFwImgArray[Rtl8188EFWImgArrayLength];
-
-#endif /* __INC_HAL8188E_FW_IMG_H */
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
index c4769e2..25cae81 100644
--- a/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
@@ -75,7 +75,7 @@
 
 #define MAX_PG_GROUP 13
 
-#define	RF_PATH_MAX			2
+#define	RF_PATH_MAX			3
 #define		MAX_RF_PATH		RF_PATH_MAX
 #define		MAX_TX_COUNT		4 /* path numbers */
 
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
index 0e06d29..9f2969b 100644
--- a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
@@ -26,7 +26,7 @@
 /*  2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
 /*  3. RF register 0x00-2E */
 /*  4. Bit Mask for BB/RF register */
-/*  5. Other defintion for BB/RF R/W */
+/*  5. Other definition for BB/RF R/W */
 /*  */
 
 
diff --git a/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h b/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
index fa583f2..287e9f9 100644
--- a/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
+++ b/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
@@ -45,8 +45,6 @@
 void PHY_LCCalibrate_8188E(struct adapter *pAdapter);
 
 /*  AP calibrate */
-void PHY_APCalibrate_8188E(struct adapter *pAdapter, s8 delta);
-
 void PHY_DigitalPredistortion_8188E(struct adapter *pAdapter);
 
 void _PHY_SaveADDARegisters(struct adapter *pAdapter, u32 *ADDAReg,
diff --git a/drivers/staging/rtl8188eu/include/ieee80211.h b/drivers/staging/rtl8188eu/include/ieee80211.h
index cd37ea4..c4d38d1 100644
--- a/drivers/staging/rtl8188eu/include/ieee80211.h
+++ b/drivers/staging/rtl8188eu/include/ieee80211.h
@@ -306,8 +306,8 @@
 };
 
 struct rtw_ieee80211_hdr {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
@@ -316,8 +316,8 @@
 } __packed;
 
 struct rtw_ieee80211_hdr_3addr {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
@@ -325,8 +325,8 @@
 } __packed;
 
 struct rtw_ieee80211_hdr_qos {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
@@ -336,8 +336,8 @@
 }  __packed;
 
 struct rtw_ieee80211_hdr_3addr_qos {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
diff --git a/drivers/staging/rtl8188eu/include/odm.h b/drivers/staging/rtl8188eu/include/odm.h
index 4787bac..eaa4bc1 100644
--- a/drivers/staging/rtl8188eu/include/odm.h
+++ b/drivers/staging/rtl8188eu/include/odm.h
@@ -283,8 +283,6 @@
 
 /*  Declare for common info */
 
-#define MAX_PATH_NUM_92CS	2
-
 struct odm_phy_status_info {
 	u8	RxPWDBAll;
 	u8	SignalQuality;	 /*  in 0-100 index. */
@@ -950,7 +948,7 @@
 	struct timer_list FastAntTrainingTimer;
 };		/*  DM_Dynamic_Mechanism_Structure */
 
-#define ODM_RF_PATH_MAX 2
+#define ODM_RF_PATH_MAX 3
 
 enum ODM_RF_RADIO_PATH {
 	ODM_RF_PATH_A = 0,   /* Radio Path A */
diff --git a/drivers/staging/rtl8188eu/include/odm_HWConfig.h b/drivers/staging/rtl8188eu/include/odm_HWConfig.h
index 63779f5..df52722 100644
--- a/drivers/staging/rtl8188eu/include/odm_HWConfig.h
+++ b/drivers/staging/rtl8188eu/include/odm_HWConfig.h
@@ -69,7 +69,7 @@
 };
 
 struct phy_status_rpt {
-	struct phy_rx_agc_info path_agc[2];
+	struct phy_rx_agc_info path_agc[3];
 	u8	ch_corr[2];
 	u8	cck_sig_qual_ofdm_pwdb_all;
 	u8	cck_agc_rpt_ofdm_cfosho_a;
@@ -79,7 +79,7 @@
 	u8	path_cfotail[2];
 	u8	pcts_mask[2];
 	s8	stream_rxevm[2];
-	u8	path_rxsnr[2];
+	u8	path_rxsnr[3];
 	u8	noise_power_db_lsb;
 	u8	rsvd_2[3];
 	u8	stream_csi[2];
diff --git a/drivers/staging/rtl8188eu/include/odm_debug.h b/drivers/staging/rtl8188eu/include/odm_debug.h
index a9ba6df..622f4c1 100644
--- a/drivers/staging/rtl8188eu/include/odm_debug.h
+++ b/drivers/staging/rtl8188eu/include/odm_debug.h
@@ -27,7 +27,7 @@
 /*	Define the debug levels */
 /*  */
 /*	1. DBG_TRACE and DBG_LOUD are used for normal cases. */
-/*	They can help SW engineer to develope or trace states changed */
+/*	They can help SW engineer to develop or trace states changed */
 /*	and also help HW enginner to trace every operation to and from HW, */
 /*	e.g IO, Tx, Rx. */
 /*  */
diff --git a/drivers/staging/rtl8188eu/include/odm_precomp.h b/drivers/staging/rtl8188eu/include/odm_precomp.h
index 520cbba..d1d95f4 100644
--- a/drivers/staging/rtl8188eu/include/odm_precomp.h
+++ b/drivers/staging/rtl8188eu/include/odm_precomp.h
@@ -31,11 +31,6 @@
 #include <drv_types.h>
 #include <hal_intf.h>
 
-/* 2 Hardware Parameter Files */
-
-#include "Hal8188EFWImg_CE.h"
-
-
 /* 2 OutSrc Header Files */
 
 #include "odm.h"
diff --git a/drivers/staging/rtl8188eu/include/rtw_cmd.h b/drivers/staging/rtl8188eu/include/rtw_cmd.h
index 819285b..8cafd7a 100644
--- a/drivers/staging/rtl8188eu/include/rtw_cmd.h
+++ b/drivers/staging/rtl8188eu/include/rtw_cmd.h
@@ -745,7 +745,7 @@
 
 Result:
 0x00: success
-0x01: sucess, and check Response.
+0x01: success, and check Response.
 0x02: cmd ignored due to duplicated sequcne number
 0x03: cmd dropped due to invalid cmd code
 0x04: reserved.
diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index 2e61804..d0da4fd 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -163,14 +163,14 @@
 void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE	LedAction);
 
 struct led_priv{
-	/* add for led controll */
+	/* add for led control */
 	struct LED_871x			SwLed0;
 	struct LED_871x			SwLed1;
 	enum LED_STRATEGY_871x	LedStrategy;
 	u8	bRegUseLed;
 	void (*LedControlHandler)(struct adapter *padapter,
 				  enum LED_CTL_MODE LedAction);
-	/* add for led controll */
+	/* add for led control */
 };
 
 #define rtw_led_control(adapt, action) \
diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme.h b/drivers/staging/rtl8188eu/include/rtw_mlme.h
index 22538e6..4a7143e 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mlme.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mlme.h
@@ -53,11 +53,11 @@
 #define	WIFI_SITE_MONITOR		0x00000800	/* to indicate the station is under site surveying */
 
 #define	WIFI_MP_STATE			0x00010000
-#define	WIFI_MP_CTX_BACKGROUND		0x00020000	/*  in continous tx background */
-#define	WIFI_MP_CTX_ST			0x00040000	/*  in continous tx with single-tone */
-#define	WIFI_MP_CTX_BACKGROUND_PENDING	0x00080000	/*  pending in continous tx background due to out of skb */
-#define	WIFI_MP_CTX_CCK_HW		0x00100000	/*  in continous tx */
-#define	WIFI_MP_CTX_CCK_CS		0x00200000	/*  in continous tx with carrier suppression */
+#define	WIFI_MP_CTX_BACKGROUND		0x00020000	/*  in continuous tx background */
+#define	WIFI_MP_CTX_ST			0x00040000	/*  in continuous tx with single-tone */
+#define	WIFI_MP_CTX_BACKGROUND_PENDING	0x00080000	/*  pending in continuous tx background due to out of skb */
+#define	WIFI_MP_CTX_CCK_HW		0x00100000	/*  in continuous tx */
+#define	WIFI_MP_CTX_CCK_CS		0x00200000	/*  in continuous tx with carrier suppression */
 #define WIFI_MP_LPBK_STATE		0x00400000
 
 #define _FW_UNDER_LINKING	WIFI_UNDER_LINKING
@@ -239,7 +239,7 @@
 	u8 profileindex; /* Used to point to the index of profileinfo array */
 	u8 peer_operating_ch;
 	u8 find_phase_state_exchange_cnt;
-	/* The device password ID for group negotation */
+	/* The device password ID for group negotiation */
 	u16 device_password_id_for_nego;
 	u8 negotiation_dialog_token;
 	/* SSID information for group negotitation */
diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
index 853ab80..b1bfa2e 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
@@ -107,7 +107,7 @@
 /*  Note: */
 /*	We just add new channel plan when the new channel plan is different
  *      from any of the following channel plan. */
-/*	If you just wnat to customize the acitions(scan period or join actions)
+/*	If you just want to customize the actions(scan period or join actions)
  *      about one of the channel plan, */
 /*	customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
 enum RT_CHANNEL_DOMAIN {
diff --git a/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h b/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h
index 3ad2207..30fd17f 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h
@@ -56,7 +56,7 @@
 /*  2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
 /*  3. RF register 0x00-2E */
 /*  4. Bit Mask for BB/RF register */
-/*  5. Other defintion for BB/RF R/W */
+/*  5. Other definition for BB/RF R/W */
 /*  */
 
 
diff --git a/drivers/staging/rtl8188eu/include/rtw_recv.h b/drivers/staging/rtl8188eu/include/rtw_recv.h
index bae8885..be9c30c 100644
--- a/drivers/staging/rtl8188eu/include/rtw_recv.h
+++ b/drivers/staging/rtl8188eu/include/rtw_recv.h
@@ -83,7 +83,7 @@
 	u32	total_num;		/* num of valid elements */
 	u32	total_val;		/* sum of valid elements */
 };
-#define MAX_PATH_NUM_92CS		2
+#define MAX_PATH_NUM_92CS		3
 struct phy_info {
 	u8	RxPWDBAll;
 	u8	SignalQuality;	 /*  in 0-100 index. */
diff --git a/drivers/staging/rtl8188eu/include/rtw_rf.h b/drivers/staging/rtl8188eu/include/rtw_rf.h
index 089ecee..2df8837 100644
--- a/drivers/staging/rtl8188eu/include/rtw_rf.h
+++ b/drivers/staging/rtl8188eu/include/rtw_rf.h
@@ -119,7 +119,7 @@
 };
 
 /*  */
-/*  Represent Extention Channel Offset in HT Capabilities */
+/*  Represent Extension Channel Offset in HT Capabilities */
 /*  This is available only in 40Mhz mode. */
 /*  */
 enum ht_extchnl_offset {
diff --git a/drivers/staging/rtl8188eu/include/sta_info.h b/drivers/staging/rtl8188eu/include/sta_info.h
index 3ed2a39..3e909db 100644
--- a/drivers/staging/rtl8188eu/include/sta_info.h
+++ b/drivers/staging/rtl8188eu/include/sta_info.h
@@ -338,7 +338,7 @@
 	 */
 	struct sta_info *sta_aid[NUM_STA];
 
-	u16 sta_dz_bitmap;/* only support 15 stations, staion aid bitmap
+	u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap
 			   * for sleeping sta. */
 	u16 tim_bitmap;	/* only support 15 stations, aid=0~15 mapping
 			 * bit0~bit15 */
diff --git a/drivers/staging/rtl8188eu/include/wifi.h b/drivers/staging/rtl8188eu/include/wifi.h
index a615659..84e5199 100644
--- a/drivers/staging/rtl8188eu/include/wifi.h
+++ b/drivers/staging/rtl8188eu/include/wifi.h
@@ -984,7 +984,7 @@
 #define	P2P_PROVISION_TIMEOUT		5000
 /* 3 seconds timeout for sending the prov disc request concurrent mode */
 #define	P2P_CONCURRENT_PROVISION_TIME	3000
-/* 5 seconds timeout for receiving the group negotation response */
+/* 5 seconds timeout for receiving the group negotiation response */
 #define	P2P_GO_NEGO_TIMEOUT		5000
 /* 3 seconds timeout for sending the negotiation request under concurrent mode */
 #define	P2P_CONCURRENT_GO_NEGO_TIME	3000
diff --git a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
index 95953eb..ae54587 100644
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
@@ -938,7 +938,7 @@
 	memcpy(strIssueBssid, pPMK->bssid.sa_data, ETH_ALEN);
 	if (pPMK->cmd == IW_PMKSA_ADD) {
 		DBG_88E("[rtw_wx_set_pmkid] IW_PMKSA_ADD!\n");
-		if (!memcmp(strIssueBssid, strZeroMacAddress, ETH_ALEN) == true)
+		if (!memcmp(strIssueBssid, strZeroMacAddress, ETH_ALEN))
 			return ret;
 		else
 			ret = true;
@@ -1039,7 +1039,7 @@
 
 	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
 	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
-	range->avg_qual.level = 20 + -98;
+	range->avg_qual.level = 178; /* -78 dBm */
 	range->avg_qual.noise = 0;
 	range->avg_qual.updated = 7; /* Updated all three */
 
@@ -1074,7 +1074,7 @@
 
 /*  The following code will proivde the security capability to network manager. */
 /*  If the driver doesn't provide this capability to network manager, */
-/*  the WPA/WPA2 routers can't be choosen in the network manager. */
+/*  the WPA/WPA2 routers can't be chosen in the network manager. */
 
 /*
 #define IW_SCAN_CAPA_NONE		0x00
@@ -1373,7 +1373,7 @@
 				}
 			}
 
-			/* it has still some scan paramater to parse, we only do this now... */
+			/* it has still some scan parameter to parse, we only do this now... */
 			_status = rtw_set_802_11_bssid_list_scan(padapter, ssid, RTW_SSID_SCAN_AMOUNT);
 		} else {
 			_status = rtw_set_802_11_bssid_list_scan(padapter, NULL, 0);
@@ -2626,7 +2626,7 @@
 			return -EINVAL;
 		}
 
-		if (!memcmp(bssid, pnetwork->network.MacAddress, ETH_ALEN) == true) {
+		if (!memcmp(bssid, pnetwork->network.MacAddress, ETH_ALEN)) {
 			/* BSSID match, then check if supporting wpa/wpa2 */
 			DBG_88E("BSSID:%pM\n", (bssid));
 
@@ -2961,7 +2961,7 @@
 
 /*	Commented by Albert 20110520 */
 /*	This function will return the config method description */
-/*	This config method description will show us which config method the remote P2P device is intented to use */
+/*	This config method description will show us which config method the remote P2P device is intended to use */
 /*	by sending the provisioning discovery request frame. */
 
 static int rtw_p2p_get_req_cm(struct net_device *dev,
@@ -3413,7 +3413,7 @@
 	/*  +8 is for the str "InvProc =", we have to clear it at wrqu->data.pointer */
 
 	/*	Commented by Ouden 20121226 */
-	/*	The application wants to know P2P initation procedure is support or not. */
+	/*	The application wants to know P2P initiation procedure is supported or not. */
 	/*	Format: iwpriv wlanx p2p_get2 InvProc = 00:E0:4C:00:00:05 */
 
 	DBG_88E("[%s] data = %s\n", __func__, (char *)extra);
@@ -4040,7 +4040,7 @@
 	if (0 != ret)
 		goto exit;
 
-	if (!memcmp(rereg_priv->old_ifname, "disable%d", 9) == true) {
+	if (!memcmp(rereg_priv->old_ifname, "disable%d", 9)) {
 		padapter->ledpriv.bRegUseLed = rereg_priv->old_bRegUseLed;
 		rtw_hal_sw_led_init(padapter);
 		rtw_ips_mode_req(&padapter->pwrctrlpriv, rereg_priv->old_ips_mode);
@@ -4049,7 +4049,7 @@
 	strncpy(rereg_priv->old_ifname, new_ifname, IFNAMSIZ);
 	rereg_priv->old_ifname[IFNAMSIZ-1] = 0;
 
-	if (!memcmp(new_ifname, "disable%d", 9) == true) {
+	if (!memcmp(new_ifname, "disable%d", 9)) {
 		DBG_88E("%s disable\n", __func__);
 		/*  free network queue for Android's timming issue */
 		rtw_free_network_queue(padapter, true);
@@ -4884,7 +4884,6 @@
 	case _TKIP_:
 	case _TKIP_WTMIC_:
 	case _AES_:
-		keylen = 16;
 	default:
 		keylen = 16;
 	}
@@ -6146,7 +6145,7 @@
 
 		for (jj = 0, kk = 0; jj < cnts; jj++, kk += 2)
 			setdata[jj] = key_2char2num(tmp[2][kk], tmp[2][kk + 1]);
-		/* Change to check TYPE_EFUSE_MAP_LEN, beacuse 8188E raw 256, logic map over 256. */
+		/* Change to check TYPE_EFUSE_MAP_LEN, because 8188E raw 256, logic map over 256. */
 		EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&max_available_size, false);
 		if ((addr+cnts) > max_available_size) {
 			DBG_88E("%s: addr(0x%X)+cnts(%d) parameter error!\n", __func__, addr, cnts);
@@ -6221,7 +6220,7 @@
 
 		for (jj = 0, kk = 0; jj < cnts; jj++, kk += 2)
 			setdata[jj] = key_2char2num(tmp[1][kk], tmp[1][kk + 1]);
-		/* Change to check TYPE_EFUSE_MAP_LEN, beacuse 8188E raw 256, logic map over 256. */
+		/* Change to check TYPE_EFUSE_MAP_LEN, because 8188E raw 256, logic map over 256. */
 		EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&max_available_size, false);
 		if ((addr+cnts) > max_available_size) {
 			DBG_88E("%s: addr(0x%X)+cnts(%d) parameter error!\n", __func__, addr, cnts);
diff --git a/drivers/staging/rtl8188eu/os_dep/os_intfs.c b/drivers/staging/rtl8188eu/os_dep/os_intfs.c
index 63bc913..17659bb 100644
--- a/drivers/staging/rtl8188eu/os_dep/os_intfs.c
+++ b/drivers/staging/rtl8188eu/os_dep/os_intfs.c
@@ -85,7 +85,7 @@
 static int rtw_uapsd_acvo_en;
 
 int rtw_ht_enable = 1;
-int rtw_cbw40_enable = 3; /*  0 :diable, bit(0): enable 2.4g, bit(1): enable 5g */
+int rtw_cbw40_enable = 3; /*  0 :disable, bit(0): enable 2.4g, bit(1): enable 5g */
 int rtw_ampdu_enable = 1;/* for enable tx_ampdu */
 static int rtw_rx_stbc = 1;/*  0: disable, bit(0):enable 2.4g, bit(1):enable 5g, default is set to enable 2.4GHZ for IOT issue with bufflao's AP at 5GHZ */
 static int rtw_ampdu_amsdu;/*  0: disabled, 1:enabled, 2:auto */
@@ -707,6 +707,10 @@
 	return 0;
 }
 
+static const struct device_type wlan_type = {
+	.name = "wlan",
+};
+
 struct net_device *rtw_init_netdev(struct adapter *old_padapter)
 {
 	struct adapter *padapter;
@@ -722,6 +726,7 @@
 	if (!pnetdev)
 		return NULL;
 
+	pnetdev->dev.type = &wlan_type;
 	padapter = rtw_netdev_priv(pnetdev);
 	padapter->pnetdev = pnetdev;
 	DBG_88E("register rtw_netdev_ops to netdev_ops\n");
diff --git a/drivers/staging/rtl8188eu/os_dep/osdep_service.c b/drivers/staging/rtl8188eu/os_dep/osdep_service.c
index 4e0bfb7..5a9e9e4 100644
--- a/drivers/staging/rtl8188eu/os_dep/osdep_service.c
+++ b/drivers/staging/rtl8188eu/os_dep/osdep_service.c
@@ -627,13 +627,14 @@
 int rtw_change_ifname(struct adapter *padapter, const char *ifname)
 {
 	struct net_device *pnetdev;
-	struct net_device *cur_pnetdev = padapter->pnetdev;
+	struct net_device *cur_pnetdev;
 	struct rereg_nd_name_data *rereg_priv;
 	int ret;
 
 	if (!padapter)
 		goto error;
 
+	cur_pnetdev = padapter->pnetdev;
 	rereg_priv = &padapter->rereg_nd_name_priv;
 
 	/* free the old_pnetdev */
@@ -794,7 +795,7 @@
 }
 
 /**
- * rtw_cbuf_alloc - allocte a rtw_cbuf with given size and do initialization
+ * rtw_cbuf_alloc - allocate a rtw_cbuf with given size and do initialization
  * @size: size of pointer
  *
  * Returns: pointer of srtuct rtw_cbuf, NULL for allocation failure
diff --git a/drivers/staging/rtl8188eu/os_dep/recv_linux.c b/drivers/staging/rtl8188eu/os_dep/recv_linux.c
index e2f4e7d..3852ff4 100644
--- a/drivers/staging/rtl8188eu/os_dep/recv_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/recv_linux.c
@@ -77,8 +77,7 @@
 int rtw_os_recvbuf_resource_free(struct adapter *padapter,
 				 struct recv_buf *precvbuf)
 {
-	if (precvbuf->purb)
-		usb_free_urb(precvbuf->purb);
+	usb_free_urb(precvbuf->purb);
 	return _SUCCESS;
 }
 
@@ -224,8 +223,7 @@
 _recv_indicatepkt_drop:
 
 	 /* enqueue back to free_recv_queue */
-	if (precv_frame)
-		rtw_free_recvframe(precv_frame, pfree_recv_queue);
+	rtw_free_recvframe(precv_frame, pfree_recv_queue);
 
 _func_exit_;
 	 return _FAIL;
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index 9ca3180..7d14779 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -737,7 +737,7 @@
 	status = _SUCCESS;
 
 free_hal_data:
-	if (status != _SUCCESS && padapter->HalData)
+	if (status != _SUCCESS)
 		kfree(padapter->HalData);
 handle_dualmac:
 	if (status != _SUCCESS)
diff --git a/drivers/staging/rtl8192e/dot11d.c b/drivers/staging/rtl8192e/dot11d.c
index f7b14f8b..1260f10 100644
--- a/drivers/staging/rtl8192e/dot11d.c
+++ b/drivers/staging/rtl8192e/dot11d.c
@@ -151,7 +151,7 @@
 			MaxChnlNum = pTriple->FirstChnl + j;
 		}
 
-		pTriple = (struct chnl_txpow_triple *)((u8*)pTriple + 3);
+		pTriple = (struct chnl_txpow_triple *)((u8 *)pTriple + 3);
 	}
 
 	UPDATE_CIE_SRC(dev, pTaddr);
diff --git a/drivers/staging/rtl8192e/dot11d.h b/drivers/staging/rtl8192e/dot11d.h
index 71f4549..fb7683f 100644
--- a/drivers/staging/rtl8192e/dot11d.h
+++ b/drivers/staging/rtl8192e/dot11d.h
@@ -38,7 +38,7 @@
 /**
  * struct rt_dot11d_info * @CountryIeLen: value greater than 0 if @CountryIeBuf contains
  *		  valid country information element.
- * @chanell_map: holds channel values
+ * @channel_map: holds channel values
  *		0 - invalid,
  *		1 - valid (active scan),
  *		2 - valid (passive scan)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8190P_rtl8256.c b/drivers/staging/rtl8192e/rtl8192e/r8190P_rtl8256.c
index 0da56c8..5af1c19 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8190P_rtl8256.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8190P_rtl8256.c
@@ -140,7 +140,7 @@
 
 		rtStatus = rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF,
 						(enum rf90_radio_path)eRFPath);
-		if (rtStatus != true) {
+		if (!rtStatus) {
 			RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check "
 				 "Radio[%d] Fail!!\n", eRFPath);
 			goto phy_RF8256_Config_ParaFile_Fail;
@@ -245,7 +245,7 @@
 	struct r8192_priv *priv = rtllib_priv(dev);
 
 	TxAGC = powerlevel;
-	if (priv->bDynamicTxLowPower == true) {
+	if (priv->bDynamicTxLowPower) {
 		if (priv->CustomerID == RT_CID_819x_Netcore)
 			TxAGC = 0x22;
 		else
@@ -294,7 +294,7 @@
 			priv->Pwr_Track = writeVal_tmp;
 		}
 
-		if (priv->bDynamicTxHighPower == true)
+		if (priv->bDynamicTxHighPower)
 			writeVal = 0x03030303;
 		else
 			writeVal = (byte3 << 24) | (byte2 << 16) |
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
index 74fbd70..2cace9a 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -720,7 +720,7 @@
 	}
 	priv->pFirmware->firmware_status = FW_STATUS_0_INIT;
 
-	if (priv->RegRfOff == true)
+	if (priv->RegRfOff)
 		priv->rtllib->eRFPowerState = eRfOff;
 
 	ulRegRead = read_nic_dword(dev, CPU_GEN);
@@ -745,7 +745,7 @@
 	}
 	RT_TRACE(COMP_INIT, "BB Config Start!\n");
 	rtStatus = rtl8192_BBConfig(dev);
-	if (rtStatus != true) {
+	if (!rtStatus) {
 		RT_TRACE(COMP_ERR, "BB Config failed\n");
 		return rtStatus;
 	}
@@ -856,7 +856,7 @@
 	if (priv->ResetProgress == RESET_TYPE_NORESET) {
 		RT_TRACE(COMP_INIT, "RF Config Started!\n");
 		rtStatus = rtl8192_phy_RFConfig(dev);
-		if (rtStatus != true) {
+		if (!rtStatus) {
 			RT_TRACE(COMP_ERR, "RF Config failed\n");
 			return rtStatus;
 		}
@@ -869,7 +869,7 @@
 
 	write_nic_byte(dev, 0x87, 0x0);
 
-	if (priv->RegRfOff == true) {
+	if (priv->RegRfOff) {
 		RT_TRACE((COMP_INIT | COMP_RF | COMP_POWER),
 			  "%s(): Turn off RF for RegRfOff ----------\n",
 			  __func__);
@@ -1184,7 +1184,7 @@
 						cb_desc);
 
 	if (pci_dma_mapping_error(priv->pdev, mapping))
-		RT_TRACE(COMP_ERR, "DMA Mapping error\n");;
+		RT_TRACE(COMP_ERR, "DMA Mapping error\n");
 	if (cb_desc->bAMPDUEnable) {
 		pTxFwInfo->AllowAggregation = 1;
 		pTxFwInfo->RxMF = cb_desc->ampdu_factor;
@@ -1283,7 +1283,7 @@
 			 PCI_DMA_TODEVICE);
 
 	if (pci_dma_mapping_error(priv->pdev, mapping))
-		RT_TRACE(COMP_ERR, "DMA Mapping error\n");;
+		RT_TRACE(COMP_ERR, "DMA Mapping error\n");
 	memset(entry, 0, 12);
 	entry->LINIP = cb_desc->bLastIniPkt;
 	entry->FirstSeg = 1;
@@ -1866,15 +1866,15 @@
 	type = WLAN_FC_GET_TYPE(fc);
 	praddr = hdr->addr1;
 
-	bpacket_match_bssid = ((RTLLIB_FTYPE_CTL != type) &&
-			(!compare_ether_addr(priv->rtllib->
-			current_network.bssid,
-			   (fc & RTLLIB_FCTL_TODS) ? hdr->addr1 :
-			   (fc & RTLLIB_FCTL_FROMDS) ? hdr->addr2 : hdr->addr3))
-		&& (!pstats->bHwError) && (!pstats->bCRC) && (!pstats->bICV));
-	bpacket_toself =  bpacket_match_bssid &&	/* check this */
-			  (!compare_ether_addr(praddr,
-			  priv->rtllib->dev->dev_addr));
+	bpacket_match_bssid =
+		((RTLLIB_FTYPE_CTL != type) &&
+		 ether_addr_equal(priv->rtllib->current_network.bssid,
+				  (fc & RTLLIB_FCTL_TODS) ? hdr->addr1 :
+				  (fc & RTLLIB_FCTL_FROMDS) ? hdr->addr2 :
+				  hdr->addr3) &&
+		 (!pstats->bHwError) && (!pstats->bCRC) && (!pstats->bICV));
+	bpacket_toself = bpacket_match_bssid &&		/* check this */
+			 ether_addr_equal(praddr, priv->rtllib->dev->dev_addr);
 	if (WLAN_FC_GET_FRAMETYPE(fc) == RTLLIB_STYPE_BEACON)
 		bPacketBeacon = true;
 	if (bpacket_match_bssid)
@@ -2213,7 +2213,7 @@
 	priv->MidHighPwrTHR_L2 = 0x40;
 	priv->PwrDomainProtect = false;
 
-	priv->bfirst_after_down = 0;
+	priv->bfirst_after_down = false;
 }
 
 void rtl8192_EnableInterrupt(struct net_device *dev)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
index dd2a96b..abcd22f 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
@@ -329,7 +329,7 @@
 		}
 
 		rt_status = fw_download_code(dev, mapped_file, file_length);
-		if (rt_status != true) {
+		if (!rt_status) {
 			goto download_firmware_fail;
 		}
 
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
index 9676c59..21e6ddd 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
@@ -567,7 +567,7 @@
 		rtStatus  = rtl8192_phy_checkBBAndRF(dev,
 					 (enum hw90_block)eCheckItem,
 					 (enum rf90_radio_path)0);
-		if (rtStatus != true) {
+		if (!rtStatus) {
 			RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():"
 				 "Check PHY%d Fail!!\n", eCheckItem-1);
 			return rtStatus;
@@ -1425,7 +1425,7 @@
 	u8	i = 0, QueueID = 0;
 	struct rtl8192_tx_ring  *ring = NULL;
 
-	if (priv->SetRFPowerStateInProgress == true)
+	if (priv->SetRFPowerStateInProgress)
 		return false;
 	RT_TRACE(COMP_PS, "===========> SetRFPowerState8190()!\n");
 	priv->SetRFPowerStateInProgress = true;
@@ -1443,10 +1443,9 @@
 					InitilizeCount--;
 					priv->RegRfOff = false;
 					rtstatus = NicIFEnableNIC(dev);
-				} while ((rtstatus != true) &&
-					 (InitilizeCount > 0));
+				} while (!rtstatus && (InitilizeCount > 0));
 
-				if (rtstatus != true) {
+				if (!rtstatus) {
 					RT_TRACE(COMP_ERR, "%s():Initialize Ada"
 						 "pter fail,return\n",
 						 __func__);
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index e068443..d93caca 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -370,8 +370,7 @@
 	case eRfOn:
 		priv->rtllib->RfOffReason &= (~ChangeSource);
 
-		if ((ChangeSource == RF_CHANGE_BY_HW) &&
-		    (priv->bHwRadioOff == true))
+		if ((ChangeSource == RF_CHANGE_BY_HW) && priv->bHwRadioOff)
 			priv->bHwRadioOff = false;
 
 		if (!priv->rtllib->RfOffReason) {
@@ -405,8 +404,7 @@
 						      disas_lv_ss);
 			}
 		}
-		if ((ChangeSource == RF_CHANGE_BY_HW) &&
-		     (priv->bHwRadioOff == false))
+		if ((ChangeSource == RF_CHANGE_BY_HW) && !priv->bHwRadioOff)
 			priv->bHwRadioOff = true;
 		priv->rtllib->RfOffReason |= ChangeSource;
 		bActionAllowed = true;
@@ -428,7 +426,7 @@
 		PHY_SetRFPowerState(dev, StateToSet);
 		if (StateToSet == eRfOn) {
 
-			if (bConnectBySSID && (priv->blinked_ingpio == true)) {
+			if (bConnectBySSID && priv->blinked_ingpio) {
 				queue_delayed_work_rsl(ieee->wq,
 					 &ieee->associate_procedure_wq, 0);
 				priv->blinked_ingpio = false;
@@ -955,7 +953,7 @@
 	RT_TRACE(COMP_INIT, "Bringing up iface");
 	priv->bfirst_init = true;
 	init_status = priv->ops->initialize_adapter(dev);
-	if (init_status != true) {
+	if (!init_status) {
 		RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization is failed!\n",
 			 __func__);
 		priv->bfirst_init = false;
@@ -1000,7 +998,7 @@
 	priv->bDriverIsGoingToUnload = true;
 	priv->up = 0;
 	priv->rtllib->ieee_up = 0;
-	priv->bfirst_after_down = 1;
+	priv->bfirst_after_down = true;
 	RT_TRACE(COMP_DOWN, "==========>%s()\n", __func__);
 	if (!netif_queue_stopped(dev))
 		netif_stop_queue(dev);
@@ -1119,8 +1117,8 @@
 	priv->rtllib->hwscan_sem_up = 1;
 	priv->rtllib->status = 0;
 	priv->H2CTxCmdSeq = 0;
-	priv->bDisableFrameBursting = 0;
-	priv->bDMInitialGainEnable = 1;
+	priv->bDisableFrameBursting = false;
+	priv->bDMInitialGainEnable = true;
 	priv->polling_timer_on = 0;
 	priv->up_first_time = 1;
 	priv->blinked_ingpio = false;
@@ -1162,7 +1160,7 @@
 	priv->CckPwEnl = 6;
 	priv->ScanDelay = 50;
 	priv->ResetProgress = RESET_TYPE_NORESET;
-	priv->bForcedSilentReset = 0;
+	priv->bForcedSilentReset = false;
 	priv->bDisableNormalResetCheck = false;
 	priv->force_reset = false;
 	memset(priv->rtllib->swcamtable, 0, sizeof(struct sw_cam_table) * 32);
@@ -1171,7 +1169,7 @@
 	priv->RxCounter = 0;
 	priv->rtllib->wx_set_enc = 0;
 	priv->bHwRadioOff = false;
-	priv->RegRfOff = 0;
+	priv->RegRfOff = false;
 	priv->isRFOff = false;
 	priv->bInPowerSaveMode = false;
 	priv->rtllib->RfOffReason = 0;
@@ -1647,7 +1645,7 @@
 	bool	bHigherBusyRxTraffic = false;
 	bool bEnterPS = false;
 
-	if (IS_NIC_DOWN(priv) || (priv->bHwRadioOff == true))
+	if (IS_NIC_DOWN(priv) || priv->bHwRadioOff)
 		return;
 
 	if (priv->rtllib->state >= RTLLIB_LINKED) {
@@ -1888,9 +1886,8 @@
 	memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
 	skb_push(skb, priv->rtllib->tx_headroom);
 	ret = rtl8192_tx(dev, skb);
-	if (ret != 0) {
+	if (ret != 0)
 		kfree_skb(skb);
-	};
 
 	if (queue_index != MGNT_QUEUE) {
 		priv->rtllib->stats.tx_bytes += (skb->len -
@@ -1898,7 +1895,6 @@
 		priv->rtllib->stats.tx_packets++;
 	}
 
-
 	return;
 }
 
@@ -1930,15 +1926,11 @@
 		tcb_desc->bTxEnableFwCalcDur = 1;
 		skb_push(skb, priv->rtllib->tx_headroom);
 		ret = rtl8192_tx(dev, skb);
-		if (ret != 0) {
+		if (ret != 0)
 			kfree_skb(skb);
-		};
 	}
 
-
-
 	return ret;
-
 }
 
 static void rtl8192_tx_isr(struct net_device *dev, int prio)
@@ -2601,14 +2593,9 @@
 			goto out;
 		}
 
-		ipw = kmalloc(p->length, GFP_KERNEL);
-		if (ipw == NULL) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		if (copy_from_user(ipw, p->pointer, p->length)) {
-			kfree(ipw);
-			ret = -EFAULT;
+		ipw = memdup_user(p->pointer, p->length);
+		if (IS_ERR(ipw)) {
+			ret = PTR_ERR(ipw);
 			goto out;
 		}
 
@@ -2982,7 +2969,6 @@
 	free_rtllib(dev);
 
 	DMESG("wlan driver load failed\n");
-	pci_set_drvdata(pdev, NULL);
 err_pci_disable:
 	pci_disable_device(pdev);
 	return err;
@@ -3052,7 +3038,7 @@
 	RT_TRACE(COMP_PS, "===========>%s()\n", __func__);
 	priv->bfirst_init = true;
 	init_status = priv->ops->initialize_adapter(dev);
-	if (init_status != true) {
+	if (!init_status) {
 		RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization is failed!\n",
 			 __func__);
 		priv->bdisable_nic = false;
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
index 1853665..2297fc2 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
@@ -535,7 +535,7 @@
 				}
 			}
 
-			if (viviflag == true) {
+			if (viviflag) {
 				write_nic_byte(dev, Pw_Track_Flag, 0);
 				viviflag = false;
 				RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n");
@@ -2265,7 +2265,7 @@
 		return;
 
 	if (priv->bfirst_after_down) {
-		priv->bfirst_after_down = 1;
+		priv->bfirst_after_down = true;
 		return;
 	}
 
@@ -2273,12 +2273,12 @@
 
 	eRfPowerStateToSet = (tmp1byte&BIT1) ?  eRfOn : eRfOff;
 
-	if ((priv->bHwRadioOff == true) && (eRfPowerStateToSet == eRfOn)) {
+	if (priv->bHwRadioOff && (eRfPowerStateToSet == eRfOn)) {
 		RT_TRACE(COMP_RF, "gpiochangeRF  - HW Radio ON\n");
 		printk(KERN_INFO "gpiochangeRF  - HW Radio ON\n");
 		priv->bHwRadioOff = false;
 		bActuallySet = true;
-	} else if ((priv->bHwRadioOff == false) && (eRfPowerStateToSet == eRfOff)) {
+	} else if (!priv->bHwRadioOff && (eRfPowerStateToSet == eRfOff)) {
 		RT_TRACE(COMP_RF, "gpiochangeRF  - HW Radio OFF\n");
 		printk(KERN_INFO "gpiochangeRF  - HW Radio OFF\n");
 		priv->bHwRadioOff = true;
@@ -2289,7 +2289,7 @@
 		mdelay(1000);
 		priv->bHwRfOffAction = 1;
 		MgntActSet_RF_State(dev, eRfPowerStateToSet, RF_CHANGE_BY_HW, true);
-		if (priv->bHwRadioOff == true)
+		if (priv->bHwRadioOff)
 			argv[1] = "RFOFF";
 		else
 			argv[1] = "RFON";
@@ -2312,9 +2312,9 @@
 
 	for (i = 0; i < RF90_PATH_MAX; i++) {
 		if (rfpath & (0x01<<i))
-			priv->brfpath_rxenable[i] = 1;
+			priv->brfpath_rxenable[i] = true;
 		else
-			priv->brfpath_rxenable[i] = 0;
+			priv->brfpath_rxenable[i] = false;
 	}
 	if (!DM_RxPathSelTable.Enable)
 		return;
@@ -2946,8 +2946,7 @@
 			priv->bDynamicTxLowPower = false;
 		} else {
 			if (priv->undecorated_smoothed_pwdb <
-			    txlowpower_threshold &&
-			    priv->bDynamicTxHighPower == true)
+			    txlowpower_threshold && priv->bDynamicTxHighPower)
 				priv->bDynamicTxHighPower = false;
 			if (priv->undecorated_smoothed_pwdb < 35)
 				priv->bDynamicTxLowPower = true;
diff --git a/drivers/staging/rtl8192e/rtl819x_TSProc.c b/drivers/staging/rtl8192e/rtl819x_TSProc.c
index 658e875..29608e5 100644
--- a/drivers/staging/rtl8192e/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192e/rtl819x_TSProc.c
@@ -264,7 +264,7 @@
 		psearch_list = &ieee->Rx_TS_Admit_List;
 
 	for (dir = 0; dir <= DIR_BI_DIR; dir++) {
-		if (search_dir[dir] == false)
+		if (!search_dir[dir])
 			continue;
 		list_for_each_entry(pRet, psearch_list, List) {
 			if (memcmp(pRet->Addr, Addr, 6) == 0)
@@ -348,7 +348,7 @@
 	if (*ppTS != NULL) {
 		return true;
 	} else {
-		if (bAddNewTs == false) {
+		if (!bAddNewTs) {
 			RTLLIB_DEBUG(RTLLIB_DL_TS, "add new TS failed"
 				     "(tid:%d)\n", UP);
 			return false;
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 8aeaed5..1a011b9 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -873,11 +873,11 @@
 		if (net_ratelimit())
 			printk(KERN_INFO "%s: find HTCControl!\n", __func__);
 		hdrlen += 4;
-		rx_stats->bContainHTC = 1;
+		rx_stats->bContainHTC = true;
 	}
 
 	 if (RTLLIB_QOS_HAS_SEQ(fc))
-		rx_stats->bIsQosData = 1;
+		rx_stats->bIsQosData = true;
 
 	return hdrlen;
 }
@@ -957,16 +957,15 @@
 static int rtllib_rx_data_filter(struct rtllib_device *ieee, u16 fc,
 				 u8 *dst, u8 *src, u8 *bssid, u8 *addr2)
 {
-	u8 zero_addr[ETH_ALEN] = {0};
 	u8 type, stype;
 
 	type = WLAN_FC_GET_TYPE(fc);
 	stype = WLAN_FC_GET_STYPE(fc);
 
 	/* Filter frames from different BSS */
-	if (((fc & RTLLIB_FCTL_DSTODS) != RTLLIB_FCTL_DSTODS)
-		&& (compare_ether_addr(ieee->current_network.bssid, bssid) != 0)
-		&& memcmp(ieee->current_network.bssid, zero_addr, ETH_ALEN)) {
+	if (((fc & RTLLIB_FCTL_DSTODS) != RTLLIB_FCTL_DSTODS) &&
+	    !ether_addr_equal(ieee->current_network.bssid, bssid) &&
+	    !is_zero_ether_addr(ieee->current_network.bssid)) {
 		return -1;
 	}
 
@@ -974,8 +973,8 @@
 	if (ieee->IntelPromiscuousModeInfo.bPromiscuousOn  &&
 		ieee->IntelPromiscuousModeInfo.bFilterSourceStationFrame) {
 		if ((fc & RTLLIB_FCTL_TODS) && !(fc & RTLLIB_FCTL_FROMDS) &&
-			(compare_ether_addr(dst, ieee->current_network.bssid) != 0) &&
-			(compare_ether_addr(bssid, ieee->current_network.bssid) == 0)) {
+		    !ether_addr_equal(dst, ieee->current_network.bssid) &&
+		    ether_addr_equal(bssid, ieee->current_network.bssid)) {
 			return -1;
 		}
 	}
@@ -1275,7 +1274,7 @@
 	/*Filter pkt not to me*/
 	multicast = is_multicast_ether_addr(hdr->addr1);
 	unicast = !multicast;
-	if (unicast && (compare_ether_addr(dev->dev_addr, hdr->addr1) != 0)) {
+	if (unicast && !ether_addr_equal(dev->dev_addr, hdr->addr1)) {
 		if (ieee->bNetPromiscuousMode)
 			bToOtherSTA = true;
 		else
@@ -1730,7 +1729,7 @@
 			network->CountryIeLen = info_element->len;
 
 			if (!IS_COUNTRY_IE_VALID(ieee)) {
-				if ((rtllib_act_scanning(ieee, false) == true) && (ieee->FirstIe_InScan == 1))
+				if (rtllib_act_scanning(ieee, false) && ieee->FirstIe_InScan)
 					printk(KERN_INFO "Received beacon ContryIE, SSID: <%s>\n", network->ssid);
 				Dot11d_UpdateCountryIe(ieee, addr2, info_element->len, info_element->data);
 			}
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index 0cbf6f5..933bd6d 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -604,7 +604,7 @@
 
 	if (!ieee->ieee_up)
 		return;
-	if (rtllib_act_scanning(ieee, true) == true)
+	if (rtllib_act_scanning(ieee, true))
 		return;
 
 	down(&ieee->scan_sem);
@@ -705,7 +705,7 @@
 	ieee->scan_watch_dog = 0;
 	if (ieee->scanning_continue == 1) {
 		ieee->scanning_continue = 0;
-		ieee->actscanning = 0;
+		ieee->actscanning = false;
 
 		cancel_delayed_work(&ieee->softmac_scan_wq);
 	}
@@ -1202,7 +1202,7 @@
 
 	if ((ieee->rtllib_ap_sec_type &&
 	    (ieee->rtllib_ap_sec_type(ieee) & SEC_ALG_TKIP)) ||
-	    (ieee->bForcedBgMode == true)) {
+	    ieee->bForcedBgMode) {
 		ieee->pHTInfo->bEnableHT = 0;
 		ieee->mode = WIRELESS_MODE_G;
 	}
@@ -1535,7 +1535,7 @@
 	struct rt_pwr_save_ctrl *pPSC = (struct rt_pwr_save_ctrl *)
 					(&(ieee->PowerSaveControl));
 	printk(KERN_INFO "Associated successfully\n");
-	if (ieee->is_silent_reset == 0) {
+	if (!ieee->is_silent_reset) {
 		printk(KERN_INFO "normal associate\n");
 		notify_wx_assoc_event(ieee);
 	}
@@ -1572,9 +1572,9 @@
 	pPSC->LpsIdleCount = 0;
 	ieee->link_change(ieee->dev);
 
-	if (ieee->is_silent_reset == 1) {
+	if (ieee->is_silent_reset) {
 		printk(KERN_INFO "silent reset associate\n");
-		ieee->is_silent_reset = 0;
+		ieee->is_silent_reset = false;
 	}
 
 	if (ieee->data_hard_resume)
@@ -2005,7 +2005,7 @@
 		return 0;
 
 	if (time) {
-		if (ieee->bAwakePktSent == true) {
+		if (ieee->bAwakePktSent) {
 			pPSC->LPSAwakeIntvl = 1;
 		} else {
 			u8		MaxPeriod = 1;
@@ -2338,8 +2338,7 @@
 					}
 
 					if (ieee->current_network.mode ==
-					    IEEE_N_24G &&
-					    bHalfSupportNmode == true) {
+					    IEEE_N_24G && bHalfSupportNmode) {
 						printk(KERN_INFO "======>enter "
 						       "half N mode\n");
 						ieee->bHalfWirelessN24GMode =
@@ -3098,7 +3097,7 @@
 	ieee->sta_edca_param[2] = 0x005E4342;
 	ieee->sta_edca_param[3] = 0x002F3262;
 	ieee->aggregation = true;
-	ieee->enable_rx_imm_BA = 1;
+	ieee->enable_rx_imm_BA = true;
 	ieee->tx_pending.txb = NULL;
 
 	_setup_timer(&ieee->associate_timer,
@@ -3591,14 +3590,9 @@
 		goto out;
 	}
 
-	param = kmalloc(p->length, GFP_KERNEL);
-	if (param == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(param, p->pointer, p->length)) {
-		kfree(param);
-		ret = -EFAULT;
+	param = memdup_user(p->pointer, p->length);
+	if (IS_ERR(param)) {
+		ret = PTR_ERR(param);
 		goto out;
 	}
 
diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c
index 1cc6a9d..3183627 100644
--- a/drivers/staging/rtl8192e/rtllib_tx.c
+++ b/drivers/staging/rtl8192e/rtllib_tx.c
@@ -908,7 +908,7 @@
 				tcb_desc->data_rate = CURRENT_RATE(ieee->mode,
 					ieee->rate, ieee->HTCurrentOperaRate);
 
-			if (bdhcp == true) {
+			if (bdhcp) {
 				if (ieee->pHTInfo->IOTAction &
 				    HT_IOT_ACT_WA_IOT_Broadcom) {
 					tcb_desc->data_rate =
diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
index c7e8d4d8..13af43b 100644
--- a/drivers/staging/rtl8192e/rtllib_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_wx.c
@@ -753,7 +753,7 @@
 		/* leave break out intentionly */
 
 	case IW_MLME_DISASSOC:
-		if (deauth == true)
+		if (deauth)
 			printk(KERN_INFO "disauth packet !\n");
 		else
 			printk(KERN_INFO "dis associate packet!\n");
diff --git a/drivers/staging/rtl8192u/dot11d.h b/drivers/staging/rtl8192u/dot11d.h
deleted file mode 100644
index 92e7a00..0000000
--- a/drivers/staging/rtl8192u/dot11d.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef __INC_DOT11D_H
-#define __INC_DOT11D_H
-
-#include "ieee80211/ieee80211.h"
-
-
-typedef struct _CHNL_TXPOWER_TRIPLE {
-	u8 FirstChnl;
-	u8  NumChnls;
-	u8  MaxTxPowerInDbm;
-} CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
-
-typedef enum _DOT11D_STATE {
-	DOT11D_STATE_NONE = 0,
-	DOT11D_STATE_LEARNED,
-	DOT11D_STATE_DONE,
-} DOT11D_STATE;
-
-typedef struct _RT_DOT11D_INFO {
-	/* DECLARE_RT_OBJECT(RT_DOT11D_INFO); */
-
-	bool bEnabled; /* dot11MultiDomainCapabilityEnabled */
-
-	u16 CountryIeLen; /* > 0 if CountryIeBuf[] contains valid country information element. */
-	u8  CountryIeBuf[MAX_IE_LEN];
-	u8  CountryIeSrcAddr[6]; /* Source AP of the country IE. */
-	u8  CountryIeWatchdog;
-
-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  /* !Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) */
-	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
-
-	DOT11D_STATE State;
-} RT_DOT11D_INFO, *PRT_DOT11D_INFO;
-#define eqMacAddr(a, b)		(((a)[0] == (b)[0] && \
-	(a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && \
-	(a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1 : 0)
-#define cpMacAddr(des, src)	      ((des)[0] = (src)[0], \
-	(des)[1] = (src)[1], (des)[2] = (src)[2], \
-	(des)[3] = (src)[3], (des)[4] = (src)[4], \
-	(des)[5] = (src)[5])
-#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
-
-#define IS_DOT11D_ENABLE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->bEnabled)
-#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
-
-#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-
-#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
-	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
-	FALSE : \
-	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
-
-#define CIE_WATCHDOG_TH 1
-#define GET_CIE_WATCHDOG(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog)
-#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) (++GET_CIE_WATCHDOG(__pIeeeDev))
-
-#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
-
-
-void
-Dot11d_Init(
-	struct ieee80211_device *dev
-	);
-
-void
-Dot11d_Reset(
-	struct ieee80211_device *dev
-	);
-
-void
-Dot11d_UpdateCountryIe(
-	struct ieee80211_device *dev,
-	u8 *pTaddr,
-	u16 CoutryIeLen,
-	u8 *pCoutryIe
-	);
-
-u8
-DOT11D_GetMaxTxPwrInDbm(
-	struct ieee80211_device *dev,
-	u8 Channel
-	);
-
-void
-DOT11D_ScanComplete(
-	struct ieee80211_device *dev
-	);
-
-int IsLegalChannel(
-	struct ieee80211_device *dev,
-	u8 channel
-);
-
-int ToLegalChannel(
-	struct ieee80211_device *dev,
-	u8 channel
-);
-#endif /* #ifndef __INC_DOT11D_H */
diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.h b/drivers/staging/rtl8192u/ieee80211/dot11d.h
index 6aa8c15..bd75e29 100644
--- a/drivers/staging/rtl8192u/ieee80211/dot11d.h
+++ b/drivers/staging/rtl8192u/ieee80211/dot11d.h
@@ -4,42 +4,43 @@
 #include "ieee80211.h"
 
 
-//#define DOT11D_MAX_CHNL_NUM 83
-
 typedef struct _CHNL_TXPOWER_TRIPLE {
 	u8 FirstChnl;
 	u8  NumChnls;
 	u8  MaxTxPowerInDbm;
-}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
+} CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
 
 typedef enum _DOT11D_STATE {
 	DOT11D_STATE_NONE = 0,
 	DOT11D_STATE_LEARNED,
 	DOT11D_STATE_DONE,
-}DOT11D_STATE;
+} DOT11D_STATE;
 
 typedef struct _RT_DOT11D_INFO {
-	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);
+	/* DECLARE_RT_OBJECT(RT_DOT11D_INFO); */
 
-	bool bEnabled; // dot11MultiDomainCapabilityEnabled
+	bool bEnabled; /* dot11MultiDomainCapabilityEnabled */
 
-	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.
+	u16 CountryIeLen; /* > 0 if CountryIeBuf[] contains valid country information element. */
 	u8  CountryIeBuf[MAX_IE_LEN];
-	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.
+	u8  CountryIeSrcAddr[6]; /* Source AP of the country IE. */
 	u8  CountryIeWatchdog;
 
-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)
-	//u8  ChnlListLen; // #Bytes valid in ChnlList[].
-	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];
+	u8  channel_map[MAX_CHANNEL_NUMBER+1];  /* !Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) */
 	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
 
 	DOT11D_STATE State;
-}RT_DOT11D_INFO, *PRT_DOT11D_INFO;
-#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
-#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
+} RT_DOT11D_INFO, *PRT_DOT11D_INFO;
+#define eqMacAddr(a, b)		(((a)[0] == (b)[0] && \
+	(a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && \
+	(a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1 : 0)
+#define cpMacAddr(des, src)	      ((des)[0] = (src)[0], \
+	(des)[1] = (src)[1], (des)[2] = (src)[2], \
+	(des)[3] = (src)[3], (des)[4] = (src)[4], \
+	(des)[5] = (src)[5])
 #define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
 
-#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
+#define IS_DOT11D_ENABLE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->bEnabled)
 #define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
 
 #define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
@@ -51,9 +52,9 @@
 	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
 
 #define CIE_WATCHDOG_TH 1
-#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
+#define GET_CIE_WATCHDOG(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog)
 #define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
+#define UPDATE_CIE_WATCHDOG(__pIeeeDev) (++GET_CIE_WATCHDOG(__pIeeeDev))
 
 #define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
 
@@ -72,7 +73,7 @@
 Dot11d_UpdateCountryIe(
 	struct ieee80211_device *dev,
 	u8 *pTaddr,
-	u16	CoutryIeLen,
+	u16 CoutryIeLen,
 	u8 *pCoutryIe
 	);
 
@@ -96,4 +97,4 @@
 	struct ieee80211_device *dev,
 	u8 channel
 );
-#endif // #ifndef __INC_DOT11D_H
+#endif /* #ifndef __INC_DOT11D_H */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
index 434c431..4b036a8 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
@@ -241,7 +241,7 @@
 			    //IEEE80211_DL_DATA	|
 			    IEEE80211_DL_ERR	  //awayls open this flags to show error out
 			    ;
-struct proc_dir_entry *ieee80211_proc;
+static struct proc_dir_entry *ieee80211_proc;
 
 static int show_debug_level(struct seq_file *m, void *v)
 {
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 59900bf..e730ed6 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -2166,7 +2166,8 @@
 	return RetSS;
 }
 
-long ieee80211_translate_todbm(u8 signal_strength_index	)// 0-100 index.
+/* 0-100 index */
+static long ieee80211_translate_todbm(u8 signal_strength_index)
 {
 	long	signal_power; // in dBm.
 
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 5fd6969..662c7e4 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -3150,14 +3150,9 @@
 		goto out;
 	}
 
-	param = kmalloc(p->length, GFP_KERNEL);
-	if (param == NULL){
-		ret = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(param, p->pointer, p->length)) {
-		kfree(param);
-		ret = -EFAULT;
+	param = memdup_user(p->pointer, p->length);
+	if (IS_ERR(param)) {
+		ret = PTR_ERR(param);
 		goto out;
 	}
 
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index a7bcc64f..157b2d7 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -237,8 +237,8 @@
 	kfree(txb);
 }
 
-struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
-					  int gfp_mask)
+static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
+						 gfp_t gfp_mask)
 {
 	struct ieee80211_txb *txb;
 	int i;
@@ -303,7 +303,8 @@
 }
 
 #define SN_LESS(a, b)		(((a-b)&0x800)!=0)
-void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee, struct sk_buff *skb, cb_desc *tcb_desc)
+static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
+				       struct sk_buff *skb, cb_desc *tcb_desc)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 	PTX_TS_RECORD			pTxTs = NULL;
@@ -412,7 +413,8 @@
 		tcb_desc->bUseShortGI = true;
 }
 
-void ieee80211_query_BandwidthMode(struct ieee80211_device *ieee, cb_desc *tcb_desc)
+static void ieee80211_query_BandwidthMode(struct ieee80211_device *ieee,
+					  cb_desc *tcb_desc)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 
@@ -432,7 +434,9 @@
 	return;
 }
 
-void ieee80211_query_protectionmode(struct ieee80211_device *ieee, cb_desc *tcb_desc, struct sk_buff *skb)
+static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
+					   cb_desc *tcb_desc,
+					   struct sk_buff *skb)
 {
 	// Common Settings
 	tcb_desc->bRTSSTBC			= false;
@@ -543,7 +547,8 @@
 }
 
 
-void ieee80211_txrate_selectmode(struct ieee80211_device *ieee, cb_desc *tcb_desc)
+static void ieee80211_txrate_selectmode(struct ieee80211_device *ieee,
+					cb_desc *tcb_desc)
 {
 #ifdef TO_DO_LIST
 	if(!IsDataFrame(pFrame))
@@ -573,7 +578,8 @@
 	}
 }
 
-void ieee80211_query_seqnum(struct ieee80211_device *ieee, struct sk_buff *skb, u8 *dst)
+static void ieee80211_query_seqnum(struct ieee80211_device *ieee,
+				   struct sk_buff *skb, u8 *dst)
 {
 	if (is_multicast_ether_addr(dst))
 		return;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
index db0db93..3684da3 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
@@ -251,7 +251,8 @@
  *  output:  none
  *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
 ********************************************************************************************************************/
-void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee, u8 *dst, PBA_RECORD	pBA)
+static void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee,
+				    u8 *dst, PBA_RECORD pBA)
 {
 	struct sk_buff *skb = NULL;
 	skb = ieee80211_ADDBA(ieee, dst, pBA, 0, ACT_ADDBAREQ); //construct ACT_ADDBAREQ frames so set statuscode zero.
@@ -278,7 +279,8 @@
  *  output:  none
  *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
 ********************************************************************************************************************/
-void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst, PBA_RECORD pBA, u16 StatusCode)
+static void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst,
+				    PBA_RECORD pBA, u16 StatusCode)
 {
 	struct sk_buff *skb = NULL;
 	skb = ieee80211_ADDBA(ieee, dst, pBA, StatusCode, ACT_ADDBARSP); //construct ACT_ADDBARSP frames
diff --git a/drivers/staging/rtl8192u/ieee80211_crypt.h b/drivers/staging/rtl8192u/ieee80211_crypt.h
deleted file mode 100644
index 0b4ea43..0000000
--- a/drivers/staging/rtl8192u/ieee80211_crypt.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Original code based on Host AP (software wireless LAN access point) driver
- * for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- *
- * Copyright (c) 2004, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-/*
- * This file defines the interface to the ieee80211 crypto module.
- */
-#ifndef IEEE80211_CRYPT_H
-#define IEEE80211_CRYPT_H
-
-#include <linux/skbuff.h>
-
-struct ieee80211_crypto_ops {
-	const char *name;
-
-	/* init new crypto context (e.g., allocate private data space,
-	 * select IV, etc.); returns NULL on failure or pointer to allocated
-	 * private data on success */
-	void * (*init)(int keyidx);
-
-	/* deinitialize crypto context and free allocated private data */
-	void (*deinit)(void *priv);
-
-	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
-	 * value from decrypt_mpdu is passed as the keyidx value for
-	 * decrypt_msdu. skb must have enough head and tail room for the
-	 * encryption; if not, error will be returned; these functions are
-	 * called for all MPDUs (i.e., fragments).
-	 */
-	int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
-	int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
-
-	/* These functions are called for full MSDUs, i.e. full frames.
-	 * These can be NULL if full MSDU operations are not needed. */
-	int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
-	int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
-			    void *priv);
-
-	int (*set_key)(void *key, int len, u8 *seq, void *priv);
-	int (*get_key)(void *key, int len, u8 *seq, void *priv);
-
-	/* procfs handler for printing out key information and possible
-	 * statistics */
-	char * (*print_stats)(char *p, void *priv);
-
-	/* maximum number of bytes added by encryption; encrypt buf is
-	 * allocated with extra_prefix_len bytes, copy of in_buf, and
-	 * extra_postfix_len; encrypt need not use all this space, but
-	 * the result must start at the beginning of the buffer and correct
-	 * length must be returned */
-	int extra_prefix_len, extra_postfix_len;
-
-	struct module *owner;
-};
-
-struct ieee80211_crypt_data {
-	struct list_head list; /* delayed deletion list */
-	struct ieee80211_crypto_ops *ops;
-	void *priv;
-	atomic_t refcnt;
-};
-
-int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
-int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
-struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name);
-void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
-void ieee80211_crypt_deinit_handler(unsigned long);
-void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
-				    struct ieee80211_crypt_data **crypt);
-
-#endif
diff --git a/drivers/staging/rtl8192u/r8180_pm.c b/drivers/staging/rtl8192u/r8180_pm.c
deleted file mode 100644
index 999968d..0000000
--- a/drivers/staging/rtl8192u/r8180_pm.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-   Power management interface routines.
-   Written by Mariusz Matuszek.
-   This code is currently just a placeholder for later work and
-   does not do anything useful.
-
-   This is part of rtl8180 OpenSource driver.
-   Copyright (C) Andrea Merello 2004  <andrea.merello@gmail.com>
-   Released under the terms of GPL (General Public Licence)
-*/
-
-#ifdef CONFIG_RTL8180_PM
-
-
-#include "r8180_hw.h"
-#include "r8180_pm.h"
-
-int rtl8180_save_state (struct pci_dev *dev, u32 state)
-{
-	printk(KERN_NOTICE "r8180 save state call (state %u).\n", state);
-	return(-EAGAIN);
-}
-
-
-int rtl8180_suspend (struct pci_dev *dev, u32 state)
-{
-	printk(KERN_NOTICE "r8180 suspend call (state %u).\n", state);
-	return(-EAGAIN);
-}
-
-
-int rtl8180_resume (struct pci_dev *dev)
-{
-	printk(KERN_NOTICE "r8180 resume call.\n");
-	return(-EAGAIN);
-}
-
-
-int rtl8180_enable_wake (struct pci_dev *dev, u32 state, int enable)
-{
-	printk(KERN_NOTICE "r8180 enable wake call (state %u, enable %d).\n",
-	       state, enable);
-	return(-EAGAIN);
-}
-
-
-
-#endif //CONFIG_RTL8180_PM
diff --git a/drivers/staging/rtl8192u/r8180_pm.h b/drivers/staging/rtl8192u/r8180_pm.h
deleted file mode 100644
index 4be63da..0000000
--- a/drivers/staging/rtl8192u/r8180_pm.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
-	Power management interface routines.
-	Written by Mariusz Matuszek.
-	This code is currently just a placeholder for later work and
-	does not do anything useful.
-
-	This is part of rtl8180 OpenSource driver.
-	Copyright (C) Andrea Merello 2004  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-*/
-
-#ifdef CONFIG_RTL8180_PM
-
-#ifndef R8180_PM_H
-#define R8180_PM_H
-
-#include <linux/types.h>
-#include <linux/pci.h>
-
-int rtl8180_save_state (struct pci_dev *dev, u32 state);
-int rtl8180_suspend (struct pci_dev *dev, u32 state);
-int rtl8180_resume (struct pci_dev *dev);
-int rtl8180_enable_wake (struct pci_dev *dev, u32 state, int enable);
-
-#endif //R8180_PM_H
-
-#endif // CONFIG_RTL8180_PM
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.h b/drivers/staging/rtl8192u/r8190_rtl8256.h
index 592e780..fa6dd37 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.h
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.h
@@ -13,11 +13,7 @@
 #ifndef RTL8225H
 #define RTL8225H
 
-#ifdef RTL8190P
-#define RTL819X_TOTAL_RF_PATH 4 //for 90P
-#else
 #define RTL819X_TOTAL_RF_PATH 2 //for 8192U
-#endif
 extern void PHY_SetRF8256Bandwidth(struct net_device *dev , HT_CHANNEL_WIDTH Bandwidth);
 extern void PHY_RF8256_Config(struct net_device *dev);
 extern void phy_RF8256_Config_ParaFile(struct net_device *dev);
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index b484ee1..ad3bc56 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -409,15 +409,11 @@
 #define	USB_HWDESC_HEADER_LEN		sizeof(tx_desc_819x_usb)
 #define TX_PACKET_SHIFT_BYTES		(USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
 #define MAX_FRAGMENT_COUNT		8
-#ifdef RTL8192U
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
 #define MAX_TRANSMIT_BUFFER_SIZE			32000
 #else
 #define MAX_TRANSMIT_BUFFER_SIZE			8000
 #endif
-#else
-#define MAX_TRANSMIT_BUFFER_SIZE	(1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
-#endif
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
 #define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
 #endif
@@ -1158,14 +1154,6 @@
 	NIC_8192E = 3,
 } nic_t;
 
-
-#ifdef JOHN_HWSEC
-struct ssid_thread {
-	struct net_device *dev;
-	u8 name[IW_ESSID_MAX_SIZE + 1];
-};
-#endif
-
 bool init_firmware(struct net_device *dev);
 short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
 short rtl8192_tx(struct net_device *dev, struct sk_buff *skb);
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index cd0946d..c2bcbe2 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -392,7 +392,7 @@
 	return 0;
 }
 
-int read_nic_word_E(struct net_device *dev, int indx, u16 *data)
+static int read_nic_word_E(struct net_device *dev, int indx, u16 *data)
 {
 	int status;
 	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
@@ -585,7 +585,7 @@
 	return 0;
 }
 
-void rtl8192_proc_module_init(void)
+static void rtl8192_proc_module_init(void)
 {
 	RT_TRACE(COMP_INIT, "Initializing proc filesystem");
 	rtl8192_proc = proc_mkdir(RTL819xU_MODULE_NAME, init_net.proc_net);
@@ -631,7 +631,7 @@
 	{ "" }
 };
 
-void rtl8192_proc_init_one(struct net_device *dev)
+static void rtl8192_proc_init_one(struct net_device *dev)
 {
 	const struct rtl8192_proc_file *f;
 	struct proc_dir_entry *dir;
@@ -656,7 +656,7 @@
 	}
 }
 
-void rtl8192_proc_remove_one(struct net_device *dev)
+static void rtl8192_proc_remove_one(struct net_device *dev)
 {
 	remove_proc_subtree(dev->name, rtl8192_proc);
 }
@@ -755,7 +755,7 @@
 
 static void rtl8192_rx_isr(struct urb *urb);
 
-u32 get_rxpacket_shiftbytes_819xusb(struct ieee80211_rx_stats *pstats)
+static u32 get_rxpacket_shiftbytes_819xusb(struct ieee80211_rx_stats *pstats)
 {
 
 #ifdef USB_RX_AGGREGATION_SUPPORT
@@ -998,8 +998,8 @@
 		netdev_err(dev, "can not submit rxurb, err is %x, URB status is %x\n", err, urb->status);
 }
 
-u32 rtl819xusb_rx_command_packet(struct net_device *dev,
-				 struct ieee80211_rx_stats *pstats)
+static u32 rtl819xusb_rx_command_packet(struct net_device *dev,
+					struct ieee80211_rx_stats *pstats)
 {
 	u32	status;
 
@@ -1609,13 +1609,6 @@
 #else
 	idx_pipe = 0x04;
 #endif
-#ifdef JOHN_DUMP_TXDESC
-	int i;
-	printk("<Tx descriptor>--rate %x---", rate);
-	for (i = 0; i < 8; i++)
-		printk("%8x ", tx[i]);
-	printk("\n");
-#endif
 	usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe),
 			  skb->data, skb->len, rtl8192_tx_isr, skb);
 
@@ -1636,7 +1629,7 @@
  *
  * \param QUEUEID       Software Queue
 */
-u8 MapHwQueueToFirmwareQueue(u8 QueueID)
+static u8 MapHwQueueToFirmwareQueue(u8 QueueID)
 {
 	u8 QueueSelect = 0x0;       //defualt set to
 
@@ -1723,7 +1716,7 @@
 }
 
 
-u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc)
+static u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc)
 {
 	u8   tmp_Short;
 
@@ -1934,7 +1927,7 @@
 	}
 }
 
-short rtl8192_usb_initendpoints(struct net_device *dev)
+static short rtl8192_usb_initendpoints(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 
@@ -1992,7 +1985,7 @@
 
 }
 #ifdef THOMAS_BEACON
-void rtl8192_usb_deleteendpoints(struct net_device *dev)
+static void rtl8192_usb_deleteendpoints(struct net_device *dev)
 {
 	int i;
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -2009,7 +2002,7 @@
 	priv->oldaddr = NULL;
 	if (priv->pp_rxskb) {
 		kfree(priv->pp_rxskb);
-		priv->pp_rxskb = 0;
+		priv->pp_rxskb = NULL;
 	}
 }
 #else
@@ -2292,7 +2285,7 @@
 
 static u8 ccmp_ie[4] = {0x00, 0x50, 0xf2, 0x04};
 static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
-bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
+static bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	struct ieee80211_device *ieee = priv->ieee80211;
@@ -3167,7 +3160,7 @@
 	return &priv->ieee80211->stats;
 }
 
-bool HalTxCheckStuck819xUsb(struct net_device *dev)
+static bool HalTxCheckStuck819xUsb(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u16		RegTxCounter;
@@ -3217,7 +3210,7 @@
 	return RESET_TYPE_NORESET;
 }
 
-bool HalRxCheckStuck819xUsb(struct net_device *dev)
+static bool HalRxCheckStuck819xUsb(struct net_device *dev)
 {
 	u16	RegRxCounter;
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -3259,7 +3252,7 @@
 	return bStuck;
 }
 
-RESET_TYPE RxCheckStuck(struct net_device *dev)
+static RESET_TYPE RxCheckStuck(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	bool        bRxCheck = FALSE;
@@ -3796,14 +3789,9 @@
 		goto out;
 	}
 
-	ipw = kmalloc(p->length, GFP_KERNEL);
-	if (ipw == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(ipw, p->pointer, p->length)) {
-		kfree(ipw);
-		ret = -EFAULT;
+	ipw = memdup_user(p->pointer, p->length);
+	if (IS_ERR(ipw)) {
+		ret = PTR_ERR(ipw);
 		goto out;
 	}
 
@@ -3859,15 +3847,6 @@
 				}
 			}
 		}
-#ifdef JOHN_HWSEC_DEBUG
-		//john's test 0711
-		printk("@@ wrq->u pointer = ");
-		for (i = 0; i < wrq->u.data.length; i++) {
-			if (i%10 == 0) printk("\n");
-			printk("%8x|", ((u32 *)wrq->u.data.pointer)[i]);
-		}
-		printk("\n");
-#endif /*JOHN_HWSEC_DEBUG*/
 		ret = ieee80211_wpa_supplicant_ioctl(priv->ieee80211, &wrq->u.data);
 		break;
 
@@ -3952,7 +3931,8 @@
  * Return:
  *               None
  */
-void UpdateRxPktTimeStamp8190(struct net_device *dev, struct ieee80211_rx_stats *stats)
+static void UpdateRxPktTimeStamp8190(struct net_device *dev,
+				     struct ieee80211_rx_stats *stats)
 {
 	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 
@@ -4209,7 +4189,7 @@
 //	We want good-looking for signal strength/quality
 //	2007/7/19 01:09, by cosa.
 //
-long rtl819x_signal_scale_mapping(long currsig)
+static long rtl819x_signal_scale_mapping(long currsig)
 {
 	long retsig;
 
@@ -4478,9 +4458,9 @@
 }
 
 
-void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
-				   struct ieee80211_rx_stats *pstats,
-				   rx_drvinfo_819x_usb  *pdrvinfo)
+static void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
+					  struct ieee80211_rx_stats *pstats,
+					  rx_drvinfo_819x_usb  *pdrvinfo)
 {
 	// TODO: We must only check packet for current MAC address. Not finish
 	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
@@ -4549,8 +4529,9 @@
 * Return:
 *		None
 */
-void UpdateReceivedRateHistogramStatistics8190(struct net_device *dev,
-					       struct ieee80211_rx_stats *stats)
+static void
+UpdateReceivedRateHistogramStatistics8190(struct net_device *dev,
+					  struct ieee80211_rx_stats *stats)
 {
 	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 	u32 rcvType = 1;   //0: Total, 1:OK, 2:CRC, 3:ICV
@@ -4614,7 +4595,9 @@
 }
 
 
-void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe)
+static void query_rxdesc_status(struct sk_buff *skb,
+				struct ieee80211_rx_stats *stats,
+				bool bIsRxAggrSubframe)
 {
 	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
 	struct net_device *dev = info->dev;
@@ -4930,7 +4913,8 @@
 
 }
 
-void query_rx_cmdpkt_desc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats)
+static void query_rx_cmdpkt_desc_status(struct sk_buff *skb,
+					struct ieee80211_rx_stats *stats)
 {
 	rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
 
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index a6e4c37..41fb67b 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -100,14 +100,6 @@
 //static	void	dm_txpower_reset_recovery(struct net_device *dev);
 
 
-// DM --> BB init gain restore
-#ifndef RTL8192U
-static	void	dm_bb_initialgain_restore(struct net_device *dev);
-
-
-// DM --> BB init gain backup
-static	void	dm_bb_initialgain_backup(struct net_device *dev);
-#endif
 // DM --> Dynamic Init Gain by RSSI
 static	void	dm_dig_init(struct net_device *dev);
 static	void	dm_ctrl_initgain_byrssi(struct net_device *dev);
@@ -122,12 +114,7 @@
 // DM --> EDCA turbo mode control
 static	void	dm_check_edca_turbo(struct net_device *dev);
 
-// DM --> HW RF control
-static	void	dm_check_rfctrl_gpio(struct net_device *dev);
-
-#ifndef RTL8190P
 //static	void	dm_gpio_change_rf(struct net_device *dev);
-#endif
 // DM --> Check PBC
 static	void dm_check_pbc_gpio(struct net_device *dev);
 
@@ -269,7 +256,6 @@
 	dm_ctrl_initgain_byrssi(dev);
 	dm_check_edca_turbo(dev);
 	dm_bandwidth_autoswitch(dev);
-	dm_check_rfctrl_gpio(dev);
 	dm_check_rx_path_selection(dev);
 	dm_check_fsync(dev);
 
@@ -620,16 +606,11 @@
 	tx_cmd.Op		= TXCMD_SET_TX_PWR_TRACKING;
 	tx_cmd.Length	= 4;
 	tx_cmd.Value		= Value;
-#ifdef RTL8192U
 	rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12);
 	if (rtStatus == RT_STATUS_FAILURE)
 	{
 		RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
 	}
-#else
-	cmpk_message_handle_tx(dev, (u8 *)&tx_cmd,
-								DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
-#endif
 	mdelay(1);
 	//DbgPrint("hi, vivi, strange\n");
 	for(i = 0;i <= 30; i++)
@@ -641,11 +622,7 @@
 			mdelay(1);
 			continue;
 		}
-#ifdef RTL8190P
-		read_nic_word(dev, 0x1bc, &Avg_TSSI_Meas);
-#else
 		read_nic_word(dev, 0x13c, &Avg_TSSI_Meas);
-#endif
 		if(Avg_TSSI_Meas == 0)
 		{
 			write_nic_byte(dev, 0x1ba, 0);
@@ -654,14 +631,10 @@
 
 		for(k = 0;k < 5; k++)
 		{
-#ifdef RTL8190P
-			read_nic_byte(dev, 0x1d8+k, &tmp_report[k]);
-#else
 			if(k !=4)
 				read_nic_byte(dev, 0x134+k, &tmp_report[k]);
 			else
 				read_nic_byte(dev, 0x13e, &tmp_report[k]);
-#endif
 			RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value = %d\n", tmp_report[k]);
 		}
 
@@ -708,10 +681,6 @@
 			RT_TRACE(COMP_POWER_TRACKING, "tx power track is done\n");
 			RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
 			RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
-#ifdef RTL8190P
-			RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex);
-			RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real);
-#endif
 			RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
 			RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
 			return;
@@ -720,11 +689,7 @@
 		{
 			if(Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK)
 			{
-				if((priv->rfa_txpowertrackingindex > 0)
-#ifdef RTL8190P
-					&&(priv->rfc_txpowertrackingindex > 0)
-#endif
-				)
+				if (priv->rfa_txpowertrackingindex > 0)
 				{
 					priv->rfa_txpowertrackingindex--;
 					if(priv->rfa_txpowertrackingindex_real > 4)
@@ -732,33 +697,16 @@
 						priv->rfa_txpowertrackingindex_real--;
 						rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
 					}
-#ifdef RTL8190P
-					priv->rfc_txpowertrackingindex--;
-					if(priv->rfc_txpowertrackingindex_real > 4)
-					{
-						priv->rfc_txpowertrackingindex_real--;
-						rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
-					}
-#endif
 				}
 			}
 			else
 			{
-				if((priv->rfa_txpowertrackingindex < 36)
-#ifdef RTL8190P
-					&&(priv->rfc_txpowertrackingindex < 36)
-#endif
-					)
+				if (priv->rfa_txpowertrackingindex < 36)
 				{
 					priv->rfa_txpowertrackingindex++;
 					priv->rfa_txpowertrackingindex_real++;
 					rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
 
-#ifdef RTL8190P
-					priv->rfc_txpowertrackingindex++;
-					priv->rfc_txpowertrackingindex_real++;
-					rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
-#endif
 				}
 			}
 			priv->cck_present_attentuation_difference
@@ -788,10 +736,6 @@
 			}
 		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
 		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
-#ifdef RTL8190P
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex);
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real);
-#endif
 		RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
 		RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
 
@@ -937,14 +881,10 @@
        struct r8192_priv *priv = container_of(dwork,struct r8192_priv,txpower_tracking_wq);
        struct net_device *dev = priv->ieee80211->dev;
 
-#ifdef RTL8190P
-	dm_TXPowerTrackingCallback_TSSI(dev);
-#else
 	if(priv->bDcut == TRUE)
 		dm_TXPowerTrackingCallback_TSSI(dev);
 	else
 		dm_TXPowerTrackingCallback_ThermalMeter(dev);
-#endif
 }
 
 
@@ -1472,14 +1412,10 @@
 void dm_initialize_txpower_tracking(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-#ifdef RTL8190P
-	dm_InitializeTXPowerTracking_TSSI(dev);
-#else
 	if(priv->bDcut == TRUE)
 		dm_InitializeTXPowerTracking_TSSI(dev);
 	else
 		dm_InitializeTXPowerTracking_ThermalMeter(dev);
-#endif
 }// dm_InitializeTXPowerTracking
 
 
@@ -1677,14 +1613,10 @@
 {	// dm_CCKTxPowerAdjust
 
 	struct r8192_priv *priv = ieee80211_priv(dev);
-#ifdef RTL8190P
-	dm_CCKTxPowerAdjust_TSSI(dev, binch14);
-#else
 	if(priv->bDcut == TRUE)
 		dm_CCKTxPowerAdjust_TSSI(dev, binch14);
 	else
 		dm_CCKTxPowerAdjust_ThermalMeter(dev, binch14);
-#endif
 }
 
 
@@ -2194,11 +2126,7 @@
 		{
 			/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 			// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-			#ifdef RTL8190P
-				write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
-			#else
-				write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
-			#endif
+			write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
 			/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
 				write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
 			*/
@@ -2265,11 +2193,7 @@
 		{
 			/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 			// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-			#ifdef RTL8190P
-				write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
-			#else
-				write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
-			#endif
+			write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
 			/*
 			else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
 				write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
@@ -2342,11 +2266,7 @@
 		// 3.1 Higher PD_TH for OFDM for high power state.
 		if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
 		{
-			#ifdef RTL8190P
-				write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
-			#else
-				write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
-			#endif
+			write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
 
 			/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
 				write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
@@ -2370,11 +2290,7 @@
 			// 3.2 Recover PD_TH for OFDM for normal power region.
 			if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
 			{
-				#ifdef RTL8190P
-					write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
-				#else
-					write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
-				#endif
+				write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
 				/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
 					write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
 				*/
@@ -2516,11 +2432,7 @@
 				{
 					/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 					// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-					#ifdef RTL8190P
-						write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
-					#else
-						write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
-					#endif
+					write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
 					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
 						write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
 					*/
@@ -2535,11 +2447,7 @@
 				{
 					/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 					// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-					#ifdef RTL8190P
-						write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
-					#else
-						write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
-					#endif
+					write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
 					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
 						write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
 					*/
@@ -2552,11 +2460,7 @@
 				// Higher PD_TH for OFDM for high power state.
 				if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
 				{
-					#ifdef RTL8190P
-						write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
-					#else
-						write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
-					#endif
+					write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
 					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
 						write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
 					*/
@@ -2823,44 +2727,6 @@
 	}
 }
 
-
-/*-----------------------------------------------------------------------------
- * Function:	dm_check_rfctrl_gpio()
- *
- * Overview:	Copy 8187B template for 9xseries.
- *
- * Input:		NONE
- *
- * Output:		NONE
- *
- * Return:		NONE
- *
- * Revised History:
- *	When		Who		Remark
- *	05/28/2008	amy		Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-static void dm_check_rfctrl_gpio(struct net_device *dev)
-{
-	//struct r8192_priv *priv = ieee80211_priv(dev);
-
-	// Work around for DTM test, we will not enable HW - radio on/off because r/w
-	// page 1 register before extra bus is enabled causing system failures when resuming
-	// from S4. 20080218, Emily
-
-	// Stop to execute workitem to prevent S3/S4 bug.
-#ifdef RTL8190P
-	return;
-#endif
-#ifdef RTL8192U
-	return;
-#endif
-#ifdef RTL8192E
-		queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0);
-#endif
-
-}	/* dm_CheckRfCtrlGPIO */
-
 /*-----------------------------------------------------------------------------
  * Function:	dm_check_pbc_gpio()
  *
@@ -2879,7 +2745,6 @@
  *---------------------------------------------------------------------------*/
 static	void	dm_check_pbc_gpio(struct net_device *dev)
 {
-#ifdef RTL8192U
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8 tmp1byte;
 
@@ -2895,83 +2760,9 @@
 		RT_TRACE(COMP_IO, "CheckPbcGPIO - PBC is pressed\n");
 		priv->bpbc_pressed = true;
 	}
-#endif
 
 }
 
-#ifdef RTL8192E
-
-/*-----------------------------------------------------------------------------
- * Function:	dm_GPIOChangeRF
- * Overview:	PCI will not support workitem call back HW radio on-off control.
- *
- * Input:		NONE
- *
- * Output:		NONE
- *
- * Return:		NONE
- *
- * Revised History:
- *	When		Who		Remark
- *	02/21/2008	MHC		Create Version 0.
- *
- *---------------------------------------------------------------------------*/
-extern	void	dm_gpio_change_rf_callback(struct work_struct *work)
-{
-	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
-       struct r8192_priv *priv = container_of(dwork,struct r8192_priv,gpio_change_rf_wq);
-       struct net_device *dev = priv->ieee80211->dev;
-	u8 tmp1byte;
-	RT_RF_POWER_STATE	eRfPowerStateToSet;
-	bool bActuallySet = false;
-
-	do{
-		bActuallySet=false;
-
-		if(!priv->up)
-		{
-			RT_TRACE((COMP_INIT | COMP_POWER | COMP_RF),"dm_gpio_change_rf_callback(): Callback function breaks out!!\n");
-		}
-		else
-		{
-			// 0x108 GPIO input register is read only
-			//set 0x108 B1= 1: RF-ON; 0: RF-OFF.
-			read_nic_byte(dev, GPI, &tmp1byte);
-
-			eRfPowerStateToSet = (tmp1byte&BIT1) ?  eRfOn : eRfOff;
-
-			if((priv->bHwRadioOff == true) && (eRfPowerStateToSet == eRfOn))
-			{
-				RT_TRACE(COMP_RF, "gpiochangeRF  - HW Radio ON\n");
-
-				priv->bHwRadioOff = false;
-				bActuallySet = true;
-			}
-			else if ((priv->bHwRadioOff == false) && (eRfPowerStateToSet == eRfOff))
-			{
-				RT_TRACE(COMP_RF, "gpiochangeRF  - HW Radio OFF\n");
-				priv->bHwRadioOff = true;
-				bActuallySet = true;
-			}
-
-			if(bActuallySet)
-			{
-				#ifdef TO_DO
-				MgntActSet_RF_State(dev, eRfPowerStateToSet, RF_CHANGE_BY_HW);
-				//DrvIFIndicateCurrentPhyStatus(pAdapter);
-				#endif
-			}
-			else
-			{
-				msleep(2000);
-			}
-
-		}
-	}while(TRUE)
-
-}	/* dm_GPIOChangeRF */
-
-#endif
 /*-----------------------------------------------------------------------------
  * Function:	DM_RFPathCheckWorkItemCallBack()
  *
@@ -3329,11 +3120,7 @@
 	priv->ieee80211->fsync_time_interval = 500;
 	priv->ieee80211->fsync_rate_bitmap = 0x0f000800;
 	priv->ieee80211->fsync_rssi_threshold = 30;
-#ifdef RTL8190P
-	priv->ieee80211->bfsync_enable = true;
-#else
 	priv->ieee80211->bfsync_enable = false;
-#endif
 	priv->ieee80211->fsync_multiple_timeinterval = 3;
 	priv->ieee80211->fsync_firstdiff_ratethreshold= 100;
 	priv->ieee80211->fsync_seconddiff_ratethreshold= 200;
@@ -3416,20 +3203,12 @@
 			priv->bswitch_fsync = !priv->bswitch_fsync;
 			if(priv->bswitch_fsync)
 			{
-			#ifdef RTL8190P
-				write_nic_byte(dev, 0xC36, 0x00);
-			#else
 				write_nic_byte(dev,0xC36, 0x1c);
-			#endif
 				write_nic_byte(dev, 0xC3e, 0x90);
 			}
 			else
 			{
-			#ifdef RTL8190P
-				write_nic_byte(dev, 0xC36, 0x40);
-			#else
 				write_nic_byte(dev, 0xC36, 0x5c);
-			#endif
 				write_nic_byte(dev, 0xC3e, 0x96);
 			}
 		}
@@ -3438,11 +3217,7 @@
 			if(priv->bswitch_fsync)
 			{
 				priv->bswitch_fsync  = false;
-			#ifdef RTL8190P
-				write_nic_byte(dev, 0xC36, 0x40);
-			#else
 				write_nic_byte(dev, 0xC36, 0x5c);
-			#endif
 				write_nic_byte(dev, 0xC3e, 0x96);
 			}
 		}
@@ -3465,19 +3240,11 @@
 		if(priv->bswitch_fsync)
 		{
 			priv->bswitch_fsync  = false;
-		#ifdef RTL8190P
-			write_nic_byte(dev, 0xC36, 0x40);
-		#else
 			write_nic_byte(dev, 0xC36, 0x5c);
-		#endif
 			write_nic_byte(dev, 0xC3e, 0x96);
 		}
 		priv->ContinueDiffCount = 0;
-	#ifdef RTL8190P
-		write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd);
-	#else
 		write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
-	#endif
 	}
 	RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount);
 	RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
@@ -3502,19 +3269,13 @@
 	{
 		priv->bswitch_fsync  = false;
 
-		#ifdef RTL8190P
-			write_nic_byte(dev, 0xC36, 0x40);
-		#else
-			write_nic_byte(dev, 0xC36, 0x5c);
-		#endif
+		write_nic_byte(dev, 0xC36, 0x5c);
 
 		write_nic_byte(dev, 0xC3e, 0x96);
 	}
 
 	priv->ContinueDiffCount = 0;
-#ifndef RTL8190P
 	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
-#endif
 
 }
 
@@ -3553,9 +3314,7 @@
 	priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval);
 	add_timer(&priv->fsync_timer);
 
-#ifndef RTL8190P
 	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c12cd);
-#endif
 
 }
 
@@ -3624,11 +3383,7 @@
 		{
 			if(reg_c38_State != RegC38_Fsync_AP_BCM)
 			{	//For broadcom AP we write different default value
-				#ifdef RTL8190P
-					write_nic_byte(dev, rOFDM0_RxDetector3, 0x15);
-				#else
-					write_nic_byte(dev, rOFDM0_RxDetector3, 0x95);
-				#endif
+				write_nic_byte(dev, rOFDM0_RxDetector3, 0x95);
 
 				reg_c38_State = RegC38_Fsync_AP_BCM;
 			}
@@ -3659,11 +3414,7 @@
 				{
 					if(reg_c38_State != RegC38_NonFsync_Other_AP)
 					{
-						#ifdef RTL8190P
-							write_nic_byte(dev, rOFDM0_RxDetector3, 0x10);
-						#else
-							write_nic_byte(dev, rOFDM0_RxDetector3, 0x90);
-						#endif
+						write_nic_byte(dev, rOFDM0_RxDetector3, 0x90);
 
 						reg_c38_State = RegC38_NonFsync_Other_AP;
 					}
@@ -3845,10 +3596,8 @@
 		SetTxPowerLevel8190(Adapter,pHalData->CurrentChannel);
 #endif
 
-#ifdef RTL8192U
 		rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
 		//pHalData->bStartTxCtrlByTPCNFR = FALSE;    //Clear th flag of Set TX Power from Sitesurvey
-#endif
 	}
 	priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
 	priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower;
@@ -3885,9 +3634,6 @@
 	tx_cmd.Op		= TXCMD_SET_RX_RSSI;
 	tx_cmd.Length	= 4;
 	tx_cmd.Value		= priv->undecorated_smoothed_pwdb;
-
-	cmpk_message_handle_tx(dev, (u8 *)&tx_cmd,
-								DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
 }
 
 /*---------------------------Define function prototype------------------------*/
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index 61f6620..c70af01 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -127,156 +127,6 @@
 	return ieee80211_wx_get_power(priv->ieee80211,info,wrqu,extra);
 }
 
-#ifdef JOHN_IOCTL
-u16 read_rtl8225(struct net_device *dev, u8 addr);
-void write_rtl8225(struct net_device *dev, u8 adr, u16 data);
-u32 john_read_rtl8225(struct net_device *dev, u8 adr);
-void _write_rtl8225(struct net_device *dev, u8 adr, u16 data);
-
-static int r8192_wx_read_regs(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8 addr;
-	u16 data1;
-
-	down(&priv->wx_sem);
-
-
-	get_user(addr,(u8 *)wrqu->data.pointer);
-	data1 = read_rtl8225(dev, addr);
-	wrqu->data.length = data1;
-
-	up(&priv->wx_sem);
-	return 0;
-
-}
-
-static int r8192_wx_write_regs(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8 addr;
-
-	down(&priv->wx_sem);
-
-	get_user(addr, (u8 *)wrqu->data.pointer);
-	write_rtl8225(dev, addr, wrqu->data.length);
-
-	up(&priv->wx_sem);
-	return 0;
-
-}
-
-void rtl8187_write_phy(struct net_device *dev, u8 adr, u32 data);
-u8 rtl8187_read_phy(struct net_device *dev,u8 adr, u32 data);
-
-static int r8192_wx_read_bb(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8 databb;
-
-	down(&priv->wx_sem);
-
-	databb = rtl8187_read_phy(dev, (u8)wrqu->data.length, 0x00000000);
-	wrqu->data.length = databb;
-
-	up(&priv->wx_sem);
-	return 0;
-}
-
-void rtl8187_write_phy(struct net_device *dev, u8 adr, u32 data);
-static int r8192_wx_write_bb(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8 databb;
-
-	down(&priv->wx_sem);
-
-	get_user(databb, (u8 *)wrqu->data.pointer);
-	rtl8187_write_phy(dev, wrqu->data.length, databb);
-
-	up(&priv->wx_sem);
-	return 0;
-
-}
-
-
-static int r8192_wx_write_nicb(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32 addr;
-
-	down(&priv->wx_sem);
-
-	get_user(addr, (u32 *)wrqu->data.pointer);
-	write_nic_byte(dev, addr, wrqu->data.length);
-
-	up(&priv->wx_sem);
-	return 0;
-
-}
-static int r8192_wx_read_nicb(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32 addr;
-	u16 data1;
-
-	down(&priv->wx_sem);
-
-	get_user(addr,(u32 *)wrqu->data.pointer);
-	read_nic_byte(dev, addr, &data1);
-	wrqu->data.length = data1;
-
-	up(&priv->wx_sem);
-	return 0;
-}
-
-static int r8192_wx_get_ap_status(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-	struct ieee80211_network *target;
-	int name_len;
-
-	down(&priv->wx_sem);
-
-	//count the length of input ssid
-	for(name_len=0 ; ((char *)wrqu->data.pointer)[name_len]!='\0' ; name_len++);
-
-	//search for the corresponding info which is received
-	list_for_each_entry(target, &ieee->network_list, list) {
-		if ( (target->ssid_len == name_len) &&
-		     (strncmp(target->ssid, (char *)wrqu->data.pointer, name_len)==0)){
-			if(target->wpa_ie_len>0 || target->rsn_ie_len>0 )
-				//set flags=1 to indicate this ap is WPA
-				wrqu->data.flags = 1;
-			else wrqu->data.flags = 0;
-
-
-		break;
-		}
-	}
-
-	up(&priv->wx_sem);
-	return 0;
-}
-
-
-
-#endif
 static int r8192_wx_force_reset(struct net_device *dev,
 		struct iw_request_info *info,
 		union iwreq_data *wrqu, char *extra)
@@ -1106,46 +956,7 @@
 	{
 		SIOCIWFIRSTPRIV + 0x2,
 		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "rawtx"
-	}
-#ifdef JOHN_IOCTL
-	,
-	{
-		SIOCIWFIRSTPRIV + 0x3,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "readRF"
-	}
-	,
-	{
-		SIOCIWFIRSTPRIV + 0x4,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "writeRF"
-	}
-	,
-	{
-		SIOCIWFIRSTPRIV + 0x5,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "readBB"
-	}
-	,
-	{
-		SIOCIWFIRSTPRIV + 0x6,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "writeBB"
-	}
-	,
-	{
-		SIOCIWFIRSTPRIV + 0x7,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "readnicb"
-	}
-	,
-	{
-		SIOCIWFIRSTPRIV + 0x8,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "writenicb"
-	}
-	,
-	{
-		SIOCIWFIRSTPRIV + 0x9,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "apinfo"
-	}
-
-#endif
-	,
+	},
 	{
 		SIOCIWFIRSTPRIV + 0x3,
 		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "forcereset"
@@ -1163,15 +974,6 @@
 //	r8192_wx_set_monitor_type,
 	r8192_wx_set_scan_type,
 	r8192_wx_set_rawtx,
-#ifdef JOHN_IOCTL
-	r8192_wx_read_regs,
-	r8192_wx_write_regs,
-	r8192_wx_read_bb,
-	r8192_wx_write_bb,
-	r8192_wx_read_nicb,
-	r8192_wx_write_nicb,
-	r8192_wx_get_ap_status,
-#endif
 	//r8192_wx_null,
 	r8192_wx_force_reset,
 };
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
index 19a7bdd..2cbb8e6 100644
--- a/drivers/staging/rtl8192u/r819xU_HTType.h
+++ b/drivers/staging/rtl8192u/r819xU_HTType.h
@@ -2,41 +2,36 @@
 #define _R819XU_HTTYPE_H_
 
 
-//------------------------------------------------------------
-// The HT Capability element is present in beacons, association request,
-//	reassociation request and probe response frames
-//------------------------------------------------------------
+/*----------------------------------------------------------------------
+ * The HT Capability element is present in beacons, association request,
+ * reassociation request and probe response frames
+ *----------------------------------------------------------------------*/
 
-//
-// Operation mode value
-//
+/* Operation mode value */
 #define HT_OPMODE_NO_PROTECT		0
 #define HT_OPMODE_OPTIONAL		1
-#define HT_OPMODE_40MHZ_PROTECT	2
+#define HT_OPMODE_40MHZ_PROTECT		2
 #define HT_OPMODE_MIXED			3
 
-//
-// MIMO Power Save Settings
-//
-#define MIMO_PS_STATIC				0
+/* MIMO Power Save Settings */
+#define MIMO_PS_STATIC			0
 #define MIMO_PS_DYNAMIC			1
 #define MIMO_PS_NOLIMIT			3
 
 
-//
-//	There should be 128 bits to cover all of the MCS rates. However, since
-//	8190 does not support too much rates, one integer is quite enough.
-//
+/* There should be 128 bits to cover all of the MCS rates. However, since
+ * 8190 does not support too much rates, one integer is quite enough. */
 
-#define sHTCLng	4
+#define sHTCLng				4
 
 
-#define HT_SUPPORTED_MCS_1SS_BITMAP					0x000000ff
-#define HT_SUPPORTED_MCS_2SS_BITMAP					0x0000ff00
-#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP			HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
+#define HT_SUPPORTED_MCS_1SS_BITMAP	0x000000ff
+#define HT_SUPPORTED_MCS_2SS_BITMAP	0x0000ff00
+#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP	\
+		(HT_MCS_1SS_BITMAP | HT_MCS_1SS_2SS_BITMAP)
 
 
-typedef enum _HT_MCS_RATE{
+typedef enum _HT_MCS_RATE {
 	HT_MCS0   = 0x00000001,
 	HT_MCS1   = 0x00000002,
 	HT_MCS2   = 0x00000004,
@@ -47,71 +42,67 @@
 	HT_MCS7   = 0x00000080,
 	HT_MCS8   = 0x00000100,
 	HT_MCS9   = 0x00000200,
-	HT_MCS10 = 0x00000400,
-	HT_MCS11 = 0x00000800,
-	HT_MCS12 = 0x00001000,
-	HT_MCS13 = 0x00002000,
-	HT_MCS14 = 0x00004000,
-	HT_MCS15 = 0x00008000,
-	// Do not define MCS32 here although 8190 support MCS32
-}HT_MCS_RATE,*PHT_MCS_RATE;
+	HT_MCS10  = 0x00000400,
+	HT_MCS11  = 0x00000800,
+	HT_MCS12  = 0x00001000,
+	HT_MCS13  = 0x00002000,
+	HT_MCS14  = 0x00004000,
+	HT_MCS15  = 0x00008000,
+	/* Do not define MCS32 here although 8190 support MCS32 */
+} HT_MCS_RATE, *PHT_MCS_RATE;
 
-//
-// Represent Channel Width in HT Capabilities
-//
-typedef enum _HT_CHANNEL_WIDTH{
-	HT_CHANNEL_WIDTH_20 = 0,
+/* Represent Channel Width in HT Capabilities */
+typedef enum _HT_CHANNEL_WIDTH {
+	HT_CHANNEL_WIDTH_20    = 0,
 	HT_CHANNEL_WIDTH_20_40 = 1,
-}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
+} HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
 
-//
-// Represent Extension Channel Offset in HT Capabilities
-// This is available only in 40Mhz mode.
-//
-typedef enum _HT_EXTCHNL_OFFSET{
+/* Represent Extension Channel Offset in HT Capabilities
+ * This is available only in 40Mhz mode. */
+typedef enum _HT_EXTCHNL_OFFSET {
 	HT_EXTCHNL_OFFSET_NO_EXT = 0,
-	HT_EXTCHNL_OFFSET_UPPER = 1,
+	HT_EXTCHNL_OFFSET_UPPER  = 1,
 	HT_EXTCHNL_OFFSET_NO_DEF = 2,
-	HT_EXTCHNL_OFFSET_LOWER = 3,
-}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
+	HT_EXTCHNL_OFFSET_LOWER  = 3,
+} HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
 
-typedef enum _CHNLOP{
-	CHNLOP_NONE = 0, // No Action now
-	CHNLOP_SCAN = 1, // Scan in progress
-	CHNLOP_SWBW = 2, // Bandwidth switching in progress
-	CHNLOP_SWCHNL = 3, // Software Channel switching in progress
+typedef enum _CHNLOP {
+	CHNLOP_NONE   = 0,	/* No Action now */
+	CHNLOP_SCAN   = 1,	/* Scan in progress */
+	CHNLOP_SWBW   = 2,	/* Bandwidth switching in progress */
+	CHNLOP_SWCHNL = 3,	/* Software Channel switching in progress */
 } CHNLOP, *PCHNLOP;
 
-// Determine if the Channel Operation is in progress
+/* Determine if the Channel Operation is in progress */
 #define CHHLOP_IN_PROGRESS(_pHTInfo)	\
-		((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE
+		(((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE)
 
 
-typedef enum _HT_ACTION{
+typedef enum _HT_ACTION {
 	ACT_RECOMMAND_WIDTH		= 0,
 	ACT_MIMO_PWR_SAVE		= 1,
-	ACT_PSMP					= 2,
+	ACT_PSMP			= 2,
 	ACT_SET_PCO_PHASE		= 3,
-	ACT_MIMO_CHL_MEASURE	= 4,
-	ACT_RECIPROCITY_CORRECT	= 5,
+	ACT_MIMO_CHL_MEASURE		= 4,
+	ACT_RECIPROCITY_CORRECT		= 5,
 	ACT_MIMO_CSI_MATRICS		= 6,
-	ACT_MIMO_NOCOMPR_STEER	= 7,
+	ACT_MIMO_NOCOMPR_STEER		= 7,
 	ACT_MIMO_COMPR_STEER		= 8,
 	ACT_ANTENNA_SELECT		= 9,
 } HT_ACTION, *PHT_ACTION;
 
 
-/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
-typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{
+/* Define sub-carrier mode for 40MHZ. */
+typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier {
 	SC_MODE_DUPLICATE = 0,
-	SC_MODE_LOWER = 1,
-	SC_MODE_UPPER = 2,
+	SC_MODE_LOWER     = 1,
+	SC_MODE_UPPER     = 2,
 	SC_MODE_FULL40MHZ = 3,
-}HT_BW40_SC_E;
+} HT_BW40_SC_E;
 
-typedef	struct _HT_CAPABILITY_ELE{
+typedef	struct _HT_CAPABILITY_ELE {
 
-	//HT capability info
+	/* HT capability info */
 	u8	AdvCoding:1;
 	u8	ChlWidth:1;
 	u8	MimoPwrSave:2;
@@ -127,32 +118,32 @@
 	u8	Rsvd1:1;
 	u8	LSigTxopProtect:1;
 
-	//MAC HT parameters info
+	/* MAC HT parameters info */
 	u8	MaxRxAMPDUFactor:2;
 	u8	MPDUDensity:3;
 	u8	Rsvd2:3;
 
-	//Supported MCS set
+	/* Supported MCS set */
 	u8	MCS[16];
 
 
-	//Extended HT Capability Info
+	/* Extended HT Capability Info */
 	u16	ExtHTCapInfo;
 
-	//TXBF Capabilities
+	/* TXBF Capabilities */
 	u8	TxBFCap[4];
 
-	//Antenna Selection Capabilities
+	/* Antenna Selection Capabilities */
 	u8	ASCap;
 
-}__attribute__((packed)) HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE;
+} __packed HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE;
 
-//------------------------------------------------------------
-// The HT Information element is present in beacons
-// Only AP is required to include this element
-//------------------------------------------------------------
+/*------------------------------------------------------------
+ * The HT Information element is present in beacons
+ * Only AP is required to include this element
+ *------------------------------------------------------------*/
 
-typedef struct _HT_INFORMATION_ELE{
+typedef struct _HT_INFORMATION_ELE {
 	u8	ControlChl;
 
 	u8	ExtChlOffset:2;
@@ -177,146 +168,146 @@
 	u8	Rsvd4:4;
 
 	u8	BasicMSC[16];
-}__attribute__((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE;
+} __packed HT_INFORMATION_ELE, *PHT_INFORMATION_ELE;
 
-//
-// MIMO Power Save control field.
-// This is appear in MIMO Power Save Action Frame
-//
-typedef struct _MIMOPS_CTRL{
+/* MIMO Power Save control field.
+ * This is appear in MIMO Power Save Action Frame */
+typedef struct _MIMOPS_CTRL {
 	u8	MimoPsEnable:1;
 	u8	MimoPsMode:1;
 	u8	Reserved:6;
 } MIMOPS_CTRL, *PMIMOPS_CTRL;
 
-typedef enum _HT_SPEC_VER{
+typedef enum _HT_SPEC_VER {
 	HT_SPEC_VER_IEEE = 0,
 	HT_SPEC_VER_EWC = 1,
-}HT_SPEC_VER, *PHT_SPEC_VER;
+} HT_SPEC_VER, *PHT_SPEC_VER;
 
-typedef enum _HT_AGGRE_MODE_E{
+typedef enum _HT_AGGRE_MODE_E {
 	HT_AGG_AUTO = 0,
 	HT_AGG_FORCE_ENABLE = 1,
 	HT_AGG_FORCE_DISABLE = 2,
-}HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E;
+} HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E;
 
-//------------------------------------------------------------
-//  The Data structure is used to keep HT related variables when card is
-//  configured as non-AP STA mode.  **Note**  Current_xxx should be set
-//	to default value in HTInitializeHTInfo()
-//------------------------------------------------------------
+/*----------------------------------------------------------------------------
+ *  The Data structure is used to keep HT related variables when card is
+ *  configured as non-AP STA mode.
+ *  **Note** Current_xxx should be set to default value in HTInitializeHTInfo()
+ *----------------------------------------------------------------------------*/
 
-typedef struct _RT_HIGH_THROUGHPUT{
-//	DECLARE_RT_OBJECT(_RT_HIGH_THROUGHPUT);
-	u8				bEnableHT;
-	u8				bCurrentHTSupport;
+typedef struct _RT_HIGH_THROUGHPUT {
+	u8			bEnableHT;
+	u8			bCurrentHTSupport;
+	/* Tx 40MHz channel capability */
+	u8			bRegBW40MHz;
+	u8			bCurBW40MHz;
+	/* Tx Short GI for 40Mhz */
+	u8			bRegShortGI40MHz;
+	u8			bCurShortGI40MHz;
+	/* Tx Short GI for 20MHz */
+	u8			bRegShortGI20MHz;
+	u8			bCurShortGI20MHz;
+	/* Tx CCK rate capability */
+	u8			bRegSuppCCK;
+	u8			bCurSuppCCK;
 
-	u8				bRegBW40MHz;				// Tx 40MHz channel capability
-	u8				bCurBW40MHz;				// Tx 40MHz channel capability
-
-	u8				bRegShortGI40MHz;			// Tx Short GI for 40Mhz
-	u8				bCurShortGI40MHz;			// Tx Short GI for 40MHz
-
-	u8				bRegShortGI20MHz;			// Tx Short GI for 20MHz
-	u8				bCurShortGI20MHz;			// Tx Short GI for 20MHz
-
-	u8				bRegSuppCCK;				// Tx CCK rate capability
-	u8				bCurSuppCCK;				// Tx CCK rate capability
-
-	// 802.11n spec version for "peer"
-	HT_SPEC_VER			ePeerHTSpecVer;
+	/* 802.11n spec version for "peer" */
+	HT_SPEC_VER		ePeerHTSpecVer;
 
 
-	// HT related information for "Self"
-	HT_CAPABILITY_ELE	SelfHTCap;					// This is HT cap element sent to peer STA, which also indicate HT Rx capabilities.
-	HT_INFORMATION_ELE	SelfHTInfo;					// This is HT info element sent to peer STA, which also indicate HT Rx capabilities.
+	/* HT related information for "Self" */
+	/* This is HT cap element sent to peer STA, which also indicate
+	 * HT Rx capabilities. */
+	HT_CAPABILITY_ELE	SelfHTCap;
+	HT_INFORMATION_ELE	SelfHTInfo;
 
-	// HT related information for "Peer"
-	u8				PeerHTCapBuf[32];
-	u8				PeerHTInfoBuf[32];
+	/* HT related information for "Peer" */
+	u8			PeerHTCapBuf[32];
+	u8			PeerHTInfoBuf[32];
 
 
-	// A-MSDU related
-	u8				bAMSDU_Support;			// This indicates Tx A-MSDU capability
-	u16				nAMSDU_MaxSize;			// This indicates Tx A-MSDU capability
-	u8				bCurrent_AMSDU_Support;	// This indicates Tx A-MSDU capability
-	u16				nCurrent_AMSDU_MaxSize;	// This indicates Tx A-MSDU capability
+	/* A-MSDU related */
+	/* This indicates Tx A-MSDU capability */
+	u8			bAMSDU_Support;
+	u16			nAMSDU_MaxSize;
+	u8			bCurrent_AMSDU_Support;
+	u16			nCurrent_AMSDU_MaxSize;
 
 
-	// AMPDU  related <2006.08.10 Emily>
-	u8				bAMPDUEnable;				// This indicate Tx A-MPDU capability
-	u8				bCurrentAMPDUEnable;		// This indicate Tx A-MPDU capability
-	u8				AMPDU_Factor;				// This indicate Tx A-MPDU capability
-	u8				CurrentAMPDUFactor;		// This indicate Tx A-MPDU capability
-	u8				MPDU_Density;				// This indicate Tx A-MPDU capability
-	u8				CurrentMPDUDensity;			// This indicate Tx A-MPDU capability
+	/* A-MPDU related */
+	/* This indicate Tx A-MPDU capability */
+	u8			bAMPDUEnable;
+	u8			bCurrentAMPDUEnable;
+	u8			AMPDU_Factor;
+	u8			CurrentAMPDUFactor;
+	u8			MPDU_Density;
+	u8			CurrentMPDUDensity;
 
-	// Forced A-MPDU enable
-	HT_AGGRE_MODE_E	ForcedAMPDUMode;
-	u8				ForcedAMPDUFactor;
-	u8				ForcedMPDUDensity;
+	/* Forced A-MPDU enable */
+	HT_AGGRE_MODE_E		ForcedAMPDUMode;
+	u8			ForcedAMPDUFactor;
+	u8			ForcedMPDUDensity;
 
-	// Forced A-MSDU enable
-	HT_AGGRE_MODE_E	ForcedAMSDUMode;
-	u16				ForcedAMSDUMaxSize;
+	/* Forced A-MSDU enable */
+	HT_AGGRE_MODE_E		ForcedAMSDUMode;
+	u16			ForcedAMSDUMaxSize;
 
-	u8				bForcedShortGI;
+	u8			bForcedShortGI;
 
-	u8				CurrentOpMode;
+	u8			CurrentOpMode;
 
-	// MIMO PS related
-	u8				SelfMimoPs;
-	u8				PeerMimoPs;
+	/* MIMO PS related */
+	u8			SelfMimoPs;
+	u8			PeerMimoPs;
 
-	// 40MHz Channel Offset settings.
+	/* 40MHz Channel Offset settings. */
 	HT_EXTCHNL_OFFSET	CurSTAExtChnlOffset;
-	u8				bCurTxBW40MHz;	// If we use 40 MHz to Tx
-	u8				PeerBandwidth;
+	u8			bCurTxBW40MHz;	/* If we use 40 MHz to Tx */
+	u8			PeerBandwidth;
 
-	// For Bandwidth Switching
-	u8				bSwBwInProgress;
-	CHNLOP				ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15.
-	u8				SwBwStep;
-	//RT_TIMER			SwBwTimer;
-	struct timer_list		SwBwTimer;
+	/* For Bandwidth Switching */
+	u8			bSwBwInProgress;
+	CHNLOP			ChnlOp; /* sw switching channel in progress. */
+	u8			SwBwStep;
+	struct timer_list	SwBwTimer;
 
-	// For Realtek proprietary A-MPDU factor for aggregation
-	u8				bRegRT2RTAggregation;
-	u8				bCurrentRT2RTAggregation;
-	u8				bCurrentRT2RTLongSlotTime;
-	u8				szRT2RTAggBuffer[10];
+	/* For Realtek proprietary A-MPDU factor for aggregation */
+	u8			bRegRT2RTAggregation;
+	u8			bCurrentRT2RTAggregation;
+	u8			bCurrentRT2RTLongSlotTime;
+	u8			szRT2RTAggBuffer[10];
 
-	// Rx Reorder control
-	u8				bRegRxReorderEnable;
-	u8				bCurRxReorderEnable;
-	u8				RxReorderWinSize;
-	u8				RxReorderPendingTime;
-	u16				RxReorderDropCounter;
+	/* Rx Reorder control */
+	u8			bRegRxReorderEnable;
+	u8			bCurRxReorderEnable;
+	u8			RxReorderWinSize;
+	u8			RxReorderPendingTime;
+	u16			RxReorderDropCounter;
 
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-	u8				UsbTxAggrNum;
+	u8			UsbTxAggrNum;
 #endif
 #ifdef USB_RX_AGGREGATION_SUPPORT
-	u8				UsbRxFwAggrEn;
-	u8				UsbRxFwAggrPageNum;
-	u8				UsbRxFwAggrPacketNum;
-	u8				UsbRxFwAggrTimeout;
+	u8			UsbRxFwAggrEn;
+	u8			UsbRxFwAggrPageNum;
+	u8			UsbRxFwAggrPacketNum;
+	u8			UsbRxFwAggrTimeout;
 #endif
 
-	// Add for Broadcom(Linksys) IOT. Joseph
-	u8				bIsPeerBcm;
+	/* Add for Broadcom(Linksys) IOT. */
+	u8			bIsPeerBcm;
 
-	// For IOT issue.
-	u32					IOTAction;
-}RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
+	/* For IOT issue. */
+	u32			IOTAction;
+} RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
 
 
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variable for "each Sta"
-// when card is configured as "AP mode"
-//------------------------------------------------------------
+/*----------------------------------------------------------------------
+ * The Data structure is used to keep HT related variable for "each Sta"
+ * when card is configured as "AP mode"
+ *----------------------------------------------------------------------*/
 
-typedef struct _RT_HTINFO_STA_ENTRY{
+typedef struct _RT_HTINFO_STA_ENTRY {
 	u8			bEnableHT;
 
 	u8			bSupportCck;
@@ -335,56 +326,54 @@
 	u8			McsRateSet[16];
 
 
-}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
+} RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
 
 
 
 
 
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variable for "each AP"
-// when card is configured as "STA mode"
-//------------------------------------------------------------
+/*---------------------------------------------------------------------
+ * The Data structure is used to keep HT related variable for "each AP"
+ * when card is configured as "STA mode"
+ *---------------------------------------------------------------------*/
 
-typedef struct _BSS_HT{
+typedef struct _BSS_HT {
 
 	u8				bdSupportHT;
 
-	// HT related elements
-	u8					bdHTCapBuf[32];
-	u16					bdHTCapLen;
-	u8					bdHTInfoBuf[32];
-	u16					bdHTInfoLen;
+	/* HT related elements */
+	u8				bdHTCapBuf[32];
+	u16				bdHTCapLen;
+	u8				bdHTInfoBuf[32];
+	u16				bdHTInfoLen;
 
-	HT_SPEC_VER				bdHTSpecVer;
-	//HT_CAPABILITY_ELE			bdHTCapEle;
-	//HT_INFORMATION_ELE		bdHTInfoEle;
+	HT_SPEC_VER			bdHTSpecVer;
 
-	u8					bdRT2RTAggregation;
-	u8					bdRT2RTLongSlotTime;
-}BSS_HT, *PBSS_HT;
+	u8				bdRT2RTAggregation;
+	u8				bdRT2RTLongSlotTime;
+} BSS_HT, *PBSS_HT;
 
-typedef struct _MIMO_RSSI{
+typedef struct _MIMO_RSSI {
 	u32	EnableAntenna;
 	u32	AntennaA;
 	u32	AntennaB;
 	u32	AntennaC;
 	u32	AntennaD;
 	u32	Average;
-}MIMO_RSSI, *PMIMO_RSSI;
+} MIMO_RSSI, *PMIMO_RSSI;
 
-typedef struct _MIMO_EVM{
+typedef struct _MIMO_EVM {
 	u32	EVM1;
-	u32    EVM2;
-}MIMO_EVM, *PMIMO_EVM;
+	u32	EVM2;
+} MIMO_EVM, *PMIMO_EVM;
 
-typedef struct _FALSE_ALARM_STATISTICS{
+typedef struct _FALSE_ALARM_STATISTICS {
 	u32	Cnt_Parity_Fail;
-	u32    Cnt_Rate_Illegal;
+	u32	Cnt_Rate_Illegal;
 	u32	Cnt_Crc8_fail;
 	u32	Cnt_all;
-}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
+} FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
 
 
 
-#endif //__INC_HTTYPE_H
+#endif
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index 5614401..7bdcbd3 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -62,105 +62,6 @@
 }
 
 /*-----------------------------------------------------------------------------
- * Function:	cmpk_message_handle_tx()
- *
- * Overview:	Driver internal module can call the API to send message to
- *		firmware side. For example, you can send a debug command packet.
- *		Or you can send a request for FW to modify RLX4181 LBUS HW bank.
- *		Otherwise, you can change MAC/PHT/RF register by firmware at
- *		run time. We do not support message more than one segment now.
- *
- * Input:	NONE
- *
- * Output:	NONE
- *
- * Return:	NONE
- *
- * Revised History:
- *	When		Who		Remark
- *	05/06/2008	amy		porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-extern rt_status cmpk_message_handle_tx(struct net_device *dev,
-					u8 *codevirtualaddress,
-					u32 packettype, u32 buffer_len)
-{
-
-	bool	    rt_status = true;
-#ifdef RTL8192U
-	return rt_status;
-#else
-	struct r8192_priv   *priv = ieee80211_priv(dev);
-	u16		    frag_threshold;
-	u16		    frag_length, frag_offset = 0;
-
-	rt_firmware	    *pfirmware = priv->pFirmware;
-	struct sk_buff	    *skb;
-	unsigned char	    *seg_ptr;
-	cb_desc		    *tcb_desc;
-	u8                  bLastIniPkt;
-
-	firmware_init_param(dev);
-	/* Fragmentation might be required */
-	frag_threshold = pfirmware->cmdpacket_frag_thresold;
-	do {
-		if ((buffer_len - frag_offset) > frag_threshold) {
-			frag_length = frag_threshold;
-			bLastIniPkt = 0;
-
-		} else {
-			frag_length = buffer_len - frag_offset;
-			bLastIniPkt = 1;
-
-		}
-
-		/* Allocate skb buffer to contain firmware info and tx
-		   descriptor info add 4 to avoid packet appending overflow. */
-#ifdef RTL8192U
-		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
-#else
-		skb  = dev_alloc_skb(frag_length + 4);
-#endif
-		memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
-		tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
-		tcb_desc->queue_index = TXCMD_QUEUE;
-		tcb_desc->bCmdOrInit = packettype;
-		tcb_desc->bLastIniPkt = bLastIniPkt;
-
-#ifdef RTL8192U
-		skb_reserve(skb, USB_HWDESC_HEADER_LEN);
-#endif
-
-		seg_ptr = skb_put(skb, buffer_len);
-		/*
-		 * Transform from little endian to big endian
-		 * and pending zero
-		 */
-		memcpy(seg_ptr, codevirtualaddress, buffer_len);
-		tcb_desc->txbuf_size = (u16)buffer_len;
-
-
-		if (!priv->ieee80211->check_nic_enough_desc(dev, tcb_desc->queue_index) ||
-		    (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index])) ||
-		    (priv->ieee80211->queue_stop)) {
-			RT_TRACE(COMP_FIRMWARE, "======> tx full!\n");
-			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
-		} else {
-			priv->ieee80211->softmac_hard_start_xmit(skb, dev);
-		}
-
-		codevirtualaddress += frag_length;
-		frag_offset += frag_length;
-
-	} while (frag_offset < buffer_len);
-
-	return rt_status;
-
-
-#endif
-}
-
-/*-----------------------------------------------------------------------------
  * Function:    cmpk_counttxstatistic()
  *
  * Overview:
@@ -593,8 +494,8 @@
  *  05/06/2008		amy	Create Version 0 porting from windows code.
  *
  *---------------------------------------------------------------------------*/
-extern u32 cmpk_message_handle_rx(struct net_device *dev,
-				  struct ieee80211_rx_stats *pstats)
+u32 cmpk_message_handle_rx(struct net_device *dev,
+			   struct ieee80211_rx_stats *pstats)
 {
 	int			total_length;
 	u8			cmd_length, exe_cnt = 0;
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.h b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
index ebe4032..52cd437 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.h
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
@@ -1,17 +1,17 @@
 #ifndef R819XUSB_CMDPKT_H
 #define R819XUSB_CMDPKT_H
 /* Different command packet have dedicated message length and definition. */
-#define		CMPK_RX_TX_FB_SIZE					sizeof(cmpk_txfb_t)		//20
-#define		CMPK_TX_SET_CONFIG_SIZE				sizeof(cmpk_set_cfg_t)	//16
-#define		CMPK_BOTH_QUERY_CONFIG_SIZE			sizeof(cmpk_set_cfg_t)	//16
-#define		CMPK_RX_TX_STS_SIZE					sizeof(cmpk_tx_status_t)//
-#define		CMPK_RX_DBG_MSG_SIZE			sizeof(cmpk_rx_dbginfo_t)//
-#define		CMPK_TX_RAHIS_SIZE			sizeof(cmpk_tx_rahis_t)
+#define		CMPK_RX_TX_FB_SIZE		sizeof(cmpk_txfb_t)	/* 20 */
+#define		CMPK_TX_SET_CONFIG_SIZE		sizeof(cmpk_set_cfg_t)	/* 16 */
+#define		CMPK_BOTH_QUERY_CONFIG_SIZE	sizeof(cmpk_set_cfg_t)	/* 16 */
+#define		CMPK_RX_TX_STS_SIZE		sizeof(cmpk_tx_status_t)
+#define		CMPK_RX_DBG_MSG_SIZE		sizeof(cmpk_rx_dbginfo_t)
+#define		CMPK_TX_RAHIS_SIZE		sizeof(cmpk_tx_rahis_t)
 
 /* 2008/05/08 amy For USB constant. */
-#define ISR_TxBcnOk					BIT27			// Transmit Beacon OK
-#define ISR_TxBcnErr				BIT26			// Transmit Beacon Error
-#define ISR_BcnTimerIntr			BIT13			// Beacon Timer Interrupt
+#define ISR_TxBcnOk		BIT27		/* Transmit Beacon OK */
+#define ISR_TxBcnErr		BIT26		/* Transmit Beacon Error */
+#define ISR_BcnTimerIntr	BIT13		/* Beacon Timer Interrupt */
 
 
 /* Define element ID of command packet. */
@@ -20,182 +20,172 @@
 /* Define different command packet structure. */
 /* 1. RX side: TX feedback packet. */
 typedef struct tag_cmd_pkt_tx_feedback {
-	// DWORD 0
+	/* DWORD 0 */
 	u8	element_id;			/* Command packet type. */
 	u8	length;				/* Command packet length. */
-	/* 2007/07/05 MH Change tx feedback info field. */
+	/* Change tx feedback info field. */
 	/*------TX Feedback Info Field */
-	u8	TID:4;				/* */
-	u8	fail_reason:3;		/* */
+	u8	TID:4;
+	u8	fail_reason:3;
 	u8	tok:1;				/* Transmit ok. */
-	u8	reserve1:4;			/* */
-	u8	pkt_type:2;		/* */
-	u8	bandwidth:1;		/* */
-	u8	qos_pkt:1;			/* */
+	u8	reserve1:4;
+	u8	pkt_type:2;
+	u8	bandwidth:1;
+	u8	qos_pkt:1;
 
-	// DWORD 1
-	u8	reserve2;			/* */
+	/* DWORD 1 */
+	u8	reserve2;
 	/*------TX Feedback Info Field */
-	u8	retry_cnt;			/* */
-	u16	pkt_id;				/* */
+	u8	retry_cnt;
+	u16	pkt_id;
 
-	// DWORD 3
-	u16	seq_num;			/* */
+	/* DWORD 3 */
+	u16	seq_num;
 	u8	s_rate;				/* Start rate. */
 	u8	f_rate;				/* Final rate. */
 
-	// DWORD 4
-	u8	s_rts_rate;			/* */
-	u8	f_rts_rate;			/* */
-	u16	pkt_length;			/* */
+	/* DWORD 4 */
+	u8	s_rts_rate;
+	u8	f_rts_rate;
+	u16	pkt_length;
 
-	// DWORD 5
-	u16	reserve3;			/* */
-	u16	duration;			/* */
-}cmpk_txfb_t;
+	/* DWORD 5 */
+	u16	reserve3;
+	u16	duration;
+} cmpk_txfb_t;
 
 /* 2. RX side: Interrupt status packet. It includes Beacon State,
-	  Beacon Timer Interrupt and other useful informations in MAC ISR Reg. */
+ * Beacon Timer Interrupt and other useful informations in MAC ISR Reg. */
 typedef struct tag_cmd_pkt_interrupt_status {
 	u8	element_id;			/* Command packet type. */
 	u8	length;				/* Command packet length. */
 	u16	reserve;
-	u32	interrupt_status;				/* Interrupt Status. */
-}cmpk_intr_sta_t;
+	u32	interrupt_status;		/* Interrupt Status. */
+} cmpk_intr_sta_t;
 
 
 /* 3. TX side: Set configuration packet. */
 typedef struct tag_cmd_pkt_set_configuration {
 	u8	element_id;			/* Command packet type. */
 	u8	length;				/* Command packet length. */
-	u16	reserve1;			/* */
+	u16	reserve1;
+	/* Configuration info. */
 	u8	cfg_reserve1:3;
-	u8	cfg_size:2;			/* Configuration info. */
-	u8	cfg_type:2;			/* Configuration info. */
-	u8	cfg_action:1;		/* Configuration info. */
-	u8	cfg_reserve2;		/* Configuration info. */
-	u8	cfg_page:4;			/* Configuration info. */
-	u8	cfg_reserve3:4;		/* Configuration info. */
-	u8	cfg_offset;			/* Configuration info. */
-	u32	value;				/* */
-	u32	mask;				/* */
-}cmpk_set_cfg_t;
+	u8	cfg_size:2;
+	u8	cfg_type:2;
+	u8	cfg_action:1;
+	u8	cfg_reserve2;
+	u8	cfg_page:4;
+	u8	cfg_reserve3:4;
+	u8	cfg_offset;
+	u32	value;
+	u32	mask;
+} cmpk_set_cfg_t;
 
 /* 4. Both side : TX/RX query configuraton packet. The query structure is the
       same as set configuration. */
 #define		cmpk_query_cfg_t	cmpk_set_cfg_t
 
 /* 5. Multi packet feedback status. */
-typedef struct tag_tx_stats_feedback { // PJ quick rxcmd 09042007
-	// For endian transfer --> Driver will not the same as firmware structure.
-	// DW 0
+typedef struct tag_tx_stats_feedback {
+	/* For endian transfer --> Driver will not the same as
+	   firmware structure. */
+	/* DW 0 */
 	u16	reserve1;
-	u8	length;				// Command packet length
-	u8	element_id;			// Command packet type
+	u8	length;				/* Command packet length */
+	u8	element_id;			/* Command packet type */
 
-	// DW 1
-	u16	txfail;				// Tx Fail count
-	u16	txok;				// Tx ok count
+	/* DW 1 */
+	u16	txfail;				/* Tx fail count */
+	u16	txok;				/* Tx ok count */
 
-	// DW 2
-	u16	txmcok;				// tx multicast
-	u16	txretry;			// Tx Retry count
+	/* DW 2 */
+	u16	txmcok;				/* Tx multicast */
+	u16	txretry;			/* Tx retry count */
 
-	// DW 3
-	u16  txucok;				// tx unicast
-	u16	txbcok;				// tx broadcast
+	/* DW 3 */
+	u16	txucok;				/* Tx unicast */
+	u16	txbcok;				/* Tx broadcast */
 
-	// DW 4
-	u16	txbcfail;			//
-	u16	txmcfail;			//
+	/* DW 4 */
+	u16	txbcfail;
+	u16	txmcfail;
 
-	// DW 5
-	u16	reserve2;			//
-	u16	txucfail;			//
+	/* DW 5 */
+	u16	reserve2;
+	u16	txucfail;
 
-	// DW 6-8
+	/* DW 6-8 */
 	u32	txmclength;
 	u32	txbclength;
 	u32	txuclength;
 
-	// DW 9
+	/* DW 9 */
 	u16	reserve3_23;
 	u8	reserve3_1;
 	u8	rate;
-}__attribute__((packed)) cmpk_tx_status_t;
+} __packed cmpk_tx_status_t;
 
 /* 6. Debug feedback message. */
-/* 2007/10/23 MH Define RX debug message  */
+/* Define RX debug message  */
 typedef struct tag_rx_debug_message_feedback {
-	// For endian transfer --> for driver
-	// DW 0
+	/* For endian transfer --> for driver */
+	/* DW 0 */
 	u16	reserve1;
-	u8	length;				// Command packet length
-	u8	element_id;			// Command packet type
+	u8	length;				/* Command packet length */
+	u8	element_id;			/* Command packet type */
 
-	// DW 1-??
-	// Variable debug message.
+	/* DW 1-?? */
+	/* Variable debug message. */
 
-}cmpk_rx_dbginfo_t;
+} cmpk_rx_dbginfo_t;
 
-/* 2008/03/20 MH Define transmit rate history. For big endian format. */
+/* Define transmit rate history. For big endian format. */
 typedef struct tag_tx_rate_history {
-	// For endian transfer --> for driver
-	// DW 0
-	u8	element_id;			// Command packet type
-	u8	length;				// Command packet length
+	/* For endian transfer --> for driver */
+	/* DW 0 */
+	u8	element_id;			/* Command packet type */
+	u8	length;				/* Command packet length */
 	u16	reserved1;
 
-	// DW 1-2	CCK rate counter
+	/* DW 1-2	CCK rate counter */
 	u16	cck[4];
 
-	// DW 3-6
+	/* DW 3-6 */
 	u16	ofdm[8];
 
-	// DW 7-14
-	//UINT16	MCS_BW0_SG0[16];
-
-	// DW 15-22
-	//UINT16	MCS_BW1_SG0[16];
-
-	// DW 23-30
-	//UINT16	MCS_BW0_SG1[16];
-
-	// DW 31-38
-	//UINT16	MCS_BW1_SG1[16];
-
-	// DW 7-14	BW=0 SG=0
-	// DW 15-22	BW=1 SG=0
-	// DW 23-30	BW=0 SG=1
-	// DW 31-38	BW=1 SG=1
+	/* DW 7-14	BW=0 SG=0
+	 * DW 15-22	BW=1 SG=0
+	 * DW 23-30	BW=0 SG=1
+	 * DW 31-38	BW=1 SG=1
+	 */
 	u16	ht_mcs[4][16];
 
-}__attribute__((packed)) cmpk_tx_rahis_t;
+} __packed cmpk_tx_rahis_t;
 
-typedef enum tag_command_packet_directories
-{
-    RX_TX_FEEDBACK = 0,
-    RX_INTERRUPT_STATUS		= 1,
-    TX_SET_CONFIG				= 2,
-    BOTH_QUERY_CONFIG			= 3,
-    RX_TX_STATUS				= 4,
-    RX_DBGINFO_FEEDBACK		= 5,
-    RX_TX_PER_PKT_FEEDBACK		= 6,
-    RX_TX_RATE_HISTORY		= 7,
-    RX_CMD_ELE_MAX
-}cmpk_element_e;
+typedef enum tag_command_packet_directories {
+	RX_TX_FEEDBACK			= 0,
+	RX_INTERRUPT_STATUS		= 1,
+	TX_SET_CONFIG			= 2,
+	BOTH_QUERY_CONFIG		= 3,
+	RX_TX_STATUS			= 4,
+	RX_DBGINFO_FEEDBACK		= 5,
+	RX_TX_PER_PKT_FEEDBACK		= 6,
+	RX_TX_RATE_HISTORY		= 7,
+	RX_CMD_ELE_MAX
+} cmpk_element_e;
 
-typedef enum _rt_status{
+typedef enum _rt_status {
 	RT_STATUS_SUCCESS,
 	RT_STATUS_FAILURE,
 	RT_STATUS_PENDING,
 	RT_STATUS_RESOURCE
-}rt_status,*prt_status;
+} rt_status, *prt_status;
 
-extern rt_status cmpk_message_handle_tx(struct net_device *dev, u8 *codevirtualaddress, u32 packettype, u32 buffer_len);
-
-extern  u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats *pstats);
-extern rt_status SendTxCommandPacket( struct net_device *dev, void *pData, u32 DataLen);
+extern u32 cmpk_message_handle_rx(struct net_device *dev,
+		struct ieee80211_rx_stats *pstats);
+extern rt_status SendTxCommandPacket(struct net_device *dev,
+		void *pData, u32 DataLen);
 
 
 #endif
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index bb924ac..d6a6de3 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -61,20 +61,16 @@
 		/* Allocate skb buffer to contain firmware info and tx descriptor info
 		 * add 4 to avoid packet appending overflow.
 		 * */
-		#ifdef RTL8192U
 		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
-		#else
-		skb  = dev_alloc_skb(frag_length + 4);
-		#endif
+		if (!skb)
+			return false;
 		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
 		tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
 		tcb_desc->queue_index = TXCMD_QUEUE;
 		tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
 		tcb_desc->bLastIniPkt = bLastIniPkt;
 
-		#ifdef RTL8192U
 		skb_reserve(skb, USB_HWDESC_HEADER_LEN);
-		#endif
 		seg_ptr = skb->data;
 		/*
 		 * Transform from little endian to big endian
@@ -299,16 +295,10 @@
 				mapped_file = pfirmware->firmware_buf;
 				file_length = fw_entry->size;
 			} else {
-#ifdef RTL8190P
-				memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
-				mapped_file = pfirmware->firmware_buf;
-				file_length = fw_entry->size;
-#else
 				memset(pfirmware->firmware_buf,0,128);
 				memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size);
 				mapped_file = pfirmware->firmware_buf;
 				file_length = fw_entry->size + 128;
-#endif
 			}
 			pfirmware->firmware_buf_size = file_length;
 		}else if (rst_opt == OPT_FIRMWARE_RESET ) {
@@ -340,15 +330,6 @@
 			 * will set polling bit when firmware code is also configured
 			 */
 			pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
-#ifdef RTL8190P
-			// To initialize IMEM, CPU move code  from 0x80000080, hence, we send 0x80 byte packet
-			rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
-			if (rt_status != true)
-			{
-				RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
-				goto  download_firmware_fail;
-			}
-#endif
 			//mdelay(1000);
 			/*
 			 * To initialize IMEM, CPU move code  from 0x80000080,
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index a6fac08..39cd426 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -1713,7 +1713,7 @@
 		queue_delayed_work(priv->priv_wq, &priv->initialgain_operate_wq, 0);
 }
 
-extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
+void InitialGainOperateWorkItemCallBack(struct work_struct *work)
 {
 	struct delayed_work *dwork = container_of(work, struct delayed_work,
 						  work);
@@ -1799,12 +1799,6 @@
 		RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",
 			 priv->initgain_backup.cca);
 
-#ifdef RTL8190P
-		SetTxPowerLevel8190(Adapter, priv->CurrentChannel);
-#endif
-#ifdef RTL8192E
-		SetTxPowerLevel8190(Adapter, priv->CurrentChannel);
-#endif
 		rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel);
 
 		if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
diff --git a/drivers/staging/rtl8192u/r819xU_phy.h b/drivers/staging/rtl8192u/r819xU_phy.h
index f3c352a..66cbe3f 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.h
+++ b/drivers/staging/rtl8192u/r819xU_phy.h
@@ -23,7 +23,7 @@
 	u32		Para1;
 	u32		Para2;
 	u32		msDelay;
-} __attribute__ ((packed)) SwChnlCmd;
+} __packed SwChnlCmd;
 
 extern u32 rtl819XMACPHY_Array_PG[];
 extern u32 rtl819XPHY_REG_1T2RArray[];
diff --git a/drivers/staging/rtl8712/os_intfs.c b/drivers/staging/rtl8712/os_intfs.c
index 6e81ba0..82a77b4 100644
--- a/drivers/staging/rtl8712/os_intfs.c
+++ b/drivers/staging/rtl8712/os_intfs.c
@@ -141,7 +141,7 @@
 	registry_par->ssid.SsidLength = 3;
 	registry_par->channel = (u8)channel;
 	registry_par->wireless_mode = (u8)wireless_mode;
-	registry_par->vrtl_carrier_sense = (u8)vrtl_carrier_sense ;
+	registry_par->vrtl_carrier_sense = (u8)vrtl_carrier_sense;
 	registry_par->vcs_type = (u8)vcs_type;
 	registry_par->frag_thresh = (u16)frag_thresh;
 	registry_par->preamble = (u8)preamble;
diff --git a/drivers/staging/rtl8712/rtl8712_cmd.c b/drivers/staging/rtl8712/rtl8712_cmd.c
index 088647c..5b6a96e 100644
--- a/drivers/staging/rtl8712/rtl8712_cmd.c
+++ b/drivers/staging/rtl8712/rtl8712_cmd.c
@@ -62,7 +62,7 @@
 	r8712_write8(padapter, GPIO_IO_SEL, tmp1byte);
 	tmp1byte = r8712_read8(padapter, GPIO_CTRL);
 	if (tmp1byte == 0xff)
-		return ;
+		return;
 	if (tmp1byte&HAL_8192S_HW_GPIO_WPS_BIT) {
 		/* Here we only set bPbcPressed to true
 		 * After trigger PBC, the variable will be set to false */
@@ -381,7 +381,7 @@
 			*pcmdbuf = cpu_to_le32((cmdsz & 0x0000ffff) |
 					       (pcmd->cmdcode << 16) |
 					       (pcmdpriv->cmd_seq << 24));
-			pcmdbuf += 2 ; /* 8 bytes alignment */
+			pcmdbuf += 2; /* 8 bytes alignment */
 			memcpy((u8 *)pcmdbuf, pcmd->parmbuf, pcmd->cmdsz);
 			while (check_cmd_fifo(padapter, wr_sz) == _FAIL) {
 				if ((padapter->bDriverStopped == true) ||
@@ -471,11 +471,9 @@
 	if (pevt_priv->event_seq > 127)
 		pevt_priv->event_seq = 0;
 	peventbuf = peventbuf + 2; /* move to event content, 8 bytes alignment */
-	if (peventbuf) {
-		event_callback = wlanevents[evt_code].event_callback;
-		if (event_callback)
-			event_callback(padapter, (u8 *)peventbuf);
-	}
+	event_callback = wlanevents[evt_code].event_callback;
+	if (event_callback)
+		event_callback(padapter, (u8 *)peventbuf);
 	pevt_priv->evt_done_cnt++;
 _abort_event_:
 	return;
diff --git a/drivers/staging/rtl8712/rtl8712_efuse.c b/drivers/staging/rtl8712/rtl8712_efuse.c
index 377fca9..c9eeb42 100644
--- a/drivers/staging/rtl8712/rtl8712_efuse.c
+++ b/drivers/staging/rtl8712/rtl8712_efuse.c
@@ -231,7 +231,7 @@
 			/* read next header */
 			efuse_addr = efuse_addr + (word_cnts * 2) + 1;
 		} else
-			bContinual = false ;
+			bContinual = false;
 	}
 	return efuse_addr;
 }
diff --git a/drivers/staging/rtl8712/rtl8712_recv.c b/drivers/staging/rtl8712/rtl8712_recv.c
index d59a74a..ea96537 100644
--- a/drivers/staging/rtl8712/rtl8712_recv.c
+++ b/drivers/staging/rtl8712/rtl8712_recv.c
@@ -108,7 +108,7 @@
 	struct _adapter *padapter = precvpriv->adapter;
 
 	precvbuf = (struct recv_buf *)precvpriv->precv_buf;
-	for (i = 0; i < NR_RECVBUFF ; i++) {
+	for (i = 0; i < NR_RECVBUFF; i++) {
 		r8712_os_recvbuf_resource_free(padapter, precvbuf);
 		precvbuf++;
 	}
@@ -268,7 +268,7 @@
 	u8   *psta_addr;
 	struct recv_frame_hdr *pfhdr;
 	struct sta_info *psta;
-	struct	sta_priv *pstapriv ;
+	struct	sta_priv *pstapriv;
 	struct list_head *phead;
 	union recv_frame *prtnframe = NULL;
 	struct  __queue *pfree_recv_queue, *pdefrag_q;
@@ -849,7 +849,7 @@
 	} else {
 		/* (1)Get RSSI for HT rate */
 		for (i = 0; i < ((padapter->registrypriv.rf_config) &
-			    0x0f) ; i++) {
+			    0x0f); i++) {
 			rf_rx_num++;
 			rx_pwr[i] = ((pphy_head[PHY_STAT_GAIN_TRSW_SHT + i]
 				    & 0x3F) * 2) - 110;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index f16307f..7e32431 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -965,7 +965,7 @@
 			psta = r8712_alloc_stainfo(&padapter->stapriv,
 						   pnetwork->MacAddress);
 			if (psta == NULL)
-				goto createbss_cmd_fail ;
+				goto createbss_cmd_fail;
 		}
 		r8712_indicate_connect(padapter);
 	} else {
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index d58aa7e..9fec6ed 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -820,7 +820,7 @@
 			intReturn = true;
 		blInserted = false;
 		/* overwrite PMKID */
-		for (j = 0 ; j < NUM_PMKID_CACHE; j++) {
+		for (j = 0; j < NUM_PMKID_CACHE; j++) {
 			if (!memcmp(psecuritypriv->PMKIDList[j].Bssid,
 			    strIssueBssid, ETH_ALEN)) {
 				/* BSSID is matched, the same AP => rewrite
@@ -845,7 +845,7 @@
 				PMKIDIndex].PMKID, pPMK->pmkid, IW_PMKID_LEN);
 			psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].
 				bUsed = true;
-			psecuritypriv->PMKIDIndex++ ;
+			psecuritypriv->PMKIDIndex++;
 			if (psecuritypriv->PMKIDIndex == NUM_PMKID_CACHE)
 				psecuritypriv->PMKIDIndex = 0;
 		}
@@ -1598,7 +1598,7 @@
 		wep.Length = wep.KeyLength +
 			     FIELD_OFFSET(struct NDIS_802_11_WEP, KeyMaterial);
 	} else {
-		wep.KeyLength = 0 ;
+		wep.KeyLength = 0;
 		if (keyindex_provided == 1) { /* set key_id only, no given
 					       * KeyMaterial(erq->length==0).*/
 			padapter->securitypriv.PrivacyKeyIndex = key;
@@ -1880,7 +1880,7 @@
 	u32 data32;
 
 	get_user(addr, (u32 __user *)wrqu->data.pointer);
-	data32 = ((u32)wrqu->data.length<<16) | (u32)wrqu->data.flags ;
+	data32 = ((u32)wrqu->data.length<<16) | (u32)wrqu->data.flags;
 	r8712_write32(padapter, addr, data32);
 	return 0;
 }
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_rtl.c b/drivers/staging/rtl8712/rtl871x_ioctl_rtl.c
index 5d6d55e..ac0baff 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_rtl.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_rtl.c
@@ -153,7 +153,7 @@
 					 padapter->recvpriv.rx_icv_err;
 		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
 	} else
-		return RNDIS_STATUS_INVALID_LENGTH ;
+		return RNDIS_STATUS_INVALID_LENGTH;
 	return RNDIS_STATUS_SUCCESS;
 }
 
@@ -169,7 +169,7 @@
 {
 	struct _adapter *padapter = (struct _adapter *)
 				    (poid_par_priv->adapter_context);
-	u32 preamblemode = 0 ;
+	u32 preamblemode = 0;
 
 	if (poid_par_priv->type_of_oid != QUERY_OID)
 		return RNDIS_STATUS_NOT_ACCEPTED;
@@ -522,7 +522,7 @@
 	else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == true)
 		ulInfo = ADHOCMODE;
 	else
-		ulInfo = NOTASSOCIATED ;
+		ulInfo = NOTASSOCIATED;
 	*(u32 *)poid_par_priv->information_buf = ulInfo;
 	*poid_par_priv->bytes_rw =  poid_par_priv->information_buf_len;
 	return RNDIS_STATUS_SUCCESS;
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.c b/drivers/staging/rtl8712/rtl871x_mlme.c
index 6596154..8fa0f9d 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.c
+++ b/drivers/staging/rtl8712/rtl871x_mlme.c
@@ -1641,7 +1641,7 @@
 	struct wlan_network	*cur_network = &adapter->mlmepriv.cur_network;
 
 	pdev_network->Privacy = cpu_to_le32(psecuritypriv->PrivacyAlgrthm
-					    > 0 ? 1 : 0) ; /* adhoc no 802.1x */
+					    > 0 ? 1 : 0); /* adhoc no 802.1x */
 	pdev_network->Rssi = 0;
 	switch (pregistrypriv->wireless_mode) {
 	case WIRELESS_11B:
@@ -1786,7 +1786,7 @@
 	psta = r8712_get_stainfo(&padapter->stapriv,
 				 pcur_network->network.MacAddress);
 	if (psta) {
-		for (i = 0; i < 16 ; i++) {
+		for (i = 0; i < 16; i++) {
 			preorder_ctrl = &psta->recvreorder_ctrl[i];
 			preorder_ctrl->indicate_seq = 0xffff;
 			preorder_ctrl->wend_b = 0xffff;
diff --git a/drivers/staging/rtl8712/rtl871x_mp.c b/drivers/staging/rtl8712/rtl871x_mp.c
index 5638d5e..0563318 100644
--- a/drivers/staging/rtl8712/rtl871x_mp.c
+++ b/drivers/staging/rtl8712/rtl871x_mp.c
@@ -110,7 +110,7 @@
 	u16 iocmd_value	= iocmd.value;
 	u8 iocmd_idx	= iocmd.index;
 
-	cmd32 = (iocmd_class << 24) | (iocmd_value << 8) | iocmd_idx ;
+	cmd32 = (iocmd_class << 24) | (iocmd_value << 8) | iocmd_idx;
 	if (r8712_fw_cmd(pAdapter, cmd32))
 		r8712_fw_cmd_data(pAdapter, &val32, 1);
 	else
@@ -128,7 +128,7 @@
 
 	r8712_fw_cmd_data(pAdapter, &value, 0);
 	msleep(100);
-	cmd32 = (iocmd_class << 24) | (iocmd_value << 8) | iocmd_idx ;
+	cmd32 = (iocmd_class << 24) | (iocmd_value << 8) | iocmd_idx;
 	return r8712_fw_cmd(pAdapter, cmd32);
 }
 
@@ -189,8 +189,8 @@
 	u32 rf_data;
 	struct IOCMD_STRUCT iocmd;
 
-	iocmd.cmdclass	= IOCMD_CLASS_BB_RF ;
-	iocmd.value	= rf_addr ;
+	iocmd.cmdclass	= IOCMD_CLASS_BB_RF;
+	iocmd.value	= rf_addr;
 	iocmd.index	= IOCMD_RF_READ_IDX;
 	rf_data = fw_iocmd_read(pAdapter, iocmd);
 	return rf_data;
diff --git a/drivers/staging/rtl8712/rtl871x_security.c b/drivers/staging/rtl8712/rtl871x_security.c
index e33fd6d..5349669 100644
--- a/drivers/staging/rtl8712/rtl871x_security.c
+++ b/drivers/staging/rtl8712/rtl871x_security.c
@@ -835,7 +835,7 @@
 	u8 temp[4];
 	u8 tempb[4];
 
-	for (i = 0 ; i < 4; i++) {
+	for (i = 0; i < 4; i++) {
 		if ((in[i] & 0x80) == 0x80)
 			add1b[i] = 0x1b;
 		else
@@ -1187,7 +1187,7 @@
 					length = pxmitpriv->frag_len -
 						 pattrib->hdrlen -
 						 pattrib->iv_len -
-						 pattrib->icv_len ;
+						 pattrib->icv_len;
 					aes_cipher(prwskey, pattrib->
 						   hdrlen, pframe, length);
 					pframe += pxmitpriv->frag_len;
@@ -1315,7 +1315,7 @@
 		bitwise_xor(aes_out, padded_buffer, chain_buffer);
 		aes128k128d(key, chain_buffer, aes_out);
 	}
-	for (j = 0 ; j < 8; j++)
+	for (j = 0; j < 8; j++)
 		mic[j] = aes_out[j];
 	/* Insert MIC into payload */
 	for (j = 0; j < 8; j++)
diff --git a/drivers/staging/rtl8712/rtl871x_sta_mgt.c b/drivers/staging/rtl8712/rtl871x_sta_mgt.c
index 1247b3d..8db6849 100644
--- a/drivers/staging/rtl8712/rtl871x_sta_mgt.c
+++ b/drivers/staging/rtl8712/rtl871x_sta_mgt.c
@@ -138,7 +138,7 @@
 		}
 		phash_list = &(pstapriv->sta_hash[index]);
 		list_insert_tail(&psta->hash_list, phash_list);
-		pstapriv->asoc_sta_count++ ;
+		pstapriv->asoc_sta_count++;
 
 /* For the SMC router, the sequence number of first packet of WPS handshake
  * will be 0. In this case, this packet will be dropped by recv_decache function
@@ -149,7 +149,7 @@
 			memcpy(&psta->sta_recvpriv.rxcache.tid_rxseq[i],
 				&wRxSeqInitialValue, 2);
 		/* for A-MPDU Rx reordering buffer control */
-		for (i = 0; i < 16 ; i++) {
+		for (i = 0; i < 16; i++) {
 			preorder_ctrl = &psta->recvreorder_ctrl[i];
 			preorder_ctrl->padapter = pstapriv->padapter;
 			preorder_ctrl->indicate_seq = 0xffff;
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index c812d6c7..dbefa43 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -353,11 +353,6 @@
 	}
 }
 
-static u8 key_2char2num(u8 hch, u8 lch)
-{
-	return (hex_to_bin(hch) << 4) | hex_to_bin(lch);
-}
-
 /*
  * drv_init() - a device potentially for us
  *
@@ -465,16 +460,7 @@
 				r8712_efuse_pg_packet_read(padapter, offset,
 						     &pdata[i]);
 
-			if (r8712_initmac) {
-				/* Users specify the mac address */
-				int jj, kk;
-
-				for (jj = 0, kk = 0; jj < ETH_ALEN;
-				     jj++, kk += 3)
-					mac[jj] =
-					   key_2char2num(r8712_initmac[kk],
-					   r8712_initmac[kk + 1]);
-			} else {
+			if (!r8712_initmac || !mac_pton(r8712_initmac, mac)) {
 				/* Use the mac address stored in the Efuse
 				 * offset = 0x12 for usb in efuse
 				 */
diff --git a/drivers/staging/rtl8712/xmit_linux.c b/drivers/staging/rtl8712/xmit_linux.c
index 4d22bb7..0ac9130 100644
--- a/drivers/staging/rtl8712/xmit_linux.c
+++ b/drivers/staging/rtl8712/xmit_linux.c
@@ -51,7 +51,7 @@
 	pfile->pkt = pktptr;
 	pfile->cur_addr = pfile->buf_start = pktptr->data;
 	pfile->pkt_len = pfile->buf_len = pktptr->len;
-	pfile->cur_buffer = pfile->buf_start ;
+	pfile->cur_buffer = pfile->buf_start;
 }
 
 uint _r8712_pktfile_read(struct pkt_file *pfile, u8 *rmem, uint rlen)
diff --git a/drivers/staging/rts5139/rts51x_scsi.c b/drivers/staging/rts5139/rts51x_scsi.c
index 6108705..a474eed 100644
--- a/drivers/staging/rts5139/rts51x_scsi.c
+++ b/drivers/staging/rts5139/rts51x_scsi.c
@@ -973,7 +973,7 @@
 
 	rts51x_pp_status(chip, lun, status, 32);
 
-	buf_len = min(scsi_bufflen(srb), (unsigned int)sizeof(status));
+	buf_len = min_t(unsigned int, scsi_bufflen(srb), sizeof(status));
 	rts51x_set_xfer_buf(status, buf_len, srb);
 	scsi_set_resid(srb, scsi_bufflen(srb) - buf_len);
 
@@ -988,7 +988,7 @@
 
 	rts51x_read_status(chip, lun, rts51x_status, 16);
 
-	buf_len = min(scsi_bufflen(srb), (unsigned int)sizeof(rts51x_status));
+	buf_len = min_t(unsigned int, scsi_bufflen(srb), sizeof(rts51x_status));
 	rts51x_set_xfer_buf(rts51x_status, buf_len, srb);
 	scsi_set_resid(srb, scsi_bufflen(srb) - buf_len);
 
diff --git a/drivers/staging/sb105x/sb_mp_register.h b/drivers/staging/sb105x/sb_mp_register.h
index 304e1bc..16de497 100644
--- a/drivers/staging/sb105x/sb_mp_register.h
+++ b/drivers/staging/sb105x/sb_mp_register.h
@@ -15,8 +15,8 @@
 #ifndef UART_SB105X_H
 #define UART_SB105X_H
 
-/* 
- * option register 
+/*
+ * option register
  */
 
 /* Device Information Register */
diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c
index a10cdb1..5cd3eff 100644
--- a/drivers/staging/sb105x/sb_pci_mp.c
+++ b/drivers/staging/sb105x/sb_pci_mp.c
@@ -543,14 +543,14 @@
 		if (init_hw) {
 			mp_change_speed(state, NULL);
 
-			if (info->tty->termios.c_cflag & CBAUD)
+			if (info->tty && (info->tty->termios.c_cflag & CBAUD))
 				uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
 		}
 
 		info->flags |= UIF_INITIALIZED;
 
-
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+		if (info->tty)
+			clear_bit(TTY_IO_ERROR, &info->tty->flags);
 	}
 
 	if (retval && capable(CAP_SYS_ADMIN))
@@ -1216,7 +1216,7 @@
 				return (inb(mp_devs[arg].option_reg_addr+MP_OPTR_IIR0+(state->port->line/8)));
 			}
 		case TIOCGGETPORTTYPE:
-			ret = get_device_type(arg);;
+			ret = get_device_type(arg);
 			return ret;
 		case TIOCSMULTIECHO: /* set to multi-drop mode(RS422) or echo mode(RS485)*/
 			outb( ( inb(info->interface_config_addr) & ~0x03 ) | 0x01 ,  
@@ -1808,10 +1808,7 @@
     drv->tty_driver = NULL;
 
 
-    if (drv->state)
-    {
-        kfree(drv->state);
-    }
+    kfree(drv->state);
 
 }
 
diff --git a/drivers/staging/sbe-2t3e3/cpld.c b/drivers/staging/sbe-2t3e3/cpld.c
index 27365f9..c6370d3 100644
--- a/drivers/staging/sbe-2t3e3/cpld.c
+++ b/drivers/staging/sbe-2t3e3/cpld.c
@@ -240,7 +240,7 @@
 }
 
 
-extern void cpld_set_clock(struct channel *sc, u32 mode)
+void cpld_set_clock(struct channel *sc, u32 mode)
 {
 	if (sc->p.clock_source == mode)
 		return;
diff --git a/drivers/staging/sep/sep_crypto.c b/drivers/staging/sep/sep_crypto.c
index 490a31e..b9262a7 100644
--- a/drivers/staging/sep/sep_crypto.c
+++ b/drivers/staging/sep/sep_crypto.c
@@ -1134,7 +1134,7 @@
 
 	if (int_error < 0) {
 		dev_warn(&ta_ctx->sep_used->pdev->dev, "oddball page error\n");
-		return -ENOMEM;
+		return int_error;
 	} else if (int_error == 1) {
 		ta_ctx->src_sg = new_sg;
 		ta_ctx->src_sg_hold = new_sg;
@@ -1149,7 +1149,7 @@
 	if (int_error < 0) {
 		dev_warn(&ta_ctx->sep_used->pdev->dev, "walk phys error %x\n",
 			int_error);
-		return -ENOMEM;
+		return int_error;
 	} else if (int_error == 1) {
 		ta_ctx->dst_sg = new_sg;
 		ta_ctx->dst_sg_hold = new_sg;
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 6a98a20..1e80a40 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -493,8 +493,7 @@
 		 * then we skip this step altogether as restricted
 		 * memory is not available to the o/s at all.
 		 */
-		if (((*dma_ctx)->secure_dma == false) &&
-			(dma->out_map_array)) {
+		if (!(*dma_ctx)->secure_dma && dma->out_map_array) {
 
 			for (count = 0; count < dma->out_num_pages; count++) {
 				dma_unmap_page(&sep->pdev->dev,
@@ -515,8 +514,7 @@
 		}
 
 		/* Again, we do this only for non secure dma */
-		if (((*dma_ctx)->secure_dma == false) &&
-			(dma->out_page_array)) {
+		if (!(*dma_ctx)->secure_dma && dma->out_page_array) {
 
 			for (count = 0; count < dma->out_num_pages; count++) {
 				if (!PageReserved(dma->out_page_array[count]))
@@ -1263,13 +1261,8 @@
 	}
 
 	/* Convert the application virtual address into a set of physical */
-	down_read(&current->mm->mmap_sem);
-	result = get_user_pages(current, current->mm, app_virt_addr,
-		num_pages,
-		((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1),
-		0, page_array, NULL);
-
-	up_read(&current->mm->mmap_sem);
+	result = get_user_pages_fast(app_virt_addr, num_pages,
+		((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1), page_array);
 
 	/* Check the number of pages locked - if not all then exit with error */
 	if (result != num_pages) {
@@ -1952,7 +1945,7 @@
 	}
 
 	/* Check if the pages are in Kernel Virtual Address layout */
-	if (is_kva == true)
+	if (is_kva)
 		error = sep_lock_kernel_pages(sep, app_virt_addr,
 			data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG,
 			dma_ctx);
@@ -2446,7 +2439,7 @@
 	dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].out_page_array = NULL;
 
 	/* Lock the pages of the buffer and translate them to pages */
-	if (is_kva == true) {
+	if (is_kva) {
 		dev_dbg(&sep->pdev->dev, "[PID%d] Locking kernel input pages\n",
 						current->pid);
 		error = sep_lock_kernel_pages(sep, app_virt_in_addr,
@@ -2490,7 +2483,7 @@
 			goto end_function;
 		}
 
-		if (dma_ctx->secure_dma == true) {
+		if (dma_ctx->secure_dma) {
 			/* secure_dma requires use of non accessible memory */
 			dev_dbg(&sep->pdev->dev, "[PID%d] in secure_dma\n",
 				current->pid);
@@ -2727,11 +2720,11 @@
 	dcb_table_ptr->tail_data_size = 0;
 	dcb_table_ptr->out_vr_tail_pt = 0;
 
-	if (isapplet == true) {
+	if (isapplet) {
 
 		/* Check if there is enough data for DMA operation */
 		if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) {
-			if (is_kva == true) {
+			if (is_kva) {
 				error = -ENODEV;
 				goto end_function_error;
 			} else {
@@ -2772,7 +2765,7 @@
 		if (tail_size) {
 			if (tail_size > sizeof(dcb_table_ptr->tail_data))
 				return -EINVAL;
-			if (is_kva == true) {
+			if (is_kva) {
 				error = -ENODEV;
 				goto end_function_error;
 			} else {
@@ -2883,7 +2876,7 @@
 	if (!dma_ctx || !*dma_ctx) /* nothing to be done here*/
 		return 0;
 
-	if (((*dma_ctx)->secure_dma == false) && (isapplet == true)) {
+	if (!(*dma_ctx)->secure_dma && isapplet) {
 		dev_dbg(&sep->pdev->dev, "[PID%d] handling applet\n",
 			current->pid);
 
@@ -2902,7 +2895,7 @@
 				pt_hold = (unsigned long)dcb_table_ptr->
 					out_vr_tail_pt;
 				tail_pt = (void *)pt_hold;
-				if (is_kva == true) {
+				if (is_kva) {
 					error = -ENODEV;
 					break;
 				} else {
@@ -4080,6 +4073,7 @@
 	if (ret_val) {
 		dev_warn(&sep->pdev->dev, "sysfs attribute1 fails for SEP %x\n",
 			ret_val);
+		misc_deregister(&sep->miscdev_sep);
 		return ret_val;
 	}
 
diff --git a/drivers/staging/silicom/bp_mod.h b/drivers/staging/silicom/bp_mod.h
index cfa1f43..8154a7b 100644
--- a/drivers/staging/silicom/bp_mod.h
+++ b/drivers/staging/silicom/bp_mod.h
@@ -22,7 +22,7 @@
 	int  i;					\
 	if (1) {				\
 		for (i = 0; i < 1000; i++) {	\
-			udelay(x) ;		\
+			udelay(x);		\
 		}				\
 	} else {				\
 		msleep(x);			\
diff --git a/drivers/staging/silicom/bpctl_mod.c b/drivers/staging/silicom/bpctl_mod.c
index 495272d..39dc92a 100644
--- a/drivers/staging/silicom/bpctl_mod.c
+++ b/drivers/staging/silicom/bpctl_mod.c
@@ -1,11 +1,11 @@
 /******************************************************************************/
 /*                                                                            */
-/* Bypass Control utility, Copyright (c) 2005-20011 Silicom                   */
+/* Bypass Control utility, Copyright (c) 2005-2011 Silicom                    */
 /*                                                                            */
 /* This program is free software; you can redistribute it and/or modify       */
 /* it under the terms of the GNU General Public License as published by       */
 /* the Free Software Foundation, located in the file LICENSE.                 */
-/*  Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.          */
+/* Copyright(c) 2007 - 2009, 2013 Intel Corporation. All rights reserved.     */
 /*                                                                            */
 /*                                                                            */
 /******************************************************************************/
@@ -124,80 +124,60 @@
 int is_bypass_fn(struct bpctl_dev *pbpctl_dev);
 int get_dev_idx_bsf(int bus, int slot, int func);
 
-static unsigned long str_to_hex(char *p);
+static int bp_get_dev_idx_bsf(struct net_device *dev, int *index)
+{
+	struct ethtool_drvinfo drvinfo = {0};
+	char *buf;
+	int bus, slot, func;
+
+	if (dev->ethtool_ops && dev->ethtool_ops->get_drvinfo)
+		dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
+	else
+		return -EOPNOTSUPP;
+
+	if (!drvinfo.bus_info)
+		return -ENODATA;
+	if (!strcmp(drvinfo.bus_info, "N/A"))
+		return -ENODATA;
+
+	buf = strchr(drvinfo.bus_info, ':');
+	if (!buf)
+		return -EINVAL;
+	buf++;
+	if (sscanf(buf, "%x:%x.%x", &bus, &slot, &func) != 3)
+		return -EINVAL;
+
+	*index = get_dev_idx_bsf(bus, slot, func);
+	return 0;
+}
+
 static int bp_device_event(struct notifier_block *unused,
 			   unsigned long event, void *ptr)
 {
 	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
 	static struct bpctl_dev *pbpctl_dev, *pbpctl_dev_m;
 	int dev_num = 0, ret = 0, ret_d = 0, time_left = 0;
+
 	/* printk("BP_PROC_SUPPORT event =%d %s %d\n", event,dev->name, dev->ifindex ); */
 	/* return NOTIFY_DONE; */
 	if (!dev)
 		return NOTIFY_DONE;
+
 	if (event == NETDEV_REGISTER) {
-		{
-			struct ethtool_drvinfo drvinfo;
-			char cbuf[32];
-			char *buf = NULL;
-			char res[10];
-			int i = 0, ifindex, idx_dev = 0;
-			int bus = 0, slot = 0, func = 0;
-			ifindex = dev->ifindex;
+		int idx_dev;
 
-			memset(res, 0, 10);
-			memset(&drvinfo, 0, sizeof(struct ethtool_drvinfo));
+		if (bp_get_dev_idx_bsf(dev, &idx_dev))
+			return NOTIFY_DONE;
 
-			if (dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) {
-				memset(&drvinfo, 0, sizeof(drvinfo));
-				dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
-			} else
-				return NOTIFY_DONE;
-			if (!drvinfo.bus_info)
-				return NOTIFY_DONE;
-			if (!strcmp(drvinfo.bus_info, "N/A"))
-				return NOTIFY_DONE;
-			memcpy(&cbuf, drvinfo.bus_info, 32);
-			buf = &cbuf[0];
+		if (idx_dev == -1)
+			return NOTIFY_DONE;
 
-			while (*buf++ != ':')
-				;
-			for (i = 0; i < 10; i++, buf++) {
-				if (*buf == ':')
-					break;
-				res[i] = *buf;
+		bpctl_dev_arr[idx_dev].ifindex = dev->ifindex;
+		bpctl_dev_arr[idx_dev].ndev = dev;
 
-			}
-			buf++;
-			bus = str_to_hex(res);
-			memset(res, 0, 10);
-
-			for (i = 0; i < 10; i++, buf++) {
-				if (*buf == '.')
-					break;
-				res[i] = *buf;
-
-			}
-			buf++;
-			slot = str_to_hex(res);
-			func = str_to_hex(buf);
-			idx_dev = get_dev_idx_bsf(bus, slot, func);
-
-			if (idx_dev != -1) {
-
-				bpctl_dev_arr[idx_dev].ifindex = ifindex;
-				bpctl_dev_arr[idx_dev].ndev = dev;
-
-				bypass_proc_remove_dev_sd(&bpctl_dev_arr
-							  [idx_dev]);
-				bypass_proc_create_dev_sd(&bpctl_dev_arr
-							  [idx_dev]);
-
-			}
-
-		}
+		bypass_proc_remove_dev_sd(&bpctl_dev_arr[idx_dev]);
+		bypass_proc_create_dev_sd(&bpctl_dev_arr[idx_dev]);
 		return NOTIFY_DONE;
-
 	}
 	if (event == NETDEV_UNREGISTER) {
 		int idx_dev = 0;
@@ -5269,36 +5249,6 @@
 	return -1;
 }
 
-static void str_low(char *str)
-{
-	int i;
-
-	for (i = 0; i < strlen(str); i++)
-		if ((str[i] >= 65) && (str[i] <= 90))
-			str[i] += 32;
-}
-
-static unsigned long str_to_hex(char *p)
-{
-	unsigned long hex = 0;
-	unsigned long length = strlen(p), shift = 0;
-	unsigned char dig = 0;
-
-	str_low(p);
-	length = strlen(p);
-
-	if (length == 0)
-		return 0;
-
-	do {
-		dig = p[--length];
-		dig = dig < 'a' ? (dig - '0') : (dig - 'a' + 0xa);
-		hex |= (dig << shift);
-		shift += 4;
-	} while (length);
-	return hex;
-}
-
 static int get_dev_idx(int ifindex)
 {
 	int idx_dev = 0;
@@ -5329,70 +5279,26 @@
 
 static void if_scan_init(void)
 {
-	int idx_dev = 0;
 	struct net_device *dev;
-	int ifindex;
+
 	/* rcu_read_lock(); */
 	/* rtnl_lock();     */
 	/* rcu_read_lock(); */
 
 	for_each_netdev(&init_net, dev) {
+		int idx_dev;
 
-		struct ethtool_drvinfo drvinfo;
-		char cbuf[32];
-		char *buf = NULL;
-		char res[10];
-		int i = 0;
-		int bus = 0, slot = 0, func = 0;
-		ifindex = dev->ifindex;
-
-		memset(res, 0, 10);
-		memset(&drvinfo, 0, sizeof(struct ethtool_drvinfo));
-
-		if (dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) {
-			memset(&drvinfo, 0, sizeof(drvinfo));
-			dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
-		} else
+		if (bp_get_dev_idx_bsf(dev, &idx_dev))
 			continue;
-		if (!strcmp(drvinfo.bus_info, "N/A"))
+
+		if (idx_dev == -1)
 			continue;
-		memcpy(&cbuf, drvinfo.bus_info, 32);
-		buf = &cbuf[0];
 
-		while (*buf++ != ':')
-			;
-		for (i = 0; i < 10; i++, buf++) {
-			if (*buf == ':')
-				break;
-			res[i] = *buf;
-
-		}
-		buf++;
-		bus = str_to_hex(res);
-		memset(res, 0, 10);
-
-		for (i = 0; i < 10; i++, buf++) {
-			if (*buf == '.')
-				break;
-			res[i] = *buf;
-
-		}
-		buf++;
-		slot = str_to_hex(res);
-		func = str_to_hex(buf);
-		idx_dev = get_dev_idx_bsf(bus, slot, func);
-
-		if (idx_dev != -1) {
-
-			bpctl_dev_arr[idx_dev].ifindex = ifindex;
-			bpctl_dev_arr[idx_dev].ndev = dev;
-
-		}
-
+		bpctl_dev_arr[idx_dev].ifindex = dev->ifindex;
+		bpctl_dev_arr[idx_dev].ndev = dev;
 	}
 	/* rtnl_unlock();     */
 	/* rcu_read_unlock(); */
-
 }
 
 static long device_ioctl(struct file *file,	/* see include/linux/fs.h */
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 869dcd3..652272b 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -62,6 +62,7 @@
 #define SLIC_OFFLOAD_IP_CHECKSUM		1
 #define STATS_TIMER_INTERVAL			2
 #define PING_TIMER_INTERVAL			    1
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -791,8 +792,8 @@
 			struct mcast_address *mcaddr = adapter->mcastaddrs;
 
 			while (mcaddr) {
-				if (!compare_ether_addr(mcaddr->address,
-							ether_frame->ether_dhost)) {
+				if (ether_addr_equal(mcaddr->address,
+						     ether_frame->ether_dhost)) {
 					adapter->rcv_multicasts++;
 					netdev->stats.multicast++;
 					return true;
@@ -1834,7 +1835,7 @@
 #endif
 
 	seq_printf(seq, "driver_version           : %s\n", slic_proc_version);
-	seq_printf(seq, "Microcode versions:           \n");
+	seq_puts(seq, "Microcode versions:           \n");
 	seq_printf(seq, "    Gigabit (gb)         : %s %s\n",
 		    MOJAVE_UCODE_VERS_STRING, MOJAVE_UCODE_VERS_DATE);
 	seq_printf(seq, "    Gigabit Receiver     : %s %s\n",
@@ -1865,8 +1866,8 @@
 			   config->macinfo[i].macaddrA[4],
 			   config->macinfo[i].macaddrA[5]);
 	}
-	seq_printf(seq, "     IF  Init State Duplex/Speed irq\n");
-	seq_printf(seq, "     -------------------------------\n");
+	seq_puts(seq, "     IF  Init State Duplex/Speed irq\n");
+	seq_puts(seq, "     -------------------------------\n");
 	for (i = 0; i < card->adapters_allocated; i++) {
 		struct adapter *adapter;
 
@@ -1909,7 +1910,7 @@
 	switch (config->FruFormat) {
 	case ATK_FRU_FORMAT:
 		{
-			seq_printf(seq,
+			seq_puts(seq,
 			    "Vendor                   : Alacritech, Inc.\n");
 			seq_printf(seq,
 			    "Assembly #               : %c%c%c%c%c%c\n",
@@ -1942,9 +1943,9 @@
 
 	default:
 		{
-			seq_printf(seq,
+			seq_puts(seq,
 			    "Vendor                   : Alacritech, Inc.\n");
-			seq_printf(seq,
+			seq_puts(seq,
 			    "Serial   #               : Empty FRU\n");
 			break;
 		}
@@ -1953,7 +1954,7 @@
 	switch (config->OEMFruFormat) {
 	case VENDOR1_FRU_FORMAT:
 		{
-			seq_printf(seq, "FRU Information:\n");
+			seq_puts(seq, "FRU Information:\n");
 			seq_printf(seq, "    Commodity #          : %c\n",
 				    oemfru[0]);
 			seq_printf(seq,
@@ -1976,7 +1977,7 @@
 
 	case VENDOR2_FRU_FORMAT:
 		{
-			seq_printf(seq, "FRU Information:\n");
+			seq_puts(seq, "FRU Information:\n");
 			seq_printf(seq,
 				    "    Part     #           : "
 				    "%c%c%c%c%c%c%c%c\n",
@@ -1999,12 +2000,12 @@
 
 	case VENDOR3_FRU_FORMAT:
 		{
-			seq_printf(seq, "FRU Information:\n");
+			seq_puts(seq, "FRU Information:\n");
 		}
 
 	case VENDOR4_FRU_FORMAT:
 		{
-			seq_printf(seq, "FRU Information:\n");
+			seq_puts(seq, "FRU Information:\n");
 			seq_printf(seq,
 				    "    FRU Number           : "
 				    "%c%c%c%c%c%c%c%c\n",
@@ -2231,14 +2232,8 @@
 		if (adapter)
 			slic_debug_adapter_destroy(adapter);
 	}
-	if (card->debugfs_cardinfo) {
-		debugfs_remove(card->debugfs_cardinfo);
-		card->debugfs_cardinfo = NULL;
-	}
-	if (card->debugfs_dir) {
-		debugfs_remove(card->debugfs_dir);
-		card->debugfs_dir = NULL;
-	}
+	debugfs_remove(card->debugfs_cardinfo);
+	debugfs_remove(card->debugfs_dir);
 }
 
 static void slic_debug_init(void)
@@ -2256,10 +2251,7 @@
 
 static void slic_debug_cleanup(void)
 {
-	if (slic_debugfs) {
-		debugfs_remove(slic_debugfs);
-		slic_debugfs = NULL;
-	}
+	debugfs_remove(slic_debugfs);
 }
 
 /*
@@ -2333,7 +2325,7 @@
 	/* Check to see if it already exists */
 	mlist = adapter->mcastaddrs;
 	while (mlist) {
-		if (!compare_ether_addr(mlist->address, address))
+		if (ether_addr_equal(mlist->address, address))
 			return 0;
 		mlist = mlist->next;
 	}
@@ -2627,6 +2619,67 @@
 	adapter->max_isr_xmits = max(adapter->max_isr_xmits, frames);
 }
 
+static void slic_interrupt_card_up(u32 isr, struct adapter *adapter,
+			struct net_device *dev)
+{
+	if (isr & ~ISR_IO) {
+		if (isr & ISR_ERR) {
+			adapter->error_interrupts++;
+			if (isr & ISR_RMISS) {
+				int count;
+				int pre_count;
+				int errors;
+
+				struct slic_rcvqueue *rcvq =
+					&adapter->rcvqueue;
+
+				adapter->error_rmiss_interrupts++;
+
+				if (!rcvq->errors)
+					rcv_count = rcvq->count;
+				pre_count = rcvq->count;
+				errors = rcvq->errors;
+
+				while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
+					count = slic_rcvqueue_fill(adapter);
+					if (!count)
+						break;
+				}
+			} else if (isr & ISR_XDROP) {
+				dev_err(&dev->dev,
+						"isr & ISR_ERR [%x] "
+						"ISR_XDROP \n", isr);
+			} else {
+				dev_err(&dev->dev,
+						"isr & ISR_ERR [%x]\n",
+						isr);
+			}
+		}
+
+		if (isr & ISR_LEVENT) {
+			adapter->linkevent_interrupts++;
+			slic_link_event_handler(adapter);
+		}
+
+		if ((isr & ISR_UPC) || (isr & ISR_UPCERR) ||
+		    (isr & ISR_UPCBSY)) {
+			adapter->upr_interrupts++;
+			slic_upr_request_complete(adapter, isr);
+		}
+	}
+
+	if (isr & ISR_RCV) {
+		adapter->rcv_interrupts++;
+		slic_rcv_handler(adapter);
+	}
+
+	if (isr & ISR_CMD) {
+		adapter->xmit_interrupts++;
+		slic_xmit_complete(adapter);
+	}
+}
+
+
 static irqreturn_t slic_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
@@ -2641,64 +2694,7 @@
 		adapter->num_isrs++;
 		switch (adapter->card->state) {
 		case CARD_UP:
-			if (isr & ~ISR_IO) {
-				if (isr & ISR_ERR) {
-					adapter->error_interrupts++;
-					if (isr & ISR_RMISS) {
-						int count;
-						int pre_count;
-						int errors;
-
-						struct slic_rcvqueue *rcvq =
-						    &adapter->rcvqueue;
-
-						adapter->
-						    error_rmiss_interrupts++;
-						if (!rcvq->errors)
-							rcv_count = rcvq->count;
-						pre_count = rcvq->count;
-						errors = rcvq->errors;
-
-						while (rcvq->count <
-						       SLIC_RCVQ_FILLTHRESH) {
-							count =
-							    slic_rcvqueue_fill
-							    (adapter);
-							if (!count)
-								break;
-						}
-					} else if (isr & ISR_XDROP) {
-						dev_err(&dev->dev,
-							"isr & ISR_ERR [%x] "
-							"ISR_XDROP \n", isr);
-					} else {
-						dev_err(&dev->dev,
-							"isr & ISR_ERR [%x]\n",
-							isr);
-					}
-				}
-
-				if (isr & ISR_LEVENT) {
-					adapter->linkevent_interrupts++;
-					slic_link_event_handler(adapter);
-				}
-
-				if ((isr & ISR_UPC) ||
-				    (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
-					adapter->upr_interrupts++;
-					slic_upr_request_complete(adapter, isr);
-				}
-			}
-
-			if (isr & ISR_RCV) {
-				adapter->rcv_interrupts++;
-				slic_rcv_handler(adapter);
-			}
-
-			if (isr & ISR_CMD) {
-				adapter->xmit_interrupts++;
-				slic_xmit_complete(adapter);
-			}
+			slic_interrupt_card_up(isr, adapter, dev);
 			break;
 
 		case CARD_DOWN:
@@ -3645,16 +3641,15 @@
 		return err;
 
 	if (slic_debug > 0 && did_version++ == 0) {
-		printk(KERN_DEBUG "%s\n", slic_banner);
-		printk(KERN_DEBUG "%s\n", slic_proc_version);
+		dev_dbg(&pcidev->dev, "%s\n", slic_banner);
+		dev_dbg(&pcidev->dev, "%s\n", slic_proc_version);
 	}
 
 	if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) {
 		pci_using_dac = 1;
 		err = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64));
 		if (err) {
-			dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for "
-					"consistent allocations\n");
+			dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for consistent allocations\n");
 			goto err_out_disable_pci;
 		}
 	} else {
@@ -3776,8 +3771,7 @@
 	slic_init_driver();
 
 	if (debug >= 0 && slic_debug != debug)
-		printk(KERN_DEBUG KBUILD_MODNAME ": debug level is %d.\n",
-		       debug);
+		pr_debug("debug level is %d.\n", debug);
 	if (debug >= 0)
 		slic_debug = debug;
 
diff --git a/drivers/staging/sm7xxfb/sm7xxfb.c b/drivers/staging/sm7xxfb/sm7xxfb.c
index 8add64b..ba199ff 100644
--- a/drivers/staging/sm7xxfb/sm7xxfb.c
+++ b/drivers/staging/sm7xxfb/sm7xxfb.c
@@ -130,7 +130,8 @@
 	for (i = 0; i < ARRAY_SIZE(vesa_mode_table); i++) {
 		if (strstr(options, vesa_mode_table[i].index)) {
 			smtc_scr_info.lfb_width  = vesa_mode_table[i].lfb_width;
-			smtc_scr_info.lfb_height = vesa_mode_table[i].lfb_height;
+			smtc_scr_info.lfb_height =
+						vesa_mode_table[i].lfb_height;
 			smtc_scr_info.lfb_depth  = vesa_mode_table[i].lfb_depth;
 			return 0;
 		}
@@ -259,8 +260,7 @@
 			if (sfb->fb.var.bits_per_pixel == 16) {
 				u32 *pal = sfb->fb.pseudo_palette;
 				val = chan_to_field(red, &sfb->fb.var.red);
-				val |= chan_to_field(green, \
-						&sfb->fb.var.green);
+				val |= chan_to_field(green, &sfb->fb.var.green);
 				val |= chan_to_field(blue, &sfb->fb.var.blue);
 #ifdef __BIG_ENDIAN
 				pal[regno] =
@@ -274,8 +274,7 @@
 			} else {
 				u32 *pal = sfb->fb.pseudo_palette;
 				val = chan_to_field(red, &sfb->fb.var.red);
-				val |= chan_to_field(green, \
-						&sfb->fb.var.green);
+				val |= chan_to_field(green, &sfb->fb.var.green);
 				val |= chan_to_field(blue, &sfb->fb.var.blue);
 #ifdef __BIG_ENDIAN
 				val =
@@ -508,9 +507,9 @@
 
 			/* init SEQ register SR30 - SR75 */
 			for (i = 0; i < SIZE_SR30_SR75; i++)
-				if (((i + 0x30) != 0x62) \
-					&& ((i + 0x30) != 0x6a) \
-					&& ((i + 0x30) != 0x6b))
+				if ((i + 0x30) != 0x62 &&
+				    (i + 0x30) != 0x6a &&
+				    (i + 0x30) != 0x6b)
 					smtc_seqw(i + 0x30,
 						VGAMode[j].Init_SR30_SR75[i]);
 
@@ -933,7 +932,6 @@
 	struct smtcfb_info *sfb;
 
 	sfb = pci_get_drvdata(pdev);
-	pci_set_drvdata(pdev, NULL);
 	smtc_unmap_smem(sfb);
 	smtc_unmap_mmio(sfb);
 	unregister_framebuffer(&sfb->fb);
diff --git a/drivers/staging/speakup/Kconfig b/drivers/staging/speakup/Kconfig
index 8c3e7a6..efd6f45 100644
--- a/drivers/staging/speakup/Kconfig
+++ b/drivers/staging/speakup/Kconfig
@@ -51,6 +51,7 @@
 
 config SPEAKUP_SYNTH_ACNTPC
 	tristate "Accent PC synthesizer support"
+	depends on ISA || COMPILE_TEST
 	---help---
 		This is the Speakup driver for the accent pc
 		synthesizer.  You can say y to build it into the kernel,
@@ -102,6 +103,7 @@
 
 config SPEAKUP_SYNTH_DECPC
 	depends on m
+	depends on ISA || COMPILE_TEST
 	tristate "DECtalk PC (big ISA card) synthesizer support"
 	---help---
 
@@ -124,6 +126,7 @@
 
 config SPEAKUP_SYNTH_DTLK
 	tristate "DoubleTalk PC synthesizer support"
+	depends on ISA || COMPILE_TEST
 	---help---
 
 		This is the Speakup driver for the internal DoubleTalk
@@ -134,6 +137,7 @@
 
 config SPEAKUP_SYNTH_KEYPC
 	tristate "Keynote Gold PC synthesizer support"
+	depends on ISA || COMPILE_TEST
 	---help---
 
 		This is the Speakup driver for the Keynote Gold
diff --git a/drivers/staging/speakup/kobjects.c b/drivers/staging/speakup/kobjects.c
index 51bdea3..e2f597e 100644
--- a/drivers/staging/speakup/kobjects.c
+++ b/drivers/staging/speakup/kobjects.c
@@ -586,6 +586,25 @@
 EXPORT_SYMBOL_GPL(spk_var_show);
 
 /*
+ * Used to reset either default_pitch or default_vol.
+ */
+static inline void spk_reset_default_value(char *header_name,
+					int *synth_default_value, int idx)
+{
+	struct st_var_header *param;
+
+	if (synth && synth_default_value) {
+		param = spk_var_header_by_name(header_name);
+		if (param)  {
+			spk_set_num_var(synth_default_value[idx],
+					param, E_NEW_DEFAULT);
+			spk_set_num_var(0, param, E_DEFAULT);
+			pr_info("%s reset to default value\n", param->name);
+		}
+	}
+}
+
+/*
  * This function is called when a user echos a value to one of the
  * variable parameters.
  */
@@ -597,7 +616,7 @@
 	int len;
 	char *cp;
 	struct var_t *var_data;
-	int value;
+	long value;
 	unsigned long flags;
 
 	param = spk_var_header_by_name(attr->attr.name);
@@ -619,61 +638,54 @@
 			len = E_INC;
 		else
 			len = E_SET;
-		value = simple_strtol(cp, NULL, 10);
-		ret = spk_set_num_var(value, param, len);
+		if (kstrtol(cp, 10, &value) == 0)
+			ret = spk_set_num_var(value, param, len);
+		else
+			pr_warn("overflow or parsing error has occured");
 		if (ret == -ERANGE) {
 			var_data = param->data;
 			pr_warn("value for %s out of range, expect %d to %d\n",
-				attr->attr.name,
+				param->name,
 				var_data->u.n.low, var_data->u.n.high);
 		}
+
+	       /*
+		* If voice was just changed, we might need to reset our default
+		* pitch and volume.
+		*/
+		if (param->var_id == VOICE && synth &&
+		    (ret == 0 || ret == -ERESTART)) {
+			var_data = param->data;
+			value = var_data->u.n.value;
+			spk_reset_default_value("pitch", synth->default_pitch,
+				value);
+			spk_reset_default_value("vol", synth->default_vol,
+				value);
+		}
 		break;
 	case VAR_STRING:
-		len = strlen(buf);
-		if ((len >= 1) && (buf[len - 1] == '\n'))
+		len = strlen(cp);
+		if ((len >= 1) && (cp[len - 1] == '\n'))
 			--len;
-		if ((len >= 2) && (buf[0] == '"') && (buf[len - 1] == '"')) {
-			++buf;
+		if ((len >= 2) && (cp[0] == '"') && (cp[len - 1] == '"')) {
+			++cp;
 			len -= 2;
 		}
-		cp = (char *) buf;
 		cp[len] = '\0';
-		ret = spk_set_string_var(buf, param, len);
+		ret = spk_set_string_var(cp, param, len);
 		if (ret == -E2BIG)
 			pr_warn("value too long for %s\n",
-					attr->attr.name);
+					param->name);
 		break;
 	default:
 		pr_warn("%s unknown type %d\n",
 			param->name, (int)param->var_type);
 	break;
 	}
-	/*
-	 * If voice was just changed, we might need to reset our default
-	 * pitch and volume.
-	 */
-	if (strcmp(attr->attr.name, "voice") == 0) {
-		if (synth && synth->default_pitch) {
-			param = spk_var_header_by_name("pitch");
-			if (param)  {
-				spk_set_num_var(synth->default_pitch[value],
-						param, E_NEW_DEFAULT);
-				spk_set_num_var(0, param, E_DEFAULT);
-			}
-		}
-		if (synth && synth->default_vol) {
-			param = spk_var_header_by_name("vol");
-			if (param)  {
-				spk_set_num_var(synth->default_vol[value],
-						param, E_NEW_DEFAULT);
-				spk_set_num_var(0, param, E_DEFAULT);
-			}
-		}
-	}
 	spin_unlock_irqrestore(&speakup_info.spinlock, flags);
 
 	if (ret == -ERESTART)
-		pr_info("%s reset to default value\n", attr->attr.name);
+		pr_info("%s reset to default value\n", param->name);
 	return count;
 }
 EXPORT_SYMBOL_GPL(spk_var_store);
diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c
index 14079c4..47502fa 100644
--- a/drivers/staging/speakup/main.c
+++ b/drivers/staging/speakup/main.c
@@ -90,7 +90,7 @@
 	{"repeats", "()", CH_RPT},
 	{"extended numeric", "", B_EXNUM},
 	{"symbols", "", B_SYM},
-	{0, 0}
+	{NULL, NULL}
 };
 
 static char mark_cut_flag;
diff --git a/drivers/staging/speakup/speakup_acntpc.c b/drivers/staging/speakup/speakup_acntpc.c
index 80141ac..1c8a7f4 100644
--- a/drivers/staging/speakup/speakup_acntpc.c
+++ b/drivers/staging/speakup/speakup_acntpc.c
@@ -223,7 +223,7 @@
 		if (ch == '\n')
 			ch = PROCSPEECH;
 		outb_p(ch, speakup_info.port_tts);
-		if (jiffies >= jiff_max && ch == SPACE) {
+		if (time_after_eq(jiffies, jiff_max) && ch == SPACE) {
 			timeout = SPK_XMITR_TIMEOUT;
 			while (synth_writable()) {
 				if (!--timeout)
diff --git a/drivers/staging/speakup/speakup_apollo.c b/drivers/staging/speakup/speakup_apollo.c
index 95d3132..70cf159 100644
--- a/drivers/staging/speakup/speakup_apollo.c
+++ b/drivers/staging/speakup/speakup_apollo.c
@@ -179,7 +179,7 @@
 			schedule_timeout(msecs_to_jiffies(full_time_val));
 			continue;
 		}
-		if ((jiffies >= jiff_max) && (ch == SPACE)) {
+		if (time_after_eq(jiffies, jiff_max) && (ch == SPACE)) {
 			spin_lock_irqsave(&speakup_info.spinlock, flags);
 			jiffy_delta_val = jiffy_delta->u.n.value;
 			full_time_val = full_time->u.n.value;
diff --git a/drivers/staging/speakup/speakup_audptr.c b/drivers/staging/speakup/speakup_audptr.c
index 3508aee..61a3cee 100644
--- a/drivers/staging/speakup/speakup_audptr.c
+++ b/drivers/staging/speakup/speakup_audptr.c
@@ -39,7 +39,7 @@
 	{ RATE, .u.n = {"\x05[r%d]", 10, 0, 20, 100, -10, NULL } },
 	{ PITCH, .u.n = {"\x05[f%d]", 80, 39, 4500, 0, 0, NULL } },
 	{ VOL, .u.n = {"\x05[g%d]", 21, 0, 40, 0, 0, NULL } },
-	{ TONE, .u.n = {"\x05[s%d]", 9, 0, 63, 0, 0, 0 } },
+	{ TONE, .u.n = {"\x05[s%d]", 9, 0, 63, 0, 0, NULL } },
 	{ PUNCT, .u.n = {"\x05[A%c]", 0, 0, 3, 0, 0, "nmsa" } },
 	{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
 	V_LAST_VAR
diff --git a/drivers/staging/speakup/varhandlers.c b/drivers/staging/speakup/varhandlers.c
index 9aa2a78..445a3fd 100644
--- a/drivers/staging/speakup/varhandlers.c
+++ b/drivers/staging/speakup/varhandlers.c
@@ -46,7 +46,7 @@
 	{ "direct", DIRECT, VAR_NUM, NULL, NULL },
 };
 
-static struct st_var_header *var_ptrs[MAXVARS] = { 0, 0, 0 };
+static struct st_var_header *var_ptrs[MAXVARS] = { NULL, NULL, NULL };
 
 static struct punc_var_t punc_vars[] = {
 	{ PUNC_SOME, 1 },
@@ -280,7 +280,7 @@
 	if (!cp)
 		cp = spk_punc_info[which].value;
 	else {
-		for ( ; *cp; cp++) {
+		for (; *cp; cp++) {
 			if (*cp < SPACE)
 				break;
 			if (mask < PUNC) {
@@ -294,11 +294,11 @@
 		cp = (u_char *)input;
 	}
 	if (how&2) {
-		for ( ; *cp; cp++)
+		for (; *cp; cp++)
 			if (*cp > SPACE)
 				spk_chartab[*cp] |= mask;
 	} else {
-		for ( ; *cp; cp++)
+		for (; *cp; cp++)
 			if (*cp > SPACE)
 				spk_chartab[*cp] &= ~mask;
 	}
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index 386362c..28b3930 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -911,8 +911,6 @@
 
 	rmi4_data->input_dev = input_allocate_device();
 	if (rmi4_data->input_dev == NULL) {
-		dev_err(&client->dev, "%s:input device alloc failed\n",
-						__func__);
 		retval = -ENOMEM;
 		goto err_input;
 	}
diff --git a/drivers/staging/tidspbridge/rmgr/dspdrv.c b/drivers/staging/tidspbridge/rmgr/dspdrv.c
index d460f58..012e4a3 100644
--- a/drivers/staging/tidspbridge/rmgr/dspdrv.c
+++ b/drivers/staging/tidspbridge/rmgr/dspdrv.c
@@ -36,7 +36,7 @@
 
 /*
  *  ======== dsp_init ========
- *  	Allocates bridge resources. Loads a base image onto DSP, if specified.
+ *  Allocates bridge resources. Loads a base image onto DSP, if specified.
  */
 u32 dsp_init(u32 *init_status)
 {
@@ -106,7 +106,7 @@
 
 /*
  *  ======== dsp_deinit ========
- *  	Frees the resources allocated for bridge.
+ *  Frees the resources allocated for bridge.
  */
 bool dsp_deinit(u32 device_context)
 {
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c
index d8957a5..76a1ff0 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/staging/usbip/stub_dev.c
@@ -357,8 +357,9 @@
 	busid_priv = get_busid_priv(udev_busid);
 	if (!busid_priv || (busid_priv->status == STUB_BUSID_REMOV) ||
 	    (busid_priv->status == STUB_BUSID_OTHER)) {
-		dev_info(&interface->dev, "%s is not in match_busid table... "
-			 "skip!\n", udev_busid);
+		dev_info(&interface->dev,
+			"%s is not in match_busid table... skip!\n",
+			udev_busid);
 
 		/*
 		 * Return value should be ENODEV or ENOXIO to continue trying
@@ -375,8 +376,10 @@
 	}
 
 	if (!strcmp(udev->bus->bus_name, "vhci_hcd")) {
-		dev_dbg(&udev->dev, "%s is attached on vhci_hcd... skip!\n",
-			 udev_busid);
+		dev_dbg(&udev->dev,
+			"%s is attached on vhci_hcd... skip!\n",
+			udev_busid);
+
 		return -ENODEV;
 	}
 
@@ -386,10 +389,10 @@
 			return -ENODEV;
 
 		busid_priv->interf_count++;
-		dev_info(&interface->dev, "usbip-host: register new interface "
-			 "(bus %u dev %u ifn %u)\n",
-			 udev->bus->busnum, udev->devnum,
-			 interface->cur_altsetting->desc.bInterfaceNumber);
+		dev_info(&interface->dev,
+			"usbip-host: register new interface (bus %u dev %u ifn %u)\n",
+			udev->bus->busnum, udev->devnum,
+			interface->cur_altsetting->desc.bInterfaceNumber);
 
 		/* set private data to usb_interface */
 		usb_set_intfdata(interface, sdev);
@@ -412,9 +415,10 @@
 	if (!sdev)
 		return -ENOMEM;
 
-	dev_info(&interface->dev, "usbip-host: register new device "
-		 "(bus %u dev %u ifn %u)\n", udev->bus->busnum, udev->devnum,
-		 interface->cur_altsetting->desc.bInterfaceNumber);
+	dev_info(&interface->dev,
+		"usbip-host: register new device (bus %u dev %u ifn %u)\n",
+		udev->bus->busnum, udev->devnum,
+		interface->cur_altsetting->desc.bInterfaceNumber);
 
 	busid_priv->interf_count = 0;
 	busid_priv->shutdown_busid = 0;
diff --git a/drivers/staging/usbip/stub_main.c b/drivers/staging/usbip/stub_main.c
index 33027cc..baf857f 100644
--- a/drivers/staging/usbip/stub_main.c
+++ b/drivers/staging/usbip/stub_main.c
@@ -255,14 +255,14 @@
 	}
 
 	ret = usb_register(&stub_driver);
-	if (ret < 0) {
+	if (ret) {
 		pr_err("usb_register failed %d\n", ret);
 		goto err_usb_register;
 	}
 
 	ret = driver_create_file(&stub_driver.drvwrap.driver,
 				 &driver_attr_match_busid);
-	if (ret < 0) {
+	if (ret) {
 		pr_err("driver_create_file failed\n");
 		goto err_create_file;
 	}
diff --git a/drivers/staging/usbip/userspace/configure.ac b/drivers/staging/usbip/userspace/configure.ac
index 2be4060..0ee5d92 100644
--- a/drivers/staging/usbip/userspace/configure.ac
+++ b/drivers/staging/usbip/userspace/configure.ac
@@ -70,7 +70,6 @@
 		       [AC_MSG_RESULT([not found]); exit 1])
 	     else
 		     AC_MSG_RESULT([no]);
-		     LIBS="$saved_LIBS"
 	     fi],
 	    dnl [ACTION-IF-NOT-GIVEN]
 	    [AC_MSG_RESULT([(default)])
diff --git a/drivers/staging/usbip/userspace/doc/usbip.8 b/drivers/staging/usbip/userspace/doc/usbip.8
index ccdadc8..a6097be 100644
--- a/drivers/staging/usbip/userspace/doc/usbip.8
+++ b/drivers/staging/usbip/userspace/doc/usbip.8
@@ -3,7 +3,7 @@
 usbip \- manage USB/IP devices
 .SH SYNOPSIS
 .B usbip
-[\foptions\R] <\fIcommand\fR> <\fIargs\fR>
+[\fIoptions\fR] <\fIcommand\fR> <\fIargs\fR>
 
 .SH DESCRIPTION
 On a USB/IP server, devices can be listed, bound, and unbound using
@@ -23,6 +23,12 @@
 Log to syslog.
 .PP
 
+.HP
+\fB\-\-tcp-port PORT\fR
+.IP
+Connect to PORT on remote host (used for attach and list --remote).
+.PP
+
 .SH COMMANDS
 .HP
 \fBversion\fR
diff --git a/drivers/staging/usbip/userspace/doc/usbipd.8 b/drivers/staging/usbip/userspace/doc/usbipd.8
index d896936..ac4635d 100644
--- a/drivers/staging/usbip/userspace/doc/usbipd.8
+++ b/drivers/staging/usbip/userspace/doc/usbipd.8
@@ -14,10 +14,22 @@
 before usbipd makes them available to other hosts.
 
 The daemon accepts connections from USB/IP clients
-on TCP port 3240.
+on TCP port 3240 by default.
 
 .SH OPTIONS
 .HP
+\fB\-4\fR, \fB\-\-ipv4\fR
+.IP
+Bind to IPv4. Default is both.
+.PP
+
+.HP
+\fB\-6\fR, \fB\-\-ipv6\fR
+.IP
+Bind to IPv6. Default is both.
+.PP
+
+.HP
 \fB\-D\fR, \fB\-\-daemon\fR
 .IP
 Run as a daemon process.
@@ -29,6 +41,19 @@
 Print debugging information.
 .PP
 
+.HP
+\fB\-PFILE\fR, \fB\-\-pid FILE\fR
+.IP
+Write process id to FILE.
+.br
+If no FILE specified, use /var/run/usbipd.pid
+.PP
+
+\fB\-tPORT\fR, \fB\-\-tcp\-port PORT\fR
+.IP
+Listen on TCP/IP port PORT.
+.PP
+
 \fB\-h\fR, \fB\-\-help\fR
 .IP
 Print the program help message and exit.
diff --git a/drivers/staging/usbip/userspace/src/usbip_network.c b/drivers/staging/usbip/userspace/src/usbip_network.c
index c39a07f..b4c37e7 100644
--- a/drivers/staging/usbip/userspace/src/usbip_network.c
+++ b/drivers/staging/usbip/userspace/src/usbip_network.c
@@ -25,6 +25,10 @@
 #include <netinet/tcp.h>
 #include <unistd.h>
 
+#ifdef HAVE_LIBWRAP
+#include <tcpd.h>
+#endif
+
 #include "usbip_common.h"
 #include "usbip_network.h"
 
@@ -239,6 +243,18 @@
 	return ret;
 }
 
+int usbip_net_set_v6only(int sockfd)
+{
+	const int val = 1;
+	int ret;
+
+	ret = setsockopt(sockfd, IPPROTO_IPV6, IPV6_V6ONLY, &val, sizeof(val));
+	if (ret < 0)
+		dbg("setsockopt: IPV6_V6ONLY");
+
+	return ret;
+}
+
 /*
  * IPv6 Ready
  */
diff --git a/drivers/staging/usbip/userspace/src/usbip_network.h b/drivers/staging/usbip/userspace/src/usbip_network.h
index 2d0e427..f19ae19 100644
--- a/drivers/staging/usbip/userspace/src/usbip_network.h
+++ b/drivers/staging/usbip/userspace/src/usbip_network.h
@@ -180,6 +180,7 @@
 int usbip_net_set_reuseaddr(int sockfd);
 int usbip_net_set_nodelay(int sockfd);
 int usbip_net_set_keepalive(int sockfd);
+int usbip_net_set_v6only(int sockfd);
 int usbip_net_tcp_connect(char *hostname, char *port);
 
 #endif /* __USBIP_NETWORK_H */
diff --git a/drivers/staging/usbip/userspace/src/usbipd.c b/drivers/staging/usbip/userspace/src/usbipd.c
index 1c76cfd..7980f8b 100644
--- a/drivers/staging/usbip/userspace/src/usbipd.c
+++ b/drivers/staging/usbip/userspace/src/usbipd.c
@@ -56,6 +56,13 @@
 
 static const char usbipd_help_string[] =
 	"usage: usbipd [options]\n"
+	"\n"
+	"	-4, --ipv4\n"
+	"		Bind to IPv4. Default is both.\n"
+	"\n"
+	"	-6, --ipv6\n"
+	"		Bind to IPv6. Default is both.\n"
+	"\n"
 	"	-D, --daemon\n"
 	"		Run as a daemon process.\n"
 	"\n"
@@ -354,14 +361,15 @@
 	snprintf(buf, buf_size, "%s:%s", hbuf, sbuf);
 }
 
-static int listen_all_addrinfo(struct addrinfo *ai_head, int sockfdlist[])
+static int listen_all_addrinfo(struct addrinfo *ai_head, int sockfdlist[],
+			     int maxsockfd)
 {
 	struct addrinfo *ai;
 	int ret, nsockfd = 0;
 	const size_t ai_buf_size = NI_MAXHOST + NI_MAXSERV + 2;
 	char ai_buf[ai_buf_size];
 
-	for (ai = ai_head; ai && nsockfd < MAXSOCKFD; ai = ai->ai_next) {
+	for (ai = ai_head; ai && nsockfd < maxsockfd; ai = ai->ai_next) {
 		int sock;
 		addrinfo_to_text(ai, ai_buf, ai_buf_size);
 		dbg("opening %s", ai_buf);
@@ -374,6 +382,9 @@
 
 		usbip_net_set_reuseaddr(sock);
 		usbip_net_set_nodelay(sock);
+		/* We use seperate sockets for IPv4 and IPv6
+		 * (see do_standalone_mode()) */
+		usbip_net_set_v6only(sock);
 
 		if (sock >= FD_SETSIZE) {
 			err("FD_SETSIZE: %s: sock=%d, max=%d",
@@ -402,11 +413,6 @@
 		sockfdlist[nsockfd++] = sock;
 	}
 
-	if (nsockfd == 0)
-		return -1;
-
-	dbg("listening on %d address%s", nsockfd, (nsockfd == 1) ? "" : "es");
-
 	return nsockfd;
 }
 
@@ -473,11 +479,11 @@
 	}
 }
 
-static int do_standalone_mode(int daemonize)
+static int do_standalone_mode(int daemonize, int ipv4, int ipv6)
 {
 	struct addrinfo *ai_head;
 	int sockfdlist[MAXSOCKFD];
-	int nsockfd;
+	int nsockfd, family;
 	int i, terminate;
 	struct pollfd *fds;
 	struct timespec timeout;
@@ -501,21 +507,36 @@
 	set_signal();
 	write_pid_file();
 
-	ai_head = do_getaddrinfo(NULL, PF_UNSPEC);
+	info("starting " PROGNAME " (%s)", usbip_version_string);
+
+	/*
+	 * To suppress warnings on systems with bindv6only disabled
+	 * (default), we use seperate sockets for IPv6 and IPv4 and set
+	 * IPV6_V6ONLY on the IPv6 sockets.
+	 */
+	if (ipv4 && ipv6)
+		family = AF_UNSPEC;
+	else if (ipv4)
+		family = AF_INET;
+	else
+		family = AF_INET6;
+
+	ai_head = do_getaddrinfo(NULL, family);
 	if (!ai_head) {
 		usbip_host_driver_close();
 		return -1;
 	}
-
-	info("starting " PROGNAME " (%s)", usbip_version_string);
-
-	nsockfd = listen_all_addrinfo(ai_head, sockfdlist);
+	nsockfd = listen_all_addrinfo(ai_head, sockfdlist,
+		sizeof(sockfdlist) / sizeof(*sockfdlist));
+	freeaddrinfo(ai_head);
 	if (nsockfd <= 0) {
 		err("failed to open a listening socket");
-		freeaddrinfo(ai_head);
 		usbip_host_driver_close();
 		return -1;
 	}
+
+	dbg("listening on %d address%s", nsockfd, (nsockfd == 1) ? "" : "es");
+
 	fds = calloc(nsockfd, sizeof(struct pollfd));
 	for (i = 0; i < nsockfd; i++) {
 		fds[i].fd = sockfdlist[i];
@@ -551,7 +572,6 @@
 
 	info("shutting down " PROGNAME);
 	free(fds);
-	freeaddrinfo(ai_head);
 	usbip_host_driver_close();
 
 	return 0;
@@ -560,6 +580,9 @@
 int main(int argc, char *argv[])
 {
 	static const struct option longopts[] = {
+		{ "ipv4",     no_argument,       NULL, '4' },
+		{ "ipv6",     no_argument,       NULL, '6' },
+		{ "daemon",   no_argument,       NULL, 'D' },
 		{ "daemon",   no_argument,       NULL, 'D' },
 		{ "debug",    no_argument,       NULL, 'd' },
 		{ "pid",      optional_argument, NULL, 'P' },
@@ -576,6 +599,7 @@
 	} cmd;
 
 	int daemonize = 0;
+	int ipv4 = 0, ipv6 = 0;
 	int opt, rc = -1;
 	pid_file = NULL;
 
@@ -587,12 +611,18 @@
 
 	cmd = cmd_standalone_mode;
 	for (;;) {
-		opt = getopt_long(argc, argv, "DdP::t:hv", longopts, NULL);
+		opt = getopt_long(argc, argv, "46DdP::t:hv", longopts, NULL);
 
 		if (opt == -1)
 			break;
 
 		switch (opt) {
+		case '4':
+			ipv4 = 1;
+			break;
+		case '6':
+			ipv6 = 1;
+			break;
 		case 'D':
 			daemonize = 1;
 			break;
@@ -618,9 +648,12 @@
 		}
 	}
 
+	if (!ipv4 && !ipv6)
+		ipv4 = ipv6 = 1;
+
 	switch (cmd) {
 	case cmd_standalone_mode:
-		rc = do_standalone_mode(daemonize);
+		rc = do_standalone_mode(daemonize, ipv4, ipv6);
 		remove_pid_file();
 		break;
 	case cmd_version:
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index d7974cb..e810ad5 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -999,12 +999,6 @@
 
 	usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
 
-	/* will be removed */
-	if (pdev->dev.dma_mask) {
-		dev_info(&pdev->dev, "vhci_hcd DMA not supported\n");
-		return -EINVAL;
-	}
-
 	/*
 	 * Allocate and initialize hcd.
 	 * Our private data is also allocated automatically.
@@ -1146,11 +1140,11 @@
 		return -ENODEV;
 
 	ret = platform_driver_register(&vhci_driver);
-	if (ret < 0)
+	if (ret)
 		goto err_driver_register;
 
 	ret = platform_device_register(&the_pdev);
-	if (ret < 0)
+	if (ret)
 		goto err_platform_device_register;
 
 	pr_info(DRIVER_DESC " v" USBIP_VERSION "\n");
diff --git a/drivers/staging/vt6655/80211mgr.c b/drivers/staging/vt6655/80211mgr.c
index 76c8490..7949d58 100644
--- a/drivers/staging/vt6655/80211mgr.c
+++ b/drivers/staging/vt6655/80211mgr.c
@@ -165,9 +165,8 @@
 			break;
 
 		case WLAN_EID_RSN:
-			if (pFrame->pRSN == NULL) {
+			if (pFrame->pRSN == NULL)
 				pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-			}
 			break;
 		case WLAN_EID_RSN_WPA:
 			if (pFrame->pRSNWPA == NULL) {
@@ -382,9 +381,8 @@
 			break;
 
 		case WLAN_EID_RSN:
-			if (pFrame->pRSN == NULL) {
+			if (pFrame->pRSN == NULL)
 				pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-			}
 			break;
 		case WLAN_EID_RSN_WPA:
 			if (pFrame->pRSNWPA == NULL) {
@@ -556,9 +554,8 @@
 			break;
 
 		case WLAN_EID_RSN:
-			if (pFrame->pRSN == NULL) {
+			if (pFrame->pRSN == NULL)
 				pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-			}
 			break;
 		case WLAN_EID_RSN_WPA:
 			if (pFrame->pRSNWPA == NULL) {
@@ -742,9 +739,8 @@
 			break;
 
 		case WLAN_EID_RSN:
-			if (pFrame->pRSN == NULL) {
+			if (pFrame->pRSN == NULL)
 				pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-			}
 			break;
 		case WLAN_EID_RSN_WPA:
 			if (pFrame->pRSNWPA == NULL) {
@@ -858,9 +854,9 @@
 	pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
 			   + WLAN_AUTHEN_OFF_CHALLENGE);
 
-	if ((((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_CHALLENGE)) {
+	if (((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len) &&
+	    pItem->byElementID == WLAN_EID_CHALLENGE)
 		pFrame->pChallenge = (PWLAN_IE_CHALLENGE)pItem;
-	}
 
 	return;
 }
diff --git a/drivers/staging/vt6655/aes_ccmp.c b/drivers/staging/vt6655/aes_ccmp.c
index fc056fc..82b0bd1 100644
--- a/drivers/staging/vt6655/aes_ccmp.c
+++ b/drivers/staging/vt6655/aes_ccmp.c
@@ -46,7 +46,7 @@
  * SBOX Table
  */
 
-unsigned char sbox_table[256] =
+static unsigned char sbox_table[256] =
 {
 	0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
 	0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
@@ -66,7 +66,7 @@
 	0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
 };
 
-unsigned char dot2_table[256] = {
+static unsigned char dot2_table[256] = {
 	0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
 	0x20, 0x22, 0x24, 0x26, 0x28, 0x2a, 0x2c, 0x2e, 0x30, 0x32, 0x34, 0x36, 0x38, 0x3a, 0x3c, 0x3e,
 	0x40, 0x42, 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x4e, 0x50, 0x52, 0x54, 0x56, 0x58, 0x5a, 0x5c, 0x5e,
@@ -85,7 +85,7 @@
 	0xfb, 0xf9, 0xff, 0xfd, 0xf3, 0xf1, 0xf7, 0xf5, 0xeb, 0xe9, 0xef, 0xed, 0xe3, 0xe1, 0xe7, 0xe5
 };
 
-unsigned char dot3_table[256] = {
+static unsigned char dot3_table[256] = {
 	0x00, 0x03, 0x06, 0x05, 0x0c, 0x0f, 0x0a, 0x09, 0x18, 0x1b, 0x1e, 0x1d, 0x14, 0x17, 0x12, 0x11,
 	0x30, 0x33, 0x36, 0x35, 0x3c, 0x3f, 0x3a, 0x39, 0x28, 0x2b, 0x2e, 0x2d, 0x24, 0x27, 0x22, 0x21,
 	0x60, 0x63, 0x66, 0x65, 0x6c, 0x6f, 0x6a, 0x69, 0x78, 0x7b, 0x7e, 0x7d, 0x74, 0x77, 0x72, 0x71,
@@ -110,7 +110,7 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-void xor_128(unsigned char *a, unsigned char *b, unsigned char *out)
+static void xor_128(unsigned char *a, unsigned char *b, unsigned char *out)
 {
 	unsigned long *dwPtrA = (unsigned long *)a;
 	unsigned long *dwPtrB = (unsigned long *)b;
@@ -122,7 +122,7 @@
 	(*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
 }
 
-void xor_32(unsigned char *a, unsigned char *b, unsigned char *out)
+static void xor_32(unsigned char *a, unsigned char *b, unsigned char *out)
 {
 	unsigned long *dwPtrA = (unsigned long *)a;
 	unsigned long *dwPtrB = (unsigned long *)b;
@@ -131,7 +131,7 @@
 	(*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
 }
 
-void AddRoundKey(unsigned char *key, int round)
+static void AddRoundKey(unsigned char *key, int round)
 {
 	unsigned char sbox_key[4];
 	unsigned char rcon_table[10] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36};
@@ -149,7 +149,7 @@
 	xor_32(&key[12], &key[8], &key[12]);
 }
 
-void SubBytes(unsigned char *in, unsigned char *out)
+static void SubBytes(unsigned char *in, unsigned char *out)
 {
 	int i;
 
@@ -158,7 +158,7 @@
 	}
 }
 
-void ShiftRows(unsigned char *in, unsigned char *out)
+static void ShiftRows(unsigned char *in, unsigned char *out)
 {
 	out[0]  = in[0];
 	out[1]  = in[5];
@@ -178,7 +178,7 @@
 	out[15] = in[11];
 }
 
-void MixColumns(unsigned char *in, unsigned char *out)
+static void MixColumns(unsigned char *in, unsigned char *out)
 {
 	out[0] = dot2_table[in[0]] ^ dot3_table[in[1]] ^ in[2] ^ in[3];
 	out[1] = in[0] ^ dot2_table[in[1]] ^ dot3_table[in[2]] ^ in[3];
@@ -186,7 +186,7 @@
 	out[3] = dot3_table[in[0]] ^ in[1] ^ in[2] ^ dot2_table[in[3]];
 }
 
-void AESv128(unsigned char *key, unsigned char *data, unsigned char *ciphertext)
+static void AESv128(unsigned char *key, unsigned char *data, unsigned char *ciphertext)
 {
 	int  i;
 	int  round;
diff --git a/drivers/staging/vt6655/baseband.c b/drivers/staging/vt6655/baseband.c
index c26418d..959568a 100644
--- a/drivers/staging/vt6655/baseband.c
+++ b/drivers/staging/vt6655/baseband.c
@@ -2434,13 +2434,12 @@
 
 	BBbReadEmbedded(pDevice->PortOffset, 0x0A, &byBBRxConf);//CR10
 	// patch for 3253B0 Baseband with Cardbus module
-	if (byData == pDevice->abyBBVGA[0]) {
+	if (byData == pDevice->abyBBVGA[0])
 		byBBRxConf |= 0x20;//0010 0000
-	} else if (pDevice->bShortSlotTime) {
+	else if (pDevice->bShortSlotTime)
 		byBBRxConf &= 0xDF;//1101 1111
-	} else {
+	else
 		byBBRxConf |= 0x20;//0010 0000
-	}
 	pDevice->byBBVGACurrent = byData;
 	BBbWriteEmbedded(pDevice->PortOffset, 0x0A, byBBRxConf);//CR10
 }
diff --git a/drivers/staging/vt6655/bssdb.c b/drivers/staging/vt6655/bssdb.c
index f983915..a23b591 100644
--- a/drivers/staging/vt6655/bssdb.c
+++ b/drivers/staging/vt6655/bssdb.c
@@ -148,7 +148,8 @@
 			if (pDevice->bLinkPass == false) pCurrBSS->bSelected = false;
 			if ((pCurrBSS->bActive) &&
 			    (pCurrBSS->bSelected == false)) {
-				if (!compare_ether_addr(pCurrBSS->abyBSSID, pbyBSSID)) {
+				if (ether_addr_equal(pCurrBSS->abyBSSID,
+						     pbyBSSID)) {
 					if (pSSID != NULL) {
 						// compare ssid
 						if (!memcmp(pSSID->abySSID,
@@ -275,7 +276,8 @@
 	for (ii = 0; ii < MAX_BSS_NUM; ii++) {
 		if (bKeepCurrBSSID) {
 			if (pMgmt->sBSSList[ii].bActive &&
-			    !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID, pMgmt->abyCurrBSSID)) {
+			    ether_addr_equal(pMgmt->sBSSList[ii].abyBSSID,
+					     pMgmt->abyCurrBSSID)) {
 				// bKeepCurrBSSID = false;
 				continue;
 			}
@@ -318,7 +320,7 @@
 	for (ii = 0; ii < MAX_BSS_NUM; ii++) {
 		pBSSList = &(pMgmt->sBSSList[ii]);
 		if (pBSSList->bActive) {
-			if (!compare_ether_addr(pBSSList->abyBSSID, abyBSSID)) {
+			if (ether_addr_equal(pBSSList->abyBSSID, abyBSSID)) {
 				if (pSSID->len == ((PWLAN_IE_SSID)pBSSList->abySSID)->len) {
 					if (memcmp(pSSID->abySSID,
 						   ((PWLAN_IE_SSID)pBSSList->abySSID)->abySSID,
@@ -733,7 +735,8 @@
 	// Index = 0 reserved for AP Node
 	for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
 		if (pMgmt->sNodeDBTable[ii].bActive) {
-			if (!compare_ether_addr(abyDstAddr, pMgmt->sNodeDBTable[ii].abyMACAddr)) {
+			if (ether_addr_equal(abyDstAddr,
+					     pMgmt->sNodeDBTable[ii].abyMACAddr)) {
 				*puNodeIndex = ii;
 				return true;
 			}
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index 7f36a71..e93fdc8 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1153,10 +1153,6 @@
 		pci_release_regions(pDevice->pcid);
 	if (dev)
 		free_netdev(dev);
-
-	if (pDevice->pcid) {
-		pci_set_drvdata(pDevice->pcid, NULL);
-	}
 }
 
 static bool device_init_rings(PSDevice pDevice) {
diff --git a/drivers/staging/vt6655/dpc.c b/drivers/staging/vt6655/dpc.c
index a9533f3..0ff51cb 100644
--- a/drivers/staging/vt6655/dpc.c
+++ b/drivers/staging/vt6655/dpc.c
@@ -172,9 +172,9 @@
 	};
 
 	pbyRxBuffer = (unsigned char *)(pbyRxBufferAddr + cbHeaderSize);
-	if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_Bridgetunnel[0])) {
+	if (ether_addr_equal(pbyRxBuffer, pDevice->abySNAP_Bridgetunnel)) {
 		cbHeaderSize += 6;
-	} else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
+	} else if (ether_addr_equal(pbyRxBuffer, pDevice->abySNAP_RFC1042)) {
 		cbHeaderSize += 6;
 		pwType = (unsigned short *)(pbyRxBufferAddr + cbHeaderSize);
 		if ((*pwType != TYPE_PKT_IPX) && (*pwType != cpu_to_le16(0xF380))) {
@@ -420,7 +420,8 @@
 	s_vGetDASA(skb->data+4, &cbHeaderSize, &pDevice->sRxEthHeader);
 
 	// filter packet send from myself
-	if (!compare_ether_addr((unsigned char *)&(pDevice->sRxEthHeader.abySrcAddr[0]), pDevice->abyCurrentNetAddr))
+	if (ether_addr_equal(pDevice->sRxEthHeader.abySrcAddr,
+			     pDevice->abyCurrentNetAddr))
 		return false;
 
 	if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) || (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)) {
diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c
index 8acff44..aab0012 100644
--- a/drivers/staging/vt6655/hostap.c
+++ b/drivers/staging/vt6655/hostap.c
@@ -720,7 +720,6 @@
  * Return Value:
  *
  */
-
 int vt6655_hostap_ioctl(PSDevice pDevice, struct iw_point *p)
 {
 	struct viawget_hostapd_param *param;
@@ -731,7 +730,7 @@
 	    p->length > VIAWGET_HOSTAPD_MAX_BUF_SIZE || !p->pointer)
 		return -EINVAL;
 
-	param = kmalloc((int)p->length, (int)GFP_KERNEL);
+	param = kmalloc((int)p->length, GFP_KERNEL);
 	if (param == NULL)
 		return -ENOMEM;
 
@@ -755,8 +754,8 @@
 		break;
 	case VIAWGET_HOSTAPD_SET_ASSOC_AP_ADDR:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SET_ASSOC_AP_ADDR \n");
-		return -EOPNOTSUPP;
-		break;
+		ret = -EOPNOTSUPP;
+		goto out;
 	case VIAWGET_HOSTAPD_FLUSH:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_FLUSH \n");
 		spin_lock_irq(&pDevice->lock);
@@ -790,40 +789,36 @@
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SET_FLAGS_STA \n");
 		ret = hostap_set_flags_sta(pDevice, param);
 		break;
-
 	case VIAWGET_HOSTAPD_MLME:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_MLME \n");
-		return -EOPNOTSUPP;
-
+		ret = -EOPNOTSUPP;
+		goto out;
 	case VIAWGET_HOSTAPD_SET_GENERIC_ELEMENT:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SET_GENERIC_ELEMENT \n");
 		ret = hostap_set_generic_element(pDevice, param);
 		break;
-
 	case VIAWGET_HOSTAPD_SCAN_REQ:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SCAN_REQ \n");
-		return -EOPNOTSUPP;
-
+		ret = -EOPNOTSUPP;
+		goto out;
 	case VIAWGET_HOSTAPD_STA_CLEAR_STATS:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_STA_CLEAR_STATS \n");
-		return -EOPNOTSUPP;
-
+		ret = -EOPNOTSUPP;
+		goto out;
 	default:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "vt6655_hostap_ioctl: unknown cmd=%d\n",
 			(int)param->cmd);
-		return -EOPNOTSUPP;
-		break;
+		ret = -EOPNOTSUPP;
+		goto out;
 	}
 
 	if ((ret == 0) && ap_ioctl) {
 		if (copy_to_user(p->pointer, param, p->length)) {
 			ret = -EFAULT;
-			goto out;
 		}
 	}
 
 out:
 	kfree(param);
-
 	return ret;
 }
diff --git a/drivers/staging/vt6655/iwctl.c b/drivers/staging/vt6655/iwctl.c
index 9de698e..4bff8aa 100644
--- a/drivers/staging/vt6655/iwctl.c
+++ b/drivers/staging/vt6655/iwctl.c
@@ -663,7 +663,8 @@
 			unsigned int ii, uSameBssidNum = 0;
 			for (ii = 0; ii < MAX_BSS_NUM; ii++) {
 				if (pMgmt->sBSSList[ii].bActive &&
-				    !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID, pMgmt->abyDesireBSSID)) {
+				    ether_addr_equal(pMgmt->sBSSList[ii].abyBSSID,
+						     pMgmt->abyDesireBSSID)) {
 					uSameBssidNum++;
 				}
 			}
@@ -840,7 +841,8 @@
 					//         by means of judging if there are two same BSSID exist in list ?
 					for (ii = 0; ii < MAX_BSS_NUM; ii++) {
 						if (pMgmt->sBSSList[ii].bActive &&
-						    !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
+						    ether_addr_equal(pMgmt->sBSSList[ii].abyBSSID,
+								     pCurr->abyBSSID)) {
 							uSameBssidNum++;
 						}
 					}
diff --git a/drivers/staging/vt6655/key.c b/drivers/staging/vt6655/key.c
index 92b84b5..04c1304 100644
--- a/drivers/staging/vt6655/key.c
+++ b/drivers/staging/vt6655/key.c
@@ -141,7 +141,7 @@
 	*pKey = NULL;
 	for (i = 0; i < MAX_KEY_TABLE; i++) {
 		if ((pTable->KeyTable[i].bInUse == true) &&
-		    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+		    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 			if (dwKeyIndex == 0xFFFFFFFF) {
 				if (pTable->KeyTable[i].PairwiseKey.bKeyValid == true) {
 					*pKey = &(pTable->KeyTable[i].PairwiseKey);
@@ -208,7 +208,7 @@
 			j = i;
 		}
 		if ((pTable->KeyTable[i].bInUse == true) &&
-		    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+		    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 			// found table already exist
 			if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
 				// Pairwise key
@@ -385,7 +385,7 @@
 
 	for (i = 0; i < MAX_KEY_TABLE; i++) {
 		if ((pTable->KeyTable[i].bInUse == true) &&
-		    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+		    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 			if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
 				pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
 				s_vCheckKeyTableValid(pTable, dwIoBase);
@@ -429,7 +429,7 @@
 
 	for (i = 0; i < MAX_KEY_TABLE; i++) {
 		if ((pTable->KeyTable[i].bInUse == true) &&
-		    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+		    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 			pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
 			for (u = 0; u < MAX_GROUP_KEY; u++) {
 				pTable->KeyTable[i].GroupKey[u].bKeyValid = false;
@@ -512,7 +512,7 @@
 	*pKey = NULL;
 	for (i = 0; i < MAX_KEY_TABLE; i++) {
 		if ((pTable->KeyTable[i].bInUse == true) &&
-		    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+		    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 			if (dwKeyType == PAIRWISE_KEY) {
 				if (pTable->KeyTable[i].PairwiseKey.bKeyValid == true) {
 					*pKey = &(pTable->KeyTable[i].PairwiseKey);
diff --git a/drivers/staging/vt6655/michael.h b/drivers/staging/vt6655/michael.h
index 0828d18..387d206 100644
--- a/drivers/staging/vt6655/michael.h
+++ b/drivers/staging/vt6655/michael.h
@@ -39,18 +39,18 @@
 
 void MIC_vUnInit(void);
 
-// Append bytes to the message to be MICed
+/* Append bytes to the message to be MICed */
 void MIC_vAppend(unsigned char *src, unsigned int nBytes);
 
-// Get the MIC result. Destination should accept 8 bytes of result.
-// This also resets the message to empty.
+/* Get the MIC result. Destination should accept 8 bytes of result. */
+/* This also resets the message to empty. */
 void MIC_vGetMIC(unsigned long *pdwL, unsigned long *pdwR);
 
 /*---------------------  Export Macros ------------------------------*/
 
-// Rotation functions on 32 bit values
+/* Rotation functions on 32 bit values */
 #define ROL32(A, n)							\
 	(((A) << (n)) | (((A)>>(32-(n)))  & ((1UL << (n)) - 1)))
 #define ROR32(A, n) ROL32((A), 32-(n))
 
-#endif //__MICHAEL_H__
+#endif /*__MICHAEL_H__ */
diff --git a/drivers/staging/vt6655/rf.c b/drivers/staging/vt6655/rf.c
index 6948984..ce173cc 100644
--- a/drivers/staging/vt6655/rf.c
+++ b/drivers/staging/vt6655/rf.c
@@ -55,7 +55,7 @@
 
 /*---------------------  Static Variables  --------------------------*/
 
-const unsigned long dwAL2230InitTable[CB_AL2230_INIT_SEQ] = {
+static const unsigned long dwAL2230InitTable[CB_AL2230_INIT_SEQ] = {
 	0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
 	0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
 	0x01A00200+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
@@ -73,7 +73,7 @@
 	0x00580F00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW
 };
 
-const unsigned long dwAL2230ChannelTable0[CB_MAX_CHANNEL] = {
+static const unsigned long dwAL2230ChannelTable0[CB_MAX_CHANNEL] = {
 	0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 1, Tf = 2412MHz
 	0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 2, Tf = 2417MHz
 	0x03E79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 3, Tf = 2422MHz
@@ -90,7 +90,7 @@
 	0x03E7C000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 14, Tf = 2412M
 };
 
-const unsigned long dwAL2230ChannelTable1[CB_MAX_CHANNEL] = {
+static const unsigned long dwAL2230ChannelTable1[CB_MAX_CHANNEL] = {
 	0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 1, Tf = 2412MHz
 	0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 2, Tf = 2417MHz
 	0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 3, Tf = 2422MHz
@@ -107,7 +107,7 @@
 	0x06666100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 14, Tf = 2412M
 };
 
-unsigned long dwAL2230PowerTable[AL2230_PWR_IDX_LEN] = {
+static unsigned long dwAL2230PowerTable[AL2230_PWR_IDX_LEN] = {
 	0x04040900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
 	0x04041900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
 	0x04042900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
@@ -177,7 +177,7 @@
 //{{ RobertYu:20050104
 // 40MHz reference frequency
 // Need to Pull PLLON(PE3) low when writing channel registers through 3-wire.
-const unsigned long dwAL7230InitTable[CB_AL7230_INIT_SEQ] = {
+static const unsigned long dwAL7230InitTable[CB_AL7230_INIT_SEQ] = {
 	0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel1 // Need modify for 11a
 	0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel1 // Need modify for 11a
 	0x841FF200+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 451FE2
@@ -200,7 +200,7 @@
 	0x1ABA8F00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // Need modify for 11a: 12BACF
 };
 
-const unsigned long dwAL7230InitTableAMode[CB_AL7230_INIT_SEQ] = {
+static const unsigned long dwAL7230InitTableAMode[CB_AL7230_INIT_SEQ] = {
 	0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel184 // Need modify for 11b/g
 	0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel184 // Need modify for 11b/g
 	0x451FE200+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g
@@ -219,7 +219,7 @@
 	0x12BACF00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // Need modify for 11b/g
 };
 
-const unsigned long dwAL7230ChannelTable0[CB_MAX_CHANNEL] = {
+static const unsigned long dwAL7230ChannelTable0[CB_MAX_CHANNEL] = {
 	0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
 	0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
 	0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
@@ -285,7 +285,7 @@
 	0x0FF61000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 165, Tf = 5825MHz (56)
 };
 
-const unsigned long dwAL7230ChannelTable1[CB_MAX_CHANNEL] = {
+static const unsigned long dwAL7230ChannelTable1[CB_MAX_CHANNEL] = {
 	0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
 	0x1B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
 	0x03333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
@@ -349,7 +349,7 @@
 	0x02AAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 165, Tf = 5825MHz (56)
 };
 
-const unsigned long dwAL7230ChannelTable2[CB_MAX_CHANNEL] = {
+static const unsigned long dwAL7230ChannelTable2[CB_MAX_CHANNEL] = {
 	0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
 	0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
 	0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
@@ -428,7 +428,7 @@
  * Return Value: true if succeeded; false if failed.
  *
  */
-bool s_bAL7230Init(unsigned long dwIoBase)
+static bool s_bAL7230Init(unsigned long dwIoBase)
 {
 	int     ii;
 	bool bResult;
@@ -471,7 +471,7 @@
 }
 
 // Need to Pull PLLON low when writing channel registers through 3-wire interface
-bool s_bAL7230SelectChannel(unsigned long dwIoBase, unsigned char byChannel)
+static bool s_bAL7230SelectChannel(unsigned long dwIoBase, unsigned char byChannel)
 {
 	bool bResult;
 
@@ -631,7 +631,7 @@
  * Return Value: true if succeeded; false if failed.
  *
  */
-bool RFbAL2230Init(unsigned long dwIoBase)
+static bool RFbAL2230Init(unsigned long dwIoBase)
 {
 	int     ii;
 	bool bResult;
@@ -678,7 +678,7 @@
 	return bResult;
 }
 
-bool RFbAL2230SelectChannel(unsigned long dwIoBase, unsigned char byChannel)
+static bool RFbAL2230SelectChannel(unsigned long dwIoBase, unsigned char byChannel)
 {
 	bool bResult;
 
@@ -776,36 +776,6 @@
 }
 
 /*
- * Description: RF ShutDown function
- *
- * Parameters:
- *  In:
- *      byBBType
- *      byRFType
- *  Out:
- *      none
- *
- * Return Value: true if succeeded; false if failed.
- *
- */
-bool RFbShutDown(
-	PSDevice  pDevice
-)
-{
-	bool bResult = true;
-
-	switch (pDevice->byRFType) {
-	case RF_AIROHA7230:
-		bResult = IFRFbWriteEmbedded(pDevice->PortOffset, 0x1ABAEF00 + (BY_AL7230_REG_LEN << 3) + IFREGCTL_REGW);
-		break;
-	default:
-		bResult = true;
-		break;
-	}
-	return bResult;
-}
-
-/*
  * Description: Select channel
  *
  * Parameters:
diff --git a/drivers/staging/vt6655/tkip.c b/drivers/staging/vt6655/tkip.c
index b3e087e..e7c17c6 100644
--- a/drivers/staging/vt6655/tkip.c
+++ b/drivers/staging/vt6655/tkip.c
@@ -55,7 +55,7 @@
 /* The 2nd table is the same as the 1st but with the upper and lower   */
 /* bytes swapped. To allow an endian tolerant implementation, the byte */
 /* halves have been expressed independently here.                      */
-const unsigned char TKIP_Sbox_Lower[256] = {
+static const unsigned char TKIP_Sbox_Lower[256] = {
 	0xA5, 0x84, 0x99, 0x8D, 0x0D, 0xBD, 0xB1, 0x54,
 	0x50, 0x03, 0xA9, 0x7D, 0x19, 0x62, 0xE6, 0x9A,
 	0x45, 0x9D, 0x40, 0x87, 0x15, 0xEB, 0xC9, 0x0B,
@@ -90,7 +90,7 @@
 	0xC3, 0xB0, 0x77, 0x11, 0xCB, 0xFC, 0xD6, 0x3A
 };
 
-const unsigned char TKIP_Sbox_Upper[256] = {
+static const unsigned char TKIP_Sbox_Upper[256] = {
 	0xC6, 0xF8, 0xEE, 0xF6, 0xFF, 0xD6, 0xDE, 0x91,
 	0x60, 0x02, 0xCE, 0x56, 0xE7, 0xB5, 0x4D, 0xEC,
 	0x8F, 0x1F, 0x89, 0xFA, 0xEF, 0xB2, 0x8E, 0xFB,
diff --git a/drivers/staging/vt6655/vntwifi.c b/drivers/staging/vt6655/vntwifi.c
index d8f4f8e..d2bdb71 100644
--- a/drivers/staging/vt6655/vntwifi.c
+++ b/drivers/staging/vt6655/vntwifi.c
@@ -752,25 +752,3 @@
 	//spin_unlock_irq(&pDevice->lock);
 	return true;
 }
-
-/*
-  bool
-  VNTWIFIbRadarPresent(
-  void *pMgmtObject,
-  unsigned char byChannel
-) {
-  PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
-  if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
-  (byChannel == (unsigned char) pMgmt->uCurrChannel) &&
-  (pMgmt->bSwitchChannel != true) &&
-  (pMgmt->b11hEnable == true)) {
-  if (!compare_ether_addr(pMgmt->abyIBSSDFSOwner, CARDpGetCurrentAddress(pMgmt->pAdapter))) {
-  pMgmt->byNewChannel = CARDbyAutoChannelSelect(pMgmt->pAdapter,(unsigned char) pMgmt->uCurrChannel);
-  pMgmt->bSwitchChannel = true;
-  }
-  BEACONbSendBeacon(pMgmt);
-  CARDbChannelSwitch(pMgmt->pAdapter, 0, pMgmt->byNewChannel, 10);
-  }
-  return true;
-  }
-*/
diff --git a/drivers/staging/vt6655/wcmd.c b/drivers/staging/vt6655/wcmd.c
index d551653..9c57eef 100644
--- a/drivers/staging/vt6655/wcmd.c
+++ b/drivers/staging/vt6655/wcmd.c
@@ -233,7 +233,7 @@
  *
  *
  * Return Value:
- *    A ptr to Tx frame or NULL on allocation failue
+ *    A ptr to Tx frame or NULL on allocation failure
  *
  -*/
 
diff --git a/drivers/staging/vt6655/wctl.c b/drivers/staging/vt6655/wctl.c
index 9eb81b4..f05f9f5 100644
--- a/drivers/staging/vt6655/wctl.c
+++ b/drivers/staging/vt6655/wctl.c
@@ -75,8 +75,8 @@
 		for (ii = 0; ii < DUPLICATE_RX_CACHE_LENGTH; ii++) {
 			pCacheEntry = &(pCache->asCacheEntry[uIndex]);
 			if ((pCacheEntry->wFmSequence == pMACHeader->wSeqCtl) &&
-			    (!compare_ether_addr(&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
-) {
+			    ether_addr_equal(pCacheEntry->abyAddr2,
+					     pMACHeader->abyAddr2)) {
 				/* Duplicate match */
 				return true;
 			}
@@ -111,8 +111,8 @@
 
 	for (ii = 0; ii < pDevice->cbDFCB; ii++) {
 		if ((pDevice->sRxDFCB[ii].bInUse == true) &&
-		    (!compare_ether_addr(&(pDevice->sRxDFCB[ii].abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
-) {
+		    ether_addr_equal(pDevice->sRxDFCB[ii].abyAddr2,
+				     pMACHeader->abyAddr2)) {
 			//
 			return ii;
 		}
diff --git a/drivers/staging/vt6655/wmgr.c b/drivers/staging/vt6655/wmgr.c
index 9938813..ed4b32b 100644
--- a/drivers/staging/vt6655/wmgr.c
+++ b/drivers/staging/vt6655/wmgr.c
@@ -1680,7 +1680,8 @@
 			vMgrDecodeDeauthen(&sFrame);
 			DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO  "AP deauthed me, reason=%d.\n", cpu_to_le16((*(sFrame.pwReason))));
 			// TODO: update BSS list for specific BSSID if pre-authentication case
-			if (!compare_ether_addr(sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID)) {
+			if (ether_addr_equal(sFrame.pHdr->sA3.abyAddr3,
+					     pMgmt->abyCurrBSSID)) {
 				if (pMgmt->eCurrState >= WMAC_STATE_AUTHPENDING) {
 					pMgmt->sNodeDBTable[0].bActive = false;
 					pMgmt->eCurrMode = WMAC_MODE_STANDBY;
diff --git a/drivers/staging/vt6655/wpa.c b/drivers/staging/vt6655/wpa.c
index c5293bb..b697fa6 100644
--- a/drivers/staging/vt6655/wpa.c
+++ b/drivers/staging/vt6655/wpa.c
@@ -45,12 +45,12 @@
 /*---------------------  Static Variables  --------------------------*/
 static int msglevel = MSG_LEVEL_INFO;
 
-const unsigned char abyOUI00[4] = { 0x00, 0x50, 0xf2, 0x00 };
-const unsigned char abyOUI01[4] = { 0x00, 0x50, 0xf2, 0x01 };
-const unsigned char abyOUI02[4] = { 0x00, 0x50, 0xf2, 0x02 };
-const unsigned char abyOUI03[4] = { 0x00, 0x50, 0xf2, 0x03 };
-const unsigned char abyOUI04[4] = { 0x00, 0x50, 0xf2, 0x04 };
-const unsigned char abyOUI05[4] = { 0x00, 0x50, 0xf2, 0x05 };
+static const unsigned char abyOUI00[4] = { 0x00, 0x50, 0xf2, 0x00 };
+static const unsigned char abyOUI01[4] = { 0x00, 0x50, 0xf2, 0x01 };
+static const unsigned char abyOUI02[4] = { 0x00, 0x50, 0xf2, 0x02 };
+static const unsigned char abyOUI03[4] = { 0x00, 0x50, 0xf2, 0x03 };
+static const unsigned char abyOUI04[4] = { 0x00, 0x50, 0xf2, 0x04 };
+static const unsigned char abyOUI05[4] = { 0x00, 0x50, 0xf2, 0x05 };
 
 /*+
  *
diff --git a/drivers/staging/vt6655/wpactl.c b/drivers/staging/vt6655/wpactl.c
index e8d9ecd..044368a 100644
--- a/drivers/staging/vt6655/wpactl.c
+++ b/drivers/staging/vt6655/wpactl.c
@@ -394,7 +394,7 @@
 
 		} else {
 			// Key Table Full
-			if (!compare_ether_addr(&param->addr[0], pDevice->abyBSSID)) {
+			if (ether_addr_equal(param->addr, pDevice->abyBSSID)) {
 				//DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA -Key Table Full.2\n"));
 				//spin_unlock_irq(&pDevice->lock);
 				return -EINVAL;
diff --git a/drivers/staging/vt6655/wroute.c b/drivers/staging/vt6655/wroute.c
index b61328f..85302c5 100644
--- a/drivers/staging/vt6655/wroute.c
+++ b/drivers/staging/vt6655/wroute.c
@@ -179,7 +179,7 @@
 		pHeadTD = pHeadTD->next;
 	}
 
-	pLastTD->pTDInfo->skb = 0;
+	pLastTD->pTDInfo->skb = NULL;
 	pLastTD->pTDInfo->byFlags = 0;
 
 	pDevice->apCurrTD[TYPE_AC0DMA] = pHeadTD;
diff --git a/drivers/staging/vt6655/wroute.h b/drivers/staging/vt6655/wroute.h
index 5ecc190..3abc1d3 100644
--- a/drivers/staging/vt6655/wroute.h
+++ b/drivers/staging/vt6655/wroute.h
@@ -41,4 +41,4 @@
 
 bool ROUTEbRelay(PSDevice pDevice, unsigned char *pbySkbData, unsigned int uDataLen, unsigned int uNodeIndex);
 
-#endif // __WROUTE_H__
+#endif /* __WROUTE_H__ */
diff --git a/drivers/staging/vt6656/aes_ccmp.c b/drivers/staging/vt6656/aes_ccmp.c
index 28a4c4c..6c76939 100644
--- a/drivers/staging/vt6656/aes_ccmp.c
+++ b/drivers/staging/vt6656/aes_ccmp.c
@@ -96,9 +96,9 @@
 
 static void xor_128(u8 *a, u8 *b, u8 *out)
 {
-	u32 * dwPtrA = (u32 *) a;
-	u32 * dwPtrB = (u32 *) b;
-	u32 * dwPtrOut = (u32 *) out;
+	u32 *dwPtrA = (u32 *) a;
+	u32 *dwPtrB = (u32 *) b;
+	u32 *dwPtrOut = (u32 *) out;
 
 	(*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
 	(*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
@@ -108,9 +108,9 @@
 
 static void xor_32(u8 *a, u8 *b, u8 *out)
 {
-	u32 * dwPtrA = (u32 *) a;
-	u32 * dwPtrB = (u32 *) b;
-	u32 * dwPtrOut = (u32 *) out;
+	u32 *dwPtrA = (u32 *) a;
+	u32 *dwPtrB = (u32 *) b;
+	u32 *dwPtrOut = (u32 *) out;
 
 	(*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
 }
@@ -218,7 +218,7 @@
  *
  */
 
-bool AESbGenCCMP(u8 * pbyRxKey, u8 * pbyFrame, u16 wFrameSize)
+bool AESbGenCCMP(u8 *pbyRxKey, u8 *pbyFrame, u16 wFrameSize)
 {
 	u8            abyNonce[13];
 	u8            MIC_IV[16];
@@ -231,8 +231,8 @@
 	u8            abyLastCipher[16];
 
 	struct ieee80211_hdr *pMACHeader = (struct ieee80211_hdr *) pbyFrame;
-	u8 *           pbyIV;
-	u8 *           pbyPayload;
+	u8 *pbyIV;
+	u8 *pbyPayload;
 	u16            wHLen = 22;
 	/* 8 is IV, 8 is MIC, 4 is CRC */
 	u16            wPayloadSize = wFrameSize - 8 - 8 - 4 - WLAN_HDR_ADDR3_LEN;
diff --git a/drivers/staging/vt6656/bssdb.c b/drivers/staging/vt6656/bssdb.c
index ee79bbd..dad3f8c 100644
--- a/drivers/staging/vt6656/bssdb.c
+++ b/drivers/staging/vt6656/bssdb.c
@@ -57,6 +57,7 @@
 #include "control.h"
 #include "rndis.h"
 #include "iowpa.h"
+#include "power.h"
 
 static int          msglevel                =MSG_LEVEL_INFO;
 //static int          msglevel                =MSG_LEVEL_DEBUG;
@@ -126,7 +127,7 @@
 
             if ((pCurrBSS->bActive) &&
                 (pCurrBSS->bSelected == false)) {
-		    if (!compare_ether_addr(pCurrBSS->abyBSSID, pbyBSSID)) {
+		    if (ether_addr_equal(pCurrBSS->abyBSSID, pbyBSSID)) {
                     if (pSSID != NULL) {
                         // compare ssid
                         if ( !memcmp(pSSID->abySSID,
@@ -242,8 +243,8 @@
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
         if (bKeepCurrBSSID) {
             if (pMgmt->sBSSList[ii].bActive &&
-		!compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
-				    pMgmt->abyCurrBSSID)) {
+		ether_addr_equal(pMgmt->sBSSList[ii].abyBSSID,
+				 pMgmt->abyCurrBSSID)) {
  //mike mark: there are two BSSID's in list. If that AP is in hidden ssid mode, one SSID is null,
  //                 but other's might not be obvious, so if it associate's with your STA,
  //                 you must keep the two of them!!
@@ -277,7 +278,7 @@
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
         pBSSList = &(pMgmt->sBSSList[ii]);
         if (pBSSList->bActive) {
-		if (!compare_ether_addr(pBSSList->abyBSSID, abyBSSID)) {
+		if (ether_addr_equal(pBSSList->abyBSSID, abyBSSID)) {
                 if (pSSID->len == ((PWLAN_IE_SSID)pBSSList->abySSID)->len){
                     if (memcmp(pSSID->abySSID,
                             ((PWLAN_IE_SSID)pBSSList->abySSID)->abySSID,
@@ -623,8 +624,8 @@
     // Index = 0 reserved for AP Node
     for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
         if (pMgmt->sNodeDBTable[ii].bActive) {
-		if (!compare_ether_addr(abyDstAddr,
-					pMgmt->sNodeDBTable[ii].abyMACAddr)) {
+		if (ether_addr_equal(abyDstAddr,
+				     pMgmt->sNodeDBTable[ii].abyMACAddr)) {
                 *puNodeIndex = ii;
                 return true;
             }
@@ -813,8 +814,10 @@
  *
 -*/
 
-void BSSvSecondCallBack(struct vnt_private *pDevice)
+void BSSvSecondCallBack(struct work_struct *work)
 {
+	struct vnt_private *pDevice = container_of(work,
+			struct vnt_private, second_callback_work.work);
 	struct vnt_manager *pMgmt = &pDevice->vnt_mgmt;
 	int ii;
 	PWLAN_IE_SSID pItemSSID, pCurrSSID;
@@ -822,6 +825,9 @@
 	u32 uNonShortSlotSTACnt = 0;
 	u32 uLongPreambleSTACnt = 0;
 
+	if (pDevice->Flags & fMP_DISCONNECTED)
+		return;
+
     spin_lock_irq(&pDevice->lock);
 
     pDevice->uAssocCount = 0;
@@ -1119,15 +1125,26 @@
         }
     }
 
-    if (pDevice->bLinkPass == true) {
-        if (netif_queue_stopped(pDevice->dev))
-            netif_wake_queue(pDevice->dev);
-    }
+	if (pDevice->bLinkPass == true) {
+		if (pMgmt->eAuthenMode < WMAC_AUTH_WPA ||
+			pDevice->fWPA_Authened == true) {
+			if (++pDevice->tx_data_time_out > 40) {
+				pDevice->tx_trigger = true;
+
+				PSbSendNullPacket(pDevice);
+
+				pDevice->tx_trigger = false;
+				pDevice->tx_data_time_out = 0;
+			}
+		}
+
+		if (netif_queue_stopped(pDevice->dev))
+			netif_wake_queue(pDevice->dev);
+	}
 
     spin_unlock_irq(&pDevice->lock);
 
-    pMgmt->sTimerSecondCallback.expires = RUN_AT(HZ);
-    add_timer(&pMgmt->sTimerSecondCallback);
+	schedule_delayed_work(&pDevice->second_callback_work, HZ);
 }
 
 /*+
diff --git a/drivers/staging/vt6656/bssdb.h b/drivers/staging/vt6656/bssdb.h
index bce3b46..fc41855 100644
--- a/drivers/staging/vt6656/bssdb.h
+++ b/drivers/staging/vt6656/bssdb.h
@@ -262,7 +262,7 @@
 void BSSvUpdateAPNode(struct vnt_private *, u16 *pwCapInfo,
 	PWLAN_IE_SUPP_RATES pItemRates, PWLAN_IE_SUPP_RATES pExtSuppRates);
 
-void BSSvSecondCallBack(struct vnt_private *);
+void BSSvSecondCallBack(struct work_struct *work);
 
 void BSSvUpdateNodeTxCounter(struct vnt_private *, PSStatCounter pStatistic,
 	u8 byTSR, u8 byPktNO);
diff --git a/drivers/staging/vt6656/channel.c b/drivers/staging/vt6656/channel.c
index 5158ff4..e430b35 100644
--- a/drivers/staging/vt6656/channel.c
+++ b/drivers/staging/vt6656/channel.c
@@ -403,7 +403,7 @@
 
 void CHvInitChannelTable(struct vnt_private *pDevice)
 {
-	int bMultiBand = false;
+	bool bMultiBand = false;
 	int ii;
 
     for (ii = 1; ii <= CB_MAX_CHANNEL; ii++)
diff --git a/drivers/staging/vt6656/datarate.c b/drivers/staging/vt6656/datarate.c
index 17fbc35..af9eab0 100644
--- a/drivers/staging/vt6656/datarate.c
+++ b/drivers/staging/vt6656/datarate.c
@@ -44,9 +44,9 @@
 #include "rf.h"
 
 /* static int msglevel = MSG_LEVEL_DEBUG; */
-static int          msglevel                =MSG_LEVEL_INFO;
-const u8 acbyIERate[MAX_RATE] =
-{0x02, 0x04, 0x0B, 0x16, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+static int msglevel = MSG_LEVEL_INFO;
+const u8 acbyIERate[MAX_RATE] = {0x02, 0x04, 0x0B, 0x16, 0x0C, 0x12, 0x18,
+	0x24, 0x30, 0x48, 0x60, 0x6C};
 
 #define AUTORATE_TXOK_CNT       0x0400
 #define AUTORATE_TXFAIL_CNT     0x0064
@@ -56,13 +56,13 @@
 
 void s_vResetCounter(PKnownNodeDB psNodeDBTable)
 {
-    u8            ii;
+	u8 ii;
 
-    /* clear statistics counter for auto_rate */
-    for (ii = 0; ii <= MAX_RATE; ii++) {
-        psNodeDBTable->uTxOk[ii] = 0;
-        psNodeDBTable->uTxFail[ii] = 0;
-    }
+	/* clear statistics counter for auto_rate */
+	for (ii = 0; ii <= MAX_RATE; ii++) {
+		psNodeDBTable->uTxOk[ii] = 0;
+		psNodeDBTable->uTxFail[ii] = 0;
+	}
 }
 
 /*+
@@ -97,21 +97,18 @@
  * Return Value: RateIdx
  *
 -*/
-u16
-RATEwGetRateIdx(
-     u8 byRate
-    )
+u16 RATEwGetRateIdx(u8 byRate)
 {
-    u16    ii;
+	u16 ii;
 
-    /* erase BasicRate flag */
-    byRate = byRate & 0x7F;
+	/* erase BasicRate flag */
+	byRate = byRate & 0x7F;
 
-    for (ii = 0; ii < MAX_RATE; ii ++) {
-        if (acbyIERate[ii] == byRate)
-            return ii;
-    }
-    return 0;
+	for (ii = 0; ii < MAX_RATE; ii++) {
+		if (acbyIERate[ii] == byRate)
+			return ii;
+	}
+	return 0;
 }
 
 /*+
@@ -139,7 +136,7 @@
 	int bUpdateBasicRate, u16 *pwMaxBasicRate, u16 *pwMaxSuppRate,
 	u16 *pwSuppRate, u8 *pbyTopCCKRate, u8 *pbyTopOFDMRate)
 {
-	int  ii;
+	int ii;
 	u8 byHighSuppRate = 0, byRate = 0;
 	u16 wOldBasicRate = pDevice->wBasicRate;
 	u32 uRateLen;
@@ -147,83 +144,88 @@
 	if (pItemRates == NULL)
 		return;
 
-    *pwSuppRate = 0;
-    uRateLen = pItemRates->len;
+	*pwSuppRate = 0;
+	uRateLen = pItemRates->len;
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate Len: %d\n", uRateLen);
-    if (pDevice->byBBType != BB_TYPE_11B) {
-        if (uRateLen > WLAN_RATES_MAXLEN)
-            uRateLen = WLAN_RATES_MAXLEN;
-    } else {
-        if (uRateLen > WLAN_RATES_MAXLEN_11B)
-            uRateLen = WLAN_RATES_MAXLEN_11B;
-    }
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate Len: %d\n", uRateLen);
+	if (pDevice->byBBType != BB_TYPE_11B) {
+		if (uRateLen > WLAN_RATES_MAXLEN)
+			uRateLen = WLAN_RATES_MAXLEN;
+	} else {
+		if (uRateLen > WLAN_RATES_MAXLEN_11B)
+			uRateLen = WLAN_RATES_MAXLEN_11B;
+	}
 
-    for (ii = 0; ii < uRateLen; ii++) {
-    	byRate = (u8)(pItemRates->abyRates[ii]);
-        if (WLAN_MGMT_IS_BASICRATE(byRate) &&
-            (bUpdateBasicRate == true))  {
-	  /*
-	   * add to basic rate set, update pDevice->byTopCCKBasicRate and
-	   * pDevice->byTopOFDMBasicRate
-	   */
-		CARDbAddBasicRate((void *)pDevice, RATEwGetRateIdx(byRate));
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate AddBasicRate: %d\n", RATEwGetRateIdx(byRate));
-        }
-        byRate = (u8)(pItemRates->abyRates[ii]&0x7F);
-        if (byHighSuppRate == 0)
-            byHighSuppRate = byRate;
-        if (byRate > byHighSuppRate)
-            byHighSuppRate = byRate;
-        *pwSuppRate |= (1<<RATEwGetRateIdx(byRate));
-    }
-    if ((pItemExtRates != NULL) && (pItemExtRates->byElementID == WLAN_EID_EXTSUPP_RATES) &&
-        (pDevice->byBBType != BB_TYPE_11B)) {
+	for (ii = 0; ii < uRateLen; ii++) {
+		byRate = (u8)(pItemRates->abyRates[ii]);
+		if (WLAN_MGMT_IS_BASICRATE(byRate) &&
+				(bUpdateBasicRate == true)) {
+			/*
+			 * add to basic rate set, update pDevice->byTopCCKBasicRate and
+			 * pDevice->byTopOFDMBasicRate
+			 */
+			CARDbAddBasicRate((void *)pDevice, RATEwGetRateIdx(byRate));
+			DBG_PRT(MSG_LEVEL_DEBUG,
+				KERN_INFO"ParseMaxRate AddBasicRate: %d\n",
+				RATEwGetRateIdx(byRate));
+		}
+		byRate = (u8)(pItemRates->abyRates[ii]&0x7F);
+		if (byHighSuppRate == 0)
+			byHighSuppRate = byRate;
+		if (byRate > byHighSuppRate)
+			byHighSuppRate = byRate;
+		*pwSuppRate |= (1<<RATEwGetRateIdx(byRate));
+	}
+	if ((pItemExtRates != NULL) && (pItemExtRates->byElementID == WLAN_EID_EXTSUPP_RATES) &&
+			(pDevice->byBBType != BB_TYPE_11B)) {
 
-	unsigned int uExtRateLen = pItemExtRates->len;
+		unsigned int uExtRateLen = pItemExtRates->len;
 
-        if (uExtRateLen > WLAN_RATES_MAXLEN)
-            uExtRateLen = WLAN_RATES_MAXLEN;
+		if (uExtRateLen > WLAN_RATES_MAXLEN)
+			uExtRateLen = WLAN_RATES_MAXLEN;
 
-        for (ii = 0; ii < uExtRateLen ; ii++) {
-            byRate = (u8)(pItemExtRates->abyRates[ii]);
-	    /* select highest basic rate */
-            if (WLAN_MGMT_IS_BASICRATE(pItemExtRates->abyRates[ii])) {
-	      /*
-	       * add to basic rate set, update pDevice->byTopCCKBasicRate and
-	       * pDevice->byTopOFDMBasicRate
-	       */
-		    CARDbAddBasicRate((void *)pDevice, RATEwGetRateIdx(byRate));
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate AddBasicRate: %d\n", RATEwGetRateIdx(byRate));
-            }
-            byRate = (u8)(pItemExtRates->abyRates[ii]&0x7F);
-            if (byHighSuppRate == 0)
-                byHighSuppRate = byRate;
-            if (byRate > byHighSuppRate)
-                byHighSuppRate = byRate;
-            *pwSuppRate |= (1<<RATEwGetRateIdx(byRate));
+		for (ii = 0; ii < uExtRateLen; ii++) {
+			byRate = (u8)(pItemExtRates->abyRates[ii]);
+			/* select highest basic rate */
+			if (WLAN_MGMT_IS_BASICRATE(pItemExtRates->abyRates[ii])) {
+				/*
+				 * add to basic rate set, update pDevice->byTopCCKBasicRate and
+				 * pDevice->byTopOFDMBasicRate
+				 */
+				CARDbAddBasicRate((void *)pDevice, RATEwGetRateIdx(byRate));
+				DBG_PRT(MSG_LEVEL_DEBUG,
+						KERN_INFO"ParseMaxRate AddBasicRate: %d\n",
+						RATEwGetRateIdx(byRate));
+			}
+			byRate = (u8)(pItemExtRates->abyRates[ii]&0x7F);
+			if (byHighSuppRate == 0)
+				byHighSuppRate = byRate;
+			if (byRate > byHighSuppRate)
+				byHighSuppRate = byRate;
+			*pwSuppRate |= (1<<RATEwGetRateIdx(byRate));
 
-	    /* DBG_PRN_GRP09(("ParseMaxRate : HighSuppRate: %d, %X\n",
-	       RATEwGetRateIdx(byRate), byRate)); */
-        }
-    }
+			/* DBG_PRN_GRP09(("ParseMaxRate : HighSuppRate: %d, %X\n",
+			 * RATEwGetRateIdx(byRate), byRate));
+			 */
+		}
+	}
 
-    if ((pDevice->byPacketType == PK_TYPE_11GB)
-	&& CARDbIsOFDMinBasicRate((void *)pDevice)) {
-        pDevice->byPacketType = PK_TYPE_11GA;
-    }
+	if ((pDevice->byPacketType == PK_TYPE_11GB)
+			&& CARDbIsOFDMinBasicRate((void *)pDevice)) {
+		pDevice->byPacketType = PK_TYPE_11GA;
+	}
 
-    *pbyTopCCKRate = pDevice->byTopCCKBasicRate;
-    *pbyTopOFDMRate = pDevice->byTopOFDMBasicRate;
-    *pwMaxSuppRate = RATEwGetRateIdx(byHighSuppRate);
-    if ((pDevice->byPacketType==PK_TYPE_11B) || (pDevice->byPacketType==PK_TYPE_11GB))
-       *pwMaxBasicRate = pDevice->byTopCCKBasicRate;
-    else
-       *pwMaxBasicRate = pDevice->byTopOFDMBasicRate;
-    if (wOldBasicRate != pDevice->wBasicRate)
-	CARDvSetRSPINF((void *)pDevice, pDevice->byBBType);
+	*pbyTopCCKRate = pDevice->byTopCCKBasicRate;
+	*pbyTopOFDMRate = pDevice->byTopOFDMBasicRate;
+	*pwMaxSuppRate = RATEwGetRateIdx(byHighSuppRate);
+	if ((pDevice->byPacketType == PK_TYPE_11B) || (pDevice->byPacketType == PK_TYPE_11GB))
+		*pwMaxBasicRate = pDevice->byTopCCKBasicRate;
+	else
+		*pwMaxBasicRate = pDevice->byTopOFDMBasicRate;
+	if (wOldBasicRate != pDevice->wBasicRate)
+		CARDvSetRSPINF((void *)pDevice, pDevice->byBBType);
 
-     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Exit ParseMaxRate\n");
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Exit ParseMaxRate\n");
 }
 
 /*+
@@ -263,71 +265,68 @@
 
 	psNodeDBTable->uTimeCount++;
 
-    if (psNodeDBTable->uTxFail[MAX_RATE] > psNodeDBTable->uTxOk[MAX_RATE])
-        dwTxDiff = psNodeDBTable->uTxFail[MAX_RATE] - psNodeDBTable->uTxOk[MAX_RATE];
+	if (psNodeDBTable->uTxFail[MAX_RATE] > psNodeDBTable->uTxOk[MAX_RATE])
+		dwTxDiff = psNodeDBTable->uTxFail[MAX_RATE] - psNodeDBTable->uTxOk[MAX_RATE];
 
-    if ((psNodeDBTable->uTxOk[MAX_RATE] < AUTORATE_TXOK_CNT) &&
-        (dwTxDiff < AUTORATE_TXFAIL_CNT) &&
-        (psNodeDBTable->uTimeCount < AUTORATE_TIMEOUT)) {
-        return;
-    }
+	if ((psNodeDBTable->uTxOk[MAX_RATE] < AUTORATE_TXOK_CNT) &&
+			(dwTxDiff < AUTORATE_TXFAIL_CNT) &&
+			(psNodeDBTable->uTimeCount < AUTORATE_TIMEOUT)) {
+		return;
+	}
 
-    if (psNodeDBTable->uTimeCount >= AUTORATE_TIMEOUT) {
-        psNodeDBTable->uTimeCount = 0;
-    }
+	if (psNodeDBTable->uTimeCount >= AUTORATE_TIMEOUT)
+		psNodeDBTable->uTimeCount = 0;
 
-    for (ii = 0; ii < MAX_RATE; ii++) {
-        if (psNodeDBTable->wSuppRate & (0x0001<<ii)) {
-            if (bAutoRate[ii] == true) {
-                wIdxUpRate = (u16) ii;
-            }
-        } else {
-            bAutoRate[ii] = false;
-        }
-    }
+	for (ii = 0; ii < MAX_RATE; ii++) {
+		if (psNodeDBTable->wSuppRate & (0x0001<<ii)) {
+			if (bAutoRate[ii] == true)
+				wIdxUpRate = (u16) ii;
+		} else {
+			bAutoRate[ii] = false;
+		}
+	}
 
-    for (ii = 0; ii <= psNodeDBTable->wTxDataRate; ii++) {
-        if ( (psNodeDBTable->uTxOk[ii] != 0) ||
-             (psNodeDBTable->uTxFail[ii] != 0) ) {
-            dwThroughputTbl[ii] *= psNodeDBTable->uTxOk[ii];
-            if (ii < RATE_11M) {
-                psNodeDBTable->uTxFail[ii] *= 4;
-            }
-            dwThroughputTbl[ii] /= (psNodeDBTable->uTxOk[ii] + psNodeDBTable->uTxFail[ii]);
-        }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Rate %d,Ok: %d, Fail:%d, Throughput:%d\n",
-                       ii, (int)psNodeDBTable->uTxOk[ii], (int)psNodeDBTable->uTxFail[ii], (int)dwThroughputTbl[ii]);
-    }
-    dwThroughput = dwThroughputTbl[psNodeDBTable->wTxDataRate];
+	for (ii = 0; ii <= psNodeDBTable->wTxDataRate; ii++) {
+		if ((psNodeDBTable->uTxOk[ii] != 0) ||
+				(psNodeDBTable->uTxFail[ii] != 0)) {
+			dwThroughputTbl[ii] *= psNodeDBTable->uTxOk[ii];
+			if (ii < RATE_11M)
+				psNodeDBTable->uTxFail[ii] *= 4;
+			dwThroughputTbl[ii] /= (psNodeDBTable->uTxOk[ii] + psNodeDBTable->uTxFail[ii]);
+		}
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Rate %d,Ok: %d, Fail:%d, Throughput:%d\n",
+				ii, (int)psNodeDBTable->uTxOk[ii], (int)psNodeDBTable->uTxFail[ii], (int)dwThroughputTbl[ii]);
+	}
+	dwThroughput = dwThroughputTbl[psNodeDBTable->wTxDataRate];
 
-    wIdxDownRate = psNodeDBTable->wTxDataRate;
-    for (ii = psNodeDBTable->wTxDataRate; ii > 0;) {
-        ii--;
-        if ( (dwThroughputTbl[ii] > dwThroughput) &&
-             (bAutoRate[ii]==true) ) {
-            dwThroughput = dwThroughputTbl[ii];
-            wIdxDownRate = (u16) ii;
-        }
-    }
-    psNodeDBTable->wTxDataRate = wIdxDownRate;
-    if (psNodeDBTable->uTxOk[MAX_RATE]) {
-        if (psNodeDBTable->uTxOk[MAX_RATE] >
-           (psNodeDBTable->uTxFail[MAX_RATE] * 4) ) {
-            psNodeDBTable->wTxDataRate = wIdxUpRate;
-        }
-    } else { /* adhoc, if uTxOk(total) == 0 & uTxFail(total) == 0 */
-        if (psNodeDBTable->uTxFail[MAX_RATE] == 0)
-            psNodeDBTable->wTxDataRate = wIdxUpRate;
-    }
+	wIdxDownRate = psNodeDBTable->wTxDataRate;
+	for (ii = psNodeDBTable->wTxDataRate; ii > 0;) {
+		ii--;
+		if ((dwThroughputTbl[ii] > dwThroughput) &&
+				(bAutoRate[ii] == true)) {
+			dwThroughput = dwThroughputTbl[ii];
+			wIdxDownRate = (u16) ii;
+		}
+	}
+	psNodeDBTable->wTxDataRate = wIdxDownRate;
+	if (psNodeDBTable->uTxOk[MAX_RATE]) {
+		if (psNodeDBTable->uTxOk[MAX_RATE] >
+				(psNodeDBTable->uTxFail[MAX_RATE] * 4)) {
+			psNodeDBTable->wTxDataRate = wIdxUpRate;
+		}
+	} else { /* adhoc, if uTxOk(total) == 0 & uTxFail(total) == 0 */
+		if (psNodeDBTable->uTxFail[MAX_RATE] == 0)
+			psNodeDBTable->wTxDataRate = wIdxUpRate;
+	}
 
-    if (pDevice->byBBType == BB_TYPE_11A) {
-        if (psNodeDBTable->wTxDataRate <= RATE_11M)
-            psNodeDBTable->wTxDataRate = RATE_6M;
-    }
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uTxOk[MAX_RATE] %d, uTxFail[MAX_RATE]:%d\n",(int)psNodeDBTable->uTxOk[MAX_RATE], (int)psNodeDBTable->uTxFail[MAX_RATE]);
-    s_vResetCounter(psNodeDBTable);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Rate: %d, U:%d, D:%d\n", (int)psNodeDBTable->wTxDataRate, (int)wIdxUpRate, (int)wIdxDownRate);
-    return;
+	if (pDevice->byBBType == BB_TYPE_11A) {
+		if (psNodeDBTable->wTxDataRate <= RATE_11M)
+			psNodeDBTable->wTxDataRate = RATE_6M;
+	}
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uTxOk[MAX_RATE] %d, uTxFail[MAX_RATE]:%d\n", (int)psNodeDBTable->uTxOk[MAX_RATE], (int)psNodeDBTable->uTxFail[MAX_RATE]);
+	s_vResetCounter(psNodeDBTable);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Rate: %d, U:%d, D:%d\n", (int)psNodeDBTable->wTxDataRate, (int)wIdxUpRate, (int)wIdxDownRate);
+	return;
 }
 
 /*+
@@ -343,29 +342,24 @@
  * Return Value: None
  *
 -*/
-u8
-RATEuSetIE (
-     PWLAN_IE_SUPP_RATES pSrcRates,
-     PWLAN_IE_SUPP_RATES pDstRates,
-     unsigned int                uRateLen
-    )
+u8 RATEuSetIE(PWLAN_IE_SUPP_RATES pSrcRates, PWLAN_IE_SUPP_RATES pDstRates,
+		unsigned int uRateLen)
 {
-    unsigned int ii, uu, uRateCnt = 0;
+	unsigned int ii, uu, uRateCnt = 0;
 
-    if ((pSrcRates == NULL) || (pDstRates == NULL))
-        return 0;
+	if ((pSrcRates == NULL) || (pDstRates == NULL))
+		return 0;
 
-    if (pSrcRates->len == 0)
-        return 0;
+	if (pSrcRates->len == 0)
+		return 0;
 
-    for (ii = 0; ii < uRateLen; ii++) {
-        for (uu = 0; uu < pSrcRates->len; uu++) {
-            if ((pSrcRates->abyRates[uu] & 0x7F) == acbyIERate[ii]) {
-                pDstRates->abyRates[uRateCnt ++] = pSrcRates->abyRates[uu];
-                break;
-            }
-        }
-    }
-    return (u8)uRateCnt;
+	for (ii = 0; ii < uRateLen; ii++) {
+		for (uu = 0; uu < pSrcRates->len; uu++) {
+			if ((pSrcRates->abyRates[uu] & 0x7F) == acbyIERate[ii]) {
+				pDstRates->abyRates[uRateCnt++] = pSrcRates->abyRates[uu];
+				break;
+			}
+		}
+	}
+	return (u8)uRateCnt;
 }
-
diff --git a/drivers/staging/vt6656/desc.h b/drivers/staging/vt6656/desc.h
index 4675135..afe7074 100644
--- a/drivers/staging/vt6656/desc.h
+++ b/drivers/staging/vt6656/desc.h
@@ -146,15 +146,6 @@
 /*
  * TX FIFO header
  */
-typedef struct tagSTxBufHead {
-	u32 adwTxKey[4];
-    u16    wFIFOCtl;
-    u16    wTimeStamp;
-    u16    wFragCtl;
-    u16    wReserved;
-} __attribute__ ((__packed__))
-STxBufHead, *PSTxBufHead;
-typedef const STxBufHead *PCSTxBufHead;
 
 typedef struct tagSTxShortBufHead {
     u16    wFIFOCtl;
diff --git a/drivers/staging/vt6656/device.h b/drivers/staging/vt6656/device.h
index 8e39634..62b7de1 100644
--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -384,8 +384,8 @@
 
 	struct tasklet_struct CmdWorkItem;
 	struct tasklet_struct EventWorkItem;
-	struct tasklet_struct ReadWorkItem;
-	struct tasklet_struct RxMngWorkItem;
+	struct work_struct read_work_item;
+	struct work_struct rx_mng_work_item;
 
 	u32 rx_buf_sz;
 	int multicast_limit;
@@ -579,6 +579,9 @@
 	u8 abyOFDMAPwrTbl[42];
 
 	u16 wCurrentRate;
+	u16 tx_rate_fb0;
+	u16 tx_rate_fb1;
+
 	u16 wRTSThreshold;
 	u16 wFragmentationThreshold;
 	u8 byShortRetryLimit;
@@ -707,13 +710,12 @@
 	u8 byBBCR09;
 
 	/* command timer */
-	struct timer_list sTimerCommand;
+	struct delayed_work run_command_work;
+	/* One second callback */
+	struct delayed_work second_callback_work;
 
-	struct timer_list sTimerTxData;
-	unsigned long nTxDataTimeCout;
-	int fTxDataInSleep;
-	int IsTxDataTrigger;
-
+	u8 tx_data_time_out;
+	bool tx_trigger;
 	int fWPA_Authened; /*is WPA/WPA-PSK or WPA2/WPA2-PSK authen?? */
 	u8 byReAssocCount;
 	u8 byLinkWaitCount;
diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index ea7d443..75dc92d 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -136,9 +136,9 @@
     };
 
     pbyRxBuffer = (u8 *) (pbyRxBufferAddr + cbHeaderSize);
-    if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_Bridgetunnel[0])) {
+    if (ether_addr_equal(pbyRxBuffer, pDevice->abySNAP_Bridgetunnel)) {
         cbHeaderSize += 6;
-    } else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
+    } else if (ether_addr_equal(pbyRxBuffer, pDevice->abySNAP_RFC1042)) {
         cbHeaderSize += 6;
         pwType = (u16 *) (pbyRxBufferAddr + cbHeaderSize);
 	if ((*pwType == cpu_to_be16(ETH_P_IPX)) ||
@@ -361,7 +361,7 @@
     if ((pMgmt->eCurrMode == WMAC_MODE_STANDBY) ||
         (pMgmt->eCurrMode == WMAC_MODE_ESS_STA)) {
        if (pMgmt->sNodeDBTable[0].bActive) {
-	 if (!compare_ether_addr(pMgmt->abyCurrBSSID, pMACHeader->addr2)) {
+	 if (ether_addr_equal(pMgmt->abyCurrBSSID, pMACHeader->addr2)) {
 	    if (pMgmt->sNodeDBTable[0].uInActiveCount != 0)
                   pMgmt->sNodeDBTable[0].uInActiveCount = 0;
            }
@@ -374,8 +374,7 @@
             return false;
         }
 
-	if (compare_ether_addr(pDevice->abyCurrentNetAddr,
-			       pMACHeader->addr1)) {
+	if (!ether_addr_equal(pDevice->abyCurrentNetAddr, pMACHeader->addr1)) {
 		return false;
         }
     }
@@ -383,8 +382,8 @@
     // Use for TKIP MIC
     s_vGetDASA(pbyFrame, &cbHeaderSize, &pDevice->sRxEthHeader);
 
-    if (!compare_ether_addr((u8 *)&(pDevice->sRxEthHeader.h_source[0]),
-			    pDevice->abyCurrentNetAddr))
+    if (ether_addr_equal((u8 *)pDevice->sRxEthHeader.h_source,
+			 pDevice->abyCurrentNetAddr))
         return false;
 
     if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) || (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)) {
@@ -560,7 +559,7 @@
             }
             if (pDevice->bIsRxMngWorkItemQueued == false) {
                 pDevice->bIsRxMngWorkItemQueued = true;
-                tasklet_schedule(&pDevice->RxMngWorkItem);
+		schedule_work(&pDevice->rx_mng_work_item);
             }
 
         }
@@ -1333,11 +1332,16 @@
     return true;
 }
 
-void RXvWorkItem(struct vnt_private *pDevice)
+void RXvWorkItem(struct work_struct *work)
 {
+	struct vnt_private *pDevice =
+		container_of(work, struct vnt_private, read_work_item);
 	int ntStatus;
 	struct vnt_rcb *pRCB = NULL;
 
+	if (pDevice->Flags & fMP_DISCONNECTED)
+		return;
+
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->Rx Polling Thread\n");
     spin_lock_irq(&pDevice->lock);
 
@@ -1384,17 +1388,22 @@
         (pDevice->bIsRxWorkItemQueued == false) ) {
 
         pDevice->bIsRxWorkItemQueued = true;
-        tasklet_schedule(&pDevice->ReadWorkItem);
+	schedule_work(&pDevice->read_work_item);
     }
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"<----RXFreeRCB %d %d\n",pDevice->NumRecvFreeList, pDevice->NumRecvMngList);
 }
 
-void RXvMngWorkItem(struct vnt_private *pDevice)
+void RXvMngWorkItem(struct work_struct *work)
 {
+	struct vnt_private *pDevice =
+		container_of(work, struct vnt_private, rx_mng_work_item);
 	struct vnt_rcb *pRCB = NULL;
 	struct vnt_rx_mgmt *pRxPacket;
 	int bReAllocSkb = false;
 
+	if (pDevice->Flags & fMP_DISCONNECTED)
+		return;
+
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->Rx Mng Thread\n");
 
     spin_lock_irq(&pDevice->lock);
diff --git a/drivers/staging/vt6656/dpc.h b/drivers/staging/vt6656/dpc.h
index 95388dc..8d52434 100644
--- a/drivers/staging/vt6656/dpc.h
+++ b/drivers/staging/vt6656/dpc.h
@@ -32,9 +32,9 @@
 #include "device.h"
 #include "wcmd.h"
 
-void RXvWorkItem(void *Context);
+void RXvWorkItem(struct work_struct *work);
 
-void RXvMngWorkItem(void *Context);
+void RXvMngWorkItem(struct work_struct *work);
 
 void RXvFreeRCB(struct vnt_rcb *pRCB, int bReAllocSkb);
 
diff --git a/drivers/staging/vt6656/firmware.c b/drivers/staging/vt6656/firmware.c
index a1dc3a4..cd2ea76 100644
--- a/drivers/staging/vt6656/firmware.c
+++ b/drivers/staging/vt6656/firmware.c
@@ -35,8 +35,8 @@
 #include "control.h"
 #include "rndis.h"
 
-static int          msglevel                =MSG_LEVEL_INFO;
-//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int msglevel = MSG_LEVEL_INFO;
+/* static int msglevel = MSG_LEVEL_DEBUG; */
 
 #define FIRMWARE_VERSION	0x133		/* version 1.51 */
 #define FIRMWARE_NAME		"vntwusb.fw"
@@ -72,18 +72,17 @@
 		memcpy(pBuffer, fw->data + ii, wLength);
 
 		NdisStatus = CONTROLnsRequestOutAsyn(pDevice,
-                                            0,
-                                            0x1200+ii,
-                                            0x0000,
-                                            wLength,
-                                            pBuffer
-                                            );
+						0,
+						0x1200+ii,
+						0x0000,
+						wLength,
+						pBuffer);
 
 		DBG_PRT(MSG_LEVEL_DEBUG,
 			KERN_INFO"Download firmware...%d %zu\n", ii, fw->size);
 		if (NdisStatus != STATUS_SUCCESS)
 			goto free_fw;
-        }
+	}
 
 	result = true;
 free_fw:
@@ -101,48 +100,47 @@
 {
 	int NdisStatus;
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->Branch to Sram\n");
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->Branch to Sram\n");
 
-    NdisStatus = CONTROLnsRequestOut(pDevice,
-                                    1,
-                                    0x1200,
-                                    0x0000,
-                                    0,
-                                    NULL
-                                    );
-
-    if (NdisStatus != STATUS_SUCCESS) {
-        return (false);
-    } else {
-        return (true);
-    }
+	NdisStatus = CONTROLnsRequestOut(pDevice,
+					1,
+					0x1200,
+					0x0000,
+					0,
+					NULL);
+	if (NdisStatus != STATUS_SUCCESS)
+		return false;
+	else
+		return true;
 }
 
 int FIRMWAREbCheckVersion(struct vnt_private *pDevice)
 {
 	int ntStatus;
 
-    ntStatus = CONTROLnsRequestIn(pDevice,
-                                    MESSAGE_TYPE_READ,
-                                    0,
-                                    MESSAGE_REQUEST_VERSION,
-                                    2,
-                                    (u8 *) &(pDevice->wFirmwareVersion));
+	ntStatus = CONTROLnsRequestIn(pDevice,
+					MESSAGE_TYPE_READ,
+					0,
+					MESSAGE_REQUEST_VERSION,
+					2,
+					(u8 *) &(pDevice->wFirmwareVersion));
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Firmware Version [%04x]\n", pDevice->wFirmwareVersion);
-    if (ntStatus != STATUS_SUCCESS) {
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Firmware Invalid.\n");
-        return false;
-    }
-    if (pDevice->wFirmwareVersion == 0xFFFF) {
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"In Loader.\n");
-        return false;
-    }
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Firmware Version [%04x]\n", pDevice->wFirmwareVersion);
-    if (pDevice->wFirmwareVersion < FIRMWARE_VERSION) {
-        // branch to loader for download new firmware
-        FIRMWAREbBrach2Sram(pDevice);
-        return false;
-    }
-    return true;
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Firmware Version [%04x]\n",
+						pDevice->wFirmwareVersion);
+	if (ntStatus != STATUS_SUCCESS) {
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Firmware Invalid.\n");
+		return false;
+	}
+	if (pDevice->wFirmwareVersion == 0xFFFF) {
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"In Loader.\n");
+		return false;
+	}
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Firmware Version [%04x]\n",
+						pDevice->wFirmwareVersion);
+	if (pDevice->wFirmwareVersion < FIRMWARE_VERSION) {
+		/* branch to loader for download new firmware */
+		FIRMWAREbBrach2Sram(pDevice);
+		return false;
+	}
+	return true;
 }
diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c
index c699a30..ae1676d 100644
--- a/drivers/staging/vt6656/hostap.c
+++ b/drivers/staging/vt6656/hostap.c
@@ -414,7 +414,7 @@
 	int ret = 0;
 	s32 iNodeIndex = -1;
 	int ii;
-	int bKeyTableFull = false;
+	bool bKeyTableFull = false;
 	u16 wKeyCtl = 0;
 
 	param->u.crypt.err = 0;
@@ -685,7 +685,7 @@
 	    p->length > VIAWGET_HOSTAPD_MAX_BUF_SIZE || !p->pointer)
 		return -EINVAL;
 
-	param = kmalloc((int)p->length, (int)GFP_KERNEL);
+	param = kmalloc((int)p->length, GFP_KERNEL);
 	if (param == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c
index 8872e0f..63917ab 100644
--- a/drivers/staging/vt6656/iwctl.c
+++ b/drivers/staging/vt6656/iwctl.c
@@ -60,7 +60,7 @@
 	pDevice->wstats.status = pDevice->eOPMode;
 	if (pDevice->scStatistic.LinkQuality > 100)
 		pDevice->scStatistic.LinkQuality = 100;
-	pDevice->wstats.qual.qual =(u8)pDevice->scStatistic.LinkQuality;
+	pDevice->wstats.qual.qual = (u8)pDevice->scStatistic.LinkQuality;
 	RFvRSSITodBm(pDevice, (u8)(pDevice->uCurrRSSI), &ldBm);
 	pDevice->wstats.qual.level = ldBm;
 	pDevice->wstats.qual.noise = 0;
@@ -190,7 +190,7 @@
 		return -EAGAIN;
 	}
 	pBSS = &(pMgmt->sBSSList[0]);
-	for (ii = 0, jj = 0; jj < MAX_BSS_NUM ; jj++) {
+	for (ii = 0, jj = 0; jj < MAX_BSS_NUM; jj++) {
 		if (current_ev >= end_buf)
 			break;
 		pBSS = &(pMgmt->sBSSList[jj]);
@@ -225,7 +225,7 @@
 			iwe.u.freq.m = pBSS->uChannel;
 			iwe.u.freq.e = 0;
 			iwe.u.freq.i = 0;
-			current_ev = iwe_stream_add_event(info, current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
+			current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
 			{
 				int f = (int)pBSS->uChannel - 1;
 				if (f < 0)
@@ -400,7 +400,7 @@
 			if (pDevice->flags & DEVICE_FLAGS_OPENED)
 				pDevice->bCommit = true;
 		}
-		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to ad-hoc \n");
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to ad-hoc\n");
 		break;
 	case IW_MODE_AUTO:
 	case IW_MODE_INFRA:
@@ -409,7 +409,7 @@
 			if (pDevice->flags & DEVICE_FLAGS_OPENED)
 				pDevice->bCommit = true;
 		}
-		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to infrastructure \n");
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to infrastructure\n");
 		break;
 	case IW_MODE_MASTER:
 
@@ -422,7 +422,7 @@
 			if (pDevice->flags & DEVICE_FLAGS_OPENED)
 				pDevice->bCommit = true;
 		}
-		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to Access Point \n");
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to Access Point\n");
 		break;
 
 	case IW_MODE_REPEAT:
@@ -657,8 +657,8 @@
 			unsigned uSameBssidNum = 0;
 			for (ii = 0; ii < MAX_BSS_NUM; ii++) {
 				if (pMgmt->sBSSList[ii].bActive &&
-					!compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
-							pMgmt->abyDesireBSSID)) {
+					ether_addr_equal(pMgmt->sBSSList[ii].abyBSSID,
+							 pMgmt->abyDesireBSSID)) {
 					uSameBssidNum++;
 				}
 			}
@@ -786,8 +786,8 @@
 	if (wrq->flags == 0) {
 		// Just send an empty SSID list
 		memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
-		memset(pMgmt->abyDesireBSSID, 0xFF,6);
-		PRINT_K("set essid to 'any' \n");
+		memset(pMgmt->abyDesireBSSID, 0xFF, 6);
+		PRINT_K("set essid to 'any'\n");
 		// Unknown desired AP, so here need not associate??
 		return 0;
 	} else {
@@ -798,15 +798,15 @@
 
 		memcpy(pItemSSID->abySSID, extra, wrq->length);
 		if (pItemSSID->abySSID[wrq->length] == '\0') {
-			if (wrq->length>0)
+			if (wrq->length > 0)
 				pItemSSID->len = wrq->length;
 		} else {
 			pItemSSID->len = wrq->length;
 		}
-		PRINT_K("set essid to %s \n", pItemSSID->abySSID);
+		PRINT_K("set essid to %s\n", pItemSSID->abySSID);
 
 		// mike: need clear desiredBSSID
-		if (pItemSSID->len==0) {
+		if (pItemSSID->len == 0) {
 			memset(pMgmt->abyDesireBSSID, 0xFF, 6);
 			return 0;
 		}
@@ -840,8 +840,8 @@
 				// are two same BSSID exist in list ?
 				for (ii = 0; ii < MAX_BSS_NUM; ii++) {
 					if (pMgmt->sBSSList[ii].bActive &&
-						!compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
-								pCurr->abyBSSID)) {
+						ether_addr_equal(pMgmt->sBSSList[ii].abyBSSID,
+								 pCurr->abyBSSID)) {
 						uSameBssidNum++;
 					}
 				}
@@ -860,7 +860,7 @@
 			return 0;
 		}
 
-		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set essid = %s \n", pItemSSID->abySSID);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set essid = %s\n", pItemSSID->abySSID);
 	}
 
 	if (pDevice->flags & DEVICE_FLAGS_OPENED)
@@ -893,7 +893,7 @@
 	memcpy(extra, pItemSSID->abySSID, pItemSSID->len);
 	extra[pItemSSID->len] = '\0';
 
-        wrq->length = pItemSSID->len;
+	wrq->length = pItemSSID->len;
 	wrq->flags = 1; // active
 
 	return 0;
@@ -915,7 +915,7 @@
 		0x60, 0x6C, 0x90
 	};
 
-	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRATE \n");
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRATE\n");
 	if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
 		rc = -EINVAL;
 		return rc;
@@ -953,7 +953,7 @@
 	}
 	// Check that it is valid
 	// brate is index of abySupportedRates[]
-	if (brate > 13 ) {
+	if (brate > 13) {
 		rc = -EINVAL;
 		return rc;
 	}
@@ -967,7 +967,7 @@
 			pDevice->uConnectionRate = 3;
 		} else {
 			pDevice->uConnectionRate = brate;
-			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Fixed to Rate %d \n", pDevice->uConnectionRate);
+			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Fixed to Rate %d\n", pDevice->uConnectionRate);
 		}
 	} else {
 		pDevice->bFixRate = false;
@@ -1017,7 +1017,7 @@
 			if (pDevice->byBBType == BB_TYPE_11A)
 				brate = 0x6C;
 		}
-    		if (pDevice->uConnectionRate == 13)
+		if (pDevice->uConnectionRate == 13)
 			brate = abySupportedRates[pDevice->wCurrentRate];
 		wrq->value = brate * 500000;
 		// If more than one rate, set auto
@@ -1286,7 +1286,7 @@
 	if (index < 1) { // get default key
 		if (pDevice->byKeyIndex < WLAN_WEP_NKEYS)
 			index = pDevice->byKeyIndex;
-         	else
+		else
 			index = 0;
 	} else {
 		index--;
@@ -1366,14 +1366,14 @@
 
 	switch (wrq->flags & IW_POWER_MODE) {
 	case IW_POWER_UNICAST_R:
-		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_UNICAST_R \n");
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_UNICAST_R\n");
 		rc = -EINVAL;
 		break;
 	case IW_POWER_ALL_R:
-		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_ALL_R \n");
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_ALL_R\n");
 		rc = -EINVAL;
 	case IW_POWER_ON:
-		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_ON \n");
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_ON\n");
 		break;
 	default:
 		rc = -EINVAL;
@@ -1465,7 +1465,7 @@
 	case IW_AUTH_CIPHER_PAIRWISE:
 		pairwise = wrq->value;
 		PRINT_K("iwctl_siwauth:set pairwise=%d\n", pairwise);
-		if (pairwise == IW_AUTH_CIPHER_CCMP){
+		if (pairwise == IW_AUTH_CIPHER_CCMP) {
 			pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
 		} else if (pairwise == IW_AUTH_CIPHER_TKIP) {
 			pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
@@ -1490,13 +1490,13 @@
 		}
 		break;
 	case IW_AUTH_KEY_MGMT:
-		PRINT_K("iwctl_siwauth(wpa_version=%d):set KEY_MGMT=%d\n", wpa_version,wrq->value);
-		if (wpa_version == IW_AUTH_WPA_VERSION_WPA2){
+		PRINT_K("iwctl_siwauth(wpa_version=%d):set KEY_MGMT=%d\n", wpa_version, wrq->value);
+		if (wpa_version == IW_AUTH_WPA_VERSION_WPA2) {
 			if (wrq->value == IW_AUTH_KEY_MGMT_PSK)
 				pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK;
 			else pMgmt->eAuthenMode = WMAC_AUTH_WPA2;
 		} else if (wpa_version == IW_AUTH_WPA_VERSION_WPA) {
-			if (wrq->value == 0){
+			if (wrq->value == 0) {
 				pMgmt->eAuthenMode = WMAC_AUTH_WPANONE;
 			} else if (wrq->value == IW_AUTH_KEY_MGMT_PSK)
 				pMgmt->eAuthenMode = WMAC_AUTH_WPAPSK;
@@ -1558,17 +1558,17 @@
 	if (pMgmt == NULL)
 		return -EFAULT;
 
-	if (wrq->length){
+	if (wrq->length) {
 		if ((wrq->length < 2) || (extra[1] + 2 != wrq->length)) {
 			ret = -EINVAL;
 			goto out;
 		}
-		if (wrq->length > MAX_WPA_IE_LEN){
+		if (wrq->length > MAX_WPA_IE_LEN) {
 			ret = -ENOMEM;
 			goto out;
 		}
 		memset(pMgmt->abyWPAIE, 0, MAX_WPA_IE_LEN);
-		if (copy_from_user(pMgmt->abyWPAIE, extra, wrq->length)){
+		if (copy_from_user(pMgmt->abyWPAIE, extra, wrq->length)) {
 			ret = -EFAULT;
 			goto out;
 		}
@@ -1615,7 +1615,7 @@
 	struct vnt_manager *pMgmt = &pDevice->vnt_mgmt;
 	struct iw_point *wrq = &wrqu->encoding;
 	struct iw_encode_ext *ext = (struct iw_encode_ext*)extra;
-	struct viawget_wpa_param *param=NULL;
+	struct viawget_wpa_param *param = NULL;
 // original member
 	wpa_alg alg_name;
 	u8 addr[6];
@@ -1658,8 +1658,8 @@
 		alg_name = WPA_ALG_CCMP;
 		break;
 	default:
-		PRINT_K("Unknown alg = %d\n",ext->alg);
-		ret= -ENOMEM;
+		PRINT_K("Unknown alg = %d\n", ext->alg);
+		ret = -ENOMEM;
 		goto error;
 	}
 // recover addr
@@ -1671,7 +1671,7 @@
 		set_tx = 1;
 // recover seq,seq_len
 	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
-		seq_len=IW_ENCODE_SEQ_MAX_SIZE;
+		seq_len = IW_ENCODE_SEQ_MAX_SIZE;
 		memcpy(seq, ext->rx_seq, seq_len);
 	}
 // recover key,key_len
@@ -1702,7 +1702,7 @@
 /****set if current action is Network Manager count?? */
 /****this method is so foolish,but there is no other way??? */
 	if (param->u.wpa_key.alg_name == WPA_ALG_NONE) {
-		if (param->u.wpa_key.key_index ==0) {
+		if (param->u.wpa_key.key_index == 0) {
 			pDevice->bwextstep0 = true;
 		}
 		if ((pDevice->bwextstep0 == true) && (param->u.wpa_key.key_index == 1)) {
@@ -1761,7 +1761,7 @@
 		ret = -EINVAL;
 		return ret;
 	}
-	switch (mlme->cmd){
+	switch (mlme->cmd) {
 	case IW_MLME_DEAUTH:
 	case IW_MLME_DISASSOC:
 		if (pDevice->bLinkPass == true) {
@@ -1815,7 +1815,6 @@
 	IW_HANDLER(SIOCGIWPOWER, iwctl_giwpower),
 	IW_HANDLER(SIOCSIWGENIE, iwctl_siwgenie),
 	IW_HANDLER(SIOCGIWGENIE, iwctl_giwgenie),
-	IW_HANDLER(SIOCSIWMLME, iwctl_siwmlme),
 	IW_HANDLER(SIOCSIWAUTH, iwctl_siwauth),
 	IW_HANDLER(SIOCGIWAUTH, iwctl_giwauth),
 	IW_HANDLER(SIOCSIWENCODEEXT, iwctl_siwencodeext),
diff --git a/drivers/staging/vt6656/key.c b/drivers/staging/vt6656/key.c
index 205590b..be92c04 100644
--- a/drivers/staging/vt6656/key.c
+++ b/drivers/staging/vt6656/key.c
@@ -151,7 +151,7 @@
     *pKey = NULL;
     for (i=0;i<MAX_KEY_TABLE;i++) {
         if ((pTable->KeyTable[i].bInUse == true) &&
-	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+	    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             if (dwKeyIndex == 0xFFFFFFFF) {
                 if (pTable->KeyTable[i].PairwiseKey.bKeyValid == true) {
                     *pKey = &(pTable->KeyTable[i].PairwiseKey);
@@ -213,7 +213,7 @@
             j = i;
         }
         if ((pTable->KeyTable[i].bInUse == true) &&
-	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+	    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             // found table already exist
             if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
                 // Pairwise key
@@ -395,7 +395,7 @@
     } else {
         for (i=0;i<MAX_KEY_TABLE;i++) {
             if ( (pTable->KeyTable[i].bInUse == true) &&
-		 !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+		 ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 
                 if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
                     pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
@@ -445,7 +445,7 @@
 
     for (i=0;i<MAX_KEY_TABLE;i++) {
         if ((pTable->KeyTable[i].bInUse == true) &&
-	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+	    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
 	    for (u = 0; u < MAX_GROUP_KEY; u++)
 		pTable->KeyTable[i].GroupKey[u].bKeyValid = false;
@@ -480,7 +480,7 @@
 
     for (i = 0; i < MAX_KEY_TABLE; i++) {
         if ((pTable->KeyTable[i].bInUse == true) &&
-	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+	    ether_addr_equal(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 
             if (dwKeyType == PAIRWISE_KEY) {
 
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 6f9d281..aae228c 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -702,6 +702,16 @@
 
 	device_set_options(pDevice);
 	spin_lock_init(&pDevice->lock);
+	INIT_DELAYED_WORK(&pDevice->run_command_work, vRunCommand);
+	INIT_DELAYED_WORK(&pDevice->second_callback_work, BSSvSecondCallBack);
+	INIT_WORK(&pDevice->read_work_item, RXvWorkItem);
+	INIT_WORK(&pDevice->rx_mng_work_item, RXvMngWorkItem);
+
+	pDevice->pControlURB = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!pDevice->pControlURB) {
+		DBG_PRT(MSG_LEVEL_ERR, KERN_ERR"Failed to alloc control urb\n");
+		goto err_netdev;
+	}
 
 	pDevice->tx_80211 = device_dma0_tx_80211;
 	pDevice->vnt_mgmt.pAdapter = (void *) pDevice;
@@ -713,14 +723,15 @@
 	usb_set_intfdata(intf, pDevice);
 	SET_NETDEV_DEV(netdev, &intf->dev);
 	memcpy(pDevice->dev->dev_addr, fake_mac, ETH_ALEN);
+
+	usb_device_reset(pDevice);
+
 	rc = register_netdev(netdev);
 	if (rc) {
 		printk(KERN_ERR DEVICE_NAME " Failed to register netdev\n");
 		goto err_netdev;
 	}
 
-	usb_device_reset(pDevice);
-
 	return 0;
 
 err_netdev:
@@ -849,23 +860,15 @@
         pRCB++;
     }
 
-	pDevice->pControlURB = usb_alloc_urb(0, GFP_ATOMIC);
-	if (pDevice->pControlURB == NULL) {
-	    DBG_PRT(MSG_LEVEL_ERR,KERN_ERR"Failed to alloc control urb\n");
-	    goto free_rx_tx;
-	}
-
 	pDevice->pInterruptURB = usb_alloc_urb(0, GFP_ATOMIC);
 	if (pDevice->pInterruptURB == NULL) {
 	    DBG_PRT(MSG_LEVEL_ERR,KERN_ERR"Failed to alloc int urb\n");
-	    usb_free_urb(pDevice->pControlURB);
 	    goto free_rx_tx;
 	}
 
     pDevice->intBuf.pDataBuf = kmalloc(MAX_INTERRUPT_SIZE, GFP_KERNEL);
 	if (pDevice->intBuf.pDataBuf == NULL) {
 	    DBG_PRT(MSG_LEVEL_ERR,KERN_ERR"Failed to alloc int buf\n");
-	    usb_free_urb(pDevice->pControlURB);
 	    usb_free_urb(pDevice->pInterruptURB);
 	    goto free_rx_tx;
 	}
@@ -981,10 +984,11 @@
     }
 
     vMgrObjectInit(pDevice);
-    tasklet_init(&pDevice->RxMngWorkItem, (void *)RXvMngWorkItem, (unsigned long)pDevice);
-    tasklet_init(&pDevice->ReadWorkItem, (void *)RXvWorkItem, (unsigned long)pDevice);
+
     tasklet_init(&pDevice->EventWorkItem, (void *)INTvWorkItem, (unsigned long)pDevice);
-	add_timer(&pDevice->vnt_mgmt.sTimerSecondCallback);
+
+	schedule_delayed_work(&pDevice->second_callback_work, HZ);
+
 	pDevice->int_interval = 100;  /* max 100 microframes */
     pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
 
@@ -1000,7 +1004,7 @@
      pDevice->bWPASuppWextEnabled = false;
     pDevice->byReAssocCount = 0;
 
-    RXvWorkItem(pDevice);
+	schedule_work(&pDevice->read_work_item);
     INTvWorkItem(pDevice);
 
     /* if WEP key already set by iwconfig but device not yet open */
@@ -1035,9 +1039,7 @@
     device_free_rx_bufs(pDevice);
     device_free_tx_bufs(pDevice);
     device_free_int_bufs(pDevice);
-	usb_kill_urb(pDevice->pControlURB);
 	usb_kill_urb(pDevice->pInterruptURB);
-    usb_free_urb(pDevice->pControlURB);
     usb_free_urb(pDevice->pInterruptURB);
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_open fail.. \n");
@@ -1076,18 +1078,19 @@
     MP_CLEAR_FLAG(pDevice, fMP_POST_WRITES);
     MP_CLEAR_FLAG(pDevice, fMP_POST_READS);
     pDevice->fKillEventPollingThread = true;
-    del_timer(&pDevice->sTimerCommand);
-    del_timer(&pMgmt->sTimerSecondCallback);
 
-    del_timer(&pDevice->sTimerTxData);
+	cancel_delayed_work_sync(&pDevice->run_command_work);
+	cancel_delayed_work_sync(&pDevice->second_callback_work);
 
     if (pDevice->bDiversityRegCtlON) {
         del_timer(&pDevice->TimerSQ3Tmax1);
         del_timer(&pDevice->TimerSQ3Tmax2);
         del_timer(&pDevice->TimerSQ3Tmax3);
     }
-    tasklet_kill(&pDevice->RxMngWorkItem);
-    tasklet_kill(&pDevice->ReadWorkItem);
+
+	cancel_work_sync(&pDevice->rx_mng_work_item);
+	cancel_work_sync(&pDevice->read_work_item);
+
     tasklet_kill(&pDevice->EventWorkItem);
 
    pDevice->bRoaming = false;
@@ -1105,9 +1108,7 @@
     device_free_int_bufs(pDevice);
     device_free_frag_bufs(pDevice);
 
-	usb_kill_urb(pDevice->pControlURB);
 	usb_kill_urb(pDevice->pInterruptURB);
-    usb_free_urb(pDevice->pControlURB);
     usb_free_urb(pDevice->pInterruptURB);
 
     BSSvClearNodeDBTable(pDevice, 0);
@@ -1131,9 +1132,12 @@
 
 	if (device->dev) {
 		unregister_netdev(device->dev);
+
+		usb_kill_urb(device->pControlURB);
+		usb_free_urb(device->pControlURB);
+
 		free_netdev(device->dev);
 	}
-
 }
 
 static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev)
diff --git a/drivers/staging/vt6656/power.c b/drivers/staging/vt6656/power.c
index edc8975..e7d5487 100644
--- a/drivers/staging/vt6656/power.c
+++ b/drivers/staging/vt6656/power.c
@@ -233,9 +233,8 @@
 	pTxPacket->cbPayloadLen = 0;
 
 	/* log failure if sending failed */
-	if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
+	if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING)
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send PS-Poll packet failed..\n");
-	}
 }
 
 /*
@@ -257,10 +256,8 @@
 	if (pDevice->bLinkPass == false)
 		return false;
 
-	if ((pDevice->bEnablePSMode == false) &&
-		(pDevice->fTxDataInSleep == false)) {
-			return false;
-	}
+	if (pDevice->bEnablePSMode == false && pDevice->tx_trigger == false)
+		return false;
 
 	memset(pMgmt->pbyPSPacketPool, 0, sizeof(struct vnt_tx_mgmt)
 		+ WLAN_NULLDATA_FR_MAXLEN);
@@ -269,7 +266,7 @@
 		+ sizeof(struct vnt_tx_mgmt));
 
 	flags = WLAN_SET_FC_FTYPE(WLAN_TYPE_DATA) |
-                        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_NULL);
+			WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_NULL);
 
 	if (pDevice->bEnablePSMode)
 		flags |= WLAN_SET_FC_PWRMGT(1);
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index 14f3e85..35a3ddb 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -98,21 +98,18 @@
 
 static void *s_vGetFreeContext(struct vnt_private *pDevice);
 
-static void s_vGenerateTxParameter(struct vnt_private *pDevice,
-	u8 byPktType, u16 wCurrentRate,	void *pTxBufHead, void *pvRrvTime,
-	void *rts_cts, u32 cbFrameSize, int bNeedACK, u32 uDMAIdx,
-	struct ethhdr *psEthHeader, bool need_rts);
-
-static u32 s_uFillDataHead(struct vnt_private *pDevice,
-	u8 byPktType, u16 wCurrentRate, void *pTxDataHead, u32 cbFrameLength,
-	u32 uDMAIdx, int bNeedAck, u8 byFBOption);
+static u16 s_vGenerateTxParameter(struct vnt_private *pDevice,
+	u8 byPktType, u16 wCurrentRate,	struct vnt_tx_buffer *tx_buffer,
+	struct vnt_mic_hdr **mic_hdr, u32 need_mic, u32 cbFrameSize,
+	int bNeedACK, u32 uDMAIdx, struct ethhdr *psEthHeader, bool need_rts);
 
 static void s_vGenerateMACHeader(struct vnt_private *pDevice,
 	u8 *pbyBufferAddr, u16 wDuration, struct ethhdr *psEthHeader,
 	int bNeedEncrypt, u16 wFragType, u32 uDMAIdx, u32 uFragIdx);
 
-static void s_vFillTxKey(struct vnt_private *pDevice, u8 *pbyBuf,
-	u8 *pbyIVHead, PSKeyItem pTransmitKey, u8 *pbyHdrBuf, u16 wPayloadLen,
+static void s_vFillTxKey(struct vnt_private *pDevice,
+	struct vnt_tx_fifo_head *fifo_head, u8 *pbyIVHead,
+	PSKeyItem pTransmitKey, u8 *pbyHdrBuf, u16 wPayloadLen,
 	struct vnt_mic_hdr *mic_hdr);
 
 static void s_vSWencryption(struct vnt_private *pDevice,
@@ -124,11 +121,11 @@
 static u16 s_uGetRTSCTSRsvTime(struct vnt_private *pDevice, u8 byRTSRsvType,
 	u8 byPktType, u32 cbFrameLength, u16 wCurrentRate);
 
-static void s_vFillCTSHead(struct vnt_private *pDevice, u32 uDMAIdx,
+static u16 s_vFillCTSHead(struct vnt_private *pDevice, u32 uDMAIdx,
 	u8 byPktType, union vnt_tx_data_head *head, u32 cbFrameLength,
 	int bNeedAck, u16 wCurrentRate, u8 byFBOption);
 
-static void s_vFillRTSHead(struct vnt_private *pDevice, u8 byPktType,
+static u16 s_vFillRTSHead(struct vnt_private *pDevice, u8 byPktType,
 	union vnt_tx_data_head *head, u32 cbFrameLength, int bNeedAck,
 	struct ethhdr *psEthHeader, u16 wCurrentRate, u8 byFBOption);
 
@@ -183,10 +180,12 @@
 	   ETH_ALEN);
 }
 
-static void s_vFillTxKey(struct vnt_private *pDevice, u8 *pbyBuf,
-	u8 *pbyIVHead, PSKeyItem pTransmitKey, u8 *pbyHdrBuf,
-	u16 wPayloadLen, struct vnt_mic_hdr *mic_hdr)
+static void s_vFillTxKey(struct vnt_private *pDevice,
+	struct vnt_tx_fifo_head *fifo_head, u8 *pbyIVHead,
+	PSKeyItem pTransmitKey, u8 *pbyHdrBuf, u16 wPayloadLen,
+	struct vnt_mic_hdr *mic_hdr)
 {
+	u8 *pbyBuf = (u8 *)&fifo_head->adwTxKey[0];
 	u32 *pdwIV = (u32 *)pbyIVHead;
 	u32 *pdwExtIV = (u32 *)((u8 *)pbyIVHead + 4);
 	struct ieee80211_hdr *pMACHeader = (struct ieee80211_hdr *)pbyHdrBuf;
@@ -431,185 +430,114 @@
 {
 	u32 uCTSTime = 0, uDurTime = 0;
 
-    switch (byDurType) {
+	switch (byDurType) {
+	case RTSDUR_BB:
+	case RTSDUR_BA:
+	case RTSDUR_BA_F0:
+	case RTSDUR_BA_F1:
+		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType,
+			14, pDevice->byTopCCKBasicRate);
+		uDurTime = uCTSTime + 2 * pDevice->uSIFS +
+			s_uGetTxRsvTime(pDevice, byPktType,
+						cbFrameLength, wRate, bNeedAck);
+		break;
 
-    case RTSDUR_BB:    //RTSDuration_bb
-        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
-        uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
-        break;
+	case RTSDUR_AA:
+	case RTSDUR_AA_F0:
+	case RTSDUR_AA_F1:
+		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType,
+			14, pDevice->byTopOFDMBasicRate);
+		uDurTime = uCTSTime + 2 * pDevice->uSIFS +
+			s_uGetTxRsvTime(pDevice, byPktType,
+						cbFrameLength, wRate, bNeedAck);
+		break;
 
-    case RTSDUR_BA:    //RTSDuration_ba
-        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
-        uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
-        break;
+	case CTSDUR_BA:
+	case CTSDUR_BA_F0:
+	case CTSDUR_BA_F1:
+		uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice,
+				byPktType, cbFrameLength, wRate, bNeedAck);
+		break;
 
-    case RTSDUR_AA:    //RTSDuration_aa
-        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
-        uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
-        break;
-
-    case CTSDUR_BA:    //CTSDuration_ba
-        uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
-        break;
-
-    case RTSDUR_BA_F0: //RTSDuration_ba_f0
-        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
-        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
-        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
-        }
-        break;
-
-    case RTSDUR_AA_F0: //RTSDuration_aa_f0
-        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
-        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
-        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
-        }
-        break;
-
-    case RTSDUR_BA_F1: //RTSDuration_ba_f1
-        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
-        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
-        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
-        }
-        break;
-
-    case RTSDUR_AA_F1: //RTSDuration_aa_f1
-        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
-        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
-        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
-        }
-        break;
-
-    case CTSDUR_BA_F0: //CTSDuration_ba_f0
-        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
-        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
-        }
-        break;
-
-    case CTSDUR_BA_F1: //CTSDuration_ba_f1
-        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
-        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
-            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
-        }
-        break;
-
-    default:
-        break;
-    }
+	default:
+		break;
+	}
 
 	return cpu_to_le16((u16)uDurTime);
 }
 
-static u32 s_uFillDataHead(struct vnt_private *pDevice,
-	u8 byPktType, u16 wCurrentRate, void *pTxDataHead, u32 cbFrameLength,
-	u32 uDMAIdx, int bNeedAck, u8 byFBOption)
+static u16 vnt_rxtx_datahead_g(struct vnt_private *priv, u8 pkt_type, u16 rate,
+		struct vnt_tx_datahead_g *buf, u32 frame_len, int need_ack)
 {
+	/* Get SignalField,ServiceField,Length */
+	BBvCalculateParameter(priv, frame_len, rate, pkt_type, &buf->a);
+	BBvCalculateParameter(priv, frame_len, priv->byTopCCKBasicRate,
+							PK_TYPE_11B, &buf->b);
 
-    if (pTxDataHead == NULL) {
-        return 0;
-    }
+	/* Get Duration and TimeStamp */
+	buf->wDuration_a = s_uGetDataDuration(priv, pkt_type, need_ack);
+	buf->wDuration_b = s_uGetDataDuration(priv, PK_TYPE_11B, need_ack);
 
-    if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
-            if (byFBOption == AUTO_FB_NONE) {
-		struct vnt_tx_datahead_g *pBuf =
-				(struct vnt_tx_datahead_g *)pTxDataHead;
-                //Get SignalField,ServiceField,Length
-		BBvCalculateParameter(pDevice, cbFrameLength, wCurrentRate,
-			byPktType, &pBuf->a);
-		BBvCalculateParameter(pDevice, cbFrameLength,
-			pDevice->byTopCCKBasicRate, PK_TYPE_11B, &pBuf->b);
-                //Get Duration and TimeStamp
-		pBuf->wDuration_a = s_uGetDataDuration(pDevice,
-							byPktType, bNeedAck);
-		pBuf->wDuration_b = s_uGetDataDuration(pDevice,
-							PK_TYPE_11B, bNeedAck);
+	buf->wTimeStampOff_a = vnt_time_stamp_off(priv, rate);
+	buf->wTimeStampOff_b = vnt_time_stamp_off(priv,
+					priv->byTopCCKBasicRate);
 
-		pBuf->wTimeStampOff_a =	vnt_time_stamp_off(pDevice,
-								wCurrentRate);
-		pBuf->wTimeStampOff_b = vnt_time_stamp_off(pDevice,
-						pDevice->byTopCCKBasicRate);
-                return (pBuf->wDuration_a);
-             } else {
-                // Auto Fallback
-		struct vnt_tx_datahead_g_fb *pBuf =
-			(struct vnt_tx_datahead_g_fb *)pTxDataHead;
-                //Get SignalField,ServiceField,Length
-		BBvCalculateParameter(pDevice, cbFrameLength, wCurrentRate,
-			byPktType, &pBuf->a);
-		BBvCalculateParameter(pDevice, cbFrameLength,
-			pDevice->byTopCCKBasicRate, PK_TYPE_11B, &pBuf->b);
-                //Get Duration and TimeStamp
-		pBuf->wDuration_a = s_uGetDataDuration(pDevice,
-							byPktType, bNeedAck);
-		pBuf->wDuration_b = s_uGetDataDuration(pDevice,
-							PK_TYPE_11B, bNeedAck);
-		pBuf->wDuration_a_f0 = s_uGetDataDuration(pDevice,
-							byPktType, bNeedAck);
-		pBuf->wDuration_a_f1 = s_uGetDataDuration(pDevice,
-							byPktType, bNeedAck);
-		pBuf->wTimeStampOff_a = vnt_time_stamp_off(pDevice,
-								wCurrentRate);
-		pBuf->wTimeStampOff_b = vnt_time_stamp_off(pDevice,
-						pDevice->byTopCCKBasicRate);
-                return (pBuf->wDuration_a);
-            } //if (byFBOption == AUTO_FB_NONE)
-    }
-    else if (byPktType == PK_TYPE_11A) {
-	if (byFBOption != AUTO_FB_NONE) {
-		struct vnt_tx_datahead_a_fb *pBuf =
-			(struct vnt_tx_datahead_a_fb *)pTxDataHead;
-            //Get SignalField,ServiceField,Length
-		BBvCalculateParameter(pDevice, cbFrameLength, wCurrentRate,
-			byPktType, &pBuf->a);
-            //Get Duration and TimeStampOff
-		pBuf->wDuration = s_uGetDataDuration(pDevice,
-					byPktType, bNeedAck);
-		pBuf->wDuration_f0 = s_uGetDataDuration(pDevice,
-					byPktType, bNeedAck);
-		pBuf->wDuration_f1 = s_uGetDataDuration(pDevice,
-							byPktType, bNeedAck);
-		pBuf->wTimeStampOff = vnt_time_stamp_off(pDevice,
-								wCurrentRate);
-            return (pBuf->wDuration);
-        } else {
-		struct vnt_tx_datahead_ab *pBuf =
-			(struct vnt_tx_datahead_ab *)pTxDataHead;
-            //Get SignalField,ServiceField,Length
-		BBvCalculateParameter(pDevice, cbFrameLength, wCurrentRate,
-			byPktType, &pBuf->ab);
-            //Get Duration and TimeStampOff
-		pBuf->wDuration = s_uGetDataDuration(pDevice,
-				byPktType, bNeedAck);
-		pBuf->wTimeStampOff = vnt_time_stamp_off(pDevice,
-								wCurrentRate);
-            return (pBuf->wDuration);
-        }
-    }
-    else if (byPktType == PK_TYPE_11B) {
-		struct vnt_tx_datahead_ab *pBuf =
-			(struct vnt_tx_datahead_ab *)pTxDataHead;
-            //Get SignalField,ServiceField,Length
-		BBvCalculateParameter(pDevice, cbFrameLength, wCurrentRate,
-			byPktType, &pBuf->ab);
-            //Get Duration and TimeStampOff
-		pBuf->wDuration = s_uGetDataDuration(pDevice,
-				byPktType, bNeedAck);
-		pBuf->wTimeStampOff = vnt_time_stamp_off(pDevice,
-								wCurrentRate);
-            return (pBuf->wDuration);
-    }
-    return 0;
+	return buf->wDuration_a;
+}
+
+static u16 vnt_rxtx_datahead_g_fb(struct vnt_private *priv, u8 pkt_type,
+		u16 rate, struct vnt_tx_datahead_g_fb *buf,
+		u32 frame_len, int need_ack)
+{
+	/* Get SignalField,ServiceField,Length */
+	BBvCalculateParameter(priv, frame_len, rate, pkt_type, &buf->a);
+
+	BBvCalculateParameter(priv, frame_len, priv->byTopCCKBasicRate,
+						PK_TYPE_11B, &buf->b);
+
+	/* Get Duration and TimeStamp */
+	buf->wDuration_a = s_uGetDataDuration(priv, pkt_type, need_ack);
+	buf->wDuration_b = s_uGetDataDuration(priv, PK_TYPE_11B, need_ack);
+
+	buf->wDuration_a_f0 = s_uGetDataDuration(priv, pkt_type, need_ack);
+	buf->wDuration_a_f1 = s_uGetDataDuration(priv, pkt_type, need_ack);
+
+	buf->wTimeStampOff_a = vnt_time_stamp_off(priv, rate);
+	buf->wTimeStampOff_b = vnt_time_stamp_off(priv,
+						priv->byTopCCKBasicRate);
+
+	return buf->wDuration_a;
+}
+
+static u16 vnt_rxtx_datahead_a_fb(struct vnt_private *priv, u8 pkt_type,
+		u16 rate, struct vnt_tx_datahead_a_fb *buf,
+		u32 frame_len, int need_ack)
+{
+	/* Get SignalField,ServiceField,Length */
+	BBvCalculateParameter(priv, frame_len, rate, pkt_type, &buf->a);
+	/* Get Duration and TimeStampOff */
+	buf->wDuration = s_uGetDataDuration(priv, pkt_type, need_ack);
+
+	buf->wDuration_f0 = s_uGetDataDuration(priv, pkt_type, need_ack);
+	buf->wDuration_f1 = s_uGetDataDuration(priv, pkt_type, need_ack);
+
+	buf->wTimeStampOff = vnt_time_stamp_off(priv, rate);
+
+	return buf->wDuration;
+}
+
+static u16 vnt_rxtx_datahead_ab(struct vnt_private *priv, u8 pkt_type,
+		u16 rate, struct vnt_tx_datahead_ab *buf,
+		u32 frame_len, int need_ack)
+{
+	/* Get SignalField,ServiceField,Length */
+	BBvCalculateParameter(priv, frame_len, rate, pkt_type, &buf->ab);
+	/* Get Duration and TimeStampOff */
+	buf->wDuration = s_uGetDataDuration(priv, pkt_type, need_ack);
+
+	buf->wTimeStampOff = vnt_time_stamp_off(priv, rate);
+
+	return buf->wDuration;
 }
 
 static int vnt_fill_ieee80211_rts(struct vnt_private *priv,
@@ -632,7 +560,7 @@
 	return 0;
 }
 
-static int vnt_rxtx_rts_g_head(struct vnt_private *priv,
+static u16 vnt_rxtx_rts_g_head(struct vnt_private *priv,
 	struct vnt_rts_g *buf, struct ethhdr *eth_hdr,
 	u8 pkt_type, u32 frame_len, int need_ack,
 	u16 current_rate, u8 fb_option)
@@ -653,10 +581,11 @@
 
 	vnt_fill_ieee80211_rts(priv, &buf->data, eth_hdr, buf->wDuration_aa);
 
-	return 0;
+	return vnt_rxtx_datahead_g(priv, pkt_type, current_rate,
+			&buf->data_head, frame_len, need_ack);
 }
 
-static int vnt_rxtx_rts_g_fb_head(struct vnt_private *priv,
+static u16 vnt_rxtx_rts_g_fb_head(struct vnt_private *priv,
 	struct vnt_rts_g_fb *buf, struct ethhdr *eth_hdr,
 	u8 pkt_type, u32 frame_len, int need_ack,
 	u16 current_rate, u8 fb_option)
@@ -678,20 +607,21 @@
 
 
 	buf->wRTSDuration_ba_f0 = s_uGetRTSCTSDuration(priv, RTSDUR_BA_F0,
-		frame_len, pkt_type, current_rate, need_ack, fb_option);
+		frame_len, pkt_type, priv->tx_rate_fb0, need_ack, fb_option);
 	buf->wRTSDuration_aa_f0 = s_uGetRTSCTSDuration(priv, RTSDUR_AA_F0,
-		frame_len, pkt_type, current_rate, need_ack, fb_option);
+		frame_len, pkt_type, priv->tx_rate_fb0, need_ack, fb_option);
 	buf->wRTSDuration_ba_f1 = s_uGetRTSCTSDuration(priv, RTSDUR_BA_F1,
-		frame_len, pkt_type, current_rate, need_ack, fb_option);
+		frame_len, pkt_type, priv->tx_rate_fb1, need_ack, fb_option);
 	buf->wRTSDuration_aa_f1 = s_uGetRTSCTSDuration(priv, RTSDUR_AA_F1,
-		frame_len, pkt_type, current_rate, need_ack, fb_option);
+		frame_len, pkt_type, priv->tx_rate_fb1, need_ack, fb_option);
 
 	vnt_fill_ieee80211_rts(priv, &buf->data, eth_hdr, buf->wDuration_aa);
 
-	return 0;
+	return vnt_rxtx_datahead_g_fb(priv, pkt_type, current_rate,
+			&buf->data_head, frame_len, need_ack);
 }
 
-static int vnt_rxtx_rts_ab_head(struct vnt_private *priv,
+static u16 vnt_rxtx_rts_ab_head(struct vnt_private *priv,
 	struct vnt_rts_ab *buf, struct ethhdr *eth_hdr,
 	u8 pkt_type, u32 frame_len, int need_ack,
 	u16 current_rate, u8 fb_option)
@@ -706,10 +636,11 @@
 
 	vnt_fill_ieee80211_rts(priv, &buf->data, eth_hdr, buf->wDuration);
 
-	return 0;
+	return vnt_rxtx_datahead_ab(priv, pkt_type, current_rate,
+			&buf->data_head, frame_len, need_ack);
 }
 
-static int vnt_rxtx_rts_a_fb_head(struct vnt_private *priv,
+static u16 vnt_rxtx_rts_a_fb_head(struct vnt_private *priv,
 	struct vnt_rts_a_fb *buf, struct ethhdr *eth_hdr,
 	u8 pkt_type, u32 frame_len, int need_ack,
 	u16 current_rate, u8 fb_option)
@@ -723,23 +654,24 @@
 		pkt_type, current_rate, need_ack, fb_option);
 
 	buf->wRTSDuration_f0 = s_uGetRTSCTSDuration(priv, RTSDUR_AA_F0,
-		frame_len, pkt_type, current_rate, need_ack, fb_option);
+		frame_len, pkt_type, priv->tx_rate_fb0, need_ack, fb_option);
 
 	buf->wRTSDuration_f1 = s_uGetRTSCTSDuration(priv, RTSDUR_AA_F1,
-		frame_len, pkt_type, current_rate, need_ack, fb_option);
+		frame_len, pkt_type, priv->tx_rate_fb1, need_ack, fb_option);
 
 	vnt_fill_ieee80211_rts(priv, &buf->data, eth_hdr, buf->wDuration);
 
-	return 0;
+	return vnt_rxtx_datahead_a_fb(priv, pkt_type, current_rate,
+			&buf->data_head, frame_len, need_ack);
 }
 
-static void s_vFillRTSHead(struct vnt_private *pDevice, u8 byPktType,
+static u16 s_vFillRTSHead(struct vnt_private *pDevice, u8 byPktType,
 	union vnt_tx_data_head *head, u32 cbFrameLength, int bNeedAck,
 	struct ethhdr *psEthHeader, u16 wCurrentRate, u8 byFBOption)
 {
 
 	if (!head)
-		return;
+		return 0;
 
 	/* Note: So far RTSHead doesn't appear in ATIM
 	*	& Beacom DMA, so we don't need to take them
@@ -750,36 +682,38 @@
 	case PK_TYPE_11GB:
 	case PK_TYPE_11GA:
 		if (byFBOption == AUTO_FB_NONE)
-			vnt_rxtx_rts_g_head(pDevice, &head->rts_g,
+			return vnt_rxtx_rts_g_head(pDevice, &head->rts_g,
 				psEthHeader, byPktType, cbFrameLength,
 				bNeedAck, wCurrentRate, byFBOption);
 		else
-			vnt_rxtx_rts_g_fb_head(pDevice, &head->rts_g_fb,
+			return vnt_rxtx_rts_g_fb_head(pDevice, &head->rts_g_fb,
 				psEthHeader, byPktType, cbFrameLength,
 				bNeedAck, wCurrentRate, byFBOption);
 		break;
 	case PK_TYPE_11A:
 		if (byFBOption) {
-			vnt_rxtx_rts_a_fb_head(pDevice, &head->rts_a_fb,
+			return vnt_rxtx_rts_a_fb_head(pDevice, &head->rts_a_fb,
 				psEthHeader, byPktType, cbFrameLength,
 				bNeedAck, wCurrentRate, byFBOption);
 			break;
 		}
 	case PK_TYPE_11B:
-		vnt_rxtx_rts_ab_head(pDevice, &head->rts_ab,
+		return vnt_rxtx_rts_ab_head(pDevice, &head->rts_ab,
 			psEthHeader, byPktType, cbFrameLength,
 			bNeedAck, wCurrentRate, byFBOption);
 	}
+
+	return 0;
 }
 
-static void s_vFillCTSHead(struct vnt_private *pDevice, u32 uDMAIdx,
+static u16 s_vFillCTSHead(struct vnt_private *pDevice, u32 uDMAIdx,
 	u8 byPktType, union vnt_tx_data_head *head, u32 cbFrameLength,
 	int bNeedAck, u16 wCurrentRate, u8 byFBOption)
 {
 	u32 uCTSFrameLen = 14;
 
 	if (!head)
-		return;
+		return 0;
 
 	if (byFBOption != AUTO_FB_NONE) {
 		/* Auto Fall back */
@@ -792,16 +726,19 @@
 			wCurrentRate, bNeedAck, byFBOption);
 		/* Get CTSDuration_ba_f0 */
 		pBuf->wCTSDuration_ba_f0 = s_uGetRTSCTSDuration(pDevice,
-			CTSDUR_BA_F0, cbFrameLength, byPktType, wCurrentRate,
-			bNeedAck, byFBOption);
+			CTSDUR_BA_F0, cbFrameLength, byPktType,
+			pDevice->tx_rate_fb0, bNeedAck, byFBOption);
 		/* Get CTSDuration_ba_f1 */
 		pBuf->wCTSDuration_ba_f1 = s_uGetRTSCTSDuration(pDevice,
-			CTSDUR_BA_F1, cbFrameLength, byPktType, wCurrentRate,
-			bNeedAck, byFBOption);
+			CTSDUR_BA_F1, cbFrameLength, byPktType,
+			pDevice->tx_rate_fb1, bNeedAck, byFBOption);
 		/* Get CTS Frame body */
 		pBuf->data.duration = pBuf->wDuration_ba;
 		pBuf->data.frame_control = TYPE_CTL_CTS;
 		memcpy(pBuf->data.ra, pDevice->abyCurrentNetAddr, ETH_ALEN);
+
+		return vnt_rxtx_datahead_g_fb(pDevice, byPktType, wCurrentRate,
+				&pBuf->data_head, cbFrameLength, bNeedAck);
 	} else {
 		struct vnt_cts *pBuf = &head->cts_g;
 		/* Get SignalField,ServiceField,Length */
@@ -815,7 +752,12 @@
 		pBuf->data.duration = pBuf->wDuration_ba;
 		pBuf->data.frame_control = TYPE_CTL_CTS;
 		memcpy(pBuf->data.ra, pDevice->abyCurrentNetAddr, ETH_ALEN);
+
+		return vnt_rxtx_datahead_g(pDevice, byPktType, wCurrentRate,
+				&pBuf->data_head, cbFrameLength, bNeedAck);
         }
+
+	return 0;
 }
 
 /*+
@@ -841,112 +783,160 @@
  *
 -*/
 
-static void s_vGenerateTxParameter(struct vnt_private *pDevice,
-	u8 byPktType, u16 wCurrentRate,	void *pTxBufHead, void *pvRrvTime,
-	void *rts_cts, u32 cbFrameSize, int bNeedACK, u32 uDMAIdx,
-	struct ethhdr *psEthHeader, bool need_rts)
+static u16 s_vGenerateTxParameter(struct vnt_private *pDevice,
+	u8 byPktType, u16 wCurrentRate,	struct vnt_tx_buffer *tx_buffer,
+	struct vnt_mic_hdr **mic_hdr, u32 need_mic, u32 cbFrameSize,
+	int bNeedACK, u32 uDMAIdx, struct ethhdr *psEthHeader, bool need_rts)
 {
-	union vnt_tx_data_head *head = rts_cts;
+	struct vnt_tx_fifo_head *pFifoHead = &tx_buffer->fifo_head;
+	union vnt_tx_data_head *head = NULL;
 	u32 cbMACHdLen = WLAN_HDR_ADDR3_LEN; /* 24 */
 	u16 wFifoCtl;
 	u8 byFBOption = AUTO_FB_NONE;
 
-    //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vGenerateTxParameter...\n");
-    PSTxBufHead pFifoHead = (PSTxBufHead)pTxBufHead;
-    pFifoHead->wReserved = wCurrentRate;
-    wFifoCtl = pFifoHead->wFIFOCtl;
+	pFifoHead->wReserved = wCurrentRate;
+	wFifoCtl = pFifoHead->wFIFOCtl;
 
-    if (wFifoCtl & FIFOCTL_AUTO_FB_0) {
-        byFBOption = AUTO_FB_0;
-    }
-    else if (wFifoCtl & FIFOCTL_AUTO_FB_1) {
-        byFBOption = AUTO_FB_1;
-    }
+	if (wFifoCtl & FIFOCTL_AUTO_FB_0)
+		byFBOption = AUTO_FB_0;
+	else if (wFifoCtl & FIFOCTL_AUTO_FB_1)
+		byFBOption = AUTO_FB_1;
 
-	if (!pvRrvTime)
-		return;
+	if (!pFifoHead)
+		return 0;
 
-    if (pDevice->bLongHeader)
-        cbMACHdLen = WLAN_HDR_ADDR3_LEN + 6;
+	if (pDevice->bLongHeader)
+		cbMACHdLen = WLAN_HDR_ADDR3_LEN + 6;
 
-    if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
-	if (need_rts) {
-            //Fill RsvTime
-		struct vnt_rrv_time_rts *pBuf =
-			(struct vnt_rrv_time_rts *)pvRrvTime;
-		pBuf->wRTSTxRrvTime_aa = s_uGetRTSCTSRsvTime(pDevice, 2,
+	if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
+		if (need_rts) {
+			struct vnt_rrv_time_rts *pBuf =
+					&tx_buffer->tx_head.tx_rts.rts;
+
+			pBuf->wRTSTxRrvTime_aa = s_uGetRTSCTSRsvTime(pDevice, 2,
+					byPktType, cbFrameSize, wCurrentRate);
+			pBuf->wRTSTxRrvTime_ba = s_uGetRTSCTSRsvTime(pDevice, 1,
+					byPktType, cbFrameSize, wCurrentRate);
+			pBuf->wRTSTxRrvTime_bb = s_uGetRTSCTSRsvTime(pDevice, 0,
 				byPktType, cbFrameSize, wCurrentRate);
-		pBuf->wRTSTxRrvTime_ba = s_uGetRTSCTSRsvTime(pDevice, 1,
+
+			pBuf->wTxRrvTime_a = vnt_rxtx_rsvtime_le16(pDevice,
+				byPktType, cbFrameSize, wCurrentRate, bNeedACK);
+			pBuf->wTxRrvTime_b = vnt_rxtx_rsvtime_le16(pDevice,
+					PK_TYPE_11B, cbFrameSize,
+					pDevice->byTopCCKBasicRate, bNeedACK);
+
+			if (need_mic) {
+				*mic_hdr = &tx_buffer->
+						tx_head.tx_rts.tx.mic.hdr;
+				head = &tx_buffer->tx_head.tx_rts.tx.mic.head;
+			} else {
+				head = &tx_buffer->tx_head.tx_rts.tx.head;
+			}
+
+			/* Fill RTS */
+			return s_vFillRTSHead(pDevice, byPktType, head,
+					cbFrameSize, bNeedACK, psEthHeader,
+						wCurrentRate, byFBOption);
+
+		} else {
+			struct vnt_rrv_time_cts *pBuf = &tx_buffer->
+							tx_head.tx_cts.cts;
+
+			pBuf->wTxRrvTime_a = vnt_rxtx_rsvtime_le16(pDevice,
+				byPktType, cbFrameSize, wCurrentRate, bNeedACK);
+			pBuf->wTxRrvTime_b = vnt_rxtx_rsvtime_le16(pDevice,
+				PK_TYPE_11B, cbFrameSize,
+					pDevice->byTopCCKBasicRate, bNeedACK);
+
+			pBuf->wCTSTxRrvTime_ba = s_uGetRTSCTSRsvTime(pDevice, 3,
+					byPktType, cbFrameSize, wCurrentRate);
+
+			if (need_mic) {
+				*mic_hdr = &tx_buffer->
+						tx_head.tx_cts.tx.mic.hdr;
+				head = &tx_buffer->tx_head.tx_cts.tx.mic.head;
+			} else {
+				head = &tx_buffer->tx_head.tx_cts.tx.head;
+			}
+
+			/* Fill CTS */
+			return s_vFillCTSHead(pDevice, uDMAIdx, byPktType,
+				head, cbFrameSize, bNeedACK, wCurrentRate,
+					byFBOption);
+		}
+	} else if (byPktType == PK_TYPE_11A) {
+		if (need_mic) {
+			*mic_hdr = &tx_buffer->tx_head.tx_ab.tx.mic.hdr;
+			head = &tx_buffer->tx_head.tx_ab.tx.mic.head;
+		} else {
+			head = &tx_buffer->tx_head.tx_ab.tx.head;
+		}
+
+		if (need_rts) {
+			struct vnt_rrv_time_ab *pBuf = &tx_buffer->
+							tx_head.tx_ab.ab;
+
+			pBuf->wRTSTxRrvTime = s_uGetRTSCTSRsvTime(pDevice, 2,
 				byPktType, cbFrameSize, wCurrentRate);
-		pBuf->wRTSTxRrvTime_bb = s_uGetRTSCTSRsvTime(pDevice, 0,
+
+			pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice,
+				byPktType, cbFrameSize, wCurrentRate, bNeedACK);
+
+			/* Fill RTS */
+			return s_vFillRTSHead(pDevice, byPktType, head,
+				cbFrameSize, bNeedACK, psEthHeader,
+					wCurrentRate, byFBOption);
+		} else {
+			struct vnt_rrv_time_ab *pBuf = &tx_buffer->
+							tx_head.tx_ab.ab;
+
+			pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice,
+				PK_TYPE_11A, cbFrameSize,
+					wCurrentRate, bNeedACK);
+
+			return vnt_rxtx_datahead_a_fb(pDevice, byPktType,
+				wCurrentRate, &head->data_head_a_fb,
+						cbFrameSize, bNeedACK);
+		}
+	} else if (byPktType == PK_TYPE_11B) {
+		if (need_mic) {
+			*mic_hdr = &tx_buffer->tx_head.tx_ab.tx.mic.hdr;
+			head = &tx_buffer->tx_head.tx_ab.tx.mic.head;
+		} else {
+			head = &tx_buffer->tx_head.tx_ab.tx.head;
+		}
+
+		if (need_rts) {
+			struct vnt_rrv_time_ab *pBuf = &tx_buffer->
+							tx_head.tx_ab.ab;
+
+			pBuf->wRTSTxRrvTime = s_uGetRTSCTSRsvTime(pDevice, 0,
 				byPktType, cbFrameSize, wCurrentRate);
-		pBuf->wTxRrvTime_a = vnt_rxtx_rsvtime_le16(pDevice,
-			byPktType, cbFrameSize, wCurrentRate, bNeedACK);
-		pBuf->wTxRrvTime_b = vnt_rxtx_rsvtime_le16(pDevice,
-			PK_TYPE_11B, cbFrameSize, pDevice->byTopCCKBasicRate,
-				bNeedACK);
-		/* Fill RTS */
-		s_vFillRTSHead(pDevice, byPktType, head, cbFrameSize,
+
+			pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice,
+				PK_TYPE_11B, cbFrameSize, wCurrentRate,
+								bNeedACK);
+
+			/* Fill RTS */
+			return s_vFillRTSHead(pDevice, byPktType, head,
+				cbFrameSize,
 			bNeedACK, psEthHeader, wCurrentRate, byFBOption);
-        }
-        else {//RTS_needless, PCF mode
-            //Fill RsvTime
-		struct vnt_rrv_time_cts *pBuf =
-				(struct vnt_rrv_time_cts *)pvRrvTime;
-		pBuf->wTxRrvTime_a = vnt_rxtx_rsvtime_le16(pDevice, byPktType,
-			cbFrameSize, wCurrentRate, bNeedACK);
-		pBuf->wTxRrvTime_b = vnt_rxtx_rsvtime_le16(pDevice,
-			PK_TYPE_11B, cbFrameSize,
-			pDevice->byTopCCKBasicRate, bNeedACK);
-		pBuf->wCTSTxRrvTime_ba = s_uGetRTSCTSRsvTime(pDevice, 3,
-				byPktType, cbFrameSize, wCurrentRate);
-		/* Fill CTS */
-		s_vFillCTSHead(pDevice, uDMAIdx, byPktType, head,
-			cbFrameSize, bNeedACK, wCurrentRate, byFBOption);
-        }
-    }
-    else if (byPktType == PK_TYPE_11A) {
-	if (need_rts) {
-            //Fill RsvTime
-		struct vnt_rrv_time_ab *pBuf =
-				(struct vnt_rrv_time_ab *)pvRrvTime;
-		pBuf->wRTSTxRrvTime = s_uGetRTSCTSRsvTime(pDevice, 2,
-				byPktType, cbFrameSize, wCurrentRate);
-		pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice, byPktType,
-				cbFrameSize, wCurrentRate, bNeedACK);
-		/* Fill RTS */
-		s_vFillRTSHead(pDevice, byPktType, head, cbFrameSize,
-			bNeedACK, psEthHeader, wCurrentRate, byFBOption);
-	} else {
-            //Fill RsvTime
-		struct vnt_rrv_time_ab *pBuf =
-				(struct vnt_rrv_time_ab *)pvRrvTime;
-		pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice, PK_TYPE_11A,
-			cbFrameSize, wCurrentRate, bNeedACK);
-        }
-    }
-    else if (byPktType == PK_TYPE_11B) {
-	if (need_rts) {
-            //Fill RsvTime
-		struct vnt_rrv_time_ab *pBuf =
-				(struct vnt_rrv_time_ab *)pvRrvTime;
-		pBuf->wRTSTxRrvTime = s_uGetRTSCTSRsvTime(pDevice, 0,
-				byPktType, cbFrameSize, wCurrentRate);
-		pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice, PK_TYPE_11B,
-				cbFrameSize, wCurrentRate, bNeedACK);
-		/* Fill RTS */
-		s_vFillRTSHead(pDevice, byPktType, head, cbFrameSize,
-			bNeedACK, psEthHeader, wCurrentRate, byFBOption);
-        }
-        else { //RTS_needless, non PCF mode
-            //Fill RsvTime
-		struct vnt_rrv_time_ab *pBuf =
-				(struct vnt_rrv_time_ab *)pvRrvTime;
-		pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice, PK_TYPE_11B,
-			cbFrameSize, wCurrentRate, bNeedACK);
-        }
-    }
-    //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vGenerateTxParameter END.\n");
+		} else {
+			struct vnt_rrv_time_ab *pBuf = &tx_buffer->
+							tx_head.tx_ab.ab;
+
+			pBuf->wTxRrvTime = vnt_rxtx_rsvtime_le16(pDevice,
+				PK_TYPE_11B, cbFrameSize,
+					wCurrentRate, bNeedACK);
+
+			return vnt_rxtx_datahead_ab(pDevice, byPktType,
+				wCurrentRate, &head->data_head_ab,
+					cbFrameSize, bNeedACK);
+		}
+	}
+
+	return 0;
 }
 /*
     u8 * pbyBuffer,//point to pTxBufHead
@@ -955,11 +945,12 @@
 */
 
 static int s_bPacketToWirelessUsb(struct vnt_private *pDevice, u8 byPktType,
-	struct vnt_tx_buffer *pTxBufHead, int bNeedEncryption,
+	struct vnt_tx_buffer *tx_buffer, int bNeedEncryption,
 	u32 uSkbPacketLen, u32 uDMAIdx,	struct ethhdr *psEthHeader,
 	u8 *pPacket, PSKeyItem pTransmitKey, u32 uNodeIndex, u16 wCurrentRate,
 	u32 *pcbHeaderLen, u32 *pcbTotalLen)
 {
+	struct vnt_tx_fifo_head *pTxBufHead = &tx_buffer->fifo_head;
 	struct vnt_manager *pMgmt = &pDevice->vnt_mgmt;
 	u32 cbFrameSize, cbFrameBodySize;
 	u32 cb802_1_H_len;
@@ -973,17 +964,14 @@
 		= {0xAA, 0xAA, 0x03, 0x00, 0x00, 0xF8};
 	u32 uDuration;
 	u32 cbHeaderLength = 0, uPadding = 0;
-	void *pvRrvTime;
 	struct vnt_mic_hdr *pMICHDR;
-	void *rts_cts = NULL;
-	void *pvTxDataHd;
 	u8 byFBOption = AUTO_FB_NONE, byFragType;
 	u16 wTxBufSize;
 	u32 dwMICKey0, dwMICKey1, dwMIC_Priority;
 	u32 *pdwMIC_L, *pdwMIC_R;
 	int bSoftWEP = false;
 
-	pvRrvTime = pMICHDR = pvTxDataHd = NULL;
+	pMICHDR = NULL;
 
 	if (bNeedEncryption && pTransmitKey->pvKeyTable) {
 		if (((PSKeyTable)pTransmitKey->pvKeyTable)->bSoftWEP == true)
@@ -1047,16 +1035,27 @@
         pTxBufHead->wFIFOCtl |=	FIFOCTL_GRPACK;
     }
 
-    //Set Auto Fallback Ctl
-    if (wCurrentRate >= RATE_18M) {
-        if (pDevice->byAutoFBCtrl == AUTO_FB_0) {
-            pTxBufHead->wFIFOCtl |= FIFOCTL_AUTO_FB_0;
-            byFBOption = AUTO_FB_0;
-        } else if (pDevice->byAutoFBCtrl == AUTO_FB_1) {
-            pTxBufHead->wFIFOCtl |= FIFOCTL_AUTO_FB_1;
-            byFBOption = AUTO_FB_1;
-        }
-    }
+	/* Set Auto Fallback Ctl */
+	if (wCurrentRate >= RATE_18M) {
+		if (pDevice->byAutoFBCtrl == AUTO_FB_0) {
+			pTxBufHead->wFIFOCtl |= FIFOCTL_AUTO_FB_0;
+
+			pDevice->tx_rate_fb0 =
+				wFB_Opt0[FB_RATE0][wCurrentRate - RATE_18M];
+			pDevice->tx_rate_fb1 =
+				wFB_Opt0[FB_RATE1][wCurrentRate - RATE_18M];
+
+			byFBOption = AUTO_FB_0;
+		} else if (pDevice->byAutoFBCtrl == AUTO_FB_1) {
+			pTxBufHead->wFIFOCtl |= FIFOCTL_AUTO_FB_1;
+			pDevice->tx_rate_fb0 =
+				wFB_Opt1[FB_RATE0][wCurrentRate - RATE_18M];
+			pDevice->tx_rate_fb1 =
+				wFB_Opt1[FB_RATE1][wCurrentRate - RATE_18M];
+
+			byFBOption = AUTO_FB_1;
+		}
+	}
 
     if (bSoftWEP != true) {
         if ((bNeedEncryption) && (pTransmitKey != NULL))  { //WEP enabled
@@ -1105,118 +1104,47 @@
     }
 
     pbyTxBufferAddr = (u8 *) &(pTxBufHead->adwTxKey[0]);
-    wTxBufSize = sizeof(STxBufHead);
+	wTxBufSize = sizeof(struct vnt_tx_fifo_head);
+
     if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {//802.11g packet
         if (byFBOption == AUTO_FB_NONE) {
             if (bRTS == true) {//RTS_need
-		pvRrvTime = (struct vnt_rrv_time_rts *)
-					(pbyTxBufferAddr + wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *)(pbyTxBufferAddr + wTxBufSize +
-					sizeof(struct vnt_rrv_time_rts));
-		rts_cts = (struct vnt_rts_g *) (pbyTxBufferAddr + wTxBufSize +
-				sizeof(struct vnt_rrv_time_rts) + cbMICHDR);
-		pvTxDataHd = (struct vnt_tx_datahead_g *) (pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_rts) +
-				cbMICHDR + sizeof(struct vnt_rts_g));
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_rts) +
-			cbMICHDR + sizeof(struct vnt_rts_g) +
-				sizeof(struct vnt_tx_datahead_g);
+			cbMICHDR + sizeof(struct vnt_rts_g);
             }
             else { //RTS_needless
-		pvRrvTime = (struct vnt_rrv_time_cts *)
-				(pbyTxBufferAddr + wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *) (pbyTxBufferAddr + wTxBufSize +
-			sizeof(struct vnt_rrv_time_cts));
-		rts_cts = (struct vnt_cts *) (pbyTxBufferAddr + wTxBufSize +
-				sizeof(struct vnt_rrv_time_cts) + cbMICHDR);
-		pvTxDataHd = (struct vnt_tx_datahead_g *)(pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_cts) +
-				cbMICHDR + sizeof(struct vnt_cts));
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_cts) +
-			cbMICHDR + sizeof(struct vnt_cts) +
-				sizeof(struct vnt_tx_datahead_g);
+			cbMICHDR + sizeof(struct vnt_cts);
             }
         } else {
             // Auto Fall Back
             if (bRTS == true) {//RTS_need
-		pvRrvTime = (struct vnt_rrv_time_rts *)(pbyTxBufferAddr +
-								wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *) (pbyTxBufferAddr + wTxBufSize +
-					sizeof(struct vnt_rrv_time_rts));
-		rts_cts = (struct vnt_rts_g_fb *)(pbyTxBufferAddr + wTxBufSize +
-				sizeof(struct vnt_rrv_time_rts) + cbMICHDR);
-		pvTxDataHd = (struct vnt_tx_datahead_g_fb *) (pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_rts) +
-				cbMICHDR + sizeof(struct vnt_rts_g_fb));
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_rts) +
-			cbMICHDR + sizeof(struct vnt_rts_g_fb) +
-				sizeof(struct vnt_tx_datahead_g_fb);
+			cbMICHDR + sizeof(struct vnt_rts_g_fb);
             }
             else if (bRTS == false) { //RTS_needless
-		pvRrvTime = (struct vnt_rrv_time_cts *)
-				(pbyTxBufferAddr + wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *) (pbyTxBufferAddr + wTxBufSize +
-				sizeof(struct vnt_rrv_time_cts));
-		rts_cts = (struct vnt_cts_fb *) (pbyTxBufferAddr + wTxBufSize +
-			sizeof(struct vnt_rrv_time_cts) + cbMICHDR);
-		pvTxDataHd = (struct vnt_tx_datahead_g_fb *) (pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_cts) +
-				cbMICHDR + sizeof(struct vnt_cts_fb));
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_cts) +
-				cbMICHDR + sizeof(struct vnt_cts_fb) +
-					sizeof(struct vnt_tx_datahead_g_fb);
+				cbMICHDR + sizeof(struct vnt_cts_fb);
             }
         } // Auto Fall Back
     }
     else {//802.11a/b packet
         if (byFBOption == AUTO_FB_NONE) {
             if (bRTS == true) {//RTS_need
-		pvRrvTime = (struct vnt_rrv_time_ab *) (pbyTxBufferAddr +
-								wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *)(pbyTxBufferAddr + wTxBufSize +
-						sizeof(struct vnt_rrv_time_ab));
-		rts_cts = (struct vnt_rts_ab *) (pbyTxBufferAddr + wTxBufSize +
-				sizeof(struct vnt_rrv_time_ab) + cbMICHDR);
-		pvTxDataHd = (struct vnt_tx_datahead_ab *)(pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_ab) + cbMICHDR +
-						sizeof(struct vnt_rts_ab));
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_ab) +
-			cbMICHDR + sizeof(struct vnt_rts_ab) +
-				sizeof(struct vnt_tx_datahead_ab);
+			cbMICHDR + sizeof(struct vnt_rts_ab);
             }
             else if (bRTS == false) { //RTS_needless, no MICHDR
-		pvRrvTime = (struct vnt_rrv_time_ab *)(pbyTxBufferAddr +
-								wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *) (pbyTxBufferAddr + wTxBufSize +
-						sizeof(struct vnt_rrv_time_ab));
-		pvTxDataHd = (struct vnt_tx_datahead_ab *)(pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_ab) + cbMICHDR);
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_ab) +
 				cbMICHDR + sizeof(struct vnt_tx_datahead_ab);
             }
         } else {
             // Auto Fall Back
             if (bRTS == true) {//RTS_need
-		pvRrvTime = (struct vnt_rrv_time_ab *)(pbyTxBufferAddr +
-						wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *) (pbyTxBufferAddr + wTxBufSize +
-			sizeof(struct vnt_rrv_time_ab));
-		rts_cts = (struct vnt_rts_a_fb *)(pbyTxBufferAddr + wTxBufSize +
-				sizeof(struct vnt_rrv_time_ab) + cbMICHDR);
-		pvTxDataHd = (struct vnt_tx_datahead_a_fb *)(pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_ab) + cbMICHDR +
-					sizeof(struct vnt_rts_a_fb));
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_ab) +
-			cbMICHDR + sizeof(struct vnt_rts_a_fb) +
-					sizeof(struct vnt_tx_datahead_a_fb);
+			cbMICHDR + sizeof(struct vnt_rts_a_fb);
             }
             else if (bRTS == false) { //RTS_needless
-		pvRrvTime = (struct vnt_rrv_time_ab *)(pbyTxBufferAddr +
-								wTxBufSize);
-		pMICHDR = (struct vnt_mic_hdr *)(pbyTxBufferAddr + wTxBufSize +
-						sizeof(struct vnt_rrv_time_ab));
-		pvTxDataHd = (struct vnt_tx_datahead_a_fb *)(pbyTxBufferAddr +
-			wTxBufSize + sizeof(struct vnt_rrv_time_ab) + cbMICHDR);
 		cbHeaderLength = wTxBufSize + sizeof(struct vnt_rrv_time_ab) +
 			cbMICHDR + sizeof(struct vnt_tx_datahead_a_fb);
             }
@@ -1235,20 +1163,18 @@
     //uDMAIdx = TYPE_AC0DMA;
     //pTxBufHead = (PSTxBufHead) &(pTxBufHead->adwTxKey[0]);
 
-    //Fill FIFO,RrvTime,RTS,and CTS
-    s_vGenerateTxParameter(pDevice, byPktType, wCurrentRate,
-		(void *)pbyTxBufferAddr, pvRrvTime, rts_cts,
-		cbFrameSize, bNeedACK, uDMAIdx, psEthHeader, bRTS);
-    //Fill DataHead
-    uDuration = s_uFillDataHead(pDevice, byPktType, wCurrentRate, pvTxDataHd, cbFrameSize, uDMAIdx, bNeedACK,
-				byFBOption);
+	/* Fill FIFO, RrvTime, RTS and CTS */
+	uDuration = s_vGenerateTxParameter(pDevice, byPktType, wCurrentRate,
+			tx_buffer, &pMICHDR, cbMICHDR,
+			cbFrameSize, bNeedACK, uDMAIdx, psEthHeader, bRTS);
+
     // Generate TX MAC Header
     s_vGenerateMACHeader(pDevice, pbyMacHdr, (u16)uDuration, psEthHeader, bNeedEncryption,
                            byFragType, uDMAIdx, 0);
 
     if (bNeedEncryption == true) {
         //Fill TXKEY
-        s_vFillTxKey(pDevice, (u8 *)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
+	s_vFillTxKey(pDevice, pTxBufHead, pbyIVHead, pTransmitKey,
 		pbyMacHdr, (u16)cbFrameBodySize, pMICHDR);
 
         if (pDevice->bEnableHostWEP) {
@@ -1469,13 +1395,12 @@
 {
 	struct vnt_manager *pMgmt = &pDevice->vnt_mgmt;
 	struct vnt_tx_buffer *pTX_Buffer;
-	PSTxBufHead pTxBufHead;
 	struct vnt_usb_send_context *pContext;
+	struct vnt_tx_fifo_head *pTxBufHead;
 	struct ieee80211_hdr *pMACHeader;
 	struct ethhdr sEthHeader;
 	u8 byPktType, *pbyTxBufferAddr;
-	void *rts_cts = NULL;
-	void *pvTxDataHd, *pvRrvTime, *pMICHDR;
+	struct vnt_mic_hdr *pMICHDR = NULL;
 	u32 uDuration, cbReqCount, cbHeaderSize, cbFrameBodySize, cbFrameSize;
 	int bNeedACK, bIsPSPOLL = false;
 	u32 cbIVlen = 0, cbICVlen = 0, cbMIClen = 0, cbFCSlen = 4;
@@ -1492,10 +1417,10 @@
     }
 
 	pTX_Buffer = (struct vnt_tx_buffer *)&pContext->Data[0];
-    pbyTxBufferAddr = (u8 *)&(pTX_Buffer->adwTxKey[0]);
     cbFrameBodySize = pPacket->cbPayloadLen;
-    pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
-    wTxBufSize = sizeof(STxBufHead);
+	pTxBufHead = &pTX_Buffer->fifo_head;
+	pbyTxBufferAddr = (u8 *)&pTxBufHead->adwTxKey[0];
+	wTxBufSize = sizeof(struct vnt_tx_fifo_head);
 
     if (pDevice->byBBType == BB_TYPE_11A) {
         wCurrentRate = RATE_6M;
@@ -1607,21 +1532,10 @@
 
     //Set RrvTime/RTS/CTS Buffer
     if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {//802.11g packet
-
-	pvRrvTime = (struct vnt_rrv_time_cts *) (pbyTxBufferAddr + wTxBufSize);
-        pMICHDR = NULL;
-	rts_cts = (struct vnt_cts *) (pbyTxBufferAddr + wTxBufSize +
-					sizeof(struct vnt_rrv_time_cts));
-	pvTxDataHd = (struct vnt_tx_datahead_g *)(pbyTxBufferAddr + wTxBufSize +
-		sizeof(struct vnt_rrv_time_cts) + sizeof(struct vnt_cts));
 	cbHeaderSize = wTxBufSize + sizeof(struct vnt_rrv_time_cts) +
-		sizeof(struct vnt_cts) + sizeof(struct vnt_tx_datahead_g);
+		sizeof(struct vnt_cts);
     }
     else { // 802.11a/b packet
-	pvRrvTime = (struct vnt_rrv_time_ab *) (pbyTxBufferAddr + wTxBufSize);
-        pMICHDR = NULL;
-	pvTxDataHd = (struct vnt_tx_datahead_ab *) (pbyTxBufferAddr +
-		wTxBufSize + sizeof(struct vnt_rrv_time_ab));
 	cbHeaderSize = wTxBufSize + sizeof(struct vnt_rrv_time_ab) +
 		sizeof(struct vnt_tx_datahead_ab);
     }
@@ -1638,14 +1552,10 @@
     pTxBufHead->wFragCtl |= (u16)FRAGCTL_NONFRAG;
 
 	/* Fill FIFO,RrvTime,RTS,and CTS */
-	s_vGenerateTxParameter(pDevice, byPktType, wCurrentRate,
-		pbyTxBufferAddr, pvRrvTime, rts_cts,
+	uDuration = s_vGenerateTxParameter(pDevice, byPktType, wCurrentRate,
+		pTX_Buffer, &pMICHDR, 0,
 		cbFrameSize, bNeedACK, TYPE_TXDMA0, &sEthHeader, false);
 
-    //Fill DataHead
-    uDuration = s_uFillDataHead(pDevice, byPktType, wCurrentRate, pvTxDataHd, cbFrameSize, TYPE_TXDMA0, bNeedACK,
-				AUTO_FB_NONE);
-
     pMACHeader = (struct ieee80211_hdr *) (pbyTxBufferAddr + cbHeaderSize);
 
     cbReqCount = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen + cbFrameBodySize;
@@ -1684,7 +1594,7 @@
             }
         } while(false);
         //Fill TXKEY
-        s_vFillTxKey(pDevice, (u8 *)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
+	s_vFillTxKey(pDevice, pTxBufHead, pbyIVHead, pTransmitKey,
                      (u8 *)pMACHeader, (u16)cbFrameBodySize, NULL);
 
         memcpy(pMACHeader, pPacket->p80211Header, cbMacHdLen);
@@ -1708,12 +1618,16 @@
         // in the same place of other packet's Duration-field).
         // And it will cause Cisco-AP to issue Disassociation-packet
 	if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
-		((struct vnt_tx_datahead_g *)pvTxDataHd)->wDuration_a =
+		struct vnt_tx_datahead_g *data_head = &pTX_Buffer->tx_head.
+						tx_cts.tx.head.cts_g.data_head;
+		data_head->wDuration_a =
 			cpu_to_le16(pPacket->p80211Header->sA2.wDurationID);
-		((struct vnt_tx_datahead_g *)pvTxDataHd)->wDuration_b =
+		data_head->wDuration_b =
 			cpu_to_le16(pPacket->p80211Header->sA2.wDurationID);
 	} else {
-		((struct vnt_tx_datahead_ab *)pvTxDataHd)->wDuration =
+		struct vnt_tx_datahead_ab *data_head = &pTX_Buffer->tx_head.
+					tx_ab.tx.head.data_head_ab;
+		data_head->wDuration =
 			cpu_to_le16(pPacket->p80211Header->sA2.wDurationID);
 	}
     }
@@ -1727,10 +1641,14 @@
     pContext->uBufLen = (u16)cbReqCount + 4;  //USB header
 
     if (WLAN_GET_FC_TODS(pMACHeader->frame_control) == 0) {
-        s_vSaveTxPktInfo(pDevice, (u8) (pTX_Buffer->byPKTNO & 0x0F), &(pMACHeader->addr1[0]), (u16)cbFrameSize, pTX_Buffer->wFIFOCtl);
+	s_vSaveTxPktInfo(pDevice, (u8)(pTX_Buffer->byPKTNO & 0x0F),
+			&pMACHeader->addr1[0], (u16)cbFrameSize,
+			pTxBufHead->wFIFOCtl);
     }
     else {
-        s_vSaveTxPktInfo(pDevice, (u8) (pTX_Buffer->byPKTNO & 0x0F), &(pMACHeader->addr3[0]), (u16)cbFrameSize, pTX_Buffer->wFIFOCtl);
+	s_vSaveTxPktInfo(pDevice, (u8)(pTX_Buffer->byPKTNO & 0x0F),
+			&pMACHeader->addr3[0], (u16)cbFrameSize,
+			pTxBufHead->wFIFOCtl);
     }
 
     PIPEnsSendBulkOut(pDevice,pContext);
@@ -1825,15 +1743,13 @@
 {
 	struct vnt_manager *pMgmt = &pDevice->vnt_mgmt;
 	struct vnt_tx_buffer *pTX_Buffer;
+	struct vnt_tx_fifo_head *pTxBufHead;
 	u8 byPktType;
 	u8 *pbyTxBufferAddr;
-	void *rts_cts = NULL;
-	void *pvTxDataHd;
 	u32 uDuration, cbReqCount;
 	struct ieee80211_hdr *pMACHeader;
 	u32 cbHeaderSize, cbFrameBodySize;
 	int bNeedACK, bIsPSPOLL = false;
-	PSTxBufHead pTxBufHead;
 	u32 cbFrameSize;
 	u32 cbIVlen = 0, cbICVlen = 0, cbMIClen = 0, cbFCSlen = 4;
 	u32 uPadding = 0;
@@ -1844,7 +1760,7 @@
 	u16 wTxBufSize;
 	u32 cbMacHdLen;
 	struct ethhdr sEthHeader;
-	void *pvRrvTime, *pMICHDR;
+	struct vnt_mic_hdr *pMICHDR;
 	u32 wCurrentRate = RATE_1M;
 	PUWLAN_80211HDR  p80211Header;
 	u32 uNodeIndex = 0;
@@ -1855,7 +1771,7 @@
 	u32 cbExtSuppRate = 0;
 	struct vnt_usb_send_context *pContext;
 
-	pvRrvTime = pMICHDR = pvTxDataHd = NULL;
+	pMICHDR = NULL;
 
     if(skb->len <= WLAN_HDR_ADDR3_LEN) {
        cbFrameBodySize = 0;
@@ -1874,9 +1790,9 @@
     }
 
 	pTX_Buffer = (struct vnt_tx_buffer *)&pContext->Data[0];
-    pbyTxBufferAddr = (u8 *)(&pTX_Buffer->adwTxKey[0]);
-    pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
-    wTxBufSize = sizeof(STxBufHead);
+	pTxBufHead = &pTX_Buffer->fifo_head;
+	pbyTxBufferAddr = (u8 *)&pTxBufHead->adwTxKey[0];
+	wTxBufSize = sizeof(struct vnt_tx_fifo_head);
 
     if (pDevice->byBBType == BB_TYPE_11A) {
         wCurrentRate = RATE_6M;
@@ -2014,25 +1930,11 @@
     //the rest of pTxBufHead->wFragCtl:FragTyp will be set later in s_vFillFragParameter()
 
     if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {//802.11g packet
-	pvRrvTime = (struct vnt_rrv_time_cts *) (pbyTxBufferAddr + wTxBufSize);
-	pMICHDR = (struct vnt_mic_hdr *) (pbyTxBufferAddr + wTxBufSize +
-					sizeof(struct vnt_rrv_time_cts));
-	rts_cts = (struct vnt_cts *) (pbyTxBufferAddr + wTxBufSize +
-			sizeof(struct vnt_rrv_time_cts) + cbMICHDR);
-	pvTxDataHd = (struct vnt_tx_datahead_g *) (pbyTxBufferAddr +
-		wTxBufSize + sizeof(struct vnt_rrv_time_cts) + cbMICHDR +
-					sizeof(struct vnt_cts));
 	cbHeaderSize = wTxBufSize + sizeof(struct vnt_rrv_time_cts) + cbMICHDR +
-		sizeof(struct vnt_cts) + sizeof(struct vnt_tx_datahead_g);
+		sizeof(struct vnt_cts);
 
     }
     else {//802.11a/b packet
-
-	pvRrvTime = (struct vnt_rrv_time_ab *) (pbyTxBufferAddr + wTxBufSize);
-	pMICHDR = (struct vnt_mic_hdr *) (pbyTxBufferAddr + wTxBufSize +
-		sizeof(struct vnt_rrv_time_ab));
-	pvTxDataHd = (struct vnt_tx_datahead_ab *)(pbyTxBufferAddr +
-		wTxBufSize + sizeof(struct vnt_rrv_time_ab) + cbMICHDR);
 	cbHeaderSize = wTxBufSize + sizeof(struct vnt_rrv_time_ab) + cbMICHDR +
 					sizeof(struct vnt_tx_datahead_ab);
     }
@@ -2048,15 +1950,11 @@
     pTxBufHead->wFragCtl |= (u16)FRAGCTL_NONFRAG;
 
 	/* Fill FIFO,RrvTime,RTS,and CTS */
-	s_vGenerateTxParameter(pDevice, byPktType, wCurrentRate,
-		pbyTxBufferAddr, pvRrvTime, rts_cts,
+	uDuration = s_vGenerateTxParameter(pDevice, byPktType, wCurrentRate,
+		pTX_Buffer, &pMICHDR, cbMICHDR,
 		cbFrameSize, bNeedACK, TYPE_TXDMA0, &sEthHeader, false);
 
-    //Fill DataHead
-    uDuration = s_uFillDataHead(pDevice, byPktType, wCurrentRate, pvTxDataHd, cbFrameSize, TYPE_TXDMA0, bNeedACK,
-				AUTO_FB_NONE);
-
-    pMACHeader = (struct ieee80211_hdr *) (pbyTxBufferAddr + cbHeaderSize);
+	pMACHeader = (struct ieee80211_hdr *) (pbyTxBufferAddr + cbHeaderSize);
 
     cbReqCount = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen + (cbFrameBodySize + cbMIClen) + cbExtSuppRate;
 
@@ -2139,7 +2037,7 @@
 
         }
 
-        s_vFillTxKey(pDevice, (u8 *)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
+	s_vFillTxKey(pDevice, pTxBufHead, pbyIVHead, pTransmitKey,
 		pbyMacHdr, (u16)cbFrameBodySize, pMICHDR);
 
         if (pDevice->bEnableHostWEP) {
@@ -2164,12 +2062,16 @@
         // in the same place of other packet's Duration-field).
         // And it will cause Cisco-AP to issue Disassociation-packet
 	if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
-		((struct vnt_tx_datahead_g *)pvTxDataHd)->wDuration_a =
+		struct vnt_tx_datahead_g *data_head = &pTX_Buffer->tx_head.
+						tx_cts.tx.head.cts_g.data_head;
+		data_head->wDuration_a =
 			cpu_to_le16(p80211Header->sA2.wDurationID);
-		((struct vnt_tx_datahead_g *)pvTxDataHd)->wDuration_b =
+		data_head->wDuration_b =
 			cpu_to_le16(p80211Header->sA2.wDurationID);
 	} else {
-		((struct vnt_tx_datahead_ab *)pvTxDataHd)->wDuration =
+		struct vnt_tx_datahead_ab *data_head = &pTX_Buffer->tx_head.
+					tx_ab.tx.head.data_head_ab;
+		data_head->wDuration =
 			cpu_to_le16(p80211Header->sA2.wDurationID);
 	}
     }
@@ -2183,10 +2085,14 @@
     pContext->uBufLen = (u16)cbReqCount + 4;  //USB header
 
     if (WLAN_GET_FC_TODS(pMACHeader->frame_control) == 0) {
-        s_vSaveTxPktInfo(pDevice, (u8) (pTX_Buffer->byPKTNO & 0x0F), &(pMACHeader->addr1[0]), (u16)cbFrameSize, pTX_Buffer->wFIFOCtl);
+	s_vSaveTxPktInfo(pDevice, (u8)(pTX_Buffer->byPKTNO & 0x0F),
+			&pMACHeader->addr1[0], (u16)cbFrameSize,
+			pTxBufHead->wFIFOCtl);
     }
     else {
-        s_vSaveTxPktInfo(pDevice, (u8) (pTX_Buffer->byPKTNO & 0x0F), &(pMACHeader->addr3[0]), (u16)cbFrameSize, pTX_Buffer->wFIFOCtl);
+	s_vSaveTxPktInfo(pDevice, (u8)(pTX_Buffer->byPKTNO & 0x0F),
+			&pMACHeader->addr3[0], (u16)cbFrameSize,
+			pTxBufHead->wFIFOCtl);
     }
     PIPEnsSendBulkOut(pDevice,pContext);
     return ;
@@ -2568,7 +2474,10 @@
     pContext->Type = CONTEXT_DATA_PACKET;
     pContext->uBufLen = (u16)BytesToWrite + 4 ; //USB header
 
-    s_vSaveTxPktInfo(pDevice, (u8) (pTX_Buffer->byPKTNO & 0x0F), &(pContext->sEthHeader.h_dest[0]), (u16) (BytesToWrite-uHeaderLen), pTX_Buffer->wFIFOCtl);
+    s_vSaveTxPktInfo(pDevice, (u8)(pTX_Buffer->byPKTNO & 0x0F),
+			&pContext->sEthHeader.h_dest[0],
+			(u16)(BytesToWrite-uHeaderLen),
+			pTX_Buffer->fifo_head.wFIFOCtl);
 
     status = PIPEnsSendBulkOut(pDevice,pContext);
 
@@ -2719,7 +2628,10 @@
     pContext->Type = CONTEXT_DATA_PACKET;
     pContext->uBufLen = (u16)BytesToWrite + 4 ; //USB header
 
-    s_vSaveTxPktInfo(pDevice, (u8) (pTX_Buffer->byPKTNO & 0x0F), &(pContext->sEthHeader.h_dest[0]), (u16) (BytesToWrite-uHeaderLen), pTX_Buffer->wFIFOCtl);
+    s_vSaveTxPktInfo(pDevice, (u8)(pTX_Buffer->byPKTNO & 0x0F),
+		&pContext->sEthHeader.h_dest[0],
+		(u16)(BytesToWrite - uHeaderLen),
+		pTX_Buffer->fifo_head.wFIFOCtl);
 
     status = PIPEnsSendBulkOut(pDevice,pContext);
 
diff --git a/drivers/staging/vt6656/rxtx.h b/drivers/staging/vt6656/rxtx.h
index 4bbee1c..eecbe89 100644
--- a/drivers/staging/vt6656/rxtx.h
+++ b/drivers/staging/vt6656/rxtx.h
@@ -117,6 +117,7 @@
 	u16 wDuration_bb;
 	u16 wReserved;
 	struct ieee80211_rts data;
+	struct vnt_tx_datahead_g data_head;
 } __packed;
 
 struct vnt_rts_g_fb {
@@ -131,6 +132,7 @@
 	u16 wRTSDuration_ba_f1;
 	u16 wRTSDuration_aa_f1;
 	struct ieee80211_rts data;
+	struct vnt_tx_datahead_g_fb data_head;
 } __packed;
 
 struct vnt_rts_ab {
@@ -138,6 +140,7 @@
 	u16 wDuration;
 	u16 wReserved;
 	struct ieee80211_rts data;
+	struct vnt_tx_datahead_ab data_head;
 } __packed;
 
 struct vnt_rts_a_fb {
@@ -147,6 +150,7 @@
 	u16 wRTSDuration_f0;
 	u16 wRTSDuration_f1;
 	struct ieee80211_rts data;
+	struct vnt_tx_datahead_a_fb data_head;
 } __packed;
 
 /* CTS buffer header */
@@ -156,6 +160,7 @@
 	u16 wReserved;
 	struct ieee80211_cts data;
 	u16 reserved2;
+	struct vnt_tx_datahead_g data_head;
 } __packed;
 
 struct vnt_cts_fb {
@@ -166,6 +171,7 @@
 	u16 wCTSDuration_ba_f1;
 	struct ieee80211_cts data;
 	u16 reserved2;
+	struct vnt_tx_datahead_g_fb data_head;
 } __packed;
 
 union vnt_tx_data_head {
@@ -178,12 +184,37 @@
 	/* cts g */
 	struct vnt_cts cts_g;
 	struct vnt_cts_fb cts_g_fb;
+	/* no rts/cts */
+	struct vnt_tx_datahead_a_fb data_head_a_fb;
+	struct vnt_tx_datahead_ab data_head_ab;
 };
 
-struct vnt_tx_buffer {
-	u8 byType;
-	u8 byPKTNO;
-	u16 wTxByteCount;
+struct vnt_tx_mic_hdr {
+	struct vnt_mic_hdr hdr;
+	union vnt_tx_data_head head;
+} __packed;
+
+union vnt_tx {
+	struct vnt_tx_mic_hdr mic;
+	union vnt_tx_data_head head;
+};
+
+union vnt_tx_head {
+	struct {
+		struct vnt_rrv_time_rts rts;
+		union vnt_tx tx;
+	} __packed tx_rts;
+	struct {
+		struct vnt_rrv_time_cts cts;
+		union vnt_tx tx;
+	} __packed tx_cts;
+	struct {
+		struct vnt_rrv_time_ab ab;
+		union vnt_tx tx;
+	} __packed tx_ab;
+};
+
+struct vnt_tx_fifo_head {
 	u32 adwTxKey[4];
 	u16 wFIFOCtl;
 	u16 wTimeStamp;
@@ -191,6 +222,14 @@
 	u16 wReserved;
 } __packed;
 
+struct vnt_tx_buffer {
+	u8 byType;
+	u8 byPKTNO;
+	u16 wTxByteCount;
+	struct vnt_tx_fifo_head fifo_head;
+	union vnt_tx_head tx_head;
+} __packed;
+
 struct vnt_beacon_buffer {
 	u8 byType;
 	u8 byPKTNO;
diff --git a/drivers/staging/vt6656/usbpipe.c b/drivers/staging/vt6656/usbpipe.c
index 3a03f1d..5fc18ad 100644
--- a/drivers/staging/vt6656/usbpipe.c
+++ b/drivers/staging/vt6656/usbpipe.c
@@ -118,6 +118,9 @@
 	if (pDevice->Flags & fMP_CONTROL_READS)
 		return STATUS_FAILURE;
 
+	if (pDevice->pControlURB->hcpriv)
+		return STATUS_FAILURE;
+
 	MP_SET_FLAG(pDevice, fMP_CONTROL_WRITES);
 
 	pDevice->sUsbCtlRequest.bRequestType = 0x40;
@@ -177,6 +180,9 @@
 	if (pDevice->Flags & fMP_CONTROL_WRITES)
 		return STATUS_FAILURE;
 
+	if (pDevice->pControlURB->hcpriv)
+		return STATUS_FAILURE;
+
 	MP_SET_FLAG(pDevice, fMP_CONTROL_READS);
 
 	pDevice->sUsbCtlRequest.bRequestType = 0xC0;
@@ -656,8 +662,6 @@
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Write %d bytes\n",(int)ulBufLen);
         pDevice->ulBulkOutBytesWrite += ulBufLen;
         pDevice->ulBulkOutContCRCError = 0;
-	pDevice->nTxDataTimeCout = 0;
-
     } else {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BULK Out failed %d\n", status);
         pDevice->ulBulkOutError++;
diff --git a/drivers/staging/vt6656/wcmd.c b/drivers/staging/vt6656/wcmd.c
index 0013cb7..2f8e2a8 100644
--- a/drivers/staging/vt6656/wcmd.c
+++ b/drivers/staging/vt6656/wcmd.c
@@ -268,20 +268,14 @@
 
 void vCommandTimerWait(struct vnt_private *pDevice, unsigned long MSecond)
 {
-
-	init_timer(&pDevice->sTimerCommand);
-
-	pDevice->sTimerCommand.data = (unsigned long)pDevice;
-	pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
-	pDevice->sTimerCommand.expires = RUN_AT((MSecond * HZ) / 1000);
-
-	add_timer(&pDevice->sTimerCommand);
-
-	return;
+	schedule_delayed_work(&pDevice->run_command_work,
+						msecs_to_jiffies(MSecond));
 }
 
-void vRunCommand(struct vnt_private *pDevice)
+void vRunCommand(struct work_struct *work)
 {
+	struct vnt_private *pDevice =
+		container_of(work, struct vnt_private, run_command_work.work);
 	struct vnt_manager *pMgmt = &pDevice->vnt_mgmt;
 	PWLAN_IE_SSID pItemSSID;
 	PWLAN_IE_SSID pItemSSIDCurr;
@@ -292,6 +286,9 @@
 	u8 byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
 	u8 byData;
 
+	if (pDevice->Flags & fMP_DISCONNECTED)
+		return;
+
     if (pDevice->dwDiagRefCount != 0)
         return;
     if (pDevice->bCmdRunning != true)
@@ -660,22 +657,6 @@
                     netif_wake_queue(pDevice->dev);
                 }
 
-		 if(pDevice->IsTxDataTrigger != false)   {    //TxDataTimer is not triggered at the first time
-                     // printk("Re-initial TxDataTimer****\n");
-		    del_timer(&pDevice->sTimerTxData);
-                      init_timer(&pDevice->sTimerTxData);
-			pDevice->sTimerTxData.data = (unsigned long) pDevice;
-                      pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
-                      pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
-                      pDevice->fTxDataInSleep = false;
-                      pDevice->nTxDataTimeCout = 0;
-		 }
-		 else {
-		   // printk("mike:-->First time trigger TimerTxData InSleep\n");
-		 }
-		pDevice->IsTxDataTrigger = true;
-                add_timer(&pDevice->sTimerTxData);
-
             }
 	   else if(pMgmt->eCurrState < WMAC_STATE_ASSOCPENDING) {
                printk("WLAN_ASSOCIATE_WAIT:Association Fail???\n");
@@ -687,7 +668,6 @@
 	       vCommandTimerWait((void *) pDevice, ASSOCIATE_TIMEOUT/2);
 	       return;
 	   }
-	          pDevice->byLinkWaitCount = 0;
 
             s_bCommandComplete(pDevice);
             break;
@@ -696,7 +676,7 @@
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_CMD_AP_MODE_START\n");
 
             if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
-                del_timer(&pMgmt->sTimerSecondCallback);
+		cancel_delayed_work_sync(&pDevice->second_callback_work);
                 pMgmt->eCurrState = WMAC_STATE_IDLE;
                 pMgmt->eCurrMode = WMAC_MODE_STANDBY;
                 pDevice->bLinkPass = false;
@@ -724,7 +704,7 @@
                 }
                 pDevice->bLinkPass = true;
                 ControlvMaskByte(pDevice,MESSAGE_REQUEST_MACREG,MAC_REG_PAPEDELAY,LEDSTS_STS,LEDSTS_INTER);
-                add_timer(&pMgmt->sTimerSecondCallback);
+		schedule_delayed_work(&pDevice->second_callback_work, HZ);
             }
             s_bCommandComplete(pDevice);
             break;
@@ -1156,14 +1136,8 @@
 //mike add:reset command timer
 void vResetCommandTimer(struct vnt_private *pDevice)
 {
+	cancel_delayed_work_sync(&pDevice->run_command_work);
 
-	//delete timer
-	del_timer(&pDevice->sTimerCommand);
-	//init timer
-	init_timer(&pDevice->sTimerCommand);
-	pDevice->sTimerCommand.data = (unsigned long)pDevice;
-	pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
-	pDevice->sTimerCommand.expires = RUN_AT(HZ);
 	pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
 	pDevice->uCmdDequeueIdx = 0;
 	pDevice->uCmdEnqueueIdx = 0;
@@ -1171,33 +1145,3 @@
 	pDevice->bCmdRunning = false;
 	pDevice->bCmdClear = false;
 }
-
-void BSSvSecondTxData(struct vnt_private *pDevice)
-{
-	struct vnt_manager *pMgmt = &pDevice->vnt_mgmt;
-
-	pDevice->nTxDataTimeCout++;
-
-	if (pDevice->nTxDataTimeCout < 4) {   //don't tx data if timer less than 40s
-		// printk("mike:%s-->no data Tx not exceed the desired Time as %d\n",__FUNCTION__,
-		//  	(int)pDevice->nTxDataTimeCout);
-		pDevice->sTimerTxData.expires = RUN_AT(10 * HZ);      //10s callback
-		add_timer(&pDevice->sTimerTxData);
-		return;
-	}
-
-	spin_lock_irq(&pDevice->lock);
-	//is wap_supplicant running successful OR only open && sharekey mode!
-	if (((pDevice->bLinkPass == true) &&
-		(pMgmt->eAuthenMode < WMAC_AUTH_WPA)) ||  //open && sharekey linking
-		(pDevice->fWPA_Authened == true)) {   //wpa linking
-		//   printk("mike:%s-->InSleep Tx Data Procedure\n",__FUNCTION__);
-		pDevice->fTxDataInSleep = true;
-		PSbSendNullPacket(pDevice);      //send null packet
-		pDevice->fTxDataInSleep = false;
-	}
-	spin_unlock_irq(&pDevice->lock);
-
-	pDevice->sTimerTxData.expires = RUN_AT(10 * HZ);      //10s callback
-	add_timer(&pDevice->sTimerTxData);
-}
diff --git a/drivers/staging/vt6656/wcmd.h b/drivers/staging/vt6656/wcmd.h
index db8b4cf..caf2684 100644
--- a/drivers/staging/vt6656/wcmd.h
+++ b/drivers/staging/vt6656/wcmd.h
@@ -105,15 +105,6 @@
 
 int bScheduleCommand(struct vnt_private *, CMD_CODE eCommand, u8 *pbyItem0);
 
-void vRunCommand(struct vnt_private *);
-
-/*
-void
-WCMDvCommandThread(
-    void * Context
-    );
-*/
-
-void BSSvSecondTxData(struct vnt_private *);
+void vRunCommand(struct work_struct *work);
 
 #endif /* __WCMD_H__ */
diff --git a/drivers/staging/vt6656/wctl.c b/drivers/staging/vt6656/wctl.c
index 47a655d..814342c 100644
--- a/drivers/staging/vt6656/wctl.c
+++ b/drivers/staging/vt6656/wctl.c
@@ -69,8 +69,7 @@
         for (ii = 0; ii < DUPLICATE_RX_CACHE_LENGTH; ii++) {
             pCacheEntry = &(pCache->asCacheEntry[uIndex]);
             if ((pCacheEntry->wFmSequence == pMACHeader->seq_ctrl) &&
-		(!compare_ether_addr(&(pCacheEntry->abyAddr2[0]),
-				     &(pMACHeader->addr2[0]))) &&
+		ether_addr_equal(pCacheEntry->abyAddr2, pMACHeader->addr2) &&
                 (LOBYTE(pCacheEntry->wFrameCtl) == LOBYTE(pMACHeader->frame_control))
                 ) {
                 /* Duplicate match */
@@ -110,8 +109,8 @@
 
 	for (ii = 0; ii < pDevice->cbDFCB; ii++) {
 		if ((pDevice->sRxDFCB[ii].bInUse == true) &&
-		    (!compare_ether_addr(&(pDevice->sRxDFCB[ii].abyAddr2[0]),
-					  &(pMACHeader->addr2[0])))) {
+		    ether_addr_equal(pDevice->sRxDFCB[ii].abyAddr2,
+				     pMACHeader->addr2)) {
 			return ii;
 		}
 	}
diff --git a/drivers/staging/vt6656/wmgr.c b/drivers/staging/vt6656/wmgr.c
index b6cbd13..e26c415 100644
--- a/drivers/staging/vt6656/wmgr.c
+++ b/drivers/staging/vt6656/wmgr.c
@@ -81,7 +81,7 @@
 #include "control.h"
 #include "rndis.h"
 
-static int          msglevel                =MSG_LEVEL_INFO;
+static int msglevel = MSG_LEVEL_INFO;
 //static int          msglevel                =MSG_LEVEL_DEBUG;
 
 static int ChannelExceedZoneType(struct vnt_private *, u8 byCurrChannel);
@@ -213,24 +213,6 @@
     pMgmt->wIBSSBeaconPeriod = DEFAULT_IBSS_BI;
     BSSvClearBSSList((void *) pDevice, false);
 
-    init_timer(&pMgmt->sTimerSecondCallback);
-    pMgmt->sTimerSecondCallback.data = (unsigned long)pDevice;
-    pMgmt->sTimerSecondCallback.function = (TimerFunction)BSSvSecondCallBack;
-    pMgmt->sTimerSecondCallback.expires = RUN_AT(HZ);
-
-    init_timer(&pDevice->sTimerCommand);
-    pDevice->sTimerCommand.data = (unsigned long)pDevice;
-    pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
-    pDevice->sTimerCommand.expires = RUN_AT(HZ);
-
-    init_timer(&pDevice->sTimerTxData);
-    pDevice->sTimerTxData.data = (unsigned long)pDevice;
-    pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
-    pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
-    pDevice->fTxDataInSleep = false;
-    pDevice->IsTxDataTrigger = false;
-    pDevice->nTxDataTimeCout = 0;
-
     pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
     pDevice->uCmdDequeueIdx = 0;
     pDevice->uCmdEnqueueIdx = 0;
@@ -844,8 +826,8 @@
               pDevice->bwextstep3 = false;
               pDevice->bWPASuppWextEnabled = false;
 
-if(pMgmt->eCurrState == WMAC_STATE_ASSOC)
-      timer_expire(pDevice->sTimerCommand, 0);
+	if (pMgmt->eCurrState == WMAC_STATE_ASSOC)
+		schedule_delayed_work(&pDevice->run_command_work, 0);
 
     return;
 }
@@ -1127,7 +1109,7 @@
             if ( cpu_to_le16((*(pFrame->pwStatus))) == WLAN_MGMT_STATUS_SUCCESS ){
                 DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (OPEN) Successful.\n");
                 pMgmt->eCurrState = WMAC_STATE_AUTH;
-	       timer_expire(pDevice->sTimerCommand, 0);
+		schedule_delayed_work(&pDevice->run_command_work, 0);
             }
             else {
                 DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (OPEN) Failed.\n");
@@ -1302,7 +1284,7 @@
     if ( cpu_to_le16((*(pFrame->pwStatus))) == WLAN_MGMT_STATUS_SUCCESS ){
         DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (SHAREDKEY) Successful.\n");
         pMgmt->eCurrState = WMAC_STATE_AUTH;
-        timer_expire(pDevice->sTimerCommand, 0);
+	schedule_delayed_work(&pDevice->run_command_work, 0);
     }
     else{
         DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (SHAREDKEY) Failed.\n");
@@ -1422,8 +1404,8 @@
 	   pDevice->fWPA_Authened = false;
             DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO  "AP deauthed me, reason=%d.\n", cpu_to_le16((*(sFrame.pwReason))));
             // TODO: update BSS list for specific BSSID if pre-authentication case
-	    if (!compare_ether_addr(sFrame.pHdr->sA3.abyAddr3,
-				    pMgmt->abyCurrBSSID)) {
+	    if (ether_addr_equal(sFrame.pHdr->sA3.abyAddr3,
+				 pMgmt->abyCurrBSSID)) {
                 if (pMgmt->eCurrState >= WMAC_STATE_AUTHPENDING) {
                     pMgmt->sNodeDBTable[0].bActive = false;
                     pMgmt->eCurrMode = WMAC_MODE_STANDBY;
@@ -3095,7 +3077,7 @@
  *
  *
  * Return Value:
- *    A ptr to frame or NULL on allocation failue
+ *    A ptr to frame or NULL on allocation failure
  *
 -*/
 
diff --git a/drivers/staging/vt6656/wmgr.h b/drivers/staging/vt6656/wmgr.h
index 5424c7f..26ba47d 100644
--- a/drivers/staging/vt6656/wmgr.h
+++ b/drivers/staging/vt6656/wmgr.h
@@ -310,9 +310,6 @@
 	u8 byMgmtPacketPool[sizeof(struct vnt_tx_mgmt)
 		+ WLAN_A3FR_MAXLEN];
 
-	/* One second callback timer */
-	struct timer_list sTimerSecondCallback;
-
 	/* Temporarily Rx Mgmt Packet Descriptor */
 	struct vnt_rx_mgmt sRxPacket;
 
diff --git a/drivers/staging/vt6656/wpactl.c b/drivers/staging/vt6656/wpactl.c
index 9f1b413..003bd7c 100644
--- a/drivers/staging/vt6656/wpactl.c
+++ b/drivers/staging/vt6656/wpactl.c
@@ -227,7 +227,7 @@
 			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Pairwise Key Set\n");
 		} else {
 			// Key Table Full
-			if (!compare_ether_addr(&param->addr[0], pDevice->abyBSSID)) {
+			if (ether_addr_equal(param->addr, pDevice->abyBSSID)) {
 				//DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA -Key Table Full.2\n"));
 				return -EINVAL;
 			} else {
diff --git a/drivers/staging/winbond/core.h b/drivers/staging/winbond/core.h
index 6160b2f..fc0ef24 100644
--- a/drivers/staging/winbond/core.h
+++ b/drivers/staging/winbond/core.h
@@ -18,8 +18,8 @@
 struct mlme_frame {
 	s8		*pMMPDU;
 	u16		len;
-	u8		DataType;
-	u8		IsInUsed;
+	u8		data_type;
+	u8		is_in_used;
 
 	u8		TxMMPDU[MAX_NUM_TX_MMPDU][MAX_MMPDU_SIZE];
 	u8		TxMMPDUInUse[(MAX_NUM_TX_MMPDU + 3) & ~0x03];
@@ -52,13 +52,9 @@
 	struct hw_data sHwData;	/*For HAL */
 	struct wb35_mds Mds;
 
-	atomic_t ThreadCount;
-
 	u32 RxByteCount;
 	u32 TxByteCount;
 
-	u8 LinkName[WB_MAX_LINK_NAME_LEN];
-
 	bool enabled;
 };
 
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index fcc3d21..cac7720 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -412,7 +412,7 @@
 	desc->buffer_size[desc->InternalUsed] = adapter->sMlmeFrame.len;
 	desc->buffer_total_size += adapter->sMlmeFrame.len;
 	desc->buffer_number++;
-	desc->Type = adapter->sMlmeFrame.DataType;
+	desc->Type = adapter->sMlmeFrame.data_type;
 }
 
 static void MLMEfreeMMPDUBuffer(struct wbsoft_priv *adapter, s8 *pData)
@@ -440,7 +440,7 @@
 	MLMEfreeMMPDUBuffer(adapter, adapter->sMlmeFrame.pMMPDU);
 
 	/* Return resource */
-	adapter->sMlmeFrame.IsInUsed = PACKET_FREE_TO_USE;
+	adapter->sMlmeFrame.is_in_used = PACKET_FREE_TO_USE;
 }
 
 void
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 560c0ab..b031ecd 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -21,6 +21,7 @@
 #include "wbhal.h"
 #include "wb35reg_f.h"
 #include "core.h"
+#include "mto.h"
 
 /* Declare SQ3 to rate and fragmentation threshold table */
 /* Declare fragmentation threshold table */
@@ -45,12 +46,6 @@
 
 static u8 boSparseTxTraffic;
 
-void MTO_Init(struct wbsoft_priv *adapter);
-void TxRateReductionCtrl(struct wbsoft_priv *adapter);
-void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
-void MTO_TxFailed(struct wbsoft_priv *adapter);
-void hal_get_dto_para(struct wbsoft_priv *adapter, char *buffer);
-
 /*
  * ===========================================================================
  * MTO_Init --
diff --git a/drivers/staging/winbond/mto.h b/drivers/staging/winbond/mto.h
index a0f659c..8d41eed 100644
--- a/drivers/staging/winbond/mto.h
+++ b/drivers/staging/winbond/mto.h
@@ -127,12 +127,8 @@
 #define MTO_DATA_RATE()			MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()]
 #define MTO_FRAG_TH()			MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()]
 
-extern void MTO_Init(struct wbsoft_priv *);
-extern void MTO_PeriodicTimerExpired(struct wbsoft_priv *);
-extern void MTO_SetDTORateRange(struct wbsoft_priv *, u8 *, u8);
-extern u8 MTO_GetTxRate(struct wbsoft_priv *adapter, u32 fpdu_len);
-extern u8 MTO_GetTxFallbackRate(struct wbsoft_priv *adapter);
-extern void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
+void MTO_Init(struct wbsoft_priv *);
+void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
 
 #endif /* __MTO_H__ */
 
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index cfbfbbb..8aecced 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -27,10 +27,12 @@
 #define DEG2RAD(X)      (0.017453 * (X))
 
 static const s32 Angles[] = {
-	FIXED(DEG2RAD(45.0)),     FIXED(DEG2RAD(26.565)),   FIXED(DEG2RAD(14.0362)),
-	FIXED(DEG2RAD(7.12502)),  FIXED(DEG2RAD(3.57633)),  FIXED(DEG2RAD(1.78991)),
-	FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)), FIXED(DEG2RAD(0.223811)),
-	FIXED(DEG2RAD(0.111906)), FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
+	FIXED(DEG2RAD(45.0)),     FIXED(DEG2RAD(26.565)),
+	FIXED(DEG2RAD(14.0362)),  FIXED(DEG2RAD(7.12502)),
+	FIXED(DEG2RAD(3.57633)),  FIXED(DEG2RAD(1.78991)),
+	FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)),
+	FIXED(DEG2RAD(0.223811)), FIXED(DEG2RAD(0.111906)),
+	FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
 };
 
 /****************** LOCAL FUNCTION DECLARATION SECTION **********************/
@@ -42,7 +44,7 @@
 
 /****************** FUNCTION DEFINITION SECTION *****************************/
 
-s32 _s13_to_s32(u32 data)
+static s32 _s13_to_s32(u32 data)
 {
 	u32     val;
 
@@ -54,22 +56,8 @@
 	return (s32) val;
 }
 
-u32 _s32_to_s13(s32 data)
-{
-	u32     val;
-
-	if (data > 4095)
-		data = 4095;
-	else if (data < -4096)
-		data = -4096;
-
-	val = data & 0x1FFF;
-
-	return val;
-}
-
 /****************************************************************************/
-s32 _s4_to_s32(u32 data)
+static s32 _s4_to_s32(u32 data)
 {
 	s32     val;
 
@@ -81,7 +69,7 @@
 	return val;
 }
 
-u32 _s32_to_s4(s32 data)
+static u32 _s32_to_s4(s32 data)
 {
 	u32     val;
 
@@ -96,7 +84,7 @@
 }
 
 /****************************************************************************/
-s32 _s5_to_s32(u32 data)
+static s32 _s5_to_s32(u32 data)
 {
 	s32     val;
 
@@ -108,7 +96,7 @@
 	return val;
 }
 
-u32 _s32_to_s5(s32 data)
+static u32 _s32_to_s5(s32 data)
 {
 	u32     val;
 
@@ -123,7 +111,7 @@
 }
 
 /****************************************************************************/
-s32 _s6_to_s32(u32 data)
+static s32 _s6_to_s32(u32 data)
 {
 	s32     val;
 
@@ -135,7 +123,7 @@
 	return val;
 }
 
-u32 _s32_to_s6(s32 data)
+static u32 _s32_to_s6(s32 data)
 {
 	u32     val;
 
@@ -150,34 +138,7 @@
 }
 
 /****************************************************************************/
-s32 _s9_to_s32(u32 data)
-{
-	s32     val;
-
-	val = data & 0x00FF;
-
-	if ((data & BIT(8)) != 0)
-		val |= 0xFFFFFF00;
-
-	return val;
-}
-
-u32 _s32_to_s9(s32 data)
-{
-	u32     val;
-
-	if (data > 255)
-		data = 255;
-	else if (data < -256)
-		data = -256;
-
-	val = data & 0x01FF;
-
-	return val;
-}
-
-/****************************************************************************/
-s32 _floor(s32 n)
+static s32 _floor(s32 n)
 {
 	if (n > 0)
 		n += 5;
@@ -193,7 +154,7 @@
  * sqsum is the input and the output is sq_rt;
  * The maximum of sqsum = 2^27 -1;
  */
-u32 _sqrt(u32 sqsum)
+static u32 _sqrt(u32 sqsum)
 {
 	u32     sq_rt;
 
@@ -261,7 +222,7 @@
 }
 
 /****************************************************************************/
-void _sin_cos(s32 angle, s32 *sin, s32 *cos)
+static void _sin_cos(s32 angle, s32 *sin, s32 *cos)
 {
 	s32 X, Y, TargetAngle, CurrAngle;
 	unsigned    Step;
@@ -296,7 +257,8 @@
 	}
 }
 
-static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, u32 *pValue)
+static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number,
+				     u32 *pValue)
 {
 	if (number < 0x1000)
 		number += 0x1000;
@@ -304,7 +266,8 @@
 }
 #define hw_get_dxx_reg(_A, _B, _C) hal_get_dxx_reg(_A, _B, (u32 *)_C)
 
-static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number, u32 value)
+static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number,
+				     u32 value)
 {
 	unsigned char ret;
 
@@ -316,7 +279,7 @@
 #define hw_set_dxx_reg(_A, _B, _C) hal_set_dxx_reg(_A, _B, (u32)_C)
 
 
-void _reset_rx_cal(struct hw_data *phw_data)
+static void _reset_rx_cal(struct hw_data *phw_data)
 {
 	u32     val;
 
@@ -336,7 +299,7 @@
 
 
 /**********************************************/
-void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequency)
+static void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequency)
 {
 	u32     reg_agc_ctrl3;
 	u32     reg_a_acq_ctrl;
@@ -407,7 +370,8 @@
 	PHY_DEBUG(("[CAL]    ** adc_dc_cal_i = %d (0x%04X)\n",
 			   _s9_to_s32(val&0x000001FF), val&0x000001FF));
 	PHY_DEBUG(("[CAL]    ** adc_dc_cal_q = %d (0x%04X)\n",
-			   _s9_to_s32((val&0x0003FE00)>>9), (val&0x0003FE00)>>9));
+			   _s9_to_s32((val&0x0003FE00)>>9),
+			   (val&0x0003FE00)>>9));
 #endif
 
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val);
@@ -430,249 +394,8 @@
 	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
 }
 
-/****************************************************************/
-void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
-{
-	u32     reg_agc_ctrl3;
-	u32     reg_mode_ctrl;
-	u32     reg_dc_cancel;
-	s32     iqcal_image_i;
-	s32     iqcal_image_q;
-	u32     sqsum;
-	s32     mag_0;
-	s32     mag_1;
-	s32     fix_cancel_dc_i = 0;
-	u32     val;
-	int     loop;
-
-	PHY_DEBUG(("[CAL] -> [2]_txidac_dc_offset_cancellation()\n"));
-
-	/* a. Set to "TX calibration mode" */
-
-	/* 0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits */
-	phy_set_rf_data(phw_data, 1, (1<<24)|0xEE3FC2);
-	/* 0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit */
-	phy_set_rf_data(phw_data, 11, (11<<24)|0x1901D6);
-	/* 0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized */
-	phy_set_rf_data(phw_data, 5, (5<<24)|0x24C48A);
-	/* 0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized */
-	phy_set_rf_data(phw_data, 6, (6<<24)|0x06890C);
-	/* 0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode */
-	phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0);
-
-	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); /* IQ_Alpha Changed */
-
-	/* a. Disable AGC */
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
-	reg_agc_ctrl3 &= ~BIT(2);
-	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
-
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL5, &val);
-	val |= MASK_AGC_FIX_GAIN;
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val);
-
-	/* b. set iqcal_mode[1:0] to 0x2 and set iqcal_tone[3:2] to 0 */
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-
-	PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
-	reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
-
-	/* mode=2, tone=0 */
-	/* reg_mode_ctrl |= (MASK_CALIB_START|2); */
-
-	/* mode=2, tone=1 */
-	/* reg_mode_ctrl |= (MASK_CALIB_START|2|(1<<2)); */
-
-	/* mode=2, tone=2 */
-	reg_mode_ctrl |= (MASK_CALIB_START|2|(2<<2));
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-	hw_get_dxx_reg(phw_data, 0x5C, &reg_dc_cancel);
-	PHY_DEBUG(("[CAL]    DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
-
-	for (loop = 0; loop < LOOP_TIMES; loop++) {
-		PHY_DEBUG(("[CAL] [%d.] ==================================\n", loop));
-
-		/* c. reset cancel_dc_i[9:5] and cancel_dc_q[4:0] in register DC_Cancel */
-		reg_dc_cancel &= ~(0x03FF);
-		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
-		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
-
-		hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
-		PHY_DEBUG(("[CAL]    CALIB_READ2 = 0x%08X\n", val));
-
-		iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
-		iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
-		sqsum = iqcal_image_i*iqcal_image_i + iqcal_image_q*iqcal_image_q;
-		mag_0 = (s32) _sqrt(sqsum);
-		PHY_DEBUG(("[CAL]    mag_0=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
-				   mag_0, iqcal_image_i, iqcal_image_q));
-
-		/* d. */
-		reg_dc_cancel |= (1 << CANCEL_DC_I_SHIFT);
-		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
-		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
-
-		hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
-		PHY_DEBUG(("[CAL]    CALIB_READ2 = 0x%08X\n", val));
-
-		iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
-		iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
-		sqsum = iqcal_image_i*iqcal_image_i + iqcal_image_q*iqcal_image_q;
-		mag_1 = (s32) _sqrt(sqsum);
-		PHY_DEBUG(("[CAL]    mag_1=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
-				   mag_1, iqcal_image_i, iqcal_image_q));
-
-		/* e. Calculate the correct DC offset cancellation value for I */
-		if (mag_0 != mag_1)
-			fix_cancel_dc_i = (mag_0*10000) / (mag_0*10000 - mag_1*10000);
-		else {
-			if (mag_0 == mag_1)
-				PHY_DEBUG(("[CAL]   ***** mag_0 = mag_1 !!\n"));
-			fix_cancel_dc_i = 0;
-		}
-
-		PHY_DEBUG(("[CAL]    ** fix_cancel_dc_i = %d (0x%04X)\n",
-				   fix_cancel_dc_i, _s32_to_s5(fix_cancel_dc_i)));
-
-		if ((abs(mag_1-mag_0)*6) > mag_0)
-			break;
-	}
-
-	if (loop >= 19)
-		fix_cancel_dc_i = 0;
-
-	reg_dc_cancel &= ~(0x03FF);
-	reg_dc_cancel |= (_s32_to_s5(fix_cancel_dc_i) << CANCEL_DC_I_SHIFT);
-	hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
-	PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
-
-	/* g. */
-	reg_mode_ctrl &= ~MASK_CALIB_START;
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-}
-
-/*****************************************************/
-void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
-{
-	u32     reg_agc_ctrl3;
-	u32     reg_mode_ctrl;
-	u32     reg_dc_cancel;
-	s32     iqcal_image_i;
-	s32     iqcal_image_q;
-	u32     sqsum;
-	s32     mag_0;
-	s32     mag_1;
-	s32     fix_cancel_dc_q = 0;
-	u32     val;
-	int     loop;
-
-	PHY_DEBUG(("[CAL] -> [3]_txqdac_dc_offset_cacellation()\n"));
-	/*0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits */
-	phy_set_rf_data(phw_data, 1, (1<<24)|0xEE3FC2);
-	/* 0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit */
-	phy_set_rf_data(phw_data, 11, (11<<24)|0x1901D6);
-	/* 0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized */
-	phy_set_rf_data(phw_data, 5, (5<<24)|0x24C48A);
-	/* 0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized */
-	phy_set_rf_data(phw_data, 6, (6<<24)|0x06890C);
-	/* 0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode */
-	phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0);
-
-	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); /* IQ_Alpha Changed */
-
-	/* a. Disable AGC */
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
-	reg_agc_ctrl3 &= ~BIT(2);
-	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
-
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL5, &val);
-	val |= MASK_AGC_FIX_GAIN;
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val);
-
-	/* a. set iqcal_mode[1:0] to 0x3 and set iqcal_tone[3:2] to 0 */
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
-
-	/* reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE); */
-	reg_mode_ctrl &= ~(MASK_IQCAL_MODE);
-	reg_mode_ctrl |= (MASK_CALIB_START|3);
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-	hw_get_dxx_reg(phw_data, 0x5C, &reg_dc_cancel);
-	PHY_DEBUG(("[CAL]    DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
-
-	for (loop = 0; loop < LOOP_TIMES; loop++) {
-		PHY_DEBUG(("[CAL] [%d.] ==================================\n", loop));
-
-		/* b. reset cancel_dc_q[4:0] in register DC_Cancel */
-		reg_dc_cancel &= ~(0x001F);
-		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
-		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
-
-		hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
-		PHY_DEBUG(("[CAL]    CALIB_READ2 = 0x%08X\n", val));
-
-		iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
-		iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
-		sqsum = iqcal_image_i*iqcal_image_i + iqcal_image_q*iqcal_image_q;
-		mag_0 = _sqrt(sqsum);
-		PHY_DEBUG(("[CAL]    mag_0=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
-				   mag_0, iqcal_image_i, iqcal_image_q));
-
-		/* c. */
-		reg_dc_cancel |= (1 << CANCEL_DC_Q_SHIFT);
-		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
-		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
-
-		hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
-		PHY_DEBUG(("[CAL]    CALIB_READ2 = 0x%08X\n", val));
-
-		iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
-		iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
-		sqsum = iqcal_image_i*iqcal_image_i + iqcal_image_q*iqcal_image_q;
-		mag_1 = _sqrt(sqsum);
-		PHY_DEBUG(("[CAL]    mag_1=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
-				   mag_1, iqcal_image_i, iqcal_image_q));
-
-		/* d. Calculate the correct DC offset cancellation value for I */
-		if (mag_0 != mag_1)
-			fix_cancel_dc_q = (mag_0*10000) / (mag_0*10000 - mag_1*10000);
-		else {
-			if (mag_0 == mag_1)
-				PHY_DEBUG(("[CAL]   ***** mag_0 = mag_1 !!\n"));
-			fix_cancel_dc_q = 0;
-		}
-
-		PHY_DEBUG(("[CAL]    ** fix_cancel_dc_q = %d (0x%04X)\n",
-				   fix_cancel_dc_q, _s32_to_s5(fix_cancel_dc_q)));
-
-		if ((abs(mag_1-mag_0)*6) > mag_0)
-			break;
-	}
-
-	if (loop >= 19)
-		fix_cancel_dc_q = 0;
-
-	reg_dc_cancel &= ~(0x001F);
-	reg_dc_cancel |= (_s32_to_s5(fix_cancel_dc_q) << CANCEL_DC_Q_SHIFT);
-	hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
-	PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
-
-
-	/* f. */
-	reg_mode_ctrl &= ~MASK_CALIB_START;
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-}
-
 /* 20060612.1.a 20060718.1 Modify */
-u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
+static u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 						   s32 a_2_threshold,
 						   s32 b_2_threshold)
 {
@@ -711,7 +434,8 @@
 	loop = LOOP_TIMES;
 
 	while (loop > 0) {
-		PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
+		PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n",
+				   (LOOP_TIMES-loop+1)));
 
 		iqcal_tone_i_avg = 0;
 		iqcal_tone_q_avg = 0;
@@ -719,8 +443,8 @@
 			return 0;
 		for (capture_time = 0; capture_time < 10; capture_time++) {
 			/*
-			 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
-			 *    enable "IQ calibration Mode II"
+			 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start"
+			 *    to 0x1 to enable "IQ calibration Mode II"
 			 */
 			reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
 			reg_mode_ctrl &= ~MASK_IQCAL_MODE;
@@ -749,8 +473,8 @@
 			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
 			/*
-			 * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
-			 *    enable "IQ calibration Mode II"
+			 * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start"
+			 *    to 0x1 to enable "IQ calibration Mode II"
 			 */
 			/* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */
 			hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
@@ -766,7 +490,7 @@
 			iqcal_tone_i = _s13_to_s32(val & 0x00001FFF);
 			iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
 			PHY_DEBUG(("[CAL]    ** iqcal_tone_i = %d, iqcal_tone_q = %d\n",
-			iqcal_tone_i, iqcal_tone_q));
+					   iqcal_tone_i, iqcal_tone_q));
 			if (capture_time == 0)
 				continue;
 			else {
@@ -955,7 +679,7 @@
 	return 1;
 }
 
-void _tx_iq_calibration_winbond(struct hw_data *phw_data)
+static void _tx_iq_calibration_winbond(struct hw_data *phw_data)
 {
 	u32     reg_agc_ctrl3;
 #ifdef _DEBUG
@@ -1101,7 +825,7 @@
 }
 
 /*****************************************************/
-u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 frequency)
+static u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 frequency)
 {
 	u32     reg_mode_ctrl;
 	s32     iqcal_tone_i;
@@ -1146,7 +870,8 @@
 	/* for (loop = 0; loop < LOOP_TIMES; loop++) */
 	loop = LOOP_TIMES;
 	while (loop > 0) {
-		PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
+		PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n",
+				   (LOOP_TIMES-loop+1)));
 		iqcal_tone_i_avg = 0;
 		iqcal_tone_q_avg = 0;
 		iqcal_image_i_avg = 0;
@@ -1199,13 +924,13 @@
 
 		/* d. */
 		rot_tone_i_b = (iqcal_tone_i * iqcal_tone_i +
-						iqcal_tone_q * iqcal_tone_q) / 1024;
+					iqcal_tone_q * iqcal_tone_q) / 1024;
 		rot_tone_q_b = (iqcal_tone_i * iqcal_tone_q * (-1) +
-						iqcal_tone_q * iqcal_tone_i) / 1024;
+					iqcal_tone_q * iqcal_tone_i) / 1024;
 		rot_image_i_b = (iqcal_image_i * iqcal_tone_i -
-						 iqcal_image_q * iqcal_tone_q) / 1024;
+					iqcal_image_q * iqcal_tone_q) / 1024;
 		rot_image_q_b = (iqcal_image_i * iqcal_tone_q +
-						 iqcal_image_q * iqcal_tone_i) / 1024;
+					iqcal_image_q * iqcal_tone_i) / 1024;
 
 		PHY_DEBUG(("[CAL]    ** rot_tone_i_b  = %d\n", rot_tone_i_b));
 		PHY_DEBUG(("[CAL]    ** rot_tone_q_b  = %d\n", rot_tone_q_b));
@@ -1225,8 +950,10 @@
 		b_2 = (rot_image_q_b * 32768) / rot_tone_i_b -
 			phw_data->iq_rsdl_phase_tx_d2;
 
-		PHY_DEBUG(("[CAL]    ** iq_rsdl_gain_tx_d2 = %d\n", phw_data->iq_rsdl_gain_tx_d2));
-		PHY_DEBUG(("[CAL]    ** iq_rsdl_phase_tx_d2= %d\n", phw_data->iq_rsdl_phase_tx_d2));
+		PHY_DEBUG(("[CAL]    ** iq_rsdl_gain_tx_d2 = %d\n",
+			   phw_data->iq_rsdl_gain_tx_d2));
+		PHY_DEBUG(("[CAL]    ** iq_rsdl_phase_tx_d2= %d\n",
+			   phw_data->iq_rsdl_phase_tx_d2));
 		PHY_DEBUG(("[CAL]    ***** EPSILON/2 = %d\n", a_2));
 		PHY_DEBUG(("[CAL]    ***** THETA/2   = %d\n", b_2));
 
@@ -1272,7 +999,8 @@
 
 		/* e. */
 		pwr_tone = (iqcal_tone_i*iqcal_tone_i + iqcal_tone_q*iqcal_tone_q);
-		pwr_image = (iqcal_image_i*iqcal_image_i + iqcal_image_q*iqcal_image_q)*factor;
+		pwr_image = (iqcal_image_i*iqcal_image_i +
+			     iqcal_image_q*iqcal_image_q)*factor;
 
 		PHY_DEBUG(("[CAL]    ** pwr_tone  = %d\n", pwr_tone));
 		PHY_DEBUG(("[CAL]    ** pwr_image  = %d\n", pwr_image));
@@ -1371,7 +1099,7 @@
 /*************************************************/
 
 /***************************************************************/
-void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
+static void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 {
 /* figo 20050523 marked this flag for can't compile for release */
 #ifdef _DEBUG
@@ -1569,7 +1297,8 @@
 
 		sqsum = iqcal_tone_i0*iqcal_tone_i0 + iqcal_tone_q0*iqcal_tone_q0;
 		iq_mag_0_tx = (s32) _sqrt(sqsum);
-		PHY_DEBUG(("[CAL]    ** auto_adjust_txvga_for_iq_mag_0_tx=%d\n", iq_mag_0_tx));
+		PHY_DEBUG(("[CAL]    ** auto_adjust_txvga_for_iq_mag_0_tx=%d\n",
+			   iq_mag_0_tx));
 
 		if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750)
 			break;
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 75b7752..5fd4c4a 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -43,7 +43,7 @@
  */
 
 /* MAX2825 (pure b/g) */
-u32 max2825_rf_data[] = {
+static u32 max2825_rf_data[] = {
 	(0x00<<18) | 0x000a2,
 	(0x01<<18) | 0x21cc0,
 	(0x02<<18) | 0x13806,
@@ -59,7 +59,7 @@
 	(0x0C<<18) | 0x0c100   /* 11a: 0x0c300, 11g: 0x0c100 */
 };
 
-u32 max2825_channel_data_24[][3] = {
+static u32 max2825_channel_data_24[][3] = {
 	{(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 01 */
 	{(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 02 */
 	{(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 03 */
@@ -76,11 +76,11 @@
 	{(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}  /* channel 14 (2484MHz) */
 };
 
-u32 max2825_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+static u32 max2825_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
 
 /* ========================================== */
 /* MAX2827 (a/b/g) */
-u32 max2827_rf_data[] = {
+static u32 max2827_rf_data[] = {
 	(0x00 << 18) | 0x000a2,
 	(0x01 << 18) | 0x21cc0,
 	(0x02 << 18) | 0x13806,
@@ -96,7 +96,7 @@
 	(0x0C << 18) | 0x0c100   /* 11a: 0x0c300, 11g: 0x0c100 */
 };
 
-u32 max2827_channel_data_24[][3] = {
+static u32 max2827_channel_data_24[][3] = {
 	{(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
 	{(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
 	{(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
@@ -113,7 +113,7 @@
 	{(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}  /* channel 14 (2484MHz) */
 };
 
-u32 max2827_channel_data_50[][3] = {
+static u32 max2827_channel_data_50[][3] = {
 	{(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 36 */
 	{(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 40 */
 	{(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6}, /* channel 44 */
@@ -124,12 +124,12 @@
 	{(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6}  /* channel 64 */
 };
 
-u32 max2827_power_data_24[] = {(0x0C << 18) | 0x0C000, (0x0C << 18) | 0x0D600, (0x0C << 18) | 0x0C100};
-u32 max2827_power_data_50[] = {(0x0C << 18) | 0x0C400, (0x0C << 18) | 0x0D500, (0x0C << 18) | 0x0C300};
+static u32 max2827_power_data_24[] = {(0x0C << 18) | 0x0C000, (0x0C << 18) | 0x0D600, (0x0C << 18) | 0x0C100};
+static u32 max2827_power_data_50[] = {(0x0C << 18) | 0x0C400, (0x0C << 18) | 0x0D500, (0x0C << 18) | 0x0C300};
 
 /* ======================================================= */
 /* MAX2828 (a/b/g) */
-u32 max2828_rf_data[] = {
+static u32 max2828_rf_data[] = {
 	(0x00 << 18) | 0x000a2,
 	(0x01 << 18) | 0x21cc0,
 	(0x02 << 18) | 0x13806,
@@ -145,7 +145,7 @@
 	(0x0C << 18) | 0x0c100   /* 11a: 0x0c300, 11g: 0x0c100 */
 };
 
-u32 max2828_channel_data_24[][3] = {
+static u32 max2828_channel_data_24[][3] = {
 	{(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
 	{(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
 	{(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
@@ -162,7 +162,7 @@
 	{(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}  /* channel 14 (2484MHz) */
 };
 
-u32 max2828_channel_data_50[][3] = {
+static u32 max2828_channel_data_50[][3] = {
 	{(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 36 */
 	{(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 40 */
 	{(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 44 */
@@ -173,12 +173,12 @@
 	{(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}  /* channel 64 */
 };
 
-u32 max2828_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
-u32 max2828_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+static u32 max2828_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+static u32 max2828_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
 
 /* ========================================================== */
 /* MAX2829 (a/b/g) */
-u32 max2829_rf_data[] = {
+static u32 max2829_rf_data[] = {
 	(0x00 << 18) | 0x000a2,
 	(0x01 << 18) | 0x23520,
 	(0x02 << 18) | 0x13802,
@@ -194,7 +194,7 @@
 	(0x0C << 18) | 0x0F300 /* TXVGA=51, (MAX-6 dB) */
 };
 
-u32 max2829_channel_data_24[][3] = {
+static u32 max2829_channel_data_24[][3] = {
 	{(3 << 18) | 0x30142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6},  /* 01 (2412MHz) */
 	{(3 << 18) | 0x32141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6},  /* 02 (2417MHz) */
 	{(3 << 18) | 0x32143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6},  /* 03 (2422MHz) */
@@ -211,7 +211,7 @@
 	{(3 << 18) | 0x32941, (4 << 18) | 0x09999, (5 << 18) | 0x289C6},  /* 14 (2484MHz) */
 };
 
-u32 max2829_channel_data_50[][4] = {
+static u32 max2829_channel_data_50[][4] = {
 	{36, (3 << 18) | 0x33cc3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 36 (5.180GHz) */
 	{40, (3 << 18) | 0x302c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 40 (5.200GHz) */
 	{44, (3 << 18) | 0x302c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 44 (5.220GHz) */
@@ -296,51 +296,6 @@
  * 0x0c 0x0c000
  * ====================================================================
  */
-u32 maxim_317_rf_data[] = {
-	(0x00 << 18) | 0x000a2,
-	(0x01 << 18) | 0x214c0,
-	(0x02 << 18) | 0x13802,
-	(0x03 << 18) | 0x30143,
-	(0x04 << 18) | 0x0accc,
-	(0x05 << 18) | 0x28986,
-	(0x06 << 18) | 0x18008,
-	(0x07 << 18) | 0x38400,
-	(0x08 << 18) | 0x05108,
-	(0x09 << 18) | 0x27ff8,
-	(0x0A << 18) | 0x14000,
-	(0x0B << 18) | 0x37f99,
-	(0x0C << 18) | 0x0c000
-};
-
-u32 maxim_317_channel_data_24[][3] = {
-	{(0x03 << 18) | 0x30143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 01 */
-	{(0x03 << 18) | 0x32140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 02 */
-	{(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 03 */
-	{(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 04 */
-	{(0x03 << 18) | 0x31140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 05 */
-	{(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 06 */
-	{(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 07 */
-	{(0x03 << 18) | 0x33140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 08 */
-	{(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 09 */
-	{(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 10 */
-	{(0x03 << 18) | 0x30940, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 11 */
-	{(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 12 */
-	{(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}  /* channe1 13 */
-};
-
-u32 maxim_317_channel_data_50[][3] = {
-	{(0x03 << 18) | 0x33cc0, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2a986}, /* channel 36 */
-	{(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2a986}, /* channel 40 */
-	{(0x03 << 18) | 0x302c3, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x2a986}, /* channel 44 */
-	{(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09666, (0x05 << 18) | 0x2a986}, /* channel 48 */
-	{(0x03 << 18) | 0x312c2, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x2a986}, /* channel 52 */
-	{(0x03 << 18) | 0x332c0, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2a99e}, /* channel 56 */
-	{(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2a99e}, /* channel 60 */
-	{(0x03 << 18) | 0x30ac3, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x2a99e}  /* channel 64 */
-};
-
-u32 maxim_317_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
-u32 maxim_317_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
 
 /*
  * ===================================================================
@@ -388,7 +343,7 @@
  * 0x0f 0xf00a0 ; Restore Initial Setting
  * ==================================================================
  */
-u32 al2230_rf_data[] = {
+static u32 al2230_rf_data[] = {
 	(0x00 << 20) | 0x09EFC,
 	(0x01 << 20) | 0x8CCCC,
 	(0x02 << 20) | 0x40058,
@@ -406,7 +361,7 @@
 	(0x0F << 20) | 0xF01A0
 };
 
-u32 al2230s_rf_data[] = {
+static u32 al2230s_rf_data[] = {
 	(0x00 << 20) | 0x09EFC,
 	(0x01 << 20) | 0x8CCCC,
 	(0x02 << 20) | 0x40058,
@@ -424,7 +379,7 @@
 	(0x0F << 20) | 0xF01A0
 };
 
-u32 al2230_channel_data_24[][2] = {
+static u32 al2230_channel_data_24[][2] = {
 	{(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 01 */
 	{(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 02 */
 	{(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 03 */
@@ -446,7 +401,7 @@
 #define AIROHA_TXVGA_MIDDLE_INDEX	12	/* Index for 0x96602 */
 #define AIROHA_TXVGA_HIGH_INDEX		8	/* Index for 0x97602 1.0.24.0 1.0.28.0 */
 
-u32 al2230_txvga_data[][2] = {
+static u32 al2230_txvga_data[][2] = {
 	/* value , index */
 	{0x090202, 0},
 	{0x094202, 2},
@@ -497,7 +452,7 @@
  */
 
 /* channel independent registers: */
-u32 al7230_rf_data_24[]	= {
+static u32 al7230_rf_data_24[]	= {
 	(0x00 << 24) | 0x003790,
 	(0x01 << 24) | 0x133331,
 	(0x02 << 24) | 0x841FF2,
@@ -516,7 +471,7 @@
 	(0x0F << 24) | 0x1ABA8F
 };
 
-u32 al7230_channel_data_24[][2] = {
+static u32 al7230_channel_data_24[][2] = {
 	{(0x00 << 24) | 0x003790, (0x01 << 24) | 0x133331}, /* channe1 01 */
 	{(0x00 << 24) | 0x003790, (0x01 << 24) | 0x1B3331}, /* channe1 02 */
 	{(0x00 << 24) | 0x003790, (0x01 << 24) | 0x033331}, /* channe1 03 */
@@ -534,7 +489,7 @@
 };
 
 /* channel independent registers: */
-u32 al7230_rf_data_50[]	= {
+static u32 al7230_rf_data_50[]	= {
 	(0x00 << 24) | 0x0FF520,
 	(0x01 << 24) | 0x000001,
 	(0x02 << 24) | 0x451FE2,
@@ -553,7 +508,7 @@
 	(0x0F << 24) | 0x12BACF  /* 5Ghz default state */
 };
 
-u32 al7230_channel_data_5[][4] = {
+static u32 al7230_channel_data_5[][4] = {
 	/* channel dependent registers: 0x00, 0x01 and 0x04 */
 	/* 11J =========== */
 	{184, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 184 */
@@ -603,7 +558,7 @@
  */
 
 /* TXVGA Mapping Table <=== Register 0x0B */
-u32 al7230_txvga_data[][2] = {
+static u32 al7230_txvga_data[][2] = {
 	{0x08040B, 0}, /* TXVGA = 0; */
 	{0x08041B, 1}, /* TXVGA = 1; */
 	{0x08042B, 2}, /* TXVGA = 2; */
@@ -675,7 +630,7 @@
  * W89RF242 RFIC SPI programming initial data
  * Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b
  */
-u32 w89rf242_rf_data[] = {
+static u32 w89rf242_rf_data[] = {
 	(0x00 << 24) | 0xF86100, /* 3E184; MODA  (0x00) -- Normal mode ; calibration off */
 	(0x01 << 24) | 0xEFFFC2, /* 3BFFF; MODB  (0x01) -- turn off RSSI, and other circuits are turned on */
 	(0x02 << 24) | 0x102504, /* 04094; FSET  (0x02) -- default 20MHz crystal ; Icmp=1.5mA */
@@ -696,7 +651,7 @@
 	(0x12 << 24) | 0x000024  /* TMODC (0x12) -- Turn OFF Temperature sensor */
 };
 
-u32 w89rf242_channel_data_24[][2] = {
+static u32 w89rf242_channel_data_24[][2] = {
 	{(0x03 << 24) | 0x025B06, (0x04 << 24) | 0x080408}, /* channe1 01 */
 	{(0x03 << 24) | 0x025C46, (0x04 << 24) | 0x080408}, /* channe1 02 */
 	{(0x03 << 24) | 0x025D86, (0x04 << 24) | 0x080408}, /* channe1 03 */
@@ -713,9 +668,7 @@
 	{(0x03 << 24) | 0x026D06, (0x04 << 24) | 0x080408}  /* channe1 14 */
 };
 
-u32 w89rf242_power_data_24[] = {(0x05 << 24) | 0x24C48A, (0x05 << 24) | 0x24C48A, (0x05 << 24) | 0x24C48A};
-
-u32 w89rf242_txvga_old_mapping[][2] = {
+static u32 w89rf242_txvga_old_mapping[][2] = {
 	{0, 0} , /* New <-> Old */
 	{1, 1} ,
 	{2, 2} ,
@@ -738,7 +691,7 @@
 	{34, 19},
 };
 
-u32 w89rf242_txvga_data[][5] = {
+static u32 w89rf242_txvga_data[][5] = {
 	/* low gain mode */
 	{(0x05 << 24) | 0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131}, /* min gain */
 	{(0x05 << 24) | 0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131},
@@ -920,7 +873,7 @@
 	Wb35Reg_WriteSync(pHwData, 0x03f8, 0x7ff);
 }
 
-static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp, 
+static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp,
 					char number)
 {
 	u8	i;
@@ -930,7 +883,7 @@
 	}
 }
 
-static void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp, 
+static void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp,
 					char number)
 {
 	u8	i;
@@ -1088,7 +1041,7 @@
 		msleep(5);
 
 		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp) ;
+		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
 		pHwData->reg.BB50 &= ~0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
@@ -1620,13 +1573,13 @@
 		reg->SQ3_filter[i] = 0x2f; /* half of Bit 0 ~ 6 */
 }
 
-static inline void set_tx_power_per_channel_max2829(struct hw_data *pHwData,  
+static inline void set_tx_power_per_channel_max2829(struct hw_data *pHwData,
 						struct chan_info Channel)
 {
 	RFSynthesizer_SetPowerIndex(pHwData, 100);
 }
 
-static void set_tx_power_per_channel_al2230(struct hw_data *pHwData,  
+static void set_tx_power_per_channel_al2230(struct hw_data *pHwData,
 					struct chan_info Channel)
 {
 	u8	index = 100;
@@ -1636,7 +1589,7 @@
 	RFSynthesizer_SetPowerIndex(pHwData, index);
 }
 
-static void set_tx_power_per_channel_al7230(struct hw_data *pHwData,  
+static void set_tx_power_per_channel_al7230(struct hw_data *pHwData,
 					struct chan_info Channel)
 {
 	u8	i, index = 100;
@@ -1660,7 +1613,7 @@
 	RFSynthesizer_SetPowerIndex(pHwData, index);
 }
 
-static void set_tx_power_per_channel_wb242(struct hw_data *pHwData,  
+static void set_tx_power_per_channel_wb242(struct hw_data *pHwData,
 					struct chan_info Channel)
 {
 	u8	index = 100;
@@ -2096,7 +2049,7 @@
 	pltmp[5] = reg->M38_MacControl;
 
 	/* M3C */
-	tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST ;
+	tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST;
 	reg->M3C_MacControl = tmp;
 	pltmp[6] = tmp;
 
diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c
index 30a77cc..708c5b0 100644
--- a/drivers/staging/winbond/wb35tx.c
+++ b/drivers/staging/winbond/wb35tx.c
@@ -180,7 +180,7 @@
 {
 	struct hw_data *pHwData = &adapter->sHwData;
 	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-	unsigned char Trigger = false;
+	bool Trigger = false;
 
 	if (pWb35Tx->TxTimer > TimeCount)
 		Trigger = true;
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 3fa1ae4..07891a3 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -122,16 +122,16 @@
 {
 	struct wbsoft_priv *priv = dev->priv;
 
-	if (priv->sMlmeFrame.IsInUsed != PACKET_FREE_TO_USE) {
+	if (priv->sMlmeFrame.is_in_used != PACKET_FREE_TO_USE) {
 		priv->sMlmeFrame.wNumTxMMPDUDiscarded++;
 		kfree_skb(skb);
 		return;
 	}
 
-	priv->sMlmeFrame.IsInUsed = PACKET_COME_FROM_MLME;
+	priv->sMlmeFrame.is_in_used = PACKET_COME_FROM_MLME;
 
 	priv->sMlmeFrame.pMMPDU		= skb->data;
-	priv->sMlmeFrame.DataType	= FRAME_TYPE_802_11_MANAGEMENT;
+	priv->sMlmeFrame.data_type	= FRAME_TYPE_802_11_MANAGEMENT;
 	priv->sMlmeFrame.len		= skb->len;
 	priv->sMlmeFrame.wNumTxMMPDU++;
 
diff --git a/drivers/staging/wlags49_h2/hcf.h b/drivers/staging/wlags49_h2/hcf.h
index 2abeaa1..71b4465 100644
--- a/drivers/staging/wlags49_h2/hcf.h
+++ b/drivers/staging/wlags49_h2/hcf.h
@@ -372,22 +372,22 @@
 /**********************   W C I    F U N C T I O N S    P R O T O T Y P E S   ******************************/
 /***********************************************************************************************************/
 
-EXTERN_C int		 hcf_action			(IFBP ifbp, hcf_16 cmd );
-EXTERN_C int		 hcf_connect		(IFBP ifbp, hcf_io io_base );
-EXTERN_C int		 hcf_get_info		(IFBP ifbp, LTVP ltvp );
-EXTERN_C int		 hcf_service_nic	(IFBP ifbp, wci_bufp bufp, unsigned int len );
-EXTERN_C int		 hcf_cntl			(IFBP ifbp, hcf_16 cmd );
-EXTERN_C int		 hcf_put_info		(IFBP ifbp, LTVP ltvp );
-EXTERN_C int		 hcf_rcv_msg		(IFBP ifbp, DESC_STRCT *descp, unsigned int offset );
-EXTERN_C int		 hcf_send_msg       (IFBP ifbp, DESC_STRCT *dp, hcf_16 tx_cntl );
+EXTERN_C int hcf_action(IFBP ifbp, hcf_16 cmd);
+EXTERN_C int hcf_connect(IFBP ifbp, hcf_io io_base);
+EXTERN_C int hcf_get_info(IFBP ifbp, LTVP ltvp);
+EXTERN_C int hcf_service_nic(IFBP ifbp, wci_bufp bufp, unsigned int len);
+EXTERN_C int hcf_cntl(IFBP ifbp, hcf_16 cmd);
+EXTERN_C int hcf_put_info(IFBP ifbp, LTVP ltvp);
+EXTERN_C int hcf_rcv_msg(IFBP ifbp, DESC_STRCT *descp, unsigned int offset);
+EXTERN_C int hcf_send_msg(IFBP ifbp, DESC_STRCT *dp, hcf_16 tx_cntl);
 #if HCF_DMA
-EXTERN_C void		 hcf_dma_tx_put 	(IFBP ifbp, DESC_STRCT *d, hcf_16 tx_cntl );
+EXTERN_C void hcf_dma_tx_put(IFBP ifbp, DESC_STRCT *d, hcf_16 tx_cntl);
 EXTERN_C DESC_STRCT* hcf_dma_tx_get		(IFBP ifbp );
 EXTERN_C DESC_STRCT* hcf_dma_rx_get		(IFBP ifbp );
-EXTERN_C void		 hcf_dma_rx_put		(IFBP ifbp, DESC_STRCT *d );
+EXTERN_C void hcf_dma_rx_put(IFBP ifbp, DESC_STRCT *d);
 #endif // HCF_DMA
 #if (HCF_ASSERT) & HCF_ASSERT_LNK_MSF_RTN
-EXTERN_C void		 msf_assert	 		(unsigned int line_number, hcf_16 trace, hcf_32 qual );
+EXTERN_C void msf_assert(unsigned int line_number, hcf_16 trace, hcf_32 qual);
 #endif // HCF_ASSERT_LNK_MSF_RTN
 
 #endif  // HCF_H
diff --git a/drivers/staging/wlags49_h2/sta_h2.c b/drivers/staging/wlags49_h2/sta_h2.c
index 19bed81..25ac76f 100644
--- a/drivers/staging/wlags49_h2/sta_h2.c
+++ b/drivers/staging/wlags49_h2/sta_h2.c
@@ -4472,8 +4472,8 @@
 	"FUPU7D37dhfwci\001C",			/* signature, <format number>, C/Bin type */
 	(CFG_PROG_STRCT *) fw_image_code,
 	0x000F368E,
-	00000000,					/* (dummy) pdaplug */
-	00000000,					/* (dummy) priplug */
+	NULL,					/* (dummy) pdaplug */
+	NULL,					/* (dummy) priplug */
 	(CFG_RANGE20_STRCT *) fw_image_infocompat,
 	(CFG_IDENTITY_STRCT *) fw_image_infoidentity,
 };
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index f1bce18..a4fd5c4 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -98,10 +98,10 @@
 
 
 /* The interface functions, called by the cfg80211 layer */
-int prism2_change_virtual_intf(struct wiphy *wiphy,
-			       struct net_device *dev,
-			       enum nl80211_iftype type, u32 *flags,
-			       struct vif_params *params)
+static int prism2_change_virtual_intf(struct wiphy *wiphy,
+				      struct net_device *dev,
+				      enum nl80211_iftype type, u32 *flags,
+				      struct vif_params *params)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	u32 data;
@@ -122,7 +122,7 @@
 		data = 1;
 		break;
 	default:
-		printk(KERN_WARNING "Operation mode: %d not support\n", type);
+		netdev_warn(dev, "Operation mode: %d not support\n", type);
 		return -EOPNOTSUPP;
 	}
 
@@ -140,9 +140,9 @@
 	return err;
 }
 
-int prism2_add_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, bool pairwise, const u8 *mac_addr,
-		   struct key_params *params)
+static int prism2_add_key(struct wiphy *wiphy, struct net_device *dev,
+			  u8 key_index, bool pairwise, const u8 *mac_addr,
+			  struct key_params *params)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	u32 did;
@@ -199,9 +199,10 @@
 	return err;
 }
 
-int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, bool pairwise, const u8 *mac_addr, void *cookie,
-		   void (*callback)(void *cookie, struct key_params*))
+static int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
+			  u8 key_index, bool pairwise,
+			  const u8 *mac_addr, void *cookie,
+			  void (*callback)(void *cookie, struct key_params*))
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	struct key_params params;
@@ -228,8 +229,8 @@
 	return 0;
 }
 
-int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, bool pairwise, const u8 *mac_addr)
+static int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
+			  u8 key_index, bool pairwise, const u8 *mac_addr)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	u32 did;
@@ -274,8 +275,8 @@
 	return err;
 }
 
-int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
-			   u8 key_index, bool unicast, bool multicast)
+static int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
+				  u8 key_index, bool unicast, bool multicast)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 
@@ -293,8 +294,8 @@
 }
 
 
-int prism2_get_station(struct wiphy *wiphy, struct net_device *dev,
-		       u8 *mac, struct station_info *sinfo)
+static int prism2_get_station(struct wiphy *wiphy, struct net_device *dev,
+			      u8 *mac, struct station_info *sinfo)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	struct p80211msg_lnxreq_commsquality quality;
@@ -327,7 +328,7 @@
 	return result;
 }
 
-int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
+static int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 {
 	struct net_device *dev;
 	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
@@ -352,7 +353,7 @@
 		return -EBUSY;
 
 	if (wlandev->macmode == WLAN_MACMODE_ESS_AP) {
-		printk(KERN_ERR "Can't scan in AP mode\n");
+		netdev_err(dev, "Can't scan in AP mode\n");
 		return -EOPNOTSUPP;
 	}
 
@@ -436,7 +437,7 @@
 	return err;
 }
 
-int prism2_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+static int prism2_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 {
 	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
 	wlandevice_t *wlandev = priv->wlandev;
@@ -478,8 +479,8 @@
 	return err;
 }
 
-int prism2_connect(struct wiphy *wiphy, struct net_device *dev,
-		   struct cfg80211_connect_params *sme)
+static int prism2_connect(struct wiphy *wiphy, struct net_device *dev,
+			  struct cfg80211_connect_params *sme)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	struct ieee80211_channel *channel = sme->channel;
@@ -510,7 +511,7 @@
 		((sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) && is_wep))
 			msg_join.authtype.data = P80211ENUM_authalg_sharedkey;
 	else
-		printk(KERN_WARNING
+		netdev_warn(dev,
 			"Unhandled authorisation type for connect (%d)\n",
 			sme->auth_type);
 
@@ -602,8 +603,8 @@
 	return err;
 }
 
-int prism2_disconnect(struct wiphy *wiphy, struct net_device *dev,
-		      u16 reason_code)
+static int prism2_disconnect(struct wiphy *wiphy, struct net_device *dev,
+			     u16 reason_code)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	struct p80211msg_lnxreq_autojoin msg_join;
@@ -626,20 +627,20 @@
 }
 
 
-int prism2_join_ibss(struct wiphy *wiphy, struct net_device *dev,
-		     struct cfg80211_ibss_params *params)
+static int prism2_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+			    struct cfg80211_ibss_params *params)
 {
 	return -EOPNOTSUPP;
 }
 
-int prism2_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+static int prism2_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
 {
 	return -EOPNOTSUPP;
 }
 
 
-int prism2_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
-			enum nl80211_tx_power_setting type, int mbm)
+static int prism2_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
+			       enum nl80211_tx_power_setting type, int mbm)
 {
 	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
 	wlandevice_t *wlandev = priv->wlandev;
@@ -665,8 +666,8 @@
 	return err;
 }
 
-int prism2_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
-			int *dbm)
+static int prism2_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
+			       int *dbm)
 {
 	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
 	wlandevice_t *wlandev = priv->wlandev;
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index c1a8cb6..5b8b094 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -355,7 +355,7 @@
 
 		/* Check whether we need to reset the RX pipe */
 		if (result == -EPIPE) {
-			printk(KERN_WARNING
+			netdev_warn(hw->wlandev->netdev,
 			       "%s rx pipe stalled: requesting reset\n",
 			       hw->wlandev->netdev->name);
 			if (!test_and_set_bit(WORK_RX_HALT, &hw->usb_flags))
@@ -405,7 +405,7 @@
 
 			/* Test whether we need to reset the TX pipe */
 			if (result == -EPIPE) {
-				printk(KERN_WARNING
+				netdev_warn(hw->wlandev->netdev,
 				       "%s tx pipe stalled: requesting reset\n",
 				       netdev->name);
 				set_bit(WORK_TX_HALT, &hw->usb_flags);
@@ -454,11 +454,11 @@
 
 		ret = usb_clear_halt(hw->usb, hw->endp_in);
 		if (ret != 0) {
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 			       "Failed to clear rx pipe for %s: err=%d\n",
 			       netdev->name, ret);
 		} else {
-			printk(KERN_INFO "%s rx pipe reset complete.\n",
+			netdev_info(hw->wlandev->netdev, "%s rx pipe reset complete.\n",
 			       netdev->name);
 			clear_bit(WORK_RX_HALT, &hw->usb_flags);
 			set_bit(WORK_RX_RESUME, &hw->usb_flags);
@@ -471,7 +471,7 @@
 
 		ret = submit_rx_urb(hw, GFP_KERNEL);
 		if (ret != 0) {
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 			       "Failed to resume %s rx pipe.\n", netdev->name);
 		} else {
 			clear_bit(WORK_RX_RESUME, &hw->usb_flags);
@@ -485,11 +485,11 @@
 		usb_kill_urb(&hw->tx_urb);
 		ret = usb_clear_halt(hw->usb, hw->endp_out);
 		if (ret != 0) {
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 			       "Failed to clear tx pipe for %s: err=%d\n",
 			       netdev->name, ret);
 		} else {
-			printk(KERN_INFO "%s tx pipe reset complete.\n",
+			netdev_info(hw->wlandev->netdev, "%s tx pipe reset complete.\n",
 			       netdev->name);
 			clear_bit(WORK_TX_HALT, &hw->usb_flags);
 			set_bit(WORK_TX_RESUME, &hw->usb_flags);
@@ -1211,7 +1211,7 @@
 
 	result = usb_reset_device(hw->usb);
 	if (result < 0) {
-		printk(KERN_ERR "usb_reset_device() failed, result=%d.\n",
+		netdev_err(hw->wlandev->netdev, "usb_reset_device() failed, result=%d.\n",
 		       result);
 	}
 
@@ -1311,7 +1311,7 @@
 		if (ctlx->state == CTLX_COMPLETE) {
 			result = completor->complete(completor);
 		} else {
-			printk(KERN_WARNING "CTLX[%d] error: state(%s)\n",
+			netdev_warn(hw->wlandev->netdev, "CTLX[%d] error: state(%s)\n",
 			       le16_to_cpu(ctlx->outbuf.type),
 			       ctlxstr(ctlx->state));
 			result = -EIO;
@@ -2018,7 +2018,7 @@
 	if (hw->dlstate != HFA384x_DLSTATE_FLASHENABLED)
 		return -EINVAL;
 
-	printk(KERN_INFO "Download %d bytes to flash @0x%06x\n", len, daddr);
+	netdev_info(hw->wlandev->netdev, "Download %d bytes to flash @0x%06x\n", len, daddr);
 
 	/* Convert to flat address for arithmetic */
 	/* NOTE: dlbuffer RID stores the address in AUX format */
@@ -2028,7 +2028,7 @@
 		 hw->bufinfo.page, hw->bufinfo.offset, dlbufaddr);
 
 #if 0
-	printk(KERN_WARNING "dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr,
+	netdev_warn(hw->wlandev->netdev, "dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr,
 	       hw->bufinfo.len, hw->dltimeout);
 #endif
 	/* Calculations to determine how many fills of the dlbuffer to do
@@ -2055,14 +2055,14 @@
 		burnlo = HFA384x_ADDR_CMD_MKOFF(burndaddr);
 		burnhi = HFA384x_ADDR_CMD_MKPAGE(burndaddr);
 
-		printk(KERN_INFO "Writing %d bytes to flash @0x%06x\n",
+		netdev_info(hw->wlandev->netdev, "Writing %d bytes to flash @0x%06x\n",
 		       burnlen, burndaddr);
 
 		/* Set the download mode */
 		result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NV,
 					      burnlo, burnhi, burnlen);
 		if (result) {
-			printk(KERN_ERR "download(NV,lo=%x,hi=%x,len=%x) "
+			netdev_err(hw->wlandev->netdev, "download(NV,lo=%x,hi=%x,len=%x) "
 			       "cmd failed, result=%d. Aborting d/l\n",
 			       burnlo, burnhi, burnlen, result);
 			goto exit_proc;
@@ -2094,7 +2094,7 @@
 					      HFA384x_PROGMODE_NVWRITE,
 					      0, 0, 0);
 		if (result) {
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 			       "download(NVWRITE,lo=%x,hi=%x,len=%x) "
 			       "cmd failed, result=%d. Aborting d/l\n",
 			       burnlo, burnhi, burnlen, result);
@@ -2279,7 +2279,7 @@
 	/* Check that a port isn't active */
 	for (i = 0; i < HFA384x_PORTID_MAX; i++) {
 		if (hw->port_enabled[i]) {
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 			       "Can't download with a macport enabled.\n");
 			return -EINVAL;
 		}
@@ -2287,7 +2287,7 @@
 
 	/* Check that we're not already in a download state */
 	if (hw->dlstate != HFA384x_DLSTATE_DISABLED) {
-		printk(KERN_ERR "Download state not disabled.\n");
+		netdev_err(hw->wlandev->netdev, "Download state not disabled.\n");
 		return -EINVAL;
 	}
 
@@ -2352,7 +2352,7 @@
 	if (hw->dlstate != HFA384x_DLSTATE_RAMENABLED)
 		return -EINVAL;
 
-	printk(KERN_INFO "Writing %d bytes to ram @0x%06x\n", len, daddr);
+	netdev_info(hw->wlandev->netdev, "Writing %d bytes to ram @0x%06x\n", len, daddr);
 
 	/* How many dowmem calls?  */
 	nwrites = len / HFA384x_USB_RWMEM_MAXLEN;
@@ -2449,7 +2449,7 @@
 						len);
 
 		if (result) {
-			printk(KERN_WARNING
+			netdev_warn(hw->wlandev->netdev,
 			       "Read from index %zd failed, continuing\n", i);
 			continue;
 		}
@@ -2462,13 +2462,13 @@
 			pdrcode = le16_to_cpu(pda[currpdr + 1]);
 			/* Test the record length */
 			if (pdrlen > HFA384x_PDR_LEN_MAX || pdrlen == 0) {
-				printk(KERN_ERR "pdrlen invalid=%d\n", pdrlen);
+				netdev_err(hw->wlandev->netdev, "pdrlen invalid=%d\n", pdrlen);
 				pdaok = 0;
 				break;
 			}
 			/* Test the code */
 			if (!hfa384x_isgood_pdrcode(pdrcode)) {
-				printk(KERN_ERR "pdrcode invalid=%d\n",
+				netdev_err(hw->wlandev->netdev, "pdrcode invalid=%d\n",
 				       pdrcode);
 				pdaok = 0;
 				break;
@@ -2484,7 +2484,7 @@
 			}
 		}
 		if (pdaok) {
-			printk(KERN_INFO
+			netdev_info(hw->wlandev->netdev,
 			       "PDA Read from 0x%08x in %s space.\n",
 			       pdaloc[i].cardaddr,
 			       pdaloc[i].auxctl == 0 ? "EXTDS" :
@@ -2564,20 +2564,20 @@
 	result =
 	    usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_in, &status);
 	if (result < 0) {
-		printk(KERN_ERR "Cannot get bulk in endpoint status.\n");
+		netdev_err(hw->wlandev->netdev, "Cannot get bulk in endpoint status.\n");
 		goto done;
 	}
 	if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_in))
-		printk(KERN_ERR "Failed to reset bulk in endpoint.\n");
+		netdev_err(hw->wlandev->netdev, "Failed to reset bulk in endpoint.\n");
 
 	result =
 	    usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_out, &status);
 	if (result < 0) {
-		printk(KERN_ERR "Cannot get bulk out endpoint status.\n");
+		netdev_err(hw->wlandev->netdev, "Cannot get bulk out endpoint status.\n");
 		goto done;
 	}
 	if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_out))
-		printk(KERN_ERR "Failed to reset bulk out endpoint.\n");
+		netdev_err(hw->wlandev->netdev, "Failed to reset bulk out endpoint.\n");
 
 	/* Synchronous unlink, in case we're trying to restart the driver */
 	usb_kill_urb(&hw->rx_urb);
@@ -2585,7 +2585,7 @@
 	/* Post the IN urb */
 	result = submit_rx_urb(hw, GFP_KERNEL);
 	if (result != 0) {
-		printk(KERN_ERR
+		netdev_err(hw->wlandev->netdev,
 		       "Fatal, failed to submit RX URB, result=%d\n", result);
 		goto done;
 	}
@@ -2605,7 +2605,7 @@
 	result = result2 = hfa384x_cmd_initialize(hw);
 	if (result1 != 0) {
 		if (result2 != 0) {
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 				"cmd_initialize() failed on two attempts, results %d and %d\n",
 				result1, result2);
 			usb_kill_urb(&hw->rx_urb);
@@ -2616,9 +2616,9 @@
 			pr_debug("but second attempt succeeded. All should be ok\n");
 		}
 	} else if (result2 != 0) {
-		printk(KERN_WARNING "First cmd_initialize() succeeded, but second attempt failed (result=%d)\n",
+		netdev_warn(hw->wlandev->netdev, "First cmd_initialize() succeeded, but second attempt failed (result=%d)\n",
 			result2);
-		printk(KERN_WARNING
+		netdev_warn(hw->wlandev->netdev,
 		       "Most likely the card will be functional\n");
 		goto done;
 	}
@@ -2709,7 +2709,7 @@
 	char *ptr;
 
 	if (hw->tx_urb.status == -EINPROGRESS) {
-		printk(KERN_WARNING "TX URB already in use\n");
+		netdev_warn(hw->wlandev->netdev, "TX URB already in use\n");
 		result = 3;
 		goto exit;
 	}
@@ -2784,7 +2784,7 @@
 	result = 1;
 	ret = submit_tx_urb(hw, &hw->tx_urb, GFP_ATOMIC);
 	if (ret != 0) {
-		printk(KERN_ERR "submit_tx_urb() failed, error=%d\n", ret);
+		netdev_err(hw->wlandev->netdev, "submit_tx_urb() failed, error=%d\n", ret);
 		result = 3;
 	}
 
@@ -3009,7 +3009,7 @@
 		break;
 
 	default:
-		printk(KERN_ERR "CTLX[%d] not in a terminating state(%s)\n",
+		netdev_err(hw->wlandev->netdev, "CTLX[%d] not in a terminating state(%s)\n",
 		       le16_to_cpu(ctlx->outbuf.type), ctlxstr(ctlx->state));
 		break;
 	}			/* switch */
@@ -3091,7 +3091,7 @@
 			 * this CTLX back in the "pending" queue
 			 * and schedule a reset ...
 			 */
-			printk(KERN_WARNING
+			netdev_warn(hw->wlandev->netdev,
 			       "%s tx pipe stalled: requesting reset\n",
 			       hw->wlandev->netdev->name);
 			list_move(&head->list, &hw->ctlxq.pending);
@@ -3101,12 +3101,12 @@
 		}
 
 		if (result == -ESHUTDOWN) {
-			printk(KERN_WARNING "%s urb shutdown!\n",
+			netdev_warn(hw->wlandev->netdev, "%s urb shutdown!\n",
 			       hw->wlandev->netdev->name);
 			break;
 		}
 
-		printk(KERN_ERR "Failed to submit CTLX[%d]: error=%d\n",
+		netdev_err(hw->wlandev->netdev, "Failed to submit CTLX[%d]: error=%d\n",
 		       le16_to_cpu(head->outbuf.type), result);
 		unlocked_usbctlx_complete(hw, head);
 	}			/* while */
@@ -3173,7 +3173,7 @@
 		break;
 
 	case -EPIPE:
-		printk(KERN_WARNING "%s rx pipe stalled: requesting reset\n",
+		netdev_warn(hw->wlandev->netdev, "%s rx pipe stalled: requesting reset\n",
 		       wlandev->netdev->name);
 		if (!test_and_set_bit(WORK_RX_HALT, &hw->usb_flags))
 			schedule_work(&hw->usb_work);
@@ -3224,7 +3224,7 @@
 		result = submit_rx_urb(hw, GFP_ATOMIC);
 
 		if (result != 0) {
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 			       "Fatal, failed to resubmit rx_urb. error=%d\n",
 			       result);
 		}
@@ -3360,7 +3360,7 @@
 		 * Check that our message is what we're expecting ...
 		 */
 		if (ctlx->outbuf.type != intype) {
-			printk(KERN_WARNING
+			netdev_warn(hw->wlandev->netdev,
 			       "Expected IN[%d], received IN[%d] - ignored.\n",
 			       le16_to_cpu(ctlx->outbuf.type),
 			       le16_to_cpu(intype));
@@ -3396,7 +3396,7 @@
 			/*
 			 * Throw this CTLX away ...
 			 */
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 			       "Matched IN URB, CTLX[%d] in invalid state(%s)."
 			       " Discarded.\n",
 			       le16_to_cpu(ctlx->outbuf.type),
@@ -3534,7 +3534,7 @@
 		break;
 
 	default:
-		printk(KERN_WARNING "Received frame on unsupported port=%d\n",
+		netdev_warn(hw->wlandev->netdev, "Received frame on unsupported port=%d\n",
 		       HFA384x_RXSTATUS_MACPORT_GET(usbin->rxfrm.desc.status));
 		goto done;
 		break;
@@ -3596,7 +3596,7 @@
 
 	skb = dev_alloc_skb(skblen);
 	if (skb == NULL) {
-		printk(KERN_ERR
+		netdev_err(hw->wlandev->netdev,
 		       "alloc_skb failed trying to allocate %d bytes\n",
 		       skblen);
 		return;
@@ -3714,7 +3714,7 @@
 		case -EPIPE:
 			{
 				hfa384x_t *hw = wlandev->priv;
-				printk(KERN_WARNING
+				netdev_warn(hw->wlandev->netdev,
 				       "%s tx pipe stalled: requesting reset\n",
 				       wlandev->netdev->name);
 				if (!test_and_set_bit
@@ -3747,7 +3747,7 @@
 			break;
 
 		default:
-			printk(KERN_INFO "unknown urb->status=%d\n",
+			netdev_info(wlandev->netdev, "unknown urb->status=%d\n",
 			       urb->status);
 			++(wlandev->linux_stats.tx_errors);
 			break;
@@ -3841,7 +3841,7 @@
 
 		default:
 			/* This is NOT a valid CTLX "success" state! */
-			printk(KERN_ERR
+			netdev_err(hw->wlandev->netdev,
 				"Illegal CTLX[%d] success state(%s, %d) in OUT URB\n",
 				le16_to_cpu(ctlx->outbuf.type),
 				ctlxstr(ctlx->state), urb->status);
@@ -3851,7 +3851,7 @@
 		/* If the pipe has stalled then we need to reset it */
 		if ((urb->status == -EPIPE) &&
 		    !test_and_set_bit(WORK_TX_HALT, &hw->usb_flags)) {
-			printk(KERN_WARNING
+			netdev_warn(hw->wlandev->netdev,
 			       "%s tx pipe stalled: requesting reset\n",
 			       hw->wlandev->netdev->name);
 			schedule_work(&hw->usb_work);
diff --git a/drivers/staging/wlan-ng/p80211netdev.h b/drivers/staging/wlan-ng/p80211netdev.h
index 2fecca2..2e0bd24 100644
--- a/drivers/staging/wlan-ng/p80211netdev.h
+++ b/drivers/staging/wlan-ng/p80211netdev.h
@@ -138,7 +138,7 @@
 } p80211_frmrx_t;
 
 /* called by /proc/net/wireless */
-struct iw_statistics *p80211wext_get_wireless_stats(netdevice_t * dev);
+struct iw_statistics *p80211wext_get_wireless_stats(netdevice_t *dev);
 /* wireless extensions' ioctls */
 extern struct iw_handler_def p80211wext_handler_def;
 int p80211wext_event_associated(struct wlandevice *wlandev, int assoc);
diff --git a/drivers/staging/wlan-ng/p80211wep.c b/drivers/staging/wlan-ng/p80211wep.c
index 77e50a4..c4fabad 100644
--- a/drivers/staging/wlan-ng/p80211wep.c
+++ b/drivers/staging/wlan-ng/p80211wep.c
@@ -134,7 +134,7 @@
 		return -1;
 
 #ifdef WEP_DEBUG
-	printk(KERN_DEBUG "WEP key %d len %d = %*phC\n", keynum, keylen,
+	pr_debug("WEP key %d len %d = %*phC\n", keynum, keylen,
 			  8, key);
 #endif
 
@@ -182,7 +182,7 @@
 	keylen += 3;		/* add in IV bytes */
 
 #ifdef WEP_DEBUG
-	printk(KERN_DEBUG "D %d: %*ph (%d %d) %*phC\n", len, 3, key,
+	pr_debug("D %d: %*ph (%d %d) %*phC\n", len, 3, key,
 			  keyidx, keylen, 5, key + 3);
 #endif
 
@@ -259,7 +259,7 @@
 	keylen += 3;		/* add in IV bytes */
 
 #ifdef WEP_DEBUG
-	printk(KERN_DEBUG "E %d (%d/%d %d) %*ph %*phC\n", len,
+	pr_debug("E %d (%d/%d %d) %*ph %*phC\n", len,
 			  iv[3], keynum, keylen, 3, key, 5, key + 3);
 #endif
 
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
index 3b3e17d..b3ff603 100644
--- a/drivers/staging/xgifb/XGI_main_26.c
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -2070,7 +2070,6 @@
 	release_mem_region(xgifb_info->video_base, xgifb_info->video_size);
 	pci_disable_device(pdev);
 	framebuffer_release(fb_info);
-	pci_set_drvdata(pdev, NULL);
 }
 
 static struct pci_driver xgifb_driver = {
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index 46dea3f..400c726 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -845,11 +845,10 @@
 			VCLKIndex = TVCLKBASE_315_25 + HiTVVCLK;
 
 		if (pVBInfo->SetFlag & TVSimuMode) {
-			if (modeflag & Charx8Dot) {
+			if (modeflag & Charx8Dot)
 				VCLKIndex = TVCLKBASE_315_25 + HiTVSimuVCLK;
-			} else {
+			else
 				VCLKIndex = TVCLKBASE_315_25 + HiTVTextVCLK;
-			}
 		}
 
 		/* 301lv */
@@ -5274,9 +5273,8 @@
 
 	outb(0x00, pVBInfo->P3c8);
 
-	for (i = 0; i < 256 * 3; i++) {
+	for (i = 0; i < 256 * 3; i++)
 		outb(0x0F, (pVBInfo->P3c8 + 1)); /* DAC_TEST_PARMS */
-	}
 
 	mdelay(1);
 
@@ -5291,9 +5289,8 @@
 	/* avoid display something, set BLACK DAC if not restore DAC */
 	outb(0x00, pVBInfo->P3c8);
 
-	for (i = 0; i < 256 * 3; i++) {
+	for (i = 0; i < 256 * 3; i++)
 		outb(0, (pVBInfo->P3c8 + 1));
-	}
 
 	xgifb_reg_set(pVBInfo->P3c4, 0x01, SR01);
 	xgifb_reg_set(pVBInfo->P3d4, 0x63, CR63);
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
index 7168eed..f17e5b9 100644
--- a/drivers/staging/xgifb/vb_table.h
+++ b/drivers/staging/xgifb/vb_table.h
@@ -1284,7 +1284,7 @@
 	{0, 1048,   0, 771}, /* 04 (640x480x60Hz) */
 	{0, 1048,   0, 771}, /* 05 (800x600x60Hz) */
 	{0, 1048, 805, 770}  /* 06 (1024x768x60Hz) */
-} ;
+};
 
 static const struct SiS_LVDSData XGI_LVDS1024x768Des_2[] = {
 	{1142,  856, 622, 587}, /* 00 (320x200,320x400,640x200,640x400) */
diff --git a/drivers/staging/xillybus/Kconfig b/drivers/staging/xillybus/Kconfig
index 8a4181f..b15f778 100644
--- a/drivers/staging/xillybus/Kconfig
+++ b/drivers/staging/xillybus/Kconfig
@@ -16,14 +16,14 @@
 
 config XILLYBUS_PCIE
 	tristate "Xillybus over PCIe"
-	depends on XILLYBUS && PCI
+	depends on PCI
 	help
 	  Set to M if you want Xillybus to use PCI Express for communicating
 	  with the FPGA.
 
 config XILLYBUS_OF
 	tristate "Xillybus over Device Tree"
-	depends on XILLYBUS && OF_ADDRESS && OF_IRQ
+	depends on OF_ADDRESS && OF_IRQ
 	help
 	  Set to M if you want Xillybus to find its resources from the
 	  Open Firmware Flattened Device Tree. If the target is an embedded
diff --git a/drivers/staging/xillybus/xillybus_core.c b/drivers/staging/xillybus/xillybus_core.c
index 7db6f03..2ebaf16 100644
--- a/drivers/staging/xillybus/xillybus_core.c
+++ b/drivers/staging/xillybus/xillybus_core.c
@@ -101,7 +101,7 @@
  * wr_mutex -> rd_mutex -> register_mutex -> wr_spinlock -> rd_spinlock
  */
 
-static void malformed_message(u32 *buf)
+static void malformed_message(struct xilly_endpoint *endpoint, u32 *buf)
 {
 	int opcode;
 	int msg_channel, msg_bufno, msg_data, msg_dir;
@@ -112,9 +112,9 @@
 	msg_bufno = (buf[0] >> 12) & 0x3ff;
 	msg_data = buf[1] & 0xfffffff;
 
-	pr_warn("xillybus: Malformed message (skipping): "
-		"opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n",
-		opcode, msg_channel, msg_dir, msg_bufno, msg_data);
+	dev_warn(endpoint->dev,
+		 "Malformed message (skipping): opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n",
+		 opcode, msg_channel, msg_dir, msg_bufno, msg_data);
 }
 
 /*
@@ -152,16 +152,16 @@
 
 	for (i = 0; i < buf_size; i += 2)
 		if (((buf[i+1] >> 28) & 0xf) != ep->msg_counter) {
-			malformed_message(&buf[i]);
-			pr_warn("xillybus: Sending a NACK on "
-				"counter %x (instead of %x) on entry %d\n",
+			malformed_message(ep, &buf[i]);
+			dev_warn(ep->dev,
+				 "Sending a NACK on counter %x (instead of %x) on entry %d\n",
 				((buf[i+1] >> 28) & 0xf),
 				ep->msg_counter,
 				i/2);
 
 			if (++ep->failed_messages > 10)
-				pr_err("xillybus: Lost sync with "
-				       "interrupt messages. Stopping.\n");
+				dev_err(ep->dev,
+					"Lost sync with interrupt messages. Stopping.\n");
 			else {
 				ep->ephw->hw_sync_sgl_for_device(
 					ep,
@@ -177,7 +177,7 @@
 			break;
 
 	if (i >= buf_size) {
-		pr_err("xillybus: Bad interrupt message. Stopping.\n");
+		dev_err(ep->dev, "Bad interrupt message. Stopping.\n");
 		return IRQ_HANDLED;
 	}
 
@@ -196,7 +196,7 @@
 
 			if ((msg_channel > ep->num_channels) ||
 			    (msg_channel == 0)) {
-				malformed_message(&buf[i]);
+				malformed_message(ep, &buf[i]);
 				break;
 			}
 
@@ -204,7 +204,7 @@
 
 			if (msg_dir) { /* Write channel */
 				if (msg_bufno >= channel->num_wr_buffers) {
-					malformed_message(&buf[i]);
+					malformed_message(ep, &buf[i]);
 					break;
 				}
 				spin_lock(&channel->wr_spinlock);
@@ -221,7 +221,7 @@
 				/* Read channel */
 
 				if (msg_bufno >= channel->num_rd_buffers) {
-					malformed_message(&buf[i]);
+					malformed_message(ep, &buf[i]);
 					break;
 				}
 
@@ -243,14 +243,14 @@
 			if ((msg_channel > ep->num_channels) ||
 			    (msg_channel == 0) || (!msg_dir) ||
 			    !ep->channels[msg_channel]->wr_supports_nonempty) {
-				malformed_message(&buf[i]);
+				malformed_message(ep, &buf[i]);
 				break;
 			}
 
 			channel = ep->channels[msg_channel];
 
 			if (msg_bufno >= channel->num_wr_buffers) {
-				malformed_message(&buf[i]);
+				malformed_message(ep, &buf[i]);
 				break;
 			}
 			spin_lock(&channel->wr_spinlock);
@@ -283,16 +283,11 @@
 		case XILLYMSG_OPCODE_FATAL_ERROR:
 			ep->fatal_error = 1;
 			wake_up_interruptible(&ep->ep_wait); /* For select() */
-			pr_err("xillybus: FPGA reported a fatal "
-			       "error. This means that the low-level "
-			       "communication with the device has failed. "
-			       "This hardware problem is most likely "
-			       "unrelated to xillybus (neither kernel "
-			       "module nor FPGA core), but reports are "
-			       "still welcome. All I/O is aborted.\n");
+			dev_err(ep->dev,
+				"FPGA reported a fatal error. This means that the low-level communication with the device has failed. This hardware problem is most likely unrelated to Xillybus (neither kernel module nor FPGA core), but reports are still welcome. All I/O is aborted.\n");
 			break;
 		default:
-			malformed_message(&buf[i]);
+			malformed_message(ep, &buf[i]);
 			break;
 		}
 	}
@@ -486,8 +481,8 @@
 
 		if ((channelnum > ep->num_channels) ||
 		    ((channelnum == 0) && !is_writebuf)) {
-			pr_err("xillybus: IDT requests channel out "
-			       "of range. Aborting.\n");
+			dev_err(ep->dev,
+				"IDT requests channel out of range. Aborting.\n");
 			return -ENODEV;
 		}
 
@@ -565,9 +560,8 @@
 				 */
 				if ((left_of_wr_salami < bytebufsize) &&
 				    (left_of_wr_salami > 0)) {
-					pr_err("xillybus: "
-					       "Corrupt buffer allocation "
-					       "in IDT. Aborting.\n");
+					dev_err(ep->dev,
+						"Corrupt buffer allocation in IDT. Aborting.\n");
 					return -ENODEV;
 				}
 
@@ -644,9 +638,8 @@
 				 */
 				if ((left_of_rd_salami < bytebufsize) &&
 				    (left_of_rd_salami > 0)) {
-					pr_err("xillybus: "
-					       "Corrupt buffer allocation "
-					       "in IDT. Aborting.\n");
+					dev_err(ep->dev,
+						"Corrupt buffer allocation in IDT. Aborting.\n");
 					return -ENODEV;
 				}
 
@@ -706,19 +699,19 @@
 	}
 
 	if (!msg_buf_done) {
-		pr_err("xillybus: Corrupt IDT: No message buffer. "
-		       "Aborting.\n");
+		dev_err(ep->dev,
+			"Corrupt IDT: No message buffer. Aborting.\n");
 		return -ENODEV;
 	}
 
 	return 0;
 
 memfail:
-	pr_err("xillybus: Failed to allocate write buffer memory. "
-	       "Aborting.\n");
+	dev_err(ep->dev,
+		"Failed to allocate write buffer memory. Aborting.\n");
 	return -ENOMEM;
 dmafail:
-	pr_err("xillybus: Failed to map DMA memory!. Aborting.\n");
+	dev_err(ep->dev, "Failed to map DMA memory!. Aborting.\n");
 	return -ENOMEM;
 }
 
@@ -745,8 +738,8 @@
 	scan++;
 
 	if (scan > end_of_idt) {
-		pr_err("xillybus: IDT device name list overflow. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"IDT device name list overflow. Aborting.\n");
 		idt_handle->chandesc = NULL;
 		return;
 	} else
@@ -757,8 +750,8 @@
 	if (len & 0x03) {
 		idt_handle->chandesc = NULL;
 
-		pr_err("xillybus: Corrupt IDT device name list. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"Corrupt IDT device name list. Aborting.\n");
 	}
 
 	idt_handle->entries = len >> 2;
@@ -787,7 +780,7 @@
 					 XILLY_TIMEOUT);
 
 	if (channel->wr_sleepy) {
-		pr_err("xillybus: Failed to obtain IDT. Aborting.\n");
+		dev_err(endpoint->dev, "Failed to obtain IDT. Aborting.\n");
 
 		if (endpoint->fatal_error)
 			return -EIO;
@@ -803,8 +796,8 @@
 		DMA_FROM_DEVICE);
 
 	if (channel->wr_buffers[0]->end_offset != endpoint->idtlen) {
-		pr_err("xillybus: IDT length mismatch (%d != %d). "
-		       "Aborting.\n",
+		dev_err(endpoint->dev,
+			"IDT length mismatch (%d != %d). Aborting.\n",
 		       channel->wr_buffers[0]->end_offset, endpoint->idtlen);
 		rc = -ENODEV;
 		return rc;
@@ -812,7 +805,7 @@
 
 	if (crc32_le(~0, channel->wr_buffers[0]->addr,
 		     endpoint->idtlen+1) != 0) {
-		pr_err("xillybus: IDT failed CRC check. Aborting.\n");
+		dev_err(endpoint->dev, "IDT failed CRC check. Aborting.\n");
 		rc = -ENODEV;
 		return rc;
 	}
@@ -821,9 +814,8 @@
 
 	/* Check version number. Accept anything below 0x82 for now. */
 	if (*version > 0x82) {
-		pr_err("xillybus: No support for IDT version 0x%02x. "
-		       "Maybe the xillybus driver needs an upgarde. "
-		       "Aborting.\n",
+		dev_err(endpoint->dev,
+			"No support for IDT version 0x%02x. Maybe the xillybus driver needs an upgarde. Aborting.\n",
 		       (int) *version);
 		rc = -ENODEV;
 		return rc;
@@ -1312,9 +1304,8 @@
 				 channel->rd_wait,
 				 (!channel->rd_full),
 				 timeout) == 0) {
-			pr_warn("xillybus: "
-				"Timed out while flushing. "
-				"Output data may be lost.\n");
+			dev_warn(channel->endpoint->dev,
+				"Timed out while flushing. Output data may be lost.\n");
 
 			rc = -ETIMEDOUT;
 			break;
@@ -1354,12 +1345,11 @@
 	rc = xillybus_myflush(channel, -1);
 
 	if (rc == -EINTR)
-		pr_warn("xillybus: Autoflush failed because "
-			"work queue thread got a signal.\n");
+		dev_warn(channel->endpoint->dev,
+			 "Autoflush failed because work queue thread got a signal.\n");
 	else if (rc)
-		pr_err("xillybus: Autoflush failed under "
-		       "weird circumstances.\n");
-
+		dev_err(channel->endpoint->dev,
+			"Autoflush failed under weird circumstances.\n");
 }
 
 static ssize_t xillybus_write(struct file *filp, const char __user *userbuf,
@@ -1615,8 +1605,8 @@
 	mutex_unlock(&ep_list_lock);
 
 	if (!endpoint) {
-		pr_err("xillybus: open() failed to find a device "
-		       "for major=%d and minor=%d\n", major, minor);
+		pr_err("xillybus: open() failed to find a device for major=%d and minor=%d\n",
+		       major, minor);
 		return -ENODEV;
 	}
 
@@ -1642,15 +1632,15 @@
 	if ((filp->f_mode & FMODE_READ) && (filp->f_flags & O_NONBLOCK) &&
 	    (channel->wr_synchronous || !channel->wr_allow_partial ||
 	     !channel->wr_supports_nonempty)) {
-		pr_err("xillybus: open() failed: "
-		       "O_NONBLOCK not allowed for read on this device\n");
+		dev_err(endpoint->dev,
+			"open() failed: O_NONBLOCK not allowed for read on this device\n");
 		return -ENODEV;
 	}
 
 	if ((filp->f_mode & FMODE_WRITE) && (filp->f_flags & O_NONBLOCK) &&
 	    (channel->rd_synchronous || !channel->rd_allow_partial)) {
-		pr_err("xillybus: open() failed: "
-		       "O_NONBLOCK not allowed for write on this device\n");
+		dev_err(endpoint->dev,
+			"open() failed: O_NONBLOCK not allowed for write on this device\n");
 		return -ENODEV;
 	}
 
@@ -1765,8 +1755,8 @@
 		rc = mutex_lock_interruptible(&channel->rd_mutex);
 
 		if (rc) {
-			pr_warn("xillybus: Failed to close file. "
-				"Hardware left in messy state.\n");
+			dev_warn(channel->endpoint->dev,
+				 "Failed to close file. Hardware left in messy state.\n");
 			return rc;
 		}
 
@@ -1791,8 +1781,8 @@
 	if (filp->f_mode & FMODE_READ) {
 		rc = mutex_lock_interruptible(&channel->wr_mutex);
 		if (rc) {
-			pr_warn("xillybus: Failed to close file. "
-				"Hardware left in messy state.\n");
+			dev_warn(channel->endpoint->dev,
+				 "Failed to close file. Hardware left in messy state.\n");
 			return rc;
 		}
 
@@ -1853,10 +1843,8 @@
 
 				if (channel->wr_sleepy) {
 					mutex_unlock(&channel->wr_mutex);
-					pr_warn("xillybus: Hardware failed to "
-						"respond to close command, "
-						"therefore left in "
-						"messy state.\n");
+					dev_warn(channel->endpoint->dev,
+						 "Hardware failed to respond to close command, therefore left in messy state.\n");
 					return -EINTR;
 				}
 			}
@@ -2022,7 +2010,7 @@
 				 xillyname);
 
 	if (rc) {
-		pr_warn("xillybus: Failed to obtain major/minors");
+		dev_warn(endpoint->dev, "Failed to obtain major/minors");
 		goto error1;
 	}
 
@@ -2034,7 +2022,7 @@
 	rc = cdev_add(&endpoint->cdev, MKDEV(major, minor),
 		      endpoint->num_channels);
 	if (rc) {
-		pr_warn("xillybus: Failed to add cdev. Aborting.\n");
+		dev_warn(endpoint->dev, "Failed to add cdev. Aborting.\n");
 		goto error2;
 	}
 
@@ -2057,14 +2045,15 @@
 				       "%s", devname);
 
 		if (IS_ERR(device)) {
-			pr_warn("xillybus: Failed to create %s "
-				"device. Aborting.\n", devname);
+			dev_warn(endpoint->dev,
+				 "Failed to create %s device. Aborting.\n",
+				 devname);
 			goto error3;
 		}
 	}
 
-	pr_info("xillybus: Created %d device files.\n",
-		endpoint->num_channels);
+	dev_info(endpoint->dev, "Created %d device files.\n",
+		 endpoint->num_channels);
 	return 0; /* succeed */
 
 error3:
@@ -2093,8 +2082,8 @@
 				       endpoint->lowest_minor),
 				 endpoint->num_channels);
 
-	pr_info("xillybus: Removed %d device files.\n",
-		endpoint->num_channels);
+	dev_info(endpoint->dev, "Removed %d device files.\n",
+		 endpoint->num_channels);
 }
 
 
@@ -2107,7 +2096,7 @@
 
 	endpoint = kzalloc(sizeof(*endpoint), GFP_KERNEL);
 	if (!endpoint) {
-		pr_err("xillybus: Failed to allocate memory. Aborting.\n");
+		dev_err(dev, "Failed to allocate memory. Aborting.\n");
 		return NULL;
 	}
 
@@ -2141,8 +2130,8 @@
 					 XILLY_TIMEOUT);
 
 	if (endpoint->idtlen < 0) {
-		pr_err("xillybus: Failed to quiesce the device on "
-		       "exit. Quitting while leaving a mess.\n");
+		dev_err(endpoint->dev,
+			"Failed to quiesce the device on exit. Quitting while leaving a mess.\n");
 		return -ENODEV;
 	}
 	return 0; /* Success */
@@ -2209,7 +2198,7 @@
 					 XILLY_TIMEOUT);
 
 	if (endpoint->idtlen < 0) {
-		pr_err("xillybus: No response from FPGA. Aborting.\n");
+		dev_err(endpoint->dev, "No response from FPGA. Aborting.\n");
 		rc = -ENODEV;
 		goto failed_quiesce;
 	}
@@ -2323,7 +2312,7 @@
 	xillybus_class = class_create(THIS_MODULE, xillyname);
 	if (IS_ERR(xillybus_class)) {
 		rc = PTR_ERR(xillybus_class);
-		pr_warn("xillybus: Failed to register class xillybus\n");
+		pr_warn("Failed to register class xillybus\n");
 
 		return rc;
 	}
diff --git a/drivers/staging/xillybus/xillybus_of.c b/drivers/staging/xillybus/xillybus_of.c
index 92c2931..394bfea 100644
--- a/drivers/staging/xillybus/xillybus_of.c
+++ b/drivers/staging/xillybus/xillybus_of.c
@@ -117,14 +117,15 @@
 
 	rc = of_address_to_resource(dev->of_node, 0, &endpoint->res);
 	if (rc) {
-		pr_warn("xillybus: Failed to obtain device tree "
-			"resource\n");
+		dev_warn(endpoint->dev,
+			 "Failed to obtain device tree resource\n");
 		goto failed_request_regions;
 	}
 
 	if  (!request_mem_region(endpoint->res.start,
 				 resource_size(&endpoint->res), xillyname)) {
-		pr_err("xillybus: request_mem_region failed. Aborting.\n");
+		dev_err(endpoint->dev,
+			"request_mem_region failed. Aborting.\n");
 		rc = -EBUSY;
 		goto failed_request_regions;
 	}
@@ -132,7 +133,8 @@
 	endpoint->registers = of_iomap(dev->of_node, 0);
 
 	if (!endpoint->registers) {
-		pr_err("xillybus: Failed to map I/O memory. Aborting.\n");
+		dev_err(endpoint->dev,
+			"Failed to map I/O memory. Aborting.\n");
 		goto failed_iomap0;
 	}
 
@@ -141,8 +143,8 @@
 	rc = request_irq(irq, xillybus_isr, 0, xillyname, endpoint);
 
 	if (rc) {
-		pr_err("xillybus: Failed to register IRQ handler. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"Failed to register IRQ handler. Aborting.\n");
 		rc = -ENODEV;
 		goto failed_register_irq;
 	}
@@ -198,15 +200,4 @@
 	},
 };
 
-static int __init xillybus_of_init(void)
-{
-	return platform_driver_register(&xillybus_platform_driver);
-}
-
-static void __exit xillybus_of_exit(void)
-{
-	platform_driver_unregister(&xillybus_platform_driver);
-}
-
-module_init(xillybus_of_init);
-module_exit(xillybus_of_exit);
+module_platform_driver(xillybus_platform_driver);
diff --git a/drivers/staging/xillybus/xillybus_pcie.c b/drivers/staging/xillybus/xillybus_pcie.c
index 6701365..1811aa7 100644
--- a/drivers/staging/xillybus/xillybus_pcie.c
+++ b/drivers/staging/xillybus/xillybus_pcie.c
@@ -134,7 +134,7 @@
 	struct xilly_endpoint *endpoint;
 	int rc = 0;
 
-	endpoint = xillybus_init_endpoint(pdev, NULL, &pci_hw);
+	endpoint = xillybus_init_endpoint(pdev, &pdev->dev, &pci_hw);
 
 	if (!endpoint)
 		return -ENOMEM;
@@ -148,29 +148,29 @@
 	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
 
 	if (rc) {
-		pr_err("xillybus: pci_enable_device() failed. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"pci_enable_device() failed. Aborting.\n");
 		goto no_enable;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		pr_err("xillybus: Incorrect BAR configuration. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"Incorrect BAR configuration. Aborting.\n");
 		rc = -ENODEV;
 		goto bad_bar;
 	}
 
 	rc = pci_request_regions(pdev, xillyname);
 	if (rc) {
-		pr_err("xillybus: pci_request_regions() failed. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"pci_request_regions() failed. Aborting.\n");
 		goto failed_request_regions;
 	}
 
 	endpoint->registers = pci_iomap(pdev, 0, 128);
 
 	if (!endpoint->registers) {
-		pr_err("xillybus: Failed to map BAR 0. Aborting.\n");
+		dev_err(endpoint->dev, "Failed to map BAR 0. Aborting.\n");
 		goto failed_iomap0;
 	}
 
@@ -178,16 +178,16 @@
 
 	/* Set up a single MSI interrupt */
 	if (pci_enable_msi(pdev)) {
-		pr_err("xillybus: Failed to enable MSI interrupts. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"Failed to enable MSI interrupts. Aborting.\n");
 		rc = -ENODEV;
 		goto failed_enable_msi;
 	}
 	rc = request_irq(pdev->irq, xillybus_isr, 0, xillyname, endpoint);
 
 	if (rc) {
-		pr_err("xillybus: Failed to register MSI handler. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev,
+			"Failed to register MSI handler. Aborting.\n");
 		rc = -ENODEV;
 		goto failed_register_msi;
 	}
@@ -202,8 +202,7 @@
 	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
 		endpoint->dma_using_dac = 0;
 	else {
-		pr_err("xillybus: Failed to set DMA mask. "
-		       "Aborting.\n");
+		dev_err(endpoint->dev, "Failed to set DMA mask. Aborting.\n");
 		rc = -ENODEV;
 		goto failed_dmamask;
 	}
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 2c4ed52..79ce363 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -648,6 +648,9 @@
 	zram = dev_to_zram(dev);
 	bdev = bdget_disk(zram->disk, 0);
 
+	if (!bdev)
+		return -ENOMEM;
+
 	/* Do not reset an active device! */
 	if (bdev->bd_holders)
 		return -EBUSY;
@@ -660,8 +663,7 @@
 		return -EINVAL;
 
 	/* Make sure all pending I/O is finished */
-	if (bdev)
-		fsync_bdev(bdev);
+	fsync_bdev(bdev);
 
 	zram_reset_device(zram, true);
 	return len;
@@ -896,13 +898,10 @@
 	sysfs_remove_group(&disk_to_dev(zram->disk)->kobj,
 			&zram_disk_attr_group);
 
-	if (zram->disk) {
-		del_gendisk(zram->disk);
-		put_disk(zram->disk);
-	}
+	del_gendisk(zram->disk);
+	put_disk(zram->disk);
 
-	if (zram->queue)
-		blk_cleanup_queue(zram->queue);
+	blk_cleanup_queue(zram->queue);
 }
 
 static int __init zram_init(void)
diff --git a/drivers/staging/zsmalloc/Kconfig b/drivers/staging/zsmalloc/Kconfig
index 7fab032..0ae13cd0 100644
--- a/drivers/staging/zsmalloc/Kconfig
+++ b/drivers/staging/zsmalloc/Kconfig
@@ -1,5 +1,6 @@
 config ZSMALLOC
 	bool "Memory allocator for compressed pages"
+	depends on MMU
 	default n
 	help
 	  zsmalloc is a slab-based memory allocator designed to store
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index a93a424..8096fcb 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -349,7 +349,7 @@
 	bfin_jc_straight_buffer_write(buf, count);
 }
 
-static struct __initdata console bfin_jc_early_console = {
+static struct console bfin_jc_early_console __initdata = {
 	.name   = "early_BFJC",
 	.write   = bfin_jc_early_write,
 	.flags   = CON_ANYTIME | CON_PRINTBUFFER,
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 44fbeba..3502a7b 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -86,6 +86,21 @@
 	return i;
 }
 
+static bool hvc_dcc_check(void)
+{
+	unsigned long time = jiffies + (HZ / 10);
+
+	/* Write a test character to check if it is handled */
+	__dcc_putchar('\n');
+
+	while (time_is_after_jiffies(time)) {
+		if (!(__dcc_getstatus() & DCC_STATUS_TX))
+			return true;
+	}
+
+	return false;
+}
+
 static const struct hv_ops hvc_dcc_get_put_ops = {
 	.get_chars = hvc_dcc_get_chars,
 	.put_chars = hvc_dcc_put_chars,
@@ -93,6 +108,9 @@
 
 static int __init hvc_dcc_console_init(void)
 {
+	if (!hvc_dcc_check())
+		return -ENODEV;
+
 	hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
 	return 0;
 }
@@ -100,6 +118,9 @@
 
 static int __init hvc_dcc_init(void)
 {
+	if (!hvc_dcc_check())
+		return -ENODEV;
+
 	hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
 	return 0;
 }
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index fd17a9b..db19a38 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -1354,8 +1354,7 @@
 	mempool_destroy(hvc_iucv_mempool);
 	kmem_cache_destroy(hvc_iucv_buffer_cache);
 out_error:
-	if (hvc_iucv_filter)
-		kfree(hvc_iucv_filter);
+	kfree(hvc_iucv_filter);
 	hvc_iucv_devices = 0; /* ensure that we do not provide any device */
 	return rc;
 }
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index c791b18..b594abf 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -48,6 +48,7 @@
 #include <asm/prom.h>
 #include <asm/hvsi.h>
 #include <asm/udbg.h>
+#include <asm/machdep.h>
 
 #include "hvc_console.h"
 
@@ -457,7 +458,9 @@
 	if (hvterm_priv0.proto == HV_PROTOCOL_HVSI)
 		goto out;
 #endif
-	add_preferred_console("hvc", 0, NULL);
+	/* Check whether the user has requested a different console. */
+	if (!strstr(cmd_line, "console="))
+		add_preferred_console("hvc", 0, NULL);
 	hvc_instantiate(0, 0, ops);
 out:
 	of_node_put(stdout_node);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 7a744b6..7cdd1eb 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -767,7 +767,7 @@
 	 * of echo overrun before the next commit), then discard enough
 	 * data at the tail to prevent a subsequent overrun */
 	while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
-		if (echo_buf(ldata, tail == ECHO_OP_START)) {
+		if (echo_buf(ldata, tail) == ECHO_OP_START) {
 			if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB)
 				tail += 3;
 			else
@@ -1752,20 +1752,14 @@
 static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
 	struct n_tty_data *ldata = tty->disc_data;
-	int canon_change = 1;
 
-	if (old)
-		canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
-	if (canon_change) {
+	if (!old || (old->c_lflag ^ tty->termios.c_lflag) & ICANON) {
 		bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
 		ldata->line_start = ldata->canon_head = ldata->read_tail;
 		ldata->erasing = 0;
 		ldata->lnext = 0;
 	}
 
-	if (canon_change && !L_ICANON(tty) && read_cnt(ldata))
-		wake_up_interruptible(&tty->read_wait);
-
 	ldata->icanon = (L_ICANON(tty) != 0);
 
 	if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) ||
@@ -1820,9 +1814,8 @@
 	 * Fix tty hang when I_IXON(tty) is cleared, but the tty
 	 * been stopped by STOP_CHAR(tty) before it.
 	 */
-	if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
+	if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped)
 		start_tty(tty);
-	}
 
 	/* The termios change make the tty ready for I/O */
 	wake_up_interruptible(&tty->write_wait);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index d6080c3..cd04293 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -959,7 +959,7 @@
 		dev_err(&dc->pdev->dev,
 			"ERROR: flow control received for non-existing port\n");
 		return 0;
-	};
+	}
 
 	DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl),
 	   *((u16 *)&ctrl_dl));
@@ -1025,7 +1025,7 @@
 		dev_err(&dc->pdev->dev,
 			"ERROR: send flow control " \
 			"received for non-existing port\n");
-	};
+	}
 	return CTRL_ERROR;
 }
 
@@ -1805,7 +1805,7 @@
 	default:
 		DBG1("ERR: 0x%08X, %d", cmd, cmd);
 		break;
-	};
+	}
 
 	return rval;
 }
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 570df9d..e33d38c 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2322,7 +2322,7 @@
 
 	if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
 		fcr = uart_config[port->type].fcr;
-		if (baud < 2400 || fifo_bug) {
+		if ((baud < 2400 && !up->dma) || fifo_bug) {
 			fcr &= ~UART_FCR_TRIGGER_MASK;
 			fcr |= UART_FCR_TRIGGER_1;
 		}
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index daf710f..4658e3e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -56,11 +56,11 @@
 
 
 struct dw8250_data {
-	int		last_lcr;
-	int		last_mcr;
-	int		line;
-	struct clk	*clk;
-	u8		usr_reg;
+	u8			usr_reg;
+	int			last_mcr;
+	int			line;
+	struct clk		*clk;
+	struct uart_8250_dma	dma;
 };
 
 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
@@ -76,17 +76,33 @@
 	return value;
 }
 
+static void dw8250_force_idle(struct uart_port *p)
+{
+	serial8250_clear_and_reinit_fifos(container_of
+					  (p, struct uart_8250_port, port));
+	(void)p->serial_in(p, UART_RX);
+}
+
 static void dw8250_serial_out(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
 
-	if (offset == UART_LCR)
-		d->last_lcr = value;
-
 	if (offset == UART_MCR)
 		d->last_mcr = value;
 
 	writeb(value, p->membase + (offset << p->regshift));
+
+	/* Make sure LCR write wasn't ignored */
+	if (offset == UART_LCR) {
+		int tries = 1000;
+		while (tries--) {
+			if (value == p->serial_in(p, UART_LCR))
+				return;
+			dw8250_force_idle(p);
+			writeb(value, p->membase + (UART_LCR << p->regshift));
+		}
+		dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+	}
 }
 
 static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
@@ -107,13 +123,22 @@
 {
 	struct dw8250_data *d = p->private_data;
 
-	if (offset == UART_LCR)
-		d->last_lcr = value;
-
 	if (offset == UART_MCR)
 		d->last_mcr = value;
 
 	writel(value, p->membase + (offset << p->regshift));
+
+	/* Make sure LCR write wasn't ignored */
+	if (offset == UART_LCR) {
+		int tries = 1000;
+		while (tries--) {
+			if (value == p->serial_in(p, UART_LCR))
+				return;
+			dw8250_force_idle(p);
+			writel(value, p->membase + (UART_LCR << p->regshift));
+		}
+		dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+	}
 }
 
 static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
@@ -131,9 +156,8 @@
 	if (serial8250_handle_irq(p, iir)) {
 		return 1;
 	} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
-		/* Clear the USR and write the LCR again. */
+		/* Clear the USR */
 		(void)p->serial_in(p, d->usr_reg);
-		p->serial_out(p, UART_LCR, d->last_lcr);
 
 		return 1;
 	}
@@ -153,6 +177,14 @@
 		pm_runtime_put_sync_suspend(port->dev);
 }
 
+static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct dw8250_data *data = param;
+
+	return chan->chan_id == data->dma.tx_chan_id ||
+	       chan->chan_id == data->dma.rx_chan_id;
+}
+
 static void dw8250_setup_port(struct uart_8250_port *up)
 {
 	struct uart_port	*p = &up->port;
@@ -241,7 +273,8 @@
 }
 
 #ifdef CONFIG_ACPI
-static int dw8250_probe_acpi(struct uart_8250_port *up)
+static int dw8250_probe_acpi(struct uart_8250_port *up,
+			     struct dw8250_data *data)
 {
 	const struct acpi_device_id *id;
 	struct uart_port *p = &up->port;
@@ -260,9 +293,7 @@
 	if (!p->uartclk)
 		p->uartclk = (unsigned int)id->driver_data;
 
-	up->dma = devm_kzalloc(p->dev, sizeof(*up->dma), GFP_KERNEL);
-	if (!up->dma)
-		return -ENOMEM;
+	up->dma = &data->dma;
 
 	up->dma->rxconf.src_maxburst = p->fifosize / 4;
 	up->dma->txconf.dst_maxburst = p->fifosize / 4;
@@ -270,7 +301,8 @@
 	return 0;
 }
 #else
-static inline int dw8250_probe_acpi(struct uart_8250_port *up)
+static inline int dw8250_probe_acpi(struct uart_8250_port *up,
+				    struct dw8250_data *data)
 {
 	return -ENODEV;
 }
@@ -314,6 +346,12 @@
 		uart.port.uartclk = clk_get_rate(data->clk);
 	}
 
+	data->dma.rx_chan_id = -1;
+	data->dma.tx_chan_id = -1;
+	data->dma.rx_param = data;
+	data->dma.tx_param = data;
+	data->dma.fn = dw8250_dma_filter;
+
 	uart.port.iotype = UPIO_MEM;
 	uart.port.serial_in = dw8250_serial_in;
 	uart.port.serial_out = dw8250_serial_out;
@@ -324,7 +362,7 @@
 		if (err)
 			return err;
 	} else if (ACPI_HANDLE(&pdev->dev)) {
-		err = dw8250_probe_acpi(&uart);
+		err = dw8250_probe_acpi(&uart, data);
 		if (err)
 			return err;
 	} else {
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 5f3bba1..d1a9078 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -122,7 +122,7 @@
 	up.port.dev = &pdev->dev;
 	up.port.private_data = priv;
 
-	clk_enable(priv->sclk);
+	clk_prepare_enable(priv->sclk);
 	up.port.uartclk = clk_get_rate(priv->sclk);
 
 	up.port.iotype = UPIO_MEM32;
@@ -134,7 +134,7 @@
 	ret = serial8250_register_8250_port(&up);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "unable to register 8250 port\n");
-		clk_disable(priv->sclk);
+		clk_disable_unprepare(priv->sclk);
 		return ret;
 	}
 
@@ -148,7 +148,7 @@
 	struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(priv->line);
-	clk_disable(priv->sclk);
+	clk_disable_unprepare(priv->sclk);
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c810da7..4697a51 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -9,6 +9,7 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License.
  */
+#undef DEBUG
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pci.h>
@@ -27,8 +28,6 @@
 
 #include "8250.h"
 
-#undef SERIAL_DEBUG_PCI
-
 /*
  * init function returns:
  *  > 0 - number of ports
@@ -63,7 +62,7 @@
 
 static void moan_device(const char *str, struct pci_dev *dev)
 {
-	printk(KERN_WARNING
+	dev_err(&dev->dev,
 	       "%s: %s\n"
 	       "Please send the output of lspci -vv, this\n"
 	       "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
@@ -233,7 +232,7 @@
 	/* is firmware started? */
 	pci_read_config_dword(dev, 0x44, (void *)&oldval);
 	if (oldval == 0x00001000L) { /* RESET value */
-		printk(KERN_DEBUG "Local i960 firmware missing");
+		dev_dbg(&dev->dev, "Local i960 firmware missing\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -827,7 +826,7 @@
 		if (sub_serports > 0) {
 			return sub_serports;
 		} else {
-			printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+			dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
 			return 0;
 		}
 	}
@@ -931,7 +930,7 @@
 	}
 
 	if (!inta_addr[i]) {
-		printk(KERN_ERR "ite887x: could not find iobase\n");
+		dev_err(&dev->dev, "ite887x: could not find iobase\n");
 		return -ENODEV;
 	}
 
@@ -1024,9 +1023,9 @@
 	/* Tornado device */
 	if (deviceID == 0x07000200) {
 		number_uarts = ioread8(p + 4);
-		printk(KERN_DEBUG
+		dev_dbg(&dev->dev,
 			"%d ports detected on Oxford PCI Express device\n",
-								number_uarts);
+			number_uarts);
 	}
 	pci_iounmap(dev, p);
 	return number_uarts;
@@ -1308,6 +1307,29 @@
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int pci_pericom_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	unsigned int bar, offset = board->first_offset, maxnr;
+
+	bar = FL_GET_BASE(board->flags);
+	if (board->flags & FL_BASE_BARS)
+		bar += idx;
+	else
+		offset += idx * board->uart_offset;
+
+	maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+		(board->reg_shift + 3);
+
+	if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+		return 1;
+
+	port->port.uartclk = 14745600;
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
 static int
 ce4100_serial_setup(struct serial_private *priv,
 		  const struct pciserial_board *board,
@@ -1324,6 +1346,120 @@
 	return ret;
 }
 
+#define PCI_DEVICE_ID_INTEL_BYT_UART1	0x0f0a
+#define PCI_DEVICE_ID_INTEL_BYT_UART2	0x0f0c
+
+#define BYT_PRV_CLK			0x800
+#define BYT_PRV_CLK_EN			(1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT		1
+#define BYT_PRV_CLK_N_VAL_SHIFT		16
+#define BYT_PRV_CLK_UPDATE		(1 << 31)
+
+#define BYT_GENERAL_REG			0x808
+#define BYT_GENERAL_DIS_RTS_N_OVERRIDE	(1 << 3)
+
+#define BYT_TX_OVF_INT			0x820
+#define BYT_TX_OVF_INT_MASK		(1 << 1)
+
+static void
+byt_set_termios(struct uart_port *p, struct ktermios *termios,
+		struct ktermios *old)
+{
+	unsigned int baud = tty_termios_baud_rate(termios);
+	unsigned int m = 6912;
+	unsigned int n = 15625;
+	u32 reg;
+
+	/* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */
+	if (baud == 1000000 || baud == 2000000 || baud == 4000000) {
+		m = 64;
+		n = 100;
+
+		p->uartclk = 64000000;
+	} else if (baud == 3000000) {
+		m = 48;
+		n = 100;
+
+		p->uartclk = 48000000;
+	} else {
+		p->uartclk = 44236800;
+	}
+
+	/* Reset the clock */
+	reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+	writel(reg, p->membase + BYT_PRV_CLK);
+	reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+	writel(reg, p->membase + BYT_PRV_CLK);
+
+	/*
+	 * If auto-handshake mechanism is not enabled,
+	 * disable rts_n override
+	 */
+	reg = readl(p->membase + BYT_GENERAL_REG);
+	reg &= ~BYT_GENERAL_DIS_RTS_N_OVERRIDE;
+	if (termios->c_cflag & CRTSCTS)
+		reg |= BYT_GENERAL_DIS_RTS_N_OVERRIDE;
+	writel(reg, p->membase + BYT_GENERAL_REG);
+
+	serial8250_do_set_termios(p, termios, old);
+}
+
+static bool byt_dma_filter(struct dma_chan *chan, void *param)
+{
+	return chan->chan_id == *(int *)param;
+}
+
+static int
+byt_serial_setup(struct serial_private *priv,
+		 const struct pciserial_board *board,
+		 struct uart_8250_port *port, int idx)
+{
+	struct uart_8250_dma *dma;
+	int ret;
+
+	dma = devm_kzalloc(port->port.dev, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return -ENOMEM;
+
+	switch (priv->dev->device) {
+	case PCI_DEVICE_ID_INTEL_BYT_UART1:
+		dma->rx_chan_id = 3;
+		dma->tx_chan_id = 2;
+		break;
+	case PCI_DEVICE_ID_INTEL_BYT_UART2:
+		dma->rx_chan_id = 5;
+		dma->tx_chan_id = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dma->rxconf.slave_id = dma->rx_chan_id;
+	dma->rxconf.src_maxburst = 16;
+
+	dma->txconf.slave_id = dma->tx_chan_id;
+	dma->txconf.dst_maxburst = 16;
+
+	dma->fn = byt_dma_filter;
+	dma->rx_param = &dma->rx_chan_id;
+	dma->tx_param = &dma->tx_chan_id;
+
+	ret = pci_default_setup(priv, board, port, idx);
+	port->port.iotype = UPIO_MEM;
+	port->port.type = PORT_16550A;
+	port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+	port->port.set_termios = byt_set_termios;
+	port->port.fifosize = 64;
+	port->tx_loadsz = 64;
+	port->dma = dma;
+	port->capabilities = UART_CAP_FIFO | UART_CAP_AFE;
+
+	/* Disable Tx counter interrupts */
+	writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT);
+
+	return ret;
+}
+
 static int
 pci_omegapci_setup(struct serial_private *priv,
 		      const struct pciserial_board *board,
@@ -1344,17 +1480,80 @@
 	return ret;
 }
 
+static int pci_fintek_setup(struct serial_private *priv,
+			    const struct pciserial_board *board,
+			    struct uart_8250_port *port, int idx)
+{
+	struct pci_dev *pdev = priv->dev;
+	unsigned long base;
+	unsigned long iobase;
+	unsigned long ciobase = 0;
+	u8 config_base;
+
+	/*
+	 * We are supposed to be able to read these from the PCI config space,
+	 * but the values there don't seem to match what we need to use, so
+	 * just use these hard-coded values for now, as they are correct.
+	 */
+	switch (idx) {
+	case 0: iobase = 0xe000; config_base = 0x40; break;
+	case 1: iobase = 0xe008; config_base = 0x48; break;
+	case 2: iobase = 0xe010; config_base = 0x50; break;
+	case 3: iobase = 0xe018; config_base = 0x58; break;
+	case 4: iobase = 0xe020; config_base = 0x60; break;
+	case 5: iobase = 0xe028; config_base = 0x68; break;
+	case 6: iobase = 0xe030; config_base = 0x70; break;
+	case 7: iobase = 0xe038; config_base = 0x78; break;
+	case 8: iobase = 0xe040; config_base = 0x80; break;
+	case 9: iobase = 0xe048; config_base = 0x88; break;
+	case 10: iobase = 0xe050; config_base = 0x90; break;
+	case 11: iobase = 0xe058; config_base = 0x98; break;
+	default:
+		/* Unknown number of ports, get out of here */
+		return -EINVAL;
+	}
+
+	if (idx < 4) {
+		base = pci_resource_start(priv->dev, 3);
+		ciobase = (int)(base + (0x8 * idx));
+	}
+
+	dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx ciobase=0x%lx config_base=0x%2x\n",
+		__func__, idx, iobase, ciobase, config_base);
+
+	/* Enable UART I/O port */
+	pci_write_config_byte(pdev, config_base + 0x00, 0x01);
+
+	/* Select 128-byte FIFO and 8x FIFO threshold */
+	pci_write_config_byte(pdev, config_base + 0x01, 0x33);
+
+	/* LSB UART */
+	pci_write_config_byte(pdev, config_base + 0x04, (u8)(iobase & 0xff));
+
+	/* MSB UART */
+	pci_write_config_byte(pdev, config_base + 0x05, (u8)((iobase & 0xff00) >> 8));
+
+	/* irq number, this usually fails, but the spec says to do it anyway. */
+	pci_write_config_byte(pdev, config_base + 0x06, pdev->irq);
+
+	port->port.iotype = UPIO_PORT;
+	port->port.iobase = iobase;
+	port->port.mapbase = 0;
+	port->port.membase = NULL;
+	port->port.regshift = 0;
+
+	return 0;
+}
+
 static int skip_tx_en_setup(struct serial_private *priv,
 			const struct pciserial_board *board,
 			struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_NO_TXEN_TEST;
-	printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
-			  "[%04x:%04x] subsystem [%04x:%04x]\n",
-			  priv->dev->vendor,
-			  priv->dev->device,
-			  priv->dev->subsystem_vendor,
-			  priv->dev->subsystem_device);
+	dev_dbg(&priv->dev->dev,
+		"serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
+		priv->dev->vendor, priv->dev->device,
+		priv->dev->subsystem_vendor, priv->dev->subsystem_device);
 
 	return pci_default_setup(priv, board, port, idx);
 }
@@ -1662,6 +1861,20 @@
 		.subdevice	= PCI_ANY_ID,
 		.setup		= kt_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BYT_UART1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BYT_UART2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -1826,6 +2039,31 @@
 		.exit		= pci_plx9050_exit,
 	},
 	/*
+	 * Pericom
+	 */
+	{
+		.vendor		= 0x12d8,
+		.device		= 0x7952,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_pericom_setup,
+	},
+	{
+		.vendor		= 0x12d8,
+		.device		= 0x7954,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_pericom_setup,
+	},
+	{
+		.vendor		= 0x12d8,
+		.device		= 0x7958,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_pericom_setup,
+	},
+
+	/*
 	 * PLX
 	 */
 	{
@@ -2255,6 +2493,27 @@
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_brcm_trumanage_setup,
 	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1104,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_setup,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1108,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_setup,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1112,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_setup,
+	},
 
 	/*
 	 * Default "match everything" terminator entry
@@ -2449,9 +2708,13 @@
 	pbn_ADDIDATA_PCIe_4_3906250,
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
+	pbn_byt,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
 	pbn_brcm_trumanage,
+	pbn_fintek_4,
+	pbn_fintek_8,
+	pbn_fintek_12,
 };
 
 /*
@@ -3185,6 +3448,13 @@
 		.base_baud	= 921600,
 		.reg_shift      = 2,
 	},
+	[pbn_byt] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 2764800,
+		.uart_offset	= 0x80,
+		.reg_shift      = 2,
+	},
 	[pbn_omegapci] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 8,
@@ -3202,6 +3472,24 @@
 		.reg_shift	= 2,
 		.base_baud	= 115200,
 	},
+	[pbn_fintek_4] = {
+		.num_ports	= 4,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+		.first_offset	= 0x40,
+	},
+	[pbn_fintek_8] = {
+		.num_ports	= 8,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+		.first_offset	= 0x40,
+	},
+	[pbn_fintek_12] = {
+		.num_ports	= 12,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+		.first_offset	= 0x40,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -3362,14 +3650,15 @@
 		if (quirk->setup(priv, board, &uart, i))
 			break;
 
-#ifdef SERIAL_DEBUG_PCI
-		printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
-		       uart.port.iobase, uart.port.irq, uart.port.iotype);
-#endif
+		dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+			uart.port.iobase, uart.port.irq, uart.port.iotype);
 
 		priv->line[i] = serial8250_register_8250_port(&uart);
 		if (priv->line[i] < 0) {
-			printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
+			dev_err(&dev->dev,
+				"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+				uart.port.iobase, uart.port.irq,
+				uart.port.iotype, priv->line[i]);
 			break;
 		}
 	}
@@ -3462,7 +3751,7 @@
 	}
 
 	if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
-		printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+		dev_err(&dev->dev, "invalid driver_data: %ld\n",
 			ent->driver_data);
 		return -EINVAL;
 	}
@@ -3520,8 +3809,6 @@
 {
 	struct serial_private *priv = pci_get_drvdata(dev);
 
-	pci_set_drvdata(dev, NULL);
-
 	pciserial_remove_ports(priv);
 
 	pci_disable_device(dev);
@@ -3555,7 +3842,7 @@
 		err = pci_enable_device(dev);
 		/* FIXME: We cannot simply error out here */
 		if (err)
-			printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
+			dev_err(&dev->dev, "Unable to re-enable ports, trying to continue.\n");
 		pciserial_resume_ports(priv);
 	}
 	return 0;
@@ -4848,6 +5135,15 @@
 	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
 		PCI_ANY_ID,  PCI_ANY_ID, 0, 0,
 		pbn_ce4100_1_115200 },
+	/* Intel BayTrail */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
 
 	/*
 	 * Cronyx Omega PCI
@@ -4918,6 +5214,11 @@
 		0,
 		0, pbn_exar_XR17V358 },
 
+	/* Fintek PCI serial cards */
+	{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
+	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
+	{ PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index febd45c..a3817ab 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -709,7 +709,7 @@
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || ARCH_SHMOBILE)
+	depends on HAVE_CLK && (SUPERH || ARM || COMPILE_TEST)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
@@ -1512,6 +1512,7 @@
 config SERIAL_ST_ASC
 	tristate "ST ASC serial port support"
 	select SERIAL_CORE
+	depends on ARM || COMPILE_TEST
 	help
 	  This driver is for the on-chip Asychronous Serial Controller on
 	  STMicroelectronics STi SoCs.
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 8b90f0b..33bd860 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -728,7 +728,6 @@
 	amba_set_drvdata(dev, uap);
 	ret = uart_add_one_port(&amba_reg, &uap->port);
 	if (ret) {
-		amba_set_drvdata(dev, NULL);
 		amba_ports[i] = NULL;
 		clk_put(uap->clk);
  unmap:
@@ -745,8 +744,6 @@
 	struct uart_amba_port *uap = amba_get_drvdata(dev);
 	int i;
 
-	amba_set_drvdata(dev, NULL);
-
 	uart_remove_one_port(&amba_reg, &uap->port);
 
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index aaa2286..7203864 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2147,7 +2147,6 @@
 	amba_set_drvdata(dev, uap);
 	ret = uart_add_one_port(&amba_reg, &uap->port);
 	if (ret) {
-		amba_set_drvdata(dev, NULL);
 		amba_ports[i] = NULL;
 		pl011_dma_remove(uap);
 	}
@@ -2160,8 +2159,6 @@
 	struct uart_amba_port *uap = amba_get_drvdata(dev);
 	int i;
 
-	amba_set_drvdata(dev, NULL);
-
 	uart_remove_one_port(&amba_reg, &uap->port);
 
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 569872f..c9f5c9d 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -533,7 +533,7 @@
 	unsigned long *plat_data;
 	struct arc_uart_port *uart = &arc_uart_ports[dev_id];
 
-	plat_data = (unsigned long *)dev_get_platdata(&pdev->dev);
+	plat_data = dev_get_platdata(&pdev->dev);
 	if (!plat_data)
 		return -ENODEV;
 
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 6b0f75e..c7d99af 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -99,6 +99,7 @@
 #define UART_PUT_RTOR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_RTOR)
 #define UART_PUT_TTGR(port, v)	__raw_writel(v, (port)->membase + ATMEL_US_TTGR)
 #define UART_GET_IP_NAME(port)	__raw_readl((port)->membase + ATMEL_US_NAME)
+#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
 
  /* PDC registers */
 #define UART_PUT_PTCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
@@ -1503,6 +1504,7 @@
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	int name = UART_GET_IP_NAME(port);
+	u32 version;
 	int usart, uart;
 	/* usart and uart ascii */
 	usart = 0x55534152;
@@ -1517,7 +1519,22 @@
 		dev_dbg(port->dev, "This is uart\n");
 		atmel_port->is_usart = false;
 	} else {
-		dev_err(port->dev, "Not supported ip name, set to uart\n");
+		/* fallback for older SoCs: use version field */
+		version = UART_GET_IP_VERSION(port);
+		switch (version) {
+		case 0x302:
+		case 0x10213:
+			dev_dbg(port->dev, "This version is usart\n");
+			atmel_port->is_usart = true;
+			break;
+		case 0x203:
+		case 0x10202:
+			dev_dbg(port->dev, "This version is uart\n");
+			atmel_port->is_usart = false;
+			break;
+		default:
+			dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
+		}
 	}
 }
 
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 87636cc..4f22970 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -766,9 +766,8 @@
 			return -ENOMEM;
 		}
 
-		ret = peripheral_request_list(
-			(unsigned short *)dev_get_platdata(&pdev->dev),
-			DRV_NAME);
+		ret = peripheral_request_list(dev_get_platdata(&pdev->dev),
+						DRV_NAME);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"Fail to request SPORT peripherals\n");
@@ -844,8 +843,7 @@
 out_error_unmap:
 		iounmap(sport->port.membase);
 out_error_free_peripherals:
-		peripheral_free_list(
-			(unsigned short *)dev_get_platdata(&pdev->dev));
+		peripheral_free_list(dev_get_platdata(&pdev->dev));
 out_error_free_mem:
 		kfree(sport);
 		bfin_sport_uart_ports[pdev->id] = NULL;
@@ -864,8 +862,7 @@
 	if (sport) {
 		uart_remove_one_port(&sport_uart_reg, &sport->port);
 		iounmap(sport->port.membase);
-		peripheral_free_list(
-			(unsigned short *)dev_get_platdata(&pdev->dev));
+		peripheral_free_list(dev_get_platdata(&pdev->dev));
 		kfree(sport);
 		bfin_sport_uart_ports[pdev->id] = NULL;
 	}
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 3c75e8e..869ceba 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -680,7 +680,7 @@
 		default:
 			uart_dma_ch_rx = uart_dma_ch_tx = 0;
 			break;
-		};
+		}
 
 		if (uart_dma_ch_rx &&
 			request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
@@ -726,7 +726,7 @@
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->cts_pin >= 0) {
 		if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
-			IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+			0, "BFIN_UART_MODEM_STATUS", uart)) {
 			uart->cts_pin = -1;
 			dev_info(port->dev, "Unable to attach BlackFin UART Modem Status interrupt.\n");
 		}
@@ -765,7 +765,7 @@
 		break;
 	default:
 		break;
-	};
+	}
 #endif
 	free_irq(uart->rx_irq, uart);
 	free_irq(uart->tx_irq, uart);
@@ -1240,7 +1240,7 @@
 			 */
 #endif
 		ret = peripheral_request_list(
-			(unsigned short *)dev_get_platdata(&pdev->dev),
+			dev_get_platdata(&pdev->dev),
 			DRIVER_NAME);
 		if (ret) {
 			dev_err(&pdev->dev,
@@ -1358,8 +1358,7 @@
 out_error_unmap:
 		iounmap(uart->port.membase);
 out_error_free_peripherals:
-		peripheral_free_list(
-			(unsigned short *)dev_get_platdata(&pdev->dev));
+		peripheral_free_list(dev_get_platdata(&pdev->dev));
 out_error_free_mem:
 		kfree(uart);
 		bfin_serial_ports[pdev->id] = NULL;
@@ -1377,8 +1376,7 @@
 	if (uart) {
 		uart_remove_one_port(&bfin_serial_reg, &uart->port);
 		iounmap(uart->port.membase);
-		peripheral_free_list(
-			(unsigned short *)dev_get_platdata(&pdev->dev));
+		peripheral_free_list(dev_get_platdata(&pdev->dev));
 		kfree(uart);
 		bfin_serial_ports[pdev->id] = NULL;
 	}
@@ -1432,8 +1430,8 @@
 		return -ENOENT;
 	}
 
-	ret = peripheral_request_list(
-		(unsigned short *)dev_get_platdata(&pdev->dev), DRIVER_NAME);
+	ret = peripheral_request_list(dev_get_platdata(&pdev->dev),
+					DRIVER_NAME);
 	if (ret) {
 		dev_err(&pdev->dev,
 				"fail to request bfin serial peripherals\n");
@@ -1463,8 +1461,7 @@
 	return 0;
 
 out_error_free_peripherals:
-	peripheral_free_list(
-		(unsigned short *)dev_get_platdata(&pdev->dev));
+	peripheral_free_list(dev_get_platdata(&pdev->dev));
 
 	return ret;
 }
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 7e4e408..8d0b994 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -459,7 +459,6 @@
 	ret = uart_register_driver(&s->uart);
 	if (ret) {
 		dev_err(&pdev->dev, "Registering UART driver failed\n");
-		devm_clk_put(&pdev->dev, s->uart_clk);
 		return ret;
 	}
 
@@ -487,7 +486,6 @@
 	for (i = 0; i < UART_CLPS711X_NR; i++)
 		uart_remove_one_port(&s->uart, &s->port[i]);
 
-	devm_clk_put(&pdev->dev, s->uart_clk);
 	uart_unregister_driver(&s->uart);
 
 	return 0;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index af286e6..5903909 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1008,7 +1008,7 @@
 		return -ENODEV;
 	}
 
-	pl_data = (struct ifx_modem_platform_data *)dev_get_platdata(&spi->dev);
+	pl_data = dev_get_platdata(&spi->dev);
 	if (!pl_data) {
 		dev_err(&spi->dev, "missing platform data!");
 		return -ENODEV;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 042aa07..b2cfdb6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -223,8 +223,7 @@
 	struct dma_chan		*dma_chan_rx, *dma_chan_tx;
 	struct scatterlist	rx_sgl, tx_sgl[2];
 	void			*rx_buf;
-	unsigned int		rx_bytes, tx_bytes;
-	struct work_struct	tsk_dma_rx, tsk_dma_tx;
+	unsigned int		tx_bytes;
 	unsigned int		dma_tx_nents;
 	wait_queue_head_t	dma_wait;
 };
@@ -505,34 +504,25 @@
 		dev_dbg(sport->port.dev, "exit in %s.\n", __func__);
 		return;
 	}
-
-	schedule_work(&sport->tsk_dma_tx);
 }
 
-static void dma_tx_work(struct work_struct *w)
+static void imx_dma_tx(struct imx_port *sport)
 {
-	struct imx_port *sport = container_of(w, struct imx_port, tsk_dma_tx);
 	struct circ_buf *xmit = &sport->port.state->xmit;
 	struct scatterlist *sgl = sport->tx_sgl;
 	struct dma_async_tx_descriptor *desc;
 	struct dma_chan	*chan = sport->dma_chan_tx;
 	struct device *dev = sport->port.dev;
 	enum dma_status status;
-	unsigned long flags;
 	int ret;
 
-	status = chan->device->device_tx_status(chan, (dma_cookie_t)0, NULL);
+	status = dmaengine_tx_status(chan, (dma_cookie_t)0, NULL);
 	if (DMA_IN_PROGRESS == status)
 		return;
 
-	spin_lock_irqsave(&sport->port.lock, flags);
 	sport->tx_bytes = uart_circ_chars_pending(xmit);
-	if (sport->tx_bytes == 0) {
-		spin_unlock_irqrestore(&sport->port.lock, flags);
-		return;
-	}
 
-	if (xmit->tail > xmit->head) {
+	if (xmit->tail > xmit->head && xmit->head > 0) {
 		sport->dma_tx_nents = 2;
 		sg_init_table(sgl, 2);
 		sg_set_buf(sgl, xmit->buf + xmit->tail,
@@ -542,7 +532,6 @@
 		sport->dma_tx_nents = 1;
 		sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
 	}
-	spin_unlock_irqrestore(&sport->port.lock, flags);
 
 	ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
 	if (ret == 0) {
@@ -609,11 +598,7 @@
 	}
 
 	if (sport->dma_is_enabled) {
-		/*
-		 * We may in the interrupt context, so arise a work_struct to
-		 * do the real job.
-		 */
-		schedule_work(&sport->tsk_dma_tx);
+		imx_dma_tx(sport);
 		return;
 	}
 
@@ -732,6 +717,7 @@
 	return IRQ_HANDLED;
 }
 
+static int start_rx_dma(struct imx_port *sport);
 /*
  * If the RXFIFO is filled with some data, and then we
  * arise a DMA operation to receive them.
@@ -750,7 +736,7 @@
 		writel(temp, sport->port.membase + UCR1);
 
 		/* tell the DMA to receive the data. */
-		schedule_work(&sport->tsk_dma_rx);
+		start_rx_dma(sport);
 	}
 }
 
@@ -795,8 +781,15 @@
 static unsigned int imx_tx_empty(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
+	unsigned int ret;
 
-	return (readl(sport->port.membase + USR2) & USR2_TXDC) ?  TIOCSER_TEMT : 0;
+	ret = (readl(sport->port.membase + USR2) & USR2_TXDC) ?  TIOCSER_TEMT : 0;
+
+	/* If the TX DMA is working, return 0. */
+	if (sport->dma_is_enabled && sport->dma_is_txing)
+		ret = 0;
+
+	return ret;
 }
 
 /*
@@ -865,22 +858,6 @@
 }
 
 #define RX_BUF_SIZE	(PAGE_SIZE)
-static int start_rx_dma(struct imx_port *sport);
-static void dma_rx_work(struct work_struct *w)
-{
-	struct imx_port *sport = container_of(w, struct imx_port, tsk_dma_rx);
-	struct tty_port *port = &sport->port.state->port;
-
-	if (sport->rx_bytes) {
-		tty_insert_flip_string(port, sport->rx_buf, sport->rx_bytes);
-		tty_flip_buffer_push(port);
-		sport->rx_bytes = 0;
-	}
-
-	if (sport->dma_is_rxing)
-		start_rx_dma(sport);
-}
-
 static void imx_rx_dma_done(struct imx_port *sport)
 {
 	unsigned long temp;
@@ -912,6 +889,7 @@
 	struct imx_port *sport = data;
 	struct dma_chan	*chan = sport->dma_chan_rx;
 	struct scatterlist *sgl = &sport->rx_sgl;
+	struct tty_port *port = &sport->port.state->port;
 	struct dma_tx_state state;
 	enum dma_status status;
 	unsigned int count;
@@ -919,13 +897,15 @@
 	/* unmap it first */
 	dma_unmap_sg(sport->port.dev, sgl, 1, DMA_FROM_DEVICE);
 
-	status = chan->device->device_tx_status(chan, (dma_cookie_t)0, &state);
+	status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
 	count = RX_BUF_SIZE - state.residue;
 	dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
 
 	if (count) {
-		sport->rx_bytes = count;
-		schedule_work(&sport->tsk_dma_rx);
+		tty_insert_flip_string(port, sport->rx_buf, count);
+		tty_flip_buffer_push(port);
+
+		start_rx_dma(sport);
 	} else
 		imx_rx_dma_done(sport);
 }
@@ -1007,7 +987,6 @@
 		ret = -ENOMEM;
 		goto err;
 	}
-	sport->rx_bytes = 0;
 
 	/* Prepare for TX : */
 	sport->dma_chan_tx = dma_request_slave_channel(dev, "tx");
@@ -1038,11 +1017,7 @@
 static void imx_enable_dma(struct imx_port *sport)
 {
 	unsigned long temp;
-	struct tty_port *port = &sport->port.state->port;
 
-	port->low_latency = 1;
-	INIT_WORK(&sport->tsk_dma_tx, dma_tx_work);
-	INIT_WORK(&sport->tsk_dma_rx, dma_rx_work);
 	init_waitqueue_head(&sport->dma_wait);
 
 	/* set UCR1 */
@@ -1063,7 +1038,6 @@
 static void imx_disable_dma(struct imx_port *sport)
 {
 	unsigned long temp;
-	struct tty_port *port = &sport->port.state->port;
 
 	/* clear UCR1 */
 	temp = readl(sport->port.membase + UCR1);
@@ -1081,7 +1055,6 @@
 	writel(temp, sport->port.membase + UCR4);
 
 	sport->dma_is_enabled = 0;
-	port->low_latency = 0;
 }
 
 /* half the RX buffer size */
@@ -1303,6 +1276,16 @@
 	clk_disable_unprepare(sport->clk_ipg);
 }
 
+static void imx_flush_buffer(struct uart_port *port)
+{
+	struct imx_port *sport = (struct imx_port *)port;
+
+	if (sport->dma_is_enabled) {
+		sport->tx_bytes = 0;
+		dmaengine_terminate_all(sport->dma_chan_tx);
+	}
+}
+
 static void
 imx_set_termios(struct uart_port *port, struct ktermios *termios,
 		   struct ktermios *old)
@@ -1539,7 +1522,7 @@
 		ret = -EINVAL;
 	if (sport->port.uartclk / 16 != ser->baud_base)
 		ret = -EINVAL;
-	if ((void *)sport->port.mapbase != ser->iomem_base)
+	if (sport->port.mapbase != (unsigned long)ser->iomem_base)
 		ret = -EINVAL;
 	if (sport->port.iobase != ser->port)
 		ret = -EINVAL;
@@ -1623,6 +1606,7 @@
 	.break_ctl	= imx_break_ctl,
 	.startup	= imx_startup,
 	.shutdown	= imx_shutdown,
+	.flush_buffer	= imx_flush_buffer,
 	.set_termios	= imx_set_termios,
 	.type		= imx_type,
 	.release_port	= imx_release_port,
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index cb3c81e..1d94205 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -832,7 +832,7 @@
 		up->curregs[5] |= Tx8;
 		up->parity_mask = 0xff;
 		break;
-	};
+	}
 	up->curregs[4] &= ~0x0c;
 	if (cflag & CSTOPB)
 		up->curregs[4] |= SB2;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index b2e707aa..8d71e40 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -690,7 +690,7 @@
 			max310x_port_write(port, MAX310X_THR_REG,
 					   xmit->buf[xmit->tail]);
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		};
+		}
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index d3db042..52c930f 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -293,7 +293,7 @@
 	serial_out(up, UART_IER, up->ier);
 }
 
-void hsu_dma_tx(struct uart_hsu_port *up)
+static void hsu_dma_tx(struct uart_hsu_port *up)
 {
 	struct circ_buf *xmit = &up->port.state->xmit;
 	struct hsu_dma_buffer *dbuf = &up->txbuf;
@@ -340,7 +340,8 @@
 }
 
 /* The buffer is already cache coherent */
-void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf)
+static void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc,
+					struct hsu_dma_buffer *dbuf)
 {
 	dbuf->ofs = 0;
 
@@ -386,7 +387,8 @@
 
 /* This is always called in spinlock protected mode, so
  * modify timeout timer is safe here */
-void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts, unsigned long *flags)
+static void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts,
+			unsigned long *flags)
 {
 	struct hsu_dma_buffer *dbuf = &up->rxbuf;
 	struct hsu_dma_chan *chan = up->rxc;
@@ -1183,7 +1185,7 @@
 #define SERIAL_HSU_CONSOLE	NULL
 #endif
 
-struct uart_ops serial_hsu_pops = {
+static struct uart_ops serial_hsu_pops = {
 	.tx_empty	= serial_hsu_tx_empty,
 	.set_mctrl	= serial_hsu_set_mctrl,
 	.get_mctrl	= serial_hsu_get_mctrl,
@@ -1451,7 +1453,6 @@
 		uart_remove_one_port(&serial_hsu_reg, &up->port);
 	}
 
-	pci_set_drvdata(pdev, NULL);
 	free_irq(pdev->irq, priv);
 	pci_disable_device(pdev);
 }
@@ -1504,4 +1505,4 @@
 module_exit(hsu_pci_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:medfield-hsu");
+MODULE_DEVICE_TABLE(pci, pci_ids);
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 5be1df3..ec06505 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1301,7 +1301,6 @@
 	.shutdown	= mpc52xx_uart_shutdown,
 	.set_termios	= mpc52xx_uart_set_termios,
 /*	.pm		= mpc52xx_uart_pm,		Not supported yet */
-/*	.set_wake	= mpc52xx_uart_set_wake,	Not supported yet */
 	.type		= mpc52xx_uart_type,
 	.release_port	= mpc52xx_uart_release_port,
 	.request_port	= mpc52xx_uart_request_port,
@@ -1766,7 +1765,7 @@
 static int
 mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
 {
-	struct uart_port *port = (struct uart_port *) platform_get_drvdata(op);
+	struct uart_port *port = platform_get_drvdata(op);
 
 	if (port)
 		uart_suspend_port(&mpc52xx_uart_driver, port);
@@ -1777,7 +1776,7 @@
 static int
 mpc52xx_uart_of_resume(struct platform_device *op)
 {
-	struct uart_port *port = (struct uart_port *) platform_get_drvdata(op);
+	struct uart_port *port = platform_get_drvdata(op);
 
 	if (port)
 		uart_resume_port(&mpc52xx_uart_driver, port);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 8d70267..e30a3ca 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -2030,7 +2030,7 @@
 {
 	struct mpsc_pdata	*pdata;
 
-	pdata = (struct mpsc_pdata *)dev_get_platdata(&pd->dev);
+	pdata = dev_get_platdata(&pd->dev);
 
 	pi->port.uartclk = pdata->brg_clk_freq;
 	pi->port.iotype = UPIO_MEM;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a67e708..db0448a 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -43,6 +43,7 @@
 
 #include <linux/kthread.h>
 #include <linux/spi/spi.h>
+#include <linux/pm.h>
 
 #include "mrst_max3110.h"
 
@@ -61,6 +62,7 @@
 	struct task_struct *main_thread;
 	struct task_struct *read_thread;
 	struct mutex thread_mutex;
+	struct mutex io_mutex;
 
 	u32 baud;
 	u16 cur_conf;
@@ -90,6 +92,7 @@
 	struct spi_transfer	x;
 	int ret;
 
+	mutex_lock(&max->io_mutex);
 	spi_message_init(&message);
 	memset(&x, 0, sizeof x);
 	x.len = len;
@@ -104,6 +107,7 @@
 
 	/* Do the i/o */
 	ret = spi_sync(spi, &message);
+	mutex_unlock(&max->io_mutex);
 	return ret;
 }
 
@@ -491,19 +495,9 @@
 	port->state->port.low_latency = 1;
 
 	if (max->irq) {
-		max->read_thread = NULL;
-		ret = request_irq(max->irq, serial_m3110_irq,
-				IRQ_TYPE_EDGE_FALLING, "max3110", max);
-		if (ret) {
-			max->irq = 0;
-			pr_err(PR_FMT "unable to allocate IRQ, polling\n");
-		}  else {
-			/* Enable RX IRQ only */
-			config |= WC_RXA_IRQ_ENABLE;
-		}
-	}
-
-	if (max->irq == 0) {
+		/* Enable RX IRQ only */
+		config |= WC_RXA_IRQ_ENABLE;
+	} else {
 		/* If IRQ is disabled, start a read thread for input data */
 		max->read_thread =
 			kthread_run(max3110_read_thread, max, "max3110_read");
@@ -517,8 +511,6 @@
 
 	ret = max3110_out(max, config);
 	if (ret) {
-		if (max->irq)
-			free_irq(max->irq, max);
 		if (max->read_thread)
 			kthread_stop(max->read_thread);
 		max->read_thread = NULL;
@@ -540,9 +532,6 @@
 		max->read_thread = NULL;
 	}
 
-	if (max->irq)
-		free_irq(max->irq, max);
-
 	/* Disable interrupts from this port */
 	config = WC_TAG | WC_SW_SHDI;
 	max3110_out(max, config);
@@ -749,7 +738,8 @@
 	struct spi_device *spi = to_spi_device(dev);
 	struct uart_max3110 *max = spi_get_drvdata(spi);
 
-	disable_irq(max->irq);
+	if (max->irq > 0)
+		disable_irq(max->irq);
 	uart_suspend_port(&serial_m3110_reg, &max->port);
 	max3110_out(max, max->cur_conf | WC_SW_SHDI);
 	return 0;
@@ -762,7 +752,8 @@
 
 	max3110_out(max, max->cur_conf);
 	uart_resume_port(&serial_m3110_reg, &max->port);
-	enable_irq(max->irq);
+	if (max->irq > 0)
+		enable_irq(max->irq);
 	return 0;
 }
 
@@ -803,6 +794,7 @@
 	max->irq = (u16)spi->irq;
 
 	mutex_init(&max->thread_mutex);
+	mutex_init(&max->io_mutex);
 
 	max->word_7bits = 0;
 	max->parity = 0;
@@ -840,6 +832,16 @@
 		goto err_kthread;
 	}
 
+	if (max->irq) {
+		ret = request_irq(max->irq, serial_m3110_irq,
+				IRQ_TYPE_EDGE_FALLING, "max3110", max);
+		if (ret) {
+			max->irq = 0;
+			dev_warn(&spi->dev,
+			"unable to allocate IRQ, will use polling method\n");
+		}
+	}
+
 	spi_set_drvdata(spi, max);
 	pmax = max;
 
@@ -867,6 +869,9 @@
 
 	free_page((unsigned long)max->con_xmit.buf);
 
+	if (max->irq)
+		free_irq(max->irq, max);
+
 	if (max->main_thread)
 		kthread_stop(max->main_thread);
 
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 10e9d70..d8b6fee 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -39,6 +39,7 @@
 #include <asm/cacheflush.h>
 
 #define MXS_AUART_PORTS 5
+#define MXS_AUART_FIFO_SIZE		16
 
 #define AUART_CTRL0			0x00000000
 #define AUART_CTRL0_SET			0x00000004
@@ -548,6 +549,9 @@
 	s->flags |= MXS_AUART_DMA_ENABLED;
 	dev_dbg(s->dev, "enabled the DMA support.");
 
+	/* The DMA buffer is now the FIFO the TTY subsystem can use */
+	s->port.fifosize = UART_XMIT_SIZE;
+
 	return 0;
 
 err_out:
@@ -741,6 +745,9 @@
 	writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
 			u->membase + AUART_INTR);
 
+	/* Reset FIFO size (it could have changed if DMA was enabled) */
+	u->fifosize = MXS_AUART_FIFO_SIZE;
+
 	/*
 	 * Enable fifo so all four bytes of a DMA word are written to
 	 * output (otherwise, only the LSB is written, ie. 1 in 4 bytes)
@@ -1056,7 +1063,7 @@
 	s->port.membase = ioremap(r->start, resource_size(r));
 	s->port.ops = &mxs_auart_ops;
 	s->port.iotype = UPIO_MEM;
-	s->port.fifosize = 16;
+	s->port.fifosize = MXS_AUART_FIFO_SIZE;
 	s->port.uartclk = clk_get_rate(s->clk);
 	s->port.type = PORT_IMX;
 	s->port.dev = s->dev = &pdev->dev;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 816d1a2..fa511eb 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -39,6 +39,7 @@
 #include <linux/irq.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_data/serial-omap.h>
@@ -134,6 +135,7 @@
 	struct uart_port	port;
 	struct uart_omap_dma	uart_dma;
 	struct device		*dev;
+	int			wakeirq;
 
 	unsigned char		ier;
 	unsigned char		lcr;
@@ -175,7 +177,7 @@
 	bool			is_suspending;
 };
 
-#define to_uart_omap_port(p)	((container_of((p), struct uart_omap_port, port)))
+#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
 
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 
@@ -214,10 +216,23 @@
 	return pdata->get_context_loss_count(up->dev);
 }
 
+static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
+				       bool enable)
+{
+	if (!up->wakeirq)
+		return;
+
+	if (enable)
+		enable_irq(up->wakeirq);
+	else
+		disable_irq(up->wakeirq);
+}
+
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
 	struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
 
+	serial_omap_enable_wakeirq(up, enable);
 	if (!pdata || !pdata->enable_wakeup)
 		return;
 
@@ -242,12 +257,12 @@
 	unsigned int n16 = port->uartclk / (16 * baud);
 	int baudAbsDiff13 = baud - (port->uartclk / (13 * n13));
 	int baudAbsDiff16 = baud - (port->uartclk / (16 * n16));
-	if(baudAbsDiff13 < 0)
+	if (baudAbsDiff13 < 0)
 		baudAbsDiff13 = -baudAbsDiff13;
-	if(baudAbsDiff16 < 0)
+	if (baudAbsDiff16 < 0)
 		baudAbsDiff16 = -baudAbsDiff16;
 
-	return (baudAbsDiff13 > baudAbsDiff16);
+	return (baudAbsDiff13 >= baudAbsDiff16);
 }
 
 /*
@@ -258,13 +273,13 @@
 static unsigned int
 serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
 {
-	unsigned int divisor;
+	unsigned int mode;
 
 	if (!serial_omap_baud_is_mode16(port, baud))
-		divisor = 13;
+		mode = 13;
 	else
-		divisor = 16;
-	return port->uartclk/(baud * divisor);
+		mode = 16;
+	return port->uartclk/(mode * baud);
 }
 
 static void serial_omap_enable_ms(struct uart_port *port)
@@ -283,28 +298,40 @@
 static void serial_omap_stop_tx(struct uart_port *port)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
-	struct circ_buf *xmit = &up->port.state->xmit;
 	int res;
 
 	pm_runtime_get_sync(up->dev);
 
-	/* handle rs485 */
+	/* Handle RS-485 */
 	if (up->rs485.flags & SER_RS485_ENABLED) {
-		/* do nothing if current tx not yet completed */
-		res = serial_in(up, UART_LSR) & UART_LSR_TEMT;
-		if (!res)
-			return;
-
-		/* if there's no more data to send, turn off rts */
-		if (uart_circ_empty(xmit)) {
-			/* if rts not already disabled */
+		if (up->scr & OMAP_UART_SCR_TX_EMPTY) {
+			/* THR interrupt is fired when both TX FIFO and TX
+			 * shift register are empty. This means there's nothing
+			 * left to transmit now, so make sure the THR interrupt
+			 * is fired when TX FIFO is below the trigger level,
+			 * disable THR interrupts and toggle the RS-485 GPIO
+			 * data direction pin if needed.
+			 */
+			up->scr &= ~OMAP_UART_SCR_TX_EMPTY;
+			serial_out(up, UART_OMAP_SCR, up->scr);
 			res = (up->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0;
 			if (gpio_get_value(up->rts_gpio) != res) {
-				if (up->rs485.delay_rts_after_send > 0) {
+				if (up->rs485.delay_rts_after_send > 0)
 					mdelay(up->rs485.delay_rts_after_send);
-				}
 				gpio_set_value(up->rts_gpio, res);
 			}
+		} else {
+			/* We're asked to stop, but there's still stuff in the
+			 * UART FIFO, so make sure the THR interrupt is fired
+			 * when both TX FIFO and TX shift register are empty.
+			 * The next THR interrupt (if no transmission is started
+			 * in the meantime) will indicate the end of a
+			 * transmission. Therefore we _don't_ disable THR
+			 * interrupts in this situation.
+			 */
+			up->scr |= OMAP_UART_SCR_TX_EMPTY;
+			serial_out(up, UART_OMAP_SCR, up->scr);
+			return;
 		}
 	}
 
@@ -384,15 +411,18 @@
 
 	pm_runtime_get_sync(up->dev);
 
-	/* handle rs485 */
+	/* Handle RS-485 */
 	if (up->rs485.flags & SER_RS485_ENABLED) {
+		/* Fire THR interrupts when FIFO is below trigger level */
+		up->scr &= ~OMAP_UART_SCR_TX_EMPTY;
+		serial_out(up, UART_OMAP_SCR, up->scr);
+
 		/* if rts not already enabled */
 		res = (up->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0;
 		if (gpio_get_value(up->rts_gpio) != res) {
 			gpio_set_value(up->rts_gpio, res);
-			if (up->rs485.delay_rts_before_send > 0) {
+			if (up->rs485.delay_rts_before_send > 0)
 				mdelay(up->rs485.delay_rts_before_send);
-			}
 		}
 	}
 
@@ -699,6 +729,20 @@
 	if (retval)
 		return retval;
 
+	/* Optional wake-up IRQ */
+	if (up->wakeirq) {
+		retval = request_irq(up->wakeirq, serial_omap_irq,
+				     up->port.irqflags, up->name, up);
+		if (retval) {
+			free_irq(up->port.irq, up);
+			return retval;
+		}
+		disable_irq(up->wakeirq);
+	} else {
+		dev_info(up->port.dev, "no wakeirq for uart%d\n",
+			 up->port.line);
+	}
+
 	dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
 
 	pm_runtime_get_sync(up->dev);
@@ -787,6 +831,8 @@
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 	free_irq(up->port.irq, up);
+	if (up->wakeirq)
+		free_irq(up->wakeirq, up);
 }
 
 static void serial_omap_uart_qos_work(struct work_struct *work)
@@ -938,7 +984,7 @@
 	 */
 
 	/* Set receive FIFO threshold to 16 characters and
-	 * transmit FIFO threshold to 16 spaces
+	 * transmit FIFO threshold to 32 spaces
 	 */
 	up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
 	up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK;
@@ -1060,15 +1106,6 @@
 	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
-static int serial_omap_set_wake(struct uart_port *port, unsigned int state)
-{
-	struct uart_omap_port *up = to_uart_omap_port(port);
-
-	serial_omap_enable_wakeup(up, state);
-
-	return 0;
-}
-
 static void
 serial_omap_pm(struct uart_port *port, unsigned int state,
 	       unsigned int oldstate)
@@ -1353,6 +1390,15 @@
 	up->ier = mode;
 	serial_out(up, UART_IER, up->ier);
 
+	/* If RS-485 is disabled, make sure the THR interrupt is fired when
+	 * TX FIFO is below the trigger level.
+	 */
+	if (!(up->rs485.flags & SER_RS485_ENABLED) &&
+	    (up->scr & OMAP_UART_SCR_TX_EMPTY)) {
+		up->scr &= ~OMAP_UART_SCR_TX_EMPTY;
+		serial_out(up, UART_OMAP_SCR, up->scr);
+	}
+
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
@@ -1401,7 +1447,6 @@
 	.shutdown	= serial_omap_shutdown,
 	.set_termios	= serial_omap_set_termios,
 	.pm		= serial_omap_pm,
-	.set_wake	= serial_omap_set_wake,
 	.type		= serial_omap_type,
 	.release_port	= serial_omap_release_port,
 	.request_port	= serial_omap_request_port,
@@ -1582,11 +1627,23 @@
 	struct uart_omap_port	*up;
 	struct resource		*mem, *irq;
 	struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
-	int ret;
+	int ret, uartirq = 0, wakeirq = 0;
 
+	/* The optional wakeirq may be specified in the board dts file */
 	if (pdev->dev.of_node) {
+		uartirq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+		if (!uartirq)
+			return -EPROBE_DEFER;
+		wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1);
 		omap_up_info = of_get_uart_port_info(&pdev->dev);
 		pdev->dev.platform_data = omap_up_info;
+	} else {
+		irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		if (!irq) {
+			dev_err(&pdev->dev, "no irq resource?\n");
+			return -ENODEV;
+		}
+		uartirq = irq->start;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1595,12 +1652,6 @@
 		return -ENODEV;
 	}
 
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "no irq resource?\n");
-		return -ENODEV;
-	}
-
 	if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
 				pdev->dev.driver->name)) {
 		dev_err(&pdev->dev, "memory region already claimed\n");
@@ -1634,7 +1685,8 @@
 	up->port.dev = &pdev->dev;
 	up->port.type = PORT_OMAP;
 	up->port.iotype = UPIO_MEM;
-	up->port.irq = irq->start;
+	up->port.irq = uartirq;
+	up->wakeirq = wakeirq;
 
 	up->port.regshift = 2;
 	up->port.fifosize = 64;
@@ -1670,8 +1722,9 @@
 	up->port.uartclk = omap_up_info->uartclk;
 	if (!up->port.uartclk) {
 		up->port.uartclk = DEFAULT_CLK_SPEED;
-		dev_warn(&pdev->dev, "No clock speed specified: using default:"
-						"%d\n", DEFAULT_CLK_SPEED);
+		dev_warn(&pdev->dev,
+			 "No clock speed specified: using default: %d\n",
+			 DEFAULT_CLK_SPEED);
 	}
 
 	up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 44077c0..0aa2b52 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1614,7 +1614,6 @@
 	.shutdown = pch_uart_shutdown,
 	.set_termios = pch_uart_set_termios,
 /*	.pm		= pch_uart_pm,		Not supported yet */
-/*	.set_wake	= pch_uart_set_wake,	Not supported yet */
 	.type = pch_uart_type,
 	.release_port = pch_uart_release_port,
 	.request_port = pch_uart_request_port,
@@ -1996,6 +1995,8 @@
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
+MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
+
 module_param(default_baud, uint, S_IRUGO);
 MODULE_PARM_DESC(default_baud,
                  "Default BAUD for initial driver state and console (default 9600)");
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index f87f1a0..95917ce 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1072,7 +1072,7 @@
 		uap->curregs[5] |= Tx8;
 		uap->parity_mask = 0xff;
 		break;
-	};
+	}
 	uap->curregs[4] &= ~(SB_MASK);
 	if (cflag & CSTOPB)
 		uap->curregs[4] |= SB2;
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index ba25722..753d452 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -647,7 +647,10 @@
 		sa1100_pops.set_mctrl = fns->set_mctrl;
 
 	sa1100_pops.pm       = fns->pm;
-	sa1100_pops.set_wake = fns->set_wake;
+	/*
+	 * FIXME: fns->set_wake is unused - this should be called from
+	 * the suspend() callback if device_may_wakeup(dev)) is set.
+	 */
 }
 
 void __init sa1100_register_uart(int idx, int port)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index f3dfa19..c1af04d 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -407,7 +407,14 @@
 
 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* todo - possibly remove AFC and do manual CTS */
+	unsigned int umcon = rd_regl(port, S3C2410_UMCON);
+
+	if (mctrl & TIOCM_RTS)
+		umcon |= S3C2410_UMCOM_RTS_LOW;
+	else
+		umcon &= ~S3C2410_UMCOM_RTS_LOW;
+
+	wr_regl(port, S3C2410_UMCON, umcon);
 }
 
 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
@@ -774,8 +781,6 @@
 	if (termios->c_cflag & CSTOPB)
 		ulcon |= S3C2410_LCON_STOPB;
 
-	umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
-
 	if (termios->c_cflag & PARENB) {
 		if (termios->c_cflag & PARODD)
 			ulcon |= S3C2410_LCON_PODD;
@@ -792,6 +797,15 @@
 
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
+
+	umcon = rd_regl(port, S3C2410_UMCON);
+	if (termios->c_cflag & CRTSCTS) {
+		umcon |= S3C2410_UMCOM_AFC;
+		/* Disable RTS when RX FIFO contains 63 bytes */
+		umcon &= ~S3C2412_UMCON_AFC_8;
+	} else {
+		umcon &= ~S3C2410_UMCOM_AFC;
+	}
 	wr_regl(port, S3C2410_UMCON, umcon);
 
 	if (ourport->info->has_divslot)
@@ -1254,7 +1268,7 @@
 	ourport->baudclk = ERR_PTR(-EINVAL);
 	ourport->info = ourport->drv_data->info;
 	ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
-			(struct s3c2410_uartcfg *)dev_get_platdata(&pdev->dev) :
+			dev_get_platdata(&pdev->dev) :
 			ourport->drv_data->def_cfg;
 
 	ourport->port.fifosize = (ourport->info->fifosize) ?
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index aaa617a..8827e54 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -63,7 +63,7 @@
 
 /* conversion functions */
 
-#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
+#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
 
 /* register access controls */
 
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 49e9bbf..a447f71 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -986,6 +986,7 @@
 		return 0;
 	}
 
+	uart_unregister_driver(&s->uart);
 err_out:
 	if (!IS_ERR(s->regulator))
 		return regulator_disable(s->regulator);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 0489a2b..dfe79cc 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1018,7 +1018,7 @@
 		goto fail_hw_init;
 	}
 
-	ret = request_irq(u->irq, tegra_uart_isr, IRQF_DISABLED,
+	ret = request_irq(u->irq, tegra_uart_isr, 0,
 				dev_name(u->dev), tup);
 	if (ret < 0) {
 		dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq);
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 440a962..90a080b 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1220,8 +1220,6 @@
 {
 	struct uart_txx9_port *up = pci_get_drvdata(dev);
 
-	pci_set_drvdata(dev, NULL);
-
 	if (up) {
 		serial_txx9_unregister_port(up->port.line);
 		pci_disable_device(dev);
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 61c1ad0..f186a8f 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -529,7 +529,7 @@
 	while (sirfport->rx_completed != sirfport->rx_issued) {
 		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
 					SIRFSOC_RX_DMA_BUF_SIZE);
-		sirfsoc_rx_submit_one_dma_desc(port, sirfport->rx_completed++);
+		sirfport->rx_completed++;
 		sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
 	}
 	count = CIRC_CNT(sirfport->rx_dma_items[sirfport->rx_issued].xmit.head,
@@ -706,12 +706,19 @@
 {
 	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
 	struct uart_port *port = &sirfport->port;
+	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
+	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 	unsigned long flags;
 	spin_lock_irqsave(&sirfport->rx_lock, flags);
 	while (sirfport->rx_completed != sirfport->rx_issued) {
 		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
 					SIRFSOC_RX_DMA_BUF_SIZE);
-		sirfsoc_rx_submit_one_dma_desc(port, sirfport->rx_completed++);
+		if (rd_regl(port, ureg->sirfsoc_int_en_reg) &
+				uint_en->sirfsoc_rx_timeout_en)
+			sirfsoc_rx_submit_one_dma_desc(port,
+					sirfport->rx_completed++);
+		else
+			sirfport->rx_completed++;
 		sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
 	}
 	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index fb8d0a0..b7d679c 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -368,15 +368,6 @@
 #define SIRFSOC_UART_NR				6
 #define SIRFSOC_PORT_TYPE			0xa5
 
-/* Baud Rate Calculation */
-#define SIRF_MIN_SAMPLE_DIV			0xf
-#define SIRF_MAX_SAMPLE_DIV			0x3f
-#define SIRF_IOCLK_DIV_MAX			0xffff
-#define SIRF_SAMPLE_DIV_SHIFT			16
-#define SIRF_IOCLK_DIV_MASK			0xffff
-#define SIRF_SAMPLE_DIV_MASK			0x3f0000
-#define SIRF_BAUD_RATE_SUPPORT_NR		18
-
 /* Uart Common Use Macro*/
 #define SIRFSOC_RX_DMA_BUF_SIZE	256
 #define BYTES_TO_ALIGN(dma_addr)	((unsigned long)(dma_addr) & 0x3)
@@ -453,9 +444,6 @@
 	int				rx_issued;
 };
 
-/* Hardware Flow Control */
-#define SIRFUART_AFC_CTRL_RX_THD	0x70
-
 /* Register Access Control */
 #define portaddr(port, reg)		((port)->membase + (reg))
 #define rd_regb(port, reg)		(__raw_readb(portaddr(port, reg)))
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 5d6136b2..380fb53 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -894,7 +894,7 @@
 	case B115200: baud = 115200; break;
 	case B230400: baud = 230400; break;
 	case B460800: baud = 460800; break;
-	};
+	}
 
 	/*
 	 * Temporary fix.
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 699cc1b..db79b76 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -522,7 +522,7 @@
 				serio_interrupt(&up->serio, ch, 0);
 #endif
 				break;
-			};
+			}
 		}
 	} while (serial_in(up, UART_LSR) & UART_LSR_DR);
 }
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 135a152..45a8c6a 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -319,7 +319,7 @@
 				serio_interrupt(&up->serio, ch, 0);
 #endif
 			break;
-		};
+		}
 	}
 }
 
@@ -897,7 +897,7 @@
 		up->curregs[R5] |= Tx8;
 		up->parity_mask = 0xff;
 		break;
-	};
+	}
 	up->curregs[R4] &= ~0x0c;
 	if (cflag & CSTOPB)
 		up->curregs[R4] |= SB2;
@@ -1239,7 +1239,7 @@
 	default: case B9600: baud = 9600; break;
 	case B19200: baud = 19200; break;
 	case B38400: baud = 38400; break;
-	};
+	}
 
 	brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
 
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 8831748..2fd1e17 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -269,7 +269,7 @@
 			return 1;
 
 		bdp++;
-	};
+	}
 }
 
 /*
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 7e4150a..e46e9f3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1,7 +1,7 @@
 /*
  * Xilinx PS UART driver
  *
- * 2011 (c) Xilinx Inc.
+ * 2011 - 2013 (C) Xilinx Inc.
  *
  * This program is free software; you can redistribute it
  * and/or modify it under the terms of the GNU General Public
@@ -11,13 +11,17 @@
  *
  */
 
+#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/platform_device.h>
 #include <linux/serial.h>
+#include <linux/console.h>
 #include <linux/serial_core.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
-#include <linux/console.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -29,12 +33,22 @@
 #define XUARTPS_MAJOR		0	/* use dynamic node allocation */
 #define XUARTPS_MINOR		0	/* works best with devtmpfs */
 #define XUARTPS_NR_PORTS	2
-#define XUARTPS_FIFO_SIZE	16	/* FIFO size */
+#define XUARTPS_FIFO_SIZE	64	/* FIFO size */
 #define XUARTPS_REGISTER_SPACE	0xFFF
 
 #define xuartps_readl(offset)		ioread32(port->membase + offset)
 #define xuartps_writel(val, offset)	iowrite32(val, port->membase + offset)
 
+/* Rx Trigger level */
+static int rx_trigger_level = 56;
+module_param(rx_trigger_level, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
+
+/* Rx Timeout */
+static int rx_timeout = 10;
+module_param(rx_timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
+
 /********************************Register Map********************************/
 /** UART
  *
@@ -128,6 +142,9 @@
 #define XUARTPS_IXR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt. */
 #define XUARTPS_IXR_MASK	0x00001FFF /* Valid bit mask */
 
+/* Goes in read_status_mask for break detection as the HW doesn't do it*/
+#define XUARTPS_IXR_BRK		0x80000000
+
 /** Channel Status Register
  *
  * The channel status register (CSR) is provided to enable the control logic
@@ -139,15 +156,27 @@
 #define XUARTPS_SR_TXFULL	0x00000010 /* TX FIFO full */
 #define XUARTPS_SR_RXTRIG	0x00000001 /* Rx Trigger */
 
+/* baud dividers min/max values */
+#define XUARTPS_BDIV_MIN	4
+#define XUARTPS_BDIV_MAX	255
+#define XUARTPS_CD_MAX		65535
+
 /**
  * struct xuartps - device data
- * @refclk	Reference clock
- * @aperclk	APB clock
+ * @port		Pointer to the UART port
+ * @refclk		Reference clock
+ * @aperclk		APB clock
+ * @baud		Current baud rate
+ * @clk_rate_change_nb	Notifier block for clock changes
  */
 struct xuartps {
+	struct uart_port	*port;
 	struct clk		*refclk;
 	struct clk		*aperclk;
+	unsigned int		baud;
+	struct notifier_block	clk_rate_change_nb;
 };
+#define to_xuartps(_nb) container_of(_nb, struct xuartps, clk_rate_change_nb);
 
 /**
  * xuartps_isr - Interrupt handler
@@ -171,6 +200,23 @@
 	 */
 	isrstatus = xuartps_readl(XUARTPS_ISR_OFFSET);
 
+	/*
+	 * There is no hardware break detection, so we interpret framing
+	 * error with all-zeros data as a break sequence. Most of the time,
+	 * there's another non-zero byte at the end of the sequence.
+	 */
+
+	if (isrstatus & XUARTPS_IXR_FRAMING) {
+		while (!(xuartps_readl(XUARTPS_SR_OFFSET) &
+					XUARTPS_SR_RXEMPTY)) {
+			if (!xuartps_readl(XUARTPS_FIFO_OFFSET)) {
+				port->read_status_mask |= XUARTPS_IXR_BRK;
+				isrstatus &= ~XUARTPS_IXR_FRAMING;
+			}
+		}
+		xuartps_writel(XUARTPS_IXR_FRAMING, XUARTPS_ISR_OFFSET);
+	}
+
 	/* drop byte with parity error if IGNPAR specified */
 	if (isrstatus & port->ignore_status_mask & XUARTPS_IXR_PARITY)
 		isrstatus &= ~(XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT);
@@ -184,6 +230,30 @@
 		while ((xuartps_readl(XUARTPS_SR_OFFSET) &
 			XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
 			data = xuartps_readl(XUARTPS_FIFO_OFFSET);
+
+			/* Non-NULL byte after BREAK is garbage (99%) */
+			if (data && (port->read_status_mask &
+						XUARTPS_IXR_BRK)) {
+				port->read_status_mask &= ~XUARTPS_IXR_BRK;
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			}
+
+			/*
+			 * uart_handle_sysrq_char() doesn't work if
+			 * spinlocked, for some reason
+			 */
+			 if (port->sysrq) {
+				spin_unlock(&port->lock);
+				if (uart_handle_sysrq_char(port,
+							(unsigned char)data)) {
+					spin_lock(&port->lock);
+					continue;
+				}
+				spin_lock(&port->lock);
+			}
+
 			port->icount.rx++;
 
 			if (isrstatus & XUARTPS_IXR_PARITY) {
@@ -247,63 +317,196 @@
 }
 
 /**
- * xuartps_set_baud_rate - Calculate and set the baud rate
- * @port: Handle to the uart port structure
- * @baud: Baud rate to set
- *
+ * xuartps_calc_baud_divs - Calculate baud rate divisors
+ * @clk: UART module input clock
+ * @baud: Desired baud rate
+ * @rbdiv: BDIV value (return value)
+ * @rcd: CD value (return value)
+ * @div8: Value for clk_sel bit in mod (return value)
  * Returns baud rate, requested baud when possible, or actual baud when there
- *	was too much error
- **/
-static unsigned int xuartps_set_baud_rate(struct uart_port *port,
-						unsigned int baud)
+ *	was too much error, zero if no valid divisors are found.
+ *
+ * Formula to obtain baud rate is
+ *	baud_tx/rx rate = clk/CD * (BDIV + 1)
+ *	input_clk = (Uart User Defined Clock or Apb Clock)
+ *		depends on UCLKEN in MR Reg
+ *	clk = input_clk or input_clk/8;
+ *		depends on CLKS in MR reg
+ *	CD and BDIV depends on values in
+ *			baud rate generate register
+ *			baud rate clock divisor register
+ */
+static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
+		u32 *rbdiv, u32 *rcd, int *div8)
 {
-	unsigned int sel_clk;
-	unsigned int calc_baud = 0;
-	unsigned int brgr_val, brdiv_val;
+	u32 cd, bdiv;
+	unsigned int calc_baud;
+	unsigned int bestbaud = 0;
 	unsigned int bauderror;
+	unsigned int besterror = ~0;
 
-	/* Formula to obtain baud rate is
-	 *	baud_tx/rx rate = sel_clk/CD * (BDIV + 1)
-	 *	input_clk = (Uart User Defined Clock or Apb Clock)
-	 *		depends on UCLKEN in MR Reg
-	 *	sel_clk = input_clk or input_clk/8;
-	 *		depends on CLKS in MR reg
-	 *	CD and BDIV depends on values in
-	 *			baud rate generate register
-	 *			baud rate clock divisor register
-	 */
-	sel_clk = port->uartclk;
-	if (xuartps_readl(XUARTPS_MR_OFFSET) & XUARTPS_MR_CLKSEL)
-		sel_clk = sel_clk / 8;
+	if (baud < clk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX)) {
+		*div8 = 1;
+		clk /= 8;
+	} else {
+		*div8 = 0;
+	}
 
-	/* Find the best values for baud generation */
-	for (brdiv_val = 4; brdiv_val < 255; brdiv_val++) {
-
-		brgr_val = sel_clk / (baud * (brdiv_val + 1));
-		if (brgr_val < 2 || brgr_val > 65535)
+	for (bdiv = XUARTPS_BDIV_MIN; bdiv <= XUARTPS_BDIV_MAX; bdiv++) {
+		cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
+		if (cd < 1 || cd > XUARTPS_CD_MAX)
 			continue;
 
-		calc_baud = sel_clk / (brgr_val * (brdiv_val + 1));
+		calc_baud = clk / (cd * (bdiv + 1));
 
 		if (baud > calc_baud)
 			bauderror = baud - calc_baud;
 		else
 			bauderror = calc_baud - baud;
 
-		/* use the values when percent error is acceptable */
-		if (((bauderror * 100) / baud) < 3) {
-			calc_baud = baud;
-			break;
+		if (besterror > bauderror) {
+			*rbdiv = bdiv;
+			*rcd = cd;
+			bestbaud = calc_baud;
+			besterror = bauderror;
 		}
 	}
+	/* use the values when percent error is acceptable */
+	if (((besterror * 100) / baud) < 3)
+		bestbaud = baud;
 
-	/* Set the values for the new baud rate */
-	xuartps_writel(brgr_val, XUARTPS_BAUDGEN_OFFSET);
-	xuartps_writel(brdiv_val, XUARTPS_BAUDDIV_OFFSET);
+	return bestbaud;
+}
+
+/**
+ * xuartps_set_baud_rate - Calculate and set the baud rate
+ * @port: Handle to the uart port structure
+ * @baud: Baud rate to set
+ * Returns baud rate, requested baud when possible, or actual baud when there
+ *	   was too much error, zero if no valid divisors are found.
+ */
+static unsigned int xuartps_set_baud_rate(struct uart_port *port,
+		unsigned int baud)
+{
+	unsigned int calc_baud;
+	u32 cd = 0, bdiv = 0;
+	u32 mreg;
+	int div8;
+	struct xuartps *xuartps = port->private_data;
+
+	calc_baud = xuartps_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
+			&div8);
+
+	/* Write new divisors to hardware */
+	mreg = xuartps_readl(XUARTPS_MR_OFFSET);
+	if (div8)
+		mreg |= XUARTPS_MR_CLKSEL;
+	else
+		mreg &= ~XUARTPS_MR_CLKSEL;
+	xuartps_writel(mreg, XUARTPS_MR_OFFSET);
+	xuartps_writel(cd, XUARTPS_BAUDGEN_OFFSET);
+	xuartps_writel(bdiv, XUARTPS_BAUDDIV_OFFSET);
+	xuartps->baud = baud;
 
 	return calc_baud;
 }
 
+#ifdef CONFIG_COMMON_CLK
+/**
+ * xuartps_clk_notitifer_cb - Clock notifier callback
+ * @nb:		Notifier block
+ * @event:	Notify event
+ * @data:	Notifier data
+ * Returns NOTIFY_OK on success, NOTIFY_BAD on error.
+ */
+static int xuartps_clk_notifier_cb(struct notifier_block *nb,
+		unsigned long event, void *data)
+{
+	u32 ctrl_reg;
+	struct uart_port *port;
+	int locked = 0;
+	struct clk_notifier_data *ndata = data;
+	unsigned long flags = 0;
+	struct xuartps *xuartps = to_xuartps(nb);
+
+	port = xuartps->port;
+	if (port->suspended)
+		return NOTIFY_OK;
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+	{
+		u32 bdiv;
+		u32 cd;
+		int div8;
+
+		/*
+		 * Find out if current baud-rate can be achieved with new clock
+		 * frequency.
+		 */
+		if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
+					&bdiv, &cd, &div8))
+			return NOTIFY_BAD;
+
+		spin_lock_irqsave(&xuartps->port->lock, flags);
+
+		/* Disable the TX and RX to set baud rate */
+		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
+				(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
+				XUARTPS_CR_OFFSET);
+
+		spin_unlock_irqrestore(&xuartps->port->lock, flags);
+
+		return NOTIFY_OK;
+	}
+	case POST_RATE_CHANGE:
+		/*
+		 * Set clk dividers to generate correct baud with new clock
+		 * frequency.
+		 */
+
+		spin_lock_irqsave(&xuartps->port->lock, flags);
+
+		locked = 1;
+		port->uartclk = ndata->new_rate;
+
+		xuartps->baud = xuartps_set_baud_rate(xuartps->port,
+				xuartps->baud);
+		/* fall through */
+	case ABORT_RATE_CHANGE:
+		if (!locked)
+			spin_lock_irqsave(&xuartps->port->lock, flags);
+
+		/* Set TX/RX Reset */
+		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
+				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
+				XUARTPS_CR_OFFSET);
+
+		while (xuartps_readl(XUARTPS_CR_OFFSET) &
+				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+			cpu_relax();
+
+		/*
+		 * Clear the RX disable and TX disable bits and then set the TX
+		 * enable bit and RX enable bit to enable the transmitter and
+		 * receiver.
+		 */
+		xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+		ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+		xuartps_writel(
+			(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
+			(XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
+			XUARTPS_CR_OFFSET);
+
+		spin_unlock_irqrestore(&xuartps->port->lock, flags);
+
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+#endif
+
 /*----------------------Uart Operations---------------------------*/
 
 /**
@@ -346,7 +549,7 @@
 		port->state->xmit.tail = (port->state->xmit.tail + 1) &
 					(UART_XMIT_SIZE - 1);
 	}
-
+	xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET);
 	/* Enable the TX Empty interrupt */
 	xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET);
 
@@ -437,7 +640,7 @@
 				struct ktermios *termios, struct ktermios *old)
 {
 	unsigned int cval = 0;
-	unsigned int baud;
+	unsigned int baud, minbaud, maxbaud;
 	unsigned long flags;
 	unsigned int ctrl_reg, mode_reg;
 
@@ -454,8 +657,14 @@
 			(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
 			XUARTPS_CR_OFFSET);
 
-	/* Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk */
-	baud = uart_get_baud_rate(port, termios, old, 0, 10000000);
+	/*
+	 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
+	 * min and max baud should be calculated here based on port->uartclk.
+	 * this way we get a valid baud and can safely call set_baud()
+	 */
+	minbaud = port->uartclk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX * 8);
+	maxbaud = port->uartclk / (XUARTPS_BDIV_MIN + 1);
+	baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
 	baud = xuartps_set_baud_rate(port, baud);
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
@@ -480,7 +689,7 @@
 			| (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
 			XUARTPS_CR_OFFSET);
 
-	xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+	xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
 
 	port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG |
 			XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT;
@@ -531,13 +740,17 @@
 				cval |= XUARTPS_MR_PARITY_MARK;
 			else
 				cval |= XUARTPS_MR_PARITY_SPACE;
-		} else if (termios->c_cflag & PARODD)
+		} else {
+			if (termios->c_cflag & PARODD)
 				cval |= XUARTPS_MR_PARITY_ODD;
 			else
 				cval |= XUARTPS_MR_PARITY_EVEN;
-	} else
+		}
+	} else {
 		cval |= XUARTPS_MR_PARITY_NONE;
-	xuartps_writel(cval , XUARTPS_MR_OFFSET);
+	}
+	cval |= mode_reg & 1;
+	xuartps_writel(cval, XUARTPS_MR_OFFSET);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -583,11 +796,17 @@
 		| XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT,
 		 XUARTPS_MR_OFFSET);
 
-	/* Set the RX FIFO Trigger level to 14 assuming FIFO size as 16 */
-	xuartps_writel(14, XUARTPS_RXWM_OFFSET);
+	/*
+	 * Set the RX FIFO Trigger level to use most of the FIFO, but it
+	 * can be tuned with a module parameter
+	 */
+	xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
 
-	/* Receive Timeout register is enabled with value of 10 */
-	xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+	/*
+	 * Receive Timeout register is enabled but it
+	 * can be tuned with a module parameter
+	 */
+	xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
 
 	/* Clear out any pending interrupts before enabling them */
 	xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
@@ -727,6 +946,54 @@
 	/* N/A */
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int xuartps_poll_get_char(struct uart_port *port)
+{
+	u32 imr;
+	int c;
+
+	/* Disable all interrupts */
+	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
+	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+
+	/* Check if FIFO is empty */
+	if (xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)
+		c = NO_POLL_CHAR;
+	else /* Read a character */
+		c = (unsigned char) xuartps_readl(XUARTPS_FIFO_OFFSET);
+
+	/* Enable interrupts */
+	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+
+	return c;
+}
+
+static void xuartps_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	u32 imr;
+
+	/* Disable all interrupts */
+	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
+	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+
+	/* Wait until FIFO is empty */
+	while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+		cpu_relax();
+
+	/* Write a character */
+	xuartps_writel(c, XUARTPS_FIFO_OFFSET);
+
+	/* Wait until FIFO is empty */
+	while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+		cpu_relax();
+
+	/* Enable interrupts */
+	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+
+	return;
+}
+#endif
+
 /** The UART operations structure
  */
 static struct uart_ops xuartps_ops = {
@@ -759,6 +1026,10 @@
 	.config_port	= xuartps_config_port,	/* Configure when driver
 						 * adds a xuartps port
 						 */
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= xuartps_poll_get_char,
+	.poll_put_char	= xuartps_poll_put_char,
+#endif
 };
 
 static struct uart_port xuartps_port[2];
@@ -837,7 +1108,7 @@
 {
 	struct uart_port *port = &xuartps_port[co->index];
 	unsigned long flags;
-	unsigned int imr;
+	unsigned int imr, ctrl;
 	int locked = 1;
 
 	if (oops_in_progress)
@@ -849,9 +1120,19 @@
 	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
 	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
 
+	/*
+	 * Make sure that the tx part is enabled. Set the TX enable bit and
+	 * clear the TX disable bit to enable the transmitter.
+	 */
+	ctrl = xuartps_readl(XUARTPS_CR_OFFSET);
+	xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
+		XUARTPS_CR_OFFSET);
+
 	uart_console_write(port, s, count, xuartps_console_putchar);
 	xuartps_console_wait_tx(port);
 
+	xuartps_writel(ctrl, XUARTPS_CR_OFFSET);
+
 	/* restore interrupt state, it seems like there may be a h/w bug
 	 * in that the interrupt enable register should not need to be
 	 * written based on the data sheet
@@ -933,6 +1214,119 @@
 #endif
 };
 
+#ifdef CONFIG_PM_SLEEP
+/**
+ * xuartps_suspend - suspend event
+ * @device: Pointer to the device structure
+ *
+ * Returns 0
+ */
+static int xuartps_suspend(struct device *device)
+{
+	struct uart_port *port = dev_get_drvdata(device);
+	struct tty_struct *tty;
+	struct device *tty_dev;
+	int may_wake = 0;
+
+	/* Get the tty which could be NULL so don't assume it's valid */
+	tty = tty_port_tty_get(&port->state->port);
+	if (tty) {
+		tty_dev = tty->dev;
+		may_wake = device_may_wakeup(tty_dev);
+		tty_kref_put(tty);
+	}
+
+	/*
+	 * Call the API provided in serial_core.c file which handles
+	 * the suspend.
+	 */
+	uart_suspend_port(&xuartps_uart_driver, port);
+	if (console_suspend_enabled && !may_wake) {
+		struct xuartps *xuartps = port->private_data;
+
+		clk_disable(xuartps->refclk);
+		clk_disable(xuartps->aperclk);
+	} else {
+		unsigned long flags = 0;
+
+		spin_lock_irqsave(&port->lock, flags);
+		/* Empty the receive FIFO 1st before making changes */
+		while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY))
+			xuartps_readl(XUARTPS_FIFO_OFFSET);
+		/* set RX trigger level to 1 */
+		xuartps_writel(1, XUARTPS_RXWM_OFFSET);
+		/* disable RX timeout interrups */
+		xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IDR_OFFSET);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+
+	return 0;
+}
+
+/**
+ * xuartps_resume - Resume after a previous suspend
+ * @device: Pointer to the device structure
+ *
+ * Returns 0
+ */
+static int xuartps_resume(struct device *device)
+{
+	struct uart_port *port = dev_get_drvdata(device);
+	unsigned long flags = 0;
+	u32 ctrl_reg;
+	struct tty_struct *tty;
+	struct device *tty_dev;
+	int may_wake = 0;
+
+	/* Get the tty which could be NULL so don't assume it's valid */
+	tty = tty_port_tty_get(&port->state->port);
+	if (tty) {
+		tty_dev = tty->dev;
+		may_wake = device_may_wakeup(tty_dev);
+		tty_kref_put(tty);
+	}
+
+	if (console_suspend_enabled && !may_wake) {
+		struct xuartps *xuartps = port->private_data;
+
+		clk_enable(xuartps->aperclk);
+		clk_enable(xuartps->refclk);
+
+		spin_lock_irqsave(&port->lock, flags);
+
+		/* Set TX/RX Reset */
+		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
+				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
+				XUARTPS_CR_OFFSET);
+		while (xuartps_readl(XUARTPS_CR_OFFSET) &
+				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+			cpu_relax();
+
+		/* restore rx timeout value */
+		xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+		/* Enable Tx/Rx */
+		ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+		xuartps_writel(
+			(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
+			(XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
+			XUARTPS_CR_OFFSET);
+
+		spin_unlock_irqrestore(&port->lock, flags);
+	} else {
+		spin_lock_irqsave(&port->lock, flags);
+		/* restore original rx trigger level */
+		xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+		/* enable RX timeout interrupt */
+		xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+
+	return uart_resume_port(&xuartps_uart_driver, port);
+}
+#endif /* ! CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
+
 /* ---------------------------------------------------------------------
  * Platform bus binding
  */
@@ -949,27 +1343,26 @@
 	struct resource *res, *res2;
 	struct xuartps *xuartps_data;
 
-	xuartps_data = kzalloc(sizeof(*xuartps_data), GFP_KERNEL);
+	xuartps_data = devm_kzalloc(&pdev->dev, sizeof(*xuartps_data),
+			GFP_KERNEL);
 	if (!xuartps_data)
 		return -ENOMEM;
 
-	xuartps_data->aperclk = clk_get(&pdev->dev, "aper_clk");
+	xuartps_data->aperclk = devm_clk_get(&pdev->dev, "aper_clk");
 	if (IS_ERR(xuartps_data->aperclk)) {
 		dev_err(&pdev->dev, "aper_clk clock not found.\n");
-		rc = PTR_ERR(xuartps_data->aperclk);
-		goto err_out_free;
+		return PTR_ERR(xuartps_data->aperclk);
 	}
-	xuartps_data->refclk = clk_get(&pdev->dev, "ref_clk");
+	xuartps_data->refclk = devm_clk_get(&pdev->dev, "ref_clk");
 	if (IS_ERR(xuartps_data->refclk)) {
 		dev_err(&pdev->dev, "ref_clk clock not found.\n");
-		rc = PTR_ERR(xuartps_data->refclk);
-		goto err_out_clk_put_aper;
+		return PTR_ERR(xuartps_data->refclk);
 	}
 
 	rc = clk_prepare_enable(xuartps_data->aperclk);
 	if (rc) {
 		dev_err(&pdev->dev, "Unable to enable APER clock.\n");
-		goto err_out_clk_put;
+		return rc;
 	}
 	rc = clk_prepare_enable(xuartps_data->refclk);
 	if (rc) {
@@ -989,13 +1382,21 @@
 		goto err_out_clk_disable;
 	}
 
+#ifdef CONFIG_COMMON_CLK
+	xuartps_data->clk_rate_change_nb.notifier_call =
+			xuartps_clk_notifier_cb;
+	if (clk_notifier_register(xuartps_data->refclk,
+				&xuartps_data->clk_rate_change_nb))
+		dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+#endif
+
 	/* Initialize the port structure */
 	port = xuartps_get_port();
 
 	if (!port) {
 		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
 		rc = -ENODEV;
-		goto err_out_clk_disable;
+		goto err_out_notif_unreg;
 	} else {
 		/* Register the port.
 		 * This function also registers this device with the tty layer
@@ -1006,26 +1407,26 @@
 		port->dev = &pdev->dev;
 		port->uartclk = clk_get_rate(xuartps_data->refclk);
 		port->private_data = xuartps_data;
+		xuartps_data->port = port;
 		platform_set_drvdata(pdev, port);
 		rc = uart_add_one_port(&xuartps_uart_driver, port);
 		if (rc) {
 			dev_err(&pdev->dev,
 				"uart_add_one_port() failed; err=%i\n", rc);
-			goto err_out_clk_disable;
+			goto err_out_notif_unreg;
 		}
 		return 0;
 	}
 
+err_out_notif_unreg:
+#ifdef CONFIG_COMMON_CLK
+	clk_notifier_unregister(xuartps_data->refclk,
+			&xuartps_data->clk_rate_change_nb);
+#endif
 err_out_clk_disable:
 	clk_disable_unprepare(xuartps_data->refclk);
 err_out_clk_dis_aper:
 	clk_disable_unprepare(xuartps_data->aperclk);
-err_out_clk_put:
-	clk_put(xuartps_data->refclk);
-err_out_clk_put_aper:
-	clk_put(xuartps_data->aperclk);
-err_out_free:
-	kfree(xuartps_data);
 
 	return rc;
 }
@@ -1043,13 +1444,14 @@
 	int rc;
 
 	/* Remove the xuartps port from the serial core */
+#ifdef CONFIG_COMMON_CLK
+	clk_notifier_unregister(xuartps_data->refclk,
+			&xuartps_data->clk_rate_change_nb);
+#endif
 	rc = uart_remove_one_port(&xuartps_uart_driver, port);
 	port->mapbase = 0;
 	clk_disable_unprepare(xuartps_data->refclk);
 	clk_disable_unprepare(xuartps_data->aperclk);
-	clk_put(xuartps_data->refclk);
-	clk_put(xuartps_data->aperclk);
-	kfree(xuartps_data);
 	return rc;
 }
 
@@ -1067,6 +1469,7 @@
 		.owner = THIS_MODULE,
 		.name = XUARTPS_NAME,		/* Driver name */
 		.of_match_table = xuartps_of_match,
+		.pm = &xuartps_dev_pm_ops,
 		},
 };
 
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 40a9fe9..ce396ec 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -51,7 +51,7 @@
 #include <asm/irq_regs.h>
 
 /* Whether we react on sysrq keys or just ignore them */
-static int __read_mostly sysrq_enabled = SYSRQ_DEFAULT_ENABLE;
+static int __read_mostly sysrq_enabled = CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE;
 static bool __read_mostly sysrq_always_enabled;
 
 unsigned short platform_sysrq_reset_seq[] __weak = { KEY_RESERVED };
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index f597e88..c94d234 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -140,6 +140,10 @@
 static void tty_port_destructor(struct kref *kref)
 {
 	struct tty_port *port = container_of(kref, struct tty_port, kref);
+
+	/* check if last port ref was dropped before tty release */
+	if (WARN_ON(port->itty))
+		return;
 	if (port->xmit_buf)
 		free_page((unsigned long)port->xmit_buf);
 	tty_port_destroy(port);
@@ -480,8 +484,6 @@
 
 	if (port->count) {
 		spin_unlock_irqrestore(&port->lock, flags);
-		if (port->ops->drop)
-			port->ops->drop(port);
 		return 0;
 	}
 	set_bit(ASYNCB_CLOSING, &port->flags);
@@ -500,9 +502,7 @@
 	/* Flush the ldisc buffering */
 	tty_ldisc_flush(tty);
 
-	/* Don't call port->drop for the last reference. Callers will want
-	   to drop the last active reference in ->shutdown() or the tty
-	   shutdown path */
+	/* Report to caller this is the last port reference */
 	return 1;
 }
 EXPORT_SYMBOL(tty_port_close_start);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 9a8e8c5..61b1137 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1300,21 +1300,30 @@
 			case 27:
 				vc->vc_reverse = 0;
 				break;
-			case 38: /* ANSI X3.64-1979 (SCO-ish?)
-				  * Enables underscore, white foreground
-				  * with white underscore (Linux - use
-				  * default foreground).
+			case 38:
+			case 48: /* ITU T.416
+				  * Higher colour modes.
+				  * They break the usual properties of SGR codes
+				  * and thus need to be detected and ignored by
+				  * hand.  Strictly speaking, that standard also
+				  * wants : rather than ; as separators, contrary
+				  * to ECMA-48, but no one produces such codes
+				  * and almost no one accepts them.
 				  */
-				vc->vc_color = (vc->vc_def_color & 0x0f) | (vc->vc_color & 0xf0);
-				vc->vc_underline = 1;
+				i++;
+				if (i > vc->vc_npar)
+					break;
+				if (vc->vc_par[i] == 5)      /* 256 colours */
+					i++;                 /* ubiquitous */
+				else if (vc->vc_par[i] == 2) /* 24 bit colours */
+					i += 3;              /* extremely rare */
+				/* Subcommands 3 (CMY) and 4 (CMYK) are so insane
+				 * that detecting them is not worth the few extra
+				 * bytes of kernel's size.
+				 */
 				break;
-			case 39: /* ANSI X3.64-1979 (SCO-ish?)
-				  * Disable underline option.
-				  * Reset colour to default? It did this
-				  * before...
-				  */
+			case 39:
 				vc->vc_color = (vc->vc_def_color & 0x0f) | (vc->vc_color & 0xf0);
-				vc->vc_underline = 0;
 				break;
 			case 49:
 				vc->vc_color = (vc->vc_def_color & 0xf0) | (vc->vc_color & 0x0f);
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 0e808cf..67beb84 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -288,13 +288,13 @@
 		}
 		map = kzalloc(sizeof(*map), GFP_KERNEL);
 		if (!map)
-			goto err_map;
+			goto err_map_kobj;
 		kobject_init(&map->kobj, &map_attr_type);
 		map->mem = mem;
 		mem->map = map;
 		ret = kobject_add(&map->kobj, idev->map_dir, "map%d", mi);
 		if (ret)
-			goto err_map;
+			goto err_map_kobj;
 		ret = kobject_uevent(&map->kobj, KOBJ_ADD);
 		if (ret)
 			goto err_map;
@@ -313,14 +313,14 @@
 		}
 		portio = kzalloc(sizeof(*portio), GFP_KERNEL);
 		if (!portio)
-			goto err_portio;
+			goto err_portio_kobj;
 		kobject_init(&portio->kobj, &portio_attr_type);
 		portio->port = port;
 		port->portio = portio;
 		ret = kobject_add(&portio->kobj, idev->portio_dir,
 							"port%d", pi);
 		if (ret)
-			goto err_portio;
+			goto err_portio_kobj;
 		ret = kobject_uevent(&portio->kobj, KOBJ_ADD);
 		if (ret)
 			goto err_portio;
@@ -329,14 +329,18 @@
 	return 0;
 
 err_portio:
-	for (pi--; pi >= 0; pi--) {
+	pi--;
+err_portio_kobj:
+	for (; pi >= 0; pi--) {
 		port = &idev->info->port[pi];
 		portio = port->portio;
 		kobject_put(&portio->kobj);
 	}
 	kobject_put(idev->portio_dir);
 err_map:
-	for (mi--; mi>=0; mi--) {
+	mi--;
+err_map_kobj:
+	for (; mi >= 0; mi--) {
 		mem = &idev->info->mem[mi];
 		map = mem->map;
 		kobject_put(&map->kobj);
@@ -601,6 +605,7 @@
 	struct uio_device *idev = vma->vm_private_data;
 	struct page *page;
 	unsigned long offset;
+	void *addr;
 
 	int mi = uio_find_mem_index(vma);
 	if (mi < 0)
@@ -612,10 +617,11 @@
 	 */
 	offset = (vmf->pgoff - mi) << PAGE_SHIFT;
 
+	addr = (void *)(unsigned long)idev->info->mem[mi].addr + offset;
 	if (idev->info->mem[mi].memtype == UIO_MEM_LOGICAL)
-		page = virt_to_page(idev->info->mem[mi].addr + offset);
+		page = virt_to_page(addr);
 	else
-		page = vmalloc_to_page((void *)(unsigned long)idev->info->mem[mi].addr + offset);
+		page = vmalloc_to_page(addr);
 	get_page(page);
 	vmf->page = page;
 	return 0;
@@ -809,10 +815,9 @@
 
 	info->uio_dev = NULL;
 
-	idev = kzalloc(sizeof(*idev), GFP_KERNEL);
+	idev = devm_kzalloc(parent, sizeof(*idev), GFP_KERNEL);
 	if (!idev) {
-		ret = -ENOMEM;
-		goto err_kzalloc;
+		return -ENOMEM;
 	}
 
 	idev->owner = owner;
@@ -822,7 +827,7 @@
 
 	ret = uio_get_minor(idev);
 	if (ret)
-		goto err_get_minor;
+		return ret;
 
 	idev->dev = device_create(&uio_class, parent,
 				  MKDEV(uio_major, idev->minor), idev,
@@ -840,7 +845,7 @@
 	info->uio_dev = idev;
 
 	if (info->irq && (info->irq != UIO_IRQ_CUSTOM)) {
-		ret = request_irq(info->irq, uio_interrupt,
+		ret = devm_request_irq(parent, info->irq, uio_interrupt,
 				  info->irq_flags, info->name, idev);
 		if (ret)
 			goto err_request_irq;
@@ -854,9 +859,6 @@
 	device_destroy(&uio_class, MKDEV(uio_major, idev->minor));
 err_device_create:
 	uio_free_minor(idev);
-err_get_minor:
-	kfree(idev);
-err_kzalloc:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(__uio_register_device);
@@ -877,13 +879,9 @@
 
 	uio_free_minor(idev);
 
-	if (info->irq && (info->irq != UIO_IRQ_CUSTOM))
-		free_irq(info->irq, idev);
-
 	uio_dev_del_attributes(idev);
 
 	device_destroy(&uio_class, MKDEV(uio_major, idev->minor));
-	kfree(idev);
 
 	return;
 }
diff --git a/drivers/uio/uio_aec.c b/drivers/uio/uio_aec.c
index f3611c2..1549fab 100644
--- a/drivers/uio/uio_aec.c
+++ b/drivers/uio/uio_aec.c
@@ -147,7 +147,6 @@
 	uio_unregister_device(info);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
 	iounmap(info->priv);
 
 	kfree(info);
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index 22cdf38..30f533c 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -106,7 +106,6 @@
 	uio_unregister_device(info);
 	pci_release_regions(dev);
 	pci_disable_device(dev);
-	pci_set_drvdata(dev, NULL);
 	iounmap(info->mem[0].internal_addr);
 
 	kfree (info);
diff --git a/drivers/uio/uio_mf624.c b/drivers/uio/uio_mf624.c
index a1768b2..f764adb 100644
--- a/drivers/uio/uio_mf624.c
+++ b/drivers/uio/uio_mf624.c
@@ -42,7 +42,7 @@
 
 enum mf624_interrupt_source {ADC, CTR4, ALL};
 
-void mf624_disable_interrupt(enum mf624_interrupt_source source,
+static void mf624_disable_interrupt(enum mf624_interrupt_source source,
 			     struct uio_info *info)
 {
 	void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR;
@@ -70,7 +70,7 @@
 	}
 }
 
-void mf624_enable_interrupt(enum mf624_interrupt_source source,
+static void mf624_enable_interrupt(enum mf624_interrupt_source source,
 			    struct uio_info *info)
 {
 	void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR;
@@ -220,7 +220,6 @@
 	uio_unregister_device(info);
 	pci_release_regions(dev);
 	pci_disable_device(dev);
-	pci_set_drvdata(dev, NULL);
 
 	iounmap(info->mem[0].internal_addr);
 	iounmap(info->mem[1].internal_addr);
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index 28a766b..4c345db 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -127,7 +127,6 @@
 	uio_unregister_device(info);
 	pci_release_regions(dev);
 	pci_disable_device(dev);
-	pci_set_drvdata(dev, NULL);
 	iounmap(info->mem[0].internal_addr);
 
 	kfree(info);
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 90ff17a..7666931 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -112,11 +112,11 @@
 
 	if (pdev->dev.of_node) {
 		/* alloc uioinfo for one device */
-		uioinfo = kzalloc(sizeof(*uioinfo), GFP_KERNEL);
+		uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo),
+				       GFP_KERNEL);
 		if (!uioinfo) {
-			ret = -ENOMEM;
 			dev_err(&pdev->dev, "unable to kmalloc\n");
-			return ret;
+			return -ENOMEM;
 		}
 		uioinfo->name = pdev->dev.of_node->name;
 		uioinfo->version = "devicetree";
@@ -125,20 +125,19 @@
 
 	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
 		dev_err(&pdev->dev, "missing platform_data\n");
-		goto bad0;
+		return ret;
 	}
 
 	if (uioinfo->handler || uioinfo->irqcontrol ||
 	    uioinfo->irq_flags & IRQF_SHARED) {
 		dev_err(&pdev->dev, "interrupt configuration error\n");
-		goto bad0;
+		return ret;
 	}
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
-		ret = -ENOMEM;
 		dev_err(&pdev->dev, "unable to kmalloc\n");
-		goto bad0;
+		return -ENOMEM;
 	}
 
 	priv->uioinfo = uioinfo;
@@ -153,7 +152,7 @@
 			uioinfo->irq = UIO_IRQ_NONE;
 		else if (ret < 0) {
 			dev_err(&pdev->dev, "failed to get IRQ\n");
-			goto bad1;
+			return ret;
 		}
 	}
 
@@ -209,20 +208,12 @@
 	ret = uio_register_device(&pdev->dev, priv->uioinfo);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register uio device\n");
-		goto bad2;
+		pm_runtime_disable(&pdev->dev);
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, priv);
 	return 0;
- bad2:
-	pm_runtime_disable(&pdev->dev);
- bad1:
-	kfree(priv);
- bad0:
-	/* kfree uioinfo for OF */
-	if (pdev->dev.of_node)
-		kfree(uioinfo);
-	return ret;
 }
 
 static int uio_pdrv_genirq_remove(struct platform_device *pdev)
@@ -235,11 +226,6 @@
 	priv->uioinfo->handler = NULL;
 	priv->uioinfo->irqcontrol = NULL;
 
-	/* kfree uioinfo for OF */
-	if (pdev->dev.of_node)
-		kfree(priv->uioinfo);
-
-	kfree(priv);
 	return 0;
 }
 
diff --git a/drivers/uio/uio_sercos3.c b/drivers/uio/uio_sercos3.c
index 5419832..9cfdfca 100644
--- a/drivers/uio/uio_sercos3.c
+++ b/drivers/uio/uio_sercos3.c
@@ -188,7 +188,6 @@
 	uio_unregister_device(info);
 	pci_release_regions(dev);
 	pci_disable_device(dev);
-	pci_set_drvdata(dev, NULL);
 	for (i = 0; i < 5; i++) {
 		if (info->mem[i].internal_addr)
 			iounmap(info->mem[i].internal_addr);
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index 5651231..f3eecd9 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -34,6 +34,7 @@
 #include <linux/stringify.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
+#include <linux/ratelimit.h>
 
 /*
 #define VERBOSE_DEBUG
@@ -59,13 +60,12 @@
 	atm_printk(KERN_INFO, instance , format , ## arg)
 #define atm_warn(instance, format, arg...)	\
 	atm_printk(KERN_WARNING, instance , format , ## arg)
-#define atm_dbg(instance, format, arg...)		\
-	dynamic_pr_debug("ATM dev %d: " format ,	\
-	(instance)->atm_dev->number , ## arg)
-#define atm_rldbg(instance, format, arg...)		\
-	if (printk_ratelimit())				\
-		atm_dbg(instance , format , ## arg)
-
+#define atm_dbg(instance, format, ...)					\
+	pr_debug("ATM dev %d: " format,					\
+		 (instance)->atm_dev->number, ##__VA_ARGS__)
+#define atm_rldbg(instance, format, ...)				\
+	pr_debug_ratelimited("ATM dev %d: " format,			\
+			     (instance)->atm_dev->number, ##__VA_ARGS__)
 
 /* flags, set by mini-driver in bind() */
 
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 464584c..a857131 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -48,6 +48,7 @@
 #define PORTSC_SUSP           BIT(7)
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PTC            (0x0FUL << 16)
+#define PORTSC_PHCD(d)	      ((d) ? BIT(22) : BIT(23))
 /* PTS and PTW for non lpm version only */
 #define PORTSC_PTS(d)						\
 	(u32)((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index be822a2..023d3cb 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -108,14 +108,8 @@
 	}
 
 	data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
-	if (!IS_ERR(data->phy)) {
-		ret = usb_phy_init(data->phy);
-		if (ret) {
-			dev_err(&pdev->dev, "unable to init phy: %d\n", ret);
-			goto err_clk;
-		}
-	} else if (PTR_ERR(data->phy) == -EPROBE_DEFER) {
-		ret = -EPROBE_DEFER;
+	if (IS_ERR(data->phy)) {
+		ret = PTR_ERR(data->phy);
 		goto err_clk;
 	}
 
@@ -131,7 +125,7 @@
 		if (ret) {
 			dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n",
 					ret);
-			goto err_phy;
+			goto err_clk;
 		}
 	}
 
@@ -143,7 +137,7 @@
 		dev_err(&pdev->dev,
 			"Can't register ci_hdrc platform device, err=%d\n",
 			ret);
-		goto err_phy;
+		goto err_clk;
 	}
 
 	if (data->usbmisc_data) {
@@ -164,9 +158,6 @@
 
 disable_device:
 	ci_hdrc_remove_device(data->ci_pdev);
-err_phy:
-	if (data->phy)
-		usb_phy_shutdown(data->phy);
 err_clk:
 	clk_disable_unprepare(data->clk);
 	return ret;
@@ -178,10 +169,6 @@
 
 	pm_runtime_disable(&pdev->dev);
 	ci_hdrc_remove_device(data->ci_pdev);
-
-	if (data->phy)
-		usb_phy_shutdown(data->phy);
-
 	clk_disable_unprepare(data->clk);
 
 	return 0;
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 23763dc..5d8981c 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -172,6 +172,27 @@
 	return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
 }
 
+/* The PHY enters/leaves low power mode */
+static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
+{
+	enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
+	bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
+
+	if (enable && !lpm) {
+		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
+				PORTSC_PHCD(ci->hw_bank.lpm));
+	} else  if (!enable && lpm) {
+		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
+				0);
+		/* 
+		 * The controller needs at least 1ms to reflect
+		 * PHY's status, the PHY also needs some time (less
+		 * than 1ms) to leave low power mode.
+		 */
+		usleep_range(1500, 2000);
+	}
+}
+
 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 {
 	u32 reg;
@@ -199,6 +220,8 @@
 	if (ci->hw_ep_max > ENDPT_MAX)
 		return -ENODEV;
 
+	ci_hdrc_enter_lpm(ci, false);
+
 	/* Disable all interrupts bits */
 	hw_write(ci, OP_USBINTR, 0xffffffff, 0);
 
@@ -369,16 +392,28 @@
 static int ci_get_platdata(struct device *dev,
 		struct ci_hdrc_platform_data *platdata)
 {
-	/* Get the vbus regulator */
-	platdata->reg_vbus = devm_regulator_get(dev, "vbus");
-	if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
-	} else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
-		platdata->reg_vbus = NULL; /* no vbus regualator is needed */
-	} else if (IS_ERR(platdata->reg_vbus)) {
-		dev_err(dev, "Getting regulator error: %ld\n",
-			PTR_ERR(platdata->reg_vbus));
-		return PTR_ERR(platdata->reg_vbus);
+	if (!platdata->phy_mode)
+		platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
+
+	if (!platdata->dr_mode)
+		platdata->dr_mode = of_usb_get_dr_mode(dev->of_node);
+
+	if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
+		platdata->dr_mode = USB_DR_MODE_OTG;
+
+	if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		/* Get the vbus regulator */
+		platdata->reg_vbus = devm_regulator_get(dev, "vbus");
+		if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
+			return -EPROBE_DEFER;
+		} else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
+			/* no vbus regualator is needed */
+			platdata->reg_vbus = NULL;
+		} else if (IS_ERR(platdata->reg_vbus)) {
+			dev_err(dev, "Getting regulator error: %ld\n",
+				PTR_ERR(platdata->reg_vbus));
+			return PTR_ERR(platdata->reg_vbus);
+		}
 	}
 
 	return 0;
@@ -465,6 +500,33 @@
 	}
 }
 
+static int ci_usb_phy_init(struct ci_hdrc *ci)
+{
+	if (ci->platdata->phy) {
+		ci->transceiver = ci->platdata->phy;
+		return usb_phy_init(ci->transceiver);
+	} else {
+		ci->global_phy = true;
+		ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+		if (IS_ERR(ci->transceiver))
+			ci->transceiver = NULL;
+
+		return 0;
+	}
+}
+
+static void ci_usb_phy_destroy(struct ci_hdrc *ci)
+{
+	if (!ci->transceiver)
+		return;
+
+	otg_set_peripheral(ci->transceiver->otg, NULL);
+	if (ci->global_phy)
+		usb_put_phy(ci->transceiver);
+	else
+		usb_phy_shutdown(ci->transceiver);
+}
+
 static int ci_hdrc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
@@ -473,7 +535,6 @@
 	void __iomem	*base;
 	int		ret;
 	enum usb_dr_mode dr_mode;
-	struct device_node *of_node = dev->of_node ?: dev->parent->of_node;
 
 	if (!dev->platform_data) {
 		dev_err(dev, "platform data missing\n");
@@ -493,10 +554,6 @@
 
 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
-	if (ci->platdata->phy)
-		ci->transceiver = ci->platdata->phy;
-	else
-		ci->global_phy = true;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
@@ -504,27 +561,25 @@
 		return -ENODEV;
 	}
 
+	ret = ci_usb_phy_init(ci);
+	if (ret) {
+		dev_err(dev, "unable to init phy: %d\n", ret);
+		return ret;
+	}
+
 	ci->hw_bank.phys = res->start;
 
 	ci->irq = platform_get_irq(pdev, 0);
 	if (ci->irq < 0) {
 		dev_err(dev, "missing IRQ\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto destroy_phy;
 	}
 
 	ci_get_otg_capable(ci);
 
-	if (!ci->platdata->phy_mode)
-		ci->platdata->phy_mode = of_usb_get_phy_mode(of_node);
-
 	hw_phymode_configure(ci);
 
-	if (!ci->platdata->dr_mode)
-		ci->platdata->dr_mode = of_usb_get_dr_mode(of_node);
-
-	if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN)
-		ci->platdata->dr_mode = USB_DR_MODE_OTG;
-
 	dr_mode = ci->platdata->dr_mode;
 	/* initialize role(s) before the interrupt is requested */
 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
@@ -537,11 +592,23 @@
 		ret = ci_hdrc_gadget_init(ci);
 		if (ret)
 			dev_info(dev, "doesn't support gadget\n");
+		if (!ret && ci->transceiver) {
+			ret = otg_set_peripheral(ci->transceiver->otg,
+							&ci->gadget);
+			/*
+			 * If we implement all USB functions using chipidea drivers,
+			 * it doesn't need to call above API, meanwhile, if we only
+			 * use gadget function, calling above API is useless.
+			 */
+			if (ret && ret != -ENOTSUPP)
+				goto destroy_phy;
+		}
 	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto destroy_phy;
 	}
 
 	if (ci->is_otg) {
@@ -594,6 +661,8 @@
 	free_irq(ci->irq, ci);
 stop:
 	ci_role_destroy(ci);
+destroy_phy:
+	ci_usb_phy_destroy(ci);
 
 	return ret;
 }
@@ -605,6 +674,8 @@
 	dbg_remove_files(ci);
 	free_irq(ci->irq, ci);
 	ci_role_destroy(ci);
+	ci_hdrc_enter_lpm(ci, true);
+	ci_usb_phy_destroy(ci);
 	kfree(ci->hw_bank.regmap);
 
 	return 0;
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 64d7a6d..59e6020 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -103,15 +103,15 @@
 	if (hcd) {
 		usb_remove_hcd(hcd);
 		usb_put_hcd(hcd);
+		if (ci->platdata->reg_vbus)
+			regulator_disable(ci->platdata->reg_vbus);
 	}
-	if (ci->platdata->reg_vbus)
-		regulator_disable(ci->platdata->reg_vbus);
 }
 
 
 void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 {
-	if (ci->role == CI_ROLE_HOST)
+	if (ci->role == CI_ROLE_HOST && ci->hcd)
 		host_stop(ci);
 }
 
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 9333083..b34c819 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -20,7 +20,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
 #include <linux/usb/chipidea.h>
 
 #include "ci.h"
@@ -686,9 +685,6 @@
 	usb_ep_fifo_flush(&ci->ep0out->ep);
 	usb_ep_fifo_flush(&ci->ep0in->ep);
 
-	if (ci->driver)
-		ci->driver->disconnect(gadget);
-
 	/* make sure to disable all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_disable(ep);
@@ -718,6 +714,11 @@
 	int retval;
 
 	spin_unlock(&ci->lock);
+	if (ci->gadget.speed != USB_SPEED_UNKNOWN) {
+		if (ci->driver)
+			ci->driver->disconnect(&ci->gadget);
+	}
+
 	retval = _gadget_stop_activity(&ci->gadget);
 	if (retval)
 		goto done;
@@ -1461,6 +1462,8 @@
 			hw_device_state(ci, ci->ep0out->qh.dma);
 			dev_dbg(ci->dev, "Connected to host\n");
 		} else {
+			if (ci->driver)
+				ci->driver->disconnect(&ci->gadget);
 			hw_device_state(ci, 0);
 			if (ci->platdata->notify_event)
 				ci->platdata->notify_event(ci,
@@ -1633,23 +1636,22 @@
 	retval = usb_ep_enable(&ci->ep0in->ep);
 	if (retval)
 		return retval;
-	spin_lock_irqsave(&ci->lock, flags);
 
 	ci->driver = driver;
 	pm_runtime_get_sync(&ci->gadget.dev);
 	if (ci->vbus_active) {
+		spin_lock_irqsave(&ci->lock, flags);
 		hw_device_reset(ci, USBMODE_CM_DC);
 	} else {
 		pm_runtime_put_sync(&ci->gadget.dev);
-		goto done;
+		return retval;
 	}
 
 	retval = hw_device_state(ci, ci->ep0out->qh.dma);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	if (retval)
 		pm_runtime_put_sync(&ci->gadget.dev);
 
- done:
-	spin_unlock_irqrestore(&ci->lock, flags);
 	return retval;
 }
 
@@ -1786,34 +1788,9 @@
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	if (ci->global_phy) {
-		ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (IS_ERR(ci->transceiver))
-			ci->transceiver = NULL;
-	}
-
-	if (ci->platdata->flags & CI_HDRC_REQUIRE_TRANSCEIVER) {
-		if (ci->transceiver == NULL) {
-			retval = -ENODEV;
-			goto destroy_eps;
-		}
-	}
-
-	if (ci->transceiver) {
-		retval = otg_set_peripheral(ci->transceiver->otg,
-						&ci->gadget);
-		/*
-		 * If we implement all USB functions using chipidea drivers,
-		 * it doesn't need to call above API, meanwhile, if we only
-		 * use gadget function, calling above API is useless.
-		 */
-		if (retval && retval != -ENOTSUPP)
-			goto put_transceiver;
-	}
-
 	retval = usb_add_gadget_udc(dev, &ci->gadget);
 	if (retval)
-		goto remove_trans;
+		goto destroy_eps;
 
 	pm_runtime_no_callbacks(&ci->gadget.dev);
 	pm_runtime_enable(&ci->gadget.dev);
@@ -1823,17 +1800,6 @@
 
 	return retval;
 
-remove_trans:
-	if (ci->transceiver) {
-		otg_set_peripheral(ci->transceiver->otg, NULL);
-		if (ci->global_phy)
-			usb_put_phy(ci->transceiver);
-	}
-
-	dev_err(dev, "error = %i\n", retval);
-put_transceiver:
-	if (ci->transceiver && ci->global_phy)
-		usb_put_phy(ci->transceiver);
 destroy_eps:
 	destroy_eps(ci);
 free_pools:
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index d3318a0..4d38759 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -101,6 +101,7 @@
 	struct work_struct	rxwork;
 	int			werr;
 	int			rerr;
+	int                     resp_count;
 
 	struct list_head	device_list;
 	int			(*manage_power)(struct usb_interface *, int);
@@ -253,6 +254,10 @@
 			"NOTIFY_NETWORK_CONNECTION %s network",
 			dr->wValue ? "connected to" : "disconnected from");
 		goto exit;
+	case USB_CDC_NOTIFY_SPEED_CHANGE:
+		dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)",
+			urb->actual_length);
+		goto exit;
 	default:
 		clear_bit(WDM_POLL_RUNNING, &desc->flags);
 		dev_err(&desc->intf->dev,
@@ -262,9 +267,9 @@
 	}
 
 	spin_lock(&desc->iuspin);
-	clear_bit(WDM_READ, &desc->flags);
 	responding = test_and_set_bit(WDM_RESPONDING, &desc->flags);
-	if (!responding && !test_bit(WDM_DISCONNECTING, &desc->flags)
+	if (!desc->resp_count++ && !responding
+		&& !test_bit(WDM_DISCONNECTING, &desc->flags)
 		&& !test_bit(WDM_SUSPENDING, &desc->flags)) {
 		rv = usb_submit_urb(desc->response, GFP_ATOMIC);
 		dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d",
@@ -521,10 +526,36 @@
 
 	desc->length -= cntr;
 	/* in case we had outstanding data */
-	if (!desc->length)
+	if (!desc->length) {
 		clear_bit(WDM_READ, &desc->flags);
 
-	spin_unlock_irq(&desc->iuspin);
+		if (--desc->resp_count) {
+			set_bit(WDM_RESPONDING, &desc->flags);
+			spin_unlock_irq(&desc->iuspin);
+
+			rv = usb_submit_urb(desc->response, GFP_KERNEL);
+			if (rv) {
+				dev_err(&desc->intf->dev,
+					"%s: usb_submit_urb failed with result %d\n",
+					__func__, rv);
+				spin_lock_irq(&desc->iuspin);
+				clear_bit(WDM_RESPONDING, &desc->flags);
+				spin_unlock_irq(&desc->iuspin);
+
+				if (rv == -ENOMEM) {
+					rv = schedule_work(&desc->rxwork);
+					if (rv)
+						dev_err(&desc->intf->dev, "Cannot schedule work\n");
+				} else {
+					spin_lock_irq(&desc->iuspin);
+					desc->resp_count = 0;
+					spin_unlock_irq(&desc->iuspin);
+				}
+			}
+		} else
+			spin_unlock_irq(&desc->iuspin);
+	} else
+		spin_unlock_irq(&desc->iuspin);
 
 	rv = cntr;
 
@@ -635,6 +666,9 @@
 		if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
 			dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
 			kill_urbs(desc);
+			spin_lock_irq(&desc->iuspin);
+			desc->resp_count = 0;
+			spin_unlock_irq(&desc->iuspin);
 			desc->manage_power(desc->intf, 0);
 		} else {
 			/* must avoid dev_printk here as desc->intf is invalid */
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 71dc5d7..967152a 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -914,10 +914,8 @@
 	snoop(&dev->dev, "control urb: bRequestType=%02x "
 		"bRequest=%02x wValue=%04x "
 		"wIndex=%04x wLength=%04x\n",
-		ctrl.bRequestType, ctrl.bRequest,
-		__le16_to_cpup(&ctrl.wValue),
-		__le16_to_cpup(&ctrl.wIndex),
-		__le16_to_cpup(&ctrl.wLength));
+		ctrl.bRequestType, ctrl.bRequest, ctrl.wValue,
+		ctrl.wIndex, ctrl.wLength);
 	if (ctrl.bRequestType & 0x80) {
 		if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data,
 					       ctrl.wLength)) {
@@ -1636,32 +1634,32 @@
 static int proc_control_compat(struct dev_state *ps,
 				struct usbdevfs_ctrltransfer32 __user *p32)
 {
-        struct usbdevfs_ctrltransfer __user *p;
-        __u32 udata;
-        p = compat_alloc_user_space(sizeof(*p));
-        if (copy_in_user(p, p32, (sizeof(*p32) - sizeof(compat_caddr_t))) ||
-            get_user(udata, &p32->data) ||
+	struct usbdevfs_ctrltransfer __user *p;
+	__u32 udata;
+	p = compat_alloc_user_space(sizeof(*p));
+	if (copy_in_user(p, p32, (sizeof(*p32) - sizeof(compat_caddr_t))) ||
+	    get_user(udata, &p32->data) ||
 	    put_user(compat_ptr(udata), &p->data))
 		return -EFAULT;
-        return proc_control(ps, p);
+	return proc_control(ps, p);
 }
 
 static int proc_bulk_compat(struct dev_state *ps,
 			struct usbdevfs_bulktransfer32 __user *p32)
 {
-        struct usbdevfs_bulktransfer __user *p;
-        compat_uint_t n;
-        compat_caddr_t addr;
+	struct usbdevfs_bulktransfer __user *p;
+	compat_uint_t n;
+	compat_caddr_t addr;
 
-        p = compat_alloc_user_space(sizeof(*p));
+	p = compat_alloc_user_space(sizeof(*p));
 
-        if (get_user(n, &p32->ep) || put_user(n, &p->ep) ||
-            get_user(n, &p32->len) || put_user(n, &p->len) ||
-            get_user(n, &p32->timeout) || put_user(n, &p->timeout) ||
-            get_user(addr, &p32->data) || put_user(compat_ptr(addr), &p->data))
-                return -EFAULT;
+	if (get_user(n, &p32->ep) || put_user(n, &p->ep) ||
+	    get_user(n, &p32->len) || put_user(n, &p->len) ||
+	    get_user(n, &p32->timeout) || put_user(n, &p->timeout) ||
+	    get_user(addr, &p32->data) || put_user(compat_ptr(addr), &p->data))
+		return -EFAULT;
 
-        return proc_bulk(ps, p);
+	return proc_bulk(ps, p);
 }
 static int proc_disconnectsignal_compat(struct dev_state *ps, void __user *arg)
 {
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f7841d4..47aade2 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1179,8 +1179,8 @@
 						"reset_resume", status);
 		} else {
 			intf->needs_binding = 1;
-			dev_warn(&intf->dev, "no %s for driver %s?\n",
-					"reset_resume", driver->name);
+			dev_dbg(&intf->dev, "no reset_resume for driver %s?\n",
+					driver->name);
 		}
 	} else {
 		status = driver->resume(intf);
@@ -1790,6 +1790,9 @@
 	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
 	int ret = -EPERM;
 
+	if (enable && !udev->usb2_hw_lpm_allowed)
+		return 0;
+
 	if (hcd->driver->set_usb2_hw_lpm) {
 		ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
 		if (!ret)
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 7421888..3bdfbf8 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -8,7 +8,7 @@
  * (C) Copyright Deti Fliegl 1999 (new USB architecture)
  * (C) Copyright Randy Dunlap 2000
  * (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id,
- 	more docs, etc)
+ *	more docs, etc)
  * (C) Copyright Yggdrasil Computing, Inc. 2000
  *     (usb_device_id matching changes by Adam J. Richter)
  * (C) Copyright Greg Kroah-Hartman 2002-2003
@@ -27,7 +27,7 @@
 static const struct file_operations *usb_minors[MAX_USB_MINORS];
 static DECLARE_RWSEM(minor_rwsem);
 
-static int usb_open(struct inode * inode, struct file * file)
+static int usb_open(struct inode *inode, struct file *file)
 {
 	int minor = iminor(inode);
 	const struct file_operations *c;
@@ -44,7 +44,7 @@
 	file->f_op = new_fops;
 	/* Curiouser and curiouser... NULL ->open() as "no device" ? */
 	if (file->f_op->open)
-		err = file->f_op->open(inode,file);
+		err = file->f_op->open(inode, file);
 	if (err) {
 		fops_put(file->f_op);
 		file->f_op = fops_get(old_fops);
@@ -166,7 +166,7 @@
 	char *temp;
 
 #ifdef CONFIG_USB_DYNAMIC_MINORS
-	/* 
+	/*
 	 * We don't care what the device tries to start at, we want to start
 	 * at zero to pack the devices into the smallest available space with
 	 * no holes in the minor range.
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index b9d3c43..dfe9d0f 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -215,6 +215,9 @@
 		goto disable_pci;
 	}
 
+	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+
 	if (driver->flags & HCD_MEMORY) {
 		/* EHCI, OHCI */
 		hcd->rsrc_start = pci_resource_start(dev, 0);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index d6a8d23..6bffb8c 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -6,7 +6,7 @@
  * (C) Copyright Deti Fliegl 1999
  * (C) Copyright Randy Dunlap 2000
  * (C) Copyright David Brownell 2000-2002
- * 
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -40,6 +40,7 @@
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
 #include <linux/pm_runtime.h>
+#include <linux/types.h>
 
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -92,10 +93,7 @@
 
 /* used when allocating bus numbers */
 #define USB_MAXBUS		64
-struct usb_busmap {
-	unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))];
-};
-static struct usb_busmap busmap;
+static DECLARE_BITMAP(busmap, USB_MAXBUS);
 
 /* used when updating list of hcds */
 DEFINE_MUTEX(usb_bus_list_lock);	/* exported only for usbfs */
@@ -171,7 +169,7 @@
 };
 
 /* usb 2.0 root hub device descriptor */
-static const u8 usb2_rh_dev_descriptor [18] = {
+static const u8 usb2_rh_dev_descriptor[18] = {
 	0x12,       /*  __u8  bLength; */
 	0x01,       /*  __u8  bDescriptorType; Device */
 	0x00, 0x02, /*  __le16 bcdUSB; v2.0 */
@@ -194,7 +192,7 @@
 /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
 
 /* usb 1.1 root hub device descriptor */
-static const u8 usb11_rh_dev_descriptor [18] = {
+static const u8 usb11_rh_dev_descriptor[18] = {
 	0x12,       /*  __u8  bLength; */
 	0x01,       /*  __u8  bDescriptorType; Device */
 	0x10, 0x01, /*  __le16 bcdUSB; v1.1 */
@@ -219,7 +217,7 @@
 
 /* Configuration descriptors for our root hubs */
 
-static const u8 fs_rh_config_descriptor [] = {
+static const u8 fs_rh_config_descriptor[] = {
 
 	/* one configuration */
 	0x09,       /*  __u8  bLength; */
@@ -228,13 +226,13 @@
 	0x01,       /*  __u8  bNumInterfaces; (1) */
 	0x01,       /*  __u8  bConfigurationValue; */
 	0x00,       /*  __u8  iConfiguration; */
-	0xc0,       /*  __u8  bmAttributes; 
+	0xc0,       /*  __u8  bmAttributes;
 				 Bit 7: must be set,
 				     6: Self-powered,
 				     5: Remote wakeup,
 				     4..0: resvd */
 	0x00,       /*  __u8  MaxPower; */
-      
+
 	/* USB 1.1:
 	 * USB 2.0, single TT organization (mandatory):
 	 *	one interface, protocol 0
@@ -256,17 +254,17 @@
 	0x00,       /*  __u8  if_bInterfaceSubClass; */
 	0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
 	0x00,       /*  __u8  if_iInterface; */
-     
+
 	/* one endpoint (status change endpoint) */
 	0x07,       /*  __u8  ep_bLength; */
 	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
 	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
- 	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
- 	0x02, 0x00, /*  __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+	0x02, 0x00, /*  __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
 	0xff        /*  __u8  ep_bInterval; (255ms -- usb 2.0 spec) */
 };
 
-static const u8 hs_rh_config_descriptor [] = {
+static const u8 hs_rh_config_descriptor[] = {
 
 	/* one configuration */
 	0x09,       /*  __u8  bLength; */
@@ -275,13 +273,13 @@
 	0x01,       /*  __u8  bNumInterfaces; (1) */
 	0x01,       /*  __u8  bConfigurationValue; */
 	0x00,       /*  __u8  iConfiguration; */
-	0xc0,       /*  __u8  bmAttributes; 
+	0xc0,       /*  __u8  bmAttributes;
 				 Bit 7: must be set,
 				     6: Self-powered,
 				     5: Remote wakeup,
 				     4..0: resvd */
 	0x00,       /*  __u8  MaxPower; */
-      
+
 	/* USB 1.1:
 	 * USB 2.0, single TT organization (mandatory):
 	 *	one interface, protocol 0
@@ -303,12 +301,12 @@
 	0x00,       /*  __u8  if_bInterfaceSubClass; */
 	0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
 	0x00,       /*  __u8  if_iInterface; */
-     
+
 	/* one endpoint (status change endpoint) */
 	0x07,       /*  __u8  ep_bLength; */
 	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
 	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
- 	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
 		     * see hub.c:hub_configure() for details. */
 	(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
@@ -428,7 +426,7 @@
 	char const *s;
 	static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
 
-	// language ids
+	/* language ids */
 	switch (id) {
 	case 0:
 		/* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
@@ -464,7 +462,7 @@
 static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 {
 	struct usb_ctrlrequest *cmd;
- 	u16		typeReq, wValue, wIndex, wLength;
+	u16		typeReq, wValue, wIndex, wLength;
 	u8		*ubuf = urb->transfer_buffer;
 	unsigned	len = 0;
 	int		status;
@@ -526,10 +524,10 @@
 	 */
 
 	case DeviceRequest | USB_REQ_GET_STATUS:
-		tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+		tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
 					<< USB_DEVICE_REMOTE_WAKEUP)
 				| (1 << USB_DEVICE_SELF_POWERED);
-		tbuf [1] = 0;
+		tbuf[1] = 0;
 		len = 2;
 		break;
 	case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
@@ -546,7 +544,7 @@
 			goto error;
 		break;
 	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
-		tbuf [0] = 1;
+		tbuf[0] = 1;
 		len = 1;
 			/* FALLTHROUGH */
 	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
@@ -609,13 +607,13 @@
 		}
 		break;
 	case DeviceRequest | USB_REQ_GET_INTERFACE:
-		tbuf [0] = 0;
+		tbuf[0] = 0;
 		len = 1;
 			/* FALLTHROUGH */
 	case DeviceOutRequest | USB_REQ_SET_INTERFACE:
 		break;
 	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
-		// wValue == urb->dev->devaddr
+		/* wValue == urb->dev->devaddr */
 		dev_dbg (hcd->self.controller, "root hub device address %d\n",
 			wValue);
 		break;
@@ -625,9 +623,9 @@
 	/* ENDPOINT REQUESTS */
 
 	case EndpointRequest | USB_REQ_GET_STATUS:
-		// ENDPOINT_HALT flag
-		tbuf [0] = 0;
-		tbuf [1] = 0;
+		/* ENDPOINT_HALT flag */
+		tbuf[0] = 0;
+		tbuf[1] = 0;
 		len = 2;
 			/* FALLTHROUGH */
 	case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
@@ -683,7 +681,7 @@
 		if (urb->transfer_buffer_length < len)
 			len = urb->transfer_buffer_length;
 		urb->actual_length = len;
-		// always USB_DIR_IN, toward host
+		/* always USB_DIR_IN, toward host */
 		memcpy (ubuf, bufp, len);
 
 		/* report whether RH hardware supports remote wakeup */
@@ -877,11 +875,11 @@
 	usb_hcd = bus_to_hcd(usb_bus);
 	result = sscanf(buf, "%u\n", &val);
 	if (result == 1) {
-		usb_hcd->authorized_default = val? 1 : 0;
+		usb_hcd->authorized_default = val ? 1 : 0;
 		result = size;
-	}
-	else
+	} else {
 		result = -EINVAL;
+	}
 	return result;
 }
 static DEVICE_ATTR_RW(authorized_default);
@@ -941,12 +939,12 @@
 	int busnum;
 
 	mutex_lock(&usb_bus_list_lock);
-	busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
+	busnum = find_next_zero_bit(busmap, USB_MAXBUS, 1);
 	if (busnum >= USB_MAXBUS) {
 		printk (KERN_ERR "%s: too many buses\n", usbcore_name);
 		goto error_find_busnum;
 	}
-	set_bit (busnum, busmap.busmap);
+	set_bit(busnum, busmap);
 	bus->busnum = busnum;
 
 	/* Add it to the local list of buses */
@@ -987,7 +985,7 @@
 
 	usb_notify_remove_bus(bus);
 
-	clear_bit (bus->busnum, busmap.busmap);
+	clear_bit(bus->busnum, busmap);
 }
 
 /**
@@ -1033,6 +1031,7 @@
 					dev_name(&usb_dev->dev), retval);
 			return retval;
 		}
+		usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
 	}
 
 	retval = usb_new_device (usb_dev);
@@ -1120,21 +1119,21 @@
 	case USB_SPEED_LOW: 	/* INTR only */
 		if (is_input) {
 			tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
-			return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
+			return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
 		} else {
 			tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
-			return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
+			return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
 		}
 	case USB_SPEED_FULL:	/* ISOC or INTR */
 		if (isoc) {
 			tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
-			return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp);
+			return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
 		} else {
 			tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
-			return (9107L + BW_HOST_DELAY + tmp);
+			return 9107L + BW_HOST_DELAY + tmp;
 		}
 	case USB_SPEED_HIGH:	/* ISOC or INTR */
-		// FIXME adjust for input vs output
+		/* FIXME adjust for input vs output */
 		if (isoc)
 			tmp = HS_NSECS_ISO (bytecount);
 		else
@@ -1651,6 +1650,7 @@
 static void __usb_hcd_giveback_urb(struct urb *urb)
 {
 	struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
+	struct usb_anchor *anchor = urb->anchor;
 	int status = urb->unlinked;
 	unsigned long flags;
 
@@ -1662,6 +1662,7 @@
 
 	unmap_urb_for_dma(hcd, urb);
 	usbmon_urb_complete(&hcd->self, urb, status);
+	usb_anchor_suspend_wakeups(anchor);
 	usb_unanchor_urb(urb);
 
 	/* pass ownership to the completion handler */
@@ -1681,6 +1682,7 @@
 	urb->complete(urb);
 	local_irq_restore(flags);
 
+	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);
 	if (unlikely(atomic_read(&urb->reject)))
 		wake_up(&usb_kill_urb_queue);
@@ -1703,7 +1705,9 @@
 
 		urb = list_entry(local_list.next, struct urb, urb_list);
 		list_del_init(&urb->urb_list);
+		bh->completing_ep = urb->ep;
 		__usb_hcd_giveback_urb(urb);
+		bh->completing_ep = NULL;
 	}
 
 	/* check if there are new URBs to giveback */
@@ -1812,7 +1816,7 @@
 				 case USB_ENDPOINT_XFER_INT:
 					s = "-intr"; break;
 				 default:
-			 		s = "-iso"; break;
+					s = "-iso"; break;
 				};
 				s;
 			}));
@@ -2073,8 +2077,11 @@
  *
  * Reverts a group of bulk endpoints back to not using stream IDs.
  * Can fail if we are given bad arguments, or HCD is broken.
+ *
+ * Return: On success, the number of allocated streams. On failure, a negative
+ * error code.
  */
-void usb_free_streams(struct usb_interface *interface,
+int usb_free_streams(struct usb_interface *interface,
 		struct usb_host_endpoint **eps, unsigned int num_eps,
 		gfp_t mem_flags)
 {
@@ -2085,14 +2092,14 @@
 	dev = interface_to_usbdev(interface);
 	hcd = bus_to_hcd(dev->bus);
 	if (dev->speed != USB_SPEED_SUPER)
-		return;
+		return -EINVAL;
 
 	/* Streams only apply to bulk endpoints. */
 	for (i = 0; i < num_eps; i++)
 		if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
-			return;
+			return -EINVAL;
 
-	hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
+	return hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
 }
 EXPORT_SYMBOL_GPL(usb_free_streams);
 
@@ -2245,7 +2252,7 @@
 }
 
 /**
- * usb_hcd_resume_root_hub - called by HCD to resume its root hub 
+ * usb_hcd_resume_root_hub - called by HCD to resume its root hub
  * @hcd: host controller for this root hub
  *
  * The USB host controller calls this function when its root hub is
@@ -2324,15 +2331,8 @@
 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 {
 	struct usb_hcd		*hcd = __hcd;
-	unsigned long		flags;
 	irqreturn_t		rc;
 
-	/* IRQF_DISABLED doesn't work correctly with shared IRQs
-	 * when the first handler doesn't use it.  So let's just
-	 * assume it's never used.
-	 */
-	local_irq_save(flags);
-
 	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
 		rc = IRQ_NONE;
 	else if (hcd->driver->irq(hcd) == IRQ_NONE)
@@ -2340,7 +2340,6 @@
 	else
 		rc = IRQ_HANDLED;
 
-	local_irq_restore(flags);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2547,13 +2546,6 @@
 
 	if (hcd->driver->irq) {
 
-		/* IRQF_DISABLED doesn't work as advertised when used together
-		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
-		 * interrupts we can remove it here.
-		 */
-		if (irqflags & IRQF_SHARED)
-			irqflags &= ~IRQF_DISABLED;
-
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
 		retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
@@ -2600,7 +2592,7 @@
 
 	/* Keep old behaviour if authorized_default is not in [0, 1]. */
 	if (authorized_default < 0 || authorized_default > 1)
-		hcd->authorized_default = hcd->wireless? 0 : 1;
+		hcd->authorized_default = hcd->wireless ? 0 : 1;
 	else
 		hcd->authorized_default = authorized_default;
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -2743,7 +2735,7 @@
 err_register_bus:
 	hcd_buffer_destroy(hcd);
 	return retval;
-} 
+}
 EXPORT_SYMBOL_GPL(usb_add_hcd);
 
 /**
@@ -2818,7 +2810,7 @@
 EXPORT_SYMBOL_GPL(usb_remove_hcd);
 
 void
-usb_hcd_platform_shutdown(struct platform_device* dev)
+usb_hcd_platform_shutdown(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 
@@ -2840,7 +2832,7 @@
  * Notice that the code is minimally error-proof. Because usbmon needs
  * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
  */
- 
+
 int usb_mon_register (struct usb_mon_operations *ops)
 {
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e6b682c..06cec635 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -120,7 +120,7 @@
 	if (hub_is_superspeed(hub->hdev))
 		return "5.0 Gb/s";
 	if (portstatus & USB_PORT_STAT_HIGH_SPEED)
-    		return "480 Mb/s";
+		return "480 Mb/s";
 	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
 		return "1.5 Mb/s";
 	else
@@ -135,7 +135,7 @@
 	return usb_get_intfdata(hdev->actconfig->interface[0]);
 }
 
-static int usb_device_supports_lpm(struct usb_device *udev)
+int usb_device_supports_lpm(struct usb_device *udev)
 {
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
@@ -156,6 +156,11 @@
 				"Power management will be impacted.\n");
 		return 0;
 	}
+
+	/* udev is root hub */
+	if (!udev->parent)
+		return 1;
+
 	if (udev->parent->lpm_capable)
 		return 1;
 
@@ -310,9 +315,9 @@
 		return;
 
 	udev_u1_del = udev->bos->ss_cap->bU1devExitLat;
-	udev_u2_del = udev->bos->ss_cap->bU2DevExitLat;
+	udev_u2_del = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat);
 	hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat;
-	hub_u2_del = udev->parent->bos->ss_cap->bU2DevExitLat;
+	hub_u2_del = le16_to_cpu(udev->parent->bos->ss_cap->bU2DevExitLat);
 
 	usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del,
 			hub, &udev->parent->u1_params, hub_u1_del);
@@ -433,7 +438,7 @@
 			case HUB_LED_OFF: s = "off"; break;
 			case HUB_LED_AUTO: s = "auto"; break;
 			default: s = "??"; break;
-			}; s; }),
+			} s; }),
 			status);
 }
 
@@ -857,7 +862,7 @@
 				"%s failed (err = %d)\n", __func__, ret);
 	} else {
 		*status = le16_to_cpu(hub->status->hub.wHubStatus);
-		*change = le16_to_cpu(hub->status->hub.wHubChange); 
+		*change = le16_to_cpu(hub->status->hub.wHubChange);
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -956,7 +961,7 @@
 	 */
 
 	set_bit(port1, hub->change_bits);
- 	kick_khubd(hub);
+	kick_khubd(hub);
 }
 
 /**
@@ -1107,16 +1112,13 @@
 			/*
 			 * USB3 protocol ports will automatically transition
 			 * to Enabled state when detect an USB3.0 device attach.
-			 * Do not disable USB3 protocol ports.
+			 * Do not disable USB3 protocol ports, just pretend
+			 * power was lost
 			 */
-			if (!hub_is_superspeed(hdev)) {
+			portstatus &= ~USB_PORT_STAT_ENABLE;
+			if (!hub_is_superspeed(hdev))
 				usb_clear_port_feature(hdev, port1,
 						   USB_PORT_FEAT_ENABLE);
-				portstatus &= ~USB_PORT_STAT_ENABLE;
-			} else {
-				/* Pretend that power was lost for USB3 devs */
-				portstatus &= ~USB_PORT_STAT_ENABLE;
-			}
 		}
 
 		/* Clear status-change flags; we'll debounce later */
@@ -1130,6 +1132,11 @@
 			usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_ENABLE);
 		}
+		if (portchange & USB_PORT_STAT_C_RESET) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
+		}
 		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
 				hub_is_superspeed(hub->hdev)) {
 			need_debounce_delay = true;
@@ -1361,7 +1368,7 @@
 	if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
 			!(hub_is_superspeed(hdev))) {
 		int	i;
-		char	portstr [USB_MAXCHILDREN + 1];
+		char	portstr[USB_MAXCHILDREN + 1];
 
 		for (i = 0; i < hdev->maxchild; i++)
 			portstr[i] = hub->descriptor->u.hs.DeviceRemovable
@@ -1429,32 +1436,32 @@
 
 	/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
 	switch (wHubCharacteristics & HUB_CHAR_TTTT) {
-		case HUB_TTTT_8_BITS:
-			if (hdev->descriptor.bDeviceProtocol != 0) {
-				hub->tt.think_time = 666;
-				dev_dbg(hub_dev, "TT requires at most %d "
-						"FS bit times (%d ns)\n",
-					8, hub->tt.think_time);
-			}
-			break;
-		case HUB_TTTT_16_BITS:
-			hub->tt.think_time = 666 * 2;
+	case HUB_TTTT_8_BITS:
+		if (hdev->descriptor.bDeviceProtocol != 0) {
+			hub->tt.think_time = 666;
 			dev_dbg(hub_dev, "TT requires at most %d "
 					"FS bit times (%d ns)\n",
-				16, hub->tt.think_time);
-			break;
-		case HUB_TTTT_24_BITS:
-			hub->tt.think_time = 666 * 3;
-			dev_dbg(hub_dev, "TT requires at most %d "
-					"FS bit times (%d ns)\n",
-				24, hub->tt.think_time);
-			break;
-		case HUB_TTTT_32_BITS:
-			hub->tt.think_time = 666 * 4;
-			dev_dbg(hub_dev, "TT requires at most %d "
-					"FS bit times (%d ns)\n",
-				32, hub->tt.think_time);
-			break;
+				8, hub->tt.think_time);
+		}
+		break;
+	case HUB_TTTT_16_BITS:
+		hub->tt.think_time = 666 * 2;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			16, hub->tt.think_time);
+		break;
+	case HUB_TTTT_24_BITS:
+		hub->tt.think_time = 666 * 3;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			24, hub->tt.think_time);
+		break;
+	case HUB_TTTT_32_BITS:
+		hub->tt.think_time = 666 * 4;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			32, hub->tt.think_time);
+		break;
 	}
 
 	/* probe() zeroes hub->indicator[] */
@@ -1560,7 +1567,7 @@
 
 	/* maybe cycle the hub leds */
 	if (hub->has_indicators && blinkenlights)
-		hub->indicator [0] = INDICATOR_CYCLE;
+		hub->indicator[0] = INDICATOR_CYCLE;
 
 	for (i = 0; i < hdev->maxchild; i++) {
 		ret = usb_hub_create_port_device(hub, i + 1);
@@ -1978,7 +1985,7 @@
 		if (devnum >= 128)
 			devnum = find_next_zero_bit(bus->devmap.devicemap,
 						    128, 1);
-		bus->devnum_next = ( devnum >= 127 ? 1 : devnum + 1);
+		bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
 	}
 	if (devnum < 128) {
 		set_bit(devnum, bus->devmap.devicemap);
@@ -2018,8 +2025,8 @@
  * Something got disconnected. Get rid of it and all of its children.
  *
  * If *pdev is a normal device then the parent hub must already be locked.
- * If *pdev is a root hub then this routine will acquire the
- * usb_bus_list_lock on behalf of the caller.
+ * If *pdev is a root hub then the caller must hold the usb_bus_list_lock,
+ * which protects the set of root hubs as well as the list of buses.
  *
  * Only hub drivers (including virtual root hub drivers for host
  * controllers) should ever call this.
@@ -2232,8 +2239,7 @@
 		udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
 		udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
 		udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	}
-	else {
+	} else {
 		/* read the standard strings and cache them if present */
 		udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
 		udev->manufacturer = usb_cache_string(udev,
@@ -2489,7 +2495,7 @@
 	usb_autosuspend_device(usb_dev);
 error_autoresume:
 out_authorized:
-	usb_unlock_device(usb_dev);	// complements locktree
+	usb_unlock_device(usb_dev);	/* complements locktree */
 	return result;
 }
 
@@ -3108,8 +3114,8 @@
  retry_reset_resume:
 		status = usb_reset_and_verify_device(udev);
 
- 	/* 10.5.4.5 says be sure devices in the tree are still there.
- 	 * For now let's assume the device didn't go crazy on resume,
+	/* 10.5.4.5 says be sure devices in the tree are still there.
+	 * For now let's assume the device didn't go crazy on resume,
 	 * and device drivers will know about any resume quirks.
 	 */
 	if (status == 0) {
@@ -3211,7 +3217,7 @@
 	if (status == 0 && !port_is_suspended(hub, portstatus))
 		goto SuspendCleared;
 
-	// dev_dbg(hub->intfdev, "resume port %d\n", port1);
+	/* dev_dbg(hub->intfdev, "resume port %d\n", port1); */
 
 	set_bit(port1, hub->busy_bits);
 
@@ -3855,7 +3861,7 @@
  * Between connect detection and reset signaling there must be a delay
  * of 100ms at least for debounce and power-settling.  The corresponding
  * timer shall restart whenever the downstream port detects a disconnect.
- * 
+ *
  * Apparently there are some bluetooth and irda-dongles and a number of
  * low-speed devices for which this debounce period may last over a second.
  * Not covered by the spec - but easy to deal with.
@@ -3949,6 +3955,32 @@
 	return retval;
 }
 
+/*
+ * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
+ * when they're plugged into a USB 2.0 port, but they don't work when LPM is
+ * enabled.
+ *
+ * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
+ * device says it supports the new USB 2.0 Link PM errata by setting the BESL
+ * support bit in the BOS descriptor.
+ */
+static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
+{
+	int connect_type;
+
+	if (!udev->usb2_hw_lpm_capable)
+		return;
+
+	connect_type = usb_get_hub_port_connect_type(udev->parent,
+			udev->portnum);
+
+	if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) ||
+			connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+		udev->usb2_hw_lpm_allowed = 1;
+		usb_set_usb2_hardware_lpm(udev, 1);
+	}
+}
+
 /* Reset device, (re)assign address, get device descriptor.
  * Device connection must be stable, no more debouncing needed.
  * Returns device in USB_STATE_ADDRESS, except on error.
@@ -4055,7 +4087,7 @@
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}
- 
+
 	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
 	 * Because device hardware and firmware is sometimes buggy in
 	 * this area, and this is how Linux has done it for ages.
@@ -4130,11 +4162,11 @@
 #undef GET_DESCRIPTOR_BUFSIZE
 		}
 
- 		/*
- 		 * If device is WUSB, we already assigned an
- 		 * unauthorized address in the Connect Ack sequence;
- 		 * authorization will assign the final address.
- 		 */
+		/*
+		 * If device is WUSB, we already assigned an
+		 * unauthorized address in the Connect Ack sequence;
+		 * authorization will assign the final address.
+		 */
 		if (udev->wusb == 0) {
 			for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
 				retval = hub_set_address(udev, devnum);
@@ -4163,7 +4195,7 @@
 			msleep(10);
 			if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
 				break;
-  		}
+		}
 
 		retval = usb_get_device_descriptor(udev, 8);
 		if (retval < 8) {
@@ -4219,7 +4251,7 @@
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
 		usb_ep0_reinit(udev);
 	}
-  
+
 	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
 	if (retval < (signed)sizeof(udev->descriptor)) {
 		if (retval != -ENODEV)
@@ -4242,6 +4274,7 @@
 	/* notify HCD that we have a device connected and addressed */
 	if (hcd->driver->update_device)
 		hcd->driver->update_device(hcd, udev);
+	hub_set_initial_usb2_lpm_policy(udev);
 fail:
 	if (retval) {
 		hub_port_disable(hub, port1, 0);
@@ -4316,7 +4349,7 @@
 	}
 	if (remaining < 0) {
 		dev_warn(hub->intfdev, "%dmA over power budget!\n",
-			- remaining);
+			-remaining);
 		remaining = 0;
 	}
 	return remaining;
@@ -4427,7 +4460,7 @@
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
 		if (portstatus & USB_PORT_STAT_ENABLE)
-  			goto done;
+			goto done;
 		return;
 	}
 	if (hub_is_superspeed(hub->hdev))
@@ -4450,7 +4483,7 @@
 		}
 
 		usb_set_device_state(udev, USB_STATE_POWERED);
- 		udev->bus_mA = hub->mA_per_port;
+		udev->bus_mA = hub->mA_per_port;
 		udev->level = hdev->level + 1;
 		udev->wusb = hub_is_wusb(hub);
 
@@ -4504,7 +4537,7 @@
 				goto loop_disable;
 			}
 		}
- 
+
 		/* check for devices running slower than they could */
 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
 				&& udev->speed == USB_SPEED_FULL
@@ -4564,7 +4597,7 @@
 			dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
 					port1);
 	}
- 
+
 done:
 	hub_port_disable(hub, port1, 1);
 	if (hcd->driver->relinquish_port && !hub->hdev->parent)
@@ -4729,7 +4762,7 @@
 				 * EM interference sometimes causes badly
 				 * shielded USB devices to be shutdown by
 				 * the hub, this hack enables them again.
-				 * Works at least with mouse driver. 
+				 * Works at least with mouse driver.
 				 */
 				if (!(portstatus & USB_PORT_STAT_ENABLE)
 				    && !connect_change
@@ -4841,7 +4874,7 @@
 				dev_dbg(hub_dev, "over-current change\n");
 				clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
 				msleep(500);	/* Cool down */
-                        	hub_power_on(hub, true);
+				hub_power_on(hub, true);
 				hub_hub_status(hub, &status, &unused);
 				if (status & HUB_STATUS_OVERCURRENT)
 					dev_err(hub_dev, "over-current "
@@ -4861,7 +4894,7 @@
 		usb_unlock_device(hdev);
 		kref_put(&hub->kref, hub_release);
 
-        } /* end while (1) */
+	} /* end while (1) */
 }
 
 static int hub_thread(void *__unused)
@@ -4886,7 +4919,7 @@
 
 static const struct usb_device_id hub_id_table[] = {
     { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
-	           | USB_DEVICE_ID_MATCH_INT_CLASS,
+			| USB_DEVICE_ID_MATCH_INT_CLASS,
       .idVendor = USB_VENDOR_GENESYS_LOGIC,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
@@ -5086,6 +5119,12 @@
 	}
 	parent_hub = usb_hub_to_struct_hub(parent_hdev);
 
+	/* Disable USB2 hardware LPM.
+	 * It will be re-enabled by the enumeration process.
+	 */
+	if (udev->usb2_hw_lpm_enabled == 1)
+		usb_set_usb2_hardware_lpm(udev, 0);
+
 	bos = udev->bos;
 	udev->bos = NULL;
 
@@ -5120,13 +5159,13 @@
 
 	if (ret < 0)
 		goto re_enumerate;
- 
+
 	/* Device might have changed firmware (DFU or similar) */
 	if (descriptors_changed(udev, &descriptor, bos)) {
 		dev_info(&udev->dev, "device firmware changed\n");
 		udev->descriptor = descriptor;	/* for disconnect() calls */
 		goto re_enumerate;
-  	}
+	}
 
 	/* Restore the device's previous configuration */
 	if (!udev->actconfig)
@@ -5151,7 +5190,7 @@
 			udev->actconfig->desc.bConfigurationValue, ret);
 		mutex_unlock(hcd->bandwidth_mutex);
 		goto re_enumerate;
-  	}
+	}
 	mutex_unlock(hcd->bandwidth_mutex);
 	usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
@@ -5193,12 +5232,13 @@
 
 done:
 	/* Now that the alt settings are re-installed, enable LTM and LPM. */
+	usb_set_usb2_hardware_lpm(udev, 1);
 	usb_unlocked_enable_lpm(udev);
 	usb_enable_ltm(udev);
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
 	return 0;
- 
+
 re_enumerate:
 	/* LPM state doesn't matter when we're about to destroy the device. */
 	hub_port_logical_disconnect(parent_hub, port1);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 82927e1..bb31597 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1182,8 +1182,12 @@
 			put_device(&dev->actconfig->interface[i]->dev);
 			dev->actconfig->interface[i] = NULL;
 		}
+
+		if (dev->usb2_hw_lpm_enabled == 1)
+			usb_set_usb2_hardware_lpm(dev, 0);
 		usb_unlocked_disable_lpm(dev);
 		usb_disable_ltm(dev);
+
 		dev->actconfig = NULL;
 		if (dev->state == USB_STATE_CONFIGURED)
 			usb_set_device_state(dev, USB_STATE_ADDRESS);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 01fe362..12924db 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -13,6 +13,7 @@
 
 #include <linux/usb.h>
 #include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
 #include "usb.h"
 
 /* Lists of quirky USB devices, split in device quirks and interface quirks.
@@ -161,6 +162,21 @@
 	{ }  /* terminating entry must be last */
 };
 
+static const struct usb_device_id usb_amd_resume_quirk_list[] = {
+	/* Lenovo Mouse with Pixart controller */
+	{ USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Pixart Mouse */
+	{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Optical Mouse M90/M100 */
+	{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	{ }  /* terminating entry must be last */
+};
+
 static bool usb_match_any_interface(struct usb_device *udev,
 				    const struct usb_device_id *id)
 {
@@ -187,6 +203,18 @@
 	return false;
 }
 
+static int usb_amd_resume_quirk(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	hcd = bus_to_hcd(udev->bus);
+	/* The device should be attached directly to root hub */
+	if (udev->level == 1 && hcd->amd_resume_bug == 1)
+		return 1;
+
+	return 0;
+}
+
 static u32 __usb_detect_quirks(struct usb_device *udev,
 			       const struct usb_device_id *id)
 {
@@ -212,6 +240,15 @@
 void usb_detect_quirks(struct usb_device *udev)
 {
 	udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
+
+	/*
+	 * Pixart-based mice would trigger remote wakeup issue on AMD
+	 * Yangtze chipset, so set them as RESET_RESUME flag.
+	 */
+	if (usb_amd_resume_quirk(udev))
+		udev->quirks |= __usb_detect_quirks(udev,
+				usb_amd_resume_quirk_list);
+
 	if (udev->quirks)
 		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
 			udev->quirks);
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 6d2c8ed..52a97ad 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -23,14 +23,16 @@
 {									\
 	struct usb_device *udev;					\
 	struct usb_host_config *actconfig;				\
+	ssize_t rc = 0;							\
 									\
 	udev = to_usb_device(dev);					\
+	usb_lock_device(udev);						\
 	actconfig = udev->actconfig;					\
 	if (actconfig)							\
-		return sprintf(buf, format_string,			\
+		rc = sprintf(buf, format_string,			\
 				actconfig->desc.field);			\
-	else								\
-		return 0;						\
+	usb_unlock_device(udev);					\
+	return rc;							\
 }									\
 
 #define usb_actconfig_attr(field, format_string)		\
@@ -45,12 +47,15 @@
 {
 	struct usb_device *udev;
 	struct usb_host_config *actconfig;
+	ssize_t rc = 0;
 
 	udev = to_usb_device(dev);
+	usb_lock_device(udev);
 	actconfig = udev->actconfig;
-	if (!actconfig)
-		return 0;
-	return sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig));
+	if (actconfig)
+		rc = sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig));
+	usb_unlock_device(udev);
+	return rc;
 }
 static DEVICE_ATTR_RO(bMaxPower);
 
@@ -59,12 +64,15 @@
 {
 	struct usb_device *udev;
 	struct usb_host_config *actconfig;
+	ssize_t rc = 0;
 
 	udev = to_usb_device(dev);
+	usb_lock_device(udev);
 	actconfig = udev->actconfig;
-	if ((!actconfig) || (!actconfig->string))
-		return 0;
-	return sprintf(buf, "%s\n", actconfig->string);
+	if (actconfig && actconfig->string)
+		rc = sprintf(buf, "%s\n", actconfig->string);
+	usb_unlock_device(udev);
+	return rc;
 }
 static DEVICE_ATTR_RO(configuration);
 
@@ -390,7 +398,8 @@
 static const char on_string[] = "on";
 static const char auto_string[] = "auto";
 
-static void warn_level(void) {
+static void warn_level(void)
+{
 	static int level_warned;
 
 	if (!level_warned) {
@@ -449,7 +458,7 @@
 	struct usb_device *udev = to_usb_device(dev);
 	const char *p;
 
-	if (udev->usb2_hw_lpm_enabled == 1)
+	if (udev->usb2_hw_lpm_allowed == 1)
 		p = "enabled";
 	else
 		p = "disabled";
@@ -469,8 +478,10 @@
 
 	ret = strtobool(buf, &value);
 
-	if (!ret)
+	if (!ret) {
+		udev->usb2_hw_lpm_allowed = value;
 		ret = usb_set_usb2_hardware_lpm(udev, value);
+	}
 
 	usb_unlock_device(udev);
 
@@ -644,7 +655,7 @@
 		result = usb_deauthorize_device(usb_dev);
 	else
 		result = usb_authorize_device(usb_dev);
-	return result < 0? result : size;
+	return result < 0 ? result : size;
 }
 static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR,
 				  authorized_show, authorized_store);
@@ -764,6 +775,7 @@
 	 * Following that are the raw descriptor entries for all the
 	 * configurations (config plus subsidiary descriptors).
 	 */
+	usb_lock_device(udev);
 	for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
 			nleft > 0; ++cfgno) {
 		if (cfgno < 0) {
@@ -784,6 +796,7 @@
 			off -= srclen;
 		}
 	}
+	usb_unlock_device(udev);
 	return count - nleft;
 }
 
@@ -870,9 +883,7 @@
 	char *string;
 
 	intf = to_usb_interface(dev);
-	string = intf->cur_altsetting->string;
-	barrier();		/* The altsetting might change! */
-
+	string = ACCESS_ONCE(intf->cur_altsetting->string);
 	if (!string)
 		return 0;
 	return sprintf(buf, "%s\n", string);
@@ -888,7 +899,7 @@
 
 	intf = to_usb_interface(dev);
 	udev = interface_to_usbdev(intf);
-	alt = intf->cur_altsetting;
+	alt = ACCESS_ONCE(intf->cur_altsetting);
 
 	return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
 			"ic%02Xisc%02Xip%02Xin%02X\n",
@@ -909,23 +920,14 @@
 					 struct device_attribute *attr,
 					 char *buf)
 {
-	struct usb_interface *intf;
-	struct usb_device *udev;
-	int ret;
+	int s;
 
-	intf = to_usb_interface(dev);
-	udev = interface_to_usbdev(intf);
-
-	usb_lock_device(udev);
+	device_lock(dev);
 	/* Devices will be autosuspended even when an interface isn't claimed */
-	if (!intf->dev.driver ||
-			to_usb_driver(intf->dev.driver)->supports_autosuspend)
-		ret = sprintf(buf, "%u\n", 1);
-	else
-		ret = sprintf(buf, "%u\n", 0);
-	usb_unlock_device(udev);
+	s = (!dev->driver || to_usb_driver(dev->driver)->supports_autosuspend);
+	device_unlock(dev);
 
-	return ret;
+	return sprintf(buf, "%u\n", s);
 }
 static DEVICE_ATTR_RO(supports_autosuspend);
 
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c12bc79..e622083 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -138,13 +138,19 @@
 }
 EXPORT_SYMBOL_GPL(usb_anchor_urb);
 
+static int usb_anchor_check_wakeup(struct usb_anchor *anchor)
+{
+	return atomic_read(&anchor->suspend_wakeups) == 0 &&
+		list_empty(&anchor->urb_list);
+}
+
 /* Callers must hold anchor->lock */
 static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
 {
 	urb->anchor = NULL;
 	list_del(&urb->anchor_list);
 	usb_put_urb(urb);
-	if (list_empty(&anchor->urb_list))
+	if (usb_anchor_check_wakeup(anchor))
 		wake_up(&anchor->wait);
 }
 
@@ -846,6 +852,39 @@
 EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
 
 /**
+ * usb_anchor_suspend_wakeups
+ * @anchor: the anchor you want to suspend wakeups on
+ *
+ * Call this to stop the last urb being unanchored from waking up any
+ * usb_wait_anchor_empty_timeout waiters. This is used in the hcd urb give-
+ * back path to delay waking up until after the completion handler has run.
+ */
+void usb_anchor_suspend_wakeups(struct usb_anchor *anchor)
+{
+	if (anchor)
+		atomic_inc(&anchor->suspend_wakeups);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_suspend_wakeups);
+
+/**
+ * usb_anchor_resume_wakeups
+ * @anchor: the anchor you want to resume wakeups on
+ *
+ * Allow usb_wait_anchor_empty_timeout waiters to be woken up again, and
+ * wake up any current waiters if the anchor is empty.
+ */
+void usb_anchor_resume_wakeups(struct usb_anchor *anchor)
+{
+	if (!anchor)
+		return;
+
+	atomic_dec(&anchor->suspend_wakeups);
+	if (usb_anchor_check_wakeup(anchor))
+		wake_up(&anchor->wait);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_resume_wakeups);
+
+/**
  * usb_wait_anchor_empty_timeout - wait for an anchor to be unused
  * @anchor: the anchor you want to become unused
  * @timeout: how long you are willing to wait in milliseconds
@@ -858,7 +897,8 @@
 int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
 				  unsigned int timeout)
 {
-	return wait_event_timeout(anchor->wait, list_empty(&anchor->urb_list),
+	return wait_event_timeout(anchor->wait,
+				  usb_anchor_check_wakeup(anchor),
 				  msecs_to_jiffies(timeout));
 }
 EXPORT_SYMBOL_GPL(usb_wait_anchor_empty_timeout);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0a6ee2e..4d11449 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -497,7 +497,7 @@
 		dev->authorized = 1;
 	else {
 		dev->authorized = usb_hcd->authorized_default;
-		dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
+		dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
 	}
 	return dev;
 }
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 8238577..c493836 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -35,6 +35,7 @@
 		unsigned int size);
 extern int usb_get_bos_descriptor(struct usb_device *dev);
 extern void usb_release_bos_descriptor(struct usb_device *dev);
+extern int usb_device_supports_lpm(struct usb_device *udev);
 extern char *usb_cache_string(struct usb_device *udev, int index);
 extern int usb_set_configuration(struct usb_device *dev, int configuration);
 extern int usb_choose_configuration(struct usb_device *udev);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 474162e..74f9cf0 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -584,7 +584,7 @@
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 
-	pm_runtime_put(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	dwc3_debugfs_exit(dwc);
@@ -691,7 +691,6 @@
 
 	usb_phy_init(dwc->usb3_phy);
 	usb_phy_init(dwc->usb2_phy);
-	msleep(100);
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 2e252aa..31443ae 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -165,7 +165,6 @@
 	return 0;
 
 err3:
-	pci_set_drvdata(pci, NULL);
 	platform_device_put(dwc3);
 err1:
 	pci_disable_device(pci);
@@ -180,7 +179,6 @@
 	platform_device_unregister(glue->dwc3);
 	platform_device_unregister(glue->usb2_phy);
 	platform_device_unregister(glue->usb3_phy);
-	pci_set_drvdata(pci, NULL);
 	pci_disable_device(pci);
 }
 
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 7fa93f4..95f7649 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -352,7 +352,7 @@
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	response_pkt = (__le16 *) dwc->setup_buf;
 	*response_pkt = cpu_to_le16(usb_status);
@@ -470,7 +470,7 @@
 
 	default:
 		return -EINVAL;
-	};
+	}
 
 	return 0;
 }
@@ -709,7 +709,7 @@
 		dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		break;
-	};
+	}
 
 	return ret;
 }
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 5e29dde..8cfc319 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -568,10 +568,6 @@
 		dbgp_printk("Could not find attached debug device\n");
 		goto err;
 	}
-	if (ret < 0) {
-		dbgp_printk("Attached device is not a debug device\n");
-		goto err;
-	}
 	dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
 	dbgp_endpoint_in = dbgp_desc.bDebugInEndpoint;
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 48cddf3..a91e642 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -58,6 +58,20 @@
 	   trying to track down.  Never enable these messages for a
 	   production build.
 
+config USB_GADGET_VERBOSE
+	bool "Verbose debugging Messages (DEVELOPMENT)"
+	depends on USB_GADGET_DEBUG
+	help
+	   Many controller and gadget drivers will print verbose debugging
+	   messages if you use this option to ask for those messages.
+
+	   Avoid enabling these messages, even if you're actively
+	   debugging such a driver.  Many drivers will emit so many
+	   messages that the driver timings are affected, which will
+	   either create new failure modes or remove the one you're
+	   trying to track down.  Never enable these messages for a
+	   production build.
+
 config USB_GADGET_DEBUG_FILES
 	boolean "Debugging information files (DEVELOPMENT)"
 	depends on PROC_FS
@@ -525,6 +539,9 @@
 config USB_F_RNDIS
 	tristate
 
+config USB_F_MASS_STORAGE
+	tristate
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
@@ -662,6 +679,16 @@
 	help
 	  The Phonet protocol implementation for USB device.
 
+config USB_CONFIGFS_MASS_STORAGE
+	boolean "Mass storage"
+	depends on USB_CONFIGFS
+	select USB_F_MASS_STORAGE
+	help
+	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
+	  As its storage repository it can use a regular file or a block
+	  device (in much the same way as the "loop" device driver),
+	  specified as a module parameter or sysfs option.
+
 config USB_ZERO
 	tristate "Gadget Zero (DEVELOPMENT)"
 	select USB_LIBCOMPOSITE
@@ -878,6 +905,7 @@
 	tristate "Mass Storage Gadget"
 	depends on BLOCK
 	select USB_LIBCOMPOSITE
+	select USB_F_MASS_STORAGE
 	help
 	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
 	  As its storage repository it can use a regular file or a block
@@ -1001,6 +1029,7 @@
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
 	select USB_F_ACM
+	select USB_F_MASS_STORAGE
 	help
 	  This driver provides two functions in one configuration:
 	  a mass storage, and a CDC ACM (serial port) link.
@@ -1015,8 +1044,8 @@
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
 	select USB_U_ETHER
-	select USB_U_RNDIS
 	select USB_F_ACM
+	select USB_F_MASS_STORAGE
 	help
 	  The Multifunction Composite Gadget provides Ethernet (RNDIS
 	  and/or CDC Ethernet), mass storage and ACM serial link
@@ -1035,6 +1064,8 @@
 config USB_G_MULTI_RNDIS
 	bool "RNDIS + CDC Serial + Storage configuration"
 	depends on USB_G_MULTI
+	select USB_U_RNDIS
+	select USB_F_RNDIS
 	default y
 	help
 	  This option enables a configuration with RNDIS, CDC Serial and
@@ -1048,6 +1079,7 @@
 	bool "CDC Ethernet + CDC Serial + Storage configuration"
 	depends on USB_G_MULTI
 	default n
+	select USB_F_ECM
 	help
 	  This option enables a configuration with CDC Ethernet (ECM), CDC
 	  Serial and Mass Storage functions available in the Multifunction
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 386db9d..f1af396 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -1,7 +1,8 @@
 #
 # USB peripheral controller drivers
 #
-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_DEBUG)	:= -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_VERBOSE)	+= -DVERBOSE_DEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
@@ -60,6 +61,8 @@
 obj-$(CONFIG_USB_F_SUBSET)	+= usb_f_ecm_subset.o
 usb_f_rndis-y			:= f_rndis.o
 obj-$(CONFIG_USB_F_RNDIS)	+= usb_f_rndis.o
+usb_f_mass_storage-y		:= f_mass_storage.o storage_common.o
+obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o
 
 #
 # USB gadget drivers
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 4b947bb..7bfa134 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -31,16 +31,7 @@
 #define ACM_MS_VENDOR_NUM	0x1d6b	/* Linux Foundation */
 #define ACM_MS_PRODUCT_NUM	0x0106	/* Composite Gadget: ACM + MS*/
 
-/*-------------------------------------------------------------------------*/
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_mass_storage.c"
+#include "f_mass_storage.h"
 
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
@@ -104,18 +95,35 @@
 /****************************** Configurations ******************************/
 
 static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
-FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
 
-static struct fsg_common fsg_common;
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
 
 /*-------------------------------------------------------------------------*/
 static struct usb_function *f_acm;
 static struct usb_function_instance *f_acm_inst;
+
+static struct usb_function_instance *fi_msg;
+static struct usb_function *f_msg;
+
 /*
  * We _always_ have both ACM and mass storage functions.
  */
 static int __init acm_ms_do_config(struct usb_configuration *c)
 {
+	struct fsg_opts *opts;
 	int	status;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -123,31 +131,37 @@
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	f_acm_inst = usb_get_function_instance("acm");
-	if (IS_ERR(f_acm_inst))
-		return PTR_ERR(f_acm_inst);
+	opts = fsg_opts_from_func_inst(fi_msg);
 
 	f_acm = usb_get_function(f_acm_inst);
-	if (IS_ERR(f_acm)) {
-		status = PTR_ERR(f_acm);
-		goto err_func;
+	if (IS_ERR(f_acm))
+		return PTR_ERR(f_acm);
+
+	f_msg = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg)) {
+		status = PTR_ERR(f_msg);
+		goto put_acm;
 	}
 
 	status = usb_add_function(c, f_acm);
 	if (status < 0)
-		goto err_conf;
+		goto put_msg;
 
-	status = fsg_bind_config(c->cdev, c, &fsg_common);
-	if (status < 0)
-		goto err_fsg;
+	status = fsg_common_run_thread(opts->common);
+	if (status)
+		goto remove_acm;
+
+	status = usb_add_function(c, f_msg);
+	if (status)
+		goto remove_acm;
 
 	return 0;
-err_fsg:
+remove_acm:
 	usb_remove_function(c, f_acm);
-err_conf:
+put_msg:
+	usb_put_function(f_msg);
+put_acm:
 	usb_put_function(f_acm);
-err_func:
-	usb_put_function_instance(f_acm_inst);
 	return status;
 }
 
@@ -163,45 +177,82 @@
 static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget	*gadget = cdev->gadget;
+	struct fsg_opts		*opts;
+	struct fsg_config	config;
 	int			status;
-	void			*retp;
 
-	/* set up mass storage function */
-	retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
-	if (IS_ERR(retp)) {
-		status = PTR_ERR(retp);
-		return PTR_ERR(retp);
+	f_acm_inst = usb_get_function_instance("acm");
+	if (IS_ERR(f_acm_inst))
+		return PTR_ERR(f_acm_inst);
+
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto fail_get_msg;
 	}
 
+	/* set up mass storage function */
+	fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers);
+	opts = fsg_opts_from_func_inst(fi_msg);
+
+	opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers);
+	if (status)
+		goto fail;
+
+	status = fsg_common_set_nluns(opts->common, config.nluns);
+	if (status)
+		goto fail_set_nluns;
+
+	status = fsg_common_set_cdev(opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(opts->common, true);
+	status = fsg_common_create_luns(opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(opts->common, config.vendor_name,
+				      config.product_name);
 	/*
 	 * Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
-		goto fail1;
+		goto fail_string_ids;
 	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
 	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
 	if (status < 0)
-		goto fail1;
+		goto fail_string_ids;
 
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
-	fsg_common_put(&fsg_common);
 	return 0;
 
 	/* error recovery */
-fail1:
-	fsg_common_put(&fsg_common);
+fail_string_ids:
+	fsg_common_remove_luns(opts->common);
+fail_set_cdev:
+	fsg_common_free_luns(opts->common);
+fail_set_nluns:
+	fsg_common_free_buffers(opts->common);
+fail:
+	usb_put_function_instance(fi_msg);
+fail_get_msg:
+	usb_put_function_instance(f_acm_inst);
 	return status;
 }
 
 static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
 {
+	usb_put_function(f_msg);
+	usb_put_function_instance(fi_msg);
 	usb_put_function(f_acm);
 	usb_put_function_instance(f_acm_inst);
 	return 0;
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index a9a4346..54a1e29 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3078,8 +3078,6 @@
 	if (dev->active)
 		pci_disable_device(pdev);
 
-	pci_set_drvdata(pdev, NULL);
-
 	udc_remove(dev);
 }
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index d4f0f33..3e7ae70 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -354,7 +354,7 @@
 		return DIV_ROUND_UP(val, 8);
 	default:
 		return DIV_ROUND_UP(val, 2);
-	};
+	}
 }
 
 static int config_buf(struct usb_configuration *config,
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 8f0d614..2588511 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -557,7 +557,7 @@
 
 	fi = usb_get_function_instance(func_name);
 	if (IS_ERR(fi))
-		return ERR_PTR(PTR_ERR(fi));
+		return ERR_CAST(fi);
 
 	ret = config_item_set_name(&fi->group.cg_item, name);
 	if (ret) {
@@ -991,6 +991,14 @@
 	.su_mutex = __MUTEX_INITIALIZER(gadget_subsys.su_mutex),
 };
 
+void unregister_gadget_item(struct config_item *item)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+
+	unregister_gadget(gi);
+}
+EXPORT_SYMBOL(unregister_gadget_item);
+
 static int __init gadget_cfs_init(void)
 {
 	int ret;
diff --git a/drivers/usb/gadget/configfs.h b/drivers/usb/gadget/configfs.h
new file mode 100644
index 0000000..a7b564a
--- /dev/null
+++ b/drivers/usb/gadget/configfs.h
@@ -0,0 +1,6 @@
+#ifndef USB__GADGET__CONFIGFS__H
+#define USB__GADGET__CONFIGFS__H
+
+void unregister_gadget_item(struct config_item *item);
+
+#endif /*  USB__GADGET__CONFIGFS__H */
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index b8a2376..8f4dae3 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -544,7 +544,7 @@
 		 default:
 			 val = "ctrl";
 			 break;
-		 }; val; }),
+		 } val; }),
 		max, ep->stream_en ? "enabled" : "disabled");
 
 	/* at this point real hardware should be NAKing transfers
@@ -2271,7 +2271,7 @@
 		default:
 			s = "?";
 			break;
-		 }; s; }),
+		 } s; }),
 		ep, ep ? (usb_pipein(urb->pipe) ? "in" : "out") : "",
 		({ char *s; \
 		switch (usb_pipetype(urb->pipe)) { \
@@ -2287,7 +2287,7 @@
 		default: \
 			s = "-iso"; \
 			break; \
-		}; s; }),
+		} s; }),
 		urb->actual_length, urb->transfer_buffer_length);
 }
 
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a01d7d3..a03ba2c 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -213,12 +213,14 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/freezer.h>
+#include <linux/module.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/composite.h>
 
 #include "gadget_chips.h"
+#include "configfs.h"
 
 
 /*------------------------------------------------------------------------*/
@@ -228,26 +230,30 @@
 
 static const char fsg_string_interface[] = "Mass Storage";
 
-#include "storage_common.c"
+#include "storage_common.h"
+#include "f_mass_storage.h"
 
+/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
+static struct usb_string		fsg_strings[] = {
+	{FSG_STRING_INTERFACE,		fsg_string_interface},
+	{}
+};
+
+static struct usb_gadget_strings	fsg_stringtab = {
+	.language	= 0x0409,		/* en-us */
+	.strings	= fsg_strings,
+};
+
+static struct usb_gadget_strings *fsg_strings_array[] = {
+	&fsg_stringtab,
+	NULL,
+};
 
 /*-------------------------------------------------------------------------*/
 
 struct fsg_dev;
 struct fsg_common;
 
-/* FSF callback functions */
-struct fsg_operations {
-	/*
-	 * Callback function to call when thread exits.  If no
-	 * callback is set or it returns value lower then zero MSF
-	 * will force eject all LUNs it operates on (including those
-	 * marked as non-removable or with prevent_medium_removal flag
-	 * set).
-	 */
-	int (*thread_exits)(struct fsg_common *common);
-};
-
 /* Data shared by all the FSG instances. */
 struct fsg_common {
 	struct usb_gadget	*gadget;
@@ -268,13 +274,14 @@
 	struct fsg_buffhd	*next_buffhd_to_fill;
 	struct fsg_buffhd	*next_buffhd_to_drain;
 	struct fsg_buffhd	*buffhds;
+	unsigned int		fsg_num_buffers;
 
 	int			cmnd_size;
 	u8			cmnd[MAX_COMMAND_SIZE];
 
 	unsigned int		nluns;
 	unsigned int		lun;
-	struct fsg_lun		*luns;
+	struct fsg_lun		**luns;
 	struct fsg_lun		*curlun;
 
 	unsigned int		bulk_out_maxpacket;
@@ -294,6 +301,7 @@
 	unsigned int		short_packet_received:1;
 	unsigned int		bad_lun_okay:1;
 	unsigned int		running:1;
+	unsigned int		sysfs:1;
 
 	int			thread_wakeup_needed;
 	struct completion	thread_notifier;
@@ -313,27 +321,6 @@
 	struct kref		ref;
 };
 
-struct fsg_config {
-	unsigned nluns;
-	struct fsg_lun_config {
-		const char *filename;
-		char ro;
-		char removable;
-		char cdrom;
-		char nofua;
-	} luns[FSG_MAX_LUNS];
-
-	/* Callback functions. */
-	const struct fsg_operations	*ops;
-	/* Gadget's private data. */
-	void			*private_data;
-
-	const char *vendor_name;		/*  8 characters or less */
-	const char *product_name;		/* 16 characters or less */
-
-	char			can_stall;
-};
-
 struct fsg_dev {
 	struct usb_function	function;
 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
@@ -2172,7 +2159,7 @@
 		common->data_dir = DATA_DIR_NONE;
 	common->lun = cbw->Lun;
 	if (common->lun < common->nluns)
-		common->curlun = &common->luns[common->lun];
+		common->curlun = common->luns[common->lun];
 	else
 		common->curlun = NULL;
 	common->tag = cbw->Tag;
@@ -2244,7 +2231,7 @@
 	if (common->fsg) {
 		fsg = common->fsg;
 
-		for (i = 0; i < fsg_num_buffers; ++i) {
+		for (i = 0; i < common->fsg_num_buffers; ++i) {
 			struct fsg_buffhd *bh = &common->buffhds[i];
 
 			if (bh->inreq) {
@@ -2303,7 +2290,7 @@
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	/* Allocate the requests */
-	for (i = 0; i < fsg_num_buffers; ++i) {
+	for (i = 0; i < common->fsg_num_buffers; ++i) {
 		struct fsg_buffhd	*bh = &common->buffhds[i];
 
 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
@@ -2320,7 +2307,9 @@
 
 	common->running = 1;
 	for (i = 0; i < common->nluns; ++i)
-		common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
+		if (common->luns[i])
+			common->luns[i]->unit_attention_data =
+				SS_RESET_OCCURRED;
 	return rc;
 }
 
@@ -2372,7 +2361,7 @@
 
 	/* Cancel all the pending transfers */
 	if (likely(common->fsg)) {
-		for (i = 0; i < fsg_num_buffers; ++i) {
+		for (i = 0; i < common->fsg_num_buffers; ++i) {
 			bh = &common->buffhds[i];
 			if (bh->inreq_busy)
 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
@@ -2384,7 +2373,7 @@
 		/* Wait until everything is idle */
 		for (;;) {
 			int num_active = 0;
-			for (i = 0; i < fsg_num_buffers; ++i) {
+			for (i = 0; i < common->fsg_num_buffers; ++i) {
 				bh = &common->buffhds[i];
 				num_active += bh->inreq_busy + bh->outreq_busy;
 			}
@@ -2407,7 +2396,7 @@
 	 */
 	spin_lock_irq(&common->lock);
 
-	for (i = 0; i < fsg_num_buffers; ++i) {
+	for (i = 0; i < common->fsg_num_buffers; ++i) {
 		bh = &common->buffhds[i];
 		bh->state = BUF_STATE_EMPTY;
 	}
@@ -2420,7 +2409,9 @@
 		common->state = FSG_STATE_STATUS_PHASE;
 	else {
 		for (i = 0; i < common->nluns; ++i) {
-			curlun = &common->luns[i];
+			curlun = common->luns[i];
+			if (!curlun)
+				continue;
 			curlun->prevent_medium_removal = 0;
 			curlun->sense_data = SS_NO_SENSE;
 			curlun->unit_attention_data = SS_NO_SENSE;
@@ -2462,8 +2453,9 @@
 		 * CONFIG_CHANGE cases.
 		 */
 		/* for (i = 0; i < common->nluns; ++i) */
-		/*	common->luns[i].unit_attention_data = */
-		/*		SS_RESET_OCCURRED;  */
+		/*	if (common->luns[i]) */
+		/*		common->luns[i]->unit_attention_data = */
+		/*			SS_RESET_OCCURRED;  */
 		break;
 
 	case FSG_STATE_CONFIG_CHANGE:
@@ -2559,12 +2551,13 @@
 
 	if (!common->ops || !common->ops->thread_exits
 	 || common->ops->thread_exits(common) < 0) {
-		struct fsg_lun *curlun = common->luns;
+		struct fsg_lun **curlun_it = common->luns;
 		unsigned i = common->nluns;
 
 		down_write(&common->filesem);
-		for (; i--; ++curlun) {
-			if (!fsg_lun_is_open(curlun))
+		for (; i--; ++curlun_it) {
+			struct fsg_lun *curlun = *curlun_it;
+			if (!curlun || !fsg_lun_is_open(curlun))
 				continue;
 
 			fsg_lun_close(curlun);
@@ -2580,6 +2573,56 @@
 
 /*************************** DEVICE ATTRIBUTES ***************************/
 
+static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+
+	return fsg_show_ro(curlun, buf);
+}
+
+static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+
+	return fsg_show_nofua(curlun, buf);
+}
+
+static ssize_t file_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+
+	return fsg_show_file(curlun, filesem, buf);
+}
+
+static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+
+	return fsg_store_ro(curlun, filesem, buf, count);
+}
+
+static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+
+	return fsg_store_nofua(curlun, buf, count);
+}
+
+static ssize_t file_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+
+	return fsg_store_file(curlun, filesem, buf, count);
+}
+
 static DEVICE_ATTR_RW(ro);
 static DEVICE_ATTR_RW(nofua);
 static DEVICE_ATTR_RW(file);
@@ -2597,221 +2640,422 @@
 	/* Nothing needs to be done */
 }
 
-static inline void fsg_common_get(struct fsg_common *common)
+void fsg_common_get(struct fsg_common *common)
 {
 	kref_get(&common->ref);
 }
+EXPORT_SYMBOL_GPL(fsg_common_get);
 
-static inline void fsg_common_put(struct fsg_common *common)
+void fsg_common_put(struct fsg_common *common)
 {
 	kref_put(&common->ref, fsg_common_release);
 }
+EXPORT_SYMBOL_GPL(fsg_common_put);
 
-static struct fsg_common *fsg_common_init(struct fsg_common *common,
-					  struct usb_composite_dev *cdev,
-					  struct fsg_config *cfg)
+/* check if fsg_num_buffers is within a valid range */
+static inline int fsg_num_buffers_validate(unsigned int fsg_num_buffers)
 {
-	struct usb_gadget *gadget = cdev->gadget;
-	struct fsg_buffhd *bh;
-	struct fsg_lun *curlun;
-	struct fsg_lun_config *lcfg;
-	int nluns, i, rc;
-	char *pathbuf;
+	if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
+		return 0;
+	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
+	       fsg_num_buffers, 2, 4);
+	return -EINVAL;
+}
 
-	rc = fsg_num_buffers_validate();
-	if (rc != 0)
-		return ERR_PTR(rc);
-
-	/* Find out how many LUNs there should be */
-	nluns = cfg->nluns;
-	if (nluns < 1 || nluns > FSG_MAX_LUNS) {
-		dev_err(&gadget->dev, "invalid number of LUNs: %u\n", nluns);
-		return ERR_PTR(-EINVAL);
-	}
-
-	/* Allocate? */
+static struct fsg_common *fsg_common_setup(struct fsg_common *common)
+{
 	if (!common) {
-		common = kzalloc(sizeof *common, GFP_KERNEL);
+		common = kzalloc(sizeof(*common), GFP_KERNEL);
 		if (!common)
 			return ERR_PTR(-ENOMEM);
 		common->free_storage_on_release = 1;
 	} else {
-		memset(common, 0, sizeof *common);
 		common->free_storage_on_release = 0;
 	}
-
-	common->buffhds = kcalloc(fsg_num_buffers,
-				  sizeof *(common->buffhds), GFP_KERNEL);
-	if (!common->buffhds) {
-		if (common->free_storage_on_release)
-			kfree(common);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	common->ops = cfg->ops;
-	common->private_data = cfg->private_data;
-
-	common->gadget = gadget;
-	common->ep0 = gadget->ep0;
-	common->ep0req = cdev->req;
-	common->cdev = cdev;
-
-	/* Maybe allocate device-global string IDs, and patch descriptors */
-	if (fsg_strings[FSG_STRING_INTERFACE].id == 0) {
-		rc = usb_string_id(cdev);
-		if (unlikely(rc < 0))
-			goto error_release;
-		fsg_strings[FSG_STRING_INTERFACE].id = rc;
-		fsg_intf_desc.iInterface = rc;
-	}
-
-	/*
-	 * Create the LUNs, open their backing files, and register the
-	 * LUN devices in sysfs.
-	 */
-	curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL);
-	if (unlikely(!curlun)) {
-		rc = -ENOMEM;
-		goto error_release;
-	}
-	common->luns = curlun;
-
 	init_rwsem(&common->filesem);
+	spin_lock_init(&common->lock);
+	kref_init(&common->ref);
+	init_completion(&common->thread_notifier);
+	init_waitqueue_head(&common->fsg_wait);
+	common->state = FSG_STATE_TERMINATED;
 
-	for (i = 0, lcfg = cfg->luns; i < nluns; ++i, ++curlun, ++lcfg) {
-		curlun->cdrom = !!lcfg->cdrom;
-		curlun->ro = lcfg->cdrom || lcfg->ro;
-		curlun->initially_ro = curlun->ro;
-		curlun->removable = lcfg->removable;
-		curlun->dev.release = fsg_lun_release;
-		curlun->dev.parent = &gadget->dev;
-		/* curlun->dev.driver = &fsg_driver.driver; XXX */
-		dev_set_drvdata(&curlun->dev, &common->filesem);
-		dev_set_name(&curlun->dev, "lun%d", i);
+	return common;
+}
 
-		rc = device_register(&curlun->dev);
-		if (rc) {
-			INFO(common, "failed to register LUN%d: %d\n", i, rc);
-			common->nluns = i;
-			put_device(&curlun->dev);
-			goto error_release;
+void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
+{
+	common->sysfs = sysfs;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
+
+static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
+{
+	if (buffhds) {
+		struct fsg_buffhd *bh = buffhds;
+		while (n--) {
+			kfree(bh->buf);
+			++bh;
 		}
-
-		rc = device_create_file(&curlun->dev,
-					curlun->cdrom
-				      ? &dev_attr_ro_cdrom
-				      : &dev_attr_ro);
-		if (rc)
-			goto error_luns;
-		rc = device_create_file(&curlun->dev,
-					curlun->removable
-				      ? &dev_attr_file
-				      : &dev_attr_file_nonremovable);
-		if (rc)
-			goto error_luns;
-		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
-		if (rc)
-			goto error_luns;
-
-		if (lcfg->filename) {
-			rc = fsg_lun_open(curlun, lcfg->filename);
-			if (rc)
-				goto error_luns;
-		} else if (!curlun->removable) {
-			ERROR(common, "no file given for LUN%d\n", i);
-			rc = -EINVAL;
-			goto error_luns;
-		}
+		kfree(buffhds);
 	}
-	common->nluns = nluns;
+}
+
+int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
+{
+	struct fsg_buffhd *bh, *buffhds;
+	int i, rc;
+
+	rc = fsg_num_buffers_validate(n);
+	if (rc != 0)
+		return rc;
+
+	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
+	if (!buffhds)
+		return -ENOMEM;
 
 	/* Data buffers cyclic list */
-	bh = common->buffhds;
-	i = fsg_num_buffers;
+	bh = buffhds;
+	i = n;
 	goto buffhds_first_it;
 	do {
 		bh->next = bh + 1;
 		++bh;
 buffhds_first_it:
 		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
-		if (unlikely(!bh->buf)) {
-			rc = -ENOMEM;
+		if (unlikely(!bh->buf))
 			goto error_release;
-		}
 	} while (--i);
-	bh->next = common->buffhds;
+	bh->next = buffhds;
 
-	/* Prepare inquiryString */
-	i = get_default_bcdDevice();
-	snprintf(common->inquiry_string, sizeof common->inquiry_string,
-		 "%-8s%-16s%04x", cfg->vendor_name ?: "Linux",
-		 /* Assume product name dependent on the first LUN */
-		 cfg->product_name ?: (common->luns->cdrom
-				     ? "File-CD Gadget"
-				     : "File-Stor Gadget"),
-		 i);
+	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
+	common->fsg_num_buffers = n;
+	common->buffhds = buffhds;
+
+	return 0;
+
+error_release:
+	/*
+	 * "buf"s pointed to by heads after n - i are NULL
+	 * so releasing them won't hurt
+	 */
+	_fsg_common_free_buffers(buffhds, n);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
+
+static inline void fsg_common_remove_sysfs(struct fsg_lun *lun)
+{
+	device_remove_file(&lun->dev, &dev_attr_nofua);
+	/*
+	 * device_remove_file() =>
+	 *
+	 * here the attr (e.g. dev_attr_ro) is only used to be passed to:
+	 *
+	 *	sysfs_remove_file() =>
+	 *
+	 *	here e.g. both dev_attr_ro_cdrom and dev_attr_ro are in
+	 *	the same namespace and
+	 *	from here only attr->name is passed to:
+	 *
+	 *		sysfs_hash_and_remove()
+	 *
+	 *		attr->name is the same for dev_attr_ro_cdrom and
+	 *		dev_attr_ro
+	 *		attr->name is the same for dev_attr_file and
+	 *		dev_attr_file_nonremovable
+	 *
+	 * so we don't differentiate between removing e.g. dev_attr_ro_cdrom
+	 * and dev_attr_ro
+	 */
+	device_remove_file(&lun->dev, &dev_attr_ro);
+	device_remove_file(&lun->dev, &dev_attr_file);
+}
+
+void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs)
+{
+	if (sysfs) {
+		fsg_common_remove_sysfs(lun);
+		device_unregister(&lun->dev);
+	}
+	fsg_lun_close(lun);
+	kfree(lun);
+}
+EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
+
+static void _fsg_common_remove_luns(struct fsg_common *common, int n)
+{
+	int i;
+
+	for (i = 0; i < n; ++i)
+		if (common->luns[i]) {
+			fsg_common_remove_lun(common->luns[i], common->sysfs);
+			common->luns[i] = NULL;
+		}
+}
+EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
+
+void fsg_common_remove_luns(struct fsg_common *common)
+{
+	_fsg_common_remove_luns(common, common->nluns);
+}
+
+void fsg_common_free_luns(struct fsg_common *common)
+{
+	fsg_common_remove_luns(common);
+	kfree(common->luns);
+	common->luns = NULL;
+}
+EXPORT_SYMBOL_GPL(fsg_common_free_luns);
+
+int fsg_common_set_nluns(struct fsg_common *common, int nluns)
+{
+	struct fsg_lun **curlun;
+
+	/* Find out how many LUNs there should be */
+	if (nluns < 1 || nluns > FSG_MAX_LUNS) {
+		pr_err("invalid number of LUNs: %u\n", nluns);
+		return -EINVAL;
+	}
+
+	curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL);
+	if (unlikely(!curlun))
+		return -ENOMEM;
+
+	if (common->luns)
+		fsg_common_free_luns(common);
+
+	common->luns = curlun;
+	common->nluns = nluns;
+
+	pr_info("Number of LUNs=%d\n", common->nluns);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_nluns);
+
+void fsg_common_set_ops(struct fsg_common *common,
+			const struct fsg_operations *ops)
+{
+	common->ops = ops;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_ops);
+
+void fsg_common_free_buffers(struct fsg_common *common)
+{
+	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
+	common->buffhds = NULL;
+}
+EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
+
+int fsg_common_set_cdev(struct fsg_common *common,
+			 struct usb_composite_dev *cdev, bool can_stall)
+{
+	struct usb_string *us;
+
+	common->gadget = cdev->gadget;
+	common->ep0 = cdev->gadget->ep0;
+	common->ep0req = cdev->req;
+	common->cdev = cdev;
+
+	us = usb_gstrings_attach(cdev, fsg_strings_array,
+				 ARRAY_SIZE(fsg_strings));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+
+	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
 
 	/*
 	 * Some peripheral controllers are known not to be able to
 	 * halt bulk endpoints correctly.  If one of them is present,
 	 * disable stalls.
 	 */
-	common->can_stall = cfg->can_stall &&
-		!(gadget_is_at91(common->gadget));
+	common->can_stall = can_stall && !(gadget_is_at91(common->gadget));
 
-	spin_lock_init(&common->lock);
-	kref_init(&common->ref);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
 
+static inline int fsg_common_add_sysfs(struct fsg_common *common,
+				       struct fsg_lun *lun)
+{
+	int rc;
+
+	rc = device_register(&lun->dev);
+	if (rc) {
+		put_device(&lun->dev);
+		return rc;
+	}
+
+	rc = device_create_file(&lun->dev,
+				lun->cdrom
+			      ? &dev_attr_ro_cdrom
+			      : &dev_attr_ro);
+	if (rc)
+		goto error;
+	rc = device_create_file(&lun->dev,
+				lun->removable
+			      ? &dev_attr_file
+			      : &dev_attr_file_nonremovable);
+	if (rc)
+		goto error;
+	rc = device_create_file(&lun->dev, &dev_attr_nofua);
+	if (rc)
+		goto error;
+
+	return 0;
+
+error:
+	/* removing nonexistent files is a no-op */
+	fsg_common_remove_sysfs(lun);
+	device_unregister(&lun->dev);
+	return rc;
+}
+
+int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
+			  unsigned int id, const char *name,
+			  const char **name_pfx)
+{
+	struct fsg_lun *lun;
+	char *pathbuf, *p;
+	int rc = -ENOMEM;
+
+	if (!common->nluns || !common->luns)
+		return -ENODEV;
+
+	if (common->luns[id])
+		return -EBUSY;
+
+	if (!cfg->filename && !cfg->removable) {
+		pr_err("no file given for LUN%d\n", id);
+		return -EINVAL;
+	}
+
+	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
+	if (!lun)
+		return -ENOMEM;
+
+	lun->name_pfx = name_pfx;
+
+	lun->cdrom = !!cfg->cdrom;
+	lun->ro = cfg->cdrom || cfg->ro;
+	lun->initially_ro = lun->ro;
+	lun->removable = !!cfg->removable;
+
+	if (!common->sysfs) {
+		/* we DON'T own the name!*/
+		lun->name = name;
+	} else {
+		lun->dev.release = fsg_lun_release;
+		lun->dev.parent = &common->gadget->dev;
+		dev_set_drvdata(&lun->dev, &common->filesem);
+		dev_set_name(&lun->dev, "%s", name);
+		lun->name = dev_name(&lun->dev);
+
+		rc = fsg_common_add_sysfs(common, lun);
+		if (rc) {
+			pr_info("failed to register LUN%d: %d\n", id, rc);
+			goto error_sysfs;
+		}
+	}
+
+	common->luns[id] = lun;
+
+	if (cfg->filename) {
+		rc = fsg_lun_open(lun, cfg->filename);
+		if (rc)
+			goto error_lun;
+	}
+
+	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
+	p = "(no medium)";
+	if (fsg_lun_is_open(lun)) {
+		p = "(error)";
+		if (pathbuf) {
+			p = d_path(&lun->filp->f_path, pathbuf, PATH_MAX);
+			if (IS_ERR(p))
+				p = "(error)";
+		}
+	}
+	pr_info("LUN: %s%s%sfile: %s\n",
+	      lun->removable ? "removable " : "",
+	      lun->ro ? "read only " : "",
+	      lun->cdrom ? "CD-ROM " : "",
+	      p);
+	kfree(pathbuf);
+
+	return 0;
+
+error_lun:
+	if (common->sysfs) {
+		fsg_common_remove_sysfs(lun);
+		device_unregister(&lun->dev);
+	}
+	fsg_lun_close(lun);
+	common->luns[id] = NULL;
+error_sysfs:
+	kfree(lun);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsg_common_create_lun);
+
+int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
+{
+	char buf[8]; /* enough for 100000000 different numbers, decimal */
+	int i, rc;
+
+	for (i = 0; i < common->nluns; ++i) {
+		snprintf(buf, sizeof(buf), "lun%d", i);
+		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
+		if (rc)
+			goto fail;
+	}
+
+	pr_info("Number of LUNs=%d\n", common->nluns);
+
+	return 0;
+
+fail:
+	_fsg_common_remove_luns(common, i);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsg_common_create_luns);
+
+void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
+				   const char *pn)
+{
+	int i;
+
+	/* Prepare inquiryString */
+	i = get_default_bcdDevice();
+	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
+		 "%-8s%-16s%04x", vn ?: "Linux",
+		 /* Assume product name dependent on the first LUN */
+		 pn ?: ((*common->luns)->cdrom
+		     ? "File-CD Gadget"
+		     : "File-Stor Gadget"),
+		 i);
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
+
+int fsg_common_run_thread(struct fsg_common *common)
+{
+	common->state = FSG_STATE_IDLE;
 	/* Tell the thread to start working */
 	common->thread_task =
 		kthread_create(fsg_main_thread, common, "file-storage");
 	if (IS_ERR(common->thread_task)) {
-		rc = PTR_ERR(common->thread_task);
-		goto error_release;
+		common->state = FSG_STATE_TERMINATED;
+		return PTR_ERR(common->thread_task);
 	}
-	init_completion(&common->thread_notifier);
-	init_waitqueue_head(&common->fsg_wait);
-
-	/* Information */
-	INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
-	INFO(common, "Number of LUNs=%d\n", common->nluns);
-
-	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
-	for (i = 0, nluns = common->nluns, curlun = common->luns;
-	     i < nluns;
-	     ++curlun, ++i) {
-		char *p = "(no medium)";
-		if (fsg_lun_is_open(curlun)) {
-			p = "(error)";
-			if (pathbuf) {
-				p = d_path(&curlun->filp->f_path,
-					   pathbuf, PATH_MAX);
-				if (IS_ERR(p))
-					p = "(error)";
-			}
-		}
-		LINFO(curlun, "LUN: %s%s%sfile: %s\n",
-		      curlun->removable ? "removable " : "",
-		      curlun->ro ? "read only " : "",
-		      curlun->cdrom ? "CD-ROM " : "",
-		      p);
-	}
-	kfree(pathbuf);
 
 	DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task));
 
 	wake_up_process(common->thread_task);
 
-	return common;
-
-error_luns:
-	common->nluns = i + 1;
-error_release:
-	common->state = FSG_STATE_TERMINATED;	/* The thread is dead */
-	/* Call fsg_common_release() directly, ref might be not initialised. */
-	fsg_common_release(&common->ref);
-	return ERR_PTR(rc);
+	return 0;
 }
+EXPORT_SYMBOL_GPL(fsg_common_run_thread);
 
 static void fsg_common_release(struct kref *ref)
 {
@@ -2824,36 +3068,26 @@
 	}
 
 	if (likely(common->luns)) {
-		struct fsg_lun *lun = common->luns;
+		struct fsg_lun **lun_it = common->luns;
 		unsigned i = common->nluns;
 
 		/* In error recovery common->nluns may be zero. */
-		for (; i; --i, ++lun) {
-			device_remove_file(&lun->dev, &dev_attr_nofua);
-			device_remove_file(&lun->dev,
-					   lun->cdrom
-					 ? &dev_attr_ro_cdrom
-					 : &dev_attr_ro);
-			device_remove_file(&lun->dev,
-					   lun->removable
-					 ? &dev_attr_file
-					 : &dev_attr_file_nonremovable);
+		for (; i; --i, ++lun_it) {
+			struct fsg_lun *lun = *lun_it;
+			if (!lun)
+				continue;
+			if (common->sysfs)
+				fsg_common_remove_sysfs(lun);
 			fsg_lun_close(lun);
-			device_unregister(&lun->dev);
+			if (common->sysfs)
+				device_unregister(&lun->dev);
+			kfree(lun);
 		}
 
 		kfree(common->luns);
 	}
 
-	{
-		struct fsg_buffhd *bh = common->buffhds;
-		unsigned i = fsg_num_buffers;
-		do {
-			kfree(bh->buf);
-		} while (++bh, --i);
-	}
-
-	kfree(common->buffhds);
+	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
 	if (common->free_storage_on_release)
 		kfree(common);
 }
@@ -2861,24 +3095,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
-{
-	struct fsg_dev		*fsg = fsg_from_func(f);
-	struct fsg_common	*common = fsg->common;
-
-	DBG(fsg, "unbind\n");
-	if (fsg->common->fsg == fsg) {
-		fsg->common->new_fsg = NULL;
-		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
-		/* FIXME: make interruptible or killable somehow? */
-		wait_event(common->fsg_wait, common->fsg != fsg);
-	}
-
-	fsg_common_put(common);
-	usb_free_all_descriptors(&fsg->function);
-	kfree(fsg);
-}
-
 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
@@ -2887,6 +3103,19 @@
 	struct usb_ep		*ep;
 	unsigned		max_burst;
 	int			ret;
+	struct fsg_opts		*opts;
+
+	opts = fsg_opts_from_func_inst(f->fi);
+	if (!opts->no_configfs) {
+		ret = fsg_common_set_cdev(fsg->common, c->cdev,
+					  fsg->common->can_stall);
+		if (ret)
+			return ret;
+		fsg_common_set_inquiry_string(fsg->common, 0, 0);
+		ret = fsg_common_run_thread(fsg->common);
+		if (ret)
+			return ret;
+	}
 
 	fsg->gadget = gadget;
 
@@ -2939,95 +3168,472 @@
 	return -ENOTSUPP;
 }
 
-/****************************** ADD FUNCTION ******************************/
+/****************************** ALLOCATE FUNCTION *************************/
 
-static struct usb_gadget_strings *fsg_strings_array[] = {
-	&fsg_stringtab,
+static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct fsg_common	*common = fsg->common;
+
+	DBG(fsg, "unbind\n");
+	if (fsg->common->fsg == fsg) {
+		fsg->common->new_fsg = NULL;
+		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+		/* FIXME: make interruptible or killable somehow? */
+		wait_event(common->fsg_wait, common->fsg != fsg);
+	}
+
+	usb_free_all_descriptors(&fsg->function);
+}
+
+static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct fsg_lun_opts, group);
+}
+
+static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct fsg_opts,
+			    func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(fsg_lun_opts);
+CONFIGFS_ATTR_OPS(fsg_lun_opts);
+
+static void fsg_lun_attr_release(struct config_item *item)
+{
+	struct fsg_lun_opts *lun_opts;
+
+	lun_opts = to_fsg_lun_opts(item);
+	kfree(lun_opts);
+}
+
+static struct configfs_item_operations fsg_lun_item_ops = {
+	.release		= fsg_lun_attr_release,
+	.show_attribute		= fsg_lun_opts_attr_show,
+	.store_attribute	= fsg_lun_opts_attr_store,
+};
+
+static ssize_t fsg_lun_opts_file_show(struct fsg_lun_opts *opts, char *page)
+{
+	struct fsg_opts *fsg_opts;
+
+	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
+}
+
+static ssize_t fsg_lun_opts_file_store(struct fsg_lun_opts *opts,
+				       const char *page, size_t len)
+{
+	struct fsg_opts *fsg_opts;
+
+	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
+}
+
+static struct fsg_lun_opts_attribute fsg_lun_opts_file =
+	__CONFIGFS_ATTR(file, S_IRUGO | S_IWUSR, fsg_lun_opts_file_show,
+			fsg_lun_opts_file_store);
+
+static ssize_t fsg_lun_opts_ro_show(struct fsg_lun_opts *opts, char *page)
+{
+	return fsg_show_ro(opts->lun, page);
+}
+
+static ssize_t fsg_lun_opts_ro_store(struct fsg_lun_opts *opts,
+				       const char *page, size_t len)
+{
+	struct fsg_opts *fsg_opts;
+
+	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
+}
+
+static struct fsg_lun_opts_attribute fsg_lun_opts_ro =
+	__CONFIGFS_ATTR(ro, S_IRUGO | S_IWUSR, fsg_lun_opts_ro_show,
+			fsg_lun_opts_ro_store);
+
+static ssize_t fsg_lun_opts_removable_show(struct fsg_lun_opts *opts,
+					   char *page)
+{
+	return fsg_show_removable(opts->lun, page);
+}
+
+static ssize_t fsg_lun_opts_removable_store(struct fsg_lun_opts *opts,
+				       const char *page, size_t len)
+{
+	return fsg_store_removable(opts->lun, page, len);
+}
+
+static struct fsg_lun_opts_attribute fsg_lun_opts_removable =
+	__CONFIGFS_ATTR(removable, S_IRUGO | S_IWUSR,
+			fsg_lun_opts_removable_show,
+			fsg_lun_opts_removable_store);
+
+static ssize_t fsg_lun_opts_cdrom_show(struct fsg_lun_opts *opts, char *page)
+{
+	return fsg_show_cdrom(opts->lun, page);
+}
+
+static ssize_t fsg_lun_opts_cdrom_store(struct fsg_lun_opts *opts,
+				       const char *page, size_t len)
+{
+	struct fsg_opts *fsg_opts;
+
+	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
+			       len);
+}
+
+static struct fsg_lun_opts_attribute fsg_lun_opts_cdrom =
+	__CONFIGFS_ATTR(cdrom, S_IRUGO | S_IWUSR, fsg_lun_opts_cdrom_show,
+			fsg_lun_opts_cdrom_store);
+
+static ssize_t fsg_lun_opts_nofua_show(struct fsg_lun_opts *opts, char *page)
+{
+	return fsg_show_nofua(opts->lun, page);
+}
+
+static ssize_t fsg_lun_opts_nofua_store(struct fsg_lun_opts *opts,
+				       const char *page, size_t len)
+{
+	return fsg_store_nofua(opts->lun, page, len);
+}
+
+static struct fsg_lun_opts_attribute fsg_lun_opts_nofua =
+	__CONFIGFS_ATTR(nofua, S_IRUGO | S_IWUSR, fsg_lun_opts_nofua_show,
+			fsg_lun_opts_nofua_store);
+
+static struct configfs_attribute *fsg_lun_attrs[] = {
+	&fsg_lun_opts_file.attr,
+	&fsg_lun_opts_ro.attr,
+	&fsg_lun_opts_removable.attr,
+	&fsg_lun_opts_cdrom.attr,
+	&fsg_lun_opts_nofua.attr,
 	NULL,
 };
 
-static int fsg_bind_config(struct usb_composite_dev *cdev,
-			   struct usb_configuration *c,
-			   struct fsg_common *common)
+static struct config_item_type fsg_lun_type = {
+	.ct_item_ops	= &fsg_lun_item_ops,
+	.ct_attrs	= fsg_lun_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group *fsg_lun_make(struct config_group *group,
+					 const char *name)
 {
-	struct fsg_dev *fsg;
-	int rc;
+	struct fsg_lun_opts *opts;
+	struct fsg_opts *fsg_opts;
+	struct fsg_lun_config config;
+	char *num_str;
+	u8 num;
+	int ret;
 
-	fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
-	if (unlikely(!fsg))
-		return -ENOMEM;
+	num_str = strchr(name, '.');
+	if (!num_str) {
+		pr_err("Unable to locate . in LUN.NUMBER\n");
+		return ERR_PTR(-EINVAL);
+	}
+	num_str++;
 
-	fsg->function.name        = FSG_DRIVER_DESC;
-	fsg->function.strings     = fsg_strings_array;
-	fsg->function.bind        = fsg_bind;
-	fsg->function.unbind      = fsg_unbind;
-	fsg->function.setup       = fsg_setup;
-	fsg->function.set_alt     = fsg_set_alt;
-	fsg->function.disable     = fsg_disable;
+	ret = kstrtou8(num_str, 0, &num);
+	if (ret)
+		return ERR_PTR(ret);
 
-	fsg->common               = common;
-	/*
-	 * Our caller holds a reference to common structure so we
-	 * don't have to be worry about it being freed until we return
-	 * from this function.  So instead of incrementing counter now
-	 * and decrement in error recovery we increment it only when
-	 * call to usb_add_function() was successful.
-	 */
+	fsg_opts = to_fsg_opts(&group->cg_item);
+	if (num >= FSG_MAX_LUNS)
+		return ERR_PTR(-ERANGE);
 
-	rc = usb_add_function(c, &fsg->function);
-	if (unlikely(rc))
-		kfree(fsg);
-	else
-		fsg_common_get(fsg->common);
-	return rc;
+	mutex_lock(&fsg_opts->lock);
+	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(&config, 0, sizeof(config));
+	config.removable = true;
+
+	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
+				    (const char **)&group->cg_item.ci_name);
+	if (ret) {
+		kfree(opts);
+		goto out;
+	}
+	opts->lun = fsg_opts->common->luns[num];
+	opts->lun_id = num;
+	mutex_unlock(&fsg_opts->lock);
+
+	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
+
+	return &opts->group;
+out:
+	mutex_unlock(&fsg_opts->lock);
+	return ERR_PTR(ret);
 }
 
+static void fsg_lun_drop(struct config_group *group, struct config_item *item)
+{
+	struct fsg_lun_opts *lun_opts;
+	struct fsg_opts *fsg_opts;
+
+	lun_opts = to_fsg_lun_opts(item);
+	fsg_opts = to_fsg_opts(&group->cg_item);
+
+	mutex_lock(&fsg_opts->lock);
+	if (fsg_opts->refcnt) {
+		struct config_item *gadget;
+
+		gadget = group->cg_item.ci_parent->ci_parent;
+		unregister_gadget_item(gadget);
+	}
+
+	fsg_common_remove_lun(lun_opts->lun, fsg_opts->common->sysfs);
+	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
+	lun_opts->lun_id = 0;
+	mutex_unlock(&fsg_opts->lock);
+
+	config_item_put(item);
+}
+
+CONFIGFS_ATTR_STRUCT(fsg_opts);
+CONFIGFS_ATTR_OPS(fsg_opts);
+
+static void fsg_attr_release(struct config_item *item)
+{
+	struct fsg_opts *opts = to_fsg_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations fsg_item_ops = {
+	.release		= fsg_attr_release,
+	.show_attribute		= fsg_opts_attr_show,
+	.store_attribute	= fsg_opts_attr_store,
+};
+
+static ssize_t fsg_opts_stall_show(struct fsg_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->common->can_stall);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t fsg_opts_stall_store(struct fsg_opts *opts, const char *page,
+				    size_t len)
+{
+	int ret;
+	bool stall;
+
+	mutex_lock(&opts->lock);
+
+	if (opts->refcnt) {
+		mutex_unlock(&opts->lock);
+		return -EBUSY;
+	}
+
+	ret = strtobool(page, &stall);
+	if (!ret) {
+		opts->common->can_stall = stall;
+		ret = len;
+	}
+
+	mutex_unlock(&opts->lock);
+
+	return ret;
+}
+
+static struct fsg_opts_attribute fsg_opts_stall =
+	__CONFIGFS_ATTR(stall, S_IRUGO | S_IWUSR, fsg_opts_stall_show,
+			fsg_opts_stall_store);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+static ssize_t fsg_opts_num_buffers_show(struct fsg_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t fsg_opts_num_buffers_store(struct fsg_opts *opts,
+					  const char *page, size_t len)
+{
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	ret = fsg_num_buffers_validate(num);
+	if (ret)
+		goto end;
+
+	fsg_common_set_num_buffers(opts->common, num);
+	ret = len;
+
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct fsg_opts_attribute fsg_opts_num_buffers =
+	__CONFIGFS_ATTR(num_buffers, S_IRUGO | S_IWUSR,
+			fsg_opts_num_buffers_show,
+			fsg_opts_num_buffers_store);
+
+#endif
+
+static struct configfs_attribute *fsg_attrs[] = {
+	&fsg_opts_stall.attr,
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	&fsg_opts_num_buffers.attr,
+#endif
+	NULL,
+};
+
+static struct configfs_group_operations fsg_group_ops = {
+	.make_group	= fsg_lun_make,
+	.drop_item	= fsg_lun_drop,
+};
+
+static struct config_item_type fsg_func_type = {
+	.ct_item_ops	= &fsg_item_ops,
+	.ct_group_ops	= &fsg_group_ops,
+	.ct_attrs	= fsg_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void fsg_free_inst(struct usb_function_instance *fi)
+{
+	struct fsg_opts *opts;
+
+	opts = fsg_opts_from_func_inst(fi);
+	fsg_common_put(opts->common);
+	kfree(opts);
+}
+
+static struct usb_function_instance *fsg_alloc_inst(void)
+{
+	struct fsg_opts *opts;
+	struct fsg_lun_config config;
+	int rc;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = fsg_free_inst;
+	opts->common = fsg_common_setup(opts->common);
+	if (IS_ERR(opts->common)) {
+		rc = PTR_ERR(opts->common);
+		goto release_opts;
+	}
+	rc = fsg_common_set_nluns(opts->common, FSG_MAX_LUNS);
+	if (rc)
+		goto release_opts;
+
+	rc = fsg_common_set_num_buffers(opts->common,
+					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
+	if (rc)
+		goto release_luns;
+
+	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
+
+	memset(&config, 0, sizeof(config));
+	config.removable = true;
+	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
+			(const char **)&opts->func_inst.group.cg_item.ci_name);
+	opts->lun0.lun = opts->common->luns[0];
+	opts->lun0.lun_id = 0;
+	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
+	opts->default_groups[0] = &opts->lun0.group;
+	opts->func_inst.group.default_groups = opts->default_groups;
+
+	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
+
+	return &opts->func_inst;
+
+release_luns:
+	kfree(opts->common->luns);
+release_opts:
+	kfree(opts);
+	return ERR_PTR(rc);
+}
+
+static void fsg_free(struct usb_function *f)
+{
+	struct fsg_dev *fsg;
+	struct fsg_opts *opts;
+
+	fsg = container_of(f, struct fsg_dev, function);
+	opts = container_of(f->fi, struct fsg_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+
+	kfree(fsg);
+}
+
+static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
+{
+	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
+	struct fsg_common *common = opts->common;
+	struct fsg_dev *fsg;
+
+	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
+	if (unlikely(!fsg))
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt++;
+	mutex_unlock(&opts->lock);
+	fsg->function.name	= FSG_DRIVER_DESC;
+	fsg->function.bind	= fsg_bind;
+	fsg->function.unbind	= fsg_unbind;
+	fsg->function.setup	= fsg_setup;
+	fsg->function.set_alt	= fsg_set_alt;
+	fsg->function.disable	= fsg_disable;
+	fsg->function.free_func	= fsg_free;
+
+	fsg->common               = common;
+
+	return &fsg->function;
+}
+
+DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michal Nazarewicz");
 
 /************************* Module parameters *************************/
 
-struct fsg_module_parameters {
-	char		*file[FSG_MAX_LUNS];
-	bool		ro[FSG_MAX_LUNS];
-	bool		removable[FSG_MAX_LUNS];
-	bool		cdrom[FSG_MAX_LUNS];
-	bool		nofua[FSG_MAX_LUNS];
 
-	unsigned int	file_count, ro_count, removable_count, cdrom_count;
-	unsigned int	nofua_count;
-	unsigned int	luns;	/* nluns */
-	bool		stall;	/* can_stall */
-};
-
-#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
-	module_param_array_named(prefix ## name, params.name, type,	\
-				 &prefix ## params.name ## _count,	\
-				 S_IRUGO);				\
-	MODULE_PARM_DESC(prefix ## name, desc)
-
-#define _FSG_MODULE_PARAM(prefix, params, name, type, desc)		\
-	module_param_named(prefix ## name, params.name, type,		\
-			   S_IRUGO);					\
-	MODULE_PARM_DESC(prefix ## name, desc)
-
-#define FSG_MODULE_PARAMETERS(prefix, params)				\
-	_FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp,		\
-				"names of backing files or devices");	\
-	_FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool,		\
-				"true to force read-only");		\
-	_FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool,	\
-				"true to simulate removable media");	\
-	_FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool,		\
-				"true to simulate CD-ROM instead of disk"); \
-	_FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool,		\
-				"true to ignore SCSI WRITE(10,12) FUA bit"); \
-	_FSG_MODULE_PARAM(prefix, params, luns, uint,			\
-			  "number of LUNs");				\
-	_FSG_MODULE_PARAM(prefix, params, stall, bool,			\
-			  "false to prevent bulk stalls")
-
-static void
-fsg_config_from_params(struct fsg_config *cfg,
-		       const struct fsg_module_parameters *params)
+void fsg_config_from_params(struct fsg_config *cfg,
+		       const struct fsg_module_parameters *params,
+		       unsigned int fsg_num_buffers)
 {
 	struct fsg_lun_config *lun;
 	unsigned i;
@@ -3055,19 +3661,7 @@
 
 	/* Finalise */
 	cfg->can_stall = params->stall;
+	cfg->fsg_num_buffers = fsg_num_buffers;
 }
+EXPORT_SYMBOL_GPL(fsg_config_from_params);
 
-static inline struct fsg_common *
-fsg_common_from_params(struct fsg_common *common,
-		       struct usb_composite_dev *cdev,
-		       const struct fsg_module_parameters *params)
-	__attribute__((unused));
-static inline struct fsg_common *
-fsg_common_from_params(struct fsg_common *common,
-		       struct usb_composite_dev *cdev,
-		       const struct fsg_module_parameters *params)
-{
-	struct fsg_config cfg;
-	fsg_config_from_params(&cfg, params);
-	return fsg_common_init(common, cdev, &cfg);
-}
diff --git a/drivers/usb/gadget/f_mass_storage.h b/drivers/usb/gadget/f_mass_storage.h
new file mode 100644
index 0000000..b4866fc
--- /dev/null
+++ b/drivers/usb/gadget/f_mass_storage.h
@@ -0,0 +1,166 @@
+#ifndef USB_F_MASS_STORAGE_H
+#define USB_F_MASS_STORAGE_H
+
+#include <linux/usb/composite.h>
+#include "storage_common.h"
+
+struct fsg_module_parameters {
+	char		*file[FSG_MAX_LUNS];
+	bool		ro[FSG_MAX_LUNS];
+	bool		removable[FSG_MAX_LUNS];
+	bool		cdrom[FSG_MAX_LUNS];
+	bool		nofua[FSG_MAX_LUNS];
+
+	unsigned int	file_count, ro_count, removable_count, cdrom_count;
+	unsigned int	nofua_count;
+	unsigned int	luns;	/* nluns */
+	bool		stall;	/* can_stall */
+};
+
+#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
+	module_param_array_named(prefix ## name, params.name, type,	\
+				 &prefix ## params.name ## _count,	\
+				 S_IRUGO);				\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define _FSG_MODULE_PARAM(prefix, params, name, type, desc)		\
+	module_param_named(prefix ## name, params.name, type,		\
+			   S_IRUGO);					\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define __FSG_MODULE_PARAMETERS(prefix, params)				\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp,		\
+				"names of backing files or devices");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool,		\
+				"true to force read-only");		\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool,	\
+				"true to simulate removable media");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool,		\
+				"true to simulate CD-ROM instead of disk"); \
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool,		\
+				"true to ignore SCSI WRITE(10,12) FUA bit"); \
+	_FSG_MODULE_PARAM(prefix, params, luns, uint,			\
+			  "number of LUNs");				\
+	_FSG_MODULE_PARAM(prefix, params, stall, bool,			\
+			  "false to prevent bulk stalls")
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#define FSG_MODULE_PARAMETERS(prefix, params)				\
+	__FSG_MODULE_PARAMETERS(prefix, params);			\
+	module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);\
+	MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers")
+#else
+
+#define FSG_MODULE_PARAMETERS(prefix, params)				\
+	__FSG_MODULE_PARAMETERS(prefix, params)
+
+#endif
+
+struct fsg_common;
+
+/* FSF callback functions */
+struct fsg_operations {
+	/*
+	 * Callback function to call when thread exits.  If no
+	 * callback is set or it returns value lower then zero MSF
+	 * will force eject all LUNs it operates on (including those
+	 * marked as non-removable or with prevent_medium_removal flag
+	 * set).
+	 */
+	int (*thread_exits)(struct fsg_common *common);
+};
+
+struct fsg_lun_opts {
+	struct config_group group;
+	struct fsg_lun *lun;
+	int lun_id;
+};
+
+struct fsg_opts {
+	struct fsg_common *common;
+	struct usb_function_instance func_inst;
+	struct fsg_lun_opts lun0;
+	struct config_group *default_groups[2];
+	bool no_configfs; /* for legacy gadgets */
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+struct fsg_lun_config {
+	const char *filename;
+	char ro;
+	char removable;
+	char cdrom;
+	char nofua;
+};
+
+struct fsg_config {
+	unsigned nluns;
+	struct fsg_lun_config luns[FSG_MAX_LUNS];
+
+	/* Callback functions. */
+	const struct fsg_operations	*ops;
+	/* Gadget's private data. */
+	void			*private_data;
+
+	const char *vendor_name;		/*  8 characters or less */
+	const char *product_name;		/* 16 characters or less */
+
+	char			can_stall;
+	unsigned int		fsg_num_buffers;
+};
+
+static inline struct fsg_opts *
+fsg_opts_from_func_inst(const struct usb_function_instance *fi)
+{
+	return container_of(fi, struct fsg_opts, func_inst);
+}
+
+void fsg_common_get(struct fsg_common *common);
+
+void fsg_common_put(struct fsg_common *common);
+
+void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs);
+
+int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n);
+
+void fsg_common_free_buffers(struct fsg_common *common);
+
+int fsg_common_set_cdev(struct fsg_common *common,
+			struct usb_composite_dev *cdev, bool can_stall);
+
+void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs);
+
+void fsg_common_remove_luns(struct fsg_common *common);
+
+void fsg_common_free_luns(struct fsg_common *common);
+
+int fsg_common_set_nluns(struct fsg_common *common, int nluns);
+
+void fsg_common_set_ops(struct fsg_common *common,
+			const struct fsg_operations *ops);
+
+int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
+			  unsigned int id, const char *name,
+			  const char **name_pfx);
+
+int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg);
+
+void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
+				   const char *pn);
+
+int fsg_common_run_thread(struct fsg_common *common);
+
+void fsg_config_from_params(struct fsg_config *cfg,
+			    const struct fsg_module_parameters *params,
+			    unsigned int fsg_num_buffers);
+
+#endif /* USB_F_MASS_STORAGE_H */
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 5327c82..2344efe 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -76,7 +76,9 @@
 
 USB_GADGET_COMPOSITE_OPTIONS();
 
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
 USB_ETHERNET_MODULE_PARAMETERS();
+#endif
 
 static struct usb_device_descriptor gfs_dev_desc = {
 	.bLength		= sizeof gfs_dev_desc,
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index c64deb9..f827680 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1165,7 +1165,7 @@
 				s = "invalid"; break;
 			default:
 				s = "?"; break;
-			}; s; }),
+			} s; }),
 			(tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
 			(tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
 			(tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
@@ -1701,7 +1701,6 @@
 	if (dev->enabled)
 		pci_disable_device(pdev);
 
-	pci_set_drvdata(pdev, NULL);
 	dev->regs = NULL;
 
 	INFO(dev, "unbind\n");
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 080e577..8e27a8c 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -37,16 +37,16 @@
 #define DRIVER_DESC		"Mass Storage Gadget"
 #define DRIVER_VERSION		"2009/09/11"
 
-/*-------------------------------------------------------------------------*/
-
 /*
- * kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ * Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
  */
-#include "f_mass_storage.c"
+#define FSG_VENDOR_ID	0x0525	/* NetChip */
+#define FSG_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
+
+#include "f_mass_storage.h"
 
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
@@ -97,11 +97,28 @@
 	NULL,
 };
 
+static struct usb_function_instance *fi_msg;
+static struct usb_function *f_msg;
+
 /****************************** Configurations ******************************/
 
 static struct fsg_module_parameters mod_data = {
 	.stall = 1
 };
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
 FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
 
 static unsigned long msg_registered;
@@ -115,13 +132,7 @@
 
 static int __init msg_do_config(struct usb_configuration *c)
 {
-	static const struct fsg_operations ops = {
-		.thread_exits = msg_thread_exits,
-	};
-	static struct fsg_common common;
-
-	struct fsg_common *retp;
-	struct fsg_config config;
+	struct fsg_opts *opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -129,15 +140,24 @@
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	fsg_config_from_params(&config, &mod_data);
-	config.ops = &ops;
+	opts = fsg_opts_from_func_inst(fi_msg);
 
-	retp = fsg_common_init(&common, c->cdev, &config);
-	if (IS_ERR(retp))
-		return PTR_ERR(retp);
+	f_msg = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg))
+		return PTR_ERR(f_msg);
 
-	ret = fsg_bind_config(c->cdev, c, &common);
-	fsg_common_put(&common);
+	ret = fsg_common_run_thread(opts->common);
+	if (ret)
+		goto put_func;
+
+	ret = usb_add_function(c, f_msg);
+	if (ret)
+		goto put_func;
+
+	return 0;
+
+put_func:
+	usb_put_function(f_msg);
 	return ret;
 }
 
@@ -152,23 +172,79 @@
 
 static int __init msg_bind(struct usb_composite_dev *cdev)
 {
+	static const struct fsg_operations ops = {
+		.thread_exits = msg_thread_exits,
+	};
+	struct fsg_opts *opts;
+	struct fsg_config config;
 	int status;
 
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg))
+		return PTR_ERR(fi_msg);
+
+	fsg_config_from_params(&config, &mod_data, fsg_num_buffers);
+	opts = fsg_opts_from_func_inst(fi_msg);
+
+	opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers);
+	if (status)
+		goto fail;
+
+	status = fsg_common_set_nluns(opts->common, config.nluns);
+	if (status)
+		goto fail_set_nluns;
+
+	fsg_common_set_ops(opts->common, &ops);
+
+	status = fsg_common_set_cdev(opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(opts->common, true);
+	status = fsg_common_create_luns(opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(opts->common, config.vendor_name,
+				      config.product_name);
+
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
-		return status;
+		goto fail_string_ids;
 	msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
 	if (status < 0)
-		return status;
+		goto fail_string_ids;
+
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&cdev->gadget->dev,
 		 DRIVER_DESC ", version: " DRIVER_VERSION "\n");
 	set_bit(0, &msg_registered);
 	return 0;
+
+fail_string_ids:
+	fsg_common_remove_luns(opts->common);
+fail_set_cdev:
+	fsg_common_free_luns(opts->common);
+fail_set_nluns:
+	fsg_common_free_buffers(opts->common);
+fail:
+	usb_put_function_instance(fi_msg);
+	return status;
 }
 
+static int msg_unbind(struct usb_composite_dev *cdev)
+{
+	if (!IS_ERR(f_msg))
+		usb_put_function(f_msg);
+
+	if (!IS_ERR(fi_msg))
+		usb_put_function_instance(fi_msg);
+
+	return 0;
+}
 
 /****************************** Some noise ******************************/
 
@@ -179,6 +255,7 @@
 	.needs_serial	= 1,
 	.strings	= dev_strings,
 	.bind		= msg_bind,
+	.unbind		= msg_unbind,
 };
 
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 2339325..4fdaa54 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -15,6 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/netdevice.h>
 
 #include "u_serial.h"
 #if defined USB_ETH_RNDIS
@@ -32,22 +33,11 @@
 MODULE_LICENSE("GPL");
 
 
-/***************************** All the files... *****************************/
+#include "f_mass_storage.h"
 
-/*
- * kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_mass_storage.c"
-
-#define USBF_ECM_INCLUDED
-#include "f_ecm.c"
+#include "u_ecm.h"
 #ifdef USB_ETH_RNDIS
-#  define USB_FRNDIS_INCLUDED
-#  include "f_rndis.c"
+#  include "u_rndis.h"
 #  include "rndis.h"
 #endif
 #include "u_ether.h"
@@ -132,22 +122,36 @@
 /****************************** Configurations ******************************/
 
 static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
 FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
 
-static struct fsg_common fsg_common;
-
-static u8 host_mac[ETH_ALEN];
-
 static struct usb_function_instance *fi_acm;
-static struct eth_dev *the_dev;
+static struct usb_function_instance *fi_msg;
 
 /********** RNDIS **********/
 
 #ifdef USB_ETH_RNDIS
+static struct usb_function_instance *fi_rndis;
 static struct usb_function *f_acm_rndis;
+static struct usb_function *f_rndis;
+static struct usb_function *f_msg_rndis;
 
 static __init int rndis_do_config(struct usb_configuration *c)
 {
+	struct fsg_opts *fsg_opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -155,27 +159,50 @@
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = rndis_bind_config(c, host_mac, the_dev);
+	f_rndis = usb_get_function(fi_rndis);
+	if (IS_ERR(f_rndis))
+		return PTR_ERR(f_rndis);
+
+	ret = usb_add_function(c, f_rndis);
 	if (ret < 0)
-		return ret;
+		goto err_func_rndis;
 
 	f_acm_rndis = usb_get_function(fi_acm);
-	if (IS_ERR(f_acm_rndis))
-		return PTR_ERR(f_acm_rndis);
+	if (IS_ERR(f_acm_rndis)) {
+		ret = PTR_ERR(f_acm_rndis);
+		goto err_func_acm;
+	}
 
 	ret = usb_add_function(c, f_acm_rndis);
 	if (ret)
 		goto err_conf;
 
-	ret = fsg_bind_config(c->cdev, c, &fsg_common);
-	if (ret < 0)
+	f_msg_rndis = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_rndis)) {
+		ret = PTR_ERR(f_msg_rndis);
 		goto err_fsg;
+	}
+
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+	ret = fsg_common_run_thread(fsg_opts->common);
+	if (ret)
+		goto err_run;
+
+	ret = usb_add_function(c, f_msg_rndis);
+	if (ret)
+		goto err_run;
 
 	return 0;
+err_run:
+	usb_put_function(f_msg_rndis);
 err_fsg:
 	usb_remove_function(c, f_acm_rndis);
 err_conf:
 	usb_put_function(f_acm_rndis);
+err_func_acm:
+	usb_remove_function(c, f_rndis);
+err_func_rndis:
+	usb_put_function(f_rndis);
 	return ret;
 }
 
@@ -205,10 +232,14 @@
 /********** CDC ECM **********/
 
 #ifdef CONFIG_USB_G_MULTI_CDC
+static struct usb_function_instance *fi_ecm;
 static struct usb_function *f_acm_multi;
+static struct usb_function *f_ecm;
+static struct usb_function *f_msg_multi;
 
 static __init int cdc_do_config(struct usb_configuration *c)
 {
+	struct fsg_opts *fsg_opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -216,28 +247,51 @@
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = ecm_bind_config(c, host_mac, the_dev);
+	f_ecm = usb_get_function(fi_ecm);
+	if (IS_ERR(f_ecm))
+		return PTR_ERR(f_ecm);
+
+	ret = usb_add_function(c, f_ecm);
 	if (ret < 0)
-		return ret;
+		goto err_func_ecm;
 
 	/* implicit port_num is zero */
 	f_acm_multi = usb_get_function(fi_acm);
-	if (IS_ERR(f_acm_multi))
-		return PTR_ERR(f_acm_multi);
+	if (IS_ERR(f_acm_multi)) {
+		ret = PTR_ERR(f_acm_multi);
+		goto err_func_acm;
+	}
 
 	ret = usb_add_function(c, f_acm_multi);
 	if (ret)
 		goto err_conf;
 
-	ret = fsg_bind_config(c->cdev, c, &fsg_common);
-	if (ret < 0)
+	f_msg_multi = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_multi)) {
+		ret = PTR_ERR(f_msg_multi);
 		goto err_fsg;
+	}
+
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+	ret = fsg_common_run_thread(fsg_opts->common);
+	if (ret)
+		goto err_run;
+
+	ret = usb_add_function(c, f_msg_multi);
+	if (ret)
+		goto err_run;
 
 	return 0;
+err_run:
+	usb_put_function(f_msg_multi);
 err_fsg:
 	usb_remove_function(c, f_acm_multi);
 err_conf:
 	usb_put_function(f_acm_multi);
+err_func_acm:
+	usb_remove_function(c, f_ecm);
+err_func_ecm:
+	usb_put_function(f_ecm);
 	return ret;
 }
 
@@ -270,19 +324,67 @@
 static int __ref multi_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
+#ifdef CONFIG_USB_G_MULTI_CDC
+	struct f_ecm_opts *ecm_opts;
+#endif
+#ifdef USB_ETH_RNDIS
+	struct f_rndis_opts *rndis_opts;
+#endif
+	struct fsg_opts *fsg_opts;
+	struct fsg_config config;
 	int status;
 
 	if (!can_support_ecm(cdev->gadget)) {
 		dev_err(&gadget->dev, "controller '%s' not usable\n",
-		        gadget->name);
+			gadget->name);
 		return -EINVAL;
 	}
 
-	/* set up network link layer */
-	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
-			       qmult);
-	if (IS_ERR(the_dev))
-		return PTR_ERR(the_dev);
+#ifdef CONFIG_USB_G_MULTI_CDC
+	fi_ecm = usb_get_function_instance("ecm");
+	if (IS_ERR(fi_ecm))
+		return PTR_ERR(fi_ecm);
+
+	ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+	gether_set_qmult(ecm_opts->net, qmult);
+	if (!gether_set_host_addr(ecm_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(ecm_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#ifdef USB_ETH_RNDIS
+	fi_rndis = usb_get_function_instance("rndis");
+	if (IS_ERR(fi_rndis)) {
+		status = PTR_ERR(fi_rndis);
+		goto fail;
+	}
+
+	rndis_opts = container_of(fi_rndis, struct f_rndis_opts, func_inst);
+
+	gether_set_qmult(rndis_opts->net, qmult);
+	if (!gether_set_host_addr(rndis_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(rndis_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#if (defined CONFIG_USB_G_MULTI_CDC && defined USB_ETH_RNDIS)
+	/*
+	 * If both ecm and rndis are selected then:
+	 *	1) rndis borrows the net interface from ecm
+	 *	2) since the interface is shared it must not be bound
+	 *	twice - in ecm's _and_ rndis' binds, so do it here.
+	 */
+	gether_set_gadget(ecm_opts->net, cdev->gadget);
+	status = gether_register_netdev(ecm_opts->net);
+	if (status)
+		goto fail0;
+
+	rndis_borrow_net(fi_rndis, ecm_opts->net);
+	ecm_opts->bound = true;
+#endif
 
 	/* set up serial link layer */
 	fi_acm = usb_get_function_instance("acm");
@@ -292,57 +394,102 @@
 	}
 
 	/* set up mass storage function */
-	{
-		void *retp;
-		retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
-		if (IS_ERR(retp)) {
-			status = PTR_ERR(retp);
-			goto fail1;
-		}
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto fail1;
 	}
+	fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers);
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+
+	fsg_opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(fsg_opts->common, fsg_num_buffers);
+	if (status)
+		goto fail2;
+
+	status = fsg_common_set_nluns(fsg_opts->common, config.nluns);
+	if (status)
+		goto fail_set_nluns;
+
+	status = fsg_common_set_cdev(fsg_opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(fsg_opts->common, true);
+	status = fsg_common_create_luns(fsg_opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(fsg_opts->common, config.vendor_name,
+				      config.product_name);
 
 	/* allocate string IDs */
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (unlikely(status < 0))
-		goto fail2;
+		goto fail_string_ids;
 	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register configurations */
 	status = rndis_config_register(cdev);
 	if (unlikely(status < 0))
-		goto fail2;
+		goto fail_string_ids;
 
 	status = cdc_config_register(cdev);
 	if (unlikely(status < 0))
-		goto fail2;
+		goto fail_string_ids;
 	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	/* we're done */
 	dev_info(&gadget->dev, DRIVER_DESC "\n");
-	fsg_common_put(&fsg_common);
 	return 0;
 
 
 	/* error recovery */
+fail_string_ids:
+	fsg_common_remove_luns(fsg_opts->common);
+fail_set_cdev:
+	fsg_common_free_luns(fsg_opts->common);
+fail_set_nluns:
+	fsg_common_free_buffers(fsg_opts->common);
 fail2:
-	fsg_common_put(&fsg_common);
+	usb_put_function_instance(fi_msg);
 fail1:
 	usb_put_function_instance(fi_acm);
 fail0:
-	gether_cleanup(the_dev);
+#ifdef USB_ETH_RNDIS
+	usb_put_function_instance(fi_rndis);
+fail:
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function_instance(fi_ecm);
+#endif
 	return status;
 }
 
 static int __exit multi_unbind(struct usb_composite_dev *cdev)
 {
 #ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_msg_multi);
+#endif
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_msg_rndis);
+#endif
+	usb_put_function_instance(fi_msg);
+#ifdef CONFIG_USB_G_MULTI_CDC
 	usb_put_function(f_acm_multi);
 #endif
 #ifdef USB_ETH_RNDIS
 	usb_put_function(f_acm_rndis);
 #endif
 	usb_put_function_instance(fi_acm);
-	gether_cleanup(the_dev);
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_rndis);
+	usb_put_function_instance(fi_rndis);
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_ecm);
+	usb_put_function_instance(fi_ecm);
+#endif
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index 561b30e..234711e 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -310,6 +310,7 @@
 	 */
 	trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
 	if (!trb_hw) {
+		kfree(trb);
 		dev_err(u3d->dev,
 			"%s, dma_pool_alloc fail\n", __func__);
 		return NULL;
@@ -454,6 +455,7 @@
 
 		trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
 		if (!trb_hw) {
+			kfree(trb);
 			dev_err(u3d->dev,
 					"%s, trb_hw alloc fail\n", __func__);
 			return -ENOMEM;
@@ -1936,7 +1938,7 @@
 	}
 	u3d->irq = r->start;
 	if (request_irq(u3d->irq, mv_u3d_irq,
-		IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) {
+		IRQF_SHARED, driver_name, u3d)) {
 		u3d->irq = 0;
 		dev_err(&dev->dev, "Request irq %d for u3d failed\n",
 			u3d->irq);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 0781bff..fc85217 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -129,7 +129,7 @@
 	case USB_ENDPOINT_XFER_BULK:	return "bulk";
 	case USB_ENDPOINT_XFER_ISOC:	return "iso";
 	case USB_ENDPOINT_XFER_INT:	return "intr";
-	};
+	}
 	return "control";
 }
 #endif
@@ -1630,7 +1630,7 @@
 					val = "intr"; break;
 				 default:
 					val = "iso"; break;
-				 }; val; }),
+				 } val; }),
 				usb_endpoint_maxp (d) & 0x1fff,
 				ep->dma ? "dma" : "pio", ep->fifo_size
 				);
@@ -2680,7 +2680,6 @@
 	if (dev->enabled)
 		pci_disable_device (pdev);
 	device_remove_file (&pdev->dev, &dev_attr_registers);
-	pci_set_drvdata (pdev, NULL);
 
 	INFO (dev, "unbind\n");
 }
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 24174e1..32d5e92 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -3080,7 +3080,6 @@
 	if (dev->active)
 		pci_disable_device(pdev);
 	kfree(dev);
-	pci_set_drvdata(pdev, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 9575085..a3ad732 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1068,7 +1068,7 @@
 				s = "RNDIS_INITIALIZED"; break;
 			 case RNDIS_DATA_INITIALIZED:
 				s = "RNDIS_DATA_INITIALIZED"; break;
-			}; s; }),
+			} s; }),
 			 param->medium,
 			 (param->media_state) ? 0 : param->speed*100,
 			 (param->media_state) ? "disconnected" : "connected",
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a8a99e4..9875d9c 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -83,9 +83,12 @@
  * @dir_in: Set to true if this endpoint is of the IN direction, which
  *	    means that it is sending data to the Host.
  * @index: The index for the endpoint registers.
+ * @mc: Multi Count - number of transactions per microframe
+ * @interval - Interval for periodic endpoints
  * @name: The name array passed to the USB core.
  * @halted: Set if the endpoint has been halted.
  * @periodic: Set if this is a periodic ep, such as Interrupt
+ * @isochronous: Set if this is a isochronous ep
  * @sent_zlp: Set if we've sent a zero-length packet.
  * @total_data: The total number of data bytes done.
  * @fifo_size: The size of the FIFO (for periodic IN endpoints)
@@ -121,9 +124,12 @@
 
 	unsigned char		dir_in;
 	unsigned char		index;
+	unsigned char		mc;
+	unsigned char		interval;
 
 	unsigned int		halted:1;
 	unsigned int		periodic:1;
+	unsigned int		isochronous:1;
 	unsigned int		sent_zlp:1;
 
 	char			name[10];
@@ -468,6 +474,7 @@
 	void *data;
 	int can_write;
 	int pkt_round;
+	int max_transfer;
 
 	to_write -= (buf_pos - hs_ep->last_load);
 
@@ -535,8 +542,10 @@
 		can_write *= 4;	/* fifo size is in 32bit quantities. */
 	}
 
-	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
-		 __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
+	max_transfer = hs_ep->ep.maxpacket * hs_ep->mc;
+
+	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n",
+		 __func__, gnptxsts, can_write, to_write, max_transfer);
 
 	/*
 	 * limit to 512 bytes of data, it seems at least on the non-periodic
@@ -551,19 +560,21 @@
 	 * the transfer to return that it did not run out of fifo space
 	 * doing it.
 	 */
-	if (to_write > hs_ep->ep.maxpacket) {
-		to_write = hs_ep->ep.maxpacket;
+	if (to_write > max_transfer) {
+		to_write = max_transfer;
 
-		s3c_hsotg_en_gsint(hsotg,
-				   periodic ? GINTSTS_PTxFEmp :
-				   GINTSTS_NPTxFEmp);
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			s3c_hsotg_en_gsint(hsotg,
+					   periodic ? GINTSTS_PTxFEmp :
+					   GINTSTS_NPTxFEmp);
 	}
 
 	/* see if we can write data */
 
 	if (to_write > can_write) {
 		to_write = can_write;
-		pkt_round = to_write % hs_ep->ep.maxpacket;
+		pkt_round = to_write % max_transfer;
 
 		/*
 		 * Round the write down to an
@@ -581,9 +592,11 @@
 		 * is more room left.
 		 */
 
-		s3c_hsotg_en_gsint(hsotg,
-				   periodic ? GINTSTS_PTxFEmp :
-				   GINTSTS_NPTxFEmp);
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			s3c_hsotg_en_gsint(hsotg,
+					   periodic ? GINTSTS_PTxFEmp :
+					   GINTSTS_NPTxFEmp);
 	}
 
 	dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
@@ -727,8 +740,16 @@
 	else
 		packets = 1;	/* send one packet if length is zero. */
 
+	if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
+		dev_err(hsotg->dev, "req length > maxpacket*mc\n");
+		return;
+	}
+
 	if (dir_in && index != 0)
-		epsize = DxEPTSIZ_MC(1);
+		if (hs_ep->isochronous)
+			epsize = DxEPTSIZ_MC(packets);
+		else
+			epsize = DxEPTSIZ_MC(1);
 	else
 		epsize = 0;
 
@@ -820,6 +841,9 @@
 
 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
 		__func__, readl(hsotg->regs + epctrl_reg));
+
+	/* enable ep interrupts */
+	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
 }
 
 /**
@@ -1091,6 +1115,7 @@
 	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
 	struct s3c_hsotg_ep *ep;
 	int ret;
+	bool halted;
 
 	dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
 		__func__, set ? "SET" : "CLEAR");
@@ -1105,6 +1130,8 @@
 
 		switch (le16_to_cpu(ctrl->wValue)) {
 		case USB_ENDPOINT_HALT:
+			halted = ep->halted;
+
 			s3c_hsotg_ep_sethalt(&ep->ep, set);
 
 			ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
@@ -1114,7 +1141,12 @@
 				return ret;
 			}
 
-			if (!set) {
+			/*
+			 * we have to complete all requests for ep if it was
+			 * halted, and the halt was cleared by CLEAR_FEATURE
+			 */
+
+			if (!set && halted) {
 				/*
 				 * If we have request in progress,
 				 * then complete it
@@ -1147,6 +1179,8 @@
 	return 1;
 }
 
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
+
 /**
  * s3c_hsotg_process_control - process a control request
  * @hsotg: The device state
@@ -1246,11 +1280,15 @@
 		 * don't believe we need to anything more to get the EP
 		 * to reply with a STALL packet
 		 */
+
+		 /*
+		  * complete won't be called, so we enqueue
+		  * setup request here
+		  */
+		 s3c_hsotg_enqueue_setup(hsotg);
 	}
 }
 
-static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
-
 /**
  * s3c_hsotg_complete_setup - completion of a setup transfer
  * @ep: The endpoint the request was on.
@@ -1698,6 +1736,7 @@
 	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
 	void __iomem *regs = hsotg->regs;
 	u32 mpsval;
+	u32 mcval;
 	u32 reg;
 
 	if (ep == 0) {
@@ -1705,15 +1744,19 @@
 		mpsval = s3c_hsotg_ep0_mps(mps);
 		if (mpsval > 3)
 			goto bad_mps;
+		hs_ep->ep.maxpacket = mps;
+		hs_ep->mc = 1;
 	} else {
-		if (mps >= DxEPCTL_MPS_LIMIT+1)
+		mpsval = mps & DxEPCTL_MPS_MASK;
+		if (mpsval > 1024)
 			goto bad_mps;
-
-		mpsval = mps;
+		mcval = ((mps >> 11) & 0x3) + 1;
+		hs_ep->mc = mcval;
+		if (mcval > 3)
+			goto bad_mps;
+		hs_ep->ep.maxpacket = mpsval;
 	}
 
-	hs_ep->ep.maxpacket = mps;
-
 	/*
 	 * update both the in and out endpoint controldir_ registers, even
 	 * if one of the directions may not be in use.
@@ -1782,8 +1825,16 @@
 {
 	struct s3c_hsotg_req *hs_req = hs_ep->req;
 
-	if (!hs_ep->dir_in || !hs_req)
+	if (!hs_ep->dir_in || !hs_req) {
+		/**
+		 * if request is not enqueued, we disable interrupts
+		 * for endpoints, excepting ep0
+		 */
+		if (hs_ep->index != 0)
+			s3c_hsotg_ctrl_epint(hsotg, hs_ep->index,
+					     hs_ep->dir_in, 0);
 		return 0;
+	}
 
 	if (hs_req->req.actual < hs_req->req.length) {
 		dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
@@ -1887,8 +1938,10 @@
 	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
 	u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
 	u32 ints;
+	u32 ctrl;
 
 	ints = readl(hsotg->regs + epint_reg);
+	ctrl = readl(hsotg->regs + epctl_reg);
 
 	/* Clear endpoint interrupts */
 	writel(ints, hsotg->regs + epint_reg);
@@ -1897,6 +1950,14 @@
 		__func__, idx, dir_in ? "in" : "out", ints);
 
 	if (ints & DxEPINT_XferCompl) {
+		if (hs_ep->isochronous && hs_ep->interval == 1) {
+			if (ctrl & DxEPCTL_EOFrNum)
+				ctrl |= DxEPCTL_SetEvenFr;
+			else
+				ctrl |= DxEPCTL_SetOddFr;
+			writel(ctrl, hsotg->regs + epctl_reg);
+		}
+
 		dev_dbg(hsotg->dev,
 			"%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
 			__func__, readl(hsotg->regs + epctl_reg),
@@ -1963,7 +2024,7 @@
 	if (ints & DxEPINT_Back2BackSetup)
 		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
 
-	if (dir_in) {
+	if (dir_in && !hs_ep->isochronous) {
 		/* not sure if this is important, but we'll clear it anyway */
 		if (ints & DIEPMSK_INTknTXFEmpMsk) {
 			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
@@ -2092,12 +2153,14 @@
 }
 
 #define call_gadget(_hs, _entry) \
+do { \
 	if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN &&	\
 	    (_hs)->driver && (_hs)->driver->_entry) { \
 		spin_unlock(&_hs->lock); \
 		(_hs)->driver->_entry(&(_hs)->gadget); \
 		spin_lock(&_hs->lock); \
-		}
+	} \
+} while (0)
 
 /**
  * s3c_hsotg_disconnect - disconnect service
@@ -2241,15 +2304,19 @@
 		       GAHBCFG_HBstLen_Incr4,
 		       hsotg->regs + GAHBCFG);
 	else
-		writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG);
+		writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NPTxFEmpLvl |
+						    GAHBCFG_PTxFEmpLvl) : 0) |
+		       GAHBCFG_GlblIntrEn,
+		       hsotg->regs + GAHBCFG);
 
 	/*
-	 * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
-	 * up being flooded with interrupts if the host is polling the
-	 * endpoint to try and read data.
+	 * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts
+	 * when we have no data to transfer. Otherwise we get being flooded by
+	 * interrupts.
 	 */
 
-	writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) |
+	writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty |
+	       DIEPMSK_INTknTXFEmpMsk : 0) |
 	       DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk |
 	       DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk |
 	       DIEPMSK_INTknEPMisMsk,
@@ -2378,10 +2445,14 @@
 
 	if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) {
 		u32 daint = readl(hsotg->regs + DAINT);
-		u32 daint_out = daint >> DAINT_OutEP_SHIFT;
-		u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT);
+		u32 daintmsk = readl(hsotg->regs + DAINTMSK);
+		u32 daint_out, daint_in;
 		int ep;
 
+		daint &= daintmsk;
+		daint_out = daint >> DAINT_OutEP_SHIFT;
+		daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT);
+
 		dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
 
 		for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
@@ -2577,16 +2648,25 @@
 	epctrl |= DxEPCTL_SNAK;
 
 	/* update the endpoint state */
-	hs_ep->ep.maxpacket = mps;
+	s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps);
 
 	/* default, set to non-periodic */
+	hs_ep->isochronous = 0;
 	hs_ep->periodic = 0;
+	hs_ep->halted = 0;
+	hs_ep->interval = desc->bInterval;
+
+	if (hs_ep->interval > 1 && hs_ep->mc > 1)
+		dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
 
 	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 	case USB_ENDPOINT_XFER_ISOC:
-		dev_err(hsotg->dev, "no current ISOC support\n");
-		ret = -EINVAL;
-		goto out;
+		epctrl |= DxEPCTL_EPType_Iso;
+		epctrl |= DxEPCTL_SetEvenFr;
+		hs_ep->isochronous = 1;
+		if (dir_in)
+			hs_ep->periodic = 1;
+		break;
 
 	case USB_ENDPOINT_XFER_BULK:
 		epctrl |= DxEPCTL_EPType_Bulk;
@@ -2634,7 +2714,6 @@
 	/* enable the endpoint interrupt */
 	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
 
-out:
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return ret;
 }
@@ -2776,6 +2855,8 @@
 
 	writel(epctl, hs->regs + epreg);
 
+	hs_ep->halted = value;
+
 	return 0;
 }
 
@@ -2903,7 +2984,7 @@
 	int ret;
 
 	if (!hsotg) {
-		printk(KERN_ERR "%s: called with no device\n", __func__);
+		pr_err("%s: called with no device\n", __func__);
 		return -ENODEV;
 	}
 
@@ -3066,7 +3147,7 @@
 
 	hs_ep->parent = hsotg;
 	hs_ep->ep.name = hs_ep->name;
-	hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
+	hs_ep->ep.maxpacket = epnum ? 1024 : EP0_MPS_LIMIT;
 	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
 	/*
@@ -3200,7 +3281,7 @@
 		   readl(regs + GNPTXSTS),
 		   readl(regs + GRXSTSR));
 
-	seq_printf(seq, "\nEndpoint status:\n");
+	seq_puts(seq, "\nEndpoint status:\n");
 
 	for (idx = 0; idx < 15; idx++) {
 		u32 in, out;
@@ -3217,7 +3298,7 @@
 		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
 			   in, out);
 
-		seq_printf(seq, "\n");
+		seq_puts(seq, "\n");
 	}
 
 	return 0;
@@ -3251,7 +3332,7 @@
 	u32 val;
 	int idx;
 
-	seq_printf(seq, "Non-periodic FIFOs:\n");
+	seq_puts(seq, "Non-periodic FIFOs:\n");
 	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
 
 	val = readl(regs + GNPTXFSIZ);
@@ -3259,7 +3340,7 @@
 		   val >> GNPTXFSIZ_NPTxFDep_SHIFT,
 		   val & GNPTXFSIZ_NPTxFStAddr_MASK);
 
-	seq_printf(seq, "\nPeriodic TXFIFOs:\n");
+	seq_puts(seq, "\nPeriodic TXFIFOs:\n");
 
 	for (idx = 1; idx <= 15; idx++) {
 		val = readl(regs + DPTXFSIZn(idx));
@@ -3330,7 +3411,7 @@
 		   readl(regs + DIEPTSIZ(index)),
 		   readl(regs + DOEPTSIZ(index)));
 
-	seq_printf(seq, "\n");
+	seq_puts(seq, "\n");
 	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
 	seq_printf(seq, "total_data=%ld\n", ep->total_data);
 
@@ -3341,7 +3422,7 @@
 
 	list_for_each_entry(req, &ep->queue, queue) {
 		if (--show_limit < 0) {
-			seq_printf(seq, "not showing more requests...\n");
+			seq_puts(seq, "not showing more requests...\n");
 			break;
 		}
 
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 08a1a32..ec20a1f 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -23,242 +23,17 @@
  * The valid range of num_buffers is: num >= 2 && num <= 4.
  */
 
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/usb/composite.h>
 
-#include <linux/usb/storage.h>
-#include <scsi/scsi.h>
-#include <asm/unaligned.h>
-
-
-/*
- * Thanks to NetChip Technologies for donating this product ID.
- *
- * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
- * Instead:  allocate your own, using normal USB-IF procedures.
- */
-#define FSG_VENDOR_ID	0x0525	/* NetChip */
-#define FSG_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-#ifndef DEBUG
-#undef VERBOSE_DEBUG
-#undef DUMP_MSGS
-#endif /* !DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#define VLDBG	LDBG
-#else
-#define VLDBG(lun, fmt, args...) do { } while (0)
-#endif /* VERBOSE_DEBUG */
-
-#define LDBG(lun, fmt, args...)   dev_dbg (&(lun)->dev, fmt, ## args)
-#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args)
-#define LWARN(lun, fmt, args...)  dev_warn(&(lun)->dev, fmt, ## args)
-#define LINFO(lun, fmt, args...)  dev_info(&(lun)->dev, fmt, ## args)
-
-
-#ifdef DUMP_MSGS
-
-#  define dump_msg(fsg, /* const char * */ label,			\
-		   /* const u8 * */ buf, /* unsigned */ length) do {	\
-	if (length < 512) {						\
-		DBG(fsg, "%s, length %u:\n", label, length);		\
-		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,	\
-			       16, 1, buf, length, 0);			\
-	}								\
-} while (0)
-
-#  define dump_cdb(fsg) do { } while (0)
-
-#else
-
-#  define dump_msg(fsg, /* const char * */ label, \
-		   /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
-
-#  ifdef VERBOSE_DEBUG
-
-#    define dump_cdb(fsg)						\
-	print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,	\
-		       16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0)		\
-
-#  else
-
-#    define dump_cdb(fsg) do { } while (0)
-
-#  endif /* VERBOSE_DEBUG */
-
-#endif /* DUMP_MSGS */
-
-/*-------------------------------------------------------------------------*/
-
-/* Length of a SCSI Command Data Block */
-#define MAX_COMMAND_SIZE	16
-
-/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
-#define SS_NO_SENSE				0
-#define SS_COMMUNICATION_FAILURE		0x040800
-#define SS_INVALID_COMMAND			0x052000
-#define SS_INVALID_FIELD_IN_CDB			0x052400
-#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE	0x052100
-#define SS_LOGICAL_UNIT_NOT_SUPPORTED		0x052500
-#define SS_MEDIUM_NOT_PRESENT			0x023a00
-#define SS_MEDIUM_REMOVAL_PREVENTED		0x055302
-#define SS_NOT_READY_TO_READY_TRANSITION	0x062800
-#define SS_RESET_OCCURRED			0x062900
-#define SS_SAVING_PARAMETERS_NOT_SUPPORTED	0x053900
-#define SS_UNRECOVERED_READ_ERROR		0x031100
-#define SS_WRITE_ERROR				0x030c02
-#define SS_WRITE_PROTECTED			0x072700
-
-#define SK(x)		((u8) ((x) >> 16))	/* Sense Key byte, etc. */
-#define ASC(x)		((u8) ((x) >> 8))
-#define ASCQ(x)		((u8) (x))
-
-
-/*-------------------------------------------------------------------------*/
-
-
-struct fsg_lun {
-	struct file	*filp;
-	loff_t		file_length;
-	loff_t		num_sectors;
-
-	unsigned int	initially_ro:1;
-	unsigned int	ro:1;
-	unsigned int	removable:1;
-	unsigned int	cdrom:1;
-	unsigned int	prevent_medium_removal:1;
-	unsigned int	registered:1;
-	unsigned int	info_valid:1;
-	unsigned int	nofua:1;
-
-	u32		sense_data;
-	u32		sense_data_info;
-	u32		unit_attention_data;
-
-	unsigned int	blkbits;	/* Bits of logical block size of bound block device */
-	unsigned int	blksize;	/* logical block size of bound block device */
-	struct device	dev;
-};
-
-static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
-{
-	return curlun->filp != NULL;
-}
-
-static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
-{
-	return container_of(dev, struct fsg_lun, dev);
-}
-
-
-/* Big enough to hold our biggest descriptor */
-#define EP0_BUFSIZE	256
-#define DELAYED_STATUS	(EP0_BUFSIZE + 999)	/* An impossibly large value */
-
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-
-static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
-module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);
-MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers");
-
-#else
-
-/*
- * Number of buffers we will use.
- * 2 is usually enough for good buffering pipeline
- */
-#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
-
-#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
-
-/* check if fsg_num_buffers is within a valid range */
-static inline int fsg_num_buffers_validate(void)
-{
-	if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
-		return 0;
-	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
-	       fsg_num_buffers, 2 ,4);
-	return -EINVAL;
-}
-
-/* Default size of buffer length. */
-#define FSG_BUFLEN	((u32)16384)
-
-/* Maximal number of LUNs supported in mass storage function */
-#define FSG_MAX_LUNS	8
-
-enum fsg_buffer_state {
-	BUF_STATE_EMPTY = 0,
-	BUF_STATE_FULL,
-	BUF_STATE_BUSY
-};
-
-struct fsg_buffhd {
-	void				*buf;
-	enum fsg_buffer_state		state;
-	struct fsg_buffhd		*next;
-
-	/*
-	 * The NetChip 2280 is faster, and handles some protocol faults
-	 * better, if we don't submit any short bulk-out read requests.
-	 * So we will record the intended request length here.
-	 */
-	unsigned int			bulk_out_intended_length;
-
-	struct usb_request		*inreq;
-	int				inreq_busy;
-	struct usb_request		*outreq;
-	int				outreq_busy;
-};
-
-enum fsg_state {
-	/* This one isn't used anywhere */
-	FSG_STATE_COMMAND_PHASE = -10,
-	FSG_STATE_DATA_PHASE,
-	FSG_STATE_STATUS_PHASE,
-
-	FSG_STATE_IDLE = 0,
-	FSG_STATE_ABORT_BULK_OUT,
-	FSG_STATE_RESET,
-	FSG_STATE_INTERFACE_CHANGE,
-	FSG_STATE_CONFIG_CHANGE,
-	FSG_STATE_DISCONNECT,
-	FSG_STATE_EXIT,
-	FSG_STATE_TERMINATED
-};
-
-enum data_direction {
-	DATA_DIR_UNKNOWN = 0,
-	DATA_DIR_FROM_HOST,
-	DATA_DIR_TO_HOST,
-	DATA_DIR_NONE
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-
-static inline u32 get_unaligned_be24(u8 *buf)
-{
-	return 0xffffff & (u32) get_unaligned_be32(buf - 1);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-
-enum {
-	FSG_STRING_INTERFACE
-};
-
+#include "storage_common.h"
 
 /* There is only one interface. */
 
-static struct usb_interface_descriptor
-fsg_intf_desc = {
+struct usb_interface_descriptor fsg_intf_desc = {
 	.bLength =		sizeof fsg_intf_desc,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -268,14 +43,14 @@
 	.bInterfaceProtocol =	USB_PR_BULK,	/* Adjusted during fsg_bind() */
 	.iInterface =		FSG_STRING_INTERFACE,
 };
+EXPORT_SYMBOL(fsg_intf_desc);
 
 /*
  * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
  * interrupt-in.
  */
 
-static struct usb_endpoint_descriptor
-fsg_fs_bulk_in_desc = {
+struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -283,9 +58,9 @@
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	/* wMaxPacketSize set by autoconfiguration */
 };
+EXPORT_SYMBOL(fsg_fs_bulk_in_desc);
 
-static struct usb_endpoint_descriptor
-fsg_fs_bulk_out_desc = {
+struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -293,13 +68,15 @@
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	/* wMaxPacketSize set by autoconfiguration */
 };
+EXPORT_SYMBOL(fsg_fs_bulk_out_desc);
 
-static struct usb_descriptor_header *fsg_fs_function[] = {
+struct usb_descriptor_header *fsg_fs_function[] = {
 	(struct usb_descriptor_header *) &fsg_intf_desc,
 	(struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
 	(struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
 	NULL,
 };
+EXPORT_SYMBOL(fsg_fs_function);
 
 
 /*
@@ -310,8 +87,7 @@
  * and a "device qualifier" ... plus more construction options
  * for the configuration descriptor.
  */
-static struct usb_endpoint_descriptor
-fsg_hs_bulk_in_desc = {
+struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -319,9 +95,9 @@
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
+EXPORT_SYMBOL(fsg_hs_bulk_in_desc);
 
-static struct usb_endpoint_descriptor
-fsg_hs_bulk_out_desc = {
+struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -330,17 +106,18 @@
 	.wMaxPacketSize =	cpu_to_le16(512),
 	.bInterval =		1,	/* NAK every 1 uframe */
 };
+EXPORT_SYMBOL(fsg_hs_bulk_out_desc);
 
 
-static struct usb_descriptor_header *fsg_hs_function[] = {
+struct usb_descriptor_header *fsg_hs_function[] = {
 	(struct usb_descriptor_header *) &fsg_intf_desc,
 	(struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
 	(struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
 	NULL,
 };
+EXPORT_SYMBOL(fsg_hs_function);
 
-static struct usb_endpoint_descriptor
-fsg_ss_bulk_in_desc = {
+struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -348,16 +125,17 @@
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };
+EXPORT_SYMBOL(fsg_ss_bulk_in_desc);
 
-static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
+struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
 	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 
 	/*.bMaxBurst =		DYNAMIC, */
 };
+EXPORT_SYMBOL(fsg_ss_bulk_in_comp_desc);
 
-static struct usb_endpoint_descriptor
-fsg_ss_bulk_out_desc = {
+struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -365,15 +143,17 @@
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };
+EXPORT_SYMBOL(fsg_ss_bulk_out_desc);
 
-static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
+struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
 	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 
 	/*.bMaxBurst =		DYNAMIC, */
 };
+EXPORT_SYMBOL(fsg_ss_bulk_out_comp_desc);
 
-static struct usb_descriptor_header *fsg_ss_function[] = {
+struct usb_descriptor_header *fsg_ss_function[] = {
 	(struct usb_descriptor_header *) &fsg_intf_desc,
 	(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
 	(struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
@@ -381,17 +161,7 @@
 	(struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
 	NULL,
 };
-
-/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
-static struct usb_string		fsg_strings[] = {
-	{FSG_STRING_INTERFACE,		fsg_string_interface},
-	{}
-};
-
-static struct usb_gadget_strings	fsg_stringtab = {
-	.language	= 0x0409,		/* en-us */
-	.strings	= fsg_strings,
-};
+EXPORT_SYMBOL(fsg_ss_function);
 
 
  /*-------------------------------------------------------------------------*/
@@ -401,7 +171,7 @@
  * the caller must own fsg->filesem for writing.
  */
 
-static void fsg_lun_close(struct fsg_lun *curlun)
+void fsg_lun_close(struct fsg_lun *curlun)
 {
 	if (curlun->filp) {
 		LDBG(curlun, "close backing file\n");
@@ -409,9 +179,9 @@
 		curlun->filp = NULL;
 	}
 }
+EXPORT_SYMBOL(fsg_lun_close);
 
-
-static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
+int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 {
 	int				ro;
 	struct file			*filp = NULL;
@@ -508,6 +278,7 @@
 	fput(filp);
 	return rc;
 }
+EXPORT_SYMBOL(fsg_lun_open);
 
 
 /*-------------------------------------------------------------------------*/
@@ -516,7 +287,7 @@
  * Sync the file data, don't bother with the metadata.
  * This code was copied from fs/buffer.c:sys_fdatasync().
  */
-static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
+int fsg_lun_fsync_sub(struct fsg_lun *curlun)
 {
 	struct file	*filp = curlun->filp;
 
@@ -524,8 +295,9 @@
 		return 0;
 	return vfs_fsync(filp, 1);
 }
+EXPORT_SYMBOL(fsg_lun_fsync_sub);
 
-static void store_cdrom_address(u8 *dest, int msf, u32 addr)
+void store_cdrom_address(u8 *dest, int msf, u32 addr)
 {
 	if (msf) {
 		/* Convert to Minutes-Seconds-Frames */
@@ -542,34 +314,28 @@
 		put_unaligned_be32(addr, dest);
 	}
 }
-
+EXPORT_SYMBOL(store_cdrom_address);
 
 /*-------------------------------------------------------------------------*/
 
 
-static ssize_t ro_show(struct device *dev, struct device_attribute *attr,
-		       char *buf)
+ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-
 	return sprintf(buf, "%d\n", fsg_lun_is_open(curlun)
 				  ? curlun->ro
 				  : curlun->initially_ro);
 }
+EXPORT_SYMBOL(fsg_show_ro);
 
-static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
+ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-
 	return sprintf(buf, "%u\n", curlun->nofua);
 }
+EXPORT_SYMBOL(fsg_show_nofua);
 
-static ssize_t file_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
+ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		      char *buf)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
 	char		*p;
 	ssize_t		rc;
 
@@ -591,17 +357,44 @@
 	up_read(filesem);
 	return rc;
 }
+EXPORT_SYMBOL(fsg_show_file);
 
+ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%u\n", curlun->cdrom);
+}
+EXPORT_SYMBOL(fsg_show_cdrom);
 
-static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%u\n", curlun->removable);
+}
+EXPORT_SYMBOL(fsg_show_removable);
+
+/*
+ * The caller must hold fsg->filesem for reading when calling this function.
+ */
+static ssize_t _fsg_store_ro(struct fsg_lun *curlun, bool ro)
+{
+	if (fsg_lun_is_open(curlun)) {
+		LDBG(curlun, "read-only status change prevented\n");
+		return -EBUSY;
+	}
+
+	curlun->ro = ro;
+	curlun->initially_ro = ro;
+	LDBG(curlun, "read-only status set to %d\n", curlun->ro);
+
+	return 0;
+}
+
+ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		     const char *buf, size_t count)
 {
 	ssize_t		rc;
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
-	unsigned	ro;
+	bool		ro;
 
-	rc = kstrtouint(buf, 2, &ro);
+	rc = strtobool(buf, &ro);
 	if (rc)
 		return rc;
 
@@ -610,27 +403,21 @@
 	 * backing file is closed.
 	 */
 	down_read(filesem);
-	if (fsg_lun_is_open(curlun)) {
-		LDBG(curlun, "read-only status change prevented\n");
-		rc = -EBUSY;
-	} else {
-		curlun->ro = ro;
-		curlun->initially_ro = ro;
-		LDBG(curlun, "read-only status set to %d\n", curlun->ro);
+	rc = _fsg_store_ro(curlun, ro);
+	if (!rc)
 		rc = count;
-	}
 	up_read(filesem);
+
 	return rc;
 }
+EXPORT_SYMBOL(fsg_store_ro);
 
-static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
+ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	unsigned	nofua;
+	bool		nofua;
 	int		ret;
 
-	ret = kstrtouint(buf, 2, &nofua);
+	ret = strtobool(buf, &nofua);
 	if (ret)
 		return ret;
 
@@ -642,12 +429,11 @@
 
 	return count;
 }
+EXPORT_SYMBOL(fsg_store_nofua);
 
-static ssize_t file_store(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t count)
+ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		       const char *buf, size_t count)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
 	int		rc = 0;
 
 	if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) {
@@ -674,3 +460,45 @@
 	up_write(filesem);
 	return (rc < 0 ? rc : count);
 }
+EXPORT_SYMBOL(fsg_store_file);
+
+ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			const char *buf, size_t count)
+{
+	bool		cdrom;
+	int		ret;
+
+	ret = strtobool(buf, &cdrom);
+	if (ret)
+		return ret;
+
+	down_read(filesem);
+	ret = cdrom ? _fsg_store_ro(curlun, true) : 0;
+
+	if (!ret) {
+		curlun->cdrom = cdrom;
+		ret = count;
+	}
+	up_read(filesem);
+
+	return ret;
+}
+EXPORT_SYMBOL(fsg_store_cdrom);
+
+ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
+			    size_t count)
+{
+	bool		removable;
+	int		ret;
+
+	ret = strtobool(buf, &removable);
+	if (ret)
+		return ret;
+
+	curlun->removable = removable;
+
+	return count;
+}
+EXPORT_SYMBOL(fsg_store_removable);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/storage_common.h b/drivers/usb/gadget/storage_common.h
new file mode 100644
index 0000000..c74c2fd
--- /dev/null
+++ b/drivers/usb/gadget/storage_common.h
@@ -0,0 +1,229 @@
+#ifndef USB_STORAGE_COMMON_H
+#define USB_STORAGE_COMMON_H
+
+#include <linux/device.h>
+#include <linux/usb/storage.h>
+#include <scsi/scsi.h>
+#include <asm/unaligned.h>
+
+#ifndef DEBUG
+#undef VERBOSE_DEBUG
+#undef DUMP_MSGS
+#endif /* !DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VLDBG	LDBG
+#else
+#define VLDBG(lun, fmt, args...) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define _LMSG(func, lun, fmt, args...)					\
+	do {								\
+		if ((lun)->name_pfx && *(lun)->name_pfx)		\
+			func("%s/%s: " fmt, *(lun)->name_pfx,		\
+				 (lun)->name, ## args);			\
+		else							\
+			func("%s: " fmt, (lun)->name, ## args);		\
+	} while (0)
+
+#define LDBG(lun, fmt, args...)		_LMSG(pr_debug, lun, fmt, ## args)
+#define LERROR(lun, fmt, args...)	_LMSG(pr_err, lun, fmt, ## args)
+#define LWARN(lun, fmt, args...)	_LMSG(pr_warn, lun, fmt, ## args)
+#define LINFO(lun, fmt, args...)	_LMSG(pr_info, lun, fmt, ## args)
+
+
+#ifdef DUMP_MSGS
+
+#  define dump_msg(fsg, /* const char * */ label,			\
+		   /* const u8 * */ buf, /* unsigned */ length)		\
+do {									\
+	if (length < 512) {						\
+		DBG(fsg, "%s, length %u:\n", label, length);		\
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,	\
+			       16, 1, buf, length, 0);			\
+	}								\
+} while (0)
+
+#  define dump_cdb(fsg) do { } while (0)
+
+#else
+
+#  define dump_msg(fsg, /* const char * */ label, \
+		   /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
+
+#  ifdef VERBOSE_DEBUG
+
+#    define dump_cdb(fsg)						\
+	print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,	\
+		       16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0)		\
+
+#  else
+
+#    define dump_cdb(fsg) do { } while (0)
+
+#  endif /* VERBOSE_DEBUG */
+
+#endif /* DUMP_MSGS */
+
+/* Length of a SCSI Command Data Block */
+#define MAX_COMMAND_SIZE	16
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE				0
+#define SS_COMMUNICATION_FAILURE		0x040800
+#define SS_INVALID_COMMAND			0x052000
+#define SS_INVALID_FIELD_IN_CDB			0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE	0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED		0x052500
+#define SS_MEDIUM_NOT_PRESENT			0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED		0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION	0x062800
+#define SS_RESET_OCCURRED			0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED	0x053900
+#define SS_UNRECOVERED_READ_ERROR		0x031100
+#define SS_WRITE_ERROR				0x030c02
+#define SS_WRITE_PROTECTED			0x072700
+
+#define SK(x)		((u8) ((x) >> 16))	/* Sense Key byte, etc. */
+#define ASC(x)		((u8) ((x) >> 8))
+#define ASCQ(x)		((u8) (x))
+
+struct fsg_lun {
+	struct file	*filp;
+	loff_t		file_length;
+	loff_t		num_sectors;
+
+	unsigned int	initially_ro:1;
+	unsigned int	ro:1;
+	unsigned int	removable:1;
+	unsigned int	cdrom:1;
+	unsigned int	prevent_medium_removal:1;
+	unsigned int	registered:1;
+	unsigned int	info_valid:1;
+	unsigned int	nofua:1;
+
+	u32		sense_data;
+	u32		sense_data_info;
+	u32		unit_attention_data;
+
+	unsigned int	blkbits; /* Bits of logical block size
+						       of bound block device */
+	unsigned int	blksize; /* logical block size of bound block device */
+	struct device	dev;
+	const char	*name;		/* "lun.name" */
+	const char	**name_pfx;	/* "function.name" */
+};
+
+static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
+{
+	return curlun->filp != NULL;
+}
+
+/* Big enough to hold our biggest descriptor */
+#define EP0_BUFSIZE	256
+#define DELAYED_STATUS	(EP0_BUFSIZE + 999)	/* An impossibly large value */
+
+/* Default size of buffer length. */
+#define FSG_BUFLEN	((u32)16384)
+
+/* Maximal number of LUNs supported in mass storage function */
+#define FSG_MAX_LUNS	8
+
+enum fsg_buffer_state {
+	BUF_STATE_EMPTY = 0,
+	BUF_STATE_FULL,
+	BUF_STATE_BUSY
+};
+
+struct fsg_buffhd {
+	void				*buf;
+	enum fsg_buffer_state		state;
+	struct fsg_buffhd		*next;
+
+	/*
+	 * The NetChip 2280 is faster, and handles some protocol faults
+	 * better, if we don't submit any short bulk-out read requests.
+	 * So we will record the intended request length here.
+	 */
+	unsigned int			bulk_out_intended_length;
+
+	struct usb_request		*inreq;
+	int				inreq_busy;
+	struct usb_request		*outreq;
+	int				outreq_busy;
+};
+
+enum fsg_state {
+	/* This one isn't used anywhere */
+	FSG_STATE_COMMAND_PHASE = -10,
+	FSG_STATE_DATA_PHASE,
+	FSG_STATE_STATUS_PHASE,
+
+	FSG_STATE_IDLE = 0,
+	FSG_STATE_ABORT_BULK_OUT,
+	FSG_STATE_RESET,
+	FSG_STATE_INTERFACE_CHANGE,
+	FSG_STATE_CONFIG_CHANGE,
+	FSG_STATE_DISCONNECT,
+	FSG_STATE_EXIT,
+	FSG_STATE_TERMINATED
+};
+
+enum data_direction {
+	DATA_DIR_UNKNOWN = 0,
+	DATA_DIR_FROM_HOST,
+	DATA_DIR_TO_HOST,
+	DATA_DIR_NONE
+};
+
+static inline u32 get_unaligned_be24(u8 *buf)
+{
+	return 0xffffff & (u32) get_unaligned_be32(buf - 1);
+}
+
+static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
+{
+	return container_of(dev, struct fsg_lun, dev);
+}
+
+enum {
+	FSG_STRING_INTERFACE
+};
+
+extern struct usb_interface_descriptor fsg_intf_desc;
+
+extern struct usb_endpoint_descriptor fsg_fs_bulk_in_desc;
+extern struct usb_endpoint_descriptor fsg_fs_bulk_out_desc;
+extern struct usb_descriptor_header *fsg_fs_function[];
+
+extern struct usb_endpoint_descriptor fsg_hs_bulk_in_desc;
+extern struct usb_endpoint_descriptor fsg_hs_bulk_out_desc;
+extern struct usb_descriptor_header *fsg_hs_function[];
+
+extern struct usb_endpoint_descriptor fsg_ss_bulk_in_desc;
+extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc;
+extern struct usb_endpoint_descriptor fsg_ss_bulk_out_desc;
+extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc;
+extern struct usb_descriptor_header *fsg_ss_function[];
+
+void fsg_lun_close(struct fsg_lun *curlun);
+int fsg_lun_open(struct fsg_lun *curlun, const char *filename);
+int fsg_lun_fsync_sub(struct fsg_lun *curlun);
+void store_cdrom_address(u8 *dest, int msf, u32 addr);
+ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		      char *buf);
+ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		     const char *buf, size_t count);
+ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count);
+ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		       const char *buf, size_t count);
+ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			const char *buf, size_t count);
+ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
+			    size_t count);
+
+#endif /* USB_STORAGE_COMMON_H */
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 0ff3339..eccea1d 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -472,7 +472,7 @@
 		bot_enqueue_cmd_cbw(fu);
 		return 0;
 		break;
-	};
+	}
 	return -ENOTSUPP;
 }
 
@@ -617,7 +617,7 @@
 
 	default:
 		BUG();
-	};
+	}
 	return;
 
 cleanup:
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 59891b1..27768a7 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -356,7 +356,8 @@
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
 err1:
-	dev_err(&udc->dev, "failed to start %s: %d\n",
+	if (ret != -EISNAM)
+		dev_err(&udc->dev, "failed to start %s: %d\n",
 			udc->driver->function, ret);
 	udc->driver = NULL;
 	udc->dev.driver = NULL;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 0deb9d6..0dd07ae 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -95,6 +95,18 @@
 module_param(autoresume, uint, S_IRUGO);
 MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
 
+/* Maximum Autoresume time */
+unsigned max_autoresume;
+module_param(max_autoresume, uint, S_IRUGO);
+MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup");
+
+/* Interval between two remote wakeups */
+unsigned autoresume_interval_ms;
+module_param(autoresume_interval_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(autoresume_interval_ms,
+		"milliseconds to increase successive wakeup delays");
+
+static unsigned autoresume_step_ms;
 /*-------------------------------------------------------------------------*/
 
 static struct usb_device_descriptor device_desc = {
@@ -183,8 +195,16 @@
 		return;
 
 	if (autoresume) {
-		mod_timer(&autoresume_timer, jiffies + (HZ * autoresume));
-		DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
+		if (max_autoresume &&
+			(autoresume_step_ms > max_autoresume * 1000))
+				autoresume_step_ms = autoresume * 1000;
+
+		mod_timer(&autoresume_timer, jiffies +
+			msecs_to_jiffies(autoresume_step_ms));
+		DBG(cdev, "suspend, wakeup in %d milliseconds\n",
+			autoresume_step_ms);
+
+		autoresume_step_ms += autoresume_interval_ms;
 	} else
 		DBG(cdev, "%s\n", __func__);
 }
@@ -316,6 +336,7 @@
 	if (autoresume) {
 		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 		loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		autoresume_step_ms = autoresume * 1000;
 	}
 
 	/* support OTG systems */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b3f20d7..a9707da 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -54,7 +54,7 @@
 
 config USB_EHCI_ROOT_HUB_TT
 	bool "Root Hub Transaction Translators"
-	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
+	depends on USB_EHCI_HCD
 	---help---
 	  Some EHCI chips have vendor-specific extensions to integrate
 	  transaction translators, so that no OHCI or UHCI companion
@@ -66,7 +66,7 @@
 
 config USB_EHCI_TT_NEWSCHED
 	bool "Improved Transaction Translator scheduling"
-	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
+	depends on USB_EHCI_HCD
 	default y
 	---help---
 	  This changes the periodic scheduling code to fill more of the low
@@ -203,12 +203,11 @@
 	  Enables support for the on-chip EHCI controller on the SuperH.
 	  If you use the PCI EHCI controller, this option is not necessary.
 
-config USB_EHCI_S5P
+config USB_EHCI_EXYNOS
        tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
        depends on PLAT_S5P || ARCH_EXYNOS
        help
-	Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's
-	on-chip EHCI controller.
+	Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
 
 config USB_EHCI_MV
 	bool "EHCI support for Marvell PXA/MMP USB controller"
@@ -224,7 +223,7 @@
 	  on-chip EHCI USB controller" for those.
 
 config USB_W90X900_EHCI
-	bool "W90X900(W90P910) EHCI support"
+	tristate "W90X900(W90P910) EHCI support"
 	depends on ARCH_W90X900
 	---help---
 		Enables support for the W90X900 USB controller
@@ -367,14 +366,54 @@
 if USB_OHCI_HCD
 
 config USB_OHCI_HCD_OMAP1
-	bool "OHCI support for OMAP1/2 chips"
+	tristate "OHCI support for OMAP1/2 chips"
 	depends on ARCH_OMAP1
 	default y
 	---help---
 	  Enables support for the OHCI controller on OMAP1/2 chips.
 
+config USB_OHCI_HCD_SPEAR
+        tristate "Support for ST SPEAr on-chip OHCI USB controller"
+        depends on USB_OHCI_HCD && PLAT_SPEAR
+        default y
+        ---help---
+          Enables support for the on-chip OHCI controller on
+          ST SPEAr chips.
+
+config USB_OHCI_HCD_S3C2410
+        tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
+        depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
+        default y
+        ---help---
+          Enables support for the on-chip OHCI controller on
+          S3C24xx/S3C64xx chips.
+
+config USB_OHCI_HCD_LPC32XX
+	tristate "Support for LPC on-chip OHCI USB controller"
+	depends on USB_OHCI_HCD && ARCH_LPC32XX
+	default y
+	---help---
+          Enables support for the on-chip OHCI controller on
+          NXP chips.
+
+config USB_OHCI_HCD_PXA27X
+	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
+	depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
+	default y
+	---help---
+	  Enables support for the on-chip OHCI controller on
+	  PXA27x/PXA3xx chips.
+
+config USB_OHCI_HCD_AT91
+        tristate "Support for Atmel on-chip OHCI USB controller"
+        depends on USB_OHCI_HCD && ARCH_AT91
+        default y
+        ---help---
+          Enables support for the on-chip OHCI controller on
+          Atmel chips.
+
 config USB_OHCI_HCD_OMAP3
-	bool "OHCI support for OMAP3 and later chips"
+	tristate "OHCI support for OMAP3 and later chips"
 	depends on (ARCH_OMAP3 || ARCH_OMAP4)
 	default y
 	---help---
@@ -454,8 +493,8 @@
 	  If you use the PCI OHCI controller, this option is not necessary.
 
 config USB_OHCI_EXYNOS
-	boolean "OHCI support for Samsung EXYNOS SoC Series"
-	depends on ARCH_EXYNOS
+	tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
+	depends on PLAT_S5P || ARCH_EXYNOS
 	help
 	 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
 
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 50b0041..01e879e 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -34,10 +34,11 @@
 obj-$(CONFIG_USB_EHCI_HCD_OMAP)	+= ehci-omap.o
 obj-$(CONFIG_USB_EHCI_HCD_ORION)	+= ehci-orion.o
 obj-$(CONFIG_USB_EHCI_HCD_SPEAR)	+= ehci-spear.o
-obj-$(CONFIG_USB_EHCI_S5P)	+= ehci-s5p.o
+obj-$(CONFIG_USB_EHCI_EXYNOS)	+= ehci-exynos.o
 obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_MSM)	+= ehci-msm.o
 obj-$(CONFIG_USB_EHCI_TEGRA)	+= ehci-tegra.o
+obj-$(CONFIG_USB_W90X900_EHCI)	+= ehci-w90x900.o
 
 obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
@@ -46,6 +47,14 @@
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD_PCI)	+= ohci-pci.o
 obj-$(CONFIG_USB_OHCI_HCD_PLATFORM)	+= ohci-platform.o
+obj-$(CONFIG_USB_OHCI_EXYNOS)	+= ohci-exynos.o
+obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
+obj-$(CONFIG_USB_OHCI_HCD_OMAP3)	+= ohci-omap3.o
+obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
+obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
+obj-$(CONFIG_USB_OHCI_HCD_S3C2410)	+= ohci-s3c2410.o
+obj-$(CONFIG_USB_OHCI_HCD_LPC32XX)	+= ohci-nxp.o
+obj-$(CONFIG_USB_OHCI_HCD_PXA27X)	+= ohci-pxa27x.o
 
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 3b645ff..f417526 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -30,13 +30,17 @@
 static struct hc_driver __read_mostly ehci_atmel_hc_driver;
 
 /* interface and function clocks */
-static struct clk *iclk, *fclk;
+static struct clk *iclk, *fclk, *uclk;
 static int clocked;
 
 /*-------------------------------------------------------------------------*/
 
 static void atmel_start_clock(void)
 {
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(uclk, 48000000);
+		clk_prepare_enable(uclk);
+	}
 	clk_prepare_enable(iclk);
 	clk_prepare_enable(fclk);
 	clocked = 1;
@@ -46,6 +50,8 @@
 {
 	clk_disable_unprepare(fclk);
 	clk_disable_unprepare(iclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_disable_unprepare(uclk);
 	clocked = 0;
 }
 
@@ -130,6 +136,14 @@
 		retval = -ENOENT;
 		goto fail_request_resource;
 	}
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		uclk = devm_clk_get(&pdev->dev, "usb_clk");
+		if (IS_ERR(uclk)) {
+			dev_err(&pdev->dev, "failed to get uclk\n");
+			retval = PTR_ERR(uclk);
+			goto fail_request_resource;
+		}
+	}
 
 	ehci = hcd_to_ehci(hcd);
 	/* registers start at offset 0x0 */
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index aa5b603..4a9c2ed 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -334,6 +334,7 @@
 /* troubleshooting help: expose state in debugfs */
 
 static int debug_async_open(struct inode *, struct file *);
+static int debug_bandwidth_open(struct inode *, struct file *);
 static int debug_periodic_open(struct inode *, struct file *);
 static int debug_registers_open(struct inode *, struct file *);
 
@@ -347,6 +348,13 @@
 	.release	= debug_close,
 	.llseek		= default_llseek,
 };
+static const struct file_operations debug_bandwidth_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_bandwidth_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
 static const struct file_operations debug_periodic_fops = {
 	.owner		= THIS_MODULE,
 	.open		= debug_periodic_open,
@@ -379,7 +387,7 @@
 		case QH_LOW_SPEED:  tmp = 'l'; break; \
 		case QH_HIGH_SPEED: tmp = 'h'; break; \
 		default: tmp = '?'; break; \
-		}; tmp; })
+		} tmp; })
 
 static inline char token_mark(struct ehci_hcd *ehci, __hc32 token)
 {
@@ -525,6 +533,89 @@
 	return strlen(buf->output_buf);
 }
 
+static ssize_t fill_bandwidth_buffer(struct debug_buffer *buf)
+{
+	struct ehci_hcd		*ehci;
+	struct ehci_tt		*tt;
+	struct ehci_per_sched	*ps;
+	unsigned		temp, size;
+	char			*next;
+	unsigned		i;
+	u8			*bw;
+	u16			*bf;
+	u8			budget[EHCI_BANDWIDTH_SIZE];
+
+	ehci = hcd_to_ehci(bus_to_hcd(buf->bus));
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	*next = 0;
+
+	spin_lock_irq(&ehci->lock);
+
+	/* Dump the HS bandwidth table */
+	temp = scnprintf(next, size,
+			"HS bandwidth allocation (us per microframe)\n");
+	size -= temp;
+	next += temp;
+	for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) {
+		bw = &ehci->bandwidth[i];
+		temp = scnprintf(next, size,
+				"%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n",
+				i, bw[0], bw[1], bw[2], bw[3],
+					bw[4], bw[5], bw[6], bw[7]);
+		size -= temp;
+		next += temp;
+	}
+
+	/* Dump all the FS/LS tables */
+	list_for_each_entry(tt, &ehci->tt_list, tt_list) {
+		temp = scnprintf(next, size,
+				"\nTT %s port %d  FS/LS bandwidth allocation (us per frame)\n",
+				dev_name(&tt->usb_tt->hub->dev),
+				tt->tt_port + !!tt->usb_tt->multi);
+		size -= temp;
+		next += temp;
+
+		bf = tt->bandwidth;
+		temp = scnprintf(next, size,
+				"  %5u%5u%5u%5u%5u%5u%5u%5u\n",
+				bf[0], bf[1], bf[2], bf[3],
+					bf[4], bf[5], bf[6], bf[7]);
+		size -= temp;
+		next += temp;
+
+		temp = scnprintf(next, size,
+				"FS/LS budget (us per microframe)\n");
+		size -= temp;
+		next += temp;
+		compute_tt_budget(budget, tt);
+		for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) {
+			bw = &budget[i];
+			temp = scnprintf(next, size,
+					"%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n",
+					i, bw[0], bw[1], bw[2], bw[3],
+						bw[4], bw[5], bw[6], bw[7]);
+			size -= temp;
+			next += temp;
+		}
+		list_for_each_entry(ps, &tt->ps_list, ps_list) {
+			temp = scnprintf(next, size,
+					"%s ep %02x:  %4u @ %2u.%u+%u mask %04x\n",
+					dev_name(&ps->udev->dev),
+					ps->ep->desc.bEndpointAddress,
+					ps->tt_usecs,
+					ps->bw_phase, ps->phase_uf,
+					ps->bw_period, ps->cs_mask);
+			size -= temp;
+			next += temp;
+		}
+	}
+	spin_unlock_irq(&ehci->lock);
+
+	return next - buf->output_buf;
+}
+
 #define DBG_SCHED_LIMIT 64
 static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 {
@@ -571,7 +662,7 @@
 			case Q_TYPE_QH:
 				hw = p.qh->hw;
 				temp = scnprintf (next, size, " qh%d-%04x/%p",
-						p.qh->period,
+						p.qh->ps.period,
 						hc32_to_cpup(ehci,
 							&hw->hw_info2)
 							/* uframe masks */
@@ -618,7 +709,8 @@
 						speed_char (scratch),
 						scratch & 0x007f,
 						(scratch >> 8) & 0x000f, type,
-						p.qh->usecs, p.qh->c_usecs,
+						p.qh->ps.usecs,
+						p.qh->ps.c_usecs,
 						temp,
 						0x7ff & (scratch >> 16));
 
@@ -645,7 +737,7 @@
 			case Q_TYPE_SITD:
 				temp = scnprintf (next, size,
 					" sitd%d-%04x/%p",
-					p.sitd->stream->interval,
+					p.sitd->stream->ps.period,
 					hc32_to_cpup(ehci, &p.sitd->hw_uframe)
 						& 0x0000ffff,
 					p.sitd);
@@ -918,6 +1010,7 @@
 
 	return 0;
 }
+
 static int debug_async_open(struct inode *inode, struct file *file)
 {
 	file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
@@ -925,6 +1018,14 @@
 	return file->private_data ? 0 : -ENOMEM;
 }
 
+static int debug_bandwidth_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+			fill_bandwidth_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
 static int debug_periodic_open(struct inode *inode, struct file *file)
 {
 	struct debug_buffer *buf;
@@ -957,6 +1058,10 @@
 						&debug_async_fops))
 		goto file_error;
 
+	if (!debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus,
+						&debug_bandwidth_fops))
+		goto file_error;
+
 	if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus,
 						&debug_periodic_fops))
 		goto file_error;
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
new file mode 100644
index 0000000..016352e
--- /dev/null
+++ b/drivers/usb/host/ehci-exynos.c
@@ -0,0 +1,301 @@
+/*
+ * SAMSUNG EXYNOS USB HOST EHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/samsung_usb_phy.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI EXYNOS driver"
+
+#define EHCI_INSNREG00(base)			(base + 0x90)
+#define EHCI_INSNREG00_ENA_INCR16		(0x1 << 25)
+#define EHCI_INSNREG00_ENA_INCR8		(0x1 << 24)
+#define EHCI_INSNREG00_ENA_INCR4		(0x1 << 23)
+#define EHCI_INSNREG00_ENA_INCRX_ALIGN		(0x1 << 22)
+#define EHCI_INSNREG00_ENABLE_DMA_BURST	\
+	(EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 |	\
+	 EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
+
+static const char hcd_name[] = "ehci-exynos";
+static struct hc_driver __read_mostly exynos_ehci_hc_driver;
+
+struct exynos_ehci_hcd {
+	struct clk *clk;
+	struct usb_phy *phy;
+	struct usb_otg *otg;
+};
+
+#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
+
+static void exynos_setup_vbus_gpio(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int err;
+	int gpio;
+
+	if (!dev->of_node)
+		return;
+
+	gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
+	if (!gpio_is_valid(gpio))
+		return;
+
+	err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
+				    "ehci_vbus_gpio");
+	if (err)
+		dev_err(dev, "can't request ehci vbus gpio %d", gpio);
+}
+
+static int exynos_ehci_probe(struct platform_device *pdev)
+{
+	struct exynos_ehci_hcd *exynos_ehci;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct resource *res;
+	struct usb_phy *phy;
+	int irq;
+	int err;
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we move to full device tree support this will vanish off.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	exynos_setup_vbus_gpio(pdev);
+
+	hcd = usb_create_hcd(&exynos_ehci_hc_driver,
+			     &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
+		return -ENOMEM;
+	}
+	exynos_ehci = to_exynos_ehci(hcd);
+
+	if (of_device_is_compatible(pdev->dev.of_node,
+					"samsung,exynos5440-ehci"))
+		goto skip_phy;
+
+	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR(phy)) {
+		usb_put_hcd(hcd);
+		dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
+		return -EPROBE_DEFER;
+	} else {
+		exynos_ehci->phy = phy;
+		exynos_ehci->otg = phy->otg;
+	}
+
+skip_phy:
+
+	exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
+
+	if (IS_ERR(exynos_ehci->clk)) {
+		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+		err = PTR_ERR(exynos_ehci->clk);
+		goto fail_clk;
+	}
+
+	err = clk_prepare_enable(exynos_ehci->clk);
+	if (err)
+		goto fail_clk;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get I/O memory\n");
+		err = -ENXIO;
+		goto fail_io;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+		err = -ENOMEM;
+		goto fail_io;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "Failed to get IRQ\n");
+		err = -ENODEV;
+		goto fail_io;
+	}
+
+	if (exynos_ehci->otg)
+		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+	if (exynos_ehci->phy)
+		usb_phy_init(exynos_ehci->phy);
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs;
+
+	/* DMA burst Enable */
+	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to add USB HCD\n");
+		goto fail_add_hcd;
+	}
+
+	platform_set_drvdata(pdev, hcd);
+
+	return 0;
+
+fail_add_hcd:
+	if (exynos_ehci->phy)
+		usb_phy_shutdown(exynos_ehci->phy);
+fail_io:
+	clk_disable_unprepare(exynos_ehci->clk);
+fail_clk:
+	usb_put_hcd(hcd);
+	return err;
+}
+
+static int exynos_ehci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+	usb_remove_hcd(hcd);
+
+	if (exynos_ehci->otg)
+		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+	if (exynos_ehci->phy)
+		usb_phy_shutdown(exynos_ehci->phy);
+
+	clk_disable_unprepare(exynos_ehci->clk);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int exynos_ehci_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+	bool do_wakeup = device_may_wakeup(dev);
+	int rc;
+
+	rc = ehci_suspend(hcd, do_wakeup);
+
+	if (exynos_ehci->otg)
+		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+	if (exynos_ehci->phy)
+		usb_phy_shutdown(exynos_ehci->phy);
+
+	clk_disable_unprepare(exynos_ehci->clk);
+
+	return rc;
+}
+
+static int exynos_ehci_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+	clk_prepare_enable(exynos_ehci->clk);
+
+	if (exynos_ehci->otg)
+		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+	if (exynos_ehci->phy)
+		usb_phy_init(exynos_ehci->phy);
+
+	/* DMA burst Enable */
+	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
+	ehci_resume(hcd, false);
+	return 0;
+}
+#else
+#define exynos_ehci_suspend	NULL
+#define exynos_ehci_resume	NULL
+#endif
+
+static const struct dev_pm_ops exynos_ehci_pm_ops = {
+	.suspend	= exynos_ehci_suspend,
+	.resume		= exynos_ehci_resume,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_ehci_match[] = {
+	{ .compatible = "samsung,exynos4210-ehci" },
+	{ .compatible = "samsung,exynos5440-ehci" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_ehci_match);
+#endif
+
+static struct platform_driver exynos_ehci_driver = {
+	.probe		= exynos_ehci_probe,
+	.remove		= exynos_ehci_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name	= "exynos-ehci",
+		.owner	= THIS_MODULE,
+		.pm	= &exynos_ehci_pm_ops,
+		.of_match_table = of_match_ptr(exynos_ehci_match),
+	}
+};
+static const struct ehci_driver_overrides exynos_overrides __initdata = {
+	.extra_priv_size = sizeof(struct exynos_ehci_hcd),
+};
+
+static int __init ehci_exynos_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides);
+	return platform_driver_register(&exynos_ehci_driver);
+}
+module_init(ehci_exynos_init);
+
+static void __exit ehci_exynos_cleanup(void)
+{
+	platform_driver_unregister(&exynos_ehci_driver);
+}
+module_exit(ehci_exynos_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:exynos-ehci");
+MODULE_AUTHOR("Jingoo Han");
+MODULE_AUTHOR("Joonyoung Shim");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f2407b2..a06d501 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -57,7 +57,7 @@
 	pr_debug("initializing FSL-SOC USB Controller\n");
 
 	/* Need platform data for setup */
-	pdata = (struct fsl_usb2_platform_data *)dev_get_platdata(&pdev->dev);
+	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
 		dev_err(&pdev->dev,
 			"No platform data for %s.\n", dev_name(&pdev->dev));
@@ -664,7 +664,7 @@
 	 * generic hardware linkage
 	 */
 	.irq = ehci_irq,
-	.flags = HCD_USB2 | HCD_MEMORY,
+	.flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index 83ab51a..b52a66c 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -43,7 +43,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
+	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 86ab9fd..e8ba4c4 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -110,6 +110,9 @@
 #include "ehci.h"
 #include "pci-quirks.h"
 
+static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE],
+		struct ehci_tt *tt);
+
 /*
  * The MosChip MCS9990 controller updates its microframe counter
  * a little before the frame counter, and occasionally we will read
@@ -484,6 +487,7 @@
 	INIT_LIST_HEAD(&ehci->intr_qh_list);
 	INIT_LIST_HEAD(&ehci->cached_itd_list);
 	INIT_LIST_HEAD(&ehci->cached_sitd_list);
+	INIT_LIST_HEAD(&ehci->tt_list);
 
 	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
 		/* periodic schedule size can be smaller than default */
@@ -956,6 +960,7 @@
 			goto idle_timeout;
 
 		/* BUG_ON(!list_empty(&stream->free_list)); */
+		reserve_release_iso_bandwidth(ehci, stream, -1);
 		kfree(stream);
 		goto done;
 	}
@@ -982,6 +987,8 @@
 		if (qh->clearing_tt)
 			goto idle_timeout;
 		if (list_empty (&qh->qtd_list)) {
+			if (qh->ps.bw_uperiod)
+				reserve_release_intr_bandwidth(ehci, qh, -1);
 			qh_destroy(ehci, qh);
 			break;
 		}
@@ -1022,7 +1029,6 @@
 	 * the toggle bit in the QH.
 	 */
 	if (qh) {
-		usb_settoggle(qh->dev, epnum, is_out, 0);
 		if (!list_empty(&qh->qtd_list)) {
 			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
 		} else {
@@ -1030,6 +1036,7 @@
 			 * while the QH is active.  Unlink it now;
 			 * re-linking will call qh_refresh().
 			 */
+			usb_settoggle(qh->ps.udev, epnum, is_out, 0);
 			qh->exception = 1;
 			if (eptype == USB_ENDPOINT_XFER_BULK)
 				start_unlink_async(ehci, qh);
@@ -1048,6 +1055,19 @@
 
 /*-------------------------------------------------------------------------*/
 
+/* Device addition and removal */
+
+static void ehci_remove_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	spin_lock_irq(&ehci->lock);
+	drop_tt(udev);
+	spin_unlock_irq(&ehci->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
 #ifdef	CONFIG_PM
 
 /* suspend/resume, section 4.3 */
@@ -1075,6 +1095,14 @@
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	spin_unlock_irq(&ehci->lock);
 
+	synchronize_irq(hcd->irq);
+
+	/* Check for race with a wakeup request */
+	if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+		ehci_resume(hcd, false);
+		return -EBUSY;
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ehci_suspend);
@@ -1158,7 +1186,7 @@
 	 * generic hardware linkage
 	 */
 	.irq =			ehci_irq,
-	.flags =		HCD_MEMORY | HCD_USB2,
+	.flags =		HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
@@ -1191,6 +1219,11 @@
 	.bus_resume =		ehci_bus_resume,
 	.relinquish_port =	ehci_relinquish_port,
 	.port_handed_over =	ehci_port_handed_over,
+
+	/*
+	 * device support
+	 */
+	.free_dev =		ehci_remove_device,
 };
 
 void ehci_init_driver(struct hc_driver *drv,
@@ -1238,11 +1271,6 @@
 #define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
 #endif
 
-#ifdef CONFIG_USB_W90X900_EHCI
-#include "ehci-w90x900.c"
-#define	PLATFORM_DRIVER		ehci_hcd_w90x900_driver
-#endif
-
 #ifdef CONFIG_USB_OCTEON_EHCI
 #include "ehci-octeon.c"
 #define PLATFORM_DRIVER		ehci_octeon_driver
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 52a7773..c0fb6a8 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -224,11 +224,11 @@
 		hw->hw_next = EHCI_LIST_END(ehci);
 		hw->hw_qtd_next = EHCI_LIST_END(ehci);
 		hw->hw_alt_next = EHCI_LIST_END(ehci);
-		hw->hw_token &= ~QTD_STS_ACTIVE;
 		ehci->dummy->hw = hw;
 
 		for (i = 0; i < ehci->periodic_size; i++)
-			ehci->periodic[i] = ehci->dummy->qh_dma;
+			ehci->periodic[i] = cpu_to_hc32(ehci,
+					ehci->dummy->qh_dma);
 	} else {
 		for (i = 0; i < ehci->periodic_size; i++)
 			ehci->periodic[i] = EHCI_LIST_END(ehci);
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 0f717dc..f341651 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -42,7 +42,6 @@
 
 static const char hcd_name[] = "ehci-msm";
 static struct hc_driver __read_mostly msm_hc_driver;
-static struct usb_phy *phy;
 
 static int ehci_msm_reset(struct usb_hcd *hcd)
 {
@@ -70,6 +69,7 @@
 {
 	struct usb_hcd *hcd;
 	struct resource *res;
+	struct usb_phy *phy;
 	int ret;
 
 	dev_dbg(&pdev->dev, "ehci_msm proble\n");
@@ -108,10 +108,14 @@
 	 * powering up VBUS, mapping of registers address space and power
 	 * management.
 	 */
-	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+	if (pdev->dev.of_node)
+		phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+	else
+		phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+
 	if (IS_ERR(phy)) {
 		dev_err(&pdev->dev, "unable to find transceiver\n");
-		ret = -ENODEV;
+		ret = -EPROBE_DEFER;
 		goto put_hcd;
 	}
 
@@ -121,6 +125,7 @@
 		goto put_hcd;
 	}
 
+	hcd->phy = phy;
 	device_init_wakeup(&pdev->dev, 1);
 	/*
 	 * OTG device parent of HCD takes care of putting
@@ -147,7 +152,7 @@
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 
-	otg_set_host(phy->otg, NULL);
+	otg_set_host(hcd->phy->otg, NULL);
 
 	/* FIXME: need to call usb_remove_hcd() here? */
 
@@ -186,12 +191,19 @@
 	.resume          = ehci_msm_pm_resume,
 };
 
+static struct of_device_id msm_ehci_dt_match[] = {
+	{ .compatible = "qcom,ehci-host", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, msm_ehci_dt_match);
+
 static struct platform_driver ehci_msm_driver = {
 	.probe	= ehci_msm_probe,
 	.remove	= ehci_msm_remove,
 	.driver = {
 		   .name = "msm_hsusb_host",
 		   .pm = &ehci_msm_dev_pm_ops,
+		   .of_match_table = msm_ehci_dt_match,
 	},
 };
 
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 35cdbd8..417c10d 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -96,7 +96,7 @@
 	 * generic hardware linkage
 	 */
 	.irq = ehci_irq,
-	.flags = HCD_MEMORY | HCD_USB2,
+	.flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index 45cc001..ab0397e 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -51,7 +51,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
+	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 854c2ec..3e86bf4 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -58,8 +58,6 @@
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	struct pci_dev		*p_smbus;
-	u8			rev;
 	u32			temp;
 	int			retval;
 
@@ -175,22 +173,12 @@
 		/* SB600 and old version of SB700 have a bug in EHCI controller,
 		 * which causes usb devices lose response in some cases.
 		 */
-		if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
-			p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
-						 PCI_DEVICE_ID_ATI_SBX00_SMBUS,
-						 NULL);
-			if (!p_smbus)
-				break;
-			rev = p_smbus->revision;
-			if ((pdev->device == 0x4386) || (rev == 0x3a)
-			    || (rev == 0x3b)) {
-				u8 tmp;
-				ehci_info(ehci, "applying AMD SB600/SB700 USB "
-					"freeze workaround\n");
-				pci_read_config_byte(pdev, 0x53, &tmp);
-				pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
-			}
-			pci_dev_put(p_smbus);
+		if ((pdev->device == 0x4386 || pdev->device == 0x4396) &&
+				usb_amd_hang_symptom_quirk()) {
+			u8 tmp;
+			ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n");
+			pci_read_config_byte(pdev, 0x53, &tmp);
+			pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
 		}
 		break;
 	case PCI_VENDOR_ID_NETMOS:
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 601e208..893b707 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -286,7 +286,7 @@
 #else
 	.irq =			ehci_irq,
 #endif
-	.flags =		HCD_MEMORY | HCD_USB2,
+	.flags =		HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 932293f..6cc5567 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -28,7 +28,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
+	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index fd98377..8188542 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -71,7 +71,7 @@
 	.product_desc		= "PS3 EHCI Host Controller",
 	.hcd_priv_size		= sizeof(struct ehci_hcd),
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
+	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 	.reset			= ps3_ehci_hc_reset,
 	.start			= ehci_run,
 	.stop			= ehci_stop,
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a7f776a..db05bd8 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -105,9 +105,9 @@
 
 		is_out = qh->is_out;
 		epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
-		if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+		if (unlikely(!usb_gettoggle(qh->ps.udev, epnum, is_out))) {
 			hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
-			usb_settoggle (qh->dev, epnum, is_out, 1);
+			usb_settoggle(qh->ps.udev, epnum, is_out, 1);
 		}
 	}
 
@@ -247,8 +247,6 @@
 
 static void
 ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
-__releases(ehci->lock)
-__acquires(ehci->lock)
 {
 	if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
 		/* ... update hc-wide periodic stats */
@@ -274,11 +272,8 @@
 		urb->actual_length, urb->transfer_buffer_length);
 #endif
 
-	/* complete() can reenter this HCD */
 	usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
-	spin_unlock (&ehci->lock);
 	usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
-	spin_lock (&ehci->lock);
 }
 
 static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
@@ -802,26 +797,35 @@
 	 * For control/bulk requests, the HC or TT handles these.
 	 */
 	if (type == PIPE_INTERRUPT) {
-		qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
+		unsigned	tmp;
+
+		qh->ps.usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
 				is_input, 0,
 				hb_mult(maxp) * max_packet(maxp)));
-		qh->start = NO_FRAME;
+		qh->ps.phase = NO_FRAME;
 
 		if (urb->dev->speed == USB_SPEED_HIGH) {
-			qh->c_usecs = 0;
+			qh->ps.c_usecs = 0;
 			qh->gap_uf = 0;
 
-			qh->period = urb->interval >> 3;
-			if (qh->period == 0 && urb->interval != 1) {
+			if (urb->interval > 1 && urb->interval < 8) {
 				/* NOTE interval 2 or 4 uframes could work.
 				 * But interval 1 scheduling is simpler, and
 				 * includes high bandwidth.
 				 */
 				urb->interval = 1;
-			} else if (qh->period > ehci->periodic_size) {
-				qh->period = ehci->periodic_size;
-				urb->interval = qh->period << 3;
+			} else if (urb->interval > ehci->periodic_size << 3) {
+				urb->interval = ehci->periodic_size << 3;
 			}
+			qh->ps.period = urb->interval >> 3;
+
+			/* period for bandwidth allocation */
+			tmp = min_t(unsigned, EHCI_BANDWIDTH_SIZE,
+					1 << (urb->ep->desc.bInterval - 1));
+
+			/* Allow urb->interval to override */
+			qh->ps.bw_uperiod = min_t(unsigned, tmp, urb->interval);
+			qh->ps.bw_period = qh->ps.bw_uperiod >> 3;
 		} else {
 			int		think_time;
 
@@ -831,27 +835,35 @@
 
 			/* FIXME this just approximates SPLIT/CSPLIT times */
 			if (is_input) {		// SPLIT, gap, CSPLIT+DATA
-				qh->c_usecs = qh->usecs + HS_USECS (0);
-				qh->usecs = HS_USECS (1);
+				qh->ps.c_usecs = qh->ps.usecs + HS_USECS(0);
+				qh->ps.usecs = HS_USECS(1);
 			} else {		// SPLIT+DATA, gap, CSPLIT
-				qh->usecs += HS_USECS (1);
-				qh->c_usecs = HS_USECS (0);
+				qh->ps.usecs += HS_USECS(1);
+				qh->ps.c_usecs = HS_USECS(0);
 			}
 
 			think_time = tt ? tt->think_time : 0;
-			qh->tt_usecs = NS_TO_US (think_time +
+			qh->ps.tt_usecs = NS_TO_US(think_time +
 					usb_calc_bus_time (urb->dev->speed,
 					is_input, 0, max_packet (maxp)));
-			qh->period = urb->interval;
-			if (qh->period > ehci->periodic_size) {
-				qh->period = ehci->periodic_size;
-				urb->interval = qh->period;
-			}
+			if (urb->interval > ehci->periodic_size)
+				urb->interval = ehci->periodic_size;
+			qh->ps.period = urb->interval;
+
+			/* period for bandwidth allocation */
+			tmp = min_t(unsigned, EHCI_BANDWIDTH_FRAMES,
+					urb->ep->desc.bInterval);
+			tmp = rounddown_pow_of_two(tmp);
+
+			/* Allow urb->interval to override */
+			qh->ps.bw_period = min_t(unsigned, tmp, urb->interval);
+			qh->ps.bw_uperiod = qh->ps.bw_period << 3;
 		}
 	}
 
 	/* support for tt scheduling, and access to toggles */
-	qh->dev = urb->dev;
+	qh->ps.udev = urb->dev;
+	qh->ps.ep = urb->ep;
 
 	/* using TT? */
 	switch (urb->dev->speed) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
deleted file mode 100644
index 7c3de95..0000000
--- a/drivers/usb/host/ehci-s5p.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * SAMSUNG S5P USB HOST EHCI Controller
- *
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Jingoo Han <jg1.han@samsung.com>
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/samsung_usb_phy.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/otg.h>
-
-#include "ehci.h"
-
-#define DRIVER_DESC "EHCI s5p driver"
-
-#define EHCI_INSNREG00(base)			(base + 0x90)
-#define EHCI_INSNREG00_ENA_INCR16		(0x1 << 25)
-#define EHCI_INSNREG00_ENA_INCR8		(0x1 << 24)
-#define EHCI_INSNREG00_ENA_INCR4		(0x1 << 23)
-#define EHCI_INSNREG00_ENA_INCRX_ALIGN		(0x1 << 22)
-#define EHCI_INSNREG00_ENABLE_DMA_BURST	\
-	(EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 |	\
-	 EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
-
-static const char hcd_name[] = "ehci-s5p";
-static struct hc_driver __read_mostly s5p_ehci_hc_driver;
-
-struct s5p_ehci_hcd {
-	struct clk *clk;
-	struct usb_phy *phy;
-	struct usb_otg *otg;
-	struct s5p_ehci_platdata *pdata;
-};
-
-static struct s5p_ehci_platdata empty_platdata;
-
-#define to_s5p_ehci(hcd)      (struct s5p_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
-
-static void s5p_setup_vbus_gpio(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	int err;
-	int gpio;
-
-	if (!dev->of_node)
-		return;
-
-	gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
-	if (!gpio_is_valid(gpio))
-		return;
-
-	err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
-				    "ehci_vbus_gpio");
-	if (err)
-		dev_err(dev, "can't request ehci vbus gpio %d", gpio);
-}
-
-static int s5p_ehci_probe(struct platform_device *pdev)
-{
-	struct s5p_ehci_platdata *pdata = dev_get_platdata(&pdev->dev);
-	struct s5p_ehci_hcd *s5p_ehci;
-	struct usb_hcd *hcd;
-	struct ehci_hcd *ehci;
-	struct resource *res;
-	struct usb_phy *phy;
-	int irq;
-	int err;
-
-	/*
-	 * Right now device-tree probed devices don't get dma_mask set.
-	 * Since shared usb code relies on it, set it here for now.
-	 * Once we move to full device tree support this will vanish off.
-	 */
-	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-	if (!pdev->dev.coherent_dma_mask)
-		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	s5p_setup_vbus_gpio(pdev);
-
-	hcd = usb_create_hcd(&s5p_ehci_hc_driver,
-			     &pdev->dev, dev_name(&pdev->dev));
-	if (!hcd) {
-		dev_err(&pdev->dev, "Unable to create HCD\n");
-		return -ENOMEM;
-	}
-	s5p_ehci = to_s5p_ehci(hcd);
-
-	if (of_device_is_compatible(pdev->dev.of_node,
-					"samsung,exynos5440-ehci")) {
-		s5p_ehci->pdata = &empty_platdata;
-		goto skip_phy;
-	}
-
-	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR(phy)) {
-		/* Fallback to pdata */
-		if (!pdata) {
-			usb_put_hcd(hcd);
-			dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
-			return -EPROBE_DEFER;
-		} else {
-			s5p_ehci->pdata = pdata;
-		}
-	} else {
-		s5p_ehci->phy = phy;
-		s5p_ehci->otg = phy->otg;
-	}
-
-skip_phy:
-
-	s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
-
-	if (IS_ERR(s5p_ehci->clk)) {
-		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
-		err = PTR_ERR(s5p_ehci->clk);
-		goto fail_clk;
-	}
-
-	err = clk_prepare_enable(s5p_ehci->clk);
-	if (err)
-		goto fail_clk;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get I/O memory\n");
-		err = -ENXIO;
-		goto fail_io;
-	}
-
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-	hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		dev_err(&pdev->dev, "Failed to remap I/O memory\n");
-		err = -ENOMEM;
-		goto fail_io;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "Failed to get IRQ\n");
-		err = -ENODEV;
-		goto fail_io;
-	}
-
-	if (s5p_ehci->otg)
-		s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-	if (s5p_ehci->phy)
-		usb_phy_init(s5p_ehci->phy);
-	else if (s5p_ehci->pdata->phy_init)
-		s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
-
-	ehci = hcd_to_ehci(hcd);
-	ehci->caps = hcd->regs;
-
-	/* DMA burst Enable */
-	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
-
-	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
-	if (err) {
-		dev_err(&pdev->dev, "Failed to add USB HCD\n");
-		goto fail_add_hcd;
-	}
-
-	platform_set_drvdata(pdev, hcd);
-
-	return 0;
-
-fail_add_hcd:
-	if (s5p_ehci->phy)
-		usb_phy_shutdown(s5p_ehci->phy);
-	else if (s5p_ehci->pdata->phy_exit)
-		s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
-fail_io:
-	clk_disable_unprepare(s5p_ehci->clk);
-fail_clk:
-	usb_put_hcd(hcd);
-	return err;
-}
-
-static int s5p_ehci_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd);
-
-	usb_remove_hcd(hcd);
-
-	if (s5p_ehci->otg)
-		s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-	if (s5p_ehci->phy)
-		usb_phy_shutdown(s5p_ehci->phy);
-	else if (s5p_ehci->pdata->phy_exit)
-		s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
-
-	clk_disable_unprepare(s5p_ehci->clk);
-
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s5p_ehci_suspend(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd);
-	struct platform_device *pdev = to_platform_device(dev);
-
-	bool do_wakeup = device_may_wakeup(dev);
-	int rc;
-
-	rc = ehci_suspend(hcd, do_wakeup);
-
-	if (s5p_ehci->otg)
-		s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-	if (s5p_ehci->phy)
-		usb_phy_shutdown(s5p_ehci->phy);
-	else if (s5p_ehci->pdata->phy_exit)
-		s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
-
-	clk_disable_unprepare(s5p_ehci->clk);
-
-	return rc;
-}
-
-static int s5p_ehci_resume(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct  s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd);
-	struct platform_device *pdev = to_platform_device(dev);
-
-	clk_prepare_enable(s5p_ehci->clk);
-
-	if (s5p_ehci->otg)
-		s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-	if (s5p_ehci->phy)
-		usb_phy_init(s5p_ehci->phy);
-	else if (s5p_ehci->pdata->phy_init)
-		s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
-
-	/* DMA burst Enable */
-	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
-
-	ehci_resume(hcd, false);
-	return 0;
-}
-#else
-#define s5p_ehci_suspend	NULL
-#define s5p_ehci_resume		NULL
-#endif
-
-static const struct dev_pm_ops s5p_ehci_pm_ops = {
-	.suspend	= s5p_ehci_suspend,
-	.resume		= s5p_ehci_resume,
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id exynos_ehci_match[] = {
-	{ .compatible = "samsung,exynos4210-ehci" },
-	{ .compatible = "samsung,exynos5440-ehci" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, exynos_ehci_match);
-#endif
-
-static struct platform_driver s5p_ehci_driver = {
-	.probe		= s5p_ehci_probe,
-	.remove		= s5p_ehci_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-	.driver = {
-		.name	= "s5p-ehci",
-		.owner	= THIS_MODULE,
-		.pm	= &s5p_ehci_pm_ops,
-		.of_match_table = of_match_ptr(exynos_ehci_match),
-	}
-};
-static const struct ehci_driver_overrides s5p_overrides __initdata = {
-	.extra_priv_size = sizeof(struct s5p_ehci_hcd),
-};
-
-static int __init ehci_s5p_init(void)
-{
-	if (usb_disabled())
-		return -ENODEV;
-
-	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-	ehci_init_driver(&s5p_ehci_hc_driver, &s5p_overrides);
-	return platform_driver_register(&s5p_ehci_driver);
-}
-module_init(ehci_s5p_init);
-
-static void __exit ehci_s5p_cleanup(void)
-{
-	platform_driver_unregister(&s5p_ehci_driver);
-}
-module_exit(ehci_s5p_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_ALIAS("platform:s5p-ehci");
-MODULE_AUTHOR("Jingoo Han");
-MODULE_AUTHOR("Joonyoung Shim");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 85dd24e..e113fd7 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -103,83 +103,210 @@
 		*hw_p = *shadow_next_periodic(ehci, &here,
 				Q_NEXT_TYPE(ehci, *hw_p));
 	else
-		*hw_p = ehci->dummy->qh_dma;
-}
-
-/* how many of the uframe's 125 usecs are allocated? */
-static unsigned short
-periodic_usecs (struct ehci_hcd *ehci, unsigned frame, unsigned uframe)
-{
-	__hc32			*hw_p = &ehci->periodic [frame];
-	union ehci_shadow	*q = &ehci->pshadow [frame];
-	unsigned		usecs = 0;
-	struct ehci_qh_hw	*hw;
-
-	while (q->ptr) {
-		switch (hc32_to_cpu(ehci, Q_NEXT_TYPE(ehci, *hw_p))) {
-		case Q_TYPE_QH:
-			hw = q->qh->hw;
-			/* is it in the S-mask? */
-			if (hw->hw_info2 & cpu_to_hc32(ehci, 1 << uframe))
-				usecs += q->qh->usecs;
-			/* ... or C-mask? */
-			if (hw->hw_info2 & cpu_to_hc32(ehci,
-					1 << (8 + uframe)))
-				usecs += q->qh->c_usecs;
-			hw_p = &hw->hw_next;
-			q = &q->qh->qh_next;
-			break;
-		// case Q_TYPE_FSTN:
-		default:
-			/* for "save place" FSTNs, count the relevant INTR
-			 * bandwidth from the previous frame
-			 */
-			if (q->fstn->hw_prev != EHCI_LIST_END(ehci)) {
-				ehci_dbg (ehci, "ignoring FSTN cost ...\n");
-			}
-			hw_p = &q->fstn->hw_next;
-			q = &q->fstn->fstn_next;
-			break;
-		case Q_TYPE_ITD:
-			if (q->itd->hw_transaction[uframe])
-				usecs += q->itd->stream->usecs;
-			hw_p = &q->itd->hw_next;
-			q = &q->itd->itd_next;
-			break;
-		case Q_TYPE_SITD:
-			/* is it in the S-mask?  (count SPLIT, DATA) */
-			if (q->sitd->hw_uframe & cpu_to_hc32(ehci,
-					1 << uframe)) {
-				if (q->sitd->hw_fullspeed_ep &
-						cpu_to_hc32(ehci, 1<<31))
-					usecs += q->sitd->stream->usecs;
-				else	/* worst case for OUT start-split */
-					usecs += HS_USECS_ISO (188);
-			}
-
-			/* ... C-mask?  (count CSPLIT, DATA) */
-			if (q->sitd->hw_uframe &
-					cpu_to_hc32(ehci, 1 << (8 + uframe))) {
-				/* worst case for IN complete-split */
-				usecs += q->sitd->stream->c_usecs;
-			}
-
-			hw_p = &q->sitd->hw_next;
-			q = &q->sitd->sitd_next;
-			break;
-		}
-	}
-#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
-	if (usecs > ehci->uframe_periodic_max)
-		ehci_err (ehci, "uframe %d sched overrun: %d usecs\n",
-			frame * 8 + uframe, usecs);
-#endif
-	return usecs;
+		*hw_p = cpu_to_hc32(ehci, ehci->dummy->qh_dma);
 }
 
 /*-------------------------------------------------------------------------*/
 
-static int same_tt (struct usb_device *dev1, struct usb_device *dev2)
+/* Bandwidth and TT management */
+
+/* Find the TT data structure for this device; create it if necessary */
+static struct ehci_tt *find_tt(struct usb_device *udev)
+{
+	struct usb_tt		*utt = udev->tt;
+	struct ehci_tt		*tt, **tt_index, **ptt;
+	unsigned		port;
+	bool			allocated_index = false;
+
+	if (!utt)
+		return NULL;		/* Not below a TT */
+
+	/*
+	 * Find/create our data structure.
+	 * For hubs with a single TT, we get it directly.
+	 * For hubs with multiple TTs, there's an extra level of pointers.
+	 */
+	tt_index = NULL;
+	if (utt->multi) {
+		tt_index = utt->hcpriv;
+		if (!tt_index) {		/* Create the index array */
+			tt_index = kzalloc(utt->hub->maxchild *
+					sizeof(*tt_index), GFP_ATOMIC);
+			if (!tt_index)
+				return ERR_PTR(-ENOMEM);
+			utt->hcpriv = tt_index;
+			allocated_index = true;
+		}
+		port = udev->ttport - 1;
+		ptt = &tt_index[port];
+	} else {
+		port = 0;
+		ptt = (struct ehci_tt **) &utt->hcpriv;
+	}
+
+	tt = *ptt;
+	if (!tt) {				/* Create the ehci_tt */
+		struct ehci_hcd		*ehci =
+				hcd_to_ehci(bus_to_hcd(udev->bus));
+
+		tt = kzalloc(sizeof(*tt), GFP_ATOMIC);
+		if (!tt) {
+			if (allocated_index) {
+				utt->hcpriv = NULL;
+				kfree(tt_index);
+			}
+			return ERR_PTR(-ENOMEM);
+		}
+		list_add_tail(&tt->tt_list, &ehci->tt_list);
+		INIT_LIST_HEAD(&tt->ps_list);
+		tt->usb_tt = utt;
+		tt->tt_port = port;
+		*ptt = tt;
+	}
+
+	return tt;
+}
+
+/* Release the TT above udev, if it's not in use */
+static void drop_tt(struct usb_device *udev)
+{
+	struct usb_tt		*utt = udev->tt;
+	struct ehci_tt		*tt, **tt_index, **ptt;
+	int			cnt, i;
+
+	if (!utt || !utt->hcpriv)
+		return;		/* Not below a TT, or never allocated */
+
+	cnt = 0;
+	if (utt->multi) {
+		tt_index = utt->hcpriv;
+		ptt = &tt_index[udev->ttport - 1];
+
+		/* How many entries are left in tt_index? */
+		for (i = 0; i < utt->hub->maxchild; ++i)
+			cnt += !!tt_index[i];
+	} else {
+		tt_index = NULL;
+		ptt = (struct ehci_tt **) &utt->hcpriv;
+	}
+
+	tt = *ptt;
+	if (!tt || !list_empty(&tt->ps_list))
+		return;		/* never allocated, or still in use */
+
+	list_del(&tt->tt_list);
+	*ptt = NULL;
+	kfree(tt);
+	if (cnt == 1) {
+		utt->hcpriv = NULL;
+		kfree(tt_index);
+	}
+}
+
+static void bandwidth_dbg(struct ehci_hcd *ehci, int sign, char *type,
+		struct ehci_per_sched *ps)
+{
+	dev_dbg(&ps->udev->dev,
+			"ep %02x: %s %s @ %u+%u (%u.%u+%u) [%u/%u us] mask %04x\n",
+			ps->ep->desc.bEndpointAddress,
+			(sign >= 0 ? "reserve" : "release"), type,
+			(ps->bw_phase << 3) + ps->phase_uf, ps->bw_uperiod,
+			ps->phase, ps->phase_uf, ps->period,
+			ps->usecs, ps->c_usecs, ps->cs_mask);
+}
+
+static void reserve_release_intr_bandwidth(struct ehci_hcd *ehci,
+		struct ehci_qh *qh, int sign)
+{
+	unsigned		start_uf;
+	unsigned		i, j, m;
+	int			usecs = qh->ps.usecs;
+	int			c_usecs = qh->ps.c_usecs;
+	int			tt_usecs = qh->ps.tt_usecs;
+	struct ehci_tt		*tt;
+
+	if (qh->ps.phase == NO_FRAME)	/* Bandwidth wasn't reserved */
+		return;
+	start_uf = qh->ps.bw_phase << 3;
+
+	bandwidth_dbg(ehci, sign, "intr", &qh->ps);
+
+	if (sign < 0) {		/* Release bandwidth */
+		usecs = -usecs;
+		c_usecs = -c_usecs;
+		tt_usecs = -tt_usecs;
+	}
+
+	/* Entire transaction (high speed) or start-split (full/low speed) */
+	for (i = start_uf + qh->ps.phase_uf; i < EHCI_BANDWIDTH_SIZE;
+			i += qh->ps.bw_uperiod)
+		ehci->bandwidth[i] += usecs;
+
+	/* Complete-split (full/low speed) */
+	if (qh->ps.c_usecs) {
+		/* NOTE: adjustments needed for FSTN */
+		for (i = start_uf; i < EHCI_BANDWIDTH_SIZE;
+				i += qh->ps.bw_uperiod) {
+			for ((j = 2, m = 1 << (j+8)); j < 8; (++j, m <<= 1)) {
+				if (qh->ps.cs_mask & m)
+					ehci->bandwidth[i+j] += c_usecs;
+			}
+		}
+	}
+
+	/* FS/LS bus bandwidth */
+	if (tt_usecs) {
+		tt = find_tt(qh->ps.udev);
+		if (sign > 0)
+			list_add_tail(&qh->ps.ps_list, &tt->ps_list);
+		else
+			list_del(&qh->ps.ps_list);
+
+		for (i = start_uf >> 3; i < EHCI_BANDWIDTH_FRAMES;
+				i += qh->ps.bw_period)
+			tt->bandwidth[i] += tt_usecs;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE],
+		struct ehci_tt *tt)
+{
+	struct ehci_per_sched	*ps;
+	unsigned		uframe, uf, x;
+	u8			*budget_line;
+
+	if (!tt)
+		return;
+	memset(budget_table, 0, EHCI_BANDWIDTH_SIZE);
+
+	/* Add up the contributions from all the endpoints using this TT */
+	list_for_each_entry(ps, &tt->ps_list, ps_list) {
+		for (uframe = ps->bw_phase << 3; uframe < EHCI_BANDWIDTH_SIZE;
+				uframe += ps->bw_uperiod) {
+			budget_line = &budget_table[uframe];
+			x = ps->tt_usecs;
+
+			/* propagate the time forward */
+			for (uf = ps->phase_uf; uf < 8; ++uf) {
+				x += budget_line[uf];
+
+				/* Each microframe lasts 125 us */
+				if (x <= 125) {
+					budget_line[uf] = x;
+					break;
+				} else {
+					budget_line[uf] = 125;
+					x -= 125;
+				}
+			}
+		}
+	}
+}
+
+static int __maybe_unused same_tt(struct usb_device *dev1,
+		struct usb_device *dev2)
 {
 	if (!dev1->tt || !dev2->tt)
 		return 0;
@@ -227,68 +354,6 @@
 	}
 }
 
-/* How many of the tt's periodic downstream 1000 usecs are allocated?
- *
- * While this measures the bandwidth in terms of usecs/uframe,
- * the low/fullspeed bus has no notion of uframes, so any particular
- * low/fullspeed transfer can "carry over" from one uframe to the next,
- * since the TT just performs downstream transfers in sequence.
- *
- * For example two separate 100 usec transfers can start in the same uframe,
- * and the second one would "carry over" 75 usecs into the next uframe.
- */
-static void
-periodic_tt_usecs (
-	struct ehci_hcd *ehci,
-	struct usb_device *dev,
-	unsigned frame,
-	unsigned short tt_usecs[8]
-)
-{
-	__hc32			*hw_p = &ehci->periodic [frame];
-	union ehci_shadow	*q = &ehci->pshadow [frame];
-	unsigned char		uf;
-
-	memset(tt_usecs, 0, 16);
-
-	while (q->ptr) {
-		switch (hc32_to_cpu(ehci, Q_NEXT_TYPE(ehci, *hw_p))) {
-		case Q_TYPE_ITD:
-			hw_p = &q->itd->hw_next;
-			q = &q->itd->itd_next;
-			continue;
-		case Q_TYPE_QH:
-			if (same_tt(dev, q->qh->dev)) {
-				uf = tt_start_uframe(ehci, q->qh->hw->hw_info2);
-				tt_usecs[uf] += q->qh->tt_usecs;
-			}
-			hw_p = &q->qh->hw->hw_next;
-			q = &q->qh->qh_next;
-			continue;
-		case Q_TYPE_SITD:
-			if (same_tt(dev, q->sitd->urb->dev)) {
-				uf = tt_start_uframe(ehci, q->sitd->hw_uframe);
-				tt_usecs[uf] += q->sitd->stream->tt_usecs;
-			}
-			hw_p = &q->sitd->hw_next;
-			q = &q->sitd->sitd_next;
-			continue;
-		// case Q_TYPE_FSTN:
-		default:
-			ehci_dbg(ehci, "ignoring periodic frame %d FSTN\n",
-					frame);
-			hw_p = &q->fstn->hw_next;
-			q = &q->fstn->fstn_next;
-		}
-	}
-
-	carryover_tt_bandwidth(tt_usecs);
-
-	if (max_tt_usecs[7] < tt_usecs[7])
-		ehci_err(ehci, "frame %d tt sched overrun: %d usecs\n",
-			frame, tt_usecs[7] - max_tt_usecs[7]);
-}
-
 /*
  * Return true if the device's tt's downstream bus is available for a
  * periodic transfer of the specified length (usecs), starting at the
@@ -312,20 +377,29 @@
  */
 static int tt_available (
 	struct ehci_hcd		*ehci,
-	unsigned		period,
-	struct usb_device	*dev,
+	struct ehci_per_sched	*ps,
+	struct ehci_tt		*tt,
 	unsigned		frame,
-	unsigned		uframe,
-	u16			usecs
+	unsigned		uframe
 )
 {
+	unsigned		period = ps->bw_period;
+	unsigned		usecs = ps->tt_usecs;
+
 	if ((period == 0) || (uframe >= 7))	/* error */
 		return 0;
 
-	for (; frame < ehci->periodic_size; frame += period) {
-		unsigned short tt_usecs[8];
+	for (frame &= period - 1; frame < EHCI_BANDWIDTH_FRAMES;
+			frame += period) {
+		unsigned	i, uf;
+		unsigned short	tt_usecs[8];
 
-		periodic_tt_usecs (ehci, dev, frame, tt_usecs);
+		if (tt->bandwidth[frame] + usecs > 900)
+			return 0;
+
+		uf = frame << 3;
+		for (i = 0; i < 8; (++i, ++uf))
+			tt_usecs[i] = ehci->tt_budget[uf];
 
 		if (max_tt_usecs[uframe] <= tt_usecs[uframe])
 			return 0;
@@ -337,7 +411,7 @@
 		 */
 		if (125 < usecs) {
 			int ufs = (usecs / 125);
-			int i;
+
 			for (i = uframe; i < (uframe + ufs) && i < 8; i++)
 				if (0 < tt_usecs[i])
 					return 0;
@@ -391,7 +465,7 @@
 				continue;
 			case Q_TYPE_QH:
 				hw = here.qh->hw;
-				if (same_tt (dev, here.qh->dev)) {
+				if (same_tt(dev, here.qh->ps.udev)) {
 					u32		mask;
 
 					mask = hc32_to_cpu(ehci,
@@ -471,19 +545,19 @@
 static void qh_link_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
 	unsigned	i;
-	unsigned	period = qh->period;
+	unsigned	period = qh->ps.period;
 
-	dev_dbg (&qh->dev->dev,
+	dev_dbg(&qh->ps.udev->dev,
 		"link qh%d-%04x/%p start %d [%d/%d us]\n",
 		period, hc32_to_cpup(ehci, &qh->hw->hw_info2)
 			& (QH_CMASK | QH_SMASK),
-		qh, qh->start, qh->usecs, qh->c_usecs);
+		qh, qh->ps.phase, qh->ps.usecs, qh->ps.c_usecs);
 
 	/* high bandwidth, or otherwise every microframe */
 	if (period == 0)
 		period = 1;
 
-	for (i = qh->start; i < ehci->periodic_size; i += period) {
+	for (i = qh->ps.phase; i < ehci->periodic_size; i += period) {
 		union ehci_shadow	*prev = &ehci->pshadow[i];
 		__hc32			*hw_p = &ehci->periodic[i];
 		union ehci_shadow	here = *prev;
@@ -503,7 +577,7 @@
 		 * enables sharing interior tree nodes
 		 */
 		while (here.ptr && qh != here.qh) {
-			if (qh->period > here.qh->period)
+			if (qh->ps.period > here.qh->ps.period)
 				break;
 			prev = &here.qh->qh_next;
 			hw_p = &here.qh->hw->hw_next;
@@ -523,10 +597,10 @@
 	qh->xacterrs = 0;
 	qh->exception = 0;
 
-	/* update per-qh bandwidth for usbfs */
-	ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->period
-		? ((qh->usecs + qh->c_usecs) / qh->period)
-		: (qh->usecs * 8);
+	/* update per-qh bandwidth for debugfs */
+	ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->ps.bw_period
+		? ((qh->ps.usecs + qh->ps.c_usecs) / qh->ps.bw_period)
+		: (qh->ps.usecs * 8);
 
 	list_add(&qh->intr_node, &ehci->intr_qh_list);
 
@@ -556,22 +630,21 @@
 	 */
 
 	/* high bandwidth, or otherwise part of every microframe */
-	if ((period = qh->period) == 0)
-		period = 1;
+	period = qh->ps.period ? : 1;
 
-	for (i = qh->start; i < ehci->periodic_size; i += period)
+	for (i = qh->ps.phase; i < ehci->periodic_size; i += period)
 		periodic_unlink (ehci, i, qh);
 
-	/* update per-qh bandwidth for usbfs */
-	ehci_to_hcd(ehci)->self.bandwidth_allocated -= qh->period
-		? ((qh->usecs + qh->c_usecs) / qh->period)
-		: (qh->usecs * 8);
+	/* update per-qh bandwidth for debugfs */
+	ehci_to_hcd(ehci)->self.bandwidth_allocated -= qh->ps.bw_period
+		? ((qh->ps.usecs + qh->ps.c_usecs) / qh->ps.bw_period)
+		: (qh->ps.usecs * 8);
 
-	dev_dbg (&qh->dev->dev,
+	dev_dbg(&qh->ps.udev->dev,
 		"unlink qh%d-%04x/%p start %d [%d/%d us]\n",
-		qh->period,
+		qh->ps.period,
 		hc32_to_cpup(ehci, &qh->hw->hw_info2) & (QH_CMASK | QH_SMASK),
-		qh, qh->start, qh->usecs, qh->c_usecs);
+		qh, qh->ps.phase, qh->ps.usecs, qh->ps.c_usecs);
 
 	/* qh->qh_next still "live" to HC */
 	qh->qh_state = QH_STATE_UNLINK;
@@ -694,11 +767,9 @@
 	struct ehci_hcd *ehci,
 	unsigned	frame,
 	unsigned	uframe,
-	unsigned	period,
+	unsigned	uperiod,
 	unsigned	usecs
 ) {
-	int		claimed;
-
 	/* complete split running into next frame?
 	 * given FSTN support, we could sometimes check...
 	 */
@@ -708,25 +779,10 @@
 	/* convert "usecs we need" to "max already claimed" */
 	usecs = ehci->uframe_periodic_max - usecs;
 
-	/* we "know" 2 and 4 uframe intervals were rejected; so
-	 * for period 0, check _every_ microframe in the schedule.
-	 */
-	if (unlikely (period == 0)) {
-		do {
-			for (uframe = 0; uframe < 7; uframe++) {
-				claimed = periodic_usecs (ehci, frame, uframe);
-				if (claimed > usecs)
-					return 0;
-			}
-		} while ((frame += 1) < ehci->periodic_size);
-
-	/* just check the specified uframe, at that period */
-	} else {
-		do {
-			claimed = periodic_usecs (ehci, frame, uframe);
-			if (claimed > usecs)
-				return 0;
-		} while ((frame += period) < ehci->periodic_size);
+	for (uframe += frame << 3; uframe < EHCI_BANDWIDTH_SIZE;
+			uframe += uperiod) {
+		if (ehci->bandwidth[uframe] > usecs)
+			return 0;
 	}
 
 	// success!
@@ -737,40 +793,40 @@
 	struct ehci_hcd		*ehci,
 	unsigned		frame,
 	unsigned		uframe,
-	const struct ehci_qh	*qh,
-	__hc32			*c_maskp
+	struct ehci_qh		*qh,
+	unsigned		*c_maskp,
+	struct ehci_tt		*tt
 )
 {
 	int		retval = -ENOSPC;
 	u8		mask = 0;
 
-	if (qh->c_usecs && uframe >= 6)		/* FSTN territory? */
+	if (qh->ps.c_usecs && uframe >= 6)	/* FSTN territory? */
 		goto done;
 
-	if (!check_period (ehci, frame, uframe, qh->period, qh->usecs))
+	if (!check_period(ehci, frame, uframe, qh->ps.bw_uperiod, qh->ps.usecs))
 		goto done;
-	if (!qh->c_usecs) {
+	if (!qh->ps.c_usecs) {
 		retval = 0;
 		*c_maskp = 0;
 		goto done;
 	}
 
 #ifdef CONFIG_USB_EHCI_TT_NEWSCHED
-	if (tt_available (ehci, qh->period, qh->dev, frame, uframe,
-				qh->tt_usecs)) {
+	if (tt_available(ehci, &qh->ps, tt, frame, uframe)) {
 		unsigned i;
 
 		/* TODO : this may need FSTN for SSPLIT in uframe 5. */
-		for (i=uframe+1; i<8 && i<uframe+4; i++)
-			if (!check_period (ehci, frame, i,
-						qh->period, qh->c_usecs))
+		for (i = uframe+2; i < 8 && i <= uframe+4; i++)
+			if (!check_period(ehci, frame, i,
+					qh->ps.bw_uperiod, qh->ps.c_usecs))
 				goto done;
 			else
 				mask |= 1 << i;
 
 		retval = 0;
 
-		*c_maskp = cpu_to_hc32(ehci, mask << 8);
+		*c_maskp = mask;
 	}
 #else
 	/* Make sure this tt's buffer is also available for CSPLITs.
@@ -781,15 +837,15 @@
 	 * one smart pass...
 	 */
 	mask = 0x03 << (uframe + qh->gap_uf);
-	*c_maskp = cpu_to_hc32(ehci, mask << 8);
+	*c_maskp = mask;
 
 	mask |= 1 << uframe;
-	if (tt_no_collision (ehci, qh->period, qh->dev, frame, mask)) {
-		if (!check_period (ehci, frame, uframe + qh->gap_uf + 1,
-					qh->period, qh->c_usecs))
+	if (tt_no_collision(ehci, qh->ps.bw_period, qh->ps.udev, frame, mask)) {
+		if (!check_period(ehci, frame, uframe + qh->gap_uf + 1,
+				qh->ps.bw_uperiod, qh->ps.c_usecs))
 			goto done;
-		if (!check_period (ehci, frame, uframe + qh->gap_uf,
-					qh->period, qh->c_usecs))
+		if (!check_period(ehci, frame, uframe + qh->gap_uf,
+				qh->ps.bw_uperiod, qh->ps.c_usecs))
 			goto done;
 		retval = 0;
 	}
@@ -803,62 +859,67 @@
  */
 static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
-	int		status;
+	int		status = 0;
 	unsigned	uframe;
-	__hc32		c_mask;
-	unsigned	frame;		/* 0..(qh->period - 1), or NO_FRAME */
+	unsigned	c_mask;
 	struct ehci_qh_hw	*hw = qh->hw;
+	struct ehci_tt		*tt;
 
 	hw->hw_next = EHCI_LIST_END(ehci);
-	frame = qh->start;
 
 	/* reuse the previous schedule slots, if we can */
-	if (frame < qh->period) {
-		uframe = ffs(hc32_to_cpup(ehci, &hw->hw_info2) & QH_SMASK);
-		status = check_intr_schedule (ehci, frame, --uframe,
-				qh, &c_mask);
-	} else {
-		uframe = 0;
-		c_mask = 0;
-		status = -ENOSPC;
+	if (qh->ps.phase != NO_FRAME) {
+		ehci_dbg(ehci, "reused qh %p schedule\n", qh);
+		return 0;
 	}
 
+	uframe = 0;
+	c_mask = 0;
+	tt = find_tt(qh->ps.udev);
+	if (IS_ERR(tt)) {
+		status = PTR_ERR(tt);
+		goto done;
+	}
+	compute_tt_budget(ehci->tt_budget, tt);
+
 	/* else scan the schedule to find a group of slots such that all
 	 * uframes have enough periodic bandwidth available.
 	 */
-	if (status) {
-		/* "normal" case, uframing flexible except with splits */
-		if (qh->period) {
-			int		i;
+	/* "normal" case, uframing flexible except with splits */
+	if (qh->ps.bw_period) {
+		int		i;
+		unsigned	frame;
 
-			for (i = qh->period; status && i > 0; --i) {
-				frame = ++ehci->random_frame % qh->period;
-				for (uframe = 0; uframe < 8; uframe++) {
-					status = check_intr_schedule (ehci,
-							frame, uframe, qh,
-							&c_mask);
-					if (status == 0)
-						break;
-				}
+		for (i = qh->ps.bw_period; i > 0; --i) {
+			frame = ++ehci->random_frame & (qh->ps.bw_period - 1);
+			for (uframe = 0; uframe < 8; uframe++) {
+				status = check_intr_schedule(ehci,
+						frame, uframe, qh, &c_mask, tt);
+				if (status == 0)
+					goto got_it;
 			}
-
-		/* qh->period == 0 means every uframe */
-		} else {
-			frame = 0;
-			status = check_intr_schedule (ehci, 0, 0, qh, &c_mask);
 		}
-		if (status)
-			goto done;
-		qh->start = frame;
 
-		/* reset S-frame and (maybe) C-frame masks */
-		hw->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK));
-		hw->hw_info2 |= qh->period
-			? cpu_to_hc32(ehci, 1 << uframe)
-			: cpu_to_hc32(ehci, QH_SMASK);
-		hw->hw_info2 |= c_mask;
-	} else
-		ehci_dbg (ehci, "reused qh %p schedule\n", qh);
+	/* qh->ps.bw_period == 0 means every uframe */
+	} else {
+		status = check_intr_schedule(ehci, 0, 0, qh, &c_mask, tt);
+	}
+	if (status)
+		goto done;
+
+ got_it:
+	qh->ps.phase = (qh->ps.period ? ehci->random_frame &
+			(qh->ps.period - 1) : 0);
+	qh->ps.bw_phase = qh->ps.phase & (qh->ps.bw_period - 1);
+	qh->ps.phase_uf = uframe;
+	qh->ps.cs_mask = qh->ps.period ?
+			(c_mask << 8) | (1 << uframe) :
+			QH_SMASK;
+
+	/* reset S-frame and (maybe) C-frame masks */
+	hw->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK));
+	hw->hw_info2 |= cpu_to_hc32(ehci, qh->ps.cs_mask);
+	reserve_release_intr_bandwidth(ehci, qh, 1);
 
 done:
 	return status;
@@ -969,7 +1030,8 @@
 	if (likely (stream != NULL)) {
 		INIT_LIST_HEAD(&stream->td_list);
 		INIT_LIST_HEAD(&stream->free_list);
-		stream->next_uframe = -1;
+		stream->next_uframe = NO_FRAME;
+		stream->ps.phase = NO_FRAME;
 	}
 	return stream;
 }
@@ -978,25 +1040,24 @@
 iso_stream_init (
 	struct ehci_hcd		*ehci,
 	struct ehci_iso_stream	*stream,
-	struct usb_device	*dev,
-	int			pipe,
-	unsigned		interval
+	struct urb		*urb
 )
 {
 	static const u8 smask_out [] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f };
 
+	struct usb_device	*dev = urb->dev;
 	u32			buf1;
 	unsigned		epnum, maxp;
 	int			is_input;
-	long			bandwidth;
+	unsigned		tmp;
 
 	/*
 	 * this might be a "high bandwidth" highspeed endpoint,
 	 * as encoded in the ep descriptor's wMaxPacket field
 	 */
-	epnum = usb_pipeendpoint (pipe);
-	is_input = usb_pipein (pipe) ? USB_DIR_IN : 0;
-	maxp = usb_maxpacket(dev, pipe, !is_input);
+	epnum = usb_pipeendpoint(urb->pipe);
+	is_input = usb_pipein(urb->pipe) ? USB_DIR_IN : 0;
+	maxp = usb_endpoint_maxp(&urb->ep->desc);
 	if (is_input) {
 		buf1 = (1 << 11);
 	} else {
@@ -1020,9 +1081,19 @@
 		/* usbfs wants to report the average usecs per frame tied up
 		 * when transfers on this endpoint are scheduled ...
 		 */
-		stream->usecs = HS_USECS_ISO (maxp);
-		bandwidth = stream->usecs * 8;
-		bandwidth /= interval;
+		stream->ps.usecs = HS_USECS_ISO(maxp);
+
+		/* period for bandwidth allocation */
+		tmp = min_t(unsigned, EHCI_BANDWIDTH_SIZE,
+				1 << (urb->ep->desc.bInterval - 1));
+
+		/* Allow urb->interval to override */
+		stream->ps.bw_uperiod = min_t(unsigned, tmp, urb->interval);
+
+		stream->uperiod = urb->interval;
+		stream->ps.period = urb->interval >> 3;
+		stream->bandwidth = stream->ps.usecs * 8 /
+				stream->ps.bw_uperiod;
 
 	} else {
 		u32		addr;
@@ -1036,36 +1107,46 @@
 			addr |= dev->tt->hub->devnum << 16;
 		addr |= epnum << 8;
 		addr |= dev->devnum;
-		stream->usecs = HS_USECS_ISO (maxp);
+		stream->ps.usecs = HS_USECS_ISO(maxp);
 		think_time = dev->tt ? dev->tt->think_time : 0;
-		stream->tt_usecs = NS_TO_US (think_time + usb_calc_bus_time (
+		stream->ps.tt_usecs = NS_TO_US(think_time + usb_calc_bus_time(
 				dev->speed, is_input, 1, maxp));
 		hs_transfers = max (1u, (maxp + 187) / 188);
 		if (is_input) {
 			u32	tmp;
 
 			addr |= 1 << 31;
-			stream->c_usecs = stream->usecs;
-			stream->usecs = HS_USECS_ISO (1);
-			stream->raw_mask = 1;
+			stream->ps.c_usecs = stream->ps.usecs;
+			stream->ps.usecs = HS_USECS_ISO(1);
+			stream->ps.cs_mask = 1;
 
 			/* c-mask as specified in USB 2.0 11.18.4 3.c */
 			tmp = (1 << (hs_transfers + 2)) - 1;
-			stream->raw_mask |= tmp << (8 + 2);
+			stream->ps.cs_mask |= tmp << (8 + 2);
 		} else
-			stream->raw_mask = smask_out [hs_transfers - 1];
-		bandwidth = stream->usecs + stream->c_usecs;
-		bandwidth /= interval << 3;
+			stream->ps.cs_mask = smask_out[hs_transfers - 1];
 
-		/* stream->splits gets created from raw_mask later */
+		/* period for bandwidth allocation */
+		tmp = min_t(unsigned, EHCI_BANDWIDTH_FRAMES,
+				1 << (urb->ep->desc.bInterval - 1));
+
+		/* Allow urb->interval to override */
+		stream->ps.bw_period = min_t(unsigned, tmp, urb->interval);
+		stream->ps.bw_uperiod = stream->ps.bw_period << 3;
+
+		stream->ps.period = urb->interval;
+		stream->uperiod = urb->interval << 3;
+		stream->bandwidth = (stream->ps.usecs + stream->ps.c_usecs) /
+				stream->ps.bw_period;
+
+		/* stream->splits gets created from cs_mask later */
 		stream->address = cpu_to_hc32(ehci, addr);
 	}
-	stream->bandwidth = bandwidth;
 
-	stream->udev = dev;
+	stream->ps.udev = dev;
+	stream->ps.ep = urb->ep;
 
 	stream->bEndpointAddress = is_input | epnum;
-	stream->interval = interval;
 	stream->maxp = maxp;
 }
 
@@ -1090,9 +1171,7 @@
 		stream = iso_stream_alloc(GFP_ATOMIC);
 		if (likely (stream != NULL)) {
 			ep->hcpriv = stream;
-			stream->ep = ep;
-			iso_stream_init(ehci, stream, urb->dev, urb->pipe,
-					urb->interval);
+			iso_stream_init(ehci, stream, urb);
 		}
 
 	/* if dev->ep [epnum] is a QH, hw is set */
@@ -1137,7 +1216,7 @@
 	dma_addr_t	dma = urb->transfer_dma;
 
 	/* how many uframes are needed for these transfers */
-	iso_sched->span = urb->number_of_packets * stream->interval;
+	iso_sched->span = urb->number_of_packets * stream->uperiod;
 
 	/* figure out per-uframe itd fields that we'll need later
 	 * when we fit new itds into the schedule.
@@ -1236,7 +1315,7 @@
 
 		memset (itd, 0, sizeof *itd);
 		itd->itd_dma = itd_dma;
-		itd->frame = 9999;		/* an invalid value */
+		itd->frame = NO_FRAME;
 		list_add (&itd->itd_list, &sched->td_list);
 	}
 	spin_unlock_irqrestore (&ehci->lock, flags);
@@ -1249,49 +1328,106 @@
 
 /*-------------------------------------------------------------------------*/
 
+static void reserve_release_iso_bandwidth(struct ehci_hcd *ehci,
+		struct ehci_iso_stream *stream, int sign)
+{
+	unsigned		uframe;
+	unsigned		i, j;
+	unsigned		s_mask, c_mask, m;
+	int			usecs = stream->ps.usecs;
+	int			c_usecs = stream->ps.c_usecs;
+	int			tt_usecs = stream->ps.tt_usecs;
+	struct ehci_tt		*tt;
+
+	if (stream->ps.phase == NO_FRAME)	/* Bandwidth wasn't reserved */
+		return;
+	uframe = stream->ps.bw_phase << 3;
+
+	bandwidth_dbg(ehci, sign, "iso", &stream->ps);
+
+	if (sign < 0) {		/* Release bandwidth */
+		usecs = -usecs;
+		c_usecs = -c_usecs;
+		tt_usecs = -tt_usecs;
+	}
+
+	if (!stream->splits) {		/* High speed */
+		for (i = uframe + stream->ps.phase_uf; i < EHCI_BANDWIDTH_SIZE;
+				i += stream->ps.bw_uperiod)
+			ehci->bandwidth[i] += usecs;
+
+	} else {			/* Full speed */
+		s_mask = stream->ps.cs_mask;
+		c_mask = s_mask >> 8;
+
+		/* NOTE: adjustment needed for frame overflow */
+		for (i = uframe; i < EHCI_BANDWIDTH_SIZE;
+				i += stream->ps.bw_uperiod) {
+			for ((j = stream->ps.phase_uf, m = 1 << j); j < 8;
+					(++j, m <<= 1)) {
+				if (s_mask & m)
+					ehci->bandwidth[i+j] += usecs;
+				else if (c_mask & m)
+					ehci->bandwidth[i+j] += c_usecs;
+			}
+		}
+
+		tt = find_tt(stream->ps.udev);
+		if (sign > 0)
+			list_add_tail(&stream->ps.ps_list, &tt->ps_list);
+		else
+			list_del(&stream->ps.ps_list);
+
+		for (i = uframe >> 3; i < EHCI_BANDWIDTH_FRAMES;
+				i += stream->ps.bw_period)
+			tt->bandwidth[i] += tt_usecs;
+	}
+}
+
 static inline int
 itd_slot_ok (
 	struct ehci_hcd		*ehci,
-	u32			mod,
-	u32			uframe,
-	u8			usecs,
-	u32			period
+	struct ehci_iso_stream	*stream,
+	unsigned		uframe
 )
 {
-	uframe %= period;
-	do {
-		/* can't commit more than uframe_periodic_max usec */
-		if (periodic_usecs (ehci, uframe >> 3, uframe & 0x7)
-				> (ehci->uframe_periodic_max - usecs))
-			return 0;
+	unsigned		usecs;
 
-		/* we know urb->interval is 2^N uframes */
-		uframe += period;
-	} while (uframe < mod);
+	/* convert "usecs we need" to "max already claimed" */
+	usecs = ehci->uframe_periodic_max - stream->ps.usecs;
+
+	for (uframe &= stream->ps.bw_uperiod - 1; uframe < EHCI_BANDWIDTH_SIZE;
+			uframe += stream->ps.bw_uperiod) {
+		if (ehci->bandwidth[uframe] > usecs)
+			return 0;
+	}
 	return 1;
 }
 
 static inline int
 sitd_slot_ok (
 	struct ehci_hcd		*ehci,
-	u32			mod,
 	struct ehci_iso_stream	*stream,
-	u32			uframe,
+	unsigned		uframe,
 	struct ehci_iso_sched	*sched,
-	u32			period_uframes
+	struct ehci_tt		*tt
 )
 {
-	u32			mask, tmp;
-	u32			frame, uf;
+	unsigned		mask, tmp;
+	unsigned		frame, uf;
 
-	mask = stream->raw_mask << (uframe & 7);
+	mask = stream->ps.cs_mask << (uframe & 7);
+
+	/* for OUT, don't wrap SSPLIT into H-microframe 7 */
+	if (((stream->ps.cs_mask & 0xff) << (uframe & 7)) >= (1 << 7))
+		return 0;
 
 	/* for IN, don't wrap CSPLIT into the next frame */
 	if (mask & ~0xffff)
 		return 0;
 
 	/* check bandwidth */
-	uframe %= period_uframes;
+	uframe &= stream->ps.bw_uperiod - 1;
 	frame = uframe >> 3;
 
 #ifdef CONFIG_USB_EHCI_TT_NEWSCHED
@@ -1299,54 +1435,48 @@
 	 * tt_available scheduling guarantees 10+% for control/bulk.
 	 */
 	uf = uframe & 7;
-	if (!tt_available(ehci, period_uframes >> 3,
-			stream->udev, frame, uf, stream->tt_usecs))
+	if (!tt_available(ehci, &stream->ps, tt, frame, uf))
 		return 0;
 #else
 	/* tt must be idle for start(s), any gap, and csplit.
 	 * assume scheduling slop leaves 10+% for control/bulk.
 	 */
-	if (!tt_no_collision(ehci, period_uframes >> 3,
-			stream->udev, frame, mask))
+	if (!tt_no_collision(ehci, stream->ps.bw_period,
+			stream->ps.udev, frame, mask))
 		return 0;
 #endif
 
-	/* this multi-pass logic is simple, but performance may
-	 * suffer when the schedule data isn't cached.
-	 */
 	do {
-		u32		max_used;
-
-		frame = uframe >> 3;
-		uf = uframe & 7;
+		unsigned	max_used;
+		unsigned	i;
 
 		/* check starts (OUT uses more than one) */
-		max_used = ehci->uframe_periodic_max - stream->usecs;
-		for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) {
-			if (periodic_usecs (ehci, frame, uf) > max_used)
+		uf = uframe;
+		max_used = ehci->uframe_periodic_max - stream->ps.usecs;
+		for (tmp = stream->ps.cs_mask & 0xff; tmp; tmp >>= 1, uf++) {
+			if (ehci->bandwidth[uf] > max_used)
 				return 0;
 		}
 
 		/* for IN, check CSPLIT */
-		if (stream->c_usecs) {
-			uf = uframe & 7;
-			max_used = ehci->uframe_periodic_max - stream->c_usecs;
-			do {
-				tmp = 1 << uf;
-				tmp <<= 8;
-				if ((stream->raw_mask & tmp) == 0)
+		if (stream->ps.c_usecs) {
+			max_used = ehci->uframe_periodic_max -
+					stream->ps.c_usecs;
+			uf = uframe & ~7;
+			tmp = 1 << (2+8);
+			for (i = (uframe & 7) + 2; i < 8; (++i, tmp <<= 1)) {
+				if ((stream->ps.cs_mask & tmp) == 0)
 					continue;
-				if (periodic_usecs (ehci, frame, uf)
-						> max_used)
+				if (ehci->bandwidth[uf+i] > max_used)
 					return 0;
-			} while (++uf < 8);
+			}
 		}
 
-		/* we know urb->interval is 2^N uframes */
-		uframe += period_uframes;
-	} while (uframe < mod);
+		uframe += stream->ps.bw_uperiod;
+	} while (uframe < EHCI_BANDWIDTH_SIZE);
 
-	stream->splits = cpu_to_hc32(ehci, stream->raw_mask << (uframe & 7));
+	stream->ps.cs_mask <<= uframe & 7;
+	stream->splits = cpu_to_hc32(ehci, stream->ps.cs_mask);
 	return 1;
 }
 
@@ -1361,8 +1491,6 @@
  * given EHCI_TUNE_FLS and the slop).  Or, write a smarter scheduler!
  */
 
-#define SCHEDULING_DELAY	40	/* microframes */
-
 static int
 iso_stream_schedule (
 	struct ehci_hcd		*ehci,
@@ -1370,134 +1498,184 @@
 	struct ehci_iso_stream	*stream
 )
 {
-	u32			now, base, next, start, period, span;
-	int			status;
+	u32			now, base, next, start, period, span, now2;
+	u32			wrap = 0, skip = 0;
+	int			status = 0;
 	unsigned		mod = ehci->periodic_size << 3;
 	struct ehci_iso_sched	*sched = urb->hcpriv;
+	bool			empty = list_empty(&stream->td_list);
+	bool			new_stream = false;
 
-	period = urb->interval;
+	period = stream->uperiod;
 	span = sched->span;
-	if (!stream->highspeed) {
-		period <<= 3;
+	if (!stream->highspeed)
 		span <<= 3;
+
+	/* Start a new isochronous stream? */
+	if (unlikely(empty && !hcd_periodic_completion_in_progress(
+			ehci_to_hcd(ehci), urb->ep))) {
+
+		/* Schedule the endpoint */
+		if (stream->ps.phase == NO_FRAME) {
+			int		done = 0;
+			struct ehci_tt	*tt = find_tt(stream->ps.udev);
+
+			if (IS_ERR(tt)) {
+				status = PTR_ERR(tt);
+				goto fail;
+			}
+			compute_tt_budget(ehci->tt_budget, tt);
+
+			start = ((-(++ehci->random_frame)) << 3) & (period - 1);
+
+			/* find a uframe slot with enough bandwidth.
+			 * Early uframes are more precious because full-speed
+			 * iso IN transfers can't use late uframes,
+			 * and therefore they should be allocated last.
+			 */
+			next = start;
+			start += period;
+			do {
+				start--;
+				/* check schedule: enough space? */
+				if (stream->highspeed) {
+					if (itd_slot_ok(ehci, stream, start))
+						done = 1;
+				} else {
+					if ((start % 8) >= 6)
+						continue;
+					if (sitd_slot_ok(ehci, stream, start,
+							sched, tt))
+						done = 1;
+				}
+			} while (start > next && !done);
+
+			/* no room in the schedule */
+			if (!done) {
+				ehci_dbg(ehci, "iso sched full %p", urb);
+				status = -ENOSPC;
+				goto fail;
+			}
+			stream->ps.phase = (start >> 3) &
+					(stream->ps.period - 1);
+			stream->ps.bw_phase = stream->ps.phase &
+					(stream->ps.bw_period - 1);
+			stream->ps.phase_uf = start & 7;
+			reserve_release_iso_bandwidth(ehci, stream, 1);
+		}
+
+		/* New stream is already scheduled; use the upcoming slot */
+		else {
+			start = (stream->ps.phase << 3) + stream->ps.phase_uf;
+		}
+
+		stream->next_uframe = start;
+		new_stream = true;
 	}
 
 	now = ehci_read_frame_index(ehci) & (mod - 1);
 
-	/* Typical case: reuse current schedule, stream is still active.
+	/* Take the isochronous scheduling threshold into account */
+	if (ehci->i_thresh)
+		next = now + ehci->i_thresh;	/* uframe cache */
+	else
+		next = (now + 2 + 7) & ~0x07;	/* full frame cache */
+
+	/*
+	 * Use ehci->last_iso_frame as the base.  There can't be any
+	 * TDs scheduled for earlier than that.
+	 */
+	base = ehci->last_iso_frame << 3;
+	next = (next - base) & (mod - 1);
+	start = (stream->next_uframe - base) & (mod - 1);
+
+	if (unlikely(new_stream))
+		goto do_ASAP;
+
+	/*
+	 * Typical case: reuse current schedule, stream may still be active.
 	 * Hopefully there are no gaps from the host falling behind
 	 * (irq delays etc).  If there are, the behavior depends on
 	 * whether URB_ISO_ASAP is set.
 	 */
-	if (likely (!list_empty (&stream->td_list))) {
+	now2 = (now - base) & (mod - 1);
 
-		/* Take the isochronous scheduling threshold into account */
-		if (ehci->i_thresh)
-			next = now + ehci->i_thresh;	/* uframe cache */
-		else
-			next = (now + 2 + 7) & ~0x07;	/* full frame cache */
-
-		/*
-		 * Use ehci->last_iso_frame as the base.  There can't be any
-		 * TDs scheduled for earlier than that.
-		 */
-		base = ehci->last_iso_frame << 3;
-		next = (next - base) & (mod - 1);
-		start = (stream->next_uframe - base) & (mod - 1);
-
-		/* Is the schedule already full? */
-		if (unlikely(start < period)) {
-			ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n",
-					urb, stream->next_uframe, base,
-					period, mod);
-			status = -ENOSPC;
-			goto fail;
-		}
-
-		/* Behind the scheduling threshold? */
-		if (unlikely(start < next)) {
-			unsigned now2 = (now - base) & (mod - 1);
-
-			/* USB_ISO_ASAP: Round up to the first available slot */
-			if (urb->transfer_flags & URB_ISO_ASAP)
-				start += (next - start + period - 1) & -period;
-
-			/*
-			 * Not ASAP: Use the next slot in the stream,
-			 * no matter what.
-			 */
-			else if (start + span - period < now2) {
-				ehci_dbg(ehci, "iso underrun %p (%u+%u < %u)\n",
-						urb, start + base,
-						span - period, now2 + base);
-			}
-		}
-
-		start += base;
+	/* Is the schedule already full? */
+	if (unlikely(!empty && start < period)) {
+		ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n",
+				urb, stream->next_uframe, base, period, mod);
+		status = -ENOSPC;
+		goto fail;
 	}
 
-	/* need to schedule; when's the next (u)frame we could start?
-	 * this is bigger than ehci->i_thresh allows; scheduling itself
-	 * isn't free, the delay should handle reasonably slow cpus.  it
-	 * can also help high bandwidth if the dma and irq loads don't
-	 * jump until after the queue is primed.
-	 */
-	else {
-		int done = 0;
+	/* Is the next packet scheduled after the base time? */
+	if (likely(!empty || start <= now2 + period)) {
 
-		base = now & ~0x07;
-		start = base + SCHEDULING_DELAY;
+		/* URB_ISO_ASAP: make sure that start >= next */
+		if (unlikely(start < next &&
+				(urb->transfer_flags & URB_ISO_ASAP)))
+			goto do_ASAP;
 
-		/* find a uframe slot with enough bandwidth.
-		 * Early uframes are more precious because full-speed
-		 * iso IN transfers can't use late uframes,
-		 * and therefore they should be allocated last.
-		 */
-		next = start;
-		start += period;
-		do {
-			start--;
-			/* check schedule: enough space? */
-			if (stream->highspeed) {
-				if (itd_slot_ok(ehci, mod, start,
-						stream->usecs, period))
-					done = 1;
-			} else {
-				if ((start % 8) >= 6)
-					continue;
-				if (sitd_slot_ok(ehci, mod, stream,
-						start, sched, period))
-					done = 1;
-			}
-		} while (start > next && !done);
+		/* Otherwise use start, if it's not in the past */
+		if (likely(start >= now2))
+			goto use_start;
 
-		/* no room in the schedule */
-		if (!done) {
-			ehci_dbg(ehci, "iso sched full %p", urb);
-			status = -ENOSPC;
-			goto fail;
-		}
+	/* Otherwise we got an underrun while the queue was empty */
+	} else {
+		if (urb->transfer_flags & URB_ISO_ASAP)
+			goto do_ASAP;
+		wrap = mod;
+		now2 += mod;
 	}
 
+	/* How many uframes and packets do we need to skip? */
+	skip = (now2 - start + period - 1) & -period;
+	if (skip >= span) {		/* Entirely in the past? */
+		ehci_dbg(ehci, "iso underrun %p (%u+%u < %u) [%u]\n",
+				urb, start + base, span - period, now2 + base,
+				base);
+
+		/* Try to keep the last TD intact for scanning later */
+		skip = span - period;
+
+		/* Will it come before the current scan position? */
+		if (empty) {
+			skip = span;	/* Skip the entire URB */
+			status = 1;	/* and give it back immediately */
+			iso_sched_free(stream, sched);
+			sched = NULL;
+		}
+	}
+	urb->error_count = skip / period;
+	if (sched)
+		sched->first_packet = urb->error_count;
+	goto use_start;
+
+ do_ASAP:
+	/* Use the first slot after "next" */
+	start = next + ((start - next) & (period - 1));
+
+ use_start:
 	/* Tried to schedule too far into the future? */
-	if (unlikely(start - base + span - period >= mod)) {
+	if (unlikely(start + span - period >= mod + wrap)) {
 		ehci_dbg(ehci, "request %p would overflow (%u+%u >= %u)\n",
-				urb, start - base, span - period, mod);
+				urb, start, span - period, mod + wrap);
 		status = -EFBIG;
 		goto fail;
 	}
 
-	stream->next_uframe = start & (mod - 1);
+	start += base;
+	stream->next_uframe = (start + skip) & (mod - 1);
 
 	/* report high speed start in uframes; full speed, in frames */
-	urb->start_frame = stream->next_uframe;
+	urb->start_frame = start & (mod - 1);
 	if (!stream->highspeed)
 		urb->start_frame >>= 3;
 
 	/* Make sure scan_isoc() sees these */
 	if (ehci->isoc_count == 0)
 		ehci->last_iso_frame = now >> 3;
-	return 0;
+	return status;
 
  fail:
 	iso_sched_free(stream, sched);
@@ -1610,7 +1788,8 @@
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill iTDs uframe by uframe */
-	for (packet = 0, itd = NULL; packet < urb->number_of_packets; ) {
+	for (packet = iso_sched->first_packet, itd = NULL;
+			packet < urb->number_of_packets;) {
 		if (itd == NULL) {
 			/* ASSERT:  we have all necessary itds */
 			// BUG_ON (list_empty (&iso_sched->td_list));
@@ -1630,7 +1809,7 @@
 
 		itd_patch(ehci, itd, iso_sched, packet, uframe);
 
-		next_uframe += stream->interval;
+		next_uframe += stream->uperiod;
 		next_uframe &= mod - 1;
 		packet++;
 
@@ -1770,9 +1949,9 @@
 		ehci_dbg (ehci, "can't get iso stream\n");
 		return -ENOMEM;
 	}
-	if (unlikely (urb->interval != stream->interval)) {
+	if (unlikely(urb->interval != stream->uperiod)) {
 		ehci_dbg (ehci, "can't change iso interval %d --> %d\n",
-			stream->interval, urb->interval);
+			stream->uperiod, urb->interval);
 		goto done;
 	}
 
@@ -1804,10 +1983,14 @@
 	if (unlikely(status))
 		goto done_not_linked;
 	status = iso_stream_schedule(ehci, urb, stream);
-	if (likely (status == 0))
+	if (likely(status == 0)) {
 		itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
-	else
+	} else if (status > 0) {
+		status = 0;
+		ehci_urb_done(ehci, urb, 0);
+	} else {
 		usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+	}
  done_not_linked:
 	spin_unlock_irqrestore (&ehci->lock, flags);
  done:
@@ -1833,7 +2016,7 @@
 	dma_addr_t	dma = urb->transfer_dma;
 
 	/* how many frames are needed for these transfers */
-	iso_sched->span = urb->number_of_packets * stream->interval;
+	iso_sched->span = urb->number_of_packets * stream->ps.period;
 
 	/* figure out per-frame sitd fields that we'll need later
 	 * when we fit new sitds into the schedule.
@@ -1925,7 +2108,7 @@
 
 		memset (sitd, 0, sizeof *sitd);
 		sitd->sitd_dma = sitd_dma;
-		sitd->frame = 9999;		/* an invalid value */
+		sitd->frame = NO_FRAME;
 		list_add (&sitd->sitd_list, &iso_sched->td_list);
 	}
 
@@ -2008,7 +2191,7 @@
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill sITDs frame by frame */
-	for (packet = 0, sitd = NULL;
+	for (packet = sched->first_packet, sitd = NULL;
 			packet < urb->number_of_packets;
 			packet++) {
 
@@ -2027,7 +2210,7 @@
 		sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1),
 				sitd);
 
-		next_uframe += stream->interval << 3;
+		next_uframe += stream->uperiod;
 	}
 	stream->next_uframe = next_uframe & (mod - 1);
 
@@ -2146,9 +2329,9 @@
 		ehci_dbg (ehci, "can't get iso stream\n");
 		return -ENOMEM;
 	}
-	if (urb->interval != stream->interval) {
+	if (urb->interval != stream->ps.period) {
 		ehci_dbg (ehci, "can't change iso interval %d --> %d\n",
-			stream->interval, urb->interval);
+			stream->ps.period, urb->interval);
 		goto done;
 	}
 
@@ -2178,10 +2361,14 @@
 	if (unlikely(status))
 		goto done_not_linked;
 	status = iso_stream_schedule(ehci, urb, stream);
-	if (status == 0)
+	if (likely(status == 0)) {
 		sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
-	else
+	} else if (status > 0) {
+		status = 0;
+		ehci_urb_done(ehci, urb, 0);
+	} else {
 		usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+	}
  done_not_linked:
 	spin_unlock_irqrestore (&ehci->lock, flags);
  done:
@@ -2259,7 +2446,8 @@
 				    q.itd->hw_next != EHCI_LIST_END(ehci))
 					*hw_p = q.itd->hw_next;
 				else
-					*hw_p = ehci->dummy->qh_dma;
+					*hw_p = cpu_to_hc32(ehci,
+							ehci->dummy->qh_dma);
 				type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
 				wmb();
 				modified = itd_complete (ehci, q.itd);
@@ -2294,7 +2482,8 @@
 				    q.sitd->hw_next != EHCI_LIST_END(ehci))
 					*hw_p = q.sitd->hw_next;
 				else
-					*hw_p = ehci->dummy->qh_dma;
+					*hw_p = cpu_to_hc32(ehci,
+							ehci->dummy->qh_dma);
 				type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
 				wmb();
 				modified = sitd_complete (ehci, q.sitd);
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
index b2de52d..8a73449 100644
--- a/drivers/usb/host/ehci-sead3.c
+++ b/drivers/usb/host/ehci-sead3.c
@@ -55,7 +55,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
+	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 93e59a1..dc899eb 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -36,7 +36,7 @@
 	 * generic hardware linkage
 	 */
 	.irq				= ehci_irq,
-	.flags				= HCD_USB2 | HCD_MEMORY,
+	.flags				= HCD_USB2 | HCD_MEMORY | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c
index 14ced00..f6459df 100644
--- a/drivers/usb/host/ehci-sysfs.c
+++ b/drivers/usb/host/ehci-sysfs.c
@@ -97,8 +97,7 @@
 {
 	struct ehci_hcd		*ehci;
 	unsigned		uframe_periodic_max;
-	unsigned		frame, uframe;
-	unsigned short		allocated_max;
+	unsigned		uframe;
 	unsigned long		flags;
 	ssize_t			ret;
 
@@ -122,16 +121,14 @@
 
 	/*
 	 * for request to decrease max periodic bandwidth, we have to check
-	 * every microframe in the schedule to see whether the decrease is
-	 * possible.
+	 * to see whether the decrease is possible.
 	 */
 	if (uframe_periodic_max < ehci->uframe_periodic_max) {
-		allocated_max = 0;
+		u8		allocated_max = 0;
 
-		for (frame = 0; frame < ehci->periodic_size; ++frame)
-			for (uframe = 0; uframe < 7; ++uframe)
-				allocated_max = max(allocated_max,
-						    periodic_usecs (ehci, frame, uframe));
+		for (uframe = 0; uframe < EHCI_BANDWIDTH_SIZE; ++uframe)
+			allocated_max = max(allocated_max,
+					ehci->bandwidth[uframe]);
 
 		if (allocated_max > uframe_periodic_max) {
 			ehci_info(ehci,
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 78fa76d..e6d8e26 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -388,7 +388,7 @@
 
 	err = clk_prepare_enable(tegra->clk);
 	if (err)
-		goto cleanup_clk_get;
+		goto cleanup_hcd_create;
 
 	tegra_periph_reset_assert(tegra->clk);
 	udelay(1);
@@ -465,8 +465,6 @@
 	usb_phy_shutdown(hcd->phy);
 cleanup_clk_en:
 	clk_disable_unprepare(tegra->clk);
-cleanup_clk_get:
-	clk_put(tegra->clk);
 cleanup_hcd_create:
 	usb_put_hcd(hcd);
 	return err;
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
index cca4be9..67026ff 100644
--- a/drivers/usb/host/ehci-tilegx.c
+++ b/drivers/usb/host/ehci-tilegx.c
@@ -61,7 +61,7 @@
 	 * Generic hardware linkage.
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
+	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * Basic lifecycle operations.
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index 59e0e24..cdad843 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -11,13 +11,28 @@
  *
  */
 
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
 
 /* enable phy0 and phy1 for w90p910 */
 #define	ENPHY		(0x01<<8)
 #define PHY0_CTR	(0xA4)
 #define PHY1_CTR	(0xA8)
 
+#define DRIVER_DESC "EHCI w90x900 driver"
+
+static const char hcd_name[] = "ehci-w90x900 ";
+
+static struct hc_driver __read_mostly ehci_w90x900_hc_driver;
+
 static int usb_w90x900_probe(const struct hc_driver *driver,
 		      struct platform_device *pdev)
 {
@@ -90,8 +105,8 @@
 	return retval;
 }
 
-static
-void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+static void usb_w90x900_remove(struct usb_hcd *hcd,
+			struct platform_device *pdev)
 {
 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);
@@ -99,54 +114,6 @@
 	usb_put_hcd(hcd);
 }
 
-static const struct hc_driver ehci_w90x900_hc_driver = {
-	.description = hcd_name,
-	.product_desc = "Nuvoton w90x900 EHCI Host Controller",
-	.hcd_priv_size = sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq = ehci_irq,
-	.flags = HCD_USB2|HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset = ehci_setup,
-	.start = ehci_run,
-
-	.stop = ehci_stop,
-	.shutdown = ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue = ehci_urb_enqueue,
-	.urb_dequeue = ehci_urb_dequeue,
-	.endpoint_disable = ehci_endpoint_disable,
-	.endpoint_reset = ehci_endpoint_reset,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number = ehci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data = ehci_hub_status_data,
-	.hub_control = ehci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend = ehci_bus_suspend,
-	.bus_resume = ehci_bus_resume,
-#endif
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
-
-	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
 static int ehci_w90x900_probe(struct platform_device *pdev)
 {
 	if (usb_disabled())
@@ -173,7 +140,25 @@
 	},
 };
 
+static int __init ehci_w90X900_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ehci_init_driver(&ehci_w90x900_hc_driver, NULL);
+	return platform_driver_register(&ehci_hcd_w90x900_driver);
+}
+module_init(ehci_w90X900_init);
+
+static void __exit ehci_w90X900_cleanup(void)
+{
+	platform_driver_unregister(&ehci_hcd_w90x900_driver);
+}
+module_exit(ehci_w90X900_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
-MODULE_DESCRIPTION("w90p910 usb ehci driver!");
-MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:w90p910-ehci");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index eba962e..95979f9 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -79,7 +79,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
+	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 291db7d..e8f41c5 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -54,6 +54,28 @@
 	unsigned long		unlink;
 };
 
+/*
+ * Scheduling and budgeting information for periodic transfers, for both
+ * high-speed devices and full/low-speed devices lying behind a TT.
+ */
+struct ehci_per_sched {
+	struct usb_device	*udev;		/* access to the TT */
+	struct usb_host_endpoint *ep;
+	struct list_head	ps_list;	/* node on ehci_tt's ps_list */
+	u16			tt_usecs;	/* time on the FS/LS bus */
+	u16			cs_mask;	/* C-mask and S-mask bytes */
+	u16			period;		/* actual period in frames */
+	u16			phase;		/* actual phase, frame part */
+	u8			bw_phase;	/* same, for bandwidth
+						   reservation */
+	u8			phase_uf;	/* uframe part of the phase */
+	u8			usecs, c_usecs;	/* times on the HS bus */
+	u8			bw_uperiod;	/* period in microframes, for
+						   bandwidth reservation */
+	u8			bw_period;	/* same, in frames */
+};
+#define NO_FRAME	29999			/* frame not assigned yet */
+
 /* ehci_hcd->lock guards shared data against other CPUs:
  *   ehci_hcd:	async, unlink, periodic (and shadow), ...
  *   usb_host_endpoint: hcpriv
@@ -230,6 +252,15 @@
 	struct dentry		*debug_dir;
 #endif
 
+	/* bandwidth usage */
+#define EHCI_BANDWIDTH_SIZE	64
+#define EHCI_BANDWIDTH_FRAMES	(EHCI_BANDWIDTH_SIZE >> 3)
+	u8			bandwidth[EHCI_BANDWIDTH_SIZE];
+						/* us allocated per uframe */
+	u8			tt_budget[EHCI_BANDWIDTH_SIZE];
+						/* us budgeted per uframe */
+	struct list_head	tt_list;
+
 	/* platform-specific data -- must come last */
 	unsigned long		priv[0] __aligned(sizeof(s64));
 };
@@ -385,6 +416,7 @@
 	struct list_head	intr_node;	/* list of intr QHs */
 	struct ehci_qtd		*dummy;
 	struct list_head	unlink_node;
+	struct ehci_per_sched	ps;		/* scheduling info */
 
 	unsigned		unlink_cycle;
 
@@ -398,16 +430,8 @@
 	u8			xacterrs;	/* XactErr retry counter */
 #define	QH_XACTERR_MAX		32		/* XactErr retry limit */
 
-	/* periodic schedule info */
-	u8			usecs;		/* intr bandwidth */
 	u8			gap_uf;		/* uframes split/csplit gap */
-	u8			c_usecs;	/* ... split completion bw */
-	u16			tt_usecs;	/* tt downstream bandwidth */
-	unsigned short		period;		/* polling interval */
-	unsigned short		start;		/* where polling starts */
-#define NO_FRAME ((unsigned short)~0)			/* pick new start */
 
-	struct usb_device	*dev;		/* access to TT */
 	unsigned		is_out:1;	/* bulk or intr OUT */
 	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
 	unsigned		dequeue_during_giveback:1;
@@ -434,6 +458,7 @@
 struct ehci_iso_sched {
 	struct list_head	td_list;
 	unsigned		span;
+	unsigned		first_packet;
 	struct ehci_iso_packet	packet [0];
 };
 
@@ -449,22 +474,17 @@
 	u8			highspeed;
 	struct list_head	td_list;	/* queued itds/sitds */
 	struct list_head	free_list;	/* list of unused itds/sitds */
-	struct usb_device	*udev;
-	struct usb_host_endpoint *ep;
 
 	/* output of (re)scheduling */
-	int			next_uframe;
+	struct ehci_per_sched	ps;		/* scheduling info */
+	unsigned		next_uframe;
 	__hc32			splits;
 
 	/* the rest is derived from the endpoint descriptor,
-	 * trusting urb->interval == f(epdesc->bInterval) and
 	 * including the extra info for hw_bufp[0..2]
 	 */
-	u8			usecs, c_usecs;
-	u16			interval;
-	u16			tt_usecs;
+	u16			uperiod;	/* period in uframes */
 	u16			maxp;
-	u16			raw_mask;
 	unsigned		bandwidth;
 
 	/* This is used to initialize iTD's hw_bufp fields */
@@ -579,6 +599,35 @@
 
 /*-------------------------------------------------------------------------*/
 
+/*
+ * USB-2.0 Specification Sections 11.14 and 11.18
+ * Scheduling and budgeting split transactions using TTs
+ *
+ * A hub can have a single TT for all its ports, or multiple TTs (one for each
+ * port).  The bandwidth and budgeting information for the full/low-speed bus
+ * below each TT is self-contained and independent of the other TTs or the
+ * high-speed bus.
+ *
+ * "Bandwidth" refers to the number of microseconds on the FS/LS bus allocated
+ * to an interrupt or isochronous endpoint for each frame.  "Budget" refers to
+ * the best-case estimate of the number of full-speed bytes allocated to an
+ * endpoint for each microframe within an allocated frame.
+ *
+ * Removal of an endpoint invalidates a TT's budget.  Instead of trying to
+ * keep an up-to-date record, we recompute the budget when it is needed.
+ */
+
+struct ehci_tt {
+	u16			bandwidth[EHCI_BANDWIDTH_FRAMES];
+
+	struct list_head	tt_list;	/* List of all ehci_tt's */
+	struct list_head	ps_list;	/* Items using this TT */
+	struct usb_tt		*usb_tt;
+	int			tt_port;	/* TT port number */
+};
+
+/*-------------------------------------------------------------------------*/
+
 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
 
 #define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup)	\
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index fce13bc..55486bd 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -412,7 +412,7 @@
 			tmp = 'h'; break; \
 		default:		\
 			tmp = '?'; break; \
-		}; tmp; })
+		} tmp; })
 
 static inline char token_mark(struct fotg210_hcd *fotg210, __hc32 token)
 {
diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index 299253c..e1c6d85 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -402,7 +402,7 @@
 		case QH_LOW_SPEED:  tmp = 'l'; break; \
 		case QH_HIGH_SPEED: tmp = 'h'; break; \
 		default: tmp = '?'; break; \
-		}; tmp; })
+		} tmp; })
 
 static inline char token_mark(struct fusbh200_hcd *fusbh200, __hc32 token)
 {
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 5b86ffb..ada0a52 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -199,10 +199,14 @@
 {
 	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
 
-	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
-		usb_hcd, hwahc);
-	return -ENOSYS;
+	/*
+	 * We cannot query the HWA for the WUSB time since that requires sending
+	 * a synchronous URB and this function can be called in_interrupt.
+	 * Instead, query the USB frame number for our parent and use that.
+	 */
+	return usb_get_current_frame_number(wa->usb_dev);
 }
 
 static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
@@ -566,14 +570,10 @@
 		goto error;
 	}
 	wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
-	/* Make LE fields CPU order */
-	wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion);
-	wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes);
-	wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock);
-	if (wa_descr->bcdWAVersion > 0x0100)
+	if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100)
 		dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
-			 wa_descr->bcdWAVersion & 0xff00 >> 8,
-			 wa_descr->bcdWAVersion & 0x00ff);
+			 le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8,
+			 le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff);
 	result = 0;
 error:
 	return result;
@@ -679,7 +679,8 @@
 	/* nothing to do here so far... */
 }
 
-static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface)
+static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface,
+	kernel_ulong_t quirks)
 {
 	int result;
 	struct device *dev = &iface->dev;
@@ -724,7 +725,7 @@
 		dev_err(dev, "Can't create WUSB HC structures: %d\n", result);
 		goto error_wusbhc_create;
 	}
-	result = wa_create(&hwahc->wa, iface);
+	result = wa_create(&hwahc->wa, iface, quirks);
 	if (result < 0)
 		goto error_wa_create;
 	return 0;
@@ -780,7 +781,7 @@
 	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 	hwahc = container_of(wusbhc, struct hwahc, wusbhc);
 	hwahc_init(hwahc);
-	result = hwahc_create(hwahc, usb_iface);
+	result = hwahc_create(hwahc, usb_iface, id->driver_info);
 	if (result < 0) {
 		dev_err(dev, "Cannot initialize internals: %d\n", result);
 		goto error_hwahc_create;
@@ -824,6 +825,12 @@
 }
 
 static struct usb_device_id hwahc_id_table[] = {
+	/* Alereon 5310 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01),
+	  .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC },
+	/* Alereon 5611 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01),
+	  .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC },
 	/* FIXME: use class labels for this */
 	{ USB_INTERFACE_INFO(0xe0, 0x02, 0x01), },
 	{},
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 6f29aba..935a2dd 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2108,7 +2108,7 @@
 				   default:
 					   s = "?";
 					   break;
-				   };
+				   }
 				   s;}), ep->maxpacket) ;
 		list_for_each_entry(urb, &ep->hep->urb_list, urb_list) {
 			seq_printf(s, "  urb%p, %d/%d\n", urb,
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index caa3764..476b5a5 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -13,19 +13,24 @@
  */
 
 #include <linux/clk.h>
-#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/platform_device.h>
 #include <linux/platform_data/atmel.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
 #include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <mach/cpu.h>
 
-#ifndef CONFIG_ARCH_AT91
-#error "CONFIG_ARCH_AT91 must be defined."
-#endif
+
+#include "ohci.h"
 
 #define valid_port(index)	((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
 #define at91_for_each_port(index)	\
@@ -33,7 +38,17 @@
 
 /* interface, function and usb clocks; sometimes also an AHB clock */
 static struct clk *iclk, *fclk, *uclk, *hclk;
+/* interface and function clocks; sometimes also an AHB clock */
+
+#define DRIVER_DESC "OHCI Atmel driver"
+
+static const char hcd_name[] = "ohci-atmel";
+
+static struct hc_driver __read_mostly ohci_at91_hc_driver;
 static int clocked;
+static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
+			u16 wValue, u16 wIndex, char *buf, u16 wLength);
+static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
 
 extern int usb_disabled(void);
 
@@ -117,6 +132,8 @@
 static int usb_hcd_at91_probe(const struct hc_driver *driver,
 			struct platform_device *pdev)
 {
+	struct at91_usbh_data *board;
+	struct ohci_hcd *ohci;
 	int retval;
 	struct usb_hcd *hcd = NULL;
 
@@ -177,8 +194,10 @@
 		}
 	}
 
+	board = hcd->self.controller->platform_data;
+	ohci = hcd_to_ohci(hcd);
+	ohci->num_ports = board->ports;
 	at91_start_hc(pdev);
-	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
 	if (retval == 0)
@@ -238,36 +257,6 @@
 }
 
 /*-------------------------------------------------------------------------*/
-
-static int
-ohci_at91_reset (struct usb_hcd *hcd)
-{
-	struct at91_usbh_data	*board = dev_get_platdata(hcd->self.controller);
-	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
-	int			ret;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	ohci->num_ports = board->ports;
-	return 0;
-}
-
-static int
-ohci_at91_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
-	int			ret;
-
-	if ((ret = ohci_run(ohci)) < 0) {
-		dev_err(hcd->self.controller, "can't start %s\n",
-			hcd->self.bus_name);
-		ohci_stop(hcd);
-		return ret;
-	}
-	return 0;
-}
-
 static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
 {
 	if (!valid_port(port))
@@ -297,8 +286,8 @@
  */
 static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
 {
-	struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
-	int length = ohci_hub_status_data(hcd, buf);
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	int length = orig_ohci_hub_status_data(hcd, buf);
 	int port;
 
 	at91_for_each_port(port) {
@@ -376,7 +365,8 @@
 		break;
 	}
 
-	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
+	ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex + 1,
+				buf, wLength);
 	if (ret)
 		goto out;
 
@@ -430,51 +420,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static const struct hc_driver ohci_at91_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"AT91 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset =		ohci_at91_reset,
-	.start =		ohci_at91_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_at91_hub_status_data,
-	.hub_control =		ohci_at91_hub_control,
-#ifdef CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
 static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 {
 	struct platform_device *pdev = data;
@@ -703,7 +648,11 @@
 	 * REVISIT: some boards will be able to turn VBUS off...
 	 */
 	if (at91_suspend_entering_slow_clock()) {
-		ohci_usb_reset (ohci);
+		ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+		ohci->hc_control &= OHCI_CTRL_RWC;
+		ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
+		ohci->rh_state = OHCI_RH_HALTED;
+
 		/* flush the writes */
 		(void) ohci_readl (ohci, &ohci->regs->control);
 		at91_stop_clock();
@@ -730,8 +679,6 @@
 #define ohci_hcd_at91_drv_resume  NULL
 #endif
 
-MODULE_ALIAS("platform:at91_ohci");
-
 static struct platform_driver ohci_hcd_at91_driver = {
 	.probe		= ohci_hcd_at91_drv_probe,
 	.remove		= ohci_hcd_at91_drv_remove,
@@ -744,3 +691,40 @@
 		.of_match_table	= of_match_ptr(at91_ohci_dt_ids),
 	},
 };
+
+static int __init ohci_at91_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ohci_init_driver(&ohci_at91_hc_driver, NULL);
+
+	/*
+	 * The Atmel HW has some unusual quirks, which require Atmel-specific
+	 * workarounds. We override certain hc_driver functions here to
+	 * achieve that. We explicitly do not enhance ohci_driver_overrides to
+	 * allow this more easily, since this is an unusual case, and we don't
+	 * want to encourage others to override these functions by making it
+	 * too easy.
+	 */
+
+	orig_ohci_hub_control = ohci_at91_hc_driver.hub_control;
+	orig_ohci_hub_status_data = ohci_at91_hc_driver.hub_status_data;
+
+	ohci_at91_hc_driver.hub_status_data	= ohci_at91_hub_status_data;
+	ohci_at91_hc_driver.hub_control		= ohci_at91_hub_control;
+
+	return platform_driver_register(&ohci_hcd_at91_driver);
+}
+module_init(ohci_at91_init);
+
+static void __exit ohci_at91_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_at91_driver);
+}
+module_exit(ohci_at91_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_ohci");
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 31b81f9..3fca52e 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -17,7 +17,7 @@
 	case PIPE_BULK:		temp = "bulk"; break; \
 	case PIPE_INTERRUPT:	temp = "intr"; break; \
 	default:		temp = "isoc"; break; \
-	}; temp;})
+	} temp;})
 #define pipestring(pipe) edstring(usb_pipetype(pipe))
 
 /* debug| print the main components of an URB
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
deleted file mode 100644
index 84a20d5..0000000
--- a/drivers/usb/host/ohci-ep93xx.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for ep93xx.
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * Modified for pxa27x from ohci-lh7a404.c
- *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
- *
- * Modified for ep93xx from ohci-pxa27x.c
- *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
- *  Based on an earlier driver by Ray Lehtiniemi
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/signal.h>
-#include <linux/platform_device.h>
-
-static struct clk *usb_host_clock;
-
-static int ohci_ep93xx_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run(ohci)) < 0) {
-		dev_err(hcd->self.controller, "can't start %s\n",
-			hcd->self.bus_name);
-		ohci_stop(hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-static struct hc_driver ohci_ep93xx_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "EP93xx OHCI",
-	.hcd_priv_size		= sizeof(struct ohci_hcd),
-	.irq			= ohci_irq,
-	.flags			= HCD_USB11 | HCD_MEMORY,
-	.start			= ohci_ep93xx_start,
-	.stop			= ohci_stop,
-	.shutdown		= ohci_shutdown,
-	.urb_enqueue		= ohci_urb_enqueue,
-	.urb_dequeue		= ohci_urb_dequeue,
-	.endpoint_disable	= ohci_endpoint_disable,
-	.get_frame_number	= ohci_get_frame,
-	.hub_status_data	= ohci_hub_status_data,
-	.hub_control		= ohci_hub_control,
-#ifdef CONFIG_PM
-	.bus_suspend		= ohci_bus_suspend,
-	.bus_resume		= ohci_bus_resume,
-#endif
-	.start_port_reset	= ohci_start_port_reset,
-};
-
-static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd;
-	struct resource *res;
-	int irq;
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
-
-	hcd = usb_create_hcd(&ohci_ep93xx_hc_driver, &pdev->dev, "ep93xx");
-	if (!hcd)
-		return -ENOMEM;
-
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-
-	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(hcd->regs)) {
-		ret = PTR_ERR(hcd->regs);
-		goto err_put_hcd;
-	}
-
-	usb_host_clock = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(usb_host_clock)) {
-		ret = PTR_ERR(usb_host_clock);
-		goto err_put_hcd;
-	}
-
-	clk_enable(usb_host_clock);
-
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
-	ret = usb_add_hcd(hcd, irq, 0);
-	if (ret)
-		goto err_clk_disable;
-
-	return 0;
-
-err_clk_disable:
-	clk_disable(usb_host_clock);
-err_put_hcd:
-	usb_put_hcd(hcd);
-
-	return ret;
-}
-
-static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_remove_hcd(hcd);
-	clk_disable(usb_host_clock);
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
-	if (time_before(jiffies, ohci->next_statechange))
-		msleep(5);
-	ohci->next_statechange = jiffies;
-
-	clk_disable(usb_host_clock);
-	return 0;
-}
-
-static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
-	if (time_before(jiffies, ohci->next_statechange))
-		msleep(5);
-	ohci->next_statechange = jiffies;
-
-	clk_enable(usb_host_clock);
-
-	ohci_resume(hcd, false);
-	return 0;
-}
-#endif
-
-
-static struct platform_driver ohci_hcd_ep93xx_driver = {
-	.probe		= ohci_hcd_ep93xx_drv_probe,
-	.remove		= ohci_hcd_ep93xx_drv_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
-	.suspend	= ohci_hcd_ep93xx_drv_suspend,
-	.resume		= ohci_hcd_ep93xx_drv_resume,
-#endif
-	.driver		= {
-		.name	= "ep93xx-ohci",
-		.owner	= THIS_MODULE,
-	},
-};
-
-MODULE_ALIAS("platform:ep93xx-ohci");
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index dc6ee9a..a87baed 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -12,98 +12,55 @@
  */
 
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
 #include <linux/usb/phy.h>
 #include <linux/usb/samsung_usb_phy.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI EXYNOS driver"
+
+static const char hcd_name[] = "ohci-exynos";
+static struct hc_driver __read_mostly exynos_ohci_hc_driver;
+
+#define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
 
 struct exynos_ohci_hcd {
-	struct device *dev;
-	struct usb_hcd *hcd;
 	struct clk *clk;
 	struct usb_phy *phy;
 	struct usb_otg *otg;
-	struct exynos4_ohci_platdata *pdata;
 };
 
-static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci)
+static void exynos_ohci_phy_enable(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(exynos_ohci->dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
 
 	if (exynos_ohci->phy)
 		usb_phy_init(exynos_ohci->phy);
-	else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_init)
-		exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
 }
 
-static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci)
+static void exynos_ohci_phy_disable(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(exynos_ohci->dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
 
 	if (exynos_ohci->phy)
 		usb_phy_shutdown(exynos_ohci->phy);
-	else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_exit)
-		exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
 }
 
-static int ohci_exynos_reset(struct usb_hcd *hcd)
-{
-	return ohci_init(hcd_to_ohci(hcd));
-}
-
-static int ohci_exynos_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
-
-	ret = ohci_run(ohci);
-	if (ret < 0) {
-		dev_err(hcd->self.controller, "can't start %s\n",
-			hcd->self.bus_name);
-		ohci_stop(hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-static const struct hc_driver exynos_ohci_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "EXYNOS OHCI Host Controller",
-	.hcd_priv_size		= sizeof(struct ohci_hcd),
-
-	.irq			= ohci_irq,
-	.flags			= HCD_MEMORY|HCD_USB11,
-
-	.reset			= ohci_exynos_reset,
-	.start			= ohci_exynos_start,
-	.stop			= ohci_stop,
-	.shutdown		= ohci_shutdown,
-
-	.get_frame_number	= ohci_get_frame,
-
-	.urb_enqueue		= ohci_urb_enqueue,
-	.urb_dequeue		= ohci_urb_dequeue,
-	.endpoint_disable	= ohci_endpoint_disable,
-
-	.hub_status_data	= ohci_hub_status_data,
-	.hub_control		= ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend		= ohci_bus_suspend,
-	.bus_resume		= ohci_bus_resume,
-#endif
-	.start_port_reset	= ohci_start_port_reset,
-};
-
 static int exynos_ohci_probe(struct platform_device *pdev)
 {
-	struct exynos4_ohci_platdata *pdata = dev_get_platdata(&pdev->dev);
 	struct exynos_ohci_hcd *exynos_ohci;
 	struct usb_hcd *hcd;
-	struct ohci_hcd *ohci;
 	struct resource *res;
 	struct usb_phy *phy;
 	int irq;
@@ -119,10 +76,14 @@
 	if (!pdev->dev.coherent_dma_mask)
 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
-	exynos_ohci = devm_kzalloc(&pdev->dev, sizeof(struct exynos_ohci_hcd),
-					GFP_KERNEL);
-	if (!exynos_ohci)
+	hcd = usb_create_hcd(&exynos_ohci_hc_driver,
+				&pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
 		return -ENOMEM;
+	}
+
+	exynos_ohci = to_exynos_ohci(hcd);
 
 	if (of_device_is_compatible(pdev->dev.of_node,
 					"samsung,exynos5440-ohci"))
@@ -130,30 +91,15 @@
 
 	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
 	if (IS_ERR(phy)) {
-		/* Fallback to pdata */
-		if (!pdata) {
-			dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
-			return -EPROBE_DEFER;
-		} else {
-			exynos_ohci->pdata = pdata;
-		}
+		usb_put_hcd(hcd);
+		dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
+		return -EPROBE_DEFER;
 	} else {
 		exynos_ohci->phy = phy;
 		exynos_ohci->otg = phy->otg;
 	}
 
 skip_phy:
-
-	exynos_ohci->dev = &pdev->dev;
-
-	hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev,
-					dev_name(&pdev->dev));
-	if (!hcd) {
-		dev_err(&pdev->dev, "Unable to create HCD\n");
-		return -ENOMEM;
-	}
-
-	exynos_ohci->hcd = hcd;
 	exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
 
 	if (IS_ERR(exynos_ohci->clk)) {
@@ -190,26 +136,21 @@
 	}
 
 	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg,
-					&exynos_ohci->hcd->self);
+		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
 
-	exynos_ohci_phy_enable(exynos_ohci);
+	platform_set_drvdata(pdev, hcd);
 
-	ohci = hcd_to_ohci(hcd);
-	ohci_hcd_init(ohci);
+	exynos_ohci_phy_enable(pdev);
 
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add USB HCD\n");
 		goto fail_add_hcd;
 	}
-
-	platform_set_drvdata(pdev, exynos_ohci);
-
 	return 0;
 
 fail_add_hcd:
-	exynos_ohci_phy_disable(exynos_ohci);
+	exynos_ohci_phy_disable(pdev);
 fail_io:
 	clk_disable_unprepare(exynos_ohci->clk);
 fail_clk:
@@ -219,16 +160,15 @@
 
 static int exynos_ohci_remove(struct platform_device *pdev)
 {
-	struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = exynos_ohci->hcd;
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
 
 	usb_remove_hcd(hcd);
 
 	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg,
-					&exynos_ohci->hcd->self);
+		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
 
-	exynos_ohci_phy_disable(exynos_ohci);
+	exynos_ohci_phy_disable(pdev);
 
 	clk_disable_unprepare(exynos_ohci->clk);
 
@@ -239,8 +179,7 @@
 
 static void exynos_ohci_shutdown(struct platform_device *pdev)
 {
-	struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = exynos_ohci->hcd;
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	if (hcd->driver->shutdown)
 		hcd->driver->shutdown(hcd);
@@ -249,9 +188,10 @@
 #ifdef CONFIG_PM
 static int exynos_ohci_suspend(struct device *dev)
 {
-	struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
-	struct usb_hcd *hcd = exynos_ohci->hcd;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct platform_device *pdev = to_platform_device(dev);
 	unsigned long flags;
 	int rc = 0;
 
@@ -271,10 +211,9 @@
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg,
-					&exynos_ohci->hcd->self);
+		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
 
-	exynos_ohci_phy_disable(exynos_ohci);
+	exynos_ohci_phy_disable(pdev);
 
 	clk_disable_unprepare(exynos_ohci->clk);
 
@@ -286,16 +225,16 @@
 
 static int exynos_ohci_resume(struct device *dev)
 {
-	struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
-	struct usb_hcd *hcd = exynos_ohci->hcd;
+	struct usb_hcd *hcd			= dev_get_drvdata(dev);
+	struct exynos_ohci_hcd *exynos_ohci	= to_exynos_ohci(hcd);
+	struct platform_device *pdev		= to_platform_device(dev);
 
 	clk_prepare_enable(exynos_ohci->clk);
 
 	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg,
-					&exynos_ohci->hcd->self);
+		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
 
-	exynos_ohci_phy_enable(exynos_ohci);
+	exynos_ohci_phy_enable(pdev);
 
 	ohci_resume(hcd, false);
 
@@ -306,6 +245,10 @@
 #define exynos_ohci_resume	NULL
 #endif
 
+static const struct ohci_driver_overrides exynos_overrides __initconst = {
+	.extra_priv_size =	sizeof(struct exynos_ohci_hcd),
+};
+
 static const struct dev_pm_ops exynos_ohci_pm_ops = {
 	.suspend	= exynos_ohci_suspend,
 	.resume		= exynos_ohci_resume,
@@ -331,6 +274,23 @@
 		.of_match_table	= of_match_ptr(exynos_ohci_match),
 	}
 };
+static int __init ohci_exynos_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides);
+	return platform_driver_register(&exynos_ohci_driver);
+}
+module_init(ohci_exynos_init);
+
+static void __exit ohci_exynos_cleanup(void)
+{
+	platform_driver_unregister(&exynos_ohci_driver);
+}
+module_exit(ohci_exynos_cleanup);
 
 MODULE_ALIAS("platform:exynos-ohci");
 MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 604cad1..8ada13f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1161,10 +1161,12 @@
 	/* Copy the generic table to drv and then apply the overrides */
 	*drv = ohci_hc_driver;
 
-	drv->product_desc = over->product_desc;
-	drv->hcd_priv_size += over->extra_priv_size;
-	if (over->reset)
-		drv->reset = over->reset;
+	if (over) {
+		drv->product_desc = over->product_desc;
+		drv->hcd_priv_size += over->extra_priv_size;
+		if (over->reset)
+			drv->reset = over->reset;
+	}
 }
 EXPORT_SYMBOL_GPL(ohci_init_driver);
 
@@ -1179,46 +1181,6 @@
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
-#include "ohci-s3c2410.c"
-#define S3C2410_PLATFORM_DRIVER	ohci_hcd_s3c2410_driver
-#endif
-
-#ifdef CONFIG_USB_OHCI_EXYNOS
-#include "ohci-exynos.c"
-#define EXYNOS_PLATFORM_DRIVER	exynos_ohci_driver
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD_OMAP1
-#include "ohci-omap.c"
-#define OMAP1_PLATFORM_DRIVER	ohci_hcd_omap_driver
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD_OMAP3
-#include "ohci-omap3.c"
-#define OMAP3_PLATFORM_DRIVER	ohci_hcd_omap3_driver
-#endif
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#include "ohci-pxa27x.c"
-#define PLATFORM_DRIVER		ohci_hcd_pxa27x_driver
-#endif
-
-#ifdef CONFIG_ARCH_EP93XX
-#include "ohci-ep93xx.c"
-#define EP93XX_PLATFORM_DRIVER	ohci_hcd_ep93xx_driver
-#endif
-
-#ifdef CONFIG_ARCH_AT91
-#include "ohci-at91.c"
-#define AT91_PLATFORM_DRIVER	ohci_hcd_at91_driver
-#endif
-
-#ifdef CONFIG_ARCH_LPC32XX
-#include "ohci-nxp.c"
-#define NXP_PLATFORM_DRIVER	usb_hcd_nxp_driver
-#endif
-
 #ifdef CONFIG_ARCH_DAVINCI_DA8XX
 #include "ohci-da8xx.c"
 #define DAVINCI_PLATFORM_DRIVER	ohci_hcd_da8xx_driver
@@ -1229,11 +1191,6 @@
 #define OF_PLATFORM_DRIVER	ohci_hcd_ppc_of_driver
 #endif
 
-#ifdef CONFIG_PLAT_SPEAR
-#include "ohci-spear.c"
-#define SPEAR_PLATFORM_DRIVER	spear_ohci_hcd_driver
-#endif
-
 #ifdef CONFIG_PPC_PS3
 #include "ohci-ps3.c"
 #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
@@ -1296,18 +1253,6 @@
 		goto error_platform;
 #endif
 
-#ifdef OMAP1_PLATFORM_DRIVER
-	retval = platform_driver_register(&OMAP1_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_omap1_platform;
-#endif
-
-#ifdef OMAP3_PLATFORM_DRIVER
-	retval = platform_driver_register(&OMAP3_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_omap3_platform;
-#endif
-
 #ifdef OF_PLATFORM_DRIVER
 	retval = platform_driver_register(&OF_PLATFORM_DRIVER);
 	if (retval < 0)
@@ -1332,79 +1277,19 @@
 		goto error_tmio;
 #endif
 
-#ifdef S3C2410_PLATFORM_DRIVER
-	retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_s3c2410;
-#endif
-
-#ifdef EXYNOS_PLATFORM_DRIVER
-	retval = platform_driver_register(&EXYNOS_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_exynos;
-#endif
-
-#ifdef EP93XX_PLATFORM_DRIVER
-	retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_ep93xx;
-#endif
-
-#ifdef AT91_PLATFORM_DRIVER
-	retval = platform_driver_register(&AT91_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_at91;
-#endif
-
-#ifdef NXP_PLATFORM_DRIVER
-	retval = platform_driver_register(&NXP_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_nxp;
-#endif
-
 #ifdef DAVINCI_PLATFORM_DRIVER
 	retval = platform_driver_register(&DAVINCI_PLATFORM_DRIVER);
 	if (retval < 0)
 		goto error_davinci;
 #endif
 
-#ifdef SPEAR_PLATFORM_DRIVER
-	retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_spear;
-#endif
-
 	return retval;
 
 	/* Error path */
-#ifdef SPEAR_PLATFORM_DRIVER
-	platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
- error_spear:
-#endif
 #ifdef DAVINCI_PLATFORM_DRIVER
 	platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
  error_davinci:
 #endif
-#ifdef NXP_PLATFORM_DRIVER
-	platform_driver_unregister(&NXP_PLATFORM_DRIVER);
- error_nxp:
-#endif
-#ifdef AT91_PLATFORM_DRIVER
-	platform_driver_unregister(&AT91_PLATFORM_DRIVER);
- error_at91:
-#endif
-#ifdef EP93XX_PLATFORM_DRIVER
-	platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
- error_ep93xx:
-#endif
-#ifdef EXYNOS_PLATFORM_DRIVER
-	platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER);
- error_exynos:
-#endif
-#ifdef S3C2410_PLATFORM_DRIVER
-	platform_driver_unregister(&S3C2410_PLATFORM_DRIVER);
- error_s3c2410:
-#endif
 #ifdef TMIO_OHCI_DRIVER
 	platform_driver_unregister(&TMIO_OHCI_DRIVER);
  error_tmio:
@@ -1421,14 +1306,6 @@
 	platform_driver_unregister(&OF_PLATFORM_DRIVER);
  error_of_platform:
 #endif
-#ifdef OMAP3_PLATFORM_DRIVER
-	platform_driver_unregister(&OMAP3_PLATFORM_DRIVER);
- error_omap3_platform:
-#endif
-#ifdef OMAP1_PLATFORM_DRIVER
-	platform_driver_unregister(&OMAP1_PLATFORM_DRIVER);
- error_omap1_platform:
-#endif
 #ifdef PLATFORM_DRIVER
 	platform_driver_unregister(&PLATFORM_DRIVER);
  error_platform:
@@ -1450,27 +1327,9 @@
 
 static void __exit ohci_hcd_mod_exit(void)
 {
-#ifdef SPEAR_PLATFORM_DRIVER
-	platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
-#endif
 #ifdef DAVINCI_PLATFORM_DRIVER
 	platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
 #endif
-#ifdef NXP_PLATFORM_DRIVER
-	platform_driver_unregister(&NXP_PLATFORM_DRIVER);
-#endif
-#ifdef AT91_PLATFORM_DRIVER
-	platform_driver_unregister(&AT91_PLATFORM_DRIVER);
-#endif
-#ifdef EP93XX_PLATFORM_DRIVER
-	platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
-#endif
-#ifdef EXYNOS_PLATFORM_DRIVER
-	platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER);
-#endif
-#ifdef S3C2410_PLATFORM_DRIVER
-	platform_driver_unregister(&S3C2410_PLATFORM_DRIVER);
-#endif
 #ifdef TMIO_OHCI_DRIVER
 	platform_driver_unregister(&TMIO_OHCI_DRIVER);
 #endif
@@ -1483,12 +1342,6 @@
 #ifdef OF_PLATFORM_DRIVER
 	platform_driver_unregister(&OF_PLATFORM_DRIVER);
 #endif
-#ifdef OMAP3_PLATFORM_DRIVER
-	platform_driver_unregister(&OMAP3_PLATFORM_DRIVER);
-#endif
-#ifdef OMAP1_PLATFORM_DRIVER
-	platform_driver_unregister(&OMAP1_PLATFORM_DRIVER);
-#endif
 #ifdef PLATFORM_DRIVER
 	platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2347ab8..61705a7 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -212,10 +212,11 @@
 	/* Sometimes PCI D3 suspend trashes frame timings ... */
 	periodic_reinit (ohci);
 
-	/* the following code is executed with ohci->lock held and
-	 * irqs disabled if and only if autostopped is true
+	/*
+	 * The following code is executed with ohci->lock held and
+	 * irqs disabled if and only if autostopped is true.  This
+	 * will cause sparse to warn about a "context imbalance".
 	 */
-
 skip_resume:
 	/* interrupts might have been disabled */
 	ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
@@ -531,7 +532,7 @@
 	    temp |= 0x0010;
 	else if (rh & RH_A_OCPM)	/* per-port overcurrent reporting? */
 	    temp |= 0x0008;
-	desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp);
+	desc->wHubCharacteristics = cpu_to_le16(temp);
 
 	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 	rh = roothub_b (ohci);
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 7d7d507..9ab7e24 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -19,10 +19,19 @@
  * or implied.
  */
 #include <linux/clk.h>
-#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/platform_device.h>
 #include <linux/usb/isp1301.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -57,6 +66,11 @@
 #define start_int_umask(irq)
 #endif
 
+#define DRIVER_DESC "OHCI NXP driver"
+
+static const char hcd_name[] = "ohci-nxp";
+static struct hc_driver __read_mostly ohci_nxp_hc_driver;
+
 static struct i2c_client *isp1301_i2c_client;
 
 extern int usb_disabled(void);
@@ -132,14 +146,14 @@
 		OTG1_VBUS_DRV);
 }
 
-static void nxp_start_hc(void)
+static void ohci_nxp_start_hc(void)
 {
 	unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
 	__raw_writel(tmp, USB_OTG_STAT_CONTROL);
 	isp1301_vbus_on();
 }
 
-static void nxp_stop_hc(void)
+static void ohci_nxp_stop_hc(void)
 {
 	unsigned long tmp;
 	isp1301_vbus_off();
@@ -147,68 +161,9 @@
 	__raw_writel(tmp, USB_OTG_STAT_CONTROL);
 }
 
-static int ohci_nxp_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run(ohci)) < 0) {
-		dev_err(hcd->self.controller, "can't start\n");
-		ohci_stop(hcd);
-		return ret;
-	}
-	return 0;
-}
-
-static const struct hc_driver ohci_nxp_hc_driver = {
-	.description = hcd_name,
-	.product_desc =		"nxp OHCI",
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq = ohci_irq,
-	.flags = HCD_USB11 | HCD_MEMORY,
-
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-	/*
-	 * basic lifecycle operations
-	 */
-	.start = ohci_nxp_start,
-	.stop = ohci_stop,
-	.shutdown = ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue = ohci_urb_enqueue,
-	.urb_dequeue = ohci_urb_dequeue,
-	.endpoint_disable = ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number = ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data = ohci_hub_status_data,
-	.hub_control = ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend = ohci_bus_suspend,
-	.bus_resume = ohci_bus_resume,
-#endif
-	.start_port_reset = ohci_start_port_reset,
-};
-
-static int usb_hcd_nxp_probe(struct platform_device *pdev)
+static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = 0;
-	struct ohci_hcd *ohci;
 	const struct hc_driver *driver = &ohci_nxp_hc_driver;
 	struct resource *res;
 	int ret = 0, irq;
@@ -313,17 +268,15 @@
 		goto fail_resource;
 	}
 
-	nxp_start_hc();
+	ohci_nxp_start_hc();
 	platform_set_drvdata(pdev, hcd);
-	ohci = hcd_to_ohci(hcd);
-	ohci_hcd_init(ohci);
 
 	dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
 	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret == 0)
 		return ret;
 
-	nxp_stop_hc();
+	ohci_nxp_stop_hc();
 fail_resource:
 	usb_put_hcd(hcd);
 fail_hcd:
@@ -345,12 +298,12 @@
 	return ret;
 }
 
-static int usb_hcd_nxp_remove(struct platform_device *pdev)
+static int ohci_hcd_nxp_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_remove_hcd(hcd);
-	nxp_stop_hc();
+	ohci_nxp_stop_hc();
 	usb_put_hcd(hcd);
 	clk_disable(usb_pll_clk);
 	clk_put(usb_pll_clk);
@@ -366,20 +319,40 @@
 MODULE_ALIAS("platform:usb-ohci");
 
 #ifdef CONFIG_OF
-static const struct of_device_id usb_hcd_nxp_match[] = {
+static const struct of_device_id ohci_hcd_nxp_match[] = {
 	{ .compatible = "nxp,ohci-nxp" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, usb_hcd_nxp_match);
+MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
 #endif
 
-static struct platform_driver usb_hcd_nxp_driver = {
+static struct platform_driver ohci_hcd_nxp_driver = {
 	.driver = {
 		.name = "usb-ohci",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(usb_hcd_nxp_match),
+		.of_match_table = of_match_ptr(ohci_hcd_nxp_match),
 	},
-	.probe = usb_hcd_nxp_probe,
-	.remove = usb_hcd_nxp_remove,
+	.probe = ohci_hcd_nxp_probe,
+	.remove = ohci_hcd_nxp_remove,
 };
 
+static int __init ohci_nxp_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ohci_init_driver(&ohci_nxp_hc_driver, NULL);
+	return platform_driver_register(&ohci_hcd_nxp_driver);
+}
+module_init(ohci_nxp_init);
+
+static void __exit ohci_nxp_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_nxp_driver);
+}
+module_exit(ohci_nxp_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 31d3a12..f253214 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -14,12 +14,21 @@
  * This file is licenced under the GPL.
  */
 
-#include <linux/signal.h>
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
@@ -42,10 +51,7 @@
 #define OMAP1510_LB_MMU_RAM_H	0xfffec234
 #define OMAP1510_LB_MMU_RAM_L	0xfffec238
 
-
-#ifndef CONFIG_ARCH_OMAP
-#error "This file is OMAP bus glue.  CONFIG_OMAP must be defined."
-#endif
+#define DRIVER_DESC "OHCI OMAP driver"
 
 #ifdef CONFIG_TPS65010
 #include <linux/i2c/tps65010.h>
@@ -68,8 +74,9 @@
 
 static struct clk *usb_host_ck;
 static struct clk *usb_dc_ck;
-static int host_enabled;
-static int host_initialized;
+
+static const char hcd_name[] = "ohci-omap";
+static struct hc_driver __read_mostly ohci_omap_hc_driver;
 
 static void omap_ohci_clock_power(int on)
 {
@@ -188,7 +195,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int ohci_omap_init(struct usb_hcd *hcd)
+static int ohci_omap_reset(struct usb_hcd *hcd)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
 	struct omap_usb_config	*config = dev_get_platdata(hcd->self.controller);
@@ -198,9 +205,9 @@
 	dev_dbg(hcd->self.controller, "starting USB Controller\n");
 
 	if (config->otg) {
-		ohci_to_hcd(ohci)->self.otg_port = config->otg;
+		hcd->self.otg_port = config->otg;
 		/* default/minimum OTG power budget:  8 mA */
-		ohci_to_hcd(ohci)->power_budget = 8;
+		hcd->power_budget = 8;
 	}
 
 	/* boards can use OTG transceivers in non-OTG modes */
@@ -238,9 +245,15 @@
 		omap_1510_local_bus_init();
 	}
 
-	if ((ret = ohci_init(ohci)) < 0)
+	ret = ohci_setup(hcd);
+	if (ret < 0)
 		return ret;
 
+	if (config->otg || config->rwc) {
+		ohci->hc_control = OHCI_CTRL_RWC;
+		writel(OHCI_CTRL_RWC, &ohci->regs->control);
+	}
+
 	/* board-specific power switching and overcurrent support */
 	if (machine_is_omap_osk() || machine_is_omap_innovator()) {
 		u32	rh = roothub_a (ohci);
@@ -281,14 +294,6 @@
 	return 0;
 }
 
-static void ohci_omap_stop(struct usb_hcd *hcd)
-{
-	dev_dbg(hcd->self.controller, "stopping USB Controller\n");
-	ohci_stop(hcd);
-	omap_ohci_clock_power(0);
-}
-
-
 /*-------------------------------------------------------------------------*/
 
 /**
@@ -304,7 +309,6 @@
 {
 	int retval, irq;
 	struct usb_hcd *hcd = 0;
-	struct ohci_hcd *ohci;
 
 	if (pdev->num_resources != 2) {
 		printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
@@ -354,12 +358,6 @@
 		goto err2;
 	}
 
-	ohci = hcd_to_ohci(hcd);
-	ohci_hcd_init(ohci);
-
-	host_initialized = 0;
-	host_enabled = 1;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		retval = -ENXIO;
@@ -369,11 +367,6 @@
 	if (retval)
 		goto err3;
 
-	host_initialized = 1;
-
-	if (!host_enabled)
-		omap_ohci_clock_power(0);
-
 	return 0;
 err3:
 	iounmap(hcd->regs);
@@ -402,7 +395,9 @@
 static inline void
 usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 {
+	dev_dbg(hcd->self.controller, "stopping USB Controller\n");
 	usb_remove_hcd(hcd);
+	omap_ohci_clock_power(0);
 	if (!IS_ERR_OR_NULL(hcd->phy)) {
 		(void) otg_set_host(hcd->phy->otg, 0);
 		usb_put_phy(hcd->phy);
@@ -418,76 +413,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int
-ohci_omap_start (struct usb_hcd *hcd)
-{
-	struct omap_usb_config *config;
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	if (!host_enabled)
-		return 0;
-	config = dev_get_platdata(hcd->self.controller);
-	if (config->otg || config->rwc) {
-		ohci->hc_control = OHCI_CTRL_RWC;
-		writel(OHCI_CTRL_RWC, &ohci->regs->control);
-	}
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		dev_err(hcd->self.controller, "can't start\n");
-		ohci_stop (hcd);
-		return ret;
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_omap_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"OMAP OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset =		ohci_omap_init,
-	.start =		ohci_omap_start,
-	.stop =			ohci_omap_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
 static int ohci_hcd_omap_drv_probe(struct platform_device *dev)
 {
 	return usb_hcd_omap_probe(&ohci_omap_hc_driver, dev);
@@ -506,16 +431,23 @@
 
 #ifdef	CONFIG_PM
 
-static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message)
+static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message)
 {
-	struct ohci_hcd	*ohci = hcd_to_ohci(platform_get_drvdata(dev));
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(&pdev->dev);
+	int ret;
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;
 
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
 	omap_ohci_clock_power(0);
-	return 0;
+	return ret;
 }
 
 static int ohci_omap_resume(struct platform_device *dev)
@@ -553,4 +485,29 @@
 	},
 };
 
+static const struct ohci_driver_overrides omap_overrides __initconst = {
+	.product_desc	= "OMAP OHCI",
+	.reset		= ohci_omap_reset
+};
+
+static int __init ohci_omap_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides);
+	return platform_driver_register(&ohci_hcd_omap_driver);
+}
+module_init(ohci_omap_init);
+
+static void __exit ohci_omap_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_omap_driver);
+}
+module_exit(ohci_omap_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_ALIAS("platform:ohci");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index a09af26..408d06a 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -29,90 +29,22 @@
  *	- add kernel-doc
  */
 
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/otg.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/dma-mapping.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
-/*-------------------------------------------------------------------------*/
+#include "ohci.h"
 
-static int ohci_omap3_init(struct usb_hcd *hcd)
-{
-	dev_dbg(hcd->self.controller, "starting OHCI controller\n");
+#define DRIVER_DESC "OHCI OMAP3 driver"
 
-	return ohci_init(hcd_to_ohci(hcd));
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_omap3_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	/*
-	 * RemoteWakeupConnected has to be set explicitly before
-	 * calling ohci_run. The reset value of RWC is 0.
-	 */
-	ohci->hc_control = OHCI_CTRL_RWC;
-	writel(OHCI_CTRL_RWC, &ohci->regs->control);
-
-	ret = ohci_run(ohci);
-
-	if (ret < 0) {
-		dev_err(hcd->self.controller, "can't start\n");
-		ohci_stop(hcd);
-	}
-
-	return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_omap3_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"OMAP3 OHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset =		ohci_omap3_init,
-	.start =		ohci_omap3_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
+static const char hcd_name[] = "ohci-omap3";
+static struct hc_driver __read_mostly ohci_omap3_hc_driver;
 
 /*
  * configure so an HC device and id are always provided
@@ -129,6 +61,7 @@
 static int ohci_hcd_omap3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
+	struct ohci_hcd		*ohci;
 	struct usb_hcd		*hcd = NULL;
 	void __iomem		*regs = NULL;
 	struct resource		*res;
@@ -185,7 +118,12 @@
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-	ohci_hcd_init(hcd_to_ohci(hcd));
+	ohci = hcd_to_ohci(hcd);
+	/*
+	 * RemoteWakeupConnected has to be set explicitly before
+	 * calling ohci_run. The reset value of RWC is 0.
+	 */
+	ohci->hc_control = OHCI_CTRL_RWC;
 
 	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret) {
@@ -248,5 +186,25 @@
 	},
 };
 
+static int __init ohci_omap3_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ohci_init_driver(&ohci_omap3_hc_driver, NULL);
+	return platform_driver_register(&ohci_hcd_omap3_driver);
+}
+module_init(ohci_omap3_init);
+
+static void __exit ohci_omap3_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_omap3_driver);
+}
+module_exit(ohci_omap3_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_ALIAS("platform:ohci-omap3");
 MODULE_AUTHOR("Anand Gadiyar <gadiyar@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index ec337c2..90879e9 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -150,28 +150,16 @@
 static int ohci_quirk_amd700(struct usb_hcd *hcd)
 {
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	struct pci_dev *amd_smbus_dev;
-	u8 rev;
 
 	if (usb_amd_find_chipset_info())
 		ohci->flags |= OHCI_QUIRK_AMD_PLL;
 
-	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
-			PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
-	if (!amd_smbus_dev)
-		return 0;
-
-	rev = amd_smbus_dev->revision;
-
 	/* SB800 needs pre-fetch fix */
-	if ((rev >= 0x40) && (rev <= 0x4f)) {
+	if (usb_amd_prefetch_quirk()) {
 		ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
 		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
 	}
 
-	pci_dev_put(amd_smbus_dev);
-	amd_smbus_dev = NULL;
-
 	return 0;
 }
 
@@ -323,3 +311,4 @@
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: ehci_pci");
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index a4c6410..f351ff5 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -139,14 +139,21 @@
 
 static int ohci_platform_suspend(struct device *dev)
 {
-	struct usb_ohci_pdata *pdata = dev_get_platdata(dev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev->platform_data;
 	struct platform_device *pdev =
 		container_of(dev, struct platform_device, dev);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
 
 	if (pdata->power_suspend)
 		pdata->power_suspend(pdev);
 
-	return 0;
+	return ret;
 }
 
 static int ohci_platform_resume(struct device *dev)
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 93371a2..deea5d1 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -19,15 +19,26 @@
  * This file is licenced under the GPL.
  */
 
-#include <linux/device.h>
-#include <linux/signal.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
-#include <mach/hardware.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include <mach/hardware.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI PXA27x/PXA3x driver"
 
 /*
  * UHC: USB Host Controller (OHCI-like) register definitions
@@ -101,16 +112,16 @@
 
 #define PXA_UHC_MAX_PORTNUM    3
 
-struct pxa27x_ohci {
-	/* must be 1st member here for hcd_to_ohci() to work */
-	struct ohci_hcd ohci;
+static const char hcd_name[] = "ohci-pxa27x";
 
-	struct device	*dev;
+static struct hc_driver __read_mostly ohci_pxa27x_hc_driver;
+
+struct pxa27x_ohci {
 	struct clk	*clk;
 	void __iomem	*mmio_base;
 };
 
-#define to_pxa27x_ohci(hcd)	(struct pxa27x_ohci *)hcd_to_ohci(hcd)
+#define to_pxa27x_ohci(hcd)	(struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv)
 
 /*
   PMM_NPS_MODE -- PMM Non-power switching mode
@@ -122,10 +133,10 @@
   PMM_PERPORT_MODE -- PMM per port switching mode
       Ports are powered individually.
  */
-static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode)
+static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode)
 {
-	uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
-	uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB);
+	uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA);
+	uint32_t uhcrhdb = __raw_readl(pxa_ohci->mmio_base + UHCRHDB);
 
 	switch (mode) {
 	case PMM_NPS_MODE:
@@ -149,20 +160,18 @@
 		uhcrhda |= RH_A_NPS;
 	}
 
-	__raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
-	__raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB);
+	__raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA);
+	__raw_writel(uhcrhdb, pxa_ohci->mmio_base + UHCRHDB);
 	return 0;
 }
 
-extern int usb_disabled(void);
-
 /*-------------------------------------------------------------------------*/
 
-static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci,
+static inline void pxa27x_setup_hc(struct pxa27x_ohci *pxa_ohci,
 				   struct pxaohci_platform_data *inf)
 {
-	uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
-	uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
+	uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR);
+	uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA);
 
 	if (inf->flags & ENABLE_PORT1)
 		uhchr &= ~UHCHR_SSEP1;
@@ -194,17 +203,17 @@
 		uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2);
 	}
 
-	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
-	__raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
+	__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
+	__raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA);
 }
 
-static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
+static inline void pxa27x_reset_hc(struct pxa27x_ohci *pxa_ohci)
 {
-	uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
+	uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR);
 
-	__raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR);
+	__raw_writel(uhchr | UHCHR_FHR, pxa_ohci->mmio_base + UHCHR);
 	udelay(11);
-	__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
+	__raw_writel(uhchr & ~UHCHR_FHR, pxa_ohci->mmio_base + UHCHR);
 }
 
 #ifdef CONFIG_PXA27x
@@ -213,25 +222,26 @@
 #define pxa27x_clear_otgph()	do {} while (0)
 #endif
 
-static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev)
+static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
 {
 	int retval = 0;
 	struct pxaohci_platform_data *inf;
 	uint32_t uhchr;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 
 	inf = dev_get_platdata(dev);
 
-	clk_prepare_enable(ohci->clk);
+	clk_prepare_enable(pxa_ohci->clk);
 
-	pxa27x_reset_hc(ohci);
+	pxa27x_reset_hc(pxa_ohci);
 
-	uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR;
-	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
+	uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) | UHCHR_FSBIR;
+	__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
 
-	while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR)
+	while (__raw_readl(pxa_ohci->mmio_base + UHCHR) & UHCHR_FSBIR)
 		cpu_relax();
 
-	pxa27x_setup_hc(ohci, inf);
+	pxa27x_setup_hc(pxa_ohci, inf);
 
 	if (inf->init)
 		retval = inf->init(dev);
@@ -240,38 +250,39 @@
 		return retval;
 
 	if (cpu_is_pxa3xx())
-		pxa3xx_u2d_start_hc(&ohci_to_hcd(&ohci->ohci)->self);
+		pxa3xx_u2d_start_hc(&hcd->self);
 
-	uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
-	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
-	__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
+	uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
+	__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
+	__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, pxa_ohci->mmio_base + UHCHIE);
 
 	/* Clear any OTG Pin Hold */
 	pxa27x_clear_otgph();
 	return 0;
 }
 
-static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev)
+static void pxa27x_stop_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
 {
 	struct pxaohci_platform_data *inf;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	uint32_t uhccoms;
 
 	inf = dev_get_platdata(dev);
 
 	if (cpu_is_pxa3xx())
-		pxa3xx_u2d_stop_hc(&ohci_to_hcd(&ohci->ohci)->self);
+		pxa3xx_u2d_stop_hc(&hcd->self);
 
 	if (inf->exit)
 		inf->exit(dev);
 
-	pxa27x_reset_hc(ohci);
+	pxa27x_reset_hc(pxa_ohci);
 
 	/* Host Controller Reset */
-	uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01;
-	__raw_writel(uhccoms, ohci->mmio_base + UHCCOMS);
+	uhccoms = __raw_readl(pxa_ohci->mmio_base + UHCCOMS) | 0x01;
+	__raw_writel(uhccoms, pxa_ohci->mmio_base + UHCCOMS);
 	udelay(10);
 
-	clk_disable_unprepare(ohci->clk);
+	clk_disable_unprepare(pxa_ohci->clk);
 }
 
 #ifdef CONFIG_OF
@@ -356,7 +367,8 @@
 	int retval, irq;
 	struct usb_hcd *hcd;
 	struct pxaohci_platform_data *inf;
-	struct pxa27x_ohci *ohci;
+	struct pxa27x_ohci *pxa_ohci;
+	struct ohci_hcd *ohci;
 	struct resource *r;
 	struct clk *usb_clk;
 
@@ -409,29 +421,31 @@
 	}
 
 	/* initialize "struct pxa27x_ohci" */
-	ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd);
-	ohci->dev = &pdev->dev;
-	ohci->clk = usb_clk;
-	ohci->mmio_base = (void __iomem *)hcd->regs;
+	pxa_ohci = to_pxa27x_ohci(hcd);
+	pxa_ohci->clk = usb_clk;
+	pxa_ohci->mmio_base = (void __iomem *)hcd->regs;
 
-	if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) {
+	retval = pxa27x_start_hc(pxa_ohci, &pdev->dev);
+	if (retval < 0) {
 		pr_debug("pxa27x_start_hc failed");
 		goto err3;
 	}
 
 	/* Select Power Management Mode */
-	pxa27x_ohci_select_pmm(ohci, inf->port_mode);
+	pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode);
 
 	if (inf->power_budget)
 		hcd->power_budget = inf->power_budget;
 
-	ohci_hcd_init(hcd_to_ohci(hcd));
+	/* The value of NDP in roothub_a is incorrect on this hardware */
+	ohci = hcd_to_ohci(hcd);
+	ohci->num_ports = 3;
 
 	retval = usb_add_hcd(hcd, irq, 0);
 	if (retval == 0)
 		return retval;
 
-	pxa27x_stop_hc(ohci, &pdev->dev);
+	pxa27x_stop_hc(pxa_ohci, &pdev->dev);
  err3:
 	iounmap(hcd->regs);
  err2:
@@ -459,88 +473,18 @@
  */
 void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 {
-	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+	struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
 
 	usb_remove_hcd(hcd);
-	pxa27x_stop_hc(ohci, &pdev->dev);
+	pxa27x_stop_hc(pxa_ohci, &pdev->dev);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	clk_put(pxa_ohci->clk);
 	usb_put_hcd(hcd);
-	clk_put(ohci->clk);
 }
 
 /*-------------------------------------------------------------------------*/
 
-static int
-ohci_pxa27x_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci);
-
-	/* The value of NDP in roothub_a is incorrect on this hardware */
-	ohci->num_ports = 3;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		dev_err(hcd->self.controller, "can't start %s",
-			hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pxa27x_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"PXA27x OHCI",
-	.hcd_priv_size =	sizeof(struct pxa27x_ohci),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_pxa27x_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef  CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
 static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev)
 {
 	pr_debug ("In ohci_hcd_pxa27x_drv_probe");
@@ -563,32 +507,42 @@
 static int ohci_hcd_pxa27x_drv_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+	struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
 
-	if (time_before(jiffies, ohci->ohci.next_statechange))
+
+	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
-	ohci->ohci.next_statechange = jiffies;
+	ohci->next_statechange = jiffies;
 
-	pxa27x_stop_hc(ohci, dev);
-	return 0;
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	pxa27x_stop_hc(pxa_ohci, dev);
+	return ret;
 }
 
 static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+	struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
 	struct pxaohci_platform_data *inf = dev_get_platdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 	int status;
 
-	if (time_before(jiffies, ohci->ohci.next_statechange))
+	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
-	ohci->ohci.next_statechange = jiffies;
+	ohci->next_statechange = jiffies;
 
-	if ((status = pxa27x_start_hc(ohci, dev)) < 0)
+	status = pxa27x_start_hc(pxa_ohci, dev);
+	if (status < 0)
 		return status;
 
 	/* Select Power Management Mode */
-	pxa27x_ohci_select_pmm(ohci, inf->port_mode);
+	pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode);
 
 	ohci_resume(hcd, false);
 	return 0;
@@ -600,9 +554,6 @@
 };
 #endif
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:pxa27x-ohci");
-
 static struct platform_driver ohci_hcd_pxa27x_driver = {
 	.probe		= ohci_hcd_pxa27x_drv_probe,
 	.remove		= ohci_hcd_pxa27x_drv_remove,
@@ -617,3 +568,27 @@
 	},
 };
 
+static const struct ohci_driver_overrides pxa27x_overrides __initconst = {
+	.extra_priv_size =      sizeof(struct pxa27x_ohci),
+};
+
+static int __init ohci_pxa27x_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides);
+	return platform_driver_register(&ohci_hcd_pxa27x_driver);
+}
+module_init(ohci_pxa27x_init);
+
+static void __exit ohci_pxa27x_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_pxa27x_driver);
+}
+module_exit(ohci_pxa27x_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa27x-ohci");
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 4919afa..f90101b 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -19,19 +19,36 @@
  * This file is licenced under the GPL.
 */
 
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
 /* clock device associated with the hcd */
 
+
+#define DRIVER_DESC "OHCI S3C2410 driver"
+
+static const char hcd_name[] = "ohci-s3c2410";
+
 static struct clk *clk;
 static struct clk *usb_clk;
 
 /* forward definitions */
 
+static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
+			u16 wValue, u16 wIndex, char *buf, u16 wLength);
+static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
+
 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
 
 /* conversion functions */
@@ -47,10 +64,10 @@
 
 	dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
 
-	clk_enable(usb_clk);
+	clk_prepare_enable(usb_clk);
 	mdelay(2);			/* let the bus clock stabilise */
 
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 
 	if (info != NULL) {
 		info->hcd	= hcd;
@@ -75,8 +92,8 @@
 			(info->enable_oc)(info, 0);
 	}
 
-	clk_disable(clk);
-	clk_disable(usb_clk);
+	clk_disable_unprepare(clk);
+	clk_disable_unprepare(usb_clk);
 }
 
 /* ohci_s3c2410_hub_status_data
@@ -93,7 +110,7 @@
 	int orig;
 	int portno;
 
-	orig  = ohci_hub_status_data(hcd, buf);
+	orig = orig_ohci_hub_status_data(hcd, buf);
 
 	if (info == NULL)
 		return orig;
@@ -164,7 +181,7 @@
 	 * process the request straight away and exit */
 
 	if (info == NULL) {
-		ret = ohci_hub_control(hcd, typeReq, wValue,
+		ret = orig_ohci_hub_control(hcd, typeReq, wValue,
 				       wIndex, buf, wLength);
 		goto out;
 	}
@@ -214,7 +231,7 @@
 		break;
 	}
 
-	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 	if (ret)
 		goto out;
 
@@ -374,8 +391,6 @@
 
 	s3c2410_start_hc(dev, hcd);
 
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
 	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
 	if (retval != 0)
 		goto err_ioremap;
@@ -392,71 +407,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int
-ohci_s3c2410_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	ret = ohci_init(ohci);
-	if (ret < 0)
-		return ret;
-
-	ret = ohci_run(ohci);
-	if (ret < 0) {
-		dev_err(hcd->self.controller, "can't start %s\n",
-			hcd->self.bus_name);
-		ohci_stop(hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-
-static const struct hc_driver ohci_s3c2410_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"S3C24XX OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_s3c2410_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_s3c2410_hub_status_data,
-	.hub_control =		ohci_s3c2410_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/* device driver */
+static struct hc_driver __read_mostly ohci_s3c2410_hc_driver;
 
 static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
 {
@@ -533,4 +484,39 @@
 	},
 };
 
+static int __init ohci_s3c2410_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ohci_init_driver(&ohci_s3c2410_hc_driver, NULL);
+
+	/*
+	 * The Samsung HW has some unusual quirks, which require
+	 * Sumsung-specific workarounds. We override certain hc_driver
+	 * functions here to achieve that. We explicitly do not enhance
+	 * ohci_driver_overrides to allow this more easily, since this
+	 * is an unusual case, and we don't want to encourage others to
+	 * override these functions by making it too easy.
+	 */
+
+	orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control;
+	orig_ohci_hub_status_data = ohci_s3c2410_hc_driver.hub_status_data;
+
+	ohci_s3c2410_hc_driver.hub_status_data	= ohci_s3c2410_hub_status_data;
+	ohci_s3c2410_hc_driver.hub_control	= ohci_s3c2410_hub_control;
+
+	return platform_driver_register(&ohci_hcd_s3c2410_driver);
+}
+module_init(ohci_s3c2410_init);
+
+static void __exit ohci_s3c2410_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_s3c2410_driver);
+}
+module_exit(ohci_s3c2410_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:s3c2410-ohci");
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index d479d5d..2a5de5f 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -216,14 +216,21 @@
 static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
 {
 	struct device *dev = &pdev->dev;
-	struct ohci_hcd	*ohci = hcd_to_ohci(platform_get_drvdata(pdev));
+	struct usb_hcd  *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;
 
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
-	return 0;
+	return ret;
 }
 
 static int ohci_sm501_resume(struct platform_device *pdev)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index cc9dd9e..31ff3fc 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -11,92 +11,37 @@
 * warranty of any kind, whether express or implied.
 */
 
-#include <linux/signal.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI SPEAr driver"
+
+static const char hcd_name[] = "SPEAr-ohci";
 struct spear_ohci {
-	struct ohci_hcd ohci;
 	struct clk *clk;
 };
 
-#define to_spear_ohci(hcd)	(struct spear_ohci *)hcd_to_ohci(hcd)
+#define to_spear_ohci(hcd)     (struct spear_ohci *)(hcd_to_ohci(hcd)->priv)
 
-static void spear_start_ohci(struct spear_ohci *ohci)
-{
-	clk_prepare_enable(ohci->clk);
-}
-
-static void spear_stop_ohci(struct spear_ohci *ohci)
-{
-	clk_disable_unprepare(ohci->clk);
-}
-
-static int ohci_spear_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	ret = ohci_init(ohci);
-	if (ret < 0)
-		return ret;
-	ohci->regs = hcd->regs;
-
-	ret = ohci_run(ohci);
-	if (ret < 0) {
-		dev_err(hcd->self.controller, "can't start\n");
-		ohci_stop(hcd);
-		return ret;
-	}
-
-	create_debug_files(ohci);
-
-#ifdef DEBUG
-	ohci_dump(ohci, 1);
-#endif
-	return 0;
-}
-
-static const struct hc_driver ohci_spear_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "SPEAr OHCI",
-	.hcd_priv_size		= sizeof(struct spear_ohci),
-
-	/* generic hardware linkage */
-	.irq			= ohci_irq,
-	.flags			= HCD_USB11 | HCD_MEMORY,
-
-	/* basic lifecycle operations */
-	.start			= ohci_spear_start,
-	.stop			= ohci_stop,
-	.shutdown		= ohci_shutdown,
-#ifdef	CONFIG_PM
-	.bus_suspend		= ohci_bus_suspend,
-	.bus_resume		= ohci_bus_resume,
-#endif
-
-	/* managing i/o requests and associated device resources */
-	.urb_enqueue		= ohci_urb_enqueue,
-	.urb_dequeue		= ohci_urb_dequeue,
-	.endpoint_disable	= ohci_endpoint_disable,
-
-	/* scheduling support */
-	.get_frame_number	= ohci_get_frame,
-
-	/* root hub support */
-	.hub_status_data	= ohci_hub_status_data,
-	.hub_control		= ohci_hub_control,
-
-	.start_port_reset	= ohci_start_port_reset,
-};
+static struct hc_driver __read_mostly ohci_spear_hc_driver;
 
 static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 {
 	const struct hc_driver *driver = &ohci_spear_hc_driver;
+	struct ohci_hcd *ohci;
 	struct usb_hcd *hcd = NULL;
 	struct clk *usbh_clk;
-	struct spear_ohci *ohci_p;
+	struct spear_ohci *sohci_p;
 	struct resource *res;
 	int retval, irq;
 
@@ -151,16 +96,18 @@
 		goto err_put_hcd;
 	}
 
-	ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
-	ohci_p->clk = usbh_clk;
-	spear_start_ohci(ohci_p);
-	ohci_hcd_init(hcd_to_ohci(hcd));
+	sohci_p = to_spear_ohci(hcd);
+	sohci_p->clk = usbh_clk;
+
+	clk_prepare_enable(sohci_p->clk);
+
+	ohci = hcd_to_ohci(hcd);
 
 	retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0);
 	if (retval == 0)
 		return retval;
 
-	spear_stop_ohci(ohci_p);
+	clk_disable_unprepare(sohci_p->clk);
 err_put_hcd:
 	usb_put_hcd(hcd);
 fail:
@@ -172,11 +119,11 @@
 static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+	struct spear_ohci *sohci_p = to_spear_ohci(hcd);
 
 	usb_remove_hcd(hcd);
-	if (ohci_p->clk)
-		spear_stop_ohci(ohci_p);
+	if (sohci_p->clk)
+		clk_disable_unprepare(sohci_p->clk);
 
 	usb_put_hcd(hcd);
 	return 0;
@@ -188,13 +135,14 @@
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+	struct spear_ohci *sohci_p = to_spear_ohci(hcd);
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;
 
-	spear_stop_ohci(ohci_p);
+	clk_disable_unprepare(sohci_p->clk);
+
 	return 0;
 }
 
@@ -202,13 +150,13 @@
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+	struct spear_ohci *sohci_p = to_spear_ohci(hcd);
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;
 
-	spear_start_ohci(ohci_p);
+	clk_prepare_enable(sohci_p->clk);
 	ohci_resume(hcd, false);
 	return 0;
 }
@@ -234,4 +182,28 @@
 	},
 };
 
+static const struct ohci_driver_overrides spear_overrides __initconst = {
+	.extra_priv_size = sizeof(struct spear_ohci),
+};
+static int __init ohci_spear_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides);
+	return platform_driver_register(&spear_ohci_hcd_driver);
+}
+module_init(ohci_spear_init);
+
+static void __exit ohci_spear_cleanup(void)
+{
+	platform_driver_unregister(&spear_ohci_hcd_driver);
+}
+module_exit(ohci_spear_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Deepak Sikri");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:spear-ohci");
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 08ef282..dfbdd3a 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -79,11 +79,30 @@
 #define USB_INTEL_USB3_PSSEN   0xD8
 #define USB_INTEL_USB3PRM      0xDC
 
+/*
+ * amd_chipset_gen values represent AMD different chipset generations
+ */
+enum amd_chipset_gen {
+	NOT_AMD_CHIPSET = 0,
+	AMD_CHIPSET_SB600,
+	AMD_CHIPSET_SB700,
+	AMD_CHIPSET_SB800,
+	AMD_CHIPSET_HUDSON2,
+	AMD_CHIPSET_BOLTON,
+	AMD_CHIPSET_YANGTZE,
+	AMD_CHIPSET_UNKNOWN,
+};
+
+struct amd_chipset_type {
+	enum amd_chipset_gen gen;
+	u8 rev;
+};
+
 static struct amd_chipset_info {
 	struct pci_dev	*nb_dev;
 	struct pci_dev	*smbus_dev;
 	int nb_type;
-	int sb_type;
+	struct amd_chipset_type sb_type;
 	int isoc_reqs;
 	int probe_count;
 	int probe_result;
@@ -91,6 +110,51 @@
 
 static DEFINE_SPINLOCK(amd_lock);
 
+/*
+ * amd_chipset_sb_type_init - initialize amd chipset southbridge type
+ *
+ * AMD FCH/SB generation and revision is identified by SMBus controller
+ * vendor, device and revision IDs.
+ *
+ * Returns: 1 if it is an AMD chipset, 0 otherwise.
+ */
+static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
+{
+	u8 rev = 0;
+	pinfo->sb_type.gen = AMD_CHIPSET_UNKNOWN;
+
+	pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+			PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (pinfo->smbus_dev) {
+		rev = pinfo->smbus_dev->revision;
+		if (rev >= 0x10 && rev <= 0x1f)
+			pinfo->sb_type.gen = AMD_CHIPSET_SB600;
+		else if (rev >= 0x30 && rev <= 0x3f)
+			pinfo->sb_type.gen = AMD_CHIPSET_SB700;
+		else if (rev >= 0x40 && rev <= 0x4f)
+			pinfo->sb_type.gen = AMD_CHIPSET_SB800;
+	} else {
+		pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+				PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
+
+		if (!pinfo->smbus_dev) {
+			pinfo->sb_type.gen = NOT_AMD_CHIPSET;
+			return 0;
+		}
+
+		rev = pinfo->smbus_dev->revision;
+		if (rev >= 0x11 && rev <= 0x14)
+			pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2;
+		else if (rev >= 0x15 && rev <= 0x18)
+			pinfo->sb_type.gen = AMD_CHIPSET_BOLTON;
+		else if (rev >= 0x39 && rev <= 0x3a)
+			pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE;
+	}
+
+	pinfo->sb_type.rev = rev;
+	return 1;
+}
+
 void sb800_prefetch(struct device *dev, int on)
 {
 	u16 misc;
@@ -106,7 +170,6 @@
 
 int usb_amd_find_chipset_info(void)
 {
-	u8 rev = 0;
 	unsigned long flags;
 	struct amd_chipset_info info;
 	int ret;
@@ -122,27 +185,17 @@
 	memset(&info, 0, sizeof(info));
 	spin_unlock_irqrestore(&amd_lock, flags);
 
-	info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
-	if (info.smbus_dev) {
-		rev = info.smbus_dev->revision;
-		if (rev >= 0x40)
-			info.sb_type = 1;
-		else if (rev >= 0x30 && rev <= 0x3b)
-			info.sb_type = 3;
-	} else {
-		info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-						0x780b, NULL);
-		if (!info.smbus_dev) {
-			ret = 0;
-			goto commit;
-		}
-
-		rev = info.smbus_dev->revision;
-		if (rev >= 0x11 && rev <= 0x18)
-			info.sb_type = 2;
+	if (!amd_chipset_sb_type_init(&info)) {
+		ret = 0;
+		goto commit;
 	}
 
-	if (info.sb_type == 0) {
+	/* Below chipset generations needn't enable AMD PLL quirk */
+	if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN ||
+			info.sb_type.gen == AMD_CHIPSET_SB600 ||
+			info.sb_type.gen == AMD_CHIPSET_YANGTZE ||
+			(info.sb_type.gen == AMD_CHIPSET_SB700 &&
+			info.sb_type.rev > 0x3b)) {
 		if (info.smbus_dev) {
 			pci_dev_put(info.smbus_dev);
 			info.smbus_dev = NULL;
@@ -197,6 +250,39 @@
 }
 EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
 
+int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
+{
+	/* Make sure amd chipset type has already been initialized */
+	usb_amd_find_chipset_info();
+	if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE)
+		return 0;
+
+	dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
+	return 1;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
+
+bool usb_amd_hang_symptom_quirk(void)
+{
+	u8 rev;
+
+	usb_amd_find_chipset_info();
+	rev = amd_chipset.sb_type.rev;
+	/* SB600 and old version of SB700 have hang symptom bug */
+	return amd_chipset.sb_type.gen == AMD_CHIPSET_SB600 ||
+			(amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
+			 rev >= 0x3a && rev <= 0x3b);
+}
+EXPORT_SYMBOL_GPL(usb_amd_hang_symptom_quirk);
+
+bool usb_amd_prefetch_quirk(void)
+{
+	usb_amd_find_chipset_info();
+	/* SB800 needs pre-fetch fix */
+	return amd_chipset.sb_type.gen == AMD_CHIPSET_SB800;
+}
+EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
+
 /*
  * The hardware normally enables the A-link power management feature, which
  * lets the system lower the power consumption in idle states.
@@ -229,7 +315,9 @@
 		}
 	}
 
-	if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) {
+	if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 ||
+			amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 ||
+			amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) {
 		outb_p(AB_REG_BAR_LOW, 0xcd6);
 		addr_low = inb_p(0xcd7);
 		outb_p(AB_REG_BAR_HIGH, 0xcd6);
@@ -240,7 +328,8 @@
 		outl_p(0x40, AB_DATA(addr));
 		outl_p(0x34, AB_INDX(addr));
 		val = inl_p(AB_DATA(addr));
-	} else if (amd_chipset.sb_type == 3) {
+	} else if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
+			amd_chipset.sb_type.rev <= 0x3b) {
 		pci_read_config_dword(amd_chipset.smbus_dev,
 					AB_REG_BAR_SB700, &addr);
 		outl(AX_INDXC, AB_INDX(addr));
@@ -353,7 +442,7 @@
 	amd_chipset.nb_dev = NULL;
 	amd_chipset.smbus_dev = NULL;
 	amd_chipset.nb_type = 0;
-	amd_chipset.sb_type = 0;
+	memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
 	amd_chipset.isoc_reqs = 0;
 	amd_chipset.probe_result = 0;
 
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index ed6700d..638e88f 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -5,6 +5,8 @@
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 int usb_amd_find_chipset_info(void);
+bool usb_amd_hang_symptom_quirk(void);
+bool usb_amd_prefetch_quirk(void);
 void usb_amd_dev_put(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 5477bf5..79620c3 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1413,7 +1413,7 @@
 			case SL11H_CTL1MASK_SE0: s = " se0/reset"; break;
 			case SL11H_CTL1MASK_K: s = " k/resume"; break;
 			default: s = "j"; break;
-			}; s; }),
+			} s; }),
 			(t & SL11H_CTL1MASK_LSPD) ? " lowspeed" : "",
 			(t & SL11H_CTL1MASK_SUSPEND) ? " suspend" : "");
 
@@ -1446,7 +1446,7 @@
 			case USB_PID_SETUP: s = "setup"; break;
 			case USB_PID_ACK: s = "status"; break;
 			default: s = "?"; break;
-			}; s;}),
+			} s;}),
 			ep->maxpacket,
 			ep->nak_count, ep->error_count);
 		list_for_each_entry (urb, &ep->hep->urb_list, urb_list) {
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 4557375..8e239cd 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -310,14 +310,14 @@
 	unsigned short portsc1, portsc2;
 
 
-	usbcmd    = uhci_readw(uhci, 0);
-	usbstat   = uhci_readw(uhci, 2);
-	usbint    = uhci_readw(uhci, 4);
-	usbfrnum  = uhci_readw(uhci, 6);
-	flbaseadd = uhci_readl(uhci, 8);
-	sof       = uhci_readb(uhci, 12);
-	portsc1   = uhci_readw(uhci, 16);
-	portsc2   = uhci_readw(uhci, 18);
+	usbcmd    = uhci_readw(uhci, USBCMD);
+	usbstat   = uhci_readw(uhci, USBSTS);
+	usbint    = uhci_readw(uhci, USBINTR);
+	usbfrnum  = uhci_readw(uhci, USBFRNUM);
+	flbaseadd = uhci_readl(uhci, USBFLBASEADD);
+	sof       = uhci_readb(uhci, USBSOF);
+	portsc1   = uhci_readw(uhci, USBPORTSC1);
+	portsc2   = uhci_readw(uhci, USBPORTSC2);
 
 	out += sprintf(out, "  usbcmd    =     %04x   %s%s%s%s%s%s%s%s\n",
 		usbcmd,
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 9189bc9..93e17b1 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -75,8 +75,6 @@
 	return !!*buf;
 }
 
-#define OK(x)			len = (x); break
-
 #define CLR_RH_PORTSTAT(x) \
 	status = uhci_readw(uhci, port_addr);	\
 	status &= ~(RWC_BITS|WZ_BITS); \
@@ -244,7 +242,7 @@
 			u16 wIndex, char *buf, u16 wLength)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
-	int status, lstatus, retval = 0, len = 0;
+	int status, lstatus, retval = 0;
 	unsigned int port = wIndex - 1;
 	unsigned long port_addr = USBPORTSC1 + 2 * port;
 	u16 wPortChange, wPortStatus;
@@ -258,7 +256,8 @@
 
 	case GetHubStatus:
 		*(__le32 *)buf = cpu_to_le32(0);
-		OK(4);		/* hub power */
+		retval = 4; /* hub power */
+		break;
 	case GetPortStatus:
 		if (port >= uhci->rh_numports)
 			goto err;
@@ -311,13 +310,14 @@
 
 		*(__le16 *)buf = cpu_to_le16(wPortStatus);
 		*(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
-		OK(4);
+		retval = 4;
+		break;
 	case SetHubFeature:		/* We don't implement these */
 	case ClearHubFeature:
 		switch (wValue) {
 		case C_HUB_OVER_CURRENT:
 		case C_HUB_LOCAL_POWER:
-			OK(0);
+			break;
 		default:
 			goto err;
 		}
@@ -329,7 +329,7 @@
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
 			SET_RH_PORTSTAT(USBPORTSC_SUSP);
-			OK(0);
+			break;
 		case USB_PORT_FEAT_RESET:
 			SET_RH_PORTSTAT(USBPORTSC_PR);
 
@@ -338,10 +338,10 @@
 
 			/* USB v2.0 7.1.7.5 */
 			uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
-			OK(0);
+			break;
 		case USB_PORT_FEAT_POWER:
 			/* UHCI has no power switching */
-			OK(0);
+			break;
 		default:
 			goto err;
 		}
@@ -356,10 +356,10 @@
 
 			/* Disable terminates Resume signalling */
 			uhci_finish_suspend(uhci, port, port_addr);
-			OK(0);
+			break;
 		case USB_PORT_FEAT_C_ENABLE:
 			CLR_RH_PORTSTAT(USBPORTSC_PEC);
-			OK(0);
+			break;
 		case USB_PORT_FEAT_SUSPEND:
 			if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) {
 
@@ -382,32 +382,32 @@
 					uhci->ports_timeout = jiffies +
 						msecs_to_jiffies(20);
 			}
-			OK(0);
+			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(port, &uhci->port_c_suspend);
-			OK(0);
+			break;
 		case USB_PORT_FEAT_POWER:
 			/* UHCI has no power switching */
 			goto err;
 		case USB_PORT_FEAT_C_CONNECTION:
 			CLR_RH_PORTSTAT(USBPORTSC_CSC);
-			OK(0);
+			break;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 			CLR_RH_PORTSTAT(USBPORTSC_OCC);
-			OK(0);
+			break;
 		case USB_PORT_FEAT_C_RESET:
 			/* this driver won't report these */
-			OK(0);
+			break;
 		default:
 			goto err;
 		}
 		break;
 	case GetHubDescriptor:
-		len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
-		memcpy(buf, root_hub_hub_des, len);
-		if (len > 2)
+		retval = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+		memcpy(buf, root_hub_hub_des, retval);
+		if (retval > 2)
 			buf[2] = uhci->rh_numports;
-		OK(len);
+		break;
 	default:
 err:
 		retval = -EPIPE;
diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
index 0f228c4..4cd7988 100644
--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -162,6 +162,8 @@
 
 #ifdef CONFIG_PM
 
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated);
+
 static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
@@ -174,12 +176,6 @@
 	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
 		goto done_okay;		/* Already suspended or dead */
 
-	if (uhci->rh_state > UHCI_RH_SUSPENDED) {
-		dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
-		rc = -EBUSY;
-		goto done;
-	};
-
 	/* All PCI host controllers are required to disable IRQ generation
 	 * at the source, so we must turn off PIRQ.
 	 */
@@ -195,8 +191,15 @@
 
 done_okay:
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-done:
 	spin_unlock_irq(&uhci->lock);
+
+	synchronize_irq(hcd->irq);
+
+	/* Check for race with a wakeup request */
+	if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+		uhci_pci_resume(hcd, false);
+		rc = -EBUSY;
+	}
 	return rc;
 }
 
@@ -299,3 +302,5 @@
 	},
 #endif
 };
+
+MODULE_SOFTDEP("pre: ehci_pci");
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index d033a0ec..ded842b 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -105,8 +105,7 @@
 
 	uhci->regs = hcd->regs;
 
-	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED |
-								IRQF_SHARED);
+	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
 	if (ret)
 		goto err_uhci;
 
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index ecc88db..1b0888f 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -134,7 +134,7 @@
 	default:
 		ret = asl_urb_enqueue(whc, urb, mem_flags);
 		break;
-	};
+	}
 
 	return ret;
 }
@@ -160,7 +160,7 @@
 	default:
 		ret = asl_urb_dequeue(whc, urb, status);
 		break;
-	};
+	}
 
 	return ret;
 }
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index e8b4c56..805f234 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -296,7 +296,7 @@
 	/* Wait for last stop endpoint command to finish */
 	timeleft = wait_for_completion_interruptible_timeout(
 			cmd->completion,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for stop endpoint command\n",
 				timeleft == 0 ? "Timeout" : "Signal");
@@ -524,7 +524,8 @@
  * the compliance mode timer is deleted. A port won't enter
  * compliance mode if it has previously entered U0.
  */
-void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
+				    u16 wIndex)
 {
 	u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
 	bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 83bcd13..49b8bd0 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1693,9 +1693,7 @@
 void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
-	struct dev_info	*dev_info, *next;
 	struct xhci_cd  *cur_cd, *next_cd;
-	unsigned long	flags;
 	int size;
 	int i, j, num_ports;
 
@@ -1756,13 +1754,6 @@
 
 	scratchpad_free(xhci);
 
-	spin_lock_irqsave(&xhci->lock, flags);
-	list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) {
-		list_del(&dev_info->list);
-		kfree(dev_info);
-	}
-	spin_unlock_irqrestore(&xhci->lock, flags);
-
 	if (!xhci->rh_bw)
 		goto no_bw;
 
@@ -2231,7 +2222,6 @@
 	u32 page_size, temp;
 	int i;
 
-	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
 	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
 
 	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bfbd80..1e2f3f4 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -178,7 +178,7 @@
 			if (ring->type == TYPE_EVENT &&
 					last_trb_on_last_seg(xhci, ring,
 						ring->deq_seg, ring->dequeue)) {
-				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+				ring->cycle_state ^= 1;
 			}
 			ring->deq_seg = ring->deq_seg->next;
 			ring->dequeue = ring->deq_seg->trbs;
@@ -726,7 +726,7 @@
 
 /* Must be called with xhci->lock held in interrupt context */
 static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
-		struct xhci_td *cur_td, int status, char *adjective)
+		struct xhci_td *cur_td, int status)
 {
 	struct usb_hcd *hcd;
 	struct urb	*urb;
@@ -765,10 +765,9 @@
  *  2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
  *     bit cleared) so that the HW will skip over them.
  */
-static void handle_stopped_endpoint(struct xhci_hcd *xhci,
+static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 		union xhci_trb *trb, struct xhci_event_cmd *event)
 {
-	unsigned int slot_id;
 	unsigned int ep_index;
 	struct xhci_virt_device *virt_dev;
 	struct xhci_ring *ep_ring;
@@ -779,10 +778,7 @@
 
 	struct xhci_dequeue_state deq_state;
 
-	if (unlikely(TRB_TO_SUSPEND_PORT(
-			     le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])))) {
-		slot_id = TRB_TO_SLOT_ID(
-			le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]));
+	if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
 		virt_dev = xhci->devs[slot_id];
 		if (virt_dev)
 			handle_cmd_in_cmd_wait_list(xhci, virt_dev,
@@ -795,7 +791,6 @@
 	}
 
 	memset(&deq_state, 0, sizeof(deq_state));
-	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 	ep = &xhci->devs[slot_id]->eps[ep_index];
 
@@ -891,7 +886,7 @@
 		/* Doesn't matter what we pass for status, since the core will
 		 * just overwrite it (because the URB has been unlinked).
 		 */
-		xhci_giveback_urb_in_irq(xhci, cur_td, 0, "cancelled");
+		xhci_giveback_urb_in_irq(xhci, cur_td, 0);
 
 		/* Stop processing the cancelled list if the watchdog timer is
 		 * running.
@@ -1001,7 +996,7 @@
 				if (!list_empty(&cur_td->cancelled_td_list))
 					list_del_init(&cur_td->cancelled_td_list);
 				xhci_giveback_urb_in_irq(xhci, cur_td,
-						-ESHUTDOWN, "killed");
+						-ESHUTDOWN);
 			}
 			while (!list_empty(&temp_ep->cancelled_td_list)) {
 				cur_td = list_first_entry(
@@ -1010,7 +1005,7 @@
 						cancelled_td_list);
 				list_del_init(&cur_td->cancelled_td_list);
 				xhci_giveback_urb_in_irq(xhci, cur_td,
-						-ESHUTDOWN, "killed");
+						-ESHUTDOWN);
 			}
 		}
 	}
@@ -1077,11 +1072,9 @@
  * endpoint doorbell to restart the ring, but only if there aren't more
  * cancellations pending.
  */
-static void handle_set_deq_completion(struct xhci_hcd *xhci,
-		struct xhci_event_cmd *event,
-		union xhci_trb *trb)
+static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
+		union xhci_trb *trb, u32 cmd_comp_code)
 {
-	unsigned int slot_id;
 	unsigned int ep_index;
 	unsigned int stream_id;
 	struct xhci_ring *ep_ring;
@@ -1089,7 +1082,6 @@
 	struct xhci_ep_ctx *ep_ctx;
 	struct xhci_slot_ctx *slot_ctx;
 
-	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 	stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
 	dev = xhci->devs[slot_id];
@@ -1107,11 +1099,11 @@
 	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
 
-	if (GET_COMP_CODE(le32_to_cpu(event->status)) != COMP_SUCCESS) {
+	if (cmd_comp_code != COMP_SUCCESS) {
 		unsigned int ep_state;
 		unsigned int slot_state;
 
-		switch (GET_COMP_CODE(le32_to_cpu(event->status))) {
+		switch (cmd_comp_code) {
 		case COMP_TRB_ERR:
 			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
 					"of stream ID configuration\n");
@@ -1134,7 +1126,7 @@
 		default:
 			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
 					"completion code of %u.\n",
-				  GET_COMP_CODE(le32_to_cpu(event->status)));
+				  cmd_comp_code);
 			break;
 		}
 		/* OK what do we do now?  The endpoint state is hosed, and we
@@ -1171,21 +1163,17 @@
 	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 }
 
-static void handle_reset_ep_completion(struct xhci_hcd *xhci,
-		struct xhci_event_cmd *event,
-		union xhci_trb *trb)
+static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
+		union xhci_trb *trb, u32 cmd_comp_code)
 {
-	int slot_id;
 	unsigned int ep_index;
 
-	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 	/* This command will only fail if the endpoint wasn't halted,
 	 * but we don't care.
 	 */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
-		"Ignoring reset ep completion code of %u",
-		 GET_COMP_CODE(le32_to_cpu(event->status)));
+		"Ignoring reset ep completion code of %u", cmd_comp_code);
 
 	/* HW with the reset endpoint quirk needs to have a configure endpoint
 	 * command complete before the endpoint can be used.  Queue that here
@@ -1386,21 +1374,149 @@
 	return cur_trb_is_good;
 }
 
+static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
+		u32 cmd_comp_code)
+{
+	if (cmd_comp_code == COMP_SUCCESS)
+		xhci->slot_id = slot_id;
+	else
+		xhci->slot_id = 0;
+	complete(&xhci->addr_dev);
+}
+
+static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *virt_dev;
+
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev)
+		return;
+	if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
+		/* Delete default control endpoint resources */
+		xhci_free_device_endpoint_resources(xhci, virt_dev, true);
+	xhci_free_virt_device(xhci, slot_id);
+}
+
+static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
+		struct xhci_event_cmd *event, u32 cmd_comp_code)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	unsigned int ep_state;
+	u32 add_flags, drop_flags;
+
+	virt_dev = xhci->devs[slot_id];
+	if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
+		return;
+	/*
+	 * Configure endpoint commands can come from the USB core
+	 * configuration or alt setting changes, or because the HW
+	 * needed an extra configure endpoint command after a reset
+	 * endpoint command or streams were being configured.
+	 * If the command was for a halted endpoint, the xHCI driver
+	 * is not waiting on the configure endpoint command.
+	 */
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "Could not get input context, bad type.\n");
+		return;
+	}
+
+	add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+	drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
+	/* Input ctx add_flags are the endpoint index plus one */
+	ep_index = xhci_last_valid_endpoint(add_flags) - 1;
+
+	/* A usb_set_interface() call directly after clearing a halted
+	 * condition may race on this quirky hardware.  Not worth
+	 * worrying about, since this is prototype hardware.  Not sure
+	 * if this will work for streams, but streams support was
+	 * untested on this prototype.
+	 */
+	if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
+			ep_index != (unsigned int) -1 &&
+			add_flags - SLOT_FLAG == drop_flags) {
+		ep_state = virt_dev->eps[ep_index].ep_state;
+		if (!(ep_state & EP_HALTED))
+			goto bandwidth_change;
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Completed config ep cmd - "
+				"last ep index = %d, state = %d",
+				ep_index, ep_state);
+		/* Clear internal halted state and restart ring(s) */
+		virt_dev->eps[ep_index].ep_state &= ~EP_HALTED;
+		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+		return;
+	}
+bandwidth_change:
+	xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+			"Completed config ep cmd");
+	virt_dev->cmd_status = cmd_comp_code;
+	complete(&virt_dev->cmd_completion);
+	return;
+}
+
+static void xhci_handle_cmd_eval_ctx(struct xhci_hcd *xhci, int slot_id,
+		struct xhci_event_cmd *event, u32 cmd_comp_code)
+{
+	struct xhci_virt_device *virt_dev;
+
+	virt_dev = xhci->devs[slot_id];
+	if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
+		return;
+	virt_dev->cmd_status = cmd_comp_code;
+	complete(&virt_dev->cmd_completion);
+}
+
+static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id,
+		u32 cmd_comp_code)
+{
+	xhci->devs[slot_id]->cmd_status = cmd_comp_code;
+	complete(&xhci->addr_dev);
+}
+
+static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id,
+		struct xhci_event_cmd *event)
+{
+	struct xhci_virt_device *virt_dev;
+
+	xhci_dbg(xhci, "Completed reset device command.\n");
+	virt_dev = xhci->devs[slot_id];
+	if (virt_dev)
+		handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
+	else
+		xhci_warn(xhci, "Reset device command completion "
+				"for disabled slot %u\n", slot_id);
+}
+
+static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci,
+		struct xhci_event_cmd *event)
+{
+	if (!(xhci->quirks & XHCI_NEC_HOST)) {
+		xhci->error_bitmask |= 1 << 6;
+		return;
+	}
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"NEC firmware version %2x.%02x",
+			NEC_FW_MAJOR(le32_to_cpu(event->status)),
+			NEC_FW_MINOR(le32_to_cpu(event->status)));
+}
+
 static void handle_cmd_completion(struct xhci_hcd *xhci,
 		struct xhci_event_cmd *event)
 {
 	int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
 	u64 cmd_dma;
 	dma_addr_t cmd_dequeue_dma;
-	struct xhci_input_control_ctx *ctrl_ctx;
-	struct xhci_virt_device *virt_dev;
-	unsigned int ep_index;
-	struct xhci_ring *ep_ring;
-	unsigned int ep_state;
+	u32 cmd_comp_code;
+	union xhci_trb *cmd_trb;
+	u32 cmd_type;
 
 	cmd_dma = le64_to_cpu(event->cmd_trb);
+	cmd_trb = xhci->cmd_ring->dequeue;
 	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
-			xhci->cmd_ring->dequeue);
+			cmd_trb);
 	/* Is the command ring deq ptr out of sync with the deq seg ptr? */
 	if (cmd_dequeue_dma == 0) {
 		xhci->error_bitmask |= 1 << 4;
@@ -1412,19 +1528,17 @@
 		return;
 	}
 
-	trace_xhci_cmd_completion(&xhci->cmd_ring->dequeue->generic,
-					(struct xhci_generic_trb *) event);
+	trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
 
-	if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) ||
-		(GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) {
+	cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
+	if (cmd_comp_code == COMP_CMD_ABORT || cmd_comp_code == COMP_CMD_STOP) {
 		/* If the return value is 0, we think the trb pointed by
 		 * command ring dequeue pointer is a good trb. The good
 		 * trb means we don't want to cancel the trb, but it have
 		 * been stopped by host. So we should handle it normally.
 		 * Otherwise, driver should invoke inc_deq() and return.
 		 */
-		if (handle_stopped_cmd_ring(xhci,
-				GET_COMP_CODE(le32_to_cpu(event->status)))) {
+		if (handle_stopped_cmd_ring(xhci, cmd_comp_code)) {
 			inc_deq(xhci, xhci->cmd_ring);
 			return;
 		}
@@ -1436,117 +1550,47 @@
 			return;
 	}
 
-	switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])
-		& TRB_TYPE_BITMASK) {
-	case TRB_TYPE(TRB_ENABLE_SLOT):
-		if (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_SUCCESS)
-			xhci->slot_id = slot_id;
-		else
-			xhci->slot_id = 0;
-		complete(&xhci->addr_dev);
+	cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
+	switch (cmd_type) {
+	case TRB_ENABLE_SLOT:
+		xhci_handle_cmd_enable_slot(xhci, slot_id, cmd_comp_code);
 		break;
-	case TRB_TYPE(TRB_DISABLE_SLOT):
-		if (xhci->devs[slot_id]) {
-			if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
-				/* Delete default control endpoint resources */
-				xhci_free_device_endpoint_resources(xhci,
-						xhci->devs[slot_id], true);
-			xhci_free_virt_device(xhci, slot_id);
-		}
+	case TRB_DISABLE_SLOT:
+		xhci_handle_cmd_disable_slot(xhci, slot_id);
 		break;
-	case TRB_TYPE(TRB_CONFIG_EP):
-		virt_dev = xhci->devs[slot_id];
-		if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
-			break;
-		/*
-		 * Configure endpoint commands can come from the USB core
-		 * configuration or alt setting changes, or because the HW
-		 * needed an extra configure endpoint command after a reset
-		 * endpoint command or streams were being configured.
-		 * If the command was for a halted endpoint, the xHCI driver
-		 * is not waiting on the configure endpoint command.
-		 */
-		ctrl_ctx = xhci_get_input_control_ctx(xhci,
-				virt_dev->in_ctx);
-		if (!ctrl_ctx) {
-			xhci_warn(xhci, "Could not get input context, bad type.\n");
-			break;
-		}
-		/* Input ctx add_flags are the endpoint index plus one */
-		ep_index = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)) - 1;
-		/* A usb_set_interface() call directly after clearing a halted
-		 * condition may race on this quirky hardware.  Not worth
-		 * worrying about, since this is prototype hardware.  Not sure
-		 * if this will work for streams, but streams support was
-		 * untested on this prototype.
-		 */
-		if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
-				ep_index != (unsigned int) -1 &&
-		    le32_to_cpu(ctrl_ctx->add_flags) - SLOT_FLAG ==
-		    le32_to_cpu(ctrl_ctx->drop_flags)) {
-			ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
-			ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
-			if (!(ep_state & EP_HALTED))
-				goto bandwidth_change;
-			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
-					"Completed config ep cmd - "
-					"last ep index = %d, state = %d",
-					ep_index, ep_state);
-			/* Clear internal halted state and restart ring(s) */
-			xhci->devs[slot_id]->eps[ep_index].ep_state &=
-				~EP_HALTED;
-			ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
-			break;
-		}
-bandwidth_change:
-		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
-				"Completed config ep cmd");
-		xhci->devs[slot_id]->cmd_status =
-			GET_COMP_CODE(le32_to_cpu(event->status));
-		complete(&xhci->devs[slot_id]->cmd_completion);
+	case TRB_CONFIG_EP:
+		xhci_handle_cmd_config_ep(xhci, slot_id, event, cmd_comp_code);
 		break;
-	case TRB_TYPE(TRB_EVAL_CONTEXT):
-		virt_dev = xhci->devs[slot_id];
-		if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
-			break;
-		xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status));
-		complete(&xhci->devs[slot_id]->cmd_completion);
+	case TRB_EVAL_CONTEXT:
+		xhci_handle_cmd_eval_ctx(xhci, slot_id, event, cmd_comp_code);
 		break;
-	case TRB_TYPE(TRB_ADDR_DEV):
-		xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status));
-		complete(&xhci->addr_dev);
+	case TRB_ADDR_DEV:
+		xhci_handle_cmd_addr_dev(xhci, slot_id, cmd_comp_code);
 		break;
-	case TRB_TYPE(TRB_STOP_RING):
-		handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue, event);
+	case TRB_STOP_RING:
+		WARN_ON(slot_id != TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3])));
+		xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb, event);
 		break;
-	case TRB_TYPE(TRB_SET_DEQ):
-		handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
+	case TRB_SET_DEQ:
+		WARN_ON(slot_id != TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3])));
+		xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code);
 		break;
-	case TRB_TYPE(TRB_CMD_NOOP):
+	case TRB_CMD_NOOP:
 		break;
-	case TRB_TYPE(TRB_RESET_EP):
-		handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
+	case TRB_RESET_EP:
+		WARN_ON(slot_id != TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3])));
+		xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code);
 		break;
-	case TRB_TYPE(TRB_RESET_DEV):
-		xhci_dbg(xhci, "Completed reset device command.\n");
-		slot_id = TRB_TO_SLOT_ID(
-			le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]));
-		virt_dev = xhci->devs[slot_id];
-		if (virt_dev)
-			handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
-		else
-			xhci_warn(xhci, "Reset device command completion "
-					"for disabled slot %u\n", slot_id);
+	case TRB_RESET_DEV:
+		WARN_ON(slot_id != TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3])));
+		xhci_handle_cmd_reset_dev(xhci, slot_id, event);
 		break;
-	case TRB_TYPE(TRB_NEC_GET_FW):
-		if (!(xhci->quirks & XHCI_NEC_HOST)) {
-			xhci->error_bitmask |= 1 << 6;
-			break;
-		}
-		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
-			"NEC firmware version %2x.%02x",
-			 NEC_FW_MAJOR(le32_to_cpu(event->status)),
-			 NEC_FW_MINOR(le32_to_cpu(event->status)));
+	case TRB_NEC_GET_FW:
+		xhci_handle_cmd_nec_get_fw(xhci, event);
 		break;
 	default:
 		/* Skip over unknown commands on the event ring */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6e0d886..4265b48 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3459,7 +3459,7 @@
 	/* Wait for the Reset Device command to finish */
 	timeleft = wait_for_completion_interruptible_timeout(
 			reset_device_cmd->completion,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for reset device command\n",
 				timeleft == 0 ? "Timeout" : "Signal");
@@ -3583,11 +3583,6 @@
 		del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
 	}
 
-	if (udev->usb2_hw_lpm_enabled) {
-		xhci_set_usb2_hardware_lpm(hcd, udev, 0);
-		udev->usb2_hw_lpm_enabled = 0;
-	}
-
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* Don't disable the slot if the host controller is dead. */
 	state = xhci_readl(xhci, &xhci->op_regs->status);
@@ -3721,9 +3716,6 @@
  * the device).
  * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
  * we should only issue and wait on one address command at the same time.
- *
- * We add one to the device address issued by the hardware because the USB core
- * uses address 1 for the root hubs (even though they're not really devices).
  */
 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 {
@@ -3868,16 +3860,13 @@
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
 	trace_xhci_address_ctx(xhci, virt_dev->out_ctx,
 				slot_ctx->dev_info >> 27);
-	/* Use kernel assigned address for devices; store xHC assigned
-	 * address locally. */
-	virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
-		+ 1;
 	/* Zero the input context control for later use */
 	ctrl_ctx->add_flags = 0;
 	ctrl_ctx->drop_flags = 0;
 
 	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
-			"Internal device address = %d", virt_dev->address);
+		       "Internal device address = %d",
+		       le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
 
 	return 0;
 }
@@ -4025,133 +4014,6 @@
 	return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm);
 }
 
-static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
-					struct usb_device *udev)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	struct dev_info	*dev_info;
-	__le32 __iomem	**port_array;
-	__le32 __iomem	*addr, *pm_addr;
-	u32		temp, dev_id;
-	unsigned int	port_num;
-	unsigned long	flags;
-	int		hird;
-	int		ret;
-
-	if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support ||
-			!udev->lpm_capable)
-		return -EINVAL;
-
-	/* we only support lpm for non-hub device connected to root hub yet */
-	if (!udev->parent || udev->parent->parent ||
-			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
-		return -EINVAL;
-
-	spin_lock_irqsave(&xhci->lock, flags);
-
-	/* Look for devices in lpm_failed_devs list */
-	dev_id = le16_to_cpu(udev->descriptor.idVendor) << 16 |
-			le16_to_cpu(udev->descriptor.idProduct);
-	list_for_each_entry(dev_info, &xhci->lpm_failed_devs, list) {
-		if (dev_info->dev_id == dev_id) {
-			ret = -EINVAL;
-			goto finish;
-		}
-	}
-
-	port_array = xhci->usb2_ports;
-	port_num = udev->portnum - 1;
-
-	if (port_num > HCS_MAX_PORTS(xhci->hcs_params1)) {
-		xhci_dbg(xhci, "invalid port number %d\n", udev->portnum);
-		ret = -EINVAL;
-		goto finish;
-	}
-
-	/*
-	 * Test USB 2.0 software LPM.
-	 * FIXME: some xHCI 1.0 hosts may implement a new register to set up
-	 * hardware-controlled USB 2.0 LPM. See section 5.4.11 and 4.23.5.1.1.1
-	 * in the June 2011 errata release.
-	 */
-	xhci_dbg(xhci, "test port %d software LPM\n", port_num);
-	/*
-	 * Set L1 Device Slot and HIRD/BESL.
-	 * Check device's USB 2.0 extension descriptor to determine whether
-	 * HIRD or BESL shoule be used. See USB2.0 LPM errata.
-	 */
-	pm_addr = port_array[port_num] + PORTPMSC;
-	hird = xhci_calculate_hird_besl(xhci, udev);
-	temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird);
-	xhci_writel(xhci, temp, pm_addr);
-
-	/* Set port link state to U2(L1) */
-	addr = port_array[port_num];
-	xhci_set_link_state(xhci, port_array, port_num, XDEV_U2);
-
-	/* wait for ACK */
-	spin_unlock_irqrestore(&xhci->lock, flags);
-	msleep(10);
-	spin_lock_irqsave(&xhci->lock, flags);
-
-	/* Check L1 Status */
-	ret = xhci_handshake(xhci, pm_addr,
-			PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
-	if (ret != -ETIMEDOUT) {
-		/* enter L1 successfully */
-		temp = xhci_readl(xhci, addr);
-		xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n",
-				port_num, temp);
-		ret = 0;
-	} else {
-		temp = xhci_readl(xhci, pm_addr);
-		xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n",
-				port_num, temp & PORT_L1S_MASK);
-		ret = -EINVAL;
-	}
-
-	/* Resume the port */
-	xhci_set_link_state(xhci, port_array, port_num, XDEV_U0);
-
-	spin_unlock_irqrestore(&xhci->lock, flags);
-	msleep(10);
-	spin_lock_irqsave(&xhci->lock, flags);
-
-	/* Clear PLC */
-	xhci_test_and_clear_bit(xhci, port_array, port_num, PORT_PLC);
-
-	/* Check PORTSC to make sure the device is in the right state */
-	if (!ret) {
-		temp = xhci_readl(xhci, addr);
-		xhci_dbg(xhci, "resumed port %d status 0x%x\n",	port_num, temp);
-		if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) ||
-				(temp & PORT_PLS_MASK) != XDEV_U0) {
-			xhci_dbg(xhci, "port L1 resume fail\n");
-			ret = -EINVAL;
-		}
-	}
-
-	if (ret) {
-		/* Insert dev to lpm_failed_devs list */
-		xhci_warn(xhci, "device LPM test failed, may disconnect and "
-				"re-enumerate\n");
-		dev_info = kzalloc(sizeof(struct dev_info), GFP_ATOMIC);
-		if (!dev_info) {
-			ret = -ENOMEM;
-			goto finish;
-		}
-		dev_info->dev_id = dev_id;
-		INIT_LIST_HEAD(&dev_info->list);
-		list_add(&dev_info->list, &xhci->lpm_failed_devs);
-	} else {
-		xhci_ring_device(xhci, udev->slot_id);
-	}
-
-finish:
-	spin_unlock_irqrestore(&xhci->lock, flags);
-	return ret;
-}
-
 int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 			struct usb_device *udev, int enable)
 {
@@ -4228,7 +4090,7 @@
 		}
 
 		pm_val &= ~PORT_HIRD_MASK;
-		pm_val |= PORT_HIRD(hird) | PORT_RWE;
+		pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
 		xhci_writel(xhci, pm_val, pm_addr);
 		pm_val = xhci_readl(xhci, pm_addr);
 		pm_val |= PORT_HLE;
@@ -4236,7 +4098,7 @@
 		/* flush write */
 		xhci_readl(xhci, pm_addr);
 	} else {
-		pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
+		pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK | PORT_L1DS_MASK);
 		xhci_writel(xhci, pm_val, pm_addr);
 		/* flush write */
 		xhci_readl(xhci, pm_addr);
@@ -4279,24 +4141,26 @@
 int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	int		ret;
 	int		portnum = udev->portnum - 1;
 
-	ret = xhci_usb2_software_lpm_test(hcd, udev);
-	if (!ret) {
-		xhci_dbg(xhci, "software LPM test succeed\n");
-		if (xhci->hw_lpm_support == 1 &&
-		    xhci_check_usb2_port_capability(xhci, portnum, XHCI_HLC)) {
-			udev->usb2_hw_lpm_capable = 1;
-			udev->l1_params.timeout = XHCI_L1_TIMEOUT;
-			udev->l1_params.besl = XHCI_DEFAULT_BESL;
-			if (xhci_check_usb2_port_capability(xhci, portnum,
-							    XHCI_BLC))
-				udev->usb2_hw_lpm_besl_capable = 1;
-			ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1);
-			if (!ret)
-				udev->usb2_hw_lpm_enabled = 1;
-		}
+	if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support ||
+			!udev->lpm_capable)
+		return 0;
+
+	/* we only support lpm for non-hub device connected to root hub yet */
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return 0;
+
+	if (xhci->hw_lpm_support == 1 &&
+			xhci_check_usb2_port_capability(
+				xhci, portnum, XHCI_HLC)) {
+		udev->usb2_hw_lpm_capable = 1;
+		udev->l1_params.timeout = XHCI_L1_TIMEOUT;
+		udev->l1_params.besl = XHCI_DEFAULT_BESL;
+		if (xhci_check_usb2_port_capability(xhci, portnum,
+					XHCI_BLC))
+			udev->usb2_hw_lpm_besl_capable = 1;
 	}
 
 	return 0;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 941d5f5..03c74b7 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -383,6 +383,7 @@
 #define	PORT_RWE		(1 << 3)
 #define	PORT_HIRD(p)		(((p) & 0xf) << 4)
 #define	PORT_HIRD_MASK		(0xf << 4)
+#define	PORT_L1DS_MASK		(0xff << 8)
 #define	PORT_L1DS(p)		(((p) & 0xff) << 8)
 #define	PORT_HLE		(1 << 16)
 
@@ -934,8 +935,6 @@
 	/* Rings saved to ensure old alt settings can be re-instated */
 	struct xhci_ring		**ring_cache;
 	int				num_rings_cached;
-	/* Store xHC assigned device address */
-	int				address;
 #define	XHCI_MAX_RINGS_CACHED	31
 	struct xhci_virt_ep		eps[31];
 	struct completion		cmd_completion;
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index aa28ac8..b415282 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -120,7 +120,7 @@
 			struct usb_host_endpoint	*e;
 
 			e = alt->endpoint + ep;
-			switch (e->desc.bmAttributes) {
+			switch (usb_endpoint_type(&e->desc)) {
 			case USB_ENDPOINT_XFER_BULK:
 				break;
 			case USB_ENDPOINT_XFER_ISOC:
@@ -437,7 +437,7 @@
 	if (max == 0)
 		return NULL;
 
-	sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL);
+	sg = kmalloc_array(nents, sizeof(*sg), GFP_KERNEL);
 	if (!sg)
 		return NULL;
 	sg_init_table(sg, nents);
@@ -573,7 +573,7 @@
 {
 	struct usb_config_descriptor	*config;
 
-	if (len < sizeof *config)
+	if (len < sizeof(*config))
 		return 0;
 	config = (struct usb_config_descriptor *) tdev->buf;
 
@@ -606,6 +606,76 @@
 	return 0;
 }
 
+static int is_good_ext(struct usbtest_dev *tdev, u8 *buf)
+{
+	struct usb_ext_cap_descriptor *ext;
+	u32 attr;
+
+	ext = (struct usb_ext_cap_descriptor *) buf;
+
+	if (ext->bLength != USB_DT_USB_EXT_CAP_SIZE) {
+		ERROR(tdev, "bogus usb 2.0 extension descriptor length\n");
+		return 0;
+	}
+
+	attr = le32_to_cpu(ext->bmAttributes);
+	/* bits[1:4] is used and others are reserved */
+	if (attr & ~0x1e) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_good_ss_cap(struct usbtest_dev *tdev, u8 *buf)
+{
+	struct usb_ss_cap_descriptor *ss;
+
+	ss = (struct usb_ss_cap_descriptor *) buf;
+
+	if (ss->bLength != USB_DT_USB_SS_CAP_SIZE) {
+		ERROR(tdev, "bogus superspeed device capability descriptor length\n");
+		return 0;
+	}
+
+	/*
+	 * only bit[1] of bmAttributes is used for LTM and others are
+	 * reserved
+	 */
+	if (ss->bmAttributes & ~0x02) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set in bmAttributes\n");
+		return 0;
+	}
+
+	/* bits[0:3] of wSpeedSupported is used and others are reserved */
+	if (le16_to_cpu(ss->wSpeedSupported) & ~0x0f) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set in wSpeedSupported\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_good_con_id(struct usbtest_dev *tdev, u8 *buf)
+{
+	struct usb_ss_container_id_descriptor *con_id;
+
+	con_id = (struct usb_ss_container_id_descriptor *) buf;
+
+	if (con_id->bLength != USB_DT_USB_SS_CONTN_ID_SIZE) {
+		ERROR(tdev, "bogus container id descriptor length\n");
+		return 0;
+	}
+
+	if (con_id->bReserved) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set\n");
+		return 0;
+	}
+
+	return 1;
+}
+
 /* sanity test for standard requests working with usb_control_mesg() and some
  * of the utility functions which use it.
  *
@@ -683,12 +753,96 @@
 
 	/* there's always [9.4.3] a device descriptor [9.6.1] */
 	retval = usb_get_descriptor(udev, USB_DT_DEVICE, 0,
-			dev->buf, sizeof udev->descriptor);
-	if (retval != sizeof udev->descriptor) {
+			dev->buf, sizeof(udev->descriptor));
+	if (retval != sizeof(udev->descriptor)) {
 		dev_err(&iface->dev, "dev descriptor --> %d\n", retval);
 		return (retval < 0) ? retval : -EDOM;
 	}
 
+	/*
+	 * there's always [9.4.3] a bos device descriptor [9.6.2] in USB
+	 * 3.0 spec
+	 */
+	if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0300) {
+		struct usb_bos_descriptor *bos = NULL;
+		struct usb_dev_cap_header *header = NULL;
+		unsigned total, num, length;
+		u8 *buf;
+
+		retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf,
+				sizeof(*udev->bos->desc));
+		if (retval != sizeof(*udev->bos->desc)) {
+			dev_err(&iface->dev, "bos descriptor --> %d\n", retval);
+			return (retval < 0) ? retval : -EDOM;
+		}
+
+		bos = (struct usb_bos_descriptor *)dev->buf;
+		total = le16_to_cpu(bos->wTotalLength);
+		num = bos->bNumDeviceCaps;
+
+		if (total > TBUF_SIZE)
+			total = TBUF_SIZE;
+
+		/*
+		 * get generic device-level capability descriptors [9.6.2]
+		 * in USB 3.0 spec
+		 */
+		retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf,
+				total);
+		if (retval != total) {
+			dev_err(&iface->dev, "bos descriptor set --> %d\n",
+					retval);
+			return (retval < 0) ? retval : -EDOM;
+		}
+
+		length = sizeof(*udev->bos->desc);
+		buf = dev->buf;
+		for (i = 0; i < num; i++) {
+			buf += length;
+			if (buf + sizeof(struct usb_dev_cap_header) >
+					dev->buf + total)
+				break;
+
+			header = (struct usb_dev_cap_header *)buf;
+			length = header->bLength;
+
+			if (header->bDescriptorType !=
+					USB_DT_DEVICE_CAPABILITY) {
+				dev_warn(&udev->dev, "not device capability descriptor, skip\n");
+				continue;
+			}
+
+			switch (header->bDevCapabilityType) {
+			case USB_CAP_TYPE_EXT:
+				if (buf + USB_DT_USB_EXT_CAP_SIZE >
+						dev->buf + total ||
+						!is_good_ext(dev, buf)) {
+					dev_err(&iface->dev, "bogus usb 2.0 extension descriptor\n");
+					return -EDOM;
+				}
+				break;
+			case USB_SS_CAP_TYPE:
+				if (buf + USB_DT_USB_SS_CAP_SIZE >
+						dev->buf + total ||
+						!is_good_ss_cap(dev, buf)) {
+					dev_err(&iface->dev, "bogus superspeed device capability descriptor\n");
+					return -EDOM;
+				}
+				break;
+			case CONTAINER_ID_TYPE:
+				if (buf + USB_DT_USB_SS_CONTN_ID_SIZE >
+						dev->buf + total ||
+						!is_good_con_id(dev, buf)) {
+					dev_err(&iface->dev, "bogus container id descriptor\n");
+					return -EDOM;
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
 	/* there's always [9.4.3] at least one config descriptor [9.6.3] */
 	for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
 		retval = usb_get_descriptor(udev, USB_DT_CONFIG, i,
@@ -954,7 +1108,7 @@
 		 * device, but some are chosen to trigger protocol stalls
 		 * or short reads.
 		 */
-		memset(&req, 0, sizeof req);
+		memset(&req, 0, sizeof(req));
 		req.bRequest = USB_REQ_GET_DESCRIPTOR;
 		req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
 
@@ -1074,7 +1228,7 @@
 		if (!u)
 			goto cleanup;
 
-		reqp = kmalloc(sizeof *reqp, GFP_KERNEL);
+		reqp = kmalloc(sizeof(*reqp), GFP_KERNEL);
 		if (!reqp)
 			goto cleanup;
 		reqp->setup = req;
@@ -1667,13 +1821,13 @@
 	if (param->sglen > 10)
 		return -EDOM;
 
-	memset(&context, 0, sizeof context);
+	memset(&context, 0, sizeof(context));
 	context.count = param->iterations * param->sglen;
 	context.dev = dev;
 	init_completion(&context.done);
 	spin_lock_init(&context.lock);
 
-	memset(urbs, 0, sizeof urbs);
+	memset(urbs, 0, sizeof(urbs));
 	udev = testdev_to_usbdev(dev);
 	dev_info(&dev->intf->dev,
 		"... iso period %d %sframes, wMaxPacket %04x\n",
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index c258a97..57dfc0c 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -75,6 +75,7 @@
 config USB_MUSB_OMAP2PLUS
 	tristate "OMAP2430 and onwards"
 	depends on ARCH_OMAP2PLUS
+	select GENERIC_PHY
 
 config USB_MUSB_AM35X
 	tristate "AM35x"
@@ -90,7 +91,7 @@
 	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
 
 config USB_MUSB_UX500
-	tristate "U8500 and U5500"
+	tristate "Ux500 platforms"
 
 endchoice
 
@@ -112,7 +113,7 @@
 	  allow using DMA on multiplatform kernels.
 
 config USB_UX500_DMA
-	bool 'ST Ericsson U8500 and U5500'
+	bool 'ST Ericsson Ux500'
 	depends on USB_MUSB_UX500
 	help
 	  Enable DMA transfers on UX500 platforms.
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 5c310c6..ca45b39 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -89,7 +89,6 @@
 	struct clk		*phy_clk;
 	struct clk		*clk;
 };
-#define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
 /*
  * am35x_musb_enable - enable interrupts
@@ -452,14 +451,18 @@
 	.set_vbus	= am35x_musb_set_vbus,
 };
 
-static u64 am35x_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info am35x_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int am35x_probe(struct platform_device *pdev)
 {
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct am35x_glue		*glue;
-
+	struct platform_device_info	pinfo;
 	struct clk			*phy_clk;
 	struct clk			*clk;
 
@@ -471,12 +474,6 @@
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
 	phy_clk = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(phy_clk)) {
 		dev_err(&pdev->dev, "failed to get PHY clock\n");
@@ -503,12 +500,7 @@
 		goto err6;
 	}
 
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &am35x_dmamask;
-	musb->dev.coherent_dma_mask	= am35x_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 	glue->phy_clk			= phy_clk;
 	glue->clk			= clk;
 
@@ -516,22 +508,17 @@
 
 	platform_set_drvdata(pdev, glue);
 
-	ret = platform_device_add_resources(musb, pdev->resource,
-			pdev->num_resources);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err7;
-	}
+	pinfo = am35x_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = pdev->resource;
+	pinfo.num_res = pdev->num_resources;
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
 
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err7;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err7;
 	}
 
@@ -550,9 +537,6 @@
 	clk_put(phy_clk);
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:
@@ -615,23 +599,16 @@
 
 	return 0;
 }
-
-static struct dev_pm_ops am35x_pm_ops = {
-	.suspend	= am35x_suspend,
-	.resume		= am35x_resume,
-};
-
-#define DEV_PM_OPS	&am35x_pm_ops
-#else
-#define DEV_PM_OPS	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(am35x_pm_ops, am35x_suspend, am35x_resume);
+
 static struct platform_driver am35x_driver = {
 	.probe		= am35x_probe,
 	.remove		= am35x_remove,
 	.driver		= {
 		.name	= "musb-am35x",
-		.pm	= DEV_PM_OPS,
+		.pm	= &am35x_pm_ops,
 	},
 };
 
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 72e2056..d9692f7 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -561,23 +561,16 @@
 
 	return 0;
 }
-
-static struct dev_pm_ops bfin_pm_ops = {
-	.suspend	= bfin_suspend,
-	.resume		= bfin_resume,
-};
-
-#define DEV_PM_OPS	&bfin_pm_ops
-#else
-#define DEV_PM_OPS	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
+
 static struct platform_driver bfin_driver = {
 	.probe		= bfin_probe,
 	.remove		= __exit_p(bfin_remove),
 	.driver		= {
 		.name	= "musb-blackfin",
-		.pm	= DEV_PM_OPS,
+		.pm	= &bfin_pm_ops,
 	},
 };
 
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index d9ddf41..2f2c1cb 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -472,7 +472,11 @@
 	.set_vbus	= da8xx_musb_set_vbus,
 };
 
-static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info da8xx_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int da8xx_probe(struct platform_device *pdev)
 {
@@ -480,7 +484,7 @@
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct da8xx_glue		*glue;
-
+	struct platform_device_info	pinfo;
 	struct clk			*clk;
 
 	int				ret = -ENOMEM;
@@ -491,12 +495,6 @@
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
 	clk = clk_get(&pdev->dev, "usb20");
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -510,12 +508,7 @@
 		goto err4;
 	}
 
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &da8xx_dmamask;
-	musb->dev.coherent_dma_mask	= da8xx_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 	glue->clk			= clk;
 
 	pdata->platform_ops		= &da8xx_ops;
@@ -535,22 +528,17 @@
 	musb_resources[1].end = pdev->resource[1].end;
 	musb_resources[1].flags = pdev->resource[1].flags;
 
-	ret = platform_device_add_resources(musb, musb_resources,
-			ARRAY_SIZE(musb_resources));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err5;
-	}
+	pinfo = da8xx_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
 
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err5;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err5;
 	}
 
@@ -563,9 +551,6 @@
 	clk_put(clk);
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index ed0834e..1121fd7 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -505,14 +505,19 @@
 	.set_vbus	= davinci_musb_set_vbus,
 };
 
-static u64 davinci_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info davinci_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int davinci_probe(struct platform_device *pdev)
 {
-	struct resource musb_resources[2];
+	struct resource			musb_resources[3];
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct davinci_glue		*glue;
+	struct platform_device_info	pinfo;
 	struct clk			*clk;
 
 	int				ret = -ENOMEM;
@@ -523,12 +528,6 @@
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
 	clk = clk_get(&pdev->dev, "usb");
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -542,12 +541,7 @@
 		goto err4;
 	}
 
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &davinci_dmamask;
-	musb->dev.coherent_dma_mask	= davinci_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 	glue->clk			= clk;
 
 	pdata->platform_ops		= &davinci_ops;
@@ -567,22 +561,26 @@
 	musb_resources[1].end = pdev->resource[1].end;
 	musb_resources[1].flags = pdev->resource[1].flags;
 
-	ret = platform_device_add_resources(musb, musb_resources,
-			ARRAY_SIZE(musb_resources));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err5;
-	}
+	/*
+	 * For DM6467 3 resources are passed. A placeholder for the 3rd
+	 * resource is always there, so it's safe to always copy it...
+	 */
+	musb_resources[2].name = pdev->resource[2].name;
+	musb_resources[2].start = pdev->resource[2].start;
+	musb_resources[2].end = pdev->resource[2].end;
+	musb_resources[2].flags = pdev->resource[2].flags;
 
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err5;
-	}
+	pinfo = davinci_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
 
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err5;
 	}
 
@@ -595,9 +593,6 @@
 	clk_put(clk);
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:
diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c
index 41ac5b5..8be9b02 100644
--- a/drivers/usb/musb/musb_am335x.c
+++ b/drivers/usb/musb/musb_am335x.c
@@ -46,7 +46,7 @@
 	.remove         = am335x_child_remove,
 	.driver         = {
 		.name   = "am335x-usb-childs",
-		.of_match_table	= of_match_ptr(am335x_child_of_match),
+		.of_match_table	= am335x_child_of_match,
 	},
 };
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index cd70cc8..0a43329 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -617,7 +617,7 @@
 				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
 				default:
 					s = "VALID"; break;
-				}; s; }),
+				} s; }),
 				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
 				musb->port1_status);
 
@@ -1809,8 +1809,7 @@
 			disable_irq_wake(musb->nIrq);
 		free_irq(musb->nIrq, musb);
 	}
-	if (musb->dma_controller)
-		dma_controller_destroy(musb->dma_controller);
+	cancel_work_sync(&musb->irq_work);
 
 	musb_host_free(musb);
 }
@@ -1885,8 +1884,13 @@
 
 	pm_runtime_get_sync(musb->controller);
 
-	if (use_dma && dev->dma_mask)
+	if (use_dma && dev->dma_mask) {
 		musb->dma_controller = dma_controller_create(musb, musb->mregs);
+		if (IS_ERR(musb->dma_controller)) {
+			status = PTR_ERR(musb->dma_controller);
+			goto fail2_5;
+		}
+	}
 
 	/* be sure interrupts are disabled before connecting ISR */
 	musb_platform_disable(musb);
@@ -1946,6 +1950,8 @@
 		if (status < 0)
 			goto fail3;
 		status = musb_gadget_setup(musb);
+		if (status)
+			musb_host_cleanup(musb);
 		break;
 	default:
 		dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
@@ -1972,10 +1978,12 @@
 
 fail4:
 	musb_gadget_cleanup(musb);
+	musb_host_cleanup(musb);
 
 fail3:
 	if (musb->dma_controller)
 		dma_controller_destroy(musb->dma_controller);
+fail2_5:
 	pm_runtime_put_sync(musb->controller);
 
 fail2:
@@ -2032,6 +2040,9 @@
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
 
+	if (musb->dma_controller)
+		dma_controller_destroy(musb->dma_controller);
+
 	musb_free(musb);
 	device_init_wakeup(dev, 0);
 	return 0;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 1c5bf75..29f7cd7 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -46,6 +46,7 @@
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/musb.h>
+#include <linux/phy/phy.h>
 
 struct musb;
 struct musb_hw_ep;
@@ -341,6 +342,7 @@
 	u16			int_tx;
 
 	struct usb_phy		*xceiv;
+	struct phy		*phy;
 
 	int nIrq;
 	unsigned		irq_wake:1;
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index ae95974..ff9d6de 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -484,6 +484,7 @@
 		if (ret)
 			goto err;
 
+		ret = -EINVAL;
 		if (port > MUSB_DMA_NUM_CHANNELS || !port)
 			goto err;
 		if (is_tx)
@@ -503,6 +504,7 @@
 		dc = dma_request_slave_channel(dev, str);
 		if (!dc) {
 			dev_err(dev, "Falied to request %s.\n", str);
+			ret = -EPROBE_DEFER;
 			goto err;
 		}
 		cppi41_channel->dc = dc;
@@ -510,7 +512,7 @@
 	return 0;
 err:
 	cppi41_release_all_dma_chans(controller);
-	return -EINVAL;
+	return ret;
 }
 
 void dma_controller_destroy(struct dma_controller *c)
@@ -526,7 +528,7 @@
 					void __iomem *base)
 {
 	struct cppi41_dma_controller *controller;
-	int ret;
+	int ret = 0;
 
 	if (!musb->controller->of_node) {
 		dev_err(musb->controller, "Need DT for the DMA engine.\n");
@@ -553,5 +555,7 @@
 plat_get_fail:
 	kfree(controller);
 kzalloc_fail:
+	if (ret == -EPROBE_DEFER)
+		return ERR_PTR(ret);
 	return NULL;
 }
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index bd4138d..1901f6f 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -121,6 +121,43 @@
 	unsigned long last_timer;    /* last timer data for each instance */
 };
 
+static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (timeout == 0)
+		timeout = jiffies + msecs_to_jiffies(3);
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || (musb->a_wait_bcon == 0 &&
+				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+				usb_otg_state_string(musb->xceiv->state));
+		del_timer(&glue->timer);
+		glue->last_timer = jiffies;
+		return;
+	}
+	if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE)
+		return;
+
+	if (!musb->g.dev.driver)
+		return;
+
+	if (time_after(glue->last_timer, timeout) &&
+				timer_pending(&glue->timer)) {
+		dev_dbg(musb->controller,
+			"Longer idle timer already pending, ignoring...\n");
+		return;
+	}
+	glue->last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+		usb_otg_state_string(musb->xceiv->state),
+			jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&glue->timer, timeout);
+}
+
 /**
  * dsps_musb_enable - enable interrupts
  */
@@ -143,6 +180,7 @@
 	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
 	dsps_writel(reg_base, wrp->coreintr_set,
 		    (1 << wrp->drvvbus) << wrp->usb_shift);
+	dsps_musb_try_idle(musb, 0);
 }
 
 /**
@@ -171,6 +209,7 @@
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	u8 devctl;
 	unsigned long flags;
+	int skip_session = 0;
 
 	/*
 	 * We poll because DSPS IP's won't expose several OTG-critical
@@ -183,10 +222,12 @@
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
-		devctl &= ~MUSB_DEVCTL_SESSION;
-		dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+		dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+		skip_session = 1;
+		/* fall */
 
-		devctl = dsps_readb(musb->mregs, MUSB_DEVCTL);
+	case OTG_STATE_A_IDLE:
+	case OTG_STATE_B_IDLE:
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
 			musb->xceiv->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
@@ -194,60 +235,21 @@
 			musb->xceiv->state = OTG_STATE_A_IDLE;
 			MUSB_HST_MODE(musb);
 		}
+		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
+			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		dsps_writel(musb->ctrl_base, wrp->coreintr_set,
 			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
 		break;
-	case OTG_STATE_B_IDLE:
-		devctl = dsps_readb(mregs, MUSB_DEVCTL);
-		if (devctl & MUSB_DEVCTL_BDEVICE)
-			mod_timer(&glue->timer,
-					jiffies + wrp->poll_seconds * HZ);
-		else
-			musb->xceiv->state = OTG_STATE_A_IDLE;
-		break;
 	default:
 		break;
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
-	struct device *dev = musb->controller;
-	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-
-	if (timeout == 0)
-		timeout = jiffies + msecs_to_jiffies(3);
-
-	/* Never idle if active, or when VBUS timeout is not set as host */
-	if (musb->is_active || (musb->a_wait_bcon == 0 &&
-				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
-		dev_dbg(musb->controller, "%s active, deleting timer\n",
-				usb_otg_state_string(musb->xceiv->state));
-		del_timer(&glue->timer);
-		glue->last_timer = jiffies;
-		return;
-	}
-	if (musb->port_mode == MUSB_PORT_MODE_HOST)
-		return;
-
-	if (time_after(glue->last_timer, timeout) &&
-				timer_pending(&glue->timer)) {
-		dev_dbg(musb->controller,
-			"Longer idle timer already pending, ignoring...\n");
-		return;
-	}
-	glue->last_timer = timeout;
-
-	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		usb_otg_state_string(musb->xceiv->state),
-			jiffies_to_msecs(timeout - jiffies));
-	mod_timer(&glue->timer, timeout);
-}
-
 static irqreturn_t dsps_interrupt(int irq, void *hci)
 {
 	struct musb  *musb = hci;
@@ -443,7 +445,7 @@
 	case USB_DR_MODE_OTG:
 	default:
 		return MUSB_PORT_MODE_DUAL_ROLE;
-	};
+	}
 }
 
 static int dsps_create_musb_pdev(struct dsps_glue *glue,
@@ -631,7 +633,7 @@
 	.remove         = dsps_remove,
 	.driver         = {
 		.name   = "musb-dsps",
-		.of_match_table	= of_match_ptr(musb_dsps_of_match),
+		.of_match_table	= musb_dsps_of_match,
 	},
 };
 
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 3671898..d2d3a17 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1121,7 +1121,7 @@
 			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
 			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
 			default:			s = "iso"; break;
-			}; s; }),
+			} s; }),
 			musb_ep->is_in ? "IN" : "OUT",
 			musb_ep->dma ? "dma, " : "",
 			musb_ep->packet_sz);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 9a2b8c8..6582a20 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -253,7 +253,7 @@
 			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
 			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
 			default:			s = "-intr"; break;
-			}; s; }),
+			} s; }),
 			epnum, buf + offset, len);
 
 	/* Configure endpoint */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index d1d6b83..9af6bba 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -220,6 +220,23 @@
 	return retval;
 }
 
+static int musb_has_gadget(struct musb *musb)
+{
+	/*
+	 * In host-only mode we start a connection right away. In OTG mode
+	 * we have to wait until we loaded a gadget. We don't really need a
+	 * gadget if we operate as a host but we should not start a session
+	 * as a device without a gadget or else we explode.
+	 */
+#ifdef CONFIG_USB_MUSB_HOST
+	return 1;
+#else
+	if (musb->port_mode == MUSB_PORT_MODE_HOST)
+		return 1;
+	return musb->g.dev.driver != NULL;
+#endif
+}
+
 int musb_hub_control(
 	struct usb_hcd	*hcd,
 	u16		typeReq,
@@ -362,7 +379,7 @@
 			 * initialization logic, e.g. for OTG, or change any
 			 * logic relating to VBUS power-up.
 			 */
-			if (!hcd->self.is_b_host)
+			if (!hcd->self.is_b_host && musb_has_gadget(musb))
 				musb_start(musb);
 			break;
 		case USB_PORT_FEAT_RESET:
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 59d2245..2a408cd 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -38,6 +38,7 @@
 #include <linux/delay.h>
 #include <linux/usb/musb-omap.h>
 #include <linux/usb/omap_control_usb.h>
+#include <linux/of_platform.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
@@ -305,6 +306,9 @@
 	default:
 		dev_dbg(dev, "ID float\n");
 	}
+
+	atomic_notifier_call_chain(&musb->xceiv->notifier,
+			musb->xceiv->last_event, NULL);
 }
 
 
@@ -348,11 +352,21 @@
 	 * up through ULPI.  TWL4030-family PMICs include one,
 	 * which needs a driver, drivers aren't always needed.
 	 */
-	if (dev->parent->of_node)
+	if (dev->parent->of_node) {
+		musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+		/* We can't totally remove musb->xceiv as of now because
+		 * musb core uses xceiv.state and xceiv.otg. Once we have
+		 * a separate state machine to handle otg, these can be moved
+		 * out of xceiv and then we can start using the generic PHY
+		 * framework
+		 */
 		musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
 		    "usb-phy", 0);
-	else
+	} else {
 		musb->xceiv = devm_usb_get_phy_dev(dev, 0);
+		musb->phy = devm_phy_get(dev, "usb");
+	}
 
 	if (IS_ERR(musb->xceiv)) {
 		status = PTR_ERR(musb->xceiv);
@@ -364,6 +378,10 @@
 		return -EPROBE_DEFER;
 	}
 
+	if (IS_ERR(musb->phy)) {
+		pr_err("HS USB OTG: no PHY configured\n");
+		return PTR_ERR(musb->phy);
+	}
 	musb->isr = omap2430_musb_interrupt;
 
 	status = pm_runtime_get_sync(dev);
@@ -397,7 +415,7 @@
 	if (glue->status != OMAP_MUSB_UNKNOWN)
 		omap_musb_set_mailbox(glue);
 
-	usb_phy_init(musb->xceiv);
+	phy_init(musb->phy);
 
 	pm_runtime_put_noidle(musb->controller);
 	return 0;
@@ -460,6 +478,7 @@
 	del_timer_sync(&musb_idle_timer);
 
 	omap2430_low_level_exit(musb);
+	phy_exit(musb->phy);
 
 	return 0;
 }
@@ -509,8 +528,12 @@
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
 	glue->status			= OMAP_MUSB_UNKNOWN;
+	glue->control_otghs = ERR_PTR(-ENODEV);
 
 	if (np) {
+		struct device_node *control_node;
+		struct platform_device *control_pdev;
+
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 		if (!pdata) {
 			dev_err(&pdev->dev,
@@ -539,22 +562,20 @@
 		of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
 		of_property_read_u32(np, "power", (u32 *)&pdata->power);
 		config->multipoint = of_property_read_bool(np, "multipoint");
-		pdata->has_mailbox = of_property_read_bool(np,
-		    "ti,has-mailbox");
 
 		pdata->board_data	= data;
 		pdata->config		= config;
-	}
 
-	if (pdata->has_mailbox) {
-		glue->control_otghs = omap_get_control_dev();
-		if (IS_ERR(glue->control_otghs)) {
-			dev_vdbg(&pdev->dev, "Failed to get control device\n");
-			ret = PTR_ERR(glue->control_otghs);
-			goto err2;
+		control_node = of_parse_phandle(np, "ctrl-module", 0);
+		if (control_node) {
+			control_pdev = of_find_device_by_node(control_node);
+			if (!control_pdev) {
+				dev_err(&pdev->dev, "Failed to get control device\n");
+				ret = -EINVAL;
+				goto err2;
+			}
+			glue->control_otghs = &control_pdev->dev;
 		}
-	} else {
-		glue->control_otghs = ERR_PTR(-ENODEV);
 	}
 	pdata->platform_ops		= &omap2430_ops;
 
@@ -638,7 +659,7 @@
 				OTG_INTERFSEL);
 
 		omap2430_low_level_exit(musb);
-		usb_phy_set_suspend(musb->xceiv, 1);
+		phy_power_off(musb->phy);
 	}
 
 	return 0;
@@ -653,8 +674,7 @@
 		omap2430_low_level_init(musb);
 		musb_writel(musb->mregs, OTG_INTERFSEL,
 				musb->context.otg_interfsel);
-
-		usb_phy_set_suspend(musb->xceiv, 0);
+		phy_power_on(musb->phy);
 	}
 
 	return 0;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index b3b3ed7..4432314 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1152,7 +1152,11 @@
 	.set_vbus	= tusb_musb_set_vbus,
 };
 
-static u64 tusb_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info tusb_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int tusb_probe(struct platform_device *pdev)
 {
@@ -1160,7 +1164,7 @@
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct tusb6010_glue		*glue;
-
+	struct platform_device_info	pinfo;
 	int				ret = -ENOMEM;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -1169,18 +1173,7 @@
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &tusb_dmamask;
-	musb->dev.coherent_dma_mask	= tusb_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 
 	pdata->platform_ops		= &tusb_ops;
 
@@ -1204,31 +1197,23 @@
 	musb_resources[2].end = pdev->resource[2].end;
 	musb_resources[2].flags = pdev->resource[2].flags;
 
-	ret = platform_device_add_resources(musb, musb_resources,
-			ARRAY_SIZE(musb_resources));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err3;
-	}
+	pinfo = tusb_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
 
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err3;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err3;
 	}
 
 	return 0;
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 59256b1..122446b 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -259,7 +259,7 @@
 		goto err1;
 	}
 
-	clk = clk_get(&pdev->dev, "usb");
+	clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
@@ -376,17 +376,10 @@
 
 	return 0;
 }
-
-static const struct dev_pm_ops ux500_pm_ops = {
-	.suspend	= ux500_suspend,
-	.resume		= ux500_resume,
-};
-
-#define DEV_PM_OPS	(&ux500_pm_ops)
-#else
-#define DEV_PM_OPS	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume);
+
 static const struct of_device_id ux500_match[] = {
         { .compatible = "stericsson,db8500-musb", },
         {}
@@ -397,7 +390,7 @@
 	.remove		= ux500_remove,
 	.driver		= {
 		.name	= "musb-ux500",
-		.pm	= DEV_PM_OPS,
+		.pm	= &ux500_pm_ops,
 		.of_match_table = ux500_match,
 	},
 };
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index d5589f9..08e2f39 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -66,17 +66,6 @@
 	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 	  additional register to power on USB3 PHY.
 
-config OMAP_USB2
-	tristate "OMAP USB2 PHY Driver"
-	depends on ARCH_OMAP2PLUS
-	select OMAP_CONTROL_USB
-	select USB_PHY
-	help
-	  Enable this to support the transceiver that is part of SOC. This
-	  driver takes care of all the PHY functionality apart from comparator.
-	  The USB OTG controller communicates with the comparator using this
-	  driver.
-
 config OMAP_USB3
 	tristate "OMAP USB3 PHY Driver"
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
@@ -93,6 +82,7 @@
 
 config AM335X_PHY_USB
 	tristate "AM335x USB PHY Driver"
+	depends on ARM || COMPILE_TEST
 	select USB_PHY
 	select AM335X_CONTROL_USB
 	select NOP_USB_XCEIV
@@ -123,16 +113,6 @@
 	  Enable this to support Samsung USB 3.0 (Super Speed) phy controller
 	  for samsung SoCs.
 
-config TWL4030_USB
-	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
-	select USB_PHY
-	help
-	  Enable this to support the USB OTG transceiver on TWL4030
-	  family chips (including the TWL5030 and TPS659x0 devices).
-	  This transceiver supports high and full speed devices plus,
-	  in host mode, low speed.
-
 config TWL6030_USB
 	tristate "TWL6030 USB Transceiver Driver"
 	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
@@ -214,6 +194,19 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called phy-rcar-usb.
 
+config USB_RCAR_GEN2_PHY
+	tristate "Renesas R-Car Gen2 USB PHY support"
+	depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
+	select USB_PHY
+	help
+	  Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
+	  It is typically used to control internal USB PHY for USBHS,
+	  and to configure shared USB channels 0 and 2.
+	  This driver supports R8A7790 and R8A7791.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called phy-rcar-gen2-usb.
+
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 2135e85..022c1da 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -15,12 +15,10 @@
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= phy-omap-control.o
 obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
 obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
-obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= phy-omap-usb3.o
 obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
 obj-$(CONFIG_SAMSUNG_USB2PHY)		+= phy-samsung-usb2.o
 obj-$(CONFIG_SAMSUNG_USB3PHY)		+= phy-samsung-usb3.o
-obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
@@ -29,5 +27,6 @@
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
 obj-$(CONFIG_USB_RCAR_PHY)		+= phy-rcar-usb.o
+obj-$(CONFIG_USB_RCAR_GEN2_PHY)		+= phy-rcar-gen2-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
index 22cf07d..634f49a 100644
--- a/drivers/usb/phy/phy-am335x-control.c
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -26,6 +26,41 @@
 #define USBPHY_OTGVDET_EN	(1 << 19)
 #define USBPHY_OTGSESSEND_EN	(1 << 20)
 
+#define AM335X_PHY0_WK_EN	(1 << 0)
+#define AM335X_PHY1_WK_EN	(1 << 8)
+
+static void am335x_phy_wkup(struct  phy_control *phy_ctrl, u32 id, bool on)
+{
+	struct am335x_control_usb *usb_ctrl;
+	u32 val;
+	u32 reg;
+
+	usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+	switch (id) {
+	case 0:
+		reg = AM335X_PHY0_WK_EN;
+		break;
+	case 1:
+		reg = AM335X_PHY1_WK_EN;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	spin_lock(&usb_ctrl->lock);
+	val = readl(usb_ctrl->wkup);
+
+	if (on)
+		val |= reg;
+	else
+		val &= ~reg;
+
+	writel(val, usb_ctrl->wkup);
+	spin_unlock(&usb_ctrl->lock);
+}
+
 static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
 {
 	struct am335x_control_usb *usb_ctrl;
@@ -59,6 +94,7 @@
 
 static const struct phy_control ctrl_am335x = {
 	.phy_power = am335x_phy_power,
+	.phy_wkup = am335x_phy_wkup,
 };
 
 static const struct of_device_id omap_control_usb_id_table[] = {
@@ -117,6 +153,12 @@
 	ctrl_usb->phy_reg = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(ctrl_usb->phy_reg))
 		return PTR_ERR(ctrl_usb->phy_reg);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wakeup");
+	ctrl_usb->wkup = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ctrl_usb->wkup))
+		return PTR_ERR(ctrl_usb->wkup);
+
 	spin_lock_init(&ctrl_usb->lock);
 	ctrl_usb->phy_ctrl = *phy_ctrl;
 
@@ -129,7 +171,7 @@
 	.driver		= {
 		.name	= "am335x-control-usb",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(omap_control_usb_id_table),
+		.of_match_table = omap_control_usb_id_table,
 	},
 };
 
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index c4d614d..6370e50 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -53,21 +53,20 @@
 	}
 
 	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
-			USB_PHY_TYPE_USB2, 0, false, false);
+			USB_PHY_TYPE_USB2, 0, false);
 	if (ret)
 		return ret;
 
 	ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
 	if (ret)
-		goto err_add;
+		return ret;
 	am_phy->usb_phy_gen.phy.init = am335x_init;
 	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
 
 	platform_set_drvdata(pdev, am_phy);
+
 	return 0;
 
-err_add:
-	usb_phy_gen_cleanup_phy(&am_phy->usb_phy_gen);
 	return ret;
 }
 
@@ -79,6 +78,40 @@
 	return 0;
 }
 
+#ifdef CONFIG_PM_RUNTIME
+
+static int am335x_phy_runtime_suspend(struct device *dev)
+{
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(dev))
+		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+	return 0;
+}
+
+static int am335x_phy_runtime_resume(struct device *dev)
+{
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct am335x_phy	*am_phy = platform_get_drvdata(pdev);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+	if (device_may_wakeup(dev))
+		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false);
+	return 0;
+}
+
+static const struct dev_pm_ops am335x_pm_ops = {
+	SET_RUNTIME_PM_OPS(am335x_phy_runtime_suspend,
+			am335x_phy_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS	(&am335x_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
 static const struct of_device_id am335x_phy_ids[] = {
 	{ .compatible = "ti,am335x-usb-phy" },
 	{ }
@@ -91,7 +124,8 @@
 	.driver         = {
 		.name   = "am335x-phy-driver",
 		.owner  = THIS_MODULE,
-		.of_match_table = of_match_ptr(am335x_phy_ids),
+		.pm = DEV_PM_OPS,
+		.of_match_table = am335x_phy_ids,
 	},
 };
 
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index fa7c9f9..7f3c73b 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -134,7 +134,7 @@
 /* Operations that will be called from OTG Finite State Machine */
 
 /* Charge vbus for vbus pulsing in SRP */
-void fsl_otg_chrg_vbus(int on)
+void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -170,7 +170,7 @@
 }
 
 /* A-device driver vbus, controlled through PP bit in PORTSC */
-void fsl_otg_drv_vbus(int on)
+void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -188,7 +188,7 @@
  * Pull-up D+, signalling connect by periperal. Also used in
  * data-line pulsing in SRP
  */
-void fsl_otg_loc_conn(int on)
+void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -207,7 +207,7 @@
  * port.  In host mode, controller will automatically send SOF.
  * Suspend will block the data on the port.
  */
-void fsl_otg_loc_sof(int on)
+void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -222,7 +222,7 @@
 }
 
 /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
-void fsl_otg_start_pulse(void)
+void fsl_otg_start_pulse(struct otg_fsm *fsm)
 {
 	u32 tmp;
 
@@ -235,7 +235,7 @@
 	fsl_otg_loc_conn(1);
 #endif
 
-	fsl_otg_add_timer(b_data_pulse_tmr);
+	fsl_otg_add_timer(fsm, b_data_pulse_tmr);
 }
 
 void b_data_pulse_end(unsigned long foo)
@@ -252,14 +252,14 @@
 void fsl_otg_pulse_vbus(void)
 {
 	srp_wait_done = 0;
-	fsl_otg_chrg_vbus(1);
+	fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
 	/* start the timer to end vbus charge */
-	fsl_otg_add_timer(b_vbus_pulse_tmr);
+	fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
 }
 
 void b_vbus_pulse_end(unsigned long foo)
 {
-	fsl_otg_chrg_vbus(0);
+	fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
 
 	/*
 	 * As USB3300 using the same a_sess_vld and b_sess_vld voltage
@@ -267,7 +267,7 @@
 	 * residual voltage of vbus pulsing and A device pull up
 	 */
 	fsl_otg_dischrg_vbus(1);
-	fsl_otg_add_timer(b_srp_wait_tmr);
+	fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
 }
 
 void b_srp_end(unsigned long foo)
@@ -289,7 +289,7 @@
 {
 	VDBG("a_wait_enum timeout\n");
 	if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
-		fsl_otg_add_timer(a_wait_enum_tmr);
+		fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
 	else
 		otg_statemachine(&fsl_otg_dev->fsm);
 }
@@ -375,8 +375,42 @@
 	kfree(b_vbus_pulse_tmr);
 }
 
+static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	/* REVISIT: use array of pointers to timers instead */
+	switch (t) {
+	case A_WAIT_VRISE:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_WAIT_BCON:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_AIDL_BDIS:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_ASE0_BRST:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_SE0_SRP:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_SRP_FAIL:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_WAIT_ENUM:
+		timer = a_wait_vrise_tmr;
+		break;
+	default:
+		timer = NULL;
+	}
+
+	return timer;
+}
+
 /* Add timer to timer list */
-void fsl_otg_add_timer(void *gtimer)
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
 {
 	struct fsl_otg_timer *timer = gtimer;
 	struct fsl_otg_timer *tmp_timer;
@@ -394,8 +428,19 @@
 	list_add_tail(&timer->list, &active_timers);
 }
 
+static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	timer = fsl_otg_get_timer(t);
+	if (!timer)
+		return;
+
+	fsl_otg_add_timer(fsm, timer);
+}
+
 /* Remove timer from the timer list; clear timeout status */
-void fsl_otg_del_timer(void *gtimer)
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
 {
 	struct fsl_otg_timer *timer = gtimer;
 	struct fsl_otg_timer *tmp_timer, *del_tmp;
@@ -405,6 +450,17 @@
 			list_del(&timer->list);
 }
 
+static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	timer = fsl_otg_get_timer(t);
+	if (!timer)
+		return;
+
+	fsl_otg_del_timer(fsm, timer);
+}
+
 /*
  * Reduce timer count by 1, and find timeout conditions.
  * Called by fsl_otg 1ms timer interrupt
@@ -468,7 +524,7 @@
 				retval = dev->driver->pm->resume(dev);
 				if (fsm->id) {
 					/* default-b */
-					fsl_otg_drv_vbus(1);
+					fsl_otg_drv_vbus(fsm, 1);
 					/*
 					 * Workaround: b_host can't driver
 					 * vbus, but PP in PORTSC needs to
@@ -493,7 +549,7 @@
 					retval = dev->driver->pm->suspend(dev);
 				if (fsm->id)
 					/* default-b */
-					fsl_otg_drv_vbus(0);
+					fsl_otg_drv_vbus(fsm, 0);
 			}
 			otg_dev->host_working = 0;
 		}
@@ -757,8 +813,8 @@
 	.loc_sof = fsl_otg_loc_sof,
 	.start_pulse = fsl_otg_start_pulse,
 
-	.add_timer = fsl_otg_add_timer,
-	.del_timer = fsl_otg_del_timer,
+	.add_timer = fsl_otg_fsm_add_timer,
+	.del_timer = fsl_otg_fsm_del_timer,
 
 	.start_host = fsl_otg_start_host,
 	.start_gadget = fsl_otg_start_gadget,
@@ -1011,7 +1067,7 @@
 			"b_bus_suspend: %d\n"
 			"b_conn: %d\n"
 			"b_se0_srp: %d\n"
-			"b_sess_end: %d\n"
+			"b_ssend_srp: %d\n"
 			"b_sess_vld: %d\n"
 			"id: %d\n",
 			fsm->a_bus_req,
@@ -1026,7 +1082,7 @@
 			fsm->b_bus_suspend,
 			fsm->b_conn,
 			fsm->b_se0_srp,
-			fsm->b_sess_end,
+			fsm->b_ssend_srp,
 			fsm->b_sess_vld,
 			fsm->id);
 	size -= t;
@@ -1057,7 +1113,7 @@
 		break;
 
 	case SET_A_SUSPEND_REQ:
-		fsl_otg_dev->fsm.a_suspend_req = arg;
+		fsl_otg_dev->fsm.a_suspend_req_inf = arg;
 		break;
 
 	case SET_A_BUS_DROP:
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index e1859b8..7365170 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -401,6 +401,6 @@
 #define GET_A_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 8, int)
 #define GET_B_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 9, int)
 
-void fsl_otg_add_timer(void *timer);
-void fsl_otg_del_timer(void *timer);
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
 void fsl_otg_pulse_vbus(void);
diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c
index 7f45966..329c2d2 100644
--- a/drivers/usb/phy/phy-fsm-usb.c
+++ b/drivers/usb/phy/phy-fsm-usb.c
@@ -41,17 +41,17 @@
 			fsm->protocol, protocol);
 		/* stop old protocol */
 		if (fsm->protocol == PROTO_HOST)
-			ret = fsm->ops->start_host(fsm, 0);
+			ret = otg_start_host(fsm, 0);
 		else if (fsm->protocol == PROTO_GADGET)
-			ret = fsm->ops->start_gadget(fsm, 0);
+			ret = otg_start_gadget(fsm, 0);
 		if (ret)
 			return ret;
 
 		/* start new protocol */
 		if (protocol == PROTO_HOST)
-			ret = fsm->ops->start_host(fsm, 1);
+			ret = otg_start_host(fsm, 1);
 		else if (protocol == PROTO_GADGET)
-			ret = fsm->ops->start_gadget(fsm, 1);
+			ret = otg_start_gadget(fsm, 1);
 		if (ret)
 			return ret;
 
@@ -69,42 +69,50 @@
 {
 	switch (old_state) {
 	case OTG_STATE_B_IDLE:
-		otg_del_timer(fsm, b_se0_srp_tmr);
+		otg_del_timer(fsm, B_SE0_SRP);
 		fsm->b_se0_srp = 0;
+		fsm->adp_sns = 0;
+		fsm->adp_prb = 0;
 		break;
 	case OTG_STATE_B_SRP_INIT:
+		fsm->data_pulse = 0;
 		fsm->b_srp_done = 0;
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		break;
 	case OTG_STATE_B_WAIT_ACON:
-		otg_del_timer(fsm, b_ase0_brst_tmr);
+		otg_del_timer(fsm, B_ASE0_BRST);
 		fsm->b_ase0_brst_tmout = 0;
 		break;
 	case OTG_STATE_B_HOST:
 		break;
 	case OTG_STATE_A_IDLE:
+		fsm->adp_prb = 0;
 		break;
 	case OTG_STATE_A_WAIT_VRISE:
-		otg_del_timer(fsm, a_wait_vrise_tmr);
+		otg_del_timer(fsm, A_WAIT_VRISE);
 		fsm->a_wait_vrise_tmout = 0;
 		break;
 	case OTG_STATE_A_WAIT_BCON:
-		otg_del_timer(fsm, a_wait_bcon_tmr);
+		otg_del_timer(fsm, A_WAIT_BCON);
 		fsm->a_wait_bcon_tmout = 0;
 		break;
 	case OTG_STATE_A_HOST:
-		otg_del_timer(fsm, a_wait_enum_tmr);
+		otg_del_timer(fsm, A_WAIT_ENUM);
 		break;
 	case OTG_STATE_A_SUSPEND:
-		otg_del_timer(fsm, a_aidl_bdis_tmr);
+		otg_del_timer(fsm, A_AIDL_BDIS);
 		fsm->a_aidl_bdis_tmout = 0;
-		fsm->a_suspend_req = 0;
+		fsm->a_suspend_req_inf = 0;
 		break;
 	case OTG_STATE_A_PERIPHERAL:
+		otg_del_timer(fsm, A_BIDL_ADIS);
+		fsm->a_bidl_adis_tmout = 0;
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		otg_del_timer(fsm, a_wait_vrise_tmr);
+		otg_del_timer(fsm, A_WAIT_VFALL);
+		fsm->a_wait_vfall_tmout = 0;
+		otg_del_timer(fsm, A_WAIT_VRISE);
 		break;
 	case OTG_STATE_A_VBUS_ERR:
 		break;
@@ -127,14 +135,19 @@
 		otg_chrg_vbus(fsm, 0);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
+		/*
+		 * Driver is responsible for starting ADP probing
+		 * if ADP sensing times out.
+		 */
+		otg_start_adp_sns(fsm);
 		otg_set_protocol(fsm, PROTO_UNDEF);
-		otg_add_timer(fsm, b_se0_srp_tmr);
+		otg_add_timer(fsm, B_SE0_SRP);
 		break;
 	case OTG_STATE_B_SRP_INIT:
 		otg_start_pulse(fsm);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_UNDEF);
-		otg_add_timer(fsm, b_srp_fail_tmr);
+		otg_add_timer(fsm, B_SRP_FAIL);
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		otg_chrg_vbus(fsm, 0);
@@ -147,7 +160,7 @@
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, b_ase0_brst_tmr);
+		otg_add_timer(fsm, B_ASE0_BRST);
 		fsm->a_bus_suspend = 0;
 		break;
 	case OTG_STATE_B_HOST:
@@ -163,6 +176,7 @@
 		otg_chrg_vbus(fsm, 0);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
+		otg_start_adp_prb(fsm);
 		otg_set_protocol(fsm, PROTO_HOST);
 		break;
 	case OTG_STATE_A_WAIT_VRISE:
@@ -170,14 +184,14 @@
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, a_wait_vrise_tmr);
+		otg_add_timer(fsm, A_WAIT_VRISE);
 		break;
 	case OTG_STATE_A_WAIT_BCON:
 		otg_drv_vbus(fsm, 1);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, a_wait_bcon_tmr);
+		otg_add_timer(fsm, A_WAIT_BCON);
 		break;
 	case OTG_STATE_A_HOST:
 		otg_drv_vbus(fsm, 1);
@@ -188,15 +202,15 @@
 		 * When HNP is triggered while a_bus_req = 0, a_host will
 		 * suspend too fast to complete a_set_b_hnp_en
 		 */
-		if (!fsm->a_bus_req || fsm->a_suspend_req)
-			otg_add_timer(fsm, a_wait_enum_tmr);
+		if (!fsm->a_bus_req || fsm->a_suspend_req_inf)
+			otg_add_timer(fsm, A_WAIT_ENUM);
 		break;
 	case OTG_STATE_A_SUSPEND:
 		otg_drv_vbus(fsm, 1);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, a_aidl_bdis_tmr);
+		otg_add_timer(fsm, A_AIDL_BDIS);
 
 		break;
 	case OTG_STATE_A_PERIPHERAL:
@@ -204,12 +218,14 @@
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_GADGET);
 		otg_drv_vbus(fsm, 1);
+		otg_add_timer(fsm, A_BIDL_ADIS);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		otg_drv_vbus(fsm, 0);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_VFALL);
 		break;
 	case OTG_STATE_A_VBUS_ERR:
 		otg_drv_vbus(fsm, 0);
@@ -250,7 +266,8 @@
 			otg_set_state(fsm, OTG_STATE_A_IDLE);
 		else if (fsm->b_sess_vld && fsm->otg->gadget)
 			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-		else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
+		else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) &&
+				fsm->b_ssend_srp && fsm->b_se0_srp)
 			otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
 		break;
 	case OTG_STATE_B_SRP_INIT:
@@ -277,13 +294,14 @@
 	case OTG_STATE_B_HOST:
 		if (!fsm->id || !fsm->b_sess_vld)
 			otg_set_state(fsm, OTG_STATE_B_IDLE);
-		else if (!fsm->b_bus_req || !fsm->a_conn)
+		else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device)
 			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
 		break;
 	case OTG_STATE_A_IDLE:
 		if (fsm->id)
 			otg_set_state(fsm, OTG_STATE_B_IDLE);
-		else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det))
+		else if (!fsm->a_bus_drop && (fsm->a_bus_req ||
+			  fsm->a_srp_det || fsm->adp_change || fsm->power_up))
 			otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
 		break;
 	case OTG_STATE_A_WAIT_VRISE:
@@ -301,7 +319,7 @@
 			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
 		break;
 	case OTG_STATE_A_HOST:
-		if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
+		if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
 				fsm->otg->host->b_hnp_enable)
 			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
 		else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
@@ -324,14 +342,14 @@
 	case OTG_STATE_A_PERIPHERAL:
 		if (fsm->id || fsm->a_bus_drop)
 			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-		else if (fsm->b_bus_suspend)
+		else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend)
 			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
 		else if (!fsm->a_vbus_vld)
 			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld &&
-					!fsm->b_conn))
+		if (fsm->a_wait_vfall_tmout || fsm->id || fsm->a_bus_req ||
+				(!fsm->a_sess_vld && !fsm->b_conn))
 			otg_set_state(fsm, OTG_STATE_A_IDLE);
 		break;
 	case OTG_STATE_A_VBUS_ERR:
diff --git a/drivers/usb/phy/phy-fsm-usb.h b/drivers/usb/phy/phy-fsm-usb.h
index fbe5862..7441b46 100644
--- a/drivers/usb/phy/phy-fsm-usb.h
+++ b/drivers/usb/phy/phy-fsm-usb.h
@@ -34,45 +34,76 @@
 #define PROTO_HOST	(1)
 #define PROTO_GADGET	(2)
 
+enum otg_fsm_timer {
+	/* Standard OTG timers */
+	A_WAIT_VRISE,
+	A_WAIT_VFALL,
+	A_WAIT_BCON,
+	A_AIDL_BDIS,
+	B_ASE0_BRST,
+	A_BIDL_ADIS,
+
+	/* Auxiliary timers */
+	B_SE0_SRP,
+	B_SRP_FAIL,
+	A_WAIT_ENUM,
+
+	NUM_OTG_FSM_TIMERS,
+};
+
 /* OTG state machine according to the OTG spec */
 struct otg_fsm {
 	/* Input */
+	int id;
+	int adp_change;
+	int power_up;
+	int test_device;
+	int a_bus_drop;
+	int a_bus_req;
+	int a_srp_det;
+	int a_vbus_vld;
+	int b_conn;
 	int a_bus_resume;
 	int a_bus_suspend;
 	int a_conn;
+	int b_bus_req;
+	int b_se0_srp;
+	int b_ssend_srp;
+	int b_sess_vld;
+	/* Auxilary inputs */
 	int a_sess_vld;
-	int a_srp_det;
-	int a_vbus_vld;
 	int b_bus_resume;
 	int b_bus_suspend;
-	int b_conn;
-	int b_se0_srp;
-	int b_sess_end;
-	int b_sess_vld;
-	int id;
+
+	/* Output */
+	int data_pulse;
+	int drv_vbus;
+	int loc_conn;
+	int loc_sof;
+	int adp_prb;
+	int adp_sns;
 
 	/* Internal variables */
 	int a_set_b_hnp_en;
 	int b_srp_done;
 	int b_hnp_enable;
+	int a_clr_err;
+
+	/* Informative variables */
+	int a_bus_drop_inf;
+	int a_bus_req_inf;
+	int a_clr_err_inf;
+	int b_bus_req_inf;
+	/* Auxilary informative variables */
+	int a_suspend_req_inf;
 
 	/* Timeout indicator for timers */
 	int a_wait_vrise_tmout;
+	int a_wait_vfall_tmout;
 	int a_wait_bcon_tmout;
 	int a_aidl_bdis_tmout;
 	int b_ase0_brst_tmout;
-
-	/* Informative variables */
-	int a_bus_drop;
-	int a_bus_req;
-	int a_clr_err;
-	int a_suspend_req;
-	int b_bus_req;
-
-	/* Output */
-	int drv_vbus;
-	int loc_conn;
-	int loc_sof;
+	int a_bidl_adis_tmout;
 
 	struct otg_fsm_ops *ops;
 	struct usb_otg *otg;
@@ -83,65 +114,123 @@
 };
 
 struct otg_fsm_ops {
-	void	(*chrg_vbus)(int on);
-	void	(*drv_vbus)(int on);
-	void	(*loc_conn)(int on);
-	void	(*loc_sof)(int on);
-	void	(*start_pulse)(void);
-	void	(*add_timer)(void *timer);
-	void	(*del_timer)(void *timer);
+	void	(*chrg_vbus)(struct otg_fsm *fsm, int on);
+	void	(*drv_vbus)(struct otg_fsm *fsm, int on);
+	void	(*loc_conn)(struct otg_fsm *fsm, int on);
+	void	(*loc_sof)(struct otg_fsm *fsm, int on);
+	void	(*start_pulse)(struct otg_fsm *fsm);
+	void	(*start_adp_prb)(struct otg_fsm *fsm);
+	void	(*start_adp_sns)(struct otg_fsm *fsm);
+	void	(*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+	void	(*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
 	int	(*start_host)(struct otg_fsm *fsm, int on);
 	int	(*start_gadget)(struct otg_fsm *fsm, int on);
 };
 
 
-static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on)
+static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on)
 {
-	fsm->ops->chrg_vbus(on);
+	if (!fsm->ops->chrg_vbus)
+		return -EOPNOTSUPP;
+	fsm->ops->chrg_vbus(fsm, on);
+	return 0;
 }
 
-static inline void otg_drv_vbus(struct otg_fsm *fsm, int on)
+static inline int otg_drv_vbus(struct otg_fsm *fsm, int on)
 {
+	if (!fsm->ops->drv_vbus)
+		return -EOPNOTSUPP;
 	if (fsm->drv_vbus != on) {
 		fsm->drv_vbus = on;
-		fsm->ops->drv_vbus(on);
+		fsm->ops->drv_vbus(fsm, on);
 	}
+	return 0;
 }
 
-static inline void otg_loc_conn(struct otg_fsm *fsm, int on)
+static inline int otg_loc_conn(struct otg_fsm *fsm, int on)
 {
+	if (!fsm->ops->loc_conn)
+		return -EOPNOTSUPP;
 	if (fsm->loc_conn != on) {
 		fsm->loc_conn = on;
-		fsm->ops->loc_conn(on);
+		fsm->ops->loc_conn(fsm, on);
 	}
+	return 0;
 }
 
-static inline void otg_loc_sof(struct otg_fsm *fsm, int on)
+static inline int otg_loc_sof(struct otg_fsm *fsm, int on)
 {
+	if (!fsm->ops->loc_sof)
+		return -EOPNOTSUPP;
 	if (fsm->loc_sof != on) {
 		fsm->loc_sof = on;
-		fsm->ops->loc_sof(on);
+		fsm->ops->loc_sof(fsm, on);
 	}
+	return 0;
 }
 
-static inline void otg_start_pulse(struct otg_fsm *fsm)
+static inline int otg_start_pulse(struct otg_fsm *fsm)
 {
-	fsm->ops->start_pulse();
+	if (!fsm->ops->start_pulse)
+		return -EOPNOTSUPP;
+	if (!fsm->data_pulse) {
+		fsm->data_pulse = 1;
+		fsm->ops->start_pulse(fsm);
+	}
+	return 0;
 }
 
-static inline void otg_add_timer(struct otg_fsm *fsm, void *timer)
+static inline int otg_start_adp_prb(struct otg_fsm *fsm)
 {
-	fsm->ops->add_timer(timer);
+	if (!fsm->ops->start_adp_prb)
+		return -EOPNOTSUPP;
+	if (!fsm->adp_prb) {
+		fsm->adp_sns = 0;
+		fsm->adp_prb = 1;
+		fsm->ops->start_adp_prb(fsm);
+	}
+	return 0;
 }
 
-static inline void otg_del_timer(struct otg_fsm *fsm, void *timer)
+static inline int otg_start_adp_sns(struct otg_fsm *fsm)
 {
-	fsm->ops->del_timer(timer);
+	if (!fsm->ops->start_adp_sns)
+		return -EOPNOTSUPP;
+	if (!fsm->adp_sns) {
+		fsm->adp_sns = 1;
+		fsm->ops->start_adp_sns(fsm);
+	}
+	return 0;
+}
+
+static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+	if (!fsm->ops->add_timer)
+		return -EOPNOTSUPP;
+	fsm->ops->add_timer(fsm, timer);
+	return 0;
+}
+
+static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+	if (!fsm->ops->del_timer)
+		return -EOPNOTSUPP;
+	fsm->ops->del_timer(fsm, timer);
+	return 0;
+}
+
+static inline int otg_start_host(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->start_host)
+		return -EOPNOTSUPP;
+	return fsm->ops->start_host(fsm, on);
+}
+
+static inline int otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->start_gadget)
+		return -EOPNOTSUPP;
+	return fsm->ops->start_gadget(fsm, on);
 }
 
 int otg_statemachine(struct otg_fsm *fsm);
-
-/* Defined by device specific driver, for different timer implementation */
-extern struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
-	*a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr,
-	*a_wait_enum_tmr;
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index efe59f3..fce3a9e 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -35,6 +35,9 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include "phy-generic.h"
 
@@ -64,6 +67,23 @@
 	return 0;
 }
 
+static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted)
+{
+	int value;
+
+	if (!gpio_is_valid(nop->gpio_reset))
+		return;
+
+	value = asserted;
+	if (nop->reset_active_low)
+		value = !value;
+
+	gpio_set_value_cansleep(nop->gpio_reset, value);
+
+	if (!asserted)
+		usleep_range(10000, 20000);
+}
+
 int usb_gen_phy_init(struct usb_phy *phy)
 {
 	struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
@@ -74,13 +94,10 @@
 	}
 
 	if (!IS_ERR(nop->clk))
-		clk_enable(nop->clk);
+		clk_prepare_enable(nop->clk);
 
-	if (!IS_ERR(nop->reset)) {
-		/* De-assert RESET */
-		if (regulator_enable(nop->reset))
-			dev_err(phy->dev, "Failed to de-assert reset\n");
-	}
+	/* De-assert RESET */
+	nop_reset_set(nop, 0);
 
 	return 0;
 }
@@ -90,14 +107,11 @@
 {
 	struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
 
-	if (!IS_ERR(nop->reset)) {
-		/* Assert RESET */
-		if (regulator_disable(nop->reset))
-			dev_err(phy->dev, "Failed to assert reset\n");
-	}
+	/* Assert RESET */
+	nop_reset_set(nop, 1);
 
 	if (!IS_ERR(nop->clk))
-		clk_disable(nop->clk);
+		clk_disable_unprepare(nop->clk);
 
 	if (!IS_ERR(nop->vcc)) {
 		if (regulator_disable(nop->vcc))
@@ -136,8 +150,7 @@
 }
 
 int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
-		enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
-		bool needs_reset)
+		enum usb_phy_type type, u32 clk_rate, bool needs_vcc)
 {
 	int err;
 
@@ -160,14 +173,6 @@
 		}
 	}
 
-	if (!IS_ERR(nop->clk)) {
-		err = clk_prepare(nop->clk);
-		if (err) {
-			dev_err(dev, "Error preparing clock\n");
-			return err;
-		}
-	}
-
 	nop->vcc = devm_regulator_get(dev, "vcc");
 	if (IS_ERR(nop->vcc)) {
 		dev_dbg(dev, "Error getting vcc regulator: %ld\n",
@@ -176,12 +181,22 @@
 			return -EPROBE_DEFER;
 	}
 
-	nop->reset = devm_regulator_get(dev, "reset");
-	if (IS_ERR(nop->reset)) {
-		dev_dbg(dev, "Error getting reset regulator: %ld\n",
-					PTR_ERR(nop->reset));
-		if (needs_reset)
-			return -EPROBE_DEFER;
+	if (gpio_is_valid(nop->gpio_reset)) {
+		unsigned long gpio_flags;
+
+		/* Assert RESET */
+		if (nop->reset_active_low)
+			gpio_flags = GPIOF_OUT_INIT_LOW;
+		else
+			gpio_flags = GPIOF_OUT_INIT_HIGH;
+
+		err = devm_gpio_request_one(dev, nop->gpio_reset,
+						gpio_flags, dev_name(dev));
+		if (err) {
+			dev_err(dev, "Error requesting RESET GPIO %d\n",
+					nop->gpio_reset);
+			return err;
+		}
 	}
 
 	nop->dev		= dev;
@@ -200,13 +215,6 @@
 }
 EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
 
-void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop)
-{
-	if (!IS_ERR(nop->clk))
-		clk_unprepare(nop->clk);
-}
-EXPORT_SYMBOL_GPL(usb_phy_gen_cleanup_phy);
-
 static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -217,31 +225,36 @@
 	int err;
 	u32 clk_rate = 0;
 	bool needs_vcc = false;
-	bool needs_reset = false;
-
-	if (dev->of_node) {
-		struct device_node *node = dev->of_node;
-
-		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
-			clk_rate = 0;
-
-		needs_vcc = of_property_read_bool(node, "vcc-supply");
-		needs_reset = of_property_read_bool(node, "reset-supply");
-
-	} else if (pdata) {
-		type = pdata->type;
-		clk_rate = pdata->clk_rate;
-		needs_vcc = pdata->needs_vcc;
-		needs_reset = pdata->needs_reset;
-	}
 
 	nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
 	if (!nop)
 		return -ENOMEM;
 
+	nop->reset_active_low = true;	/* default behaviour */
 
-	err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc,
-			needs_reset);
+	if (dev->of_node) {
+		struct device_node *node = dev->of_node;
+		enum of_gpio_flags flags;
+
+		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
+			clk_rate = 0;
+
+		needs_vcc = of_property_read_bool(node, "vcc-supply");
+		nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
+								0, &flags);
+		if (nop->gpio_reset == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+	} else if (pdata) {
+		type = pdata->type;
+		clk_rate = pdata->clk_rate;
+		needs_vcc = pdata->needs_vcc;
+		nop->gpio_reset = pdata->gpio_reset;
+	}
+
+	err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc);
 	if (err)
 		return err;
 
@@ -252,15 +265,13 @@
 	if (err) {
 		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
 			err);
-		goto err_add;
+		return err;
 	}
 
 	platform_set_drvdata(pdev, nop);
 
 	return 0;
 
-err_add:
-	usb_phy_gen_cleanup_phy(nop);
 	return err;
 }
 
@@ -268,7 +279,6 @@
 {
 	struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev);
 
-	usb_phy_gen_cleanup_phy(nop);
 	usb_remove_phy(&nop->phy);
 
 	return 0;
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index 61687d5..d2a220d 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -6,15 +6,14 @@
 	struct device *dev;
 	struct clk *clk;
 	struct regulator *vcc;
-	struct regulator *reset;
+	int gpio_reset;
+	bool reset_active_low;
 };
 
 int usb_gen_phy_init(struct usb_phy *phy);
 void usb_gen_phy_shutdown(struct usb_phy *phy);
 
 int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
-		enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
-		bool needs_reset);
-void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop);
+		enum usb_phy_type type, u32 clk_rate, bool needs_vcc);
 
 #endif
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index a4dda8e..09c5ace 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -20,69 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/usb/omap_control_usb.h>
 
-static struct omap_control_usb *control_usb;
-
-/**
- * omap_get_control_dev - returns the device pointer for this control device
- *
- * This API should be called to get the device pointer for this control
- * module device. This device pointer should be used for called other
- * exported API's in this driver.
- *
- * To be used by PHY driver and glue driver.
- */
-struct device *omap_get_control_dev(void)
-{
-	if (!control_usb)
-		return ERR_PTR(-ENODEV);
-
-	return control_usb->dev;
-}
-EXPORT_SYMBOL_GPL(omap_get_control_dev);
-
-/**
- * omap_control_usb3_phy_power - power on/off the serializer using control
- *	module
- * @dev: the control module device
- * @on: 0 to off and 1 to on based on powering on or off the PHY
- *
- * usb3 PHY driver should call this API to power on or off the PHY.
- */
-void omap_control_usb3_phy_power(struct device *dev, bool on)
-{
-	u32 val;
-	unsigned long rate;
-	struct omap_control_usb	*control_usb = dev_get_drvdata(dev);
-
-	if (control_usb->type != OMAP_CTRL_DEV_TYPE2)
-		return;
-
-	rate = clk_get_rate(control_usb->sys_clk);
-	rate = rate/1000000;
-
-	val = readl(control_usb->phy_power);
-
-	if (on) {
-		val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
-			OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
-		val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
-			OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
-		val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
-	} else {
-		val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
-		val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
-			OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
-	}
-
-	writel(val, control_usb->phy_power);
-}
-EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power);
-
 /**
  * omap_control_usb_phy_power - power on/off the phy using control module reg
  * @dev: the control module device
@@ -91,16 +34,63 @@
 void omap_control_usb_phy_power(struct device *dev, int on)
 {
 	u32 val;
-	struct omap_control_usb	*control_usb = dev_get_drvdata(dev);
+	unsigned long rate;
+	struct omap_control_usb	*control_usb;
 
-	val = readl(control_usb->dev_conf);
+	if (IS_ERR(dev) || !dev) {
+		pr_err("%s: invalid device\n", __func__);
+		return;
+	}
 
-	if (on)
-		val &= ~OMAP_CTRL_DEV_PHY_PD;
-	else
-		val |= OMAP_CTRL_DEV_PHY_PD;
+	control_usb = dev_get_drvdata(dev);
+	if (!control_usb) {
+		dev_err(dev, "%s: invalid control usb device\n", __func__);
+		return;
+	}
 
-	writel(val, control_usb->dev_conf);
+	if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
+		return;
+
+	val = readl(control_usb->power);
+
+	switch (control_usb->type) {
+	case OMAP_CTRL_TYPE_USB2:
+		if (on)
+			val &= ~OMAP_CTRL_DEV_PHY_PD;
+		else
+			val |= OMAP_CTRL_DEV_PHY_PD;
+		break;
+
+	case OMAP_CTRL_TYPE_PIPE3:
+		rate = clk_get_rate(control_usb->sys_clk);
+		rate = rate/1000000;
+
+		if (on) {
+			val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
+					OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
+			val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
+				OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+			val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
+		} else {
+			val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
+			val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
+				OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+		}
+		break;
+
+	case OMAP_CTRL_TYPE_DRA7USB2:
+		if (on)
+			val &= ~OMAP_CTRL_USB2_PHY_PD;
+		else
+			val |= OMAP_CTRL_USB2_PHY_PD;
+		break;
+	default:
+		dev_err(dev, "%s: type %d not recognized\n",
+					__func__, control_usb->type);
+		break;
+	}
+
+	writel(val, control_usb->power);
 }
 EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
 
@@ -172,11 +162,19 @@
 {
 	struct omap_control_usb	*ctrl_usb;
 
-	if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1)
+	if (IS_ERR(dev) || !dev)
 		return;
 
 	ctrl_usb = dev_get_drvdata(dev);
 
+	if (!ctrl_usb) {
+		dev_err(dev, "Invalid control usb device\n");
+		return;
+	}
+
+	if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
+		return;
+
 	switch (mode) {
 	case USB_MODE_HOST:
 		omap_control_usb_host_mode(ctrl_usb);
@@ -193,12 +191,46 @@
 }
 EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
 
+#ifdef CONFIG_OF
+
+static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
+static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
+static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+
+static const struct of_device_id omap_control_usb_id_table[] = {
+	{
+		.compatible = "ti,control-phy-otghs",
+		.data = &otghs_data,
+	},
+	{
+		.compatible = "ti,control-phy-usb2",
+		.data = &usb2_data,
+	},
+	{
+		.compatible = "ti,control-phy-pipe3",
+		.data = &pipe3_data,
+	},
+	{
+		.compatible = "ti,control-phy-dra7usb2",
+		.data = &dra7usb2_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+#endif
+
+
 static int omap_control_usb_probe(struct platform_device *pdev)
 {
 	struct resource	*res;
-	struct device_node *np = pdev->dev.of_node;
-	struct omap_control_usb_platform_data *pdata =
-			dev_get_platdata(&pdev->dev);
+	const struct of_device_id *of_id;
+	struct omap_control_usb *control_usb;
+
+	of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
+								&pdev->dev);
+	if (!of_id)
+		return -EINVAL;
 
 	control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
 		GFP_KERNEL);
@@ -207,40 +239,27 @@
 		return -ENOMEM;
 	}
 
-	if (np) {
-		of_property_read_u32(np, "ti,type", &control_usb->type);
-	} else if (pdata) {
-		control_usb->type = pdata->type;
-	} else {
-		dev_err(&pdev->dev, "no pdata present\n");
-		return -EINVAL;
-	}
+	control_usb->dev = &pdev->dev;
+	control_usb->type = *(enum omap_control_usb_type *)of_id->data;
 
-	control_usb->dev	= &pdev->dev;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-		"control_dev_conf");
-	control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(control_usb->dev_conf))
-		return PTR_ERR(control_usb->dev_conf);
-
-	if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
+	if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 			"otghs_control");
 		control_usb->otghs_control = devm_ioremap_resource(
 			&pdev->dev, res);
 		if (IS_ERR(control_usb->otghs_control))
 			return PTR_ERR(control_usb->otghs_control);
+	} else {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+				"power");
+		control_usb->power = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(control_usb->power)) {
+			dev_err(&pdev->dev, "Couldn't get power register\n");
+			return PTR_ERR(control_usb->power);
+		}
 	}
 
-	if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-			"phy_power_usb");
-		control_usb->phy_power = devm_ioremap_resource(
-			&pdev->dev, res);
-		if (IS_ERR(control_usb->phy_power))
-			return PTR_ERR(control_usb->phy_power);
-
+	if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
 		control_usb->sys_clk = devm_clk_get(control_usb->dev,
 			"sys_clkin");
 		if (IS_ERR(control_usb->sys_clk)) {
@@ -249,20 +268,11 @@
 		}
 	}
 
-
 	dev_set_drvdata(control_usb->dev, control_usb);
 
 	return 0;
 }
 
-#ifdef CONFIG_OF
-static const struct of_device_id omap_control_usb_id_table[] = {
-	{ .compatible = "ti,omap-control-usb" },
-	{}
-};
-MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
-#endif
-
 static struct platform_driver omap_control_usb_driver = {
 	.probe		= omap_control_usb_probe,
 	.driver		= {
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index 4e8a040..0c6ba29 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -26,6 +26,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
 #include <linux/usb/omap_control_usb.h>
+#include <linux/of_platform.h>
 
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
@@ -100,7 +101,7 @@
 			udelay(1);
 		} while (--timeout);
 
-		omap_control_usb3_phy_power(phy->control_dev, 0);
+		omap_control_usb_phy_power(phy->control_dev, 0);
 
 		phy->is_suspended	= 1;
 	} else if (!suspend && phy->is_suspended) {
@@ -189,15 +190,21 @@
 	if (ret)
 		return ret;
 
-	omap_control_usb3_phy_power(phy->control_dev, 1);
+	omap_control_usb_phy_power(phy->control_dev, 1);
 
 	return 0;
 }
 
 static int omap_usb3_probe(struct platform_device *pdev)
 {
-	struct omap_usb			*phy;
-	struct resource			*res;
+	struct omap_usb *phy;
+	struct resource *res;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *control_node;
+	struct platform_device *control_pdev;
+
+	if (!node)
+		return -EINVAL;
 
 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy) {
@@ -239,13 +246,20 @@
 		return -EINVAL;
 	}
 
-	phy->control_dev = omap_get_control_dev();
-	if (IS_ERR(phy->control_dev)) {
-		dev_dbg(&pdev->dev, "Failed to get control device\n");
-		return -ENODEV;
+	control_node = of_parse_phandle(node, "ctrl-module", 0);
+	if (!control_node) {
+		dev_err(&pdev->dev, "Failed to get control device phandle\n");
+		return -EINVAL;
+	}
+	control_pdev = of_find_device_by_node(control_node);
+	if (!control_pdev) {
+		dev_err(&pdev->dev, "Failed to get control device\n");
+		return -EINVAL;
 	}
 
-	omap_control_usb3_phy_power(phy->control_dev, 0);
+	phy->control_dev = &control_pdev->dev;
+
+	omap_control_usb_phy_power(phy->control_dev, 0);
 	usb_add_phy_dev(&phy->phy);
 
 	platform_set_drvdata(pdev, phy);
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
new file mode 100644
index 0000000..a99a695
--- /dev/null
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -0,0 +1,248 @@
+/*
+ * Renesas R-Car Gen2 USB phy driver
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/usb/otg.h>
+
+struct rcar_gen2_usb_phy_priv {
+	struct usb_phy phy;
+	void __iomem *base;
+	struct clk *clk;
+	spinlock_t lock;
+	int usecount;
+	u32 ugctrl2;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy)
+
+/* Low Power Status register */
+#define USBHS_LPSTS_REG			0x02
+#define USBHS_LPSTS_SUSPM		(1 << 14)
+
+/* USB General control register */
+#define USBHS_UGCTRL_REG		0x80
+#define USBHS_UGCTRL_CONNECT		(1 << 2)
+#define USBHS_UGCTRL_PLLRESET		(1 << 0)
+
+/* USB General control register 2 */
+#define USBHS_UGCTRL2_REG		0x84
+#define USBHS_UGCTRL2_USB0_PCI		(1 << 4)
+#define USBHS_UGCTRL2_USB0_HS		(3 << 4)
+#define USBHS_UGCTRL2_USB2_PCI		(0 << 31)
+#define USBHS_UGCTRL2_USB2_SS		(1 << 31)
+
+/* USB General status register */
+#define USBHS_UGSTS_REG			0x88
+#define USBHS_UGSTS_LOCK		(3 << 8)
+
+/* Enable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
+{
+	u32 val;
+	int i;
+
+	/* USBHS PHY power on */
+	val = ioread32(base + USBHS_UGCTRL_REG);
+	val &= ~USBHS_UGCTRL_PLLRESET;
+	iowrite32(val, base + USBHS_UGCTRL_REG);
+
+	val = ioread16(base + USBHS_LPSTS_REG);
+	val |= USBHS_LPSTS_SUSPM;
+	iowrite16(val, base + USBHS_LPSTS_REG);
+
+	for (i = 0; i < 20; i++) {
+		val = ioread32(base + USBHS_UGSTS_REG);
+		if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
+			val = ioread32(base + USBHS_UGCTRL_REG);
+			val |= USBHS_UGCTRL_CONNECT;
+			iowrite32(val, base + USBHS_UGCTRL_REG);
+			return 0;
+		}
+		udelay(1);
+	}
+
+	/* Timed out waiting for the PLL lock */
+	return -ETIMEDOUT;
+}
+
+/* Disable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_disable(void __iomem *base)
+{
+	u32 val;
+
+	/* USBHS PHY power off */
+	val = ioread32(base + USBHS_UGCTRL_REG);
+	val &= ~USBHS_UGCTRL_CONNECT;
+	iowrite32(val, base + USBHS_UGCTRL_REG);
+
+	val = ioread16(base + USBHS_LPSTS_REG);
+	val &= ~USBHS_LPSTS_SUSPM;
+	iowrite16(val, base + USBHS_LPSTS_REG);
+
+	val = ioread32(base + USBHS_UGCTRL_REG);
+	val |= USBHS_UGCTRL_PLLRESET;
+	iowrite32(val, base + USBHS_UGCTRL_REG);
+	return 0;
+}
+
+/* Setup USB channels */
+static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
+{
+	u32 val;
+
+	clk_prepare_enable(priv->clk);
+
+	/* Set USB channels in the USBHS UGCTRL2 register */
+	val = ioread32(priv->base);
+	val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
+	val |= priv->ugctrl2;
+	iowrite32(val, priv->base);
+}
+
+/* Shutdown USB channels */
+static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv)
+{
+	__rcar_gen2_usbhs_phy_disable(priv->base);
+	clk_disable_unprepare(priv->clk);
+}
+
+static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend)
+{
+	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) :
+			   __rcar_gen2_usbhs_phy_enable(priv->base);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return retval;
+}
+
+static int rcar_gen2_usb_phy_init(struct usb_phy *phy)
+{
+	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/*
+	 * Enable the clock and setup USB channels
+	 * if it's the first user
+	 */
+	if (!priv->usecount++)
+		__rcar_gen2_usb_phy_init(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return 0;
+}
+
+static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy)
+{
+	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!priv->usecount) {
+		dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n");
+		goto out;
+	}
+
+	/* Disable everything if it's the last user */
+	if (!--priv->usecount)
+		__rcar_gen2_usb_phy_shutdown(priv);
+out:
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rcar_gen2_phy_platform_data *pdata;
+	struct rcar_gen2_usb_phy_priv *priv;
+	struct resource *res;
+	void __iomem *base;
+	struct clk *clk;
+	int retval;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(dev, "No platform data\n");
+		return -EINVAL;
+	}
+
+	clk = devm_clk_get(&pdev->dev, "usbhs");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Can't get the clock\n");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&priv->lock);
+	priv->clk = clk;
+	priv->base = base;
+	priv->ugctrl2 = pdata->chan0_pci ?
+			USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS;
+	priv->ugctrl2 |= pdata->chan2_pci ?
+			USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS;
+	priv->phy.dev = dev;
+	priv->phy.label = dev_name(dev);
+	priv->phy.init = rcar_gen2_usb_phy_init;
+	priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
+	priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
+
+	retval = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+	if (retval < 0) {
+		dev_err(dev, "Failed to add USB phy\n");
+		return retval;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return retval;
+}
+
+static int rcar_gen2_usb_phy_remove(struct platform_device *pdev)
+{
+	struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&priv->phy);
+
+	return 0;
+}
+
+static struct platform_driver rcar_gen2_usb_phy_driver = {
+	.driver = {
+		.name = "usb_phy_rcar_gen2",
+	},
+	.probe = rcar_gen2_usb_phy_probe,
+	.remove = rcar_gen2_usb_phy_remove,
+};
+
+module_platform_driver(rcar_gen2_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy");
+MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index ff70e4b..b3ba866 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -411,6 +411,7 @@
 	sphy->drv_data		= drv_data;
 	sphy->phy.dev		= sphy->dev;
 	sphy->phy.label		= "samsung-usb2phy";
+	sphy->phy.type		= USB_PHY_TYPE_USB2;
 	sphy->phy.init		= samsung_usb2phy_init;
 	sphy->phy.shutdown	= samsung_usb2phy_shutdown;
 
@@ -426,7 +427,7 @@
 
 	platform_set_drvdata(pdev, sphy);
 
-	return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
+	return usb_add_phy_dev(&sphy->phy);
 }
 
 static int samsung_usb2phy_remove(struct platform_device *pdev)
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index c6eb222..cc08192 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -271,6 +271,7 @@
 	sphy->clk		= clk;
 	sphy->phy.dev		= sphy->dev;
 	sphy->phy.label		= "samsung-usb3phy";
+	sphy->phy.type		= USB_PHY_TYPE_USB3;
 	sphy->phy.init		= samsung_usb3phy_init;
 	sphy->phy.shutdown	= samsung_usb3phy_shutdown;
 	sphy->drv_data		= samsung_usbphy_get_driver_data(pdev);
@@ -283,7 +284,7 @@
 
 	platform_set_drvdata(pdev, sphy);
 
-	return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3);
+	return usb_add_phy_dev(&sphy->phy);
 }
 
 static int samsung_usb3phy_remove(struct platform_device *pdev)
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index e9cb1cb..82232ac 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -1090,7 +1090,7 @@
 	.driver		= {
 		.name	= "tegra-phy",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(tegra_usb_phy_id_table),
+		.of_match_table = tegra_usb_phy_id_table,
 	},
 };
 module_platform_driver(tegra_usb_phy_driver);
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 16dbc93..30e8a61 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 
 /* usb register definitions */
 #define USB_VENDOR_ID_LSB		0x00
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index 7c22a539..18bb826 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -36,7 +36,7 @@
 			return 0;
 
 		udelay(1);
-	};
+	}
 
 	return -ETIMEDOUT;
 }
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index a9984c7..1b74523 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -98,7 +98,7 @@
 
 	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
 	if (!ptr)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	phy = usb_get_phy(type);
 	if (!IS_ERR(phy)) {
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 7814262..6e1b69d 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -279,7 +279,7 @@
 
 		old_rdtodo = priv->rdtodo;
 
-		if (old_rdtodo + size < old_rdtodo) {
+		if (old_rdtodo > SHRT_MAX - size) {
 			dev_dbg(dev, "To many bulk_in urbs to do.\n");
 			spin_unlock(&priv->lock);
 			goto resubmit;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c45f9c0..9ced893 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -904,6 +904,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	/* Crucible Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
 	{ }					/* Terminating entry */
 };
 
@@ -1966,8 +1967,16 @@
 			port->icount.dsr++;
 		if (diff_status & FTDI_RS0_RI)
 			port->icount.rng++;
-		if (diff_status & FTDI_RS0_RLSD)
+		if (diff_status & FTDI_RS0_RLSD) {
+			struct tty_struct *tty;
+
 			port->icount.dcd++;
+			tty = tty_port_tty_get(&port->port);
+			if (tty)
+				usb_serial_handle_dcd_change(port, tty,
+						status & FTDI_RS0_RLSD);
+			tty_kref_put(tty);
+		}
 
 		wake_up_interruptible(&port->port.delta_msr_wait);
 		priv->prev_status = status;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1b8af46..a7019d1 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1307,3 +1307,9 @@
  * Manufacturer: Crucible Technologies
  */
 #define FTDI_CT_COMET_PID	0x8e08
+
+/*
+ * Product: Z3X Box
+ * Manufacturer: Smart GSM Team
+ */
+#define FTDI_Z3X_PID		0x0011
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 1f31e6b..2b01ec8 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -7,7 +7,6 @@
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
@@ -37,7 +36,6 @@
 
 static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 
-/* All of the device info needed for the Generic Serial Converter */
 struct usb_serial_driver usb_serial_generic_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -66,7 +64,6 @@
 	generic_device_ids[0].match_flags =
 		USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
 
-	/* register our generic driver with ourselves */
 	retval = usb_serial_register_drivers(serial_drivers,
 			"usbserial_generic", generic_device_ids);
 #endif
@@ -76,7 +73,6 @@
 void usb_serial_generic_deregister(void)
 {
 #ifdef CONFIG_USB_SERIAL_GENERIC
-	/* remove our generic driver */
 	usb_serial_deregister_drivers(serial_drivers);
 #endif
 }
@@ -86,13 +82,11 @@
 	int result = 0;
 	unsigned long flags;
 
-	/* clear the throttle flags */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = 0;
 	port->throttle_req = 0;
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	/* if we have a bulk endpoint, start reading from it */
 	if (port->bulk_in_size)
 		result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
 
@@ -127,12 +121,16 @@
 }
 
 /**
- * usb_serial_generic_write_start - kick off an URB write
- * @port:	Pointer to the &struct usb_serial_port data
+ * usb_serial_generic_write_start - start writing buffered data
+ * @port: usb-serial port
+ * @mem_flags: flags to use for memory allocations
  *
- * Returns zero on success, or a negative errno value
+ * Serialised using USB_SERIAL_WRITE_BUSY flag.
+ *
+ * Return: Zero on success or if busy, otherwise a negative errno value.
  */
-static int usb_serial_generic_write_start(struct usb_serial_port *port)
+int usb_serial_generic_write_start(struct usb_serial_port *port,
+							gfp_t mem_flags)
 {
 	struct urb *urb;
 	int count, result;
@@ -163,7 +161,7 @@
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	clear_bit(i, &port->write_urbs_free);
-	result = usb_submit_urb(urb, GFP_ATOMIC);
+	result = usb_submit_urb(urb, mem_flags);
 	if (result) {
 		dev_err_console(port, "%s - error submitting urb: %d\n",
 						__func__, result);
@@ -175,34 +173,34 @@
 		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
 		return result;
 	}
-
-	/* Try sending off another urb, unless in irq context (in which case
-	 * there will be no free urb). */
-	if (!in_irq())
+	/*
+	 * Try sending off another urb, unless called from completion handler
+	 * (in which case there will be no free urb or no data).
+	 */
+	if (mem_flags != GFP_ATOMIC)
 		goto retry;
 
 	clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_write_start);
 
 /**
- * usb_serial_generic_write - generic write function for serial USB devices
- * @tty:	Pointer to &struct tty_struct for the device
- * @port:	Pointer to the &usb_serial_port structure for the device
- * @buf:	Pointer to the data to write
- * @count:	Number of bytes to write
+ * usb_serial_generic_write - generic write function
+ * @tty: tty for the port
+ * @port: usb-serial port
+ * @buf: data to write
+ * @count: number of bytes to write
  *
- * Returns the number of characters actually written, which may be anything
- * from zero to @count. If an error occurs, it returns the negative errno
- * value.
+ * Return: The number of characters buffered, which may be anything from
+ * zero to @count, or a negative errno value.
  */
 int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	int result;
 
-	/* only do something if we have a bulk out endpoint */
 	if (!port->bulk_out_size)
 		return -ENODEV;
 
@@ -210,7 +208,7 @@
 		return 0;
 
 	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
-	result = usb_serial_generic_write_start(port);
+	result = usb_serial_generic_write_start(port, GFP_KERNEL);
 	if (result)
 		return result;
 
@@ -337,10 +335,11 @@
 
 	if (!urb->actual_length)
 		return;
-
-	/* The per character mucking around with sysrq path it too slow for
-	   stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases
-	   where the USB serial is not a console anyway */
+	/*
+	 * The per character mucking around with sysrq path it too slow for
+	 * stuff like 3G modems, so shortcircuit it in the 99.9999999% of
+	 * cases where the USB serial is not a console anyway.
+	 */
 	if (!port->port.console || !port->sysrq)
 		tty_insert_flip_string(&port->port, ch, urb->actual_length);
 	else {
@@ -413,7 +412,7 @@
 		kfifo_reset_out(&port->write_fifo);
 		spin_unlock_irqrestore(&port->lock, flags);
 	} else {
-		usb_serial_generic_write_start(port);
+		usb_serial_generic_write_start(port, GFP_ATOMIC);
 	}
 
 	usb_serial_port_softint(port);
@@ -425,8 +424,6 @@
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 
-	/* Set the throttle request flag. It will be picked up
-	 * by usb_serial_generic_read_bulk_callback(). */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttle_req = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -438,7 +435,6 @@
 	struct usb_serial_port *port = tty->driver_data;
 	int was_throttled;
 
-	/* Clear the throttle flags */
 	spin_lock_irq(&port->lock);
 	was_throttled = port->throttled;
 	port->throttled = port->throttle_req = 0;
@@ -558,10 +554,10 @@
 EXPORT_SYMBOL_GPL(usb_serial_handle_break);
 
 /**
- *	usb_serial_handle_dcd_change - handle a change of carrier detect state
- *	@port: usb_serial_port structure for the open port
- *	@tty: tty_struct structure for the port
- *	@status: new carrier detect status, nonzero if active
+ * usb_serial_handle_dcd_change - handle a change of carrier detect state
+ * @port: usb-serial port
+ * @tty: tty for the port
+ * @status: new carrier detect status, nonzero if active
  */
 void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
 				struct tty_struct *tty, unsigned int status)
@@ -570,6 +566,16 @@
 
 	dev_dbg(&usb_port->dev, "%s - status %d\n", __func__, status);
 
+	if (tty) {
+		struct tty_ldisc *ld = tty_ldisc_ref(tty);
+
+		if (ld) {
+			if (ld->ops->dcd_change)
+				ld->ops->dcd_change(tty, status);
+			tty_ldisc_deref(ld);
+		}
+	}
+
 	if (status)
 		wake_up_interruptible(&port->open_wait);
 	else if (tty && !C_CLOCAL(tty))
@@ -595,7 +601,7 @@
 		}
 
 		if (port->bulk_out_size) {
-			r = usb_serial_generic_write_start(port);
+			r = usb_serial_generic_write_start(port, GFP_NOIO);
 			if (r < 0)
 				c++;
 		}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index fdf9535..e5bdd98 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1532,7 +1532,11 @@
 		return -ENODEV;
 
 	status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
+	if (status != 1)
+		return -EIO;
 	status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
+	if (status != 1)
+		return -EIO;
 	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
 	    | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
 	    | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index acaee06..c3d9485 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1376,6 +1376,23 @@
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1545, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1546, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1547, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1565, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1566, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1567, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1589, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1590, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1591, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1592, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1594, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
 	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index bedf8e4..1e6de4c 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -4,11 +4,6 @@
  * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2003 IBM Corp.
  *
- * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
- *  - fixes, improvements and documentation for the baud rate encoding methods
- * Copyright (C) 2013 Reinhard Max <max@suse.de>
- *  - fixes and improvements for the divisor based baud rate encoding method
- *
  * Original driver for 2.2.x by anonymous
  *
  *	This program is free software; you can redistribute it and/or
@@ -134,18 +129,10 @@
 
 
 enum pl2303_type {
-	type_0,		/* H version ? */
-	type_1,		/* H version ? */
-	HX_TA,		/* HX(A) / X(A) / TA version  */ /* TODO: improve */
-	HXD_EA_RA_SA,	/* HXD / EA / RA / SA version */ /* TODO: improve */
-	TB,		/* TB version */
-	HX_CLONE,	/* Cheap and less functional clone of the HX chip */
+	type_0,		/* don't know the difference between type 0 and */
+	type_1,		/* type 1, until someone from prolific tells us... */
+	HX,		/* HX version of the pl2303 chip */
 };
-/*
- * NOTE: don't know the difference between type 0 and type 1,
- * until someone from Prolific tells us...
- * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants
- */
 
 struct pl2303_serial_private {
 	enum pl2303_type type;
@@ -185,7 +172,6 @@
 {
 	struct pl2303_serial_private *spriv;
 	enum pl2303_type type = type_0;
-	char *type_str = "unknown (treating as type_0)";
 	unsigned char *buf;
 
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
@@ -198,53 +184,15 @@
 		return -ENOMEM;
 	}
 
-	if (serial->dev->descriptor.bDeviceClass == 0x02) {
+	if (serial->dev->descriptor.bDeviceClass == 0x02)
 		type = type_0;
-		type_str = "type_0";
-	} else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) {
-		/*
-		 * NOTE: The bcdDevice version is the only difference between
-		 * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
-		 */
-		if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
-			/* Check if the device is a clone */
-			pl2303_vendor_read(0x9494, 0, serial, buf);
-			/*
-			 * NOTE: Not sure if this read is really needed.
-			 * The HX returns 0x00, the clone 0x02, but the Windows
-			 * driver seems to ignore the value and continues.
-			 */
-			pl2303_vendor_write(0x0606, 0xaa, serial);
-			pl2303_vendor_read(0x8686, 0, serial, buf);
-			if (buf[0] != 0xaa) {
-				type = HX_CLONE;
-				type_str = "X/HX clone (limited functionality)";
-			} else {
-				type = HX_TA;
-				type_str = "X/HX/TA";
-			}
-			pl2303_vendor_write(0x0606, 0x00, serial);
-		} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
-								     == 0x400) {
-			type = HXD_EA_RA_SA;
-			type_str = "HXD/EA/RA/SA";
-		} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
-								     == 0x500) {
-			type = TB;
-			type_str = "TB";
-		} else {
-			dev_info(&serial->interface->dev,
-					   "unknown/unsupported device type\n");
-			kfree(spriv);
-			kfree(buf);
-			return -ENODEV;
-		}
-	} else if (serial->dev->descriptor.bDeviceClass == 0x00
-		   || serial->dev->descriptor.bDeviceClass == 0xFF) {
+	else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
+		type = HX;
+	else if (serial->dev->descriptor.bDeviceClass == 0x00)
 		type = type_1;
-		type_str = "type_1";
-	}
-	dev_dbg(&serial->interface->dev, "device type: %s\n", type_str);
+	else if (serial->dev->descriptor.bDeviceClass == 0xFF)
+		type = type_1;
+	dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
 	spriv->type = type;
 	usb_set_serial_data(serial, spriv);
@@ -259,10 +207,10 @@
 	pl2303_vendor_read(0x8383, 0, serial, buf);
 	pl2303_vendor_write(0, 1, serial);
 	pl2303_vendor_write(1, 0, serial);
-	if (type == type_0 || type == type_1)
-		pl2303_vendor_write(2, 0x24, serial);
-	else
+	if (type == HX)
 		pl2303_vendor_write(2, 0x44, serial);
+	else
+		pl2303_vendor_write(2, 0x24, serial);
 
 	kfree(buf);
 	return 0;
@@ -316,174 +264,65 @@
 	return retval;
 }
 
-static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
-								      u8 buf[4])
+static void pl2303_encode_baudrate(struct tty_struct *tty,
+					struct usb_serial_port *port,
+					u8 buf[4])
 {
-	/*
-	 * NOTE: Only the values defined in baud_sup are supported !
-	 * => if unsupported values are set, the PL2303 uses 9600 baud instead
-	 * => HX clones just don't work at unsupported baud rates < 115200 baud,
-	 *    for baud rates > 115200 they run at 115200 baud
-	 */
 	const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
-				 4800, 7200, 9600, 14400, 19200, 28800, 38400,
-				 57600, 115200, 230400, 460800, 614400, 921600,
-				 1228800, 2457600, 3000000, 6000000, 12000000 };
-	/*
-	 * NOTE: With the exception of type_0/1 devices, the following
-	 * additional baud rates are supported (tested with HX rev. 3A only):
-	 * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
-	 * 403200, 806400.	(*: not HX and HX clones)
-	 *
-	 * Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
-	 *                 type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
-	 *
-	 * As long as we are not using this encoding method for anything else
-	 * than the type_0+1, HX and HX clone chips, there is no point in
-	 * complicating the code to support them.
-	 */
+	                         4800, 7200, 9600, 14400, 19200, 28800, 38400,
+	                         57600, 115200, 230400, 460800, 500000, 614400,
+	                         921600, 1228800, 2457600, 3000000, 6000000 };
+
+	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	int baud;
 	int i;
 
+	/*
+	 * NOTE: Only the values defined in baud_sup are supported!
+	 *       => if unsupported values are set, the PL2303 seems to use
+	 *          9600 baud (at least my PL2303X always does)
+	 */
+	baud = tty_get_baud_rate(tty);
+	dev_dbg(&port->dev, "baud requested = %d\n", baud);
+	if (!baud)
+		return;
+
 	/* Set baudrate to nearest supported value */
 	for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
 		if (baud_sup[i] > baud)
 			break;
 	}
+
 	if (i == ARRAY_SIZE(baud_sup))
 		baud = baud_sup[i - 1];
 	else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
 		baud = baud_sup[i - 1];
 	else
 		baud = baud_sup[i];
-	/* Respect the chip type specific baud rate limits */
-	/*
-	 * FIXME: as long as we don't know how to distinguish between the
-	 * HXD, EA, RA, and SA chip variants, allow the max. value of 12M.
-	 */
-	if (type == HX_TA)
-		baud = min_t(int, baud, 6000000);
-	else if (type == type_0 || type == type_1)
+
+	/* type_0, type_1 only support up to 1228800 baud */
+	if (spriv->type != HX)
 		baud = min_t(int, baud, 1228800);
-	else if (type == HX_CLONE)
-		baud = min_t(int, baud, 115200);
-	/* Direct (standard) baud rate encoding method */
-	put_unaligned_le32(baud, buf);
 
-	return baud;
-}
-
-static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type,
-								      u8 buf[4])
-{
-	/*
-	 * Divisor based baud rate encoding method
-	 *
-	 * NOTE: HX clones do NOT support this method.
-	 * It's not clear if the type_0/1 chips support it.
-	 *
-	 * divisor = 12MHz * 32 / baudrate = 2^A * B
-	 *
-	 * with
-	 *
-	 * A = buf[1] & 0x0e
-	 * B = buf[0]  +  (buf[1] & 0x01) << 8
-	 *
-	 * Special cases:
-	 * => 8 < B < 16: device seems to work not properly
-	 * => B <= 8: device uses the max. value B = 512 instead
-	 */
-	unsigned int A, B;
-
-	/*
-	 * NOTE: The Windows driver allows maximum baud rates of 110% of the
-	 * specified maximium value.
-	 * Quick tests with early (2004) HX (rev. A) chips suggest, that even
-	 * higher baud rates (up to the maximum of 24M baud !) are working fine,
-	 * but that should really be tested carefully in "real life" scenarios
-	 * before removing the upper limit completely.
-	 * Baud rates smaller than the specified 75 baud are definitely working
-	 * fine.
-	 */
-	if (type == type_0 || type == type_1)
-		baud = min_t(int, baud, 1228800 * 1.1);
-	else if (type == HX_TA)
-		baud = min_t(int, baud, 6000000 * 1.1);
-	else if (type == HXD_EA_RA_SA)
-		/* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */
-		/*
-		 * FIXME: as long as we don't know how to distinguish between
-		 * these chip variants, allow the max. of these values
-		 */
-		baud = min_t(int, baud, 12000000 * 1.1);
-	else if (type == TB)
-		baud = min_t(int, baud, 12000000 * 1.1);
-	/* Determine factors A and B */
-	A = 0;
-	B = 12000000 * 32 / baud;  /* 12MHz */
-	B <<= 1; /* Add one bit for rounding */
-	while (B > (512 << 1) && A <= 14) {
-		A += 2;
-		B >>= 2;
-	}
-	if (A > 14) { /* max. divisor = min. baudrate reached */
-		A = 14;
-		B = 512;
-		/* => ~45.78 baud */
+	if (baud <= 115200) {
+		put_unaligned_le32(baud, buf);
 	} else {
-		B = (B + 1) >> 1; /* Round the last bit */
-	}
-	/* Handle special cases */
-	if (B == 512)
-		B = 0; /* also: 1 to 8 */
-	else if (B < 16)
 		/*
-		 * NOTE: With the current algorithm this happens
-		 * only for A=0 and means that the min. divisor
-		 * (respectively: the max. baudrate) is reached.
+		 * Apparently the formula for higher speeds is:
+		 * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
 		 */
-		B = 16;		/* => 24 MBaud */
-	/* Encode the baud rate */
-	buf[3] = 0x80;     /* Select divisor encoding method */
-	buf[2] = 0;
-	buf[1] = (A & 0x0e);		/* A */
-	buf[1] |= ((B & 0x100) >> 8);	/* MSB of B */
-	buf[0] = B & 0xff;		/* 8 LSBs of B */
-	/* Calculate the actual/resulting baud rate */
-	if (B <= 8)
-		B = 512;
-	baud = 12000000 * 32 / ((1 << A) * B);
+		unsigned tmp = 12000000 * 32 / baud;
+		buf[3] = 0x80;
+		buf[2] = 0;
+		buf[1] = (tmp >= 256);
+		while (tmp >= 256) {
+			tmp >>= 2;
+			buf[1] <<= 1;
+		}
+		buf[0] = tmp;
+	}
 
-	return baud;
-}
-
-static void pl2303_encode_baudrate(struct tty_struct *tty,
-					struct usb_serial_port *port,
-					enum pl2303_type type,
-					u8 buf[4])
-{
-	int baud;
-
-	baud = tty_get_baud_rate(tty);
-	dev_dbg(&port->dev, "baud requested = %d\n", baud);
-	if (!baud)
-		return;
-	/*
-	 * There are two methods for setting/encoding the baud rate
-	 * 1) Direct method: encodes the baud rate value directly
-	 *    => supported by all chip types
-	 * 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
-	 *    => not supported by HX clones (and likely type_0/1 chips)
-	 *
-	 * NOTE: Although the divisor based baud rate encoding method is much
-	 * more flexible, some of the standard baud rate values can not be
-	 * realized exactly. But the difference is very small (max. 0.2%) and
-	 * the device likely uses the same baud rate generator for both methods
-	 * so that there is likley no difference.
-	 */
-	if (type == type_0 || type == type_1 || type == HX_CLONE)
-		baud = pl2303_baudrate_encode_direct(baud, type, buf);
-	else
-		baud = pl2303_baudrate_encode_divisor(baud, type, buf);
 	/* Save resulting baud rate */
 	tty_encode_baud_rate(tty, baud, baud);
 	dev_dbg(&port->dev, "baud set = %d\n", baud);
@@ -540,8 +379,8 @@
 		dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 	}
 
-	/* For reference:   buf[0]:buf[3] baud rate value */
-	pl2303_encode_baudrate(tty, port, spriv->type, buf);
+	/* For reference buf[0]:buf[3] baud rate value */
+	pl2303_encode_baudrate(tty, port, &buf[0]);
 
 	/* For reference buf[4]=0 is 1 stop bits */
 	/* For reference buf[4]=1 is 1.5 stop bits */
@@ -618,10 +457,10 @@
 	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %7ph\n", i, buf);
 
 	if (C_CRTSCTS(tty)) {
-		if (spriv->type == type_0 || spriv->type == type_1)
-			pl2303_vendor_write(0x0, 0x41, serial);
-		else
+		if (spriv->type == HX)
 			pl2303_vendor_write(0x0, 0x61, serial);
+		else
+			pl2303_vendor_write(0x0, 0x41, serial);
 	} else {
 		pl2303_vendor_write(0x0, 0x0, serial);
 	}
@@ -658,7 +497,7 @@
 	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 	int result;
 
-	if (spriv->type == type_0 || spriv->type == type_1) {
+	if (spriv->type != HX) {
 		usb_clear_halt(serial->dev, port->write_urb->pipe);
 		usb_clear_halt(serial->dev, port->read_urb->pipe);
 	} else {
@@ -833,7 +672,6 @@
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 				 0, NULL, 0, 100);
-	/* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
 	if (result)
 		dev_err(&port->dev, "error sending break = %d\n", result);
 }
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index 7f78f30..f06ed82 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -208,9 +208,9 @@
 				ar_name = "ASSOCIATE";
 				ar_assoc = 1;
 				break;
-			};
+			}
 			break;
-		};
+		}
 
 		dev_dbg(dev, "Association request #%02u: 0x%04x/%04x "
 			 "(%zu bytes): %s\n",
@@ -623,6 +623,8 @@
 
 error_create_group:
 error_check:
+	usb_put_intf(iface);
+	usb_put_dev(cbaf->usb_dev);
 	kfree(cbaf->buffer);
 error_kmalloc_buffer:
 	kfree(cbaf);
@@ -637,6 +639,7 @@
 	sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group);
 	usb_set_intfdata(iface, NULL);
 	usb_put_intf(iface);
+	usb_put_dev(cbaf->usb_dev);
 	kfree(cbaf->buffer);
 	/* paranoia: clean up crypto keys */
 	kzfree(cbaf);
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 33a1278..e538b72 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -973,7 +973,7 @@
 	default:
 		WARN_ON(1);
 		result = NOTIFY_BAD;
-	};
+	}
 	return result;
 }
 
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
index a09b65e..368360f 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -33,7 +33,8 @@
  * wa->usb_dev and wa->usb_iface initialized and refcounted,
  * wa->wa_descr initialized.
  */
-int wa_create(struct wahc *wa, struct usb_interface *iface)
+int wa_create(struct wahc *wa, struct usb_interface *iface,
+	kernel_ulong_t quirks)
 {
 	int result;
 	struct device *dev = &iface->dev;
@@ -41,14 +42,15 @@
 	result = wa_rpipes_create(wa);
 	if (result < 0)
 		goto error_rpipes_create;
+	wa->quirks = quirks;
 	/* Fill up Data Transfer EP pointers */
 	wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc;
 	wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc;
-	wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd);
-	wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL);
-	if (wa->xfer_result == NULL) {
+	wa->dti_buf_size = usb_endpoint_maxp(wa->dti_epd);
+	wa->dti_buf = kmalloc(wa->dti_buf_size, GFP_KERNEL);
+	if (wa->dti_buf == NULL) {
 		result = -ENOMEM;
-		goto error_xfer_result_alloc;
+		goto error_dti_buf_alloc;
 	}
 	result = wa_nep_create(wa, iface);
 	if (result < 0) {
@@ -59,8 +61,8 @@
 	return 0;
 
 error_nep_create:
-	kfree(wa->xfer_result);
-error_xfer_result_alloc:
+	kfree(wa->dti_buf);
+error_dti_buf_alloc:
 	wa_rpipes_destroy(wa);
 error_rpipes_create:
 	return result;
@@ -76,7 +78,7 @@
 		usb_kill_urb(wa->buf_in_urb);
 		usb_put_urb(wa->buf_in_urb);
 	}
-	kfree(wa->xfer_result);
+	kfree(wa->dti_buf);
 	wa_nep_destroy(wa);
 	wa_rpipes_destroy(wa);
 }
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h
index cf250c2..e614f02 100644
--- a/drivers/usb/wusbcore/wa-hc.h
+++ b/drivers/usb/wusbcore/wa-hc.h
@@ -117,11 +117,25 @@
 	struct wahc *wa;
 	spinlock_t seg_lock;
 	struct list_head seg_list;
+	struct list_head list_node;
 	atomic_t segs_available;
 	u8 buffer[1];	/* For reads/writes on USB */
 };
 
 
+enum wa_dti_state {
+	WA_DTI_TRANSFER_RESULT_PENDING,
+	WA_DTI_ISOC_PACKET_STATUS_PENDING
+};
+
+enum wa_quirks {
+	/*
+	 * The Alereon HWA expects the data frames in isochronous transfer
+	 * requests to be concatenated and not sent as separate packets.
+	 */
+	WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC	= 0x01,
+};
+
 /**
  * Instance of a HWA Host Controller
  *
@@ -178,14 +192,26 @@
 
 	u16 rpipes;
 	unsigned long *rpipe_bm;	/* rpipe usage bitmap */
-	spinlock_t rpipe_bm_lock;	/* protect rpipe_bm */
+	struct list_head rpipe_delayed_list;	/* delayed RPIPES. */
+	spinlock_t rpipe_lock;	/* protect rpipe_bm and delayed list */
 	struct mutex rpipe_mutex;	/* assigning resources to endpoints */
 
+	/*
+	 * dti_state is used to track the state of the dti_urb.  When dti_state
+	 * is WA_DTI_ISOC_PACKET_STATUS_PENDING, dti_isoc_xfer_in_progress and
+	 * dti_isoc_xfer_seg identify which xfer the incoming isoc packet status
+	 * refers to.
+	 */
+	enum wa_dti_state dti_state;
+	u32 dti_isoc_xfer_in_progress;
+	u8  dti_isoc_xfer_seg;
 	struct urb *dti_urb;		/* URB for reading xfer results */
 	struct urb *buf_in_urb;		/* URB for reading data in */
 	struct edc dti_edc;		/* DTI error density counter */
-	struct wa_xfer_result *xfer_result; /* real size = dti_ep maxpktsize */
-	size_t xfer_result_size;
+	void *dti_buf;
+	size_t dti_buf_size;
+
+	unsigned long dto_in_use;	/* protect dto endoint serialization. */
 
 	s32 status;			/* For reading status */
 
@@ -200,10 +226,13 @@
 	struct work_struct xfer_enqueue_work;
 	struct work_struct xfer_error_work;
 	atomic_t xfer_id_count;
+
+	kernel_ulong_t	quirks;
 };
 
 
-extern int wa_create(struct wahc *wa, struct usb_interface *iface);
+extern int wa_create(struct wahc *wa, struct usb_interface *iface,
+	kernel_ulong_t);
 extern void __wa_destroy(struct wahc *wa);
 void wa_reset_all(struct wahc *wa);
 
@@ -239,7 +268,8 @@
 /* RPipes */
 static inline void wa_rpipe_init(struct wahc *wa)
 {
-	spin_lock_init(&wa->rpipe_bm_lock);
+	INIT_LIST_HEAD(&wa->rpipe_delayed_list);
+	spin_lock_init(&wa->rpipe_lock);
 	mutex_init(&wa->rpipe_mutex);
 }
 
@@ -247,6 +277,7 @@
 {
 	edc_init(&wa->nep_edc);
 	atomic_set(&wa->notifs_queued, 0);
+	wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
 	wa_rpipe_init(wa);
 	edc_init(&wa->dti_edc);
 	INIT_LIST_HEAD(&wa->xfer_list);
@@ -255,6 +286,7 @@
 	spin_lock_init(&wa->xfer_list_lock);
 	INIT_WORK(&wa->xfer_enqueue_work, wa_urb_enqueue_run);
 	INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run);
+	wa->dto_in_use = 0;
 	atomic_set(&wa->xfer_id_count, 1);
 }
 
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index fd4f1ce..b48e74c 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -143,17 +143,18 @@
 	kref_init(&rpipe->refcnt);
 	spin_lock_init(&rpipe->seg_lock);
 	INIT_LIST_HEAD(&rpipe->seg_list);
+	INIT_LIST_HEAD(&rpipe->list_node);
 }
 
 static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
+	spin_lock_irqsave(&wa->rpipe_lock, flags);
 	rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx);
 	if (rpipe_idx < wa->rpipes)
 		set_bit(rpipe_idx, wa->rpipe_bm);
-	spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
+	spin_unlock_irqrestore(&wa->rpipe_lock, flags);
 
 	return rpipe_idx;
 }
@@ -162,9 +163,9 @@
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
+	spin_lock_irqsave(&wa->rpipe_lock, flags);
 	clear_bit(rpipe_idx, wa->rpipe_bm);
-	spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
+	spin_unlock_irqrestore(&wa->rpipe_lock, flags);
 }
 
 void rpipe_destroy(struct kref *_rpipe)
@@ -333,7 +334,10 @@
 	/* FIXME: compute so seg_size > ep->maxpktsize */
 	rpipe->descr.wBlocks = cpu_to_le16(16);		/* given */
 	/* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */
-	rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize);
+	if (usb_endpoint_xfer_isoc(&ep->desc))
+		rpipe->descr.wMaxPacketSize = epcd->wOverTheAirPacketSize;
+	else
+		rpipe->descr.wMaxPacketSize = ep->desc.wMaxPacketSize;
 
 	rpipe->descr.hwa_bMaxBurst = max(min_t(unsigned int,
 				epcd->bMaxBurst, 16U), 1U);
@@ -361,8 +365,10 @@
 			epcd->bMaxSequence, 32U), 2U);
 	rpipe->descr.bMaxDataSequence = epcd_max_sequence - 1;
 	rpipe->descr.bInterval = ep->desc.bInterval;
-	/* FIXME: bOverTheAirInterval */
-	rpipe->descr.bOverTheAirInterval = 0;	/* 0 if not isoc */
+	if (usb_endpoint_xfer_isoc(&ep->desc))
+		rpipe->descr.bOverTheAirInterval = epcd->bOverTheAirInterval;
+	else
+		rpipe->descr.bOverTheAirInterval = 0;	/* 0 if not isoc */
 	/* FIXME: xmit power & preamble blah blah */
 	rpipe->descr.bmAttribute = (ep->desc.bmAttributes &
 					USB_ENDPOINT_XFERTYPE_MASK);
@@ -477,7 +483,7 @@
  */
 int wa_rpipes_create(struct wahc *wa)
 {
-	wa->rpipes = wa->wa_descr->wNumRPipes;
+	wa->rpipes = le16_to_cpu(wa->wa_descr->wNumRPipes);
 	wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long),
 			       GFP_KERNEL);
 	if (wa->rpipe_bm == NULL)
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 6ad02f5..ed5abe8 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -91,7 +91,8 @@
 #include "wusbhc.h"
 
 enum {
-	WA_SEGS_MAX = 255,
+	/* [WUSB] section 8.3.3 allocates 7 bits for the segment index. */
+	WA_SEGS_MAX = 128,
 };
 
 enum wa_seg_status {
@@ -107,6 +108,7 @@
 };
 
 static void wa_xfer_delayed_run(struct wa_rpipe *);
+static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting);
 
 /*
  * Life cycle governed by 'struct urb' (the refcount of the struct is
@@ -114,24 +116,27 @@
  * struct).
  */
 struct wa_seg {
-	struct urb urb;
-	struct urb *dto_urb;		/* for data output? */
+	struct urb tr_urb;		/* transfer request urb. */
+	struct urb *isoc_pack_desc_urb;	/* for isoc packet descriptor. */
+	struct urb *dto_urb;		/* for data output. */
 	struct list_head list_node;	/* for rpipe->req_list */
 	struct wa_xfer *xfer;		/* out xfer */
 	u8 index;			/* which segment we are */
+	int isoc_frame_count;	/* number of isoc frames in this segment. */
+	int isoc_frame_offset;	/* starting frame offset in the xfer URB. */
+	int isoc_size;	/* size of all isoc frames sent by this seg. */
 	enum wa_seg_status status;
 	ssize_t result;			/* bytes xfered or error */
 	struct wa_xfer_hdr xfer_hdr;
-	u8 xfer_extra[];		/* xtra space for xfer_hdr_ctl */
 };
 
 static inline void wa_seg_init(struct wa_seg *seg)
 {
-	usb_init_urb(&seg->urb);
+	usb_init_urb(&seg->tr_urb);
 
 	/* set the remaining memory to 0. */
-	memset(((void *)seg) + sizeof(seg->urb), 0,
-		sizeof(*seg) - sizeof(seg->urb));
+	memset(((void *)seg) + sizeof(seg->tr_urb), 0,
+		sizeof(*seg) - sizeof(seg->tr_urb));
 }
 
 /*
@@ -153,12 +158,17 @@
 	unsigned is_dma:1;
 	size_t seg_size;
 	int result;
+	/* Isoc frame that the current transfer buffer corresponds to. */
+	int dto_isoc_frame_index;
 
 	gfp_t gfp;			/* allocation mask */
 
 	struct wusb_dev *wusb_dev;	/* for activity timestamps */
 };
 
+static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer,
+	struct wa_seg *seg, int curr_iso_frame);
+
 static inline void wa_xfer_init(struct wa_xfer *xfer)
 {
 	kref_init(&xfer->refcnt);
@@ -169,7 +179,7 @@
 /*
  * Destroy a transfer structure
  *
- * Note that freeing xfer->seg[cnt]->urb will free the containing
+ * Note that freeing xfer->seg[cnt]->tr_urb will free the containing
  * xfer->seg[cnt] memory that was allocated by __wa_xfer_setup_segs.
  */
 static void wa_xfer_destroy(struct kref *_xfer)
@@ -178,9 +188,17 @@
 	if (xfer->seg) {
 		unsigned cnt;
 		for (cnt = 0; cnt < xfer->segs; cnt++) {
-			usb_free_urb(xfer->seg[cnt]->dto_urb);
-			usb_free_urb(&xfer->seg[cnt]->urb);
+			struct wa_seg *seg = xfer->seg[cnt];
+			if (seg) {
+				usb_free_urb(seg->isoc_pack_desc_urb);
+				if (seg->dto_urb) {
+					kfree(seg->dto_urb->sg);
+					usb_free_urb(seg->dto_urb);
+				}
+				usb_free_urb(&seg->tr_urb);
+			}
 		}
+		kfree(xfer->seg);
 	}
 	kfree(xfer);
 }
@@ -196,6 +214,59 @@
 }
 
 /*
+ * Try to get exclusive access to the DTO endpoint resource.  Return true
+ * if successful.
+ */
+static inline int __wa_dto_try_get(struct wahc *wa)
+{
+	return (test_and_set_bit(0, &wa->dto_in_use) == 0);
+}
+
+/* Release the DTO endpoint resource. */
+static inline void __wa_dto_put(struct wahc *wa)
+{
+	clear_bit_unlock(0, &wa->dto_in_use);
+}
+
+/* Service RPIPEs that are waiting on the DTO resource. */
+static void wa_check_for_delayed_rpipes(struct wahc *wa)
+{
+	unsigned long flags;
+	int dto_waiting = 0;
+	struct wa_rpipe *rpipe;
+
+	spin_lock_irqsave(&wa->rpipe_lock, flags);
+	while (!list_empty(&wa->rpipe_delayed_list) && !dto_waiting) {
+		rpipe = list_first_entry(&wa->rpipe_delayed_list,
+				struct wa_rpipe, list_node);
+		__wa_xfer_delayed_run(rpipe, &dto_waiting);
+		/* remove this RPIPE from the list if it is not waiting. */
+		if (!dto_waiting) {
+			pr_debug("%s: RPIPE %d serviced and removed from delayed list.\n",
+				__func__,
+				le16_to_cpu(rpipe->descr.wRPipeIndex));
+			list_del_init(&rpipe->list_node);
+		}
+	}
+	spin_unlock_irqrestore(&wa->rpipe_lock, flags);
+}
+
+/* add this RPIPE to the end of the delayed RPIPE list. */
+static void wa_add_delayed_rpipe(struct wahc *wa, struct wa_rpipe *rpipe)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wa->rpipe_lock, flags);
+	/* add rpipe to the list if it is not already on it. */
+	if (list_empty(&rpipe->list_node)) {
+		pr_debug("%s: adding RPIPE %d to the delayed list.\n",
+			__func__, le16_to_cpu(rpipe->descr.wRPipeIndex));
+		list_add_tail(&rpipe->list_node, &wa->rpipe_delayed_list);
+	}
+	spin_unlock_irqrestore(&wa->rpipe_lock, flags);
+}
+
+/*
  * xfer is referenced
  *
  * xfer->lock has to be unlocked
@@ -232,6 +303,31 @@
 }
 
 /*
+ * Initialize a transfer's ID
+ *
+ * We need to use a sequential number; if we use the pointer or the
+ * hash of the pointer, it can repeat over sequential transfers and
+ * then it will confuse the HWA....wonder why in hell they put a 32
+ * bit handle in there then.
+ */
+static void wa_xfer_id_init(struct wa_xfer *xfer)
+{
+	xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count);
+}
+
+/* Return the xfer's ID. */
+static inline u32 wa_xfer_id(struct wa_xfer *xfer)
+{
+	return xfer->id;
+}
+
+/* Return the xfer's ID in transport format (little endian). */
+static inline __le32 wa_xfer_id_le32(struct wa_xfer *xfer)
+{
+	return cpu_to_le32(xfer->id);
+}
+
+/*
  * If transfer is done, wrap it up and return true
  *
  * xfer->lock has to be locked
@@ -253,33 +349,37 @@
 		switch (seg->status) {
 		case WA_SEG_DONE:
 			if (found_short && seg->result > 0) {
-				dev_dbg(dev, "xfer %p#%u: bad short segments (%zu)\n",
-					xfer, cnt, seg->result);
+				dev_dbg(dev, "xfer %p ID %08X#%u: bad short segments (%zu)\n",
+					xfer, wa_xfer_id(xfer), cnt,
+					seg->result);
 				urb->status = -EINVAL;
 				goto out;
 			}
 			urb->actual_length += seg->result;
-			if (seg->result < xfer->seg_size
+			if (!(usb_pipeisoc(xfer->urb->pipe))
+				&& seg->result < xfer->seg_size
 			    && cnt != xfer->segs-1)
 				found_short = 1;
-			dev_dbg(dev, "xfer %p#%u: DONE short %d "
+			dev_dbg(dev, "xfer %p ID %08X#%u: DONE short %d "
 				"result %zu urb->actual_length %d\n",
-				xfer, seg->index, found_short, seg->result,
-				urb->actual_length);
+				xfer, wa_xfer_id(xfer), seg->index, found_short,
+				seg->result, urb->actual_length);
 			break;
 		case WA_SEG_ERROR:
 			xfer->result = seg->result;
-			dev_dbg(dev, "xfer %p#%u: ERROR result %zu\n",
-				xfer, seg->index, seg->result);
+			dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zu(0x%08zX)\n",
+				xfer, wa_xfer_id(xfer), seg->index, seg->result,
+				seg->result);
 			goto out;
 		case WA_SEG_ABORTED:
-			dev_dbg(dev, "xfer %p#%u ABORTED: result %d\n",
-				xfer, seg->index, urb->status);
+			dev_dbg(dev, "xfer %p ID %08X#%u ABORTED: result %d\n",
+				xfer, wa_xfer_id(xfer), seg->index,
+				urb->status);
 			xfer->result = urb->status;
 			goto out;
 		default:
-			dev_warn(dev, "xfer %p#%u: is_done bad state %d\n",
-				 xfer, cnt, seg->status);
+			dev_warn(dev, "xfer %p ID %08X#%u: is_done bad state %d\n",
+				 xfer, wa_xfer_id(xfer), cnt, seg->status);
 			xfer->result = -EINVAL;
 			goto out;
 		}
@@ -290,29 +390,6 @@
 }
 
 /*
- * Initialize a transfer's ID
- *
- * We need to use a sequential number; if we use the pointer or the
- * hash of the pointer, it can repeat over sequential transfers and
- * then it will confuse the HWA....wonder why in hell they put a 32
- * bit handle in there then.
- */
-static void wa_xfer_id_init(struct wa_xfer *xfer)
-{
-	xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count);
-}
-
-/*
- * Return the xfer's ID associated with xfer
- *
- * Need to generate a
- */
-static u32 wa_xfer_id(struct wa_xfer *xfer)
-{
-	return xfer->id;
-}
-
-/*
  * Search for a transfer list ID on the HCD's URB list
  *
  * For 32 bit architectures, we use the pointer itself; for 64 bits, a
@@ -356,15 +433,11 @@
  *
  * The callback (see above) does nothing but freeing up the data by
  * putting the URB. Because the URB is allocated at the head of the
- * struct, the whole space we allocated is kfreed.
- *
- * We'll get an 'aborted transaction' xfer result on DTI, that'll
- * politely ignore because at this point the transaction has been
- * marked as aborted already.
+ * struct, the whole space we allocated is kfreed. *
  */
-static void __wa_xfer_abort(struct wa_xfer *xfer)
+static int __wa_xfer_abort(struct wa_xfer *xfer)
 {
-	int result;
+	int result = -ENOMEM;
 	struct device *dev = &xfer->wa->usb_iface->dev;
 	struct wa_xfer_abort_buffer *b;
 	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
@@ -375,7 +448,7 @@
 	b->cmd.bLength =  sizeof(b->cmd);
 	b->cmd.bRequestType = WA_XFER_ABORT;
 	b->cmd.wRPipe = rpipe->descr.wRPipeIndex;
-	b->cmd.dwTransferID = wa_xfer_id(xfer);
+	b->cmd.dwTransferID = wa_xfer_id_le32(xfer);
 
 	usb_init_urb(&b->urb);
 	usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev,
@@ -385,7 +458,7 @@
 	result = usb_submit_urb(&b->urb, GFP_ATOMIC);
 	if (result < 0)
 		goto error_submit;
-	return;				/* callback frees! */
+	return result;				/* callback frees! */
 
 
 error_submit:
@@ -394,11 +467,52 @@
 			xfer, result);
 	kfree(b);
 error_kmalloc:
-	return;
+	return result;
 
 }
 
 /*
+ * Calculate the number of isoc frames starting from isoc_frame_offset
+ * that will fit a in transfer segment.
+ */
+static int __wa_seg_calculate_isoc_frame_count(struct wa_xfer *xfer,
+	int isoc_frame_offset, int *total_size)
+{
+	int segment_size = 0, frame_count = 0;
+	int index = isoc_frame_offset;
+	struct usb_iso_packet_descriptor *iso_frame_desc =
+		xfer->urb->iso_frame_desc;
+
+	while ((index < xfer->urb->number_of_packets)
+		&& ((segment_size + iso_frame_desc[index].length)
+				<= xfer->seg_size)) {
+		/*
+		 * For Alereon HWA devices, only include an isoc frame in a
+		 * segment if it is physically contiguous with the previous
+		 * frame.  This is required because those devices expect
+		 * the isoc frames to be sent as a single USB transaction as
+		 * opposed to one transaction per frame with standard HWA.
+		 */
+		if ((xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC)
+			&& (index > isoc_frame_offset)
+			&& ((iso_frame_desc[index - 1].offset +
+				iso_frame_desc[index - 1].length) !=
+				iso_frame_desc[index].offset))
+			break;
+
+		/* this frame fits. count it. */
+		++frame_count;
+		segment_size += iso_frame_desc[index].length;
+
+		/* move to the next isoc frame. */
+		++index;
+	}
+
+	*total_size = segment_size;
+	return frame_count;
+}
+
+/*
  *
  * @returns < 0 on error, transfer segment request size if ok
  */
@@ -422,43 +536,92 @@
 		result = sizeof(struct wa_xfer_bi);
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
-		dev_err(dev, "FIXME: ISOC not implemented\n");
-		result = -ENOSYS;
-		goto error;
+		if (usb_pipeout(urb->pipe)) {
+			*pxfer_type = WA_XFER_TYPE_ISO;
+			result = sizeof(struct wa_xfer_hwaiso);
+		} else {
+			dev_err(dev, "FIXME: ISOC IN not implemented\n");
+			result = -ENOSYS;
+			goto error;
+		}
+		break;
 	default:
 		/* never happens */
 		BUG();
 		result = -EINVAL;	/* shut gcc up */
-	};
+	}
 	xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0;
 	xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0;
-	xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks)
-		* 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1);
-	/* Compute the segment size and make sure it is a multiple of
-	 * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of
-	 * a check (FIXME) */
+
 	maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize);
-	if (xfer->seg_size < maxpktsize) {
-		dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize "
-			"%zu\n", xfer->seg_size, maxpktsize);
-		result = -EINVAL;
-		goto error;
+	if ((rpipe->descr.bmAttribute & 0x3) == USB_ENDPOINT_XFER_ISOC) {
+		int index = 0;
+
+		xfer->seg_size = maxpktsize;
+		xfer->segs = 0;
+		/*
+		 * loop over urb->number_of_packets to determine how many
+		 * xfer segments will be needed to send the isoc frames.
+		 */
+		while (index < urb->number_of_packets) {
+			int seg_size; /* don't care. */
+			index += __wa_seg_calculate_isoc_frame_count(xfer,
+					index, &seg_size);
+			++xfer->segs;
+		}
+	} else {
+		xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks)
+			* 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1);
+		/* Compute the segment size and make sure it is a multiple of
+		 * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of
+		 * a check (FIXME) */
+		if (xfer->seg_size < maxpktsize) {
+			dev_err(dev,
+				"HW BUG? seg_size %zu smaller than maxpktsize %zu\n",
+				xfer->seg_size, maxpktsize);
+			result = -EINVAL;
+			goto error;
+		}
+		xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize;
+		xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length,
+						xfer->seg_size);
+		if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL)
+			xfer->segs = 1;
 	}
-	xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize;
-	xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, xfer->seg_size);
-	if (xfer->segs >= WA_SEGS_MAX) {
-		dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n",
-			(int)(urb->transfer_buffer_length / xfer->seg_size),
+
+	if (xfer->segs > WA_SEGS_MAX) {
+		dev_err(dev, "BUG? oops, number of segments %zu bigger than %d\n",
+			(urb->transfer_buffer_length/xfer->seg_size),
 			WA_SEGS_MAX);
 		result = -EINVAL;
 		goto error;
 	}
-	if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL)
-		xfer->segs = 1;
 error:
 	return result;
 }
 
+static void __wa_setup_isoc_packet_descr(
+		struct wa_xfer_packet_info_hwaiso *packet_desc,
+		struct wa_xfer *xfer,
+		struct wa_seg *seg) {
+	struct usb_iso_packet_descriptor *iso_frame_desc =
+		xfer->urb->iso_frame_desc;
+	int frame_index;
+
+	/* populate isoc packet descriptor. */
+	packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO;
+	packet_desc->wLength = cpu_to_le16(sizeof(*packet_desc) +
+		(sizeof(packet_desc->PacketLength[0]) *
+			seg->isoc_frame_count));
+	for (frame_index = 0; frame_index < seg->isoc_frame_count;
+		++frame_index) {
+		int offset_index = frame_index + seg->isoc_frame_offset;
+		packet_desc->PacketLength[frame_index] =
+			cpu_to_le16(iso_frame_desc[offset_index].length);
+	}
+}
+
+
 /* Fill in the common request header and xfer-type specific data. */
 static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
 				 struct wa_xfer_hdr *xfer_hdr0,
@@ -466,12 +629,13 @@
 				 size_t xfer_hdr_size)
 {
 	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+	struct wa_seg *seg = xfer->seg[0];
 
-	xfer_hdr0 = &xfer->seg[0]->xfer_hdr;
+	xfer_hdr0 = &seg->xfer_hdr;
 	xfer_hdr0->bLength = xfer_hdr_size;
 	xfer_hdr0->bRequestType = xfer_type;
 	xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex;
-	xfer_hdr0->dwTransferID = wa_xfer_id(xfer);
+	xfer_hdr0->dwTransferID = wa_xfer_id_le32(xfer);
 	xfer_hdr0->bTransferSegment = 0;
 	switch (xfer_type) {
 	case WA_XFER_TYPE_CTL: {
@@ -484,8 +648,18 @@
 	}
 	case WA_XFER_TYPE_BI:
 		break;
-	case WA_XFER_TYPE_ISO:
-		printk(KERN_ERR "FIXME: ISOC not implemented\n");
+	case WA_XFER_TYPE_ISO: {
+		struct wa_xfer_hwaiso *xfer_iso =
+			container_of(xfer_hdr0, struct wa_xfer_hwaiso, hdr);
+		struct wa_xfer_packet_info_hwaiso *packet_desc =
+			((void *)xfer_iso) + xfer_hdr_size;
+
+		/* populate the isoc section of the transfer request. */
+		xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count);
+		/* populate isoc packet descriptor. */
+		__wa_setup_isoc_packet_descr(packet_desc, xfer, seg);
+		break;
+	}
 	default:
 		BUG();
 	};
@@ -494,12 +668,12 @@
 /*
  * Callback for the OUT data phase of the segment request
  *
- * Check wa_seg_cb(); most comments also apply here because this
+ * Check wa_seg_tr_cb(); most comments also apply here because this
  * function does almost the same thing and they work closely
  * together.
  *
  * If the seg request has failed but this DTO phase has succeeded,
- * wa_seg_cb() has already failed the segment and moved the
+ * wa_seg_tr_cb() has already failed the segment and moved the
  * status to WA_SEG_ERROR, so this will go through 'case 0' and
  * effectively do nothing.
  */
@@ -512,6 +686,139 @@
 	struct wa_rpipe *rpipe;
 	unsigned long flags;
 	unsigned rpipe_ready = 0;
+	int data_send_done = 1, release_dto = 0, holding_dto = 0;
+	u8 done = 0;
+	int result;
+
+	/* free the sg if it was used. */
+	kfree(urb->sg);
+	urb->sg = NULL;
+
+	spin_lock_irqsave(&xfer->lock, flags);
+	wa = xfer->wa;
+	dev = &wa->usb_iface->dev;
+	if (usb_pipeisoc(xfer->urb->pipe)) {
+		/* Alereon HWA sends all isoc frames in a single transfer. */
+		if (wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC)
+			xfer->dto_isoc_frame_index += seg->isoc_frame_count;
+		else
+			xfer->dto_isoc_frame_index += 1;
+		if (xfer->dto_isoc_frame_index < seg->isoc_frame_count) {
+			data_send_done = 0;
+			holding_dto = 1; /* checked in error cases. */
+			/*
+			 * if this is the last isoc frame of the segment, we
+			 * can release DTO after sending this frame.
+			 */
+			if ((xfer->dto_isoc_frame_index + 1) >=
+				seg->isoc_frame_count)
+				release_dto = 1;
+		}
+		dev_dbg(dev, "xfer 0x%08X#%u: isoc frame = %d, holding_dto = %d, release_dto = %d.\n",
+			wa_xfer_id(xfer), seg->index,
+			xfer->dto_isoc_frame_index, holding_dto, release_dto);
+	}
+	spin_unlock_irqrestore(&xfer->lock, flags);
+
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&xfer->lock, flags);
+		seg->result += urb->actual_length;
+		if (data_send_done) {
+			dev_dbg(dev, "xfer 0x%08X#%u: data out done (%zu bytes)\n",
+				wa_xfer_id(xfer), seg->index, seg->result);
+			if (seg->status < WA_SEG_PENDING)
+				seg->status = WA_SEG_PENDING;
+		} else {
+			/* should only hit this for isoc xfers. */
+			/*
+			 * Populate the dto URB with the next isoc frame buffer,
+			 * send the URB and release DTO if we no longer need it.
+			 */
+			 __wa_populate_dto_urb_isoc(xfer, seg,
+				seg->isoc_frame_offset +
+				xfer->dto_isoc_frame_index);
+
+			/* resubmit the URB with the next isoc frame. */
+			result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
+			if (result < 0) {
+				dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n",
+				       wa_xfer_id(xfer), seg->index, result);
+				spin_unlock_irqrestore(&xfer->lock, flags);
+				goto error_dto_submit;
+			}
+		}
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (release_dto) {
+			__wa_dto_put(wa);
+			wa_check_for_delayed_rpipes(wa);
+		}
+		break;
+	case -ECONNRESET:	/* URB unlinked; no need to do anything */
+	case -ENOENT:		/* as it was done by the who unlinked us */
+		if (holding_dto) {
+			__wa_dto_put(wa);
+			wa_check_for_delayed_rpipes(wa);
+		}
+		break;
+	default:		/* Other errors ... */
+		dev_err(dev, "xfer 0x%08X#%u: data out error %d\n",
+			wa_xfer_id(xfer), seg->index, urb->status);
+		goto error_default;
+	}
+
+	return;
+
+error_dto_submit:
+error_default:
+	spin_lock_irqsave(&xfer->lock, flags);
+	rpipe = xfer->ep->hcpriv;
+	if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+		    EDC_ERROR_TIMEFRAME)){
+		dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n");
+		wa_reset_all(wa);
+	}
+	if (seg->status != WA_SEG_ERROR) {
+		seg->status = WA_SEG_ERROR;
+		seg->result = urb->status;
+		xfer->segs_done++;
+		__wa_xfer_abort(xfer);
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+	}
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	if (holding_dto) {
+		__wa_dto_put(wa);
+		wa_check_for_delayed_rpipes(wa);
+	}
+	if (done)
+		wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+
+}
+
+/*
+ * Callback for the isoc packet descriptor phase of the segment request
+ *
+ * Check wa_seg_tr_cb(); most comments also apply here because this
+ * function does almost the same thing and they work closely
+ * together.
+ *
+ * If the seg request has failed but this phase has succeeded,
+ * wa_seg_tr_cb() has already failed the segment and moved the
+ * status to WA_SEG_ERROR, so this will go through 'case 0' and
+ * effectively do nothing.
+ */
+static void wa_seg_iso_pack_desc_cb(struct urb *urb)
+{
+	struct wa_seg *seg = urb->context;
+	struct wa_xfer *xfer = seg->xfer;
+	struct wahc *wa;
+	struct device *dev;
+	struct wa_rpipe *rpipe;
+	unsigned long flags;
+	unsigned rpipe_ready = 0;
 	u8 done = 0;
 
 	switch (urb->status) {
@@ -519,11 +826,10 @@
 		spin_lock_irqsave(&xfer->lock, flags);
 		wa = xfer->wa;
 		dev = &wa->usb_iface->dev;
-		dev_dbg(dev, "xfer %p#%u: data out done (%d bytes)\n",
-			xfer, seg->index, urb->actual_length);
-		if (seg->status < WA_SEG_PENDING)
+		dev_dbg(dev, "iso xfer %08X#%u: packet descriptor done\n",
+			wa_xfer_id(xfer), seg->index);
+		if (xfer->is_inbound && seg->status < WA_SEG_PENDING)
 			seg->status = WA_SEG_PENDING;
-		seg->result = urb->actual_length;
 		spin_unlock_irqrestore(&xfer->lock, flags);
 		break;
 	case -ECONNRESET:	/* URB unlinked; no need to do anything */
@@ -534,15 +840,15 @@
 		wa = xfer->wa;
 		dev = &wa->usb_iface->dev;
 		rpipe = xfer->ep->hcpriv;
-		dev_dbg(dev, "xfer %p#%u: data out error %d\n",
-			xfer, seg->index, urb->status);
+		pr_err_ratelimited("iso xfer %08X#%u: packet descriptor error %d\n",
+				wa_xfer_id(xfer), seg->index, urb->status);
 		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
 			    EDC_ERROR_TIMEFRAME)){
-			dev_err(dev, "DTO: URB max acceptable errors "
-				"exceeded, resetting device\n");
+			dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n");
 			wa_reset_all(wa);
 		}
 		if (seg->status != WA_SEG_ERROR) {
+			usb_unlink_urb(seg->dto_urb);
 			seg->status = WA_SEG_ERROR;
 			seg->result = urb->status;
 			xfer->segs_done++;
@@ -572,11 +878,11 @@
  * We have to check before setting the status to WA_SEG_PENDING
  * because sometimes the xfer result callback arrives before this
  * callback (geeeeeeze), so it might happen that we are already in
- * another state. As well, we don't set it if the transfer is inbound,
+ * another state. As well, we don't set it if the transfer is not inbound,
  * as in that case, wa_seg_dto_cb will do it when the OUT data phase
  * finishes.
  */
-static void wa_seg_cb(struct urb *urb)
+static void wa_seg_tr_cb(struct urb *urb)
 {
 	struct wa_seg *seg = urb->context;
 	struct wa_xfer *xfer = seg->xfer;
@@ -592,8 +898,11 @@
 		spin_lock_irqsave(&xfer->lock, flags);
 		wa = xfer->wa;
 		dev = &wa->usb_iface->dev;
-		dev_dbg(dev, "xfer %p#%u: request done\n", xfer, seg->index);
-		if (xfer->is_inbound && seg->status < WA_SEG_PENDING)
+		dev_dbg(dev, "xfer %p ID 0x%08X#%u: request done\n",
+			xfer, wa_xfer_id(xfer), seg->index);
+		if (xfer->is_inbound &&
+			seg->status < WA_SEG_PENDING &&
+			!(usb_pipeisoc(xfer->urb->pipe)))
 			seg->status = WA_SEG_PENDING;
 		spin_unlock_irqrestore(&xfer->lock, flags);
 		break;
@@ -606,14 +915,16 @@
 		dev = &wa->usb_iface->dev;
 		rpipe = xfer->ep->hcpriv;
 		if (printk_ratelimit())
-			dev_err(dev, "xfer %p#%u: request error %d\n",
-				xfer, seg->index, urb->status);
+			dev_err(dev, "xfer %p ID 0x%08X#%u: request error %d\n",
+				xfer, wa_xfer_id(xfer), seg->index,
+				urb->status);
 		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
 			    EDC_ERROR_TIMEFRAME)){
 			dev_err(dev, "DTO: URB max acceptable errors "
 				"exceeded, resetting device\n");
 			wa_reset_all(wa);
 		}
+		usb_unlink_urb(seg->isoc_pack_desc_urb);
 		usb_unlink_urb(seg->dto_urb);
 		seg->status = WA_SEG_ERROR;
 		seg->result = urb->status;
@@ -629,9 +940,11 @@
 	}
 }
 
-/* allocate an SG list to store bytes_to_transfer bytes and copy the
+/*
+ * Allocate an SG list to store bytes_to_transfer bytes and copy the
  * subset of the in_sg that matches the buffer subset
- * we are about to transfer. */
+ * we are about to transfer.
+ */
 static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg,
 	const unsigned int bytes_transferred,
 	const unsigned int bytes_to_transfer, unsigned int *out_num_sgs)
@@ -710,6 +1023,75 @@
 }
 
 /*
+ * Populate DMA buffer info for the isoc dto urb.
+ */
+static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer,
+	struct wa_seg *seg, int curr_iso_frame)
+{
+	seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	seg->dto_urb->sg = NULL;
+	seg->dto_urb->num_sgs = 0;
+	/* dto urb buffer address pulled from iso_frame_desc. */
+	seg->dto_urb->transfer_dma = xfer->urb->transfer_dma +
+		xfer->urb->iso_frame_desc[curr_iso_frame].offset;
+	/* The Alereon HWA sends a single URB with all isoc segs. */
+	if (xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC)
+		seg->dto_urb->transfer_buffer_length = seg->isoc_size;
+	else
+		seg->dto_urb->transfer_buffer_length =
+			xfer->urb->iso_frame_desc[curr_iso_frame].length;
+}
+
+/*
+ * Populate buffer ptr and size, DMA buffer or SG list for the dto urb.
+ */
+static int __wa_populate_dto_urb(struct wa_xfer *xfer,
+	struct wa_seg *seg, size_t buf_itr_offset, size_t buf_itr_size)
+{
+	int result = 0;
+
+	if (xfer->is_dma) {
+		seg->dto_urb->transfer_dma =
+			xfer->urb->transfer_dma + buf_itr_offset;
+		seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		seg->dto_urb->sg = NULL;
+		seg->dto_urb->num_sgs = 0;
+	} else {
+		/* do buffer or SG processing. */
+		seg->dto_urb->transfer_flags &=
+			~URB_NO_TRANSFER_DMA_MAP;
+		/* this should always be 0 before a resubmit. */
+		seg->dto_urb->num_mapped_sgs = 0;
+
+		if (xfer->urb->transfer_buffer) {
+			seg->dto_urb->transfer_buffer =
+				xfer->urb->transfer_buffer +
+				buf_itr_offset;
+			seg->dto_urb->sg = NULL;
+			seg->dto_urb->num_sgs = 0;
+		} else {
+			seg->dto_urb->transfer_buffer = NULL;
+
+			/*
+			 * allocate an SG list to store seg_size bytes
+			 * and copy the subset of the xfer->urb->sg that
+			 * matches the buffer subset we are about to
+			 * read.
+			 */
+			seg->dto_urb->sg = wa_xfer_create_subset_sg(
+				xfer->urb->sg,
+				buf_itr_offset, buf_itr_size,
+				&(seg->dto_urb->num_sgs));
+			if (!(seg->dto_urb->sg))
+				result = -ENOMEM;
+		}
+	}
+	seg->dto_urb->transfer_buffer_length = buf_itr_size;
+
+	return result;
+}
+
+/*
  * Allocate the segs array and initialize each of them
  *
  * The segments are freed by wa_xfer_destroy() when the xfer use count
@@ -719,13 +1101,14 @@
  */
 static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
 {
-	int result, cnt;
+	int result, cnt, iso_frame_offset;
 	size_t alloc_size = sizeof(*xfer->seg[0])
 		- sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size;
 	struct usb_device *usb_dev = xfer->wa->usb_dev;
 	const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd;
 	struct wa_seg *seg;
 	size_t buf_itr, buf_size, buf_itr_size;
+	int xfer_isoc_frame_offset = 0;
 
 	result = -ENOMEM;
 	xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC);
@@ -733,18 +1116,35 @@
 		goto error_segs_kzalloc;
 	buf_itr = 0;
 	buf_size = xfer->urb->transfer_buffer_length;
+	iso_frame_offset = 0;
 	for (cnt = 0; cnt < xfer->segs; cnt++) {
-		seg = xfer->seg[cnt] = kmalloc(alloc_size, GFP_ATOMIC);
+		size_t iso_pkt_descr_size = 0;
+		int seg_isoc_frame_count = 0, seg_isoc_size = 0;
+
+		if (usb_pipeisoc(xfer->urb->pipe)) {
+			seg_isoc_frame_count =
+				__wa_seg_calculate_isoc_frame_count(xfer,
+					xfer_isoc_frame_offset, &seg_isoc_size);
+
+			iso_pkt_descr_size =
+				sizeof(struct wa_xfer_packet_info_hwaiso) +
+				(seg_isoc_frame_count * sizeof(__le16));
+		}
+		seg = xfer->seg[cnt] = kmalloc(alloc_size + iso_pkt_descr_size,
+						GFP_ATOMIC);
 		if (seg == NULL)
 			goto error_seg_kmalloc;
 		wa_seg_init(seg);
 		seg->xfer = xfer;
 		seg->index = cnt;
-		usb_fill_bulk_urb(&seg->urb, usb_dev,
+		seg->isoc_frame_count = seg_isoc_frame_count;
+		seg->isoc_frame_offset = xfer_isoc_frame_offset;
+		seg->isoc_size = seg_isoc_size;
+		usb_fill_bulk_urb(&seg->tr_urb, usb_dev,
 				  usb_sndbulkpipe(usb_dev,
 						  dto_epd->bEndpointAddress),
 				  &seg->xfer_hdr, xfer_hdr_size,
-				  wa_seg_cb, seg);
+				  wa_seg_tr_cb, seg);
 		buf_itr_size = min(buf_size, xfer->seg_size);
 		if (xfer->is_inbound == 0 && buf_size > 0) {
 			/* outbound data. */
@@ -756,69 +1156,64 @@
 				usb_sndbulkpipe(usb_dev,
 						dto_epd->bEndpointAddress),
 				NULL, 0, wa_seg_dto_cb, seg);
-			if (xfer->is_dma) {
-				seg->dto_urb->transfer_dma =
-					xfer->urb->transfer_dma + buf_itr;
-				seg->dto_urb->transfer_flags |=
-					URB_NO_TRANSFER_DMA_MAP;
-				seg->dto_urb->transfer_buffer = NULL;
-				seg->dto_urb->sg = NULL;
-				seg->dto_urb->num_sgs = 0;
+
+			if (usb_pipeisoc(xfer->urb->pipe)) {
+				/* iso packet descriptor. */
+				seg->isoc_pack_desc_urb =
+						usb_alloc_urb(0, GFP_ATOMIC);
+				if (seg->isoc_pack_desc_urb == NULL)
+					goto error_iso_pack_desc_alloc;
+				/*
+				 * The buffer for the isoc packet descriptor
+				 * after the transfer request header in the
+				 * segment object memory buffer.
+				 */
+				usb_fill_bulk_urb(
+					seg->isoc_pack_desc_urb, usb_dev,
+					usb_sndbulkpipe(usb_dev,
+						dto_epd->bEndpointAddress),
+					(void *)(&seg->xfer_hdr) +
+						xfer_hdr_size,
+					iso_pkt_descr_size,
+					wa_seg_iso_pack_desc_cb, seg);
+
+				/*
+				 * Fill in the xfer buffer information for the
+				 * first isoc frame.  Subsequent frames in this
+				 * segment will be filled in and sent from the
+				 * DTO completion routine, if needed.
+				 */
+				__wa_populate_dto_urb_isoc(xfer, seg,
+					xfer_isoc_frame_offset);
+				/* adjust starting frame offset for next seg. */
+				xfer_isoc_frame_offset += seg_isoc_frame_count;
 			} else {
-				/* do buffer or SG processing. */
-				seg->dto_urb->transfer_flags &=
-					~URB_NO_TRANSFER_DMA_MAP;
-				/* this should always be 0 before a resubmit. */
-				seg->dto_urb->num_mapped_sgs = 0;
+				/* fill in the xfer buffer information. */
+				result = __wa_populate_dto_urb(xfer, seg,
+							buf_itr, buf_itr_size);
+				if (result < 0)
+					goto error_seg_outbound_populate;
 
-				if (xfer->urb->transfer_buffer) {
-					seg->dto_urb->transfer_buffer =
-						xfer->urb->transfer_buffer +
-						buf_itr;
-					seg->dto_urb->sg = NULL;
-					seg->dto_urb->num_sgs = 0;
-				} else {
-					/* allocate an SG list to store seg_size
-					    bytes and copy the subset of the
-					    xfer->urb->sg that matches the
-					    buffer subset we are about to read.
-					*/
-					seg->dto_urb->sg =
-						wa_xfer_create_subset_sg(
-						xfer->urb->sg,
-						buf_itr, buf_itr_size,
-						&(seg->dto_urb->num_sgs));
-
-					if (!(seg->dto_urb->sg)) {
-						seg->dto_urb->num_sgs	= 0;
-						goto error_sg_alloc;
-					}
-
-					seg->dto_urb->transfer_buffer = NULL;
-				}
+				buf_itr += buf_itr_size;
+				buf_size -= buf_itr_size;
 			}
-			seg->dto_urb->transfer_buffer_length = buf_itr_size;
 		}
 		seg->status = WA_SEG_READY;
-		buf_itr += buf_itr_size;
-		buf_size -= buf_itr_size;
 	}
 	return 0;
 
-error_sg_alloc:
+	/*
+	 * Free the memory for the current segment which failed to init.
+	 * Use the fact that cnt is left at were it failed.  The remaining
+	 * segments will be cleaned up by wa_xfer_destroy.
+	 */
+error_iso_pack_desc_alloc:
+error_seg_outbound_populate:
 	usb_free_urb(xfer->seg[cnt]->dto_urb);
 error_dto_alloc:
 	kfree(xfer->seg[cnt]);
-	cnt--;
+	xfer->seg[cnt] = NULL;
 error_seg_kmalloc:
-	/* use the fact that cnt is left at were it failed */
-	for (; cnt >= 0; cnt--) {
-		if (xfer->seg[cnt] && xfer->is_inbound == 0) {
-			usb_free_urb(xfer->seg[cnt]->dto_urb);
-			kfree(xfer->seg[cnt]->dto_urb->sg);
-		}
-		kfree(xfer->seg[cnt]);
-	}
 error_segs_kzalloc:
 	return result;
 }
@@ -856,21 +1251,45 @@
 	wa_xfer_id_init(xfer);
 	__wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size);
 
-	/* Fill remainig headers */
+	/* Fill remaining headers */
 	xfer_hdr = xfer_hdr0;
-	transfer_size = urb->transfer_buffer_length;
-	xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ?
-		xfer->seg_size : transfer_size;
-	transfer_size -=  xfer->seg_size;
-	for (cnt = 1; cnt < xfer->segs; cnt++) {
-		xfer_hdr = &xfer->seg[cnt]->xfer_hdr;
-		memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size);
-		xfer_hdr->bTransferSegment = cnt;
-		xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ?
-			cpu_to_le32(xfer->seg_size)
-			: cpu_to_le32(transfer_size);
-		xfer->seg[cnt]->status = WA_SEG_READY;
+	if (xfer_type == WA_XFER_TYPE_ISO) {
+		xfer_hdr0->dwTransferLength =
+			cpu_to_le32(xfer->seg[0]->isoc_size);
+		for (cnt = 1; cnt < xfer->segs; cnt++) {
+			struct wa_xfer_packet_info_hwaiso *packet_desc;
+			struct wa_seg *seg = xfer->seg[cnt];
+
+			xfer_hdr = &seg->xfer_hdr;
+			packet_desc = ((void *)xfer_hdr) + xfer_hdr_size;
+			/*
+			 * Copy values from the 0th header. Segment specific
+			 * values are set below.
+			 */
+			memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size);
+			xfer_hdr->bTransferSegment = cnt;
+			xfer_hdr->dwTransferLength =
+				cpu_to_le32(seg->isoc_size);
+			__wa_setup_isoc_packet_descr(packet_desc, xfer, seg);
+			seg->status = WA_SEG_READY;
+		}
+	} else {
+		transfer_size = urb->transfer_buffer_length;
+		xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ?
+			cpu_to_le32(xfer->seg_size) :
+			cpu_to_le32(transfer_size);
 		transfer_size -=  xfer->seg_size;
+		for (cnt = 1; cnt < xfer->segs; cnt++) {
+			xfer_hdr = &xfer->seg[cnt]->xfer_hdr;
+			memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size);
+			xfer_hdr->bTransferSegment = cnt;
+			xfer_hdr->dwTransferLength =
+				transfer_size > xfer->seg_size ?
+					cpu_to_le32(xfer->seg_size)
+					: cpu_to_le32(transfer_size);
+			xfer->seg[cnt]->status = WA_SEG_READY;
+			transfer_size -=  xfer->seg_size;
+		}
 	}
 	xfer_hdr->bTransferSegment |= 0x80;	/* this is the last segment */
 	result = 0;
@@ -885,20 +1304,46 @@
  * rpipe->seg_lock is held!
  */
 static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer,
-			   struct wa_seg *seg)
+			   struct wa_seg *seg, int *dto_done)
 {
 	int result;
-	result = usb_submit_urb(&seg->urb, GFP_ATOMIC);
+
+	/* default to done unless we encounter a multi-frame isoc segment. */
+	*dto_done = 1;
+
+	/* submit the transfer request. */
+	result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC);
 	if (result < 0) {
-		printk(KERN_ERR "xfer %p#%u: REQ submit failed: %d\n",
-		       xfer, seg->index, result);
+		pr_err("%s: xfer %p#%u: REQ submit failed: %d\n",
+		       __func__, xfer, seg->index, result);
 		goto error_seg_submit;
 	}
+	/* submit the isoc packet descriptor if present. */
+	if (seg->isoc_pack_desc_urb) {
+		struct wahc *wa = xfer->wa;
+
+		result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC);
+		if (result < 0) {
+			pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n",
+			       __func__, xfer, seg->index, result);
+			goto error_iso_pack_desc_submit;
+		}
+		xfer->dto_isoc_frame_index = 0;
+		/*
+		 * If this segment contains more than one isoc frame, hold
+		 * onto the dto resource until we send all frames.
+		 * Only applies to non-Alereon devices.
+		 */
+		if (((wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) == 0)
+			&& (seg->isoc_frame_count > 1))
+			*dto_done = 0;
+	}
+	/* submit the out data if this is an out request. */
 	if (seg->dto_urb) {
 		result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
 		if (result < 0) {
-			printk(KERN_ERR "xfer %p#%u: DTO submit failed: %d\n",
-			       xfer, seg->index, result);
+			pr_err("%s: xfer %p#%u: DTO submit failed: %d\n",
+			       __func__, xfer, seg->index, result);
 			goto error_dto_submit;
 		}
 	}
@@ -907,38 +1352,48 @@
 	return 0;
 
 error_dto_submit:
-	usb_unlink_urb(&seg->urb);
+	usb_unlink_urb(seg->isoc_pack_desc_urb);
+error_iso_pack_desc_submit:
+	usb_unlink_urb(&seg->tr_urb);
 error_seg_submit:
 	seg->status = WA_SEG_ERROR;
 	seg->result = result;
+	*dto_done = 1;
 	return result;
 }
 
 /*
- * Execute more queued request segments until the maximum concurrent allowed
+ * Execute more queued request segments until the maximum concurrent allowed.
+ * Return true if the DTO resource was acquired and released.
  *
  * The ugly unlock/lock sequence on the error path is needed as the
  * xfer->lock normally nests the seg_lock and not viceversa.
- *
  */
-static void wa_xfer_delayed_run(struct wa_rpipe *rpipe)
+static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting)
 {
-	int result;
+	int result, dto_acquired = 0, dto_done = 0;
 	struct device *dev = &rpipe->wa->usb_iface->dev;
 	struct wa_seg *seg;
 	struct wa_xfer *xfer;
 	unsigned long flags;
 
+	*dto_waiting = 0;
+
 	spin_lock_irqsave(&rpipe->seg_lock, flags);
 	while (atomic_read(&rpipe->segs_available) > 0
-	      && !list_empty(&rpipe->seg_list)) {
+	      && !list_empty(&rpipe->seg_list)
+	      && (dto_acquired = __wa_dto_try_get(rpipe->wa))) {
 		seg = list_first_entry(&(rpipe->seg_list), struct wa_seg,
 				 list_node);
 		list_del(&seg->list_node);
 		xfer = seg->xfer;
-		result = __wa_seg_submit(rpipe, xfer, seg);
-		dev_dbg(dev, "xfer %p#%u submitted from delayed [%d segments available] %d\n",
-			xfer, seg->index, atomic_read(&rpipe->segs_available), result);
+		result = __wa_seg_submit(rpipe, xfer, seg, &dto_done);
+		/* release the dto resource if this RPIPE is done with it. */
+		if (dto_done)
+			__wa_dto_put(rpipe->wa);
+		dev_dbg(dev, "xfer %p ID %08X#%u submitted from delayed [%d segments available] %d\n",
+			xfer, wa_xfer_id(xfer), seg->index,
+			atomic_read(&rpipe->segs_available), result);
 		if (unlikely(result < 0)) {
 			spin_unlock_irqrestore(&rpipe->seg_lock, flags);
 			spin_lock_irqsave(&xfer->lock, flags);
@@ -948,7 +1403,37 @@
 			spin_lock_irqsave(&rpipe->seg_lock, flags);
 		}
 	}
+	/*
+	 * Mark this RPIPE as waiting if dto was not acquired, there are
+	 * delayed segs and no active transfers to wake us up later.
+	 */
+	if (!dto_acquired && !list_empty(&rpipe->seg_list)
+		&& (atomic_read(&rpipe->segs_available) ==
+			le16_to_cpu(rpipe->descr.wRequests)))
+		*dto_waiting = 1;
+
 	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+
+	return dto_done;
+}
+
+static void wa_xfer_delayed_run(struct wa_rpipe *rpipe)
+{
+	int dto_waiting;
+	int dto_done = __wa_xfer_delayed_run(rpipe, &dto_waiting);
+
+	/*
+	 * If this RPIPE is waiting on the DTO resource, add it to the tail of
+	 * the waiting list.
+	 * Otherwise, if the WA DTO resource was acquired and released by
+	 *  __wa_xfer_delayed_run, another RPIPE may have attempted to acquire
+	 * DTO and failed during that time.  Check the delayed list and process
+	 * any waiters.  Start searching from the next RPIPE index.
+	 */
+	if (dto_waiting)
+		wa_add_delayed_rpipe(rpipe->wa, rpipe);
+	else if (dto_done)
+		wa_check_for_delayed_rpipes(rpipe->wa);
 }
 
 /*
@@ -960,7 +1445,7 @@
  */
 static int __wa_xfer_submit(struct wa_xfer *xfer)
 {
-	int result;
+	int result, dto_acquired = 0, dto_done = 0, dto_waiting = 0;
 	struct wahc *wa = xfer->wa;
 	struct device *dev = &wa->usb_iface->dev;
 	unsigned cnt;
@@ -979,27 +1464,58 @@
 	result = 0;
 	spin_lock_irqsave(&rpipe->seg_lock, flags);
 	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		int delay_seg = 1;
+
 		available = atomic_read(&rpipe->segs_available);
 		empty = list_empty(&rpipe->seg_list);
 		seg = xfer->seg[cnt];
-		dev_dbg(dev, "xfer %p#%u: available %u empty %u (%s)\n",
-			xfer, cnt, available, empty,
-			available == 0 || !empty ? "delayed" : "submitted");
-		if (available == 0 || !empty) {
-			dev_dbg(dev, "xfer %p#%u: delayed\n", xfer, cnt);
+		if (available && empty) {
+			/*
+			 * Only attempt to acquire DTO if we have a segment
+			 * to send.
+			 */
+			dto_acquired = __wa_dto_try_get(rpipe->wa);
+			if (dto_acquired) {
+				delay_seg = 0;
+				result = __wa_seg_submit(rpipe, xfer, seg,
+							&dto_done);
+				dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u submitted\n",
+					xfer, wa_xfer_id(xfer), cnt, available,
+					empty);
+				if (dto_done)
+					__wa_dto_put(rpipe->wa);
+
+				if (result < 0) {
+					__wa_xfer_abort(xfer);
+					goto error_seg_submit;
+				}
+			}
+		}
+
+		if (delay_seg) {
+			dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u delayed\n",
+				xfer, wa_xfer_id(xfer), cnt, available,  empty);
 			seg->status = WA_SEG_DELAYED;
 			list_add_tail(&seg->list_node, &rpipe->seg_list);
-		} else {
-			result = __wa_seg_submit(rpipe, xfer, seg);
-			if (result < 0) {
-				__wa_xfer_abort(xfer);
-				goto error_seg_submit;
-			}
 		}
 		xfer->segs_submitted++;
 	}
 error_seg_submit:
+	/*
+	 * Mark this RPIPE as waiting if dto was not acquired, there are
+	 * delayed segs and no active transfers to wake us up later.
+	 */
+	if (!dto_acquired && !list_empty(&rpipe->seg_list)
+		&& (atomic_read(&rpipe->segs_available) ==
+			le16_to_cpu(rpipe->descr.wRequests)))
+		dto_waiting = 1;
 	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+
+	if (dto_waiting)
+		wa_add_delayed_rpipe(rpipe->wa, rpipe);
+	else if (dto_done)
+		wa_check_for_delayed_rpipes(rpipe->wa);
+
 	return result;
 }
 
@@ -1025,7 +1541,7 @@
  * result never kicks in, the xfer will timeout from the USB code and
  * dequeue() will be called.
  */
-static void wa_urb_enqueue_b(struct wa_xfer *xfer)
+static int wa_urb_enqueue_b(struct wa_xfer *xfer)
 {
 	int result;
 	unsigned long flags;
@@ -1036,18 +1552,22 @@
 	unsigned done;
 
 	result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp);
-	if (result < 0)
+	if (result < 0) {
+		pr_err("%s: error_rpipe_get\n", __func__);
 		goto error_rpipe_get;
+	}
 	result = -ENODEV;
 	/* FIXME: segmentation broken -- kills DWA */
 	mutex_lock(&wusbhc->mutex);		/* get a WUSB dev */
 	if (urb->dev == NULL) {
 		mutex_unlock(&wusbhc->mutex);
+		pr_err("%s: error usb dev gone\n", __func__);
 		goto error_dev_gone;
 	}
 	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
 	if (wusb_dev == NULL) {
 		mutex_unlock(&wusbhc->mutex);
+		pr_err("%s: error wusb dev gone\n", __func__);
 		goto error_dev_gone;
 	}
 	mutex_unlock(&wusbhc->mutex);
@@ -1055,21 +1575,28 @@
 	spin_lock_irqsave(&xfer->lock, flags);
 	xfer->wusb_dev = wusb_dev;
 	result = urb->status;
-	if (urb->status != -EINPROGRESS)
+	if (urb->status != -EINPROGRESS) {
+		pr_err("%s: error_dequeued\n", __func__);
 		goto error_dequeued;
+	}
 
 	result = __wa_xfer_setup(xfer, urb);
-	if (result < 0)
+	if (result < 0) {
+		pr_err("%s: error_xfer_setup\n", __func__);
 		goto error_xfer_setup;
+	}
 	result = __wa_xfer_submit(xfer);
-	if (result < 0)
+	if (result < 0) {
+		pr_err("%s: error_xfer_submit\n", __func__);
 		goto error_xfer_submit;
+	}
 	spin_unlock_irqrestore(&xfer->lock, flags);
-	return;
+	return 0;
 
-	/* this is basically wa_xfer_completion() broken up wa_xfer_giveback()
-	 * does a wa_xfer_put() that will call wa_xfer_destroy() and clean
-	 * upundo setup().
+	/*
+	 * this is basically wa_xfer_completion() broken up wa_xfer_giveback()
+	 * does a wa_xfer_put() that will call wa_xfer_destroy() and undo
+	 * setup().
 	 */
 error_xfer_setup:
 error_dequeued:
@@ -1081,8 +1608,7 @@
 	rpipe_put(xfer->ep->hcpriv);
 error_rpipe_get:
 	xfer->result = result;
-	wa_xfer_giveback(xfer);
-	return;
+	return result;
 
 error_xfer_submit:
 	done = __wa_xfer_is_done(xfer);
@@ -1090,6 +1616,8 @@
 	spin_unlock_irqrestore(&xfer->lock, flags);
 	if (done)
 		wa_xfer_completion(xfer);
+	/* return success since the completion routine will run. */
+	return 0;
 }
 
 /*
@@ -1123,7 +1651,8 @@
 		list_del_init(&xfer->list_node);
 
 		urb = xfer->urb;
-		wa_urb_enqueue_b(xfer);
+		if (wa_urb_enqueue_b(xfer) < 0)
+			wa_xfer_giveback(xfer);
 		usb_put_urb(urb);	/* taken when queuing */
 	}
 }
@@ -1229,7 +1758,19 @@
 		spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags);
 		queue_work(wusbd, &wa->xfer_enqueue_work);
 	} else {
-		wa_urb_enqueue_b(xfer);
+		result = wa_urb_enqueue_b(xfer);
+		if (result < 0) {
+			/*
+			 * URB submit/enqueue failed.  Clean up, return an
+			 * error and do not run the callback.  This avoids
+			 * an infinite submit/complete loop.
+			 */
+			dev_err(dev, "%s: URB enqueue failed: %d\n",
+			   __func__, result);
+			wa_put(xfer->wa);
+			wa_xfer_put(xfer);
+			return result;
+		}
 	}
 	return 0;
 
@@ -1264,7 +1805,7 @@
 	struct wa_xfer *xfer;
 	struct wa_seg *seg;
 	struct wa_rpipe *rpipe;
-	unsigned cnt;
+	unsigned cnt, done = 0, xfer_abort_pending;
 	unsigned rpipe_ready = 0;
 
 	xfer = urb->hcpriv;
@@ -1278,6 +1819,7 @@
 		goto out;
 	}
 	spin_lock_irqsave(&xfer->lock, flags);
+	pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer));
 	rpipe = xfer->ep->hcpriv;
 	if (rpipe == NULL) {
 		pr_debug("%s: xfer id 0x%08X has no RPIPE.  %s",
@@ -1293,9 +1835,11 @@
 	if (xfer->seg == NULL)  	/* still hasn't reached */
 		goto out_unlock;	/* setup(), enqueue_b() completes */
 	/* Ok, the xfer is in flight already, it's been setup and submitted.*/
-	__wa_xfer_abort(xfer);
+	xfer_abort_pending = __wa_xfer_abort(xfer) >= 0;
 	for (cnt = 0; cnt < xfer->segs; cnt++) {
 		seg = xfer->seg[cnt];
+		pr_debug("%s: xfer id 0x%08X#%d status = %d\n",
+			__func__, wa_xfer_id(xfer), cnt, seg->status);
 		switch (seg->status) {
 		case WA_SEG_NOTREADY:
 		case WA_SEG_READY:
@@ -1304,42 +1848,50 @@
 			WARN_ON(1);
 			break;
 		case WA_SEG_DELAYED:
+			/*
+			 * delete from rpipe delayed list.  If no segments on
+			 * this xfer have been submitted, __wa_xfer_is_done will
+			 * trigger a giveback below.  Otherwise, the submitted
+			 * segments will be completed in the DTI interrupt.
+			 */
 			seg->status = WA_SEG_ABORTED;
 			spin_lock_irqsave(&rpipe->seg_lock, flags2);
 			list_del(&seg->list_node);
 			xfer->segs_done++;
-			rpipe_ready = rpipe_avail_inc(rpipe);
 			spin_unlock_irqrestore(&rpipe->seg_lock, flags2);
 			break;
-		case WA_SEG_SUBMITTED:
-			seg->status = WA_SEG_ABORTED;
-			usb_unlink_urb(&seg->urb);
-			if (xfer->is_inbound == 0)
-				usb_unlink_urb(seg->dto_urb);
-			xfer->segs_done++;
-			rpipe_ready = rpipe_avail_inc(rpipe);
-			break;
-		case WA_SEG_PENDING:
-			seg->status = WA_SEG_ABORTED;
-			xfer->segs_done++;
-			rpipe_ready = rpipe_avail_inc(rpipe);
-			break;
-		case WA_SEG_DTI_PENDING:
-			usb_unlink_urb(wa->dti_urb);
-			seg->status = WA_SEG_ABORTED;
-			xfer->segs_done++;
-			rpipe_ready = rpipe_avail_inc(rpipe);
-			break;
 		case WA_SEG_DONE:
 		case WA_SEG_ERROR:
 		case WA_SEG_ABORTED:
 			break;
+			/*
+			 * In the states below, the HWA device already knows
+			 * about the transfer.  If an abort request was sent,
+			 * allow the HWA to process it and wait for the
+			 * results.  Otherwise, the DTI state and seg completed
+			 * counts can get out of sync.
+			 */
+		case WA_SEG_SUBMITTED:
+		case WA_SEG_PENDING:
+		case WA_SEG_DTI_PENDING:
+			/*
+			 * Check if the abort was successfully sent.  This could
+			 * be false if the HWA has been removed but we haven't
+			 * gotten the disconnect notification yet.
+			 */
+			if (!xfer_abort_pending) {
+				seg->status = WA_SEG_ABORTED;
+				rpipe_ready = rpipe_avail_inc(rpipe);
+				xfer->segs_done++;
+			}
+			break;
 		}
 	}
 	xfer->result = urb->status;	/* -ENOENT or -ECONNRESET */
-	__wa_xfer_is_done(xfer);
+	done = __wa_xfer_is_done(xfer);
 	spin_unlock_irqrestore(&xfer->lock, flags);
-	wa_xfer_completion(xfer);
+	if (done)
+		wa_xfer_completion(xfer);
 	if (rpipe_ready)
 		wa_xfer_delayed_run(rpipe);
 	return 0;
@@ -1410,13 +1962,56 @@
 }
 
 /*
+ * If a last segment flag and/or a transfer result error is encountered,
+ * no other segment transfer results will be returned from the device.
+ * Mark the remaining submitted or pending xfers as completed so that
+ * the xfer will complete cleanly.
+ */
+static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
+		struct wa_seg *incoming_seg)
+{
+	int index;
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+	for (index = incoming_seg->index + 1; index < xfer->segs_submitted;
+		index++) {
+		struct wa_seg *current_seg = xfer->seg[index];
+
+		BUG_ON(current_seg == NULL);
+
+		switch (current_seg->status) {
+		case WA_SEG_SUBMITTED:
+		case WA_SEG_PENDING:
+		case WA_SEG_DTI_PENDING:
+			rpipe_avail_inc(rpipe);
+		/*
+		 * do not increment RPIPE avail for the WA_SEG_DELAYED case
+		 * since it has not been submitted to the RPIPE.
+		 */
+		case WA_SEG_DELAYED:
+			xfer->segs_done++;
+			current_seg->status = incoming_seg->status;
+			break;
+		case WA_SEG_ABORTED:
+			break;
+		default:
+			WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n",
+				__func__, wa_xfer_id(xfer), index,
+				current_seg->status);
+			break;
+		}
+	}
+}
+
+/*
  * Process a xfer result completion message
  *
- * inbound transfers: need to schedule a DTI read
+ * inbound transfers: need to schedule a buf_in_urb read
  *
  * FIXME: this function needs to be broken up in parts
  */
-static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer)
+static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
+		struct wa_xfer_result *xfer_result)
 {
 	int result;
 	struct device *dev = &wa->usb_iface->dev;
@@ -1424,8 +2019,7 @@
 	u8 seg_idx;
 	struct wa_seg *seg;
 	struct wa_rpipe *rpipe;
-	struct wa_xfer_result *xfer_result = wa->xfer_result;
-	u8 done = 0;
+	unsigned done = 0;
 	u8 usb_status;
 	unsigned rpipe_ready = 0;
 
@@ -1436,8 +2030,8 @@
 	seg = xfer->seg[seg_idx];
 	rpipe = xfer->ep->hcpriv;
 	usb_status = xfer_result->bTransferStatus;
-	dev_dbg(dev, "xfer %p#%u: bTransferStatus 0x%02x (seg status %u)\n",
-		xfer, seg_idx, usb_status, seg->status);
+	dev_dbg(dev, "xfer %p ID 0x%08X#%u: bTransferStatus 0x%02x (seg status %u)\n",
+		xfer, wa_xfer_id(xfer), seg_idx, usb_status, seg->status);
 	if (seg->status == WA_SEG_ABORTED
 	    || seg->status == WA_SEG_ERROR)	/* already handled */
 		goto segment_aborted;
@@ -1453,12 +2047,19 @@
 		seg->result = wa_xfer_status_to_errno(usb_status);
 		dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n",
 			xfer, xfer->id, seg->index, usb_status);
+		seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ?
+			WA_SEG_ABORTED : WA_SEG_ERROR;
 		goto error_complete;
 	}
 	/* FIXME: we ignore warnings, tally them for stats */
 	if (usb_status & 0x40) 		/* Warning?... */
 		usb_status = 0;		/* ... pass */
-	if (xfer->is_inbound) {	/* IN data phase: read to buffer */
+	if (usb_pipeisoc(xfer->urb->pipe)) {
+		/* set up WA state to read the isoc packet status next. */
+		wa->dti_isoc_xfer_in_progress = wa_xfer_id(xfer);
+		wa->dti_isoc_xfer_seg = seg_idx;
+		wa->dti_state = WA_DTI_ISOC_PACKET_STATUS_PENDING;
+	} else if (xfer->is_inbound) {	/* IN data phase: read to buffer */
 		seg->status = WA_SEG_DTI_PENDING;
 		BUG_ON(wa->buf_in_urb->status == -EINPROGRESS);
 		/* this should always be 0 before a resubmit. */
@@ -1535,12 +2136,14 @@
 			xfer, seg_idx, result);
 	seg->result = result;
 	kfree(wa->buf_in_urb->sg);
+	wa->buf_in_urb->sg = NULL;
 error_sg_alloc:
 	__wa_xfer_abort(xfer);
-error_complete:
 	seg->status = WA_SEG_ERROR;
+error_complete:
 	xfer->segs_done++;
 	rpipe_ready = rpipe_avail_inc(rpipe);
+	wa_complete_remaining_xfer_segs(xfer, seg);
 	done = __wa_xfer_is_done(xfer);
 	/*
 	 * queue work item to clear STALL for control endpoints.
@@ -1552,10 +2155,8 @@
 
 		dev_info(dev, "Control EP stall.  Queue delayed work.\n");
 		spin_lock_irq(&wa->xfer_list_lock);
-		/* remove xfer from xfer_list. */
-		list_del(&xfer->list_node);
-		/* add xfer to xfer_errored_list. */
-		list_add_tail(&xfer->list_node, &wa->xfer_errored_list);
+		/* move xfer from xfer_list to xfer_errored_list. */
+		list_move_tail(&xfer->list_node, &wa->xfer_errored_list);
 		spin_unlock_irq(&wa->xfer_list_lock);
 		spin_unlock_irqrestore(&xfer->lock, flags);
 		queue_work(wusbd, &wa->xfer_error_work);
@@ -1587,6 +2188,90 @@
 }
 
 /*
+ * Process a isochronous packet status message
+ *
+ * inbound transfers: need to schedule a buf_in_urb read
+ */
+static void wa_process_iso_packet_status(struct wahc *wa, struct urb *urb)
+{
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_xfer_packet_status_hwaiso *packet_status;
+	struct wa_xfer_packet_status_len_hwaiso *status_array;
+	struct wa_xfer *xfer;
+	unsigned long flags;
+	struct wa_seg *seg;
+	struct wa_rpipe *rpipe;
+	unsigned done = 0;
+	unsigned rpipe_ready = 0, seg_index;
+	int expected_size;
+
+	/* We have a xfer result buffer; check it */
+	dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n",
+		urb->actual_length, urb->transfer_buffer);
+	packet_status = (struct wa_xfer_packet_status_hwaiso *)(wa->dti_buf);
+	if (packet_status->bPacketType != WA_XFER_ISO_PACKET_STATUS) {
+		dev_err(dev, "DTI Error: isoc packet status--bad type 0x%02x\n",
+			packet_status->bPacketType);
+		goto error_parse_buffer;
+	}
+	xfer = wa_xfer_get_by_id(wa, wa->dti_isoc_xfer_in_progress);
+	if (xfer == NULL) {
+		dev_err(dev, "DTI Error: isoc packet status--unknown xfer 0x%08x\n",
+			wa->dti_isoc_xfer_in_progress);
+		goto error_parse_buffer;
+	}
+	spin_lock_irqsave(&xfer->lock, flags);
+	if (unlikely(wa->dti_isoc_xfer_seg >= xfer->segs))
+		goto error_bad_seg;
+	seg = xfer->seg[wa->dti_isoc_xfer_seg];
+	rpipe = xfer->ep->hcpriv;
+	expected_size = sizeof(*packet_status) +
+			(sizeof(packet_status->PacketStatus[0]) *
+			seg->isoc_frame_count);
+	if (urb->actual_length != expected_size) {
+		dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %d needed)\n",
+			urb->actual_length, expected_size);
+		goto error_bad_seg;
+	}
+	if (le16_to_cpu(packet_status->wLength) != expected_size) {
+		dev_err(dev, "DTI Error: isoc packet status--bad length %u\n",
+			le16_to_cpu(packet_status->wLength));
+		goto error_bad_seg;
+	}
+	/* isoc packet status and lengths back xfer urb. */
+	status_array = packet_status->PacketStatus;
+	for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) {
+		xfer->urb->iso_frame_desc[seg->index].status =
+			wa_xfer_status_to_errno(
+			le16_to_cpu(status_array[seg_index].PacketStatus));
+		xfer->urb->iso_frame_desc[seg->index].actual_length =
+			le16_to_cpu(status_array[seg_index].PacketLength);
+	}
+
+	if (!xfer->is_inbound) {
+		/* OUT transfer, complete it -- */
+		seg->status = WA_SEG_DONE;
+		xfer->segs_done++;
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+	}
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
+	if (done)
+		wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+	wa_xfer_put(xfer);
+	return;
+
+error_bad_seg:
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_xfer_put(xfer);
+error_parse_buffer:
+	return;
+}
+
+/*
  * Callback for the IN data phase
  *
  * If successful transition state; otherwise, take a note of the
@@ -1687,56 +2372,61 @@
  * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many
  * errors) in the URBs.
  */
-static void wa_xfer_result_cb(struct urb *urb)
+static void wa_dti_cb(struct urb *urb)
 {
 	int result;
 	struct wahc *wa = urb->context;
 	struct device *dev = &wa->usb_iface->dev;
-	struct wa_xfer_result *xfer_result;
 	u32 xfer_id;
-	struct wa_xfer *xfer;
 	u8 usb_status;
 
 	BUG_ON(wa->dti_urb != urb);
 	switch (wa->dti_urb->status) {
 	case 0:
-		/* We have a xfer result buffer; check it */
-		dev_dbg(dev, "DTI: xfer result %d bytes at %p\n",
-			urb->actual_length, urb->transfer_buffer);
-		if (wa->dti_urb->actual_length != sizeof(*xfer_result)) {
-			dev_err(dev, "DTI Error: xfer result--bad size "
-				"xfer result (%d bytes vs %zu needed)\n",
-				urb->actual_length, sizeof(*xfer_result));
-			break;
+		if (wa->dti_state == WA_DTI_TRANSFER_RESULT_PENDING) {
+			struct wa_xfer_result *xfer_result;
+			struct wa_xfer *xfer;
+
+			/* We have a xfer result buffer; check it */
+			dev_dbg(dev, "DTI: xfer result %d bytes at %p\n",
+				urb->actual_length, urb->transfer_buffer);
+			if (urb->actual_length != sizeof(*xfer_result)) {
+				dev_err(dev, "DTI Error: xfer result--bad size xfer result (%d bytes vs %zu needed)\n",
+					urb->actual_length,
+					sizeof(*xfer_result));
+				break;
+			}
+			xfer_result = (struct wa_xfer_result *)(wa->dti_buf);
+			if (xfer_result->hdr.bLength != sizeof(*xfer_result)) {
+				dev_err(dev, "DTI Error: xfer result--bad header length %u\n",
+					xfer_result->hdr.bLength);
+				break;
+			}
+			if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) {
+				dev_err(dev, "DTI Error: xfer result--bad header type 0x%02x\n",
+					xfer_result->hdr.bNotifyType);
+				break;
+			}
+			usb_status = xfer_result->bTransferStatus & 0x3f;
+			if (usb_status == WA_XFER_STATUS_NOT_FOUND)
+				/* taken care of already */
+				break;
+			xfer_id = le32_to_cpu(xfer_result->dwTransferID);
+			xfer = wa_xfer_get_by_id(wa, xfer_id);
+			if (xfer == NULL) {
+				/* FIXME: transaction not found. */
+				dev_err(dev, "DTI Error: xfer result--unknown xfer 0x%08x (status 0x%02x)\n",
+					xfer_id, usb_status);
+				break;
+			}
+			wa_xfer_result_chew(wa, xfer, xfer_result);
+			wa_xfer_put(xfer);
+		} else if (wa->dti_state == WA_DTI_ISOC_PACKET_STATUS_PENDING) {
+			wa_process_iso_packet_status(wa, urb);
+		} else {
+			dev_err(dev, "DTI Error: unexpected EP state = %d\n",
+				wa->dti_state);
 		}
-		xfer_result = wa->xfer_result;
-		if (xfer_result->hdr.bLength != sizeof(*xfer_result)) {
-			dev_err(dev, "DTI Error: xfer result--"
-				"bad header length %u\n",
-				xfer_result->hdr.bLength);
-			break;
-		}
-		if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) {
-			dev_err(dev, "DTI Error: xfer result--"
-				"bad header type 0x%02x\n",
-				xfer_result->hdr.bNotifyType);
-			break;
-		}
-		usb_status = xfer_result->bTransferStatus & 0x3f;
-		if (usb_status == WA_XFER_STATUS_NOT_FOUND)
-			/* taken care of already */
-			break;
-		xfer_id = xfer_result->dwTransferID;
-		xfer = wa_xfer_get_by_id(wa, xfer_id);
-		if (xfer == NULL) {
-			/* FIXME: transaction might have been cancelled */
-			dev_err(dev, "DTI Error: xfer result--"
-				"unknown xfer 0x%08x (status 0x%02x)\n",
-				xfer_id, usb_status);
-			break;
-		}
-		wa_xfer_result_chew(wa, xfer);
-		wa_xfer_put(xfer);
 		break;
 	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
 	case -ESHUTDOWN:	/* going away! */
@@ -1777,7 +2467,7 @@
  * don't really set it up and start it until the first xfer complete
  * notification arrives, which is what we do here.
  *
- * Follow up in wa_xfer_result_cb(), as that's where the whole state
+ * Follow up in wa_dti_cb(), as that's where the whole state
  * machine starts.
  *
  * So here we just initialize the DTI URB for reading transfer result
@@ -1813,8 +2503,8 @@
 	usb_fill_bulk_urb(
 		wa->dti_urb, wa->usb_dev,
 		usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint),
-		wa->xfer_result, wa->xfer_result_size,
-		wa_xfer_result_cb, wa);
+		wa->dti_buf, wa->dti_buf_size,
+		wa_dti_cb, wa);
 
 	wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (wa->buf_in_urb == NULL) {
@@ -1836,6 +2526,7 @@
 
 error_dti_urb_submit:
 	usb_put_urb(wa->buf_in_urb);
+	wa->buf_in_urb = NULL;
 error_buf_in_urb_alloc:
 	usb_put_urb(wa->dti_urb);
 	wa->dti_urb = NULL;
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
index 9209eaf..80079b8 100644
--- a/drivers/uwb/lc-dev.c
+++ b/drivers/uwb/lc-dev.c
@@ -244,7 +244,7 @@
 static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store);
 
 
-static struct attribute *dev_attrs[] = {
+static struct attribute *uwb_dev_attrs[] = {
 	&dev_attr_EUI_48.attr,
 	&dev_attr_DevAddr.attr,
 	&dev_attr_BPST.attr,
@@ -253,20 +253,10 @@
 	&dev_attr_RSSI.attr,
 	NULL,
 };
-
-static struct attribute_group dev_attr_group = {
-	.attrs = dev_attrs,
-};
-
-static const struct attribute_group *groups[] = {
-	&dev_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(uwb_dev);
 
 /**
  * Device SYSFS registration
- *
- *
  */
 static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev)
 {
@@ -276,7 +266,7 @@
 	/* Device sysfs files are only useful for neighbor devices not
 	   local radio controllers. */
 	if (&uwb_dev->rc->uwb_dev != uwb_dev)
-		dev->groups = groups;
+		dev->groups = uwb_dev_groups;
 	dev->parent = parent_dev;
 	dev_set_drvdata(dev, uwb_dev);
 
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index 5c5b3fc..e3ed6ff 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -201,6 +201,7 @@
 
 	return sprintf(buf, "0x%02x\n", umc->cap_id);
 }
+static DEVICE_ATTR_RO(capability_id);
 
 static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -208,12 +209,14 @@
 
 	return sprintf(buf, "0x%04x\n", umc->version);
 }
+static DEVICE_ATTR_RO(version);
 
-static struct device_attribute umc_dev_attrs[] = {
-	__ATTR_RO(capability_id),
-	__ATTR_RO(version),
-	__ATTR_NULL,
+static struct attribute *umc_dev_attrs[] = {
+	&dev_attr_capability_id.attr,
+	&dev_attr_version.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(umc_dev);
 
 struct bus_type umc_bus_type = {
 	.name		= "umc",
@@ -222,7 +225,7 @@
 	.remove		= umc_device_remove,
 	.suspend        = umc_device_suspend,
 	.resume         = umc_device_resume,
-	.dev_attrs	= umc_dev_attrs,
+	.dev_groups	= umc_dev_groups,
 };
 EXPORT_SYMBOL_GPL(umc_bus_type);
 
diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
index 0393d82..f7447f7 100644
--- a/drivers/video/backlight/atmel-pwm-bl.c
+++ b/drivers/video/backlight/atmel-pwm-bl.c
@@ -118,7 +118,7 @@
 	.update_status  = atmel_pwm_bl_set_intensity,
 };
 
-static int __init atmel_pwm_bl_probe(struct platform_device *pdev)
+static int atmel_pwm_bl_probe(struct platform_device *pdev)
 {
 	struct backlight_properties props;
 	const struct atmel_pwm_bl_platform_data *pdata;
@@ -202,7 +202,7 @@
 	return retval;
 }
 
-static int __exit atmel_pwm_bl_remove(struct platform_device *pdev)
+static int atmel_pwm_bl_remove(struct platform_device *pdev)
 {
 	struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev);
 
@@ -220,10 +220,11 @@
 		.name = "atmel-pwm-bl",
 	},
 	/* REVISIT add suspend() and resume() */
-	.remove = __exit_p(atmel_pwm_bl_remove),
+	.probe = atmel_pwm_bl_probe,
+	.remove = atmel_pwm_bl_remove,
 };
 
-module_platform_driver_probe(atmel_pwm_bl_driver, atmel_pwm_bl_probe);
+module_platform_driver(atmel_pwm_bl_driver);
 
 MODULE_AUTHOR("Hans-Christian egtvedt <hans-christian.egtvedt@atmel.com>");
 MODULE_DESCRIPTION("Atmel PWM backlight driver");
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index 35687fd..4ad24f2 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -3,7 +3,7 @@
  *	core code for console driver using HP's STI firmware
  *
  *	Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *	Copyright (C) 2001-2003 Helge Deller <deller@gmx.de>
+ *	Copyright (C) 2001-2013 Helge Deller <deller@gmx.de>
  *	Copyright (C) 2001-2002 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
  * 
  * TODO:
@@ -30,7 +30,7 @@
 
 #include "../sticore.h"
 
-#define STI_DRIVERVERSION "Version 0.9a"
+#define STI_DRIVERVERSION "Version 0.9b"
 
 static struct sti_struct *default_sti __read_mostly;
 
@@ -73,28 +73,34 @@
 
 static int sti_init_graph(struct sti_struct *sti)
 {
-	struct sti_init_inptr_ext inptr_ext = { 0, };
-	struct sti_init_inptr inptr = {
-		.text_planes	= 3, /* # of text planes (max 3 for STI) */
-		.ext_ptr	= STI_PTR(&inptr_ext)
-	};
-	struct sti_init_outptr outptr = { 0, };
+	struct sti_init_inptr *inptr = &sti->sti_data->init_inptr;
+	struct sti_init_inptr_ext *inptr_ext = &sti->sti_data->init_inptr_ext;
+	struct sti_init_outptr *outptr = &sti->sti_data->init_outptr;
 	unsigned long flags;
-	int ret;
+	int ret, err;
 
 	spin_lock_irqsave(&sti->lock, flags);
 
-	ret = STI_CALL(sti->init_graph, &default_init_flags, &inptr,
-		&outptr, sti->glob_cfg);
+	memset(inptr, 0, sizeof(*inptr));
+	inptr->text_planes = 3; /* # of text planes (max 3 for STI) */
+	memset(inptr_ext, 0, sizeof(*inptr_ext));
+	inptr->ext_ptr = STI_PTR(inptr_ext);
+	outptr->errno = 0;
+
+	ret = sti_call(sti, sti->init_graph, &default_init_flags, inptr,
+		outptr, sti->glob_cfg);
+
+	if (ret >= 0)
+		sti->text_planes = outptr->text_planes;
+	err = outptr->errno;
 
 	spin_unlock_irqrestore(&sti->lock, flags);
 
 	if (ret < 0) {
-		printk(KERN_ERR "STI init_graph failed (ret %d, errno %d)\n",ret,outptr.errno);
+		pr_err("STI init_graph failed (ret %d, errno %d)\n", ret, err);
 		return -1;
 	}
 	
-	sti->text_planes = outptr.text_planes;
 	return 0;
 }
 
@@ -104,16 +110,18 @@
 
 static void sti_inq_conf(struct sti_struct *sti)
 {
-	struct sti_conf_inptr inptr = { 0, };
+	struct sti_conf_inptr *inptr = &sti->sti_data->inq_inptr;
+	struct sti_conf_outptr *outptr = &sti->sti_data->inq_outptr;
 	unsigned long flags;
 	s32 ret;
 
-	sti->outptr.ext_ptr = STI_PTR(&sti->outptr_ext);
+	outptr->ext_ptr = STI_PTR(&sti->sti_data->inq_outptr_ext);
 	
 	do {
 		spin_lock_irqsave(&sti->lock, flags);
-		ret = STI_CALL(sti->inq_conf, &default_conf_flags,
-			&inptr, &sti->outptr, sti->glob_cfg);
+		memset(inptr, 0, sizeof(*inptr));
+		ret = sti_call(sti, sti->inq_conf, &default_conf_flags,
+			inptr, outptr, sti->glob_cfg);
 		spin_unlock_irqrestore(&sti->lock, flags);
 	} while (ret == 1);
 }
@@ -126,7 +134,8 @@
 void
 sti_putc(struct sti_struct *sti, int c, int y, int x)
 {
-	struct sti_font_inptr inptr = {
+	struct sti_font_inptr *inptr = &sti->sti_data->font_inptr;
+	struct sti_font_inptr inptr_default = {
 		.font_start_addr= STI_PTR(sti->font->raw),
 		.index		= c_index(sti, c),
 		.fg_color	= c_fg(sti, c),
@@ -134,14 +143,15 @@
 		.dest_x		= x * sti->font_width,
 		.dest_y		= y * sti->font_height,
 	};
-	struct sti_font_outptr outptr = { 0, };
+	struct sti_font_outptr *outptr = &sti->sti_data->font_outptr;
 	s32 ret;
 	unsigned long flags;
 
 	do {
 		spin_lock_irqsave(&sti->lock, flags);
-		ret = STI_CALL(sti->font_unpmv, &default_font_flags,
-			&inptr, &outptr, sti->glob_cfg);
+		*inptr = inptr_default;
+		ret = sti_call(sti, sti->font_unpmv, &default_font_flags,
+			inptr, outptr, sti->glob_cfg);
 		spin_unlock_irqrestore(&sti->lock, flags);
 	} while (ret == 1);
 }
@@ -156,7 +166,8 @@
 sti_set(struct sti_struct *sti, int src_y, int src_x,
 	int height, int width, u8 color)
 {
-	struct sti_blkmv_inptr inptr = {
+	struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
+	struct sti_blkmv_inptr inptr_default = {
 		.fg_color	= color,
 		.bg_color	= color,
 		.src_x		= src_x,
@@ -166,14 +177,15 @@
 		.width		= width,
 		.height		= height,
 	};
-	struct sti_blkmv_outptr outptr = { 0, };
+	struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
 	s32 ret;
 	unsigned long flags;
 	
 	do {
 		spin_lock_irqsave(&sti->lock, flags);
-		ret = STI_CALL(sti->block_move, &clear_blkmv_flags,
-			&inptr, &outptr, sti->glob_cfg);
+		*inptr = inptr_default;
+		ret = sti_call(sti, sti->block_move, &clear_blkmv_flags,
+			inptr, outptr, sti->glob_cfg);
 		spin_unlock_irqrestore(&sti->lock, flags);
 	} while (ret == 1);
 }
@@ -182,7 +194,8 @@
 sti_clear(struct sti_struct *sti, int src_y, int src_x,
 	  int height, int width, int c)
 {
-	struct sti_blkmv_inptr inptr = {
+	struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
+	struct sti_blkmv_inptr inptr_default = {
 		.fg_color	= c_fg(sti, c),
 		.bg_color	= c_bg(sti, c),
 		.src_x		= src_x * sti->font_width,
@@ -192,14 +205,15 @@
 		.width		= width * sti->font_width,
 		.height		= height* sti->font_height,
 	};
-	struct sti_blkmv_outptr outptr = { 0, };
+	struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
 	s32 ret;
 	unsigned long flags;
 
 	do {
 		spin_lock_irqsave(&sti->lock, flags);
-		ret = STI_CALL(sti->block_move, &clear_blkmv_flags,
-			&inptr, &outptr, sti->glob_cfg);
+		*inptr = inptr_default;
+		ret = sti_call(sti, sti->block_move, &clear_blkmv_flags,
+			inptr, outptr, sti->glob_cfg);
 		spin_unlock_irqrestore(&sti->lock, flags);
 	} while (ret == 1);
 }
@@ -212,7 +226,8 @@
 sti_bmove(struct sti_struct *sti, int src_y, int src_x,
 	  int dst_y, int dst_x, int height, int width)
 {
-	struct sti_blkmv_inptr inptr = {
+	struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
+	struct sti_blkmv_inptr inptr_default = {
 		.src_x		= src_x * sti->font_width,
 		.src_y		= src_y * sti->font_height,
 		.dest_x		= dst_x * sti->font_width,
@@ -220,14 +235,15 @@
 		.width		= width * sti->font_width,
 		.height		= height* sti->font_height,
 	};
-	struct sti_blkmv_outptr outptr = { 0, };
+	struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
 	s32 ret;
 	unsigned long flags;
 
 	do {
 		spin_lock_irqsave(&sti->lock, flags);
-		ret = STI_CALL(sti->block_move, &default_blkmv_flags,
-			&inptr, &outptr, sti->glob_cfg);
+		*inptr = inptr_default;
+		ret = sti_call(sti, sti->block_move, &default_blkmv_flags,
+			inptr, outptr, sti->glob_cfg);
 		spin_unlock_irqrestore(&sti->lock, flags);
 	} while (ret == 1);
 }
@@ -284,7 +300,7 @@
 
 
 
-static char *font_name[MAX_STI_ROMS] = { "VGA8x16", };
+static char *font_name[MAX_STI_ROMS];
 static int font_index[MAX_STI_ROMS],
 	   font_height[MAX_STI_ROMS],
 	   font_width[MAX_STI_ROMS];
@@ -389,10 +405,10 @@
 		"%d used bits\n"
 		"%d planes\n"
 		"attributes %08x\n",
-		 sti->outptr.bits_per_pixel,
-		 sti->outptr.bits_used,
-		 sti->outptr.planes,
-		 sti->outptr.attributes));
+		 sti->sti_data->inq_outptr.bits_per_pixel,
+		 sti->sti_data->inq_outptr.bits_used,
+		 sti->sti_data->inq_outptr.planes,
+		 sti->sti_data->inq_outptr.attributes));
 }
 
 static int sti_init_glob_cfg(struct sti_struct *sti, unsigned long rom_address,
@@ -402,24 +418,21 @@
 	struct sti_glob_cfg_ext *glob_cfg_ext;
 	void *save_addr;
 	void *sti_mem_addr;
-	const int save_addr_size = 1024;	/* XXX */
-	int i;
+	int i, size;
 
-	if (!sti->sti_mem_request)
+	if (sti->sti_mem_request < 256)
 		sti->sti_mem_request = 256; /* STI default */
 
-	glob_cfg = kzalloc(sizeof(*sti->glob_cfg), GFP_KERNEL);
-	glob_cfg_ext = kzalloc(sizeof(*glob_cfg_ext), GFP_KERNEL);
-	save_addr = kzalloc(save_addr_size, GFP_KERNEL);
-	sti_mem_addr = kzalloc(sti->sti_mem_request, GFP_KERNEL);
+	size = sizeof(struct sti_all_data) + sti->sti_mem_request - 256;
 
-	if (!(glob_cfg && glob_cfg_ext && save_addr && sti_mem_addr)) {
-		kfree(glob_cfg);
-		kfree(glob_cfg_ext);
-		kfree(save_addr);
-		kfree(sti_mem_addr);
+	sti->sti_data = kzalloc(size, STI_LOWMEM);
+	if (!sti->sti_data)
 		return -ENOMEM;
-	}
+
+	glob_cfg	= &sti->sti_data->glob_cfg;
+	glob_cfg_ext	= &sti->sti_data->glob_cfg_ext;
+	save_addr	= &sti->sti_data->save_addr;
+	sti_mem_addr	= &sti->sti_data->sti_mem_addr;
 
 	glob_cfg->ext_ptr = STI_PTR(glob_cfg_ext);
 	glob_cfg->save_addr = STI_PTR(save_addr);
@@ -475,32 +488,31 @@
 	return 0;
 }
 
-#ifdef CONFIG_FB
+#ifdef CONFIG_FONTS
 static struct sti_cooked_font *
 sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 {
-	const struct font_desc *fbfont;
+	const struct font_desc *fbfont = NULL;
 	unsigned int size, bpc;
 	void *dest;
 	struct sti_rom_font *nf;
 	struct sti_cooked_font *cooked_font;
 	
-	if (!fbfont_name || !strlen(fbfont_name))
-		return NULL;
-	fbfont = find_font(fbfont_name);
+	if (fbfont_name && strlen(fbfont_name))
+		fbfont = find_font(fbfont_name);
 	if (!fbfont)
 		fbfont = get_default_font(1024,768, ~(u32)0, ~(u32)0);
 	if (!fbfont)
 		return NULL;
 
-	DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n",
-			fbfont->width, fbfont->height, fbfont->name));
+	pr_info("STI selected %dx%d framebuffer font %s for sticon\n",
+			fbfont->width, fbfont->height, fbfont->name);
 			
 	bpc = ((fbfont->width+7)/8) * fbfont->height; 
 	size = bpc * 256;
 	size += sizeof(struct sti_rom_font);
 
-	nf = kzalloc(size, GFP_KERNEL);
+	nf = kzalloc(size, STI_LOWMEM);
 	if (!nf)
 		return NULL;
 
@@ -637,7 +649,7 @@
 	unsigned char *n, *p, *q;
 	int size = f->raw->bytes_per_char*256+sizeof(struct sti_rom_font);
 	
-	n = kzalloc (4*size, GFP_KERNEL);
+	n = kzalloc(4*size, STI_LOWMEM);
 	if (!n)
 		return NULL;
 	p = n + 3;
@@ -673,7 +685,7 @@
 	sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size);
 
 	size = (size+3) / 4;
-	raw = kmalloc(size, GFP_KERNEL);
+	raw = kmalloc(size, STI_LOWMEM);
 	if (raw) {
 		sti_bmode_rom_copy(address, size, raw);
 		memmove (&raw->res004, &raw->type[0], 0x3c);
@@ -707,7 +719,7 @@
 	/* read the ROM size directly from the struct in ROM */ 
 	size = gsc_readl(address + offsetof(struct sti_rom,last_addr));
 
-	raw = kmalloc(size, GFP_KERNEL);
+	raw = kmalloc(size, STI_LOWMEM);
 	if (raw)
 		sti_rom_copy(address, size, raw);
 
@@ -743,6 +755,10 @@
 
 	address = (unsigned long) STI_PTR(raw);
 
+	pr_info("STI ROM supports 32 %sbit firmware functions.\n",
+		raw->alt_code_type == ALT_CODE_TYPE_PA_RISC_64
+		? "and 64 " : "");
+
 	sti->font_unpmv = address + (raw->font_unpmv & 0x03ffffff);
 	sti->block_move = address + (raw->block_move & 0x03ffffff);
 	sti->init_graph = address + (raw->init_graph & 0x03ffffff);
@@ -901,7 +917,8 @@
 	sti_dump_globcfg(sti->glob_cfg, sti->sti_mem_request);
 	sti_dump_outptr(sti);
 	
-	printk(KERN_INFO "    graphics card name: %s\n", sti->outptr.dev_name );
+	pr_info("    graphics card name: %s\n",
+		sti->sti_data->inq_outptr.dev_name);
 
 	sti_roms[num_sti_roms] = sti;
 	num_sti_roms++;
@@ -1073,6 +1090,29 @@
 }
 EXPORT_SYMBOL(sti_get_rom);
 
+
+int sti_call(const struct sti_struct *sti, unsigned long func,
+		const void *flags, void *inptr, void *outptr,
+		struct sti_glob_cfg *glob_cfg)
+{
+	unsigned long _flags = STI_PTR(flags);
+	unsigned long _inptr = STI_PTR(inptr);
+	unsigned long _outptr = STI_PTR(outptr);
+	unsigned long _glob_cfg = STI_PTR(glob_cfg);
+	int ret;
+
+#ifdef CONFIG_64BIT
+	/* Check for overflow when using 32bit STI on 64bit kernel. */
+	if (WARN_ONCE(_flags>>32 || _inptr>>32 || _outptr>>32 || _glob_cfg>>32,
+			"Out of 32bit-range pointers!"))
+		return -1;
+#endif
+
+	ret = pdc_sti_call(func, _flags, _inptr, _outptr, _glob_cfg);
+
+	return ret;
+}
+
 MODULE_AUTHOR("Philipp Rumpf, Helge Deller, Thomas Bogendoerfer");
 MODULE_DESCRIPTION("Core STI driver for HP's NGLE series graphics cards in HP PARISC machines");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 5788678..1c446bc 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1641,67 +1641,6 @@
 	cyber2000fb_set_par(&cfb->fb);
 }
 
-#ifdef CONFIG_ARCH_SHARK
-
-#include <mach/framebuffer.h>
-
-static int cyberpro_vl_probe(void)
-{
-	struct cfb_info *cfb;
-	int err = -ENOMEM;
-
-	if (!request_mem_region(FB_START, FB_SIZE, "CyberPro2010"))
-		return err;
-
-	cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
-	if (!cfb)
-		goto failed_release;
-
-	cfb->irq = -1;
-	cfb->region = ioremap(FB_START, FB_SIZE);
-	if (!cfb->region)
-		goto failed_ioremap;
-
-	cfb->regs = cfb->region + MMIO_OFFSET;
-	cfb->fb.device = NULL;
-	cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
-	cfb->fb.fix.smem_start = FB_START;
-
-	/*
-	 * Bring up the hardware.  This is expected to enable access
-	 * to the linear memory region, and allow access to the memory
-	 * mapped registers.  Also, mem_ctl1 and mem_ctl2 must be
-	 * initialised.
-	 */
-	cyber2000fb_writeb(0x18, 0x46e8, cfb);
-	cyber2000fb_writeb(0x01, 0x102, cfb);
-	cyber2000fb_writeb(0x08, 0x46e8, cfb);
-	cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
-	cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
-
-	cfb->mclk_mult = 0xdb;
-	cfb->mclk_div  = 0x54;
-
-	err = cyberpro_common_probe(cfb);
-	if (err)
-		goto failed;
-
-	if (int_cfb_info == NULL)
-		int_cfb_info = cfb;
-
-	return 0;
-
-failed:
-	iounmap(cfb->region);
-failed_ioremap:
-	cyberpro_free_fb_info(cfb);
-failed_release:
-	release_mem_region(FB_START, FB_SIZE);
-
-	return err;
-}
-#endif /* CONFIG_ARCH_SHARK */
-
 /*
  * PCI specific support.
  */
@@ -1948,28 +1887,19 @@
 	cyber2000fb_setup(option);
 #endif
 
-#ifdef CONFIG_ARCH_SHARK
-	err = cyberpro_vl_probe();
-	if (!err)
-		ret = 0;
-#endif
-#ifdef CONFIG_PCI
 	err = pci_register_driver(&cyberpro_driver);
 	if (!err)
 		ret = 0;
-#endif
 
 	return ret ? err : 0;
 }
 module_init(cyber2000fb_init);
 
-#ifndef CONFIG_ARCH_SHARK
 static void __exit cyberpro_exit(void)
 {
 	pci_unregister_driver(&cyberpro_driver);
 }
 module_exit(cyberpro_exit);
-#endif
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
index 1b035b2e..1129d0e 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/exynos/Kconfig
@@ -16,6 +16,7 @@
 config EXYNOS_MIPI_DSI
 	bool "EXYNOS MIPI DSI driver support."
 	depends on ARCH_S5PV210 || ARCH_EXYNOS
+	select GENERIC_PHY
 	help
 	  This enables support for MIPI-DSI device.
 
@@ -29,7 +30,7 @@
 
 config EXYNOS_DP
 	bool "EXYNOS DP driver support"
-	depends on ARCH_EXYNOS
+	depends on OF && ARCH_EXYNOS
 	default n
 	help
 	  This enables support for DP device.
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 12bbede..5e1a715 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,8 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
-
-#include <video/exynos_dp.h>
+#include <linux/phy/phy.h>
 
 #include "exynos_dp_core.h"
 
@@ -894,26 +893,17 @@
 		dev_err(dp->dev, "unable to config video\n");
 }
 
-#ifdef CONFIG_OF
-static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
+static struct video_info *exynos_dp_dt_parse_pdata(struct device *dev)
 {
 	struct device_node *dp_node = dev->of_node;
-	struct exynos_dp_platdata *pd;
 	struct video_info *dp_video_config;
 
-	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
-	if (!pd) {
-		dev_err(dev, "memory allocation for pdata failed\n");
-		return ERR_PTR(-ENOMEM);
-	}
 	dp_video_config = devm_kzalloc(dev,
 				sizeof(*dp_video_config), GFP_KERNEL);
-
 	if (!dp_video_config) {
 		dev_err(dev, "memory allocation for video config failed\n");
 		return ERR_PTR(-ENOMEM);
 	}
-	pd->video_info = dp_video_config;
 
 	dp_video_config->h_sync_polarity =
 		of_property_read_bool(dp_node, "hsync-active-high");
@@ -960,7 +950,7 @@
 		return ERR_PTR(-EINVAL);
 	}
 
-	return pd;
+	return dp_video_config;
 }
 
 static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
@@ -971,8 +961,11 @@
 
 	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
 	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
+		dp->phy = devm_phy_get(dp->dev, "dp");
+		if (IS_ERR(dp->phy))
+			return PTR_ERR(dp->phy);
+		else
+			return 0;
 	}
 
 	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
@@ -1003,48 +996,34 @@
 
 static void exynos_dp_phy_init(struct exynos_dp_device *dp)
 {
-	u32 reg;
+	if (dp->phy) {
+		phy_power_on(dp->phy);
+	} else if (dp->phy_addr) {
+		u32 reg;
 
-	reg = __raw_readl(dp->phy_addr);
-	reg |= dp->enable_mask;
-	__raw_writel(reg, dp->phy_addr);
+		reg = __raw_readl(dp->phy_addr);
+		reg |= dp->enable_mask;
+		__raw_writel(reg, dp->phy_addr);
+	}
 }
 
 static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
 {
-	u32 reg;
+	if (dp->phy) {
+		phy_power_off(dp->phy);
+	} else if (dp->phy_addr) {
+		u32 reg;
 
-	reg = __raw_readl(dp->phy_addr);
-	reg &= ~(dp->enable_mask);
-	__raw_writel(reg, dp->phy_addr);
+		reg = __raw_readl(dp->phy_addr);
+		reg &= ~(dp->enable_mask);
+		__raw_writel(reg, dp->phy_addr);
+	}
 }
-#else
-static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
-{
-	return NULL;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	return -EINVAL;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	return;
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	return;
-}
-#endif /* CONFIG_OF */
 
 static int exynos_dp_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct exynos_dp_device *dp;
-	struct exynos_dp_platdata *pdata;
 
 	int ret = 0;
 
@@ -1057,21 +1036,13 @@
 
 	dp->dev = &pdev->dev;
 
-	if (pdev->dev.of_node) {
-		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
-		if (IS_ERR(pdata))
-			return PTR_ERR(pdata);
+	dp->video_info = exynos_dp_dt_parse_pdata(&pdev->dev);
+	if (IS_ERR(dp->video_info))
+		return PTR_ERR(dp->video_info);
 
-		ret = exynos_dp_dt_parse_phydata(dp);
-		if (ret)
-			return ret;
-	} else {
-		pdata = pdev->dev.platform_data;
-		if (!pdata) {
-			dev_err(&pdev->dev, "no platform data\n");
-			return -EINVAL;
-		}
-	}
+	ret = exynos_dp_dt_parse_phydata(dp);
+	if (ret)
+		return ret;
 
 	dp->clock = devm_clk_get(&pdev->dev, "dp");
 	if (IS_ERR(dp->clock)) {
@@ -1095,15 +1066,7 @@
 
 	INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
 
-	dp->video_info = pdata->video_info;
-
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	exynos_dp_phy_init(dp);
 
 	exynos_dp_init_dp(dp);
 
@@ -1121,18 +1084,11 @@
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
-	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
 	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
 
 	flush_work(&dp->hotplug_work);
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	exynos_dp_phy_exit(dp);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1143,20 +1099,13 @@
 #ifdef CONFIG_PM_SLEEP
 static int exynos_dp_suspend(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
 	disable_irq(dp->irq);
 
 	flush_work(&dp->hotplug_work);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	exynos_dp_phy_exit(dp);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1165,16 +1114,9 @@
 
 static int exynos_dp_resume(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	exynos_dp_phy_init(dp);
 
 	clk_prepare_enable(dp->clock);
 
@@ -1203,7 +1145,7 @@
 		.name	= "exynos-dp",
 		.owner	= THIS_MODULE,
 		.pm	= &exynos_dp_pm_ops,
-		.of_match_table = of_match_ptr(exynos_dp_match),
+		.of_match_table = exynos_dp_match,
 	},
 };
 
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6c567bbf..607e36d 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -13,6 +13,99 @@
 #ifndef _EXYNOS_DP_CORE_H
 #define _EXYNOS_DP_CORE_H
 
+#define DP_TIMEOUT_LOOP_COUNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 5
+
+enum link_rate_type {
+	LINK_RATE_1_62GBPS = 0x06,
+	LINK_RATE_2_70GBPS = 0x0a
+};
+
+enum link_lane_count_type {
+	LANE_COUNT1 = 1,
+	LANE_COUNT2 = 2,
+	LANE_COUNT4 = 4
+};
+
+enum link_training_state {
+	START,
+	CLOCK_RECOVERY,
+	EQUALIZER_TRAINING,
+	FINISHED,
+	FAILED
+};
+
+enum voltage_swing_level {
+	VOLTAGE_LEVEL_0,
+	VOLTAGE_LEVEL_1,
+	VOLTAGE_LEVEL_2,
+	VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+	PRE_EMPHASIS_LEVEL_0,
+	PRE_EMPHASIS_LEVEL_1,
+	PRE_EMPHASIS_LEVEL_2,
+	PRE_EMPHASIS_LEVEL_3,
+};
+
+enum pattern_set {
+	PRBS7,
+	D10_2,
+	TRAINING_PTN1,
+	TRAINING_PTN2,
+	DP_NONE
+};
+
+enum color_space {
+	COLOR_RGB,
+	COLOR_YCBCR422,
+	COLOR_YCBCR444
+};
+
+enum color_depth {
+	COLOR_6,
+	COLOR_8,
+	COLOR_10,
+	COLOR_12
+};
+
+enum color_coefficient {
+	COLOR_YCBCR601,
+	COLOR_YCBCR709
+};
+
+enum dynamic_range {
+	VESA,
+	CEA
+};
+
+enum pll_status {
+	PLL_UNLOCKED,
+	PLL_LOCKED
+};
+
+enum clock_recovery_m_value_type {
+	CALCULATED_M,
+	REGISTER_M
+};
+
+enum video_timing_recognition_type {
+	VIDEO_TIMING_FROM_CAPTURE,
+	VIDEO_TIMING_FROM_REGISTER
+};
+
+enum analog_power_block {
+	AUX_BLOCK,
+	CH0_BLOCK,
+	CH1_BLOCK,
+	CH2_BLOCK,
+	CH3_BLOCK,
+	ANALOG_TOTAL,
+	POWER_ALL
+};
+
 enum dp_irq_type {
 	DP_IRQ_TYPE_HP_CABLE_IN,
 	DP_IRQ_TYPE_HP_CABLE_OUT,
@@ -20,6 +113,22 @@
 	DP_IRQ_TYPE_UNKNOWN,
 };
 
+struct video_info {
+	char *name;
+
+	bool h_sync_polarity;
+	bool v_sync_polarity;
+	bool interlaced;
+
+	enum color_space color_space;
+	enum dynamic_range dynamic_range;
+	enum color_coefficient ycbcr_coeff;
+	enum color_depth color_depth;
+
+	enum link_rate_type link_rate;
+	enum link_lane_count_type lane_count;
+};
+
 struct link_train {
 	int eq_loop;
 	int cr_loop[4];
@@ -42,6 +151,7 @@
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/exynos/exynos_dp_reg.c
index 29d9d03..b70da50 100644
--- a/drivers/video/exynos/exynos_dp_reg.c
+++ b/drivers/video/exynos/exynos_dp_reg.c
@@ -14,8 +14,6 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
-#include <video/exynos_dp.h>
-
 #include "exynos_dp_core.h"
 #include "exynos_dp_reg.h"
 
diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index 32e5406..00b3a52 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
 #include <linux/notifier.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
@@ -156,8 +157,7 @@
 		exynos_mipi_regulator_enable(dsim);
 
 		/* enable MIPI-DSI PHY. */
-		if (dsim->pd->phy_enable)
-			dsim->pd->phy_enable(pdev, true);
+		phy_power_on(dsim->phy);
 
 		clk_enable(dsim->clock);
 
@@ -373,6 +373,10 @@
 		return ret;
 	}
 
+	dsim->phy = devm_phy_get(&pdev->dev, "dsim");
+	if (IS_ERR(dsim->phy))
+		return PTR_ERR(dsim->phy);
+
 	dsim->clock = devm_clk_get(&pdev->dev, "dsim0");
 	if (IS_ERR(dsim->clock)) {
 		dev_err(&pdev->dev, "failed to get dsim clock source\n");
@@ -439,8 +443,7 @@
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	exynos_mipi_update_cfg(dsim);
 
@@ -504,9 +507,8 @@
 	if (client_drv && client_drv->suspend)
 		client_drv->suspend(client_dev);
 
-	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, false);
+	/* disable MIPI-DSI PHY. */
+	phy_power_off(dsim->phy);
 
 	clk_disable(dsim->clock);
 
@@ -536,8 +538,7 @@
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	clk_enable(dsim->clock);
 
diff --git a/drivers/video/sticore.h b/drivers/video/sticore.h
index addf7b6..af16195 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/sticore.h
@@ -18,6 +18,9 @@
 #define STI_FONT_HPROMAN8 1
 #define STI_FONT_KANA8 2
 
+#define ALT_CODE_TYPE_UNKNOWN 0x00	/* alt code type values */
+#define ALT_CODE_TYPE_PA_RISC_64 0x01
+
 /* The latency of the STI functions cannot really be reduced by setting
  * this to 0;  STI doesn't seem to be designed to allow calling a different
  * function (or the same function with different arguments) after a
@@ -40,14 +43,6 @@
 
 #define STI_PTR(p)	( virt_to_phys(p) )
 #define PTR_STI(p)	( phys_to_virt((unsigned long)p) )
-#define STI_CALL(func, flags, inptr, outptr, glob_cfg)	\
-       ({						\
-               pdc_sti_call( func, STI_PTR(flags),	\
-				   STI_PTR(inptr),	\
-				   STI_PTR(outptr),	\
-				   STI_PTR(glob_cfg));	\
-       })
-
 
 #define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x)
 #define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y)
@@ -56,6 +51,12 @@
 #define sti_font_x(sti) (PTR_STI(sti->font)->width)
 #define sti_font_y(sti) (PTR_STI(sti->font)->height)
 
+#ifdef CONFIG_64BIT
+#define STI_LOWMEM	(GFP_KERNEL | GFP_DMA)
+#else
+#define STI_LOWMEM	(GFP_KERNEL)
+#endif
+
 
 /* STI function configuration structs */
 
@@ -306,6 +307,34 @@
 };
 
 
+/* sti_all_data is an internal struct which needs to be allocated in
+ * low memory (< 4GB) if STI is used with 32bit STI on a 64bit kernel */
+
+struct sti_all_data {
+	struct sti_glob_cfg glob_cfg;
+	struct sti_glob_cfg_ext glob_cfg_ext;
+
+	struct sti_conf_inptr		inq_inptr;
+	struct sti_conf_outptr		inq_outptr; /* configuration */
+	struct sti_conf_outptr_ext	inq_outptr_ext;
+
+	struct sti_init_inptr_ext	init_inptr_ext;
+	struct sti_init_inptr		init_inptr;
+	struct sti_init_outptr		init_outptr;
+
+	struct sti_blkmv_inptr		blkmv_inptr;
+	struct sti_blkmv_outptr		blkmv_outptr;
+
+	struct sti_font_inptr		font_inptr;
+	struct sti_font_outptr		font_outptr;
+
+	/* leave as last entries */
+	unsigned long save_addr[1024 / sizeof(unsigned long)];
+	   /* min 256 bytes which is STI default, max sti->sti_mem_request */
+	unsigned long sti_mem_addr[256 / sizeof(unsigned long)];
+	/* do not add something below here ! */
+};
+
 /* internal generic STI struct */
 
 struct sti_struct {
@@ -330,11 +359,9 @@
 	region_t regions[STI_REGION_MAX];
 	unsigned long regions_phys[STI_REGION_MAX];
 
-	struct sti_glob_cfg *glob_cfg;
-	struct sti_cooked_font *font;	/* ptr to selected font (cooked) */
+	struct sti_glob_cfg *glob_cfg;	/* points into sti_all_data */
 
-	struct sti_conf_outptr outptr; /* configuration */
-	struct sti_conf_outptr_ext outptr_ext;
+	struct sti_cooked_font *font;	/* ptr to selected font (cooked) */
 
 	struct pci_dev *pd;
 
@@ -343,6 +370,9 @@
 
 	/* pointer to the fb_info where this STI device is used */
 	struct fb_info *info;
+
+	/* pointer to all internal data */
+	struct sti_all_data *sti_data;
 };
 
 
@@ -350,6 +380,14 @@
 
 struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */
 
+
+/* sticore main function to call STI firmware */
+
+int sti_call(const struct sti_struct *sti, unsigned long func,
+		const void *flags, void *inptr, void *outptr,
+		struct sti_glob_cfg *glob_cfg);
+
+
 /* functions to call the STI ROM directly */
 
 void sti_putc(struct sti_struct *sti, int c, int y, int x);
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 876648e..019a1fe 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1101,6 +1101,7 @@
 	var = &info->var;
 
 	fb->sti = sti;
+	dev_name = sti->sti_data->inq_outptr.dev_name;
 	/* store upper 32bits of the graphics id */
 	fb->id = fb->sti->graphics_id[0];
 
@@ -1114,11 +1115,11 @@
 		  Since this driver only supports standard mode, we check
 		  if the device name contains the string "DX" and tell the
 		  user how to reconfigure the card. */
-		if (strstr(sti->outptr.dev_name, "DX")) {
+		if (strstr(dev_name, "DX")) {
 		   printk(KERN_WARNING
 "WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
 "WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
-			sti->outptr.dev_name);
+			dev_name);
 		   goto out_err0;
 		}
 		/* fall though */
@@ -1130,7 +1131,7 @@
 		break;
 	default:
 		printk(KERN_WARNING "stifb: '%s' (id: 0x%08x) not supported.\n",
-			sti->outptr.dev_name, fb->id);
+			dev_name, fb->id);
 		goto out_err0;
 	}
 	
@@ -1154,7 +1155,6 @@
 		fb->id = S9000_ID_A1659A;
 		break;
 	case S9000_ID_TIMBER:	/* HP9000/710 Any (may be a grayscale device) */
-		dev_name = fb->sti->outptr.dev_name;
 		if (strstr(dev_name, "GRAYSCALE") || 
 		    strstr(dev_name, "Grayscale") ||
 		    strstr(dev_name, "grayscale"))
@@ -1290,7 +1290,7 @@
 		var->xres, 
 		var->yres,
 		var->bits_per_pixel,
-		sti->outptr.dev_name,
+		dev_name,
 		fb->id, 
 		fix->mmio_start);
 
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index ee59b74..fed0ce1 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -13,18 +13,24 @@
 	struct virtio_device *dev = dev_to_virtio(_d);
 	return sprintf(buf, "0x%04x\n", dev->id.device);
 }
+static DEVICE_ATTR_RO(device);
+
 static ssize_t vendor_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = dev_to_virtio(_d);
 	return sprintf(buf, "0x%04x\n", dev->id.vendor);
 }
+static DEVICE_ATTR_RO(vendor);
+
 static ssize_t status_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = dev_to_virtio(_d);
 	return sprintf(buf, "0x%08x\n", dev->config->get_status(dev));
 }
+static DEVICE_ATTR_RO(status);
+
 static ssize_t modalias_show(struct device *_d,
 			     struct device_attribute *attr, char *buf)
 {
@@ -32,6 +38,8 @@
 	return sprintf(buf, "virtio:d%08Xv%08X\n",
 		       dev->id.device, dev->id.vendor);
 }
+static DEVICE_ATTR_RO(modalias);
+
 static ssize_t features_show(struct device *_d,
 			     struct device_attribute *attr, char *buf)
 {
@@ -47,14 +55,17 @@
 	len += sprintf(buf+len, "\n");
 	return len;
 }
-static struct device_attribute virtio_dev_attrs[] = {
-	__ATTR_RO(device),
-	__ATTR_RO(vendor),
-	__ATTR_RO(status),
-	__ATTR_RO(modalias),
-	__ATTR_RO(features),
-	__ATTR_NULL
+static DEVICE_ATTR_RO(features);
+
+static struct attribute *virtio_dev_attrs[] = {
+	&dev_attr_device.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_status.attr,
+	&dev_attr_modalias.attr,
+	&dev_attr_features.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(virtio_dev);
 
 static inline int virtio_id_match(const struct virtio_device *dev,
 				  const struct virtio_device_id *id)
@@ -165,7 +176,7 @@
 static struct bus_type virtio_bus = {
 	.name  = "virtio",
 	.match = virtio_dev_match,
-	.dev_attrs = virtio_dev_attrs,
+	.dev_groups = virtio_dev_groups,
 	.uevent = virtio_uevent,
 	.probe = virtio_dev_probe,
 	.remove = virtio_dev_remove,
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index 96cab6a..41613f9 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -498,7 +498,7 @@
 		irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_FALLING);
 
 	ret = devm_request_irq(&pdev->dev, ds1wm_data->irq, ds1wm_isr,
-			IRQF_DISABLED | IRQF_SHARED, "ds1wm", ds1wm_data);
+			IRQF_SHARED, "ds1wm", ds1wm_data);
 	if (ret)
 		return ret;
 
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 6e94d8dd..9900e8e 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -577,8 +577,7 @@
 		goto err_irq;
 	}
 
-	ret = devm_request_irq(dev, irq, hdq_isr, IRQF_DISABLED,
-			"omap_hdq", hdq_data);
+	ret = devm_request_irq(dev, irq, hdq_isr, 0, "omap_hdq", hdq_data);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "could not request irq\n");
 		goto err_irq;
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index f54ece2..264ad1c 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -58,6 +58,7 @@
 {
 	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
 	struct device_node *np = pdev->dev.of_node;
+	int gpio;
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -66,7 +67,11 @@
 	if (of_get_property(np, "linux,open-drain", NULL))
 		pdata->is_open_drain = 1;
 
-	pdata->pin = of_get_gpio(np, 0);
+	gpio = of_get_gpio(np, 0);
+	if (gpio < 0)
+		return gpio;
+	pdata->pin = gpio;
+
 	pdata->ext_pullup_enable_pin = of_get_gpio(np, 1);
 	pdev->dev.platform_data = pdata;
 
@@ -94,25 +99,27 @@
 		return -ENXIO;
 	}
 
-	master = kzalloc(sizeof(struct w1_bus_master), GFP_KERNEL);
+	master = devm_kzalloc(&pdev->dev, sizeof(struct w1_bus_master),
+			GFP_KERNEL);
 	if (!master) {
 		dev_err(&pdev->dev, "Out of memory\n");
 		return -ENOMEM;
 	}
 
-	err = gpio_request(pdata->pin, "w1");
+	err = devm_gpio_request(&pdev->dev, pdata->pin, "w1");
 	if (err) {
 		dev_err(&pdev->dev, "gpio_request (pin) failed\n");
-		goto free_master;
+		return err;
 	}
 
 	if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
-		err = gpio_request_one(pdata->ext_pullup_enable_pin,
-				       GPIOF_INIT_LOW, "w1 pullup");
+		err = devm_gpio_request_one(&pdev->dev,
+				pdata->ext_pullup_enable_pin, GPIOF_INIT_LOW,
+				"w1 pullup");
 		if (err < 0) {
 			dev_err(&pdev->dev, "gpio_request_one "
 					"(ext_pullup_enable_pin) failed\n");
-			goto free_gpio;
+			return err;
 		}
 	}
 
@@ -130,7 +137,7 @@
 	err = w1_add_master_device(master);
 	if (err) {
 		dev_err(&pdev->dev, "w1_add_master device failed\n");
-		goto free_gpio_ext_pu;
+		return err;
 	}
 
 	if (pdata->enable_external_pullup)
@@ -142,16 +149,6 @@
 	platform_set_drvdata(pdev, master);
 
 	return 0;
-
- free_gpio_ext_pu:
-	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
-		gpio_free(pdata->ext_pullup_enable_pin);
- free_gpio:
-	gpio_free(pdata->pin);
- free_master:
-	kfree(master);
-
-	return err;
 }
 
 static int w1_gpio_remove(struct platform_device *pdev)
@@ -166,8 +163,6 @@
 		gpio_set_value(pdata->ext_pullup_enable_pin, 0);
 
 	w1_remove_master_device(master);
-	gpio_free(pdata->pin);
-	kfree(master);
 
 	return 0;
 }
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 38e92b7..3c0a74b 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -384,12 +384,14 @@
 {
 	return sprintf(buf, "%s\n", to_xenbus_device(dev)->nodename);
 }
+static DEVICE_ATTR_RO(nodename);
 
 static ssize_t devtype_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%s\n", to_xenbus_device(dev)->devicetype);
 }
+static DEVICE_ATTR_RO(devtype);
 
 static ssize_t modalias_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
@@ -397,14 +399,24 @@
 	return sprintf(buf, "%s:%s\n", dev->bus->name,
 		       to_xenbus_device(dev)->devicetype);
 }
+static DEVICE_ATTR_RO(modalias);
 
-struct device_attribute xenbus_dev_attrs[] = {
-	__ATTR_RO(nodename),
-	__ATTR_RO(devtype),
-	__ATTR_RO(modalias),
-	__ATTR_NULL
+static struct attribute *xenbus_dev_attrs[] = {
+	&dev_attr_nodename.attr,
+	&dev_attr_devtype.attr,
+	&dev_attr_modalias.attr,
+	NULL,
 };
-EXPORT_SYMBOL_GPL(xenbus_dev_attrs);
+
+static const struct attribute_group xenbus_dev_group = {
+	.attrs = xenbus_dev_attrs,
+};
+
+const struct attribute_group *xenbus_dev_groups[] = {
+	&xenbus_dev_group,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(xenbus_dev_groups);
 
 int xenbus_probe_node(struct xen_bus_type *bus,
 		      const char *type,
diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h
index 146f857..1085ec2 100644
--- a/drivers/xen/xenbus/xenbus_probe.h
+++ b/drivers/xen/xenbus/xenbus_probe.h
@@ -54,7 +54,7 @@
 	XS_LOCAL,
 };
 
-extern struct device_attribute xenbus_dev_attrs[];
+extern const struct attribute_group *xenbus_dev_groups[];
 
 extern int xenbus_match(struct device *_dev, struct device_driver *_drv);
 extern int xenbus_dev_probe(struct device *_dev);
diff --git a/drivers/xen/xenbus/xenbus_probe_backend.c b/drivers/xen/xenbus/xenbus_probe_backend.c
index 998bbba..5125dce 100644
--- a/drivers/xen/xenbus/xenbus_probe_backend.c
+++ b/drivers/xen/xenbus/xenbus_probe_backend.c
@@ -200,7 +200,7 @@
 		.probe		= xenbus_dev_probe,
 		.remove		= xenbus_dev_remove,
 		.shutdown	= xenbus_dev_shutdown,
-		.dev_attrs	= xenbus_dev_attrs,
+		.dev_groups	= xenbus_dev_groups,
 	},
 };
 
diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c
index 34b20bf..129bf84 100644
--- a/drivers/xen/xenbus/xenbus_probe_frontend.c
+++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
@@ -154,7 +154,7 @@
 		.probe		= xenbus_frontend_dev_probe,
 		.remove		= xenbus_dev_remove,
 		.shutdown	= xenbus_dev_shutdown,
-		.dev_attrs	= xenbus_dev_attrs,
+		.dev_groups	= xenbus_dev_groups,
 
 		.pm		= &xenbus_pm_ops,
 	},
diff --git a/fs/9p/cache.c b/fs/9p/cache.c
index a9ea73d..2b7a032 100644
--- a/fs/9p/cache.c
+++ b/fs/9p/cache.c
@@ -90,7 +90,7 @@
 
 	v9ses->fscache = fscache_acquire_cookie(v9fs_cache_netfs.primary_index,
 						&v9fs_cache_session_index_def,
-						v9ses);
+						v9ses, true);
 	p9_debug(P9_DEBUG_FSC, "session %p get cookie %p\n",
 		 v9ses, v9ses->fscache);
 }
@@ -204,7 +204,7 @@
 	v9ses = v9fs_inode2v9ses(inode);
 	v9inode->fscache = fscache_acquire_cookie(v9ses->fscache,
 						  &v9fs_cache_inode_index_def,
-						  v9inode);
+						  v9inode, true);
 
 	p9_debug(P9_DEBUG_FSC, "inode %p get cookie %p\n",
 		 inode, v9inode->fscache);
@@ -271,7 +271,7 @@
 	v9ses = v9fs_inode2v9ses(inode);
 	v9inode->fscache = fscache_acquire_cookie(v9ses->fscache,
 						  &v9fs_cache_inode_index_def,
-						  v9inode);
+						  v9inode, true);
 	p9_debug(P9_DEBUG_FSC, "inode %p revalidating cookie old %p new %p\n",
 		 inode, old, v9inode->fscache);
 
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 3c090b7..ca0a3cf 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -179,7 +179,7 @@
 	/* put it up for caching (this never returns an error) */
 	cell->cache = fscache_acquire_cookie(afs_cache_netfs.primary_index,
 					     &afs_cell_cache_index_def,
-					     cell);
+					     cell, true);
 #endif
 
 	/* add to the cell lists */
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 789bc25..ce25d75 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -259,7 +259,7 @@
 #ifdef CONFIG_AFS_FSCACHE
 	vnode->cache = fscache_acquire_cookie(vnode->volume->cache,
 					      &afs_vnode_cache_index_def,
-					      vnode);
+					      vnode, true);
 #endif
 
 	ret = afs_inode_map_status(vnode, key);
diff --git a/fs/afs/vlocation.c b/fs/afs/vlocation.c
index 57bcb15..b6df2e8 100644
--- a/fs/afs/vlocation.c
+++ b/fs/afs/vlocation.c
@@ -308,7 +308,8 @@
 	/* see if we have an in-cache copy (will set vl->valid if there is) */
 #ifdef CONFIG_AFS_FSCACHE
 	vl->cache = fscache_acquire_cookie(vl->cell->cache,
-					   &afs_vlocation_cache_index_def, vl);
+					   &afs_vlocation_cache_index_def, vl,
+					   true);
 #endif
 
 	if (vl->valid) {
diff --git a/fs/afs/volume.c b/fs/afs/volume.c
index 401eeb2..2b60725 100644
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -131,7 +131,7 @@
 #ifdef CONFIG_AFS_FSCACHE
 	volume->cache = fscache_acquire_cookie(vlocation->cache,
 					       &afs_volume_cache_index_def,
-					       volume);
+					       volume, true);
 #endif
 	afs_get_vlocation(vlocation);
 	volume->vlocation = vlocation;
diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
index 43eb559..00baf14 100644
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -270,7 +270,7 @@
 #endif
 
 	/* delete retired objects */
-	if (test_bit(FSCACHE_COOKIE_RETIRED, &object->fscache.cookie->flags) &&
+	if (test_bit(FSCACHE_OBJECT_RETIRED, &object->fscache.flags) &&
 	    _object != cache->cache.fsdef
 	    ) {
 		_debug("- retire object OBJ%x", object->fscache.debug_id);
diff --git a/fs/ceph/cache.c b/fs/ceph/cache.c
index 6bfe65e..7db2e6c 100644
--- a/fs/ceph/cache.c
+++ b/fs/ceph/cache.c
@@ -68,7 +68,7 @@
 {
 	fsc->fscache = fscache_acquire_cookie(ceph_cache_netfs.primary_index,
 					      &ceph_fscache_fsid_object_def,
-					      fsc);
+					      fsc, true);
 
 	if (fsc->fscache == NULL) {
 		pr_err("Unable to resgister fsid: %p fscache cookie", fsc);
@@ -204,7 +204,7 @@
 
 	ci->fscache = fscache_acquire_cookie(fsc->fscache,
 					     &ceph_fscache_inode_object_def,
-					     ci);
+					     ci, true);
 done:
 	mutex_unlock(&inode->i_mutex);
 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 52b6f6c..26b1c1d 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -278,6 +278,8 @@
 	/* set attributes */
 	int (*set_file_info)(struct inode *, const char *, FILE_BASIC_INFO *,
 			     const unsigned int);
+	int (*set_compression)(const unsigned int, struct cifs_tcon *,
+			       struct cifsFileInfo *);
 	/* check if we can send an echo or nor */
 	bool (*can_echo)(struct TCP_Server_Info *);
 	/* send echo request */
@@ -620,11 +622,34 @@
 }
 
 static inline __u64
-get_next_mid(struct TCP_Server_Info *server)
+get_next_mid64(struct TCP_Server_Info *server)
 {
 	return server->ops->get_next_mid(server);
 }
 
+static inline __le16
+get_next_mid(struct TCP_Server_Info *server)
+{
+	__u16 mid = get_next_mid64(server);
+	/*
+	 * The value in the SMB header should be little endian for easy
+	 * on-the-wire decoding.
+	 */
+	return cpu_to_le16(mid);
+}
+
+static inline __u16
+get_mid(const struct smb_hdr *smb)
+{
+	return le16_to_cpu(smb->Mid);
+}
+
+static inline bool
+compare_mid(__u16 mid, const struct smb_hdr *smb)
+{
+	return mid == le16_to_cpu(smb->Mid);
+}
+
 /*
  * When the server supports very large reads and writes via POSIX extensions,
  * we can allow up to 2^24-1, minus the size of a READ/WRITE_AND_X header, not
@@ -828,6 +853,8 @@
 	__u32 maximal_access;
 	__u32 vol_serial_number;
 	__le64 vol_create_time;
+	__u32 ss_flags;		/* sector size flags */
+	__u32 perf_sector_size; /* best sector size for perf */
 #endif /* CONFIG_CIFS_SMB2 */
 #ifdef CONFIG_CIFS_FSCACHE
 	u64 resource_id;		/* server resource id */
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 08f9dfb..9e5ee34 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -428,7 +428,7 @@
 	__u16 Tid;
 	__le16 Pid;
 	__u16 Uid;
-	__u16 Mid;
+	__le16 Mid;
 	__u8 WordCount;
 } __attribute__((packed));
 
@@ -1352,6 +1352,35 @@
 	__u8 Data[1];
 } __attribute__((packed)) TRANSACT_IOCTL_REQ;
 
+typedef struct smb_com_transaction_compr_ioctl_req {
+	struct smb_hdr hdr;	/* wct = 23 */
+	__u8 MaxSetupCount;
+	__u16 Reserved;
+	__le32 TotalParameterCount;
+	__le32 TotalDataCount;
+	__le32 MaxParameterCount;
+	__le32 MaxDataCount;
+	__le32 ParameterCount;
+	__le32 ParameterOffset;
+	__le32 DataCount;
+	__le32 DataOffset;
+	__u8 SetupCount; /* four setup words follow subcommand */
+	/* SNIA spec incorrectly included spurious pad here */
+	__le16 SubCommand; /* 2 = IOCTL/FSCTL */
+	__le32 FunctionCode;
+	__u16 Fid;
+	__u8 IsFsctl;  /* 1 = File System Control 0 = device control (IOCTL) */
+	__u8 IsRootFlag; /* 1 = apply command to root of share (must be DFS) */
+	__le16 ByteCount;
+	__u8 Pad[3];
+	__le16 compression_state;  /* See below for valid flags */
+} __attribute__((packed)) TRANSACT_COMPR_IOCTL_REQ;
+
+/* compression state flags */
+#define COMPRESSION_FORMAT_NONE		0x0000
+#define COMPRESSION_FORMAT_DEFAULT	0x0001
+#define COMPRESSION_FORMAT_LZNT1	0x0002
+
 typedef struct smb_com_transaction_ioctl_rsp {
 	struct smb_hdr hdr;	/* wct = 19 */
 	__u8 Reserved[3];
@@ -2215,6 +2244,9 @@
 	__le32 DeviceCharacteristics;
 } __attribute__((packed)) FILE_SYSTEM_DEVICE_INFO; /* device info level 0x104 */
 
+/* minimum includes first three fields, and empty FS Name */
+#define MIN_FS_ATTR_INFO_SIZE 12
+
 typedef struct {
 	__le32 Attributes;
 	__le32 MaxPathNameComponentLength;
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index b5ec2a2..aa33976 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -360,6 +360,8 @@
 extern int CIFSSMBQuerySymLink(const unsigned int xid, struct cifs_tcon *tcon,
 			       __u16 fid, char **symlinkinfo,
 			       const struct nls_table *nls_codepage);
+extern int CIFSSMB_set_compression(const unsigned int xid,
+				   struct cifs_tcon *tcon, __u16 fid);
 extern int CIFSSMBOpen(const unsigned int xid, struct cifs_tcon *tcon,
 			const char *fileName, const int disposition,
 			const int access_flags, const int omode,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index ccd31ab..93b2947 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3199,6 +3199,60 @@
 	return rc;
 }
 
+int
+CIFSSMB_set_compression(const unsigned int xid, struct cifs_tcon *tcon,
+		    __u16 fid)
+{
+	int rc = 0;
+	int bytes_returned;
+	struct smb_com_transaction_compr_ioctl_req *pSMB;
+	struct smb_com_transaction_ioctl_rsp *pSMBr;
+
+	cifs_dbg(FYI, "Set compression for %u\n", fid);
+	rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB,
+		      (void **) &pSMBr);
+	if (rc)
+		return rc;
+
+	pSMB->compression_state = cpu_to_le16(COMPRESSION_FORMAT_DEFAULT);
+
+	pSMB->TotalParameterCount = 0;
+	pSMB->TotalDataCount = __constant_cpu_to_le32(2);
+	pSMB->MaxParameterCount = 0;
+	pSMB->MaxDataCount = 0;
+	pSMB->MaxSetupCount = 4;
+	pSMB->Reserved = 0;
+	pSMB->ParameterOffset = 0;
+	pSMB->DataCount = __constant_cpu_to_le32(2);
+	pSMB->DataOffset =
+		cpu_to_le32(offsetof(struct smb_com_transaction_compr_ioctl_req,
+				compression_state) - 4);  /* 84 */
+	pSMB->SetupCount = 4;
+	pSMB->SubCommand = __constant_cpu_to_le16(NT_TRANSACT_IOCTL);
+	pSMB->ParameterCount = 0;
+	pSMB->FunctionCode = __constant_cpu_to_le32(FSCTL_SET_COMPRESSION);
+	pSMB->IsFsctl = 1; /* FSCTL */
+	pSMB->IsRootFlag = 0;
+	pSMB->Fid = fid; /* file handle always le */
+	/* 3 byte pad, followed by 2 byte compress state */
+	pSMB->ByteCount = __constant_cpu_to_le16(5);
+	inc_rfc1001_len(pSMB, 5);
+
+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+	if (rc)
+		cifs_dbg(FYI, "Send error in SetCompression = %d\n", rc);
+
+	cifs_buf_release(pSMB);
+
+	/*
+	 * Note: On -EAGAIN error only caller can retry on handle based calls
+	 * since file handle passed in no longer valid.
+	 */
+	return rc;
+}
+
+
 #ifdef CONFIG_CIFS_POSIX
 
 /*Convert an Access Control Entry from wire format to local POSIX xattr format*/
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index a279ffc..62a5514 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2242,6 +2242,8 @@
 
 	spin_lock(&cifs_tcp_ses_lock);
 	list_for_each_entry(ses, &server->smb_ses_list, smb_ses_list) {
+		if (ses->status == CifsExiting)
+			continue;
 		if (!match_session(ses, vol))
 			continue;
 		++ses->ses_count;
@@ -2255,24 +2257,37 @@
 static void
 cifs_put_smb_ses(struct cifs_ses *ses)
 {
-	unsigned int xid;
+	unsigned int rc, xid;
 	struct TCP_Server_Info *server = ses->server;
 
 	cifs_dbg(FYI, "%s: ses_count=%d\n", __func__, ses->ses_count);
+
 	spin_lock(&cifs_tcp_ses_lock);
+	if (ses->status == CifsExiting) {
+		spin_unlock(&cifs_tcp_ses_lock);
+		return;
+	}
 	if (--ses->ses_count > 0) {
 		spin_unlock(&cifs_tcp_ses_lock);
 		return;
 	}
+	if (ses->status == CifsGood)
+		ses->status = CifsExiting;
+	spin_unlock(&cifs_tcp_ses_lock);
 
+	if (ses->status == CifsExiting && server->ops->logoff) {
+		xid = get_xid();
+		rc = server->ops->logoff(xid, ses);
+		if (rc)
+			cifs_dbg(VFS, "%s: Session Logoff failure rc=%d\n",
+				__func__, rc);
+		_free_xid(xid);
+	}
+
+	spin_lock(&cifs_tcp_ses_lock);
 	list_del_init(&ses->smb_ses_list);
 	spin_unlock(&cifs_tcp_ses_lock);
 
-	if (ses->status == CifsGood && server->ops->logoff) {
-		xid = get_xid();
-		server->ops->logoff(xid, ses);
-		_free_xid(xid);
-	}
 	sesInfoFree(ses);
 	cifs_put_tcp_session(server);
 }
diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c
index b3258f3..8d4b7bc 100644
--- a/fs/cifs/fscache.c
+++ b/fs/cifs/fscache.c
@@ -27,7 +27,7 @@
 {
 	server->fscache =
 		fscache_acquire_cookie(cifs_fscache_netfs.primary_index,
-				&cifs_fscache_server_index_def, server);
+				&cifs_fscache_server_index_def, server, true);
 	cifs_dbg(FYI, "%s: (0x%p/0x%p)\n",
 		 __func__, server, server->fscache);
 }
@@ -46,7 +46,7 @@
 
 	tcon->fscache =
 		fscache_acquire_cookie(server->fscache,
-				&cifs_fscache_super_index_def, tcon);
+				&cifs_fscache_super_index_def, tcon, true);
 	cifs_dbg(FYI, "%s: (0x%p/0x%p)\n",
 		 __func__, server->fscache, tcon->fscache);
 }
@@ -69,7 +69,7 @@
 
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
 		cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
-				&cifs_fscache_inode_object_def, cifsi);
+				&cifs_fscache_inode_object_def, cifsi, true);
 		cifs_dbg(FYI, "%s: got FH cookie (0x%p/0x%p)\n",
 			 __func__, tcon->fscache, cifsi->fscache);
 	}
@@ -119,7 +119,7 @@
 		cifsi->fscache = fscache_acquire_cookie(
 					cifs_sb_master_tcon(cifs_sb)->fscache,
 					&cifs_fscache_inode_object_def,
-					cifsi);
+					cifsi, true);
 		cifs_dbg(FYI, "%s: new cookie 0x%p oldcookie 0x%p\n",
 			 __func__, cifsi->fscache, old);
 	}
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 3e08455..ba54bf6 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -3,7 +3,7 @@
  *
  *   vfs operations that deal with io control
  *
- *   Copyright (C) International Business Machines  Corp., 2005,2007
+ *   Copyright (C) International Business Machines  Corp., 2005,2013
  *   Author(s): Steve French (sfrench@us.ibm.com)
  *
  *   This library is free software; you can redistribute it and/or modify
@@ -34,13 +34,10 @@
 	int rc = -ENOTTY; /* strange error - but the precedent */
 	unsigned int xid;
 	struct cifs_sb_info *cifs_sb;
-#ifdef CONFIG_CIFS_POSIX
 	struct cifsFileInfo *pSMBFile = filep->private_data;
 	struct cifs_tcon *tcon;
 	__u64	ExtAttrBits = 0;
-	__u64	ExtAttrMask = 0;
 	__u64   caps;
-#endif /* CONFIG_CIFS_POSIX */
 
 	xid = get_xid();
 
@@ -49,13 +46,14 @@
 	cifs_sb = CIFS_SB(inode->i_sb);
 
 	switch (command) {
-#ifdef CONFIG_CIFS_POSIX
 		case FS_IOC_GETFLAGS:
 			if (pSMBFile == NULL)
 				break;
 			tcon = tlink_tcon(pSMBFile->tlink);
 			caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
+#ifdef CONFIG_CIFS_POSIX
 			if (CIFS_UNIX_EXTATTR_CAP & caps) {
+				__u64	ExtAttrMask = 0;
 				rc = CIFSGetExtAttr(xid, tcon,
 						    pSMBFile->fid.netfid,
 						    &ExtAttrBits, &ExtAttrMask);
@@ -63,29 +61,50 @@
 					rc = put_user(ExtAttrBits &
 						FS_FL_USER_VISIBLE,
 						(int __user *)arg);
+				if (rc != EOPNOTSUPP)
+					break;
+			}
+#endif /* CONFIG_CIFS_POSIX */
+			rc = 0;
+			if (CIFS_I(inode)->cifsAttrs & ATTR_COMPRESSED) {
+				/* add in the compressed bit */
+				ExtAttrBits = FS_COMPR_FL;
+				rc = put_user(ExtAttrBits & FS_FL_USER_VISIBLE,
+					      (int __user *)arg);
 			}
 			break;
-
 		case FS_IOC_SETFLAGS:
 			if (pSMBFile == NULL)
 				break;
 			tcon = tlink_tcon(pSMBFile->tlink);
 			caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
-			if (CIFS_UNIX_EXTATTR_CAP & caps) {
-				if (get_user(ExtAttrBits, (int __user *)arg)) {
-					rc = -EFAULT;
-					break;
-				}
-				/*
-				 * rc = CIFSGetExtAttr(xid, tcon,
-				 *		       pSMBFile->fid.netfid,
-				 *		       extAttrBits,
-				 *		       &ExtAttrMask);
-				 */
+
+			if (get_user(ExtAttrBits, (int __user *)arg)) {
+				rc = -EFAULT;
+				break;
 			}
-			cifs_dbg(FYI, "set flags not implemented yet\n");
+
+			/*
+			 * if (CIFS_UNIX_EXTATTR_CAP & caps)
+			 *	rc = CIFSSetExtAttr(xid, tcon,
+			 *		       pSMBFile->fid.netfid,
+			 *		       extAttrBits,
+			 *		       &ExtAttrMask);
+			 * if (rc != EOPNOTSUPP)
+			 *	break;
+			 */
+
+			/* Currently only flag we can set is compressed flag */
+			if ((ExtAttrBits & FS_COMPR_FL) == 0)
+				break;
+
+			/* Try to set compress flag */
+			if (tcon->ses->server->ops->set_compression) {
+				rc = tcon->ses->server->ops->set_compression(
+							xid, tcon, pSMBFile);
+				cifs_dbg(FYI, "set compress flag rc %d\n", rc);
+			}
 			break;
-#endif /* CONFIG_CIFS_POSIX */
 		default:
 			cifs_dbg(FYI, "unsupported ioctl\n");
 			break;
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 138a011..2f9f379 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -278,7 +278,7 @@
 }
 
 static int
-check_smb_hdr(struct smb_hdr *smb, __u16 mid)
+check_smb_hdr(struct smb_hdr *smb)
 {
 	/* does it have the right SMB "signature" ? */
 	if (*(__le32 *) smb->Protocol != cpu_to_le32(0x424d53ff)) {
@@ -287,13 +287,6 @@
 		return 1;
 	}
 
-	/* Make sure that message ids match */
-	if (mid != smb->Mid) {
-		cifs_dbg(VFS, "Mids do not match. received=%u expected=%u\n",
-			 smb->Mid, mid);
-		return 1;
-	}
-
 	/* if it's a response then accept */
 	if (smb->Flags & SMBFLG_RESPONSE)
 		return 0;
@@ -302,7 +295,8 @@
 	if (smb->Command == SMB_COM_LOCKING_ANDX)
 		return 0;
 
-	cifs_dbg(VFS, "Server sent request, not response. mid=%u\n", smb->Mid);
+	cifs_dbg(VFS, "Server sent request, not response. mid=%u\n",
+		 get_mid(smb));
 	return 1;
 }
 
@@ -310,7 +304,6 @@
 checkSMB(char *buf, unsigned int total_read)
 {
 	struct smb_hdr *smb = (struct smb_hdr *)buf;
-	__u16 mid = smb->Mid;
 	__u32 rfclen = be32_to_cpu(smb->smb_buf_length);
 	__u32 clc_len;  /* calculated length */
 	cifs_dbg(FYI, "checkSMB Length: 0x%x, smb_buf_length: 0x%x\n",
@@ -348,7 +341,7 @@
 	}
 
 	/* otherwise, there is enough to get to the BCC */
-	if (check_smb_hdr(smb, mid))
+	if (check_smb_hdr(smb))
 		return -EIO;
 	clc_len = smbCalcSize(smb);
 
@@ -359,6 +352,7 @@
 	}
 
 	if (4 + rfclen != clc_len) {
+		__u16 mid = get_mid(smb);
 		/* check if bcc wrapped around for large read responses */
 		if ((rfclen > 64 * 1024) && (rfclen > clc_len)) {
 			/* check if lengths match mod 64K */
@@ -366,11 +360,11 @@
 				return 0; /* bcc wrapped */
 		}
 		cifs_dbg(FYI, "Calculated size %u vs length %u mismatch for mid=%u\n",
-			 clc_len, 4 + rfclen, smb->Mid);
+			 clc_len, 4 + rfclen, mid);
 
 		if (4 + rfclen < clc_len) {
 			cifs_dbg(VFS, "RFC1001 size %u smaller than SMB for mid=%u\n",
-				 rfclen, smb->Mid);
+				 rfclen, mid);
 			return -EIO;
 		} else if (rfclen > clc_len + 512) {
 			/*
@@ -383,7 +377,7 @@
 			 * data to 512 bytes.
 			 */
 			cifs_dbg(VFS, "RFC1001 size %u more than 512 bytes larger than SMB for mid=%u\n",
-				 rfclen, smb->Mid);
+				 rfclen, mid);
 			return -EIO;
 		}
 	}
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index 8233b17..384cffe 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -67,7 +67,7 @@
 	mutex_unlock(&server->srv_mutex);
 
 	cifs_dbg(FYI, "issued NT_CANCEL for mid %u, rc = %d\n",
-		 in_buf->Mid, rc);
+		 get_mid(in_buf), rc);
 
 	return rc;
 }
@@ -101,7 +101,7 @@
 
 	spin_lock(&GlobalMid_Lock);
 	list_for_each_entry(mid, &server->pending_mid_q, qhead) {
-		if (mid->mid == buf->Mid &&
+		if (compare_mid(mid->mid, buf) &&
 		    mid->mid_state == MID_REQUEST_SUBMITTED &&
 		    le16_to_cpu(mid->command) == buf->Command) {
 			spin_unlock(&GlobalMid_Lock);
@@ -807,6 +807,13 @@
 }
 
 static int
+cifs_set_compression(const unsigned int xid, struct cifs_tcon *tcon,
+		   struct cifsFileInfo *cfile)
+{
+	return CIFSSMB_set_compression(xid, tcon, cfile->fid.netfid);
+}
+
+static int
 cifs_query_dir_first(const unsigned int xid, struct cifs_tcon *tcon,
 		     const char *path, struct cifs_sb_info *cifs_sb,
 		     struct cifs_fid *fid, __u16 search_flags,
@@ -956,6 +963,7 @@
 	.set_path_size = CIFSSMBSetEOF,
 	.set_file_size = CIFSSMBSetFileSize,
 	.set_file_info = smb_set_file_info,
+	.set_compression = cifs_set_compression,
 	.echo = CIFSSMBEcho,
 	.mkdir = CIFSSMBMkDir,
 	.mkdir_setinfo = cifs_mkdir_setinfo,
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 861b332..c571be8 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -209,6 +209,94 @@
 	return rsize;
 }
 
+#ifdef CONFIG_CIFS_STATS2
+static int
+SMB3_request_interfaces(const unsigned int xid, struct cifs_tcon *tcon)
+{
+	int rc;
+	unsigned int ret_data_len = 0;
+	struct network_interface_info_ioctl_rsp *out_buf;
+
+	rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID,
+			FSCTL_QUERY_NETWORK_INTERFACE_INFO, true /* is_fsctl */,
+			NULL /* no data input */, 0 /* no data input */,
+			(char **)&out_buf, &ret_data_len);
+
+	if ((rc == 0)  && (ret_data_len > 0)) {
+		/* Dump info on first interface */
+		cifs_dbg(FYI, "Adapter Capability 0x%x\t",
+			le32_to_cpu(out_buf->Capability));
+		cifs_dbg(FYI, "Link Speed %lld\n",
+			le64_to_cpu(out_buf->LinkSpeed));
+	} else
+		cifs_dbg(VFS, "error %d on ioctl to get interface list\n", rc);
+
+	return rc;
+}
+#endif /* STATS2 */
+
+static void
+smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
+{
+	int rc;
+	__le16 srch_path = 0; /* Null - open root of share */
+	u8 oplock = SMB2_OPLOCK_LEVEL_NONE;
+	struct cifs_open_parms oparms;
+	struct cifs_fid fid;
+
+	oparms.tcon = tcon;
+	oparms.desired_access = FILE_READ_ATTRIBUTES;
+	oparms.disposition = FILE_OPEN;
+	oparms.create_options = 0;
+	oparms.fid = &fid;
+	oparms.reconnect = false;
+
+	rc = SMB2_open(xid, &oparms, &srch_path, &oplock, NULL, NULL);
+	if (rc)
+		return;
+
+#ifdef CONFIG_CIFS_STATS2
+	SMB3_request_interfaces(xid, tcon);
+#endif /* STATS2 */
+
+	SMB2_QFS_attr(xid, tcon, fid.persistent_fid, fid.volatile_fid,
+			FS_ATTRIBUTE_INFORMATION);
+	SMB2_QFS_attr(xid, tcon, fid.persistent_fid, fid.volatile_fid,
+			FS_DEVICE_INFORMATION);
+	SMB2_QFS_attr(xid, tcon, fid.persistent_fid, fid.volatile_fid,
+			FS_SECTOR_SIZE_INFORMATION); /* SMB3 specific */
+	SMB2_close(xid, tcon, fid.persistent_fid, fid.volatile_fid);
+	return;
+}
+
+static void
+smb2_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
+{
+	int rc;
+	__le16 srch_path = 0; /* Null - open root of share */
+	u8 oplock = SMB2_OPLOCK_LEVEL_NONE;
+	struct cifs_open_parms oparms;
+	struct cifs_fid fid;
+
+	oparms.tcon = tcon;
+	oparms.desired_access = FILE_READ_ATTRIBUTES;
+	oparms.disposition = FILE_OPEN;
+	oparms.create_options = 0;
+	oparms.fid = &fid;
+	oparms.reconnect = false;
+
+	rc = SMB2_open(xid, &oparms, &srch_path, &oplock, NULL, NULL);
+	if (rc)
+		return;
+
+	SMB2_QFS_attr(xid, tcon, fid.persistent_fid, fid.volatile_fid,
+			FS_ATTRIBUTE_INFORMATION);
+	SMB2_QFS_attr(xid, tcon, fid.persistent_fid, fid.volatile_fid,
+			FS_DEVICE_INFORMATION);
+	SMB2_close(xid, tcon, fid.persistent_fid, fid.volatile_fid);
+	return;
+}
+
 static int
 smb2_is_path_accessible(const unsigned int xid, struct cifs_tcon *tcon,
 			struct cifs_sb_info *cifs_sb, const char *full_path)
@@ -304,7 +392,19 @@
 		seq_puts(m, " ASYMMETRIC,");
 	if (tcon->capabilities == 0)
 		seq_puts(m, " None");
+	if (tcon->ss_flags & SSINFO_FLAGS_ALIGNED_DEVICE)
+		seq_puts(m, " Aligned,");
+	if (tcon->ss_flags & SSINFO_FLAGS_PARTITION_ALIGNED_ON_DEVICE)
+		seq_puts(m, " Partition Aligned,");
+	if (tcon->ss_flags & SSINFO_FLAGS_NO_SEEK_PENALTY)
+		seq_puts(m, " SSD,");
+	if (tcon->ss_flags & SSINFO_FLAGS_TRIM_ENABLED)
+		seq_puts(m, " TRIM-support,");
+
 	seq_printf(m, "\tShare Flags: 0x%x", tcon->share_flags);
+	if (tcon->perf_sector_size)
+		seq_printf(m, "\tOptimal sector size: 0x%x",
+			   tcon->perf_sector_size);
 }
 
 static void
@@ -446,6 +546,14 @@
 }
 
 static int
+smb2_set_compression(const unsigned int xid, struct cifs_tcon *tcon,
+		   struct cifsFileInfo *cfile)
+{
+	return SMB2_set_compression(xid, tcon, cfile->fid.persistent_fid,
+			    cfile->fid.volatile_fid);
+}
+
+static int
 smb2_query_dir_first(const unsigned int xid, struct cifs_tcon *tcon,
 		     const char *path, struct cifs_sb_info *cifs_sb,
 		     struct cifs_fid *fid, __u16 search_flags,
@@ -865,6 +973,7 @@
 	.logoff = SMB2_logoff,
 	.tree_connect = SMB2_tcon,
 	.tree_disconnect = SMB2_tdis,
+	.qfs_tcon = smb2_qfs_tcon,
 	.is_path_accessible = smb2_is_path_accessible,
 	.can_echo = smb2_can_echo,
 	.echo = SMB2_echo,
@@ -874,6 +983,7 @@
 	.set_path_size = smb2_set_path_size,
 	.set_file_size = smb2_set_file_size,
 	.set_file_info = smb2_set_file_info,
+	.set_compression = smb2_set_compression,
 	.mkdir = smb2_mkdir,
 	.mkdir_setinfo = smb2_mkdir_setinfo,
 	.rmdir = smb2_rmdir,
@@ -936,6 +1046,7 @@
 	.logoff = SMB2_logoff,
 	.tree_connect = SMB2_tcon,
 	.tree_disconnect = SMB2_tdis,
+	.qfs_tcon = smb2_qfs_tcon,
 	.is_path_accessible = smb2_is_path_accessible,
 	.can_echo = smb2_can_echo,
 	.echo = SMB2_echo,
@@ -945,6 +1056,7 @@
 	.set_path_size = smb2_set_path_size,
 	.set_file_size = smb2_set_file_size,
 	.set_file_info = smb2_set_file_info,
+	.set_compression = smb2_set_compression,
 	.mkdir = smb2_mkdir,
 	.mkdir_setinfo = smb2_mkdir_setinfo,
 	.rmdir = smb2_rmdir,
@@ -1008,6 +1120,7 @@
 	.logoff = SMB2_logoff,
 	.tree_connect = SMB2_tcon,
 	.tree_disconnect = SMB2_tdis,
+	.qfs_tcon = smb3_qfs_tcon,
 	.is_path_accessible = smb2_is_path_accessible,
 	.can_echo = smb2_can_echo,
 	.echo = SMB2_echo,
@@ -1017,6 +1130,7 @@
 	.set_path_size = smb2_set_path_size,
 	.set_file_size = smb2_set_file_size,
 	.set_file_info = smb2_set_file_info,
+	.set_compression = smb2_set_compression,
 	.mkdir = smb2_mkdir,
 	.mkdir_setinfo = smb2_mkdir_setinfo,
 	.rmdir = smb2_rmdir,
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index edccb52..8ab05b0 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1137,6 +1137,7 @@
 
 	cifs_dbg(FYI, "SMB2 IOCTL\n");
 
+	*out_data = NULL;
 	/* zero out returned data len, in case of error */
 	if (plen)
 		*plen = 0;
@@ -1182,11 +1183,23 @@
 		req->Flags = 0;
 
 	iov[0].iov_base = (char *)req;
-	/* 4 for rfc1002 length field */
-	iov[0].iov_len = get_rfc1002_length(req) + 4;
 
-	if (indatalen)
-		inc_rfc1001_len(req, indatalen);
+	/*
+	 * If no input data, the size of ioctl struct in
+	 * protocol spec still includes a 1 byte data buffer,
+	 * but if input data passed to ioctl, we do not
+	 * want to double count this, so we do not send
+	 * the dummy one byte of data in iovec[0] if sending
+	 * input data (in iovec[1]). We also must add 4 bytes
+	 * in first iovec to allow for rfc1002 length field.
+	 */
+
+	if (indatalen) {
+		iov[0].iov_len = get_rfc1002_length(req) + 4 - 1;
+		inc_rfc1001_len(req, indatalen - 1);
+	} else
+		iov[0].iov_len = get_rfc1002_length(req) + 4;
+
 
 	rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0);
 	rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base;
@@ -1234,6 +1247,33 @@
 	return rc;
 }
 
+/*
+ *   Individual callers to ioctl worker function follow
+ */
+
+int
+SMB2_set_compression(const unsigned int xid, struct cifs_tcon *tcon,
+		     u64 persistent_fid, u64 volatile_fid)
+{
+	int rc;
+	char *res_key = NULL;
+	struct  compress_ioctl fsctl_input;
+	char *ret_data = NULL;
+
+	fsctl_input.CompressionState =
+			__constant_cpu_to_le16(COMPRESSION_FORMAT_DEFAULT);
+
+	rc = SMB2_ioctl(xid, tcon, persistent_fid, volatile_fid,
+			FSCTL_SET_COMPRESSION, true /* is_fsctl */,
+			(char *)&fsctl_input /* data input */,
+			2 /* in data len */, &ret_data /* out data */, NULL);
+
+	cifs_dbg(FYI, "set compression rc %d\n", rc);
+	kfree(res_key);
+
+	return rc;
+}
+
 int
 SMB2_close(const unsigned int xid, struct cifs_tcon *tcon,
 	   u64 persistent_fid, u64 volatile_fid)
@@ -2299,7 +2339,7 @@
 	rc = SendReceive2(xid, ses, &iov, 1, &resp_buftype, 0);
 	if (rc) {
 		cifs_stats_fail_inc(tcon, SMB2_QUERY_INFO_HE);
-		goto qinf_exit;
+		goto qfsinf_exit;
 	}
 	rsp = (struct smb2_query_info_rsp *)iov.iov_base;
 
@@ -2311,7 +2351,70 @@
 	if (!rc)
 		copy_fs_info_to_kstatfs(info, fsdata);
 
-qinf_exit:
+qfsinf_exit:
+	free_rsp_buf(resp_buftype, iov.iov_base);
+	return rc;
+}
+
+int
+SMB2_QFS_attr(const unsigned int xid, struct cifs_tcon *tcon,
+	      u64 persistent_fid, u64 volatile_fid, int level)
+{
+	struct smb2_query_info_rsp *rsp = NULL;
+	struct kvec iov;
+	int rc = 0;
+	int resp_buftype, max_len, min_len;
+	struct cifs_ses *ses = tcon->ses;
+	unsigned int rsp_len, offset;
+
+	if (level == FS_DEVICE_INFORMATION) {
+		max_len = sizeof(FILE_SYSTEM_DEVICE_INFO);
+		min_len = sizeof(FILE_SYSTEM_DEVICE_INFO);
+	} else if (level == FS_ATTRIBUTE_INFORMATION) {
+		max_len = sizeof(FILE_SYSTEM_ATTRIBUTE_INFO);
+		min_len = MIN_FS_ATTR_INFO_SIZE;
+	} else if (level == FS_SECTOR_SIZE_INFORMATION) {
+		max_len = sizeof(struct smb3_fs_ss_info);
+		min_len = sizeof(struct smb3_fs_ss_info);
+	} else {
+		cifs_dbg(FYI, "Invalid qfsinfo level %d\n", level);
+		return -EINVAL;
+	}
+
+	rc = build_qfs_info_req(&iov, tcon, level, max_len,
+				persistent_fid, volatile_fid);
+	if (rc)
+		return rc;
+
+	rc = SendReceive2(xid, ses, &iov, 1, &resp_buftype, 0);
+	if (rc) {
+		cifs_stats_fail_inc(tcon, SMB2_QUERY_INFO_HE);
+		goto qfsattr_exit;
+	}
+	rsp = (struct smb2_query_info_rsp *)iov.iov_base;
+
+	rsp_len = le32_to_cpu(rsp->OutputBufferLength);
+	offset = le16_to_cpu(rsp->OutputBufferOffset);
+	rc = validate_buf(offset, rsp_len, &rsp->hdr, min_len);
+	if (rc)
+		goto qfsattr_exit;
+
+	if (level == FS_ATTRIBUTE_INFORMATION)
+		memcpy(&tcon->fsAttrInfo, 4 /* RFC1001 len */ + offset
+			+ (char *)&rsp->hdr, min_t(unsigned int,
+			rsp_len, max_len));
+	else if (level == FS_DEVICE_INFORMATION)
+		memcpy(&tcon->fsDevInfo, 4 /* RFC1001 len */ + offset
+			+ (char *)&rsp->hdr, sizeof(FILE_SYSTEM_DEVICE_INFO));
+	else if (level == FS_SECTOR_SIZE_INFORMATION) {
+		struct smb3_fs_ss_info *ss_info = (struct smb3_fs_ss_info *)
+			(4 /* RFC1001 len */ + offset + (char *)&rsp->hdr);
+		tcon->ss_flags = le32_to_cpu(ss_info->Flags);
+		tcon->perf_sector_size =
+			le32_to_cpu(ss_info->PhysicalBytesPerSectorForPerf);
+	}
+
+qfsattr_exit:
 	free_rsp_buf(resp_buftype, iov.iov_base);
 	return rc;
 }
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index b83d011..6183b1b 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -569,6 +569,10 @@
 
 #define NO_FILE_ID 0xFFFFFFFFFFFFFFFFULL /* general ioctls to srv not to file */
 
+struct compress_ioctl {
+	__le16 CompressionState; /* See cifspdu.h for possible flag values */
+} __packed;
+
 struct smb2_ioctl_req {
 	struct smb2_hdr hdr;
 	__le16 StructureSize;	/* Must be 57 */
@@ -584,7 +588,7 @@
 	__le32 MaxOutputResponse;
 	__le32 Flags;
 	__u32  Reserved2;
-	char   Buffer[0];
+	__u8   Buffer[0];
 } __packed;
 
 struct smb2_ioctl_rsp {
@@ -870,14 +874,16 @@
 
 /* File System Information Classes */
 #define FS_VOLUME_INFORMATION		1 /* Query */
-#define FS_LABEL_INFORMATION		2 /* Set */
+#define FS_LABEL_INFORMATION		2 /* Local only */
 #define FS_SIZE_INFORMATION		3 /* Query */
 #define FS_DEVICE_INFORMATION		4 /* Query */
 #define FS_ATTRIBUTE_INFORMATION	5 /* Query */
 #define FS_CONTROL_INFORMATION		6 /* Query, Set */
 #define FS_FULL_SIZE_INFORMATION	7 /* Query */
 #define FS_OBJECT_ID_INFORMATION	8 /* Query, Set */
-#define FS_DRIVER_PATH_INFORMATION	9 /* Query */
+#define FS_DRIVER_PATH_INFORMATION	9 /* Local only */
+#define FS_VOLUME_FLAGS_INFORMATION	10 /* Local only */
+#define FS_SECTOR_SIZE_INFORMATION	11 /* SMB3 or later. Query */
 
 struct smb2_fs_full_size_info {
 	__le64 TotalAllocationUnits;
@@ -887,6 +893,22 @@
 	__le32 BytesPerSector;
 } __packed;
 
+#define SSINFO_FLAGS_ALIGNED_DEVICE		0x00000001
+#define SSINFO_FLAGS_PARTITION_ALIGNED_ON_DEVICE 0x00000002
+#define SSINFO_FLAGS_NO_SEEK_PENALTY		0x00000004
+#define SSINFO_FLAGS_TRIM_ENABLED		0x00000008
+
+/* sector size info struct */
+struct smb3_fs_ss_info {
+	__le32 LogicalBytesPerSector;
+	__le32 PhysicalBytesPerSectorForAtomicity;
+	__le32 PhysicalBytesPerSectorForPerf;
+	__le32 FileSystemEffectivePhysicalBytesPerSectorForAtomicity;
+	__le32 Flags;
+	__le32 ByteOffsetForSectorAlignment;
+	__le32 ByteOffsetForPartitionAlignment;
+} __packed;
+
 /* partial list of QUERY INFO levels */
 #define FILE_DIRECTORY_INFORMATION	1
 #define FILE_FULL_DIRECTORY_INFORMATION 2
diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h
index e3fb480..313813e 100644
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -142,12 +142,16 @@
 extern int SMB2_set_info(const unsigned int xid, struct cifs_tcon *tcon,
 			 u64 persistent_fid, u64 volatile_fid,
 			 FILE_BASIC_INFO *buf);
+extern int SMB2_set_compression(const unsigned int xid, struct cifs_tcon *tcon,
+				u64 persistent_fid, u64 volatile_fid);
 extern int SMB2_oplock_break(const unsigned int xid, struct cifs_tcon *tcon,
 			     const u64 persistent_fid, const u64 volatile_fid,
 			     const __u8 oplock_level);
 extern int SMB2_QFS_info(const unsigned int xid, struct cifs_tcon *tcon,
 			 u64 persistent_file_id, u64 volatile_file_id,
 			 struct kstatfs *FSData);
+extern int SMB2_QFS_attr(const unsigned int xid, struct cifs_tcon *tcon,
+			 u64 persistent_file_id, u64 volatile_file_id, int lvl);
 extern int SMB2_lock(const unsigned int xid, struct cifs_tcon *tcon,
 		     const __u64 persist_fid, const __u64 volatile_fid,
 		     const __u32 pid, const __u64 length, const __u64 offset,
diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c
index 340abca..59c748c 100644
--- a/fs/cifs/smb2transport.c
+++ b/fs/cifs/smb2transport.c
@@ -466,7 +466,7 @@
 static inline void
 smb2_seq_num_into_buf(struct TCP_Server_Info *server, struct smb2_hdr *hdr)
 {
-	hdr->MessageId = get_next_mid(server);
+	hdr->MessageId = get_next_mid64(server);
 }
 
 static struct mid_q_entry *
@@ -516,13 +516,19 @@
 		return -EAGAIN;
 	}
 
-	if (ses->status != CifsGood) {
-		/* check if SMB2 session is bad because we are setting it up */
+	if (ses->status == CifsNew) {
 		if ((buf->Command != SMB2_SESSION_SETUP) &&
 		    (buf->Command != SMB2_NEGOTIATE))
 			return -EAGAIN;
 		/* else ok - we are setting up session */
 	}
+
+	if (ses->status == CifsExiting) {
+		if (buf->Command != SMB2_LOGOFF)
+			return -EAGAIN;
+		/* else ok - we are shutting down the session */
+	}
+
 	*mid = smb2_mid_entry_alloc(buf, ses->server);
 	if (*mid == NULL)
 		return -ENOMEM;
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 800b938..b375709 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -58,7 +58,7 @@
 		return temp;
 	else {
 		memset(temp, 0, sizeof(struct mid_q_entry));
-		temp->mid = smb_buffer->Mid;	/* always LE */
+		temp->mid = get_mid(smb_buffer);
 		temp->pid = current->pid;
 		temp->command = cpu_to_le16(smb_buffer->Command);
 		cifs_dbg(FYI, "For smb_command %d\n", smb_buffer->Command);
@@ -431,13 +431,20 @@
 		return -EAGAIN;
 	}
 
-	if (ses->status != CifsGood) {
-		/* check if SMB session is bad because we are setting it up */
+	if (ses->status == CifsNew) {
 		if ((in_buf->Command != SMB_COM_SESSION_SETUP_ANDX) &&
 			(in_buf->Command != SMB_COM_NEGOTIATE))
 			return -EAGAIN;
 		/* else ok - we are setting up session */
 	}
+
+	if (ses->status == CifsExiting) {
+		/* check if SMB session is bad because we are setting it up */
+		if (in_buf->Command != SMB_COM_LOGOFF_ANDX)
+			return -EAGAIN;
+		/* else ok - we are shutting down session */
+	}
+
 	*ppmidQ = AllocMidQEntry(in_buf, ses->server);
 	if (*ppmidQ == NULL)
 		return -ENOMEM;
diff --git a/fs/dcache.c b/fs/dcache.c
index 20532cb..ae6ebb8 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -542,7 +542,7 @@
  * If ref is non-zero, then decrement the refcount too.
  * Returns dentry requiring refcount drop, or NULL if we're done.
  */
-static inline struct dentry *
+static struct dentry *
 dentry_kill(struct dentry *dentry, int unlock_on_failure)
 	__releases(dentry->d_lock)
 {
@@ -630,7 +630,8 @@
 			goto kill_it;
 	}
 
-	dentry->d_flags |= DCACHE_REFERENCED;
+	if (!(dentry->d_flags & DCACHE_REFERENCED))
+		dentry->d_flags |= DCACHE_REFERENCED;
 	dentry_lru_add(dentry);
 
 	dentry->d_lockref.count--;
diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c
index b2a86e3..29d7feb 100644
--- a/fs/fscache/cookie.c
+++ b/fs/fscache/cookie.c
@@ -58,15 +58,16 @@
 struct fscache_cookie *__fscache_acquire_cookie(
 	struct fscache_cookie *parent,
 	const struct fscache_cookie_def *def,
-	void *netfs_data)
+	void *netfs_data,
+	bool enable)
 {
 	struct fscache_cookie *cookie;
 
 	BUG_ON(!def);
 
-	_enter("{%s},{%s},%p",
+	_enter("{%s},{%s},%p,%u",
 	       parent ? (char *) parent->def->name : "<no-parent>",
-	       def->name, netfs_data);
+	       def->name, netfs_data, enable);
 
 	fscache_stat(&fscache_n_acquires);
 
@@ -106,7 +107,7 @@
 	cookie->def		= def;
 	cookie->parent		= parent;
 	cookie->netfs_data	= netfs_data;
-	cookie->flags		= 0;
+	cookie->flags		= (1 << FSCACHE_COOKIE_NO_DATA_YET);
 
 	/* radix tree insertion won't use the preallocation pool unless it's
 	 * told it may not wait */
@@ -124,16 +125,22 @@
 		break;
 	}
 
-	/* if the object is an index then we need do nothing more here - we
-	 * create indices on disk when we need them as an index may exist in
-	 * multiple caches */
-	if (cookie->def->type != FSCACHE_COOKIE_TYPE_INDEX) {
-		if (fscache_acquire_non_index_cookie(cookie) < 0) {
-			atomic_dec(&parent->n_children);
-			__fscache_cookie_put(cookie);
-			fscache_stat(&fscache_n_acquires_nobufs);
-			_leave(" = NULL");
-			return NULL;
+	if (enable) {
+		/* if the object is an index then we need do nothing more here
+		 * - we create indices on disk when we need them as an index
+		 * may exist in multiple caches */
+		if (cookie->def->type != FSCACHE_COOKIE_TYPE_INDEX) {
+			if (fscache_acquire_non_index_cookie(cookie) == 0) {
+				set_bit(FSCACHE_COOKIE_ENABLED, &cookie->flags);
+			} else {
+				atomic_dec(&parent->n_children);
+				__fscache_cookie_put(cookie);
+				fscache_stat(&fscache_n_acquires_nobufs);
+				_leave(" = NULL");
+				return NULL;
+			}
+		} else {
+			set_bit(FSCACHE_COOKIE_ENABLED, &cookie->flags);
 		}
 	}
 
@@ -144,6 +151,39 @@
 EXPORT_SYMBOL(__fscache_acquire_cookie);
 
 /*
+ * Enable a cookie to permit it to accept new operations.
+ */
+void __fscache_enable_cookie(struct fscache_cookie *cookie,
+			     bool (*can_enable)(void *data),
+			     void *data)
+{
+	_enter("%p", cookie);
+
+	wait_on_bit_lock(&cookie->flags, FSCACHE_COOKIE_ENABLEMENT_LOCK,
+			 fscache_wait_bit, TASK_UNINTERRUPTIBLE);
+
+	if (test_bit(FSCACHE_COOKIE_ENABLED, &cookie->flags))
+		goto out_unlock;
+
+	if (can_enable && !can_enable(data)) {
+		/* The netfs decided it didn't want to enable after all */
+	} else if (cookie->def->type != FSCACHE_COOKIE_TYPE_INDEX) {
+		/* Wait for outstanding disablement to complete */
+		__fscache_wait_on_invalidate(cookie);
+
+		if (fscache_acquire_non_index_cookie(cookie) == 0)
+			set_bit(FSCACHE_COOKIE_ENABLED, &cookie->flags);
+	} else {
+		set_bit(FSCACHE_COOKIE_ENABLED, &cookie->flags);
+	}
+
+out_unlock:
+	clear_bit_unlock(FSCACHE_COOKIE_ENABLEMENT_LOCK, &cookie->flags);
+	wake_up_bit(&cookie->flags, FSCACHE_COOKIE_ENABLEMENT_LOCK);
+}
+EXPORT_SYMBOL(__fscache_enable_cookie);
+
+/*
  * acquire a non-index cookie
  * - this must make sure the index chain is instantiated and instantiate the
  *   object representation too
@@ -157,7 +197,7 @@
 
 	_enter("");
 
-	cookie->flags = 1 << FSCACHE_COOKIE_UNAVAILABLE;
+	set_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags);
 
 	/* now we need to see whether the backing objects for this cookie yet
 	 * exist, if not there'll be nothing to search */
@@ -180,9 +220,7 @@
 
 	_debug("cache %s", cache->tag->name);
 
-	cookie->flags =
-		(1 << FSCACHE_COOKIE_LOOKING_UP) |
-		(1 << FSCACHE_COOKIE_NO_DATA_YET);
+	set_bit(FSCACHE_COOKIE_LOOKING_UP, &cookie->flags);
 
 	/* ask the cache to allocate objects for this cookie and its parent
 	 * chain */
@@ -398,7 +436,8 @@
 	if (!hlist_empty(&cookie->backing_objects)) {
 		spin_lock(&cookie->lock);
 
-		if (!hlist_empty(&cookie->backing_objects) &&
+		if (fscache_cookie_enabled(cookie) &&
+		    !hlist_empty(&cookie->backing_objects) &&
 		    !test_and_set_bit(FSCACHE_COOKIE_INVALIDATING,
 				      &cookie->flags)) {
 			object = hlist_entry(cookie->backing_objects.first,
@@ -452,10 +491,14 @@
 
 	spin_lock(&cookie->lock);
 
-	/* update the index entry on disk in each cache backing this cookie */
-	hlist_for_each_entry(object,
-			     &cookie->backing_objects, cookie_link) {
-		fscache_raise_event(object, FSCACHE_OBJECT_EV_UPDATE);
+	if (fscache_cookie_enabled(cookie)) {
+		/* update the index entry on disk in each cache backing this
+		 * cookie.
+		 */
+		hlist_for_each_entry(object,
+				     &cookie->backing_objects, cookie_link) {
+			fscache_raise_event(object, FSCACHE_OBJECT_EV_UPDATE);
+		}
 	}
 
 	spin_unlock(&cookie->lock);
@@ -464,15 +507,80 @@
 EXPORT_SYMBOL(__fscache_update_cookie);
 
 /*
+ * Disable a cookie to stop it from accepting new requests from the netfs.
+ */
+void __fscache_disable_cookie(struct fscache_cookie *cookie, bool invalidate)
+{
+	struct fscache_object *object;
+	bool awaken = false;
+
+	_enter("%p,%u", cookie, invalidate);
+
+	ASSERTCMP(atomic_read(&cookie->n_active), >, 0);
+
+	if (atomic_read(&cookie->n_children) != 0) {
+		printk(KERN_ERR "FS-Cache: Cookie '%s' still has children\n",
+		       cookie->def->name);
+		BUG();
+	}
+
+	wait_on_bit_lock(&cookie->flags, FSCACHE_COOKIE_ENABLEMENT_LOCK,
+			 fscache_wait_bit, TASK_UNINTERRUPTIBLE);
+	if (!test_and_clear_bit(FSCACHE_COOKIE_ENABLED, &cookie->flags))
+		goto out_unlock_enable;
+
+	/* If the cookie is being invalidated, wait for that to complete first
+	 * so that we can reuse the flag.
+	 */
+	__fscache_wait_on_invalidate(cookie);
+
+	/* Dispose of the backing objects */
+	set_bit(FSCACHE_COOKIE_INVALIDATING, &cookie->flags);
+
+	spin_lock(&cookie->lock);
+	if (!hlist_empty(&cookie->backing_objects)) {
+		hlist_for_each_entry(object, &cookie->backing_objects, cookie_link) {
+			if (invalidate)
+				set_bit(FSCACHE_OBJECT_RETIRED, &object->flags);
+			fscache_raise_event(object, FSCACHE_OBJECT_EV_KILL);
+		}
+	} else {
+		if (test_and_clear_bit(FSCACHE_COOKIE_INVALIDATING, &cookie->flags))
+			awaken = true;
+	}
+	spin_unlock(&cookie->lock);
+	if (awaken)
+		wake_up_bit(&cookie->flags, FSCACHE_COOKIE_INVALIDATING);
+
+	/* Wait for cessation of activity requiring access to the netfs (when
+	 * n_active reaches 0).  This makes sure outstanding reads and writes
+	 * have completed.
+	 */
+	if (!atomic_dec_and_test(&cookie->n_active))
+		wait_on_atomic_t(&cookie->n_active, fscache_wait_atomic_t,
+				 TASK_UNINTERRUPTIBLE);
+
+	/* Reset the cookie state if it wasn't relinquished */
+	if (!test_bit(FSCACHE_COOKIE_RELINQUISHED, &cookie->flags)) {
+		atomic_inc(&cookie->n_active);
+		set_bit(FSCACHE_COOKIE_NO_DATA_YET, &cookie->flags);
+	}
+
+out_unlock_enable:
+	clear_bit_unlock(FSCACHE_COOKIE_ENABLEMENT_LOCK, &cookie->flags);
+	wake_up_bit(&cookie->flags, FSCACHE_COOKIE_ENABLEMENT_LOCK);
+	_leave("");
+}
+EXPORT_SYMBOL(__fscache_disable_cookie);
+
+/*
  * release a cookie back to the cache
  * - the object will be marked as recyclable on disk if retire is true
  * - all dependents of this cookie must have already been unregistered
  *   (indices/files/pages)
  */
-void __fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire)
+void __fscache_relinquish_cookie(struct fscache_cookie *cookie, bool retire)
 {
-	struct fscache_object *object;
-
 	fscache_stat(&fscache_n_relinquishes);
 	if (retire)
 		fscache_stat(&fscache_n_relinquishes_retire);
@@ -487,31 +595,10 @@
 	       cookie, cookie->def->name, cookie->netfs_data,
 	       atomic_read(&cookie->n_active), retire);
 
-	ASSERTCMP(atomic_read(&cookie->n_active), >, 0);
-
-	if (atomic_read(&cookie->n_children) != 0) {
-		printk(KERN_ERR "FS-Cache: Cookie '%s' still has children\n",
-		       cookie->def->name);
-		BUG();
-	}
-
 	/* No further netfs-accessing operations on this cookie permitted */
 	set_bit(FSCACHE_COOKIE_RELINQUISHED, &cookie->flags);
-	if (retire)
-		set_bit(FSCACHE_COOKIE_RETIRED, &cookie->flags);
 
-	spin_lock(&cookie->lock);
-	hlist_for_each_entry(object, &cookie->backing_objects, cookie_link) {
-		fscache_raise_event(object, FSCACHE_OBJECT_EV_KILL);
-	}
-	spin_unlock(&cookie->lock);
-
-	/* Wait for cessation of activity requiring access to the netfs (when
-	 * n_active reaches 0).
-	 */
-	if (!atomic_dec_and_test(&cookie->n_active))
-		wait_on_atomic_t(&cookie->n_active, fscache_wait_atomic_t,
-				 TASK_UNINTERRUPTIBLE);
+	__fscache_disable_cookie(cookie, retire);
 
 	/* Clear pointers back to the netfs */
 	cookie->netfs_data	= NULL;
@@ -568,6 +655,7 @@
 {
 	struct fscache_operation *op;
 	struct fscache_object *object;
+	bool wake_cookie = false;
 	int ret;
 
 	_enter("%p,", cookie);
@@ -591,7 +679,8 @@
 
 	spin_lock(&cookie->lock);
 
-	if (hlist_empty(&cookie->backing_objects))
+	if (!fscache_cookie_enabled(cookie) ||
+	    hlist_empty(&cookie->backing_objects))
 		goto inconsistent;
 	object = hlist_entry(cookie->backing_objects.first,
 			     struct fscache_object, cookie_link);
@@ -600,7 +689,7 @@
 
 	op->debug_id = atomic_inc_return(&fscache_op_debug_id);
 
-	atomic_inc(&cookie->n_active);
+	__fscache_use_cookie(cookie);
 	if (fscache_submit_op(object, op) < 0)
 		goto submit_failed;
 
@@ -622,9 +711,11 @@
 	return ret;
 
 submit_failed:
-	atomic_dec(&cookie->n_active);
+	wake_cookie = __fscache_unuse_cookie(cookie);
 inconsistent:
 	spin_unlock(&cookie->lock);
+	if (wake_cookie)
+		__fscache_wake_unused_cookie(cookie);
 	kfree(op);
 	_leave(" = -ESTALE");
 	return -ESTALE;
diff --git a/fs/fscache/fsdef.c b/fs/fscache/fsdef.c
index 10a2ade..5a117df 100644
--- a/fs/fscache/fsdef.c
+++ b/fs/fscache/fsdef.c
@@ -59,6 +59,7 @@
 	.lock		= __SPIN_LOCK_UNLOCKED(fscache_fsdef_index.lock),
 	.backing_objects = HLIST_HEAD_INIT,
 	.def		= &fscache_fsdef_index_def,
+	.flags		= 1 << FSCACHE_COOKIE_ENABLED,
 };
 EXPORT_SYMBOL(fscache_fsdef_index);
 
diff --git a/fs/fscache/netfs.c b/fs/fscache/netfs.c
index b1bb611..989f394 100644
--- a/fs/fscache/netfs.c
+++ b/fs/fscache/netfs.c
@@ -45,6 +45,7 @@
 	netfs->primary_index->def		= &fscache_fsdef_netfs_def;
 	netfs->primary_index->parent		= &fscache_fsdef_index;
 	netfs->primary_index->netfs_data	= netfs;
+	netfs->primary_index->flags		= 1 << FSCACHE_COOKIE_ENABLED;
 
 	atomic_inc(&netfs->primary_index->parent->usage);
 	atomic_inc(&netfs->primary_index->parent->n_children);
diff --git a/fs/fscache/object.c b/fs/fscache/object.c
index 86d75a6..dcb8216 100644
--- a/fs/fscache/object.c
+++ b/fs/fscache/object.c
@@ -495,6 +495,7 @@
 		 * returning ENODATA.
 		 */
 		set_bit(FSCACHE_COOKIE_NO_DATA_YET, &cookie->flags);
+		clear_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags);
 
 		_debug("wake up lookup %p", &cookie->flags);
 		clear_bit_unlock(FSCACHE_COOKIE_LOOKING_UP, &cookie->flags);
@@ -527,6 +528,7 @@
 
 		/* We do (presumably) have data */
 		clear_bit_unlock(FSCACHE_COOKIE_NO_DATA_YET, &cookie->flags);
+		clear_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags);
 
 		/* Allow write requests to begin stacking up and read requests
 		 * to begin shovelling data.
@@ -679,7 +681,8 @@
 	 */
 	spin_lock(&cookie->lock);
 	hlist_del_init(&object->cookie_link);
-	if (test_and_clear_bit(FSCACHE_COOKIE_INVALIDATING, &cookie->flags))
+	if (hlist_empty(&cookie->backing_objects) &&
+	    test_and_clear_bit(FSCACHE_COOKIE_INVALIDATING, &cookie->flags))
 		awaken = true;
 	spin_unlock(&cookie->lock);
 
@@ -927,7 +930,7 @@
 	 */
 	if (!fscache_use_cookie(object)) {
 		ASSERT(object->cookie->stores.rnode == NULL);
-		set_bit(FSCACHE_COOKIE_RETIRED, &cookie->flags);
+		set_bit(FSCACHE_OBJECT_RETIRED, &object->flags);
 		_leave(" [no cookie]");
 		return transit_to(KILL_OBJECT);
 	}
diff --git a/fs/fscache/page.c b/fs/fscache/page.c
index 73899c1..7f5c658 100644
--- a/fs/fscache/page.c
+++ b/fs/fscache/page.c
@@ -163,12 +163,10 @@
 
 	fscache_stat(&fscache_n_attr_changed_calls);
 
-	if (fscache_object_is_active(object) &&
-	    fscache_use_cookie(object)) {
+	if (fscache_object_is_active(object)) {
 		fscache_stat(&fscache_n_cop_attr_changed);
 		ret = object->cache->ops->attr_changed(object);
 		fscache_stat_d(&fscache_n_cop_attr_changed);
-		fscache_unuse_cookie(object);
 		if (ret < 0)
 			fscache_abort_object(object);
 	}
@@ -184,6 +182,7 @@
 {
 	struct fscache_operation *op;
 	struct fscache_object *object;
+	bool wake_cookie;
 
 	_enter("%p", cookie);
 
@@ -199,15 +198,19 @@
 	}
 
 	fscache_operation_init(op, fscache_attr_changed_op, NULL);
-	op->flags = FSCACHE_OP_ASYNC | (1 << FSCACHE_OP_EXCLUSIVE);
+	op->flags = FSCACHE_OP_ASYNC |
+		(1 << FSCACHE_OP_EXCLUSIVE) |
+		(1 << FSCACHE_OP_UNUSE_COOKIE);
 
 	spin_lock(&cookie->lock);
 
-	if (hlist_empty(&cookie->backing_objects))
+	if (!fscache_cookie_enabled(cookie) ||
+	    hlist_empty(&cookie->backing_objects))
 		goto nobufs;
 	object = hlist_entry(cookie->backing_objects.first,
 			     struct fscache_object, cookie_link);
 
+	__fscache_use_cookie(cookie);
 	if (fscache_submit_exclusive_op(object, op) < 0)
 		goto nobufs;
 	spin_unlock(&cookie->lock);
@@ -217,8 +220,11 @@
 	return 0;
 
 nobufs:
+	wake_cookie = __fscache_unuse_cookie(cookie);
 	spin_unlock(&cookie->lock);
 	kfree(op);
+	if (wake_cookie)
+		__fscache_wake_unused_cookie(cookie);
 	fscache_stat(&fscache_n_attr_changed_nobufs);
 	_leave(" = %d", -ENOBUFS);
 	return -ENOBUFS;
@@ -263,7 +269,6 @@
 	}
 
 	fscache_operation_init(&op->op, NULL, fscache_release_retrieval_op);
-	atomic_inc(&cookie->n_active);
 	op->op.flags	= FSCACHE_OP_MYTHREAD |
 		(1UL << FSCACHE_OP_WAITING) |
 		(1UL << FSCACHE_OP_UNUSE_COOKIE);
@@ -384,6 +389,7 @@
 {
 	struct fscache_retrieval *op;
 	struct fscache_object *object;
+	bool wake_cookie = false;
 	int ret;
 
 	_enter("%p,%p,,,", cookie, page);
@@ -405,7 +411,7 @@
 		return -ERESTARTSYS;
 
 	op = fscache_alloc_retrieval(cookie, page->mapping,
-				     end_io_func,context);
+				     end_io_func, context);
 	if (!op) {
 		_leave(" = -ENOMEM");
 		return -ENOMEM;
@@ -414,13 +420,15 @@
 
 	spin_lock(&cookie->lock);
 
-	if (hlist_empty(&cookie->backing_objects))
+	if (!fscache_cookie_enabled(cookie) ||
+	    hlist_empty(&cookie->backing_objects))
 		goto nobufs_unlock;
 	object = hlist_entry(cookie->backing_objects.first,
 			     struct fscache_object, cookie_link);
 
 	ASSERT(test_bit(FSCACHE_OBJECT_IS_LOOKED_UP, &object->flags));
 
+	__fscache_use_cookie(cookie);
 	atomic_inc(&object->n_reads);
 	__set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags);
 
@@ -475,9 +483,11 @@
 
 nobufs_unlock_dec:
 	atomic_dec(&object->n_reads);
+	wake_cookie = __fscache_unuse_cookie(cookie);
 nobufs_unlock:
 	spin_unlock(&cookie->lock);
-	atomic_dec(&cookie->n_active);
+	if (wake_cookie)
+		__fscache_wake_unused_cookie(cookie);
 	kfree(op);
 nobufs:
 	fscache_stat(&fscache_n_retrievals_nobufs);
@@ -514,6 +524,7 @@
 {
 	struct fscache_retrieval *op;
 	struct fscache_object *object;
+	bool wake_cookie = false;
 	int ret;
 
 	_enter("%p,,%d,,,", cookie, *nr_pages);
@@ -542,11 +553,13 @@
 
 	spin_lock(&cookie->lock);
 
-	if (hlist_empty(&cookie->backing_objects))
+	if (!fscache_cookie_enabled(cookie) ||
+	    hlist_empty(&cookie->backing_objects))
 		goto nobufs_unlock;
 	object = hlist_entry(cookie->backing_objects.first,
 			     struct fscache_object, cookie_link);
 
+	__fscache_use_cookie(cookie);
 	atomic_inc(&object->n_reads);
 	__set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags);
 
@@ -601,10 +614,12 @@
 
 nobufs_unlock_dec:
 	atomic_dec(&object->n_reads);
+	wake_cookie = __fscache_unuse_cookie(cookie);
 nobufs_unlock:
 	spin_unlock(&cookie->lock);
-	atomic_dec(&cookie->n_active);
 	kfree(op);
+	if (wake_cookie)
+		__fscache_wake_unused_cookie(cookie);
 nobufs:
 	fscache_stat(&fscache_n_retrievals_nobufs);
 	_leave(" = -ENOBUFS");
@@ -626,6 +641,7 @@
 {
 	struct fscache_retrieval *op;
 	struct fscache_object *object;
+	bool wake_cookie = false;
 	int ret;
 
 	_enter("%p,%p,,,", cookie, page);
@@ -653,13 +669,15 @@
 
 	spin_lock(&cookie->lock);
 
-	if (hlist_empty(&cookie->backing_objects))
+	if (!fscache_cookie_enabled(cookie) ||
+	    hlist_empty(&cookie->backing_objects))
 		goto nobufs_unlock;
 	object = hlist_entry(cookie->backing_objects.first,
 			     struct fscache_object, cookie_link);
 
+	__fscache_use_cookie(cookie);
 	if (fscache_submit_op(object, &op->op) < 0)
-		goto nobufs_unlock;
+		goto nobufs_unlock_dec;
 	spin_unlock(&cookie->lock);
 
 	fscache_stat(&fscache_n_alloc_ops);
@@ -689,10 +707,13 @@
 	_leave(" = %d", ret);
 	return ret;
 
+nobufs_unlock_dec:
+	wake_cookie = __fscache_unuse_cookie(cookie);
 nobufs_unlock:
 	spin_unlock(&cookie->lock);
-	atomic_dec(&cookie->n_active);
 	kfree(op);
+	if (wake_cookie)
+		__fscache_wake_unused_cookie(cookie);
 nobufs:
 	fscache_stat(&fscache_n_allocs_nobufs);
 	_leave(" = -ENOBUFS");
@@ -889,6 +910,7 @@
 {
 	struct fscache_storage *op;
 	struct fscache_object *object;
+	bool wake_cookie = false;
 	int ret;
 
 	_enter("%p,%x,", cookie, (u32) page->flags);
@@ -920,7 +942,8 @@
 	ret = -ENOBUFS;
 	spin_lock(&cookie->lock);
 
-	if (hlist_empty(&cookie->backing_objects))
+	if (!fscache_cookie_enabled(cookie) ||
+	    hlist_empty(&cookie->backing_objects))
 		goto nobufs;
 	object = hlist_entry(cookie->backing_objects.first,
 			     struct fscache_object, cookie_link);
@@ -957,7 +980,7 @@
 	op->op.debug_id	= atomic_inc_return(&fscache_op_debug_id);
 	op->store_limit = object->store_limit;
 
-	atomic_inc(&cookie->n_active);
+	__fscache_use_cookie(cookie);
 	if (fscache_submit_op(object, &op->op) < 0)
 		goto submit_failed;
 
@@ -984,10 +1007,10 @@
 	return 0;
 
 submit_failed:
-	atomic_dec(&cookie->n_active);
 	spin_lock(&cookie->stores_lock);
 	radix_tree_delete(&cookie->stores, page->index);
 	spin_unlock(&cookie->stores_lock);
+	wake_cookie = __fscache_unuse_cookie(cookie);
 	page_cache_release(page);
 	ret = -ENOBUFS;
 	goto nobufs;
@@ -999,6 +1022,8 @@
 	spin_unlock(&cookie->lock);
 	radix_tree_preload_end();
 	kfree(op);
+	if (wake_cookie)
+		__fscache_wake_unused_cookie(cookie);
 	fscache_stat(&fscache_n_stores_nobufs);
 	_leave(" = -ENOBUFS");
 	return -ENOBUFS;
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 1f7d805..b7fc035 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -611,12 +611,14 @@
 		gfs2_write_calc_reserv(ip, len, &data_blocks, &ind_blocks);
 
 	if (alloc_required) {
+		struct gfs2_alloc_parms ap = { .aflags = 0, };
 		error = gfs2_quota_lock_check(ip);
 		if (error)
 			goto out_unlock;
 
 		requested = data_blocks + ind_blocks;
-		error = gfs2_inplace_reserve(ip, requested, 0);
+		ap.target = requested;
+		error = gfs2_inplace_reserve(ip, &ap);
 		if (error)
 			goto out_qunlock;
 	}
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 62a65fc..fe0500c 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1216,6 +1216,7 @@
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct gfs2_alloc_parms ap = { .target = 1, };
 	struct buffer_head *dibh;
 	int error;
 	int unstuff = 0;
@@ -1226,7 +1227,7 @@
 		if (error)
 			return error;
 
-		error = gfs2_inplace_reserve(ip, 1, 0);
+		error = gfs2_inplace_reserve(ip, &ap);
 		if (error)
 			goto do_grow_qunlock;
 		unstuff = 1;
@@ -1279,6 +1280,7 @@
 
 int gfs2_setattr_size(struct inode *inode, u64 newsize)
 {
+	struct gfs2_inode *ip = GFS2_I(inode);
 	int ret;
 	u64 oldsize;
 
@@ -1294,7 +1296,7 @@
 
 	inode_dio_wait(inode);
 
-	ret = gfs2_rs_alloc(GFS2_I(inode));
+	ret = gfs2_rs_alloc(ip);
 	if (ret)
 		goto out;
 
@@ -1304,6 +1306,7 @@
 		goto out;
 	}
 
+	gfs2_rs_deltree(ip->i_res);
 	ret = do_shrink(inode, oldsize, newsize);
 out:
 	put_write_access(inode);
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 0621b46..efc078f 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -383,6 +383,7 @@
 	struct inode *inode = file_inode(vma->vm_file);
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct gfs2_alloc_parms ap = { .aflags = 0, };
 	unsigned long last_index;
 	u64 pos = page->index << PAGE_CACHE_SHIFT;
 	unsigned int data_blocks, ind_blocks, rblocks;
@@ -430,7 +431,8 @@
 	if (ret)
 		goto out_unlock;
 	gfs2_write_calc_reserv(ip, PAGE_CACHE_SIZE, &data_blocks, &ind_blocks);
-	ret = gfs2_inplace_reserve(ip, data_blocks + ind_blocks, 0);
+	ap.target = data_blocks + ind_blocks;
+	ret = gfs2_inplace_reserve(ip, &ap);
 	if (ret)
 		goto out_quota_unlock;
 
@@ -620,7 +622,7 @@
 	if (!(file->f_mode & FMODE_WRITE))
 		return 0;
 
-	gfs2_rs_delete(ip);
+	gfs2_rs_delete(ip, &inode->i_writecount);
 	return 0;
 }
 
@@ -800,6 +802,7 @@
 	struct inode *inode = file_inode(file);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
 	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_alloc_parms ap = { .aflags = 0, };
 	unsigned int data_blocks = 0, ind_blocks = 0, rblocks;
 	loff_t bytes, max_bytes;
 	int error;
@@ -850,7 +853,8 @@
 retry:
 		gfs2_write_calc_reserv(ip, bytes, &data_blocks, &ind_blocks);
 
-		error = gfs2_inplace_reserve(ip, data_blocks + ind_blocks, 0);
+		ap.target = data_blocks + ind_blocks;
+		error = gfs2_inplace_reserve(ip, &ap);
 		if (error) {
 			if (error == -ENOSPC && bytes > sdp->sd_sb.sb_bsize) {
 				bytes >>= 1;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index c2f41b4..e66a800 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -31,6 +31,7 @@
 #include <linux/bit_spinlock.h>
 #include <linux/percpu.h>
 #include <linux/list_sort.h>
+#include <linux/lockref.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -129,10 +130,10 @@
  *
  */
 
-void gfs2_glock_hold(struct gfs2_glock *gl)
+static void gfs2_glock_hold(struct gfs2_glock *gl)
 {
-	GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0);
-	atomic_inc(&gl->gl_ref);
+	GLOCK_BUG_ON(gl, __lockref_is_dead(&gl->gl_lockref));
+	lockref_get(&gl->gl_lockref);
 }
 
 /**
@@ -187,20 +188,6 @@
 }
 
 /**
- * gfs2_glock_put_nolock() - Decrement reference count on glock
- * @gl: The glock to put
- *
- * This function should only be used if the caller has its own reference
- * to the glock, in addition to the one it is dropping.
- */
-
-void gfs2_glock_put_nolock(struct gfs2_glock *gl)
-{
-	if (atomic_dec_and_test(&gl->gl_ref))
-		GLOCK_BUG_ON(gl, 1);
-}
-
-/**
  * gfs2_glock_put() - Decrement reference count on glock
  * @gl: The glock to put
  *
@@ -211,17 +198,22 @@
 	struct gfs2_sbd *sdp = gl->gl_sbd;
 	struct address_space *mapping = gfs2_glock2aspace(gl);
 
-	if (atomic_dec_and_lock(&gl->gl_ref, &lru_lock)) {
-		__gfs2_glock_remove_from_lru(gl);
-		spin_unlock(&lru_lock);
-		spin_lock_bucket(gl->gl_hash);
-		hlist_bl_del_rcu(&gl->gl_list);
-		spin_unlock_bucket(gl->gl_hash);
-		GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
-		GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
-		trace_gfs2_glock_put(gl);
-		sdp->sd_lockstruct.ls_ops->lm_put_lock(gl);
-	}
+	if (lockref_put_or_lock(&gl->gl_lockref))
+		return;
+
+	lockref_mark_dead(&gl->gl_lockref);
+
+	spin_lock(&lru_lock);
+	__gfs2_glock_remove_from_lru(gl);
+	spin_unlock(&lru_lock);
+	spin_unlock(&gl->gl_lockref.lock);
+	spin_lock_bucket(gl->gl_hash);
+	hlist_bl_del_rcu(&gl->gl_list);
+	spin_unlock_bucket(gl->gl_hash);
+	GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
+	GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
+	trace_gfs2_glock_put(gl);
+	sdp->sd_lockstruct.ls_ops->lm_put_lock(gl);
 }
 
 /**
@@ -244,7 +236,7 @@
 			continue;
 		if (gl->gl_sbd != sdp)
 			continue;
-		if (atomic_inc_not_zero(&gl->gl_ref))
+		if (lockref_get_not_dead(&gl->gl_lockref))
 			return gl;
 	}
 
@@ -396,10 +388,11 @@
 	held2 = (new_state != LM_ST_UNLOCKED);
 
 	if (held1 != held2) {
+		GLOCK_BUG_ON(gl, __lockref_is_dead(&gl->gl_lockref));
 		if (held2)
-			gfs2_glock_hold(gl);
+			gl->gl_lockref.count++;
 		else
-			gfs2_glock_put_nolock(gl);
+			gl->gl_lockref.count--;
 	}
 	if (held1 && held2 && list_empty(&gl->gl_holders))
 		clear_bit(GLF_QUEUED, &gl->gl_flags);
@@ -626,9 +619,9 @@
 out_sched:
 	clear_bit(GLF_LOCK, &gl->gl_flags);
 	smp_mb__after_clear_bit();
-	gfs2_glock_hold(gl);
+	gl->gl_lockref.count++;
 	if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-		gfs2_glock_put_nolock(gl);
+		gl->gl_lockref.count--;
 	return;
 
 out_unlock:
@@ -754,7 +747,7 @@
 	gl->gl_sbd = sdp;
 	gl->gl_flags = 0;
 	gl->gl_name = name;
-	atomic_set(&gl->gl_ref, 1);
+	gl->gl_lockref.count = 1;
 	gl->gl_state = LM_ST_UNLOCKED;
 	gl->gl_target = LM_ST_UNLOCKED;
 	gl->gl_demote_state = LM_ST_EXCLUSIVE;
@@ -1356,10 +1349,10 @@
 		}
 	}
 
-	spin_unlock(&gl->gl_spin);
+	gl->gl_lockref.count++;
 	set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
-	smp_wmb();
-	gfs2_glock_hold(gl);
+	spin_unlock(&gl->gl_spin);
+
 	if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 		gfs2_glock_put(gl);
 }
@@ -1404,15 +1397,19 @@
 	while(!list_empty(list)) {
 		gl = list_entry(list->next, struct gfs2_glock, gl_lru);
 		list_del_init(&gl->gl_lru);
+		if (!spin_trylock(&gl->gl_spin)) {
+			list_add(&gl->gl_lru, &lru_list);
+			atomic_inc(&lru_count);
+			continue;
+		}
 		clear_bit(GLF_LRU, &gl->gl_flags);
-		gfs2_glock_hold(gl);
 		spin_unlock(&lru_lock);
-		spin_lock(&gl->gl_spin);
+		gl->gl_lockref.count++;
 		if (demote_ok(gl))
 			handle_callback(gl, LM_ST_UNLOCKED, 0, false);
 		WARN_ON(!test_and_clear_bit(GLF_LOCK, &gl->gl_flags));
 		if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-			gfs2_glock_put_nolock(gl);
+			gl->gl_lockref.count--;
 		spin_unlock(&gl->gl_spin);
 		spin_lock(&lru_lock);
 	}
@@ -1493,7 +1490,7 @@
 
 	rcu_read_lock();
 	hlist_bl_for_each_entry_rcu(gl, pos, head, gl_list) {
-		if ((gl->gl_sbd == sdp) && atomic_inc_not_zero(&gl->gl_ref))
+		if ((gl->gl_sbd == sdp) && lockref_get_not_dead(&gl->gl_lockref))
 			examiner(gl);
 	}
 	rcu_read_unlock();
@@ -1746,7 +1743,7 @@
 		  state2str(gl->gl_demote_state), dtime,
 		  atomic_read(&gl->gl_ail_count),
 		  atomic_read(&gl->gl_revokes),
-		  atomic_read(&gl->gl_ref), gl->gl_hold_time);
+		  (int)gl->gl_lockref.count, gl->gl_hold_time);
 
 	list_for_each_entry(gh, &gl->gl_holders, gh_list) {
 		error = dump_holder(seq, gh);
@@ -1902,7 +1899,7 @@
 			gi->nhash = 0;
 		}
 	/* Skip entries for other sb and dead entries */
-	} while (gi->sdp != gi->gl->gl_sbd || atomic_read(&gi->gl->gl_ref) == 0);
+	} while (gi->sdp != gi->gl->gl_sbd || __lockref_is_dead(&gl->gl_lockref));
 
 	return 0;
 }
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index 69f66e3..6647d77 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -181,8 +181,6 @@
 extern int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number,
 			  const struct gfs2_glock_operations *glops,
 			  int create, struct gfs2_glock **glp);
-extern void gfs2_glock_hold(struct gfs2_glock *gl);
-extern void gfs2_glock_put_nolock(struct gfs2_glock *gl);
 extern void gfs2_glock_put(struct gfs2_glock *gl);
 extern void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state,
 			     unsigned flags, struct gfs2_holder *gh);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index e2e0a90..db908f6 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -525,9 +525,9 @@
 
 	if (gl->gl_demote_state == LM_ST_UNLOCKED &&
 	    gl->gl_state == LM_ST_SHARED && ip) {
-		gfs2_glock_hold(gl);
+		gl->gl_lockref.count++;
 		if (queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
-			gfs2_glock_put_nolock(gl);
+			gl->gl_lockref.count--;
 	}
 }
 
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 26aabd7..ba1ea67 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -21,6 +21,7 @@
 #include <linux/rbtree.h>
 #include <linux/ktime.h>
 #include <linux/percpu.h>
+#include <linux/lockref.h>
 
 #define DIO_WAIT	0x00000010
 #define DIO_METADATA	0x00000020
@@ -71,6 +72,7 @@
 	u32 bi_offset;
 	u32 bi_start;
 	u32 bi_len;
+	u32 bi_blocks;
 };
 
 struct gfs2_rgrpd {
@@ -101,19 +103,25 @@
 
 struct gfs2_rbm {
 	struct gfs2_rgrpd *rgd;
-	struct gfs2_bitmap *bi;	/* Bitmap must belong to the rgd */
 	u32 offset;		/* The offset is bitmap relative */
+	int bii;		/* Bitmap index */
 };
 
+static inline struct gfs2_bitmap *rbm_bi(const struct gfs2_rbm *rbm)
+{
+	return rbm->rgd->rd_bits + rbm->bii;
+}
+
 static inline u64 gfs2_rbm_to_block(const struct gfs2_rbm *rbm)
 {
-	return rbm->rgd->rd_data0 + (rbm->bi->bi_start * GFS2_NBBY) + rbm->offset;
+	return rbm->rgd->rd_data0 + (rbm_bi(rbm)->bi_start * GFS2_NBBY) +
+		rbm->offset;
 }
 
 static inline bool gfs2_rbm_eq(const struct gfs2_rbm *rbm1,
 			       const struct gfs2_rbm *rbm2)
 {
-	return (rbm1->rgd == rbm2->rgd) && (rbm1->bi == rbm2->bi) && 
+	return (rbm1->rgd == rbm2->rgd) && (rbm1->bii == rbm2->bii) &&
 	       (rbm1->offset == rbm2->offset);
 }
 
@@ -278,6 +286,20 @@
 	unsigned int rs_qa_qd_num;
 };
 
+/*
+ * Allocation parameters
+ * @target: The number of blocks we'd ideally like to allocate
+ * @aflags: The flags (e.g. Orlov flag)
+ *
+ * The intent is to gradually expand this structure over time in
+ * order to give more information, e.g. alignment, min extent size
+ * to the allocation code.
+ */
+struct gfs2_alloc_parms {
+	u32 target;
+	u32 aflags;
+};
+
 enum {
 	GLF_LOCK			= 1,
 	GLF_DEMOTE			= 3,
@@ -300,9 +322,9 @@
 	struct gfs2_sbd *gl_sbd;
 	unsigned long gl_flags;		/* GLF_... */
 	struct lm_lockname gl_name;
-	atomic_t gl_ref;
 
-	spinlock_t gl_spin;
+	struct lockref gl_lockref;
+#define gl_spin gl_lockref.lock
 
 	/* State fields protected by gl_spin */
 	unsigned int gl_state:2,	/* Current state */
@@ -398,11 +420,10 @@
 
 struct gfs2_quota_data {
 	struct list_head qd_list;
-	struct list_head qd_reclaim;
-
-	atomic_t qd_count;
-
 	struct kqid qd_id;
+	struct lockref qd_lockref;
+	struct list_head qd_lru;
+
 	unsigned long qd_flags;		/* QDF_... */
 
 	s64 qd_change;
@@ -516,7 +537,6 @@
 
 	unsigned int gt_logd_secs;
 
-	unsigned int gt_quota_simul_sync; /* Max quotavals to sync at once */
 	unsigned int gt_quota_warn_period; /* Secs between quota warn msgs */
 	unsigned int gt_quota_scale_num; /* Numerator */
 	unsigned int gt_quota_scale_den; /* Denominator */
@@ -694,6 +714,7 @@
 	struct list_head sd_quota_list;
 	atomic_t sd_quota_count;
 	struct mutex sd_quota_mutex;
+	struct mutex sd_quota_sync_mutex;
 	wait_queue_head_t sd_quota_wait;
 	struct list_head sd_trunc_list;
 	spinlock_t sd_trunc_lock;
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index ced3257..109ce93 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -379,6 +379,7 @@
 static int alloc_dinode(struct gfs2_inode *ip, u32 flags)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+	struct gfs2_alloc_parms ap = { .target = RES_DINODE, .aflags = flags, };
 	int error;
 	int dblocks = 1;
 
@@ -386,7 +387,7 @@
 	if (error)
 		goto out;
 
-	error = gfs2_inplace_reserve(ip, RES_DINODE, flags);
+	error = gfs2_inplace_reserve(ip, &ap);
 	if (error)
 		goto out_quota;
 
@@ -472,6 +473,7 @@
 		       struct gfs2_inode *ip, int arq)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
+	struct gfs2_alloc_parms ap = { .target = sdp->sd_max_dirres, };
 	int error;
 
 	if (arq) {
@@ -479,7 +481,7 @@
 		if (error)
 			goto fail_quota_locks;
 
-		error = gfs2_inplace_reserve(dip, sdp->sd_max_dirres, 0);
+		error = gfs2_inplace_reserve(dip, &ap);
 		if (error)
 			goto fail_quota_locks;
 
@@ -584,17 +586,17 @@
 	if (!IS_ERR(inode)) {
 		d = d_splice_alias(inode, dentry);
 		error = 0;
-		if (file && !IS_ERR(d)) {
-			if (d == NULL)
-				d = dentry;
-			if (S_ISREG(inode->i_mode))
-				error = finish_open(file, d, gfs2_open_common, opened);
-			else
+		if (file) {
+			if (S_ISREG(inode->i_mode)) {
+				WARN_ON(d != NULL);
+				error = finish_open(file, dentry, gfs2_open_common, opened);
+			} else {
 				error = finish_no_open(file, d);
+			}
+		} else {
+			dput(d);
 		}
 		gfs2_glock_dq_uninit(ghs);
-		if (IS_ERR(d))
-			return PTR_ERR(d);
 		return error;
 	} else if (error != -ENOENT) {
 		goto fail_gunlock;
@@ -713,7 +715,7 @@
 fail_free_inode:
 	if (ip->i_gl)
 		gfs2_glock_put(ip->i_gl);
-	gfs2_rs_delete(ip);
+	gfs2_rs_delete(ip, NULL);
 	free_inode_nonrcu(inode);
 	inode = NULL;
 fail_gunlock:
@@ -781,8 +783,10 @@
 		error = finish_open(file, dentry, gfs2_open_common, opened);
 
 	gfs2_glock_dq_uninit(&gh);
-	if (error)
+	if (error) {
+		dput(d);
 		return ERR_PTR(error);
+	}
 	return d;
 }
 
@@ -874,11 +878,12 @@
 	error = 0;
 
 	if (alloc_required) {
+		struct gfs2_alloc_parms ap = { .target = sdp->sd_max_dirres, };
 		error = gfs2_quota_lock_check(dip);
 		if (error)
 			goto out_gunlock;
 
-		error = gfs2_inplace_reserve(dip, sdp->sd_max_dirres, 0);
+		error = gfs2_inplace_reserve(dip, &ap);
 		if (error)
 			goto out_gunlock_q;
 
@@ -1163,14 +1168,16 @@
 	d = __gfs2_lookup(dir, dentry, file, opened);
 	if (IS_ERR(d))
 		return PTR_ERR(d);
-	if (d == NULL)
-		d = dentry;
-	if (d->d_inode) {
+	if (d != NULL)
+		dentry = d;
+	if (dentry->d_inode) {
 		if (!(*opened & FILE_OPENED))
-			return finish_no_open(file, d);
+			return finish_no_open(file, dentry);
+		dput(d);
 		return 0;
 	}
 
+	BUG_ON(d != NULL);
 	if (!(flags & O_CREAT))
 		return -ENOENT;
 
@@ -1385,11 +1392,12 @@
 		goto out_gunlock;
 
 	if (alloc_required) {
+		struct gfs2_alloc_parms ap = { .target = sdp->sd_max_dirres, };
 		error = gfs2_quota_lock_check(ndip);
 		if (error)
 			goto out_gunlock;
 
-		error = gfs2_inplace_reserve(ndip, sdp->sd_max_dirres, 0);
+		error = gfs2_inplace_reserve(ndip, &ap);
 		if (error)
 			goto out_gunlock_q;
 
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index 351586e..0650db2 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -31,12 +31,6 @@
 
 struct workqueue_struct *gfs2_control_wq;
 
-static struct shrinker qd_shrinker = {
-	.count_objects = gfs2_qd_shrink_count,
-	.scan_objects = gfs2_qd_shrink_scan,
-	.seeks = DEFAULT_SEEKS,
-};
-
 static void gfs2_init_inode_once(void *foo)
 {
 	struct gfs2_inode *ip = foo;
@@ -87,6 +81,10 @@
 	if (error)
 		return error;
 
+	error = list_lru_init(&gfs2_qd_lru);
+	if (error)
+		goto fail_lru;
+
 	error = gfs2_glock_init();
 	if (error)
 		goto fail;
@@ -139,7 +137,7 @@
 	if (!gfs2_rsrv_cachep)
 		goto fail;
 
-	register_shrinker(&qd_shrinker);
+	register_shrinker(&gfs2_qd_shrinker);
 
 	error = register_filesystem(&gfs2_fs_type);
 	if (error)
@@ -179,7 +177,9 @@
 fail_unregister:
 	unregister_filesystem(&gfs2_fs_type);
 fail:
-	unregister_shrinker(&qd_shrinker);
+	list_lru_destroy(&gfs2_qd_lru);
+fail_lru:
+	unregister_shrinker(&gfs2_qd_shrinker);
 	gfs2_glock_exit();
 
 	if (gfs2_rsrv_cachep)
@@ -214,13 +214,14 @@
 
 static void __exit exit_gfs2_fs(void)
 {
-	unregister_shrinker(&qd_shrinker);
+	unregister_shrinker(&gfs2_qd_shrinker);
 	gfs2_glock_exit();
 	gfs2_unregister_debugfs();
 	unregister_filesystem(&gfs2_fs_type);
 	unregister_filesystem(&gfs2meta_fs_type);
 	destroy_workqueue(gfs_recovery_wq);
 	destroy_workqueue(gfs2_control_wq);
+	list_lru_destroy(&gfs2_qd_lru);
 
 	rcu_barrier();
 
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 19ff5e8..82303b4 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -51,7 +51,6 @@
 {
 	spin_lock_init(&gt->gt_spin);
 
-	gt->gt_quota_simul_sync = 64;
 	gt->gt_quota_warn_period = 10;
 	gt->gt_quota_scale_num = 1;
 	gt->gt_quota_scale_den = 1;
@@ -94,6 +93,7 @@
 
 	INIT_LIST_HEAD(&sdp->sd_quota_list);
 	mutex_init(&sdp->sd_quota_mutex);
+	mutex_init(&sdp->sd_quota_sync_mutex);
 	init_waitqueue_head(&sdp->sd_quota_wait);
 	INIT_LIST_HEAD(&sdp->sd_trunc_list);
 	spin_lock_init(&sdp->sd_trunc_lock);
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index db44135..453b50e 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -50,6 +50,8 @@
 #include <linux/freezer.h>
 #include <linux/quota.h>
 #include <linux/dqblk_xfs.h>
+#include <linux/lockref.h>
+#include <linux/list_lru.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -71,29 +73,25 @@
 	struct kqid qc_id;
 };
 
-static LIST_HEAD(qd_lru_list);
-static atomic_t qd_lru_count = ATOMIC_INIT(0);
-static DEFINE_SPINLOCK(qd_lru_lock);
+/* Lock order: qd_lock -> qd->lockref.lock -> lru lock */
+static DEFINE_SPINLOCK(qd_lock);
+struct list_lru gfs2_qd_lru;
 
-unsigned long gfs2_qd_shrink_scan(struct shrinker *shrink,
-				  struct shrink_control *sc)
+static void gfs2_qd_dispose(struct list_head *list)
 {
 	struct gfs2_quota_data *qd;
 	struct gfs2_sbd *sdp;
-	int nr_to_scan = sc->nr_to_scan;
-	long freed = 0;
 
-	if (!(sc->gfp_mask & __GFP_FS))
-		return SHRINK_STOP;
-
-	spin_lock(&qd_lru_lock);
-	while (nr_to_scan && !list_empty(&qd_lru_list)) {
-		qd = list_entry(qd_lru_list.next,
-				struct gfs2_quota_data, qd_reclaim);
+	while (!list_empty(list)) {
+		qd = list_entry(list->next, struct gfs2_quota_data, qd_lru);
 		sdp = qd->qd_gl->gl_sbd;
 
+		list_del(&qd->qd_lru);
+
 		/* Free from the filesystem-specific list */
+		spin_lock(&qd_lock);
 		list_del(&qd->qd_list);
+		spin_unlock(&qd_lock);
 
 		gfs2_assert_warn(sdp, !qd->qd_change);
 		gfs2_assert_warn(sdp, !qd->qd_slot_count);
@@ -103,24 +101,59 @@
 		atomic_dec(&sdp->sd_quota_count);
 
 		/* Delete it from the common reclaim list */
-		list_del_init(&qd->qd_reclaim);
-		atomic_dec(&qd_lru_count);
-		spin_unlock(&qd_lru_lock);
 		kmem_cache_free(gfs2_quotad_cachep, qd);
-		spin_lock(&qd_lru_lock);
-		nr_to_scan--;
-		freed++;
 	}
-	spin_unlock(&qd_lru_lock);
+}
+
+
+static enum lru_status gfs2_qd_isolate(struct list_head *item, spinlock_t *lock, void *arg)
+{
+	struct list_head *dispose = arg;
+	struct gfs2_quota_data *qd = list_entry(item, struct gfs2_quota_data, qd_lru);
+
+	if (!spin_trylock(&qd->qd_lockref.lock))
+		return LRU_SKIP;
+
+	if (qd->qd_lockref.count == 0) {
+		lockref_mark_dead(&qd->qd_lockref);
+		list_move(&qd->qd_lru, dispose);
+	}
+
+	spin_unlock(&qd->qd_lockref.lock);
+	return LRU_REMOVED;
+}
+
+static unsigned long gfs2_qd_shrink_scan(struct shrinker *shrink,
+					 struct shrink_control *sc)
+{
+	LIST_HEAD(dispose);
+	unsigned long freed;
+
+	if (!(sc->gfp_mask & __GFP_FS))
+		return SHRINK_STOP;
+
+	freed = list_lru_walk_node(&gfs2_qd_lru, sc->nid, gfs2_qd_isolate,
+				   &dispose, &sc->nr_to_scan);
+
+	gfs2_qd_dispose(&dispose);
+
 	return freed;
 }
 
-unsigned long gfs2_qd_shrink_count(struct shrinker *shrink,
-				   struct shrink_control *sc)
+static unsigned long gfs2_qd_shrink_count(struct shrinker *shrink,
+					  struct shrink_control *sc)
 {
-	return vfs_pressure_ratio(atomic_read(&qd_lru_count));
+	return vfs_pressure_ratio(list_lru_count_node(&gfs2_qd_lru, sc->nid));
 }
 
+struct shrinker gfs2_qd_shrinker = {
+	.count_objects = gfs2_qd_shrink_count,
+	.scan_objects = gfs2_qd_shrink_scan,
+	.seeks = DEFAULT_SEEKS,
+	.flags = SHRINKER_NUMA_AWARE,
+};
+
+
 static u64 qd2index(struct gfs2_quota_data *qd)
 {
 	struct kqid qid = qd->qd_id;
@@ -148,10 +181,11 @@
 	if (!qd)
 		return -ENOMEM;
 
-	atomic_set(&qd->qd_count, 1);
+	qd->qd_lockref.count = 1;
+	spin_lock_init(&qd->qd_lockref.lock);
 	qd->qd_id = qid;
 	qd->qd_slot = -1;
-	INIT_LIST_HEAD(&qd->qd_reclaim);
+	INIT_LIST_HEAD(&qd->qd_lru);
 
 	error = gfs2_glock_get(sdp, qd2index(qd),
 			      &gfs2_quota_glops, CREATE, &qd->qd_gl);
@@ -177,16 +211,11 @@
 
 	for (;;) {
 		found = 0;
-		spin_lock(&qd_lru_lock);
+		spin_lock(&qd_lock);
 		list_for_each_entry(qd, &sdp->sd_quota_list, qd_list) {
-			if (qid_eq(qd->qd_id, qid)) {
-				if (!atomic_read(&qd->qd_count) &&
-				    !list_empty(&qd->qd_reclaim)) {
-					/* Remove it from reclaim list */
-					list_del_init(&qd->qd_reclaim);
-					atomic_dec(&qd_lru_count);
-				}
-				atomic_inc(&qd->qd_count);
+			if (qid_eq(qd->qd_id, qid) &&
+			    lockref_get_not_dead(&qd->qd_lockref)) {
+				list_lru_del(&gfs2_qd_lru, &qd->qd_lru);
 				found = 1;
 				break;
 			}
@@ -202,7 +231,7 @@
 			new_qd = NULL;
 		}
 
-		spin_unlock(&qd_lru_lock);
+		spin_unlock(&qd_lock);
 
 		if (qd) {
 			if (new_qd) {
@@ -222,18 +251,19 @@
 static void qd_hold(struct gfs2_quota_data *qd)
 {
 	struct gfs2_sbd *sdp = qd->qd_gl->gl_sbd;
-	gfs2_assert(sdp, atomic_read(&qd->qd_count));
-	atomic_inc(&qd->qd_count);
+	gfs2_assert(sdp, !__lockref_is_dead(&qd->qd_lockref));
+	lockref_get(&qd->qd_lockref);
 }
 
 static void qd_put(struct gfs2_quota_data *qd)
 {
-	if (atomic_dec_and_lock(&qd->qd_count, &qd_lru_lock)) {
-		/* Add to the reclaim list */
-		list_add_tail(&qd->qd_reclaim, &qd_lru_list);
-		atomic_inc(&qd_lru_count);
-		spin_unlock(&qd_lru_lock);
-	}
+	if (lockref_put_or_lock(&qd->qd_lockref))
+		return;
+
+	qd->qd_lockref.count = 0;
+	list_lru_add(&gfs2_qd_lru, &qd->qd_lru);
+	spin_unlock(&qd->qd_lockref.lock);
+
 }
 
 static int slot_get(struct gfs2_quota_data *qd)
@@ -242,10 +272,10 @@
 	unsigned int c, o = 0, b;
 	unsigned char byte = 0;
 
-	spin_lock(&qd_lru_lock);
+	spin_lock(&qd_lock);
 
 	if (qd->qd_slot_count++) {
-		spin_unlock(&qd_lru_lock);
+		spin_unlock(&qd_lock);
 		return 0;
 	}
 
@@ -269,13 +299,13 @@
 
 	sdp->sd_quota_bitmap[c][o] |= 1 << b;
 
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
 
 	return 0;
 
 fail:
 	qd->qd_slot_count--;
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
 	return -ENOSPC;
 }
 
@@ -283,23 +313,43 @@
 {
 	struct gfs2_sbd *sdp = qd->qd_gl->gl_sbd;
 
-	spin_lock(&qd_lru_lock);
+	spin_lock(&qd_lock);
 	gfs2_assert(sdp, qd->qd_slot_count);
 	qd->qd_slot_count++;
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
+}
+
+static void gfs2_icbit_munge(struct gfs2_sbd *sdp, unsigned char **bitmap,
+			     unsigned int bit, int new_value)
+{
+	unsigned int c, o, b = bit;
+	int old_value;
+
+	c = b / (8 * PAGE_SIZE);
+	b %= 8 * PAGE_SIZE;
+	o = b / 8;
+	b %= 8;
+
+	old_value = (bitmap[c][o] & (1 << b));
+	gfs2_assert_withdraw(sdp, !old_value != !new_value);
+
+	if (new_value)
+		bitmap[c][o] |= 1 << b;
+	else
+		bitmap[c][o] &= ~(1 << b);
 }
 
 static void slot_put(struct gfs2_quota_data *qd)
 {
 	struct gfs2_sbd *sdp = qd->qd_gl->gl_sbd;
 
-	spin_lock(&qd_lru_lock);
+	spin_lock(&qd_lock);
 	gfs2_assert(sdp, qd->qd_slot_count);
 	if (!--qd->qd_slot_count) {
 		gfs2_icbit_munge(sdp, sdp->sd_quota_bitmap, qd->qd_slot, 0);
 		qd->qd_slot = -1;
 	}
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
 }
 
 static int bh_get(struct gfs2_quota_data *qd)
@@ -363,6 +413,25 @@
 	mutex_unlock(&sdp->sd_quota_mutex);
 }
 
+static int qd_check_sync(struct gfs2_sbd *sdp, struct gfs2_quota_data *qd,
+			 u64 *sync_gen)
+{
+	if (test_bit(QDF_LOCKED, &qd->qd_flags) ||
+	    !test_bit(QDF_CHANGE, &qd->qd_flags) ||
+	    (sync_gen && (qd->qd_sync_gen >= *sync_gen)))
+		return 0;
+
+	if (!lockref_get_not_dead(&qd->qd_lockref))
+		return 0;
+
+	list_move_tail(&qd->qd_list, &sdp->sd_quota_list);
+	set_bit(QDF_LOCKED, &qd->qd_flags);
+	qd->qd_change_sync = qd->qd_change;
+	gfs2_assert_warn(sdp, qd->qd_slot_count);
+	qd->qd_slot_count++;
+	return 1;
+}
+
 static int qd_fish(struct gfs2_sbd *sdp, struct gfs2_quota_data **qdp)
 {
 	struct gfs2_quota_data *qd = NULL;
@@ -374,31 +443,18 @@
 	if (sdp->sd_vfs->s_flags & MS_RDONLY)
 		return 0;
 
-	spin_lock(&qd_lru_lock);
+	spin_lock(&qd_lock);
 
 	list_for_each_entry(qd, &sdp->sd_quota_list, qd_list) {
-		if (test_bit(QDF_LOCKED, &qd->qd_flags) ||
-		    !test_bit(QDF_CHANGE, &qd->qd_flags) ||
-		    qd->qd_sync_gen >= sdp->sd_quota_sync_gen)
-			continue;
-
-		list_move_tail(&qd->qd_list, &sdp->sd_quota_list);
-
-		set_bit(QDF_LOCKED, &qd->qd_flags);
-		gfs2_assert_warn(sdp, atomic_read(&qd->qd_count));
-		atomic_inc(&qd->qd_count);
-		qd->qd_change_sync = qd->qd_change;
-		gfs2_assert_warn(sdp, qd->qd_slot_count);
-		qd->qd_slot_count++;
-		found = 1;
-
-		break;
+		found = qd_check_sync(sdp, qd, &sdp->sd_quota_sync_gen);
+		if (found)
+			break;
 	}
 
 	if (!found)
 		qd = NULL;
 
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
 
 	if (qd) {
 		gfs2_assert_warn(sdp, qd->qd_change_sync);
@@ -416,43 +472,6 @@
 	return 0;
 }
 
-static int qd_trylock(struct gfs2_quota_data *qd)
-{
-	struct gfs2_sbd *sdp = qd->qd_gl->gl_sbd;
-
-	if (sdp->sd_vfs->s_flags & MS_RDONLY)
-		return 0;
-
-	spin_lock(&qd_lru_lock);
-
-	if (test_bit(QDF_LOCKED, &qd->qd_flags) ||
-	    !test_bit(QDF_CHANGE, &qd->qd_flags)) {
-		spin_unlock(&qd_lru_lock);
-		return 0;
-	}
-
-	list_move_tail(&qd->qd_list, &sdp->sd_quota_list);
-
-	set_bit(QDF_LOCKED, &qd->qd_flags);
-	gfs2_assert_warn(sdp, atomic_read(&qd->qd_count));
-	atomic_inc(&qd->qd_count);
-	qd->qd_change_sync = qd->qd_change;
-	gfs2_assert_warn(sdp, qd->qd_slot_count);
-	qd->qd_slot_count++;
-
-	spin_unlock(&qd_lru_lock);
-
-	gfs2_assert_warn(sdp, qd->qd_change_sync);
-	if (bh_get(qd)) {
-		clear_bit(QDF_LOCKED, &qd->qd_flags);
-		slot_put(qd);
-		qd_put(qd);
-		return 0;
-	}
-
-	return 1;
-}
-
 static void qd_unlock(struct gfs2_quota_data *qd)
 {
 	gfs2_assert_warn(qd->qd_gl->gl_sbd,
@@ -602,9 +621,9 @@
 	x = be64_to_cpu(qc->qc_change) + change;
 	qc->qc_change = cpu_to_be64(x);
 
-	spin_lock(&qd_lru_lock);
+	spin_lock(&qd_lock);
 	qd->qd_change = x;
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
 
 	if (!x) {
 		gfs2_assert_warn(sdp, test_bit(QDF_CHANGE, &qd->qd_flags));
@@ -763,6 +782,7 @@
 {
 	struct gfs2_sbd *sdp = (*qda)->qd_gl->gl_sbd;
 	struct gfs2_inode *ip = GFS2_I(sdp->sd_quota_inode);
+	struct gfs2_alloc_parms ap = { .aflags = 0, };
 	unsigned int data_blocks, ind_blocks;
 	struct gfs2_holder *ghs, i_gh;
 	unsigned int qx, x;
@@ -815,7 +835,8 @@
 	blocks = num_qd * data_blocks + RES_DINODE + num_qd + 3;
 
 	reserved = 1 + (nalloc * (data_blocks + ind_blocks));
-	error = gfs2_inplace_reserve(ip, reserved, 0);
+	ap.target = reserved;
+	error = gfs2_inplace_reserve(ip, &ap);
 	if (error)
 		goto out_alloc;
 
@@ -974,9 +995,9 @@
 	if (!qd->qd_qb.qb_limit)
 		return 0;
 
-	spin_lock(&qd_lru_lock);
+	spin_lock(&qd_lock);
 	value = qd->qd_change;
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
 
 	spin_lock(&gt->gt_spin);
 	num = gt->gt_quota_scale_num;
@@ -1001,9 +1022,11 @@
 
 void gfs2_quota_unlock(struct gfs2_inode *ip)
 {
+	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct gfs2_quota_data *qda[4];
 	unsigned int count = 0;
 	unsigned int x;
+	int found;
 
 	if (!test_and_clear_bit(GIF_QD_LOCKED, &ip->i_flags))
 		goto out;
@@ -1016,9 +1039,25 @@
 		sync = need_sync(qd);
 
 		gfs2_glock_dq_uninit(&ip->i_res->rs_qa_qd_ghs[x]);
+		if (!sync)
+			continue;
 
-		if (sync && qd_trylock(qd))
-			qda[count++] = qd;
+		spin_lock(&qd_lock);
+		found = qd_check_sync(sdp, qd, NULL);
+		spin_unlock(&qd_lock);
+
+		if (!found)
+			continue;
+
+		gfs2_assert_warn(sdp, qd->qd_change_sync);
+		if (bh_get(qd)) {
+			clear_bit(QDF_LOCKED, &qd->qd_flags);
+			slot_put(qd);
+			qd_put(qd);
+			continue;
+		}
+
+		qda[count++] = qd;
 	}
 
 	if (count) {
@@ -1067,9 +1106,9 @@
 			continue;
 
 		value = (s64)be64_to_cpu(qd->qd_qb.qb_value);
-		spin_lock(&qd_lru_lock);
+		spin_lock(&qd_lock);
 		value += qd->qd_change;
-		spin_unlock(&qd_lru_lock);
+		spin_unlock(&qd_lock);
 
 		if (be64_to_cpu(qd->qd_qb.qb_limit) && (s64)be64_to_cpu(qd->qd_qb.qb_limit) < value) {
 			print_message(qd, "exceeded");
@@ -1118,17 +1157,18 @@
 {
 	struct gfs2_sbd *sdp = sb->s_fs_info;
 	struct gfs2_quota_data **qda;
-	unsigned int max_qd = gfs2_tune_get(sdp, gt_quota_simul_sync);
+	unsigned int max_qd = PAGE_SIZE/sizeof(struct gfs2_holder);
 	unsigned int num_qd;
 	unsigned int x;
 	int error = 0;
 
-	sdp->sd_quota_sync_gen++;
-
 	qda = kcalloc(max_qd, sizeof(struct gfs2_quota_data *), GFP_KERNEL);
 	if (!qda)
 		return -ENOMEM;
 
+	mutex_lock(&sdp->sd_quota_sync_mutex);
+	sdp->sd_quota_sync_gen++;
+
 	do {
 		num_qd = 0;
 
@@ -1153,6 +1193,7 @@
 		}
 	} while (!error && num_qd == max_qd);
 
+	mutex_unlock(&sdp->sd_quota_sync_mutex);
 	kfree(qda);
 
 	return error;
@@ -1258,11 +1299,11 @@
 			qd->qd_slot = slot;
 			qd->qd_slot_count = 1;
 
-			spin_lock(&qd_lru_lock);
+			spin_lock(&qd_lock);
 			gfs2_icbit_munge(sdp, sdp->sd_quota_bitmap, slot, 1);
 			list_add(&qd->qd_list, &sdp->sd_quota_list);
 			atomic_inc(&sdp->sd_quota_count);
-			spin_unlock(&qd_lru_lock);
+			spin_unlock(&qd_lock);
 
 			found++;
 		}
@@ -1288,30 +1329,34 @@
 	struct gfs2_quota_data *qd;
 	unsigned int x;
 
-	spin_lock(&qd_lru_lock);
+	spin_lock(&qd_lock);
 	while (!list_empty(head)) {
 		qd = list_entry(head->prev, struct gfs2_quota_data, qd_list);
 
-		if (atomic_read(&qd->qd_count) > 1 ||
-		    (atomic_read(&qd->qd_count) &&
-		     !test_bit(QDF_CHANGE, &qd->qd_flags))) {
+		/*
+		 * To be removed in due course... we should be able to
+		 * ensure that all refs to the qd have done by this point
+		 * so that this rather odd test is not required
+		 */
+		spin_lock(&qd->qd_lockref.lock);
+		if (qd->qd_lockref.count > 1 ||
+		    (qd->qd_lockref.count && !test_bit(QDF_CHANGE, &qd->qd_flags))) {
+			spin_unlock(&qd->qd_lockref.lock);
 			list_move(&qd->qd_list, head);
-			spin_unlock(&qd_lru_lock);
+			spin_unlock(&qd_lock);
 			schedule();
-			spin_lock(&qd_lru_lock);
+			spin_lock(&qd_lock);
 			continue;
 		}
+		spin_unlock(&qd->qd_lockref.lock);
 
 		list_del(&qd->qd_list);
 		/* Also remove if this qd exists in the reclaim list */
-		if (!list_empty(&qd->qd_reclaim)) {
-			list_del_init(&qd->qd_reclaim);
-			atomic_dec(&qd_lru_count);
-		}
+		list_lru_del(&gfs2_qd_lru, &qd->qd_lru);
 		atomic_dec(&sdp->sd_quota_count);
-		spin_unlock(&qd_lru_lock);
+		spin_unlock(&qd_lock);
 
-		if (!atomic_read(&qd->qd_count)) {
+		if (!qd->qd_lockref.count) {
 			gfs2_assert_warn(sdp, !qd->qd_change);
 			gfs2_assert_warn(sdp, !qd->qd_slot_count);
 		} else
@@ -1321,9 +1366,9 @@
 		gfs2_glock_put(qd->qd_gl);
 		kmem_cache_free(gfs2_quotad_cachep, qd);
 
-		spin_lock(&qd_lru_lock);
+		spin_lock(&qd_lock);
 	}
-	spin_unlock(&qd_lru_lock);
+	spin_unlock(&qd_lock);
 
 	gfs2_assert_warn(sdp, !atomic_read(&sdp->sd_quota_count));
 
@@ -1462,7 +1507,7 @@
 	}
 	fqs->qs_uquota.qfs_nextents = 1; /* unsupported */
 	fqs->qs_gquota = fqs->qs_uquota; /* its the same inode in both cases */
-	fqs->qs_incoredqs = atomic_read(&qd_lru_count);
+	fqs->qs_incoredqs = list_lru_count(&gfs2_qd_lru);
 	return 0;
 }
 
@@ -1573,10 +1618,12 @@
 	if (gfs2_is_stuffed(ip))
 		alloc_required = 1;
 	if (alloc_required) {
+		struct gfs2_alloc_parms ap = { .aflags = 0, };
 		gfs2_write_calc_reserv(ip, sizeof(struct gfs2_quota),
 				       &data_blocks, &ind_blocks);
 		blocks = 1 + data_blocks + ind_blocks;
-		error = gfs2_inplace_reserve(ip, blocks, 0);
+		ap.target = blocks;
+		error = gfs2_inplace_reserve(ip, &ap);
 		if (error)
 			goto out_i;
 		blocks += gfs2_rg_blocks(ip, blocks);
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 0f64d9d..96e4f34a 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -10,9 +10,10 @@
 #ifndef __QUOTA_DOT_H__
 #define __QUOTA_DOT_H__
 
+#include <linux/list_lru.h>
+
 struct gfs2_inode;
 struct gfs2_sbd;
-struct shrink_control;
 
 #define NO_UID_QUOTA_CHANGE INVALID_UID
 #define NO_GID_QUOTA_CHANGE INVALID_GID
@@ -53,10 +54,8 @@
 	return ret;
 }
 
-extern unsigned long gfs2_qd_shrink_count(struct shrinker *shrink,
-					  struct shrink_control *sc);
-extern unsigned long gfs2_qd_shrink_scan(struct shrinker *shrink,
-					 struct shrink_control *sc);
 extern const struct quotactl_ops gfs2_quotactl_ops;
+extern struct shrinker gfs2_qd_shrinker;
+extern struct list_lru gfs2_qd_lru;
 
 #endif /* __QUOTA_DOT_H__ */
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 6931743..4d83abd 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -81,11 +81,12 @@
 			       unsigned char new_state)
 {
 	unsigned char *byte1, *byte2, *end, cur_state;
-	unsigned int buflen = rbm->bi->bi_len;
+	struct gfs2_bitmap *bi = rbm_bi(rbm);
+	unsigned int buflen = bi->bi_len;
 	const unsigned int bit = (rbm->offset % GFS2_NBBY) * GFS2_BIT_SIZE;
 
-	byte1 = rbm->bi->bi_bh->b_data + rbm->bi->bi_offset + (rbm->offset / GFS2_NBBY);
-	end = rbm->bi->bi_bh->b_data + rbm->bi->bi_offset + buflen;
+	byte1 = bi->bi_bh->b_data + bi->bi_offset + (rbm->offset / GFS2_NBBY);
+	end = bi->bi_bh->b_data + bi->bi_offset + buflen;
 
 	BUG_ON(byte1 >= end);
 
@@ -95,18 +96,17 @@
 		printk(KERN_WARNING "GFS2: buf_blk = 0x%x old_state=%d, "
 		       "new_state=%d\n", rbm->offset, cur_state, new_state);
 		printk(KERN_WARNING "GFS2: rgrp=0x%llx bi_start=0x%x\n",
-		       (unsigned long long)rbm->rgd->rd_addr,
-		       rbm->bi->bi_start);
+		       (unsigned long long)rbm->rgd->rd_addr, bi->bi_start);
 		printk(KERN_WARNING "GFS2: bi_offset=0x%x bi_len=0x%x\n",
-		       rbm->bi->bi_offset, rbm->bi->bi_len);
+		       bi->bi_offset, bi->bi_len);
 		dump_stack();
 		gfs2_consist_rgrpd(rbm->rgd);
 		return;
 	}
 	*byte1 ^= (cur_state ^ new_state) << bit;
 
-	if (do_clone && rbm->bi->bi_clone) {
-		byte2 = rbm->bi->bi_clone + rbm->bi->bi_offset + (rbm->offset / GFS2_NBBY);
+	if (do_clone && bi->bi_clone) {
+		byte2 = bi->bi_clone + bi->bi_offset + (rbm->offset / GFS2_NBBY);
 		cur_state = (*byte2 >> bit) & GFS2_BIT_MASK;
 		*byte2 ^= (cur_state ^ new_state) << bit;
 	}
@@ -121,7 +121,8 @@
 
 static inline u8 gfs2_testbit(const struct gfs2_rbm *rbm)
 {
-	const u8 *buffer = rbm->bi->bi_bh->b_data + rbm->bi->bi_offset;
+	struct gfs2_bitmap *bi = rbm_bi(rbm);
+	const u8 *buffer = bi->bi_bh->b_data + bi->bi_offset;
 	const u8 *byte;
 	unsigned int bit;
 
@@ -252,29 +253,53 @@
 static int gfs2_rbm_from_block(struct gfs2_rbm *rbm, u64 block)
 {
 	u64 rblock = block - rbm->rgd->rd_data0;
-	u32 x;
 
 	if (WARN_ON_ONCE(rblock > UINT_MAX))
 		return -EINVAL;
 	if (block >= rbm->rgd->rd_data0 + rbm->rgd->rd_data)
 		return -E2BIG;
 
-	rbm->bi = rbm->rgd->rd_bits;
+	rbm->bii = 0;
 	rbm->offset = (u32)(rblock);
 	/* Check if the block is within the first block */
-	if (rbm->offset < (rbm->bi->bi_start + rbm->bi->bi_len) * GFS2_NBBY)
+	if (rbm->offset < rbm_bi(rbm)->bi_blocks)
 		return 0;
 
 	/* Adjust for the size diff between gfs2_meta_header and gfs2_rgrp */
 	rbm->offset += (sizeof(struct gfs2_rgrp) -
 			sizeof(struct gfs2_meta_header)) * GFS2_NBBY;
-	x = rbm->offset / rbm->rgd->rd_sbd->sd_blocks_per_bitmap;
-	rbm->offset -= x * rbm->rgd->rd_sbd->sd_blocks_per_bitmap;
-	rbm->bi += x;
+	rbm->bii = rbm->offset / rbm->rgd->rd_sbd->sd_blocks_per_bitmap;
+	rbm->offset -= rbm->bii * rbm->rgd->rd_sbd->sd_blocks_per_bitmap;
 	return 0;
 }
 
 /**
+ * gfs2_rbm_incr - increment an rbm structure
+ * @rbm: The rbm with rgd already set correctly
+ *
+ * This function takes an existing rbm structure and increments it to the next
+ * viable block offset.
+ *
+ * Returns: If incrementing the offset would cause the rbm to go past the
+ *          end of the rgrp, true is returned, otherwise false.
+ *
+ */
+
+static bool gfs2_rbm_incr(struct gfs2_rbm *rbm)
+{
+	if (rbm->offset + 1 < rbm_bi(rbm)->bi_blocks) { /* in the same bitmap */
+		rbm->offset++;
+		return false;
+	}
+	if (rbm->bii == rbm->rgd->rd_length - 1) /* at the last bitmap */
+		return true;
+
+	rbm->offset = 0;
+	rbm->bii++;
+	return false;
+}
+
+/**
  * gfs2_unaligned_extlen - Look for free blocks which are not byte aligned
  * @rbm: Position to search (value/result)
  * @n_unaligned: Number of unaligned blocks to check
@@ -285,7 +310,6 @@
 
 static bool gfs2_unaligned_extlen(struct gfs2_rbm *rbm, u32 n_unaligned, u32 *len)
 {
-	u64 block;
 	u32 n;
 	u8 res;
 
@@ -296,8 +320,7 @@
 		(*len)--;
 		if (*len == 0)
 			return true;
-		block = gfs2_rbm_to_block(rbm);
-		if (gfs2_rbm_from_block(rbm, block + 1))
+		if (gfs2_rbm_incr(rbm))
 			return true;
 	}
 
@@ -328,6 +351,7 @@
 	u32 chunk_size;
 	u8 *ptr, *start, *end;
 	u64 block;
+	struct gfs2_bitmap *bi;
 
 	if (n_unaligned &&
 	    gfs2_unaligned_extlen(&rbm, 4 - n_unaligned, &len))
@@ -336,11 +360,12 @@
 	n_unaligned = len & 3;
 	/* Start is now byte aligned */
 	while (len > 3) {
-		start = rbm.bi->bi_bh->b_data;
-		if (rbm.bi->bi_clone)
-			start = rbm.bi->bi_clone;
-		end = start + rbm.bi->bi_bh->b_size;
-		start += rbm.bi->bi_offset;
+		bi = rbm_bi(&rbm);
+		start = bi->bi_bh->b_data;
+		if (bi->bi_clone)
+			start = bi->bi_clone;
+		end = start + bi->bi_bh->b_size;
+		start += bi->bi_offset;
 		BUG_ON(rbm.offset & 3);
 		start += (rbm.offset / GFS2_NBBY);
 		bytes = min_t(u32, len / GFS2_NBBY, (end - start));
@@ -605,11 +630,13 @@
 	RB_CLEAR_NODE(&rs->rs_node);
 
 	if (rs->rs_free) {
+		struct gfs2_bitmap *bi = rbm_bi(&rs->rs_rbm);
+
 		/* return reserved blocks to the rgrp */
 		BUG_ON(rs->rs_rbm.rgd->rd_reserved < rs->rs_free);
 		rs->rs_rbm.rgd->rd_reserved -= rs->rs_free;
 		rs->rs_free = 0;
-		clear_bit(GBF_FULL, &rs->rs_rbm.bi->bi_flags);
+		clear_bit(GBF_FULL, &bi->bi_flags);
 		smp_mb__after_clear_bit();
 	}
 }
@@ -634,14 +661,13 @@
 /**
  * gfs2_rs_delete - delete a multi-block reservation
  * @ip: The inode for this reservation
+ * @wcount: The inode's write count, or NULL
  *
  */
-void gfs2_rs_delete(struct gfs2_inode *ip)
+void gfs2_rs_delete(struct gfs2_inode *ip, atomic_t *wcount)
 {
-	struct inode *inode = &ip->i_inode;
-
 	down_write(&ip->i_rw_mutex);
-	if (ip->i_res && atomic_read(&inode->i_writecount) <= 1) {
+	if (ip->i_res && ((wcount == NULL) || (atomic_read(wcount) <= 1))) {
 		gfs2_rs_deltree(ip->i_res);
 		BUG_ON(ip->i_res->rs_free);
 		kmem_cache_free(gfs2_rsrv_cachep, ip->i_res);
@@ -743,18 +769,21 @@
 			bi->bi_offset = sizeof(struct gfs2_rgrp);
 			bi->bi_start = 0;
 			bi->bi_len = bytes;
+			bi->bi_blocks = bytes * GFS2_NBBY;
 		/* header block */
 		} else if (x == 0) {
 			bytes = sdp->sd_sb.sb_bsize - sizeof(struct gfs2_rgrp);
 			bi->bi_offset = sizeof(struct gfs2_rgrp);
 			bi->bi_start = 0;
 			bi->bi_len = bytes;
+			bi->bi_blocks = bytes * GFS2_NBBY;
 		/* last block */
 		} else if (x + 1 == length) {
 			bytes = bytes_left;
 			bi->bi_offset = sizeof(struct gfs2_meta_header);
 			bi->bi_start = rgd->rd_bitbytes - bytes_left;
 			bi->bi_len = bytes;
+			bi->bi_blocks = bytes * GFS2_NBBY;
 		/* other blocks */
 		} else {
 			bytes = sdp->sd_sb.sb_bsize -
@@ -762,6 +791,7 @@
 			bi->bi_offset = sizeof(struct gfs2_meta_header);
 			bi->bi_start = rgd->rd_bitbytes - bytes_left;
 			bi->bi_len = bytes;
+			bi->bi_blocks = bytes * GFS2_NBBY;
 		}
 
 		bytes_left -= bytes;
@@ -1392,12 +1422,12 @@
  * rg_mblk_search - find a group of multiple free blocks to form a reservation
  * @rgd: the resource group descriptor
  * @ip: pointer to the inode for which we're reserving blocks
- * @requested: number of blocks required for this allocation
+ * @ap: the allocation parameters
  *
  */
 
 static void rg_mblk_search(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip,
-			   unsigned requested)
+			   const struct gfs2_alloc_parms *ap)
 {
 	struct gfs2_rbm rbm = { .rgd = rgd, };
 	u64 goal;
@@ -1410,7 +1440,7 @@
 	if (S_ISDIR(inode->i_mode))
 		extlen = 1;
 	else {
-		extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested);
+		extlen = max_t(u32, atomic_read(&rs->rs_sizehint), ap->target);
 		extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks);
 	}
 	if ((rgd->rd_free_clone < rgd->rd_reserved) || (free_blocks < extlen))
@@ -1554,14 +1584,14 @@
 			 const struct gfs2_inode *ip, bool nowrap)
 {
 	struct buffer_head *bh;
-	struct gfs2_bitmap *initial_bi;
+	int initial_bii;
 	u32 initial_offset;
 	u32 offset;
 	u8 *buffer;
-	int index;
 	int n = 0;
 	int iters = rbm->rgd->rd_length;
 	int ret;
+	struct gfs2_bitmap *bi;
 
 	/* If we are not starting at the beginning of a bitmap, then we
 	 * need to add one to the bitmap count to ensure that we search
@@ -1571,52 +1601,53 @@
 		iters++;
 
 	while(1) {
-		if (test_bit(GBF_FULL, &rbm->bi->bi_flags) &&
+		bi = rbm_bi(rbm);
+		if (test_bit(GBF_FULL, &bi->bi_flags) &&
 		    (state == GFS2_BLKST_FREE))
 			goto next_bitmap;
 
-		bh = rbm->bi->bi_bh;
-		buffer = bh->b_data + rbm->bi->bi_offset;
+		bh = bi->bi_bh;
+		buffer = bh->b_data + bi->bi_offset;
 		WARN_ON(!buffer_uptodate(bh));
-		if (state != GFS2_BLKST_UNLINKED && rbm->bi->bi_clone)
-			buffer = rbm->bi->bi_clone + rbm->bi->bi_offset;
+		if (state != GFS2_BLKST_UNLINKED && bi->bi_clone)
+			buffer = bi->bi_clone + bi->bi_offset;
 		initial_offset = rbm->offset;
-		offset = gfs2_bitfit(buffer, rbm->bi->bi_len, rbm->offset, state);
+		offset = gfs2_bitfit(buffer, bi->bi_len, rbm->offset, state);
 		if (offset == BFITNOENT)
 			goto bitmap_full;
 		rbm->offset = offset;
 		if (ip == NULL)
 			return 0;
 
-		initial_bi = rbm->bi;
+		initial_bii = rbm->bii;
 		ret = gfs2_reservation_check_and_update(rbm, ip, minext);
 		if (ret == 0)
 			return 0;
 		if (ret > 0) {
-			n += (rbm->bi - initial_bi);
+			n += (rbm->bii - initial_bii);
 			goto next_iter;
 		}
 		if (ret == -E2BIG) {
-			index = 0;
+			rbm->bii = 0;
 			rbm->offset = 0;
-			n += (rbm->bi - initial_bi);
+			n += (rbm->bii - initial_bii);
 			goto res_covered_end_of_rgrp;
 		}
 		return ret;
 
 bitmap_full:	/* Mark bitmap as full and fall through */
-		if ((state == GFS2_BLKST_FREE) && initial_offset == 0)
-			set_bit(GBF_FULL, &rbm->bi->bi_flags);
+		if ((state == GFS2_BLKST_FREE) && initial_offset == 0) {
+			struct gfs2_bitmap *bi = rbm_bi(rbm);
+			set_bit(GBF_FULL, &bi->bi_flags);
+		}
 
 next_bitmap:	/* Find next bitmap in the rgrp */
 		rbm->offset = 0;
-		index = rbm->bi - rbm->rgd->rd_bits;
-		index++;
-		if (index == rbm->rgd->rd_length)
-			index = 0;
+		rbm->bii++;
+		if (rbm->bii == rbm->rgd->rd_length)
+			rbm->bii = 0;
 res_covered_end_of_rgrp:
-		rbm->bi = &rbm->rgd->rd_bits[index];
-		if ((index == 0) && nowrap)
+		if ((rbm->bii == 0) && nowrap)
 			break;
 		n++;
 next_iter:
@@ -1645,7 +1676,7 @@
 	struct gfs2_inode *ip;
 	int error;
 	int found = 0;
-	struct gfs2_rbm rbm = { .rgd = rgd, .bi = rgd->rd_bits, .offset = 0 };
+	struct gfs2_rbm rbm = { .rgd = rgd, .bii = 0, .offset = 0 };
 
 	while (1) {
 		down_write(&sdp->sd_log_flush_lock);
@@ -1800,12 +1831,12 @@
 /**
  * gfs2_inplace_reserve - Reserve space in the filesystem
  * @ip: the inode to reserve space for
- * @requested: the number of blocks to be reserved
+ * @ap: the allocation parameters
  *
  * Returns: errno
  */
 
-int gfs2_inplace_reserve(struct gfs2_inode *ip, u32 requested, u32 aflags)
+int gfs2_inplace_reserve(struct gfs2_inode *ip, const struct gfs2_alloc_parms *ap)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct gfs2_rgrpd *begin = NULL;
@@ -1817,17 +1848,16 @@
 
 	if (sdp->sd_args.ar_rgrplvb)
 		flags |= GL_SKIP;
-	if (gfs2_assert_warn(sdp, requested))
+	if (gfs2_assert_warn(sdp, ap->target))
 		return -EINVAL;
 	if (gfs2_rs_active(rs)) {
 		begin = rs->rs_rbm.rgd;
-		flags = 0; /* Yoda: Do or do not. There is no try */
 	} else if (ip->i_rgd && rgrp_contains_block(ip->i_rgd, ip->i_goal)) {
 		rs->rs_rbm.rgd = begin = ip->i_rgd;
 	} else {
 		rs->rs_rbm.rgd = begin = gfs2_blk2rgrpd(sdp, ip->i_goal, 1);
 	}
-	if (S_ISDIR(ip->i_inode.i_mode) && (aflags & GFS2_AF_ORLOV))
+	if (S_ISDIR(ip->i_inode.i_mode) && (ap->aflags & GFS2_AF_ORLOV))
 		skip = gfs2_orlov_skip(ip);
 	if (rs->rs_rbm.rgd == NULL)
 		return -EBADSLT;
@@ -1869,14 +1899,14 @@
 
 		/* Get a reservation if we don't already have one */
 		if (!gfs2_rs_active(rs))
-			rg_mblk_search(rs->rs_rbm.rgd, ip, requested);
+			rg_mblk_search(rs->rs_rbm.rgd, ip, ap);
 
 		/* Skip rgrps when we can't get a reservation on first pass */
 		if (!gfs2_rs_active(rs) && (loops < 1))
 			goto check_rgrp;
 
 		/* If rgrp has enough free space, use it */
-		if (rs->rs_rbm.rgd->rd_free_clone >= requested) {
+		if (rs->rs_rbm.rgd->rd_free_clone >= ap->target) {
 			ip->i_rgd = rs->rs_rbm.rgd;
 			return 0;
 		}
@@ -1973,14 +2003,14 @@
 
 	*n = 1;
 	block = gfs2_rbm_to_block(rbm);
-	gfs2_trans_add_meta(rbm->rgd->rd_gl, rbm->bi->bi_bh);
+	gfs2_trans_add_meta(rbm->rgd->rd_gl, rbm_bi(rbm)->bi_bh);
 	gfs2_setbit(rbm, true, dinode ? GFS2_BLKST_DINODE : GFS2_BLKST_USED);
 	block++;
 	while (*n < elen) {
 		ret = gfs2_rbm_from_block(&pos, block);
 		if (ret || gfs2_testbit(&pos) != GFS2_BLKST_FREE)
 			break;
-		gfs2_trans_add_meta(pos.rgd->rd_gl, pos.bi->bi_bh);
+		gfs2_trans_add_meta(pos.rgd->rd_gl, rbm_bi(&pos)->bi_bh);
 		gfs2_setbit(&pos, true, GFS2_BLKST_USED);
 		(*n)++;
 		block++;
@@ -2001,6 +2031,7 @@
 				     u32 blen, unsigned char new_state)
 {
 	struct gfs2_rbm rbm;
+	struct gfs2_bitmap *bi;
 
 	rbm.rgd = gfs2_blk2rgrpd(sdp, bstart, 1);
 	if (!rbm.rgd) {
@@ -2011,15 +2042,15 @@
 
 	while (blen--) {
 		gfs2_rbm_from_block(&rbm, bstart);
+		bi = rbm_bi(&rbm);
 		bstart++;
-		if (!rbm.bi->bi_clone) {
-			rbm.bi->bi_clone = kmalloc(rbm.bi->bi_bh->b_size,
-						   GFP_NOFS | __GFP_NOFAIL);
-			memcpy(rbm.bi->bi_clone + rbm.bi->bi_offset,
-			       rbm.bi->bi_bh->b_data + rbm.bi->bi_offset,
-			       rbm.bi->bi_len);
+		if (!bi->bi_clone) {
+			bi->bi_clone = kmalloc(bi->bi_bh->b_size,
+					       GFP_NOFS | __GFP_NOFAIL);
+			memcpy(bi->bi_clone + bi->bi_offset,
+			       bi->bi_bh->b_data + bi->bi_offset, bi->bi_len);
 		}
-		gfs2_trans_add_meta(rbm.rgd->rd_gl, rbm.bi->bi_bh);
+		gfs2_trans_add_meta(rbm.rgd->rd_gl, bi->bi_bh);
 		gfs2_setbit(&rbm, false, new_state);
 	}
 
@@ -2103,6 +2134,35 @@
 }
 
 /**
+ * gfs2_set_alloc_start - Set starting point for block allocation
+ * @rbm: The rbm which will be set to the required location
+ * @ip: The gfs2 inode
+ * @dinode: Flag to say if allocation includes a new inode
+ *
+ * This sets the starting point from the reservation if one is active
+ * otherwise it falls back to guessing a start point based on the
+ * inode's goal block or the last allocation point in the rgrp.
+ */
+
+static void gfs2_set_alloc_start(struct gfs2_rbm *rbm,
+				 const struct gfs2_inode *ip, bool dinode)
+{
+	u64 goal;
+
+	if (gfs2_rs_active(ip->i_res)) {
+		*rbm = ip->i_res->rs_rbm;
+		return;
+	}
+
+	if (!dinode && rgrp_contains_block(rbm->rgd, ip->i_goal))
+		goal = ip->i_goal;
+	else
+		goal = rbm->rgd->rd_last_alloc + rbm->rgd->rd_data0;
+
+	gfs2_rbm_from_block(rbm, goal);
+}
+
+/**
  * gfs2_alloc_blocks - Allocate one or more blocks of data and/or a dinode
  * @ip: the inode to allocate the block for
  * @bn: Used to return the starting block number
@@ -2120,22 +2180,14 @@
 	struct buffer_head *dibh;
 	struct gfs2_rbm rbm = { .rgd = ip->i_rgd, };
 	unsigned int ndata;
-	u64 goal;
 	u64 block; /* block, within the file system scope */
 	int error;
 
-	if (gfs2_rs_active(ip->i_res))
-		goal = gfs2_rbm_to_block(&ip->i_res->rs_rbm);
-	else if (!dinode && rgrp_contains_block(rbm.rgd, ip->i_goal))
-		goal = ip->i_goal;
-	else
-		goal = rbm.rgd->rd_last_alloc + rbm.rgd->rd_data0;
-
-	gfs2_rbm_from_block(&rbm, goal);
+	gfs2_set_alloc_start(&rbm, ip, dinode);
 	error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, 0, ip, false);
 
 	if (error == -ENOSPC) {
-		gfs2_rbm_from_block(&rbm, goal);
+		gfs2_set_alloc_start(&rbm, ip, dinode);
 		error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, 0, NULL, false);
 	}
 
diff --git a/fs/gfs2/rgrp.h b/fs/gfs2/rgrp.h
index 5b3f4a8..3a10d2f 100644
--- a/fs/gfs2/rgrp.h
+++ b/fs/gfs2/rgrp.h
@@ -40,7 +40,7 @@
 extern struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip);
 
 #define GFS2_AF_ORLOV 1
-extern int gfs2_inplace_reserve(struct gfs2_inode *ip, u32 requested, u32 flags);
+extern int gfs2_inplace_reserve(struct gfs2_inode *ip, const struct gfs2_alloc_parms *ap);
 extern void gfs2_inplace_release(struct gfs2_inode *ip);
 
 extern int gfs2_alloc_blocks(struct gfs2_inode *ip, u64 *bn, unsigned int *n,
@@ -48,7 +48,7 @@
 
 extern int gfs2_rs_alloc(struct gfs2_inode *ip);
 extern void gfs2_rs_deltree(struct gfs2_blkreserv *rs);
-extern void gfs2_rs_delete(struct gfs2_inode *ip);
+extern void gfs2_rs_delete(struct gfs2_inode *ip, atomic_t *wcount);
 extern void __gfs2_free_blocks(struct gfs2_inode *ip, u64 bstart, u32 blen, int meta);
 extern void gfs2_free_meta(struct gfs2_inode *ip, u64 bstart, u32 blen);
 extern void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip);
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index e5639de..35da5b1 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1526,7 +1526,7 @@
 out:
 	/* Case 3 starts here */
 	truncate_inode_pages(&inode->i_data, 0);
-	gfs2_rs_delete(ip);
+	gfs2_rs_delete(ip, NULL);
 	gfs2_ordered_del_inode(ip);
 	clear_inode(inode);
 	gfs2_dir_hash_inval(ip);
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index aa5c480..d09f6ed 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -587,7 +587,6 @@
 TUNE_ATTR(complain_secs, 0);
 TUNE_ATTR(statfs_slow, 0);
 TUNE_ATTR(new_files_jdata, 0);
-TUNE_ATTR(quota_simul_sync, 1);
 TUNE_ATTR(statfs_quantum, 1);
 TUNE_ATTR_3(quota_scale, quota_scale_show, quota_scale_store);
 
@@ -597,7 +596,6 @@
 	&tune_attr_max_readahead.attr,
 	&tune_attr_complain_secs.attr,
 	&tune_attr_statfs_slow.attr,
-	&tune_attr_quota_simul_sync.attr,
 	&tune_attr_statfs_quantum.attr,
 	&tune_attr_quota_scale.attr,
 	&tune_attr_new_files_jdata.attr,
diff --git a/fs/gfs2/util.c b/fs/gfs2/util.c
index 6402fb6..f7109f6 100644
--- a/fs/gfs2/util.c
+++ b/fs/gfs2/util.c
@@ -268,23 +268,3 @@
 	return rv;
 }
 
-void gfs2_icbit_munge(struct gfs2_sbd *sdp, unsigned char **bitmap,
-		      unsigned int bit, int new_value)
-{
-	unsigned int c, o, b = bit;
-	int old_value;
-
-	c = b / (8 * PAGE_SIZE);
-	b %= 8 * PAGE_SIZE;
-	o = b / 8;
-	b %= 8;
-
-	old_value = (bitmap[c][o] & (1 << b));
-	gfs2_assert_withdraw(sdp, !old_value != !new_value);
-
-	if (new_value)
-		bitmap[c][o] |= 1 << b;
-	else
-		bitmap[c][o] &= ~(1 << b);
-}
-
diff --git a/fs/gfs2/util.h b/fs/gfs2/util.h
index 8053573..b7ffb09 100644
--- a/fs/gfs2/util.h
+++ b/fs/gfs2/util.h
@@ -164,8 +164,6 @@
 #define gfs2_tune_get(sdp, field) \
 gfs2_tune_get_i(&(sdp)->sd_tune, &(sdp)->sd_tune.field)
 
-void gfs2_icbit_munge(struct gfs2_sbd *sdp, unsigned char **bitmap,
-		      unsigned int bit, int new_value);
 int gfs2_lm_withdraw(struct gfs2_sbd *sdp, char *fmt, ...);
 
 #endif /* __UTIL_DOT_H__ */
diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c
index ecd37f3..8c6a6f6 100644
--- a/fs/gfs2/xattr.c
+++ b/fs/gfs2/xattr.c
@@ -723,6 +723,7 @@
 			     unsigned int blks,
 			     ea_skeleton_call_t skeleton_call, void *private)
 {
+	struct gfs2_alloc_parms ap = { .target = blks };
 	struct buffer_head *dibh;
 	int error;
 
@@ -734,7 +735,7 @@
 	if (error)
 		return error;
 
-	error = gfs2_inplace_reserve(ip, blks, 0);
+	error = gfs2_inplace_reserve(ip, &ap);
 	if (error)
 		goto out_gunlock_q;
 
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
index b5e80b0..38c1768 100644
--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -140,6 +140,17 @@
 	  If the NFS client is unchanged from the upstream kernel, this
 	  option should be set to the default "kernel.org".
 
+config NFS_V4_1_MIGRATION
+	bool "NFSv4.1 client support for migration"
+	depends on NFS_V4_1
+	default n
+	help
+	  This option makes the NFS client advertise to NFSv4.1 servers that
+          it can support NFSv4 migration.
+
+          The NFSv4.1 pieces of the Linux NFSv4 migration implementation are
+          still experimental.  If you are not an NFSv4 developer, say N here.
+
 config NFS_V4_SECURITY_LABEL
 	bool
 	depends on NFS_V4_2 && SECURITY
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 67cd732..073b4cf 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -164,8 +164,7 @@
 		svc_xprt_put(serv->sv_bc_xprt);
 		serv->sv_bc_xprt = NULL;
 	}
-	dprintk("--> %s return %ld\n", __func__,
-		IS_ERR(rqstp) ? PTR_ERR(rqstp) : 0);
+	dprintk("--> %s return %d\n", __func__, PTR_ERR_OR_ZERO(rqstp));
 	return rqstp;
 }
 
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 2dceee4..1d09289 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -590,6 +590,8 @@
 
 	if (test_bit(NFS_CS_DISCRTRY, &clp->cl_flags))
 		args.flags |= RPC_CLNT_CREATE_DISCRTRY;
+	if (test_bit(NFS_CS_NO_RETRANS_TIMEOUT, &clp->cl_flags))
+		args.flags |= RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT;
 	if (test_bit(NFS_CS_NORESVPORT, &clp->cl_flags))
 		args.flags |= RPC_CLNT_CREATE_NONPRIVPORT;
 	if (test_bit(NFS_CS_INFINITE_SLOTS, &clp->cl_flags))
@@ -784,8 +786,10 @@
 		goto error;
 
 	server->port = data->nfs_server.port;
+	server->auth_info = data->auth_info;
 
-	error = nfs_init_server_rpcclient(server, &timeparms, data->auth_flavors[0]);
+	error = nfs_init_server_rpcclient(server, &timeparms,
+					  data->selected_flavor);
 	if (error < 0)
 		goto error;
 
@@ -926,6 +930,7 @@
 	target->acdirmax = source->acdirmax;
 	target->caps = source->caps;
 	target->options = source->options;
+	target->auth_info = source->auth_info;
 }
 EXPORT_SYMBOL_GPL(nfs_server_copy_userdata);
 
@@ -943,7 +948,7 @@
 }
 EXPORT_SYMBOL_GPL(nfs_server_insert_lists);
 
-static void nfs_server_remove_lists(struct nfs_server *server)
+void nfs_server_remove_lists(struct nfs_server *server)
 {
 	struct nfs_client *clp = server->nfs_client;
 	struct nfs_net *nn;
@@ -960,6 +965,7 @@
 
 	synchronize_rcu();
 }
+EXPORT_SYMBOL_GPL(nfs_server_remove_lists);
 
 /*
  * Allocate and initialise a server record
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 02b0df7..9a8676f 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1139,7 +1139,13 @@
 	if (inode && S_ISDIR(inode->i_mode)) {
 		/* Purge readdir caches. */
 		nfs_zap_caches(inode);
-		if (dentry->d_flags & DCACHE_DISCONNECTED)
+		/*
+		 * We can't d_drop the root of a disconnected tree:
+		 * its d_hash is on the s_anon list and d_drop() would hide
+		 * it from shrink_dcache_for_unmount(), leading to busy
+		 * inodes on unmount and further oopses.
+		 */
+		if (IS_ROOT(dentry))
 			goto out_valid;
 	}
 	/* If we have submounts, don't unhash ! */
@@ -1381,7 +1387,7 @@
 
 static int do_open(struct inode *inode, struct file *filp)
 {
-	nfs_fscache_set_inode_cookie(inode, filp);
+	nfs_fscache_open_file(inode, filp);
 	return 0;
 }
 
diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index 24d1d1c..3ef01f0 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -39,7 +39,7 @@
 	/* create a cache index for looking up filehandles */
 	clp->fscache = fscache_acquire_cookie(nfs_fscache_netfs.primary_index,
 					      &nfs_fscache_server_index_def,
-					      clp);
+					      clp, true);
 	dfprintk(FSCACHE, "NFS: get client cookie (0x%p/0x%p)\n",
 		 clp, clp->fscache);
 }
@@ -139,7 +139,7 @@
 	/* create a cache index for looking up filehandles */
 	nfss->fscache = fscache_acquire_cookie(nfss->nfs_client->fscache,
 					       &nfs_fscache_super_index_def,
-					       nfss);
+					       nfss, true);
 	dfprintk(FSCACHE, "NFS: get superblock cookie (0x%p/0x%p)\n",
 		 nfss, nfss->fscache);
 	return;
@@ -178,163 +178,79 @@
 /*
  * Initialise the per-inode cache cookie pointer for an NFS inode.
  */
-void nfs_fscache_init_inode_cookie(struct inode *inode)
+void nfs_fscache_init_inode(struct inode *inode)
 {
-	NFS_I(inode)->fscache = NULL;
-	if (S_ISREG(inode->i_mode))
-		set_bit(NFS_INO_FSCACHE, &NFS_I(inode)->flags);
-}
-
-/*
- * Get the per-inode cache cookie for an NFS inode.
- */
-static void nfs_fscache_enable_inode_cookie(struct inode *inode)
-{
-	struct super_block *sb = inode->i_sb;
 	struct nfs_inode *nfsi = NFS_I(inode);
 
-	if (nfsi->fscache || !NFS_FSCACHE(inode))
+	nfsi->fscache = NULL;
+	if (!S_ISREG(inode->i_mode))
 		return;
-
-	if ((NFS_SB(sb)->options & NFS_OPTION_FSCACHE)) {
-		nfsi->fscache = fscache_acquire_cookie(
-			NFS_SB(sb)->fscache,
-			&nfs_fscache_inode_object_def,
-			nfsi);
-
-		dfprintk(FSCACHE, "NFS: get FH cookie (0x%p/0x%p/0x%p)\n",
-			 sb, nfsi, nfsi->fscache);
-	}
+	nfsi->fscache = fscache_acquire_cookie(NFS_SB(inode->i_sb)->fscache,
+					       &nfs_fscache_inode_object_def,
+					       nfsi, false);
 }
 
 /*
  * Release a per-inode cookie.
  */
-void nfs_fscache_release_inode_cookie(struct inode *inode)
+void nfs_fscache_clear_inode(struct inode *inode)
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
+	struct fscache_cookie *cookie = nfs_i_fscache(inode);
 
-	dfprintk(FSCACHE, "NFS: clear cookie (0x%p/0x%p)\n",
-		 nfsi, nfsi->fscache);
+	dfprintk(FSCACHE, "NFS: clear cookie (0x%p/0x%p)\n", nfsi, cookie);
 
-	fscache_relinquish_cookie(nfsi->fscache, 0);
+	fscache_relinquish_cookie(cookie, false);
 	nfsi->fscache = NULL;
 }
 
-/*
- * Retire a per-inode cookie, destroying the data attached to it.
- */
-void nfs_fscache_zap_inode_cookie(struct inode *inode)
+static bool nfs_fscache_can_enable(void *data)
 {
-	struct nfs_inode *nfsi = NFS_I(inode);
+	struct inode *inode = data;
 
-	dfprintk(FSCACHE, "NFS: zapping cookie (0x%p/0x%p)\n",
-		 nfsi, nfsi->fscache);
-
-	fscache_relinquish_cookie(nfsi->fscache, 1);
-	nfsi->fscache = NULL;
+	return !inode_is_open_for_write(inode);
 }
 
 /*
- * Turn off the cache with regard to a per-inode cookie if opened for writing,
- * invalidating all the pages in the page cache relating to the associated
- * inode to clear the per-page caching.
+ * Enable or disable caching for a file that is being opened as appropriate.
+ * The cookie is allocated when the inode is initialised, but is not enabled at
+ * that time.  Enablement is deferred to file-open time to avoid stat() and
+ * access() thrashing the cache.
+ *
+ * For now, with NFS, only regular files that are open read-only will be able
+ * to use the cache.
+ *
+ * We enable the cache for an inode if we open it read-only and it isn't
+ * currently open for writing.  We disable the cache if the inode is open
+ * write-only.
+ *
+ * The caller uses the file struct to pin i_writecount on the inode before
+ * calling us when a file is opened for writing, so we can make use of that.
+ *
+ * Note that this may be invoked multiple times in parallel by parallel
+ * nfs_open() functions.
  */
-static void nfs_fscache_disable_inode_cookie(struct inode *inode)
+void nfs_fscache_open_file(struct inode *inode, struct file *filp)
 {
-	clear_bit(NFS_INO_FSCACHE, &NFS_I(inode)->flags);
+	struct nfs_inode *nfsi = NFS_I(inode);
+	struct fscache_cookie *cookie = nfs_i_fscache(inode);
 
-	if (NFS_I(inode)->fscache) {
-		dfprintk(FSCACHE,
-			 "NFS: nfsi 0x%p turning cache off\n", NFS_I(inode));
+	if (!fscache_cookie_valid(cookie))
+		return;
 
-		/* Need to uncache any pages attached to this inode that
-		 * fscache knows about before turning off the cache.
-		 */
-		fscache_uncache_all_inode_pages(NFS_I(inode)->fscache, inode);
-		nfs_fscache_zap_inode_cookie(inode);
+	if (inode_is_open_for_write(inode)) {
+		dfprintk(FSCACHE, "NFS: nfsi 0x%p disabling cache\n", nfsi);
+		clear_bit(NFS_INO_FSCACHE, &nfsi->flags);
+		fscache_disable_cookie(cookie, true);
+		fscache_uncache_all_inode_pages(cookie, inode);
+	} else {
+		dfprintk(FSCACHE, "NFS: nfsi 0x%p enabling cache\n", nfsi);
+		fscache_enable_cookie(cookie, nfs_fscache_can_enable, inode);
+		if (fscache_cookie_enabled(cookie))
+			set_bit(NFS_INO_FSCACHE, &NFS_I(inode)->flags);
 	}
 }
-
-/*
- * wait_on_bit() sleep function for uninterruptible waiting
- */
-static int nfs_fscache_wait_bit(void *flags)
-{
-	schedule();
-	return 0;
-}
-
-/*
- * Lock against someone else trying to also acquire or relinquish a cookie
- */
-static inline void nfs_fscache_inode_lock(struct inode *inode)
-{
-	struct nfs_inode *nfsi = NFS_I(inode);
-
-	while (test_and_set_bit(NFS_INO_FSCACHE_LOCK, &nfsi->flags))
-		wait_on_bit(&nfsi->flags, NFS_INO_FSCACHE_LOCK,
-			    nfs_fscache_wait_bit, TASK_UNINTERRUPTIBLE);
-}
-
-/*
- * Unlock cookie management lock
- */
-static inline void nfs_fscache_inode_unlock(struct inode *inode)
-{
-	struct nfs_inode *nfsi = NFS_I(inode);
-
-	smp_mb__before_clear_bit();
-	clear_bit(NFS_INO_FSCACHE_LOCK, &nfsi->flags);
-	smp_mb__after_clear_bit();
-	wake_up_bit(&nfsi->flags, NFS_INO_FSCACHE_LOCK);
-}
-
-/*
- * Decide if we should enable or disable local caching for this inode.
- * - For now, with NFS, only regular files that are open read-only will be able
- *   to use the cache.
- * - May be invoked multiple times in parallel by parallel nfs_open() functions.
- */
-void nfs_fscache_set_inode_cookie(struct inode *inode, struct file *filp)
-{
-	if (NFS_FSCACHE(inode)) {
-		nfs_fscache_inode_lock(inode);
-		if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
-			nfs_fscache_disable_inode_cookie(inode);
-		else
-			nfs_fscache_enable_inode_cookie(inode);
-		nfs_fscache_inode_unlock(inode);
-	}
-}
-EXPORT_SYMBOL_GPL(nfs_fscache_set_inode_cookie);
-
-/*
- * Replace a per-inode cookie due to revalidation detecting a file having
- * changed on the server.
- */
-void nfs_fscache_reset_inode_cookie(struct inode *inode)
-{
-	struct nfs_inode *nfsi = NFS_I(inode);
-	struct nfs_server *nfss = NFS_SERVER(inode);
-	NFS_IFDEBUG(struct fscache_cookie *old = nfsi->fscache);
-
-	nfs_fscache_inode_lock(inode);
-	if (nfsi->fscache) {
-		/* retire the current fscache cache and get a new one */
-		fscache_relinquish_cookie(nfsi->fscache, 1);
-
-		nfsi->fscache = fscache_acquire_cookie(
-			nfss->nfs_client->fscache,
-			&nfs_fscache_inode_object_def,
-			nfsi);
-
-		dfprintk(FSCACHE,
-			 "NFS: revalidation new cookie (0x%p/0x%p/0x%p/0x%p)\n",
-			 nfss, nfsi, old, nfsi->fscache);
-	}
-	nfs_fscache_inode_unlock(inode);
-}
+EXPORT_SYMBOL_GPL(nfs_fscache_open_file);
 
 /*
  * Release the caching state associated with a page, if the page isn't busy
@@ -344,12 +260,11 @@
 int nfs_fscache_release_page(struct page *page, gfp_t gfp)
 {
 	if (PageFsCache(page)) {
-		struct nfs_inode *nfsi = NFS_I(page->mapping->host);
-		struct fscache_cookie *cookie = nfsi->fscache;
+		struct fscache_cookie *cookie = nfs_i_fscache(page->mapping->host);
 
 		BUG_ON(!cookie);
 		dfprintk(FSCACHE, "NFS: fscache releasepage (0x%p/0x%p/0x%p)\n",
-			 cookie, page, nfsi);
+			 cookie, page, NFS_I(page->mapping->host));
 
 		if (!fscache_maybe_release_page(cookie, page, gfp))
 			return 0;
@@ -367,13 +282,12 @@
  */
 void __nfs_fscache_invalidate_page(struct page *page, struct inode *inode)
 {
-	struct nfs_inode *nfsi = NFS_I(inode);
-	struct fscache_cookie *cookie = nfsi->fscache;
+	struct fscache_cookie *cookie = nfs_i_fscache(inode);
 
 	BUG_ON(!cookie);
 
 	dfprintk(FSCACHE, "NFS: fscache invalidatepage (0x%p/0x%p/0x%p)\n",
-		 cookie, page, nfsi);
+		 cookie, page, NFS_I(inode));
 
 	fscache_wait_on_page_write(cookie, page);
 
@@ -417,9 +331,9 @@
 
 	dfprintk(FSCACHE,
 		 "NFS: readpage_from_fscache(fsc:%p/p:%p(i:%lx f:%lx)/0x%p)\n",
-		 NFS_I(inode)->fscache, page, page->index, page->flags, inode);
+		 nfs_i_fscache(inode), page, page->index, page->flags, inode);
 
-	ret = fscache_read_or_alloc_page(NFS_I(inode)->fscache,
+	ret = fscache_read_or_alloc_page(nfs_i_fscache(inode),
 					 page,
 					 nfs_readpage_from_fscache_complete,
 					 ctx,
@@ -459,9 +373,9 @@
 	int ret;
 
 	dfprintk(FSCACHE, "NFS: nfs_getpages_from_fscache (0x%p/%u/0x%p)\n",
-		 NFS_I(inode)->fscache, npages, inode);
+		 nfs_i_fscache(inode), npages, inode);
 
-	ret = fscache_read_or_alloc_pages(NFS_I(inode)->fscache,
+	ret = fscache_read_or_alloc_pages(nfs_i_fscache(inode),
 					  mapping, pages, nr_pages,
 					  nfs_readpage_from_fscache_complete,
 					  ctx,
@@ -506,15 +420,15 @@
 
 	dfprintk(FSCACHE,
 		 "NFS: readpage_to_fscache(fsc:%p/p:%p(i:%lx f:%lx)/%d)\n",
-		 NFS_I(inode)->fscache, page, page->index, page->flags, sync);
+		 nfs_i_fscache(inode), page, page->index, page->flags, sync);
 
-	ret = fscache_write_page(NFS_I(inode)->fscache, page, GFP_KERNEL);
+	ret = fscache_write_page(nfs_i_fscache(inode), page, GFP_KERNEL);
 	dfprintk(FSCACHE,
 		 "NFS:     readpage_to_fscache: p:%p(i:%lu f:%lx) ret %d\n",
 		 page, page->index, page->flags, ret);
 
 	if (ret != 0) {
-		fscache_uncache_page(NFS_I(inode)->fscache, page);
+		fscache_uncache_page(nfs_i_fscache(inode), page);
 		nfs_add_fscache_stats(inode,
 				      NFSIOS_FSCACHE_PAGES_WRITTEN_FAIL, 1);
 		nfs_add_fscache_stats(inode, NFSIOS_FSCACHE_PAGES_UNCACHED, 1);
diff --git a/fs/nfs/fscache.h b/fs/nfs/fscache.h
index 4ecb766..d7fe3e7 100644
--- a/fs/nfs/fscache.h
+++ b/fs/nfs/fscache.h
@@ -76,11 +76,9 @@
 extern void nfs_fscache_get_super_cookie(struct super_block *, const char *, int);
 extern void nfs_fscache_release_super_cookie(struct super_block *);
 
-extern void nfs_fscache_init_inode_cookie(struct inode *);
-extern void nfs_fscache_release_inode_cookie(struct inode *);
-extern void nfs_fscache_zap_inode_cookie(struct inode *);
-extern void nfs_fscache_set_inode_cookie(struct inode *, struct file *);
-extern void nfs_fscache_reset_inode_cookie(struct inode *);
+extern void nfs_fscache_init_inode(struct inode *);
+extern void nfs_fscache_clear_inode(struct inode *);
+extern void nfs_fscache_open_file(struct inode *, struct file *);
 
 extern void __nfs_fscache_invalidate_page(struct page *, struct inode *);
 extern int nfs_fscache_release_page(struct page *, gfp_t);
@@ -187,12 +185,10 @@
 
 static inline void nfs_fscache_release_super_cookie(struct super_block *sb) {}
 
-static inline void nfs_fscache_init_inode_cookie(struct inode *inode) {}
-static inline void nfs_fscache_release_inode_cookie(struct inode *inode) {}
-static inline void nfs_fscache_zap_inode_cookie(struct inode *inode) {}
-static inline void nfs_fscache_set_inode_cookie(struct inode *inode,
-						struct file *filp) {}
-static inline void nfs_fscache_reset_inode_cookie(struct inode *inode) {}
+static inline void nfs_fscache_init_inode(struct inode *inode) {}
+static inline void nfs_fscache_clear_inode(struct inode *inode) {}
+static inline void nfs_fscache_open_file(struct inode *inode,
+					 struct file *filp) {}
 
 static inline int nfs_fscache_release_page(struct page *page, gfp_t gfp)
 {
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index eda8879..18ab2da 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -122,7 +122,7 @@
 	WARN_ON_ONCE(!list_empty(&NFS_I(inode)->open_files));
 	nfs_zap_acl_cache(inode);
 	nfs_access_zap_cache(inode);
-	nfs_fscache_release_inode_cookie(inode);
+	nfs_fscache_clear_inode(inode);
 }
 EXPORT_SYMBOL_GPL(nfs_clear_inode);
 
@@ -274,12 +274,6 @@
 	if (label == NULL)
 		return;
 
-	if (nfs_server_capable(inode, NFS_CAP_SECURITY_LABEL) == 0)
-		return;
-
-	if (NFS_SERVER(inode)->nfs_client->cl_minorversion < 2)
-		return;
-
 	if ((fattr->valid & NFS_ATTR_FATTR_V4_SECURITY_LABEL) && inode->i_security) {
 		error = security_inode_notifysecctx(inode, label->label,
 				label->len);
@@ -459,7 +453,7 @@
 		nfsi->attrtimeo_timestamp = now;
 		nfsi->access_cache = RB_ROOT;
 
-		nfs_fscache_init_inode_cookie(inode);
+		nfs_fscache_init_inode(inode);
 
 		unlock_new_inode(inode);
 	} else
@@ -854,7 +848,7 @@
 		return PTR_ERR(ctx);
 	nfs_file_set_open_context(filp, ctx);
 	put_nfs_open_context(ctx);
-	nfs_fscache_set_inode_cookie(inode, filp);
+	nfs_fscache_open_file(inode, filp);
 	return 0;
 }
 
@@ -923,6 +917,8 @@
 	if (nfsi->cache_validity & NFS_INO_INVALID_ACL)
 		nfs_zap_acl_cache(inode);
 
+	nfs_setsecurity(inode, fattr, label);
+
 	dfprintk(PAGECACHE, "NFS: (%s/%Ld) revalidation complete\n",
 		inode->i_sb->s_id,
 		(long long)NFS_FILEID(inode));
@@ -1209,6 +1205,7 @@
 	 * not on the result */
 	return nfs_fhandle_hash(fh);
 }
+EXPORT_SYMBOL_GPL(_nfs_display_fhandle_hash);
 
 /*
  * _nfs_display_fhandle - display an NFS file handle on the console
@@ -1253,6 +1250,7 @@
 		}
 	}
 }
+EXPORT_SYMBOL_GPL(_nfs_display_fhandle);
 #endif
 
 /**
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index 38da8c2..bca6a3e 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -88,8 +88,8 @@
 	unsigned int		namlen;
 	unsigned int		options;
 	unsigned int		bsize;
-	unsigned int		auth_flavor_len;
-	rpc_authflavor_t	auth_flavors[1];
+	struct nfs_auth_info	auth_info;
+	rpc_authflavor_t	selected_flavor;
 	char			*client_address;
 	unsigned int		version;
 	unsigned int		minorversion;
@@ -154,6 +154,7 @@
 				  rpc_authflavor_t);
 int nfs_probe_fsinfo(struct nfs_server *server, struct nfs_fh *, struct nfs_fattr *);
 void nfs_server_insert_lists(struct nfs_server *);
+void nfs_server_remove_lists(struct nfs_server *);
 void nfs_init_timeout_values(struct rpc_timeout *, int, unsigned int, unsigned int);
 int nfs_init_server_rpcclient(struct nfs_server *, const struct rpc_timeout *t,
 		rpc_authflavor_t);
@@ -174,6 +175,8 @@
 					struct nfs_subversion *);
 extern struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *,
 						      struct nfs_fh *);
+extern int nfs4_update_server(struct nfs_server *server, const char *hostname,
+					struct sockaddr *sap, size_t salen);
 extern void nfs_free_server(struct nfs_server *server);
 extern struct nfs_server *nfs_clone_server(struct nfs_server *,
 					   struct nfs_fh *,
@@ -323,6 +326,7 @@
 extern struct file_system_type nfs4_xdev_fs_type;
 extern struct file_system_type nfs4_referral_fs_type;
 #endif
+bool nfs_auth_info_match(const struct nfs_auth_info *, rpc_authflavor_t);
 struct dentry *nfs_try_mount(int, const char *, struct nfs_mount_info *,
 			struct nfs_subversion *);
 void nfs_initialise_sb(struct super_block *);
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 28842ab..3ce79b0 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -29,6 +29,8 @@
 	NFS4CLNT_SERVER_SCOPE_MISMATCH,
 	NFS4CLNT_PURGE_STATE,
 	NFS4CLNT_BIND_CONN_TO_SESSION,
+	NFS4CLNT_MOVED,
+	NFS4CLNT_LEASE_MOVED,
 };
 
 #define NFS4_RENEW_TIMEOUT		0x01
@@ -50,6 +52,7 @@
 	const struct nfs4_state_recovery_ops *reboot_recovery_ops;
 	const struct nfs4_state_recovery_ops *nograce_recovery_ops;
 	const struct nfs4_state_maintenance_ops *state_renewal_ops;
+	const struct nfs4_mig_recovery_ops *mig_recovery_ops;
 };
 
 #define NFS_SEQID_CONFIRMED 1
@@ -203,6 +206,12 @@
 	int (*renew_lease)(struct nfs_client *, struct rpc_cred *);
 };
 
+struct nfs4_mig_recovery_ops {
+	int (*get_locations)(struct inode *, struct nfs4_fs_locations *,
+		struct page *, struct rpc_cred *);
+	int (*fsid_present)(struct inode *, struct rpc_cred *);
+};
+
 extern const struct dentry_operations nfs4_dentry_operations;
 
 /* dir.c */
@@ -213,10 +222,11 @@
 extern struct file_system_type nfs4_fs_type;
 
 /* nfs4namespace.c */
-rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *);
 struct rpc_clnt *nfs4_create_sec_client(struct rpc_clnt *, struct inode *, struct qstr *);
 struct vfsmount *nfs4_submount(struct nfs_server *, struct dentry *,
 			       struct nfs_fh *, struct nfs_fattr *);
+int nfs4_replace_transport(struct nfs_server *server,
+				const struct nfs4_fs_locations *locations);
 
 /* nfs4proc.c */
 extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *);
@@ -231,6 +241,9 @@
 extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle);
 extern int nfs4_proc_fs_locations(struct rpc_clnt *, struct inode *, const struct qstr *,
 				  struct nfs4_fs_locations *, struct page *);
+extern int nfs4_proc_get_locations(struct inode *, struct nfs4_fs_locations *,
+		struct page *page, struct rpc_cred *);
+extern int nfs4_proc_fsid_present(struct inode *, struct rpc_cred *);
 extern struct rpc_clnt *nfs4_proc_lookup_mountpoint(struct inode *, struct qstr *,
 			    struct nfs_fh *, struct nfs_fattr *);
 extern int nfs4_proc_secinfo(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *);
@@ -411,6 +424,8 @@
 extern void nfs4_schedule_state_manager(struct nfs_client *);
 extern void nfs4_schedule_path_down_recovery(struct nfs_client *clp);
 extern int nfs4_schedule_stateid_recovery(const struct nfs_server *, struct nfs4_state *);
+extern int nfs4_schedule_migration_recovery(const struct nfs_server *);
+extern void nfs4_schedule_lease_moved_recovery(struct nfs_client *);
 extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags);
 extern void nfs41_handle_server_scope(struct nfs_client *,
 				      struct nfs41_server_scope **);
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index a860ab5..b4a160a 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -197,6 +197,7 @@
 	clp->cl_state = 1 << NFS4CLNT_LEASE_EXPIRED;
 	clp->cl_minorversion = cl_init->minorversion;
 	clp->cl_mvops = nfs_v4_minor_ops[cl_init->minorversion];
+	clp->cl_mig_gen = 1;
 	return clp;
 
 error:
@@ -368,6 +369,7 @@
 	if (clp->cl_minorversion != 0)
 		__set_bit(NFS_CS_INFINITE_SLOTS, &clp->cl_flags);
 	__set_bit(NFS_CS_DISCRTRY, &clp->cl_flags);
+	__set_bit(NFS_CS_NO_RETRANS_TIMEOUT, &clp->cl_flags);
 	error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_GSS_KRB5I);
 	if (error == -EINVAL)
 		error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_UNIX);
@@ -924,7 +926,7 @@
 	dprintk("Server FSID: %llx:%llx\n",
 			(unsigned long long) server->fsid.major,
 			(unsigned long long) server->fsid.minor);
-	dprintk("Mount FH: %d\n", mntfh->size);
+	nfs_display_fhandle(mntfh, "Pseudo-fs root FH");
 
 	nfs4_session_set_rwsize(server);
 
@@ -947,9 +949,8 @@
  * Create a version 4 volume record
  */
 static int nfs4_init_server(struct nfs_server *server,
-		const struct nfs_parsed_mount_data *data)
+		struct nfs_parsed_mount_data *data)
 {
-	rpc_authflavor_t pseudoflavor = RPC_AUTH_UNIX;
 	struct rpc_timeout timeparms;
 	int error;
 
@@ -961,9 +962,15 @@
 	/* Initialise the client representation from the mount data */
 	server->flags = data->flags;
 	server->options = data->options;
+	server->auth_info = data->auth_info;
 
-	if (data->auth_flavor_len >= 1)
-		pseudoflavor = data->auth_flavors[0];
+	/* Use the first specified auth flavor. If this flavor isn't
+	 * allowed by the server, use the SECINFO path to try the
+	 * other specified flavors */
+	if (data->auth_info.flavor_len >= 1)
+		data->selected_flavor = data->auth_info.flavors[0];
+	else
+		data->selected_flavor = RPC_AUTH_UNIX;
 
 	/* Get a client record */
 	error = nfs4_set_client(server,
@@ -971,7 +978,7 @@
 			(const struct sockaddr *)&data->nfs_server.address,
 			data->nfs_server.addrlen,
 			data->client_address,
-			pseudoflavor,
+			data->selected_flavor,
 			data->nfs_server.protocol,
 			&timeparms,
 			data->minorversion,
@@ -991,7 +998,8 @@
 
 	server->port = data->nfs_server.port;
 
-	error = nfs_init_server_rpcclient(server, &timeparms, pseudoflavor);
+	error = nfs_init_server_rpcclient(server, &timeparms,
+					  data->selected_flavor);
 
 error:
 	/* Done */
@@ -1018,7 +1026,7 @@
 	if (!server)
 		return ERR_PTR(-ENOMEM);
 
-	auth_probe = mount_info->parsed->auth_flavor_len < 1;
+	auth_probe = mount_info->parsed->auth_info.flavor_len < 1;
 
 	/* set up the general RPC client */
 	error = nfs4_init_server(server, mount_info->parsed);
@@ -1046,6 +1054,7 @@
 {
 	struct nfs_client *parent_client;
 	struct nfs_server *server, *parent_server;
+	bool auth_probe;
 	int error;
 
 	dprintk("--> nfs4_create_referral_server()\n");
@@ -1078,8 +1087,9 @@
 	if (error < 0)
 		goto error;
 
-	error = nfs4_server_common_setup(server, mntfh,
-			!(parent_server->flags & NFS_MOUNT_SECFLAVOUR));
+	auth_probe = parent_server->auth_info.flavor_len < 1;
+
+	error = nfs4_server_common_setup(server, mntfh, auth_probe);
 	if (error < 0)
 		goto error;
 
@@ -1091,3 +1101,111 @@
 	dprintk("<-- nfs4_create_referral_server() = error %d\n", error);
 	return ERR_PTR(error);
 }
+
+/*
+ * Grab the destination's particulars, including lease expiry time.
+ *
+ * Returns zero if probe succeeded and retrieved FSID matches the FSID
+ * we have cached.
+ */
+static int nfs_probe_destination(struct nfs_server *server)
+{
+	struct inode *inode = server->super->s_root->d_inode;
+	struct nfs_fattr *fattr;
+	int error;
+
+	fattr = nfs_alloc_fattr();
+	if (fattr == NULL)
+		return -ENOMEM;
+
+	/* Sanity: the probe won't work if the destination server
+	 * does not recognize the migrated FH. */
+	error = nfs_probe_fsinfo(server, NFS_FH(inode), fattr);
+
+	nfs_free_fattr(fattr);
+	return error;
+}
+
+/**
+ * nfs4_update_server - Move an nfs_server to a different nfs_client
+ *
+ * @server: represents FSID to be moved
+ * @hostname: new end-point's hostname
+ * @sap: new end-point's socket address
+ * @salen: size of "sap"
+ *
+ * The nfs_server must be quiescent before this function is invoked.
+ * Either its session is drained (NFSv4.1+), or its transport is
+ * plugged and drained (NFSv4.0).
+ *
+ * Returns zero on success, or a negative errno value.
+ */
+int nfs4_update_server(struct nfs_server *server, const char *hostname,
+		       struct sockaddr *sap, size_t salen)
+{
+	struct nfs_client *clp = server->nfs_client;
+	struct rpc_clnt *clnt = server->client;
+	struct xprt_create xargs = {
+		.ident		= clp->cl_proto,
+		.net		= &init_net,
+		.dstaddr	= sap,
+		.addrlen	= salen,
+		.servername	= hostname,
+	};
+	char buf[INET6_ADDRSTRLEN + 1];
+	struct sockaddr_storage address;
+	struct sockaddr *localaddr = (struct sockaddr *)&address;
+	int error;
+
+	dprintk("--> %s: move FSID %llx:%llx to \"%s\")\n", __func__,
+			(unsigned long long)server->fsid.major,
+			(unsigned long long)server->fsid.minor,
+			hostname);
+
+	error = rpc_switch_client_transport(clnt, &xargs, clnt->cl_timeout);
+	if (error != 0) {
+		dprintk("<-- %s(): rpc_switch_client_transport returned %d\n",
+			__func__, error);
+		goto out;
+	}
+
+	error = rpc_localaddr(clnt, localaddr, sizeof(address));
+	if (error != 0) {
+		dprintk("<-- %s(): rpc_localaddr returned %d\n",
+			__func__, error);
+		goto out;
+	}
+
+	error = -EAFNOSUPPORT;
+	if (rpc_ntop(localaddr, buf, sizeof(buf)) == 0) {
+		dprintk("<-- %s(): rpc_ntop returned %d\n",
+			__func__, error);
+		goto out;
+	}
+
+	nfs_server_remove_lists(server);
+	error = nfs4_set_client(server, hostname, sap, salen, buf,
+				clp->cl_rpcclient->cl_auth->au_flavor,
+				clp->cl_proto, clnt->cl_timeout,
+				clp->cl_minorversion, clp->cl_net);
+	nfs_put_client(clp);
+	if (error != 0) {
+		nfs_server_insert_lists(server);
+		dprintk("<-- %s(): nfs4_set_client returned %d\n",
+			__func__, error);
+		goto out;
+	}
+
+	if (server->nfs_client->cl_hostname == NULL)
+		server->nfs_client->cl_hostname = kstrdup(hostname, GFP_KERNEL);
+	nfs_server_insert_lists(server);
+
+	error = nfs_probe_destination(server);
+	if (error < 0)
+		goto out;
+
+	dprintk("<-- %s() succeeded\n", __func__);
+
+out:
+	return error;
+}
diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index 77efaf1..1f01b55 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -75,7 +75,7 @@
 
 	nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
 	nfs_file_set_open_context(filp, ctx);
-	nfs_fscache_set_inode_cookie(inode, filp);
+	nfs_fscache_open_file(inode, filp);
 	err = 0;
 
 out_put_ctx:
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 2288cd3..c08cbf4 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -137,6 +137,7 @@
 
 /**
  * nfs_find_best_sec - Find a security mechanism supported locally
+ * @server: NFS server struct
  * @flavors: List of security tuples returned by SECINFO procedure
  *
  * Return the pseudoflavor of the first security mechanism in
@@ -145,7 +146,8 @@
  * is searched in the order returned from the server, per RFC 3530
  * recommendation.
  */
-rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors)
+static rpc_authflavor_t nfs_find_best_sec(struct nfs_server *server,
+					  struct nfs4_secinfo_flavors *flavors)
 {
 	rpc_authflavor_t pseudoflavor;
 	struct nfs4_secinfo4 *secinfo;
@@ -160,12 +162,19 @@
 		case RPC_AUTH_GSS:
 			pseudoflavor = rpcauth_get_pseudoflavor(secinfo->flavor,
 							&secinfo->flavor_info);
-			if (pseudoflavor != RPC_AUTH_MAXFLAVOR)
+			/* make sure pseudoflavor matches sec= mount opt */
+			if (pseudoflavor != RPC_AUTH_MAXFLAVOR &&
+			    nfs_auth_info_match(&server->auth_info,
+						pseudoflavor))
 				return pseudoflavor;
 			break;
 		}
 	}
 
+	/* if there were any sec= options then nothing matched */
+	if (server->auth_info.flavor_len > 0)
+		return -EPERM;
+
 	return RPC_AUTH_UNIX;
 }
 
@@ -187,7 +196,7 @@
 		goto out;
 	}
 
-	flavor = nfs_find_best_sec(flavors);
+	flavor = nfs_find_best_sec(NFS_SERVER(inode), flavors);
 
 out:
 	put_page(page);
@@ -390,7 +399,7 @@
 
 	if (client->cl_auth->au_flavor != flavor)
 		flavor = client->cl_auth->au_flavor;
-	else if (!(server->flags & NFS_MOUNT_SECFLAVOUR)) {
+	else {
 		rpc_authflavor_t new = nfs4_negotiate_security(dir, name);
 		if ((int)new >= 0)
 			flavor = new;
@@ -400,3 +409,104 @@
 	rpc_shutdown_client(client);
 	return mnt;
 }
+
+/*
+ * Try one location from the fs_locations array.
+ *
+ * Returns zero on success, or a negative errno value.
+ */
+static int nfs4_try_replacing_one_location(struct nfs_server *server,
+		char *page, char *page2,
+		const struct nfs4_fs_location *location)
+{
+	const size_t addr_bufsize = sizeof(struct sockaddr_storage);
+	struct sockaddr *sap;
+	unsigned int s;
+	size_t salen;
+	int error;
+
+	sap = kmalloc(addr_bufsize, GFP_KERNEL);
+	if (sap == NULL)
+		return -ENOMEM;
+
+	error = -ENOENT;
+	for (s = 0; s < location->nservers; s++) {
+		const struct nfs4_string *buf = &location->servers[s];
+		char *hostname;
+
+		if (buf->len <= 0 || buf->len > PAGE_SIZE)
+			continue;
+
+		if (memchr(buf->data, IPV6_SCOPE_DELIMITER, buf->len) != NULL)
+			continue;
+
+		salen = nfs_parse_server_name(buf->data, buf->len,
+						sap, addr_bufsize, server);
+		if (salen == 0)
+			continue;
+		rpc_set_port(sap, NFS_PORT);
+
+		error = -ENOMEM;
+		hostname = kstrndup(buf->data, buf->len, GFP_KERNEL);
+		if (hostname == NULL)
+			break;
+
+		error = nfs4_update_server(server, hostname, sap, salen);
+		kfree(hostname);
+		if (error == 0)
+			break;
+	}
+
+	kfree(sap);
+	return error;
+}
+
+/**
+ * nfs4_replace_transport - set up transport to destination server
+ *
+ * @server: export being migrated
+ * @locations: fs_locations array
+ *
+ * Returns zero on success, or a negative errno value.
+ *
+ * The client tries all the entries in the "locations" array, in the
+ * order returned by the server, until one works or the end of the
+ * array is reached.
+ */
+int nfs4_replace_transport(struct nfs_server *server,
+			   const struct nfs4_fs_locations *locations)
+{
+	char *page = NULL, *page2 = NULL;
+	int loc, error;
+
+	error = -ENOENT;
+	if (locations == NULL || locations->nlocations <= 0)
+		goto out;
+
+	error = -ENOMEM;
+	page = (char *) __get_free_page(GFP_USER);
+	if (!page)
+		goto out;
+	page2 = (char *) __get_free_page(GFP_USER);
+	if (!page2)
+		goto out;
+
+	for (loc = 0; loc < locations->nlocations; loc++) {
+		const struct nfs4_fs_location *location =
+						&locations->locations[loc];
+
+		if (location == NULL || location->nservers <= 0 ||
+		    location->rootpath.ncomponents == 0)
+			continue;
+
+		error = nfs4_try_replacing_one_location(server, page,
+							page2, location);
+		if (error == 0)
+			break;
+	}
+
+out:
+	free_page((unsigned long)page);
+	free_page((unsigned long)page2);
+	return error;
+}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d53d678..5ab33c0 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -105,9 +105,6 @@
 	if (nfs_server_capable(dir, NFS_CAP_SECURITY_LABEL) == 0)
 		return NULL;
 
-	if (NFS_SERVER(dir)->nfs_client->cl_minorversion < 2)
-		return NULL;
-
 	err = security_dentry_init_security(dentry, sattr->ia_mode,
 				&dentry->d_name, (void **)&label->label, &label->len);
 	if (err == 0)
@@ -384,6 +381,14 @@
 		case -NFS4ERR_STALE_CLIENTID:
 			nfs4_schedule_lease_recovery(clp);
 			goto wait_on_recovery;
+		case -NFS4ERR_MOVED:
+			ret = nfs4_schedule_migration_recovery(server);
+			if (ret < 0)
+				break;
+			goto wait_on_recovery;
+		case -NFS4ERR_LEASE_MOVED:
+			nfs4_schedule_lease_moved_recovery(clp);
+			goto wait_on_recovery;
 #if defined(CONFIG_NFS_V4_1)
 		case -NFS4ERR_BADSESSION:
 		case -NFS4ERR_BADSLOT:
@@ -431,6 +436,8 @@
 	return nfs4_map_errors(ret);
 wait_on_recovery:
 	ret = nfs4_wait_clnt_recover(clp);
+	if (test_bit(NFS_MIG_FAILED, &server->mig_status))
+		return -EIO;
 	if (ret == 0)
 		exception->retry = 1;
 	return ret;
@@ -1318,31 +1325,24 @@
 	int ret;
 
 	if (!data->rpc_done) {
-		ret = data->rpc_status;
-		goto err;
+		if (data->rpc_status) {
+			ret = data->rpc_status;
+			goto err;
+		}
+		/* cached opens have already been processed */
+		goto update;
 	}
 
-	ret = -ESTALE;
-	if (!(data->f_attr.valid & NFS_ATTR_FATTR_TYPE) ||
-	    !(data->f_attr.valid & NFS_ATTR_FATTR_FILEID) ||
-	    !(data->f_attr.valid & NFS_ATTR_FATTR_CHANGE))
-		goto err;
-
-	ret = -ENOMEM;
-	state = nfs4_get_open_state(inode, data->owner);
-	if (state == NULL)
-		goto err;
-
 	ret = nfs_refresh_inode(inode, &data->f_attr);
 	if (ret)
 		goto err;
 
-	nfs_setsecurity(inode, &data->f_attr, data->f_label);
-
 	if (data->o_res.delegation_type != 0)
 		nfs4_opendata_check_deleg(data, state);
+update:
 	update_open_stateid(state, &data->o_res.stateid, NULL,
 			    data->o_arg.fmode);
+	atomic_inc(&state->count);
 
 	return state;
 err:
@@ -1575,6 +1575,12 @@
 			/* Don't recall a delegation if it was lost */
 			nfs4_schedule_lease_recovery(server->nfs_client);
 			return -EAGAIN;
+		case -NFS4ERR_MOVED:
+			nfs4_schedule_migration_recovery(server);
+			return -EAGAIN;
+		case -NFS4ERR_LEASE_MOVED:
+			nfs4_schedule_lease_moved_recovery(server->nfs_client);
+			return -EAGAIN;
 		case -NFS4ERR_DELEG_REVOKED:
 		case -NFS4ERR_ADMIN_REVOKED:
 		case -NFS4ERR_BAD_STATEID:
@@ -2697,6 +2703,10 @@
 		nfs4_close_state(ctx->state, ctx->mode);
 }
 
+#define FATTR4_WORD1_NFS40_MASK (2*FATTR4_WORD1_MOUNTED_ON_FILEID - 1UL)
+#define FATTR4_WORD2_NFS41_MASK (2*FATTR4_WORD2_SUPPATTR_EXCLCREAT - 1UL)
+#define FATTR4_WORD2_NFS42_MASK (2*FATTR4_WORD2_CHANGE_SECURITY_LABEL - 1UL)
+
 static int _nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle)
 {
 	struct nfs4_server_caps_arg args = {
@@ -2712,12 +2722,25 @@
 
 	status = nfs4_call_sync(server->client, server, &msg, &args.seq_args, &res.seq_res, 0);
 	if (status == 0) {
+		/* Sanity check the server answers */
+		switch (server->nfs_client->cl_minorversion) {
+		case 0:
+			res.attr_bitmask[1] &= FATTR4_WORD1_NFS40_MASK;
+			res.attr_bitmask[2] = 0;
+			break;
+		case 1:
+			res.attr_bitmask[2] &= FATTR4_WORD2_NFS41_MASK;
+			break;
+		case 2:
+			res.attr_bitmask[2] &= FATTR4_WORD2_NFS42_MASK;
+		}
 		memcpy(server->attr_bitmask, res.attr_bitmask, sizeof(server->attr_bitmask));
 		server->caps &= ~(NFS_CAP_ACLS|NFS_CAP_HARDLINKS|
 				NFS_CAP_SYMLINKS|NFS_CAP_FILEID|
 				NFS_CAP_MODE|NFS_CAP_NLINK|NFS_CAP_OWNER|
 				NFS_CAP_OWNER_GROUP|NFS_CAP_ATIME|
-				NFS_CAP_CTIME|NFS_CAP_MTIME);
+				NFS_CAP_CTIME|NFS_CAP_MTIME|
+				NFS_CAP_SECURITY_LABEL);
 		if (res.attr_bitmask[0] & FATTR4_WORD0_ACL)
 			server->caps |= NFS_CAP_ACLS;
 		if (res.has_links != 0)
@@ -2746,14 +2769,12 @@
 #endif
 		memcpy(server->attr_bitmask_nl, res.attr_bitmask,
 				sizeof(server->attr_bitmask));
+		server->attr_bitmask_nl[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
 
-		if (server->caps & NFS_CAP_SECURITY_LABEL) {
-			server->attr_bitmask_nl[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
-			res.attr_bitmask[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
-		}
 		memcpy(server->cache_consistency_bitmask, res.attr_bitmask, sizeof(server->cache_consistency_bitmask));
 		server->cache_consistency_bitmask[0] &= FATTR4_WORD0_CHANGE|FATTR4_WORD0_SIZE;
 		server->cache_consistency_bitmask[1] &= FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY;
+		server->cache_consistency_bitmask[2] = 0;
 		server->acl_bitmask = res.acl_bitmask;
 		server->fh_expire_type = res.fh_expire_type;
 	}
@@ -2864,11 +2885,24 @@
 	int status = -EPERM;
 	size_t i;
 
-	for (i = 0; i < ARRAY_SIZE(flav_array); i++) {
-		status = nfs4_lookup_root_sec(server, fhandle, info, flav_array[i]);
-		if (status == -NFS4ERR_WRONGSEC || status == -EACCES)
-			continue;
-		break;
+	if (server->auth_info.flavor_len > 0) {
+		/* try each flavor specified by user */
+		for (i = 0; i < server->auth_info.flavor_len; i++) {
+			status = nfs4_lookup_root_sec(server, fhandle, info,
+						server->auth_info.flavors[i]);
+			if (status == -NFS4ERR_WRONGSEC || status == -EACCES)
+				continue;
+			break;
+		}
+	} else {
+		/* no flavors specified by user, try default list */
+		for (i = 0; i < ARRAY_SIZE(flav_array); i++) {
+			status = nfs4_lookup_root_sec(server, fhandle, info,
+						      flav_array[i]);
+			if (status == -NFS4ERR_WRONGSEC || status == -EACCES)
+				continue;
+			break;
+		}
 	}
 
 	/*
@@ -2910,9 +2944,6 @@
 		status = nfs4_lookup_root(server, fhandle, info);
 		if (status != -NFS4ERR_WRONGSEC)
 			break;
-		/* Did user force a 'sec=' mount option? */
-		if (server->flags & NFS_MOUNT_SECFLAVOUR)
-			break;
 	default:
 		status = nfs4_do_find_root_sec(server, fhandle, info);
 	}
@@ -2981,11 +3012,16 @@
 	status = nfs4_proc_fs_locations(client, dir, name, locations, page);
 	if (status != 0)
 		goto out;
-	/* Make sure server returned a different fsid for the referral */
+
+	/*
+	 * If the fsid didn't change, this is a migration event, not a
+	 * referral.  Cause us to drop into the exception handler, which
+	 * will kick off migration recovery.
+	 */
 	if (nfs_fsid_equal(&NFS_SERVER(dir)->fsid, &locations->fattr.fsid)) {
 		dprintk("%s: server did not return a different fsid for"
 			" a referral at %s\n", __func__, name->name);
-		status = -EIO;
+		status = -NFS4ERR_MOVED;
 		goto out;
 	}
 	/* Fixup attributes for the nfs_lookup() call to nfs_fhget() */
@@ -3165,9 +3201,6 @@
 			err = -EPERM;
 			if (client != *clnt)
 				goto out;
-			/* No security negotiation if the user specified 'sec=' */
-			if (NFS_SERVER(dir)->flags & NFS_MOUNT_SECFLAVOUR)
-				goto out;
 			client = nfs4_create_sec_client(client, dir, name);
 			if (IS_ERR(client))
 				return PTR_ERR(client);
@@ -4221,7 +4254,13 @@
 	unsigned long timestamp = data->timestamp;
 
 	trace_nfs4_renew_async(clp, task->tk_status);
-	if (task->tk_status < 0) {
+	switch (task->tk_status) {
+	case 0:
+		break;
+	case -NFS4ERR_LEASE_MOVED:
+		nfs4_schedule_lease_moved_recovery(clp);
+		break;
+	default:
 		/* Unless we're shutting down, schedule state recovery! */
 		if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) == 0)
 			return;
@@ -4575,7 +4614,7 @@
 	struct nfs4_label label = {0, 0, buflen, buf};
 
 	u32 bitmask[3] = { 0, 0, FATTR4_WORD2_SECURITY_LABEL };
-	struct nfs4_getattr_arg args = {
+	struct nfs4_getattr_arg arg = {
 		.fh		= NFS_FH(inode),
 		.bitmask	= bitmask,
 	};
@@ -4586,14 +4625,14 @@
 	};
 	struct rpc_message msg = {
 		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_GETATTR],
-		.rpc_argp	= &args,
+		.rpc_argp	= &arg,
 		.rpc_resp	= &res,
 	};
 	int ret;
 
 	nfs_fattr_init(&fattr);
 
-	ret = rpc_call_sync(server->client, &msg, 0);
+	ret = nfs4_call_sync(server->client, server, &msg, &arg.seq_args, &res.seq_res, 0);
 	if (ret)
 		return ret;
 	if (!(fattr.valid & NFS_ATTR_FATTR_V4_SECURITY_LABEL))
@@ -4630,7 +4669,7 @@
 	struct iattr sattr = {0};
 	struct nfs_server *server = NFS_SERVER(inode);
 	const u32 bitmask[3] = { 0, 0, FATTR4_WORD2_SECURITY_LABEL };
-	struct nfs_setattrargs args = {
+	struct nfs_setattrargs arg = {
 		.fh             = NFS_FH(inode),
 		.iap            = &sattr,
 		.server		= server,
@@ -4644,14 +4683,14 @@
 	};
 	struct rpc_message msg = {
 		.rpc_proc       = &nfs4_procedures[NFSPROC4_CLNT_SETATTR],
-		.rpc_argp       = &args,
+		.rpc_argp       = &arg,
 		.rpc_resp       = &res,
 	};
 	int status;
 
-	nfs4_stateid_copy(&args.stateid, &zero_stateid);
+	nfs4_stateid_copy(&arg.stateid, &zero_stateid);
 
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server->client, server, &msg, &arg.seq_args, &res.seq_res, 1);
 	if (status)
 		dprintk("%s failed: %d\n", __func__, status);
 
@@ -4735,17 +4774,24 @@
 			if (state == NULL)
 				break;
 			if (nfs4_schedule_stateid_recovery(server, state) < 0)
-				goto stateid_invalid;
+				goto recovery_failed;
 			goto wait_on_recovery;
 		case -NFS4ERR_EXPIRED:
 			if (state != NULL) {
 				if (nfs4_schedule_stateid_recovery(server, state) < 0)
-					goto stateid_invalid;
+					goto recovery_failed;
 			}
 		case -NFS4ERR_STALE_STATEID:
 		case -NFS4ERR_STALE_CLIENTID:
 			nfs4_schedule_lease_recovery(clp);
 			goto wait_on_recovery;
+		case -NFS4ERR_MOVED:
+			if (nfs4_schedule_migration_recovery(server) < 0)
+				goto recovery_failed;
+			goto wait_on_recovery;
+		case -NFS4ERR_LEASE_MOVED:
+			nfs4_schedule_lease_moved_recovery(clp);
+			goto wait_on_recovery;
 #if defined(CONFIG_NFS_V4_1)
 		case -NFS4ERR_BADSESSION:
 		case -NFS4ERR_BADSLOT:
@@ -4757,29 +4803,28 @@
 			dprintk("%s ERROR %d, Reset session\n", __func__,
 				task->tk_status);
 			nfs4_schedule_session_recovery(clp->cl_session, task->tk_status);
-			task->tk_status = 0;
-			return -EAGAIN;
+			goto restart_call;
 #endif /* CONFIG_NFS_V4_1 */
 		case -NFS4ERR_DELAY:
 			nfs_inc_server_stats(server, NFSIOS_DELAY);
 		case -NFS4ERR_GRACE:
 			rpc_delay(task, NFS4_POLL_RETRY_MAX);
-			task->tk_status = 0;
-			return -EAGAIN;
 		case -NFS4ERR_RETRY_UNCACHED_REP:
 		case -NFS4ERR_OLD_STATEID:
-			task->tk_status = 0;
-			return -EAGAIN;
+			goto restart_call;
 	}
 	task->tk_status = nfs4_map_errors(task->tk_status);
 	return 0;
-stateid_invalid:
+recovery_failed:
 	task->tk_status = -EIO;
 	return 0;
 wait_on_recovery:
 	rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL);
 	if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0)
 		rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
+	if (test_bit(NFS_MIG_FAILED, &server->mig_status))
+		goto recovery_failed;
+restart_call:
 	task->tk_status = 0;
 	return -EAGAIN;
 }
@@ -5106,6 +5151,7 @@
 			status = 0;
 	}
 	request->fl_ops->fl_release_private(request);
+	request->fl_ops = NULL;
 out:
 	return status;
 }
@@ -5779,6 +5825,7 @@
 	struct nfs_release_lockowner_args args;
 	struct nfs4_sequence_args seq_args;
 	struct nfs4_sequence_res seq_res;
+	unsigned long timestamp;
 };
 
 static void nfs4_release_lockowner_prepare(struct rpc_task *task, void *calldata)
@@ -5786,12 +5833,27 @@
 	struct nfs_release_lockowner_data *data = calldata;
 	nfs40_setup_sequence(data->server,
 				&data->seq_args, &data->seq_res, task);
+	data->timestamp = jiffies;
 }
 
 static void nfs4_release_lockowner_done(struct rpc_task *task, void *calldata)
 {
 	struct nfs_release_lockowner_data *data = calldata;
+	struct nfs_server *server = data->server;
+
 	nfs40_sequence_done(task, &data->seq_res);
+
+	switch (task->tk_status) {
+	case 0:
+		renew_lease(server, data->timestamp);
+		break;
+	case -NFS4ERR_STALE_CLIENTID:
+	case -NFS4ERR_EXPIRED:
+	case -NFS4ERR_LEASE_MOVED:
+	case -NFS4ERR_DELAY:
+		if (nfs4_async_handle_error(task, server, NULL) == -EAGAIN)
+			rpc_restart_call_prepare(task);
+	}
 }
 
 static void nfs4_release_lockowner_release(void *calldata)
@@ -5990,6 +6052,283 @@
 	return err;
 }
 
+/*
+ * This operation also signals the server that this client is
+ * performing migration recovery.  The server can stop returning
+ * NFS4ERR_LEASE_MOVED to this client.  A RENEW operation is
+ * appended to this compound to identify the client ID which is
+ * performing recovery.
+ */
+static int _nfs40_proc_get_locations(struct inode *inode,
+				     struct nfs4_fs_locations *locations,
+				     struct page *page, struct rpc_cred *cred)
+{
+	struct nfs_server *server = NFS_SERVER(inode);
+	struct rpc_clnt *clnt = server->client;
+	u32 bitmask[2] = {
+		[0] = FATTR4_WORD0_FSID | FATTR4_WORD0_FS_LOCATIONS,
+	};
+	struct nfs4_fs_locations_arg args = {
+		.clientid	= server->nfs_client->cl_clientid,
+		.fh		= NFS_FH(inode),
+		.page		= page,
+		.bitmask	= bitmask,
+		.migration	= 1,		/* skip LOOKUP */
+		.renew		= 1,		/* append RENEW */
+	};
+	struct nfs4_fs_locations_res res = {
+		.fs_locations	= locations,
+		.migration	= 1,
+		.renew		= 1,
+	};
+	struct rpc_message msg = {
+		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_FS_LOCATIONS],
+		.rpc_argp	= &args,
+		.rpc_resp	= &res,
+		.rpc_cred	= cred,
+	};
+	unsigned long now = jiffies;
+	int status;
+
+	nfs_fattr_init(&locations->fattr);
+	locations->server = server;
+	locations->nlocations = 0;
+
+	nfs4_init_sequence(&args.seq_args, &res.seq_res, 0);
+	nfs4_set_sequence_privileged(&args.seq_args);
+	status = nfs4_call_sync_sequence(clnt, server, &msg,
+					&args.seq_args, &res.seq_res);
+	if (status)
+		return status;
+
+	renew_lease(server, now);
+	return 0;
+}
+
+#ifdef CONFIG_NFS_V4_1
+
+/*
+ * This operation also signals the server that this client is
+ * performing migration recovery.  The server can stop asserting
+ * SEQ4_STATUS_LEASE_MOVED for this client.  The client ID
+ * performing this operation is identified in the SEQUENCE
+ * operation in this compound.
+ *
+ * When the client supports GETATTR(fs_locations_info), it can
+ * be plumbed in here.
+ */
+static int _nfs41_proc_get_locations(struct inode *inode,
+				     struct nfs4_fs_locations *locations,
+				     struct page *page, struct rpc_cred *cred)
+{
+	struct nfs_server *server = NFS_SERVER(inode);
+	struct rpc_clnt *clnt = server->client;
+	u32 bitmask[2] = {
+		[0] = FATTR4_WORD0_FSID | FATTR4_WORD0_FS_LOCATIONS,
+	};
+	struct nfs4_fs_locations_arg args = {
+		.fh		= NFS_FH(inode),
+		.page		= page,
+		.bitmask	= bitmask,
+		.migration	= 1,		/* skip LOOKUP */
+	};
+	struct nfs4_fs_locations_res res = {
+		.fs_locations	= locations,
+		.migration	= 1,
+	};
+	struct rpc_message msg = {
+		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_FS_LOCATIONS],
+		.rpc_argp	= &args,
+		.rpc_resp	= &res,
+		.rpc_cred	= cred,
+	};
+	int status;
+
+	nfs_fattr_init(&locations->fattr);
+	locations->server = server;
+	locations->nlocations = 0;
+
+	nfs4_init_sequence(&args.seq_args, &res.seq_res, 0);
+	nfs4_set_sequence_privileged(&args.seq_args);
+	status = nfs4_call_sync_sequence(clnt, server, &msg,
+					&args.seq_args, &res.seq_res);
+	if (status == NFS4_OK &&
+	    res.seq_res.sr_status_flags & SEQ4_STATUS_LEASE_MOVED)
+		status = -NFS4ERR_LEASE_MOVED;
+	return status;
+}
+
+#endif	/* CONFIG_NFS_V4_1 */
+
+/**
+ * nfs4_proc_get_locations - discover locations for a migrated FSID
+ * @inode: inode on FSID that is migrating
+ * @locations: result of query
+ * @page: buffer
+ * @cred: credential to use for this operation
+ *
+ * Returns NFS4_OK on success, a negative NFS4ERR status code if the
+ * operation failed, or a negative errno if a local error occurred.
+ *
+ * On success, "locations" is filled in, but if the server has
+ * no locations information, NFS_ATTR_FATTR_V4_LOCATIONS is not
+ * asserted.
+ *
+ * -NFS4ERR_LEASE_MOVED is returned if the server still has leases
+ * from this client that require migration recovery.
+ */
+int nfs4_proc_get_locations(struct inode *inode,
+			    struct nfs4_fs_locations *locations,
+			    struct page *page, struct rpc_cred *cred)
+{
+	struct nfs_server *server = NFS_SERVER(inode);
+	struct nfs_client *clp = server->nfs_client;
+	const struct nfs4_mig_recovery_ops *ops =
+					clp->cl_mvops->mig_recovery_ops;
+	struct nfs4_exception exception = { };
+	int status;
+
+	dprintk("%s: FSID %llx:%llx on \"%s\"\n", __func__,
+		(unsigned long long)server->fsid.major,
+		(unsigned long long)server->fsid.minor,
+		clp->cl_hostname);
+	nfs_display_fhandle(NFS_FH(inode), __func__);
+
+	do {
+		status = ops->get_locations(inode, locations, page, cred);
+		if (status != -NFS4ERR_DELAY)
+			break;
+		nfs4_handle_exception(server, status, &exception);
+	} while (exception.retry);
+	return status;
+}
+
+/*
+ * This operation also signals the server that this client is
+ * performing "lease moved" recovery.  The server can stop
+ * returning NFS4ERR_LEASE_MOVED to this client.  A RENEW operation
+ * is appended to this compound to identify the client ID which is
+ * performing recovery.
+ */
+static int _nfs40_proc_fsid_present(struct inode *inode, struct rpc_cred *cred)
+{
+	struct nfs_server *server = NFS_SERVER(inode);
+	struct nfs_client *clp = NFS_SERVER(inode)->nfs_client;
+	struct rpc_clnt *clnt = server->client;
+	struct nfs4_fsid_present_arg args = {
+		.fh		= NFS_FH(inode),
+		.clientid	= clp->cl_clientid,
+		.renew		= 1,		/* append RENEW */
+	};
+	struct nfs4_fsid_present_res res = {
+		.renew		= 1,
+	};
+	struct rpc_message msg = {
+		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_FSID_PRESENT],
+		.rpc_argp	= &args,
+		.rpc_resp	= &res,
+		.rpc_cred	= cred,
+	};
+	unsigned long now = jiffies;
+	int status;
+
+	res.fh = nfs_alloc_fhandle();
+	if (res.fh == NULL)
+		return -ENOMEM;
+
+	nfs4_init_sequence(&args.seq_args, &res.seq_res, 0);
+	nfs4_set_sequence_privileged(&args.seq_args);
+	status = nfs4_call_sync_sequence(clnt, server, &msg,
+						&args.seq_args, &res.seq_res);
+	nfs_free_fhandle(res.fh);
+	if (status)
+		return status;
+
+	do_renew_lease(clp, now);
+	return 0;
+}
+
+#ifdef CONFIG_NFS_V4_1
+
+/*
+ * This operation also signals the server that this client is
+ * performing "lease moved" recovery.  The server can stop asserting
+ * SEQ4_STATUS_LEASE_MOVED for this client.  The client ID performing
+ * this operation is identified in the SEQUENCE operation in this
+ * compound.
+ */
+static int _nfs41_proc_fsid_present(struct inode *inode, struct rpc_cred *cred)
+{
+	struct nfs_server *server = NFS_SERVER(inode);
+	struct rpc_clnt *clnt = server->client;
+	struct nfs4_fsid_present_arg args = {
+		.fh		= NFS_FH(inode),
+	};
+	struct nfs4_fsid_present_res res = {
+	};
+	struct rpc_message msg = {
+		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_FSID_PRESENT],
+		.rpc_argp	= &args,
+		.rpc_resp	= &res,
+		.rpc_cred	= cred,
+	};
+	int status;
+
+	res.fh = nfs_alloc_fhandle();
+	if (res.fh == NULL)
+		return -ENOMEM;
+
+	nfs4_init_sequence(&args.seq_args, &res.seq_res, 0);
+	nfs4_set_sequence_privileged(&args.seq_args);
+	status = nfs4_call_sync_sequence(clnt, server, &msg,
+						&args.seq_args, &res.seq_res);
+	nfs_free_fhandle(res.fh);
+	if (status == NFS4_OK &&
+	    res.seq_res.sr_status_flags & SEQ4_STATUS_LEASE_MOVED)
+		status = -NFS4ERR_LEASE_MOVED;
+	return status;
+}
+
+#endif	/* CONFIG_NFS_V4_1 */
+
+/**
+ * nfs4_proc_fsid_present - Is this FSID present or absent on server?
+ * @inode: inode on FSID to check
+ * @cred: credential to use for this operation
+ *
+ * Server indicates whether the FSID is present, moved, or not
+ * recognized.  This operation is necessary to clear a LEASE_MOVED
+ * condition for this client ID.
+ *
+ * Returns NFS4_OK if the FSID is present on this server,
+ * -NFS4ERR_MOVED if the FSID is no longer present, a negative
+ *  NFS4ERR code if some error occurred on the server, or a
+ *  negative errno if a local failure occurred.
+ */
+int nfs4_proc_fsid_present(struct inode *inode, struct rpc_cred *cred)
+{
+	struct nfs_server *server = NFS_SERVER(inode);
+	struct nfs_client *clp = server->nfs_client;
+	const struct nfs4_mig_recovery_ops *ops =
+					clp->cl_mvops->mig_recovery_ops;
+	struct nfs4_exception exception = { };
+	int status;
+
+	dprintk("%s: FSID %llx:%llx on \"%s\"\n", __func__,
+		(unsigned long long)server->fsid.major,
+		(unsigned long long)server->fsid.minor,
+		clp->cl_hostname);
+	nfs_display_fhandle(NFS_FH(inode), __func__);
+
+	do {
+		status = ops->fsid_present(inode, cred);
+		if (status != -NFS4ERR_DELAY)
+			break;
+		nfs4_handle_exception(server, status, &exception);
+	} while (exception.retry);
+	return status;
+}
+
 /**
  * If 'use_integrity' is true and the state managment nfs_client
  * cl_rpcclient is using krb5i/p, use the integrity protected cl_rpcclient
@@ -6276,8 +6615,14 @@
 	struct nfs41_exchange_id_args args = {
 		.verifier = &verifier,
 		.client = clp,
+#ifdef CONFIG_NFS_V4_1_MIGRATION
 		.flags = EXCHGID4_FLAG_SUPP_MOVED_REFER |
-			EXCHGID4_FLAG_BIND_PRINC_STATEID,
+			 EXCHGID4_FLAG_BIND_PRINC_STATEID |
+			 EXCHGID4_FLAG_SUPP_MOVED_MIGR,
+#else
+		.flags = EXCHGID4_FLAG_SUPP_MOVED_REFER |
+			 EXCHGID4_FLAG_BIND_PRINC_STATEID,
+#endif
 	};
 	struct nfs41_exchange_id_res res = {
 		0
@@ -7616,6 +7961,9 @@
 			break;
 		}
 
+		if (!nfs_auth_info_match(&server->auth_info, flavor))
+			flavor = RPC_AUTH_MAXFLAVOR;
+
 		if (flavor != RPC_AUTH_MAXFLAVOR) {
 			err = nfs4_lookup_root_sec(server, fhandle,
 						   info, flavor);
@@ -7887,6 +8235,18 @@
 };
 #endif
 
+static const struct nfs4_mig_recovery_ops nfs40_mig_recovery_ops = {
+	.get_locations = _nfs40_proc_get_locations,
+	.fsid_present = _nfs40_proc_fsid_present,
+};
+
+#if defined(CONFIG_NFS_V4_1)
+static const struct nfs4_mig_recovery_ops nfs41_mig_recovery_ops = {
+	.get_locations = _nfs41_proc_get_locations,
+	.fsid_present = _nfs41_proc_fsid_present,
+};
+#endif	/* CONFIG_NFS_V4_1 */
+
 static const struct nfs4_minor_version_ops nfs_v4_0_minor_ops = {
 	.minor_version = 0,
 	.init_caps = NFS_CAP_READDIRPLUS
@@ -7902,6 +8262,7 @@
 	.reboot_recovery_ops = &nfs40_reboot_recovery_ops,
 	.nograce_recovery_ops = &nfs40_nograce_recovery_ops,
 	.state_renewal_ops = &nfs40_state_renewal_ops,
+	.mig_recovery_ops = &nfs40_mig_recovery_ops,
 };
 
 #if defined(CONFIG_NFS_V4_1)
@@ -7922,6 +8283,7 @@
 	.reboot_recovery_ops = &nfs41_reboot_recovery_ops,
 	.nograce_recovery_ops = &nfs41_nograce_recovery_ops,
 	.state_renewal_ops = &nfs41_state_renewal_ops,
+	.mig_recovery_ops = &nfs41_mig_recovery_ops,
 };
 #endif
 
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index cc14cbb..c8e729d 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -239,8 +239,6 @@
 	}
 }
 
-#if defined(CONFIG_NFS_V4_1)
-
 static int nfs4_drain_slot_tbl(struct nfs4_slot_table *tbl)
 {
 	set_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state);
@@ -270,6 +268,8 @@
 	return nfs4_drain_slot_tbl(&ses->fc_slot_table);
 }
 
+#if defined(CONFIG_NFS_V4_1)
+
 static int nfs41_setup_state_renewal(struct nfs_client *clp)
 {
 	int status;
@@ -1197,20 +1197,74 @@
 }
 EXPORT_SYMBOL_GPL(nfs4_schedule_lease_recovery);
 
+/**
+ * nfs4_schedule_migration_recovery - trigger migration recovery
+ *
+ * @server: FSID that is migrating
+ *
+ * Returns zero if recovery has started, otherwise a negative NFS4ERR
+ * value is returned.
+ */
+int nfs4_schedule_migration_recovery(const struct nfs_server *server)
+{
+	struct nfs_client *clp = server->nfs_client;
+
+	if (server->fh_expire_type != NFS4_FH_PERSISTENT) {
+		pr_err("NFS: volatile file handles not supported (server %s)\n",
+				clp->cl_hostname);
+		return -NFS4ERR_IO;
+	}
+
+	if (test_bit(NFS_MIG_FAILED, &server->mig_status))
+		return -NFS4ERR_IO;
+
+	dprintk("%s: scheduling migration recovery for (%llx:%llx) on %s\n",
+			__func__,
+			(unsigned long long)server->fsid.major,
+			(unsigned long long)server->fsid.minor,
+			clp->cl_hostname);
+
+	set_bit(NFS_MIG_IN_TRANSITION,
+			&((struct nfs_server *)server)->mig_status);
+	set_bit(NFS4CLNT_MOVED, &clp->cl_state);
+
+	nfs4_schedule_state_manager(clp);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nfs4_schedule_migration_recovery);
+
+/**
+ * nfs4_schedule_lease_moved_recovery - start lease-moved recovery
+ *
+ * @clp: server to check for moved leases
+ *
+ */
+void nfs4_schedule_lease_moved_recovery(struct nfs_client *clp)
+{
+	dprintk("%s: scheduling lease-moved recovery for client ID %llx on %s\n",
+		__func__, clp->cl_clientid, clp->cl_hostname);
+
+	set_bit(NFS4CLNT_LEASE_MOVED, &clp->cl_state);
+	nfs4_schedule_state_manager(clp);
+}
+EXPORT_SYMBOL_GPL(nfs4_schedule_lease_moved_recovery);
+
 int nfs4_wait_clnt_recover(struct nfs_client *clp)
 {
 	int res;
 
 	might_sleep();
 
+	atomic_inc(&clp->cl_count);
 	res = wait_on_bit(&clp->cl_state, NFS4CLNT_MANAGER_RUNNING,
 			nfs_wait_bit_killable, TASK_KILLABLE);
 	if (res)
-		return res;
-
+		goto out;
 	if (clp->cl_cons_state < 0)
-		return clp->cl_cons_state;
-	return 0;
+		res = clp->cl_cons_state;
+out:
+	nfs_put_client(clp);
+	return res;
 }
 
 int nfs4_client_recover_expired_lease(struct nfs_client *clp)
@@ -1375,8 +1429,8 @@
 			case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
 				goto out;
 			default:
-				printk(KERN_ERR "NFS: %s: unhandled error %d. "
-					"Zeroing state\n", __func__, status);
+				printk(KERN_ERR "NFS: %s: unhandled error %d\n",
+					 __func__, status);
 			case -ENOMEM:
 			case -NFS4ERR_DENIED:
 			case -NFS4ERR_RECLAIM_BAD:
@@ -1422,7 +1476,7 @@
 		if (status >= 0) {
 			status = nfs4_reclaim_locks(state, ops);
 			if (status >= 0) {
-				if (test_bit(NFS_DELEGATED_STATE, &state->flags) != 0) {
+				if (!test_bit(NFS_DELEGATED_STATE, &state->flags)) {
 					spin_lock(&state->state_lock);
 					list_for_each_entry(lock, &state->lock_states, ls_locks) {
 						if (!test_bit(NFS_LOCK_INITIALIZED, &lock->ls_flags))
@@ -1439,15 +1493,12 @@
 		}
 		switch (status) {
 			default:
-				printk(KERN_ERR "NFS: %s: unhandled error %d. "
-					"Zeroing state\n", __func__, status);
+				printk(KERN_ERR "NFS: %s: unhandled error %d\n",
+					__func__, status);
 			case -ENOENT:
 			case -ENOMEM:
 			case -ESTALE:
-				/*
-				 * Open state on this file cannot be recovered
-				 * All we can do is revert to using the zero stateid.
-				 */
+				/* Open state on this file cannot be recovered */
 				nfs4_state_mark_recovery_failed(state, status);
 				break;
 			case -EAGAIN:
@@ -1628,7 +1679,6 @@
 			nfs4_state_end_reclaim_reboot(clp);
 			break;
 		case -NFS4ERR_STALE_CLIENTID:
-		case -NFS4ERR_LEASE_MOVED:
 			set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
 			nfs4_state_clear_reclaim_reboot(clp);
 			nfs4_state_start_reclaim_reboot(clp);
@@ -1829,6 +1879,168 @@
 	return 0;
 }
 
+/*
+ * Try remote migration of one FSID from a source server to a
+ * destination server.  The source server provides a list of
+ * potential destinations.
+ *
+ * Returns zero or a negative NFS4ERR status code.
+ */
+static int nfs4_try_migration(struct nfs_server *server, struct rpc_cred *cred)
+{
+	struct nfs_client *clp = server->nfs_client;
+	struct nfs4_fs_locations *locations = NULL;
+	struct inode *inode;
+	struct page *page;
+	int status, result;
+
+	dprintk("--> %s: FSID %llx:%llx on \"%s\"\n", __func__,
+			(unsigned long long)server->fsid.major,
+			(unsigned long long)server->fsid.minor,
+			clp->cl_hostname);
+
+	result = 0;
+	page = alloc_page(GFP_KERNEL);
+	locations = kmalloc(sizeof(struct nfs4_fs_locations), GFP_KERNEL);
+	if (page == NULL || locations == NULL) {
+		dprintk("<-- %s: no memory\n", __func__);
+		goto out;
+	}
+
+	inode = server->super->s_root->d_inode;
+	result = nfs4_proc_get_locations(inode, locations, page, cred);
+	if (result) {
+		dprintk("<-- %s: failed to retrieve fs_locations: %d\n",
+			__func__, result);
+		goto out;
+	}
+
+	result = -NFS4ERR_NXIO;
+	if (!(locations->fattr.valid & NFS_ATTR_FATTR_V4_LOCATIONS)) {
+		dprintk("<-- %s: No fs_locations data, migration skipped\n",
+			__func__);
+		goto out;
+	}
+
+	nfs4_begin_drain_session(clp);
+
+	status = nfs4_replace_transport(server, locations);
+	if (status != 0) {
+		dprintk("<-- %s: failed to replace transport: %d\n",
+			__func__, status);
+		goto out;
+	}
+
+	result = 0;
+	dprintk("<-- %s: migration succeeded\n", __func__);
+
+out:
+	if (page != NULL)
+		__free_page(page);
+	kfree(locations);
+	if (result) {
+		pr_err("NFS: migration recovery failed (server %s)\n",
+				clp->cl_hostname);
+		set_bit(NFS_MIG_FAILED, &server->mig_status);
+	}
+	return result;
+}
+
+/*
+ * Returns zero or a negative NFS4ERR status code.
+ */
+static int nfs4_handle_migration(struct nfs_client *clp)
+{
+	const struct nfs4_state_maintenance_ops *ops =
+				clp->cl_mvops->state_renewal_ops;
+	struct nfs_server *server;
+	struct rpc_cred *cred;
+
+	dprintk("%s: migration reported on \"%s\"\n", __func__,
+			clp->cl_hostname);
+
+	spin_lock(&clp->cl_lock);
+	cred = ops->get_state_renewal_cred_locked(clp);
+	spin_unlock(&clp->cl_lock);
+	if (cred == NULL)
+		return -NFS4ERR_NOENT;
+
+	clp->cl_mig_gen++;
+restart:
+	rcu_read_lock();
+	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
+		int status;
+
+		if (server->mig_gen == clp->cl_mig_gen)
+			continue;
+		server->mig_gen = clp->cl_mig_gen;
+
+		if (!test_and_clear_bit(NFS_MIG_IN_TRANSITION,
+						&server->mig_status))
+			continue;
+
+		rcu_read_unlock();
+		status = nfs4_try_migration(server, cred);
+		if (status < 0) {
+			put_rpccred(cred);
+			return status;
+		}
+		goto restart;
+	}
+	rcu_read_unlock();
+	put_rpccred(cred);
+	return 0;
+}
+
+/*
+ * Test each nfs_server on the clp's cl_superblocks list to see
+ * if it's moved to another server.  Stop when the server no longer
+ * returns NFS4ERR_LEASE_MOVED.
+ */
+static int nfs4_handle_lease_moved(struct nfs_client *clp)
+{
+	const struct nfs4_state_maintenance_ops *ops =
+				clp->cl_mvops->state_renewal_ops;
+	struct nfs_server *server;
+	struct rpc_cred *cred;
+
+	dprintk("%s: lease moved reported on \"%s\"\n", __func__,
+			clp->cl_hostname);
+
+	spin_lock(&clp->cl_lock);
+	cred = ops->get_state_renewal_cred_locked(clp);
+	spin_unlock(&clp->cl_lock);
+	if (cred == NULL)
+		return -NFS4ERR_NOENT;
+
+	clp->cl_mig_gen++;
+restart:
+	rcu_read_lock();
+	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
+		struct inode *inode;
+		int status;
+
+		if (server->mig_gen == clp->cl_mig_gen)
+			continue;
+		server->mig_gen = clp->cl_mig_gen;
+
+		rcu_read_unlock();
+
+		inode = server->super->s_root->d_inode;
+		status = nfs4_proc_fsid_present(inode, cred);
+		if (status != -NFS4ERR_MOVED)
+			goto restart;	/* wasn't this one */
+		if (nfs4_try_migration(server, cred) == -NFS4ERR_LEASE_MOVED)
+			goto restart;	/* there are more */
+		goto out;
+	}
+	rcu_read_unlock();
+
+out:
+	put_rpccred(cred);
+	return 0;
+}
+
 /**
  * nfs4_discover_server_trunking - Detect server IP address trunking
  *
@@ -2017,9 +2229,10 @@
 		nfs41_handle_server_reboot(clp);
 	if (flags & (SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED |
 			    SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED |
-			    SEQ4_STATUS_ADMIN_STATE_REVOKED |
-			    SEQ4_STATUS_LEASE_MOVED))
+			    SEQ4_STATUS_ADMIN_STATE_REVOKED))
 		nfs41_handle_state_revoked(clp);
+	if (flags & SEQ4_STATUS_LEASE_MOVED)
+		nfs4_schedule_lease_moved_recovery(clp);
 	if (flags & SEQ4_STATUS_RECALLABLE_STATE_REVOKED)
 		nfs41_handle_recallable_state_revoked(clp);
 	if (flags & SEQ4_STATUS_BACKCHANNEL_FAULT)
@@ -2157,7 +2370,20 @@
 			status = nfs4_check_lease(clp);
 			if (status < 0)
 				goto out_error;
-			continue;
+		}
+
+		if (test_and_clear_bit(NFS4CLNT_MOVED, &clp->cl_state)) {
+			section = "migration";
+			status = nfs4_handle_migration(clp);
+			if (status < 0)
+				goto out_error;
+		}
+
+		if (test_and_clear_bit(NFS4CLNT_LEASE_MOVED, &clp->cl_state)) {
+			section = "lease moved";
+			status = nfs4_handle_lease_moved(clp);
+			if (status < 0)
+				goto out_error;
 		}
 
 		/* First recover reboot state... */
diff --git a/fs/nfs/nfs4super.c b/fs/nfs/nfs4super.c
index e26acdd..65ab0a0 100644
--- a/fs/nfs/nfs4super.c
+++ b/fs/nfs/nfs4super.c
@@ -261,9 +261,9 @@
 
 	res = nfs_follow_remote_path(root_mnt, export_path);
 
-	dfprintk(MOUNT, "<-- nfs4_try_mount() = %ld%s\n",
-			IS_ERR(res) ? PTR_ERR(res) : 0,
-			IS_ERR(res) ? " [error]" : "");
+	dfprintk(MOUNT, "<-- nfs4_try_mount() = %d%s\n",
+		 PTR_ERR_OR_ZERO(res),
+		 IS_ERR(res) ? " [error]" : "");
 	return res;
 }
 
@@ -319,9 +319,9 @@
 	data->mnt_path = export_path;
 
 	res = nfs_follow_remote_path(root_mnt, export_path);
-	dprintk("<-- nfs4_referral_mount() = %ld%s\n",
-			IS_ERR(res) ? PTR_ERR(res) : 0,
-			IS_ERR(res) ? " [error]" : "");
+	dprintk("<-- nfs4_referral_mount() = %d%s\n",
+		PTR_ERR_OR_ZERO(res),
+		IS_ERR(res) ? " [error]" : "");
 	return res;
 }
 
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 79210d2..5be2868 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -105,12 +105,8 @@
 #ifdef CONFIG_NFS_V4_SECURITY_LABEL
 /* PI(4 bytes) + LFS(4 bytes) + 1(for null terminator?) + MAXLABELLEN */
 #define	nfs4_label_maxsz	(4 + 4 + 1 + XDR_QUADLEN(NFS4_MAXLABELLEN))
-#define encode_readdir_space 24
-#define encode_readdir_bitmask_sz 3
 #else
 #define	nfs4_label_maxsz	0
-#define encode_readdir_space 20
-#define encode_readdir_bitmask_sz 2
 #endif
 /* We support only one layout type per file system */
 #define decode_mdsthreshold_maxsz (1 + 1 + nfs4_fattr_bitmap_maxsz + 1 + 8)
@@ -595,11 +591,13 @@
 #define NFS4_enc_getattr_sz	(compound_encode_hdr_maxsz + \
 				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
-				encode_getattr_maxsz)
+				encode_getattr_maxsz + \
+				encode_renew_maxsz)
 #define NFS4_dec_getattr_sz	(compound_decode_hdr_maxsz + \
 				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
-				decode_getattr_maxsz)
+				decode_getattr_maxsz + \
+				decode_renew_maxsz)
 #define NFS4_enc_lookup_sz	(compound_encode_hdr_maxsz + \
 				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
@@ -736,13 +734,15 @@
 				 encode_sequence_maxsz + \
 				 encode_putfh_maxsz + \
 				 encode_lookup_maxsz + \
-				 encode_fs_locations_maxsz)
+				 encode_fs_locations_maxsz + \
+				 encode_renew_maxsz)
 #define NFS4_dec_fs_locations_sz \
 				(compound_decode_hdr_maxsz + \
 				 decode_sequence_maxsz + \
 				 decode_putfh_maxsz + \
 				 decode_lookup_maxsz + \
-				 decode_fs_locations_maxsz)
+				 decode_fs_locations_maxsz + \
+				 decode_renew_maxsz)
 #define NFS4_enc_secinfo_sz 	(compound_encode_hdr_maxsz + \
 				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
@@ -751,6 +751,18 @@
 				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_secinfo_maxsz)
+#define NFS4_enc_fsid_present_sz \
+				(compound_encode_hdr_maxsz + \
+				 encode_sequence_maxsz + \
+				 encode_putfh_maxsz + \
+				 encode_getfh_maxsz + \
+				 encode_renew_maxsz)
+#define NFS4_dec_fsid_present_sz \
+				(compound_decode_hdr_maxsz + \
+				 decode_sequence_maxsz + \
+				 decode_putfh_maxsz + \
+				 decode_getfh_maxsz + \
+				 decode_renew_maxsz)
 #if defined(CONFIG_NFS_V4_1)
 #define NFS4_enc_bind_conn_to_session_sz \
 				(compound_encode_hdr_maxsz + \
@@ -1565,6 +1577,8 @@
 	};
 	uint32_t dircount = readdir->count >> 1;
 	__be32 *p, verf[2];
+	uint32_t attrlen = 0;
+	unsigned int i;
 
 	if (readdir->plus) {
 		attrs[0] |= FATTR4_WORD0_TYPE|FATTR4_WORD0_CHANGE|FATTR4_WORD0_SIZE|
@@ -1573,26 +1587,27 @@
 			FATTR4_WORD1_OWNER_GROUP|FATTR4_WORD1_RAWDEV|
 			FATTR4_WORD1_SPACE_USED|FATTR4_WORD1_TIME_ACCESS|
 			FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY;
+		attrs[2] |= FATTR4_WORD2_SECURITY_LABEL;
 		dircount >>= 1;
 	}
 	/* Use mounted_on_fileid only if the server supports it */
 	if (!(readdir->bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID))
 		attrs[0] |= FATTR4_WORD0_FILEID;
+	for (i = 0; i < ARRAY_SIZE(attrs); i++) {
+		attrs[i] &= readdir->bitmask[i];
+		if (attrs[i] != 0)
+			attrlen = i+1;
+	}
 
 	encode_op_hdr(xdr, OP_READDIR, decode_readdir_maxsz, hdr);
 	encode_uint64(xdr, readdir->cookie);
 	encode_nfs4_verifier(xdr, &readdir->verifier);
-	p = reserve_space(xdr, encode_readdir_space);
+	p = reserve_space(xdr, 12 + (attrlen << 2));
 	*p++ = cpu_to_be32(dircount);
 	*p++ = cpu_to_be32(readdir->count);
-	*p++ = cpu_to_be32(encode_readdir_bitmask_sz);
-	*p++ = cpu_to_be32(attrs[0] & readdir->bitmask[0]);
-	*p   = cpu_to_be32(attrs[1] & readdir->bitmask[1]);
-	if (encode_readdir_bitmask_sz > 2) {
-		if (hdr->minorversion > 1)
-			attrs[2] |= FATTR4_WORD2_SECURITY_LABEL;
-		p++, *p++ = cpu_to_be32(attrs[2] & readdir->bitmask[2]);
-	}
+	*p++ = cpu_to_be32(attrlen);
+	for (i = 0; i < attrlen; i++)
+		*p++ = cpu_to_be32(attrs[i]);
 	memcpy(verf, readdir->verifier.data, sizeof(verf));
 
 	dprintk("%s: cookie = %llu, verifier = %08x:%08x, bitmap = %08x:%08x:%08x\n",
@@ -2687,11 +2702,20 @@
 
 	encode_compound_hdr(xdr, req, &hdr);
 	encode_sequence(xdr, &args->seq_args, &hdr);
-	encode_putfh(xdr, args->dir_fh, &hdr);
-	encode_lookup(xdr, args->name, &hdr);
-	replen = hdr.replen;	/* get the attribute into args->page */
-	encode_fs_locations(xdr, args->bitmask, &hdr);
+	if (args->migration) {
+		encode_putfh(xdr, args->fh, &hdr);
+		replen = hdr.replen;
+		encode_fs_locations(xdr, args->bitmask, &hdr);
+		if (args->renew)
+			encode_renew(xdr, args->clientid, &hdr);
+	} else {
+		encode_putfh(xdr, args->dir_fh, &hdr);
+		encode_lookup(xdr, args->name, &hdr);
+		replen = hdr.replen;
+		encode_fs_locations(xdr, args->bitmask, &hdr);
+	}
 
+	/* Set up reply kvec to capture returned fs_locations array. */
 	xdr_inline_pages(&req->rq_rcv_buf, replen << 2, &args->page,
 			0, PAGE_SIZE);
 	encode_nops(&hdr);
@@ -2715,6 +2739,26 @@
 	encode_nops(&hdr);
 }
 
+/*
+ * Encode FSID_PRESENT request
+ */
+static void nfs4_xdr_enc_fsid_present(struct rpc_rqst *req,
+				      struct xdr_stream *xdr,
+				      struct nfs4_fsid_present_arg *args)
+{
+	struct compound_hdr hdr = {
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
+	};
+
+	encode_compound_hdr(xdr, req, &hdr);
+	encode_sequence(xdr, &args->seq_args, &hdr);
+	encode_putfh(xdr, args->fh, &hdr);
+	encode_getfh(xdr, &hdr);
+	if (args->renew)
+		encode_renew(xdr, args->clientid, &hdr);
+	encode_nops(&hdr);
+}
+
 #if defined(CONFIG_NFS_V4_1)
 /*
  * BIND_CONN_TO_SESSION request
@@ -6824,13 +6868,26 @@
 	status = decode_putfh(xdr);
 	if (status)
 		goto out;
-	status = decode_lookup(xdr);
-	if (status)
-		goto out;
-	xdr_enter_page(xdr, PAGE_SIZE);
-	status = decode_getfattr_generic(xdr, &res->fs_locations->fattr,
+	if (res->migration) {
+		xdr_enter_page(xdr, PAGE_SIZE);
+		status = decode_getfattr_generic(xdr,
+					&res->fs_locations->fattr,
 					 NULL, res->fs_locations,
 					 NULL, res->fs_locations->server);
+		if (status)
+			goto out;
+		if (res->renew)
+			status = decode_renew(xdr);
+	} else {
+		status = decode_lookup(xdr);
+		if (status)
+			goto out;
+		xdr_enter_page(xdr, PAGE_SIZE);
+		status = decode_getfattr_generic(xdr,
+					&res->fs_locations->fattr,
+					 NULL, res->fs_locations,
+					 NULL, res->fs_locations->server);
+	}
 out:
 	return status;
 }
@@ -6859,6 +6916,34 @@
 	return status;
 }
 
+/*
+ * Decode FSID_PRESENT response
+ */
+static int nfs4_xdr_dec_fsid_present(struct rpc_rqst *rqstp,
+				     struct xdr_stream *xdr,
+				     struct nfs4_fsid_present_res *res)
+{
+	struct compound_hdr hdr;
+	int status;
+
+	status = decode_compound_hdr(xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
+	status = decode_putfh(xdr);
+	if (status)
+		goto out;
+	status = decode_getfh(xdr, res->fh);
+	if (status)
+		goto out;
+	if (res->renew)
+		status = decode_renew(xdr);
+out:
+	return status;
+}
+
 #if defined(CONFIG_NFS_V4_1)
 /*
  * Decode BIND_CONN_TO_SESSION response
@@ -7373,6 +7458,7 @@
 	PROC(FS_LOCATIONS,	enc_fs_locations,	dec_fs_locations),
 	PROC(RELEASE_LOCKOWNER,	enc_release_lockowner,	dec_release_lockowner),
 	PROC(SECINFO,		enc_secinfo,		dec_secinfo),
+	PROC(FSID_PRESENT,	enc_fsid_present,	dec_fsid_present),
 #if defined(CONFIG_NFS_V4_1)
 	PROC(EXCHANGE_ID,	enc_exchange_id,	dec_exchange_id),
 	PROC(CREATE_SESSION,	enc_create_session,	dec_create_session),
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index a03b9c6..317d6fc 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -497,7 +497,8 @@
 	static const struct {
 		rpc_authflavor_t flavour;
 		const char *str;
-	} sec_flavours[] = {
+	} sec_flavours[NFS_AUTH_INFO_MAX_FLAVORS] = {
+		/* update NFS_AUTH_INFO_MAX_FLAVORS when this list changes! */
 		{ RPC_AUTH_NULL, "null" },
 		{ RPC_AUTH_UNIX, "sys" },
 		{ RPC_AUTH_GSS_KRB5, "krb5" },
@@ -923,8 +924,7 @@
 		data->mount_server.port	= NFS_UNSPEC_PORT;
 		data->nfs_server.port	= NFS_UNSPEC_PORT;
 		data->nfs_server.protocol = XPRT_TRANSPORT_TCP;
-		data->auth_flavors[0]	= RPC_AUTH_MAXFLAVOR;
-		data->auth_flavor_len	= 0;
+		data->selected_flavor	= RPC_AUTH_MAXFLAVOR;
 		data->minorversion	= 0;
 		data->need_mount	= true;
 		data->net		= current->nsproxy->net_ns;
@@ -1019,14 +1019,53 @@
 	}
 }
 
-static void nfs_set_auth_parsed_mount_data(struct nfs_parsed_mount_data *data,
-		rpc_authflavor_t pseudoflavor)
+/*
+ * Add 'flavor' to 'auth_info' if not already present.
+ * Returns true if 'flavor' ends up in the list, false otherwise
+ */
+static bool nfs_auth_info_add(struct nfs_auth_info *auth_info,
+			      rpc_authflavor_t flavor)
 {
-	data->auth_flavors[0] = pseudoflavor;
-	data->auth_flavor_len = 1;
+	unsigned int i;
+	unsigned int max_flavor_len = (sizeof(auth_info->flavors) /
+				       sizeof(auth_info->flavors[0]));
+
+	/* make sure this flavor isn't already in the list */
+	for (i = 0; i < auth_info->flavor_len; i++) {
+		if (flavor == auth_info->flavors[i])
+			return true;
+	}
+
+	if (auth_info->flavor_len + 1 >= max_flavor_len) {
+		dfprintk(MOUNT, "NFS: too many sec= flavors\n");
+		return false;
+	}
+
+	auth_info->flavors[auth_info->flavor_len++] = flavor;
+	return true;
 }
 
 /*
+ * Return true if 'match' is in auth_info or auth_info is empty.
+ * Return false otherwise.
+ */
+bool nfs_auth_info_match(const struct nfs_auth_info *auth_info,
+			 rpc_authflavor_t match)
+{
+	int i;
+
+	if (!auth_info->flavor_len)
+		return true;
+
+	for (i = 0; i < auth_info->flavor_len; i++) {
+		if (auth_info->flavors[i] == match)
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(nfs_auth_info_match);
+
+/*
  * Parse the value of the 'sec=' option.
  */
 static int nfs_parse_security_flavors(char *value,
@@ -1034,49 +1073,55 @@
 {
 	substring_t args[MAX_OPT_ARGS];
 	rpc_authflavor_t pseudoflavor;
+	char *p;
 
 	dfprintk(MOUNT, "NFS: parsing sec=%s option\n", value);
 
-	switch (match_token(value, nfs_secflavor_tokens, args)) {
-	case Opt_sec_none:
-		pseudoflavor = RPC_AUTH_NULL;
-		break;
-	case Opt_sec_sys:
-		pseudoflavor = RPC_AUTH_UNIX;
-		break;
-	case Opt_sec_krb5:
-		pseudoflavor = RPC_AUTH_GSS_KRB5;
-		break;
-	case Opt_sec_krb5i:
-		pseudoflavor = RPC_AUTH_GSS_KRB5I;
-		break;
-	case Opt_sec_krb5p:
-		pseudoflavor = RPC_AUTH_GSS_KRB5P;
-		break;
-	case Opt_sec_lkey:
-		pseudoflavor = RPC_AUTH_GSS_LKEY;
-		break;
-	case Opt_sec_lkeyi:
-		pseudoflavor = RPC_AUTH_GSS_LKEYI;
-		break;
-	case Opt_sec_lkeyp:
-		pseudoflavor = RPC_AUTH_GSS_LKEYP;
-		break;
-	case Opt_sec_spkm:
-		pseudoflavor = RPC_AUTH_GSS_SPKM;
-		break;
-	case Opt_sec_spkmi:
-		pseudoflavor = RPC_AUTH_GSS_SPKMI;
-		break;
-	case Opt_sec_spkmp:
-		pseudoflavor = RPC_AUTH_GSS_SPKMP;
-		break;
-	default:
-		return 0;
+	while ((p = strsep(&value, ":")) != NULL) {
+		switch (match_token(p, nfs_secflavor_tokens, args)) {
+		case Opt_sec_none:
+			pseudoflavor = RPC_AUTH_NULL;
+			break;
+		case Opt_sec_sys:
+			pseudoflavor = RPC_AUTH_UNIX;
+			break;
+		case Opt_sec_krb5:
+			pseudoflavor = RPC_AUTH_GSS_KRB5;
+			break;
+		case Opt_sec_krb5i:
+			pseudoflavor = RPC_AUTH_GSS_KRB5I;
+			break;
+		case Opt_sec_krb5p:
+			pseudoflavor = RPC_AUTH_GSS_KRB5P;
+			break;
+		case Opt_sec_lkey:
+			pseudoflavor = RPC_AUTH_GSS_LKEY;
+			break;
+		case Opt_sec_lkeyi:
+			pseudoflavor = RPC_AUTH_GSS_LKEYI;
+			break;
+		case Opt_sec_lkeyp:
+			pseudoflavor = RPC_AUTH_GSS_LKEYP;
+			break;
+		case Opt_sec_spkm:
+			pseudoflavor = RPC_AUTH_GSS_SPKM;
+			break;
+		case Opt_sec_spkmi:
+			pseudoflavor = RPC_AUTH_GSS_SPKMI;
+			break;
+		case Opt_sec_spkmp:
+			pseudoflavor = RPC_AUTH_GSS_SPKMP;
+			break;
+		default:
+			dfprintk(MOUNT,
+				 "NFS: sec= option '%s' not recognized\n", p);
+			return 0;
+		}
+
+		if (!nfs_auth_info_add(&mnt->auth_info, pseudoflavor))
+			return 0;
 	}
 
-	mnt->flags |= NFS_MOUNT_SECFLAVOUR;
-	nfs_set_auth_parsed_mount_data(mnt, pseudoflavor);
 	return 1;
 }
 
@@ -1623,12 +1668,14 @@
 }
 
 /*
- * Ensure that the specified authtype in args->auth_flavors[0] is supported by
- * the server. Returns 0 if it's ok, and -EACCES if not.
+ * Ensure that a specified authtype in args->auth_info is supported by
+ * the server. Returns 0 and sets args->selected_flavor if it's ok, and
+ * -EACCES if not.
  */
-static int nfs_verify_authflavor(struct nfs_parsed_mount_data *args,
+static int nfs_verify_authflavors(struct nfs_parsed_mount_data *args,
 			rpc_authflavor_t *server_authlist, unsigned int count)
 {
+	rpc_authflavor_t flavor = RPC_AUTH_MAXFLAVOR;
 	unsigned int i;
 
 	/*
@@ -1640,17 +1687,20 @@
 	 * can be used.
 	 */
 	for (i = 0; i < count; i++) {
-		if (args->auth_flavors[0] == server_authlist[i] ||
-		    server_authlist[i] == RPC_AUTH_NULL)
+		flavor = server_authlist[i];
+
+		if (nfs_auth_info_match(&args->auth_info, flavor) ||
+		    flavor == RPC_AUTH_NULL)
 			goto out;
 	}
 
-	dfprintk(MOUNT, "NFS: auth flavor %u not supported by server\n",
-		args->auth_flavors[0]);
+	dfprintk(MOUNT,
+		 "NFS: specified auth flavors not supported by server\n");
 	return -EACCES;
 
 out:
-	dfprintk(MOUNT, "NFS: using auth flavor %u\n", args->auth_flavors[0]);
+	args->selected_flavor = flavor;
+	dfprintk(MOUNT, "NFS: using auth flavor %u\n", args->selected_flavor);
 	return 0;
 }
 
@@ -1738,9 +1788,10 @@
 	 * Was a sec= authflavor specified in the options? First, verify
 	 * whether the server supports it, and then just try to use it if so.
 	 */
-	if (args->auth_flavor_len > 0) {
-		status = nfs_verify_authflavor(args, authlist, authlist_len);
-		dfprintk(MOUNT, "NFS: using auth flavor %u\n", args->auth_flavors[0]);
+	if (args->auth_info.flavor_len > 0) {
+		status = nfs_verify_authflavors(args, authlist, authlist_len);
+		dfprintk(MOUNT, "NFS: using auth flavor %u\n",
+			 args->selected_flavor);
 		if (status)
 			return ERR_PTR(status);
 		return nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
@@ -1769,7 +1820,7 @@
 			/* Fallthrough */
 		}
 		dfprintk(MOUNT, "NFS: attempting to use auth flavor %u\n", flavor);
-		nfs_set_auth_parsed_mount_data(args, flavor);
+		args->selected_flavor = flavor;
 		server = nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
 		if (!IS_ERR(server))
 			return server;
@@ -1785,7 +1836,7 @@
 
 	/* Last chance! Try AUTH_UNIX */
 	dfprintk(MOUNT, "NFS: attempting to use auth flavor %u\n", RPC_AUTH_UNIX);
-	nfs_set_auth_parsed_mount_data(args, RPC_AUTH_UNIX);
+	args->selected_flavor = RPC_AUTH_UNIX;
 	return nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
 }
 
@@ -1972,9 +2023,9 @@
 		args->bsize		= data->bsize;
 
 		if (data->flags & NFS_MOUNT_SECFLAVOUR)
-			nfs_set_auth_parsed_mount_data(args, data->pseudoflavor);
+			args->selected_flavor = data->pseudoflavor;
 		else
-			nfs_set_auth_parsed_mount_data(args, RPC_AUTH_UNIX);
+			args->selected_flavor = RPC_AUTH_UNIX;
 		if (!args->nfs_server.hostname)
 			goto out_nomem;
 
@@ -2108,9 +2159,6 @@
 
 	nfs_set_port(sap, &args->nfs_server.port, port);
 
-	if (args->auth_flavor_len > 1)
-		goto out_bad_auth;
-
 	return nfs_parse_devname(dev_name,
 				   &args->nfs_server.hostname,
 				   max_namelen,
@@ -2130,10 +2178,6 @@
 out_no_address:
 	dfprintk(MOUNT, "NFS: mount program didn't pass remote address\n");
 	return -EINVAL;
-
-out_bad_auth:
-	dfprintk(MOUNT, "NFS: Too many RPC auth flavours specified\n");
-	return -EINVAL;
 }
 
 static int
@@ -2143,8 +2187,10 @@
 	if (data->flags != nfss->flags ||
 	    data->rsize != nfss->rsize ||
 	    data->wsize != nfss->wsize ||
+	    data->version != nfss->nfs_client->rpc_ops->version ||
+	    data->minorversion != nfss->nfs_client->cl_minorversion ||
 	    data->retrans != nfss->client->cl_timeout->to_retries ||
-	    data->auth_flavors[0] != nfss->client->cl_auth->au_flavor ||
+	    data->selected_flavor != nfss->client->cl_auth->au_flavor ||
 	    data->acregmin != nfss->acregmin / HZ ||
 	    data->acregmax != nfss->acregmax / HZ ||
 	    data->acdirmin != nfss->acdirmin / HZ ||
@@ -2189,7 +2235,8 @@
 	data->rsize = nfss->rsize;
 	data->wsize = nfss->wsize;
 	data->retrans = nfss->client->cl_timeout->to_retries;
-	nfs_set_auth_parsed_mount_data(data, nfss->client->cl_auth->au_flavor);
+	data->selected_flavor = nfss->client->cl_auth->au_flavor;
+	data->auth_info = nfss->auth_info;
 	data->acregmin = nfss->acregmin / HZ;
 	data->acregmax = nfss->acregmax / HZ;
 	data->acdirmin = nfss->acdirmin / HZ;
@@ -2197,12 +2244,14 @@
 	data->timeo = 10U * nfss->client->cl_timeout->to_initval / HZ;
 	data->nfs_server.port = nfss->port;
 	data->nfs_server.addrlen = nfss->nfs_client->cl_addrlen;
+	data->version = nfsvers;
+	data->minorversion = nfss->nfs_client->cl_minorversion;
 	memcpy(&data->nfs_server.address, &nfss->nfs_client->cl_addr,
 		data->nfs_server.addrlen);
 
 	/* overwrite those values with any that were specified */
-	error = nfs_parse_mount_options((char *)options, data);
-	if (error < 0)
+	error = -EINVAL;
+	if (!nfs_parse_mount_options((char *)options, data))
 		goto out;
 
 	/*
@@ -2332,7 +2381,7 @@
 		goto Ebusy;
 	if (a->acdirmax != b->acdirmax)
 		goto Ebusy;
-	if (b->flags & NFS_MOUNT_SECFLAVOUR &&
+	if (b->auth_info.flavor_len > 0 &&
 	   clnt_a->cl_auth->au_flavor != clnt_b->cl_auth->au_flavor)
 		goto Ebusy;
 	return 1;
@@ -2530,6 +2579,7 @@
 			mntroot = ERR_PTR(error);
 			goto error_splat_bdi;
 		}
+		server->super = s;
 	}
 
 	if (!s->s_root) {
@@ -2713,9 +2763,9 @@
 					   data->auth_flavours,
 					   sizeof(pseudoflavor)))
 				return -EFAULT;
-			nfs_set_auth_parsed_mount_data(args, pseudoflavor);
+			args->selected_flavor = pseudoflavor;
 		} else
-			nfs_set_auth_parsed_mount_data(args, RPC_AUTH_UNIX);
+			args->selected_flavor = RPC_AUTH_UNIX;
 
 		c = strndup_user(data->hostname.data, NFS4_MAXNAMLEN);
 		if (IS_ERR(c))
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index bb939ed..0c29b1b 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -493,7 +493,7 @@
 	unsigned long long fileid;
 	struct dentry *sdentry;
 	struct rpc_task *task;
-	int            error = -EIO;
+	int            error = -EBUSY;
 
 	dfprintk(VFS, "NFS: silly-rename(%s/%s, ct=%d)\n",
 		dentry->d_parent->d_name.name, dentry->d_name.name,
@@ -503,7 +503,6 @@
 	/*
 	 * We don't allow a dentry to be silly-renamed twice.
 	 */
-	error = -EBUSY;
 	if (dentry->d_flags & DCACHE_NFSFS_RENAMED)
 		goto out;
 
diff --git a/fs/sysfs/Makefile b/fs/sysfs/Makefile
index 7a1ceb9..8876ac1 100644
--- a/fs/sysfs/Makefile
+++ b/fs/sysfs/Makefile
@@ -2,5 +2,4 @@
 # Makefile for the sysfs virtual filesystem
 #
 
-obj-y		:= inode.o file.o dir.o symlink.o mount.o bin.o \
-		   group.o
+obj-y		:= inode.o file.o dir.o symlink.o mount.o group.o
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
deleted file mode 100644
index c590cab..0000000
--- a/fs/sysfs/bin.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * fs/sysfs/bin.c - sysfs binary file implementation
- *
- * Copyright (c) 2003 Patrick Mochel
- * Copyright (c) 2003 Matthew Wilcox
- * Copyright (c) 2004 Silicon Graphics, Inc.
- * Copyright (c) 2007 SUSE Linux Products GmbH
- * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
- *
- * This file is released under the GPLv2.
- *
- * Please see Documentation/filesystems/sysfs.txt for more information.
- */
-
-#undef DEBUG
-
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/kobject.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-
-#include "sysfs.h"
-
-/*
- * There's one bin_buffer for each open file.
- *
- * filp->private_data points to bin_buffer and
- * sysfs_dirent->s_bin_attr.buffers points to a the bin_buffer s
- * sysfs_dirent->s_bin_attr.buffers is protected by sysfs_bin_lock
- */
-static DEFINE_MUTEX(sysfs_bin_lock);
-
-struct bin_buffer {
-	struct mutex			mutex;
-	void				*buffer;
-	int				mmapped;
-	const struct vm_operations_struct *vm_ops;
-	struct file			*file;
-	struct hlist_node		list;
-};
-
-static int
-fill_read(struct file *file, char *buffer, loff_t off, size_t count)
-{
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	struct bin_attribute *attr = attr_sd->s_bin_attr.bin_attr;
-	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	int rc;
-
-	/* need attr_sd for attr, its parent for kobj */
-	if (!sysfs_get_active(attr_sd))
-		return -ENODEV;
-
-	rc = -EIO;
-	if (attr->read)
-		rc = attr->read(file, kobj, attr, buffer, off, count);
-
-	sysfs_put_active(attr_sd);
-
-	return rc;
-}
-
-static ssize_t
-read(struct file *file, char __user *userbuf, size_t bytes, loff_t *off)
-{
-	struct bin_buffer *bb = file->private_data;
-	int size = file_inode(file)->i_size;
-	loff_t offs = *off;
-	int count = min_t(size_t, bytes, PAGE_SIZE);
-	char *temp;
-
-	if (!bytes)
-		return 0;
-
-	if (size) {
-		if (offs > size)
-			return 0;
-		if (offs + count > size)
-			count = size - offs;
-	}
-
-	temp = kmalloc(count, GFP_KERNEL);
-	if (!temp)
-		return -ENOMEM;
-
-	mutex_lock(&bb->mutex);
-
-	count = fill_read(file, bb->buffer, offs, count);
-	if (count < 0) {
-		mutex_unlock(&bb->mutex);
-		goto out_free;
-	}
-
-	memcpy(temp, bb->buffer, count);
-
-	mutex_unlock(&bb->mutex);
-
-	if (copy_to_user(userbuf, temp, count)) {
-		count = -EFAULT;
-		goto out_free;
-	}
-
-	pr_debug("offs = %lld, *off = %lld, count = %d\n", offs, *off, count);
-
-	*off = offs + count;
-
- out_free:
-	kfree(temp);
-	return count;
-}
-
-static int
-flush_write(struct file *file, char *buffer, loff_t offset, size_t count)
-{
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	struct bin_attribute *attr = attr_sd->s_bin_attr.bin_attr;
-	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	int rc;
-
-	/* need attr_sd for attr, its parent for kobj */
-	if (!sysfs_get_active(attr_sd))
-		return -ENODEV;
-
-	rc = -EIO;
-	if (attr->write)
-		rc = attr->write(file, kobj, attr, buffer, offset, count);
-
-	sysfs_put_active(attr_sd);
-
-	return rc;
-}
-
-static ssize_t write(struct file *file, const char __user *userbuf,
-		     size_t bytes, loff_t *off)
-{
-	struct bin_buffer *bb = file->private_data;
-	int size = file_inode(file)->i_size;
-	loff_t offs = *off;
-	int count = min_t(size_t, bytes, PAGE_SIZE);
-	char *temp;
-
-	if (!bytes)
-		return 0;
-
-	if (size) {
-		if (offs > size)
-			return 0;
-		if (offs + count > size)
-			count = size - offs;
-	}
-
-	temp = memdup_user(userbuf, count);
-	if (IS_ERR(temp))
-		return PTR_ERR(temp);
-
-	mutex_lock(&bb->mutex);
-
-	memcpy(bb->buffer, temp, count);
-
-	count = flush_write(file, bb->buffer, offs, count);
-	mutex_unlock(&bb->mutex);
-
-	if (count > 0)
-		*off = offs + count;
-
-	kfree(temp);
-	return count;
-}
-
-static void bin_vma_open(struct vm_area_struct *vma)
-{
-	struct file *file = vma->vm_file;
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-
-	if (!bb->vm_ops)
-		return;
-
-	if (!sysfs_get_active(attr_sd))
-		return;
-
-	if (bb->vm_ops->open)
-		bb->vm_ops->open(vma);
-
-	sysfs_put_active(attr_sd);
-}
-
-static int bin_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
-{
-	struct file *file = vma->vm_file;
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	int ret;
-
-	if (!bb->vm_ops)
-		return VM_FAULT_SIGBUS;
-
-	if (!sysfs_get_active(attr_sd))
-		return VM_FAULT_SIGBUS;
-
-	ret = VM_FAULT_SIGBUS;
-	if (bb->vm_ops->fault)
-		ret = bb->vm_ops->fault(vma, vmf);
-
-	sysfs_put_active(attr_sd);
-	return ret;
-}
-
-static int bin_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
-{
-	struct file *file = vma->vm_file;
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	int ret;
-
-	if (!bb->vm_ops)
-		return VM_FAULT_SIGBUS;
-
-	if (!sysfs_get_active(attr_sd))
-		return VM_FAULT_SIGBUS;
-
-	ret = 0;
-	if (bb->vm_ops->page_mkwrite)
-		ret = bb->vm_ops->page_mkwrite(vma, vmf);
-	else
-		file_update_time(file);
-
-	sysfs_put_active(attr_sd);
-	return ret;
-}
-
-static int bin_access(struct vm_area_struct *vma, unsigned long addr,
-		  void *buf, int len, int write)
-{
-	struct file *file = vma->vm_file;
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	int ret;
-
-	if (!bb->vm_ops)
-		return -EINVAL;
-
-	if (!sysfs_get_active(attr_sd))
-		return -EINVAL;
-
-	ret = -EINVAL;
-	if (bb->vm_ops->access)
-		ret = bb->vm_ops->access(vma, addr, buf, len, write);
-
-	sysfs_put_active(attr_sd);
-	return ret;
-}
-
-#ifdef CONFIG_NUMA
-static int bin_set_policy(struct vm_area_struct *vma, struct mempolicy *new)
-{
-	struct file *file = vma->vm_file;
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	int ret;
-
-	if (!bb->vm_ops)
-		return 0;
-
-	if (!sysfs_get_active(attr_sd))
-		return -EINVAL;
-
-	ret = 0;
-	if (bb->vm_ops->set_policy)
-		ret = bb->vm_ops->set_policy(vma, new);
-
-	sysfs_put_active(attr_sd);
-	return ret;
-}
-
-static struct mempolicy *bin_get_policy(struct vm_area_struct *vma,
-					unsigned long addr)
-{
-	struct file *file = vma->vm_file;
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	struct mempolicy *pol;
-
-	if (!bb->vm_ops)
-		return vma->vm_policy;
-
-	if (!sysfs_get_active(attr_sd))
-		return vma->vm_policy;
-
-	pol = vma->vm_policy;
-	if (bb->vm_ops->get_policy)
-		pol = bb->vm_ops->get_policy(vma, addr);
-
-	sysfs_put_active(attr_sd);
-	return pol;
-}
-
-static int bin_migrate(struct vm_area_struct *vma, const nodemask_t *from,
-			const nodemask_t *to, unsigned long flags)
-{
-	struct file *file = vma->vm_file;
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	int ret;
-
-	if (!bb->vm_ops)
-		return 0;
-
-	if (!sysfs_get_active(attr_sd))
-		return 0;
-
-	ret = 0;
-	if (bb->vm_ops->migrate)
-		ret = bb->vm_ops->migrate(vma, from, to, flags);
-
-	sysfs_put_active(attr_sd);
-	return ret;
-}
-#endif
-
-static const struct vm_operations_struct bin_vm_ops = {
-	.open		= bin_vma_open,
-	.fault		= bin_fault,
-	.page_mkwrite	= bin_page_mkwrite,
-	.access		= bin_access,
-#ifdef CONFIG_NUMA
-	.set_policy	= bin_set_policy,
-	.get_policy	= bin_get_policy,
-	.migrate	= bin_migrate,
-#endif
-};
-
-static int mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct bin_buffer *bb = file->private_data;
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	struct bin_attribute *attr = attr_sd->s_bin_attr.bin_attr;
-	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	int rc;
-
-	mutex_lock(&bb->mutex);
-
-	/* need attr_sd for attr, its parent for kobj */
-	rc = -ENODEV;
-	if (!sysfs_get_active(attr_sd))
-		goto out_unlock;
-
-	rc = -EINVAL;
-	if (!attr->mmap)
-		goto out_put;
-
-	rc = attr->mmap(file, kobj, attr, vma);
-	if (rc)
-		goto out_put;
-
-	/*
-	 * PowerPC's pci_mmap of legacy_mem uses shmem_zero_setup()
-	 * to satisfy versions of X which crash if the mmap fails: that
-	 * substitutes a new vm_file, and we don't then want bin_vm_ops.
-	 */
-	if (vma->vm_file != file)
-		goto out_put;
-
-	rc = -EINVAL;
-	if (bb->mmapped && bb->vm_ops != vma->vm_ops)
-		goto out_put;
-
-	/*
-	 * It is not possible to successfully wrap close.
-	 * So error if someone is trying to use close.
-	 */
-	rc = -EINVAL;
-	if (vma->vm_ops && vma->vm_ops->close)
-		goto out_put;
-
-	rc = 0;
-	bb->mmapped = 1;
-	bb->vm_ops = vma->vm_ops;
-	vma->vm_ops = &bin_vm_ops;
-out_put:
-	sysfs_put_active(attr_sd);
-out_unlock:
-	mutex_unlock(&bb->mutex);
-
-	return rc;
-}
-
-static int open(struct inode *inode, struct file *file)
-{
-	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
-	struct bin_attribute *attr = attr_sd->s_bin_attr.bin_attr;
-	struct bin_buffer *bb = NULL;
-	int error;
-
-	/* binary file operations requires both @sd and its parent */
-	if (!sysfs_get_active(attr_sd))
-		return -ENODEV;
-
-	error = -EACCES;
-	if ((file->f_mode & FMODE_WRITE) && !(attr->write || attr->mmap))
-		goto err_out;
-	if ((file->f_mode & FMODE_READ) && !(attr->read || attr->mmap))
-		goto err_out;
-
-	error = -ENOMEM;
-	bb = kzalloc(sizeof(*bb), GFP_KERNEL);
-	if (!bb)
-		goto err_out;
-
-	bb->buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!bb->buffer)
-		goto err_out;
-
-	mutex_init(&bb->mutex);
-	bb->file = file;
-	file->private_data = bb;
-
-	mutex_lock(&sysfs_bin_lock);
-	hlist_add_head(&bb->list, &attr_sd->s_bin_attr.buffers);
-	mutex_unlock(&sysfs_bin_lock);
-
-	/* open succeeded, put active references */
-	sysfs_put_active(attr_sd);
-	return 0;
-
- err_out:
-	sysfs_put_active(attr_sd);
-	kfree(bb);
-	return error;
-}
-
-static int release(struct inode *inode, struct file *file)
-{
-	struct bin_buffer *bb = file->private_data;
-
-	mutex_lock(&sysfs_bin_lock);
-	hlist_del(&bb->list);
-	mutex_unlock(&sysfs_bin_lock);
-
-	kfree(bb->buffer);
-	kfree(bb);
-	return 0;
-}
-
-const struct file_operations bin_fops = {
-	.read		= read,
-	.write		= write,
-	.mmap		= mmap,
-	.llseek		= generic_file_llseek,
-	.open		= open,
-	.release	= release,
-};
-
-
-void unmap_bin_file(struct sysfs_dirent *attr_sd)
-{
-	struct bin_buffer *bb;
-
-	if (sysfs_type(attr_sd) != SYSFS_KOBJ_BIN_ATTR)
-		return;
-
-	mutex_lock(&sysfs_bin_lock);
-
-	hlist_for_each_entry(bb, &attr_sd->s_bin_attr.buffers, list) {
-		struct inode *inode = file_inode(bb->file);
-
-		unmap_mapping_range(inode->i_mapping, 0, 0, 1);
-	}
-
-	mutex_unlock(&sysfs_bin_lock);
-}
-
-/**
- *	sysfs_create_bin_file - create binary file for object.
- *	@kobj:	object.
- *	@attr:	attribute descriptor.
- */
-int sysfs_create_bin_file(struct kobject *kobj,
-			  const struct bin_attribute *attr)
-{
-	BUG_ON(!kobj || !kobj->sd || !attr);
-
-	return sysfs_add_file(kobj->sd, &attr->attr, SYSFS_KOBJ_BIN_ATTR);
-}
-EXPORT_SYMBOL_GPL(sysfs_create_bin_file);
-
-/**
- *	sysfs_remove_bin_file - remove binary file for object.
- *	@kobj:	object.
- *	@attr:	attribute descriptor.
- */
-void sysfs_remove_bin_file(struct kobject *kobj,
-			   const struct bin_attribute *attr)
-{
-	sysfs_hash_and_remove(kobj->sd, NULL, attr->attr.name);
-}
-EXPORT_SYMBOL_GPL(sysfs_remove_bin_file);
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 4d83ced..5e73d66 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -26,21 +26,21 @@
 #include "sysfs.h"
 
 DEFINE_MUTEX(sysfs_mutex);
-DEFINE_SPINLOCK(sysfs_assoc_lock);
+DEFINE_SPINLOCK(sysfs_symlink_target_lock);
 
-#define to_sysfs_dirent(X) rb_entry((X), struct sysfs_dirent, s_rb);
+#define to_sysfs_dirent(X) rb_entry((X), struct sysfs_dirent, s_rb)
 
 static DEFINE_SPINLOCK(sysfs_ino_lock);
 static DEFINE_IDA(sysfs_ino_ida);
 
 /**
  *	sysfs_name_hash
- *	@ns:   Namespace tag to hash
  *	@name: Null terminated string to hash
+ *	@ns:   Namespace tag to hash
  *
  *	Returns 31 bit hash of ns + name (so it fits in an off_t )
  */
-static unsigned int sysfs_name_hash(const void *ns, const char *name)
+static unsigned int sysfs_name_hash(const char *name, const void *ns)
 {
 	unsigned long hash = init_name_hash();
 	unsigned int len = strlen(name);
@@ -56,8 +56,8 @@
 	return hash;
 }
 
-static int sysfs_name_compare(unsigned int hash, const void *ns,
-	const char *name, const struct sysfs_dirent *sd)
+static int sysfs_name_compare(unsigned int hash, const char *name,
+			      const void *ns, const struct sysfs_dirent *sd)
 {
 	if (hash != sd->s_hash)
 		return hash - sd->s_hash;
@@ -69,7 +69,7 @@
 static int sysfs_sd_compare(const struct sysfs_dirent *left,
 			    const struct sysfs_dirent *right)
 {
-	return sysfs_name_compare(left->s_hash, left->s_ns, left->s_name,
+	return sysfs_name_compare(left->s_hash, left->s_name, left->s_ns,
 				  right);
 }
 
@@ -132,24 +132,6 @@
 	rb_erase(&sd->s_rb, &sd->s_parent->s_dir.children);
 }
 
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-
-/* Test for attributes that want to ignore lockdep for read-locking */
-static bool ignore_lockdep(struct sysfs_dirent *sd)
-{
-	return sysfs_type(sd) == SYSFS_KOBJ_ATTR &&
-			sd->s_attr.attr->ignore_lockdep;
-}
-
-#else
-
-static inline bool ignore_lockdep(struct sysfs_dirent *sd)
-{
-	return true;
-}
-
-#endif
-
 /**
  *	sysfs_get_active - get an active reference to sysfs_dirent
  *	@sd: sysfs_dirent to get an active reference to
@@ -168,7 +150,7 @@
 	if (!atomic_inc_unless_negative(&sd->s_active))
 		return NULL;
 
-	if (likely(!ignore_lockdep(sd)))
+	if (likely(!sysfs_ignore_lockdep(sd)))
 		rwsem_acquire_read(&sd->dep_map, 0, 1, _RET_IP_);
 	return sd;
 }
@@ -187,7 +169,7 @@
 	if (unlikely(!sd))
 		return;
 
-	if (likely(!ignore_lockdep(sd)))
+	if (likely(!sysfs_ignore_lockdep(sd)))
 		rwsem_release(&sd->dep_map, 1, _RET_IP_);
 	v = atomic_dec_return(&sd->s_active);
 	if (likely(v != SD_DEACTIVATED_BIAS))
@@ -400,22 +382,19 @@
 /**
  *	sysfs_addrm_start - prepare for sysfs_dirent add/remove
  *	@acxt: pointer to sysfs_addrm_cxt to be used
- *	@parent_sd: parent sysfs_dirent
  *
- *	This function is called when the caller is about to add or
- *	remove sysfs_dirent under @parent_sd.  This function acquires
- *	sysfs_mutex.  @acxt is used to keep and pass context to
- *	other addrm functions.
+ *	This function is called when the caller is about to add or remove
+ *	sysfs_dirent.  This function acquires sysfs_mutex.  @acxt is used
+ *	to keep and pass context to other addrm functions.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep).  sysfs_mutex is locked on
  *	return.
  */
-void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
-		       struct sysfs_dirent *parent_sd)
+void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt)
+	__acquires(sysfs_mutex)
 {
 	memset(acxt, 0, sizeof(*acxt));
-	acxt->parent_sd = parent_sd;
 
 	mutex_lock(&sysfs_mutex);
 }
@@ -424,10 +403,11 @@
  *	__sysfs_add_one - add sysfs_dirent to parent without warning
  *	@acxt: addrm context to use
  *	@sd: sysfs_dirent to be added
+ *	@parent_sd: the parent sysfs_dirent to add @sd to
  *
- *	Get @acxt->parent_sd and set sd->s_parent to it and increment
- *	nlink of parent inode if @sd is a directory and link into the
- *	children list of the parent.
+ *	Get @parent_sd and set @sd->s_parent to it and increment nlink of
+ *	the parent inode if @sd is a directory and link into the children
+ *	list of the parent.
  *
  *	This function should be called between calls to
  *	sysfs_addrm_start() and sysfs_addrm_finish() and should be
@@ -440,27 +420,28 @@
  *	0 on success, -EEXIST if entry with the given name already
  *	exists.
  */
-int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
+int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd,
+		    struct sysfs_dirent *parent_sd)
 {
 	struct sysfs_inode_attrs *ps_iattr;
 	int ret;
 
-	if (!!sysfs_ns_type(acxt->parent_sd) != !!sd->s_ns) {
+	if (!!sysfs_ns_type(parent_sd) != !!sd->s_ns) {
 		WARN(1, KERN_WARNING "sysfs: ns %s in '%s' for '%s'\n",
-			sysfs_ns_type(acxt->parent_sd) ? "required" : "invalid",
-			acxt->parent_sd->s_name, sd->s_name);
+			sysfs_ns_type(parent_sd) ? "required" : "invalid",
+			parent_sd->s_name, sd->s_name);
 		return -EINVAL;
 	}
 
-	sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
-	sd->s_parent = sysfs_get(acxt->parent_sd);
+	sd->s_hash = sysfs_name_hash(sd->s_name, sd->s_ns);
+	sd->s_parent = sysfs_get(parent_sd);
 
 	ret = sysfs_link_sibling(sd);
 	if (ret)
 		return ret;
 
 	/* Update timestamps on the parent */
-	ps_iattr = acxt->parent_sd->s_iattr;
+	ps_iattr = parent_sd->s_iattr;
 	if (ps_iattr) {
 		struct iattr *ps_iattrs = &ps_iattr->ia_iattr;
 		ps_iattrs->ia_ctime = ps_iattrs->ia_mtime = CURRENT_TIME;
@@ -490,14 +471,32 @@
 	return path;
 }
 
+void sysfs_warn_dup(struct sysfs_dirent *parent, const char *name)
+{
+	char *path;
+
+	path = kzalloc(PATH_MAX, GFP_KERNEL);
+	if (path) {
+		sysfs_pathname(parent, path);
+		strlcat(path, "/", PATH_MAX);
+		strlcat(path, name, PATH_MAX);
+	}
+
+	WARN(1, KERN_WARNING "sysfs: cannot create duplicate filename '%s'\n",
+	     path ? path : name);
+
+	kfree(path);
+}
+
 /**
  *	sysfs_add_one - add sysfs_dirent to parent
  *	@acxt: addrm context to use
  *	@sd: sysfs_dirent to be added
+ *	@parent_sd: the parent sysfs_dirent to add @sd to
  *
- *	Get @acxt->parent_sd and set sd->s_parent to it and increment
- *	nlink of parent inode if @sd is a directory and link into the
- *	children list of the parent.
+ *	Get @parent_sd and set @sd->s_parent to it and increment nlink of
+ *	the parent inode if @sd is a directory and link into the children
+ *	list of the parent.
  *
  *	This function should be called between calls to
  *	sysfs_addrm_start() and sysfs_addrm_finish() and should be
@@ -510,23 +509,15 @@
  *	0 on success, -EEXIST if entry with the given name already
  *	exists.
  */
-int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
+int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd,
+		  struct sysfs_dirent *parent_sd)
 {
 	int ret;
 
-	ret = __sysfs_add_one(acxt, sd);
-	if (ret == -EEXIST) {
-		char *path = kzalloc(PATH_MAX, GFP_KERNEL);
-		WARN(1, KERN_WARNING
-		     "sysfs: cannot create duplicate filename '%s'\n",
-		     (path == NULL) ? sd->s_name
-				    : (sysfs_pathname(acxt->parent_sd, path),
-				       strlcat(path, "/", PATH_MAX),
-				       strlcat(path, sd->s_name, PATH_MAX),
-				       path));
-		kfree(path);
-	}
+	ret = __sysfs_add_one(acxt, sd, parent_sd);
 
+	if (ret == -EEXIST)
+		sysfs_warn_dup(parent_sd, sd->s_name);
 	return ret;
 }
 
@@ -545,16 +536,22 @@
  *	LOCKING:
  *	Determined by sysfs_addrm_start().
  */
-void sysfs_remove_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
+static void sysfs_remove_one(struct sysfs_addrm_cxt *acxt,
+			     struct sysfs_dirent *sd)
 {
 	struct sysfs_inode_attrs *ps_iattr;
 
-	BUG_ON(sd->s_flags & SYSFS_FLAG_REMOVED);
+	/*
+	 * Removal can be called multiple times on the same node.  Only the
+	 * first invocation is effective and puts the base ref.
+	 */
+	if (sd->s_flags & SYSFS_FLAG_REMOVED)
+		return;
 
 	sysfs_unlink_sibling(sd);
 
 	/* Update timestamps on the parent */
-	ps_iattr = acxt->parent_sd->s_iattr;
+	ps_iattr = sd->s_parent->s_iattr;
 	if (ps_iattr) {
 		struct iattr *ps_iattrs = &ps_iattr->ia_iattr;
 		ps_iattrs->ia_ctime = ps_iattrs->ia_mtime = CURRENT_TIME;
@@ -577,6 +574,7 @@
  *	sysfs_mutex is released.
  */
 void sysfs_addrm_finish(struct sysfs_addrm_cxt *acxt)
+	__releases(sysfs_mutex)
 {
 	/* release resources acquired by sysfs_addrm_start() */
 	mutex_unlock(&sysfs_mutex);
@@ -588,7 +586,7 @@
 		acxt->removed = sd->u.removed_list;
 
 		sysfs_deactivate(sd);
-		unmap_bin_file(sd);
+		sysfs_unmap_bin_file(sd);
 		sysfs_put(sd);
 	}
 }
@@ -597,6 +595,7 @@
  *	sysfs_find_dirent - find sysfs_dirent with the given name
  *	@parent_sd: sysfs_dirent to search under
  *	@name: name to look for
+ *	@ns: the namespace tag to use
  *
  *	Look for sysfs_dirent with name @name under @parent_sd.
  *
@@ -607,8 +606,8 @@
  *	Pointer to sysfs_dirent if found, NULL if not.
  */
 struct sysfs_dirent *sysfs_find_dirent(struct sysfs_dirent *parent_sd,
-				       const void *ns,
-				       const unsigned char *name)
+				       const unsigned char *name,
+				       const void *ns)
 {
 	struct rb_node *node = parent_sd->s_dir.children.rb_node;
 	unsigned int hash;
@@ -620,13 +619,13 @@
 		return NULL;
 	}
 
-	hash = sysfs_name_hash(ns, name);
+	hash = sysfs_name_hash(name, ns);
 	while (node) {
 		struct sysfs_dirent *sd;
 		int result;
 
 		sd = to_sysfs_dirent(node);
-		result = sysfs_name_compare(hash, ns, name, sd);
+		result = sysfs_name_compare(hash, name, ns, sd);
 		if (result < 0)
 			node = node->rb_left;
 		else if (result > 0)
@@ -638,9 +637,10 @@
 }
 
 /**
- *	sysfs_get_dirent - find and get sysfs_dirent with the given name
+ *	sysfs_get_dirent_ns - find and get sysfs_dirent with the given name
  *	@parent_sd: sysfs_dirent to search under
  *	@name: name to look for
+ *	@ns: the namespace tag to use
  *
  *	Look for sysfs_dirent with name @name under @parent_sd and get
  *	it if found.
@@ -651,24 +651,25 @@
  *	RETURNS:
  *	Pointer to sysfs_dirent if found, NULL if not.
  */
-struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
-				      const void *ns,
-				      const unsigned char *name)
+struct sysfs_dirent *sysfs_get_dirent_ns(struct sysfs_dirent *parent_sd,
+					 const unsigned char *name,
+					 const void *ns)
 {
 	struct sysfs_dirent *sd;
 
 	mutex_lock(&sysfs_mutex);
-	sd = sysfs_find_dirent(parent_sd, ns, name);
+	sd = sysfs_find_dirent(parent_sd, name, ns);
 	sysfs_get(sd);
 	mutex_unlock(&sysfs_mutex);
 
 	return sd;
 }
-EXPORT_SYMBOL_GPL(sysfs_get_dirent);
+EXPORT_SYMBOL_GPL(sysfs_get_dirent_ns);
 
 static int create_dir(struct kobject *kobj, struct sysfs_dirent *parent_sd,
-	enum kobj_ns_type type, const void *ns, const char *name,
-	struct sysfs_dirent **p_sd)
+		      enum kobj_ns_type type,
+		      const char *name, const void *ns,
+		      struct sysfs_dirent **p_sd)
 {
 	umode_t mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO;
 	struct sysfs_addrm_cxt acxt;
@@ -685,8 +686,8 @@
 	sd->s_dir.kobj = kobj;
 
 	/* link in */
-	sysfs_addrm_start(&acxt, parent_sd);
-	rc = sysfs_add_one(&acxt, sd);
+	sysfs_addrm_start(&acxt);
+	rc = sysfs_add_one(&acxt, sd, parent_sd);
 	sysfs_addrm_finish(&acxt);
 
 	if (rc == 0)
@@ -701,7 +702,7 @@
 			struct sysfs_dirent **p_sd)
 {
 	return create_dir(kobj, kobj->sd,
-			  KOBJ_NS_TYPE_NONE, NULL, name, p_sd);
+			  KOBJ_NS_TYPE_NONE, name, NULL, p_sd);
 }
 
 /**
@@ -730,14 +731,14 @@
 }
 
 /**
- *	sysfs_create_dir - create a directory for an object.
- *	@kobj:		object we're creating directory for.
+ * sysfs_create_dir_ns - create a directory for an object with a namespace tag
+ * @kobj: object we're creating directory for
+ * @ns: the namespace tag to use
  */
-int sysfs_create_dir(struct kobject *kobj)
+int sysfs_create_dir_ns(struct kobject *kobj, const void *ns)
 {
 	enum kobj_ns_type type;
 	struct sysfs_dirent *parent_sd, *sd;
-	const void *ns = NULL;
 	int error = 0;
 
 	BUG_ON(!kobj);
@@ -750,11 +751,9 @@
 	if (!parent_sd)
 		return -ENOENT;
 
-	if (sysfs_ns_type(parent_sd))
-		ns = kobj->ktype->namespace(kobj);
 	type = sysfs_read_ns_type(kobj);
 
-	error = create_dir(kobj, parent_sd, type, ns, kobject_name(kobj), &sd);
+	error = create_dir(kobj, parent_sd, type, kobject_name(kobj), ns, &sd);
 	if (!error)
 		kobj->sd = sd;
 	return error;
@@ -776,7 +775,7 @@
 	type = sysfs_ns_type(parent_sd);
 	ns = sysfs_info(dir->i_sb)->ns[type];
 
-	sd = sysfs_find_dirent(parent_sd, ns, dentry->d_name.name);
+	sd = sysfs_find_dirent(parent_sd, dentry->d_name.name, ns);
 
 	/* no such entry */
 	if (!sd) {
@@ -807,41 +806,128 @@
 	.setxattr	= sysfs_setxattr,
 };
 
-static void remove_dir(struct sysfs_dirent *sd)
+static struct sysfs_dirent *sysfs_leftmost_descendant(struct sysfs_dirent *pos)
 {
-	struct sysfs_addrm_cxt acxt;
+	struct sysfs_dirent *last;
 
-	sysfs_addrm_start(&acxt, sd->s_parent);
-	sysfs_remove_one(&acxt, sd);
-	sysfs_addrm_finish(&acxt);
+	while (true) {
+		struct rb_node *rbn;
+
+		last = pos;
+
+		if (sysfs_type(pos) != SYSFS_DIR)
+			break;
+
+		rbn = rb_first(&pos->s_dir.children);
+		if (!rbn)
+			break;
+
+		pos = to_sysfs_dirent(rbn);
+	}
+
+	return last;
 }
 
-void sysfs_remove_subdir(struct sysfs_dirent *sd)
+/**
+ * sysfs_next_descendant_post - find the next descendant for post-order walk
+ * @pos: the current position (%NULL to initiate traversal)
+ * @root: sysfs_dirent whose descendants to walk
+ *
+ * Find the next descendant to visit for post-order traversal of @root's
+ * descendants.  @root is included in the iteration and the last node to be
+ * visited.
+ */
+static struct sysfs_dirent *sysfs_next_descendant_post(struct sysfs_dirent *pos,
+						       struct sysfs_dirent *root)
 {
-	remove_dir(sd);
+	struct rb_node *rbn;
+
+	lockdep_assert_held(&sysfs_mutex);
+
+	/* if first iteration, visit leftmost descendant which may be root */
+	if (!pos)
+		return sysfs_leftmost_descendant(root);
+
+	/* if we visited @root, we're done */
+	if (pos == root)
+		return NULL;
+
+	/* if there's an unvisited sibling, visit its leftmost descendant */
+	rbn = rb_next(&pos->s_rb);
+	if (rbn)
+		return sysfs_leftmost_descendant(to_sysfs_dirent(rbn));
+
+	/* no sibling left, visit parent */
+	return pos->s_parent;
 }
 
-
-static void __sysfs_remove_dir(struct sysfs_dirent *dir_sd)
+static void __sysfs_remove(struct sysfs_addrm_cxt *acxt,
+			   struct sysfs_dirent *sd)
 {
-	struct sysfs_addrm_cxt acxt;
-	struct rb_node *pos;
+	struct sysfs_dirent *pos, *next;
 
-	if (!dir_sd)
+	if (!sd)
 		return;
 
-	pr_debug("sysfs %s: removing dir\n", dir_sd->s_name);
-	sysfs_addrm_start(&acxt, dir_sd);
-	pos = rb_first(&dir_sd->s_dir.children);
-	while (pos) {
-		struct sysfs_dirent *sd = to_sysfs_dirent(pos);
-		pos = rb_next(pos);
-		if (sysfs_type(sd) != SYSFS_DIR)
-			sysfs_remove_one(&acxt, sd);
+	pr_debug("sysfs %s: removing\n", sd->s_name);
+
+	next = NULL;
+	do {
+		pos = next;
+		next = sysfs_next_descendant_post(pos, sd);
+		if (pos)
+			sysfs_remove_one(acxt, pos);
+	} while (next);
+}
+
+/**
+ * sysfs_remove - remove a sysfs_dirent recursively
+ * @sd: the sysfs_dirent to remove
+ *
+ * Remove @sd along with all its subdirectories and files.
+ */
+void sysfs_remove(struct sysfs_dirent *sd)
+{
+	struct sysfs_addrm_cxt acxt;
+
+	sysfs_addrm_start(&acxt);
+	__sysfs_remove(&acxt, sd);
+	sysfs_addrm_finish(&acxt);
+}
+
+/**
+ * sysfs_hash_and_remove - find a sysfs_dirent by name and remove it
+ * @dir_sd: parent of the target
+ * @name: name of the sysfs_dirent to remove
+ * @ns: namespace tag of the sysfs_dirent to remove
+ *
+ * Look for the sysfs_dirent with @name and @ns under @dir_sd and remove
+ * it.  Returns 0 on success, -ENOENT if such entry doesn't exist.
+ */
+int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name,
+			  const void *ns)
+{
+	struct sysfs_addrm_cxt acxt;
+	struct sysfs_dirent *sd;
+
+	if (!dir_sd) {
+		WARN(1, KERN_WARNING "sysfs: can not remove '%s', no directory\n",
+			name);
+		return -ENOENT;
 	}
+
+	sysfs_addrm_start(&acxt);
+
+	sd = sysfs_find_dirent(dir_sd, name, ns);
+	if (sd)
+		__sysfs_remove(&acxt, sd);
+
 	sysfs_addrm_finish(&acxt);
 
-	remove_dir(dir_sd);
+	if (sd)
+		return 0;
+	else
+		return -ENOENT;
 }
 
 /**
@@ -852,21 +938,34 @@
  *	the directory before we remove the directory, and we've inlined
  *	what used to be sysfs_rmdir() below, instead of calling separately.
  */
-
 void sysfs_remove_dir(struct kobject *kobj)
 {
 	struct sysfs_dirent *sd = kobj->sd;
 
-	spin_lock(&sysfs_assoc_lock);
+	/*
+	 * In general, kboject owner is responsible for ensuring removal
+	 * doesn't race with other operations and sysfs doesn't provide any
+	 * protection; however, when @kobj is used as a symlink target, the
+	 * symlinking entity usually doesn't own @kobj and thus has no
+	 * control over removal.  @kobj->sd may be removed anytime and
+	 * symlink code may end up dereferencing an already freed sd.
+	 *
+	 * sysfs_symlink_target_lock synchronizes @kobj->sd disassociation
+	 * against symlink operations so that symlink code can safely
+	 * dereference @kobj->sd.
+	 */
+	spin_lock(&sysfs_symlink_target_lock);
 	kobj->sd = NULL;
-	spin_unlock(&sysfs_assoc_lock);
+	spin_unlock(&sysfs_symlink_target_lock);
 
-	__sysfs_remove_dir(sd);
+	if (sd) {
+		WARN_ON_ONCE(sysfs_type(sd) != SYSFS_DIR);
+		sysfs_remove(sd);
+	}
 }
 
-int sysfs_rename(struct sysfs_dirent *sd,
-	struct sysfs_dirent *new_parent_sd, const void *new_ns,
-	const char *new_name)
+int sysfs_rename(struct sysfs_dirent *sd, struct sysfs_dirent *new_parent_sd,
+		 const char *new_name, const void *new_ns)
 {
 	int error;
 
@@ -878,7 +977,7 @@
 		goto out;	/* nothing to rename */
 
 	error = -EEXIST;
-	if (sysfs_find_dirent(new_parent_sd, new_ns, new_name))
+	if (sysfs_find_dirent(new_parent_sd, new_name, new_ns))
 		goto out;
 
 	/* rename sysfs_dirent */
@@ -899,7 +998,7 @@
 	sysfs_get(new_parent_sd);
 	sysfs_put(sd->s_parent);
 	sd->s_ns = new_ns;
-	sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
+	sd->s_hash = sysfs_name_hash(sd->s_name, sd->s_ns);
 	sd->s_parent = new_parent_sd;
 	sysfs_link_sibling(sd);
 
@@ -909,30 +1008,25 @@
 	return error;
 }
 
-int sysfs_rename_dir(struct kobject *kobj, const char *new_name)
+int sysfs_rename_dir_ns(struct kobject *kobj, const char *new_name,
+			const void *new_ns)
 {
 	struct sysfs_dirent *parent_sd = kobj->sd->s_parent;
-	const void *new_ns = NULL;
 
-	if (sysfs_ns_type(parent_sd))
-		new_ns = kobj->ktype->namespace(kobj);
-
-	return sysfs_rename(kobj->sd, parent_sd, new_ns, new_name);
+	return sysfs_rename(kobj->sd, parent_sd, new_name, new_ns);
 }
 
-int sysfs_move_dir(struct kobject *kobj, struct kobject *new_parent_kobj)
+int sysfs_move_dir_ns(struct kobject *kobj, struct kobject *new_parent_kobj,
+		      const void *new_ns)
 {
 	struct sysfs_dirent *sd = kobj->sd;
 	struct sysfs_dirent *new_parent_sd;
-	const void *new_ns = NULL;
 
 	BUG_ON(!sd->s_parent);
-	if (sysfs_ns_type(sd->s_parent))
-		new_ns = kobj->ktype->namespace(kobj);
 	new_parent_sd = new_parent_kobj && new_parent_kobj->sd ?
 		new_parent_kobj->sd : &sysfs_root;
 
-	return sysfs_rename(sd, new_parent_sd, new_ns, sd->s_name);
+	return sysfs_rename(sd, new_parent_sd, sd->s_name, new_ns);
 }
 
 /* Relationship between s_mode and the DT_xxx types */
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 15ef5eb..79b5da2 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -21,70 +21,114 @@
 #include <linux/mutex.h>
 #include <linux/limits.h>
 #include <linux/uaccess.h>
+#include <linux/seq_file.h>
+#include <linux/mm.h>
 
 #include "sysfs.h"
 
 /*
- * There's one sysfs_buffer for each open file and one
- * sysfs_open_dirent for each sysfs_dirent with one or more open
- * files.
+ * There's one sysfs_open_file for each open file and one sysfs_open_dirent
+ * for each sysfs_dirent with one or more open files.
  *
- * filp->private_data points to sysfs_buffer and
- * sysfs_dirent->s_attr.open points to sysfs_open_dirent.  s_attr.open
- * is protected by sysfs_open_dirent_lock.
+ * sysfs_dirent->s_attr.open points to sysfs_open_dirent.  s_attr.open is
+ * protected by sysfs_open_dirent_lock.
+ *
+ * filp->private_data points to seq_file whose ->private points to
+ * sysfs_open_file.  sysfs_open_files are chained at
+ * sysfs_open_dirent->files, which is protected by sysfs_open_file_mutex.
  */
 static DEFINE_SPINLOCK(sysfs_open_dirent_lock);
+static DEFINE_MUTEX(sysfs_open_file_mutex);
 
 struct sysfs_open_dirent {
 	atomic_t		refcnt;
 	atomic_t		event;
 	wait_queue_head_t	poll;
-	struct list_head	buffers; /* goes through sysfs_buffer.list */
+	struct list_head	files; /* goes through sysfs_open_file.list */
 };
 
-struct sysfs_buffer {
-	size_t			count;
-	loff_t			pos;
-	char			*page;
-	const struct sysfs_ops	*ops;
+struct sysfs_open_file {
+	struct sysfs_dirent	*sd;
+	struct file		*file;
 	struct mutex		mutex;
-	int			needs_read_fill;
 	int			event;
 	struct list_head	list;
+
+	bool			mmapped;
+	const struct vm_operations_struct *vm_ops;
 };
 
-/**
- *	fill_read_buffer - allocate and fill buffer from object.
- *	@dentry:	dentry pointer.
- *	@buffer:	data buffer for file.
- *
- *	Allocate @buffer->page, if it hasn't been already, then call the
- *	kobject's show() method to fill the buffer with this attribute's
- *	data.
- *	This is called only once, on the file's first read unless an error
- *	is returned.
- */
-static int fill_read_buffer(struct dentry *dentry, struct sysfs_buffer *buffer)
+static bool sysfs_is_bin(struct sysfs_dirent *sd)
 {
-	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
-	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	const struct sysfs_ops *ops = buffer->ops;
-	int ret = 0;
+	return sysfs_type(sd) == SYSFS_KOBJ_BIN_ATTR;
+}
+
+static struct sysfs_open_file *sysfs_of(struct file *file)
+{
+	return ((struct seq_file *)file->private_data)->private;
+}
+
+/*
+ * Determine ktype->sysfs_ops for the given sysfs_dirent.  This function
+ * must be called while holding an active reference.
+ */
+static const struct sysfs_ops *sysfs_file_ops(struct sysfs_dirent *sd)
+{
+	struct kobject *kobj = sd->s_parent->s_dir.kobj;
+
+	if (!sysfs_ignore_lockdep(sd))
+		lockdep_assert_held(sd);
+	return kobj->ktype ? kobj->ktype->sysfs_ops : NULL;
+}
+
+/*
+ * Reads on sysfs are handled through seq_file, which takes care of hairy
+ * details like buffering and seeking.  The following function pipes
+ * sysfs_ops->show() result through seq_file.
+ */
+static int sysfs_seq_show(struct seq_file *sf, void *v)
+{
+	struct sysfs_open_file *of = sf->private;
+	struct kobject *kobj = of->sd->s_parent->s_dir.kobj;
+	const struct sysfs_ops *ops;
+	char *buf;
 	ssize_t count;
 
-	if (!buffer->page)
-		buffer->page = (char *) get_zeroed_page(GFP_KERNEL);
-	if (!buffer->page)
-		return -ENOMEM;
+	/* acquire buffer and ensure that it's >= PAGE_SIZE */
+	count = seq_get_buf(sf, &buf);
+	if (count < PAGE_SIZE) {
+		seq_commit(sf, -1);
+		return 0;
+	}
 
-	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active(attr_sd))
+	/*
+	 * Need @of->sd for attr and ops, its parent for kobj.  @of->mutex
+	 * nests outside active ref and is just to ensure that the ops
+	 * aren't called concurrently for the same open file.
+	 */
+	mutex_lock(&of->mutex);
+	if (!sysfs_get_active(of->sd)) {
+		mutex_unlock(&of->mutex);
 		return -ENODEV;
+	}
 
-	buffer->event = atomic_read(&attr_sd->s_attr.open->event);
-	count = ops->show(kobj, attr_sd->s_attr.attr, buffer->page);
+	of->event = atomic_read(&of->sd->s_attr.open->event);
 
-	sysfs_put_active(attr_sd);
+	/*
+	 * Lookup @ops and invoke show().  Control may reach here via seq
+	 * file lseek even if @ops->show() isn't implemented.
+	 */
+	ops = sysfs_file_ops(of->sd);
+	if (ops->show)
+		count = ops->show(kobj, of->sd->s_attr.attr, buf);
+	else
+		count = 0;
+
+	sysfs_put_active(of->sd);
+	mutex_unlock(&of->mutex);
+
+	if (count < 0)
+		return count;
 
 	/*
 	 * The code works fine with PAGE_SIZE return but it's likely to
@@ -96,155 +140,389 @@
 		/* Try to struggle along */
 		count = PAGE_SIZE - 1;
 	}
-	if (count >= 0) {
-		buffer->needs_read_fill = 0;
-		buffer->count = count;
-	} else {
-		ret = count;
-	}
-	return ret;
+	seq_commit(sf, count);
+	return 0;
 }
 
-/**
- *	sysfs_read_file - read an attribute.
- *	@file:	file pointer.
- *	@buf:	buffer to fill.
- *	@count:	number of bytes to read.
- *	@ppos:	starting offset in file.
- *
- *	Userspace wants to read an attribute file. The attribute descriptor
- *	is in the file's ->d_fsdata. The target object is in the directory's
- *	->d_fsdata.
- *
- *	We call fill_read_buffer() to allocate and fill the buffer from the
- *	object's show() method exactly once (if the read is happening from
- *	the beginning of the file). That should fill the entire buffer with
- *	all the data the object has to offer for that attribute.
- *	We then call flush_read_buffer() to copy the buffer to userspace
- *	in the increments specified.
+/*
+ * Read method for bin files.  As reading a bin file can have side-effects,
+ * the exact offset and bytes specified in read(2) call should be passed to
+ * the read callback making it difficult to use seq_file.  Implement
+ * simplistic custom buffering for bin files.
  */
-
-static ssize_t
-sysfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+static ssize_t sysfs_bin_read(struct file *file, char __user *userbuf,
+			      size_t bytes, loff_t *off)
 {
-	struct sysfs_buffer *buffer = file->private_data;
-	ssize_t retval = 0;
+	struct sysfs_open_file *of = sysfs_of(file);
+	struct bin_attribute *battr = of->sd->s_attr.bin_attr;
+	struct kobject *kobj = of->sd->s_parent->s_dir.kobj;
+	loff_t size = file_inode(file)->i_size;
+	int count = min_t(size_t, bytes, PAGE_SIZE);
+	loff_t offs = *off;
+	char *buf;
 
-	mutex_lock(&buffer->mutex);
-	if (buffer->needs_read_fill || *ppos == 0) {
-		retval = fill_read_buffer(file->f_path.dentry, buffer);
-		if (retval)
-			goto out;
+	if (!bytes)
+		return 0;
+
+	if (size) {
+		if (offs > size)
+			return 0;
+		if (offs + count > size)
+			count = size - offs;
 	}
-	pr_debug("%s: count = %zd, ppos = %lld, buf = %s\n",
-		 __func__, count, *ppos, buffer->page);
-	retval = simple_read_from_buffer(buf, count, ppos, buffer->page,
-					 buffer->count);
-out:
-	mutex_unlock(&buffer->mutex);
-	return retval;
-}
 
-/**
- *	fill_write_buffer - copy buffer from userspace.
- *	@buffer:	data buffer for file.
- *	@buf:		data from user.
- *	@count:		number of bytes in @userbuf.
- *
- *	Allocate @buffer->page if it hasn't been already, then
- *	copy the user-supplied buffer into it.
- */
-static int fill_write_buffer(struct sysfs_buffer *buffer,
-			     const char __user *buf, size_t count)
-{
-	int error;
-
-	if (!buffer->page)
-		buffer->page = (char *)get_zeroed_page(GFP_KERNEL);
-	if (!buffer->page)
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
 		return -ENOMEM;
 
-	if (count >= PAGE_SIZE)
-		count = PAGE_SIZE - 1;
-	error = copy_from_user(buffer->page, buf, count);
-	buffer->needs_read_fill = 1;
-	/* if buf is assumed to contain a string, terminate it by \0,
-	   so e.g. sscanf() can scan the string easily */
-	buffer->page[count] = 0;
-	return error ? -EFAULT : count;
+	/* need of->sd for battr, its parent for kobj */
+	mutex_lock(&of->mutex);
+	if (!sysfs_get_active(of->sd)) {
+		count = -ENODEV;
+		mutex_unlock(&of->mutex);
+		goto out_free;
+	}
+
+	if (battr->read)
+		count = battr->read(file, kobj, battr, buf, offs, count);
+	else
+		count = -EIO;
+
+	sysfs_put_active(of->sd);
+	mutex_unlock(&of->mutex);
+
+	if (count < 0)
+		goto out_free;
+
+	if (copy_to_user(userbuf, buf, count)) {
+		count = -EFAULT;
+		goto out_free;
+	}
+
+	pr_debug("offs = %lld, *off = %lld, count = %d\n", offs, *off, count);
+
+	*off = offs + count;
+
+ out_free:
+	kfree(buf);
+	return count;
 }
 
-
 /**
- *	flush_write_buffer - push buffer to kobject.
- *	@dentry:	dentry to the attribute
- *	@buffer:	data buffer for file.
- *	@count:		number of bytes
+ * flush_write_buffer - push buffer to kobject
+ * @of: open file
+ * @buf: data buffer for file
+ * @off: file offset to write to
+ * @count: number of bytes
  *
- *	Get the correct pointers for the kobject and the attribute we're
- *	dealing with, then call the store() method for the attribute,
- *	passing the buffer that we acquired in fill_write_buffer().
+ * Get the correct pointers for the kobject and the attribute we're dealing
+ * with, then call the store() method for it with @buf.
  */
-static int flush_write_buffer(struct dentry *dentry,
-			      struct sysfs_buffer *buffer, size_t count)
+static int flush_write_buffer(struct sysfs_open_file *of, char *buf, loff_t off,
+			      size_t count)
 {
-	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
-	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	const struct sysfs_ops *ops = buffer->ops;
-	int rc;
+	struct kobject *kobj = of->sd->s_parent->s_dir.kobj;
+	int rc = 0;
 
-	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active(attr_sd))
+	/*
+	 * Need @of->sd for attr and ops, its parent for kobj.  @of->mutex
+	 * nests outside active ref and is just to ensure that the ops
+	 * aren't called concurrently for the same open file.
+	 */
+	mutex_lock(&of->mutex);
+	if (!sysfs_get_active(of->sd)) {
+		mutex_unlock(&of->mutex);
 		return -ENODEV;
+	}
 
-	rc = ops->store(kobj, attr_sd->s_attr.attr, buffer->page, count);
+	if (sysfs_is_bin(of->sd)) {
+		struct bin_attribute *battr = of->sd->s_attr.bin_attr;
 
-	sysfs_put_active(attr_sd);
+		rc = -EIO;
+		if (battr->write)
+			rc = battr->write(of->file, kobj, battr, buf, off,
+					  count);
+	} else {
+		const struct sysfs_ops *ops = sysfs_file_ops(of->sd);
+
+		rc = ops->store(kobj, of->sd->s_attr.attr, buf, count);
+	}
+
+	sysfs_put_active(of->sd);
+	mutex_unlock(&of->mutex);
 
 	return rc;
 }
 
-
 /**
- *	sysfs_write_file - write an attribute.
- *	@file:	file pointer
- *	@buf:	data to write
- *	@count:	number of bytes
- *	@ppos:	starting offset
+ * sysfs_write_file - write an attribute
+ * @file: file pointer
+ * @user_buf: data to write
+ * @count: number of bytes
+ * @ppos: starting offset
  *
- *	Similar to sysfs_read_file(), though working in the opposite direction.
- *	We allocate and fill the data from the user in fill_write_buffer(),
- *	then push it to the kobject in flush_write_buffer().
- *	There is no easy way for us to know if userspace is only doing a partial
- *	write, so we don't support them. We expect the entire buffer to come
- *	on the first write.
- *	Hint: if you're writing a value, first read the file, modify only the
- *	the value you're changing, then write entire buffer back.
+ * Copy data in from userland and pass it to the matching
+ * sysfs_ops->store() by invoking flush_write_buffer().
+ *
+ * There is no easy way for us to know if userspace is only doing a partial
+ * write, so we don't support them. We expect the entire buffer to come on
+ * the first write.  Hint: if you're writing a value, first read the file,
+ * modify only the the value you're changing, then write entire buffer
+ * back.
  */
-static ssize_t sysfs_write_file(struct file *file, const char __user *buf,
+static ssize_t sysfs_write_file(struct file *file, const char __user *user_buf,
 				size_t count, loff_t *ppos)
 {
-	struct sysfs_buffer *buffer = file->private_data;
-	ssize_t len;
+	struct sysfs_open_file *of = sysfs_of(file);
+	ssize_t len = min_t(size_t, count, PAGE_SIZE);
+	loff_t size = file_inode(file)->i_size;
+	char *buf;
 
-	mutex_lock(&buffer->mutex);
-	len = fill_write_buffer(buffer, buf, count);
-	if (len > 0)
-		len = flush_write_buffer(file->f_path.dentry, buffer, len);
+	if (sysfs_is_bin(of->sd) && size) {
+		if (size <= *ppos)
+			return 0;
+		len = min_t(ssize_t, len, size - *ppos);
+	}
+
+	if (!len)
+		return 0;
+
+	buf = kmalloc(len + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (copy_from_user(buf, user_buf, len)) {
+		len = -EFAULT;
+		goto out_free;
+	}
+	buf[len] = '\0';	/* guarantee string termination */
+
+	len = flush_write_buffer(of, buf, *ppos, len);
 	if (len > 0)
 		*ppos += len;
-	mutex_unlock(&buffer->mutex);
+out_free:
+	kfree(buf);
 	return len;
 }
 
+static void sysfs_bin_vma_open(struct vm_area_struct *vma)
+{
+	struct file *file = vma->vm_file;
+	struct sysfs_open_file *of = sysfs_of(file);
+
+	if (!of->vm_ops)
+		return;
+
+	if (!sysfs_get_active(of->sd))
+		return;
+
+	if (of->vm_ops->open)
+		of->vm_ops->open(vma);
+
+	sysfs_put_active(of->sd);
+}
+
+static int sysfs_bin_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct file *file = vma->vm_file;
+	struct sysfs_open_file *of = sysfs_of(file);
+	int ret;
+
+	if (!of->vm_ops)
+		return VM_FAULT_SIGBUS;
+
+	if (!sysfs_get_active(of->sd))
+		return VM_FAULT_SIGBUS;
+
+	ret = VM_FAULT_SIGBUS;
+	if (of->vm_ops->fault)
+		ret = of->vm_ops->fault(vma, vmf);
+
+	sysfs_put_active(of->sd);
+	return ret;
+}
+
+static int sysfs_bin_page_mkwrite(struct vm_area_struct *vma,
+				  struct vm_fault *vmf)
+{
+	struct file *file = vma->vm_file;
+	struct sysfs_open_file *of = sysfs_of(file);
+	int ret;
+
+	if (!of->vm_ops)
+		return VM_FAULT_SIGBUS;
+
+	if (!sysfs_get_active(of->sd))
+		return VM_FAULT_SIGBUS;
+
+	ret = 0;
+	if (of->vm_ops->page_mkwrite)
+		ret = of->vm_ops->page_mkwrite(vma, vmf);
+	else
+		file_update_time(file);
+
+	sysfs_put_active(of->sd);
+	return ret;
+}
+
+static int sysfs_bin_access(struct vm_area_struct *vma, unsigned long addr,
+			    void *buf, int len, int write)
+{
+	struct file *file = vma->vm_file;
+	struct sysfs_open_file *of = sysfs_of(file);
+	int ret;
+
+	if (!of->vm_ops)
+		return -EINVAL;
+
+	if (!sysfs_get_active(of->sd))
+		return -EINVAL;
+
+	ret = -EINVAL;
+	if (of->vm_ops->access)
+		ret = of->vm_ops->access(vma, addr, buf, len, write);
+
+	sysfs_put_active(of->sd);
+	return ret;
+}
+
+#ifdef CONFIG_NUMA
+static int sysfs_bin_set_policy(struct vm_area_struct *vma,
+				struct mempolicy *new)
+{
+	struct file *file = vma->vm_file;
+	struct sysfs_open_file *of = sysfs_of(file);
+	int ret;
+
+	if (!of->vm_ops)
+		return 0;
+
+	if (!sysfs_get_active(of->sd))
+		return -EINVAL;
+
+	ret = 0;
+	if (of->vm_ops->set_policy)
+		ret = of->vm_ops->set_policy(vma, new);
+
+	sysfs_put_active(of->sd);
+	return ret;
+}
+
+static struct mempolicy *sysfs_bin_get_policy(struct vm_area_struct *vma,
+					      unsigned long addr)
+{
+	struct file *file = vma->vm_file;
+	struct sysfs_open_file *of = sysfs_of(file);
+	struct mempolicy *pol;
+
+	if (!of->vm_ops)
+		return vma->vm_policy;
+
+	if (!sysfs_get_active(of->sd))
+		return vma->vm_policy;
+
+	pol = vma->vm_policy;
+	if (of->vm_ops->get_policy)
+		pol = of->vm_ops->get_policy(vma, addr);
+
+	sysfs_put_active(of->sd);
+	return pol;
+}
+
+static int sysfs_bin_migrate(struct vm_area_struct *vma, const nodemask_t *from,
+			     const nodemask_t *to, unsigned long flags)
+{
+	struct file *file = vma->vm_file;
+	struct sysfs_open_file *of = sysfs_of(file);
+	int ret;
+
+	if (!of->vm_ops)
+		return 0;
+
+	if (!sysfs_get_active(of->sd))
+		return 0;
+
+	ret = 0;
+	if (of->vm_ops->migrate)
+		ret = of->vm_ops->migrate(vma, from, to, flags);
+
+	sysfs_put_active(of->sd);
+	return ret;
+}
+#endif
+
+static const struct vm_operations_struct sysfs_bin_vm_ops = {
+	.open		= sysfs_bin_vma_open,
+	.fault		= sysfs_bin_fault,
+	.page_mkwrite	= sysfs_bin_page_mkwrite,
+	.access		= sysfs_bin_access,
+#ifdef CONFIG_NUMA
+	.set_policy	= sysfs_bin_set_policy,
+	.get_policy	= sysfs_bin_get_policy,
+	.migrate	= sysfs_bin_migrate,
+#endif
+};
+
+static int sysfs_bin_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct sysfs_open_file *of = sysfs_of(file);
+	struct bin_attribute *battr = of->sd->s_attr.bin_attr;
+	struct kobject *kobj = of->sd->s_parent->s_dir.kobj;
+	int rc;
+
+	mutex_lock(&of->mutex);
+
+	/* need of->sd for battr, its parent for kobj */
+	rc = -ENODEV;
+	if (!sysfs_get_active(of->sd))
+		goto out_unlock;
+
+	if (!battr->mmap)
+		goto out_put;
+
+	rc = battr->mmap(file, kobj, battr, vma);
+	if (rc)
+		goto out_put;
+
+	/*
+	 * PowerPC's pci_mmap of legacy_mem uses shmem_zero_setup()
+	 * to satisfy versions of X which crash if the mmap fails: that
+	 * substitutes a new vm_file, and we don't then want bin_vm_ops.
+	 */
+	if (vma->vm_file != file)
+		goto out_put;
+
+	rc = -EINVAL;
+	if (of->mmapped && of->vm_ops != vma->vm_ops)
+		goto out_put;
+
+	/*
+	 * It is not possible to successfully wrap close.
+	 * So error if someone is trying to use close.
+	 */
+	rc = -EINVAL;
+	if (vma->vm_ops && vma->vm_ops->close)
+		goto out_put;
+
+	rc = 0;
+	of->mmapped = 1;
+	of->vm_ops = vma->vm_ops;
+	vma->vm_ops = &sysfs_bin_vm_ops;
+out_put:
+	sysfs_put_active(of->sd);
+out_unlock:
+	mutex_unlock(&of->mutex);
+
+	return rc;
+}
+
 /**
  *	sysfs_get_open_dirent - get or create sysfs_open_dirent
  *	@sd: target sysfs_dirent
- *	@buffer: sysfs_buffer for this instance of open
+ *	@of: sysfs_open_file for this instance of open
  *
  *	If @sd->s_attr.open exists, increment its reference count;
- *	otherwise, create one.  @buffer is chained to the buffers
- *	list.
+ *	otherwise, create one.  @of is chained to the files list.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep).
@@ -253,11 +531,12 @@
  *	0 on success, -errno on failure.
  */
 static int sysfs_get_open_dirent(struct sysfs_dirent *sd,
-				 struct sysfs_buffer *buffer)
+				 struct sysfs_open_file *of)
 {
 	struct sysfs_open_dirent *od, *new_od = NULL;
 
  retry:
+	mutex_lock(&sysfs_open_file_mutex);
 	spin_lock_irq(&sysfs_open_dirent_lock);
 
 	if (!sd->s_attr.open && new_od) {
@@ -268,10 +547,11 @@
 	od = sd->s_attr.open;
 	if (od) {
 		atomic_inc(&od->refcnt);
-		list_add_tail(&buffer->list, &od->buffers);
+		list_add_tail(&of->list, &od->files);
 	}
 
 	spin_unlock_irq(&sysfs_open_dirent_lock);
+	mutex_unlock(&sysfs_open_file_mutex);
 
 	if (od) {
 		kfree(new_od);
@@ -286,36 +566,40 @@
 	atomic_set(&new_od->refcnt, 0);
 	atomic_set(&new_od->event, 1);
 	init_waitqueue_head(&new_od->poll);
-	INIT_LIST_HEAD(&new_od->buffers);
+	INIT_LIST_HEAD(&new_od->files);
 	goto retry;
 }
 
 /**
  *	sysfs_put_open_dirent - put sysfs_open_dirent
  *	@sd: target sysfs_dirent
- *	@buffer: associated sysfs_buffer
+ *	@of: associated sysfs_open_file
  *
- *	Put @sd->s_attr.open and unlink @buffer from the buffers list.
- *	If reference count reaches zero, disassociate and free it.
+ *	Put @sd->s_attr.open and unlink @of from the files list.  If
+ *	reference count reaches zero, disassociate and free it.
  *
  *	LOCKING:
  *	None.
  */
 static void sysfs_put_open_dirent(struct sysfs_dirent *sd,
-				  struct sysfs_buffer *buffer)
+				  struct sysfs_open_file *of)
 {
 	struct sysfs_open_dirent *od = sd->s_attr.open;
 	unsigned long flags;
 
+	mutex_lock(&sysfs_open_file_mutex);
 	spin_lock_irqsave(&sysfs_open_dirent_lock, flags);
 
-	list_del(&buffer->list);
+	if (of)
+		list_del(&of->list);
+
 	if (atomic_dec_and_test(&od->refcnt))
 		sd->s_attr.open = NULL;
 	else
 		od = NULL;
 
 	spin_unlock_irqrestore(&sysfs_open_dirent_lock, flags);
+	mutex_unlock(&sysfs_open_file_mutex);
 
 	kfree(od);
 }
@@ -324,67 +608,81 @@
 {
 	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	struct sysfs_buffer *buffer;
-	const struct sysfs_ops *ops;
+	struct sysfs_open_file *of;
+	bool has_read, has_write;
 	int error = -EACCES;
 
 	/* need attr_sd for attr and ops, its parent for kobj */
 	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
-	/* every kobject with an attribute needs a ktype assigned */
-	if (kobj->ktype && kobj->ktype->sysfs_ops)
-		ops = kobj->ktype->sysfs_ops;
-	else {
-		WARN(1, KERN_ERR
-		     "missing sysfs attribute operations for kobject: %s\n",
-		     kobject_name(kobj));
+	if (sysfs_is_bin(attr_sd)) {
+		struct bin_attribute *battr = attr_sd->s_attr.bin_attr;
+
+		has_read = battr->read || battr->mmap;
+		has_write = battr->write || battr->mmap;
+	} else {
+		const struct sysfs_ops *ops = sysfs_file_ops(attr_sd);
+
+		/* every kobject with an attribute needs a ktype assigned */
+		if (WARN(!ops, KERN_ERR
+			 "missing sysfs attribute operations for kobject: %s\n",
+			 kobject_name(kobj)))
+			goto err_out;
+
+		has_read = ops->show;
+		has_write = ops->store;
+	}
+
+	/* check perms and supported operations */
+	if ((file->f_mode & FMODE_WRITE) &&
+	    (!(inode->i_mode & S_IWUGO) || !has_write))
 		goto err_out;
-	}
 
-	/* File needs write support.
-	 * The inode's perms must say it's ok,
-	 * and we must have a store method.
-	 */
-	if (file->f_mode & FMODE_WRITE) {
-		if (!(inode->i_mode & S_IWUGO) || !ops->store)
-			goto err_out;
-	}
+	if ((file->f_mode & FMODE_READ) &&
+	    (!(inode->i_mode & S_IRUGO) || !has_read))
+		goto err_out;
 
-	/* File needs read support.
-	 * The inode's perms must say it's ok, and we there
-	 * must be a show method for it.
-	 */
-	if (file->f_mode & FMODE_READ) {
-		if (!(inode->i_mode & S_IRUGO) || !ops->show)
-			goto err_out;
-	}
-
-	/* No error? Great, allocate a buffer for the file, and store it
-	 * it in file->private_data for easy access.
-	 */
+	/* allocate a sysfs_open_file for the file */
 	error = -ENOMEM;
-	buffer = kzalloc(sizeof(struct sysfs_buffer), GFP_KERNEL);
-	if (!buffer)
+	of = kzalloc(sizeof(struct sysfs_open_file), GFP_KERNEL);
+	if (!of)
 		goto err_out;
 
-	mutex_init(&buffer->mutex);
-	buffer->needs_read_fill = 1;
-	buffer->ops = ops;
-	file->private_data = buffer;
+	mutex_init(&of->mutex);
+	of->sd = attr_sd;
+	of->file = file;
 
-	/* make sure we have open dirent struct */
-	error = sysfs_get_open_dirent(attr_sd, buffer);
+	/*
+	 * Always instantiate seq_file even if read access doesn't use
+	 * seq_file or is not requested.  This unifies private data access
+	 * and readable regular files are the vast majority anyway.
+	 */
+	if (sysfs_is_bin(attr_sd))
+		error = single_open(file, NULL, of);
+	else
+		error = single_open(file, sysfs_seq_show, of);
 	if (error)
 		goto err_free;
 
+	/* seq_file clears PWRITE unconditionally, restore it if WRITE */
+	if (file->f_mode & FMODE_WRITE)
+		file->f_mode |= FMODE_PWRITE;
+
+	/* make sure we have open dirent struct */
+	error = sysfs_get_open_dirent(attr_sd, of);
+	if (error)
+		goto err_close;
+
 	/* open succeeded, put active references */
 	sysfs_put_active(attr_sd);
 	return 0;
 
- err_free:
-	kfree(buffer);
- err_out:
+err_close:
+	single_release(inode, file);
+err_free:
+	kfree(of);
+err_out:
 	sysfs_put_active(attr_sd);
 	return error;
 }
@@ -392,17 +690,41 @@
 static int sysfs_release(struct inode *inode, struct file *filp)
 {
 	struct sysfs_dirent *sd = filp->f_path.dentry->d_fsdata;
-	struct sysfs_buffer *buffer = filp->private_data;
+	struct sysfs_open_file *of = sysfs_of(filp);
 
-	sysfs_put_open_dirent(sd, buffer);
-
-	if (buffer->page)
-		free_page((unsigned long)buffer->page);
-	kfree(buffer);
+	sysfs_put_open_dirent(sd, of);
+	single_release(inode, filp);
+	kfree(of);
 
 	return 0;
 }
 
+void sysfs_unmap_bin_file(struct sysfs_dirent *sd)
+{
+	struct sysfs_open_dirent *od;
+	struct sysfs_open_file *of;
+
+	if (!sysfs_is_bin(sd))
+		return;
+
+	spin_lock_irq(&sysfs_open_dirent_lock);
+	od = sd->s_attr.open;
+	if (od)
+		atomic_inc(&od->refcnt);
+	spin_unlock_irq(&sysfs_open_dirent_lock);
+	if (!od)
+		return;
+
+	mutex_lock(&sysfs_open_file_mutex);
+	list_for_each_entry(of, &od->files, list) {
+		struct inode *inode = file_inode(of->file);
+		unmap_mapping_range(inode->i_mapping, 0, 0, 1);
+	}
+	mutex_unlock(&sysfs_open_file_mutex);
+
+	sysfs_put_open_dirent(sd, NULL);
+}
+
 /* Sysfs attribute files are pollable.  The idea is that you read
  * the content and then you use 'poll' or 'select' to wait for
  * the content to change.  When the content changes (assuming the
@@ -418,7 +740,7 @@
  */
 static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
 {
-	struct sysfs_buffer *buffer = filp->private_data;
+	struct sysfs_open_file *of = sysfs_of(filp);
 	struct sysfs_dirent *attr_sd = filp->f_path.dentry->d_fsdata;
 	struct sysfs_open_dirent *od = attr_sd->s_attr.open;
 
@@ -430,13 +752,12 @@
 
 	sysfs_put_active(attr_sd);
 
-	if (buffer->event != atomic_read(&od->event))
+	if (of->event != atomic_read(&od->event))
 		goto trigger;
 
 	return DEFAULT_POLLMASK;
 
  trigger:
-	buffer->needs_read_fill = 1;
 	return DEFAULT_POLLMASK|POLLERR|POLLPRI;
 }
 
@@ -466,9 +787,9 @@
 	mutex_lock(&sysfs_mutex);
 
 	if (sd && dir)
-		sd = sysfs_find_dirent(sd, NULL, dir);
+		sd = sysfs_find_dirent(sd, dir, NULL);
 	if (sd && attr)
-		sd = sysfs_find_dirent(sd, NULL, attr);
+		sd = sysfs_find_dirent(sd, attr, NULL);
 	if (sd)
 		sysfs_notify_dirent(sd);
 
@@ -477,7 +798,7 @@
 EXPORT_SYMBOL_GPL(sysfs_notify);
 
 const struct file_operations sysfs_file_operations = {
-	.read		= sysfs_read_file,
+	.read		= seq_read,
 	.write		= sysfs_write_file,
 	.llseek		= generic_file_llseek,
 	.open		= sysfs_open_file,
@@ -485,58 +806,25 @@
 	.poll		= sysfs_poll,
 };
 
-static int sysfs_attr_ns(struct kobject *kobj, const struct attribute *attr,
-			 const void **pns)
-{
-	struct sysfs_dirent *dir_sd = kobj->sd;
-	const struct sysfs_ops *ops;
-	const void *ns = NULL;
-	int err;
+const struct file_operations sysfs_bin_operations = {
+	.read		= sysfs_bin_read,
+	.write		= sysfs_write_file,
+	.llseek		= generic_file_llseek,
+	.mmap		= sysfs_bin_mmap,
+	.open		= sysfs_open_file,
+	.release	= sysfs_release,
+	.poll		= sysfs_poll,
+};
 
-	if (!dir_sd) {
-		WARN(1, KERN_ERR "sysfs: kobject %s without dirent\n",
-			kobject_name(kobj));
-		return -ENOENT;
-	}
-
-	err = 0;
-	if (!sysfs_ns_type(dir_sd))
-		goto out;
-
-	err = -EINVAL;
-	if (!kobj->ktype)
-		goto out;
-	ops = kobj->ktype->sysfs_ops;
-	if (!ops)
-		goto out;
-	if (!ops->namespace)
-		goto out;
-
-	err = 0;
-	ns = ops->namespace(kobj, attr);
-out:
-	if (err) {
-		WARN(1, KERN_ERR
-		     "missing sysfs namespace attribute operation for kobject: %s\n",
-		     kobject_name(kobj));
-	}
-	*pns = ns;
-	return err;
-}
-
-int sysfs_add_file_mode(struct sysfs_dirent *dir_sd,
-			const struct attribute *attr, int type, umode_t amode)
+int sysfs_add_file_mode_ns(struct sysfs_dirent *dir_sd,
+			   const struct attribute *attr, int type,
+			   umode_t amode, const void *ns)
 {
 	umode_t mode = (amode & S_IALLUGO) | S_IFREG;
 	struct sysfs_addrm_cxt acxt;
 	struct sysfs_dirent *sd;
-	const void *ns;
 	int rc;
 
-	rc = sysfs_attr_ns(dir_sd->s_dir.kobj, attr, &ns);
-	if (rc)
-		return rc;
-
 	sd = sysfs_new_dirent(attr->name, mode, type);
 	if (!sd)
 		return -ENOMEM;
@@ -545,8 +833,8 @@
 	sd->s_attr.attr = (void *)attr;
 	sysfs_dirent_init_lockdep(sd);
 
-	sysfs_addrm_start(&acxt, dir_sd);
-	rc = sysfs_add_one(&acxt, sd);
+	sysfs_addrm_start(&acxt);
+	rc = sysfs_add_one(&acxt, sd, dir_sd);
 	sysfs_addrm_finish(&acxt);
 
 	if (rc)
@@ -559,23 +847,25 @@
 int sysfs_add_file(struct sysfs_dirent *dir_sd, const struct attribute *attr,
 		   int type)
 {
-	return sysfs_add_file_mode(dir_sd, attr, type, attr->mode);
+	return sysfs_add_file_mode_ns(dir_sd, attr, type, attr->mode, NULL);
 }
 
-
 /**
- *	sysfs_create_file - create an attribute file for an object.
- *	@kobj:	object we're creating for.
- *	@attr:	attribute descriptor.
+ * sysfs_create_file_ns - create an attribute file for an object with custom ns
+ * @kobj: object we're creating for
+ * @attr: attribute descriptor
+ * @ns: namespace the new file should belong to
  */
-int sysfs_create_file(struct kobject *kobj, const struct attribute *attr)
+int sysfs_create_file_ns(struct kobject *kobj, const struct attribute *attr,
+			 const void *ns)
 {
 	BUG_ON(!kobj || !kobj->sd || !attr);
 
-	return sysfs_add_file(kobj->sd, attr, SYSFS_KOBJ_ATTR);
+	return sysfs_add_file_mode_ns(kobj->sd, attr, SYSFS_KOBJ_ATTR,
+				      attr->mode, ns);
 
 }
-EXPORT_SYMBOL_GPL(sysfs_create_file);
+EXPORT_SYMBOL_GPL(sysfs_create_file_ns);
 
 int sysfs_create_files(struct kobject *kobj, const struct attribute **ptr)
 {
@@ -604,7 +894,7 @@
 	int error;
 
 	if (group)
-		dir_sd = sysfs_get_dirent(kobj->sd, NULL, group);
+		dir_sd = sysfs_get_dirent(kobj->sd, group);
 	else
 		dir_sd = sysfs_get(kobj->sd);
 
@@ -630,17 +920,12 @@
 {
 	struct sysfs_dirent *sd;
 	struct iattr newattrs;
-	const void *ns;
 	int rc;
 
-	rc = sysfs_attr_ns(kobj, attr, &ns);
-	if (rc)
-		return rc;
-
 	mutex_lock(&sysfs_mutex);
 
 	rc = -ENOENT;
-	sd = sysfs_find_dirent(kobj->sd, ns, attr->name);
+	sd = sysfs_find_dirent(kobj->sd, attr->name, NULL);
 	if (!sd)
 		goto out;
 
@@ -655,22 +940,21 @@
 EXPORT_SYMBOL_GPL(sysfs_chmod_file);
 
 /**
- *	sysfs_remove_file - remove an object attribute.
- *	@kobj:	object we're acting for.
- *	@attr:	attribute descriptor.
+ * sysfs_remove_file_ns - remove an object attribute with a custom ns tag
+ * @kobj: object we're acting for
+ * @attr: attribute descriptor
+ * @ns: namespace tag of the file to remove
  *
- *	Hash the attribute name and kill the victim.
+ * Hash the attribute name and namespace tag and kill the victim.
  */
-void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr)
+void sysfs_remove_file_ns(struct kobject *kobj, const struct attribute *attr,
+			  const void *ns)
 {
-	const void *ns;
+	struct sysfs_dirent *dir_sd = kobj->sd;
 
-	if (sysfs_attr_ns(kobj, attr, &ns))
-		return;
-
-	sysfs_hash_and_remove(kobj->sd, ns, attr->name);
+	sysfs_hash_and_remove(dir_sd, attr->name, ns);
 }
-EXPORT_SYMBOL_GPL(sysfs_remove_file);
+EXPORT_SYMBOL_GPL(sysfs_remove_file_ns);
 
 void sysfs_remove_files(struct kobject *kobj, const struct attribute **ptr)
 {
@@ -692,16 +976,42 @@
 	struct sysfs_dirent *dir_sd;
 
 	if (group)
-		dir_sd = sysfs_get_dirent(kobj->sd, NULL, group);
+		dir_sd = sysfs_get_dirent(kobj->sd, group);
 	else
 		dir_sd = sysfs_get(kobj->sd);
 	if (dir_sd) {
-		sysfs_hash_and_remove(dir_sd, NULL, attr->name);
+		sysfs_hash_and_remove(dir_sd, attr->name, NULL);
 		sysfs_put(dir_sd);
 	}
 }
 EXPORT_SYMBOL_GPL(sysfs_remove_file_from_group);
 
+/**
+ *	sysfs_create_bin_file - create binary file for object.
+ *	@kobj:	object.
+ *	@attr:	attribute descriptor.
+ */
+int sysfs_create_bin_file(struct kobject *kobj,
+			  const struct bin_attribute *attr)
+{
+	BUG_ON(!kobj || !kobj->sd || !attr);
+
+	return sysfs_add_file(kobj->sd, &attr->attr, SYSFS_KOBJ_BIN_ATTR);
+}
+EXPORT_SYMBOL_GPL(sysfs_create_bin_file);
+
+/**
+ *	sysfs_remove_bin_file - remove binary file for object.
+ *	@kobj:	object.
+ *	@attr:	attribute descriptor.
+ */
+void sysfs_remove_bin_file(struct kobject *kobj,
+			   const struct bin_attribute *attr)
+{
+	sysfs_hash_and_remove(kobj->sd, attr->attr.name, NULL);
+}
+EXPORT_SYMBOL_GPL(sysfs_remove_bin_file);
+
 struct sysfs_schedule_callback_struct {
 	struct list_head	workq_list;
 	struct kobject		*kobj;
diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c
index 5f92cd2..1898a10 100644
--- a/fs/sysfs/group.c
+++ b/fs/sysfs/group.c
@@ -26,7 +26,7 @@
 
 	if (grp->attrs)
 		for (attr = grp->attrs; *attr; attr++)
-			sysfs_hash_and_remove(dir_sd, NULL, (*attr)->name);
+			sysfs_hash_and_remove(dir_sd, (*attr)->name, NULL);
 	if (grp->bin_attrs)
 		for (bin_attr = grp->bin_attrs; *bin_attr; bin_attr++)
 			sysfs_remove_bin_file(kobj, *bin_attr);
@@ -49,16 +49,17 @@
 			 * re-adding (if required) the file.
 			 */
 			if (update)
-				sysfs_hash_and_remove(dir_sd, NULL,
-						      (*attr)->name);
+				sysfs_hash_and_remove(dir_sd, (*attr)->name,
+						      NULL);
 			if (grp->is_visible) {
 				mode = grp->is_visible(kobj, *attr, i);
 				if (!mode)
 					continue;
 			}
-			error = sysfs_add_file_mode(dir_sd, *attr,
-						    SYSFS_KOBJ_ATTR,
-						    (*attr)->mode | mode);
+			error = sysfs_add_file_mode_ns(dir_sd, *attr,
+						       SYSFS_KOBJ_ATTR,
+						       (*attr)->mode | mode,
+						       NULL);
 			if (unlikely(error))
 				break;
 		}
@@ -110,7 +111,7 @@
 	error = create_files(sd, kobj, grp, update);
 	if (error) {
 		if (grp->name)
-			sysfs_remove_subdir(sd);
+			sysfs_remove(sd);
 	}
 	sysfs_put(sd);
 	return error;
@@ -206,7 +207,7 @@
 	struct sysfs_dirent *sd;
 
 	if (grp->name) {
-		sd = sysfs_get_dirent(dir_sd, NULL, grp->name);
+		sd = sysfs_get_dirent(dir_sd, grp->name);
 		if (!sd) {
 			WARN(!sd, KERN_WARNING
 			     "sysfs group %p not found for kobject '%s'\n",
@@ -218,7 +219,7 @@
 
 	remove_files(sd, kobj, grp);
 	if (grp->name)
-		sysfs_remove_subdir(sd);
+		sysfs_remove(sd);
 
 	sysfs_put(sd);
 }
@@ -261,7 +262,7 @@
 	struct attribute *const *attr;
 	int i;
 
-	dir_sd = sysfs_get_dirent(kobj->sd, NULL, grp->name);
+	dir_sd = sysfs_get_dirent(kobj->sd, grp->name);
 	if (!dir_sd)
 		return -ENOENT;
 
@@ -269,7 +270,7 @@
 		error = sysfs_add_file(dir_sd, *attr, SYSFS_KOBJ_ATTR);
 	if (error) {
 		while (--i >= 0)
-			sysfs_hash_and_remove(dir_sd, NULL, (*--attr)->name);
+			sysfs_hash_and_remove(dir_sd, (*--attr)->name, NULL);
 	}
 	sysfs_put(dir_sd);
 
@@ -288,10 +289,10 @@
 	struct sysfs_dirent *dir_sd;
 	struct attribute *const *attr;
 
-	dir_sd = sysfs_get_dirent(kobj->sd, NULL, grp->name);
+	dir_sd = sysfs_get_dirent(kobj->sd, grp->name);
 	if (dir_sd) {
 		for (attr = grp->attrs; *attr; ++attr)
-			sysfs_hash_and_remove(dir_sd, NULL, (*attr)->name);
+			sysfs_hash_and_remove(dir_sd, (*attr)->name, NULL);
 		sysfs_put(dir_sd);
 	}
 }
@@ -310,7 +311,7 @@
 	struct sysfs_dirent *dir_sd;
 	int error = 0;
 
-	dir_sd = sysfs_get_dirent(kobj->sd, NULL, group_name);
+	dir_sd = sysfs_get_dirent(kobj->sd, group_name);
 	if (!dir_sd)
 		return -ENOENT;
 
@@ -332,9 +333,9 @@
 {
 	struct sysfs_dirent *dir_sd;
 
-	dir_sd = sysfs_get_dirent(kobj->sd, NULL, group_name);
+	dir_sd = sysfs_get_dirent(kobj->sd, group_name);
 	if (dir_sd) {
-		sysfs_hash_and_remove(dir_sd, NULL, link_name);
+		sysfs_hash_and_remove(dir_sd, link_name, NULL);
 		sysfs_put(dir_sd);
 	}
 }
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 963f910..1750f79 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -258,9 +258,9 @@
 		inode->i_fop = &sysfs_file_operations;
 		break;
 	case SYSFS_KOBJ_BIN_ATTR:
-		bin_attr = sd->s_bin_attr.bin_attr;
+		bin_attr = sd->s_attr.bin_attr;
 		inode->i_size = bin_attr->size;
-		inode->i_fop = &bin_fops;
+		inode->i_fop = &sysfs_bin_operations;
 		break;
 	case SYSFS_KOBJ_LINK:
 		inode->i_op = &sysfs_symlink_inode_operations;
@@ -314,32 +314,6 @@
 	sysfs_put(sd);
 }
 
-int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const void *ns,
-			  const char *name)
-{
-	struct sysfs_addrm_cxt acxt;
-	struct sysfs_dirent *sd;
-
-	if (!dir_sd) {
-		WARN(1, KERN_WARNING "sysfs: can not remove '%s', no directory\n",
-			name);
-		return -ENOENT;
-	}
-
-	sysfs_addrm_start(&acxt, dir_sd);
-
-	sd = sysfs_find_dirent(dir_sd, ns, name);
-	if (sd)
-		sysfs_remove_one(&acxt, sd);
-
-	sysfs_addrm_finish(&acxt);
-
-	if (sd)
-		return 0;
-	else
-		return -ENOENT;
-}
-
 int sysfs_permission(struct inode *inode, int mask)
 {
 	struct sysfs_dirent *sd;
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index 2dd4507..3ae3f1b 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -33,13 +33,15 @@
 
 	BUG_ON(!name || !parent_sd);
 
-	/* target->sd can go away beneath us but is protected with
-	 * sysfs_assoc_lock.  Fetch target_sd from it.
+	/*
+	 * We don't own @target and it may be removed at any time.
+	 * Synchronize using sysfs_symlink_target_lock.  See
+	 * sysfs_remove_dir() for details.
 	 */
-	spin_lock(&sysfs_assoc_lock);
+	spin_lock(&sysfs_symlink_target_lock);
 	if (target->sd)
 		target_sd = sysfs_get(target->sd);
-	spin_unlock(&sysfs_assoc_lock);
+	spin_unlock(&sysfs_symlink_target_lock);
 
 	error = -ENOENT;
 	if (!target_sd)
@@ -52,18 +54,18 @@
 
 	ns_type = sysfs_ns_type(parent_sd);
 	if (ns_type)
-		sd->s_ns = target->ktype->namespace(target);
+		sd->s_ns = target_sd->s_ns;
 	sd->s_symlink.target_sd = target_sd;
 	target_sd = NULL;	/* reference is now owned by the symlink */
 
-	sysfs_addrm_start(&acxt, parent_sd);
+	sysfs_addrm_start(&acxt);
 	/* Symlinks must be between directories with the same ns_type */
 	if (!ns_type ||
 	    (ns_type == sysfs_ns_type(sd->s_symlink.target_sd->s_parent))) {
 		if (warn)
-			error = sysfs_add_one(&acxt, sd);
+			error = sysfs_add_one(&acxt, sd, parent_sd);
 		else
-			error = __sysfs_add_one(&acxt, sd);
+			error = __sysfs_add_one(&acxt, sd, parent_sd);
 	} else {
 		error = -EINVAL;
 		WARN(1, KERN_WARNING
@@ -155,11 +157,17 @@
 			const char *name)
 {
 	const void *ns = NULL;
-	spin_lock(&sysfs_assoc_lock);
+
+	/*
+	 * We don't own @target and it may be removed at any time.
+	 * Synchronize using sysfs_symlink_target_lock.  See
+	 * sysfs_remove_dir() for details.
+	 */
+	spin_lock(&sysfs_symlink_target_lock);
 	if (targ->sd && sysfs_ns_type(kobj->sd))
 		ns = targ->sd->s_ns;
-	spin_unlock(&sysfs_assoc_lock);
-	sysfs_hash_and_remove(kobj->sd, ns, name);
+	spin_unlock(&sysfs_symlink_target_lock);
+	sysfs_hash_and_remove(kobj->sd, name, ns);
 }
 
 /**
@@ -176,24 +184,25 @@
 	else
 		parent_sd = kobj->sd;
 
-	sysfs_hash_and_remove(parent_sd, NULL, name);
+	sysfs_hash_and_remove(parent_sd, name, NULL);
 }
 EXPORT_SYMBOL_GPL(sysfs_remove_link);
 
 /**
- *	sysfs_rename_link - rename symlink in object's directory.
+ *	sysfs_rename_link_ns - rename symlink in object's directory.
  *	@kobj:	object we're acting for.
  *	@targ:	object we're pointing to.
  *	@old:	previous name of the symlink.
  *	@new:	new name of the symlink.
+ *	@new_ns: new namespace of the symlink.
  *
  *	A helper function for the common rename symlink idiom.
  */
-int sysfs_rename_link(struct kobject *kobj, struct kobject *targ,
-			const char *old, const char *new)
+int sysfs_rename_link_ns(struct kobject *kobj, struct kobject *targ,
+			 const char *old, const char *new, const void *new_ns)
 {
 	struct sysfs_dirent *parent_sd, *sd = NULL;
-	const void *old_ns = NULL, *new_ns = NULL;
+	const void *old_ns = NULL;
 	int result;
 
 	if (!kobj)
@@ -205,7 +214,7 @@
 		old_ns = targ->sd->s_ns;
 
 	result = -ENOENT;
-	sd = sysfs_get_dirent(parent_sd, old_ns, old);
+	sd = sysfs_get_dirent_ns(parent_sd, old, old_ns);
 	if (!sd)
 		goto out;
 
@@ -215,16 +224,13 @@
 	if (sd->s_symlink.target_sd->s_dir.kobj != targ)
 		goto out;
 
-	if (sysfs_ns_type(parent_sd))
-		new_ns = targ->ktype->namespace(targ);
-
-	result = sysfs_rename(sd, parent_sd, new_ns, new);
+	result = sysfs_rename(sd, parent_sd, new, new_ns);
 
 out:
 	sysfs_put(sd);
 	return result;
 }
-EXPORT_SYMBOL_GPL(sysfs_rename_link);
+EXPORT_SYMBOL_GPL(sysfs_rename_link_ns);
 
 static int sysfs_get_target_path(struct sysfs_dirent *parent_sd,
 				 struct sysfs_dirent *target_sd, char *path)
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index b6deca3..0af09fb 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -29,15 +29,13 @@
 };
 
 struct sysfs_elem_attr {
-	struct attribute	*attr;
+	union {
+		struct attribute	*attr;
+		struct bin_attribute	*bin_attr;
+	};
 	struct sysfs_open_dirent *open;
 };
 
-struct sysfs_elem_bin_attr {
-	struct bin_attribute	*bin_attr;
-	struct hlist_head	buffers;
-};
-
 struct sysfs_inode_attrs {
 	struct iattr	ia_iattr;
 	void		*ia_secdata;
@@ -74,7 +72,6 @@
 		struct sysfs_elem_dir		s_dir;
 		struct sysfs_elem_symlink	s_symlink;
 		struct sysfs_elem_attr		s_attr;
-		struct sysfs_elem_bin_attr	s_bin_attr;
 	};
 
 	unsigned short		s_flags;
@@ -115,6 +112,7 @@
 }
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
+
 #define sysfs_dirent_init_lockdep(sd)				\
 do {								\
 	struct attribute *attr = sd->s_attr.attr;		\
@@ -124,15 +122,31 @@
 								\
 	lockdep_init_map(&sd->dep_map, "s_active", key, 0);	\
 } while (0)
+
+/* Test for attributes that want to ignore lockdep for read-locking */
+static inline bool sysfs_ignore_lockdep(struct sysfs_dirent *sd)
+{
+	int type = sysfs_type(sd);
+
+	return (type == SYSFS_KOBJ_ATTR || type == SYSFS_KOBJ_BIN_ATTR) &&
+		sd->s_attr.attr->ignore_lockdep;
+}
+
 #else
+
 #define sysfs_dirent_init_lockdep(sd) do {} while (0)
+
+static inline bool sysfs_ignore_lockdep(struct sysfs_dirent *sd)
+{
+	return true;
+}
+
 #endif
 
 /*
  * Context structure to be used while adding/removing nodes.
  */
 struct sysfs_addrm_cxt {
-	struct sysfs_dirent	*parent_sd;
 	struct sysfs_dirent	*removed;
 };
 
@@ -156,38 +170,37 @@
  * dir.c
  */
 extern struct mutex sysfs_mutex;
-extern spinlock_t sysfs_assoc_lock;
+extern spinlock_t sysfs_symlink_target_lock;
 extern const struct dentry_operations sysfs_dentry_ops;
 
 extern const struct file_operations sysfs_dir_operations;
 extern const struct inode_operations sysfs_dir_inode_operations;
 
-struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd);
 struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd);
 void sysfs_put_active(struct sysfs_dirent *sd);
-void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
-		       struct sysfs_dirent *parent_sd);
-int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
-int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
-void sysfs_remove_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
+void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt);
+void sysfs_warn_dup(struct sysfs_dirent *parent, const char *name);
+int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd,
+		    struct sysfs_dirent *parent_sd);
+int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd,
+		  struct sysfs_dirent *parent_sd);
+void sysfs_remove(struct sysfs_dirent *sd);
+int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name,
+			  const void *ns);
 void sysfs_addrm_finish(struct sysfs_addrm_cxt *acxt);
 
 struct sysfs_dirent *sysfs_find_dirent(struct sysfs_dirent *parent_sd,
-				       const void *ns,
-				       const unsigned char *name);
-struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
-				      const void *ns,
-				      const unsigned char *name);
+				       const unsigned char *name,
+				       const void *ns);
 struct sysfs_dirent *sysfs_new_dirent(const char *name, umode_t mode, int type);
 
 void release_sysfs_dirent(struct sysfs_dirent *sd);
 
 int sysfs_create_subdir(struct kobject *kobj, const char *name,
 			struct sysfs_dirent **p_sd);
-void sysfs_remove_subdir(struct sysfs_dirent *sd);
 
 int sysfs_rename(struct sysfs_dirent *sd, struct sysfs_dirent *new_parent_sd,
-		 const void *ns, const char *new_name);
+		 const char *new_name, const void *new_ns);
 
 static inline struct sysfs_dirent *__sysfs_get(struct sysfs_dirent *sd)
 {
@@ -218,25 +231,21 @@
 		  struct kstat *stat);
 int sysfs_setxattr(struct dentry *dentry, const char *name, const void *value,
 		   size_t size, int flags);
-int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const void *ns,
-			  const char *name);
 int sysfs_inode_init(void);
 
 /*
  * file.c
  */
 extern const struct file_operations sysfs_file_operations;
+extern const struct file_operations sysfs_bin_operations;
 
 int sysfs_add_file(struct sysfs_dirent *dir_sd,
 		   const struct attribute *attr, int type);
 
-int sysfs_add_file_mode(struct sysfs_dirent *dir_sd,
-			const struct attribute *attr, int type, umode_t amode);
-/*
- * bin.c
- */
-extern const struct file_operations bin_fops;
-void unmap_bin_file(struct sysfs_dirent *attr_sd);
+int sysfs_add_file_mode_ns(struct sysfs_dirent *dir_sd,
+			   const struct attribute *attr, int type,
+			   umode_t amode, const void *ns);
+void sysfs_unmap_bin_file(struct sysfs_dirent *sd);
 
 /*
  * symlink.c
diff --git a/include/dt-bindings/mfd/dbx500-prcmu.h b/include/dt-bindings/mfd/dbx500-prcmu.h
new file mode 100644
index 0000000..552a2d1
--- /dev/null
+++ b/include/dt-bindings/mfd/dbx500-prcmu.h
@@ -0,0 +1,83 @@
+/*
+ * This header provides constants for the PRCMU bindings.
+ *
+ */
+
+#ifndef _DT_BINDINGS_MFD_PRCMU_H
+#define _DT_BINDINGS_MFD_PRCMU_H
+
+/*
+ * Clock identifiers.
+ */
+#define ARMCLK			0
+#define PRCMU_ACLK		1
+#define PRCMU_SVAMMCSPCLK 	2
+#define PRCMU_SDMMCHCLK 	2  /* DBx540 only. */
+#define PRCMU_SIACLK 		3
+#define PRCMU_SIAMMDSPCLK 	3  /* DBx540 only. */
+#define PRCMU_SGACLK 		4
+#define PRCMU_UARTCLK 		5
+#define PRCMU_MSP02CLK 		6
+#define PRCMU_MSP1CLK 		7
+#define PRCMU_I2CCLK 		8
+#define PRCMU_SDMMCCLK 		9
+#define PRCMU_SLIMCLK 		10
+#define PRCMU_CAMCLK 		10 /* DBx540 only. */
+#define PRCMU_PER1CLK 		11
+#define PRCMU_PER2CLK 		12
+#define PRCMU_PER3CLK 		13
+#define PRCMU_PER5CLK 		14
+#define PRCMU_PER6CLK 		15
+#define PRCMU_PER7CLK 		16
+#define PRCMU_LCDCLK 		17
+#define PRCMU_BMLCLK 		18
+#define PRCMU_HSITXCLK 		19
+#define PRCMU_HSIRXCLK 		20
+#define PRCMU_HDMICLK		21
+#define PRCMU_APEATCLK 		22
+#define PRCMU_APETRACECLK 	23
+#define PRCMU_MCDECLK  	 	24
+#define PRCMU_IPI2CCLK  	25
+#define PRCMU_DSIALTCLK  	26
+#define PRCMU_DMACLK  	 	27
+#define PRCMU_B2R2CLK  	 	28
+#define PRCMU_TVCLK  	 	29
+#define SPARE_UNIPROCLK  	30
+#define PRCMU_SSPCLK  	 	31
+#define PRCMU_RNGCLK  	 	32
+#define PRCMU_UICCCLK  	 	33
+#define PRCMU_G1CLK             34 /* DBx540 only. */
+#define PRCMU_HVACLK            35 /* DBx540 only. */
+#define PRCMU_SPARE1CLK	 	36
+#define PRCMU_SPARE2CLK	 	37
+
+#define PRCMU_NUM_REG_CLOCKS  	38
+
+#define PRCMU_RTCCLK  	 	PRCMU_NUM_REG_CLOCKS
+#define PRCMU_SYSCLK  	 	39
+#define PRCMU_CDCLK  	 	40
+#define PRCMU_TIMCLK  	 	41
+#define PRCMU_PLLSOC0  	 	42
+#define PRCMU_PLLSOC1  	 	43
+#define PRCMU_ARMSS  	 	44
+#define PRCMU_PLLDDR  	 	45
+
+/* DSI Clocks */
+#define PRCMU_PLLDSI  	 	46
+#define PRCMU_DSI0CLK 	  	47
+#define PRCMU_DSI1CLK  	 	48
+#define PRCMU_DSI0ESCCLK  	49
+#define PRCMU_DSI1ESCCLK  	50
+#define PRCMU_DSI2ESCCLK  	51
+
+/* LCD DSI PLL - Ux540 only */
+#define PRCMU_PLLDSI_LCD        52
+#define PRCMU_DSI0CLK_LCD       53
+#define PRCMU_DSI1CLK_LCD       54
+#define PRCMU_DSI0ESCCLK_LCD    55
+#define PRCMU_DSI1ESCCLK_LCD    56
+#define PRCMU_DSI2ESCCLK_LCD    57
+
+#define PRCMU_NUM_CLKS  	58
+
+#endif
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
new file mode 100644
index 0000000..eb6c366a
--- /dev/null
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -0,0 +1,31 @@
+/*
+ * This header provides constants specific to AM43XX pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_AM43XX_H
+#define _DT_BINDINGS_PINCTRL_AM43XX_H
+
+#define MUX_MODE0	0
+#define MUX_MODE1	1
+#define MUX_MODE2	2
+#define MUX_MODE3	3
+#define MUX_MODE4	4
+#define MUX_MODE5	5
+#define MUX_MODE6	6
+#define MUX_MODE7	7
+
+#define PULL_DISABLE		(1 << 16)
+#define PULL_UP			(1 << 17)
+#define INPUT_EN		(1 << 18)
+#define SLEWCTRL_FAST		(1 << 19)
+#define DS0_PULL_UP_DOWN_EN	(1 << 27)
+
+#define PIN_OUTPUT		(PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	0
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN)
+
+#endif
+
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
new file mode 100644
index 0000000..002a285
--- /dev/null
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -0,0 +1,50 @@
+/*
+ * This header provides constants for DRA pinctrl bindings.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_DRA_H
+#define _DT_BINDINGS_PINCTRL_DRA_H
+
+/* DRA7 mux mode options for each pin. See TRM for options */
+#define MUX_MODE0	0x0
+#define MUX_MODE1	0x1
+#define MUX_MODE2	0x2
+#define MUX_MODE3	0x3
+#define MUX_MODE4	0x4
+#define MUX_MODE5	0x5
+#define MUX_MODE6	0x6
+#define MUX_MODE7	0x7
+#define MUX_MODE8	0x8
+#define MUX_MODE9	0x9
+#define MUX_MODE10	0xa
+#define MUX_MODE11	0xb
+#define MUX_MODE12	0xc
+#define MUX_MODE13	0xd
+#define MUX_MODE14	0xe
+#define MUX_MODE15	0xf
+
+#define PULL_ENA		(1 << 16)
+#define PULL_UP			(1 << 17)
+#define INPUT_EN		(1 << 18)
+#define SLEWCONTROL		(1 << 19)
+#define WAKEUP_EN		(1 << 24)
+#define WAKEUP_EVENT		(1 << 25)
+
+/* Active pin states */
+#define PIN_OUTPUT		0
+#define PIN_OUTPUT_PULLUP	(PIN_OUTPUT | PULL_ENA | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(PIN_OUTPUT | PULL_ENA)
+#define PIN_INPUT		INPUT_EN
+#define PIN_INPUT_SLEW		(INPUT_EN | SLEWCONTROL)
+#define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
+
+#endif
+
diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
index be201ca..00beddf 100644
--- a/include/linux/atmel_serial.h
+++ b/include/linux/atmel_serial.h
@@ -125,5 +125,6 @@
 #define ATMEL_US_IF		0x4c			/* IrDA Filter Register */
 
 #define ATMEL_US_NAME		0xf0			/* Ip Name */
+#define ATMEL_US_VERSION	0xfc			/* Ip Version */
 
 #endif
diff --git a/include/linux/clk/mxs.h b/include/linux/clk/mxs.h
index 90c30dc..5138a90 100644
--- a/include/linux/clk/mxs.h
+++ b/include/linux/clk/mxs.h
@@ -9,8 +9,6 @@
 #ifndef __LINUX_CLK_MXS_H
 #define __LINUX_CLK_MXS_H
 
-int mx23_clocks_init(void);
-int mx28_clocks_init(void);
 int mxs_saif_clkmux_select(unsigned int clkmux);
 
 #endif
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
deleted file mode 100644
index e074fdd..0000000
--- a/include/linux/clk/sunxi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_CLK_SUNXI_H_
-#define __LINUX_CLK_SUNXI_H_
-
-void __init sunxi_init_clocks(void);
-
-#endif
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 263489d..4d0b4d1 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -206,6 +206,12 @@
 	return ERR_PTR(-ENODEV);
 }
 
+static inline struct dentry *debugfs_create_atomic_t(const char *name, umode_t mode,
+				     struct dentry *parent, atomic_t *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
 static inline struct dentry *debugfs_create_bool(const char *name, umode_t mode,
 						 struct dentry *parent,
 						 u32 *value)
@@ -227,6 +233,12 @@
 	return ERR_PTR(-ENODEV);
 }
 
+static inline int debugfs_print_regs32(struct seq_file *s, const struct debugfs_reg32 *regs,
+			 int nregs, void __iomem *base, char *prefix)
+{
+	return 0;
+}
+
 static inline bool debugfs_initialized(void)
 {
 	return false;
diff --git a/include/linux/device.h b/include/linux/device.h
index 2a9d6ed..b025925 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -26,6 +26,7 @@
 #include <linux/atomic.h>
 #include <linux/ratelimit.h>
 #include <linux/uidgid.h>
+#include <linux/gfp.h>
 #include <asm/device.h>
 
 struct device;
@@ -63,9 +64,7 @@
  * @name:	The name of the bus.
  * @dev_name:	Used for subsystems to enumerate devices like ("foo%u", dev->id).
  * @dev_root:	Default device to use as the parent.
- * @bus_attrs:	Default attributes of the bus.
  * @dev_attrs:	Default attributes of the devices on the bus.
- * @drv_attrs:	Default attributes of the device drivers on the bus.
  * @bus_groups:	Default attributes of the bus.
  * @dev_groups:	Default attributes of the devices on the bus.
  * @drv_groups: Default attributes of the device drivers on the bus.
@@ -106,9 +105,7 @@
 	const char		*name;
 	const char		*dev_name;
 	struct device		*dev_root;
-	struct bus_attribute	*bus_attrs;	/* use bus_groups instead */
 	struct device_attribute	*dev_attrs;	/* use dev_groups instead */
-	struct driver_attribute	*drv_attrs;	/* use drv_groups instead */
 	const struct attribute_group **bus_groups;
 	const struct attribute_group **dev_groups;
 	const struct attribute_group **drv_groups;
@@ -329,8 +326,6 @@
  * @owner:	The module owner.
  * @class_attrs: Default attributes of this class.
  * @dev_groups:	Default attributes of the devices that belong to the class.
- * @dev_attrs:	Default attributes of the devices belong to the class.
- * @dev_bin_attrs: Default binary attributes of the devices belong to the class.
  * @dev_kobj:	The kobject that represents this class and links it into the hierarchy.
  * @dev_uevent:	Called when a device is added, removed from this class, or a
  *		few other things that generate uevents to add the environment
@@ -358,9 +353,7 @@
 	struct module		*owner;
 
 	struct class_attribute		*class_attrs;
-	struct device_attribute		*dev_attrs;	/* use dev_groups instead */
 	const struct attribute_group	**dev_groups;
-	struct bin_attribute		*dev_bin_attrs;
 	struct kobject			*dev_kobj;
 
 	int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
@@ -427,8 +420,6 @@
 			char *buf);
 	ssize_t (*store)(struct class *class, struct class_attribute *attr,
 			const char *buf, size_t count);
-	const void *(*namespace)(struct class *class,
-				 const struct class_attribute *attr);
 };
 
 #define CLASS_ATTR(_name, _mode, _show, _store) \
@@ -438,10 +429,24 @@
 #define CLASS_ATTR_RO(_name) \
 	struct class_attribute class_attr_##_name = __ATTR_RO(_name)
 
-extern int __must_check class_create_file(struct class *class,
-					  const struct class_attribute *attr);
-extern void class_remove_file(struct class *class,
-			      const struct class_attribute *attr);
+extern int __must_check class_create_file_ns(struct class *class,
+					     const struct class_attribute *attr,
+					     const void *ns);
+extern void class_remove_file_ns(struct class *class,
+				 const struct class_attribute *attr,
+				 const void *ns);
+
+static inline int __must_check class_create_file(struct class *class,
+					const struct class_attribute *attr)
+{
+	return class_create_file_ns(class, attr, NULL);
+}
+
+static inline void class_remove_file(struct class *class,
+				     const struct class_attribute *attr)
+{
+	return class_remove_file_ns(class, attr, NULL);
+}
 
 /* Simple class attribute that is just a static string */
 struct class_attribute_string {
@@ -602,8 +607,24 @@
 extern void devres_remove_group(struct device *dev, void *id);
 extern int devres_release_group(struct device *dev, void *id);
 
-/* managed kzalloc/kfree for device drivers, no kmalloc, always use kzalloc */
-extern void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp);
+/* managed devm_k.alloc/kfree for device drivers */
+extern void *devm_kmalloc(struct device *dev, size_t size, gfp_t gfp);
+static inline void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
+{
+	return devm_kmalloc(dev, size, gfp | __GFP_ZERO);
+}
+static inline void *devm_kmalloc_array(struct device *dev,
+				       size_t n, size_t size, gfp_t flags)
+{
+	if (size != 0 && n > SIZE_MAX / size)
+		return NULL;
+	return devm_kmalloc(dev, n * size, flags);
+}
+static inline void *devm_kcalloc(struct device *dev,
+				 size_t n, size_t size, gfp_t flags)
+{
+	return devm_kmalloc_array(dev, n, size, flags | __GFP_ZERO);
+}
 extern void devm_kfree(struct device *dev, void *p);
 
 void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res);
@@ -1149,16 +1170,15 @@
 #endif
 
 /*
- * dev_WARN*() acts like dev_printk(), but with the key difference
- * of using a WARN/WARN_ON to get the message out, including the
- * file/line information and a backtrace.
+ * dev_WARN*() acts like dev_printk(), but with the key difference of
+ * using WARN/WARN_ONCE to include file/line information and a backtrace.
  */
 #define dev_WARN(dev, format, arg...) \
-	WARN(1, "Device: %s\n" format, dev_driver_string(dev), ## arg);
+	WARN(1, "%s %s: " format, dev_driver_string(dev), dev_name(dev), ## arg);
 
 #define dev_WARN_ONCE(dev, condition, format, arg...) \
-	WARN_ONCE(condition, "Device %s\n" format, \
-			dev_driver_string(dev), ## arg)
+	WARN_ONCE(condition, "%s %s: " format, \
+			dev_driver_string(dev), dev_name(dev), ## arg)
 
 /* Create alias, so I can be autoloaded. */
 #define MODULE_ALIAS_CHARDEV(major,minor) \
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index fcb51c8..21c59af 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -51,10 +51,10 @@
 enum extcon_cable_name {
 	EXTCON_USB = 0,
 	EXTCON_USB_HOST,
-	EXTCON_TA, /* Travel Adaptor */
+	EXTCON_TA,			/* Travel Adaptor */
 	EXTCON_FAST_CHARGER,
 	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
+	EXTCON_CHARGE_DOWNSTREAM,	/* Charging an external device */
 	EXTCON_HDMI,
 	EXTCON_MHL,
 	EXTCON_DVI,
@@ -76,8 +76,8 @@
 
 /**
  * struct extcon_dev - An extcon device represents one external connector.
- * @name:	The name of this extcon device. Parent device name is used
- *		if NULL.
+ * @name:		The name of this extcon device. Parent device name is
+ *			used if NULL.
  * @supported_cable:	Array of supported cable names ending with NULL.
  *			If supported_cable is NULL, cable name related APIs
  *			are disabled.
@@ -89,21 +89,21 @@
  *			be attached simulataneously. {0x7, 0} is equivalent to
  *			{0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
  *			can be no simultaneous connections.
- * @print_name:	An optional callback to override the method to print the
- *		name of the extcon device.
+ * @print_name:		An optional callback to override the method to print the
+ *			name of the extcon device.
  * @print_state:	An optional callback to override the method to print the
- *		status of the extcon device.
- * @dev:	Device of this extcon. Do not provide at register-time.
- * @state:	Attach/detach state of this extcon. Do not provide at
- *		register-time
- * @nh:	Notifier for the state change events from this extcon
- * @entry:	To support list of extcon devices so that users can search
- *		for extcon devices based on the extcon name.
+ *			status of the extcon device.
+ * @dev:		Device of this extcon.
+ * @state:		Attach/detach state of this extcon. Do not provide at
+ *			register-time.
+ * @nh:			Notifier for the state change events from this extcon
+ * @entry:		To support list of extcon devices so that users can search
+ *			for extcon devices based on the extcon name.
  * @lock:
  * @max_supported:	Internal value to store the number of cables.
  * @extcon_dev_type:	Device_type struct to provide attribute_groups
  *			customized for each extcon device.
- * @cables:	Sysfs subdirectories. Each represents one cable.
+ * @cables:		Sysfs subdirectories. Each represents one cable.
  *
  * In most cases, users only need to provide "User initializing data" of
  * this struct when registering an extcon. In some exceptional cases,
@@ -111,26 +111,27 @@
  * are overwritten by register function.
  */
 struct extcon_dev {
-	/* --- Optional user initializing data --- */
-	const char	*name;
+	/* Optional user initializing data */
+	const char *name;
 	const char **supported_cable;
-	const u32	*mutually_exclusive;
+	const u32 *mutually_exclusive;
 
-	/* --- Optional callbacks to override class functions --- */
+	/* Optional callbacks to override class functions */
 	ssize_t	(*print_name)(struct extcon_dev *edev, char *buf);
 	ssize_t	(*print_state)(struct extcon_dev *edev, char *buf);
 
-	/* --- Internal data. Please do not set. --- */
-	struct device	*dev;
-	u32		state;
+	/* Internal data. Please do not set. */
+	struct device dev;
 	struct raw_notifier_head nh;
 	struct list_head entry;
-	spinlock_t lock; /* could be called by irq handler */
 	int max_supported;
+	spinlock_t lock;	/* could be called by irq handler */
+	u32 state;
 
 	/* /sys/class/extcon/.../cable.n/... */
 	struct device_type extcon_dev_type;
 	struct extcon_cable *cables;
+
 	/* /sys/class/extcon/.../mutually_exclusive/... */
 	struct attribute_group attr_g_muex;
 	struct attribute **attrs_muex;
@@ -138,13 +139,13 @@
 };
 
 /**
- * struct extcon_cable	- An internal data for each cable of extcon device.
- * @edev:	The extcon device
+ * struct extcon_cable - An internal data for each cable of extcon device.
+ * @edev:		The extcon device
  * @cable_index:	Index of this cable in the edev
- * @attr_g:	Attribute group for the cable
- * @attr_name:	"name" sysfs entry
- * @attr_state:	"state" sysfs entry
- * @attrs:	Array pointing to attr_name and attr_state for attr_g
+ * @attr_g:		Attribute group for the cable
+ * @attr_name:		"name" sysfs entry
+ * @attr_state:		"state" sysfs entry
+ * @attrs:		Array pointing to attr_name and attr_state for attr_g
  */
 struct extcon_cable {
 	struct extcon_dev *edev;
@@ -159,11 +160,13 @@
 
 /**
  * struct extcon_specific_cable_nb - An internal data for
- *				extcon_register_interest().
- * @internal_nb:	a notifier block bridging extcon notifier and cable notifier.
- * @user_nb:	user provided notifier block for events from a specific cable.
+ *				     extcon_register_interest().
+ * @internal_nb:	A notifier block bridging extcon notifier
+ *			and cable notifier.
+ * @user_nb:		user provided notifier block for events from
+ *			a specific cable.
  * @cable_index:	the target cable.
- * @edev:	the target extcon device.
+ * @edev:		the target extcon device.
  * @previous_value:	the saved previous event value.
  */
 struct extcon_specific_cable_nb {
@@ -180,7 +183,7 @@
  * Following APIs are for notifiers or configurations.
  * Notifiers are the external port and connection devices.
  */
-extern int extcon_dev_register(struct extcon_dev *edev, struct device *dev);
+extern int extcon_dev_register(struct extcon_dev *edev);
 extern void extcon_dev_unregister(struct extcon_dev *edev);
 extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
 
@@ -238,8 +241,7 @@
 extern int extcon_unregister_notifier(struct extcon_dev *edev,
 				      struct notifier_block *nb);
 #else /* CONFIG_EXTCON */
-static inline int extcon_dev_register(struct extcon_dev *edev,
-				      struct device *dev)
+static inline int extcon_dev_register(struct extcon_dev *edev)
 {
 	return 0;
 }
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index 20e9eef..9ca958c 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,10 +20,10 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state      - the corresponding extcon state (if 0, this struct denotes
- *             the last adc_jack_cond element among the array)
- * @min_adc    - min adc value for this condition
- * @max_adc    - max adc value for this condition
+ * @state:		the corresponding extcon state (if 0, this struct
+ *			denotes the last adc_jack_cond element among the array)
+ * @min_adc:		min adc value for this condition
+ * @max_adc:		max adc value for this condition
  *
  * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
  * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
@@ -33,34 +33,34 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-	u32 state; /* extcon state value. 0 if invalid */
+	u32 state;	/* extcon state value. 0 if invalid */
 	u32 min_adc;
 	u32 max_adc;
 };
 
 /**
  * struct adc_jack_pdata - platform data for adc jack device.
- * @name       - name of the extcon device. If null, "adc-jack" is used.
- * @consumer_channel - Unique name to identify the channel on the consumer
- *                   side. This typically describes the channels used within
- *                   the consumer. E.g. 'battery_voltage'
- * @cable_names        - array of cable names ending with null.
- * @adc_contitions     - array of struct adc_jack_cond conditions ending
- *                     with .state = 0 entry. This describes how to decode
- *                     adc values into extcon state.
- * @irq_flags  - irq flags used for the @irq
- * @handling_delay_ms  - in some devices, we need to read ADC value some
- *                     milli-seconds after the interrupt occurs. You may
- *                     describe such delays with @handling_delay_ms, which
- *                     is rounded-off by jiffies.
+ * @name:		name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel:	Unique name to identify the channel on the consumer
+ *			side. This typically describes the channels used within
+ *			the consumer. E.g. 'battery_voltage'
+ * @cable_names:	array of cable names ending with null.
+ * @adc_contitions:	array of struct adc_jack_cond conditions ending
+ *			with .state = 0 entry. This describes how to decode
+ *			adc values into extcon state.
+ * @irq_flags:		irq flags used for the @irq
+ * @handling_delay_ms:	in some devices, we need to read ADC value some
+ *			milli-seconds after the interrupt occurs. You may
+ *			describe such delays with @handling_delay_ms, which
+ *			is rounded-off by jiffies.
  */
 struct adc_jack_pdata {
 	const char *name;
 	const char *consumer_channel;
-	/*
-	 * The last entry should be NULL
-	 */
+
+	/* The last entry should be NULL */
 	const char **cable_names;
+
 	/* The last entry's state should be 0 */
 	struct adc_jack_cond *adc_conditions;
 
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 2d8307f..4195810 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -25,14 +25,17 @@
 
 /**
  * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device.
- * @name	The name of this GPIO extcon device.
- * @gpio	Corresponding GPIO.
- * @debounce	Debounce time for GPIO IRQ in ms.
- * @irq_flags	IRQ Flags (e.g., IRQF_TRIGGER_LOW).
- * @state_on	print_state is overriden with state_on if attached. If Null,
- *		default method of extcon class is used.
- * @state_off	print_state is overriden with state_on if detached. If Null,
- *		default method of extcon class is used.
+ * @name:		The name of this GPIO extcon device.
+ * @gpio:		Corresponding GPIO.
+ * @gpio_active_low:	Boolean describing whether gpio active state is 1 or 0
+ *			If true, low state of gpio means active.
+ *			If false, high state of gpio means active.
+ * @debounce:		Debounce time for GPIO IRQ in ms.
+ * @irq_flags:		IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @state_on:		print_state is overriden with state_on if attached.
+ *			If NULL, default method of extcon class is used.
+ * @state_off:		print_state is overriden with state_on if detached.
+ *			If NUll, default method of extcon class is used.
  *
  * Note that in order for state_on or state_off to be valid, both state_on
  * and state_off should be not NULL. If at least one of them is NULL,
@@ -41,6 +44,7 @@
 struct gpio_extcon_platform_data {
 	const char *name;
 	unsigned gpio;
+	bool gpio_active_low;
 	unsigned long debounce;
 	unsigned long irq_flags;
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3f40547..955dff5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2292,6 +2292,11 @@
 	if (file)
 		atomic_inc(&file_inode(file)->i_writecount);
 }
+static inline bool inode_is_open_for_write(const struct inode *inode)
+{
+	return atomic_read(&inode->i_writecount) > 0;
+}
+
 #ifdef CONFIG_IMA
 static inline void i_readcount_dec(struct inode *inode)
 {
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index 7823e9e..7714849 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -308,36 +308,6 @@
 	void (*dissociate_pages)(struct fscache_cache *cache);
 };
 
-/*
- * data file or index object cookie
- * - a file will only appear in one cache
- * - a request to cache a file may or may not be honoured, subject to
- *   constraints such as disk space
- * - indices are created on disk just-in-time
- */
-struct fscache_cookie {
-	atomic_t			usage;		/* number of users of this cookie */
-	atomic_t			n_children;	/* number of children of this cookie */
-	atomic_t			n_active;	/* number of active users of netfs ptrs */
-	spinlock_t			lock;
-	spinlock_t			stores_lock;	/* lock on page store tree */
-	struct hlist_head		backing_objects; /* object(s) backing this file/index */
-	const struct fscache_cookie_def	*def;		/* definition */
-	struct fscache_cookie		*parent;	/* parent of this entry */
-	void				*netfs_data;	/* back pointer to netfs */
-	struct radix_tree_root		stores;		/* pages to be stored on this cookie */
-#define FSCACHE_COOKIE_PENDING_TAG	0		/* pages tag: pending write to cache */
-#define FSCACHE_COOKIE_STORING_TAG	1		/* pages tag: writing to cache */
-
-	unsigned long			flags;
-#define FSCACHE_COOKIE_LOOKING_UP	0	/* T if non-index cookie being looked up still */
-#define FSCACHE_COOKIE_NO_DATA_YET	1	/* T if new object with no cached data yet */
-#define FSCACHE_COOKIE_UNAVAILABLE	2	/* T if cookie is unavailable (error, etc) */
-#define FSCACHE_COOKIE_INVALIDATING	3	/* T if cookie is being invalidated */
-#define FSCACHE_COOKIE_RELINQUISHED	4	/* T if cookie has been relinquished */
-#define FSCACHE_COOKIE_RETIRED		5	/* T if cookie was retired */
-};
-
 extern struct fscache_cookie fscache_fsdef_index;
 
 /*
@@ -400,6 +370,7 @@
 #define FSCACHE_OBJECT_IS_LIVE		3	/* T if object is not withdrawn or relinquished */
 #define FSCACHE_OBJECT_IS_LOOKED_UP	4	/* T if object has been looked up */
 #define FSCACHE_OBJECT_IS_AVAILABLE	5	/* T if object has become active */
+#define FSCACHE_OBJECT_RETIRED		6	/* T if object was retired on relinquishment */
 
 	struct list_head	cache_link;	/* link in cache->object_list */
 	struct hlist_node	cookie_link;	/* link in cookie->backing_objects */
@@ -511,6 +482,11 @@
 	op->end_io_func(page, op->context, error);
 }
 
+static inline void __fscache_use_cookie(struct fscache_cookie *cookie)
+{
+	atomic_inc(&cookie->n_active);
+}
+
 /**
  * fscache_use_cookie - Request usage of cookie attached to an object
  * @object: Object description
@@ -524,6 +500,16 @@
 	return atomic_inc_not_zero(&cookie->n_active) != 0;
 }
 
+static inline bool __fscache_unuse_cookie(struct fscache_cookie *cookie)
+{
+	return atomic_dec_and_test(&cookie->n_active);
+}
+
+static inline void __fscache_wake_unused_cookie(struct fscache_cookie *cookie)
+{
+	wake_up_atomic_t(&cookie->n_active);
+}
+
 /**
  * fscache_unuse_cookie - Cease usage of cookie attached to an object
  * @object: Object description
@@ -534,8 +520,8 @@
 static inline void fscache_unuse_cookie(struct fscache_object *object)
 {
 	struct fscache_cookie *cookie = object->cookie;
-	if (atomic_dec_and_test(&cookie->n_active))
-		wake_up_atomic_t(&cookie->n_active);
+	if (__fscache_unuse_cookie(cookie))
+		__fscache_wake_unused_cookie(cookie);
 }
 
 /*
diff --git a/include/linux/fscache.h b/include/linux/fscache.h
index 19b4645..115bb81 100644
--- a/include/linux/fscache.h
+++ b/include/linux/fscache.h
@@ -167,6 +167,42 @@
 };
 
 /*
+ * data file or index object cookie
+ * - a file will only appear in one cache
+ * - a request to cache a file may or may not be honoured, subject to
+ *   constraints such as disk space
+ * - indices are created on disk just-in-time
+ */
+struct fscache_cookie {
+	atomic_t			usage;		/* number of users of this cookie */
+	atomic_t			n_children;	/* number of children of this cookie */
+	atomic_t			n_active;	/* number of active users of netfs ptrs */
+	spinlock_t			lock;
+	spinlock_t			stores_lock;	/* lock on page store tree */
+	struct hlist_head		backing_objects; /* object(s) backing this file/index */
+	const struct fscache_cookie_def	*def;		/* definition */
+	struct fscache_cookie		*parent;	/* parent of this entry */
+	void				*netfs_data;	/* back pointer to netfs */
+	struct radix_tree_root		stores;		/* pages to be stored on this cookie */
+#define FSCACHE_COOKIE_PENDING_TAG	0		/* pages tag: pending write to cache */
+#define FSCACHE_COOKIE_STORING_TAG	1		/* pages tag: writing to cache */
+
+	unsigned long			flags;
+#define FSCACHE_COOKIE_LOOKING_UP	0	/* T if non-index cookie being looked up still */
+#define FSCACHE_COOKIE_NO_DATA_YET	1	/* T if new object with no cached data yet */
+#define FSCACHE_COOKIE_UNAVAILABLE	2	/* T if cookie is unavailable (error, etc) */
+#define FSCACHE_COOKIE_INVALIDATING	3	/* T if cookie is being invalidated */
+#define FSCACHE_COOKIE_RELINQUISHED	4	/* T if cookie has been relinquished */
+#define FSCACHE_COOKIE_ENABLED		5	/* T if cookie is enabled */
+#define FSCACHE_COOKIE_ENABLEMENT_LOCK	6	/* T if cookie is being en/disabled */
+};
+
+static inline bool fscache_cookie_enabled(struct fscache_cookie *cookie)
+{
+	return test_bit(FSCACHE_COOKIE_ENABLED, &cookie->flags);
+}
+
+/*
  * slow-path functions for when there is actually caching available, and the
  * netfs does actually have a valid token
  * - these are not to be called directly
@@ -181,8 +217,8 @@
 extern struct fscache_cookie *__fscache_acquire_cookie(
 	struct fscache_cookie *,
 	const struct fscache_cookie_def *,
-	void *);
-extern void __fscache_relinquish_cookie(struct fscache_cookie *, int);
+	void *, bool);
+extern void __fscache_relinquish_cookie(struct fscache_cookie *, bool);
 extern int __fscache_check_consistency(struct fscache_cookie *);
 extern void __fscache_update_cookie(struct fscache_cookie *);
 extern int __fscache_attr_changed(struct fscache_cookie *);
@@ -211,6 +247,9 @@
 					      struct inode *);
 extern void __fscache_readpages_cancel(struct fscache_cookie *cookie,
 				       struct list_head *pages);
+extern void __fscache_disable_cookie(struct fscache_cookie *, bool);
+extern void __fscache_enable_cookie(struct fscache_cookie *,
+				    bool (*)(void *), void *);
 
 /**
  * fscache_register_netfs - Register a filesystem as desiring caching services
@@ -289,6 +328,7 @@
  * @def: A description of the cache object, including callback operations
  * @netfs_data: An arbitrary piece of data to be kept in the cookie to
  * represent the cache object to the netfs
+ * @enable: Whether or not to enable a data cookie immediately
  *
  * This function is used to inform FS-Cache about part of an index hierarchy
  * that can be used to locate files.  This is done by requesting a cookie for
@@ -301,10 +341,12 @@
 struct fscache_cookie *fscache_acquire_cookie(
 	struct fscache_cookie *parent,
 	const struct fscache_cookie_def *def,
-	void *netfs_data)
+	void *netfs_data,
+	bool enable)
 {
-	if (fscache_cookie_valid(parent))
-		return __fscache_acquire_cookie(parent, def, netfs_data);
+	if (fscache_cookie_valid(parent) && fscache_cookie_enabled(parent))
+		return __fscache_acquire_cookie(parent, def, netfs_data,
+						enable);
 	else
 		return NULL;
 }
@@ -322,7 +364,7 @@
  * description.
  */
 static inline
-void fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire)
+void fscache_relinquish_cookie(struct fscache_cookie *cookie, bool retire)
 {
 	if (fscache_cookie_valid(cookie))
 		__fscache_relinquish_cookie(cookie, retire);
@@ -341,7 +383,7 @@
 static inline
 int fscache_check_consistency(struct fscache_cookie *cookie)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		return __fscache_check_consistency(cookie);
 	else
 		return 0;
@@ -360,7 +402,7 @@
 static inline
 void fscache_update_cookie(struct fscache_cookie *cookie)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		__fscache_update_cookie(cookie);
 }
 
@@ -407,7 +449,7 @@
 static inline
 int fscache_attr_changed(struct fscache_cookie *cookie)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		return __fscache_attr_changed(cookie);
 	else
 		return -ENOBUFS;
@@ -429,7 +471,7 @@
 static inline
 void fscache_invalidate(struct fscache_cookie *cookie)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		__fscache_invalidate(cookie);
 }
 
@@ -503,7 +545,7 @@
 			       void *context,
 			       gfp_t gfp)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		return __fscache_read_or_alloc_page(cookie, page, end_io_func,
 						    context, gfp);
 	else
@@ -554,7 +596,7 @@
 				void *context,
 				gfp_t gfp)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		return __fscache_read_or_alloc_pages(cookie, mapping, pages,
 						     nr_pages, end_io_func,
 						     context, gfp);
@@ -585,7 +627,7 @@
 		       struct page *page,
 		       gfp_t gfp)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		return __fscache_alloc_page(cookie, page, gfp);
 	else
 		return -ENOBUFS;
@@ -634,7 +676,7 @@
 		       struct page *page,
 		       gfp_t gfp)
 {
-	if (fscache_cookie_valid(cookie))
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
 		return __fscache_write_page(cookie, page, gfp);
 	else
 		return -ENOBUFS;
@@ -744,4 +786,47 @@
 		__fscache_uncache_all_inode_pages(cookie, inode);
 }
 
+/**
+ * fscache_disable_cookie - Disable a cookie
+ * @cookie: The cookie representing the cache object
+ * @invalidate: Invalidate the backing object
+ *
+ * Disable a cookie from accepting further alloc, read, write, invalidate,
+ * update or acquire operations.  Outstanding operations can still be waited
+ * upon and pages can still be uncached and the cookie relinquished.
+ *
+ * This will not return until all outstanding operations have completed.
+ *
+ * If @invalidate is set, then the backing object will be invalidated and
+ * detached, otherwise it will just be detached.
+ */
+static inline
+void fscache_disable_cookie(struct fscache_cookie *cookie, bool invalidate)
+{
+	if (fscache_cookie_valid(cookie) && fscache_cookie_enabled(cookie))
+		__fscache_disable_cookie(cookie, invalidate);
+}
+
+/**
+ * fscache_enable_cookie - Reenable a cookie
+ * @cookie: The cookie representing the cache object
+ * @can_enable: A function to permit enablement once lock is held
+ * @data: Data for can_enable()
+ *
+ * Reenable a previously disabled cookie, allowing it to accept further alloc,
+ * read, write, invalidate, update or acquire operations.  An attempt will be
+ * made to immediately reattach the cookie to a backing object.
+ *
+ * The can_enable() function is called (if not NULL) once the enablement lock
+ * is held to rule on whether enablement is still permitted to go ahead.
+ */
+static inline
+void fscache_enable_cookie(struct fscache_cookie *cookie,
+			   bool (*can_enable)(void *data),
+			   void *data)
+{
+	if (fscache_cookie_valid(cookie) && !fscache_cookie_enabled(cookie))
+		__fscache_enable_cookie(cookie, can_enable, data);
+}
+
 #endif /* _LINUX_FSCACHE_H */
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index 32ba451..a265af2 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -47,11 +47,13 @@
  * @hdev:		Stores the hid instance.
  * @vendor_id:		Vendor id of hub device.
  * @product_id:		Product id of hub device.
+ * @ref_cnt:		Number of MFD clients have opened this device
  */
 struct hid_sensor_hub_device {
 	struct hid_device *hdev;
 	u32 vendor_id;
 	u32 product_id;
+	int ref_cnt;
 };
 
 /**
@@ -74,6 +76,22 @@
 			 void *priv);
 };
 
+/**
+* sensor_hub_device_open() - Open hub device
+* @hsdev:	Hub device instance.
+*
+* Used to open hid device for sensor hub.
+*/
+int sensor_hub_device_open(struct hid_sensor_hub_device *hsdev);
+
+/**
+* sensor_hub_device_clode() - Close hub device
+* @hsdev:	Hub device instance.
+*
+* Used to clode hid device for sensor hub.
+*/
+void sensor_hub_device_close(struct hid_sensor_hub_device *hsdev);
+
 /* Registration functions */
 
 /**
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index d98503b..15da677 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -432,15 +432,6 @@
 	u32 ring_data_startoffset;
 };
 
-struct hv_ring_buffer_debug_info {
-	u32 current_interrupt_mask;
-	u32 current_read_index;
-	u32 current_write_index;
-	u32 bytes_avail_toread;
-	u32 bytes_avail_towrite;
-};
-
-
 /*
  *
  * hv_get_ringbuffer_availbytes()
@@ -902,23 +893,6 @@
 	CHANNEL_OPENED_STATE,
 };
 
-struct vmbus_channel_debug_info {
-	u32 relid;
-	enum vmbus_channel_state state;
-	uuid_le interfacetype;
-	uuid_le interface_instance;
-	u32 monitorid;
-	u32 servermonitor_pending;
-	u32 servermonitor_latency;
-	u32 servermonitor_connectionid;
-	u32 clientmonitor_pending;
-	u32 clientmonitor_latency;
-	u32 clientmonitor_connectionid;
-
-	struct hv_ring_buffer_debug_info inbound;
-	struct hv_ring_buffer_debug_info outbound;
-};
-
 /*
  * Represents each channel msg on the vmbus connection This is a
  * variable-size data structure depending on the msg type itself
@@ -1184,19 +1158,8 @@
 				     u64 *requestid);
 
 
-extern void vmbus_get_debug_info(struct vmbus_channel *channel,
-				     struct vmbus_channel_debug_info *debug);
-
 extern void vmbus_ontimer(unsigned long data);
 
-struct hv_dev_port_info {
-	u32 int_mask;
-	u32 read_idx;
-	u32 write_idx;
-	u32 bytes_avail_toread;
-	u32 bytes_avail_towrite;
-};
-
 /* Base driver object */
 struct hv_driver {
 	const char *name;
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 81cbbdb..673a3ce 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -26,6 +26,7 @@
 #define __TWL_H_
 
 #include <linux/types.h>
+#include <linux/phy/phy.h>
 #include <linux/input/matrix_keypad.h>
 
 /*
@@ -615,6 +616,7 @@
 struct twl4030_usb_data {
 	enum twl4030_usb_mode	usb_mode;
 	unsigned long		features;
+	struct phy_init_data	*init_data;
 
 	int		(*phy_init)(struct device *dev);
 	int		(*phy_exit)(struct device *dev);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index b179749..46a1422 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1514,7 +1514,7 @@
 
 char *ide_media_string(ide_drive_t *);
 
-extern struct device_attribute ide_dev_attrs[];
+extern const struct attribute_group *ide_dev_groups[];
 extern struct bus_type ide_bus_type;
 extern struct class *ide_port_class;
 
diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
index 2bac0eb..15607b4 100644
--- a/include/linux/iio/buffer.h
+++ b/include/linux/iio/buffer.h
@@ -11,6 +11,7 @@
 #define _IIO_BUFFER_GENERIC_H_
 #include <linux/sysfs.h>
 #include <linux/iio/iio.h>
+#include <linux/kref.h>
 
 #ifdef CONFIG_IIO_BUFFER
 
@@ -26,6 +27,8 @@
  * @set_bytes_per_datum:set number of bytes per datum
  * @get_length:		get number of datums in buffer
  * @set_length:		set number of datums in buffer
+ * @release:		called when the last reference to the buffer is dropped,
+ *			should free all resources allocated by the buffer.
  *
  * The purpose of this structure is to make the buffer element
  * modular as event for a given driver, different usecases may require
@@ -36,7 +39,7 @@
  * any of them not existing.
  **/
 struct iio_buffer_access_funcs {
-	int (*store_to)(struct iio_buffer *buffer, u8 *data);
+	int (*store_to)(struct iio_buffer *buffer, const void *data);
 	int (*read_first_n)(struct iio_buffer *buffer,
 			    size_t n,
 			    char __user *buf);
@@ -47,6 +50,8 @@
 	int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd);
 	int (*get_length)(struct iio_buffer *buffer);
 	int (*set_length)(struct iio_buffer *buffer, int length);
+
+	void (*release)(struct iio_buffer *buffer);
 };
 
 /**
@@ -67,6 +72,7 @@
  * @demux_list:		[INTERN] list of operations required to demux the scan.
  * @demux_bounce:	[INTERN] buffer for doing gather from incoming scan.
  * @buffer_list:	[INTERN] entry in the devices list of current buffers.
+ * @ref:		[INTERN] reference count of the buffer.
  */
 struct iio_buffer {
 	int					length;
@@ -81,8 +87,9 @@
 	bool					stufftoread;
 	const struct attribute_group *attrs;
 	struct list_head			demux_list;
-	unsigned char				*demux_bounce;
+	void					*demux_bounce;
 	struct list_head			buffer_list;
+	struct kref				ref;
 };
 
 /**
@@ -120,7 +127,32 @@
  * @indio_dev:		iio_dev structure for device.
  * @data:		Full scan.
  */
-int iio_push_to_buffers(struct iio_dev *indio_dev, unsigned char *data);
+int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data);
+
+/*
+ * iio_push_to_buffers_with_timestamp() - push data and timestamp to buffers
+ * @indio_dev:		iio_dev structure for device.
+ * @data:		sample data
+ * @timestamp:		timestamp for the sample data
+ *
+ * Pushes data to the IIO device's buffers. If timestamps are enabled for the
+ * device the function will store the supplied timestamp as the last element in
+ * the sample data buffer before pushing it to the device buffers. The sample
+ * data buffer needs to be large enough to hold the additional timestamp
+ * (usually the buffer should be indio->scan_bytes bytes large).
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static inline int iio_push_to_buffers_with_timestamp(struct iio_dev *indio_dev,
+	void *data, int64_t timestamp)
+{
+	if (indio_dev->scan_timestamp) {
+		size_t ts_offset = indio_dev->scan_bytes / sizeof(int64_t) - 1;
+		((int64_t *)data)[ts_offset] = timestamp;
+	}
+
+	return iio_push_to_buffers(indio_dev, data);
+}
 
 int iio_update_demux(struct iio_dev *indio_dev);
 
@@ -174,11 +206,27 @@
 					   iio_buffer_show_enable,	\
 					   iio_buffer_store_enable)
 
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev);
-
 bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
 	const unsigned long *mask);
 
+struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer);
+void iio_buffer_put(struct iio_buffer *buffer);
+
+/**
+ * iio_device_attach_buffer - Attach a buffer to a IIO device
+ * @indio_dev: The device the buffer should be attached to
+ * @buffer: The buffer to attach to the device
+ *
+ * This function attaches a buffer to a IIO device. The buffer stays attached to
+ * the device until the device is freed. The function should only be called at
+ * most once per device.
+ */
+static inline void iio_device_attach_buffer(struct iio_dev *indio_dev,
+	struct iio_buffer *buffer)
+{
+	indio_dev->buffer = iio_buffer_get(buffer);
+}
+
 #else /* CONFIG_IIO_BUFFER */
 
 static inline int iio_buffer_register(struct iio_dev *indio_dev,
@@ -191,6 +239,9 @@
 static inline void iio_buffer_unregister(struct iio_dev *indio_dev)
 {}
 
+static inline void iio_buffer_get(struct iio_buffer *buffer) {}
+static inline void iio_buffer_put(struct iio_buffer *buffer) {}
+
 #endif /* CONFIG_IIO_BUFFER */
 
 #endif /* _IIO_BUFFER_GENERIC_H_ */
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index e51f654..3c005eb 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -16,6 +16,7 @@
 #include <linux/irqreturn.h>
 #include <linux/iio/trigger.h>
 #include <linux/bitops.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/platform_data/st_sensors_pdata.h>
 
@@ -184,6 +185,7 @@
 	u8 wai;
 	char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
 	struct iio_chan_spec *ch;
+	int num_ch;
 	struct st_sensor_odr odr;
 	struct st_sensor_power pw;
 	struct st_sensor_axis enable_axis;
@@ -200,6 +202,8 @@
  * @trig: The trigger in use by the core driver.
  * @sensor: Pointer to the current sensor struct in use.
  * @current_fullscale: Maximum range of measure by the sensor.
+ * @vdd: Pointer to sensor's Vdd power supply
+ * @vdd_io: Pointer to sensor's Vdd-IO power supply
  * @enabled: Status of the sensor (false->off, true->on).
  * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
  * @buffer_data: Data used by buffer part.
@@ -215,6 +219,8 @@
 	struct iio_trigger *trig;
 	struct st_sensors *sensor;
 	struct st_sensor_fullscale_avl *current_fullscale;
+	struct regulator *vdd;
+	struct regulator *vdd_io;
 
 	bool enabled;
 	bool multiread_bit;
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 833926c..2752b1f 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -77,7 +77,7 @@
  * fail.
  */
 struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
-					     int (*cb)(u8 *data,
+					     int (*cb)(const void *data,
 						       void *private),
 					     void *private);
 /**
diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h
index 13ce220..5dab2c4 100644
--- a/include/linux/iio/events.h
+++ b/include/linux/iio/events.h
@@ -26,20 +26,6 @@
 
 #define IIO_GET_EVENT_FD_IOCTL _IOR('i', 0x90, int)
 
-enum iio_event_type {
-	IIO_EV_TYPE_THRESH,
-	IIO_EV_TYPE_MAG,
-	IIO_EV_TYPE_ROC,
-	IIO_EV_TYPE_THRESH_ADAPTIVE,
-	IIO_EV_TYPE_MAG_ADAPTIVE,
-};
-
-enum iio_event_direction {
-	IIO_EV_DIR_EITHER,
-	IIO_EV_DIR_RISING,
-	IIO_EV_DIR_FALLING,
-};
-
 /**
  * IIO_EVENT_CODE() - create event identifier
  * @chan_type:	Type of the channel. Should be one of enum iio_chan_type.
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 2103cc3..256a90a 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -36,6 +36,14 @@
 	IIO_CHAN_INFO_PHASE,
 	IIO_CHAN_INFO_HARDWAREGAIN,
 	IIO_CHAN_INFO_HYSTERESIS,
+	IIO_CHAN_INFO_INT_TIME,
+};
+
+enum iio_shared_by {
+	IIO_SEPARATE,
+	IIO_SHARED_BY_TYPE,
+	IIO_SHARED_BY_DIR,
+	IIO_SHARED_BY_ALL
 };
 
 enum iio_endian {
@@ -57,7 +65,7 @@
  */
 struct iio_chan_spec_ext_info {
 	const char *name;
-	bool shared;
+	enum iio_shared_by shared;
 	ssize_t (*read)(struct iio_dev *, uintptr_t private,
 			struct iio_chan_spec const *, char *buf);
 	ssize_t (*write)(struct iio_dev *, uintptr_t private,
@@ -125,12 +133,35 @@
 #define IIO_ENUM_AVAILABLE(_name, _e) \
 { \
 	.name = (_name "_available"), \
-	.shared = true, \
+	.shared = IIO_SHARED_BY_TYPE, \
 	.read = iio_enum_available_read, \
 	.private = (uintptr_t)(_e), \
 }
 
 /**
+ * struct iio_event_spec - specification for a channel event
+ * @type:		    Type of the event
+ * @dir:		    Direction of the event
+ * @mask_separate:	    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be registered per channel.
+ * @mask_shared_by_type:    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be shared by channel type.
+ * @mask_shared_by_dir:	    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be shared by channel type and
+ *			    direction.
+ * @mask_shared_by_all:	    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be shared by all channels.
+ */
+struct iio_event_spec {
+	enum iio_event_type type;
+	enum iio_event_direction dir;
+	unsigned long mask_separate;
+	unsigned long mask_shared_by_type;
+	unsigned long mask_shared_by_dir;
+	unsigned long mask_shared_by_all;
+};
+
+/**
  * struct iio_chan_spec - specification of a single channel
  * @type:		What type of measurement is the channel making.
  * @channel:		What number do we wish to assign the channel.
@@ -146,13 +177,18 @@
  *			shift:		Shift right by this before masking out
  *					realbits.
  *			endianness:	little or big endian
- * @info_mask:		What information is to be exported about this channel.
- *			This includes calibbias, scale etc.
  * @info_mask_separate: What information is to be exported that is specific to
  *			this channel.
  * @info_mask_shared_by_type: What information is to be exported that is shared
-*			by all channels of the same type.
+ *			by all channels of the same type.
+ * @info_mask_shared_by_dir: What information is to be exported that is shared
+ *			by all channels of the same direction.
+ * @info_mask_shared_by_all: What information is to be exported that is shared
+ *			by all channels.
  * @event_mask:		What events can this channel produce.
+ * @event_spec:		Array of events which should be registered for this
+ *			channel.
+ * @num_event_specs:	Size of the event_spec array.
  * @ext_info:		Array of extended info attributes for this channel.
  *			The array is NULL terminated, the last element should
  *			have its name field set to NULL.
@@ -186,10 +222,13 @@
 		u8	shift;
 		enum iio_endian endianness;
 	} scan_type;
-	long			info_mask;
 	long			info_mask_separate;
 	long			info_mask_shared_by_type;
+	long			info_mask_shared_by_dir;
+	long			info_mask_shared_by_all;
 	long			event_mask;
+	const struct iio_event_spec *event_spec;
+	unsigned int		num_event_specs;
 	const struct iio_chan_spec_ext_info *ext_info;
 	const char		*extend_name;
 	const char		*datasheet_name;
@@ -212,7 +251,9 @@
 	enum iio_chan_info_enum type)
 {
 	return (chan->info_mask_separate & BIT(type)) |
-	       (chan->info_mask_shared_by_type & BIT(type));
+		(chan->info_mask_shared_by_type & BIT(type)) |
+		(chan->info_mask_shared_by_dir & BIT(type)) |
+		(chan->info_mask_shared_by_all & BIT(type));
 }
 
 #define IIO_ST(si, rb, sb, sh)						\
@@ -270,6 +311,12 @@
  *			is event dependant. event_code specifies which event.
  * @write_event_value:	write the value associated with the event.
  *			Meaning is event dependent.
+ * @read_event_config_new: find out if the event is enabled. New style interface.
+ * @write_event_config_new: set if the event is enabled. New style interface.
+ * @read_event_value_new: read a configuration value associated with the event.
+ *                         New style interface.
+ * @write_event_value_new: write a configuration value for the event. New style
+ *			   interface.
  * @validate_trigger:	function to validate the trigger when the
  *			current trigger gets changed.
  * @update_scan_mode:	function to configure device and scan buffer when
@@ -310,6 +357,30 @@
 	int (*write_event_value)(struct iio_dev *indio_dev,
 				 u64 event_code,
 				 int val);
+
+	int (*read_event_config_new)(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir);
+
+	int (*write_event_config_new)(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  int state);
+
+	int (*read_event_value_new)(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info, int *val, int *val2);
+
+	int (*write_event_value_new)(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int val, int val2);
+
 	int (*validate_trigger)(struct iio_dev *indio_dev,
 				struct iio_trigger *trig);
 	int (*update_scan_mode)(struct iio_dev *indio_dev,
@@ -457,7 +528,7 @@
 {
 	if (indio_dev)
 		put_device(&indio_dev->dev);
-};
+}
 
 /**
  * dev_to_iio_dev() - Get IIO device struct from a device struct
@@ -593,7 +664,7 @@
 {
 	return indio_dev->currentmode
 		& (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE);
-};
+}
 
 /**
  * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry
@@ -603,12 +674,12 @@
 static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
 {
 	return indio_dev->debugfs_dentry;
-};
+}
 #else
 static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
 {
 	return NULL;
-};
+}
 #endif
 
 int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer,
diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h
index 2958c96..8a1d186 100644
--- a/include/linux/iio/sysfs.h
+++ b/include/linux/iio/sysfs.h
@@ -100,6 +100,21 @@
 #define IIO_CONST_ATTR_SAMP_FREQ_AVAIL(_string)			\
 	IIO_CONST_ATTR(sampling_frequency_available, _string)
 
+/**
+ * IIO_DEV_ATTR_INT_TIME_AVAIL - list available integration times
+ * @_show: output method for the attribute
+ **/
+#define IIO_DEV_ATTR_INT_TIME_AVAIL(_show)		\
+	IIO_DEVICE_ATTR(integration_time_available, S_IRUGO, _show, NULL, 0)
+/**
+ * IIO_CONST_ATTR_INT_TIME_AVAIL - list available integration times
+ * @_string: frequency string for the attribute
+ *
+ * Constant version
+ **/
+#define IIO_CONST_ATTR_INT_TIME_AVAIL(_string)		\
+	IIO_CONST_ATTR(integration_time_available, _string)
+
 #define IIO_DEV_ATTR_TEMP_RAW(_show)			\
 	IIO_DEVICE_ATTR(in_temp_raw, S_IRUGO, _show, NULL, 0)
 
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 88bf0f0..4ac928e 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -54,6 +54,26 @@
 	IIO_MOD_LIGHT_BLUE,
 };
 
+enum iio_event_type {
+	IIO_EV_TYPE_THRESH,
+	IIO_EV_TYPE_MAG,
+	IIO_EV_TYPE_ROC,
+	IIO_EV_TYPE_THRESH_ADAPTIVE,
+	IIO_EV_TYPE_MAG_ADAPTIVE,
+};
+
+enum iio_event_info {
+	IIO_EV_INFO_ENABLE,
+	IIO_EV_INFO_VALUE,
+	IIO_EV_INFO_HYSTERESIS,
+};
+
+enum iio_event_direction {
+	IIO_EV_DIR_EITHER,
+	IIO_EV_DIR_RISING,
+	IIO_EV_DIR_FALLING,
+};
+
 #define IIO_VAL_INT 1
 #define IIO_VAL_INT_PLUS_MICRO 2
 #define IIO_VAL_INT_PLUS_NANO 3
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 5e865b5..c9e831d 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -19,6 +19,7 @@
 
 #include <linux/atomic.h>
 #include <asm/ptrace.h>
+#include <asm/irq.h>
 
 /*
  * These correspond to the IORESOURCE_IRQ_* defines in
@@ -374,6 +375,16 @@
 
 asmlinkage void do_softirq(void);
 asmlinkage void __do_softirq(void);
+
+#ifdef __ARCH_HAS_DO_SOFTIRQ
+void do_softirq_own_stack(void);
+#else
+static inline void do_softirq_own_stack(void)
+{
+	__do_softirq();
+}
+#endif
+
 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
 extern void softirq_init(void);
 extern void __raise_softirq_irqoff(unsigned int nr);
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index 19c19a5..f6c82de 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -34,9 +34,9 @@
 	int		sem_ctls[4];
 	int		used_sems;
 
-	int		msg_ctlmax;
-	int		msg_ctlmnb;
-	int		msg_ctlmni;
+	unsigned int	msg_ctlmax;
+	unsigned int	msg_ctlmnb;
+	unsigned int	msg_ctlmni;
 	atomic_t	msg_bytes;
 	atomic_t	msg_hdrs;
 	int		auto_msgmni;
diff --git a/include/linux/irqchip/bcm2835.h b/include/linux/irqchip/bcm2835.h
deleted file mode 100644
index 48a859b..0000000
--- a/include/linux/irqchip/bcm2835.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_IRQCHIP_BCM2835_H_
-#define __LINUX_IRQCHIP_BCM2835_H_
-
-#include <asm/exception.h>
-
-extern void bcm2835_init_irq(void);
-
-extern asmlinkage void __exception_irq_entry bcm2835_handle_irq(
-	struct pt_regs *regs);
-
-#endif
diff --git a/include/linux/kobj_completion.h b/include/linux/kobj_completion.h
new file mode 100644
index 0000000..a428f64
--- /dev/null
+++ b/include/linux/kobj_completion.h
@@ -0,0 +1,18 @@
+#ifndef _KOBJ_COMPLETION_H_
+#define _KOBJ_COMPLETION_H_
+
+#include <linux/kobject.h>
+#include <linux/completion.h>
+
+struct kobj_completion {
+	struct kobject kc_kobj;
+	struct completion kc_unregister;
+};
+
+#define kobj_to_kobj_completion(kobj) \
+	container_of(kobj, struct kobj_completion, kc_kobj)
+
+void kobj_completion_init(struct kobj_completion *kc, struct kobj_type *ktype);
+void kobj_completion_release(struct kobject *kobj);
+void kobj_completion_del_and_wait(struct kobj_completion *kc);
+#endif /* _KOBJ_COMPLETION_H_ */
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index de6dcbcc..e7ba650 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -107,6 +107,7 @@
 extern struct kobject *kobject_get(struct kobject *kobj);
 extern void kobject_put(struct kobject *kobj);
 
+extern const void *kobject_namespace(struct kobject *kobj);
 extern char *kobject_get_path(struct kobject *kobj, gfp_t flag);
 
 struct kobj_type {
diff --git a/include/linux/lockref.h b/include/linux/lockref.h
index f279ed9..13dfd36 100644
--- a/include/linux/lockref.h
+++ b/include/linux/lockref.h
@@ -36,4 +36,10 @@
 extern void lockref_mark_dead(struct lockref *);
 extern int lockref_get_not_dead(struct lockref *);
 
+/* Must be called under spinlock for reliable results */
+static inline int __lockref_is_dead(const struct lockref *l)
+{
+	return ((int)l->count < 0);
+}
+
 #endif /* __LINUX_LOCKREF_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index ca0790f..060e112 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -12,6 +12,8 @@
 #include <linux/notifier.h>
 #include <linux/err.h>
 
+#include <dt-bindings/mfd/dbx500-prcmu.h> /* For clock identifiers */
+
 /* Offset for the firmware version within the TCPM */
 #define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
 #define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
@@ -94,74 +96,6 @@
 #define PRCMU_CLKSRC_ARMCLKFIX		0x46
 #define PRCMU_CLKSRC_HDMICLK		0x47
 
-/*
- * Clock identifiers.
- */
-enum prcmu_clock {
-	PRCMU_SGACLK,
-	PRCMU_UARTCLK,
-	PRCMU_MSP02CLK,
-	PRCMU_MSP1CLK,
-	PRCMU_I2CCLK,
-	PRCMU_SDMMCCLK,
-	PRCMU_SPARE1CLK,
-	PRCMU_SLIMCLK,
-	PRCMU_PER1CLK,
-	PRCMU_PER2CLK,
-	PRCMU_PER3CLK,
-	PRCMU_PER5CLK,
-	PRCMU_PER6CLK,
-	PRCMU_PER7CLK,
-	PRCMU_LCDCLK,
-	PRCMU_BMLCLK,
-	PRCMU_HSITXCLK,
-	PRCMU_HSIRXCLK,
-	PRCMU_HDMICLK,
-	PRCMU_APEATCLK,
-	PRCMU_APETRACECLK,
-	PRCMU_MCDECLK,
-	PRCMU_IPI2CCLK,
-	PRCMU_DSIALTCLK,
-	PRCMU_DMACLK,
-	PRCMU_B2R2CLK,
-	PRCMU_TVCLK,
-	PRCMU_SSPCLK,
-	PRCMU_RNGCLK,
-	PRCMU_UICCCLK,
-	PRCMU_PWMCLK,
-	PRCMU_IRDACLK,
-	PRCMU_IRRCCLK,
-	PRCMU_SIACLK,
-	PRCMU_SVACLK,
-	PRCMU_ACLK,
-	PRCMU_HVACLK, /* Ux540 only */
-	PRCMU_G1CLK, /* Ux540 only */
-	PRCMU_SDMMCHCLK,
-	PRCMU_CAMCLK,
-	PRCMU_BML8580CLK,
-	PRCMU_NUM_REG_CLOCKS,
-	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
-	PRCMU_CDCLK,
-	PRCMU_TIMCLK,
-	PRCMU_PLLSOC0,
-	PRCMU_PLLSOC1,
-	PRCMU_ARMSS,
-	PRCMU_PLLDDR,
-	PRCMU_PLLDSI,
-	PRCMU_DSI0CLK,
-	PRCMU_DSI1CLK,
-	PRCMU_DSI0ESCCLK,
-	PRCMU_DSI1ESCCLK,
-	PRCMU_DSI2ESCCLK,
-	/* LCD DSI PLL - Ux540 only */
-	PRCMU_PLLDSI_LCD,
-	PRCMU_DSI0CLK_LCD,
-	PRCMU_DSI1CLK_LCD,
-	PRCMU_DSI0ESCCLK_LCD,
-	PRCMU_DSI1ESCCLK_LCD,
-	PRCMU_DSI2ESCCLK_LCD,
-};
-
 /**
  * enum prcmu_wdog_id - PRCMU watchdog IDs
  * @PRCMU_WDOG_ALL: use all timers
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
index b6bdcd6..7086b22 100644
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -363,4 +363,9 @@
 #define IMX6Q_GPR13_SATA_TX_LVL_1_240_V		(0x1f << 2)
 #define IMX6Q_GPR13_SATA_MPLL_CLK_EN		BIT(1)
 #define IMX6Q_GPR13_SATA_TX_EDGE_RATE		BIT(0)
+
+/* For imx6sl iomux gpr register field define */
+#define IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK    (0x3 << 17)
+#define IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK    (0x1 << 14)
+
 #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 25f2c61..08cce7f 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -46,16 +46,24 @@
 /* Step Enable */
 #define STEPENB_MASK		(0x1FFFF << 0)
 #define STEPENB(val)		((val) << 0)
+#define ENB(val)			(1 << (val))
+#define STPENB_STEPENB		STEPENB(0x1FFFF)
+#define STPENB_STEPENB_TC	STEPENB(0x1FFF)
 
 /* IRQ enable */
 #define IRQENB_HW_PEN		BIT(0)
 #define IRQENB_FIFO0THRES	BIT(2)
+#define IRQENB_FIFO0OVRRUN	BIT(3)
+#define IRQENB_FIFO0UNDRFLW	BIT(4)
 #define IRQENB_FIFO1THRES	BIT(5)
+#define IRQENB_FIFO1OVRRUN	BIT(6)
+#define IRQENB_FIFO1UNDRFLW	BIT(7)
 #define IRQENB_PENUP		BIT(9)
 
 /* Step Configuration */
 #define STEPCONFIG_MODE_MASK	(3 << 0)
 #define STEPCONFIG_MODE(val)	((val) << 0)
+#define STEPCONFIG_MODE_SWCNT	STEPCONFIG_MODE(1)
 #define STEPCONFIG_MODE_HWSYNC	STEPCONFIG_MODE(2)
 #define STEPCONFIG_AVG_MASK	(7 << 2)
 #define STEPCONFIG_AVG(val)	((val) << 2)
@@ -123,6 +131,7 @@
 #define ADC_CLK			3000000
 #define TOTAL_STEPS		16
 #define TOTAL_CHANNELS		8
+#define FIFO1_THRESHOLD		19
 
 /*
 * ADC runs at 3MHz, and it takes
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 25f5d2d..adf4070 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2874,8 +2874,20 @@
 #define dev_proc_init() 0
 #endif
 
-extern int netdev_class_create_file(struct class_attribute *class_attr);
-extern void netdev_class_remove_file(struct class_attribute *class_attr);
+extern int netdev_class_create_file_ns(struct class_attribute *class_attr,
+				       const void *ns);
+extern void netdev_class_remove_file_ns(struct class_attribute *class_attr,
+					const void *ns);
+
+static inline int netdev_class_create_file(struct class_attribute *class_attr)
+{
+	return netdev_class_create_file_ns(class_attr, NULL);
+}
+
+static inline void netdev_class_remove_file(struct class_attribute *class_attr)
+{
+	netdev_class_remove_file_ns(class_attr, NULL);
+}
 
 extern struct kobj_ns_type_operations net_ns_type_operations;
 
diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h
index f3c7c24..fbfdb9d 100644
--- a/include/linux/netpoll.h
+++ b/include/linux/netpoll.h
@@ -24,7 +24,8 @@
 	struct net_device *dev;
 	char dev_name[IFNAMSIZ];
 	const char *name;
-	void (*rx_hook)(struct netpoll *, int, char *, int);
+	void (*rx_skb_hook)(struct netpoll *np, int source, struct sk_buff *skb,
+			    int offset, int len);
 
 	union inet_addr local_ip, remote_ip;
 	bool ipv6;
@@ -41,7 +42,7 @@
 	unsigned long rx_flags;
 	spinlock_t rx_lock;
 	struct semaphore dev_lock;
-	struct list_head rx_np; /* netpolls that registered an rx_hook */
+	struct list_head rx_np; /* netpolls that registered an rx_skb_hook */
 
 	struct sk_buff_head neigh_tx; /* list of neigh requests to reply to */
 	struct sk_buff_head txq;
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index e36dee5..c6f41b6 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -395,7 +395,9 @@
 #define FATTR4_WORD1_FS_LAYOUT_TYPES    (1UL << 30)
 #define FATTR4_WORD2_LAYOUT_BLKSIZE     (1UL << 1)
 #define FATTR4_WORD2_MDSTHRESHOLD       (1UL << 4)
-#define FATTR4_WORD2_SECURITY_LABEL     (1UL << 17)
+#define FATTR4_WORD2_SECURITY_LABEL     (1UL << 16)
+#define FATTR4_WORD2_CHANGE_SECURITY_LABEL \
+					(1UL << 17)
 
 /* MDS threshold bitmap bits */
 #define THRESHOLD_RD                    (1UL << 0)
@@ -460,6 +462,7 @@
 	NFSPROC4_CLNT_FS_LOCATIONS,
 	NFSPROC4_CLNT_RELEASE_LOCKOWNER,
 	NFSPROC4_CLNT_SECINFO,
+	NFSPROC4_CLNT_FSID_PRESENT,
 
 	/* nfs41 */
 	NFSPROC4_CLNT_EXCHANGE_ID,
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 3ea4cde..14a4820 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -269,9 +269,13 @@
 	return test_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
 }
 
-static inline int NFS_FSCACHE(const struct inode *inode)
+static inline struct fscache_cookie *nfs_i_fscache(struct inode *inode)
 {
-	return test_bit(NFS_INO_FSCACHE, &NFS_I(inode)->flags);
+#ifdef CONFIG_NFS_FSCACHE
+	return NFS_I(inode)->fscache;
+#else
+	return NULL;
+#endif
 }
 
 static inline __u64 NFS_FILEID(const struct inode *inode)
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index b8cedce..1150ea4 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -41,6 +41,7 @@
 #define NFS_CS_DISCRTRY		1		/* - disconnect on RPC retry */
 #define NFS_CS_MIGRATION	2		/* - transparent state migr */
 #define NFS_CS_INFINITE_SLOTS	3		/* - don't limit TCP slots */
+#define NFS_CS_NO_RETRANS_TIMEOUT	4	/* - Disable retransmit timeouts */
 	struct sockaddr_storage	cl_addr;	/* server identifier */
 	size_t			cl_addrlen;
 	char *			cl_hostname;	/* hostname of server */
@@ -78,6 +79,7 @@
 	char			cl_ipaddr[48];
 	u32			cl_cb_ident;	/* v4.0 callback identifier */
 	const struct nfs4_minor_version_ops *cl_mvops;
+	unsigned long		cl_mig_gen;
 
 	/* NFSv4.0 transport blocking */
 	struct nfs4_slot_table	*cl_slot_tbl;
@@ -147,7 +149,9 @@
 	__u64			maxfilesize;	/* maximum file size */
 	struct timespec		time_delta;	/* smallest time granularity */
 	unsigned long		mount_time;	/* when this fs was mounted */
+	struct super_block	*super;		/* VFS super block */
 	dev_t			s_dev;		/* superblock dev numbers */
+	struct nfs_auth_info	auth_info;	/* parsed auth flavors */
 
 #ifdef CONFIG_NFS_FSCACHE
 	struct nfs_fscache_key	*fscache_key;	/* unique key for superblock */
@@ -187,6 +191,12 @@
 	struct list_head	state_owners_lru;
 	struct list_head	layouts;
 	struct list_head	delegations;
+
+	unsigned long		mig_gen;
+	unsigned long		mig_status;
+#define NFS_MIG_IN_TRANSITION		(1)
+#define NFS_MIG_FAILED			(2)
+
 	void (*destroy)(struct nfs_server *);
 
 	atomic_t active; /* Keep trace of any activity to this server */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 49f52c8..3ccfcec 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -591,6 +591,13 @@
 	struct nfs_fattr		*new_fattr;
 };
 
+/* parsed sec= options */
+#define NFS_AUTH_INFO_MAX_FLAVORS 12 /* see fs/nfs/super.c */
+struct nfs_auth_info {
+	unsigned int            flavor_len;
+	rpc_authflavor_t        flavors[NFS_AUTH_INFO_MAX_FLAVORS];
+};
+
 /*
  * Argument struct for decode_entry function
  */
@@ -1053,14 +1060,18 @@
 struct nfs4_fs_locations_arg {
 	struct nfs4_sequence_args	seq_args;
 	const struct nfs_fh *dir_fh;
+	const struct nfs_fh *fh;
 	const struct qstr *name;
 	struct page *page;
 	const u32 *bitmask;
+	clientid4 clientid;
+	unsigned char migration:1, renew:1;
 };
 
 struct nfs4_fs_locations_res {
 	struct nfs4_sequence_res	seq_res;
 	struct nfs4_fs_locations       *fs_locations;
+	unsigned char			migration:1, renew:1;
 };
 
 struct nfs4_secinfo4 {
@@ -1084,6 +1095,19 @@
 	struct nfs4_secinfo_flavors	*flavors;
 };
 
+struct nfs4_fsid_present_arg {
+	struct nfs4_sequence_args	seq_args;
+	const struct nfs_fh		*fh;
+	clientid4			clientid;
+	unsigned char			renew:1;
+};
+
+struct nfs4_fsid_present_res {
+	struct nfs4_sequence_res	seq_res;
+	struct nfs_fh			*fh;
+	unsigned char			renew:1;
+};
+
 #endif /* CONFIG_NFS_V4 */
 
 struct nfstime4 {
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index c8ba627..2e069d1 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -584,6 +584,10 @@
 	struct perf_regs_user		regs_user;
 	u64				stack_user_size;
 	u64				weight;
+	/*
+	 * Transaction flags for abort events:
+	 */
+	u64				txn;
 };
 
 static inline void perf_sample_data_init(struct perf_sample_data *data,
@@ -599,6 +603,7 @@
 	data->stack_user_size = 0;
 	data->weight = 0;
 	data->data_src.val = 0;
+	data->txn = 0;
 }
 
 extern void perf_output_sample(struct perf_output_handle *handle,
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
new file mode 100644
index 0000000..6d72269
--- /dev/null
+++ b/include/linux/phy/phy.h
@@ -0,0 +1,270 @@
+/*
+ * phy.h -- generic phy header file
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DRIVERS_PHY_H
+#define __DRIVERS_PHY_H
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+
+struct phy;
+
+/**
+ * struct phy_ops - set of function pointers for performing phy operations
+ * @init: operation to be performed for initializing phy
+ * @exit: operation to be performed while exiting
+ * @power_on: powering on the phy
+ * @power_off: powering off the phy
+ * @owner: the module owner containing the ops
+ */
+struct phy_ops {
+	int	(*init)(struct phy *phy);
+	int	(*exit)(struct phy *phy);
+	int	(*power_on)(struct phy *phy);
+	int	(*power_off)(struct phy *phy);
+	struct module *owner;
+};
+
+/**
+ * struct phy - represents the phy device
+ * @dev: phy device
+ * @id: id of the phy device
+ * @ops: function pointers for performing phy operations
+ * @init_data: list of PHY consumers (non-dt only)
+ * @mutex: mutex to protect phy_ops
+ * @init_count: used to protect when the PHY is used by multiple consumers
+ * @power_count: used to protect when the PHY is used by multiple consumers
+ */
+struct phy {
+	struct device		dev;
+	int			id;
+	const struct phy_ops	*ops;
+	struct phy_init_data	*init_data;
+	struct mutex		mutex;
+	int			init_count;
+	int			power_count;
+};
+
+/**
+ * struct phy_provider - represents the phy provider
+ * @dev: phy provider device
+ * @owner: the module owner having of_xlate
+ * @of_xlate: function pointer to obtain phy instance from phy pointer
+ * @list: to maintain a linked list of PHY providers
+ */
+struct phy_provider {
+	struct device		*dev;
+	struct module		*owner;
+	struct list_head	list;
+	struct phy * (*of_xlate)(struct device *dev,
+		struct of_phandle_args *args);
+};
+
+/**
+ * struct phy_consumer - represents the phy consumer
+ * @dev_name: the device name of the controller that will use this PHY device
+ * @port: name given to the consumer port
+ */
+struct phy_consumer {
+	const char *dev_name;
+	const char *port;
+};
+
+/**
+ * struct phy_init_data - contains the list of PHY consumers
+ * @num_consumers: number of consumers for this PHY device
+ * @consumers: list of PHY consumers
+ */
+struct phy_init_data {
+	unsigned int num_consumers;
+	struct phy_consumer *consumers;
+};
+
+#define PHY_CONSUMER(_dev_name, _port)				\
+{								\
+	.dev_name	= _dev_name,				\
+	.port		= _port,				\
+}
+
+#define	to_phy(dev)	(container_of((dev), struct phy, dev))
+
+#define	of_phy_provider_register(dev, xlate)	\
+	__of_phy_provider_register((dev), THIS_MODULE, (xlate))
+
+#define	devm_of_phy_provider_register(dev, xlate)	\
+	__devm_of_phy_provider_register((dev), THIS_MODULE, (xlate))
+
+static inline void phy_set_drvdata(struct phy *phy, void *data)
+{
+	dev_set_drvdata(&phy->dev, data);
+}
+
+static inline void *phy_get_drvdata(struct phy *phy)
+{
+	return dev_get_drvdata(&phy->dev);
+}
+
+#if IS_ENABLED(CONFIG_GENERIC_PHY)
+int phy_pm_runtime_get(struct phy *phy);
+int phy_pm_runtime_get_sync(struct phy *phy);
+int phy_pm_runtime_put(struct phy *phy);
+int phy_pm_runtime_put_sync(struct phy *phy);
+void phy_pm_runtime_allow(struct phy *phy);
+void phy_pm_runtime_forbid(struct phy *phy);
+int phy_init(struct phy *phy);
+int phy_exit(struct phy *phy);
+int phy_power_on(struct phy *phy);
+int phy_power_off(struct phy *phy);
+struct phy *phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_get(struct device *dev, const char *string);
+void phy_put(struct phy *phy);
+void devm_phy_put(struct device *dev, struct phy *phy);
+struct phy *of_phy_simple_xlate(struct device *dev,
+	struct of_phandle_args *args);
+struct phy *phy_create(struct device *dev, const struct phy_ops *ops,
+	struct phy_init_data *init_data);
+struct phy *devm_phy_create(struct device *dev,
+	const struct phy_ops *ops, struct phy_init_data *init_data);
+void phy_destroy(struct phy *phy);
+void devm_phy_destroy(struct device *dev, struct phy *phy);
+struct phy_provider *__of_phy_provider_register(struct device *dev,
+	struct module *owner, struct phy * (*of_xlate)(struct device *dev,
+	struct of_phandle_args *args));
+struct phy_provider *__devm_of_phy_provider_register(struct device *dev,
+	struct module *owner, struct phy * (*of_xlate)(struct device *dev,
+	struct of_phandle_args *args));
+void of_phy_provider_unregister(struct phy_provider *phy_provider);
+void devm_of_phy_provider_unregister(struct device *dev,
+	struct phy_provider *phy_provider);
+#else
+static inline int phy_pm_runtime_get(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline int phy_pm_runtime_get_sync(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline int phy_pm_runtime_put(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline int phy_pm_runtime_put_sync(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline void phy_pm_runtime_allow(struct phy *phy)
+{
+	return;
+}
+
+static inline void phy_pm_runtime_forbid(struct phy *phy)
+{
+	return;
+}
+
+static inline int phy_init(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline int phy_exit(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline int phy_power_on(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline int phy_power_off(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline struct phy *phy_get(struct device *dev, const char *string)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_get(struct device *dev, const char *string)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void phy_put(struct phy *phy)
+{
+}
+
+static inline void devm_phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy *of_phy_simple_xlate(struct device *dev,
+	struct of_phandle_args *args)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *phy_create(struct device *dev,
+	const struct phy_ops *ops, struct phy_init_data *init_data)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_create(struct device *dev,
+	const struct phy_ops *ops, struct phy_init_data *init_data)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void phy_destroy(struct phy *phy)
+{
+}
+
+static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy_provider *__of_phy_provider_register(
+	struct device *dev, struct module *owner, struct phy * (*of_xlate)(
+	struct device *dev, struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy_provider *__devm_of_phy_provider_register(struct device
+	*dev, struct module *owner, struct phy * (*of_xlate)(struct device *dev,
+	struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
+{
+}
+
+static inline void devm_of_phy_provider_unregister(struct device *dev,
+	struct phy_provider *phy_provider)
+{
+}
+#endif
+
+#endif /* __DRIVERS_PHY_H */
diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h
deleted file mode 100644
index 5713c87..0000000
--- a/include/linux/platform_data/clk-nomadik.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* Minimal platform data header */
-void nomadik_clk_init(void);
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
index 9d98f3a..97baf83 100644
--- a/include/linux/platform_data/clk-ux500.h
+++ b/include/linux/platform_data/clk-ux500.h
@@ -10,6 +10,9 @@
 #ifndef __CLK_UX500_H
 #define __CLK_UX500_H
 
+void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		       u32 clkrst5_base, u32 clkrst6_base);
+
 void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
 		    u32 clkrst5_base, u32 clkrst6_base);
 void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h
new file mode 100644
index 0000000..89ba1b0
--- /dev/null
+++ b/include/linux/platform_data/dma-s3c24xx.h
@@ -0,0 +1,46 @@
+/*
+ * S3C24XX DMA handling
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/* Helper to encode the source selection constraints for early s3c socs. */
+#define S3C24XX_DMA_CHANREQ(src, chan)	((BIT(3) | src) << chan * 4)
+
+enum s3c24xx_dma_bus {
+	S3C24XX_DMA_APB,
+	S3C24XX_DMA_AHB,
+};
+
+/**
+ * @bus: on which bus does the peripheral reside - AHB or APB.
+ * @handshake: is a handshake with the peripheral necessary
+ * @chansel: channel selection information, depending on variant; reqsel for
+ *	     s3c2443 and later and channel-selection map for earlier SoCs
+ *	     see CHANSEL doc in s3c2443-dma.c
+ */
+struct s3c24xx_dma_channel {
+	enum s3c24xx_dma_bus bus;
+	bool handshake;
+	u16 chansel;
+};
+
+/**
+ * struct s3c24xx_dma_platdata - platform specific settings
+ * @num_phy_channels: number of physical channels
+ * @channels: array of virtual channel descriptions
+ * @num_channels: number of virtual channels
+ */
+struct s3c24xx_dma_platdata {
+	int num_phy_channels;
+	struct s3c24xx_dma_channel *channels;
+	int num_channels;
+};
+
+struct dma_chan;
+bool s3c24xx_dma_filter(struct dma_chan *chan, void *param);
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
new file mode 100644
index 0000000..6efd202
--- /dev/null
+++ b/include/linux/platform_data/gpio-davinci.h
@@ -0,0 +1,60 @@
+/*
+ * DaVinci GPIO Platform Related Defines
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DAVINCI_GPIO_PLATFORM_H
+#define __DAVINCI_GPIO_PLATFORM_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+enum davinci_gpio_type {
+	GPIO_TYPE_TNETV107X = 0,
+};
+
+struct davinci_gpio_platform_data {
+	u32	ngpio;
+	u32	gpio_unbanked;
+	u32	intc_irq_num;
+};
+
+
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	int			irq_base;
+	/* Serialize access to GPIO registers */
+	spinlock_t		lock;
+	void __iomem		*regs;
+	void __iomem		*set_data;
+	void __iomem		*clr_data;
+	void __iomem		*in_data;
+	int			gpio_unbanked;
+	unsigned		gpio_irq;
+};
+
+/*
+ * basic gpio routines
+ */
+#define	GPIO(X)		(X)	/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+#endif
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index bf34e17..c2fd902 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -25,13 +25,4 @@
 	u8 hs_settle;
 };
 
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @id:     MIPI-CSIS harware instance index (0...1)
- * @on:     true to enable D-PHY and deassert its reset
- *          false to disable D-PHY
- * @return: 0 on success, or negative error code on failure
- */
-int s5p_csis_phy_enable(int id, bool on);
-
 #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/include/linux/platform_data/pinctrl-single.h b/include/linux/platform_data/pinctrl-single.h
new file mode 100644
index 0000000..72eacda
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-single.h
@@ -0,0 +1,12 @@
+/**
+ * irq:		optional wake-up interrupt
+ * rearm:	optional soc specific rearm function
+ *
+ * Note that the irq and rearm setup should come from device
+ * tree except for omap where there are still some dependencies
+ * to the legacy PRM code.
+ */
+struct pcs_pdata {
+	int irq;
+	void (*rearm)(void);
+};
diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h
deleted file mode 100644
index 5f28cae..0000000
--- a/include/linux/platform_data/usb-ehci-s5p.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/include/linux/platform_data/usb-ohci-exynos.h b/include/linux/platform_data/usb-ohci-exynos.h
deleted file mode 100644
index c256c59..0000000
--- a/include/linux/platform_data/usb-ohci-exynos.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h
new file mode 100644
index 0000000..dd3ba46
--- /dev/null
+++ b/include/linux/platform_data/usb-rcar-gen2-phy.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __USB_RCAR_GEN2_PHY_H
+#define __USB_RCAR_GEN2_PHY_H
+
+#include <linux/types.h>
+
+struct rcar_gen2_phy_platform_data {
+	/* USB channel 0 configuration */
+	bool chan0_pci:1;	/* true: PCI USB host 0, false: USBHS */
+	/* USB channel 2 configuration */
+	bool chan2_pci:1;	/* true: PCI USB host 2, false: USBSS */
+};
+
+#endif
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index ce8e4ff..16f6654 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -178,6 +178,7 @@
 	int (*resume)(struct platform_device *);
 	struct device_driver driver;
 	const struct platform_device_id *id_table;
+	bool prevent_deferred_probe;
 };
 
 #define to_platform_driver(drv)	(container_of((drv), struct platform_driver, \
diff --git a/include/linux/printk.h b/include/linux/printk.h
index e6131a78..6949258 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -233,6 +233,8 @@
 	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
 #endif
 
+#include <linux/dynamic_debug.h>
+
 /* If you are writing a driver, please use dev_dbg instead */
 #if defined(CONFIG_DYNAMIC_DEBUG)
 /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
@@ -343,7 +345,19 @@
 #endif
 
 /* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
+/* descriptor check is first to prevent flooding with "callbacks suppressed" */
+#define pr_debug_ratelimited(fmt, ...)					\
+do {									\
+	static DEFINE_RATELIMIT_STATE(_rs,				\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);		\
+	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);			\
+	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) &&	\
+	    __ratelimit(&_rs))						\
+		__dynamic_pr_debug(&descriptor, fmt, ##__VA_ARGS__);	\
+} while (0)
+#elif defined(DEBUG)
 #define pr_debug_ratelimited(fmt, ...)					\
 	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
 #else
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index 4106721..45a0a9e 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -19,6 +19,21 @@
  */
 
 /*
+ * INIT_LIST_HEAD_RCU - Initialize a list_head visible to RCU readers
+ * @list: list to be initialized
+ *
+ * You should instead use INIT_LIST_HEAD() for normal initialization and
+ * cleanup tasks, when readers have no access to the list being initialized.
+ * However, if the list being initialized is visible to readers, you
+ * need to keep the compiler from being too mischievous.
+ */
+static inline void INIT_LIST_HEAD_RCU(struct list_head *list)
+{
+	ACCESS_ONCE(list->next) = list;
+	ACCESS_ONCE(list->prev) = list;
+}
+
+/*
  * return the ->next pointer of a list_head in an rcu safe
  * way, we must not access it directly
  */
@@ -191,9 +206,13 @@
 	if (list_empty(list))
 		return;
 
-	/* "first" and "last" tracking list, so initialize it. */
+	/*
+	 * "first" and "last" tracking list, so initialize it.  RCU readers
+	 * have access to this list, so we must use INIT_LIST_HEAD_RCU()
+	 * instead of INIT_LIST_HEAD().
+	 */
 
-	INIT_LIST_HEAD(list);
+	INIT_LIST_HEAD_RCU(list);
 
 	/*
 	 * At this point, the list body still points to the source list.
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index f1f1bc3..39cbb88 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -261,6 +261,10 @@
 		rcu_irq_exit(); \
 	} while (0)
 
+#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP)
+extern bool __rcu_is_watching(void);
+#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP) */
+
 /*
  * Infrastructure to implement the synchronize_() primitives in
  * TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
@@ -297,10 +301,6 @@
 }
 #endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
 
-#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP)
-extern int rcu_is_cpu_idle(void);
-#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP) */
-
 #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU)
 bool rcu_lockdep_current_cpu_online(void);
 #else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
@@ -351,7 +351,7 @@
 {
 	if (!debug_lockdep_rcu_enabled())
 		return 1;
-	if (rcu_is_cpu_idle())
+	if (!rcu_is_watching())
 		return 0;
 	if (!rcu_lockdep_current_cpu_online())
 		return 0;
@@ -402,7 +402,7 @@
 
 	if (!debug_lockdep_rcu_enabled())
 		return 1;
-	if (rcu_is_cpu_idle())
+	if (!rcu_is_watching())
 		return 0;
 	if (!rcu_lockdep_current_cpu_online())
 		return 0;
@@ -771,7 +771,7 @@
 	__rcu_read_lock();
 	__acquire(RCU);
 	rcu_lock_acquire(&rcu_lock_map);
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+	rcu_lockdep_assert(rcu_is_watching(),
 			   "rcu_read_lock() used illegally while idle");
 }
 
@@ -792,7 +792,7 @@
  */
 static inline void rcu_read_unlock(void)
 {
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+	rcu_lockdep_assert(rcu_is_watching(),
 			   "rcu_read_unlock() used illegally while idle");
 	rcu_lock_release(&rcu_lock_map);
 	__release(RCU);
@@ -821,7 +821,7 @@
 	local_bh_disable();
 	__acquire(RCU_BH);
 	rcu_lock_acquire(&rcu_bh_lock_map);
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+	rcu_lockdep_assert(rcu_is_watching(),
 			   "rcu_read_lock_bh() used illegally while idle");
 }
 
@@ -832,7 +832,7 @@
  */
 static inline void rcu_read_unlock_bh(void)
 {
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+	rcu_lockdep_assert(rcu_is_watching(),
 			   "rcu_read_unlock_bh() used illegally while idle");
 	rcu_lock_release(&rcu_bh_lock_map);
 	__release(RCU_BH);
@@ -857,7 +857,7 @@
 	preempt_disable();
 	__acquire(RCU_SCHED);
 	rcu_lock_acquire(&rcu_sched_lock_map);
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+	rcu_lockdep_assert(rcu_is_watching(),
 			   "rcu_read_lock_sched() used illegally while idle");
 }
 
@@ -875,7 +875,7 @@
  */
 static inline void rcu_read_unlock_sched(void)
 {
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+	rcu_lockdep_assert(rcu_is_watching(),
 			   "rcu_read_unlock_sched() used illegally while idle");
 	rcu_lock_release(&rcu_sched_lock_map);
 	__release(RCU_SCHED);
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index e31005e..09ebcbe 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -132,4 +132,21 @@
 }
 #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
+#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE)
+
+static inline bool rcu_is_watching(void)
+{
+	return __rcu_is_watching();
+}
+
+#else /* defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
+
+static inline bool rcu_is_watching(void)
+{
+	return true;
+}
+
+
+#endif /* #else defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
+
 #endif /* __LINUX_RCUTINY_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 226169d..4b9c815 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -90,4 +90,6 @@
 extern void rcu_scheduler_starting(void);
 extern int rcu_scheduler_active __read_mostly;
 
+extern bool rcu_is_watching(void);
+
 #endif /* __LINUX_RCUTREE_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index b98291a..f729be9 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -66,7 +66,6 @@
 	void		(*set_ldisc)(struct uart_port *, int new);
 	void		(*pm)(struct uart_port *, unsigned int state,
 			      unsigned int oldstate);
-	int		(*set_wake)(struct uart_port *, unsigned int state);
 
 	/*
 	 * Return a string describing the type of the port
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 6740801..8af2804 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -49,6 +49,7 @@
 
 	unsigned int		cl_softrtry : 1,/* soft timeouts */
 				cl_discrtry : 1,/* disconnect before retry */
+				cl_noretranstimeo: 1,/* No retransmit timeouts */
 				cl_autobind : 1,/* use getport() */
 				cl_chatty   : 1;/* be verbose */
 
@@ -126,6 +127,7 @@
 #define RPC_CLNT_CREATE_QUIET		(1UL << 6)
 #define RPC_CLNT_CREATE_INFINITE_SLOTS	(1UL << 7)
 #define RPC_CLNT_CREATE_NO_IDLE_TIMEOUT	(1UL << 8)
+#define RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT	(1UL << 9)
 
 struct rpc_clnt *rpc_create(struct rpc_create_args *args);
 struct rpc_clnt	*rpc_bind_new_program(struct rpc_clnt *,
@@ -134,6 +136,10 @@
 struct rpc_clnt *rpc_clone_client(struct rpc_clnt *);
 struct rpc_clnt *rpc_clone_client_set_auth(struct rpc_clnt *,
 				rpc_authflavor_t);
+int		rpc_switch_client_transport(struct rpc_clnt *,
+				struct xprt_create *,
+				const struct rpc_timeout *);
+
 void		rpc_shutdown_client(struct rpc_clnt *);
 void		rpc_release_client(struct rpc_clnt *);
 void		rpc_task_release_client(struct rpc_task *);
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 096ee58..3a847de 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -122,6 +122,7 @@
 #define RPC_TASK_SENT		0x0800		/* message was sent */
 #define RPC_TASK_TIMEOUT	0x1000		/* fail with ETIMEDOUT on timeout */
 #define RPC_TASK_NOCONNECT	0x2000		/* return ENOTCONN if not connected */
+#define RPC_TASK_NO_RETRANS_TIMEOUT	0x4000		/* wait forever for a reply */
 
 #define RPC_IS_ASYNC(t)		((t)->tk_flags & RPC_TASK_ASYNC)
 #define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index cec7b9b..8097b9d 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -288,7 +288,7 @@
 int			xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
 void			xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
 void			xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
-int			xprt_prepare_transmit(struct rpc_task *task);
+bool			xprt_prepare_transmit(struct rpc_task *task);
 void			xprt_transmit(struct rpc_task *task);
 void			xprt_end_transmit(struct rpc_task *task);
 int			xprt_adjust_timeout(struct rpc_rqst *req);
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 11baec7..6695040 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -173,7 +173,6 @@
 struct sysfs_ops {
 	ssize_t	(*show)(struct kobject *, struct attribute *, char *);
 	ssize_t	(*store)(struct kobject *, struct attribute *, const char *, size_t);
-	const void *(*namespace)(struct kobject *, const struct attribute *);
 };
 
 struct sysfs_dirent;
@@ -183,19 +182,23 @@
 int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
 			    void *data, struct module *owner);
 
-int __must_check sysfs_create_dir(struct kobject *kobj);
+int __must_check sysfs_create_dir_ns(struct kobject *kobj, const void *ns);
 void sysfs_remove_dir(struct kobject *kobj);
-int __must_check sysfs_rename_dir(struct kobject *kobj, const char *new_name);
-int __must_check sysfs_move_dir(struct kobject *kobj,
-				struct kobject *new_parent_kobj);
+int __must_check sysfs_rename_dir_ns(struct kobject *kobj, const char *new_name,
+				     const void *new_ns);
+int __must_check sysfs_move_dir_ns(struct kobject *kobj,
+				   struct kobject *new_parent_kobj,
+				   const void *new_ns);
 
-int __must_check sysfs_create_file(struct kobject *kobj,
-				   const struct attribute *attr);
+int __must_check sysfs_create_file_ns(struct kobject *kobj,
+				      const struct attribute *attr,
+				      const void *ns);
 int __must_check sysfs_create_files(struct kobject *kobj,
 				   const struct attribute **attr);
 int __must_check sysfs_chmod_file(struct kobject *kobj,
 				  const struct attribute *attr, umode_t mode);
-void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr);
+void sysfs_remove_file_ns(struct kobject *kobj, const struct attribute *attr,
+			  const void *ns);
 void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr);
 
 int __must_check sysfs_create_bin_file(struct kobject *kobj,
@@ -210,8 +213,9 @@
 					  const char *name);
 void sysfs_remove_link(struct kobject *kobj, const char *name);
 
-int sysfs_rename_link(struct kobject *kobj, struct kobject *target,
-			const char *old_name, const char *new_name);
+int sysfs_rename_link_ns(struct kobject *kobj, struct kobject *target,
+			 const char *old_name, const char *new_name,
+			 const void *new_ns);
 
 void sysfs_delete_link(struct kobject *dir, struct kobject *targ,
 			const char *name);
@@ -241,9 +245,9 @@
 
 void sysfs_notify(struct kobject *kobj, const char *dir, const char *attr);
 void sysfs_notify_dirent(struct sysfs_dirent *sd);
-struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
-				      const void *ns,
-				      const unsigned char *name);
+struct sysfs_dirent *sysfs_get_dirent_ns(struct sysfs_dirent *parent_sd,
+					 const unsigned char *name,
+					 const void *ns);
 struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd);
 void sysfs_put(struct sysfs_dirent *sd);
 
@@ -257,7 +261,7 @@
 	return -ENOSYS;
 }
 
-static inline int sysfs_create_dir(struct kobject *kobj)
+static inline int sysfs_create_dir_ns(struct kobject *kobj, const void *ns)
 {
 	return 0;
 }
@@ -266,19 +270,22 @@
 {
 }
 
-static inline int sysfs_rename_dir(struct kobject *kobj, const char *new_name)
+static inline int sysfs_rename_dir_ns(struct kobject *kobj,
+				      const char *new_name, const void *new_ns)
 {
 	return 0;
 }
 
-static inline int sysfs_move_dir(struct kobject *kobj,
-				 struct kobject *new_parent_kobj)
+static inline int sysfs_move_dir_ns(struct kobject *kobj,
+				    struct kobject *new_parent_kobj,
+				    const void *new_ns)
 {
 	return 0;
 }
 
-static inline int sysfs_create_file(struct kobject *kobj,
-				    const struct attribute *attr)
+static inline int sysfs_create_file_ns(struct kobject *kobj,
+				       const struct attribute *attr,
+				       const void *ns)
 {
 	return 0;
 }
@@ -295,8 +302,9 @@
 	return 0;
 }
 
-static inline void sysfs_remove_file(struct kobject *kobj,
-				     const struct attribute *attr)
+static inline void sysfs_remove_file_ns(struct kobject *kobj,
+					const struct attribute *attr,
+					const void *ns)
 {
 }
 
@@ -333,8 +341,9 @@
 {
 }
 
-static inline int sysfs_rename_link(struct kobject *k, struct kobject *t,
-				    const char *old_name, const char *new_name)
+static inline int sysfs_rename_link_ns(struct kobject *k, struct kobject *t,
+				       const char *old_name,
+				       const char *new_name, const void *ns)
 {
 	return 0;
 }
@@ -413,10 +422,9 @@
 static inline void sysfs_notify_dirent(struct sysfs_dirent *sd)
 {
 }
-static inline
-struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
-				      const void *ns,
-				      const unsigned char *name)
+static inline struct sysfs_dirent *
+sysfs_get_dirent_ns(struct sysfs_dirent *parent_sd, const unsigned char *name,
+		    const void *ns)
 {
 	return NULL;
 }
@@ -435,4 +443,28 @@
 
 #endif /* CONFIG_SYSFS */
 
+static inline int __must_check sysfs_create_file(struct kobject *kobj,
+						 const struct attribute *attr)
+{
+	return sysfs_create_file_ns(kobj, attr, NULL);
+}
+
+static inline void sysfs_remove_file(struct kobject *kobj,
+				     const struct attribute *attr)
+{
+	return sysfs_remove_file_ns(kobj, attr, NULL);
+}
+
+static inline int sysfs_rename_link(struct kobject *kobj, struct kobject *target,
+				    const char *old_name, const char *new_name)
+{
+	return sysfs_rename_link_ns(kobj, target, old_name, new_name, NULL);
+}
+
+static inline struct sysfs_dirent *
+sysfs_get_dirent(struct sysfs_dirent *parent_sd, const unsigned char *name)
+{
+	return sysfs_get_dirent_ns(parent_sd, name, NULL);
+}
+
 #endif /* _SYSFS_H_ */
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 7faf933..387fa7d 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -17,9 +17,6 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 
-/* Enable/disable SYSRQ support by default (0==no, 1==yes). */
-#define SYSRQ_DEFAULT_ENABLE	1
-
 /* Possible values of bitmask for enabling sysrq functions */
 /* 0x0001 is reserved for enable everything */
 #define SYSRQ_ENABLE_LOG	0x0002
diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h
index 55c29a8..c98cfa4 100644
--- a/include/linux/tegra-powergate.h
+++ b/include/linux/tegra-powergate.h
@@ -34,8 +34,15 @@
 #define TEGRA_POWERGATE_CPU3	11
 #define TEGRA_POWERGATE_CELP	12
 #define TEGRA_POWERGATE_3D1	13
+#define TEGRA_POWERGATE_CPU0	14
+#define TEGRA_POWERGATE_C0NC	15
+#define TEGRA_POWERGATE_C1NC	16
+#define TEGRA_POWERGATE_DIS	18
+#define TEGRA_POWERGATE_DISB	19
+#define TEGRA_POWERGATE_XUSBA	20
+#define TEGRA_POWERGATE_XUSBB	21
+#define TEGRA_POWERGATE_XUSBC	22
 
-#define TEGRA_POWERGATE_CPU0	TEGRA_POWERGATE_CPU
 #define TEGRA_POWERGATE_3D0	TEGRA_POWERGATE_3D
 
 int tegra_powergate_is_powered(int id);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 633cac7..97d660e 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -180,7 +180,6 @@
 	   IFF the port was initialized. Do not use to free resources. Called
 	   under the port mutex to serialize against activate/shutdowns */
 	void (*shutdown)(struct tty_port *port);
-	void (*drop)(struct tty_port *port);
 	/* Called under the port mutex from tty_port_open, serialized using
 	   the port mutex */
         /* FIXME: long term getting the tty argument *out* of this would be
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index 06f28be..319eae7 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -30,6 +30,7 @@
 struct vm_area_struct;
 struct mm_struct;
 struct inode;
+struct notifier_block;
 
 #ifdef CONFIG_ARCH_SUPPORTS_UPROBES
 # include <asm/uprobes.h>
@@ -108,6 +109,7 @@
 extern int __weak set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
 extern bool __weak is_swbp_insn(uprobe_opcode_t *insn);
 extern bool __weak is_trap_insn(uprobe_opcode_t *insn);
+extern int uprobe_write_opcode(struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t);
 extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
 extern int uprobe_apply(struct inode *inode, loff_t offset, struct uprobe_consumer *uc, bool);
 extern void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
@@ -117,14 +119,21 @@
 extern void uprobe_end_dup_mmap(void);
 extern void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm);
 extern void uprobe_free_utask(struct task_struct *t);
-extern void uprobe_copy_process(struct task_struct *t);
+extern void uprobe_copy_process(struct task_struct *t, unsigned long flags);
 extern unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs);
 extern int uprobe_post_sstep_notifier(struct pt_regs *regs);
 extern int uprobe_pre_sstep_notifier(struct pt_regs *regs);
 extern void uprobe_notify_resume(struct pt_regs *regs);
 extern bool uprobe_deny_signal(void);
-extern bool __weak arch_uprobe_skip_sstep(struct arch_uprobe *aup, struct pt_regs *regs);
+extern bool arch_uprobe_skip_sstep(struct arch_uprobe *aup, struct pt_regs *regs);
 extern void uprobe_clear_state(struct mm_struct *mm);
+extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
+extern int  arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern int  arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
+extern int  arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
+extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
 #else /* !CONFIG_UPROBES */
 struct uprobes_state {
 };
@@ -174,7 +183,7 @@
 static inline void uprobe_free_utask(struct task_struct *t)
 {
 }
-static inline void uprobe_copy_process(struct task_struct *t)
+static inline void uprobe_copy_process(struct task_struct *t, unsigned long flags)
 {
 }
 static inline void uprobe_clear_state(struct mm_struct *mm)
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 001629c..7454865 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -475,7 +475,8 @@
  * @lpm_capable: device supports LPM
  * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM
  * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM
- * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled
+ * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled
+ * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled
  * @usb3_lpm_enabled: USB3 hardware LPM enabled
  * @string_langid: language ID for strings
  * @product: iProduct string, if present (static)
@@ -548,6 +549,7 @@
 	unsigned usb2_hw_lpm_capable:1;
 	unsigned usb2_hw_lpm_besl_capable:1;
 	unsigned usb2_hw_lpm_enabled:1;
+	unsigned usb2_hw_lpm_allowed:1;
 	unsigned usb3_lpm_enabled:1;
 	int string_langid;
 
@@ -702,7 +704,7 @@
 		unsigned int num_streams, gfp_t mem_flags);
 
 /* Reverts a group of bulk endpoints back to not using stream IDs. */
-extern void usb_free_streams(struct usb_interface *interface,
+extern int usb_free_streams(struct usb_interface *interface,
 		struct usb_host_endpoint **eps, unsigned int num_eps,
 		gfp_t mem_flags);
 
@@ -1209,11 +1211,13 @@
 	struct list_head urb_list;
 	wait_queue_head_t wait;
 	spinlock_t lock;
+	atomic_t suspend_wakeups;
 	unsigned int poisoned:1;
 };
 
 static inline void init_usb_anchor(struct usb_anchor *anchor)
 {
+	memset(anchor, 0, sizeof(*anchor));
 	INIT_LIST_HEAD(&anchor->urb_list);
 	init_waitqueue_head(&anchor->wait);
 	spin_lock_init(&anchor->lock);
@@ -1574,6 +1578,8 @@
 extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_anchor_suspend_wakeups(struct usb_anchor *anchor);
+extern void usb_anchor_resume_wakeups(struct usb_anchor *anchor);
 extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
 extern void usb_unanchor_urb(struct urb *urb);
 extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 75efc45..b8aba19 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -73,6 +73,7 @@
 	spinlock_t lock;
 	struct list_head  head;
 	struct tasklet_struct bh;
+	struct usb_host_endpoint *completing_ep;
 };
 
 struct usb_hcd {
@@ -140,6 +141,7 @@
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
+	unsigned		amd_resume_bug:1; /* AMD remote wakeup quirk */
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */
@@ -378,6 +380,12 @@
 	return hcd->driver->flags & HCD_BH;
 }
 
+static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	return hcd->high_prio_bh.completing_ep == ep;
+}
+
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
 		int status);
@@ -428,6 +436,8 @@
 extern void usb_hcd_pci_remove(struct pci_dev *dev);
 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
 
+extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
+
 #ifdef CONFIG_PM
 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
 #endif
@@ -496,6 +506,7 @@
 	struct usb_device	*hub;	/* upstream highspeed hub */
 	int			multi;	/* true means one TT per port */
 	unsigned		think_time;	/* think time in ns */
+	void			*hcpriv;	/* HCD private data */
 
 	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
 	spinlock_t		lock;
@@ -554,9 +565,8 @@
 		 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
 		/* bytecount = data payload byte count */
 
-#define NS_TO_US(ns)	((ns + 500L) / 1000L)
-			/* convert & round nanoseconds to microseconds */
-
+#define NS_TO_US(ns)	DIV_ROUND_UP(ns, 1000L)
+			/* convert nanoseconds to microseconds, rounding up */
 
 /*
  * Full/low speed bandwidth allocation constants/support.
diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h
deleted file mode 100644
index 756cf55..0000000
--- a/include/linux/usb/intel_mid_otg.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Intel MID (Langwell/Penwell) USB OTG Transceiver driver
- * Copyright (C) 2008 - 2010, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __INTEL_MID_OTG_H
-#define __INTEL_MID_OTG_H
-
-#include <linux/pm.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-
-struct intel_mid_otg_xceiv;
-
-/* This is a common data structure for Intel MID platform to
- * save values of the OTG state machine */
-struct otg_hsm {
-	/* Input */
-	int a_bus_resume;
-	int a_bus_suspend;
-	int a_conn;
-	int a_sess_vld;
-	int a_srp_det;
-	int a_vbus_vld;
-	int b_bus_resume;
-	int b_bus_suspend;
-	int b_conn;
-	int b_se0_srp;
-	int b_ssend_srp;
-	int b_sess_end;
-	int b_sess_vld;
-	int id;
-/* id values */
-#define ID_B		0x05
-#define ID_A		0x04
-#define ID_ACA_C	0x03
-#define ID_ACA_B	0x02
-#define ID_ACA_A	0x01
-	int power_up;
-	int adp_change;
-	int test_device;
-
-	/* Internal variables */
-	int a_set_b_hnp_en;
-	int b_srp_done;
-	int b_hnp_enable;
-	int hnp_poll_enable;
-
-	/* Timeout indicator for timers */
-	int a_wait_vrise_tmout;
-	int a_wait_bcon_tmout;
-	int a_aidl_bdis_tmout;
-	int a_bidl_adis_tmout;
-	int a_bidl_adis_tmr;
-	int a_wait_vfall_tmout;
-	int b_ase0_brst_tmout;
-	int b_bus_suspend_tmout;
-	int b_srp_init_tmout;
-	int b_srp_fail_tmout;
-	int b_srp_fail_tmr;
-	int b_adp_sense_tmout;
-
-	/* Informative variables */
-	int a_bus_drop;
-	int a_bus_req;
-	int a_clr_err;
-	int b_bus_req;
-	int a_suspend_req;
-	int b_bus_suspend_vld;
-
-	/* Output */
-	int drv_vbus;
-	int loc_conn;
-	int loc_sof;
-
-	/* Others */
-	int vbus_srp_up;
-};
-
-/* must provide ULPI access function to read/write registers implemented in
- * ULPI address space */
-struct iotg_ulpi_access_ops {
-	int	(*read)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 *val);
-	int	(*write)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 val);
-};
-
-#define OTG_A_DEVICE	0x0
-#define OTG_B_DEVICE	0x1
-
-/*
- * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
- * with device and host drivers to implement the USB OTG related feature. More
- * function members are added based on usb_phy data structure for this
- * purpose.
- */
-struct intel_mid_otg_xceiv {
-	struct usb_phy		otg;
-	struct otg_hsm		hsm;
-
-	/* base address */
-	void __iomem		*base;
-
-	/* ops to access ulpi */
-	struct iotg_ulpi_access_ops	ulpi_ops;
-
-	/* atomic notifier for interrupt context */
-	struct atomic_notifier_head	iotg_notifier;
-
-	/* start/stop USB Host function */
-	int	(*start_host)(struct intel_mid_otg_xceiv *iotg);
-	int	(*stop_host)(struct intel_mid_otg_xceiv *iotg);
-
-	/* start/stop USB Peripheral function */
-	int	(*start_peripheral)(struct intel_mid_otg_xceiv *iotg);
-	int	(*stop_peripheral)(struct intel_mid_otg_xceiv *iotg);
-
-	/* start/stop ADP sense/probe function */
-	int	(*set_adp_probe)(struct intel_mid_otg_xceiv *iotg,
-					bool enabled, int dev);
-	int	(*set_adp_sense)(struct intel_mid_otg_xceiv *iotg,
-					bool enabled);
-
-#ifdef CONFIG_PM
-	/* suspend/resume USB host function */
-	int	(*suspend_host)(struct intel_mid_otg_xceiv *iotg,
-					pm_message_t message);
-	int	(*resume_host)(struct intel_mid_otg_xceiv *iotg);
-
-	int	(*suspend_peripheral)(struct intel_mid_otg_xceiv *iotg,
-					pm_message_t message);
-	int	(*resume_peripheral)(struct intel_mid_otg_xceiv *iotg);
-#endif
-
-};
-static inline
-struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct usb_phy *otg)
-{
-	return container_of(otg, struct intel_mid_otg_xceiv, otg);
-}
-
-#define MID_OTG_NOTIFY_CONNECT		0x0001
-#define MID_OTG_NOTIFY_DISCONN		0x0002
-#define MID_OTG_NOTIFY_HSUSPEND		0x0003
-#define MID_OTG_NOTIFY_HRESUME		0x0004
-#define MID_OTG_NOTIFY_CSUSPEND		0x0005
-#define MID_OTG_NOTIFY_CRESUME		0x0006
-#define MID_OTG_NOTIFY_HOSTADD		0x0007
-#define MID_OTG_NOTIFY_HOSTREMOVE	0x0008
-#define MID_OTG_NOTIFY_CLIENTADD	0x0009
-#define MID_OTG_NOTIFY_CLIENTREMOVE	0x000a
-
-static inline int
-intel_mid_otg_register_notifier(struct intel_mid_otg_xceiv *iotg,
-				struct notifier_block *nb)
-{
-	return atomic_notifier_chain_register(&iotg->iotg_notifier, nb);
-}
-
-static inline void
-intel_mid_otg_unregister_notifier(struct intel_mid_otg_xceiv *iotg,
-				struct notifier_block *nb)
-{
-	atomic_notifier_chain_unregister(&iotg->iotg_notifier, nb);
-}
-
-#endif /* __INTEL_MID_OTG_H */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 053c268..eb50525 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,8 +99,6 @@
 	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
 	u8		mode;
 
-	u8		has_mailbox:1;
-
 	/* for clk_get() */
 	const char	*clock;
 
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index 27b5b8c..596b019 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -19,20 +19,23 @@
 #ifndef __OMAP_CONTROL_USB_H__
 #define __OMAP_CONTROL_USB_H__
 
+enum omap_control_usb_type {
+	OMAP_CTRL_TYPE_OTGHS = 1,	/* Mailbox OTGHS_CONTROL */
+	OMAP_CTRL_TYPE_USB2,	/* USB2_PHY, power down in CONTROL_DEV_CONF */
+	OMAP_CTRL_TYPE_PIPE3,	/* PIPE3 PHY, DPLL & seperate Rx/Tx power */
+	OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+};
+
 struct omap_control_usb {
 	struct device *dev;
 
-	u32 __iomem *dev_conf;
 	u32 __iomem *otghs_control;
-	u32 __iomem *phy_power;
+	u32 __iomem *power;
+	u32 __iomem *power_aux;
 
 	struct clk *sys_clk;
 
-	u32 type;
-};
-
-struct omap_control_usb_platform_data {
-	u8 type;
+	enum omap_control_usb_type type;
 };
 
 enum omap_control_usb_mode {
@@ -42,10 +45,6 @@
 	USB_MODE_DISCONNECT,
 };
 
-/* To differentiate ctrl module IP having either mailbox or USB3 PHY power */
-#define	OMAP_CTRL_DEV_TYPE1		0x1
-#define	OMAP_CTRL_DEV_TYPE2		0x2
-
 #define	OMAP_CTRL_DEV_PHY_PD		BIT(0)
 
 #define	OMAP_CTRL_DEV_AVALID		BIT(0)
@@ -63,26 +62,18 @@
 #define	OMAP_CTRL_USB3_PHY_TX_RX_POWERON	0x3
 #define	OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF	0x0
 
+#define OMAP_CTRL_USB2_PHY_PD		BIT(28)
+
 #if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
-extern struct device *omap_get_control_dev(void);
 extern void omap_control_usb_phy_power(struct device *dev, int on);
-extern void omap_control_usb3_phy_power(struct device *dev, bool on);
 extern void omap_control_usb_set_mode(struct device *dev,
 	enum omap_control_usb_mode mode);
 #else
-static inline struct device *omap_get_control_dev(void)
-{
-	return ERR_PTR(-ENODEV);
-}
 
 static inline void omap_control_usb_phy_power(struct device *dev, int on)
 {
 }
 
-static inline void omap_control_usb3_phy_power(struct device *dev, int on)
-{
-}
-
 static inline void omap_control_usb_set_mode(struct device *dev,
 	enum omap_control_usb_mode mode)
 {
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index d528b80..704a1ab 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -320,6 +320,8 @@
 extern void usb_serial_put(struct usb_serial *serial);
 extern int usb_serial_generic_open(struct tty_struct *tty,
 	struct usb_serial_port *port);
+extern int usb_serial_generic_write_start(struct usb_serial_port *port,
+							gfp_t mem_flags);
 extern int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 extern void usb_serial_generic_close(struct usb_serial_port *port);
diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h
index 11d85b9..cc8d818 100644
--- a/include/linux/usb/usb_phy_gen_xceiv.h
+++ b/include/linux/usb/usb_phy_gen_xceiv.h
@@ -9,7 +9,8 @@
 
 	/* if set fails with -EPROBE_DEFER if can't get regulator */
 	unsigned int needs_vcc:1;
-	unsigned int needs_reset:1;
+	unsigned int needs_reset:1;	/* deprecated */
+	int gpio_reset;
 };
 
 #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h
index 4ff744e..c125713 100644
--- a/include/linux/usb/wusb-wa.h
+++ b/include/linux/usb/wusb-wa.h
@@ -142,7 +142,7 @@
 struct wa_notif_hdr {
 	u8 bLength;
 	u8 bNotifyType;			/* enum wa_notif_type */
-} __attribute__((packed));
+} __packed;
 
 /**
  * HWA DN Received notification [(WUSB] section 8.5.4.2)
@@ -158,7 +158,7 @@
 	u8 bSourceDeviceAddr;		/* from errata 2005/07 */
 	u8 bmAttributes;
 	struct wusb_dn_hdr dndata[];
-} __attribute__((packed));
+} __packed;
 
 /* [WUSB] section 8.3.3 */
 enum wa_xfer_type {
@@ -167,6 +167,8 @@
 	WA_XFER_TYPE_ISO = 0x82,
 	WA_XFER_RESULT = 0x83,
 	WA_XFER_ABORT = 0x84,
+	WA_XFER_ISO_PACKET_INFO = 0xA0,
+	WA_XFER_ISO_PACKET_STATUS = 0xA1,
 };
 
 /* [WUSB] section 8.3.3 */
@@ -177,28 +179,47 @@
 	__le32 dwTransferID;		/* Host-assigned ID */
 	__le32 dwTransferLength;	/* Length of data to xfer */
 	u8 bTransferSegment;
-} __attribute__((packed));
+} __packed;
 
 struct wa_xfer_ctl {
 	struct wa_xfer_hdr hdr;
 	u8 bmAttribute;
 	__le16 wReserved;
 	struct usb_ctrlrequest baSetupData;
-} __attribute__((packed));
+} __packed;
 
 struct wa_xfer_bi {
 	struct wa_xfer_hdr hdr;
 	u8 bReserved;
 	__le16 wReserved;
-} __attribute__((packed));
+} __packed;
 
+/* [WUSB] section 8.5.5 */
 struct wa_xfer_hwaiso {
 	struct wa_xfer_hdr hdr;
 	u8 bReserved;
 	__le16 wPresentationTime;
 	__le32 dwNumOfPackets;
-	/* FIXME: u8 pktdata[]? */
-} __attribute__((packed));
+} __packed;
+
+struct wa_xfer_packet_info_hwaiso {
+	__le16 wLength;
+	u8 bPacketType;
+	u8 bReserved;
+	__le16 PacketLength[0];
+} __packed;
+
+struct wa_xfer_packet_status_len_hwaiso {
+	__le16 PacketLength;
+	__le16 PacketStatus;
+} __packed;
+
+struct wa_xfer_packet_status_hwaiso {
+	__le16 wLength;
+	u8 bPacketType;
+	u8 bReserved;
+	struct wa_xfer_packet_status_len_hwaiso PacketStatus[0];
+} __packed;
 
 /* [WUSB] section 8.3.3.5 */
 struct wa_xfer_abort {
@@ -206,7 +227,7 @@
 	u8 bRequestType;
 	__le16 wRPipe;			/* RPipe index */
 	__le32 dwTransferID;		/* Host-assigned ID */
-} __attribute__((packed));
+} __packed;
 
 /**
  * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
@@ -216,7 +237,7 @@
 	struct wa_notif_hdr hdr;
 	u8 bEndpoint;
 	u8 Reserved;
-} __attribute__((packed));
+} __packed;
 
 /** Transfer result basic codes [WUSB] table 8-15 */
 enum {
@@ -243,7 +264,7 @@
 	u8     bTransferSegment;
 	u8     bTransferStatus;
 	__le32 dwNumOfPackets;
-} __attribute__((packed));
+} __packed;
 
 /**
  * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
@@ -258,16 +279,16 @@
 struct usb_wa_descriptor {
 	u8	bLength;
 	u8	bDescriptorType;
-	u16	bcdWAVersion;
+	__le16	bcdWAVersion;
 	u8	bNumPorts;		/* don't use!! */
 	u8	bmAttributes;		/* Reserved == 0 */
-	u16	wNumRPipes;
-	u16	wRPipeMaxBlock;
+	__le16	wNumRPipes;
+	__le16	wRPipeMaxBlock;
 	u8	bRPipeBlockSize;
 	u8	bPwrOn2PwrGood;
 	u8	bNumMMCIEs;
 	u8	DeviceRemovable;	/* FIXME: in DWA this is up to 16 bytes */
-} __attribute__((packed));
+} __packed;
 
 /**
  * HWA Device Information Buffer (WUSB1.0[T8.54])
@@ -277,6 +298,6 @@
 	u8	bDeviceAddress;
 	__le16	wPHYRates;
 	u8	bmDeviceAttribute;
-} __attribute__((packed));
+} __packed;
 
 #endif /* #ifndef __LINUX_USB_WUSB_WA_H */
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 48ec25a..5e661a9 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -165,6 +165,7 @@
 static inline void rt6_clean_expires(struct rt6_info *rt)
 {
 	rt->rt6i_flags &= ~RTF_EXPIRES;
+	rt->dst.expires = 0;
 }
 
 static inline void rt6_set_expires(struct rt6_info *rt, unsigned long expires)
diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h
index ee2376c..aca3822 100644
--- a/include/trace/events/rcu.h
+++ b/include/trace/events/rcu.h
@@ -39,15 +39,26 @@
 #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
 
 /*
- * Tracepoint for grace-period events: starting and ending a grace
- * period ("start" and "end", respectively), a CPU noting the start
- * of a new grace period or the end of an old grace period ("cpustart"
- * and "cpuend", respectively), a CPU passing through a quiescent
- * state ("cpuqs"), a CPU coming online or going offline ("cpuonl"
- * and "cpuofl", respectively), a CPU being kicked for being too
- * long in dyntick-idle mode ("kick"), a CPU accelerating its new
- * callbacks to RCU_NEXT_READY_TAIL ("AccReadyCB"), and a CPU
- * accelerating its new callbacks to RCU_WAIT_TAIL ("AccWaitCB").
+ * Tracepoint for grace-period events.  Takes a string identifying the
+ * RCU flavor, the grace-period number, and a string identifying the
+ * grace-period-related event as follows:
+ *
+ *	"AccReadyCB": CPU acclerates new callbacks to RCU_NEXT_READY_TAIL.
+ *	"AccWaitCB": CPU accelerates new callbacks to RCU_WAIT_TAIL.
+ *	"newreq": Request a new grace period.
+ *	"start": Start a grace period.
+ *	"cpustart": CPU first notices a grace-period start.
+ *	"cpuqs": CPU passes through a quiescent state.
+ *	"cpuonl": CPU comes online.
+ *	"cpuofl": CPU goes offline.
+ *	"reqwait": GP kthread sleeps waiting for grace-period request.
+ *	"reqwaitsig": GP kthread awakened by signal from reqwait state.
+ *	"fqswait": GP kthread waiting until time to force quiescent states.
+ *	"fqsstart": GP kthread starts forcing quiescent states.
+ *	"fqsend": GP kthread done forcing quiescent states.
+ *	"fqswaitsig": GP kthread awakened by signal from fqswait state.
+ *	"end": End a grace period.
+ *	"cpuend": CPU first notices a grace-period end.
  */
 TRACE_EVENT(rcu_grace_period,
 
@@ -161,6 +172,46 @@
 );
 
 /*
+ * Tracepoint for RCU no-CBs CPU callback handoffs.  This event is intended
+ * to assist debugging of these handoffs.
+ *
+ * The first argument is the name of the RCU flavor, and the second is
+ * the number of the offloaded CPU are extracted.  The third and final
+ * argument is a string as follows:
+ *
+ *	"WakeEmpty": Wake rcuo kthread, first CB to empty list.
+ *	"WakeOvf": Wake rcuo kthread, CB list is huge.
+ *	"WakeNot": Don't wake rcuo kthread.
+ *	"WakeNotPoll": Don't wake rcuo kthread because it is polling.
+ *	"Poll": Start of new polling cycle for rcu_nocb_poll.
+ *	"Sleep": Sleep waiting for CBs for !rcu_nocb_poll.
+ *	"WokeEmpty": rcuo kthread woke to find empty list.
+ *	"WokeNonEmpty": rcuo kthread woke to find non-empty list.
+ *	"WaitQueue": Enqueue partially done, timed wait for it to complete.
+ *	"WokeQueue": Partial enqueue now complete.
+ */
+TRACE_EVENT(rcu_nocb_wake,
+
+	TP_PROTO(const char *rcuname, int cpu, const char *reason),
+
+	TP_ARGS(rcuname, cpu, reason),
+
+	TP_STRUCT__entry(
+		__field(const char *, rcuname)
+		__field(int, cpu)
+		__field(const char *, reason)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->cpu = cpu;
+		__entry->reason = reason;
+	),
+
+	TP_printk("%s %d %s", __entry->rcuname, __entry->cpu, __entry->reason)
+);
+
+/*
  * Tracepoint for tasks blocking within preemptible-RCU read-side
  * critical sections.  Track the type of RCU (which one day might
  * include SRCU), the grace-period number that the task is blocking
@@ -540,17 +591,17 @@
 TRACE_EVENT(rcu_batch_end,
 
 	TP_PROTO(const char *rcuname, int callbacks_invoked,
-		 bool cb, bool nr, bool iit, bool risk),
+		 char cb, char nr, char iit, char risk),
 
 	TP_ARGS(rcuname, callbacks_invoked, cb, nr, iit, risk),
 
 	TP_STRUCT__entry(
 		__field(const char *, rcuname)
 		__field(int, callbacks_invoked)
-		__field(bool, cb)
-		__field(bool, nr)
-		__field(bool, iit)
-		__field(bool, risk)
+		__field(char, cb)
+		__field(char, nr)
+		__field(char, iit)
+		__field(char, risk)
 	),
 
 	TP_fast_assign(
@@ -656,6 +707,7 @@
 #define trace_rcu_future_grace_period(rcuname, gpnum, completed, c, \
 				      level, grplo, grphi, event) \
 				      do { } while (0)
+#define trace_rcu_nocb_wake(rcuname, cpu, reason) do { } while (0)
 #define trace_rcu_preempt_task(rcuname, pid, gpnum) do { } while (0)
 #define trace_rcu_unlock_preempted_task(rcuname, gpnum, pid) do { } while (0)
 #define trace_rcu_quiescent_state_report(rcuname, gpnum, mask, qsmask, level, \
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 115add2..33d2b8f 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -241,6 +241,8 @@
 header-y += mei.h
 header-y += mempolicy.h
 header-y += meye.h
+header-y += mic_common.h
+header-y += mic_ioctl.h
 header-y += mii.h
 header-y += minix_fs.h
 header-y += mman.h
diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h
new file mode 100644
index 0000000..17e7d95
--- /dev/null
+++ b/include/uapi/linux/mic_common.h
@@ -0,0 +1,240 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC driver.
+ *
+ */
+#ifndef __MIC_COMMON_H_
+#define __MIC_COMMON_H_
+
+#include <linux/virtio_ring.h>
+
+#ifndef __KERNEL__
+#define ALIGN(a, x)	(((a) + (x) - 1) & ~((x) - 1))
+#define __aligned(x)	__attribute__ ((aligned(x)))
+#endif
+
+#define mic_aligned_size(x) ALIGN(sizeof(x), 8)
+
+/**
+ * struct mic_device_desc: Virtio device information shared between the
+ * virtio driver and userspace backend
+ *
+ * @type: Device type: console/network/disk etc.  Type 0/-1 terminates.
+ * @num_vq: Number of virtqueues.
+ * @feature_len: Number of bytes of feature bits.  Multiply by 2: one for
+   host features and one for guest acknowledgements.
+ * @config_len: Number of bytes of the config array after virtqueues.
+ * @status: A status byte, written by the Guest.
+ * @config: Start of the following variable length config.
+ */
+struct mic_device_desc {
+	__s8 type;
+	__u8 num_vq;
+	__u8 feature_len;
+	__u8 config_len;
+	__u8 status;
+	__u64 config[0];
+} __aligned(8);
+
+/**
+ * struct mic_device_ctrl: Per virtio device information in the device page
+ * used internally by the host and card side drivers.
+ *
+ * @vdev: Used for storing MIC vdev information by the guest.
+ * @config_change: Set to 1 by host when a config change is requested.
+ * @vdev_reset: Set to 1 by guest to indicate virtio device has been reset.
+ * @guest_ack: Set to 1 by guest to ack a command.
+ * @host_ack: Set to 1 by host to ack a command.
+ * @used_address_updated: Set to 1 by guest when the used address should be
+ * updated.
+ * @c2h_vdev_db: The doorbell number to be used by guest. Set by host.
+ * @h2c_vdev_db: The doorbell number to be used by host. Set by guest.
+ */
+struct mic_device_ctrl {
+	__u64 vdev;
+	__u8 config_change;
+	__u8 vdev_reset;
+	__u8 guest_ack;
+	__u8 host_ack;
+	__u8 used_address_updated;
+	__s8 c2h_vdev_db;
+	__s8 h2c_vdev_db;
+} __aligned(8);
+
+/**
+ * struct mic_bootparam: Virtio device independent information in device page
+ *
+ * @magic: A magic value used by the card to ensure it can see the host
+ * @c2h_shutdown_db: Card to Host shutdown doorbell set by host
+ * @h2c_shutdown_db: Host to Card shutdown doorbell set by card
+ * @h2c_config_db: Host to Card Virtio config doorbell set by card
+ * @shutdown_status: Card shutdown status set by card
+ * @shutdown_card: Set to 1 by the host when a card shutdown is initiated
+ */
+struct mic_bootparam {
+	__u32 magic;
+	__s8 c2h_shutdown_db;
+	__s8 h2c_shutdown_db;
+	__s8 h2c_config_db;
+	__u8 shutdown_status;
+	__u8 shutdown_card;
+} __aligned(8);
+
+/**
+ * struct mic_device_page: High level representation of the device page
+ *
+ * @bootparam: The bootparam structure is used for sharing information and
+ * status updates between MIC host and card drivers.
+ * @desc: Array of MIC virtio device descriptors.
+ */
+struct mic_device_page {
+	struct mic_bootparam bootparam;
+	struct mic_device_desc desc[0];
+};
+/**
+ * struct mic_vqconfig: This is how we expect the device configuration field
+ * for a virtqueue to be laid out in config space.
+ *
+ * @address: Guest/MIC physical address of the virtio ring
+ * (avail and desc rings)
+ * @used_address: Guest/MIC physical address of the used ring
+ * @num: The number of entries in the virtio_ring
+ */
+struct mic_vqconfig {
+	__u64 address;
+	__u64 used_address;
+	__u16 num;
+} __aligned(8);
+
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * This is pagesize for historical reasons.
+ */
+#define MIC_VIRTIO_RING_ALIGN		4096
+
+#define MIC_MAX_VRINGS			4
+#define MIC_VRING_ENTRIES		128
+
+/*
+ * Max vring entries (power of 2) to ensure desc and avail rings
+ * fit in a single page
+ */
+#define MIC_MAX_VRING_ENTRIES		128
+
+/**
+ * Max size of the desc block in bytes: includes:
+ *	- struct mic_device_desc
+ *	- struct mic_vqconfig (num_vq of these)
+ *	- host and guest features
+ *	- virtio device config space
+ */
+#define MIC_MAX_DESC_BLK_SIZE		256
+
+/**
+ * struct _mic_vring_info - Host vring info exposed to userspace backend
+ * for the avail index and magic for the card.
+ *
+ * @avail_idx: host avail idx
+ * @magic: A magic debug cookie.
+ */
+struct _mic_vring_info {
+	__u16 avail_idx;
+	int magic;
+};
+
+/**
+ * struct mic_vring - Vring information.
+ *
+ * @vr: The virtio ring.
+ * @info: Host vring information exposed to the userspace backend for the
+ * avail index and magic for the card.
+ * @va: The va for the buffer allocated for vr and info.
+ * @len: The length of the buffer required for allocating vr and info.
+ */
+struct mic_vring {
+	struct vring vr;
+	struct _mic_vring_info *info;
+	void *va;
+	int len;
+};
+
+#define mic_aligned_desc_size(d) ALIGN(mic_desc_size(d), 8)
+
+#ifndef INTEL_MIC_CARD
+static inline unsigned mic_desc_size(const struct mic_device_desc *desc)
+{
+	return mic_aligned_size(*desc)
+		+ desc->num_vq * mic_aligned_size(struct mic_vqconfig)
+		+ desc->feature_len * 2
+		+ desc->config_len;
+}
+
+static inline struct mic_vqconfig *
+mic_vq_config(const struct mic_device_desc *desc)
+{
+	return (struct mic_vqconfig *)(desc + 1);
+}
+
+static inline __u8 *mic_vq_features(const struct mic_device_desc *desc)
+{
+	return (__u8 *)(mic_vq_config(desc) + desc->num_vq);
+}
+
+static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc)
+{
+	return mic_vq_features(desc) + desc->feature_len * 2;
+}
+static inline unsigned mic_total_desc_size(struct mic_device_desc *desc)
+{
+	return mic_aligned_desc_size(desc) +
+		mic_aligned_size(struct mic_device_ctrl);
+}
+#endif
+
+/* Device page size */
+#define MIC_DP_SIZE 4096
+
+#define MIC_MAGIC 0xc0ffee00
+
+/**
+ * enum mic_states - MIC states.
+ */
+enum mic_states {
+	MIC_OFFLINE = 0,
+	MIC_ONLINE,
+	MIC_SHUTTING_DOWN,
+	MIC_RESET_FAILED,
+	MIC_SUSPENDING,
+	MIC_SUSPENDED,
+	MIC_LAST
+};
+
+/**
+ * enum mic_status - MIC status reported by card after
+ * a host or card initiated shutdown or a card crash.
+ */
+enum mic_status {
+	MIC_NOP = 0,
+	MIC_CRASHED,
+	MIC_HALTED,
+	MIC_POWER_OFF,
+	MIC_RESTART,
+	MIC_STATUS_LAST
+};
+
+#endif
diff --git a/include/uapi/linux/mic_ioctl.h b/include/uapi/linux/mic_ioctl.h
new file mode 100644
index 0000000..7fabba5
--- /dev/null
+++ b/include/uapi/linux/mic_ioctl.h
@@ -0,0 +1,76 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#ifndef _MIC_IOCTL_H_
+#define _MIC_IOCTL_H_
+
+#include <linux/types.h>
+
+/*
+ * mic_copy - MIC virtio descriptor copy.
+ *
+ * @iov: An array of IOVEC structures containing user space buffers.
+ * @iovcnt: Number of IOVEC structures in iov.
+ * @vr_idx: The vring index.
+ * @update_used: A non zero value results in used index being updated.
+ * @out_len: The aggregate of the total length written to or read from
+ *	the virtio device.
+ */
+struct mic_copy_desc {
+#ifdef __KERNEL__
+	struct iovec __user *iov;
+#else
+	struct iovec *iov;
+#endif
+	int iovcnt;
+	__u8 vr_idx;
+	__u8 update_used;
+	__u32 out_len;
+};
+
+/*
+ * Add a new virtio device
+ * The (struct mic_device_desc *) pointer points to a device page entry
+ *	for the virtio device consisting of:
+ *	- struct mic_device_desc
+ *	- struct mic_vqconfig (num_vq of these)
+ *	- host and guest features
+ *	- virtio device config space
+ * The total size referenced by the pointer should equal the size returned
+ * by desc_size() in mic_common.h
+ */
+#define MIC_VIRTIO_ADD_DEVICE _IOWR('s', 1, struct mic_device_desc *)
+
+/*
+ * Copy the number of entries in the iovec and update the used index
+ * if requested by the user.
+ */
+#define MIC_VIRTIO_COPY_DESC	_IOWR('s', 2, struct mic_copy_desc *)
+
+/*
+ * Notify virtio device of a config change
+ * The (__u8 *) pointer points to config space values for the device
+ * as they should be written into the device page. The total size
+ * referenced by the pointer should equal the config_len field of struct
+ * mic_device_desc.
+ */
+#define MIC_VIRTIO_CONFIG_CHANGE _IOWR('s', 5, __u8 *)
+
+#endif
diff --git a/include/uapi/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h
index 576bddd..64b0f22 100644
--- a/include/uapi/linux/nfs_mount.h
+++ b/include/uapi/linux/nfs_mount.h
@@ -60,7 +60,7 @@
 #define NFS_MOUNT_BROKEN_SUID	0x0400	/* 4 */
 #define NFS_MOUNT_NOACL		0x0800	/* 4 */
 #define NFS_MOUNT_STRICTLOCK	0x1000	/* reserved for NFSv4 */
-#define NFS_MOUNT_SECFLAVOUR	0x2000	/* 5 */
+#define NFS_MOUNT_SECFLAVOUR	0x2000	/* 5 non-text parsed mount data only */
 #define NFS_MOUNT_NORDIRPLUS	0x4000	/* 5 */
 #define NFS_MOUNT_UNSHARED	0x8000	/* 5 */
 #define NFS_MOUNT_FLAGMASK	0xFFFF
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 009a655..e1802d6 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -136,8 +136,9 @@
 	PERF_SAMPLE_WEIGHT			= 1U << 14,
 	PERF_SAMPLE_DATA_SRC			= 1U << 15,
 	PERF_SAMPLE_IDENTIFIER			= 1U << 16,
+	PERF_SAMPLE_TRANSACTION			= 1U << 17,
 
-	PERF_SAMPLE_MAX = 1U << 17,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 18,		/* non-ABI */
 };
 
 /*
@@ -181,6 +182,28 @@
 };
 
 /*
+ * Values for the memory transaction event qualifier, mostly for
+ * abort events. Multiple bits can be set.
+ */
+enum {
+	PERF_TXN_ELISION        = (1 << 0), /* From elision */
+	PERF_TXN_TRANSACTION    = (1 << 1), /* From transaction */
+	PERF_TXN_SYNC           = (1 << 2), /* Instruction is related */
+	PERF_TXN_ASYNC          = (1 << 3), /* Instruction not related */
+	PERF_TXN_RETRY          = (1 << 4), /* Retry possible */
+	PERF_TXN_CONFLICT       = (1 << 5), /* Conflict abort */
+	PERF_TXN_CAPACITY_WRITE = (1 << 6), /* Capacity write abort */
+	PERF_TXN_CAPACITY_READ  = (1 << 7), /* Capacity read abort */
+
+	PERF_TXN_MAX	        = (1 << 8), /* non-ABI */
+
+	/* bits 32..63 are reserved for the abort code */
+
+	PERF_TXN_ABORT_MASK  = (0xffffffffULL << 32),
+	PERF_TXN_ABORT_SHIFT = 32,
+};
+
+/*
  * The format of the data returned by read() on a perf event fd,
  * as specified by attr.read_format:
  *
@@ -456,13 +479,15 @@
 	/*
 	 * Control data for the mmap() data buffer.
 	 *
-	 * User-space reading the @data_head value should issue an rmb(), on
-	 * SMP capable platforms, after reading this value -- see
-	 * perf_event_wakeup().
+	 * User-space reading the @data_head value should issue an smp_rmb(),
+	 * after reading this value.
 	 *
 	 * When the mapping is PROT_WRITE the @data_tail value should be
-	 * written by userspace to reflect the last read data. In this case
-	 * the kernel will not over-write unread data.
+	 * written by userspace to reflect the last read data, after issueing
+	 * an smp_mb() to separate the data read from the ->data_tail store.
+	 * In this case the kernel will not over-write unread data.
+	 *
+	 * See perf_output_put_handle() for the data ordering.
 	 */
 	__u64   data_head;		/* head in the data section */
 	__u64	data_tail;		/* user-space written tail */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
deleted file mode 100644
index bd8cabd..0000000
--- a/include/video/exynos_dp.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Samsung SoC DP device support
- *
- * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _EXYNOS_DP_H
-#define _EXYNOS_DP_H
-
-#define DP_TIMEOUT_LOOP_COUNT 100
-#define MAX_CR_LOOP 5
-#define MAX_EQ_LOOP 5
-
-enum link_rate_type {
-	LINK_RATE_1_62GBPS = 0x06,
-	LINK_RATE_2_70GBPS = 0x0a
-};
-
-enum link_lane_count_type {
-	LANE_COUNT1 = 1,
-	LANE_COUNT2 = 2,
-	LANE_COUNT4 = 4
-};
-
-enum link_training_state {
-	START,
-	CLOCK_RECOVERY,
-	EQUALIZER_TRAINING,
-	FINISHED,
-	FAILED
-};
-
-enum voltage_swing_level {
-	VOLTAGE_LEVEL_0,
-	VOLTAGE_LEVEL_1,
-	VOLTAGE_LEVEL_2,
-	VOLTAGE_LEVEL_3,
-};
-
-enum pre_emphasis_level {
-	PRE_EMPHASIS_LEVEL_0,
-	PRE_EMPHASIS_LEVEL_1,
-	PRE_EMPHASIS_LEVEL_2,
-	PRE_EMPHASIS_LEVEL_3,
-};
-
-enum pattern_set {
-	PRBS7,
-	D10_2,
-	TRAINING_PTN1,
-	TRAINING_PTN2,
-	DP_NONE
-};
-
-enum color_space {
-	COLOR_RGB,
-	COLOR_YCBCR422,
-	COLOR_YCBCR444
-};
-
-enum color_depth {
-	COLOR_6,
-	COLOR_8,
-	COLOR_10,
-	COLOR_12
-};
-
-enum color_coefficient {
-	COLOR_YCBCR601,
-	COLOR_YCBCR709
-};
-
-enum dynamic_range {
-	VESA,
-	CEA
-};
-
-enum pll_status {
-	PLL_UNLOCKED,
-	PLL_LOCKED
-};
-
-enum clock_recovery_m_value_type {
-	CALCULATED_M,
-	REGISTER_M
-};
-
-enum video_timing_recognition_type {
-	VIDEO_TIMING_FROM_CAPTURE,
-	VIDEO_TIMING_FROM_REGISTER
-};
-
-enum analog_power_block {
-	AUX_BLOCK,
-	CH0_BLOCK,
-	CH1_BLOCK,
-	CH2_BLOCK,
-	CH3_BLOCK,
-	ANALOG_TOTAL,
-	POWER_ALL
-};
-
-struct video_info {
-	char *name;
-
-	bool h_sync_polarity;
-	bool v_sync_polarity;
-	bool interlaced;
-
-	enum color_space color_space;
-	enum dynamic_range dynamic_range;
-	enum color_coefficient ycbcr_coeff;
-	enum color_depth color_depth;
-
-	enum link_rate_type link_rate;
-	enum link_lane_count_type lane_count;
-};
-
-struct exynos_dp_platdata {
-	struct video_info *video_info;
-
-	void (*phy_init)(void);
-	void (*phy_exit)(void);
-};
-
-#endif /* _EXYNOS_DP_H */
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
index 89dc88a..6a578f8 100644
--- a/include/video/exynos_mipi_dsim.h
+++ b/include/video/exynos_mipi_dsim.h
@@ -216,6 +216,7 @@
  *	automatically.
  * @e_clk_src: select byte clock source.
  * @pd: pointer to MIPI-DSI driver platform data.
+ * @phy: pointer to the MIPI-DSI PHY
  */
 struct mipi_dsim_device {
 	struct device			*dev;
@@ -236,6 +237,7 @@
 	bool				suspended;
 
 	struct mipi_dsim_platform_data	*pd;
+	struct phy			*phy;
 };
 
 /*
@@ -248,7 +250,6 @@
  * @enabled: indicate whether mipi controller got enabled or not.
  * @lcd_panel_info: pointer for lcd panel specific structure.
  *	this structure specifies width, height, timing and polarity and so on.
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
  */
 struct mipi_dsim_platform_data {
 	char				lcd_panel_name[PANEL_NAME_SIZE];
@@ -256,8 +257,6 @@
 	struct mipi_dsim_config		*dsim_config;
 	unsigned int			enabled;
 	void				*lcd_panel_info;
-
-	int (*phy_enable)(struct platform_device *pdev, bool on);
 };
 
 /*
diff --git a/init/Kconfig b/init/Kconfig
index 3ecd8a1..d9887456 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -284,7 +284,7 @@
 
 config AUDITSYSCALL
 	bool "Enable system-call auditing support"
-	depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
+	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
 	default y if SECURITY_SELINUX
 	help
 	  Enable low-overhead system-call auditing infrastructure that
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index 130dfec..b0e99de 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -62,7 +62,7 @@
 	return err;
 }
 
-static int proc_ipc_callback_dointvec(ctl_table *table, int write,
+static int proc_ipc_callback_dointvec_minmax(ctl_table *table, int write,
 	void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table ipc_table;
@@ -72,7 +72,7 @@
 	memcpy(&ipc_table, table, sizeof(ipc_table));
 	ipc_table.data = get_ipc(table);
 
-	rc = proc_dointvec(&ipc_table, write, buffer, lenp, ppos);
+	rc = proc_dointvec_minmax(&ipc_table, write, buffer, lenp, ppos);
 
 	if (write && !rc && lenp_bef == *lenp)
 		/*
@@ -152,15 +152,13 @@
 #define proc_ipc_dointvec	   NULL
 #define proc_ipc_dointvec_minmax   NULL
 #define proc_ipc_dointvec_minmax_orphans   NULL
-#define proc_ipc_callback_dointvec NULL
+#define proc_ipc_callback_dointvec_minmax  NULL
 #define proc_ipcauto_dointvec_minmax NULL
 #endif
 
 static int zero;
 static int one = 1;
-#ifdef CONFIG_CHECKPOINT_RESTORE
 static int int_max = INT_MAX;
-#endif
 
 static struct ctl_table ipc_kern_table[] = {
 	{
@@ -198,21 +196,27 @@
 		.data		= &init_ipc_ns.msg_ctlmax,
 		.maxlen		= sizeof (init_ipc_ns.msg_ctlmax),
 		.mode		= 0644,
-		.proc_handler	= proc_ipc_dointvec,
+		.proc_handler	= proc_ipc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &int_max,
 	},
 	{
 		.procname	= "msgmni",
 		.data		= &init_ipc_ns.msg_ctlmni,
 		.maxlen		= sizeof (init_ipc_ns.msg_ctlmni),
 		.mode		= 0644,
-		.proc_handler	= proc_ipc_callback_dointvec,
+		.proc_handler	= proc_ipc_callback_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &int_max,
 	},
 	{
 		.procname	=  "msgmnb",
 		.data		= &init_ipc_ns.msg_ctlmnb,
 		.maxlen		= sizeof (init_ipc_ns.msg_ctlmnb),
 		.mode		= 0644,
-		.proc_handler	= proc_ipc_dointvec,
+		.proc_handler	= proc_ipc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &int_max,
 	},
 	{
 		.procname	= "sem",
diff --git a/kernel/Makefile b/kernel/Makefile
index b3d51e2..a4d1aa8 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -6,9 +6,9 @@
 	    cpu.o exit.o itimer.o time.o softirq.o resource.o \
 	    sysctl.o sysctl_binary.o capability.o ptrace.o timer.o user.o \
 	    signal.o sys.o kmod.o workqueue.o pid.o task_work.o \
-	    rcupdate.o extable.o params.o posix-timers.o \
+	    extable.o params.o posix-timers.o \
 	    kthread.o sys_ni.o posix-cpu-timers.o mutex.o \
-	    hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
+	    hrtimer.o rwsem.o nsproxy.o semaphore.o \
 	    notifier.o ksysfs.o cred.o reboot.o \
 	    async.o range.o groups.o lglock.o smpboot.o
 
@@ -27,6 +27,7 @@
 obj-y += printk/
 obj-y += cpu/
 obj-y += irq/
+obj-y += rcu/
 
 obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o
 obj-$(CONFIG_FREEZER) += freezer.o
@@ -81,12 +82,6 @@
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
 obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
 obj-$(CONFIG_SECCOMP) += seccomp.o
-obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
-obj-$(CONFIG_TREE_RCU) += rcutree.o
-obj-$(CONFIG_TREE_PREEMPT_RCU) += rcutree.o
-obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o
-obj-$(CONFIG_TINY_RCU) += rcutiny.o
-obj-$(CONFIG_TINY_PREEMPT_RCU) += rcutiny.o
 obj-$(CONFIG_RELAY) += relay.o
 obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
 obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 953c143..8c875ef 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -175,8 +175,8 @@
 static int max_samples_per_tick __read_mostly	= DIV_ROUND_UP(DEFAULT_MAX_SAMPLE_RATE, HZ);
 static int perf_sample_period_ns __read_mostly	= DEFAULT_SAMPLE_PERIOD_NS;
 
-static atomic_t perf_sample_allowed_ns __read_mostly =
-	ATOMIC_INIT( DEFAULT_SAMPLE_PERIOD_NS * DEFAULT_CPU_TIME_MAX_PERCENT / 100);
+static int perf_sample_allowed_ns __read_mostly =
+	DEFAULT_SAMPLE_PERIOD_NS * DEFAULT_CPU_TIME_MAX_PERCENT / 100;
 
 void update_perf_cpu_limits(void)
 {
@@ -184,7 +184,7 @@
 
 	tmp *= sysctl_perf_cpu_time_max_percent;
 	do_div(tmp, 100);
-	atomic_set(&perf_sample_allowed_ns, tmp);
+	ACCESS_ONCE(perf_sample_allowed_ns) = tmp;
 }
 
 static int perf_rotate_context(struct perf_cpu_context *cpuctx);
@@ -193,7 +193,7 @@
 		void __user *buffer, size_t *lenp,
 		loff_t *ppos)
 {
-	int ret = proc_dointvec(table, write, buffer, lenp, ppos);
+	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 
 	if (ret || !write)
 		return ret;
@@ -228,14 +228,15 @@
  * we detect that events are taking too long.
  */
 #define NR_ACCUMULATED_SAMPLES 128
-DEFINE_PER_CPU(u64, running_sample_length);
+static DEFINE_PER_CPU(u64, running_sample_length);
 
 void perf_sample_event_took(u64 sample_len_ns)
 {
 	u64 avg_local_sample_len;
 	u64 local_samples_len;
+	u64 allowed_ns = ACCESS_ONCE(perf_sample_allowed_ns);
 
-	if (atomic_read(&perf_sample_allowed_ns) == 0)
+	if (allowed_ns == 0)
 		return;
 
 	/* decay the counter by 1 average sample */
@@ -251,7 +252,7 @@
 	 */
 	avg_local_sample_len = local_samples_len/NR_ACCUMULATED_SAMPLES;
 
-	if (avg_local_sample_len <= atomic_read(&perf_sample_allowed_ns))
+	if (avg_local_sample_len <= allowed_ns)
 		return;
 
 	if (max_samples_per_tick <= 1)
@@ -262,10 +263,9 @@
 	perf_sample_period_ns = NSEC_PER_SEC / sysctl_perf_event_sample_rate;
 
 	printk_ratelimited(KERN_WARNING
-			"perf samples too long (%lld > %d), lowering "
+			"perf samples too long (%lld > %lld), lowering "
 			"kernel.perf_event_max_sample_rate to %d\n",
-			avg_local_sample_len,
-			atomic_read(&perf_sample_allowed_ns),
+			avg_local_sample_len, allowed_ns,
 			sysctl_perf_event_sample_rate);
 
 	update_perf_cpu_limits();
@@ -899,6 +899,7 @@
 		put_ctx(ctx->parent_ctx);
 		ctx->parent_ctx = NULL;
 	}
+	ctx->generation++;
 }
 
 static u32 perf_event_pid(struct perf_event *event, struct task_struct *p)
@@ -1136,6 +1137,8 @@
 	ctx->nr_events++;
 	if (event->attr.inherit_stat)
 		ctx->nr_stat++;
+
+	ctx->generation++;
 }
 
 /*
@@ -1201,6 +1204,9 @@
 	if (sample_type & PERF_SAMPLE_DATA_SRC)
 		size += sizeof(data->data_src.val);
 
+	if (sample_type & PERF_SAMPLE_TRANSACTION)
+		size += sizeof(data->txn);
+
 	event->header_size = size;
 }
 
@@ -1310,6 +1316,8 @@
 	 */
 	if (event->state > PERF_EVENT_STATE_OFF)
 		event->state = PERF_EVENT_STATE_OFF;
+
+	ctx->generation++;
 }
 
 static void perf_group_detach(struct perf_event *event)
@@ -2146,22 +2154,38 @@
 }
 
 /*
- * Test whether two contexts are equivalent, i.e. whether they
- * have both been cloned from the same version of the same context
- * and they both have the same number of enabled events.
- * If the number of enabled events is the same, then the set
- * of enabled events should be the same, because these are both
- * inherited contexts, therefore we can't access individual events
- * in them directly with an fd; we can only enable/disable all
- * events via prctl, or enable/disable all events in a family
- * via ioctl, which will have the same effect on both contexts.
+ * Test whether two contexts are equivalent, i.e. whether they have both been
+ * cloned from the same version of the same context.
+ *
+ * Equivalence is measured using a generation number in the context that is
+ * incremented on each modification to it; see unclone_ctx(), list_add_event()
+ * and list_del_event().
  */
 static int context_equiv(struct perf_event_context *ctx1,
 			 struct perf_event_context *ctx2)
 {
-	return ctx1->parent_ctx && ctx1->parent_ctx == ctx2->parent_ctx
-		&& ctx1->parent_gen == ctx2->parent_gen
-		&& !ctx1->pin_count && !ctx2->pin_count;
+	/* Pinning disables the swap optimization */
+	if (ctx1->pin_count || ctx2->pin_count)
+		return 0;
+
+	/* If ctx1 is the parent of ctx2 */
+	if (ctx1 == ctx2->parent_ctx && ctx1->generation == ctx2->parent_gen)
+		return 1;
+
+	/* If ctx2 is the parent of ctx1 */
+	if (ctx1->parent_ctx == ctx2 && ctx1->parent_gen == ctx2->generation)
+		return 1;
+
+	/*
+	 * If ctx1 and ctx2 have the same parent; we flatten the parent
+	 * hierarchy, see perf_event_init_context().
+	 */
+	if (ctx1->parent_ctx && ctx1->parent_ctx == ctx2->parent_ctx &&
+			ctx1->parent_gen == ctx2->parent_gen)
+		return 1;
+
+	/* Unmatched */
+	return 0;
 }
 
 static void __perf_event_sync_stat(struct perf_event *event,
@@ -2244,7 +2268,7 @@
 {
 	struct perf_event_context *ctx = task->perf_event_ctxp[ctxn];
 	struct perf_event_context *next_ctx;
-	struct perf_event_context *parent;
+	struct perf_event_context *parent, *next_parent;
 	struct perf_cpu_context *cpuctx;
 	int do_switch = 1;
 
@@ -2256,10 +2280,18 @@
 		return;
 
 	rcu_read_lock();
-	parent = rcu_dereference(ctx->parent_ctx);
 	next_ctx = next->perf_event_ctxp[ctxn];
-	if (parent && next_ctx &&
-	    rcu_dereference(next_ctx->parent_ctx) == parent) {
+	if (!next_ctx)
+		goto unlock;
+
+	parent = rcu_dereference(ctx->parent_ctx);
+	next_parent = rcu_dereference(next_ctx->parent_ctx);
+
+	/* If neither context have a parent context; they cannot be clones. */
+	if (!parent && !next_parent)
+		goto unlock;
+
+	if (next_parent == ctx || next_ctx == parent || next_parent == parent) {
 		/*
 		 * Looks like the two contexts are clones, so we might be
 		 * able to optimize the context switch.  We lock both
@@ -2287,6 +2319,7 @@
 		raw_spin_unlock(&next_ctx->lock);
 		raw_spin_unlock(&ctx->lock);
 	}
+unlock:
 	rcu_read_unlock();
 
 	if (do_switch) {
@@ -4572,6 +4605,9 @@
 	if (sample_type & PERF_SAMPLE_DATA_SRC)
 		perf_output_put(handle, data->data_src.val);
 
+	if (sample_type & PERF_SAMPLE_TRANSACTION)
+		perf_output_put(handle, data->txn);
+
 	if (!event->attr.watermark) {
 		int wakeup_events = event->attr.wakeup_events;
 
@@ -5100,27 +5136,26 @@
 	unsigned int size;
 	char tmp[16];
 	char *buf = NULL;
-	const char *name;
-
-	memset(tmp, 0, sizeof(tmp));
+	char *name;
 
 	if (file) {
 		struct inode *inode;
 		dev_t dev;
+
+		buf = kmalloc(PATH_MAX, GFP_KERNEL);
+		if (!buf) {
+			name = "//enomem";
+			goto cpy_name;
+		}
 		/*
-		 * d_path works from the end of the rb backwards, so we
+		 * d_path() works from the end of the rb backwards, so we
 		 * need to add enough zero bytes after the string to handle
 		 * the 64bit alignment we do later.
 		 */
-		buf = kzalloc(PATH_MAX + sizeof(u64), GFP_KERNEL);
-		if (!buf) {
-			name = strncpy(tmp, "//enomem", sizeof(tmp));
-			goto got_name;
-		}
-		name = d_path(&file->f_path, buf, PATH_MAX);
+		name = d_path(&file->f_path, buf, PATH_MAX - sizeof(u64));
 		if (IS_ERR(name)) {
-			name = strncpy(tmp, "//toolong", sizeof(tmp));
-			goto got_name;
+			name = "//toolong";
+			goto cpy_name;
 		}
 		inode = file_inode(vma->vm_file);
 		dev = inode->i_sb->s_dev;
@@ -5128,34 +5163,39 @@
 		gen = inode->i_generation;
 		maj = MAJOR(dev);
 		min = MINOR(dev);
-
-	} else {
-		if (arch_vma_name(mmap_event->vma)) {
-			name = strncpy(tmp, arch_vma_name(mmap_event->vma),
-				       sizeof(tmp) - 1);
-			tmp[sizeof(tmp) - 1] = '\0';
-			goto got_name;
-		}
-
-		if (!vma->vm_mm) {
-			name = strncpy(tmp, "[vdso]", sizeof(tmp));
-			goto got_name;
-		} else if (vma->vm_start <= vma->vm_mm->start_brk &&
-				vma->vm_end >= vma->vm_mm->brk) {
-			name = strncpy(tmp, "[heap]", sizeof(tmp));
-			goto got_name;
-		} else if (vma->vm_start <= vma->vm_mm->start_stack &&
-				vma->vm_end >= vma->vm_mm->start_stack) {
-			name = strncpy(tmp, "[stack]", sizeof(tmp));
-			goto got_name;
-		}
-
-		name = strncpy(tmp, "//anon", sizeof(tmp));
 		goto got_name;
+	} else {
+		name = (char *)arch_vma_name(vma);
+		if (name)
+			goto cpy_name;
+
+		if (vma->vm_start <= vma->vm_mm->start_brk &&
+				vma->vm_end >= vma->vm_mm->brk) {
+			name = "[heap]";
+			goto cpy_name;
+		}
+		if (vma->vm_start <= vma->vm_mm->start_stack &&
+				vma->vm_end >= vma->vm_mm->start_stack) {
+			name = "[stack]";
+			goto cpy_name;
+		}
+
+		name = "//anon";
+		goto cpy_name;
 	}
 
+cpy_name:
+	strlcpy(tmp, name, sizeof(tmp));
+	name = tmp;
 got_name:
-	size = ALIGN(strlen(name)+1, sizeof(u64));
+	/*
+	 * Since our buffer works in 8 byte units we need to align our string
+	 * size to a multiple of 8. However, we must guarantee the tail end is
+	 * zero'd out to avoid leaking random bits to userspace.
+	 */
+	size = strlen(name)+1;
+	while (!IS_ALIGNED(size, sizeof(u64)))
+		name[size++] = '\0';
 
 	mmap_event->file_name = name;
 	mmap_event->file_size = size;
@@ -6292,6 +6332,7 @@
 
 	return snprintf(page, PAGE_SIZE-1, "%d\n", pmu->type);
 }
+static DEVICE_ATTR_RO(type);
 
 static ssize_t
 perf_event_mux_interval_ms_show(struct device *dev,
@@ -6336,17 +6377,19 @@
 
 	return count;
 }
+static DEVICE_ATTR_RW(perf_event_mux_interval_ms);
 
-static struct device_attribute pmu_dev_attrs[] = {
-	__ATTR_RO(type),
-	__ATTR_RW(perf_event_mux_interval_ms),
-	__ATTR_NULL,
+static struct attribute *pmu_dev_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_perf_event_mux_interval_ms.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(pmu_dev);
 
 static int pmu_bus_running;
 static struct bus_type pmu_bus = {
 	.name		= "event_source",
-	.dev_attrs	= pmu_dev_attrs,
+	.dev_groups	= pmu_dev_groups,
 };
 
 static void pmu_dev_release(struct device *dev)
@@ -7126,7 +7169,6 @@
 	}
 
 	perf_install_in_context(ctx, event, event->cpu);
-	++ctx->generation;
 	perf_unpin_context(ctx);
 	mutex_unlock(&ctx->mutex);
 
@@ -7209,7 +7251,6 @@
 	WARN_ON_ONCE(ctx->parent_ctx);
 	mutex_lock(&ctx->mutex);
 	perf_install_in_context(ctx, event, cpu);
-	++ctx->generation;
 	perf_unpin_context(ctx);
 	mutex_unlock(&ctx->mutex);
 
diff --git a/kernel/events/internal.h b/kernel/events/internal.h
index ca65997..569b2187 100644
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -82,16 +82,16 @@
 }
 
 #define DEFINE_OUTPUT_COPY(func_name, memcpy_func)			\
-static inline unsigned int						\
+static inline unsigned long						\
 func_name(struct perf_output_handle *handle,				\
-	  const void *buf, unsigned int len)				\
+	  const void *buf, unsigned long len)				\
 {									\
 	unsigned long size, written;					\
 									\
 	do {								\
-		size = min_t(unsigned long, handle->size, len);		\
-									\
+		size    = min(handle->size, len);			\
 		written = memcpy_func(handle->addr, buf, size);		\
+		written = size - written;				\
 									\
 		len -= written;						\
 		handle->addr += written;				\
@@ -110,20 +110,37 @@
 	return len;							\
 }
 
-static inline int memcpy_common(void *dst, const void *src, size_t n)
+static inline unsigned long
+memcpy_common(void *dst, const void *src, unsigned long n)
 {
 	memcpy(dst, src, n);
-	return n;
+	return 0;
 }
 
 DEFINE_OUTPUT_COPY(__output_copy, memcpy_common)
 
-#define MEMCPY_SKIP(dst, src, n) (n)
+static inline unsigned long
+memcpy_skip(void *dst, const void *src, unsigned long n)
+{
+	return 0;
+}
 
-DEFINE_OUTPUT_COPY(__output_skip, MEMCPY_SKIP)
+DEFINE_OUTPUT_COPY(__output_skip, memcpy_skip)
 
 #ifndef arch_perf_out_copy_user
-#define arch_perf_out_copy_user __copy_from_user_inatomic
+#define arch_perf_out_copy_user arch_perf_out_copy_user
+
+static inline unsigned long
+arch_perf_out_copy_user(void *dst, const void *src, unsigned long n)
+{
+	unsigned long ret;
+
+	pagefault_disable();
+	ret = __copy_from_user_inatomic(dst, src, n);
+	pagefault_enable();
+
+	return ret;
+}
 #endif
 
 DEFINE_OUTPUT_COPY(__output_copy_user, arch_perf_out_copy_user)
diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index cd55144..e8b168a 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -12,40 +12,10 @@
 #include <linux/perf_event.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/circ_buf.h>
 
 #include "internal.h"
 
-static bool perf_output_space(struct ring_buffer *rb, unsigned long tail,
-			      unsigned long offset, unsigned long head)
-{
-	unsigned long sz = perf_data_size(rb);
-	unsigned long mask = sz - 1;
-
-	/*
-	 * check if user-writable
-	 * overwrite : over-write its own tail
-	 * !overwrite: buffer possibly drops events.
-	 */
-	if (rb->overwrite)
-		return true;
-
-	/*
-	 * verify that payload is not bigger than buffer
-	 * otherwise masking logic may fail to detect
-	 * the "not enough space" condition
-	 */
-	if ((head - offset) > sz)
-		return false;
-
-	offset = (offset - tail) & mask;
-	head   = (head   - tail) & mask;
-
-	if ((int)(head - offset) < 0)
-		return false;
-
-	return true;
-}
-
 static void perf_output_wakeup(struct perf_output_handle *handle)
 {
 	atomic_set(&handle->rb->poll, POLL_IN);
@@ -87,15 +57,36 @@
 		goto out;
 
 	/*
-	 * Publish the known good head. Rely on the full barrier implied
-	 * by atomic_dec_and_test() order the rb->head read and this
-	 * write.
+	 * Since the mmap() consumer (userspace) can run on a different CPU:
+	 *
+	 *   kernel				user
+	 *
+	 *   READ ->data_tail			READ ->data_head
+	 *   smp_mb()	(A)			smp_rmb()	(C)
+	 *   WRITE $data			READ $data
+	 *   smp_wmb()	(B)			smp_mb()	(D)
+	 *   STORE ->data_head			WRITE ->data_tail
+	 *
+	 * Where A pairs with D, and B pairs with C.
+	 *
+	 * I don't think A needs to be a full barrier because we won't in fact
+	 * write data until we see the store from userspace. So we simply don't
+	 * issue the data WRITE until we observe it. Be conservative for now.
+	 *
+	 * OTOH, D needs to be a full barrier since it separates the data READ
+	 * from the tail WRITE.
+	 *
+	 * For B a WMB is sufficient since it separates two WRITEs, and for C
+	 * an RMB is sufficient since it separates two READs.
+	 *
+	 * See perf_output_begin().
 	 */
+	smp_wmb();
 	rb->user_page->data_head = head;
 
 	/*
-	 * Now check if we missed an update, rely on the (compiler)
-	 * barrier in atomic_dec_and_test() to re-read rb->head.
+	 * Now check if we missed an update -- rely on previous implied
+	 * compiler barriers to force a re-read.
 	 */
 	if (unlikely(head != local_read(&rb->head))) {
 		local_inc(&rb->nest);
@@ -114,8 +105,7 @@
 {
 	struct ring_buffer *rb;
 	unsigned long tail, offset, head;
-	int have_lost;
-	struct perf_sample_data sample_data;
+	int have_lost, page_shift;
 	struct {
 		struct perf_event_header header;
 		u64			 id;
@@ -130,55 +120,63 @@
 		event = event->parent;
 
 	rb = rcu_dereference(event->rb);
-	if (!rb)
+	if (unlikely(!rb))
 		goto out;
 
-	handle->rb	= rb;
-	handle->event	= event;
-
-	if (!rb->nr_pages)
+	if (unlikely(!rb->nr_pages))
 		goto out;
 
+	handle->rb    = rb;
+	handle->event = event;
+
 	have_lost = local_read(&rb->lost);
-	if (have_lost) {
-		lost_event.header.size = sizeof(lost_event);
-		perf_event_header__init_id(&lost_event.header, &sample_data,
-					   event);
-		size += lost_event.header.size;
+	if (unlikely(have_lost)) {
+		size += sizeof(lost_event);
+		if (event->attr.sample_id_all)
+			size += event->id_header_size;
 	}
 
 	perf_output_get_handle(handle);
 
 	do {
-		/*
-		 * Userspace could choose to issue a mb() before updating the
-		 * tail pointer. So that all reads will be completed before the
-		 * write is issued.
-		 */
 		tail = ACCESS_ONCE(rb->user_page->data_tail);
-		smp_rmb();
 		offset = head = local_read(&rb->head);
-		head += size;
-		if (unlikely(!perf_output_space(rb, tail, offset, head)))
+		if (!rb->overwrite &&
+		    unlikely(CIRC_SPACE(head, tail, perf_data_size(rb)) < size))
 			goto fail;
+		head += size;
 	} while (local_cmpxchg(&rb->head, offset, head) != offset);
 
-	if (head - local_read(&rb->wakeup) > rb->watermark)
+	/*
+	 * Separate the userpage->tail read from the data stores below.
+	 * Matches the MB userspace SHOULD issue after reading the data
+	 * and before storing the new tail position.
+	 *
+	 * See perf_output_put_handle().
+	 */
+	smp_mb();
+
+	if (unlikely(head - local_read(&rb->wakeup) > rb->watermark))
 		local_add(rb->watermark, &rb->wakeup);
 
-	handle->page = offset >> (PAGE_SHIFT + page_order(rb));
-	handle->page &= rb->nr_pages - 1;
-	handle->size = offset & ((PAGE_SIZE << page_order(rb)) - 1);
-	handle->addr = rb->data_pages[handle->page];
-	handle->addr += handle->size;
-	handle->size = (PAGE_SIZE << page_order(rb)) - handle->size;
+	page_shift = PAGE_SHIFT + page_order(rb);
 
-	if (have_lost) {
+	handle->page = (offset >> page_shift) & (rb->nr_pages - 1);
+	offset &= (1UL << page_shift) - 1;
+	handle->addr = rb->data_pages[handle->page] + offset;
+	handle->size = (1UL << page_shift) - offset;
+
+	if (unlikely(have_lost)) {
+		struct perf_sample_data sample_data;
+
+		lost_event.header.size = sizeof(lost_event);
 		lost_event.header.type = PERF_RECORD_LOST;
 		lost_event.header.misc = 0;
 		lost_event.id          = event->id;
 		lost_event.lost        = local_xchg(&rb->lost, 0);
 
+		perf_event_header__init_id(&lost_event.header,
+					   &sample_data, event);
 		perf_output_put(handle, lost_event);
 		perf_event__output_id_sample(event, handle, &sample_data);
 	}
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index ad8e1bd..24b7d6c 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -35,6 +35,7 @@
 #include <linux/kdebug.h>	/* notifier mechanism */
 #include "../../mm/internal.h"	/* munlock_vma_page */
 #include <linux/percpu-rwsem.h>
+#include <linux/task_work.h>
 
 #include <linux/uprobes.h>
 
@@ -244,12 +245,12 @@
  * the architecture. If an arch has variable length instruction and the
  * breakpoint instruction is not of the smallest length instruction
  * supported by that architecture then we need to modify is_trap_at_addr and
- * write_opcode accordingly. This would never be a problem for archs that
- * have fixed length instructions.
+ * uprobe_write_opcode accordingly. This would never be a problem for archs
+ * that have fixed length instructions.
  */
 
 /*
- * write_opcode - write the opcode at a given virtual address.
+ * uprobe_write_opcode - write the opcode at a given virtual address.
  * @mm: the probed process address space.
  * @vaddr: the virtual address to store the opcode.
  * @opcode: opcode to be written at @vaddr.
@@ -260,7 +261,7 @@
  * For mm @mm, write the opcode at @vaddr.
  * Return 0 (success) or a negative errno.
  */
-static int write_opcode(struct mm_struct *mm, unsigned long vaddr,
+int uprobe_write_opcode(struct mm_struct *mm, unsigned long vaddr,
 			uprobe_opcode_t opcode)
 {
 	struct page *old_page, *new_page;
@@ -314,7 +315,7 @@
  */
 int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
 {
-	return write_opcode(mm, vaddr, UPROBE_SWBP_INSN);
+	return uprobe_write_opcode(mm, vaddr, UPROBE_SWBP_INSN);
 }
 
 /**
@@ -329,7 +330,7 @@
 int __weak
 set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
 {
-	return write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn);
+	return uprobe_write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn);
 }
 
 static int match_uprobe(struct uprobe *l, struct uprobe *r)
@@ -503,9 +504,8 @@
 	return ret;
 }
 
-static int
-__copy_insn(struct address_space *mapping, struct file *filp, char *insn,
-			unsigned long nbytes, loff_t offset)
+static int __copy_insn(struct address_space *mapping, struct file *filp,
+			void *insn, int nbytes, loff_t offset)
 {
 	struct page *page;
 
@@ -527,28 +527,28 @@
 
 static int copy_insn(struct uprobe *uprobe, struct file *filp)
 {
-	struct address_space *mapping;
-	unsigned long nbytes;
-	int bytes;
+	struct address_space *mapping = uprobe->inode->i_mapping;
+	loff_t offs = uprobe->offset;
+	void *insn = uprobe->arch.insn;
+	int size = MAX_UINSN_BYTES;
+	int len, err = -EIO;
 
-	nbytes = PAGE_SIZE - (uprobe->offset & ~PAGE_MASK);
-	mapping = uprobe->inode->i_mapping;
+	/* Copy only available bytes, -EIO if nothing was read */
+	do {
+		if (offs >= i_size_read(uprobe->inode))
+			break;
 
-	/* Instruction at end of binary; copy only available bytes */
-	if (uprobe->offset + MAX_UINSN_BYTES > uprobe->inode->i_size)
-		bytes = uprobe->inode->i_size - uprobe->offset;
-	else
-		bytes = MAX_UINSN_BYTES;
-
-	/* Instruction at the page-boundary; copy bytes in second page */
-	if (nbytes < bytes) {
-		int err = __copy_insn(mapping, filp, uprobe->arch.insn + nbytes,
-				bytes - nbytes, uprobe->offset + nbytes);
+		len = min_t(int, size, PAGE_SIZE - (offs & ~PAGE_MASK));
+		err = __copy_insn(mapping, filp, insn, len, offs);
 		if (err)
-			return err;
-		bytes = nbytes;
-	}
-	return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset);
+			break;
+
+		insn += len;
+		offs += len;
+		size -= len;
+	} while (size);
+
+	return err;
 }
 
 static int prepare_uprobe(struct uprobe *uprobe, struct file *file,
@@ -576,7 +576,7 @@
 	if (ret)
 		goto out;
 
-	/* write_opcode() assumes we don't cross page boundary */
+	/* uprobe_write_opcode() assumes we don't cross page boundary */
 	BUG_ON((uprobe->offset & ~PAGE_MASK) +
 			UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
 
@@ -1096,21 +1096,22 @@
 }
 
 /* Slot allocation for XOL */
-static int xol_add_vma(struct xol_area *area)
+static int xol_add_vma(struct mm_struct *mm, struct xol_area *area)
 {
-	struct mm_struct *mm = current->mm;
 	int ret = -EALREADY;
 
 	down_write(&mm->mmap_sem);
 	if (mm->uprobes_state.xol_area)
 		goto fail;
 
-	ret = -ENOMEM;
-	/* Try to map as high as possible, this is only a hint. */
-	area->vaddr = get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE, PAGE_SIZE, 0, 0);
-	if (area->vaddr & ~PAGE_MASK) {
-		ret = area->vaddr;
-		goto fail;
+	if (!area->vaddr) {
+		/* Try to map as high as possible, this is only a hint. */
+		area->vaddr = get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE,
+						PAGE_SIZE, 0, 0);
+		if (area->vaddr & ~PAGE_MASK) {
+			ret = area->vaddr;
+			goto fail;
+		}
 	}
 
 	ret = install_special_mapping(mm, area->vaddr, PAGE_SIZE,
@@ -1120,13 +1121,49 @@
 
 	smp_wmb();	/* pairs with get_xol_area() */
 	mm->uprobes_state.xol_area = area;
-	ret = 0;
  fail:
 	up_write(&mm->mmap_sem);
 
 	return ret;
 }
 
+static struct xol_area *__create_xol_area(unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	uprobe_opcode_t insn = UPROBE_SWBP_INSN;
+	struct xol_area *area;
+
+	area = kmalloc(sizeof(*area), GFP_KERNEL);
+	if (unlikely(!area))
+		goto out;
+
+	area->bitmap = kzalloc(BITS_TO_LONGS(UINSNS_PER_PAGE) * sizeof(long), GFP_KERNEL);
+	if (!area->bitmap)
+		goto free_area;
+
+	area->page = alloc_page(GFP_HIGHUSER);
+	if (!area->page)
+		goto free_bitmap;
+
+	area->vaddr = vaddr;
+	init_waitqueue_head(&area->wq);
+	/* Reserve the 1st slot for get_trampoline_vaddr() */
+	set_bit(0, area->bitmap);
+	atomic_set(&area->slot_count, 1);
+	copy_to_page(area->page, 0, &insn, UPROBE_SWBP_INSN_SIZE);
+
+	if (!xol_add_vma(mm, area))
+		return area;
+
+	__free_page(area->page);
+ free_bitmap:
+	kfree(area->bitmap);
+ free_area:
+	kfree(area);
+ out:
+	return NULL;
+}
+
 /*
  * get_xol_area - Allocate process's xol_area if necessary.
  * This area will be used for storing instructions for execution out of line.
@@ -1137,42 +1174,12 @@
 {
 	struct mm_struct *mm = current->mm;
 	struct xol_area *area;
-	uprobe_opcode_t insn = UPROBE_SWBP_INSN;
+
+	if (!mm->uprobes_state.xol_area)
+		__create_xol_area(0);
 
 	area = mm->uprobes_state.xol_area;
-	if (area)
-		goto ret;
-
-	area = kzalloc(sizeof(*area), GFP_KERNEL);
-	if (unlikely(!area))
-		goto out;
-
-	area->bitmap = kzalloc(BITS_TO_LONGS(UINSNS_PER_PAGE) * sizeof(long), GFP_KERNEL);
-	if (!area->bitmap)
-		goto free_area;
-
-	area->page = alloc_page(GFP_HIGHUSER);
-	if (!area->page)
-		goto free_bitmap;
-
-	/* allocate first slot of task's xol_area for the return probes */
-	set_bit(0, area->bitmap);
-	copy_to_page(area->page, 0, &insn, UPROBE_SWBP_INSN_SIZE);
-	atomic_set(&area->slot_count, 1);
-	init_waitqueue_head(&area->wq);
-
-	if (!xol_add_vma(area))
-		return area;
-
-	__free_page(area->page);
- free_bitmap:
-	kfree(area->bitmap);
- free_area:
-	kfree(area);
- out:
-	area = mm->uprobes_state.xol_area;
- ret:
-	smp_read_barrier_depends();     /* pairs with wmb in xol_add_vma() */
+	smp_read_barrier_depends();	/* pairs with wmb in xol_add_vma() */
 	return area;
 }
 
@@ -1256,7 +1263,8 @@
 		return 0;
 
 	/* Initialize the slot */
-	copy_to_page(area->page, xol_vaddr, uprobe->arch.insn, MAX_UINSN_BYTES);
+	copy_to_page(area->page, xol_vaddr,
+			uprobe->arch.ixol, sizeof(uprobe->arch.ixol));
 	/*
 	 * We probably need flush_icache_user_range() but it needs vma.
 	 * This should work on supported architectures too.
@@ -1345,14 +1353,6 @@
 }
 
 /*
- * Called in context of a new clone/fork from copy_process.
- */
-void uprobe_copy_process(struct task_struct *t)
-{
-	t->utask = NULL;
-}
-
-/*
  * Allocate a uprobe_task object for the task if if necessary.
  * Called when the thread hits a breakpoint.
  *
@@ -1367,6 +1367,90 @@
 	return current->utask;
 }
 
+static int dup_utask(struct task_struct *t, struct uprobe_task *o_utask)
+{
+	struct uprobe_task *n_utask;
+	struct return_instance **p, *o, *n;
+
+	n_utask = kzalloc(sizeof(struct uprobe_task), GFP_KERNEL);
+	if (!n_utask)
+		return -ENOMEM;
+	t->utask = n_utask;
+
+	p = &n_utask->return_instances;
+	for (o = o_utask->return_instances; o; o = o->next) {
+		n = kmalloc(sizeof(struct return_instance), GFP_KERNEL);
+		if (!n)
+			return -ENOMEM;
+
+		*n = *o;
+		atomic_inc(&n->uprobe->ref);
+		n->next = NULL;
+
+		*p = n;
+		p = &n->next;
+		n_utask->depth++;
+	}
+
+	return 0;
+}
+
+static void uprobe_warn(struct task_struct *t, const char *msg)
+{
+	pr_warn("uprobe: %s:%d failed to %s\n",
+			current->comm, current->pid, msg);
+}
+
+static void dup_xol_work(struct callback_head *work)
+{
+	kfree(work);
+
+	if (current->flags & PF_EXITING)
+		return;
+
+	if (!__create_xol_area(current->utask->vaddr))
+		uprobe_warn(current, "dup xol area");
+}
+
+/*
+ * Called in context of a new clone/fork from copy_process.
+ */
+void uprobe_copy_process(struct task_struct *t, unsigned long flags)
+{
+	struct uprobe_task *utask = current->utask;
+	struct mm_struct *mm = current->mm;
+	struct callback_head *work;
+	struct xol_area *area;
+
+	t->utask = NULL;
+
+	if (!utask || !utask->return_instances)
+		return;
+
+	if (mm == t->mm && !(flags & CLONE_VFORK))
+		return;
+
+	if (dup_utask(t, utask))
+		return uprobe_warn(t, "dup ret instances");
+
+	/* The task can fork() after dup_xol_work() fails */
+	area = mm->uprobes_state.xol_area;
+	if (!area)
+		return uprobe_warn(t, "dup xol area");
+
+	if (mm == t->mm)
+		return;
+
+	/* TODO: move it into the union in uprobe_task */
+	work = kmalloc(sizeof(*work), GFP_KERNEL);
+	if (!work)
+		return uprobe_warn(t, "dup xol area");
+
+	t->utask->vaddr = area->vaddr;
+	init_task_work(work, dup_xol_work);
+	task_work_add(t, work, true);
+}
+
 /*
  * Current area->vaddr notion assume the trampoline address is always
  * equal area->vaddr.
@@ -1857,9 +1941,4 @@
 
 	return register_die_notifier(&uprobe_exception_nb);
 }
-module_init(init_uprobes);
-
-static void __exit exit_uprobes(void)
-{
-}
-module_exit(exit_uprobes);
+__initcall(init_uprobes);
diff --git a/kernel/fork.c b/kernel/fork.c
index c93be06..f6d11fc 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1370,7 +1370,6 @@
 	INIT_LIST_HEAD(&p->pi_state_list);
 	p->pi_state_cache = NULL;
 #endif
-	uprobe_copy_process(p);
 	/*
 	 * sigaltstack should be cleared when sharing the same VM
 	 */
@@ -1487,6 +1486,7 @@
 	perf_event_fork(p);
 
 	trace_task_newtask(p, clone_flags);
+	uprobe_copy_process(p, clone_flags);
 
 	return p;
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 514bcfd..3e59f95 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -956,7 +956,7 @@
 			goto out_mput;
 		}
 
-		sched_setscheduler(t, SCHED_FIFO, &param);
+		sched_setscheduler_nocheck(t, SCHED_FIFO, &param);
 
 		/*
 		 * We keep the reference to the task struct even if
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index e16c45b..4e8e14c 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -4224,7 +4224,7 @@
 	printk("\n%srcu_scheduler_active = %d, debug_locks = %d\n",
 	       !rcu_lockdep_current_cpu_online()
 			? "RCU used illegally from offline CPU!\n"
-			: rcu_is_cpu_idle()
+			: !rcu_is_watching()
 				? "RCU used illegally from idle CPU!\n"
 				: "",
 	       rcu_scheduler_active, debug_locks);
@@ -4247,7 +4247,7 @@
 	 * So complain bitterly if someone does call rcu_read_lock(),
 	 * rcu_read_lock_bh() and so on from extended quiescent states.
 	 */
-	if (rcu_is_cpu_idle())
+	if (!rcu_is_watching())
 		printk("RCU used illegally from extended quiescent state!\n");
 
 	lockdep_print_held_locks(curr);
diff --git a/kernel/rcu/Makefile b/kernel/rcu/Makefile
new file mode 100644
index 0000000..01e9ec3
--- /dev/null
+++ b/kernel/rcu/Makefile
@@ -0,0 +1,6 @@
+obj-y += update.o srcu.o
+obj-$(CONFIG_RCU_TORTURE_TEST) += torture.o
+obj-$(CONFIG_TREE_RCU) += tree.o
+obj-$(CONFIG_TREE_PREEMPT_RCU) += tree.o
+obj-$(CONFIG_TREE_RCU_TRACE) += tree_trace.o
+obj-$(CONFIG_TINY_RCU) += tiny.o
diff --git a/kernel/rcu.h b/kernel/rcu/rcu.h
similarity index 94%
rename from kernel/rcu.h
rename to kernel/rcu/rcu.h
index 7713196..7859a0a 100644
--- a/kernel/rcu.h
+++ b/kernel/rcu/rcu.h
@@ -122,4 +122,11 @@
 
 #endif /* #ifdef CONFIG_RCU_STALL_COMMON */
 
+/*
+ * Strings used in tracepoints need to be exported via the
+ * tracing system such that tools like perf and trace-cmd can
+ * translate the string address pointers to actual text.
+ */
+#define TPS(x)  tracepoint_string(x)
+
 #endif /* __LINUX_RCU_H */
diff --git a/kernel/srcu.c b/kernel/rcu/srcu.c
similarity index 100%
rename from kernel/srcu.c
rename to kernel/rcu/srcu.c
diff --git a/kernel/rcutiny.c b/kernel/rcu/tiny.c
similarity index 90%
rename from kernel/rcutiny.c
rename to kernel/rcu/tiny.c
index 9ed6075..0c9a934 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcu/tiny.c
@@ -35,6 +35,7 @@
 #include <linux/time.h>
 #include <linux/cpu.h>
 #include <linux/prefetch.h>
+#include <linux/ftrace_event.h>
 
 #ifdef CONFIG_RCU_TRACE
 #include <trace/events/rcu.h>
@@ -42,7 +43,7 @@
 
 #include "rcu.h"
 
-/* Forward declarations for rcutiny_plugin.h. */
+/* Forward declarations for tiny_plugin.h. */
 struct rcu_ctrlblk;
 static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp);
 static void rcu_process_callbacks(struct softirq_action *unused);
@@ -52,22 +53,23 @@
 
 static long long rcu_dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
 
-#include "rcutiny_plugin.h"
+#include "tiny_plugin.h"
 
 /* Common code for rcu_idle_enter() and rcu_irq_exit(), see kernel/rcutree.c. */
 static void rcu_idle_enter_common(long long newval)
 {
 	if (newval) {
-		RCU_TRACE(trace_rcu_dyntick("--=",
+		RCU_TRACE(trace_rcu_dyntick(TPS("--="),
 					    rcu_dynticks_nesting, newval));
 		rcu_dynticks_nesting = newval;
 		return;
 	}
-	RCU_TRACE(trace_rcu_dyntick("Start", rcu_dynticks_nesting, newval));
+	RCU_TRACE(trace_rcu_dyntick(TPS("Start"),
+				    rcu_dynticks_nesting, newval));
 	if (!is_idle_task(current)) {
-		struct task_struct *idle = idle_task(smp_processor_id());
+		struct task_struct *idle __maybe_unused = idle_task(smp_processor_id());
 
-		RCU_TRACE(trace_rcu_dyntick("Error on entry: not idle task",
+		RCU_TRACE(trace_rcu_dyntick(TPS("Entry error: not idle task"),
 					    rcu_dynticks_nesting, newval));
 		ftrace_dump(DUMP_ALL);
 		WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
@@ -120,15 +122,15 @@
 static void rcu_idle_exit_common(long long oldval)
 {
 	if (oldval) {
-		RCU_TRACE(trace_rcu_dyntick("++=",
+		RCU_TRACE(trace_rcu_dyntick(TPS("++="),
 					    oldval, rcu_dynticks_nesting));
 		return;
 	}
-	RCU_TRACE(trace_rcu_dyntick("End", oldval, rcu_dynticks_nesting));
+	RCU_TRACE(trace_rcu_dyntick(TPS("End"), oldval, rcu_dynticks_nesting));
 	if (!is_idle_task(current)) {
-		struct task_struct *idle = idle_task(smp_processor_id());
+		struct task_struct *idle __maybe_unused = idle_task(smp_processor_id());
 
-		RCU_TRACE(trace_rcu_dyntick("Error on exit: not idle task",
+		RCU_TRACE(trace_rcu_dyntick(TPS("Exit error: not idle task"),
 			  oldval, rcu_dynticks_nesting));
 		ftrace_dump(DUMP_ALL);
 		WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
@@ -174,18 +176,18 @@
 }
 EXPORT_SYMBOL_GPL(rcu_irq_enter);
 
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE)
 
 /*
  * Test whether RCU thinks that the current CPU is idle.
  */
-int rcu_is_cpu_idle(void)
+bool __rcu_is_watching(void)
 {
-	return !rcu_dynticks_nesting;
+	return rcu_dynticks_nesting;
 }
-EXPORT_SYMBOL(rcu_is_cpu_idle);
+EXPORT_SYMBOL(__rcu_is_watching);
 
-#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+#endif /* defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
 
 /*
  * Test whether the current CPU was interrupted from idle.  Nested
@@ -273,7 +275,7 @@
 	if (&rcp->rcucblist == rcp->donetail) {
 		RCU_TRACE(trace_rcu_batch_start(rcp->name, 0, 0, -1));
 		RCU_TRACE(trace_rcu_batch_end(rcp->name, 0,
-					      ACCESS_ONCE(rcp->rcucblist),
+					      !!ACCESS_ONCE(rcp->rcucblist),
 					      need_resched(),
 					      is_idle_task(current),
 					      false));
@@ -304,7 +306,8 @@
 		RCU_TRACE(cb_count++);
 	}
 	RCU_TRACE(rcu_trace_sub_qlen(rcp, cb_count));
-	RCU_TRACE(trace_rcu_batch_end(rcp->name, cb_count, 0, need_resched(),
+	RCU_TRACE(trace_rcu_batch_end(rcp->name,
+				      cb_count, 0, need_resched(),
 				      is_idle_task(current),
 				      false));
 }
diff --git a/kernel/rcutiny_plugin.h b/kernel/rcu/tiny_plugin.h
similarity index 100%
rename from kernel/rcutiny_plugin.h
rename to kernel/rcu/tiny_plugin.h
diff --git a/kernel/rcutorture.c b/kernel/rcu/torture.c
similarity index 99%
rename from kernel/rcutorture.c
rename to kernel/rcu/torture.c
index be63101..3929cd4 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcu/torture.c
@@ -52,6 +52,12 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul E. McKenney <paulmck@us.ibm.com> and Josh Triplett <josh@freedesktop.org>");
 
+MODULE_ALIAS("rcutorture");
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "rcutorture."
+
 static int fqs_duration;
 module_param(fqs_duration, int, 0444);
 MODULE_PARM_DESC(fqs_duration, "Duration of fqs bursts (us), 0 to disable");
diff --git a/kernel/rcutree.c b/kernel/rcu/tree.c
similarity index 94%
rename from kernel/rcutree.c
rename to kernel/rcu/tree.c
index 1dc9f36..4c06ddf 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcu/tree.c
@@ -41,6 +41,7 @@
 #include <linux/export.h>
 #include <linux/completion.h>
 #include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/percpu.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
@@ -56,17 +57,16 @@
 #include <linux/ftrace_event.h>
 #include <linux/suspend.h>
 
-#include "rcutree.h"
+#include "tree.h"
 #include <trace/events/rcu.h>
 
 #include "rcu.h"
 
-/*
- * Strings used in tracepoints need to be exported via the
- * tracing system such that tools like perf and trace-cmd can
- * translate the string address pointers to actual text.
- */
-#define TPS(x)	tracepoint_string(x)
+MODULE_ALIAS("rcutree");
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "rcutree."
 
 /* Data structures. */
 
@@ -222,7 +222,7 @@
 }
 EXPORT_SYMBOL_GPL(rcu_note_context_switch);
 
-DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
+static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
 	.dynticks_nesting = DYNTICK_TASK_EXIT_IDLE,
 	.dynticks = ATOMIC_INIT(1),
 #ifdef CONFIG_NO_HZ_FULL_SYSIDLE
@@ -371,7 +371,8 @@
 {
 	trace_rcu_dyntick(TPS("Start"), oldval, rdtp->dynticks_nesting);
 	if (!user && !is_idle_task(current)) {
-		struct task_struct *idle = idle_task(smp_processor_id());
+		struct task_struct *idle __maybe_unused =
+			idle_task(smp_processor_id());
 
 		trace_rcu_dyntick(TPS("Error on entry: not idle task"), oldval, 0);
 		ftrace_dump(DUMP_ORIG);
@@ -407,7 +408,7 @@
 	long long oldval;
 	struct rcu_dynticks *rdtp;
 
-	rdtp = &__get_cpu_var(rcu_dynticks);
+	rdtp = this_cpu_ptr(&rcu_dynticks);
 	oldval = rdtp->dynticks_nesting;
 	WARN_ON_ONCE((oldval & DYNTICK_TASK_NEST_MASK) == 0);
 	if ((oldval & DYNTICK_TASK_NEST_MASK) == DYNTICK_TASK_NEST_VALUE)
@@ -435,7 +436,7 @@
 
 	local_irq_save(flags);
 	rcu_eqs_enter(false);
-	rcu_sysidle_enter(&__get_cpu_var(rcu_dynticks), 0);
+	rcu_sysidle_enter(this_cpu_ptr(&rcu_dynticks), 0);
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL_GPL(rcu_idle_enter);
@@ -478,7 +479,7 @@
 	struct rcu_dynticks *rdtp;
 
 	local_irq_save(flags);
-	rdtp = &__get_cpu_var(rcu_dynticks);
+	rdtp = this_cpu_ptr(&rcu_dynticks);
 	oldval = rdtp->dynticks_nesting;
 	rdtp->dynticks_nesting--;
 	WARN_ON_ONCE(rdtp->dynticks_nesting < 0);
@@ -508,7 +509,8 @@
 	rcu_cleanup_after_idle(smp_processor_id());
 	trace_rcu_dyntick(TPS("End"), oldval, rdtp->dynticks_nesting);
 	if (!user && !is_idle_task(current)) {
-		struct task_struct *idle = idle_task(smp_processor_id());
+		struct task_struct *idle __maybe_unused =
+			idle_task(smp_processor_id());
 
 		trace_rcu_dyntick(TPS("Error on exit: not idle task"),
 				  oldval, rdtp->dynticks_nesting);
@@ -528,7 +530,7 @@
 	struct rcu_dynticks *rdtp;
 	long long oldval;
 
-	rdtp = &__get_cpu_var(rcu_dynticks);
+	rdtp = this_cpu_ptr(&rcu_dynticks);
 	oldval = rdtp->dynticks_nesting;
 	WARN_ON_ONCE(oldval < 0);
 	if (oldval & DYNTICK_TASK_NEST_MASK)
@@ -555,7 +557,7 @@
 
 	local_irq_save(flags);
 	rcu_eqs_exit(false);
-	rcu_sysidle_exit(&__get_cpu_var(rcu_dynticks), 0);
+	rcu_sysidle_exit(this_cpu_ptr(&rcu_dynticks), 0);
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL_GPL(rcu_idle_exit);
@@ -599,7 +601,7 @@
 	long long oldval;
 
 	local_irq_save(flags);
-	rdtp = &__get_cpu_var(rcu_dynticks);
+	rdtp = this_cpu_ptr(&rcu_dynticks);
 	oldval = rdtp->dynticks_nesting;
 	rdtp->dynticks_nesting++;
 	WARN_ON_ONCE(rdtp->dynticks_nesting == 0);
@@ -620,7 +622,7 @@
  */
 void rcu_nmi_enter(void)
 {
-	struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks);
+	struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
 
 	if (rdtp->dynticks_nmi_nesting == 0 &&
 	    (atomic_read(&rdtp->dynticks) & 0x1))
@@ -642,7 +644,7 @@
  */
 void rcu_nmi_exit(void)
 {
-	struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks);
+	struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
 
 	if (rdtp->dynticks_nmi_nesting == 0 ||
 	    --rdtp->dynticks_nmi_nesting != 0)
@@ -655,21 +657,34 @@
 }
 
 /**
- * rcu_is_cpu_idle - see if RCU thinks that the current CPU is idle
+ * __rcu_is_watching - are RCU read-side critical sections safe?
+ *
+ * Return true if RCU is watching the running CPU, which means that
+ * this CPU can safely enter RCU read-side critical sections.  Unlike
+ * rcu_is_watching(), the caller of __rcu_is_watching() must have at
+ * least disabled preemption.
+ */
+bool __rcu_is_watching(void)
+{
+	return atomic_read(this_cpu_ptr(&rcu_dynticks.dynticks)) & 0x1;
+}
+
+/**
+ * rcu_is_watching - see if RCU thinks that the current CPU is idle
  *
  * If the current CPU is in its idle loop and is neither in an interrupt
  * or NMI handler, return true.
  */
-int rcu_is_cpu_idle(void)
+bool rcu_is_watching(void)
 {
 	int ret;
 
 	preempt_disable();
-	ret = (atomic_read(&__get_cpu_var(rcu_dynticks).dynticks) & 0x1) == 0;
+	ret = __rcu_is_watching();
 	preempt_enable();
 	return ret;
 }
-EXPORT_SYMBOL(rcu_is_cpu_idle);
+EXPORT_SYMBOL_GPL(rcu_is_watching);
 
 #if defined(CONFIG_PROVE_RCU) && defined(CONFIG_HOTPLUG_CPU)
 
@@ -703,7 +718,7 @@
 	if (in_nmi())
 		return 1;
 	preempt_disable();
-	rdp = &__get_cpu_var(rcu_sched_data);
+	rdp = this_cpu_ptr(&rcu_sched_data);
 	rnp = rdp->mynode;
 	ret = (rdp->grpmask & rnp->qsmaskinit) ||
 	      !rcu_scheduler_fully_active;
@@ -723,7 +738,7 @@
  */
 static int rcu_is_cpu_rrupt_from_idle(void)
 {
-	return __get_cpu_var(rcu_dynticks).dynticks_nesting <= 1;
+	return __this_cpu_read(rcu_dynticks.dynticks_nesting) <= 1;
 }
 
 /*
@@ -802,8 +817,11 @@
 
 static void record_gp_stall_check_time(struct rcu_state *rsp)
 {
-	rsp->gp_start = jiffies;
-	rsp->jiffies_stall = jiffies + rcu_jiffies_till_stall_check();
+	unsigned long j = ACCESS_ONCE(jiffies);
+
+	rsp->gp_start = j;
+	smp_wmb(); /* Record start time before stall time. */
+	rsp->jiffies_stall = j + rcu_jiffies_till_stall_check();
 }
 
 /*
@@ -945,17 +963,48 @@
 
 static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp)
 {
+	unsigned long completed;
+	unsigned long gpnum;
+	unsigned long gps;
 	unsigned long j;
 	unsigned long js;
 	struct rcu_node *rnp;
 
-	if (rcu_cpu_stall_suppress)
+	if (rcu_cpu_stall_suppress || !rcu_gp_in_progress(rsp))
 		return;
 	j = ACCESS_ONCE(jiffies);
+
+	/*
+	 * Lots of memory barriers to reject false positives.
+	 *
+	 * The idea is to pick up rsp->gpnum, then rsp->jiffies_stall,
+	 * then rsp->gp_start, and finally rsp->completed.  These values
+	 * are updated in the opposite order with memory barriers (or
+	 * equivalent) during grace-period initialization and cleanup.
+	 * Now, a false positive can occur if we get an new value of
+	 * rsp->gp_start and a old value of rsp->jiffies_stall.  But given
+	 * the memory barriers, the only way that this can happen is if one
+	 * grace period ends and another starts between these two fetches.
+	 * Detect this by comparing rsp->completed with the previous fetch
+	 * from rsp->gpnum.
+	 *
+	 * Given this check, comparisons of jiffies, rsp->jiffies_stall,
+	 * and rsp->gp_start suffice to forestall false positives.
+	 */
+	gpnum = ACCESS_ONCE(rsp->gpnum);
+	smp_rmb(); /* Pick up ->gpnum first... */
 	js = ACCESS_ONCE(rsp->jiffies_stall);
+	smp_rmb(); /* ...then ->jiffies_stall before the rest... */
+	gps = ACCESS_ONCE(rsp->gp_start);
+	smp_rmb(); /* ...and finally ->gp_start before ->completed. */
+	completed = ACCESS_ONCE(rsp->completed);
+	if (ULONG_CMP_GE(completed, gpnum) ||
+	    ULONG_CMP_LT(j, js) ||
+	    ULONG_CMP_GE(gps, js))
+		return; /* No stall or GP completed since entering function. */
 	rnp = rdp->mynode;
 	if (rcu_gp_in_progress(rsp) &&
-	    (ACCESS_ONCE(rnp->qsmask) & rdp->grpmask) && ULONG_CMP_GE(j, js)) {
+	    (ACCESS_ONCE(rnp->qsmask) & rdp->grpmask)) {
 
 		/* We haven't checked in, so go dump stack. */
 		print_cpu_stall(rsp);
@@ -1310,7 +1359,7 @@
 }
 
 /*
- * Initialize a new grace period.
+ * Initialize a new grace period.  Return 0 if no grace period required.
  */
 static int rcu_gp_init(struct rcu_state *rsp)
 {
@@ -1319,18 +1368,27 @@
 
 	rcu_bind_gp_kthread();
 	raw_spin_lock_irq(&rnp->lock);
+	if (rsp->gp_flags == 0) {
+		/* Spurious wakeup, tell caller to go back to sleep.  */
+		raw_spin_unlock_irq(&rnp->lock);
+		return 0;
+	}
 	rsp->gp_flags = 0; /* Clear all flags: New grace period. */
 
-	if (rcu_gp_in_progress(rsp)) {
-		/* Grace period already in progress, don't start another.  */
+	if (WARN_ON_ONCE(rcu_gp_in_progress(rsp))) {
+		/*
+		 * Grace period already in progress, don't start another.
+		 * Not supposed to be able to happen.
+		 */
 		raw_spin_unlock_irq(&rnp->lock);
 		return 0;
 	}
 
 	/* Advance to a new grace period and initialize state. */
+	record_gp_stall_check_time(rsp);
+	smp_wmb(); /* Record GP times before starting GP. */
 	rsp->gpnum++;
 	trace_rcu_grace_period(rsp->name, rsp->gpnum, TPS("start"));
-	record_gp_stall_check_time(rsp);
 	raw_spin_unlock_irq(&rnp->lock);
 
 	/* Exclude any concurrent CPU-hotplug operations. */
@@ -1379,7 +1437,7 @@
 /*
  * Do one round of quiescent-state forcing.
  */
-int rcu_gp_fqs(struct rcu_state *rsp, int fqs_state_in)
+static int rcu_gp_fqs(struct rcu_state *rsp, int fqs_state_in)
 {
 	int fqs_state = fqs_state_in;
 	bool isidle = false;
@@ -1464,8 +1522,12 @@
 	rsp->fqs_state = RCU_GP_IDLE;
 	rdp = this_cpu_ptr(rsp->rda);
 	rcu_advance_cbs(rsp, rnp, rdp);  /* Reduce false positives below. */
-	if (cpu_needs_another_gp(rsp, rdp))
-		rsp->gp_flags = 1;
+	if (cpu_needs_another_gp(rsp, rdp)) {
+		rsp->gp_flags = RCU_GP_FLAG_INIT;
+		trace_rcu_grace_period(rsp->name,
+				       ACCESS_ONCE(rsp->gpnum),
+				       TPS("newreq"));
+	}
 	raw_spin_unlock_irq(&rnp->lock);
 }
 
@@ -1475,6 +1537,7 @@
 static int __noreturn rcu_gp_kthread(void *arg)
 {
 	int fqs_state;
+	int gf;
 	unsigned long j;
 	int ret;
 	struct rcu_state *rsp = arg;
@@ -1484,14 +1547,19 @@
 
 		/* Handle grace-period start. */
 		for (;;) {
+			trace_rcu_grace_period(rsp->name,
+					       ACCESS_ONCE(rsp->gpnum),
+					       TPS("reqwait"));
 			wait_event_interruptible(rsp->gp_wq,
-						 rsp->gp_flags &
+						 ACCESS_ONCE(rsp->gp_flags) &
 						 RCU_GP_FLAG_INIT);
-			if ((rsp->gp_flags & RCU_GP_FLAG_INIT) &&
-			    rcu_gp_init(rsp))
+			if (rcu_gp_init(rsp))
 				break;
 			cond_resched();
 			flush_signals(current);
+			trace_rcu_grace_period(rsp->name,
+					       ACCESS_ONCE(rsp->gpnum),
+					       TPS("reqwaitsig"));
 		}
 
 		/* Handle quiescent-state forcing. */
@@ -1501,10 +1569,16 @@
 			j = HZ;
 			jiffies_till_first_fqs = HZ;
 		}
+		ret = 0;
 		for (;;) {
-			rsp->jiffies_force_qs = jiffies + j;
+			if (!ret)
+				rsp->jiffies_force_qs = jiffies + j;
+			trace_rcu_grace_period(rsp->name,
+					       ACCESS_ONCE(rsp->gpnum),
+					       TPS("fqswait"));
 			ret = wait_event_interruptible_timeout(rsp->gp_wq,
-					(rsp->gp_flags & RCU_GP_FLAG_FQS) ||
+					((gf = ACCESS_ONCE(rsp->gp_flags)) &
+					 RCU_GP_FLAG_FQS) ||
 					(!ACCESS_ONCE(rnp->qsmask) &&
 					 !rcu_preempt_blocked_readers_cgp(rnp)),
 					j);
@@ -1513,13 +1587,23 @@
 			    !rcu_preempt_blocked_readers_cgp(rnp))
 				break;
 			/* If time for quiescent-state forcing, do it. */
-			if (ret == 0 || (rsp->gp_flags & RCU_GP_FLAG_FQS)) {
+			if (ULONG_CMP_GE(jiffies, rsp->jiffies_force_qs) ||
+			    (gf & RCU_GP_FLAG_FQS)) {
+				trace_rcu_grace_period(rsp->name,
+						       ACCESS_ONCE(rsp->gpnum),
+						       TPS("fqsstart"));
 				fqs_state = rcu_gp_fqs(rsp, fqs_state);
+				trace_rcu_grace_period(rsp->name,
+						       ACCESS_ONCE(rsp->gpnum),
+						       TPS("fqsend"));
 				cond_resched();
 			} else {
 				/* Deal with stray signal. */
 				cond_resched();
 				flush_signals(current);
+				trace_rcu_grace_period(rsp->name,
+						       ACCESS_ONCE(rsp->gpnum),
+						       TPS("fqswaitsig"));
 			}
 			j = jiffies_till_next_fqs;
 			if (j > HZ) {
@@ -1567,6 +1651,8 @@
 		return;
 	}
 	rsp->gp_flags = RCU_GP_FLAG_INIT;
+	trace_rcu_grace_period(rsp->name, ACCESS_ONCE(rsp->gpnum),
+			       TPS("newreq"));
 
 	/*
 	 * We can't do wakeups while holding the rnp->lock, as that
@@ -2268,7 +2354,7 @@
 	 * If called from an extended quiescent state, invoke the RCU
 	 * core in order to force a re-evaluation of RCU's idleness.
 	 */
-	if (rcu_is_cpu_idle() && cpu_online(smp_processor_id()))
+	if (!rcu_is_watching() && cpu_online(smp_processor_id()))
 		invoke_rcu_core();
 
 	/* If interrupts were disabled or CPU offline, don't invoke RCU core. */
@@ -2738,10 +2824,13 @@
 
 	for_each_rcu_flavor(rsp) {
 		rdp = per_cpu_ptr(rsp->rda, cpu);
-		if (rdp->qlen != rdp->qlen_lazy)
+		if (!rdp->nxtlist)
+			continue;
+		hc = true;
+		if (rdp->qlen != rdp->qlen_lazy || !all_lazy) {
 			al = false;
-		if (rdp->nxtlist)
-			hc = true;
+			break;
+		}
 	}
 	if (all_lazy)
 		*all_lazy = al;
@@ -3229,7 +3318,7 @@
 
 /*
  * Compute the rcu_node tree geometry from kernel parameters.  This cannot
- * replace the definitions in rcutree.h because those are needed to size
+ * replace the definitions in tree.h because those are needed to size
  * the ->node array in the rcu_state structure.
  */
 static void __init rcu_init_geometry(void)
@@ -3308,8 +3397,8 @@
 
 	rcu_bootup_announce();
 	rcu_init_geometry();
-	rcu_init_one(&rcu_sched_state, &rcu_sched_data);
 	rcu_init_one(&rcu_bh_state, &rcu_bh_data);
+	rcu_init_one(&rcu_sched_state, &rcu_sched_data);
 	__rcu_init_preempt();
 	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
 
@@ -3324,4 +3413,4 @@
 		rcu_cpu_notify(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
 }
 
-#include "rcutree_plugin.h"
+#include "tree_plugin.h"
diff --git a/kernel/rcutree.h b/kernel/rcu/tree.h
similarity index 99%
rename from kernel/rcutree.h
rename to kernel/rcu/tree.h
index 5f97eab..52be957 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcu/tree.h
@@ -104,6 +104,8 @@
 				    /* idle-period nonlazy_posted snapshot. */
 	unsigned long last_accelerate;
 				    /* Last jiffy CBs were accelerated. */
+	unsigned long last_advance_all;
+				    /* Last jiffy CBs were all advanced. */
 	int tick_nohz_enabled_snap; /* Previously seen value from sysfs. */
 #endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */
 };
diff --git a/kernel/rcutree_plugin.h b/kernel/rcu/tree_plugin.h
similarity index 96%
rename from kernel/rcutree_plugin.h
rename to kernel/rcu/tree_plugin.h
index 130c97b..3822ac0 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -28,7 +28,7 @@
 #include <linux/gfp.h>
 #include <linux/oom.h>
 #include <linux/smpboot.h>
-#include "time/tick-internal.h"
+#include "../time/tick-internal.h"
 
 #define RCU_KTHREAD_PRIO 1
 
@@ -96,10 +96,15 @@
 #endif /* #ifdef CONFIG_RCU_NOCB_CPU_ZERO */
 #ifdef CONFIG_RCU_NOCB_CPU_ALL
 	pr_info("\tOffload RCU callbacks from all CPUs\n");
-	cpumask_setall(rcu_nocb_mask);
+	cpumask_copy(rcu_nocb_mask, cpu_possible_mask);
 #endif /* #ifdef CONFIG_RCU_NOCB_CPU_ALL */
 #endif /* #ifndef CONFIG_RCU_NOCB_CPU_NONE */
 	if (have_rcu_nocb_mask) {
+		if (!cpumask_subset(rcu_nocb_mask, cpu_possible_mask)) {
+			pr_info("\tNote: kernel parameter 'rcu_nocbs=' contains nonexistent CPUs.\n");
+			cpumask_and(rcu_nocb_mask, cpu_possible_mask,
+				    rcu_nocb_mask);
+		}
 		cpulist_scnprintf(nocb_buf, sizeof(nocb_buf), rcu_nocb_mask);
 		pr_info("\tOffload RCU callbacks from CPUs: %s.\n", nocb_buf);
 		if (rcu_nocb_poll)
@@ -660,7 +665,7 @@
 
 static void rcu_preempt_do_callbacks(void)
 {
-	rcu_do_batch(&rcu_preempt_state, &__get_cpu_var(rcu_preempt_data));
+	rcu_do_batch(&rcu_preempt_state, this_cpu_ptr(&rcu_preempt_data));
 }
 
 #endif /* #ifdef CONFIG_RCU_BOOST */
@@ -1128,7 +1133,7 @@
 
 #ifdef CONFIG_RCU_BOOST
 
-#include "rtmutex_common.h"
+#include "../rtmutex_common.h"
 
 #ifdef CONFIG_RCU_TRACE
 
@@ -1332,7 +1337,7 @@
  */
 static bool rcu_is_callbacks_kthread(void)
 {
-	return __get_cpu_var(rcu_cpu_kthread_task) == current;
+	return __this_cpu_read(rcu_cpu_kthread_task) == current;
 }
 
 #define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
@@ -1382,8 +1387,8 @@
 
 static void rcu_kthread_do_work(void)
 {
-	rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data));
-	rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
+	rcu_do_batch(&rcu_sched_state, this_cpu_ptr(&rcu_sched_data));
+	rcu_do_batch(&rcu_bh_state, this_cpu_ptr(&rcu_bh_data));
 	rcu_preempt_do_callbacks();
 }
 
@@ -1402,7 +1407,7 @@
 
 static int rcu_cpu_kthread_should_run(unsigned int cpu)
 {
-	return __get_cpu_var(rcu_cpu_has_work);
+	return __this_cpu_read(rcu_cpu_has_work);
 }
 
 /*
@@ -1412,8 +1417,8 @@
  */
 static void rcu_cpu_kthread(unsigned int cpu)
 {
-	unsigned int *statusp = &__get_cpu_var(rcu_cpu_kthread_status);
-	char work, *workp = &__get_cpu_var(rcu_cpu_has_work);
+	unsigned int *statusp = this_cpu_ptr(&rcu_cpu_kthread_status);
+	char work, *workp = this_cpu_ptr(&rcu_cpu_has_work);
 	int spincnt;
 
 	for (spincnt = 0; spincnt < 10; spincnt++) {
@@ -1630,17 +1635,23 @@
 extern int tick_nohz_enabled;
 
 /*
- * Try to advance callbacks for all flavors of RCU on the current CPU.
- * Afterwards, if there are any callbacks ready for immediate invocation,
- * return true.
+ * Try to advance callbacks for all flavors of RCU on the current CPU, but
+ * only if it has been awhile since the last time we did so.  Afterwards,
+ * if there are any callbacks ready for immediate invocation, return true.
  */
 static bool rcu_try_advance_all_cbs(void)
 {
 	bool cbs_ready = false;
 	struct rcu_data *rdp;
+	struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
 	struct rcu_node *rnp;
 	struct rcu_state *rsp;
 
+	/* Exit early if we advanced recently. */
+	if (jiffies == rdtp->last_advance_all)
+		return 0;
+	rdtp->last_advance_all = jiffies;
+
 	for_each_rcu_flavor(rsp) {
 		rdp = this_cpu_ptr(rsp->rda);
 		rnp = rdp->mynode;
@@ -1739,6 +1750,8 @@
 	 */
 	if (rdtp->all_lazy &&
 	    rdtp->nonlazy_posted != rdtp->nonlazy_posted_snap) {
+		rdtp->all_lazy = false;
+		rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
 		invoke_rcu_core();
 		return;
 	}
@@ -1768,17 +1781,11 @@
  */
 static void rcu_cleanup_after_idle(int cpu)
 {
-	struct rcu_data *rdp;
-	struct rcu_state *rsp;
 
 	if (rcu_is_nocb_cpu(cpu))
 		return;
-	rcu_try_advance_all_cbs();
-	for_each_rcu_flavor(rsp) {
-		rdp = per_cpu_ptr(rsp->rda, cpu);
-		if (cpu_has_callbacks_ready_to_invoke(rdp))
-			invoke_rcu_core();
-	}
+	if (rcu_try_advance_all_cbs())
+		invoke_rcu_core();
 }
 
 /*
@@ -2108,15 +2115,22 @@
 
 	/* If we are not being polled and there is a kthread, awaken it ... */
 	t = ACCESS_ONCE(rdp->nocb_kthread);
-	if (rcu_nocb_poll | !t)
+	if (rcu_nocb_poll || !t) {
+		trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
+				    TPS("WakeNotPoll"));
 		return;
+	}
 	len = atomic_long_read(&rdp->nocb_q_count);
 	if (old_rhpp == &rdp->nocb_head) {
 		wake_up(&rdp->nocb_wq); /* ... only if queue was empty ... */
 		rdp->qlen_last_fqs_check = 0;
+		trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu, TPS("WakeEmpty"));
 	} else if (len > rdp->qlen_last_fqs_check + qhimark) {
 		wake_up_process(t); /* ... or if many callbacks queued. */
 		rdp->qlen_last_fqs_check = LONG_MAX / 2;
+		trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu, TPS("WakeOvf"));
+	} else {
+		trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu, TPS("WakeNot"));
 	}
 	return;
 }
@@ -2140,10 +2154,12 @@
 	if (__is_kfree_rcu_offset((unsigned long)rhp->func))
 		trace_rcu_kfree_callback(rdp->rsp->name, rhp,
 					 (unsigned long)rhp->func,
-					 rdp->qlen_lazy, rdp->qlen);
+					 -atomic_long_read(&rdp->nocb_q_count_lazy),
+					 -atomic_long_read(&rdp->nocb_q_count));
 	else
 		trace_rcu_callback(rdp->rsp->name, rhp,
-				   rdp->qlen_lazy, rdp->qlen);
+				   -atomic_long_read(&rdp->nocb_q_count_lazy),
+				   -atomic_long_read(&rdp->nocb_q_count));
 	return 1;
 }
 
@@ -2221,6 +2237,7 @@
 static int rcu_nocb_kthread(void *arg)
 {
 	int c, cl;
+	bool firsttime = 1;
 	struct rcu_head *list;
 	struct rcu_head *next;
 	struct rcu_head **tail;
@@ -2229,14 +2246,27 @@
 	/* Each pass through this loop invokes one batch of callbacks */
 	for (;;) {
 		/* If not polling, wait for next batch of callbacks. */
-		if (!rcu_nocb_poll)
+		if (!rcu_nocb_poll) {
+			trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
+					    TPS("Sleep"));
 			wait_event_interruptible(rdp->nocb_wq, rdp->nocb_head);
+		} else if (firsttime) {
+			firsttime = 0;
+			trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
+					    TPS("Poll"));
+		}
 		list = ACCESS_ONCE(rdp->nocb_head);
 		if (!list) {
+			if (!rcu_nocb_poll)
+				trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
+						    TPS("WokeEmpty"));
 			schedule_timeout_interruptible(1);
 			flush_signals(current);
 			continue;
 		}
+		firsttime = 1;
+		trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
+				    TPS("WokeNonEmpty"));
 
 		/*
 		 * Extract queued callbacks, update counts, and wait
@@ -2257,7 +2287,11 @@
 			next = list->next;
 			/* Wait for enqueuing to complete, if needed. */
 			while (next == NULL && &list->next != tail) {
+				trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
+						    TPS("WaitQueue"));
 				schedule_timeout_interruptible(1);
+				trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
+						    TPS("WokeQueue"));
 				next = list->next;
 			}
 			debug_rcu_head_unqueue(list);
diff --git a/kernel/rcutree_trace.c b/kernel/rcu/tree_trace.c
similarity index 99%
rename from kernel/rcutree_trace.c
rename to kernel/rcu/tree_trace.c
index cf6c174..3596797 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcu/tree_trace.c
@@ -44,7 +44,7 @@
 #include <linux/seq_file.h>
 
 #define RCU_TREE_NONCORE
-#include "rcutree.h"
+#include "tree.h"
 
 static int r_open(struct inode *inode, struct file *file,
 					const struct seq_operations *op)
diff --git a/kernel/rcupdate.c b/kernel/rcu/update.c
similarity index 97%
rename from kernel/rcupdate.c
rename to kernel/rcu/update.c
index b02a339..6cb3dff 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcu/update.c
@@ -53,6 +53,12 @@
 
 #include "rcu.h"
 
+MODULE_ALIAS("rcupdate");
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "rcupdate."
+
 module_param(rcu_expedited, int, 0);
 
 #ifdef CONFIG_PREEMPT_RCU
@@ -148,7 +154,7 @@
 {
 	if (!debug_lockdep_rcu_enabled())
 		return 1;
-	if (rcu_is_cpu_idle())
+	if (!rcu_is_watching())
 		return 0;
 	if (!rcu_lockdep_current_cpu_online())
 		return 0;
@@ -298,7 +304,7 @@
 #endif
 
 int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
-int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
+static int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
 
 module_param(rcu_cpu_stall_suppress, int, 0644);
 module_param(rcu_cpu_stall_timeout, int, 0644);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index dcab1d3..b249883 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -29,7 +29,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/irq.h>
 
-#include <asm/irq.h>
 /*
    - No shared variables, all the data are CPU local.
    - If a softirq needs serialization, let it serialize itself
@@ -134,7 +133,6 @@
 
 static void __local_bh_enable(unsigned int cnt)
 {
-	WARN_ON_ONCE(in_irq());
 	WARN_ON_ONCE(!irqs_disabled());
 
 	if (softirq_count() == cnt)
@@ -149,6 +147,7 @@
  */
 void _local_bh_enable(void)
 {
+	WARN_ON_ONCE(in_irq());
 	__local_bh_enable(SOFTIRQ_DISABLE_OFFSET);
 }
 
@@ -171,8 +170,13 @@
  	 */
 	preempt_count_sub(SOFTIRQ_DISABLE_OFFSET - 1);
 
-	if (unlikely(!in_interrupt() && local_softirq_pending()))
+	if (unlikely(!in_interrupt() && local_softirq_pending())) {
+		/*
+		 * Run softirq if any pending. And do it in its own stack
+		 * as we may be calling this deep in a task call stack already.
+		 */
 		do_softirq();
+	}
 
 	preempt_count_dec();
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -280,10 +284,11 @@
 
 	account_irq_exit_time(current);
 	__local_bh_enable(SOFTIRQ_OFFSET);
+	WARN_ON_ONCE(in_interrupt());
 	tsk_restore_flags(current, old_flags, PF_MEMALLOC);
 }
 
-#ifndef __ARCH_HAS_DO_SOFTIRQ
+
 
 asmlinkage void do_softirq(void)
 {
@@ -298,13 +303,11 @@
 	pending = local_softirq_pending();
 
 	if (pending)
-		__do_softirq();
+		do_softirq_own_stack();
 
 	local_irq_restore(flags);
 }
 
-#endif
-
 /*
  * Enter an interrupt context.
  */
@@ -329,15 +332,21 @@
 static inline void invoke_softirq(void)
 {
 	if (!force_irqthreads) {
+#ifdef CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
 		/*
 		 * We can safely execute softirq on the current stack if
 		 * it is the irq stack, because it should be near empty
-		 * at this stage. But we have no way to know if the arch
-		 * calls irq_exit() on the irq stack. So call softirq
-		 * in its own stack to prevent from any overrun on top
-		 * of a potentially deep task stack.
+		 * at this stage.
 		 */
-		do_softirq();
+		__do_softirq();
+#else
+		/*
+		 * Otherwise, irq_exit() is called on the task stack that can
+		 * be potentially deep already. So call softirq in its own stack
+		 * to prevent from any overrun.
+		 */
+		do_softirq_own_stack();
+#endif
 	} else {
 		wakeup_softirqd();
 	}
@@ -771,6 +780,10 @@
 {
 	local_irq_disable();
 	if (local_softirq_pending()) {
+		/*
+		 * We can safely run softirq on inline stack, as we are not deep
+		 * in the task stack here.
+		 */
 		__do_softirq();
 		rcu_note_context_switch(cpu);
 		local_irq_enable();
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index a159e1f..36547dd 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -190,7 +190,7 @@
 
 #ifdef CONFIG_MAGIC_SYSRQ
 /* Note: sysrq code uses it's own private copy */
-static int __sysrq_enabled = SYSRQ_DEFAULT_ENABLE;
+static int __sysrq_enabled = CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE;
 
 static int sysrq_sysctl_handler(ctl_table *table, int write,
 				void __user *buffer, size_t *lenp,
@@ -1056,6 +1056,7 @@
 		.maxlen		= sizeof(sysctl_perf_event_sample_rate),
 		.mode		= 0644,
 		.proc_handler	= perf_proc_update_handler,
+		.extra1		= &one,
 	},
 	{
 		.procname	= "perf_cpu_time_max_percent",
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index 80c36bc..78e27e3 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -26,7 +26,7 @@
 {
 	/* The ftrace function trace is allowed only for root. */
 	if (ftrace_event_is_function(tp_event) &&
-	    perf_paranoid_kernel() && !capable(CAP_SYS_ADMIN))
+	    perf_paranoid_tracepoint_raw() && !capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
 	/* No tracing, just counting, so no obvious leak */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 094f315..ebef88f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -312,6 +312,15 @@
 	  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
 	  unless you really know what this hack does.
 
+config MAGIC_SYSRQ_DEFAULT_ENABLE
+	hex "Enable magic SysRq key functions by default"
+	depends on MAGIC_SYSRQ
+	default 0x1
+	help
+	  Specifies which SysRq key functions are enabled by default.
+	  This may be set to 1 or 0 to enable or disable them all, or
+	  to a bitmask as described in Documentation/sysrq.txt.
+
 config DEBUG_KERNEL
 	bool "Kernel debugging"
 	help
diff --git a/lib/kobject.c b/lib/kobject.c
index 084f7b1..5b4b888 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -13,11 +13,30 @@
  */
 
 #include <linux/kobject.h>
+#include <linux/kobj_completion.h>
 #include <linux/string.h>
 #include <linux/export.h>
 #include <linux/stat.h>
 #include <linux/slab.h>
 
+/**
+ * kobject_namespace - return @kobj's namespace tag
+ * @kobj: kobject in question
+ *
+ * Returns namespace tag of @kobj if its parent has namespace ops enabled
+ * and thus @kobj should have a namespace tag associated with it.  Returns
+ * %NULL otherwise.
+ */
+const void *kobject_namespace(struct kobject *kobj)
+{
+	const struct kobj_ns_type_operations *ns_ops = kobj_ns_ops(kobj);
+
+	if (!ns_ops || ns_ops->type == KOBJ_NS_TYPE_NONE)
+		return NULL;
+
+	return kobj->ktype->namespace(kobj);
+}
+
 /*
  * populate_dir - populate directory with attributes.
  * @kobj: object we're working on.
@@ -46,13 +65,21 @@
 
 static int create_dir(struct kobject *kobj)
 {
-	int error = 0;
-	error = sysfs_create_dir(kobj);
+	int error;
+
+	error = sysfs_create_dir_ns(kobj, kobject_namespace(kobj));
 	if (!error) {
 		error = populate_dir(kobj);
 		if (error)
 			sysfs_remove_dir(kobj);
 	}
+
+	/*
+	 * @kobj->sd may be deleted by an ancestor going away.  Hold an
+	 * extra reference so that it stays until @kobj is gone.
+	 */
+	sysfs_get(kobj->sd);
+
 	return error;
 }
 
@@ -428,7 +455,7 @@
 		goto out;
 	}
 
-	error = sysfs_rename_dir(kobj, new_name);
+	error = sysfs_rename_dir_ns(kobj, new_name, kobject_namespace(kobj));
 	if (error)
 		goto out;
 
@@ -472,6 +499,7 @@
 		if (kobj->kset)
 			new_parent = kobject_get(&kobj->kset->kobj);
 	}
+
 	/* old object path */
 	devpath = kobject_get_path(kobj, GFP_KERNEL);
 	if (!devpath) {
@@ -486,7 +514,7 @@
 	sprintf(devpath_string, "DEVPATH_OLD=%s", devpath);
 	envp[0] = devpath_string;
 	envp[1] = NULL;
-	error = sysfs_move_dir(kobj, new_parent);
+	error = sysfs_move_dir_ns(kobj, new_parent, kobject_namespace(kobj));
 	if (error)
 		goto out;
 	old_parent = kobj->parent;
@@ -508,10 +536,15 @@
  */
 void kobject_del(struct kobject *kobj)
 {
+	struct sysfs_dirent *sd;
+
 	if (!kobj)
 		return;
 
+	sd = kobj->sd;
 	sysfs_remove_dir(kobj);
+	sysfs_put(sd);
+
 	kobj->state_in_sysfs = 0;
 	kobj_kset_leave(kobj);
 	kobject_put(kobj->parent);
@@ -727,6 +760,55 @@
 };
 
 /**
+ * kobj_completion_init - initialize a kobj_completion object.
+ * @kc: kobj_completion
+ * @ktype: type of kobject to initialize
+ *
+ * kobj_completion structures can be embedded within structures with different
+ * lifetime rules.  During the release of the enclosing object, we can
+ * wait on the release of the kobject so that we don't free it while it's
+ * still busy.
+ */
+void kobj_completion_init(struct kobj_completion *kc, struct kobj_type *ktype)
+{
+	init_completion(&kc->kc_unregister);
+	kobject_init(&kc->kc_kobj, ktype);
+}
+EXPORT_SYMBOL_GPL(kobj_completion_init);
+
+/**
+ * kobj_completion_release - release a kobj_completion object
+ * @kobj: kobject embedded in kobj_completion
+ *
+ * Used with kobject_release to notify waiters that the kobject has been
+ * released.
+ */
+void kobj_completion_release(struct kobject *kobj)
+{
+	struct kobj_completion *kc = kobj_to_kobj_completion(kobj);
+	complete(&kc->kc_unregister);
+}
+EXPORT_SYMBOL_GPL(kobj_completion_release);
+
+/**
+ * kobj_completion_del_and_wait - release the kobject and wait for it
+ * @kc: kobj_completion object to release
+ *
+ * Delete the kobject from sysfs and drop the reference count.  Then wait
+ * until any other outstanding references are also dropped.  This routine
+ * is only necessary once other references may have been taken on the
+ * kobject.  Typically this happens when the kobject has been published
+ * to sysfs via kobject_add.
+ */
+void kobj_completion_del_and_wait(struct kobj_completion *kc)
+{
+	kobject_del(&kc->kc_kobj);
+	kobject_put(&kc->kc_kobj);
+	wait_for_completion(&kc->kc_unregister);
+}
+EXPORT_SYMBOL_GPL(kobj_completion_del_and_wait);
+
+/**
  * kset_register - initialize and add a kset.
  * @k: kset.
  */
diff --git a/lib/lockref.c b/lib/lockref.c
index 6f9d434..af6e95d 100644
--- a/lib/lockref.c
+++ b/lib/lockref.c
@@ -153,6 +153,7 @@
 	assert_spin_locked(&lockref->lock);
 	lockref->count = -128;
 }
+EXPORT_SYMBOL(lockref_mark_dead);
 
 /**
  * lockref_get_not_dead - Increments count unless the ref is dead
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a685c8a..d16fa29 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -577,7 +577,8 @@
 		miter->__offset += miter->consumed;
 		miter->__remaining -= miter->consumed;
 
-		if (miter->__flags & SG_MITER_TO_SG)
+		if ((miter->__flags & SG_MITER_TO_SG) &&
+		    !PageSlab(miter->page))
 			flush_kernel_dcache_page(miter->page);
 
 		if (miter->__flags & SG_MITER_ATOMIC) {
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 497ec33..13b9d0f 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -54,6 +54,7 @@
 #include <linux/page_cgroup.h>
 #include <linux/cpu.h>
 #include <linux/oom.h>
+#include <linux/lockdep.h>
 #include "internal.h"
 #include <net/sock.h>
 #include <net/ip.h>
@@ -2046,6 +2047,12 @@
 	return total;
 }
 
+#ifdef CONFIG_LOCKDEP
+static struct lockdep_map memcg_oom_lock_dep_map = {
+	.name = "memcg_oom_lock",
+};
+#endif
+
 static DEFINE_SPINLOCK(memcg_oom_lock);
 
 /*
@@ -2083,7 +2090,8 @@
 			}
 			iter->oom_lock = false;
 		}
-	}
+	} else
+		mutex_acquire(&memcg_oom_lock_dep_map, 0, 1, _RET_IP_);
 
 	spin_unlock(&memcg_oom_lock);
 
@@ -2095,6 +2103,7 @@
 	struct mem_cgroup *iter;
 
 	spin_lock(&memcg_oom_lock);
+	mutex_release(&memcg_oom_lock_dep_map, 1, _RET_IP_);
 	for_each_mem_cgroup_tree(iter, memcg)
 		iter->oom_lock = false;
 	spin_unlock(&memcg_oom_lock);
@@ -2765,10 +2774,10 @@
 	*ptr = memcg;
 	return 0;
 nomem:
-	*ptr = NULL;
-	if (gfp_mask & __GFP_NOFAIL)
-		return 0;
-	return -ENOMEM;
+	if (!(gfp_mask & __GFP_NOFAIL)) {
+		*ptr = NULL;
+		return -ENOMEM;
+	}
 bypass:
 	*ptr = root_mem_cgroup;
 	return -EINTR;
@@ -3773,7 +3782,6 @@
 {
 	/* Update stat data for mem_cgroup */
 	preempt_disable();
-	WARN_ON_ONCE(from->stat->count[idx] < nr_pages);
 	__this_cpu_sub(from->stat->count[idx], nr_pages);
 	__this_cpu_add(to->stat->count[idx], nr_pages);
 	preempt_enable();
@@ -4950,31 +4958,18 @@
 	} while (usage > 0);
 }
 
-/*
- * This mainly exists for tests during the setting of set of use_hierarchy.
- * Since this is the very setting we are changing, the current hierarchy value
- * is meaningless
- */
-static inline bool __memcg_has_children(struct mem_cgroup *memcg)
-{
-	struct cgroup_subsys_state *pos;
-
-	/* bounce at first found */
-	css_for_each_child(pos, &memcg->css)
-		return true;
-	return false;
-}
-
-/*
- * Must be called with memcg_create_mutex held, unless the cgroup is guaranteed
- * to be already dead (as in mem_cgroup_force_empty, for instance).  This is
- * from mem_cgroup_count_children(), in the sense that we don't really care how
- * many children we have; we only need to know if we have any.  It also counts
- * any memcg without hierarchy as infertile.
- */
 static inline bool memcg_has_children(struct mem_cgroup *memcg)
 {
-	return memcg->use_hierarchy && __memcg_has_children(memcg);
+	lockdep_assert_held(&memcg_create_mutex);
+	/*
+	 * The lock does not prevent addition or deletion to the list
+	 * of children, but it prevents a new child from being
+	 * initialized based on this parent in css_online(), so it's
+	 * enough to decide whether hierarchically inherited
+	 * attributes can still be changed or not.
+	 */
+	return memcg->use_hierarchy &&
+		!list_empty(&memcg->css.cgroup->children);
 }
 
 /*
@@ -5054,7 +5049,7 @@
 	 */
 	if ((!parent_memcg || !parent_memcg->use_hierarchy) &&
 				(val == 1 || val == 0)) {
-		if (!__memcg_has_children(memcg))
+		if (list_empty(&memcg->css.cgroup->children))
 			memcg->use_hierarchy = val;
 		else
 			retval = -EBUSY;
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index ca04163..e6b7fec 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -64,7 +64,7 @@
 			br_flood_deliver(br, skb, false);
 			goto out;
 		}
-		if (br_multicast_rcv(br, NULL, skb)) {
+		if (br_multicast_rcv(br, NULL, skb, vid)) {
 			kfree_skb(skb);
 			goto out;
 		}
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index a2fd37e..7e73c32 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -80,7 +80,7 @@
 		br_fdb_update(br, p, eth_hdr(skb)->h_source, vid);
 
 	if (!is_broadcast_ether_addr(dest) && is_multicast_ether_addr(dest) &&
-	    br_multicast_rcv(br, p, skb))
+	    br_multicast_rcv(br, p, skb, vid))
 		goto drop;
 
 	if (p->state == BR_STATE_LEARNING)
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 8b0b610..686284f 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -947,7 +947,8 @@
 
 static int br_ip4_multicast_igmp3_report(struct net_bridge *br,
 					 struct net_bridge_port *port,
-					 struct sk_buff *skb)
+					 struct sk_buff *skb,
+					 u16 vid)
 {
 	struct igmpv3_report *ih;
 	struct igmpv3_grec *grec;
@@ -957,12 +958,10 @@
 	int type;
 	int err = 0;
 	__be32 group;
-	u16 vid = 0;
 
 	if (!pskb_may_pull(skb, sizeof(*ih)))
 		return -EINVAL;
 
-	br_vlan_get_tag(skb, &vid);
 	ih = igmpv3_report_hdr(skb);
 	num = ntohs(ih->ngrec);
 	len = sizeof(*ih);
@@ -1005,7 +1004,8 @@
 #if IS_ENABLED(CONFIG_IPV6)
 static int br_ip6_multicast_mld2_report(struct net_bridge *br,
 					struct net_bridge_port *port,
-					struct sk_buff *skb)
+					struct sk_buff *skb,
+					u16 vid)
 {
 	struct icmp6hdr *icmp6h;
 	struct mld2_grec *grec;
@@ -1013,12 +1013,10 @@
 	int len;
 	int num;
 	int err = 0;
-	u16 vid = 0;
 
 	if (!pskb_may_pull(skb, sizeof(*icmp6h)))
 		return -EINVAL;
 
-	br_vlan_get_tag(skb, &vid);
 	icmp6h = icmp6_hdr(skb);
 	num = ntohs(icmp6h->icmp6_dataun.un_data16[1]);
 	len = sizeof(*icmp6h);
@@ -1141,7 +1139,8 @@
 
 static int br_ip4_multicast_query(struct net_bridge *br,
 				  struct net_bridge_port *port,
-				  struct sk_buff *skb)
+				  struct sk_buff *skb,
+				  u16 vid)
 {
 	const struct iphdr *iph = ip_hdr(skb);
 	struct igmphdr *ih = igmp_hdr(skb);
@@ -1153,7 +1152,6 @@
 	unsigned long now = jiffies;
 	__be32 group;
 	int err = 0;
-	u16 vid = 0;
 
 	spin_lock(&br->multicast_lock);
 	if (!netif_running(br->dev) ||
@@ -1189,7 +1187,6 @@
 	if (!group)
 		goto out;
 
-	br_vlan_get_tag(skb, &vid);
 	mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group, vid);
 	if (!mp)
 		goto out;
@@ -1219,7 +1216,8 @@
 #if IS_ENABLED(CONFIG_IPV6)
 static int br_ip6_multicast_query(struct net_bridge *br,
 				  struct net_bridge_port *port,
-				  struct sk_buff *skb)
+				  struct sk_buff *skb,
+				  u16 vid)
 {
 	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
 	struct mld_msg *mld;
@@ -1231,7 +1229,6 @@
 	unsigned long now = jiffies;
 	const struct in6_addr *group = NULL;
 	int err = 0;
-	u16 vid = 0;
 
 	spin_lock(&br->multicast_lock);
 	if (!netif_running(br->dev) ||
@@ -1265,7 +1262,6 @@
 	if (!group)
 		goto out;
 
-	br_vlan_get_tag(skb, &vid);
 	mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group, vid);
 	if (!mp)
 		goto out;
@@ -1439,7 +1435,8 @@
 
 static int br_multicast_ipv4_rcv(struct net_bridge *br,
 				 struct net_bridge_port *port,
-				 struct sk_buff *skb)
+				 struct sk_buff *skb,
+				 u16 vid)
 {
 	struct sk_buff *skb2 = skb;
 	const struct iphdr *iph;
@@ -1447,7 +1444,6 @@
 	unsigned int len;
 	unsigned int offset;
 	int err;
-	u16 vid = 0;
 
 	/* We treat OOM as packet loss for now. */
 	if (!pskb_may_pull(skb, sizeof(*iph)))
@@ -1508,7 +1504,6 @@
 
 	err = 0;
 
-	br_vlan_get_tag(skb2, &vid);
 	BR_INPUT_SKB_CB(skb)->igmp = 1;
 	ih = igmp_hdr(skb2);
 
@@ -1519,10 +1514,10 @@
 		err = br_ip4_multicast_add_group(br, port, ih->group, vid);
 		break;
 	case IGMPV3_HOST_MEMBERSHIP_REPORT:
-		err = br_ip4_multicast_igmp3_report(br, port, skb2);
+		err = br_ip4_multicast_igmp3_report(br, port, skb2, vid);
 		break;
 	case IGMP_HOST_MEMBERSHIP_QUERY:
-		err = br_ip4_multicast_query(br, port, skb2);
+		err = br_ip4_multicast_query(br, port, skb2, vid);
 		break;
 	case IGMP_HOST_LEAVE_MESSAGE:
 		br_ip4_multicast_leave_group(br, port, ih->group, vid);
@@ -1540,7 +1535,8 @@
 #if IS_ENABLED(CONFIG_IPV6)
 static int br_multicast_ipv6_rcv(struct net_bridge *br,
 				 struct net_bridge_port *port,
-				 struct sk_buff *skb)
+				 struct sk_buff *skb,
+				 u16 vid)
 {
 	struct sk_buff *skb2;
 	const struct ipv6hdr *ip6h;
@@ -1550,7 +1546,6 @@
 	unsigned int len;
 	int offset;
 	int err;
-	u16 vid = 0;
 
 	if (!pskb_may_pull(skb, sizeof(*ip6h)))
 		return -EINVAL;
@@ -1640,7 +1635,6 @@
 
 	err = 0;
 
-	br_vlan_get_tag(skb, &vid);
 	BR_INPUT_SKB_CB(skb)->igmp = 1;
 
 	switch (icmp6_type) {
@@ -1657,10 +1651,10 @@
 		break;
 	    }
 	case ICMPV6_MLD2_REPORT:
-		err = br_ip6_multicast_mld2_report(br, port, skb2);
+		err = br_ip6_multicast_mld2_report(br, port, skb2, vid);
 		break;
 	case ICMPV6_MGM_QUERY:
-		err = br_ip6_multicast_query(br, port, skb2);
+		err = br_ip6_multicast_query(br, port, skb2, vid);
 		break;
 	case ICMPV6_MGM_REDUCTION:
 	    {
@@ -1681,7 +1675,7 @@
 #endif
 
 int br_multicast_rcv(struct net_bridge *br, struct net_bridge_port *port,
-		     struct sk_buff *skb)
+		     struct sk_buff *skb, u16 vid)
 {
 	BR_INPUT_SKB_CB(skb)->igmp = 0;
 	BR_INPUT_SKB_CB(skb)->mrouters_only = 0;
@@ -1691,10 +1685,10 @@
 
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
-		return br_multicast_ipv4_rcv(br, port, skb);
+		return br_multicast_ipv4_rcv(br, port, skb, vid);
 #if IS_ENABLED(CONFIG_IPV6)
 	case htons(ETH_P_IPV6):
-		return br_multicast_ipv6_rcv(br, port, skb);
+		return br_multicast_ipv6_rcv(br, port, skb, vid);
 #endif
 	}
 
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index e14c33b..2e8244e 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -451,7 +451,8 @@
 extern unsigned int br_mdb_rehash_seq;
 extern int br_multicast_rcv(struct net_bridge *br,
 			    struct net_bridge_port *port,
-			    struct sk_buff *skb);
+			    struct sk_buff *skb,
+			    u16 vid);
 extern struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
 					       struct sk_buff *skb, u16 vid);
 extern void br_multicast_add_port(struct net_bridge_port *port);
@@ -522,7 +523,8 @@
 #else
 static inline int br_multicast_rcv(struct net_bridge *br,
 				   struct net_bridge_port *port,
-				   struct sk_buff *skb)
+				   struct sk_buff *skb,
+				   u16 vid)
 {
 	return 0;
 }
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index 5180938..7c470c3 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -181,6 +181,7 @@
 	ub->qlen++;
 
 	pm = nlmsg_data(nlh);
+	memset(pm, 0, sizeof(*pm));
 
 	/* Fill in the ulog data */
 	pm->version = EBT_ULOG_VERSION;
@@ -193,8 +194,6 @@
 	pm->hook = hooknr;
 	if (uloginfo->prefix != NULL)
 		strcpy(pm->prefix, uloginfo->prefix);
-	else
-		*(pm->prefix) = '\0';
 
 	if (in) {
 		strcpy(pm->physindev, in->name);
@@ -204,16 +203,14 @@
 			strcpy(pm->indev, br_port_get_rcu(in)->br->dev->name);
 		else
 			strcpy(pm->indev, in->name);
-	} else
-		pm->indev[0] = pm->physindev[0] = '\0';
+	}
 
 	if (out) {
 		/* If out exists, then out is a bridge port */
 		strcpy(pm->physoutdev, out->name);
 		/* rcu_read_lock()ed by nf_hook_slow */
 		strcpy(pm->outdev, br_port_get_rcu(out)->br->dev->name);
-	} else
-		pm->outdev[0] = pm->physoutdev[0] = '\0';
+	}
 
 	if (skb_copy_bits(skb, -ETH_HLEN, pm->data, copy_len) < 0)
 		BUG();
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index 8d7d0dd..143b6fd 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -40,7 +40,7 @@
 		struct iphdr _iph;
 ip:
 		iph = skb_header_pointer(skb, nhoff, sizeof(_iph), &_iph);
-		if (!iph)
+		if (!iph || iph->ihl < 5)
 			return false;
 
 		if (ip_is_fragment(iph))
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index d954b56..325dee8 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1344,17 +1344,19 @@
 	return error;
 }
 
-int netdev_class_create_file(struct class_attribute *class_attr)
+int netdev_class_create_file_ns(struct class_attribute *class_attr,
+				const void *ns)
 {
-	return class_create_file(&net_class, class_attr);
+	return class_create_file_ns(&net_class, class_attr, ns);
 }
-EXPORT_SYMBOL(netdev_class_create_file);
+EXPORT_SYMBOL(netdev_class_create_file_ns);
 
-void netdev_class_remove_file(struct class_attribute *class_attr)
+void netdev_class_remove_file_ns(struct class_attribute *class_attr,
+				 const void *ns)
 {
-	class_remove_file(&net_class, class_attr);
+	class_remove_file_ns(&net_class, class_attr, ns);
 }
-EXPORT_SYMBOL(netdev_class_remove_file);
+EXPORT_SYMBOL(netdev_class_remove_file_ns);
 
 int netdev_kobject_init(void)
 {
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index fc75c9e..8f97199 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -636,8 +636,9 @@
 
 			netpoll_send_skb(np, send_skb);
 
-			/* If there are several rx_hooks for the same address,
-			   we're fine by sending a single reply */
+			/* If there are several rx_skb_hooks for the same
+			 * address we're fine by sending a single reply
+			 */
 			break;
 		}
 		spin_unlock_irqrestore(&npinfo->rx_lock, flags);
@@ -719,8 +720,9 @@
 
 			netpoll_send_skb(np, send_skb);
 
-			/* If there are several rx_hooks for the same address,
-			   we're fine by sending a single reply */
+			/* If there are several rx_skb_hooks for the same
+			 * address, we're fine by sending a single reply
+			 */
 			break;
 		}
 		spin_unlock_irqrestore(&npinfo->rx_lock, flags);
@@ -756,11 +758,12 @@
 
 int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo)
 {
-	int proto, len, ulen;
-	int hits = 0;
+	int proto, len, ulen, data_len;
+	int hits = 0, offset;
 	const struct iphdr *iph;
 	struct udphdr *uh;
 	struct netpoll *np, *tmp;
+	uint16_t source;
 
 	if (list_empty(&npinfo->rx_np))
 		goto out;
@@ -820,7 +823,10 @@
 
 		len -= iph->ihl*4;
 		uh = (struct udphdr *)(((char *)iph) + iph->ihl*4);
+		offset = (unsigned char *)(uh + 1) - skb->data;
 		ulen = ntohs(uh->len);
+		data_len = skb->len - offset;
+		source = ntohs(uh->source);
 
 		if (ulen != len)
 			goto out;
@@ -834,9 +840,7 @@
 			if (np->local_port && np->local_port != ntohs(uh->dest))
 				continue;
 
-			np->rx_hook(np, ntohs(uh->source),
-				       (char *)(uh+1),
-				       ulen - sizeof(struct udphdr));
+			np->rx_skb_hook(np, source, skb, offset, data_len);
 			hits++;
 		}
 	} else {
@@ -859,7 +863,10 @@
 		if (!pskb_may_pull(skb, sizeof(struct udphdr)))
 			goto out;
 		uh = udp_hdr(skb);
+		offset = (unsigned char *)(uh + 1) - skb->data;
 		ulen = ntohs(uh->len);
+		data_len = skb->len - offset;
+		source = ntohs(uh->source);
 		if (ulen != skb->len)
 			goto out;
 		if (udp6_csum_init(skb, uh, IPPROTO_UDP))
@@ -872,9 +879,7 @@
 			if (np->local_port && np->local_port != ntohs(uh->dest))
 				continue;
 
-			np->rx_hook(np, ntohs(uh->source),
-				       (char *)(uh+1),
-				       ulen - sizeof(struct udphdr));
+			np->rx_skb_hook(np, source, skb, offset, data_len);
 			hits++;
 		}
 #endif
@@ -1062,7 +1067,7 @@
 
 	npinfo->netpoll = np;
 
-	if (np->rx_hook) {
+	if (np->rx_skb_hook) {
 		spin_lock_irqsave(&npinfo->rx_lock, flags);
 		npinfo->rx_flags |= NETPOLL_RX_ENABLED;
 		list_add_tail(&np->rx, &npinfo->rx_np);
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 85a4f21..59da7cd 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -271,6 +271,11 @@
 	local_bh_disable();
 	addend = xt_write_recseq_begin();
 	private = table->private;
+	/*
+	 * Ensure we load private-> members after we've fetched the base
+	 * pointer.
+	 */
+	smp_read_barrier_depends();
 	table_base = private->entries[smp_processor_id()];
 
 	e = get_entry(table_base, private->hook_entry[hook]);
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index d23118d..718dfbd 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -327,6 +327,11 @@
 	addend = xt_write_recseq_begin();
 	private = table->private;
 	cpu        = smp_processor_id();
+	/*
+	 * Ensure we load private-> members after we've fetched the base
+	 * pointer.
+	 */
+	smp_read_barrier_depends();
 	table_base = private->entries[cpu];
 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
 	stackptr   = per_cpu_ptr(private->stackptr, cpu);
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index cbc2215..9cb993c 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -220,6 +220,7 @@
 	ub->qlen++;
 
 	pm = nlmsg_data(nlh);
+	memset(pm, 0, sizeof(*pm));
 
 	/* We might not have a timestamp, get one */
 	if (skb->tstamp.tv64 == 0)
@@ -238,8 +239,6 @@
 	}
 	else if (loginfo->prefix[0] != '\0')
 		strncpy(pm->prefix, loginfo->prefix, sizeof(pm->prefix));
-	else
-		*(pm->prefix) = '\0';
 
 	if (in && in->hard_header_len > 0 &&
 	    skb->mac_header != skb->network_header &&
@@ -251,13 +250,9 @@
 
 	if (in)
 		strncpy(pm->indev_name, in->name, sizeof(pm->indev_name));
-	else
-		pm->indev_name[0] = '\0';
 
 	if (out)
 		strncpy(pm->outdev_name, out->name, sizeof(pm->outdev_name));
-	else
-		pm->outdev_name[0] = '\0';
 
 	/* copy_len <= skb->len, so can't fail. */
 	if (skb_copy_bits(skb, 0, pm->payload, copy_len) < 0)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index a16b01b..068c8fb 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2856,7 +2856,8 @@
 	 * left edge of the send window.
 	 * See draft-ietf-tcplw-high-performance-00, section 3.3.
 	 */
-	if (seq_rtt < 0 && tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr)
+	if (seq_rtt < 0 && tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr &&
+	    flag & FLAG_ACKED)
 		seq_rtt = tcp_time_stamp - tp->rx_opt.rcv_tsecr;
 
 	if (seq_rtt < 0)
@@ -2871,14 +2872,19 @@
 }
 
 /* Compute time elapsed between (last) SYNACK and the ACK completing 3WHS. */
-static void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req)
+static void tcp_synack_rtt_meas(struct sock *sk, const u32 synack_stamp)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	s32 seq_rtt = -1;
 
-	if (tp->lsndtime && !tp->total_retrans)
-		seq_rtt = tcp_time_stamp - tp->lsndtime;
-	tcp_ack_update_rtt(sk, FLAG_SYN_ACKED, seq_rtt, -1);
+	if (synack_stamp && !tp->total_retrans)
+		seq_rtt = tcp_time_stamp - synack_stamp;
+
+	/* If the ACK acks both the SYNACK and the (Fast Open'd) data packets
+	 * sent in SYN_RECV, SYNACK RTT is the smooth RTT computed in tcp_ack()
+	 */
+	if (!tp->srtt)
+		tcp_ack_update_rtt(sk, FLAG_SYN_ACKED, seq_rtt, -1);
 }
 
 static void tcp_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
@@ -2981,6 +2987,7 @@
 	s32 seq_rtt = -1;
 	s32 ca_seq_rtt = -1;
 	ktime_t last_ackt = net_invalid_timestamp();
+	bool rtt_update;
 
 	while ((skb = tcp_write_queue_head(sk)) && skb != tcp_send_head(sk)) {
 		struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
@@ -3057,14 +3064,13 @@
 	if (skb && (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))
 		flag |= FLAG_SACK_RENEGING;
 
-	if (tcp_ack_update_rtt(sk, flag, seq_rtt, sack_rtt) ||
-	    (flag & FLAG_ACKED))
-		tcp_rearm_rto(sk);
+	rtt_update = tcp_ack_update_rtt(sk, flag, seq_rtt, sack_rtt);
 
 	if (flag & FLAG_ACKED) {
 		const struct tcp_congestion_ops *ca_ops
 			= inet_csk(sk)->icsk_ca_ops;
 
+		tcp_rearm_rto(sk);
 		if (unlikely(icsk->icsk_mtup.probe_size &&
 			     !after(tp->mtu_probe.probe_seq_end, tp->snd_una))) {
 			tcp_mtup_probe_success(sk);
@@ -3103,6 +3109,13 @@
 
 			ca_ops->pkts_acked(sk, pkts_acked, rtt_us);
 		}
+	} else if (skb && rtt_update && sack_rtt >= 0 &&
+		   sack_rtt > (s32)(now - TCP_SKB_CB(skb)->when)) {
+		/* Do not re-arm RTO if the sack RTT is measured from data sent
+		 * after when the head was last (re)transmitted. Otherwise the
+		 * timeout may continue to extend in loss recovery.
+		 */
+		tcp_rearm_rto(sk);
 	}
 
 #if FASTRETRANS_DEBUG > 0
@@ -5587,6 +5600,7 @@
 	struct request_sock *req;
 	int queued = 0;
 	bool acceptable;
+	u32 synack_stamp;
 
 	tp->rx_opt.saw_tstamp = 0;
 
@@ -5669,9 +5683,11 @@
 		 * so release it.
 		 */
 		if (req) {
+			synack_stamp = tcp_rsk(req)->snt_synack;
 			tp->total_retrans = req->num_retrans;
 			reqsk_fastopen_remove(sk, req, false);
 		} else {
+			synack_stamp = tp->lsndtime;
 			/* Make sure socket is routed, for correct metrics. */
 			icsk->icsk_af_ops->rebuild_header(sk);
 			tcp_init_congestion_control(sk);
@@ -5694,7 +5710,7 @@
 		tp->snd_una = TCP_SKB_CB(skb)->ack_seq;
 		tp->snd_wnd = ntohs(th->window) << tp->rx_opt.snd_wscale;
 		tcp_init_wl(tp, TCP_SKB_CB(skb)->seq);
-		tcp_synack_rtt_meas(sk, req);
+		tcp_synack_rtt_meas(sk, synack_stamp);
 
 		if (tp->rx_opt.tstamp_ok)
 			tp->advmss -= TCPOLEN_TSTAMP_ALIGNED;
diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
index 3a7525e..533c58a 100644
--- a/net/ipv4/tcp_offload.c
+++ b/net/ipv4/tcp_offload.c
@@ -18,6 +18,7 @@
 				netdev_features_t features)
 {
 	struct sk_buff *segs = ERR_PTR(-EINVAL);
+	unsigned int sum_truesize = 0;
 	struct tcphdr *th;
 	unsigned int thlen;
 	unsigned int seq;
@@ -102,13 +103,7 @@
 		if (copy_destructor) {
 			skb->destructor = gso_skb->destructor;
 			skb->sk = gso_skb->sk;
-			/* {tcp|sock}_wfree() use exact truesize accounting :
-			 * sum(skb->truesize) MUST be exactly be gso_skb->truesize
-			 * So we account mss bytes of 'true size' for each segment.
-			 * The last segment will contain the remaining.
-			 */
-			skb->truesize = mss;
-			gso_skb->truesize -= mss;
+			sum_truesize += skb->truesize;
 		}
 		skb = skb->next;
 		th = tcp_hdr(skb);
@@ -125,7 +120,9 @@
 	if (copy_destructor) {
 		swap(gso_skb->sk, skb->sk);
 		swap(gso_skb->destructor, skb->destructor);
-		swap(gso_skb->truesize, skb->truesize);
+		sum_truesize += skb->truesize;
+		atomic_add(sum_truesize - gso_skb->truesize,
+			   &skb->sk->sk_wmem_alloc);
 	}
 
 	delta = htonl(oldlen + (skb_tail_pointer(skb) -
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index ccde542..e1a6393 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -104,10 +104,14 @@
 	const struct iphdr *iph = ip_hdr(skb);
 	u8 *xprth = skb_network_header(skb) + iph->ihl * 4;
 	struct flowi4 *fl4 = &fl->u.ip4;
+	int oif = 0;
+
+	if (skb_dst(skb))
+		oif = skb_dst(skb)->dev->ifindex;
 
 	memset(fl4, 0, sizeof(struct flowi4));
 	fl4->flowi4_mark = skb->mark;
-	fl4->flowi4_oif = skb_dst(skb)->dev->ifindex;
+	fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
 
 	if (!ip_is_fragment(iph)) {
 		switch (iph->protocol) {
@@ -236,7 +240,7 @@
 	.destroy =		xfrm4_dst_destroy,
 	.ifdown =		xfrm4_dst_ifdown,
 	.local_out =		__ip_local_out,
-	.gc_thresh =		1024,
+	.gc_thresh =		32768,
 };
 
 static struct xfrm_policy_afinfo xfrm4_policy_afinfo = {
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 44400c2..710238f 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -349,6 +349,11 @@
 	local_bh_disable();
 	addend = xt_write_recseq_begin();
 	private = table->private;
+	/*
+	 * Ensure we load private-> members after we've fetched the base
+	 * pointer.
+	 */
+	smp_read_barrier_depends();
 	cpu        = smp_processor_id();
 	table_base = private->entries[cpu];
 	jumpstack  = (struct ip6t_entry **)private->jumpstack[cpu];
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index f54e3a1..04e17b3 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1087,10 +1087,13 @@
 	if (rt->rt6i_genid != rt_genid_ipv6(dev_net(rt->dst.dev)))
 		return NULL;
 
-	if (rt->rt6i_node && (rt->rt6i_node->fn_sernum == cookie))
-		return dst;
+	if (!rt->rt6i_node || (rt->rt6i_node->fn_sernum != cookie))
+		return NULL;
 
-	return NULL;
+	if (rt6_check_expired(rt))
+		return NULL;
+
+	return dst;
 }
 
 static struct dst_entry *ip6_negative_advice(struct dst_entry *dst)
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 08ed277..5f8e128 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -135,10 +135,14 @@
 	struct ipv6_opt_hdr *exthdr;
 	const unsigned char *nh = skb_network_header(skb);
 	u8 nexthdr = nh[IP6CB(skb)->nhoff];
+	int oif = 0;
+
+	if (skb_dst(skb))
+		oif = skb_dst(skb)->dev->ifindex;
 
 	memset(fl6, 0, sizeof(struct flowi6));
 	fl6->flowi6_mark = skb->mark;
-	fl6->flowi6_oif = skb_dst(skb)->dev->ifindex;
+	fl6->flowi6_oif = reverse ? skb->skb_iif : oif;
 
 	fl6->daddr = reverse ? hdr->saddr : hdr->daddr;
 	fl6->saddr = reverse ? hdr->daddr : hdr->saddr;
@@ -285,7 +289,7 @@
 	.destroy =		xfrm6_dst_destroy,
 	.ifdown =		xfrm6_dst_ifdown,
 	.local_out =		__ip6_local_out,
-	.gc_thresh =		1024,
+	.gc_thresh =		32768,
 };
 
 static struct xfrm_policy_afinfo xfrm6_policy_afinfo = {
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 8b03028..227aa11 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -845,8 +845,13 @@
 		return NULL;
 	}
 
-	table->private = newinfo;
 	newinfo->initial_entries = private->initial_entries;
+	/*
+	 * Ensure contents of newinfo are visible before assigning to
+	 * private.
+	 */
+	smp_wmb();
+	table->private = newinfo;
 
 	/*
 	 * Even though table entries have now been swapped, other CPU's
diff --git a/net/netfilter/xt_NFQUEUE.c b/net/netfilter/xt_NFQUEUE.c
index 1e2fae3..ed00fef 100644
--- a/net/netfilter/xt_NFQUEUE.c
+++ b/net/netfilter/xt_NFQUEUE.c
@@ -147,6 +147,7 @@
 {
 	const struct xt_NFQ_info_v3 *info = par->targinfo;
 	u32 queue = info->queuenum;
+	int ret;
 
 	if (info->queues_total > 1) {
 		if (info->flags & NFQ_FLAG_CPU_FANOUT) {
@@ -157,7 +158,11 @@
 			queue = nfqueue_hash(skb, par);
 	}
 
-	return NF_QUEUE_NR(queue);
+	ret = NF_QUEUE_NR(queue);
+	if (info->flags & NFQ_FLAG_BYPASS)
+		ret |= NF_VERDICT_FLAG_QUEUE_BYPASS;
+
+	return ret;
 }
 
 static struct xt_target nfqueue_tg_reg[] __read_mostly = {
diff --git a/net/openvswitch/dp_notify.c b/net/openvswitch/dp_notify.c
index c323567..5c2dab2 100644
--- a/net/openvswitch/dp_notify.c
+++ b/net/openvswitch/dp_notify.c
@@ -65,8 +65,7 @@
 					continue;
 
 				netdev_vport = netdev_vport_priv(vport);
-				if (netdev_vport->dev->reg_state == NETREG_UNREGISTERED ||
-				    netdev_vport->dev->reg_state == NETREG_UNREGISTERING)
+				if (!(netdev_vport->dev->priv_flags & IFF_OVS_DATAPATH))
 					dp_detach_port_notify(vport);
 			}
 		}
@@ -88,6 +87,10 @@
 		return NOTIFY_DONE;
 
 	if (event == NETDEV_UNREGISTER) {
+		/* upper_dev_unlink and decrement promisc immediately */
+		ovs_netdev_detach_dev(vport);
+
+		/* schedule vport destroy, dev_put and genl notification */
 		ovs_net = net_generic(dev_net(dev), ovs_net_id);
 		queue_work(system_wq, &ovs_net->dp_notify_work);
 	}
diff --git a/net/openvswitch/vport-netdev.c b/net/openvswitch/vport-netdev.c
index 09d93c1..d21f77d 100644
--- a/net/openvswitch/vport-netdev.c
+++ b/net/openvswitch/vport-netdev.c
@@ -150,15 +150,25 @@
 	ovs_vport_free(vport_from_priv(netdev_vport));
 }
 
+void ovs_netdev_detach_dev(struct vport *vport)
+{
+	struct netdev_vport *netdev_vport = netdev_vport_priv(vport);
+
+	ASSERT_RTNL();
+	netdev_vport->dev->priv_flags &= ~IFF_OVS_DATAPATH;
+	netdev_rx_handler_unregister(netdev_vport->dev);
+	netdev_upper_dev_unlink(netdev_vport->dev,
+				netdev_master_upper_dev_get(netdev_vport->dev));
+	dev_set_promiscuity(netdev_vport->dev, -1);
+}
+
 static void netdev_destroy(struct vport *vport)
 {
 	struct netdev_vport *netdev_vport = netdev_vport_priv(vport);
 
 	rtnl_lock();
-	netdev_vport->dev->priv_flags &= ~IFF_OVS_DATAPATH;
-	netdev_rx_handler_unregister(netdev_vport->dev);
-	netdev_upper_dev_unlink(netdev_vport->dev, get_dpdev(vport->dp));
-	dev_set_promiscuity(netdev_vport->dev, -1);
+	if (netdev_vport->dev->priv_flags & IFF_OVS_DATAPATH)
+		ovs_netdev_detach_dev(vport);
 	rtnl_unlock();
 
 	call_rcu(&netdev_vport->rcu, free_port_rcu);
diff --git a/net/openvswitch/vport-netdev.h b/net/openvswitch/vport-netdev.h
index dd298b5..8df01c11 100644
--- a/net/openvswitch/vport-netdev.h
+++ b/net/openvswitch/vport-netdev.h
@@ -39,5 +39,6 @@
 }
 
 const char *ovs_netdev_get_name(const struct vport *);
+void ovs_netdev_detach_dev(struct vport *);
 
 #endif /* vport_netdev.h */
diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c
index a9dfdda..fdc041c 100644
--- a/net/sched/sch_fq.c
+++ b/net/sched/sch_fq.c
@@ -255,6 +255,7 @@
 				     f->socket_hash != sk->sk_hash)) {
 				f->credit = q->initial_quantum;
 				f->socket_hash = sk->sk_hash;
+				f->time_next_packet = 0ULL;
 			}
 			return f;
 		}
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index e7b2d4f..96a5591 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -279,7 +279,9 @@
 		sctp_v6_to_addr(&dst_saddr, &fl6->saddr, htons(bp->port));
 		rcu_read_lock();
 		list_for_each_entry_rcu(laddr, &bp->address_list, list) {
-			if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
+			if (!laddr->valid || laddr->state == SCTP_ADDR_DEL ||
+			    (laddr->state != SCTP_ADDR_SRC &&
+			     !asoc->src_out_of_asoc_ok))
 				continue;
 
 			/* Do not compare against v4 addrs */
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 666c668..1a6eef3 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -860,7 +860,6 @@
 	    (!asoc->temp) && (sk->sk_shutdown != SHUTDOWN_MASK))
 		return;
 
-	BUG_ON(asoc->peer.primary_path == NULL);
 	sctp_unhash_established(asoc);
 	sctp_association_free(asoc);
 }
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 0846566..97912b4 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -420,41 +420,53 @@
 	memcpy(gss_msg->databuf, &uid, sizeof(uid));
 	gss_msg->msg.data = gss_msg->databuf;
 	gss_msg->msg.len = sizeof(uid);
-	BUG_ON(sizeof(uid) > UPCALL_BUF_LEN);
+
+	BUILD_BUG_ON(sizeof(uid) > sizeof(gss_msg->databuf));
 }
 
-static void gss_encode_v1_msg(struct gss_upcall_msg *gss_msg,
+static int gss_encode_v1_msg(struct gss_upcall_msg *gss_msg,
 				const char *service_name,
 				const char *target_name)
 {
 	struct gss_api_mech *mech = gss_msg->auth->mech;
 	char *p = gss_msg->databuf;
-	int len = 0;
+	size_t buflen = sizeof(gss_msg->databuf);
+	int len;
 
-	gss_msg->msg.len = sprintf(gss_msg->databuf, "mech=%s uid=%d ",
-				   mech->gm_name,
-				   from_kuid(&init_user_ns, gss_msg->uid));
-	p += gss_msg->msg.len;
+	len = scnprintf(p, buflen, "mech=%s uid=%d ", mech->gm_name,
+			from_kuid(&init_user_ns, gss_msg->uid));
+	buflen -= len;
+	p += len;
+	gss_msg->msg.len = len;
 	if (target_name) {
-		len = sprintf(p, "target=%s ", target_name);
+		len = scnprintf(p, buflen, "target=%s ", target_name);
+		buflen -= len;
 		p += len;
 		gss_msg->msg.len += len;
 	}
 	if (service_name != NULL) {
-		len = sprintf(p, "service=%s ", service_name);
+		len = scnprintf(p, buflen, "service=%s ", service_name);
+		buflen -= len;
 		p += len;
 		gss_msg->msg.len += len;
 	}
 	if (mech->gm_upcall_enctypes) {
-		len = sprintf(p, "enctypes=%s ", mech->gm_upcall_enctypes);
+		len = scnprintf(p, buflen, "enctypes=%s ",
+				mech->gm_upcall_enctypes);
+		buflen -= len;
 		p += len;
 		gss_msg->msg.len += len;
 	}
-	len = sprintf(p, "\n");
+	len = scnprintf(p, buflen, "\n");
+	if (len == 0)
+		goto out_overflow;
 	gss_msg->msg.len += len;
 
 	gss_msg->msg.data = gss_msg->databuf;
-	BUG_ON(gss_msg->msg.len > UPCALL_BUF_LEN);
+	return 0;
+out_overflow:
+	WARN_ON_ONCE(1);
+	return -ENOMEM;
 }
 
 static struct gss_upcall_msg *
@@ -463,15 +475,15 @@
 {
 	struct gss_upcall_msg *gss_msg;
 	int vers;
+	int err = -ENOMEM;
 
 	gss_msg = kzalloc(sizeof(*gss_msg), GFP_NOFS);
 	if (gss_msg == NULL)
-		return ERR_PTR(-ENOMEM);
+		goto err;
 	vers = get_pipe_version(gss_auth->net);
-	if (vers < 0) {
-		kfree(gss_msg);
-		return ERR_PTR(vers);
-	}
+	err = vers;
+	if (err < 0)
+		goto err_free_msg;
 	gss_msg->pipe = gss_auth->gss_pipe[vers]->pipe;
 	INIT_LIST_HEAD(&gss_msg->list);
 	rpc_init_wait_queue(&gss_msg->rpc_waitqueue, "RPCSEC_GSS upcall waitq");
@@ -482,10 +494,17 @@
 	switch (vers) {
 	case 0:
 		gss_encode_v0_msg(gss_msg);
+		break;
 	default:
-		gss_encode_v1_msg(gss_msg, service_name, gss_auth->target_name);
+		err = gss_encode_v1_msg(gss_msg, service_name, gss_auth->target_name);
+		if (err)
+			goto err_free_msg;
 	};
 	return gss_msg;
+err_free_msg:
+	kfree(gss_msg);
+err:
+	return ERR_PTR(err);
 }
 
 static struct gss_upcall_msg *
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 7747960..dab09da 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -25,12 +25,12 @@
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/slab.h>
+#include <linux/rcupdate.h>
 #include <linux/utsname.h>
 #include <linux/workqueue.h>
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/un.h>
-#include <linux/rcupdate.h>
 
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/addr.h>
@@ -264,6 +264,26 @@
 	return rpc_pipefs_notifier_unregister(&rpc_clients_block);
 }
 
+static struct rpc_xprt *rpc_clnt_set_transport(struct rpc_clnt *clnt,
+		struct rpc_xprt *xprt,
+		const struct rpc_timeout *timeout)
+{
+	struct rpc_xprt *old;
+
+	spin_lock(&clnt->cl_lock);
+	old = rcu_dereference_protected(clnt->cl_xprt,
+			lockdep_is_held(&clnt->cl_lock));
+
+	if (!xprt_bound(xprt))
+		clnt->cl_autobind = 1;
+
+	clnt->cl_timeout = timeout;
+	rcu_assign_pointer(clnt->cl_xprt, xprt);
+	spin_unlock(&clnt->cl_lock);
+
+	return old;
+}
+
 static void rpc_clnt_set_nodename(struct rpc_clnt *clnt, const char *nodename)
 {
 	clnt->cl_nodelen = strlen(nodename);
@@ -272,12 +292,13 @@
 	memcpy(clnt->cl_nodename, nodename, clnt->cl_nodelen);
 }
 
-static int rpc_client_register(const struct rpc_create_args *args,
-			       struct rpc_clnt *clnt)
+static int rpc_client_register(struct rpc_clnt *clnt,
+			       rpc_authflavor_t pseudoflavor,
+			       const char *client_name)
 {
 	struct rpc_auth_create_args auth_args = {
-		.pseudoflavor = args->authflavor,
-		.target_name = args->client_name,
+		.pseudoflavor = pseudoflavor,
+		.target_name = client_name,
 	};
 	struct rpc_auth *auth;
 	struct net *net = rpc_net_ns(clnt);
@@ -298,7 +319,7 @@
 	auth = rpcauth_create(&auth_args, clnt);
 	if (IS_ERR(auth)) {
 		dprintk("RPC:       Couldn't create auth handle (flavor %u)\n",
-				args->authflavor);
+				pseudoflavor);
 		err = PTR_ERR(auth);
 		goto err_auth;
 	}
@@ -337,7 +358,8 @@
 {
 	const struct rpc_program *program = args->program;
 	const struct rpc_version *version;
-	struct rpc_clnt		*clnt = NULL;
+	struct rpc_clnt *clnt = NULL;
+	const struct rpc_timeout *timeout;
 	int err;
 
 	/* sanity check the name before trying to print it */
@@ -365,7 +387,6 @@
 	if (err)
 		goto out_no_clid;
 
-	rcu_assign_pointer(clnt->cl_xprt, xprt);
 	clnt->cl_procinfo = version->procs;
 	clnt->cl_maxproc  = version->nrprocs;
 	clnt->cl_prog     = args->prognumber ? : program->number;
@@ -380,16 +401,15 @@
 	INIT_LIST_HEAD(&clnt->cl_tasks);
 	spin_lock_init(&clnt->cl_lock);
 
-	if (!xprt_bound(xprt))
-		clnt->cl_autobind = 1;
-
-	clnt->cl_timeout = xprt->timeout;
+	timeout = xprt->timeout;
 	if (args->timeout != NULL) {
 		memcpy(&clnt->cl_timeout_default, args->timeout,
 				sizeof(clnt->cl_timeout_default));
-		clnt->cl_timeout = &clnt->cl_timeout_default;
+		timeout = &clnt->cl_timeout_default;
 	}
 
+	rpc_clnt_set_transport(clnt, xprt, timeout);
+
 	clnt->cl_rtt = &clnt->cl_rtt_default;
 	rpc_init_rtt(&clnt->cl_rtt_default, clnt->cl_timeout->to_initval);
 
@@ -398,7 +418,7 @@
 	/* save the nodename */
 	rpc_clnt_set_nodename(clnt, utsname()->nodename);
 
-	err = rpc_client_register(args, clnt);
+	err = rpc_client_register(clnt, args->authflavor, args->client_name);
 	if (err)
 		goto out_no_path;
 	if (parent)
@@ -600,6 +620,80 @@
 }
 EXPORT_SYMBOL_GPL(rpc_clone_client_set_auth);
 
+/**
+ * rpc_switch_client_transport: switch the RPC transport on the fly
+ * @clnt: pointer to a struct rpc_clnt
+ * @args: pointer to the new transport arguments
+ * @timeout: pointer to the new timeout parameters
+ *
+ * This function allows the caller to switch the RPC transport for the
+ * rpc_clnt structure 'clnt' to allow it to connect to a mirrored NFS
+ * server, for instance.  It assumes that the caller has ensured that
+ * there are no active RPC tasks by using some form of locking.
+ *
+ * Returns zero if "clnt" is now using the new xprt.  Otherwise a
+ * negative errno is returned, and "clnt" continues to use the old
+ * xprt.
+ */
+int rpc_switch_client_transport(struct rpc_clnt *clnt,
+		struct xprt_create *args,
+		const struct rpc_timeout *timeout)
+{
+	const struct rpc_timeout *old_timeo;
+	rpc_authflavor_t pseudoflavor;
+	struct rpc_xprt *xprt, *old;
+	struct rpc_clnt *parent;
+	int err;
+
+	xprt = xprt_create_transport(args);
+	if (IS_ERR(xprt)) {
+		dprintk("RPC:       failed to create new xprt for clnt %p\n",
+			clnt);
+		return PTR_ERR(xprt);
+	}
+
+	pseudoflavor = clnt->cl_auth->au_flavor;
+
+	old_timeo = clnt->cl_timeout;
+	old = rpc_clnt_set_transport(clnt, xprt, timeout);
+
+	rpc_unregister_client(clnt);
+	__rpc_clnt_remove_pipedir(clnt);
+
+	/*
+	 * A new transport was created.  "clnt" therefore
+	 * becomes the root of a new cl_parent tree.  clnt's
+	 * children, if it has any, still point to the old xprt.
+	 */
+	parent = clnt->cl_parent;
+	clnt->cl_parent = clnt;
+
+	/*
+	 * The old rpc_auth cache cannot be re-used.  GSS
+	 * contexts in particular are between a single
+	 * client and server.
+	 */
+	err = rpc_client_register(clnt, pseudoflavor, NULL);
+	if (err)
+		goto out_revert;
+
+	synchronize_rcu();
+	if (parent != clnt)
+		rpc_release_client(parent);
+	xprt_put(old);
+	dprintk("RPC:       replaced xprt for clnt %p\n", clnt);
+	return 0;
+
+out_revert:
+	rpc_clnt_set_transport(clnt, old, old_timeo);
+	clnt->cl_parent = parent;
+	rpc_client_register(clnt, pseudoflavor, NULL);
+	xprt_put(xprt);
+	dprintk("RPC:       failed to switch xprt for clnt %p\n", clnt);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rpc_switch_client_transport);
+
 /*
  * Kill all tasks for the given client.
  * XXX: kill their descendants as well?
@@ -772,6 +866,8 @@
 		atomic_inc(&clnt->cl_count);
 		if (clnt->cl_softrtry)
 			task->tk_flags |= RPC_TASK_SOFT;
+		if (clnt->cl_noretranstimeo)
+			task->tk_flags |= RPC_TASK_NO_RETRANS_TIMEOUT;
 		if (sk_memalloc_socks()) {
 			struct rpc_xprt *xprt;
 
@@ -1690,6 +1786,7 @@
 	dprint_status(task);
 
 	trace_rpc_connect_status(task, status);
+	task->tk_status = 0;
 	switch (status) {
 		/* if soft mounted, test if we've timed out */
 	case -ETIMEDOUT:
@@ -1698,12 +1795,14 @@
 	case -ECONNREFUSED:
 	case -ECONNRESET:
 	case -ENETUNREACH:
+		/* retry with existing socket, after a delay */
+		rpc_delay(task, 3*HZ);
 		if (RPC_IS_SOFTCONN(task))
 			break;
-		/* retry with existing socket, after a delay */
-	case 0:
 	case -EAGAIN:
-		task->tk_status = 0;
+		task->tk_action = call_bind;
+		return;
+	case 0:
 		clnt->cl_stats->netreconn++;
 		task->tk_action = call_transmit;
 		return;
@@ -1717,13 +1816,14 @@
 static void
 call_transmit(struct rpc_task *task)
 {
+	int is_retrans = RPC_WAS_SENT(task);
+
 	dprint_status(task);
 
 	task->tk_action = call_status;
 	if (task->tk_status < 0)
 		return;
-	task->tk_status = xprt_prepare_transmit(task);
-	if (task->tk_status != 0)
+	if (!xprt_prepare_transmit(task))
 		return;
 	task->tk_action = call_transmit_status;
 	/* Encode here so that rpcsec_gss can use correct sequence number. */
@@ -1742,6 +1842,8 @@
 	xprt_transmit(task);
 	if (task->tk_status < 0)
 		return;
+	if (is_retrans)
+		task->tk_client->cl_stats->rpcretrans++;
 	/*
 	 * On success, ensure that we call xprt_end_transmit() before sleeping
 	 * in order to allow access to the socket to other RPC requests.
@@ -1811,8 +1913,7 @@
 {
 	struct rpc_rqst *req = task->tk_rqstp;
 
-	task->tk_status = xprt_prepare_transmit(task);
-	if (task->tk_status == -EAGAIN) {
+	if (!xprt_prepare_transmit(task)) {
 		/*
 		 * Could not reserve the transport. Try again after the
 		 * transport is released.
@@ -1900,7 +2001,8 @@
 		rpc_delay(task, 3*HZ);
 	case -ETIMEDOUT:
 		task->tk_action = call_timeout;
-		if (task->tk_client->cl_discrtry)
+		if (!(task->tk_flags & RPC_TASK_NO_RETRANS_TIMEOUT)
+		    && task->tk_client->cl_discrtry)
 			xprt_conditional_disconnect(req->rq_xprt,
 					req->rq_connect_cookie);
 		break;
@@ -1982,7 +2084,6 @@
 	rpcauth_invalcred(task);
 
 retry:
-	clnt->cl_stats->rpcretrans++;
 	task->tk_action = call_bind;
 	task->tk_status = 0;
 }
@@ -2025,7 +2126,6 @@
 	if (req->rq_rcv_buf.len < 12) {
 		if (!RPC_IS_SOFT(task)) {
 			task->tk_action = call_bind;
-			clnt->cl_stats->rpcretrans++;
 			goto out_retry;
 		}
 		dprintk("RPC:       %s: too small RPC reply size (%d bytes)\n",
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 095363e..04199bc 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -205,10 +205,8 @@
 		goto out_sleep;
 	}
 	xprt->snd_task = task;
-	if (req != NULL) {
-		req->rq_bytes_sent = 0;
+	if (req != NULL)
 		req->rq_ntrans++;
-	}
 
 	return 1;
 
@@ -263,7 +261,6 @@
 	}
 	if (__xprt_get_cong(xprt, task)) {
 		xprt->snd_task = task;
-		req->rq_bytes_sent = 0;
 		req->rq_ntrans++;
 		return 1;
 	}
@@ -300,10 +297,8 @@
 
 	req = task->tk_rqstp;
 	xprt->snd_task = task;
-	if (req) {
-		req->rq_bytes_sent = 0;
+	if (req)
 		req->rq_ntrans++;
-	}
 	return true;
 }
 
@@ -329,7 +324,6 @@
 	}
 	if (__xprt_get_cong(xprt, task)) {
 		xprt->snd_task = task;
-		req->rq_bytes_sent = 0;
 		req->rq_ntrans++;
 		return true;
 	}
@@ -358,6 +352,11 @@
 void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task)
 {
 	if (xprt->snd_task == task) {
+		if (task != NULL) {
+			struct rpc_rqst *req = task->tk_rqstp;
+			if (req != NULL)
+				req->rq_bytes_sent = 0;
+		}
 		xprt_clear_locked(xprt);
 		__xprt_lock_write_next(xprt);
 	}
@@ -375,6 +374,11 @@
 void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task)
 {
 	if (xprt->snd_task == task) {
+		if (task != NULL) {
+			struct rpc_rqst *req = task->tk_rqstp;
+			if (req != NULL)
+				req->rq_bytes_sent = 0;
+		}
 		xprt_clear_locked(xprt);
 		__xprt_lock_write_next_cong(xprt);
 	}
@@ -854,24 +858,36 @@
  * @task: RPC task about to send a request
  *
  */
-int xprt_prepare_transmit(struct rpc_task *task)
+bool xprt_prepare_transmit(struct rpc_task *task)
 {
 	struct rpc_rqst	*req = task->tk_rqstp;
 	struct rpc_xprt	*xprt = req->rq_xprt;
-	int err = 0;
+	bool ret = false;
 
 	dprintk("RPC: %5u xprt_prepare_transmit\n", task->tk_pid);
 
 	spin_lock_bh(&xprt->transport_lock);
-	if (req->rq_reply_bytes_recvd && !req->rq_bytes_sent) {
-		err = req->rq_reply_bytes_recvd;
+	if (!req->rq_bytes_sent) {
+		if (req->rq_reply_bytes_recvd) {
+			task->tk_status = req->rq_reply_bytes_recvd;
+			goto out_unlock;
+		}
+		if ((task->tk_flags & RPC_TASK_NO_RETRANS_TIMEOUT)
+		    && xprt_connected(xprt)
+		    && req->rq_connect_cookie == xprt->connect_cookie) {
+			xprt->ops->set_retrans_timeout(task);
+			rpc_sleep_on(&xprt->pending, task, xprt_timer);
+			goto out_unlock;
+		}
+	}
+	if (!xprt->ops->reserve_xprt(xprt, task)) {
+		task->tk_status = -EAGAIN;
 		goto out_unlock;
 	}
-	if (!xprt->ops->reserve_xprt(xprt, task))
-		err = -EAGAIN;
+	ret = true;
 out_unlock:
 	spin_unlock_bh(&xprt->transport_lock);
-	return err;
+	return ret;
 }
 
 void xprt_end_transmit(struct rpc_task *task)
@@ -912,7 +928,6 @@
 	} else if (!req->rq_bytes_sent)
 		return;
 
-	req->rq_connect_cookie = xprt->connect_cookie;
 	req->rq_xtime = ktime_get();
 	status = xprt->ops->send_request(task);
 	if (status != 0) {
@@ -938,12 +953,14 @@
 	/* Don't race with disconnect */
 	if (!xprt_connected(xprt))
 		task->tk_status = -ENOTCONN;
-	else if (!req->rq_reply_bytes_recvd && rpc_reply_expected(task)) {
+	else {
 		/*
 		 * Sleep on the pending queue since
 		 * we're expecting a reply.
 		 */
-		rpc_sleep_on(&xprt->pending, task, xprt_timer);
+		if (!req->rq_reply_bytes_recvd && rpc_reply_expected(task))
+			rpc_sleep_on(&xprt->pending, task, xprt_timer);
+		req->rq_connect_cookie = xprt->connect_cookie;
 	}
 	spin_unlock_bh(&xprt->transport_lock);
 }
@@ -1087,11 +1104,9 @@
 	for (i = 0; i < num_prealloc; i++) {
 		req = kzalloc(sizeof(struct rpc_rqst), GFP_KERNEL);
 		if (!req)
-			break;
+			goto out_free;
 		list_add(&req->rq_list, &xprt->free);
 	}
-	if (i < num_prealloc)
-		goto out_free;
 	if (max_alloc > num_prealloc)
 		xprt->max_reqs = max_alloc;
 	else
@@ -1186,6 +1201,12 @@
 	req->rq_xprt    = xprt;
 	req->rq_buffer  = NULL;
 	req->rq_xid     = xprt_alloc_xid(xprt);
+	req->rq_connect_cookie = xprt->connect_cookie - 1;
+	req->rq_bytes_sent = 0;
+	req->rq_snd_buf.len = 0;
+	req->rq_snd_buf.buflen = 0;
+	req->rq_rcv_buf.len = 0;
+	req->rq_rcv_buf.buflen = 0;
 	req->rq_release_snd_buf = NULL;
 	xprt_reset_majortimeo(req);
 	dprintk("RPC: %5u reserved req %p xid %08x\n", task->tk_pid,
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index ee03d35..17c8892 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -835,6 +835,8 @@
 
 	dprintk("RPC:       xs_close xprt %p\n", xprt);
 
+	cancel_delayed_work_sync(&transport->connect_worker);
+
 	xs_reset_transport(transport);
 	xprt->reestablish_timeout = 0;
 
@@ -854,14 +856,6 @@
 		xs_tcp_shutdown(xprt);
 }
 
-static void xs_local_destroy(struct rpc_xprt *xprt)
-{
-	xs_close(xprt);
-	xs_free_peer_addresses(xprt);
-	xprt_free(xprt);
-	module_put(THIS_MODULE);
-}
-
 /**
  * xs_destroy - prepare to shutdown a transport
  * @xprt: doomed transport
@@ -869,13 +863,12 @@
  */
 static void xs_destroy(struct rpc_xprt *xprt)
 {
-	struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
-
 	dprintk("RPC:       xs_destroy xprt %p\n", xprt);
 
-	cancel_delayed_work_sync(&transport->connect_worker);
-
-	xs_local_destroy(xprt);
+	xs_close(xprt);
+	xs_free_peer_addresses(xprt);
+	xprt_free(xprt);
+	module_put(THIS_MODULE);
 }
 
 static inline struct rpc_xprt *xprt_from_sock(struct sock *sk)
@@ -1511,6 +1504,7 @@
 			transport->tcp_copied = 0;
 			transport->tcp_flags =
 				TCP_RCV_COPY_FRAGHDR | TCP_RCV_COPY_XID;
+			xprt->connect_cookie++;
 
 			xprt_wake_pending_tasks(xprt, -EAGAIN);
 		}
@@ -1816,6 +1810,10 @@
 }
 #endif
 
+static void xs_dummy_setup_socket(struct work_struct *work)
+{
+}
+
 static struct socket *xs_create_sock(struct rpc_xprt *xprt,
 		struct sock_xprt *transport, int family, int type, int protocol)
 {
@@ -2112,6 +2110,19 @@
 
 	if (!transport->inet) {
 		struct sock *sk = sock->sk;
+		unsigned int keepidle = xprt->timeout->to_initval / HZ;
+		unsigned int keepcnt = xprt->timeout->to_retries + 1;
+		unsigned int opt_on = 1;
+
+		/* TCP Keepalive options */
+		kernel_setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
+				(char *)&opt_on, sizeof(opt_on));
+		kernel_setsockopt(sock, SOL_TCP, TCP_KEEPIDLE,
+				(char *)&keepidle, sizeof(keepidle));
+		kernel_setsockopt(sock, SOL_TCP, TCP_KEEPINTVL,
+				(char *)&keepidle, sizeof(keepidle));
+		kernel_setsockopt(sock, SOL_TCP, TCP_KEEPCNT,
+				(char *)&keepcnt, sizeof(keepcnt));
 
 		write_lock_bh(&sk->sk_callback_lock);
 
@@ -2151,7 +2162,6 @@
 	case 0:
 	case -EINPROGRESS:
 		/* SYN_SENT! */
-		xprt->connect_cookie++;
 		if (xprt->reestablish_timeout < XS_TCP_INIT_REEST_TO)
 			xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO;
 	}
@@ -2498,7 +2508,7 @@
 	.send_request		= xs_local_send_request,
 	.set_retrans_timeout	= xprt_set_retrans_timeout_def,
 	.close			= xs_close,
-	.destroy		= xs_local_destroy,
+	.destroy		= xs_destroy,
 	.print_stats		= xs_local_print_stats,
 };
 
@@ -2655,6 +2665,9 @@
 	xprt->ops = &xs_local_ops;
 	xprt->timeout = &xs_local_default_timeout;
 
+	INIT_DELAYED_WORK(&transport->connect_worker,
+			xs_dummy_setup_socket);
+
 	switch (sun->sun_family) {
 	case AF_LOCAL:
 		if (sun->sun_path[0] != '/') {
@@ -2859,8 +2872,8 @@
 	if (args->bc_xprt->xpt_bc_xprt) {
 		/*
 		 * This server connection already has a backchannel
-		 * export; we can't create a new one, as we wouldn't be
-		 * able to match replies based on xid any more.  So,
+		 * transport; we can't create a new one, as we wouldn't
+		 * be able to match replies based on xid any more.  So,
 		 * reuse the already-existing one:
 		 */
 		 return args->bc_xprt->xpt_bc_xprt;
diff --git a/net/x25/Kconfig b/net/x25/Kconfig
index c959312c..e2fa133 100644
--- a/net/x25/Kconfig
+++ b/net/x25/Kconfig
@@ -16,8 +16,8 @@
 	  if you want that) and the lower level data link layer protocol LAPB
 	  (say Y to "LAPB Data Link Driver" below if you want that).
 
-	  You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
-	  <http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
+	  You can read more about X.25 at <http://www.sangoma.com/tutorials/x25/> and
+	  <http://docwiki.cisco.com/wiki/X.25>.
 	  Information about X.25 for Linux is contained in the files
 	  <file:Documentation/networking/x25.txt> and
 	  <file:Documentation/networking/x25-iface.txt>.
diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c
index 2906d52..3be02b6 100644
--- a/net/xfrm/xfrm_ipcomp.c
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -141,14 +141,14 @@
 	const int plen = skb->len;
 	int dlen = IPCOMP_SCRATCH_SIZE;
 	u8 *start = skb->data;
-	const int cpu = get_cpu();
-	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
-	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
+	struct crypto_comp *tfm;
+	u8 *scratch;
 	int err;
 
 	local_bh_disable();
+	scratch = *this_cpu_ptr(ipcomp_scratches);
+	tfm = *this_cpu_ptr(ipcd->tfms);
 	err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
-	local_bh_enable();
 	if (err)
 		goto out;
 
@@ -158,13 +158,13 @@
 	}
 
 	memcpy(start + sizeof(struct ip_comp_hdr), scratch, dlen);
-	put_cpu();
+	local_bh_enable();
 
 	pskb_trim(skb, dlen + sizeof(struct ip_comp_hdr));
 	return 0;
 
 out:
-	put_cpu();
+	local_bh_enable();
 	return err;
 }
 
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 487ac6f..9a11f9f 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -55,6 +55,7 @@
 static unsigned int table_size, table_cnt;
 static int all_symbols = 0;
 static char symbol_prefix_char = '\0';
+static unsigned long long kernel_start_addr = 0;
 
 int token_profit[0x10000];
 
@@ -65,7 +66,10 @@
 
 static void usage(void)
 {
-	fprintf(stderr, "Usage: kallsyms [--all-symbols] [--symbol-prefix=<prefix char>] < in.map > out.S\n");
+	fprintf(stderr, "Usage: kallsyms [--all-symbols] "
+			"[--symbol-prefix=<prefix char>] "
+			"[--page-offset=<CONFIG_PAGE_OFFSET>] "
+			"< in.map > out.S\n");
 	exit(1);
 }
 
@@ -194,6 +198,9 @@
 	int i;
 	int offset = 1;
 
+	if (s->addr < kernel_start_addr)
+		return 0;
+
 	/* skip prefix char */
 	if (symbol_prefix_char && *(s->sym + 1) == symbol_prefix_char)
 		offset++;
@@ -646,6 +653,9 @@
 				if ((*p == '"' && *(p+2) == '"') || (*p == '\'' && *(p+2) == '\''))
 					p++;
 				symbol_prefix_char = *p;
+			} else if (strncmp(argv[i], "--page-offset=", 14) == 0) {
+				const char *p = &argv[i][14];
+				kernel_start_addr = strtoull(p, NULL, 16);
 			} else
 				usage();
 		}
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 0149949..32b10f5 100644
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -82,6 +82,8 @@
 		kallsymopt="${kallsymopt} --all-symbols"
 	fi
 
+	kallsymopt="${kallsymopt} --page-offset=$CONFIG_PAGE_OFFSET"
+
 	local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
 		      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
 
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index a4f31c9..c5d4733 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -115,7 +115,9 @@
 	-o $(perf-tar).tar;                                         \
 mkdir -p $(perf-tar);                                               \
 git --git-dir=$(srctree)/.git rev-parse HEAD > $(perf-tar)/HEAD;    \
-tar rf $(perf-tar).tar $(perf-tar)/HEAD;                            \
+(cd $(srctree)/tools/perf;                                          \
+util/PERF-VERSION-GEN ../../$(perf-tar)/ 2>/dev/null);              \
+tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \
 rm -r $(perf-tar);                                                  \
 $(if $(findstring tar-src,$@),,                                     \
 $(if $(findstring bz2,$@),bzip2,                                    \
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 17f45e8..e1e9e0c 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -49,6 +49,8 @@
 	struct snd_pcm *pcm;
 
 	list_for_each_entry(pcm, &snd_pcm_devices, list) {
+		if (pcm->internal)
+			continue;
 		if (pcm->card == card && pcm->device == device)
 			return pcm;
 	}
@@ -60,6 +62,8 @@
 	struct snd_pcm *pcm;
 
 	list_for_each_entry(pcm, &snd_pcm_devices, list) {
+		if (pcm->internal)
+			continue;
 		if (pcm->card == card && pcm->device > device)
 			return pcm->device;
 		else if (pcm->card->number > card->number)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index bf313bea..8ad5543 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4623,6 +4623,7 @@
 	SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
 	SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_ASUS_MODE4),
+	SND_PCI_QUIRK(0x1043, 0x1bf3, "ASUS N76VZ", ALC662_FIXUP_ASUS_MODE4),
 	SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT),
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2),
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 8b50e59..01daf65 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -530,6 +530,7 @@
 				hubs->hp_startup_mode);
 			break;
 		}
+		break;
 
 	case SND_SOC_DAPM_PRE_PMD:
 		snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 2eea184..37459df 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -2,7 +2,7 @@
 	tristate "ASoC support for Samsung"
 	depends on PLAT_SAMSUNG
 	select S3C64XX_DMA if ARCH_S3C64XX
-	select S3C2410_DMA if ARCH_S3C24XX
+	select S3C24XX_DMA if ARCH_S3C24XX
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the Samsung SoCs' Audio interfaces. You will also need to
diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index e5e81b1..fefc561 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -31,11 +31,7 @@
 #undef S3C_IIS_V2_SUPPORTED
 
 #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \
-	|| defined(CONFIG_CPU_S5PV210)
-#define S3C_IIS_V2_SUPPORTED
-#endif
-
-#ifdef CONFIG_PLAT_S3C64XX
+	|| defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_CPU_S5PV210)
 #define S3C_IIS_V2_SUPPORTED
 #endif
 
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index c17c14c..b2949ae 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1949,7 +1949,7 @@
 				w->active ? "active" : "inactive");
 
 	list_for_each_entry(p, &w->sources, list_sink) {
-		if (p->connected && !p->connected(w, p->sink))
+		if (p->connected && !p->connected(w, p->source))
 			continue;
 
 		if (p->connect)
@@ -3495,6 +3495,7 @@
 		if (!w) {
 			dev_err(dapm->dev, "ASoC: Failed to create %s widget\n",
 				dai->driver->playback.stream_name);
+			return -ENOMEM;
 		}
 
 		w->priv = dai;
@@ -3513,6 +3514,7 @@
 		if (!w) {
 			dev_err(dapm->dev, "ASoC: Failed to create %s widget\n",
 				dai->driver->capture.stream_name);
+			return -ENOMEM;
 		}
 
 		w->priv = dai;
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 8fd9ec6..b8d6d54 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -89,6 +89,7 @@
 static char *os_build;
 static char *os_version;
 static char *lic_version = "Unknown version";
+static char full_domain_name[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
 static struct utsname uts_buf;
 
 /*
@@ -1367,7 +1368,7 @@
 }
 
 
-static int
+static void
 kvp_get_domain_name(char *buffer, int length)
 {
 	struct addrinfo	hints, *info ;
@@ -1381,12 +1382,12 @@
 
 	error = getaddrinfo(buffer, NULL, &hints, &info);
 	if (error != 0) {
-		strcpy(buffer, "getaddrinfo failed\n");
-		return error;
+		snprintf(buffer, length, "getaddrinfo failed: 0x%x %s",
+			error, gai_strerror(error));
+		return;
 	}
-	strcpy(buffer, info->ai_canonname);
+	snprintf(buffer, length, "%s", info->ai_canonname);
 	freeaddrinfo(info);
-	return error;
 }
 
 static int
@@ -1433,7 +1434,6 @@
 	int	pool;
 	char	*if_name;
 	struct hv_kvp_ipaddr_value *kvp_ip_val;
-	char *kvp_send_buffer;
 	char *kvp_recv_buffer;
 	size_t kvp_recv_buffer_len;
 
@@ -1442,17 +1442,21 @@
 	openlog("KVP", 0, LOG_USER);
 	syslog(LOG_INFO, "KVP starting; pid is:%d", getpid());
 
-	kvp_recv_buffer_len = NLMSG_HDRLEN + sizeof(struct cn_msg) + sizeof(struct hv_kvp_msg);
-	kvp_send_buffer = calloc(1, kvp_recv_buffer_len);
+	kvp_recv_buffer_len = NLMSG_LENGTH(0) + sizeof(struct cn_msg) + sizeof(struct hv_kvp_msg);
 	kvp_recv_buffer = calloc(1, kvp_recv_buffer_len);
-	if (!(kvp_send_buffer && kvp_recv_buffer)) {
-		syslog(LOG_ERR, "Failed to allocate netlink buffers");
+	if (!kvp_recv_buffer) {
+		syslog(LOG_ERR, "Failed to allocate netlink buffer");
 		exit(EXIT_FAILURE);
 	}
 	/*
 	 * Retrieve OS release information.
 	 */
 	kvp_get_os_info();
+	/*
+	 * Cache Fully Qualified Domain Name because getaddrinfo takes an
+	 * unpredictable amount of time to finish.
+	 */
+	kvp_get_domain_name(full_domain_name, sizeof(full_domain_name));
 
 	if (kvp_file_init()) {
 		syslog(LOG_ERR, "Failed to initialize the pools");
@@ -1488,7 +1492,7 @@
 	/*
 	 * Register ourselves with the kernel.
 	 */
-	message = (struct cn_msg *)kvp_send_buffer;
+	message = (struct cn_msg *)kvp_recv_buffer;
 	message->id.idx = CN_KVP_IDX;
 	message->id.val = CN_KVP_VAL;
 
@@ -1671,8 +1675,7 @@
 
 		switch (hv_msg->body.kvp_enum_data.index) {
 		case FullyQualifiedDomainName:
-			kvp_get_domain_name(key_value,
-					HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
+			strcpy(key_value, full_domain_name);
 			strcpy(key_name, "FullyQualifiedDomainName");
 			break;
 		case IntegrationServicesVersion:
diff --git a/tools/hv/hv_vss_daemon.c b/tools/hv/hv_vss_daemon.c
index 8611962..8bcb040 100644
--- a/tools/hv/hv_vss_daemon.c
+++ b/tools/hv/hv_vss_daemon.c
@@ -140,7 +140,6 @@
 	struct cn_msg	*incoming_cn_msg;
 	int	op;
 	struct hv_vss_msg *vss_msg;
-	char *vss_send_buffer;
 	char *vss_recv_buffer;
 	size_t vss_recv_buffer_len;
 
@@ -150,10 +149,9 @@
 	openlog("Hyper-V VSS", 0, LOG_USER);
 	syslog(LOG_INFO, "VSS starting; pid is:%d", getpid());
 
-	vss_recv_buffer_len = NLMSG_HDRLEN + sizeof(struct cn_msg) + sizeof(struct hv_vss_msg);
-	vss_send_buffer = calloc(1, vss_recv_buffer_len);
+	vss_recv_buffer_len = NLMSG_LENGTH(0) + sizeof(struct cn_msg) + sizeof(struct hv_vss_msg);
 	vss_recv_buffer = calloc(1, vss_recv_buffer_len);
-	if (!(vss_send_buffer && vss_recv_buffer)) {
+	if (!vss_recv_buffer) {
 		syslog(LOG_ERR, "Failed to allocate netlink buffers");
 		exit(EXIT_FAILURE);
 	}
@@ -185,7 +183,7 @@
 	/*
 	 * Register ourselves with the kernel.
 	 */
-	message = (struct cn_msg *)vss_send_buffer;
+	message = (struct cn_msg *)vss_recv_buffer;
 	message->id.idx = CN_VSS_IDX;
 	message->id.val = CN_VSS_VAL;
 	message->ack = 0;
diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index ca6cb77..fc15020 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -134,14 +134,14 @@
   print_install =
 else
   Q = @
-  print_compile =		echo '  CC                 '$(OBJ);
-  print_app_build =		echo '  BUILD              '$(OBJ);
-  print_fpic_compile =		echo '  CC FPIC            '$(OBJ);
-  print_shared_lib_compile =	echo '  BUILD SHARED LIB   '$(OBJ);
-  print_plugin_obj_compile =	echo '  CC PLUGIN OBJ      '$(OBJ);
-  print_plugin_build =		echo '  CC PLUGI           '$(OBJ);
-  print_static_lib_build =	echo '  BUILD STATIC LIB   '$(OBJ);
-  print_install =		echo '  INSTALL     '$1'	to	$(DESTDIR_SQ)$2';
+  print_compile =		echo '  CC       '$(OBJ);
+  print_app_build =		echo '  BUILD    '$(OBJ);
+  print_fpic_compile =		echo '  CC FPIC  '$(OBJ);
+  print_shared_lib_compile =	echo '  BUILD    SHARED LIB '$(OBJ);
+  print_plugin_obj_compile =	echo '  BUILD    PLUGIN OBJ '$(OBJ);
+  print_plugin_build =		echo '  BUILD    PLUGIN     '$(OBJ);
+  print_static_lib_build =	echo '  BUILD    STATIC LIB '$(OBJ);
+  print_install =		echo '  INSTALL  '$1'	to	$(DESTDIR_SQ)$2';
 endif
 
 do_fpic_compile =					\
@@ -268,7 +268,7 @@
 TRACEEVENT-CFLAGS: force
 	@FLAGS='$(TRACK_CFLAGS)'; \
 	    if test x"$$FLAGS" != x"`cat TRACEEVENT-CFLAGS 2>/dev/null`" ; then \
-		echo 1>&2 "    * new build flags or cross compiler"; \
+		echo 1>&2 "  FLAGS:   * new build flags or cross compiler"; \
 		echo "$$FLAGS" >TRACEEVENT-CFLAGS; \
             fi
 
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index d1c2a6a..8f450ad 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -305,6 +305,11 @@
 	return 0;
 }
 
+void pevent_register_trace_clock(struct pevent *pevent, char *trace_clock)
+{
+	pevent->trace_clock = trace_clock;
+}
+
 struct func_map {
 	unsigned long long		addr;
 	char				*func;
@@ -599,10 +604,11 @@
  * This registers a string by the address it was stored in the kernel.
  * The @fmt passed in is duplicated.
  */
-int pevent_register_print_string(struct pevent *pevent, char *fmt,
+int pevent_register_print_string(struct pevent *pevent, const char *fmt,
 				 unsigned long long addr)
 {
 	struct printk_list *item = malloc(sizeof(*item));
+	char *p;
 
 	if (!item)
 		return -1;
@@ -610,10 +616,21 @@
 	item->next = pevent->printklist;
 	item->addr = addr;
 
+	/* Strip off quotes and '\n' from the end */
+	if (fmt[0] == '"')
+		fmt++;
 	item->printk = strdup(fmt);
 	if (!item->printk)
 		goto out_free;
 
+	p = item->printk + strlen(item->printk) - 1;
+	if (*p == '"')
+		*p = 0;
+
+	p -= 2;
+	if (strcmp(p, "\\n") == 0)
+		*p = 0;
+
 	pevent->printklist = item;
 	pevent->printk_count++;
 
@@ -3488,6 +3505,7 @@
 	struct pevent *pevent = event->pevent;
 	struct print_flag_sym *flag;
 	struct format_field *field;
+	struct printk_map *printk;
 	unsigned long long val, fval;
 	unsigned long addr;
 	char *str;
@@ -3523,7 +3541,12 @@
 		if (!(field->flags & FIELD_IS_ARRAY) &&
 		    field->size == pevent->long_size) {
 			addr = *(unsigned long *)(data + field->offset);
-			trace_seq_printf(s, "%lx", addr);
+			/* Check if it matches a print format */
+			printk = find_printk(pevent, addr);
+			if (printk)
+				trace_seq_puts(s, printk->printk);
+			else
+				trace_seq_printf(s, "%lx", addr);
 			break;
 		}
 		str = malloc(len + 1);
@@ -3565,15 +3588,23 @@
 		}
 		break;
 	case PRINT_HEX:
-		field = arg->hex.field->field.field;
-		if (!field) {
-			str = arg->hex.field->field.name;
-			field = pevent_find_any_field(event, str);
-			if (!field)
-				goto out_warning_field;
-			arg->hex.field->field.field = field;
+		if (arg->hex.field->type == PRINT_DYNAMIC_ARRAY) {
+			unsigned long offset;
+			offset = pevent_read_number(pevent,
+				data + arg->hex.field->dynarray.field->offset,
+				arg->hex.field->dynarray.field->size);
+			hex = data + (offset & 0xffff);
+		} else {
+			field = arg->hex.field->field.field;
+			if (!field) {
+				str = arg->hex.field->field.name;
+				field = pevent_find_any_field(event, str);
+				if (!field)
+					goto out_warning_field;
+				arg->hex.field->field.field = field;
+			}
+			hex = data + field->offset;
 		}
-		hex = data + field->offset;
 		len = eval_num_arg(data, size, event, arg->hex.size);
 		for (i = 0; i < len; i++) {
 			if (i)
@@ -3771,8 +3802,8 @@
 	if (asprintf(&arg->atom.atom, "%lld", ip) < 0)
 		goto out_free;
 
-	/* skip the first "%pf : " */
-	for (ptr = fmt + 6, bptr = data + field->offset;
+	/* skip the first "%pf: " */
+	for (ptr = fmt + 5, bptr = data + field->offset;
 	     bptr < data + size && *ptr; ptr++) {
 		int ls = 0;
 
@@ -3882,7 +3913,6 @@
 	struct format_field *field;
 	struct printk_map *printk;
 	char *format;
-	char *p;
 
 	field = pevent->bprint_fmt_field;
 
@@ -3899,25 +3929,13 @@
 
 	printk = find_printk(pevent, addr);
 	if (!printk) {
-		if (asprintf(&format, "%%pf : (NO FORMAT FOUND at %llx)\n", addr) < 0)
+		if (asprintf(&format, "%%pf: (NO FORMAT FOUND at %llx)\n", addr) < 0)
 			return NULL;
 		return format;
 	}
 
-	p = printk->printk;
-	/* Remove any quotes. */
-	if (*p == '"')
-		p++;
-	if (asprintf(&format, "%s : %s", "%pf", p) < 0)
+	if (asprintf(&format, "%s: %s", "%pf", printk->printk) < 0)
 		return NULL;
-	/* remove ending quotes and new line since we will add one too */
-	p = format + strlen(format) - 1;
-	if (*p == '"')
-		*p = 0;
-
-	p -= 2;
-	if (strcmp(p, "\\n") == 0)
-		*p = 0;
 
 	return format;
 }
@@ -3963,7 +3981,7 @@
 	unsigned int i;
 
 	for (i = 0; i < len && p[i]; i++)
-		if (!isprint(p[i]))
+		if (!isprint(p[i]) && !isspace(p[i]))
 		    return 0;
 	return 1;
 }
@@ -4428,11 +4446,11 @@
 {
 	int print_pretty = 1;
 
-	if (event->pevent->print_raw)
+	if (event->pevent->print_raw || (event->flags & EVENT_FL_PRINTRAW))
 		print_event_fields(s, record->data, record->size, event);
 	else {
 
-		if (event->handler)
+		if (event->handler && !(event->flags & EVENT_FL_NOHANDLE))
 			print_pretty = event->handler(s, record, event,
 						      event->context);
 
@@ -4443,8 +4461,21 @@
 	trace_seq_terminate(s);
 }
 
+static bool is_timestamp_in_us(char *trace_clock, bool use_trace_clock)
+{
+	if (!use_trace_clock)
+		return true;
+
+	if (!strcmp(trace_clock, "local") || !strcmp(trace_clock, "global")
+	    || !strcmp(trace_clock, "uptime") || !strcmp(trace_clock, "perf"))
+		return true;
+
+	/* trace_clock is setting in tsc or counter mode */
+	return false;
+}
+
 void pevent_print_event(struct pevent *pevent, struct trace_seq *s,
-			struct pevent_record *record)
+			struct pevent_record *record, bool use_trace_clock)
 {
 	static const char *spaces = "                    "; /* 20 spaces */
 	struct event_format *event;
@@ -4457,9 +4488,14 @@
 	int pid;
 	int len;
 	int p;
+	bool use_usec_format;
 
-	secs = record->ts / NSECS_PER_SEC;
-	nsecs = record->ts - secs * NSECS_PER_SEC;
+	use_usec_format = is_timestamp_in_us(pevent->trace_clock,
+							use_trace_clock);
+	if (use_usec_format) {
+		secs = record->ts / NSECS_PER_SEC;
+		nsecs = record->ts - secs * NSECS_PER_SEC;
+	}
 
 	if (record->size < 0) {
 		do_warning("ug! negative record size %d", record->size);
@@ -4484,15 +4520,20 @@
 	} else
 		trace_seq_printf(s, "%16s-%-5d [%03d]", comm, pid, record->cpu);
 
-	if (pevent->flags & PEVENT_NSEC_OUTPUT) {
-		usecs = nsecs;
-		p = 9;
-	} else {
-		usecs = (nsecs + 500) / NSECS_PER_USEC;
-		p = 6;
-	}
+	if (use_usec_format) {
+		if (pevent->flags & PEVENT_NSEC_OUTPUT) {
+			usecs = nsecs;
+			p = 9;
+		} else {
+			usecs = (nsecs + 500) / NSECS_PER_USEC;
+			p = 6;
+		}
 
-	trace_seq_printf(s, " %5lu.%0*lu: %s: ", secs, p, usecs, event->name);
+		trace_seq_printf(s, " %5lu.%0*lu: %s: ",
+					secs, p, usecs, event->name);
+	} else
+		trace_seq_printf(s, " %12llu: %s: ",
+					record->ts, event->name);
 
 	/* Space out the event names evenly. */
 	len = strlen(event->name);
@@ -5326,6 +5367,48 @@
 	return -1;
 }
 
+/**
+ * pevent_print_func_field - print a field and a format for function pointers
+ * @s: The seq to print to
+ * @fmt: The printf format to print the field with.
+ * @event: the event that the field is for
+ * @name: The name of the field
+ * @record: The record with the field name.
+ * @err: print default error if failed.
+ *
+ * Returns: 0 on success, -1 field not found, or 1 if buffer is full.
+ */
+int pevent_print_func_field(struct trace_seq *s, const char *fmt,
+			    struct event_format *event, const char *name,
+			    struct pevent_record *record, int err)
+{
+	struct format_field *field = pevent_find_field(event, name);
+	struct pevent *pevent = event->pevent;
+	unsigned long long val;
+	struct func_map *func;
+	char tmp[128];
+
+	if (!field)
+		goto failed;
+
+	if (pevent_read_number_field(field, record->data, &val))
+		goto failed;
+
+	func = find_func(pevent, val);
+
+	if (func)
+		snprintf(tmp, 128, "%s/0x%llx", func->func, func->addr - val);
+	else
+		sprintf(tmp, "0x%08llx", val);
+
+	return trace_seq_printf(s, fmt, tmp);
+
+ failed:
+	if (err)
+		trace_seq_printf(s, "CAN'T FIND FIELD \"%s\"", name);
+	return -1;
+}
+
 static void free_func_handle(struct pevent_function_handler *func)
 {
 	struct pevent_func_params *params;
diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h
index c37b202..8d73d25 100644
--- a/tools/lib/traceevent/event-parse.h
+++ b/tools/lib/traceevent/event-parse.h
@@ -20,6 +20,7 @@
 #ifndef _PARSE_EVENTS_H
 #define _PARSE_EVENTS_H
 
+#include <stdbool.h>
 #include <stdarg.h>
 #include <regex.h>
 
@@ -307,6 +308,8 @@
 	EVENT_FL_ISBPRINT	= 0x04,
 	EVENT_FL_ISFUNCENT	= 0x10,
 	EVENT_FL_ISFUNCRET	= 0x20,
+	EVENT_FL_NOHANDLE	= 0x40,
+	EVENT_FL_PRINTRAW	= 0x80,
 
 	EVENT_FL_FAILED		= 0x80000000
 };
@@ -450,6 +453,8 @@
 
 	/* cache */
 	struct event_format *last_event;
+
+	char *trace_clock;
 };
 
 static inline void pevent_set_flag(struct pevent *pevent, int flag)
@@ -527,14 +532,15 @@
 };
 
 int pevent_register_comm(struct pevent *pevent, const char *comm, int pid);
+void pevent_register_trace_clock(struct pevent *pevent, char *trace_clock);
 int pevent_register_function(struct pevent *pevent, char *name,
 			     unsigned long long addr, char *mod);
-int pevent_register_print_string(struct pevent *pevent, char *fmt,
+int pevent_register_print_string(struct pevent *pevent, const char *fmt,
 				 unsigned long long addr);
 int pevent_pid_is_registered(struct pevent *pevent, int pid);
 
 void pevent_print_event(struct pevent *pevent, struct trace_seq *s,
-			struct pevent_record *record);
+			struct pevent_record *record, bool use_trace_clock);
 
 int pevent_parse_header_page(struct pevent *pevent, char *buf, unsigned long size,
 			     int long_size);
@@ -563,6 +569,10 @@
 			   struct event_format *event, const char *name,
 			   struct pevent_record *record, int err);
 
+int pevent_print_func_field(struct trace_seq *s, const char *fmt,
+			   struct event_format *event, const char *name,
+			   struct pevent_record *record, int err);
+
 int pevent_register_event_handler(struct pevent *pevent, int id,
 				  const char *sys_name, const char *event_name,
 				  pevent_event_handler_func func, void *context);
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index 8f8fbc2..782d86e 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -13,6 +13,7 @@
 common-cmds.h
 perf.data
 perf.data.old
+output.svg
 perf-archive
 tags
 TAGS
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index 5a37a7c..3ba1c0b 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -145,16 +145,17 @@
 
 ifneq ($(findstring $(MAKEFLAGS),s),s)
 ifneq ($(V),1)
-	QUIET_ASCIIDOC	= @echo '   ' ASCIIDOC $@;
-	QUIET_XMLTO	= @echo '   ' XMLTO $@;
-	QUIET_DB2TEXI	= @echo '   ' DB2TEXI $@;
-	QUIET_MAKEINFO	= @echo '   ' MAKEINFO $@;
-	QUIET_DBLATEX	= @echo '   ' DBLATEX $@;
-	QUIET_XSLTPROC	= @echo '   ' XSLTPROC $@;
-	QUIET_GEN	= @echo '   ' GEN $@;
+	QUIET_ASCIIDOC	= @echo '  ASCIIDOC '$@;
+	QUIET_XMLTO	= @echo '  XMLTO    '$@;
+	QUIET_DB2TEXI	= @echo '  DB2TEXI  '$@;
+	QUIET_MAKEINFO	= @echo '  MAKEINFO '$@;
+	QUIET_DBLATEX	= @echo '  DBLATEX  '$@;
+	QUIET_XSLTPROC	= @echo '  XSLTPROC '$@;
+	QUIET_GEN	= @echo '  GEN      '$@;
 	QUIET_STDERR	= 2> /dev/null
 	QUIET_SUBDIR0	= +@subdir=
-	QUIET_SUBDIR1	= ;$(NO_SUBDIR) echo '   ' SUBDIR $$subdir; \
+	QUIET_SUBDIR1	= ;$(NO_SUBDIR) \
+			   echo '  SUBDIR   ' $$subdir; \
 			  $(MAKE) $(PRINT_DIR) -C $$subdir
 	export V
 endif
@@ -183,47 +184,43 @@
 endif
 
 do-install-man: man
-	$(INSTALL) -d -m 755 $(DESTDIR)$(man1dir)
-#	$(INSTALL) -d -m 755 $(DESTDIR)$(man5dir)
-#	$(INSTALL) -d -m 755 $(DESTDIR)$(man7dir)
-	$(INSTALL) -m 644 $(DOC_MAN1) $(DESTDIR)$(man1dir)
-#	$(INSTALL) -m 644 $(DOC_MAN5) $(DESTDIR)$(man5dir)
-#	$(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir)
+	$(call QUIET_INSTALL, Documentation-man) \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(man1dir); \
+#		$(INSTALL) -d -m 755 $(DESTDIR)$(man5dir); \
+#		$(INSTALL) -d -m 755 $(DESTDIR)$(man7dir); \
+		$(INSTALL) -m 644 $(DOC_MAN1) $(DESTDIR)$(man1dir); \
+#		$(INSTALL) -m 644 $(DOC_MAN5) $(DESTDIR)$(man5dir); \
+#		$(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir)
 
 install-man: check-man-tools man
 
-try-install-man:
 ifdef missing_tools
-	$(warning Please install $(missing_tools) to have the man pages installed)
+  DO_INSTALL_MAN = $(warning Please install $(missing_tools) to have the man pages installed)
 else
-	$(MAKE) do-install-man
+  DO_INSTALL_MAN = do-install-man
 endif
 
+try-install-man: $(DO_INSTALL_MAN)
+
 install-info: info
-	$(INSTALL) -d -m 755 $(DESTDIR)$(infodir)
-	$(INSTALL) -m 644 $(OUTPUT)perf.info $(OUTPUT)perfman.info $(DESTDIR)$(infodir)
+	$(call QUIET_INSTALL, Documentation-info) \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(infodir); \
+		$(INSTALL) -m 644 $(OUTPUT)perf.info $(OUTPUT)perfman.info $(DESTDIR)$(infodir); \
 	if test -r $(DESTDIR)$(infodir)/dir; then \
-	  $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perf.info ;\
-	  $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perfman.info ;\
+		$(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perf.info ;\
+		$(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perfman.info ;\
 	else \
 	  echo "No directory found in $(DESTDIR)$(infodir)" >&2 ; \
 	fi
 
 install-pdf: pdf
-	$(INSTALL) -d -m 755 $(DESTDIR)$(pdfdir)
-	$(INSTALL) -m 644 $(OUTPUT)user-manual.pdf $(DESTDIR)$(pdfdir)
+	$(call QUIET_INSTALL, Documentation-pdf) \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(pdfdir); \
+		$(INSTALL) -m 644 $(OUTPUT)user-manual.pdf $(DESTDIR)$(pdfdir)
 
 #install-html: html
 #	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
 
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),tags)
-$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
-	$(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) $(OUTPUT)PERF-VERSION-FILE
-
--include $(OUTPUT)PERF-VERSION-FILE
-endif
-endif
 
 #
 # Determine "include::" file references in asciidoc files.
@@ -253,15 +250,17 @@
 	$(PERL_PATH) ./cmd-list.perl ../command-list.txt $(QUIET_STDERR) && \
 	date >$@
 
+CLEAN_FILES =									\
+	$(MAN_XML) $(addsuffix +,$(MAN_XML))					\
+	$(MAN_HTML) $(addsuffix +,$(MAN_HTML))					\
+	$(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7)				\
+	$(OUTPUT)*.texi $(OUTPUT)*.texi+ $(OUTPUT)*.texi++			\
+	$(OUTPUT)perf.info $(OUTPUT)perfman.info				\
+	$(OUTPUT)howto-index.txt $(OUTPUT)howto/*.html $(OUTPUT)doc.dep		\
+	$(OUTPUT)technical/api-*.html $(OUTPUT)technical/api-index.txt		\
+	$(cmds_txt) $(OUTPUT)*.made
 clean:
-	$(RM) $(MAN_XML) $(addsuffix +,$(MAN_XML))
-	$(RM) $(MAN_HTML) $(addsuffix +,$(MAN_HTML))
-	$(RM) $(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7)
-	$(RM) $(OUTPUT)*.texi $(OUTPUT)*.texi+ $(OUTPUT)*.texi++
-	$(RM) $(OUTPUT)perf.info $(OUTPUT)perfman.info
-	$(RM) $(OUTPUT)howto-index.txt $(OUTPUT)howto/*.html $(OUTPUT)doc.dep
-	$(RM) $(OUTPUT)technical/api-*.html $(OUTPUT)technical/api-index.txt
-	$(RM) $(cmds_txt) $(OUTPUT)*.made
+	$(call QUIET_CLEAN, Documentation) $(RM) $(CLEAN_FILES)
 
 $(MAN_HTML): $(OUTPUT)%.html : %.txt
 	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
@@ -342,5 +341,3 @@
 
 #quick-install-html:
 #	'$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir)
-
-.PHONY: .FORCE-PERF-VERSION-FILE
diff --git a/tools/perf/Documentation/perf-buildid-cache.txt b/tools/perf/Documentation/perf-buildid-cache.txt
index e9a8349..fd77d81 100644
--- a/tools/perf/Documentation/perf-buildid-cache.txt
+++ b/tools/perf/Documentation/perf-buildid-cache.txt
@@ -21,6 +21,19 @@
 -a::
 --add=::
         Add specified file to the cache.
+-k::
+--kcore::
+        Add specified kcore file to the cache. For the current host that is
+        /proc/kcore which requires root permissions to read. Be aware that
+        running 'perf buildid-cache' as root may update root's build-id cache
+        not the user's. Use the -v option to see where the file is created.
+        Note that the copied file contains only code sections not the whole core
+        image. Note also that files "kallsyms" and "modules" must also be in the
+        same directory and are also copied.  All 3 files are created with read
+        permissions for root only. kcore will not be added if there is already a
+        kcore in the cache (with the same build-id) that has the same modules at
+        the same addresses. Use the -v option to see if a copy of kcore is
+        actually made.
 -r::
 --remove=::
         Remove specified file from the cache.
diff --git a/tools/perf/Documentation/perf-kvm.txt b/tools/perf/Documentation/perf-kvm.txt
index ac84db2..6a06cef 100644
--- a/tools/perf/Documentation/perf-kvm.txt
+++ b/tools/perf/Documentation/perf-kvm.txt
@@ -109,7 +109,9 @@
 
 -m::
 --mmap-pages=::
-    Number of mmap data pages. Must be a power of two.
+    Number of mmap data pages (must be a power of two) or size
+    specification with appended unit character - B/K/M/G. The
+    size is rounded up to have nearest pages power of two value.
 
 -a::
 --all-cpus::
diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt
index c7f5f55..ab25be2 100644
--- a/tools/perf/Documentation/perf-lock.txt
+++ b/tools/perf/Documentation/perf-lock.txt
@@ -48,7 +48,7 @@
 -k::
 --key=<value>::
         Sorting key. Possible values: acquired (default), contended,
-        wait_total, wait_max, wait_min.
+	avg_wait, wait_total, wait_max, wait_min.
 
 INFO OPTIONS
 ------------
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index ca0d3d9..052f7c4 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -87,7 +87,9 @@
 
 -m::
 --mmap-pages=::
-	Number of mmap data pages. Must be a power of two.
+	Number of mmap data pages (must be a power of two) or size
+	specification with appended unit character - B/K/M/G. The
+	size is rounded up to have nearest pages power of two value.
 
 -g::
 	Enables call-graph (stack chain/backtrace) recording.
@@ -178,6 +180,9 @@
         - u:  only when the branch target is at the user level
         - k: only when the branch target is in the kernel
         - hv: only when the target is at the hypervisor level
+	- in_tx: only when the target is in a hardware transaction
+	- no_tx: only when the target is not in a hardware transaction
+	- abort_tx: only when the target is a hardware transaction abort
 
 +
 The option requires at least one branch type among any, any_call, any_ret, ind_call.
@@ -188,12 +193,14 @@
 The various filters must be specified as a comma separated list: --branch-filter any_ret,u,k
 Note that this feature may not be available on all processors.
 
--W::
 --weight::
 Enable weightened sampling. An additional weight is recorded per sample and can be
 displayed with the weight and local_weight sort keys.  This currently works for TSX
 abort events and some memory events in precise mode on modern Intel CPUs.
 
+--transaction::
+Record transaction flags for transaction related events.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 2b8097e..10a2798 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -71,7 +71,11 @@
 	entries are displayed as "[other]".
 	- cpu: cpu number the task ran at the time of sample
 	- srcline: filename and line number executed at the time of sample.  The
-	DWARF debuggin info must be provided.
+	DWARF debugging info must be provided.
+	- weight: Event specific weight, e.g. memory latency or transaction
+	abort cost. This is the global weight.
+	- local_weight: Local weight version of the weight above.
+	- transaction: Transaction abort flags.
 
 	By default, comm, dso and symbol keys are used.
 	(i.e. --sort comm,dso,symbol)
@@ -85,6 +89,8 @@
 	- symbol_from: name of function branched from
 	- symbol_to: name of function branched to
 	- mispredict: "N" for predicted branch, "Y" for mispredicted branch
+	- in_tx: branch in TSX transaction
+	- abort: TSX transaction abort.
 
 	And default sort keys are changed to comm, dso_from, symbol_from, dso_to
 	and symbol_to, see '--branch-stack'.
@@ -135,6 +141,14 @@
 
 	Default: fractal,0.5,callee,function.
 
+--max-stack::
+	Set the stack depth limit when parsing the callchain, anything
+	beyond the specified depth will be ignored. This is a trade-off
+	between information loss and faster processing especially for
+	workloads that can have a very long callchain stack.
+
+	Default: 127
+
 -G::
 --inverted::
         alias for inverted caller based call graph.
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index 73c9759..80c7da6 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -137,6 +137,11 @@
 After starting the program, wait msecs before measuring. This is useful to
 filter out the startup phase of the program, which is often very different.
 
+-T::
+--transaction::
+
+Print statistics of transactional execution if supported.
+
 EXAMPLES
 --------
 
diff --git a/tools/perf/Documentation/perf-timechart.txt b/tools/perf/Documentation/perf-timechart.txt
index 1632b0e..3ff8bd4 100644
--- a/tools/perf/Documentation/perf-timechart.txt
+++ b/tools/perf/Documentation/perf-timechart.txt
@@ -8,7 +8,8 @@
 SYNOPSIS
 --------
 [verse]
-'perf timechart' {record}
+'perf timechart' record <command>
+'perf timechart' [<options>]
 
 DESCRIPTION
 -----------
@@ -41,6 +42,18 @@
 --symfs=<directory>::
         Look for files with symbols relative to this directory.
 
+EXAMPLES
+--------
+
+$ perf timechart record git pull
+
+  [ perf record: Woken up 13 times to write data ]
+  [ perf record: Captured and wrote 4.253 MB perf.data (~185801 samples) ]
+
+$ perf timechart
+
+  Written 10.2 seconds of trace to output.svg.
+
 SEE ALSO
 --------
 linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 6a118e7..7de01dd 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -68,7 +68,9 @@
 
 -m <pages>::
 --mmap-pages=<pages>::
-	Number of mmapped data pages.
+	Number of mmap data pages (must be a power of two) or size
+	specification with appended unit character - B/K/M/G. The
+	size is rounded up to have nearest pages power of two value.
 
 -p <pid>::
 --pid=<pid>::
@@ -112,7 +114,8 @@
 
 -s::
 --sort::
-	Sort by key(s): pid, comm, dso, symbol, parent, srcline, weight, local_weight.
+	Sort by key(s): pid, comm, dso, symbol, parent, srcline, weight,
+	local_weight, abort, in_tx, transaction
 
 -n::
 --show-nr-samples::
@@ -147,6 +150,14 @@
 	Setup and enable call-graph (stack chain/backtrace) recording,
 	implies -G.
 
+--max-stack::
+	Set the stack depth limit when parsing the callchain, anything
+	beyond the specified depth will be ignored. This is a trade-off
+	between information loss and faster processing especially for
+	workloads that can have a very long callchain stack.
+
+	Default: 127
+
 --ignore-callees=<regex>::
         Ignore callees of the function(s) matching the given regex.
         This has the effect of collecting the callers of each such
diff --git a/tools/perf/Documentation/perf-trace.txt b/tools/perf/Documentation/perf-trace.txt
index daccd2c..7b0497f 100644
--- a/tools/perf/Documentation/perf-trace.txt
+++ b/tools/perf/Documentation/perf-trace.txt
@@ -9,6 +9,7 @@
 --------
 [verse]
 'perf trace'
+'perf trace record'
 
 DESCRIPTION
 -----------
@@ -16,9 +17,14 @@
 syscalls, but other system events like pagefaults, task lifetime events,
 scheduling events, etc.
 
-Initially this is a live mode only tool, but eventually will work with
-perf.data files like the other tools, allowing a detached 'record' from
-analysis phases.
+This is a live mode tool in addition to working with perf.data files like
+the other perf tools. Files can be generated using the 'perf record' command
+but the session needs to include the raw_syscalls events (-e 'raw_syscalls:*').
+Alernatively, the 'perf trace record' can be used as a shortcut to
+automatically include the raw_syscalls events when writing events to a file.
+
+The following options apply to perf trace; options to perf trace record are
+found in the perf record man page.
 
 OPTIONS
 -------
@@ -59,7 +65,9 @@
 
 -m::
 --mmap-pages=::
-	Number of mmap data pages. Must be a power of two.
+	Number of mmap data pages (must be a power of two) or size
+	specification with appended unit character - B/K/M/G. The
+	size is rounded up to have nearest pages power of two value.
 
 -C::
 --cpu::
@@ -78,6 +86,21 @@
 --input
 	Process events from a given perf data file.
 
+-T
+--time
+	Print full timestamp rather time relative to first sample.
+
+--comm::
+        Show process COMM right beside its ID, on by default, disable with --no-comm.
+
+--summary::
+	Show a summary of syscalls by thread with min, max, and average times (in
+    msec) and relative stddev.
+
+--tool_stats::
+	Show tool stats such as number of times fd->pathname was discovered thru
+	hooking the open syscall return + vfs_getname or via reading /proc/pid/fd, etc.
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-script[1]
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 64c043b..4835618 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -1,819 +1,79 @@
-include ../scripts/Makefile.include
-
-# The default target of this Makefile is...
-all:
-
-include config/utilities.mak
-
-# Define V to have a more verbose compile.
 #
-# Define O to save output files in a separate directory.
+# This is a simple wrapper Makefile that calls the main Makefile.perf
+# with a -j option to do parallel builds
 #
-# Define ARCH as name of target architecture if you want cross-builds.
-#
-# Define CROSS_COMPILE as prefix name of compiler if you want cross-builds.
-#
-# Define NO_LIBPERL to disable perl script extension.
-#
-# Define NO_LIBPYTHON to disable python script extension.
-#
-# Define PYTHON to point to the python binary if the default
-# `python' is not correct; for example: PYTHON=python2
-#
-# Define PYTHON_CONFIG to point to the python-config binary if
-# the default `$(PYTHON)-config' is not correct.
-#
-# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
-#
-# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
-#
-# Define LDFLAGS=-static to build a static binary.
-#
-# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
-#
-# Define NO_DWARF if you do not want debug-info analysis feature at all.
-#
-# Define WERROR=0 to disable treating any warnings as errors.
-#
-# Define NO_NEWT if you do not want TUI support. (deprecated)
-#
-# Define NO_SLANG if you do not want TUI support.
-#
-# Define NO_GTK2 if you do not want GTK+ GUI support.
-#
-# Define NO_DEMANGLE if you do not want C++ symbol demangling.
-#
-# Define NO_LIBELF if you do not want libelf dependency (e.g. cross-builds)
-#
-# Define NO_LIBUNWIND if you do not want libunwind dependency for dwarf
-# backtrace post unwind.
-#
-# Define NO_BACKTRACE if you do not want stack backtrace debug feature
-#
-# Define NO_LIBNUMA if you do not want numa perf benchmark
-#
-# Define NO_LIBAUDIT if you do not want libaudit support
-#
-# Define NO_LIBBIONIC if you do not want bionic support
-
-ifeq ($(srctree),)
-srctree := $(patsubst %/,%,$(dir $(shell pwd)))
-srctree := $(patsubst %/,%,$(dir $(srctree)))
-#$(info Determined 'srctree' to be $(srctree))
-endif
-
-ifneq ($(objtree),)
-#$(info Determined 'objtree' to be $(objtree))
-endif
-
-ifneq ($(OUTPUT),)
-#$(info Determined 'OUTPUT' to be $(OUTPUT))
-endif
-
-$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
-	@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
-
-CC = $(CROSS_COMPILE)gcc
-AR = $(CROSS_COMPILE)ar
-
-RM      = rm -f
-MKDIR   = mkdir
-FIND    = find
-INSTALL = install
-FLEX    = flex
-BISON   = bison
-STRIP   = strip
-
-LK_DIR          = $(srctree)/tools/lib/lk/
-TRACE_EVENT_DIR = $(srctree)/tools/lib/traceevent/
-
-# include config/Makefile by default and rule out
-# non-config cases
-config := 1
-
-NON_CONFIG_TARGETS := clean TAGS tags cscope help
-
-ifdef MAKECMDGOALS
-ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
-  config := 0
-endif
-endif
-
-ifeq ($(config),1)
-include config/Makefile
-endif
-
-export prefix bindir sharedir sysconfdir
-
-# sparse is architecture-neutral, which means that we need to tell it
-# explicitly what architecture to check for. Fix this up for yours..
-SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
-
-# Guard against environment variables
-BUILTIN_OBJS =
-LIB_H =
-LIB_OBJS =
-PYRF_OBJS =
-SCRIPT_SH =
-
-SCRIPT_SH += perf-archive.sh
-
-grep-libs = $(filter -l%,$(1))
-strip-libs = $(filter-out -l%,$(1))
-
-ifneq ($(OUTPUT),)
-  TE_PATH=$(OUTPUT)
-ifneq ($(subdir),)
-  LK_PATH=$(OUTPUT)/../lib/lk/
-else
-  LK_PATH=$(OUTPUT)
-endif
-else
-  TE_PATH=$(TRACE_EVENT_DIR)
-  LK_PATH=$(LK_DIR)
-endif
-
-LIBTRACEEVENT = $(TE_PATH)libtraceevent.a
-export LIBTRACEEVENT
-
-LIBLK = $(LK_PATH)liblk.a
-export LIBLK
-
-# python extension build directories
-PYTHON_EXTBUILD     := $(OUTPUT)python_ext_build/
-PYTHON_EXTBUILD_LIB := $(PYTHON_EXTBUILD)lib/
-PYTHON_EXTBUILD_TMP := $(PYTHON_EXTBUILD)tmp/
-export PYTHON_EXTBUILD_LIB PYTHON_EXTBUILD_TMP
-
-python-clean := rm -rf $(PYTHON_EXTBUILD) $(OUTPUT)python/perf.so
-
-PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources)
-PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py $(LIBTRACEEVENT) $(LIBLK)
-
-$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS)
-	$(QUIET_GEN)CFLAGS='$(CFLAGS)' $(PYTHON_WORD) util/setup.py \
-	  --quiet build_ext; \
-	mkdir -p $(OUTPUT)python && \
-	cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/
-#
-# No Perl scripts right now:
+# If you want to invoke the perf build in some non-standard way then
+# you can use the 'make -f Makefile.perf' method to invoke it.
 #
 
-SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH))
+#
+# Clear out the built-in rules GNU make defines by default (such as .o targets),
+# so that we pass through all targets to Makefile.perf:
+#
+.SUFFIXES:
 
 #
-# Single 'perf' binary right now:
+# We don't want to pass along options like -j:
 #
-PROGRAMS += $(OUTPUT)perf
+unexport MAKEFLAGS
 
-# what 'all' will build and 'install' will install, in perfexecdir
-ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
-
-# what 'all' will build but not install in perfexecdir
-OTHER_PROGRAMS = $(OUTPUT)perf
-
-# Set paths to tools early so that they can be used for version tests.
-ifndef SHELL_PATH
-  SHELL_PATH = /bin/sh
-endif
-ifndef PERL_PATH
-  PERL_PATH = /usr/bin/perl
-endif
-
-export PERL_PATH
-
-$(OUTPUT)util/parse-events-flex.c: util/parse-events.l $(OUTPUT)util/parse-events-bison.c
-	$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h $(PARSER_DEBUG_FLEX) -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c
-
-$(OUTPUT)util/parse-events-bison.c: util/parse-events.y
-	$(QUIET_BISON)$(BISON) -v util/parse-events.y -d $(PARSER_DEBUG_BISON) -o $(OUTPUT)util/parse-events-bison.c -p parse_events_
-
-$(OUTPUT)util/pmu-flex.c: util/pmu.l $(OUTPUT)util/pmu-bison.c
-	$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/pmu-flex.h -t util/pmu.l > $(OUTPUT)util/pmu-flex.c
-
-$(OUTPUT)util/pmu-bison.c: util/pmu.y
-	$(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c -p perf_pmu_
-
-$(OUTPUT)util/parse-events.o: $(OUTPUT)util/parse-events-flex.c $(OUTPUT)util/parse-events-bison.c
-$(OUTPUT)util/pmu.o: $(OUTPUT)util/pmu-flex.c $(OUTPUT)util/pmu-bison.c
-
-LIB_FILE=$(OUTPUT)libperf.a
-
-LIB_H += ../../include/uapi/linux/perf_event.h
-LIB_H += ../../include/linux/rbtree.h
-LIB_H += ../../include/linux/list.h
-LIB_H += ../../include/uapi/linux/const.h
-LIB_H += ../../include/linux/hash.h
-LIB_H += ../../include/linux/stringify.h
-LIB_H += util/include/linux/bitmap.h
-LIB_H += util/include/linux/bitops.h
-LIB_H += util/include/linux/compiler.h
-LIB_H += util/include/linux/const.h
-LIB_H += util/include/linux/ctype.h
-LIB_H += util/include/linux/kernel.h
-LIB_H += util/include/linux/list.h
-LIB_H += util/include/linux/export.h
-LIB_H += util/include/linux/magic.h
-LIB_H += util/include/linux/poison.h
-LIB_H += util/include/linux/prefetch.h
-LIB_H += util/include/linux/rbtree.h
-LIB_H += util/include/linux/rbtree_augmented.h
-LIB_H += util/include/linux/string.h
-LIB_H += util/include/linux/types.h
-LIB_H += util/include/linux/linkage.h
-LIB_H += util/include/asm/asm-offsets.h
-LIB_H += util/include/asm/bug.h
-LIB_H += util/include/asm/byteorder.h
-LIB_H += util/include/asm/hweight.h
-LIB_H += util/include/asm/swab.h
-LIB_H += util/include/asm/system.h
-LIB_H += util/include/asm/uaccess.h
-LIB_H += util/include/dwarf-regs.h
-LIB_H += util/include/asm/dwarf2.h
-LIB_H += util/include/asm/cpufeature.h
-LIB_H += util/include/asm/unistd_32.h
-LIB_H += util/include/asm/unistd_64.h
-LIB_H += perf.h
-LIB_H += util/annotate.h
-LIB_H += util/cache.h
-LIB_H += util/callchain.h
-LIB_H += util/build-id.h
-LIB_H += util/debug.h
-LIB_H += util/sysfs.h
-LIB_H += util/pmu.h
-LIB_H += util/event.h
-LIB_H += util/evsel.h
-LIB_H += util/evlist.h
-LIB_H += util/exec_cmd.h
-LIB_H += util/types.h
-LIB_H += util/levenshtein.h
-LIB_H += util/machine.h
-LIB_H += util/map.h
-LIB_H += util/parse-options.h
-LIB_H += util/parse-events.h
-LIB_H += util/quote.h
-LIB_H += util/util.h
-LIB_H += util/xyarray.h
-LIB_H += util/header.h
-LIB_H += util/help.h
-LIB_H += util/session.h
-LIB_H += util/strbuf.h
-LIB_H += util/strlist.h
-LIB_H += util/strfilter.h
-LIB_H += util/svghelper.h
-LIB_H += util/tool.h
-LIB_H += util/run-command.h
-LIB_H += util/sigchain.h
-LIB_H += util/dso.h
-LIB_H += util/symbol.h
-LIB_H += util/color.h
-LIB_H += util/values.h
-LIB_H += util/sort.h
-LIB_H += util/hist.h
-LIB_H += util/thread.h
-LIB_H += util/thread_map.h
-LIB_H += util/trace-event.h
-LIB_H += util/probe-finder.h
-LIB_H += util/dwarf-aux.h
-LIB_H += util/probe-event.h
-LIB_H += util/pstack.h
-LIB_H += util/cpumap.h
-LIB_H += util/top.h
-LIB_H += $(ARCH_INCLUDE)
-LIB_H += util/cgroup.h
-LIB_H += $(LIB_INCLUDE)traceevent/event-parse.h
-LIB_H += util/target.h
-LIB_H += util/rblist.h
-LIB_H += util/intlist.h
-LIB_H += util/perf_regs.h
-LIB_H += util/unwind.h
-LIB_H += util/vdso.h
-LIB_H += ui/helpline.h
-LIB_H += ui/progress.h
-LIB_H += ui/util.h
-LIB_H += ui/ui.h
-
-LIB_OBJS += $(OUTPUT)util/abspath.o
-LIB_OBJS += $(OUTPUT)util/alias.o
-LIB_OBJS += $(OUTPUT)util/annotate.o
-LIB_OBJS += $(OUTPUT)util/build-id.o
-LIB_OBJS += $(OUTPUT)util/config.o
-LIB_OBJS += $(OUTPUT)util/ctype.o
-LIB_OBJS += $(OUTPUT)util/sysfs.o
-LIB_OBJS += $(OUTPUT)util/pmu.o
-LIB_OBJS += $(OUTPUT)util/environment.o
-LIB_OBJS += $(OUTPUT)util/event.o
-LIB_OBJS += $(OUTPUT)util/evlist.o
-LIB_OBJS += $(OUTPUT)util/evsel.o
-LIB_OBJS += $(OUTPUT)util/exec_cmd.o
-LIB_OBJS += $(OUTPUT)util/help.o
-LIB_OBJS += $(OUTPUT)util/levenshtein.o
-LIB_OBJS += $(OUTPUT)util/parse-options.o
-LIB_OBJS += $(OUTPUT)util/parse-events.o
-LIB_OBJS += $(OUTPUT)util/path.o
-LIB_OBJS += $(OUTPUT)util/rbtree.o
-LIB_OBJS += $(OUTPUT)util/bitmap.o
-LIB_OBJS += $(OUTPUT)util/hweight.o
-LIB_OBJS += $(OUTPUT)util/run-command.o
-LIB_OBJS += $(OUTPUT)util/quote.o
-LIB_OBJS += $(OUTPUT)util/strbuf.o
-LIB_OBJS += $(OUTPUT)util/string.o
-LIB_OBJS += $(OUTPUT)util/strlist.o
-LIB_OBJS += $(OUTPUT)util/strfilter.o
-LIB_OBJS += $(OUTPUT)util/top.o
-LIB_OBJS += $(OUTPUT)util/usage.o
-LIB_OBJS += $(OUTPUT)util/wrapper.o
-LIB_OBJS += $(OUTPUT)util/sigchain.o
-LIB_OBJS += $(OUTPUT)util/dso.o
-LIB_OBJS += $(OUTPUT)util/symbol.o
-LIB_OBJS += $(OUTPUT)util/symbol-elf.o
-LIB_OBJS += $(OUTPUT)util/color.o
-LIB_OBJS += $(OUTPUT)util/pager.o
-LIB_OBJS += $(OUTPUT)util/header.o
-LIB_OBJS += $(OUTPUT)util/callchain.o
-LIB_OBJS += $(OUTPUT)util/values.o
-LIB_OBJS += $(OUTPUT)util/debug.o
-LIB_OBJS += $(OUTPUT)util/machine.o
-LIB_OBJS += $(OUTPUT)util/map.o
-LIB_OBJS += $(OUTPUT)util/pstack.o
-LIB_OBJS += $(OUTPUT)util/session.o
-LIB_OBJS += $(OUTPUT)util/thread.o
-LIB_OBJS += $(OUTPUT)util/thread_map.o
-LIB_OBJS += $(OUTPUT)util/trace-event-parse.o
-LIB_OBJS += $(OUTPUT)util/parse-events-flex.o
-LIB_OBJS += $(OUTPUT)util/parse-events-bison.o
-LIB_OBJS += $(OUTPUT)util/pmu-flex.o
-LIB_OBJS += $(OUTPUT)util/pmu-bison.o
-LIB_OBJS += $(OUTPUT)util/trace-event-read.o
-LIB_OBJS += $(OUTPUT)util/trace-event-info.o
-LIB_OBJS += $(OUTPUT)util/trace-event-scripting.o
-LIB_OBJS += $(OUTPUT)util/svghelper.o
-LIB_OBJS += $(OUTPUT)util/sort.o
-LIB_OBJS += $(OUTPUT)util/hist.o
-LIB_OBJS += $(OUTPUT)util/probe-event.o
-LIB_OBJS += $(OUTPUT)util/util.o
-LIB_OBJS += $(OUTPUT)util/xyarray.o
-LIB_OBJS += $(OUTPUT)util/cpumap.o
-LIB_OBJS += $(OUTPUT)util/cgroup.o
-LIB_OBJS += $(OUTPUT)util/target.o
-LIB_OBJS += $(OUTPUT)util/rblist.o
-LIB_OBJS += $(OUTPUT)util/intlist.o
-LIB_OBJS += $(OUTPUT)util/vdso.o
-LIB_OBJS += $(OUTPUT)util/stat.o
-LIB_OBJS += $(OUTPUT)util/record.o
-
-LIB_OBJS += $(OUTPUT)ui/setup.o
-LIB_OBJS += $(OUTPUT)ui/helpline.o
-LIB_OBJS += $(OUTPUT)ui/progress.o
-LIB_OBJS += $(OUTPUT)ui/util.o
-LIB_OBJS += $(OUTPUT)ui/hist.o
-LIB_OBJS += $(OUTPUT)ui/stdio/hist.o
-
-LIB_OBJS += $(OUTPUT)arch/common.o
-
-LIB_OBJS += $(OUTPUT)tests/parse-events.o
-LIB_OBJS += $(OUTPUT)tests/dso-data.o
-LIB_OBJS += $(OUTPUT)tests/attr.o
-LIB_OBJS += $(OUTPUT)tests/vmlinux-kallsyms.o
-LIB_OBJS += $(OUTPUT)tests/open-syscall.o
-LIB_OBJS += $(OUTPUT)tests/open-syscall-all-cpus.o
-LIB_OBJS += $(OUTPUT)tests/open-syscall-tp-fields.o
-LIB_OBJS += $(OUTPUT)tests/mmap-basic.o
-LIB_OBJS += $(OUTPUT)tests/perf-record.o
-LIB_OBJS += $(OUTPUT)tests/rdpmc.o
-LIB_OBJS += $(OUTPUT)tests/evsel-roundtrip-name.o
-LIB_OBJS += $(OUTPUT)tests/evsel-tp-sched.o
-LIB_OBJS += $(OUTPUT)tests/pmu.o
-LIB_OBJS += $(OUTPUT)tests/hists_link.o
-LIB_OBJS += $(OUTPUT)tests/python-use.o
-LIB_OBJS += $(OUTPUT)tests/bp_signal.o
-LIB_OBJS += $(OUTPUT)tests/bp_signal_overflow.o
-LIB_OBJS += $(OUTPUT)tests/task-exit.o
-LIB_OBJS += $(OUTPUT)tests/sw-clock.o
-ifeq ($(ARCH),x86)
-LIB_OBJS += $(OUTPUT)tests/perf-time-to-tsc.o
-endif
-LIB_OBJS += $(OUTPUT)tests/code-reading.o
-LIB_OBJS += $(OUTPUT)tests/sample-parsing.o
-LIB_OBJS += $(OUTPUT)tests/parse-no-sample-id-all.o
-
-BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
-BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
-# Benchmark modules
-BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
-BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
-ifeq ($(RAW_ARCH),x86_64)
-BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy-x86-64-asm.o
-BUILTIN_OBJS += $(OUTPUT)bench/mem-memset-x86-64-asm.o
-endif
-BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
-BUILTIN_OBJS += $(OUTPUT)bench/mem-memset.o
-
-BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
-BUILTIN_OBJS += $(OUTPUT)builtin-evlist.o
-BUILTIN_OBJS += $(OUTPUT)builtin-help.o
-BUILTIN_OBJS += $(OUTPUT)builtin-sched.o
-BUILTIN_OBJS += $(OUTPUT)builtin-buildid-list.o
-BUILTIN_OBJS += $(OUTPUT)builtin-buildid-cache.o
-BUILTIN_OBJS += $(OUTPUT)builtin-list.o
-BUILTIN_OBJS += $(OUTPUT)builtin-record.o
-BUILTIN_OBJS += $(OUTPUT)builtin-report.o
-BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
-BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
-BUILTIN_OBJS += $(OUTPUT)builtin-top.o
-BUILTIN_OBJS += $(OUTPUT)builtin-script.o
-BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
-BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
-BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
-BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
-BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
-BUILTIN_OBJS += $(OUTPUT)tests/builtin-test.o
-BUILTIN_OBJS += $(OUTPUT)builtin-mem.o
-
-PERFLIBS = $(LIB_FILE) $(LIBLK) $(LIBTRACEEVENT)
-
-# We choose to avoid "if .. else if .. else .. endif endif"
-# because maintaining the nesting to match is a pain.  If
-# we had "elif" things would have been much nicer...
-
--include arch/$(ARCH)/Makefile
-
-ifneq ($(OUTPUT),)
-  CFLAGS += -I$(OUTPUT)
-endif
-
-ifdef NO_LIBELF
-EXTLIBS := $(filter-out -lelf,$(EXTLIBS))
-
-# Remove ELF/DWARF dependent codes
-LIB_OBJS := $(filter-out $(OUTPUT)util/symbol-elf.o,$(LIB_OBJS))
-LIB_OBJS := $(filter-out $(OUTPUT)util/dwarf-aux.o,$(LIB_OBJS))
-LIB_OBJS := $(filter-out $(OUTPUT)util/probe-event.o,$(LIB_OBJS))
-LIB_OBJS := $(filter-out $(OUTPUT)util/probe-finder.o,$(LIB_OBJS))
-
-BUILTIN_OBJS := $(filter-out $(OUTPUT)builtin-probe.o,$(BUILTIN_OBJS))
-
-# Use minimal symbol handling
-LIB_OBJS += $(OUTPUT)util/symbol-minimal.o
-
-else # NO_LIBELF
-ifndef NO_DWARF
-  LIB_OBJS += $(OUTPUT)util/probe-finder.o
-  LIB_OBJS += $(OUTPUT)util/dwarf-aux.o
-endif # NO_DWARF
-endif # NO_LIBELF
-
-ifndef NO_LIBUNWIND
-  LIB_OBJS += $(OUTPUT)util/unwind.o
-endif
-LIB_OBJS += $(OUTPUT)tests/keep-tracking.o
-
-ifndef NO_LIBAUDIT
-  BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
-endif
-
-ifndef NO_SLANG
-  LIB_OBJS += $(OUTPUT)ui/browser.o
-  LIB_OBJS += $(OUTPUT)ui/browsers/annotate.o
-  LIB_OBJS += $(OUTPUT)ui/browsers/hists.o
-  LIB_OBJS += $(OUTPUT)ui/browsers/map.o
-  LIB_OBJS += $(OUTPUT)ui/browsers/scripts.o
-  LIB_OBJS += $(OUTPUT)ui/tui/setup.o
-  LIB_OBJS += $(OUTPUT)ui/tui/util.o
-  LIB_OBJS += $(OUTPUT)ui/tui/helpline.o
-  LIB_OBJS += $(OUTPUT)ui/tui/progress.o
-  LIB_H += ui/browser.h
-  LIB_H += ui/browsers/map.h
-  LIB_H += ui/keysyms.h
-  LIB_H += ui/libslang.h
-endif
-
-ifndef NO_GTK2
-  LIB_OBJS += $(OUTPUT)ui/gtk/browser.o
-  LIB_OBJS += $(OUTPUT)ui/gtk/hists.o
-  LIB_OBJS += $(OUTPUT)ui/gtk/setup.o
-  LIB_OBJS += $(OUTPUT)ui/gtk/util.o
-  LIB_OBJS += $(OUTPUT)ui/gtk/helpline.o
-  LIB_OBJS += $(OUTPUT)ui/gtk/progress.o
-  LIB_OBJS += $(OUTPUT)ui/gtk/annotate.o
-endif
-
-ifndef NO_LIBPERL
-  LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
-  LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
-endif
-
-ifndef NO_LIBPYTHON
-  LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
-  LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
-endif
-
-ifeq ($(NO_PERF_REGS),0)
-  ifeq ($(ARCH),x86)
-    LIB_H += arch/x86/include/perf_regs.h
+#
+# Do a parallel build with multiple jobs, based on the number of CPUs online
+# in this system: 'make -j8' on a 8-CPU system, etc.
+#
+# (To override it, run 'make JOBS=1' and similar.)
+#
+ifeq ($(JOBS),)
+  JOBS := $(shell grep -c ^processor /proc/cpuinfo 2>/dev/null)
+  ifeq ($(JOBS),)
+    JOBS := 1
   endif
 endif
 
-ifndef NO_LIBNUMA
-  BUILTIN_OBJS += $(OUTPUT)bench/numa.o
+#
+# Only pass canonical directory names as the output directory:
+#
+ifneq ($(O),)
+  FULL_O := $(shell readlink -f $(O) || echo $(O))
 endif
 
-ifdef ASCIIDOC8
-  export ASCIIDOC8
+#
+# Only accept the 'DEBUG' variable from the command line:
+#
+ifeq ("$(origin DEBUG)", "command line")
+  ifeq ($(DEBUG),)
+    override DEBUG = 0
+  else
+    SET_DEBUG = "DEBUG=$(DEBUG)"
+  endif
+else
+  override DEBUG = 0
 endif
 
-LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group $(EXTLIBS) -Wl,--end-group
+define print_msg
+  @printf '  BUILD:   Doing '\''make \033[33m-j'$(JOBS)'\033[m'\'' parallel build\n'
+endef
 
-export INSTALL SHELL_PATH
+define make
+  @$(MAKE) -f Makefile.perf --no-print-directory -j$(JOBS) O=$(FULL_O) $(SET_DEBUG) $@
+endef
 
-### Build rules
+#
+# Needed if no target specified:
+#
+all:
+	$(print_msg)
+	$(make)
 
-SHELL = $(SHELL_PATH)
+#
+# The clean target is not really parallel, don't print the jobs info:
+#
+clean:
+	$(make)
 
-all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
-
-please_set_SHELL_PATH_to_a_more_modern_shell:
-	@$$(:)
-
-shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
-
-strip: $(PROGRAMS) $(OUTPUT)perf
-	$(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf
-
-$(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -include $(OUTPUT)PERF-VERSION-FILE \
-		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
-		$(CFLAGS) -c $(filter %.c,$^) -o $@
-
-$(OUTPUT)perf: $(OUTPUT)perf.o $(BUILTIN_OBJS) $(PERFLIBS)
-	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $(OUTPUT)perf.o \
-               $(BUILTIN_OBJS) $(LIBS) -o $@
-
-$(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
-		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
-		'-DPERF_MAN_PATH="$(mandir_SQ)"' \
-		'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
-
-$(OUTPUT)builtin-timechart.o: builtin-timechart.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
-		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
-		'-DPERF_MAN_PATH="$(mandir_SQ)"' \
-		'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
-
-$(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt
-
-$(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
-	$(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
-
-$(SCRIPTS) : % : %.sh
-	$(QUIET_GEN)$(INSTALL) '$@.sh' '$(OUTPUT)$@'
-
-# These can record PERF_VERSION
-$(OUTPUT)perf.o perf.spec \
-	$(SCRIPTS) \
-	: $(OUTPUT)PERF-VERSION-FILE
-
-.SUFFIXES:
-.SUFFIXES: .o .c .S .s
-
-# These two need to be here so that when O= is not used they take precedence
-# over the general rule for .o
-
-$(OUTPUT)util/%-flex.o: $(OUTPUT)util/%-flex.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c -Iutil/ $(CFLAGS) -w $<
-
-$(OUTPUT)util/%-bison.o: $(OUTPUT)util/%-bison.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c -Iutil/ $(CFLAGS) -DYYENABLE_NLS=0 -DYYLTYPE_IS_TRIVIAL=0 -w $<
-
-$(OUTPUT)%.o: %.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $<
-$(OUTPUT)%.i: %.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -E $(CFLAGS) $<
-$(OUTPUT)%.s: %.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -S $(CFLAGS) $<
-$(OUTPUT)%.o: %.S
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $<
-$(OUTPUT)%.s: %.S
-	$(QUIET_CC)$(CC) -o $@ -E $(CFLAGS) $<
-
-$(OUTPUT)util/exec_cmd.o: util/exec_cmd.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
-		'-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
-		'-DPREFIX="$(prefix_SQ)"' \
-		$<
-
-$(OUTPUT)tests/attr.o: tests/attr.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
-		'-DBINDIR="$(bindir_SQ)"' -DPYTHON='"$(PYTHON_WORD)"' \
-		$<
-
-$(OUTPUT)tests/python-use.o: tests/python-use.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
-		-DPYTHONPATH='"$(OUTPUT)python"' \
-		-DPYTHON='"$(PYTHON_WORD)"' \
-		$<
-
-$(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
-
-$(OUTPUT)ui/browser.o: ui/browser.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
-
-$(OUTPUT)ui/browsers/annotate.o: ui/browsers/annotate.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
-
-$(OUTPUT)ui/browsers/hists.o: ui/browsers/hists.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
-
-$(OUTPUT)ui/browsers/map.o: ui/browsers/map.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
-
-$(OUTPUT)ui/browsers/scripts.o: ui/browsers/scripts.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
-
-$(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -Wno-unused-parameter -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
-
-$(OUTPUT)util/parse-events.o: util/parse-events.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -Wno-redundant-decls $<
-
-$(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow -Wno-undef -Wno-switch-default $<
-
-$(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs -Wno-undef -Wno-switch-default $<
-
-$(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
-
-$(OUTPUT)scripts/python/Perf-Trace-Util/Context.o: scripts/python/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
-
-$(OUTPUT)perf-%: %.o $(PERFLIBS)
-	$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $(LDFLAGS) $(filter %.o,$^) $(LIBS)
-
-$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
-$(patsubst perf-%,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
-
-# we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
-# we depend the various files onto their directories.
-DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
-$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
-# In the second step, we make a rule to actually create these directories
-$(sort $(dir $(DIRECTORY_DEPS))):
-	$(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
-
-$(LIB_FILE): $(LIB_OBJS)
-	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
-
-# libtraceevent.a
-$(LIBTRACEEVENT):
-	$(QUIET_SUBDIR0)$(TRACE_EVENT_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) libtraceevent.a
-
-$(LIBTRACEEVENT)-clean:
-	$(QUIET_SUBDIR0)$(TRACE_EVENT_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) clean
-
-# if subdir is set, we've been called from above so target has been built
-# already
-$(LIBLK):
-ifeq ($(subdir),)
-	$(QUIET_SUBDIR0)$(LK_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) liblk.a
-endif
-
-$(LIBLK)-clean:
-ifeq ($(subdir),)
-	$(QUIET_SUBDIR0)$(LK_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) clean
-endif
-
-help:
-	@echo 'Perf make targets:'
-	@echo '  doc		- make *all* documentation (see below)'
-	@echo '  man		- make manpage documentation (access with man <foo>)'
-	@echo '  html		- make html documentation'
-	@echo '  info		- make GNU info documentation (access with info <foo>)'
-	@echo '  pdf		- make pdf documentation'
-	@echo '  TAGS		- use etags to make tag information for source browsing'
-	@echo '  tags		- use ctags to make tag information for source browsing'
-	@echo '  cscope	- use cscope to make interactive browsing database'
-	@echo ''
-	@echo 'Perf install targets:'
-	@echo '  NOTE: documentation build requires asciidoc, xmlto packages to be installed'
-	@echo '  HINT: use "make prefix=<path> <install target>" to install to a particular'
-	@echo '        path like make prefix=/usr/local install install-doc'
-	@echo '  install	- install compiled binaries'
-	@echo '  install-doc	- install *all* documentation'
-	@echo '  install-man	- install manpage documentation'
-	@echo '  install-html	- install html documentation'
-	@echo '  install-info	- install GNU info documentation'
-	@echo '  install-pdf	- install pdf documentation'
-	@echo ''
-	@echo '  quick-install-doc	- alias for quick-install-man'
-	@echo '  quick-install-man	- install the documentation quickly'
-	@echo '  quick-install-html	- install the html documentation quickly'
-	@echo ''
-	@echo 'Perf maintainer targets:'
-	@echo '  clean			- clean all binary objects and build output'
-
-
-DOC_TARGETS := doc man html info pdf
-
-INSTALL_DOC_TARGETS := $(patsubst %,install-%,$(DOC_TARGETS)) try-install-man
-INSTALL_DOC_TARGETS += quick-install-doc quick-install-man quick-install-html
-
-# 'make doc' should call 'make -C Documentation all'
-$(DOC_TARGETS):
-	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:doc=all)
-
-TAGS:
-	$(RM) TAGS
-	$(FIND) . -name '*.[hcS]' -print | xargs etags -a
-
-tags:
-	$(RM) tags
-	$(FIND) . -name '*.[hcS]' -print | xargs ctags -a
-
-cscope:
-	$(RM) cscope*
-	$(FIND) . -name '*.[hcS]' -print | xargs cscope -b
-
-### Detect prefix changes
-TRACK_CFLAGS = $(subst ','\'',$(CFLAGS)):\
-             $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
-
-$(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS
-	@FLAGS='$(TRACK_CFLAGS)'; \
-	    if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \
-		echo 1>&2 "    * new build flags or prefix"; \
-		echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \
-            fi
-
-### Testing rules
-
-# GNU make supports exporting all variables by "export" without parameters.
-# However, the environment gets quite big, and some programs have problems
-# with that.
-
-check: $(OUTPUT)common-cmds.h
-	if sparse; \
-	then \
-		for i in *.c */*.c; \
-		do \
-			sparse $(CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
-		done; \
-	else \
-		exit 1; \
-	fi
-
-### Installation rules
-
-install-bin: all
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
-	$(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)'
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
-	$(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
-ifndef NO_LIBPERL
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
-	$(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
-	$(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'
-	$(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
-endif
-ifndef NO_LIBPYTHON
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
-	$(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
-	$(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'
-	$(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
-endif
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d'
-	$(INSTALL) bash_completion '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d/perf'
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'
-	$(INSTALL) tests/attr.py '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'
-	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
-	$(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
-
-install: install-bin try-install-man
-
-install-python_ext:
-	$(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)'
-
-# 'make install-doc' should call 'make -C Documentation install'
-$(INSTALL_DOC_TARGETS):
-	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:-doc=)
-
-### Cleaning rules
-
-clean: $(LIBTRACEEVENT)-clean $(LIBLK)-clean
-	$(RM) $(LIB_OBJS) $(BUILTIN_OBJS) $(LIB_FILE) $(OUTPUT)perf-archive $(OUTPUT)perf.o $(LANG_BINDINGS)
-	$(RM) $(ALL_PROGRAMS) perf
-	$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
-	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) clean
-	$(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS
-	$(RM) $(OUTPUT)util/*-bison*
-	$(RM) $(OUTPUT)util/*-flex*
-	$(python-clean)
-
-.PHONY: all install clean strip $(LIBTRACEEVENT) $(LIBLK)
-.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
-.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
+#
+# All other targets get passed through:
+#
+%:
+	$(print_msg)
+	$(make)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
new file mode 100644
index 0000000..7fc8f17
--- /dev/null
+++ b/tools/perf/Makefile.perf
@@ -0,0 +1,892 @@
+include ../scripts/Makefile.include
+
+# The default target of this Makefile is...
+all:
+
+include config/utilities.mak
+
+# Define V to have a more verbose compile.
+#
+# Define O to save output files in a separate directory.
+#
+# Define ARCH as name of target architecture if you want cross-builds.
+#
+# Define CROSS_COMPILE as prefix name of compiler if you want cross-builds.
+#
+# Define NO_LIBPERL to disable perl script extension.
+#
+# Define NO_LIBPYTHON to disable python script extension.
+#
+# Define PYTHON to point to the python binary if the default
+# `python' is not correct; for example: PYTHON=python2
+#
+# Define PYTHON_CONFIG to point to the python-config binary if
+# the default `$(PYTHON)-config' is not correct.
+#
+# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
+#
+# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
+#
+# Define LDFLAGS=-static to build a static binary.
+#
+# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
+#
+# Define NO_DWARF if you do not want debug-info analysis feature at all.
+#
+# Define WERROR=0 to disable treating any warnings as errors.
+#
+# Define NO_NEWT if you do not want TUI support. (deprecated)
+#
+# Define NO_SLANG if you do not want TUI support.
+#
+# Define NO_GTK2 if you do not want GTK+ GUI support.
+#
+# Define NO_DEMANGLE if you do not want C++ symbol demangling.
+#
+# Define NO_LIBELF if you do not want libelf dependency (e.g. cross-builds)
+#
+# Define NO_LIBUNWIND if you do not want libunwind dependency for dwarf
+# backtrace post unwind.
+#
+# Define NO_BACKTRACE if you do not want stack backtrace debug feature
+#
+# Define NO_LIBNUMA if you do not want numa perf benchmark
+#
+# Define NO_LIBAUDIT if you do not want libaudit support
+#
+# Define NO_LIBBIONIC if you do not want bionic support
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(shell pwd)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+#$(info Determined 'srctree' to be $(srctree))
+endif
+
+ifneq ($(objtree),)
+#$(info Determined 'objtree' to be $(objtree))
+endif
+
+ifneq ($(OUTPUT),)
+#$(info Determined 'OUTPUT' to be $(OUTPUT))
+endif
+
+$(OUTPUT)PERF-VERSION-FILE: ../../.git/HEAD
+	@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
+	@touch $(OUTPUT)PERF-VERSION-FILE
+
+CC = $(CROSS_COMPILE)gcc
+AR = $(CROSS_COMPILE)ar
+
+RM      = rm -f
+LN      = ln -f
+MKDIR   = mkdir
+FIND    = find
+INSTALL = install
+FLEX    = flex
+BISON   = bison
+STRIP   = strip
+
+LK_DIR          = $(srctree)/tools/lib/lk/
+TRACE_EVENT_DIR = $(srctree)/tools/lib/traceevent/
+
+# include config/Makefile by default and rule out
+# non-config cases
+config := 1
+
+NON_CONFIG_TARGETS := clean TAGS tags cscope help
+
+ifdef MAKECMDGOALS
+ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
+  config := 0
+endif
+endif
+
+ifeq ($(config),1)
+include config/Makefile
+endif
+
+export prefix bindir sharedir sysconfdir
+
+# sparse is architecture-neutral, which means that we need to tell it
+# explicitly what architecture to check for. Fix this up for yours..
+SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
+
+# Guard against environment variables
+BUILTIN_OBJS =
+LIB_H =
+LIB_OBJS =
+GTK_OBJS =
+PYRF_OBJS =
+SCRIPT_SH =
+
+SCRIPT_SH += perf-archive.sh
+
+grep-libs = $(filter -l%,$(1))
+strip-libs = $(filter-out -l%,$(1))
+
+ifneq ($(OUTPUT),)
+  TE_PATH=$(OUTPUT)
+ifneq ($(subdir),)
+  LK_PATH=$(OUTPUT)/../lib/lk/
+else
+  LK_PATH=$(OUTPUT)
+endif
+else
+  TE_PATH=$(TRACE_EVENT_DIR)
+  LK_PATH=$(LK_DIR)
+endif
+
+LIBTRACEEVENT = $(TE_PATH)libtraceevent.a
+export LIBTRACEEVENT
+
+LIBLK = $(LK_PATH)liblk.a
+export LIBLK
+
+# python extension build directories
+PYTHON_EXTBUILD     := $(OUTPUT)python_ext_build/
+PYTHON_EXTBUILD_LIB := $(PYTHON_EXTBUILD)lib/
+PYTHON_EXTBUILD_TMP := $(PYTHON_EXTBUILD)tmp/
+export PYTHON_EXTBUILD_LIB PYTHON_EXTBUILD_TMP
+
+python-clean := $(call QUIET_CLEAN, python) $(RM) -r $(PYTHON_EXTBUILD) $(OUTPUT)python/perf.so
+
+PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources)
+PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py $(LIBTRACEEVENT) $(LIBLK)
+
+$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS)
+	$(QUIET_GEN)CFLAGS='$(CFLAGS)' $(PYTHON_WORD) util/setup.py \
+	  --quiet build_ext; \
+	mkdir -p $(OUTPUT)python && \
+	cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/
+#
+# No Perl scripts right now:
+#
+
+SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH))
+
+#
+# Single 'perf' binary right now:
+#
+PROGRAMS += $(OUTPUT)perf
+
+# what 'all' will build and 'install' will install, in perfexecdir
+ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
+
+# what 'all' will build but not install in perfexecdir
+OTHER_PROGRAMS = $(OUTPUT)perf
+
+# Set paths to tools early so that they can be used for version tests.
+ifndef SHELL_PATH
+  SHELL_PATH = /bin/sh
+endif
+ifndef PERL_PATH
+  PERL_PATH = /usr/bin/perl
+endif
+
+export PERL_PATH
+
+$(OUTPUT)util/parse-events-flex.c: util/parse-events.l $(OUTPUT)util/parse-events-bison.c
+	$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h $(PARSER_DEBUG_FLEX) -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c
+
+$(OUTPUT)util/parse-events-bison.c: util/parse-events.y
+	$(QUIET_BISON)$(BISON) -v util/parse-events.y -d $(PARSER_DEBUG_BISON) -o $(OUTPUT)util/parse-events-bison.c -p parse_events_
+
+$(OUTPUT)util/pmu-flex.c: util/pmu.l $(OUTPUT)util/pmu-bison.c
+	$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/pmu-flex.h -t util/pmu.l > $(OUTPUT)util/pmu-flex.c
+
+$(OUTPUT)util/pmu-bison.c: util/pmu.y
+	$(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c -p perf_pmu_
+
+$(OUTPUT)util/parse-events.o: $(OUTPUT)util/parse-events-flex.c $(OUTPUT)util/parse-events-bison.c
+$(OUTPUT)util/pmu.o: $(OUTPUT)util/pmu-flex.c $(OUTPUT)util/pmu-bison.c
+
+LIB_FILE=$(OUTPUT)libperf.a
+
+LIB_H += ../../include/uapi/linux/perf_event.h
+LIB_H += ../../include/linux/rbtree.h
+LIB_H += ../../include/linux/list.h
+LIB_H += ../../include/uapi/linux/const.h
+LIB_H += ../../include/linux/hash.h
+LIB_H += ../../include/linux/stringify.h
+LIB_H += util/include/linux/bitmap.h
+LIB_H += util/include/linux/bitops.h
+LIB_H += util/include/linux/compiler.h
+LIB_H += util/include/linux/const.h
+LIB_H += util/include/linux/ctype.h
+LIB_H += util/include/linux/kernel.h
+LIB_H += util/include/linux/list.h
+LIB_H += util/include/linux/export.h
+LIB_H += util/include/linux/magic.h
+LIB_H += util/include/linux/poison.h
+LIB_H += util/include/linux/prefetch.h
+LIB_H += util/include/linux/rbtree.h
+LIB_H += util/include/linux/rbtree_augmented.h
+LIB_H += util/include/linux/string.h
+LIB_H += util/include/linux/types.h
+LIB_H += util/include/linux/linkage.h
+LIB_H += util/include/asm/asm-offsets.h
+LIB_H += util/include/asm/bug.h
+LIB_H += util/include/asm/byteorder.h
+LIB_H += util/include/asm/hweight.h
+LIB_H += util/include/asm/swab.h
+LIB_H += util/include/asm/system.h
+LIB_H += util/include/asm/uaccess.h
+LIB_H += util/include/dwarf-regs.h
+LIB_H += util/include/asm/dwarf2.h
+LIB_H += util/include/asm/cpufeature.h
+LIB_H += util/include/asm/unistd_32.h
+LIB_H += util/include/asm/unistd_64.h
+LIB_H += perf.h
+LIB_H += util/annotate.h
+LIB_H += util/cache.h
+LIB_H += util/callchain.h
+LIB_H += util/build-id.h
+LIB_H += util/debug.h
+LIB_H += util/fs.h
+LIB_H += util/pmu.h
+LIB_H += util/event.h
+LIB_H += util/evsel.h
+LIB_H += util/evlist.h
+LIB_H += util/exec_cmd.h
+LIB_H += util/types.h
+LIB_H += util/levenshtein.h
+LIB_H += util/machine.h
+LIB_H += util/map.h
+LIB_H += util/parse-options.h
+LIB_H += util/parse-events.h
+LIB_H += util/quote.h
+LIB_H += util/util.h
+LIB_H += util/xyarray.h
+LIB_H += util/header.h
+LIB_H += util/help.h
+LIB_H += util/session.h
+LIB_H += util/strbuf.h
+LIB_H += util/strlist.h
+LIB_H += util/strfilter.h
+LIB_H += util/svghelper.h
+LIB_H += util/tool.h
+LIB_H += util/run-command.h
+LIB_H += util/sigchain.h
+LIB_H += util/dso.h
+LIB_H += util/symbol.h
+LIB_H += util/color.h
+LIB_H += util/values.h
+LIB_H += util/sort.h
+LIB_H += util/hist.h
+LIB_H += util/comm.h
+LIB_H += util/thread.h
+LIB_H += util/thread_map.h
+LIB_H += util/trace-event.h
+LIB_H += util/probe-finder.h
+LIB_H += util/dwarf-aux.h
+LIB_H += util/probe-event.h
+LIB_H += util/pstack.h
+LIB_H += util/cpumap.h
+LIB_H += util/top.h
+LIB_H += $(ARCH_INCLUDE)
+LIB_H += util/cgroup.h
+LIB_H += $(LIB_INCLUDE)traceevent/event-parse.h
+LIB_H += util/target.h
+LIB_H += util/rblist.h
+LIB_H += util/intlist.h
+LIB_H += util/perf_regs.h
+LIB_H += util/unwind.h
+LIB_H += util/vdso.h
+LIB_H += ui/helpline.h
+LIB_H += ui/progress.h
+LIB_H += ui/util.h
+LIB_H += ui/ui.h
+LIB_H += util/data.h
+
+LIB_OBJS += $(OUTPUT)util/abspath.o
+LIB_OBJS += $(OUTPUT)util/alias.o
+LIB_OBJS += $(OUTPUT)util/annotate.o
+LIB_OBJS += $(OUTPUT)util/build-id.o
+LIB_OBJS += $(OUTPUT)util/config.o
+LIB_OBJS += $(OUTPUT)util/ctype.o
+LIB_OBJS += $(OUTPUT)util/fs.o
+LIB_OBJS += $(OUTPUT)util/pmu.o
+LIB_OBJS += $(OUTPUT)util/environment.o
+LIB_OBJS += $(OUTPUT)util/event.o
+LIB_OBJS += $(OUTPUT)util/evlist.o
+LIB_OBJS += $(OUTPUT)util/evsel.o
+LIB_OBJS += $(OUTPUT)util/exec_cmd.o
+LIB_OBJS += $(OUTPUT)util/help.o
+LIB_OBJS += $(OUTPUT)util/levenshtein.o
+LIB_OBJS += $(OUTPUT)util/parse-options.o
+LIB_OBJS += $(OUTPUT)util/parse-events.o
+LIB_OBJS += $(OUTPUT)util/path.o
+LIB_OBJS += $(OUTPUT)util/rbtree.o
+LIB_OBJS += $(OUTPUT)util/bitmap.o
+LIB_OBJS += $(OUTPUT)util/hweight.o
+LIB_OBJS += $(OUTPUT)util/run-command.o
+LIB_OBJS += $(OUTPUT)util/quote.o
+LIB_OBJS += $(OUTPUT)util/strbuf.o
+LIB_OBJS += $(OUTPUT)util/string.o
+LIB_OBJS += $(OUTPUT)util/strlist.o
+LIB_OBJS += $(OUTPUT)util/strfilter.o
+LIB_OBJS += $(OUTPUT)util/top.o
+LIB_OBJS += $(OUTPUT)util/usage.o
+LIB_OBJS += $(OUTPUT)util/wrapper.o
+LIB_OBJS += $(OUTPUT)util/sigchain.o
+LIB_OBJS += $(OUTPUT)util/dso.o
+LIB_OBJS += $(OUTPUT)util/symbol.o
+LIB_OBJS += $(OUTPUT)util/symbol-elf.o
+LIB_OBJS += $(OUTPUT)util/color.o
+LIB_OBJS += $(OUTPUT)util/pager.o
+LIB_OBJS += $(OUTPUT)util/header.o
+LIB_OBJS += $(OUTPUT)util/callchain.o
+LIB_OBJS += $(OUTPUT)util/values.o
+LIB_OBJS += $(OUTPUT)util/debug.o
+LIB_OBJS += $(OUTPUT)util/machine.o
+LIB_OBJS += $(OUTPUT)util/map.o
+LIB_OBJS += $(OUTPUT)util/pstack.o
+LIB_OBJS += $(OUTPUT)util/session.o
+LIB_OBJS += $(OUTPUT)util/comm.o
+LIB_OBJS += $(OUTPUT)util/thread.o
+LIB_OBJS += $(OUTPUT)util/thread_map.o
+LIB_OBJS += $(OUTPUT)util/trace-event-parse.o
+LIB_OBJS += $(OUTPUT)util/parse-events-flex.o
+LIB_OBJS += $(OUTPUT)util/parse-events-bison.o
+LIB_OBJS += $(OUTPUT)util/pmu-flex.o
+LIB_OBJS += $(OUTPUT)util/pmu-bison.o
+LIB_OBJS += $(OUTPUT)util/trace-event-read.o
+LIB_OBJS += $(OUTPUT)util/trace-event-info.o
+LIB_OBJS += $(OUTPUT)util/trace-event-scripting.o
+LIB_OBJS += $(OUTPUT)util/svghelper.o
+LIB_OBJS += $(OUTPUT)util/sort.o
+LIB_OBJS += $(OUTPUT)util/hist.o
+LIB_OBJS += $(OUTPUT)util/probe-event.o
+LIB_OBJS += $(OUTPUT)util/util.o
+LIB_OBJS += $(OUTPUT)util/xyarray.o
+LIB_OBJS += $(OUTPUT)util/cpumap.o
+LIB_OBJS += $(OUTPUT)util/cgroup.o
+LIB_OBJS += $(OUTPUT)util/target.o
+LIB_OBJS += $(OUTPUT)util/rblist.o
+LIB_OBJS += $(OUTPUT)util/intlist.o
+LIB_OBJS += $(OUTPUT)util/vdso.o
+LIB_OBJS += $(OUTPUT)util/stat.o
+LIB_OBJS += $(OUTPUT)util/record.o
+LIB_OBJS += $(OUTPUT)util/srcline.o
+LIB_OBJS += $(OUTPUT)util/data.o
+
+LIB_OBJS += $(OUTPUT)ui/setup.o
+LIB_OBJS += $(OUTPUT)ui/helpline.o
+LIB_OBJS += $(OUTPUT)ui/progress.o
+LIB_OBJS += $(OUTPUT)ui/util.o
+LIB_OBJS += $(OUTPUT)ui/hist.o
+LIB_OBJS += $(OUTPUT)ui/stdio/hist.o
+
+LIB_OBJS += $(OUTPUT)arch/common.o
+
+LIB_OBJS += $(OUTPUT)tests/parse-events.o
+LIB_OBJS += $(OUTPUT)tests/dso-data.o
+LIB_OBJS += $(OUTPUT)tests/attr.o
+LIB_OBJS += $(OUTPUT)tests/vmlinux-kallsyms.o
+LIB_OBJS += $(OUTPUT)tests/open-syscall.o
+LIB_OBJS += $(OUTPUT)tests/open-syscall-all-cpus.o
+LIB_OBJS += $(OUTPUT)tests/open-syscall-tp-fields.o
+LIB_OBJS += $(OUTPUT)tests/mmap-basic.o
+LIB_OBJS += $(OUTPUT)tests/perf-record.o
+LIB_OBJS += $(OUTPUT)tests/rdpmc.o
+LIB_OBJS += $(OUTPUT)tests/evsel-roundtrip-name.o
+LIB_OBJS += $(OUTPUT)tests/evsel-tp-sched.o
+LIB_OBJS += $(OUTPUT)tests/pmu.o
+LIB_OBJS += $(OUTPUT)tests/hists_link.o
+LIB_OBJS += $(OUTPUT)tests/python-use.o
+LIB_OBJS += $(OUTPUT)tests/bp_signal.o
+LIB_OBJS += $(OUTPUT)tests/bp_signal_overflow.o
+LIB_OBJS += $(OUTPUT)tests/task-exit.o
+LIB_OBJS += $(OUTPUT)tests/sw-clock.o
+ifeq ($(ARCH),x86)
+LIB_OBJS += $(OUTPUT)tests/perf-time-to-tsc.o
+endif
+LIB_OBJS += $(OUTPUT)tests/code-reading.o
+LIB_OBJS += $(OUTPUT)tests/sample-parsing.o
+LIB_OBJS += $(OUTPUT)tests/parse-no-sample-id-all.o
+
+BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
+BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
+# Benchmark modules
+BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
+BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
+ifeq ($(RAW_ARCH),x86_64)
+BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy-x86-64-asm.o
+BUILTIN_OBJS += $(OUTPUT)bench/mem-memset-x86-64-asm.o
+endif
+BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
+BUILTIN_OBJS += $(OUTPUT)bench/mem-memset.o
+
+BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
+BUILTIN_OBJS += $(OUTPUT)builtin-evlist.o
+BUILTIN_OBJS += $(OUTPUT)builtin-help.o
+BUILTIN_OBJS += $(OUTPUT)builtin-sched.o
+BUILTIN_OBJS += $(OUTPUT)builtin-buildid-list.o
+BUILTIN_OBJS += $(OUTPUT)builtin-buildid-cache.o
+BUILTIN_OBJS += $(OUTPUT)builtin-list.o
+BUILTIN_OBJS += $(OUTPUT)builtin-record.o
+BUILTIN_OBJS += $(OUTPUT)builtin-report.o
+BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
+BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
+BUILTIN_OBJS += $(OUTPUT)builtin-top.o
+BUILTIN_OBJS += $(OUTPUT)builtin-script.o
+BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
+BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
+BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
+BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
+BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
+BUILTIN_OBJS += $(OUTPUT)tests/builtin-test.o
+BUILTIN_OBJS += $(OUTPUT)builtin-mem.o
+
+PERFLIBS = $(LIB_FILE) $(LIBLK) $(LIBTRACEEVENT)
+
+# We choose to avoid "if .. else if .. else .. endif endif"
+# because maintaining the nesting to match is a pain.  If
+# we had "elif" things would have been much nicer...
+
+-include arch/$(ARCH)/Makefile
+
+ifneq ($(OUTPUT),)
+  CFLAGS += -I$(OUTPUT)
+endif
+
+ifdef NO_LIBELF
+EXTLIBS := $(filter-out -lelf,$(EXTLIBS))
+
+# Remove ELF/DWARF dependent codes
+LIB_OBJS := $(filter-out $(OUTPUT)util/symbol-elf.o,$(LIB_OBJS))
+LIB_OBJS := $(filter-out $(OUTPUT)util/dwarf-aux.o,$(LIB_OBJS))
+LIB_OBJS := $(filter-out $(OUTPUT)util/probe-event.o,$(LIB_OBJS))
+LIB_OBJS := $(filter-out $(OUTPUT)util/probe-finder.o,$(LIB_OBJS))
+
+BUILTIN_OBJS := $(filter-out $(OUTPUT)builtin-probe.o,$(BUILTIN_OBJS))
+
+# Use minimal symbol handling
+LIB_OBJS += $(OUTPUT)util/symbol-minimal.o
+
+else # NO_LIBELF
+ifndef NO_DWARF
+  LIB_OBJS += $(OUTPUT)util/probe-finder.o
+  LIB_OBJS += $(OUTPUT)util/dwarf-aux.o
+endif # NO_DWARF
+endif # NO_LIBELF
+
+ifndef NO_LIBUNWIND
+  LIB_OBJS += $(OUTPUT)util/unwind.o
+endif
+LIB_OBJS += $(OUTPUT)tests/keep-tracking.o
+
+ifndef NO_LIBAUDIT
+  BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
+endif
+
+ifndef NO_SLANG
+  LIB_OBJS += $(OUTPUT)ui/browser.o
+  LIB_OBJS += $(OUTPUT)ui/browsers/annotate.o
+  LIB_OBJS += $(OUTPUT)ui/browsers/hists.o
+  LIB_OBJS += $(OUTPUT)ui/browsers/map.o
+  LIB_OBJS += $(OUTPUT)ui/browsers/scripts.o
+  LIB_OBJS += $(OUTPUT)ui/tui/setup.o
+  LIB_OBJS += $(OUTPUT)ui/tui/util.o
+  LIB_OBJS += $(OUTPUT)ui/tui/helpline.o
+  LIB_OBJS += $(OUTPUT)ui/tui/progress.o
+  LIB_H += ui/tui/tui.h
+  LIB_H += ui/browser.h
+  LIB_H += ui/browsers/map.h
+  LIB_H += ui/keysyms.h
+  LIB_H += ui/libslang.h
+endif
+
+ifndef NO_GTK2
+  ALL_PROGRAMS += $(OUTPUT)libperf-gtk.so
+
+  GTK_OBJS += $(OUTPUT)ui/gtk/browser.o
+  GTK_OBJS += $(OUTPUT)ui/gtk/hists.o
+  GTK_OBJS += $(OUTPUT)ui/gtk/setup.o
+  GTK_OBJS += $(OUTPUT)ui/gtk/util.o
+  GTK_OBJS += $(OUTPUT)ui/gtk/helpline.o
+  GTK_OBJS += $(OUTPUT)ui/gtk/progress.o
+  GTK_OBJS += $(OUTPUT)ui/gtk/annotate.o
+
+install-gtk: $(OUTPUT)libperf-gtk.so
+	$(call QUIET_INSTALL, 'GTK UI') \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(libdir_SQ)'; \
+		$(INSTALL) $(OUTPUT)libperf-gtk.so '$(DESTDIR_SQ)$(libdir_SQ)'
+endif
+
+ifndef NO_LIBPERL
+  LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
+  LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
+endif
+
+ifndef NO_LIBPYTHON
+  LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
+  LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
+endif
+
+ifeq ($(NO_PERF_REGS),0)
+  ifeq ($(ARCH),x86)
+    LIB_H += arch/x86/include/perf_regs.h
+  endif
+endif
+
+ifndef NO_LIBNUMA
+  BUILTIN_OBJS += $(OUTPUT)bench/numa.o
+endif
+
+ifdef ASCIIDOC8
+  export ASCIIDOC8
+endif
+
+LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group $(EXTLIBS) -Wl,--end-group
+
+export INSTALL SHELL_PATH
+
+### Build rules
+
+SHELL = $(SHELL_PATH)
+
+all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
+
+please_set_SHELL_PATH_to_a_more_modern_shell:
+	@$$(:)
+
+shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
+
+strip: $(PROGRAMS) $(OUTPUT)perf
+	$(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf
+
+$(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -include $(OUTPUT)PERF-VERSION-FILE \
+		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
+		$(CFLAGS) -c $(filter %.c,$^) -o $@
+
+$(OUTPUT)perf: $(OUTPUT)perf.o $(BUILTIN_OBJS) $(PERFLIBS)
+	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $(OUTPUT)perf.o \
+               $(BUILTIN_OBJS) $(LIBS) -o $@
+
+$(GTK_OBJS): $(OUTPUT)%.o: %.c $(LIB_H)
+	$(QUIET_CC)$(CC) -o $@ -c -fPIC $(CFLAGS) $(GTK_CFLAGS) $<
+
+$(OUTPUT)libperf-gtk.so: $(GTK_OBJS) $(PERFLIBS)
+	$(QUIET_LINK)$(CC) -o $@ -shared $(ALL_LDFLAGS) $(filter %.o,$^) $(GTK_LIBS)
+
+$(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
+		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
+		'-DPERF_MAN_PATH="$(mandir_SQ)"' \
+		'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
+
+$(OUTPUT)builtin-timechart.o: builtin-timechart.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
+		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
+		'-DPERF_MAN_PATH="$(mandir_SQ)"' \
+		'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
+
+$(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt
+
+$(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
+	$(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
+
+$(SCRIPTS) : % : %.sh
+	$(QUIET_GEN)$(INSTALL) '$@.sh' '$(OUTPUT)$@'
+
+# These can record PERF_VERSION
+$(OUTPUT)perf.o perf.spec \
+	$(SCRIPTS) \
+	: $(OUTPUT)PERF-VERSION-FILE
+
+.SUFFIXES:
+
+#
+# If a target does not match any of the later rules then prefix it by $(OUTPUT)
+# This makes targets like 'make O=/tmp/perf perf.o' work in a natural way.
+#
+ifneq ($(OUTPUT),)
+%.o: $(OUTPUT)%.o
+	@echo "    # Redirected target $@ => $(OUTPUT)$@"
+util/%.o: $(OUTPUT)util/%.o
+	@echo "    # Redirected target $@ => $(OUTPUT)$@"
+bench/%.o: $(OUTPUT)bench/%.o
+	@echo "    # Redirected target $@ => $(OUTPUT)$@"
+tests/%.o: $(OUTPUT)tests/%.o
+	@echo "    # Redirected target $@ => $(OUTPUT)$@"
+endif
+
+# These two need to be here so that when O= is not used they take precedence
+# over the general rule for .o
+
+$(OUTPUT)util/%-flex.o: $(OUTPUT)util/%-flex.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c -Iutil/ $(CFLAGS) -w $<
+
+$(OUTPUT)util/%-bison.o: $(OUTPUT)util/%-bison.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c -Iutil/ $(CFLAGS) -DYYENABLE_NLS=0 -DYYLTYPE_IS_TRIVIAL=0 -w $<
+
+$(OUTPUT)%.o: %.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $<
+$(OUTPUT)%.i: %.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -E $(CFLAGS) $<
+$(OUTPUT)%.s: %.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -S $(CFLAGS) $<
+$(OUTPUT)%.o: %.S
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $<
+$(OUTPUT)%.s: %.S
+	$(QUIET_CC)$(CC) -o $@ -E $(CFLAGS) $<
+
+$(OUTPUT)util/exec_cmd.o: util/exec_cmd.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
+		'-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
+		'-DPREFIX="$(prefix_SQ)"' \
+		$<
+
+$(OUTPUT)tests/attr.o: tests/attr.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
+		'-DBINDIR="$(bindir_SQ)"' -DPYTHON='"$(PYTHON_WORD)"' \
+		$<
+
+$(OUTPUT)tests/python-use.o: tests/python-use.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
+		-DPYTHONPATH='"$(OUTPUT)python"' \
+		-DPYTHON='"$(PYTHON_WORD)"' \
+		$<
+
+$(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
+$(OUTPUT)ui/setup.o: ui/setup.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DLIBDIR='"$(libdir_SQ)"' $<
+
+$(OUTPUT)ui/browser.o: ui/browser.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)ui/browsers/annotate.o: ui/browsers/annotate.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)ui/browsers/hists.o: ui/browsers/hists.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)ui/browsers/map.o: ui/browsers/map.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)ui/browsers/scripts.o: ui/browsers/scripts.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -Wno-unused-parameter -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
+$(OUTPUT)util/parse-events.o: util/parse-events.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) -Wno-redundant-decls $<
+
+$(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow -Wno-undef -Wno-switch-default $<
+
+$(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs -Wno-undef -Wno-switch-default $<
+
+$(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
+
+$(OUTPUT)scripts/python/Perf-Trace-Util/Context.o: scripts/python/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
+
+$(OUTPUT)perf-%: %.o $(PERFLIBS)
+	$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $(LDFLAGS) $(filter %.o,$^) $(LIBS)
+
+$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
+$(patsubst perf-%,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
+
+# we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
+# we depend the various files onto their directories.
+DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(GTK_OBJS)
+DIRECTORY_DEPS += $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
+$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
+# In the second step, we make a rule to actually create these directories
+$(sort $(dir $(DIRECTORY_DEPS))):
+	$(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
+
+$(LIB_FILE): $(LIB_OBJS)
+	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
+
+# libtraceevent.a
+TE_SOURCES = $(wildcard $(TRACE_EVENT_DIR)*.[ch])
+
+$(LIBTRACEEVENT): $(TE_SOURCES)
+	$(QUIET_SUBDIR0)$(TRACE_EVENT_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) CFLAGS="-g -Wall $(EXTRA_CFLAGS)" libtraceevent.a
+
+$(LIBTRACEEVENT)-clean:
+	$(call QUIET_CLEAN, libtraceevent)
+	@$(MAKE) -C $(TRACE_EVENT_DIR) O=$(OUTPUT) clean >/dev/null
+
+LIBLK_SOURCES = $(wildcard $(LK_PATH)*.[ch])
+
+# if subdir is set, we've been called from above so target has been built
+# already
+$(LIBLK): $(LIBLK_SOURCES)
+ifeq ($(subdir),)
+	$(QUIET_SUBDIR0)$(LK_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) liblk.a
+endif
+
+$(LIBLK)-clean:
+ifeq ($(subdir),)
+	$(call QUIET_CLEAN, liblk)
+	@$(MAKE) -C $(LK_DIR) O=$(OUTPUT) clean >/dev/null
+endif
+
+help:
+	@echo 'Perf make targets:'
+	@echo '  doc		- make *all* documentation (see below)'
+	@echo '  man		- make manpage documentation (access with man <foo>)'
+	@echo '  html		- make html documentation'
+	@echo '  info		- make GNU info documentation (access with info <foo>)'
+	@echo '  pdf		- make pdf documentation'
+	@echo '  TAGS		- use etags to make tag information for source browsing'
+	@echo '  tags		- use ctags to make tag information for source browsing'
+	@echo '  cscope	- use cscope to make interactive browsing database'
+	@echo ''
+	@echo 'Perf install targets:'
+	@echo '  NOTE: documentation build requires asciidoc, xmlto packages to be installed'
+	@echo '  HINT: use "make prefix=<path> <install target>" to install to a particular'
+	@echo '        path like make prefix=/usr/local install install-doc'
+	@echo '  install	- install compiled binaries'
+	@echo '  install-doc	- install *all* documentation'
+	@echo '  install-man	- install manpage documentation'
+	@echo '  install-html	- install html documentation'
+	@echo '  install-info	- install GNU info documentation'
+	@echo '  install-pdf	- install pdf documentation'
+	@echo ''
+	@echo '  quick-install-doc	- alias for quick-install-man'
+	@echo '  quick-install-man	- install the documentation quickly'
+	@echo '  quick-install-html	- install the html documentation quickly'
+	@echo ''
+	@echo 'Perf maintainer targets:'
+	@echo '  clean			- clean all binary objects and build output'
+
+
+DOC_TARGETS := doc man html info pdf
+
+INSTALL_DOC_TARGETS := $(patsubst %,install-%,$(DOC_TARGETS)) try-install-man
+INSTALL_DOC_TARGETS += quick-install-doc quick-install-man quick-install-html
+
+# 'make doc' should call 'make -C Documentation all'
+$(DOC_TARGETS):
+	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:doc=all)
+
+TAGS:
+	$(RM) TAGS
+	$(FIND) . -name '*.[hcS]' -print | xargs etags -a
+
+tags:
+	$(RM) tags
+	$(FIND) . -name '*.[hcS]' -print | xargs ctags -a
+
+cscope:
+	$(RM) cscope*
+	$(FIND) . -name '*.[hcS]' -print | xargs cscope -b
+
+### Detect prefix changes
+TRACK_CFLAGS = $(subst ','\'',$(CFLAGS)):\
+             $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
+
+$(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS
+	@FLAGS='$(TRACK_CFLAGS)'; \
+	    if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \
+		echo 1>&2 "  FLAGS:   * new build flags or prefix"; \
+		echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \
+            fi
+
+### Testing rules
+
+# GNU make supports exporting all variables by "export" without parameters.
+# However, the environment gets quite big, and some programs have problems
+# with that.
+
+check: $(OUTPUT)common-cmds.h
+	if sparse; \
+	then \
+		for i in *.c */*.c; \
+		do \
+			sparse $(CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
+		done; \
+	else \
+		exit 1; \
+	fi
+
+### Installation rules
+
+install-gtk:
+
+install-bin: all install-gtk
+	$(call QUIET_INSTALL, binaries) \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'; \
+		$(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)'; \
+		$(LN) '$(DESTDIR_SQ)$(bindir_SQ)/perf' '$(DESTDIR_SQ)$(bindir_SQ)/trace'
+	$(call QUIET_INSTALL, libexec) \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
+	$(call QUIET_INSTALL, perf-archive) \
+		$(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
+ifndef NO_LIBPERL
+	$(call QUIET_INSTALL, perl-scripts) \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'; \
+		$(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'; \
+		$(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'; \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'; \
+		$(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
+endif
+ifndef NO_LIBPYTHON
+	$(call QUIET_INSTALL, python-scripts) \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'; \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'; \
+		$(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'; \
+		$(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'; \
+		$(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
+endif
+	$(call QUIET_INSTALL, bash_completion-script) \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d'; \
+		$(INSTALL) bash_completion '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d/perf'
+	$(call QUIET_INSTALL, tests) \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'; \
+		$(INSTALL) tests/attr.py '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'; \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'; \
+		$(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
+
+install: install-bin try-install-man
+
+install-python_ext:
+	$(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)'
+
+# 'make install-doc' should call 'make -C Documentation install'
+$(INSTALL_DOC_TARGETS):
+	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:-doc=)
+
+### Cleaning rules
+
+#
+# This is here, not in config/Makefile, because config/Makefile does
+# not get included for the clean target:
+#
+config-clean:
+	$(call QUIET_CLEAN, config)
+	@$(MAKE) -C config/feature-checks clean >/dev/null
+
+clean: $(LIBTRACEEVENT)-clean $(LIBLK)-clean config-clean
+	$(call QUIET_CLEAN, core-objs)  $(RM) $(LIB_OBJS) $(BUILTIN_OBJS) $(LIB_FILE) $(OUTPUT)perf-archive $(OUTPUT)perf.o $(LANG_BINDINGS) $(GTK_OBJS)
+	$(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf
+	$(call QUIET_CLEAN, core-gen)   $(RM)  *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex*
+	$(call QUIET_CLEAN, Documentation)
+	@$(MAKE) -C Documentation O=$(OUTPUT) clean >/dev/null
+	$(python-clean)
+
+#
+# Trick: if ../../.git does not exist - we are building out of tree for example,
+# then force version regeneration:
+#
+ifeq ($(wildcard ../../.git/HEAD),)
+    GIT-HEAD-PHONY = ../../.git/HEAD
+else
+    GIT-HEAD-PHONY =
+endif
+
+.PHONY: all install clean config-clean strip install-gtk
+.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
+.PHONY: $(GIT-HEAD-PHONY) TAGS tags cscope .FORCE-PERF-CFLAGS
+
diff --git a/tools/perf/arch/x86/include/perf_regs.h b/tools/perf/arch/x86/include/perf_regs.h
index 7fcdcdb..e84ca76 100644
--- a/tools/perf/arch/x86/include/perf_regs.h
+++ b/tools/perf/arch/x86/include/perf_regs.h
@@ -5,7 +5,7 @@
 #include "../../util/types.h"
 #include <asm/perf_regs.h>
 
-#ifndef ARCH_X86_64
+#ifndef HAVE_ARCH_X86_64_SUPPORT
 #define PERF_REGS_MASK ((1ULL << PERF_REG_X86_32_MAX) - 1)
 #else
 #define REG_NOSUPPORT ((1ULL << PERF_REG_X86_DS) | \
@@ -52,7 +52,7 @@
 		return "FS";
 	case PERF_REG_X86_GS:
 		return "GS";
-#ifdef ARCH_X86_64
+#ifdef HAVE_ARCH_X86_64_SUPPORT
 	case PERF_REG_X86_R8:
 		return "R8";
 	case PERF_REG_X86_R9:
@@ -69,7 +69,7 @@
 		return "R14";
 	case PERF_REG_X86_R15:
 		return "R15";
-#endif /* ARCH_X86_64 */
+#endif /* HAVE_ARCH_X86_64_SUPPORT */
 	default:
 		return NULL;
 	}
diff --git a/tools/perf/arch/x86/util/unwind.c b/tools/perf/arch/x86/util/unwind.c
index 78d956e..456a88c 100644
--- a/tools/perf/arch/x86/util/unwind.c
+++ b/tools/perf/arch/x86/util/unwind.c
@@ -4,7 +4,7 @@
 #include "perf_regs.h"
 #include "../../util/unwind.h"
 
-#ifdef ARCH_X86_64
+#ifdef HAVE_ARCH_X86_64_SUPPORT
 int unwind__arch_reg_id(int regnum)
 {
 	int id;
@@ -108,4 +108,4 @@
 
 	return id;
 }
-#endif /* ARCH_X86_64 */
+#endif /* HAVE_ARCH_X86_64_SUPPORT */
diff --git a/tools/perf/bash_completion b/tools/perf/bash_completion
index 56e6a12..62e157db 100644
--- a/tools/perf/bash_completion
+++ b/tools/perf/bash_completion
@@ -1,17 +1,87 @@
 # perf completion
 
-function_exists()
+# Taken from git.git's completion script.
+__my_reassemble_comp_words_by_ref()
 {
-	declare -F $1 > /dev/null
-	return $?
+	local exclude i j first
+	# Which word separators to exclude?
+	exclude="${1//[^$COMP_WORDBREAKS]}"
+	cword_=$COMP_CWORD
+	if [ -z "$exclude" ]; then
+		words_=("${COMP_WORDS[@]}")
+		return
+	fi
+	# List of word completion separators has shrunk;
+	# re-assemble words to complete.
+	for ((i=0, j=0; i < ${#COMP_WORDS[@]}; i++, j++)); do
+		# Append each nonempty word consisting of just
+		# word separator characters to the current word.
+		first=t
+		while
+			[ $i -gt 0 ] &&
+			[ -n "${COMP_WORDS[$i]}" ] &&
+			# word consists of excluded word separators
+			[ "${COMP_WORDS[$i]//[^$exclude]}" = "${COMP_WORDS[$i]}" ]
+		do
+			# Attach to the previous token,
+			# unless the previous token is the command name.
+			if [ $j -ge 2 ] && [ -n "$first" ]; then
+				((j--))
+			fi
+			first=
+			words_[$j]=${words_[j]}${COMP_WORDS[i]}
+			if [ $i = $COMP_CWORD ]; then
+				cword_=$j
+			fi
+			if (($i < ${#COMP_WORDS[@]} - 1)); then
+				((i++))
+			else
+				# Done.
+				return
+			fi
+		done
+		words_[$j]=${words_[j]}${COMP_WORDS[i]}
+		if [ $i = $COMP_CWORD ]; then
+			cword_=$j
+		fi
+	done
 }
 
-function_exists __ltrim_colon_completions ||
+type _get_comp_words_by_ref &>/dev/null ||
+_get_comp_words_by_ref()
+{
+	local exclude cur_ words_ cword_
+	if [ "$1" = "-n" ]; then
+		exclude=$2
+		shift 2
+	fi
+	__my_reassemble_comp_words_by_ref "$exclude"
+	cur_=${words_[cword_]}
+	while [ $# -gt 0 ]; do
+		case "$1" in
+		cur)
+			cur=$cur_
+			;;
+		prev)
+			prev=${words_[$cword_-1]}
+			;;
+		words)
+			words=("${words_[@]}")
+			;;
+		cword)
+			cword=$cword_
+			;;
+		esac
+		shift
+	done
+}
+
+type __ltrim_colon_completions &>/dev/null ||
 __ltrim_colon_completions()
 {
 	if [[ "$1" == *:* && "$COMP_WORDBREAKS" == *:* ]]; then
 		# Remove colon-word prefix from COMPREPLY items
-		local colon_word=${1%${1##*:}}
+		local colon_word=${1%"${1##*:}"}
 		local i=${#COMPREPLY[*]}
 		while [[ $((--i)) -ge 0 ]]; do
 			COMPREPLY[$i]=${COMPREPLY[$i]#"$colon_word"}
@@ -19,23 +89,18 @@
 	fi
 }
 
-have perf &&
+type perf &>/dev/null &&
 _perf()
 {
-	local cur prev cmd
+	local cur words cword prev cmd
 
 	COMPREPLY=()
-	if function_exists _get_comp_words_by_ref; then
-		_get_comp_words_by_ref -n : cur prev
-	else
-		cur=$(_get_cword :)
-		prev=${COMP_WORDS[COMP_CWORD-1]}
-	fi
+	_get_comp_words_by_ref -n =: cur words cword prev
 
-	cmd=${COMP_WORDS[0]}
+	cmd=${words[0]}
 
 	# List perf subcommands or long options
-	if [ $COMP_CWORD -eq 1 ]; then
+	if [ $cword -eq 1 ]; then
 		if [[ $cur == --* ]]; then
 			COMPREPLY=( $( compgen -W '--help --version \
 			--exec-path --html-path --paginate --no-pager \
@@ -45,18 +110,17 @@
 			COMPREPLY=( $( compgen -W '$cmds' -- "$cur" ) )
 		fi
 	# List possible events for -e option
-	elif [[ $prev == "-e" && "${COMP_WORDS[1]}" == @(record|stat|top) ]]; then
+	elif [[ $prev == "-e" && "${words[1]}" == @(record|stat|top) ]]; then
 		evts=$($cmd list --raw-dump)
 		COMPREPLY=( $( compgen -W '$evts' -- "$cur" ) )
 		__ltrim_colon_completions $cur
 	# List long option names
 	elif [[ $cur == --* ]];  then
-		subcmd=${COMP_WORDS[1]}
+		subcmd=${words[1]}
 		opts=$($cmd $subcmd --list-opts)
 		COMPREPLY=( $( compgen -W '$opts' -- "$cur" ) )
-	# Fall down to list regular files
-	else
-		_filedir
 	fi
 } &&
-complete -F _perf perf
+
+complete -o bashdefault -o default -o nospace -F _perf perf 2>/dev/null \
+	|| complete -o default -o nospace -F _perf perf
diff --git a/tools/perf/bench/mem-memcpy-arch.h b/tools/perf/bench/mem-memcpy-arch.h
index a72e36c..57b4ed8 100644
--- a/tools/perf/bench/mem-memcpy-arch.h
+++ b/tools/perf/bench/mem-memcpy-arch.h
@@ -1,5 +1,5 @@
 
-#ifdef ARCH_X86_64
+#ifdef HAVE_ARCH_X86_64_SUPPORT
 
 #define MEMCPY_FN(fn, name, desc)		\
 	extern void *fn(void *, const void *, size_t);
diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c
index 8cdca43..5ce71d3 100644
--- a/tools/perf/bench/mem-memcpy.c
+++ b/tools/perf/bench/mem-memcpy.c
@@ -58,7 +58,7 @@
 	{ "default",
 	  "Default memcpy() provided by glibc",
 	  memcpy },
-#ifdef ARCH_X86_64
+#ifdef HAVE_ARCH_X86_64_SUPPORT
 
 #define MEMCPY_FN(fn, name, desc) { name, desc, fn },
 #include "mem-memcpy-x86-64-asm-def.h"
diff --git a/tools/perf/bench/mem-memset-arch.h b/tools/perf/bench/mem-memset-arch.h
index a040fa7..633800c 100644
--- a/tools/perf/bench/mem-memset-arch.h
+++ b/tools/perf/bench/mem-memset-arch.h
@@ -1,5 +1,5 @@
 
-#ifdef ARCH_X86_64
+#ifdef HAVE_ARCH_X86_64_SUPPORT
 
 #define MEMSET_FN(fn, name, desc)		\
 	extern void *fn(void *, int, size_t);
diff --git a/tools/perf/bench/mem-memset.c b/tools/perf/bench/mem-memset.c
index 4a2f120..9af79d2 100644
--- a/tools/perf/bench/mem-memset.c
+++ b/tools/perf/bench/mem-memset.c
@@ -58,7 +58,7 @@
 	{ "default",
 	  "Default memset() provided by glibc",
 	  memset },
-#ifdef ARCH_X86_64
+#ifdef HAVE_ARCH_X86_64_SUPPORT
 
 #define MEMSET_FN(fn, name, desc) { name, desc, fn },
 #include "mem-memset-x86-64-asm-def.h"
diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c
index 30d1c322..d4c83c6 100644
--- a/tools/perf/bench/numa.c
+++ b/tools/perf/bench/numa.c
@@ -429,14 +429,14 @@
 	return 0;
 }
 
-static void parse_setup_cpu_list(void)
+static int parse_setup_cpu_list(void)
 {
 	struct thread_data *td;
 	char *str0, *str;
 	int t;
 
 	if (!g->p.cpu_list_str)
-		return;
+		return 0;
 
 	dprintf("g->p.nr_tasks: %d\n", g->p.nr_tasks);
 
@@ -500,8 +500,12 @@
 
 		dprintf("CPUs: %d_%d-%d#%dx%d\n", bind_cpu_0, bind_len, bind_cpu_1, step, mul);
 
-		BUG_ON(bind_cpu_0 < 0 || bind_cpu_0 >= g->p.nr_cpus);
-		BUG_ON(bind_cpu_1 < 0 || bind_cpu_1 >= g->p.nr_cpus);
+		if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >= g->p.nr_cpus) {
+			printf("\nTest not applicable, system has only %d CPUs.\n", g->p.nr_cpus);
+			return -1;
+		}
+
+		BUG_ON(bind_cpu_0 < 0 || bind_cpu_1 < 0);
 		BUG_ON(bind_cpu_0 > bind_cpu_1);
 
 		for (bind_cpu = bind_cpu_0; bind_cpu <= bind_cpu_1; bind_cpu += step) {
@@ -541,6 +545,7 @@
 		printf("# NOTE: %d tasks bound, %d tasks unbound\n", t, g->p.nr_tasks - t);
 
 	free(str0);
+	return 0;
 }
 
 static int parse_cpus_opt(const struct option *opt __maybe_unused,
@@ -561,14 +566,14 @@
 	return 0;
 }
 
-static void parse_setup_node_list(void)
+static int parse_setup_node_list(void)
 {
 	struct thread_data *td;
 	char *str0, *str;
 	int t;
 
 	if (!g->p.node_list_str)
-		return;
+		return 0;
 
 	dprintf("g->p.nr_tasks: %d\n", g->p.nr_tasks);
 
@@ -619,8 +624,12 @@
 
 		dprintf("NODEs: %d-%d #%d\n", bind_node_0, bind_node_1, step);
 
-		BUG_ON(bind_node_0 < 0 || bind_node_0 >= g->p.nr_nodes);
-		BUG_ON(bind_node_1 < 0 || bind_node_1 >= g->p.nr_nodes);
+		if (bind_node_0 >= g->p.nr_nodes || bind_node_1 >= g->p.nr_nodes) {
+			printf("\nTest not applicable, system has only %d nodes.\n", g->p.nr_nodes);
+			return -1;
+		}
+
+		BUG_ON(bind_node_0 < 0 || bind_node_1 < 0);
 		BUG_ON(bind_node_0 > bind_node_1);
 
 		for (bind_node = bind_node_0; bind_node <= bind_node_1; bind_node += step) {
@@ -651,6 +660,7 @@
 		printf("# NOTE: %d tasks mem-bound, %d tasks unbound\n", t, g->p.nr_tasks - t);
 
 	free(str0);
+	return 0;
 }
 
 static int parse_nodes_opt(const struct option *opt __maybe_unused,
@@ -1110,7 +1120,7 @@
 		/* Check whether our max runtime timed out: */
 		if (g->p.nr_secs) {
 			timersub(&stop, &start0, &diff);
-			if (diff.tv_sec >= g->p.nr_secs) {
+			if ((u32)diff.tv_sec >= g->p.nr_secs) {
 				g->stop_work = true;
 				break;
 			}
@@ -1157,7 +1167,7 @@
 			runtime_ns_max += diff.tv_usec * 1000;
 
 			if (details >= 0) {
-				printf(" #%2d / %2d: %14.2lf nsecs/op [val: %016lx]\n",
+				printf(" #%2d / %2d: %14.2lf nsecs/op [val: %016"PRIx64"]\n",
 					process_nr, thread_nr, runtime_ns_max / bytes_done, val);
 			}
 			fflush(stdout);
@@ -1356,8 +1366,8 @@
 	init_thread_data();
 
 	tprintf("#\n");
-	parse_setup_cpu_list();
-	parse_setup_node_list();
+	if (parse_setup_cpu_list() || parse_setup_node_list())
+		return -1;
 	tprintf("#\n");
 
 	print_summary();
@@ -1600,7 +1610,6 @@
 	return 0;
 
 err:
-	usage_with_options(numa_usage, options);
 	return -1;
 }
 
@@ -1701,8 +1710,7 @@
 	BUG_ON(ret < 0);
 
 	for (i = 0; i < nr; i++) {
-		if (run_bench_numa(tests[i][0], tests[i] + 1))
-			return -1;
+		run_bench_numa(tests[i][0], tests[i] + 1);
 	}
 
 	printf("\n");
diff --git a/tools/perf/bench/sched-pipe.c b/tools/perf/bench/sched-pipe.c
index 69cfba8..07a8d76 100644
--- a/tools/perf/bench/sched-pipe.c
+++ b/tools/perf/bench/sched-pipe.c
@@ -7,9 +7,7 @@
  * Based on pipe-test-1m.c by Ingo Molnar <mingo@redhat.com>
  *  http://people.redhat.com/mingo/cfs-scheduler/tools/pipe-test-1m.c
  * Ported to perf by Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
- *
  */
-
 #include "../perf.h"
 #include "../util/util.h"
 #include "../util/parse-options.h"
@@ -28,12 +26,24 @@
 #include <sys/time.h>
 #include <sys/types.h>
 
+#include <pthread.h>
+
+struct thread_data {
+	int			nr;
+	int			pipe_read;
+	int			pipe_write;
+	pthread_t		pthread;
+};
+
 #define LOOPS_DEFAULT 1000000
-static int loops = LOOPS_DEFAULT;
+static	int			loops = LOOPS_DEFAULT;
+
+/* Use processes by default: */
+static bool			threaded;
 
 static const struct option options[] = {
-	OPT_INTEGER('l', "loop", &loops,
-		    "Specify number of loops"),
+	OPT_INTEGER('l', "loop",	&loops,		"Specify number of loops"),
+	OPT_BOOLEAN('T', "threaded",	&threaded,	"Specify threads/process based task setup"),
 	OPT_END()
 };
 
@@ -42,13 +52,37 @@
 	NULL
 };
 
-int bench_sched_pipe(int argc, const char **argv,
-		     const char *prefix __maybe_unused)
+static void *worker_thread(void *__tdata)
 {
-	int pipe_1[2], pipe_2[2];
+	struct thread_data *td = __tdata;
 	int m = 0, i;
+	int ret;
+
+	for (i = 0; i < loops; i++) {
+		if (!td->nr) {
+			ret = read(td->pipe_read, &m, sizeof(int));
+			BUG_ON(ret != sizeof(int));
+			ret = write(td->pipe_write, &m, sizeof(int));
+			BUG_ON(ret != sizeof(int));
+		} else {
+			ret = write(td->pipe_write, &m, sizeof(int));
+			BUG_ON(ret != sizeof(int));
+			ret = read(td->pipe_read, &m, sizeof(int));
+			BUG_ON(ret != sizeof(int));
+		}
+	}
+
+	return NULL;
+}
+
+int bench_sched_pipe(int argc, const char **argv, const char *prefix __maybe_unused)
+{
+	struct thread_data threads[2], *td;
+	int pipe_1[2], pipe_2[2];
 	struct timeval start, stop, diff;
 	unsigned long long result_usec = 0;
+	int nr_threads = 2;
+	int t;
 
 	/*
 	 * why does "ret" exist?
@@ -58,43 +92,66 @@
 	int __maybe_unused ret, wait_stat;
 	pid_t pid, retpid __maybe_unused;
 
-	argc = parse_options(argc, argv, options,
-			     bench_sched_pipe_usage, 0);
+	argc = parse_options(argc, argv, options, bench_sched_pipe_usage, 0);
 
 	BUG_ON(pipe(pipe_1));
 	BUG_ON(pipe(pipe_2));
 
-	pid = fork();
-	assert(pid >= 0);
-
 	gettimeofday(&start, NULL);
 
-	if (!pid) {
-		for (i = 0; i < loops; i++) {
-			ret = read(pipe_1[0], &m, sizeof(int));
-			ret = write(pipe_2[1], &m, sizeof(int));
+	for (t = 0; t < nr_threads; t++) {
+		td = threads + t;
+
+		td->nr = t;
+
+		if (t == 0) {
+			td->pipe_read = pipe_1[0];
+			td->pipe_write = pipe_2[1];
+		} else {
+			td->pipe_write = pipe_1[1];
+			td->pipe_read = pipe_2[0];
 		}
+	}
+
+
+	if (threaded) {
+
+		for (t = 0; t < nr_threads; t++) {
+			td = threads + t;
+
+			ret = pthread_create(&td->pthread, NULL, worker_thread, td);
+			BUG_ON(ret);
+		}
+
+		for (t = 0; t < nr_threads; t++) {
+			td = threads + t;
+
+			ret = pthread_join(td->pthread, NULL);
+			BUG_ON(ret);
+		}
+
 	} else {
-		for (i = 0; i < loops; i++) {
-			ret = write(pipe_1[1], &m, sizeof(int));
-			ret = read(pipe_2[0], &m, sizeof(int));
+		pid = fork();
+		assert(pid >= 0);
+
+		if (!pid) {
+			worker_thread(threads + 0);
+			exit(0);
+		} else {
+			worker_thread(threads + 1);
 		}
+
+		retpid = waitpid(pid, &wait_stat, 0);
+		assert((retpid == pid) && WIFEXITED(wait_stat));
 	}
 
 	gettimeofday(&stop, NULL);
 	timersub(&stop, &start, &diff);
 
-	if (pid) {
-		retpid = waitpid(pid, &wait_stat, 0);
-		assert((retpid == pid) && WIFEXITED(wait_stat));
-	} else {
-		exit(0);
-	}
-
 	switch (bench_format) {
 	case BENCH_FORMAT_DEFAULT:
-		printf("# Executed %d pipe operations between two tasks\n\n",
-			loops);
+		printf("# Executed %d pipe operations between two %s\n\n",
+			loops, threaded ? "threads" : "processes");
 
 		result_usec = diff.tv_sec * 1000000;
 		result_usec += diff.tv_usec;
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 5ebd0c3..4087ab1 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -28,8 +28,10 @@
 #include "util/hist.h"
 #include "util/session.h"
 #include "util/tool.h"
+#include "util/data.h"
 #include "arch/common.h"
 
+#include <dlfcn.h>
 #include <linux/bitmap.h>
 
 struct perf_annotate {
@@ -63,7 +65,7 @@
 		return 0;
 	}
 
-	he = __hists__add_entry(&evsel->hists, al, NULL, 1, 1);
+	he = __hists__add_entry(&evsel->hists, al, NULL, NULL, NULL, 1, 1, 0);
 	if (he == NULL)
 		return -ENOMEM;
 
@@ -116,11 +118,11 @@
 				    ann->print_line, ann->full_paths, 0, 0);
 }
 
-static void hists__find_annotations(struct hists *self,
+static void hists__find_annotations(struct hists *hists,
 				    struct perf_evsel *evsel,
 				    struct perf_annotate *ann)
 {
-	struct rb_node *nd = rb_first(&self->entries), *next;
+	struct rb_node *nd = rb_first(&hists->entries), *next;
 	int key = K_RIGHT;
 
 	while (nd) {
@@ -142,8 +144,18 @@
 
 		if (use_browser == 2) {
 			int ret;
+			int (*annotate)(struct hist_entry *he,
+					struct perf_evsel *evsel,
+					struct hist_browser_timer *hbt);
 
-			ret = hist_entry__gtk_annotate(he, evsel, NULL);
+			annotate = dlsym(perf_gtk_handle,
+					 "hist_entry__gtk_annotate");
+			if (annotate == NULL) {
+				ui__error("GTK browser not found!\n");
+				return;
+			}
+
+			ret = annotate(he, evsel, NULL);
 			if (!ret || !ann->skip_missing)
 				return;
 
@@ -188,9 +200,13 @@
 	struct perf_session *session;
 	struct perf_evsel *pos;
 	u64 total_nr_samples;
+	struct perf_data_file file = {
+		.path  = input_name,
+		.mode  = PERF_DATA_MODE_READ,
+		.force = ann->force,
+	};
 
-	session = perf_session__new(input_name, O_RDONLY,
-				    ann->force, false, &ann->tool);
+	session = perf_session__new(&file, false, &ann->tool);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -231,7 +247,7 @@
 
 		if (nr_samples > 0) {
 			total_nr_samples += nr_samples;
-			hists__collapse_resort(hists);
+			hists__collapse_resort(hists, NULL);
 			hists__output_resort(hists);
 
 			if (symbol_conf.event_group &&
@@ -243,12 +259,21 @@
 	}
 
 	if (total_nr_samples == 0) {
-		ui__error("The %s file has no samples!\n", session->filename);
+		ui__error("The %s file has no samples!\n", file.path);
 		goto out_delete;
 	}
 
-	if (use_browser == 2)
-		perf_gtk__show_annotations();
+	if (use_browser == 2) {
+		void (*show_annotations)(void);
+
+		show_annotations = dlsym(perf_gtk_handle,
+					 "perf_gtk__show_annotations");
+		if (show_annotations == NULL) {
+			ui__error("GTK browser not found!\n");
+			goto out_delete;
+		}
+		show_annotations();
+	}
 
 out_delete:
 	/*
diff --git a/tools/perf/builtin-bench.c b/tools/perf/builtin-bench.c
index 77298bf..e47f90c 100644
--- a/tools/perf/builtin-bench.c
+++ b/tools/perf/builtin-bench.c
@@ -1,21 +1,18 @@
 /*
- *
  * builtin-bench.c
  *
- * General benchmarking subsystem provided by perf
+ * General benchmarking collections provided by perf
  *
  * Copyright (C) 2009, Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
- *
  */
 
 /*
+ * Available benchmark collection list:
  *
- * Available subsystem list:
- *  sched ... scheduler and IPC mechanism
+ *  sched ... scheduler and IPC performance
  *  mem   ... memory access performance
- *
+ *  numa  ... NUMA scheduling and MM performance
  */
-
 #include "perf.h"
 #include "util/util.h"
 #include "util/parse-options.h"
@@ -25,112 +22,92 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <sys/prctl.h>
 
-struct bench_suite {
-	const char *name;
-	const char *summary;
-	int (*fn)(int, const char **, const char *);
+typedef int (*bench_fn_t)(int argc, const char **argv, const char *prefix);
+
+struct bench {
+	const char	*name;
+	const char	*summary;
+	bench_fn_t	fn;
 };
-						\
-/* sentinel: easy for help */
-#define suite_all { "all", "Test all benchmark suites", NULL }
 
-#ifdef LIBNUMA_SUPPORT
-static struct bench_suite numa_suites[] = {
-	{ "mem",
-	  "Benchmark for NUMA workloads",
-	  bench_numa },
-	suite_all,
-	{ NULL,
-	  NULL,
-	  NULL                  }
+#ifdef HAVE_LIBNUMA_SUPPORT
+static struct bench numa_benchmarks[] = {
+	{ "mem",	"Benchmark for NUMA workloads",			bench_numa		},
+	{ "all",	"Test all NUMA benchmarks",			NULL			},
+	{ NULL,		NULL,						NULL			}
 };
 #endif
 
-static struct bench_suite sched_suites[] = {
-	{ "messaging",
-	  "Benchmark for scheduler and IPC mechanisms",
-	  bench_sched_messaging },
-	{ "pipe",
-	  "Flood of communication over pipe() between two processes",
-	  bench_sched_pipe      },
-	suite_all,
-	{ NULL,
-	  NULL,
-	  NULL                  }
+static struct bench sched_benchmarks[] = {
+	{ "messaging",	"Benchmark for scheduling and IPC",		bench_sched_messaging	},
+	{ "pipe",	"Benchmark for pipe() between two processes",	bench_sched_pipe	},
+	{ "all",	"Test all scheduler benchmarks",		NULL			},
+	{ NULL,		NULL,						NULL			}
 };
 
-static struct bench_suite mem_suites[] = {
-	{ "memcpy",
-	  "Simple memory copy in various ways",
-	  bench_mem_memcpy },
-	{ "memset",
-	  "Simple memory set in various ways",
-	  bench_mem_memset },
-	suite_all,
-	{ NULL,
-	  NULL,
-	  NULL             }
+static struct bench mem_benchmarks[] = {
+	{ "memcpy",	"Benchmark for memcpy()",			bench_mem_memcpy	},
+	{ "memset",	"Benchmark for memset() tests",			bench_mem_memset	},
+	{ "all",	"Test all memory benchmarks",			NULL			},
+	{ NULL,		NULL,						NULL			}
 };
 
-struct bench_subsys {
-	const char *name;
-	const char *summary;
-	struct bench_suite *suites;
+struct collection {
+	const char	*name;
+	const char	*summary;
+	struct bench	*benchmarks;
 };
 
-static struct bench_subsys subsystems[] = {
-#ifdef LIBNUMA_SUPPORT
-	{ "numa",
-	  "NUMA scheduling and MM behavior",
-	  numa_suites },
+static struct collection collections[] = {
+	{ "sched",	"Scheduler and IPC benchmarks",		sched_benchmarks	},
+	{ "mem",	"Memory access benchmarks",			mem_benchmarks		},
+#ifdef HAVE_LIBNUMA_SUPPORT
+	{ "numa",	"NUMA scheduling and MM benchmarks",		numa_benchmarks		},
 #endif
-	{ "sched",
-	  "scheduler and IPC mechanism",
-	  sched_suites },
-	{ "mem",
-	  "memory access performance",
-	  mem_suites },
-	{ "all",		/* sentinel: easy for help */
-	  "all benchmark subsystem",
-	  NULL },
-	{ NULL,
-	  NULL,
-	  NULL       }
+	{ "all",	"All benchmarks",				NULL			},
+	{ NULL,		NULL,						NULL			}
 };
 
-static void dump_suites(int subsys_index)
+/* Iterate over all benchmark collections: */
+#define for_each_collection(coll) \
+	for (coll = collections; coll->name; coll++)
+
+/* Iterate over all benchmarks within a collection: */
+#define for_each_bench(coll, bench) \
+	for (bench = coll->benchmarks; bench->name; bench++)
+
+static void dump_benchmarks(struct collection *coll)
 {
-	int i;
+	struct bench *bench;
 
-	printf("# List of available suites for %s...\n\n",
-	       subsystems[subsys_index].name);
+	printf("\n        # List of available benchmarks for collection '%s':\n\n", coll->name);
 
-	for (i = 0; subsystems[subsys_index].suites[i].name; i++)
-		printf("%14s: %s\n",
-		       subsystems[subsys_index].suites[i].name,
-		       subsystems[subsys_index].suites[i].summary);
+	for_each_bench(coll, bench)
+		printf("%14s: %s\n", bench->name, bench->summary);
 
 	printf("\n");
-	return;
 }
 
 static const char *bench_format_str;
+
+/* Output/formatting style, exported to benchmark modules: */
 int bench_format = BENCH_FORMAT_DEFAULT;
 
 static const struct option bench_options[] = {
-	OPT_STRING('f', "format", &bench_format_str, "default",
-		    "Specify format style"),
+	OPT_STRING('f', "format", &bench_format_str, "default", "Specify format style"),
 	OPT_END()
 };
 
 static const char * const bench_usage[] = {
-	"perf bench [<common options>] <subsystem> <suite> [<options>]",
+	"perf bench [<common options>] <collection> <benchmark> [<options>]",
 	NULL
 };
 
 static void print_usage(void)
 {
+	struct collection *coll;
 	int i;
 
 	printf("Usage: \n");
@@ -138,11 +115,10 @@
 		printf("\t%s\n", bench_usage[i]);
 	printf("\n");
 
-	printf("# List of available subsystems...\n\n");
+	printf("        # List of all available benchmark collections:\n\n");
 
-	for (i = 0; subsystems[i].name; i++)
-		printf("%14s: %s\n",
-		       subsystems[i].name, subsystems[i].summary);
+	for_each_collection(coll)
+		printf("%14s: %s\n", coll->name, coll->summary);
 	printf("\n");
 }
 
@@ -159,44 +135,74 @@
 	return BENCH_FORMAT_UNKNOWN;
 }
 
-static void all_suite(struct bench_subsys *subsys)	  /* FROM HERE */
+/*
+ * Run a specific benchmark but first rename the running task's ->comm[]
+ * to something meaningful:
+ */
+static int run_bench(const char *coll_name, const char *bench_name, bench_fn_t fn,
+		     int argc, const char **argv, const char *prefix)
 {
-	int i;
+	int size;
+	char *name;
+	int ret;
+
+	size = strlen(coll_name) + 1 + strlen(bench_name) + 1;
+
+	name = zalloc(size);
+	BUG_ON(!name);
+
+	scnprintf(name, size, "%s-%s", coll_name, bench_name);
+
+	prctl(PR_SET_NAME, name);
+	argv[0] = name;
+
+	ret = fn(argc, argv, prefix);
+
+	free(name);
+
+	return ret;
+}
+
+static void run_collection(struct collection *coll)
+{
+	struct bench *bench;
 	const char *argv[2];
-	struct bench_suite *suites = subsys->suites;
 
 	argv[1] = NULL;
 	/*
 	 * TODO:
-	 * preparing preset parameters for
+	 *
+	 * Preparing preset parameters for
 	 * embedded, ordinary PC, HPC, etc...
-	 * will be helpful
+	 * would be helpful.
 	 */
-	for (i = 0; suites[i].fn; i++) {
-		printf("# Running %s/%s benchmark...\n",
-		       subsys->name,
-		       suites[i].name);
+	for_each_bench(coll, bench) {
+		if (!bench->fn)
+			break;
+		printf("# Running %s/%s benchmark...\n", coll->name, bench->name);
 		fflush(stdout);
 
-		argv[1] = suites[i].name;
-		suites[i].fn(1, argv, NULL);
+		argv[1] = bench->name;
+		run_bench(coll->name, bench->name, bench->fn, 1, argv, NULL);
 		printf("\n");
 	}
 }
 
-static void all_subsystem(void)
+static void run_all_collections(void)
 {
-	int i;
-	for (i = 0; subsystems[i].suites; i++)
-		all_suite(&subsystems[i]);
+	struct collection *coll;
+
+	for_each_collection(coll)
+		run_collection(coll);
 }
 
 int cmd_bench(int argc, const char **argv, const char *prefix __maybe_unused)
 {
-	int i, j, status = 0;
+	struct collection *coll;
+	int ret = 0;
 
 	if (argc < 2) {
-		/* No subsystem specified. */
+		/* No collection specified. */
 		print_usage();
 		goto end;
 	}
@@ -206,7 +212,7 @@
 
 	bench_format = bench_str2int(bench_format_str);
 	if (bench_format == BENCH_FORMAT_UNKNOWN) {
-		printf("Unknown format descriptor:%s\n", bench_format_str);
+		printf("Unknown format descriptor: '%s'\n", bench_format_str);
 		goto end;
 	}
 
@@ -216,52 +222,51 @@
 	}
 
 	if (!strcmp(argv[0], "all")) {
-		all_subsystem();
+		run_all_collections();
 		goto end;
 	}
 
-	for (i = 0; subsystems[i].name; i++) {
-		if (strcmp(subsystems[i].name, argv[0]))
+	for_each_collection(coll) {
+		struct bench *bench;
+
+		if (strcmp(coll->name, argv[0]))
 			continue;
 
 		if (argc < 2) {
-			/* No suite specified. */
-			dump_suites(i);
+			/* No bench specified. */
+			dump_benchmarks(coll);
 			goto end;
 		}
 
 		if (!strcmp(argv[1], "all")) {
-			all_suite(&subsystems[i]);
+			run_collection(coll);
 			goto end;
 		}
 
-		for (j = 0; subsystems[i].suites[j].name; j++) {
-			if (strcmp(subsystems[i].suites[j].name, argv[1]))
+		for_each_bench(coll, bench) {
+			if (strcmp(bench->name, argv[1]))
 				continue;
 
 			if (bench_format == BENCH_FORMAT_DEFAULT)
-				printf("# Running %s/%s benchmark...\n",
-				       subsystems[i].name,
-				       subsystems[i].suites[j].name);
+				printf("# Running '%s/%s' benchmark:\n", coll->name, bench->name);
 			fflush(stdout);
-			status = subsystems[i].suites[j].fn(argc - 1,
-							    argv + 1, prefix);
+			ret = run_bench(coll->name, bench->name, bench->fn, argc-1, argv+1, prefix);
 			goto end;
 		}
 
 		if (!strcmp(argv[1], "-h") || !strcmp(argv[1], "--help")) {
-			dump_suites(i);
+			dump_benchmarks(coll);
 			goto end;
 		}
 
-		printf("Unknown suite:%s for %s\n", argv[1], argv[0]);
-		status = 1;
+		printf("Unknown benchmark: '%s' for collection '%s'\n", argv[1], argv[0]);
+		ret = 1;
 		goto end;
 	}
 
-	printf("Unknown subsystem:%s\n", argv[0]);
-	status = 1;
+	printf("Unknown collection: '%s'\n", argv[0]);
+	ret = 1;
 
 end:
-	return status;
+	return ret;
 }
diff --git a/tools/perf/builtin-buildid-cache.c b/tools/perf/builtin-buildid-cache.c
index c96c8fa..cfede86 100644
--- a/tools/perf/builtin-buildid-cache.c
+++ b/tools/perf/builtin-buildid-cache.c
@@ -6,6 +6,11 @@
  * Copyright (C) 2010, Red Hat Inc.
  * Copyright (C) 2010, Arnaldo Carvalho de Melo <acme@redhat.com>
  */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+#include <dirent.h>
+#include <unistd.h>
 #include "builtin.h"
 #include "perf.h"
 #include "util/cache.h"
@@ -17,6 +22,140 @@
 #include "util/session.h"
 #include "util/symbol.h"
 
+static int build_id_cache__kcore_buildid(const char *proc_dir, char *sbuildid)
+{
+	char root_dir[PATH_MAX];
+	char notes[PATH_MAX];
+	u8 build_id[BUILD_ID_SIZE];
+	char *p;
+
+	strlcpy(root_dir, proc_dir, sizeof(root_dir));
+
+	p = strrchr(root_dir, '/');
+	if (!p)
+		return -1;
+	*p = '\0';
+
+	scnprintf(notes, sizeof(notes), "%s/sys/kernel/notes", root_dir);
+
+	if (sysfs__read_build_id(notes, build_id, sizeof(build_id)))
+		return -1;
+
+	build_id__sprintf(build_id, sizeof(build_id), sbuildid);
+
+	return 0;
+}
+
+static int build_id_cache__kcore_dir(char *dir, size_t sz)
+{
+	struct timeval tv;
+	struct tm tm;
+	char dt[32];
+
+	if (gettimeofday(&tv, NULL) || !localtime_r(&tv.tv_sec, &tm))
+		return -1;
+
+	if (!strftime(dt, sizeof(dt), "%Y%m%d%H%M%S", &tm))
+		return -1;
+
+	scnprintf(dir, sz, "%s%02u", dt, (unsigned)tv.tv_usec / 10000);
+
+	return 0;
+}
+
+static int build_id_cache__kcore_existing(const char *from_dir, char *to_dir,
+					  size_t to_dir_sz)
+{
+	char from[PATH_MAX];
+	char to[PATH_MAX];
+	struct dirent *dent;
+	int ret = -1;
+	DIR *d;
+
+	d = opendir(to_dir);
+	if (!d)
+		return -1;
+
+	scnprintf(from, sizeof(from), "%s/modules", from_dir);
+
+	while (1) {
+		dent = readdir(d);
+		if (!dent)
+			break;
+		if (dent->d_type != DT_DIR)
+			continue;
+		scnprintf(to, sizeof(to), "%s/%s/modules", to_dir,
+			  dent->d_name);
+		if (!compare_proc_modules(from, to)) {
+			scnprintf(to, sizeof(to), "%s/%s", to_dir,
+				  dent->d_name);
+			strlcpy(to_dir, to, to_dir_sz);
+			ret = 0;
+			break;
+		}
+	}
+
+	closedir(d);
+
+	return ret;
+}
+
+static int build_id_cache__add_kcore(const char *filename, const char *debugdir)
+{
+	char dir[32], sbuildid[BUILD_ID_SIZE * 2 + 1];
+	char from_dir[PATH_MAX], to_dir[PATH_MAX];
+	char *p;
+
+	strlcpy(from_dir, filename, sizeof(from_dir));
+
+	p = strrchr(from_dir, '/');
+	if (!p || strcmp(p + 1, "kcore"))
+		return -1;
+	*p = '\0';
+
+	if (build_id_cache__kcore_buildid(from_dir, sbuildid))
+		return -1;
+
+	scnprintf(to_dir, sizeof(to_dir), "%s/[kernel.kcore]/%s",
+		  debugdir, sbuildid);
+
+	if (!build_id_cache__kcore_existing(from_dir, to_dir, sizeof(to_dir))) {
+		pr_debug("same kcore found in %s\n", to_dir);
+		return 0;
+	}
+
+	if (build_id_cache__kcore_dir(dir, sizeof(dir)))
+		return -1;
+
+	scnprintf(to_dir, sizeof(to_dir), "%s/[kernel.kcore]/%s/%s",
+		  debugdir, sbuildid, dir);
+
+	if (mkdir_p(to_dir, 0755))
+		return -1;
+
+	if (kcore_copy(from_dir, to_dir)) {
+		/* Remove YYYYmmddHHMMSShh directory */
+		if (!rmdir(to_dir)) {
+			p = strrchr(to_dir, '/');
+			if (p)
+				*p = '\0';
+			/* Try to remove buildid directory */
+			if (!rmdir(to_dir)) {
+				p = strrchr(to_dir, '/');
+				if (p)
+					*p = '\0';
+				/* Try to remove [kernel.kcore] directory */
+				rmdir(to_dir);
+			}
+		}
+		return -1;
+	}
+
+	pr_debug("kcore added to build-id cache directory %s\n", to_dir);
+
+	return 0;
+}
+
 static int build_id_cache__add_file(const char *filename, const char *debugdir)
 {
 	char sbuild_id[BUILD_ID_SIZE * 2 + 1];
@@ -82,8 +221,12 @@
 
 static int build_id_cache__fprintf_missing(const char *filename, bool force, FILE *fp)
 {
-	struct perf_session *session = perf_session__new(filename, O_RDONLY,
-							 force, false, NULL);
+	struct perf_data_file file = {
+		.path  = filename,
+		.mode  = PERF_DATA_MODE_READ,
+		.force = force,
+	};
+	struct perf_session *session = perf_session__new(&file, false, NULL);
 	if (session == NULL)
 		return -1;
 
@@ -130,11 +273,14 @@
 	char const *add_name_list_str = NULL,
 		   *remove_name_list_str = NULL,
 		   *missing_filename = NULL,
-		   *update_name_list_str = NULL;
+		   *update_name_list_str = NULL,
+		   *kcore_filename;
 
 	const struct option buildid_cache_options[] = {
 	OPT_STRING('a', "add", &add_name_list_str,
 		   "file list", "file(s) to add"),
+	OPT_STRING('k', "kcore", &kcore_filename,
+		   "file", "kcore file to add"),
 	OPT_STRING('r', "remove", &remove_name_list_str, "file list",
 		    "file(s) to remove"),
 	OPT_STRING('M', "missing", &missing_filename, "file",
@@ -217,5 +363,9 @@
 		}
 	}
 
+	if (kcore_filename &&
+	    build_id_cache__add_kcore(kcore_filename, debugdir))
+		pr_warning("Couldn't add %s\n", kcore_filename);
+
 	return ret;
 }
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index e74366a..ed3873b 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -15,6 +15,7 @@
 #include "util/parse-options.h"
 #include "util/session.h"
 #include "util/symbol.h"
+#include "util/data.h"
 
 static int sysfs__fprintf_build_id(FILE *fp)
 {
@@ -52,6 +53,11 @@
 static int perf_session__list_build_ids(bool force, bool with_hits)
 {
 	struct perf_session *session;
+	struct perf_data_file file = {
+		.path  = input_name,
+		.mode  = PERF_DATA_MODE_READ,
+		.force = force,
+	};
 
 	symbol__elf_init();
 	/*
@@ -60,15 +66,14 @@
 	if (filename__fprintf_build_id(input_name, stdout))
 		goto out;
 
-	session = perf_session__new(input_name, O_RDONLY, force, false,
-				    &build_id__mark_dso_hit_ops);
+	session = perf_session__new(&file, false, &build_id__mark_dso_hit_ops);
 	if (session == NULL)
 		return -1;
 	/*
 	 * in pipe-mode, the only way to get the buildids is to parse
 	 * the record stream. Buildids are stored as RECORD_HEADER_BUILD_ID
 	 */
-	if (with_hits || session->fd_pipe)
+	if (with_hits || perf_data_file__is_pipe(&file))
 		perf_session__process_events(session, &build_id__mark_dso_hit_ops);
 
 	perf_session__fprintf_dsos_buildid(session, stdout, dso__skip_buildid, with_hits);
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index f28799e..3b67ea2 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -16,6 +16,7 @@
 #include "util/sort.h"
 #include "util/symbol.h"
 #include "util/util.h"
+#include "util/data.h"
 
 #include <stdlib.h>
 #include <math.h>
@@ -42,7 +43,7 @@
 
 struct data__file {
 	struct perf_session	*session;
-	const char		*file;
+	struct perf_data_file	file;
 	int			 idx;
 	struct hists		*hists;
 	struct diff_hpp_fmt	 fmt[PERF_HPP_DIFF__MAX_INDEX];
@@ -302,11 +303,12 @@
 	return -1;
 }
 
-static int hists__add_entry(struct hists *self,
+static int hists__add_entry(struct hists *hists,
 			    struct addr_location *al, u64 period,
-			    u64 weight)
+			    u64 weight, u64 transaction)
 {
-	if (__hists__add_entry(self, al, NULL, period, weight) != NULL)
+	if (__hists__add_entry(hists, al, NULL, NULL, NULL, period, weight,
+			       transaction) != NULL)
 		return 0;
 	return -ENOMEM;
 }
@@ -328,7 +330,8 @@
 	if (al.filtered)
 		return 0;
 
-	if (hists__add_entry(&evsel->hists, &al, sample->period, sample->weight)) {
+	if (hists__add_entry(&evsel->hists, &al, sample->period,
+			     sample->weight, sample->transaction)) {
 		pr_warning("problem incrementing symbol period, skipping event\n");
 		return -1;
 	}
@@ -367,7 +370,7 @@
 	list_for_each_entry(evsel, &evlist->entries, node) {
 		struct hists *hists = &evsel->hists;
 
-		hists__collapse_resort(hists);
+		hists__collapse_resort(hists, NULL);
 	}
 }
 
@@ -599,7 +602,7 @@
 
 	data__for_each_file(i, d)
 		fprintf(stdout, "#  [%d] %s %s\n",
-			d->idx, d->file,
+			d->idx, d->file.path,
 			!d->idx ? "(Baseline)" : "");
 
 	fprintf(stdout, "#\n");
@@ -661,17 +664,16 @@
 	int ret = -EINVAL, i;
 
 	data__for_each_file(i, d) {
-		d->session = perf_session__new(d->file, O_RDONLY, force,
-					       false, &tool);
+		d->session = perf_session__new(&d->file, false, &tool);
 		if (!d->session) {
-			pr_err("Failed to open %s\n", d->file);
+			pr_err("Failed to open %s\n", d->file.path);
 			ret = -ENOMEM;
 			goto out_delete;
 		}
 
 		ret = perf_session__process_events(d->session, &tool);
 		if (ret) {
-			pr_err("Failed to process %s\n", d->file);
+			pr_err("Failed to process %s\n", d->file.path);
 			goto out_delete;
 		}
 
@@ -1014,7 +1016,12 @@
 		return -ENOMEM;
 
 	data__for_each_file(i, d) {
-		d->file = use_default ? defaults[i] : argv[i];
+		struct perf_data_file *file = &d->file;
+
+		file->path  = use_default ? defaults[i] : argv[i];
+		file->mode  = PERF_DATA_MODE_READ,
+		file->force = force,
+
 		d->idx  = i;
 	}
 
diff --git a/tools/perf/builtin-evlist.c b/tools/perf/builtin-evlist.c
index 05bd9df..20b0f12 100644
--- a/tools/perf/builtin-evlist.c
+++ b/tools/perf/builtin-evlist.c
@@ -14,13 +14,18 @@
 #include "util/parse-events.h"
 #include "util/parse-options.h"
 #include "util/session.h"
+#include "util/data.h"
 
 static int __cmd_evlist(const char *file_name, struct perf_attr_details *details)
 {
 	struct perf_session *session;
 	struct perf_evsel *pos;
+	struct perf_data_file file = {
+		.path = file_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
 
-	session = perf_session__new(file_name, O_RDONLY, 0, false, NULL);
+	session = perf_session__new(&file, 0, NULL);
 	if (session == NULL)
 		return -ENOMEM;
 
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index afe377b..6a25085 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -15,6 +15,7 @@
 #include "util/tool.h"
 #include "util/debug.h"
 #include "util/build-id.h"
+#include "util/data.h"
 
 #include "util/parse-options.h"
 
@@ -71,12 +72,17 @@
 				   union perf_event *event,
 				   struct perf_evlist **pevlist)
 {
+	struct perf_inject *inject = container_of(tool, struct perf_inject,
+						  tool);
 	int ret;
 
 	ret = perf_event__process_attr(tool, event, pevlist);
 	if (ret)
 		return ret;
 
+	if (!inject->pipe_output)
+		return 0;
+
 	return perf_event__repipe_synth(tool, event);
 }
 
@@ -100,8 +106,8 @@
 				     struct perf_evsel *evsel,
 				     struct machine *machine)
 {
-	if (evsel->handler.func) {
-		inject_handler f = evsel->handler.func;
+	if (evsel->handler) {
+		inject_handler f = evsel->handler;
 		return f(tool, event, sample, evsel, machine);
 	}
 
@@ -161,38 +167,38 @@
 	return err;
 }
 
-static int dso__read_build_id(struct dso *self)
+static int dso__read_build_id(struct dso *dso)
 {
-	if (self->has_build_id)
+	if (dso->has_build_id)
 		return 0;
 
-	if (filename__read_build_id(self->long_name, self->build_id,
-				    sizeof(self->build_id)) > 0) {
-		self->has_build_id = true;
+	if (filename__read_build_id(dso->long_name, dso->build_id,
+				    sizeof(dso->build_id)) > 0) {
+		dso->has_build_id = true;
 		return 0;
 	}
 
 	return -1;
 }
 
-static int dso__inject_build_id(struct dso *self, struct perf_tool *tool,
+static int dso__inject_build_id(struct dso *dso, struct perf_tool *tool,
 				struct machine *machine)
 {
 	u16 misc = PERF_RECORD_MISC_USER;
 	int err;
 
-	if (dso__read_build_id(self) < 0) {
-		pr_debug("no build_id found for %s\n", self->long_name);
+	if (dso__read_build_id(dso) < 0) {
+		pr_debug("no build_id found for %s\n", dso->long_name);
 		return -1;
 	}
 
-	if (self->kernel)
+	if (dso->kernel)
 		misc = PERF_RECORD_MISC_KERNEL;
 
-	err = perf_event__synthesize_build_id(tool, self, misc, perf_event__repipe,
+	err = perf_event__synthesize_build_id(tool, dso, misc, perf_event__repipe,
 					      machine);
 	if (err) {
-		pr_err("Can't synthesize build_id event for %s\n", self->long_name);
+		pr_err("Can't synthesize build_id event for %s\n", dso->long_name);
 		return -1;
 	}
 
@@ -231,7 +237,7 @@
 				 * account this as unresolved.
 				 */
 			} else {
-#ifdef LIBELF_SUPPORT
+#ifdef HAVE_LIBELF_SUPPORT
 				pr_warning("no symbols found in %s, maybe "
 					   "install a debug package?\n",
 					   al.map->dso->long_name);
@@ -345,6 +351,10 @@
 {
 	struct perf_session *session;
 	int ret = -EINVAL;
+	struct perf_data_file file = {
+		.path = inject->input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
 
 	signal(SIGINT, sig_handler);
 
@@ -355,7 +365,7 @@
 		inject->tool.tracing_data = perf_event__repipe_tracing_data;
 	}
 
-	session = perf_session__new(inject->input_name, O_RDONLY, false, true, &inject->tool);
+	session = perf_session__new(&file, true, &inject->tool);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -373,11 +383,11 @@
 				if (perf_evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID"))
 					return -EINVAL;
 
-				evsel->handler.func = perf_inject__sched_switch;
+				evsel->handler = perf_inject__sched_switch;
 			} else if (!strcmp(name, "sched:sched_process_exit"))
-				evsel->handler.func = perf_inject__sched_process_exit;
+				evsel->handler = perf_inject__sched_process_exit;
 			else if (!strncmp(name, "sched:sched_stat_", 17))
-				evsel->handler.func = perf_inject__sched_stat;
+				evsel->handler = perf_inject__sched_stat;
 		}
 	}
 
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 9b5f077..929462a 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -13,6 +13,7 @@
 
 #include "util/parse-options.h"
 #include "util/trace-event.h"
+#include "util/data.h"
 
 #include "util/debug.h"
 
@@ -314,10 +315,10 @@
 		return -1;
 	}
 
-	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->tid);
+	dump_printf(" ... thread: %s:%d\n", thread__comm_str(thread), thread->tid);
 
-	if (evsel->handler.func != NULL) {
-		tracepoint_handler f = evsel->handler.func;
+	if (evsel->handler != NULL) {
+		tracepoint_handler f = evsel->handler;
 		return f(evsel, sample);
 	}
 
@@ -486,8 +487,12 @@
 		{ "kmem:kfree",			perf_evsel__process_free_event, },
     		{ "kmem:kmem_cache_free",	perf_evsel__process_free_event, },
 	};
+	struct perf_data_file file = {
+		.path = input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
 
-	session = perf_session__new(input_name, O_RDONLY, 0, false, &perf_kmem);
+	session = perf_session__new(&file, false, &perf_kmem);
 	if (session == NULL)
 		return -ENOMEM;
 
diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c
index fbc2888..cd9f920 100644
--- a/tools/perf/builtin-kvm.c
+++ b/tools/perf/builtin-kvm.c
@@ -17,9 +17,12 @@
 #include "util/tool.h"
 #include "util/stat.h"
 #include "util/top.h"
+#include "util/data.h"
 
 #include <sys/prctl.h>
+#ifdef HAVE_TIMERFD_SUPPORT
 #include <sys/timerfd.h>
+#endif
 
 #include <termios.h>
 #include <semaphore.h>
@@ -336,6 +339,7 @@
 		INIT_LIST_HEAD(&kvm->kvm_events_cache[i]);
 }
 
+#ifdef HAVE_TIMERFD_SUPPORT
 static void clear_events_cache_stats(struct list_head *kvm_events_cache)
 {
 	struct list_head *head;
@@ -357,6 +361,7 @@
 		}
 	}
 }
+#endif
 
 static int kvm_events_hash_fn(u64 key)
 {
@@ -782,6 +787,7 @@
 		pr_info("\nLost events: %" PRIu64 "\n\n", kvm->lost_events);
 }
 
+#ifdef HAVE_TIMERFD_SUPPORT
 static int process_lost_event(struct perf_tool *tool,
 			      union perf_event *event __maybe_unused,
 			      struct perf_sample *sample __maybe_unused,
@@ -792,6 +798,7 @@
 	kvm->lost_events++;
 	return 0;
 }
+#endif
 
 static bool skip_sample(struct perf_kvm_stat *kvm,
 			struct perf_sample *sample)
@@ -871,6 +878,7 @@
 	return true;
 }
 
+#ifdef HAVE_TIMERFD_SUPPORT
 /* keeping the max events to a modest level to keep
  * the processing of samples per mmap smooth.
  */
@@ -1212,6 +1220,7 @@
 out:
 	return rc;
 }
+#endif
 
 static int read_events(struct perf_kvm_stat *kvm)
 {
@@ -1222,10 +1231,13 @@
 		.comm			= perf_event__process_comm,
 		.ordered_samples	= true,
 	};
+	struct perf_data_file file = {
+		.path = input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
 
 	kvm->tool = eops;
-	kvm->session = perf_session__new(kvm->file_name, O_RDONLY, 0, false,
-					 &kvm->tool);
+	kvm->session = perf_session__new(&file, false, &kvm->tool);
 	if (!kvm->session) {
 		pr_err("Initializing perf session failed\n");
 		return -EINVAL;
@@ -1375,6 +1387,7 @@
 	return kvm_events_report_vcpu(kvm);
 }
 
+#ifdef HAVE_TIMERFD_SUPPORT
 static struct perf_evlist *kvm_live_event_list(void)
 {
 	struct perf_evlist *evlist;
@@ -1433,8 +1446,9 @@
 	const struct option live_options[] = {
 		OPT_STRING('p', "pid", &kvm->opts.target.pid, "pid",
 			"record events on existing process id"),
-		OPT_UINTEGER('m', "mmap-pages", &kvm->opts.mmap_pages,
-			"number of mmap data pages"),
+		OPT_CALLBACK('m', "mmap-pages", &kvm->opts.mmap_pages, "pages",
+			"number of mmap data pages",
+			perf_evlist__parse_mmap_pages),
 		OPT_INCR('v', "verbose", &verbose,
 			"be more verbose (show counter open errors, etc)"),
 		OPT_BOOLEAN('a', "all-cpus", &kvm->opts.target.system_wide,
@@ -1456,6 +1470,9 @@
 		"perf kvm stat live [<options>]",
 		NULL
 	};
+	struct perf_data_file file = {
+		.mode = PERF_DATA_MODE_WRITE,
+	};
 
 
 	/* event handling */
@@ -1520,7 +1537,7 @@
 	/*
 	 * perf session
 	 */
-	kvm->session = perf_session__new(NULL, O_WRONLY, false, false, &kvm->tool);
+	kvm->session = perf_session__new(&file, false, &kvm->tool);
 	if (kvm->session == NULL) {
 		err = -ENOMEM;
 		goto out;
@@ -1558,6 +1575,7 @@
 
 	return err;
 }
+#endif
 
 static void print_kvm_stat_usage(void)
 {
@@ -1596,8 +1614,10 @@
 	if (!strncmp(argv[1], "rep", 3))
 		return kvm_events_report(&kvm, argc - 1 , argv + 1);
 
+#ifdef HAVE_TIMERFD_SUPPORT
 	if (!strncmp(argv[1], "live", 4))
 		return kvm_events_live(&kvm, argc - 1 , argv + 1);
+#endif
 
 perf_stat:
 	return cmd_stat(argc, argv, NULL);
diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c
index e79f423..011195e 100644
--- a/tools/perf/builtin-list.c
+++ b/tools/perf/builtin-list.c
@@ -14,51 +14,63 @@
 #include "util/parse-events.h"
 #include "util/cache.h"
 #include "util/pmu.h"
+#include "util/parse-options.h"
 
 int cmd_list(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	int i;
+	const struct option list_options[] = {
+		OPT_END()
+	};
+	const char * const list_usage[] = {
+		"perf list [hw|sw|cache|tracepoint|pmu|event_glob]",
+		NULL
+	};
+
+	argc = parse_options(argc, argv, list_options, list_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+
 	setup_pager();
 
-	if (argc == 1)
+	if (argc == 0) {
 		print_events(NULL, false);
-	else {
-		int i;
+		return 0;
+	}
 
-		for (i = 1; i < argc; ++i) {
-			if (i > 2)
-				putchar('\n');
-			if (strncmp(argv[i], "tracepoint", 10) == 0)
-				print_tracepoint_events(NULL, NULL, false);
-			else if (strcmp(argv[i], "hw") == 0 ||
-				 strcmp(argv[i], "hardware") == 0)
-				print_events_type(PERF_TYPE_HARDWARE);
-			else if (strcmp(argv[i], "sw") == 0 ||
-				 strcmp(argv[i], "software") == 0)
-				print_events_type(PERF_TYPE_SOFTWARE);
-			else if (strcmp(argv[i], "cache") == 0 ||
-				 strcmp(argv[i], "hwcache") == 0)
-				print_hwcache_events(NULL, false);
-			else if (strcmp(argv[i], "pmu") == 0)
-				print_pmu_events(NULL, false);
-			else if (strcmp(argv[i], "--raw-dump") == 0)
-				print_events(NULL, true);
-			else {
-				char *sep = strchr(argv[i], ':'), *s;
-				int sep_idx;
+	for (i = 0; i < argc; ++i) {
+		if (i)
+			putchar('\n');
+		if (strncmp(argv[i], "tracepoint", 10) == 0)
+			print_tracepoint_events(NULL, NULL, false);
+		else if (strcmp(argv[i], "hw") == 0 ||
+			 strcmp(argv[i], "hardware") == 0)
+			print_events_type(PERF_TYPE_HARDWARE);
+		else if (strcmp(argv[i], "sw") == 0 ||
+			 strcmp(argv[i], "software") == 0)
+			print_events_type(PERF_TYPE_SOFTWARE);
+		else if (strcmp(argv[i], "cache") == 0 ||
+			 strcmp(argv[i], "hwcache") == 0)
+			print_hwcache_events(NULL, false);
+		else if (strcmp(argv[i], "pmu") == 0)
+			print_pmu_events(NULL, false);
+		else if (strcmp(argv[i], "--raw-dump") == 0)
+			print_events(NULL, true);
+		else {
+			char *sep = strchr(argv[i], ':'), *s;
+			int sep_idx;
 
-				if (sep == NULL) {
-					print_events(argv[i], false);
-					continue;
-				}
-				sep_idx = sep - argv[i];
-				s = strdup(argv[i]);
-				if (s == NULL)
-					return -1;
-
-				s[sep_idx] = '\0';
-				print_tracepoint_events(s, s + sep_idx + 1, false);
-				free(s);
+			if (sep == NULL) {
+				print_events(argv[i], false);
+				continue;
 			}
+			sep_idx = sep - argv[i];
+			s = strdup(argv[i]);
+			if (s == NULL)
+				return -1;
+
+			s[sep_idx] = '\0';
+			print_tracepoint_events(s, s + sep_idx + 1, false);
+			free(s);
 		}
 	}
 	return 0;
diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c
index ee33ba2..c852c7a 100644
--- a/tools/perf/builtin-lock.c
+++ b/tools/perf/builtin-lock.c
@@ -15,6 +15,7 @@
 #include "util/debug.h"
 #include "util/session.h"
 #include "util/tool.h"
+#include "util/data.h"
 
 #include <sys/types.h>
 #include <sys/prctl.h>
@@ -56,7 +57,9 @@
 
 	unsigned int		nr_readlock;
 	unsigned int		nr_trylock;
+
 	/* these times are in nano sec. */
+	u64                     avg_wait_time;
 	u64			wait_time_total;
 	u64			wait_time_min;
 	u64			wait_time_max;
@@ -208,6 +211,7 @@
 
 SINGLE_KEY(nr_acquired)
 SINGLE_KEY(nr_contended)
+SINGLE_KEY(avg_wait_time)
 SINGLE_KEY(wait_time_total)
 SINGLE_KEY(wait_time_max)
 
@@ -244,6 +248,7 @@
 struct lock_key keys[] = {
 	DEF_KEY_LOCK(acquired, nr_acquired),
 	DEF_KEY_LOCK(contended, nr_contended),
+	DEF_KEY_LOCK(avg_wait, avg_wait_time),
 	DEF_KEY_LOCK(wait_total, wait_time_total),
 	DEF_KEY_LOCK(wait_min, wait_time_min),
 	DEF_KEY_LOCK(wait_max, wait_time_max),
@@ -321,10 +326,12 @@
 
 	new->addr = addr;
 	new->name = zalloc(sizeof(char) * strlen(name) + 1);
-	if (!new->name)
+	if (!new->name) {
+		free(new);
 		goto alloc_failed;
-	strcpy(new->name, name);
+	}
 
+	strcpy(new->name, name);
 	new->wait_time_min = ULLONG_MAX;
 
 	list_add(&new->hash_entry, entry);
@@ -400,17 +407,17 @@
 
 	ls = lock_stat_findnew(addr, name);
 	if (!ls)
-		return -1;
+		return -ENOMEM;
 	if (ls->discard)
 		return 0;
 
 	ts = thread_stat_findnew(sample->tid);
 	if (!ts)
-		return -1;
+		return -ENOMEM;
 
 	seq = get_seq(ts, addr);
 	if (!seq)
-		return -1;
+		return -ENOMEM;
 
 	switch (seq->state) {
 	case SEQ_STATE_UNINITIALIZED:
@@ -446,7 +453,6 @@
 		list_del(&seq->list);
 		free(seq);
 		goto end;
-		break;
 	default:
 		BUG_ON("Unknown state of lock sequence found!\n");
 		break;
@@ -473,17 +479,17 @@
 
 	ls = lock_stat_findnew(addr, name);
 	if (!ls)
-		return -1;
+		return -ENOMEM;
 	if (ls->discard)
 		return 0;
 
 	ts = thread_stat_findnew(sample->tid);
 	if (!ts)
-		return -1;
+		return -ENOMEM;
 
 	seq = get_seq(ts, addr);
 	if (!seq)
-		return -1;
+		return -ENOMEM;
 
 	switch (seq->state) {
 	case SEQ_STATE_UNINITIALIZED:
@@ -508,8 +514,6 @@
 		list_del(&seq->list);
 		free(seq);
 		goto end;
-		break;
-
 	default:
 		BUG_ON("Unknown state of lock sequence found!\n");
 		break;
@@ -517,6 +521,7 @@
 
 	seq->state = SEQ_STATE_ACQUIRED;
 	ls->nr_acquired++;
+	ls->avg_wait_time = ls->nr_contended ? ls->wait_time_total/ls->nr_contended : 0;
 	seq->prev_event_time = sample->time;
 end:
 	return 0;
@@ -536,17 +541,17 @@
 
 	ls = lock_stat_findnew(addr, name);
 	if (!ls)
-		return -1;
+		return -ENOMEM;
 	if (ls->discard)
 		return 0;
 
 	ts = thread_stat_findnew(sample->tid);
 	if (!ts)
-		return -1;
+		return -ENOMEM;
 
 	seq = get_seq(ts, addr);
 	if (!seq)
-		return -1;
+		return -ENOMEM;
 
 	switch (seq->state) {
 	case SEQ_STATE_UNINITIALIZED:
@@ -564,7 +569,6 @@
 		list_del(&seq->list);
 		free(seq);
 		goto end;
-		break;
 	default:
 		BUG_ON("Unknown state of lock sequence found!\n");
 		break;
@@ -572,6 +576,7 @@
 
 	seq->state = SEQ_STATE_CONTENDED;
 	ls->nr_contended++;
+	ls->avg_wait_time = ls->wait_time_total/ls->nr_contended;
 	seq->prev_event_time = sample->time;
 end:
 	return 0;
@@ -591,22 +596,21 @@
 
 	ls = lock_stat_findnew(addr, name);
 	if (!ls)
-		return -1;
+		return -ENOMEM;
 	if (ls->discard)
 		return 0;
 
 	ts = thread_stat_findnew(sample->tid);
 	if (!ts)
-		return -1;
+		return -ENOMEM;
 
 	seq = get_seq(ts, addr);
 	if (!seq)
-		return -1;
+		return -ENOMEM;
 
 	switch (seq->state) {
 	case SEQ_STATE_UNINITIALIZED:
 		goto end;
-		break;
 	case SEQ_STATE_ACQUIRED:
 		break;
 	case SEQ_STATE_READ_ACQUIRED:
@@ -624,7 +628,6 @@
 		ls->discard = 1;
 		bad_hist[BROKEN_RELEASE]++;
 		goto free_seq;
-		break;
 	default:
 		BUG_ON("Unknown state of lock sequence found!\n");
 		break;
@@ -690,7 +693,7 @@
 
 	pr_info("\n=== output for debug===\n\n");
 	pr_info("bad: %d, total: %d\n", bad, total);
-	pr_info("bad rate: %f %%\n", (double)bad / (double)total * 100);
+	pr_info("bad rate: %.2f %%\n", (double)bad / (double)total * 100);
 	pr_info("histogram of events caused bad sequence\n");
 	for (i = 0; i < BROKEN_MAX; i++)
 		pr_info(" %10s: %d\n", name[i], bad_hist[i]);
@@ -707,6 +710,7 @@
 	pr_info("%10s ", "acquired");
 	pr_info("%10s ", "contended");
 
+	pr_info("%15s ", "avg wait (ns)");
 	pr_info("%15s ", "total wait (ns)");
 	pr_info("%15s ", "max wait (ns)");
 	pr_info("%15s ", "min wait (ns)");
@@ -738,6 +742,7 @@
 		pr_info("%10u ", st->nr_acquired);
 		pr_info("%10u ", st->nr_contended);
 
+		pr_info("%15" PRIu64 " ", st->avg_wait_time);
 		pr_info("%15" PRIu64 " ", st->wait_time_total);
 		pr_info("%15" PRIu64 " ", st->wait_time_max);
 		pr_info("%15" PRIu64 " ", st->wait_time_min == ULLONG_MAX ?
@@ -762,7 +767,7 @@
 	while (node) {
 		st = container_of(node, struct thread_stat, rb);
 		t = perf_session__findnew(session, st->tid);
-		pr_info("%10d: %s\n", st->tid, t->comm);
+		pr_info("%10d: %s\n", st->tid, thread__comm_str(t));
 		node = rb_next(node);
 	};
 }
@@ -814,42 +819,14 @@
 		return -1;
 	}
 
-	if (evsel->handler.func != NULL) {
-		tracepoint_handler f = evsel->handler.func;
+	if (evsel->handler != NULL) {
+		tracepoint_handler f = evsel->handler;
 		return f(evsel, sample);
 	}
 
 	return 0;
 }
 
-static const struct perf_evsel_str_handler lock_tracepoints[] = {
-	{ "lock:lock_acquire",	 perf_evsel__process_lock_acquire,   }, /* CONFIG_LOCKDEP */
-	{ "lock:lock_acquired",	 perf_evsel__process_lock_acquired,  }, /* CONFIG_LOCKDEP, CONFIG_LOCK_STAT */
-	{ "lock:lock_contended", perf_evsel__process_lock_contended, }, /* CONFIG_LOCKDEP, CONFIG_LOCK_STAT */
-	{ "lock:lock_release",	 perf_evsel__process_lock_release,   }, /* CONFIG_LOCKDEP */
-};
-
-static int read_events(void)
-{
-	struct perf_tool eops = {
-		.sample		 = process_sample_event,
-		.comm		 = perf_event__process_comm,
-		.ordered_samples = true,
-	};
-	session = perf_session__new(input_name, O_RDONLY, 0, false, &eops);
-	if (!session) {
-		pr_err("Initializing perf session failed\n");
-		return -1;
-	}
-
-	if (perf_session__set_tracepoints_handlers(session, lock_tracepoints)) {
-		pr_err("Initializing perf session tracepoint handlers failed\n");
-		return -1;
-	}
-
-	return perf_session__process_events(session, &eops);
-}
-
 static void sort_result(void)
 {
 	unsigned int i;
@@ -862,18 +839,58 @@
 	}
 }
 
-static int __cmd_report(void)
+static const struct perf_evsel_str_handler lock_tracepoints[] = {
+	{ "lock:lock_acquire",	 perf_evsel__process_lock_acquire,   }, /* CONFIG_LOCKDEP */
+	{ "lock:lock_acquired",	 perf_evsel__process_lock_acquired,  }, /* CONFIG_LOCKDEP, CONFIG_LOCK_STAT */
+	{ "lock:lock_contended", perf_evsel__process_lock_contended, }, /* CONFIG_LOCKDEP, CONFIG_LOCK_STAT */
+	{ "lock:lock_release",	 perf_evsel__process_lock_release,   }, /* CONFIG_LOCKDEP */
+};
+
+static int __cmd_report(bool display_info)
 {
+	int err = -EINVAL;
+	struct perf_tool eops = {
+		.sample		 = process_sample_event,
+		.comm		 = perf_event__process_comm,
+		.ordered_samples = true,
+	};
+	struct perf_data_file file = {
+		.path = input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
+
+	session = perf_session__new(&file, false, &eops);
+	if (!session) {
+		pr_err("Initializing perf session failed\n");
+		return -ENOMEM;
+	}
+
+	if (!perf_session__has_traces(session, "lock record"))
+		goto out_delete;
+
+	if (perf_session__set_tracepoints_handlers(session, lock_tracepoints)) {
+		pr_err("Initializing perf session tracepoint handlers failed\n");
+		goto out_delete;
+	}
+
+	if (select_key())
+		goto out_delete;
+
+	err = perf_session__process_events(session, &eops);
+	if (err)
+		goto out_delete;
+
 	setup_pager();
+	if (display_info) /* used for info subcommand */
+		err = dump_info();
+	else {
+		sort_result();
+		print_result();
+	}
 
-	if ((select_key() != 0) ||
-	    (read_events() != 0))
-		return -1;
-
-	sort_result();
-	print_result();
-
-	return 0;
+out_delete:
+	perf_session__delete(session);
+	return err;
 }
 
 static int __cmd_record(int argc, const char **argv)
@@ -881,7 +898,7 @@
 	const char *record_args[] = {
 		"record", "-R", "-m", "1024", "-c", "1",
 	};
-	unsigned int rec_argc, i, j;
+	unsigned int rec_argc, i, j, ret;
 	const char **rec_argv;
 
 	for (i = 0; i < ARRAY_SIZE(lock_tracepoints); i++) {
@@ -898,7 +915,7 @@
 	rec_argc += 2 * ARRAY_SIZE(lock_tracepoints);
 
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
-	if (rec_argv == NULL)
+	if (!rec_argv)
 		return -ENOMEM;
 
 	for (i = 0; i < ARRAY_SIZE(record_args); i++)
@@ -914,7 +931,9 @@
 
 	BUG_ON(i != rec_argc);
 
-	return cmd_record(i, rec_argv, NULL);
+	ret = cmd_record(i, rec_argv, NULL);
+	free(rec_argv);
+	return ret;
 }
 
 int cmd_lock(int argc, const char **argv, const char *prefix __maybe_unused)
@@ -934,7 +953,7 @@
 	};
 	const struct option report_options[] = {
 	OPT_STRING('k', "key", &sort_key, "acquired",
-		    "key for sorting (acquired / contended / wait_total / wait_max / wait_min)"),
+		    "key for sorting (acquired / contended / avg_wait / wait_total / wait_max / wait_min)"),
 	/* TODO: type */
 	OPT_END()
 	};
@@ -972,7 +991,7 @@
 			if (argc)
 				usage_with_options(report_usage, report_options);
 		}
-		__cmd_report();
+		rc = __cmd_report(false);
 	} else if (!strcmp(argv[0], "script")) {
 		/* Aliased to 'perf script' */
 		return cmd_script(argc, argv, prefix);
@@ -985,11 +1004,7 @@
 		}
 		/* recycling report_lock_ops */
 		trace_handler = &report_lock_ops;
-		setup_pager();
-		if (read_events() != 0)
-			rc = -1;
-		else
-			rc = dump_info();
+		rc = __cmd_report(true);
 	} else {
 		usage_with_options(lock_usage, lock_options);
 	}
diff --git a/tools/perf/builtin-mem.c b/tools/perf/builtin-mem.c
index 253133a..31c00f1 100644
--- a/tools/perf/builtin-mem.c
+++ b/tools/perf/builtin-mem.c
@@ -5,6 +5,7 @@
 #include "util/trace-event.h"
 #include "util/tool.h"
 #include "util/session.h"
+#include "util/data.h"
 
 #define MEM_OPERATION_LOAD	"load"
 #define MEM_OPERATION_STORE	"store"
@@ -119,10 +120,14 @@
 
 static int report_raw_events(struct perf_mem *mem)
 {
+	struct perf_data_file file = {
+		.path = input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
 	int err = -EINVAL;
 	int ret;
-	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
-							 0, false, &mem->tool);
+	struct perf_session *session = perf_session__new(&file, false,
+							 &mem->tool);
 
 	if (session == NULL)
 		return -ENOMEM;
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index e8a66f9..89acc17 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -173,7 +173,7 @@
 	if  (str && !params.target) {
 		if (!strcmp(opt->long_name, "exec"))
 			params.uprobes = true;
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 		else if (!strcmp(opt->long_name, "module"))
 			params.uprobes = false;
 #endif
@@ -187,7 +187,7 @@
 	return ret;
 }
 
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 static int opt_show_lines(const struct option *opt __maybe_unused,
 			  const char *str, int unset __maybe_unused)
 {
@@ -257,7 +257,7 @@
 		"perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]",
 		"perf probe [<options>] --del '[GROUP:]EVENT' ...",
 		"perf probe --list",
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 		"perf probe [<options>] --line 'LINEDESC'",
 		"perf probe [<options>] --vars 'PROBEPOINT'",
 #endif
@@ -271,7 +271,7 @@
 	OPT_CALLBACK('d', "del", NULL, "[GROUP:]EVENT", "delete a probe event.",
 		opt_del_probe_event),
 	OPT_CALLBACK('a', "add", NULL,
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 		"[EVENT=]FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT"
 		" [[NAME=]ARG ...]",
 #else
@@ -283,7 +283,7 @@
 		"\t\tFUNC:\tFunction name\n"
 		"\t\tOFF:\tOffset from function entry (in byte)\n"
 		"\t\t%return:\tPut the probe at function return\n"
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 		"\t\tSRC:\tSource code path\n"
 		"\t\tRL:\tRelative line number from function entry.\n"
 		"\t\tAL:\tAbsolute line number in file.\n"
@@ -296,7 +296,7 @@
 		opt_add_probe_event),
 	OPT_BOOLEAN('f', "force", &params.force_add, "forcibly add events"
 		    " with existing name"),
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 	OPT_CALLBACK('L', "line", NULL,
 		     "FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]",
 		     "Show source code lines.", opt_show_lines),
@@ -408,7 +408,7 @@
 		return ret;
 	}
 
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 	if (params.show_lines && !params.uprobes) {
 		if (params.mod_events) {
 			pr_err("  Error: Don't use --line with"
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index d046514..15280b5 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -24,12 +24,13 @@
 #include "util/symbol.h"
 #include "util/cpumap.h"
 #include "util/thread_map.h"
+#include "util/data.h"
 
 #include <unistd.h>
 #include <sched.h>
 #include <sys/mman.h>
 
-#ifndef HAVE_ON_EXIT
+#ifndef HAVE_ON_EXIT_SUPPORT
 #ifndef ATEXIT_MAX
 #define ATEXIT_MAX 32
 #endif
@@ -65,31 +66,25 @@
 	struct perf_tool	tool;
 	struct perf_record_opts	opts;
 	u64			bytes_written;
-	const char		*output_name;
+	struct perf_data_file	file;
 	struct perf_evlist	*evlist;
 	struct perf_session	*session;
 	const char		*progname;
-	int			output;
-	unsigned int		page_size;
 	int			realtime_prio;
 	bool			no_buildid;
 	bool			no_buildid_cache;
 	long			samples;
-	off_t			post_processing_offset;
 };
 
-static void advance_output(struct perf_record *rec, size_t size)
-{
-	rec->bytes_written += size;
-}
-
 static int write_output(struct perf_record *rec, void *buf, size_t size)
 {
+	struct perf_data_file *file = &rec->file;
+
 	while (size) {
-		int ret = write(rec->output, buf, size);
+		int ret = write(file->fd, buf, size);
 
 		if (ret < 0) {
-			pr_err("failed to write\n");
+			pr_err("failed to write perf data, error: %m\n");
 			return -1;
 		}
 
@@ -119,7 +114,7 @@
 {
 	unsigned int head = perf_mmap__read_head(md);
 	unsigned int old = md->prev;
-	unsigned char *data = md->base + rec->page_size;
+	unsigned char *data = md->base + page_size;
 	unsigned long size;
 	void *buf;
 	int rc = 0;
@@ -234,10 +229,6 @@
 			       "or try again with a smaller value of -m/--mmap_pages.\n"
 			       "(current value: %d)\n", opts->mmap_pages);
 			rc = -errno;
-		} else if (!is_power_of_2(opts->mmap_pages) &&
-			   (opts->mmap_pages != UINT_MAX)) {
-			pr_err("--mmap_pages/-m value must be a power of two.");
-			rc = -EINVAL;
 		} else {
 			pr_err("failed to mmap with %d (%s)\n", errno, strerror(errno));
 			rc = -errno;
@@ -253,31 +244,34 @@
 
 static int process_buildids(struct perf_record *rec)
 {
-	u64 size = lseek(rec->output, 0, SEEK_CUR);
+	struct perf_data_file *file  = &rec->file;
+	struct perf_session *session = rec->session;
+	u64 start = session->header.data_offset;
 
+	u64 size = lseek(file->fd, 0, SEEK_CUR);
 	if (size == 0)
 		return 0;
 
-	rec->session->fd = rec->output;
-	return __perf_session__process_events(rec->session, rec->post_processing_offset,
-					      size - rec->post_processing_offset,
+	return __perf_session__process_events(session, start,
+					      size - start,
 					      size, &build_id__mark_dso_hit_ops);
 }
 
 static void perf_record__exit(int status, void *arg)
 {
 	struct perf_record *rec = arg;
+	struct perf_data_file *file = &rec->file;
 
 	if (status != 0)
 		return;
 
-	if (!rec->opts.pipe_output) {
+	if (!file->is_pipe) {
 		rec->session->header.data_size += rec->bytes_written;
 
 		if (!rec->no_buildid)
 			process_buildids(rec);
 		perf_session__write_header(rec->session, rec->evlist,
-					   rec->output, true);
+					   file->fd, true);
 		perf_session__delete(rec->session);
 		perf_evlist__delete(rec->evlist);
 		symbol__exit();
@@ -343,70 +337,11 @@
 	return rc;
 }
 
-static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
+static void perf_record__init_features(struct perf_record *rec)
 {
-	struct stat st;
-	int flags;
-	int err, output, feat;
-	unsigned long waking = 0;
-	const bool forks = argc > 0;
-	struct machine *machine;
-	struct perf_tool *tool = &rec->tool;
-	struct perf_record_opts *opts = &rec->opts;
 	struct perf_evlist *evsel_list = rec->evlist;
-	const char *output_name = rec->output_name;
-	struct perf_session *session;
-	bool disabled = false;
-
-	rec->progname = argv[0];
-
-	rec->page_size = sysconf(_SC_PAGE_SIZE);
-
-	on_exit(perf_record__sig_exit, rec);
-	signal(SIGCHLD, sig_handler);
-	signal(SIGINT, sig_handler);
-	signal(SIGUSR1, sig_handler);
-	signal(SIGTERM, sig_handler);
-
-	if (!output_name) {
-		if (!fstat(STDOUT_FILENO, &st) && S_ISFIFO(st.st_mode))
-			opts->pipe_output = true;
-		else
-			rec->output_name = output_name = "perf.data";
-	}
-	if (output_name) {
-		if (!strcmp(output_name, "-"))
-			opts->pipe_output = true;
-		else if (!stat(output_name, &st) && st.st_size) {
-			char oldname[PATH_MAX];
-			snprintf(oldname, sizeof(oldname), "%s.old",
-				 output_name);
-			unlink(oldname);
-			rename(output_name, oldname);
-		}
-	}
-
-	flags = O_CREAT|O_RDWR|O_TRUNC;
-
-	if (opts->pipe_output)
-		output = STDOUT_FILENO;
-	else
-		output = open(output_name, flags, S_IRUSR | S_IWUSR);
-	if (output < 0) {
-		perror("failed to create output file");
-		return -1;
-	}
-
-	rec->output = output;
-
-	session = perf_session__new(output_name, O_WRONLY,
-				    true, false, NULL);
-	if (session == NULL) {
-		pr_err("Not enough memory for reading perf file header\n");
-		return -1;
-	}
-
-	rec->session = session;
+	struct perf_session *session = rec->session;
+	int feat;
 
 	for (feat = HEADER_FIRST_FEATURE; feat < HEADER_LAST_FEATURE; feat++)
 		perf_header__set_feat(&session->header, feat);
@@ -419,10 +354,42 @@
 
 	if (!rec->opts.branch_stack)
 		perf_header__clear_feat(&session->header, HEADER_BRANCH_STACK);
+}
+
+static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
+{
+	int err;
+	unsigned long waking = 0;
+	const bool forks = argc > 0;
+	struct machine *machine;
+	struct perf_tool *tool = &rec->tool;
+	struct perf_record_opts *opts = &rec->opts;
+	struct perf_evlist *evsel_list = rec->evlist;
+	struct perf_data_file *file = &rec->file;
+	struct perf_session *session;
+	bool disabled = false;
+
+	rec->progname = argv[0];
+
+	on_exit(perf_record__sig_exit, rec);
+	signal(SIGCHLD, sig_handler);
+	signal(SIGINT, sig_handler);
+	signal(SIGUSR1, sig_handler);
+	signal(SIGTERM, sig_handler);
+
+	session = perf_session__new(file, false, NULL);
+	if (session == NULL) {
+		pr_err("Not enough memory for reading perf file header\n");
+		return -1;
+	}
+
+	rec->session = session;
+
+	perf_record__init_features(rec);
 
 	if (forks) {
 		err = perf_evlist__prepare_workload(evsel_list, &opts->target,
-						    argv, opts->pipe_output,
+						    argv, file->is_pipe,
 						    true);
 		if (err < 0) {
 			pr_err("Couldn't run the workload!\n");
@@ -443,13 +410,13 @@
 	 */
 	on_exit(perf_record__exit, rec);
 
-	if (opts->pipe_output) {
-		err = perf_header__write_pipe(output);
+	if (file->is_pipe) {
+		err = perf_header__write_pipe(file->fd);
 		if (err < 0)
 			goto out_delete_session;
 	} else {
 		err = perf_session__write_header(session, evsel_list,
-						 output, false);
+						 file->fd, false);
 		if (err < 0)
 			goto out_delete_session;
 	}
@@ -462,11 +429,9 @@
 		goto out_delete_session;
 	}
 
-	rec->post_processing_offset = lseek(output, 0, SEEK_CUR);
-
 	machine = &session->machines.host;
 
-	if (opts->pipe_output) {
+	if (file->is_pipe) {
 		err = perf_event__synthesize_attrs(tool, session,
 						   process_synthesized_event);
 		if (err < 0) {
@@ -483,13 +448,13 @@
 			 * return this more properly and also
 			 * propagate errors that now are calling die()
 			 */
-			err = perf_event__synthesize_tracing_data(tool, output, evsel_list,
+			err = perf_event__synthesize_tracing_data(tool, file->fd, evsel_list,
 								  process_synthesized_event);
 			if (err <= 0) {
 				pr_err("Couldn't record tracing data.\n");
 				goto out_delete_session;
 			}
-			advance_output(rec, err);
+			rec->bytes_written += err;
 		}
 	}
 
@@ -590,7 +555,7 @@
 	fprintf(stderr,
 		"[ perf record: Captured and wrote %.3f MB %s (~%" PRIu64 " samples) ]\n",
 		(double)rec->bytes_written / 1024.0 / 1024.0,
-		output_name,
+		file->path,
 		rec->bytes_written / 24);
 
 	return 0;
@@ -618,6 +583,9 @@
 	BRANCH_OPT("any_call", PERF_SAMPLE_BRANCH_ANY_CALL),
 	BRANCH_OPT("any_ret", PERF_SAMPLE_BRANCH_ANY_RETURN),
 	BRANCH_OPT("ind_call", PERF_SAMPLE_BRANCH_IND_CALL),
+	BRANCH_OPT("abort_tx", PERF_SAMPLE_BRANCH_ABORT_TX),
+	BRANCH_OPT("in_tx", PERF_SAMPLE_BRANCH_IN_TX),
+	BRANCH_OPT("no_tx", PERF_SAMPLE_BRANCH_NO_TX),
 	BRANCH_END
 };
 
@@ -684,7 +652,7 @@
 	return ret;
 }
 
-#ifdef LIBUNWIND_SUPPORT
+#ifdef HAVE_LIBUNWIND_SUPPORT
 static int get_stack_size(char *str, unsigned long *_size)
 {
 	char *endptr;
@@ -710,7 +678,7 @@
 	       max_size, str);
 	return -1;
 }
-#endif /* LIBUNWIND_SUPPORT */
+#endif /* HAVE_LIBUNWIND_SUPPORT */
 
 int record_parse_callchain(const char *arg, struct perf_record_opts *opts)
 {
@@ -739,7 +707,7 @@
 				       "needed for -g fp\n");
 			break;
 
-#ifdef LIBUNWIND_SUPPORT
+#ifdef HAVE_LIBUNWIND_SUPPORT
 		/* Dwarf style */
 		} else if (!strncmp(name, "dwarf", sizeof("dwarf"))) {
 			const unsigned long default_stack_dump_size = 8192;
@@ -755,7 +723,7 @@
 				ret = get_stack_size(tok, &size);
 				opts->stack_dump_size = size;
 			}
-#endif /* LIBUNWIND_SUPPORT */
+#endif /* HAVE_LIBUNWIND_SUPPORT */
 		} else {
 			pr_err("callchain: Unknown --call-graph option "
 			       "value: %s\n", arg);
@@ -841,7 +809,7 @@
 
 #define CALLCHAIN_HELP "setup and enables call-graph (stack chain/backtrace) recording: "
 
-#ifdef LIBUNWIND_SUPPORT
+#ifdef HAVE_LIBUNWIND_SUPPORT
 const char record_callchain_help[] = CALLCHAIN_HELP "fp dwarf";
 #else
 const char record_callchain_help[] = CALLCHAIN_HELP "fp";
@@ -875,13 +843,14 @@
 	OPT_STRING('C', "cpu", &record.opts.target.cpu_list, "cpu",
 		    "list of cpus to monitor"),
 	OPT_U64('c', "count", &record.opts.user_interval, "event period to sample"),
-	OPT_STRING('o', "output", &record.output_name, "file",
+	OPT_STRING('o', "output", &record.file.path, "file",
 		    "output file name"),
 	OPT_BOOLEAN('i', "no-inherit", &record.opts.no_inherit,
 		    "child tasks do not inherit counters"),
 	OPT_UINTEGER('F', "freq", &record.opts.user_freq, "profile at this frequency"),
-	OPT_UINTEGER('m', "mmap-pages", &record.opts.mmap_pages,
-		     "number of mmap data pages"),
+	OPT_CALLBACK('m', "mmap-pages", &record.opts.mmap_pages, "pages",
+		     "number of mmap data pages",
+		     perf_evlist__parse_mmap_pages),
 	OPT_BOOLEAN(0, "group", &record.opts.group,
 		    "put the counters into a counter group"),
 	OPT_CALLBACK_NOOPT('g', NULL, &record.opts,
@@ -920,6 +889,8 @@
 		     parse_branch_stack),
 	OPT_BOOLEAN('W', "weight", &record.opts.sample_weight,
 		    "sample by weight (on special events only)"),
+	OPT_BOOLEAN(0, "transaction", &record.opts.sample_transaction,
+		    "sample transaction flags (special events only)"),
 	OPT_END()
 };
 
@@ -989,20 +960,7 @@
 	if (perf_evlist__create_maps(evsel_list, &rec->opts.target) < 0)
 		usage_with_options(record_usage, record_options);
 
-	if (rec->opts.user_interval != ULLONG_MAX)
-		rec->opts.default_interval = rec->opts.user_interval;
-	if (rec->opts.user_freq != UINT_MAX)
-		rec->opts.freq = rec->opts.user_freq;
-
-	/*
-	 * User specified count overrides default frequency.
-	 */
-	if (rec->opts.default_interval)
-		rec->opts.freq = 0;
-	else if (rec->opts.freq) {
-		rec->opts.default_interval = rec->opts.freq;
-	} else {
-		ui__error("frequency and count are zero, aborting\n");
+	if (perf_record_opts__config(&rec->opts)) {
 		err = -EINVAL;
 		goto out_free_fd;
 	}
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 72eae74..8cf8e66 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -33,8 +33,10 @@
 #include "util/thread.h"
 #include "util/sort.h"
 #include "util/hist.h"
+#include "util/data.h"
 #include "arch/common.h"
 
+#include <dlfcn.h>
 #include <linux/bitmap.h>
 
 struct perf_report {
@@ -47,6 +49,7 @@
 	bool			show_threads;
 	bool			inverted_callchain;
 	bool			mem_mode;
+	int			max_stack;
 	struct perf_read_values	show_threads_values;
 	const char		*pretty_printing_style;
 	const char		*cpu_list;
@@ -88,7 +91,8 @@
 	if ((sort__has_parent || symbol_conf.use_callchain) &&
 	    sample->callchain) {
 		err = machine__resolve_callchain(machine, evsel, al->thread,
-						 sample, &parent, al);
+						 sample, &parent, al,
+						 rep->max_stack);
 		if (err)
 			return err;
 	}
@@ -111,7 +115,8 @@
 	 * and this is indirectly achieved by passing period=weight here
 	 * and the he_stat__add_period() function.
 	 */
-	he = __hists__add_mem_entry(&evsel->hists, al, parent, mi, cost, cost);
+	he = __hists__add_entry(&evsel->hists, al, parent, NULL, mi,
+				cost, cost, 0);
 	if (!he)
 		return -ENOMEM;
 
@@ -179,7 +184,8 @@
 	if ((sort__has_parent || symbol_conf.use_callchain)
 	    && sample->callchain) {
 		err = machine__resolve_callchain(machine, evsel, al->thread,
-						 sample, &parent, al);
+						 sample, &parent, al,
+						 rep->max_stack);
 		if (err)
 			return err;
 	}
@@ -195,12 +201,16 @@
 
 		err = -ENOMEM;
 
+		/* overwrite the 'al' to branch-to info */
+		al->map = bi[i].to.map;
+		al->sym = bi[i].to.sym;
+		al->addr = bi[i].to.addr;
 		/*
 		 * The report shows the percentage of total branches captured
 		 * and not events sampled. Thus we use a pseudo period of 1.
 		 */
-		he = __hists__add_branch_entry(&evsel->hists, al, parent,
-				&bi[i], 1, 1);
+		he = __hists__add_entry(&evsel->hists, al, parent, &bi[i], NULL,
+					1, 1, 0);
 		if (he) {
 			struct annotation *notes;
 			bx = he->branch_info;
@@ -242,24 +252,28 @@
 	return err;
 }
 
-static int perf_evsel__add_hist_entry(struct perf_evsel *evsel,
+static int perf_evsel__add_hist_entry(struct perf_tool *tool,
+				      struct perf_evsel *evsel,
 				      struct addr_location *al,
 				      struct perf_sample *sample,
 				      struct machine *machine)
 {
+	struct perf_report *rep = container_of(tool, struct perf_report, tool);
 	struct symbol *parent = NULL;
 	int err = 0;
 	struct hist_entry *he;
 
 	if ((sort__has_parent || symbol_conf.use_callchain) && sample->callchain) {
 		err = machine__resolve_callchain(machine, evsel, al->thread,
-						 sample, &parent, al);
+						 sample, &parent, al,
+						 rep->max_stack);
 		if (err)
 			return err;
 	}
 
-	he = __hists__add_entry(&evsel->hists, al, parent, sample->period,
-					sample->weight);
+	he = __hists__add_entry(&evsel->hists, al, parent, NULL, NULL,
+				sample->period, sample->weight,
+				sample->transaction);
 	if (he == NULL)
 		return -ENOMEM;
 
@@ -330,7 +344,8 @@
 		if (al.map != NULL)
 			al.map->dso->hit = 1;
 
-		ret = perf_evsel__add_hist_entry(evsel, &al, sample, machine);
+		ret = perf_evsel__add_hist_entry(tool, evsel, &al, sample,
+						 machine);
 		if (ret < 0)
 			pr_debug("problem incrementing symbol period, skipping event\n");
 	}
@@ -364,10 +379,11 @@
 /* For pipe mode, sample_type is not currently set */
 static int perf_report__setup_sample_type(struct perf_report *rep)
 {
-	struct perf_session *self = rep->session;
-	u64 sample_type = perf_evlist__combined_sample_type(self->evlist);
+	struct perf_session *session = rep->session;
+	u64 sample_type = perf_evlist__combined_sample_type(session->evlist);
+	bool is_pipe = perf_data_file__is_pipe(session->file);
 
-	if (!self->fd_pipe && !(sample_type & PERF_SAMPLE_CALLCHAIN)) {
+	if (!is_pipe && !(sample_type & PERF_SAMPLE_CALLCHAIN)) {
 		if (sort__has_parent) {
 			ui__error("Selected --sort parent, but no "
 				    "callchain data. Did you call "
@@ -390,7 +406,7 @@
 	}
 
 	if (sort__mode == SORT_MODE__BRANCH) {
-		if (!self->fd_pipe &&
+		if (!is_pipe &&
 		    !(sample_type & PERF_SAMPLE_BRANCH_STACK)) {
 			ui__error("Selected -b but no branch data. "
 				  "Did you call perf record without -b?\n");
@@ -407,14 +423,14 @@
 }
 
 static size_t hists__fprintf_nr_sample_events(struct perf_report *rep,
-					      struct hists *self,
+					      struct hists *hists,
 					      const char *evname, FILE *fp)
 {
 	size_t ret;
 	char unit;
-	unsigned long nr_samples = self->stats.nr_events[PERF_RECORD_SAMPLE];
-	u64 nr_events = self->stats.total_period;
-	struct perf_evsel *evsel = hists_to_evsel(self);
+	unsigned long nr_samples = hists->stats.nr_events[PERF_RECORD_SAMPLE];
+	u64 nr_events = hists->stats.total_period;
+	struct perf_evsel *evsel = hists_to_evsel(hists);
 	char buf[512];
 	size_t size = sizeof(buf);
 
@@ -486,6 +502,8 @@
 	struct map *kernel_map;
 	struct kmap *kernel_kmap;
 	const char *help = "For a higher level overview, try: perf report --sort comm,dso";
+	struct ui_progress prog;
+	struct perf_data_file *file = session->file;
 
 	signal(SIGINT, sig_handler);
 
@@ -547,13 +565,19 @@
 	}
 
 	nr_samples = 0;
+	list_for_each_entry(pos, &session->evlist->entries, node)
+		nr_samples += pos->hists.nr_entries;
+
+	ui_progress__init(&prog, nr_samples, "Merging related events...");
+
+	nr_samples = 0;
 	list_for_each_entry(pos, &session->evlist->entries, node) {
 		struct hists *hists = &pos->hists;
 
 		if (pos->idx == 0)
 			hists->symbol_filter_str = rep->symbol_filter_str;
 
-		hists__collapse_resort(hists);
+		hists__collapse_resort(hists, &prog);
 		nr_samples += hists->stats.nr_events[PERF_RECORD_SAMPLE];
 
 		/* Non-group events are considered as leader */
@@ -565,12 +589,13 @@
 			hists__link(leader_hists, hists);
 		}
 	}
+	ui_progress__finish();
 
 	if (session_done())
 		return 0;
 
 	if (nr_samples == 0) {
-		ui__error("The %s file has no samples!\n", session->filename);
+		ui__error("The %s file has no samples!\n", file->path);
 		return 0;
 	}
 
@@ -591,8 +616,19 @@
 				ret = 0;
 
 		} else if (use_browser == 2) {
-			perf_evlist__gtk_browse_hists(session->evlist, help,
-						      NULL, rep->min_percent);
+			int (*hist_browser)(struct perf_evlist *,
+					    const char *,
+					    struct hist_browser_timer *,
+					    float min_pcnt);
+
+			hist_browser = dlsym(perf_gtk_handle,
+					     "perf_evlist__gtk_browse_hists");
+			if (hist_browser == NULL) {
+				ui__error("GTK browser not found!\n");
+				return ret;
+			}
+			hist_browser(session->evlist, help, NULL,
+				     rep->min_percent);
 		}
 	} else
 		perf_evlist__tty_browse_hists(session->evlist, rep, help);
@@ -757,6 +793,7 @@
 			.ordered_samples = true,
 			.ordering_requires_timestamps = true,
 		},
+		.max_stack		 = PERF_MAX_STACK_DEPTH,
 		.pretty_printing_style	 = "normal",
 	};
 	const struct option options[] = {
@@ -787,7 +824,7 @@
 		   "sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline,"
 		   " dso_to, dso_from, symbol_to, symbol_from, mispredict,"
 		   " weight, local_weight, mem, symbol_daddr, dso_daddr, tlb, "
-		   "snoop, locked"),
+		   "snoop, locked, abort, in_tx, transaction"),
 	OPT_BOOLEAN(0, "showcpuutilization", &symbol_conf.show_cpu_utilization,
 		    "Show sample percentage for different cpu modes"),
 	OPT_STRING('p', "parent", &parent_pattern, "regex",
@@ -797,6 +834,10 @@
 	OPT_CALLBACK_DEFAULT('g', "call-graph", &report, "output_type,min_percent[,print_limit],call_order",
 		     "Display callchains using output_type (graph, flat, fractal, or none) , min percent threshold, optional print limit, callchain order, key (function or address). "
 		     "Default: fractal,0.5,callee,function", &parse_callchain_opt, callchain_default_opt),
+	OPT_INTEGER(0, "max-stack", &report.max_stack,
+		    "Set the maximum stack depth when parsing the callchain, "
+		    "anything beyond the specified depth will be ignored. "
+		    "Default: " __stringify(PERF_MAX_STACK_DEPTH)),
 	OPT_BOOLEAN('G', "inverted", &report.inverted_callchain,
 		    "alias for inverted call graph"),
 	OPT_CALLBACK(0, "ignore-callees", NULL, "regex",
@@ -845,6 +886,9 @@
 		     "Don't show entries under that percent", parse_percent_limit),
 	OPT_END()
 	};
+	struct perf_data_file file = {
+		.mode  = PERF_DATA_MODE_READ,
+	};
 
 	perf_config(perf_report_config, &report);
 
@@ -867,16 +911,11 @@
 			input_name = "perf.data";
 	}
 
-	if (strcmp(input_name, "-") != 0)
-		setup_browser(true);
-	else {
-		use_browser = 0;
-		perf_hpp__init();
-	}
+	file.path  = input_name;
+	file.force = report.force;
 
 repeat:
-	session = perf_session__new(input_name, O_RDONLY,
-				    report.force, false, &report.tool);
+	session = perf_session__new(&file, false, &report.tool);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -914,8 +953,22 @@
 			sort_order = "local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked";
 	}
 
-	if (setup_sorting() < 0)
-		usage_with_options(report_usage, options);
+	if (setup_sorting() < 0) {
+		parse_options_usage(report_usage, options, "s", 1);
+		goto error;
+	}
+
+	if (parent_pattern != default_parent_pattern) {
+		if (sort_dimension__add("parent") < 0)
+			goto error;
+	}
+
+	if (strcmp(input_name, "-") != 0)
+		setup_browser(true);
+	else {
+		use_browser = 0;
+		perf_hpp__init();
+	}
 
 	/*
 	 * Only in the TUI browser we are doing integrated annotation,
@@ -946,11 +999,6 @@
 	if (symbol__init() < 0)
 		goto error;
 
-	if (parent_pattern != default_parent_pattern) {
-		if (sort_dimension__add("parent") < 0)
-			goto error;
-	}
-
 	if (argc) {
 		/*
 		 * Special case: if there's an argument left then assume that
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index d8c51b2..0f3c6551 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -737,12 +737,12 @@
 
 	if (verbose) {
 		printf("fork event\n");
-		printf("... parent: %s/%d\n", parent->comm, parent->tid);
-		printf("...  child: %s/%d\n", child->comm, child->tid);
+		printf("... parent: %s/%d\n", thread__comm_str(parent), parent->tid);
+		printf("...  child: %s/%d\n", thread__comm_str(child), child->tid);
 	}
 
-	register_pid(sched, parent->tid, parent->comm);
-	register_pid(sched, child->tid, child->comm);
+	register_pid(sched, parent->tid, thread__comm_str(parent));
+	register_pid(sched, child->tid, thread__comm_str(child));
 	return 0;
 }
 
@@ -1077,7 +1077,7 @@
 	if (!atoms) {
 		if (thread_atoms_insert(sched, migrant))
 			return -1;
-		register_pid(sched, migrant->tid, migrant->comm);
+		register_pid(sched, migrant->tid, thread__comm_str(migrant));
 		atoms = thread_atoms_search(&sched->atom_root, migrant, &sched->cmp_pid);
 		if (!atoms) {
 			pr_err("migration-event: Internal tree error");
@@ -1111,13 +1111,13 @@
 	/*
 	 * Ignore idle threads:
 	 */
-	if (!strcmp(work_list->thread->comm, "swapper"))
+	if (!strcmp(thread__comm_str(work_list->thread), "swapper"))
 		return;
 
 	sched->all_runtime += work_list->total_runtime;
 	sched->all_count   += work_list->nb_atoms;
 
-	ret = printf("  %s:%d ", work_list->thread->comm, work_list->thread->tid);
+	ret = printf("  %s:%d ", thread__comm_str(work_list->thread), work_list->thread->tid);
 
 	for (i = 0; i < 24 - ret; i++)
 		printf(" ");
@@ -1334,7 +1334,7 @@
 	printf("  %12.6f secs ", (double)timestamp/1e9);
 	if (new_shortname) {
 		printf("%s => %s:%d\n",
-			sched_in->shortname, sched_in->comm, sched_in->tid);
+		       sched_in->shortname, thread__comm_str(sched_in), sched_in->tid);
 	} else {
 		printf("\n");
 	}
@@ -1427,8 +1427,8 @@
 	evsel->hists.stats.total_period += sample->period;
 	hists__inc_nr_events(&evsel->hists, PERF_RECORD_SAMPLE);
 
-	if (evsel->handler.func != NULL) {
-		tracepoint_handler f = evsel->handler.func;
+	if (evsel->handler != NULL) {
+		tracepoint_handler f = evsel->handler;
 		err = f(tool, evsel, sample, machine);
 	}
 
@@ -1446,8 +1446,12 @@
 		{ "sched:sched_migrate_task", process_sched_migrate_task_event, },
 	};
 	struct perf_session *session;
+	struct perf_data_file file = {
+		.path = input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
 
-	session = perf_session__new(input_name, O_RDONLY, 0, false, &sched->tool);
+	session = perf_session__new(&file, false, &sched->tool);
 	if (session == NULL) {
 		pr_debug("No Memory for session\n");
 		return -1;
@@ -1651,29 +1655,27 @@
 	return cmd_record(i, rec_argv, NULL);
 }
 
-static const char default_sort_order[] = "avg, max, switch, runtime";
-static struct perf_sched sched = {
-	.tool = {
-		.sample		 = perf_sched__process_tracepoint_sample,
-		.comm		 = perf_event__process_comm,
-		.lost		 = perf_event__process_lost,
-		.fork		 = perf_sched__process_fork_event,
-		.ordered_samples = true,
-	},
-	.cmp_pid	      = LIST_HEAD_INIT(sched.cmp_pid),
-	.sort_list	      = LIST_HEAD_INIT(sched.sort_list),
-	.start_work_mutex     = PTHREAD_MUTEX_INITIALIZER,
-	.work_done_wait_mutex = PTHREAD_MUTEX_INITIALIZER,
-	.curr_pid	      = { [0 ... MAX_CPUS - 1] = -1 },
-	.sort_order	      = default_sort_order,
-	.replay_repeat	      = 10,
-	.profile_cpu	      = -1,
-	.next_shortname1      = 'A',
-	.next_shortname2      = '0',
-};
-
 int cmd_sched(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	const char default_sort_order[] = "avg, max, switch, runtime";
+	struct perf_sched sched = {
+		.tool = {
+			.sample		 = perf_sched__process_tracepoint_sample,
+			.comm		 = perf_event__process_comm,
+			.lost		 = perf_event__process_lost,
+			.fork		 = perf_sched__process_fork_event,
+			.ordered_samples = true,
+		},
+		.cmp_pid	      = LIST_HEAD_INIT(sched.cmp_pid),
+		.sort_list	      = LIST_HEAD_INIT(sched.sort_list),
+		.start_work_mutex     = PTHREAD_MUTEX_INITIALIZER,
+		.work_done_wait_mutex = PTHREAD_MUTEX_INITIALIZER,
+		.sort_order	      = default_sort_order,
+		.replay_repeat	      = 10,
+		.profile_cpu	      = -1,
+		.next_shortname1      = 'A',
+		.next_shortname2      = '0',
+	};
 	const struct option latency_options[] = {
 	OPT_STRING('s', "sort", &sched.sort_order, "key[,key2...]",
 		   "sort by key(s): runtime, switch, avg, max"),
@@ -1729,6 +1731,10 @@
 		.switch_event	    = replay_switch_event,
 		.fork_event	    = replay_fork_event,
 	};
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(sched.curr_pid); i++)
+		sched.curr_pid[i] = -1;
 
 	argc = parse_options(argc, argv, sched_options, sched_usage,
 			     PARSE_OPT_STOP_AT_NON_OPTION);
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 9c333ff..baf1798 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -15,6 +15,7 @@
 #include "util/evlist.h"
 #include "util/evsel.h"
 #include "util/sort.h"
+#include "util/data.h"
 #include <linux/bitmap.h>
 
 static char const		*script_name;
@@ -228,6 +229,24 @@
 	return 0;
 }
 
+static void set_print_ip_opts(struct perf_event_attr *attr)
+{
+	unsigned int type = attr->type;
+
+	output[type].print_ip_opts = 0;
+	if (PRINT_FIELD(IP))
+		output[type].print_ip_opts |= PRINT_IP_OPT_IP;
+
+	if (PRINT_FIELD(SYM))
+		output[type].print_ip_opts |= PRINT_IP_OPT_SYM;
+
+	if (PRINT_FIELD(DSO))
+		output[type].print_ip_opts |= PRINT_IP_OPT_DSO;
+
+	if (PRINT_FIELD(SYMOFFSET))
+		output[type].print_ip_opts |= PRINT_IP_OPT_SYMOFFSET;
+}
+
 /*
  * verify all user requested events exist and the samples
  * have the expected data
@@ -236,7 +255,6 @@
 {
 	int j;
 	struct perf_evsel *evsel;
-	struct perf_event_attr *attr;
 
 	for (j = 0; j < PERF_TYPE_MAX; ++j) {
 		evsel = perf_session__find_first_evtype(session, j);
@@ -259,20 +277,7 @@
 		if (evsel == NULL)
 			continue;
 
-		attr = &evsel->attr;
-
-		output[j].print_ip_opts = 0;
-		if (PRINT_FIELD(IP))
-			output[j].print_ip_opts |= PRINT_IP_OPT_IP;
-
-		if (PRINT_FIELD(SYM))
-			output[j].print_ip_opts |= PRINT_IP_OPT_SYM;
-
-		if (PRINT_FIELD(DSO))
-			output[j].print_ip_opts |= PRINT_IP_OPT_DSO;
-
-		if (PRINT_FIELD(SYMOFFSET))
-			output[j].print_ip_opts |= PRINT_IP_OPT_SYMOFFSET;
+		set_print_ip_opts(&evsel->attr);
 	}
 
 	return 0;
@@ -290,11 +295,11 @@
 
 	if (PRINT_FIELD(COMM)) {
 		if (latency_format)
-			printf("%8.8s ", thread->comm);
+			printf("%8.8s ", thread__comm_str(thread));
 		else if (PRINT_FIELD(IP) && symbol_conf.use_callchain)
-			printf("%s ", thread->comm);
+			printf("%s ", thread__comm_str(thread));
 		else
-			printf("%16s ", thread->comm);
+			printf("%16s ", thread__comm_str(thread));
 	}
 
 	if (PRINT_FIELD(PID) && PRINT_FIELD(TID))
@@ -409,7 +414,9 @@
 	printf(" => ");
 
 	/* print branch_to information */
-	if (PRINT_FIELD(ADDR))
+	if (PRINT_FIELD(ADDR) ||
+	    ((evsel->attr.sample_type & PERF_SAMPLE_ADDR) &&
+	     !output[attr->type].user_set))
 		print_sample_addr(event, sample, machine, thread, attr);
 
 	printf("\n");
@@ -539,32 +546,51 @@
 	return 0;
 }
 
-static struct perf_tool perf_script = {
-	.sample		 = process_sample_event,
-	.mmap		 = perf_event__process_mmap,
-	.mmap2		 = perf_event__process_mmap2,
-	.comm		 = perf_event__process_comm,
-	.exit		 = perf_event__process_exit,
-	.fork		 = perf_event__process_fork,
-	.attr		 = perf_event__process_attr,
-	.tracing_data	 = perf_event__process_tracing_data,
-	.build_id	 = perf_event__process_build_id,
-	.ordered_samples = true,
-	.ordering_requires_timestamps = true,
+struct perf_script {
+	struct perf_tool	tool;
+	struct perf_session	*session;
 };
 
+static int process_attr(struct perf_tool *tool, union perf_event *event,
+			struct perf_evlist **pevlist)
+{
+	struct perf_script *scr = container_of(tool, struct perf_script, tool);
+	struct perf_evlist *evlist;
+	struct perf_evsel *evsel, *pos;
+	int err;
+
+	err = perf_event__process_attr(tool, event, pevlist);
+	if (err)
+		return err;
+
+	evlist = *pevlist;
+	evsel = perf_evlist__last(*pevlist);
+
+	if (evsel->attr.type >= PERF_TYPE_MAX)
+		return 0;
+
+	list_for_each_entry(pos, &evlist->entries, node) {
+		if (pos->attr.type == evsel->attr.type && pos != evsel)
+			return 0;
+	}
+
+	set_print_ip_opts(&evsel->attr);
+
+	return perf_evsel__check_attr(evsel, scr->session);
+}
+
 static void sig_handler(int sig __maybe_unused)
 {
 	session_done = 1;
 }
 
-static int __cmd_script(struct perf_session *session)
+static int __cmd_script(struct perf_script *script)
 {
 	int ret;
 
 	signal(SIGINT, sig_handler);
 
-	ret = perf_session__process_events(session, &perf_script);
+	ret = perf_session__process_events(script->session, &script->tool);
 
 	if (debug_mode)
 		pr_err("Misordered timestamps: %" PRIu64 "\n", nr_unordered);
@@ -1113,10 +1139,14 @@
 	char scripts_path[MAXPATHLEN], lang_path[MAXPATHLEN];
 	DIR *scripts_dir, *lang_dir;
 	struct perf_session *session;
+	struct perf_data_file file = {
+		.path = input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
 	char *temp;
 	int i = 0;
 
-	session = perf_session__new(input_name, O_RDONLY, 0, false, NULL);
+	session = perf_session__new(&file, false, NULL);
 	if (!session)
 		return -1;
 
@@ -1266,6 +1296,21 @@
 	char *script_path = NULL;
 	const char **__argv;
 	int i, j, err;
+	struct perf_script script = {
+		.tool = {
+			.sample		 = process_sample_event,
+			.mmap		 = perf_event__process_mmap,
+			.mmap2		 = perf_event__process_mmap2,
+			.comm		 = perf_event__process_comm,
+			.exit		 = perf_event__process_exit,
+			.fork		 = perf_event__process_fork,
+			.attr		 = process_attr,
+			.tracing_data	 = perf_event__process_tracing_data,
+			.build_id	 = perf_event__process_build_id,
+			.ordered_samples = true,
+			.ordering_requires_timestamps = true,
+		},
+	};
 	const struct option options[] = {
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
@@ -1317,12 +1362,17 @@
 		"perf script [<options>] <top-script> [script-args]",
 		NULL
 	};
+	struct perf_data_file file = {
+		.mode = PERF_DATA_MODE_READ,
+	};
 
 	setup_scripting();
 
 	argc = parse_options(argc, argv, options, script_usage,
 			     PARSE_OPT_STOP_AT_NON_OPTION);
 
+	file.path = input_name;
+
 	if (argc > 1 && !strncmp(argv[0], "rec", strlen("rec"))) {
 		rec_script_path = get_script_path(argv[1], RECORD_SUFFIX);
 		if (!rec_script_path)
@@ -1486,11 +1536,12 @@
 	if (!script_name)
 		setup_pager();
 
-	session = perf_session__new(input_name, O_RDONLY, 0, false,
-				    &perf_script);
+	session = perf_session__new(&file, false, &script.tool);
 	if (session == NULL)
 		return -ENOMEM;
 
+	script.session = session;
+
 	if (cpu_list) {
 		if (perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap))
 			return -1;
@@ -1514,7 +1565,7 @@
 			return -1;
 		}
 
-		input = open(session->filename, O_RDONLY);	/* input_name */
+		input = open(file.path, O_RDONLY);	/* input_name */
 		if (input < 0) {
 			perror("failed to open file");
 			return -1;
@@ -1554,7 +1605,7 @@
 	if (err < 0)
 		goto out;
 
-	err = __cmd_script(session);
+	err = __cmd_script(&script);
 
 	perf_session__delete(session);
 	cleanup_scripting();
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 5098f14..0fc1c94 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -46,6 +46,7 @@
 #include "util/util.h"
 #include "util/parse-options.h"
 #include "util/parse-events.h"
+#include "util/pmu.h"
 #include "util/event.h"
 #include "util/evlist.h"
 #include "util/evsel.h"
@@ -70,6 +71,41 @@
 static void print_counter(struct perf_evsel *counter, char *prefix);
 static void print_aggr(char *prefix);
 
+/* Default events used for perf stat -T */
+static const char * const transaction_attrs[] = {
+	"task-clock",
+	"{"
+	"instructions,"
+	"cycles,"
+	"cpu/cycles-t/,"
+	"cpu/tx-start/,"
+	"cpu/el-start/,"
+	"cpu/cycles-ct/"
+	"}"
+};
+
+/* More limited version when the CPU does not have all events. */
+static const char * const transaction_limited_attrs[] = {
+	"task-clock",
+	"{"
+	"instructions,"
+	"cycles,"
+	"cpu/cycles-t/,"
+	"cpu/tx-start/"
+	"}"
+};
+
+/* must match transaction_attrs and the beginning limited_attrs */
+enum {
+	T_TASK_CLOCK,
+	T_INSTRUCTIONS,
+	T_CYCLES,
+	T_CYCLES_IN_TX,
+	T_TRANSACTION_START,
+	T_ELISION_START,
+	T_CYCLES_IN_TX_CP,
+};
+
 static struct perf_evlist	*evsel_list;
 
 static struct perf_target	target = {
@@ -90,6 +126,7 @@
 static volatile pid_t		child_pid			= -1;
 static bool			null_run			=  false;
 static int			detailed_run			=  0;
+static bool			transaction_run;
 static bool			big_num				=  true;
 static int			big_num_opt			=  -1;
 static const char		*csv_sep			= NULL;
@@ -214,7 +251,10 @@
 static struct stats runtime_ll_cache_stats[MAX_NR_CPUS];
 static struct stats runtime_itlb_cache_stats[MAX_NR_CPUS];
 static struct stats runtime_dtlb_cache_stats[MAX_NR_CPUS];
+static struct stats runtime_cycles_in_tx_stats[MAX_NR_CPUS];
 static struct stats walltime_nsecs_stats;
+static struct stats runtime_transaction_stats[MAX_NR_CPUS];
+static struct stats runtime_elision_stats[MAX_NR_CPUS];
 
 static void perf_stat__reset_stats(struct perf_evlist *evlist)
 {
@@ -236,6 +276,11 @@
 	memset(runtime_ll_cache_stats, 0, sizeof(runtime_ll_cache_stats));
 	memset(runtime_itlb_cache_stats, 0, sizeof(runtime_itlb_cache_stats));
 	memset(runtime_dtlb_cache_stats, 0, sizeof(runtime_dtlb_cache_stats));
+	memset(runtime_cycles_in_tx_stats, 0,
+			sizeof(runtime_cycles_in_tx_stats));
+	memset(runtime_transaction_stats, 0,
+		sizeof(runtime_transaction_stats));
+	memset(runtime_elision_stats, 0, sizeof(runtime_elision_stats));
 	memset(&walltime_nsecs_stats, 0, sizeof(walltime_nsecs_stats));
 }
 
@@ -274,6 +319,29 @@
 	return 0;
 }
 
+static struct perf_evsel *nth_evsel(int n)
+{
+	static struct perf_evsel **array;
+	static int array_len;
+	struct perf_evsel *ev;
+	int j;
+
+	/* Assumes this only called when evsel_list does not change anymore. */
+	if (!array) {
+		list_for_each_entry(ev, &evsel_list->entries, node)
+			array_len++;
+		array = malloc(array_len * sizeof(void *));
+		if (!array)
+			exit(ENOMEM);
+		j = 0;
+		list_for_each_entry(ev, &evsel_list->entries, node)
+			array[j++] = ev;
+	}
+	if (n < array_len)
+		return array[n];
+	return NULL;
+}
+
 /*
  * Update various tracking values we maintain to print
  * more semantic information such as miss/hit ratios,
@@ -285,6 +353,15 @@
 		update_stats(&runtime_nsecs_stats[0], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
 		update_stats(&runtime_cycles_stats[0], count[0]);
+	else if (transaction_run &&
+		 perf_evsel__cmp(counter, nth_evsel(T_CYCLES_IN_TX)))
+		update_stats(&runtime_cycles_in_tx_stats[0], count[0]);
+	else if (transaction_run &&
+		 perf_evsel__cmp(counter, nth_evsel(T_TRANSACTION_START)))
+		update_stats(&runtime_transaction_stats[0], count[0]);
+	else if (transaction_run &&
+		 perf_evsel__cmp(counter, nth_evsel(T_ELISION_START)))
+		update_stats(&runtime_elision_stats[0], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_FRONTEND))
 		update_stats(&runtime_stalled_cycles_front_stats[0], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_BACKEND))
@@ -629,10 +706,13 @@
 {
 	double msecs = avg / 1e6;
 	const char *fmt = csv_output ? "%.6f%s%s" : "%18.6f%s%-25s";
+	char name[25];
 
 	aggr_printout(evsel, cpu, nr);
 
-	fprintf(output, fmt, msecs, csv_sep, perf_evsel__name(evsel));
+	scnprintf(name, sizeof(name), "%s%s",
+		  perf_evsel__name(evsel), csv_output ? "" : " (msec)");
+	fprintf(output, fmt, msecs, csv_sep, name);
 
 	if (evsel->cgrp)
 		fprintf(output, "%s%s", csv_sep, evsel->cgrp->name);
@@ -828,7 +908,7 @@
 
 static void abs_printout(int cpu, int nr, struct perf_evsel *evsel, double avg)
 {
-	double total, ratio = 0.0;
+	double total, ratio = 0.0, total2;
 	const char *fmt;
 
 	if (csv_output)
@@ -853,11 +933,10 @@
 
 	if (perf_evsel__match(evsel, HARDWARE, HW_INSTRUCTIONS)) {
 		total = avg_stats(&runtime_cycles_stats[cpu]);
-		if (total)
+		if (total) {
 			ratio = avg / total;
-
-		fprintf(output, " #   %5.2f  insns per cycle        ", ratio);
-
+			fprintf(output, " #   %5.2f  insns per cycle        ", ratio);
+		}
 		total = avg_stats(&runtime_stalled_cycles_front_stats[cpu]);
 		total = max(total, avg_stats(&runtime_stalled_cycles_back_stats[cpu]));
 
@@ -920,10 +999,47 @@
 	} else if (perf_evsel__match(evsel, HARDWARE, HW_CPU_CYCLES)) {
 		total = avg_stats(&runtime_nsecs_stats[cpu]);
 
+		if (total) {
+			ratio = avg / total;
+			fprintf(output, " # %8.3f GHz                    ", ratio);
+		}
+	} else if (transaction_run &&
+		   perf_evsel__cmp(evsel, nth_evsel(T_CYCLES_IN_TX))) {
+		total = avg_stats(&runtime_cycles_stats[cpu]);
 		if (total)
-			ratio = 1.0 * avg / total;
+			fprintf(output,
+				" #   %5.2f%% transactional cycles   ",
+				100.0 * (avg / total));
+	} else if (transaction_run &&
+		   perf_evsel__cmp(evsel, nth_evsel(T_CYCLES_IN_TX_CP))) {
+		total = avg_stats(&runtime_cycles_stats[cpu]);
+		total2 = avg_stats(&runtime_cycles_in_tx_stats[cpu]);
+		if (total2 < avg)
+			total2 = avg;
+		if (total)
+			fprintf(output,
+				" #   %5.2f%% aborted cycles         ",
+				100.0 * ((total2-avg) / total));
+	} else if (transaction_run &&
+		   perf_evsel__cmp(evsel, nth_evsel(T_TRANSACTION_START)) &&
+		   avg > 0 &&
+		   runtime_cycles_in_tx_stats[cpu].n != 0) {
+		total = avg_stats(&runtime_cycles_in_tx_stats[cpu]);
 
-		fprintf(output, " # %8.3f GHz                    ", ratio);
+		if (total)
+			ratio = total / avg;
+
+		fprintf(output, " # %8.0f cycles / transaction   ", ratio);
+	} else if (transaction_run &&
+		   perf_evsel__cmp(evsel, nth_evsel(T_ELISION_START)) &&
+		   avg > 0 &&
+		   runtime_cycles_in_tx_stats[cpu].n != 0) {
+		total = avg_stats(&runtime_cycles_in_tx_stats[cpu]);
+
+		if (total)
+			ratio = total / avg;
+
+		fprintf(output, " # %8.0f cycles / elision       ", ratio);
 	} else if (runtime_nsecs_stats[cpu].n != 0) {
 		char unit = 'M';
 
@@ -1116,7 +1232,11 @@
 	if (!csv_output) {
 		fprintf(output, "\n");
 		fprintf(output, " Performance counter stats for ");
-		if (!perf_target__has_task(&target)) {
+		if (target.system_wide)
+			fprintf(output, "\'system wide");
+		else if (target.cpu_list)
+			fprintf(output, "\'CPU(s) %s", target.cpu_list);
+		else if (!perf_target__has_task(&target)) {
 			fprintf(output, "\'%s", argv[0]);
 			for (i = 1; i < argc; i++)
 				fprintf(output, " %s", argv[i]);
@@ -1237,6 +1357,16 @@
 	return 0;
 }
 
+static int setup_events(const char * const *attrs, unsigned len)
+{
+	unsigned i;
+
+	for (i = 0; i < len; i++) {
+		if (parse_events(evsel_list, attrs[i]))
+			return -1;
+	}
+	return 0;
+}
 
 /*
  * Add default attributes, if there were no attributes specified or
@@ -1355,6 +1485,22 @@
 	if (null_run)
 		return 0;
 
+	if (transaction_run) {
+		int err;
+		if (pmu_have_event("cpu", "cycles-ct") &&
+		    pmu_have_event("cpu", "el-start"))
+			err = setup_events(transaction_attrs,
+					ARRAY_SIZE(transaction_attrs));
+		else
+			err = setup_events(transaction_limited_attrs,
+				 ARRAY_SIZE(transaction_limited_attrs));
+		if (err < 0) {
+			fprintf(stderr, "Cannot set up transaction events\n");
+			return -1;
+		}
+		return 0;
+	}
+
 	if (!evsel_list->nr_entries) {
 		if (perf_evlist__add_default_attrs(evsel_list, default_attrs) < 0)
 			return -1;
@@ -1389,6 +1535,8 @@
 	int output_fd = 0;
 	const char *output_name	= NULL;
 	const struct option options[] = {
+	OPT_BOOLEAN('T', "transaction", &transaction_run,
+		    "hardware transaction statistics"),
 	OPT_CALLBACK('e', "event", &evsel_list, "event",
 		     "event selector. use 'perf list' to list available events",
 		     parse_events_option),
@@ -1448,7 +1596,7 @@
 		"perf stat [<options>] [<command>]",
 		NULL
 	};
-	int status = -ENOMEM, run_idx;
+	int status = -EINVAL, run_idx;
 	const char *mode;
 
 	setlocale(LC_ALL, "");
@@ -1466,12 +1614,15 @@
 
 	if (output_name && output_fd) {
 		fprintf(stderr, "cannot use both --output and --log-fd\n");
-		usage_with_options(stat_usage, options);
+		parse_options_usage(stat_usage, options, "o", 1);
+		parse_options_usage(NULL, options, "log-fd", 0);
+		goto out;
 	}
 
 	if (output_fd < 0) {
 		fprintf(stderr, "argument to --log-fd must be a > 0\n");
-		usage_with_options(stat_usage, options);
+		parse_options_usage(stat_usage, options, "log-fd", 0);
+		goto out;
 	}
 
 	if (!output) {
@@ -1508,16 +1659,21 @@
 		/* User explicitly passed -B? */
 		if (big_num_opt == 1) {
 			fprintf(stderr, "-B option not supported with -x\n");
-			usage_with_options(stat_usage, options);
+			parse_options_usage(stat_usage, options, "B", 1);
+			parse_options_usage(NULL, options, "x", 1);
+			goto out;
 		} else /* Nope, so disable big number formatting */
 			big_num = false;
 	} else if (big_num_opt == 0) /* User passed --no-big-num */
 		big_num = false;
 
-	if (!argc && !perf_target__has_task(&target))
+	if (!argc && perf_target__none(&target))
 		usage_with_options(stat_usage, options);
+
 	if (run_count < 0) {
-		usage_with_options(stat_usage, options);
+		pr_err("Run count must be a positive number\n");
+		parse_options_usage(stat_usage, options, "r", 1);
+		goto out;
 	} else if (run_count == 0) {
 		forever = true;
 		run_count = 1;
@@ -1529,8 +1685,10 @@
 		fprintf(stderr, "both cgroup and no-aggregation "
 			"modes only available in system-wide mode\n");
 
-		usage_with_options(stat_usage, options);
-		return -1;
+		parse_options_usage(stat_usage, options, "G", 1);
+		parse_options_usage(NULL, options, "A", 1);
+		parse_options_usage(NULL, options, "a", 1);
+		goto out;
 	}
 
 	if (add_default_attributes())
@@ -1539,25 +1697,28 @@
 	perf_target__validate(&target);
 
 	if (perf_evlist__create_maps(evsel_list, &target) < 0) {
-		if (perf_target__has_task(&target))
+		if (perf_target__has_task(&target)) {
 			pr_err("Problems finding threads of monitor\n");
-		if (perf_target__has_cpu(&target))
+			parse_options_usage(stat_usage, options, "p", 1);
+			parse_options_usage(NULL, options, "t", 1);
+		} else if (perf_target__has_cpu(&target)) {
 			perror("failed to parse CPUs map");
-
-		usage_with_options(stat_usage, options);
-		return -1;
+			parse_options_usage(stat_usage, options, "C", 1);
+			parse_options_usage(NULL, options, "a", 1);
+		}
+		goto out;
 	}
 	if (interval && interval < 100) {
 		pr_err("print interval must be >= 100ms\n");
-		usage_with_options(stat_usage, options);
-		return -1;
+		parse_options_usage(stat_usage, options, "I", 1);
+		goto out_free_maps;
 	}
 
 	if (perf_evlist__alloc_stats(evsel_list, interval))
 		goto out_free_maps;
 
 	if (perf_stat_init_aggr_mode())
-		goto out;
+		goto out_free_maps;
 
 	/*
 	 * We dont want to block the signals - that would cause
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index c2e0231..41c9bde2 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -36,6 +36,7 @@
 #include "util/session.h"
 #include "util/svghelper.h"
 #include "util/tool.h"
+#include "util/data.h"
 
 #define SUPPORT_OLD_POWER_EVENTS 1
 #define PWR_EVENT_EXIT -1
@@ -482,8 +483,8 @@
 	if (sample->cpu > numcpus)
 		numcpus = sample->cpu;
 
-	if (evsel->handler.func != NULL) {
-		tracepoint_handler f = evsel->handler.func;
+	if (evsel->handler != NULL) {
+		tracepoint_handler f = evsel->handler;
 		return f(evsel, sample);
 	}
 
@@ -990,8 +991,13 @@
 		{ "power:power_frequency",	process_sample_power_frequency },
 #endif
 	};
-	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
-							 0, false, &perf_timechart);
+	struct perf_data_file file = {
+		.path = input_name,
+		.mode = PERF_DATA_MODE_READ,
+	};
+
+	struct perf_session *session = perf_session__new(&file, false,
+							 &perf_timechart);
 	int ret = -EINVAL;
 
 	if (session == NULL)
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 5a11f13..9acca88 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -246,10 +246,10 @@
 	struct hist_entry *he;
 
 	pthread_mutex_lock(&evsel->hists.lock);
-	he = __hists__add_entry(&evsel->hists, al, NULL, sample->period,
-				sample->weight);
+	he = __hists__add_entry(&evsel->hists, al, NULL, NULL, NULL,
+				sample->period, sample->weight,
+				sample->transaction);
 	pthread_mutex_unlock(&evsel->hists.lock);
-
 	if (he == NULL)
 		return NULL;
 
@@ -287,7 +287,7 @@
 		return;
 	}
 
-	hists__collapse_resort(&top->sym_evsel->hists);
+	hists__collapse_resort(&top->sym_evsel->hists, NULL);
 	hists__output_resort(&top->sym_evsel->hists);
 	hists__decay_entries(&top->sym_evsel->hists,
 			     top->hide_user_symbols,
@@ -553,7 +553,7 @@
 	if (t->evlist->selected != NULL)
 		t->sym_evsel = t->evlist->selected;
 
-	hists__collapse_resort(&t->sym_evsel->hists);
+	hists__collapse_resort(&t->sym_evsel->hists, NULL);
 	hists__output_resort(&t->sym_evsel->hists);
 	hists__decay_entries(&t->sym_evsel->hists,
 			     t->hide_user_symbols,
@@ -771,7 +771,8 @@
 		    sample->callchain) {
 			err = machine__resolve_callchain(machine, evsel,
 							 al.thread, sample,
-							 &parent, &al);
+							 &parent, &al,
+							 top->max_stack);
 			if (err)
 				return;
 		}
@@ -856,7 +857,7 @@
 						   &sample, machine);
 		} else if (event->header.type < PERF_RECORD_MAX) {
 			hists__inc_nr_events(&evsel->hists, event->header.type);
-			machine__process_event(machine, event);
+			machine__process_event(machine, event, &sample);
 		} else
 			++session->stats.nr_unknown_events;
 next_event:
@@ -932,11 +933,8 @@
 	struct perf_record_opts *opts = &top->record_opts;
 	pthread_t thread;
 	int ret;
-	/*
-	 * FIXME: perf_session__new should allow passing a O_MMAP, so that all this
-	 * mmap reading, etc is encapsulated in it. Use O_WRONLY for now.
-	 */
-	top->session = perf_session__new(NULL, O_WRONLY, false, false, NULL);
+
+	top->session = perf_session__new(NULL, false, NULL);
 	if (top->session == NULL)
 		return -ENOMEM;
 
@@ -1043,7 +1041,7 @@
 
 int cmd_top(int argc, const char **argv, const char *prefix __maybe_unused)
 {
-	int status;
+	int status = -1;
 	char errbuf[BUFSIZ];
 	struct perf_top top = {
 		.count_filter	     = 5,
@@ -1053,10 +1051,11 @@
 			.user_freq	= UINT_MAX,
 			.user_interval	= ULLONG_MAX,
 			.freq		= 4000, /* 4 KHz */
-			.target		     = {
+			.target		= {
 				.uses_mmap   = true,
 			},
 		},
+		.max_stack	     = PERF_MAX_STACK_DEPTH,
 		.sym_pcnt_filter     = 5,
 	};
 	struct perf_record_opts *opts = &top.record_opts;
@@ -1076,10 +1075,13 @@
 		    "list of cpus to monitor"),
 	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
 		   "file", "vmlinux pathname"),
+	OPT_BOOLEAN(0, "ignore-vmlinux", &symbol_conf.ignore_vmlinux,
+		    "don't load vmlinux even if found"),
 	OPT_BOOLEAN('K', "hide_kernel_symbols", &top.hide_kernel_symbols,
 		    "hide kernel symbols"),
-	OPT_UINTEGER('m', "mmap-pages", &opts->mmap_pages,
-		     "number of mmap data pages"),
+	OPT_CALLBACK('m', "mmap-pages", &opts->mmap_pages, "pages",
+		     "number of mmap data pages",
+		     perf_evlist__parse_mmap_pages),
 	OPT_INTEGER('r', "realtime", &top.realtime_prio,
 		    "collect data with this RT SCHED_FIFO priority"),
 	OPT_INTEGER('d', "delay", &top.delay_secs,
@@ -1105,7 +1107,8 @@
 	OPT_INCR('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
 	OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
-		   "sort by key(s): pid, comm, dso, symbol, parent, weight, local_weight"),
+		   "sort by key(s): pid, comm, dso, symbol, parent, weight, local_weight,"
+		   " abort, in_tx, transaction"),
 	OPT_BOOLEAN('n', "show-nr-samples", &symbol_conf.show_nr_samples,
 		    "Show a column with the number of samples"),
 	OPT_CALLBACK_NOOPT('G', NULL, &top.record_opts,
@@ -1114,6 +1117,9 @@
 	OPT_CALLBACK(0, "call-graph", &top.record_opts,
 		     "mode[,dump_size]", record_callchain_help,
 		     &parse_callchain_opt),
+	OPT_INTEGER(0, "max-stack", &top.max_stack,
+		    "Set the maximum stack depth when parsing the callchain. "
+		    "Default: " __stringify(PERF_MAX_STACK_DEPTH)),
 	OPT_CALLBACK(0, "ignore-callees", NULL, "regex",
 		   "ignore callees of these functions in call graphs",
 		   report_parse_ignore_callees_opt),
@@ -1154,8 +1160,10 @@
 	if (sort_order == default_sort_order)
 		sort_order = "dso,symbol";
 
-	if (setup_sorting() < 0)
-		usage_with_options(top_usage, options);
+	if (setup_sorting() < 0) {
+		parse_options_usage(top_usage, options, "s", 1);
+		goto out_delete_evlist;
+	}
 
 	/* display thread wants entries to be collapsed in a different tree */
 	sort__need_collapse = 1;
@@ -1201,20 +1209,7 @@
 	if (top.delay_secs < 1)
 		top.delay_secs = 1;
 
-	if (opts->user_interval != ULLONG_MAX)
-		opts->default_interval = opts->user_interval;
-	if (opts->user_freq != UINT_MAX)
-		opts->freq = opts->user_freq;
-
-	/*
-	 * User specified count overrides default frequency.
-	 */
-	if (opts->default_interval)
-		opts->freq = 0;
-	else if (opts->freq) {
-		opts->default_interval = opts->freq;
-	} else {
-		ui__error("frequency and count are zero, aborting\n");
+	if (perf_record_opts__config(opts)) {
 		status = -EINVAL;
 		goto out_delete_maps;
 	}
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 99c8d9a..329b783 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -10,9 +10,11 @@
 #include "util/strlist.h"
 #include "util/intlist.h"
 #include "util/thread_map.h"
+#include "util/stat.h"
 
 #include <libaudit.h>
 #include <stdlib.h>
+#include <sys/eventfd.h>
 #include <sys/mman.h>
 #include <linux/futex.h>
 
@@ -33,49 +35,279 @@
 # define MADV_UNMERGEABLE	13
 #endif
 
-static size_t syscall_arg__scnprintf_hex(char *bf, size_t size,
-					 unsigned long arg,
-					 u8 arg_idx __maybe_unused,
-					 u8 *arg_mask __maybe_unused)
+struct tp_field {
+	int offset;
+	union {
+		u64 (*integer)(struct tp_field *field, struct perf_sample *sample);
+		void *(*pointer)(struct tp_field *field, struct perf_sample *sample);
+	};
+};
+
+#define TP_UINT_FIELD(bits) \
+static u64 tp_field__u##bits(struct tp_field *field, struct perf_sample *sample) \
+{ \
+	return *(u##bits *)(sample->raw_data + field->offset); \
+}
+
+TP_UINT_FIELD(8);
+TP_UINT_FIELD(16);
+TP_UINT_FIELD(32);
+TP_UINT_FIELD(64);
+
+#define TP_UINT_FIELD__SWAPPED(bits) \
+static u64 tp_field__swapped_u##bits(struct tp_field *field, struct perf_sample *sample) \
+{ \
+	u##bits value = *(u##bits *)(sample->raw_data + field->offset); \
+	return bswap_##bits(value);\
+}
+
+TP_UINT_FIELD__SWAPPED(16);
+TP_UINT_FIELD__SWAPPED(32);
+TP_UINT_FIELD__SWAPPED(64);
+
+static int tp_field__init_uint(struct tp_field *field,
+			       struct format_field *format_field,
+			       bool needs_swap)
 {
-	return scnprintf(bf, size, "%#lx", arg);
+	field->offset = format_field->offset;
+
+	switch (format_field->size) {
+	case 1:
+		field->integer = tp_field__u8;
+		break;
+	case 2:
+		field->integer = needs_swap ? tp_field__swapped_u16 : tp_field__u16;
+		break;
+	case 4:
+		field->integer = needs_swap ? tp_field__swapped_u32 : tp_field__u32;
+		break;
+	case 8:
+		field->integer = needs_swap ? tp_field__swapped_u64 : tp_field__u64;
+		break;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static void *tp_field__ptr(struct tp_field *field, struct perf_sample *sample)
+{
+	return sample->raw_data + field->offset;
+}
+
+static int tp_field__init_ptr(struct tp_field *field, struct format_field *format_field)
+{
+	field->offset = format_field->offset;
+	field->pointer = tp_field__ptr;
+	return 0;
+}
+
+struct syscall_tp {
+	struct tp_field id;
+	union {
+		struct tp_field args, ret;
+	};
+};
+
+static int perf_evsel__init_tp_uint_field(struct perf_evsel *evsel,
+					  struct tp_field *field,
+					  const char *name)
+{
+	struct format_field *format_field = perf_evsel__field(evsel, name);
+
+	if (format_field == NULL)
+		return -1;
+
+	return tp_field__init_uint(field, format_field, evsel->needs_swap);
+}
+
+#define perf_evsel__init_sc_tp_uint_field(evsel, name) \
+	({ struct syscall_tp *sc = evsel->priv;\
+	   perf_evsel__init_tp_uint_field(evsel, &sc->name, #name); })
+
+static int perf_evsel__init_tp_ptr_field(struct perf_evsel *evsel,
+					 struct tp_field *field,
+					 const char *name)
+{
+	struct format_field *format_field = perf_evsel__field(evsel, name);
+
+	if (format_field == NULL)
+		return -1;
+
+	return tp_field__init_ptr(field, format_field);
+}
+
+#define perf_evsel__init_sc_tp_ptr_field(evsel, name) \
+	({ struct syscall_tp *sc = evsel->priv;\
+	   perf_evsel__init_tp_ptr_field(evsel, &sc->name, #name); })
+
+static void perf_evsel__delete_priv(struct perf_evsel *evsel)
+{
+	free(evsel->priv);
+	evsel->priv = NULL;
+	perf_evsel__delete(evsel);
+}
+
+static struct perf_evsel *perf_evsel__syscall_newtp(const char *direction,
+						    void *handler, int idx)
+{
+	struct perf_evsel *evsel = perf_evsel__newtp("raw_syscalls", direction, idx);
+
+	if (evsel) {
+		evsel->priv = malloc(sizeof(struct syscall_tp));
+
+		if (evsel->priv == NULL)
+			goto out_delete;
+
+		if (perf_evsel__init_sc_tp_uint_field(evsel, id))
+			goto out_delete;
+
+		evsel->handler = handler;
+	}
+
+	return evsel;
+
+out_delete:
+	perf_evsel__delete_priv(evsel);
+	return NULL;
+}
+
+#define perf_evsel__sc_tp_uint(evsel, name, sample) \
+	({ struct syscall_tp *fields = evsel->priv; \
+	   fields->name.integer(&fields->name, sample); })
+
+#define perf_evsel__sc_tp_ptr(evsel, name, sample) \
+	({ struct syscall_tp *fields = evsel->priv; \
+	   fields->name.pointer(&fields->name, sample); })
+
+static int perf_evlist__add_syscall_newtp(struct perf_evlist *evlist,
+					  void *sys_enter_handler,
+					  void *sys_exit_handler)
+{
+	int ret = -1;
+	int idx = evlist->nr_entries;
+	struct perf_evsel *sys_enter, *sys_exit;
+
+	sys_enter = perf_evsel__syscall_newtp("sys_enter", sys_enter_handler, idx++);
+	if (sys_enter == NULL)
+		goto out;
+
+	if (perf_evsel__init_sc_tp_ptr_field(sys_enter, args))
+		goto out_delete_sys_enter;
+
+	sys_exit = perf_evsel__syscall_newtp("sys_exit", sys_exit_handler, idx++);
+	if (sys_exit == NULL)
+		goto out_delete_sys_enter;
+
+	if (perf_evsel__init_sc_tp_uint_field(sys_exit, ret))
+		goto out_delete_sys_exit;
+
+	perf_evlist__add(evlist, sys_enter);
+	perf_evlist__add(evlist, sys_exit);
+
+	ret = 0;
+out:
+	return ret;
+
+out_delete_sys_exit:
+	perf_evsel__delete_priv(sys_exit);
+out_delete_sys_enter:
+	perf_evsel__delete_priv(sys_enter);
+	goto out;
+}
+
+
+struct syscall_arg {
+	unsigned long val;
+	struct thread *thread;
+	struct trace  *trace;
+	void	      *parm;
+	u8	      idx;
+	u8	      mask;
+};
+
+struct strarray {
+	int	    offset;
+	int	    nr_entries;
+	const char **entries;
+};
+
+#define DEFINE_STRARRAY(array) struct strarray strarray__##array = { \
+	.nr_entries = ARRAY_SIZE(array), \
+	.entries = array, \
+}
+
+#define DEFINE_STRARRAY_OFFSET(array, off) struct strarray strarray__##array = { \
+	.offset	    = off, \
+	.nr_entries = ARRAY_SIZE(array), \
+	.entries = array, \
+}
+
+static size_t __syscall_arg__scnprintf_strarray(char *bf, size_t size,
+						const char *intfmt,
+					        struct syscall_arg *arg)
+{
+	struct strarray *sa = arg->parm;
+	int idx = arg->val - sa->offset;
+
+	if (idx < 0 || idx >= sa->nr_entries)
+		return scnprintf(bf, size, intfmt, arg->val);
+
+	return scnprintf(bf, size, "%s", sa->entries[idx]);
+}
+
+static size_t syscall_arg__scnprintf_strarray(char *bf, size_t size,
+					      struct syscall_arg *arg)
+{
+	return __syscall_arg__scnprintf_strarray(bf, size, "%d", arg);
+}
+
+#define SCA_STRARRAY syscall_arg__scnprintf_strarray
+
+static size_t syscall_arg__scnprintf_strhexarray(char *bf, size_t size,
+						 struct syscall_arg *arg)
+{
+	return __syscall_arg__scnprintf_strarray(bf, size, "%#x", arg);
+}
+
+#define SCA_STRHEXARRAY syscall_arg__scnprintf_strhexarray
+
+static size_t syscall_arg__scnprintf_fd(char *bf, size_t size,
+					struct syscall_arg *arg);
+
+#define SCA_FD syscall_arg__scnprintf_fd
+
+static size_t syscall_arg__scnprintf_fd_at(char *bf, size_t size,
+					   struct syscall_arg *arg)
+{
+	int fd = arg->val;
+
+	if (fd == AT_FDCWD)
+		return scnprintf(bf, size, "CWD");
+
+	return syscall_arg__scnprintf_fd(bf, size, arg);
+}
+
+#define SCA_FDAT syscall_arg__scnprintf_fd_at
+
+static size_t syscall_arg__scnprintf_close_fd(char *bf, size_t size,
+					      struct syscall_arg *arg);
+
+#define SCA_CLOSE_FD syscall_arg__scnprintf_close_fd
+
+static size_t syscall_arg__scnprintf_hex(char *bf, size_t size,
+					 struct syscall_arg *arg)
+{
+	return scnprintf(bf, size, "%#lx", arg->val);
 }
 
 #define SCA_HEX syscall_arg__scnprintf_hex
 
-static size_t syscall_arg__scnprintf_whence(char *bf, size_t size,
-					    unsigned long arg,
-					    u8 arg_idx __maybe_unused,
-					    u8 *arg_mask __maybe_unused)
-{
-	int whence = arg;
-
-	switch (whence) {
-#define P_WHENCE(n) case SEEK_##n: return scnprintf(bf, size, #n)
-	P_WHENCE(SET);
-	P_WHENCE(CUR);
-	P_WHENCE(END);
-#ifdef SEEK_DATA
-	P_WHENCE(DATA);
-#endif
-#ifdef SEEK_HOLE
-	P_WHENCE(HOLE);
-#endif
-#undef P_WHENCE
-	default: break;
-	}
-
-	return scnprintf(bf, size, "%#x", whence);
-}
-
-#define SCA_WHENCE syscall_arg__scnprintf_whence
-
 static size_t syscall_arg__scnprintf_mmap_prot(char *bf, size_t size,
-					       unsigned long arg,
-					       u8 arg_idx __maybe_unused,
-					       u8 *arg_mask __maybe_unused)
+					       struct syscall_arg *arg)
 {
-	int printed = 0, prot = arg;
+	int printed = 0, prot = arg->val;
 
 	if (prot == PROT_NONE)
 		return scnprintf(bf, size, "NONE");
@@ -104,10 +336,9 @@
 #define SCA_MMAP_PROT syscall_arg__scnprintf_mmap_prot
 
 static size_t syscall_arg__scnprintf_mmap_flags(char *bf, size_t size,
-						unsigned long arg, u8 arg_idx __maybe_unused,
-						u8 *arg_mask __maybe_unused)
+						struct syscall_arg *arg)
 {
-	int printed = 0, flags = arg;
+	int printed = 0, flags = arg->val;
 
 #define	P_MMAP_FLAG(n) \
 	if (flags & MAP_##n) { \
@@ -148,10 +379,9 @@
 #define SCA_MMAP_FLAGS syscall_arg__scnprintf_mmap_flags
 
 static size_t syscall_arg__scnprintf_madvise_behavior(char *bf, size_t size,
-						      unsigned long arg, u8 arg_idx __maybe_unused,
-						      u8 *arg_mask __maybe_unused)
+						      struct syscall_arg *arg)
 {
-	int behavior = arg;
+	int behavior = arg->val;
 
 	switch (behavior) {
 #define	P_MADV_BHV(n) case MADV_##n: return scnprintf(bf, size, #n)
@@ -190,8 +420,38 @@
 
 #define SCA_MADV_BHV syscall_arg__scnprintf_madvise_behavior
 
-static size_t syscall_arg__scnprintf_futex_op(char *bf, size_t size, unsigned long arg,
-					      u8 arg_idx __maybe_unused, u8 *arg_mask)
+static size_t syscall_arg__scnprintf_flock(char *bf, size_t size,
+					   struct syscall_arg *arg)
+{
+	int printed = 0, op = arg->val;
+
+	if (op == 0)
+		return scnprintf(bf, size, "NONE");
+#define	P_CMD(cmd) \
+	if ((op & LOCK_##cmd) == LOCK_##cmd) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s", printed ? "|" : "", #cmd); \
+		op &= ~LOCK_##cmd; \
+	}
+
+	P_CMD(SH);
+	P_CMD(EX);
+	P_CMD(NB);
+	P_CMD(UN);
+	P_CMD(MAND);
+	P_CMD(RW);
+	P_CMD(READ);
+	P_CMD(WRITE);
+#undef P_OP
+
+	if (op)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", op);
+
+	return printed;
+}
+
+#define SCA_FLOCK syscall_arg__scnprintf_flock
+
+static size_t syscall_arg__scnprintf_futex_op(char *bf, size_t size, struct syscall_arg *arg)
 {
 	enum syscall_futex_args {
 		SCF_UADDR   = (1 << 0),
@@ -201,24 +461,24 @@
 		SCF_UADDR2  = (1 << 4),
 		SCF_VAL3    = (1 << 5),
 	};
-	int op = arg;
+	int op = arg->val;
 	int cmd = op & FUTEX_CMD_MASK;
 	size_t printed = 0;
 
 	switch (cmd) {
 #define	P_FUTEX_OP(n) case FUTEX_##n: printed = scnprintf(bf, size, #n);
-	P_FUTEX_OP(WAIT);	    *arg_mask |= SCF_VAL3|SCF_UADDR2;		  break;
-	P_FUTEX_OP(WAKE);	    *arg_mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
-	P_FUTEX_OP(FD);		    *arg_mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
-	P_FUTEX_OP(REQUEUE);	    *arg_mask |= SCF_VAL3|SCF_TIMEOUT;	          break;
-	P_FUTEX_OP(CMP_REQUEUE);    *arg_mask |= SCF_TIMEOUT;			  break;
-	P_FUTEX_OP(CMP_REQUEUE_PI); *arg_mask |= SCF_TIMEOUT;			  break;
+	P_FUTEX_OP(WAIT);	    arg->mask |= SCF_VAL3|SCF_UADDR2;		  break;
+	P_FUTEX_OP(WAKE);	    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(FD);		    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(REQUEUE);	    arg->mask |= SCF_VAL3|SCF_TIMEOUT;	          break;
+	P_FUTEX_OP(CMP_REQUEUE);    arg->mask |= SCF_TIMEOUT;			  break;
+	P_FUTEX_OP(CMP_REQUEUE_PI); arg->mask |= SCF_TIMEOUT;			  break;
 	P_FUTEX_OP(WAKE_OP);							  break;
-	P_FUTEX_OP(LOCK_PI);	    *arg_mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
-	P_FUTEX_OP(UNLOCK_PI);	    *arg_mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
-	P_FUTEX_OP(TRYLOCK_PI);	    *arg_mask |= SCF_VAL3|SCF_UADDR2;		  break;
-	P_FUTEX_OP(WAIT_BITSET);    *arg_mask |= SCF_UADDR2;			  break;
-	P_FUTEX_OP(WAKE_BITSET);    *arg_mask |= SCF_UADDR2;			  break;
+	P_FUTEX_OP(LOCK_PI);	    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(UNLOCK_PI);	    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(TRYLOCK_PI);	    arg->mask |= SCF_VAL3|SCF_UADDR2;		  break;
+	P_FUTEX_OP(WAIT_BITSET);    arg->mask |= SCF_UADDR2;			  break;
+	P_FUTEX_OP(WAKE_BITSET);    arg->mask |= SCF_UADDR2;			  break;
 	P_FUTEX_OP(WAIT_REQUEUE_PI);						  break;
 	default: printed = scnprintf(bf, size, "%#x", cmd);			  break;
 	}
@@ -234,14 +494,194 @@
 
 #define SCA_FUTEX_OP  syscall_arg__scnprintf_futex_op
 
-static size_t syscall_arg__scnprintf_open_flags(char *bf, size_t size,
-					       unsigned long arg,
-					       u8 arg_idx, u8 *arg_mask)
+static const char *epoll_ctl_ops[] = { "ADD", "DEL", "MOD", };
+static DEFINE_STRARRAY_OFFSET(epoll_ctl_ops, 1);
+
+static const char *itimers[] = { "REAL", "VIRTUAL", "PROF", };
+static DEFINE_STRARRAY(itimers);
+
+static const char *whences[] = { "SET", "CUR", "END",
+#ifdef SEEK_DATA
+"DATA",
+#endif
+#ifdef SEEK_HOLE
+"HOLE",
+#endif
+};
+static DEFINE_STRARRAY(whences);
+
+static const char *fcntl_cmds[] = {
+	"DUPFD", "GETFD", "SETFD", "GETFL", "SETFL", "GETLK", "SETLK",
+	"SETLKW", "SETOWN", "GETOWN", "SETSIG", "GETSIG", "F_GETLK64",
+	"F_SETLK64", "F_SETLKW64", "F_SETOWN_EX", "F_GETOWN_EX",
+	"F_GETOWNER_UIDS",
+};
+static DEFINE_STRARRAY(fcntl_cmds);
+
+static const char *rlimit_resources[] = {
+	"CPU", "FSIZE", "DATA", "STACK", "CORE", "RSS", "NPROC", "NOFILE",
+	"MEMLOCK", "AS", "LOCKS", "SIGPENDING", "MSGQUEUE", "NICE", "RTPRIO",
+	"RTTIME",
+};
+static DEFINE_STRARRAY(rlimit_resources);
+
+static const char *sighow[] = { "BLOCK", "UNBLOCK", "SETMASK", };
+static DEFINE_STRARRAY(sighow);
+
+static const char *clockid[] = {
+	"REALTIME", "MONOTONIC", "PROCESS_CPUTIME_ID", "THREAD_CPUTIME_ID",
+	"MONOTONIC_RAW", "REALTIME_COARSE", "MONOTONIC_COARSE",
+};
+static DEFINE_STRARRAY(clockid);
+
+static const char *socket_families[] = {
+	"UNSPEC", "LOCAL", "INET", "AX25", "IPX", "APPLETALK", "NETROM",
+	"BRIDGE", "ATMPVC", "X25", "INET6", "ROSE", "DECnet", "NETBEUI",
+	"SECURITY", "KEY", "NETLINK", "PACKET", "ASH", "ECONET", "ATMSVC",
+	"RDS", "SNA", "IRDA", "PPPOX", "WANPIPE", "LLC", "IB", "CAN", "TIPC",
+	"BLUETOOTH", "IUCV", "RXRPC", "ISDN", "PHONET", "IEEE802154", "CAIF",
+	"ALG", "NFC", "VSOCK",
+};
+static DEFINE_STRARRAY(socket_families);
+
+#ifndef SOCK_TYPE_MASK
+#define SOCK_TYPE_MASK 0xf
+#endif
+
+static size_t syscall_arg__scnprintf_socket_type(char *bf, size_t size,
+						      struct syscall_arg *arg)
 {
-	int printed = 0, flags = arg;
+	size_t printed;
+	int type = arg->val,
+	    flags = type & ~SOCK_TYPE_MASK;
+
+	type &= SOCK_TYPE_MASK;
+	/*
+ 	 * Can't use a strarray, MIPS may override for ABI reasons.
+ 	 */
+	switch (type) {
+#define	P_SK_TYPE(n) case SOCK_##n: printed = scnprintf(bf, size, #n); break;
+	P_SK_TYPE(STREAM);
+	P_SK_TYPE(DGRAM);
+	P_SK_TYPE(RAW);
+	P_SK_TYPE(RDM);
+	P_SK_TYPE(SEQPACKET);
+	P_SK_TYPE(DCCP);
+	P_SK_TYPE(PACKET);
+#undef P_SK_TYPE
+	default:
+		printed = scnprintf(bf, size, "%#x", type);
+	}
+
+#define	P_SK_FLAG(n) \
+	if (flags & SOCK_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "|%s", #n); \
+		flags &= ~SOCK_##n; \
+	}
+
+	P_SK_FLAG(CLOEXEC);
+	P_SK_FLAG(NONBLOCK);
+#undef P_SK_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "|%#x", flags);
+
+	return printed;
+}
+
+#define SCA_SK_TYPE syscall_arg__scnprintf_socket_type
+
+#ifndef MSG_PROBE
+#define MSG_PROBE	     0x10
+#endif
+#ifndef MSG_WAITFORONE
+#define MSG_WAITFORONE	0x10000
+#endif
+#ifndef MSG_SENDPAGE_NOTLAST
+#define MSG_SENDPAGE_NOTLAST 0x20000
+#endif
+#ifndef MSG_FASTOPEN
+#define MSG_FASTOPEN	     0x20000000
+#endif
+
+static size_t syscall_arg__scnprintf_msg_flags(char *bf, size_t size,
+					       struct syscall_arg *arg)
+{
+	int printed = 0, flags = arg->val;
+
+	if (flags == 0)
+		return scnprintf(bf, size, "NONE");
+#define	P_MSG_FLAG(n) \
+	if (flags & MSG_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s", printed ? "|" : "", #n); \
+		flags &= ~MSG_##n; \
+	}
+
+	P_MSG_FLAG(OOB);
+	P_MSG_FLAG(PEEK);
+	P_MSG_FLAG(DONTROUTE);
+	P_MSG_FLAG(TRYHARD);
+	P_MSG_FLAG(CTRUNC);
+	P_MSG_FLAG(PROBE);
+	P_MSG_FLAG(TRUNC);
+	P_MSG_FLAG(DONTWAIT);
+	P_MSG_FLAG(EOR);
+	P_MSG_FLAG(WAITALL);
+	P_MSG_FLAG(FIN);
+	P_MSG_FLAG(SYN);
+	P_MSG_FLAG(CONFIRM);
+	P_MSG_FLAG(RST);
+	P_MSG_FLAG(ERRQUEUE);
+	P_MSG_FLAG(NOSIGNAL);
+	P_MSG_FLAG(MORE);
+	P_MSG_FLAG(WAITFORONE);
+	P_MSG_FLAG(SENDPAGE_NOTLAST);
+	P_MSG_FLAG(FASTOPEN);
+	P_MSG_FLAG(CMSG_CLOEXEC);
+#undef P_MSG_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
+
+#define SCA_MSG_FLAGS syscall_arg__scnprintf_msg_flags
+
+static size_t syscall_arg__scnprintf_access_mode(char *bf, size_t size,
+						 struct syscall_arg *arg)
+{
+	size_t printed = 0;
+	int mode = arg->val;
+
+	if (mode == F_OK) /* 0 */
+		return scnprintf(bf, size, "F");
+#define	P_MODE(n) \
+	if (mode & n##_OK) { \
+		printed += scnprintf(bf + printed, size - printed, "%s", #n); \
+		mode &= ~n##_OK; \
+	}
+
+	P_MODE(R);
+	P_MODE(W);
+	P_MODE(X);
+#undef P_MODE
+
+	if (mode)
+		printed += scnprintf(bf + printed, size - printed, "|%#x", mode);
+
+	return printed;
+}
+
+#define SCA_ACCMODE syscall_arg__scnprintf_access_mode
+
+static size_t syscall_arg__scnprintf_open_flags(char *bf, size_t size,
+					       struct syscall_arg *arg)
+{
+	int printed = 0, flags = arg->val;
 
 	if (!(flags & O_CREAT))
-		*arg_mask |= 1 << (arg_idx + 1); /* Mask the mode parm */
+		arg->mask |= 1 << (arg->idx + 1); /* Mask the mode parm */
 
 	if (flags == 0)
 		return scnprintf(bf, size, "RDONLY");
@@ -291,32 +731,225 @@
 
 #define SCA_OPEN_FLAGS syscall_arg__scnprintf_open_flags
 
+static size_t syscall_arg__scnprintf_eventfd_flags(char *bf, size_t size,
+						   struct syscall_arg *arg)
+{
+	int printed = 0, flags = arg->val;
+
+	if (flags == 0)
+		return scnprintf(bf, size, "NONE");
+#define	P_FLAG(n) \
+	if (flags & EFD_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s", printed ? "|" : "", #n); \
+		flags &= ~EFD_##n; \
+	}
+
+	P_FLAG(SEMAPHORE);
+	P_FLAG(CLOEXEC);
+	P_FLAG(NONBLOCK);
+#undef P_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
+
+#define SCA_EFD_FLAGS syscall_arg__scnprintf_eventfd_flags
+
+static size_t syscall_arg__scnprintf_pipe_flags(char *bf, size_t size,
+						struct syscall_arg *arg)
+{
+	int printed = 0, flags = arg->val;
+
+#define	P_FLAG(n) \
+	if (flags & O_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s", printed ? "|" : "", #n); \
+		flags &= ~O_##n; \
+	}
+
+	P_FLAG(CLOEXEC);
+	P_FLAG(NONBLOCK);
+#undef P_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
+
+#define SCA_PIPE_FLAGS syscall_arg__scnprintf_pipe_flags
+
+static size_t syscall_arg__scnprintf_signum(char *bf, size_t size, struct syscall_arg *arg)
+{
+	int sig = arg->val;
+
+	switch (sig) {
+#define	P_SIGNUM(n) case SIG##n: return scnprintf(bf, size, #n)
+	P_SIGNUM(HUP);
+	P_SIGNUM(INT);
+	P_SIGNUM(QUIT);
+	P_SIGNUM(ILL);
+	P_SIGNUM(TRAP);
+	P_SIGNUM(ABRT);
+	P_SIGNUM(BUS);
+	P_SIGNUM(FPE);
+	P_SIGNUM(KILL);
+	P_SIGNUM(USR1);
+	P_SIGNUM(SEGV);
+	P_SIGNUM(USR2);
+	P_SIGNUM(PIPE);
+	P_SIGNUM(ALRM);
+	P_SIGNUM(TERM);
+	P_SIGNUM(STKFLT);
+	P_SIGNUM(CHLD);
+	P_SIGNUM(CONT);
+	P_SIGNUM(STOP);
+	P_SIGNUM(TSTP);
+	P_SIGNUM(TTIN);
+	P_SIGNUM(TTOU);
+	P_SIGNUM(URG);
+	P_SIGNUM(XCPU);
+	P_SIGNUM(XFSZ);
+	P_SIGNUM(VTALRM);
+	P_SIGNUM(PROF);
+	P_SIGNUM(WINCH);
+	P_SIGNUM(IO);
+	P_SIGNUM(PWR);
+	P_SIGNUM(SYS);
+	default: break;
+	}
+
+	return scnprintf(bf, size, "%#x", sig);
+}
+
+#define SCA_SIGNUM syscall_arg__scnprintf_signum
+
+#define TCGETS		0x5401
+
+static const char *tioctls[] = {
+	"TCGETS", "TCSETS", "TCSETSW", "TCSETSF", "TCGETA", "TCSETA", "TCSETAW",
+	"TCSETAF", "TCSBRK", "TCXONC", "TCFLSH", "TIOCEXCL", "TIOCNXCL",
+	"TIOCSCTTY", "TIOCGPGRP", "TIOCSPGRP", "TIOCOUTQ", "TIOCSTI",
+	"TIOCGWINSZ", "TIOCSWINSZ", "TIOCMGET", "TIOCMBIS", "TIOCMBIC",
+	"TIOCMSET", "TIOCGSOFTCAR", "TIOCSSOFTCAR", "FIONREAD", "TIOCLINUX",
+	"TIOCCONS", "TIOCGSERIAL", "TIOCSSERIAL", "TIOCPKT", "FIONBIO",
+	"TIOCNOTTY", "TIOCSETD", "TIOCGETD", "TCSBRKP", [0x27] = "TIOCSBRK",
+	"TIOCCBRK", "TIOCGSID", "TCGETS2", "TCSETS2", "TCSETSW2", "TCSETSF2",
+	"TIOCGRS485", "TIOCSRS485", "TIOCGPTN", "TIOCSPTLCK",
+	"TIOCGDEV||TCGETX", "TCSETX", "TCSETXF", "TCSETXW", "TIOCSIG",
+	"TIOCVHANGUP", "TIOCGPKT", "TIOCGPTLCK", "TIOCGEXCL",
+	[0x50] = "FIONCLEX", "FIOCLEX", "FIOASYNC", "TIOCSERCONFIG",
+	"TIOCSERGWILD", "TIOCSERSWILD", "TIOCGLCKTRMIOS", "TIOCSLCKTRMIOS",
+	"TIOCSERGSTRUCT", "TIOCSERGETLSR", "TIOCSERGETMULTI", "TIOCSERSETMULTI",
+	"TIOCMIWAIT", "TIOCGICOUNT", [0x60] = "FIOQSIZE",
+};
+
+static DEFINE_STRARRAY_OFFSET(tioctls, 0x5401);
+
+#define STRARRAY(arg, name, array) \
+	  .arg_scnprintf = { [arg] = SCA_STRARRAY, }, \
+	  .arg_parm	 = { [arg] = &strarray__##array, }
+
 static struct syscall_fmt {
 	const char *name;
 	const char *alias;
-	size_t	   (*arg_scnprintf[6])(char *bf, size_t size, unsigned long arg, u8 arg_idx, u8 *arg_mask);
+	size_t	   (*arg_scnprintf[6])(char *bf, size_t size, struct syscall_arg *arg);
+	void	   *arg_parm[6];
 	bool	   errmsg;
 	bool	   timeout;
 	bool	   hexret;
 } syscall_fmts[] = {
-	{ .name	    = "access",	    .errmsg = true, },
+	{ .name	    = "access",	    .errmsg = true,
+	  .arg_scnprintf = { [1] = SCA_ACCMODE, /* mode */ }, },
 	{ .name	    = "arch_prctl", .errmsg = true, .alias = "prctl", },
 	{ .name	    = "brk",	    .hexret = true,
 	  .arg_scnprintf = { [0] = SCA_HEX, /* brk */ }, },
-	{ .name	    = "mmap",	    .hexret = true, },
+	{ .name     = "clock_gettime",  .errmsg = true, STRARRAY(0, clk_id, clockid), },
+	{ .name	    = "close",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_CLOSE_FD, /* fd */ }, }, 
 	{ .name	    = "connect",    .errmsg = true, },
-	{ .name	    = "fstat",	    .errmsg = true, .alias = "newfstat", },
-	{ .name	    = "fstatat",    .errmsg = true, .alias = "newfstatat", },
+	{ .name	    = "dup",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "dup2",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "dup3",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "epoll_ctl",  .errmsg = true, STRARRAY(1, op, epoll_ctl_ops), },
+	{ .name	    = "eventfd2",   .errmsg = true,
+	  .arg_scnprintf = { [1] = SCA_EFD_FLAGS, /* flags */ }, },
+	{ .name	    = "faccessat",  .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
+	{ .name	    = "fadvise64",  .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fallocate",  .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fchdir",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fchmod",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fchmodat",   .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, }, 
+	{ .name	    = "fchown",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fchownat",   .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, }, 
+	{ .name	    = "fcntl",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */
+			     [1] = SCA_STRARRAY, /* cmd */ },
+	  .arg_parm	 = { [1] = &strarray__fcntl_cmds, /* cmd */ }, },
+	{ .name	    = "fdatasync",  .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "flock",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */
+			     [1] = SCA_FLOCK, /* cmd */ }, },
+	{ .name	    = "fsetxattr",  .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fstat",	    .errmsg = true, .alias = "newfstat",
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fstatat",    .errmsg = true, .alias = "newfstatat",
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, }, 
+	{ .name	    = "fstatfs",    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "fsync",    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "ftruncate", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
 	{ .name	    = "futex",	    .errmsg = true,
 	  .arg_scnprintf = { [1] = SCA_FUTEX_OP, /* op */ }, },
+	{ .name	    = "futimesat", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, }, 
+	{ .name	    = "getdents",   .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "getdents64", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "getitimer",  .errmsg = true, STRARRAY(0, which, itimers), },
+	{ .name	    = "getrlimit",  .errmsg = true, STRARRAY(0, resource, rlimit_resources), },
 	{ .name	    = "ioctl",	    .errmsg = true,
-	  .arg_scnprintf = { [2] = SCA_HEX, /* arg */ }, },
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ 
+			     [1] = SCA_STRHEXARRAY, /* cmd */
+			     [2] = SCA_HEX, /* arg */ },
+	  .arg_parm	 = { [1] = &strarray__tioctls, /* cmd */ }, },
+	{ .name	    = "kill",	    .errmsg = true,
+	  .arg_scnprintf = { [1] = SCA_SIGNUM, /* sig */ }, },
+	{ .name	    = "linkat",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, }, 
 	{ .name	    = "lseek",	    .errmsg = true,
-	  .arg_scnprintf = { [2] = SCA_WHENCE, /* whence */ }, },
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */
+			     [2] = SCA_STRARRAY, /* whence */ },
+	  .arg_parm	 = { [2] = &strarray__whences, /* whence */ }, },
 	{ .name	    = "lstat",	    .errmsg = true, .alias = "newlstat", },
 	{ .name     = "madvise",    .errmsg = true,
 	  .arg_scnprintf = { [0] = SCA_HEX,	 /* start */
 			     [2] = SCA_MADV_BHV, /* behavior */ }, },
+	{ .name	    = "mkdirat",    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, }, 
+	{ .name	    = "mknodat",    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, }, 
+	{ .name	    = "mlock",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_HEX, /* addr */ }, },
+	{ .name	    = "mlockall",   .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_HEX, /* addr */ }, },
 	{ .name	    = "mmap",	    .hexret = true,
 	  .arg_scnprintf = { [0] = SCA_HEX,	  /* addr */
 			     [2] = SCA_MMAP_PROT, /* prot */
@@ -327,24 +960,91 @@
 	{ .name	    = "mremap",	    .hexret = true,
 	  .arg_scnprintf = { [0] = SCA_HEX, /* addr */
 			     [4] = SCA_HEX, /* new_addr */ }, },
+	{ .name	    = "munlock",    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_HEX, /* addr */ }, },
 	{ .name	    = "munmap",	    .errmsg = true,
 	  .arg_scnprintf = { [0] = SCA_HEX, /* addr */ }, },
+	{ .name	    = "name_to_handle_at", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, }, 
+	{ .name	    = "newfstatat", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, }, 
 	{ .name	    = "open",	    .errmsg = true,
 	  .arg_scnprintf = { [1] = SCA_OPEN_FLAGS, /* flags */ }, },
 	{ .name	    = "open_by_handle_at", .errmsg = true,
-	  .arg_scnprintf = { [2] = SCA_OPEN_FLAGS, /* flags */ }, },
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
+			     [2] = SCA_OPEN_FLAGS, /* flags */ }, },
 	{ .name	    = "openat",	    .errmsg = true,
-	  .arg_scnprintf = { [2] = SCA_OPEN_FLAGS, /* flags */ }, },
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
+			     [2] = SCA_OPEN_FLAGS, /* flags */ }, },
+	{ .name	    = "pipe2",	    .errmsg = true,
+	  .arg_scnprintf = { [1] = SCA_PIPE_FLAGS, /* flags */ }, },
 	{ .name	    = "poll",	    .errmsg = true, .timeout = true, },
 	{ .name	    = "ppoll",	    .errmsg = true, .timeout = true, },
-	{ .name	    = "pread",	    .errmsg = true, .alias = "pread64", },
-	{ .name	    = "pwrite",	    .errmsg = true, .alias = "pwrite64", },
-	{ .name	    = "read",	    .errmsg = true, },
-	{ .name	    = "recvfrom",   .errmsg = true, },
+	{ .name	    = "pread",	    .errmsg = true, .alias = "pread64",
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "preadv",	    .errmsg = true, .alias = "pread",
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "prlimit64",  .errmsg = true, STRARRAY(1, resource, rlimit_resources), },
+	{ .name	    = "pwrite",	    .errmsg = true, .alias = "pwrite64",
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "pwritev",    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "read",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "readlinkat", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, }, 
+	{ .name	    = "readv",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "recvfrom",   .errmsg = true,
+	  .arg_scnprintf = { [3] = SCA_MSG_FLAGS, /* flags */ }, },
+	{ .name	    = "recvmmsg",   .errmsg = true,
+	  .arg_scnprintf = { [3] = SCA_MSG_FLAGS, /* flags */ }, },
+	{ .name	    = "recvmsg",    .errmsg = true,
+	  .arg_scnprintf = { [2] = SCA_MSG_FLAGS, /* flags */ }, },
+	{ .name	    = "renameat",   .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, }, 
+	{ .name	    = "rt_sigaction", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_SIGNUM, /* sig */ }, },
+	{ .name	    = "rt_sigprocmask",  .errmsg = true, STRARRAY(0, how, sighow), },
+	{ .name	    = "rt_sigqueueinfo", .errmsg = true,
+	  .arg_scnprintf = { [1] = SCA_SIGNUM, /* sig */ }, },
+	{ .name	    = "rt_tgsigqueueinfo", .errmsg = true,
+	  .arg_scnprintf = { [2] = SCA_SIGNUM, /* sig */ }, },
 	{ .name	    = "select",	    .errmsg = true, .timeout = true, },
-	{ .name	    = "socket",	    .errmsg = true, },
+	{ .name	    = "sendmmsg",    .errmsg = true,
+	  .arg_scnprintf = { [3] = SCA_MSG_FLAGS, /* flags */ }, },
+	{ .name	    = "sendmsg",    .errmsg = true,
+	  .arg_scnprintf = { [2] = SCA_MSG_FLAGS, /* flags */ }, },
+	{ .name	    = "sendto",	    .errmsg = true,
+	  .arg_scnprintf = { [3] = SCA_MSG_FLAGS, /* flags */ }, },
+	{ .name	    = "setitimer",  .errmsg = true, STRARRAY(0, which, itimers), },
+	{ .name	    = "setrlimit",  .errmsg = true, STRARRAY(0, resource, rlimit_resources), },
+	{ .name	    = "shutdown",   .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "socket",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_STRARRAY, /* family */
+			     [1] = SCA_SK_TYPE, /* type */ },
+	  .arg_parm	 = { [0] = &strarray__socket_families, /* family */ }, },
+	{ .name	    = "socketpair", .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_STRARRAY, /* family */
+			     [1] = SCA_SK_TYPE, /* type */ },
+	  .arg_parm	 = { [0] = &strarray__socket_families, /* family */ }, },
 	{ .name	    = "stat",	    .errmsg = true, .alias = "newstat", },
+	{ .name	    = "symlinkat",  .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, }, 
+	{ .name	    = "tgkill",	    .errmsg = true,
+	  .arg_scnprintf = { [2] = SCA_SIGNUM, /* sig */ }, },
+	{ .name	    = "tkill",	    .errmsg = true,
+	  .arg_scnprintf = { [1] = SCA_SIGNUM, /* sig */ }, },
 	{ .name	    = "uname",	    .errmsg = true, .alias = "newuname", },
+	{ .name	    = "unlinkat",   .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
+	{ .name	    = "utimensat",  .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FDAT, /* dirfd */ }, },
+	{ .name	    = "write",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
+	{ .name	    = "writev",	    .errmsg = true,
+	  .arg_scnprintf = { [0] = SCA_FD, /* fd */ }, }, 
 };
 
 static int syscall_fmt__cmp(const void *name, const void *fmtp)
@@ -364,8 +1064,8 @@
 	const char	    *name;
 	bool		    filtered;
 	struct syscall_fmt  *fmt;
-	size_t		    (**arg_scnprintf)(char *bf, size_t size,
-					      unsigned long arg, u8 arg_idx, u8 *args_mask);
+	size_t		    (**arg_scnprintf)(char *bf, size_t size, struct syscall_arg *arg);
+	void		    **arg_parm;
 };
 
 static size_t fprintf_duration(unsigned long t, FILE *fp)
@@ -389,11 +1089,24 @@
 	unsigned long	  nr_events;
 	char		  *entry_str;
 	double		  runtime_ms;
+	struct {
+		int	  max;
+		char	  **table;
+	} paths;
+
+	struct intlist *syscall_stats;
 };
 
 static struct thread_trace *thread_trace__new(void)
 {
-	return zalloc(sizeof(struct thread_trace));
+	struct thread_trace *ttrace =  zalloc(sizeof(struct thread_trace));
+
+	if (ttrace)
+		ttrace->paths.max = -1;
+
+	ttrace->syscall_stats = intlist__new(NULL);
+
+	return ttrace;
 }
 
 static struct thread_trace *thread__trace(struct thread *thread, FILE *fp)
@@ -421,26 +1134,140 @@
 
 struct trace {
 	struct perf_tool	tool;
-	int			audit_machine;
+	struct {
+		int		machine;
+		int		open_id;
+	}			audit;
 	struct {
 		int		max;
 		struct syscall  *table;
 	} syscalls;
 	struct perf_record_opts opts;
-	struct machine		host;
+	struct machine		*host;
 	u64			base_time;
+	bool			full_time;
 	FILE			*output;
 	unsigned long		nr_events;
 	struct strlist		*ev_qualifier;
 	bool			not_ev_qualifier;
+	bool			live;
+	const char 		*last_vfs_getname;
 	struct intlist		*tid_list;
 	struct intlist		*pid_list;
 	bool			sched;
 	bool			multiple_threads;
+	bool			summary;
+	bool			show_comm;
+	bool			show_tool_stats;
 	double			duration_filter;
 	double			runtime_ms;
+	struct {
+		u64		vfs_getname, proc_getname;
+	} stats;
 };
 
+static int trace__set_fd_pathname(struct thread *thread, int fd, const char *pathname)
+{
+	struct thread_trace *ttrace = thread->priv;
+
+	if (fd > ttrace->paths.max) {
+		char **npath = realloc(ttrace->paths.table, (fd + 1) * sizeof(char *));
+
+		if (npath == NULL)
+			return -1;
+
+		if (ttrace->paths.max != -1) {
+			memset(npath + ttrace->paths.max + 1, 0,
+			       (fd - ttrace->paths.max) * sizeof(char *));
+		} else {
+			memset(npath, 0, (fd + 1) * sizeof(char *));
+		}
+
+		ttrace->paths.table = npath;
+		ttrace->paths.max   = fd;
+	}
+
+	ttrace->paths.table[fd] = strdup(pathname);
+
+	return ttrace->paths.table[fd] != NULL ? 0 : -1;
+}
+
+static int thread__read_fd_path(struct thread *thread, int fd)
+{
+	char linkname[PATH_MAX], pathname[PATH_MAX];
+	struct stat st;
+	int ret;
+
+	if (thread->pid_ == thread->tid) {
+		scnprintf(linkname, sizeof(linkname),
+			  "/proc/%d/fd/%d", thread->pid_, fd);
+	} else {
+		scnprintf(linkname, sizeof(linkname),
+			  "/proc/%d/task/%d/fd/%d", thread->pid_, thread->tid, fd);
+	}
+
+	if (lstat(linkname, &st) < 0 || st.st_size + 1 > (off_t)sizeof(pathname))
+		return -1;
+
+	ret = readlink(linkname, pathname, sizeof(pathname));
+
+	if (ret < 0 || ret > st.st_size)
+		return -1;
+
+	pathname[ret] = '\0';
+	return trace__set_fd_pathname(thread, fd, pathname);
+}
+
+static const char *thread__fd_path(struct thread *thread, int fd,
+				   struct trace *trace)
+{
+	struct thread_trace *ttrace = thread->priv;
+
+	if (ttrace == NULL)
+		return NULL;
+
+	if (fd < 0)
+		return NULL;
+
+	if ((fd > ttrace->paths.max || ttrace->paths.table[fd] == NULL))
+		if (!trace->live)
+			return NULL;
+		++trace->stats.proc_getname;
+		if (thread__read_fd_path(thread, fd)) {
+			return NULL;
+	}
+
+	return ttrace->paths.table[fd];
+}
+
+static size_t syscall_arg__scnprintf_fd(char *bf, size_t size,
+					struct syscall_arg *arg)
+{
+	int fd = arg->val;
+	size_t printed = scnprintf(bf, size, "%d", fd);
+	const char *path = thread__fd_path(arg->thread, fd, arg->trace);
+
+	if (path)
+		printed += scnprintf(bf + printed, size - printed, "<%s>", path);
+
+	return printed;
+}
+
+static size_t syscall_arg__scnprintf_close_fd(char *bf, size_t size,
+					      struct syscall_arg *arg)
+{
+	int fd = arg->val;
+	size_t printed = syscall_arg__scnprintf_fd(bf, size, arg);
+	struct thread_trace *ttrace = arg->thread->priv;
+
+	if (ttrace && fd >= 0 && fd <= ttrace->paths.max) {
+		free(ttrace->paths.table[fd]);
+		ttrace->paths.table[fd] = NULL;
+	}
+
+	return printed;
+}
+
 static bool trace__filter_duration(struct trace *trace, double t)
 {
 	return t < (trace->duration_filter * NSEC_PER_MSEC);
@@ -454,10 +1281,12 @@
 }
 
 static bool done = false;
+static bool interrupted = false;
 
-static void sig_handler(int sig __maybe_unused)
+static void sig_handler(int sig)
 {
 	done = true;
+	interrupted = sig == SIGINT;
 }
 
 static size_t trace__fprintf_entry_head(struct trace *trace, struct thread *thread,
@@ -466,14 +1295,17 @@
 	size_t printed = trace__fprintf_tstamp(trace, tstamp, fp);
 	printed += fprintf_duration(duration, fp);
 
-	if (trace->multiple_threads)
+	if (trace->multiple_threads) {
+		if (trace->show_comm)
+			printed += fprintf(fp, "%.14s/", thread__comm_str(thread));
 		printed += fprintf(fp, "%d ", thread->tid);
+	}
 
 	return printed;
 }
 
 static int trace__process_event(struct trace *trace, struct machine *machine,
-				union perf_event *event)
+				union perf_event *event, struct perf_sample *sample)
 {
 	int ret = 0;
 
@@ -481,9 +1313,9 @@
 	case PERF_RECORD_LOST:
 		color_fprintf(trace->output, PERF_COLOR_RED,
 			      "LOST %" PRIu64 " events!\n", event->lost.lost);
-		ret = machine__process_lost_event(machine, event);
+		ret = machine__process_lost_event(machine, event, sample);
 	default:
-		ret = machine__process_event(machine, event);
+		ret = machine__process_event(machine, event, sample);
 		break;
 	}
 
@@ -492,11 +1324,11 @@
 
 static int trace__tool_process(struct perf_tool *tool,
 			       union perf_event *event,
-			       struct perf_sample *sample __maybe_unused,
+			       struct perf_sample *sample,
 			       struct machine *machine)
 {
 	struct trace *trace = container_of(tool, struct trace, tool);
-	return trace__process_event(trace, machine, event);
+	return trace__process_event(trace, machine, event, sample);
 }
 
 static int trace__symbols_init(struct trace *trace, struct perf_evlist *evlist)
@@ -506,16 +1338,17 @@
 	if (err)
 		return err;
 
-	machine__init(&trace->host, "", HOST_KERNEL_ID);
-	machine__create_kernel_maps(&trace->host);
+	trace->host = machine__new_host();
+	if (trace->host == NULL)
+		return -ENOMEM;
 
 	if (perf_target__has_task(&trace->opts.target)) {
 		err = perf_event__synthesize_thread_map(&trace->tool, evlist->threads,
 							trace__tool_process,
-							&trace->host);
+							trace->host);
 	} else {
 		err = perf_event__synthesize_threads(&trace->tool, trace__tool_process,
-						     &trace->host);
+						     trace->host);
 	}
 
 	if (err)
@@ -533,6 +1366,9 @@
 	if (sc->arg_scnprintf == NULL)
 		return -1;
 
+	if (sc->fmt)
+		sc->arg_parm = sc->fmt->arg_parm;
+
 	for (field = sc->tp_format->format.fields->next; field; field = field->next) {
 		if (sc->fmt && sc->fmt->arg_scnprintf[idx])
 			sc->arg_scnprintf[idx] = sc->fmt->arg_scnprintf[idx];
@@ -548,7 +1384,7 @@
 {
 	char tp_name[128];
 	struct syscall *sc;
-	const char *name = audit_syscall_to_name(id, trace->audit_machine);
+	const char *name = audit_syscall_to_name(id, trace->audit.machine);
 
 	if (name == NULL)
 		return -1;
@@ -603,32 +1439,52 @@
 }
 
 static size_t syscall__scnprintf_args(struct syscall *sc, char *bf, size_t size,
-				      unsigned long *args)
+				      unsigned long *args, struct trace *trace,
+				      struct thread *thread)
 {
-	int i = 0;
 	size_t printed = 0;
 
 	if (sc->tp_format != NULL) {
 		struct format_field *field;
-		u8 mask = 0, bit = 1;
+		u8 bit = 1;
+		struct syscall_arg arg = {
+			.idx	= 0,
+			.mask	= 0,
+			.trace  = trace,
+			.thread = thread,
+		};
 
 		for (field = sc->tp_format->format.fields->next; field;
-		     field = field->next, ++i, bit <<= 1) {
-			if (mask & bit)
+		     field = field->next, ++arg.idx, bit <<= 1) {
+			if (arg.mask & bit)
+				continue;
+			/*
+ 			 * Suppress this argument if its value is zero and
+ 			 * and we don't have a string associated in an
+ 			 * strarray for it.
+ 			 */
+			if (args[arg.idx] == 0 &&
+			    !(sc->arg_scnprintf &&
+			      sc->arg_scnprintf[arg.idx] == SCA_STRARRAY &&
+			      sc->arg_parm[arg.idx]))
 				continue;
 
 			printed += scnprintf(bf + printed, size - printed,
 					     "%s%s: ", printed ? ", " : "", field->name);
-
-			if (sc->arg_scnprintf && sc->arg_scnprintf[i]) {
-				printed += sc->arg_scnprintf[i](bf + printed, size - printed,
-								args[i], i, &mask);
+			if (sc->arg_scnprintf && sc->arg_scnprintf[arg.idx]) {
+				arg.val = args[arg.idx];
+				if (sc->arg_parm)
+					arg.parm = sc->arg_parm[arg.idx];
+				printed += sc->arg_scnprintf[arg.idx](bf + printed,
+								      size - printed, &arg);
 			} else {
 				printed += scnprintf(bf + printed, size - printed,
-						     "%ld", args[i]);
+						     "%ld", args[arg.idx]);
 			}
 		}
 	} else {
+		int i = 0;
+
 		while (i < 6) {
 			printed += scnprintf(bf + printed, size - printed,
 					     "%sarg%d: %ld",
@@ -644,10 +1500,8 @@
 				  struct perf_sample *sample);
 
 static struct syscall *trace__syscall_info(struct trace *trace,
-					   struct perf_evsel *evsel,
-					   struct perf_sample *sample)
+					   struct perf_evsel *evsel, int id)
 {
-	int id = perf_evsel__intval(evsel, sample, "id");
 
 	if (id < 0) {
 
@@ -688,6 +1542,32 @@
 	return NULL;
 }
 
+static void thread__update_stats(struct thread_trace *ttrace,
+				 int id, struct perf_sample *sample)
+{
+	struct int_node *inode;
+	struct stats *stats;
+	u64 duration = 0;
+
+	inode = intlist__findnew(ttrace->syscall_stats, id);
+	if (inode == NULL)
+		return;
+
+	stats = inode->priv;
+	if (stats == NULL) {
+		stats = malloc(sizeof(struct stats));
+		if (stats == NULL)
+			return;
+		init_stats(stats);
+		inode->priv = stats;
+	}
+
+	if (ttrace->entry_time && sample->time > ttrace->entry_time)
+		duration = sample->time - ttrace->entry_time;
+
+	update_stats(stats, duration);
+}
+
 static int trace__sys_enter(struct trace *trace, struct perf_evsel *evsel,
 			    struct perf_sample *sample)
 {
@@ -695,7 +1575,8 @@
 	void *args;
 	size_t printed = 0;
 	struct thread *thread;
-	struct syscall *sc = trace__syscall_info(trace, evsel, sample);
+	int id = perf_evsel__sc_tp_uint(evsel, id, sample);
+	struct syscall *sc = trace__syscall_info(trace, evsel, id);
 	struct thread_trace *ttrace;
 
 	if (sc == NULL)
@@ -704,18 +1585,12 @@
 	if (sc->filtered)
 		return 0;
 
-	thread = machine__findnew_thread(&trace->host, sample->pid,
-					 sample->tid);
+	thread = machine__findnew_thread(trace->host, sample->pid, sample->tid);
 	ttrace = thread__trace(thread, trace->output);
 	if (ttrace == NULL)
 		return -1;
 
-	args = perf_evsel__rawptr(evsel, sample, "args");
-	if (args == NULL) {
-		fprintf(trace->output, "Problems reading syscall arguments\n");
-		return -1;
-	}
-
+	args = perf_evsel__sc_tp_ptr(evsel, args, sample);
 	ttrace = thread->priv;
 
 	if (ttrace->entry_str == NULL) {
@@ -728,7 +1603,8 @@
 	msg = ttrace->entry_str;
 	printed += scnprintf(msg + printed, 1024 - printed, "%s(", sc->name);
 
-	printed += syscall__scnprintf_args(sc, msg + printed, 1024 - printed,  args);
+	printed += syscall__scnprintf_args(sc, msg + printed, 1024 - printed,
+					   args, trace, thread);
 
 	if (!strcmp(sc->name, "exit_group") || !strcmp(sc->name, "exit")) {
 		if (!trace->duration_filter) {
@@ -747,7 +1623,8 @@
 	int ret;
 	u64 duration = 0;
 	struct thread *thread;
-	struct syscall *sc = trace__syscall_info(trace, evsel, sample);
+	int id = perf_evsel__sc_tp_uint(evsel, id, sample);
+	struct syscall *sc = trace__syscall_info(trace, evsel, id);
 	struct thread_trace *ttrace;
 
 	if (sc == NULL)
@@ -756,13 +1633,21 @@
 	if (sc->filtered)
 		return 0;
 
-	thread = machine__findnew_thread(&trace->host, sample->pid,
-					 sample->tid);
+	thread = machine__findnew_thread(trace->host, sample->pid, sample->tid);
 	ttrace = thread__trace(thread, trace->output);
 	if (ttrace == NULL)
 		return -1;
 
-	ret = perf_evsel__intval(evsel, sample, "ret");
+	if (trace->summary)
+		thread__update_stats(ttrace, id, sample);
+
+	ret = perf_evsel__sc_tp_uint(evsel, ret, sample);
+
+	if (id == trace->audit.open_id && ret >= 0 && trace->last_vfs_getname) {
+		trace__set_fd_pathname(thread, ret, trace->last_vfs_getname);
+		trace->last_vfs_getname = NULL;
+		++trace->stats.vfs_getname;
+	}
 
 	ttrace = thread->priv;
 
@@ -808,12 +1693,19 @@
 	return 0;
 }
 
+static int trace__vfs_getname(struct trace *trace, struct perf_evsel *evsel,
+			      struct perf_sample *sample)
+{
+	trace->last_vfs_getname = perf_evsel__rawptr(evsel, sample, "pathname");
+	return 0;
+}
+
 static int trace__sched_stat_runtime(struct trace *trace, struct perf_evsel *evsel,
 				     struct perf_sample *sample)
 {
         u64 runtime = perf_evsel__intval(evsel, sample, "runtime");
 	double runtime_ms = (double)runtime / NSEC_PER_MSEC;
-	struct thread *thread = machine__findnew_thread(&trace->host,
+	struct thread *thread = machine__findnew_thread(trace->host,
 							sample->pid,
 							sample->tid);
 	struct thread_trace *ttrace = thread__trace(thread, trace->output);
@@ -856,12 +1748,12 @@
 	struct trace *trace = container_of(tool, struct trace, tool);
 	int err = 0;
 
-	tracepoint_handler handler = evsel->handler.func;
+	tracepoint_handler handler = evsel->handler;
 
 	if (skip_sample(trace, sample))
 		return 0;
 
-	if (trace->base_time == 0)
+	if (!trace->full_time && trace->base_time == 0)
 		trace->base_time = sample->time;
 
 	if (handler)
@@ -901,6 +1793,51 @@
 	return 0;
 }
 
+static int trace__record(int argc, const char **argv)
+{
+	unsigned int rec_argc, i, j;
+	const char **rec_argv;
+	const char * const record_args[] = {
+		"record",
+		"-R",
+		"-m", "1024",
+		"-c", "1",
+		"-e", "raw_syscalls:sys_enter,raw_syscalls:sys_exit",
+	};
+
+	rec_argc = ARRAY_SIZE(record_args) + argc;
+	rec_argv = calloc(rec_argc + 1, sizeof(char *));
+
+	if (rec_argv == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(record_args); i++)
+		rec_argv[i] = record_args[i];
+
+	for (j = 0; j < (unsigned int)argc; j++, i++)
+		rec_argv[i] = argv[j];
+
+	return cmd_record(i, rec_argv, NULL);
+}
+
+static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp);
+
+static void perf_evlist__add_vfs_getname(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = perf_evsel__newtp("probe", "vfs_getname",
+						     evlist->nr_entries);
+	if (evsel == NULL)
+		return;
+
+	if (perf_evsel__field(evsel, "pathname") == NULL) {
+		perf_evsel__delete(evsel);
+		return;
+	}
+
+	evsel->handler = trace__vfs_getname;
+	perf_evlist__add(evlist, evsel);
+}
+
 static int trace__run(struct trace *trace, int argc, const char **argv)
 {
 	struct perf_evlist *evlist = perf_evlist__new();
@@ -909,23 +1846,22 @@
 	unsigned long before;
 	const bool forks = argc > 0;
 
+	trace->live = true;
+
 	if (evlist == NULL) {
 		fprintf(trace->output, "Not enough memory to run!\n");
 		goto out;
 	}
 
-	if (perf_evlist__add_newtp(evlist, "raw_syscalls", "sys_enter", trace__sys_enter) ||
-	    perf_evlist__add_newtp(evlist, "raw_syscalls", "sys_exit", trace__sys_exit)) {
-		fprintf(trace->output, "Couldn't read the raw_syscalls tracepoints information!\n");
-		goto out_delete_evlist;
-	}
+	if (perf_evlist__add_syscall_newtp(evlist, trace__sys_enter, trace__sys_exit))
+		goto out_error_tp;
+
+	perf_evlist__add_vfs_getname(evlist);
 
 	if (trace->sched &&
-	    perf_evlist__add_newtp(evlist, "sched", "sched_stat_runtime",
-				   trace__sched_stat_runtime)) {
-		fprintf(trace->output, "Couldn't read the sched_stat_runtime tracepoint information!\n");
-		goto out_delete_evlist;
-	}
+		perf_evlist__add_newtp(evlist, "sched", "sched_stat_runtime",
+				trace__sched_stat_runtime))
+		goto out_error_tp;
 
 	err = perf_evlist__create_maps(evlist, &trace->opts.target);
 	if (err < 0) {
@@ -954,10 +1890,8 @@
 	}
 
 	err = perf_evlist__open(evlist);
-	if (err < 0) {
-		fprintf(trace->output, "Couldn't create the events: %s\n", strerror(errno));
-		goto out_delete_maps;
-	}
+	if (err < 0)
+		goto out_error_open;
 
 	err = perf_evlist__mmap(evlist, UINT_MAX, false);
 	if (err < 0) {
@@ -990,11 +1924,11 @@
 				goto next_event;
 			}
 
-			if (trace->base_time == 0)
+			if (!trace->full_time && trace->base_time == 0)
 				trace->base_time = sample.time;
 
 			if (type != PERF_RECORD_SAMPLE) {
-				trace__process_event(trace, &trace->host, event);
+				trace__process_event(trace, trace->host, event, &sample);
 				continue;
 			}
 
@@ -1011,29 +1945,41 @@
 				goto next_event;
 			}
 
-			handler = evsel->handler.func;
+			handler = evsel->handler;
 			handler(trace, evsel, &sample);
 next_event:
 			perf_evlist__mmap_consume(evlist, i);
 
-			if (done)
-				goto out_unmap_evlist;
+			if (interrupted)
+				goto out_disable;
 		}
 	}
 
 	if (trace->nr_events == before) {
-		if (done)
-			goto out_unmap_evlist;
+		int timeout = done ? 100 : -1;
 
-		poll(evlist->pollfd, evlist->nr_fds, -1);
+		if (poll(evlist->pollfd, evlist->nr_fds, timeout) > 0)
+			goto again;
+	} else {
+		goto again;
 	}
 
-	if (done)
-		perf_evlist__disable(evlist);
+out_disable:
+	perf_evlist__disable(evlist);
 
-	goto again;
+	if (!err) {
+		if (trace->summary)
+			trace__fprintf_thread_summary(trace, trace->output);
 
-out_unmap_evlist:
+		if (trace->show_tool_stats) {
+			fprintf(trace->output, "Stats:\n "
+					       " vfs_getname : %" PRIu64 "\n"
+					       " proc_getname: %" PRIu64 "\n",
+				trace->stats.vfs_getname,
+				trace->stats.proc_getname);
+		}
+	}
+
 	perf_evlist__munmap(evlist);
 out_close_evlist:
 	perf_evlist__close(evlist);
@@ -1042,7 +1988,22 @@
 out_delete_evlist:
 	perf_evlist__delete(evlist);
 out:
+	trace->live = false;
 	return err;
+{
+	char errbuf[BUFSIZ];
+
+out_error_tp:
+	perf_evlist__strerror_tp(evlist, errno, errbuf, sizeof(errbuf));
+	goto out_error;
+
+out_error_open:
+	perf_evlist__strerror_open(evlist, errno, errbuf, sizeof(errbuf));
+
+out_error:
+	fprintf(trace->output, "%s\n", errbuf);
+	goto out_delete_evlist;
+}
 }
 
 static int trace__replay(struct trace *trace)
@@ -1050,8 +2011,12 @@
 	const struct perf_evsel_str_handler handlers[] = {
 		{ "raw_syscalls:sys_enter",  trace__sys_enter, },
 		{ "raw_syscalls:sys_exit",   trace__sys_exit, },
+		{ "probe:vfs_getname",	     trace__vfs_getname, },
 	};
-
+	struct perf_data_file file = {
+		.path  = input_name,
+		.mode  = PERF_DATA_MODE_READ,
+	};
 	struct perf_session *session;
 	int err = -1;
 
@@ -1074,11 +2039,12 @@
 	if (symbol__init() < 0)
 		return -1;
 
-	session = perf_session__new(input_name, O_RDONLY, 0, false,
-				    &trace->tool);
+	session = perf_session__new(&file, false, &trace->tool);
 	if (session == NULL)
 		return -ENOMEM;
 
+	trace->host = &session->machines.host;
+
 	err = perf_session__set_tracepoints_handlers(session, handlers);
 	if (err)
 		goto out;
@@ -1103,6 +2069,9 @@
 	if (err)
 		pr_err("Failed to process events, error %d", err);
 
+	else if (trace->summary)
+		trace__fprintf_thread_summary(trace, trace->output);
+
 out:
 	perf_session__delete(session);
 
@@ -1113,47 +2082,111 @@
 {
 	size_t printed;
 
-	printed  = fprintf(fp, "\n _____________________________________________________________________\n");
-	printed += fprintf(fp," __)    Summary of events    (__\n\n");
-	printed += fprintf(fp,"              [ task - pid ]     [ events ] [ ratio ]  [ runtime ]\n");
-	printed += fprintf(fp," _____________________________________________________________________\n\n");
+	printed  = fprintf(fp, "\n _____________________________________________________________________________\n");
+	printed += fprintf(fp, " __)    Summary of events    (__\n\n");
+	printed += fprintf(fp, "              [ task - pid ]     [ events ] [ ratio ]  [ runtime ]\n");
+	printed += fprintf(fp, "                                  syscall  count    min     max    avg  stddev\n");
+	printed += fprintf(fp, "                                                   msec    msec   msec     %%\n");
+	printed += fprintf(fp, " _____________________________________________________________________________\n\n");
 
 	return printed;
 }
 
-static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp)
+static size_t thread__dump_stats(struct thread_trace *ttrace,
+				 struct trace *trace, FILE *fp)
 {
-	size_t printed = trace__fprintf_threads_header(fp);
-	struct rb_node *nd;
+	struct stats *stats;
+	size_t printed = 0;
+	struct syscall *sc;
+	struct int_node *inode = intlist__first(ttrace->syscall_stats);
 
-	for (nd = rb_first(&trace->host.threads); nd; nd = rb_next(nd)) {
-		struct thread *thread = rb_entry(nd, struct thread, rb_node);
-		struct thread_trace *ttrace = thread->priv;
-		const char *color;
-		double ratio;
+	if (inode == NULL)
+		return 0;
 
-		if (ttrace == NULL)
-			continue;
+	printed += fprintf(fp, "\n");
 
-		ratio = (double)ttrace->nr_events / trace->nr_events * 100.0;
+	/* each int_node is a syscall */
+	while (inode) {
+		stats = inode->priv;
+		if (stats) {
+			double min = (double)(stats->min) / NSEC_PER_MSEC;
+			double max = (double)(stats->max) / NSEC_PER_MSEC;
+			double avg = avg_stats(stats);
+			double pct;
+			u64 n = (u64) stats->n;
 
-		color = PERF_COLOR_NORMAL;
-		if (ratio > 50.0)
-			color = PERF_COLOR_RED;
-		else if (ratio > 25.0)
-			color = PERF_COLOR_GREEN;
-		else if (ratio > 5.0)
-			color = PERF_COLOR_YELLOW;
+			pct = avg ? 100.0 * stddev_stats(stats)/avg : 0.0;
+			avg /= NSEC_PER_MSEC;
 
-		printed += color_fprintf(fp, color, "%20s", thread->comm);
-		printed += fprintf(fp, " - %-5d :%11lu   [", thread->tid, ttrace->nr_events);
-		printed += color_fprintf(fp, color, "%5.1f%%", ratio);
-		printed += fprintf(fp, " ] %10.3f ms\n", ttrace->runtime_ms);
+			sc = &trace->syscalls.table[inode->i];
+			printed += fprintf(fp, "%24s  %14s : ", "", sc->name);
+			printed += fprintf(fp, "%5" PRIu64 "  %8.3f  %8.3f",
+					   n, min, max);
+			printed += fprintf(fp, "  %8.3f  %6.2f\n", avg, pct);
+		}
+
+		inode = intlist__next(inode);
 	}
 
+	printed += fprintf(fp, "\n\n");
+
 	return printed;
 }
 
+/* struct used to pass data to per-thread function */
+struct summary_data {
+	FILE *fp;
+	struct trace *trace;
+	size_t printed;
+};
+
+static int trace__fprintf_one_thread(struct thread *thread, void *priv)
+{
+	struct summary_data *data = priv;
+	FILE *fp = data->fp;
+	size_t printed = data->printed;
+	struct trace *trace = data->trace;
+	struct thread_trace *ttrace = thread->priv;
+	const char *color;
+	double ratio;
+
+	if (ttrace == NULL)
+		return 0;
+
+	ratio = (double)ttrace->nr_events / trace->nr_events * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 50.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 25.0)
+		color = PERF_COLOR_GREEN;
+	else if (ratio > 5.0)
+		color = PERF_COLOR_YELLOW;
+
+	printed += color_fprintf(fp, color, "%20s", thread__comm_str(thread));
+	printed += fprintf(fp, " - %-5d :%11lu   [", thread->tid, ttrace->nr_events);
+	printed += color_fprintf(fp, color, "%5.1f%%", ratio);
+	printed += fprintf(fp, " ] %10.3f ms\n", ttrace->runtime_ms);
+	printed += thread__dump_stats(ttrace, trace, fp);
+
+	data->printed += printed;
+
+	return 0;
+}
+
+static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp)
+{
+	struct summary_data data = {
+		.fp = fp,
+		.trace = trace
+	};
+	data.printed = trace__fprintf_threads_header(fp);
+
+	machine__for_each_thread(trace->host, trace__fprintf_one_thread, &data);
+
+	return data.printed;
+}
+
 static int trace__set_duration(const struct option *opt, const char *str,
 			       int unset __maybe_unused)
 {
@@ -1185,10 +2218,15 @@
 	const char * const trace_usage[] = {
 		"perf trace [<options>] [<command>]",
 		"perf trace [<options>] -- <command> [<options>]",
+		"perf trace record [<options>] [<command>]",
+		"perf trace record [<options>] -- <command> [<options>]",
 		NULL
 	};
 	struct trace trace = {
-		.audit_machine = audit_detect_machine(),
+		.audit = {
+			.machine = audit_detect_machine(),
+			.open_id = audit_name_to_syscall("open", trace.audit.machine),
+		},
 		.syscalls = {
 			. max = -1,
 		},
@@ -1203,10 +2241,14 @@
 			.mmap_pages    = 1024,
 		},
 		.output = stdout,
+		.show_comm = true,
 	};
 	const char *output_name = NULL;
 	const char *ev_qualifier_str = NULL;
 	const struct option trace_options[] = {
+	OPT_BOOLEAN(0, "comm", &trace.show_comm,
+		    "show the thread COMM next to its id"),
+	OPT_BOOLEAN(0, "tool_stats", &trace.show_tool_stats, "show tool stats"),
 	OPT_STRING('e', "expr", &ev_qualifier_str, "expr",
 		    "list of events to trace"),
 	OPT_STRING('o', "output", &output_name, "file", "output file name"),
@@ -1221,8 +2263,9 @@
 		    "list of cpus to monitor"),
 	OPT_BOOLEAN(0, "no-inherit", &trace.opts.no_inherit,
 		    "child tasks do not inherit counters"),
-	OPT_UINTEGER('m', "mmap-pages", &trace.opts.mmap_pages,
-		     "number of mmap data pages"),
+	OPT_CALLBACK('m', "mmap-pages", &trace.opts.mmap_pages, "pages",
+		     "number of mmap data pages",
+		     perf_evlist__parse_mmap_pages),
 	OPT_STRING('u', "uid", &trace.opts.target.uid_str, "user",
 		   "user to profile"),
 	OPT_CALLBACK(0, "duration", &trace, "float",
@@ -1230,11 +2273,18 @@
 		     trace__set_duration),
 	OPT_BOOLEAN(0, "sched", &trace.sched, "show blocking scheduler events"),
 	OPT_INCR('v', "verbose", &verbose, "be more verbose"),
+	OPT_BOOLEAN('T', "time", &trace.full_time,
+		    "Show full timestamp, not time relative to first start"),
+	OPT_BOOLEAN(0, "summary", &trace.summary,
+		    "Show syscall summary with statistics"),
 	OPT_END()
 	};
 	int err;
 	char bf[BUFSIZ];
 
+	if ((argc > 1) && (strcmp(argv[1], "record") == 0))
+		return trace__record(argc-2, &argv[2]);
+
 	argc = parse_options(argc, argv, trace_options, trace_usage, 0);
 
 	if (output_name != NULL) {
@@ -1282,9 +2332,6 @@
 	else
 		err = trace__run(&trace, argc, argv);
 
-	if (trace.sched && !err)
-		trace__fprintf_thread_summary(&trace, trace.output);
-
 out_close:
 	if (output_name != NULL)
 		fclose(trace.output);
diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile
index 5f6f9b3..58b2d37 100644
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@ -23,15 +23,17 @@
   endif
   ifeq (${IS_X86_64}, 1)
     RAW_ARCH := x86_64
-    CFLAGS += -DARCH_X86_64
+    CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT
     ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
+    LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
+  else
+    LIBUNWIND_LIBS = -lunwind -lunwind-x86
   endif
   NO_PERF_REGS := 0
-  LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
 endif
 
 ifeq ($(NO_PERF_REGS),0)
-  CFLAGS += -DHAVE_PERF_REGS
+  CFLAGS += -DHAVE_PERF_REGS_SUPPORT
 endif
 
 ifeq ($(src-perf),)
@@ -51,7 +53,6 @@
 # include ARCH specific config
 -include $(src-perf)/arch/$(ARCH)/Makefile
 
-include $(src-perf)/config/feature-tests.mak
 include $(src-perf)/config/utilities.mak
 
 ifeq ($(call get-executable,$(FLEX)),)
@@ -67,10 +68,11 @@
   CFLAGS += -Werror
 endif
 
-ifeq ("$(origin DEBUG)", "command line")
-  PERF_DEBUG = $(DEBUG)
+ifndef DEBUG
+  DEBUG := 0
 endif
-ifndef PERF_DEBUG
+
+ifeq ($(DEBUG),0)
   CFLAGS += -O6
 endif
 
@@ -89,20 +91,125 @@
 
 EXTLIBS = -lelf -lpthread -lrt -lm -ldl
 
-ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -fstack-protector-all,-fstack-protector-all),y)
+ifneq ($(OUTPUT),)
+  OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
+  $(shell mkdir -p $(OUTPUT_FEATURES))
+endif
+
+feature_check = $(eval $(feature_check_code))
+define feature_check_code
+  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS="$(LDFLAGS)" LIBUNWIND_LIBS="$(LIBUNWIND_LIBS)" -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+endef
+
+feature_set = $(eval $(feature_set_code))
+define feature_set_code
+  feature-$(1) := 1
+endef
+
+#
+# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
+#
+
+#
+# Note that this is not a complete list of all feature tests, just
+# those that are typically built on a fully configured system.
+#
+# [ Feature tests not mentioned here have to be built explicitly in
+#   the rule that uses them - an example for that is the 'bionic'
+#   feature check. ]
+#
+CORE_FEATURE_TESTS =			\
+	backtrace			\
+	dwarf				\
+	fortify-source			\
+	glibc				\
+	gtk2				\
+	gtk2-infobar			\
+	libaudit			\
+	libbfd				\
+	libelf				\
+	libelf-getphdrnum		\
+	libelf-mmap			\
+	libnuma				\
+	libperl				\
+	libpython			\
+	libpython-version		\
+	libslang			\
+	libunwind			\
+	on-exit				\
+	stackprotector			\
+	stackprotector-all
+
+#
+# So here we detect whether test-all was rebuilt, to be able
+# to skip the print-out of the long features list if the file
+# existed before and after it was built:
+#
+ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+  test-all-failed := 1
+else
+  test-all-failed := 0
+endif
+
+#
+# Special fast-path for the 'all features are available' case:
+#
+$(call feature_check,all,$(MSG))
+
+#
+# Just in case the build freshly failed, make sure we print the
+# feature matrix:
+#
+ifeq ($(feature-all), 0)
+  test-all-failed := 1
+endif
+
+ifeq ($(test-all-failed),1)
+  $(info )
+  $(info Auto-detecting system features:)
+endif
+
+ifeq ($(feature-all), 1)
+  #
+  # test-all.c passed - just set all the core feature flags to 1:
+  #
+  $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
+else
+  $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+  $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
+endif
+
+#
+# Print the result of the feature test:
+#
+feature_print = $(eval $(feature_print_code)) $(info $(MSG))
+
+define feature_print_code
+  ifeq ($(feature-$(1)), 1)
+    MSG = $(shell printf '...%30s: [ \033[32mon\033[m  ]' $(1))
+  else
+    MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
+  endif
+endef
+
+#
+# Only print out our features if we rebuilt the testcases or if a test failed:
+#
+ifeq ($(test-all-failed), 1)
+  $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_print,$(feat)))
+  $(info )
+endif
+
+ifeq ($(feature-stackprotector-all), 1)
   CFLAGS += -fstack-protector-all
 endif
 
-ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wstack-protector,-Wstack-protector),y)
+ifeq ($(feature-stackprotector), 1)
   CFLAGS += -Wstack-protector
 endif
 
-ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wvolatile-register-var,-Wvolatile-register-var),y)
-  CFLAGS += -Wvolatile-register-var
-endif
-
-ifndef PERF_DEBUG
-  ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -D_FORTIFY_SOURCE=2,-D_FORTIFY_SOURCE=2),y)
+ifeq ($(DEBUG),0)
+  ifeq ($(feature-fortify-source), 1)
     CFLAGS += -D_FORTIFY_SOURCE=2
   endif
 endif
@@ -128,84 +235,74 @@
 CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
 
 ifndef NO_BIONIC
-ifeq ($(call try-cc,$(SOURCE_BIONIC),$(CFLAGS),bionic),y)
-  BIONIC := 1
-  EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
-  EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
+  $(call feature_check,bionic)
+  ifeq ($(feature-bionic), 1)
+    BIONIC := 1
+    EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
+    EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
+  endif
 endif
-endif # NO_BIONIC
 
 ifdef NO_LIBELF
   NO_DWARF := 1
   NO_DEMANGLE := 1
   NO_LIBUNWIND := 1
 else
-FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
-ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF),libelf),y)
-  FLAGS_GLIBC=$(CFLAGS) $(LDFLAGS)
-  ifeq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC),glibc),y)
-    LIBC_SUPPORT := 1
-  endif
-  ifeq ($(BIONIC),1)
-    LIBC_SUPPORT := 1
-  endif
-  ifeq ($(LIBC_SUPPORT),1)
-    msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev);
+  ifeq ($(feature-libelf), 0)
+    ifeq ($(feature-glibc), 1)
+      LIBC_SUPPORT := 1
+    endif
+    ifeq ($(BIONIC),1)
+      LIBC_SUPPORT := 1
+    endif
+    ifeq ($(LIBC_SUPPORT),1)
+      msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev);
 
-    NO_LIBELF := 1
-    NO_DWARF := 1
-    NO_DEMANGLE := 1
+      NO_LIBELF := 1
+      NO_DWARF := 1
+      NO_DEMANGLE := 1
+    else
+      msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
+    endif
   else
-    msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
-  endif
-else
-  # for linking with debug library, run like:
-  # make DEBUG=1 LIBDW_DIR=/opt/libdw/
-  ifdef LIBDW_DIR
-    LIBDW_CFLAGS  := -I$(LIBDW_DIR)/include
-    LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
-  endif
+    # for linking with debug library, run like:
+    # make DEBUG=1 LIBDW_DIR=/opt/libdw/
+    ifdef LIBDW_DIR
+      LIBDW_CFLAGS  := -I$(LIBDW_DIR)/include
+      LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
+    endif
 
-  FLAGS_DWARF=$(CFLAGS) $(LIBDW_CFLAGS) -ldw -lz -lelf $(LIBDW_LDFLAGS) $(LDFLAGS) $(EXTLIBS)
-  ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF),libdw),y)
-    msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
-    NO_DWARF := 1
-  endif # Dwarf support
-endif # SOURCE_LIBELF
+    ifneq ($(feature-dwarf), 1)
+      msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
+      NO_DWARF := 1
+    endif # Dwarf support
+  endif # libelf support
 endif # NO_LIBELF
 
 ifndef NO_LIBELF
-CFLAGS += -DLIBELF_SUPPORT
-FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
-ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
-  CFLAGS += -DLIBELF_MMAP
-endif
-ifeq ($(call try-cc,$(SOURCE_ELF_GETPHDRNUM),$(FLAGS_LIBELF),-DHAVE_ELF_GETPHDRNUM),y)
-  CFLAGS += -DHAVE_ELF_GETPHDRNUM
-endif
+  CFLAGS += -DHAVE_LIBELF_SUPPORT
 
-# include ARCH specific config
--include $(src-perf)/arch/$(ARCH)/Makefile
+  ifeq ($(feature-libelf-mmap), 1)
+    CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
+  endif
 
-ifndef NO_DWARF
-ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
-  msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
-  NO_DWARF := 1
-else
-  CFLAGS += -DDWARF_SUPPORT $(LIBDW_CFLAGS)
-  LDFLAGS += $(LIBDW_LDFLAGS)
-  EXTLIBS += -lelf -ldw
-endif # PERF_HAVE_DWARF_REGS
-endif # NO_DWARF
+  ifeq ($(feature-libelf-getphdrnum), 1)
+    CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
+  endif
 
-endif # NO_LIBELF
+  # include ARCH specific config
+  -include $(src-perf)/arch/$(ARCH)/Makefile
 
-ifndef NO_LIBELF
-CFLAGS += -DLIBELF_SUPPORT
-FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
-ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
-  CFLAGS += -DLIBELF_MMAP
-endif # try-cc
+  ifndef NO_DWARF
+    ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
+      msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+      NO_DWARF := 1
+    else
+      CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
+      LDFLAGS += $(LIBDW_LDFLAGS)
+      EXTLIBS += -lelf -ldw
+    endif # PERF_HAVE_DWARF_REGS
+  endif # NO_DWARF
 endif # NO_LIBELF
 
 # There's only x86 (both 32 and 64) support for CFI unwind so far
@@ -214,34 +311,35 @@
 endif
 
 ifndef NO_LIBUNWIND
-# for linking with debug library, run like:
-# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
-ifdef LIBUNWIND_DIR
-  LIBUNWIND_CFLAGS  := -I$(LIBUNWIND_DIR)/include
-  LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
+  #
+  # For linking with debug library, run like:
+  #
+  #   make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
+  #
+  ifdef LIBUNWIND_DIR
+    LIBUNWIND_CFLAGS  := -I$(LIBUNWIND_DIR)/include
+    LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
+  endif
+
+  ifneq ($(feature-libunwind), 1)
+    msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99);
+    NO_LIBUNWIND := 1
+  endif
 endif
 
-FLAGS_UNWIND=$(LIBUNWIND_CFLAGS) $(CFLAGS) $(LIBUNWIND_LDFLAGS) $(LDFLAGS) $(EXTLIBS) $(LIBUNWIND_LIBS)
-ifneq ($(call try-cc,$(SOURCE_LIBUNWIND),$(FLAGS_UNWIND),libunwind),y)
-  msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99);
-  NO_LIBUNWIND := 1
-endif # Libunwind support
-endif # NO_LIBUNWIND
-
 ifndef NO_LIBUNWIND
-  CFLAGS += -DLIBUNWIND_SUPPORT
+  CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
   EXTLIBS += $(LIBUNWIND_LIBS)
   CFLAGS += $(LIBUNWIND_CFLAGS)
   LDFLAGS += $(LIBUNWIND_LDFLAGS)
-endif # NO_LIBUNWIND
+endif
 
 ifndef NO_LIBAUDIT
-  FLAGS_LIBAUDIT = $(CFLAGS) $(LDFLAGS) -laudit
-  ifneq ($(call try-cc,$(SOURCE_LIBAUDIT),$(FLAGS_LIBAUDIT),libaudit),y)
+  ifneq ($(feature-libaudit), 1)
     msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
     NO_LIBAUDIT := 1
   else
-    CFLAGS += -DLIBAUDIT_SUPPORT
+    CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
     EXTLIBS += -laudit
   endif
 endif
@@ -251,30 +349,30 @@
 endif
 
 ifndef NO_SLANG
-  FLAGS_SLANG=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -I/usr/include/slang -lslang
-  ifneq ($(call try-cc,$(SOURCE_SLANG),$(FLAGS_SLANG),libslang),y)
+  ifneq ($(feature-libslang), 1)
     msg := $(warning slang not found, disables TUI support. Please install slang-devel or libslang-dev);
     NO_SLANG := 1
   else
     # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
     CFLAGS += -I/usr/include/slang
-    CFLAGS += -DSLANG_SUPPORT
+    CFLAGS += -DHAVE_SLANG_SUPPORT
     EXTLIBS += -lslang
   endif
 endif
 
 ifndef NO_GTK2
   FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
-  ifneq ($(call try-cc,$(SOURCE_GTK2),$(FLAGS_GTK2),gtk2),y)
+  ifneq ($(feature-gtk2), 1)
     msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
     NO_GTK2 := 1
   else
-    ifeq ($(call try-cc,$(SOURCE_GTK2_INFOBAR),$(FLAGS_GTK2),-DHAVE_GTK_INFO_BAR),y)
-      CFLAGS += -DHAVE_GTK_INFO_BAR
+    ifeq ($(feature-gtk2-infobar), 1)
+      GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
     endif
-    CFLAGS += -DGTK2_SUPPORT
-    CFLAGS += $(shell pkg-config --cflags gtk+-2.0 2>/dev/null)
-    EXTLIBS += $(shell pkg-config --libs gtk+-2.0 2>/dev/null)
+    CFLAGS += -DHAVE_GTK2_SUPPORT
+    GTK_CFLAGS += $(shell pkg-config --cflags gtk+-2.0 2>/dev/null)
+    GTK_LIBS := $(shell pkg-config --libs gtk+-2.0 2>/dev/null)
+    EXTLIBS += -ldl
   endif
 endif
 
@@ -290,7 +388,7 @@
   PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
   FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
 
-  ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED),perl),y)
+  ifneq ($(feature-libperl), 1)
     CFLAGS += -DNO_LIBPERL
     NO_LIBPERL := 1
   else
@@ -299,6 +397,13 @@
   endif
 endif
 
+$(call feature_check,timerfd)
+ifeq ($(feature-timerfd), 1)
+  CFLAGS += -DHAVE_TIMERFD_SUPPORT
+else
+  msg := $(warning No timerfd support. Disables 'perf kvm stat live');
+endif
+
 disable-python = $(eval $(disable-python_code))
 define disable-python_code
   CFLAGS += -DNO_LIBPYTHON
@@ -335,11 +440,11 @@
       PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
       FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
 
-      ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED),python),y)
+      ifneq ($(feature-libpython), 1)
         $(call disable-python,Python.h (for Python 2.x))
       else
 
-        ifneq ($(call try-cc,$(SOURCE_PYTHON_VERSION),$(FLAGS_PYTHON_EMBED),python version),y)
+        ifneq ($(feature-libpython-version), 1)
           $(warning Python 3 is not yet supported; please set)
           $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
           $(warning If you also have Python 2 installed, then)
@@ -362,33 +467,30 @@
   endif
 endif
 
+ifeq ($(feature-libbfd), 1)
+  EXTLIBS += -lbfd
+endif
+
 ifdef NO_DEMANGLE
   CFLAGS += -DNO_DEMANGLE
 else
-  ifdef HAVE_CPLUS_DEMANGLE
+  ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
     EXTLIBS += -liberty
-    CFLAGS += -DHAVE_CPLUS_DEMANGLE
+    CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
   else
-    FLAGS_BFD=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -DPACKAGE='perf' -lbfd
-    has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD),libbfd)
-    ifeq ($(has_bfd),y)
-      EXTLIBS += -lbfd
-    else
-      FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty
-      has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY),liberty)
-      ifeq ($(has_bfd_iberty),y)
+    ifneq ($(feature-libbfd), 1)
+      $(call feature_check,liberty)
+      ifeq ($(feature-liberty), 1)
         EXTLIBS += -lbfd -liberty
       else
-        FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz
-        has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z),libz)
-        ifeq ($(has_bfd_iberty_z),y)
+        $(call feature_check,liberty-z)
+        ifeq ($(feature-liberty-z), 1)
           EXTLIBS += -lbfd -liberty -lz
         else
-          FLAGS_CPLUS_DEMANGLE=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -liberty
-          has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE),demangle)
-          ifeq ($(has_cplus_demangle),y)
+          $(call feature_check,cplus-demangle)
+          ifeq ($(feature-cplus-demangle), 1)
             EXTLIBS += -liberty
-            CFLAGS += -DHAVE_CPLUS_DEMANGLE
+            CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
           else
             msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
             CFLAGS += -DNO_DEMANGLE
@@ -399,31 +501,28 @@
   endif
 endif
 
-ifndef NO_STRLCPY
-  ifeq ($(call try-cc,$(SOURCE_STRLCPY),,-DHAVE_STRLCPY),y)
-    CFLAGS += -DHAVE_STRLCPY
-  endif
+ifneq ($(filter -lbfd,$(EXTLIBS)),)
+  CFLAGS += -DHAVE_LIBBFD_SUPPORT
 endif
 
 ifndef NO_ON_EXIT
-  ifeq ($(call try-cc,$(SOURCE_ON_EXIT),,-DHAVE_ON_EXIT),y)
-    CFLAGS += -DHAVE_ON_EXIT
+  ifeq ($(feature-on-exit), 1)
+    CFLAGS += -DHAVE_ON_EXIT_SUPPORT
   endif
 endif
 
 ifndef NO_BACKTRACE
-  ifeq ($(call try-cc,$(SOURCE_BACKTRACE),,-DBACKTRACE_SUPPORT),y)
-    CFLAGS += -DBACKTRACE_SUPPORT
+  ifeq ($(feature-backtrace), 1)
+    CFLAGS += -DHAVE_BACKTRACE_SUPPORT
   endif
 endif
 
 ifndef NO_LIBNUMA
-  FLAGS_LIBNUMA = $(CFLAGS) $(LDFLAGS) -lnuma
-  ifneq ($(call try-cc,$(SOURCE_LIBNUMA),$(FLAGS_LIBNUMA),libnuma),y)
+  ifeq ($(feature-libnuma), 0)
     msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numa-libs-devel or libnuma-dev);
     NO_LIBNUMA := 1
   else
-    CFLAGS += -DLIBNUMA_SUPPORT
+    CFLAGS += -DHAVE_LIBNUMA_SUPPORT
     EXTLIBS += -lnuma
   endif
 endif
@@ -459,7 +558,12 @@
 sysconfdir = $(prefix)/etc
 ETC_PERFCONFIG = etc/perfconfig
 endif
+ifeq ($(IS_X86_64),1)
+lib = lib64
+else
 lib = lib
+endif
+libdir = $(prefix)/$(lib)
 
 # Shell quote (do not use $(call) to accommodate ancient setups);
 ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
@@ -472,6 +576,7 @@
 htmldir_SQ = $(subst ','\'',$(htmldir))
 prefix_SQ = $(subst ','\'',$(prefix))
 sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
+libdir_SQ = $(subst ','\'',$(libdir))
 
 ifneq ($(filter /%,$(firstword $(perfexecdir))),)
 perfexec_instdir = $(perfexecdir)
diff --git a/tools/perf/config/feature-checks/Makefile b/tools/perf/config/feature-checks/Makefile
new file mode 100644
index 0000000..c803f17
--- /dev/null
+++ b/tools/perf/config/feature-checks/Makefile
@@ -0,0 +1,148 @@
+
+FILES=					\
+	test-all			\
+	test-backtrace			\
+	test-bionic			\
+	test-dwarf			\
+	test-fortify-source		\
+	test-glibc			\
+	test-gtk2			\
+	test-gtk2-infobar		\
+	test-hello			\
+	test-libaudit			\
+	test-libbfd			\
+	test-liberty			\
+	test-liberty-z			\
+	test-cplus-demangle		\
+	test-libelf			\
+	test-libelf-getphdrnum		\
+	test-libelf-mmap		\
+	test-libnuma			\
+	test-libperl			\
+	test-libpython			\
+	test-libpython-version		\
+	test-libslang			\
+	test-libunwind			\
+	test-on-exit			\
+	test-stackprotector-all		\
+	test-stackprotector		\
+	test-timerfd
+
+CC := $(CC) -MD
+
+all: $(FILES)
+
+BUILD = $(CC) $(CFLAGS) $(LDFLAGS) -o $(OUTPUT)$@ $@.c
+
+###############################
+
+test-all:
+	$(BUILD) -Werror -fstack-protector -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma $(LIBUNWIND_LIBS) -lelf -laudit -I/usr/include/slang -lslang $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl
+
+test-hello:
+	$(BUILD)
+
+test-stackprotector-all:
+	$(BUILD) -Werror -fstack-protector-all
+
+test-stackprotector:
+	$(BUILD) -Werror -fstack-protector -Wstack-protector
+
+test-fortify-source:
+	$(BUILD) -O2 -Werror -D_FORTIFY_SOURCE=2
+
+test-bionic:
+	$(BUILD)
+
+test-libelf:
+	$(BUILD) -lelf
+
+test-glibc:
+	$(BUILD)
+
+test-dwarf:
+	$(BUILD) -ldw
+
+test-libelf-mmap:
+	$(BUILD) -lelf
+
+test-libelf-getphdrnum:
+	$(BUILD) -lelf
+
+test-libnuma:
+	$(BUILD) -lnuma
+
+test-libunwind:
+	$(BUILD) $(LIBUNWIND_LIBS) -lelf
+
+test-libaudit:
+	$(BUILD) -laudit
+
+test-libslang:
+	$(BUILD) -I/usr/include/slang -lslang
+
+test-gtk2:
+	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+
+test-gtk2-infobar:
+	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+
+grep-libs  = $(filter -l%,$(1))
+strip-libs = $(filter-out -l%,$(1))
+
+PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
+PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
+PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
+PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
+
+test-libperl:
+	$(BUILD) $(FLAGS_PERL_EMBED)
+
+override PYTHON := python
+override PYTHON_CONFIG := python-config
+
+escape-for-shell-sq =  $(subst ','\'',$(1))
+shell-sq = '$(escape-for-shell-sq)'
+
+PYTHON_CONFIG_SQ = $(call shell-sq,$(PYTHON_CONFIG))
+
+PYTHON_EMBED_LDOPTS = $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
+PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
+PYTHON_EMBED_CCOPTS = $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+FLAGS_PYTHON_EMBED = $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+
+test-libpython:
+	$(BUILD) $(FLAGS_PYTHON_EMBED)
+
+test-libpython-version:
+	$(BUILD) $(FLAGS_PYTHON_EMBED)
+
+test-libbfd:
+	$(BUILD) -DPACKAGE='"perf"' -lbfd -ldl
+
+test-liberty:
+	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty
+
+test-liberty-z:
+	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty -lz
+
+test-cplus-demangle:
+	$(BUILD) -liberty
+
+test-on-exit:
+	$(BUILD)
+
+test-backtrace:
+	$(BUILD)
+
+test-timerfd:
+	$(BUILD)
+
+-include *.d
+
+###############################
+
+clean:
+	rm -f $(FILES) *.d
diff --git a/tools/perf/config/feature-checks/test-all.c b/tools/perf/config/feature-checks/test-all.c
new file mode 100644
index 0000000..59e7a70
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-all.c
@@ -0,0 +1,111 @@
+/*
+ * test-all.c: Try to build all the main testcases at once.
+ *
+ * A well-configured system will have all the prereqs installed, so we can speed
+ * up auto-detection on such systems.
+ */
+
+/*
+ * Quirk: Python and Perl headers cannot be in arbitrary places, so keep
+ * these 3 testcases at the top:
+ */
+#define main main_test_libpython
+# include "test-libpython.c"
+#undef main
+
+#define main main_test_libpython_version
+# include "test-libpython-version.c"
+#undef main
+
+#define main main_test_libperl
+# include "test-libperl.c"
+#undef main
+
+#define main main_test_hello
+# include "test-hello.c"
+#undef main
+
+#define main main_test_libelf
+# include "test-libelf.c"
+#undef main
+
+#define main main_test_libelf_mmap
+# include "test-libelf-mmap.c"
+#undef main
+
+#define main main_test_glibc
+# include "test-glibc.c"
+#undef main
+
+#define main main_test_dwarf
+# include "test-dwarf.c"
+#undef main
+
+#define main main_test_libelf_getphdrnum
+# include "test-libelf-getphdrnum.c"
+#undef main
+
+#define main main_test_libunwind
+# include "test-libunwind.c"
+#undef main
+
+#define main main_test_libaudit
+# include "test-libaudit.c"
+#undef main
+
+#define main main_test_libslang
+# include "test-libslang.c"
+#undef main
+
+#define main main_test_gtk2
+# include "test-gtk2.c"
+#undef main
+
+#define main main_test_gtk2_infobar
+# include "test-gtk2-infobar.c"
+#undef main
+
+#define main main_test_libbfd
+# include "test-libbfd.c"
+#undef main
+
+#define main main_test_on_exit
+# include "test-on-exit.c"
+#undef main
+
+#define main main_test_backtrace
+# include "test-backtrace.c"
+#undef main
+
+#define main main_test_libnuma
+# include "test-libnuma.c"
+#undef main
+
+#define main main_test_timerfd
+# include "test-timerfd.c"
+#undef main
+
+int main(int argc, char *argv[])
+{
+	main_test_libpython();
+	main_test_libpython_version();
+	main_test_libperl();
+	main_test_hello();
+	main_test_libelf();
+	main_test_libelf_mmap();
+	main_test_glibc();
+	main_test_dwarf();
+	main_test_libelf_getphdrnum();
+	main_test_libunwind();
+	main_test_libaudit();
+	main_test_libslang();
+	main_test_gtk2(argc, argv);
+	main_test_gtk2_infobar(argc, argv);
+	main_test_libbfd();
+	main_test_on_exit();
+	main_test_backtrace();
+	main_test_libnuma();
+	main_test_timerfd();
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-backtrace.c b/tools/perf/config/feature-checks/test-backtrace.c
new file mode 100644
index 0000000..7124aa1
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-backtrace.c
@@ -0,0 +1,13 @@
+#include <execinfo.h>
+#include <stdio.h>
+
+int main(void)
+{
+	void *backtrace_fns[10];
+	size_t entries;
+
+	entries = backtrace(backtrace_fns, 10);
+	backtrace_symbols_fd(backtrace_fns, entries, 1);
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-bionic.c b/tools/perf/config/feature-checks/test-bionic.c
new file mode 100644
index 0000000..eac24e9
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-bionic.c
@@ -0,0 +1,6 @@
+#include <android/api-level.h>
+
+int main(void)
+{
+	return __ANDROID_API__;
+}
diff --git a/tools/perf/config/feature-checks/test-cplus-demangle.c b/tools/perf/config/feature-checks/test-cplus-demangle.c
new file mode 100644
index 0000000..610c686
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-cplus-demangle.c
@@ -0,0 +1,14 @@
+extern int printf(const char *format, ...);
+extern char *cplus_demangle(const char *, int);
+
+int main(void)
+{
+	char symbol[4096] = "FieldName__9ClassNameFd";
+	char *tmp;
+
+	tmp = cplus_demangle(symbol, 0);
+
+	printf("demangled symbol: {%s}\n", tmp);
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-dwarf.c b/tools/perf/config/feature-checks/test-dwarf.c
new file mode 100644
index 0000000..3fc1801
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-dwarf.c
@@ -0,0 +1,10 @@
+#include <dwarf.h>
+#include <elfutils/libdw.h>
+#include <elfutils/version.h>
+
+int main(void)
+{
+	Dwarf *dbg = dwarf_begin(0, DWARF_C_READ);
+
+	return (long)dbg;
+}
diff --git a/tools/perf/config/feature-checks/test-fortify-source.c b/tools/perf/config/feature-checks/test-fortify-source.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-fortify-source.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+	return puts("hi");
+}
diff --git a/tools/perf/config/feature-checks/test-glibc.c b/tools/perf/config/feature-checks/test-glibc.c
new file mode 100644
index 0000000..b082034
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-glibc.c
@@ -0,0 +1,8 @@
+#include <gnu/libc-version.h>
+
+int main(void)
+{
+	const char *version = gnu_get_libc_version();
+
+	return (long)version;
+}
diff --git a/tools/perf/config/feature-checks/test-gtk2-infobar.c b/tools/perf/config/feature-checks/test-gtk2-infobar.c
new file mode 100644
index 0000000..397b464
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-gtk2-infobar.c
@@ -0,0 +1,11 @@
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#include <gtk/gtk.h>
+#pragma GCC diagnostic error "-Wstrict-prototypes"
+
+int main(int argc, char *argv[])
+{
+	gtk_init(&argc, &argv);
+	gtk_info_bar_new();
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-gtk2.c b/tools/perf/config/feature-checks/test-gtk2.c
new file mode 100644
index 0000000..6bd80e5
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-gtk2.c
@@ -0,0 +1,10 @@
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#include <gtk/gtk.h>
+#pragma GCC diagnostic error "-Wstrict-prototypes"
+
+int main(int argc, char *argv[])
+{
+	gtk_init(&argc, &argv);
+
+        return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-hello.c b/tools/perf/config/feature-checks/test-hello.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-hello.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+	return puts("hi");
+}
diff --git a/tools/perf/config/feature-checks/test-libaudit.c b/tools/perf/config/feature-checks/test-libaudit.c
new file mode 100644
index 0000000..afc019f
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libaudit.c
@@ -0,0 +1,10 @@
+#include <libaudit.h>
+
+extern int printf(const char *format, ...);
+
+int main(void)
+{
+	printf("error message: %s\n", audit_errno_to_name(0));
+
+	return audit_open();
+}
diff --git a/tools/perf/config/feature-checks/test-libbfd.c b/tools/perf/config/feature-checks/test-libbfd.c
new file mode 100644
index 0000000..2405990
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libbfd.c
@@ -0,0 +1,15 @@
+#include <bfd.h>
+
+extern int printf(const char *format, ...);
+
+int main(void)
+{
+	char symbol[4096] = "FieldName__9ClassNameFd";
+	char *tmp;
+
+	tmp = bfd_demangle(0, symbol, 0);
+
+	printf("demangled symbol: {%s}\n", tmp);
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-libelf-getphdrnum.c b/tools/perf/config/feature-checks/test-libelf-getphdrnum.c
new file mode 100644
index 0000000..d710459
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libelf-getphdrnum.c
@@ -0,0 +1,8 @@
+#include <libelf.h>
+
+int main(void)
+{
+	size_t dst;
+
+	return elf_getphdrnum(0, &dst);
+}
diff --git a/tools/perf/config/feature-checks/test-libelf-mmap.c b/tools/perf/config/feature-checks/test-libelf-mmap.c
new file mode 100644
index 0000000..564427d
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libelf-mmap.c
@@ -0,0 +1,8 @@
+#include <libelf.h>
+
+int main(void)
+{
+	Elf *elf = elf_begin(0, ELF_C_READ_MMAP, 0);
+
+	return (long)elf;
+}
diff --git a/tools/perf/config/feature-checks/test-libelf.c b/tools/perf/config/feature-checks/test-libelf.c
new file mode 100644
index 0000000..08db322
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libelf.c
@@ -0,0 +1,8 @@
+#include <libelf.h>
+
+int main(void)
+{
+	Elf *elf = elf_begin(0, ELF_C_READ, 0);
+
+	return (long)elf;
+}
diff --git a/tools/perf/config/feature-checks/test-libnuma.c b/tools/perf/config/feature-checks/test-libnuma.c
new file mode 100644
index 0000000..4763d9c
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libnuma.c
@@ -0,0 +1,9 @@
+#include <numa.h>
+#include <numaif.h>
+
+int main(void)
+{
+	numa_available();
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-libperl.c b/tools/perf/config/feature-checks/test-libperl.c
new file mode 100644
index 0000000..8871f6a
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libperl.c
@@ -0,0 +1,9 @@
+#include <EXTERN.h>
+#include <perl.h>
+
+int main(void)
+{
+	perl_alloc();
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-libpython-version.c b/tools/perf/config/feature-checks/test-libpython-version.c
new file mode 100644
index 0000000..facea12
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libpython-version.c
@@ -0,0 +1,10 @@
+#include <Python.h>
+
+#if PY_VERSION_HEX >= 0x03000000
+	#error
+#endif
+
+int main(void)
+{
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-libpython.c b/tools/perf/config/feature-checks/test-libpython.c
new file mode 100644
index 0000000..b24b28a
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libpython.c
@@ -0,0 +1,8 @@
+#include <Python.h>
+
+int main(void)
+{
+	Py_Initialize();
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-libslang.c b/tools/perf/config/feature-checks/test-libslang.c
new file mode 100644
index 0000000..22ff22e
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libslang.c
@@ -0,0 +1,6 @@
+#include <slang.h>
+
+int main(void)
+{
+	return SLsmg_init_smg();
+}
diff --git a/tools/perf/config/feature-checks/test-libunwind.c b/tools/perf/config/feature-checks/test-libunwind.c
new file mode 100644
index 0000000..43b9369
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libunwind.c
@@ -0,0 +1,27 @@
+#include <libunwind.h>
+#include <stdlib.h>
+
+extern int UNW_OBJ(dwarf_search_unwind_table) (unw_addr_space_t as,
+                                      unw_word_t ip,
+                                      unw_dyn_info_t *di,
+                                      unw_proc_info_t *pi,
+                                      int need_unwind_info, void *arg);
+
+
+#define dwarf_search_unwind_table UNW_OBJ(dwarf_search_unwind_table)
+
+static unw_accessors_t accessors;
+
+int main(void)
+{
+	unw_addr_space_t addr_space;
+
+	addr_space = unw_create_addr_space(&accessors, 0);
+	if (addr_space)
+		return 0;
+
+	unw_init_remote(NULL, addr_space, NULL);
+	dwarf_search_unwind_table(addr_space, 0, NULL, NULL, 0, NULL);
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-on-exit.c b/tools/perf/config/feature-checks/test-on-exit.c
new file mode 100644
index 0000000..8e88b16
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-on-exit.c
@@ -0,0 +1,16 @@
+#include <stdio.h>
+#include <stdlib.h>
+
+static void exit_fn(int status, void *__data)
+{
+	printf("exit status: %d, data: %d\n", status, *(int *)__data);
+}
+
+static int data = 123;
+
+int main(void)
+{
+	on_exit(exit_fn, &data);
+
+	return 321;
+}
diff --git a/tools/perf/config/feature-checks/test-stackprotector-all.c b/tools/perf/config/feature-checks/test-stackprotector-all.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-stackprotector-all.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+	return puts("hi");
+}
diff --git a/tools/perf/config/feature-checks/test-stackprotector.c b/tools/perf/config/feature-checks/test-stackprotector.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-stackprotector.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+	return puts("hi");
+}
diff --git a/tools/perf/config/feature-checks/test-timerfd.c b/tools/perf/config/feature-checks/test-timerfd.c
new file mode 100644
index 0000000..8c5c083
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-timerfd.c
@@ -0,0 +1,18 @@
+/*
+ * test for timerfd functions used by perf-kvm-stat-live
+ */
+#include <sys/timerfd.h>
+
+int main(void)
+{
+	struct itimerspec new_value;
+
+	int fd = timerfd_create(CLOCK_MONOTONIC, TFD_NONBLOCK);
+	if (fd < 0)
+		return 1;
+
+	if (timerfd_settime(fd, 0, &new_value, NULL) != 0)
+		return 1;
+
+	return 0;
+}
diff --git a/tools/perf/config/feature-checks/test-volatile-register-var.c b/tools/perf/config/feature-checks/test-volatile-register-var.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-volatile-register-var.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+	return puts("hi");
+}
diff --git a/tools/perf/config/feature-tests.mak b/tools/perf/config/feature-tests.mak
deleted file mode 100644
index f793057..0000000
--- a/tools/perf/config/feature-tests.mak
+++ /dev/null
@@ -1,246 +0,0 @@
-define SOURCE_HELLO
-#include <stdio.h>
-int main(void)
-{
-	return puts(\"hi\");
-}
-endef
-
-ifndef NO_DWARF
-define SOURCE_DWARF
-#include <dwarf.h>
-#include <elfutils/libdw.h>
-#include <elfutils/version.h>
-#ifndef _ELFUTILS_PREREQ
-#error
-#endif
-
-int main(void)
-{
-	Dwarf *dbg = dwarf_begin(0, DWARF_C_READ);
-	return (long)dbg;
-}
-endef
-endif
-
-define SOURCE_LIBELF
-#include <libelf.h>
-
-int main(void)
-{
-	Elf *elf = elf_begin(0, ELF_C_READ, 0);
-	return (long)elf;
-}
-endef
-
-define SOURCE_GLIBC
-#include <gnu/libc-version.h>
-
-int main(void)
-{
-	const char *version = gnu_get_libc_version();
-	return (long)version;
-}
-endef
-
-define SOURCE_BIONIC
-#include <android/api-level.h>
-
-int main(void)
-{
-	return __ANDROID_API__;
-}
-endef
-
-define SOURCE_ELF_MMAP
-#include <libelf.h>
-int main(void)
-{
-	Elf *elf = elf_begin(0, ELF_C_READ_MMAP, 0);
-	return (long)elf;
-}
-endef
-
-define SOURCE_ELF_GETPHDRNUM
-#include <libelf.h>
-int main(void)
-{
-	size_t dst;
-	return elf_getphdrnum(0, &dst);
-}
-endef
-
-ifndef NO_SLANG
-define SOURCE_SLANG
-#include <slang.h>
-
-int main(void)
-{
-	return SLsmg_init_smg();
-}
-endef
-endif
-
-ifndef NO_GTK2
-define SOURCE_GTK2
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#include <gtk/gtk.h>
-#pragma GCC diagnostic error \"-Wstrict-prototypes\"
-
-int main(int argc, char *argv[])
-{
-        gtk_init(&argc, &argv);
-
-        return 0;
-}
-endef
-
-define SOURCE_GTK2_INFOBAR
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#include <gtk/gtk.h>
-#pragma GCC diagnostic error \"-Wstrict-prototypes\"
-
-int main(void)
-{
-	gtk_info_bar_new();
-
-	return 0;
-}
-endef
-endif
-
-ifndef NO_LIBPERL
-define SOURCE_PERL_EMBED
-#include <EXTERN.h>
-#include <perl.h>
-
-int main(void)
-{
-perl_alloc();
-return 0;
-}
-endef
-endif
-
-ifndef NO_LIBPYTHON
-define SOURCE_PYTHON_VERSION
-#include <Python.h>
-#if PY_VERSION_HEX >= 0x03000000
-	#error
-#endif
-int main(void)
-{
-	return 0;
-}
-endef
-define SOURCE_PYTHON_EMBED
-#include <Python.h>
-int main(void)
-{
-	Py_Initialize();
-	return 0;
-}
-endef
-endif
-
-define SOURCE_BFD
-#include <bfd.h>
-
-int main(void)
-{
-	bfd_demangle(0, 0, 0);
-	return 0;
-}
-endef
-
-define SOURCE_CPLUS_DEMANGLE
-extern char *cplus_demangle(const char *, int);
-
-int main(void)
-{
-	cplus_demangle(0, 0);
-	return 0;
-}
-endef
-
-define SOURCE_STRLCPY
-#include <stdlib.h>
-extern size_t strlcpy(char *dest, const char *src, size_t size);
-
-int main(void)
-{
-	strlcpy(NULL, NULL, 0);
-	return 0;
-}
-endef
-
-ifndef NO_LIBUNWIND
-define SOURCE_LIBUNWIND
-#include <libunwind.h>
-#include <stdlib.h>
-
-extern int UNW_OBJ(dwarf_search_unwind_table) (unw_addr_space_t as,
-                                      unw_word_t ip,
-                                      unw_dyn_info_t *di,
-                                      unw_proc_info_t *pi,
-                                      int need_unwind_info, void *arg);
-
-
-#define dwarf_search_unwind_table UNW_OBJ(dwarf_search_unwind_table)
-
-int main(void)
-{
-	unw_addr_space_t addr_space;
-	addr_space = unw_create_addr_space(NULL, 0);
-	unw_init_remote(NULL, addr_space, NULL);
-	dwarf_search_unwind_table(addr_space, 0, NULL, NULL, 0, NULL);
-	return 0;
-}
-endef
-endif
-
-ifndef NO_BACKTRACE
-define SOURCE_BACKTRACE
-#include <execinfo.h>
-#include <stdio.h>
-
-int main(void)
-{
-	backtrace(NULL, 0);
-	backtrace_symbols(NULL, 0);
-	return 0;
-}
-endef
-endif
-
-ifndef NO_LIBAUDIT
-define SOURCE_LIBAUDIT
-#include <libaudit.h>
-
-int main(void)
-{
-	printf(\"error message: %s\", audit_errno_to_name(0));
-	return audit_open();
-}
-endef
-endif
-
-define SOURCE_ON_EXIT
-#include <stdio.h>
-
-int main(void)
-{
-	return on_exit(NULL, NULL);
-}
-endef
-
-define SOURCE_LIBNUMA
-#include <numa.h>
-#include <numaif.h>
-
-int main(void)
-{
-	numa_available();
-	return 0;
-}
-endef
diff --git a/tools/perf/config/utilities.mak b/tools/perf/config/utilities.mak
index 94d2d4f..f168deb 100644
--- a/tools/perf/config/utilities.mak
+++ b/tools/perf/config/utilities.mak
@@ -179,16 +179,9 @@
 _gea_warn = $(warning The path '$(1)' is not executable.)
 _gea_err  = $(if $(1),$(error Please set '$(1)' appropriately))
 
-# try-cc
-# Usage: option = $(call try-cc, source-to-build, cc-options, msg)
-ifneq ($(V),1)
-TRY_CC_OUTPUT= > /dev/null 2>&1
+ifneq ($(findstring $(MAKEFLAGS),s),s)
+  ifneq ($(V),1)
+    QUIET_CLEAN		= @printf '  CLEAN    %s\n' $1;
+    QUIET_INSTALL	= @printf '  INSTALL  %s\n' $1;
+  endif
 endif
-TRY_CC_MSG=echo "    CHK $(3)" 1>&2;
-
-try-cc = $(shell sh -c						  \
-	'TMP="$(OUTPUT)$(TMPOUT).$$$$";				  \
-	 $(TRY_CC_MSG)						  \
-	 echo "$(1)" |						  \
-	 $(CC) -x c - $(2) -o "$$TMP" $(TRY_CC_OUTPUT) && echo y; \
-	 rm -f "$$TMP"')
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 85e1aed..8b38b4e 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -49,14 +49,14 @@
 	{ "version",	cmd_version,	0 },
 	{ "script",	cmd_script,	0 },
 	{ "sched",	cmd_sched,	0 },
-#ifdef LIBELF_SUPPORT
+#ifdef HAVE_LIBELF_SUPPORT
 	{ "probe",	cmd_probe,	0 },
 #endif
 	{ "kmem",	cmd_kmem,	0 },
 	{ "lock",	cmd_lock,	0 },
 	{ "kvm",	cmd_kvm,	0 },
 	{ "test",	cmd_test,	0 },
-#ifdef LIBAUDIT_SUPPORT
+#ifdef HAVE_LIBAUDIT_SUPPORT
 	{ "trace",	cmd_trace,	0 },
 #endif
 	{ "inject",	cmd_inject,	0 },
@@ -456,6 +456,7 @@
 {
 	const char *cmd;
 
+	/* The page_size is placed in util object. */
 	page_size = sysconf(_SC_PAGE_SIZE);
 
 	cmd = perf_extract_argv0_path(argv[0]);
@@ -480,7 +481,14 @@
 		fprintf(stderr, "cannot handle %s internally", cmd);
 		goto out;
 	}
-
+#ifdef HAVE_LIBAUDIT_SUPPORT
+	if (!prefixcmp(cmd, "trace")) {
+		set_buildid_dir();
+		setup_path();
+		argv[0] = "trace";
+		return cmd_trace(argc, argv, NULL);
+	}
+#endif
 	/* Look for flags.. */
 	argv++;
 	argc--;
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index cf20187..6a587e84 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -4,6 +4,8 @@
 #include <asm/unistd.h>
 
 #if defined(__i386__)
+#define mb()		asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
+#define wmb()		asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
 #define rmb()		asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
 #define cpu_relax()	asm volatile("rep; nop" ::: "memory");
 #define CPUINFO_PROC	"model name"
@@ -13,6 +15,8 @@
 #endif
 
 #if defined(__x86_64__)
+#define mb()		asm volatile("mfence" ::: "memory")
+#define wmb()		asm volatile("sfence" ::: "memory")
 #define rmb()		asm volatile("lfence" ::: "memory")
 #define cpu_relax()	asm volatile("rep; nop" ::: "memory");
 #define CPUINFO_PROC	"model name"
@@ -23,45 +27,61 @@
 
 #ifdef __powerpc__
 #include "../../arch/powerpc/include/uapi/asm/unistd.h"
+#define mb()		asm volatile ("sync" ::: "memory")
+#define wmb()		asm volatile ("sync" ::: "memory")
 #define rmb()		asm volatile ("sync" ::: "memory")
-#define cpu_relax()	asm volatile ("" ::: "memory");
 #define CPUINFO_PROC	"cpu"
 #endif
 
 #ifdef __s390__
+#define mb()		asm volatile("bcr 15,0" ::: "memory")
+#define wmb()		asm volatile("bcr 15,0" ::: "memory")
 #define rmb()		asm volatile("bcr 15,0" ::: "memory")
-#define cpu_relax()	asm volatile("" ::: "memory");
 #endif
 
 #ifdef __sh__
 #if defined(__SH4A__) || defined(__SH5__)
+# define mb()		asm volatile("synco" ::: "memory")
+# define wmb()		asm volatile("synco" ::: "memory")
 # define rmb()		asm volatile("synco" ::: "memory")
 #else
+# define mb()		asm volatile("" ::: "memory")
+# define wmb()		asm volatile("" ::: "memory")
 # define rmb()		asm volatile("" ::: "memory")
 #endif
-#define cpu_relax()	asm volatile("" ::: "memory")
 #define CPUINFO_PROC	"cpu type"
 #endif
 
 #ifdef __hppa__
+#define mb()		asm volatile("" ::: "memory")
+#define wmb()		asm volatile("" ::: "memory")
 #define rmb()		asm volatile("" ::: "memory")
-#define cpu_relax()	asm volatile("" ::: "memory");
 #define CPUINFO_PROC	"cpu"
 #endif
 
 #ifdef __sparc__
+#ifdef __LP64__
+#define mb()		asm volatile("ba,pt %%xcc, 1f\n"	\
+				     "membar #StoreLoad\n"	\
+				     "1:\n":::"memory")
+#else
+#define mb()		asm volatile("":::"memory")
+#endif
+#define wmb()		asm volatile("":::"memory")
 #define rmb()		asm volatile("":::"memory")
-#define cpu_relax()	asm volatile("":::"memory")
 #define CPUINFO_PROC	"cpu"
 #endif
 
 #ifdef __alpha__
+#define mb()		asm volatile("mb" ::: "memory")
+#define wmb()		asm volatile("wmb" ::: "memory")
 #define rmb()		asm volatile("mb" ::: "memory")
-#define cpu_relax()	asm volatile("" ::: "memory")
 #define CPUINFO_PROC	"cpu model"
 #endif
 
 #ifdef __ia64__
+#define mb()		asm volatile ("mf" ::: "memory")
+#define wmb()		asm volatile ("mf" ::: "memory")
 #define rmb()		asm volatile ("mf" ::: "memory")
 #define cpu_relax()	asm volatile ("hint @pause" ::: "memory")
 #define CPUINFO_PROC	"model name"
@@ -72,40 +92,55 @@
  * Use the __kuser_memory_barrier helper in the CPU helper page. See
  * arch/arm/kernel/entry-armv.S in the kernel source for details.
  */
+#define mb()		((void(*)(void))0xffff0fa0)()
+#define wmb()		((void(*)(void))0xffff0fa0)()
 #define rmb()		((void(*)(void))0xffff0fa0)()
-#define cpu_relax()	asm volatile("":::"memory")
 #define CPUINFO_PROC	"Processor"
 #endif
 
 #ifdef __aarch64__
-#define rmb()		asm volatile("dmb ld" ::: "memory")
+#define mb()		asm volatile("dmb ish" ::: "memory")
+#define wmb()		asm volatile("dmb ishld" ::: "memory")
+#define rmb()		asm volatile("dmb ishst" ::: "memory")
 #define cpu_relax()	asm volatile("yield" ::: "memory")
 #endif
 
 #ifdef __mips__
-#define rmb()		asm volatile(					\
+#define mb()		asm volatile(					\
 				".set	mips2\n\t"			\
 				"sync\n\t"				\
 				".set	mips0"				\
 				: /* no output */			\
 				: /* no input */			\
 				: "memory")
-#define cpu_relax()	asm volatile("" ::: "memory")
+#define wmb()	mb()
+#define rmb()	mb()
 #define CPUINFO_PROC	"cpu model"
 #endif
 
 #ifdef __arc__
+#define mb()		asm volatile("" ::: "memory")
+#define wmb()		asm volatile("" ::: "memory")
 #define rmb()		asm volatile("" ::: "memory")
-#define cpu_relax()	rmb()
 #define CPUINFO_PROC	"Processor"
 #endif
 
 #ifdef __metag__
+#define mb()		asm volatile("" ::: "memory")
+#define wmb()		asm volatile("" ::: "memory")
 #define rmb()		asm volatile("" ::: "memory")
-#define cpu_relax()	asm volatile("" ::: "memory")
 #define CPUINFO_PROC	"CPU"
 #endif
 
+#define barrier() asm volatile ("" ::: "memory")
+
+#ifndef cpu_relax
+#define cpu_relax() barrier()
+#endif
+
+#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
+
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>
@@ -182,7 +217,9 @@
 struct branch_flags {
 	u64 mispred:1;
 	u64 predicted:1;
-	u64 reserved:62;
+	u64 in_tx:1;
+	u64 abort:1;
+	u64 reserved:60;
 };
 
 struct branch_entry {
@@ -218,7 +255,6 @@
 	bool	     no_delay;
 	bool	     no_inherit;
 	bool	     no_samples;
-	bool	     pipe_output;
 	bool	     raw_samples;
 	bool	     sample_address;
 	bool	     sample_weight;
@@ -231,6 +267,7 @@
 	u64	     default_interval;
 	u64	     user_interval;
 	u16	     stack_dump_size;
+	bool	     sample_transaction;
 };
 
 #endif
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/Context.c b/tools/perf/scripts/python/Perf-Trace-Util/Context.c
index 315067b..fcd1dd6 100644
--- a/tools/perf/scripts/python/Perf-Trace-Util/Context.c
+++ b/tools/perf/scripts/python/Perf-Trace-Util/Context.c
@@ -25,7 +25,7 @@
 
 PyMODINIT_FUNC initperf_trace_context(void);
 
-static PyObject *perf_trace_context_common_pc(PyObject *self, PyObject *args)
+static PyObject *perf_trace_context_common_pc(PyObject *obj, PyObject *args)
 {
 	static struct scripting_context *scripting_context;
 	PyObject *context;
@@ -40,7 +40,7 @@
 	return Py_BuildValue("i", retval);
 }
 
-static PyObject *perf_trace_context_common_flags(PyObject *self,
+static PyObject *perf_trace_context_common_flags(PyObject *obj,
 						 PyObject *args)
 {
 	static struct scripting_context *scripting_context;
@@ -56,7 +56,7 @@
 	return Py_BuildValue("i", retval);
 }
 
-static PyObject *perf_trace_context_common_lock_depth(PyObject *self,
+static PyObject *perf_trace_context_common_lock_depth(PyObject *obj,
 						      PyObject *args)
 {
 	static struct scripting_context *scripting_context;
diff --git a/tools/perf/tests/attr/README b/tools/perf/tests/attr/README
index d102957..430024f 100644
--- a/tools/perf/tests/attr/README
+++ b/tools/perf/tests/attr/README
@@ -44,9 +44,9 @@
   perf record -c 123 kill                       (test-record-count)
   perf record -d kill                           (test-record-data)
   perf record -F 100 kill                       (test-record-freq)
-  perf record -g -- kill                        (test-record-graph-default)
-  perf record -g dwarf -- kill                  (test-record-graph-dwarf)
-  perf record -g fp kill                        (test-record-graph-fp)
+  perf record -g kill                           (test-record-graph-default)
+  perf record --call-graph dwarf kill		(test-record-graph-dwarf)
+  perf record --call-graph fp kill              (test-record-graph-fp)
   perf record --group -e cycles,instructions kill (test-record-group)
   perf record -e '{cycles,instructions}' kill   (test-record-group1)
   perf record -D kill                           (test-record-no-delay)
diff --git a/tools/perf/tests/attr/test-record-graph-default b/tools/perf/tests/attr/test-record-graph-default
index 833d184..853597a 100644
--- a/tools/perf/tests/attr/test-record-graph-default
+++ b/tools/perf/tests/attr/test-record-graph-default
@@ -1,6 +1,6 @@
 [config]
 command = record
-args    = -g -- kill >/dev/null 2>&1
+args    = -g kill >/dev/null 2>&1
 
 [event:base-record]
 sample_type=295
diff --git a/tools/perf/tests/attr/test-record-graph-dwarf b/tools/perf/tests/attr/test-record-graph-dwarf
index e93e082..d6f324e 100644
--- a/tools/perf/tests/attr/test-record-graph-dwarf
+++ b/tools/perf/tests/attr/test-record-graph-dwarf
@@ -1,6 +1,6 @@
 [config]
 command = record
-args    = -g dwarf -- kill >/dev/null 2>&1
+args    = --call-graph dwarf -- kill >/dev/null 2>&1
 
 [event:base-record]
 sample_type=12583
diff --git a/tools/perf/tests/attr/test-record-graph-fp b/tools/perf/tests/attr/test-record-graph-fp
index 7cef374..055e3be 100644
--- a/tools/perf/tests/attr/test-record-graph-fp
+++ b/tools/perf/tests/attr/test-record-graph-fp
@@ -1,6 +1,6 @@
 [config]
 command = record
-args    = -g fp kill >/dev/null 2>&1
+args    = --call-graph fp kill >/dev/null 2>&1
 
 [event:base-record]
 sample_type=295
diff --git a/tools/perf/tests/code-reading.c b/tools/perf/tests/code-reading.c
index e3fedfa..49ccc3b 100644
--- a/tools/perf/tests/code-reading.c
+++ b/tools/perf/tests/code-reading.c
@@ -276,7 +276,7 @@
 		return process_sample_event(machine, evlist, event, state);
 
 	if (event->header.type < PERF_RECORD_MAX)
-		return machine__process_event(machine, event);
+		return machine__process_event(machine, event, NULL);
 
 	return 0;
 }
diff --git a/tools/perf/tests/dso-data.c b/tools/perf/tests/dso-data.c
index dffe055..9cc81a3 100644
--- a/tools/perf/tests/dso-data.c
+++ b/tools/perf/tests/dso-data.c
@@ -35,6 +35,7 @@
 	if (size != write(fd, buf, size))
 		templ = NULL;
 
+	free(buf);
 	close(fd);
 	return templ;
 }
diff --git a/tools/perf/tests/hists_link.c b/tools/perf/tests/hists_link.c
index 4228ffc..173bf42 100644
--- a/tools/perf/tests/hists_link.c
+++ b/tools/perf/tests/hists_link.c
@@ -93,7 +93,7 @@
 		if (thread == NULL)
 			goto out;
 
-		thread__set_comm(thread, fake_threads[i].comm);
+		thread__set_comm(thread, fake_threads[i].comm, 0);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(fake_mmap_info); i++) {
@@ -110,7 +110,7 @@
 		strcpy(fake_mmap_event.mmap.filename,
 		       fake_mmap_info[i].filename);
 
-		machine__process_mmap_event(machine, &fake_mmap_event);
+		machine__process_mmap_event(machine, &fake_mmap_event, NULL);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(fake_symbols); i++) {
@@ -222,7 +222,8 @@
 							  &sample) < 0)
 				goto out;
 
-			he = __hists__add_entry(&evsel->hists, &al, NULL, 1, 1);
+			he = __hists__add_entry(&evsel->hists, &al, NULL,
+						NULL, NULL, 1, 1, 0);
 			if (he == NULL)
 				goto out;
 
@@ -244,7 +245,8 @@
 							  &sample) < 0)
 				goto out;
 
-			he = __hists__add_entry(&evsel->hists, &al, NULL, 1, 1);
+			he = __hists__add_entry(&evsel->hists, &al, NULL,
+						NULL, NULL, 1, 1, 0);
 			if (he == NULL)
 				goto out;
 
@@ -419,7 +421,7 @@
 		he = rb_entry(node, struct hist_entry, rb_node_in);
 
 		pr_info("%2d: entry: %-8s [%-8s] %20s: period = %"PRIu64"\n",
-			i, he->thread->comm, he->ms.map->dso->short_name,
+			i, thread__comm_str(he->thread), he->ms.map->dso->short_name,
 			he->ms.sym->name, he->stat.period);
 
 		i++;
@@ -465,7 +467,7 @@
 		goto out;
 
 	list_for_each_entry(evsel, &evlist->entries, node) {
-		hists__collapse_resort(&evsel->hists);
+		hists__collapse_resort(&evsel->hists, NULL);
 
 		if (verbose > 2)
 			print_hists(&evsel->hists);
diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 48114d1..ef671cd 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -2,7 +2,7 @@
 #include "parse-events.h"
 #include "evsel.h"
 #include "evlist.h"
-#include "sysfs.h"
+#include "fs.h"
 #include <lk/debugfs.h>
 #include "tests.h"
 #include <linux/hw_breakpoint.h>
@@ -1456,7 +1456,7 @@
 	int ret;
 
 	snprintf(path, PATH_MAX, "%s/bus/event_source/devices/cpu/format/",
-		 sysfs_find_mountpoint());
+		 sysfs__mountpoint());
 
 	ret = stat(path, &st);
 	if (ret)
@@ -1473,7 +1473,7 @@
 	int ret;
 
 	snprintf(path, PATH_MAX, "%s/bus/event_source/devices/cpu/events/",
-		 sysfs_find_mountpoint());
+		 sysfs__mountpoint());
 
 	ret = stat(path, &st);
 	if (ret) {
diff --git a/tools/perf/tests/perf-record.c b/tools/perf/tests/perf-record.c
index 7923b06..93a62b0 100644
--- a/tools/perf/tests/perf-record.c
+++ b/tools/perf/tests/perf-record.c
@@ -45,7 +45,7 @@
 	};
 	cpu_set_t cpu_mask;
 	size_t cpu_mask_size = sizeof(cpu_mask);
-	struct perf_evlist *evlist = perf_evlist__new();
+	struct perf_evlist *evlist = perf_evlist__new_default();
 	struct perf_evsel *evsel;
 	struct perf_sample sample;
 	const char *cmd = "sleep";
@@ -66,16 +66,6 @@
 	}
 
 	/*
-	 * We need at least one evsel in the evlist, use the default
-	 * one: "cycles".
-	 */
-	err = perf_evlist__add_default(evlist);
-	if (err < 0) {
-		pr_debug("Not enough memory to create evsel\n");
-		goto out_delete_evlist;
-	}
-
-	/*
 	 * Create maps of threads and cpus to monitor. In this case
 	 * we start with all threads and cpus (-1, -1) but then in
 	 * perf_evlist__prepare_workload we'll fill in the only thread
diff --git a/tools/perf/tests/rdpmc.c b/tools/perf/tests/rdpmc.c
index ff94886..46649c2 100644
--- a/tools/perf/tests/rdpmc.c
+++ b/tools/perf/tests/rdpmc.c
@@ -9,8 +9,6 @@
 
 #if defined(__x86_64__) || defined(__i386__)
 
-#define barrier() asm volatile("" ::: "memory")
-
 static u64 rdpmc(unsigned int counter)
 {
 	unsigned int low, high;
diff --git a/tools/perf/tests/sample-parsing.c b/tools/perf/tests/sample-parsing.c
index 77f598d..1b67720 100644
--- a/tools/perf/tests/sample-parsing.c
+++ b/tools/perf/tests/sample-parsing.c
@@ -121,6 +121,9 @@
 	if (type & PERF_SAMPLE_DATA_SRC)
 		COMP(data_src);
 
+	if (type & PERF_SAMPLE_TRANSACTION)
+		COMP(transaction);
+
 	return true;
 }
 
@@ -165,6 +168,7 @@
 		.cpu		= 110,
 		.raw_size	= sizeof(raw_data),
 		.data_src	= 111,
+		.transaction	= 112,
 		.raw_data	= (void *)raw_data,
 		.callchain	= &callchain.callchain,
 		.branch_stack	= &branch_stack.branch_stack,
@@ -273,10 +277,11 @@
 
 	/*
 	 * Fail the test if it has not been updated when new sample format bits
-	 * were added.
+	 * were added.  Please actually update the test rather than just change
+	 * the condition below.
 	 */
-	if (PERF_SAMPLE_MAX > PERF_SAMPLE_IDENTIFIER << 1) {
-		pr_debug("sample format has changed - test needs updating\n");
+	if (PERF_SAMPLE_MAX > PERF_SAMPLE_TRANSACTION << 1) {
+		pr_debug("sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating\n");
 		return -1;
 	}
 
diff --git a/tools/perf/tests/task-exit.c b/tools/perf/tests/task-exit.c
index a3e6487..c33d95f 100644
--- a/tools/perf/tests/task-exit.c
+++ b/tools/perf/tests/task-exit.c
@@ -37,20 +37,11 @@
 	signal(SIGCHLD, sig_handler);
 	signal(SIGUSR1, sig_handler);
 
-	evlist = perf_evlist__new();
+	evlist = perf_evlist__new_default();
 	if (evlist == NULL) {
-		pr_debug("perf_evlist__new\n");
+		pr_debug("perf_evlist__new_default\n");
 		return -1;
 	}
-	/*
-	 * We need at least one evsel in the evlist, use the default
-	 * one: "cycles".
-	 */
-	err = perf_evlist__add_default(evlist);
-	if (err < 0) {
-		pr_debug("Not enough memory to create evsel\n");
-		goto out_free_evlist;
-	}
 
 	/*
 	 * Create maps of threads and cpus to monitor. In this case
@@ -117,7 +108,6 @@
 	perf_evlist__close(evlist);
 out_delete_maps:
 	perf_evlist__delete_maps(evlist);
-out_free_evlist:
 	perf_evlist__delete(evlist);
 	return err;
 }
diff --git a/tools/perf/ui/browser.h b/tools/perf/ui/browser.h
index 404ff66a..7d45d2f 100644
--- a/tools/perf/ui/browser.h
+++ b/tools/perf/ui/browser.h
@@ -21,32 +21,32 @@
 	void	      *priv;
 	const char    *title;
 	char	      *helpline;
-	unsigned int  (*refresh)(struct ui_browser *self);
-	void	      (*write)(struct ui_browser *self, void *entry, int row);
-	void	      (*seek)(struct ui_browser *self, off_t offset, int whence);
-	bool	      (*filter)(struct ui_browser *self, void *entry);
+	unsigned int  (*refresh)(struct ui_browser *browser);
+	void	      (*write)(struct ui_browser *browser, void *entry, int row);
+	void	      (*seek)(struct ui_browser *browser, off_t offset, int whence);
+	bool	      (*filter)(struct ui_browser *browser, void *entry);
 	u32	      nr_entries;
 	bool	      navkeypressed;
 	bool	      use_navkeypressed;
 };
 
 int  ui_browser__set_color(struct ui_browser *browser, int color);
-void ui_browser__set_percent_color(struct ui_browser *self,
+void ui_browser__set_percent_color(struct ui_browser *browser,
 				   double percent, bool current);
-bool ui_browser__is_current_entry(struct ui_browser *self, unsigned row);
-void ui_browser__refresh_dimensions(struct ui_browser *self);
-void ui_browser__reset_index(struct ui_browser *self);
+bool ui_browser__is_current_entry(struct ui_browser *browser, unsigned row);
+void ui_browser__refresh_dimensions(struct ui_browser *browser);
+void ui_browser__reset_index(struct ui_browser *browser);
 
-void ui_browser__gotorc(struct ui_browser *self, int y, int x);
+void ui_browser__gotorc(struct ui_browser *browser, int y, int x);
 void ui_browser__write_graph(struct ui_browser *browser, int graph);
 void __ui_browser__line_arrow(struct ui_browser *browser, unsigned int column,
 			      u64 start, u64 end);
 void __ui_browser__show_title(struct ui_browser *browser, const char *title);
 void ui_browser__show_title(struct ui_browser *browser, const char *title);
-int ui_browser__show(struct ui_browser *self, const char *title,
+int ui_browser__show(struct ui_browser *browser, const char *title,
 		     const char *helpline, ...);
-void ui_browser__hide(struct ui_browser *self);
-int ui_browser__refresh(struct ui_browser *self);
+void ui_browser__hide(struct ui_browser *browser);
+int ui_browser__refresh(struct ui_browser *browser);
 int ui_browser__run(struct ui_browser *browser, int delay_secs);
 void ui_browser__update_nr_entries(struct ui_browser *browser, u32 nr_entries);
 void ui_browser__handle_resize(struct ui_browser *browser);
@@ -63,11 +63,11 @@
 void ui_browser__argv_seek(struct ui_browser *browser, off_t offset, int whence);
 unsigned int ui_browser__argv_refresh(struct ui_browser *browser);
 
-void ui_browser__rb_tree_seek(struct ui_browser *self, off_t offset, int whence);
-unsigned int ui_browser__rb_tree_refresh(struct ui_browser *self);
+void ui_browser__rb_tree_seek(struct ui_browser *browser, off_t offset, int whence);
+unsigned int ui_browser__rb_tree_refresh(struct ui_browser *browser);
 
-void ui_browser__list_head_seek(struct ui_browser *self, off_t offset, int whence);
-unsigned int ui_browser__list_head_refresh(struct ui_browser *self);
+void ui_browser__list_head_seek(struct ui_browser *browser, off_t offset, int whence);
+unsigned int ui_browser__list_head_refresh(struct ui_browser *browser);
 
 void ui_browser__init(void);
 void annotate_browser__init(void);
diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
index 08545ae..f0697a3 100644
--- a/tools/perf/ui/browsers/annotate.c
+++ b/tools/perf/ui/browsers/annotate.c
@@ -442,35 +442,37 @@
 {
 	struct map_symbol *ms = browser->b.priv;
 	struct disasm_line *dl = browser->selection;
-	struct symbol *sym = ms->sym;
 	struct annotation *notes;
-	struct symbol *target;
-	u64 ip;
+	struct addr_map_symbol target = {
+		.map = ms->map,
+		.addr = map__objdump_2mem(ms->map, dl->ops.target.addr),
+	};
 	char title[SYM_TITLE_MAX_SIZE];
 
 	if (!ins__is_call(dl->ins))
 		return false;
 
-	ip = ms->map->map_ip(ms->map, dl->ops.target.addr);
-	target = map__find_symbol(ms->map, ip, NULL);
-	if (target == NULL) {
+	if (map_groups__find_ams(&target, NULL) ||
+	    map__rip_2objdump(target.map, target.map->map_ip(target.map,
+							     target.addr)) !=
+	    dl->ops.target.addr) {
 		ui_helpline__puts("The called function was not found.");
 		return true;
 	}
 
-	notes = symbol__annotation(target);
+	notes = symbol__annotation(target.sym);
 	pthread_mutex_lock(&notes->lock);
 
-	if (notes->src == NULL && symbol__alloc_hist(target) < 0) {
+	if (notes->src == NULL && symbol__alloc_hist(target.sym) < 0) {
 		pthread_mutex_unlock(&notes->lock);
 		ui__warning("Not enough memory for annotating '%s' symbol!\n",
-			    target->name);
+			    target.sym->name);
 		return true;
 	}
 
 	pthread_mutex_unlock(&notes->lock);
-	symbol__tui_annotate(target, ms->map, evsel, hbt);
-	sym_title(sym, ms->map, title, sizeof(title));
+	symbol__tui_annotate(target.sym, target.map, evsel, hbt);
+	sym_title(ms->sym, ms->map, title, sizeof(title));
 	ui_browser__show_title(&browser->b, title);
 	return true;
 }
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index 7ef36c3..16848bb 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -1255,7 +1255,7 @@
 	if (thread)
 		printed += scnprintf(bf + printed, size - printed,
 				    ", Thread: %s(%d)",
-				    (thread->comm_set ? thread->comm : ""),
+				     (thread->comm_set ? thread__comm_str(thread) : ""),
 				    thread->tid);
 	if (dso)
 		printed += scnprintf(bf + printed, size - printed,
@@ -1578,7 +1578,7 @@
 		if (thread != NULL &&
 		    asprintf(&options[nr_options], "Zoom %s %s(%d) thread",
 			     (browser->hists->thread_filter ? "out of" : "into"),
-			     (thread->comm_set ? thread->comm : ""),
+			     (thread->comm_set ? thread__comm_str(thread) : ""),
 			     thread->tid) > 0)
 			zoom_thread = nr_options++;
 
@@ -1598,7 +1598,7 @@
 			struct symbol *sym;
 
 			if (asprintf(&options[nr_options], "Run scripts for samples of thread [%s]",
-				browser->he_selection->thread->comm) > 0)
+				     thread__comm_str(browser->he_selection->thread)) > 0)
 				scripts_comm = nr_options++;
 
 			sym = browser->he_selection->ms.sym;
@@ -1701,7 +1701,7 @@
 				sort_thread.elide = false;
 			} else {
 				ui_helpline__fpush("To zoom out press <- or -> + \"Zoom out of %s(%d) thread\"",
-						   thread->comm_set ? thread->comm : "",
+						   thread->comm_set ? thread__comm_str(thread) : "",
 						   thread->tid);
 				browser->hists->thread_filter = thread;
 				sort_thread.elide = true;
@@ -1717,7 +1717,7 @@
 			memset(script_opt, 0, 64);
 
 			if (choice == scripts_comm)
-				sprintf(script_opt, " -c %s ", browser->he_selection->thread->comm);
+				sprintf(script_opt, " -c %s ", thread__comm_str(browser->he_selection->thread));
 
 			if (choice == scripts_symbol)
 				sprintf(script_opt, " -S %s ", browser->he_selection->ms.sym->name);
@@ -1889,7 +1889,7 @@
 	return key;
 }
 
-static bool filter_group_entries(struct ui_browser *self __maybe_unused,
+static bool filter_group_entries(struct ui_browser *browser __maybe_unused,
 				 void *entry)
 {
 	struct perf_evsel *evsel = list_entry(entry, struct perf_evsel, node);
diff --git a/tools/perf/ui/browsers/map.c b/tools/perf/ui/browsers/map.c
index 95c7cfb..b11639f 100644
--- a/tools/perf/ui/browsers/map.c
+++ b/tools/perf/ui/browsers/map.c
@@ -18,30 +18,30 @@
 	u8		  addrlen;
 };
 
-static void map_browser__write(struct ui_browser *self, void *nd, int row)
+static void map_browser__write(struct ui_browser *browser, void *nd, int row)
 {
 	struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
-	struct map_browser *mb = container_of(self, struct map_browser, b);
-	bool current_entry = ui_browser__is_current_entry(self, row);
+	struct map_browser *mb = container_of(browser, struct map_browser, b);
+	bool current_entry = ui_browser__is_current_entry(browser, row);
 	int width;
 
-	ui_browser__set_percent_color(self, 0, current_entry);
+	ui_browser__set_percent_color(browser, 0, current_entry);
 	slsmg_printf("%*" PRIx64 " %*" PRIx64 " %c ",
 		     mb->addrlen, sym->start, mb->addrlen, sym->end,
 		     sym->binding == STB_GLOBAL ? 'g' :
 		     sym->binding == STB_LOCAL  ? 'l' : 'w');
-	width = self->width - ((mb->addrlen * 2) + 4);
+	width = browser->width - ((mb->addrlen * 2) + 4);
 	if (width > 0)
 		slsmg_write_nstring(sym->name, width);
 }
 
 /* FIXME uber-kludgy, see comment on cmd_report... */
-static u32 *symbol__browser_index(struct symbol *self)
+static u32 *symbol__browser_index(struct symbol *browser)
 {
-	return ((void *)self) - sizeof(struct rb_node) - sizeof(u32);
+	return ((void *)browser) - sizeof(struct rb_node) - sizeof(u32);
 }
 
-static int map_browser__search(struct map_browser *self)
+static int map_browser__search(struct map_browser *browser)
 {
 	char target[512];
 	struct symbol *sym;
@@ -53,37 +53,37 @@
 
 	if (target[0] == '0' && tolower(target[1]) == 'x') {
 		u64 addr = strtoull(target, NULL, 16);
-		sym = map__find_symbol(self->map, addr, NULL);
+		sym = map__find_symbol(browser->map, addr, NULL);
 	} else
-		sym = map__find_symbol_by_name(self->map, target, NULL);
+		sym = map__find_symbol_by_name(browser->map, target, NULL);
 
 	if (sym != NULL) {
 		u32 *idx = symbol__browser_index(sym);
 
-		self->b.top = &sym->rb_node;
-		self->b.index = self->b.top_idx = *idx;
+		browser->b.top = &sym->rb_node;
+		browser->b.index = browser->b.top_idx = *idx;
 	} else
 		ui_helpline__fpush("%s not found!", target);
 
 	return 0;
 }
 
-static int map_browser__run(struct map_browser *self)
+static int map_browser__run(struct map_browser *browser)
 {
 	int key;
 
-	if (ui_browser__show(&self->b, self->map->dso->long_name,
+	if (ui_browser__show(&browser->b, browser->map->dso->long_name,
 			     "Press <- or ESC to exit, %s / to search",
 			     verbose ? "" : "restart with -v to use") < 0)
 		return -1;
 
 	while (1) {
-		key = ui_browser__run(&self->b, 0);
+		key = ui_browser__run(&browser->b, 0);
 
 		switch (key) {
 		case '/':
 			if (verbose)
-				map_browser__search(self);
+				map_browser__search(browser);
 		default:
 			break;
                 case K_LEFT:
@@ -94,20 +94,20 @@
 		}
 	}
 out:
-	ui_browser__hide(&self->b);
+	ui_browser__hide(&browser->b);
 	return key;
 }
 
-int map__browse(struct map *self)
+int map__browse(struct map *map)
 {
 	struct map_browser mb = {
 		.b = {
-			.entries = &self->dso->symbols[self->type],
+			.entries = &map->dso->symbols[map->type],
 			.refresh = ui_browser__rb_tree_refresh,
 			.seek	 = ui_browser__rb_tree_seek,
 			.write	 = map_browser__write,
 		},
-		.map = self,
+		.map = map,
 	};
 	struct rb_node *nd;
 	char tmp[BITS_PER_LONG / 4];
diff --git a/tools/perf/ui/browsers/map.h b/tools/perf/ui/browsers/map.h
index df8581a..2d58e4b 100644
--- a/tools/perf/ui/browsers/map.h
+++ b/tools/perf/ui/browsers/map.h
@@ -2,5 +2,5 @@
 #define _PERF_UI_MAP_BROWSER_H_ 1
 struct map;
 
-int map__browse(struct map *self);
+int map__browse(struct map *map);
 #endif /* _PERF_UI_MAP_BROWSER_H_ */
diff --git a/tools/perf/ui/browsers/scripts.c b/tools/perf/ui/browsers/scripts.c
index 12f009e..d63c68e 100644
--- a/tools/perf/ui/browsers/scripts.c
+++ b/tools/perf/ui/browsers/scripts.c
@@ -84,22 +84,22 @@
 	slsmg_write_nstring(sline->line, browser->width);
 }
 
-static int script_browser__run(struct perf_script_browser *self)
+static int script_browser__run(struct perf_script_browser *browser)
 {
 	int key;
 
-	if (ui_browser__show(&self->b, self->script_name,
+	if (ui_browser__show(&browser->b, browser->script_name,
 			     "Press <- or ESC to exit") < 0)
 		return -1;
 
 	while (1) {
-		key = ui_browser__run(&self->b, 0);
+		key = ui_browser__run(&browser->b, 0);
 
 		/* We can add some special key handling here if needed */
 		break;
 	}
 
-	ui_browser__hide(&self->b);
+	ui_browser__hide(&browser->b);
 	return key;
 }
 
diff --git a/tools/perf/ui/gtk/annotate.c b/tools/perf/ui/gtk/annotate.c
index f538794..9c7ff8d 100644
--- a/tools/perf/ui/gtk/annotate.c
+++ b/tools/perf/ui/gtk/annotate.c
@@ -154,9 +154,9 @@
 	return 0;
 }
 
-int symbol__gtk_annotate(struct symbol *sym, struct map *map,
-			 struct perf_evsel *evsel,
-			 struct hist_browser_timer *hbt)
+static int symbol__gtk_annotate(struct symbol *sym, struct map *map,
+				struct perf_evsel *evsel,
+				struct hist_browser_timer *hbt)
 {
 	GtkWidget *window;
 	GtkWidget *notebook;
@@ -226,6 +226,13 @@
 	return 0;
 }
 
+int hist_entry__gtk_annotate(struct hist_entry *he,
+			     struct perf_evsel *evsel,
+			     struct hist_browser_timer *hbt)
+{
+	return symbol__gtk_annotate(he->ms.sym, he->ms.map, evsel, hbt);
+}
+
 void perf_gtk__show_annotations(void)
 {
 	GtkWidget *window;
diff --git a/tools/perf/ui/gtk/browser.c b/tools/perf/ui/gtk/browser.c
index c95012c..c24d912 100644
--- a/tools/perf/ui/gtk/browser.c
+++ b/tools/perf/ui/gtk/browser.c
@@ -43,7 +43,7 @@
 	return NULL;
 }
 
-#ifdef HAVE_GTK_INFO_BAR
+#ifdef HAVE_GTK_INFO_BAR_SUPPORT
 GtkWidget *perf_gtk__setup_info_bar(void)
 {
 	GtkWidget *info_bar;
diff --git a/tools/perf/ui/gtk/gtk.h b/tools/perf/ui/gtk/gtk.h
index 3d96785..0a9173f 100644
--- a/tools/perf/ui/gtk/gtk.h
+++ b/tools/perf/ui/gtk/gtk.h
@@ -12,7 +12,7 @@
 	GtkWidget *main_window;
 	GtkWidget *notebook;
 
-#ifdef HAVE_GTK_INFO_BAR
+#ifdef HAVE_GTK_INFO_BAR_SUPPORT
 	GtkWidget *info_bar;
 	GtkWidget *message_label;
 #endif
@@ -20,6 +20,9 @@
 	guint statbar_ctx_id;
 };
 
+int perf_gtk__init(void);
+void perf_gtk__exit(bool wait_for_ok);
+
 extern struct perf_gtk_context *pgctx;
 
 static inline bool perf_gtk__is_active_context(struct perf_gtk_context *ctx)
@@ -31,7 +34,7 @@
 int perf_gtk__deactivate_context(struct perf_gtk_context **ctx);
 
 void perf_gtk__init_helpline(void);
-void perf_gtk__init_progress(void);
+void gtk_ui_progress__init(void);
 void perf_gtk__init_hpp(void);
 
 void perf_gtk__signal(int sig);
@@ -39,7 +42,7 @@
 const char *perf_gtk__get_percent_color(double percent);
 GtkWidget *perf_gtk__setup_statusbar(void);
 
-#ifdef HAVE_GTK_INFO_BAR
+#ifdef HAVE_GTK_INFO_BAR_SUPPORT
 GtkWidget *perf_gtk__setup_info_bar(void);
 #else
 static inline GtkWidget *perf_gtk__setup_info_bar(void)
@@ -48,4 +51,17 @@
 }
 #endif
 
+struct perf_evsel;
+struct perf_evlist;
+struct hist_entry;
+struct hist_browser_timer;
+
+int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist, const char *help,
+				  struct hist_browser_timer *hbt,
+				  float min_pcnt);
+int hist_entry__gtk_annotate(struct hist_entry *he,
+			     struct perf_evsel *evsel,
+			     struct hist_browser_timer *hbt);
+void perf_gtk__show_annotations(void);
+
 #endif /* _PERF_GTK_H_ */
diff --git a/tools/perf/ui/gtk/progress.c b/tools/perf/ui/gtk/progress.c
index 482bcf3..b656655 100644
--- a/tools/perf/ui/gtk/progress.c
+++ b/tools/perf/ui/gtk/progress.c
@@ -7,14 +7,14 @@
 static GtkWidget *dialog;
 static GtkWidget *progress;
 
-static void gtk_progress_update(u64 curr, u64 total, const char *title)
+static void gtk_ui_progress__update(struct ui_progress *p)
 {
-	double fraction = total ? 1.0 * curr / total : 0.0;
+	double fraction = p->total ? 1.0 * p->curr / p->total : 0.0;
 	char buf[1024];
 
 	if (dialog == NULL) {
 		GtkWidget *vbox = gtk_vbox_new(TRUE, 5);
-		GtkWidget *label = gtk_label_new(title);
+		GtkWidget *label = gtk_label_new(p->title);
 
 		dialog = gtk_window_new(GTK_WINDOW_TOPLEVEL);
 		progress = gtk_progress_bar_new();
@@ -32,7 +32,7 @@
 	}
 
 	gtk_progress_bar_set_fraction(GTK_PROGRESS_BAR(progress), fraction);
-	snprintf(buf, sizeof(buf), "%"PRIu64" / %"PRIu64, curr, total);
+	snprintf(buf, sizeof(buf), "%"PRIu64" / %"PRIu64, p->curr, p->total);
 	gtk_progress_bar_set_text(GTK_PROGRESS_BAR(progress), buf);
 
 	/* we didn't call gtk_main yet, so do it manually */
@@ -40,7 +40,7 @@
 		gtk_main_iteration();
 }
 
-static void gtk_progress_finish(void)
+static void gtk_ui_progress__finish(void)
 {
 	/* this will also destroy all of its children */
 	gtk_widget_destroy(dialog);
@@ -48,12 +48,12 @@
 	dialog = NULL;
 }
 
-static struct ui_progress gtk_progress_fns = {
-	.update		= gtk_progress_update,
-	.finish		= gtk_progress_finish,
+static struct ui_progress_ops gtk_ui_progress__ops = {
+	.update		= gtk_ui_progress__update,
+	.finish		= gtk_ui_progress__finish,
 };
 
-void perf_gtk__init_progress(void)
+void gtk_ui_progress__init(void)
 {
-	progress_fns = &gtk_progress_fns;
+	ui_progress__ops = &gtk_ui_progress__ops;
 }
diff --git a/tools/perf/ui/gtk/setup.c b/tools/perf/ui/gtk/setup.c
index 6c2dd2e..1d57676 100644
--- a/tools/perf/ui/gtk/setup.c
+++ b/tools/perf/ui/gtk/setup.c
@@ -8,7 +8,7 @@
 {
 	perf_error__register(&perf_gtk_eops);
 	perf_gtk__init_helpline();
-	perf_gtk__init_progress();
+	gtk_ui_progress__init();
 	perf_gtk__init_hpp();
 
 	return gtk_init_check(NULL, NULL) ? 0 : -1;
diff --git a/tools/perf/ui/gtk/util.c b/tools/perf/ui/gtk/util.c
index c06942a..696c1fb 100644
--- a/tools/perf/ui/gtk/util.c
+++ b/tools/perf/ui/gtk/util.c
@@ -53,7 +53,7 @@
 	return 0;
 }
 
-#ifdef HAVE_GTK_INFO_BAR
+#ifdef HAVE_GTK_INFO_BAR_SUPPORT
 static int perf_gtk__warning_info_bar(const char *format, va_list args)
 {
 	char *msg;
@@ -105,7 +105,7 @@
 
 struct perf_error_ops perf_gtk_eops = {
 	.error		= perf_gtk__error,
-#ifdef HAVE_GTK_INFO_BAR
+#ifdef HAVE_GTK_INFO_BAR_SUPPORT
 	.warning	= perf_gtk__warning_info_bar,
 #else
 	.warning	= perf_gtk__warning_statusbar,
diff --git a/tools/perf/ui/hist.c b/tools/perf/ui/hist.c
index 0a19328..78f4c92 100644
--- a/tools/perf/ui/hist.c
+++ b/tools/perf/ui/hist.c
@@ -117,7 +117,7 @@
 			      struct perf_hpp *hpp, struct hist_entry *he) 	\
 {										\
 	return __hpp__fmt(hpp, he, he_get_##_field, " %6.2f%%",			\
-			  (hpp_snprint_fn)percent_color_snprintf, true);	\
+			  percent_color_snprintf, true);			\
 }
 
 #define __HPP_ENTRY_PERCENT_FN(_type, _field)					\
diff --git a/tools/perf/ui/progress.c b/tools/perf/ui/progress.c
index 3ec69560..a0f24c7 100644
--- a/tools/perf/ui/progress.c
+++ b/tools/perf/ui/progress.c
@@ -1,26 +1,38 @@
 #include "../cache.h"
 #include "progress.h"
 
-static void nop_progress_update(u64 curr __maybe_unused,
-				u64 total __maybe_unused,
-				const char *title __maybe_unused)
+static void null_progress__update(struct ui_progress *p __maybe_unused)
 {
 }
 
-static struct ui_progress default_progress_fns =
+static struct ui_progress_ops null_progress__ops =
 {
-	.update		= nop_progress_update,
+	.update = null_progress__update,
 };
 
-struct ui_progress *progress_fns = &default_progress_fns;
+struct ui_progress_ops *ui_progress__ops = &null_progress__ops;
 
-void ui_progress__update(u64 curr, u64 total, const char *title)
+void ui_progress__update(struct ui_progress *p, u64 adv)
 {
-	return progress_fns->update(curr, total, title);
+	p->curr += adv;
+
+	if (p->curr >= p->next) {
+		p->next += p->step;
+		ui_progress__ops->update(p);
+	}
+}
+
+void ui_progress__init(struct ui_progress *p, u64 total, const char *title)
+{
+	p->curr = 0;
+	p->next = p->step = total / 16;
+	p->total = total;
+	p->title = title;
+
 }
 
 void ui_progress__finish(void)
 {
-	if (progress_fns->finish)
-		progress_fns->finish();
+	if (ui_progress__ops->finish)
+		ui_progress__ops->finish();
 }
diff --git a/tools/perf/ui/progress.h b/tools/perf/ui/progress.h
index 257cc22..29ec8ef 100644
--- a/tools/perf/ui/progress.h
+++ b/tools/perf/ui/progress.h
@@ -3,16 +3,21 @@
 
 #include <../types.h>
 
+void ui_progress__finish(void);
+ 
 struct ui_progress {
-	void (*update)(u64, u64, const char *);
+	const char *title;
+	u64 curr, next, step, total;
+};
+ 
+void ui_progress__init(struct ui_progress *p, u64 total, const char *title);
+void ui_progress__update(struct ui_progress *p, u64 adv);
+
+struct ui_progress_ops {
+	void (*update)(struct ui_progress *p);
 	void (*finish)(void);
 };
 
-extern struct ui_progress *progress_fns;
-
-void ui_progress__init(void);
-
-void ui_progress__update(u64 curr, u64 total, const char *title);
-void ui_progress__finish(void);
+extern struct ui_progress_ops *ui_progress__ops;
 
 #endif
diff --git a/tools/perf/ui/setup.c b/tools/perf/ui/setup.c
index 47d9a57..5df5140 100644
--- a/tools/perf/ui/setup.c
+++ b/tools/perf/ui/setup.c
@@ -1,10 +1,64 @@
 #include <pthread.h>
+#include <dlfcn.h>
 
 #include "../util/cache.h"
 #include "../util/debug.h"
 #include "../util/hist.h"
 
 pthread_mutex_t ui__lock = PTHREAD_MUTEX_INITIALIZER;
+void *perf_gtk_handle;
+
+#ifdef HAVE_GTK2_SUPPORT
+static int setup_gtk_browser(void)
+{
+	int (*perf_ui_init)(void);
+
+	if (perf_gtk_handle)
+		return 0;
+
+	perf_gtk_handle = dlopen(PERF_GTK_DSO, RTLD_LAZY);
+	if (perf_gtk_handle == NULL) {
+		char buf[PATH_MAX];
+		scnprintf(buf, sizeof(buf), "%s/%s", LIBDIR, PERF_GTK_DSO);
+		perf_gtk_handle = dlopen(buf, RTLD_LAZY);
+	}
+	if (perf_gtk_handle == NULL)
+		return -1;
+
+	perf_ui_init = dlsym(perf_gtk_handle, "perf_gtk__init");
+	if (perf_ui_init == NULL)
+		goto out_close;
+
+	if (perf_ui_init() == 0)
+		return 0;
+
+out_close:
+	dlclose(perf_gtk_handle);
+	return -1;
+}
+
+static void exit_gtk_browser(bool wait_for_ok)
+{
+	void (*perf_ui_exit)(bool);
+
+	if (perf_gtk_handle == NULL)
+		return;
+
+	perf_ui_exit = dlsym(perf_gtk_handle, "perf_gtk__exit");
+	if (perf_ui_exit == NULL)
+		goto out_close;
+
+	perf_ui_exit(wait_for_ok);
+
+out_close:
+	dlclose(perf_gtk_handle);
+
+	perf_gtk_handle = NULL;
+}
+#else
+static inline int setup_gtk_browser(void) { return -1; }
+static inline void exit_gtk_browser(bool wait_for_ok __maybe_unused) {}
+#endif
 
 void setup_browser(bool fallback_to_pager)
 {
@@ -17,8 +71,11 @@
 
 	switch (use_browser) {
 	case 2:
-		if (perf_gtk__init() == 0)
+		if (setup_gtk_browser() == 0)
 			break;
+		printf("GTK browser requested but could not find %s\n",
+		       PERF_GTK_DSO);
+		sleep(1);
 		/* fall through */
 	case 1:
 		use_browser = 1;
@@ -39,7 +96,7 @@
 {
 	switch (use_browser) {
 	case 2:
-		perf_gtk__exit(wait_for_ok);
+		exit_gtk_browser(wait_for_ok);
 		break;
 
 	case 1:
diff --git a/tools/perf/ui/stdio/hist.c b/tools/perf/ui/stdio/hist.c
index 6c15268..c244cb5 100644
--- a/tools/perf/ui/stdio/hist.c
+++ b/tools/perf/ui/stdio/hist.c
@@ -213,20 +213,19 @@
 	return ret;
 }
 
-static size_t __callchain__fprintf_flat(FILE *fp,
-					struct callchain_node *self,
+static size_t __callchain__fprintf_flat(FILE *fp, struct callchain_node *node,
 					u64 total_samples)
 {
 	struct callchain_list *chain;
 	size_t ret = 0;
 
-	if (!self)
+	if (!node)
 		return 0;
 
-	ret += __callchain__fprintf_flat(fp, self->parent, total_samples);
+	ret += __callchain__fprintf_flat(fp, node->parent, total_samples);
 
 
-	list_for_each_entry(chain, &self->val, list) {
+	list_for_each_entry(chain, &node->val, list) {
 		if (chain->ip >= PERF_CONTEXT_MAX)
 			continue;
 		if (chain->ms.sym)
@@ -239,15 +238,14 @@
 	return ret;
 }
 
-static size_t callchain__fprintf_flat(FILE *fp, struct rb_root *self,
+static size_t callchain__fprintf_flat(FILE *fp, struct rb_root *tree,
 				      u64 total_samples)
 {
 	size_t ret = 0;
 	u32 entries_printed = 0;
-	struct rb_node *rb_node;
 	struct callchain_node *chain;
+	struct rb_node *rb_node = rb_first(tree);
 
-	rb_node = rb_first(self);
 	while (rb_node) {
 		double percent;
 
diff --git a/tools/perf/ui/tui/progress.c b/tools/perf/ui/tui/progress.c
index 6c2184d..3e2d936 100644
--- a/tools/perf/ui/tui/progress.c
+++ b/tools/perf/ui/tui/progress.c
@@ -2,9 +2,10 @@
 #include "../progress.h"
 #include "../libslang.h"
 #include "../ui.h"
+#include "tui.h"
 #include "../browser.h"
 
-static void tui_progress__update(u64 curr, u64 total, const char *title)
+static void tui_progress__update(struct ui_progress *p)
 {
 	int bar, y;
 	/*
@@ -14,7 +15,7 @@
 	if (use_browser <= 0)
 		return;
 
-	if (total == 0)
+	if (p->total == 0)
 		return;
 
 	ui__refresh_dimensions(true);
@@ -23,20 +24,20 @@
 	SLsmg_set_color(0);
 	SLsmg_draw_box(y, 0, 3, SLtt_Screen_Cols);
 	SLsmg_gotorc(y++, 1);
-	SLsmg_write_string((char *)title);
+	SLsmg_write_string((char *)p->title);
 	SLsmg_set_color(HE_COLORSET_SELECTED);
-	bar = ((SLtt_Screen_Cols - 2) * curr) / total;
+	bar = ((SLtt_Screen_Cols - 2) * p->curr) / p->total;
 	SLsmg_fill_region(y, 1, 1, bar, ' ');
 	SLsmg_refresh();
 	pthread_mutex_unlock(&ui__lock);
 }
 
-static struct ui_progress tui_progress_fns =
+static struct ui_progress_ops tui_progress__ops =
 {
 	.update		= tui_progress__update,
 };
 
-void ui_progress__init(void)
+void tui_progress__init(void)
 {
-	progress_fns = &tui_progress_fns;
+	ui_progress__ops = &tui_progress__ops;
 }
diff --git a/tools/perf/ui/tui/setup.c b/tools/perf/ui/tui/setup.c
index b940148..2f61256 100644
--- a/tools/perf/ui/tui/setup.c
+++ b/tools/perf/ui/tui/setup.c
@@ -9,6 +9,7 @@
 #include "../util.h"
 #include "../libslang.h"
 #include "../keysyms.h"
+#include "tui.h"
 
 static volatile int ui__need_resize;
 
@@ -119,7 +120,7 @@
 
 	ui_helpline__init();
 	ui_browser__init();
-	ui_progress__init();
+	tui_progress__init();
 
 	signal(SIGSEGV, ui__signal);
 	signal(SIGFPE, ui__signal);
diff --git a/tools/perf/ui/tui/tui.h b/tools/perf/ui/tui/tui.h
new file mode 100644
index 0000000..18961c7
--- /dev/null
+++ b/tools/perf/ui/tui/tui.h
@@ -0,0 +1,6 @@
+#ifndef _PERF_TUI_H_
+#define _PERF_TUI_H_ 1
+
+void tui_progress__init(void);
+
+#endif /* _PERF_TUI_H_ */
diff --git a/tools/perf/ui/ui.h b/tools/perf/ui/ui.h
index 70cb0d4..ab88383 100644
--- a/tools/perf/ui/ui.h
+++ b/tools/perf/ui/ui.h
@@ -6,13 +6,14 @@
 #include <linux/compiler.h>
 
 extern pthread_mutex_t ui__lock;
+extern void *perf_gtk_handle;
 
 extern int use_browser;
 
 void setup_browser(bool fallback_to_pager);
 void exit_browser(bool wait_for_ok);
 
-#ifdef SLANG_SUPPORT
+#ifdef HAVE_SLANG_SUPPORT
 int ui__init(void);
 void ui__exit(bool wait_for_ok);
 #else
@@ -23,17 +24,6 @@
 static inline void ui__exit(bool wait_for_ok __maybe_unused) {}
 #endif
 
-#ifdef GTK2_SUPPORT
-int perf_gtk__init(void);
-void perf_gtk__exit(bool wait_for_ok);
-#else
-static inline int perf_gtk__init(void)
-{
-	return -1;
-}
-static inline void perf_gtk__exit(bool wait_for_ok __maybe_unused) {}
-#endif
-
 void ui__refresh_dimensions(bool force);
 
 #endif /* _PERF_UI_H_ */
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index 15a77b7..39f1750 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -19,6 +19,9 @@
 then
 	TAG=$(git describe --abbrev=0 --match "v[0-9].[0-9]*" 2>/dev/null )
 	CID=$(git log -1 --abbrev=4 --pretty=format:"%h" 2>/dev/null) && CID="-g$CID"
+elif test -f ../../PERF-VERSION-FILE
+then
+	TAG=$(cut -d' ' -f3 ../../PERF-VERSION-FILE | sed -e 's/\"//g')
 fi
 if test -z "$TAG"
 then
@@ -40,7 +43,7 @@
 	VC=unset
 fi
 test "$VN" = "$VC" || {
-	echo >&2 "PERF_VERSION = $VN"
+	echo >&2 "  PERF_VERSION = $VN"
 	echo "#define PERF_VERSION \"$VN\"" >$GVF
 }
 
diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index 7eae548..cf6242c 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -825,20 +825,16 @@
 		dl->ops.target.offset = dl->ops.target.addr -
 					map__rip_2objdump(map, sym->start);
 
-	/*
-	 * kcore has no symbols, so add the call target name if it is on the
-	 * same map.
-	 */
+	/* kcore has no symbols, so add the call target name */
 	if (dl->ins && ins__is_call(dl->ins) && !dl->ops.target.name) {
-		struct symbol *s;
-		u64 ip = dl->ops.target.addr;
+		struct addr_map_symbol target = {
+			.map = map,
+			.addr = dl->ops.target.addr,
+		};
 
-		if (ip >= map->start && ip <= map->end) {
-			ip = map->map_ip(map, ip);
-			s = map__find_symbol(map, ip, NULL);
-			if (s && s->start == ip)
-				dl->ops.target.name = strdup(s->name);
-		}
+		if (!map_groups__find_ams(&target, NULL) &&
+		    target.sym->start == target.al_addr)
+			dl->ops.target.name = strdup(target.sym->name);
 	}
 
 	disasm__add(&notes->src->source, dl);
@@ -879,6 +875,8 @@
 	FILE *file;
 	int err = 0;
 	char symfs_filename[PATH_MAX];
+	struct kcore_extract kce;
+	bool delete_extract = false;
 
 	if (filename) {
 		snprintf(symfs_filename, sizeof(symfs_filename), "%s%s",
@@ -940,6 +938,23 @@
 	pr_debug("annotating [%p] %30s : [%p] %30s\n",
 		 dso, dso->long_name, sym, sym->name);
 
+	if (dso__is_kcore(dso)) {
+		kce.kcore_filename = symfs_filename;
+		kce.addr = map__rip_2objdump(map, sym->start);
+		kce.offs = sym->start;
+		kce.len = sym->end + 1 - sym->start;
+		if (!kcore_extract__create(&kce)) {
+			delete_extract = true;
+			strlcpy(symfs_filename, kce.extract_filename,
+				sizeof(symfs_filename));
+			if (free_filename) {
+				free(filename);
+				free_filename = false;
+			}
+			filename = symfs_filename;
+		}
+	}
+
 	snprintf(command, sizeof(command),
 		 "%s %s%s --start-address=0x%016" PRIx64
 		 " --stop-address=0x%016" PRIx64
@@ -972,6 +987,8 @@
 
 	pclose(file);
 out_free_filename:
+	if (delete_extract)
+		kcore_extract__delete(&kce);
 	if (free_filename)
 		free(filename);
 	return err;
@@ -1070,7 +1087,7 @@
 			  (sizeof(src_line->p) * (src_line->nr_pcnt - 1));
 
 	for (i = 0; i < len; i++) {
-		free(src_line->path);
+		free_srcline(src_line->path);
 		src_line = (void *)src_line + sizeof_src_line;
 	}
 
@@ -1081,13 +1098,11 @@
 /* Get the filename:line for the colored entries */
 static int symbol__get_source_line(struct symbol *sym, struct map *map,
 				   struct perf_evsel *evsel,
-				   struct rb_root *root, int len,
-				   const char *filename)
+				   struct rb_root *root, int len)
 {
 	u64 start;
 	int i, k;
 	int evidx = evsel->idx;
-	char cmd[PATH_MAX * 2];
 	struct source_line *src_line;
 	struct annotation *notes = symbol__annotation(sym);
 	struct sym_hist *h = annotation__histogram(notes, evidx);
@@ -1115,10 +1130,7 @@
 	start = map__rip_2objdump(map, sym->start);
 
 	for (i = 0; i < len; i++) {
-		char *path = NULL;
-		size_t line_len;
 		u64 offset;
-		FILE *fp;
 		double percent_max = 0.0;
 
 		src_line->nr_pcnt = nr_pcnt;
@@ -1135,23 +1147,9 @@
 			goto next;
 
 		offset = start + i;
-		sprintf(cmd, "addr2line -e %s %016" PRIx64, filename, offset);
-		fp = popen(cmd, "r");
-		if (!fp)
-			goto next;
-
-		if (getline(&path, &line_len, fp) < 0 || !line_len)
-			goto next_close;
-
-		src_line->path = malloc(sizeof(char) * line_len + 1);
-		if (!src_line->path)
-			goto next_close;
-
-		strcpy(src_line->path, path);
+		src_line->path = get_srcline(map->dso, offset);
 		insert_source_line(&tmp_root, src_line);
 
-	next_close:
-		pclose(fp);
 	next:
 		src_line = (void *)src_line + sizeof_src_line;
 	}
@@ -1192,7 +1190,7 @@
 
 		path = src_line->path;
 		color = get_percent_color(percent_max);
-		color_fprintf(stdout, color, " %s", path);
+		color_fprintf(stdout, color, " %s\n", path);
 
 		node = rb_next(node);
 	}
@@ -1356,7 +1354,6 @@
 			 bool full_paths, int min_pcnt, int max_lines)
 {
 	struct dso *dso = map->dso;
-	const char *filename = dso->long_name;
 	struct rb_root source_line = RB_ROOT;
 	u64 len;
 
@@ -1366,9 +1363,8 @@
 	len = symbol__size(sym);
 
 	if (print_lines) {
-		symbol__get_source_line(sym, map, evsel, &source_line,
-					len, filename);
-		print_summary(&source_line, filename);
+		symbol__get_source_line(sym, map, evsel, &source_line, len);
+		print_summary(&source_line, dso->long_name);
 	}
 
 	symbol__annotate_printf(sym, map, evsel, full_paths,
diff --git a/tools/perf/util/annotate.h b/tools/perf/util/annotate.h
index af75515..834b7b5 100644
--- a/tools/perf/util/annotate.h
+++ b/tools/perf/util/annotate.h
@@ -150,7 +150,7 @@
 			 struct perf_evsel *evsel, bool print_lines,
 			 bool full_paths, int min_pcnt, int max_lines);
 
-#ifdef SLANG_SUPPORT
+#ifdef HAVE_SLANG_SUPPORT
 int symbol__tui_annotate(struct symbol *sym, struct map *map,
 			 struct perf_evsel *evsel,
 			 struct hist_browser_timer *hbt);
@@ -165,30 +165,6 @@
 }
 #endif
 
-#ifdef GTK2_SUPPORT
-int symbol__gtk_annotate(struct symbol *sym, struct map *map,
-			 struct perf_evsel *evsel,
-			 struct hist_browser_timer *hbt);
-
-static inline int hist_entry__gtk_annotate(struct hist_entry *he,
-					   struct perf_evsel *evsel,
-					   struct hist_browser_timer *hbt)
-{
-	return symbol__gtk_annotate(he->ms.sym, he->ms.map, evsel, hbt);
-}
-
-void perf_gtk__show_annotations(void);
-#else
-static inline int hist_entry__gtk_annotate(struct hist_entry *he __maybe_unused,
-				struct perf_evsel *evsel __maybe_unused,
-				struct hist_browser_timer *hbt __maybe_unused)
-{
-	return 0;
-}
-
-static inline void perf_gtk__show_annotations(void) {}
-#endif
-
 extern const char	*disassembler_style;
 
 #endif	/* __PERF_ANNOTATE_H */
diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c
index 7ded71d..a92770c 100644
--- a/tools/perf/util/build-id.c
+++ b/tools/perf/util/build-id.c
@@ -89,14 +89,14 @@
 	return raw - build_id;
 }
 
-char *dso__build_id_filename(struct dso *self, char *bf, size_t size)
+char *dso__build_id_filename(struct dso *dso, char *bf, size_t size)
 {
 	char build_id_hex[BUILD_ID_SIZE * 2 + 1];
 
-	if (!self->has_build_id)
+	if (!dso->has_build_id)
 		return NULL;
 
-	build_id__sprintf(self->build_id, sizeof(self->build_id), build_id_hex);
+	build_id__sprintf(dso->build_id, sizeof(dso->build_id), build_id_hex);
 	if (bf == NULL) {
 		if (asprintf(&bf, "%s/.build-id/%.2s/%s", buildid_dir,
 			     build_id_hex, build_id_hex + 2) < 0)
diff --git a/tools/perf/util/build-id.h b/tools/perf/util/build-id.h
index a811f5c..929f28a 100644
--- a/tools/perf/util/build-id.h
+++ b/tools/perf/util/build-id.h
@@ -10,10 +10,9 @@
 struct dso;
 
 int build_id__sprintf(const u8 *build_id, int len, char *bf);
-char *dso__build_id_filename(struct dso *self, char *bf, size_t size);
+char *dso__build_id_filename(struct dso *dso, char *bf, size_t size);
 
 int build_id__mark_dso_hit(struct perf_tool *tool, union perf_event *event,
 			   struct perf_sample *sample, struct perf_evsel *evsel,
 			   struct machine *machine);
-
 #endif
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 26e3672..7b176dd 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -70,8 +70,7 @@
 extern char *perf_pathdup(const char *fmt, ...)
 	__attribute__((format (printf, 1, 2)));
 
-#ifndef HAVE_STRLCPY
+/* Matches the libc/libbsd function attribute so we declare this unconditionally: */
 extern size_t strlcpy(char *dest, const char *src, size_t size);
-#endif
 
 #endif /* __PERF_CACHE_H */
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 482f680..e3970e3 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -21,12 +21,6 @@
 
 __thread struct callchain_cursor callchain_cursor;
 
-#define chain_for_each_child(child, parent)	\
-	list_for_each_entry(child, &parent->children, siblings)
-
-#define chain_for_each_child_safe(child, next, parent)	\
-	list_for_each_entry_safe(child, next, &parent->children, siblings)
-
 static void
 rb_insert_callchain(struct rb_root *root, struct callchain_node *chain,
 		    enum chain_mode mode)
@@ -71,10 +65,16 @@
 __sort_chain_flat(struct rb_root *rb_root, struct callchain_node *node,
 		  u64 min_hit)
 {
+	struct rb_node *n;
 	struct callchain_node *child;
 
-	chain_for_each_child(child, node)
+	n = rb_first(&node->rb_root_in);
+	while (n) {
+		child = rb_entry(n, struct callchain_node, rb_node_in);
+		n = rb_next(n);
+
 		__sort_chain_flat(rb_root, child, min_hit);
+	}
 
 	if (node->hit && node->hit >= min_hit)
 		rb_insert_callchain(rb_root, node, CHAIN_FLAT);
@@ -94,11 +94,16 @@
 static void __sort_chain_graph_abs(struct callchain_node *node,
 				   u64 min_hit)
 {
+	struct rb_node *n;
 	struct callchain_node *child;
 
 	node->rb_root = RB_ROOT;
+	n = rb_first(&node->rb_root_in);
 
-	chain_for_each_child(child, node) {
+	while (n) {
+		child = rb_entry(n, struct callchain_node, rb_node_in);
+		n = rb_next(n);
+
 		__sort_chain_graph_abs(child, min_hit);
 		if (callchain_cumul_hits(child) >= min_hit)
 			rb_insert_callchain(&node->rb_root, child,
@@ -117,13 +122,18 @@
 static void __sort_chain_graph_rel(struct callchain_node *node,
 				   double min_percent)
 {
+	struct rb_node *n;
 	struct callchain_node *child;
 	u64 min_hit;
 
 	node->rb_root = RB_ROOT;
 	min_hit = ceil(node->children_hit * min_percent);
 
-	chain_for_each_child(child, node) {
+	n = rb_first(&node->rb_root_in);
+	while (n) {
+		child = rb_entry(n, struct callchain_node, rb_node_in);
+		n = rb_next(n);
+
 		__sort_chain_graph_rel(child, min_percent);
 		if (callchain_cumul_hits(child) >= min_hit)
 			rb_insert_callchain(&node->rb_root, child,
@@ -173,19 +183,26 @@
 		return NULL;
 	}
 	new->parent = parent;
-	INIT_LIST_HEAD(&new->children);
 	INIT_LIST_HEAD(&new->val);
 
 	if (inherit_children) {
-		struct callchain_node *next;
+		struct rb_node *n;
+		struct callchain_node *child;
 
-		list_splice(&parent->children, &new->children);
-		INIT_LIST_HEAD(&parent->children);
+		new->rb_root_in = parent->rb_root_in;
+		parent->rb_root_in = RB_ROOT;
 
-		chain_for_each_child(next, new)
-			next->parent = new;
+		n = rb_first(&new->rb_root_in);
+		while (n) {
+			child = rb_entry(n, struct callchain_node, rb_node_in);
+			child->parent = new;
+			n = rb_next(n);
+		}
+
+		/* make it the first child */
+		rb_link_node(&new->rb_node_in, NULL, &parent->rb_root_in.rb_node);
+		rb_insert_color(&new->rb_node_in, &parent->rb_root_in);
 	}
-	list_add_tail(&new->siblings, &parent->children);
 
 	return new;
 }
@@ -223,7 +240,7 @@
 	}
 }
 
-static void
+static struct callchain_node *
 add_child(struct callchain_node *parent,
 	  struct callchain_cursor *cursor,
 	  u64 period)
@@ -235,6 +252,19 @@
 
 	new->children_hit = 0;
 	new->hit = period;
+	return new;
+}
+
+static s64 match_chain(struct callchain_cursor_node *node,
+		      struct callchain_list *cnode)
+{
+	struct symbol *sym = node->sym;
+
+	if (cnode->ms.sym && sym &&
+	    callchain_param.key == CCKEY_FUNCTION)
+		return cnode->ms.sym->start - sym->start;
+	else
+		return cnode->ip - node->ip;
 }
 
 /*
@@ -272,9 +302,33 @@
 
 	/* create a new child for the new branch if any */
 	if (idx_total < cursor->nr) {
+		struct callchain_node *first;
+		struct callchain_list *cnode;
+		struct callchain_cursor_node *node;
+		struct rb_node *p, **pp;
+
 		parent->hit = 0;
-		add_child(parent, cursor, period);
 		parent->children_hit += period;
+
+		node = callchain_cursor_current(cursor);
+		new = add_child(parent, cursor, period);
+
+		/*
+		 * This is second child since we moved parent's children
+		 * to new (first) child above.
+		 */
+		p = parent->rb_root_in.rb_node;
+		first = rb_entry(p, struct callchain_node, rb_node_in);
+		cnode = list_first_entry(&first->val, struct callchain_list,
+					 list);
+
+		if (match_chain(node, cnode) < 0)
+			pp = &p->rb_left;
+		else
+			pp = &p->rb_right;
+
+		rb_link_node(&new->rb_node_in, p, pp);
+		rb_insert_color(&new->rb_node_in, &parent->rb_root_in);
 	} else {
 		parent->hit = period;
 	}
@@ -291,16 +345,40 @@
 		      u64 period)
 {
 	struct callchain_node *rnode;
+	struct callchain_cursor_node *node;
+	struct rb_node **p = &root->rb_root_in.rb_node;
+	struct rb_node *parent = NULL;
+
+	node = callchain_cursor_current(cursor);
+	if (!node)
+		return;
 
 	/* lookup in childrens */
-	chain_for_each_child(rnode, root) {
-		unsigned int ret = append_chain(rnode, cursor, period);
+	while (*p) {
+		s64 ret;
+		struct callchain_list *cnode;
 
-		if (!ret)
+		parent = *p;
+		rnode = rb_entry(parent, struct callchain_node, rb_node_in);
+		cnode = list_first_entry(&rnode->val, struct callchain_list,
+					 list);
+
+		/* just check first entry */
+		ret = match_chain(node, cnode);
+		if (ret == 0) {
+			append_chain(rnode, cursor, period);
 			goto inc_children_hit;
+		}
+
+		if (ret < 0)
+			p = &parent->rb_left;
+		else
+			p = &parent->rb_right;
 	}
 	/* nothing in children, add to the current node */
-	add_child(root, cursor, period);
+	rnode = add_child(root, cursor, period);
+	rb_link_node(&rnode->rb_node_in, parent, p);
+	rb_insert_color(&rnode->rb_node_in, &root->rb_root_in);
 
 inc_children_hit:
 	root->children_hit += period;
@@ -325,28 +403,20 @@
 	 */
 	list_for_each_entry(cnode, &root->val, list) {
 		struct callchain_cursor_node *node;
-		struct symbol *sym;
 
 		node = callchain_cursor_current(cursor);
 		if (!node)
 			break;
 
-		sym = node->sym;
-
-		if (cnode->ms.sym && sym &&
-		    callchain_param.key == CCKEY_FUNCTION) {
-			if (cnode->ms.sym->start != sym->start)
-				break;
-		} else if (cnode->ip != node->ip)
+		if (match_chain(node, cnode) != 0)
 			break;
 
-		if (!found)
-			found = true;
+		found = true;
 
 		callchain_cursor_advance(cursor);
 	}
 
-	/* matches not, relay on the parent */
+	/* matches not, relay no the parent */
 	if (!found) {
 		cursor->curr = curr_snap;
 		cursor->pos = start;
@@ -395,8 +465,9 @@
 		   struct callchain_node *dst, struct callchain_node *src)
 {
 	struct callchain_cursor_node **old_last = cursor->last;
-	struct callchain_node *child, *next_child;
+	struct callchain_node *child;
 	struct callchain_list *list, *next_list;
+	struct rb_node *n;
 	int old_pos = cursor->nr;
 	int err = 0;
 
@@ -412,12 +483,16 @@
 		append_chain_children(dst, cursor, src->hit);
 	}
 
-	chain_for_each_child_safe(child, next_child, src) {
+	n = rb_first(&src->rb_root_in);
+	while (n) {
+		child = container_of(n, struct callchain_node, rb_node_in);
+		n = rb_next(n);
+		rb_erase(&child->rb_node_in, &src->rb_root_in);
+
 		err = merge_chain_branch(cursor, dst, child);
 		if (err)
 			break;
 
-		list_del(&child->siblings);
 		free(child);
 	}
 
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 9e99060..4f7f989 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -21,11 +21,11 @@
 
 struct callchain_node {
 	struct callchain_node	*parent;
-	struct list_head	siblings;
-	struct list_head	children;
 	struct list_head	val;
-	struct rb_node		rb_node; /* to sort nodes in an rbtree */
-	struct rb_root		rb_root; /* sorted tree of children */
+	struct rb_node		rb_node_in; /* to insert nodes in an rbtree */
+	struct rb_node		rb_node;    /* to sort nodes in an output tree */
+	struct rb_root		rb_root_in; /* input tree of children */
+	struct rb_root		rb_root;    /* sorted output tree of children */
 	unsigned int		val_nr;
 	u64			hit;
 	u64			children_hit;
@@ -86,13 +86,12 @@
 
 static inline void callchain_init(struct callchain_root *root)
 {
-	INIT_LIST_HEAD(&root->node.siblings);
-	INIT_LIST_HEAD(&root->node.children);
 	INIT_LIST_HEAD(&root->node.val);
 
 	root->node.parent = NULL;
 	root->node.hit = 0;
 	root->node.children_hit = 0;
+	root->node.rb_root_in = RB_ROOT;
 	root->max_depth = 0;
 }
 
diff --git a/tools/perf/util/color.c b/tools/perf/util/color.c
index 11e46da..66e44a5 100644
--- a/tools/perf/util/color.c
+++ b/tools/perf/util/color.c
@@ -318,8 +318,15 @@
 	return r;
 }
 
-int percent_color_snprintf(char *bf, size_t size, const char *fmt, double percent)
+int percent_color_snprintf(char *bf, size_t size, const char *fmt, ...)
 {
-	const char *color = get_percent_color(percent);
+	va_list args;
+	double percent;
+	const char *color;
+
+	va_start(args, fmt);
+	percent = va_arg(args, double);
+	va_end(args);
+	color = get_percent_color(percent);
 	return color_snprintf(bf, size, color, fmt, percent);
 }
diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h
index dea082b..fced384 100644
--- a/tools/perf/util/color.h
+++ b/tools/perf/util/color.h
@@ -39,7 +39,7 @@
 int color_snprintf(char *bf, size_t size, const char *color, const char *fmt, ...);
 int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...);
 int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf);
-int percent_color_snprintf(char *bf, size_t size, const char *fmt, double percent);
+int percent_color_snprintf(char *bf, size_t size, const char *fmt, ...);
 int percent_color_fprintf(FILE *fp, const char *fmt, double percent);
 const char *get_percent_color(double percent);
 
diff --git a/tools/perf/util/comm.c b/tools/perf/util/comm.c
new file mode 100644
index 0000000..ee0df0e
--- /dev/null
+++ b/tools/perf/util/comm.c
@@ -0,0 +1,121 @@
+#include "comm.h"
+#include "util.h"
+#include <stdlib.h>
+#include <stdio.h>
+
+struct comm_str {
+	char *str;
+	struct rb_node rb_node;
+	int ref;
+};
+
+/* Should perhaps be moved to struct machine */
+static struct rb_root comm_str_root;
+
+static void comm_str__get(struct comm_str *cs)
+{
+	cs->ref++;
+}
+
+static void comm_str__put(struct comm_str *cs)
+{
+	if (!--cs->ref) {
+		rb_erase(&cs->rb_node, &comm_str_root);
+		free(cs->str);
+		free(cs);
+	}
+}
+
+static struct comm_str *comm_str__alloc(const char *str)
+{
+	struct comm_str *cs;
+
+	cs = zalloc(sizeof(*cs));
+	if (!cs)
+		return NULL;
+
+	cs->str = strdup(str);
+	if (!cs->str) {
+		free(cs);
+		return NULL;
+	}
+
+	return cs;
+}
+
+static struct comm_str *comm_str__findnew(const char *str, struct rb_root *root)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct comm_str *iter, *new;
+	int cmp;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct comm_str, rb_node);
+
+		cmp = strcmp(str, iter->str);
+		if (!cmp)
+			return iter;
+
+		if (cmp < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	new = comm_str__alloc(str);
+	if (!new)
+		return NULL;
+
+	rb_link_node(&new->rb_node, parent, p);
+	rb_insert_color(&new->rb_node, root);
+
+	return new;
+}
+
+struct comm *comm__new(const char *str, u64 timestamp)
+{
+	struct comm *comm = zalloc(sizeof(*comm));
+
+	if (!comm)
+		return NULL;
+
+	comm->start = timestamp;
+
+	comm->comm_str = comm_str__findnew(str, &comm_str_root);
+	if (!comm->comm_str) {
+		free(comm);
+		return NULL;
+	}
+
+	comm_str__get(comm->comm_str);
+
+	return comm;
+}
+
+void comm__override(struct comm *comm, const char *str, u64 timestamp)
+{
+	struct comm_str *old = comm->comm_str;
+
+	comm->comm_str = comm_str__findnew(str, &comm_str_root);
+	if (!comm->comm_str) {
+		comm->comm_str = old;
+		return;
+	}
+
+	comm->start = timestamp;
+	comm_str__get(comm->comm_str);
+	comm_str__put(old);
+}
+
+void comm__free(struct comm *comm)
+{
+	comm_str__put(comm->comm_str);
+	free(comm);
+}
+
+const char *comm__str(const struct comm *comm)
+{
+	return comm->comm_str->str;
+}
diff --git a/tools/perf/util/comm.h b/tools/perf/util/comm.h
new file mode 100644
index 0000000..7a86e56
--- /dev/null
+++ b/tools/perf/util/comm.h
@@ -0,0 +1,21 @@
+#ifndef __PERF_COMM_H
+#define __PERF_COMM_H
+
+#include "../perf.h"
+#include <linux/rbtree.h>
+#include <linux/list.h>
+
+struct comm_str;
+
+struct comm {
+	struct comm_str *comm_str;
+	u64 start;
+	struct list_head list;
+};
+
+void comm__free(struct comm *comm);
+struct comm *comm__new(const char *str, u64 timestamp);
+const char *comm__str(const struct comm *comm);
+void comm__override(struct comm *comm, const char *str, u64 timestamp);
+
+#endif  /* __PERF_COMM_H */
diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index beb8cf9..a9b48c4 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -1,5 +1,5 @@
 #include "util.h"
-#include "sysfs.h"
+#include "fs.h"
 #include "../perf.h"
 #include "cpumap.h"
 #include <assert.h>
@@ -216,7 +216,7 @@
 
 	cpu = map->map[idx];
 
-	mnt = sysfs_find_mountpoint();
+	mnt = sysfs__mountpoint();
 	if (!mnt)
 		return -1;
 
@@ -279,7 +279,7 @@
 
 	cpu = map->map[idx];
 
-	mnt = sysfs_find_mountpoint();
+	mnt = sysfs__mountpoint();
 	if (!mnt)
 		return -1;
 
diff --git a/tools/perf/util/data.c b/tools/perf/util/data.c
new file mode 100644
index 0000000..7d09faf
--- /dev/null
+++ b/tools/perf/util/data.c
@@ -0,0 +1,120 @@
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <string.h>
+
+#include "data.h"
+#include "util.h"
+
+static bool check_pipe(struct perf_data_file *file)
+{
+	struct stat st;
+	bool is_pipe = false;
+	int fd = perf_data_file__is_read(file) ?
+		 STDIN_FILENO : STDOUT_FILENO;
+
+	if (!file->path) {
+		if (!fstat(fd, &st) && S_ISFIFO(st.st_mode))
+			is_pipe = true;
+	} else {
+		if (!strcmp(file->path, "-"))
+			is_pipe = true;
+	}
+
+	if (is_pipe)
+		file->fd = fd;
+
+	return file->is_pipe = is_pipe;
+}
+
+static int check_backup(struct perf_data_file *file)
+{
+	struct stat st;
+
+	if (!stat(file->path, &st) && st.st_size) {
+		/* TODO check errors properly */
+		char oldname[PATH_MAX];
+		snprintf(oldname, sizeof(oldname), "%s.old",
+			 file->path);
+		unlink(oldname);
+		rename(file->path, oldname);
+	}
+
+	return 0;
+}
+
+static int open_file_read(struct perf_data_file *file)
+{
+	struct stat st;
+	int fd;
+
+	fd = open(file->path, O_RDONLY);
+	if (fd < 0) {
+		int err = errno;
+
+		pr_err("failed to open %s: %s", file->path, strerror(err));
+		if (err == ENOENT && !strcmp(file->path, "perf.data"))
+			pr_err("  (try 'perf record' first)");
+		pr_err("\n");
+		return -err;
+	}
+
+	if (fstat(fd, &st) < 0)
+		goto out_close;
+
+	if (!file->force && st.st_uid && (st.st_uid != geteuid())) {
+		pr_err("file %s not owned by current user or root\n",
+		       file->path);
+		goto out_close;
+	}
+
+	if (!st.st_size) {
+		pr_info("zero-sized file (%s), nothing to do!\n",
+			file->path);
+		goto out_close;
+	}
+
+	file->size = st.st_size;
+	return fd;
+
+ out_close:
+	close(fd);
+	return -1;
+}
+
+static int open_file_write(struct perf_data_file *file)
+{
+	if (check_backup(file))
+		return -1;
+
+	return open(file->path, O_CREAT|O_RDWR|O_TRUNC, S_IRUSR|S_IWUSR);
+}
+
+static int open_file(struct perf_data_file *file)
+{
+	int fd;
+
+	fd = perf_data_file__is_read(file) ?
+	     open_file_read(file) : open_file_write(file);
+
+	file->fd = fd;
+	return fd < 0 ? -1 : 0;
+}
+
+int perf_data_file__open(struct perf_data_file *file)
+{
+	if (check_pipe(file))
+		return 0;
+
+	if (!file->path)
+		file->path = "perf.data";
+
+	return open_file(file);
+}
+
+void perf_data_file__close(struct perf_data_file *file)
+{
+	close(file->fd);
+}
diff --git a/tools/perf/util/data.h b/tools/perf/util/data.h
new file mode 100644
index 0000000..8c2df80
--- /dev/null
+++ b/tools/perf/util/data.h
@@ -0,0 +1,48 @@
+#ifndef __PERF_DATA_H
+#define __PERF_DATA_H
+
+#include <stdbool.h>
+
+enum perf_data_mode {
+	PERF_DATA_MODE_WRITE,
+	PERF_DATA_MODE_READ,
+};
+
+struct perf_data_file {
+	const char *path;
+	int fd;
+	bool is_pipe;
+	bool force;
+	unsigned long size;
+	enum perf_data_mode mode;
+};
+
+static inline bool perf_data_file__is_read(struct perf_data_file *file)
+{
+	return file->mode == PERF_DATA_MODE_READ;
+}
+
+static inline bool perf_data_file__is_write(struct perf_data_file *file)
+{
+	return file->mode == PERF_DATA_MODE_WRITE;
+}
+
+static inline int perf_data_file__is_pipe(struct perf_data_file *file)
+{
+	return file->is_pipe;
+}
+
+static inline int perf_data_file__fd(struct perf_data_file *file)
+{
+	return file->fd;
+}
+
+static inline unsigned long perf_data_file__size(struct perf_data_file *file)
+{
+	return file->size;
+}
+
+int perf_data_file__open(struct perf_data_file *file);
+void perf_data_file__close(struct perf_data_file *file);
+
+#endif /* __PERF_DATA_H */
diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c
index e3c1ff8..af4c687c 100644
--- a/tools/perf/util/dso.c
+++ b/tools/perf/util/dso.c
@@ -7,19 +7,20 @@
 char dso__symtab_origin(const struct dso *dso)
 {
 	static const char origin[] = {
-		[DSO_BINARY_TYPE__KALLSYMS]		= 'k',
-		[DSO_BINARY_TYPE__VMLINUX]		= 'v',
-		[DSO_BINARY_TYPE__JAVA_JIT]		= 'j',
-		[DSO_BINARY_TYPE__DEBUGLINK]		= 'l',
-		[DSO_BINARY_TYPE__BUILD_ID_CACHE]	= 'B',
-		[DSO_BINARY_TYPE__FEDORA_DEBUGINFO]	= 'f',
-		[DSO_BINARY_TYPE__UBUNTU_DEBUGINFO]	= 'u',
-		[DSO_BINARY_TYPE__BUILDID_DEBUGINFO]	= 'b',
-		[DSO_BINARY_TYPE__SYSTEM_PATH_DSO]	= 'd',
-		[DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE]	= 'K',
-		[DSO_BINARY_TYPE__GUEST_KALLSYMS]	= 'g',
-		[DSO_BINARY_TYPE__GUEST_KMODULE]	= 'G',
-		[DSO_BINARY_TYPE__GUEST_VMLINUX]	= 'V',
+		[DSO_BINARY_TYPE__KALLSYMS]			= 'k',
+		[DSO_BINARY_TYPE__VMLINUX]			= 'v',
+		[DSO_BINARY_TYPE__JAVA_JIT]			= 'j',
+		[DSO_BINARY_TYPE__DEBUGLINK]			= 'l',
+		[DSO_BINARY_TYPE__BUILD_ID_CACHE]		= 'B',
+		[DSO_BINARY_TYPE__FEDORA_DEBUGINFO]		= 'f',
+		[DSO_BINARY_TYPE__UBUNTU_DEBUGINFO]		= 'u',
+		[DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO]	= 'o',
+		[DSO_BINARY_TYPE__BUILDID_DEBUGINFO]		= 'b',
+		[DSO_BINARY_TYPE__SYSTEM_PATH_DSO]		= 'd',
+		[DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE]		= 'K',
+		[DSO_BINARY_TYPE__GUEST_KALLSYMS]		= 'g',
+		[DSO_BINARY_TYPE__GUEST_KMODULE]		= 'G',
+		[DSO_BINARY_TYPE__GUEST_VMLINUX]		= 'V',
 	};
 
 	if (dso == NULL || dso->symtab_type == DSO_BINARY_TYPE__NOT_FOUND)
@@ -64,6 +65,28 @@
 			 symbol_conf.symfs, dso->long_name);
 		break;
 
+	case DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO:
+	{
+		char *last_slash;
+		size_t len;
+		size_t dir_size;
+
+		last_slash = dso->long_name + dso->long_name_len;
+		while (last_slash != dso->long_name && *last_slash != '/')
+			last_slash--;
+
+		len = scnprintf(file, size, "%s", symbol_conf.symfs);
+		dir_size = last_slash - dso->long_name + 2;
+		if (dir_size > (size - len)) {
+			ret = -1;
+			break;
+		}
+		len += scnprintf(file + len, dir_size, "%s",  dso->long_name);
+		len += scnprintf(file + len , size - len, ".debug%s",
+								last_slash);
+		break;
+	}
+
 	case DSO_BINARY_TYPE__BUILDID_DEBUGINFO:
 		if (!dso->has_build_id) {
 			ret = -1;
@@ -427,6 +450,7 @@
 		dso->rel = 0;
 		dso->sorted_by_name = 0;
 		dso->has_build_id = 0;
+		dso->has_srcline = 1;
 		dso->kernel = DSO_TYPE_USER;
 		dso->needs_swap = DSO_SWAP__UNSET;
 		INIT_LIST_HEAD(&dso->node);
diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h
index b793053..9ac666a 100644
--- a/tools/perf/util/dso.h
+++ b/tools/perf/util/dso.h
@@ -6,6 +6,7 @@
 #include <stdbool.h>
 #include "types.h"
 #include "map.h"
+#include "build-id.h"
 
 enum dso_binary_type {
 	DSO_BINARY_TYPE__KALLSYMS = 0,
@@ -23,6 +24,7 @@
 	DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE,
 	DSO_BINARY_TYPE__KCORE,
 	DSO_BINARY_TYPE__GUEST_KCORE,
+	DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
 	DSO_BINARY_TYPE__NOT_FOUND,
 };
 
@@ -81,6 +83,7 @@
 	enum dso_binary_type	data_type;
 	u8		 adjust_symbols:1;
 	u8		 has_build_id:1;
+	u8		 has_srcline:1;
 	u8		 hit:1;
 	u8		 annotate_warned:1;
 	u8		 sname_alloc:1;
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 49096ea..ec9ae11 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -512,18 +512,18 @@
 
 int perf_event__process_comm(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
-			     struct perf_sample *sample __maybe_unused,
+			     struct perf_sample *sample,
 			     struct machine *machine)
 {
-	return machine__process_comm_event(machine, event);
+	return machine__process_comm_event(machine, event, sample);
 }
 
 int perf_event__process_lost(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
-			     struct perf_sample *sample __maybe_unused,
+			     struct perf_sample *sample,
 			     struct machine *machine)
 {
-	return machine__process_lost_event(machine, event);
+	return machine__process_lost_event(machine, event, sample);
 }
 
 size_t perf_event__fprintf_mmap(union perf_event *event, FILE *fp)
@@ -546,18 +546,18 @@
 
 int perf_event__process_mmap(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
-			     struct perf_sample *sample __maybe_unused,
+			     struct perf_sample *sample,
 			     struct machine *machine)
 {
-	return machine__process_mmap_event(machine, event);
+	return machine__process_mmap_event(machine, event, sample);
 }
 
 int perf_event__process_mmap2(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
-			     struct perf_sample *sample __maybe_unused,
+			     struct perf_sample *sample,
 			     struct machine *machine)
 {
-	return machine__process_mmap2_event(machine, event);
+	return machine__process_mmap2_event(machine, event, sample);
 }
 
 size_t perf_event__fprintf_task(union perf_event *event, FILE *fp)
@@ -569,18 +569,18 @@
 
 int perf_event__process_fork(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
-			     struct perf_sample *sample __maybe_unused,
+			     struct perf_sample *sample,
 			     struct machine *machine)
 {
-	return machine__process_fork_event(machine, event);
+	return machine__process_fork_event(machine, event, sample);
 }
 
 int perf_event__process_exit(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
-			     struct perf_sample *sample __maybe_unused,
+			     struct perf_sample *sample,
 			     struct machine *machine)
 {
-	return machine__process_exit_event(machine, event);
+	return machine__process_exit_event(machine, event, sample);
 }
 
 size_t perf_event__fprintf(union perf_event *event, FILE *fp)
@@ -611,21 +611,21 @@
 
 int perf_event__process(struct perf_tool *tool __maybe_unused,
 			union perf_event *event,
-			struct perf_sample *sample __maybe_unused,
+			struct perf_sample *sample,
 			struct machine *machine)
 {
-	return machine__process_event(machine, event);
+	return machine__process_event(machine, event, sample);
 }
 
-void thread__find_addr_map(struct thread *self,
+void thread__find_addr_map(struct thread *thread,
 			   struct machine *machine, u8 cpumode,
 			   enum map_type type, u64 addr,
 			   struct addr_location *al)
 {
-	struct map_groups *mg = &self->mg;
+	struct map_groups *mg = &thread->mg;
 	bool load_map = false;
 
-	al->thread = self;
+	al->thread = thread;
 	al->addr = addr;
 	al->cpumode = cpumode;
 	al->filtered = false;
@@ -721,10 +721,10 @@
 		return -1;
 
 	if (symbol_conf.comm_list &&
-	    !strlist__has_entry(symbol_conf.comm_list, thread->comm))
+	    !strlist__has_entry(symbol_conf.comm_list, thread__comm_str(thread)))
 		goto out_filtered;
 
-	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->tid);
+	dump_printf(" ... thread: %s:%d\n", thread__comm_str(thread), thread->tid);
 	/*
 	 * Have we already created the kernel maps for this machine?
 	 *
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index c67ecc4..f8d70f3 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -61,6 +61,12 @@
 	u64 id;
 };
 
+struct throttle_event {
+	struct perf_event_header header;
+	u64 time;
+	u64 id;
+	u64 stream_id;
+};
 
 #define PERF_SAMPLE_MASK				\
 	(PERF_SAMPLE_IP | PERF_SAMPLE_TID |		\
@@ -69,6 +75,9 @@
 	 PERF_SAMPLE_CPU | PERF_SAMPLE_PERIOD |		\
 	 PERF_SAMPLE_IDENTIFIER)
 
+/* perf sample has 16 bits size limit */
+#define PERF_SAMPLE_MAX_SIZE (1 << 16)
+
 struct sample_event {
 	struct perf_event_header        header;
 	u64 array[];
@@ -111,6 +120,7 @@
 	u64 stream_id;
 	u64 period;
 	u64 weight;
+	u64 transaction;
 	u32 cpu;
 	u32 raw_size;
 	u64 data_src;
@@ -177,6 +187,7 @@
 	struct fork_event		fork;
 	struct lost_event		lost;
 	struct read_event		read;
+	struct throttle_event		throttle;
 	struct sample_event		sample;
 	struct attr_event		attr;
 	struct event_type_event		event_type;
@@ -240,7 +251,8 @@
 			struct machine *machine);
 
 struct addr_location;
-int perf_event__preprocess_sample(const union perf_event *self,
+
+int perf_event__preprocess_sample(const union perf_event *event,
 				  struct machine *machine,
 				  struct addr_location *al,
 				  struct perf_sample *sample);
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index e584cd3..b939221 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -18,6 +18,7 @@
 #include <unistd.h>
 
 #include "parse-events.h"
+#include "parse-options.h"
 
 #include <sys/mman.h>
 
@@ -49,6 +50,18 @@
 	return evlist;
 }
 
+struct perf_evlist *perf_evlist__new_default(void)
+{
+	struct perf_evlist *evlist = perf_evlist__new();
+
+	if (evlist && perf_evlist__add_default(evlist)) {
+		perf_evlist__delete(evlist);
+		evlist = NULL;
+	}
+
+	return evlist;
+}
+
 /**
  * perf_evlist__set_id_pos - set the positions of event ids.
  * @evlist: selected event list
@@ -242,7 +255,7 @@
 	if (evsel == NULL)
 		return -1;
 
-	evsel->handler.func = handler;
+	evsel->handler = handler;
 	perf_evlist__add(evlist, evsel);
 	return 0;
 }
@@ -527,7 +540,7 @@
 		if ((old & md->mask) + size != ((old + size) & md->mask)) {
 			unsigned int offset = old;
 			unsigned int len = min(sizeof(*event), size), cpy;
-			void *dst = &md->event_copy;
+			void *dst = md->event_copy;
 
 			do {
 				cpy = min(md->mask + 1 - (offset & md->mask), len);
@@ -537,7 +550,7 @@
 				len -= cpy;
 			} while (len);
 
-			event = &md->event_copy;
+			event = (union perf_event *) md->event_copy;
 		}
 
 		old += size;
@@ -594,6 +607,8 @@
 	evlist->mmap[idx].base = mmap(NULL, evlist->mmap_len, prot,
 				      MAP_SHARED, fd, 0);
 	if (evlist->mmap[idx].base == MAP_FAILED) {
+		pr_debug2("failed to mmap perf event ring buffer, error %d\n",
+			  errno);
 		evlist->mmap[idx].base = NULL;
 		return -1;
 	}
@@ -602,9 +617,36 @@
 	return 0;
 }
 
-static int perf_evlist__mmap_per_cpu(struct perf_evlist *evlist, int prot, int mask)
+static int perf_evlist__mmap_per_evsel(struct perf_evlist *evlist, int idx,
+				       int prot, int mask, int cpu, int thread,
+				       int *output)
 {
 	struct perf_evsel *evsel;
+
+	list_for_each_entry(evsel, &evlist->entries, node) {
+		int fd = FD(evsel, cpu, thread);
+
+		if (*output == -1) {
+			*output = fd;
+			if (__perf_evlist__mmap(evlist, idx, prot, mask,
+						*output) < 0)
+				return -1;
+		} else {
+			if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT, *output) != 0)
+				return -1;
+		}
+
+		if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
+		    perf_evlist__id_add_fd(evlist, evsel, cpu, thread, fd) < 0)
+			return -1;
+	}
+
+	return 0;
+}
+
+static int perf_evlist__mmap_per_cpu(struct perf_evlist *evlist, int prot,
+				     int mask)
+{
 	int cpu, thread;
 	int nr_cpus = cpu_map__nr(evlist->cpus);
 	int nr_threads = thread_map__nr(evlist->threads);
@@ -614,23 +656,9 @@
 		int output = -1;
 
 		for (thread = 0; thread < nr_threads; thread++) {
-			list_for_each_entry(evsel, &evlist->entries, node) {
-				int fd = FD(evsel, cpu, thread);
-
-				if (output == -1) {
-					output = fd;
-					if (__perf_evlist__mmap(evlist, cpu,
-								prot, mask, output) < 0)
-						goto out_unmap;
-				} else {
-					if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT, output) != 0)
-						goto out_unmap;
-				}
-
-				if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
-				    perf_evlist__id_add_fd(evlist, evsel, cpu, thread, fd) < 0)
-					goto out_unmap;
-			}
+			if (perf_evlist__mmap_per_evsel(evlist, cpu, prot, mask,
+							cpu, thread, &output))
+				goto out_unmap;
 		}
 	}
 
@@ -642,9 +670,9 @@
 	return -1;
 }
 
-static int perf_evlist__mmap_per_thread(struct perf_evlist *evlist, int prot, int mask)
+static int perf_evlist__mmap_per_thread(struct perf_evlist *evlist, int prot,
+					int mask)
 {
-	struct perf_evsel *evsel;
 	int thread;
 	int nr_threads = thread_map__nr(evlist->threads);
 
@@ -652,23 +680,9 @@
 	for (thread = 0; thread < nr_threads; thread++) {
 		int output = -1;
 
-		list_for_each_entry(evsel, &evlist->entries, node) {
-			int fd = FD(evsel, 0, thread);
-
-			if (output == -1) {
-				output = fd;
-				if (__perf_evlist__mmap(evlist, thread,
-							prot, mask, output) < 0)
-					goto out_unmap;
-			} else {
-				if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT, output) != 0)
-					goto out_unmap;
-			}
-
-			if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
-			    perf_evlist__id_add_fd(evlist, evsel, 0, thread, fd) < 0)
-				goto out_unmap;
-		}
+		if (perf_evlist__mmap_per_evsel(evlist, thread, prot, mask, 0,
+						thread, &output))
+			goto out_unmap;
 	}
 
 	return 0;
@@ -679,20 +693,76 @@
 	return -1;
 }
 
-/** perf_evlist__mmap - Create per cpu maps to receive events
+static size_t perf_evlist__mmap_size(unsigned long pages)
+{
+	/* 512 kiB: default amount of unprivileged mlocked memory */
+	if (pages == UINT_MAX)
+		pages = (512 * 1024) / page_size;
+	else if (!is_power_of_2(pages))
+		return 0;
+
+	return (pages + 1) * page_size;
+}
+
+int perf_evlist__parse_mmap_pages(const struct option *opt, const char *str,
+				  int unset __maybe_unused)
+{
+	unsigned int *mmap_pages = opt->value;
+	unsigned long pages, val;
+	size_t size;
+	static struct parse_tag tags[] = {
+		{ .tag  = 'B', .mult = 1       },
+		{ .tag  = 'K', .mult = 1 << 10 },
+		{ .tag  = 'M', .mult = 1 << 20 },
+		{ .tag  = 'G', .mult = 1 << 30 },
+		{ .tag  = 0 },
+	};
+
+	val = parse_tag_value(str, tags);
+	if (val != (unsigned long) -1) {
+		/* we got file size value */
+		pages = PERF_ALIGN(val, page_size) / page_size;
+		if (pages < (1UL << 31) && !is_power_of_2(pages)) {
+			pages = next_pow2(pages);
+			pr_info("rounding mmap pages size to %lu (%lu pages)\n",
+				pages * page_size, pages);
+		}
+	} else {
+		/* we got pages count value */
+		char *eptr;
+		pages = strtoul(str, &eptr, 10);
+		if (*eptr != '\0') {
+			pr_err("failed to parse --mmap_pages/-m value\n");
+			return -1;
+		}
+	}
+
+	if (pages > UINT_MAX || pages > SIZE_MAX / page_size) {
+		pr_err("--mmap_pages/-m value too big\n");
+		return -1;
+	}
+
+	size = perf_evlist__mmap_size(pages);
+	if (!size) {
+		pr_err("--mmap_pages/-m value must be a power of two.");
+		return -1;
+	}
+
+	*mmap_pages = pages;
+	return 0;
+}
+
+/**
+ * perf_evlist__mmap - Create mmaps to receive events.
+ * @evlist: list of events
+ * @pages: map length in pages
+ * @overwrite: overwrite older events?
  *
- * @evlist - list of events
- * @pages - map length in pages
- * @overwrite - overwrite older events?
+ * If @overwrite is %false the user needs to signal event consumption using
+ * perf_mmap__write_tail().  Using perf_evlist__mmap_read() does this
+ * automatically.
  *
- * If overwrite is false the user needs to signal event consuption using:
- *
- *	struct perf_mmap *m = &evlist->mmap[cpu];
- *	unsigned int head = perf_mmap__read_head(m);
- *
- *	perf_mmap__write_tail(m, head)
- *
- * Using perf_evlist__read_on_cpu does this automatically.
+ * Return: %0 on success, negative error code otherwise.
  */
 int perf_evlist__mmap(struct perf_evlist *evlist, unsigned int pages,
 		      bool overwrite)
@@ -702,14 +772,6 @@
 	const struct thread_map *threads = evlist->threads;
 	int prot = PROT_READ | (overwrite ? 0 : PROT_WRITE), mask;
 
-        /* 512 kiB: default amount of unprivileged mlocked memory */
-        if (pages == UINT_MAX)
-                pages = (512 * 1024) / page_size;
-	else if (!is_power_of_2(pages))
-		return -EINVAL;
-
-	mask = pages * page_size - 1;
-
 	if (evlist->mmap == NULL && perf_evlist__alloc_mmap(evlist) < 0)
 		return -ENOMEM;
 
@@ -717,7 +779,9 @@
 		return -ENOMEM;
 
 	evlist->overwrite = overwrite;
-	evlist->mmap_len = (pages + 1) * page_size;
+	evlist->mmap_len = perf_evlist__mmap_size(pages);
+	pr_debug("mmap size %zuB\n", evlist->mmap_len);
+	mask = evlist->mmap_len - page_size - 1;
 
 	list_for_each_entry(evsel, &evlist->entries, node) {
 		if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
@@ -1073,3 +1137,66 @@
 
 	return printed + fprintf(fp, "\n");;
 }
+
+int perf_evlist__strerror_tp(struct perf_evlist *evlist __maybe_unused,
+			     int err, char *buf, size_t size)
+{
+	char sbuf[128];
+
+	switch (err) {
+	case ENOENT:
+		scnprintf(buf, size, "%s",
+			  "Error:\tUnable to find debugfs\n"
+			  "Hint:\tWas your kernel was compiled with debugfs support?\n"
+			  "Hint:\tIs the debugfs filesystem mounted?\n"
+			  "Hint:\tTry 'sudo mount -t debugfs nodev /sys/kernel/debug'");
+		break;
+	case EACCES:
+		scnprintf(buf, size,
+			  "Error:\tNo permissions to read %s/tracing/events/raw_syscalls\n"
+			  "Hint:\tTry 'sudo mount -o remount,mode=755 %s'\n",
+			  debugfs_mountpoint, debugfs_mountpoint);
+		break;
+	default:
+		scnprintf(buf, size, "%s", strerror_r(err, sbuf, sizeof(sbuf)));
+		break;
+	}
+
+	return 0;
+}
+
+int perf_evlist__strerror_open(struct perf_evlist *evlist __maybe_unused,
+			       int err, char *buf, size_t size)
+{
+	int printed, value;
+	char sbuf[128], *emsg = strerror_r(err, sbuf, sizeof(sbuf));
+
+	switch (err) {
+	case EACCES:
+	case EPERM:
+		printed = scnprintf(buf, size,
+				    "Error:\t%s.\n"
+				    "Hint:\tCheck /proc/sys/kernel/perf_event_paranoid setting.", emsg);
+
+		if (filename__read_int("/proc/sys/kernel/perf_event_paranoid", &value))
+			break;
+
+		printed += scnprintf(buf + printed, size - printed, "\nHint:\t");
+
+		if (value >= 2) {
+			printed += scnprintf(buf + printed, size - printed,
+					     "For your workloads it needs to be <= 1\nHint:\t");
+		}
+		printed += scnprintf(buf + printed, size - printed,
+				     "For system wide tracing it needs to be set to -1");
+
+		printed += scnprintf(buf + printed, size - printed,
+				    ".\nHint:\tThe current value is %d.", value);
+		break;
+	default:
+		scnprintf(buf, size, "%s", emsg);
+		break;
+	}
+
+	return 0;
+}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 206d093..ecaa582 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -21,7 +21,7 @@
 	void		 *base;
 	int		 mask;
 	unsigned int	 prev;
-	union perf_event event_copy;
+	char		 event_copy[PERF_SAMPLE_MAX_SIZE];
 };
 
 struct perf_evlist {
@@ -31,7 +31,7 @@
 	int		 nr_groups;
 	int		 nr_fds;
 	int		 nr_mmaps;
-	int		 mmap_len;
+	size_t		 mmap_len;
 	int		 id_pos;
 	int		 is_pos;
 	u64		 combined_sample_type;
@@ -53,6 +53,7 @@
 };
 
 struct perf_evlist *perf_evlist__new(void);
+struct perf_evlist *perf_evlist__new_default(void);
 void perf_evlist__init(struct perf_evlist *evlist, struct cpu_map *cpus,
 		       struct thread_map *threads);
 void perf_evlist__exit(struct perf_evlist *evlist);
@@ -87,7 +88,7 @@
 
 struct perf_sample_id *perf_evlist__id2sid(struct perf_evlist *evlist, u64 id);
 
-union perf_event *perf_evlist__mmap_read(struct perf_evlist *self, int idx);
+union perf_event *perf_evlist__mmap_read(struct perf_evlist *evlist, int idx);
 
 void perf_evlist__mmap_consume(struct perf_evlist *evlist, int idx);
 
@@ -98,6 +99,7 @@
 bool perf_can_sample_identifier(void);
 void perf_evlist__config(struct perf_evlist *evlist,
 			 struct perf_record_opts *opts);
+int perf_record_opts__config(struct perf_record_opts *opts);
 
 int perf_evlist__prepare_workload(struct perf_evlist *evlist,
 				  struct perf_target *target,
@@ -105,6 +107,10 @@
 				  bool want_signal);
 int perf_evlist__start_workload(struct perf_evlist *evlist);
 
+int perf_evlist__parse_mmap_pages(const struct option *opt,
+				  const char *str,
+				  int unset);
+
 int perf_evlist__mmap(struct perf_evlist *evlist, unsigned int pages,
 		      bool overwrite);
 void perf_evlist__munmap(struct perf_evlist *evlist);
@@ -165,10 +171,13 @@
 
 size_t perf_evlist__fprintf(struct perf_evlist *evlist, FILE *fp);
 
+int perf_evlist__strerror_tp(struct perf_evlist *evlist, int err, char *buf, size_t size);
+int perf_evlist__strerror_open(struct perf_evlist *evlist, int err, char *buf, size_t size);
+
 static inline unsigned int perf_mmap__read_head(struct perf_mmap *mm)
 {
 	struct perf_event_mmap_page *pc = mm->base;
-	int head = pc->data_head;
+	int head = ACCESS_ONCE(pc->data_head);
 	rmb();
 	return head;
 }
@@ -181,7 +190,7 @@
 	/*
 	 * ensure all reads are done before we write the tail out.
 	 */
-	/* mb(); */
+	mb();
 	pc->data_tail = tail;
 }
 
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 9f1ef9b..5280820 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -663,7 +663,7 @@
 	}
 
 	if (opts->sample_address)
-		attr->sample_type	|= PERF_SAMPLE_DATA_SRC;
+		perf_evsel__set_sample_bit(evsel, DATA_SRC);
 
 	if (opts->no_delay) {
 		attr->watermark = 0;
@@ -675,11 +675,14 @@
 	}
 
 	if (opts->sample_weight)
-		attr->sample_type	|= PERF_SAMPLE_WEIGHT;
+		perf_evsel__set_sample_bit(evsel, WEIGHT);
 
 	attr->mmap  = track;
 	attr->comm  = track;
 
+	if (opts->sample_transaction)
+		perf_evsel__set_sample_bit(evsel, TRANSACTION);
+
 	/*
 	 * XXX see the function comment above
 	 *
@@ -982,6 +985,7 @@
 	ret += PRINT_ATTR2(exclude_host, exclude_guest);
 	ret += PRINT_ATTR2N("excl.callchain_kern", exclude_callchain_kernel,
 			    "excl.callchain_user", exclude_callchain_user);
+	ret += PRINT_ATTR_U32(mmap2);
 
 	ret += PRINT_ATTR_U32(wakeup_events);
 	ret += PRINT_ATTR_U32(wakeup_watermark);
@@ -1047,6 +1051,8 @@
 								     group_fd, flags);
 			if (FD(evsel, cpu, thread) < 0) {
 				err = -errno;
+				pr_debug2("perf_event_open failed, error %d\n",
+					  err);
 				goto try_fallback;
 			}
 			set_rlimit = NO_CHANGE;
@@ -1213,6 +1219,7 @@
 
 		sample->pid = u.val32[0];
 		sample->tid = u.val32[1];
+		array--;
 	}
 
 	return 0;
@@ -1452,6 +1459,9 @@
 			array = (void *)array + sz;
 			OVERFLOW_CHECK_u64(array);
 			data->user_stack.size = *array++;
+			if (WARN_ONCE(data->user_stack.size > sz,
+				      "user stack dump failure\n"))
+				return -EFAULT;
 		}
 	}
 
@@ -1469,6 +1479,13 @@
 		array++;
 	}
 
+	data->transaction = 0;
+	if (type & PERF_SAMPLE_TRANSACTION) {
+		OVERFLOW_CHECK_u64(array);
+		data->transaction = *array;
+		array++;
+	}
+
 	return 0;
 }
 
@@ -1561,6 +1578,9 @@
 	if (type & PERF_SAMPLE_DATA_SRC)
 		result += sizeof(u64);
 
+	if (type & PERF_SAMPLE_TRANSACTION)
+		result += sizeof(u64);
+
 	return result;
 }
 
@@ -1734,6 +1754,11 @@
 		array++;
 	}
 
+	if (type & PERF_SAMPLE_TRANSACTION) {
+		*array = sample->transaction;
+		array++;
+	}
+
 	return 0;
 }
 
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 4a7bdc7..64ec8e1 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -74,10 +74,7 @@
 		off_t		id_offset;
 	};
 	struct cgroup_sel	*cgrp;
-	struct {
-		void		*func;
-		void		*data;
-	} handler;
+	void			*handler;
 	struct cpu_map		*cpus;
 	unsigned int		sample_size;
 	int			id_pos;
@@ -197,6 +194,12 @@
 	       (e1->attr.config == e2->attr.config);
 }
 
+#define perf_evsel__cmp(a, b)			\
+	((a) &&					\
+	 (b) &&					\
+	 (a)->attr.type == (b)->attr.type &&	\
+	 (a)->attr.config == (b)->attr.config)
+
 int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,
 			      int cpu, int thread, bool scale);
 
diff --git a/tools/perf/util/fs.c b/tools/perf/util/fs.c
new file mode 100644
index 0000000..f5be1f2
--- /dev/null
+++ b/tools/perf/util/fs.c
@@ -0,0 +1,119 @@
+
+/* TODO merge/factor into tools/lib/lk/debugfs.c */
+
+#include "util.h"
+#include "util/fs.h"
+
+static const char * const sysfs__fs_known_mountpoints[] = {
+	"/sys",
+	0,
+};
+
+static const char * const procfs__known_mountpoints[] = {
+	"/proc",
+	0,
+};
+
+struct fs {
+	const char		*name;
+	const char * const	*mounts;
+	char			 path[PATH_MAX + 1];
+	bool			 found;
+	long			 magic;
+};
+
+enum {
+	FS__SYSFS  = 0,
+	FS__PROCFS = 1,
+};
+
+static struct fs fs__entries[] = {
+	[FS__SYSFS] = {
+		.name	= "sysfs",
+		.mounts	= sysfs__fs_known_mountpoints,
+		.magic	= SYSFS_MAGIC,
+	},
+	[FS__PROCFS] = {
+		.name	= "proc",
+		.mounts	= procfs__known_mountpoints,
+		.magic	= PROC_SUPER_MAGIC,
+	},
+};
+
+static bool fs__read_mounts(struct fs *fs)
+{
+	bool found = false;
+	char type[100];
+	FILE *fp;
+
+	fp = fopen("/proc/mounts", "r");
+	if (fp == NULL)
+		return NULL;
+
+	while (!found &&
+	       fscanf(fp, "%*s %" STR(PATH_MAX) "s %99s %*s %*d %*d\n",
+		      fs->path, type) == 2) {
+
+		if (strcmp(type, fs->name) == 0)
+			found = true;
+	}
+
+	fclose(fp);
+	return fs->found = found;
+}
+
+static int fs__valid_mount(const char *fs, long magic)
+{
+	struct statfs st_fs;
+
+	if (statfs(fs, &st_fs) < 0)
+		return -ENOENT;
+	else if (st_fs.f_type != magic)
+		return -ENOENT;
+
+	return 0;
+}
+
+static bool fs__check_mounts(struct fs *fs)
+{
+	const char * const *ptr;
+
+	ptr = fs->mounts;
+	while (*ptr) {
+		if (fs__valid_mount(*ptr, fs->magic) == 0) {
+			fs->found = true;
+			strcpy(fs->path, *ptr);
+			return true;
+		}
+		ptr++;
+	}
+
+	return false;
+}
+
+static const char *fs__get_mountpoint(struct fs *fs)
+{
+	if (fs__check_mounts(fs))
+		return fs->path;
+
+	return fs__read_mounts(fs) ? fs->path : NULL;
+}
+
+static const char *fs__mountpoint(int idx)
+{
+	struct fs *fs = &fs__entries[idx];
+
+	if (fs->found)
+		return (const char *)fs->path;
+
+	return fs__get_mountpoint(fs);
+}
+
+#define FS__MOUNTPOINT(name, idx)	\
+const char *name##__mountpoint(void)	\
+{					\
+	return fs__mountpoint(idx);	\
+}
+
+FS__MOUNTPOINT(sysfs,  FS__SYSFS);
+FS__MOUNTPOINT(procfs, FS__PROCFS);
diff --git a/tools/perf/util/fs.h b/tools/perf/util/fs.h
new file mode 100644
index 0000000..5e09ce1
--- /dev/null
+++ b/tools/perf/util/fs.h
@@ -0,0 +1,7 @@
+#ifndef __PERF_FS
+#define __PERF_FS
+
+const char *sysfs__mountpoint(void);
+const char *procfs__mountpoint(void);
+
+#endif /* __PERF_FS */
diff --git a/tools/perf/util/generate-cmdlist.sh b/tools/perf/util/generate-cmdlist.sh
index 3ac3803..36a885d 100755
--- a/tools/perf/util/generate-cmdlist.sh
+++ b/tools/perf/util/generate-cmdlist.sh
@@ -22,7 +22,7 @@
      }' "Documentation/perf-$cmd.txt"
 done
 
-echo "#ifdef LIBELF_SUPPORT"
+echo "#ifdef HAVE_LIBELF_SUPPORT"
 sed -n -e 's/^perf-\([^ 	]*\)[ 	].* full.*/\1/p' command-list.txt |
 sort |
 while read cmd
@@ -35,5 +35,5 @@
 	    p
      }' "Documentation/perf-$cmd.txt"
 done
-echo "#endif /* LIBELF_SUPPORT */"
+echo "#endif /* HAVE_LIBELF_SUPPORT */"
 echo "};"
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index c3e5a3b..26d9520 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -22,6 +22,7 @@
 #include "vdso.h"
 #include "strbuf.h"
 #include "build-id.h"
+#include "data.h"
 
 static bool no_buildid_cache = false;
 
@@ -2189,7 +2190,7 @@
 {
 	struct header_print_data hd;
 	struct perf_header *header = &session->header;
-	int fd = session->fd;
+	int fd = perf_data_file__fd(session->file);
 	hd.fp = fp;
 	hd.full = full;
 
@@ -2650,7 +2651,8 @@
 	struct perf_header *header = &session->header;
 	struct perf_pipe_file_header f_header;
 
-	if (perf_file_header__read_pipe(&f_header, header, session->fd,
+	if (perf_file_header__read_pipe(&f_header, header,
+					perf_data_file__fd(session->file),
 					session->repipe) < 0) {
 		pr_debug("incompatible file format\n");
 		return -EINVAL;
@@ -2751,18 +2753,19 @@
 
 int perf_session__read_header(struct perf_session *session)
 {
+	struct perf_data_file *file = session->file;
 	struct perf_header *header = &session->header;
 	struct perf_file_header	f_header;
 	struct perf_file_attr	f_attr;
 	u64			f_id;
 	int nr_attrs, nr_ids, i, j;
-	int fd = session->fd;
+	int fd = perf_data_file__fd(file);
 
 	session->evlist = perf_evlist__new();
 	if (session->evlist == NULL)
 		return -ENOMEM;
 
-	if (session->fd_pipe)
+	if (perf_data_file__is_pipe(file))
 		return perf_header__read_pipe(session);
 
 	if (perf_file_header__read(&f_header, header, fd) < 0)
@@ -2777,7 +2780,7 @@
 	if (f_header.data.size == 0) {
 		pr_warning("WARNING: The %s file's data size field is 0 which is unexpected.\n"
 			   "Was the 'perf record' command properly terminated?\n",
-			   session->filename);
+			   file->path);
 	}
 
 	nr_attrs = f_header.attrs.size / f_header.attr_size;
@@ -2990,18 +2993,19 @@
 				     struct perf_session *session)
 {
 	ssize_t size_read, padding, size = event->tracing_data.size;
-	off_t offset = lseek(session->fd, 0, SEEK_CUR);
+	int fd = perf_data_file__fd(session->file);
+	off_t offset = lseek(fd, 0, SEEK_CUR);
 	char buf[BUFSIZ];
 
 	/* setup for reading amidst mmap */
-	lseek(session->fd, offset + sizeof(struct tracing_data_event),
+	lseek(fd, offset + sizeof(struct tracing_data_event),
 	      SEEK_SET);
 
-	size_read = trace_report(session->fd, &session->pevent,
+	size_read = trace_report(fd, &session->pevent,
 				 session->repipe);
 	padding = PERF_ALIGN(size_read, sizeof(u64)) - size_read;
 
-	if (readn(session->fd, buf, padding) < 0) {
+	if (readn(fd, buf, padding) < 0) {
 		pr_err("%s: reading input file", __func__);
 		return -1;
 	}
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 9ff6cf3..822903e 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -160,6 +160,10 @@
 	hists__new_col_len(hists, HISTC_MEM_LVL, 21 + 3);
 	hists__new_col_len(hists, HISTC_LOCAL_WEIGHT, 12);
 	hists__new_col_len(hists, HISTC_GLOBAL_WEIGHT, 12);
+
+	if (h->transaction)
+		hists__new_col_len(hists, HISTC_TRANSACTION,
+				   hist_entry__transaction_len());
 }
 
 void hists__output_recalc_col_len(struct hists *hists, int max_rows)
@@ -346,7 +350,7 @@
 	struct rb_node **p;
 	struct rb_node *parent = NULL;
 	struct hist_entry *he;
-	int cmp;
+	int64_t cmp;
 
 	p = &hists->entries_in->rb_node;
 
@@ -395,6 +399,7 @@
 	if (!he)
 		return NULL;
 
+	hists->nr_entries++;
 	rb_link_node(&he->rb_node_in, parent, p);
 	rb_insert_color(&he->rb_node_in, hists->entries_in);
 out:
@@ -402,74 +407,16 @@
 	return he;
 }
 
-struct hist_entry *__hists__add_mem_entry(struct hists *self,
-					  struct addr_location *al,
-					  struct symbol *sym_parent,
-					  struct mem_info *mi,
-					  u64 period,
-					  u64 weight)
-{
-	struct hist_entry entry = {
-		.thread	= al->thread,
-		.ms = {
-			.map	= al->map,
-			.sym	= al->sym,
-		},
-		.stat = {
-			.period	= period,
-			.weight = weight,
-			.nr_events = 1,
-		},
-		.cpu	= al->cpu,
-		.ip	= al->addr,
-		.level	= al->level,
-		.parent = sym_parent,
-		.filtered = symbol__parent_filter(sym_parent),
-		.hists = self,
-		.mem_info = mi,
-		.branch_info = NULL,
-	};
-	return add_hist_entry(self, &entry, al, period, weight);
-}
-
-struct hist_entry *__hists__add_branch_entry(struct hists *self,
-					     struct addr_location *al,
-					     struct symbol *sym_parent,
-					     struct branch_info *bi,
-					     u64 period,
-					     u64 weight)
-{
-	struct hist_entry entry = {
-		.thread	= al->thread,
-		.ms = {
-			.map	= bi->to.map,
-			.sym	= bi->to.sym,
-		},
-		.cpu	= al->cpu,
-		.ip	= bi->to.addr,
-		.level	= al->level,
-		.stat = {
-			.period	= period,
-			.nr_events = 1,
-			.weight = weight,
-		},
-		.parent = sym_parent,
-		.filtered = symbol__parent_filter(sym_parent),
-		.branch_info = bi,
-		.hists	= self,
-		.mem_info = NULL,
-	};
-
-	return add_hist_entry(self, &entry, al, period, weight);
-}
-
-struct hist_entry *__hists__add_entry(struct hists *self,
+struct hist_entry *__hists__add_entry(struct hists *hists,
 				      struct addr_location *al,
-				      struct symbol *sym_parent, u64 period,
-				      u64 weight)
+				      struct symbol *sym_parent,
+				      struct branch_info *bi,
+				      struct mem_info *mi,
+				      u64 period, u64 weight, u64 transaction)
 {
 	struct hist_entry entry = {
 		.thread	= al->thread,
+		.comm = thread__comm(al->thread),
 		.ms = {
 			.map	= al->map,
 			.sym	= al->sym,
@@ -478,18 +425,19 @@
 		.ip	= al->addr,
 		.level	= al->level,
 		.stat = {
-			.period	= period,
 			.nr_events = 1,
+			.period	= period,
 			.weight = weight,
 		},
 		.parent = sym_parent,
 		.filtered = symbol__parent_filter(sym_parent),
-		.hists	= self,
-		.branch_info = NULL,
-		.mem_info = NULL,
+		.hists	= hists,
+		.branch_info = bi,
+		.mem_info = mi,
+		.transaction = transaction,
 	};
 
-	return add_hist_entry(self, &entry, al, period, weight);
+	return add_hist_entry(hists, &entry, al, period, weight);
 }
 
 int64_t
@@ -530,6 +478,7 @@
 {
 	free(he->branch_info);
 	free(he->mem_info);
+	free_srcline(he->srcline);
 	free(he);
 }
 
@@ -598,7 +547,7 @@
 	hists__filter_entry_by_symbol(hists, he);
 }
 
-void hists__collapse_resort(struct hists *hists)
+void hists__collapse_resort(struct hists *hists, struct ui_progress *prog)
 {
 	struct rb_root *root;
 	struct rb_node *next;
@@ -625,6 +574,8 @@
 			 */
 			hists__apply_filters(hists, n);
 		}
+		if (prog)
+			ui_progress__update(prog, 1);
 	}
 }
 
@@ -884,7 +835,7 @@
 	struct rb_node **p;
 	struct rb_node *parent = NULL;
 	struct hist_entry *he;
-	int cmp;
+	int64_t cmp;
 
 	if (sort__need_collapse)
 		root = &hists->entries_collapsed;
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index ce8dc61..b621347a 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -6,6 +6,7 @@
 #include "callchain.h"
 #include "header.h"
 #include "color.h"
+#include "ui/progress.h"
 
 extern struct callchain_param callchain_param;
 
@@ -46,6 +47,8 @@
 	HISTC_CPU,
 	HISTC_SRCLINE,
 	HISTC_MISPREDICT,
+	HISTC_IN_TX,
+	HISTC_ABORT,
 	HISTC_SYMBOL_FROM,
 	HISTC_SYMBOL_TO,
 	HISTC_DSO_FROM,
@@ -58,6 +61,7 @@
 	HISTC_MEM_TLB,
 	HISTC_MEM_LVL,
 	HISTC_MEM_SNOOP,
+	HISTC_TRANSACTION,
 	HISTC_NR_COLS, /* Last entry */
 };
 
@@ -80,54 +84,43 @@
 	u16			col_len[HISTC_NR_COLS];
 };
 
-struct hist_entry *__hists__add_entry(struct hists *self,
+struct hist_entry *__hists__add_entry(struct hists *hists,
 				      struct addr_location *al,
-				      struct symbol *parent, u64 period,
-				      u64 weight);
+				      struct symbol *parent,
+				      struct branch_info *bi,
+				      struct mem_info *mi, u64 period,
+				      u64 weight, u64 transaction);
 int64_t hist_entry__cmp(struct hist_entry *left, struct hist_entry *right);
 int64_t hist_entry__collapse(struct hist_entry *left, struct hist_entry *right);
-int hist_entry__sort_snprintf(struct hist_entry *self, char *bf, size_t size,
+int hist_entry__transaction_len(void);
+int hist_entry__sort_snprintf(struct hist_entry *he, char *bf, size_t size,
 			      struct hists *hists);
 void hist_entry__free(struct hist_entry *);
 
-struct hist_entry *__hists__add_branch_entry(struct hists *self,
-					     struct addr_location *al,
-					     struct symbol *sym_parent,
-					     struct branch_info *bi,
-					     u64 period,
-					     u64 weight);
-
-struct hist_entry *__hists__add_mem_entry(struct hists *self,
-					  struct addr_location *al,
-					  struct symbol *sym_parent,
-					  struct mem_info *mi,
-					  u64 period,
-					  u64 weight);
-
-void hists__output_resort(struct hists *self);
-void hists__collapse_resort(struct hists *self);
+void hists__output_resort(struct hists *hists);
+void hists__collapse_resort(struct hists *hists, struct ui_progress *prog);
 
 void hists__decay_entries(struct hists *hists, bool zap_user, bool zap_kernel);
 void hists__output_recalc_col_len(struct hists *hists, int max_rows);
 
 void hists__inc_nr_entries(struct hists *hists, struct hist_entry *h);
-void hists__inc_nr_events(struct hists *self, u32 type);
+void hists__inc_nr_events(struct hists *hists, u32 type);
 void events_stats__inc(struct events_stats *stats, u32 type);
 size_t events_stats__fprintf(struct events_stats *stats, FILE *fp);
 
-size_t hists__fprintf(struct hists *self, bool show_header, int max_rows,
+size_t hists__fprintf(struct hists *hists, bool show_header, int max_rows,
 		      int max_cols, float min_pcnt, FILE *fp);
 
-int hist_entry__inc_addr_samples(struct hist_entry *self, int evidx, u64 addr);
-int hist_entry__annotate(struct hist_entry *self, size_t privsize);
+int hist_entry__inc_addr_samples(struct hist_entry *he, int evidx, u64 addr);
+int hist_entry__annotate(struct hist_entry *he, size_t privsize);
 
 void hists__filter_by_dso(struct hists *hists);
 void hists__filter_by_thread(struct hists *hists);
 void hists__filter_by_symbol(struct hists *hists);
 
-u16 hists__col_len(struct hists *self, enum hist_column col);
-void hists__set_col_len(struct hists *self, enum hist_column col, u16 len);
-bool hists__new_col_len(struct hists *self, enum hist_column col, u16 len);
+u16 hists__col_len(struct hists *hists, enum hist_column col);
+void hists__set_col_len(struct hists *hists, enum hist_column col, u16 len);
+bool hists__new_col_len(struct hists *hists, enum hist_column col, u16 len);
 void hists__reset_col_len(struct hists *hists);
 void hists__calc_col_len(struct hists *hists, struct hist_entry *he);
 
@@ -196,7 +189,7 @@
 	int refresh;
 };
 
-#ifdef SLANG_SUPPORT
+#ifdef HAVE_SLANG_SUPPORT
 #include "../ui/keysyms.h"
 int hist_entry__tui_annotate(struct hist_entry *he, struct perf_evsel *evsel,
 			     struct hist_browser_timer *hbt);
@@ -217,12 +210,9 @@
 	return 0;
 }
 
-static inline int hist_entry__tui_annotate(struct hist_entry *self
-					   __maybe_unused,
-					   struct perf_evsel *evsel
-					   __maybe_unused,
-					   struct hist_browser_timer *hbt
-					   __maybe_unused)
+static inline int hist_entry__tui_annotate(struct hist_entry *he __maybe_unused,
+					   struct perf_evsel *evsel __maybe_unused,
+					   struct hist_browser_timer *hbt __maybe_unused)
 {
 	return 0;
 }
@@ -237,20 +227,5 @@
 #define K_SWITCH_INPUT_DATA -3000
 #endif
 
-#ifdef GTK2_SUPPORT
-int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist, const char *help,
-				  struct hist_browser_timer *hbt __maybe_unused,
-				  float min_pcnt);
-#else
-static inline
-int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist __maybe_unused,
-				  const char *help __maybe_unused,
-				  struct hist_browser_timer *hbt __maybe_unused,
-				  float min_pcnt __maybe_unused)
-{
-	return 0;
-}
-#endif
-
-unsigned int hists__sort_list_width(struct hists *self);
+unsigned int hists__sort_list_width(struct hists *hists);
 #endif	/* __PERF_HIST_H */
diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h
index cf6727e..8f14965 100644
--- a/tools/perf/util/include/dwarf-regs.h
+++ b/tools/perf/util/include/dwarf-regs.h
@@ -1,7 +1,7 @@
 #ifndef _PERF_DWARF_REGS_H_
 #define _PERF_DWARF_REGS_H_
 
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 const char *get_arch_regstr(unsigned int n);
 #endif
 
diff --git a/tools/perf/util/include/linux/compiler.h b/tools/perf/util/include/linux/compiler.h
index 96b919d..b003ad7 100644
--- a/tools/perf/util/include/linux/compiler.h
+++ b/tools/perf/util/include/linux/compiler.h
@@ -2,20 +2,29 @@
 #define _PERF_LINUX_COMPILER_H_
 
 #ifndef __always_inline
-#define __always_inline	inline
+# define __always_inline	inline __attribute__((always_inline))
 #endif
+
 #define __user
+
 #ifndef __attribute_const__
-#define __attribute_const__
+# define __attribute_const__
 #endif
 
 #ifndef __maybe_unused
-#define __maybe_unused		__attribute__((unused))
+# define __maybe_unused		__attribute__((unused))
 #endif
-#define __packed	__attribute__((__packed__))
+
+#ifndef __packed
+# define __packed		__attribute__((__packed__))
+#endif
 
 #ifndef __force
-#define __force
+# define __force
+#endif
+
+#ifndef __weak
+# define __weak			__attribute__((weak))
 #endif
 
 #endif
diff --git a/tools/perf/util/include/linux/magic.h b/tools/perf/util/include/linux/magic.h
index 58b64ed..07d63cf 100644
--- a/tools/perf/util/include/linux/magic.h
+++ b/tools/perf/util/include/linux/magic.h
@@ -9,4 +9,8 @@
 #define SYSFS_MAGIC            0x62656572
 #endif
 
+#ifndef PROC_SUPER_MAGIC
+#define PROC_SUPER_MAGIC       0x9fa0
+#endif
+
 #endif
diff --git a/tools/perf/util/intlist.c b/tools/perf/util/intlist.c
index 11a8d86..89715b6 100644
--- a/tools/perf/util/intlist.c
+++ b/tools/perf/util/intlist.c
@@ -20,6 +20,7 @@
 
 	if (node != NULL) {
 		node->i = i;
+		node->priv = NULL;
 		rc = &node->rb_node;
 	}
 
@@ -57,22 +58,36 @@
 	rblist__remove_node(&ilist->rblist, &node->rb_node);
 }
 
-struct int_node *intlist__find(struct intlist *ilist, int i)
+static struct int_node *__intlist__findnew(struct intlist *ilist,
+					   int i, bool create)
 {
-	struct int_node *node;
+	struct int_node *node = NULL;
 	struct rb_node *rb_node;
 
 	if (ilist == NULL)
 		return NULL;
 
-	node = NULL;
-	rb_node = rblist__find(&ilist->rblist, (void *)((long)i));
+	if (create)
+		rb_node = rblist__findnew(&ilist->rblist, (void *)((long)i));
+	else
+		rb_node = rblist__find(&ilist->rblist, (void *)((long)i));
+
 	if (rb_node)
 		node = container_of(rb_node, struct int_node, rb_node);
 
 	return node;
 }
 
+struct int_node *intlist__find(struct intlist *ilist, int i)
+{
+	return __intlist__findnew(ilist, i, false);
+}
+
+struct int_node *intlist__findnew(struct intlist *ilist, int i)
+{
+	return __intlist__findnew(ilist, i, true);
+}
+
 static int intlist__parse_list(struct intlist *ilist, const char *s)
 {
 	char *sep;
diff --git a/tools/perf/util/intlist.h b/tools/perf/util/intlist.h
index 62351da..aa6877d 100644
--- a/tools/perf/util/intlist.h
+++ b/tools/perf/util/intlist.h
@@ -9,6 +9,7 @@
 struct int_node {
 	struct rb_node rb_node;
 	int i;
+	void *priv;
 };
 
 struct intlist {
@@ -23,6 +24,7 @@
 
 struct int_node *intlist__entry(const struct intlist *ilist, unsigned int idx);
 struct int_node *intlist__find(struct intlist *ilist, int i);
+struct int_node *intlist__findnew(struct intlist *ilist, int i);
 
 static inline bool intlist__has_entry(struct intlist *ilist, int i)
 {
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 6188d28..ce034c1 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -40,12 +40,29 @@
 			return -ENOMEM;
 
 		snprintf(comm, sizeof(comm), "[guest/%d]", pid);
-		thread__set_comm(thread, comm);
+		thread__set_comm(thread, comm, 0);
 	}
 
 	return 0;
 }
 
+struct machine *machine__new_host(void)
+{
+	struct machine *machine = malloc(sizeof(*machine));
+
+	if (machine != NULL) {
+		machine__init(machine, "", HOST_KERNEL_ID);
+
+		if (machine__create_kernel_maps(machine) < 0)
+			goto out_delete;
+	}
+
+	return machine;
+out_delete:
+	free(machine);
+	return NULL;
+}
+
 static void dsos__delete(struct list_head *dsos)
 {
 	struct dso *pos, *n;
@@ -314,7 +331,8 @@
 	return __machine__findnew_thread(machine, 0, tid, false);
 }
 
-int machine__process_comm_event(struct machine *machine, union perf_event *event)
+int machine__process_comm_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample)
 {
 	struct thread *thread = machine__findnew_thread(machine,
 							event->comm.pid,
@@ -323,7 +341,7 @@
 	if (dump_trace)
 		perf_event__fprintf_comm(event, stdout);
 
-	if (thread == NULL || thread__set_comm(thread, event->comm.comm)) {
+	if (thread == NULL || thread__set_comm(thread, event->comm.comm, sample->time)) {
 		dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
 		return -1;
 	}
@@ -332,7 +350,7 @@
 }
 
 int machine__process_lost_event(struct machine *machine __maybe_unused,
-				union perf_event *event)
+				union perf_event *event, struct perf_sample *sample __maybe_unused)
 {
 	dump_printf(": id:%" PRIu64 ": lost:%" PRIu64 "\n",
 		    event->lost.id, event->lost.lost);
@@ -776,75 +794,44 @@
 	return map_groups__set_modules_path_dir(&machine->kmaps, modules_path);
 }
 
+static int machine__create_module(void *arg, const char *name, u64 start)
+{
+	struct machine *machine = arg;
+	struct map *map;
+
+	map = machine__new_module(machine, start, name);
+	if (map == NULL)
+		return -1;
+
+	dso__kernel_module_get_build_id(map->dso, machine->root_dir);
+
+	return 0;
+}
+
 static int machine__create_modules(struct machine *machine)
 {
-	char *line = NULL;
-	size_t n;
-	FILE *file;
-	struct map *map;
 	const char *modules;
 	char path[PATH_MAX];
 
-	if (machine__is_default_guest(machine))
+	if (machine__is_default_guest(machine)) {
 		modules = symbol_conf.default_guest_modules;
-	else {
-		sprintf(path, "%s/proc/modules", machine->root_dir);
+	} else {
+		snprintf(path, PATH_MAX, "%s/proc/modules", machine->root_dir);
 		modules = path;
 	}
 
 	if (symbol__restricted_filename(modules, "/proc/modules"))
 		return -1;
 
-	file = fopen(modules, "r");
-	if (file == NULL)
+	if (modules__parse(modules, machine, machine__create_module))
 		return -1;
 
-	while (!feof(file)) {
-		char name[PATH_MAX];
-		u64 start;
-		char *sep;
-		int line_len;
+	if (!machine__set_modules_path(machine))
+		return 0;
 
-		line_len = getline(&line, &n, file);
-		if (line_len < 0)
-			break;
+	pr_debug("Problems setting modules path maps, continuing anyway...\n");
 
-		if (!line)
-			goto out_failure;
-
-		line[--line_len] = '\0'; /* \n */
-
-		sep = strrchr(line, 'x');
-		if (sep == NULL)
-			continue;
-
-		hex2u64(sep + 1, &start);
-
-		sep = strchr(line, ' ');
-		if (sep == NULL)
-			continue;
-
-		*sep = '\0';
-
-		snprintf(name, sizeof(name), "[%s]", line);
-		map = machine__new_module(machine, start, name);
-		if (map == NULL)
-			goto out_delete_line;
-		dso__kernel_module_get_build_id(map->dso, machine->root_dir);
-	}
-
-	free(line);
-	fclose(file);
-
-	if (machine__set_modules_path(machine) < 0) {
-		pr_debug("Problems setting modules path maps, continuing anyway...\n");
-	}
 	return 0;
-
-out_delete_line:
-	free(line);
-out_failure:
-	return -1;
 }
 
 int machine__create_kernel_maps(struct machine *machine)
@@ -998,7 +985,8 @@
 }
 
 int machine__process_mmap2_event(struct machine *machine,
-				 union perf_event *event)
+				 union perf_event *event,
+				 struct perf_sample *sample __maybe_unused)
 {
 	u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 	struct thread *thread;
@@ -1045,7 +1033,8 @@
 	return 0;
 }
 
-int machine__process_mmap_event(struct machine *machine, union perf_event *event)
+int machine__process_mmap_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample __maybe_unused)
 {
 	u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 	struct thread *thread;
@@ -1102,7 +1091,8 @@
 	list_add_tail(&th->node, &machine->dead_threads);
 }
 
-int machine__process_fork_event(struct machine *machine, union perf_event *event)
+int machine__process_fork_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample)
 {
 	struct thread *thread = machine__find_thread(machine, event->fork.tid);
 	struct thread *parent = machine__findnew_thread(machine,
@@ -1119,7 +1109,7 @@
 		perf_event__fprintf_task(event, stdout);
 
 	if (thread == NULL || parent == NULL ||
-	    thread__fork(thread, parent) < 0) {
+	    thread__fork(thread, parent, sample->time) < 0) {
 		dump_printf("problem processing PERF_RECORD_FORK, skipping event.\n");
 		return -1;
 	}
@@ -1127,8 +1117,8 @@
 	return 0;
 }
 
-int machine__process_exit_event(struct machine *machine __maybe_unused,
-				union perf_event *event)
+int machine__process_exit_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample __maybe_unused)
 {
 	struct thread *thread = machine__find_thread(machine, event->fork.tid);
 
@@ -1141,23 +1131,24 @@
 	return 0;
 }
 
-int machine__process_event(struct machine *machine, union perf_event *event)
+int machine__process_event(struct machine *machine, union perf_event *event,
+			   struct perf_sample *sample)
 {
 	int ret;
 
 	switch (event->header.type) {
 	case PERF_RECORD_COMM:
-		ret = machine__process_comm_event(machine, event); break;
+		ret = machine__process_comm_event(machine, event, sample); break;
 	case PERF_RECORD_MMAP:
-		ret = machine__process_mmap_event(machine, event); break;
+		ret = machine__process_mmap_event(machine, event, sample); break;
 	case PERF_RECORD_MMAP2:
-		ret = machine__process_mmap2_event(machine, event); break;
+		ret = machine__process_mmap2_event(machine, event, sample); break;
 	case PERF_RECORD_FORK:
-		ret = machine__process_fork_event(machine, event); break;
+		ret = machine__process_fork_event(machine, event, sample); break;
 	case PERF_RECORD_EXIT:
-		ret = machine__process_exit_event(machine, event); break;
+		ret = machine__process_exit_event(machine, event, sample); break;
 	case PERF_RECORD_LOST:
-		ret = machine__process_lost_event(machine, event); break;
+		ret = machine__process_lost_event(machine, event, sample); break;
 	default:
 		ret = -1;
 		break;
@@ -1267,10 +1258,12 @@
 					     struct thread *thread,
 					     struct ip_callchain *chain,
 					     struct symbol **parent,
-					     struct addr_location *root_al)
+					     struct addr_location *root_al,
+					     int max_stack)
 {
 	u8 cpumode = PERF_RECORD_MISC_USER;
-	unsigned int i;
+	int chain_nr = min(max_stack, (int)chain->nr);
+	int i;
 	int err;
 
 	callchain_cursor_reset(&callchain_cursor);
@@ -1280,7 +1273,7 @@
 		return 0;
 	}
 
-	for (i = 0; i < chain->nr; i++) {
+	for (i = 0; i < chain_nr; i++) {
 		u64 ip;
 		struct addr_location al;
 
@@ -1352,12 +1345,14 @@
 			       struct thread *thread,
 			       struct perf_sample *sample,
 			       struct symbol **parent,
-			       struct addr_location *root_al)
+			       struct addr_location *root_al,
+			       int max_stack)
 {
 	int ret;
 
 	ret = machine__resolve_callchain_sample(machine, thread,
-						sample->callchain, parent, root_al);
+						sample->callchain, parent,
+						root_al, max_stack);
 	if (ret)
 		return ret;
 
@@ -1376,3 +1371,26 @@
 				   sample);
 
 }
+
+int machine__for_each_thread(struct machine *machine,
+			     int (*fn)(struct thread *thread, void *p),
+			     void *priv)
+{
+	struct rb_node *nd;
+	struct thread *thread;
+	int rc = 0;
+
+	for (nd = rb_first(&machine->threads); nd; nd = rb_next(nd)) {
+		thread = rb_entry(nd, struct thread, rb_node);
+		rc = fn(thread, priv);
+		if (rc != 0)
+			return rc;
+	}
+
+	list_for_each_entry(thread, &machine->dead_threads, node) {
+		rc = fn(thread, priv);
+		if (rc != 0)
+			return rc;
+	}
+	return rc;
+}
diff --git a/tools/perf/util/machine.h b/tools/perf/util/machine.h
index 58a6be1..2389ba8 100644
--- a/tools/perf/util/machine.h
+++ b/tools/perf/util/machine.h
@@ -40,13 +40,20 @@
 
 struct thread *machine__find_thread(struct machine *machine, pid_t tid);
 
-int machine__process_comm_event(struct machine *machine, union perf_event *event);
-int machine__process_exit_event(struct machine *machine, union perf_event *event);
-int machine__process_fork_event(struct machine *machine, union perf_event *event);
-int machine__process_lost_event(struct machine *machine, union perf_event *event);
-int machine__process_mmap_event(struct machine *machine, union perf_event *event);
-int machine__process_mmap2_event(struct machine *machine, union perf_event *event);
-int machine__process_event(struct machine *machine, union perf_event *event);
+int machine__process_comm_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample);
+int machine__process_exit_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample);
+int machine__process_fork_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample);
+int machine__process_lost_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample);
+int machine__process_mmap_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample);
+int machine__process_mmap2_event(struct machine *machine, union perf_event *event,
+				 struct perf_sample *sample);
+int machine__process_event(struct machine *machine, union perf_event *event,
+				struct perf_sample *sample);
 
 typedef void (*machine__process_t)(struct machine *machine, void *data);
 
@@ -74,6 +81,7 @@
 void machines__set_symbol_filter(struct machines *machines,
 				 symbol_filter_t symbol_filter);
 
+struct machine *machine__new_host(void);
 int machine__init(struct machine *machine, const char *root_dir, pid_t pid);
 void machine__exit(struct machine *machine);
 void machine__delete_dead_threads(struct machine *machine);
@@ -91,7 +99,8 @@
 			       struct thread *thread,
 			       struct perf_sample *sample,
 			       struct symbol **parent,
-			       struct addr_location *root_al);
+			       struct addr_location *root_al,
+			       int max_stack);
 
 /*
  * Default guest kernel is defined by parameter --guestkallsyms
@@ -165,4 +174,8 @@
 
 size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp);
 
+int machine__for_each_thread(struct machine *machine,
+			     int (*fn)(struct thread *thread, void *p),
+			     void *priv);
+
 #endif /* __PERF_MACHINE_H */
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 4f6680d..ef5bc91 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -172,7 +172,7 @@
 		pr_warning(", continuing without symbols\n");
 		return -1;
 	} else if (nr == 0) {
-#ifdef LIBELF_SUPPORT
+#ifdef HAVE_LIBELF_SUPPORT
 		const size_t len = strlen(name);
 		const size_t real_len = len - sizeof(DSO__DELETED);
 
@@ -252,10 +252,16 @@
 	return fprintf(fp, "%s", dsoname);
 }
 
-/*
+/**
+ * map__rip_2objdump - convert symbol start address to objdump address.
+ * @map: memory map
+ * @rip: symbol start address
+ *
  * objdump wants/reports absolute IPs for ET_EXEC, and RIPs for ET_DYN.
  * map->dso->adjust_symbols==1 for ET_EXEC-like cases except ET_REL which is
  * relative to section start.
+ *
+ * Return: Address suitable for passing to "objdump --start-address="
  */
 u64 map__rip_2objdump(struct map *map, u64 rip)
 {
@@ -268,6 +274,29 @@
 	return map->unmap_ip(map, rip);
 }
 
+/**
+ * map__objdump_2mem - convert objdump address to a memory address.
+ * @map: memory map
+ * @ip: objdump address
+ *
+ * Closely related to map__rip_2objdump(), this function takes an address from
+ * objdump and converts it to a memory address.  Note this assumes that @map
+ * contains the address.  To be sure the result is valid, check it forwards
+ * e.g. map__rip_2objdump(map->map_ip(map, map__objdump_2mem(map, ip))) == ip
+ *
+ * Return: Memory address.
+ */
+u64 map__objdump_2mem(struct map *map, u64 ip)
+{
+	if (!map->dso->adjust_symbols)
+		return map->unmap_ip(map, ip);
+
+	if (map->dso->rel)
+		return map->unmap_ip(map, ip + map->pgoff);
+
+	return ip;
+}
+
 void map_groups__init(struct map_groups *mg)
 {
 	int i;
@@ -371,6 +400,23 @@
 	return NULL;
 }
 
+int map_groups__find_ams(struct addr_map_symbol *ams, symbol_filter_t filter)
+{
+	if (ams->addr < ams->map->start || ams->addr > ams->map->end) {
+		if (ams->map->groups == NULL)
+			return -1;
+		ams->map = map_groups__find(ams->map->groups, ams->map->type,
+					    ams->addr);
+		if (ams->map == NULL)
+			return -1;
+	}
+
+	ams->al_addr = ams->map->map_ip(ams->map, ams->addr);
+	ams->sym = map__find_symbol(ams->map, ams->al_addr, filter);
+
+	return ams->sym ? 0 : -1;
+}
+
 size_t __map_groups__fprintf_maps(struct map_groups *mg,
 				  enum map_type type, int verbose, FILE *fp)
 {
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index 4886ca2..e4e259c 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -84,6 +84,9 @@
 /* rip/ip <-> addr suitable for passing to `objdump --start-address=` */
 u64 map__rip_2objdump(struct map *map, u64 rip);
 
+/* objdump address -> memory address */
+u64 map__objdump_2mem(struct map *map, u64 ip);
+
 struct symbol;
 
 typedef int (*symbol_filter_t)(struct map *map, struct symbol *sym);
@@ -167,6 +170,10 @@
 					       struct map **mapp,
 					       symbol_filter_t filter);
 
+struct addr_map_symbol;
+
+int map_groups__find_ams(struct addr_map_symbol *ams, symbol_filter_t filter);
+
 static inline
 struct symbol *map_groups__find_function_by_name(struct map_groups *mg,
 						 const char *name, struct map **mapp,
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 9812531..c90e55c 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -998,8 +998,10 @@
 	char evt_path[MAXPATHLEN];
 	char dir_path[MAXPATHLEN];
 
-	if (debugfs_valid_mountpoint(tracing_events_path))
+	if (debugfs_valid_mountpoint(tracing_events_path)) {
+		printf("  [ Tracepoints not available: %s ]\n", strerror(errno));
 		return;
+	}
 
 	sys_dir = opendir(tracing_events_path);
 	if (!sys_dir)
diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
index 91346b7..3432995 100644
--- a/tools/perf/util/parse-events.l
+++ b/tools/perf/util/parse-events.l
@@ -126,6 +126,37 @@
 
 }
 
+<config>{
+config			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG); }
+config1			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG1); }
+config2			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG2); }
+name			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NAME); }
+period			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD); }
+branch_type		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE); }
+,			{ return ','; }
+"/"			{ BEGIN(INITIAL); return '/'; }
+{name_minus}		{ return str(yyscanner, PE_NAME); }
+}
+
+<mem>{
+{modifier_bp}		{ return str(yyscanner, PE_MODIFIER_BP); }
+:			{ return ':'; }
+{num_dec}		{ return value(yyscanner, 10); }
+{num_hex}		{ return value(yyscanner, 16); }
+	/*
+	 * We need to separate 'mem:' scanner part, in order to get specific
+	 * modifier bits parsed out. Otherwise we would need to handle PE_NAME
+	 * and we'd need to parse it manually. During the escape from <mem>
+	 * state we need to put the escaping char back, so we dont miss it.
+	 */
+.			{ unput(*yytext); BEGIN(INITIAL); }
+	/*
+	 * We destroy the scanner after reaching EOF,
+	 * but anyway just to be sure get back to INIT state.
+	 */
+<<EOF>>			{ BEGIN(INITIAL); }
+}
+
 cpu-cycles|cycles				{ return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_CPU_CYCLES); }
 stalled-cycles-frontend|idle-cycles-frontend	{ return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_STALLED_CYCLES_FRONTEND); }
 stalled-cycles-backend|idle-cycles-backend	{ return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_STALLED_CYCLES_BACKEND); }
@@ -162,18 +193,6 @@
 refs|Reference|ops|access		|
 misses|miss				{ return str(yyscanner, PE_NAME_CACHE_OP_RESULT); }
 
-<config>{
-config			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG); }
-config1			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG1); }
-config2			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG2); }
-name			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NAME); }
-period			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD); }
-branch_type		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE); }
-,			{ return ','; }
-"/"			{ BEGIN(INITIAL); return '/'; }
-{name_minus}		{ return str(yyscanner, PE_NAME); }
-}
-
 mem:			{ BEGIN(mem); return PE_PREFIX_MEM; }
 r{num_raw_hex}		{ return raw(yyscanner); }
 {num_dec}		{ return value(yyscanner, 10); }
@@ -189,25 +208,7 @@
 "}"			{ return '}'; }
 =			{ return '='; }
 \n			{ }
-
-<mem>{
-{modifier_bp}		{ return str(yyscanner, PE_MODIFIER_BP); }
-:			{ return ':'; }
-{num_dec}		{ return value(yyscanner, 10); }
-{num_hex}		{ return value(yyscanner, 16); }
-	/*
-	 * We need to separate 'mem:' scanner part, in order to get specific
-	 * modifier bits parsed out. Otherwise we would need to handle PE_NAME
-	 * and we'd need to parse it manually. During the escape from <mem>
-	 * state we need to put the escaping char back, so we dont miss it.
-	 */
-.			{ unput(*yytext); BEGIN(INITIAL); }
-	/*
-	 * We destroy the scanner after reaching EOF,
-	 * but anyway just to be sure get back to INIT state.
-	 */
-<<EOF>>			{ BEGIN(INITIAL); }
-}
+.			{ }
 
 %%
 
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
index 2bc9e70..31f404a 100644
--- a/tools/perf/util/parse-options.c
+++ b/tools/perf/util/parse-options.c
@@ -339,10 +339,10 @@
 		if (arg[1] != '-') {
 			ctx->opt = arg + 1;
 			if (internal_help && *ctx->opt == 'h')
-				return parse_options_usage(usagestr, options);
+				return usage_with_options_internal(usagestr, options, 0);
 			switch (parse_short_opt(ctx, options)) {
 			case -1:
-				return parse_options_usage(usagestr, options);
+				return parse_options_usage(usagestr, options, arg + 1, 1);
 			case -2:
 				goto unknown;
 			default:
@@ -352,10 +352,11 @@
 				check_typos(arg + 1, options);
 			while (ctx->opt) {
 				if (internal_help && *ctx->opt == 'h')
-					return parse_options_usage(usagestr, options);
+					return usage_with_options_internal(usagestr, options, 0);
+				arg = ctx->opt;
 				switch (parse_short_opt(ctx, options)) {
 				case -1:
-					return parse_options_usage(usagestr, options);
+					return parse_options_usage(usagestr, options, arg, 1);
 				case -2:
 					/* fake a short option thing to hide the fact that we may have
 					 * started to parse aggregated stuff
@@ -383,12 +384,12 @@
 		if (internal_help && !strcmp(arg + 2, "help-all"))
 			return usage_with_options_internal(usagestr, options, 1);
 		if (internal_help && !strcmp(arg + 2, "help"))
-			return parse_options_usage(usagestr, options);
+			return usage_with_options_internal(usagestr, options, 0);
 		if (!strcmp(arg + 2, "list-opts"))
 			return PARSE_OPT_LIST;
 		switch (parse_long_opt(ctx, arg + 2, options)) {
 		case -1:
-			return parse_options_usage(usagestr, options);
+			return parse_options_usage(usagestr, options, arg + 2, 0);
 		case -2:
 			goto unknown;
 		default:
@@ -445,6 +446,89 @@
 #define USAGE_OPTS_WIDTH 24
 #define USAGE_GAP         2
 
+static void print_option_help(const struct option *opts, int full)
+{
+	size_t pos;
+	int pad;
+
+	if (opts->type == OPTION_GROUP) {
+		fputc('\n', stderr);
+		if (*opts->help)
+			fprintf(stderr, "%s\n", opts->help);
+		return;
+	}
+	if (!full && (opts->flags & PARSE_OPT_HIDDEN))
+		return;
+
+	pos = fprintf(stderr, "    ");
+	if (opts->short_name)
+		pos += fprintf(stderr, "-%c", opts->short_name);
+	else
+		pos += fprintf(stderr, "    ");
+
+	if (opts->long_name && opts->short_name)
+		pos += fprintf(stderr, ", ");
+	if (opts->long_name)
+		pos += fprintf(stderr, "--%s", opts->long_name);
+
+	switch (opts->type) {
+	case OPTION_ARGUMENT:
+		break;
+	case OPTION_LONG:
+	case OPTION_U64:
+	case OPTION_INTEGER:
+	case OPTION_UINTEGER:
+		if (opts->flags & PARSE_OPT_OPTARG)
+			if (opts->long_name)
+				pos += fprintf(stderr, "[=<n>]");
+			else
+				pos += fprintf(stderr, "[<n>]");
+		else
+			pos += fprintf(stderr, " <n>");
+		break;
+	case OPTION_CALLBACK:
+		if (opts->flags & PARSE_OPT_NOARG)
+			break;
+		/* FALLTHROUGH */
+	case OPTION_STRING:
+		if (opts->argh) {
+			if (opts->flags & PARSE_OPT_OPTARG)
+				if (opts->long_name)
+					pos += fprintf(stderr, "[=<%s>]", opts->argh);
+				else
+					pos += fprintf(stderr, "[<%s>]", opts->argh);
+			else
+				pos += fprintf(stderr, " <%s>", opts->argh);
+		} else {
+			if (opts->flags & PARSE_OPT_OPTARG)
+				if (opts->long_name)
+					pos += fprintf(stderr, "[=...]");
+				else
+					pos += fprintf(stderr, "[...]");
+			else
+				pos += fprintf(stderr, " ...");
+		}
+		break;
+	default: /* OPTION_{BIT,BOOLEAN,SET_UINT,SET_PTR} */
+	case OPTION_END:
+	case OPTION_GROUP:
+	case OPTION_BIT:
+	case OPTION_BOOLEAN:
+	case OPTION_INCR:
+	case OPTION_SET_UINT:
+	case OPTION_SET_PTR:
+		break;
+	}
+
+	if (pos <= USAGE_OPTS_WIDTH)
+		pad = USAGE_OPTS_WIDTH - pos;
+	else {
+		fputc('\n', stderr);
+		pad = USAGE_OPTS_WIDTH;
+	}
+	fprintf(stderr, "%*s%s\n", pad + USAGE_GAP, "", opts->help);
+}
+
 int usage_with_options_internal(const char * const *usagestr,
 				const struct option *opts, int full)
 {
@@ -464,87 +548,9 @@
 	if (opts->type != OPTION_GROUP)
 		fputc('\n', stderr);
 
-	for (; opts->type != OPTION_END; opts++) {
-		size_t pos;
-		int pad;
+	for (  ; opts->type != OPTION_END; opts++)
+		print_option_help(opts, full);
 
-		if (opts->type == OPTION_GROUP) {
-			fputc('\n', stderr);
-			if (*opts->help)
-				fprintf(stderr, "%s\n", opts->help);
-			continue;
-		}
-		if (!full && (opts->flags & PARSE_OPT_HIDDEN))
-			continue;
-
-		pos = fprintf(stderr, "    ");
-		if (opts->short_name)
-			pos += fprintf(stderr, "-%c", opts->short_name);
-		else
-			pos += fprintf(stderr, "    ");
-
-		if (opts->long_name && opts->short_name)
-			pos += fprintf(stderr, ", ");
-		if (opts->long_name)
-			pos += fprintf(stderr, "--%s", opts->long_name);
-
-		switch (opts->type) {
-		case OPTION_ARGUMENT:
-			break;
-		case OPTION_LONG:
-		case OPTION_U64:
-		case OPTION_INTEGER:
-		case OPTION_UINTEGER:
-			if (opts->flags & PARSE_OPT_OPTARG)
-				if (opts->long_name)
-					pos += fprintf(stderr, "[=<n>]");
-				else
-					pos += fprintf(stderr, "[<n>]");
-			else
-				pos += fprintf(stderr, " <n>");
-			break;
-		case OPTION_CALLBACK:
-			if (opts->flags & PARSE_OPT_NOARG)
-				break;
-			/* FALLTHROUGH */
-		case OPTION_STRING:
-			if (opts->argh) {
-				if (opts->flags & PARSE_OPT_OPTARG)
-					if (opts->long_name)
-						pos += fprintf(stderr, "[=<%s>]", opts->argh);
-					else
-						pos += fprintf(stderr, "[<%s>]", opts->argh);
-				else
-					pos += fprintf(stderr, " <%s>", opts->argh);
-			} else {
-				if (opts->flags & PARSE_OPT_OPTARG)
-					if (opts->long_name)
-						pos += fprintf(stderr, "[=...]");
-					else
-						pos += fprintf(stderr, "[...]");
-				else
-					pos += fprintf(stderr, " ...");
-			}
-			break;
-		default: /* OPTION_{BIT,BOOLEAN,SET_UINT,SET_PTR} */
-		case OPTION_END:
-		case OPTION_GROUP:
-		case OPTION_BIT:
-		case OPTION_BOOLEAN:
-		case OPTION_INCR:
-		case OPTION_SET_UINT:
-		case OPTION_SET_PTR:
-			break;
-		}
-
-		if (pos <= USAGE_OPTS_WIDTH)
-			pad = USAGE_OPTS_WIDTH - pos;
-		else {
-			fputc('\n', stderr);
-			pad = USAGE_OPTS_WIDTH;
-		}
-		fprintf(stderr, "%*s%s\n", pad + USAGE_GAP, "", opts->help);
-	}
 	fputc('\n', stderr);
 
 	return PARSE_OPT_HELP;
@@ -559,9 +565,45 @@
 }
 
 int parse_options_usage(const char * const *usagestr,
-			const struct option *opts)
+			const struct option *opts,
+			const char *optstr, bool short_opt)
 {
-	return usage_with_options_internal(usagestr, opts, 0);
+	if (!usagestr)
+		goto opt;
+
+	fprintf(stderr, "\n usage: %s\n", *usagestr++);
+	while (*usagestr && **usagestr)
+		fprintf(stderr, "    or: %s\n", *usagestr++);
+	while (*usagestr) {
+		fprintf(stderr, "%s%s\n",
+				**usagestr ? "    " : "",
+				*usagestr);
+		usagestr++;
+	}
+	fputc('\n', stderr);
+
+opt:
+	for (  ; opts->type != OPTION_END; opts++) {
+		if (short_opt) {
+			if (opts->short_name == *optstr)
+				break;
+			continue;
+		}
+
+		if (opts->long_name == NULL)
+			continue;
+
+		if (!prefixcmp(optstr, opts->long_name))
+			break;
+		if (!prefixcmp(optstr, "no-") &&
+		    !prefixcmp(optstr + 3, opts->long_name))
+			break;
+	}
+
+	if (opts->type != OPTION_END)
+		print_option_help(opts, 0);
+
+	return PARSE_OPT_HELP;
 }
 
 
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index 7bb5999..b0241e2 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -158,7 +158,9 @@
 };
 
 extern int parse_options_usage(const char * const *usagestr,
-			       const struct option *opts);
+			       const struct option *opts,
+			       const char *optstr,
+			       bool short_opt);
 
 extern void parse_options_start(struct parse_opt_ctx_t *ctx,
 				int argc, const char **argv, int flags);
diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c
index a8c4954..5d13cb4 100644
--- a/tools/perf/util/path.c
+++ b/tools/perf/util/path.c
@@ -22,19 +22,23 @@
 	return ".";
 }
 
-#ifndef HAVE_STRLCPY
-size_t strlcpy(char *dest, const char *src, size_t size)
+/*
+ * If libc has strlcpy() then that version will override this
+ * implementation:
+ */
+size_t __weak strlcpy(char *dest, const char *src, size_t size)
 {
 	size_t ret = strlen(src);
 
 	if (size) {
 		size_t len = (ret >= size) ? size - 1 : ret;
+
 		memcpy(dest, src, len);
 		dest[len] = '\0';
 	}
+
 	return ret;
 }
-#endif
 
 static char *get_pathname(void)
 {
diff --git a/tools/perf/util/perf_regs.h b/tools/perf/util/perf_regs.h
index 5a4f2b6f..a3d42cd 100644
--- a/tools/perf/util/perf_regs.h
+++ b/tools/perf/util/perf_regs.h
@@ -1,7 +1,7 @@
 #ifndef __PERF_REGS_H
 #define __PERF_REGS_H
 
-#ifdef HAVE_PERF_REGS
+#ifdef HAVE_PERF_REGS_SUPPORT
 #include <perf_regs.h>
 #else
 #define PERF_REGS_MASK	0
@@ -10,5 +10,5 @@
 {
 	return NULL;
 }
-#endif /* HAVE_PERF_REGS */
+#endif /* HAVE_PERF_REGS_SUPPORT */
 #endif /* __PERF_REGS_H */
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index bc9d806..c232d8d 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -4,7 +4,7 @@
 #include <unistd.h>
 #include <stdio.h>
 #include <dirent.h>
-#include "sysfs.h"
+#include "fs.h"
 #include "util.h"
 #include "pmu.h"
 #include "parse-events.h"
@@ -77,9 +77,8 @@
 {
 	struct stat st;
 	char path[PATH_MAX];
-	const char *sysfs;
+	const char *sysfs = sysfs__mountpoint();
 
-	sysfs = sysfs_find_mountpoint();
 	if (!sysfs)
 		return -1;
 
@@ -166,9 +165,8 @@
 {
 	struct stat st;
 	char path[PATH_MAX];
-	const char *sysfs;
+	const char *sysfs = sysfs__mountpoint();
 
-	sysfs = sysfs_find_mountpoint();
 	if (!sysfs)
 		return -1;
 
@@ -212,11 +210,10 @@
 {
 	struct stat st;
 	char path[PATH_MAX];
-	const char *sysfs;
 	FILE *file;
 	int ret = 0;
+	const char *sysfs = sysfs__mountpoint();
 
-	sysfs = sysfs_find_mountpoint();
 	if (!sysfs)
 		return -1;
 
@@ -241,11 +238,10 @@
 static void pmu_read_sysfs(void)
 {
 	char path[PATH_MAX];
-	const char *sysfs;
 	DIR *dir;
 	struct dirent *dent;
+	const char *sysfs = sysfs__mountpoint();
 
-	sysfs = sysfs_find_mountpoint();
 	if (!sysfs)
 		return;
 
@@ -270,11 +266,10 @@
 {
 	struct stat st;
 	char path[PATH_MAX];
-	const char *sysfs;
 	FILE *file;
 	struct cpu_map *cpus;
+	const char *sysfs = sysfs__mountpoint();
 
-	sysfs = sysfs_find_mountpoint();
 	if (!sysfs)
 		return NULL;
 
@@ -637,3 +632,19 @@
 		printf("\n");
 	free(aliases);
 }
+
+bool pmu_have_event(const char *pname, const char *name)
+{
+	struct perf_pmu *pmu;
+	struct perf_pmu_alias *alias;
+
+	pmu = NULL;
+	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
+		if (strcmp(pname, pmu->name))
+			continue;
+		list_for_each_entry(alias, &pmu->aliases, list)
+			if (!strcmp(alias->name, name))
+				return true;
+	}
+	return false;
+}
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index 6b2cbe2..1179b26 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -42,6 +42,7 @@
 struct perf_pmu *perf_pmu__scan(struct perf_pmu *pmu);
 
 void print_pmu_events(const char *event_glob, bool name_only);
+bool pmu_have_event(const char *pname, const char *name);
 
 int perf_pmu__test(void);
 #endif /* __PMU_H */
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index aa04bf9..9c6989c 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -47,7 +47,6 @@
 #include "session.h"
 
 #define MAX_CMDLEN 256
-#define MAX_PROBE_ARGS 128
 #define PERFPROBE_GROUP "probe"
 
 bool probe_event_dry_run;	/* Dry run flag */
@@ -201,7 +200,7 @@
 	return 0;
 }
 
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 /* Open new debuginfo of given module */
 static struct debuginfo *open_debuginfo(const char *module)
 {
@@ -630,7 +629,7 @@
 	return ret;
 }
 
-#else	/* !DWARF_SUPPORT */
+#else	/* !HAVE_DWARF_SUPPORT */
 
 static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp,
 					struct perf_probe_point *pp)
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index f069273..ffb657f 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -115,7 +115,7 @@
 };
 
 /* Get a Dwarf from offline image */
-static int debuginfo__init_offline_dwarf(struct debuginfo *self,
+static int debuginfo__init_offline_dwarf(struct debuginfo *dbg,
 					 const char *path)
 {
 	int fd;
@@ -124,25 +124,25 @@
 	if (fd < 0)
 		return fd;
 
-	self->dwfl = dwfl_begin(&offline_callbacks);
-	if (!self->dwfl)
+	dbg->dwfl = dwfl_begin(&offline_callbacks);
+	if (!dbg->dwfl)
 		goto error;
 
-	self->mod = dwfl_report_offline(self->dwfl, "", "", fd);
-	if (!self->mod)
+	dbg->mod = dwfl_report_offline(dbg->dwfl, "", "", fd);
+	if (!dbg->mod)
 		goto error;
 
-	self->dbg = dwfl_module_getdwarf(self->mod, &self->bias);
-	if (!self->dbg)
+	dbg->dbg = dwfl_module_getdwarf(dbg->mod, &dbg->bias);
+	if (!dbg->dbg)
 		goto error;
 
 	return 0;
 error:
-	if (self->dwfl)
-		dwfl_end(self->dwfl);
+	if (dbg->dwfl)
+		dwfl_end(dbg->dwfl);
 	else
 		close(fd);
-	memset(self, 0, sizeof(*self));
+	memset(dbg, 0, sizeof(*dbg));
 
 	return -ENOENT;
 }
@@ -180,24 +180,24 @@
 };
 
 /* Get a Dwarf from live kernel image */
-static int debuginfo__init_online_kernel_dwarf(struct debuginfo *self,
+static int debuginfo__init_online_kernel_dwarf(struct debuginfo *dbg,
 					       Dwarf_Addr addr)
 {
-	self->dwfl = dwfl_begin(&kernel_callbacks);
-	if (!self->dwfl)
+	dbg->dwfl = dwfl_begin(&kernel_callbacks);
+	if (!dbg->dwfl)
 		return -EINVAL;
 
 	/* Load the kernel dwarves: Don't care the result here */
-	dwfl_linux_kernel_report_kernel(self->dwfl);
-	dwfl_linux_kernel_report_modules(self->dwfl);
+	dwfl_linux_kernel_report_kernel(dbg->dwfl);
+	dwfl_linux_kernel_report_modules(dbg->dwfl);
 
-	self->dbg = dwfl_addrdwarf(self->dwfl, addr, &self->bias);
+	dbg->dbg = dwfl_addrdwarf(dbg->dwfl, addr, &dbg->bias);
 	/* Here, check whether we could get a real dwarf */
-	if (!self->dbg) {
+	if (!dbg->dbg) {
 		pr_debug("Failed to find kernel dwarf at %lx\n",
 			 (unsigned long)addr);
-		dwfl_end(self->dwfl);
-		memset(self, 0, sizeof(*self));
+		dwfl_end(dbg->dwfl);
+		memset(dbg, 0, sizeof(*dbg));
 		return -ENOENT;
 	}
 
@@ -205,7 +205,7 @@
 }
 #else
 /* With older elfutils, this just support kernel module... */
-static int debuginfo__init_online_kernel_dwarf(struct debuginfo *self,
+static int debuginfo__init_online_kernel_dwarf(struct debuginfo *dbg,
 					       Dwarf_Addr addr __maybe_unused)
 {
 	const char *path = kernel_get_module_path("kernel");
@@ -216,44 +216,45 @@
 	}
 
 	pr_debug2("Use file %s for debuginfo\n", path);
-	return debuginfo__init_offline_dwarf(self, path);
+	return debuginfo__init_offline_dwarf(dbg, path);
 }
 #endif
 
 struct debuginfo *debuginfo__new(const char *path)
 {
-	struct debuginfo *self = zalloc(sizeof(struct debuginfo));
-	if (!self)
+	struct debuginfo *dbg = zalloc(sizeof(*dbg));
+	if (!dbg)
 		return NULL;
 
-	if (debuginfo__init_offline_dwarf(self, path) < 0) {
-		free(self);
-		self = NULL;
+	if (debuginfo__init_offline_dwarf(dbg, path) < 0) {
+		free(dbg);
+		dbg = NULL;
 	}
 
-	return self;
+	return dbg;
 }
 
 struct debuginfo *debuginfo__new_online_kernel(unsigned long addr)
 {
-	struct debuginfo *self = zalloc(sizeof(struct debuginfo));
-	if (!self)
+	struct debuginfo *dbg = zalloc(sizeof(*dbg));
+
+	if (!dbg)
 		return NULL;
 
-	if (debuginfo__init_online_kernel_dwarf(self, (Dwarf_Addr)addr) < 0) {
-		free(self);
-		self = NULL;
+	if (debuginfo__init_online_kernel_dwarf(dbg, (Dwarf_Addr)addr) < 0) {
+		free(dbg);
+		dbg = NULL;
 	}
 
-	return self;
+	return dbg;
 }
 
-void debuginfo__delete(struct debuginfo *self)
+void debuginfo__delete(struct debuginfo *dbg)
 {
-	if (self) {
-		if (self->dwfl)
-			dwfl_end(self->dwfl);
-		free(self);
+	if (dbg) {
+		if (dbg->dwfl)
+			dwfl_end(dbg->dwfl);
+		free(dbg);
 	}
 }
 
@@ -273,12 +274,15 @@
 /*
  * Convert a location into trace_arg.
  * If tvar == NULL, this just checks variable can be converted.
+ * If fentry == true and vr_die is a parameter, do huristic search
+ * for the location fuzzed by function entry mcount.
  */
 static int convert_variable_location(Dwarf_Die *vr_die, Dwarf_Addr addr,
-				     Dwarf_Op *fb_ops,
+				     Dwarf_Op *fb_ops, Dwarf_Die *sp_die,
 				     struct probe_trace_arg *tvar)
 {
 	Dwarf_Attribute attr;
+	Dwarf_Addr tmp = 0;
 	Dwarf_Op *op;
 	size_t nops;
 	unsigned int regn;
@@ -291,12 +295,29 @@
 		goto static_var;
 
 	/* TODO: handle more than 1 exprs */
-	if (dwarf_attr(vr_die, DW_AT_location, &attr) == NULL ||
-	    dwarf_getlocation_addr(&attr, addr, &op, &nops, 1) <= 0 ||
-	    nops == 0) {
-		/* TODO: Support const_value */
+	if (dwarf_attr(vr_die, DW_AT_location, &attr) == NULL)
+		return -EINVAL;	/* Broken DIE ? */
+	if (dwarf_getlocation_addr(&attr, addr, &op, &nops, 1) <= 0) {
+		ret = dwarf_entrypc(sp_die, &tmp);
+		if (ret || addr != tmp ||
+		    dwarf_tag(vr_die) != DW_TAG_formal_parameter ||
+		    dwarf_highpc(sp_die, &tmp))
+			return -ENOENT;
+		/*
+		 * This is fuzzed by fentry mcount. We try to find the
+		 * parameter location at the earliest address.
+		 */
+		for (addr += 1; addr <= tmp; addr++) {
+			if (dwarf_getlocation_addr(&attr, addr, &op,
+						   &nops, 1) > 0)
+				goto found;
+		}
 		return -ENOENT;
 	}
+found:
+	if (nops == 0)
+		/* TODO: Support const_value */
+		return -ENOENT;
 
 	if (op->atom == DW_OP_addr) {
 static_var:
@@ -563,7 +584,7 @@
 	}
 
 	if (die_find_member(&type, field->name, die_mem) == NULL) {
-		pr_warning("%s(tyep:%s) has no member %s.\n", varname,
+		pr_warning("%s(type:%s) has no member %s.\n", varname,
 			   dwarf_diename(&type), field->name);
 		return -EINVAL;
 	}
@@ -600,7 +621,7 @@
 		 dwarf_diename(vr_die));
 
 	ret = convert_variable_location(vr_die, pf->addr, pf->fb_ops,
-					pf->tvar);
+					&pf->sp_die, pf->tvar);
 	if (ret == -ENOENT)
 		pr_err("Failed to find the location of %s at this address.\n"
 		       " Perhaps, it has been optimized out.\n", pf->pvar->var);
@@ -1063,7 +1084,7 @@
 }
 
 /* Find probe points from debuginfo */
-static int debuginfo__find_probes(struct debuginfo *self,
+static int debuginfo__find_probes(struct debuginfo *dbg,
 				  struct probe_finder *pf)
 {
 	struct perf_probe_point *pp = &pf->pev->point;
@@ -1074,7 +1095,7 @@
 
 #if _ELFUTILS_PREREQ(0, 142)
 	/* Get the call frame information from this dwarf */
-	pf->cfi = dwarf_getcfi(self->dbg);
+	pf->cfi = dwarf_getcfi(dbg->dbg);
 #endif
 
 	off = 0;
@@ -1093,7 +1114,7 @@
 			.data = pf,
 		};
 
-		dwarf_getpubnames(self->dbg, pubname_search_cb,
+		dwarf_getpubnames(dbg->dbg, pubname_search_cb,
 				  &pubname_param, 0);
 		if (pubname_param.found) {
 			ret = probe_point_search_cb(&pf->sp_die, &probe_param);
@@ -1103,9 +1124,9 @@
 	}
 
 	/* Loop on CUs (Compilation Unit) */
-	while (!dwarf_nextcu(self->dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
+	while (!dwarf_nextcu(dbg->dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
 		/* Get the DIE(Debugging Information Entry) of this CU */
-		diep = dwarf_offdie(self->dbg, off + cuhl, &pf->cu_die);
+		diep = dwarf_offdie(dbg->dbg, off + cuhl, &pf->cu_die);
 		if (!diep)
 			continue;
 
@@ -1136,12 +1157,80 @@
 	return ret;
 }
 
+struct local_vars_finder {
+	struct probe_finder *pf;
+	struct perf_probe_arg *args;
+	int max_args;
+	int nargs;
+	int ret;
+};
+
+/* Collect available variables in this scope */
+static int copy_variables_cb(Dwarf_Die *die_mem, void *data)
+{
+	struct local_vars_finder *vf = data;
+	struct probe_finder *pf = vf->pf;
+	int tag;
+
+	tag = dwarf_tag(die_mem);
+	if (tag == DW_TAG_formal_parameter ||
+	    tag == DW_TAG_variable) {
+		if (convert_variable_location(die_mem, vf->pf->addr,
+					      vf->pf->fb_ops, &pf->sp_die,
+					      NULL) == 0) {
+			vf->args[vf->nargs].var = (char *)dwarf_diename(die_mem);
+			if (vf->args[vf->nargs].var == NULL) {
+				vf->ret = -ENOMEM;
+				return DIE_FIND_CB_END;
+			}
+			pr_debug(" %s", vf->args[vf->nargs].var);
+			vf->nargs++;
+		}
+	}
+
+	if (dwarf_haspc(die_mem, vf->pf->addr))
+		return DIE_FIND_CB_CONTINUE;
+	else
+		return DIE_FIND_CB_SIBLING;
+}
+
+static int expand_probe_args(Dwarf_Die *sc_die, struct probe_finder *pf,
+			     struct perf_probe_arg *args)
+{
+	Dwarf_Die die_mem;
+	int i;
+	int n = 0;
+	struct local_vars_finder vf = {.pf = pf, .args = args,
+				.max_args = MAX_PROBE_ARGS, .ret = 0};
+
+	for (i = 0; i < pf->pev->nargs; i++) {
+		/* var never be NULL */
+		if (strcmp(pf->pev->args[i].var, "$vars") == 0) {
+			pr_debug("Expanding $vars into:");
+			vf.nargs = n;
+			/* Special local variables */
+			die_find_child(sc_die, copy_variables_cb, (void *)&vf,
+				       &die_mem);
+			pr_debug(" (%d)\n", vf.nargs - n);
+			if (vf.ret < 0)
+				return vf.ret;
+			n = vf.nargs;
+		} else {
+			/* Copy normal argument */
+			args[n] = pf->pev->args[i];
+			n++;
+		}
+	}
+	return n;
+}
+
 /* Add a found probe point into trace event list */
 static int add_probe_trace_event(Dwarf_Die *sc_die, struct probe_finder *pf)
 {
 	struct trace_event_finder *tf =
 			container_of(pf, struct trace_event_finder, pf);
 	struct probe_trace_event *tev;
+	struct perf_probe_arg *args;
 	int ret, i;
 
 	/* Check number of tevs */
@@ -1161,31 +1250,45 @@
 	pr_debug("Probe point found: %s+%lu\n", tev->point.symbol,
 		 tev->point.offset);
 
-	/* Find each argument */
-	tev->nargs = pf->pev->nargs;
-	tev->args = zalloc(sizeof(struct probe_trace_arg) * tev->nargs);
-	if (tev->args == NULL)
+	/* Expand special probe argument if exist */
+	args = zalloc(sizeof(struct perf_probe_arg) * MAX_PROBE_ARGS);
+	if (args == NULL)
 		return -ENOMEM;
-	for (i = 0; i < pf->pev->nargs; i++) {
-		pf->pvar = &pf->pev->args[i];
+
+	ret = expand_probe_args(sc_die, pf, args);
+	if (ret < 0)
+		goto end;
+
+	tev->nargs = ret;
+	tev->args = zalloc(sizeof(struct probe_trace_arg) * tev->nargs);
+	if (tev->args == NULL) {
+		ret = -ENOMEM;
+		goto end;
+	}
+
+	/* Find each argument */
+	for (i = 0; i < tev->nargs; i++) {
+		pf->pvar = &args[i];
 		pf->tvar = &tev->args[i];
 		/* Variable should be found from scope DIE */
 		ret = find_variable(sc_die, pf);
 		if (ret != 0)
-			return ret;
+			break;
 	}
 
-	return 0;
+end:
+	free(args);
+	return ret;
 }
 
 /* Find probe_trace_events specified by perf_probe_event from debuginfo */
-int debuginfo__find_trace_events(struct debuginfo *self,
+int debuginfo__find_trace_events(struct debuginfo *dbg,
 				 struct perf_probe_event *pev,
 				 struct probe_trace_event **tevs, int max_tevs)
 {
 	struct trace_event_finder tf = {
 			.pf = {.pev = pev, .callback = add_probe_trace_event},
-			.mod = self->mod, .max_tevs = max_tevs};
+			.mod = dbg->mod, .max_tevs = max_tevs};
 	int ret;
 
 	/* Allocate result tevs array */
@@ -1196,7 +1299,7 @@
 	tf.tevs = *tevs;
 	tf.ntevs = 0;
 
-	ret = debuginfo__find_probes(self, &tf.pf);
+	ret = debuginfo__find_probes(dbg, &tf.pf);
 	if (ret < 0) {
 		free(*tevs);
 		*tevs = NULL;
@@ -1222,7 +1325,8 @@
 	if (tag == DW_TAG_formal_parameter ||
 	    tag == DW_TAG_variable) {
 		ret = convert_variable_location(die_mem, af->pf.addr,
-						af->pf.fb_ops, NULL);
+						af->pf.fb_ops, &af->pf.sp_die,
+						NULL);
 		if (ret == 0) {
 			ret = die_get_varname(die_mem, buf, MAX_VAR_LEN);
 			pr_debug2("Add new var: %s\n", buf);
@@ -1286,14 +1390,14 @@
 }
 
 /* Find available variables at given probe point */
-int debuginfo__find_available_vars_at(struct debuginfo *self,
+int debuginfo__find_available_vars_at(struct debuginfo *dbg,
 				      struct perf_probe_event *pev,
 				      struct variable_list **vls,
 				      int max_vls, bool externs)
 {
 	struct available_var_finder af = {
 			.pf = {.pev = pev, .callback = add_available_vars},
-			.mod = self->mod,
+			.mod = dbg->mod,
 			.max_vls = max_vls, .externs = externs};
 	int ret;
 
@@ -1305,7 +1409,7 @@
 	af.vls = *vls;
 	af.nvls = 0;
 
-	ret = debuginfo__find_probes(self, &af.pf);
+	ret = debuginfo__find_probes(dbg, &af.pf);
 	if (ret < 0) {
 		/* Free vlist for error */
 		while (af.nvls--) {
@@ -1323,7 +1427,7 @@
 }
 
 /* Reverse search */
-int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr,
+int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr,
 				struct perf_probe_point *ppt)
 {
 	Dwarf_Die cudie, spdie, indie;
@@ -1332,10 +1436,10 @@
 	int baseline = 0, lineno = 0, ret = 0;
 
 	/* Adjust address with bias */
-	addr += self->bias;
+	addr += dbg->bias;
 
 	/* Find cu die */
-	if (!dwarf_addrdie(self->dbg, (Dwarf_Addr)addr - self->bias, &cudie)) {
+	if (!dwarf_addrdie(dbg->dbg, (Dwarf_Addr)addr - dbg->bias, &cudie)) {
 		pr_warning("Failed to find debug information for address %lx\n",
 			   addr);
 		ret = -EINVAL;
@@ -1536,7 +1640,7 @@
 	return param.retval;
 }
 
-int debuginfo__find_line_range(struct debuginfo *self, struct line_range *lr)
+int debuginfo__find_line_range(struct debuginfo *dbg, struct line_range *lr)
 {
 	struct line_finder lf = {.lr = lr, .found = 0};
 	int ret = 0;
@@ -1553,7 +1657,7 @@
 		struct dwarf_callback_param line_range_param = {
 			.data = (void *)&lf, .retval = 0};
 
-		dwarf_getpubnames(self->dbg, pubname_search_cb,
+		dwarf_getpubnames(dbg->dbg, pubname_search_cb,
 				  &pubname_param, 0);
 		if (pubname_param.found) {
 			line_range_search_cb(&lf.sp_die, &line_range_param);
@@ -1564,12 +1668,12 @@
 
 	/* Loop on CUs (Compilation Unit) */
 	while (!lf.found && ret >= 0) {
-		if (dwarf_nextcu(self->dbg, off, &noff, &cuhl,
+		if (dwarf_nextcu(dbg->dbg, off, &noff, &cuhl,
 				 NULL, NULL, NULL) != 0)
 			break;
 
 		/* Get the DIE(Debugging Information Entry) of this CU */
-		diep = dwarf_offdie(self->dbg, off + cuhl, &lf.cu_die);
+		diep = dwarf_offdie(dbg->dbg, off + cuhl, &lf.cu_die);
 		if (!diep)
 			continue;
 
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index 3b7d630..ffc33cd 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -7,6 +7,7 @@
 
 #define MAX_PROBE_BUFFER	1024
 #define MAX_PROBES		 128
+#define MAX_PROBE_ARGS		 128
 
 static inline int is_c_varname(const char *name)
 {
@@ -14,7 +15,7 @@
 	return isalpha(name[0]) || name[0] == '_';
 }
 
-#ifdef DWARF_SUPPORT
+#ifdef HAVE_DWARF_SUPPORT
 
 #include "dwarf-aux.h"
 
@@ -30,25 +31,25 @@
 
 extern struct debuginfo *debuginfo__new(const char *path);
 extern struct debuginfo *debuginfo__new_online_kernel(unsigned long addr);
-extern void debuginfo__delete(struct debuginfo *self);
+extern void debuginfo__delete(struct debuginfo *dbg);
 
 /* Find probe_trace_events specified by perf_probe_event from debuginfo */
-extern int debuginfo__find_trace_events(struct debuginfo *self,
+extern int debuginfo__find_trace_events(struct debuginfo *dbg,
 					struct perf_probe_event *pev,
 					struct probe_trace_event **tevs,
 					int max_tevs);
 
 /* Find a perf_probe_point from debuginfo */
-extern int debuginfo__find_probe_point(struct debuginfo *self,
+extern int debuginfo__find_probe_point(struct debuginfo *dbg,
 				       unsigned long addr,
 				       struct perf_probe_point *ppt);
 
 /* Find a line range */
-extern int debuginfo__find_line_range(struct debuginfo *self,
+extern int debuginfo__find_line_range(struct debuginfo *dbg,
 				      struct line_range *lr);
 
 /* Find available variables */
-extern int debuginfo__find_available_vars_at(struct debuginfo *self,
+extern int debuginfo__find_available_vars_at(struct debuginfo *dbg,
 					     struct perf_probe_event *pev,
 					     struct variable_list **vls,
 					     int max_points, bool externs);
@@ -105,6 +106,6 @@
 	int			found;
 };
 
-#endif /* DWARF_SUPPORT */
+#endif /* HAVE_DWARF_SUPPORT */
 
 #endif /*_PROBE_FINDER_H */
diff --git a/tools/perf/util/pstack.h b/tools/perf/util/pstack.h
index 4cedea5..c3cb658 100644
--- a/tools/perf/util/pstack.h
+++ b/tools/perf/util/pstack.h
@@ -5,10 +5,10 @@
 
 struct pstack;
 struct pstack *pstack__new(unsigned short max_nr_entries);
-void pstack__delete(struct pstack *self);
-bool pstack__empty(const struct pstack *self);
-void pstack__remove(struct pstack *self, void *key);
-void pstack__push(struct pstack *self, void *key);
-void *pstack__pop(struct pstack *self);
+void pstack__delete(struct pstack *pstack);
+bool pstack__empty(const struct pstack *pstack);
+void pstack__remove(struct pstack *pstack, void *key);
+void pstack__push(struct pstack *pstack, void *key);
+void *pstack__pop(struct pstack *pstack);
 
 #endif /* _PERF_PSTACK_ */
diff --git a/tools/perf/util/python-ext-sources b/tools/perf/util/python-ext-sources
index f75ae1b..239036f 100644
--- a/tools/perf/util/python-ext-sources
+++ b/tools/perf/util/python-ext-sources
@@ -17,5 +17,5 @@
 util/cgroup.c
 util/rblist.c
 util/strlist.c
-util/sysfs.c
+util/fs.c
 ../../lib/rbtree.c
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index 2ac4bc9..4bf8ace 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -33,13 +33,6 @@
 # define PyVarObject_HEAD_INIT(type, size) PyObject_HEAD_INIT(type) size,
 #endif
 
-struct throttle_event {
-	struct perf_event_header header;
-	u64			 time;
-	u64			 id;
-	u64			 stream_id;
-};
-
 PyMODINIT_FUNC initperf(void);
 
 #define member_def(type, member, ptype, help) \
@@ -1038,6 +1031,7 @@
 	    pyrf_cpu_map__setup_types() < 0)
 		return;
 
+	/* The page_size is placed in util object. */
 	page_size = sysconf(_SC_PAGE_SIZE);
 
 	Py_INCREF(&pyrf_evlist__type);
diff --git a/tools/perf/util/rblist.c b/tools/perf/util/rblist.c
index a16cdd2..0dfe27d 100644
--- a/tools/perf/util/rblist.c
+++ b/tools/perf/util/rblist.c
@@ -48,10 +48,12 @@
 	rblist->node_delete(rblist, rb_node);
 }
 
-struct rb_node *rblist__find(struct rblist *rblist, const void *entry)
+static struct rb_node *__rblist__findnew(struct rblist *rblist,
+					 const void *entry,
+					 bool create)
 {
 	struct rb_node **p = &rblist->entries.rb_node;
-	struct rb_node *parent = NULL;
+	struct rb_node *parent = NULL, *new_node = NULL;
 
 	while (*p != NULL) {
 		int rc;
@@ -67,7 +69,26 @@
 			return parent;
 	}
 
-	return NULL;
+	if (create) {
+		new_node = rblist->node_new(rblist, entry);
+		if (new_node) {
+			rb_link_node(new_node, parent, p);
+			rb_insert_color(new_node, &rblist->entries);
+			++rblist->nr_entries;
+		}
+	}
+
+	return new_node;
+}
+
+struct rb_node *rblist__find(struct rblist *rblist, const void *entry)
+{
+	return __rblist__findnew(rblist, entry, false);
+}
+
+struct rb_node *rblist__findnew(struct rblist *rblist, const void *entry)
+{
+	return __rblist__findnew(rblist, entry, true);
 }
 
 void rblist__init(struct rblist *rblist)
diff --git a/tools/perf/util/rblist.h b/tools/perf/util/rblist.h
index 6d0cae5..ff9913b 100644
--- a/tools/perf/util/rblist.h
+++ b/tools/perf/util/rblist.h
@@ -32,6 +32,7 @@
 int rblist__add_node(struct rblist *rblist, const void *new_entry);
 void rblist__remove_node(struct rblist *rblist, struct rb_node *rb_node);
 struct rb_node *rblist__find(struct rblist *rblist, const void *entry);
+struct rb_node *rblist__findnew(struct rblist *rblist, const void *entry);
 struct rb_node *rblist__entry(const struct rblist *rblist, unsigned int idx);
 
 static inline bool rblist__empty(const struct rblist *rblist)
diff --git a/tools/perf/util/record.c b/tools/perf/util/record.c
index 18d73aa..c8845b1 100644
--- a/tools/perf/util/record.c
+++ b/tools/perf/util/record.c
@@ -2,6 +2,8 @@
 #include "evsel.h"
 #include "cpumap.h"
 #include "parse-events.h"
+#include "fs.h"
+#include "util.h"
 
 typedef void (*setup_probe_fn_t)(struct perf_evsel *evsel);
 
@@ -106,3 +108,72 @@
 
 	perf_evlist__set_id_pos(evlist);
 }
+
+static int get_max_rate(unsigned int *rate)
+{
+	char path[PATH_MAX];
+	const char *procfs = procfs__mountpoint();
+
+	if (!procfs)
+		return -1;
+
+	snprintf(path, PATH_MAX,
+		 "%s/sys/kernel/perf_event_max_sample_rate", procfs);
+
+	return filename__read_int(path, (int *) rate);
+}
+
+static int perf_record_opts__config_freq(struct perf_record_opts *opts)
+{
+	bool user_freq = opts->user_freq != UINT_MAX;
+	unsigned int max_rate;
+
+	if (opts->user_interval != ULLONG_MAX)
+		opts->default_interval = opts->user_interval;
+	if (user_freq)
+		opts->freq = opts->user_freq;
+
+	/*
+	 * User specified count overrides default frequency.
+	 */
+	if (opts->default_interval)
+		opts->freq = 0;
+	else if (opts->freq) {
+		opts->default_interval = opts->freq;
+	} else {
+		pr_err("frequency and count are zero, aborting\n");
+		return -1;
+	}
+
+	if (get_max_rate(&max_rate))
+		return 0;
+
+	/*
+	 * User specified frequency is over current maximum.
+	 */
+	if (user_freq && (max_rate < opts->freq)) {
+		pr_err("Maximum frequency rate (%u) reached.\n"
+		   "Please use -F freq option with lower value or consider\n"
+		   "tweaking /proc/sys/kernel/perf_event_max_sample_rate.\n",
+		   max_rate);
+		return -1;
+	}
+
+	/*
+	 * Default frequency is over current maximum.
+	 */
+	if (max_rate < opts->freq) {
+		pr_warning("Lowering default frequency rate to %u.\n"
+			   "Please consider tweaking "
+			   "/proc/sys/kernel/perf_event_max_sample_rate.\n",
+			   max_rate);
+		opts->freq = max_rate;
+	}
+
+	return 0;
+}
+
+int perf_record_opts__config(struct perf_record_opts *opts)
+{
+	return perf_record_opts__config_freq(opts);
+}
diff --git a/tools/perf/util/scripting-engines/trace-event-perl.c b/tools/perf/util/scripting-engines/trace-event-perl.c
index c0c9795..d5e5969 100644
--- a/tools/perf/util/scripting-engines/trace-event-perl.c
+++ b/tools/perf/util/scripting-engines/trace-event-perl.c
@@ -273,7 +273,7 @@
 	int cpu = sample->cpu;
 	void *data = sample->raw_data;
 	unsigned long long nsecs = sample->time;
-	char *comm = thread->comm;
+	const char *comm = thread__comm_str(thread);
 
 	dSP;
 
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 95d91a0..53c20e7 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -250,7 +250,7 @@
 	int cpu = sample->cpu;
 	void *data = sample->raw_data;
 	unsigned long long nsecs = sample->time;
-	char *comm = thread->comm;
+	const char *comm = thread__comm_str(thread);
 
 	t = PyTuple_New(MAX_FIELDS);
 	if (!t)
@@ -389,7 +389,7 @@
 	pydict_set_item_string_decref(dict, "raw_buf", PyString_FromStringAndSize(
 			(const char *)sample->raw_data, sample->raw_size));
 	pydict_set_item_string_decref(dict, "comm",
-			PyString_FromString(thread->comm));
+			PyString_FromString(thread__comm_str(thread)));
 	if (al->map) {
 		pydict_set_item_string_decref(dict, "dso",
 			PyString_FromString(al->map->dso->name));
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 568b750..f36d24a 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -16,73 +16,34 @@
 #include "perf_regs.h"
 #include "vdso.h"
 
-static int perf_session__open(struct perf_session *self, bool force)
+static int perf_session__open(struct perf_session *session)
 {
-	struct stat input_stat;
+	struct perf_data_file *file = session->file;
 
-	if (!strcmp(self->filename, "-")) {
-		self->fd_pipe = true;
-		self->fd = STDIN_FILENO;
-
-		if (perf_session__read_header(self) < 0)
-			pr_err("incompatible file format (rerun with -v to learn more)");
-
-		return 0;
-	}
-
-	self->fd = open(self->filename, O_RDONLY);
-	if (self->fd < 0) {
-		int err = errno;
-
-		pr_err("failed to open %s: %s", self->filename, strerror(err));
-		if (err == ENOENT && !strcmp(self->filename, "perf.data"))
-			pr_err("  (try 'perf record' first)");
-		pr_err("\n");
-		return -errno;
-	}
-
-	if (fstat(self->fd, &input_stat) < 0)
-		goto out_close;
-
-	if (!force && input_stat.st_uid && (input_stat.st_uid != geteuid())) {
-		pr_err("file %s not owned by current user or root\n",
-		       self->filename);
-		goto out_close;
-	}
-
-	if (!input_stat.st_size) {
-		pr_info("zero-sized file (%s), nothing to do!\n",
-			self->filename);
-		goto out_close;
-	}
-
-	if (perf_session__read_header(self) < 0) {
+	if (perf_session__read_header(session) < 0) {
 		pr_err("incompatible file format (rerun with -v to learn more)");
-		goto out_close;
+		return -1;
 	}
 
-	if (!perf_evlist__valid_sample_type(self->evlist)) {
+	if (perf_data_file__is_pipe(file))
+		return 0;
+
+	if (!perf_evlist__valid_sample_type(session->evlist)) {
 		pr_err("non matching sample_type");
-		goto out_close;
+		return -1;
 	}
 
-	if (!perf_evlist__valid_sample_id_all(self->evlist)) {
+	if (!perf_evlist__valid_sample_id_all(session->evlist)) {
 		pr_err("non matching sample_id_all");
-		goto out_close;
+		return -1;
 	}
 
-	if (!perf_evlist__valid_read_format(self->evlist)) {
+	if (!perf_evlist__valid_read_format(session->evlist)) {
 		pr_err("non matching read_format");
-		goto out_close;
+		return -1;
 	}
 
-	self->size = input_stat.st_size;
 	return 0;
-
-out_close:
-	close(self->fd);
-	self->fd = -1;
-	return -1;
 }
 
 void perf_session__set_id_hdr_size(struct perf_session *session)
@@ -92,71 +53,70 @@
 	machines__set_id_hdr_size(&session->machines, id_hdr_size);
 }
 
-int perf_session__create_kernel_maps(struct perf_session *self)
+int perf_session__create_kernel_maps(struct perf_session *session)
 {
-	int ret = machine__create_kernel_maps(&self->machines.host);
+	int ret = machine__create_kernel_maps(&session->machines.host);
 
 	if (ret >= 0)
-		ret = machines__create_guest_kernel_maps(&self->machines);
+		ret = machines__create_guest_kernel_maps(&session->machines);
 	return ret;
 }
 
-static void perf_session__destroy_kernel_maps(struct perf_session *self)
+static void perf_session__destroy_kernel_maps(struct perf_session *session)
 {
-	machines__destroy_kernel_maps(&self->machines);
+	machines__destroy_kernel_maps(&session->machines);
 }
 
-struct perf_session *perf_session__new(const char *filename, int mode,
-				       bool force, bool repipe,
-				       struct perf_tool *tool)
+struct perf_session *perf_session__new(struct perf_data_file *file,
+				       bool repipe, struct perf_tool *tool)
 {
-	struct perf_session *self;
-	struct stat st;
-	size_t len;
+	struct perf_session *session = zalloc(sizeof(*session));
 
-	if (!filename || !strlen(filename)) {
-		if (!fstat(STDIN_FILENO, &st) && S_ISFIFO(st.st_mode))
-			filename = "-";
-		else
-			filename = "perf.data";
-	}
-
-	len = strlen(filename);
-	self = zalloc(sizeof(*self) + len);
-
-	if (self == NULL)
+	if (!session)
 		goto out;
 
-	memcpy(self->filename, filename, len);
-	self->repipe = repipe;
-	INIT_LIST_HEAD(&self->ordered_samples.samples);
-	INIT_LIST_HEAD(&self->ordered_samples.sample_cache);
-	INIT_LIST_HEAD(&self->ordered_samples.to_free);
-	machines__init(&self->machines);
+	session->repipe = repipe;
+	INIT_LIST_HEAD(&session->ordered_samples.samples);
+	INIT_LIST_HEAD(&session->ordered_samples.sample_cache);
+	INIT_LIST_HEAD(&session->ordered_samples.to_free);
+	machines__init(&session->machines);
 
-	if (mode == O_RDONLY) {
-		if (perf_session__open(self, force) < 0)
+	if (file) {
+		if (perf_data_file__open(file))
 			goto out_delete;
-		perf_session__set_id_hdr_size(self);
-	} else if (mode == O_WRONLY) {
+
+		session->file = file;
+
+		if (perf_data_file__is_read(file)) {
+			if (perf_session__open(session) < 0)
+				goto out_close;
+
+			perf_session__set_id_hdr_size(session);
+		}
+	}
+
+	if (!file || perf_data_file__is_write(file)) {
 		/*
 		 * In O_RDONLY mode this will be performed when reading the
 		 * kernel MMAP event, in perf_event__process_mmap().
 		 */
-		if (perf_session__create_kernel_maps(self) < 0)
+		if (perf_session__create_kernel_maps(session) < 0)
 			goto out_delete;
 	}
 
 	if (tool && tool->ordering_requires_timestamps &&
-	    tool->ordered_samples && !perf_evlist__sample_id_all(self->evlist)) {
+	    tool->ordered_samples && !perf_evlist__sample_id_all(session->evlist)) {
 		dump_printf("WARNING: No sample_id_all support, falling back to unordered processing\n");
 		tool->ordered_samples = false;
 	}
 
-out:
-	return self;
-out_delete:
-	perf_session__delete(self);
+	return session;
+
+ out_close:
+	perf_data_file__close(file);
+ out_delete:
+	perf_session__delete(session);
+ out:
 	return NULL;
 }
 
@@ -186,15 +146,16 @@
 	free(env->pmu_mappings);
 }
 
-void perf_session__delete(struct perf_session *self)
+void perf_session__delete(struct perf_session *session)
 {
-	perf_session__destroy_kernel_maps(self);
-	perf_session__delete_dead_threads(self);
-	perf_session__delete_threads(self);
-	perf_session_env__delete(&self->header.env);
-	machines__exit(&self->machines);
-	close(self->fd);
-	free(self);
+	perf_session__destroy_kernel_maps(session);
+	perf_session__delete_dead_threads(session);
+	perf_session__delete_threads(session);
+	perf_session_env__delete(&session->header.env);
+	machines__exit(&session->machines);
+	if (session->file)
+		perf_data_file__close(session->file);
+	free(session);
 	vdso__exit();
 }
 
@@ -397,6 +358,17 @@
 		swap_sample_id_all(event, &event->read + 1);
 }
 
+static void perf_event__throttle_swap(union perf_event *event,
+				      bool sample_id_all)
+{
+	event->throttle.time	  = bswap_64(event->throttle.time);
+	event->throttle.id	  = bswap_64(event->throttle.id);
+	event->throttle.stream_id = bswap_64(event->throttle.stream_id);
+
+	if (sample_id_all)
+		swap_sample_id_all(event, &event->throttle + 1);
+}
+
 static u8 revbyte(u8 b)
 {
 	int rev = (b >> 4) | ((b & 0xf) << 4);
@@ -442,6 +414,9 @@
 	attr->bp_type		= bswap_32(attr->bp_type);
 	attr->bp_addr		= bswap_64(attr->bp_addr);
 	attr->bp_len		= bswap_64(attr->bp_len);
+	attr->branch_sample_type = bswap_64(attr->branch_sample_type);
+	attr->sample_regs_user	 = bswap_64(attr->sample_regs_user);
+	attr->sample_stack_user  = bswap_32(attr->sample_stack_user);
 
 	swap_bitfield((u8 *) (&attr->read_format + 1), sizeof(u64));
 }
@@ -482,6 +457,8 @@
 	[PERF_RECORD_EXIT]		  = perf_event__task_swap,
 	[PERF_RECORD_LOST]		  = perf_event__all64_swap,
 	[PERF_RECORD_READ]		  = perf_event__read_swap,
+	[PERF_RECORD_THROTTLE]		  = perf_event__throttle_swap,
+	[PERF_RECORD_UNTHROTTLE]	  = perf_event__throttle_swap,
 	[PERF_RECORD_SAMPLE]		  = perf_event__all64_swap,
 	[PERF_RECORD_HEADER_ATTR]	  = perf_event__hdr_attr_swap,
 	[PERF_RECORD_HEADER_EVENT_TYPE]	  = perf_event__event_type_swap,
@@ -525,13 +502,16 @@
 	struct perf_sample sample;
 	u64 limit = os->next_flush;
 	u64 last_ts = os->last_sample ? os->last_sample->timestamp : 0ULL;
-	unsigned idx = 0, progress_next = os->nr_samples / 16;
 	bool show_progress = limit == ULLONG_MAX;
+	struct ui_progress prog;
 	int ret;
 
 	if (!tool->ordered_samples || !limit)
 		return 0;
 
+	if (show_progress)
+		ui_progress__init(&prog, os->nr_samples, "Processing time ordered events...");
+
 	list_for_each_entry_safe(iter, tmp, head, list) {
 		if (session_done())
 			return 0;
@@ -552,11 +532,9 @@
 		os->last_flush = iter->timestamp;
 		list_del(&iter->list);
 		list_add(&iter->list, &os->sample_cache);
-		if (show_progress && (++idx >= progress_next)) {
-			progress_next += os->nr_samples / 16;
-			ui_progress__update(idx, os->nr_samples,
-					    "Processing time ordered events...");
-		}
+
+		if (show_progress)
+			ui_progress__update(&prog, 1);
 	}
 
 	if (list_empty(head)) {
@@ -860,6 +838,9 @@
 	if (sample_type & PERF_SAMPLE_DATA_SRC)
 		printf(" . data_src: 0x%"PRIx64"\n", sample->data_src);
 
+	if (sample_type & PERF_SAMPLE_TRANSACTION)
+		printf("... transaction: %" PRIx64 "\n", sample->transaction);
+
 	if (sample_type & PERF_SAMPLE_READ)
 		sample_read__printf(sample, evsel->attr.read_format);
 }
@@ -1031,6 +1012,7 @@
 static int perf_session__process_user_event(struct perf_session *session, union perf_event *event,
 					    struct perf_tool *tool, u64 file_offset)
 {
+	int fd = perf_data_file__fd(session->file);
 	int err;
 
 	dump_event(session, event, file_offset, NULL);
@@ -1044,7 +1026,7 @@
 		return err;
 	case PERF_RECORD_HEADER_TRACING_DATA:
 		/* setup for reading amidst mmap */
-		lseek(session->fd, file_offset, SEEK_SET);
+		lseek(fd, file_offset, SEEK_SET);
 		return tool->tracing_data(tool, event, session);
 	case PERF_RECORD_HEADER_BUILD_ID:
 		return tool->build_id(tool, event, session);
@@ -1101,11 +1083,11 @@
 					  file_offset);
 }
 
-void perf_event_header__bswap(struct perf_event_header *self)
+void perf_event_header__bswap(struct perf_event_header *hdr)
 {
-	self->type = bswap_32(self->type);
-	self->misc = bswap_16(self->misc);
-	self->size = bswap_16(self->size);
+	hdr->type = bswap_32(hdr->type);
+	hdr->misc = bswap_16(hdr->misc);
+	hdr->size = bswap_16(hdr->size);
 }
 
 struct thread *perf_session__findnew(struct perf_session *session, pid_t pid)
@@ -1113,11 +1095,11 @@
 	return machine__findnew_thread(&session->machines.host, 0, pid);
 }
 
-static struct thread *perf_session__register_idle_thread(struct perf_session *self)
+static struct thread *perf_session__register_idle_thread(struct perf_session *session)
 {
-	struct thread *thread = perf_session__findnew(self, 0);
+	struct thread *thread = perf_session__findnew(session, 0);
 
-	if (thread == NULL || thread__set_comm(thread, "swapper")) {
+	if (thread == NULL || thread__set_comm(thread, "swapper", 0)) {
 		pr_err("problem inserting idle task.\n");
 		thread = NULL;
 	}
@@ -1167,9 +1149,10 @@
 
 volatile int session_done;
 
-static int __perf_session__process_pipe_events(struct perf_session *self,
+static int __perf_session__process_pipe_events(struct perf_session *session,
 					       struct perf_tool *tool)
 {
+	int fd = perf_data_file__fd(session->file);
 	union perf_event *event;
 	uint32_t size, cur_size = 0;
 	void *buf = NULL;
@@ -1188,7 +1171,7 @@
 		return -errno;
 more:
 	event = buf;
-	err = readn(self->fd, event, sizeof(struct perf_event_header));
+	err = readn(fd, event, sizeof(struct perf_event_header));
 	if (err <= 0) {
 		if (err == 0)
 			goto done;
@@ -1197,7 +1180,7 @@
 		goto out_err;
 	}
 
-	if (self->header.needs_swap)
+	if (session->header.needs_swap)
 		perf_event_header__bswap(&event->header);
 
 	size = event->header.size;
@@ -1220,7 +1203,7 @@
 	p += sizeof(struct perf_event_header);
 
 	if (size - sizeof(struct perf_event_header)) {
-		err = readn(self->fd, p, size - sizeof(struct perf_event_header));
+		err = readn(fd, p, size - sizeof(struct perf_event_header));
 		if (err <= 0) {
 			if (err == 0) {
 				pr_err("unexpected end of event stream\n");
@@ -1232,7 +1215,7 @@
 		}
 	}
 
-	if ((skip = perf_session__process_event(self, event, tool, head)) < 0) {
+	if ((skip = perf_session__process_event(session, event, tool, head)) < 0) {
 		pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n",
 		       head, event->header.size, event->header.type);
 		err = -EINVAL;
@@ -1247,11 +1230,13 @@
 	if (!session_done())
 		goto more;
 done:
-	err = 0;
+	/* do the final flush for ordered samples */
+	session->ordered_samples.next_flush = ULLONG_MAX;
+	err = flush_sample_queue(session, tool);
 out_err:
 	free(buf);
-	perf_session__warn_about_errors(self, tool);
-	perf_session_free_sample_buffers(self);
+	perf_session__warn_about_errors(session, tool);
+	perf_session_free_sample_buffers(session);
 	return err;
 }
 
@@ -1299,12 +1284,14 @@
 				   u64 data_offset, u64 data_size,
 				   u64 file_size, struct perf_tool *tool)
 {
-	u64 head, page_offset, file_offset, file_pos, progress_next;
+	int fd = perf_data_file__fd(session->file);
+	u64 head, page_offset, file_offset, file_pos;
 	int err, mmap_prot, mmap_flags, map_idx = 0;
 	size_t	mmap_size;
 	char *buf, *mmaps[NUM_MMAPS];
 	union perf_event *event;
 	uint32_t size;
+	struct ui_progress prog;
 
 	perf_tool__fill_defaults(tool);
 
@@ -1315,7 +1302,7 @@
 	if (data_size && (data_offset + data_size < file_size))
 		file_size = data_offset + data_size;
 
-	progress_next = file_size / 16;
+	ui_progress__init(&prog, file_size, "Processing events...");
 
 	mmap_size = MMAP_SIZE;
 	if (mmap_size > file_size)
@@ -1331,7 +1318,7 @@
 		mmap_flags = MAP_PRIVATE;
 	}
 remap:
-	buf = mmap(NULL, mmap_size, mmap_prot, mmap_flags, session->fd,
+	buf = mmap(NULL, mmap_size, mmap_prot, mmap_flags, fd,
 		   file_offset);
 	if (buf == MAP_FAILED) {
 		pr_err("failed to mmap file\n");
@@ -1370,19 +1357,15 @@
 	head += size;
 	file_pos += size;
 
-	if (file_pos >= progress_next) {
-		progress_next += file_size / 16;
-		ui_progress__update(file_pos, file_size,
-				    "Processing events...");
-	}
+	ui_progress__update(&prog, size);
 
-	err = 0;
 	if (session_done())
-		goto out_err;
+		goto out;
 
 	if (file_pos < file_size)
 		goto more;
 
+out:
 	/* do the final flush for ordered samples */
 	session->ordered_samples.next_flush = ULLONG_MAX;
 	err = flush_sample_queue(session, tool);
@@ -1393,21 +1376,22 @@
 	return err;
 }
 
-int perf_session__process_events(struct perf_session *self,
+int perf_session__process_events(struct perf_session *session,
 				 struct perf_tool *tool)
 {
+	u64 size = perf_data_file__size(session->file);
 	int err;
 
-	if (perf_session__register_idle_thread(self) == NULL)
+	if (perf_session__register_idle_thread(session) == NULL)
 		return -ENOMEM;
 
-	if (!self->fd_pipe)
-		err = __perf_session__process_events(self,
-						     self->header.data_offset,
-						     self->header.data_size,
-						     self->size, tool);
+	if (!perf_data_file__is_pipe(session->file))
+		err = __perf_session__process_events(session,
+						     session->header.data_offset,
+						     session->header.data_size,
+						     size, tool);
 	else
-		err = __perf_session__process_pipe_events(self, tool);
+		err = __perf_session__process_pipe_events(session, tool);
 
 	return err;
 }
@@ -1456,15 +1440,15 @@
 	return 0;
 }
 
-size_t perf_session__fprintf_dsos(struct perf_session *self, FILE *fp)
+size_t perf_session__fprintf_dsos(struct perf_session *session, FILE *fp)
 {
-	return machines__fprintf_dsos(&self->machines, fp);
+	return machines__fprintf_dsos(&session->machines, fp);
 }
 
-size_t perf_session__fprintf_dsos_buildid(struct perf_session *self, FILE *fp,
+size_t perf_session__fprintf_dsos_buildid(struct perf_session *session, FILE *fp,
 					  bool (skip)(struct dso *dso, int parm), int parm)
 {
-	return machines__fprintf_dsos_buildid(&self->machines, fp, skip, parm);
+	return machines__fprintf_dsos_buildid(&session->machines, fp, skip, parm);
 }
 
 size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp)
@@ -1525,7 +1509,8 @@
 	if (symbol_conf.use_callchain && sample->callchain) {
 
 		if (machine__resolve_callchain(machine, evsel, al.thread,
-					       sample, NULL, NULL) != 0) {
+					       sample, NULL, NULL,
+					       PERF_MAX_STACK_DEPTH) != 0) {
 			if (verbose)
 				error("Failed to resolve callchain. Skipping\n");
 			return;
@@ -1629,13 +1614,14 @@
 void perf_session__fprintf_info(struct perf_session *session, FILE *fp,
 				bool full)
 {
+	int fd = perf_data_file__fd(session->file);
 	struct stat st;
 	int ret;
 
 	if (session == NULL || fp == NULL)
 		return;
 
-	ret = fstat(session->fd, &st);
+	ret = fstat(fd, &st);
 	if (ret == -1)
 		return;
 
@@ -1664,9 +1650,9 @@
 			continue;
 
 		err = -EEXIST;
-		if (evsel->handler.func != NULL)
+		if (evsel->handler != NULL)
 			goto out;
-		evsel->handler.func = assocs[i].handler;
+		evsel->handler = assocs[i].handler;
 	}
 
 	err = 0;
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 04bf737..50f6409 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -7,6 +7,7 @@
 #include "machine.h"
 #include "symbol.h"
 #include "thread.h"
+#include "data.h"
 #include <linux/rbtree.h>
 #include <linux/perf_event.h>
 
@@ -29,16 +30,13 @@
 
 struct perf_session {
 	struct perf_header	header;
-	unsigned long		size;
 	struct machines		machines;
 	struct perf_evlist	*evlist;
 	struct pevent		*pevent;
 	struct events_stats	stats;
-	int			fd;
-	bool			fd_pipe;
 	bool			repipe;
 	struct ordered_samples	ordered_samples;
-	char			filename[1];
+	struct perf_data_file	*file;
 };
 
 #define PRINT_IP_OPT_IP		(1<<0)
@@ -49,17 +47,16 @@
 
 struct perf_tool;
 
-struct perf_session *perf_session__new(const char *filename, int mode,
-				       bool force, bool repipe,
-				       struct perf_tool *tool);
+struct perf_session *perf_session__new(struct perf_data_file *file,
+				       bool repipe, struct perf_tool *tool);
 void perf_session__delete(struct perf_session *session);
 
-void perf_event_header__bswap(struct perf_event_header *self);
+void perf_event_header__bswap(struct perf_event_header *hdr);
 
-int __perf_session__process_events(struct perf_session *self,
+int __perf_session__process_events(struct perf_session *session,
 				   u64 data_offset, u64 data_size, u64 size,
 				   struct perf_tool *tool);
-int perf_session__process_events(struct perf_session *self,
+int perf_session__process_events(struct perf_session *session,
 				 struct perf_tool *tool);
 
 int perf_session_queue_event(struct perf_session *s, union perf_event *event,
@@ -67,37 +64,38 @@
 
 void perf_tool__fill_defaults(struct perf_tool *tool);
 
-int perf_session__resolve_callchain(struct perf_session *self, struct perf_evsel *evsel,
+int perf_session__resolve_callchain(struct perf_session *session,
+				    struct perf_evsel *evsel,
 				    struct thread *thread,
 				    struct ip_callchain *chain,
 				    struct symbol **parent);
 
-bool perf_session__has_traces(struct perf_session *self, const char *msg);
+bool perf_session__has_traces(struct perf_session *session, const char *msg);
 
 void mem_bswap_64(void *src, int byte_size);
 void mem_bswap_32(void *src, int byte_size);
 void perf_event__attr_swap(struct perf_event_attr *attr);
 
-int perf_session__create_kernel_maps(struct perf_session *self);
+int perf_session__create_kernel_maps(struct perf_session *session);
 
 void perf_session__set_id_hdr_size(struct perf_session *session);
 
 static inline
-struct machine *perf_session__find_machine(struct perf_session *self, pid_t pid)
+struct machine *perf_session__find_machine(struct perf_session *session, pid_t pid)
 {
-	return machines__find(&self->machines, pid);
+	return machines__find(&session->machines, pid);
 }
 
 static inline
-struct machine *perf_session__findnew_machine(struct perf_session *self, pid_t pid)
+struct machine *perf_session__findnew_machine(struct perf_session *session, pid_t pid)
 {
-	return machines__findnew(&self->machines, pid);
+	return machines__findnew(&session->machines, pid);
 }
 
-struct thread *perf_session__findnew(struct perf_session *self, pid_t pid);
-size_t perf_session__fprintf(struct perf_session *self, FILE *fp);
+struct thread *perf_session__findnew(struct perf_session *session, pid_t pid);
+size_t perf_session__fprintf(struct perf_session *session, FILE *fp);
 
-size_t perf_session__fprintf_dsos(struct perf_session *self, FILE *fp);
+size_t perf_session__fprintf_dsos(struct perf_session *session, FILE *fp);
 
 size_t perf_session__fprintf_dsos_buildid(struct perf_session *session, FILE *fp,
 					  bool (fn)(struct dso *dso, int parm), int parm);
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index 5f118a0..3c1b75c 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -1,5 +1,6 @@
 #include "sort.h"
 #include "hist.h"
+#include "comm.h"
 #include "symbol.h"
 
 regex_t		parent_regex;
@@ -42,7 +43,7 @@
 	return n;
 }
 
-static int64_t cmp_null(void *l, void *r)
+static int64_t cmp_null(const void *l, const void *r)
 {
 	if (!l && !r)
 		return 0;
@@ -60,11 +61,12 @@
 	return right->thread->tid - left->thread->tid;
 }
 
-static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__thread_snprintf(struct hist_entry *he, char *bf,
 				       size_t size, unsigned int width)
 {
+	const char *comm = thread__comm_str(he->thread);
 	return repsep_snprintf(bf, size, "%*s:%5d", width - 6,
-			      self->thread->comm ?: "", self->thread->tid);
+			       comm ?: "", he->thread->tid);
 }
 
 struct sort_entry sort_thread = {
@@ -79,25 +81,21 @@
 static int64_t
 sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
 {
-	return right->thread->tid - left->thread->tid;
+	/* Compare the addr that should be unique among comm */
+	return comm__str(right->comm) - comm__str(left->comm);
 }
 
 static int64_t
 sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
 {
-	char *comm_l = left->thread->comm;
-	char *comm_r = right->thread->comm;
-
-	if (!comm_l || !comm_r)
-		return cmp_null(comm_l, comm_r);
-
-	return strcmp(comm_l, comm_r);
+	/* Compare the addr that should be unique among comm */
+	return comm__str(right->comm) - comm__str(left->comm);
 }
 
-static int hist_entry__comm_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__comm_snprintf(struct hist_entry *he, char *bf,
 				     size_t size, unsigned int width)
 {
-	return repsep_snprintf(bf, size, "%*s", width, self->thread->comm);
+	return repsep_snprintf(bf, size, "%*s", width, comm__str(he->comm));
 }
 
 struct sort_entry sort_comm = {
@@ -148,10 +146,10 @@
 	return repsep_snprintf(bf, size, "%-*s", width, "[unknown]");
 }
 
-static int hist_entry__dso_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__dso_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
-	return _hist_entry__dso_snprintf(self->ms.map, bf, size, width);
+	return _hist_entry__dso_snprintf(he->ms.map, bf, size, width);
 }
 
 struct sort_entry sort_dso = {
@@ -182,9 +180,19 @@
 static int64_t
 sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
 {
+	int64_t ret;
+
 	if (!left->ms.sym && !right->ms.sym)
 		return right->level - left->level;
 
+	/*
+	 * comparing symbol address alone is not enough since it's a
+	 * relative address within a dso.
+	 */
+	ret = sort__dso_cmp(left, right);
+	if (ret != 0)
+		return ret;
+
 	return _sort__sym_cmp(left->ms.sym, right->ms.sym);
 }
 
@@ -224,11 +232,11 @@
 	return ret;
 }
 
-static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__sym_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
-	return _hist_entry__sym_snprintf(self->ms.map, self->ms.sym, self->ip,
-					 self->level, bf, size, width);
+	return _hist_entry__sym_snprintf(he->ms.map, he->ms.sym, he->ip,
+					 he->level, bf, size, width);
 }
 
 struct sort_entry sort_sym = {
@@ -243,50 +251,32 @@
 static int64_t
 sort__srcline_cmp(struct hist_entry *left, struct hist_entry *right)
 {
-	return (int64_t)(right->ip - left->ip);
+	if (!left->srcline) {
+		if (!left->ms.map)
+			left->srcline = SRCLINE_UNKNOWN;
+		else {
+			struct map *map = left->ms.map;
+			left->srcline = get_srcline(map->dso,
+					    map__rip_2objdump(map, left->ip));
+		}
+	}
+	if (!right->srcline) {
+		if (!right->ms.map)
+			right->srcline = SRCLINE_UNKNOWN;
+		else {
+			struct map *map = right->ms.map;
+			right->srcline = get_srcline(map->dso,
+					    map__rip_2objdump(map, right->ip));
+		}
+	}
+	return strcmp(left->srcline, right->srcline);
 }
 
-static int hist_entry__srcline_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__srcline_snprintf(struct hist_entry *he, char *bf,
 					size_t size,
 					unsigned int width __maybe_unused)
 {
-	FILE *fp = NULL;
-	char cmd[PATH_MAX + 2], *path = self->srcline, *nl;
-	size_t line_len;
-
-	if (path != NULL)
-		goto out_path;
-
-	if (!self->ms.map)
-		goto out_ip;
-
-	if (!strncmp(self->ms.map->dso->long_name, "/tmp/perf-", 10))
-		goto out_ip;
-
-	snprintf(cmd, sizeof(cmd), "addr2line -e %s %016" PRIx64,
-		 self->ms.map->dso->long_name, self->ip);
-	fp = popen(cmd, "r");
-	if (!fp)
-		goto out_ip;
-
-	if (getline(&path, &line_len, fp) < 0 || !line_len)
-		goto out_ip;
-	self->srcline = strdup(path);
-	if (self->srcline == NULL)
-		goto out_ip;
-
-	nl = strchr(self->srcline, '\n');
-	if (nl != NULL)
-		*nl = '\0';
-	path = self->srcline;
-out_path:
-	if (fp)
-		pclose(fp);
-	return repsep_snprintf(bf, size, "%s", path);
-out_ip:
-	if (fp)
-		pclose(fp);
-	return repsep_snprintf(bf, size, "%-#*llx", BITS_PER_LONG / 4, self->ip);
+	return repsep_snprintf(bf, size, "%s", he->srcline);
 }
 
 struct sort_entry sort_srcline = {
@@ -310,11 +300,11 @@
 	return strcmp(sym_l->name, sym_r->name);
 }
 
-static int hist_entry__parent_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__parent_snprintf(struct hist_entry *he, char *bf,
 				       size_t size, unsigned int width)
 {
 	return repsep_snprintf(bf, size, "%-*s", width,
-			      self->parent ? self->parent->name : "[other]");
+			      he->parent ? he->parent->name : "[other]");
 }
 
 struct sort_entry sort_parent = {
@@ -332,10 +322,10 @@
 	return right->cpu - left->cpu;
 }
 
-static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf,
-				       size_t size, unsigned int width)
+static int hist_entry__cpu_snprintf(struct hist_entry *he, char *bf,
+				    size_t size, unsigned int width)
 {
-	return repsep_snprintf(bf, size, "%*d", width, self->cpu);
+	return repsep_snprintf(bf, size, "%*d", width, he->cpu);
 }
 
 struct sort_entry sort_cpu = {
@@ -354,10 +344,10 @@
 			      right->branch_info->from.map);
 }
 
-static int hist_entry__dso_from_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__dso_from_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
-	return _hist_entry__dso_snprintf(self->branch_info->from.map,
+	return _hist_entry__dso_snprintf(he->branch_info->from.map,
 					 bf, size, width);
 }
 
@@ -368,10 +358,10 @@
 			      right->branch_info->to.map);
 }
 
-static int hist_entry__dso_to_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__dso_to_snprintf(struct hist_entry *he, char *bf,
 				       size_t size, unsigned int width)
 {
-	return _hist_entry__dso_snprintf(self->branch_info->to.map,
+	return _hist_entry__dso_snprintf(he->branch_info->to.map,
 					 bf, size, width);
 }
 
@@ -399,21 +389,21 @@
 	return _sort__sym_cmp(to_l->sym, to_r->sym);
 }
 
-static int hist_entry__sym_from_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__sym_from_snprintf(struct hist_entry *he, char *bf,
 					 size_t size, unsigned int width)
 {
-	struct addr_map_symbol *from = &self->branch_info->from;
+	struct addr_map_symbol *from = &he->branch_info->from;
 	return _hist_entry__sym_snprintf(from->map, from->sym, from->addr,
-					 self->level, bf, size, width);
+					 he->level, bf, size, width);
 
 }
 
-static int hist_entry__sym_to_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__sym_to_snprintf(struct hist_entry *he, char *bf,
 				       size_t size, unsigned int width)
 {
-	struct addr_map_symbol *to = &self->branch_info->to;
+	struct addr_map_symbol *to = &he->branch_info->to;
 	return _hist_entry__sym_snprintf(to->map, to->sym, to->addr,
-					 self->level, bf, size, width);
+					 he->level, bf, size, width);
 
 }
 
@@ -456,13 +446,13 @@
 	return mp || p;
 }
 
-static int hist_entry__mispredict_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__mispredict_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width){
 	static const char *out = "N/A";
 
-	if (self->branch_info->flags.predicted)
+	if (he->branch_info->flags.predicted)
 		out = "N";
-	else if (self->branch_info->flags.mispred)
+	else if (he->branch_info->flags.mispred)
 		out = "Y";
 
 	return repsep_snprintf(bf, size, "%-*s", width, out);
@@ -482,19 +472,19 @@
 	return (int64_t)(r - l);
 }
 
-static int hist_entry__daddr_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__daddr_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
 	uint64_t addr = 0;
 	struct map *map = NULL;
 	struct symbol *sym = NULL;
 
-	if (self->mem_info) {
-		addr = self->mem_info->daddr.addr;
-		map = self->mem_info->daddr.map;
-		sym = self->mem_info->daddr.sym;
+	if (he->mem_info) {
+		addr = he->mem_info->daddr.addr;
+		map = he->mem_info->daddr.map;
+		sym = he->mem_info->daddr.sym;
 	}
-	return _hist_entry__sym_snprintf(map, sym, addr, self->level, bf, size,
+	return _hist_entry__sym_snprintf(map, sym, addr, he->level, bf, size,
 					 width);
 }
 
@@ -512,13 +502,13 @@
 	return _sort__dso_cmp(map_l, map_r);
 }
 
-static int hist_entry__dso_daddr_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__dso_daddr_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
 	struct map *map = NULL;
 
-	if (self->mem_info)
-		map = self->mem_info->daddr.map;
+	if (he->mem_info)
+		map = he->mem_info->daddr.map;
 
 	return _hist_entry__dso_snprintf(map, bf, size, width);
 }
@@ -542,14 +532,14 @@
 	return (int64_t)(data_src_r.mem_lock - data_src_l.mem_lock);
 }
 
-static int hist_entry__locked_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__locked_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
 	const char *out;
 	u64 mask = PERF_MEM_LOCK_NA;
 
-	if (self->mem_info)
-		mask = self->mem_info->data_src.mem_lock;
+	if (he->mem_info)
+		mask = he->mem_info->data_src.mem_lock;
 
 	if (mask & PERF_MEM_LOCK_NA)
 		out = "N/A";
@@ -591,7 +581,7 @@
 };
 #define NUM_TLB_ACCESS (sizeof(tlb_access)/sizeof(const char *))
 
-static int hist_entry__tlb_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__tlb_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
 	char out[64];
@@ -602,8 +592,8 @@
 
 	out[0] = '\0';
 
-	if (self->mem_info)
-		m = self->mem_info->data_src.mem_dtlb;
+	if (he->mem_info)
+		m = he->mem_info->data_src.mem_dtlb;
 
 	hit = m & PERF_MEM_TLB_HIT;
 	miss = m & PERF_MEM_TLB_MISS;
@@ -668,7 +658,7 @@
 };
 #define NUM_MEM_LVL (sizeof(mem_lvl)/sizeof(const char *))
 
-static int hist_entry__lvl_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__lvl_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
 	char out[64];
@@ -677,8 +667,8 @@
 	u64 m =  PERF_MEM_LVL_NA;
 	u64 hit, miss;
 
-	if (self->mem_info)
-		m  = self->mem_info->data_src.mem_lvl;
+	if (he->mem_info)
+		m  = he->mem_info->data_src.mem_lvl;
 
 	out[0] = '\0';
 
@@ -736,7 +726,7 @@
 };
 #define NUM_SNOOP_ACCESS (sizeof(snoop_access)/sizeof(const char *))
 
-static int hist_entry__snoop_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__snoop_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
 	char out[64];
@@ -746,8 +736,8 @@
 
 	out[0] = '\0';
 
-	if (self->mem_info)
-		m = self->mem_info->data_src.mem_snoop;
+	if (he->mem_info)
+		m = he->mem_info->data_src.mem_snoop;
 
 	for (i = 0; m && i < NUM_SNOOP_ACCESS; i++, m >>= 1) {
 		if (!(m & 0x1))
@@ -784,10 +774,10 @@
 	return he_weight(left) - he_weight(right);
 }
 
-static int hist_entry__local_weight_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__local_weight_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
-	return repsep_snprintf(bf, size, "%-*llu", width, he_weight(self));
+	return repsep_snprintf(bf, size, "%-*llu", width, he_weight(he));
 }
 
 struct sort_entry sort_local_weight = {
@@ -803,10 +793,10 @@
 	return left->stat.weight - right->stat.weight;
 }
 
-static int hist_entry__global_weight_snprintf(struct hist_entry *self, char *bf,
+static int hist_entry__global_weight_snprintf(struct hist_entry *he, char *bf,
 					      size_t size, unsigned int width)
 {
-	return repsep_snprintf(bf, size, "%-*llu", width, self->stat.weight);
+	return repsep_snprintf(bf, size, "%-*llu", width, he->stat.weight);
 }
 
 struct sort_entry sort_global_weight = {
@@ -858,6 +848,127 @@
 	.se_width_idx	= HISTC_MEM_SNOOP,
 };
 
+static int64_t
+sort__abort_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return left->branch_info->flags.abort !=
+		right->branch_info->flags.abort;
+}
+
+static int hist_entry__abort_snprintf(struct hist_entry *he, char *bf,
+				    size_t size, unsigned int width)
+{
+	static const char *out = ".";
+
+	if (he->branch_info->flags.abort)
+		out = "A";
+	return repsep_snprintf(bf, size, "%-*s", width, out);
+}
+
+struct sort_entry sort_abort = {
+	.se_header	= "Transaction abort",
+	.se_cmp		= sort__abort_cmp,
+	.se_snprintf	= hist_entry__abort_snprintf,
+	.se_width_idx	= HISTC_ABORT,
+};
+
+static int64_t
+sort__in_tx_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return left->branch_info->flags.in_tx !=
+		right->branch_info->flags.in_tx;
+}
+
+static int hist_entry__in_tx_snprintf(struct hist_entry *he, char *bf,
+				    size_t size, unsigned int width)
+{
+	static const char *out = ".";
+
+	if (he->branch_info->flags.in_tx)
+		out = "T";
+
+	return repsep_snprintf(bf, size, "%-*s", width, out);
+}
+
+struct sort_entry sort_in_tx = {
+	.se_header	= "Branch in transaction",
+	.se_cmp		= sort__in_tx_cmp,
+	.se_snprintf	= hist_entry__in_tx_snprintf,
+	.se_width_idx	= HISTC_IN_TX,
+};
+
+static int64_t
+sort__transaction_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return left->transaction - right->transaction;
+}
+
+static inline char *add_str(char *p, const char *str)
+{
+	strcpy(p, str);
+	return p + strlen(str);
+}
+
+static struct txbit {
+	unsigned flag;
+	const char *name;
+	int skip_for_len;
+} txbits[] = {
+	{ PERF_TXN_ELISION,        "EL ",        0 },
+	{ PERF_TXN_TRANSACTION,    "TX ",        1 },
+	{ PERF_TXN_SYNC,           "SYNC ",      1 },
+	{ PERF_TXN_ASYNC,          "ASYNC ",     0 },
+	{ PERF_TXN_RETRY,          "RETRY ",     0 },
+	{ PERF_TXN_CONFLICT,       "CON ",       0 },
+	{ PERF_TXN_CAPACITY_WRITE, "CAP-WRITE ", 1 },
+	{ PERF_TXN_CAPACITY_READ,  "CAP-READ ",  0 },
+	{ 0, NULL, 0 }
+};
+
+int hist_entry__transaction_len(void)
+{
+	int i;
+	int len = 0;
+
+	for (i = 0; txbits[i].name; i++) {
+		if (!txbits[i].skip_for_len)
+			len += strlen(txbits[i].name);
+	}
+	len += 4; /* :XX<space> */
+	return len;
+}
+
+static int hist_entry__transaction_snprintf(struct hist_entry *he, char *bf,
+					    size_t size, unsigned int width)
+{
+	u64 t = he->transaction;
+	char buf[128];
+	char *p = buf;
+	int i;
+
+	buf[0] = 0;
+	for (i = 0; txbits[i].name; i++)
+		if (txbits[i].flag & t)
+			p = add_str(p, txbits[i].name);
+	if (t && !(t & (PERF_TXN_SYNC|PERF_TXN_ASYNC)))
+		p = add_str(p, "NEITHER ");
+	if (t & PERF_TXN_ABORT_MASK) {
+		sprintf(p, ":%" PRIx64,
+			(t & PERF_TXN_ABORT_MASK) >>
+			PERF_TXN_ABORT_SHIFT);
+		p += strlen(p);
+	}
+
+	return repsep_snprintf(bf, size, "%-*s", width, buf);
+}
+
+struct sort_entry sort_transaction = {
+	.se_header	= "Transaction                ",
+	.se_cmp		= sort__transaction_cmp,
+	.se_snprintf	= hist_entry__transaction_snprintf,
+	.se_width_idx	= HISTC_TRANSACTION,
+};
+
 struct sort_dimension {
 	const char		*name;
 	struct sort_entry	*entry;
@@ -876,6 +987,7 @@
 	DIM(SORT_SRCLINE, "srcline", sort_srcline),
 	DIM(SORT_LOCAL_WEIGHT, "local_weight", sort_local_weight),
 	DIM(SORT_GLOBAL_WEIGHT, "weight", sort_global_weight),
+	DIM(SORT_TRANSACTION, "transaction", sort_transaction),
 };
 
 #undef DIM
@@ -888,6 +1000,8 @@
 	DIM(SORT_SYM_FROM, "symbol_from", sort_sym_from),
 	DIM(SORT_SYM_TO, "symbol_to", sort_sym_to),
 	DIM(SORT_MISPREDICT, "mispredict", sort_mispredict),
+	DIM(SORT_IN_TX, "in_tx", sort_in_tx),
+	DIM(SORT_ABORT, "abort", sort_abort),
 };
 
 #undef DIM
@@ -1009,7 +1123,7 @@
 	return ret;
 }
 
-static void sort_entry__setup_elide(struct sort_entry *self,
+static void sort_entry__setup_elide(struct sort_entry *se,
 				    struct strlist *list,
 				    const char *list_name, FILE *fp)
 {
@@ -1017,7 +1131,7 @@
 		if (fp != NULL)
 			fprintf(fp, "# %s: %s\n", list_name,
 				strlist__entry(list, 0)->s);
-		self->elide = true;
+		se->elide = true;
 	}
 }
 
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index 4e80dbd..43e5ff4 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -22,7 +22,6 @@
 #include "parse-events.h"
 
 #include "thread.h"
-#include "sort.h"
 
 extern regex_t parent_regex;
 extern const char *sort_order;
@@ -84,7 +83,9 @@
 	struct he_stat		stat;
 	struct map_symbol	ms;
 	struct thread		*thread;
+	struct comm		*comm;
 	u64			ip;
+	u64			transaction;
 	s32			cpu;
 
 	struct hist_entry_diff	diff;
@@ -145,6 +146,7 @@
 	SORT_SRCLINE,
 	SORT_LOCAL_WEIGHT,
 	SORT_GLOBAL_WEIGHT,
+	SORT_TRANSACTION,
 
 	/* branch stack specific sort keys */
 	__SORT_BRANCH_STACK,
@@ -153,6 +155,8 @@
 	SORT_SYM_FROM,
 	SORT_SYM_TO,
 	SORT_MISPREDICT,
+	SORT_ABORT,
+	SORT_IN_TX,
 
 	/* memory mode specific sort keys */
 	__SORT_MEMORY_MODE,
@@ -175,7 +179,7 @@
 
 	int64_t (*se_cmp)(struct hist_entry *, struct hist_entry *);
 	int64_t (*se_collapse)(struct hist_entry *, struct hist_entry *);
-	int	(*se_snprintf)(struct hist_entry *self, char *bf, size_t size,
+	int	(*se_snprintf)(struct hist_entry *he, char *bf, size_t size,
 			       unsigned int width);
 	u8	se_width_idx;
 	bool	elide;
diff --git a/tools/perf/util/srcline.c b/tools/perf/util/srcline.c
new file mode 100644
index 0000000..d11aefb
--- /dev/null
+++ b/tools/perf/util/srcline.c
@@ -0,0 +1,265 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <linux/kernel.h>
+
+#include "util/dso.h"
+#include "util/util.h"
+#include "util/debug.h"
+
+#ifdef HAVE_LIBBFD_SUPPORT
+
+/*
+ * Implement addr2line using libbfd.
+ */
+#define PACKAGE "perf"
+#include <bfd.h>
+
+struct a2l_data {
+	const char 	*input;
+	unsigned long 	addr;
+
+	bool 		found;
+	const char 	*filename;
+	const char 	*funcname;
+	unsigned 	line;
+
+	bfd 		*abfd;
+	asymbol 	**syms;
+};
+
+static int bfd_error(const char *string)
+{
+	const char *errmsg;
+
+	errmsg = bfd_errmsg(bfd_get_error());
+	fflush(stdout);
+
+	if (string)
+		pr_debug("%s: %s\n", string, errmsg);
+	else
+		pr_debug("%s\n", errmsg);
+
+	return -1;
+}
+
+static int slurp_symtab(bfd *abfd, struct a2l_data *a2l)
+{
+	long storage;
+	long symcount;
+	asymbol **syms;
+	bfd_boolean dynamic = FALSE;
+
+	if ((bfd_get_file_flags(abfd) & HAS_SYMS) == 0)
+		return bfd_error(bfd_get_filename(abfd));
+
+	storage = bfd_get_symtab_upper_bound(abfd);
+	if (storage == 0L) {
+		storage = bfd_get_dynamic_symtab_upper_bound(abfd);
+		dynamic = TRUE;
+	}
+	if (storage < 0L)
+		return bfd_error(bfd_get_filename(abfd));
+
+	syms = malloc(storage);
+	if (dynamic)
+		symcount = bfd_canonicalize_dynamic_symtab(abfd, syms);
+	else
+		symcount = bfd_canonicalize_symtab(abfd, syms);
+
+	if (symcount < 0) {
+		free(syms);
+		return bfd_error(bfd_get_filename(abfd));
+	}
+
+	a2l->syms = syms;
+	return 0;
+}
+
+static void find_address_in_section(bfd *abfd, asection *section, void *data)
+{
+	bfd_vma pc, vma;
+	bfd_size_type size;
+	struct a2l_data *a2l = data;
+
+	if (a2l->found)
+		return;
+
+	if ((bfd_get_section_flags(abfd, section) & SEC_ALLOC) == 0)
+		return;
+
+	pc = a2l->addr;
+	vma = bfd_get_section_vma(abfd, section);
+	size = bfd_get_section_size(section);
+
+	if (pc < vma || pc >= vma + size)
+		return;
+
+	a2l->found = bfd_find_nearest_line(abfd, section, a2l->syms, pc - vma,
+					   &a2l->filename, &a2l->funcname,
+					   &a2l->line);
+}
+
+static struct a2l_data *addr2line_init(const char *path)
+{
+	bfd *abfd;
+	struct a2l_data *a2l = NULL;
+
+	abfd = bfd_openr(path, NULL);
+	if (abfd == NULL)
+		return NULL;
+
+	if (!bfd_check_format(abfd, bfd_object))
+		goto out;
+
+	a2l = zalloc(sizeof(*a2l));
+	if (a2l == NULL)
+		goto out;
+
+	a2l->abfd = abfd;
+	a2l->input = strdup(path);
+	if (a2l->input == NULL)
+		goto out;
+
+	if (slurp_symtab(abfd, a2l))
+		goto out;
+
+	return a2l;
+
+out:
+	if (a2l) {
+		free((void *)a2l->input);
+		free(a2l);
+	}
+	bfd_close(abfd);
+	return NULL;
+}
+
+static void addr2line_cleanup(struct a2l_data *a2l)
+{
+	if (a2l->abfd)
+		bfd_close(a2l->abfd);
+	free((void *)a2l->input);
+	free(a2l->syms);
+	free(a2l);
+}
+
+static int addr2line(const char *dso_name, unsigned long addr,
+		     char **file, unsigned int *line)
+{
+	int ret = 0;
+	struct a2l_data *a2l;
+
+	a2l = addr2line_init(dso_name);
+	if (a2l == NULL) {
+		pr_warning("addr2line_init failed for %s\n", dso_name);
+		return 0;
+	}
+
+	a2l->addr = addr;
+	bfd_map_over_sections(a2l->abfd, find_address_in_section, a2l);
+
+	if (a2l->found && a2l->filename) {
+		*file = strdup(a2l->filename);
+		*line = a2l->line;
+
+		if (*file)
+			ret = 1;
+	}
+
+	addr2line_cleanup(a2l);
+	return ret;
+}
+
+#else /* HAVE_LIBBFD_SUPPORT */
+
+static int addr2line(const char *dso_name, unsigned long addr,
+		     char **file, unsigned int *line_nr)
+{
+	FILE *fp;
+	char cmd[PATH_MAX];
+	char *filename = NULL;
+	size_t len;
+	char *sep;
+	int ret = 0;
+
+	scnprintf(cmd, sizeof(cmd), "addr2line -e %s %016"PRIx64,
+		  dso_name, addr);
+
+	fp = popen(cmd, "r");
+	if (fp == NULL) {
+		pr_warning("popen failed for %s\n", dso_name);
+		return 0;
+	}
+
+	if (getline(&filename, &len, fp) < 0 || !len) {
+		pr_warning("addr2line has no output for %s\n", dso_name);
+		goto out;
+	}
+
+	sep = strchr(filename, '\n');
+	if (sep)
+		*sep = '\0';
+
+	if (!strcmp(filename, "??:0")) {
+		pr_debug("no debugging info in %s\n", dso_name);
+		free(filename);
+		goto out;
+	}
+
+	sep = strchr(filename, ':');
+	if (sep) {
+		*sep++ = '\0';
+		*file = filename;
+		*line_nr = strtoul(sep, NULL, 0);
+		ret = 1;
+	}
+out:
+	pclose(fp);
+	return ret;
+}
+#endif /* HAVE_LIBBFD_SUPPORT */
+
+char *get_srcline(struct dso *dso, unsigned long addr)
+{
+	char *file = NULL;
+	unsigned line = 0;
+	char *srcline;
+	char *dso_name = dso->long_name;
+	size_t size;
+
+	if (!dso->has_srcline)
+		return SRCLINE_UNKNOWN;
+
+	if (dso_name[0] == '[')
+		goto out;
+
+	if (!strncmp(dso_name, "/tmp/perf-", 10))
+		goto out;
+
+	if (!addr2line(dso_name, addr, &file, &line))
+		goto out;
+
+	/* just calculate actual length */
+	size = snprintf(NULL, 0, "%s:%u", file, line) + 1;
+
+	srcline = malloc(size);
+	if (srcline)
+		snprintf(srcline, size, "%s:%u", file, line);
+	else
+		srcline = SRCLINE_UNKNOWN;
+
+	free(file);
+	return srcline;
+
+out:
+	dso->has_srcline = 0;
+	return SRCLINE_UNKNOWN;
+}
+
+void free_srcline(char *srcline)
+{
+	if (srcline && strcmp(srcline, SRCLINE_UNKNOWN) != 0)
+		free(srcline);
+}
diff --git a/tools/perf/util/strfilter.c b/tools/perf/util/strfilter.c
index 834c8eb..3edd053 100644
--- a/tools/perf/util/strfilter.c
+++ b/tools/perf/util/strfilter.c
@@ -10,22 +10,22 @@
 #define is_operator(c)	((c) == '|' || (c) == '&' || (c) == '!')
 #define is_separator(c)	(is_operator(c) || (c) == '(' || (c) == ')')
 
-static void strfilter_node__delete(struct strfilter_node *self)
+static void strfilter_node__delete(struct strfilter_node *node)
 {
-	if (self) {
-		if (self->p && !is_operator(*self->p))
-			free((char *)self->p);
-		strfilter_node__delete(self->l);
-		strfilter_node__delete(self->r);
-		free(self);
+	if (node) {
+		if (node->p && !is_operator(*node->p))
+			free((char *)node->p);
+		strfilter_node__delete(node->l);
+		strfilter_node__delete(node->r);
+		free(node);
 	}
 }
 
-void strfilter__delete(struct strfilter *self)
+void strfilter__delete(struct strfilter *filter)
 {
-	if (self) {
-		strfilter_node__delete(self->root);
-		free(self);
+	if (filter) {
+		strfilter_node__delete(filter->root);
+		free(filter);
 	}
 }
 
@@ -62,15 +62,15 @@
 						    struct strfilter_node *l,
 						    struct strfilter_node *r)
 {
-	struct strfilter_node *ret = zalloc(sizeof(struct strfilter_node));
+	struct strfilter_node *node = zalloc(sizeof(*node));
 
-	if (ret) {
-		ret->p = op;
-		ret->l = l;
-		ret->r = r;
+	if (node) {
+		node->p = op;
+		node->l = l;
+		node->r = r;
 	}
 
-	return ret;
+	return node;
 }
 
 static struct strfilter_node *strfilter_node__new(const char *s,
@@ -154,46 +154,46 @@
  */
 struct strfilter *strfilter__new(const char *rules, const char **err)
 {
-	struct strfilter *ret = zalloc(sizeof(struct strfilter));
+	struct strfilter *filter = zalloc(sizeof(*filter));
 	const char *ep = NULL;
 
-	if (ret)
-		ret->root = strfilter_node__new(rules, &ep);
+	if (filter)
+		filter->root = strfilter_node__new(rules, &ep);
 
-	if (!ret || !ret->root || *ep != '\0') {
+	if (!filter || !filter->root || *ep != '\0') {
 		if (err)
 			*err = ep;
-		strfilter__delete(ret);
-		ret = NULL;
+		strfilter__delete(filter);
+		filter = NULL;
 	}
 
-	return ret;
+	return filter;
 }
 
-static bool strfilter_node__compare(struct strfilter_node *self,
+static bool strfilter_node__compare(struct strfilter_node *node,
 				    const char *str)
 {
-	if (!self || !self->p)
+	if (!node || !node->p)
 		return false;
 
-	switch (*self->p) {
+	switch (*node->p) {
 	case '|':	/* OR */
-		return strfilter_node__compare(self->l, str) ||
-			strfilter_node__compare(self->r, str);
+		return strfilter_node__compare(node->l, str) ||
+			strfilter_node__compare(node->r, str);
 	case '&':	/* AND */
-		return strfilter_node__compare(self->l, str) &&
-			strfilter_node__compare(self->r, str);
+		return strfilter_node__compare(node->l, str) &&
+			strfilter_node__compare(node->r, str);
 	case '!':	/* NOT */
-		return !strfilter_node__compare(self->r, str);
+		return !strfilter_node__compare(node->r, str);
 	default:
-		return strglobmatch(str, self->p);
+		return strglobmatch(str, node->p);
 	}
 }
 
 /* Return true if STR matches the filter rules */
-bool strfilter__compare(struct strfilter *self, const char *str)
+bool strfilter__compare(struct strfilter *filter, const char *str)
 {
-	if (!self)
+	if (!filter)
 		return false;
-	return strfilter_node__compare(self->root, str);
+	return strfilter_node__compare(filter->root, str);
 }
diff --git a/tools/perf/util/strfilter.h b/tools/perf/util/strfilter.h
index 00f58a7..fe611f3 100644
--- a/tools/perf/util/strfilter.h
+++ b/tools/perf/util/strfilter.h
@@ -30,19 +30,19 @@
 
 /**
  * strfilter__compare - compare given string and a string filter
- * @self: String filter
+ * @filter: String filter
  * @str: target string
  *
- * Compare @str and @self. Return true if the str match the rule
+ * Compare @str and @filter. Return true if the str match the rule
  */
-bool strfilter__compare(struct strfilter *self, const char *str);
+bool strfilter__compare(struct strfilter *filter, const char *str);
 
 /**
  * strfilter__delete - delete a string filter
- * @self: String filter to delete
+ * @filter: String filter to delete
  *
- * Delete @self.
+ * Delete @filter.
  */
-void strfilter__delete(struct strfilter *self);
+void strfilter__delete(struct strfilter *filter);
 
 #endif
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index a9c829b..eed0b96 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -8,7 +8,7 @@
 #include "symbol.h"
 #include "debug.h"
 
-#ifndef HAVE_ELF_GETPHDRNUM
+#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT
 static int elf_getphdrnum(Elf *elf, size_t *dst)
 {
 	GElf_Ehdr gehdr;
@@ -487,27 +487,27 @@
 
 	ek = elf_kind(elf);
 	if (ek != ELF_K_ELF)
-		goto out_close;
+		goto out_elf_end;
 
 	if (gelf_getehdr(elf, &ehdr) == NULL) {
 		pr_err("%s: cannot get elf header.\n", __func__);
-		goto out_close;
+		goto out_elf_end;
 	}
 
 	sec = elf_section_by_name(elf, &ehdr, &shdr,
 				  ".gnu_debuglink", NULL);
 	if (sec == NULL)
-		goto out_close;
+		goto out_elf_end;
 
 	data = elf_getdata(sec, NULL);
 	if (data == NULL)
-		goto out_close;
+		goto out_elf_end;
 
 	/* the start of this section is a zero-terminated string */
 	strncpy(debuglink, data->d_buf, size);
 
+out_elf_end:
 	elf_end(elf);
-
 out_close:
 	close(fd);
 out:
@@ -1018,6 +1018,601 @@
 	return err;
 }
 
+static int copy_bytes(int from, off_t from_offs, int to, off_t to_offs, u64 len)
+{
+	ssize_t r;
+	size_t n;
+	int err = -1;
+	char *buf = malloc(page_size);
+
+	if (buf == NULL)
+		return -1;
+
+	if (lseek(to, to_offs, SEEK_SET) != to_offs)
+		goto out;
+
+	if (lseek(from, from_offs, SEEK_SET) != from_offs)
+		goto out;
+
+	while (len) {
+		n = page_size;
+		if (len < n)
+			n = len;
+		/* Use read because mmap won't work on proc files */
+		r = read(from, buf, n);
+		if (r < 0)
+			goto out;
+		if (!r)
+			break;
+		n = r;
+		r = write(to, buf, n);
+		if (r < 0)
+			goto out;
+		if ((size_t)r != n)
+			goto out;
+		len -= n;
+	}
+
+	err = 0;
+out:
+	free(buf);
+	return err;
+}
+
+struct kcore {
+	int fd;
+	int elfclass;
+	Elf *elf;
+	GElf_Ehdr ehdr;
+};
+
+static int kcore__open(struct kcore *kcore, const char *filename)
+{
+	GElf_Ehdr *ehdr;
+
+	kcore->fd = open(filename, O_RDONLY);
+	if (kcore->fd == -1)
+		return -1;
+
+	kcore->elf = elf_begin(kcore->fd, ELF_C_READ, NULL);
+	if (!kcore->elf)
+		goto out_close;
+
+	kcore->elfclass = gelf_getclass(kcore->elf);
+	if (kcore->elfclass == ELFCLASSNONE)
+		goto out_end;
+
+	ehdr = gelf_getehdr(kcore->elf, &kcore->ehdr);
+	if (!ehdr)
+		goto out_end;
+
+	return 0;
+
+out_end:
+	elf_end(kcore->elf);
+out_close:
+	close(kcore->fd);
+	return -1;
+}
+
+static int kcore__init(struct kcore *kcore, char *filename, int elfclass,
+		       bool temp)
+{
+	GElf_Ehdr *ehdr;
+
+	kcore->elfclass = elfclass;
+
+	if (temp)
+		kcore->fd = mkstemp(filename);
+	else
+		kcore->fd = open(filename, O_WRONLY | O_CREAT | O_EXCL, 0400);
+	if (kcore->fd == -1)
+		return -1;
+
+	kcore->elf = elf_begin(kcore->fd, ELF_C_WRITE, NULL);
+	if (!kcore->elf)
+		goto out_close;
+
+	if (!gelf_newehdr(kcore->elf, elfclass))
+		goto out_end;
+
+	ehdr = gelf_getehdr(kcore->elf, &kcore->ehdr);
+	if (!ehdr)
+		goto out_end;
+
+	return 0;
+
+out_end:
+	elf_end(kcore->elf);
+out_close:
+	close(kcore->fd);
+	unlink(filename);
+	return -1;
+}
+
+static void kcore__close(struct kcore *kcore)
+{
+	elf_end(kcore->elf);
+	close(kcore->fd);
+}
+
+static int kcore__copy_hdr(struct kcore *from, struct kcore *to, size_t count)
+{
+	GElf_Ehdr *ehdr = &to->ehdr;
+	GElf_Ehdr *kehdr = &from->ehdr;
+
+	memcpy(ehdr->e_ident, kehdr->e_ident, EI_NIDENT);
+	ehdr->e_type      = kehdr->e_type;
+	ehdr->e_machine   = kehdr->e_machine;
+	ehdr->e_version   = kehdr->e_version;
+	ehdr->e_entry     = 0;
+	ehdr->e_shoff     = 0;
+	ehdr->e_flags     = kehdr->e_flags;
+	ehdr->e_phnum     = count;
+	ehdr->e_shentsize = 0;
+	ehdr->e_shnum     = 0;
+	ehdr->e_shstrndx  = 0;
+
+	if (from->elfclass == ELFCLASS32) {
+		ehdr->e_phoff     = sizeof(Elf32_Ehdr);
+		ehdr->e_ehsize    = sizeof(Elf32_Ehdr);
+		ehdr->e_phentsize = sizeof(Elf32_Phdr);
+	} else {
+		ehdr->e_phoff     = sizeof(Elf64_Ehdr);
+		ehdr->e_ehsize    = sizeof(Elf64_Ehdr);
+		ehdr->e_phentsize = sizeof(Elf64_Phdr);
+	}
+
+	if (!gelf_update_ehdr(to->elf, ehdr))
+		return -1;
+
+	if (!gelf_newphdr(to->elf, count))
+		return -1;
+
+	return 0;
+}
+
+static int kcore__add_phdr(struct kcore *kcore, int idx, off_t offset,
+			   u64 addr, u64 len)
+{
+	GElf_Phdr gphdr;
+	GElf_Phdr *phdr;
+
+	phdr = gelf_getphdr(kcore->elf, idx, &gphdr);
+	if (!phdr)
+		return -1;
+
+	phdr->p_type	= PT_LOAD;
+	phdr->p_flags	= PF_R | PF_W | PF_X;
+	phdr->p_offset	= offset;
+	phdr->p_vaddr	= addr;
+	phdr->p_paddr	= 0;
+	phdr->p_filesz	= len;
+	phdr->p_memsz	= len;
+	phdr->p_align	= page_size;
+
+	if (!gelf_update_phdr(kcore->elf, idx, phdr))
+		return -1;
+
+	return 0;
+}
+
+static off_t kcore__write(struct kcore *kcore)
+{
+	return elf_update(kcore->elf, ELF_C_WRITE);
+}
+
+struct phdr_data {
+	off_t offset;
+	u64 addr;
+	u64 len;
+};
+
+struct kcore_copy_info {
+	u64 stext;
+	u64 etext;
+	u64 first_symbol;
+	u64 last_symbol;
+	u64 first_module;
+	u64 last_module_symbol;
+	struct phdr_data kernel_map;
+	struct phdr_data modules_map;
+};
+
+static int kcore_copy__process_kallsyms(void *arg, const char *name, char type,
+					u64 start)
+{
+	struct kcore_copy_info *kci = arg;
+
+	if (!symbol_type__is_a(type, MAP__FUNCTION))
+		return 0;
+
+	if (strchr(name, '[')) {
+		if (start > kci->last_module_symbol)
+			kci->last_module_symbol = start;
+		return 0;
+	}
+
+	if (!kci->first_symbol || start < kci->first_symbol)
+		kci->first_symbol = start;
+
+	if (!kci->last_symbol || start > kci->last_symbol)
+		kci->last_symbol = start;
+
+	if (!strcmp(name, "_stext")) {
+		kci->stext = start;
+		return 0;
+	}
+
+	if (!strcmp(name, "_etext")) {
+		kci->etext = start;
+		return 0;
+	}
+
+	return 0;
+}
+
+static int kcore_copy__parse_kallsyms(struct kcore_copy_info *kci,
+				      const char *dir)
+{
+	char kallsyms_filename[PATH_MAX];
+
+	scnprintf(kallsyms_filename, PATH_MAX, "%s/kallsyms", dir);
+
+	if (symbol__restricted_filename(kallsyms_filename, "/proc/kallsyms"))
+		return -1;
+
+	if (kallsyms__parse(kallsyms_filename, kci,
+			    kcore_copy__process_kallsyms) < 0)
+		return -1;
+
+	return 0;
+}
+
+static int kcore_copy__process_modules(void *arg,
+				       const char *name __maybe_unused,
+				       u64 start)
+{
+	struct kcore_copy_info *kci = arg;
+
+	if (!kci->first_module || start < kci->first_module)
+		kci->first_module = start;
+
+	return 0;
+}
+
+static int kcore_copy__parse_modules(struct kcore_copy_info *kci,
+				     const char *dir)
+{
+	char modules_filename[PATH_MAX];
+
+	scnprintf(modules_filename, PATH_MAX, "%s/modules", dir);
+
+	if (symbol__restricted_filename(modules_filename, "/proc/modules"))
+		return -1;
+
+	if (modules__parse(modules_filename, kci,
+			   kcore_copy__process_modules) < 0)
+		return -1;
+
+	return 0;
+}
+
+static void kcore_copy__map(struct phdr_data *p, u64 start, u64 end, u64 pgoff,
+			    u64 s, u64 e)
+{
+	if (p->addr || s < start || s >= end)
+		return;
+
+	p->addr = s;
+	p->offset = (s - start) + pgoff;
+	p->len = e < end ? e - s : end - s;
+}
+
+static int kcore_copy__read_map(u64 start, u64 len, u64 pgoff, void *data)
+{
+	struct kcore_copy_info *kci = data;
+	u64 end = start + len;
+
+	kcore_copy__map(&kci->kernel_map, start, end, pgoff, kci->stext,
+			kci->etext);
+
+	kcore_copy__map(&kci->modules_map, start, end, pgoff, kci->first_module,
+			kci->last_module_symbol);
+
+	return 0;
+}
+
+static int kcore_copy__read_maps(struct kcore_copy_info *kci, Elf *elf)
+{
+	if (elf_read_maps(elf, true, kcore_copy__read_map, kci) < 0)
+		return -1;
+
+	return 0;
+}
+
+static int kcore_copy__calc_maps(struct kcore_copy_info *kci, const char *dir,
+				 Elf *elf)
+{
+	if (kcore_copy__parse_kallsyms(kci, dir))
+		return -1;
+
+	if (kcore_copy__parse_modules(kci, dir))
+		return -1;
+
+	if (kci->stext)
+		kci->stext = round_down(kci->stext, page_size);
+	else
+		kci->stext = round_down(kci->first_symbol, page_size);
+
+	if (kci->etext) {
+		kci->etext = round_up(kci->etext, page_size);
+	} else if (kci->last_symbol) {
+		kci->etext = round_up(kci->last_symbol, page_size);
+		kci->etext += page_size;
+	}
+
+	kci->first_module = round_down(kci->first_module, page_size);
+
+	if (kci->last_module_symbol) {
+		kci->last_module_symbol = round_up(kci->last_module_symbol,
+						   page_size);
+		kci->last_module_symbol += page_size;
+	}
+
+	if (!kci->stext || !kci->etext)
+		return -1;
+
+	if (kci->first_module && !kci->last_module_symbol)
+		return -1;
+
+	return kcore_copy__read_maps(kci, elf);
+}
+
+static int kcore_copy__copy_file(const char *from_dir, const char *to_dir,
+				 const char *name)
+{
+	char from_filename[PATH_MAX];
+	char to_filename[PATH_MAX];
+
+	scnprintf(from_filename, PATH_MAX, "%s/%s", from_dir, name);
+	scnprintf(to_filename, PATH_MAX, "%s/%s", to_dir, name);
+
+	return copyfile_mode(from_filename, to_filename, 0400);
+}
+
+static int kcore_copy__unlink(const char *dir, const char *name)
+{
+	char filename[PATH_MAX];
+
+	scnprintf(filename, PATH_MAX, "%s/%s", dir, name);
+
+	return unlink(filename);
+}
+
+static int kcore_copy__compare_fds(int from, int to)
+{
+	char *buf_from;
+	char *buf_to;
+	ssize_t ret;
+	size_t len;
+	int err = -1;
+
+	buf_from = malloc(page_size);
+	buf_to = malloc(page_size);
+	if (!buf_from || !buf_to)
+		goto out;
+
+	while (1) {
+		/* Use read because mmap won't work on proc files */
+		ret = read(from, buf_from, page_size);
+		if (ret < 0)
+			goto out;
+
+		if (!ret)
+			break;
+
+		len = ret;
+
+		if (readn(to, buf_to, len) != (int)len)
+			goto out;
+
+		if (memcmp(buf_from, buf_to, len))
+			goto out;
+	}
+
+	err = 0;
+out:
+	free(buf_to);
+	free(buf_from);
+	return err;
+}
+
+static int kcore_copy__compare_files(const char *from_filename,
+				     const char *to_filename)
+{
+	int from, to, err = -1;
+
+	from = open(from_filename, O_RDONLY);
+	if (from < 0)
+		return -1;
+
+	to = open(to_filename, O_RDONLY);
+	if (to < 0)
+		goto out_close_from;
+
+	err = kcore_copy__compare_fds(from, to);
+
+	close(to);
+out_close_from:
+	close(from);
+	return err;
+}
+
+static int kcore_copy__compare_file(const char *from_dir, const char *to_dir,
+				    const char *name)
+{
+	char from_filename[PATH_MAX];
+	char to_filename[PATH_MAX];
+
+	scnprintf(from_filename, PATH_MAX, "%s/%s", from_dir, name);
+	scnprintf(to_filename, PATH_MAX, "%s/%s", to_dir, name);
+
+	return kcore_copy__compare_files(from_filename, to_filename);
+}
+
+/**
+ * kcore_copy - copy kallsyms, modules and kcore from one directory to another.
+ * @from_dir: from directory
+ * @to_dir: to directory
+ *
+ * This function copies kallsyms, modules and kcore files from one directory to
+ * another.  kallsyms and modules are copied entirely.  Only code segments are
+ * copied from kcore.  It is assumed that two segments suffice: one for the
+ * kernel proper and one for all the modules.  The code segments are determined
+ * from kallsyms and modules files.  The kernel map starts at _stext or the
+ * lowest function symbol, and ends at _etext or the highest function symbol.
+ * The module map starts at the lowest module address and ends at the highest
+ * module symbol.  Start addresses are rounded down to the nearest page.  End
+ * addresses are rounded up to the nearest page.  An extra page is added to the
+ * highest kernel symbol and highest module symbol to, hopefully, encompass that
+ * symbol too.  Because it contains only code sections, the resulting kcore is
+ * unusual.  One significant peculiarity is that the mapping (start -> pgoff)
+ * is not the same for the kernel map and the modules map.  That happens because
+ * the data is copied adjacently whereas the original kcore has gaps.  Finally,
+ * kallsyms and modules files are compared with their copies to check that
+ * modules have not been loaded or unloaded while the copies were taking place.
+ *
+ * Return: %0 on success, %-1 on failure.
+ */
+int kcore_copy(const char *from_dir, const char *to_dir)
+{
+	struct kcore kcore;
+	struct kcore extract;
+	size_t count = 2;
+	int idx = 0, err = -1;
+	off_t offset = page_size, sz, modules_offset = 0;
+	struct kcore_copy_info kci = { .stext = 0, };
+	char kcore_filename[PATH_MAX];
+	char extract_filename[PATH_MAX];
+
+	if (kcore_copy__copy_file(from_dir, to_dir, "kallsyms"))
+		return -1;
+
+	if (kcore_copy__copy_file(from_dir, to_dir, "modules"))
+		goto out_unlink_kallsyms;
+
+	scnprintf(kcore_filename, PATH_MAX, "%s/kcore", from_dir);
+	scnprintf(extract_filename, PATH_MAX, "%s/kcore", to_dir);
+
+	if (kcore__open(&kcore, kcore_filename))
+		goto out_unlink_modules;
+
+	if (kcore_copy__calc_maps(&kci, from_dir, kcore.elf))
+		goto out_kcore_close;
+
+	if (kcore__init(&extract, extract_filename, kcore.elfclass, false))
+		goto out_kcore_close;
+
+	if (!kci.modules_map.addr)
+		count -= 1;
+
+	if (kcore__copy_hdr(&kcore, &extract, count))
+		goto out_extract_close;
+
+	if (kcore__add_phdr(&extract, idx++, offset, kci.kernel_map.addr,
+			    kci.kernel_map.len))
+		goto out_extract_close;
+
+	if (kci.modules_map.addr) {
+		modules_offset = offset + kci.kernel_map.len;
+		if (kcore__add_phdr(&extract, idx, modules_offset,
+				    kci.modules_map.addr, kci.modules_map.len))
+			goto out_extract_close;
+	}
+
+	sz = kcore__write(&extract);
+	if (sz < 0 || sz > offset)
+		goto out_extract_close;
+
+	if (copy_bytes(kcore.fd, kci.kernel_map.offset, extract.fd, offset,
+		       kci.kernel_map.len))
+		goto out_extract_close;
+
+	if (modules_offset && copy_bytes(kcore.fd, kci.modules_map.offset,
+					 extract.fd, modules_offset,
+					 kci.modules_map.len))
+		goto out_extract_close;
+
+	if (kcore_copy__compare_file(from_dir, to_dir, "modules"))
+		goto out_extract_close;
+
+	if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms"))
+		goto out_extract_close;
+
+	err = 0;
+
+out_extract_close:
+	kcore__close(&extract);
+	if (err)
+		unlink(extract_filename);
+out_kcore_close:
+	kcore__close(&kcore);
+out_unlink_modules:
+	if (err)
+		kcore_copy__unlink(to_dir, "modules");
+out_unlink_kallsyms:
+	if (err)
+		kcore_copy__unlink(to_dir, "kallsyms");
+
+	return err;
+}
+
+int kcore_extract__create(struct kcore_extract *kce)
+{
+	struct kcore kcore;
+	struct kcore extract;
+	size_t count = 1;
+	int idx = 0, err = -1;
+	off_t offset = page_size, sz;
+
+	if (kcore__open(&kcore, kce->kcore_filename))
+		return -1;
+
+	strcpy(kce->extract_filename, PERF_KCORE_EXTRACT);
+	if (kcore__init(&extract, kce->extract_filename, kcore.elfclass, true))
+		goto out_kcore_close;
+
+	if (kcore__copy_hdr(&kcore, &extract, count))
+		goto out_extract_close;
+
+	if (kcore__add_phdr(&extract, idx, offset, kce->addr, kce->len))
+		goto out_extract_close;
+
+	sz = kcore__write(&extract);
+	if (sz < 0 || sz > offset)
+		goto out_extract_close;
+
+	if (copy_bytes(kcore.fd, kce->offs, extract.fd, offset, kce->len))
+		goto out_extract_close;
+
+	err = 0;
+
+out_extract_close:
+	kcore__close(&extract);
+	if (err)
+		unlink(kce->extract_filename);
+out_kcore_close:
+	kcore__close(&kcore);
+
+	return err;
+}
+
+void kcore_extract__delete(struct kcore_extract *kce)
+{
+	unlink(kce->extract_filename);
+}
+
 void symbol__elf_init(void)
 {
 	elf_version(EV_CURRENT);
diff --git a/tools/perf/util/symbol-minimal.c b/tools/perf/util/symbol-minimal.c
index 3a802c3..2d2dd05 100644
--- a/tools/perf/util/symbol-minimal.c
+++ b/tools/perf/util/symbol-minimal.c
@@ -308,6 +308,21 @@
 	return -1;
 }
 
+int kcore_extract__create(struct kcore_extract *kce __maybe_unused)
+{
+	return -1;
+}
+
+void kcore_extract__delete(struct kcore_extract *kce __maybe_unused)
+{
+}
+
+int kcore_copy(const char *from_dir __maybe_unused,
+	       const char *to_dir __maybe_unused)
+{
+	return -1;
+}
+
 void symbol__elf_init(void)
 {
 }
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 7eb0362..c0c3696 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -51,6 +51,7 @@
 	DSO_BINARY_TYPE__SYSTEM_PATH_DSO,
 	DSO_BINARY_TYPE__GUEST_KMODULE,
 	DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE,
+	DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
 	DSO_BINARY_TYPE__NOT_FOUND,
 };
 
@@ -159,10 +160,12 @@
 
 		if (choose_best_symbol(curr, next) == SYMBOL_A) {
 			rb_erase(&next->rb_node, symbols);
+			symbol__delete(next);
 			goto again;
 		} else {
 			nd = rb_next(&curr->rb_node);
 			rb_erase(&curr->rb_node, symbols);
+			symbol__delete(curr);
 		}
 	}
 }
@@ -499,6 +502,64 @@
 	return -1;
 }
 
+int modules__parse(const char *filename, void *arg,
+		   int (*process_module)(void *arg, const char *name,
+					 u64 start))
+{
+	char *line = NULL;
+	size_t n;
+	FILE *file;
+	int err = 0;
+
+	file = fopen(filename, "r");
+	if (file == NULL)
+		return -1;
+
+	while (1) {
+		char name[PATH_MAX];
+		u64 start;
+		char *sep;
+		ssize_t line_len;
+
+		line_len = getline(&line, &n, file);
+		if (line_len < 0) {
+			if (feof(file))
+				break;
+			err = -1;
+			goto out;
+		}
+
+		if (!line) {
+			err = -1;
+			goto out;
+		}
+
+		line[--line_len] = '\0'; /* \n */
+
+		sep = strrchr(line, 'x');
+		if (sep == NULL)
+			continue;
+
+		hex2u64(sep + 1, &start);
+
+		sep = strchr(line, ' ');
+		if (sep == NULL)
+			continue;
+
+		*sep = '\0';
+
+		scnprintf(name, sizeof(name), "[%s]", line);
+
+		err = process_module(arg, name, start);
+		if (err)
+			break;
+	}
+out:
+	free(line);
+	fclose(file);
+	return err;
+}
+
 struct process_kallsyms_args {
 	struct map *map;
 	struct dso *dso;
@@ -739,6 +800,219 @@
 	return restricted;
 }
 
+struct module_info {
+	struct rb_node rb_node;
+	char *name;
+	u64 start;
+};
+
+static void add_module(struct module_info *mi, struct rb_root *modules)
+{
+	struct rb_node **p = &modules->rb_node;
+	struct rb_node *parent = NULL;
+	struct module_info *m;
+
+	while (*p != NULL) {
+		parent = *p;
+		m = rb_entry(parent, struct module_info, rb_node);
+		if (strcmp(mi->name, m->name) < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+	rb_link_node(&mi->rb_node, parent, p);
+	rb_insert_color(&mi->rb_node, modules);
+}
+
+static void delete_modules(struct rb_root *modules)
+{
+	struct module_info *mi;
+	struct rb_node *next = rb_first(modules);
+
+	while (next) {
+		mi = rb_entry(next, struct module_info, rb_node);
+		next = rb_next(&mi->rb_node);
+		rb_erase(&mi->rb_node, modules);
+		free(mi->name);
+		free(mi);
+	}
+}
+
+static struct module_info *find_module(const char *name,
+				       struct rb_root *modules)
+{
+	struct rb_node *n = modules->rb_node;
+
+	while (n) {
+		struct module_info *m;
+		int cmp;
+
+		m = rb_entry(n, struct module_info, rb_node);
+		cmp = strcmp(name, m->name);
+		if (cmp < 0)
+			n = n->rb_left;
+		else if (cmp > 0)
+			n = n->rb_right;
+		else
+			return m;
+	}
+
+	return NULL;
+}
+
+static int __read_proc_modules(void *arg, const char *name, u64 start)
+{
+	struct rb_root *modules = arg;
+	struct module_info *mi;
+
+	mi = zalloc(sizeof(struct module_info));
+	if (!mi)
+		return -ENOMEM;
+
+	mi->name = strdup(name);
+	mi->start = start;
+
+	if (!mi->name) {
+		free(mi);
+		return -ENOMEM;
+	}
+
+	add_module(mi, modules);
+
+	return 0;
+}
+
+static int read_proc_modules(const char *filename, struct rb_root *modules)
+{
+	if (symbol__restricted_filename(filename, "/proc/modules"))
+		return -1;
+
+	if (modules__parse(filename, modules, __read_proc_modules)) {
+		delete_modules(modules);
+		return -1;
+	}
+
+	return 0;
+}
+
+int compare_proc_modules(const char *from, const char *to)
+{
+	struct rb_root from_modules = RB_ROOT;
+	struct rb_root to_modules = RB_ROOT;
+	struct rb_node *from_node, *to_node;
+	struct module_info *from_m, *to_m;
+	int ret = -1;
+
+	if (read_proc_modules(from, &from_modules))
+		return -1;
+
+	if (read_proc_modules(to, &to_modules))
+		goto out_delete_from;
+
+	from_node = rb_first(&from_modules);
+	to_node = rb_first(&to_modules);
+	while (from_node) {
+		if (!to_node)
+			break;
+
+		from_m = rb_entry(from_node, struct module_info, rb_node);
+		to_m = rb_entry(to_node, struct module_info, rb_node);
+
+		if (from_m->start != to_m->start ||
+		    strcmp(from_m->name, to_m->name))
+			break;
+
+		from_node = rb_next(from_node);
+		to_node = rb_next(to_node);
+	}
+
+	if (!from_node && !to_node)
+		ret = 0;
+
+	delete_modules(&to_modules);
+out_delete_from:
+	delete_modules(&from_modules);
+
+	return ret;
+}
+
+static int do_validate_kcore_modules(const char *filename, struct map *map,
+				  struct map_groups *kmaps)
+{
+	struct rb_root modules = RB_ROOT;
+	struct map *old_map;
+	int err;
+
+	err = read_proc_modules(filename, &modules);
+	if (err)
+		return err;
+
+	old_map = map_groups__first(kmaps, map->type);
+	while (old_map) {
+		struct map *next = map_groups__next(old_map);
+		struct module_info *mi;
+
+		if (old_map == map || old_map->start == map->start) {
+			/* The kernel map */
+			old_map = next;
+			continue;
+		}
+
+		/* Module must be in memory at the same address */
+		mi = find_module(old_map->dso->short_name, &modules);
+		if (!mi || mi->start != old_map->start) {
+			err = -EINVAL;
+			goto out;
+		}
+
+		old_map = next;
+	}
+out:
+	delete_modules(&modules);
+	return err;
+}
+
+/*
+ * If kallsyms is referenced by name then we look for filename in the same
+ * directory.
+ */
+static bool filename_from_kallsyms_filename(char *filename,
+					    const char *base_name,
+					    const char *kallsyms_filename)
+{
+	char *name;
+
+	strcpy(filename, kallsyms_filename);
+	name = strrchr(filename, '/');
+	if (!name)
+		return false;
+
+	name += 1;
+
+	if (!strcmp(name, "kallsyms")) {
+		strcpy(name, base_name);
+		return true;
+	}
+
+	return false;
+}
+
+static int validate_kcore_modules(const char *kallsyms_filename,
+				  struct map *map)
+{
+	struct map_groups *kmaps = map__kmap(map)->kmaps;
+	char modules_filename[PATH_MAX];
+
+	if (!filename_from_kallsyms_filename(modules_filename, "modules",
+					     kallsyms_filename))
+		return -EINVAL;
+
+	if (do_validate_kcore_modules(modules_filename, map, kmaps))
+		return -EINVAL;
+
+	return 0;
+}
+
 struct kcore_mapfn_data {
 	struct dso *dso;
 	enum map_type type;
@@ -762,28 +1036,6 @@
 	return 0;
 }
 
-/*
- * If kallsyms is referenced by name then we look for kcore in the same
- * directory.
- */
-static bool kcore_filename_from_kallsyms_filename(char *kcore_filename,
-						  const char *kallsyms_filename)
-{
-	char *name;
-
-	strcpy(kcore_filename, kallsyms_filename);
-	name = strrchr(kcore_filename, '/');
-	if (!name)
-		return false;
-
-	if (!strcmp(name, "/kallsyms")) {
-		strcpy(name, "/kcore");
-		return true;
-	}
-
-	return false;
-}
-
 static int dso__load_kcore(struct dso *dso, struct map *map,
 			   const char *kallsyms_filename)
 {
@@ -800,8 +1052,12 @@
 	if (map != machine->vmlinux_maps[map->type])
 		return -EINVAL;
 
-	if (!kcore_filename_from_kallsyms_filename(kcore_filename,
-						   kallsyms_filename))
+	if (!filename_from_kallsyms_filename(kcore_filename, "kcore",
+					     kallsyms_filename))
+		return -EINVAL;
+
+	/* All modules must be present at their original addresses */
+	if (validate_kcore_modules(kallsyms_filename, map))
 		return -EINVAL;
 
 	md.dso = dso;
@@ -1188,6 +1444,105 @@
 	return err;
 }
 
+static int find_matching_kcore(struct map *map, char *dir, size_t dir_sz)
+{
+	char kallsyms_filename[PATH_MAX];
+	struct dirent *dent;
+	int ret = -1;
+	DIR *d;
+
+	d = opendir(dir);
+	if (!d)
+		return -1;
+
+	while (1) {
+		dent = readdir(d);
+		if (!dent)
+			break;
+		if (dent->d_type != DT_DIR)
+			continue;
+		scnprintf(kallsyms_filename, sizeof(kallsyms_filename),
+			  "%s/%s/kallsyms", dir, dent->d_name);
+		if (!validate_kcore_modules(kallsyms_filename, map)) {
+			strlcpy(dir, kallsyms_filename, dir_sz);
+			ret = 0;
+			break;
+		}
+	}
+
+	closedir(d);
+
+	return ret;
+}
+
+static char *dso__find_kallsyms(struct dso *dso, struct map *map)
+{
+	u8 host_build_id[BUILD_ID_SIZE];
+	char sbuild_id[BUILD_ID_SIZE * 2 + 1];
+	bool is_host = false;
+	char path[PATH_MAX];
+
+	if (!dso->has_build_id) {
+		/*
+		 * Last resort, if we don't have a build-id and couldn't find
+		 * any vmlinux file, try the running kernel kallsyms table.
+		 */
+		goto proc_kallsyms;
+	}
+
+	if (sysfs__read_build_id("/sys/kernel/notes", host_build_id,
+				 sizeof(host_build_id)) == 0)
+		is_host = dso__build_id_equal(dso, host_build_id);
+
+	build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id);
+
+	/* Use /proc/kallsyms if possible */
+	if (is_host) {
+		DIR *d;
+		int fd;
+
+		/* If no cached kcore go with /proc/kallsyms */
+		scnprintf(path, sizeof(path), "%s/[kernel.kcore]/%s",
+			  buildid_dir, sbuild_id);
+		d = opendir(path);
+		if (!d)
+			goto proc_kallsyms;
+		closedir(d);
+
+		/*
+		 * Do not check the build-id cache, until we know we cannot use
+		 * /proc/kcore.
+		 */
+		fd = open("/proc/kcore", O_RDONLY);
+		if (fd != -1) {
+			close(fd);
+			/* If module maps match go with /proc/kallsyms */
+			if (!validate_kcore_modules("/proc/kallsyms", map))
+				goto proc_kallsyms;
+		}
+
+		/* Find kallsyms in build-id cache with kcore */
+		if (!find_matching_kcore(map, path, sizeof(path)))
+			return strdup(path);
+
+		goto proc_kallsyms;
+	}
+
+	scnprintf(path, sizeof(path), "%s/[kernel.kallsyms]/%s",
+		  buildid_dir, sbuild_id);
+
+	if (access(path, F_OK)) {
+		pr_err("No kallsyms or vmlinux with build-id %s was found\n",
+		       sbuild_id);
+		return NULL;
+	}
+
+	return strdup(path);
+
+proc_kallsyms:
+	return strdup("/proc/kallsyms");
+}
+
 static int dso__load_kernel_sym(struct dso *dso, struct map *map,
 				symbol_filter_t filter)
 {
@@ -1214,7 +1569,7 @@
 		goto do_kallsyms;
 	}
 
-	if (symbol_conf.vmlinux_name != NULL) {
+	if (!symbol_conf.ignore_vmlinux && symbol_conf.vmlinux_name != NULL) {
 		err = dso__load_vmlinux(dso, map,
 					symbol_conf.vmlinux_name, filter);
 		if (err > 0) {
@@ -1226,7 +1581,7 @@
 		return err;
 	}
 
-	if (vmlinux_path != NULL) {
+	if (!symbol_conf.ignore_vmlinux && vmlinux_path != NULL) {
 		err = dso__load_vmlinux_path(dso, map, filter);
 		if (err > 0)
 			return err;
@@ -1236,51 +1591,11 @@
 	if (symbol_conf.symfs[0] != 0)
 		return -1;
 
-	/*
-	 * Say the kernel DSO was created when processing the build-id header table,
-	 * we have a build-id, so check if it is the same as the running kernel,
-	 * using it if it is.
-	 */
-	if (dso->has_build_id) {
-		u8 kallsyms_build_id[BUILD_ID_SIZE];
-		char sbuild_id[BUILD_ID_SIZE * 2 + 1];
+	kallsyms_allocated_filename = dso__find_kallsyms(dso, map);
+	if (!kallsyms_allocated_filename)
+		return -1;
 
-		if (sysfs__read_build_id("/sys/kernel/notes", kallsyms_build_id,
-					 sizeof(kallsyms_build_id)) == 0) {
-			if (dso__build_id_equal(dso, kallsyms_build_id)) {
-				kallsyms_filename = "/proc/kallsyms";
-				goto do_kallsyms;
-			}
-		}
-		/*
-		 * Now look if we have it on the build-id cache in
-		 * $HOME/.debug/[kernel.kallsyms].
-		 */
-		build_id__sprintf(dso->build_id, sizeof(dso->build_id),
-				  sbuild_id);
-
-		if (asprintf(&kallsyms_allocated_filename,
-			     "%s/.debug/[kernel.kallsyms]/%s",
-			     getenv("HOME"), sbuild_id) == -1) {
-			pr_err("Not enough memory for kallsyms file lookup\n");
-			return -1;
-		}
-
-		kallsyms_filename = kallsyms_allocated_filename;
-
-		if (access(kallsyms_filename, F_OK)) {
-			pr_err("No kallsyms or vmlinux with build-id %s "
-			       "was found\n", sbuild_id);
-			free(kallsyms_allocated_filename);
-			return -1;
-		}
-	} else {
-		/*
-		 * Last resort, if we don't have a build-id and couldn't find
-		 * any vmlinux file, try the running kernel kallsyms table.
-		 */
-		kallsyms_filename = "/proc/kallsyms";
-	}
+	kallsyms_filename = kallsyms_allocated_filename;
 
 do_kallsyms:
 	err = dso__load_kallsyms(dso, kallsyms_filename, map, filter);
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index fd5b70e..07de8fe 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -13,7 +13,7 @@
 #include <libgen.h>
 #include "build-id.h"
 
-#ifdef LIBELF_SUPPORT
+#ifdef HAVE_LIBELF_SUPPORT
 #include <libelf.h>
 #include <gelf.h>
 #endif
@@ -21,7 +21,7 @@
 
 #include "dso.h"
 
-#ifdef HAVE_CPLUS_DEMANGLE
+#ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
 extern char *cplus_demangle(const char *, int);
 
 static inline char *bfd_demangle(void __maybe_unused *v, const char *c, int i)
@@ -46,7 +46,7 @@
  * libelf 0.8.x and earlier do not support ELF_C_READ_MMAP;
  * for newer versions we can use mmap to reduce memory usage:
  */
-#ifdef LIBELF_MMAP
+#ifdef HAVE_LIBELF_MMAP_SUPPORT
 # define PERF_ELF_C_READ_MMAP ELF_C_READ_MMAP
 #else
 # define PERF_ELF_C_READ_MMAP ELF_C_READ
@@ -85,6 +85,7 @@
 	unsigned short	priv_size;
 	unsigned short	nr_events;
 	bool		try_vmlinux_path,
+			ignore_vmlinux,
 			show_kernel_path,
 			use_modules,
 			sort_by_name,
@@ -178,7 +179,7 @@
 	int fd;
 	enum dso_binary_type type;
 
-#ifdef LIBELF_SUPPORT
+#ifdef HAVE_LIBELF_SUPPORT
 	Elf *elf;
 	GElf_Ehdr ehdr;
 
@@ -222,6 +223,9 @@
 int kallsyms__parse(const char *filename, void *arg,
 		    int (*process_symbol)(void *arg, const char *name,
 					  char type, u64 start));
+int modules__parse(const char *filename, void *arg,
+		   int (*process_module)(void *arg, const char *name,
+					 u64 start));
 int filename__read_debuglink(const char *filename, char *debuglink,
 			     size_t size);
 
@@ -252,4 +256,21 @@
 int file__read_maps(int fd, bool exe, mapfn_t mapfn, void *data,
 		    bool *is_64_bit);
 
+#define PERF_KCORE_EXTRACT "/tmp/perf-kcore-XXXXXX"
+
+struct kcore_extract {
+	char *kcore_filename;
+	u64 addr;
+	u64 offs;
+	u64 len;
+	char extract_filename[sizeof(PERF_KCORE_EXTRACT)];
+	int fd;
+};
+
+int kcore_extract__create(struct kcore_extract *kce);
+void kcore_extract__delete(struct kcore_extract *kce);
+
+int kcore_copy(const char *from_dir, const char *to_dir);
+int compare_proc_modules(const char *from, const char *to);
+
 #endif /* __PERF_SYMBOL */
diff --git a/tools/perf/util/sysfs.c b/tools/perf/util/sysfs.c
deleted file mode 100644
index f71e9ea..0000000
--- a/tools/perf/util/sysfs.c
+++ /dev/null
@@ -1,60 +0,0 @@
-
-#include "util.h"
-#include "sysfs.h"
-
-static const char * const sysfs_known_mountpoints[] = {
-	"/sys",
-	0,
-};
-
-static int sysfs_found;
-char sysfs_mountpoint[PATH_MAX + 1];
-
-static int sysfs_valid_mountpoint(const char *sysfs)
-{
-	struct statfs st_fs;
-
-	if (statfs(sysfs, &st_fs) < 0)
-		return -ENOENT;
-	else if (st_fs.f_type != (long) SYSFS_MAGIC)
-		return -ENOENT;
-
-	return 0;
-}
-
-const char *sysfs_find_mountpoint(void)
-{
-	const char * const *ptr;
-	char type[100];
-	FILE *fp;
-
-	if (sysfs_found)
-		return (const char *) sysfs_mountpoint;
-
-	ptr = sysfs_known_mountpoints;
-	while (*ptr) {
-		if (sysfs_valid_mountpoint(*ptr) == 0) {
-			sysfs_found = 1;
-			strcpy(sysfs_mountpoint, *ptr);
-			return sysfs_mountpoint;
-		}
-		ptr++;
-	}
-
-	/* give up and parse /proc/mounts */
-	fp = fopen("/proc/mounts", "r");
-	if (fp == NULL)
-		return NULL;
-
-	while (!sysfs_found &&
-	       fscanf(fp, "%*s %" STR(PATH_MAX) "s %99s %*s %*d %*d\n",
-		      sysfs_mountpoint, type) == 2) {
-
-		if (strcmp(type, "sysfs") == 0)
-			sysfs_found = 1;
-	}
-
-	fclose(fp);
-
-	return sysfs_found ? sysfs_mountpoint : NULL;
-}
diff --git a/tools/perf/util/sysfs.h b/tools/perf/util/sysfs.h
deleted file mode 100644
index a813b72..0000000
--- a/tools/perf/util/sysfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SYSFS_H__
-#define __SYSFS_H__
-
-const char *sysfs_find_mountpoint(void);
-
-#endif /* __DEBUGFS_H__ */
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index e3d4a55..cd8e2f5 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -6,86 +6,137 @@
 #include "thread.h"
 #include "util.h"
 #include "debug.h"
+#include "comm.h"
 
 struct thread *thread__new(pid_t pid, pid_t tid)
 {
-	struct thread *self = zalloc(sizeof(*self));
+	char *comm_str;
+	struct comm *comm;
+	struct thread *thread = zalloc(sizeof(*thread));
 
-	if (self != NULL) {
-		map_groups__init(&self->mg);
-		self->pid_ = pid;
-		self->tid = tid;
-		self->ppid = -1;
-		self->comm = malloc(32);
-		if (self->comm)
-			snprintf(self->comm, 32, ":%d", self->tid);
+	if (thread != NULL) {
+		map_groups__init(&thread->mg);
+		thread->pid_ = pid;
+		thread->tid = tid;
+		thread->ppid = -1;
+		INIT_LIST_HEAD(&thread->comm_list);
+
+		comm_str = malloc(32);
+		if (!comm_str)
+			goto err_thread;
+
+		snprintf(comm_str, 32, ":%d", tid);
+		comm = comm__new(comm_str, 0);
+		free(comm_str);
+		if (!comm)
+			goto err_thread;
+
+		list_add(&comm->list, &thread->comm_list);
 	}
 
-	return self;
+	return thread;
+
+err_thread:
+	free(thread);
+	return NULL;
 }
 
-void thread__delete(struct thread *self)
+void thread__delete(struct thread *thread)
 {
-	map_groups__exit(&self->mg);
-	free(self->comm);
-	free(self);
-}
+	struct comm *comm, *tmp;
 
-int thread__set_comm(struct thread *self, const char *comm)
-{
-	int err;
-
-	if (self->comm)
-		free(self->comm);
-	self->comm = strdup(comm);
-	err = self->comm == NULL ? -ENOMEM : 0;
-	if (!err) {
-		self->comm_set = true;
+	map_groups__exit(&thread->mg);
+	list_for_each_entry_safe(comm, tmp, &thread->comm_list, list) {
+		list_del(&comm->list);
+		comm__free(comm);
 	}
-	return err;
+
+	free(thread);
 }
 
-int thread__comm_len(struct thread *self)
+struct comm *thread__comm(const struct thread *thread)
 {
-	if (!self->comm_len) {
-		if (!self->comm)
+	if (list_empty(&thread->comm_list))
+		return NULL;
+
+	return list_first_entry(&thread->comm_list, struct comm, list);
+}
+
+/* CHECKME: time should always be 0 if event aren't ordered */
+int thread__set_comm(struct thread *thread, const char *str, u64 timestamp)
+{
+	struct comm *new, *curr = thread__comm(thread);
+
+	/* Override latest entry if it had no specific time coverage */
+	if (!curr->start) {
+		comm__override(curr, str, timestamp);
+		return 0;
+	}
+
+	new = comm__new(str, timestamp);
+	if (!new)
+		return -ENOMEM;
+
+	list_add(&new->list, &thread->comm_list);
+	thread->comm_set = true;
+
+	return 0;
+}
+
+const char *thread__comm_str(const struct thread *thread)
+{
+	const struct comm *comm = thread__comm(thread);
+
+	if (!comm)
+		return NULL;
+
+	return comm__str(comm);
+}
+
+/* CHECKME: it should probably better return the max comm len from its comm list */
+int thread__comm_len(struct thread *thread)
+{
+	if (!thread->comm_len) {
+		const char *comm = thread__comm_str(thread);
+		if (!comm)
 			return 0;
-		self->comm_len = strlen(self->comm);
+		thread->comm_len = strlen(comm);
 	}
 
-	return self->comm_len;
+	return thread->comm_len;
 }
 
 size_t thread__fprintf(struct thread *thread, FILE *fp)
 {
-	return fprintf(fp, "Thread %d %s\n", thread->tid, thread->comm) +
+	return fprintf(fp, "Thread %d %s\n", thread->tid, thread__comm_str(thread)) +
 	       map_groups__fprintf(&thread->mg, verbose, fp);
 }
 
-void thread__insert_map(struct thread *self, struct map *map)
+void thread__insert_map(struct thread *thread, struct map *map)
 {
-	map_groups__fixup_overlappings(&self->mg, map, verbose, stderr);
-	map_groups__insert(&self->mg, map);
+	map_groups__fixup_overlappings(&thread->mg, map, verbose, stderr);
+	map_groups__insert(&thread->mg, map);
 }
 
-int thread__fork(struct thread *self, struct thread *parent)
+int thread__fork(struct thread *thread, struct thread *parent, u64 timestamp)
 {
-	int i;
+	int i, err;
 
 	if (parent->comm_set) {
-		if (self->comm)
-			free(self->comm);
-		self->comm = strdup(parent->comm);
-		if (!self->comm)
+		const char *comm = thread__comm_str(parent);
+		if (!comm)
 			return -ENOMEM;
-		self->comm_set = true;
+		err = thread__set_comm(thread, comm, timestamp);
+		if (!err)
+			return err;
+		thread->comm_set = true;
 	}
 
 	for (i = 0; i < MAP__NR_TYPES; ++i)
-		if (map_groups__clone(&self->mg, &parent->mg, i) < 0)
+		if (map_groups__clone(&thread->mg, &parent->mg, i) < 0)
 			return -ENOMEM;
 
-	self->ppid = parent->tid;
+	thread->ppid = parent->tid;
 
 	return 0;
 }
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 4ebbb40..897c1b2 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -2,6 +2,7 @@
 #define __PERF_THREAD_H
 
 #include <linux/rbtree.h>
+#include <linux/list.h>
 #include <unistd.h>
 #include <sys/types.h>
 #include "symbol.h"
@@ -18,31 +19,34 @@
 	char			shortname[3];
 	bool			comm_set;
 	bool			dead; /* if set thread has exited */
-	char			*comm;
+	struct list_head	comm_list;
 	int			comm_len;
 
 	void			*priv;
 };
 
 struct machine;
+struct comm;
 
 struct thread *thread__new(pid_t pid, pid_t tid);
-void thread__delete(struct thread *self);
+void thread__delete(struct thread *thread);
 static inline void thread__exited(struct thread *thread)
 {
 	thread->dead = true;
 }
 
-int thread__set_comm(struct thread *self, const char *comm);
-int thread__comm_len(struct thread *self);
-void thread__insert_map(struct thread *self, struct map *map);
-int thread__fork(struct thread *self, struct thread *parent);
+int thread__set_comm(struct thread *thread, const char *comm, u64 timestamp);
+int thread__comm_len(struct thread *thread);
+struct comm *thread__comm(const struct thread *thread);
+const char *thread__comm_str(const struct thread *thread);
+void thread__insert_map(struct thread *thread, struct map *map);
+int thread__fork(struct thread *thread, struct thread *parent, u64 timestamp);
 size_t thread__fprintf(struct thread *thread, FILE *fp);
 
-static inline struct map *thread__find_map(struct thread *self,
+static inline struct map *thread__find_map(struct thread *thread,
 					   enum map_type type, u64 addr)
 {
-	return self ? map_groups__find(&self->mg, type, addr) : NULL;
+	return thread ? map_groups__find(&thread->mg, type, addr) : NULL;
 }
 
 void thread__find_addr_map(struct thread *thread, struct machine *machine,
diff --git a/tools/perf/util/top.h b/tools/perf/util/top.h
index b554ffc..88cfeaf 100644
--- a/tools/perf/util/top.h
+++ b/tools/perf/util/top.h
@@ -24,6 +24,7 @@
 	u64		   exact_samples;
 	u64		   guest_us_samples, guest_kernel_samples;
 	int		   print_entries, count_filter, delay_secs;
+	int		   max_stack;
 	bool		   hide_kernel_symbols, hide_user_symbols, zero;
 	bool		   use_tui, use_stdio;
 	bool		   kptr_restrict_warned;
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index e9e1c03..6681f71 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -120,42 +120,6 @@
 	return val;
 }
 
-void *raw_field_ptr(struct event_format *event, const char *name, void *data)
-{
-	struct format_field *field;
-
-	field = pevent_find_any_field(event, name);
-	if (!field)
-		return NULL;
-
-	if (field->flags & FIELD_IS_DYNAMIC) {
-		int offset;
-
-		offset = *(int *)(data + field->offset);
-		offset &= 0xffff;
-
-		return data + offset;
-	}
-
-	return data + field->offset;
-}
-
-int trace_parse_common_type(struct pevent *pevent, void *data)
-{
-	struct pevent_record record;
-
-	record.data = data;
-	return pevent_data_type(pevent, &record);
-}
-
-int trace_parse_common_pid(struct pevent *pevent, void *data)
-{
-	struct pevent_record record;
-
-	record.data = data;
-	return pevent_data_pid(pevent, &record);
-}
-
 unsigned long long read_size(struct event_format *event, void *ptr, int size)
 {
 	return pevent_read_number(event->pevent, ptr, size);
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
index fafe1a4..04df631 100644
--- a/tools/perf/util/trace-event.h
+++ b/tools/perf/util/trace-event.h
@@ -11,8 +11,6 @@
 struct perf_tool;
 struct thread;
 
-extern struct pevent *perf_pevent;
-
 int bigendian(void);
 
 struct pevent *read_trace_init(int file_bigendian, int host_bigendian);
@@ -23,26 +21,19 @@
 int parse_event_file(struct pevent *pevent,
 		     char *buf, unsigned long size, char *sys);
 
-struct pevent_record *trace_peek_data(struct pevent *pevent, int cpu);
-
 unsigned long long
 raw_field_value(struct event_format *event, const char *name, void *data);
-void *raw_field_ptr(struct event_format *event, const char *name, void *data);
 
 void parse_proc_kallsyms(struct pevent *pevent, char *file, unsigned int size);
 void parse_ftrace_printk(struct pevent *pevent, char *file, unsigned int size);
 
 ssize_t trace_report(int fd, struct pevent **pevent, bool repipe);
 
-int trace_parse_common_type(struct pevent *pevent, void *data);
-int trace_parse_common_pid(struct pevent *pevent, void *data);
-
 struct event_format *trace_find_next_event(struct pevent *pevent,
 					   struct event_format *event);
 unsigned long long read_size(struct event_format *event, void *ptr, int size);
 unsigned long long eval_flag(const char *flag);
 
-struct pevent_record *trace_read_data(struct pevent *pevent, int cpu);
 int read_tracing_data(int fd, struct list_head *pattrs);
 
 struct tracing_data {
diff --git a/tools/perf/util/unwind.h b/tools/perf/util/unwind.h
index cb6bc50..ec0c71a 100644
--- a/tools/perf/util/unwind.h
+++ b/tools/perf/util/unwind.h
@@ -13,7 +13,7 @@
 
 typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry, void *arg);
 
-#ifdef LIBUNWIND_SUPPORT
+#ifdef HAVE_LIBUNWIND_SUPPORT
 int unwind__get_entries(unwind_entry_cb_t cb, void *arg,
 			struct machine *machine,
 			struct thread *thread,
@@ -31,5 +31,5 @@
 {
 	return 0;
 }
-#endif /* LIBUNWIND_SUPPORT */
+#endif /* HAVE_LIBUNWIND_SUPPORT */
 #endif /* __UNWIND_H */
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index 6d17b18..28a0a89 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -1,7 +1,7 @@
 #include "../perf.h"
 #include "util.h"
 #include <sys/mman.h>
-#ifdef BACKTRACE_SUPPORT
+#ifdef HAVE_BACKTRACE_SUPPORT
 #include <execinfo.h>
 #endif
 #include <stdio.h>
@@ -55,17 +55,20 @@
 	return (stat(path, &st) && mkdir(path, mode)) ? -1 : 0;
 }
 
-static int slow_copyfile(const char *from, const char *to)
+static int slow_copyfile(const char *from, const char *to, mode_t mode)
 {
-	int err = 0;
+	int err = -1;
 	char *line = NULL;
 	size_t n;
 	FILE *from_fp = fopen(from, "r"), *to_fp;
+	mode_t old_umask;
 
 	if (from_fp == NULL)
 		goto out;
 
+	old_umask = umask(mode ^ 0777);
 	to_fp = fopen(to, "w");
+	umask(old_umask);
 	if (to_fp == NULL)
 		goto out_fclose_from;
 
@@ -82,7 +85,7 @@
 	return err;
 }
 
-int copyfile(const char *from, const char *to)
+int copyfile_mode(const char *from, const char *to, mode_t mode)
 {
 	int fromfd, tofd;
 	struct stat st;
@@ -93,13 +96,13 @@
 		goto out;
 
 	if (st.st_size == 0) /* /proc? do it slowly... */
-		return slow_copyfile(from, to);
+		return slow_copyfile(from, to, mode);
 
 	fromfd = open(from, O_RDONLY);
 	if (fromfd < 0)
 		goto out;
 
-	tofd = creat(to, 0755);
+	tofd = creat(to, mode);
 	if (tofd < 0)
 		goto out_close_from;
 
@@ -121,6 +124,11 @@
 	return err;
 }
 
+int copyfile(const char *from, const char *to)
+{
+	return copyfile_mode(from, to, 0755);
+}
+
 unsigned long convert_unit(unsigned long value, char *unit)
 {
 	*unit = ' ';
@@ -204,7 +212,7 @@
 }
 
 /* Obtain a backtrace and print it to stdout. */
-#ifdef BACKTRACE_SUPPORT
+#ifdef HAVE_BACKTRACE_SUPPORT
 void dump_stack(void)
 {
 	void *array[16];
@@ -361,3 +369,47 @@
 	*ptime = time_sec * NSEC_PER_SEC + time_nsec;
 	return 0;
 }
+
+unsigned long parse_tag_value(const char *str, struct parse_tag *tags)
+{
+	struct parse_tag *i = tags;
+
+	while (i->tag) {
+		char *s;
+
+		s = strchr(str, i->tag);
+		if (s) {
+			unsigned long int value;
+			char *endptr;
+
+			value = strtoul(str, &endptr, 10);
+			if (s != endptr)
+				break;
+
+			if (value > ULONG_MAX / i->mult)
+				break;
+			value *= i->mult;
+			return value;
+		}
+		i++;
+	}
+
+	return (unsigned long) -1;
+}
+
+int filename__read_int(const char *filename, int *value)
+{
+	char line[64];
+	int fd = open(filename, O_RDONLY), err = -1;
+
+	if (fd < 0)
+		return -1;
+
+	if (read(fd, line, sizeof(line)) > 0) {
+		*value = atoi(line);
+		err = 0;
+	}
+
+	close(fd);
+	return err;
+}
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index a535359..c8f362d 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -128,6 +128,8 @@
 #endif
 #endif
 
+#define PERF_GTK_DSO  "libperf-gtk.so"
+
 /* General helper functions */
 extern void usage(const char *err) NORETURN;
 extern void die(const char *err, ...) NORETURN __attribute__((format (printf, 1, 2)));
@@ -241,6 +243,7 @@
 
 int mkdir_p(char *path, mode_t mode);
 int copyfile(const char *from, const char *to);
+int copyfile_mode(const char *from, const char *to, mode_t mode);
 
 s64 perf_atoll(const char *str);
 char **argv_split(const char *str, int *argcp);
@@ -270,6 +273,13 @@
 	return (n != 0 && ((n & (n - 1)) == 0));
 }
 
+static inline unsigned next_pow2(unsigned x)
+{
+	if (!x)
+		return 1;
+	return 1ULL << (32 - __builtin_clz(x - 1));
+}
+
 size_t hex_width(u64 v);
 int hex2u64(const char *ptr, u64 *val);
 
@@ -281,4 +291,20 @@
 extern unsigned int page_size;
 
 void get_term_dimensions(struct winsize *ws);
+
+struct parse_tag {
+	char tag;
+	int mult;
+};
+
+unsigned long parse_tag_value(const char *str, struct parse_tag *tags);
+
+#define SRCLINE_UNKNOWN  ((char *) "??:0")
+
+struct dso;
+
+char *get_srcline(struct dso *dso, unsigned long addr);
+void free_srcline(char *srcline);
+
+int filename__read_int(const char *filename, int *value);
 #endif /* GIT_COMPAT_UTIL_H */
diff --git a/tools/scripts/Makefile.include b/tools/scripts/Makefile.include
index 0d0506d..ee76544 100644
--- a/tools/scripts/Makefile.include
+++ b/tools/scripts/Makefile.include
@@ -59,21 +59,22 @@
 QUIET_SUBDIR1  =
 
 ifneq ($(findstring $(MAKEFLAGS),s),s)
-ifneq ($(V),1)
-	QUIET_CC       = @echo '   ' CC $@;
-	QUIET_AR       = @echo '   ' AR $@;
-	QUIET_LINK     = @echo '   ' LINK $@;
-	QUIET_MKDIR    = @echo '   ' MKDIR $@;
-	QUIET_GEN      = @echo '   ' GEN $@;
+  ifneq ($(V),1)
+	QUIET_CC       = @echo '  CC       '$@;
+	QUIET_AR       = @echo '  AR       '$@;
+	QUIET_LINK     = @echo '  LINK     '$@;
+	QUIET_MKDIR    = @echo '  MKDIR    '$@;
+	QUIET_GEN      = @echo '  GEN      '$@;
 	QUIET_SUBDIR0  = +@subdir=
-	QUIET_SUBDIR1  = ;$(NO_SUBDIR) echo '   ' SUBDIR $$subdir; \
+	QUIET_SUBDIR1  = ;$(NO_SUBDIR) \
+			  echo '  SUBDIR   '$$subdir; \
 			 $(MAKE) $(PRINT_DIR) -C $$subdir
-	QUIET_FLEX     = @echo '   ' FLEX $@;
-	QUIET_BISON    = @echo '   ' BISON $@;
+	QUIET_FLEX     = @echo '  FLEX     '$@;
+	QUIET_BISON    = @echo '  BISON    '$@;
 
 	descend = \
-		+@echo '   ' DESCEND $(1); \
+		+@echo	       '  DESCEND  '$(1); \
 		mkdir -p $(OUTPUT)$(1) && \
 		$(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2)
-endif
+  endif
 endif