Fix misc Kconfig typos Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 57f23b4..e316bd9 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -133,7 +133,7 @@ into the kernel and we can use the standard read[bwl]/write[bwl] macros. This is the preferred method due to speed but it limits the system to just 64MB of PCI memory. This can be - problamatic if using video cards and other memory-heavy devices. + problematic if using video cards and other memory-heavy devices. 2) If > 64MB of memory space is required, the IXP4xx can be configured to use indirect registers to access PCI This allows
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig index 147b019..6f4c6a1 100644 --- a/arch/arm/mach-lh7a40x/Kconfig +++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -8,7 +8,7 @@ help Say Y here if you are using the Sharp KEV7A400 development board. This hardware is discontinued, so I'd be very - suprised if you wanted this option. + surprised if you wanted this option. config MACH_LPD7A400 bool "LPD7A400 Card Engine"
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 63965c7..9aa26b9 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig
@@ -91,7 +91,7 @@ config MACH_S3C2413 bool help - Internal node for S3C2413 verison of SMDK2413, so that + Internal node for S3C2413 version of SMDK2413, so that machine_is_s3c2413() will work when MACH_SMDK2413 is selected
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c0bfb82..b09a19f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig
@@ -197,7 +197,7 @@ select CPU_CP15_MPU help ARM940T is a member of the ARM9TDMI family of general- - purpose microprocessors with MPU and seperate 4KB + purpose microprocessors with MPU and separate 4KB instruction and 4KB data cases, each with a 4-word line length.
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index 44eb1b9..c7ea9ef 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ depends on ETRAX_ARCH_V10 default "95a6" help - Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a + Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a good choice for most Axis products... config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 734d5f3..e7e724bc 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ default "0" help This controls the initial value of the trickle charge register. - 0 = disabled (use this if you are unsure or have a non rechargable battery) + 0 = disabled (use this if you are unsure or have a non rechargeable battery) Otherwise the following values can be OR:ed together to control the charge current: 1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index a33097f..f64624f 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -88,7 +88,7 @@ help Enables the DMA7 input channel for ser0 (ttyS0). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -157,7 +157,7 @@ help Enables the DMA5 input channel for ser1 (ttyS1). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want this on, unless you use the DMA channel for something else. @@ -228,7 +228,7 @@ help Enables the DMA3 input channel for ser2 (ttyS2). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -297,7 +297,7 @@ help Enables the DMA9 input channel for ser3 (ttyS3). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else.
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 6d920d4..c1bc22c 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig
@@ -565,7 +565,7 @@ depends on ROM help This is almost always the same as the base of the ROM. Since on all - 68000 type varients the vectors are at the base of the boot device + 68000 type variants the vectors are at the base of the boot device on system startup. config ROMVECSIZE @@ -574,7 +574,7 @@ depends on ROM help Define the size of the vector region in ROM. For most 68000 - varients this would be 0x400 bytes in size. Set to 0 if you do + variants this would be 0x400 bytes in size. Set to 0 if you do not want a vector region at the start of the ROM. config ROMSTART
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 1443024..22bb540 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig
@@ -865,7 +865,7 @@ bool # -# Endianess selection. Suffiently obscure so many users don't know what to +# Endianess selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a # choice statement should be more obvious to the user. # @@ -874,7 +874,7 @@ help Some MIPS machines can be configured for either little or big endian byte order. These modes require different kernels and a different - Linux distribution. In general there is one prefered byteorder for a + Linux distribution. In general there is one preferred byteorder for a particular system but some systems are just as commonly used in the one or the other endianess.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0673dbe..116d7d3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig
@@ -425,7 +425,7 @@ default n help This option enables support for the Maple 970FX Evaluation Board. - For more informations, refer to <http://www.970eval.com> + For more information, refer to <http://www.970eval.com> config PPC_PASEMI depends on PPC_MULTIPLATFORM && PPC64
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 7edb6b4..edcd5b8 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -21,7 +21,7 @@ Be aware that PCI buses can only function when SYS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsiblilty. + responsibility. config MPC834x_ITX bool "Freescale MPC834x ITX" @@ -30,7 +30,7 @@ This option enables support for the MPC 834x ITX evaluation board. Be aware that PCI initialization is the bootloader's - responsiblilty. + responsibility. config MPC8360E_PB bool "Freescale MPC8360E PB"
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 077711e..ef018e2 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig
@@ -724,7 +724,7 @@ Be aware that PCI buses can only function when SYS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsiblilty. + responsibility. config EV64360 bool "Marvell-EV64360BP"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6a461d4..bffc7e1 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig
@@ -217,7 +217,7 @@ bool "SHMIN" select CPU_SUBTYPE_SH7706 help - Select SHMIN if configureing for the SHMIN board + Select SHMIN if configuring for the SHMIN board. config SH_UNKNOWN bool "BareCPU"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 2f96610..92a7c8a 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig
@@ -212,8 +212,8 @@ tristate "Sun4m LED driver" help This driver toggles the front-panel LED on sun4m systems - in a user-specifyable manner. It's state can be probed - by reading /proc/led and it's blinking mode can be changed + in a user-specifiable manner. Its state can be probed + by reading /proc/led and its blinking mode can be changed via writes to /proc/led source "fs/Kconfig.binfmt"