blob: 45f3c1268e867261db8800b3e7130f761d6de182 [file] [log] [blame]
IP dynamic address hack-port v0.03
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This stuff allows diald ONESHOT connections to get established by
dynamically changing packet source address (and socket's if local procs).
It is implemented for TCP diald-box connections(1) and IP_MASQuerading(2).
If enabled[*] and forwarding interface has changed:
1) Socket (and packet) source address is rewritten ON RETRANSMISSIONS
while in SYN_SENT state (diald-box processes).
2) Out-bounded MASQueraded source address changes ON OUTPUT (when
internal host does retransmission) until a packet from outside is
received by the tunnel.
This is specially helpful for auto dialup links (diald), where the
``actual'' outgoing address is unknown at the moment the link is
going up. So, the *same* (local AND masqueraded) connections requests that
bring the link up will be able to get established.
[*] At boot, by default no address rewriting is attempted.
To enable:
# echo 1 > /proc/sys/net/ipv4/ip_dynaddr
To enable verbose mode:
# echo 2 > /proc/sys/net/ipv4/ip_dynaddr
To disable (default)
# echo 0 > /proc/sys/net/ipv4/ip_dynaddr
Enjoy!
-- Juanjo <jjciarla@raiz.uncu.edu.ar>