blob: be65e65e216ebe33763dbc8deb9e36f4536cb31b [file] [log] [blame]
/*******************************************************************************
*
* Module Name: rsxface - Public interfaces to the resource manager
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2017, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define EXPORT_ACPI_INTERFACES
#include <acpi/acpi.h>
#include "accommon.h"
#include "acresrc.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rsxface")
/* Local macros for 16,32-bit to 64-bit conversion */
#define ACPI_COPY_FIELD(out, in, field) ((out)->field = (in)->field)
#define ACPI_COPY_ADDRESS(out, in) \
ACPI_COPY_FIELD(out, in, resource_type); \
ACPI_COPY_FIELD(out, in, producer_consumer); \
ACPI_COPY_FIELD(out, in, decode); \
ACPI_COPY_FIELD(out, in, min_address_fixed); \
ACPI_COPY_FIELD(out, in, max_address_fixed); \
ACPI_COPY_FIELD(out, in, info); \
ACPI_COPY_FIELD(out, in, address.granularity); \
ACPI_COPY_FIELD(out, in, address.minimum); \
ACPI_COPY_FIELD(out, in, address.maximum); \
ACPI_COPY_FIELD(out, in, address.translation_offset); \
ACPI_COPY_FIELD(out, in, address.address_length); \
ACPI_COPY_FIELD(out, in, resource_source);
/* Local prototypes */
static acpi_status
acpi_rs_match_vendor_resource(struct acpi_resource *resource, void *context);
static acpi_status
acpi_rs_validate_parameters(acpi_handle device_handle,
struct acpi_buffer *buffer,
struct acpi_namespace_node **return_node);
/*******************************************************************************
*
* FUNCTION: acpi_rs_validate_parameters
*
* PARAMETERS: device_handle - Handle to a device
* buffer - Pointer to a data buffer
* return_node - Pointer to where the device node is returned
*
* RETURN: Status
*
* DESCRIPTION: Common parameter validation for resource interfaces
*
******************************************************************************/
static acpi_status
acpi_rs_validate_parameters(acpi_handle device_handle,
struct acpi_buffer *buffer,
struct acpi_namespace_node **return_node)
{
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(rs_validate_parameters);
/*
* Must have a valid handle to an ACPI device
*/
if (!device_handle) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
node = acpi_ns_validate_handle(device_handle);
if (!node) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (node->type != ACPI_TYPE_DEVICE) {
return_ACPI_STATUS(AE_TYPE);
}
/*
* Validate the user buffer object
*
* if there is a non-zero buffer length we also need a valid pointer in
* the buffer. If it's a zero buffer length, we'll be returning the
* needed buffer size (later), so keep going.
*/
status = acpi_ut_validate_buffer(buffer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
*return_node = node;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_get_irq_routing_table
*
* PARAMETERS: device_handle - Handle to the Bus device we are querying
* ret_buffer - Pointer to a buffer to receive the
* current resources for the device
*
* RETURN: Status
*
* DESCRIPTION: This function is called to get the IRQ routing table for a
* specific bus. The caller must first acquire a handle for the
* desired bus. The routine table is placed in the buffer pointed
* to by the ret_buffer variable parameter.
*
* If the function fails an appropriate status will be returned
* and the value of ret_buffer is undefined.
*
* This function attempts to execute the _PRT method contained in
* the object indicated by the passed device_handle.
*
******************************************************************************/
acpi_status
acpi_get_irq_routing_table(acpi_handle device_handle,
struct acpi_buffer *ret_buffer)
{
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_get_irq_routing_table);
/* Validate parameters then dispatch to internal routine */
status = acpi_rs_validate_parameters(device_handle, ret_buffer, &node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_rs_get_prt_method_data(node, ret_buffer);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_irq_routing_table)
/*******************************************************************************
*
* FUNCTION: acpi_get_current_resources
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are querying
* ret_buffer - Pointer to a buffer to receive the
* current resources for the device
*
* RETURN: Status
*
* DESCRIPTION: This function is called to get the current resources for a
* specific device. The caller must first acquire a handle for
* the desired device. The resource data is placed in the buffer
* pointed to by the ret_buffer variable parameter.
*
* If the function fails an appropriate status will be returned
* and the value of ret_buffer is undefined.
*
* This function attempts to execute the _CRS method contained in
* the object indicated by the passed device_handle.
*
******************************************************************************/
acpi_status
acpi_get_current_resources(acpi_handle device_handle,
struct acpi_buffer *ret_buffer)
{
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_get_current_resources);
/* Validate parameters then dispatch to internal routine */
status = acpi_rs_validate_parameters(device_handle, ret_buffer, &node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_rs_get_crs_method_data(node, ret_buffer);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_current_resources)
/*******************************************************************************
*
* FUNCTION: acpi_get_possible_resources
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are querying
* ret_buffer - Pointer to a buffer to receive the
* resources for the device
*
* RETURN: Status
*
* DESCRIPTION: This function is called to get a list of the possible resources
* for a specific device. The caller must first acquire a handle
* for the desired device. The resource data is placed in the
* buffer pointed to by the ret_buffer variable.
*
* If the function fails an appropriate status will be returned
* and the value of ret_buffer is undefined.
*
******************************************************************************/
acpi_status
acpi_get_possible_resources(acpi_handle device_handle,
struct acpi_buffer *ret_buffer)
{
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_get_possible_resources);
/* Validate parameters then dispatch to internal routine */
status = acpi_rs_validate_parameters(device_handle, ret_buffer, &node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_rs_get_prs_method_data(node, ret_buffer);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_possible_resources)
/*******************************************************************************
*
* FUNCTION: acpi_set_current_resources
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are setting resources
* in_buffer - Pointer to a buffer containing the
* resources to be set for the device
*
* RETURN: Status
*
* DESCRIPTION: This function is called to set the current resources for a
* specific device. The caller must first acquire a handle for
* the desired device. The resource data is passed to the routine
* the buffer pointed to by the in_buffer variable.
*
******************************************************************************/
acpi_status
acpi_set_current_resources(acpi_handle device_handle,
struct acpi_buffer *in_buffer)
{
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_set_current_resources);
/* Validate the buffer, don't allow zero length */
if ((!in_buffer) || (!in_buffer->pointer) || (!in_buffer->length)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Validate parameters then dispatch to internal routine */
status = acpi_rs_validate_parameters(device_handle, in_buffer, &node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_rs_set_srs_method_data(node, in_buffer);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_set_current_resources)
/*******************************************************************************
*
* FUNCTION: acpi_get_event_resources
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are getting resources
* in_buffer - Pointer to a buffer containing the
* resources to be set for the device
*
* RETURN: Status
*
* DESCRIPTION: This function is called to get the event resources for a
* specific device. The caller must first acquire a handle for
* the desired device. The resource data is passed to the routine
* the buffer pointed to by the in_buffer variable. Uses the
* _AEI method.
*
******************************************************************************/
acpi_status
acpi_get_event_resources(acpi_handle device_handle,
struct acpi_buffer *ret_buffer)
{
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_get_event_resources);
/* Validate parameters then dispatch to internal routine */
status = acpi_rs_validate_parameters(device_handle, ret_buffer, &node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_rs_get_aei_method_data(node, ret_buffer);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_event_resources)
/******************************************************************************
*
* FUNCTION: acpi_resource_to_address64
*
* PARAMETERS: resource - Pointer to a resource
* out - Pointer to the users's return buffer
* (a struct acpi_resource_address64)
*
* RETURN: Status
*
* DESCRIPTION: If the resource is an address16, address32, or address64,
* copy it to the address64 return buffer. This saves the
* caller from having to duplicate code for different-sized
* addresses.
*
******************************************************************************/
acpi_status
acpi_resource_to_address64(struct acpi_resource *resource,
struct acpi_resource_address64 *out)
{
struct acpi_resource_address16 *address16;
struct acpi_resource_address32 *address32;
if (!resource || !out) {
return (AE_BAD_PARAMETER);
}
/* Convert 16 or 32 address descriptor to 64 */
switch (resource->type) {
case ACPI_RESOURCE_TYPE_ADDRESS16:
address16 =
ACPI_CAST_PTR(struct acpi_resource_address16,
&resource->data);
ACPI_COPY_ADDRESS(out, address16);
break;
case ACPI_RESOURCE_TYPE_ADDRESS32:
address32 =
ACPI_CAST_PTR(struct acpi_resource_address32,
&resource->data);
ACPI_COPY_ADDRESS(out, address32);
break;
case ACPI_RESOURCE_TYPE_ADDRESS64:
/* Simple copy for 64 bit source */
memcpy(out, &resource->data,
sizeof(struct acpi_resource_address64));
break;
default:
return (AE_BAD_PARAMETER);
}
return (AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_resource_to_address64)
/*******************************************************************************
*
* FUNCTION: acpi_get_vendor_resource
*
* PARAMETERS: device_handle - Handle for the parent device object
* name - Method name for the parent resource
* (METHOD_NAME__CRS or METHOD_NAME__PRS)
* uuid - Pointer to the UUID to be matched.
* includes both subtype and 16-byte UUID
* ret_buffer - Where the vendor resource is returned
*
* RETURN: Status
*
* DESCRIPTION: Walk a resource template for the specified device to find a
* vendor-defined resource that matches the supplied UUID and
* UUID subtype. Returns a struct acpi_resource of type Vendor.
*
******************************************************************************/
acpi_status
acpi_get_vendor_resource(acpi_handle device_handle,
char *name,
struct acpi_vendor_uuid *uuid,
struct acpi_buffer *ret_buffer)
{
struct acpi_vendor_walk_info info;
acpi_status status;
/* Other parameters are validated by acpi_walk_resources */
if (!uuid || !ret_buffer) {
return (AE_BAD_PARAMETER);
}
info.uuid = uuid;
info.buffer = ret_buffer;
info.status = AE_NOT_EXIST;
/* Walk the _CRS or _PRS resource list for this device */
status =
acpi_walk_resources(device_handle, name,
acpi_rs_match_vendor_resource, &info);
if (ACPI_FAILURE(status)) {
return (status);
}
return (info.status);
}
ACPI_EXPORT_SYMBOL(acpi_get_vendor_resource)
/*******************************************************************************
*
* FUNCTION: acpi_rs_match_vendor_resource
*
* PARAMETERS: acpi_walk_resource_callback
*
* RETURN: Status
*
* DESCRIPTION: Match a vendor resource via the ACPI 3.0 UUID
*
******************************************************************************/
static acpi_status
acpi_rs_match_vendor_resource(struct acpi_resource *resource, void *context)
{
struct acpi_vendor_walk_info *info = context;
struct acpi_resource_vendor_typed *vendor;
struct acpi_buffer *buffer;
acpi_status status;
/* Ignore all descriptors except Vendor */
if (resource->type != ACPI_RESOURCE_TYPE_VENDOR) {
return (AE_OK);
}
vendor = &resource->data.vendor_typed;
/*
* For a valid match, these conditions must hold:
*
* 1) Length of descriptor data must be at least as long as a UUID struct
* 2) The UUID subtypes must match
* 3) The UUID data must match
*/
if ((vendor->byte_length < (ACPI_UUID_LENGTH + 1)) ||
(vendor->uuid_subtype != info->uuid->subtype) ||
(memcmp(vendor->uuid, info->uuid->data, ACPI_UUID_LENGTH))) {
return (AE_OK);
}
/* Validate/Allocate/Clear caller buffer */
buffer = info->buffer;
status = acpi_ut_initialize_buffer(buffer, resource->length);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Found the correct resource, copy and return it */
memcpy(buffer->pointer, resource, resource->length);
buffer->length = resource->length;
/* Found the desired descriptor, terminate resource walk */
info->status = AE_OK;
return (AE_CTRL_TERMINATE);
}
/*******************************************************************************
*
* FUNCTION: acpi_walk_resource_buffer
*
* PARAMETERS: buffer - Formatted buffer returned by one of the
* various Get*Resource functions
* user_function - Called for each resource
* context - Passed to user_function
*
* RETURN: Status
*
* DESCRIPTION: Walks the input resource template. The user_function is called
* once for each resource in the list.
*
******************************************************************************/
acpi_status
acpi_walk_resource_buffer(struct acpi_buffer *buffer,
acpi_walk_resource_callback user_function,
void *context)
{
acpi_status status = AE_OK;
struct acpi_resource *resource;
struct acpi_resource *resource_end;
ACPI_FUNCTION_TRACE(acpi_walk_resource_buffer);
/* Parameter validation */
if (!buffer || !buffer->pointer || !user_function) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Buffer contains the resource list and length */
resource = ACPI_CAST_PTR(struct acpi_resource, buffer->pointer);
resource_end =
ACPI_ADD_PTR(struct acpi_resource, buffer->pointer, buffer->length);
/* Walk the resource list until the end_tag is found (or buffer end) */
while (resource < resource_end) {
/* Sanity check the resource type */
if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
status = AE_AML_INVALID_RESOURCE_TYPE;
break;
}
/* Sanity check the length. It must not be zero, or we loop forever */
if (!resource->length) {
return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
}
/* Invoke the user function, abort on any error returned */
status = user_function(resource, context);
if (ACPI_FAILURE(status)) {
if (status == AE_CTRL_TERMINATE) {
/* This is an OK termination by the user function */
status = AE_OK;
}
break;
}
/* end_tag indicates end-of-list */
if (resource->type == ACPI_RESOURCE_TYPE_END_TAG) {
break;
}
/* Get the next resource descriptor */
resource = ACPI_NEXT_RESOURCE(resource);
}
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_walk_resource_buffer)
/*******************************************************************************
*
* FUNCTION: acpi_walk_resources
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are querying
* name - Method name of the resources we want.
* (METHOD_NAME__CRS, METHOD_NAME__PRS, or
* METHOD_NAME__AEI or METHOD_NAME__DMA)
* user_function - Called for each resource
* context - Passed to user_function
*
* RETURN: Status
*
* DESCRIPTION: Retrieves the current or possible resource list for the
* specified device. The user_function is called once for
* each resource in the list.
*
******************************************************************************/
acpi_status
acpi_walk_resources(acpi_handle device_handle,
char *name,
acpi_walk_resource_callback user_function, void *context)
{
acpi_status status;
struct acpi_buffer buffer;
ACPI_FUNCTION_TRACE(acpi_walk_resources);
/* Parameter validation */
if (!device_handle || !user_function || !name ||
(!ACPI_COMPARE_NAME(name, METHOD_NAME__CRS) &&
!ACPI_COMPARE_NAME(name, METHOD_NAME__PRS) &&
!ACPI_COMPARE_NAME(name, METHOD_NAME__AEI) &&
!ACPI_COMPARE_NAME(name, METHOD_NAME__DMA))) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Get the _CRS/_PRS/_AEI/_DMA resource list */
buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
status = acpi_rs_get_method_data(device_handle, name, &buffer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Walk the resource list and cleanup */
status = acpi_walk_resource_buffer(&buffer, user_function, context);
ACPI_FREE(buffer.pointer);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_walk_resources)