tg3: Fix read DMA FIFO overruns on recent devices
Earlier versions of tg3 devices had a problem where the read DMA FIFO
could be overrun in certain edge conditions. The fix was to limit the
number of rx BDs the hardware would fetch at a time. For later devices
(5761, 5784 and later ASIC revs), there is a hardware fix that must be
enabled to fix the same problem. This patch adds that hardware fix.
There is a gap in the ASIC revision lineage where neither fix is
applied. This is intentional as these ASIC revisions are not afflicted
by the bug.
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 9f6ffff..c3a430c 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -8015,6 +8015,16 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+ (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+ val = tr32(TG3_RDMA_RSRVCTRL_REG);
+ tw32(TG3_RDMA_RSRVCTRL_REG,
+ val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX);
+ }
+
/* Receive/send statistics. */
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
val = tr32(RCVLPC_STATS_ENABLE);
