qlge: Reduce debug print output.
Get rid of some noise that is for debug only.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index d1d8f05..b4c6fd7 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -58,8 +58,8 @@
NETIF_MSG_IFUP |
NETIF_MSG_RX_ERR |
NETIF_MSG_TX_ERR |
- NETIF_MSG_TX_QUEUED |
- NETIF_MSG_INTR | NETIF_MSG_TX_DONE | NETIF_MSG_RX_STATUS |
+/* NETIF_MSG_TX_QUEUED | */
+/* NETIF_MSG_INTR | NETIF_MSG_TX_DONE | NETIF_MSG_RX_STATUS | */
/* NETIF_MSG_PKTDATA | */
NETIF_MSG_HW | NETIF_MSG_WOL | 0;
@@ -327,7 +327,7 @@
(addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
(addr[5]);
- QPRINTK(qdev, IFUP, INFO,
+ QPRINTK(qdev, IFUP, DEBUG,
"Adding %s address %pM"
" at index %d in the CAM.\n",
((type ==
@@ -2552,7 +2552,7 @@
QPRINTK(qdev, IFUP, DEBUG, "Invalid rx_ring->type = %d.\n",
rx_ring->type);
}
- QPRINTK(qdev, IFUP, INFO, "Initializing rx work queue.\n");
+ QPRINTK(qdev, IFUP, DEBUG, "Initializing rx work queue.\n");
err = ql_write_cfg(qdev, cqicb, sizeof(struct cqicb),
CFG_LCQ, rx_ring->cq_id);
if (err) {
@@ -2605,7 +2605,7 @@
QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
return err;
}
- QPRINTK(qdev, IFUP, INFO, "Successfully loaded WQICB.\n");
+ QPRINTK(qdev, IFUP, DEBUG, "Successfully loaded WQICB.\n");
return err;
}
@@ -2647,7 +2647,7 @@
(qdev->pdev, qdev->msi_x_entry, qdev->rx_ring_count)) {
set_bit(QL_MSIX_ENABLED, &qdev->flags);
qdev->intr_count = qdev->rx_ring_count;
- QPRINTK(qdev, IFUP, INFO,
+ QPRINTK(qdev, IFUP, DEBUG,
"MSI-X Enabled, got %d vectors.\n",
qdev->intr_count);
return;
@@ -2774,11 +2774,11 @@
if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
free_irq(qdev->msi_x_entry[i].vector,
&qdev->rx_ring[i]);
- QPRINTK(qdev, IFDOWN, ERR,
+ QPRINTK(qdev, IFDOWN, DEBUG,
"freeing msix interrupt %d.\n", i);
} else {
free_irq(qdev->pdev->irq, &qdev->rx_ring[0]);
- QPRINTK(qdev, IFDOWN, ERR,
+ QPRINTK(qdev, IFDOWN, DEBUG,
"freeing msi interrupt %d.\n", i);
}
}
@@ -2809,7 +2809,7 @@
i);
goto err_irq;
} else {
- QPRINTK(qdev, IFUP, INFO,
+ QPRINTK(qdev, IFUP, DEBUG,
"Hooked intr %d, queue type %s%s%s, with name %s.\n",
i,
qdev->rx_ring[i].type ==
@@ -2884,14 +2884,14 @@
get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40);
get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16);
- QPRINTK(qdev, IFUP, INFO, "Initializing RSS.\n");
+ QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
return status;
}
- QPRINTK(qdev, IFUP, INFO, "Successfully loaded RICB.\n");
+ QPRINTK(qdev, IFUP, DEBUG, "Successfully loaded RICB.\n");
return status;
}
@@ -3053,7 +3053,7 @@
/* Start NAPI for the RSS queues. */
for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++) {
- QPRINTK(qdev, IFUP, INFO, "Enabling NAPI for rx_ring[%d].\n",
+ QPRINTK(qdev, IFUP, DEBUG, "Enabling NAPI for rx_ring[%d].\n",
i);
napi_enable(&qdev->rx_ring[i].napi);
}
