Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"There's one interseting commit - "libata, freezer: avoid block device
removal while system is frozen". It's an ugly hack working around a
deadlock condition between driver core resume and block layer device
removal paths through freezer which was made more reproducible by
writeback being converted to workqueue some releases ago. The bug has
nothing to do with libata but it's just an workaround which is easy to
backport. After discussion, Rafael and I seem to agree that we don't
really need kernel freezables - both kthread and workqueue. There are
few specific workqueues which constitute PM operations and require
freezing, which will be converted to use workqueue_set_max_active()
instead. All other kernel freezer uses are planned to be removed,
followed by the removal of kthread and workqueue freezer support,
hopefully.
Others are device-specific fixes. The most notable is the addition of
NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro
M500 SSDs which otherwise suffers data corruption"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata, freezer: avoid block device removal while system is frozen
libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs
libata: disable a disk via libata.force params
ahci: bail out on ICH6 before using AHCI BAR
ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN
libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 50680a5..b9e9bd8 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1529,6 +1529,8 @@
* atapi_dmadir: Enable ATAPI DMADIR bridge support
+ * disable: Disable this device.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 14f1e95..c0ed4f27 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1238,15 +1238,6 @@
if (rc)
return rc;
- /* AHCI controllers often implement SFF compatible interface.
- * Grab all PCI BARs just in case.
- */
- rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
- if (rc == -EBUSY)
- pcim_pin_device(pdev);
- if (rc)
- return rc;
-
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == 0x2652 || pdev->device == 0x2653)) {
u8 map;
@@ -1263,6 +1254,15 @@
}
}
+ /* AHCI controllers often implement SFF compatible interface.
+ * Grab all PCI BARs just in case.
+ */
+ rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index ae2d73f..3e23e99 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -113,7 +113,7 @@
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
- * is 0x07fffffd, and the other one write for setting
+ * is 0x07ffffff, and the other one write for setting
* the mpll_clk_en.
*/
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -124,6 +124,7 @@
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
| IMX6Q_GPR13_SATA_TX_BOOST_MASK
| IMX6Q_GPR13_SATA_TX_LVL_MASK
+ | IMX6Q_GPR13_SATA_MPLL_CLK_EN
| IMX6Q_GPR13_SATA_TX_EDGE_RATE
, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 75b9367..1393a58 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2149,9 +2149,16 @@
"failed to get NCQ Send/Recv Log Emask 0x%x\n",
err_mask);
} else {
+ u8 *cmds = dev->ncq_send_recv_cmds;
+
dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
- memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
- ATA_LOG_NCQ_SEND_RECV_SIZE);
+ memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
+
+ if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
+ ata_dev_dbg(dev, "disabling queued TRIM support\n");
+ cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
+ ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
+ }
}
}
@@ -4156,6 +4163,9 @@
{ "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
+ /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+ { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
@@ -4202,6 +4212,10 @@
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
+ /* devices that don't properly handle queued TRIM commands */
+ { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Crucial_CT???M500SSD1", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+
/* End Marker */
{ }
};
@@ -6519,6 +6533,7 @@
{ "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
{ "rstonce", .lflags = ATA_LFLAG_RST_ONCE },
{ "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR },
+ { "disable", .horkage_on = ATA_HORKAGE_DISABLE },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index ab58556..377eb88 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3872,6 +3872,27 @@
return;
}
+ /*
+ * XXX - UGLY HACK
+ *
+ * The block layer suspend/resume path is fundamentally broken due
+ * to freezable kthreads and workqueue and may deadlock if a block
+ * device gets removed while resume is in progress. I don't know
+ * what the solution is short of removing freezable kthreads and
+ * workqueues altogether.
+ *
+ * The following is an ugly hack to avoid kicking off device
+ * removal while freezer is active. This is a joke but does avoid
+ * this particular deadlock scenario.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=62801
+ * http://marc.info/?l=linux-kernel&m=138695698516487
+ */
+#ifdef CONFIG_FREEZER
+ while (pm_freezing)
+ msleep(10);
+#endif
+
DPRINTK("ENTER\n");
mutex_lock(&ap->scsi_scan_mutex);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0e23c26..9b50337 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -418,6 +418,7 @@
ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */
ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */
ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */
+ ATA_HORKAGE_NO_NCQ_TRIM = (1 << 19), /* don't use queued TRIM */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
diff --git a/kernel/freezer.c b/kernel/freezer.c
index b462fa1..aa6a8aa 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -19,6 +19,12 @@
bool pm_freezing;
bool pm_nosig_freezing;
+/*
+ * Temporary export for the deadlock workaround in ata_scsi_hotplug().
+ * Remove once the hack becomes unnecessary.
+ */
+EXPORT_SYMBOL_GPL(pm_freezing);
+
/* protects freezing and frozen transitions */
static DEFINE_SPINLOCK(freezer_lock);
