clk: qcom: Add EBI2 clocks for IPQ806x
The NAND controller within EBI2 requires EBI2_CLK and
EBI2_ALWAYS_ON_CLK clocks. Create structs for these clocks so
that they can be used by the NAND controller driver. Add an entry
for EBI2_AON_CLK in the gcc-ipq806x DT binding document.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index ee73cc7..a50936a 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -2172,6 +2172,36 @@
},
};
+static struct clk_branch ebi2_clk = {
+ .hwcg_reg = 0x3b00,
+ .hwcg_bit = 6,
+ .halt_reg = 0x2fcc,
+ .halt_bit = 1,
+ .clkr = {
+ .enable_reg = 0x3b00,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "ebi2_clk",
+ .ops = &clk_branch_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ },
+};
+
+static struct clk_branch ebi2_aon_clk = {
+ .halt_reg = 0x2fcc,
+ .halt_bit = 0,
+ .clkr = {
+ .enable_reg = 0x3b00,
+ .enable_mask = BIT(8),
+ .hw.init = &(struct clk_init_data){
+ .name = "ebi2_always_on_clk",
+ .ops = &clk_branch_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ },
+};
+
static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
@@ -2275,6 +2305,8 @@
[USB_FS1_XCVR_SRC] = &usb_fs1_xcvr_clk_src.clkr,
[USB_FS1_XCVR_CLK] = &usb_fs1_xcvr_clk.clkr,
[USB_FS1_SYSTEM_CLK] = &usb_fs1_sys_clk.clkr,
+ [EBI2_CLK] = &ebi2_clk.clkr,
+ [EBI2_AON_CLK] = &ebi2_aon_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
index 04fb29a..ebd63fd 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -288,5 +288,6 @@
#define UBI32_CORE2_CLK_SRC 278
#define UBI32_CORE1_CLK 279
#define UBI32_CORE2_CLK 280
+#define EBI2_AON_CLK 281
#endif
