diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 48da5df..8a455eb 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -100,7 +100,7 @@
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
-	struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -122,7 +122,7 @@
 mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
 	unsigned long flags;
@@ -150,7 +150,7 @@
 					const struct of_device_id *match)
 {
 	struct mpc52xx_gpiochip *chip;
-	struct mpc52xx_gpio_wkup *regs;
+	struct mpc52xx_gpio_wkup __iomem *regs;
 	struct of_gpio_chip *ofchip;
 	int ret;
 
@@ -260,7 +260,7 @@
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
-	struct mpc52xx_gpio *regs = mm_gc->regs;
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -284,7 +284,7 @@
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
-	struct mpc52xx_gpio *regs = mm_gc->regs;
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -312,7 +312,7 @@
 {
 	struct mpc52xx_gpiochip *chip;
 	struct of_gpio_chip *ofchip;
-	struct mpc52xx_gpio *regs;
+	struct mpc52xx_gpio __iomem *regs;
 	int ret;
 
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -387,7 +387,7 @@
 static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct mpc52xx_gpt *regs = mm_gc->regs;
+	struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
 
 	out_be32(&regs->mode, 0x04);
 
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 31da84c..0e04f8f 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -217,7 +217,7 @@
 static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
 {									\
 	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
-	u##size *dst = b;						\
+	__le##size *dst = b;						\
 	for (; c != 0; c--, dst++)					\
 		*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
 	scc_pciex_io_flush(bus);					\
@@ -231,10 +231,11 @@
 				 unsigned long c)			\
 {									\
 	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
-	const u##size *src = b;						\
+	const __le##size *src = b;					\
 	for (; c != 0; c--, src++)					\
 		__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
 }
+#define __le8 u8
 #define cpu_to_le8(x) (x)
 #define le8_to_cpu(x) (x)
 PCIEX_PIO_FUNC(8, b)
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0d2ef1e..0f45498 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -81,7 +81,7 @@
 
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && (MMU || BROKEN)
 	help
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
new file mode 100644
index 0000000..a0ebd43
--- /dev/null
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -0,0 +1,841 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun  3 13:02:42 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_MD=0
+# CONFIG_TICK_ONESHOT is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_BOOTMEM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 0d0cda90..6b34baa 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Sep 13 16:40:16 2007
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun  3 20:27:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +19,7 @@
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -25,47 +27,82 @@
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 
@@ -81,6 +118,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_CLASSIC_RCU is not set
 
 #
 # System type
@@ -88,7 +126,10 @@
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 CONFIG_CPU_SUBTYPE_SH7206=y
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -97,6 +138,7 @@
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -105,14 +147,17 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -121,23 +166,25 @@
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -183,13 +230,16 @@
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -213,11 +263,15 @@
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_KEXEC is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -225,25 +279,25 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
 
 #
 # Networking
@@ -253,14 +307,24 @@
 #
 # Networking options
 #
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -273,14 +337,13 @@
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -297,10 +360,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -308,6 +367,7 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -329,8 +389,10 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -339,11 +401,9 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -356,6 +416,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -390,7 +451,6 @@
 CONFIG_MTD_PHYSMAP_START=0x20000000
 CONFIG_MTD_PHYSMAP_LEN=0x01000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -418,13 +478,19 @@
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -443,23 +509,30 @@
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -469,28 +542,7 @@
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -502,6 +554,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,106 +573,119 @@
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_SH=y
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -642,10 +708,11 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -658,18 +725,28 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -681,30 +758,20 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -712,7 +779,10 @@
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -722,38 +792,123 @@
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index de45c6a..79baa47 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -242,6 +242,7 @@
 				reg += 8;
 			}
 		}
+	}
 #endif
 
 	/*
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index b3d0a03..5482e65 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -30,6 +30,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <asm/unaligned.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -56,34 +57,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_SUPERH32
-#define COPY_UNALIGNED_WORD(sw, tw, align) \
-{ \
-	void *__s = &(sw), *__t = &(tw); \
-	unsigned short *__s2 = __s, *__t2 = __t; \
-	unsigned char *__s1 = __s, *__t1 = __t; \
-	switch ((align)) \
-	{ \
-	case 0: \
-		*(unsigned long *) __t = *(unsigned long *) __s; \
-		break; \
-	case 2: \
-		*__t2++ = *__s2++; \
-		*__t2 = *__s2; \
-		break; \
-	default: \
-		*__t1++ = *__s1++; \
-		*__t1++ = *__s1++; \
-		*__t1++ = *__s1++; \
-		*__t1 = *__s1; \
-		break; \
-	} \
-}
-#else
-/* One thing SHmedia doesn't screw up! */
-#define COPY_UNALIGNED_WORD(sw, tw, align)	{ (tw) = (sw); }
-#endif
-
 int apply_relocate_add(Elf32_Shdr *sechdrs,
 		   const char *strtab,
 		   unsigned int symindex,
@@ -96,7 +69,6 @@
 	Elf32_Addr relocation;
 	uint32_t *location;
 	uint32_t value;
-	int align;
 
 	pr_debug("Applying relocate section %u to %u\n", relsec,
 		 sechdrs[relsec].sh_info);
@@ -109,7 +81,6 @@
 		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
 			+ ELF32_R_SYM(rel[i].r_info);
 		relocation = sym->st_value + rel[i].r_addend;
-		align = (int)location & 3;
 
 #ifdef CONFIG_SUPERH64
 		/* For text addresses, bit2 of the st_other field indicates
@@ -122,15 +93,15 @@
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 		case R_SH_DIR32:
-			COPY_UNALIGNED_WORD (*location, value, align);
+			value = get_unaligned(location);
 			value += relocation;
-			COPY_UNALIGNED_WORD (value, *location, align);
+			put_unaligned(value, location);
 			break;
 		case R_SH_REL32:
 			relocation = (relocation - (Elf32_Addr) location);
-			COPY_UNALIGNED_WORD (*location, value, align);
+			value = get_unaligned(location);
 			value += relocation;
-			COPY_UNALIGNED_WORD (value, *location, align);
+			put_unaligned(value, location);
 			break;
 		case R_SH_IMM_LOW16:
 			*location = (*location & ~0x3fffc00) |
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 3548ee7..81b7ae3 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -574,6 +574,8 @@
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
 	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on ACER Aspire 2023WLMi */
+	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
+	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
 	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
 	/* end marker */
 	{ 0, }
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index dbf6ca7..3ff8b14 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -118,12 +118,62 @@
 		ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
 }
 
-static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device
-				    *dev, u32 event)
+static void ata_acpi_eject_device(acpi_handle handle)
+{
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = 1;
+
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
+					      &arg_list, NULL)))
+		printk(KERN_ERR "Failed to evaluate _EJ0!\n");
+}
+
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+	if (dev)
+		dev->flags |= ATA_DFLAG_DETACH;
+	else {
+		struct ata_link *tlink;
+		struct ata_device *tdev;
+
+		ata_port_for_each_link(tlink, ap)
+			ata_link_for_each_dev(tdev, tlink)
+				tdev->flags |= ATA_DFLAG_DETACH;
+	}
+
+	ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ * @is_dock_event: boolean indicating whether the event was a dock one
+ *
+ * All ACPI bay / device realted events end up in this function.  If
+ * the event is port-wide @dev is NULL.  If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context.  May sleep.
+ */
+static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
+				    u32 event, int is_dock_event)
 {
 	char event_string[12];
 	char *envp[] = { event_string, NULL };
-	struct ata_eh_info *ehi;
+	struct ata_eh_info *ehi = &ap->link.eh_info;
 	struct kobject *kobj = NULL;
 	int wait = 0;
 	unsigned long flags;
@@ -131,87 +181,100 @@
 	unsigned long sta;
 	acpi_status status;
 
-	if (!ap)
-		ap = dev->link->ap;
-	ehi = &ap->link.eh_info;
-
-	spin_lock_irqsave(ap->lock, flags);
-
-	if (dev)
+	if (dev) {
+		if (dev->sdev)
+			kobj = &dev->sdev->sdev_gendev.kobj;
 		handle = dev->acpi_handle;
-	else
+	} else {
+		kobj = &ap->dev->kobj;
 		handle = ap->acpi_handle;
+	}
 
 	status = acpi_get_handle(handle, "_EJ0", &tmphandle);
-	if (ACPI_FAILURE(status)) {
-		/* This device is not ejectable */
-		spin_unlock_irqrestore(ap->lock, flags);
+	if (ACPI_FAILURE(status))
+		/* This device does not support hotplug */
 		return;
-	}
 
-	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-	if (ACPI_FAILURE(status)) {
-		printk ("Unable to determine bay status\n");
-		spin_unlock_irqrestore(ap->lock, flags);
-		return;
-	}
+	spin_lock_irqsave(ap->lock, flags);
 
 	switch (event) {
 	case ACPI_NOTIFY_BUS_CHECK:
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		ata_ehi_push_desc(ehi, "ACPI event");
-		if (!sta) {
-                /* Device has been unplugged */
-			if (dev)
-				dev->flags |= ATA_DFLAG_DETACH;
-			else {
-				struct ata_link *tlink;
-				struct ata_device *tdev;
 
-				ata_port_for_each_link(tlink, ap) {
-					ata_link_for_each_dev(tdev, tlink) {
-						tdev->flags |=
-							ATA_DFLAG_DETACH;
-					}
-				}
-			}
-			ata_port_schedule_eh(ap);
-			wait = 1;
-		} else {
+		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+		if (ACPI_FAILURE(status)) {
+			ata_port_printk(ap, KERN_ERR,
+				"acpi: failed to determine bay status (0x%x)\n",
+				status);
+			break;
+		}
+
+		if (sta) {
 			ata_ehi_hotplugged(ehi);
 			ata_port_freeze(ap);
+		} else {
+			/* The device has gone - unplug it */
+			ata_acpi_detach_device(ap, dev);
+			wait = 1;
 		}
+		break;
+	case ACPI_NOTIFY_EJECT_REQUEST:
+		ata_ehi_push_desc(ehi, "ACPI event");
+
+		if (!is_dock_event)
+			break;
+
+		/* undock event - immediate unplug */
+		ata_acpi_detach_device(ap, dev);
+		wait = 1;
+		break;
 	}
 
+	/* make sure kobj doesn't go away while ap->lock is released */
+	kobject_get(kobj);
+
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	if (wait)
+	if (wait) {
 		ata_port_wait_eh(ap);
+		ata_acpi_eject_device(handle);
+	}
 
-	if (dev) {
-		if (dev->sdev)
-			kobj = &dev->sdev->sdev_gendev.kobj;
-	} else
-		kobj = &ap->dev->kobj;
-
-	if (kobj) {
+	if (kobj && !is_dock_event) {
 		sprintf(event_string, "BAY_EVENT=%d", event);
 		kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
 	}
+
+	kobject_put(kobj);
+}
+
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+	struct ata_device *dev = data;
+
+	ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+	struct ata_port *ap = data;
+
+	ata_acpi_handle_hotplug(ap, NULL, event, 1);
 }
 
 static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct ata_device *dev = data;
 
-	ata_acpi_handle_hotplug(NULL, dev, event);
+	ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0);
 }
 
 static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct ata_port *ap = data;
 
-	ata_acpi_handle_hotplug(ap, NULL, event);
+	ata_acpi_handle_hotplug(ap, NULL, event, 0);
 }
 
 /**
@@ -252,7 +315,7 @@
 						    ata_acpi_ap_notify, ap);
 			/* we might be on a docking station */
 			register_hotplug_dock_device(ap->acpi_handle,
-						     ata_acpi_ap_notify, ap);
+					     ata_acpi_ap_notify_dock, ap);
 		}
 
 		for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
@@ -264,7 +327,7 @@
 						ata_acpi_dev_notify, dev);
 				/* we might be on a docking station */
 				register_hotplug_dock_device(dev->acpi_handle,
-						ata_acpi_dev_notify, dev);
+					     ata_acpi_dev_notify_dock, dev);
 			}
 		}
 	}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 3c2d228..90d20c6 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -247,7 +247,7 @@
  *	LOCKING:
  *	Inherited from caller.
  */
-u8 ata_sff_altstatus(struct ata_port *ap)
+static u8 ata_sff_altstatus(struct ata_port *ap)
 {
 	if (ap->ops->sff_check_altstatus)
 		return ap->ops->sff_check_altstatus(ap);
@@ -256,6 +256,93 @@
 }
 
 /**
+ *	ata_sff_irq_status - Check if the device is busy
+ *	@ap: port where the device is
+ *
+ *	Determine if the port is currently busy. Uses altstatus
+ *	if available in order to avoid clearing shared IRQ status
+ *	when finding an IRQ source. Non ctl capable devices don't
+ *	share interrupt lines fortunately for us.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static u8 ata_sff_irq_status(struct ata_port *ap)
+{
+	u8 status;
+
+	if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+		status = ata_sff_altstatus(ap);
+		/* Not us: We are busy */
+		if (status & ATA_BUSY)
+		    	return status;
+	}
+	/* Clear INTRQ latch */
+	status = ata_sff_check_status(ap);
+	return status;
+}
+
+/**
+ *	ata_sff_sync - Flush writes
+ *	@ap: Port to wait for.
+ *
+ *	CAUTION:
+ *	If we have an mmio device with no ctl and no altstatus
+ *	method this will fail. No such devices are known to exist.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+static void ata_sff_sync(struct ata_port *ap)
+{
+	if (ap->ops->sff_check_altstatus)
+		ap->ops->sff_check_altstatus(ap);
+	else if (ap->ioaddr.altstatus_addr)
+		ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ *	ata_sff_pause		-	Flush writes and wait 400nS
+ *	@ap: Port to pause for.
+ *
+ *	CAUTION:
+ *	If we have an mmio device with no ctl and no altstatus
+ *	method this will fail. No such devices are known to exist.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+void ata_sff_pause(struct ata_port *ap)
+{
+	ata_sff_sync(ap);
+	ndelay(400);
+}
+
+/**
+ *	ata_sff_dma_pause	-	Pause before commencing DMA
+ *	@ap: Port to pause for.
+ *
+ *	Perform I/O fencing and ensure sufficient cycle delays occur
+ *	for the HDMA1:0 transition
+ */
+ 
+void ata_sff_dma_pause(struct ata_port *ap)
+{
+	if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+		/* An altstatus read will cause the needed delay without
+		   messing up the IRQ status */
+		ata_sff_altstatus(ap);
+		return;
+	}
+	/* There are no DMA controllers without ctl. BUG here to ensure
+	   we never violate the HDMA1:0 transition timing and risk
+	   corruption. */
+	BUG();
+}
+
+/**
  *	ata_sff_busy_sleep - sleep until BSY clears, or timeout
  *	@ap: port containing status register to be polled
  *	@tmout_pat: impatience timeout
@@ -742,7 +829,7 @@
 	} else
 		ata_pio_sector(qc);
 
-	ata_sff_altstatus(qc->ap); /* flush */
+	ata_sff_sync(qc->ap); /* flush */
 }
 
 /**
@@ -763,8 +850,9 @@
 	WARN_ON(qc->dev->cdb_len < 12);
 
 	ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
-	ata_sff_altstatus(ap); /* flush */
-
+	ata_sff_sync(ap);
+	/* FIXME: If the CDB is for DMA do we need to do the transition delay
+	   or is bmdma_start guaranteed to do it ? */
 	switch (qc->tf.protocol) {
 	case ATAPI_PROT_PIO:
 		ap->hsm_task_state = HSM_ST;
@@ -905,7 +993,7 @@
 
 	if (unlikely(__atapi_pio_bytes(qc, bytes)))
 		goto err_out;
-	ata_sff_altstatus(ap); /* flush */
+	ata_sff_sync(ap); /* flush */
 
 	return;
 
@@ -1489,14 +1577,10 @@
 		goto idle_irq;
 	}
 
-	/* check altstatus */
-	status = ata_sff_altstatus(ap);
-	if (status & ATA_BUSY)
-		goto idle_irq;
 
-	/* check main status, clearing INTRQ */
-	status = ap->ops->sff_check_status(ap);
-	if (unlikely(status & ATA_BUSY))
+	/* check main status, clearing INTRQ if needed */
+	status = ata_sff_irq_status(ap);
+	if (status & ATA_BUSY)
 		goto idle_irq;
 
 	/* ack bmdma irq events */
@@ -2030,7 +2114,7 @@
 		ap->ops->bmdma_stop(qc);
 	}
 
-	ata_sff_altstatus(ap);
+	ata_sff_sync(ap);		/* FIXME: We don't need this */
 	ap->ops->sff_check_status(ap);
 	ap->ops->sff_irq_clear(ap);
 
@@ -2203,7 +2287,7 @@
 		 mmio + ATA_DMA_CMD);
 
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_sff_altstatus(ap);        /* dummy read */
+	ata_sff_dma_pause(ap);
 }
 
 /**
@@ -2722,7 +2806,8 @@
 EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
 EXPORT_SYMBOL_GPL(ata_sff_dev_select);
 EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
+EXPORT_SYMBOL_GPL(ata_sff_pause);
 EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
 EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
 EXPORT_SYMBOL_GPL(ata_sff_tf_load);
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 1713843..cf9e984 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -270,7 +270,7 @@
 	disable_dma(state->dma);
 
 	/* see ata_bmdma_stop */
-	ata_sff_altstatus(ap);
+	ata_sff_dma_pause(ap);
 }
 
 static u8 pata_icside_bmdma_status(struct ata_port *ap)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index a108d25..f8b3ffc 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -57,7 +57,9 @@
 	struct ata_host *ah = ap->host;
 	struct rb532_cf_info *info = ah->private_data;
 
-	ata_sff_altstatus(ap);
+	/* FIXME: Keep previous delay. If this is merely a fence then
+	   ata_sff_sync might be sufficient. */
+	ata_sff_dma_pause(ap);
 	ndelay(RB500_CF_IO_DELAY);
 
 	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index e965b25..bbf5aa3 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -726,7 +726,7 @@
 		 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
 
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_sff_altstatus(ap);	/* dummy read */
+	ata_sff_dma_pause(ap);	/* dummy read */
 }
 
 /**
@@ -747,7 +747,8 @@
 		return host_stat;
 
 	/* errata A252,A308 workaround: Step4 */
-	if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+	if ((scc_check_altstatus(ap) & ATA_ERR)
+					&& (int_status & INTSTS_INTRQ))
 		return (host_stat | ATA_DMA_INTR);
 
 	/* errata A308 workaround Step5 */
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index acf347f..60391e9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -224,6 +224,11 @@
 
 	PHY_MODE3		= 0x310,
 	PHY_MODE4		= 0x314,
+	PHY_MODE4_CFG_MASK	= 0x00000003,	/* phy internal config field */
+	PHY_MODE4_CFG_VALUE	= 0x00000001,	/* phy internal config field */
+	PHY_MODE4_RSVD_ZEROS	= 0x5de3fffa,	/* Gen2e always write zeros */
+	PHY_MODE4_RSVD_ONES	= 0x00000005,	/* Gen2e always write ones */
+
 	PHY_MODE2		= 0x330,
 	SATA_IFCTL_OFS		= 0x344,
 	SATA_TESTCTL_OFS	= 0x348,
@@ -2563,17 +2568,16 @@
 		m3 &= ~0x1c;
 
 	if (fix_phy_mode4) {
-		u32 m4;
-
-		m4 = readl(port_mmio + PHY_MODE4);
-
-		/* workaround for errata FEr SATA#10 (part 1) */
-		m4 = (m4 & ~(1 << 1)) | (1 << 0);
-
-		/* enforce bit restrictions on GenIIe devices */
+		u32 m4 = readl(port_mmio + PHY_MODE4);
+		/*
+		 * Enforce reserved-bit restrictions on GenIIe devices only.
+		 * For earlier chipsets, force only the internal config field
+		 *  (workaround for errata FEr SATA#10 part 1).
+		 */
 		if (IS_GEN_IIE(hpriv))
-			m4 = (m4 & ~0x5DE3FFFC) | (1 << 2);
-
+			m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+		else
+			m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
 		writel(m4, port_mmio + PHY_MODE4);
 	}
 	/*
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 5c006c9..c9416e6 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -189,8 +189,8 @@
 struct aem_find_firmware_req {
 	struct aem_iana_id	id;
 	u8			rsvd;
-	u16			index;
-	u16			module_type_id;
+	__be16			index;
+	__be16			module_type_id;
 } __packed;
 
 struct aem_find_firmware_resp {
@@ -202,7 +202,7 @@
 struct aem_find_instance_req {
 	struct aem_iana_id	id;
 	u8			instance_number;
-	u16			module_type_id;
+	__be16			module_type_id;
 } __packed;
 
 struct aem_find_instance_resp {
@@ -444,17 +444,17 @@
 	}
 	case 2: {
 		u16 *x = buf;
-		*x = be16_to_cpup((u16 *)rs_resp->bytes);
+		*x = be16_to_cpup((__be16 *)rs_resp->bytes);
 		break;
 	}
 	case 4: {
 		u32 *x = buf;
-		*x = be32_to_cpup((u32 *)rs_resp->bytes);
+		*x = be32_to_cpup((__be32 *)rs_resp->bytes);
 		break;
 	}
 	case 8: {
 		u64 *x = buf;
-		*x = be64_to_cpup((u64 *)rs_resp->bytes);
+		*x = be64_to_cpup((__be64 *)rs_resp->bytes);
 		break;
 	}
 	}
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 3cdd4e9..1e24ab4 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1238,8 +1238,6 @@
 	sh->max_id = ioc->pfacts->MaxDevices;
 	sh->max_lun = max_lun;
 
-	sh->this_id = ioc->pfacts[0].PortSCSIID;
-
 	/* Required entry.
 	 */
 	sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4684807..4d492ba 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3193,8 +3193,6 @@
 
 	sh->transportt = mptsas_transport_template;
 
-	sh->this_id = ioc->pfacts[0].PortSCSIID;
-
 	/* Required entry.
 	 */
 	sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b109bd8..c68ef00 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2451,12 +2451,6 @@
 		    ioc->name, sdev->sdtr, sdev->wdtr,
 		    sdev->ppr, sdev->inquiry_len));
 
-	if (sdev->id > sh->max_id) {
-		/* error case, should never happen */
-		scsi_adjust_queue_depth(sdev, 0, 1);
-		goto slave_configure_exit;
-	}
-
 	vdevice->configured_lun = 1;
 	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 
@@ -2470,8 +2464,6 @@
 		    ioc->name, vtarget->negoFlags, vtarget->maxOffset,
 		    vtarget->minSyncFactor));
 
-slave_configure_exit:
-
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"tagged %d, simple %d, ordered %d\n",
 		ioc->name,sdev->tagged_supported, sdev->simple_tags,
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index fa39410..e4ff50b 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -102,7 +102,6 @@
 #include <linux/nmi.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
-#include <linux/delay.h>
 
 #define v1printk(a...) do { \
 	if (verbose) \
@@ -119,7 +118,6 @@
 	} while (0)
 #define MAX_CONFIG_LEN		40
 
-static const char hexchars[] = "0123456789abcdef";
 static struct kgdb_io kgdbts_io_ops;
 static char get_buf[BUFMAX];
 static int get_buf_cnt;
@@ -131,6 +129,8 @@
 static int test_complete;
 static int send_ack;
 static int final_ack;
+static int force_hwbrks;
+static int hwbreaks_ok;
 static int hw_break_val;
 static int hw_break_val2;
 #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
@@ -234,12 +234,12 @@
 
 static void sw_break(char *arg)
 {
-	break_helper("Z0", arg, 0);
+	break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0);
 }
 
 static void sw_rem_break(char *arg)
 {
-	break_helper("z0", arg, 0);
+	break_helper(force_hwbrks ? "z1" : "z0", arg, 0);
 }
 
 static void hw_break(char *arg)
@@ -619,8 +619,8 @@
 		count++;
 	}
 	strcat(get_buf, "#");
-	get_buf[count + 2] = hexchars[checksum >> 4];
-	get_buf[count + 3] = hexchars[checksum & 0xf];
+	get_buf[count + 2] = hex_asc_hi(checksum);
+	get_buf[count + 3] = hex_asc_lo(checksum);
 	get_buf[count + 4] = '\0';
 	v2printk("get%i: %s\n", ts.idx, get_buf);
 }
@@ -781,6 +781,8 @@
 		return;
 
 	eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+	if (is_hw_breakpoint)
+		hwbreaks_ok = 0;
 }
 
 static void run_hw_break_test(int is_write_test)
@@ -798,9 +800,11 @@
 	kgdb_breakpoint();
 	hw_break_val_access();
 	if (is_write_test) {
-		if (test_complete == 2)
+		if (test_complete == 2) {
 			eprintk("kgdbts: ERROR %s broke on access\n",
 				ts.name);
+			hwbreaks_ok = 0;
+		}
 		hw_break_val_write();
 	}
 	kgdb_breakpoint();
@@ -809,6 +813,7 @@
 		return;
 
 	eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+	hwbreaks_ok = 0;
 }
 
 static void run_nmi_sleep_test(int nmi_sleep)
@@ -912,6 +917,7 @@
 
 	/* All HW break point tests */
 	if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+		hwbreaks_ok = 1;
 		v1printk("kgdbts:RUN hw breakpoint test\n");
 		run_breakpoint_test(1);
 		v1printk("kgdbts:RUN hw write breakpoint test\n");
@@ -925,6 +931,19 @@
 		run_nmi_sleep_test(nmi_sleep);
 	}
 
+#ifdef CONFIG_DEBUG_RODATA
+	/* Until there is an api to write to read-only text segments, use
+	 * HW breakpoints for the remainder of any tests, else print a
+	 * failure message if hw breakpoints do not work.
+	 */
+	if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
+		eprintk("kgdbts: HW breakpoints do not work,"
+			"skipping remaining tests\n");
+		return;
+	}
+	force_hwbrks = 1;
+#endif /* CONFIG_DEBUG_RODATA */
+
 	/* If the do_fork test is run it will be the last test that is
 	 * executed because a kernel thread will be spawned at the very
 	 * end to unregister the debug hooks.
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index a20693e..b5c1e66 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2861,7 +2861,8 @@
 	struct config_param *config;
 	struct mac_info *mac_control;
 	int pkts_processed = 0;
-	u8 *addr = NULL, val8 = 0;
+	u8 __iomem *addr = NULL;
+	u8 val8 = 0;
 	struct s2io_nic *nic = dev->priv;
 	struct XENA_dev_config __iomem *bar0 = nic->bar0;
 	int budget_org = budget;
@@ -2878,7 +2879,7 @@
 	if (pkts_processed < budget_org) {
 		netif_rx_complete(dev, napi);
 		/*Re Enable MSI-Rx Vector*/
-		addr = (u8 *)&bar0->xmsi_mask_reg;
+		addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
 		addr += 7 - ring->ring_no;
 		val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
 		writeb(val8, addr);
@@ -4364,9 +4365,10 @@
 		return IRQ_HANDLED;
 
 	if (sp->config.napi) {
-		u8 *addr = NULL, val8 = 0;
+		u8 __iomem *addr = NULL;
+		u8 val8 = 0;
 
-		addr = (u8 *)&bar0->xmsi_mask_reg;
+		addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
 		addr += (7 - ring->ring_no);
 		val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
 		writeb(val8, addr);
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index e2b7de4..1ff3bb5 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -286,7 +286,7 @@
 					pci_name(pdev), i,
 					(unsigned long long) pci_start,
 					(unsigned long long) pci_end);
-				res->flags = 0;
+				res->flags |= IORESOURCE_DISABLED;
 			}
 		}
 	}
diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c
index 9c2496d..8f0a570 100644
--- a/drivers/pnp/system.c
+++ b/drivers/pnp/system.c
@@ -81,7 +81,7 @@
 	}
 
 	for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
-		if (res->flags & IORESOURCE_UNSET)
+		if (res->flags & IORESOURCE_DISABLED)
 			continue;
 
 		reserve_range(dev, res->start, res->end, 0);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ccfd8ac..5d23368 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1348,7 +1348,7 @@
 
 	del_timer(&evt_struct->timer);
 
-	if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+	if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd)
 		evt_struct->cmnd->result = DID_ERROR << 16;
 	if (evt_struct->done)
 		evt_struct->done(evt_struct);
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 4c4aadb..2046045 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -65,7 +65,8 @@
 	VIOSRP_VIOLATES_MAX_XFER = 0x2,
 	VIOSRP_PARTNER_PANIC = 0x3,
 	VIOSRP_DEVICE_BUSY = 0x8,
-	VIOSRP_ADAPTER_FAIL = 0x10
+	VIOSRP_ADAPTER_FAIL = 0x10,
+	VIOSRP_OK2 = 0x99,
 };
 
 struct viosrp_crq {
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 2876908..8dd88fc 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -70,6 +70,9 @@
 	case 2:
 		qla2x00_alloc_fw_dump(ha);
 		break;
+	case 3:
+		qla2x00_system_error(ha);
+		break;
 	}
 	return (count);
 }
@@ -886,9 +889,13 @@
 static void
 qla2x00_get_host_port_type(struct Scsi_Host *shost)
 {
-	scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost));
+	scsi_qla_host_t *ha = shost_priv(shost);
 	uint32_t port_type = FC_PORTTYPE_UNKNOWN;
 
+	if (ha->parent) {
+		fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+		return;
+	}
 	switch (ha->current_topology) {
 	case ISP_CFG_NL:
 		port_type = FC_PORTTYPE_LPORT;
@@ -1172,10 +1179,10 @@
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
 
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	ha->cur_vport_count--;
 	clear_bit(vha->vp_idx, ha->vp_idx_map);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	kfree(vha->node_name);
 	kfree(vha->port_name);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 299eccf..8dd60001 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2457,7 +2457,7 @@
 #define MBX_INTR_WAIT	2
 #define MBX_UPDATE_FLASH_ACTIVE	3
 
-	struct semaphore vport_sem;	/* Virtual port synchronization */
+	struct mutex vport_lock;	/* Virtual port synchronization */
 	struct completion mbx_cmd_comp;	/* Serialize mbx access */
 	struct completion mbx_intr_comp;  /* Used for completion notification */
 
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f882706..9b4bebe 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -228,6 +228,9 @@
 extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
 
 extern int
+qla2x00_system_error(scsi_qla_host_t *);
+
+extern int
 qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
 
 extern int
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index e9bae27..92fafbd 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -34,7 +34,11 @@
 static inline void
 qla2x00_poll(scsi_qla_host_t *ha)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	ha->isp_ops->intr_handler(0, ha);
+	local_irq_restore(flags);
 }
 
 static __inline__ scsi_qla_host_t *
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 5d9a64a..ec63b79 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -272,8 +272,6 @@
 	uint32_t	rscn_entry, host_pid;
 	uint8_t		rscn_queue_index;
 	unsigned long	flags;
-	scsi_qla_host_t	*vha;
-	int		i;
 
 	/* Setup to process RIO completion. */
 	handle_cnt = 0;
@@ -544,18 +542,10 @@
 		break;
 
 	case MBA_PORT_UPDATE:		/* Port database update */
-		if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
-			for_each_mapped_vp_idx(ha, i) {
-				list_for_each_entry(vha, &ha->vp_list,
-				    vp_list) {
-					if ((mb[3] & 0xff)
-					    == vha->vp_idx) {
-						ha = vha;
-						break;
-					}
-				}
-			}
-		}
+		/* Only handle SCNs for our Vport index. */
+		if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+			break;
+
 		/*
 		 * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
 		 * event etc. earlier indicating loop is down) then process
@@ -590,18 +580,12 @@
 		break;
 
 	case MBA_RSCN_UPDATE:		/* State Change Registration */
-		if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
-			for_each_mapped_vp_idx(ha, i) {
-				list_for_each_entry(vha, &ha->vp_list,
-				    vp_list) {
-					if ((mb[3] & 0xff)
-					    == vha->vp_idx) {
-						ha = vha;
-						break;
-					}
-				}
-			}
-		}
+		/* Check if the Vport has issued a SCR */
+		if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags))
+			break;
+		/* Only handle SCNs for our Vport index. */
+		if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+			break;
 
 		DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
 		    ha->host_no));
@@ -1132,25 +1116,6 @@
 				break;
 
 			qla2x00_handle_sense(sp, sense_data, sense_len);
-
-			/*
-			 * In case of a Underrun condition, set both the lscsi
-			 * status and the completion status to appropriate
-			 * values.
-			 */
-			if (resid &&
-			    ((unsigned)(scsi_bufflen(cp) - resid) <
-			     cp->underflow)) {
-				DEBUG2(qla_printk(KERN_INFO, ha,
-				    "scsi(%ld:%d:%d:%d): Mid-layer underflow "
-				    "detected (%x of %x bytes)...returning "
-				    "error status.\n", ha->host_no,
-				    cp->device->channel, cp->device->id,
-				    cp->device->lun, resid,
-				    scsi_bufflen(cp)));
-
-				cp->result = DID_ERROR << 16 | lscsi_status;
-			}
 		} else {
 			/*
 			 * If RISC reports underrun and target does not report
@@ -1639,12 +1604,12 @@
 	ha = dev_id;
 	reg = &ha->iobase->isp24;
 
-	spin_lock(&ha->hardware_lock);
+	spin_lock_irq(&ha->hardware_lock);
 
 	qla24xx_process_response_queue(ha);
 	WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 
-	spin_unlock(&ha->hardware_lock);
+	spin_unlock_irq(&ha->hardware_lock);
 
 	return IRQ_HANDLED;
 }
@@ -1663,7 +1628,7 @@
 	reg = &ha->iobase->isp24;
 	status = 0;
 
-	spin_lock(&ha->hardware_lock);
+	spin_lock_irq(&ha->hardware_lock);
 	do {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1716,7 +1681,7 @@
 		}
 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 	} while (0);
-	spin_unlock(&ha->hardware_lock);
+	spin_unlock_irq(&ha->hardware_lock);
 
 	if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
 	    (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 2100604..250d2f6 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2303,8 +2303,6 @@
 	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
 }
 
-#if 0
-
 int
 qla2x00_system_error(scsi_qla_host_t *ha)
 {
@@ -2312,7 +2310,7 @@
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	if (!IS_FWI2_CAPABLE(ha))
+	if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha))
 		return QLA_FUNCTION_FAILED;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
@@ -2334,8 +2332,6 @@
 	return rval;
 }
 
-#endif  /*  0  */
-
 /**
  * qla2x00_set_serdes_params() -
  * @ha: HA context
@@ -2508,7 +2504,7 @@
 		if (mb)
 			memcpy(mb, mcp->mb, 8 * sizeof(*mb));
 		if (dwords)
-			*dwords = mcp->mb[6];
+			*dwords = buffers;
 	}
 
 	return rval;
@@ -2807,9 +2803,9 @@
 	 */
 	map = (vp_index - 1) / 8;
 	pos = (vp_index - 1) & 7;
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	vce->vp_idx_map[map] |= 1 << pos;
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0);
 	if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f2b0497..62a3ad6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -32,12 +32,12 @@
 	scsi_qla_host_t *ha = vha->parent;
 
 	/* Find an empty slot and assign an vp_id */
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
 	if (vp_id > ha->max_npiv_vports) {
 		DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
 		    vp_id, ha->max_npiv_vports));
-		up(&ha->vport_sem);
+		mutex_unlock(&ha->vport_lock);
 		return vp_id;
 	}
 
@@ -45,7 +45,7 @@
 	ha->num_vhosts++;
 	vha->vp_idx = vp_id;
 	list_add_tail(&vha->vp_list, &ha->vp_list);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 	return vp_id;
 }
 
@@ -55,12 +55,12 @@
 	uint16_t vp_id;
 	scsi_qla_host_t *ha = vha->parent;
 
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	vp_id = vha->vp_idx;
 	ha->num_vhosts--;
 	clear_bit(vp_id, ha->vp_idx_map);
 	list_del(&vha->vp_list);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 }
 
 static scsi_qla_host_t *
@@ -145,9 +145,9 @@
 	}
 
 	/* Initialize the new vport unless it is a persistent port */
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	ret = qla24xx_modify_vp_config(vha);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	if (ret != QLA_SUCCESS) {
 		fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
@@ -406,6 +406,7 @@
 	INIT_LIST_HEAD(&vha->list);
 	INIT_LIST_HEAD(&vha->fcports);
 	INIT_LIST_HEAD(&vha->vp_fcports);
+	INIT_LIST_HEAD(&vha->work_list);
 
 	vha->dpc_flags = 0L;
 	set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
@@ -437,10 +438,10 @@
 	vha->flags.init_done = 1;
 	num_hosts++;
 
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	set_bit(vha->vp_idx, ha->vp_idx_map);
 	ha->cur_vport_count++;
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	return vha;
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3223fd1..48eaa3b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -10,6 +10,7 @@
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
+#include <linux/mutex.h>
 
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsicam.h>
@@ -1631,7 +1632,7 @@
 	/* load the F/W, read paramaters, and init the H/W */
 	ha->instance = num_hosts;
 
-	init_MUTEX(&ha->vport_sem);
+	mutex_init(&ha->vport_lock);
 	init_completion(&ha->mbx_cmd_comp);
 	complete(&ha->mbx_cmd_comp);
 	init_completion(&ha->mbx_intr_comp);
@@ -2156,13 +2157,14 @@
 qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
 {
 	unsigned long flags;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	if (!locked)
-		spin_lock_irqsave(&ha->hardware_lock, flags);
+		spin_lock_irqsave(&pha->hardware_lock, flags);
 	list_add_tail(&e->list, &ha->work_list);
 	qla2xxx_wake_dpc(ha);
 	if (!locked)
-		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+		spin_unlock_irqrestore(&pha->hardware_lock, flags);
 	return QLA_SUCCESS;
 }
 
@@ -2202,12 +2204,13 @@
 qla2x00_do_work(struct scsi_qla_host *ha)
 {
 	struct qla_work_evt *e;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
-	spin_lock_irq(&ha->hardware_lock);
+	spin_lock_irq(&pha->hardware_lock);
 	while (!list_empty(&ha->work_list)) {
 		e = list_entry(ha->work_list.next, struct qla_work_evt, list);
 		list_del_init(&e->list);
-		spin_unlock_irq(&ha->hardware_lock);
+		spin_unlock_irq(&pha->hardware_lock);
 
 		switch (e->type) {
 		case QLA_EVT_AEN:
@@ -2221,9 +2224,9 @@
 		}
 		if (e->flags & QLA_EVT_FLAG_FREE)
 			kfree(e);
-		spin_lock_irq(&ha->hardware_lock);
+		spin_lock_irq(&pha->hardware_lock);
 	}
-	spin_unlock_irq(&ha->hardware_lock);
+	spin_unlock_irq(&pha->hardware_lock);
 }
 
 /**************************************************************************
@@ -2634,7 +2637,7 @@
 #define FW_FILE_ISP24XX	"ql2400_fw.bin"
 #define FW_FILE_ISP25XX	"ql2500_fw.bin"
 
-static DECLARE_MUTEX(qla_fw_lock);
+static DEFINE_MUTEX(qla_fw_lock);
 
 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
 	{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
@@ -2665,7 +2668,7 @@
 		blob = &qla_fw_blobs[FW_ISP25XX];
 	}
 
-	down(&qla_fw_lock);
+	mutex_lock(&qla_fw_lock);
 	if (blob->fw)
 		goto out;
 
@@ -2678,7 +2681,7 @@
 	}
 
 out:
-	up(&qla_fw_lock);
+	mutex_unlock(&qla_fw_lock);
 	return blob;
 }
 
@@ -2687,11 +2690,11 @@
 {
 	int idx;
 
-	down(&qla_fw_lock);
+	mutex_lock(&qla_fw_lock);
 	for (idx = 0; idx < FW_BLOBS; idx++)
 		if (qla_fw_blobs[idx].fw)
 			release_firmware(qla_fw_blobs[idx].fw);
-	up(&qla_fw_lock);
+	mutex_unlock(&qla_fw_lock);
 }
 
 static pci_ers_result_t
@@ -2864,7 +2867,8 @@
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
+	printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+	    qla2x00_version_str);
 	ret = pci_register_driver(&qla2xxx_pci_driver);
 	if (ret) {
 		kmem_cache_destroy(srb_cachep);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index afeae2b..d058c88 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k2"
+#define QLA2XXX_VERSION      "8.02.01-k4"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	2
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 049103f..93d2b67 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -359,7 +359,12 @@
 
 static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
-	struct scsi_device *sdev = to_scsi_device(dev);
+	struct scsi_device *sdev;
+
+	if (dev->type != &scsi_dev_type)
+		return 0;
+
+	sdev = to_scsi_device(dev);
 
 	add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
 	return 0;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 53b03c6..951a75e 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@
 	return ret;
 }
 
+static void uart_set_ldisc(struct tty_struct *tty, int ldisc)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port = state->port;
+
+	if (port->ops->set_ldisc)
+		port->ops->set_ldisc(port);
+}
+
 static void uart_set_termios(struct tty_struct *tty,
 						struct ktermios *old_termios)
 {
@@ -2288,6 +2297,7 @@
 	.unthrottle	= uart_unthrottle,
 	.send_xchar	= uart_send_xchar,
 	.set_termios	= uart_set_termios,
+	.set_ldisc	= uart_set_ldisc,
 	.stop		= uart_stop,
 	.start		= uart_start,
 	.hangup		= uart_hangup,
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
index 5100fbb..a9636f4 100644
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -120,7 +120,7 @@
  * Only data is little endian, addr has cpu endianess
  */
 static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
-				 u16 *data, u16 count)
+				 __le16 *data, u16 count)
 {
 	unsigned long flags;
 	int i;
@@ -129,7 +129,7 @@
 
 	hpi_write_reg(dev, HPI_ADDR, addr);
 	for (i = 0; i < count; i++)
-		hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+		hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
 
 	spin_unlock_irqrestore(&dev->hpi.lock, flags);
 }
@@ -138,7 +138,7 @@
  * Only data is little endian, addr has cpu endianess
  */
 static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
-				u16 *data, u16 count)
+				__le16 *data, u16 count)
 {
 	unsigned long flags;
 	int i;
@@ -146,7 +146,7 @@
 	spin_lock_irqsave(&dev->hpi.lock, flags);
 	hpi_write_reg(dev, HPI_ADDR, addr);
 	for (i = 0; i < count; i++)
-		*data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+		*data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
 
 	spin_unlock_irqrestore(&dev->hpi.lock, flags);
 }
@@ -425,7 +425,7 @@
 		len--;
 	}
 
-	hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+	hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
 	buf += len & ~0x01;
 	addr += len & ~0x01;
 	len &= 0x01;
@@ -456,7 +456,7 @@
 		len--;
 	}
 
-	hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+	hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
 	buf += len & ~0x01;
 	addr += len & ~0x01;
 	len &= 0x01;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 107666d..731db05 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -611,8 +611,8 @@
 		goto err;
 	}
 
-	desc->wMaxPacketSize = ep->wMaxPacketSize;
-	desc->bMaxPacketSize0 = cpu_to_le16(udev->descriptor.bMaxPacketSize0);
+	desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+	desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
 
 	desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
 	if (!desc->orq)
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 440bf94..c9db3fe 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -104,8 +104,8 @@
 static u32 iolength;
 static u32 pci_mem_phy0;
 static u32 length;
-static u8 *chip_addr;
-static u8 *iobase;
+static u8 __iomem *chip_addr;
+static u8 __iomem *iobase;
 
 static int __devinit isp1761_pci_probe(struct pci_dev *dev,
 		const struct pci_device_id *id)
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 9b8b4cf..fb655b4 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3927,9 +3927,9 @@
 	}
 
 	ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals);
-	if (ref->VersionNumber != 3) {
+	if (ref->VersionNumber != cpu_to_le16(3)) {
 		cERROR(1, ("Referrals of V%d version are not supported,"
-			"should be V3", ref->VersionNumber));
+			"should be V3", le16_to_cpu(ref->VersionNumber)));
 		rc = -EINVAL;
 		goto parse_DFS_referrals_exit;
 	}
@@ -3977,7 +3977,7 @@
 		if (rc)
 			goto parse_DFS_referrals_exit;
 
-		ref += ref->Size;
+		ref += le16_to_cpu(ref->Size);
 	}
 
 parse_DFS_referrals_exit:
diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h
index 4bc8357..14b7ac2 100644
--- a/include/asm-sh/checksum_32.h
+++ b/include/asm-sh/checksum_32.h
@@ -109,7 +109,7 @@
 	   will assume they contain their original values. */
 	: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
 	: "1" (iph), "2" (ihl)
-	: "t");
+	: "t", "memory");
 
 	return	csum_fold(sum);
 }
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4a92fba..e57e5d0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -111,13 +111,10 @@
 	/* various global constants */
 	LIBATA_MAX_PRD		= ATA_MAX_PRD / 2,
 	LIBATA_DUMB_MAX_PRD	= ATA_MAX_PRD / 4,	/* Worst case */
-	ATA_MAX_PORTS		= 8,
 	ATA_DEF_QUEUE		= 1,
 	/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
 	ATA_MAX_QUEUE		= 32,
 	ATA_TAG_INTERNAL	= ATA_MAX_QUEUE - 1,
-	ATA_MAX_BUS		= 2,
-	ATA_DEF_BUSY_WAIT	= 10000,
 	ATA_SHORT_PAUSE		= (HZ >> 6) + 1,
 
 	ATAPI_MAX_DRAIN		= 16 << 10,
@@ -1435,7 +1432,8 @@
 extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
 extern u8 ata_sff_check_status(struct ata_port *ap);
-extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
 extern int ata_sff_busy_sleep(struct ata_port *ap,
 			      unsigned long timeout_pat, unsigned long timeout);
 extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
@@ -1496,19 +1494,6 @@
 #endif /* CONFIG_PCI */
 
 /**
- *	ata_sff_pause - Flush writes and pause 400 nanoseconds.
- *	@ap: Port to wait for.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-static inline void ata_sff_pause(struct ata_port *ap)
-{
-	ata_sff_altstatus(ap);
-	ndelay(400);
-}
-
-/**
  *	ata_sff_busy_wait - Wait for a port status register
  *	@ap: Port to wait for.
  *	@bits: bits that must be clear
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d32123a..d8f31de 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -192,6 +192,7 @@
 	void		(*shutdown)(struct uart_port *);
 	void		(*set_termios)(struct uart_port *, struct ktermios *new,
 				       struct ktermios *old);
+	void		(*set_ldisc)(struct uart_port *);
 	void		(*pm)(struct uart_port *, unsigned int state,
 			      unsigned int oldstate);
 	int		(*set_wake)(struct uart_port *, unsigned int state);
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 14787de..79e3c90 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -52,6 +52,7 @@
 #include <asm/byteorder.h>
 #include <asm/atomic.h>
 #include <asm/system.h>
+#include <asm/unaligned.h>
 
 static int kgdb_break_asap;
 
@@ -227,8 +228,6 @@
  * GDB remote protocol parser:
  */
 
-static const char	hexchars[] = "0123456789abcdef";
-
 static int hex(char ch)
 {
 	if ((ch >= 'a') && (ch <= 'f'))
@@ -316,8 +315,8 @@
 		}
 
 		kgdb_io_ops->write_char('#');
-		kgdb_io_ops->write_char(hexchars[checksum >> 4]);
-		kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
+		kgdb_io_ops->write_char(hex_asc_hi(checksum));
+		kgdb_io_ops->write_char(hex_asc_lo(checksum));
 		if (kgdb_io_ops->flush)
 			kgdb_io_ops->flush();
 
@@ -478,8 +477,8 @@
 {
 	error = -error;
 	pkt[0] = 'E';
-	pkt[1] = hexchars[(error / 10)];
-	pkt[2] = hexchars[(error % 10)];
+	pkt[1] = hex_asc[(error / 10)];
+	pkt[2] = hex_asc[(error % 10)];
 	pkt[3] = '\0';
 }
 
@@ -510,10 +509,7 @@
 	scan = (unsigned char *)id;
 	while (i--)
 		*scan++ = 0;
-	*scan++ = (value >> 24) & 0xff;
-	*scan++ = (value >> 16) & 0xff;
-	*scan++ = (value >> 8) & 0xff;
-	*scan++ = (value & 0xff);
+	put_unaligned_be32(value, scan);
 }
 
 static struct task_struct *getthread(struct pt_regs *regs, int tid)
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 2de3c46..1479618 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -197,7 +197,7 @@
 		const char *name = vif->dev ? vif->dev->name : "none";
 
 		seq_printf(seq,
-			   "%2Zd %-10s %8ld %7ld  %8ld %7ld %05X\n",
+			   "%2td %-10s %8ld %7ld  %8ld %7ld %05X\n",
 			   vif - vif6_table,
 			   name, vif->bytes_in, vif->pkt_in,
 			   vif->bytes_out, vif->pkt_out,
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index b5c8f92..4a09293 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1881,6 +1881,18 @@
 	final = sbsp->smk_default;
 
 	/*
+	 * If this is the root inode the superblock
+	 * may be in the process of initialization.
+	 * If that is the case use the root value out
+	 * of the superblock.
+	 */
+	if (opt_dentry->d_parent == opt_dentry) {
+		isp->smk_inode = sbsp->smk_root;
+		isp->smk_flags |= SMK_INODE_INSTANT;
+		goto unlockandout;
+	}
+
+	/*
 	 * This is pretty hackish.
 	 * Casey says that we shouldn't have to do
 	 * file system specific code, but it does help