blob: f87bfdfee4ff5adab798167929650f14f978931a [file] [log] [blame]
/*
*
* Bluetooth HCI UART driver for Broadcom devices
*
* Copyright (C) 2015 Intel Corporation
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/tty.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
#include <linux/pm_runtime.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btbcm.h"
#include "hci_uart.h"
#define BCM_LM_DIAG_PKT 0x07
#define BCM_LM_DIAG_SIZE 63
#define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */
struct bcm_device {
struct list_head list;
struct platform_device *pdev;
const char *name;
struct gpio_desc *device_wakeup;
struct gpio_desc *shutdown;
struct clk *clk;
bool clk_enabled;
u32 init_speed;
int irq;
u8 irq_polarity;
#ifdef CONFIG_PM
struct hci_uart *hu;
bool is_suspended; /* suspend/resume flag */
#endif
};
struct bcm_data {
struct sk_buff *rx_skb;
struct sk_buff_head txq;
struct bcm_device *dev;
};
/* List of BCM BT UART devices */
static DEFINE_MUTEX(bcm_device_lock);
static LIST_HEAD(bcm_device_list);
static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
struct bcm_update_uart_baud_rate param;
if (speed > 3000000) {
struct bcm_write_uart_clock_setting clock;
clock.type = BCM_UART_CLOCK_48MHZ;
bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
/* This Broadcom specific command changes the UART's controller
* clock for baud rate > 3000000.
*/
skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: failed to write clock (%d)",
err);
return err;
}
kfree_skb(skb);
}
bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
param.zero = cpu_to_le16(0);
param.baud_rate = cpu_to_le32(speed);
/* This Broadcom specific command changes the UART's controller baud
* rate.
*/
skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
err);
return err;
}
kfree_skb(skb);
return 0;
}
/* bcm_device_exists should be protected by bcm_device_lock */
static bool bcm_device_exists(struct bcm_device *device)
{
struct list_head *p;
list_for_each(p, &bcm_device_list) {
struct bcm_device *dev = list_entry(p, struct bcm_device, list);
if (device == dev)
return true;
}
return false;
}
static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
{
if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
clk_prepare_enable(dev->clk);
gpiod_set_value(dev->shutdown, powered);
gpiod_set_value(dev->device_wakeup, powered);
if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
clk_disable_unprepare(dev->clk);
dev->clk_enabled = powered;
return 0;
}
#ifdef CONFIG_PM
static irqreturn_t bcm_host_wake(int irq, void *data)
{
struct bcm_device *bdev = data;
bt_dev_dbg(bdev, "Host wake IRQ");
pm_runtime_get(&bdev->pdev->dev);
pm_runtime_mark_last_busy(&bdev->pdev->dev);
pm_runtime_put_autosuspend(&bdev->pdev->dev);
return IRQ_HANDLED;
}
static int bcm_request_irq(struct bcm_data *bcm)
{
struct bcm_device *bdev = bcm->dev;
int err = 0;
/* If this is not a platform device, do not enable PM functionalities */
mutex_lock(&bcm_device_lock);
if (!bcm_device_exists(bdev)) {
err = -ENODEV;
goto unlock;
}
if (bdev->irq > 0) {
err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
bcm_host_wake, IRQF_TRIGGER_RISING,
"host_wake", bdev);
if (err)
goto unlock;
device_init_wakeup(&bdev->pdev->dev, true);
pm_runtime_set_autosuspend_delay(&bdev->pdev->dev,
BCM_AUTOSUSPEND_DELAY);
pm_runtime_use_autosuspend(&bdev->pdev->dev);
pm_runtime_set_active(&bdev->pdev->dev);
pm_runtime_enable(&bdev->pdev->dev);
}
unlock:
mutex_unlock(&bcm_device_lock);
return err;
}
static const struct bcm_set_sleep_mode default_sleep_params = {
.sleep_mode = 1, /* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
.idle_host = 2, /* idle threshold HOST, in 300ms */
.idle_dev = 2, /* idle threshold device, in 300ms */
.bt_wake_active = 1, /* BT_WAKE active mode: 1 = high, 0 = low */
.host_wake_active = 0, /* HOST_WAKE active mode: 1 = high, 0 = low */
.allow_host_sleep = 1, /* Allow host sleep in SCO flag */
.combine_modes = 1, /* Combine sleep and LPM flag */
.tristate_control = 0, /* Allow tri-state control of UART tx flag */
/* Irrelevant USB flags */
.usb_auto_sleep = 0,
.usb_resume_timeout = 0,
.pulsed_host_wake = 0,
.break_to_host = 0
};
static int bcm_setup_sleep(struct hci_uart *hu)
{
struct bcm_data *bcm = hu->priv;
struct sk_buff *skb;
struct bcm_set_sleep_mode sleep_params = default_sleep_params;
sleep_params.host_wake_active = !bcm->dev->irq_polarity;
skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
&sleep_params, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
return err;
}
kfree_skb(skb);
bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");
return 0;
}
#else
static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
#endif
static int bcm_set_diag(struct hci_dev *hdev, bool enable)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct bcm_data *bcm = hu->priv;
struct sk_buff *skb;
if (!test_bit(HCI_RUNNING, &hdev->flags))
return -ENETDOWN;
skb = bt_skb_alloc(3, GFP_KERNEL);
if (!skb)
return -ENOMEM;
*skb_put(skb, 1) = BCM_LM_DIAG_PKT;
*skb_put(skb, 1) = 0xf0;
*skb_put(skb, 1) = enable;
skb_queue_tail(&bcm->txq, skb);
hci_uart_tx_wakeup(hu);
return 0;
}
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
struct list_head *p;
bt_dev_dbg(hu->hdev, "hu %p", hu);
bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
if (!bcm)
return -ENOMEM;
skb_queue_head_init(&bcm->txq);
hu->priv = bcm;
if (!hu->tty->dev)
goto out;
mutex_lock(&bcm_device_lock);
list_for_each(p, &bcm_device_list) {
struct bcm_device *dev = list_entry(p, struct bcm_device, list);
/* Retrieve saved bcm_device based on parent of the
* platform device (saved during device probe) and
* parent of tty device used by hci_uart
*/
if (hu->tty->dev->parent == dev->pdev->dev.parent) {
bcm->dev = dev;
hu->init_speed = dev->init_speed;
#ifdef CONFIG_PM
dev->hu = hu;
#endif
bcm_gpio_set_power(bcm->dev, true);
break;
}
}
mutex_unlock(&bcm_device_lock);
out:
return 0;
}
static int bcm_close(struct hci_uart *hu)
{
struct bcm_data *bcm = hu->priv;
struct bcm_device *bdev = bcm->dev;
bt_dev_dbg(hu->hdev, "hu %p", hu);
/* Protect bcm->dev against removal of the device or driver */
mutex_lock(&bcm_device_lock);
if (bcm_device_exists(bdev)) {
bcm_gpio_set_power(bdev, false);
#ifdef CONFIG_PM
pm_runtime_disable(&bdev->pdev->dev);
pm_runtime_set_suspended(&bdev->pdev->dev);
if (device_can_wakeup(&bdev->pdev->dev)) {
devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
device_init_wakeup(&bdev->pdev->dev, false);
}
bdev->hu = NULL;
#endif
}
mutex_unlock(&bcm_device_lock);
skb_queue_purge(&bcm->txq);
kfree_skb(bcm->rx_skb);
kfree(bcm);
hu->priv = NULL;
return 0;
}
static int bcm_flush(struct hci_uart *hu)
{
struct bcm_data *bcm = hu->priv;
bt_dev_dbg(hu->hdev, "hu %p", hu);
skb_queue_purge(&bcm->txq);
return 0;
}
static int bcm_setup(struct hci_uart *hu)
{
struct bcm_data *bcm = hu->priv;
char fw_name[64];
const struct firmware *fw;
unsigned int speed;
int err;
bt_dev_dbg(hu->hdev, "hu %p", hu);
hu->hdev->set_diag = bcm_set_diag;
hu->hdev->set_bdaddr = btbcm_set_bdaddr;
err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
if (err)
return err;
err = request_firmware(&fw, fw_name, &hu->hdev->dev);
if (err < 0) {
bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
return 0;
}
err = btbcm_patchram(hu->hdev, fw);
if (err) {
bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
goto finalize;
}
/* Init speed if any */
if (hu->init_speed)
speed = hu->init_speed;
else if (hu->proto->init_speed)
speed = hu->proto->init_speed;
else
speed = 0;
if (speed)
hci_uart_set_baudrate(hu, speed);
/* Operational speed if any */
if (hu->oper_speed)
speed = hu->oper_speed;
else if (hu->proto->oper_speed)
speed = hu->proto->oper_speed;
else
speed = 0;
if (speed) {
err = bcm_set_baudrate(hu, speed);
if (!err)
hci_uart_set_baudrate(hu, speed);
}
finalize:
release_firmware(fw);
err = btbcm_finalize(hu->hdev);
if (err)
return err;
err = bcm_request_irq(bcm);
if (!err)
err = bcm_setup_sleep(hu);
return err;
}
#define BCM_RECV_LM_DIAG \
.type = BCM_LM_DIAG_PKT, \
.hlen = BCM_LM_DIAG_SIZE, \
.loff = 0, \
.lsize = 0, \
.maxlen = BCM_LM_DIAG_SIZE
static const struct h4_recv_pkt bcm_recv_pkts[] = {
{ H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = hci_recv_frame },
{ BCM_RECV_LM_DIAG, .recv = hci_recv_diag },
};
static int bcm_recv(struct hci_uart *hu, const void *data, int count)
{
struct bcm_data *bcm = hu->priv;
if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
return -EUNATCH;
bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count,
bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
if (IS_ERR(bcm->rx_skb)) {
int err = PTR_ERR(bcm->rx_skb);
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
bcm->rx_skb = NULL;
return err;
} else if (!bcm->rx_skb) {
/* Delay auto-suspend when receiving completed packet */
mutex_lock(&bcm_device_lock);
if (bcm->dev && bcm_device_exists(bcm->dev)) {
pm_runtime_get(&bcm->dev->pdev->dev);
pm_runtime_mark_last_busy(&bcm->dev->pdev->dev);
pm_runtime_put_autosuspend(&bcm->dev->pdev->dev);
}
mutex_unlock(&bcm_device_lock);
}
return count;
}
static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
{
struct bcm_data *bcm = hu->priv;
bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
skb_queue_tail(&bcm->txq, skb);
return 0;
}
static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
{
struct bcm_data *bcm = hu->priv;
struct sk_buff *skb = NULL;
struct bcm_device *bdev = NULL;
mutex_lock(&bcm_device_lock);
if (bcm_device_exists(bcm->dev)) {
bdev = bcm->dev;
pm_runtime_get_sync(&bdev->pdev->dev);
/* Shall be resumed here */
}
skb = skb_dequeue(&bcm->txq);
if (bdev) {
pm_runtime_mark_last_busy(&bdev->pdev->dev);
pm_runtime_put_autosuspend(&bdev->pdev->dev);
}
mutex_unlock(&bcm_device_lock);
return skb;
}
#ifdef CONFIG_PM
static int bcm_suspend_device(struct device *dev)
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
bt_dev_dbg(bdev, "");
if (!bdev->is_suspended && bdev->hu) {
hci_uart_set_flow_control(bdev->hu, true);
/* Once this returns, driver suspends BT via GPIO */
bdev->is_suspended = true;
}
/* Suspend the device */
if (bdev->device_wakeup) {
gpiod_set_value(bdev->device_wakeup, false);
bt_dev_dbg(bdev, "suspend, delaying 15 ms");
mdelay(15);
}
return 0;
}
static int bcm_resume_device(struct device *dev)
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
bt_dev_dbg(bdev, "");
if (bdev->device_wakeup) {
gpiod_set_value(bdev->device_wakeup, true);
bt_dev_dbg(bdev, "resume, delaying 15 ms");
mdelay(15);
}
/* When this executes, the device has woken up already */
if (bdev->is_suspended && bdev->hu) {
bdev->is_suspended = false;
hci_uart_set_flow_control(bdev->hu, false);
}
return 0;
}
#endif
#ifdef CONFIG_PM_SLEEP
/* Platform suspend callback */
static int bcm_suspend(struct device *dev)
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
int error;
bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
/* bcm_suspend can be called at any time as long as platform device is
* bound, so it should use bcm_device_lock to protect access to hci_uart
* and device_wake-up GPIO.
*/
mutex_lock(&bcm_device_lock);
if (!bdev->hu)
goto unlock;
if (pm_runtime_active(dev))
bcm_suspend_device(dev);
if (device_may_wakeup(&bdev->pdev->dev)) {
error = enable_irq_wake(bdev->irq);
if (!error)
bt_dev_dbg(bdev, "BCM irq: enabled");
}
unlock:
mutex_unlock(&bcm_device_lock);
return 0;
}
/* Platform resume callback */
static int bcm_resume(struct device *dev)
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
/* bcm_resume can be called at any time as long as platform device is
* bound, so it should use bcm_device_lock to protect access to hci_uart
* and device_wake-up GPIO.
*/
mutex_lock(&bcm_device_lock);
if (!bdev->hu)
goto unlock;
if (device_may_wakeup(&bdev->pdev->dev)) {
disable_irq_wake(bdev->irq);
bt_dev_dbg(bdev, "BCM irq: disabled");
}
bcm_resume_device(dev);
unlock:
mutex_unlock(&bcm_device_lock);
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
}
#endif
static const struct acpi_gpio_params int_last_device_wakeup_gpios = { 0, 0, false };
static const struct acpi_gpio_params int_last_shutdown_gpios = { 1, 0, false };
static const struct acpi_gpio_params int_last_host_wakeup_gpios = { 2, 0, false };
static const struct acpi_gpio_mapping acpi_bcm_int_last_gpios[] = {
{ "device-wakeup-gpios", &int_last_device_wakeup_gpios, 1 },
{ "shutdown-gpios", &int_last_shutdown_gpios, 1 },
{ "host-wakeup-gpios", &int_last_host_wakeup_gpios, 1 },
{ },
};
static const struct acpi_gpio_params int_first_host_wakeup_gpios = { 0, 0, false };
static const struct acpi_gpio_params int_first_device_wakeup_gpios = { 1, 0, false };
static const struct acpi_gpio_params int_first_shutdown_gpios = { 2, 0, false };
static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
{ "device-wakeup-gpios", &int_first_device_wakeup_gpios, 1 },
{ "shutdown-gpios", &int_first_shutdown_gpios, 1 },
{ "host-wakeup-gpios", &int_first_host_wakeup_gpios, 1 },
{ },
};
#ifdef CONFIG_ACPI
static u8 acpi_active_low = ACPI_ACTIVE_LOW;
/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = {
{
.ident = "Asus T100TA",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR,
"ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
},
.driver_data = &acpi_active_low,
},
{ /* Handle ThinkPad 8 tablets with BCM2E55 chipset ACPI ID */
.ident = "Lenovo ThinkPad 8",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 8"),
},
.driver_data = &acpi_active_low,
},
{ }
};
static int bcm_resource(struct acpi_resource *ares, void *data)
{
struct bcm_device *dev = data;
struct acpi_resource_extended_irq *irq;
struct acpi_resource_gpio *gpio;
struct acpi_resource_uart_serialbus *sb;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
irq = &ares->data.extended_irq;
dev->irq_polarity = irq->polarity;
break;
case ACPI_RESOURCE_TYPE_GPIO:
gpio = &ares->data.gpio;
if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
dev->irq_polarity = gpio->polarity;
break;
case ACPI_RESOURCE_TYPE_SERIAL_BUS:
sb = &ares->data.uart_serial_bus;
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
dev->init_speed = sb->default_baud_rate;
break;
default:
break;
}
/* Always tell the ACPI core to skip this resource */
return 1;
}
#endif /* CONFIG_ACPI */
static int bcm_platform_probe(struct bcm_device *dev)
{
struct platform_device *pdev = dev->pdev;
dev->name = dev_name(&pdev->dev);
dev->clk = devm_clk_get(&pdev->dev, NULL);
dev->device_wakeup = devm_gpiod_get_optional(&pdev->dev,
"device-wakeup",
GPIOD_OUT_LOW);
if (IS_ERR(dev->device_wakeup))
return PTR_ERR(dev->device_wakeup);
dev->shutdown = devm_gpiod_get_optional(&pdev->dev, "shutdown",
GPIOD_OUT_LOW);
if (IS_ERR(dev->shutdown))
return PTR_ERR(dev->shutdown);
/* IRQ can be declared in ACPI table as Interrupt or GpioInt */
dev->irq = platform_get_irq(pdev, 0);
if (dev->irq <= 0) {
struct gpio_desc *gpio;
gpio = devm_gpiod_get_optional(&pdev->dev, "host-wakeup",
GPIOD_IN);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
dev->irq = gpiod_to_irq(gpio);
}
dev_info(&pdev->dev, "BCM irq: %d\n", dev->irq);
/* Make sure at-least one of the GPIO is defined and that
* a name is specified for this instance
*/
if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
return 0;
}
#ifdef CONFIG_ACPI
static int bcm_acpi_probe(struct bcm_device *dev)
{
struct platform_device *pdev = dev->pdev;
LIST_HEAD(resources);
const struct dmi_system_id *dmi_id;
const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
const struct acpi_device_id *id;
int ret;
/* Retrieve GPIO data */
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (id)
gpio_mapping = (const struct acpi_gpio_mapping *) id->driver_data;
ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
gpio_mapping);
if (ret)
return ret;
ret = bcm_platform_probe(dev);
if (ret)
return ret;
/* Retrieve UART ACPI info */
ret = acpi_dev_get_resources(ACPI_COMPANION(&dev->pdev->dev),
&resources, bcm_resource, dev);
if (ret < 0)
return ret;
acpi_dev_free_resource_list(&resources);
dmi_id = dmi_first_match(bcm_wrong_irq_dmi_table);
if (dmi_id) {
bt_dev_warn(dev, "%s: Overwriting IRQ polarity to active low",
dmi_id->ident);
dev->irq_polarity = *(u8 *)dmi_id->driver_data;
}
return 0;
}
#else
static int bcm_acpi_probe(struct bcm_device *dev)
{
return -EINVAL;
}
#endif /* CONFIG_ACPI */
static int bcm_probe(struct platform_device *pdev)
{
struct bcm_device *dev;
int ret;
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->pdev = pdev;
if (has_acpi_companion(&pdev->dev))
ret = bcm_acpi_probe(dev);
else
ret = bcm_platform_probe(dev);
if (ret)
return ret;
platform_set_drvdata(pdev, dev);
dev_info(&pdev->dev, "%s device registered.\n", dev->name);
/* Place this instance on the device list */
mutex_lock(&bcm_device_lock);
list_add_tail(&dev->list, &bcm_device_list);
mutex_unlock(&bcm_device_lock);
bcm_gpio_set_power(dev, false);
return 0;
}
static int bcm_remove(struct platform_device *pdev)
{
struct bcm_device *dev = platform_get_drvdata(pdev);
mutex_lock(&bcm_device_lock);
list_del(&dev->list);
mutex_unlock(&bcm_device_lock);
acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
return 0;
}
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "Broadcom",
.manufacturer = 15,
.init_speed = 115200,
.oper_speed = 4000000,
.open = bcm_open,
.close = bcm_close,
.flush = bcm_flush,
.setup = bcm_setup,
.set_baudrate = bcm_set_baudrate,
.recv = bcm_recv,
.enqueue = bcm_enqueue,
.dequeue = bcm_dequeue,
};
#ifdef CONFIG_ACPI
static const struct acpi_device_id bcm_acpi_match[] = {
{ "BCM2E1A", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E39", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E3A", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E3D", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E3F", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E40", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E54", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E55", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E64", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E65", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E67", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
{ "BCM2E95", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
{ "BCM2E96", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
{ },
};
MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
#endif
/* Platform suspend and resume callbacks */
static const struct dev_pm_ops bcm_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
};
static struct platform_driver bcm_driver = {
.probe = bcm_probe,
.remove = bcm_remove,
.driver = {
.name = "hci_bcm",
.acpi_match_table = ACPI_PTR(bcm_acpi_match),
.pm = &bcm_pm_ops,
},
};
int __init bcm_init(void)
{
platform_driver_register(&bcm_driver);
return hci_uart_register_proto(&bcm_proto);
}
int __exit bcm_deinit(void)
{
platform_driver_unregister(&bcm_driver);
return hci_uart_unregister_proto(&bcm_proto);
}