/*
 * Copyright © 2015 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 *
 */

#include "intel_drv.h"

static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
{
	uint8_t reg_val = 0;

	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
			      &reg_val) < 0) {
		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
			      DP_EDP_DISPLAY_CONTROL_REGISTER);
		return;
	}
	if (enable)
		reg_val |= DP_EDP_BACKLIGHT_ENABLE;
	else
		reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);

	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
			       reg_val) != 1) {
		DRM_DEBUG_KMS("Failed to %s aux backlight\n",
			      enable ? "enable" : "disable");
	}
}

/*
 * Read the current backlight value from DPCD register(s) based
 * on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported
 */
static uint32_t intel_dp_aux_get_backlight(struct intel_connector *connector)
{
	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
	uint8_t read_val[2] = { 0x0 };
	uint16_t level = 0;

	if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
			     &read_val, sizeof(read_val)) < 0) {
		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
			      DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
		return 0;
	}
	level = read_val[0];
	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
		level = (read_val[0] << 8 | read_val[1]);

	return level;
}

/*
 * Sends the current backlight level over the aux channel, checking if its using
 * 8-bit or 16 bit value (MSB and LSB)
 */
static void
intel_dp_aux_set_backlight(struct intel_connector *connector, u32 level)
{
	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
	uint8_t vals[2] = { 0x0 };

	vals[0] = level;

	/* Write the MSB and/or LSB */
	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) {
		vals[0] = (level & 0xFF00) >> 8;
		vals[1] = (level & 0xFF);
	}
	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
			      vals, sizeof(vals)) < 0) {
		DRM_DEBUG_KMS("Failed to write aux backlight level\n");
		return;
	}
}

static void intel_dp_aux_enable_backlight(struct intel_connector *connector)
{
	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
	uint8_t dpcd_buf = 0;

	set_aux_backlight_enable(intel_dp, true);

	if ((drm_dp_dpcd_readb(&intel_dp->aux,
			       DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) == 1) &&
	    ((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) ==
	     DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET))
		drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
				   (dpcd_buf | DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD));
}

static void intel_dp_aux_disable_backlight(struct intel_connector *connector)
{
	set_aux_backlight_enable(enc_to_intel_dp(&connector->encoder->base), false);
}

static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
					enum pipe pipe)
{
	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
	struct intel_panel *panel = &connector->panel;

	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
		panel->backlight.max = 0xFFFF;
	else
		panel->backlight.max = 0xFF;

	panel->backlight.min = 0;
	panel->backlight.level = intel_dp_aux_get_backlight(connector);

	panel->backlight.enabled = panel->backlight.level != 0;

	return 0;
}

static bool
intel_dp_aux_display_control_capable(struct intel_connector *connector)
{
	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);

	/* Check the  eDP Display control capabilities registers to determine if
	 * the panel can support backlight control over the aux channel
	 */
	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
	    (intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) &&
	    !((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP) ||
	      (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))) {
		DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
		return true;
	}
	return false;
}

int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
{
	struct intel_panel *panel = &intel_connector->panel;

	if (!i915.enable_dpcd_backlight)
		return -ENODEV;

	if (!intel_dp_aux_display_control_capable(intel_connector))
		return -ENODEV;

	panel->backlight.setup = intel_dp_aux_setup_backlight;
	panel->backlight.enable = intel_dp_aux_enable_backlight;
	panel->backlight.disable = intel_dp_aux_disable_backlight;
	panel->backlight.set = intel_dp_aux_set_backlight;
	panel->backlight.get = intel_dp_aux_get_backlight;

	return 0;
}