PCI: remove useless pci driver method
Remove pointless and never-called enable_wake() hook from pci_driver and
from documentation. Evidently this was introduced in the 2.4.6 kernel,
but there's no evidence it was ever called; and it was rarely implemented.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index d38261b..7d3da30 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -113,9 +113,6 @@
(Please see Documentation/power/pci.txt for descriptions
of PCI Power Management and the related functions.)
- enable_wake Enable device to generate wake events from a low power
- state.
-
shutdown Hook into reboot_notifier_list (kernel/sys.c).
Intended to stop any idling DMA operations.
Useful for enabling wake-on-lan (NIC) or changing
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index e00b099..dd8fe43 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -164,7 +164,6 @@
int (*suspend) (struct pci_dev *dev, pm_message_t state);
int (*resume) (struct pci_dev *dev);
- int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable);
suspend
@@ -251,42 +250,6 @@
this function, except for PM-capable devices when pci_set_power_state is used.
-enable_wake
------------
-
-Usage:
-
-if (dev->driver && dev->driver->enable_wake)
- dev->driver->enable_wake(dev,state,enable);
-
-This callback is generally only relevant for devices that support the PCI PM
-spec and have the ability to generate a PME# (Power Management Event Signal)
-to wake the system up. (However, it is possible that a device may support
-some non-standard way of generating a wake event on sleep.)
-
-Bits 15:11 of the PMC (Power Mgmt Capabilities) Register in a device's
-PM Capabilities describe what power states the device supports generating a
-wake event from:
-
-+------------------+
-| Bit | State |
-+------------------+
-| 11 | D0 |
-| 12 | D1 |
-| 13 | D2 |
-| 14 | D3hot |
-| 15 | D3cold |
-+------------------+
-
-A device can use this to enable wake events:
-
- pci_enable_wake(dev,state,enable);
-
-Note that to enable PME# from D3cold, a value of 4 should be passed to
-pci_enable_wake (since it uses an index into a bitmask). If a driver gets
-a request to enable wake events from D3, two calls should be made to
-pci_enable_wake (one for both D3hot and D3cold).
-
A reference implementation
-------------------------
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 15b2fb8..0f2c061 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -2267,12 +2267,6 @@
typhoon_resume(pdev);
return -EBUSY;
}
-
-static int
-typhoon_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
- return pci_enable_wake(pdev, state, enable);
-}
#endif
static int __devinit
@@ -2636,7 +2630,6 @@
#ifdef CONFIG_PM
.suspend = typhoon_suspend,
.resume = typhoon_resume,
- .enable_wake = typhoon_enable_wake,
#endif
};
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index 0cd48d1..7da3664 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -453,8 +453,6 @@
.suspend = prism2_pci_suspend,
.resume = prism2_pci_resume,
#endif /* CONFIG_PM */
- /* Linux 2.4.6 added save_state and enable_wake that are not used here
- */
};
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 0183df7..040dc3e 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -613,9 +613,6 @@
.id_table = prism2_plx_id_table,
.probe = prism2_plx_probe,
.remove = prism2_plx_remove,
- .suspend = NULL,
- .resume = NULL,
- .enable_wake = NULL
};
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index 3dcb13b..25d6c80 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -87,7 +87,6 @@
.remove = prism54_remove,
.suspend = prism54_suspend,
.resume = prism54_resume,
- /* .enable_wake ; we don't support this yet */
};
/******************************************************************************
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index f6f561d..3e9765f 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -3487,15 +3487,6 @@
return 0;
}
-/* Enable wake event */
-static int nsp32_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
-
- nsp32_msg(KERN_INFO, "pci-enable_wake: stub, pdev=0x%p, enable=%d, slot=%s, host=0x%p", pdev, enable, pci_name(pdev), host);
-
- return 0;
-}
#endif
/************************************************************************
@@ -3571,7 +3562,6 @@
#ifdef CONFIG_PM
.suspend = nsp32_suspend,
.resume = nsp32_resume,
- .enable_wake = nsp32_enable_wake,
#endif
};
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 4db7b5a..5be420a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -371,7 +371,6 @@
int (*suspend_late) (struct pci_dev *dev, pm_message_t state);
int (*resume_early) (struct pci_dev *dev);
int (*resume) (struct pci_dev *dev); /* Device woken up */
- int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); /* Enable wake event */
void (*shutdown) (struct pci_dev *dev);
struct pci_error_handlers *err_handler;
