blob: 5be552e255e9859f89f66f0302626dcd2d906652 [file] [log] [blame]
USB Type-C port devices (eg. /sys/class/typec/port0/)
What: /sys/class/typec/<port>/data_role
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
The supported USB data roles. This attribute can be used for
requesting data role swapping on the port. Swapping is supported
as synchronous operation, so write(2) to the attribute will not
return until the operation has finished. The attribute is
notified about role changes so that poll(2) on the attribute
wakes up. Change on the role will also generate uevent
KOBJ_CHANGE on the port. The current role is show in brackets,
for example "[host] device" when DRP port is in host mode.
Valid values: host, device
What: /sys/class/typec/<port>/power_role
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
The supported power roles. This attribute can be used to request
power role swap on the port when the port supports USB Power
Delivery. Swapping is supported as synchronous operation, so
write(2) to the attribute will not return until the operation
has finished. The attribute is notified about role changes so
that poll(2) on the attribute wakes up. Change on the role will
also generate uevent KOBJ_CHANGE. The current role is show in
brackets, for example "[source] sink" when in source mode.
Valid values: source, sink
What: /sys/class/typec/<port>/port_type
Date: May 2017
Contact: Badhri Jagan Sridharan <Badhri@google.com>
Description:
Indicates the type of the port. This attribute can be used for
requesting a change in the port type. Port type change is
supported as a synchronous operation, so write(2) to the
attribute will not return until the operation has finished.
Valid values:
- source (The port will behave as source only DFP port)
- sink (The port will behave as sink only UFP port)
- dual (The port will behave as dual-role-data and
dual-role-power port)
What: /sys/class/typec/<port>/vconn_source
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows is the port VCONN Source. This attribute can be used to
request VCONN swap to change the VCONN Source during connection
when both the port and the partner support USB Power Delivery.
Swapping is supported as synchronous operation, so write(2) to
the attribute will not return until the operation has finished.
The attribute is notified about VCONN source changes so that
poll(2) on the attribute wakes up. Change on VCONN source also
generates uevent KOBJ_CHANGE.
Valid values:
- "no" when the port is not the VCONN Source
- "yes" when the port is the VCONN Source
What: /sys/class/typec/<port>/power_operation_mode
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows the current power operational mode the port is in. The
power operation mode means current level for VBUS. In case USB
Power Delivery communication is used for negotiating the levels,
power operation mode should show "usb_power_delivery".
Valid values:
- default
- 1.5A
- 3.0A
- usb_power_delivery
What: /sys/class/typec/<port>/preferred_role
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
The user space can notify the driver about the preferred role.
It should be handled as enabling of Try.SRC or Try.SNK, as
defined in USB Type-C specification, in the port drivers. By
default the preferred role should come from the platform.
Valid values: source, sink, none (to remove preference)
What: /sys/class/typec/<port>/supported_accessory_modes
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Space separated list of accessory modes, defined in the USB
Type-C specification, the port supports.
What: /sys/class/typec/<port>/usb_power_delivery_revision
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Revision number of the supported USB Power Delivery
specification, or 0 when USB Power Delivery is not supported.
What: /sys/class/typec/<port>/usb_typec_revision
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Revision number of the supported USB Type-C specification.
USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
What: /sys/class/typec/<port>-partner/accessory_mode
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows the Accessory Mode name when the partner is an Accessory.
The Accessory Modes are defined in USB Type-C Specification.
What: /sys/class/typec/<port>-partner/supports_usb_power_delivery
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows if the partner supports USB Power Delivery communication:
Valid values: yes, no
What: /sys/class/typec/<port>-partner>/identity/
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
This directory appears only if the port device driver is capable
of showing the result of Discover Identity USB power delivery
command. That will not always be possible even when USB power
delivery is supported, for example when USB power delivery
communication for the port is mostly handled in firmware. If the
directory exists, it will have an attribute file for every VDO
in Discover Identity command result.
What: /sys/class/typec/<port>-partner/identity/id_header
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
ID Header VDO part of Discover Identity command result. The
value will show 0 until Discover Identity command result becomes
available. The value can be polled.
What: /sys/class/typec/<port>-partner/identity/cert_stat
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Cert Stat VDO part of Discover Identity command result. The
value will show 0 until Discover Identity command result becomes
available. The value can be polled.
What: /sys/class/typec/<port>-partner/identity/product
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Product VDO part of Discover Identity command result. The value
will show 0 until Discover Identity command result becomes
available. The value can be polled.
USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
Note: Electronically Marked Cables will have a device also for one cable plug
(eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP
Double Prime controller (USB Power Deliver specification ch. 2.4) it will have
second device also for the other plug. Both plugs may have alternate modes as
described in USB Type-C and USB Power Delivery specifications.
What: /sys/class/typec/<port>-cable/type
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows if the cable is active.
Valid values: active, passive
What: /sys/class/typec/<port>-cable/plug_type
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows type of the plug on the cable:
- type-a - Standard A
- type-b - Standard B
- type-c
- captive
What: /sys/class/typec/<port>-cable/identity/
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
This directory appears only if the port device driver is capable
of showing the result of Discover Identity USB power delivery
command. That will not always be possible even when USB power
delivery is supported. If the directory exists, it will have an
attribute for every VDO returned by Discover Identity command.
What: /sys/class/typec/<port>-cable/identity/id_header
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
ID Header VDO part of Discover Identity command result. The
value will show 0 until Discover Identity command result becomes
available. The value can be polled.
What: /sys/class/typec/<port>-cable/identity/cert_stat
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Cert Stat VDO part of Discover Identity command result. The
value will show 0 until Discover Identity command result becomes
available. The value can be polled.
What: /sys/class/typec/<port>-cable/identity/product
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Product VDO part of Discover Identity command result. The value
will show 0 until Discover Identity command result becomes
available. The value can be polled.
Alternate Mode devices.
The alternate modes will have Standard or Vendor ID (SVID) assigned by USB-IF.
The ports, partners and cable plugs can have alternate modes. A supported SVID
will consist of a set of modes. Every SVID a port/partner/plug supports will
have a device created for it, and every supported mode for a supported SVID will
have its own directory under that device. Below <dev> refers to the device for
the alternate mode.
What: /sys/class/typec/<port|partner|cable>/<dev>/svid
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
The SVID (Standard or Vendor ID) assigned by USB-IF for this
alternate mode.
What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Every supported mode will have its own directory. The name of
a mode will be "mode<index>" (for example mode1), where <index>
is the actual index to the mode VDO returned by Discover Modes
USB power delivery command.
What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/description
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows description of the mode. The description is optional for
the drivers, just like with the Billboard Devices.
What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/vdo
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows the VDO in hexadecimal returned by Discover Modes command
for this mode.
What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/active
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows if the mode is active or not. The attribute can be used
for entering/exiting the mode with partners and cable plugs, and
with the port alternate modes it can be used for disabling
support for specific alternate modes. Entering/exiting modes is
supported as synchronous operation so write(2) to the attribute
does not return until the enter/exit mode operation has
finished. The attribute is notified when the mode is
entered/exited so poll(2) on the attribute wakes up.
Entering/exiting a mode will also generate uevent KOBJ_CHANGE.
Valid values: yes, no
What: /sys/class/typec/<port>/<dev>/mode<index>/supported_roles
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Space separated list of the supported roles.
This attribute is available for the devices describing the
alternate modes a port supports, and it will not be exposed with
the devices presenting the alternate modes the partners or cable
plugs support.
Valid values: source, sink