diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 65bbd26..a1a6432 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -7,8 +7,8 @@
 
 Following translations are available on the WWW:
 
-   - Japanese, maintained by the JF Project (JF@linux.or.jp), at
-     http://www.linux.or.jp/JF/
+   - Japanese, maintained by the JF Project (jf@listserv.linux.or.jp), at
+     http://linuxjf.sourceforge.jp/
 
 00-INDEX
 	- this file.
diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill
index 4201d5b..ff60ad9 100644
--- a/Documentation/ABI/obsolete/sysfs-class-rfkill
+++ b/Documentation/ABI/obsolete/sysfs-class-rfkill
@@ -7,7 +7,7 @@
 KernelVersion	v2.6.22
 Contact:	linux-wireless@vger.kernel.org
 Description: 	Current state of the transmitter.
-		This file is deprecated and sheduled to be removed in 2014,
+		This file is deprecated and scheduled to be removed in 2014,
 		because its not possible to express the 'soft and hard block'
 		state of the rfkill driver.
 Values: 	A numeric value.
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
index 75be431..a0dd21c 100644
--- a/Documentation/ABI/stable/sysfs-module
+++ b/Documentation/ABI/stable/sysfs-module
@@ -6,7 +6,7 @@
 		The name of the module that is in the kernel.  This
 		module name will show up either if the module is built
 		directly into the kernel, or if it is loaded as a
-		dyanmic module.
+		dynamic module.
 
 	/sys/module/MODULENAME/parameters
 		This directory contains individual files that are each
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index f51f285..3fca32c 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -387,7 +387,7 @@
      <title>See also</title>
 	<para>
 	  <citation>
-	   <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
+	   <ulink url="http://kernel.org/pub/linux/kernel/people/sct/ext3/journal-design.ps.gz">
 	   	Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie
 	   </ulink>
 	  </citation>
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index cdd1bb9..31df1aa 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -22,8 +22,8 @@
    <para>
    The contents of this file are subject to the Open
    Software License version 1.1 that can be found at
-   <ulink url="http://www.opensource.org/licenses/osl-1.1.txt">http://www.opensource.org/licenses/osl-1.1.txt</ulink> and is included herein
-   by reference.
+   <ulink url="http://fedoraproject.org/wiki/Licensing:OSL1.1">http://fedoraproject.org/wiki/Licensing:OSL1.1</ulink>
+   and is included herein by reference.
    </para>
 
    <para>
@@ -945,7 +945,7 @@
 
         <listitem>
 	<para>
-	!BSY &amp;&amp; ERR after CDB tranfer starts but before the
+	!BSY &amp;&amp; ERR after CDB transfer starts but before the
         last byte of CDB is transferred.  ATA/ATAPI standard states
         that &quot;The device shall not terminate the PACKET command
         with an error before the last byte of the command packet has
@@ -1050,7 +1050,7 @@
 	   to complete a command.  Combined with the fact that MWDMA
 	   and PIO transfer errors aren't allowed to use ICRC bit up to
 	   ATA/ATAPI-7, it seems to imply that ABRT bit alone could
-	   indicate tranfer errors.
+	   indicate transfer errors.
 	   </para>
 	   <para>
 	   However, ATA/ATAPI-8 draft revision 1f removes the part
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index c736380..a2485b3 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -444,7 +444,7 @@
 		<entry><para><link
 linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote>
 		      <para>Presumably all V4L RGB formats are
-little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue
+little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue
 swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para>
 		    </footnote></para></entry>
 	      </row>
@@ -823,7 +823,7 @@
 		<row>
 		  <entry>sample_format</entry>
 		  <entry>V4L2_PIX_FMT_GREY. The last four bytes (a
-machine endianess integer) contain a frame counter.</entry>
+machine endianness integer) contain a frame counter.</entry>
 		</row>
 		<row>
 		  <entry>start[]</entry>
diff --git a/Documentation/arm/kernel_user_helpers.txt b/Documentation/arm/kernel_user_helpers.txt
index a17df9f..5673594 100644
--- a/Documentation/arm/kernel_user_helpers.txt
+++ b/Documentation/arm/kernel_user_helpers.txt
@@ -25,7 +25,7 @@
 the implementation of a library call) when optimizing for a recent enough
 processor that has the necessary native support, but only if resulting
 binaries are already to be incompatible with earlier ARM processors due to
-useage of similar native instructions for other things.  In other words
+usage of similar native instructions for other things.  In other words
 don't make binaries unable to run on earlier processors just for the sake
 of not using these kernel helpers if your compiled code is not going to
 use new instructions for other purpose.
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
index 84f0a15..b4b1fb3 100644
--- a/Documentation/cgroups/blkio-controller.txt
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -94,11 +94,11 @@
 
 Hierarchical Cgroups
 ====================
-- Currently none of the IO control policy supports hierarhical groups. But
-  cgroup interface does allow creation of hierarhical cgroups and internally
+- Currently none of the IO control policy supports hierarchical groups. But
+  cgroup interface does allow creation of hierarchical cgroups and internally
   IO policies treat them as flat hierarchy.
 
-  So this patch will allow creation of cgroup hierarhcy but at the backend
+  So this patch will allow creation of cgroup hierarchcy but at the backend
   everything will be treated as flat. So if somebody created a hierarchy like
   as follows.
 
@@ -266,7 +266,7 @@
 - blkio.idle_time
 	- Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
 	  This is the amount of time spent by the IO scheduler idling for a
-	  given cgroup in anticipation of a better request than the exising ones
+	  given cgroup in anticipation of a better request than the existing ones
 	  from other queues/cgroups. This is in nanoseconds. If this is read
 	  when the cgroup is in an idling state, the stat will only report the
 	  idle_time accumulated till the last idle period and will not include
@@ -283,34 +283,34 @@
 -----------------------------------
 - blkio.throttle.read_bps_device
 	- Specifies upper limit on READ rate from the device. IO rate is
-	  specified in bytes per second. Rules are per deivce. Following is
+	  specified in bytes per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
-	  specified in bytes per second. Rules are per deivce. Following is
+	  specified in bytes per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
-	  specified in IO per second. Rules are per deivce. Following is
+	  specified in IO per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
-	  specified in io per second. Rules are per deivce. Following is
+	  specified in io per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
-      subjectd to both the constraints.
+      subjected to both the constraints.
 
 - blkio.throttle.io_serviced
 	- Number of IOs (bio) completed to/from the disk by the group (as
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 2a8c113..946c733 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -28,7 +28,7 @@
   raid6_nc	RAID6 N continue
 		- rotating parity N (right-to-left) with data continuation
 
-  Refererence: Chapter 4 of
+  Reference: Chapter 4 of
   http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
 
 <#raid_params>: The number of parameters that follow.
diff --git a/Documentation/device-mapper/persistent-data.txt b/Documentation/device-mapper/persistent-data.txt
index 0e5df9b..a333bcb 100644
--- a/Documentation/device-mapper/persistent-data.txt
+++ b/Documentation/device-mapper/persistent-data.txt
@@ -3,7 +3,7 @@
 
 The more-sophisticated device-mapper targets require complex metadata
 that is managed in kernel.  In late 2010 we were seeing that various
-different targets were rolling their own data strutures, for example:
+different targets were rolling their own data structures, for example:
 
 - Mikulas Patocka's multisnap implementation
 - Heinz Mauelshagen's thin provisioning target
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 801d9d1..1ff044d 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -1,7 +1,7 @@
 Introduction
 ============
 
-This document descibes a collection of device-mapper targets that
+This document describes a collection of device-mapper targets that
 between them implement thin-provisioning and snapshots.
 
 The main highlight of this implementation, compared to the previous
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index dbdab40..edc618a 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -5,7 +5,7 @@
 On top of that an omap_device is created to extend the platform_device
 capabilities and to allow binding with one or several hwmods.
 The hwmods will contain all the information to build the device:
-adresse range, irq lines, dma lines, interconnect, PRCM register,
+address range, irq lines, dma lines, interconnect, PRCM register,
 clock domain, input clocks.
 For the moment just point to the existing hwmod, the next step will be
 to move data from hwmod to device-tree representation.
diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt
index 6b07f65..1881e1c 100644
--- a/Documentation/devicetree/bindings/arm/sirf.txt
+++ b/Documentation/devicetree/bindings/arm/sirf.txt
@@ -1,3 +1,3 @@
-prima2 "cb" evalutation board
+prima2 "cb" evaluation board
 Required root node properties:
     - compatible = "sirf,prima2-cb", "sirf,prima2";
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 7c1329d..da0bfeb 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -169,7 +169,7 @@
 
         b) Entry with a flattened device-tree block.  Firmware loads the
         physical address of the flattened device tree block (dtb) into r2,
-        r1 is not used, but it is considered good practise to use a valid
+        r1 is not used, but it is considered good practice to use a valid
         machine number as described in Documentation/arm/Booting.
 
                 r0 : 0
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index bbe6cb3..879b6e3 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -63,7 +63,7 @@
 				  struct dma_slave_config *config)
 
    Please see the dma_slave_config structure definition in dmaengine.h
-   for a detailed explaination of the struct members.  Please note
+   for a detailed explanation of the struct members.  Please note
    that the 'direction' member will be going away as it duplicates the
    direction given in the prepare call.
 
diff --git a/Documentation/fb/matroxfb.txt b/Documentation/fb/matroxfb.txt
index e5ce8a1..b95f5bb 100644
--- a/Documentation/fb/matroxfb.txt
+++ b/Documentation/fb/matroxfb.txt
@@ -177,8 +177,8 @@
            effect without `init'.
 sdram    - tells to driver that you have Gxx0 with SDRAM memory.
            It is a default.
-inv24    - change timings parameters for 24bpp modes on Millenium and
-           Millenium II. Specify this if you see strange color shadows around
+inv24    - change timings parameters for 24bpp modes on Millennium and
+           Millennium II. Specify this if you see strange color shadows around
 	   characters.
 noinv24  - use standard timings. It is the default.
 inverse  - invert colors on screen (for LCD displays)
@@ -204,9 +204,9 @@
 	    can paint colors.
 nograyscale - disable grayscale summing. It is default.
 cross4MB - enables that pixel line can cross 4MB boundary. It is default for
-           non-Millenium.
+           non-Millennium.
 nocross4MB - pixel line must not cross 4MB boundary. It is default for
-             Millenium I or II, because of these devices have hardware
+             Millennium I or II, because of these devices have hardware
 	     limitations which do not allow this. But this option is
 	     incompatible with some (if not all yet released) versions of
 	     XF86_FBDev.
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 10ec4639..8c10bf3 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -308,7 +308,7 @@
 			fast disks, at the cost of increasing latency.
 
 journal_ioprio=prio	The I/O priority (from 0 to 7, where 0 is the
-			highest priorty) which should be used for I/O
+			highest priority) which should be used for I/O
 			operations submitted by kjournald2 during a
 			commit operation.  This defaults to 3, which is
 			a slightly higher priority than the default I/O
@@ -343,7 +343,7 @@
 init_itable=n		The lazy itable init code will wait n times the
 			number of milliseconds it took to zero out the
 			previous block group's inode table.  This
-			minimizes the impact on the systme performance
+			minimizes the impact on the system performance
 			while file system's inode table is being initialized.
 
 discard			Controls whether ext4 should issue discard/TRIM
diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt
index d818896..19a19eb 100644
--- a/Documentation/filesystems/gfs2-uevents.txt
+++ b/Documentation/filesystems/gfs2-uevents.txt
@@ -62,7 +62,7 @@
 
 The REMOVE uevent is generated at the end of an unsuccessful mount
 or at the end of a umount of the filesystem. All REMOVE uevents will
-have been preceded by at least an ADD uevent for the same fileystem,
+have been preceded by at least an ADD uevent for the same filesystem,
 and unlike the other uevents is generated automatically by the kernel's
 kobject subsystem.
 
diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt
index 65e03dd..c680b4b 100644
--- a/Documentation/filesystems/pohmelfs/network_protocol.txt
+++ b/Documentation/filesystems/pohmelfs/network_protocol.txt
@@ -20,7 +20,7 @@
 so one can extend protocol as needed without breaking backward compatibility as long
 as old commands are supported. All string lengths include tail 0 byte.
 
-All commands are transferred over the network in big-endian. CPU endianess is used at the end peers.
+All commands are transferred over the network in big-endian. CPU endianness is used at the end peers.
 
 @cmd - command number, which specifies command to be processed. Following
 	commands are used currently:
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
index a8273d5..59b4a096 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -297,7 +297,7 @@
    either way about the archive format, and there are alternative tools,
    such as:
 
-     http://freshmeat.net/projects/afio/
+     http://freecode.com/projects/afio
 
 2) The cpio archive format chosen by the kernel is simpler and cleaner (and
    thus easier to create and parse) than any of the (literally dozens of)
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 3d9393b..e916e3d 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -993,7 +993,7 @@
 
 	If the 'rcu_walk' parameter is true, then the caller is doing a
 	pathwalk in RCU-walk mode.  Sleeping is not permitted in this mode,
-	and the caller can be asked to leave it and call again by returing
+	and the caller can be asked to leave it and call again by returning
 	-ECHILD.
 
 	This function is only used if DCACHE_MANAGE_TRANSIT is set on the
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index ab70d96..e5f982c 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -53,7 +53,7 @@
 in1_label		"vin1" or "vout1" depending on chip variant and
 			configuration.
 in1_input		Measured voltage.
-in1_min			Minumum Voltage.
+in1_min			Minimum Voltage.
 in1_max			Maximum voltage.
 in1_min_alarm		Voltage low alarm.
 in1_max_alarm		Voltage high alarm.
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064
index f6e8bcb..f8b4780 100644
--- a/Documentation/hwmon/max16064
+++ b/Documentation/hwmon/max16064
@@ -42,9 +42,9 @@
 
 in[1-4]_label		"vout[1-4]"
 in[1-4]_input		Measured voltage. From READ_VOUT register.
-in[1-4]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[1-4]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-4]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[1-4]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[1-4]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-4]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 8ab5153..1974391 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -48,9 +48,9 @@
 
 in[1-6]_label		"vout[1-6]".
 in[1-6]_input		Measured voltage. From READ_VOUT register.
-in[1-6]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[1-6]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-6]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[1-6]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[1-6]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-6]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
index 71ed10a..fe84987 100644
--- a/Documentation/hwmon/max8688
+++ b/Documentation/hwmon/max8688
@@ -42,9 +42,9 @@
 
 in1_label		"vout1"
 in1_input		Measured voltage. From READ_VOUT register.
-in1_min			Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_min			Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in1_max			Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in1_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in1_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in1_min_alarm		Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in1_max_alarm		Voltage high alarm. From VOLTAGE_OV_WARNING status.
diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000
index 40ca6db..0df5f27 100644
--- a/Documentation/hwmon/ucd9000
+++ b/Documentation/hwmon/ucd9000
@@ -70,9 +70,9 @@
 
 in[1-12]_label		"vout[1-12]".
 in[1-12]_input		Measured voltage. From READ_VOUT register.
-in[1-12]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-12]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[1-12]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-12]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-12]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[1-12]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[1-12]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-12]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
@@ -82,7 +82,7 @@
 curr[1-12]_label	"iout[1-12]".
 curr[1-12]_input	Measured current. From READ_IOUT register.
 curr[1-12]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
-curr[1-12]_lcrit	Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+curr[1-12]_lcrit	Critical minimum output current. From IOUT_UC_FAULT_LIMIT
 			register.
 curr[1-12]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
 curr[1-12]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200
index 3c58607..fd7d07b 100644
--- a/Documentation/hwmon/ucd9200
+++ b/Documentation/hwmon/ucd9200
@@ -54,9 +54,9 @@
 
 in1_label		"vin".
 in1_input		Measured voltage. From READ_VIN register.
-in1_min			Minumum Voltage. From VIN_UV_WARN_LIMIT register.
+in1_min			Minimum Voltage. From VIN_UV_WARN_LIMIT register.
 in1_max			Maximum voltage. From VIN_OV_WARN_LIMIT register.
-in1_lcrit		Critical minumum Voltage. VIN_UV_FAULT_LIMIT register.
+in1_lcrit		Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
 in1_crit		Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
 in1_min_alarm		Voltage low alarm. From VIN_UV_WARNING status.
 in1_max_alarm		Voltage high alarm. From VIN_OV_WARNING status.
@@ -65,9 +65,9 @@
 
 in[2-5]_label		"vout[1-4]".
 in[2-5]_input		Measured voltage. From READ_VOUT register.
-in[2-5]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[2-5]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[2-5]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[2-5]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[2-5]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[2-5]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[2-5]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[2-5]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
@@ -80,7 +80,7 @@
 curr[2-5]_label		"iout[1-4]".
 curr[2-5]_input		Measured current. From READ_IOUT register.
 curr[2-5]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
-curr[2-5]_lcrit		Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+curr[2-5]_lcrit		Critical minimum output current. From IOUT_UC_FAULT_LIMIT
 			register.
 curr[2-5]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
 curr[2-5]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index a4e8d90..98ebacb 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -106,7 +106,7 @@
 in1_input		Measured input voltage.
 in1_min			Minimum input voltage.
 in1_max			Maximum input voltage.
-in1_lcrit		Critical minumum input voltage.
+in1_lcrit		Critical minimum input voltage.
 in1_crit		Critical maximum input voltage.
 in1_min_alarm		Input voltage low alarm.
 in1_max_alarm		Input voltage high alarm.
@@ -115,7 +115,7 @@
 
 in2_label		"vout1"
 in2_input		Measured output voltage.
-in2_lcrit		Critical minumum output Voltage.
+in2_lcrit		Critical minimum output Voltage.
 in2_crit		Critical maximum output voltage.
 in2_lcrit_alarm		Critical output voltage critical low alarm.
 in2_crit_alarm		Critical output voltage critical high alarm.
diff --git a/Documentation/i2o/ioctl b/Documentation/i2o/ioctl
index 22ca53a..27c3c54 100644
--- a/Documentation/i2o/ioctl
+++ b/Documentation/i2o/ioctl
@@ -138,7 +138,7 @@
 
    The return value is the size in bytes of the data written into
    ops->resbuf if no errors occur.  If an error occurs, -1 is returned
-   and errno is set appropriatly:
+   and errno is set appropriately:
 
       EFAULT      Invalid user space pointer was passed
       ENXIO       Invalid IOP number
@@ -222,7 +222,7 @@
    RETURNS
 
    This function returns 0 no errors occur. If an error occurs, -1
-   is returned and errno is set appropriatly:
+   is returned and errno is set appropriately:
 
       EFAULT      Invalid user space pointer was passed
       ENXIO       Invalid IOP number
@@ -264,7 +264,7 @@
    RETURNS
 
    This function returns 0 if no errors occur.  If an error occurs, -1
-   is returned and errno is set appropriatly:
+   is returned and errno is set appropriately:
 
       EFAULT      Invalid user space pointer was passed
       ENXIO       Invalid IOP number
@@ -301,7 +301,7 @@
    RETURNS
 
    This function returns 0 if no errors occur.  If an error occurs, -1
-   is returned and errno is set appropriatly:
+   is returned and errno is set appropriately:
 
       EFAULT      Invalid user space pointer was passed
       ENXIO       Invalid IOP number
@@ -325,7 +325,7 @@
    RETURNS
 
    This function returns 0 if no erro occur.  If an error occurs, -1 is
-   returned and errno is set appropriatly:
+   returned and errno is set appropriately:
 
       ETIMEDOUT   Timeout waiting for reply message
       ENXIO       Invalid IOP number
@@ -360,7 +360,7 @@
    RETURNS
 
    This function returns 0 if no error occur. If an error occurs, -1
-   is returned and errno is set appropriatly:
+   is returned and errno is set appropriately:
 
       EFAULT      Invalid user space pointer was passed
       ENXIO       Invalid IOP number
diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004
index 190d17b..4cc3ad9 100644
--- a/Documentation/ide/ChangeLog.ide-cd.1994-2004
+++ b/Documentation/ide/ChangeLog.ide-cd.1994-2004
@@ -175,7 +175,7 @@
  *                         since the .pdf version doesn't seem to work...
  *                     -- Updated the TODO list to something more current.
  *
- * 4.15  Aug 25, 1998  -- Updated ide-cd.h to respect mechine endianess,
+ * 4.15  Aug 25, 1998  -- Updated ide-cd.h to respect machine endianness,
  *                         patch thanks to "Eddie C. Dost" <ecd@skynet.be>
  *
  * 4.50  Oct 19, 1998  -- New maintainers!
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index 2f95308..ae8ba9a 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -132,8 +132,8 @@
  byte 5:    0    1    ?    ?    ?    ?   f1   f0
 
 This packet only appears after a position packet with the mt bit set, and
-ususally only appears when there are two or more contacts (although
-ocassionally it's seen with only a single contact).
+usually only appears when there are two or more contacts (although
+occassionally it's seen with only a single contact).
 
 The final v3 packet type is the trackstick packet.
 
diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt
index 8007b7c..304262b 100644
--- a/Documentation/input/joystick.txt
+++ b/Documentation/input/joystick.txt
@@ -330,7 +330,7 @@
   The TM DirectConnect (BSP) protocol is supported by the tmdc.c
 module. This includes, but is not limited to:
 
-* ThrustMaster Millenium 3D Inceptor
+* ThrustMaster Millennium 3D Interceptor
 * ThrustMaster 3D Rage Pad
 * ThrustMaster Fusion Digital Game Pad
 
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt
index 91a6ecb..18eb98c 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.txt
@@ -596,7 +596,7 @@
 	     if CHS/LBA28
 
 	  The association between in_flags.all and each enable
-	  bitfield flips depending on endianess; fortunately, TASKFILE
+	  bitfield flips depending on endianness; fortunately, TASKFILE
 	  only uses inflags.b.data bit and ignores all other bits.
 	  The end result is that, on any endian machines, it has no
 	  effect other than modifying in_flags on completion.
@@ -720,7 +720,7 @@
 
 	  [6] Do not access {in|out}_flags->all except for resetting
 	  all the bits.  Always access individual bit fields.  ->all
-	  value will flip depending on endianess.  For the same
+	  value will flip depending on endianness.  For the same
 	  reason, do not use IDE_{TASKFILE|HOB}_STD_{OUT|IN}_FLAGS
 	  constants defined in hdreg.h.
 
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 44e2649..a686f9c 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -117,7 +117,7 @@
   This attribute is only applicable to menu blocks, if the condition is
   false, the menu block is not displayed to the user (the symbols
   contained there can still be selected by other symbols, though). It is
-  similar to a conditional "prompt" attribude for individual menu
+  similar to a conditional "prompt" attribute for individual menu
   entries. Default value of "visible" is true.
 
 - numerical ranges: "range" <symbol> <symbol> ["if" <expr>]
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d99fd9c..8cadb75 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -950,7 +950,7 @@
 			     controller
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
-	i8042.notimeout	[HW] Ignore timeout condition signalled by conroller
+	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
 	i8042.reset	[HW] Reset the controller during init and cleanup
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 
@@ -2440,7 +2440,7 @@
 			For more information see Documentation/vm/slub.txt.
 
 	slub_min_order=	[MM, SLUB]
-			Determines the mininum page order for slabs. Must be
+			Determines the minimum page order for slabs. Must be
 			lower than slub_max_order.
 			For more information see Documentation/vm/slub.txt.
 
@@ -2606,7 +2606,7 @@
 
 	threadirqs	[KNL]
 			Force threading of all interrupt handlers except those
-			marked explicitely IRQF_NO_THREAD.
+			marked explicitly IRQF_NO_THREAD.
 
 	topology=	[S390]
 			Format: {off | on}
diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt
index 6e0d2a9..f648eb2 100644
--- a/Documentation/networking/fore200e.txt
+++ b/Documentation/networking/fore200e.txt
@@ -44,7 +44,7 @@
 the various ForeThought software distributions.
 
 Notice that different versions of the PCA-200E firmware exist, depending
-on the endianess of the host architecture. The driver is shipped with
+on the endianness of the host architecture. The driver is shipped with
 both little and big endian PCA firmware images.
 
 Name and location of the new firmware images can be set at kernel
diff --git a/Documentation/numastat.txt b/Documentation/numastat.txt
index 9fcc9a6..5203277 100644
--- a/Documentation/numastat.txt
+++ b/Documentation/numastat.txt
@@ -5,18 +5,23 @@
 
 All units are pages. Hugepages have separate counters.
 
-numa_hit			A process wanted to allocate memory from this node,
-					and succeeded.
-numa_miss			A process wanted to allocate memory from another node,
-					but ended up with memory from this node.
-numa_foreign		A process wanted to allocate on this node,
-				    but ended up with memory from another one.
-local_node			A process ran on this node and got memory from it.
-other_node			A process ran on this node and got memory from another node.
-interleave_hit 		Interleaving wanted to allocate from this node
-					and succeeded.
+numa_hit	A process wanted to allocate memory from this node,
+		and succeeded.
+
+numa_miss	A process wanted to allocate memory from another node,
+		but ended up with memory from this node.
+
+numa_foreign	A process wanted to allocate on this node,
+		but ended up with memory from another one.
+
+local_node	A process ran on this node and got memory from it.
+
+other_node	A process ran on this node and got memory from another node.
+
+interleave_hit 	Interleaving wanted to allocate from this node
+		and succeeded.
 
 For easier reading you can use the numastat utility from the numactl package
-(ftp://ftp.suse.com/pub/people/ak/numa/numactl*). Note that it only works
+(http://oss.sgi.com/projects/libnuma/). Note that it only works
 well right now on machines with a small number of CPUs.
 
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index c56ec99..2f6d595 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -1718,7 +1718,7 @@
 	* lpfc_els_timeout_handler() now uses system timer.
 	* Further cleanup of #ifdef powerpc
 	* lpfc_scsi_timeout_handler() now uses system timer.
-	* Replace common driver's own defines for endianess w/ Linux's
+	* Replace common driver's own defines for endianness w/ Linux's
 	  __BIG_ENDIAN etc.
 	* Added #ifdef IPFC for all IPFC specific code.
 	* lpfc_disc_retry_rptlun() now uses system timer.
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 57566ba..83f8ea8 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -510,7 +510,7 @@
 3 Older Version   : 00.00.02.02 
 i.	Register 16 byte CDB capability with scsi midlayer 
 
-	"Ths patch properly registers the 16 byte command length capability of the 
+	"This patch properly registers the 16 byte command length capability of the 
 	megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas 
 	hardware supports 16 byte CDB's."
 
diff --git a/Documentation/scsi/scsi-generic.txt b/Documentation/scsi/scsi-generic.txt
index 0a22ab8..51be20a 100644
--- a/Documentation/scsi/scsi-generic.txt
+++ b/Documentation/scsi/scsi-generic.txt
@@ -62,7 +62,7 @@
                 and earlier
 Both packages will work in the lk 2.4 series however sg3_utils offers more
 capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and 
-freshmeat.net
+freecode.com
 
 Another approach is to look at the applications that use the sg driver.
 These include cdrecord, cdparanoia, SANE and cdrdao.
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index 61c0531..3303d21 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -102,7 +102,7 @@
   ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz
 
 One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram
-DC390F (Sym53c875) accepted this as well as my Millenium. But the Am53C974
+DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974
 produced errors and started to corrupt my disks. So don't do that! A 37.50
 MHz PCI bus works for me, though, but I don't recommend using higher clocks
 than the 33.33 MHz being in the PCI spec.
diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt
index e9dab41..d2f72ae 100644
--- a/Documentation/security/Smack.txt
+++ b/Documentation/security/Smack.txt
@@ -536,6 +536,6 @@
 3 : log denied & accepted
 
 Events are logged as 'key=value' pairs, for each event you at least will get
-the subjet, the object, the rights requested, the action, the kernel function
+the subject, the object, the rights requested, the action, the kernel function
 that triggered the event, plus other pairs depending on the type of event
 audited.
diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt
index c9e4855..e105ae9 100644
--- a/Documentation/security/keys-trusted-encrypted.txt
+++ b/Documentation/security/keys-trusted-encrypted.txt
@@ -1,7 +1,7 @@
 			Trusted and Encrypted Keys
 
 Trusted and Encrypted Keys are two new key types added to the existing kernel
-key ring service.  Both of these new types are variable length symmetic keys,
+key ring service.  Both of these new types are variable length symmetric keys,
 and in both cases all keys are created in the kernel, and user space sees,
 stores, and loads only encrypted blobs.  Trusted Keys require the availability
 of a Trusted Platform Module (TPM) chip for greater security, while Encrypted
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt
index 4d75931..fcbe7a7 100644
--- a/Documentation/security/keys.txt
+++ b/Documentation/security/keys.txt
@@ -668,7 +668,7 @@
 
      If the kernel calls back to userspace to complete the instantiation of a
      key, userspace should use this call mark the key as negative before the
-     invoked process returns if it is unable to fulfil the request.
+     invoked process returns if it is unable to fulfill the request.
 
      The process must have write access on the key to be able to instantiate
      it, and the key must be uninstantiated.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 936699e..12e3a0f 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1588,7 +1588,7 @@
 
     Module supports autoprobe a chip.
 
-    Note: the driver may have problems regarding endianess.
+    Note: the driver may have problems regarding endianness.
 
     The power-management is supported.
 
diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py
index 6e21b8b..a78879b 100755
--- a/Documentation/target/tcm_mod_builder.py
+++ b/Documentation/target/tcm_mod_builder.py
@@ -775,7 +775,7 @@
 			buf += "	struct " + fabric_mod_name + "_nacl *nacl;\n\n"
 			buf += "	nacl = kzalloc(sizeof(struct " + fabric_mod_name + "_nacl), GFP_KERNEL);\n"
 			buf += "	if (!nacl) {\n"
-			buf += "		printk(KERN_ERR \"Unable to alocate struct " + fabric_mod_name + "_nacl\\n\");\n"
+			buf += "		printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_nacl\\n\");\n"
 			buf += "		return NULL;\n"
 			buf += "	}\n\n"
 			buf += "	return &nacl->se_node_acl;\n"
diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt
index 96d87b6..cf794af 100644
--- a/Documentation/trace/events-power.txt
+++ b/Documentation/trace/events-power.txt
@@ -57,7 +57,7 @@
 The 'type' parameter takes one of those macros:
  . POWER_NONE	= 0,
  . POWER_CSTATE	= 1,	/* C-State */
- . POWER_PSTATE	= 2,	/* Fequency change or DVFS */
+ . POWER_PSTATE	= 2,	/* Frequency change or DVFS */
 
 The 'state' parameter is set depending on the type:
  . Target C-state for type=POWER_CSTATE,
diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
index 86302cd..a91adb2 100644
--- a/Documentation/usb/mtouchusb.txt
+++ b/Documentation/usb/mtouchusb.txt
@@ -1,7 +1,7 @@
 CHANGES
 
 - 0.3 - Created based off of scanner & INSTALL from the original touchscreen
-  driver on freshmeat (http://freshmeat.net/projects/3mtouchscreendriver)
+  driver on freecode (http://freecode.com/projects/3mtouchscreendriver)
 - Amended for linux-2.4.18, then 2.4.19
 
 - 0.5 - Complete rewrite using Linux Input in 2.6.3
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 12511c9..817df29 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -345,7 +345,7 @@
 Drivers need not be concerned about balancing changes to the usage
 counter; the USB core will undo any remaining "get"s when a driver
 is unbound from its interface.  As a corollary, drivers must not call
-any of the usb_autopm_* functions after their diconnect() routine has
+any of the usb_autopm_* functions after their disconnect() routine has
 returned.
 
 Drivers using the async routines are responsible for their own
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index afe596d..c9c3f0f 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -7,7 +7,7 @@
 /proc/bus/usb.  It provides the /proc/bus/usb/devices file, as well as
 the /proc/bus/usb/BBB/DDD files.
 
-In many modern systems the usbfs filsystem isn't used at all.  Instead
+In many modern systems the usbfs filesystem isn't used at all.  Instead
 USB device nodes are created under /dev/usb/ or someplace similar.  The
 "devices" file is available in debugfs, typically as
 /sys/kernel/debug/usb/devices.
diff --git a/Documentation/video4linux/uvcvideo.txt b/Documentation/video4linux/uvcvideo.txt
index 848d620..35ce19c 100644
--- a/Documentation/video4linux/uvcvideo.txt
+++ b/Documentation/video4linux/uvcvideo.txt
@@ -116,7 +116,7 @@
 	A UVC control can be mapped to several V4L2 controls. For instance,
 	a UVC pan/tilt control could be mapped to separate pan and tilt V4L2
 	controls. The UVC control is divided into non overlapping fields using
-	the 'size' and 'offset' fields and are then independantly mapped to
+	the 'size' and 'offset' fields and are then independently mapped to
 	V4L2 control.
 
 	For signed integer V4L2 controls the data_type field should be set to
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt
index 5dc972c..fa5f1db 100644
--- a/Documentation/virtual/kvm/mmu.txt
+++ b/Documentation/virtual/kvm/mmu.txt
@@ -347,7 +347,7 @@
 
 - the spte must point to a large host page
 - the guest pte must be a large pte of at least equivalent size (if tdp is
-  enabled, there is no guest pte and this condition is satisified)
+  enabled, there is no guest pte and this condition is satisfied)
 - if the spte will be writeable, the large page frame may not overlap any
   write-protected pages
 - the guest page must be wholly contained by a single memory slot
@@ -356,7 +356,7 @@
 arrays for each memory slot and large page size.  Every write protected page
 causes its write_count to be incremented, thus preventing instantiation of
 a large spte.  The frames at the end of an unaligned memory slot have
-artificically inflated ->write_counts so they can never be instantiated.
+artificially inflated ->write_counts so they can never be instantiated.
 
 Further reading
 ===============
diff --git a/Documentation/virtual/virtio-spec.txt b/Documentation/virtual/virtio-spec.txt
index a350ae1..da09473 100644
--- a/Documentation/virtual/virtio-spec.txt
+++ b/Documentation/virtual/virtio-spec.txt
@@ -1403,7 +1403,7 @@
 
 Packets are transmitted by placing them in the transmitq, and
 buffers for incoming packets are placed in the receiveq. In each
-case, the packet itself is preceeded by a header:
+case, the packet itself is preceded by a header:
 
 struct virtio_net_hdr {
 
@@ -1642,7 +1642,7 @@
 
 The device can filter incoming packets by any number of
 destination MAC addresses.[footnote:
-Since there are no guarentees, it can use a hash filter
+Since there are no guarantees, it can use a hash filter
 orsilently switch to allmulti or promiscuous mode if it is given
 too many addresses.
 ] This table is set using the class VIRTIO_NET_CTRL_MAC and the
@@ -1805,7 +1805,7 @@
 distinguish between them
 ]). If the device has VIRTIO_BLK_F_BARRIER feature the high bit
 (VIRTIO_BLK_T_BARRIER) indicates that this request acts as a
-barrier and that all preceeding requests must be complete before
+barrier and that all preceding requests must be complete before
 this one, and all following requests must not be started until
 this is complete. Note that a barrier does not flush caches in
 the underlying backend device in host, and thus does not serve as
@@ -2118,7 +2118,7 @@
 
   Otherwise, the guest may begin to re-use pages previously given
     to the balloon before the device has acknowledged their
-    withdrawl. [footnote:
+    withdrawal. [footnote:
 In this case, deflation advice is merely a courtesy
 ]
 
diff --git a/Documentation/vm/cleancache.txt b/Documentation/vm/cleancache.txt
index 36c367c..d5c615a 100644
--- a/Documentation/vm/cleancache.txt
+++ b/Documentation/vm/cleancache.txt
@@ -92,7 +92,7 @@
 puts		- number of puts attempted (all "succeed")
 flushes		- number of flushes attempted
 
-A backend implementatation may provide additional metrics.
+A backend implementation may provide additional metrics.
 
 FAQ
 
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 97bae3c..fa206cc 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -538,7 +538,7 @@
      process because mlocked pages are migratable.  However, for reclaim, if
      the page is mapped into a VM_LOCKED VMA, the scan stops.
 
-     try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of
+     try_to_unmap_anon() attempts to acquire in read mode the mmap semaphore of
      the mm_struct to which the VMA belongs.  If this is successful, it will
      mlock the page via mlock_vma_page() - we wouldn't have gotten to
      try_to_unmap_anon() if the page were already mlocked - and will return
@@ -619,11 +619,11 @@
 introduced a variant of try_to_unmap() called try_to_munlock().
 
 try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
-mapped file pages with an additional argument specifing unlock versus unmap
+mapped file pages with an additional argument specifying unlock versus unmap
 processing.  Again, these functions walk the respective reverse maps looking
 for VM_LOCKED VMAs.  When such a VMA is found for anonymous pages and file
 pages mapped in linear VMAs, as in the try_to_unmap() case, the functions
-attempt to acquire the associated mmap semphore, mlock the page via
+attempt to acquire the associated mmap semaphore, mlock the page via
 mlock_vma_page() and return SWAP_MLOCK.  This effectively undoes the
 pre-clearing of the page's PG_mlocked done by munlock_vma_page.
 
@@ -641,7 +641,7 @@
 Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
 reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
 However, the scan can terminate when it encounters a VM_LOCKED VMA and can
-successfully acquire the VMA's mmap semphore for read and mlock the page.
+successfully acquire the VMA's mmap semaphore for read and mlock the page.
 Although try_to_munlock() might be called a great many times when munlocking a
 large region or tearing down a large address space that has been mlocked via
 mlockall(), overall this is a fairly rare event.
diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt
index 4b93c28..9e16246 100644
--- a/Documentation/watchdog/watchdog-kernel-api.txt
+++ b/Documentation/watchdog/watchdog-kernel-api.txt
@@ -167,4 +167,4 @@
 
 The watchdog_get_drvdata function allows you to retrieve driver specific data.
 The argument of this function is the watchdog device where you want to retrieve
-data from. The function retruns the pointer to the driver specific data.
+data from. The function returns the pointer to the driver specific data.
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index 13cd427..72dbf23 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -90,7 +90,7 @@
 	void (*kill_arch)(int);
 
 	u8 (*pci_swizzle)(struct pci_dev *, u8 *);
-	int (*pci_map_irq)(struct pci_dev *, u8, u8);
+	int (*pci_map_irq)(const struct pci_dev *, u8, u8);
 	struct pci_ops *pci_ops;
 
 	struct _alpha_agp_info *(*agp_info)(void);
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index bb7f0c7..13f0717 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -366,7 +366,7 @@
  */
 
 static int __init
-isa_irq_fixup(struct pci_dev *dev, int irq)
+isa_irq_fixup(const struct pci_dev *dev, int irq)
 {
 	u8 irq8;
 
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 1024396..e5fd241 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -35,7 +35,6 @@
 
 #include <linux/pfn.h>
 #include <linux/atomic.h>
-#include <linux/sched.h>
 #include <mach/dma.h>
 
 /* ---- Public Variables ------------------------------------------------- */
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index d6f6502..4bd7075 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
 
 #include <asm/leds.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 4538093..4c5ce7d 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -117,7 +117,7 @@
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
 	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA virtual resulotion is not supported "
+		printk(KERN_ERR "DMA virtual resolution is not supported "
 				"in 1510 mode\n");
 		BUG();
 	}
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index a104d5a..e52108c 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -214,7 +214,7 @@
 		if (gpio_direction_input(pin) == 0) {
 			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit faield to "
+			printk(KERN_ERR "db88f5281_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
 			gpio_free(pin);
 		}
@@ -227,7 +227,7 @@
 		if (gpio_direction_input(pin) == 0) {
 			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit faield "
+			printk(KERN_ERR "db88f5281_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
 			gpio_free(pin);
 		}
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 96438b6..e3ce617 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -149,7 +149,7 @@
 		if (gpio_direction_input(pin) == 0) {
 			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
 			gpio_free(pin);
 		}
@@ -162,7 +162,7 @@
 		if (gpio_direction_input(pin) == 0) {
 			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
 			gpio_free(pin);
 		}
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a5e46b4..4f7f518 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -469,7 +469,7 @@
 	if (pmx_driver.base) {
 		ret = pmx_register(&pmx_driver);
 		if (ret)
-			printk(KERN_ERR "padmux: registeration failed. err no"
+			printk(KERN_ERR "padmux: registration failed. err no"
 					": %d\n", ret);
 		/* Free Mapping, device selection already done */
 		iounmap(pmx_driver.base);
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 9004cf9..febaa6f 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -303,6 +303,6 @@
 
 	ret = pmx_register(&pmx_driver);
 	if (ret)
-		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
 				ret);
 }
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index ee29bef..deaaf19 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -550,6 +550,6 @@
 
 	ret = pmx_register(&pmx_driver);
 	if (ret)
-		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
 				ret);
 }
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 5dc7d12..245a55a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -32,7 +32,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/memblock.h>
 
 #include "mm.h"
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 68296b1..699f931 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -52,7 +52,7 @@
 	    !machine_is_aml_m5900())
 		return 0;
 
-	printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
+	printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
 
 	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
 	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c
index b279e14..3bb1223 100644
--- a/arch/ia64/xen/irq_xen.c
+++ b/arch/ia64/xen/irq_xen.c
@@ -58,7 +58,7 @@
 
 	irq_op.vector = vector;
 	if (HYPERVISOR_physdev_op(PHYSDEVOP_free_irq_vector, &irq_op))
-		printk(KERN_WARNING "%s: xen_free_irq_vecotr fail vector=%d\n",
+		printk(KERN_WARNING "%s: xen_free_irq_vector fail vector=%d\n",
 		       __func__, vector);
 }
 
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index d209f85..356b055 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -33,7 +33,7 @@
 	u32 reg;
 
 	/* soft reset all blocks */
-	printk(KERN_INFO "soft-reseting all blocks ...\n");
+	printk(KERN_INFO "soft-resetting all blocks ...\n");
 	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
 	reg &= ~SOFTRESET_6348_ALL;
 	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
index fc195d0..2156315 100644
--- a/arch/powerpc/include/asm/keylargo.h
+++ b/arch/powerpc/include/asm/keylargo.h
@@ -21,7 +21,7 @@
 #define KEYLARGO_FCR4		0x48
 #define KEYLARGO_FCR5		0x4c	/* Pangea only */
 
-/* K2 aditional FCRs */
+/* K2 additional FCRs */
 #define K2_FCR6			0x34
 #define K2_FCR7			0x30
 #define K2_FCR8			0x2c
diff --git a/arch/score/Kconfig.debug b/arch/score/Kconfig.debug
index a1f346d..d8a9b2d 100644
--- a/arch/score/Kconfig.debug
+++ b/arch/score/Kconfig.debug
@@ -22,7 +22,7 @@
 	help
 	  If you say Y here, some debugging macros will do run-time checking.
 	  If you say N here, those macros will mostly turn to no-ops.  See
-	  include/asm-score/debug.h for debuging macros.
+	  include/asm-score/debug.h for debugging macros.
 	  If unsure, say N.
 
 endmenu
diff --git a/arch/x86/platform/scx200/scx200_32.c b/arch/x86/platform/scx200/scx200_32.c
index 7e004ac..7a9ad30 100644
--- a/arch/x86/platform/scx200/scx200_32.c
+++ b/arch/x86/platform/scx200/scx200_32.c
@@ -17,8 +17,6 @@
 /* Verify that the configuration block really is there */
 #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base))
 
-#define NAME "scx200"
-
 MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
 MODULE_DESCRIPTION("NatSemi SCx200 Driver");
 MODULE_LICENSE("GPL");
@@ -29,10 +27,10 @@
 unsigned scx200_cb_base = 0;
 
 static struct pci_device_id scx200_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS)   },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS)   },
+	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
+	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
+	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_XBUS)   },
+	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SC1100_XBUS)   },
 	{ },
 };
 MODULE_DEVICE_TABLE(pci,scx200_tbl);
@@ -63,10 +61,11 @@
 	if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE ||
 	    pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) {
 		base = pci_resource_start(pdev, 0);
-		printk(KERN_INFO NAME ": GPIO base 0x%x\n", base);
+		pr_info("GPIO base 0x%x\n", base);
 
-		if (!request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO")) {
-			printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n");
+		if (!request_region(base, SCx200_GPIO_SIZE,
+				    "NatSemi SCx200 GPIO")) {
+			pr_err("can't allocate I/O for GPIOs\n");
 			return -EBUSY;
 		}
 
@@ -82,11 +81,11 @@
 			if (scx200_cb_probe(base)) {
 				scx200_cb_base = base;
 			} else {
-				printk(KERN_WARNING NAME ": Configuration Block not found\n");
+				pr_warn("Configuration Block not found\n");
 				return -ENODEV;
 			}
 		}
-		printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base);
+		pr_info("Configuration Block base 0x%x\n", scx200_cb_base);
 	}
 
 	return 0;
@@ -111,8 +110,7 @@
 
 static int __init scx200_init(void)
 {
-	printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
-
+	pr_info("NatSemi SCx200 Driver\n");
 	return pci_register_driver(&scx200_pci_driver);
 }
 
diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c
index 1f3c1a7..38a2d06 100644
--- a/drivers/block/nvme.c
+++ b/drivers/block/nvme.c
@@ -39,7 +39,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <linux/version.h>
 
 #include <asm-generic/io-64-nonatomic-lo-hi.h>
 
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index da3cfee..eaade8a 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -94,7 +94,7 @@
 /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
  * rtc_lock held. Due to the index-port/data-port design of the RTC, we
  * don't want two different things trying to get to it at once. (e.g. the
- * periodic 11 min sync from time.c vs. this driver.)
+ * periodic 11 min sync from kernel/time/ntp.c vs. this driver.)
  */
 
 #include <linux/types.h>
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index ccd124a..872e09a 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -57,8 +57,8 @@
  *	Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
  *	interrupts disabled. Due to the index-port/data-port (0x70/0x71)
  *	design of the RTC, we don't want two different things trying to
- *	get to it at once. (e.g. the periodic 11 min sync from time.c vs.
- *	this driver.)
+ *	get to it at once. (e.g. the periodic 11 min sync from
+ *      kernel/time/ntp.c vs. this driver.)
  */
 
 #include <linux/interrupt.h>
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index a174862..70fac9a 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -76,7 +76,7 @@
 #define	TPM_RID(l)			(0x0F04 | ((l) << 12))
 
 static LIST_HEAD(tis_chips);
-static DEFINE_SPINLOCK(tis_lock);
+static DEFINE_MUTEX(tis_lock);
 
 #if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
 static int is_itpm(struct pnp_dev *dev)
@@ -689,9 +689,9 @@
 	}
 
 	INIT_LIST_HEAD(&chip->vendor.list);
-	spin_lock(&tis_lock);
+	mutex_lock(&tis_lock);
 	list_add(&chip->vendor.list, &tis_chips);
-	spin_unlock(&tis_lock);
+	mutex_unlock(&tis_lock);
 
 
 	return 0;
@@ -855,7 +855,7 @@
 {
 	struct tpm_vendor_specific *i, *j;
 	struct tpm_chip *chip;
-	spin_lock(&tis_lock);
+	mutex_lock(&tis_lock);
 	list_for_each_entry_safe(i, j, &tis_chips, list) {
 		chip = to_tpm_chip(i);
 		tpm_remove_hardware(chip->dev);
@@ -871,7 +871,7 @@
 		iounmap(i->iobase);
 		list_del(&i->list);
 	}
-	spin_unlock(&tis_lock);
+	mutex_unlock(&tis_lock);
 #ifdef CONFIG_PNP
 	if (!force) {
 		pnp_unregister_driver(&tis_pnp_driver);
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 04be90b..faf88b7 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -1482,7 +1482,7 @@
 		goto err_free_adev;
 	}
 
-	dev_dbg(&pdev->dev, "%s: allocted descriptor pool virt %p phys %p\n",
+	dev_dbg(&pdev->dev, "%s: allocated descriptor pool virt %p phys %p\n",
 		__func__, adev->dma_desc_pool_virt,
 		(void *) adev->dma_desc_pool);
 
diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c
index a25e4ca..0a43758 100644
--- a/drivers/gpu/drm/gma500/psb_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
@@ -713,7 +713,6 @@
 
 	psb_intel_encoder =
 			kzalloc(sizeof(struct psb_intel_encoder), GFP_KERNEL);
-
 	if (!psb_intel_encoder) {
 		dev_err(dev->dev, "psb_intel_encoder allocation error\n");
 		return;
@@ -721,10 +720,9 @@
 
 	psb_intel_connector =
 		kzalloc(sizeof(struct psb_intel_connector), GFP_KERNEL);
-
 	if (!psb_intel_connector) {
-		kfree(psb_intel_encoder);
 		dev_err(dev->dev, "psb_intel_connector allocation error\n");
+		goto failed_encoder;
 	}
 
 	lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL);
@@ -862,7 +860,8 @@
 	drm_encoder_cleanup(encoder);
 	drm_connector_cleanup(connector);
 failed_connector:
-	if (psb_intel_connector)
-		kfree(psb_intel_connector);
+	kfree(psb_intel_connector);
+failed_encoder:
+	kfree(psb_intel_encoder);
 }
 
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 959bf44..c520d06 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -150,7 +150,7 @@
 
 	if (r100_gui_wait_for_idle(rdev)) {
 		printk(KERN_WARNING "Failed to wait GUI idle while "
-		       "reseting GPU. Bad things might happen.\n");
+		       "resetting GPU. Bad things might happen.\n");
 	}
 	rv515_vga_render_disable(rdev);
 	r420_pipes_init(rdev);
@@ -162,7 +162,7 @@
 	WREG32_PLL(0x000D, tmp);
 	if (r100_gui_wait_for_idle(rdev)) {
 		printk(KERN_WARNING "Failed to wait GUI idle while "
-		       "reseting GPU. Bad things might happen.\n");
+		       "resetting GPU. Bad things might happen.\n");
 	}
 	if (rv515_mc_wait_for_idle(rdev)) {
 		printk(KERN_WARNING "Failed to wait MC idle while "
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index f390f5f..2d6f573 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -430,7 +430,7 @@
 	svga_id = vmw_read(dev_priv, SVGA_REG_ID);
 	if (svga_id != SVGA_ID_2) {
 		ret = -ENOSYS;
-		DRM_ERROR("Unsuported SVGA ID 0x%x\n", svga_id);
+		DRM_ERROR("Unsupported SVGA ID 0x%x\n", svga_id);
 		mutex_unlock(&dev_priv->hw_mutex);
 		goto out_err0;
 	}
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index 8b9a7748..951442a 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -624,7 +624,7 @@
 			goto exit_remove;
 	}
 
-	/* Register aditional tmp411 sysfs hooks */
+	/* Register additional tmp411 sysfs hooks */
 	if (data->kind == tmp411) {
 		for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) {
 			err = device_create_file(&client->dev,
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 2b73d43..ebe33d9 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -3450,7 +3450,7 @@
 
 	nacl = kzalloc(sizeof(struct srpt_node_acl), GFP_KERNEL);
 	if (!nacl) {
-		printk(KERN_ERR "Unable to alocate struct srpt_node_acl\n");
+		printk(KERN_ERR "Unable to allocate struct srpt_node_acl\n");
 		return NULL;
 	}
 
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index a08a534..132f93b 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1247,7 +1247,7 @@
 	unsigned long nlongs;
 
 	ndomains = cap_ndoms(iommu->cap);
-	pr_debug("IOMMU %d: Number of Domains supportd <%ld>\n", iommu->seq_id,
+	pr_debug("IOMMU %d: Number of Domains supported <%ld>\n", iommu->seq_id,
 			ndomains);
 	nlongs = BITS_TO_LONGS(ndomains);
 
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 2fd435b..831d751 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -356,7 +356,7 @@
 	static char *mb_content_types[] = {
 		"a floppy drive",
 		"a floppy drive",
-		"an unsuported audio device",
+		"an unsupported audio device",
 		"an ATA device",
 		"an unsupported PCI device",
 		"an unknown device",
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index 0a6806f..b6e58c7 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -12,7 +12,6 @@
 #include <linux/dm-io.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <linux/shrinker.h>
 #include <linux/module.h>
 
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index b3fe05b..291f6b1 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -1054,7 +1054,7 @@
 	if (ret)
 		info("TUN Found %s tuner", tun_msg[ret]);
 	else {
-		info("TUN No tuner found --- reseting device");
+		info("TUN No tuner found --- resetting device");
 		lme_coldreset(adap->dev->udev);
 		return -ENODEV;
 	}
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
index 6980ed7..5ab5379 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -28,7 +28,6 @@
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <asm/div64.h>
 
 #include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index ae6f22a..35d72b4 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -1272,7 +1272,7 @@
 	/* allocate memory for the internal state */
 	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
 	if (!state) {
-		printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
+		printk(KERN_ERR "Can't allocate memory for tda10045 state\n");
 		return NULL;
 	}
 
@@ -1342,7 +1342,7 @@
 	/* allocate memory for the internal state */
 	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
 	if (!state) {
-		printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
+		printk(KERN_ERR "Can't allocate memory for tda10046 state\n");
 		return NULL;
 	}
 
diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c
index 672cf4d..10c68df 100644
--- a/drivers/media/dvb/mantis/mantis_hif.c
+++ b/drivers/media/dvb/mantis/mantis_hif.c
@@ -76,7 +76,7 @@
 		udelay(500);
 		timeout++;
 		if (timeout > 100) {
-			dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
+			dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write operation timed out!", mantis->num);
 			rc = -ETIMEDOUT;
 			break;
 		}
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 2dd4859..7ab9afa 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -172,7 +172,7 @@
 		fmr2->volume = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 0, 68, 2, 56);
 		fmr2->balance = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_BALANCE, -68, 68, 2, 0);
 		if (tea->ctrl_handler.error) {
-			printk(KERN_ERR "radio-sf16fmr2: can't initialize contrls\n");
+			printk(KERN_ERR "radio-sf16fmr2: can't initialize controls\n");
 			return tea->ctrl_handler.error;
 		}
 	}
diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c
index f83baf3..5b68847 100644
--- a/drivers/media/video/davinci/dm355_ccdc.c
+++ b/drivers/media/video/davinci/dm355_ccdc.c
@@ -292,7 +292,7 @@
 	if ((ccdcparam->med_filt_thres < 0) ||
 	   (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
 		dev_dbg(ccdc_cfg.dev,
-			"Invalid value of median filter thresold\n");
+			"Invalid value of median filter threshold\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index 6806345..3627f32 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -649,7 +649,7 @@
 			clkrc = CLKRC_24MHz;
 		} else {
 			dev_err(&client->dev,
-				"unspported input clock, check platform data\n");
+				"unsupported input clock, check platform data\n");
 			return -EINVAL;
 		}
 		mclk = sense->master_clock;
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
index bd56a76..54d0fe4 100644
--- a/drivers/mfd/ab5500-core.c
+++ b/drivers/mfd/ab5500-core.c
@@ -28,7 +28,6 @@
 #include <linux/bitops.h>
 #include <linux/spinlock.h>
 #include <linux/mfd/core.h>
-#include <linux/version.h>
 #include <linux/mfd/db5500-prcmu.h>
 
 #include "ab5500-core.h"
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 1bcfd6d..c3622a6 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1606,7 +1606,7 @@
 	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!host->mem) {
 		dev_err(&pdev->dev,
-			"failed to get io memory region resouce.\n");
+			"failed to get io memory region resource.\n");
 
 		ret = -ENOENT;
 		goto probe_free_gpio;
@@ -1630,7 +1630,7 @@
 
 	host->irq = platform_get_irq(pdev, 0);
 	if (host->irq == 0) {
-		dev_err(&pdev->dev, "failed to get interrupt resouce.\n");
+		dev_err(&pdev->dev, "failed to get interrupt resource.\n");
 		ret = -EINVAL;
 		goto probe_iounmap;
 	}
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index da1f96f..0bbc61b 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -76,10 +76,7 @@
 	*/
 	module_put(drv->module);
 
-	if (ret)
-		return ret;
-
-	return NULL;
+	return ret;
 }
 /*
  * Destroy an MTD device which was created for a map device.
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index aa15cc4..50f87b6 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -1466,7 +1466,7 @@
 	 * before it starts acting as an AP, so reset port automatically
 	 * here just in case */
 	if (initial && prism2_reset_port(dev)) {
-		printk("%s: MAC port 0 reseting failed\n", dev->name);
+		printk("%s: MAC port 0 resetting failed\n", dev->name);
 		return 1;
 	}
 
@@ -1557,7 +1557,7 @@
 	static long last_reset = 0;
 
 	/* do not reset card more than once per second to avoid ending up in a
-	 * busy loop reseting the card */
+	 * busy loop resetting the card */
 	if (time_before_eq(jiffies, last_reset + HZ))
 		return;
 	last_reset = jiffies;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 9fcde36..c9e2660e 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -856,7 +856,7 @@
 
 	/* semaphore stuck, reset device to avoid fw freeze later */
 	dev_warn(zd_mac_dev(mac), "CR_BCN_FIFO_SEMAPHORE stuck, "
-				  "reseting device...");
+				  "resetting device...");
 	usb_queue_reset_device(mac->chip.usb.intf);
 
 	return r;
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 785bdbe..f766b3e 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1104,7 +1104,7 @@
 		goto out;
 
 	/* TX halted, try reset */
-	dev_warn(zd_usb_dev(usb), "TX-stall detected, reseting device...");
+	dev_warn(zd_usb_dev(usb), "TX-stall detected, resetting device...");
 
 	usb_queue_reset_device(usb->intf);
 
diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c
index 5a34973..ba68d4e 100644
--- a/drivers/platform/x86/hdaps.c
+++ b/drivers/platform/x86/hdaps.c
@@ -379,7 +379,7 @@
 	int ret;
 
 	ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return sprintf(buf, "%u\n", temp);
@@ -392,7 +392,7 @@
 	int ret;
 
 	ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return sprintf(buf, "%u\n", temp);
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 1ed6ea0..222ccd8 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -47,10 +47,10 @@
 #define BQ27x00_REG_TTE			0x16
 #define BQ27x00_REG_TTF			0x18
 #define BQ27x00_REG_TTECP		0x26
-#define BQ27x00_REG_NAC			0x0C /* Nominal available capaciy */
+#define BQ27x00_REG_NAC			0x0C /* Nominal available capacity */
 #define BQ27x00_REG_LMD			0x12 /* Last measured discharge */
 #define BQ27x00_REG_CYCT		0x2A /* Cycle count total */
-#define BQ27x00_REG_AE			0x22 /* Available enery */
+#define BQ27x00_REG_AE			0x22 /* Available energy */
 
 #define BQ27000_REG_RSOC		0x0B /* Relative State-of-Charge */
 #define BQ27000_REG_ILMD		0x76 /* Initial last measured discharge */
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 5f8617d..25417d0 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -8993,7 +8993,7 @@
 					printk("Invalid Command IU Field\n");
 					break;
 				case SIU_PFC_TMF_NOT_SUPPORTED:
-					printk("TMF not supportd\n");
+					printk("TMF not supported\n");
 					break;
 				case SIU_PFC_TMF_FAILED:
 					printk("TMF failed\n");
@@ -9113,7 +9113,7 @@
 		break;
 	}
 	case SCSI_STATUS_OK:
-		printk("%s: Interrupted for staus of 0???\n",
+		printk("%s: Interrupted for status of 0???\n",
 		       ahd_name(ahd));
 		/* FALLTHROUGH */
 	default:
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index dc28b0a..10172a3 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -1049,7 +1049,7 @@
 		ahc_set_scsi_status(scb, hscb->shared_data.status.scsi_status);
 		switch (hscb->shared_data.status.scsi_status) {
 		case SCSI_STATUS_OK:
-			printk("%s: Interrupted for staus of 0???\n",
+			printk("%s: Interrupted for status of 0???\n",
 			       ahc_name(ahc));
 			break;
 		case SCSI_STATUS_CMD_TERMINATED:
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 418391b..6ca9b26 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -58,7 +58,6 @@
 #include "host.h"
 #include "isci.h"
 #include "port.h"
-#include "host.h"
 #include "probe_roms.h"
 #include "remote_device.h"
 #include "request.h"
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 36ea0b2..2b4d376 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -149,7 +149,7 @@
 			desc = "raid_config";
 			break;
 		case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
-			desc = "driver_mappping";
+			desc = "driver_mapping";
 			break;
 		}
 		break;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index b7b92f7..e12c4f6 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3532,7 +3532,7 @@
 		break;
 	case OPC_OUB_DEREG_DEV:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unresgister the deviece\n"));
+			pm8001_printk("unregister the device\n"));
 		mpi_dereg_resp(pm8001_ha, piomb);
 		break;
 	case OPC_OUB_GET_DEV_HANDLE:
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index ca496c7..e1d150f 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -857,11 +857,11 @@
 	{0x01180600, IOASC_LOG_LEVEL_HARD,
 	 "Recovered Error, soft media error, sector reassignment suggested"},
 	{0x015D0000, IOASC_LOG_LEVEL_HARD,
-	 "Recovered Error, failure prediction thresold exceeded"},
+	 "Recovered Error, failure prediction threshold exceeded"},
 	{0x015D9200, IOASC_LOG_LEVEL_HARD,
-	 "Recovered Error, soft Cache Card Battery error thresold"},
+	 "Recovered Error, soft Cache Card Battery error threshold"},
 	{0x015D9200, IOASC_LOG_LEVEL_HARD,
-	 "Recovered Error, soft Cache Card Battery error thresold"},
+	 "Recovered Error, soft Cache Card Battery error threshold"},
 	{0x02048000, IOASC_LOG_LEVEL_HARD,
 	 "Not Ready, IOA Reset Required"},
 	{0x02408500, IOASC_LOG_LEVEL_HARD,
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 1682e2e..2c47142 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -731,7 +731,7 @@
 
 			if (elreq.options != EXTERNAL_LOOPBACK) {
 				ql_dbg(ql_dbg_user, vha, 0x7020,
-				    "Internal: curent port config = %x\n",
+				    "Internal: current port config = %x\n",
 				    config[0]);
 				if (qla81xx_set_internal_loopback(vha, config,
 					new_config)) {
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index ce6d3b7..edf5034 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -3382,7 +3382,7 @@
 		if (qla4xxx_get_flash(ha, buf_dma, addr,
 				      13 * sizeof(uint8_t)) != QLA_SUCCESS) {
 			DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
-					  "failed\n", ha->host_no, __func__));
+					  " failed\n", ha->host_no, __func__));
 			ret = QLA_ERROR;
 			goto exit_boot_info_free;
 		}
@@ -3620,7 +3620,7 @@
 
 	if (ql4xdisablesysfsboot) {
 		ql4_printk(KERN_INFO, ha,
-			   "%s: syfsboot disabled - driver will trigger login"
+			   "%s: syfsboot disabled - driver will trigger login "
 			   "and publish session for discovery .\n", __func__);
 		return QLA_SUCCESS;
 	}
diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c
index ce2d619..2415a6e 100644
--- a/drivers/staging/iio/dac/ad5686.c
+++ b/drivers/staging/iio/dac/ad5686.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
-#include <linux/module.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 6bee490..34b1a3c 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3923,7 +3923,7 @@
  */
 static void enable_loopback(struct slgt_info *info)
 {
-	/* SCR (serial control) BIT2=looopback enable */
+	/* SCR (serial control) BIT2=loopback enable */
 	wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
 
 	if (info->params.mode != MGSL_MODE_ASYNC) {
diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c
index d986824..c053e90 100644
--- a/fs/btrfs/check-integrity.c
+++ b/fs/btrfs/check-integrity.c
@@ -89,7 +89,6 @@
 #include "disk-io.h"
 #include "transaction.h"
 #include "extent_io.h"
-#include "disk-io.h"
 #include "volumes.h"
 #include "print-tree.h"
 #include "locking.h"
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 710ea38..b02e379 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -1068,7 +1068,7 @@
 		spin_unlock(&block_group->lock);
 		ret = 0;
 #ifdef DEBUG
-		printk(KERN_ERR "btrfs: failed to write free space cace "
+		printk(KERN_ERR "btrfs: failed to write free space cache "
 		       "for block group %llu\n", block_group->key.objectid);
 #endif
 	}
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index a2ee8f9..04d51f9 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -257,10 +257,10 @@
 
 	/* Do sanity checks on the superblock */
 	if (super.magic != CRAMFS_MAGIC) {
-		/* check for wrong endianess */
+		/* check for wrong endianness */
 		if (super.magic == CRAMFS_MAGIC_WEND) {
 			if (!silent)
-				printk(KERN_ERR "cramfs: wrong endianess\n");
+				printk(KERN_ERR "cramfs: wrong endianness\n");
 			goto out;
 		}
 
@@ -270,7 +270,7 @@
 		mutex_unlock(&read_mutex);
 		if (super.magic != CRAMFS_MAGIC) {
 			if (super.magic == CRAMFS_MAGIC_WEND && !silent)
-				printk(KERN_ERR "cramfs: wrong endianess\n");
+				printk(KERN_ERR "cramfs: wrong endianness\n");
 			else if (!silent)
 				printk(KERN_ERR "cramfs: wrong magic\n");
 			goto out;
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 5b4a936..77b535a 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -1284,7 +1284,7 @@
 EXPORT_SYMBOL(writeback_inodes_sb_if_idle);
 
 /**
- * writeback_inodes_sb_if_idle	-	start writeback if none underway
+ * writeback_inodes_sb_nr_if_idle	-	start writeback if none underway
  * @sb: the superblock
  * @nr: the number of pages to write
  * @reason: reason why some writeback work was initiated
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index 5b6c9d1..96ed3c9 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -340,7 +340,7 @@
 
 	if (comp->usecount) {
 		spin_unlock(&jffs2_compressor_list_lock);
-		printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
+		printk(KERN_WARNING "JFFS2: Compressor module is in use. Unregister failed.\n");
 		return -1;
 	}
 	list_del(&comp->list);
diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h
index faece71..809c0e6 100644
--- a/fs/ntfs/layout.h
+++ b/fs/ntfs/layout.h
@@ -2008,14 +2008,14 @@
  *
  * When a directory is small enough to fit inside the index root then this
  * is the only attribute describing the directory. When the directory is too
- * large to fit in the index root, on the other hand, two aditional attributes
+ * large to fit in the index root, on the other hand, two additional attributes
  * are present: an index allocation attribute, containing sub-nodes of the B+
  * directory tree (see below), and a bitmap attribute, describing which virtual
  * cluster numbers (vcns) in the index allocation attribute are in use by an
  * index block.
  *
  * NOTE: The root directory (FILE_root) contains an entry for itself. Other
- * dircetories do not contain entries for themselves, though.
+ * directories do not contain entries for themselves, though.
  */
 typedef struct {
 	ATTR_TYPE type;			/* Type of the indexed attribute. Is
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index d245cb2..e5e69af 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -513,7 +513,7 @@
 
 				n = copy_to_user(buffer, (char *)start, tsz);
 				/*
-				 * We cannot distingush between fault on source
+				 * We cannot distinguish between fault on source
 				 * and fault on destination. When this happens
 				 * we clear too and hope it will trigger the
 				 * EFAULT again.
diff --git a/fs/reiserfs/lbalance.c b/fs/reiserfs/lbalance.c
index 03d85cb..b43d015 100644
--- a/fs/reiserfs/lbalance.c
+++ b/fs/reiserfs/lbalance.c
@@ -975,7 +975,7 @@
 	   remove */
 	RFALSE(!is_direntry_le_ih(ih), "10180: item is not directory item");
 	RFALSE(I_ENTRY_COUNT(ih) < from + del_count,
-	       "10185: item contains not enough entries: entry_cout = %d, from = %d, to delete = %d",
+	       "10185: item contains not enough entries: entry_count = %d, from = %d, to delete = %d",
 	       I_ENTRY_COUNT(ih), from, del_count);
 
 	if (del_count == 0)
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 4a24354..923d093 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -236,7 +236,7 @@
 
 /*
  * Rather then using noinline to prevent stack consumption, use
- * noinline_for_stack instead.  For documentaiton reasons.
+ * noinline_for_stack instead.  For documentation reasons.
  */
 #define noinline_for_stack noinline
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d4afd70..b843fe7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -746,28 +746,28 @@
 			       int where, u32 val);
 struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
 
-static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val)
+static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
 {
 	return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
 }
-static inline int pci_read_config_word(struct pci_dev *dev, int where, u16 *val)
+static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
 {
 	return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
 }
-static inline int pci_read_config_dword(struct pci_dev *dev, int where,
+static inline int pci_read_config_dword(const struct pci_dev *dev, int where,
 					u32 *val)
 {
 	return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
 }
-static inline int pci_write_config_byte(struct pci_dev *dev, int where, u8 val)
+static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
 {
 	return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
 }
-static inline int pci_write_config_word(struct pci_dev *dev, int where, u16 val)
+static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
 {
 	return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
 }
-static inline int pci_write_config_dword(struct pci_dev *dev, int where,
+static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
 					 u32 val)
 {
 	return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
diff --git a/include/linux/security.h b/include/linux/security.h
index 83c18e8..c894938 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -812,7 +812,7 @@
  *	Check permissions before connecting or sending datagrams from @sock to
  *	@other.
  *	@sock contains the socket structure.
- *	@sock contains the peer socket structure.
+ *	@other contains the peer socket structure.
  *	Return 0 if permission is granted.
  *
  * The @unix_stream_connect and @unix_may_send hooks were necessary because
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 995b8bf..a2b84f5 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -64,7 +64,7 @@
 	long pages_skipped;		/* Pages which were not written */
 
 	/*
-	 * For a_ops->writepages(): is start or end are non-zero then this is
+	 * For a_ops->writepages(): if start or end are non-zero then this is
 	 * a hint that the filesystem need only write out the pages inside that
 	 * byterange.  The byte at `end' is included in the writeout request.
 	 */
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index 14b3894..cae9a94 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -65,7 +65,6 @@
 	TP_printk("state=%lu", (unsigned long)__entry->state)
 );
 
-/* This code will be removed after deprecation time exceeded (2.6.41) */
 #ifdef CONFIG_EVENT_POWER_TRACING_DEPRECATED
 
 /*
diff --git a/init/main.c b/init/main.c
index 4990f7e..c24805c 100644
--- a/init/main.c
+++ b/init/main.c
@@ -446,8 +446,8 @@
 static void __init mm_init(void)
 {
 	/*
-	 * page_cgroup requires countinous pages as memmap
-	 * and it's bigger than MAX_ORDER unless SPARSEMEM.
+	 * page_cgroup requires contiguous pages,
+	 * bigger than MAX_ORDER unless SPARSEMEM.
 	 */
 	page_cgroup_init_flatmem();
 	mem_init();
diff --git a/kernel/resource.c b/kernel/resource.c
index 7640b3a..7e8ea66 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -749,6 +749,7 @@
 	write_unlock(&resource_lock);
 	return result;
 }
+EXPORT_SYMBOL(adjust_resource);
 
 static void __init __reserve_region_with_split(struct resource *root,
 		resource_size_t start, resource_size_t end,
@@ -792,8 +793,6 @@
 	write_unlock(&resource_lock);
 }
 
-EXPORT_SYMBOL(adjust_resource);
-
 /**
  * resource_alignment - calculate resource's alignment
  * @res: resource pointer
diff --git a/mm/truncate.c b/mm/truncate.c
index 632b15e..a188058 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -184,7 +184,7 @@
 }
 
 /**
- * truncate_inode_pages - truncate range of pages specified by start & end byte offsets
+ * truncate_inode_pages_range - truncate range of pages specified by start & end byte offsets
  * @mapping: mapping to truncate
  * @lstart: offset from which to truncate
  * @lend: offset to which to truncate
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index e29e0ca..8d6d970 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -826,7 +826,7 @@
 
 	if (data_len < sizeof(struct rds_header)) {
 		rds_ib_conn_error(conn, "incoming message "
-		       "from %pI4 didn't inclue a "
+		       "from %pI4 didn't include a "
 		       "header, disconnecting and "
 		       "reconnecting\n",
 		       &conn->c_faddr);
diff --git a/net/rds/iw_recv.c b/net/rds/iw_recv.c
index 5e57347..3c87170 100644
--- a/net/rds/iw_recv.c
+++ b/net/rds/iw_recv.c
@@ -661,7 +661,7 @@
 
 	if (byte_len < sizeof(struct rds_header)) {
 		rds_iw_conn_error(conn, "incoming message "
-		       "from %pI4 didn't inclue a "
+		       "from %pI4 didn't include a "
 		       "header, disconnecting and "
 		       "reconnecting\n",
 		       &conn->c_faddr);
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index d29d6d3..f584f6d 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1643,7 +1643,7 @@
 	pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
 	snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
 			    pinctl);
-	/* on ideapad there is an aditional speaker (subwoofer) to mute */
+	/* on ideapad there is an additional speaker (subwoofer) to mute */
 	if (spec->ideapad)
 		snd_hda_codec_write(codec, 0x1b, 0,
 				    AC_VERB_SET_PIN_WIDGET_CONTROL,
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 9507c4b..758ec2a 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -2601,7 +2601,7 @@
     # read directly what we want to check
     my %config_check;
     open (IN, $output_config)
-	or dodie "faied to open $output_config";
+	or dodie "failed to open $output_config";
 
     while (<IN>) {
 	if (/^((CONFIG\S*)=.*)/) {