[PATCH] sky2: tx/rx ring data structure split
Split Tx and Rx ring into two different data structures.
Tx needs the next value (to handle partial status), and
Rx always needs the mapaddr (to handle resubmitting same buffer).
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index b1a5886..1eefacb 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -958,7 +958,7 @@
if (!sky2->tx_le)
goto err_out;
- sky2->tx_ring = kzalloc(TX_RING_SIZE * sizeof(struct ring_info),
+ sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
GFP_KERNEL);
if (!sky2->tx_ring)
goto err_out;
@@ -970,7 +970,7 @@
goto err_out;
memset(sky2->rx_le, 0, RX_LE_BYTES);
- sky2->rx_ring = kzalloc(sky2->rx_pending * sizeof(struct ring_info),
+ sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info),
GFP_KERNEL);
if (!sky2->rx_ring)
goto err_out;
@@ -1070,7 +1070,7 @@
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
struct sky2_tx_le *le = NULL;
- struct ring_info *re;
+ struct tx_ring_info *re;
unsigned i, len;
dma_addr_t mapping;
u32 addr64;
@@ -1173,11 +1173,11 @@
/* Record the transmit mapping info */
re->skb = skb;
- re->mapaddr = mapping;
+ pci_unmap_addr_set(re, mapaddr, mapping);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- struct ring_info *fre;
+ struct tx_ring_info *fre;
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
@@ -1198,9 +1198,9 @@
fre = sky2->tx_ring
+ ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE;
- fre->skb = NULL;
- fre->mapaddr = mapping;
+ pci_unmap_addr_set(fre, mapaddr, mapping);
}
+
re->idx = sky2->tx_prod;
le->ctrl |= EOP;
@@ -1239,7 +1239,7 @@
spin_lock(&sky2->tx_lock);
while (sky2->tx_cons != done) {
- struct ring_info *re = sky2->tx_ring + sky2->tx_cons;
+ struct tx_ring_info *re = sky2->tx_ring + sky2->tx_cons;
struct sk_buff *skb;
/* Check for partial status */
@@ -1248,15 +1248,17 @@
goto out;
skb = re->skb;
- pci_unmap_single(sky2->hw->pdev, re->mapaddr,
+ pci_unmap_single(sky2->hw->pdev,
+ pci_unmap_addr(re, mapaddr),
skb_headlen(skb), PCI_DMA_TODEVICE);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- struct ring_info *fre;
+ struct tx_ring_info *fre;
fre =
sky2->tx_ring + (sky2->tx_cons + i +
1) % TX_RING_SIZE;
- pci_unmap_page(sky2->hw->pdev, fre->mapaddr,
+ pci_unmap_page(sky2->hw->pdev,
+ pci_unmap_addr(fre, mapaddr),
skb_shinfo(skb)->frags[i].size,
PCI_DMA_TODEVICE);
}
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 1a91c2d..9551892 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1777,10 +1777,15 @@
u8 opcode;
} __attribute((packed));
+struct tx_ring_info {
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(mapaddr);
+ u16 idx;
+};
+
struct ring_info {
struct sk_buff *skb;
dma_addr_t mapaddr;
- u16 idx;
};
struct sky2_port {
@@ -1790,7 +1795,7 @@
u32 msg_enable;
spinlock_t tx_lock ____cacheline_aligned_in_smp;
- struct ring_info *tx_ring;
+ struct tx_ring_info *tx_ring;
struct sky2_tx_le *tx_le;
u16 tx_cons; /* next le to check */
u16 tx_prod; /* next le to use */
