| HopeRF HP03 digital pressure/temperature sensors | |
| Required properties: | |
| - compatible: must be "hoperf,hp03" | |
| - xclr-gpio: must be device tree identifier of the XCLR pin. | |
| The XCLR pin is a reset of the ADC in the chip, | |
| it must be pulled HI before the conversion and | |
| readout of the value from the ADC registers and | |
| pulled LO afterward. | |
| Example: | |
| hp03@0x77 { | |
| compatible = "hoperf,hp03"; | |
| reg = <0x77>; | |
| xclr-gpio = <&portc 0 0x0>; | |
| }; |