/*
 * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "apq8096-db820c-pins.dtsi"
#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>

/ {
	aliases {
		serial0 = &blsp2_uart1;
		serial1 = &blsp2_uart2;
		i2c0	= &blsp1_i2c2;
		i2c1	= &blsp2_i2c1;
		i2c2	= &blsp2_i2c0;
		spi0	= &blsp1_spi0;
		spi1	= &blsp2_spi5;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	soc {
		serial@75b0000 {
			label = "LS-UART1";
			status = "okay";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp2_uart1_2pins_default>;
			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
		};

		serial@75b1000 {
			label = "LS-UART0";
			status = "okay";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp2_uart2_4pins_default>;
			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
		};

		i2c@07577000 {
		/* On Low speed expansion */
			label = "LS-I2C0";
			status = "okay";
		};

		i2c@075b6000 {
		/* On Low speed expansion */
			label = "LS-I2C1";
			status = "okay";
		};

		spi@07575000 {
		/* On Low speed expansion */
			label = "LS-SPI0";
			status = "okay";
		};

		i2c@075b5000 {
		/* On High speed expansion */
			label = "HS-I2C2";
			status = "okay";
		};

		spi@075ba000{
		/* On High speed expansion */
			label = "HS-SPI1";
			status = "okay";
		};

		sdhci@74a4900 {
		/* External SD card */
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
			cd-gpios = <&msmgpio 38 0x1>;
			status = "okay";
		};
	};


	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		autorepeat;

		pinctrl-names = "default";
		pinctrl-0 = <&volume_up_gpio>;

		button@0 {
			label = "Volume Up";
			linux,code = <KEY_VOLUMEUP>;
			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
		};
	};
};