3c59x: Add dma error checking and recovery
Noted that 3c59x has no checks on transmit for failed DMA mappings, and no
ability to unmap fragments when a single map fails in the middle of a transmit.
This patch provides error checking to ensure that dma mappings work properly,
and unrolls an skb mapping if a fragmented skb transmission has a mapping
failure to prevent leaks.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Linux Kernel list <linux-kernel@vger.kernel.org>
CC: "David S. Miller" <davem@davemloft.net>
CC: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 3fe45c7..8ab87ff 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -2129,6 +2129,7 @@
int entry = vp->cur_tx % TX_RING_SIZE;
struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE];
unsigned long flags;
+ dma_addr_t dma_addr;
if (vortex_debug > 6) {
pr_debug("boomerang_start_xmit()\n");
@@ -2163,24 +2164,48 @@
vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum);
if (!skb_shinfo(skb)->nr_frags) {
- vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data,
- skb->len, PCI_DMA_TODEVICE));
+ dma_addr = pci_map_single(VORTEX_PCI(vp), skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr))
+ goto out_dma_err;
+
+ vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr);
vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG);
} else {
int i;
- vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data,
- skb_headlen(skb), PCI_DMA_TODEVICE));
+ dma_addr = pci_map_single(VORTEX_PCI(vp), skb->data,
+ skb_headlen(skb), PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr))
+ goto out_dma_err;
+
+ vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr);
vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb_headlen(skb));
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ dma_addr = skb_frag_dma_map(&VORTEX_PCI(vp)->dev, frag,
+ frag->page_offset,
+ frag->size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr)) {
+ for(i = i-1; i >= 0; i--)
+ dma_unmap_page(&VORTEX_PCI(vp)->dev,
+ le32_to_cpu(vp->tx_ring[entry].frag[i+1].addr),
+ le32_to_cpu(vp->tx_ring[entry].frag[i+1].length),
+ DMA_TO_DEVICE);
+
+ pci_unmap_single(VORTEX_PCI(vp),
+ le32_to_cpu(vp->tx_ring[entry].frag[0].addr),
+ le32_to_cpu(vp->tx_ring[entry].frag[0].length),
+ PCI_DMA_TODEVICE);
+
+ goto out_dma_err;
+ }
+
vp->tx_ring[entry].frag[i+1].addr =
- cpu_to_le32(skb_frag_dma_map(
- &VORTEX_PCI(vp)->dev,
- frag,
- frag->page_offset, frag->size, DMA_TO_DEVICE));
+ cpu_to_le32(dma_addr);
if (i == skb_shinfo(skb)->nr_frags-1)
vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag)|LAST_FRAG);
@@ -2189,7 +2214,10 @@
}
}
#else
- vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE));
+ dma_addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE));
+ if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr))
+ goto out_dma_err;
+ vp->tx_ring[entry].addr = cpu_to_le32(dma_addr);
vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG);
vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
#endif
@@ -2217,7 +2245,11 @@
skb_tx_timestamp(skb);
iowrite16(DownUnstall, ioaddr + EL3_CMD);
spin_unlock_irqrestore(&vp->lock, flags);
+out:
return NETDEV_TX_OK;
+out_dma_err:
+ dev_err(&VORTEX_PCI(vp)->dev, "Error mapping dma buffer\n");
+ goto out;
}
/* The interrupt handler does all of the Rx thread work and cleans up
