| /* | |
| * exynos_adc.c - Support for ADC in EXYNOS SoCs | |
| * | |
| * 8 ~ 10 channel, 10/12-bit ADC | |
| * | |
| * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <linux/clk.h> | |
| #include <linux/completion.h> | |
| #include <linux/of.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/err.h> | |
| #include <linux/input.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/machine.h> | |
| #include <linux/iio/driver.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/regmap.h> | |
| #include <linux/platform_data/touchscreen-s3c2410.h> | |
| /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */ | |
| #define ADC_V1_CON(x) ((x) + 0x00) | |
| #define ADC_V1_TSC(x) ((x) + 0x04) | |
| #define ADC_V1_DLY(x) ((x) + 0x08) | |
| #define ADC_V1_DATX(x) ((x) + 0x0C) | |
| #define ADC_V1_DATY(x) ((x) + 0x10) | |
| #define ADC_V1_UPDN(x) ((x) + 0x14) | |
| #define ADC_V1_INTCLR(x) ((x) + 0x18) | |
| #define ADC_V1_MUX(x) ((x) + 0x1c) | |
| #define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20) | |
| /* S3C2410 ADC registers definitions */ | |
| #define ADC_S3C2410_MUX(x) ((x) + 0x18) | |
| /* Future ADC_V2 registers definitions */ | |
| #define ADC_V2_CON1(x) ((x) + 0x00) | |
| #define ADC_V2_CON2(x) ((x) + 0x04) | |
| #define ADC_V2_STAT(x) ((x) + 0x08) | |
| #define ADC_V2_INT_EN(x) ((x) + 0x10) | |
| #define ADC_V2_INT_ST(x) ((x) + 0x14) | |
| #define ADC_V2_VER(x) ((x) + 0x20) | |
| /* Bit definitions for ADC_V1 */ | |
| #define ADC_V1_CON_RES (1u << 16) | |
| #define ADC_V1_CON_PRSCEN (1u << 14) | |
| #define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) | |
| #define ADC_V1_CON_STANDBY (1u << 2) | |
| /* Bit definitions for S3C2410 ADC */ | |
| #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3) | |
| #define ADC_S3C2410_DATX_MASK 0x3FF | |
| #define ADC_S3C2416_CON_RES_SEL (1u << 3) | |
| /* touch screen always uses channel 0 */ | |
| #define ADC_S3C2410_MUX_TS 0 | |
| /* ADCTSC Register Bits */ | |
| #define ADC_S3C2443_TSC_UD_SEN (1u << 8) | |
| #define ADC_S3C2410_TSC_YM_SEN (1u << 7) | |
| #define ADC_S3C2410_TSC_YP_SEN (1u << 6) | |
| #define ADC_S3C2410_TSC_XM_SEN (1u << 5) | |
| #define ADC_S3C2410_TSC_XP_SEN (1u << 4) | |
| #define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3) | |
| #define ADC_S3C2410_TSC_AUTO_PST (1u << 2) | |
| #define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0) | |
| #define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \ | |
| ADC_S3C2410_TSC_YP_SEN | \ | |
| ADC_S3C2410_TSC_XP_SEN | \ | |
| ADC_S3C2410_TSC_XY_PST(3)) | |
| #define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \ | |
| ADC_S3C2410_TSC_YP_SEN | \ | |
| ADC_S3C2410_TSC_XP_SEN | \ | |
| ADC_S3C2410_TSC_AUTO_PST | \ | |
| ADC_S3C2410_TSC_XY_PST(0)) | |
| /* Bit definitions for ADC_V2 */ | |
| #define ADC_V2_CON1_SOFT_RESET (1u << 2) | |
| #define ADC_V2_CON2_OSEL (1u << 10) | |
| #define ADC_V2_CON2_ESEL (1u << 9) | |
| #define ADC_V2_CON2_HIGHF (1u << 8) | |
| #define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) | |
| #define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) | |
| #define ADC_V2_CON2_ACH_MASK 0xF | |
| #define MAX_ADC_V2_CHANNELS 10 | |
| #define MAX_ADC_V1_CHANNELS 8 | |
| #define MAX_EXYNOS3250_ADC_CHANNELS 2 | |
| /* Bit definitions common for ADC_V1 and ADC_V2 */ | |
| #define ADC_CON_EN_START (1u << 0) | |
| #define ADC_CON_EN_START_MASK (0x3 << 0) | |
| #define ADC_DATX_PRESSED (1u << 15) | |
| #define ADC_DATX_MASK 0xFFF | |
| #define ADC_DATY_MASK 0xFFF | |
| #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) | |
| #define EXYNOS_ADCV1_PHY_OFFSET 0x0718 | |
| #define EXYNOS_ADCV2_PHY_OFFSET 0x0720 | |
| struct exynos_adc { | |
| struct exynos_adc_data *data; | |
| struct device *dev; | |
| struct input_dev *input; | |
| void __iomem *regs; | |
| struct regmap *pmu_map; | |
| struct clk *clk; | |
| struct clk *sclk; | |
| unsigned int irq; | |
| unsigned int tsirq; | |
| unsigned int delay; | |
| struct regulator *vdd; | |
| struct completion completion; | |
| u32 value; | |
| unsigned int version; | |
| bool read_ts; | |
| u32 ts_x; | |
| u32 ts_y; | |
| }; | |
| struct exynos_adc_data { | |
| int num_channels; | |
| bool needs_sclk; | |
| bool needs_adc_phy; | |
| int phy_offset; | |
| u32 mask; | |
| void (*init_hw)(struct exynos_adc *info); | |
| void (*exit_hw)(struct exynos_adc *info); | |
| void (*clear_irq)(struct exynos_adc *info); | |
| void (*start_conv)(struct exynos_adc *info, unsigned long addr); | |
| }; | |
| static void exynos_adc_unprepare_clk(struct exynos_adc *info) | |
| { | |
| if (info->data->needs_sclk) | |
| clk_unprepare(info->sclk); | |
| clk_unprepare(info->clk); | |
| } | |
| static int exynos_adc_prepare_clk(struct exynos_adc *info) | |
| { | |
| int ret; | |
| ret = clk_prepare(info->clk); | |
| if (ret) { | |
| dev_err(info->dev, "failed preparing adc clock: %d\n", ret); | |
| return ret; | |
| } | |
| if (info->data->needs_sclk) { | |
| ret = clk_prepare(info->sclk); | |
| if (ret) { | |
| clk_unprepare(info->clk); | |
| dev_err(info->dev, | |
| "failed preparing sclk_adc clock: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void exynos_adc_disable_clk(struct exynos_adc *info) | |
| { | |
| if (info->data->needs_sclk) | |
| clk_disable(info->sclk); | |
| clk_disable(info->clk); | |
| } | |
| static int exynos_adc_enable_clk(struct exynos_adc *info) | |
| { | |
| int ret; | |
| ret = clk_enable(info->clk); | |
| if (ret) { | |
| dev_err(info->dev, "failed enabling adc clock: %d\n", ret); | |
| return ret; | |
| } | |
| if (info->data->needs_sclk) { | |
| ret = clk_enable(info->sclk); | |
| if (ret) { | |
| clk_disable(info->clk); | |
| dev_err(info->dev, | |
| "failed enabling sclk_adc clock: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void exynos_adc_v1_init_hw(struct exynos_adc *info) | |
| { | |
| u32 con1; | |
| if (info->data->needs_adc_phy) | |
| regmap_write(info->pmu_map, info->data->phy_offset, 1); | |
| /* set default prescaler values and Enable prescaler */ | |
| con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; | |
| /* Enable 12-bit ADC resolution */ | |
| con1 |= ADC_V1_CON_RES; | |
| writel(con1, ADC_V1_CON(info->regs)); | |
| /* set touchscreen delay */ | |
| writel(info->delay, ADC_V1_DLY(info->regs)); | |
| } | |
| static void exynos_adc_v1_exit_hw(struct exynos_adc *info) | |
| { | |
| u32 con; | |
| if (info->data->needs_adc_phy) | |
| regmap_write(info->pmu_map, info->data->phy_offset, 0); | |
| con = readl(ADC_V1_CON(info->regs)); | |
| con |= ADC_V1_CON_STANDBY; | |
| writel(con, ADC_V1_CON(info->regs)); | |
| } | |
| static void exynos_adc_v1_clear_irq(struct exynos_adc *info) | |
| { | |
| writel(1, ADC_V1_INTCLR(info->regs)); | |
| } | |
| static void exynos_adc_v1_start_conv(struct exynos_adc *info, | |
| unsigned long addr) | |
| { | |
| u32 con1; | |
| writel(addr, ADC_V1_MUX(info->regs)); | |
| con1 = readl(ADC_V1_CON(info->regs)); | |
| writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); | |
| } | |
| static const struct exynos_adc_data exynos_adc_v1_data = { | |
| .num_channels = MAX_ADC_V1_CHANNELS, | |
| .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ | |
| .needs_adc_phy = true, | |
| .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, | |
| .init_hw = exynos_adc_v1_init_hw, | |
| .exit_hw = exynos_adc_v1_exit_hw, | |
| .clear_irq = exynos_adc_v1_clear_irq, | |
| .start_conv = exynos_adc_v1_start_conv, | |
| }; | |
| static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info, | |
| unsigned long addr) | |
| { | |
| u32 con1; | |
| /* Enable 12 bit ADC resolution */ | |
| con1 = readl(ADC_V1_CON(info->regs)); | |
| con1 |= ADC_S3C2416_CON_RES_SEL; | |
| writel(con1, ADC_V1_CON(info->regs)); | |
| /* Select channel for S3C2416 */ | |
| writel(addr, ADC_S3C2410_MUX(info->regs)); | |
| con1 = readl(ADC_V1_CON(info->regs)); | |
| writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); | |
| } | |
| static struct exynos_adc_data const exynos_adc_s3c2416_data = { | |
| .num_channels = MAX_ADC_V1_CHANNELS, | |
| .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ | |
| .init_hw = exynos_adc_v1_init_hw, | |
| .exit_hw = exynos_adc_v1_exit_hw, | |
| .start_conv = exynos_adc_s3c2416_start_conv, | |
| }; | |
| static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info, | |
| unsigned long addr) | |
| { | |
| u32 con1; | |
| /* Select channel for S3C2433 */ | |
| writel(addr, ADC_S3C2410_MUX(info->regs)); | |
| con1 = readl(ADC_V1_CON(info->regs)); | |
| writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); | |
| } | |
| static struct exynos_adc_data const exynos_adc_s3c2443_data = { | |
| .num_channels = MAX_ADC_V1_CHANNELS, | |
| .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ | |
| .init_hw = exynos_adc_v1_init_hw, | |
| .exit_hw = exynos_adc_v1_exit_hw, | |
| .start_conv = exynos_adc_s3c2443_start_conv, | |
| }; | |
| static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info, | |
| unsigned long addr) | |
| { | |
| u32 con1; | |
| con1 = readl(ADC_V1_CON(info->regs)); | |
| con1 &= ~ADC_S3C2410_CON_SELMUX(0x7); | |
| con1 |= ADC_S3C2410_CON_SELMUX(addr); | |
| writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); | |
| } | |
| static struct exynos_adc_data const exynos_adc_s3c24xx_data = { | |
| .num_channels = MAX_ADC_V1_CHANNELS, | |
| .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ | |
| .init_hw = exynos_adc_v1_init_hw, | |
| .exit_hw = exynos_adc_v1_exit_hw, | |
| .start_conv = exynos_adc_s3c64xx_start_conv, | |
| }; | |
| static struct exynos_adc_data const exynos_adc_s3c64xx_data = { | |
| .num_channels = MAX_ADC_V1_CHANNELS, | |
| .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ | |
| .init_hw = exynos_adc_v1_init_hw, | |
| .exit_hw = exynos_adc_v1_exit_hw, | |
| .clear_irq = exynos_adc_v1_clear_irq, | |
| .start_conv = exynos_adc_s3c64xx_start_conv, | |
| }; | |
| static void exynos_adc_v2_init_hw(struct exynos_adc *info) | |
| { | |
| u32 con1, con2; | |
| if (info->data->needs_adc_phy) | |
| regmap_write(info->pmu_map, info->data->phy_offset, 1); | |
| con1 = ADC_V2_CON1_SOFT_RESET; | |
| writel(con1, ADC_V2_CON1(info->regs)); | |
| con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | | |
| ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); | |
| writel(con2, ADC_V2_CON2(info->regs)); | |
| /* Enable interrupts */ | |
| writel(1, ADC_V2_INT_EN(info->regs)); | |
| } | |
| static void exynos_adc_v2_exit_hw(struct exynos_adc *info) | |
| { | |
| u32 con; | |
| if (info->data->needs_adc_phy) | |
| regmap_write(info->pmu_map, info->data->phy_offset, 0); | |
| con = readl(ADC_V2_CON1(info->regs)); | |
| con &= ~ADC_CON_EN_START; | |
| writel(con, ADC_V2_CON1(info->regs)); | |
| } | |
| static void exynos_adc_v2_clear_irq(struct exynos_adc *info) | |
| { | |
| writel(1, ADC_V2_INT_ST(info->regs)); | |
| } | |
| static void exynos_adc_v2_start_conv(struct exynos_adc *info, | |
| unsigned long addr) | |
| { | |
| u32 con1, con2; | |
| con2 = readl(ADC_V2_CON2(info->regs)); | |
| con2 &= ~ADC_V2_CON2_ACH_MASK; | |
| con2 |= ADC_V2_CON2_ACH_SEL(addr); | |
| writel(con2, ADC_V2_CON2(info->regs)); | |
| con1 = readl(ADC_V2_CON1(info->regs)); | |
| writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs)); | |
| } | |
| static const struct exynos_adc_data exynos_adc_v2_data = { | |
| .num_channels = MAX_ADC_V2_CHANNELS, | |
| .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ | |
| .needs_adc_phy = true, | |
| .phy_offset = EXYNOS_ADCV2_PHY_OFFSET, | |
| .init_hw = exynos_adc_v2_init_hw, | |
| .exit_hw = exynos_adc_v2_exit_hw, | |
| .clear_irq = exynos_adc_v2_clear_irq, | |
| .start_conv = exynos_adc_v2_start_conv, | |
| }; | |
| static const struct exynos_adc_data exynos3250_adc_data = { | |
| .num_channels = MAX_EXYNOS3250_ADC_CHANNELS, | |
| .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ | |
| .needs_sclk = true, | |
| .needs_adc_phy = true, | |
| .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, | |
| .init_hw = exynos_adc_v2_init_hw, | |
| .exit_hw = exynos_adc_v2_exit_hw, | |
| .clear_irq = exynos_adc_v2_clear_irq, | |
| .start_conv = exynos_adc_v2_start_conv, | |
| }; | |
| static void exynos_adc_exynos7_init_hw(struct exynos_adc *info) | |
| { | |
| u32 con1, con2; | |
| if (info->data->needs_adc_phy) | |
| regmap_write(info->pmu_map, info->data->phy_offset, 1); | |
| con1 = ADC_V2_CON1_SOFT_RESET; | |
| writel(con1, ADC_V2_CON1(info->regs)); | |
| con2 = readl(ADC_V2_CON2(info->regs)); | |
| con2 &= ~ADC_V2_CON2_C_TIME(7); | |
| con2 |= ADC_V2_CON2_C_TIME(0); | |
| writel(con2, ADC_V2_CON2(info->regs)); | |
| /* Enable interrupts */ | |
| writel(1, ADC_V2_INT_EN(info->regs)); | |
| } | |
| static const struct exynos_adc_data exynos7_adc_data = { | |
| .num_channels = MAX_ADC_V1_CHANNELS, | |
| .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ | |
| .init_hw = exynos_adc_exynos7_init_hw, | |
| .exit_hw = exynos_adc_v2_exit_hw, | |
| .clear_irq = exynos_adc_v2_clear_irq, | |
| .start_conv = exynos_adc_v2_start_conv, | |
| }; | |
| static const struct of_device_id exynos_adc_match[] = { | |
| { | |
| .compatible = "samsung,s3c2410-adc", | |
| .data = &exynos_adc_s3c24xx_data, | |
| }, { | |
| .compatible = "samsung,s3c2416-adc", | |
| .data = &exynos_adc_s3c2416_data, | |
| }, { | |
| .compatible = "samsung,s3c2440-adc", | |
| .data = &exynos_adc_s3c24xx_data, | |
| }, { | |
| .compatible = "samsung,s3c2443-adc", | |
| .data = &exynos_adc_s3c2443_data, | |
| }, { | |
| .compatible = "samsung,s3c6410-adc", | |
| .data = &exynos_adc_s3c64xx_data, | |
| }, { | |
| .compatible = "samsung,exynos-adc-v1", | |
| .data = &exynos_adc_v1_data, | |
| }, { | |
| .compatible = "samsung,exynos-adc-v2", | |
| .data = &exynos_adc_v2_data, | |
| }, { | |
| .compatible = "samsung,exynos3250-adc", | |
| .data = &exynos3250_adc_data, | |
| }, { | |
| .compatible = "samsung,exynos7-adc", | |
| .data = &exynos7_adc_data, | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, exynos_adc_match); | |
| static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev) | |
| { | |
| const struct of_device_id *match; | |
| match = of_match_node(exynos_adc_match, pdev->dev.of_node); | |
| return (struct exynos_adc_data *)match->data; | |
| } | |
| static int exynos_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int *val, | |
| int *val2, | |
| long mask) | |
| { | |
| struct exynos_adc *info = iio_priv(indio_dev); | |
| unsigned long timeout; | |
| int ret; | |
| if (mask != IIO_CHAN_INFO_RAW) | |
| return -EINVAL; | |
| mutex_lock(&indio_dev->mlock); | |
| reinit_completion(&info->completion); | |
| /* Select the channel to be used and Trigger conversion */ | |
| if (info->data->start_conv) | |
| info->data->start_conv(info, chan->address); | |
| timeout = wait_for_completion_timeout(&info->completion, | |
| EXYNOS_ADC_TIMEOUT); | |
| if (timeout == 0) { | |
| dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); | |
| if (info->data->init_hw) | |
| info->data->init_hw(info); | |
| ret = -ETIMEDOUT; | |
| } else { | |
| *val = info->value; | |
| *val2 = 0; | |
| ret = IIO_VAL_INT; | |
| } | |
| mutex_unlock(&indio_dev->mlock); | |
| return ret; | |
| } | |
| static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y) | |
| { | |
| struct exynos_adc *info = iio_priv(indio_dev); | |
| unsigned long timeout; | |
| int ret; | |
| mutex_lock(&indio_dev->mlock); | |
| info->read_ts = true; | |
| reinit_completion(&info->completion); | |
| writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST, | |
| ADC_V1_TSC(info->regs)); | |
| /* Select the ts channel to be used and Trigger conversion */ | |
| info->data->start_conv(info, ADC_S3C2410_MUX_TS); | |
| timeout = wait_for_completion_timeout(&info->completion, | |
| EXYNOS_ADC_TIMEOUT); | |
| if (timeout == 0) { | |
| dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); | |
| if (info->data->init_hw) | |
| info->data->init_hw(info); | |
| ret = -ETIMEDOUT; | |
| } else { | |
| *x = info->ts_x; | |
| *y = info->ts_y; | |
| ret = 0; | |
| } | |
| info->read_ts = false; | |
| mutex_unlock(&indio_dev->mlock); | |
| return ret; | |
| } | |
| static irqreturn_t exynos_adc_isr(int irq, void *dev_id) | |
| { | |
| struct exynos_adc *info = dev_id; | |
| u32 mask = info->data->mask; | |
| /* Read value */ | |
| if (info->read_ts) { | |
| info->ts_x = readl(ADC_V1_DATX(info->regs)); | |
| info->ts_y = readl(ADC_V1_DATY(info->regs)); | |
| writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs)); | |
| } else { | |
| info->value = readl(ADC_V1_DATX(info->regs)) & mask; | |
| } | |
| /* clear irq */ | |
| if (info->data->clear_irq) | |
| info->data->clear_irq(info); | |
| complete(&info->completion); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Here we (ab)use a threaded interrupt handler to stay running | |
| * for as long as the touchscreen remains pressed, we report | |
| * a new event with the latest data and then sleep until the | |
| * next timer tick. This mirrors the behavior of the old | |
| * driver, with much less code. | |
| */ | |
| static irqreturn_t exynos_ts_isr(int irq, void *dev_id) | |
| { | |
| struct exynos_adc *info = dev_id; | |
| struct iio_dev *dev = dev_get_drvdata(info->dev); | |
| u32 x, y; | |
| bool pressed; | |
| int ret; | |
| while (info->input->users) { | |
| ret = exynos_read_s3c64xx_ts(dev, &x, &y); | |
| if (ret == -ETIMEDOUT) | |
| break; | |
| pressed = x & y & ADC_DATX_PRESSED; | |
| if (!pressed) { | |
| input_report_key(info->input, BTN_TOUCH, 0); | |
| input_sync(info->input); | |
| break; | |
| } | |
| input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK); | |
| input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK); | |
| input_report_key(info->input, BTN_TOUCH, 1); | |
| input_sync(info->input); | |
| usleep_range(1000, 1100); | |
| }; | |
| writel(0, ADC_V1_CLRINTPNDNUP(info->regs)); | |
| return IRQ_HANDLED; | |
| } | |
| static int exynos_adc_reg_access(struct iio_dev *indio_dev, | |
| unsigned reg, unsigned writeval, | |
| unsigned *readval) | |
| { | |
| struct exynos_adc *info = iio_priv(indio_dev); | |
| if (readval == NULL) | |
| return -EINVAL; | |
| *readval = readl(info->regs + reg); | |
| return 0; | |
| } | |
| static const struct iio_info exynos_adc_iio_info = { | |
| .read_raw = &exynos_read_raw, | |
| .debugfs_reg_access = &exynos_adc_reg_access, | |
| .driver_module = THIS_MODULE, | |
| }; | |
| #define ADC_CHANNEL(_index, _id) { \ | |
| .type = IIO_VOLTAGE, \ | |
| .indexed = 1, \ | |
| .channel = _index, \ | |
| .address = _index, \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ | |
| .datasheet_name = _id, \ | |
| } | |
| static const struct iio_chan_spec exynos_adc_iio_channels[] = { | |
| ADC_CHANNEL(0, "adc0"), | |
| ADC_CHANNEL(1, "adc1"), | |
| ADC_CHANNEL(2, "adc2"), | |
| ADC_CHANNEL(3, "adc3"), | |
| ADC_CHANNEL(4, "adc4"), | |
| ADC_CHANNEL(5, "adc5"), | |
| ADC_CHANNEL(6, "adc6"), | |
| ADC_CHANNEL(7, "adc7"), | |
| ADC_CHANNEL(8, "adc8"), | |
| ADC_CHANNEL(9, "adc9"), | |
| }; | |
| static int exynos_adc_remove_devices(struct device *dev, void *c) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| platform_device_unregister(pdev); | |
| return 0; | |
| } | |
| static int exynos_adc_ts_open(struct input_dev *dev) | |
| { | |
| struct exynos_adc *info = input_get_drvdata(dev); | |
| enable_irq(info->tsirq); | |
| return 0; | |
| } | |
| static void exynos_adc_ts_close(struct input_dev *dev) | |
| { | |
| struct exynos_adc *info = input_get_drvdata(dev); | |
| disable_irq(info->tsirq); | |
| } | |
| static int exynos_adc_ts_init(struct exynos_adc *info) | |
| { | |
| int ret; | |
| if (info->tsirq <= 0) | |
| return -ENODEV; | |
| info->input = input_allocate_device(); | |
| if (!info->input) | |
| return -ENOMEM; | |
| info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); | |
| info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); | |
| input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0); | |
| input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0); | |
| info->input->name = "S3C24xx TouchScreen"; | |
| info->input->id.bustype = BUS_HOST; | |
| info->input->open = exynos_adc_ts_open; | |
| info->input->close = exynos_adc_ts_close; | |
| input_set_drvdata(info->input, info); | |
| ret = input_register_device(info->input); | |
| if (ret) { | |
| input_free_device(info->input); | |
| return ret; | |
| } | |
| disable_irq(info->tsirq); | |
| ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr, | |
| IRQF_ONESHOT, "touchscreen", info); | |
| if (ret) | |
| input_unregister_device(info->input); | |
| return ret; | |
| } | |
| static int exynos_adc_probe(struct platform_device *pdev) | |
| { | |
| struct exynos_adc *info = NULL; | |
| struct device_node *np = pdev->dev.of_node; | |
| struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev); | |
| struct iio_dev *indio_dev = NULL; | |
| struct resource *mem; | |
| bool has_ts = false; | |
| int ret = -ENODEV; | |
| int irq; | |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc)); | |
| if (!indio_dev) { | |
| dev_err(&pdev->dev, "failed allocating iio device\n"); | |
| return -ENOMEM; | |
| } | |
| info = iio_priv(indio_dev); | |
| info->data = exynos_adc_get_data(pdev); | |
| if (!info->data) { | |
| dev_err(&pdev->dev, "failed getting exynos_adc_data\n"); | |
| return -EINVAL; | |
| } | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| info->regs = devm_ioremap_resource(&pdev->dev, mem); | |
| if (IS_ERR(info->regs)) | |
| return PTR_ERR(info->regs); | |
| if (info->data->needs_adc_phy) { | |
| info->pmu_map = syscon_regmap_lookup_by_phandle( | |
| pdev->dev.of_node, | |
| "samsung,syscon-phandle"); | |
| if (IS_ERR(info->pmu_map)) { | |
| dev_err(&pdev->dev, "syscon regmap lookup failed.\n"); | |
| return PTR_ERR(info->pmu_map); | |
| } | |
| } | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) { | |
| dev_err(&pdev->dev, "no irq resource?\n"); | |
| return irq; | |
| } | |
| info->irq = irq; | |
| irq = platform_get_irq(pdev, 1); | |
| if (irq == -EPROBE_DEFER) | |
| return irq; | |
| info->tsirq = irq; | |
| info->dev = &pdev->dev; | |
| init_completion(&info->completion); | |
| info->clk = devm_clk_get(&pdev->dev, "adc"); | |
| if (IS_ERR(info->clk)) { | |
| dev_err(&pdev->dev, "failed getting clock, err = %ld\n", | |
| PTR_ERR(info->clk)); | |
| return PTR_ERR(info->clk); | |
| } | |
| if (info->data->needs_sclk) { | |
| info->sclk = devm_clk_get(&pdev->dev, "sclk"); | |
| if (IS_ERR(info->sclk)) { | |
| dev_err(&pdev->dev, | |
| "failed getting sclk clock, err = %ld\n", | |
| PTR_ERR(info->sclk)); | |
| return PTR_ERR(info->sclk); | |
| } | |
| } | |
| info->vdd = devm_regulator_get(&pdev->dev, "vdd"); | |
| if (IS_ERR(info->vdd)) { | |
| dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", | |
| PTR_ERR(info->vdd)); | |
| return PTR_ERR(info->vdd); | |
| } | |
| ret = regulator_enable(info->vdd); | |
| if (ret) | |
| return ret; | |
| ret = exynos_adc_prepare_clk(info); | |
| if (ret) | |
| goto err_disable_reg; | |
| ret = exynos_adc_enable_clk(info); | |
| if (ret) | |
| goto err_unprepare_clk; | |
| platform_set_drvdata(pdev, indio_dev); | |
| indio_dev->name = dev_name(&pdev->dev); | |
| indio_dev->dev.parent = &pdev->dev; | |
| indio_dev->dev.of_node = pdev->dev.of_node; | |
| indio_dev->info = &exynos_adc_iio_info; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->channels = exynos_adc_iio_channels; | |
| indio_dev->num_channels = info->data->num_channels; | |
| ret = request_irq(info->irq, exynos_adc_isr, | |
| 0, dev_name(&pdev->dev), info); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", | |
| info->irq); | |
| goto err_disable_clk; | |
| } | |
| ret = iio_device_register(indio_dev); | |
| if (ret) | |
| goto err_irq; | |
| if (info->data->init_hw) | |
| info->data->init_hw(info); | |
| /* leave out any TS related code if unreachable */ | |
| if (IS_REACHABLE(CONFIG_INPUT)) { | |
| has_ts = of_property_read_bool(pdev->dev.of_node, | |
| "has-touchscreen") || pdata; | |
| } | |
| if (pdata) | |
| info->delay = pdata->delay; | |
| else | |
| info->delay = 10000; | |
| if (has_ts) | |
| ret = exynos_adc_ts_init(info); | |
| if (ret) | |
| goto err_iio; | |
| ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed adding child nodes\n"); | |
| goto err_of_populate; | |
| } | |
| return 0; | |
| err_of_populate: | |
| device_for_each_child(&indio_dev->dev, NULL, | |
| exynos_adc_remove_devices); | |
| if (has_ts) { | |
| input_unregister_device(info->input); | |
| free_irq(info->tsirq, info); | |
| } | |
| err_iio: | |
| iio_device_unregister(indio_dev); | |
| err_irq: | |
| free_irq(info->irq, info); | |
| err_disable_clk: | |
| if (info->data->exit_hw) | |
| info->data->exit_hw(info); | |
| exynos_adc_disable_clk(info); | |
| err_unprepare_clk: | |
| exynos_adc_unprepare_clk(info); | |
| err_disable_reg: | |
| regulator_disable(info->vdd); | |
| return ret; | |
| } | |
| static int exynos_adc_remove(struct platform_device *pdev) | |
| { | |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); | |
| struct exynos_adc *info = iio_priv(indio_dev); | |
| if (IS_REACHABLE(CONFIG_INPUT)) { | |
| free_irq(info->tsirq, info); | |
| input_unregister_device(info->input); | |
| } | |
| device_for_each_child(&indio_dev->dev, NULL, | |
| exynos_adc_remove_devices); | |
| iio_device_unregister(indio_dev); | |
| free_irq(info->irq, info); | |
| if (info->data->exit_hw) | |
| info->data->exit_hw(info); | |
| exynos_adc_disable_clk(info); | |
| exynos_adc_unprepare_clk(info); | |
| regulator_disable(info->vdd); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int exynos_adc_suspend(struct device *dev) | |
| { | |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); | |
| struct exynos_adc *info = iio_priv(indio_dev); | |
| if (info->data->exit_hw) | |
| info->data->exit_hw(info); | |
| exynos_adc_disable_clk(info); | |
| regulator_disable(info->vdd); | |
| return 0; | |
| } | |
| static int exynos_adc_resume(struct device *dev) | |
| { | |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); | |
| struct exynos_adc *info = iio_priv(indio_dev); | |
| int ret; | |
| ret = regulator_enable(info->vdd); | |
| if (ret) | |
| return ret; | |
| ret = exynos_adc_enable_clk(info); | |
| if (ret) | |
| return ret; | |
| if (info->data->init_hw) | |
| info->data->init_hw(info); | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, | |
| exynos_adc_suspend, | |
| exynos_adc_resume); | |
| static struct platform_driver exynos_adc_driver = { | |
| .probe = exynos_adc_probe, | |
| .remove = exynos_adc_remove, | |
| .driver = { | |
| .name = "exynos-adc", | |
| .of_match_table = exynos_adc_match, | |
| .pm = &exynos_adc_pm_ops, | |
| }, | |
| }; | |
| module_platform_driver(exynos_adc_driver); | |
| MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>"); | |
| MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); | |
| MODULE_LICENSE("GPL v2"); |