| /****************************************************************************** |
| * |
| * Copyright(c) 2016 Realtek Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| *****************************************************************************/ |
| |
| #include "../wifi.h" |
| #include "../efuse.h" |
| #include "../base.h" |
| #include "../regd.h" |
| #include "../cam.h" |
| #include "../ps.h" |
| #include "../pci.h" |
| #include "reg.h" |
| #include "def.h" |
| #include "phy.h" |
| #include "fw.h" |
| #include "led.h" |
| #include "hw.h" |
| |
| #define LLT_CONFIG 5 |
| |
| u8 rtl_channel5g[CHANNEL_MAX_NUMBER_5G] = { |
| 36, 38, 40, 42, 44, 46, 48, /* Band 1 */ |
| 52, 54, 56, 58, 60, 62, 64, /* Band 2 */ |
| 100, 102, 104, 106, 108, 110, 112, /* Band 3 */ |
| 116, 118, 120, 122, 124, 126, 128, /* Band 3 */ |
| 132, 134, 136, 138, 140, 142, 144, /* Band 3 */ |
| 149, 151, 153, 155, 157, 159, 161, /* Band 4 */ |
| 165, 167, 169, 171, 173, 175, 177}; /* Band 4 */ |
| u8 rtl_channel5g_80m[CHANNEL_MAX_NUMBER_5G_80M] = {42, 58, 106, 122, |
| 138, 155, 171}; |
| |
| static void _rtl8822be_set_bcn_ctrl_reg(struct ieee80211_hw *hw, u8 set_bits, |
| u8 clear_bits) |
| { |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| rtlpci->reg_bcn_ctrl_val |= set_bits; |
| rtlpci->reg_bcn_ctrl_val &= ~clear_bits; |
| |
| rtl_write_byte(rtlpriv, REG_BCN_CTRL_8822B, |
| (u8)rtlpci->reg_bcn_ctrl_val); |
| } |
| |
| static void _rtl8822be_stop_tx_beacon(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 tmp; |
| |
| tmp = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL_8822B + 2); |
| rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL_8822B + 2, tmp & (~BIT(6))); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT_8822B + 1, 0x64); |
| tmp = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT_8822B + 2); |
| tmp &= ~(BIT(0)); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT_8822B + 2, tmp); |
| } |
| |
| static void _rtl8822be_resume_tx_beacon(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 tmp; |
| |
| tmp = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL_8822B + 2); |
| rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL_8822B + 2, tmp | BIT(6)); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT_8822B + 1, 0xff); |
| tmp = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT_8822B + 2); |
| tmp |= BIT(0); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT_8822B + 2, tmp); |
| } |
| |
| static void _rtl8822be_enable_bcn_sub_func(struct ieee80211_hw *hw) |
| { |
| _rtl8822be_set_bcn_ctrl_reg(hw, 0, BIT(1)); |
| } |
| |
| static void _rtl8822be_disable_bcn_sub_func(struct ieee80211_hw *hw) |
| { |
| _rtl8822be_set_bcn_ctrl_reg(hw, BIT(1), 0); |
| } |
| |
| static void _rtl8822be_set_fw_clock_on(struct ieee80211_hw *hw, u8 rpwm_val, |
| bool b_need_turn_off_ckk) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u32 count = 0, isr_regaddr, content; |
| bool b_schedule_timer = b_need_turn_off_ckk; |
| |
| if (!rtlhal->fw_ready) |
| return; |
| if (!rtlpriv->psc.fw_current_inpsmode) |
| return; |
| |
| while (1) { |
| spin_lock_bh(&rtlpriv->locks.fw_ps_lock); |
| if (rtlhal->fw_clk_change_in_progress) { |
| while (rtlhal->fw_clk_change_in_progress) { |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| count++; |
| udelay(100); |
| if (count > 1000) |
| return; |
| spin_lock_bh(&rtlpriv->locks.fw_ps_lock); |
| } |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| } else { |
| rtlhal->fw_clk_change_in_progress = false; |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| break; |
| } |
| } |
| |
| if (IS_IN_LOW_POWER_STATE_8822B(rtlhal->fw_ps_state)) { |
| rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_SET_RPWM, |
| (u8 *)(&rpwm_val)); |
| if (FW_PS_IS_ACK(rpwm_val)) { |
| isr_regaddr = REG_HISR0_8822B; |
| content = rtl_read_dword(rtlpriv, isr_regaddr); |
| while (!(content & IMR_CPWM) && (count < 500)) { |
| udelay(50); |
| count++; |
| content = rtl_read_dword(rtlpriv, isr_regaddr); |
| } |
| |
| if (content & IMR_CPWM) { |
| rtl_write_word(rtlpriv, isr_regaddr, 0x0100); |
| rtlhal->fw_ps_state = FW_PS_STATE_RF_ON_8822B; |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, |
| "Receive CPWM INT!!! PSState = %X\n", |
| rtlhal->fw_ps_state); |
| } |
| } |
| |
| spin_lock_bh(&rtlpriv->locks.fw_ps_lock); |
| rtlhal->fw_clk_change_in_progress = false; |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| if (b_schedule_timer) { |
| mod_timer(&rtlpriv->works.fw_clockoff_timer, |
| jiffies + MSECS(10)); |
| } |
| |
| } else { |
| spin_lock_bh(&rtlpriv->locks.fw_ps_lock); |
| rtlhal->fw_clk_change_in_progress = false; |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| } |
| } |
| |
| static void _rtl8822be_set_fw_clock_off(struct ieee80211_hw *hw, u8 rpwm_val) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| struct rtl8192_tx_ring *ring; |
| enum rf_pwrstate rtstate; |
| bool b_schedule_timer = false; |
| u8 queue; |
| |
| if (!rtlhal->fw_ready) |
| return; |
| if (!rtlpriv->psc.fw_current_inpsmode) |
| return; |
| if (!rtlhal->allow_sw_to_change_hwclc) |
| return; |
| |
| rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE, (u8 *)(&rtstate)); |
| if (rtstate == ERFOFF || rtlpriv->psc.inactive_pwrstate == ERFOFF) |
| return; |
| |
| for (queue = 0; queue < RTL_PCI_MAX_TX_QUEUE_COUNT; queue++) { |
| ring = &rtlpci->tx_ring[queue]; |
| if (skb_queue_len(&ring->queue)) { |
| b_schedule_timer = true; |
| break; |
| } |
| } |
| |
| if (b_schedule_timer) { |
| mod_timer(&rtlpriv->works.fw_clockoff_timer, |
| jiffies + MSECS(10)); |
| return; |
| } |
| |
| if (FW_PS_STATE(rtlhal->fw_ps_state) != FW_PS_STATE_RF_OFF_LOW_PWR) { |
| spin_lock_bh(&rtlpriv->locks.fw_ps_lock); |
| if (!rtlhal->fw_clk_change_in_progress) { |
| rtlhal->fw_clk_change_in_progress = true; |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| rtlhal->fw_ps_state = FW_PS_STATE(rpwm_val); |
| rtl_write_word(rtlpriv, REG_HISR0_8822B, 0x0100); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, |
| (u8 *)(&rpwm_val)); |
| spin_lock_bh(&rtlpriv->locks.fw_ps_lock); |
| rtlhal->fw_clk_change_in_progress = false; |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| } else { |
| spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); |
| mod_timer(&rtlpriv->works.fw_clockoff_timer, |
| jiffies + MSECS(10)); |
| } |
| } |
| } |
| |
| static void _rtl8822be_set_fw_ps_rf_on(struct ieee80211_hw *hw) |
| { |
| u8 rpwm_val = 0; |
| |
| rpwm_val |= (FW_PS_STATE_RF_OFF_8822B | FW_PS_ACK); |
| _rtl8822be_set_fw_clock_on(hw, rpwm_val, true); |
| } |
| |
| static void _rtl8822be_set_fw_ps_rf_off_low_power(struct ieee80211_hw *hw) |
| { |
| u8 rpwm_val = 0; |
| |
| rpwm_val |= FW_PS_STATE_RF_OFF_LOW_PWR; |
| _rtl8822be_set_fw_clock_off(hw, rpwm_val); |
| } |
| |
| void rtl8822be_fw_clk_off_timer_callback(unsigned long data) |
| { |
| struct ieee80211_hw *hw = (struct ieee80211_hw *)data; |
| |
| _rtl8822be_set_fw_ps_rf_off_low_power(hw); |
| } |
| |
| static void _rtl8822be_fwlps_leave(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| bool fw_current_inps = false; |
| u8 rpwm_val = 0, fw_pwrmode = FW_PS_ACTIVE_MODE; |
| |
| if (ppsc->low_power_enable) { |
| rpwm_val = (FW_PS_STATE_ALL_ON_8822B | FW_PS_ACK); /* RF on */ |
| _rtl8822be_set_fw_clock_on(hw, rpwm_val, false); |
| rtlhal->allow_sw_to_change_hwclc = false; |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE, |
| (u8 *)(&fw_pwrmode)); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS, |
| (u8 *)(&fw_current_inps)); |
| } else { |
| rpwm_val = FW_PS_STATE_ALL_ON_8822B; /* RF on */ |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, |
| (u8 *)(&rpwm_val)); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE, |
| (u8 *)(&fw_pwrmode)); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS, |
| (u8 *)(&fw_current_inps)); |
| } |
| } |
| |
| static void _rtl8822be_fwlps_enter(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| bool fw_current_inps = true; |
| u8 rpwm_val; |
| |
| if (ppsc->low_power_enable) { |
| rpwm_val = FW_PS_STATE_RF_OFF_LOW_PWR; /* RF off */ |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS, |
| (u8 *)(&fw_current_inps)); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE, |
| (u8 *)(&ppsc->fwctrl_psmode)); |
| rtlhal->allow_sw_to_change_hwclc = true; |
| _rtl8822be_set_fw_clock_off(hw, rpwm_val); |
| } else { |
| rpwm_val = FW_PS_STATE_RF_OFF_8822B; /* RF off */ |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS, |
| (u8 *)(&fw_current_inps)); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE, |
| (u8 *)(&ppsc->fwctrl_psmode)); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, |
| (u8 *)(&rpwm_val)); |
| } |
| } |
| |
| void rtl8822be_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| |
| switch (variable) { |
| case HW_VAR_RCR: |
| *((u32 *)(val)) = rtlpci->receive_config; |
| break; |
| case HW_VAR_RF_STATE: |
| *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state; |
| break; |
| case HW_VAR_FWLPS_RF_ON: { |
| enum rf_pwrstate rf_state; |
| u32 val_rcr; |
| |
| rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE, |
| (u8 *)(&rf_state)); |
| if (rf_state == ERFOFF) { |
| *((bool *)(val)) = true; |
| } else { |
| val_rcr = rtl_read_dword(rtlpriv, REG_RCR_8822B); |
| val_rcr &= 0x00070000; |
| if (val_rcr) |
| *((bool *)(val)) = false; |
| else |
| *((bool *)(val)) = true; |
| } |
| } break; |
| case HW_VAR_FW_PSMODE_STATUS: |
| *((bool *)(val)) = ppsc->fw_current_inpsmode; |
| break; |
| case HW_VAR_CORRECT_TSF: { |
| u64 tsf; |
| u32 *ptsf_low = (u32 *)&tsf; |
| u32 *ptsf_high = ((u32 *)&tsf) + 1; |
| |
| *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR_8822B + 4)); |
| *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR_8822B); |
| |
| *((u64 *)(val)) = tsf; |
| |
| } break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG, |
| "switch case not process %x\n", variable); |
| break; |
| } |
| } |
| |
| static void _rtl8822be_download_rsvd_page(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 tmp_regcr, tmp_reg422; |
| u8 bcnvalid_reg /*, txbc_reg*/; |
| u8 count = 0, dlbcn_count = 0; |
| bool b_recover = false; |
| |
| /*Set REG_CR_8822B bit 8. DMA beacon by SW.*/ |
| tmp_regcr = rtl_read_byte(rtlpriv, REG_CR_8822B + 1); |
| rtl_write_byte(rtlpriv, REG_CR_8822B + 1, tmp_regcr | BIT(0)); |
| |
| /* Disable Hw protection for a time which revserd for Hw sending beacon. |
| * Fix download reserved page packet fail |
| * that access collision with the protection time. |
| * 2010.05.11. Added by tynli. |
| */ |
| _rtl8822be_set_bcn_ctrl_reg(hw, 0, BIT(3)); |
| _rtl8822be_set_bcn_ctrl_reg(hw, BIT(4), 0); |
| |
| /* Set FWHW_TXQ_CTRL 0x422[6]=0 to |
| * tell Hw the packet is not a real beacon frame. |
| */ |
| tmp_reg422 = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL_8822B + 2); |
| rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL_8822B + 2, |
| tmp_reg422 & (~BIT(6))); |
| |
| if (tmp_reg422 & BIT(6)) |
| b_recover = true; |
| |
| do { |
| /* Clear beacon valid check bit */ |
| bcnvalid_reg = |
| rtl_read_byte(rtlpriv, REG_FIFOPAGE_CTRL_2_8822B + 1); |
| bcnvalid_reg = bcnvalid_reg | BIT(7); |
| rtl_write_byte(rtlpriv, REG_FIFOPAGE_CTRL_2_8822B + 1, |
| bcnvalid_reg); |
| |
| /* download rsvd page */ |
| rtl8822be_set_fw_rsvdpagepkt(hw, false); |
| |
| /* check rsvd page download OK. */ |
| bcnvalid_reg = |
| rtl_read_byte(rtlpriv, REG_FIFOPAGE_CTRL_2_8822B + 1); |
| |
| count = 0; |
| while (!(BIT(7) & bcnvalid_reg) && count < 20) { |
| count++; |
| udelay(50); |
| bcnvalid_reg = rtl_read_byte( |
| rtlpriv, REG_FIFOPAGE_CTRL_2_8822B + 1); |
| } |
| |
| dlbcn_count++; |
| } while (!(BIT(7) & bcnvalid_reg) && dlbcn_count < 5); |
| |
| if (!(BIT(7) & bcnvalid_reg)) |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_WARNING, |
| "Download RSVD page failed!\n"); |
| |
| /* Enable Bcn */ |
| _rtl8822be_set_bcn_ctrl_reg(hw, BIT(3), 0); |
| _rtl8822be_set_bcn_ctrl_reg(hw, 0, BIT(4)); |
| |
| if (b_recover) |
| rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL_8822B + 2, |
| tmp_reg422); |
| } |
| |
| void rtl8822be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_efuse *efuse = rtl_efuse(rtl_priv(hw)); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| |
| switch (variable) { |
| case HW_VAR_ETHER_ADDR: |
| rtlpriv->halmac.ops->halmac_set_mac_address(rtlpriv, 0, val); |
| break; |
| case HW_VAR_BASIC_RATE: { |
| u16 b_rate_cfg = ((u16 *)val)[0]; |
| |
| b_rate_cfg = b_rate_cfg & 0x15f; |
| b_rate_cfg |= 0x01; |
| b_rate_cfg = (b_rate_cfg | 0xd) & (~BIT(1)); |
| rtl_write_byte(rtlpriv, REG_RRSR_8822B, b_rate_cfg & 0xff); |
| rtl_write_byte(rtlpriv, REG_RRSR_8822B + 1, |
| (b_rate_cfg >> 8) & 0xff); |
| } break; |
| case HW_VAR_BSSID: |
| rtlpriv->halmac.ops->halmac_set_bssid(rtlpriv, 0, val); |
| break; |
| case HW_VAR_SIFS: |
| rtl_write_byte(rtlpriv, REG_SIFS_8822B + 1, val[0]); |
| rtl_write_byte(rtlpriv, REG_SIFS_TRX_8822B + 1, val[1]); |
| |
| rtl_write_byte(rtlpriv, REG_SPEC_SIFS_8822B + 1, val[0]); |
| rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS_8822B + 1, val[0]); |
| |
| if (!mac->ht_enable) |
| rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM_8822B, |
| 0x0e0e); |
| else |
| rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM_8822B, |
| *((u16 *)val)); |
| break; |
| case HW_VAR_SLOT_TIME: { |
| u8 e_aci; |
| |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_TRACE, "HW_VAR_SLOT_TIME %x\n", |
| val[0]); |
| |
| rtl_write_byte(rtlpriv, REG_SLOT_8822B, val[0]); |
| |
| for (e_aci = 0; e_aci < AC_MAX; e_aci++) { |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM, |
| (u8 *)(&e_aci)); |
| } |
| } break; |
| case HW_VAR_ACK_PREAMBLE: { |
| u8 reg_tmp; |
| u8 short_preamble = (bool)(*(u8 *)val); |
| |
| reg_tmp = (rtlpriv->mac80211.cur_40_prime_sc) << 5; |
| if (short_preamble) |
| reg_tmp |= 0x80; |
| rtl_write_byte(rtlpriv, REG_RRSR_8822B + 2, reg_tmp); |
| rtlpriv->mac80211.short_preamble = short_preamble; |
| } break; |
| case HW_VAR_WPA_CONFIG: |
| rtl_write_byte(rtlpriv, REG_SECCFG_8822B, *((u8 *)val)); |
| break; |
| case HW_VAR_AMPDU_FACTOR: { |
| u32 ampdu_len = (*((u8 *)val)); |
| |
| ampdu_len = (0x2000 << ampdu_len) - 1; |
| rtl_write_dword(rtlpriv, REG_AMPDU_MAX_LENGTH_8822B, ampdu_len); |
| } break; |
| case HW_VAR_AC_PARAM: { |
| u8 e_aci = *((u8 *)val); |
| |
| if (mac->vif && mac->vif->bss_conf.assoc && !mac->act_scanning) |
| rtl8822be_set_qos(hw, e_aci); |
| |
| if (rtlpci->acm_method != EACMWAY2_SW) |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL, |
| (u8 *)(&e_aci)); |
| } break; |
| case HW_VAR_ACM_CTRL: { |
| u8 e_aci = *((u8 *)val); |
| union aci_aifsn *aifs = (union aci_aifsn *)&mac->ac[0].aifs; |
| |
| u8 acm = aifs->f.acm; |
| u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL_8822B); |
| |
| acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1); |
| |
| if (acm) { |
| switch (e_aci) { |
| case AC0_BE: |
| acm_ctrl |= ACMHW_BEQ_EN; |
| break; |
| case AC2_VI: |
| acm_ctrl |= ACMHW_VIQ_EN; |
| break; |
| case AC3_VO: |
| acm_ctrl |= ACMHW_VOQ_EN; |
| break; |
| default: |
| RT_TRACE( |
| rtlpriv, COMP_ERR, DBG_WARNING, |
| "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n", |
| acm); |
| break; |
| } |
| } else { |
| switch (e_aci) { |
| case AC0_BE: |
| acm_ctrl &= (~ACMHW_BEQ_EN); |
| break; |
| case AC2_VI: |
| acm_ctrl &= (~ACMHW_VIQ_EN); |
| break; |
| case AC3_VO: |
| acm_ctrl &= (~ACMHW_VOQ_EN); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG, |
| "switch case not process\n"); |
| break; |
| } |
| } |
| |
| RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE, |
| "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", |
| acm_ctrl); |
| rtl_write_byte(rtlpriv, REG_ACMHWCTRL_8822B, acm_ctrl); |
| } break; |
| case HW_VAR_RCR: { |
| rtl_write_dword(rtlpriv, REG_RCR_8822B, ((u32 *)(val))[0]); |
| rtlpci->receive_config = ((u32 *)(val))[0]; |
| } break; |
| case HW_VAR_RETRY_LIMIT: { |
| u8 retry_limit = ((u8 *)(val))[0]; |
| |
| rtl_write_word(rtlpriv, REG_RETRY_LIMIT_8822B, |
| retry_limit << RETRY_LIMIT_SHORT_SHIFT | |
| retry_limit << RETRY_LIMIT_LONG_SHIFT); |
| } break; |
| case HW_VAR_DUAL_TSF_RST: |
| rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST_8822B, |
| (BIT(0) | BIT(1))); |
| break; |
| case HW_VAR_EFUSE_BYTES: |
| efuse->efuse_usedbytes = *((u16 *)val); |
| break; |
| case HW_VAR_EFUSE_USAGE: |
| efuse->efuse_usedpercentage = *((u8 *)val); |
| break; |
| case HW_VAR_IO_CMD: |
| rtl8822be_phy_set_io_cmd(hw, (*(enum io_type *)val)); |
| break; |
| case HW_VAR_SET_RPWM: |
| break; |
| case HW_VAR_H2C_FW_PWRMODE: |
| rtl8822be_set_fw_pwrmode_cmd(hw, (*(u8 *)val)); |
| break; |
| case HW_VAR_FW_PSMODE_STATUS: |
| ppsc->fw_current_inpsmode = *((bool *)val); |
| break; |
| case HW_VAR_RESUME_CLK_ON: |
| _rtl8822be_set_fw_ps_rf_on(hw); |
| break; |
| case HW_VAR_FW_LPS_ACTION: { |
| bool b_enter_fwlps = *((bool *)val); |
| |
| if (b_enter_fwlps) |
| _rtl8822be_fwlps_enter(hw); |
| else |
| _rtl8822be_fwlps_leave(hw); |
| } break; |
| case HW_VAR_H2C_FW_JOINBSSRPT: { |
| u8 mstatus = (*(u8 *)val); |
| |
| if (mstatus == RT_MEDIA_CONNECT) { |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AID, NULL); |
| _rtl8822be_download_rsvd_page(hw); |
| } |
| rtl8822be_set_default_port_id_cmd(hw); |
| rtl8822be_set_fw_media_status_rpt_cmd(hw, mstatus); |
| } break; |
| case HW_VAR_H2C_FW_P2P_PS_OFFLOAD: |
| rtl8822be_set_p2p_ps_offload_cmd(hw, (*(u8 *)val)); |
| break; |
| case HW_VAR_AID: { |
| u16 u2btmp; |
| |
| u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT_8822B); |
| u2btmp &= 0xC000; |
| rtl_write_word(rtlpriv, REG_BCN_PSR_RPT_8822B, |
| (u2btmp | mac->assoc_id)); |
| } break; |
| case HW_VAR_CORRECT_TSF: { |
| u8 btype_ibss = ((u8 *)(val))[0]; |
| |
| if (btype_ibss) |
| _rtl8822be_stop_tx_beacon(hw); |
| |
| _rtl8822be_set_bcn_ctrl_reg(hw, 0, BIT(3)); |
| |
| rtl_write_dword(rtlpriv, REG_TSFTR_8822B, |
| (u32)(mac->tsf & 0xffffffff)); |
| rtl_write_dword(rtlpriv, REG_TSFTR_8822B + 4, |
| (u32)((mac->tsf >> 32) & 0xffffffff)); |
| |
| _rtl8822be_set_bcn_ctrl_reg(hw, BIT(3), 0); |
| |
| if (btype_ibss) |
| _rtl8822be_resume_tx_beacon(hw); |
| } break; |
| case HW_VAR_KEEP_ALIVE: { |
| u8 array[2]; |
| |
| array[0] = 0xff; |
| array[1] = *((u8 *)val); |
| rtl8822be_fill_h2c_cmd(hw, H2C_8822B_KEEP_ALIVE_CTRL, 2, array); |
| } break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG, |
| "switch case not process %x\n", variable); |
| break; |
| } |
| } |
| |
| static void _rtl8822be_gen_refresh_led_state(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_led *led0 = &pcipriv->ledctl.sw_led0; |
| |
| if (rtlpriv->rtlhal.up_first_time) |
| return; |
| |
| if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) |
| rtl8822be_sw_led_on(hw, led0); |
| else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT) |
| rtl8822be_sw_led_on(hw, led0); |
| else |
| rtl8822be_sw_led_off(hw, led0); |
| } |
| |
| static bool _rtl8822be_init_trxbd(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| /*struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));*/ |
| |
| u8 bytetmp; |
| /*u16 wordtmp;*/ |
| u32 dwordtmp; |
| |
| /* Set TX/RX descriptor physical address -- HI part */ |
| if (!rtlpriv->cfg->mod_params->dma64) |
| goto dma64_end; |
| |
| rtl_write_dword(rtlpriv, REG_H2CQ_TXBD_DESA_8822B + 4, |
| ((u64)rtlpci->tx_ring[H2C_QUEUE].buffer_desc_dma) >> |
| 32); |
| rtl_write_dword(rtlpriv, REG_BCNQ_TXBD_DESA_8822B + 4, |
| ((u64)rtlpci->tx_ring[BEACON_QUEUE].buffer_desc_dma) >> |
| 32); |
| rtl_write_dword(rtlpriv, REG_MGQ_TXBD_DESA_8822B + 4, |
| (u64)rtlpci->tx_ring[MGNT_QUEUE].buffer_desc_dma >> 32); |
| rtl_write_dword(rtlpriv, REG_VOQ_TXBD_DESA_8822B + 4, |
| (u64)rtlpci->tx_ring[VO_QUEUE].buffer_desc_dma >> 32); |
| rtl_write_dword(rtlpriv, REG_VIQ_TXBD_DESA_8822B + 4, |
| (u64)rtlpci->tx_ring[VI_QUEUE].buffer_desc_dma >> 32); |
| rtl_write_dword(rtlpriv, REG_BEQ_TXBD_DESA_8822B + 4, |
| (u64)rtlpci->tx_ring[BE_QUEUE].buffer_desc_dma >> 32); |
| rtl_write_dword(rtlpriv, REG_BKQ_TXBD_DESA_8822B + 4, |
| (u64)rtlpci->tx_ring[BK_QUEUE].buffer_desc_dma >> 32); |
| rtl_write_dword(rtlpriv, REG_HI0Q_TXBD_DESA_8822B + 4, |
| (u64)rtlpci->tx_ring[HIGH_QUEUE].buffer_desc_dma >> 32); |
| |
| rtl_write_dword(rtlpriv, REG_RXQ_RXBD_DESA_8822B + 4, |
| (u64)rtlpci->rx_ring[RX_MPDU_QUEUE].dma >> 32); |
| |
| dma64_end: |
| /* Set TX/RX descriptor physical address(from OS API). */ |
| rtl_write_dword(rtlpriv, REG_H2CQ_TXBD_DESA_8822B, |
| ((u64)rtlpci->tx_ring[H2C_QUEUE].buffer_desc_dma) & |
| DMA_BIT_MASK(32)); |
| rtl_write_dword(rtlpriv, REG_BCNQ_TXBD_DESA_8822B, |
| ((u64)rtlpci->tx_ring[BEACON_QUEUE].buffer_desc_dma) & |
| DMA_BIT_MASK(32)); |
| rtl_write_dword(rtlpriv, REG_MGQ_TXBD_DESA_8822B, |
| (u64)rtlpci->tx_ring[MGNT_QUEUE].buffer_desc_dma & |
| DMA_BIT_MASK(32)); |
| rtl_write_dword(rtlpriv, REG_VOQ_TXBD_DESA_8822B, |
| (u64)rtlpci->tx_ring[VO_QUEUE].buffer_desc_dma & |
| DMA_BIT_MASK(32)); |
| rtl_write_dword(rtlpriv, REG_VIQ_TXBD_DESA_8822B, |
| (u64)rtlpci->tx_ring[VI_QUEUE].buffer_desc_dma & |
| DMA_BIT_MASK(32)); |
| rtl_write_dword(rtlpriv, REG_BEQ_TXBD_DESA_8822B, |
| (u64)rtlpci->tx_ring[BE_QUEUE].buffer_desc_dma & |
| DMA_BIT_MASK(32)); |
| dwordtmp = rtl_read_dword(rtlpriv, REG_BEQ_TXBD_DESA_8822B); /* need? */ |
| rtl_write_dword(rtlpriv, REG_BKQ_TXBD_DESA_8822B, |
| (u64)rtlpci->tx_ring[BK_QUEUE].buffer_desc_dma & |
| DMA_BIT_MASK(32)); |
| rtl_write_dword(rtlpriv, REG_HI0Q_TXBD_DESA_8822B, |
| (u64)rtlpci->tx_ring[HIGH_QUEUE].buffer_desc_dma & |
| DMA_BIT_MASK(32)); |
| |
| rtl_write_dword(rtlpriv, REG_RXQ_RXBD_DESA_8822B, |
| (u64)rtlpci->rx_ring[RX_MPDU_QUEUE].dma & |
| DMA_BIT_MASK(32)); |
| |
| /* Reset R/W point */ |
| rtl_write_dword(rtlpriv, REG_BD_RWPTR_CLR_8822B, 0x3fffffff); |
| |
| /* Reset the H2CQ R/W point index to 0 */ |
| dwordtmp = rtl_read_dword(rtlpriv, REG_H2CQ_CSR_8822B); |
| rtl_write_dword(rtlpriv, REG_H2CQ_CSR_8822B, |
| (dwordtmp | BIT(8) | BIT(16))); |
| |
| bytetmp = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_8822B + 3); |
| rtl_write_byte(rtlpriv, REG_PCIE_CTRL_8822B + 3, bytetmp | 0xF7); |
| |
| rtl_write_dword(rtlpriv, REG_INT_MIG_8822B, 0); |
| |
| rtl_write_dword(rtlpriv, REG_MCUTST_I_8822B, 0x0); |
| |
| rtl_write_word(rtlpriv, REG_H2CQ_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_MGQ_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_VOQ_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_VIQ_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_BEQ_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_VOQ_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_BKQ_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI0Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI1Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI2Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI3Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI4Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI5Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI6Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| rtl_write_word(rtlpriv, REG_HI7Q_TXBD_NUM_8822B, |
| TX_DESC_NUM_8822B | |
| ((RTL8822BE_SEG_NUM << 12) & 0x3000)); |
| /*Rx*/ |
| rtl_write_word(rtlpriv, REG_RX_RXBD_NUM_8822B, |
| RX_DESC_NUM_8822BE | |
| ((RTL8822BE_SEG_NUM << 13) & 0x6000) | 0x8000); |
| |
| rtl_write_dword(rtlpriv, REG_BD_RWPTR_CLR_8822B, 0XFFFFFFFF); |
| |
| _rtl8822be_gen_refresh_led_state(hw); |
| |
| return true; |
| } |
| |
| static void _rtl8822be_enable_aspm_back_door(struct ieee80211_hw *hw) |
| { |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| u8 tmp; |
| |
| if (!ppsc->support_backdoor) |
| return; |
| |
| pci_read_config_byte(rtlpci->pdev, 0x70f, &tmp); |
| pci_write_config_byte(rtlpci->pdev, 0x70f, tmp | BIT(7)); |
| |
| pci_read_config_byte(rtlpci->pdev, 0x719, &tmp); |
| pci_write_config_byte(rtlpci->pdev, 0x719, tmp | BIT(3) | BIT(4)); |
| } |
| |
| void rtl8822be_enable_hw_security_config(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 sec_reg_value; |
| u8 tmp; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, |
| "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n", |
| rtlpriv->sec.pairwise_enc_algorithm, |
| rtlpriv->sec.group_enc_algorithm); |
| |
| if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, |
| "not open hw encryption\n"); |
| return; |
| } |
| |
| sec_reg_value = SCR_TX_ENC_ENABLE | SRC_RX_DEC_ENABLE; |
| |
| if (rtlpriv->sec.use_defaultkey) { |
| sec_reg_value |= SCR_TX_USE_DK; |
| sec_reg_value |= SCR_RX_USE_DK; |
| } |
| |
| sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK); |
| |
| tmp = rtl_read_byte(rtlpriv, REG_CR_8822B + 1); |
| rtl_write_byte(rtlpriv, REG_CR_8822B + 1, tmp | BIT(1)); |
| |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "The SECR-value %x\n", |
| sec_reg_value); |
| |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value); |
| } |
| |
| static bool _rtl8822be_check_pcie_dma_hang(struct rtl_priv *rtlpriv) |
| { |
| u8 tmp; |
| |
| /* write reg 0x350 Bit[26]=1. Enable debug port. */ |
| tmp = rtl_read_byte(rtlpriv, REG_DBI_FLAG_V1_8822B + 3); |
| if (!(tmp & BIT(2))) { |
| rtl_write_byte(rtlpriv, REG_DBI_FLAG_V1_8822B + 3, |
| (tmp | BIT(2))); |
| mdelay(100); /* Suggested by DD Justin_tsai. */ |
| } |
| |
| /* read reg 0x350 Bit[25] if 1 : RX hang |
| * read reg 0x350 Bit[24] if 1 : TX hang |
| */ |
| tmp = rtl_read_byte(rtlpriv, REG_DBI_FLAG_V1_8822B + 3); |
| if ((tmp & BIT(0)) || (tmp & BIT(1))) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, |
| "CheckPcieDMAHang8822BE(): true!!\n"); |
| return true; |
| } else { |
| return false; |
| } |
| } |
| |
| static void _rtl8822be_reset_pcie_interface_dma(struct rtl_priv *rtlpriv, |
| bool mac_power_on) |
| { |
| u8 tmp; |
| bool release_mac_rx_pause; |
| u8 backup_pcie_dma_pause; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, |
| "ResetPcieInterfaceDMA8822BE()\n"); |
| |
| /* Revise Note: Follow the document "PCIe RX DMA Hang Reset Flow_v03" |
| * released by SD1 Alan. |
| * 2013.05.07, by tynli. |
| */ |
| |
| /* 1. disable register write lock |
| * write 0x1C bit[1:0] = 2'h0 |
| * write 0xCC bit[2] = 1'b1 |
| */ |
| tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL_8822B); |
| tmp &= ~(BIT(1) | BIT(0)); |
| rtl_write_byte(rtlpriv, REG_RSV_CTRL_8822B, tmp); |
| tmp = rtl_read_byte(rtlpriv, REG_PMC_DBG_CTRL2_8822B); |
| tmp |= BIT(2); |
| rtl_write_byte(rtlpriv, REG_PMC_DBG_CTRL2_8822B, tmp); |
| |
| /* 2. Check and pause TRX DMA |
| * write 0x284 bit[18] = 1'b1 |
| * write 0x301 = 0xFF |
| */ |
| tmp = rtl_read_byte(rtlpriv, REG_RXDMA_CONTROL_8822B); |
| if (tmp & BIT(2)) { |
| /* Already pause before the function for another purpose. */ |
| release_mac_rx_pause = false; |
| } else { |
| rtl_write_byte(rtlpriv, REG_RXDMA_CONTROL_8822B, |
| (tmp | BIT(2))); |
| release_mac_rx_pause = true; |
| } |
| |
| backup_pcie_dma_pause = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_8822B + 1); |
| if (backup_pcie_dma_pause != 0xFF) |
| rtl_write_byte(rtlpriv, REG_PCIE_CTRL_8822B + 1, 0xFF); |
| |
| if (mac_power_on) { |
| /* 3. reset TRX function |
| * write 0x100 = 0x00 |
| */ |
| rtl_write_byte(rtlpriv, REG_CR_8822B, 0); |
| } |
| |
| /* 4. Reset PCIe DMA |
| * write 0x003 bit[0] = 0 |
| */ |
| tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN_8822B + 1); |
| tmp &= ~(BIT(0)); |
| rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN_8822B + 1, tmp); |
| |
| /* 5. Enable PCIe DMA |
| * write 0x003 bit[0] = 1 |
| */ |
| tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN_8822B + 1); |
| tmp |= BIT(0); |
| rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN_8822B + 1, tmp); |
| |
| if (mac_power_on) { |
| /* 6. enable TRX function |
| * write 0x100 = 0xFF |
| */ |
| rtl_write_byte(rtlpriv, REG_CR_8822B, 0xFF); |
| |
| /* We should init LLT & RQPN and |
| * prepare Tx/Rx descrptor address later |
| * because MAC function is reset. |
| */ |
| } |
| |
| /* 7. Restore PCIe autoload down bit |
| * write 0xF8 bit[17] = 1'b1 |
| */ |
| tmp = rtl_read_byte(rtlpriv, REG_SYS_STATUS2_8822B + 2); |
| tmp |= BIT(1); |
| rtl_write_byte(rtlpriv, REG_SYS_STATUS2_8822B + 2, tmp); |
| |
| /* In MAC power on state, BB and RF maybe in ON state, |
| * if we release TRx DMA here |
| * it will cause packets to be started to Tx/Rx, |
| * so we release Tx/Rx DMA later. |
| */ |
| if (!mac_power_on) { |
| /* 8. release TRX DMA |
| * write 0x284 bit[18] = 1'b0 |
| * write 0x301 = 0x00 |
| */ |
| if (release_mac_rx_pause) { |
| tmp = rtl_read_byte(rtlpriv, REG_RXDMA_CONTROL_8822B); |
| rtl_write_byte(rtlpriv, REG_RXDMA_CONTROL_8822B, |
| (tmp & (~BIT(2)))); |
| } |
| rtl_write_byte(rtlpriv, REG_PCIE_CTRL_8822B + 1, |
| backup_pcie_dma_pause); |
| } |
| |
| /* 9. lock system register |
| * write 0xCC bit[2] = 1'b0 |
| */ |
| tmp = rtl_read_byte(rtlpriv, REG_PMC_DBG_CTRL2_8822B); |
| tmp &= ~(BIT(2)); |
| rtl_write_byte(rtlpriv, REG_PMC_DBG_CTRL2_8822B, tmp); |
| } |
| |
| int rtl8822be_hw_init(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| struct rtl_phy *rtlphy = &rtlpriv->phy; |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| int err = 0; |
| u8 tmp_u1b; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, " Rtl8822BE hw init\n"); |
| rtlpriv->rtlhal.being_init_adapter = true; |
| rtlpriv->intf_ops->disable_aspm(hw); |
| |
| if (_rtl8822be_check_pcie_dma_hang(rtlpriv)) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "8822be dma hang!\n"); |
| _rtl8822be_reset_pcie_interface_dma(rtlpriv, |
| rtlhal->mac_func_enable); |
| rtlhal->mac_func_enable = false; |
| } |
| |
| /* init TRX BD */ |
| _rtl8822be_init_trxbd(hw); |
| |
| /* use halmac to init */ |
| err = rtlpriv->halmac.ops->halmac_init_hal(rtlpriv); |
| if (err) { |
| pr_err("halmac_init_hal failed\n"); |
| rtlhal->fw_ready = false; |
| return err; |
| } |
| |
| rtlhal->fw_ready = true; |
| |
| /* have to init after halmac init */ |
| tmp_u1b = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_8822B + 2); |
| rtl_write_byte(rtlpriv, REG_PCIE_CTRL_8822B + 2, (tmp_u1b | BIT(4))); |
| |
| /*rtl_write_word(rtlpriv, REG_PCIE_CTRL_8822B, 0x8000);*/ |
| rtlhal->rx_tag = 0; |
| |
| rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ_8822B, 0x4); |
| |
| /*fw related variable initialize */ |
| ppsc->fw_current_inpsmode = false; |
| rtlhal->fw_ps_state = FW_PS_STATE_ALL_ON_8822B; |
| rtlhal->fw_clk_change_in_progress = false; |
| rtlhal->allow_sw_to_change_hwclc = false; |
| rtlhal->last_hmeboxnum = 0; |
| |
| rtlphy->rfreg_chnlval[0] = |
| rtl_get_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK); |
| rtlphy->rfreg_chnlval[1] = |
| rtl_get_rfreg(hw, RF90_PATH_B, RF_CHNLBW, RFREG_OFFSET_MASK); |
| rtlphy->backup_rf_0x1a = (u32)rtl_get_rfreg(hw, RF90_PATH_A, RF_RX_G1, |
| RFREG_OFFSET_MASK); |
| rtlphy->rfreg_chnlval[0] = |
| (rtlphy->rfreg_chnlval[0] & 0xfffff3ff) | BIT(10) | BIT(11); |
| |
| rtlhal->mac_func_enable = true; |
| |
| if (rtlpriv->cfg->ops->get_btc_status()) |
| rtlpriv->btcoexist.btc_ops->btc_power_on_setting(rtlpriv); |
| |
| /* reset cam / set security */ |
| rtl_cam_reset_all_entry(hw); |
| rtl8822be_enable_hw_security_config(hw); |
| |
| /* check RCR/ICV bit */ |
| rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); |
| rtl_write_dword(rtlpriv, REG_RCR_8822B, rtlpci->receive_config); |
| |
| /* clear rx ctrl frame */ |
| rtl_write_word(rtlpriv, REG_RXFLTMAP1_8822B, 0); |
| |
| ppsc->rfpwr_state = ERFON; |
| |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); |
| _rtl8822be_enable_aspm_back_door(hw); |
| rtlpriv->intf_ops->enable_aspm(hw); |
| |
| if (rtlpriv->cfg->ops->get_btc_status()) |
| rtlpriv->btcoexist.btc_ops->btc_init_hw_config(rtlpriv); |
| else |
| rtlpriv->btcoexist.btc_ops->btc_init_hw_config_wifi_only( |
| rtlpriv); |
| |
| rtlpriv->rtlhal.being_init_adapter = false; |
| |
| rtlpriv->phydm.ops->phydm_init_dm(rtlpriv); |
| |
| /* clear ISR, and IMR will be on later */ |
| rtl_write_dword(rtlpriv, REG_HISR0_8822B, |
| rtl_read_dword(rtlpriv, REG_HISR0_8822B)); |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "end of Rtl8822BE hw init %x\n", |
| err); |
| return 0; |
| } |
| |
| static u32 _rtl8822be_read_chip_version(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &rtlpriv->phy; |
| /*enum version_8822b version = VERSION_UNKNOWN;*/ |
| u32 version; |
| u32 value32; |
| |
| rtlphy->rf_type = RF_2T2R; |
| |
| value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG1_8822B); |
| |
| version = value32; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Chip RF Type: %s\n", |
| (rtlphy->rf_type == RF_2T2R) ? "RF_2T2R" : "RF_1T1R"); |
| |
| return version; |
| } |
| |
| static int _rtl8822be_set_media_status(struct ieee80211_hw *hw, |
| enum nl80211_iftype type) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 bt_msr = rtl_read_byte(rtlpriv, MSR); |
| enum led_ctl_mode ledaction = LED_CTL_NO_LINK; |
| u8 mode = MSR_NOLINK; |
| |
| bt_msr &= 0xfc; |
| |
| switch (type) { |
| case NL80211_IFTYPE_UNSPECIFIED: |
| mode = MSR_NOLINK; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to NO LINK!\n"); |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| case NL80211_IFTYPE_MESH_POINT: |
| mode = MSR_ADHOC; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to Ad Hoc!\n"); |
| break; |
| case NL80211_IFTYPE_STATION: |
| mode = MSR_INFRA; |
| ledaction = LED_CTL_LINK; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to STA!\n"); |
| break; |
| case NL80211_IFTYPE_AP: |
| mode = MSR_AP; |
| ledaction = LED_CTL_LINK; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to AP!\n"); |
| break; |
| default: |
| pr_err("Network type %d not support!\n", type); |
| return 1; |
| } |
| |
| /* MSR_INFRA == Link in infrastructure network; |
| * MSR_ADHOC == Link in ad hoc network; |
| * Therefore, check link state is necessary. |
| * |
| * MSR_AP == AP mode; link state is not cared here. |
| */ |
| if (mode != MSR_AP && rtlpriv->mac80211.link_state < MAC80211_LINKED) { |
| mode = MSR_NOLINK; |
| ledaction = LED_CTL_NO_LINK; |
| } |
| |
| if (mode == MSR_NOLINK || mode == MSR_INFRA) { |
| _rtl8822be_stop_tx_beacon(hw); |
| _rtl8822be_enable_bcn_sub_func(hw); |
| } else if (mode == MSR_ADHOC || mode == MSR_AP) { |
| _rtl8822be_resume_tx_beacon(hw); |
| _rtl8822be_disable_bcn_sub_func(hw); |
| } else { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, |
| "Set HW_VAR_MEDIA_STATUS: No such media status(%x).\n", |
| mode); |
| } |
| |
| rtl_write_byte(rtlpriv, (MSR), bt_msr | mode); |
| rtlpriv->cfg->ops->led_control(hw, ledaction); |
| if (mode == MSR_AP) |
| rtl_write_byte(rtlpriv, REG_BCNTCFG_8822B + 1, 0x00); |
| else |
| rtl_write_byte(rtlpriv, REG_BCNTCFG_8822B + 1, 0x66); |
| return 0; |
| } |
| |
| void rtl8822be_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| u32 reg_rcr = rtlpci->receive_config; |
| |
| if (rtlpriv->psc.rfpwr_state != ERFON) |
| return; |
| |
| if (check_bssid) { |
| reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); |
| _rtl8822be_set_bcn_ctrl_reg(hw, 0, BIT(4)); |
| } else if (!check_bssid) { |
| reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); |
| _rtl8822be_set_bcn_ctrl_reg(hw, BIT(4), 0); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); |
| } |
| } |
| |
| int rtl8822be_set_network_type(struct ieee80211_hw *hw, |
| enum nl80211_iftype type) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| if (_rtl8822be_set_media_status(hw, type)) |
| return -EOPNOTSUPP; |
| |
| if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { |
| if (type != NL80211_IFTYPE_AP && |
| type != NL80211_IFTYPE_MESH_POINT) |
| rtl8822be_set_check_bssid(hw, true); |
| } else { |
| rtl8822be_set_check_bssid(hw, false); |
| } |
| |
| return 0; |
| } |
| |
| void rtl8822be_set_qos(struct ieee80211_hw *hw, int aci) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtlpriv); |
| u32 ac_param; |
| |
| ac_param = rtl_get_hal_edca_param(hw, mac->vif, mac->mode, |
| &mac->edca_param[aci]); |
| |
| switch (aci) { |
| case AC1_BK: |
| rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM_8822B, ac_param); |
| break; |
| case AC0_BE: |
| rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM_8822B, ac_param); |
| break; |
| case AC2_VI: |
| rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM_8822B, ac_param); |
| break; |
| case AC3_VO: |
| rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM_8822B, ac_param); |
| break; |
| default: |
| WARN_ONCE(true, "invalid aci: %d !\n", aci); |
| break; |
| } |
| } |
| |
| void rtl8822be_enable_interrupt(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| |
| rtl_write_dword(rtlpriv, REG_HIMR0_8822B, |
| rtlpci->irq_mask[0] & 0xFFFFFFFF); |
| rtl_write_dword(rtlpriv, REG_HIMR1_8822B, |
| rtlpci->irq_mask[1] & 0xFFFFFFFF); |
| rtl_write_dword(rtlpriv, REG_HIMR3_8822B, |
| rtlpci->irq_mask[3] & 0xFFFFFFFF); |
| rtlpci->irq_enabled = true; |
| } |
| |
| void rtl8822be_disable_interrupt(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| |
| rtl_write_dword(rtlpriv, REG_HIMR0_8822B, IMR_DISABLED); |
| rtl_write_dword(rtlpriv, REG_HIMR1_8822B, IMR_DISABLED); |
| rtl_write_dword(rtlpriv, REG_HIMR3_8822B, IMR_DISABLED); |
| rtlpci->irq_enabled = false; |
| /*synchronize_irq(rtlpci->pdev->irq);*/ |
| } |
| |
| void rtl8822be_card_disable(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| enum nl80211_iftype opmode; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "RTL8822be card disable\n"); |
| |
| RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); |
| |
| mac->link_state = MAC80211_NOLINK; |
| opmode = NL80211_IFTYPE_UNSPECIFIED; |
| |
| _rtl8822be_set_media_status(hw, opmode); |
| |
| if (rtlpriv->rtlhal.driver_is_goingto_unload || |
| ppsc->rfoff_reason > RF_CHANGE_BY_PS) |
| rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); |
| |
| rtlpriv->phydm.ops->phydm_deinit_dm(rtlpriv); |
| |
| rtlpriv->halmac.ops->halmac_deinit_hal(rtlpriv); |
| |
| /* after power off we should do iqk again */ |
| if (!rtlpriv->cfg->ops->get_btc_status()) |
| rtlpriv->phy.iqk_initialized = false; |
| } |
| |
| void rtl8822be_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta, |
| u32 *p_intb, u32 *p_intc, u32 *p_intd) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| |
| *p_inta = |
| rtl_read_dword(rtlpriv, REG_HISR0_8822B) & rtlpci->irq_mask[0]; |
| rtl_write_dword(rtlpriv, REG_HISR0_8822B, *p_inta); |
| |
| *p_intb = |
| rtl_read_dword(rtlpriv, REG_HISR1_8822B) & rtlpci->irq_mask[1]; |
| rtl_write_dword(rtlpriv, REG_HISR1_8822B, *p_intb); |
| |
| *p_intd = |
| rtl_read_dword(rtlpriv, REG_HISR3_8822B) & rtlpci->irq_mask[3]; |
| rtl_write_dword(rtlpriv, REG_HISR3_8822B, *p_intd); |
| } |
| |
| void rtl8822be_set_beacon_related_registers(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| u16 bcn_interval, atim_window; |
| |
| bcn_interval = mac->beacon_interval; |
| atim_window = 2; /*FIX MERGE */ |
| rtl8822be_disable_interrupt(hw); |
| rtl_write_word(rtlpriv, REG_ATIMWND_8822B, atim_window); |
| rtl_write_word(rtlpriv, REG_MBSSID_BCN_SPACE_8822B, bcn_interval); |
| rtl_write_word(rtlpriv, REG_BCNTCFG_8822B, 0x660f); |
| rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK_8822B, 0x18); |
| rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM_8822B, 0x18); |
| rtl_write_byte(rtlpriv, 0x606, 0x30); |
| rtlpci->reg_bcn_ctrl_val |= BIT(3); |
| rtl_write_byte(rtlpriv, REG_BCN_CTRL_8822B, |
| (u8)rtlpci->reg_bcn_ctrl_val); |
| } |
| |
| void rtl8822be_set_beacon_interval(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| u16 bcn_interval = mac->beacon_interval; |
| |
| RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG, "beacon_interval:%d\n", |
| bcn_interval); |
| rtl_write_word(rtlpriv, REG_MBSSID_BCN_SPACE_8822B, bcn_interval); |
| } |
| |
| void rtl8822be_update_interrupt_mask(struct ieee80211_hw *hw, u32 add_msr, |
| u32 rm_msr) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| |
| RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n", |
| add_msr, rm_msr); |
| |
| if (add_msr) |
| rtlpci->irq_mask[0] |= add_msr; |
| if (rm_msr) |
| rtlpci->irq_mask[0] &= (~rm_msr); |
| rtl8822be_disable_interrupt(hw); |
| rtl8822be_enable_interrupt(hw); |
| } |
| |
| static bool _rtl8822be_get_chnl_group(u8 chnl, u8 *group) |
| { |
| bool in_24g; |
| |
| if (chnl <= 14) { |
| in_24g = true; |
| |
| if (chnl >= 1 && chnl <= 2) |
| *group = 0; |
| else if (chnl >= 3 && chnl <= 5) |
| *group = 1; |
| else if (chnl >= 6 && chnl <= 8) |
| *group = 2; |
| else if (chnl >= 9 && chnl <= 11) |
| *group = 3; |
| else if (chnl >= 12 && chnl <= 14) |
| *group = 4; |
| } else { |
| in_24g = false; |
| |
| if (chnl >= 36 && chnl <= 42) |
| *group = 0; |
| else if (chnl >= 44 && chnl <= 48) |
| *group = 1; |
| else if (chnl >= 50 && chnl <= 58) |
| *group = 2; |
| else if (chnl >= 60 && chnl <= 64) |
| *group = 3; |
| else if (chnl >= 100 && chnl <= 106) |
| *group = 4; |
| else if (chnl >= 108 && chnl <= 114) |
| *group = 5; |
| else if (chnl >= 116 && chnl <= 122) |
| *group = 6; |
| else if (chnl >= 124 && chnl <= 130) |
| *group = 7; |
| else if (chnl >= 132 && chnl <= 138) |
| *group = 8; |
| else if (chnl >= 140 && chnl <= 144) |
| *group = 9; |
| else if (chnl >= 149 && chnl <= 155) |
| *group = 10; |
| else if (chnl >= 157 && chnl <= 161) |
| *group = 11; |
| else if (chnl >= 165 && chnl <= 171) |
| *group = 12; |
| else if (chnl >= 173 && chnl <= 177) |
| *group = 13; |
| } |
| return in_24g; |
| } |
| |
| static inline bool power_valid(u8 power) |
| { |
| if (power <= 63) |
| return true; |
| |
| return false; |
| } |
| |
| static inline s8 power_diff(s8 diff) |
| { |
| /* bit sign number to 8 bit sign number */ |
| if (diff & BIT(3)) |
| diff |= 0xF0; |
| |
| return diff; |
| } |
| |
| static void _rtl8822be_read_power_value_fromprom(struct ieee80211_hw *hw, |
| struct txpower_info_2g *pwr2g, |
| struct txpower_info_5g *pwr5g, |
| bool autoload_fail, u8 *hwinfo) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u32 rf, addr = EEPROM_TX_PWR_INX_8822B, group, i = 0; |
| u8 power; |
| s8 diff; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, |
| "hal_ReadPowerValueFromPROM8822B(): PROMContent[0x%x]=0x%x\n", |
| (addr + 1), hwinfo[addr + 1]); |
| if (hwinfo[addr + 1] == 0xFF) /*YJ,add,120316*/ |
| autoload_fail = true; |
| |
| memset(pwr2g, 0, sizeof(struct txpower_info_2g)); |
| memset(pwr5g, 0, sizeof(struct txpower_info_5g)); |
| |
| if (autoload_fail) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, |
| "auto load fail : Use Default value!\n"); |
| for (rf = 0; rf < MAX_RF_PATH; rf++) { |
| /* 2.4G default value */ |
| for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { |
| pwr2g->index_cck_base[rf][group] = 0x2D; |
| pwr2g->index_bw40_base[rf][group] = 0x2D; |
| } |
| for (i = 0; i < MAX_TX_COUNT; i++) { |
| if (i == 0) { |
| pwr2g->bw20_diff[rf][0] = 0x02; |
| pwr2g->ofdm_diff[rf][0] = 0x04; |
| } else { |
| pwr2g->bw20_diff[rf][i] = 0xFE; |
| pwr2g->bw40_diff[rf][i] = 0xFE; |
| pwr2g->cck_diff[rf][i] = 0xFE; |
| pwr2g->ofdm_diff[rf][i] = 0xFE; |
| } |
| } |
| |
| /*5G default value*/ |
| for (group = 0; group < MAX_CHNL_GROUP_5G; group++) |
| pwr5g->index_bw40_base[rf][group] = 0x2A; |
| |
| for (i = 0; i < MAX_TX_COUNT; i++) { |
| if (i == 0) { |
| pwr5g->ofdm_diff[rf][0] = 0x04; |
| pwr5g->bw20_diff[rf][0] = 0x00; |
| pwr5g->bw80_diff[rf][0] = 0xFE; |
| pwr5g->bw160_diff[rf][0] = 0xFE; |
| } else { |
| pwr5g->ofdm_diff[rf][i] = 0xFE; |
| pwr5g->bw20_diff[rf][i] = 0xFE; |
| pwr5g->bw40_diff[rf][i] = 0xFE; |
| pwr5g->bw80_diff[rf][i] = 0xFE; |
| pwr5g->bw160_diff[rf][i] = 0xFE; |
| } |
| } |
| } |
| return; |
| } |
| |
| rtl_priv(hw)->efuse.txpwr_fromeprom = true; |
| |
| for (rf = 0; rf < 2 /*MAX_RF_PATH*/; rf++) { |
| /*2.4G default value*/ |
| for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { |
| power = hwinfo[addr++]; |
| if (power_valid(power)) |
| pwr2g->index_cck_base[rf][group] = power; |
| } |
| for (group = 0; group < MAX_CHNL_GROUP_24G - 1; group++) { |
| power = hwinfo[addr++]; |
| if (power_valid(power)) |
| pwr2g->index_bw40_base[rf][group] = power; |
| } |
| for (i = 0; i < MAX_TX_COUNT; i++) { |
| if (i == 0) { |
| pwr2g->bw40_diff[rf][i] = 0; |
| |
| diff = (hwinfo[addr] & 0xF0) >> 4; |
| pwr2g->bw20_diff[rf][i] = power_diff(diff); |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr2g->ofdm_diff[rf][i] = power_diff(diff); |
| |
| pwr2g->cck_diff[rf][i] = 0; |
| |
| addr++; |
| } else { |
| diff = (hwinfo[addr] & 0xF0) >> 4; |
| pwr2g->bw40_diff[rf][i] = power_diff(diff); |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr2g->bw20_diff[rf][i] = power_diff(diff); |
| |
| addr++; |
| |
| diff = (hwinfo[addr] & 0xF0) >> 4; |
| pwr2g->ofdm_diff[rf][i] = power_diff(diff); |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr2g->cck_diff[rf][i] = power_diff(diff); |
| |
| addr++; |
| } |
| } |
| |
| /*5G default value*/ |
| for (group = 0; group < MAX_CHNL_GROUP_5G; group++) { |
| power = hwinfo[addr++]; |
| if (power_valid(power)) |
| pwr5g->index_bw40_base[rf][group] = power; |
| } |
| |
| for (i = 0; i < MAX_TX_COUNT; i++) { |
| if (i == 0) { |
| pwr5g->bw40_diff[rf][i] = 0; |
| |
| diff = (hwinfo[addr] & 0xF0) >> 4; |
| pwr5g->bw20_diff[rf][i] = power_diff(diff); |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr5g->ofdm_diff[rf][i] = power_diff(diff); |
| |
| addr++; |
| } else { |
| diff = (hwinfo[addr] & 0xF0) >> 4; |
| pwr5g->bw40_diff[rf][i] = power_diff(diff); |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr5g->bw20_diff[rf][i] = power_diff(diff); |
| |
| addr++; |
| } |
| } |
| |
| diff = (hwinfo[addr] & 0xF0) >> 4; |
| pwr5g->ofdm_diff[rf][1] = power_diff(diff); |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr5g->ofdm_diff[rf][2] = power_diff(diff); |
| |
| addr++; |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr5g->ofdm_diff[rf][3] = power_diff(diff); |
| |
| addr++; |
| |
| for (i = 0; i < MAX_TX_COUNT; i++) { |
| diff = (hwinfo[addr] & 0xF0) >> 4; |
| pwr5g->bw80_diff[rf][i] = power_diff(diff); |
| |
| diff = hwinfo[addr] & 0x0F; |
| pwr5g->bw160_diff[rf][i] = power_diff(diff); |
| |
| addr++; |
| } |
| } |
| } |
| |
| static void _rtl8822be_read_txpower_info_from_hwpg(struct ieee80211_hw *hw, |
| bool autoload_fail, |
| u8 *hwinfo) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_efuse *efu = rtl_efuse(rtl_priv(hw)); |
| struct txpower_info_2g pwr2g; |
| struct txpower_info_5g pwr5g; |
| u8 channel5g[CHANNEL_MAX_NUMBER_5G] = { |
| 36, 38, 40, 42, 44, 46, 48, /* Band 1 */ |
| 52, 54, 56, 58, 60, 62, 64, /* Band 2 */ |
| 100, 102, 104, 106, 108, 110, 112, /* Band 3 */ |
| 116, 118, 120, 122, 124, 126, 128, /* Band 3 */ |
| 132, 134, 136, 138, 140, 142, 144, /* Band 3 */ |
| 149, 151, 153, 155, 157, 159, 161, /* Band 4 */ |
| 165, 167, 169, 171, 173, 175, 177}; /* Band 4 */ |
| u8 channel5g_80m[CHANNEL_MAX_NUMBER_5G_80M] = {42, 58, 106, 122, |
| 138, 155, 171}; |
| u8 rf, group; |
| u8 i; |
| |
| _rtl8822be_read_power_value_fromprom(hw, &pwr2g, &pwr5g, autoload_fail, |
| hwinfo); |
| |
| for (rf = 0; rf < MAX_RF_PATH; rf++) { |
| for (i = 0; i < CHANNEL_MAX_NUMBER_2G; i++) { |
| _rtl8822be_get_chnl_group(i + 1, &group); |
| |
| if (i == CHANNEL_MAX_NUMBER_2G - 1) { |
| efu->txpwrlevel_cck[rf][i] = |
| pwr2g.index_cck_base[rf][5]; |
| efu->txpwrlevel_ht40_1s[rf][i] = |
| pwr2g.index_bw40_base[rf][group]; |
| } else { |
| efu->txpwrlevel_cck[rf][i] = |
| pwr2g.index_cck_base[rf][group]; |
| efu->txpwrlevel_ht40_1s[rf][i] = |
| pwr2g.index_bw40_base[rf][group]; |
| } |
| } |
| for (i = 0; i < CHANNEL_MAX_NUMBER_5G; i++) { |
| _rtl8822be_get_chnl_group(channel5g[i], &group); |
| efu->txpwr_5g_bw40base[rf][i] = |
| pwr5g.index_bw40_base[rf][group]; |
| } |
| for (i = 0; i < CHANNEL_MAX_NUMBER_5G_80M; i++) { |
| u8 upper, lower; |
| |
| _rtl8822be_get_chnl_group(channel5g_80m[i], &group); |
| upper = pwr5g.index_bw40_base[rf][group]; |
| lower = pwr5g.index_bw40_base[rf][group + 1]; |
| |
| efu->txpwr_5g_bw80base[rf][i] = (upper + lower) / 2; |
| } |
| for (i = 0; i < MAX_TX_COUNT; i++) { |
| efu->txpwr_cckdiff[rf][i] = pwr2g.cck_diff[rf][i]; |
| efu->txpwr_legacyhtdiff[rf][i] = pwr2g.ofdm_diff[rf][i]; |
| efu->txpwr_ht20diff[rf][i] = pwr2g.bw20_diff[rf][i]; |
| efu->txpwr_ht40diff[rf][i] = pwr2g.bw40_diff[rf][i]; |
| |
| efu->txpwr_5g_ofdmdiff[rf][i] = pwr5g.ofdm_diff[rf][i]; |
| efu->txpwr_5g_bw20diff[rf][i] = pwr5g.bw20_diff[rf][i]; |
| efu->txpwr_5g_bw40diff[rf][i] = pwr5g.bw40_diff[rf][i]; |
| efu->txpwr_5g_bw80diff[rf][i] = pwr5g.bw80_diff[rf][i]; |
| } |
| } |
| |
| if (!autoload_fail) |
| efu->eeprom_thermalmeter = hwinfo[EEPROM_THERMAL_METER_8822B]; |
| else |
| efu->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER; |
| |
| if (efu->eeprom_thermalmeter == 0xff || autoload_fail) { |
| efu->apk_thermalmeterignore = true; |
| efu->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER; |
| } |
| |
| efu->thermalmeter[0] = efu->eeprom_thermalmeter; |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "thermalmeter = 0x%x\n", |
| efu->eeprom_thermalmeter); |
| |
| if (!autoload_fail) { |
| efu->eeprom_regulatory = |
| hwinfo[EEPROM_RF_BOARD_OPTION_8822B] & 0x07; |
| if (hwinfo[EEPROM_RF_BOARD_OPTION_8822B] == 0xFF) |
| efu->eeprom_regulatory = 0; |
| } else { |
| efu->eeprom_regulatory = 0; |
| } |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "eeprom_regulatory = 0x%x\n", |
| efu->eeprom_regulatory); |
| } |
| |
| static void _rtl8822be_read_pa_type(struct ieee80211_hw *hw, u8 *hwinfo, |
| bool autoload_fail) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| |
| if (!autoload_fail) { |
| rtlhal->pa_type_2g = hwinfo[EEPROM_2G_5G_PA_TYPE_8822B]; |
| rtlhal->lna_type_2g = |
| hwinfo[EEPROM_2G_LNA_TYPE_GAIN_SEL_AB_8822B]; |
| if (rtlhal->pa_type_2g == 0xFF) |
| rtlhal->pa_type_2g = 0; |
| if (rtlhal->lna_type_2g == 0xFF) |
| rtlhal->lna_type_2g = 0; |
| |
| rtlhal->external_pa_2g = (rtlhal->pa_type_2g & BIT(4)) ? 1 : 0; |
| rtlhal->external_lna_2g = |
| (rtlhal->lna_type_2g & BIT(3)) ? 1 : 0; |
| |
| rtlhal->pa_type_5g = hwinfo[EEPROM_2G_5G_PA_TYPE_8822B]; |
| rtlhal->lna_type_5g = |
| hwinfo[EEPROM_5G_LNA_TYPE_GAIN_SEL_AB_8822B]; |
| if (rtlhal->pa_type_5g == 0xFF) |
| rtlhal->pa_type_5g = 0; |
| if (rtlhal->lna_type_5g == 0xFF) |
| rtlhal->lna_type_5g = 0; |
| |
| rtlhal->external_pa_5g = (rtlhal->pa_type_5g & BIT(0)) ? 1 : 0; |
| rtlhal->external_lna_5g = |
| (rtlhal->lna_type_5g & BIT(3)) ? 1 : 0; |
| } else { |
| rtlhal->external_pa_2g = 0; |
| rtlhal->external_lna_2g = 0; |
| rtlhal->external_pa_5g = 0; |
| rtlhal->external_lna_5g = 0; |
| } |
| } |
| |
| static void _rtl8822be_read_amplifier_type(struct ieee80211_hw *hw, u8 *hwinfo, |
| bool autoload_fail) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| |
| u8 ext_type_pa_2g_a = |
| (hwinfo[EEPROM_2G_LNA_TYPE_GAIN_SEL_AB_8822B] & BIT(2)) >> |
| 2; /* 0xBD[2] */ |
| u8 ext_type_pa_2g_b = |
| (hwinfo[EEPROM_2G_LNA_TYPE_GAIN_SEL_AB_8822B] & BIT(6)) >> |
| 6; /* 0xBD[6] */ |
| u8 ext_type_pa_5g_a = |
| (hwinfo[EEPROM_5G_LNA_TYPE_GAIN_SEL_AB_8822B] & BIT(2)) >> |
| 2; /* 0xBF[2] */ |
| u8 ext_type_pa_5g_b = |
| (hwinfo[EEPROM_5G_LNA_TYPE_GAIN_SEL_AB_8822B] & BIT(6)) >> |
| 6; /* 0xBF[6] */ |
| u8 ext_type_lna_2g_a = (hwinfo[EEPROM_2G_LNA_TYPE_GAIN_SEL_AB_8822B] & |
| (BIT(1) | BIT(0))) >> |
| 0; /* 0xBD[1:0] */ |
| u8 ext_type_lna_2g_b = (hwinfo[EEPROM_2G_LNA_TYPE_GAIN_SEL_AB_8822B] & |
| (BIT(5) | BIT(4))) >> |
| 4; /* 0xBD[5:4] */ |
| u8 ext_type_lna_5g_a = (hwinfo[EEPROM_5G_LNA_TYPE_GAIN_SEL_AB_8822B] & |
| (BIT(1) | BIT(0))) >> |
| 0; /* 0xBF[1:0] */ |
| u8 ext_type_lna_5g_b = (hwinfo[EEPROM_5G_LNA_TYPE_GAIN_SEL_AB_8822B] & |
| (BIT(5) | BIT(4))) >> |
| 4; /* 0xBF[5:4] */ |
| |
| _rtl8822be_read_pa_type(hw, hwinfo, autoload_fail); |
| |
| /* [2.4G] Path A and B are both extPA */ |
| if ((rtlhal->pa_type_2g & (BIT(5) | BIT(4))) == (BIT(5) | BIT(4))) |
| rtlhal->type_gpa = ext_type_pa_2g_b << 2 | ext_type_pa_2g_a; |
| |
| /* [5G] Path A and B are both extPA */ |
| if ((rtlhal->pa_type_5g & (BIT(1) | BIT(0))) == (BIT(1) | BIT(0))) |
| rtlhal->type_apa = ext_type_pa_5g_b << 2 | ext_type_pa_5g_a; |
| |
| /* [2.4G] Path A and B are both extLNA */ |
| if ((rtlhal->lna_type_2g & (BIT(7) | BIT(3))) == (BIT(7) | BIT(3))) |
| rtlhal->type_glna = ext_type_lna_2g_b << 2 | ext_type_lna_2g_a; |
| |
| /* [5G] Path A and B are both extLNA */ |
| if ((rtlhal->lna_type_5g & (BIT(7) | BIT(3))) == (BIT(7) | BIT(3))) |
| rtlhal->type_alna = ext_type_lna_5g_b << 2 | ext_type_lna_5g_a; |
| } |
| |
| static void _rtl8822be_read_rfe_type(struct ieee80211_hw *hw, u8 *hwinfo, |
| bool autoload_fail) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| |
| if (!autoload_fail) |
| rtlhal->rfe_type = hwinfo[EEPROM_RFE_OPTION_8822B]; |
| else |
| rtlhal->rfe_type = 0; |
| |
| if (rtlhal->rfe_type == 0xFF) |
| rtlhal->rfe_type = 0; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "RFE Type: 0x%2x\n", |
| rtlhal->rfe_type); |
| } |
| |
| static void _rtl8822be_read_adapter_info(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| struct rtl_halmac_ops *halmac_ops = rtlpriv->halmac.ops; |
| u16 i, usvalue; |
| u8 *hwinfo; |
| u16 eeprom_id; |
| u32 efuse_size; |
| int err; |
| |
| if (rtlefuse->epromtype != EEPROM_BOOT_EFUSE) { |
| pr_err("RTL8822B Not boot from efuse!!"); |
| return; |
| } |
| |
| /* read logical efuse size (normalely, 0x0300) */ |
| err = halmac_ops->halmac_get_logical_efuse_size(rtlpriv, &efuse_size); |
| |
| if (err || !efuse_size) { |
| pr_err("halmac_get_logical_efuse_size err=%d efuse_size=0x%X", |
| err, efuse_size); |
| efuse_size = HWSET_MAX_SIZE; |
| } |
| |
| if (efuse_size > HWSET_MAX_SIZE) { |
| pr_err("halmac_get_logical_efuse_size efuse_size=0x%X > 0x%X", |
| efuse_size, HWSET_MAX_SIZE); |
| efuse_size = HWSET_MAX_SIZE; |
| } |
| |
| /* read efuse */ |
| hwinfo = kzalloc(efuse_size, GFP_KERNEL); |
| |
| err = halmac_ops->halmac_read_logical_efuse_map(rtlpriv, hwinfo, |
| efuse_size); |
| if (err) { |
| pr_err("%s: <ERROR> fail to get efuse map!\n", __func__); |
| goto label_end; |
| } |
| |
| /* copy to efuse_map (need?) */ |
| memcpy(&rtlefuse->efuse_map[EFUSE_INIT_MAP][0], hwinfo, |
| EFUSE_MAX_LOGICAL_SIZE); |
| memcpy(&rtlefuse->efuse_map[EFUSE_MODIFY_MAP][0], hwinfo, |
| EFUSE_MAX_LOGICAL_SIZE); |
| |
| /* parse content */ |
| RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP\n", hwinfo, |
| HWSET_MAX_SIZE); |
| |
| eeprom_id = *((u16 *)&hwinfo[0]); |
| if (eeprom_id != RTL8822B_EEPROM_ID) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, |
| "EEPROM ID(%#x) is invalid!!\n", eeprom_id); |
| rtlefuse->autoload_failflag = true; |
| } else { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); |
| rtlefuse->autoload_failflag = false; |
| } |
| |
| if (rtlefuse->autoload_failflag) |
| goto label_end; |
| |
| /*VID DID SVID SDID*/ |
| rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID]; |
| rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID]; |
| rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID]; |
| rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID]; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROMId = 0x%4x\n", eeprom_id); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM VID = 0x%4x\n", |
| rtlefuse->eeprom_vid); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM DID = 0x%4x\n", |
| rtlefuse->eeprom_did); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM SVID = 0x%4x\n", |
| rtlefuse->eeprom_svid); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM SMID = 0x%4x\n", |
| rtlefuse->eeprom_smid); |
| /*customer ID*/ |
| rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOM_ID_8822B]; |
| if (rtlefuse->eeprom_oemid == 0xFF) |
| rtlefuse->eeprom_oemid = 0; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x\n", |
| rtlefuse->eeprom_oemid); |
| /*EEPROM version*/ |
| rtlefuse->eeprom_version = *(u8 *)&hwinfo[EEPROM_VERSION_8822B]; |
| /*mac address*/ |
| for (i = 0; i < 6; i += 2) { |
| usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_8822BE + i]; |
| *((u16 *)(&rtlefuse->dev_addr[i])) = usvalue; |
| } |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "dev_addr: %pM\n", |
| rtlefuse->dev_addr); |
| |
| /* channel plan */ |
| rtlefuse->eeprom_channelplan = |
| *(u8 *)&hwinfo[EEPROM_CHANNEL_PLAN_8822B]; |
| |
| /* set channel plan from efuse */ |
| rtlefuse->channel_plan = rtlefuse->eeprom_channelplan; |
| if (rtlefuse->channel_plan == 0xFF) |
| rtlefuse->channel_plan = 0x7f; /* use 2G + 5G as default */ |
| |
| /*tx power*/ |
| _rtl8822be_read_txpower_info_from_hwpg(hw, rtlefuse->autoload_failflag, |
| hwinfo); |
| |
| rtl8822be_read_bt_coexist_info_from_hwpg( |
| hw, rtlefuse->autoload_failflag, hwinfo); |
| |
| /*amplifier type*/ |
| _rtl8822be_read_amplifier_type(hw, hwinfo, rtlefuse->autoload_failflag); |
| |
| /*rfe type*/ |
| _rtl8822be_read_rfe_type(hw, hwinfo, rtlefuse->autoload_failflag); |
| |
| /*board type*/ |
| rtlefuse->board_type = |
| (((*(u8 *)&hwinfo[EEPROM_RF_BOARD_OPTION_8822B]) & 0xE0) >> 5); |
| if ((*(u8 *)&hwinfo[EEPROM_RF_BOARD_OPTION_8822B]) == 0xFF) |
| rtlefuse->board_type = 0; |
| |
| if (rtlpriv->btcoexist.btc_info.btcoexist == 1) |
| rtlefuse->board_type |= BIT(2); /* ODM_BOARD_BT */ |
| |
| /* phydm maintain rtlhal->board_type and rtlhal->package_type */ |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "board_type = 0x%x\n", |
| rtlefuse->board_type); |
| /*parse xtal*/ |
| rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_8822B]; |
| if (hwinfo[EEPROM_XTAL_8822B] == 0xFF) |
| rtlefuse->crystalcap = 0; /*0x20;*/ |
| |
| /*antenna diversity*/ |
| rtlefuse->antenna_div_type = 0; |
| rtlefuse->antenna_div_cfg = 0; |
| |
| label_end: |
| kfree(hwinfo); |
| } |
| |
| static void _rtl8822be_hal_customized_behavior(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| |
| pcipriv->ledctl.led_opendrain = true; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RT Customized ID: 0x%02X\n", |
| rtlhal->oem_id); |
| } |
| |
| static void _rtl8822be_read_pa_bias(struct ieee80211_hw *hw, |
| struct rtl_phydm_params *params) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_halmac_ops *halmac_ops = rtlpriv->halmac.ops; |
| u32 size; |
| u8 *map = NULL; |
| |
| /* fill default values */ |
| params->efuse0x3d7 = 0xFF; |
| params->efuse0x3d8 = 0xFF; |
| |
| if (halmac_ops->halmac_get_physical_efuse_size(rtlpriv, &size)) |
| goto err; |
| |
| map = kmalloc(size, GFP_KERNEL); |
| if (!map) |
| goto err; |
| |
| if (halmac_ops->halmac_read_physical_efuse_map(rtlpriv, map, size)) |
| goto err; |
| |
| params->efuse0x3d7 = map[0x3d7]; |
| params->efuse0x3d8 = map[0x3d8]; |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, |
| "efuse0x3d7 = 0x%2x, efuse0x3d8 = 0x%2x\n", |
| params->efuse0x3d7, params->efuse0x3d8); |
| |
| err: |
| kfree(map); |
| } |
| |
| void rtl8822be_read_eeprom_info(struct ieee80211_hw *hw, |
| struct rtl_phydm_params *params) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| struct rtl_phy *rtlphy = &rtlpriv->phy; |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u8 tmp_u1b; |
| |
| rtlhal->version = _rtl8822be_read_chip_version(hw); |
| |
| params->mp_chip = (rtlhal->version & BIT_RTL_ID_8822B) ? 0 : 1; |
| params->fab_ver = BIT_GET_VENDOR_ID_8822B(rtlhal->version) >> 2; |
| params->cut_ver = BIT_GET_CHIP_VER_8822B(rtlhal->version); |
| |
| /* fab_ver mapping */ |
| if (params->fab_ver == 2) |
| params->fab_ver = 1; |
| else if (params->fab_ver == 1) |
| params->fab_ver = 2; |
| |
| /* read PA bias: params->efuse0x3d7/efuse0x3d8 */ |
| _rtl8822be_read_pa_bias(hw, params); |
| |
| if (get_rf_type(rtlphy) == RF_1T1R) |
| rtlpriv->dm.rfpath_rxenable[0] = true; |
| else |
| rtlpriv->dm.rfpath_rxenable[0] = |
| rtlpriv->dm.rfpath_rxenable[1] = true; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "VersionID = 0x%4x\n", |
| rtlhal->version); |
| tmp_u1b = rtl_read_byte(rtlpriv, REG_SYS_EEPROM_CTRL_8822B); |
| if (tmp_u1b & BIT(4)) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n"); |
| rtlefuse->epromtype = EEPROM_93C46; |
| } else { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n"); |
| rtlefuse->epromtype = EEPROM_BOOT_EFUSE; |
| } |
| if (tmp_u1b & BIT(5)) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); |
| rtlefuse->autoload_failflag = false; |
| _rtl8822be_read_adapter_info(hw); |
| } else { |
| pr_err("Autoload ERR!!\n"); |
| } |
| _rtl8822be_hal_customized_behavior(hw); |
| |
| rtlphy->rfpath_rx_enable[0] = true; |
| if (rtlphy->rf_type == RF_2T2R) |
| rtlphy->rfpath_rx_enable[1] = true; |
| } |
| |
| void rtl8822be_read_eeprom_info_dummy(struct ieee80211_hw *hw) |
| { |
| /* |
| * 8822b use halmac, so |
| * move rtl8822be_read_eeprom_info() to rtl8822be_init_sw_vars() |
| * after halmac_init_adapter(). |
| */ |
| } |
| |
| static u32 _rtl8822be_rate_to_bitmap_2ssvht(__le16 vht_rate) |
| { |
| u8 i, j, tmp_rate; |
| u32 rate_bitmap = 0; |
| |
| for (i = j = 0; i < 4; i += 2, j += 10) { |
| tmp_rate = (le16_to_cpu(vht_rate) >> i) & 3; |
| |
| switch (tmp_rate) { |
| case 2: |
| rate_bitmap = rate_bitmap | (0x03ff << j); |
| break; |
| |
| case 1: |
| rate_bitmap = rate_bitmap | (0x01ff << j); |
| break; |
| |
| case 0: |
| rate_bitmap = rate_bitmap | (0x00ff << j); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| return rate_bitmap; |
| } |
| |
| static u8 _rtl8822be_get_vht_en(enum wireless_mode wirelessmode, |
| u32 ratr_bitmap) |
| { |
| u8 ret = 0; |
| |
| if (wirelessmode < WIRELESS_MODE_N_24G) { |
| ret = 0; |
| } else if (wirelessmode == WIRELESS_MODE_AC_24G) { |
| if (ratr_bitmap & 0xfff00000) /* Mix , 2SS */ |
| ret = 3; |
| else /* Mix, 1SS */ |
| ret = 2; |
| } else if (wirelessmode == WIRELESS_MODE_AC_5G) { |
| ret = 1; |
| } /* VHT */ |
| |
| return ret << 4; |
| } |
| |
| static u8 _rtl8822be_get_ra_ldpc(struct ieee80211_hw *hw, u8 mac_id, |
| struct rtl_sta_info *sta_entry, |
| enum wireless_mode wirelessmode) |
| { |
| u8 b_ldpc = 0; |
| /*not support ldpc, do not open*/ |
| return b_ldpc << 2; |
| } |
| |
| static u8 _rtl8822be_get_ra_rftype(struct ieee80211_hw *hw, |
| enum wireless_mode wirelessmode, |
| u32 ratr_bitmap) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &rtlpriv->phy; |
| u8 rf_type = RF_1T1R; |
| |
| if (rtlphy->rf_type == RF_1T1R) { |
| rf_type = RF_1T1R; |
| } else if (wirelessmode == WIRELESS_MODE_AC_5G || |
| wirelessmode == WIRELESS_MODE_AC_24G || |
| wirelessmode == WIRELESS_MODE_AC_ONLY) { |
| if (ratr_bitmap & 0xffc00000) |
| rf_type = RF_2T2R; |
| } else if (wirelessmode == WIRELESS_MODE_N_5G || |
| wirelessmode == WIRELESS_MODE_N_24G) { |
| if (ratr_bitmap & 0xfff00000) |
| rf_type = RF_2T2R; |
| } |
| |
| return rf_type; |
| } |
| |
| static bool _rtl8822be_get_ra_shortgi(struct ieee80211_hw *hw, |
| struct ieee80211_sta *sta, u8 mac_id) |
| { |
| bool b_short_gi = false; |
| u8 b_curshortgi_40mhz = |
| (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; |
| u8 b_curshortgi_20mhz = |
| (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1 : 0; |
| u8 b_curshortgi_80mhz = 0; |
| |
| b_curshortgi_80mhz = |
| (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80) ? 1 : 0; |
| |
| if (mac_id == 99 /*MAC_ID_STATIC_FOR_BROADCAST_MULTICAST*/) |
| b_short_gi = false; |
| |
| if (b_curshortgi_40mhz || b_curshortgi_80mhz || b_curshortgi_20mhz) |
| b_short_gi = true; |
| |
| return b_short_gi; |
| } |
| |
| static void rtl8822be_update_hal_rate_mask(struct ieee80211_hw *hw, |
| struct ieee80211_sta *sta, |
| u8 rssi_level, bool update_bw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &rtlpriv->phy; |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_sta_info *sta_entry = NULL; |
| u32 ratr_bitmap, ratr_bitmap_msb = 0; |
| u8 ratr_index; |
| enum wireless_mode wirelessmode = 0; |
| u8 curtxbw_40mhz = |
| (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ? 1 : 0; |
| bool b_shortgi = false; |
| u8 rate_mask[7]; |
| u8 macid = 0; |
| u8 rf_type; |
| |
| sta_entry = (struct rtl_sta_info *)sta->drv_priv; |
| wirelessmode = sta_entry->wireless_mode; |
| |
| RT_TRACE(rtlpriv, COMP_RATR, DBG_LOUD, "wireless mode = 0x%x\n", |
| wirelessmode); |
| if (mac->opmode == NL80211_IFTYPE_STATION || |
| mac->opmode == NL80211_IFTYPE_MESH_POINT) { |
| curtxbw_40mhz = mac->bw_40; |
| } else if (mac->opmode == NL80211_IFTYPE_AP || |
| mac->opmode == NL80211_IFTYPE_ADHOC) |
| macid = sta->aid + 1; |
| if (wirelessmode == WIRELESS_MODE_N_5G || |
| wirelessmode == WIRELESS_MODE_AC_5G || |
| wirelessmode == WIRELESS_MODE_A) |
| ratr_bitmap = (sta->supp_rates[NL80211_BAND_5GHZ]) << 4; |
| else |
| ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ]; |
| |
| if (mac->opmode == NL80211_IFTYPE_ADHOC) |
| ratr_bitmap = 0xfff; |
| |
| if (wirelessmode == WIRELESS_MODE_N_24G || |
| wirelessmode == WIRELESS_MODE_N_5G) |
| ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | |
| sta->ht_cap.mcs.rx_mask[0] << 12); |
| else if (wirelessmode == WIRELESS_MODE_AC_24G || |
| wirelessmode == WIRELESS_MODE_AC_5G || |
| wirelessmode == WIRELESS_MODE_AC_ONLY) |
| ratr_bitmap |= _rtl8822be_rate_to_bitmap_2ssvht( |
| sta->vht_cap.vht_mcs.rx_mcs_map) |
| << 12; |
| |
| b_shortgi = _rtl8822be_get_ra_shortgi(hw, sta, macid); |
| rf_type = _rtl8822be_get_ra_rftype(hw, wirelessmode, ratr_bitmap); |
| |
| ratr_index = rtlpriv->phydm.ops->phydm_rate_id_mapping( |
| rtlpriv, wirelessmode, rf_type, rtlphy->current_chan_bw); |
| sta_entry->ratr_index = ratr_index; |
| |
| rtlpriv->phydm.ops->phydm_get_ra_bitmap( |
| rtlpriv, wirelessmode, rf_type, rtlphy->current_chan_bw, |
| rssi_level, &ratr_bitmap_msb, &ratr_bitmap); |
| |
| RT_TRACE(rtlpriv, COMP_RATR, DBG_LOUD, "ratr_bitmap :%x\n", |
| ratr_bitmap); |
| |
| rate_mask[0] = macid; |
| rate_mask[1] = ratr_index | (b_shortgi ? 0x80 : 0x00); |
| rate_mask[2] = |
| rtlphy->current_chan_bw | ((!update_bw) << 3) | |
| _rtl8822be_get_vht_en(wirelessmode, ratr_bitmap) | |
| _rtl8822be_get_ra_ldpc(hw, macid, sta_entry, wirelessmode); |
| |
| rate_mask[3] = (u8)(ratr_bitmap & 0x000000ff); |
| rate_mask[4] = (u8)((ratr_bitmap & 0x0000ff00) >> 8); |
| rate_mask[5] = (u8)((ratr_bitmap & 0x00ff0000) >> 16); |
| rate_mask[6] = (u8)((ratr_bitmap & 0xff000000) >> 24); |
| |
| RT_TRACE( |
| rtlpriv, COMP_RATR, DBG_DMESG, |
| "Rate_index:%x, ratr_val:%08x, %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", |
| ratr_index, ratr_bitmap, rate_mask[0], rate_mask[1], |
| rate_mask[2], rate_mask[3], rate_mask[4], rate_mask[5], |
| rate_mask[6]); |
| rtl8822be_fill_h2c_cmd(hw, H2C_8822B_MACID_CFG, 7, rate_mask); |
| |
| /* for h2c cmd 0x46, only modify cmd id & ra mask */ |
| /* Keep rate_mask0~2 of cmd 0x40, but clear byte3 and later */ |
| /* 8822B has no 3SS, so keep it zeros. */ |
| memset(rate_mask + 3, 0, 4); |
| |
| rtl8822be_fill_h2c_cmd(hw, H2C_8822B_MACID_CFG_3SS, 7, rate_mask); |
| |
| _rtl8822be_set_bcn_ctrl_reg(hw, BIT(3), 0); |
| } |
| |
| void rtl8822be_update_hal_rate_tbl(struct ieee80211_hw *hw, |
| struct ieee80211_sta *sta, u8 rssi_level, |
| bool update_bw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| if (rtlpriv->dm.useramask) |
| rtl8822be_update_hal_rate_mask(hw, sta, rssi_level, update_bw); |
| } |
| |
| void rtl8822be_update_channel_access_setting(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| u16 sifs_timer; |
| |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, |
| (u8 *)&mac->slot_time); |
| if (!mac->ht_enable) |
| sifs_timer = 0x0a0a; |
| else |
| sifs_timer = 0x0e0e; |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer); |
| } |
| |
| bool rtl8822be_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) |
| { |
| *valid = 1; |
| return true; |
| } |
| |
| void rtl8822be_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr, |
| bool is_group, u8 enc_algo, bool is_wepkey, |
| bool clear_all) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u8 *macaddr = p_macaddr; |
| u32 entry_id = 0; |
| bool is_pairwise = false; |
| |
| static u8 cam_const_addr[4][6] = { |
| {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, |
| {0x00, 0x00, 0x00, 0x00, 0x00, 0x01}, |
| {0x00, 0x00, 0x00, 0x00, 0x00, 0x02}, |
| {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}, |
| }; |
| static u8 cam_const_broad[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| |
| if (clear_all) { |
| u8 idx = 0; |
| u8 cam_offset = 0; |
| u8 clear_number = 5; |
| |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n"); |
| |
| for (idx = 0; idx < clear_number; idx++) { |
| rtl_cam_mark_invalid(hw, cam_offset + idx); |
| rtl_cam_empty_entry(hw, cam_offset + idx); |
| |
| if (idx < 5) { |
| memset(rtlpriv->sec.key_buf[idx], 0, |
| MAX_KEY_LEN); |
| rtlpriv->sec.key_len[idx] = 0; |
| } |
| } |
| |
| return; |
| } |
| |
| switch (enc_algo) { |
| case WEP40_ENCRYPTION: |
| enc_algo = CAM_WEP40; |
| break; |
| case WEP104_ENCRYPTION: |
| enc_algo = CAM_WEP104; |
| break; |
| case TKIP_ENCRYPTION: |
| enc_algo = CAM_TKIP; |
| break; |
| case AESCCMP_ENCRYPTION: |
| enc_algo = CAM_AES; |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD, |
| "switch case %#x not processed\n", enc_algo); |
| enc_algo = CAM_TKIP; |
| break; |
| } |
| |
| if (is_wepkey || rtlpriv->sec.use_defaultkey) { |
| macaddr = cam_const_addr[key_index]; |
| entry_id = key_index; |
| } else { |
| if (is_group) { |
| macaddr = cam_const_broad; |
| entry_id = key_index; |
| } else { |
| if (mac->opmode == NL80211_IFTYPE_AP) { |
| entry_id = |
| rtl_cam_get_free_entry(hw, p_macaddr); |
| if (entry_id >= TOTAL_CAM_ENTRY) { |
| pr_err("Can not find free hwsecurity cam entry\n"); |
| return; |
| } |
| } else { |
| entry_id = CAM_PAIRWISE_KEY_POSITION; |
| } |
| |
| key_index = PAIRWISE_KEYIDX; |
| is_pairwise = true; |
| } |
| } |
| |
| if (rtlpriv->sec.key_len[key_index] == 0) { |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, |
| "delete one entry, entry_id is %d\n", entry_id); |
| if (mac->opmode == NL80211_IFTYPE_AP) |
| rtl_cam_del_entry(hw, p_macaddr); |
| rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); |
| } else { |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "add one entry\n"); |
| if (is_pairwise) { |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, |
| "set Pairwise key\n"); |
| |
| rtl_cam_add_one_entry(hw, macaddr, key_index, entry_id, |
| enc_algo, CAM_CONFIG_NO_USEDK, |
| rtlpriv->sec.key_buf[key_index]); |
| } else { |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, |
| "set group key\n"); |
| |
| if (mac->opmode == NL80211_IFTYPE_ADHOC) { |
| rtl_cam_add_one_entry( |
| hw, rtlefuse->dev_addr, PAIRWISE_KEYIDX, |
| CAM_PAIRWISE_KEY_POSITION, enc_algo, |
| CAM_CONFIG_NO_USEDK, |
| rtlpriv->sec.key_buf[entry_id]); |
| } |
| |
| rtl_cam_add_one_entry(hw, macaddr, key_index, entry_id, |
| enc_algo, CAM_CONFIG_NO_USEDK, |
| rtlpriv->sec.key_buf[entry_id]); |
| } |
| } |
| } |
| |
| void rtl8822be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw, |
| bool auto_load_fail, u8 *hwinfo) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 value; |
| u32 val32; |
| |
| val32 = rtl_read_dword(rtlpriv, REG_WL_BT_PWR_CTRL_8822B); |
| if (val32 & BIT_BT_FUNC_EN_8822B) |
| rtlpriv->btcoexist.btc_info.btcoexist = 1; |
| else |
| rtlpriv->btcoexist.btc_info.btcoexist = 0; |
| |
| if (!auto_load_fail) { |
| value = hwinfo[EEPROM_RF_BT_SETTING_8822B]; |
| |
| rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8822B; |
| rtlpriv->btcoexist.btc_info.ant_num = |
| (value & BIT(0) ? ANT_TOTAL_X1 : ANT_TOTAL_X2); |
| } else { |
| rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8822B; |
| rtlpriv->btcoexist.btc_info.ant_num = ANT_TOTAL_X2; |
| } |
| } |
| |
| void rtl8822be_bt_reg_init(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| /* 0:Low, 1:High, 2:From Efuse. */ |
| rtlpriv->btcoexist.reg_bt_iso = 2; |
| /* 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter. */ |
| rtlpriv->btcoexist.reg_bt_sco = 3; |
| /* 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU. */ |
| rtlpriv->btcoexist.reg_bt_sco = 0; |
| } |
| |
| void rtl8822be_suspend(struct ieee80211_hw *hw) {} |
| |
| void rtl8822be_resume(struct ieee80211_hw *hw) {} |