| /****************************************************************************** |
| * |
| * Copyright(c) 2016 Realtek Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| *****************************************************************************/ |
| |
| #ifndef __RTL8822BE_PHY_H__ |
| #define __RTL8822BE_PHY_H__ |
| |
| /* It must always set to 4, otherwise read |
| * efuse table sequence will be wrong. |
| */ |
| #define MAX_TX_COUNT 4 |
| #define TX_1S 0 |
| #define TX_2S 1 |
| #define TX_3S 2 |
| #define TX_4S 3 |
| |
| #define MAX_POWER_INDEX 0x3F |
| |
| #define MAX_PRECMD_CNT 16 |
| #define MAX_RFDEPENDCMD_CNT 16 |
| #define MAX_POSTCMD_CNT 16 |
| |
| #define MAX_DOZE_WAITING_TIMES_9x 64 |
| |
| #define RT_CANNOT_IO(hw) false |
| #define HIGHPOWER_RADIOA_ARRAYLEN 22 |
| |
| #define IQK_ADDA_REG_NUM 16 |
| #define IQK_BB_REG_NUM 9 |
| #define MAX_TOLERANCE 5 |
| #define IQK_DELAY_TIME 10 |
| #define index_mapping_NUM 15 |
| |
| #define APK_BB_REG_NUM 5 |
| #define APK_AFE_REG_NUM 16 |
| #define APK_CURVE_REG_NUM 4 |
| #define PATH_NUM 2 |
| |
| #define LOOP_LIMIT 5 |
| #define MAX_STALL_TIME 50 |
| #define ANTENNA_DIVERSITY_VALUE 0x80 |
| #define MAX_TXPWR_IDX_NMODE_92S 63 |
| #define RESET_CNT_LIMIT 3 |
| |
| #define IQK_ADDA_REG_NUM 16 |
| #define IQK_MAC_REG_NUM 4 |
| |
| #define RF6052_MAX_PATH 2 |
| |
| #define CT_OFFSET_MAC_ADDR 0X16 |
| |
| #define CT_OFFSET_CCK_TX_PWR_IDX 0x5A |
| #define CT_OFFSET_HT401S_TX_PWR_IDX 0x60 |
| #define CT_OFFSET_HT402S_TX_PWR_IDX_DIFF 0x66 |
| #define CT_OFFSET_HT20_TX_PWR_IDX_DIFF 0x69 |
| #define CT_OFFSET_OFDM_TX_PWR_IDX_DIFF 0x6C |
| |
| #define CT_OFFSET_HT40_MAX_PWR_OFFSET 0x6F |
| #define CT_OFFSET_HT20_MAX_PWR_OFFSET 0x72 |
| |
| #define CT_OFFSET_CHANNEL_PLAH 0x75 |
| #define CT_OFFSET_THERMAL_METER 0x78 |
| #define CT_OFFSET_RF_OPTION 0x79 |
| #define CT_OFFSET_VERSION 0x7E |
| #define CT_OFFSET_CUSTOMER_ID 0x7F |
| |
| #define RTL8822BE_MAX_PATH_NUM 2 |
| |
| #define TARGET_CHNL_NUM_2G_5G_8822B 59 |
| |
| u32 rtl8822be_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, |
| u32 bitmask); |
| void rtl8822be_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask, |
| u32 data); |
| u32 rtl8822be_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, |
| u32 regaddr, u32 bitmask); |
| void rtl8822be_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, |
| u32 regaddr, u32 bitmask, u32 data); |
| bool rtl8822be_phy_bb_config(struct ieee80211_hw *hw); |
| bool rtl8822be_phy_rf_config(struct ieee80211_hw *hw); |
| bool rtl8822be_halmac_cb_init_mac_register(struct rtl_priv *rtlpriv); |
| bool rtl8822be_halmac_cb_init_bb_rf_register(struct rtl_priv *rtlpriv); |
| void rtl8822be_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel); |
| void rtl8822be_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel); |
| void rtl8822be_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation); |
| void rtl8822be_phy_set_bw_mode_callback(struct ieee80211_hw *hw); |
| void rtl8822be_phy_set_bw_mode(struct ieee80211_hw *hw, |
| enum nl80211_channel_type ch_type); |
| u8 rtl8822be_phy_sw_chnl(struct ieee80211_hw *hw); |
| void rtl8822be_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery); |
| void rtl8822be_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery); |
| void rtl8822be_phy_ap_calibrate(struct ieee80211_hw *hw, char delta); |
| void rtl8822be_phy_lc_calibrate(struct ieee80211_hw *hw); |
| void rtl8822be_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain); |
| bool rtl8822be_phy_config_rf_with_headerfile(struct ieee80211_hw *hw, |
| enum radio_path rfpath); |
| bool rtl8822be_phy_config_rf_with_headerfile(struct ieee80211_hw *hw, |
| enum radio_path rfpath); |
| bool rtl8822be_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype); |
| bool rtl8822be_phy_set_rf_power_state(struct ieee80211_hw *hw, |
| enum rf_pwrstate rfpwr_state); |
| void rtl8822be_phy_set_txpower_level_by_path(struct ieee80211_hw *hw, |
| u8 channel, u8 path); |
| void rtl8822be_do_iqk(struct ieee80211_hw *hw, u8 delta_thermal_index, |
| u8 thermal_value, u8 threshold); |
| void rtl8822be_do_iqk(struct ieee80211_hw *hw, u8 delta_thermal_index, |
| u8 thermal_value, u8 threshold); |
| void rtl8822be_reset_iqk_result(struct ieee80211_hw *hw); |
| |
| u8 rtl8822be_get_txpower_index(struct ieee80211_hw *hw, u8 path, u8 rate, |
| u8 bandwidth, u8 channel); |
| void rtl8822be_phy_set_tx_power_index_by_rs(struct ieee80211_hw *hw, u8 channel, |
| u8 path, enum rate_section rs); |
| void rtl8822be_store_tx_power_by_rate(struct ieee80211_hw *hw, u32 band, |
| u32 rfpath, u32 txnum, u32 regaddr, |
| u32 bitmask, u32 data); |
| void rtl8822be_phy_set_txpower_limit(struct ieee80211_hw *hw, u8 *pregulation, |
| u8 *pband, u8 *pbandwidth, |
| u8 *prate_section, u8 *prf_path, |
| u8 *pchannel, u8 *ppower_limit); |
| bool rtl8822be_load_txpower_by_rate(struct ieee80211_hw *hw); |
| bool rtl8822be_load_txpower_limit(struct ieee80211_hw *hw); |
| |
| #endif |
