mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
During DT adaptation, the irq_alloc_desc was added into twl-core, but
due to the rather different and weird IRQ management required by the twl4030,
it is much better to have a different approach for it.
The issue is that twl4030 uses a two level IRQ mechanism but handles all the
PWR interrupts as part of the twl-core interrupt range. It ends up with a
range of 16 interrupts total for CORE and PWR.
The other twl4030 functionalities already have a dedicated driver and thus
their IRQs and irqdomain can and should be defined localy.
twl6030 is using a single level IRQ controller and thus does not require any
trick.
Move the irq_alloc_desc and irq_domain_add_legacy in twl4030-irq and
twl6030-irq.
Allocate together CORE and PWR IRQs for twl4030-irq.
Conflicts:
drivers/mfd/twl-core.c
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 712e262..764c5b5 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -147,9 +147,6 @@
#define TWL_MODULE_LAST TWL4030_MODULE_LAST
-#define TWL4030_NR_IRQS 8
-#define TWL6030_NR_IRQS 20
-
/* Base Address defns for twl4030_map[] */
/* subchip/slave 0 - USB ID */
@@ -1186,17 +1183,12 @@
twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
int irq_base;
- int irq_end;
int status;
unsigned i;
struct twl4030_platform_data *pdata = client->dev.platform_data;
struct device_node *node = client->dev.of_node;
u8 temp;
int ret = 0;
- int nr_irqs = TWL4030_NR_IRQS;
-
- if ((id->driver_data) & TWL6030_CLASS)
- nr_irqs = TWL6030_NR_IRQS;
if (node && !pdata) {
/*
@@ -1215,17 +1207,6 @@
return -EINVAL;
}
- status = irq_alloc_descs(-1, 0, nr_irqs, 0);
- if (IS_ERR_VALUE(status)) {
- dev_err(&client->dev, "Fail to allocate IRQ descs\n");
- return status;
- }
-
- irq_base = status;
- irq_end = irq_base + nr_irqs;
- irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
- &irq_domain_simple_ops, NULL);
-
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
return -EIO;
@@ -1280,15 +1261,15 @@
if (client->irq) {
if (twl_class_is_4030()) {
twl4030_init_chip_irq(id->name);
- status = twl4030_init_irq(client->irq, irq_base,
- irq_end);
+ irq_base = twl4030_init_irq(&client->dev, client->irq);
} else {
- status = twl6030_init_irq(client->irq, irq_base,
- irq_end);
+ irq_base = twl6030_init_irq(&client->dev, client->irq);
}
- if (status < 0)
+ if (irq_base < 0) {
+ status = irq_base;
goto fail;
+ }
}
/* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
