| /* |
| * OMAP3/4 Voltage Controller (VC) structure and macro definitions |
| * |
| * Copyright (C) 2007, 2010 Texas Instruments, Inc. |
| * Rajendra Nayak <rnayak@ti.com> |
| * Lesly A M <x0080970@ti.com> |
| * Thara Gopinath <thara@ti.com> |
| * |
| * Copyright (C) 2008, 2011 Nokia Corporation |
| * Kalle Jokiniemi |
| * Paul Walmsley |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| */ |
| #ifndef __ARCH_ARM_MACH_OMAP2_VC_H |
| #define __ARCH_ARM_MACH_OMAP2_VC_H |
| |
| #include <linux/kernel.h> |
| |
| struct voltagedomain; |
| |
| /** |
| * struct omap_vc_common - per-VC register/bitfield data |
| * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register |
| * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register |
| * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start |
| * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register |
| * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register |
| * @regaddr_shift: REGADDR field shift in PRM_VC_BYPASS_VAL register |
| * @cmd_on_shift: ON field shift in PRM_VC_CMD_VAL_* register |
| * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register |
| * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register |
| * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register |
| * @i2c_cfg_reg: I2C configuration register offset |
| * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register |
| * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register |
| * @i2c_mcode_mask: MCODE field mask for I2C config register |
| * |
| * XXX One of cmd_on_mask and cmd_on_shift are not needed |
| * XXX VALID should probably be a shift, not a mask |
| */ |
| struct omap_vc_common { |
| u32 cmd_on_mask; |
| u32 valid; |
| u8 bypass_val_reg; |
| u8 data_shift; |
| u8 slaveaddr_shift; |
| u8 regaddr_shift; |
| u8 cmd_on_shift; |
| u8 cmd_onlp_shift; |
| u8 cmd_ret_shift; |
| u8 cmd_off_shift; |
| u8 i2c_cfg_reg; |
| u8 i2c_cfg_clear_mask; |
| u8 i2c_cfg_hsen_mask; |
| u8 i2c_mcode_mask; |
| }; |
| |
| /* omap_vc_channel.flags values */ |
| #define OMAP_VC_CHANNEL_DEFAULT BIT(0) |
| #define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1) |
| |
| /** |
| * struct omap_vc_channel - VC per-instance data |
| * @i2c_slave_addr: I2C slave address of PMIC for this VC channel |
| * @volt_reg_addr: voltage configuration register address |
| * @cmd_reg_addr: command configuration register address |
| * @setup_time: setup time (in sys_clk cycles) of regulator for this channel |
| * @cfg_channel: current value of VC channel configuration register |
| * @i2c_high_speed: whether or not to use I2C high-speed mode |
| * |
| * @common: pointer to VC common data for this platform |
| * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register |
| * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register |
| * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register |
| * @cmdval_reg: register for on/ret/off voltage level values for this channel |
| * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start |
| * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start |
| * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start |
| * @cfg_channel_reg: VC channel configuration register |
| * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register |
| * @flags: VC channel-specific flags (optional) |
| */ |
| struct omap_vc_channel { |
| /* channel state */ |
| u16 i2c_slave_addr; |
| u16 volt_reg_addr; |
| u16 cmd_reg_addr; |
| u8 cfg_channel; |
| bool i2c_high_speed; |
| |
| /* register access data */ |
| const struct omap_vc_common *common; |
| u32 smps_sa_mask; |
| u32 smps_volra_mask; |
| u32 smps_cmdra_mask; |
| u8 cmdval_reg; |
| u8 smps_sa_reg; |
| u8 smps_volra_reg; |
| u8 smps_cmdra_reg; |
| u8 cfg_channel_reg; |
| u8 cfg_channel_sa_shift; |
| u8 flags; |
| }; |
| |
| extern struct omap_vc_channel omap3_vc_mpu; |
| extern struct omap_vc_channel omap3_vc_core; |
| |
| extern struct omap_vc_channel omap4_vc_mpu; |
| extern struct omap_vc_channel omap4_vc_iva; |
| extern struct omap_vc_channel omap4_vc_core; |
| |
| extern struct omap_vc_param omap3_mpu_vc_data; |
| extern struct omap_vc_param omap3_core_vc_data; |
| |
| extern struct omap_vc_param omap4_mpu_vc_data; |
| extern struct omap_vc_param omap4_iva_vc_data; |
| extern struct omap_vc_param omap4_core_vc_data; |
| |
| void omap3_vc_set_pmic_signaling(int core_next_state); |
| |
| |
| void omap_vc_init_channel(struct voltagedomain *voltdm); |
| int omap_vc_pre_scale(struct voltagedomain *voltdm, |
| unsigned long target_volt, |
| u8 *target_vsel, u8 *current_vsel); |
| void omap_vc_post_scale(struct voltagedomain *voltdm, |
| unsigned long target_volt, |
| u8 target_vsel, u8 current_vsel); |
| int omap_vc_bypass_scale(struct voltagedomain *voltdm, |
| unsigned long target_volt); |
| |
| #endif |
| |
