| /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ |
| /* |
| * bfin_sport.h - interface to Blackfin SPORTs |
| * |
| * Copyright 2004-2009 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #ifndef _UAPI__BFIN_SPORT_H__ |
| #define _UAPI__BFIN_SPORT_H__ |
| |
| /* Sport mode: it can be set to TDM, i2s or others */ |
| #define NORM_MODE 0x0 |
| #define TDM_MODE 0x1 |
| #define I2S_MODE 0x2 |
| #define NDSO_MODE 0x3 |
| |
| /* Data format, normal, a-law or u-law */ |
| #define NORM_FORMAT 0x0 |
| #define ALAW_FORMAT 0x2 |
| #define ULAW_FORMAT 0x3 |
| |
| /* Function driver which use sport must initialize the structure */ |
| struct sport_config { |
| /* TDM (multichannels), I2S or other mode */ |
| unsigned int mode:3; |
| unsigned int polled; /* use poll instead of irq when set */ |
| |
| /* if TDM mode is selected, channels must be set */ |
| int channels; /* Must be in 8 units */ |
| unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ |
| |
| /* I2S mode */ |
| unsigned int right_first:1; /* Right stereo channel first */ |
| |
| /* In mormal mode, the following item need to be set */ |
| unsigned int lsb_first:1; /* order of transmit or receive data */ |
| unsigned int fsync:1; /* Frame sync required */ |
| unsigned int data_indep:1; /* data independent frame sync generated */ |
| unsigned int act_low:1; /* Active low TFS */ |
| unsigned int late_fsync:1; /* Late frame sync */ |
| unsigned int tckfe:1; |
| unsigned int sec_en:1; /* Secondary side enabled */ |
| |
| /* Choose clock source */ |
| unsigned int int_clk:1; /* Internal or external clock */ |
| |
| /* If external clock is used, the following fields are ignored */ |
| int serial_clk; |
| int fsync_clk; |
| |
| unsigned int data_format:2; /* Normal, u-law or a-law */ |
| |
| int word_len; /* How length of the word in bits, 3-32 bits */ |
| int dma_enabled; |
| }; |
| |
| /* Userspace interface */ |
| #define SPORT_IOC_MAGIC 'P' |
| #define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) |
| #define SPORT_IOC_GET_SYSTEMCLOCK _IOR('P', 0x02, unsigned long) |
| #define SPORT_IOC_SET_BAUDRATE _IOW('P', 0x03, unsigned long) |
| |
| |
| /* SPORT_TCR1 Masks */ |
| #define TSPEN 0x0001 /* TX enable */ |
| #define ITCLK 0x0002 /* Internal TX Clock Select */ |
| #define TDTYPE 0x000C /* TX Data Formatting Select */ |
| #define DTYPE_NORM 0x0000 /* Data Format Normal */ |
| #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ |
| #define DTYPE_ALAW 0x000C /* Compand Using A-Law */ |
| #define TLSBIT 0x0010 /* TX Bit Order */ |
| #define ITFS 0x0200 /* Internal TX Frame Sync Select */ |
| #define TFSR 0x0400 /* TX Frame Sync Required Select */ |
| #define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ |
| #define LTFS 0x1000 /* Low TX Frame Sync Select */ |
| #define LATFS 0x2000 /* Late TX Frame Sync Select */ |
| #define TCKFE 0x4000 /* TX Clock Falling Edge Select */ |
| |
| /* SPORT_TCR2 Masks */ |
| #define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ |
| #define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) |
| #define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) |
| #define TXSE 0x0100 /* TX Secondary Enable */ |
| #define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ |
| #define TRFST 0x0400 /* TX Right-First Data Order */ |
| |
| /* SPORT_RCR1 Masks */ |
| #define RSPEN 0x0001 /* RX enable */ |
| #define IRCLK 0x0002 /* Internal RX Clock Select */ |
| #define RDTYPE 0x000C /* RX Data Formatting Select */ |
| /* DTYPE_* defined above */ |
| #define RLSBIT 0x0010 /* RX Bit Order */ |
| #define IRFS 0x0200 /* Internal RX Frame Sync Select */ |
| #define RFSR 0x0400 /* RX Frame Sync Required Select */ |
| #define LRFS 0x1000 /* Low RX Frame Sync Select */ |
| #define LARFS 0x2000 /* Late RX Frame Sync Select */ |
| #define RCKFE 0x4000 /* RX Clock Falling Edge Select */ |
| |
| /* SPORT_RCR2 Masks */ |
| /* SLEN defined above */ |
| #define RXSE 0x0100 /* RX Secondary Enable */ |
| #define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ |
| #define RRFST 0x0400 /* Right-First Data Order */ |
| |
| /* SPORT_STAT Masks */ |
| #define RXNE 0x0001 /* RX FIFO Not Empty Status */ |
| #define RUVF 0x0002 /* RX Underflow Status */ |
| #define ROVF 0x0004 /* RX Overflow Status */ |
| #define TXF 0x0008 /* TX FIFO Full Status */ |
| #define TUVF 0x0010 /* TX Underflow Status */ |
| #define TOVF 0x0020 /* TX Overflow Status */ |
| #define TXHRE 0x0040 /* TX Hold Register Empty */ |
| |
| /* SPORT_MCMC1 Masks */ |
| #define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ |
| #define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) |
| #define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) |
| #define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ |
| #define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) |
| #define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) |
| |
| /* SPORT_MCMC2 Masks */ |
| #define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ |
| #define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ |
| #define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ |
| #define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ |
| #define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ |
| #define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ |
| #define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ |
| #define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ |
| #define MFD 0xF000 /* Multichannel Frame Delay */ |
| #define DP_MFD(x) BFIN_DEPOSIT(MFD, x) |
| #define EX_MFD(x) BFIN_EXTRACT(MFD, x) |
| |
| #endif /* _UAPI__BFIN_SPORT_H__ */ |
