/*
 * Cryptographic API.
 *
 * Support for Samsung S5PV210 HW acceleration.
 *
 * Copyright (C) 2011 NetUP Inc. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as published
 * by the Free Software Foundation.
 *
 */

#include <linux/clk.h>
#include <linux/crypto.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>

#include <crypto/ctr.h>
#include <crypto/aes.h>
#include <crypto/algapi.h>
#include <crypto/scatterwalk.h>

#define _SBF(s, v)                      ((v) << (s))

/* Feed control registers */
#define SSS_REG_FCINTSTAT               0x0000
#define SSS_FCINTSTAT_BRDMAINT          BIT(3)
#define SSS_FCINTSTAT_BTDMAINT          BIT(2)
#define SSS_FCINTSTAT_HRDMAINT          BIT(1)
#define SSS_FCINTSTAT_PKDMAINT          BIT(0)

#define SSS_REG_FCINTENSET              0x0004
#define SSS_FCINTENSET_BRDMAINTENSET    BIT(3)
#define SSS_FCINTENSET_BTDMAINTENSET    BIT(2)
#define SSS_FCINTENSET_HRDMAINTENSET    BIT(1)
#define SSS_FCINTENSET_PKDMAINTENSET    BIT(0)

#define SSS_REG_FCINTENCLR              0x0008
#define SSS_FCINTENCLR_BRDMAINTENCLR    BIT(3)
#define SSS_FCINTENCLR_BTDMAINTENCLR    BIT(2)
#define SSS_FCINTENCLR_HRDMAINTENCLR    BIT(1)
#define SSS_FCINTENCLR_PKDMAINTENCLR    BIT(0)

#define SSS_REG_FCINTPEND               0x000C
#define SSS_FCINTPEND_BRDMAINTP         BIT(3)
#define SSS_FCINTPEND_BTDMAINTP         BIT(2)
#define SSS_FCINTPEND_HRDMAINTP         BIT(1)
#define SSS_FCINTPEND_PKDMAINTP         BIT(0)

#define SSS_REG_FCFIFOSTAT              0x0010
#define SSS_FCFIFOSTAT_BRFIFOFUL        BIT(7)
#define SSS_FCFIFOSTAT_BRFIFOEMP        BIT(6)
#define SSS_FCFIFOSTAT_BTFIFOFUL        BIT(5)
#define SSS_FCFIFOSTAT_BTFIFOEMP        BIT(4)
#define SSS_FCFIFOSTAT_HRFIFOFUL        BIT(3)
#define SSS_FCFIFOSTAT_HRFIFOEMP        BIT(2)
#define SSS_FCFIFOSTAT_PKFIFOFUL        BIT(1)
#define SSS_FCFIFOSTAT_PKFIFOEMP        BIT(0)

#define SSS_REG_FCFIFOCTRL              0x0014
#define SSS_FCFIFOCTRL_DESSEL           BIT(2)
#define SSS_HASHIN_INDEPENDENT          _SBF(0, 0x00)
#define SSS_HASHIN_CIPHER_INPUT         _SBF(0, 0x01)
#define SSS_HASHIN_CIPHER_OUTPUT        _SBF(0, 0x02)

#define SSS_REG_FCBRDMAS                0x0020
#define SSS_REG_FCBRDMAL                0x0024
#define SSS_REG_FCBRDMAC                0x0028
#define SSS_FCBRDMAC_BYTESWAP           BIT(1)
#define SSS_FCBRDMAC_FLUSH              BIT(0)

#define SSS_REG_FCBTDMAS                0x0030
#define SSS_REG_FCBTDMAL                0x0034
#define SSS_REG_FCBTDMAC                0x0038
#define SSS_FCBTDMAC_BYTESWAP           BIT(1)
#define SSS_FCBTDMAC_FLUSH              BIT(0)

#define SSS_REG_FCHRDMAS                0x0040
#define SSS_REG_FCHRDMAL                0x0044
#define SSS_REG_FCHRDMAC                0x0048
#define SSS_FCHRDMAC_BYTESWAP           BIT(1)
#define SSS_FCHRDMAC_FLUSH              BIT(0)

#define SSS_REG_FCPKDMAS                0x0050
#define SSS_REG_FCPKDMAL                0x0054
#define SSS_REG_FCPKDMAC                0x0058
#define SSS_FCPKDMAC_BYTESWAP           BIT(3)
#define SSS_FCPKDMAC_DESCEND            BIT(2)
#define SSS_FCPKDMAC_TRANSMIT           BIT(1)
#define SSS_FCPKDMAC_FLUSH              BIT(0)

#define SSS_REG_FCPKDMAO                0x005C

/* AES registers */
#define SSS_REG_AES_CONTROL		0x00
#define SSS_AES_BYTESWAP_DI             BIT(11)
#define SSS_AES_BYTESWAP_DO             BIT(10)
#define SSS_AES_BYTESWAP_IV             BIT(9)
#define SSS_AES_BYTESWAP_CNT            BIT(8)
#define SSS_AES_BYTESWAP_KEY            BIT(7)
#define SSS_AES_KEY_CHANGE_MODE         BIT(6)
#define SSS_AES_KEY_SIZE_128            _SBF(4, 0x00)
#define SSS_AES_KEY_SIZE_192            _SBF(4, 0x01)
#define SSS_AES_KEY_SIZE_256            _SBF(4, 0x02)
#define SSS_AES_FIFO_MODE               BIT(3)
#define SSS_AES_CHAIN_MODE_ECB          _SBF(1, 0x00)
#define SSS_AES_CHAIN_MODE_CBC          _SBF(1, 0x01)
#define SSS_AES_CHAIN_MODE_CTR          _SBF(1, 0x02)
#define SSS_AES_MODE_DECRYPT            BIT(0)

#define SSS_REG_AES_STATUS		0x04
#define SSS_AES_BUSY                    BIT(2)
#define SSS_AES_INPUT_READY             BIT(1)
#define SSS_AES_OUTPUT_READY            BIT(0)

#define SSS_REG_AES_IN_DATA(s)		(0x10 + (s << 2))
#define SSS_REG_AES_OUT_DATA(s)		(0x20 + (s << 2))
#define SSS_REG_AES_IV_DATA(s)		(0x30 + (s << 2))
#define SSS_REG_AES_CNT_DATA(s)		(0x40 + (s << 2))
#define SSS_REG_AES_KEY_DATA(s)		(0x80 + (s << 2))

#define SSS_REG(dev, reg)               ((dev)->ioaddr + (SSS_REG_##reg))
#define SSS_READ(dev, reg)              __raw_readl(SSS_REG(dev, reg))
#define SSS_WRITE(dev, reg, val)        __raw_writel((val), SSS_REG(dev, reg))

#define SSS_AES_REG(dev, reg)           ((dev)->aes_ioaddr + SSS_REG_##reg)
#define SSS_AES_WRITE(dev, reg, val)    __raw_writel((val), \
						SSS_AES_REG(dev, reg))

/* HW engine modes */
#define FLAGS_AES_DECRYPT               BIT(0)
#define FLAGS_AES_MODE_MASK             _SBF(1, 0x03)
#define FLAGS_AES_CBC                   _SBF(1, 0x01)
#define FLAGS_AES_CTR                   _SBF(1, 0x02)

#define AES_KEY_LEN         16
#define CRYPTO_QUEUE_LEN    1

/**
 * struct samsung_aes_variant - platform specific SSS driver data
 * @aes_offset: AES register offset from SSS module's base.
 *
 * Specifies platform specific configuration of SSS module.
 * Note: A structure for driver specific platform data is used for future
 * expansion of its usage.
 */
struct samsung_aes_variant {
	unsigned int			aes_offset;
};

struct s5p_aes_reqctx {
	unsigned long			mode;
};

struct s5p_aes_ctx {
	struct s5p_aes_dev		*dev;

	uint8_t				aes_key[AES_MAX_KEY_SIZE];
	uint8_t				nonce[CTR_RFC3686_NONCE_SIZE];
	int				keylen;
};

/**
 * struct s5p_aes_dev - Crypto device state container
 * @dev:	Associated device
 * @clk:	Clock for accessing hardware
 * @ioaddr:	Mapped IO memory region
 * @aes_ioaddr:	Per-varian offset for AES block IO memory
 * @irq_fc:	Feed control interrupt line
 * @req:	Crypto request currently handled by the device
 * @ctx:	Configuration for currently handled crypto request
 * @sg_src:	Scatter list with source data for currently handled block
 *		in device.  This is DMA-mapped into device.
 * @sg_dst:	Scatter list with destination data for currently handled block
 *		in device. This is DMA-mapped into device.
 * @sg_src_cpy:	In case of unaligned access, copied scatter list
 *		with source data.
 * @sg_dst_cpy:	In case of unaligned access, copied scatter list
 *		with destination data.
 * @tasklet:	New request scheduling jib
 * @queue:	Crypto queue
 * @busy:	Indicates whether the device is currently handling some request
 *		thus it uses some of the fields from this state, like:
 *		req, ctx, sg_src/dst (and copies).  This essentially
 *		protects against concurrent access to these fields.
 * @lock:	Lock for protecting both access to device hardware registers
 *		and fields related to current request (including the busy field).
 */
struct s5p_aes_dev {
	struct device			*dev;
	struct clk			*clk;
	void __iomem			*ioaddr;
	void __iomem			*aes_ioaddr;
	int				irq_fc;

	struct ablkcipher_request	*req;
	struct s5p_aes_ctx		*ctx;
	struct scatterlist		*sg_src;
	struct scatterlist		*sg_dst;

	struct scatterlist		*sg_src_cpy;
	struct scatterlist		*sg_dst_cpy;

	struct tasklet_struct		tasklet;
	struct crypto_queue		queue;
	bool				busy;
	spinlock_t			lock;
};

static struct s5p_aes_dev *s5p_dev;

static const struct samsung_aes_variant s5p_aes_data = {
	.aes_offset	= 0x4000,
};

static const struct samsung_aes_variant exynos_aes_data = {
	.aes_offset	= 0x200,
};

static const struct of_device_id s5p_sss_dt_match[] = {
	{
		.compatible = "samsung,s5pv210-secss",
		.data = &s5p_aes_data,
	},
	{
		.compatible = "samsung,exynos4210-secss",
		.data = &exynos_aes_data,
	},
	{ },
};
MODULE_DEVICE_TABLE(of, s5p_sss_dt_match);

static inline struct samsung_aes_variant *find_s5p_sss_version
				   (struct platform_device *pdev)
{
	if (IS_ENABLED(CONFIG_OF) && (pdev->dev.of_node)) {
		const struct of_device_id *match;

		match = of_match_node(s5p_sss_dt_match,
					pdev->dev.of_node);
		return (struct samsung_aes_variant *)match->data;
	}
	return (struct samsung_aes_variant *)
			platform_get_device_id(pdev)->driver_data;
}

static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
{
	SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg));
	SSS_WRITE(dev, FCBRDMAL, sg_dma_len(sg));
}

static void s5p_set_dma_outdata(struct s5p_aes_dev *dev, struct scatterlist *sg)
{
	SSS_WRITE(dev, FCBTDMAS, sg_dma_address(sg));
	SSS_WRITE(dev, FCBTDMAL, sg_dma_len(sg));
}

static void s5p_free_sg_cpy(struct s5p_aes_dev *dev, struct scatterlist **sg)
{
	int len;

	if (!*sg)
		return;

	len = ALIGN(dev->req->nbytes, AES_BLOCK_SIZE);
	free_pages((unsigned long)sg_virt(*sg), get_order(len));

	kfree(*sg);
	*sg = NULL;
}

static void s5p_sg_copy_buf(void *buf, struct scatterlist *sg,
			    unsigned int nbytes, int out)
{
	struct scatter_walk walk;

	if (!nbytes)
		return;

	scatterwalk_start(&walk, sg);
	scatterwalk_copychunks(buf, &walk, nbytes, out);
	scatterwalk_done(&walk, out, 0);
}

static void s5p_sg_done(struct s5p_aes_dev *dev)
{
	if (dev->sg_dst_cpy) {
		dev_dbg(dev->dev,
			"Copying %d bytes of output data back to original place\n",
			dev->req->nbytes);
		s5p_sg_copy_buf(sg_virt(dev->sg_dst_cpy), dev->req->dst,
				dev->req->nbytes, 1);
	}
	s5p_free_sg_cpy(dev, &dev->sg_src_cpy);
	s5p_free_sg_cpy(dev, &dev->sg_dst_cpy);
}

/* Calls the completion. Cannot be called with dev->lock hold. */
static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
{
	dev->req->base.complete(&dev->req->base, err);
}

static void s5p_unset_outdata(struct s5p_aes_dev *dev)
{
	dma_unmap_sg(dev->dev, dev->sg_dst, 1, DMA_FROM_DEVICE);
}

static void s5p_unset_indata(struct s5p_aes_dev *dev)
{
	dma_unmap_sg(dev->dev, dev->sg_src, 1, DMA_TO_DEVICE);
}

static int s5p_make_sg_cpy(struct s5p_aes_dev *dev, struct scatterlist *src,
			    struct scatterlist **dst)
{
	void *pages;
	int len;

	*dst = kmalloc(sizeof(**dst), GFP_ATOMIC);
	if (!*dst)
		return -ENOMEM;

	len = ALIGN(dev->req->nbytes, AES_BLOCK_SIZE);
	pages = (void *)__get_free_pages(GFP_ATOMIC, get_order(len));
	if (!pages) {
		kfree(*dst);
		*dst = NULL;
		return -ENOMEM;
	}

	s5p_sg_copy_buf(pages, src, dev->req->nbytes, 0);

	sg_init_table(*dst, 1);
	sg_set_buf(*dst, pages, len);

	return 0;
}

static int s5p_set_outdata(struct s5p_aes_dev *dev, struct scatterlist *sg)
{
	int err;

	if (!sg->length) {
		err = -EINVAL;
		goto exit;
	}

	err = dma_map_sg(dev->dev, sg, 1, DMA_FROM_DEVICE);
	if (!err) {
		err = -ENOMEM;
		goto exit;
	}

	dev->sg_dst = sg;
	err = 0;

exit:
	return err;
}

static int s5p_set_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
{
	int err;

	if (!sg->length) {
		err = -EINVAL;
		goto exit;
	}

	err = dma_map_sg(dev->dev, sg, 1, DMA_TO_DEVICE);
	if (!err) {
		err = -ENOMEM;
		goto exit;
	}

	dev->sg_src = sg;
	err = 0;

exit:
	return err;
}

/*
 * Returns -ERRNO on error (mapping of new data failed).
 * On success returns:
 *  - 0 if there is no more data,
 *  - 1 if new transmitting (output) data is ready and its address+length
 *     have to be written to device (by calling s5p_set_dma_outdata()).
 */
static int s5p_aes_tx(struct s5p_aes_dev *dev)
{
	int ret = 0;

	s5p_unset_outdata(dev);

	if (!sg_is_last(dev->sg_dst)) {
		ret = s5p_set_outdata(dev, sg_next(dev->sg_dst));
		if (!ret)
			ret = 1;
	}

	return ret;
}

/*
 * Returns -ERRNO on error (mapping of new data failed).
 * On success returns:
 *  - 0 if there is no more data,
 *  - 1 if new receiving (input) data is ready and its address+length
 *     have to be written to device (by calling s5p_set_dma_indata()).
 */
static int s5p_aes_rx(struct s5p_aes_dev *dev/*, bool *set_dma*/)
{
	int ret = 0;

	s5p_unset_indata(dev);

	if (!sg_is_last(dev->sg_src)) {
		ret = s5p_set_indata(dev, sg_next(dev->sg_src));
		if (!ret)
			ret = 1;
	}

	return ret;
}

static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
{
	struct platform_device *pdev = dev_id;
	struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
	int err_dma_tx = 0;
	int err_dma_rx = 0;
	bool tx_end = false;
	unsigned long flags;
	uint32_t status;
	int err;

	spin_lock_irqsave(&dev->lock, flags);

	/*
	 * Handle rx or tx interrupt. If there is still data (scatterlist did not
	 * reach end), then map next scatterlist entry.
	 * In case of such mapping error, s5p_aes_complete() should be called.
	 *
	 * If there is no more data in tx scatter list, call s5p_aes_complete()
	 * and schedule new tasklet.
	 */
	status = SSS_READ(dev, FCINTSTAT);
	if (status & SSS_FCINTSTAT_BRDMAINT)
		err_dma_rx = s5p_aes_rx(dev);

	if (status & SSS_FCINTSTAT_BTDMAINT) {
		if (sg_is_last(dev->sg_dst))
			tx_end = true;
		err_dma_tx = s5p_aes_tx(dev);
	}

	SSS_WRITE(dev, FCINTPEND, status);

	if (err_dma_rx < 0) {
		err = err_dma_rx;
		goto error;
	}
	if (err_dma_tx < 0) {
		err = err_dma_tx;
		goto error;
	}

	if (tx_end) {
		s5p_sg_done(dev);

		spin_unlock_irqrestore(&dev->lock, flags);

		s5p_aes_complete(dev, 0);
		/* Device is still busy */
		tasklet_schedule(&dev->tasklet);
	} else {
		/*
		 * Writing length of DMA block (either receiving or
		 * transmitting) will start the operation immediately, so this
		 * should be done at the end (even after clearing pending
		 * interrupts to not miss the interrupt).
		 */
		if (err_dma_tx == 1)
			s5p_set_dma_outdata(dev, dev->sg_dst);
		if (err_dma_rx == 1)
			s5p_set_dma_indata(dev, dev->sg_src);

		spin_unlock_irqrestore(&dev->lock, flags);
	}

	return IRQ_HANDLED;

error:
	s5p_sg_done(dev);
	dev->busy = false;
	spin_unlock_irqrestore(&dev->lock, flags);
	s5p_aes_complete(dev, err);

	return IRQ_HANDLED;
}

static void s5p_set_aes(struct s5p_aes_dev *dev,
			uint8_t *key, uint8_t *iv, unsigned int keylen)
{
	void __iomem *keystart;

	if (iv)
		memcpy_toio(dev->aes_ioaddr + SSS_REG_AES_IV_DATA(0), iv, 0x10);

	if (keylen == AES_KEYSIZE_256)
		keystart = dev->aes_ioaddr + SSS_REG_AES_KEY_DATA(0);
	else if (keylen == AES_KEYSIZE_192)
		keystart = dev->aes_ioaddr + SSS_REG_AES_KEY_DATA(2);
	else
		keystart = dev->aes_ioaddr + SSS_REG_AES_KEY_DATA(4);

	memcpy_toio(keystart, key, keylen);
}

static bool s5p_is_sg_aligned(struct scatterlist *sg)
{
	while (sg) {
		if (!IS_ALIGNED(sg->length, AES_BLOCK_SIZE))
			return false;
		sg = sg_next(sg);
	}

	return true;
}

static int s5p_set_indata_start(struct s5p_aes_dev *dev,
				struct ablkcipher_request *req)
{
	struct scatterlist *sg;
	int err;

	dev->sg_src_cpy = NULL;
	sg = req->src;
	if (!s5p_is_sg_aligned(sg)) {
		dev_dbg(dev->dev,
			"At least one unaligned source scatter list, making a copy\n");
		err = s5p_make_sg_cpy(dev, sg, &dev->sg_src_cpy);
		if (err)
			return err;

		sg = dev->sg_src_cpy;
	}

	err = s5p_set_indata(dev, sg);
	if (err) {
		s5p_free_sg_cpy(dev, &dev->sg_src_cpy);
		return err;
	}

	return 0;
}

static int s5p_set_outdata_start(struct s5p_aes_dev *dev,
				struct ablkcipher_request *req)
{
	struct scatterlist *sg;
	int err;

	dev->sg_dst_cpy = NULL;
	sg = req->dst;
	if (!s5p_is_sg_aligned(sg)) {
		dev_dbg(dev->dev,
			"At least one unaligned dest scatter list, making a copy\n");
		err = s5p_make_sg_cpy(dev, sg, &dev->sg_dst_cpy);
		if (err)
			return err;

		sg = dev->sg_dst_cpy;
	}

	err = s5p_set_outdata(dev, sg);
	if (err) {
		s5p_free_sg_cpy(dev, &dev->sg_dst_cpy);
		return err;
	}

	return 0;
}

static void s5p_aes_crypt_start(struct s5p_aes_dev *dev, unsigned long mode)
{
	struct ablkcipher_request *req = dev->req;
	uint32_t aes_control;
	unsigned long flags;
	int err;

	aes_control = SSS_AES_KEY_CHANGE_MODE;
	if (mode & FLAGS_AES_DECRYPT)
		aes_control |= SSS_AES_MODE_DECRYPT;

	if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CBC)
		aes_control |= SSS_AES_CHAIN_MODE_CBC;
	else if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CTR)
		aes_control |= SSS_AES_CHAIN_MODE_CTR;

	if (dev->ctx->keylen == AES_KEYSIZE_192)
		aes_control |= SSS_AES_KEY_SIZE_192;
	else if (dev->ctx->keylen == AES_KEYSIZE_256)
		aes_control |= SSS_AES_KEY_SIZE_256;

	aes_control |= SSS_AES_FIFO_MODE;

	/* as a variant it is possible to use byte swapping on DMA side */
	aes_control |= SSS_AES_BYTESWAP_DI
		    |  SSS_AES_BYTESWAP_DO
		    |  SSS_AES_BYTESWAP_IV
		    |  SSS_AES_BYTESWAP_KEY
		    |  SSS_AES_BYTESWAP_CNT;

	spin_lock_irqsave(&dev->lock, flags);

	SSS_WRITE(dev, FCINTENCLR,
		  SSS_FCINTENCLR_BTDMAINTENCLR | SSS_FCINTENCLR_BRDMAINTENCLR);
	SSS_WRITE(dev, FCFIFOCTRL, 0x00);

	err = s5p_set_indata_start(dev, req);
	if (err)
		goto indata_error;

	err = s5p_set_outdata_start(dev, req);
	if (err)
		goto outdata_error;

	SSS_AES_WRITE(dev, AES_CONTROL, aes_control);
	s5p_set_aes(dev, dev->ctx->aes_key, req->info, dev->ctx->keylen);

	s5p_set_dma_indata(dev,  dev->sg_src);
	s5p_set_dma_outdata(dev, dev->sg_dst);

	SSS_WRITE(dev, FCINTENSET,
		  SSS_FCINTENSET_BTDMAINTENSET | SSS_FCINTENSET_BRDMAINTENSET);

	spin_unlock_irqrestore(&dev->lock, flags);

	return;

outdata_error:
	s5p_unset_indata(dev);

indata_error:
	s5p_sg_done(dev);
	dev->busy = false;
	spin_unlock_irqrestore(&dev->lock, flags);
	s5p_aes_complete(dev, err);
}

static void s5p_tasklet_cb(unsigned long data)
{
	struct s5p_aes_dev *dev = (struct s5p_aes_dev *)data;
	struct crypto_async_request *async_req, *backlog;
	struct s5p_aes_reqctx *reqctx;
	unsigned long flags;

	spin_lock_irqsave(&dev->lock, flags);
	backlog   = crypto_get_backlog(&dev->queue);
	async_req = crypto_dequeue_request(&dev->queue);

	if (!async_req) {
		dev->busy = false;
		spin_unlock_irqrestore(&dev->lock, flags);
		return;
	}
	spin_unlock_irqrestore(&dev->lock, flags);

	if (backlog)
		backlog->complete(backlog, -EINPROGRESS);

	dev->req = ablkcipher_request_cast(async_req);
	dev->ctx = crypto_tfm_ctx(dev->req->base.tfm);
	reqctx   = ablkcipher_request_ctx(dev->req);

	s5p_aes_crypt_start(dev, reqctx->mode);
}

static int s5p_aes_handle_req(struct s5p_aes_dev *dev,
			      struct ablkcipher_request *req)
{
	unsigned long flags;
	int err;

	spin_lock_irqsave(&dev->lock, flags);
	err = ablkcipher_enqueue_request(&dev->queue, req);
	if (dev->busy) {
		spin_unlock_irqrestore(&dev->lock, flags);
		goto exit;
	}
	dev->busy = true;

	spin_unlock_irqrestore(&dev->lock, flags);

	tasklet_schedule(&dev->tasklet);

exit:
	return err;
}

static int s5p_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
{
	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
	struct s5p_aes_reqctx *reqctx = ablkcipher_request_ctx(req);
	struct s5p_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
	struct s5p_aes_dev *dev = ctx->dev;

	if (!IS_ALIGNED(req->nbytes, AES_BLOCK_SIZE)) {
		dev_err(dev->dev, "request size is not exact amount of AES blocks\n");
		return -EINVAL;
	}

	reqctx->mode = mode;

	return s5p_aes_handle_req(dev, req);
}

static int s5p_aes_setkey(struct crypto_ablkcipher *cipher,
			  const uint8_t *key, unsigned int keylen)
{
	struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
	struct s5p_aes_ctx *ctx = crypto_tfm_ctx(tfm);

	if (keylen != AES_KEYSIZE_128 &&
	    keylen != AES_KEYSIZE_192 &&
	    keylen != AES_KEYSIZE_256)
		return -EINVAL;

	memcpy(ctx->aes_key, key, keylen);
	ctx->keylen = keylen;

	return 0;
}

static int s5p_aes_ecb_encrypt(struct ablkcipher_request *req)
{
	return s5p_aes_crypt(req, 0);
}

static int s5p_aes_ecb_decrypt(struct ablkcipher_request *req)
{
	return s5p_aes_crypt(req, FLAGS_AES_DECRYPT);
}

static int s5p_aes_cbc_encrypt(struct ablkcipher_request *req)
{
	return s5p_aes_crypt(req, FLAGS_AES_CBC);
}

static int s5p_aes_cbc_decrypt(struct ablkcipher_request *req)
{
	return s5p_aes_crypt(req, FLAGS_AES_DECRYPT | FLAGS_AES_CBC);
}

static int s5p_aes_cra_init(struct crypto_tfm *tfm)
{
	struct s5p_aes_ctx *ctx = crypto_tfm_ctx(tfm);

	ctx->dev = s5p_dev;
	tfm->crt_ablkcipher.reqsize = sizeof(struct s5p_aes_reqctx);

	return 0;
}

static struct crypto_alg algs[] = {
	{
		.cra_name		= "ecb(aes)",
		.cra_driver_name	= "ecb-aes-s5p",
		.cra_priority		= 100,
		.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER |
					  CRYPTO_ALG_ASYNC |
					  CRYPTO_ALG_KERN_DRIVER_ONLY,
		.cra_blocksize		= AES_BLOCK_SIZE,
		.cra_ctxsize		= sizeof(struct s5p_aes_ctx),
		.cra_alignmask		= 0x0f,
		.cra_type		= &crypto_ablkcipher_type,
		.cra_module		= THIS_MODULE,
		.cra_init		= s5p_aes_cra_init,
		.cra_u.ablkcipher = {
			.min_keysize	= AES_MIN_KEY_SIZE,
			.max_keysize	= AES_MAX_KEY_SIZE,
			.setkey		= s5p_aes_setkey,
			.encrypt	= s5p_aes_ecb_encrypt,
			.decrypt	= s5p_aes_ecb_decrypt,
		}
	},
	{
		.cra_name		= "cbc(aes)",
		.cra_driver_name	= "cbc-aes-s5p",
		.cra_priority		= 100,
		.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER |
					  CRYPTO_ALG_ASYNC |
					  CRYPTO_ALG_KERN_DRIVER_ONLY,
		.cra_blocksize		= AES_BLOCK_SIZE,
		.cra_ctxsize		= sizeof(struct s5p_aes_ctx),
		.cra_alignmask		= 0x0f,
		.cra_type		= &crypto_ablkcipher_type,
		.cra_module		= THIS_MODULE,
		.cra_init		= s5p_aes_cra_init,
		.cra_u.ablkcipher = {
			.min_keysize	= AES_MIN_KEY_SIZE,
			.max_keysize	= AES_MAX_KEY_SIZE,
			.ivsize		= AES_BLOCK_SIZE,
			.setkey		= s5p_aes_setkey,
			.encrypt	= s5p_aes_cbc_encrypt,
			.decrypt	= s5p_aes_cbc_decrypt,
		}
	},
};

static int s5p_aes_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	int i, j, err = -ENODEV;
	struct samsung_aes_variant *variant;
	struct s5p_aes_dev *pdata;
	struct resource *res;

	if (s5p_dev)
		return -EEXIST;

	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(pdata->ioaddr))
		return PTR_ERR(pdata->ioaddr);

	variant = find_s5p_sss_version(pdev);

	pdata->clk = devm_clk_get(dev, "secss");
	if (IS_ERR(pdata->clk)) {
		dev_err(dev, "failed to find secss clock source\n");
		return -ENOENT;
	}

	err = clk_prepare_enable(pdata->clk);
	if (err < 0) {
		dev_err(dev, "Enabling SSS clk failed, err %d\n", err);
		return err;
	}

	spin_lock_init(&pdata->lock);

	pdata->aes_ioaddr = pdata->ioaddr + variant->aes_offset;

	pdata->irq_fc = platform_get_irq(pdev, 0);
	if (pdata->irq_fc < 0) {
		err = pdata->irq_fc;
		dev_warn(dev, "feed control interrupt is not available.\n");
		goto err_irq;
	}
	err = devm_request_threaded_irq(dev, pdata->irq_fc, NULL,
					s5p_aes_interrupt, IRQF_ONESHOT,
					pdev->name, pdev);
	if (err < 0) {
		dev_warn(dev, "feed control interrupt is not available.\n");
		goto err_irq;
	}

	pdata->busy = false;
	pdata->dev = dev;
	platform_set_drvdata(pdev, pdata);
	s5p_dev = pdata;

	tasklet_init(&pdata->tasklet, s5p_tasklet_cb, (unsigned long)pdata);
	crypto_init_queue(&pdata->queue, CRYPTO_QUEUE_LEN);

	for (i = 0; i < ARRAY_SIZE(algs); i++) {
		err = crypto_register_alg(&algs[i]);
		if (err)
			goto err_algs;
	}

	dev_info(dev, "s5p-sss driver registered\n");

	return 0;

err_algs:
	dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name, err);

	for (j = 0; j < i; j++)
		crypto_unregister_alg(&algs[j]);

	tasklet_kill(&pdata->tasklet);

err_irq:
	clk_disable_unprepare(pdata->clk);

	s5p_dev = NULL;

	return err;
}

static int s5p_aes_remove(struct platform_device *pdev)
{
	struct s5p_aes_dev *pdata = platform_get_drvdata(pdev);
	int i;

	if (!pdata)
		return -ENODEV;

	for (i = 0; i < ARRAY_SIZE(algs); i++)
		crypto_unregister_alg(&algs[i]);

	tasklet_kill(&pdata->tasklet);

	clk_disable_unprepare(pdata->clk);

	s5p_dev = NULL;

	return 0;
}

static struct platform_driver s5p_aes_crypto = {
	.probe	= s5p_aes_probe,
	.remove	= s5p_aes_remove,
	.driver	= {
		.name	= "s5p-secss",
		.of_match_table = s5p_sss_dt_match,
	},
};

module_platform_driver(s5p_aes_crypto);

MODULE_DESCRIPTION("S5PV210 AES hw acceleration support.");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Vladimir Zapolskiy <vzapolskiy@gmail.com>");