blob: fff7a865d72120bac788e705c657b40f3be226e9 [file] [log] [blame]
* Intel MIC Platform Software Stack (MPSS)
* Copyright(c) 2016 Intel Corporation.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* General Public License for more details.
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
* Intel Virtio over PCIe Bus driver.
#ifndef _VOP_BUS_H_
#define _VOP_BUS_H_
* Everything a vop driver needs to work with any particular vop
* implementation.
#include <linux/dmaengine.h>
#include <linux/interrupt.h>
#include "../common/mic_dev.h"
struct vop_device_id {
u32 device;
u32 vendor;
#define VOP_DEV_TRNSP 1
#define VOP_DEV_ANY_ID 0xffffffff
* Size of the internal buffer used during DMA's as an intermediate buffer
* for copy to/from user. Must be an integral number of pages.
* vop_device - representation of a device using vop
* @hw_ops: the hardware ops supported by this device.
* @id: the device type identification (used to match it with a driver).
* @dev: underlying device.
* @dnode - The destination node which this device will communicate with.
* @aper: Aperture memory window
* @dma_ch - DMA channel
* @index: unique position on the vop bus
struct vop_device {
struct vop_hw_ops *hw_ops;
struct vop_device_id id;
struct device dev;
u8 dnode;
struct mic_mw *aper;
struct dma_chan *dma_ch;
int index;
* vop_driver - operations for a vop I/O driver
* @driver: underlying device driver (populate name and owner).
* @id_table: the ids serviced by this driver.
* @probe: the function to call when a device is found. Returns 0 or -errno.
* @remove: the function to call when a device is removed.
struct vop_driver {
struct device_driver driver;
const struct vop_device_id *id_table;
int (*probe)(struct vop_device *dev);
void (*remove)(struct vop_device *dev);
* vop_hw_ops - Hardware operations for accessing a VOP device on the VOP bus.
* @next_db: Obtain the next available doorbell.
* @request_irq: Request an interrupt on a particular doorbell.
* @free_irq: Free an interrupt requested previously.
* @ack_interrupt: acknowledge an interrupt in the ISR.
* @get_remote_dp: Get access to the virtio device page used by the remote
* node to add/remove/configure virtio devices.
* @get_dp: Get access to the virtio device page used by the self
* node to add/remove/configure virtio devices.
* @send_intr: Send an interrupt to the peer node on a specified doorbell.
* @ioremap: Map a buffer with the specified DMA address and length.
* @iounmap: Unmap a buffer previously mapped.
* @dma_filter: The DMA filter function to use for obtaining access to
* a DMA channel on the peer node.
struct vop_hw_ops {
int (*next_db)(struct vop_device *vpdev);
struct mic_irq *(*request_irq)(struct vop_device *vpdev,
irqreturn_t (*func)(int irq, void *data),
const char *name, void *data,
int intr_src);
void (*free_irq)(struct vop_device *vpdev,
struct mic_irq *cookie, void *data);
void (*ack_interrupt)(struct vop_device *vpdev, int num);
void __iomem * (*get_remote_dp)(struct vop_device *vpdev);
void * (*get_dp)(struct vop_device *vpdev);
void (*send_intr)(struct vop_device *vpdev, int db);
void __iomem * (*ioremap)(struct vop_device *vpdev,
dma_addr_t pa, size_t len);
void (*iounmap)(struct vop_device *vpdev, void __iomem *va);
struct vop_device *
vop_register_device(struct device *pdev, int id,
const struct dma_map_ops *dma_ops,
struct vop_hw_ops *hw_ops, u8 dnode, struct mic_mw *aper,
struct dma_chan *chan);
void vop_unregister_device(struct vop_device *dev);
int vop_register_driver(struct vop_driver *drv);
void vop_unregister_driver(struct vop_driver *drv);
* module_vop_driver() - Helper macro for drivers that don't do
* anything special in module init/exit. This eliminates a lot of
* boilerplate. Each module may only use this macro once, and
* calling it replaces module_init() and module_exit()
#define module_vop_driver(__vop_driver) \
module_driver(__vop_driver, vop_register_driver, \
static inline struct vop_device *dev_to_vop(struct device *dev)
return container_of(dev, struct vop_device, dev);
static inline struct vop_driver *drv_to_vop(struct device_driver *drv)
return container_of(drv, struct vop_driver, driver);
#endif /* _VOP_BUS_H */