diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
new file mode 100644
index 0000000..d3015df
--- /dev/null
+++ b/drivers/mfd/wm831x-irq.c
@@ -0,0 +1,559 @@
+/*
+ * wm831x-irq.c  --  Interrupt controller support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+
+#include <linux/delay.h>
+
+/*
+ * Since generic IRQs don't currently support interrupt controllers on
+ * interrupt driven buses we don't use genirq but instead provide an
+ * interface that looks very much like the standard ones.  This leads
+ * to some bodges, including storing interrupt handler information in
+ * the static irq_data table we use to look up the data for individual
+ * interrupts, but hopefully won't last too long.
+ */
+
+struct wm831x_irq_data {
+	int primary;
+	int reg;
+	int mask;
+	irq_handler_t handler;
+	void *handler_data;
+};
+
+static struct wm831x_irq_data wm831x_irqs[] = {
+	[WM831X_IRQ_TEMP_THW] = {
+		.primary = WM831X_TEMP_INT,
+		.reg = 1,
+		.mask = WM831X_TEMP_THW_EINT,
+	},
+	[WM831X_IRQ_GPIO_1] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP1_EINT,
+	},
+	[WM831X_IRQ_GPIO_2] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP2_EINT,
+	},
+	[WM831X_IRQ_GPIO_3] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP3_EINT,
+	},
+	[WM831X_IRQ_GPIO_4] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP4_EINT,
+	},
+	[WM831X_IRQ_GPIO_5] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP5_EINT,
+	},
+	[WM831X_IRQ_GPIO_6] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP6_EINT,
+	},
+	[WM831X_IRQ_GPIO_7] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP7_EINT,
+	},
+	[WM831X_IRQ_GPIO_8] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP8_EINT,
+	},
+	[WM831X_IRQ_GPIO_9] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP9_EINT,
+	},
+	[WM831X_IRQ_GPIO_10] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP10_EINT,
+	},
+	[WM831X_IRQ_GPIO_11] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP11_EINT,
+	},
+	[WM831X_IRQ_GPIO_12] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP12_EINT,
+	},
+	[WM831X_IRQ_GPIO_13] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP13_EINT,
+	},
+	[WM831X_IRQ_GPIO_14] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP14_EINT,
+	},
+	[WM831X_IRQ_GPIO_15] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP15_EINT,
+	},
+	[WM831X_IRQ_GPIO_16] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP16_EINT,
+	},
+	[WM831X_IRQ_ON] = {
+		.primary = WM831X_ON_PIN_INT,
+		.reg = 1,
+		.mask = WM831X_ON_PIN_EINT,
+	},
+	[WM831X_IRQ_PPM_SYSLO] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_SYSLO_EINT,
+	},
+	[WM831X_IRQ_PPM_PWR_SRC] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_PWR_SRC_EINT,
+	},
+	[WM831X_IRQ_PPM_USB_CURR] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_USB_CURR_EINT,
+	},
+	[WM831X_IRQ_WDOG_TO] = {
+		.primary = WM831X_WDOG_INT,
+		.reg = 1,
+		.mask = WM831X_WDOG_TO_EINT,
+	},
+	[WM831X_IRQ_RTC_PER] = {
+		.primary = WM831X_RTC_INT,
+		.reg = 1,
+		.mask = WM831X_RTC_PER_EINT,
+	},
+	[WM831X_IRQ_RTC_ALM] = {
+		.primary = WM831X_RTC_INT,
+		.reg = 1,
+		.mask = WM831X_RTC_ALM_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_HOT] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_HOT_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_COLD] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_COLD_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_FAIL] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_FAIL_EINT,
+	},
+	[WM831X_IRQ_CHG_OV] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_OV_EINT,
+	},
+	[WM831X_IRQ_CHG_END] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_END_EINT,
+	},
+	[WM831X_IRQ_CHG_TO] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_TO_EINT,
+	},
+	[WM831X_IRQ_CHG_MODE] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_MODE_EINT,
+	},
+	[WM831X_IRQ_CHG_START] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_START_EINT,
+	},
+	[WM831X_IRQ_TCHDATA] = {
+		.primary = WM831X_TCHDATA_INT,
+		.reg = 1,
+		.mask = WM831X_TCHDATA_EINT,
+	},
+	[WM831X_IRQ_TCHPD] = {
+		.primary = WM831X_TCHPD_INT,
+		.reg = 1,
+		.mask = WM831X_TCHPD_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DATA] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DATA_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP1] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP1_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP2] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP2_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP3] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP3_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP4] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP4_EINT,
+	},
+	[WM831X_IRQ_CS1] = {
+		.primary = WM831X_CS_INT,
+		.reg = 2,
+		.mask = WM831X_CS1_EINT,
+	},
+	[WM831X_IRQ_CS2] = {
+		.primary = WM831X_CS_INT,
+		.reg = 2,
+		.mask = WM831X_CS2_EINT,
+	},
+	[WM831X_IRQ_HC_DC1] = {
+		.primary = WM831X_HC_INT,
+		.reg = 4,
+		.mask = WM831X_HC_DC1_EINT,
+	},
+	[WM831X_IRQ_HC_DC2] = {
+		.primary = WM831X_HC_INT,
+		.reg = 4,
+		.mask = WM831X_HC_DC2_EINT,
+	},
+	[WM831X_IRQ_UV_LDO1] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO1_EINT,
+	},
+	[WM831X_IRQ_UV_LDO2] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO2_EINT,
+	},
+	[WM831X_IRQ_UV_LDO3] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO3_EINT,
+	},
+	[WM831X_IRQ_UV_LDO4] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO4_EINT,
+	},
+	[WM831X_IRQ_UV_LDO5] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO5_EINT,
+	},
+	[WM831X_IRQ_UV_LDO6] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO6_EINT,
+	},
+	[WM831X_IRQ_UV_LDO7] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO7_EINT,
+	},
+	[WM831X_IRQ_UV_LDO8] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO8_EINT,
+	},
+	[WM831X_IRQ_UV_LDO9] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO9_EINT,
+	},
+	[WM831X_IRQ_UV_LDO10] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO10_EINT,
+	},
+	[WM831X_IRQ_UV_DC1] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC1_EINT,
+	},
+	[WM831X_IRQ_UV_DC2] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC2_EINT,
+	},
+	[WM831X_IRQ_UV_DC3] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC3_EINT,
+	},
+	[WM831X_IRQ_UV_DC4] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC4_EINT,
+	},
+};
+
+static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
+{
+	return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
+}
+
+static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
+{
+	return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
+}
+
+static void __wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask;
+	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+			 wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+	mutex_lock(&wm831x->irq_lock);
+	__wm831x_enable_irq(wm831x, irq);
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_enable_irq);
+
+static void __wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask;
+	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+			 wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+	mutex_lock(&wm831x->irq_lock);
+	__wm831x_disable_irq(wm831x, irq);
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_disable_irq);
+
+int wm831x_request_irq(struct wm831x *wm831x,
+		       unsigned int irq, irq_handler_t handler,
+		       unsigned long flags, const char *name,
+		       void *dev)
+{
+	int ret = 0;
+
+	if (irq < 0 || irq >= WM831X_NUM_IRQS)
+		return -EINVAL;
+
+	mutex_lock(&wm831x->irq_lock);
+
+	if (wm831x_irqs[irq].handler) {
+		dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	wm831x_irqs[irq].handler = handler;
+	wm831x_irqs[irq].handler_data = dev;
+
+	__wm831x_enable_irq(wm831x, irq);
+
+out:
+	mutex_unlock(&wm831x->irq_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_request_irq);
+
+void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data)
+{
+	if (irq < 0 || irq >= WM831X_NUM_IRQS)
+		return;
+
+	mutex_lock(&wm831x->irq_lock);
+
+	wm831x_irqs[irq].handler = NULL;
+	wm831x_irqs[irq].handler_data = NULL;
+
+	__wm831x_disable_irq(wm831x, irq);
+
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_free_irq);
+
+
+static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	if (irq_data->handler) {
+		irq_data->handler(irq, irq_data->handler_data);
+		wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data),
+				 irq_data->mask);
+	} else {
+		dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq);
+		__wm831x_disable_irq(wm831x, irq);
+	}
+}
+
+/* Main interrupt handling occurs in a workqueue since we need
+ * interrupts enabled to interact with the chip. */
+static void wm831x_irq_worker(struct work_struct *work)
+{
+	struct wm831x *wm831x = container_of(work, struct wm831x, irq_work);
+	unsigned int i;
+	int primary;
+	int status_regs[5];
+	int read[5] = { 0 };
+	int *status;
+
+	primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
+	if (primary < 0) {
+		dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
+			primary);
+		goto out;
+	}
+
+	mutex_lock(&wm831x->irq_lock);
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
+		int offset = wm831x_irqs[i].reg - 1;
+
+		if (!(primary & wm831x_irqs[i].primary))
+			continue;
+
+		status = &status_regs[offset];
+
+		/* Hopefully there should only be one register to read
+		 * each time otherwise we ought to do a block read. */
+		if (!read[offset]) {
+			*status = wm831x_reg_read(wm831x,
+				     irq_data_to_status_reg(&wm831x_irqs[i]));
+			if (*status < 0) {
+				dev_err(wm831x->dev,
+					"Failed to read IRQ status: %d\n",
+					*status);
+				goto out_lock;
+			}
+
+			/* Mask out the disabled IRQs */
+			*status &= ~wm831x->irq_masks[offset];
+			read[offset] = 1;
+		}
+
+		if (*status & wm831x_irqs[i].mask)
+			wm831x_handle_irq(wm831x, i, *status);
+	}
+
+out_lock:
+	mutex_unlock(&wm831x->irq_lock);
+out:
+	enable_irq(wm831x->irq);
+}
+
+
+static irqreturn_t wm831x_cpu_irq(int irq, void *data)
+{
+	struct wm831x *wm831x = data;
+
+	/* Shut the interrupt to the CPU up and schedule the actual
+	 * handler; we can't check that the IRQ is asserted. */
+	disable_irq_nosync(irq);
+
+	queue_work(wm831x->irq_wq, &wm831x->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+int wm831x_irq_init(struct wm831x *wm831x, int irq)
+{
+	int i, ret;
+
+	if (!irq) {
+		dev_warn(wm831x->dev,
+			 "No interrupt specified - functionality limited\n");
+		return 0;
+	}
+
+
+	wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq");
+	if (!wm831x->irq_wq) {
+		dev_err(wm831x->dev, "Failed to allocate IRQ worker\n");
+		return -ESRCH;
+	}
+
+	wm831x->irq = irq;
+	mutex_init(&wm831x->irq_lock);
+	INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
+
+	/* Mask the individual interrupt sources */
+	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) {
+		wm831x->irq_masks[i] = 0xffff;
+		wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
+				 0xffff);
+	}
+
+	/* Enable top level interrupts, we mask at secondary level */
+	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
+
+	/* We're good to go.  We set IRQF_SHARED since there's a
+	 * chance the driver will interoperate with another driver but
+	 * the need to disable the IRQ while handing via I2C/SPI means
+	 * that this may break and performance will be impacted.  If
+	 * this does happen it's a hardware design issue and the only
+	 * other alternative would be polling.
+	 */
+	ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED,
+			  "wm831x", wm831x);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
+			irq, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void wm831x_irq_exit(struct wm831x *wm831x)
+{
+	if (wm831x->irq)
+		free_irq(wm831x->irq, wm831x);
+}