diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
index 4ccdbca..1dcdd49 100644
--- a/Documentation/networking/ipvs-sysctl.txt
+++ b/Documentation/networking/ipvs-sysctl.txt
@@ -15,6 +15,23 @@
         enabled and the variable is automatically set to 2, otherwise
         the strategy is disabled and the variable is  set  to 1.
 
+conntrack - BOOLEAN
+	0 - disabled (default)
+	not 0 - enabled
+
+	If set, maintain connection tracking entries for
+	connections handled by IPVS.
+
+	This should be enabled if connections handled by IPVS are to be
+	also handled by stateful firewall rules. That is, iptables rules
+	that make use of connection tracking.  It is a performance
+	optimisation to disable this setting otherwise.
+
+	Connections handled by the IPVS FTP application module
+	will have connection tracking entries regardless of this setting.
+
+	Only available when IPVS is compiled with the CONFIG_IP_VS_NFCT
+
 cache_bypass - BOOLEAN
         0 - disabled (default)
         not 0 - enabled
@@ -39,7 +56,7 @@
 	11         - IPVS packet handling (ip_vs_in/ip_vs_out)
 	12 or more - packet traversal
 
-	Only available when IPVS is compiled with the CONFIG_IPVS_DEBUG
+	Only available when IPVS is compiled with the CONFIG_IP_VS_DEBUG
 
 	Higher debugging levels include the messages for lower debugging
 	levels, so setting debug level 2, includes level 0, 1 and 2
@@ -141,3 +158,36 @@
         synchronized, every time the number of its incoming packets
         modulus 50 equals the threshold. The range of the threshold is
         from 0 to 49.
+
+snat_reroute - BOOLEAN
+	0 - disabled
+	not 0 - enabled (default)
+
+	If enabled, recalculate the route of SNATed packets from
+	realservers so that they are routed as if they originate from the
+	director. Otherwise they are routed as if they are forwarded by the
+	director.
+
+	If policy routing is in effect then it is possible that the route
+	of a packet originating from a director is routed differently to a
+	packet being forwarded by the director.
+
+	If policy routing is not in effect then the recalculated route will
+	always be the same as the original route so it is an optimisation
+	to disable snat_reroute and avoid the recalculation.
+
+sync_version - INTEGER
+	default 1
+
+	The version of the synchronisation protocol used when sending
+	synchronisation messages.
+
+	0 selects the original synchronisation protocol (version 0). This
+	should be used when sending synchronisation messages to a legacy
+	system that only understands the original synchronisation protocol.
+
+	1 selects the current synchronisation protocol (version 1). This
+	should be used where possible.
+
+	Kernels with this sync_version entry are able to receive messages
+	of both version 1 and version 2 of the synchronisation protocol.