/*
 *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
 *                   Creative Labs, Inc.
 *  Routines for control of EMU10K1 chips
 *
 *  Copyright (c) by James Courtier-Dutton <James@superbug.co.uk>
 *      Added support for Audigy 2 Value.
 *  	Added EMU 1010 support.
 *  	General bug fixes and enhancements.
 *
 *
 *  BUGS:
 *    --
 *
 *  TODO:
 *    --
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   You should have received a copy of the GNU General Public License
 *   along with this program; if not, write to the Free Software
 *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 *
 */

#include <sound/driver.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>


#include <sound/core.h>
#include <sound/emu10k1.h>
#include <linux/firmware.h>
#include "p16v.h"
#include "tina2.h"
#include "p17v.h"


#define HANA_FILENAME "emu/hana.fw"
#define DOCK_FILENAME "emu/audio_dock.fw"

MODULE_FIRMWARE(HANA_FILENAME);
MODULE_FIRMWARE(DOCK_FILENAME);


/*************************************************************************
 * EMU10K1 init / done
 *************************************************************************/

void snd_emu10k1_voice_init(struct snd_emu10k1 * emu, int ch)
{
	snd_emu10k1_ptr_write(emu, DCYSUSV, ch, 0);
	snd_emu10k1_ptr_write(emu, IP, ch, 0);
	snd_emu10k1_ptr_write(emu, VTFT, ch, 0xffff);
	snd_emu10k1_ptr_write(emu, CVCF, ch, 0xffff);
	snd_emu10k1_ptr_write(emu, PTRX, ch, 0);
	snd_emu10k1_ptr_write(emu, CPF, ch, 0);
	snd_emu10k1_ptr_write(emu, CCR, ch, 0);

	snd_emu10k1_ptr_write(emu, PSST, ch, 0);
	snd_emu10k1_ptr_write(emu, DSL, ch, 0x10);
	snd_emu10k1_ptr_write(emu, CCCA, ch, 0);
	snd_emu10k1_ptr_write(emu, Z1, ch, 0);
	snd_emu10k1_ptr_write(emu, Z2, ch, 0);
	snd_emu10k1_ptr_write(emu, FXRT, ch, 0x32100000);

	snd_emu10k1_ptr_write(emu, ATKHLDM, ch, 0);
	snd_emu10k1_ptr_write(emu, DCYSUSM, ch, 0);
	snd_emu10k1_ptr_write(emu, IFATN, ch, 0xffff);
	snd_emu10k1_ptr_write(emu, PEFE, ch, 0);
	snd_emu10k1_ptr_write(emu, FMMOD, ch, 0);
	snd_emu10k1_ptr_write(emu, TREMFRQ, ch, 24);	/* 1 Hz */
	snd_emu10k1_ptr_write(emu, FM2FRQ2, ch, 24);	/* 1 Hz */
	snd_emu10k1_ptr_write(emu, TEMPENV, ch, 0);

	/*** these are last so OFF prevents writing ***/
	snd_emu10k1_ptr_write(emu, LFOVAL2, ch, 0);
	snd_emu10k1_ptr_write(emu, LFOVAL1, ch, 0);
	snd_emu10k1_ptr_write(emu, ATKHLDV, ch, 0);
	snd_emu10k1_ptr_write(emu, ENVVOL, ch, 0);
	snd_emu10k1_ptr_write(emu, ENVVAL, ch, 0);

	/* Audigy extra stuffs */
	if (emu->audigy) {
		snd_emu10k1_ptr_write(emu, 0x4c, ch, 0); /* ?? */
		snd_emu10k1_ptr_write(emu, 0x4d, ch, 0); /* ?? */
		snd_emu10k1_ptr_write(emu, 0x4e, ch, 0); /* ?? */
		snd_emu10k1_ptr_write(emu, 0x4f, ch, 0); /* ?? */
		snd_emu10k1_ptr_write(emu, A_FXRT1, ch, 0x03020100);
		snd_emu10k1_ptr_write(emu, A_FXRT2, ch, 0x3f3f3f3f);
		snd_emu10k1_ptr_write(emu, A_SENDAMOUNTS, ch, 0);
	}
}

static unsigned int spi_dac_init[] = {
		0x00ff,
		0x02ff,
		0x0400,
		0x0520,
		0x0600,
		0x08ff,
		0x0aff,
		0x0cff,
		0x0eff,
		0x10ff,
		0x1200,
		0x1400,
		0x1480,
		0x1800,
		0x1aff,
		0x1cff,
		0x1e00,
		0x0530,
		0x0602,
		0x0622,
		0x1400,
};

static unsigned int i2c_adc_init[][2] = {
	{ 0x17, 0x00 }, /* Reset */
	{ 0x07, 0x00 }, /* Timeout */
	{ 0x0b, 0x22 },  /* Interface control */
	{ 0x0c, 0x22 },  /* Master mode control */
	{ 0x0d, 0x08 },  /* Powerdown control */
	{ 0x0e, 0xcf },  /* Attenuation Left  0x01 = -103dB, 0xff = 24dB */
	{ 0x0f, 0xcf },  /* Attenuation Right 0.5dB steps */
	{ 0x10, 0x7b },  /* ALC Control 1 */
	{ 0x11, 0x00 },  /* ALC Control 2 */
	{ 0x12, 0x32 },  /* ALC Control 3 */
	{ 0x13, 0x00 },  /* Noise gate control */
	{ 0x14, 0xa6 },  /* Limiter control */
	{ 0x15, ADC_MUX_2 },  /* ADC Mixer control. Mic for Audigy 2 ZS Notebook */
};
	
static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
{
	unsigned int silent_page;
	int ch;
	u32 tmp;

	/* disable audio and lock cache */
	outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE,
	     emu->port + HCFG);

	/* reset recording buffers */
	snd_emu10k1_ptr_write(emu, MICBS, 0, ADCBS_BUFSIZE_NONE);
	snd_emu10k1_ptr_write(emu, MICBA, 0, 0);
	snd_emu10k1_ptr_write(emu, FXBS, 0, ADCBS_BUFSIZE_NONE);
	snd_emu10k1_ptr_write(emu, FXBA, 0, 0);
	snd_emu10k1_ptr_write(emu, ADCBS, 0, ADCBS_BUFSIZE_NONE);
	snd_emu10k1_ptr_write(emu, ADCBA, 0, 0);

	/* disable channel interrupt */
	outl(0, emu->port + INTE);
	snd_emu10k1_ptr_write(emu, CLIEL, 0, 0);
	snd_emu10k1_ptr_write(emu, CLIEH, 0, 0);
	snd_emu10k1_ptr_write(emu, SOLEL, 0, 0);
	snd_emu10k1_ptr_write(emu, SOLEH, 0, 0);

	if (emu->audigy){
		/* set SPDIF bypass mode */
		snd_emu10k1_ptr_write(emu, SPBYPASS, 0, SPBYPASS_FORMAT);
		/* enable rear left + rear right AC97 slots */
		snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_REAR_RIGHT |
				      AC97SLOT_REAR_LEFT);
	}

	/* init envelope engine */
	for (ch = 0; ch < NUM_G; ch++)
		snd_emu10k1_voice_init(emu, ch);

	snd_emu10k1_ptr_write(emu, SPCS0, 0, emu->spdif_bits[0]);
	snd_emu10k1_ptr_write(emu, SPCS1, 0, emu->spdif_bits[1]);
	snd_emu10k1_ptr_write(emu, SPCS2, 0, emu->spdif_bits[2]);

	if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
		/* Hacks for Alice3 to work independent of haP16V driver */
		//Setup SRCMulti_I2S SamplingRate
		tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
		tmp &= 0xfffff1ff;
		tmp |= (0x2<<9);
		snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp);
		
		/* Setup SRCSel (Enable Spdif,I2S SRCMulti) */
		snd_emu10k1_ptr20_write(emu, SRCSel, 0, 0x14);
		/* Setup SRCMulti Input Audio Enable */
		/* Use 0xFFFFFFFF to enable P16V sounds. */
		snd_emu10k1_ptr20_write(emu, SRCMULTI_ENABLE, 0, 0xFFFFFFFF);

		/* Enabled Phased (8-channel) P16V playback */
		outl(0x0201, emu->port + HCFG2);
		/* Set playback routing. */
		snd_emu10k1_ptr20_write(emu, CAPTURE_P16V_SOURCE, 0, 0x78e4);
	}
	if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
		/* Hacks for Alice3 to work independent of haP16V driver */
		snd_printk(KERN_INFO "Audigy2 value: Special config.\n");
		//Setup SRCMulti_I2S SamplingRate
		tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
		tmp &= 0xfffff1ff;
		tmp |= (0x2<<9);
		snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp);

		/* Setup SRCSel (Enable Spdif,I2S SRCMulti) */
		outl(0x600000, emu->port + 0x20);
		outl(0x14, emu->port + 0x24);

		/* Setup SRCMulti Input Audio Enable */
		outl(0x7b0000, emu->port + 0x20);
		outl(0xFF000000, emu->port + 0x24);

		/* Setup SPDIF Out Audio Enable */
		/* The Audigy 2 Value has a separate SPDIF out,
		 * so no need for a mixer switch
		 */
		outl(0x7a0000, emu->port + 0x20);
		outl(0xFF000000, emu->port + 0x24);
		tmp = inl(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */
		outl(tmp, emu->port + A_IOCFG);
	}
	if (emu->card_capabilities->spi_dac) { /* Audigy 2 ZS Notebook with DAC Wolfson WM8768/WM8568 */
		int size, n;

		size = ARRAY_SIZE(spi_dac_init);
		for (n = 0; n < size; n++)
			snd_emu10k1_spi_write(emu, spi_dac_init[n]);

		snd_emu10k1_ptr20_write(emu, 0x60, 0, 0x10);
		/* Enable GPIOs
		 * GPIO0: Unknown
		 * GPIO1: Speakers-enabled.
		 * GPIO2: Unknown
		 * GPIO3: Unknown
		 * GPIO4: IEC958 Output on.
		 * GPIO5: Unknown
		 * GPIO6: Unknown
		 * GPIO7: Unknown
		 */
		outl(0x76, emu->port + A_IOCFG); /* Windows uses 0x3f76 */

	}
	if (emu->card_capabilities->i2c_adc) { /* Audigy 2 ZS Notebook with ADC Wolfson WM8775 */
		int size, n;

		snd_emu10k1_ptr20_write(emu, P17V_I2S_SRC_SEL, 0, 0x2020205f);
		tmp = inl(emu->port + A_IOCFG);
		outl(tmp | 0x4, emu->port + A_IOCFG);  /* Set bit 2 for mic input */
		tmp = inl(emu->port + A_IOCFG);
		size = ARRAY_SIZE(i2c_adc_init);
		for (n = 0; n < size; n++)
			snd_emu10k1_i2c_write(emu, i2c_adc_init[n][0], i2c_adc_init[n][1]);
		for (n=0; n < 4; n++) {
			emu->i2c_capture_volume[n][0]= 0xcf;
			emu->i2c_capture_volume[n][1]= 0xcf;
		}

	}

	
	snd_emu10k1_ptr_write(emu, PTB, 0, emu->ptb_pages.addr);
	snd_emu10k1_ptr_write(emu, TCB, 0, 0);	/* taken from original driver */
	snd_emu10k1_ptr_write(emu, TCBS, 0, 4);	/* taken from original driver */

	silent_page = (emu->silent_page.addr << 1) | MAP_PTI_MASK;
	for (ch = 0; ch < NUM_G; ch++) {
		snd_emu10k1_ptr_write(emu, MAPA, ch, silent_page);
		snd_emu10k1_ptr_write(emu, MAPB, ch, silent_page);
	}

	if (emu->card_capabilities->emu1010) {
		outl(HCFG_AUTOMUTE_ASYNC |
			HCFG_EMU32_SLAVE |
			HCFG_AUDIOENABLE, emu->port + HCFG);
	/*
	 *  Hokay, setup HCFG
	 *   Mute Disable Audio = 0
	 *   Lock Tank Memory = 1
	 *   Lock Sound Memory = 0
	 *   Auto Mute = 1
	 */
	} else if (emu->audigy) {
		if (emu->revision == 4) /* audigy2 */
			outl(HCFG_AUDIOENABLE |
			     HCFG_AC3ENABLE_CDSPDIF |
			     HCFG_AC3ENABLE_GPSPDIF |
			     HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
		else
			outl(HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
	/* FIXME: Remove all these emu->model and replace it with a card recognition parameter,
	 * e.g. card_capabilities->joystick */
	} else if (emu->model == 0x20 ||
	    emu->model == 0xc400 ||
	    (emu->model == 0x21 && emu->revision < 6))
		outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE, emu->port + HCFG);
	else
		// With on-chip joystick
		outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);

	if (enable_ir) {	/* enable IR for SB Live */
		if (emu->card_capabilities->emu1010) {
			;  /* Disable all access to A_IOCFG for the emu1010 */
		} else if (emu->card_capabilities->i2c_adc) {
			;  /* Disable A_IOCFG for Audigy 2 ZS Notebook */
		} else if (emu->audigy) {
			unsigned int reg = inl(emu->port + A_IOCFG);
			outl(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
			udelay(500);
			outl(reg | A_IOCFG_GPOUT1 | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
			udelay(100);
			outl(reg, emu->port + A_IOCFG);
		} else {
			unsigned int reg = inl(emu->port + HCFG);
			outl(reg | HCFG_GPOUT2, emu->port + HCFG);
			udelay(500);
			outl(reg | HCFG_GPOUT1 | HCFG_GPOUT2, emu->port + HCFG);
			udelay(100);
			outl(reg, emu->port + HCFG);
 		}
	}
	
	if (emu->card_capabilities->emu1010) {
		;  /* Disable all access to A_IOCFG for the emu1010 */
	} else if (emu->card_capabilities->i2c_adc) {
		;  /* Disable A_IOCFG for Audigy 2 ZS Notebook */
	} else if (emu->audigy) {	/* enable analog output */
		unsigned int reg = inl(emu->port + A_IOCFG);
		outl(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG);
	}

	return 0;
}

static void snd_emu10k1_audio_enable(struct snd_emu10k1 *emu)
{
	/*
	 *  Enable the audio bit
	 */
	outl(inl(emu->port + HCFG) | HCFG_AUDIOENABLE, emu->port + HCFG);

	/* Enable analog/digital outs on audigy */
	if (emu->card_capabilities->emu1010) {
		;  /* Disable all access to A_IOCFG for the emu1010 */
	} else if (emu->card_capabilities->i2c_adc) {
		;  /* Disable A_IOCFG for Audigy 2 ZS Notebook */
	} else if (emu->audigy) {
		outl(inl(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG);
 
		if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
			/* Unmute Analog now.  Set GPO6 to 1 for Apollo.
			 * This has to be done after init ALice3 I2SOut beyond 48KHz.
			 * So, sequence is important. */
			outl(inl(emu->port + A_IOCFG) | 0x0040, emu->port + A_IOCFG);
		} else if (emu->card_capabilities->ca0108_chip) { /* audigy2 value */
			/* Unmute Analog now. */
			outl(inl(emu->port + A_IOCFG) | 0x0060, emu->port + A_IOCFG);
		} else {
			/* Disable routing from AC97 line out to Front speakers */
			outl(inl(emu->port + A_IOCFG) | 0x0080, emu->port + A_IOCFG);
		}
	}
	
#if 0
	{
	unsigned int tmp;
	/* FIXME: the following routine disables LiveDrive-II !! */
	// TOSLink detection
	emu->tos_link = 0;
	tmp = inl(emu->port + HCFG);
	if (tmp & (HCFG_GPINPUT0 | HCFG_GPINPUT1)) {
		outl(tmp|0x800, emu->port + HCFG);
		udelay(50);
		if (tmp != (inl(emu->port + HCFG) & ~0x800)) {
			emu->tos_link = 1;
			outl(tmp, emu->port + HCFG);
		}
	}
	}
#endif

	snd_emu10k1_intr_enable(emu, INTE_PCIERRORENABLE);
}

int snd_emu10k1_done(struct snd_emu10k1 * emu)
{
	int ch;

	outl(0, emu->port + INTE);

	/*
	 *  Shutdown the chip
	 */
	for (ch = 0; ch < NUM_G; ch++)
		snd_emu10k1_ptr_write(emu, DCYSUSV, ch, 0);
	for (ch = 0; ch < NUM_G; ch++) {
		snd_emu10k1_ptr_write(emu, VTFT, ch, 0);
		snd_emu10k1_ptr_write(emu, CVCF, ch, 0);
		snd_emu10k1_ptr_write(emu, PTRX, ch, 0);
		snd_emu10k1_ptr_write(emu, CPF, ch, 0);
	}

	/* reset recording buffers */
	snd_emu10k1_ptr_write(emu, MICBS, 0, 0);
	snd_emu10k1_ptr_write(emu, MICBA, 0, 0);
	snd_emu10k1_ptr_write(emu, FXBS, 0, 0);
	snd_emu10k1_ptr_write(emu, FXBA, 0, 0);
	snd_emu10k1_ptr_write(emu, FXWC, 0, 0);
	snd_emu10k1_ptr_write(emu, ADCBS, 0, ADCBS_BUFSIZE_NONE);
	snd_emu10k1_ptr_write(emu, ADCBA, 0, 0);
	snd_emu10k1_ptr_write(emu, TCBS, 0, TCBS_BUFFSIZE_16K);
	snd_emu10k1_ptr_write(emu, TCB, 0, 0);
	if (emu->audigy)
		snd_emu10k1_ptr_write(emu, A_DBG, 0, A_DBG_SINGLE_STEP);
	else
		snd_emu10k1_ptr_write(emu, DBG, 0, EMU10K1_DBG_SINGLE_STEP);

	/* disable channel interrupt */
	snd_emu10k1_ptr_write(emu, CLIEL, 0, 0);
	snd_emu10k1_ptr_write(emu, CLIEH, 0, 0);
	snd_emu10k1_ptr_write(emu, SOLEL, 0, 0);
	snd_emu10k1_ptr_write(emu, SOLEH, 0, 0);

	/* disable audio and lock cache */
	outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE, emu->port + HCFG);
	snd_emu10k1_ptr_write(emu, PTB, 0, 0);

	return 0;
}

/*************************************************************************
 * ECARD functional implementation
 *************************************************************************/

/* In A1 Silicon, these bits are in the HC register */
#define HOOKN_BIT		(1L << 12)
#define HANDN_BIT		(1L << 11)
#define PULSEN_BIT		(1L << 10)

#define EC_GDI1			(1 << 13)
#define EC_GDI0			(1 << 14)

#define EC_NUM_CONTROL_BITS	20

#define EC_AC3_DATA_SELN	0x0001L
#define EC_EE_DATA_SEL		0x0002L
#define EC_EE_CNTRL_SELN	0x0004L
#define EC_EECLK		0x0008L
#define EC_EECS			0x0010L
#define EC_EESDO		0x0020L
#define EC_TRIM_CSN		0x0040L
#define EC_TRIM_SCLK		0x0080L
#define EC_TRIM_SDATA		0x0100L
#define EC_TRIM_MUTEN		0x0200L
#define EC_ADCCAL		0x0400L
#define EC_ADCRSTN		0x0800L
#define EC_DACCAL		0x1000L
#define EC_DACMUTEN		0x2000L
#define EC_LEDN			0x4000L

#define EC_SPDIF0_SEL_SHIFT	15
#define EC_SPDIF1_SEL_SHIFT	17
#define EC_SPDIF0_SEL_MASK	(0x3L << EC_SPDIF0_SEL_SHIFT)
#define EC_SPDIF1_SEL_MASK	(0x7L << EC_SPDIF1_SEL_SHIFT)
#define EC_SPDIF0_SELECT(_x)	(((_x) << EC_SPDIF0_SEL_SHIFT) & EC_SPDIF0_SEL_MASK)
#define EC_SPDIF1_SELECT(_x)	(((_x) << EC_SPDIF1_SEL_SHIFT) & EC_SPDIF1_SEL_MASK)
#define EC_CURRENT_PROM_VERSION 0x01	/* Self-explanatory.  This should
					 * be incremented any time the EEPROM's
					 * format is changed.  */

#define EC_EEPROM_SIZE		0x40	/* ECARD EEPROM has 64 16-bit words */

/* Addresses for special values stored in to EEPROM */
#define EC_PROM_VERSION_ADDR	0x20	/* Address of the current prom version */
#define EC_BOARDREV0_ADDR	0x21	/* LSW of board rev */
#define EC_BOARDREV1_ADDR	0x22	/* MSW of board rev */

#define EC_LAST_PROMFILE_ADDR	0x2f

#define EC_SERIALNUM_ADDR	0x30	/* First word of serial number.  The 
					 * can be up to 30 characters in length
					 * and is stored as a NULL-terminated
					 * ASCII string.  Any unused bytes must be
					 * filled with zeros */
#define EC_CHECKSUM_ADDR	0x3f	/* Location at which checksum is stored */


/* Most of this stuff is pretty self-evident.  According to the hardware 
 * dudes, we need to leave the ADCCAL bit low in order to avoid a DC 
 * offset problem.  Weird.
 */
#define EC_RAW_RUN_MODE		(EC_DACMUTEN | EC_ADCRSTN | EC_TRIM_MUTEN | \
				 EC_TRIM_CSN)


#define EC_DEFAULT_ADC_GAIN	0xC4C4
#define EC_DEFAULT_SPDIF0_SEL	0x0
#define EC_DEFAULT_SPDIF1_SEL	0x4

/**************************************************************************
 * @func Clock bits into the Ecard's control latch.  The Ecard uses a
 *  control latch will is loaded bit-serially by toggling the Modem control
 *  lines from function 2 on the E8010.  This function hides these details
 *  and presents the illusion that we are actually writing to a distinct
 *  register.
 */

static void snd_emu10k1_ecard_write(struct snd_emu10k1 * emu, unsigned int value)
{
	unsigned short count;
	unsigned int data;
	unsigned long hc_port;
	unsigned int hc_value;

	hc_port = emu->port + HCFG;
	hc_value = inl(hc_port) & ~(HOOKN_BIT | HANDN_BIT | PULSEN_BIT);
	outl(hc_value, hc_port);

	for (count = 0; count < EC_NUM_CONTROL_BITS; count++) {

		/* Set up the value */
		data = ((value & 0x1) ? PULSEN_BIT : 0);
		value >>= 1;

		outl(hc_value | data, hc_port);

		/* Clock the shift register */
		outl(hc_value | data | HANDN_BIT, hc_port);
		outl(hc_value | data, hc_port);
	}

	/* Latch the bits */
	outl(hc_value | HOOKN_BIT, hc_port);
	outl(hc_value, hc_port);
}

/**************************************************************************
 * @func Set the gain of the ECARD's CS3310 Trim/gain controller.  The
 * trim value consists of a 16bit value which is composed of two
 * 8 bit gain/trim values, one for the left channel and one for the
 * right channel.  The following table maps from the Gain/Attenuation
 * value in decibels into the corresponding bit pattern for a single
 * channel.
 */

static void snd_emu10k1_ecard_setadcgain(struct snd_emu10k1 * emu,
					 unsigned short gain)
{
	unsigned int bit;

	/* Enable writing to the TRIM registers */
	snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN);

	/* Do it again to insure that we meet hold time requirements */
	snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN);

	for (bit = (1 << 15); bit; bit >>= 1) {
		unsigned int value;
		
		value = emu->ecard_ctrl & ~(EC_TRIM_CSN | EC_TRIM_SDATA);

		if (gain & bit)
			value |= EC_TRIM_SDATA;

		/* Clock the bit */
		snd_emu10k1_ecard_write(emu, value);
		snd_emu10k1_ecard_write(emu, value | EC_TRIM_SCLK);
		snd_emu10k1_ecard_write(emu, value);
	}

	snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
}

static int snd_emu10k1_ecard_init(struct snd_emu10k1 * emu)
{
	unsigned int hc_value;

	/* Set up the initial settings */
	emu->ecard_ctrl = EC_RAW_RUN_MODE |
			  EC_SPDIF0_SELECT(EC_DEFAULT_SPDIF0_SEL) |
			  EC_SPDIF1_SELECT(EC_DEFAULT_SPDIF1_SEL);

	/* Step 0: Set the codec type in the hardware control register 
	 * and enable audio output */
	hc_value = inl(emu->port + HCFG);
	outl(hc_value | HCFG_AUDIOENABLE | HCFG_CODECFORMAT_I2S, emu->port + HCFG);
	inl(emu->port + HCFG);

	/* Step 1: Turn off the led and deassert TRIM_CS */
	snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN);

	/* Step 2: Calibrate the ADC and DAC */
	snd_emu10k1_ecard_write(emu, EC_DACCAL | EC_LEDN | EC_TRIM_CSN);

	/* Step 3: Wait for awhile;   XXX We can't get away with this
	 * under a real operating system; we'll need to block and wait that
	 * way. */
	snd_emu10k1_wait(emu, 48000);

	/* Step 4: Switch off the DAC and ADC calibration.  Note
	 * That ADC_CAL is actually an inverted signal, so we assert
	 * it here to stop calibration.  */
	snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN);

	/* Step 4: Switch into run mode */
	snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);

	/* Step 5: Set the analog input gain */
	snd_emu10k1_ecard_setadcgain(emu, EC_DEFAULT_ADC_GAIN);

	return 0;
}

static int snd_emu10k1_cardbus_init(struct snd_emu10k1 * emu)
{
	unsigned long special_port;
	unsigned int value;

	/* Special initialisation routine
	 * before the rest of the IO-Ports become active.
	 */
	special_port = emu->port + 0x38;
	value = inl(special_port);
	outl(0x00d00000, special_port);
	value = inl(special_port);
	outl(0x00d00001, special_port);
	value = inl(special_port);
	outl(0x00d0005f, special_port);
	value = inl(special_port);
	outl(0x00d0007f, special_port);
	value = inl(special_port);
	outl(0x0090007f, special_port);
	value = inl(special_port);

	snd_emu10k1_ptr20_write(emu, TINA2_VOLUME, 0, 0xfefefefe); /* Defaults to 0x30303030 */
	return 0;
}

static int snd_emu1010_load_firmware(struct snd_emu10k1 * emu, const char * filename)
{
	int err;
	int n, i;
	int reg;
	int value;
	const struct firmware *fw_entry;

	if ((err = request_firmware(&fw_entry, filename, &emu->pci->dev)) != 0) {
		snd_printk(KERN_ERR "firmware: %s not found. Err=%d\n",filename, err);
		return err;
	}
	snd_printk(KERN_INFO "firmware size=0x%zx\n", fw_entry->size);
	if (fw_entry->size != 0x133a4) {
		snd_printk(KERN_ERR "firmware: %s wrong size.\n",filename);
		return -EINVAL;
	}

	/* The FPGA is a Xilinx Spartan IIE XC2S50E */
	/* GPIO7 -> FPGA PGMN
	 * GPIO6 -> FPGA CCLK
	 * GPIO5 -> FPGA DIN
	 * FPGA CONFIG OFF -> FPGA PGMN
	 */
	outl(0x00, emu->port + A_IOCFG); /* Set PGMN low for 1uS. */
	udelay(1);
	outl(0x80, emu->port + A_IOCFG); /* Leave bit 7 set during netlist setup. */
	udelay(100); /* Allow FPGA memory to clean */
	for(n = 0; n < fw_entry->size; n++) {
		value=fw_entry->data[n];	
		for(i = 0; i < 8; i++) {
			reg = 0x80;
			if (value & 0x1)
				reg = reg | 0x20;
			value = value >> 1;   
			outl(reg, emu->port + A_IOCFG);
			outl(reg | 0x40, emu->port + A_IOCFG);
		}
	}
	/* After programming, set GPIO bit 4 high again. */
	outl(0x10, emu->port + A_IOCFG);
	

        release_firmware(fw_entry);
	return 0;
}

static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
{
	unsigned int i;
	int tmp,tmp2;
	int reg;
	int err;

	snd_printk(KERN_INFO "emu1010: Special config.\n");
	/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
	 * Lock Sound Memory Cache, Lock Tank Memory Cache,
	 * Mute all codecs.
	 */
	outl(0x0005a00c, emu->port + HCFG);
	/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
	 * Lock Tank Memory Cache,
	 * Mute all codecs.
	 */
	outl(0x0005a004, emu->port + HCFG); 
	/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
	 * Mute all codecs.
	 */
	outl(0x0005a000, emu->port + HCFG);
	/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
	 * Mute all codecs.
	 */
	outl(0x0005a000, emu->port + HCFG);

	/* Disable 48Volt power to Audio Dock */
	snd_emu1010_fpga_write(emu,  EMU_HANA_DOCK_PWR,  0 );

	/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
	snd_printdd("reg1=0x%x\n",reg);
	if (reg == 0x55) {
		/* FPGA netlist already present so clear it */
		/* Return to programming mode */

		snd_emu1010_fpga_write(emu,  EMU_HANA_FPGA_CONFIG, 0x02 );
	}
	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
	snd_printdd("reg2=0x%x\n",reg);
	if (reg == 0x55) {
		/* FPGA failed to return to programming mode */
		return -ENODEV;
	}
	snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg);
	if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) {
		snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME);
		return err;
	}

	/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
	if (reg != 0x55) {
		/* FPGA failed to be programmed */
		snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg=0x%x\n", reg);
		return -ENODEV;
	}

	snd_printk(KERN_INFO "emu1010: Hana Firmware loaded\n");
	snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp );
	snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2 );
	snd_printk("Hana ver:%d.%d\n",tmp ,tmp2);
	/* Enable 48Volt power to Audio Dock */
	snd_emu1010_fpga_write(emu,  EMU_HANA_DOCK_PWR,  EMU_HANA_DOCK_PWR_ON );

	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg );
	snd_printk(KERN_INFO "emu1010: Card options=0x%x\n",reg);
	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg );
	snd_printk(KERN_INFO "emu1010: Card options=0x%x\n",reg);
	snd_emu1010_fpga_read(emu, EMU_HANA_OPTICAL_TYPE, &tmp ); 
	/* ADAT input. */
	snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, 0x01 );
	snd_emu1010_fpga_read(emu, EMU_HANA_ADC_PADS, &tmp );
	/* Set no attenuation on Audio Dock pads. */
	snd_emu1010_fpga_write(emu, EMU_HANA_ADC_PADS, 0x00 );
	emu->emu1010.adc_pads = 0x00;
	snd_emu1010_fpga_read(emu, EMU_HANA_DOCK_MISC, &tmp );
	/* Unmute Audio dock DACs, Headphone source DAC-4. */
	snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_MISC, 0x30 );
	snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12 );
	snd_emu1010_fpga_read(emu, EMU_HANA_DAC_PADS, &tmp );
	/* DAC PADs. */
	snd_emu1010_fpga_write(emu, EMU_HANA_DAC_PADS, 0x0f );
	emu->emu1010.dac_pads = 0x0f;
	snd_emu1010_fpga_read(emu, EMU_HANA_DOCK_MISC, &tmp );
	snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_MISC, 0x30 );
	snd_emu1010_fpga_read(emu, EMU_HANA_SPDIF_MODE, &tmp );
	/* SPDIF Format. Set Consumer mode, 24bit, copy enable */
	snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, 0x10 );
	/* MIDI routing */
	snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19 );
	/* Unknown. */
	snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c );
	/* snd_emu1010_fpga_write(emu, 0x09, 0x0f ); // IRQ Enable: All on */
	/* IRQ Enable: All off */
	snd_emu1010_fpga_write(emu, EMU_HANA_IRQ_ENABLE, 0x00 );

	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg );
	snd_printk(KERN_INFO "emu1010: Card options3=0x%x\n",reg);
	/* Default WCLK set to 48kHz. */
	snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x00 );
	/* Word Clock source, Internal 48kHz x1 */
	snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K );
	//snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X );
	/* Audio Dock LEDs. */
	snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12 );

#if 0
	/* For 96kHz */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_0, EMU_SRC_HAMOA_ADC_LEFT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_1, EMU_SRC_HAMOA_ADC_RIGHT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_4, EMU_SRC_HAMOA_ADC_LEFT2);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_5, EMU_SRC_HAMOA_ADC_RIGHT2);
#endif
#if 0
	/* For 192kHz */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_0, EMU_SRC_HAMOA_ADC_LEFT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_1, EMU_SRC_HAMOA_ADC_RIGHT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_2, EMU_SRC_HAMOA_ADC_LEFT2);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_3, EMU_SRC_HAMOA_ADC_RIGHT2);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_4, EMU_SRC_HAMOA_ADC_LEFT3);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_5, EMU_SRC_HAMOA_ADC_RIGHT3);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_6, EMU_SRC_HAMOA_ADC_LEFT4);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_7, EMU_SRC_HAMOA_ADC_RIGHT4);
#endif
#if 1
	/* For 48kHz */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_0, EMU_SRC_DOCK_MIC_A1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_1, EMU_SRC_DOCK_MIC_B1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_2, EMU_SRC_HAMOA_ADC_LEFT2);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_3, EMU_SRC_HAMOA_ADC_LEFT2);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_4, EMU_SRC_DOCK_ADC1_LEFT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_5, EMU_SRC_DOCK_ADC1_RIGHT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_6, EMU_SRC_DOCK_ADC2_LEFT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_7, EMU_SRC_DOCK_ADC2_RIGHT1);
#endif
#if 0
	/* Original */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_4, EMU_SRC_HANA_ADAT);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_5, EMU_SRC_HANA_ADAT + 1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_6, EMU_SRC_HANA_ADAT + 2);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_7, EMU_SRC_HANA_ADAT + 3);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_8, EMU_SRC_HANA_ADAT + 4);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_9, EMU_SRC_HANA_ADAT + 5);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_A, EMU_SRC_HANA_ADAT + 6);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_B, EMU_SRC_HANA_ADAT + 7);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_C, EMU_SRC_DOCK_MIC_A1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_D, EMU_SRC_DOCK_MIC_B1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_E, EMU_SRC_HAMOA_ADC_LEFT2);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE2_EMU32_F, EMU_SRC_HAMOA_ADC_LEFT2);
#endif
	for (i = 0;i < 0x20; i++ ) {
		/* AudioDock Elink <-  Silence */
		snd_emu1010_fpga_link_dst_src_write(emu, 0x0100+i, EMU_SRC_SILENCE);
	}
	for (i = 0;i < 4; i++) {
		/* Hana SPDIF Out <- Silence */
		snd_emu1010_fpga_link_dst_src_write(emu, 0x0200+i, EMU_SRC_SILENCE);
	}
	for (i = 0;i < 7; i++) {
		/* Hamoa DAC <- Silence */
		snd_emu1010_fpga_link_dst_src_write(emu, 0x0300+i, EMU_SRC_SILENCE);
	}
	for (i = 0;i < 7; i++) {
		/* Hana ADAT Out <- Silence */
		snd_emu1010_fpga_link_dst_src_write(emu, EMU_DST_HANA_ADAT + i, EMU_SRC_SILENCE);
	}
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE_I2S0_LEFT, EMU_SRC_DOCK_ADC1_LEFT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE_I2S0_RIGHT, EMU_SRC_DOCK_ADC1_RIGHT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE_I2S1_LEFT, EMU_SRC_DOCK_ADC2_LEFT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE_I2S1_RIGHT, EMU_SRC_DOCK_ADC2_RIGHT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE_I2S2_LEFT, EMU_SRC_DOCK_ADC3_LEFT1);
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_ALICE_I2S2_RIGHT, EMU_SRC_DOCK_ADC3_RIGHT1);
	snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x01 ); // Unmute all

	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &tmp );
	
	/* AC97 1.03, Any 32Meg of 2Gig address, Auto-Mute, EMU32 Slave,
	 * Lock Sound Memory Cache, Lock Tank Memory Cache,
	 * Mute all codecs.
	 */
	outl(0x0000a000, emu->port + HCFG); 
	/* AC97 1.03, Any 32Meg of 2Gig address, Auto-Mute, EMU32 Slave,
	 * Lock Sound Memory Cache, Lock Tank Memory Cache,
	 * Un-Mute all codecs.
	 */
	outl(0x0000a001, emu->port + HCFG);
 
	/* Initial boot complete. Now patches */

	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &tmp );
	snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19 ); /* MIDI Route */
	snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c ); /* Unknown */
	snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19 ); /* MIDI Route */
	snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c ); /* Unknown */
	snd_emu1010_fpga_read(emu, EMU_HANA_SPDIF_MODE, &tmp ); 
	snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, 0x10 ); /* SPDIF Format spdif  (or 0x11 for aes/ebu) */

	/* Delay to allow Audio Dock to settle */
	msleep(100);
	snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &tmp ); /* IRQ Status */
	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg ); /* OPTIONS: Which cards are attached to the EMU */
	/* FIXME: The loading of this should be able to happen any time,
	 * as the user can plug/unplug it at any time
	 */
	if (reg & (EMU_HANA_OPTION_DOCK_ONLINE | EMU_HANA_OPTION_DOCK_OFFLINE) ) {
		/* Audio Dock attached */
		/* Return to Audio Dock programming mode */
		snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
		snd_emu1010_fpga_write(emu,  EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK );
		if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
			return err;
		}
		snd_emu1010_fpga_write(emu,  EMU_HANA_FPGA_CONFIG, 0 );
		snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &reg );
		snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS=0x%x\n",reg);
		/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
		snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
		snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID=0x%x\n",reg);
		if (reg != 0x55) {
			/* FPGA failed to be programmed */
			snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg=0x%x\n", reg);
			return 0;
			return -ENODEV;
		}
		snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n");
		snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp );
		snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2 );
		snd_printk("Audio Dock ver:%d.%d\n",tmp ,tmp2);
	}
#if 0
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HAMOA_DAC_LEFT1, EMU_SRC_ALICE_EMU32B + 2); /* ALICE2 bus 0xa2 */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HAMOA_DAC_RIGHT1, EMU_SRC_ALICE_EMU32B + 3); /* ALICE2 bus 0xa3 */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_SPDIF_LEFT1, EMU_SRC_ALICE_EMU32A + 2); /* ALICE2 bus 0xb2 */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_SPDIF_RIGHT1, EMU_SRC_ALICE_EMU32A + 3); /* ALICE2 bus 0xb3 */
#endif
	/* Default outputs */
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC1_LEFT1, EMU_SRC_ALICE_EMU32A + 0); /* ALICE2 bus 0xa0 */
	emu->emu1010.output_source[0] = 21;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC1_RIGHT1, EMU_SRC_ALICE_EMU32A + 1);
	emu->emu1010.output_source[1] = 22;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC2_LEFT1, EMU_SRC_ALICE_EMU32A + 2);
	emu->emu1010.output_source[2] = 23;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC2_RIGHT1, EMU_SRC_ALICE_EMU32A + 3);
	emu->emu1010.output_source[3] = 24;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC3_LEFT1, EMU_SRC_ALICE_EMU32A + 4);
	emu->emu1010.output_source[4] = 25;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC3_RIGHT1, EMU_SRC_ALICE_EMU32A + 5);
	emu->emu1010.output_source[5] = 26;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC4_LEFT1, EMU_SRC_ALICE_EMU32A + 6);
	emu->emu1010.output_source[6] = 27;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_DAC4_RIGHT1, EMU_SRC_ALICE_EMU32A + 7);
	emu->emu1010.output_source[7] = 28;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_PHONES_LEFT1, EMU_SRC_ALICE_EMU32A + 0); /* ALICE2 bus 0xa0 */
	emu->emu1010.output_source[8] = 21;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_PHONES_RIGHT1, EMU_SRC_ALICE_EMU32A + 1);
	emu->emu1010.output_source[9] = 22;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_SPDIF_LEFT1, EMU_SRC_ALICE_EMU32A + 0); /* ALICE2 bus 0xa0 */
	emu->emu1010.output_source[10] = 21;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_DOCK_SPDIF_RIGHT1, EMU_SRC_ALICE_EMU32A + 1);
	emu->emu1010.output_source[11] = 22;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_SPDIF_LEFT1, EMU_SRC_ALICE_EMU32A + 0); /* ALICE2 bus 0xa0 */
	emu->emu1010.output_source[12] = 21;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_SPDIF_RIGHT1, EMU_SRC_ALICE_EMU32A + 1);
	emu->emu1010.output_source[13] = 22;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HAMOA_DAC_LEFT1, EMU_SRC_ALICE_EMU32A + 0); /* ALICE2 bus 0xa0 */
	emu->emu1010.output_source[14] = 21;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HAMOA_DAC_RIGHT1, EMU_SRC_ALICE_EMU32A + 1);
	emu->emu1010.output_source[15] = 22;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT, EMU_SRC_ALICE_EMU32A + 0); /* ALICE2 bus 0xa0 */
	emu->emu1010.output_source[16] = 21;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT + 1, EMU_SRC_ALICE_EMU32A + 1);
	emu->emu1010.output_source[17] = 22;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT + 2, EMU_SRC_ALICE_EMU32A + 2);
	emu->emu1010.output_source[18] = 23;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT + 3, EMU_SRC_ALICE_EMU32A + 3);
	emu->emu1010.output_source[19] = 24;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT + 4, EMU_SRC_ALICE_EMU32A + 4);
	emu->emu1010.output_source[20] = 25;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT + 5, EMU_SRC_ALICE_EMU32A + 5);
	emu->emu1010.output_source[21] = 26;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT + 6, EMU_SRC_ALICE_EMU32A + 6);
	emu->emu1010.output_source[22] = 27;
	snd_emu1010_fpga_link_dst_src_write(emu,
		EMU_DST_HANA_ADAT + 7, EMU_SRC_ALICE_EMU32A + 7);
	emu->emu1010.output_source[23] = 28;

	/* TEMP: Select SPDIF in/out */
	snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, 0x0); /* Output spdif */

	/* TEMP: Select 48kHz SPDIF out */
	snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x0); /* Mute all */
	snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x0); /* Default fallback clock 48kHz */
	/* Word Clock source, Internal 48kHz x1 */
	snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K );
	//snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X );
	emu->emu1010.internal_clock = 1; /* 48000 */
	snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12);/* Set LEDs on Audio Dock */
	snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x1); /* Unmute all */
	//snd_emu1010_fpga_write(emu, 0x7, 0x0); /* Mute all */
	//snd_emu1010_fpga_write(emu, 0x7, 0x1); /* Unmute all */
	//snd_emu1010_fpga_write(emu, 0xe, 0x12); /* Set LEDs on Audio Dock */

	return 0;
}
/*
 *  Create the EMU10K1 instance
 */

#ifdef CONFIG_PM
static int alloc_pm_buffer(struct snd_emu10k1 *emu);
static void free_pm_buffer(struct snd_emu10k1 *emu);
#endif

static int snd_emu10k1_free(struct snd_emu10k1 *emu)
{
	if (emu->port) {	/* avoid access to already used hardware */
	       	snd_emu10k1_fx8010_tram_setup(emu, 0);
		snd_emu10k1_done(emu);
		/* remove reserved page */
		if (emu->reserved_page) {
			snd_emu10k1_synth_free(emu, (struct snd_util_memblk *)emu->reserved_page);
			emu->reserved_page = NULL;
		}
		snd_emu10k1_free_efx(emu);
       	}
	if (emu->card_capabilities->emu1010) {
		/* Disable 48Volt power to Audio Dock */
		snd_emu1010_fpga_write(emu,  EMU_HANA_DOCK_PWR,  0 );
	}
	if (emu->memhdr)
		snd_util_memhdr_free(emu->memhdr);
	if (emu->silent_page.area)
		snd_dma_free_pages(&emu->silent_page);
	if (emu->ptb_pages.area)
		snd_dma_free_pages(&emu->ptb_pages);
	vfree(emu->page_ptr_table);
	vfree(emu->page_addr_table);
#ifdef CONFIG_PM
	free_pm_buffer(emu);
#endif
	if (emu->irq >= 0)
		free_irq(emu->irq, emu);
	if (emu->port)
		pci_release_regions(emu->pci);
	if (emu->card_capabilities->ca0151_chip) /* P16V */	
		snd_p16v_free(emu);
	pci_disable_device(emu->pci);
	kfree(emu);
	return 0;
}

static int snd_emu10k1_dev_free(struct snd_device *device)
{
	struct snd_emu10k1 *emu = device->device_data;
	return snd_emu10k1_free(emu);
}

static struct snd_emu_chip_details emu_chip_details[] = {
	/* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
	/* Tested by James@superbug.co.uk 3rd July 2005 */
	/* DSP: CA0108-IAT
	 * DAC: CS4382-KQ
	 * ADC: Philips 1361T
	 * AC97: STAC9750
	 * CA0151: None
	 */
	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
	 .driver = "Audigy2", .name = "Audigy 2 Value [SB0400]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0108_chip = 1,
	 .spk71 = 1,
	 .ac97_chip = 1} ,
	/* Audigy4 (Not PRO) SB0610 */
	/* Tested by James@superbug.co.uk 4th April 2006 */
	/* A_IOCFG bits
	 * Output
	 * 0: ?
	 * 1: ?
	 * 2: ?
	 * 3: 0 - Digital Out, 1 - Line in
	 * 4: ?
	 * 5: ?
	 * 6: ?
	 * 7: ?
	 * Input
	 * 8: ?
	 * 9: ?
	 * A: Green jack sense (Front)
	 * B: ?
	 * C: Black jack sense (Rear/Side Right)
	 * D: Yellow jack sense (Center/LFE/Side Left)
	 * E: ?
	 * F: ?
	 *
	 * Digital Out/Line in switch using A_IOCFG bit 3 (0x08)
	 * 0 - Digital Out
	 * 1 - Line in
	 */
	/* Mic input not tested.
	 * Analog CD input not tested
	 * Digital Out not tested.
	 * Line in working.
	 * Audio output 5.1 working. Side outputs not working.
	 */
	/* DSP: CA10300-IAT LF
	 * DAC: Cirrus Logic CS4382-KQZ
	 * ADC: Philips 1361T
	 * AC97: Sigmatel STAC9750
	 * CA0151: None
	 */
	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
	 .driver = "Audigy2", .name = "Audigy 4 [SB0610]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0108_chip = 1,
	 .spk71 = 1,
	 .adc_1361t = 1,  /* 24 bit capture instead of 16bit */
	 .ac97_chip = 1} ,
	/* Audigy 2 ZS Notebook Cardbus card.*/
	/* Tested by James@superbug.co.uk 6th November 2006 */
	/* Audio output 7.1/Headphones working.
	 * Digital output working. (AC3 not checked, only PCM)
	 * Audio Mic/Line inputs working.
	 * Digital input not tested.
	 */ 
	/* DSP: Tina2
	 * DAC: Wolfson WM8768/WM8568
	 * ADC: Wolfson WM8775
	 * AC97: None
	 * CA0151: None
	 */
	/* Tested by James@superbug.co.uk 4th April 2006 */
	/* A_IOCFG bits
	 * Output
	 * 0: Not Used
	 * 1: 0 = Mute all the 7.1 channel out. 1 = unmute.
	 * 2: Analog input 0 = line in, 1 = mic in
	 * 3: Not Used
	 * 4: Digital output 0 = off, 1 = on.
	 * 5: Not Used
	 * 6: Not Used
	 * 7: Not Used
	 * Input
	 *      All bits 1 (0x3fxx) means nothing plugged in.
	 * 8-9: 0 = Line in/Mic, 2 = Optical in, 3 = Nothing.
	 * A-B: 0 = Headphones, 2 = Optical out, 3 = Nothing.
	 * C-D: 2 = Front/Rear/etc, 3 = nothing.
	 * E-F: Always 0
	 *
	 */
	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x20011102,
	 .driver = "Audigy2", .name = "Audigy 2 ZS Notebook [SB0530]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0108_chip = 1,
	 .ca_cardbus_chip = 1,
	 .spi_dac = 1,
	 .i2c_adc = 1,
	 .spk71 = 1} ,
	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x42011102,
	 .driver = "Audigy2", .name = "E-mu 1010 Notebook [MAEM8950]", 
	 .id = "EMU1010",
	 .emu10k2_chip = 1,
	 .ca0108_chip = 1,
	 .ca_cardbus_chip = 1,
	 .spi_dac = 1,
	 .i2c_adc = 1,
	 .spk71 = 1} ,
	{.vendor = 0x1102, .device = 0x0008, 
	 .driver = "Audigy2", .name = "Audigy 2 Value [Unknown]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0108_chip = 1,
	 .ac97_chip = 1} ,
	/* Tested by James@superbug.co.uk 8th July 2005. No sound available yet. */
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
	 .driver = "Audigy2", .name = "E-mu 1010 [4001]", 
	 .id = "EMU1010",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .spk71 = 1,
	 .emu1010 = 1} ,
	/* Tested by James@superbug.co.uk 3rd July 2005 */
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20071102,
	 .driver = "Audigy2", .name = "Audigy 4 PRO [SB0380]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1,
	 .ac97_chip = 1} ,
	/* Tested by shane-alsa@cm.nu 5th Nov 2005 */
	/* The 0x20061102 does have SB0350 written on it
	 * Just like 0x20021102
	 */
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20061102,
	 .driver = "Audigy2", .name = "Audigy 2 [SB0350b]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20021102,
	 .driver = "Audigy2", .name = "Audigy 2 ZS [SB0350]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20011102,
	 .driver = "Audigy2", .name = "Audigy 2 ZS [2001]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1,
	 .ac97_chip = 1} ,
	/* Audigy 2 */
	/* Tested by James@superbug.co.uk 3rd July 2005 */
	/* DSP: CA0102-IAT
	 * DAC: CS4382-KQ
	 * ADC: Philips 1361T
	 * AC97: STAC9721
	 * CA0151: Yes
	 */
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10071102,
	 .driver = "Audigy2", .name = "Audigy 2 [SB0240]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1,
	 .adc_1361t = 1,  /* 24 bit capture instead of 16bit */
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10051102,
	 .driver = "Audigy2", .name = "Audigy 2 EX [1005]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1} ,
	/* Dell OEM/Creative Labs Audigy 2 ZS */
	/* See ALSA bug#1365 */
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10031102,
	 .driver = "Audigy2", .name = "Audigy 2 ZS [SB0353]",
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
	 .driver = "Audigy2", .name = "Audigy 2 Platinum [SB0240P]", 
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spk71 = 1,
	 .spdif_bug = 1,
	 .adc_1361t = 1,  /* 24 bit capture instead of 16bit. Fixes ALSA bug#324 */
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .revision = 0x04,
	 .driver = "Audigy2", .name = "Audigy 2 [Unknown]",
	 .id = "Audigy2",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ca0151_chip = 1,
	 .spdif_bug = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00531102,
	 .driver = "Audigy", .name = "Audigy 1 [SB0090]", 
	 .id = "Audigy",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00521102,
	 .driver = "Audigy", .name = "Audigy 1 ES [SB0160]", 
	 .id = "Audigy",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .spdif_bug = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00511102,
	 .driver = "Audigy", .name = "Audigy 1 [SB0090]", 
	 .id = "Audigy",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0004,
	 .driver = "Audigy", .name = "Audigy 1 [Unknown]", 
	 .id = "Audigy",
	 .emu10k2_chip = 1,
	 .ca0102_chip = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806B1102,
	 .driver = "EMU10K1", .name = "SBLive! [SB0105]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806A1102,
	 .driver = "EMU10K1", .name = "SBLive! Value [SB0103]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80691102,
	 .driver = "EMU10K1", .name = "SBLive! Value [SB0101]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	/* Tested by ALSA bug#1680 26th December 2005 */
	/* note: It really has SB0220 written on the card. */
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80661102,
	 .driver = "EMU10K1", .name = "SB Live 5.1 Dell OEM [SB0220]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	/* Tested by Thomas Zehetbauer 27th Aug 2005 */
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80651102,
	 .driver = "EMU10K1", .name = "SB Live 5.1 [SB0220]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x100a1102,
	 .driver = "EMU10K1", .name = "SB Live 5.1 [SB0220]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
	 .driver = "EMU10K1", .name = "SB Live 5.1", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	/* Tested by alsa bugtrack user "hus" bug #1297 12th Aug 2005 */
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102,
	 .driver = "EMU10K1", .name = "SBLive 5.1 [SB0060]",
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 2, /* ac97 is optional; both SBLive 5.1 and platinum
			  * share the same IDs!
			  */
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4850]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
	 .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80321102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4871]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80311102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4831]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80281102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4870]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	/* Tested by James@superbug.co.uk 3rd July 2005 */
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80261102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4830]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80231102,
	 .driver = "EMU10K1", .name = "SB PCI512 [CT4790]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80221102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4780]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102,
	 .driver = "EMU10K1", .name = "E-mu APS [4001]", 
	 .id = "APS",
	 .emu10k1_chip = 1,
	 .ecard = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00211102,
	 .driver = "EMU10K1", .name = "SBLive! [CT4620]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00201102,
	 .driver = "EMU10K1", .name = "SBLive! Value [CT4670]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{.vendor = 0x1102, .device = 0x0002,
	 .driver = "EMU10K1", .name = "SB Live [Unknown]", 
	 .id = "Live",
	 .emu10k1_chip = 1,
	 .ac97_chip = 1,
	 .sblive51 = 1} ,
	{ } /* terminator */
};

int __devinit snd_emu10k1_create(struct snd_card *card,
		       struct pci_dev * pci,
		       unsigned short extin_mask,
		       unsigned short extout_mask,
		       long max_cache_bytes,
		       int enable_ir,
		       uint subsystem,
		       struct snd_emu10k1 ** remu)
{
	struct snd_emu10k1 *emu;
	int idx, err;
	int is_audigy;
	unsigned char revision;
	unsigned int silent_page;
	const struct snd_emu_chip_details *c;
	static struct snd_device_ops ops = {
		.dev_free =	snd_emu10k1_dev_free,
	};
	
	*remu = NULL;

	/* enable PCI device */
	if ((err = pci_enable_device(pci)) < 0)
		return err;

	emu = kzalloc(sizeof(*emu), GFP_KERNEL);
	if (emu == NULL) {
		pci_disable_device(pci);
		return -ENOMEM;
	}
	emu->card = card;
	spin_lock_init(&emu->reg_lock);
	spin_lock_init(&emu->emu_lock);
	spin_lock_init(&emu->voice_lock);
	spin_lock_init(&emu->synth_lock);
	spin_lock_init(&emu->memblk_lock);
	mutex_init(&emu->fx8010.lock);
	INIT_LIST_HEAD(&emu->mapped_link_head);
	INIT_LIST_HEAD(&emu->mapped_order_link_head);
	emu->pci = pci;
	emu->irq = -1;
	emu->synth = NULL;
	emu->get_synth_voice = NULL;
	/* read revision & serial */
	pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
	emu->revision = revision;
	pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
	pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
	snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model);

	for (c = emu_chip_details; c->vendor; c++) {
		if (c->vendor == pci->vendor && c->device == pci->device) {
			if (subsystem) {
				if (c->subsystem && (c->subsystem == subsystem) ) {
					break;
				} else continue;
			} else {
				if (c->subsystem && (c->subsystem != emu->serial) )
					continue;
				if (c->revision && c->revision != emu->revision)
					continue;
			}
			break;
		}
	}
	if (c->vendor == 0) {
		snd_printk(KERN_ERR "emu10k1: Card not recognised\n");
		kfree(emu);
		pci_disable_device(pci);
		return -ENOENT;
	}
	emu->card_capabilities = c;
	if (c->subsystem && !subsystem)
		snd_printdd("Sound card name=%s\n", c->name);
	else if (subsystem) 
		snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x. Forced to subsytem=0x%x\n",
		       	c->name, pci->vendor, pci->device, emu->serial, c->subsystem);
	else 
		snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x.\n",
		      	c->name, pci->vendor, pci->device, emu->serial);
	
	if (!*card->id && c->id) {
		int i, n = 0;
		strlcpy(card->id, c->id, sizeof(card->id));
		for (;;) {
			for (i = 0; i < snd_ecards_limit; i++) {
				if (snd_cards[i] && !strcmp(snd_cards[i]->id, card->id))
					break;
			}
			if (i >= snd_ecards_limit)
				break;
			n++;
			if (n >= SNDRV_CARDS)
				break;
			snprintf(card->id, sizeof(card->id), "%s_%d", c->id, n);
		}
	}

	is_audigy = emu->audigy = c->emu10k2_chip;

	/* set the DMA transfer mask */
	emu->dma_mask = is_audigy ? AUDIGY_DMA_MASK : EMU10K1_DMA_MASK;
	if (pci_set_dma_mask(pci, emu->dma_mask) < 0 ||
	    pci_set_consistent_dma_mask(pci, emu->dma_mask) < 0) {
		snd_printk(KERN_ERR "architecture does not support PCI busmaster DMA with mask 0x%lx\n", emu->dma_mask);
		kfree(emu);
		pci_disable_device(pci);
		return -ENXIO;
	}
	if (is_audigy)
		emu->gpr_base = A_FXGPREGBASE;
	else
		emu->gpr_base = FXGPREGBASE;

	if ((err = pci_request_regions(pci, "EMU10K1")) < 0) {
		kfree(emu);
		pci_disable_device(pci);
		return err;
	}
	emu->port = pci_resource_start(pci, 0);

	if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
			"EMU10K1", emu)) {
		err = -EBUSY;
		goto error;
	}
	emu->irq = pci->irq;

	emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
	if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
				32 * 1024, &emu->ptb_pages) < 0) {
		err = -ENOMEM;
		goto error;
	}

	emu->page_ptr_table = (void **)vmalloc(emu->max_cache_pages * sizeof(void*));
	emu->page_addr_table = (unsigned long*)vmalloc(emu->max_cache_pages * sizeof(unsigned long));
	if (emu->page_ptr_table == NULL || emu->page_addr_table == NULL) {
		err = -ENOMEM;
		goto error;
	}

	if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
				EMUPAGESIZE, &emu->silent_page) < 0) {
		err = -ENOMEM;
		goto error;
	}
	emu->memhdr = snd_util_memhdr_new(emu->max_cache_pages * PAGE_SIZE);
	if (emu->memhdr == NULL) {
		err = -ENOMEM;
		goto error;
	}
	emu->memhdr->block_extra_size = sizeof(struct snd_emu10k1_memblk) -
		sizeof(struct snd_util_memblk);

	pci_set_master(pci);

	emu->fx8010.fxbus_mask = 0x303f;
	if (extin_mask == 0)
		extin_mask = 0x3fcf;
	if (extout_mask == 0)
		extout_mask = 0x7fff;
	emu->fx8010.extin_mask = extin_mask;
	emu->fx8010.extout_mask = extout_mask;
	emu->enable_ir = enable_ir;

	if (emu->card_capabilities->ecard) {
		if ((err = snd_emu10k1_ecard_init(emu)) < 0)
			goto error;
	} else if (emu->card_capabilities->ca_cardbus_chip) {
		if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
			goto error;
 	} else if (emu->card_capabilities->emu1010) {
 		if ((err = snd_emu10k1_emu1010_init(emu)) < 0) {
 			snd_emu10k1_free(emu);
 			return err;
 		}
	} else {
		/* 5.1: Enable the additional AC97 Slots. If the emu10k1 version
			does not support this, it shouldn't do any harm */
		snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
	}

	/* initialize TRAM setup */
	emu->fx8010.itram_size = (16 * 1024)/2;
	emu->fx8010.etram_pages.area = NULL;
	emu->fx8010.etram_pages.bytes = 0;

	/*
	 *  Init to 0x02109204 :
	 *  Clock accuracy    = 0     (1000ppm)
	 *  Sample Rate       = 2     (48kHz)
	 *  Audio Channel     = 1     (Left of 2)
	 *  Source Number     = 0     (Unspecified)
	 *  Generation Status = 1     (Original for Cat Code 12)
	 *  Cat Code          = 12    (Digital Signal Mixer)
	 *  Mode              = 0     (Mode 0)
	 *  Emphasis          = 0     (None)
	 *  CP                = 1     (Copyright unasserted)
	 *  AN                = 0     (Audio data)
	 *  P                 = 0     (Consumer)
	 */
	emu->spdif_bits[0] = emu->spdif_bits[1] =
		emu->spdif_bits[2] = SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
		SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
		SPCS_GENERATIONSTATUS | 0x00001200 |
		0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT;

	emu->reserved_page = (struct snd_emu10k1_memblk *)
		snd_emu10k1_synth_alloc(emu, 4096);
	if (emu->reserved_page)
		emu->reserved_page->map_locked = 1;
	
	/* Clear silent pages and set up pointers */
	memset(emu->silent_page.area, 0, PAGE_SIZE);
	silent_page = emu->silent_page.addr << 1;
	for (idx = 0; idx < MAXPAGES; idx++)
		((u32 *)emu->ptb_pages.area)[idx] = cpu_to_le32(silent_page | idx);

	/* set up voice indices */
	for (idx = 0; idx < NUM_G; idx++) {
		emu->voices[idx].emu = emu;
		emu->voices[idx].number = idx;
	}

	if ((err = snd_emu10k1_init(emu, enable_ir, 0)) < 0)
		goto error;
#ifdef CONFIG_PM
	if ((err = alloc_pm_buffer(emu)) < 0)
		goto error;
#endif

	/*  Initialize the effect engine */
	if ((err = snd_emu10k1_init_efx(emu)) < 0)
		goto error;
	snd_emu10k1_audio_enable(emu);

	if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, emu, &ops)) < 0)
		goto error;

#ifdef CONFIG_PROC_FS
	snd_emu10k1_proc_init(emu);
#endif

	snd_card_set_dev(card, &pci->dev);
	*remu = emu;
	return 0;

 error:
	snd_emu10k1_free(emu);
	return err;
}

#ifdef CONFIG_PM
static unsigned char saved_regs[] = {
	CPF, PTRX, CVCF, VTFT, Z1, Z2, PSST, DSL, CCCA, CCR, CLP,
	FXRT, MAPA, MAPB, ENVVOL, ATKHLDV, DCYSUSV, LFOVAL1, ENVVAL,
	ATKHLDM, DCYSUSM, LFOVAL2, IP, IFATN, PEFE, FMMOD, TREMFRQ, FM2FRQ2,
	TEMPENV, ADCCR, FXWC, MICBA, ADCBA, FXBA,
	MICBS, ADCBS, FXBS, CDCS, GPSCS, SPCS0, SPCS1, SPCS2,
	SPBYPASS, AC97SLOT, CDSRCS, GPSRCS, ZVSRCS, MICIDX, ADCIDX, FXIDX,
	0xff /* end */
};
static unsigned char saved_regs_audigy[] = {
	A_ADCIDX, A_MICIDX, A_FXWC1, A_FXWC2, A_SAMPLE_RATE,
	A_FXRT2, A_SENDAMOUNTS, A_FXRT1,
	0xff /* end */
};

static int __devinit alloc_pm_buffer(struct snd_emu10k1 *emu)
{
	int size;

	size = ARRAY_SIZE(saved_regs);
	if (emu->audigy)
		size += ARRAY_SIZE(saved_regs_audigy);
	emu->saved_ptr = vmalloc(4 * NUM_G * size);
	if (! emu->saved_ptr)
		return -ENOMEM;
	if (snd_emu10k1_efx_alloc_pm_buffer(emu) < 0)
		return -ENOMEM;
	if (emu->card_capabilities->ca0151_chip &&
	    snd_p16v_alloc_pm_buffer(emu) < 0)
		return -ENOMEM;
	return 0;
}

static void free_pm_buffer(struct snd_emu10k1 *emu)
{
	vfree(emu->saved_ptr);
	snd_emu10k1_efx_free_pm_buffer(emu);
	if (emu->card_capabilities->ca0151_chip)
		snd_p16v_free_pm_buffer(emu);
}

void snd_emu10k1_suspend_regs(struct snd_emu10k1 *emu)
{
	int i;
	unsigned char *reg;
	unsigned int *val;

	val = emu->saved_ptr;
	for (reg = saved_regs; *reg != 0xff; reg++)
		for (i = 0; i < NUM_G; i++, val++)
			*val = snd_emu10k1_ptr_read(emu, *reg, i);
	if (emu->audigy) {
		for (reg = saved_regs_audigy; *reg != 0xff; reg++)
			for (i = 0; i < NUM_G; i++, val++)
				*val = snd_emu10k1_ptr_read(emu, *reg, i);
	}
	if (emu->audigy)
		emu->saved_a_iocfg = inl(emu->port + A_IOCFG);
	emu->saved_hcfg = inl(emu->port + HCFG);
}

void snd_emu10k1_resume_init(struct snd_emu10k1 *emu)
{
	if (emu->card_capabilities->ecard)
		snd_emu10k1_ecard_init(emu);
	else if (emu->card_capabilities->ca_cardbus_chip)
		snd_emu10k1_cardbus_init(emu);
	else if (emu->card_capabilities->emu1010)
 		snd_emu10k1_emu1010_init(emu);
	else
		snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
	snd_emu10k1_init(emu, emu->enable_ir, 1);
}

void snd_emu10k1_resume_regs(struct snd_emu10k1 *emu)
{
	int i;
	unsigned char *reg;
	unsigned int *val;

	snd_emu10k1_audio_enable(emu);

	/* resore for spdif */
	if (emu->audigy)
		outl(emu->saved_a_iocfg, emu->port + A_IOCFG);
	outl(emu->saved_hcfg, emu->port + HCFG);

	val = emu->saved_ptr;
	for (reg = saved_regs; *reg != 0xff; reg++)
		for (i = 0; i < NUM_G; i++, val++)
			snd_emu10k1_ptr_write(emu, *reg, i, *val);
	if (emu->audigy) {
		for (reg = saved_regs_audigy; *reg != 0xff; reg++)
			for (i = 0; i < NUM_G; i++, val++)
				snd_emu10k1_ptr_write(emu, *reg, i, *val);
	}
}
#endif