Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel
V4L/DVB (4784): [saa7146_i2c] short_delay mode fixed for fast machines
V4L/DVB (4770): Fix mode switch of Compro Videomate T300
V4L/DVB (4787): Budget-ci: Inversion setting fixed for Technotrend 1500 T
V4L/DVB (4786): Pvrusb2: use NULL instead of 0
V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer default
V4L/DVB (4752): DVB: Add DVB_FE_CUSTOMISE support for MT2060
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index d882f80..dcff4d0 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -21,7 +21,7 @@
these states.
What: /sys/power/disk
-Date: August 2006
+Date: September 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/power/disk file controls the operating mode of the
@@ -39,6 +39,19 @@
'reboot' - the memory image will be saved by the kernel and
the system will be rebooted.
+ Additionally, /sys/power/disk can be used to turn on one of the
+ two testing modes of the suspend-to-disk mechanism: 'testproc'
+ or 'test'. If the suspend-to-disk mechanism is in the
+ 'testproc' mode, writing 'disk' to /sys/power/state will cause
+ the kernel to disable nonboot CPUs and freeze tasks, wait for 5
+ seconds, unfreeze tasks and enable nonboot CPUs. If it is in
+ the 'test' mode, writing 'disk' to /sys/power/state will cause
+ the kernel to disable nonboot CPUs and freeze tasks, shrink
+ memory, suspend devices, wait for 5 seconds, resume devices,
+ unfreeze tasks and enable nonboot CPUs. Then, we are able to
+ look in the log messages and work out, for example, which code
+ is being slow and which device drivers are misbehaving.
+
The suspend-to-disk method may be chosen by writing to this
file one of the accepted strings:
@@ -46,6 +59,8 @@
'platform'
'shutdown'
'reboot'
+ 'testproc'
+ 'test'
It will only change to 'firmware' or 'platform' if the system
supports that.
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 3bf5086..db9499a 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -9,7 +9,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml \
- kernel-api.xml filesystems.xml journal-api.xml lsm.xml usb.xml \
+ kernel-api.xml filesystems.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 4785032..39fa2ab 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -98,4 +98,304 @@
</sect1>
</chapter>
+ <chapter id="LinuxJDBAPI">
+ <chapterinfo>
+ <title>The Linux Journalling API</title>
+
+ <authorgroup>
+ <author>
+ <firstname>Roger</firstname>
+ <surname>Gammans</surname>
+ <affiliation>
+ <address>
+ <email>rgammans@computer-surgery.co.uk</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <authorgroup>
+ <author>
+ <firstname>Stephen</firstname>
+ <surname>Tweedie</surname>
+ <affiliation>
+ <address>
+ <email>sct@redhat.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2002</year>
+ <holder>Roger Gammans</holder>
+ </copyright>
+ </chapterinfo>
+
+ <title>The Linux Journalling API</title>
+
+ <sect1>
+ <title>Overview</title>
+ <sect2>
+ <title>Details</title>
+<para>
+The journalling layer is easy to use. You need to
+first of all create a journal_t data structure. There are
+two calls to do this dependent on how you decide to allocate the physical
+media on which the journal resides. The journal_init_inode() call
+is for journals stored in filesystem inodes, or the journal_init_dev()
+call can be use for journal stored on a raw device (in a continuous range
+of blocks). A journal_t is a typedef for a struct pointer, so when
+you are finally finished make sure you call journal_destroy() on it
+to free up any used kernel memory.
+</para>
+
+<para>
+Once you have got your journal_t object you need to 'mount' or load the journal
+file, unless of course you haven't initialised it yet - in which case you
+need to call journal_create().
+</para>
+
+<para>
+Most of the time however your journal file will already have been created, but
+before you load it you must call journal_wipe() to empty the journal file.
+Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the
+job of the client file system to detect this and skip the call to journal_wipe().
+</para>
+
+<para>
+In either case the next call should be to journal_load() which prepares the
+journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery()
+for you if it detects any outstanding transactions in the journal and similarly
+journal_load() will call journal_recover() if necessary.
+I would advise reading fs/ext3/super.c for examples on this stage.
+[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly
+complicate the API. Or isn't a good idea for the journal layer to hide
+dirty mounts from the client fs]
+</para>
+
+<para>
+Now you can go ahead and start modifying the underlying
+filesystem. Almost.
+</para>
+
+<para>
+
+You still need to actually journal your filesystem changes, this
+is done by wrapping them into transactions. Additionally you
+also need to wrap the modification of each of the buffers
+with calls to the journal layer, so it knows what the modifications
+you are actually making are. To do this use journal_start() which
+returns a transaction handle.
+</para>
+
+<para>
+journal_start()
+and its counterpart journal_stop(), which indicates the end of a transaction
+are nestable calls, so you can reenter a transaction if necessary,
+but remember you must call journal_stop() the same number of times as
+journal_start() before the transaction is completed (or more accurately
+leaves the update phase). Ext3/VFS makes use of this feature to simplify
+quota support.
+</para>
+
+<para>
+Inside each transaction you need to wrap the modifications to the
+individual buffers (blocks). Before you start to modify a buffer you
+need to call journal_get_{create,write,undo}_access() as appropriate,
+this allows the journalling layer to copy the unmodified data if it
+needs to. After all the buffer may be part of a previously uncommitted
+transaction.
+At this point you are at last ready to modify a buffer, and once
+you are have done so you need to call journal_dirty_{meta,}data().
+Or if you've asked for access to a buffer you now know is now longer
+required to be pushed back on the device you can call journal_forget()
+in much the same way as you might have used bforget() in the past.
+</para>
+
+<para>
+A journal_flush() may be called at any time to commit and checkpoint
+all your transactions.
+</para>
+
+<para>
+Then at umount time , in your put_super() (2.4) or write_super() (2.5)
+you can then call journal_destroy() to clean up your in-core journal object.
+</para>
+
+<para>
+Unfortunately there a couple of ways the journal layer can cause a deadlock.
+The first thing to note is that each task can only have
+a single outstanding transaction at any one time, remember nothing
+commits until the outermost journal_stop(). This means
+you must complete the transaction at the end of each file/inode/address
+etc. operation you perform, so that the journalling system isn't re-entered
+on another journal. Since transactions can't be nested/batched
+across differing journals, and another filesystem other than
+yours (say ext3) may be modified in a later syscall.
+</para>
+
+<para>
+The second case to bear in mind is that journal_start() can
+block if there isn't enough space in the journal for your transaction
+(based on the passed nblocks param) - when it blocks it merely(!) needs to
+wait for transactions to complete and be committed from other tasks,
+so essentially we are waiting for journal_stop(). So to avoid
+deadlocks you must treat journal_start/stop() as if they
+were semaphores and include them in your semaphore ordering rules to prevent
+deadlocks. Note that journal_extend() has similar blocking behaviour to
+journal_start() so you can deadlock here just as easily as on journal_start().
+</para>
+
+<para>
+Try to reserve the right number of blocks the first time. ;-). This will
+be the maximum number of blocks you are going to touch in this transaction.
+I advise having a look at at least ext3_jbd.h to see the basis on which
+ext3 uses to make these decisions.
+</para>
+
+<para>
+Another wriggle to watch out for is your on-disk block allocation strategy.
+why? Because, if you undo a delete, you need to ensure you haven't reused any
+of the freed blocks in a later transaction. One simple way of doing this
+is make sure any blocks you allocate only have checkpointed transactions
+listed against them. Ext3 does this in ext3_test_allocatable().
+</para>
+
+<para>
+Lock is also providing through journal_{un,}lock_updates(),
+ext3 uses this when it wants a window with a clean and stable fs for a moment.
+eg.
+</para>
+
+<programlisting>
+
+ journal_lock_updates() //stop new stuff happening..
+ journal_flush() // checkpoint everything.
+ ..do stuff on stable fs
+ journal_unlock_updates() // carry on with filesystem use.
+</programlisting>
+
+<para>
+The opportunities for abuse and DOS attacks with this should be obvious,
+if you allow unprivileged userspace to trigger codepaths containing these
+calls.
+</para>
+
+<para>
+A new feature of jbd since 2.5.25 is commit callbacks with the new
+journal_callback_set() function you can now ask the journalling layer
+to call you back when the transaction is finally committed to disk, so that
+you can do some of your own management. The key to this is the journal_callback
+struct, this maintains the internal callback information but you can
+extend it like this:-
+</para>
+<programlisting>
+ struct myfs_callback_s {
+ //Data structure element required by jbd..
+ struct journal_callback for_jbd;
+ // Stuff for myfs allocated together.
+ myfs_inode* i_commited;
+
+ }
+</programlisting>
+
+<para>
+this would be useful if you needed to know when data was committed to a
+particular inode.
+</para>
+
+ </sect2>
+
+ <sect2>
+ <title>Summary</title>
+<para>
+Using the journal is a matter of wrapping the different context changes,
+being each mount, each modification (transaction) and each changed buffer
+to tell the journalling layer about them.
+</para>
+
+<para>
+Here is a some pseudo code to give you an idea of how it works, as
+an example.
+</para>
+
+<programlisting>
+ journal_t* my_jnrl = journal_create();
+ journal_init_{dev,inode}(jnrl,...)
+ if (clean) journal_wipe();
+ journal_load();
+
+ foreach(transaction) { /*transactions must be
+ completed before
+ a syscall returns to
+ userspace*/
+
+ handle_t * xct=journal_start(my_jnrl);
+ foreach(bh) {
+ journal_get_{create,write,undo}_access(xact,bh);
+ if ( myfs_modify(bh) ) { /* returns true
+ if makes changes */
+ journal_dirty_{meta,}data(xact,bh);
+ } else {
+ journal_forget(bh);
+ }
+ }
+ journal_stop(xct);
+ }
+ journal_destroy(my_jrnl);
+</programlisting>
+ </sect2>
+
+ </sect1>
+
+ <sect1>
+ <title>Data Types</title>
+ <para>
+ The journalling layer uses typedefs to 'hide' the concrete definitions
+ of the structures used. As a client of the JBD layer you can
+ just rely on the using the pointer as a magic cookie of some sort.
+
+ Obviously the hiding is not enforced as this is 'C'.
+ </para>
+ <sect2><title>Structures</title>
+!Iinclude/linux/jbd.h
+ </sect2>
+ </sect1>
+
+ <sect1>
+ <title>Functions</title>
+ <para>
+ The functions here are split into two groups those that
+ affect a journal as a whole, and those which are used to
+ manage transactions
+ </para>
+ <sect2><title>Journal Level</title>
+!Efs/jbd/journal.c
+!Ifs/jbd/recovery.c
+ </sect2>
+ <sect2><title>Transasction Level</title>
+!Efs/jbd/transaction.c
+ </sect2>
+ </sect1>
+ <sect1>
+ <title>See also</title>
+ <para>
+ <citation>
+ <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
+ Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie
+ </ulink>
+ </citation>
+ </para>
+ <para>
+ <citation>
+ <ulink url="http://olstrans.sourceforge.net/release/OLS2000-ext3/OLS2000-ext3.html">
+ Ext3 Journalling FileSystem, OLS 2000, Dr. Stephen Tweedie
+ </ulink>
+ </citation>
+ </para>
+ </sect1>
+
+ </chapter>
+
</book>
diff --git a/Documentation/DocBook/journal-api.tmpl b/Documentation/DocBook/journal-api.tmpl
deleted file mode 100644
index 2077f9a..0000000
--- a/Documentation/DocBook/journal-api.tmpl
+++ /dev/null
@@ -1,333 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="LinuxJBDAPI">
- <bookinfo>
- <title>The Linux Journalling API</title>
- <authorgroup>
- <author>
- <firstname>Roger</firstname>
- <surname>Gammans</surname>
- <affiliation>
- <address>
- <email>rgammans@computer-surgery.co.uk</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
- <authorgroup>
- <author>
- <firstname>Stephen</firstname>
- <surname>Tweedie</surname>
- <affiliation>
- <address>
- <email>sct@redhat.com</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
- <copyright>
- <year>2002</year>
- <holder>Roger Gammans</holder>
- </copyright>
-
-<legalnotice>
- <para>
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
- </para>
-
- <para>
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- </para>
-
- <para>
- For more details see the file COPYING in the source
- distribution of Linux.
- </para>
- </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
- <chapter id="Overview">
- <title>Overview</title>
- <sect1>
- <title>Details</title>
-<para>
-The journalling layer is easy to use. You need to
-first of all create a journal_t data structure. There are
-two calls to do this dependent on how you decide to allocate the physical
-media on which the journal resides. The journal_init_inode() call
-is for journals stored in filesystem inodes, or the journal_init_dev()
-call can be use for journal stored on a raw device (in a continuous range
-of blocks). A journal_t is a typedef for a struct pointer, so when
-you are finally finished make sure you call journal_destroy() on it
-to free up any used kernel memory.
-</para>
-
-<para>
-Once you have got your journal_t object you need to 'mount' or load the journal
-file, unless of course you haven't initialised it yet - in which case you
-need to call journal_create().
-</para>
-
-<para>
-Most of the time however your journal file will already have been created, but
-before you load it you must call journal_wipe() to empty the journal file.
-Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the
-job of the client file system to detect this and skip the call to journal_wipe().
-</para>
-
-<para>
-In either case the next call should be to journal_load() which prepares the
-journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery()
-for you if it detects any outstanding transactions in the journal and similarly
-journal_load() will call journal_recover() if necessary.
-I would advise reading fs/ext3/super.c for examples on this stage.
-[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly
-complicate the API. Or isn't a good idea for the journal layer to hide
-dirty mounts from the client fs]
-</para>
-
-<para>
-Now you can go ahead and start modifying the underlying
-filesystem. Almost.
-</para>
-
-
-<para>
-
-You still need to actually journal your filesystem changes, this
-is done by wrapping them into transactions. Additionally you
-also need to wrap the modification of each of the buffers
-with calls to the journal layer, so it knows what the modifications
-you are actually making are. To do this use journal_start() which
-returns a transaction handle.
-</para>
-
-<para>
-journal_start()
-and its counterpart journal_stop(), which indicates the end of a transaction
-are nestable calls, so you can reenter a transaction if necessary,
-but remember you must call journal_stop() the same number of times as
-journal_start() before the transaction is completed (or more accurately
-leaves the update phase). Ext3/VFS makes use of this feature to simplify
-quota support.
-</para>
-
-<para>
-Inside each transaction you need to wrap the modifications to the
-individual buffers (blocks). Before you start to modify a buffer you
-need to call journal_get_{create,write,undo}_access() as appropriate,
-this allows the journalling layer to copy the unmodified data if it
-needs to. After all the buffer may be part of a previously uncommitted
-transaction.
-At this point you are at last ready to modify a buffer, and once
-you are have done so you need to call journal_dirty_{meta,}data().
-Or if you've asked for access to a buffer you now know is now longer
-required to be pushed back on the device you can call journal_forget()
-in much the same way as you might have used bforget() in the past.
-</para>
-
-<para>
-A journal_flush() may be called at any time to commit and checkpoint
-all your transactions.
-</para>
-
-<para>
-Then at umount time , in your put_super() (2.4) or write_super() (2.5)
-you can then call journal_destroy() to clean up your in-core journal object.
-</para>
-
-
-<para>
-Unfortunately there a couple of ways the journal layer can cause a deadlock.
-The first thing to note is that each task can only have
-a single outstanding transaction at any one time, remember nothing
-commits until the outermost journal_stop(). This means
-you must complete the transaction at the end of each file/inode/address
-etc. operation you perform, so that the journalling system isn't re-entered
-on another journal. Since transactions can't be nested/batched
-across differing journals, and another filesystem other than
-yours (say ext3) may be modified in a later syscall.
-</para>
-
-<para>
-The second case to bear in mind is that journal_start() can
-block if there isn't enough space in the journal for your transaction
-(based on the passed nblocks param) - when it blocks it merely(!) needs to
-wait for transactions to complete and be committed from other tasks,
-so essentially we are waiting for journal_stop(). So to avoid
-deadlocks you must treat journal_start/stop() as if they
-were semaphores and include them in your semaphore ordering rules to prevent
-deadlocks. Note that journal_extend() has similar blocking behaviour to
-journal_start() so you can deadlock here just as easily as on journal_start().
-</para>
-
-<para>
-Try to reserve the right number of blocks the first time. ;-). This will
-be the maximum number of blocks you are going to touch in this transaction.
-I advise having a look at at least ext3_jbd.h to see the basis on which
-ext3 uses to make these decisions.
-</para>
-
-<para>
-Another wriggle to watch out for is your on-disk block allocation strategy.
-why? Because, if you undo a delete, you need to ensure you haven't reused any
-of the freed blocks in a later transaction. One simple way of doing this
-is make sure any blocks you allocate only have checkpointed transactions
-listed against them. Ext3 does this in ext3_test_allocatable().
-</para>
-
-<para>
-Lock is also providing through journal_{un,}lock_updates(),
-ext3 uses this when it wants a window with a clean and stable fs for a moment.
-eg.
-</para>
-
-<programlisting>
-
- journal_lock_updates() //stop new stuff happening..
- journal_flush() // checkpoint everything.
- ..do stuff on stable fs
- journal_unlock_updates() // carry on with filesystem use.
-</programlisting>
-
-<para>
-The opportunities for abuse and DOS attacks with this should be obvious,
-if you allow unprivileged userspace to trigger codepaths containing these
-calls.
-</para>
-
-<para>
-A new feature of jbd since 2.5.25 is commit callbacks with the new
-journal_callback_set() function you can now ask the journalling layer
-to call you back when the transaction is finally committed to disk, so that
-you can do some of your own management. The key to this is the journal_callback
-struct, this maintains the internal callback information but you can
-extend it like this:-
-</para>
-<programlisting>
- struct myfs_callback_s {
- //Data structure element required by jbd..
- struct journal_callback for_jbd;
- // Stuff for myfs allocated together.
- myfs_inode* i_commited;
-
- }
-</programlisting>
-
-<para>
-this would be useful if you needed to know when data was committed to a
-particular inode.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Summary</title>
-<para>
-Using the journal is a matter of wrapping the different context changes,
-being each mount, each modification (transaction) and each changed buffer
-to tell the journalling layer about them.
-</para>
-
-<para>
-Here is a some pseudo code to give you an idea of how it works, as
-an example.
-</para>
-
-<programlisting>
- journal_t* my_jnrl = journal_create();
- journal_init_{dev,inode}(jnrl,...)
- if (clean) journal_wipe();
- journal_load();
-
- foreach(transaction) { /*transactions must be
- completed before
- a syscall returns to
- userspace*/
-
- handle_t * xct=journal_start(my_jnrl);
- foreach(bh) {
- journal_get_{create,write,undo}_access(xact,bh);
- if ( myfs_modify(bh) ) { /* returns true
- if makes changes */
- journal_dirty_{meta,}data(xact,bh);
- } else {
- journal_forget(bh);
- }
- }
- journal_stop(xct);
- }
- journal_destroy(my_jrnl);
-</programlisting>
-</sect1>
-
-</chapter>
-
- <chapter id="adt">
- <title>Data Types</title>
- <para>
- The journalling layer uses typedefs to 'hide' the concrete definitions
- of the structures used. As a client of the JBD layer you can
- just rely on the using the pointer as a magic cookie of some sort.
-
- Obviously the hiding is not enforced as this is 'C'.
- </para>
- <sect1><title>Structures</title>
-!Iinclude/linux/jbd.h
- </sect1>
-</chapter>
-
- <chapter id="calls">
- <title>Functions</title>
- <para>
- The functions here are split into two groups those that
- affect a journal as a whole, and those which are used to
- manage transactions
-</para>
- <sect1><title>Journal Level</title>
-!Efs/jbd/journal.c
-!Ifs/jbd/recovery.c
- </sect1>
- <sect1><title>Transasction Level</title>
-!Efs/jbd/transaction.c
- </sect1>
-</chapter>
-<chapter>
- <title>See also</title>
- <para>
- <citation>
- <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
- Journaling the Linux ext2fs Filesystem,LinuxExpo 98, Stephen Tweedie
- </ulink>
- </citation>
- </para>
- <para>
- <citation>
- <ulink url="http://olstrans.sourceforge.net/release/OLS2000-ext3/OLS2000-ext3.html">
- Ext3 Journalling FileSystem , OLS 2000, Dr. Stephen Tweedie
- </ulink>
- </citation>
- </para>
-</chapter>
-
-</book>
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index b11792a..bf2b0e2 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -49,7 +49,7 @@
}
/* Maximum size of response requested or message sent */
-#define MAX_MSG_SIZE 256
+#define MAX_MSG_SIZE 1024
/* Maximum number of cpus expected to be specified in a cpumask */
#define MAX_CPUS 32
/* Maximum length of pathname to log file */
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index c65233d..284e7e1 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -17,7 +17,7 @@
special place-holders for where the extracted documentation should
go.
-- scripts/docproc.c
+- scripts/basic/docproc.c
This is a program for converting SGML template files into SGML
files. When a file is referenced it is searched for symbols
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index a66bec2..74311d7 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -30,6 +30,17 @@
that is known a priori. But, the user may choose 'shutdown' or
'reboot' as alternatives.
+Additionally, /sys/power/disk can be used to turn on one of the two testing
+modes of the suspend-to-disk mechanism: 'testproc' or 'test'. If the
+suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to
+/sys/power/state will cause the kernel to disable nonboot CPUs and freeze
+tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs. If it is
+in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel
+to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait
+for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs. Then,
+we are able to look in the log messages and work out, for example, which code
+is being slow and which device drivers are misbehaving.
+
Reading from this file will display what the mode is currently set
to. Writing to this file will accept one of
@@ -37,6 +48,8 @@
'platform'
'shutdown'
'reboot'
+ 'testproc'
+ 'test'
It will only change to 'firmware' or 'platform' if the system supports
it.
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index 8dc2bac..50436e1 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -428,12 +428,6 @@
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
-AIRcable USB Dongle Bluetooth driver
- If there is the cdc_acm driver loaded in the system, you will find that the
- cdc_acm claims the device before AIRcable can. This is simply corrected
- by unloading both modules and then loading the aircable module before
- cdc_acm module
-
Generic Serial driver
If your device is not one of the above listed devices, compatible with
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 191ab85..272c011 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -21,15 +21,6 @@
struct lcdc_platform_data __initdata atstk1000_fb0_data;
-asmlinkage void __init board_early_init(void)
-{
- extern void sdram_init(void);
-
-#ifdef CONFIG_LOADER_STANDALONE
- sdram_init();
-#endif
-}
-
void __init board_setup_fbmem(unsigned long fbmem_start,
unsigned long fbmem_size)
{
diff --git a/arch/avr32/kernel/head.S b/arch/avr32/kernel/head.S
index 773b7ad..6163bd0 100644
--- a/arch/avr32/kernel/head.S
+++ b/arch/avr32/kernel/head.S
@@ -30,9 +30,6 @@
mov r7, 0
#endif
- /* Set up the PIO, SDRAM controller, early printk, etc. */
- rcall board_early_init
-
/* Start the show */
lddpc pc, kernel_start_addr
diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index 7589a9b..890286a 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -100,3 +100,12 @@
rcall sys_splice
sub sp, -4
popm pc
+
+ .global __sys_epoll_pwait
+ .type __sys_epoll_pwait,@function
+__sys_epoll_pwait:
+ pushm lr
+ st.w --sp, ARG6
+ rcall sys_epoll_pwait
+ sub sp, -4
+ popm pc
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 63b2069..db8f8b5 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -286,4 +286,5 @@
.long sys_sync_file_range
.long sys_tee
.long sys_vmsplice
+ .long __sys_epoll_pwait /* 265 */
.long sys_ni_syscall /* r8 is saturated at nr_syscalls */
diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S
index 2b4856f..c6b91de 100644
--- a/arch/avr32/lib/findbit.S
+++ b/arch/avr32/lib/findbit.S
@@ -136,6 +136,7 @@
/* offset is not word-aligned. Handle the first (32 - r10) bits */
ldswp.w r8, r12[0]
sub r12, -4
+ com r8
lsr r8, r8, r10
brne .L_found
@@ -146,7 +147,7 @@
/* Main loop. offset must be word-aligned */
1: ldswp.w r8, r12[0]
- cp.w r8, 0
+ com r8
brne .L_found
sub r12, -4
sub r9, 32
diff --git a/arch/avr32/lib/io-readsb.S b/arch/avr32/lib/io-readsb.S
index b319d5e..2be5da7 100644
--- a/arch/avr32/lib/io-readsb.S
+++ b/arch/avr32/lib/io-readsb.S
@@ -45,3 +45,5 @@
sub r10, 1
st.b r11++, r8
brne 3b
+
+ retal r12
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index ab974ff..22e4c466 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -70,7 +70,7 @@
#define PREFIX "ACPI: "
-int acpi_noirq __initdata; /* skip ACPI IRQ initialization */
+int acpi_noirq; /* skip ACPI IRQ initialization */
int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
int acpi_ht __initdata = 1; /* enable HT */
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 6d5ace8..cdfcf97 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -343,7 +343,6 @@
void pcibios_disable_device (struct pci_dev *dev)
{
- pcibios_disable_resources(dev);
if (pcibios_disable_irq)
pcibios_disable_irq(dev);
}
diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c
index 10154a2..9858029 100644
--- a/arch/i386/pci/i386.c
+++ b/arch/i386/pci/i386.c
@@ -242,15 +242,6 @@
return 0;
}
-void pcibios_disable_resources(struct pci_dev *dev)
-{
- u16 cmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index ad065ce..a0a2518 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -43,7 +43,6 @@
void pcibios_resource_survey(void);
int pcibios_enable_resources(struct pci_dev *, int);
-void pcibios_disable_resources(struct pci_dev *);
/* pci-pc.c */
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 608193c..245b81b 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -236,9 +236,6 @@
This allows you to specify the maximum frame size a function may
have without the compiler complaining about it.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
source "mm/Kconfig"
comment "I/O subsystem configuration"
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index c313e9a..7cd51e7 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -119,7 +119,6 @@
CONFIG_CHECK_STACK=y
CONFIG_STACK_GUARD=256
# CONFIG_WARN_STACK is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 49f2b68..2aa13e8 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -70,6 +70,7 @@
#define CHUNK_READ_WRITE 0
#define CHUNK_READ_ONLY 1
volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
+unsigned long __initdata zholes_size[MAX_NR_ZONES];
static unsigned long __initdata memory_end;
/*
@@ -357,6 +358,21 @@
*/
void (*pm_power_off)(void) = machine_power_off;
+static void __init
+add_memory_hole(unsigned long start, unsigned long end)
+{
+ unsigned long dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
+
+ if (end <= dma_pfn)
+ zholes_size[ZONE_DMA] += end - start + 1;
+ else if (start > dma_pfn)
+ zholes_size[ZONE_NORMAL] += end - start + 1;
+ else {
+ zholes_size[ZONE_DMA] += dma_pfn - start + 1;
+ zholes_size[ZONE_NORMAL] += end - dma_pfn;
+ }
+}
+
static int __init early_parse_mem(char *p)
{
memory_end = memparse(p, &p);
@@ -434,7 +450,7 @@
lc->extended_save_area_addr = (__u32)
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
/* enable extended save area */
- ctl_set_bit(14, 29);
+ __ctl_set_bit(14, 29);
}
#endif
set_prefix((u32)(unsigned long) lc);
@@ -478,6 +494,7 @@
{
unsigned long bootmap_size;
unsigned long start_pfn, end_pfn, init_pfn;
+ unsigned long last_rw_end;
int i;
/*
@@ -533,27 +550,39 @@
/*
* Register RAM areas with the bootmem allocator.
*/
+ last_rw_end = start_pfn;
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
- unsigned long start_chunk, end_chunk, pfn;
+ unsigned long start_chunk, end_chunk;
if (memory_chunk[i].type != CHUNK_READ_WRITE)
continue;
- start_chunk = PFN_DOWN(memory_chunk[i].addr);
- end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1;
- end_chunk = min(end_chunk, end_pfn);
- if (start_chunk >= end_chunk)
- continue;
- add_active_range(0, start_chunk, end_chunk);
- pfn = max(start_chunk, start_pfn);
- for (; pfn <= end_chunk; pfn++)
- page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY);
+ start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1);
+ start_chunk >>= PAGE_SHIFT;
+ end_chunk = (memory_chunk[i].addr + memory_chunk[i].size);
+ end_chunk >>= PAGE_SHIFT;
+ if (start_chunk < start_pfn)
+ start_chunk = start_pfn;
+ if (end_chunk > end_pfn)
+ end_chunk = end_pfn;
+ if (start_chunk < end_chunk) {
+ /* Initialize storage key for RAM pages */
+ for (init_pfn = start_chunk ; init_pfn < end_chunk;
+ init_pfn++)
+ page_set_storage_key(init_pfn << PAGE_SHIFT,
+ PAGE_DEFAULT_KEY);
+ free_bootmem(start_chunk << PAGE_SHIFT,
+ (end_chunk - start_chunk) << PAGE_SHIFT);
+ if (last_rw_end < start_chunk)
+ add_memory_hole(last_rw_end, start_chunk - 1);
+ last_rw_end = end_chunk;
+ }
}
psw_set_key(PAGE_DEFAULT_KEY);
- free_bootmem_with_active_regions(0, max_pfn);
- reserve_bootmem(0, PFN_PHYS(start_pfn));
+ if (last_rw_end < end_pfn - 1)
+ add_memory_hole(last_rw_end, end_pfn - 1);
/*
* Reserve the bootmem bitmap itself as well. We do this in two
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index d998917..e1881c3 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -84,6 +84,7 @@
printk("%d pages swap cached\n",cached);
}
+extern unsigned long __initdata zholes_size[];
/*
* paging_init() sets up the page tables
*/
@@ -100,15 +101,16 @@
unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE;
static const int ssm_mask = 0x04000000L;
unsigned long ro_start_pfn, ro_end_pfn;
- unsigned long max_zone_pfns[MAX_NR_ZONES];
+ unsigned long zones_size[MAX_NR_ZONES];
ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_DMA] = max_low_pfn;
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- free_area_init_nodes(max_zone_pfns);
+ memset(zones_size, 0, sizeof(zones_size));
+ zones_size[ZONE_DMA] = max_low_pfn;
+ free_area_init_node(0, &contig_page_data, zones_size,
+ __pa(PAGE_OFFSET) >> PAGE_SHIFT,
+ zholes_size);
/* unmap whole virtual address space */
@@ -168,16 +170,26 @@
unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) |
_KERN_REGION_TABLE;
static const int ssm_mask = 0x04000000L;
+ unsigned long zones_size[MAX_NR_ZONES];
+ unsigned long dma_pfn, high_pfn;
unsigned long ro_start_pfn, ro_end_pfn;
- unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(zones_size, 0, sizeof(zones_size));
+ dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
+ high_pfn = max_low_pfn;
ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- free_area_init_nodes(max_zone_pfns);
+ if (dma_pfn > high_pfn)
+ zones_size[ZONE_DMA] = high_pfn;
+ else {
+ zones_size[ZONE_DMA] = dma_pfn;
+ zones_size[ZONE_NORMAL] = high_pfn - dma_pfn;
+ }
+
+ /* Initialize mem_map[]. */
+ free_area_init_node(0, &contig_page_data, zones_size,
+ __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
/*
* map whole physical memory to virtual memory (identity mapping)
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index a4edff4..831f540 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -32,13 +32,12 @@
#include <asm/mxcc.h>
#include <asm/thread_info.h>
#include <asm/param.h>
+#include <asm/unistd.h>
#include <asm/asmmacro.h>
#define curptr g6
-#define NR_SYSCALLS 300 /* Each OS is different... */
-
/* These are just handy. */
#define _SV save %sp, -STACKFRAME_SZ, %sp
#define _RS restore
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 10df38e..ea75ca5 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -78,7 +78,7 @@
/*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
-/*300*/ .long sys_set_robust_list, sys_get_robust_list
+/*300*/ .long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages
#ifdef CONFIG_SUNOS_EMUL
/* Now the SunOS syscall table. */
@@ -190,6 +190,7 @@
/*290*/ .long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
- .long sunos_nosys, sunos_nosys, sunos_nosys
+ .long sunos_nosys
+/*300*/ .long sunos_nosys, sunos_nosys, sunos_nosys
#endif
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 0aaa35f..6f28bec 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -22,11 +22,10 @@
#include <asm/auxio.h>
#include <asm/sfafsr.h>
#include <asm/pil.h>
+#include <asm/unistd.h>
#define curptr g6
-#define NR_SYSCALLS 300 /* Each OS is different... */
-
.text
.align 32
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 419a63f..9a80267 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -79,7 +79,7 @@
.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
-/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list
+/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages
#endif /* CONFIG_COMPAT */
@@ -149,7 +149,7 @@
.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
-/*300*/ .word sys_set_robust_list, sys_get_robust_list
+/*300*/ .word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -262,5 +262,7 @@
/*290*/ .word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
- .word sunos_nosys, sunos_nosys, sunos_nosys
+ .word sunos_nosys
+/*300*/ .word sunos_nosys, sunos_nosys, sunos_nosys
+
#endif
diff --git a/arch/um/include/sysdep-i386/barrier.h b/arch/um/include/sysdep-i386/barrier.h
new file mode 100644
index 0000000..b58d52c
--- /dev/null
+++ b/arch/um/include/sysdep-i386/barrier.h
@@ -0,0 +1,9 @@
+#ifndef __SYSDEP_I386_BARRIER_H
+#define __SYSDEP_I386_BARRIER_H
+
+/* Copied from include/asm-i386 for use by userspace. i386 has the option
+ * of using mfence, but I'm just using this, which works everywhere, for now.
+ */
+#define mb() asm volatile("lock; addl $0,0(%esp)")
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/barrier.h b/arch/um/include/sysdep-x86_64/barrier.h
new file mode 100644
index 0000000..7b610be
--- /dev/null
+++ b/arch/um/include/sysdep-x86_64/barrier.h
@@ -0,0 +1,7 @@
+#ifndef __SYSDEP_X86_64_BARRIER_H
+#define __SYSDEP_X86_64_BARRIER_H
+
+/* Copied from include/asm-x86_64 for use by userspace. */
+#define mb() asm volatile("mfence":::"memory")
+
+#endif
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 51f0893..c692a19 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -7,7 +7,6 @@
#include <stdio.h>
#include <errno.h>
#include <signal.h>
-#include <linux/unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <sys/mman.h>
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 6b81739..b897e85 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -15,6 +15,7 @@
#include "user.h"
#include "signal_kern.h"
#include "sysdep/sigcontext.h"
+#include "sysdep/barrier.h"
#include "sigcontext.h"
#include "mode.h"
#include "os.h"
@@ -34,8 +35,12 @@
#define SIGALRM_BIT 2
#define SIGALRM_MASK (1 << SIGALRM_BIT)
-static int signals_enabled = 1;
-static int pending = 0;
+/* These are used by both the signal handlers and
+ * block/unblock_signals. I don't want modifications cached in a
+ * register - they must go straight to memory.
+ */
+static volatile int signals_enabled = 1;
+static volatile int pending = 0;
void sig_handler(int sig, struct sigcontext *sc)
{
@@ -152,6 +157,12 @@
void block_signals(void)
{
signals_enabled = 0;
+ /* This must return with signals disabled, so this barrier
+ * ensures that writes are flushed out before the return.
+ * This might matter if gcc figures out how to inline this and
+ * decides to shuffle this code into the caller.
+ */
+ mb();
}
void unblock_signals(void)
@@ -171,9 +182,23 @@
*/
signals_enabled = 1;
+ /* Setting signals_enabled and reading pending must
+ * happen in this order.
+ */
+ mb();
+
save_pending = pending;
- if(save_pending == 0)
+ if(save_pending == 0){
+ /* This must return with signals enabled, so
+ * this barrier ensures that writes are
+ * flushed out before the return. This might
+ * matter if gcc figures out how to inline
+ * this (unlikely, given its size) and decides
+ * to shuffle this code into the caller.
+ */
+ mb();
return;
+ }
pending = 0;
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index cb9ab54..9b34fe6 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -14,7 +14,7 @@
#include <sys/mman.h>
#include <sys/user.h>
#include <sys/time.h>
-#include <asm/unistd.h>
+#include <sys/syscall.h>
#include <asm/types.h>
#include "user.h"
#include "sysdep/ptrace.h"
diff --git a/arch/um/os-Linux/tls.c b/arch/um/os-Linux/tls.c
index 9f7999f..16215b9 100644
--- a/arch/um/os-Linux/tls.c
+++ b/arch/um/os-Linux/tls.c
@@ -1,7 +1,7 @@
#include <errno.h>
+#include <unistd.h>
#include <sys/ptrace.h>
#include <sys/syscall.h>
-#include <unistd.h>
#include <asm/ldt.h>
#include "sysdep/tls.h"
#include "uml-config.h"
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index c7b1dac..9eaee66 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3075,11 +3075,12 @@
if (maxsector) {
sector_t sector = bio->bi_sector;
- if (maxsector < nr_sectors || maxsector - nr_sectors < sector) {
+ if (maxsector < nr_sectors ||
+ maxsector - nr_sectors < sector) {
/*
- * This may well happen - partitions are not checked
- * to make sure they are within the size of the
- * whole device.
+ * This may well happen - partitions are not
+ * checked to make sure they are within the size
+ * of the whole device.
*/
handle_bad_sector(bio);
goto end_io;
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e5cfb1f..157fa81 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1867,7 +1867,7 @@
static struct pci_device_id ipmi_pci_devices[] = {
{ PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
- { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) }
+ { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) }
};
MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 4bde30b..75e9e38 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -230,34 +230,43 @@
*/
static int edac_sysfs_memctrl_setup(void)
{
- int err=0;
+ int err = 0;
debugf1("%s()\n", __func__);
/* create the /sys/devices/system/edac directory */
err = sysdev_class_register(&edac_class);
- if (!err) {
- /* Init the MC's kobject */
- memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj));
- edac_memctrl_kobj.parent = &edac_class.kset.kobj;
- edac_memctrl_kobj.ktype = &ktype_memctrl;
-
- /* generate sysfs "..../edac/mc" */
- err = kobject_set_name(&edac_memctrl_kobj,"mc");
-
- if (!err) {
- /* FIXME: maybe new sysdev_create_subdir() */
- err = kobject_register(&edac_memctrl_kobj);
-
- if (err)
- debugf1("Failed to register '.../edac/mc'\n");
- else
- debugf1("Registered '.../edac/mc' kobject\n");
- }
- } else
+ if (err) {
debugf1("%s() error=%d\n", __func__, err);
+ return err;
+ }
+ /* Init the MC's kobject */
+ memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj));
+ edac_memctrl_kobj.parent = &edac_class.kset.kobj;
+ edac_memctrl_kobj.ktype = &ktype_memctrl;
+
+ /* generate sysfs "..../edac/mc" */
+ err = kobject_set_name(&edac_memctrl_kobj,"mc");
+
+ if (err)
+ goto fail;
+
+ /* FIXME: maybe new sysdev_create_subdir() */
+ err = kobject_register(&edac_memctrl_kobj);
+
+ if (err) {
+ debugf1("Failed to register '.../edac/mc'\n");
+ goto fail;
+ }
+
+ debugf1("Registered '.../edac/mc' kobject\n");
+
+ return 0;
+
+fail:
+ sysdev_class_unregister(&edac_class);
return err;
}
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 2b0ea8b..753fe0e 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -75,6 +75,7 @@
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 },
{ 0 }
};
@@ -491,7 +492,8 @@
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
- /* 19 */ DECLARE_AMD_DEV("AMD5536"),
+ /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
+ /* 20 */ DECLARE_AMD_DEV("AMD5536"),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -530,7 +532,8 @@
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 },
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index d8d256d..5800beee 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -616,7 +616,7 @@
} else if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
skb_reserve(bcs->skb, HW_HDR_LEN);
else {
- gig_dbg(DEBUG_INIT, "could not allocate skb\n");
+ warn("could not allocate skb\n");
bcs->inputstate |= INS_skip_frame;
}
diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c
index 1fadf01..1875877 100644
--- a/drivers/isdn/hysdn/hysdn_sched.c
+++ b/drivers/isdn/hysdn/hysdn_sched.c
@@ -155,21 +155,17 @@
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
- spin_lock_irqsave(&card->hysdn_lock, flags);
while (card->async_busy) {
- sti();
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg delayed");
msleep_interruptible(20); /* Timeout 20ms */
- if (!--cnt) {
- spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ if (!--cnt)
return (-ERR_ASYNC_TIME); /* timed out */
- }
- cli();
} /* wait for buffer to become free */
+ spin_lock_irqsave(&card->hysdn_lock, flags);
strcpy(card->async_data, line);
card->async_len = strlen(line) + 1;
card->async_channel = chan;
@@ -177,30 +173,23 @@
/* now queue the task */
schedule_work(&card->irq_queue);
- sti();
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg data queued");
cnt++; /* short delay */
- cli();
while (card->async_busy) {
- sti();
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
msleep_interruptible(20); /* Timeout 20ms */
- if (!--cnt) {
- spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ if (!--cnt)
return (-ERR_ASYNC_TIME); /* timed out */
- }
- cli();
} /* wait for buffer to become free again */
- spin_unlock_irqrestore(&card->hysdn_lock, flags);
-
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg data send");
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 50ab4a9..d111356 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3200,6 +3200,7 @@
mddev->changed = 1;
md_new_event(mddev);
+ kobject_uevent(&mddev->gendisk->kobj, KOBJ_ONLINE);
return 0;
}
@@ -3313,6 +3314,7 @@
module_put(mddev->pers->owner);
mddev->pers = NULL;
+ kobject_uevent(&mddev->gendisk->kobj, KOBJ_OFFLINE);
if (mddev->ro)
mddev->ro = 0;
}
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index bbdba7b..db9d7df 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -44,12 +44,14 @@
*/
#include <linux/kernel.h>
+#include <linux/fs.h>
#include <linux/module.h>
+#include <linux/buffer_head.h>
#include <linux/kprobes.h>
-#include <linux/kallsyms.h>
+#include <linux/list.h>
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
#include <scsi/scsi_cmnd.h>
#ifdef CONFIG_IDE
@@ -116,16 +118,16 @@
static int count = DEFAULT_COUNT;
module_param(recur_count, int, 0644);
-MODULE_PARM_DESC(recur_count, "Recurcion level for the stack overflow test,\
- default is 10");
+MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\
+ "default is 10");
module_param(cpoint_name, charp, 0644);
-MODULE_PARM_DESC(cpoint_name, "Crash Point, where kernel is to be crashed");
-module_param(cpoint_type, charp, 06444);
-MODULE_PARM_DESC(cpoint_type, "Crash Point Type, action to be taken on\
- hitting the crash point");
-module_param(cpoint_count, int, 06444);
-MODULE_PARM_DESC(cpoint_count, "Crash Point Count, number of times the \
- crash point is to be hit to trigger action");
+MODULE_PARM_DESC(cpoint_name, " Crash Point, where kernel is to be crashed");
+module_param(cpoint_type, charp, 0644);
+MODULE_PARM_DESC(cpoint_type, " Crash Point Type, action to be taken on "\
+ "hitting the crash point");
+module_param(cpoint_count, int, 0644);
+MODULE_PARM_DESC(cpoint_count, " Crash Point Count, number of times the "\
+ "crash point is to be hit to trigger action");
unsigned int jp_do_irq(unsigned int irq)
{
@@ -155,8 +157,8 @@
struct scan_control;
-unsigned long jp_shrink_page_list(struct list_head *page_list,
- struct scan_control *sc)
+unsigned long jp_shrink_inactive_list(unsigned long max_scan,
+ struct zone *zone, struct scan_control *sc)
{
lkdtm_handler();
jprobe_return();
@@ -295,8 +297,8 @@
lkdtm.entry = (kprobe_opcode_t*) jp_ll_rw_block;
break;
case MEM_SWAPOUT:
- lkdtm.kp.symbol_name = "shrink_page_list";
- lkdtm.entry = (kprobe_opcode_t*) jp_shrink_page_list;
+ lkdtm.kp.symbol_name = "shrink_inactive_list";
+ lkdtm.entry = (kprobe_opcode_t*) jp_shrink_inactive_list;
break;
case TIMERADD:
lkdtm.kp.symbol_name = "hrtimer_start";
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 28c17d1..9cb3ca5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -486,7 +486,7 @@
config MIPS_SIM_NET
tristate "MIPS simulator Network device (EXPERIMENTAL)"
- depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL
+ depends on MIPS_SIM && EXPERIMENTAL
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
@@ -2467,7 +2467,7 @@
config RIONET
tristate "RapidIO Ethernet over messaging driver support"
- depends on NETDEVICES && RAPIDIO
+ depends on RAPIDIO
config RIONET_TX_SIZE
int "Number of outbound queue entries"
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index b40724f..39ad9f7 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -39,7 +39,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0034"
+#define DRV_VERSION "EHEA_0043"
#define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
@@ -105,9 +105,6 @@
#define EHEA_BCMC_VLANID_ALL 0x01
#define EHEA_BCMC_VLANID_SINGLE 0x00
-/* Use this define to kmallocate pHYP control blocks */
-#define H_CB_ALIGNMENT 4096
-
#define EHEA_CACHE_LINE 128
/* Memory Regions */
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 82eb2fb..9f57c2e 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -238,7 +238,7 @@
data[i++] = port->port_res[0].swqe_refill_th;
data[i++] = port->resets;
- cb6 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb6 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb6) {
ehea_error("no mem for cb6");
return;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 4538c99..6ad6961 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -92,7 +92,7 @@
memset(stats, 0, sizeof(*stats));
- cb2 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb2) {
ehea_error("no mem for cb2");
goto out;
@@ -586,8 +586,8 @@
u64 hret;
struct hcp_ehea_port_cb0 *cb0;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); /* May be called via */
- if (!cb0) { /* ehea_neq_tasklet() */
+ cb0 = kzalloc(PAGE_SIZE, GFP_ATOMIC); /* May be called via */
+ if (!cb0) { /* ehea_neq_tasklet() */
ehea_error("no mem for cb0");
ret = -ENOMEM;
goto out;
@@ -670,7 +670,7 @@
u64 hret;
int ret = 0;
- cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb4) {
ehea_error("no mem for cb4");
ret = -ENOMEM;
@@ -985,7 +985,7 @@
struct hcp_ehea_port_cb0 *cb0;
ret = -ENOMEM;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0)
goto out;
@@ -1443,7 +1443,7 @@
goto out;
}
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0) {
ehea_error("no mem for cb0");
ret = -ENOMEM;
@@ -1501,7 +1501,7 @@
if ((enable && port->promisc) || (!enable && !port->promisc))
return;
- cb7 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC);
+ cb7 = kzalloc(PAGE_SIZE, GFP_ATOMIC);
if (!cb7) {
ehea_error("no mem for cb7");
goto out;
@@ -1870,7 +1870,7 @@
port->vgrp = grp;
- cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
@@ -1899,7 +1899,7 @@
int index;
u64 hret;
- cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
@@ -1935,7 +1935,7 @@
if (port->vgrp)
port->vgrp->vlan_devices[vid] = NULL;
- cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
@@ -1968,7 +1968,7 @@
u64 dummy64 = 0;
struct hcp_modify_qp_cb0* cb0;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0) {
ret = -ENOMEM;
goto out;
@@ -2269,7 +2269,7 @@
u64 hret;
int ret;
- cb = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb) {
ret = -ENOMEM;
goto out;
@@ -2340,7 +2340,7 @@
goto out;
/* Enable Jumbo frames */
- cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb4) {
ehea_error("no mem for cb4");
} else {
diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ehea/ehea_phyp.c
index 0b51a8c..0cfc2bc 100644
--- a/drivers/net/ehea/ehea_phyp.c
+++ b/drivers/net/ehea/ehea_phyp.c
@@ -506,7 +506,7 @@
const u8 pagesize, const u8 queue_type,
const u64 log_pageaddr, const u64 count)
{
- if ((count > 1) && (log_pageaddr & 0xfff)) {
+ if ((count > 1) && (log_pageaddr & ~PAGE_MASK)) {
ehea_error("not on pageboundary");
return H_PARAMETER;
}
diff --git a/drivers/net/ehea/ehea_phyp.h b/drivers/net/ehea/ehea_phyp.h
index fa51e3b..919f94b 100644
--- a/drivers/net/ehea/ehea_phyp.h
+++ b/drivers/net/ehea/ehea_phyp.h
@@ -81,14 +81,16 @@
static inline void hcp_epas_ctor(struct h_epas *epas, u64 paddr_kernel,
u64 paddr_user)
{
- epas->kernel.addr = ioremap(paddr_kernel, PAGE_SIZE);
+ /* To support 64k pages we must round to 64k page boundary */
+ epas->kernel.addr = ioremap((paddr_kernel & PAGE_MASK), PAGE_SIZE) +
+ (paddr_kernel & ~PAGE_MASK);
epas->user.addr = paddr_user;
}
static inline void hcp_epas_dtor(struct h_epas *epas)
{
if (epas->kernel.addr)
- iounmap(epas->kernel.addr);
+ iounmap((void __iomem*)((u64)epas->kernel.addr & PAGE_MASK));
epas->user.addr = 0;
epas->kernel.addr = 0;
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 3e18623..72ef7bd 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -209,11 +209,11 @@
{
u64 adapter_handle, hret;
- adapter_handle = cq->adapter->handle;
-
if (!cq)
return 0;
+ adapter_handle = cq->adapter->handle;
+
/* deregister all previous registered pages */
hret = ehea_h_free_resource(adapter_handle, cq->fw_handle);
if (hret != H_SUCCESS) {
@@ -512,7 +512,7 @@
start = KERNELBASE;
end = (u64)high_memory;
- nr_pages = (end - start) / PAGE_SIZE;
+ nr_pages = (end - start) / EHEA_PAGESIZE;
pt = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!pt) {
@@ -538,9 +538,9 @@
if (nr_pages > 1) {
u64 num_pages = min(nr_pages, (u64)512);
for (i = 0; i < num_pages; i++)
- pt[i] = virt_to_abs((void*)(((u64)start)
- + ((k++) *
- PAGE_SIZE)));
+ pt[i] = virt_to_abs((void*)(((u64)start) +
+ ((k++) *
+ EHEA_PAGESIZE)));
hret = ehea_h_register_rpage_mr(adapter->handle,
adapter->mr.handle, 0,
@@ -548,8 +548,9 @@
num_pages);
nr_pages -= num_pages;
} else {
- u64 abs_adr = virt_to_abs((void*)(((u64)start)
- + (k * PAGE_SIZE)));
+ u64 abs_adr = virt_to_abs((void*)(((u64)start) +
+ (k * EHEA_PAGESIZE)));
+
hret = ehea_h_register_rpage_mr(adapter->handle,
adapter->mr.handle, 0,
0, abs_adr,1);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 8e39849..8f059b7 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.67"
-#define DRV_MODULE_RELDATE "October 18, 2006"
+#define DRV_MODULE_VERSION "3.68"
+#define DRV_MODULE_RELDATE "November 02, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -6014,7 +6014,7 @@
tg3_abort_hw(tp, 1);
}
- if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy)
+ if (reset_phy)
tg3_phy_reset(tp);
err = tg3_chip_reset(tp);
@@ -6574,7 +6574,7 @@
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
}
- err = tg3_setup_phy(tp, reset_phy);
+ err = tg3_setup_phy(tp, 0);
if (err)
return err;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
index 2ddbec6..7d383a2 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
@@ -189,20 +189,24 @@
case BCM43xx_LED_INACTIVE:
continue;
case BCM43xx_LED_OFF:
+ case BCM43xx_LED_BCM4303_3:
break;
case BCM43xx_LED_ON:
turn_on = 1;
break;
case BCM43xx_LED_ACTIVITY:
+ case BCM43xx_LED_BCM4303_0:
turn_on = activity;
break;
case BCM43xx_LED_RADIO_ALL:
turn_on = radio->enabled;
break;
case BCM43xx_LED_RADIO_A:
+ case BCM43xx_LED_BCM4303_2:
turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
break;
case BCM43xx_LED_RADIO_B:
+ case BCM43xx_LED_BCM4303_1:
turn_on = (radio->enabled &&
(phy->type == BCM43xx_PHYTYPE_B ||
phy->type == BCM43xx_PHYTYPE_G));
@@ -257,7 +261,8 @@
continue;
#endif /* CONFIG_BCM43XX_DEBUG */
default:
- assert(0);
+ dprintkl(KERN_INFO PFX "Bad value in leds_update,"
+ " led->behaviour: 0x%x\n", led->behaviour);
};
if (led->activelow)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
index d3716cf..811e14a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
@@ -46,6 +46,12 @@
BCM43xx_LED_TEST_BLINKSLOW,
BCM43xx_LED_TEST_BLINKMEDIUM,
BCM43xx_LED_TEST_BLINKFAST,
+
+ /* Misc values for BCM4303 */
+ BCM43xx_LED_BCM4303_0 = 0x2B,
+ BCM43xx_LED_BCM4303_1 = 0x78,
+ BCM43xx_LED_BCM4303_2 = 0x2E,
+ BCM43xx_LED_BCM4303_3 = 0x19,
};
int bcm43xx_leds_init(struct bcm43xx_private *bcm);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index a94c6d8..65edb56 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3163,9 +3163,11 @@
static void bcm43xx_periodic_work_handler(void *d)
{
struct bcm43xx_private *bcm = d;
+ struct net_device *net_dev = bcm->net_dev;
unsigned long flags;
u32 savedirqs = 0;
int badness;
+ unsigned long orig_trans_start = 0;
mutex_lock(&bcm->mutex);
badness = estimate_periodic_work_badness(bcm->periodic_state);
@@ -3173,7 +3175,18 @@
/* Periodic work will take a long time, so we want it to
* be preemtible.
*/
- netif_tx_disable(bcm->net_dev);
+
+ netif_tx_lock_bh(net_dev);
+ /* We must fake a started transmission here, as we are going to
+ * disable TX. If we wouldn't fake a TX, it would be possible to
+ * trigger the netdev watchdog, if the last real TX is already
+ * some time on the past (slightly less than 5secs)
+ */
+ orig_trans_start = net_dev->trans_start;
+ net_dev->trans_start = jiffies;
+ netif_stop_queue(net_dev);
+ netif_tx_unlock_bh(net_dev);
+
spin_lock_irqsave(&bcm->irq_lock, flags);
bcm43xx_mac_suspend(bcm);
if (bcm43xx_using_pio(bcm))
@@ -3198,6 +3211,7 @@
bcm43xx_pio_thaw_txqueues(bcm);
bcm43xx_mac_enable(bcm);
netif_wake_queue(bcm->net_dev);
+ net_dev->trans_start = orig_trans_start;
}
mmiowb();
spin_unlock_irqrestore(&bcm->irq_lock, flags);
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 6dfa041..bc81b13 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -364,7 +364,7 @@
pos = 0;
while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) {
- if (pos + cis[pos + 1] >= CIS_MAX_LEN)
+ if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN)
goto cis_error;
switch (cis[pos]) {
@@ -391,7 +391,7 @@
break;
case CISTPL_MANFID:
- if (cis[pos + 1] < 5)
+ if (cis[pos + 1] < 4)
goto cis_error;
manfid1 = cis[pos + 2] + (cis[pos + 3] << 8);
manfid2 = cis[pos + 4] + (cis[pos + 5] << 8);
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index ecc50db..5f1b9f5 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -19,7 +19,7 @@
config PCI_MULTITHREAD_PROBE
bool "PCI Multi-threaded probe (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL && BROKEN
help
Say Y here if you want the PCI core to spawn a new thread for
every PCI device that is probed. This can cause a huge
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 146298a..c3c0626 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -281,7 +281,6 @@
up(&board_lock);
return 0;
}
-EXPORT_SYMBOL_GPL(spi_register_board_info);
/* FIXME someone should add support for a __setup("spi", ...) that
* creates board info from kernel command lines
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 809d465..6303970 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -722,6 +722,7 @@
usblp->wcomplete = 0;
err = usb_submit_urb(usblp->writeurb, GFP_KERNEL);
if (err) {
+ usblp->wcomplete = 1;
if (err != -ENOMEM)
count = -EIO;
else
@@ -1202,8 +1203,6 @@
down (&usblp->sem);
/* we take no more IO */
usblp->sleeping = 1;
- /* we wait for anything printing */
- wait_event (usblp->wait, usblp->wcomplete || !usblp->present);
usblp_unlink_urbs(usblp);
up (&usblp->sem);
mutex_unlock (&usblp_mutex);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 66bff18..ba165af 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1188,6 +1188,7 @@
#ifdef CONFIG_USB_OTG
#include "otg_whitelist.h"
+static int __usb_port_suspend(struct usb_device *, int port1);
#endif
/**
@@ -1289,8 +1290,6 @@
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_port_suspend(struct usb_device *,
- int port1);
err = __usb_port_suspend(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 45f44fe..6daf85c 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -270,7 +270,7 @@
* Read data value from item.
*/
-static __inline__ __u32 item_udata(struct hid_item *item)
+static u32 item_udata(struct hid_item *item)
{
switch (item->size) {
case 1: return item->data.u8;
@@ -280,7 +280,7 @@
return 0;
}
-static __inline__ __s32 item_sdata(struct hid_item *item)
+static s32 item_sdata(struct hid_item *item)
{
switch (item->size) {
case 1: return item->data.s8;
@@ -727,7 +727,7 @@
* done by hand.
*/
-static __inline__ __s32 snto32(__u32 value, unsigned n)
+static s32 snto32(__u32 value, unsigned n)
{
switch (n) {
case 8: return ((__s8)value);
@@ -741,9 +741,9 @@
* Convert a signed 32-bit integer to a signed n-bit integer.
*/
-static __inline__ __u32 s32ton(__s32 value, unsigned n)
+static u32 s32ton(__s32 value, unsigned n)
{
- __s32 a = value >> (n - 1);
+ s32 a = value >> (n - 1);
if (a && a != -1)
return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1;
return value & ((1 << n) - 1);
@@ -751,30 +751,55 @@
/*
* Extract/implement a data field from/to a little endian report (bit array).
+ *
+ * Code sort-of follows HID spec:
+ * http://www.usb.org/developers/devclass_docs/HID1_11.pdf
+ *
+ * While the USB HID spec allows unlimited length bit fields in "report
+ * descriptors", most devices never use more than 16 bits.
+ * One model of UPS is claimed to report "LINEV" as a 32-bit field.
+ * Search linux-kernel and linux-usb-devel archives for "hid-core extract".
*/
static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
{
- u32 x;
+ u64 x;
+
+ WARN_ON(n > 32);
report += offset >> 3; /* adjust byte index */
- offset &= 8 - 1;
- x = get_unaligned((u32 *) report);
- x = le32_to_cpu(x);
- x = (x >> offset) & ((1 << n) - 1);
- return x;
+ offset &= 7; /* now only need bit offset into one byte */
+ x = get_unaligned((u64 *) report);
+ x = le64_to_cpu(x);
+ x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */
+ return (u32) x;
}
+/*
+ * "implement" : set bits in a little endian bit stream.
+ * Same concepts as "extract" (see comments above).
+ * The data mangled in the bit stream remains in little endian
+ * order the whole time. It make more sense to talk about
+ * endianness of register values by considering a register
+ * a "cached" copy of the little endiad bit stream.
+ */
static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
{
- u32 x;
+ u64 x;
+ u64 m = (1ULL << n) - 1;
+
+ WARN_ON(n > 32);
+
+ WARN_ON(value > m);
+ value &= m;
report += offset >> 3;
- offset &= 8 - 1;
- x = get_unaligned((u32 *)report);
- x &= cpu_to_le32(~((((__u32) 1 << n) - 1) << offset));
- x |= cpu_to_le32(value << offset);
- put_unaligned(x,(u32 *)report);
+ offset &= 7;
+
+ x = get_unaligned((u64 *)report);
+ x &= cpu_to_le64(~(m << offset));
+ x |= cpu_to_le64(((u64) value) << offset);
+ put_unaligned(x, (u64 *) report);
}
/*
@@ -1615,6 +1640,9 @@
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
+#define USB_VENDOR_ID_AIRCABLE 0x16CA
+#define USB_DEVICE_ID_AIRCABLE1 0x1502
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -1632,6 +1660,7 @@
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 2902742..933cedd 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -640,7 +640,7 @@
type->max_press, 0, 0);
usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
- usb_rcvintpipe(usbtouch->udev, 0x81),
+ usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index 6a12a94..df97e5c 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -2,6 +2,10 @@
* X-Box gamepad - v0.0.6
*
* Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
+ * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
+ * Steven Toth <steve@toth.demon.co.uk>,
+ * Franz Lehner <franz@caos.at>,
+ * Ivan Hawkes <blackhawk@ivanhawkes.com>
* 2005 Dominic Cerquetti <binary1230@yahoo.com>
* 2006 Adam Buchbinder <adam.buchbinder@gmail.com>
*
@@ -29,6 +33,7 @@
* - ITO Takayuki for providing essential xpad information on his website
* - Vojtech Pavlik - iforce driver / input subsystem
* - Greg Kroah-Hartman - usb-skeleton driver
+ * - XBOX Linux project - extra USB id's
*
* TODO:
* - fine tune axes (especially trigger axes)
@@ -54,6 +59,13 @@
* - fixed d-pad to axes mapping
*
* 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ * - borrowed from the XBOX linux kernel
+ * - USB id's for commonly used dance pads are present
+ * - dance pads will map D-PAD to buttons, not axes
+ * - pass the module paramater 'dpad_to_buttons' to force
+ * the D-PAD to map to buttons if your pad is not detected
*/
#include <linux/kernel.h>
@@ -90,8 +102,35 @@
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
- { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
+ { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
+ { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
+ { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
+ { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
+ { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
};
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 454a186..e081836 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -92,8 +92,13 @@
To compile this driver as a module, choose M here: the
module will be called rtl8150.
+config USB_USBNET_MII
+ tristate
+ default n
+
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
+ select MII if USBNET_MII != n
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
@@ -129,7 +134,7 @@
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
depends on USB_USBNET && NET_ETHERNET
select CRC32
- select MII
+ select USB_USBNET_MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
@@ -210,6 +215,7 @@
config USB_NET_MCS7830
tristate "MosChip MCS7830 based Ethernet adapters"
depends on USB_USBNET
+ select USB_USBNET_MII
help
Choose this option if you're using a 10/100 Ethernet USB2
adapter based on the MosChip 7830 controller. This includes
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 4087363..760b532 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -669,6 +669,9 @@
* they'll probably want to use this base set.
*/
+#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
+#define HAVE_MII
+
int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
@@ -699,20 +702,6 @@
}
EXPORT_SYMBOL_GPL(usbnet_set_settings);
-
-void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
-{
- struct usbnet *dev = netdev_priv(net);
-
- /* REVISIT don't always return "usbnet" */
- strncpy (info->driver, driver_name, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- strncpy (info->fw_version, dev->driver_info->description,
- sizeof info->fw_version);
- usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
-}
-EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
-
u32 usbnet_get_link (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -730,6 +719,32 @@
}
EXPORT_SYMBOL_GPL(usbnet_get_link);
+int usbnet_nway_reset(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!dev->mii.mdio_write)
+ return -EOPNOTSUPP;
+
+ return mii_nway_restart(&dev->mii);
+}
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+
+#endif /* HAVE_MII */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ /* REVISIT don't always return "usbnet" */
+ strncpy (info->driver, driver_name, sizeof info->driver);
+ strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strncpy (info->fw_version, dev->driver_info->description,
+ sizeof info->fw_version);
+ usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
+
u32 usbnet_get_msglevel (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -746,24 +761,15 @@
}
EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
-int usbnet_nway_reset(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
-
- if (!dev->mii.mdio_write)
- return -EOPNOTSUPP;
-
- return mii_nway_restart(&dev->mii);
-}
-EXPORT_SYMBOL_GPL(usbnet_nway_reset);
-
/* drivers may override default ethtool_ops in their bind() routine */
static struct ethtool_ops usbnet_ethtool_ops = {
+#ifdef HAVE_MII
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
- .get_drvinfo = usbnet_get_drvinfo,
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
+#endif
+ .get_drvinfo = usbnet_get_drvinfo,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
};
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9a6ec1b..2a8dd4c 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -54,10 +54,10 @@
properly.
config USB_SERIAL_AIRCABLE
- tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)"
+ tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
help
- Say Y here if you want to use AIRcable USB Bluetoot Dongle.
+ Say Y here if you want to use USB AIRcable Bluetooth Dongle.
To compile this driver as a module, choose M here: the module
will be called aircable.
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index bbf6532..f95d42c 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -64,6 +64,9 @@
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ea16572..4b5097f 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -35,6 +35,7 @@
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
@@ -58,8 +59,10 @@
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ }
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 37ed8e0..bc1ac07 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1236,7 +1236,7 @@
"Cowon Systems",
"iAUDIO M5",
US_SC_DEVICE, US_PR_BULK, NULL,
- 0 ),
+ US_FL_NEED_OVERRIDE ),
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
@@ -1313,6 +1313,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Jan Mate <mate@fiit.stuba.sk> */
+UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "P990i",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 976a691..7e056b9 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1806,13 +1806,6 @@
}
if ((rc < 0) || (smb_read_data == NULL)) {
cFYI(1, ("Read error in readpages: %d", rc));
- /* clean up remaing pages off list */
- while (!list_empty(page_list) && (i < num_pages)) {
- page = list_entry(page_list->prev, struct page,
- lru);
- list_del(&page->lru);
- page_cache_release(page);
- }
break;
} else if (bytes_read > 0) {
pSMBr = (struct smb_com_read_rsp *)smb_read_data;
@@ -1831,13 +1824,7 @@
this case is ok - if we are at server EOF
we will hit it on next read */
- /* while (!list_empty(page_list) && (i < num_pages)) {
- page = list_entry(page_list->prev,
- struct page, list);
- list_del(&page->list);
- page_cache_release(page);
- }
- break; */
+ /* break; */
}
} else {
cFYI(1, ("No bytes read (%d) at offset %lld . "
@@ -1845,14 +1832,6 @@
bytes_read, offset));
/* BB turn off caching and do new lookup on
file size at server? */
- while (!list_empty(page_list) && (i < num_pages)) {
- page = list_entry(page_list->prev, struct page,
- lru);
- list_del(&page->lru);
-
- /* BB removeme - replace with zero of page? */
- page_cache_release(page);
- }
break;
}
if (smb_read_data) {
diff --git a/fs/compat.c b/fs/compat.c
index 50624d4..8d0a001 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1835,9 +1835,12 @@
} while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
- if (ret == 0 && tsp && !(current->personality & STICKY_TIMEOUTS)) {
+ if (tsp) {
struct compat_timespec rts;
+ if (current->personality & STICKY_TIMEOUTS)
+ goto sticky;
+
rts.tv_sec = timeout / HZ;
rts.tv_nsec = (timeout % HZ) * (NSEC_PER_SEC/HZ);
if (rts.tv_nsec >= NSEC_PER_SEC) {
@@ -1846,8 +1849,19 @@
}
if (compat_timespec_compare(&rts, &ts) >= 0)
rts = ts;
- if (copy_to_user(tsp, &rts, sizeof(rts)))
- ret = -EFAULT;
+ if (copy_to_user(tsp, &rts, sizeof(rts))) {
+sticky:
+ /*
+ * If an application puts its timeval in read-only
+ * memory, we don't want the Linux-specific update to
+ * the timeval to cause a fault after the select has
+ * completed successfully. However, because we're not
+ * updating the timeval, we can't restart the system
+ * call.
+ */
+ if (ret == -ERESTARTNOHAND)
+ ret = -EINTR;
+ }
}
if (ret == -ERESTARTNOHAND) {
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index 109333c..f8842ca 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -43,6 +43,10 @@
ssize_t ret = len;
int n = simple_strtol(buf, NULL, 0);
+ ls = dlm_find_lockspace_local(ls->ls_local_handle);
+ if (!ls)
+ return -EINVAL;
+
switch (n) {
case 0:
dlm_ls_stop(ls);
@@ -53,6 +57,7 @@
default:
ret = -EINVAL;
}
+ dlm_put_lockspace(ls);
return ret;
}
@@ -143,6 +148,12 @@
return a->store ? a->store(ls, buf, len) : len;
}
+static void lockspace_kobj_release(struct kobject *k)
+{
+ struct dlm_ls *ls = container_of(k, struct dlm_ls, ls_kobj);
+ kfree(ls);
+}
+
static struct sysfs_ops dlm_attr_ops = {
.show = dlm_attr_show,
.store = dlm_attr_store,
@@ -151,6 +162,7 @@
static struct kobj_type dlm_ktype = {
.default_attrs = dlm_attrs,
.sysfs_ops = &dlm_attr_ops,
+ .release = lockspace_kobj_release,
};
static struct kset dlm_kset = {
@@ -678,7 +690,7 @@
dlm_clear_members_gone(ls);
kfree(ls->ls_node_array);
kobject_unregister(&ls->ls_kobj);
- kfree(ls);
+ /* The ls structure will be freed when the kobject is done with */
mutex_lock(&ls_lock);
ls_count--;
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index f49f105..136175a 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -134,7 +134,7 @@
algified_name_len = (chaining_modifier_len + cipher_name_len + 3);
(*algified_name) = kmalloc(algified_name_len, GFP_KERNEL);
- if (!(algified_name)) {
+ if (!(*algified_name)) {
rc = -ENOMEM;
goto out;
}
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 2bb5ace..763a50d 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -397,14 +397,14 @@
err = -EIO;
if (is_bad_inode(inode))
- goto clean_pages_up;
+ goto out;
data.file = file;
data.inode = inode;
data.req = fuse_get_req(fc);
err = PTR_ERR(data.req);
if (IS_ERR(data.req))
- goto clean_pages_up;
+ goto out;
err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
if (!err) {
@@ -413,10 +413,7 @@
else
fuse_put_request(fc, data.req);
}
- return err;
-
-clean_pages_up:
- put_pages_list(pages);
+out:
return err;
}
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 57c43ac..d470e52 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -157,6 +157,9 @@
struct gfs2_glock *io_gl;
int error;
+ if (!inode)
+ return ERR_PTR(-ENOBUFS);
+
if (inode->i_state & I_NEW) {
struct gfs2_sbd *sdp = GFS2_SB(inode);
umode_t mode = DT2IF(type);
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index 21508a1..9889c1e 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -84,8 +84,8 @@
gfs2_inode_cachep = kmem_cache_create("gfs2_inode",
sizeof(struct gfs2_inode),
- 0, (SLAB_RECLAIM_ACCOUNT|
- SLAB_PANIC|SLAB_MEM_SPREAD),
+ 0, SLAB_RECLAIM_ACCOUNT|
+ SLAB_MEM_SPREAD,
gfs2_init_inode_once, NULL);
if (!gfs2_inode_cachep)
goto fail;
diff --git a/fs/gfs2/ops_address.c b/fs/gfs2/ops_address.c
index 8d5963c..015640b 100644
--- a/fs/gfs2/ops_address.c
+++ b/fs/gfs2/ops_address.c
@@ -337,13 +337,6 @@
out_noerror:
ret = 0;
out_unlock:
- /* unlock all pages, we can't do any I/O right now */
- for (page_idx = 0; page_idx < nr_pages; page_idx++) {
- struct page *page = list_entry(pages->prev, struct page, lru);
- list_del(&page->lru);
- unlock_page(page);
- page_cache_release(page);
- }
if (do_unlock)
gfs2_holder_uninit(&gh);
goto out;
diff --git a/fs/gfs2/ops_super.c b/fs/gfs2/ops_super.c
index 06f06f7..b47d959 100644
--- a/fs/gfs2/ops_super.c
+++ b/fs/gfs2/ops_super.c
@@ -138,16 +138,27 @@
}
/**
- * gfs2_write_super - disk commit all incore transactions
- * @sb: the filesystem
+ * gfs2_write_super
+ * @sb: the superblock
*
- * This function is called every time sync(2) is called.
- * After this exits, all dirty buffers are synced.
*/
static void gfs2_write_super(struct super_block *sb)
{
+ sb->s_dirt = 0;
+}
+
+/**
+ * gfs2_sync_fs - sync the filesystem
+ * @sb: the superblock
+ *
+ * Flushes the log to disk.
+ */
+static int gfs2_sync_fs(struct super_block *sb, int wait)
+{
+ sb->s_dirt = 0;
gfs2_log_flush(sb->s_fs_info, NULL);
+ return 0;
}
/**
@@ -452,17 +463,18 @@
}
struct super_operations gfs2_super_ops = {
- .alloc_inode = gfs2_alloc_inode,
- .destroy_inode = gfs2_destroy_inode,
- .write_inode = gfs2_write_inode,
- .delete_inode = gfs2_delete_inode,
- .put_super = gfs2_put_super,
- .write_super = gfs2_write_super,
- .write_super_lockfs = gfs2_write_super_lockfs,
- .unlockfs = gfs2_unlockfs,
- .statfs = gfs2_statfs,
- .remount_fs = gfs2_remount_fs,
- .clear_inode = gfs2_clear_inode,
- .show_options = gfs2_show_options,
+ .alloc_inode = gfs2_alloc_inode,
+ .destroy_inode = gfs2_destroy_inode,
+ .write_inode = gfs2_write_inode,
+ .delete_inode = gfs2_delete_inode,
+ .put_super = gfs2_put_super,
+ .write_super = gfs2_write_super,
+ .sync_fs = gfs2_sync_fs,
+ .write_super_lockfs = gfs2_write_super_lockfs,
+ .unlockfs = gfs2_unlockfs,
+ .statfs = gfs2_statfs,
+ .remount_fs = gfs2_remount_fs,
+ .clear_inode = gfs2_clear_inode,
+ .show_options = gfs2_show_options,
};
diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c
index 4c7985e..b753ba2 100644
--- a/fs/jfs/xattr.c
+++ b/fs/jfs/xattr.c
@@ -756,6 +756,11 @@
return -EOPNOTSUPP;
}
+/*
+ * Most of the permission checking is done by xattr_permission in the vfs.
+ * The local file system is responsible for handling the system.* namespace.
+ * We also need to verify that this is a namespace that we recognize.
+ */
static int can_set_xattr(struct inode *inode, const char *name,
const void *value, size_t value_len)
{
@@ -771,10 +776,6 @@
strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN))
return -EOPNOTSUPP;
- if (!S_ISREG(inode->i_mode) &&
- (!S_ISDIR(inode->i_mode) || inode->i_mode &S_ISVTX))
- return -EPERM;
-
return 0;
}
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index 6341392..8ca1808 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -353,9 +353,6 @@
* Sysctl parameters (same as module parameters, different interface).
*/
-/* Something that isn't CTL_ANY, CTL_NONE or a value that may clash. */
-#define CTL_UNNUMBERED -2
-
static ctl_table nlm_sysctls[] = {
{
.ctl_name = CTL_UNNUMBERED,
diff --git a/fs/nfs/sysctl.c b/fs/nfs/sysctl.c
index 2fe3403..3ea50ac 100644
--- a/fs/nfs/sysctl.c
+++ b/fs/nfs/sysctl.c
@@ -18,11 +18,6 @@
static const int nfs_set_port_min = 0;
static const int nfs_set_port_max = 65535;
static struct ctl_table_header *nfs_callback_sysctl_table;
-/*
- * Something that isn't CTL_ANY, CTL_NONE or a value that may clash.
- * Use the same values as fs/lockd/svc.c
- */
-#define CTL_UNNUMBERED -2
static ctl_table nfs_cb_sysctls[] = {
#ifdef CONFIG_NFS_V4
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index e9d0770..81b8565 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -274,7 +274,7 @@
* any regular files anyway, just in case the directory was created by
* a kernel from the future.... */
nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
- mutex_lock(&dir->d_inode->i_mutex);
+ mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
status = vfs_rmdir(dir->d_inode, dentry);
mutex_unlock(&dir->d_inode->i_mutex);
return status;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 9041802..1724999 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1619,6 +1619,7 @@
"jmacd-8: reiserfs_fill_super: unable to read bitmap");
goto error;
}
+ errval = -EINVAL;
#ifdef CONFIG_REISERFS_CHECK
SWARN(silent, s, "CONFIG_REISERFS_CHECK is set ON");
SWARN(silent, s, "- it is slow mode for debugging.");
diff --git a/fs/splice.c b/fs/splice.c
index 8d70595..da74583 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1109,6 +1109,19 @@
EXPORT_SYMBOL(do_splice_direct);
/*
+ * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
+ * location, so checking ->i_pipe is not enough to verify that this is a
+ * pipe.
+ */
+static inline struct pipe_inode_info *pipe_info(struct inode *inode)
+{
+ if (S_ISFIFO(inode->i_mode))
+ return inode->i_pipe;
+
+ return NULL;
+}
+
+/*
* Determine where to splice to/from.
*/
static long do_splice(struct file *in, loff_t __user *off_in,
@@ -1119,7 +1132,7 @@
loff_t offset, *off;
long ret;
- pipe = in->f_dentry->d_inode->i_pipe;
+ pipe = pipe_info(in->f_dentry->d_inode);
if (pipe) {
if (off_in)
return -ESPIPE;
@@ -1140,7 +1153,7 @@
return ret;
}
- pipe = out->f_dentry->d_inode->i_pipe;
+ pipe = pipe_info(out->f_dentry->d_inode);
if (pipe) {
if (off_out)
return -ESPIPE;
@@ -1298,7 +1311,7 @@
static long do_vmsplice(struct file *file, const struct iovec __user *iov,
unsigned long nr_segs, unsigned int flags)
{
- struct pipe_inode_info *pipe = file->f_dentry->d_inode->i_pipe;
+ struct pipe_inode_info *pipe;
struct page *pages[PIPE_BUFFERS];
struct partial_page partial[PIPE_BUFFERS];
struct splice_pipe_desc spd = {
@@ -1308,7 +1321,8 @@
.ops = &user_page_pipe_buf_ops,
};
- if (unlikely(!pipe))
+ pipe = pipe_info(file->f_dentry->d_inode);
+ if (!pipe)
return -EBADF;
if (unlikely(nr_segs > UIO_MAXIOV))
return -EINVAL;
@@ -1535,8 +1549,8 @@
static long do_tee(struct file *in, struct file *out, size_t len,
unsigned int flags)
{
- struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe;
- struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe;
+ struct pipe_inode_info *ipipe = pipe_info(in->f_dentry->d_inode);
+ struct pipe_inode_info *opipe = pipe_info(out->f_dentry->d_inode);
int ret = -EINVAL;
/*
diff --git a/fs/xattr.c b/fs/xattr.c
index 3956351..0901bdc 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -48,14 +48,21 @@
return 0;
/*
- * The trusted.* namespace can only accessed by a privilegued user.
+ * The trusted.* namespace can only be accessed by a privileged user.
*/
if (!strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
return (capable(CAP_SYS_ADMIN) ? 0 : -EPERM);
+ /* In user.* namespace, only regular files and directories can have
+ * extended attributes. For sticky directories, only the owner and
+ * privileged user can write attributes.
+ */
if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN)) {
- if (!S_ISREG(inode->i_mode) &&
- (!S_ISDIR(inode->i_mode) || inode->i_mode & S_ISVTX))
+ if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode))
+ return -EPERM;
+ if (S_ISDIR(inode->i_mode) && (inode->i_mode & S_ISVTX) &&
+ (mask & MAY_WRITE) && (current->fsuid != inode->i_uid) &&
+ !capable(CAP_FOWNER))
return -EPERM;
}
diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
index a50e500..56ed1f9 100644
--- a/include/asm-avr32/unistd.h
+++ b/include/asm-avr32/unistd.h
@@ -280,9 +280,10 @@
#define __NR_sync_file_range 262
#define __NR_tee 263
#define __NR_vmsplice 264
+#define __NR_epoll_pwait 265
#ifdef __KERNEL__
-#define NR_syscalls 265
+#define NR_syscalls 266
#define __ARCH_WANT_IPC_PARSE_VERSION
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
index eac85ce..c6a0318 100644
--- a/include/asm-powerpc/systbl.h
+++ b/include/asm-powerpc/systbl.h
@@ -261,7 +261,7 @@
PPC_SYS_SPU(rtas)
OLDSYS(debug_setcontext)
SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
+COMPAT_SYS(migrate_pages)
COMPAT_SYS(mbind)
COMPAT_SYS(get_mempolicy)
COMPAT_SYS(set_mempolicy)
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 464a48c..b5fe932 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -276,7 +276,7 @@
#define __NR_rtas 255
#define __NR_sys_debug_setcontext 256
/* Number 257 is reserved for vserver */
-/* 258 currently unused */
+#define __NR_migrate_pages 258
#define __NR_mbind 259
#define __NR_get_mempolicy 260
#define __NR_set_mempolicy 261
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index c7a495a..f7827fa 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -318,12 +318,15 @@
#define __NR_unshare 299
#define __NR_set_robust_list 300
#define __NR_get_robust_list 301
+#define __NR_migrate_pages 302
+
+#define NR_SYSCALLS 303
#ifdef __KERNEL__
-/* WARNING: You MAY NOT add syscall numbers larger than 301, since
+/* WARNING: You MAY NOT add syscall numbers larger than 302, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 301 entries (starting at zero). Therefore
- * find a free slot in the 0-301 range.
+ * sized to have 302 entries (starting at zero). Therefore
+ * find a free slot in the 0-302 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index 124cf07..63669da 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -320,12 +320,16 @@
#define __NR_unshare 299
#define __NR_set_robust_list 300
#define __NR_get_robust_list 301
+#define __NR_migrate_pages 302
+
+#define NR_SYSCALLS 303
#ifdef __KERNEL__
-/* WARNING: You MAY NOT add syscall numbers larger than 301, since
+
+/* WARNING: You MAY NOT add syscall numbers larger than 302, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 301 entries (starting at zero). Therefore
- * find a free slot in the 0-301 range.
+ * sized to have 302 entries (starting at zero). Therefore
+ * find a free slot in the 0-302 range.
*/
#define _syscall0(type,name) \
diff --git a/include/linux/compat.h b/include/linux/compat.h
index f155319..80b17f4 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -230,5 +230,9 @@
extern int compat_printk(const char *fmt, ...);
extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat);
+asmlinkage long compat_sys_migrate_pages(compat_pid_t pid,
+ compat_ulong_t maxnode, const compat_ulong_t __user *old_nodes,
+ const compat_ulong_t __user *new_nodes);
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
index 4f29c60..eb19b4e 100644
--- a/include/linux/ipx.h
+++ b/include/linux/ipx.h
@@ -7,8 +7,8 @@
struct sockaddr_ipx {
sa_family_t sipx_family;
- __u16 sipx_port;
- __u32 sipx_network;
+ __be16 sipx_port;
+ __be32 sipx_network;
unsigned char sipx_node[IPX_NODE_LEN];
__u8 sipx_type;
unsigned char sipx_zero; /* 16 byte fill */
@@ -23,13 +23,13 @@
#define IPX_CRTITF 1
struct ipx_route_definition {
- __u32 ipx_network;
- __u32 ipx_router_network;
+ __be32 ipx_network;
+ __be32 ipx_router_network;
unsigned char ipx_router_node[IPX_NODE_LEN];
};
struct ipx_interface_definition {
- __u32 ipx_network;
+ __be32 ipx_network;
unsigned char ipx_device[16];
unsigned char ipx_dlink_type;
#define IPX_FRAME_NONE 0
@@ -55,8 +55,8 @@
*/
struct ipx_route_def {
- __u32 ipx_network;
- __u32 ipx_router_network;
+ __be32 ipx_network;
+ __be32 ipx_router_network;
#define IPX_ROUTE_NO_ROUTER 0
unsigned char ipx_router_node[IPX_NODE_LEN];
unsigned char ipx_device[16];
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 80f39ca..24b6111 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -171,6 +171,8 @@
extern int printk_ratelimit(void);
extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
static inline void console_silent(void)
{
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 6b27e07..070394e 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -116,7 +116,9 @@
#define PM_DISK_PLATFORM ((__force suspend_disk_method_t) 2)
#define PM_DISK_SHUTDOWN ((__force suspend_disk_method_t) 3)
#define PM_DISK_REBOOT ((__force suspend_disk_method_t) 4)
-#define PM_DISK_MAX ((__force suspend_disk_method_t) 5)
+#define PM_DISK_TEST ((__force suspend_disk_method_t) 5)
+#define PM_DISK_TESTPROC ((__force suspend_disk_method_t) 6)
+#define PM_DISK_MAX ((__force suspend_disk_method_t) 7)
struct pm_ops {
suspend_disk_method_t pm_disk_mode;
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 1b24bd4..d98562f 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -6,10 +6,17 @@
****************************************************************
****************************************************************
**
+ ** WARNING:
** The values in this file are exported to user space via
- ** the sysctl() binary interface. However this interface
- ** is unstable and deprecated and will be removed in the future.
- ** For a stable interface use /proc/sys.
+ ** the sysctl() binary interface. Do *NOT* change the
+ ** numbering of any existing values here, and do not change
+ ** any numbers within any one set of values. If you have to
+ ** have to redefine an existing interface, use a new number for it.
+ ** The kernel will then return -ENOTDIR to any application using
+ ** the old binary interface.
+ **
+ ** For new interfaces unless you really need a binary number
+ ** please use CTL_UNNUMBERED.
**
****************************************************************
****************************************************************
@@ -48,6 +55,7 @@
#ifdef __KERNEL__
#define CTL_ANY -1 /* Matches any name */
#define CTL_NONE 0
+#define CTL_UNNUMBERED CTL_NONE /* sysctl without a binary number */
#endif
enum
@@ -961,8 +969,8 @@
/*
* Register a set of sysctl names by calling register_sysctl_table
* with an initialised array of ctl_table's. An entry with zero
- * ctl_name terminates the table. table->de will be set up by the
- * registration and need not be initialised in advance.
+ * ctl_name and NULL procname terminates the table. table->de will be
+ * set up by the registration and need not be initialised in advance.
*
* sysctl names can be mirrored automatically under /proc/sys. The
* procname supplied controls /proc naming.
@@ -973,7 +981,10 @@
* Leaf nodes in the sysctl tree will be represented by a single file
* under /proc; non-leaf nodes will be represented by directories. A
* null procname disables /proc mirroring at this node.
- *
+ *
+ * sysctl entries with a zero ctl_name will not be available through
+ * the binary sysctl interface.
+ *
* sysctl(2) can automatically manage read and write requests through
* the sysctl table. The data and maxlen fields of the ctl_table
* struct enable minimal validation of the values being written to be
diff --git a/include/linux/ufs_fs.h b/include/linux/ufs_fs.h
index 61eef50..28967ed 100644
--- a/include/linux/ufs_fs.h
+++ b/include/linux/ufs_fs.h
@@ -908,7 +908,7 @@
__fs64 fs_csaddr; /* blk addr of cyl grp summary area */
__fs64 fs_pendingblocks;/* blocks in process of being freed */
__fs32 fs_pendinginodes;/*inodes in process of being freed */
- } fs_u2;
+ } __attribute__ ((packed)) fs_u2;
} fs_un1;
union {
struct {
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
index d599c6b..7849844 100644
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
@@ -48,7 +48,7 @@
#define IP6_ECN_flow_xmit(sk, label) do { \
if (INET_ECN_is_capable(inet_sk(sk)->tos)) \
- (label) |= __constant_htons(INET_ECN_ECT_0 << 4); \
+ (label) |= htonl(INET_ECN_ECT_0 << 20); \
} while (0)
static inline int IP_ECN_set_ce(struct iphdr *iph)
diff --git a/include/net/ipx.h b/include/net/ipx.h
index 5c0cf33..c6b2ee6 100644
--- a/include/net/ipx.h
+++ b/include/net/ipx.h
@@ -15,9 +15,9 @@
#include <linux/list.h>
struct ipx_address {
- __u32 net;
+ __be32 net;
__u8 node[IPX_NODE_LEN];
- __u16 sock;
+ __be16 sock;
};
#define ipx_broadcast_node "\377\377\377\377\377\377"
@@ -26,9 +26,9 @@
#define IPX_MAX_PPROP_HOPS 8
struct ipxhdr {
- __u16 ipx_checksum __attribute__ ((packed));
-#define IPX_NO_CHECKSUM 0xFFFF
- __u16 ipx_pktsize __attribute__ ((packed));
+ __be16 ipx_checksum __attribute__ ((packed));
+#define IPX_NO_CHECKSUM __constant_htons(0xFFFF)
+ __be16 ipx_pktsize __attribute__ ((packed));
__u8 ipx_tctrl;
__u8 ipx_type;
#define IPX_TYPE_UNKNOWN 0x00
@@ -48,14 +48,14 @@
struct ipx_interface {
/* IPX address */
- __u32 if_netnum;
+ __be32 if_netnum;
unsigned char if_node[IPX_NODE_LEN];
atomic_t refcnt;
/* physical device info */
struct net_device *if_dev;
struct datalink_proto *if_dlink;
- unsigned short if_dlink_type;
+ __be16 if_dlink_type;
/* socket support */
unsigned short if_sknum;
@@ -71,7 +71,7 @@
};
struct ipx_route {
- __u32 ir_net;
+ __be32 ir_net;
struct ipx_interface *ir_intrfc;
unsigned char ir_routed;
unsigned char ir_router_node[IPX_NODE_LEN];
@@ -82,10 +82,10 @@
#ifdef __KERNEL__
struct ipx_cb {
u8 ipx_tctrl;
- u32 ipx_dest_net;
- u32 ipx_source_net;
+ __be32 ipx_dest_net;
+ __be32 ipx_source_net;
struct {
- u32 netnum;
+ __be32 netnum;
int index;
} last_hop;
};
@@ -97,7 +97,7 @@
struct sock sk;
struct ipx_address dest_addr;
struct ipx_interface *intrfc;
- unsigned short port;
+ __be16 port;
#ifdef CONFIG_IPX_INTERN
unsigned char node[IPX_NODE_LEN];
#endif
@@ -132,7 +132,7 @@
extern int ipx_proc_init(void);
extern void ipx_proc_exit(void);
-extern const char *ipx_frame_name(unsigned short);
+extern const char *ipx_frame_name(__be16);
extern const char *ipx_device_name(struct ipx_interface *intrfc);
static __inline__ void ipxitf_hold(struct ipx_interface *intrfc)
diff --git a/ipc/msg.c b/ipc/msg.c
index 5b213d9..1266b1d 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -52,7 +52,7 @@
long r_msgtype;
long r_maxsize;
- volatile struct msg_msg *r_msg;
+ struct msg_msg *volatile r_msg;
};
/* one msg_sender for each sleeping sender */
@@ -124,6 +124,7 @@
}
mutex_unlock(&msg_ids(ns).mutex);
+ ipc_fini_ids(ns->ids[IPC_MSG_IDS]);
kfree(ns->ids[IPC_MSG_IDS]);
ns->ids[IPC_MSG_IDS] = NULL;
}
diff --git a/ipc/sem.c b/ipc/sem.c
index 0dafcc4..21b3289 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -161,6 +161,7 @@
}
mutex_unlock(&sem_ids(ns).mutex);
+ ipc_fini_ids(ns->ids[IPC_SEM_IDS]);
kfree(ns->ids[IPC_SEM_IDS]);
ns->ids[IPC_SEM_IDS] = NULL;
}
diff --git a/ipc/shm.c b/ipc/shm.c
index bfbd317..d1198dd 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -116,6 +116,7 @@
}
mutex_unlock(&shm_ids(ns).mutex);
+ ipc_fini_ids(ns->ids[IPC_SHM_IDS]);
kfree(ns->ids[IPC_SHM_IDS]);
ns->ids[IPC_SHM_IDS] = NULL;
}
diff --git a/ipc/util.c b/ipc/util.c
index 42479e4..cd8bb14 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -301,7 +301,7 @@
*/
rcu_assign_pointer(ids->entries, new);
- ipc_rcu_putref(old);
+ __ipc_fini_ids(ids, old);
return newsize;
}
diff --git a/ipc/util.h b/ipc/util.h
index c8fd6b9d..e3aa2c5 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -83,6 +83,18 @@
void ipc_rcu_getref(void *ptr);
void ipc_rcu_putref(void *ptr);
+static inline void __ipc_fini_ids(struct ipc_ids *ids,
+ struct ipc_id_ary *entries)
+{
+ if (entries != &ids->nullentry)
+ ipc_rcu_putref(entries);
+}
+
+static inline void ipc_fini_ids(struct ipc_ids *ids)
+{
+ __ipc_fini_ids(ids, ids->entries);
+}
+
struct kern_ipc_perm* ipc_get(struct ipc_ids* ids, int id);
struct kern_ipc_perm* ipc_lock(struct ipc_ids* ids, int id);
void ipc_lock_by_ptr(struct kern_ipc_perm *ipcp);
diff --git a/kernel/compat.c b/kernel/compat.c
index d4898aa..6952dd0 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -982,4 +982,37 @@
}
return sys_move_pages(pid, nr_pages, pages, nodes, status, flags);
}
+
+asmlinkage long compat_sys_migrate_pages(compat_pid_t pid,
+ compat_ulong_t maxnode,
+ const compat_ulong_t __user *old_nodes,
+ const compat_ulong_t __user *new_nodes)
+{
+ unsigned long __user *old = NULL;
+ unsigned long __user *new = NULL;
+ nodemask_t tmp_mask;
+ unsigned long nr_bits;
+ unsigned long size;
+
+ nr_bits = min_t(unsigned long, maxnode - 1, MAX_NUMNODES);
+ size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
+ if (old_nodes) {
+ if (compat_get_bitmap(nodes_addr(tmp_mask), old_nodes, nr_bits))
+ return -EFAULT;
+ old = compat_alloc_user_space(new_nodes ? size * 2 : size);
+ if (new_nodes)
+ new = old + size / sizeof(unsigned long);
+ if (copy_to_user(old, nodes_addr(tmp_mask), size))
+ return -EFAULT;
+ }
+ if (new_nodes) {
+ if (compat_get_bitmap(nodes_addr(tmp_mask), new_nodes, nr_bits))
+ return -EFAULT;
+ if (new == NULL)
+ new = compat_alloc_user_space(size);
+ if (copy_to_user(new, nodes_addr(tmp_mask), size))
+ return -EFAULT;
+ }
+ return sys_migrate_pages(pid, nr_bits + 1, old, new);
+}
#endif
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 663c920..272254f 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -58,8 +58,8 @@
recursive_depth--;
return;
}
- mutex_unlock(&cpu_bitmask_lock);
recursive = NULL;
+ mutex_unlock(&cpu_bitmask_lock);
}
EXPORT_SYMBOL_GPL(unlock_cpu_hotplug);
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 36752f1..66a0ea4 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -66,6 +66,7 @@
{
struct timespec ts;
s64 ns;
+ unsigned long flags;
do_posix_clock_monotonic_gettime(end);
ts = timespec_sub(*end, *start);
@@ -73,10 +74,10 @@
if (ns < 0)
return;
- spin_lock(¤t->delays->lock);
+ spin_lock_irqsave(¤t->delays->lock, flags);
*total += ns;
(*count)++;
- spin_unlock(¤t->delays->lock);
+ spin_unlock_irqrestore(¤t->delays->lock, flags);
}
void __delayacct_blkio_start(void)
@@ -104,6 +105,7 @@
s64 tmp;
struct timespec ts;
unsigned long t1,t2,t3;
+ unsigned long flags;
/* Though tsk->delays accessed later, early exit avoids
* unnecessary returning of other data
@@ -136,14 +138,14 @@
/* zero XXX_total, non-zero XXX_count implies XXX stat overflowed */
- spin_lock(&tsk->delays->lock);
+ spin_lock_irqsave(&tsk->delays->lock, flags);
tmp = d->blkio_delay_total + tsk->delays->blkio_delay;
d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;
tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
d->swapin_delay_total = (tmp < d->swapin_delay_total) ? 0 : tmp;
d->blkio_count += tsk->delays->blkio_count;
d->swapin_count += tsk->delays->swapin_count;
- spin_unlock(&tsk->delays->lock);
+ spin_unlock_irqrestore(&tsk->delays->lock, flags);
done:
return 0;
@@ -152,11 +154,12 @@
__u64 __delayacct_blkio_ticks(struct task_struct *tsk)
{
__u64 ret;
+ unsigned long flags;
- spin_lock(&tsk->delays->lock);
+ spin_lock_irqsave(&tsk->delays->lock, flags);
ret = nsec_to_clock_t(tsk->delays->blkio_delay +
tsk->delays->swapin_delay);
- spin_unlock(&tsk->delays->lock);
+ spin_unlock_irqrestore(&tsk->delays->lock, flags);
return ret;
}
diff --git a/kernel/futex.c b/kernel/futex.c
index b364e00..93ef30b 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1507,6 +1507,13 @@
struct futex_q *q;
struct file *filp;
int ret, err;
+ static unsigned long printk_interval;
+
+ if (printk_timed_ratelimit(&printk_interval, 60 * 60 * 1000)) {
+ printk(KERN_WARNING "Process `%s' used FUTEX_FD, which "
+ "will be removed from the kernel in June 2007\n",
+ current->comm);
+ }
ret = -EINVAL;
if (!valid_signal(signal))
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index d3a158a..b1fb786 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -71,7 +71,7 @@
static int prepare_processes(void)
{
- int error;
+ int error = 0;
pm_prepare_console();
@@ -84,6 +84,12 @@
goto thaw;
}
+ if (pm_disk_mode == PM_DISK_TESTPROC) {
+ printk("swsusp debug: Waiting for 5 seconds.\n");
+ mdelay(5000);
+ goto thaw;
+ }
+
/* Free memory before shutting down devices. */
if (!(error = swsusp_shrink_memory()))
return 0;
@@ -120,13 +126,21 @@
if (error)
return error;
+ if (pm_disk_mode == PM_DISK_TESTPROC)
+ goto Thaw;
+
suspend_console();
error = device_suspend(PMSG_FREEZE);
if (error) {
resume_console();
printk("Some devices failed to suspend\n");
- unprepare_processes();
- return error;
+ goto Thaw;
+ }
+
+ if (pm_disk_mode == PM_DISK_TEST) {
+ printk("swsusp debug: Waiting for 5 seconds.\n");
+ mdelay(5000);
+ goto Done;
}
pr_debug("PM: snapshotting memory.\n");
@@ -143,16 +157,17 @@
power_down(pm_disk_mode);
else {
swsusp_free();
- unprepare_processes();
- return error;
+ goto Thaw;
}
- } else
+ } else {
pr_debug("PM: Image restored successfully.\n");
+ }
swsusp_free();
Done:
device_resume();
resume_console();
+ Thaw:
unprepare_processes();
return error;
}
@@ -249,6 +264,8 @@
[PM_DISK_PLATFORM] = "platform",
[PM_DISK_SHUTDOWN] = "shutdown",
[PM_DISK_REBOOT] = "reboot",
+ [PM_DISK_TEST] = "test",
+ [PM_DISK_TESTPROC] = "testproc",
};
/**
@@ -303,17 +320,19 @@
}
}
if (mode) {
- if (mode == PM_DISK_SHUTDOWN || mode == PM_DISK_REBOOT)
+ if (mode == PM_DISK_SHUTDOWN || mode == PM_DISK_REBOOT ||
+ mode == PM_DISK_TEST || mode == PM_DISK_TESTPROC) {
pm_disk_mode = mode;
- else {
+ } else {
if (pm_ops && pm_ops->enter &&
(mode == pm_ops->pm_disk_mode))
pm_disk_mode = mode;
else
error = -EINVAL;
}
- } else
+ } else {
error = -EINVAL;
+ }
pr_debug("PM: suspend-to-disk mode set to '%s'\n",
pm_disk_modes[mode]);
diff --git a/kernel/printk.c b/kernel/printk.c
index f7d427e..6642655 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -31,6 +31,7 @@
#include <linux/security.h>
#include <linux/bootmem.h>
#include <linux/syscalls.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
@@ -1101,3 +1102,23 @@
printk_ratelimit_burst);
}
EXPORT_SYMBOL(printk_ratelimit);
+
+/**
+ * printk_timed_ratelimit - caller-controlled printk ratelimiting
+ * @caller_jiffies: pointer to caller's state
+ * @interval_msecs: minimum interval between prints
+ *
+ * printk_timed_ratelimit() returns true if more than @interval_msecs
+ * milliseconds have elapsed since the last time printk_timed_ratelimit()
+ * returned true.
+ */
+bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msecs)
+{
+ if (*caller_jiffies == 0 || time_after(jiffies, *caller_jiffies)) {
+ *caller_jiffies = jiffies + msecs_to_jiffies(interval_msecs);
+ return true;
+ }
+ return false;
+}
+EXPORT_SYMBOL(printk_timed_ratelimit);
diff --git a/kernel/signal.c b/kernel/signal.c
index 7ed8d53..df18c16 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -267,18 +267,25 @@
int override_rlimit)
{
struct sigqueue *q = NULL;
+ struct user_struct *user;
- atomic_inc(&t->user->sigpending);
+ /*
+ * In order to avoid problems with "switch_user()", we want to make
+ * sure that the compiler doesn't re-load "t->user"
+ */
+ user = t->user;
+ barrier();
+ atomic_inc(&user->sigpending);
if (override_rlimit ||
- atomic_read(&t->user->sigpending) <=
+ atomic_read(&user->sigpending) <=
t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
q = kmem_cache_alloc(sigqueue_cachep, flags);
if (unlikely(q == NULL)) {
- atomic_dec(&t->user->sigpending);
+ atomic_dec(&user->sigpending);
} else {
INIT_LIST_HEAD(&q->list);
q->flags = 0;
- q->user = get_uid(t->user);
+ q->user = get_uid(user);
}
return(q);
}
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 0e53314..d7306d0 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -135,6 +135,7 @@
cond_syscall(sys_mremap);
cond_syscall(sys_remap_file_pages);
cond_syscall(compat_sys_move_pages);
+cond_syscall(compat_sys_migrate_pages);
/* block-layer dependent */
cond_syscall(sys_bdflush);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8bff2c1..09e569f4 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1315,7 +1315,9 @@
return -ENOTDIR;
if (get_user(n, name))
return -EFAULT;
- for ( ; table->ctl_name; table++) {
+ for ( ; table->ctl_name || table->procname; table++) {
+ if (!table->ctl_name)
+ continue;
if (n == table->ctl_name || table->ctl_name == CTL_ANY) {
int error;
if (table->child) {
@@ -1532,7 +1534,7 @@
int len;
mode_t mode;
- for (; table->ctl_name; table++) {
+ for (; table->ctl_name || table->procname; table++) {
/* Can't do anything without a proc name. */
if (!table->procname)
continue;
@@ -1579,7 +1581,7 @@
static void unregister_proc_table(ctl_table * table, struct proc_dir_entry *root)
{
struct proc_dir_entry *de;
- for (; table->ctl_name; table++) {
+ for (; table->ctl_name || table->procname; table++) {
if (!(de = table->de))
continue;
if (de->mode & S_IFDIR) {
@@ -2680,13 +2682,33 @@
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
static int msg_count;
+ struct __sysctl_args tmp;
+ int name[CTL_MAXNAME];
+ int i;
+
+ /* Read in the sysctl name for better debug message logging */
+ if (copy_from_user(&tmp, args, sizeof(tmp)))
+ return -EFAULT;
+ if (tmp.nlen <= 0 || tmp.nlen >= CTL_MAXNAME)
+ return -ENOTDIR;
+ for (i = 0; i < tmp.nlen; i++)
+ if (get_user(name[i], tmp.name + i))
+ return -EFAULT;
+
+ /* Ignore accesses to kernel.version */
+ if ((tmp.nlen == 2) && (name[0] == CTL_KERN) && (name[1] == KERN_VERSION))
+ goto out;
if (msg_count < 5) {
msg_count++;
printk(KERN_INFO
"warning: process `%s' used the removed sysctl "
- "system call\n", current->comm);
+ "system call with ", current->comm);
+ for (i = 0; i < tmp.nlen; i++)
+ printk("%d.", name[i]);
+ printk("\n");
}
+out:
return -ENOSYS;
}
diff --git a/kernel/user.c b/kernel/user.c
index 6408c04..220e586 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -187,6 +187,17 @@
atomic_dec(&old_user->processes);
switch_uid_keyring(new_user);
current->user = new_user;
+
+ /*
+ * We need to synchronize with __sigqueue_alloc()
+ * doing a get_uid(p->user).. If that saw the old
+ * user value, we need to wait until it has exited
+ * its critical region before we can free the old
+ * structure.
+ */
+ smp_mb();
+ spin_unlock_wait(¤t->sighand->siglock);
+
free_uid(old_user);
suid_keys(current);
}
diff --git a/mm/migrate.c b/mm/migrate.c
index ba2453f..b4979d4 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -952,7 +952,8 @@
goto out;
pm[i].node = node;
- }
+ } else
+ pm[i].node = 0; /* anything to not match MAX_NUMNODES */
}
/* End marker */
pm[nr_pages].node = MAX_NUMNODES;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index b55bb35..bf2f6cf 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -853,7 +853,7 @@
pcp = &zone_pcp(zone, cpu)->pcp[cold];
local_irq_save(flags);
if (!pcp->count) {
- pcp->count += rmqueue_bulk(zone, 0,
+ pcp->count = rmqueue_bulk(zone, 0,
pcp->batch, &pcp->list);
if (unlikely(!pcp->count))
goto failed;
diff --git a/mm/readahead.c b/mm/readahead.c
index 1ba736a..23cb61a 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -173,6 +173,8 @@
if (mapping->a_ops->readpages) {
ret = mapping->a_ops->readpages(filp, mapping, pages, nr_pages);
+ /* Clean up the remaining pages */
+ put_pages_list(pages);
goto out;
}
diff --git a/mm/slab.c b/mm/slab.c
index 84c631f..3c4a7e3 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -883,7 +883,7 @@
if (node == MAX_NUMNODES)
node = first_node(node_online_map);
- __get_cpu_var(reap_node) = node;
+ per_cpu(reap_node, cpu) = node;
}
static void next_reap_node(void)
diff --git a/net/Kconfig b/net/Kconfig
index a81aca4..67e39ad 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -63,6 +63,7 @@
if INET
source "net/ipv4/Kconfig"
source "net/ipv6/Kconfig"
+source "net/netlabel/Kconfig"
endif # if INET
@@ -249,8 +250,6 @@
config WIRELESS_EXT
bool
-source "net/netlabel/Kconfig"
-
config FIB_RULES
bool
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index dd023fd..733d86d 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2304,6 +2304,12 @@
*mpls |= MPLS_STACK_BOTTOM;
}
+static inline __be16 build_tci(unsigned int id, unsigned int cfi,
+ unsigned int prio)
+{
+ return htons(id | (cfi << 12) | (prio << 13));
+}
+
static struct sk_buff *fill_packet_ipv4(struct net_device *odev,
struct pktgen_dev *pkt_dev)
{
@@ -2353,16 +2359,16 @@
if (pkt_dev->vlan_id != 0xffff) {
if(pkt_dev->svlan_id != 0xffff) {
svlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *svlan_tci = htons(pkt_dev->svlan_id);
- *svlan_tci |= pkt_dev->svlan_p << 5;
- *svlan_tci |= pkt_dev->svlan_cfi << 4;
+ *svlan_tci = build_tci(pkt_dev->svlan_id,
+ pkt_dev->svlan_cfi,
+ pkt_dev->svlan_p);
svlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*svlan_encapsulated_proto = __constant_htons(ETH_P_8021Q);
}
vlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *vlan_tci = htons(pkt_dev->vlan_id);
- *vlan_tci |= pkt_dev->vlan_p << 5;
- *vlan_tci |= pkt_dev->vlan_cfi << 4;
+ *vlan_tci = build_tci(pkt_dev->vlan_id,
+ pkt_dev->vlan_cfi,
+ pkt_dev->vlan_p);
vlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*vlan_encapsulated_proto = __constant_htons(ETH_P_IP);
}
@@ -2689,16 +2695,16 @@
if (pkt_dev->vlan_id != 0xffff) {
if(pkt_dev->svlan_id != 0xffff) {
svlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *svlan_tci = htons(pkt_dev->svlan_id);
- *svlan_tci |= pkt_dev->svlan_p << 5;
- *svlan_tci |= pkt_dev->svlan_cfi << 4;
+ *svlan_tci = build_tci(pkt_dev->svlan_id,
+ pkt_dev->svlan_cfi,
+ pkt_dev->svlan_p);
svlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*svlan_encapsulated_proto = __constant_htons(ETH_P_8021Q);
}
vlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *vlan_tci = htons(pkt_dev->vlan_id);
- *vlan_tci |= pkt_dev->vlan_p << 5;
- *vlan_tci |= pkt_dev->vlan_cfi << 4;
+ *vlan_tci = build_tci(pkt_dev->vlan_id,
+ pkt_dev->vlan_cfi,
+ pkt_dev->vlan_p);
vlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*vlan_encapsulated_proto = __constant_htons(ETH_P_IPV6);
}
diff --git a/net/core/sock.c b/net/core/sock.c
index d472db4..ee6cd25 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1160,7 +1160,7 @@
goto failure;
if (atomic_read(&sk->sk_wmem_alloc) < sk->sk_sndbuf) {
- skb = alloc_skb(header_len, sk->sk_allocation);
+ skb = alloc_skb(header_len, gfp_mask);
if (skb) {
int npages;
int i;
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 7707041..2759312 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -1078,12 +1078,12 @@
while (length >= sizeof(*info_element)) {
if (sizeof(*info_element) + info_element->len > length) {
- IEEE80211_ERROR("Info elem: parse failed: "
- "info_element->len + 2 > left : "
- "info_element->len+2=%zd left=%d, id=%d.\n",
- info_element->len +
- sizeof(*info_element),
- length, info_element->id);
+ IEEE80211_DEBUG_MGMT("Info elem: parse failed: "
+ "info_element->len + 2 > left : "
+ "info_element->len+2=%zd left=%d, id=%d.\n",
+ info_element->len +
+ sizeof(*info_element),
+ length, info_element->id);
/* We stop processing but don't return an error here
* because some misbehaviour APs break this rule. ie.
* Orinoco AP1000. */
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 41a8a5f..73eb8c3 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1742,6 +1742,7 @@
void ndisc_cleanup(void)
{
+ unregister_netdevice_notifier(&ndisc_netdev_notifier);
#ifdef CONFIG_SYSCTL
neigh_sysctl_unregister(&nd_tbl.parms);
#endif
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index b481a4d..be699f8 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -854,3 +854,4 @@
module_init(sit_init);
module_exit(sit_cleanup);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("sit0");
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index bef3f61..76c6615 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -83,13 +83,13 @@
struct ipx_interface *ipx_primary_net;
struct ipx_interface *ipx_internal_net;
-extern int ipxrtr_add_route(__u32 network, struct ipx_interface *intrfc,
+extern int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
unsigned char *node);
extern void ipxrtr_del_routes(struct ipx_interface *intrfc);
extern int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx,
struct iovec *iov, int len, int noblock);
extern int ipxrtr_route_skb(struct sk_buff *skb);
-extern struct ipx_route *ipxrtr_lookup(__u32 net);
+extern struct ipx_route *ipxrtr_lookup(__be32 net);
extern int ipxrtr_ioctl(unsigned int cmd, void __user *arg);
#undef IPX_REFCNT_DEBUG
@@ -177,7 +177,7 @@
}
static struct ipx_interface *__ipxitf_find_using_phys(struct net_device *dev,
- unsigned short datalink)
+ __be16 datalink)
{
struct ipx_interface *i;
@@ -190,7 +190,7 @@
}
static struct ipx_interface *ipxitf_find_using_phys(struct net_device *dev,
- unsigned short datalink)
+ __be16 datalink)
{
struct ipx_interface *i;
@@ -202,7 +202,7 @@
return i;
}
-struct ipx_interface *ipxitf_find_using_net(__u32 net)
+struct ipx_interface *ipxitf_find_using_net(__be32 net)
{
struct ipx_interface *i;
@@ -237,7 +237,7 @@
/* caller must hold intrfc->if_sklist_lock */
static struct sock *__ipxitf_find_socket(struct ipx_interface *intrfc,
- unsigned short port)
+ __be16 port)
{
struct sock *s;
struct hlist_node *node;
@@ -252,7 +252,7 @@
/* caller must hold a reference to intrfc */
static struct sock *ipxitf_find_socket(struct ipx_interface *intrfc,
- unsigned short port)
+ __be16 port)
{
struct sock *s;
@@ -268,7 +268,7 @@
#ifdef CONFIG_IPX_INTERN
static struct sock *ipxitf_find_internal_socket(struct ipx_interface *intrfc,
unsigned char *ipx_node,
- unsigned short port)
+ __be16 port)
{
struct sock *s;
struct hlist_node *node;
@@ -600,10 +600,10 @@
/* see if we need to include the netnum in the route list */
if (IPX_SKB_CB(skb)->last_hop.index >= 0) {
- u32 *last_hop = (u32 *)(((u8 *) skb->data) +
+ __be32 *last_hop = (__be32 *)(((u8 *) skb->data) +
sizeof(struct ipxhdr) +
IPX_SKB_CB(skb)->last_hop.index *
- sizeof(u32));
+ sizeof(__be32));
*last_hop = IPX_SKB_CB(skb)->last_hop.netnum;
IPX_SKB_CB(skb)->last_hop.index = -1;
}
@@ -772,7 +772,7 @@
} else {
printk(KERN_WARNING "IPX: Network number collision "
"%lx\n %s %s and %s %s\n",
- (unsigned long) htonl(cb->ipx_source_net),
+ (unsigned long) ntohl(cb->ipx_source_net),
ipx_device_name(i),
ipx_frame_name(i->if_dlink_type),
ipx_device_name(intrfc),
@@ -812,7 +812,7 @@
int i, rc = -EINVAL;
struct ipx_interface *ifcs;
char *c;
- u32 *l;
+ __be32 *l;
/* Illegal packet - too many hops or too short */
/* We decide to throw it away: no broadcasting, no local processing.
@@ -833,7 +833,7 @@
goto out;
c = ((u8 *) ipx) + sizeof(struct ipxhdr);
- l = (u32 *) c;
+ l = (__be32 *) c;
/* Don't broadcast packet if already seen this net */
for (i = 0; i < IPX_SKB_CB(skb)->ipx_tctrl; i++)
@@ -855,7 +855,7 @@
/* That aren't in the list */
if (ifcs == intrfc)
continue;
- l = (__u32 *) c;
+ l = (__be32 *) c;
/* don't consider the last entry in the packet list,
* it is our netnum, and it is not there yet */
for (i = 0; i < IPX_SKB_CB(skb)->ipx_tctrl; i++)
@@ -885,8 +885,8 @@
ipx_primary_net = intrfc;
}
-static struct ipx_interface *ipxitf_alloc(struct net_device *dev, __u32 netnum,
- unsigned short dlink_type,
+static struct ipx_interface *ipxitf_alloc(struct net_device *dev, __be32 netnum,
+ __be16 dlink_type,
struct datalink_proto *dlink,
unsigned char internal,
int ipx_offset)
@@ -960,7 +960,7 @@
static int ipxitf_create(struct ipx_interface_definition *idef)
{
struct net_device *dev;
- unsigned short dlink_type = 0;
+ __be16 dlink_type = 0;
struct datalink_proto *datalink = NULL;
struct ipx_interface *intrfc;
int rc;
@@ -1073,7 +1073,7 @@
static int ipxitf_delete(struct ipx_interface_definition *idef)
{
struct net_device *dev = NULL;
- unsigned short dlink_type = 0;
+ __be16 dlink_type = 0;
struct ipx_interface *intrfc;
int rc = 0;
@@ -1110,7 +1110,7 @@
}
static struct ipx_interface *ipxitf_auto_create(struct net_device *dev,
- unsigned short dlink_type)
+ __be16 dlink_type)
{
struct ipx_interface *intrfc = NULL;
struct datalink_proto *datalink;
@@ -1122,7 +1122,7 @@
if (dev->addr_len > IPX_NODE_LEN)
goto out;
- switch (htons(dlink_type)) {
+ switch (ntohs(dlink_type)) {
case ETH_P_IPX: datalink = pEII_datalink; break;
case ETH_P_802_2: datalink = p8022_datalink; break;
case ETH_P_SNAP: datalink = pSNAP_datalink; break;
@@ -1234,27 +1234,27 @@
/* Note: We assume ipx_tctrl==0 and htons(length)==ipx_pktsize */
/* This functions should *not* mess with packet contents */
-__u16 ipx_cksum(struct ipxhdr *packet, int length)
+__be16 ipx_cksum(struct ipxhdr *packet, int length)
{
/*
* NOTE: sum is a net byte order quantity, which optimizes the
* loop. This only works on big and little endian machines. (I
* don't know of a machine that isn't.)
*/
- /* start at ipx_dest - We skip the checksum field and start with
- * ipx_type before the loop, not considering ipx_tctrl in the calc */
- __u16 *p = (__u16 *)&packet->ipx_dest;
- __u32 i = (length >> 1) - 1; /* Number of complete words */
- __u32 sum = packet->ipx_type << sizeof(packet->ipx_tctrl);
+ /* handle the first 3 words separately; checksum should be skipped
+ * and ipx_tctrl masked out */
+ __u16 *p = (__u16 *)packet;
+ __u32 sum = p[1] + (p[2] & (__force u16)htons(0x00ff));
+ __u32 i = (length >> 1) - 3; /* Number of remaining complete words */
- /* Loop through all complete words except the checksum field,
- * ipx_type (accounted above) and ipx_tctrl (not used in the cksum) */
- while (--i)
+ /* Loop through them */
+ p += 3;
+ while (i--)
sum += *p++;
/* Add on the last part word if it exists */
if (packet->ipx_pktsize & htons(1))
- sum += ntohs(0xff00) & *p;
+ sum += (__force u16)htons(0xff00) & *p;
/* Do final fixup */
sum = (sum & 0xffff) + (sum >> 16);
@@ -1263,10 +1263,17 @@
if (sum >= 0x10000)
sum++;
- return ~sum;
+ /*
+ * Leave 0 alone; we don't want 0xffff here. Note that we can't get
+ * here with 0x10000, so this check is the same as ((__u16)sum)
+ */
+ if (sum)
+ sum = ~sum;
+
+ return (__force __be16)sum;
}
-const char *ipx_frame_name(unsigned short frame)
+const char *ipx_frame_name(__be16 frame)
{
char* rc = "None";
@@ -1401,7 +1408,7 @@
/* caller must hold a reference to intrfc */
-static unsigned short ipx_first_free_socketnum(struct ipx_interface *intrfc)
+static __be16 ipx_first_free_socketnum(struct ipx_interface *intrfc)
{
unsigned short socketNum = intrfc->if_sknum;
@@ -1410,7 +1417,7 @@
if (socketNum < IPX_MIN_EPHEMERAL_SOCKET)
socketNum = IPX_MIN_EPHEMERAL_SOCKET;
- while (__ipxitf_find_socket(intrfc, ntohs(socketNum)))
+ while (__ipxitf_find_socket(intrfc, htons(socketNum)))
if (socketNum > IPX_MAX_EPHEMERAL_SOCKET)
socketNum = IPX_MIN_EPHEMERAL_SOCKET;
else
@@ -1419,7 +1426,7 @@
spin_unlock_bh(&intrfc->if_sklist_lock);
intrfc->if_sknum = socketNum;
- return ntohs(socketNum);
+ return htons(socketNum);
}
static int ipx_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
@@ -1473,7 +1480,7 @@
ipxs->port)) {
SOCK_DEBUG(sk,
"IPX: bind failed because port %X in use.\n",
- ntohs((int)addr->sipx_port));
+ ntohs(addr->sipx_port));
goto out_put;
}
} else {
@@ -1488,7 +1495,7 @@
if (ipxitf_find_socket(intrfc, addr->sipx_port)) {
SOCK_DEBUG(sk,
"IPX: bind failed because port %X in use.\n",
- ntohs((int)addr->sipx_port));
+ ntohs(addr->sipx_port));
goto out_put;
}
}
@@ -1665,7 +1672,7 @@
intrfc = ipxitf_find_using_phys(dev, pt->type);
if (!intrfc) {
if (ipxcfg_auto_create_interfaces &&
- ntohl(IPX_SKB_CB(skb)->ipx_dest_net)) {
+ IPX_SKB_CB(skb)->ipx_dest_net) {
intrfc = ipxitf_auto_create(dev, pt->type);
if (intrfc)
ipxitf_hold(intrfc);
diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c
index 4c0c712..b7463df 100644
--- a/net/ipx/ipx_proc.c
+++ b/net/ipx/ipx_proc.c
@@ -260,22 +260,22 @@
ipxs = ipx_sk(s);
#ifdef CONFIG_IPX_INTERN
seq_printf(seq, "%08lX:%02X%02X%02X%02X%02X%02X:%04X ",
- (unsigned long)htonl(ipxs->intrfc->if_netnum),
+ (unsigned long)ntohl(ipxs->intrfc->if_netnum),
ipxs->node[0], ipxs->node[1], ipxs->node[2], ipxs->node[3],
- ipxs->node[4], ipxs->node[5], htons(ipxs->port));
+ ipxs->node[4], ipxs->node[5], ntohs(ipxs->port));
#else
- seq_printf(seq, "%08lX:%04X ", (unsigned long) htonl(ipxs->intrfc->if_netnum),
- htons(ipxs->port));
+ seq_printf(seq, "%08lX:%04X ", (unsigned long) ntohl(ipxs->intrfc->if_netnum),
+ ntohs(ipxs->port));
#endif /* CONFIG_IPX_INTERN */
if (s->sk_state != TCP_ESTABLISHED)
seq_printf(seq, "%-28s", "Not_Connected");
else {
seq_printf(seq, "%08lX:%02X%02X%02X%02X%02X%02X:%04X ",
- (unsigned long)htonl(ipxs->dest_addr.net),
+ (unsigned long)ntohl(ipxs->dest_addr.net),
ipxs->dest_addr.node[0], ipxs->dest_addr.node[1],
ipxs->dest_addr.node[2], ipxs->dest_addr.node[3],
ipxs->dest_addr.node[4], ipxs->dest_addr.node[5],
- htons(ipxs->dest_addr.sock));
+ ntohs(ipxs->dest_addr.sock));
}
seq_printf(seq, "%08X %08X %02X %03d\n",
diff --git a/net/ipx/ipx_route.c b/net/ipx/ipx_route.c
index a30dbb1..68560ee 100644
--- a/net/ipx/ipx_route.c
+++ b/net/ipx/ipx_route.c
@@ -19,17 +19,17 @@
extern struct ipx_interface *ipx_internal_net;
-extern __u16 ipx_cksum(struct ipxhdr *packet, int length);
-extern struct ipx_interface *ipxitf_find_using_net(__u32 net);
+extern __be16 ipx_cksum(struct ipxhdr *packet, int length);
+extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
extern int ipxitf_send(struct ipx_interface *intrfc, struct sk_buff *skb,
char *node);
-extern struct ipx_interface *ipxitf_find_using_net(__u32 net);
+extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
-struct ipx_route *ipxrtr_lookup(__u32 net)
+struct ipx_route *ipxrtr_lookup(__be32 net)
{
struct ipx_route *r;
@@ -48,7 +48,7 @@
/*
* Caller must hold a reference to intrfc
*/
-int ipxrtr_add_route(__u32 network, struct ipx_interface *intrfc,
+int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
unsigned char *node)
{
struct ipx_route *rt;
@@ -118,7 +118,7 @@
return rc;
}
-static int ipxrtr_delete(__u32 net)
+static int ipxrtr_delete(__be32 net)
{
struct ipx_route *r, *tmp;
int rc;
@@ -238,7 +238,7 @@
/* Apply checksum. Not allowed on 802.3 links. */
if (sk->sk_no_check || intrfc->if_dlink_type == htons(IPX_FRAME_8023))
- ipx->ipx_checksum = 0xFFFF;
+ ipx->ipx_checksum = htons(0xFFFF);
else
ipx->ipx_checksum = ipx_cksum(ipx, len + sizeof(struct ipxhdr));
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index b59d3b2..b2bf8f2 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -427,7 +427,7 @@
nfmsg->version = NFNETLINK_V0;
nfmsg->res_id = htons(inst->group_num);
- pmsg.hw_protocol = htons(skb->protocol);
+ pmsg.hw_protocol = skb->protocol;
pmsg.hook = hooknum;
NFA_PUT(inst->skb, NFULA_PACKET_HDR, sizeof(pmsg), &pmsg);
@@ -878,7 +878,7 @@
params = NFA_DATA(nfula[NFULA_CFG_MODE-1]);
nfulnl_set_mode(inst, params->copy_mode,
- ntohs(params->copy_range));
+ ntohl(params->copy_range));
}
if (nfula[NFULA_CFG_TIMEOUT-1]) {
@@ -896,8 +896,8 @@
}
if (nfula[NFULA_CFG_QTHRESH-1]) {
- u_int32_t qthresh =
- *(u_int16_t *)NFA_DATA(nfula[NFULA_CFG_QTHRESH-1]);
+ __be32 qthresh =
+ *(__be32 *)NFA_DATA(nfula[NFULA_CFG_QTHRESH-1]);
nfulnl_set_qthresh(inst, ntohl(qthresh));
}
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 8eb2473..6e4ada3 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -414,7 +414,7 @@
nfmsg->res_id = htons(queue->queue_num);
pmsg.packet_id = htonl(entry->id);
- pmsg.hw_protocol = htons(entskb->protocol);
+ pmsg.hw_protocol = entskb->protocol;
pmsg.hook = entinf->hook;
NFA_PUT(skb, NFQA_PACKET_HDR, sizeof(pmsg), &pmsg);
diff --git a/net/netlabel/Kconfig b/net/netlabel/Kconfig
index 9f7121a..56958c8 100644
--- a/net/netlabel/Kconfig
+++ b/net/netlabel/Kconfig
@@ -4,7 +4,7 @@
config NETLABEL
bool "NetLabel subsystem support"
- depends on NET && SECURITY
+ depends on SECURITY
default n
---help---
NetLabel provides support for explicit network packet labeling
diff --git a/net/sunrpc/svcauth.c b/net/sunrpc/svcauth.c
index 0004c1f..ee9bb15 100644
--- a/net/sunrpc/svcauth.c
+++ b/net/sunrpc/svcauth.c
@@ -126,6 +126,7 @@
if (atomic_dec_and_lock(&dom->ref.refcount, &auth_domain_lock)) {
hlist_del(&dom->hash);
dom->flavour->domain_release(dom);
+ spin_unlock(&auth_domain_lock);
}
}
diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c
index 4ab6cbf..d6071cb 100644
--- a/scripts/basic/docproc.c
+++ b/scripts/basic/docproc.c
@@ -250,7 +250,7 @@
void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
/*
- * Document spåecific function(s) in a file.
+ * Document specific function(s) in a file.
* Call kernel-doc with the following parameters:
* kernel-doc -docbook -function function1 [-function function2]
*/
