diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 2df7186..d9271e7 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -1,82 +1,35 @@
 Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
 ===============================================================
 
-September 26, 2006
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
-- Building and Installation
 - Command Line Parameters
 - Speed and Duplex Configuration
 - Additional Configurations
-- Known Issues
 - Support
 
-
-In This Release
-===============
-
-This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters.  This driver includes support for Itanium(R)2-based systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
-apply to use with Linux.
-
-The following features are now available in supported kernels:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release.  Alternatively, you can use ethtool (version 1.6
-or later), lspci, and ifconfig to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
-support.
-
-
 Identifying Your Adapter
 ========================
 
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/adapter/pro100/21397.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 For the latest Intel network drivers for Linux, refer to the following
 website.  In the search field, enter your adapter name or type, or use the
 networking link on the left to search for your adapter:
 
-    http://downloadfinder.intel.com/scripts-df/support_intel.asp
-
+    http://support.intel.com/support/go/network/adapter/home.htm
 
 Command Line Parameters
 =======================
 
-If the driver is built as a module, the  following optional parameters
-are used by entering them on the command line with the modprobe command
-using this syntax:
-
-     modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two PRO/1000 PCI adapters, entering:
-
-     modprobe e1000 TxDescriptors=80,128
-
-loads the e1000 driver with 80 TX descriptors for the first adapter and
-128 TX descriptors for the second adapter.
-
 The default value for each parameter is generally the recommended setting,
 unless otherwise noted.
 
@@ -89,10 +42,6 @@
         parameters, see the application note at:
         http://www.intel.com/design/network/applnots/ap450.htm
 
-        A descriptor describes a data buffer and attributes related to
-        the data buffer.  This information is accessed by the hardware.
-
-
 AutoNeg
 -------
 (Supported only on adapters with copper connections)
@@ -106,7 +55,6 @@
 NOTE:  Refer to the Speed and Duplex section of this readme for more
        information on the AutoNeg parameter.
 
-
 Duplex
 ------
 (Supported only on adapters with copper connections)
@@ -119,7 +67,6 @@
 link partner is forced (either full or half), Duplex defaults to half-
 duplex.
 
-
 FlowControl
 -----------
 Valid Range:   0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
@@ -128,16 +75,16 @@
 This parameter controls the automatic generation(Tx) and response(Rx)
 to Ethernet PAUSE frames.
 
-
 InterruptThrottleRate
 ---------------------
 (not supported on Intel(R) 82542, 82543 or 82544-based adapters)
-Valid Range:   0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
 Default Value: 3
 
 The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the 
-adapter that is based on the maximum amount of interrupts that the adapter 
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
 will generate per second.
 
 Setting InterruptThrottleRate to a value greater or equal to 100
@@ -146,37 +93,43 @@
 load on the system and can lower CPU utilization under heavy load,
 but will increase latency as packets are not processed as quickly.
 
-The default behaviour of the driver previously assumed a static 
-InterruptThrottleRate value of 8000, providing a good fallback value for 
-all traffic types,but lacking in small packet performance and latency. 
-The hardware can handle many more small packets per second however, and 
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types,but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
 for this reason an adaptive interrupt moderation algorithm was implemented.
 
 Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic 
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
 that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value 
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
 for that traffic.
 
 The algorithm classifies the incoming traffic every interval into
-classes.  Once the class is determined, the InterruptThrottleRate value is 
-adjusted to suit that traffic type the best. There are three classes defined: 
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
 "Bulk traffic", for large amounts of packets of normal size; "Low latency",
 for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or 
+packets; and "Lowest latency", for almost completely small packets or
 minimal traffic.
 
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low 
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased 
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
 stepwise to 20000. This default mode is suitable for most applications.
 
 For situations where low latency is vital such as cluster or
 grid computing, the algorithm can reduce latency even more when
 InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to 
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
 70000 for traffic in class "Lowest latency".
 
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal, the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
 Setting InterruptThrottleRate to 0 turns off any interrupt moderation
 and may improve small packet latency, but is generally not suitable
 for bulk throughput traffic.
@@ -212,8 +165,6 @@
        be platform-specific.  If CPU utilization is not a concern, use
        RX_POLLING (NAPI) and default driver settings.
 
-
-
 RxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -225,15 +176,14 @@
 incoming packets, at the expense of increased system memory utilization.
 
 Each descriptor is 16 bytes.  A receive buffer is also allocated for each
-descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending 
+descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
 on the MTU setting. The maximum MTU size is 16110.
 
-NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo 
-       Frames.  Depending on the available system resources, the request 
-       for a higher number of receive descriptors may be denied.  In this 
+NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo
+       Frames.  Depending on the available system resources, the request
+       for a higher number of receive descriptors may be denied.  In this
        case, use a lower number.
 
-
 RxIntDelay
 ----------
 Valid Range:   0-65535 (0=off)
@@ -254,7 +204,6 @@
           restoring the network connection.  To eliminate the potential
           for the hang ensure that RxIntDelay is set to 0.
 
-
 RxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -268,7 +217,6 @@
 along with RxIntDelay, may improve traffic throughput in specific network
 conditions.
 
-
 Speed
 -----
 (This parameter is supported only on adapters with copper connections.)
@@ -280,7 +228,6 @@
 partner is set to auto-negotiate, the board will auto-detect the correct
 speed.  Duplex should also be set when Speed is set to either 10 or 100.
 
-
 TxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -295,6 +242,36 @@
        higher number of transmit descriptors may be denied.  In this case,
        use a lower number.
 
+TxDescriptorStep
+----------------
+Valid Range:    1 (use every Tx Descriptor)
+		4 (use every 4th Tx Descriptor)
+
+Default Value:  1 (use every Tx Descriptor)
+
+On certain non-Intel architectures, it has been observed that intense TX
+traffic bursts of short packets may result in an improper descriptor
+writeback. If this occurs, the driver will report a "TX Timeout" and reset
+the adapter, after which the transmit flow will restart, though data may
+have stalled for as much as 10 seconds before it resumes.
+
+The improper writeback does not occur on the first descriptor in a system
+memory cache-line, which is typically 32 bytes, or 4 descriptors long.
+
+Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
+are aligned to the start of a system memory cache line, and so this problem
+will not occur.
+
+NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
+       TxDescriptors available for transmits to 1/4 of the normal allocation.
+       This has a possible negative performance impact, which may be
+       compensated for by allocating more descriptors using the TxDescriptors
+       module parameter.
+
+       There are other conditions which may result in "TX Timeout", which will
+       not be resolved by the use of the TxDescriptorStep parameter. As the
+       issue addressed by this parameter has never been observed on Intel
+       Architecture platforms, it should not be used on Intel platforms.
 
 TxIntDelay
 ----------
@@ -307,7 +284,6 @@
 system is reporting dropped transmits, this value may be set too high
 causing the driver to run out of available transmit descriptors.
 
-
 TxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -330,6 +306,35 @@
 A value of '1' indicates that the driver should enable IP checksum
 offload for received packets (both UDP and TCP) to the adapter hardware.
 
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+Usage: insmod e1000.ko copybreak=128
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can turn off
+this parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
 
 Speed and Duplex Configuration
 ==============================
@@ -385,40 +390,9 @@
 parameter should not be used.  Instead, use the Speed and Duplex parameters
 previously mentioned to force the adapter to the same speed and duplex.
 
-
 Additional Configurations
 =========================
 
-  Configuring the Driver on Different Distributions
-  -------------------------------------------------
-  Configuring a network driver to load properly when the system is started
-  is distribution dependent.  Typically, the configuration process involves
-  adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
-  as editing other system startup scripts and/or configuration files.  Many
-  popular Linux distributions ship with tools to make these changes for you.
-  To learn the proper way to configure a network device for your system,
-  refer to your distribution documentation.  If during this process you are
-  asked for the driver or module name, the name for the Linux Base Driver
-  for the Intel(R) PRO/1000 Family of Adapters is e1000.
-
-  As an example, if you install the e1000 driver for two PRO/1000 adapters
-  (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
-  the following to modules.conf or or modprobe.conf:
-
-       alias eth0 e1000
-       alias eth1 e1000
-       options e1000 Speed=10,100 Duplex=2,1
-
-  Viewing Link Messages
-  ---------------------
-  Link messages will not be displayed to the console if the distribution is
-  restricting system messages.  In order to see network driver link messages
-  on your console, set dmesg to eight by entering the following:
-
-       dmesg -n 8
-
-  NOTE: This setting is not saved across reboots.
-
   Jumbo Frames
   ------------
   Jumbo Frames support is enabled by changing the MTU to a value larger than
@@ -437,9 +411,11 @@
    setting in a different location.
 
   Notes:
-
-  - To enable Jumbo Frames, increase the MTU size on the interface beyond
-    1500.
+  Degradation in throughput performance may be observed in some Jumbo frames
+  environments. If this is observed, increasing the application's socket buffer
+  size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+  See the specific application manual and /usr/src/linux*/Documentation/
+  networking/ip-sysctl.txt for more details.
 
   - The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
     with the maximum Jumbo Frames size of 16128.
@@ -447,40 +423,11 @@
   - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
     loss of link.
 
-  - Some Intel gigabit adapters that support Jumbo Frames have a frame size
-    limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
-    The adapters with this limitation are based on the Intel(R) 82571EB,
-    82572EI, 82573L and 80003ES2LAN controller.  These correspond to the
-    following product names:
-     Intel(R) PRO/1000 PT Server Adapter
-     Intel(R) PRO/1000 PT Desktop Adapter
-     Intel(R) PRO/1000 PT Network Connection
-     Intel(R) PRO/1000 PT Dual Port Server Adapter
-     Intel(R) PRO/1000 PT Dual Port Network Connection
-     Intel(R) PRO/1000 PF Server Adapter
-     Intel(R) PRO/1000 PF Network Connection
-     Intel(R) PRO/1000 PF Dual Port Server Adapter
-     Intel(R) PRO/1000 PB Server Connection
-     Intel(R) PRO/1000 PL Network Connection
-     Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
-     Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
-     Intel(R) PRO/1000 PT Quad Port Server Adapter
-
   - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
     support Jumbo Frames. These correspond to the following product names:
      Intel(R) PRO/1000 Gigabit Server Adapter
      Intel(R) PRO/1000 PM Network Connection
 
-  - The following adapters do not support Jumbo Frames:
-     Intel(R) 82562V 10/100 Network Connection
-     Intel(R) 82566DM Gigabit Network Connection
-     Intel(R) 82566DC Gigabit Network Connection
-     Intel(R) 82566MM Gigabit Network Connection
-     Intel(R) 82566MC Gigabit Network Connection
-     Intel(R) 82562GT 10/100 Network Connection
-     Intel(R) 82562G 10/100 Network Connection
-
-
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
@@ -490,142 +437,14 @@
   The latest release of ethtool can be found from
   http://sourceforge.net/projects/gkernel.
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options.  Support
-  for a more complete ethtool feature set can be enabled by upgrading
-  ethtool to ethtool-1.8.1.
-
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is configured through the Ethtool* utility.  Ethtool is included with
-  all versions of Red Hat after Red Hat 7.2.  For other Linux distributions,
-  download and install Ethtool from the following website:
-  http://sourceforge.net/projects/gkernel.
-
-  For instructions on enabling WoL with Ethtool, refer to the website listed
-  above.
+  WoL is configured through the Ethtool* utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be
   loaded when shutting down or rebooting the system.
 
-  Wake On LAN is only supported on port A for the following devices:
-  Intel(R) PRO/1000 PT Dual Port Network Connection
-  Intel(R) PRO/1000 PT Dual Port Server Connection
-  Intel(R) PRO/1000 PT Dual Port Server Adapter
-  Intel(R) PRO/1000 PF Dual Port Server Adapter
-  Intel(R) PRO/1000 PT Quad Port Server Adapter
-
-  NAPI
-  ----
-  NAPI (Rx polling mode) is enabled in the e1000 driver.
-
-  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues
-============
-
-Dropped Receive Packets on Half-duplex 10/100 Networks
-------------------------------------------------------
-If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
-duplex, you may observe occasional dropped receive packets.  There are no
-workarounds for this problem in this network configuration.  The network must
-be updated to operate in full-duplex, and/or 1000mbps only.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames.  If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments.  If this is observed, increasing the application's socket
-buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
-may help.  See the specific application manual and
-/usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Jumbo Frames on Foundry BigIron 8000 switch
--------------------------------------------
-There is a known issue using Jumbo frames when connected to a Foundry
-BigIron 8000 switch.  This is a 3rd party limitation.  If you experience
-loss of packets, lower the MTU size.
-
-Allocating Rx Buffers when Using Jumbo Frames 
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if 
-the available memory is heavily fragmented. This issue may be seen with PCI-X 
-adapters or with packet split disabled. This can be reduced or eliminated 
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes. 
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected.  All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, either turn on ARP
-filtering by entering:
-
-    echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-(this only works if your kernel's version is higher than 2.4.5),
-
-NOTE: This setting is not saved across reboots.  The configuration
-change can be made permanent by adding the line:
-    net.ipv4.conf.all.arp_filter = 1
-to the file /etc/sysctl.conf
-
-      or,
-
-install the interfaces in separate broadcast domains (either in
-different switches or in a switch partitioned to VLANs).
-
-82541/82547 can't link or are slow to link with some link partners
------------------------------------------------------------------
-There is a known compatibility issue with 82541/82547 and some
-low-end switches where the link will not be established, or will
-be slow to establish.  In particular, these switches are known to
-be incompatible with 82541/82547:
-
-    Planex FXG-08TE
-    I-O Data ETG-SH8
-
-To workaround this issue, the driver can be compiled with an override
-of the PHY's master/slave setting.  Forcing master or forcing slave
-mode will improve time-to-link.
-
-    # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
-
-Where <n> is:
-
-    0 = Hardware default
-    1 = Master mode
-    2 = Slave mode
-    3 = Auto master/slave
-
-Disable rx flow control with ethtool
-------------------------------------
-In order to disable receive flow control using ethtool, you must turn
-off auto-negotiation on the same command line.
-
-For example:
-
-   ethtool -A eth? autoneg off rx off
-
-Unplugging network cable while ethtool -p is running
-----------------------------------------------------
-In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
-the network cable while ethtool -p is running will cause the system to
-become unresponsive to keyboard commands, except for control-alt-delete.
-Restarting the system appears to be the only remedy.
-
-
 Support
 =======
 
diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt
new file mode 100644
index 0000000..6aa048ba
--- /dev/null
+++ b/Documentation/networking/e1000e.txt
@@ -0,0 +1,302 @@
+Linux* Driver for Intel(R) Network Connection
+===============================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+The e1000e driver supports all PCI Express Intel(R) Gigabit Network
+Connections, except those that are 82575, 82576 and 82580-based*.
+
+* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
+  the e1000 driver, not the e1000e driver due to the 82546 part being used
+  behind a PCI Express bridge.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website.  In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+    http://support.intel.com/support/go/network/adapter/home.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTES:  For more information about the InterruptThrottleRate,
+        RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+        parameters, see the application note at:
+        http://www.intel.com/design/network/applnots/ap450.htm
+
+InterruptThrottleRate
+---------------------
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
+Default Value: 3
+
+The driver can limit the amount of interrupts per second that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
+will generate per second.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+stepwise to 20000. This default mode is suitable for most applications.
+
+For situations where low latency is vital such as cluster or
+grid computing, the algorithm can reduce latency even more when
+InterruptThrottleRate is set to mode 1. In this mode, which operates
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+70000 for traffic in class "Lowest latency".
+
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
+Setting InterruptThrottleRate to 0 turns off any interrupt moderation
+and may improve small packet latency, but is generally not suitable
+for bulk throughput traffic.
+
+NOTE:  InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+       RxAbsIntDelay parameters.  In other words, minimizing the receive
+       and/or transmit absolute delays does not force the controller to
+       generate more interrupts than what the Interrupt Throttle Rate
+       allows.
+
+NOTE:  When e1000e is loaded with default settings and multiple adapters
+       are in use simultaneously, the CPU utilization may increase non-
+       linearly.  In order to limit the CPU utilization without impacting
+       the overall throughput, we recommend that you load the driver as
+       follows:
+
+           modprobe e1000e InterruptThrottleRate=3000,3000,3000
+
+       This sets the InterruptThrottleRate to 3000 interrupts/sec for
+       the first, second, and third instances of the driver.  The range
+       of 2000 to 3000 interrupts per second works on a majority of
+       systems and is a good starting point, but the optimal value will
+       be platform-specific.  If CPU utilization is not a concern, use
+       RX_POLLING (NAPI) and default driver settings.
+
+RxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds.  Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic.  Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic.  If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
+          hang (stop transmitting) under certain network conditions.  If
+          this occurs a NETDEV WATCHDOG message is logged in the system
+          event log.  In addition, the controller is automatically reset,
+          restoring the network connection.  To eliminate the potential
+          for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated.  Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time.  Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+TxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds.  Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic.  If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated.  Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time.  Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000e/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can set this parameter
+in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
+
+IntMode
+-------
+Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
+Default Value: 2
+
+Allows changing the interrupt mode at module load time, without requiring a
+recompile. If the driver load fails to enable a specific interrupt mode, the
+driver will try other interrupt modes, from least to most compatible.  The
+interrupt order is MSI-X, MSI, Legacy.  If specifying MSI (IntMode=1)
+interrupts, only MSI and Legacy will be attempted.
+
+CrcStripping
+------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack.  If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Set the hardware to ignore all write/erase cycles to the GbE region in the
+ICHx NVM (non-volatile memory).  This feature can be disabled by the
+WriteProtectNVM module parameter (enabled by default) only after a hardware
+reset, but the machine must be power cycled before trying to enable writes.
+
+Note: the kernel boot option iomem=relaxed may need to be set if the kernel
+config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
+NVM from user space via ethtool.
+
+Additional Configurations
+=========================
+
+  Jumbo Frames
+  ------------
+  Jumbo Frames support is enabled by changing the MTU to a value larger than
+  the default of 1500.  Use the ifconfig command to increase the MTU size.
+  For example:
+
+       ifconfig eth<x> mtu 9000 up
+
+  This setting is not saved across reboots.
+
+  Notes:
+
+  - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
+    with the maximum Jumbo Frames size of 9234 bytes.
+
+  - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
+    poor performance or loss of link.
+
+  - Some adapters limit Jumbo Frames sized packets to a maximum of
+    4096 bytes and some adapters do not support Jumbo Frames.
+
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.  We
+  strongly recommend downloading the latest version of Ethtool at:
+
+  http://sourceforge.net/projects/gkernel.
+
+  Speed and Duplex
+  ----------------
+  Speed and Duplex are configured through the Ethtool* utility. For
+  instructions,  refer to the Ethtool man page.
+
+  Enabling Wake on LAN* (WoL)
+  ---------------------------
+  WoL is configured through the Ethtool* utility. For instructions on
+  enabling WoL with Ethtool, refer to the Ethtool man page.
+
+  WoL will be enabled on the system during the next shut down or reboot.
+  For this driver version, in order to enable WoL, the e1000e driver must be
+  loaded when shutting down or rebooting the system.
+
+  In most cases Wake On LAN is only supported on port A for multiple port
+  adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
old mode 100755
new mode 100644
index 19015de..21dd5d1
--- a/Documentation/networking/ixgbevf.txt
+++ b/Documentation/networking/ixgbevf.txt
@@ -1,19 +1,16 @@
 Linux* Base Driver for Intel(R) Network Connection
 ==================================================
 
-November 24, 2009
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
 - Known Issues/Troubleshooting
 - Support
 
-In This Release
-===============
-
 This file describes the ixgbevf Linux* Base Driver for Intel Network
 Connection.
 
@@ -33,7 +30,7 @@
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/sb/CS-008441.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 Known Issues/Troubleshooting
 ============================
@@ -57,34 +54,3 @@
 If an issue is identified with the released source code on the supported
 kernel with a supported adapter, email the specific information related
 to the issue to e1000-devel@lists.sf.net
-
-License
-=======
-
-Intel 10 Gigabit Linux driver.
-Copyright(c) 1999 - 2009 Intel Corporation.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms and conditions of the GNU General Public License,
-version 2, as published by the Free Software Foundation.
-
-This program is distributed in the hope it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-The full GNU General Public License is included in this distribution in
-the file called "COPYING".
-
-Trademarks
-==========
-
-Intel, Itanium, and Pentium are trademarks or registered trademarks of
-Intel Corporation or its subsidiaries in the United States and other
-countries.
-
-* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index ccd951f..cc96ee2 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -478,7 +478,7 @@
 	}
 
 	if (opt_unpoison && !hwpoison_forget_fd) {
-		sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+		sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
 		hwpoison_forget_fd = checked_open(buf, O_WRONLY);
 	}
 }
diff --git a/MAINTAINERS b/MAINTAINERS
index f46d8e6..7679bf3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -969,6 +969,16 @@
 S:	Maintained
 F:	arch/arm/mach-s5p*/
 
+ARM/SAMSUNG S5P SERIES FIMC SUPPORT
+M:	Kyungmin Park <kyungmin.park@samsung.com>
+M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	arch/arm/plat-s5p/dev-fimc*
+F:	arch/arm/plat-samsung/include/plat/*fimc*
+F:	drivers/media/video/s5p-fimc/
+
 ARM/SHMOBILE ARM ARCHITECTURE
 M:	Paul Mundt <lethal@linux-sh.org>
 M:	Magnus Damm <magnus.damm@gmail.com>
@@ -2535,7 +2545,7 @@
 F:	drivers/scsi/gdt*
 
 GENERIC GPIO I2C DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 S:	Supported
 F:	drivers/i2c/busses/i2c-gpio.c
 F:	include/linux/i2c-gpio.h
@@ -3063,16 +3073,27 @@
 S:	Maintained
 F:	drivers/net/ixp2000/
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Bruce Allan <bruce.w.allan@intel.com>
-M:	Alex Duyck <alexander.h.duyck@intel.com>
+M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
+M:	Don Skidmore <donald.c.skidmore@intel.com>
+M:	Greg Rose <gregory.v.rose@intel.com>
 M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
 S:	Supported
+F:	Documentation/networking/e100.txt
+F:	Documentation/networking/e1000.txt
+F:	Documentation/networking/e1000e.txt
+F:	Documentation/networking/igb.txt
+F:	Documentation/networking/igbvf.txt
+F:	Documentation/networking/ixgb.txt
+F:	Documentation/networking/ixgbe.txt
+F:	Documentation/networking/ixgbevf.txt
 F:	drivers/net/e100.c
 F:	drivers/net/e1000/
 F:	drivers/net/e1000e/
@@ -3080,6 +3101,7 @@
 F:	drivers/net/igbvf/
 F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
+F:	drivers/net/ixgbevf/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
 L:	linux-wireless@vger.kernel.org
@@ -5008,6 +5030,12 @@
 F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
+SAMSUNG AUDIO (ASoC) DRIVERS
+M:	Jassi Brar <jassi.brar@samsung.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Supported
+F:	sound/soc/s3c24xx
+
 TLG2300 VIDEO4LINUX-2 DRIVER
 M:	Huang Shijie <shijie8@gmail.com>
 M:	Kang Yong <kangyong@telegent.com>
@@ -6450,8 +6478,10 @@
 WOLFSON MICROELECTRONICS DRIVERS
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 M:	Ian Lartey <ian@opensource.wolfsonmicro.com>
+M:	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
-W:	http://opensource.wolfsonmicro.com/node/8
+W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	drivers/leds/leds-wm83*.c
diff --git a/Makefile b/Makefile
index 77b5c6e..7583116 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc7
-NAME = Sheep on Meth
+EXTRAVERSION = -rc8
+NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 88c97bc..9c26ba7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1101,6 +1101,20 @@
 	  invalidated are not, resulting in an incoherency in the system page
 	  tables. The workaround changes the TLB flushing routines to invalidate
 	  entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 743622 Cortex-A9
+	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  optimisation in the Cortex-A9 Store Buffer may lead to data
+	  corruption. This workaround sets a specific bit in the diagnostic
+	  register of the Cortex-A9 which disables the Store Buffer
+	  optimisation, preventing the defect from occurring. This has no
+	  visible impact on the overall performance or power consumption of the
+	  processor.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8bccbfa..2c1f005 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -1162,11 +1162,12 @@
 {
 	/*
 	 * MSR   : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
-	 * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+	 * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
 	 * ALU op with S bit and Rd == 15 :
 	 *	   cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
 	 */
-	if ((insn & 0x0f900000) == 0x03200000 ||	/* MSR & Undef */
+	if ((insn & 0x0fb00000) == 0x03200000 ||	/* MSR */
+	    (insn & 0x0ff00000) == 0x03400000 ||	/* Undef */
 	    (insn & 0x0e10f000) == 0x0210f000)		/* ALU s-bit, R15  */
 		return INSN_REJECTED;
 
@@ -1177,7 +1178,7 @@
 	 * *S (bit 20) updates condition codes
 	 * ADC/SBC/RSC reads the C flag
 	 */
-	insn &= 0xfff00fff;	/* Rn = r0, Rd = r0 */
+	insn &= 0xffff0fff;	/* Rd = r0 */
 	asi->insn[0] = insn;
 	asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
 			emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index c80e090..ee8db15 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -28,17 +28,16 @@
 
 static inline void arch_idle(void)
 {
-#ifndef CONFIG_DEBUG_KERNEL
 	/*
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
 	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#else
+#ifndef CONFIG_CPU_ARM920T
 	/*
 	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
+	 * Post-RM9200 processors need this in conjunction with the above
+	 * to save power when idle.
 	 */
 	cpu_do_idle();
 #endif
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index 8904ca4..a696d35 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -276,7 +276,7 @@
 	v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
 	m2p_set_control(ch, v);
 
-	while (m2p_channel_state(ch) == STATE_ON)
+	while (m2p_channel_state(ch) >= STATE_ON)
 		cpu_relax();
 
 	m2p_set_control(ch, 0x0);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c5c0369..2f7e272 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -122,6 +122,7 @@
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
 	  specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 339150a..6830afd 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -259,7 +259,7 @@
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
 
-	imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
+	imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
index 526f33a..ec592e8 100644
--- a/arch/arm/mach-s5p6440/cpu.c
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
index a48fb55..70ac681 100644
--- a/arch/arm/mach-s5p6442/cpu.c
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 251c92a..cd1afbc 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -21,6 +21,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index cfecd70..d562670 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -173,11 +173,6 @@
 	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
 }
 
-static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
-}
-
 static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 77f456c..245b82b 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index efb1270..71fb173 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -68,7 +68,7 @@
 }
 
 #if 0
-static void ct_ca9x4_timer_init(void)
+static void __init ct_ca9x4_timer_init(void)
 {
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
@@ -222,7 +222,7 @@
 	.resource	= pmu_resources,
 };
 
-static void ct_ca9x4_init(void)
+static void __init ct_ca9x4_init(void)
 {
 	int i;
 
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 817f0ad..7eaa232 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -48,7 +48,7 @@
 }
 
 
-static void v2m_timer_init(void)
+static void __init v2m_timer_init(void)
 {
 	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index ab50627..17e7b0b 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -204,8 +204,12 @@
 	/*
 	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
 	 */
-	if (WARN_ON(pfn_valid(pfn)))
-		return NULL;
+	if (pfn_valid(pfn)) {
+		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
+		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
+		WARN_ON(1);
+	}
 
 	type = get_mem_type(mtype);
 	if (!type)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6a3a2d0..e8ed9dc 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -248,7 +248,7 @@
 	},
 	[MT_MEMORY] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC,
+				L_PTE_WRITE | L_PTE_EXEC,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
@@ -259,7 +259,7 @@
 	},
 	[MT_MEMORY_NONCACHED] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+				L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7563ff0..197f21b 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -253,6 +253,14 @@
 	orreq	r10, r10, #1 << 22		@ set bit #22
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
+#ifdef CONFIG_ARM_ERRATA_743622
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 6		@ set bit #6
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
 3:	mov	r10, #0
 #ifdef HARVARD_CACHE
@@ -365,7 +373,7 @@
 	b	__v7_ca9mp_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_v7_name
 	.long	v7_processor_functions
 	.long	v7wbi_tlb_fns
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index a202a2c..6cd151b 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -320,6 +320,7 @@
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 04d9521..e8f2be2 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -435,7 +435,6 @@
 static int s3c_adc_resume(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
-	unsigned long flags;
 
 	clk_enable(adc->clk);
 	enable_irq(adc->irq);
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 90a2051..e8d20b0 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -48,6 +48,9 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 
+#include <linux/serial_core.h>
+#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+
 /* clock information */
 
 static LIST_HEAD(clocks);
@@ -65,6 +68,28 @@
 	return 0;
 }
 
+static int dev_is_s3c_uart(struct device *dev)
+{
+	struct platform_device **pdev = s3c24xx_uart_devs;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++)
+		if (*pdev && dev == &(*pdev)->dev)
+			return 1;
+	return 0;
+}
+
+/*
+ * Serial drivers call get_clock() very early, before platform bus
+ * has been set up, this requires a special check to let them get
+ * a proper clock
+ */
+
+static int dev_is_platform_device(struct device *dev)
+{
+	return dev->bus == &platform_bus_type ||
+	       (dev->bus == NULL && dev_is_s3c_uart(dev));
+}
+
 /* Clock API calls */
 
 struct clk *clk_get(struct device *dev, const char *id)
@@ -73,7 +98,7 @@
 	struct clk *clk = ERR_PTR(-ENOENT);
 	int idno;
 
-	if (dev == NULL || dev->bus != &platform_bus_type)
+	if (dev == NULL || !dev_is_platform_device(dev))
 		idno = -1;
 	else
 		idno = to_platform_device(dev)->id;
diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h
index 96e28f1..1ca64b4 100644
--- a/arch/mips/include/asm/siginfo.h
+++ b/arch/mips/include/asm/siginfo.h
@@ -88,6 +88,7 @@
 #ifdef __ARCH_SI_TRAPNO
 			int _trapno;	/* TRAP # which caused the signal */
 #endif
+			short _addr_lsb;
 		} _sigfault;
 
 		/* SIGPOLL, SIGXFSZ (To do ...)  */
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 0350311..2d93bdb 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -34,7 +34,7 @@
 #include <asm/ia32.h>
 
 #undef WARN_OLD
-#undef CORE_DUMP /* probably broken */
+#undef CORE_DUMP /* definitely broken */
 
 static int load_aout_binary(struct linux_binprm *, struct pt_regs *regs);
 static int load_aout_library(struct file *);
@@ -131,21 +131,15 @@
  * macros to write out all the necessary info.
  */
 
-static int dump_write(struct file *file, const void *addr, int nr)
-{
-	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
+#include <linux/coredump.h>
 
 #define DUMP_WRITE(addr, nr)			     \
 	if (!dump_write(file, (void *)(addr), (nr))) \
 		goto end_coredump;
 
-#define DUMP_SEEK(offset)						\
-	if (file->f_op->llseek) {					\
-		if (file->f_op->llseek(file, (offset), 0) != (offset))	\
-			goto end_coredump;				\
-	} else								\
-		file->f_pos = (offset)
+#define DUMP_SEEK(offset)		\
+	if (!dump_seek(file, offset))	\
+		goto end_coredump;
 
 #define START_DATA()	(u.u_tsize << PAGE_SHIFT)
 #define START_STACK(u)	(u.start_stack)
@@ -217,12 +211,6 @@
 		dump_size = dump.u_ssize << PAGE_SHIFT;
 		DUMP_WRITE(dump_start, dump_size);
 	}
-	/*
-	 * Finally dump the task struct.  Not be used by gdb, but
-	 * could be useful
-	 */
-	set_fs(KERNEL_DS);
-	DUMP_WRITE(current, sizeof(*current));
 end_coredump:
 	set_fs(fs);
 	return has_dumped;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 5e97529..39aaee5 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -141,6 +141,7 @@
 				address = (low & MASK_BLKPTR_LO) >> 21;
 				if (!address)
 					break;
+
 				address += MCG_XBLK_ADDR;
 			} else
 				++address;
@@ -148,12 +149,8 @@
 			if (rdmsr_safe(address, &low, &high))
 				break;
 
-			if (!(high & MASK_VALID_HI)) {
-				if (block)
-					continue;
-				else
-					break;
-			}
+			if (!(high & MASK_VALID_HI))
+				continue;
 
 			if (!(high & MASK_CNTP_HI)  ||
 			     (high & MASK_LOCKED_HI))
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index d9368ee..169d880 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -216,7 +216,7 @@
 		err = sysfs_add_file_to_group(&sys_dev->kobj,
 					      &attr_core_power_limit_count.attr,
 					      thermal_attr_group.name);
-	if (cpu_has(c, X86_FEATURE_PTS))
+	if (cpu_has(c, X86_FEATURE_PTS)) {
 		err = sysfs_add_file_to_group(&sys_dev->kobj,
 					      &attr_package_throttle_count.attr,
 					      thermal_attr_group.name);
@@ -224,6 +224,7 @@
 			err = sysfs_add_file_to_group(&sys_dev->kobj,
 					&attr_package_power_limit_count.attr,
 					thermal_attr_group.name);
+	}
 
 	return err;
 }
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index bc5b9b8..81ed28c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -766,7 +766,6 @@
 
 	control->iopm_base_pa = iopm_base;
 	control->msrpm_base_pa = __pa(svm->msrpm);
-	control->tsc_offset = 0;
 	control->int_ctl = V_INTR_MASKING_MASK;
 
 	init_seg(&save->es);
@@ -902,6 +901,7 @@
 	svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
 	svm->asid_generation = 0;
 	init_vmcb(svm);
+	svm->vmcb->control.tsc_offset = 0-native_read_tsc();
 
 	err = fx_init(&svm->vcpu);
 	if (err)
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index f9897f7..9c0d0d3 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -420,9 +420,11 @@
 		return -1;
 	}
 
-	for_each_node_mask(i, nodes_parsed)
-		e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
-						nodes[i].end >> PAGE_SHIFT);
+	for (i = 0; i < num_node_memblks; i++)
+		e820_register_active_regions(memblk_nodeid[i],
+				node_memblk_range[i].start >> PAGE_SHIFT,
+				node_memblk_range[i].end >> PAGE_SHIFT);
+
 	/* for out of order entries in SRAT */
 	sort_node_map();
 	if (!nodes_cover_memory(nodes)) {
diff --git a/block/elevator.c b/block/elevator.c
index 205b09a..4e11559 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -938,6 +938,7 @@
 			}
 		}
 		kobject_uevent(&e->kobj, KOBJ_ADD);
+		e->registered = 1;
 	}
 	return error;
 }
@@ -947,6 +948,7 @@
 {
 	kobject_uevent(&e->kobj, KOBJ_REMOVE);
 	kobject_del(&e->kobj);
+	e->registered = 0;
 }
 
 void elv_unregister_queue(struct request_queue *q)
@@ -1042,11 +1044,13 @@
 
 	spin_unlock_irq(q->queue_lock);
 
-	__elv_unregister_queue(old_elevator);
+	if (old_elevator->registered) {
+		__elv_unregister_queue(old_elevator);
 
-	err = elv_register_queue(q);
-	if (err)
-		goto fail_register;
+		err = elv_register_queue(q);
+		if (err)
+			goto fail_register;
+	}
 
 	/*
 	 * finally exit old elevator and turn off BYPASS.
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index f761960..af308d0 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -204,6 +204,23 @@
 		},
 	},
 	{
+	/*
+	 * There have a NVIF method in MSI GX723 DSDT need call by Nvidia
+	 * driver (e.g. nouveau) when user press brightness hotkey.
+	 * Currently, nouveau driver didn't do the job and it causes there
+	 * have a infinite while loop in DSDT when user press hotkey.
+	 * We add MSI GX723's dmi information to this table for workaround
+	 * this issue.
+	 * Will remove MSI GX723 from the table after nouveau grows support.
+	 */
+	.callback = dmi_disable_osi_vista,
+	.ident = "MSI GX723",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "GX723"),
+		},
+	},
+	{
 	.callback = dmi_disable_osi_vista,
 	.ident = "Sony VGN-NS10J_S",
 	.matches = {
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index b618f88..bec561c 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -346,4 +346,5 @@
 	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
 			    early_init_pdc, NULL, NULL, NULL);
+	acpi_get_devices("ACPI0007", early_init_pdc, NULL, NULL);
 }
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index ee9ddeb..8cb0347 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -3156,7 +3156,6 @@
 {  
 	struct atm_dev *dev;  
 	IADEV *iadev;  
-        unsigned long flags;
 	int ret;
 
 	iadev = kzalloc(sizeof(*iadev), GFP_KERNEL);
@@ -3188,19 +3187,14 @@
 	ia_dev[iadev_count] = iadev;
 	_ia_dev[iadev_count] = dev;
 	iadev_count++;
-	spin_lock_init(&iadev->misc_lock);
-	/* First fixes first. I don't want to think about this now. */
-	spin_lock_irqsave(&iadev->misc_lock, flags); 
 	if (ia_init(dev) || ia_start(dev)) {  
 		IF_INIT(printk("IA register failed!\n");)
 		iadev_count--;
 		ia_dev[iadev_count] = NULL;
 		_ia_dev[iadev_count] = NULL;
-		spin_unlock_irqrestore(&iadev->misc_lock, flags); 
 		ret = -EINVAL;
 		goto err_out_deregister_dev;
 	}
-	spin_unlock_irqrestore(&iadev->misc_lock, flags); 
 	IF_EVENT(printk("iadev_count = %d\n", iadev_count);)
 
 	iadev->next_board = ia_boards;  
diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
index b2cd20f..077735e 100644
--- a/drivers/atm/iphase.h
+++ b/drivers/atm/iphase.h
@@ -1022,7 +1022,7 @@
 	struct dle_q rx_dle_q;  
 	struct free_desc_q *rx_free_desc_qhead;  
 	struct sk_buff_head rx_dma_q;  
-        spinlock_t rx_lock, misc_lock;
+	spinlock_t rx_lock;
 	struct atm_vcc **rx_open;	/* list of all open VCs */  
         u16 num_rx_desc, rx_buf_sz, rxing;
         u32 rx_pkt_ram, rx_tmp_cnt;
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index f916ddf..f46138a 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -444,6 +444,7 @@
 	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 	struct solos_card *card = atmdev->dev_data;
 	struct sk_buff *skb;
+	unsigned int len;
 
 	spin_lock(&card->cli_queue_lock);
 	skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
@@ -451,11 +452,12 @@
 	if(skb == NULL)
 		return sprintf(buf, "No data.\n");
 
-	memcpy(buf, skb->data, skb->len);
-	dev_dbg(&card->dev->dev, "len: %d\n", skb->len);
+	len = skb->len;
+	memcpy(buf, skb->data, len);
+	dev_dbg(&card->dev->dev, "len: %d\n", len);
 
 	kfree_skb(skb);
-	return skb->len;
+	return len;
 }
 
 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 2aafafc..1101e25 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -202,6 +202,7 @@
 	struct virtio_blk *vblk = disk->private_data;
 	struct request *req;
 	struct bio *bio;
+	int err;
 
 	bio = bio_map_kern(vblk->disk->queue, id_str, VIRTIO_BLK_ID_BYTES,
 			   GFP_KERNEL);
@@ -215,7 +216,10 @@
 	}
 
 	req->cmd_type = REQ_TYPE_SPECIAL;
-	return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+	err = blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+	blk_put_request(req);
+
+	return err;
 }
 
 static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode,
diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c
index 216f9d3..effd140 100644
--- a/drivers/dma/ioat/dma_v2.c
+++ b/drivers/dma/ioat/dma_v2.c
@@ -879,7 +879,7 @@
 	dma->device_issue_pending = ioat2_issue_pending;
 	dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
 	dma->device_free_chan_resources = ioat2_free_chan_resources;
-	dma->device_tx_status = ioat_tx_status;
+	dma->device_tx_status = ioat_dma_tx_status;
 
 	err = ioat_probe(device);
 	if (err)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index c74e4e8..2dd2c93 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -2231,6 +2231,9 @@
 	dev_priv->mchdev_lock = &mchdev_lock;
 	spin_unlock(&mchdev_lock);
 
+	/* XXX Prevent module unload due to memory corruption bugs. */
+	__module_get(THIS_MODULE);
+
 	return 0;
 
 out_workqueue_free:
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 56ad9df..b61966c 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -238,8 +238,8 @@
 
 	drm_framebuffer_cleanup(&ifb->base);
 	if (ifb->obj) {
-		drm_gem_object_handle_unreference(ifb->obj);
 		drm_gem_object_unreference(ifb->obj);
+		ifb->obj = NULL;
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index d204771..dbd30b2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -352,7 +352,6 @@
 
 	if (nouveau_fb->nvbo) {
 		nouveau_bo_unmap(nouveau_fb->nvbo);
-		drm_gem_object_handle_unreference_unlocked(nouveau_fb->nvbo->gem);
 		drm_gem_object_unreference_unlocked(nouveau_fb->nvbo->gem);
 		nouveau_fb->nvbo = NULL;
 	}
diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c
index 3c9964a..3ec181f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_notifier.c
+++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c
@@ -79,7 +79,6 @@
 	mutex_lock(&dev->struct_mutex);
 	nouveau_bo_unpin(chan->notifier_bo);
 	mutex_unlock(&dev->struct_mutex);
-	drm_gem_object_handle_unreference_unlocked(chan->notifier_bo->gem);
 	drm_gem_object_unreference_unlocked(chan->notifier_bo->gem);
 	drm_mm_takedown(&chan->notifier_heap);
 }
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 79082d4..2f93d46 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1137,7 +1137,7 @@
 
 		WREG32(RCU_IND_INDEX, 0x203);
 		efuse_straps_3 = RREG32(RCU_IND_DATA);
-		efuse_box_bit_127_124 = (u8)(efuse_straps_3 & 0xF0000000) >> 28;
+		efuse_box_bit_127_124 = (u8)((efuse_straps_3 & 0xF0000000) >> 28);
 
 		switch(efuse_box_bit_127_124) {
 		case 0x0:
@@ -1407,6 +1407,7 @@
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 
@@ -1520,7 +1521,7 @@
 {
 	u32 tmp;
 
-	WREG32(CP_INT_CNTL, 0);
+	WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
 	WREG32(GRBM_INT_CNTL, 0);
 	WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
 	WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index e151f16..e594223 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -1030,6 +1030,7 @@
 		return r;
 	}
 	rdev->cp.ready = true;
+	rdev->mc.active_vram_size = rdev->mc.real_vram_size;
 	return 0;
 }
 
@@ -1047,6 +1048,7 @@
 void r100_cp_disable(struct radeon_device *rdev)
 {
 	/* Disable ring */
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	rdev->cp.ready = false;
 	WREG32(RADEON_CP_CSQ_MODE, 0);
 	WREG32(RADEON_CP_CSQ_CNTL, 0);
@@ -2295,6 +2297,7 @@
 	/* FIXME we don't use the second aperture yet when we could use it */
 	if (rdev->mc.visible_vram_size > rdev->mc.aper_size)
 		rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
 	if (rdev->flags & RADEON_IS_IGP) {
 		uint32_t tom;
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 7a04959..7b65e4ef 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1248,6 +1248,7 @@
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 
 	if (rdev->flags & RADEON_IS_IGP) {
@@ -1917,6 +1918,7 @@
  */
 void r600_cp_stop(struct radeon_device *rdev)
 {
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1));
 }
 
@@ -2910,7 +2912,7 @@
 {
 	u32 tmp;
 
-	WREG32(CP_INT_CNTL, 0);
+	WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
 	WREG32(GRBM_INT_CNTL, 0);
 	WREG32(DxMODE_INT_MASK, 0);
 	if (ASIC_IS_DCE3(rdev)) {
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 9ceb2a1..3473c00 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -532,6 +532,7 @@
 	memcpy(ptr + rdev->r600_blit.ps_offset, r6xx_ps, r6xx_ps_size * 4);
 	radeon_bo_kunmap(rdev->r600_blit.shader_obj);
 	radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+	rdev->mc.active_vram_size = rdev->mc.real_vram_size;
 	return 0;
 }
 
@@ -539,6 +540,7 @@
 {
 	int r;
 
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	if (rdev->r600_blit.shader_obj == NULL)
 		return;
 	/* If we can't reserve the bo, unref should be enough to destroy
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index a168d64..9ff38c9 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -344,6 +344,7 @@
 	 * about vram size near mc fb location */
 	u64			mc_vram_size;
 	u64			visible_vram_size;
+	u64			active_vram_size;
 	u64			gtt_size;
 	u64			gtt_start;
 	u64			gtt_end;
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 68932ba..8e43dda 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1558,39 +1558,39 @@
 		switch (tv_info->ucTV_BootUpDefaultStandard) {
 		case ATOM_TV_NTSC:
 			tv_std = TV_STD_NTSC;
-			DRM_INFO("Default TV standard: NTSC\n");
+			DRM_DEBUG_KMS("Default TV standard: NTSC\n");
 			break;
 		case ATOM_TV_NTSCJ:
 			tv_std = TV_STD_NTSC_J;
-			DRM_INFO("Default TV standard: NTSC-J\n");
+			DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
 			break;
 		case ATOM_TV_PAL:
 			tv_std = TV_STD_PAL;
-			DRM_INFO("Default TV standard: PAL\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL\n");
 			break;
 		case ATOM_TV_PALM:
 			tv_std = TV_STD_PAL_M;
-			DRM_INFO("Default TV standard: PAL-M\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
 			break;
 		case ATOM_TV_PALN:
 			tv_std = TV_STD_PAL_N;
-			DRM_INFO("Default TV standard: PAL-N\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-N\n");
 			break;
 		case ATOM_TV_PALCN:
 			tv_std = TV_STD_PAL_CN;
-			DRM_INFO("Default TV standard: PAL-CN\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-CN\n");
 			break;
 		case ATOM_TV_PAL60:
 			tv_std = TV_STD_PAL_60;
-			DRM_INFO("Default TV standard: PAL-60\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
 			break;
 		case ATOM_TV_SECAM:
 			tv_std = TV_STD_SECAM;
-			DRM_INFO("Default TV standard: SECAM\n");
+			DRM_DEBUG_KMS("Default TV standard: SECAM\n");
 			break;
 		default:
 			tv_std = TV_STD_NTSC;
-			DRM_INFO("Unknown TV standard; defaulting to NTSC\n");
+			DRM_DEBUG_KMS("Unknown TV standard; defaulting to NTSC\n");
 			break;
 		}
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index a04b7a6..7b7ea26 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -913,47 +913,47 @@
 			switch (RBIOS8(tv_info + 7) & 0xf) {
 			case 1:
 				tv_std = TV_STD_NTSC;
-				DRM_INFO("Default TV standard: NTSC\n");
+				DRM_DEBUG_KMS("Default TV standard: NTSC\n");
 				break;
 			case 2:
 				tv_std = TV_STD_PAL;
-				DRM_INFO("Default TV standard: PAL\n");
+				DRM_DEBUG_KMS("Default TV standard: PAL\n");
 				break;
 			case 3:
 				tv_std = TV_STD_PAL_M;
-				DRM_INFO("Default TV standard: PAL-M\n");
+				DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
 				break;
 			case 4:
 				tv_std = TV_STD_PAL_60;
-				DRM_INFO("Default TV standard: PAL-60\n");
+				DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
 				break;
 			case 5:
 				tv_std = TV_STD_NTSC_J;
-				DRM_INFO("Default TV standard: NTSC-J\n");
+				DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
 				break;
 			case 6:
 				tv_std = TV_STD_SCART_PAL;
-				DRM_INFO("Default TV standard: SCART-PAL\n");
+				DRM_DEBUG_KMS("Default TV standard: SCART-PAL\n");
 				break;
 			default:
 				tv_std = TV_STD_NTSC;
-				DRM_INFO
+				DRM_DEBUG_KMS
 				    ("Unknown TV standard; defaulting to NTSC\n");
 				break;
 			}
 
 			switch ((RBIOS8(tv_info + 9) >> 2) & 0x3) {
 			case 0:
-				DRM_INFO("29.498928713 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("29.498928713 MHz TV ref clk\n");
 				break;
 			case 1:
-				DRM_INFO("28.636360000 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("28.636360000 MHz TV ref clk\n");
 				break;
 			case 2:
-				DRM_INFO("14.318180000 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("14.318180000 MHz TV ref clk\n");
 				break;
 			case 3:
-				DRM_INFO("27.000000000 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("27.000000000 MHz TV ref clk\n");
 				break;
 			default:
 				break;
@@ -1324,7 +1324,7 @@
 
 	if (tmds_info) {
 		ver = RBIOS8(tmds_info);
-		DRM_INFO("DFP table revision: %d\n", ver);
+		DRM_DEBUG_KMS("DFP table revision: %d\n", ver);
 		if (ver == 3) {
 			n = RBIOS8(tmds_info + 5) + 1;
 			if (n > 4)
@@ -1408,7 +1408,7 @@
 		offset = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
 		if (offset) {
 			ver = RBIOS8(offset);
-			DRM_INFO("External TMDS Table revision: %d\n", ver);
+			DRM_DEBUG_KMS("External TMDS Table revision: %d\n", ver);
 			tmds->slave_addr = RBIOS8(offset + 4 + 2);
 			tmds->slave_addr >>= 1; /* 7 bit addressing */
 			gpio = RBIOS8(offset + 4 + 3);
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 9cdf6a3..40b0c08 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -97,7 +97,6 @@
 		radeon_bo_unpin(rbo);
 		radeon_bo_unreserve(rbo);
 	}
-	drm_gem_object_handle_unreference(gobj);
 	drm_gem_object_unreference_unlocked(gobj);
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 0afd1e6..b3b5306 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -69,7 +69,7 @@
 	u32 c = 0;
 
 	rbo->placement.fpfn = 0;
-	rbo->placement.lpfn = 0;
+	rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
 	rbo->placement.placement = rbo->placements;
 	rbo->placement.busy_placement = rbo->placements;
 	if (domain & RADEON_GEM_DOMAIN_VRAM)
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index 353998d..3481bc7 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -124,11 +124,8 @@
 	int r;
 
 	r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
-	if (unlikely(r != 0)) {
-		if (r != -ERESTARTSYS)
-			dev_err(bo->rdev->dev, "%p reserve failed for wait\n", bo);
+	if (unlikely(r != 0))
 		return r;
-	}
 	spin_lock(&bo->tbo.lock);
 	if (mem_type)
 		*mem_type = bo->tbo.mem.mem_type;
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index cc05b23..51d5f7b 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -693,6 +693,7 @@
 	rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 	rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	base = RREG32_MC(R_000004_MC_FB_LOCATION);
 	base = G_000004_MC_FB_START(base) << 16;
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 3e3f757..4dc2a87 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -157,6 +157,7 @@
 	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
 	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	base = RREG32_MC(R_000100_MCCFG_FB_LOCATION);
 	base = G_000100_MC_FB_START(base) << 16;
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index bfa59db..9490da7 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -267,6 +267,7 @@
  */
 void r700_cp_stop(struct radeon_device *rdev)
 {
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	WREG32(CP_ME_CNTL, (CP_ME_HALT | CP_PFP_HALT));
 }
 
@@ -992,6 +993,7 @@
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index cb4cf7e..db809e0 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -442,6 +442,43 @@
 }
 
 /**
+ * Call bo::reserved and with the lru lock held.
+ * Will release GPU memory type usage on destruction.
+ * This is the place to put in driver specific hooks.
+ * Will release the bo::reserved lock and the
+ * lru lock on exit.
+ */
+
+static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
+{
+	struct ttm_bo_global *glob = bo->glob;
+
+	if (bo->ttm) {
+
+		/**
+		 * Release the lru_lock, since we don't want to have
+		 * an atomic requirement on ttm_tt[unbind|destroy].
+		 */
+
+		spin_unlock(&glob->lru_lock);
+		ttm_tt_unbind(bo->ttm);
+		ttm_tt_destroy(bo->ttm);
+		bo->ttm = NULL;
+		spin_lock(&glob->lru_lock);
+	}
+
+	if (bo->mem.mm_node) {
+		drm_mm_put_block(bo->mem.mm_node);
+		bo->mem.mm_node = NULL;
+	}
+
+	atomic_set(&bo->reserved, 0);
+	wake_up_all(&bo->event_queue);
+	spin_unlock(&glob->lru_lock);
+}
+
+
+/**
  * If bo idle, remove from delayed- and lru lists, and unref.
  * If not idle, and already on delayed list, do nothing.
  * If not idle, and not on delayed list, put on delayed list,
@@ -456,6 +493,7 @@
 	int ret;
 
 	spin_lock(&bo->lock);
+retry:
 	(void) ttm_bo_wait(bo, false, false, !remove_all);
 
 	if (!bo->sync_obj) {
@@ -464,31 +502,52 @@
 		spin_unlock(&bo->lock);
 
 		spin_lock(&glob->lru_lock);
-		put_count = ttm_bo_del_from_lru(bo);
+		ret = ttm_bo_reserve_locked(bo, false, !remove_all, false, 0);
 
-		ret = ttm_bo_reserve_locked(bo, false, false, false, 0);
-		BUG_ON(ret);
-		if (bo->ttm)
-			ttm_tt_unbind(bo->ttm);
+		/**
+		 * Someone else has the object reserved. Bail and retry.
+		 */
+
+		if (unlikely(ret == -EBUSY)) {
+			spin_unlock(&glob->lru_lock);
+			spin_lock(&bo->lock);
+			goto requeue;
+		}
+
+		/**
+		 * We can re-check for sync object without taking
+		 * the bo::lock since setting the sync object requires
+		 * also bo::reserved. A busy object at this point may
+		 * be caused by another thread starting an accelerated
+		 * eviction.
+		 */
+
+		if (unlikely(bo->sync_obj)) {
+			atomic_set(&bo->reserved, 0);
+			wake_up_all(&bo->event_queue);
+			spin_unlock(&glob->lru_lock);
+			spin_lock(&bo->lock);
+			if (remove_all)
+				goto retry;
+			else
+				goto requeue;
+		}
+
+		put_count = ttm_bo_del_from_lru(bo);
 
 		if (!list_empty(&bo->ddestroy)) {
 			list_del_init(&bo->ddestroy);
 			++put_count;
 		}
-		if (bo->mem.mm_node) {
-			drm_mm_put_block(bo->mem.mm_node);
-			bo->mem.mm_node = NULL;
-		}
-		spin_unlock(&glob->lru_lock);
 
-		atomic_set(&bo->reserved, 0);
+		ttm_bo_cleanup_memtype_use(bo);
 
 		while (put_count--)
 			kref_put(&bo->list_kref, ttm_bo_ref_bug);
 
 		return 0;
 	}
-
+requeue:
 	spin_lock(&glob->lru_lock);
 	if (list_empty(&bo->ddestroy)) {
 		void *sync_obj = bo->sync_obj;
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index f7bd261..f2de3be 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -677,6 +677,11 @@
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
 
+	/*
+	 * register OF I2C devices
+	 */
+	of_i2c_register_devices(&cpm->adap);
+
 	return 0;
 out_shut:
 	cpm_i2c_shutdown(cpm);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 43ca32f..89eedf4 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -761,6 +761,9 @@
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
+	/* Now register all the child nodes */
+	of_i2c_register_devices(adap);
+
 	return 0;
 
 error_cleanup:
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a1c419a..b74e6dc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -632,6 +632,7 @@
 		dev_err(i2c->dev, "failed to add adapter\n");
 		goto fail_add;
 	}
+	of_i2c_register_devices(&i2c->adap);
 
 	return result;
 
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index bbd7760..29933f8 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -71,8 +71,8 @@
 
 static int pca_isa_waitforcompletion(void *pd)
 {
-	long ret = ~0;
 	unsigned long timeout;
+	long ret;
 
 	if (irq > -1) {
 		ret = wait_event_timeout(pca_wait,
@@ -81,11 +81,15 @@
 	} else {
 		/* Do polling */
 		timeout = jiffies + pca_isa_ops.timeout;
-		while (((pca_isa_readbyte(pd, I2C_PCA_CON)
-				& I2C_PCA_CON_SI) == 0)
-				&& (ret = time_before(jiffies, timeout)))
+		do {
+			ret = time_before(jiffies, timeout);
+			if (pca_isa_readbyte(pd, I2C_PCA_CON)
+					& I2C_PCA_CON_SI)
+				break;
 			udelay(100);
+		} while (ret);
 	}
+
 	return ret > 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index ef5c784..5f6d7f8 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -80,8 +80,8 @@
 static int i2c_pca_pf_waitforcompletion(void *pd)
 {
 	struct i2c_pca_pf_data *i2c = pd;
-	long ret = ~0;
 	unsigned long timeout;
+	long ret;
 
 	if (i2c->irq) {
 		ret = wait_event_timeout(i2c->wait,
@@ -90,10 +90,13 @@
 	} else {
 		/* Do polling */
 		timeout = jiffies + i2c->adap.timeout;
-		while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
-				& I2C_PCA_CON_SI) == 0)
-				&& (ret = time_before(jiffies, timeout)))
+		do {
+			ret = time_before(jiffies, timeout);
+			if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+					& I2C_PCA_CON_SI)
+				break;
 			udelay(100);
+		} while (ret);
 	}
 
 	return ret > 0;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 6649176..bea4c50 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -32,7 +32,6 @@
 #include <linux/init.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
@@ -197,11 +196,12 @@
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->suspend ? pm->suspend(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->suspend ? pm->suspend(dev) : 0;
+	}
 
 	return i2c_legacy_suspend(dev, PMSG_SUSPEND);
 }
@@ -216,12 +216,6 @@
 	else
 		ret = i2c_legacy_resume(dev);
 
-	if (!ret) {
-		pm_runtime_disable(dev);
-		pm_runtime_set_active(dev);
-		pm_runtime_enable(dev);
-	}
-
 	return ret;
 }
 
@@ -229,11 +223,12 @@
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->freeze ? pm->freeze(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->freeze ? pm->freeze(dev) : 0;
+	}
 
 	return i2c_legacy_suspend(dev, PMSG_FREEZE);
 }
@@ -242,11 +237,12 @@
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->thaw ? pm->thaw(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->thaw ? pm->thaw(dev) : 0;
+	}
 
 	return i2c_legacy_resume(dev);
 }
@@ -255,11 +251,12 @@
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->poweroff ? pm->poweroff(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->poweroff ? pm->poweroff(dev) : 0;
+	}
 
 	return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
 }
@@ -876,9 +873,6 @@
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
 
-	/* Register devices from the device tree */
-	of_i2c_register_devices(adap);
-
 	/* Notify drivers */
 	mutex_lock(&core_lock);
 	bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 0906fc5..c37ef64 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -157,13 +157,13 @@
 	{ /* MWAIT C5 */ },
 	{ /* MWAIT C6 */
 		.name = "ATM-C6",
-		.desc = "MWAIT 0x40",
-		.driver_data = (void *) 0x40,
+		.desc = "MWAIT 0x52",
+		.driver_data = (void *) 0x52,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
-		.exit_latency = 200,
+		.exit_latency = 140,
 		.power_usage = 150,
-		.target_residency = 800,
-		.enter = NULL },	/* disabled */
+		.target_residency = 560,
+		.enter = &intel_idle },
 };
 
 /**
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index d85bd8a..22239e9 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -483,6 +483,9 @@
 
 	memcpy(joydev->abspam, abspam, len);
 
+	for (i = 0; i < joydev->nabs; i++)
+		joydev->absmap[joydev->abspam[i]] = i;
+
  out:
 	kfree(abspam);
 	return retval;
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 0d4266a..3606985 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -404,6 +404,13 @@
 		retval = uinput_validate_absbits(dev);
 		if (retval < 0)
 			goto exit;
+		if (test_bit(ABS_MT_SLOT, dev->absbit)) {
+			int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
+			input_mt_create_slots(dev, nslot);
+			input_set_events_per_packet(dev, 6 * nslot);
+		} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
+			input_set_events_per_packet(dev, 60);
+		}
 	}
 
 	udev->state = UIST_SETUP_COMPLETE;
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 42ba369..b35876e 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -103,27 +103,26 @@
 static int wacom_open(struct input_dev *dev)
 {
 	struct wacom *wacom = input_get_drvdata(dev);
+	int retval = 0;
+
+	if (usb_autopm_get_interface(wacom->intf) < 0)
+		return -EIO;
 
 	mutex_lock(&wacom->lock);
 
-	wacom->irq->dev = wacom->usbdev;
-
-	if (usb_autopm_get_interface(wacom->intf) < 0) {
-		mutex_unlock(&wacom->lock);
-		return -EIO;
-	}
-
 	if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
-		usb_autopm_put_interface(wacom->intf);
-		mutex_unlock(&wacom->lock);
-		return -EIO;
+		retval = -EIO;
+		goto out;
 	}
 
 	wacom->open = true;
 	wacom->intf->needs_remote_wakeup = 1;
 
+out:
 	mutex_unlock(&wacom->lock);
-	return 0;
+	if (retval)
+		usb_autopm_put_interface(wacom->intf);
+	return retval;
 }
 
 static void wacom_close(struct input_dev *dev)
@@ -135,6 +134,8 @@
 	wacom->open = false;
 	wacom->intf->needs_remote_wakeup = 0;
 	mutex_unlock(&wacom->lock);
+
+	usb_autopm_put_interface(wacom->intf);
 }
 
 static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 6e29bad..47fd7a0 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -442,8 +442,10 @@
 	/* general pen packet */
 	if ((data[1] & 0xb8) == 0xa0) {
 		t = (data[6] << 2) | ((data[7] >> 6) & 3);
-		if (features->type >= INTUOS4S && features->type <= INTUOS4L)
+		if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+		    features->type == WACOM_21UX2) {
 			t = (t << 1) | (data[1] & 1);
+		}
 		input_report_abs(input, ABS_PRESSURE, t);
 		input_report_abs(input, ABS_TILT_X,
 				((data[7] << 1) & 0x7e) | (data[8] >> 7));
diff --git a/drivers/isdn/sc/interrupt.c b/drivers/isdn/sc/interrupt.c
index 485be8b..f0225bc 100644
--- a/drivers/isdn/sc/interrupt.c
+++ b/drivers/isdn/sc/interrupt.c
@@ -112,11 +112,19 @@
 			}
 			else if(callid>=0x0000 && callid<=0x7FFF)
 			{
+				int len;
+
 				pr_debug("%s: Got Incoming Call\n",
 						sc_adapter[card]->devicename);
-				strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4]));
-				strcpy(setup.eazmsn,
-					sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn);
+				len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
+						sizeof(setup.phone));
+				if (len >= sizeof(setup.phone))
+					continue;
+				len = strlcpy(setup.eazmsn,
+						sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+						sizeof(setup.eazmsn));
+				if (len >= sizeof(setup.eazmsn))
+					continue;
 				setup.si1 = 7;
 				setup.si2 = 0;
 				setup.plan = 0;
@@ -176,7 +184,9 @@
 		 * Handle a GetMyNumber Rsp
 		 */
 		if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){
-			strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array);
+			strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+				rcvmsg.msg_data.byte_array,
+				sizeof(rcvmsg.msg_data.byte_array));
 			continue;
 		}
 			
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index ed4900a..e4fb58d 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1000,10 +1000,11 @@
 				page = bitmap->sb_page;
 				offset = sizeof(bitmap_super_t);
 				if (!file)
-					read_sb_page(bitmap->mddev,
-						     bitmap->mddev->bitmap_info.offset,
-						     page,
-						     index, count);
+					page = read_sb_page(
+						bitmap->mddev,
+						bitmap->mddev->bitmap_info.offset,
+						page,
+						index, count);
 			} else if (file) {
 				page = read_page(file, index, bitmap, count);
 				offset = 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index ad83a4d..0b830bb 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1839,7 +1839,9 @@
 
 		/* take from bio_init */
 		bio->bi_next = NULL;
+		bio->bi_flags &= ~(BIO_POOL_MASK-1);
 		bio->bi_flags |= 1 << BIO_UPTODATE;
+		bio->bi_comp_cpu = -1;
 		bio->bi_rw = READ;
 		bio->bi_vcnt = 0;
 		bio->bi_idx = 0;
@@ -1912,7 +1914,7 @@
 			    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
 				break;
 			BUG_ON(sync_blocks < (PAGE_SIZE>>9));
-			if (len > (sync_blocks<<9))
+			if ((len >> 9) > sync_blocks)
 				len = sync_blocks<<9;
 		}
 
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 7e82a9d..7961d59 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -319,7 +319,7 @@
 	 * a keyup event might follow immediately after the keydown.
 	 */
 	spin_lock_irqsave(&ir->keylock, flags);
-	if (time_is_after_eq_jiffies(ir->keyup_jiffies))
+	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
 		ir_keyup(ir);
 	spin_unlock_irqrestore(&ir->keylock, flags);
 }
@@ -510,6 +510,13 @@
 		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
 			" in raw mode" : "");
 
+	/*
+	 * Default delay of 250ms is too short for some protocols, expecially
+	 * since the timeout is currently set to 250ms. Increase it to 500ms,
+	 * to avoid wrong repetition of the keycodes.
+	 */
+	input_dev->rep[REP_DELAY] = 500;
+
 	return 0;
 
 out_event:
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
index 77b5946..e63f757 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -267,7 +267,7 @@
 			features |= LIRC_CAN_SET_SEND_CARRIER;
 
 		if (ir_dev->props->s_tx_duty_cycle)
-			features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
+			features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
 	}
 
 	if (ir_dev->props->s_rx_carrier_range)
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 43094e7..8e0e1b1 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -279,9 +279,11 @@
 			"rc%u",  (unsigned int)ir->devno);
 
 	if (IS_ERR(ir->raw->thread)) {
+		int ret = PTR_ERR(ir->raw->thread);
+
 		kfree(ir->raw);
 		ir->raw = NULL;
-		return PTR_ERR(ir->raw->thread);
+		return ret;
 	}
 
 	mutex_lock(&ir_raw_handler_lock);
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index 96dafc4..46d4246 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -67,13 +67,14 @@
 	char *tmp = buf;
 	int i;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
 		enabled = ir_dev->rc_tab.ir_type;
 		allowed = ir_dev->props->allowed_protos;
-	} else {
+	} else if (ir_dev->raw) {
 		enabled = ir_dev->raw->enabled_protocols;
 		allowed = ir_raw_get_allowed_protocols();
-	}
+	} else
+		return sprintf(tmp, "[builtin]\n");
 
 	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
 		   (long long)allowed,
@@ -121,10 +122,14 @@
 	int rc, i, count = 0;
 	unsigned long flags;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
 		type = ir_dev->rc_tab.ir_type;
-	else
+	else if (ir_dev->raw)
 		type = ir_dev->raw->enabled_protocols;
+	else {
+		IR_dprintk(1, "Protocol switching not supported\n");
+		return -EINVAL;
+	}
 
 	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
 		if (!*tmp)
@@ -185,7 +190,7 @@
 		}
 	}
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
 		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
 		ir_dev->rc_tab.ir_type = type;
 		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
diff --git a/drivers/media/IR/keymaps/rc-rc6-mce.c b/drivers/media/IR/keymaps/rc-rc6-mce.c
index 64264f7..39557ad 100644
--- a/drivers/media/IR/keymaps/rc-rc6-mce.c
+++ b/drivers/media/IR/keymaps/rc-rc6-mce.c
@@ -19,6 +19,7 @@
 
 	{ 0x800f0416, KEY_PLAY },
 	{ 0x800f0418, KEY_PAUSE },
+	{ 0x800f046e, KEY_PLAYPAUSE },
 	{ 0x800f0419, KEY_STOP },
 	{ 0x800f0417, KEY_RECORD },
 
@@ -37,6 +38,8 @@
 	{ 0x800f0411, KEY_VOLUMEDOWN },
 	{ 0x800f0412, KEY_CHANNELUP },
 	{ 0x800f0413, KEY_CHANNELDOWN },
+	{ 0x800f043a, KEY_BRIGHTNESSUP },
+	{ 0x800f0480, KEY_BRIGHTNESSDOWN },
 
 	{ 0x800f0401, KEY_NUMERIC_1 },
 	{ 0x800f0402, KEY_NUMERIC_2 },
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
index ac6bb2c..bc620e1 100644
--- a/drivers/media/IR/mceusb.c
+++ b/drivers/media/IR/mceusb.c
@@ -120,6 +120,10 @@
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
 	/* Philips eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
 	/* Realtek MCE IR Receiver */
 	{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
 	/* SMK/Toshiba G83C0004D410 */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index fe81834..48397f1 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -673,9 +673,6 @@
 			else
 				dev->props.rc.core.bulk_mode = false;
 
-			/* Need a higher delay, to avoid wrong repeat */
-			dev->rc_input_dev->rep[REP_DELAY] = 500;
-
 			dib0700_rc_setup(dev);
 
 			return 0;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index f634d2e..e06acd1 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -940,6 +940,58 @@
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.enable_current_mirror = 1,
+	.disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &dib7770p_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		return -ENODEV;
+	}
+
+	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+		&dib7770p_dib7000p_config);
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
 /* DIB807x generic */
 static struct dibx000_agc_config dib807x_agc_config[2] = {
 	{
@@ -1781,7 +1833,7 @@
 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
-	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
+	{ USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
 	{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
 /* 65 */{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
@@ -2406,7 +2458,7 @@
 				.pid_filter_count = 32,
 				.pid_filter       = stk70x0p_pid_filter,
 				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070p_frontend_attach,
+				.frontend_attach  = stk7770p_frontend_attach,
 				.tuner_attach     = dib7770p_tuner_attach,
 
 				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index 6b22ec6..f896337 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -483,9 +483,7 @@
 		}
 	}
 	kfree(p);
-	if (fw) {
-		release_firmware(fw);
-	}
+	release_firmware(fw);
 	return ret;
 }
 
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 2e28b97..3aed0d4 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -260,6 +260,9 @@
 
 //	dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
 
+	reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
+	reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
+
 	dib7000p_write_word(state, 908, reg_908);
 	dib7000p_write_word(state, 909, reg_909);
 }
@@ -778,7 +781,10 @@
 		default:
 		case GUARD_INTERVAL_1_32: value *= 1; break;
 	}
-	state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
+	if (state->cfg.diversity_delay == 0)
+		state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
+	else
+		state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo
 
 	/* deactive the possibility of diversity reception if extended interleaver */
 	state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
index 805dd13..da17345 100644
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -33,6 +33,11 @@
 	int (*agc_control) (struct dvb_frontend *, u8 before);
 
 	u8 output_mode;
+	u8 disable_sample_and_hold : 1;
+
+	u8 enable_current_mirror : 1;
+	u8 diversity_delay;
+
 };
 
 #define DEFAULT_DIB7000P_I2C_ADDRESS 18
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index d93468c..ff3b0fa 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1098,33 +1098,26 @@
  *
  * @return pointer to descriptor on success, NULL on error.
  */
-struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+
+struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
 {
 	struct smscore_buffer_t *cb = NULL;
 	unsigned long flags;
 
-	DEFINE_WAIT(wait);
-
 	spin_lock_irqsave(&coredev->bufferslock, flags);
-
-	/* This function must return a valid buffer, since the buffer list is
-	 * finite, we check that there is an available buffer, if not, we wait
-	 * until such buffer become available.
-	 */
-
-	prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
-	if (list_empty(&coredev->buffers)) {
-		spin_unlock_irqrestore(&coredev->bufferslock, flags);
-		schedule();
-		spin_lock_irqsave(&coredev->bufferslock, flags);
+	if (!list_empty(&coredev->buffers)) {
+		cb = (struct smscore_buffer_t *) coredev->buffers.next;
+		list_del(&cb->entry);
 	}
-
-	finish_wait(&coredev->buffer_mng_waitq, &wait);
-
-	cb = (struct smscore_buffer_t *) coredev->buffers.next;
-	list_del(&cb->entry);
-
 	spin_unlock_irqrestore(&coredev->bufferslock, flags);
+	return cb;
+}
+
+struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+{
+	struct smscore_buffer_t *cb = NULL;
+
+	wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev)));
 
 	return cb;
 }
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index 67a4ec8..4ce541a 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -395,7 +395,7 @@
 	radio->registers[POWERCFG] = POWERCFG_ENABLE;
 	if (si470x_set_register(radio, POWERCFG) < 0) {
 		retval = -EIO;
-		goto err_all;
+		goto err_video;
 	}
 	msleep(110);
 
diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/video/cx231xx/Makefile
index 755dd0c..6f2b573 100644
--- a/drivers/media/video/cx231xx/Makefile
+++ b/drivers/media/video/cx231xx/Makefile
@@ -11,4 +11,5 @@
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb
 
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 6bdc0ef..f2a4900 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -32,6 +32,7 @@
 #include <media/v4l2-chip-ident.h>
 
 #include <media/cx25840.h>
+#include "dvb-usb-ids.h"
 #include "xc5000.h"
 
 #include "cx231xx.h"
@@ -175,6 +176,8 @@
 	 .driver_info = CX231XX_BOARD_CNXT_RDE_250},
 	{USB_DEVICE(0x0572, 0x58A1),
 	 .driver_info = CX231XX_BOARD_CNXT_RDU_250},
+	{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
+	 .driver_info = CX231XX_BOARD_UNKNOWN},
 	{},
 };
 
@@ -226,14 +229,16 @@
 		     dev->board.name, dev->model);
 
 	/* set the direction for GPIO pins */
-	cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
-	cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
-	cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
+	if (dev->board.tuner_gpio) {
+		cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
+		cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
+		cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
 
-	/* request some modules if any required */
+		/* request some modules if any required */
 
-	/* reset the Tuner */
-	cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+		/* reset the Tuner */
+		cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+	}
 
 	/* set the mode to Analog mode initially */
 	cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 86ca8c2..f5a3e74 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1996,7 +1996,7 @@
 
 		state->volume = v4l2_ctrl_new_std(&state->hdl,
 			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
-			0, 65335, 65535 / 100, default_volume);
+			0, 65535, 65535 / 100, default_volume);
 		state->mute = v4l2_ctrl_new_std(&state->hdl,
 			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
 			0, 1, 1, 0);
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 99dbae1..0fa85cb 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -17,7 +17,7 @@
 
 config VIDEO_CX88_ALSA
 	tristate "Conexant 2388x DMA audio support"
-	depends on VIDEO_CX88 && SND && EXPERIMENTAL
+	depends on VIDEO_CX88 && SND
 	select SND_PCM
 	---help---
 	  This is a video4linux driver for direct (DMA) audio on
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index b984610..78abc1c 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -223,6 +223,7 @@
 		usb_rcvintpipe(dev, ep->bEndpointAddress),
 		buffer, buffer_len,
 		int_irq, (void *)gspca_dev, interval);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	gspca_dev->int_urb = urb;
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret < 0) {
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 83a718f..9052d57 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -2357,8 +2357,7 @@
 			    (data[33] << 10);
 		avg_lum >>= 9;
 		atomic_set(&sd->avg_lum, avg_lum);
-		gspca_frame_add(gspca_dev, LAST_PACKET,
-				data, len);
+		gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
 		return;
 	}
 	if (gspca_dev->last_packet_type == LAST_PACKET) {
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index be03a71..f0316d0 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -466,6 +466,8 @@
 			struct fb_vblank vblank;
 			u32 trace;
 
+			memset(&vblank, 0, sizeof(struct fb_vblank));
+
 			vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
 					FB_VBLANK_HAVE_VSYNC;
 			trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 4525335..a7210d9 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -239,7 +239,7 @@
 		return -EFAULT;
 	}
 
-	if (in_buf->vb.size < out_buf->vb.size) {
+	if (in_buf->vb.size > out_buf->vb.size) {
 		v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n");
 		return -EINVAL;
 	}
@@ -1014,6 +1014,7 @@
 	v4l2_m2m_release(dev->m2m_dev);
 	del_timer_sync(&dev->timer);
 	video_unregister_device(dev->vfd);
+	video_device_release(dev->vfd);
 	v4l2_device_unregister(&dev->v4l2_dev);
 	kfree(dev);
 
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 758a4db..c71af4e 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -447,6 +447,9 @@
 	dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
 		__func__, rect.left, rect.top, rect.width, rect.height);
 
+	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
 	ret = mt9m111_make_rect(client, &rect);
 	if (!ret)
 		mt9m111->rect = rect;
@@ -466,12 +469,14 @@
 
 static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 {
+	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
 	a->bounds.left			= MT9M111_MIN_DARK_COLS;
 	a->bounds.top			= MT9M111_MIN_DARK_ROWS;
 	a->bounds.width			= MT9M111_MAX_WIDTH;
 	a->bounds.height		= MT9M111_MAX_HEIGHT;
 	a->defrect			= a->bounds;
-	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	a->pixelaspect.numerator	= 1;
 	a->pixelaspect.denominator	= 1;
 
@@ -487,6 +492,7 @@
 	mf->width	= mt9m111->rect.width;
 	mf->height	= mt9m111->rect.height;
 	mf->code	= mt9m111->fmt->code;
+	mf->colorspace	= mt9m111->fmt->colorspace;
 	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index e7cd23c..b48473c 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -402,9 +402,6 @@
 		if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC)
 			return -EINVAL;
 		break;
-	case 0:
-		/* No format change, only geometry */
-		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 66ff174..b6ea672 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -378,6 +378,9 @@
 
 	spin_lock_irqsave(&pcdev->lock, flags);
 
+	if (*fb_active == NULL)
+		goto out;
+
 	vb = &(*fb_active)->vb;
 	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
@@ -402,6 +405,7 @@
 
 	*fb_active = buf;
 
+out:
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index 1b992b8..55ea914 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -513,7 +513,7 @@
 			if (ret >= 0) {
 				ret = pvr2_ctrl_range_check(cptr,*valptr);
 			}
-			if (maskptr) *maskptr = ~0;
+			*maskptr = ~0;
 		} else if (cptr->info->type == pvr2_ctl_bool) {
 			ret = parse_token(ptr,len,valptr,boolNames,
 					  ARRAY_SIZE(boolNames));
@@ -522,7 +522,7 @@
 			} else if (ret == 0) {
 				*valptr = (*valptr & 1) ? !0 : 0;
 			}
-			if (maskptr) *maskptr = 1;
+			*maskptr = 1;
 		} else if (cptr->info->type == pvr2_ctl_enum) {
 			ret = parse_token(
 				ptr,len,valptr,
@@ -531,7 +531,7 @@
 			if (ret >= 0) {
 				ret = pvr2_ctrl_range_check(cptr,*valptr);
 			}
-			if (maskptr) *maskptr = ~0;
+			*maskptr = ~0;
 		} else if (cptr->info->type == pvr2_ctl_bitmask) {
 			ret = parse_tlist(
 				ptr,len,maskptr,valptr,
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index b151c7b..6961c55 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -393,6 +393,37 @@
 	dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
 }
 
+static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f)
+{
+	struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+
+	f->dma_offset.y_h = f->offs_h;
+	if (!variant->pix_hoff)
+		f->dma_offset.y_h *= (f->fmt->depth >> 3);
+
+	f->dma_offset.y_v = f->offs_v;
+
+	f->dma_offset.cb_h = f->offs_h;
+	f->dma_offset.cb_v = f->offs_v;
+
+	f->dma_offset.cr_h = f->offs_h;
+	f->dma_offset.cr_v = f->offs_v;
+
+	if (!variant->pix_hoff) {
+		if (f->fmt->planes_cnt == 3) {
+			f->dma_offset.cb_h >>= 1;
+			f->dma_offset.cr_h >>= 1;
+		}
+		if (f->fmt->color == S5P_FIMC_YCBCR420) {
+			f->dma_offset.cb_v >>= 1;
+			f->dma_offset.cr_v >>= 1;
+		}
+	}
+
+	dbg("in_offset: color= %d, y_h= %d, y_v= %d",
+	    f->fmt->color, f->dma_offset.y_h, f->dma_offset.y_v);
+}
+
 /**
  * fimc_prepare_config - check dimensions, operation and color mode
  *			 and pre-calculate offset and the scaling coefficients.
@@ -406,7 +437,6 @@
 {
 	struct fimc_frame *s_frame, *d_frame;
 	struct fimc_vid_buffer *buf = NULL;
-	struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
 	int ret = 0;
 
 	s_frame = &ctx->s_frame;
@@ -419,61 +449,16 @@
 			swap(d_frame->width, d_frame->height);
 		}
 
-		/* Prepare the output offset ratios for scaler. */
-		d_frame->dma_offset.y_h = d_frame->offs_h;
-		if (!variant->pix_hoff)
-			d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
+		/* Prepare the DMA offset ratios for scaler. */
+		fimc_prepare_dma_offset(ctx, &ctx->s_frame);
+		fimc_prepare_dma_offset(ctx, &ctx->d_frame);
 
-		d_frame->dma_offset.y_v = d_frame->offs_v;
-
-		d_frame->dma_offset.cb_h = d_frame->offs_h;
-		d_frame->dma_offset.cb_v = d_frame->offs_v;
-
-		d_frame->dma_offset.cr_h = d_frame->offs_h;
-		d_frame->dma_offset.cr_v = d_frame->offs_v;
-
-		if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
-			d_frame->dma_offset.cb_h >>= 1;
-			d_frame->dma_offset.cb_v >>= 1;
-			d_frame->dma_offset.cr_h >>= 1;
-			d_frame->dma_offset.cr_v >>= 1;
-		}
-
-		dbg("out offset: color= %d, y_h= %d, y_v= %d",
-			d_frame->fmt->color,
-			d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
-
-		/* Prepare the input offset ratios for scaler. */
-		s_frame->dma_offset.y_h = s_frame->offs_h;
-		if (!variant->pix_hoff)
-			s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
-		s_frame->dma_offset.y_v = s_frame->offs_v;
-
-		s_frame->dma_offset.cb_h = s_frame->offs_h;
-		s_frame->dma_offset.cb_v = s_frame->offs_v;
-
-		s_frame->dma_offset.cr_h = s_frame->offs_h;
-		s_frame->dma_offset.cr_v = s_frame->offs_v;
-
-		if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
-			s_frame->dma_offset.cb_h >>= 1;
-			s_frame->dma_offset.cb_v >>= 1;
-			s_frame->dma_offset.cr_h >>= 1;
-			s_frame->dma_offset.cr_v >>= 1;
-		}
-
-		dbg("in offset: color= %d, y_h= %d, y_v= %d",
-			s_frame->fmt->color, s_frame->dma_offset.y_h,
-			s_frame->dma_offset.y_v);
-
-		fimc_set_yuv_order(ctx);
-
-		/* Check against the scaler ratio. */
 		if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
 		    s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
 			err("out of scaler range");
 			return -EINVAL;
 		}
+		fimc_set_yuv_order(ctx);
 	}
 
 	/* Input DMA mode is not allowed when the scaler is disabled. */
@@ -822,7 +807,8 @@
 	} else {
 		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
 			 "Wrong buffer/video queue type (%d)\n", f->type);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto s_fmt_out;
 	}
 
 	pix = &f->fmt.pix;
@@ -1414,8 +1400,10 @@
 	}
 
 	fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
-	if (!fimc->work_queue)
+	if (!fimc->work_queue) {
+		ret = -ENOMEM;
 		goto err_irq;
+	}
 
 	ret = fimc_register_m2m_device(fimc);
 	if (ret)
@@ -1492,6 +1480,7 @@
 };
 
 static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+	.pix_hoff	= 1,
 	.has_inp_rot	= 1,
 	.has_out_rot	= 1,
 	.min_inp_pixsize = 16,
@@ -1506,6 +1495,7 @@
 };
 
 static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+	.pix_hoff	 = 1,
 	.min_inp_pixsize = 16,
 	.min_out_pixsize = 32,
 
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index ec697fc..bb8d83d 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4323,13 +4323,13 @@
 	},
 	[SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = {
 		/*       Beholder Intl. Ltd. 2008      */
-		/*Dmitry Belimov <d.belimov@gmail.com> */
-		.name           = "Beholder BeholdTV Columbus TVFM",
+		/* Dmitry Belimov <d.belimov@gmail.com> */
+		.name           = "Beholder BeholdTV Columbus TV/FM",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_ALPS_TSBE5_PAL,
-		.radio_type     = UNSET,
-		.tuner_addr     = ADDR_UNSET,
-		.radio_addr     = ADDR_UNSET,
+		.radio_type     = TUNER_TEA5767,
+		.tuner_addr     = 0xc2 >> 1,
+		.radio_addr     = 0xc0 >> 1,
 		.tda9887_conf   = TDA9887_PRESENT,
 		.gpiomask       = 0x000A8004,
 		.inputs         = {{
diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c
index 5713f3a..ddd25d3 100644
--- a/drivers/media/video/saa7164/saa7164-buffer.c
+++ b/drivers/media/video/saa7164/saa7164-buffer.c
@@ -136,10 +136,11 @@
 int saa7164_buffer_dealloc(struct saa7164_tsport *port,
 	struct saa7164_buffer *buf)
 {
-	struct saa7164_dev *dev = port->dev;
+	struct saa7164_dev *dev;
 
-	if ((buf == 0) || (port == 0))
+	if (!buf || !port)
 		return SAA_ERR_BAD_PARAMETER;
+	dev = port->dev;
 
 	dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf);
 
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 8bdd940..2ac85d8 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -486,6 +486,12 @@
 			    max(frame->dwFrameInterval[0],
 				frame->dwDefaultFrameInterval));
 
+		if (dev->quirks & UVC_QUIRK_RESTRICT_FRAME_RATE) {
+			frame->bFrameIntervalType = 1;
+			frame->dwFrameInterval[0] =
+				frame->dwDefaultFrameInterval;
+		}
+
 		uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n",
 			frame->wWidth, frame->wHeight,
 			10000000/frame->dwDefaultFrameInterval,
@@ -2026,6 +2032,15 @@
 	  .bInterfaceClass	= USB_CLASS_VENDOR_SPEC,
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0 },
+	/* Chicony CNF7129 (Asus EEE 100HE) */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x04f2,
+	  .idProduct		= 0xb071,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_RESTRICT_FRAME_RATE },
 	/* Alcor Micro AU3820 (Future Boy PC USB Webcam) */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
@@ -2091,6 +2106,15 @@
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX
 				| UVC_QUIRK_PROBE_DEF },
+	/* IMC Networks (Medion Akoya) */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x13d3,
+	  .idProduct		= 0x5103,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
 	/* Syntek (HP Spartan) */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index bdacf3b..892e0e5 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -182,6 +182,7 @@
 #define UVC_QUIRK_IGNORE_SELECTOR_UNIT	0x00000020
 #define UVC_QUIRK_FIX_BANDWIDTH		0x00000080
 #define UVC_QUIRK_PROBE_DEF		0x00000100
+#define UVC_QUIRK_RESTRICT_FRAME_RATE	0x00000200
 
 /* Format flags */
 #define UVC_FMT_FLAG_COMPRESSED		0x00000001
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 372b87e..6ff9e4b 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -393,8 +393,10 @@
 	}
 
 	/* read() method */
-	dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
-	mem->vaddr = NULL;
+	if (mem->vaddr) {
+		dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
+		mem->vaddr = NULL;
+	}
 }
 EXPORT_SYMBOL_GPL(videobuf_dma_contig_free);
 
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 06f9a9c..2ad0bc2 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -94,7 +94,7 @@
  * must free the memory.
  */
 static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
-						int nr_pages, int offset)
+					int nr_pages, int offset, size_t size)
 {
 	struct scatterlist *sglist;
 	int i;
@@ -110,12 +110,14 @@
 		/* DMA to highmem pages might not work */
 		goto highmem;
 	sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
+	size -= PAGE_SIZE - offset;
 	for (i = 1; i < nr_pages; i++) {
 		if (NULL == pages[i])
 			goto nopage;
 		if (PageHighMem(pages[i]))
 			goto highmem;
-		sg_set_page(&sglist[i], pages[i], PAGE_SIZE, 0);
+		sg_set_page(&sglist[i], pages[i], min(PAGE_SIZE, size), 0);
+		size -= min(PAGE_SIZE, size);
 	}
 	return sglist;
 
@@ -170,7 +172,8 @@
 
 	first = (data          & PAGE_MASK) >> PAGE_SHIFT;
 	last  = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT;
-	dma->offset   = data & ~PAGE_MASK;
+	dma->offset = data & ~PAGE_MASK;
+	dma->size = size;
 	dma->nr_pages = last-first+1;
 	dma->pages = kmalloc(dma->nr_pages * sizeof(struct page *), GFP_KERNEL);
 	if (NULL == dma->pages)
@@ -252,7 +255,7 @@
 
 	if (dma->pages) {
 		dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
-						   dma->offset);
+						   dma->offset, dma->size);
 	}
 	if (dma->vaddr) {
 		dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr,
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index 714c6b4..d5f3a3f 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -190,7 +190,6 @@
 
 	ddata = i2c_get_clientdata(client);
 	sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
-	i2c_set_clientdata(client, NULL);
 	kfree(ddata);
 
 	return 0;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2cc81a5..5db667c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2428,7 +2428,7 @@
 
 config MV643XX_ETH
 	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on MV64X60 || PPC32 || PLAT_ORION
+	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
 	select INET_LRO
 	select PHYLIB
 	help
@@ -2803,7 +2803,7 @@
 
 config PASEMI_MAC
 	tristate "PA Semi 1/10Gbit MAC"
-	depends on PPC_PASEMI && PCI
+	depends on PPC_PASEMI && PCI && INET
 	select PHYLIB
 	select INET_LRO
 	help
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 1e620e2..efeffdf 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -2170,8 +2170,6 @@
 	dev->irq = sdev->irq;
 	SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
 
-	netif_carrier_off(dev);
-
 	err = ssb_bus_powerup(sdev->bus, 0);
 	if (err) {
 		dev_err(sdev->dev,
@@ -2213,6 +2211,8 @@
 		goto err_out_powerdown;
 	}
 
+	netif_carrier_off(dev);
+
 	ssb_set_drvdata(sdev, dev);
 
 	/* Chip reset provides power to the b44 MAC & PCI cores, which
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3b16f62..e953c6a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -5164,6 +5164,15 @@
 		res = dev_alloc_name(bond_dev, "bond%d");
 		if (res < 0)
 			goto out;
+	} else {
+		/*
+		 * If we're given a name to register
+		 * we need to ensure that its not already
+		 * registered
+		 */
+		res = -EEXIST;
+		if (__dev_get_by_name(net, name) != NULL)
+			goto out;
 	}
 
 	res = register_netdevice(bond_dev);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index a333b42..6372610 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -533,8 +533,15 @@
 	int length = cqe->num_bytes_transfered - 4;	/*remove CRC */
 
 	skb_put(skb, length);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	skb->protocol = eth_type_trans(skb, dev);
+
+	/* The packet was not an IPV4 packet so a complemented checksum was
+	   calculated. The value is found in the Internet Checksum field. */
+	if (cqe->status & EHEA_CQE_BLIND_CKSUM) {
+		skb->ip_summed = CHECKSUM_COMPLETE;
+		skb->csum = csum_unfold(~cqe->inet_checksum_value);
+	} else
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 }
 
 static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array,
diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h
index f608a6c..3810473 100644
--- a/drivers/net/ehea/ehea_qmr.h
+++ b/drivers/net/ehea/ehea_qmr.h
@@ -150,6 +150,7 @@
 #define EHEA_CQE_TYPE_RQ           0x60
 #define EHEA_CQE_STAT_ERR_MASK     0x700F
 #define EHEA_CQE_STAT_FAT_ERR_MASK 0xF
+#define EHEA_CQE_BLIND_CKSUM       0x8000
 #define EHEA_CQE_STAT_ERR_TCP      0x4000
 #define EHEA_CQE_STAT_ERR_IP       0x2000
 #define EHEA_CQE_STAT_ERR_CRC      0x1000
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 768b840..cce32d4 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -678,24 +678,37 @@
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct phy_device *phy_dev = NULL;
-	int ret;
+	char mdio_bus_id[MII_BUS_ID_SIZE];
+	char phy_name[MII_BUS_ID_SIZE + 3];
+	int phy_id;
 
 	fep->phy_dev = NULL;
 
-	/* find the first phy */
-	phy_dev = phy_find_first(fep->mii_bus);
-	if (!phy_dev) {
-		printk(KERN_ERR "%s: no PHY found\n", dev->name);
-		return -ENODEV;
+	/* check for attached phy */
+	for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+		if ((fep->mii_bus->phy_mask & (1 << phy_id)))
+			continue;
+		if (fep->mii_bus->phy_map[phy_id] == NULL)
+			continue;
+		if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
+			continue;
+		strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
+		break;
 	}
 
-	/* attach the mac to the phy */
-	ret = phy_connect_direct(dev, phy_dev,
-			     &fec_enet_adjust_link, 0,
-			     PHY_INTERFACE_MODE_MII);
-	if (ret) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return ret;
+	if (phy_id >= PHY_MAX_ADDR) {
+		printk(KERN_INFO "%s: no PHY, assuming direct connection "
+			"to switch\n", dev->name);
+		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE);
+		phy_id = 0;
+	}
+
+	snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+	phy_dev = phy_connect(dev, phy_name, &fec_enet_adjust_link, 0,
+		PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phy_dev)) {
+		printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
+		return PTR_ERR(phy_dev);
 	}
 
 	/* mask with MAC supported features */
@@ -738,7 +751,7 @@
 	fep->mii_bus->read = fec_enet_mdio_read;
 	fep->mii_bus->write = fec_enet_mdio_write;
 	fep->mii_bus->reset = fec_enet_mdio_reset;
-	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
+	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1);
 	fep->mii_bus->priv = fep;
 	fep->mii_bus->parent = &pdev->dev;
 
@@ -1311,6 +1324,9 @@
 	if (ret)
 		goto failed_mii_init;
 
+	/* Carrier starts down, phylib will bring it up */
+	netif_carrier_off(ndev);
+
 	ret = register_netdev(ndev);
 	if (ret)
 		goto failed_register;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index a0da4a1..992db2f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1212,7 +1212,8 @@
 	if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
 		return;
 
-	counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+	counters = dma_alloc_coherent(&tp->pci_dev->dev, sizeof(*counters),
+				      &paddr, GFP_KERNEL);
 	if (!counters)
 		return;
 
@@ -1233,7 +1234,8 @@
 	RTL_W32(CounterAddrLow, 0);
 	RTL_W32(CounterAddrHigh, 0);
 
-	pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+	dma_free_coherent(&tp->pci_dev->dev, sizeof(*counters), counters,
+			  paddr);
 }
 
 static void rtl8169_get_ethtool_stats(struct net_device *dev,
@@ -3292,15 +3294,15 @@
 
 	/*
 	 * Rx and Tx desscriptors needs 256 bytes alignment.
-	 * pci_alloc_consistent provides more.
+	 * dma_alloc_coherent provides more.
 	 */
-	tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES,
-					       &tp->TxPhyAddr);
+	tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES,
+					     &tp->TxPhyAddr, GFP_KERNEL);
 	if (!tp->TxDescArray)
 		goto err_pm_runtime_put;
 
-	tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES,
-					       &tp->RxPhyAddr);
+	tp->RxDescArray = dma_alloc_coherent(&pdev->dev, R8169_RX_RING_BYTES,
+					     &tp->RxPhyAddr, GFP_KERNEL);
 	if (!tp->RxDescArray)
 		goto err_free_tx_0;
 
@@ -3334,12 +3336,12 @@
 err_release_ring_2:
 	rtl8169_rx_clear(tp);
 err_free_rx_1:
-	pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
-			    tp->RxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+			  tp->RxPhyAddr);
 	tp->RxDescArray = NULL;
 err_free_tx_0:
-	pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
-			    tp->TxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+			  tp->TxPhyAddr);
 	tp->TxDescArray = NULL;
 err_pm_runtime_put:
 	pm_runtime_put_noidle(&pdev->dev);
@@ -3975,7 +3977,7 @@
 {
 	struct pci_dev *pdev = tp->pci_dev;
 
-	pci_unmap_single(pdev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
+	dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
 			 PCI_DMA_FROMDEVICE);
 	dev_kfree_skb(*sk_buff);
 	*sk_buff = NULL;
@@ -4000,7 +4002,7 @@
 static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
 					    struct net_device *dev,
 					    struct RxDesc *desc, int rx_buf_sz,
-					    unsigned int align)
+					    unsigned int align, gfp_t gfp)
 {
 	struct sk_buff *skb;
 	dma_addr_t mapping;
@@ -4008,13 +4010,13 @@
 
 	pad = align ? align : NET_IP_ALIGN;
 
-	skb = netdev_alloc_skb(dev, rx_buf_sz + pad);
+	skb = __netdev_alloc_skb(dev, rx_buf_sz + pad, gfp);
 	if (!skb)
 		goto err_out;
 
 	skb_reserve(skb, align ? ((pad - 1) & (unsigned long)skb->data) : pad);
 
-	mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+	mapping = dma_map_single(&pdev->dev, skb->data, rx_buf_sz,
 				 PCI_DMA_FROMDEVICE);
 
 	rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
@@ -4039,7 +4041,7 @@
 }
 
 static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
-			   u32 start, u32 end)
+			   u32 start, u32 end, gfp_t gfp)
 {
 	u32 cur;
 
@@ -4054,7 +4056,7 @@
 
 		skb = rtl8169_alloc_rx_skb(tp->pci_dev, dev,
 					   tp->RxDescArray + i,
-					   tp->rx_buf_sz, tp->align);
+					   tp->rx_buf_sz, tp->align, gfp);
 		if (!skb)
 			break;
 
@@ -4082,7 +4084,7 @@
 	memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
 	memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
 
-	if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+	if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC, GFP_KERNEL) != NUM_RX_DESC)
 		goto err_out;
 
 	rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
@@ -4099,7 +4101,8 @@
 {
 	unsigned int len = tx_skb->len;
 
-	pci_unmap_single(pdev, le64_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+	dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), len,
+			 PCI_DMA_TODEVICE);
 	desc->opts1 = 0x00;
 	desc->opts2 = 0x00;
 	desc->addr = 0x00;
@@ -4243,7 +4246,8 @@
 		txd = tp->TxDescArray + entry;
 		len = frag->size;
 		addr = ((void *) page_address(frag->page)) + frag->page_offset;
-		mapping = pci_map_single(tp->pci_dev, addr, len, PCI_DMA_TODEVICE);
+		mapping = dma_map_single(&tp->pci_dev->dev, addr, len,
+					 PCI_DMA_TODEVICE);
 
 		/* anti gcc 2.95.3 bugware (sic) */
 		status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
@@ -4313,7 +4317,8 @@
 		tp->tx_skb[entry].skb = skb;
 	}
 
-	mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+	mapping = dma_map_single(&tp->pci_dev->dev, skb->data, len,
+				 PCI_DMA_TODEVICE);
 
 	tp->tx_skb[entry].len = len;
 	txd->addr = cpu_to_le64(mapping);
@@ -4477,8 +4482,8 @@
 	if (!skb)
 		goto out;
 
-	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
-				    PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_cpu(&tp->pci_dev->dev, addr, pkt_size,
+				PCI_DMA_FROMDEVICE);
 	skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
 	*sk_buff = skb;
 	done = true;
@@ -4549,11 +4554,11 @@
 			rtl8169_rx_csum(skb, desc);
 
 			if (rtl8169_try_rx_copy(&skb, tp, pkt_size, addr)) {
-				pci_dma_sync_single_for_device(pdev, addr,
+				dma_sync_single_for_device(&pdev->dev, addr,
 					pkt_size, PCI_DMA_FROMDEVICE);
 				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 			} else {
-				pci_unmap_single(pdev, addr, tp->rx_buf_sz,
+				dma_unmap_single(&pdev->dev, addr, tp->rx_buf_sz,
 						 PCI_DMA_FROMDEVICE);
 				tp->Rx_skbuff[entry] = NULL;
 			}
@@ -4583,7 +4588,7 @@
 	count = cur_rx - tp->cur_rx;
 	tp->cur_rx = cur_rx;
 
-	delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+	delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx, GFP_ATOMIC);
 	if (!delta && count)
 		netif_info(tp, intr, dev, "no Rx buffer allocated\n");
 	tp->dirty_rx += delta;
@@ -4769,10 +4774,10 @@
 
 	free_irq(dev->irq, dev);
 
-	pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
-			    tp->RxPhyAddr);
-	pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
-			    tp->TxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+			  tp->RxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+			  tp->TxPhyAddr);
 	tp->TxDescArray = NULL;
 	tp->RxDescArray = NULL;
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 40e5c46..465ae7e 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -43,6 +43,7 @@
 #include <linux/seq_file.h>
 #include <linux/mii.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 #include <asm/irq.h>
 
 #include "skge.h"
@@ -3868,6 +3869,8 @@
 	netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr);
 }
 
+static int only_32bit_dma;
+
 static int __devinit skge_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
@@ -3889,7 +3892,7 @@
 
 	pci_set_master(pdev);
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!only_32bit_dma && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 	} else if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
@@ -4147,8 +4150,21 @@
 	.shutdown =	skge_shutdown,
 };
 
+static struct dmi_system_id skge_32bit_dma_boards[] = {
+	{
+		.ident = "Gigabyte nForce boards",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co"),
+			DMI_MATCH(DMI_BOARD_NAME, "nForce"),
+		},
+	},
+	{}
+};
+
 static int __init skge_init_module(void)
 {
+	if (dmi_check_system(skge_32bit_dma_boards))
+		only_32bit_dma = 1;
 	skge_debug_init();
 	return pci_register_driver(&skge_driver);
 }
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index bc3af78..1ec4b9e 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4666,7 +4666,7 @@
 				       desc_idx, *post_ptr);
 		drop_it_no_recycle:
 			/* Other statistics kept track of by card. */
-			tp->net_stats.rx_dropped++;
+			tp->rx_dropped++;
 			goto next_pkt;
 		}
 
@@ -4726,7 +4726,7 @@
 		if (len > (tp->dev->mtu + ETH_HLEN) &&
 		    skb->protocol != htons(ETH_P_8021Q)) {
 			dev_kfree_skb(skb);
-			goto next_pkt;
+			goto drop_it_no_recycle;
 		}
 
 		if (desc->type_flags & RXD_FLAG_VLAN &&
@@ -9240,6 +9240,8 @@
 	stats->rx_missed_errors = old_stats->rx_missed_errors +
 		get_stat64(&hw_stats->rx_discards);
 
+	stats->rx_dropped = tp->rx_dropped;
+
 	return stats;
 }
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 4937bd1..be7ff13 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2759,7 +2759,7 @@
 
 
 	/* begin "everything else" cacheline(s) section */
-	struct rtnl_link_stats64	net_stats;
+	unsigned long			rx_dropped;
 	struct rtnl_link_stats64	net_stats_prev;
 	struct tg3_ethtool_stats	estats;
 	struct tg3_ethtool_stats	estats_prev;
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 8cc9e31..1737d14 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -1244,16 +1244,16 @@
 	int i, result;
 	struct device *dev = i2400m_dev(i2400m);
 	const struct i2400m_msg_hdr *msg_hdr;
-	size_t pl_itr, pl_size, skb_len;
+	size_t pl_itr, pl_size;
 	unsigned long flags;
-	unsigned num_pls, single_last;
+	unsigned num_pls, single_last, skb_len;
 
 	skb_len = skb->len;
-	d_fnstart(4, dev, "(i2400m %p skb %p [size %zu])\n",
+	d_fnstart(4, dev, "(i2400m %p skb %p [size %u])\n",
 		  i2400m, skb, skb_len);
 	result = -EIO;
 	msg_hdr = (void *) skb->data;
-	result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb->len);
+	result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb_len);
 	if (result < 0)
 		goto error_msg_hdr_check;
 	result = -EIO;
@@ -1261,10 +1261,10 @@
 	pl_itr = sizeof(*msg_hdr) +	/* Check payload descriptor(s) */
 		num_pls * sizeof(msg_hdr->pld[0]);
 	pl_itr = ALIGN(pl_itr, I2400M_PL_ALIGN);
-	if (pl_itr > skb->len) {	/* got all the payload descriptors? */
+	if (pl_itr > skb_len) {	/* got all the payload descriptors? */
 		dev_err(dev, "RX: HW BUG? message too short (%u bytes) for "
 			"%u payload descriptors (%zu each, total %zu)\n",
-			skb->len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
+			skb_len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
 		goto error_pl_descr_short;
 	}
 	/* Walk each payload payload--check we really got it */
@@ -1272,7 +1272,7 @@
 		/* work around old gcc warnings */
 		pl_size = i2400m_pld_size(&msg_hdr->pld[i]);
 		result = i2400m_rx_pl_descr_check(i2400m, &msg_hdr->pld[i],
-						  pl_itr, skb->len);
+						  pl_itr, skb_len);
 		if (result < 0)
 			goto error_pl_descr_check;
 		single_last = num_pls == 1 || i == num_pls - 1;
@@ -1290,16 +1290,16 @@
 	if (i < i2400m->rx_pl_min)
 		i2400m->rx_pl_min = i;
 	i2400m->rx_num++;
-	i2400m->rx_size_acc += skb->len;
-	if (skb->len < i2400m->rx_size_min)
-		i2400m->rx_size_min = skb->len;
-	if (skb->len > i2400m->rx_size_max)
-		i2400m->rx_size_max = skb->len;
+	i2400m->rx_size_acc += skb_len;
+	if (skb_len < i2400m->rx_size_min)
+		i2400m->rx_size_min = skb_len;
+	if (skb_len > i2400m->rx_size_max)
+		i2400m->rx_size_max = skb_len;
 	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
 error_pl_descr_check:
 error_pl_descr_short:
 error_msg_hdr_check:
-	d_fnend(4, dev, "(i2400m %p skb %p [size %zu]) = %d\n",
+	d_fnend(4, dev, "(i2400m %p skb %p [size %u]) = %d\n",
 		i2400m, skb, skb_len, result);
 	return result;
 }
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index cc648b6..a3d95cc 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -543,7 +543,7 @@
 	if (conf_is_ht40(conf))
 		return clockrate * 2;
 
-	return clockrate * 2;
+	return clockrate;
 }
 
 static int32_t ath9k_hw_ani_get_listen_time(struct ath_hw *ah)
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index 9024480a..c44a5e8 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -51,7 +51,6 @@
  * TODO:
  *   - handle CPU hotplug
  *   - provide turbo enable/disable api
- *   - make sure we can write turbo enable/disable reg based on MISC_EN
  *
  * Related documents:
  *   - CDI 403777, 403778 - Auburndale EDS vol 1 & 2
@@ -230,7 +229,7 @@
 #define THM_TC2		0xac
 #define THM_DTV		0xb0
 #define THM_ITV		0xd8
-#define   ITV_ME_SEQNO_MASK 0x000f0000 /* ME should update every ~200ms */
+#define   ITV_ME_SEQNO_MASK 0x00ff0000 /* ME should update every ~200ms */
 #define   ITV_ME_SEQNO_SHIFT (16)
 #define   ITV_MCH_TEMP_MASK 0x0000ff00
 #define   ITV_MCH_TEMP_SHIFT (8)
@@ -325,6 +324,7 @@
 	bool gpu_preferred;
 	bool poll_turbo_status;
 	bool second_cpu;
+	bool turbo_toggle_allowed;
 	struct ips_mcp_limits *limits;
 
 	/* Optional MCH interfaces for if i915 is in use */
@@ -415,7 +415,7 @@
 	new_limit = cur_limit - 8; /* 1W decrease */
 
 	/* Clamp to SKU TDP limit */
-	if (((new_limit * 10) / 8) < (ips->orig_turbo_limit & TURBO_TDP_MASK))
+	if (new_limit  < (ips->orig_turbo_limit & TURBO_TDP_MASK))
 		new_limit = ips->orig_turbo_limit & TURBO_TDP_MASK;
 
 	thm_writew(THM_MPCPC, (new_limit * 10) / 8);
@@ -461,7 +461,8 @@
 	if (ips->__cpu_turbo_on)
 		return;
 
-	on_each_cpu(do_enable_cpu_turbo, ips, 1);
+	if (ips->turbo_toggle_allowed)
+		on_each_cpu(do_enable_cpu_turbo, ips, 1);
 
 	ips->__cpu_turbo_on = true;
 }
@@ -498,7 +499,8 @@
 	if (!ips->__cpu_turbo_on)
 		return;
 
-	on_each_cpu(do_disable_cpu_turbo, ips, 1);
+	if (ips->turbo_toggle_allowed)
+		on_each_cpu(do_disable_cpu_turbo, ips, 1);
 
 	ips->__cpu_turbo_on = false;
 }
@@ -598,17 +600,29 @@
 {
 	unsigned long flags;
 	bool ret = false;
+	u32 temp_limit;
+	u32 avg_power;
+	const char *msg = "MCP limit exceeded: ";
 
 	spin_lock_irqsave(&ips->turbo_status_lock, flags);
-	if (ips->mcp_avg_temp > (ips->mcp_temp_limit * 100))
-		ret = true;
-	if (ips->cpu_avg_power + ips->mch_avg_power > ips->mcp_power_limit)
-		ret = true;
-	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
 
-	if (ret)
+	temp_limit = ips->mcp_temp_limit * 100;
+	if (ips->mcp_avg_temp > temp_limit) {
 		dev_info(&ips->dev->dev,
-			 "MCP power or thermal limit exceeded\n");
+			"%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp,
+			temp_limit);
+		ret = true;
+	}
+
+	avg_power = ips->cpu_avg_power + ips->mch_avg_power;
+	if (avg_power > ips->mcp_power_limit) {
+		dev_info(&ips->dev->dev,
+			"%sAvg power %u, limit %u\n", msg, avg_power,
+			ips->mcp_power_limit);
+		ret = true;
+	}
+
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
 
 	return ret;
 }
@@ -663,6 +677,27 @@
 }
 
 /**
+ * verify_limits - verify BIOS provided limits
+ * @ips: IPS structure
+ *
+ * BIOS can optionally provide non-default limits for power and temp.  Check
+ * them here and use the defaults if the BIOS values are not provided or
+ * are otherwise unusable.
+ */
+static void verify_limits(struct ips_driver *ips)
+{
+	if (ips->mcp_power_limit < ips->limits->mcp_power_limit ||
+	    ips->mcp_power_limit > 35000)
+		ips->mcp_power_limit = ips->limits->mcp_power_limit;
+
+	if (ips->mcp_temp_limit < ips->limits->core_temp_limit ||
+	    ips->mcp_temp_limit < ips->limits->mch_temp_limit ||
+	    ips->mcp_temp_limit > 150)
+		ips->mcp_temp_limit = min(ips->limits->core_temp_limit,
+					  ips->limits->mch_temp_limit);
+}
+
+/**
  * update_turbo_limits - get various limits & settings from regs
  * @ips: IPS driver struct
  *
@@ -680,12 +715,21 @@
 	u32 hts = thm_readl(THM_HTS);
 
 	ips->cpu_turbo_enabled = !(hts & HTS_PCTD_DIS);
-	ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+	/* 
+	 * Disable turbo for now, until we can figure out why the power figures
+	 * are wrong
+	 */
+	ips->cpu_turbo_enabled = false;
+
+	if (ips->gpu_busy)
+		ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+
 	ips->core_power_limit = thm_readw(THM_MPCPC);
 	ips->mch_power_limit = thm_readw(THM_MMGPC);
 	ips->mcp_temp_limit = thm_readw(THM_PTL);
 	ips->mcp_power_limit = thm_readw(THM_MPPC);
 
+	verify_limits(ips);
 	/* Ignore BIOS CPU vs GPU pref */
 }
 
@@ -858,7 +902,7 @@
 	ret = (ret * 1000) / 65535;
 	*last = val;
 
-	return ret;
+	return 0;
 }
 
 static const u16 temp_decay_factor = 2;
@@ -940,7 +984,6 @@
 		kfree(mch_samples);
 		kfree(cpu_samples);
 		kfree(mchp_samples);
-		kthread_stop(ips->adjust);
 		return -ENOMEM;
 	}
 
@@ -948,7 +991,7 @@
 		ITV_ME_SEQNO_SHIFT;
 	seqno_timestamp = get_jiffies_64();
 
-	old_cpu_power = thm_readl(THM_CEC) / 65535;
+	old_cpu_power = thm_readl(THM_CEC);
 	schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
 
 	/* Collect an initial average */
@@ -1150,11 +1193,18 @@
 				STS_GPL_SHIFT;
 			/* ignore EC CPU vs GPU pref */
 			ips->cpu_turbo_enabled = !(sts & STS_PCTD_DIS);
-			ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
+			/* 
+			 * Disable turbo for now, until we can figure
+			 * out why the power figures are wrong
+			 */
+			ips->cpu_turbo_enabled = false;
+			if (ips->gpu_busy)
+				ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
 			ips->mcp_temp_limit = (sts & STS_PTL_MASK) >>
 				STS_PTL_SHIFT;
 			ips->mcp_power_limit = (tc1 & STS_PPL_MASK) >>
 				STS_PPL_SHIFT;
+			verify_limits(ips);
 			spin_unlock(&ips->turbo_status_lock);
 
 			thm_writeb(THM_SEC, SEC_ACK);
@@ -1333,8 +1383,10 @@
 	 * turbo manually or we'll get an illegal MSR access, even though
 	 * turbo will still be available.
 	 */
-	if (!(misc_en & IA32_MISC_TURBO_EN))
-		; /* add turbo MSR write allowed flag if necessary */
+	if (misc_en & IA32_MISC_TURBO_EN)
+		ips->turbo_toggle_allowed = true;
+	else
+		ips->turbo_toggle_allowed = false;
 
 	if (strstr(boot_cpu_data.x86_model_id, "CPU       M"))
 		limits = &ips_sv_limits;
@@ -1351,9 +1403,10 @@
 	tdp = turbo_power & TURBO_TDP_MASK;
 
 	/* Sanity check TDP against CPU */
-	if (limits->mcp_power_limit != (tdp / 8) * 1000) {
-		dev_warn(&ips->dev->dev, "Warning: CPU TDP doesn't match expected value (found %d, expected %d)\n",
-			 tdp / 8, limits->mcp_power_limit / 1000);
+	if (limits->core_power_limit != (tdp / 8) * 1000) {
+		dev_info(&ips->dev->dev, "CPU TDP doesn't match expected value (found %d, expected %d)\n",
+			 tdp / 8, limits->core_power_limit / 1000);
+		limits->core_power_limit = (tdp / 8) * 1000;
 	}
 
 out:
@@ -1390,7 +1443,7 @@
 	return true;
 
 out_put_busy:
-	symbol_put(i915_gpu_turbo_disable);
+	symbol_put(i915_gpu_busy);
 out_put_lower:
 	symbol_put(i915_gpu_lower);
 out_put_raise:
@@ -1532,23 +1585,28 @@
 	/* Save turbo limits & ratios */
 	rdmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
 
-	ips_enable_cpu_turbo(ips);
-	ips->cpu_turbo_enabled = true;
+	ips_disable_cpu_turbo(ips);
+	ips->cpu_turbo_enabled = false;
 
-	/* Set up the work queue and monitor/adjust threads */
-	ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
-	if (IS_ERR(ips->monitor)) {
-		dev_err(&dev->dev,
-			"failed to create thermal monitor thread, aborting\n");
-		ret = -ENOMEM;
-		goto error_free_irq;
-	}
-
+	/* Create thermal adjust thread */
 	ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
 	if (IS_ERR(ips->adjust)) {
 		dev_err(&dev->dev,
 			"failed to create thermal adjust thread, aborting\n");
 		ret = -ENOMEM;
+		goto error_free_irq;
+
+	}
+
+	/*
+	 * Set up the work queue and monitor thread. The monitor thread
+	 * will wake up ips_adjust thread.
+	 */
+	ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
+	if (IS_ERR(ips->monitor)) {
+		dev_err(&dev->dev,
+			"failed to create thermal monitor thread, aborting\n");
+		ret = -ENOMEM;
 		goto error_thread_cleanup;
 	}
 
@@ -1566,7 +1624,7 @@
 	return ret;
 
 error_thread_cleanup:
-	kthread_stop(ips->monitor);
+	kthread_stop(ips->adjust);
 error_free_irq:
 	free_irq(ips->dev->irq, ips);
 error_unmap:
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index df1fb53..a4be416 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -256,7 +256,6 @@
 
 	regulator_unregister(chip->rdev);
 	kfree(chip);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c
index d61ecb8..b8cc638 100644
--- a/drivers/regulator/isl6271a-regulator.c
+++ b/drivers/regulator/isl6271a-regulator.c
@@ -191,8 +191,6 @@
 	struct isl_pmic *pmic = i2c_get_clientdata(i2c);
 	int i;
 
-	i2c_set_clientdata(i2c, NULL);
-
 	for (i = 0; i < 3; i++)
 		regulator_unregister(pmic->rdev[i]);
 
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index 9daed8d..9de8516 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -268,7 +268,6 @@
 		free_irq(client->irq, client);
 
 out_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(ds3232);
 	return ret;
 }
@@ -287,7 +286,6 @@
 	}
 
 	rtc_device_unregister(ds3232->rtc);
-	i2c_set_clientdata(client, NULL);
 	kfree(ds3232);
 	return 0;
 }
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig
index c725356..de7ebb9 100644
--- a/drivers/staging/tm6000/Kconfig
+++ b/drivers/staging/tm6000/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_TM6000
 	tristate "TV Master TM5600/6000/6010 driver"
-	depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
+	depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
 	select VIDEO_TUNER
 	select MEDIA_TUNER_XC2028
 	select MEDIA_TUNER_XC5000
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index 32f7a0a..54f7667 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -46,7 +46,7 @@
 	}
 
 struct tm6000_ir_poll_result {
-	u8 rc_data[4];
+	u16 rc_data;
 };
 
 struct tm6000_IR {
@@ -60,9 +60,9 @@
 	int			polling;
 	struct delayed_work	work;
 	u8			wait:1;
+	u8			key:1;
 	struct urb		*int_urb;
 	u8			*urb_data;
-	u8			key:1;
 
 	int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
 
@@ -122,13 +122,14 @@
 
 	if (urb->status != 0)
 		printk(KERN_INFO "not ready\n");
-	else if (urb->actual_length > 0)
+	else if (urb->actual_length > 0) {
 		memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
 
-	dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
-	ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+		dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
+			ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
 
-	ir->key = 1;
+		ir->key = 1;
+	}
 
 	rc = usb_submit_urb(urb, GFP_ATOMIC);
 }
@@ -140,30 +141,47 @@
 	int rc;
 	u8 buf[2];
 
-	if (ir->wait && !&dev->int_in) {
-		poll_result->rc_data[0] = 0xff;
+	if (ir->wait && !&dev->int_in)
 		return 0;
-	}
 
 	if (&dev->int_in) {
-		poll_result->rc_data[0] = ir->urb_data[0];
-		poll_result->rc_data[1] = ir->urb_data[1];
+		if (ir->ir.ir_type == IR_TYPE_RC5)
+			poll_result->rc_data = ir->urb_data[0];
+		else
+			poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
 	} else {
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
 		msleep(10);
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
 		msleep(10);
 
-		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
-		 USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1);
+		if (ir->ir.ir_type == IR_TYPE_RC5) {
+			rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+				USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				REQ_02_GET_IR_CODE, 0, 0, buf, 1);
 
-		msleep(10);
+			msleep(10);
 
-		dprintk("read data=%02x\n", buf[0]);
-		if (rc < 0)
-			return rc;
+			dprintk("read data=%02x\n", buf[0]);
+			if (rc < 0)
+				return rc;
 
-		poll_result->rc_data[0] = buf[0];
+			poll_result->rc_data = buf[0];
+		} else {
+			rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+				USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+
+			msleep(10);
+
+			dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
+			if (rc < 0)
+				return rc;
+
+			poll_result->rc_data = buf[0] | buf[1] << 8;
+		}
+		if ((poll_result->rc_data & 0x00ff) != 0xff)
+			ir->key = 1;
 	}
 	return 0;
 }
@@ -180,12 +198,11 @@
 		return;
 	}
 
-	dprintk("ir->get_key result data=%02x %02x\n",
-		poll_result.rc_data[0], poll_result.rc_data[1]);
+	dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
 
-	if (poll_result.rc_data[0] != 0xff && ir->key == 1) {
+	if (ir->key) {
 		ir_input_keydown(ir->input->input_dev, &ir->ir,
-			poll_result.rc_data[0] | poll_result.rc_data[1] << 8);
+				(u32)poll_result.rc_data);
 
 		ir_input_nokey(ir->input->input_dev, &ir->ir);
 		ir->key = 0;
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index f96eff0..a6395bd 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -134,10 +134,6 @@
 		if (!dump_write(file, dump_start, dump_size))
 			goto end_coredump;
 	}
-/* Finally dump the task struct.  Not be used by gdb, but could be useful */
-	set_fs(KERNEL_DS);
-	if (!dump_write(file, current, sizeof(*current)))
-		goto end_coredump;
 end_coredump:
 	set_fs(fs);
 	return has_dumped;
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 73c1530..5e9da99 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2283,7 +2283,8 @@
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	int mds = session->s_mds;
-	int seq = le32_to_cpu(grant->seq);
+	unsigned seq = le32_to_cpu(grant->seq);
+	unsigned issue_seq = le32_to_cpu(grant->issue_seq);
 	int newcaps = le32_to_cpu(grant->caps);
 	int issued, implemented, used, wanted, dirty;
 	u64 size = le64_to_cpu(grant->size);
@@ -2295,8 +2296,8 @@
 	int revoked_rdcache = 0;
 	int queue_invalidate = 0;
 
-	dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
-	     inode, cap, mds, seq, ceph_cap_string(newcaps));
+	dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n",
+	     inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps));
 	dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
 		inode->i_size);
 
@@ -2392,6 +2393,7 @@
 	}
 
 	cap->seq = seq;
+	cap->issue_seq = issue_seq;
 
 	/* file layout may have changed */
 	ci->i_layout = grant->layout;
@@ -2774,15 +2776,7 @@
 		if (op == CEPH_CAP_OP_IMPORT)
 			__queue_cap_release(session, vino.ino, cap_id,
 					    mseq, seq);
-
-		/*
-		 * send any full release message to try to move things
-		 * along for the mds (who clearly thinks we still have this
-		 * cap).
-		 */
-		ceph_add_cap_releases(mdsc, session);
-		ceph_send_cap_releases(mdsc, session);
-		goto done;
+		goto flush_cap_releases;
 	}
 
 	/* these will work even if we don't have a cap yet */
@@ -2810,7 +2804,7 @@
 		dout(" no cap on %p ino %llx.%llx from mds%d\n",
 		     inode, ceph_ino(inode), ceph_snap(inode), mds);
 		spin_unlock(&inode->i_lock);
-		goto done;
+		goto flush_cap_releases;
 	}
 
 	/* note that each of these drops i_lock for us */
@@ -2834,6 +2828,17 @@
 		       ceph_cap_op_name(op));
 	}
 
+	goto done;
+
+flush_cap_releases:
+	/*
+	 * send any full release message to try to move things
+	 * along for the mds (who clearly thinks we still have this
+	 * cap).
+	 */
+	ceph_add_cap_releases(mdsc, session);
+	ceph_send_cap_releases(mdsc, session);
+
 done:
 	mutex_unlock(&session->s_mutex);
 done_unlocked:
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index 4480cb1..e38423e 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -42,32 +42,37 @@
 static int ceph_encode_fh(struct dentry *dentry, u32 *rawfh, int *max_len,
 			  int connectable)
 {
+	int type;
 	struct ceph_nfs_fh *fh = (void *)rawfh;
 	struct ceph_nfs_confh *cfh = (void *)rawfh;
 	struct dentry *parent = dentry->d_parent;
 	struct inode *inode = dentry->d_inode;
-	int type;
+	int connected_handle_length = sizeof(*cfh)/4;
+	int handle_length = sizeof(*fh)/4;
 
 	/* don't re-export snaps */
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EINVAL;
 
-	if (*max_len >= sizeof(*cfh)) {
+	if (*max_len >= connected_handle_length) {
 		dout("encode_fh %p connectable\n", dentry);
 		cfh->ino = ceph_ino(dentry->d_inode);
 		cfh->parent_ino = ceph_ino(parent->d_inode);
 		cfh->parent_name_hash = parent->d_name.hash;
-		*max_len = sizeof(*cfh);
+		*max_len = connected_handle_length;
 		type = 2;
-	} else if (*max_len > sizeof(*fh)) {
-		if (connectable)
-			return -ENOSPC;
+	} else if (*max_len >= handle_length) {
+		if (connectable) {
+			*max_len = connected_handle_length;
+			return 255;
+		}
 		dout("encode_fh %p\n", dentry);
 		fh->ino = ceph_ino(dentry->d_inode);
-		*max_len = sizeof(*fh);
+		*max_len = handle_length;
 		type = 1;
 	} else {
-		return -ENOSPC;
+		*max_len = handle_length;
+		return 255;
 	}
 	return type;
 }
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 8c044a4..66e4da6 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -697,7 +697,7 @@
 			 * start_request so that a tid has been assigned.
 			 */
 			spin_lock(&ci->i_unsafe_lock);
-			list_add(&ci->i_unsafe_writes, &req->r_unsafe_item);
+			list_add(&req->r_unsafe_item, &ci->i_unsafe_writes);
 			spin_unlock(&ci->i_unsafe_lock);
 			ceph_get_cap_refs(ci, CEPH_CAP_FILE_WR);
 		}
diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c
index dfced1d..3b5571b 100644
--- a/fs/ceph/osd_client.c
+++ b/fs/ceph/osd_client.c
@@ -549,7 +549,7 @@
  */
 static void __cancel_request(struct ceph_osd_request *req)
 {
-	if (req->r_sent) {
+	if (req->r_sent && req->r_osd) {
 		ceph_con_revoke(&req->r_osd->o_con, req->r_request);
 		req->r_sent = 0;
 	}
diff --git a/fs/exec.c b/fs/exec.c
index 828dd24..03278c9 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -2014,3 +2014,41 @@
 fail:
 	return;
 }
+
+/*
+ * Core dumping helper functions.  These are the only things you should
+ * do on a core-file: use only these functions to write out all the
+ * necessary info.
+ */
+int dump_write(struct file *file, const void *addr, int nr)
+{
+	return access_ok(VERIFY_READ, addr, nr) && file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+}
+
+int dump_seek(struct file *file, loff_t off)
+{
+	int ret = 1;
+
+	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
+		if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
+			return 0;
+	} else {
+		char *buf = (char *)get_zeroed_page(GFP_KERNEL);
+
+		if (!buf)
+			return 0;
+		while (off > 0) {
+			unsigned long n = off;
+
+			if (n > PAGE_SIZE)
+				n = PAGE_SIZE;
+			if (!dump_write(file, buf, n)) {
+				ret = 0;
+				break;
+			}
+			off -= n;
+		}
+		free_page((unsigned long)buf);
+	}
+	return ret;
+}
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index eb7368e..3eadd97 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -54,6 +54,9 @@
 	unsigned nr_pages;
 	unsigned long length;
 	loff_t pg_first; /* keep 64bit also in 32-arches */
+	bool read_4_write; /* This means two things: that the read is sync
+			    * And the pages should not be unlocked.
+			    */
 };
 
 static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
@@ -71,6 +74,7 @@
 	pcol->nr_pages = 0;
 	pcol->length = 0;
 	pcol->pg_first = -1;
+	pcol->read_4_write = false;
 }
 
 static void _pcol_reset(struct page_collect *pcol)
@@ -347,7 +351,8 @@
 		if (PageError(page))
 			ClearPageError(page);
 
-		unlock_page(page);
+		if (!pcol->read_4_write)
+			unlock_page(page);
 		EXOFS_DBGMSG("readpage_strip(0x%lx, 0x%lx) empty page,"
 			     " splitting\n", inode->i_ino, page->index);
 
@@ -428,6 +433,7 @@
 	/* readpage_strip might call read_exec(,is_sync==false) at several
 	 * places but not if we have a single page.
 	 */
+	pcol.read_4_write = is_sync;
 	ret = readpage_strip(&pcol, page);
 	if (ret) {
 		EXOFS_ERR("_readpage => %d\n", ret);
diff --git a/fs/nfsd/nfsfh.h b/fs/nfsd/nfsfh.h
index cdfb8c6..c16f8d8 100644
--- a/fs/nfsd/nfsfh.h
+++ b/fs/nfsd/nfsfh.h
@@ -196,8 +196,6 @@
 static inline void
 fh_unlock(struct svc_fh *fhp)
 {
-	BUG_ON(!fhp->fh_dentry);
-
 	if (fhp->fh_locked) {
 		fill_post_wcc(fhp);
 		mutex_unlock(&fhp->fh_dentry->d_inode->i_mutex);
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 22c629e..b388443 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -3,4 +3,4 @@
 
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"
-source "fs/notify/fanotify/Kconfig"
+#source "fs/notify/fanotify/Kconfig"
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index d59c4a6..81976ff 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -668,14 +668,11 @@
 	xfs_perag_put(pag);
 }
 
-void
-__xfs_inode_clear_reclaim_tag(
-	xfs_mount_t	*mp,
+STATIC void
+__xfs_inode_clear_reclaim(
 	xfs_perag_t	*pag,
 	xfs_inode_t	*ip)
 {
-	radix_tree_tag_clear(&pag->pag_ici_root,
-			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
 	pag->pag_ici_reclaimable--;
 	if (!pag->pag_ici_reclaimable) {
 		/* clear the reclaim tag from the perag radix tree */
@@ -689,6 +686,17 @@
 	}
 }
 
+void
+__xfs_inode_clear_reclaim_tag(
+	xfs_mount_t	*mp,
+	xfs_perag_t	*pag,
+	xfs_inode_t	*ip)
+{
+	radix_tree_tag_clear(&pag->pag_ici_root,
+			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+	__xfs_inode_clear_reclaim(pag, ip);
+}
+
 /*
  * Inodes in different states need to be treated differently, and the return
  * value of xfs_iflush is not sufficient to get this right. The following table
@@ -838,6 +846,7 @@
 	if (!radix_tree_delete(&pag->pag_ici_root,
 				XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
 		ASSERT(0);
+	__xfs_inode_clear_reclaim(pag, ip);
 	write_unlock(&pag->pag_ici_lock);
 
 	/*
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 267a86c..2040e6c 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -246,9 +246,11 @@
 
 	atomic_t reserved;
 
-
 	/**
 	 * Members protected by the bo::lock
+	 * In addition, setting sync_obj to anything else
+	 * than NULL requires bo::reserved to be held. This allows for
+	 * checking NULL while reserved but not holding bo::lock.
 	 */
 
 	void *sync_obj_arg;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 626b629..4e8ea8c 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -118,7 +118,6 @@
 header-y += ext2_fs.h
 header-y += fadvise.h
 header-y += falloc.h
-header-y += fanotify.h
 header-y += fb.h
 header-y += fcntl.h
 header-y += fd.h
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
index 8ba66a9..ba4b85a 100644
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -9,37 +9,7 @@
  * These are the only things you should do on a core-file: use only these
  * functions to write out all the necessary info.
  */
-static inline int dump_write(struct file *file, const void *addr, int nr)
-{
-	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
-
-static inline int dump_seek(struct file *file, loff_t off)
-{
-	int ret = 1;
-
-	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
-		if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
-			return 0;
-	} else {
-		char *buf = (char *)get_zeroed_page(GFP_KERNEL);
-
-		if (!buf)
-			return 0;
-		while (off > 0) {
-			unsigned long n = off;
-
-			if (n > PAGE_SIZE)
-				n = PAGE_SIZE;
-			if (!dump_write(file, buf, n)) {
-				ret = 0;
-				break;
-			}
-			off -= n;
-		}
-		free_page((unsigned long)buf);
-	}
-	return ret;
-}
+extern int dump_write(struct file *file, const void *addr, int nr);
+extern int dump_seek(struct file *file, loff_t off);
 
 #endif /* _LINUX_COREDUMP_H */
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 926b503..4fd978e 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -93,6 +93,7 @@
 	struct elevator_type *elevator_type;
 	struct mutex sysfs_lock;
 	struct hlist_head *hash;
+	unsigned int registered:1;
 };
 
 /*
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index 97e07f4..aa4ebb4 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -48,6 +48,7 @@
 
 	/* for userland buffer */
 	int                 offset;
+	size_t		    size;
 	struct page         **pages;
 
 	/* for kernel buffers */
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 27a902d..30fce01 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -161,12 +161,30 @@
 {
 	struct sk_buff *skb;
 
+	release_sock(sk);
 	if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
 		skb_reserve(skb, BT_SKB_RESERVE);
 		bt_cb(skb)->incoming  = 0;
 	}
+	lock_sock(sk);
+
+	if (!skb && *err)
+		return NULL;
+
+	*err = sock_error(sk);
+	if (*err)
+		goto out;
+
+	if (sk->sk_shutdown) {
+		*err = -ECONNRESET;
+		goto out;
+	}
 
 	return skb;
+
+out:
+	kfree_skb(skb);
+	return NULL;
 }
 
 int bt_err(__u16 code);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index db5b560..b98bed3 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -2202,15 +2202,13 @@
 static int perf_event_period(struct perf_event *event, u64 __user *arg)
 {
 	struct perf_event_context *ctx = event->ctx;
-	unsigned long size;
 	int ret = 0;
 	u64 value;
 
 	if (!event->attr.sample_period)
 		return -EINVAL;
 
-	size = copy_from_user(&value, arg, sizeof(value));
-	if (size != sizeof(value))
+	if (copy_from_user(&value, arg, sizeof(value)))
 		return -EFAULT;
 
 	if (!value)
diff --git a/kernel/signal.c b/kernel/signal.c
index bded651..919562c 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2215,6 +2215,14 @@
 #ifdef __ARCH_SI_TRAPNO
 		err |= __put_user(from->si_trapno, &to->si_trapno);
 #endif
+#ifdef BUS_MCEERR_AO
+		/* 
+		 * Other callers might not initialize the si_lsb field,
+	 	 * so check explicitely for the right codes here.
+		 */
+		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
+#endif
 		break;
 	case __SI_CHLD:
 		err |= __put_user(from->si_pid, &to->si_pid);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index f88552c..3a45c22 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2485,7 +2485,7 @@
 		kbuf[left] = 0;
 	}
 
-	for (; left && vleft--; i++, min++, max++, first=0) {
+	for (; left && vleft--; i++, first = 0) {
 		unsigned long val;
 
 		if (write) {
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 492197e..bca9637 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -405,7 +405,7 @@
 #define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2))
 
 /* Max number of timestamps that can fit on a page */
-#define RB_TIMESTAMPS_PER_PAGE	(BUF_PAGE_SIZE / RB_LEN_TIME_STAMP)
+#define RB_TIMESTAMPS_PER_PAGE	(BUF_PAGE_SIZE / RB_LEN_TIME_EXTEND)
 
 int ring_buffer_print_page_header(struct trace_seq *s)
 {
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 3eed583..9be3cf8 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3587,9 +3587,13 @@
 
 static void mem_cgroup_threshold(struct mem_cgroup *memcg)
 {
-	__mem_cgroup_threshold(memcg, false);
-	if (do_swap_account)
-		__mem_cgroup_threshold(memcg, true);
+	while (memcg) {
+		__mem_cgroup_threshold(memcg, false);
+		if (do_swap_account)
+			__mem_cgroup_threshold(memcg, true);
+
+		memcg = parent_mem_cgroup(memcg);
+	}
 }
 
 static int compare_thresholds(const void *a, const void *b)
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 9c26eec..757f6b0 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -183,7 +183,7 @@
  * signal.
  */
 static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
-			unsigned long pfn)
+			unsigned long pfn, struct page *page)
 {
 	struct siginfo si;
 	int ret;
@@ -198,7 +198,7 @@
 #ifdef __ARCH_SI_TRAPNO
 	si.si_trapno = trapno;
 #endif
-	si.si_addr_lsb = PAGE_SHIFT;
+	si.si_addr_lsb = compound_order(compound_head(page)) + PAGE_SHIFT;
 	/*
 	 * Don't use force here, it's convenient if the signal
 	 * can be temporarily blocked.
@@ -235,7 +235,7 @@
 		int nr;
 		do {
 			nr = shrink_slab(1000, GFP_KERNEL, 1000);
-			if (page_count(p) == 0)
+			if (page_count(p) == 1)
 				break;
 		} while (nr > 10);
 	}
@@ -327,7 +327,7 @@
  * wrong earlier.
  */
 static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno,
-			  int fail, unsigned long pfn)
+			  int fail, struct page *page, unsigned long pfn)
 {
 	struct to_kill *tk, *next;
 
@@ -352,7 +352,7 @@
 			 * process anyways.
 			 */
 			else if (kill_proc_ao(tk->tsk, tk->addr, trapno,
-					      pfn) < 0)
+					      pfn, page) < 0)
 				printk(KERN_ERR
 		"MCE %#lx: Cannot send advisory machine check signal to %s:%d\n",
 					pfn, tk->tsk->comm, tk->tsk->pid);
@@ -928,7 +928,7 @@
 	 * any accesses to the poisoned memory.
 	 */
 	kill_procs_ao(&tokill, !!PageDirty(hpage), trapno,
-		      ret != SWAP_SUCCESS, pfn);
+		      ret != SWAP_SUCCESS, p, pfn);
 
 	return ret;
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a8cfa9c..f12ad18 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5182,9 +5182,9 @@
 	if (!table)
 		panic("Failed to allocate %s hash table\n", tablename);
 
-	printk(KERN_INFO "%s hash table entries: %d (order: %d, %lu bytes)\n",
+	printk(KERN_INFO "%s hash table entries: %ld (order: %d, %lu bytes)\n",
 	       tablename,
-	       (1U << log2qty),
+	       (1UL << log2qty),
 	       ilog2(size) - PAGE_SHIFT,
 	       size);
 
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index 622b471..74bcc66 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -778,7 +778,7 @@
 	eg->packets_rcvd++;
 	mpc->eg_ops->put(eg);
 
-	memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
+	memset(ATM_SKB(new_skb), 0, sizeof(struct atm_skb_data));
 	netif_rx(new_skb);
 }
 
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index fadf26b..0b54b7d 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -1441,33 +1441,23 @@
 
 static void l2cap_streaming_send(struct sock *sk)
 {
-	struct sk_buff *skb, *tx_skb;
+	struct sk_buff *skb;
 	struct l2cap_pinfo *pi = l2cap_pi(sk);
 	u16 control, fcs;
 
-	while ((skb = sk->sk_send_head)) {
-		tx_skb = skb_clone(skb, GFP_ATOMIC);
-
-		control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+	while ((skb = skb_dequeue(TX_QUEUE(sk)))) {
+		control = get_unaligned_le16(skb->data + L2CAP_HDR_SIZE);
 		control |= pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT;
-		put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
+		put_unaligned_le16(control, skb->data + L2CAP_HDR_SIZE);
 
 		if (pi->fcs == L2CAP_FCS_CRC16) {
-			fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2);
-			put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2);
+			fcs = crc16(0, (u8 *)skb->data, skb->len - 2);
+			put_unaligned_le16(fcs, skb->data + skb->len - 2);
 		}
 
-		l2cap_do_send(sk, tx_skb);
+		l2cap_do_send(sk, skb);
 
 		pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
-
-		if (skb_queue_is_last(TX_QUEUE(sk), skb))
-			sk->sk_send_head = NULL;
-		else
-			sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb);
-
-		skb = skb_dequeue(TX_QUEUE(sk));
-		kfree_skb(skb);
 	}
 }
 
@@ -1960,6 +1950,11 @@
 
 	switch (optname) {
 	case L2CAP_OPTIONS:
+		if (sk->sk_state == BT_CONNECTED) {
+			err = -EINVAL;
+			break;
+		}
+
 		opts.imtu     = l2cap_pi(sk)->imtu;
 		opts.omtu     = l2cap_pi(sk)->omtu;
 		opts.flush_to = l2cap_pi(sk)->flush_to;
@@ -2771,10 +2766,10 @@
 		case L2CAP_CONF_MTU:
 			if (val < L2CAP_DEFAULT_MIN_MTU) {
 				*result = L2CAP_CONF_UNACCEPT;
-				pi->omtu = L2CAP_DEFAULT_MIN_MTU;
+				pi->imtu = L2CAP_DEFAULT_MIN_MTU;
 			} else
-				pi->omtu = val;
-			l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
+				pi->imtu = val;
+			l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
 			break;
 
 		case L2CAP_CONF_FLUSH_TO:
@@ -3071,6 +3066,17 @@
 	return 0;
 }
 
+static inline void set_default_fcs(struct l2cap_pinfo *pi)
+{
+	/* FCS is enabled only in ERTM or streaming mode, if one or both
+	 * sides request it.
+	 */
+	if (pi->mode != L2CAP_MODE_ERTM && pi->mode != L2CAP_MODE_STREAMING)
+		pi->fcs = L2CAP_FCS_NONE;
+	else if (!(pi->conf_state & L2CAP_CONF_NO_FCS_RECV))
+		pi->fcs = L2CAP_FCS_CRC16;
+}
+
 static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
 {
 	struct l2cap_conf_req *req = (struct l2cap_conf_req *) data;
@@ -3088,14 +3094,8 @@
 	if (!sk)
 		return -ENOENT;
 
-	if (sk->sk_state != BT_CONFIG) {
-		struct l2cap_cmd_rej rej;
-
-		rej.reason = cpu_to_le16(0x0002);
-		l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ,
-				sizeof(rej), &rej);
+	if (sk->sk_state == BT_DISCONN)
 		goto unlock;
-	}
 
 	/* Reject if config buffer is too small. */
 	len = cmd_len - sizeof(*req);
@@ -3135,9 +3135,7 @@
 		goto unlock;
 
 	if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
-		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
-		    l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
-			l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+		set_default_fcs(l2cap_pi(sk));
 
 		sk->sk_state = BT_CONNECTED;
 
@@ -3225,9 +3223,7 @@
 	l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
 
 	if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
-		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
-		    l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
-			l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+		set_default_fcs(l2cap_pi(sk));
 
 		sk->sk_state = BT_CONNECTED;
 		l2cap_pi(sk)->next_tx_seq = 0;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 44a6232..194b3a0 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -82,11 +82,14 @@
 static void rfcomm_sk_state_change(struct rfcomm_dlc *d, int err)
 {
 	struct sock *sk = d->owner, *parent;
+	unsigned long flags;
+
 	if (!sk)
 		return;
 
 	BT_DBG("dlc %p state %ld err %d", d, d->state, err);
 
+	local_irq_save(flags);
 	bh_lock_sock(sk);
 
 	if (err)
@@ -108,6 +111,7 @@
 	}
 
 	bh_unlock_sock(sk);
+	local_irq_restore(flags);
 
 	if (parent && sock_flag(sk, SOCK_ZAPPED)) {
 		/* We have to drop DLC lock here, otherwise
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index 8ce9047..4bf28f2 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -827,6 +827,7 @@
 	long timeo;
 	int err;
 	int ifindex, headroom, tailroom;
+	unsigned int mtu;
 	struct net_device *dev;
 
 	lock_sock(sk);
@@ -896,15 +897,23 @@
 		cf_sk->sk.sk_state = CAIF_DISCONNECTED;
 		goto out;
 	}
-	dev = dev_get_by_index(sock_net(sk), ifindex);
+
+	err = -ENODEV;
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
+	if (!dev) {
+		rcu_read_unlock();
+		goto out;
+	}
 	cf_sk->headroom = LL_RESERVED_SPACE_EXTRA(dev, headroom);
+	mtu = dev->mtu;
+	rcu_read_unlock();
+
 	cf_sk->tailroom = tailroom;
-	cf_sk->maxframe = dev->mtu - (headroom + tailroom);
-	dev_put(dev);
+	cf_sk->maxframe = mtu - (headroom + tailroom);
 	if (cf_sk->maxframe < 1) {
-		pr_warning("CAIF: %s(): CAIF Interface MTU too small (%d)\n",
-			__func__, dev->mtu);
-		err = -ENODEV;
+		pr_warning("CAIF: %s(): CAIF Interface MTU too small (%u)\n",
+			   __func__, mtu);
 		goto out;
 	}
 
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 7a85367..8451ab4 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -348,7 +348,7 @@
 	if (info.cmd == ETHTOOL_GRXCLSRLALL) {
 		if (info.rule_cnt > 0) {
 			if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
-				rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
+				rule_buf = kzalloc(info.rule_cnt * sizeof(u32),
 						   GFP_USER);
 			if (!rule_buf)
 				return -ENOMEM;
@@ -397,7 +397,7 @@
 	    (KMALLOC_MAX_SIZE - sizeof(*indir)) / sizeof(*indir->ring_index))
 		return -ENOMEM;
 	full_size = sizeof(*indir) + sizeof(*indir->ring_index) * table_size;
-	indir = kmalloc(full_size, GFP_USER);
+	indir = kzalloc(full_size, GFP_USER);
 	if (!indir)
 		return -ENOMEM;
 
@@ -538,7 +538,7 @@
 
 	gstrings.len = ret;
 
-	data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
+	data = kzalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
 	if (!data)
 		return -ENOMEM;
 
@@ -775,7 +775,7 @@
 	if (regs.len > reglen)
 		regs.len = reglen;
 
-	regbuf = kmalloc(reglen, GFP_USER);
+	regbuf = kzalloc(reglen, GFP_USER);
 	if (!regbuf)
 		return -ENOMEM;
 
diff --git a/net/core/stream.c b/net/core/stream.c
index d959e0f..f5df85d 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -141,10 +141,10 @@
 
 		set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
 		sk->sk_write_pending++;
-		sk_wait_event(sk, &current_timeo, !sk->sk_err &&
-						  !(sk->sk_shutdown & SEND_SHUTDOWN) &&
-						  sk_stream_memory_free(sk) &&
-						  vm_wait);
+		sk_wait_event(sk, &current_timeo, sk->sk_err ||
+						  (sk->sk_shutdown & SEND_SHUTDOWN) ||
+						  (sk_stream_memory_free(sk) &&
+						  !vm_wait));
 		sk->sk_write_pending--;
 
 		if (vm_wait) {
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 72380a3..7cd7760 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -413,7 +413,7 @@
 	  If unsure, say Y.
 
 config INET_LRO
-	bool "Large Receive Offload (ipv4/tcp)"
+	tristate "Large Receive Offload (ipv4/tcp)"
 	default y
 	---help---
 	  Support for Large Receive Offload (ipv4/tcp).
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 1fdcacd..2a4bb76 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -834,7 +834,7 @@
 	int			mark = 0;
 
 
-	if (len == 8 || IGMP_V2_SEEN(in_dev)) {
+	if (len == 8) {
 		if (ih->code == 0) {
 			/* Alas, old v1 router presents here. */
 
@@ -856,6 +856,18 @@
 		igmpv3_clear_delrec(in_dev);
 	} else if (len < 12) {
 		return;	/* ignore bogus packet; freed by caller */
+	} else if (IGMP_V1_SEEN(in_dev)) {
+		/* This is a v3 query with v1 queriers present */
+		max_delay = IGMP_Query_Response_Interval;
+		group = 0;
+	} else if (IGMP_V2_SEEN(in_dev)) {
+		/* this is a v3 query with v2 queriers present;
+		 * Interpretation of the max_delay code is problematic here.
+		 * A real v2 host would use ih_code directly, while v3 has a
+		 * different encoding. We use the v3 encoding as more likely
+		 * to be intended in a v3 query.
+		 */
+		max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE);
 	} else { /* v3 */
 		if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
 			return;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 8323136..a275c6e 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1556,14 +1556,13 @@
  *	i.e. Path MTU discovery
  */
 
-void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
-			struct net_device *dev, u32 pmtu)
+static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
+			     struct net *net, u32 pmtu, int ifindex)
 {
 	struct rt6_info *rt, *nrt;
-	struct net *net = dev_net(dev);
 	int allfrag = 0;
 
-	rt = rt6_lookup(net, daddr, saddr, dev->ifindex, 0);
+	rt = rt6_lookup(net, daddr, saddr, ifindex, 0);
 	if (rt == NULL)
 		return;
 
@@ -1631,6 +1630,27 @@
 	dst_release(&rt->dst);
 }
 
+void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
+			struct net_device *dev, u32 pmtu)
+{
+	struct net *net = dev_net(dev);
+
+	/*
+	 * RFC 1981 states that a node "MUST reduce the size of the packets it
+	 * is sending along the path" that caused the Packet Too Big message.
+	 * Since it's not possible in the general case to determine which
+	 * interface was used to send the original packet, we update the MTU
+	 * on the interface that will be used to send future packets. We also
+	 * update the MTU on the interface that received the Packet Too Big in
+	 * case the original packet was forced out that interface with
+	 * SO_BINDTODEVICE or similar. This is the next best thing to the
+	 * correct behaviour, which would be to update the MTU on all
+	 * interfaces.
+	 */
+	rt6_do_pmtu_disc(daddr, saddr, net, pmtu, 0);
+	rt6_do_pmtu_disc(daddr, saddr, net, pmtu, dev->ifindex);
+}
+
 /*
  *	Misc support functions
  */
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index c893f23..8f23401 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -175,6 +175,8 @@
 
 	set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
 
+	del_timer_sync(&tid_tx->addba_resp_timer);
+
 	/*
 	 * After this packets are no longer handed right through
 	 * to the driver but are put onto tid_tx->pending instead,
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 10caec5..34da679 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -377,7 +377,7 @@
 				skb2 = skb_clone(skb, GFP_ATOMIC);
 				if (skb2) {
 					skb2->dev = prev_dev;
-					netif_receive_skb(skb2);
+					netif_rx(skb2);
 				}
 			}
 
@@ -386,7 +386,7 @@
 	}
 	if (prev_dev) {
 		skb->dev = prev_dev;
-		netif_receive_skb(skb);
+		netif_rx(skb);
 		skb = NULL;
 	}
 	rcu_read_unlock();
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 7416a5c..b0c2a82 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -137,7 +137,7 @@
 			int toff = off + key->off + (off2 & key->offmask);
 			__be32 *data, _data;
 
-			if (skb_headroom(skb) + toff < 0)
+			if (skb_headroom(skb) + toff > INT_MAX)
 				goto out;
 
 			data = skb_header_pointer(skb, toff, 4, &_data);
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 8636639..ddbbf7c 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -543,16 +543,20 @@
 		id = ntohs(hmacs->hmac_ids[i]);
 
 		/* Check the id is in the supported range */
-		if (id > SCTP_AUTH_HMAC_ID_MAX)
+		if (id > SCTP_AUTH_HMAC_ID_MAX) {
+			id = 0;
 			continue;
+		}
 
 		/* See is we support the id.  Supported IDs have name and
 		 * length fields set, so that we can allocated and use
 		 * them.  We can safely just check for name, for without the
 		 * name, we can't allocate the TFM.
 		 */
-		if (!sctp_hmac_list[id].hmac_name)
+		if (!sctp_hmac_list[id].hmac_name) {
+			id = 0;
 			continue;
+		}
 
 		break;
 	}
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index ca44917..fbb7077 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -916,6 +916,11 @@
 	/* Walk through the addrs buffer and count the number of addresses. */
 	addr_buf = kaddrs;
 	while (walk_size < addrs_size) {
+		if (walk_size + sizeof(sa_family_t) > addrs_size) {
+			kfree(kaddrs);
+			return -EINVAL;
+		}
+
 		sa_addr = (struct sockaddr *)addr_buf;
 		af = sctp_get_af_specific(sa_addr->sa_family);
 
@@ -1002,9 +1007,13 @@
 	/* Walk through the addrs buffer and count the number of addresses. */
 	addr_buf = kaddrs;
 	while (walk_size < addrs_size) {
+		if (walk_size + sizeof(sa_family_t) > addrs_size) {
+			err = -EINVAL;
+			goto out_free;
+		}
+
 		sa_addr = (union sctp_addr *)addr_buf;
 		af = sctp_get_af_specific(sa_addr->sa.sa_family);
-		port = ntohs(sa_addr->v4.sin_port);
 
 		/* If the address family is not supported or if this address
 		 * causes the address buffer to overflow return EINVAL.
@@ -1014,6 +1023,8 @@
 			goto out_free;
 		}
 
+		port = ntohs(sa_addr->v4.sin_port);
+
 		/* Save current address so we can work with it */
 		memcpy(&to, sa_addr, af->sockaddr_len);
 
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 5b7c86e..7ef429c 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -427,7 +427,7 @@
 				if (sym->name && !sym_is_choice_value(sym)) {
 					printf("CONFIG_%s\n", sym->name);
 				}
-			} else {
+			} else if (input_mode != oldnoconfig) {
 				if (!conf_cnt++)
 					printf(_("*\n* Restart config...\n*\n"));
 				rootEntry = menu_get_parent_menu(menu);
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 6ee2e4f..170459c 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -165,7 +165,6 @@
 	struct symbol *sym;
 	struct property *prompt;
 	struct expr *dep;
-	struct expr *dir_dep;
 	unsigned int flags;
 	char *help;
 	struct file *file;
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 4fb5902..edda8b4 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -107,7 +107,6 @@
 void menu_add_dep(struct expr *dep)
 {
 	current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep));
-	current_entry->dir_dep = current_entry->dep;
 }
 
 void menu_set_type(int type)
@@ -291,10 +290,6 @@
 		for (menu = parent->list; menu; menu = menu->next)
 			menu_finalize(menu);
 	} else if (sym) {
-		/* ignore inherited dependencies for dir_dep */
-		sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep));
-		sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr);
-
 		basedep = parent->prompt ? parent->prompt->visible.expr : NULL;
 		basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
 		basedep = expr_eliminate_dups(expr_transform(basedep));
@@ -325,6 +320,8 @@
 			parent->next = last_menu->next;
 			last_menu->next = NULL;
 		}
+
+		sym->dir_dep.expr = parent->dep;
 	}
 	for (menu = parent->list; menu; menu = menu->next) {
 		if (sym && sym_is_choice(sym) &&
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 943712c..1f8b305 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -350,6 +350,7 @@
 				}
 			}
 		calc_newval:
+#if 0
 			if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) {
 				fprintf(stderr, "warning: (");
 				expr_fprint(sym->rev_dep.expr, stderr);
@@ -358,6 +359,7 @@
 				expr_fprint(sym->dir_dep.expr, stderr);
 				fprintf(stderr, ")\n");
 			}
+#endif
 			newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri);
 		}
 		if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN)
diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index a7868ad..cbbed0d 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -535,13 +535,15 @@
 {
 	struct snd_rawmidi_file *rfile;
 	struct snd_rawmidi *rmidi;
+	struct module *module;
 
 	rfile = file->private_data;
 	rmidi = rfile->rmidi;
 	rawmidi_release_priv(rfile);
 	kfree(rfile);
+	module = rmidi->card->module;
 	snd_card_file_remove(rmidi->card, file);
-	module_put(rmidi->card->module);
+	module_put(module);
 	return 0;
 }
 
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 95148e5..c16c5ba 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1747,6 +1747,8 @@
 		      "HP dv6", STAC_HP_DV5),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3061,
 		      "HP dv6", STAC_HP_DV5), /* HP dv6-1110ax */
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x363e,
+		      "HP DV6", STAC_HP_DV5),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
 		      "HP", STAC_HP_DV5),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ef7aa0a..95aaf56 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -73,6 +73,18 @@
 #define cpu_relax()	asm volatile("":::"memory")
 #endif
 
+#ifdef __mips__
+#include "../../arch/mips/include/asm/unistd.h"
+#define rmb()		asm volatile(					\
+				".set	mips2\n\t"			\
+				"sync\n\t"				\
+				".set	mips0"				\
+				: /* no output */			\
+				: /* no input */			\
+				: "memory")
+#define cpu_relax()	asm volatile("" ::: "memory")
+#endif
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>