arch/arm/mach-mvebu/pm.c - arm/linux - Git at Google

 /*
  * Suspend/resume support. Currently supporting Armada XP only.
  *
  * Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */

 #include <linux/cpu_pm.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mbus.h>
 #include <linux/of_address.h>
 #include <linux/suspend.h>
 #include <asm/cacheflush.h>
 #include <asm/outercache.h>
 #include <asm/suspend.h>

 #include "coherency.h"
 #include "common.h"
 #include "pmsu.h"

 #define SDRAM_CONFIG_OFFS                  0x0
 #define  SDRAM_CONFIG_SR_MODE_BIT          BIT(24)
 #define SDRAM_OPERATION_OFFS               0x18
 #define  SDRAM_OPERATION_SELF_REFRESH      0x7
 #define SDRAM_DLB_EVICTION_OFFS            0x30c
 #define  SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff

 static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
 static void __iomem *sdram_ctrl;

 static int mvebu_pm_powerdown(unsigned long data)
 {
 	u32 reg, srcmd;

 	flush_cache_all();
 	outer_flush_all();

 	/*
 	 * Issue a Data Synchronization Barrier instruction to ensure
 	 * that all state saving has been completed.
 	 */
 	dsb();

 	/* Flush the DLB and wait ~7 usec */
 	reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
 	reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
 	writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);

 	udelay(7);

 	/* Set DRAM in battery backup mode */
 	reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
 	reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
 	writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);

 	/* Prepare to go to self-refresh */

 	srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
 	srcmd &= ~0x1F;
 	srcmd |= SDRAM_OPERATION_SELF_REFRESH;

 	mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);

 	return 0;
 }

 #define BOOT_INFO_ADDR      0x3000
 #define BOOT_MAGIC_WORD	    0xdeadb002
 #define BOOT_MAGIC_LIST_END 0xffffffff

 /*
  * Those registers are accessed before switching the internal register
  * base, which is why we hardcode the 0xd0000000 base address, the one
  * used by the SoC out of reset.
  */
 #define MBUS_WINDOW_12_CTRL       0xd00200b0
 #define MBUS_INTERNAL_REG_ADDRESS 0xd0020080

 #define SDRAM_WIN_BASE_REG(x)	(0x20180 + (0x8*x))
 #define SDRAM_WIN_CTRL_REG(x)	(0x20184 + (0x8*x))

 static phys_addr_t mvebu_internal_reg_base(void)
 {
 	struct device_node *np;
 	__be32 in_addr[2];

 	np = of_find_node_by_name(NULL, "internal-regs");
 	BUG_ON(!np);

 	/*
 	 * Ask the DT what is the internal register address on this
 	 * platform. In the mvebu-mbus DT binding, 0xf0010000
 	 * corresponds to the internal register window.
 	 */
 	in_addr[0] = cpu_to_be32(0xf0010000);
 	in_addr[1] = 0x0;

 	return of_translate_address(np, in_addr);
 }

 static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr)
 {
 	phys_addr_t resume_pc;

 	resume_pc = __pa_symbol(armada_370_xp_cpu_resume);

 	/*
 	 * The bootloader expects the first two words to be a magic
 	 * value (BOOT_MAGIC_WORD), followed by the address of the
 	 * resume code to jump to. Then, it expects a sequence of
 	 * (address, value) pairs, which can be used to restore the
 	 * value of certain registers. This sequence must end with the
 	 * BOOT_MAGIC_LIST_END magic value.
 	 */

 	writel(BOOT_MAGIC_WORD, store_addr++);
 	writel(resume_pc, store_addr++);

 	/*
 	 * Some platforms remap their internal register base address
 	 * to 0xf1000000. However, out of reset, window 12 starts at
 	 * 0xf0000000 and ends at 0xf7ffffff, which would overlap with
 	 * the internal registers. Therefore, disable window 12.
 	 */
 	writel(MBUS_WINDOW_12_CTRL, store_addr++);
 	writel(0x0, store_addr++);

 	/*
 	 * Set the internal register base address to the value
 	 * expected by Linux, as read from the Device Tree.
 	 */
 	writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
 	writel(mvebu_internal_reg_base(), store_addr++);

 	/*
 	 * Ask the mvebu-mbus driver to store the SDRAM window
 	 * configuration, which has to be restored by the bootloader
 	 * before re-entering the kernel on resume.
 	 */
 	store_addr += mvebu_mbus_save_cpu_target(store_addr);

 	writel(BOOT_MAGIC_LIST_END, store_addr);
 }

 static int mvebu_pm_store_bootinfo(void)
 {
 	u32 *store_addr;

 	store_addr = phys_to_virt(BOOT_INFO_ADDR);

 	if (of_machine_is_compatible("marvell,armadaxp"))
 		mvebu_pm_store_armadaxp_bootinfo(store_addr);
 	else
 		return -ENODEV;

 	return 0;
 }

 static int mvebu_enter_suspend(void)
 {
 	int ret;

 	ret = mvebu_pm_store_bootinfo();
 	if (ret)
 		return ret;

 	cpu_pm_enter();

 	cpu_suspend(0, mvebu_pm_powerdown);

 	outer_resume();

 	mvebu_v7_pmsu_idle_exit();

 	set_cpu_coherent();

 	cpu_pm_exit();
 	return 0;
 }

 static int mvebu_pm_enter(suspend_state_t state)
 {
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		cpu_do_idle();
 		break;
 	case PM_SUSPEND_MEM:
 		pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n");
 		return mvebu_enter_suspend();
 	default:
 		return -EINVAL;
 	}
 	return 0;
 }

 static int mvebu_pm_valid(suspend_state_t state)
 {
 	if (state == PM_SUSPEND_STANDBY)
 		return 1;

 	if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL)
 		return 1;

 	return 0;
 }

 static const struct platform_suspend_ops mvebu_pm_ops = {
 	.enter = mvebu_pm_enter,
 	.valid = mvebu_pm_valid,
 };

 static int __init mvebu_pm_init(void)
 {
 	if (!of_machine_is_compatible("marvell,armadaxp") &&
 	    !of_machine_is_compatible("marvell,armada370") &&
 	    !of_machine_is_compatible("marvell,armada380") &&
 	    !of_machine_is_compatible("marvell,armada390"))
 		return -ENODEV;

 	suspend_set_ops(&mvebu_pm_ops);

 	return 0;
 }


 late_initcall(mvebu_pm_init);

 int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
 							u32 srcmd))
 {
 	struct device_node *np;
 	struct resource res;

 	np = of_find_compatible_node(NULL, NULL,
 				     "marvell,armada-xp-sdram-controller");
 	if (!np)
 		return -ENODEV;

 	if (of_address_to_resource(np, 0, &res)) {
 		of_node_put(np);
 		return -ENODEV;
 	}

 	if (!request_mem_region(res.start, resource_size(&res),
 				np->full_name)) {
 		of_node_put(np);
 		return -EBUSY;
 	}

 	sdram_ctrl = ioremap(res.start, resource_size(&res));
 	if (!sdram_ctrl) {
 		release_mem_region(res.start, resource_size(&res));
 		of_node_put(np);
 		return -ENOMEM;
 	}

 	of_node_put(np);

 	mvebu_board_pm_enter = board_pm_enter;

 	return 0;
 }
	/*
	* Suspend/resume support. Currently supporting Armada XP only.
	*
	* Copyright (C) 2014 Marvell
	*
	* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
	*
	* This file is licensed under the terms of the GNU General Public
	* License version 2. This program is licensed "as is" without any
	* warranty of any kind, whether express or implied.
	*/

	#include <linux/cpu_pm.h>
	#include <linux/delay.h>
	#include <linux/gpio.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/mbus.h>
	#include <linux/of_address.h>
	#include <linux/suspend.h>
	#include <asm/cacheflush.h>
	#include <asm/outercache.h>
	#include <asm/suspend.h>

	#include "coherency.h"
	#include "common.h"
	#include "pmsu.h"

	#define SDRAM_CONFIG_OFFS 0x0
	#define SDRAM_CONFIG_SR_MODE_BIT BIT(24)
	#define SDRAM_OPERATION_OFFS 0x18
	#define SDRAM_OPERATION_SELF_REFRESH 0x7
	#define SDRAM_DLB_EVICTION_OFFS 0x30c
	#define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff

	static void (mvebu_board_pm_enter)(void __iomem sdram_reg, u32 srcmd);
	static void __iomem *sdram_ctrl;

	static int mvebu_pm_powerdown(unsigned long data)
	{
	u32 reg, srcmd;

	flush_cache_all();
	outer_flush_all();

	/*
	* Issue a Data Synchronization Barrier instruction to ensure
	* that all state saving has been completed.
	*/
	dsb();

	/* Flush the DLB and wait ~7 usec */
	reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
	reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
	writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);

	udelay(7);

	/* Set DRAM in battery backup mode */
	reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
	reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
	writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);

	/* Prepare to go to self-refresh */

	srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
	srcmd &= ~0x1F;
	srcmd \|= SDRAM_OPERATION_SELF_REFRESH;

	mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);

	return 0;
	}

	#define BOOT_INFO_ADDR 0x3000
	#define BOOT_MAGIC_WORD 0xdeadb002
	#define BOOT_MAGIC_LIST_END 0xffffffff

	/*
	* Those registers are accessed before switching the internal register
	* base, which is why we hardcode the 0xd0000000 base address, the one
	* used by the SoC out of reset.
	*/
	#define MBUS_WINDOW_12_CTRL 0xd00200b0
	#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080

	#define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x))
	#define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x))

	static phys_addr_t mvebu_internal_reg_base(void)
	{
	struct device_node *np;
	__be32 in_addr[2];

	np = of_find_node_by_name(NULL, "internal-regs");
	BUG_ON(!np);

	/*
	* Ask the DT what is the internal register address on this
	* platform. In the mvebu-mbus DT binding, 0xf0010000
	* corresponds to the internal register window.
	*/
	in_addr[0] = cpu_to_be32(0xf0010000);
	in_addr[1] = 0x0;

	return of_translate_address(np, in_addr);
	}

	static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr)
	{
	phys_addr_t resume_pc;

	resume_pc = __pa_symbol(armada_370_xp_cpu_resume);

	/*
	* The bootloader expects the first two words to be a magic
	* value (BOOT_MAGIC_WORD), followed by the address of the
	* resume code to jump to. Then, it expects a sequence of
	* (address, value) pairs, which can be used to restore the
	* value of certain registers. This sequence must end with the
	* BOOT_MAGIC_LIST_END magic value.
	*/

	writel(BOOT_MAGIC_WORD, store_addr++);
	writel(resume_pc, store_addr++);

	/*
	* Some platforms remap their internal register base address
	* to 0xf1000000. However, out of reset, window 12 starts at
	* 0xf0000000 and ends at 0xf7ffffff, which would overlap with
	* the internal registers. Therefore, disable window 12.
	*/
	writel(MBUS_WINDOW_12_CTRL, store_addr++);
	writel(0x0, store_addr++);

	/*
	* Set the internal register base address to the value
	* expected by Linux, as read from the Device Tree.
	*/
	writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
	writel(mvebu_internal_reg_base(), store_addr++);

	/*
	* Ask the mvebu-mbus driver to store the SDRAM window
	* configuration, which has to be restored by the bootloader
	* before re-entering the kernel on resume.
	*/
	store_addr += mvebu_mbus_save_cpu_target(store_addr);

	writel(BOOT_MAGIC_LIST_END, store_addr);
	}

	static int mvebu_pm_store_bootinfo(void)
	{
	u32 *store_addr;

	store_addr = phys_to_virt(BOOT_INFO_ADDR);

	if (of_machine_is_compatible("marvell,armadaxp"))
	mvebu_pm_store_armadaxp_bootinfo(store_addr);
	else
	return -ENODEV;

	return 0;
	}

	static int mvebu_enter_suspend(void)
	{
	int ret;

	ret = mvebu_pm_store_bootinfo();
	if (ret)
	return ret;

	cpu_pm_enter();

	cpu_suspend(0, mvebu_pm_powerdown);

	outer_resume();

	mvebu_v7_pmsu_idle_exit();

	set_cpu_coherent();

	cpu_pm_exit();
	return 0;
	}

	static int mvebu_pm_enter(suspend_state_t state)
	{
	switch (state) {
	case PM_SUSPEND_STANDBY:
	cpu_do_idle();
	break;
	case PM_SUSPEND_MEM:
	pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n");
	return mvebu_enter_suspend();
	default:
	return -EINVAL;
	}
	return 0;
	}

	static int mvebu_pm_valid(suspend_state_t state)
	{
	if (state == PM_SUSPEND_STANDBY)
	return 1;

	if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL)
	return 1;

	return 0;
	}

	static const struct platform_suspend_ops mvebu_pm_ops = {
	.enter = mvebu_pm_enter,
	.valid = mvebu_pm_valid,
	};

	static int __init mvebu_pm_init(void)
	{
	if (!of_machine_is_compatible("marvell,armadaxp") &&
	!of_machine_is_compatible("marvell,armada370") &&
	!of_machine_is_compatible("marvell,armada380") &&
	!of_machine_is_compatible("marvell,armada390"))
	return -ENODEV;

	suspend_set_ops(&mvebu_pm_ops);

	return 0;
	}


	late_initcall(mvebu_pm_init);

	int __init mvebu_pm_suspend_init(void (board_pm_enter)(void __iomem sdram_reg,
	u32 srcmd))
	{
	struct device_node *np;
	struct resource res;

	np = of_find_compatible_node(NULL, NULL,
	"marvell,armada-xp-sdram-controller");
	if (!np)
	return -ENODEV;

	if (of_address_to_resource(np, 0, &res)) {
	of_node_put(np);
	return -ENODEV;
	}

	if (!request_mem_region(res.start, resource_size(&res),
	np->full_name)) {
	of_node_put(np);
	return -EBUSY;
	}

	sdram_ctrl = ioremap(res.start, resource_size(&res));
	if (!sdram_ctrl) {
	release_mem_region(res.start, resource_size(&res));
	of_node_put(np);
	return -ENOMEM;
	}

	of_node_put(np);

	mvebu_board_pm_enter = board_pm_enter;

	return 0;
	}