diff --git a/.gitignore b/.gitignore
index 9c0d650..d24ad50 100644
--- a/.gitignore
+++ b/.gitignore
@@ -52,6 +52,7 @@
 
 # cscope files
 cscope.*
+ncscope.*
 
 *.orig
 *~
diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
index 5ac1e01..5f50097 100644
--- a/Documentation/ABI/testing/sysfs-class-bdi
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -14,6 +14,10 @@
 	non-block filesystems which provide their own BDI, such as NFS
 	and FUSE.
 
+MAJOR:MINOR-fuseblk
+
+	Value of st_dev on fuseblk filesystems.
+
 default
 
 	The default backing dev, used for non-block device backed
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 77c42f4..2510763 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -703,6 +703,31 @@
 </sect1>
 </chapter>
 
+<chapter id="trylock-functions">
+ <title>The trylock Functions</title>
+  <para>
+   There are functions that try to acquire a lock only once and immediately
+   return a value telling about success or failure to acquire the lock.
+   They can be used if you need no access to the data protected with the lock
+   when some other thread is holding the lock. You should acquire the lock
+   later if you then need access to the data protected with the lock.
+  </para>
+
+  <para>
+    <function>spin_trylock()</function> does not spin but returns non-zero if
+    it acquires the spinlock on the first try or 0 if not. This function can
+    be used in all contexts like <function>spin_lock</function>: you must have
+    disabled the contexts that might interrupt you and acquire the spin lock.
+  </para>
+
+  <para>
+    <function>mutex_trylock()</function> does not suspend your task
+    but returns non-zero if it could lock the mutex on the first try
+    or 0 if not. This function cannot be safely used in hardware or software
+    interrupt contexts despite not sleeping.
+  </para>
+</chapter>
+
   <chapter id="Examples">
    <title>Common Examples</title>
     <para>
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 9c93a03..118ca6e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -327,6 +327,52 @@
 now, but you can do this to mark internal company procedures or just
 point out some special detail about the sign-off. 
 
+If you are a subsystem or branch maintainer, sometimes you need to slightly
+modify patches you receive in order to merge them, because the code is not
+exactly the same in your tree and the submitters'. If you stick strictly to
+rule (c), you should ask the submitter to rediff, but this is a totally
+counter-productive waste of time and energy. Rule (b) allows you to adjust
+the code, but then it is very impolite to change one submitter's code and
+make him endorse your bugs. To solve this problem, it is recommended that
+you add a line between the last Signed-off-by header and yours, indicating
+the nature of your changes. While there is nothing mandatory about this, it
+seems like prepending the description with your mail and/or name, all
+enclosed in square brackets, is noticeable enough to make it obvious that
+you are responsible for last-minute changes. Example :
+
+	Signed-off-by: Random J Developer <random@developer.example.org>
+	[lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
+	Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
+
+This practise is particularly helpful if you maintain a stable branch and
+want at the same time to credit the author, track changes, merge the fix,
+and protect the submitter from complaints. Note that under no circumstances
+can you change the author's identity (the From header), as it is the one
+which appears in the changelog.
+
+Special note to back-porters: It seems to be a common and useful practise
+to insert an indication of the origin of a patch at the top of the commit
+message (just after the subject line) to facilitate tracking. For instance,
+here's what we see in 2.6-stable :
+
+    Date:   Tue May 13 19:10:30 2008 +0000
+
+        SCSI: libiscsi regression in 2.6.25: fix nop timer handling
+
+        commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
+
+And here's what appears in 2.4 :
+
+    Date:   Tue May 13 22:12:27 2008 +0200
+
+        wireless, airo: waitbusy() won't delay
+
+        [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
+
+Whatever the format, this information provides a valuable help to people
+tracking your trees, and to people trying to trouble-shoot bugs in your
+tree.
+
 
 13) When to use Acked-by: and Cc:
 
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index 6a9c55b..dcec056 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -129,14 +129,6 @@
 intervals the CPU needs to be on average more than 80% in use to then
 decide that the CPU frequency needs to be increased.  
 
-sampling_down_factor: this parameter controls the rate that the CPU
-makes a decision on when to decrease the frequency.  When set to its
-default value of '5' it means that at 1/5 the sampling_rate the kernel
-makes a decision to lower the frequency.  Five "lower rate" decisions
-have to be made in a row before the CPU frequency is actually lower.
-If set to '1' then the frequency decreases as quickly as it increases,
-if set to '2' it decreases at half the rate of the increase.
-
 ignore_nice_load: this parameter takes a value of '0' or '1'. When
 set to '0' (its default), all processes are counted towards the
 'cpu utilisation' value.  When set to '1', the processes that are
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index fb7b361..d803c5c 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -199,7 +199,7 @@
 The following rules apply to each cpuset:
 
  - Its CPUs and Memory Nodes must be a subset of its parents.
- - It can only be marked exclusive if its parent is.
+ - It can't be marked exclusive unless its parent is.
  - If its cpu or memory is exclusive, they may not overlap any sibling.
 
 These rules, and the natural hierarchy of cpusets, enable efficient
@@ -345,7 +345,7 @@
 flag, and if set, a call to a new routine cpuset_mem_spread_node()
 returns the node to prefer for the allocation.
 
-Similarly, setting 'memory_spread_cache' turns on the flag
+Similarly, setting 'memory_spread_slab' turns on the flag
 PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
 pages from the node returned by cpuset_mem_spread_node().
 
@@ -709,7 +709,10 @@
 
 In this directory you can find several files:
 # ls
-cpus  cpu_exclusive  mems  mem_exclusive mem_hardwall  tasks
+cpu_exclusive  memory_migrate      mems                      tasks
+cpus           memory_pressure     notify_on_release
+mem_exclusive  memory_spread_page  sched_load_balance
+mem_hardwall   memory_spread_slab  sched_relax_domain_level
 
 Reading them will give you information about the state of this cpuset:
 the CPUs and Memory Nodes it can use, the processes that are using
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 560f88d..0c5086db 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -139,8 +139,16 @@
 			Setting it to very large values will improve
 			performance.
 
-barrier=1		This enables/disables barriers.  barrier=0 disables
-			it, barrier=1 enables it.
+barrier=<0|1(*)>	This enables/disables the use of write barriers in
+			the jbd code.  barrier=0 disables, barrier=1 enables.
+			This also requires an IO stack which can support
+			barriers, and if jbd gets an error on a barrier
+			write, it will disable again with a warning.
+			Write barriers enforce proper on-disk ordering
+			of journal commits, making volatile disk write caches
+			safe to use, at some performance penalty.  If
+			your disks are battery-backed in one way or another,
+			disabling barriers may safely improve performance.
 
 orlov		(*)	This enables the new Orlov block allocator. It is
 			enabled by default.
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
new file mode 100644
index 0000000..2fefaf5
--- /dev/null
+++ b/Documentation/hwmon/ibmaem
@@ -0,0 +1,37 @@
+Kernel driver ibmaem
+======================
+
+Supported systems:
+  * Any recent IBM System X server with Active Energy Manager support.
+    This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
+    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    driver ("ipmi-si") needs to be loaded for this driver to do anything.
+    Prefix: 'ibmaem'
+    Datasheet: Not available
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the energy and power
+meters available on various IBM System X hardware through the BMC.  All
+sensor banks will be exported as platform devices; this driver can talk
+to both v1 and v2 interfaces.  This driver is completely separate from the
+older ibmpex driver.
+
+The v1 AEM interface has a simple set of features to monitor energy use.
+There is a register that displays an estimate of raw energy consumption
+since the last BMC reset, and a power sensor that returns average power
+use over a configurable interval.
+
+The v2 AEM interface is a bit more sophisticated, being able to present
+a wider range of energy and power use registers, the power cap as
+set by the AEM software, and temperature sensors.
+
+Special Features
+----------------
+
+The "power_cap" value displays the current system power cap, as set by
+the Active Energy Manager software.  Setting the power cap from the host
+is not currently supported.
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 2075c06..0bd3274 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -1,6 +1,105 @@
 kernel-doc nano-HOWTO
 =====================
 
+How to format kernel-doc comments
+---------------------------------
+
+In order to provide embedded, 'C' friendly, easy to maintain,
+but consistent and extractable documentation of the functions and
+data structures in the Linux kernel, the Linux kernel has adopted
+a consistent style for documenting functions and their parameters,
+and structures and their members.
+
+The format for this documentation is called the kernel-doc format.
+It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
+
+This style embeds the documentation within the source files, using
+a few simple conventions.  The scripts/kernel-doc perl script, some
+SGML templates in Documentation/DocBook, and other tools understand
+these conventions, and are used to extract this embedded documentation
+into various documents.
+
+In order to provide good documentation of kernel functions and data
+structures, please use the following conventions to format your
+kernel-doc comments in Linux kernel source.
+
+We definitely need kernel-doc formatted documentation for functions
+that are exported to loadable modules using EXPORT_SYMBOL.
+
+We also look to provide kernel-doc formatted documentation for
+functions externally visible to other kernel files (not marked
+"static").
+
+We also recommend providing kernel-doc formatted documentation
+for private (file "static") routines, for consistency of kernel
+source code layout.  But this is lower priority and at the
+discretion of the MAINTAINER of that kernel source file.
+
+Data structures visible in kernel include files should also be
+documented using kernel-doc formatted comments.
+
+The opening comment mark "/**" is reserved for kernel-doc comments.
+Only comments so marked will be considered by the kernel-doc scripts,
+and any comment so marked must be in kernel-doc format.  Do not use
+"/**" to be begin a comment block unless the comment block contains
+kernel-doc formatted comments.  The closing comment marker for
+kernel-doc comments can be either "*/" or "**/".
+
+Kernel-doc comments should be placed just before the function
+or data structure being described.
+
+Example kernel-doc function comment:
+
+/**
+ * foobar() - short function description of foobar
+ * @arg1:	Describe the first argument to foobar.
+ * @arg2:	Describe the second argument to foobar.
+ *		One can provide multiple line descriptions
+ *		for arguments.
+ *
+ * A longer description, with more discussion of the function foobar()
+ * that might be useful to those using or modifying it.  Begins with
+ * empty comment line, and may include additional embedded empty
+ * comment lines.
+ *
+ * The longer description can have multiple paragraphs.
+ **/
+
+The first line, with the short description, must be on a single line.
+
+The @argument descriptions must begin on the very next line following
+this opening short function description line, with no intervening
+empty comment lines.
+
+Example kernel-doc data structure comment.
+
+/**
+ * struct blah - the basic blah structure
+ * @mem1:	describe the first member of struct blah
+ * @mem2:	describe the second member of struct blah,
+ *		perhaps with more lines and words.
+ *
+ * Longer description of this structure.
+ **/
+
+The kernel-doc function comments describe each parameter to the
+function, in order, with the @name lines.
+
+The kernel-doc data structure comments describe each structure member
+in the data structure, with the @name lines.
+
+The longer description formatting is "reflowed", losing your line
+breaks.  So presenting carefully formatted lists within these
+descriptions won't work so well; derived documentation will lose
+the formatting.
+
+See the section below "How to add extractable documentation to your
+source files" for more details and notes on how to format kernel-doc
+comments.
+
+Components of the kernel-doc system
+-----------------------------------
+
 Many places in the source tree have extractable documentation in the
 form of block comments above functions.  The components of this system
 are:
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 5a4ef48..28cdc2a 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -715,14 +715,14 @@
 
      * Name: "Gary's Encyclopedia - The Linux Kernel"
        Author: Gary (I suppose...).
-       URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
-       Keywords: links, not found here?.
+       URL: http://slencyclopedia.berlios.de/index.html
+       Keywords: linux, community, everything!
        Description: Gary's Encyclopedia exists to allow the rapid finding
        of documentation and other information of interest to GNU/Linux
        users. It has about 4000 links to external pages in 150 major
        categories. This link is for kernel-specific links, documents,
-       sites... Look there if you could not find here what you were
-       looking for.
+       sites...  This list is now hosted by developer.Berlios.de,
+       but seems not to have been updated since sometime in 1999.
 
      * Name: "The home page of Linux-MM"
        Author: The Linux-MM team.
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 3be8ab2..82fafe0 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -157,6 +157,9 @@
 
 	/* The routine to call when the Guest pings us. */
 	void (*handle_output)(int fd, struct virtqueue *me);
+
+	/* Outstanding buffers */
+	unsigned int inflight;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
@@ -702,6 +705,7 @@
 			errx(1, "Looped descriptor");
 	} while ((i = next_desc(vq, i)) != vq->vring.num);
 
+	vq->inflight++;
 	return head;
 }
 
@@ -719,6 +723,7 @@
 	/* Make sure buffer is written before we update index. */
 	wmb();
 	vq->vring.used->idx++;
+	vq->inflight--;
 }
 
 /* This actually sends the interrupt for this virtqueue */
@@ -726,8 +731,9 @@
 {
 	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
 
-	/* If they don't want an interrupt, don't send one. */
-	if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	/* If they don't want an interrupt, don't send one, unless empty. */
+	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	    && vq->inflight)
 		return;
 
 	/* Send the Guest an interrupt tell them we used something up. */
@@ -1107,6 +1113,7 @@
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
+	vq->inflight = 0;
 
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
@@ -1368,6 +1375,7 @@
 
 	/* Tell Guest what MAC address to use. */
 	add_feature(dev, VIRTIO_NET_F_MAC);
+	add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
 	set_config(dev, sizeof(conf), &conf);
 
 	/* We don't need the socket any more; setup is done. */
diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt
index 770fc41..7960125 100644
--- a/Documentation/networking/arcnet.txt
+++ b/Documentation/networking/arcnet.txt
@@ -46,7 +46,7 @@
 
 
 This new release (2.91) has been put together by David Woodhouse 
-<dwmw2@cam.ac.uk>, in an attempt to tidy up the driver after adding support 
+<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
 for yet another chipset. Now the generic support has been separated from the
 individual chipset drivers, and the source files aren't quite so packed with
 #ifdefs! I've changed this file a bit, but kept it in the first person from
diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt
index bdae2db..bec69a8 100644
--- a/Documentation/networking/bridge.txt
+++ b/Documentation/networking/bridge.txt
@@ -1,6 +1,6 @@
 In order to use the Ethernet bridging functionality, you'll need the
 userspace tools. These programs and documentation are available
-at http://bridge.sourceforge.net.  The download page is
+at http://www.linux-foundation.org/en/Net:Bridge.  The download page is
 http://prdownloads.sourceforge.net/bridge.
 
 If you still have questions, don't hesitate to post to the mailing list 
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 5439573..7cf5685 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -60,7 +60,7 @@
  59 -> DViCO FusionHDTV 5 PCI nano                         [18ac:d530]
  60 -> Pinnacle Hybrid PCTV                                [12ab:1788]
  61 -> Winfast TV2000 XP Global                            [107d:6f18]
- 62 -> PowerColor Real Angel 330                           [14f1:ea3d]
+ 62 -> PowerColor RA330                                    [14f1:ea3d]
  63 -> Geniatech X8000-MT DVBT                             [14f1:8852]
  64 -> DViCO FusionHDTV DVB-T PRO                          [18ac:db30]
  65 -> DViCO FusionHDTV 7 Gold                             [18ac:d610]
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 077d56e..6842c26 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -1,7 +1,9 @@
 Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
 encoder chip:
 
-1) The only hardware currently supported is the Hauppauge HVR-1600.
+1) The only hardware currently supported is the Hauppauge HVR-1600
+   card and the Compro VideoMate H900 (note that this card only
+   supports analog input, it has no digital tuner!).
 
 2) Some people have problems getting the i2c bus to work. Cause unknown.
    The symptom is that the eeprom cannot be read and the card is
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
new file mode 100644
index 0000000..ce72c0f
--- /dev/null
+++ b/Documentation/vm/pagemap.txt
@@ -0,0 +1,77 @@
+pagemap, from the userspace perspective
+---------------------------------------
+
+pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
+userspace programs to examine the page tables and related information by
+reading files in /proc.
+
+There are three components to pagemap:
+
+ * /proc/pid/pagemap.  This file lets a userspace process find out which
+   physical frame each virtual page is mapped to.  It contains one 64-bit
+   value for each virtual page, containing the following data (from
+   fs/proc/task_mmu.c, above pagemap_read):
+
+    * Bits 0-55  page frame number (PFN) if present
+    * Bits 0-4   swap type if swapped
+    * Bits 5-55  swap offset if swapped
+    * Bits 55-60 page shift (page size = 1<<page shift)
+    * Bit  61    reserved for future use
+    * Bit  62    page swapped
+    * Bit  63    page present
+
+   If the page is not present but in swap, then the PFN contains an
+   encoding of the swap file number and the page's offset into the
+   swap. Unmapped pages return a null PFN. This allows determining
+   precisely which pages are mapped (or in swap) and comparing mapped
+   pages between processes.
+
+   Efficient users of this interface will use /proc/pid/maps to
+   determine which areas of memory are actually mapped and llseek to
+   skip over unmapped regions.
+
+ * /proc/kpagecount.  This file contains a 64-bit count of the number of
+   times each page is mapped, indexed by PFN.
+
+ * /proc/kpageflags.  This file contains a 64-bit set of flags for each
+   page, indexed by PFN.
+
+   The flags are (from fs/proc/proc_misc, above kpageflags_read):
+
+     0. LOCKED
+     1. ERROR
+     2. REFERENCED
+     3. UPTODATE
+     4. DIRTY
+     5. LRU
+     6. ACTIVE
+     7. SLAB
+     8. WRITEBACK
+     9. RECLAIM
+    10. BUDDY
+
+Using pagemap to do something useful:
+
+The general procedure for using pagemap to find out about a process' memory
+usage goes like this:
+
+ 1. Read /proc/pid/maps to determine which parts of the memory space are
+    mapped to what.
+ 2. Select the maps you are interested in -- all of them, or a particular
+    library, or the stack or the heap, etc.
+ 3. Open /proc/pid/pagemap and seek to the pages you would like to examine.
+ 4. Read a u64 for each page from pagemap.
+ 5. Open /proc/kpagecount and/or /proc/kpageflags.  For each PFN you just
+    read, seek to that entry in the file, and read the data you want.
+
+For example, to find the "unique set size" (USS), which is the amount of
+memory that a process is using that is not shared with any other process,
+you can go through every map in the process, find the PFNs, look those up
+in kpagecount, and tally up the number of pages that are only referenced
+once.
+
+Other notes:
+
+Reading from any of the files will return -EINVAL if you are not starting
+the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes
+into the file), or if the size of the read is not a multiple of 8 bytes.
diff --git a/MAINTAINERS b/MAINTAINERS
index b42dcfc..cb71eb4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1240,6 +1240,20 @@
 W:	http://linuxtv.org
 S:	Maintained
 
+CXGB3 ETHERNET DRIVER (CXGB3)
+P:	Divy Le Ray
+M:	divy@chelsio.com
+L:	netdev@vger.kernel.org
+W:	http://www.chelsio.com
+S:	Supported
+
+CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
+P:	Steve Wise
+M:	swise@chelsio.com
+L:	general@lists.openfabrics.org
+W:	http://www.openfabrics.org
+S:	Supported
+
 CYBERPRO FB DRIVER
 P:	Russell King
 M:	rmk@arm.linux.org.uk
@@ -1597,7 +1611,7 @@
 P:	Stephen Hemminger
 M:	shemminger@linux-foundation.org
 L:	bridge@lists.linux-foundation.org
-W:	http://bridge.sourceforge.net/
+W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
 
 ETHERTEAM 16I DRIVER
@@ -2551,7 +2565,6 @@
 P:	Chris Wright
 M:	chrisw@sous-sol.org
 L:	linux-security-module@vger.kernel.org
-W:	http://lsm.immunix.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
 S:	Supported
 
@@ -2852,8 +2865,8 @@
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 P:	Faisal Latif
 M:	flatif@neteffect.com
-P:	Nishi Gupta
-M:	ngupta@neteffect.com
+P:	Chien Tung
+M:	ctung@neteffect.com
 P:	Glenn Streiff
 M:	gstreiff@neteffect.com
 L:	general@lists.openfabrics.org
@@ -3251,7 +3264,7 @@
 
 PPP OVER ETHERNET
 P:	Michal Ostrowski
-M:	mostrows@speakeasy.net
+M:	mostrows@earthlink.net
 S:	Maintained
 
 PPP OVER L2TP
@@ -3425,10 +3438,7 @@
 S:	Maintained
 
 REISERFS FILE SYSTEM
-P:	Hans Reiser
-M:	reiserfs-dev@namesys.com
 L:	reiserfs-devel@vger.kernel.org
-W:	http://www.namesys.com
 S:	Supported
 
 RFKILL
@@ -4361,6 +4371,14 @@
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+UTIL-LINUX-NG PACKAGE
+P:	Karel Zak
+M:	kzak@redhat.com
+L:	util-linux-ng@vger.kernel.org
+W:	http://kernel.org/~kzak/util-linux-ng/
+T:	git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+S:	Maintained
+
 VFAT/FAT/MSDOS FILESYSTEM:
 P:	OGAWA Hirofumi
 M:	hirofumi@mail.parknet.co.jp
diff --git a/Makefile b/Makefile
index 20b3235..2b95120 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 26
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Funky Weasel is Jiggy wit it
 
 # *DOCUMENTATION*
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 67ea99e..dd3fbd6 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -33,10 +33,6 @@
 		bic	r0, r0, #0x1000		@ clear Icache
 		mcr	p15, 0, r0, c1, c0, 0
 
-#ifdef CONFIG_ARCH_COTULLA_IDP
-		mov	r7, #MACH_TYPE_COTULLA_IDP
-#endif
-
 #ifdef CONFIG_ARCH_IXP2000
 		mov	r1, #-1
 		mov	r0, #0xd6000000
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 1de121f..f446477 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -16,16 +16,32 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/at91x40.h>
 #include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
 #include "generic.h"
 
 /*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
  */
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
 
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 92d79fb..62e653a 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -369,7 +369,8 @@
 
 	lm_set_drvdata(dev, impd1);
 
-	printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+	printk("IM-PD1 found at 0x%08lx\n",
+		(unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
 		impd1->vcos[i].owner = THIS_MODULE,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d55fa4e..c07f497 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -405,7 +405,6 @@
 		addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
 		v3_readb(V3_LB_ISTAT));
 	printk(KERN_DEBUG "%s", buf);
-	printascii(buf);
 #endif
 
 	v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@
 	unsigned long pc = instruction_pointer(regs);
 	unsigned long instr = *(unsigned long *)pc;
 	char buf[128];
+	extern void printascii(const char *);
 
 	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
 		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a0b16a7..a4d2012 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -24,7 +24,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
@@ -315,14 +314,6 @@
 #define palmte_get_power_status	NULL
 #endif
 
-static struct tsc2102_config palmte_tsc2102_config = {
-	.use_internal	= 0,
-	.monitor	= TSC_BAT1 | TSC_AUX | TSC_TEMP,
-	.temp_at25c	= { 2200, 2615 },
-	.apm_report	= palmte_get_power_status,
-	.alsa_config	= &palmte_alsa_config,
-};
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_MMC,		&palmte_mmc_config },
@@ -336,7 +327,6 @@
 		.bus_num	= 2,	/* uWire (officially) */
 		.chip_select	= 0,	/* As opposed to 3 */
 		.irq		= OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
-		.platform_data	= &palmte_tsc2102_config,
 		.max_speed_hz	= 8000000,
 	},
 };
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6d4416a..f5851d1 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -59,7 +59,7 @@
 	[2] = {
 		.start = CMX270_ETHIRQ,
 		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index edc4f07..9c57700 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -50,7 +50,7 @@
 	[2] = {
 		.start = EM_X270_ETHIRQ,
 		.end   = EM_X270_ETHIRQ,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dace382..e7d0fcd 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,7 +38,6 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c2cbd66..ab4a9f5 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,8 +467,8 @@
 
 static void tosa_poweroff(void)
 {
-	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+	gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+	gpio_set_value(TOSA_GPIO_ON_RESET, 1);
 
 	mdelay(1000);
 	arm_machine_restart('h');
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 661a235..27f63d5 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -374,7 +374,7 @@
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index c564233..4c4b5c4 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -263,7 +263,7 @@
 	[2] = {
 		.start = IRQ_VR1000_DM9000A,
 		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };
@@ -282,7 +282,7 @@
 	[2] = {
 		.start = IRQ_VR1000_DM9000N,
 		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 };
 
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6496eb6..2f772a3 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -225,26 +225,28 @@
 	int ret = 0;
 
 	/* cpu initialize */
-	GAFR = ( GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
-		 GPIO_32_768kHz );
+	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+		GPIO_MCP_CLK | GPIO_32_768kHz;
 
-	GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
-		 GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
-		 GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
-	GPLR = GPIO_GPIO18;
+	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
 
-	// PPC pin setting
-	PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
-		 PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
-	 	 PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
+	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
 
-	PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
+	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
 
-	GAFR |= GPIO_32_768kHz;
-	GPDR |= GPIO_32_768kHz;
-	TUCR  = TUCR_32_768kHz;
+	PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+	PCFR = PCFR_OPDE;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2946c19..2db5580 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/cpufreq.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index f197bb3..2f01af5 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -65,6 +65,7 @@
 
 	/* rename any peripherals used differing from the s3c2410 */
 
+	s3c_device_sdi.name  = "s3c2440-sdi";
 	s3c_device_i2c.name  = "s3c2440-i2c";
 	s3c_device_nand.name = "s3c2440-nand";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 0604607..119edb8 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:20:41 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:59 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -37,17 +37,15 @@
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -61,11 +59,13 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -73,11 +73,21 @@
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -101,10 +111,15 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -141,16 +156,19 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -164,9 +182,10 @@
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -202,6 +221,7 @@
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -255,87 +275,40 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_GRE=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -343,54 +316,25 @@
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
@@ -407,7 +351,6 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -415,6 +358,7 @@
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -450,6 +394,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -531,11 +476,18 @@
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -568,11 +520,13 @@
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -586,6 +540,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -599,7 +554,6 @@
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -621,6 +575,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -633,6 +588,7 @@
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -640,21 +596,13 @@
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -665,27 +613,23 @@
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -702,9 +646,27 @@
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -724,12 +686,22 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -753,14 +725,12 @@
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -772,6 +742,7 @@
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -787,6 +758,7 @@
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -797,11 +769,13 @@
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -816,6 +790,8 @@
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -844,19 +820,22 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -865,10 +844,6 @@
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -885,14 +860,11 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -948,8 +920,10 @@
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -957,12 +931,10 @@
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1030,11 +1002,6 @@
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1042,6 +1009,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1052,7 +1020,9 @@
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,12 +1036,14 @@
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1083,52 +1055,90 @@
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m
@@ -1137,10 +1147,6 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 2fb2ede..c6d02ea 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:07:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:20 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -36,15 +36,15 @@
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,11 +58,13 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -70,11 +72,21 @@
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -98,10 +110,15 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -147,16 +164,19 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -170,9 +190,10 @@
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -208,6 +229,7 @@
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -252,8 +274,10 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -279,6 +303,7 @@
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -314,6 +339,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -368,6 +394,7 @@
 #
 CONFIG_MTD_DATAFLASH=m
 CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -395,13 +422,18 @@
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -444,6 +476,9 @@
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -469,11 +504,13 @@
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -487,6 +524,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -500,7 +538,6 @@
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -556,6 +593,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -568,6 +606,7 @@
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -575,21 +614,13 @@
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -600,27 +631,23 @@
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -637,9 +664,27 @@
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -659,12 +704,22 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -682,8 +737,8 @@
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -749,7 +804,11 @@
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -761,14 +820,12 @@
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -781,6 +838,7 @@
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -796,6 +854,7 @@
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -806,17 +865,20 @@
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
 #
 # LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=m
 CONFIG_LEDS_GPIO=m
 
 #
@@ -825,6 +887,8 @@
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -853,19 +917,22 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -874,10 +941,6 @@
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -895,14 +958,11 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -957,8 +1017,10 @@
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -966,7 +1028,6 @@
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1028,11 +1089,6 @@
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1096,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,7 +1107,9 @@
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1064,12 +1123,14 @@
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1081,52 +1142,90 @@
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 45e23e0..5a4ae6b 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 22:54:34 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:33:05 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -39,17 +39,15 @@
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 # CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -63,11 +61,13 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +75,20 @@
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -103,10 +112,15 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -152,16 +166,19 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -175,9 +192,10 @@
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -234,8 +252,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -260,6 +276,7 @@
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -295,6 +312,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -349,6 +367,7 @@
 #
 CONFIG_MTD_DATAFLASH=m
 CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -376,13 +395,18 @@
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -427,6 +451,9 @@
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -447,6 +474,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -460,7 +488,6 @@
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -516,6 +543,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -528,6 +556,7 @@
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -535,21 +564,13 @@
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -560,27 +581,23 @@
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -597,9 +614,27 @@
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -619,12 +654,22 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -682,7 +727,11 @@
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -694,14 +743,12 @@
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -714,6 +761,7 @@
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -729,6 +777,7 @@
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -739,17 +788,20 @@
 CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=m
 CONFIG_LEDS_GPIO=y
 
 #
@@ -758,6 +810,8 @@
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -786,19 +840,22 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -807,11 +864,8 @@
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 CONFIG_UIO=m
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -828,14 +882,11 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -891,8 +942,10 @@
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
@@ -943,11 +996,6 @@
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -955,6 +1003,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -965,6 +1014,7 @@
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -978,12 +1028,14 @@
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1000,6 +1052,8 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 634c527..a0912fb 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:04:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:34:57 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -34,15 +34,15 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,24 +54,38 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -115,16 +129,19 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -134,20 +151,7 @@
 #
 # CPU Frequency scaling
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
+# CONFIG_CPU_FREQ is not set
 
 #
 # Bus options
@@ -197,8 +201,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -222,6 +224,7 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -255,6 +258,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -321,6 +325,7 @@
 # CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -346,6 +351,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -358,6 +364,7 @@
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -365,15 +372,9 @@
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -389,9 +390,24 @@
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -411,12 +427,22 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -434,8 +460,8 @@
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -467,14 +493,12 @@
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
@@ -485,6 +509,7 @@
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -499,8 +524,11 @@
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -519,15 +547,17 @@
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -536,18 +566,14 @@
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -580,7 +606,6 @@
 # CONFIG_NETWORK_FILESYSTEMS is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -588,6 +613,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -608,6 +634,8 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 80f55f8..84a7d44 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -29,7 +29,9 @@
  */
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);
+
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
 
 /*
  * Userspace access stuff.
@@ -41,6 +43,8 @@
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(clear_user);
 EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(strnlen_user);
+
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
 
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
index 235524b..5dd8d25 100644
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -108,5 +108,4 @@
 {
 	return cpufreq_register_driver(&at32_driver);
 }
-
-arch_initcall(at32_cpufreq_init);
+late_initcall(at32_cpufreq_init);
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index e698554..3a3e961 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -10,8 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/blackfin.h>
 #include <asm/gptimers.h>
 
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 7bfbd95..f061f51 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -67,7 +67,7 @@
 	CSYNC();
 }
 
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
 int kstack_depth_to_print = 48;
 
@@ -366,7 +366,7 @@
 		info.si_code = ILL_CPLB_MULHIT;
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-		if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START)
+		if (saved_dcplb_fault_addr < FIXED_CODE_START)
 			printk(KERN_NOTICE "NULL pointer access\n");
 		else
 #endif
@@ -421,7 +421,7 @@
 		info.si_code = ILL_CPLB_MULHIT;
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-		if (saved_icplb_fault_addr < (void *)FIXED_CODE_START)
+		if (saved_icplb_fault_addr < FIXED_CODE_START)
 			printk(KERN_NOTICE "Jump to NULL address\n");
 		else
 #endif
@@ -939,8 +939,6 @@
 
 	oops_in_progress = 1;
 
-	printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
-	printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
 	dump_bfin_process(fp);
 	dump_bfin_mem(fp);
 	show_regs(fp);
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 3daf960..4685b7a 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -76,4 +76,4 @@
 		R0 = R0 + R1;
 .Lword8_loop_e: W[P0] = R0;
 	RTS;
-ENDPROC(_outsw)
+ENDPROC(_outsw_8)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index bb6d58c..5958eec 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -451,9 +451,6 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -647,10 +644,10 @@
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF6,
+		.irq			= IRQ_PF8,
 		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num	= 0,
-		.chip_select  = 1,
+		.chip_select  = 2,
 		.controller_data = &spi_ad7877_chip_info,
 	},
 #endif
@@ -676,6 +673,7 @@
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -1018,10 +1016,7 @@
 #endif
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 9d28415..079389c 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -87,9 +87,6 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -189,6 +186,7 @@
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -425,9 +423,7 @@
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index ec05b23..13ae495 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -161,9 +161,6 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -320,6 +317,7 @@
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -626,10 +624,8 @@
 	SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 87e450f..c94f7a5 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP)            += stamp.o led.o
+obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S
deleted file mode 100644
index 4e9ea42..0000000
--- a/arch/blackfin/mach-bf537/boards/led.S
+++ /dev/null
@@ -1,183 +0,0 @@
-/****************************************************
- * LED1 ---- PF6        LED2 ---- PF7               *
- * LED3 ---- PF8        LED4 ---- PF9               *
- * LED5 ---- PF10       LED6 ---- PF11              *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
-   So there is no need to save any registers before calling them.  */
-
-	.text;
-
-/* Initialize LEDs.  */
-
-ENTRY(_led_init)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R0;
-	[--SP] = R1;
-	[--SP] = R2;
-	R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
-	R2 = ~R1;
-
-	P0.H = hi(PORTF_FER);
-	P0.L = lo(PORTF_FER);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	P0.H = hi(PORTFIO_DIR);
-	P0.L = lo(PORTFIO_DIR);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 | R1;
-	W[P0] = R0.L;
-	SSYNC;
-
-	P0.H = hi(PORTFIO_INEN);
-	P0.L = lo(PORTFIO_INEN);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	R2 = [SP++];
-	R1 = [SP++];
-	R0 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
-   It expects the LED number passed through R0.  */
-
-ENTRY(_led_on)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 | R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged.  */
-
-ENTRY(_led_off)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	R1 = ~R1;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged.  */
-
-ENTRY(_led_toggle)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 ^ R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format.  */
-
-ENTRY(_led_disp_num)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R2 = 6(X);
-	R0 <<= R2;
-	R1 <<= R2;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R2 = W[P0](Z);
-	SSYNC;
-	R1 = ~R1;
-	R2 = R2 & R1;
-	R2 = R2 | R0;
-	W[P0] = R2.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format.  */
-
-ENTRY(_led_toggle_num)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R1 = 6(X);
-	R0 <<= R1;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R1 = W[P0](Z);
-	SSYNC;
-	R1 = R1 ^ R0;
-	W[P0] = R1.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9a756d1..671f9d6 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -400,9 +400,6 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -629,6 +626,7 @@
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -939,10 +937,7 @@
 #endif
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index eed161d..319ef54 100644
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -2,5 +2,5 @@
 # arch/blackfin/mach-bf548/boards/Makefile
 #
 
-obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN548_BLUETECHNIX_CM)   += cm_bf548.o
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 3b74f96..4f4ae87 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -684,7 +684,7 @@
 
 static int __init cm_bf548_init(void)
 {
-	printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index d1682bb..af7c211 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -412,8 +412,6 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 /* SPI flash chip (m25p16) */
@@ -481,7 +479,7 @@
 };
 #endif
 
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 	{
@@ -527,6 +525,7 @@
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -800,10 +799,7 @@
 
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bf54x_spi_board_info,
-			ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 	return 0;
 }
diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S
deleted file mode 100644
index f47daf3..0000000
--- a/arch/blackfin/mach-bf548/boards/led.S
+++ /dev/null
@@ -1,172 +0,0 @@
-/****************************************************
- * LED1 ---- PG6        LED2 ---- PG7               *
- * LED3 ---- PG8        LED4 ---- PG9               *
- * LED5 ---- PG10       LED6 ---- PG11              *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
-   So there is no need to save any registers before calling them.  */
-
-	.text;
-
-/* Initialize LEDs.  */
-
-ENTRY(_led_init)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R0;
-	[--SP] = R1;
-	[--SP] = R2;
-	R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
-	R2 = ~R1;
-
-	P0.H = hi(PORTG_FER);
-	P0.L = lo(PORTG_FER);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	P0.H = hi(PORTG_DIR_SET);
-	P0.L = lo(PORTG_DIR_SET);
-	W[P0] = R1.L;
-	SSYNC;
-
-	P0.H = hi(PORTG_INEN);
-	P0.L = lo(PORTG_INEN);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	R2 = [SP++];
-	R1 = [SP++];
-	R0 = [SP++];
-	P0 = [SP++];
-	RTS;
-	.size	_led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
-   It expects the LED number passed through R0.  */
-
-ENTRY(_led_on)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTG_SET);
-	P0.L = lo(PORTG_SET);
-	W[P0] = R1.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged.  */
-
-ENTRY(_led_off)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTG_CLEAR);
-	P0.L = lo(PORTG_CLEAR);
-	W[P0] = R1.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged.  */
-
-ENTRY(_led_toggle)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTG);
-	P0.L = lo(PORTG);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 ^ R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format.  */
-
-ENTRY(_led_disp_num)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R2 = 6(X);
-	R0 <<= R2;
-	R1 <<= R2;
-	P0.H = hi(PORTG);
-	P0.L = lo(PORTG);
-	R2 = W[P0](Z);
-	SSYNC;
-	R1 = ~R1;
-	R2 = R2 & R1;
-	R2 = R2 | R0;
-	W[P0] = R2.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format.  */
-
-ENTRY(_led_toggle_num)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R1 = 6(X);
-	R0 <<= R1;
-	P0.H = hi(PORTG);
-	P0.L = lo(PORTG);
-	R1 = W[P0](Z);
-	SSYNC;
-	R1 = R1 ^ R0;
-	W[P0] = R1.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 61d8f76..bc6fede 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -280,7 +280,6 @@
 };
 #endif
 
-#ifdef CONFIG_SPI_BFIN
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -295,8 +294,8 @@
 	.bits_per_word = 8,
 };
 #endif
-#endif
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -327,6 +326,7 @@
 		.platform_data = &bfin_spi0_info, /* Passed to driver */
 	},
 };
+#endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
@@ -537,10 +537,7 @@
 	SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S
index 81ba28a..53deeb5 100644
--- a/arch/frv/kernel/cmode.S
+++ b/arch/frv/kernel/cmode.S
@@ -1,7 +1,7 @@
 /* cmode.S: clock mode management
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S
index c9b2d51..f67bf73 100644
--- a/arch/frv/kernel/sleep.S
+++ b/arch/frv/kernel/sleep.S
@@ -1,7 +1,7 @@
 /* sleep.S: power saving mode entry
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 4985466..64ee58d 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -1,7 +1,7 @@
 /* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index b841ecf..9af7740 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 #include <asm/segment.h>
@@ -56,7 +57,9 @@
  */
 static unsigned long empty_bad_page_table;
 static unsigned long empty_bad_page;
+
 unsigned long empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 6678c49..80b44ea 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1076,48 +1076,6 @@
 	DBG_FAULT(15)
 	FAULT(15)
 
-	/*
-	 * Squatting in this space ...
-	 *
-	 * This special case dispatcher for illegal operation faults allows preserved
-	 * registers to be modified through a callback function (asm only) that is handed
-	 * back from the fault handler in r8. Up to three arguments can be passed to the
-	 * callback function by returning an aggregate with the callback as its first
-	 * element, followed by the arguments.
-	 */
-ENTRY(dispatch_illegal_op_fault)
-	.prologue
-	.body
-	SAVE_MIN_WITH_COVER
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i		// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i	// restore psr.i
-	adds r3=8,r2	// set up second base pointer for SAVE_REST
-	;;
-	alloc r14=ar.pfs,0,0,1,0	// must be first in insn group
-	mov out0=ar.ec
-	;;
-	SAVE_REST
-	PT_REGS_UNWIND_INFO(0)
-	;;
-	br.call.sptk.many rp=ia64_illegal_op_fault
-.ret0:	;;
-	alloc r14=ar.pfs,0,0,3,0	// must be first in insn group
-	mov out0=r9
-	mov out1=r10
-	mov out2=r11
-	movl r15=ia64_leave_kernel
-	;;
-	mov rp=r15
-	mov b6=r8
-	;;
-	cmp.ne p6,p0=0,r8
-(p6)	br.call.dpnt.many b6=b6		// call returns to ia64_leave_kernel
-	br.sptk.many ia64_leave_kernel
-END(dispatch_illegal_op_fault)
-
 	.org ia64_ivt+0x4000
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4000 Entry 16 (size 64 bundles) Reserved
@@ -1715,6 +1673,48 @@
 	DBG_FAULT(67)
 	FAULT(67)
 
+	/*
+	 * Squatting in this space ...
+	 *
+	 * This special case dispatcher for illegal operation faults allows preserved
+	 * registers to be modified through a callback function (asm only) that is handed
+	 * back from the fault handler in r8. Up to three arguments can be passed to the
+	 * callback function by returning an aggregate with the callback as its first
+	 * element, followed by the arguments.
+	 */
+ENTRY(dispatch_illegal_op_fault)
+	.prologue
+	.body
+	SAVE_MIN_WITH_COVER
+	ssm psr.ic | PSR_DEFAULT_BITS
+	;;
+	srlz.i		// guarantee that interruption collection is on
+	;;
+(p15)	ssm psr.i	// restore psr.i
+	adds r3=8,r2	// set up second base pointer for SAVE_REST
+	;;
+	alloc r14=ar.pfs,0,0,1,0	// must be first in insn group
+	mov out0=ar.ec
+	;;
+	SAVE_REST
+	PT_REGS_UNWIND_INFO(0)
+	;;
+	br.call.sptk.many rp=ia64_illegal_op_fault
+.ret0:	;;
+	alloc r14=ar.pfs,0,0,3,0	// must be first in insn group
+	mov out0=r9
+	mov out1=r10
+	mov out2=r11
+	movl r15=ia64_leave_kernel
+	;;
+	mov rp=r15
+	mov b6=r8
+	;;
+	cmp.ne p6,p0=0,r8
+(p6)	br.call.dpnt.many b6=b6		// call returns to ia64_leave_kernel
+	br.sptk.many ia64_leave_kernel
+END(dispatch_illegal_op_fault)
+
 #ifdef CONFIG_IA32_SUPPORT
 
 	/*
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 7c548ac..74b6d67 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -15,6 +15,9 @@
 #define ACCOUNT_SYS_ENTER
 #endif
 
+.section ".data.patch.rse", "a"
+.previous
+
 /*
  * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
  * the minimum state necessary that allows us to turn psr.ic back
@@ -40,7 +43,7 @@
  * Note that psr.ic is NOT turned on by this macro.  This is so that
  * we can pass interruption state as arguments to a handler.
  */
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA)							\
+#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND)						\
 	mov r16=IA64_KR(CURRENT);	/* M */							\
 	mov r27=ar.rsc;			/* M */							\
 	mov r20=r1;			/* A */							\
@@ -87,6 +90,7 @@
 	tbit.nz p15,p0=r29,IA64_PSR_I_BIT;							\
 	mov r29=b0										\
 	;;											\
+	WORKAROUND;										\
 	adds r16=PT(R8),r1;	/* initialize first base pointer */				\
 	adds r17=PT(R9),r1;	/* initialize second base pointer */				\
 (pKStk)	mov r18=r0;		/* make sure r18 isn't NaT */					\
@@ -206,6 +210,40 @@
 	st8 [r25]=r10;      	/* ar.ssd */	\
 	;;
 
-#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(cover, mov r30=cr.ifs,)
-#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
-#define SAVE_MIN		DO_SAVE_MIN(     , mov r30=r0, )
+#define RSE_WORKAROUND				\
+(pUStk) extr.u r17=r18,3,6;			\
+(pUStk)	sub r16=r18,r22;			\
+[1:](pKStk)	br.cond.sptk.many 1f;		\
+	.xdata4 ".data.patch.rse",1b-.		\
+	;;					\
+	cmp.ge p6,p7 = 33,r17;			\
+	;;					\
+(p6)	mov r17=0x310;				\
+(p7)	mov r17=0x308;				\
+	;;					\
+	cmp.leu p1,p0=r16,r17;			\
+(p1)	br.cond.sptk.many 1f;			\
+	dep.z r17=r26,0,62;			\
+	movl r16=2f;				\
+	;;					\
+	mov ar.pfs=r17;				\
+	dep r27=r0,r27,16,14;			\
+	mov b0=r16;				\
+	;;					\
+	br.ret.sptk b0;				\
+	;;					\
+2:						\
+	mov ar.rsc=r0				\
+	;;					\
+	flushrs;				\
+	;;					\
+	mov ar.bspstore=r22			\
+	;;					\
+	mov r18=ar.bsp;				\
+	;;					\
+1:						\
+	.pred.rel "mutex", pKStk, pUStk
+
+#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN			DO_SAVE_MIN(     , mov r30=r0, , )
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index e0dca87..b83b2c5 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -115,6 +115,29 @@
 	ia64_srlz_i();
 }
 
+/*
+ * Disable the RSE workaround by turning the conditional branch
+ * that we tagged in each place the workaround was used into an
+ * unconditional branch.
+ */
+void __init
+ia64_patch_rse (unsigned long start, unsigned long end)
+{
+	s32 *offp = (s32 *) start;
+	u64 ip, *b;
+
+	while (offp < (s32 *) end) {
+		ip = (u64) offp + *offp;
+
+		b = (u64 *)(ip & -16);
+		b[1] &= ~0xf800000L;
+		ia64_fc((void *) ip);
+		++offp;
+	}
+	ia64_sync_i();
+	ia64_srlz_i();
+}
+
 void __init
 ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
 {
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index e9596cd..f48a809 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -560,6 +560,17 @@
 	/* process SAL system table: */
 	ia64_sal_init(__va(efi.sal_systab));
 
+#ifdef CONFIG_ITANIUM
+	ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+#else
+	{
+		u64 num_phys_stacked;
+
+		if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
+			ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+	}
+#endif
+
 #ifdef CONFIG_SMP
 	cpu_physical_id(0) = hard_smp_processor_id();
 #endif
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 80622ac..5929ab1 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -156,6 +156,13 @@
 	  __end___vtop_patchlist = .;
 	}
 
+  .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+	{
+	  __start___rse_patchlist = .;
+	  *(.data.patch.rse)
+	  __end___rse_patchlist = .;
+	}
+
   .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
 	{
 	  __start___mckinley_e9_bundles = .;
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index dca50da..8e2a0f5 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:41 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index c3cd5b7..e2d511e 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:42 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 073ae4b..6e20d65 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:43 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 0789ede..a0a9b30 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 3e140bf..6778041 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:46 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index ba3a917..7cd3757 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:47 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 4d23f99..0747fa3 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:42:31 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 188847f..e7a8246 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:49 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 983e53d..ab536eb 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:50 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 7707f3f..e05be68 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:51 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index a765f6f..296340d 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:53 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 4315139..8d3a416 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:54 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -59,7 +59,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
index 46f8ee0..043429d 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/au1000/common/clocks.c
@@ -45,6 +45,7 @@
 {
 	return au1x00_clock;
 }
+EXPORT_SYMBOL(get_au1x00_speed);
 
 /*
  * The UART baud base is not known at compile time ... if
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 42d5552..601ee91 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -216,6 +216,17 @@
 }
 EXPORT_SYMBOL(au1xxx_ddma_add_device);
 
+void au1xxx_ddma_del_device(u32 devid)
+{
+	dbdev_tab_t *p = find_dbdev_id(devid);
+
+	if (p != NULL) {
+		memset(p, 0, sizeof(dbdev_tab_t));
+		p->dev_id = ~0;
+	}
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
 /* Allocate a channel and return a non-zero descriptor if successful. */
 u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
        void (*callback)(int, void *), void *callparam)
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index cc02440..65e46a6 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -30,7 +30,6 @@
 obj-$(CONFIG_CPU_MIPS32)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_MIPS64)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_R4000)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R4300)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R4X00)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5000)		+= r4k_fpu.o r4k_switch.o
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cb8b0e2..f9165d1 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -88,15 +88,17 @@
 #ifdef CONFIG_KALLSYMS
 	printk("\n");
 #endif
-#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
-	if (IS_KVA01(sp)) {
-		while (!kstack_end(sp)) {
-			addr = *sp++;
-			if (__kernel_text_address(addr))
-				print_ip_sym(addr);
+	while (!kstack_end(sp)) {
+		unsigned long __user *p =
+			(unsigned long __user *)(unsigned long)sp++;
+		if (__get_user(addr, p)) {
+			printk(" (Bad stack address)");
+			break;
 		}
-		printk("\n");
+		if (__kernel_text_address(addr))
+			print_ip_sym(addr);
 	}
+	printk("\n");
 }
 
 #ifdef CONFIG_KALLSYMS
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 008fd82..fe2cac1 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -58,27 +58,8 @@
 static int mips_cpu_perf_irq;
 extern int cp0_perfcount_irq;
 
-DEFINE_PER_CPU(unsigned int, tickcount);
-#define tickcount_this_cpu __get_cpu_var(tickcount)
-static unsigned long ledbitmask;
-
 static void mips_timer_dispatch(void)
 {
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
-	/*
-	 * Yes, this is very tacky, won't work as expected with SMTC and
-	 * dyntick will break it,
-	 * but it gives me a nice warm feeling during debug
-	 */
-#define LEDBAR 0xbf000408
-	if (tickcount_this_cpu++ >= HZ) {
-		tickcount_this_cpu = 0;
-		change_bit(smp_processor_id(), &ledbitmask);
-		smp_wmb(); /* Make sure every one else sees the change */
-		/* This will pick up any recent changes made by other CPU's */
-		*(unsigned int *)LEDBAR = ledbitmask;
-	}
-#endif
 	do_IRQ(mips_cpu_timer_irq);
 }
 
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index d827d61..cab81f4 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -310,8 +310,8 @@
 	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
 		uasm_i_lui(&buf, AT, 0xa000);
 
-	off = min(8, pref_bias_clear_store / cache_line_size) *
-	      cache_line_size;
+	off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
+	                        * cache_line_size : 0;
 	while (off) {
 		build_clear_pref(&buf, -off);
 		off -= cache_line_size;
@@ -454,12 +454,14 @@
 	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
 		uasm_i_lui(&buf, AT, 0xa000);
 
-	off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
+	off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+	                        cache_line_size : 0;
 	while (off) {
 		build_copy_load_pref(&buf, -off);
 		off -= cache_line_size;
 	}
-	off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
+	off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+	                        cache_line_size : 0;
 	while (off) {
 		build_copy_store_pref(&buf, -off);
 		off -= cache_line_size;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 382738c..76da73a 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -224,8 +224,9 @@
 static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
 {
 	switch (current_cpu_type()) {
-	/* Found by experiment: R4600 v2.0 needs this, too.  */
+	/* Found by experiment: R4600 v2.0/R4700 needs this, too.  */
 	case CPU_R4600:
+	case CPU_R4700:
 	case CPU_R5000:
 	case CPU_R5000A:
 	case CPU_NEVADA:
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
index 1fa0992..b46b3e2 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@@ -14,6 +14,22 @@
 #include <asm/sn/sn0/hub.h>
 
 /*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+	if (size == 1 && where == 0x3d)
+		return 0x01;
+	else if (size == 2 && where == 0x3c)
+		return 0x0100;
+	else if (size == 4 && where == 0x3c)
+		return 0x00000100;
+
+	return 0;
+}
+
+/*
  * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is
  * not really documented, so right now I can't write code which uses it.
  * Therefore we use type 0 accesses for now even though they won't work
@@ -64,7 +80,7 @@
 	 * generic PCI code a chance to look at the wrong register.
 	 */
 	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-		*value = 0;
+		*value = emulate_ioc3_cfg(where, size);
 		return PCIBIOS_SUCCESSFUL;
 	}
 
@@ -127,7 +143,7 @@
 	 * generic PCI code a chance to look at the wrong register.
 	 */
 	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-		*value = 0;
+		*value = emulate_ioc3_cfg(where, size);
 		return PCIBIOS_SUCCESSFUL;
 	}
 
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bb64828..a185169 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,6 +47,9 @@
 	static int num_bridges = 0;
 	bridge_t *bridge;
 	int slot;
+	extern int pci_probe_only;
+
+	pci_probe_only = 1;
 
 	printk("a bridge\n");
 
@@ -100,6 +103,11 @@
 	 */
 	bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
 	                         BRIDGE_CTRL_MEM_SWAP;
+#ifdef CONFIG_PAGE_SIZE_4KB
+	bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
+#else /* 16kB or larger */
+	bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
+#endif
 
 	/*
 	 * Hmm...  IRIX sets additional bits in the address which
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 7093e7c..4a500e8 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -161,27 +161,6 @@
 	return NASID_TO_COMPACT_NODEID(get_nasid());
 }
 
-/* Extracted from the IOC3 meta driver.  FIXME.  */
-static inline void ioc3_sio_init(void)
-{
-	struct ioc3 *ioc3;
-	nasid_t nid;
-	long loops;
-
-	nid = get_nasid();
-	ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
-
-	ioc3->sscr_a = 0;			/* PIO mode for uarta.  */
-	ioc3->sscr_b = 0;			/* PIO mode for uartb.  */
-	ioc3->sio_iec = ~0;
-	ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
-
-	loops=1000000; while(loops--);
-	ioc3->sregs.uarta.iu_fcr = 0;
-	ioc3->sregs.uartb.iu_fcr = 0;
-	loops=1000000; while(loops--);
-}
-
 static inline void ioc3_eth_init(void)
 {
 	struct ioc3 *ioc3;
@@ -234,7 +213,6 @@
 		panic("Kernel compiled for N mode.");
 #endif
 
-	ioc3_sio_init();
 	ioc3_eth_init();
 	per_cpu_init();
 
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index bf438d0..42cd109 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,10 +33,6 @@
 #define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
 
-#define SLOT_IGNORED		0xffff
-
-static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES];
-static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS];
 static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
 
 struct node_data *__node_data[MAX_COMPACT_NODES];
@@ -267,51 +263,6 @@
 	return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT);
 }
 
-/*
- * Return the number of pages of memory provided by the given slot
- * on the specified node.
- */
-static pfn_t __init slot_getsize(cnodeid_t node, int slot)
-{
-	return (pfn_t) slot_psize_cache[node][slot];
-}
-
-/*
- * Return highest slot filled
- */
-static int __init node_getlastslot(cnodeid_t node)
-{
-	return (int) slot_lastfilled_cache[node];
-}
-
-/*
- * Return the pfn of the last free page of memory on a node.
- */
-static pfn_t __init node_getmaxclick(cnodeid_t node)
-{
-	pfn_t	slot_psize;
-	int	slot;
-
-	/*
-	 * Start at the top slot. When we find a slot with memory in it,
-	 * that's the winner.
-	 */
-	for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) {
-		if ((slot_psize = slot_getsize(node, slot))) {
-			if (slot_psize == SLOT_IGNORED)
-				continue;
-			/* Return the basepfn + the slot size, minus 1. */
-			return slot_getbasepfn(node, slot) + slot_psize - 1;
-		}
-	}
-
-	/*
-	 * If there's no memory on the node, return 0. This is likely
-	 * to cause problems.
-	 */
-	return 0;
-}
-
 static pfn_t __init slot_psize_compute(cnodeid_t node, int slot)
 {
 	nasid_t nasid;
@@ -404,13 +355,13 @@
 static void __init szmem(void)
 {
 	pfn_t slot_psize, slot0sz = 0, nodebytes;	/* Hack to detect problem configs */
-	int slot, ignore;
+	int slot;
 	cnodeid_t node;
 
 	num_physpages = 0;
 
 	for_each_online_node(node) {
-		ignore = nodebytes = 0;
+		nodebytes = 0;
 		for (slot = 0; slot < MAX_MEM_SLOTS; slot++) {
 			slot_psize = slot_psize_compute(node, slot);
 			if (slot == 0)
@@ -420,21 +371,20 @@
 			 * kernel text.
 			 */
 			nodebytes += (1LL << SLOT_SHIFT);
+
+			if (!slot_psize)
+				continue;
+
 			if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) >
-						(slot0sz << PAGE_SHIFT))
-				ignore = 1;
-			if (ignore && slot_psize) {
+						(slot0sz << PAGE_SHIFT)) {
 				printk("Ignoring slot %d onwards on node %d\n",
 								slot, node);
-				slot_psize_cache[node][slot] = SLOT_IGNORED;
 				slot = MAX_MEM_SLOTS;
 				continue;
 			}
 			num_physpages += slot_psize;
-			slot_psize_cache[node][slot] =
-					(unsigned short) slot_psize;
-			if (slot_psize)
-				slot_lastfilled_cache[node] = slot;
+			add_active_range(node, slot_getbasepfn(node, slot),
+					 slot_getbasepfn(node, slot) + slot_psize);
 		}
 	}
 }
@@ -442,18 +392,20 @@
 static void __init node_mem_init(cnodeid_t node)
 {
 	pfn_t slot_firstpfn = slot_getbasepfn(node, 0);
-	pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0);
 	pfn_t slot_freepfn = node_getfirstfree(node);
-	struct pglist_data *pd;
 	unsigned long bootmap_size;
+	pfn_t start_pfn, end_pfn;
+
+	get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
 
 	/*
 	 * Allocate the node data structures on the node first.
 	 */
 	__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 
-	pd = NODE_DATA(node);
-	pd->bdata = &plat_node_bdata[node];
+	NODE_DATA(node)->bdata = &plat_node_bdata[node];
+	NODE_DATA(node)->node_start_pfn = start_pfn;
+	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
 	cpus_clear(hub_data(node)->h_cpus);
 
@@ -461,12 +413,12 @@
 			       sizeof(struct hub_data));
 
   	bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
-					slot_firstpfn, slot_lastpfn);
-	free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
-			(slot_lastpfn - slot_firstpfn) << PAGE_SHIFT);
+					start_pfn, end_pfn);
+	free_bootmem_with_active_regions(node, end_pfn);
 	reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
 		((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size,
 		BOOTMEM_DEFAULT);
+	sparse_memory_present_with_active_regions(node);
 }
 
 /*
@@ -515,16 +467,15 @@
 	pagetable_init();
 
 	for_each_online_node(node) {
-		pfn_t start_pfn = slot_getbasepfn(node, 0);
-		pfn_t end_pfn = node_getmaxclick(node) + 1;
+		pfn_t start_pfn, end_pfn;
 
-		zones_size[ZONE_NORMAL] = end_pfn - start_pfn;
-		free_area_init_node(node, NODE_DATA(node),
-				zones_size, start_pfn, NULL);
+		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
 
 		if (end_pfn > max_low_pfn)
 			max_low_pfn = end_pfn;
 	}
+	zones_size[ZONE_NORMAL] = max_low_pfn;
+	free_area_init_nodes(zones_size);
 }
 
 void __init mem_init(void)
@@ -535,34 +486,10 @@
 	high_memory = (void *) __va(num_physpages << PAGE_SHIFT);
 
 	for_each_online_node(node) {
-		unsigned slot, numslots;
-		struct page *end, *p;
-
 		/*
 		 * This will free up the bootmem, ie, slot 0 memory.
 		 */
 		totalram_pages += free_all_bootmem_node(NODE_DATA(node));
-
-		/*
-		 * We need to manually do the other slots.
-		 */
-		numslots = node_getlastslot(node);
-		for (slot = 1; slot <= numslots; slot++) {
-			p = nid_page_nr(node, slot_getbasepfn(node, slot) -
-					      slot_getbasepfn(node, 0));
-
-			/*
-			 * Free valid memory in current slot.
-			 */
-			for (end = p + slot_getsize(node, slot); p < end; p++) {
-				/* if (!page_is_ram(pgnr)) continue; */
-				/* commented out until page_is_ram works */
-				ClearPageReserved(p);
-				init_page_count(p);
-				__free_page(p);
-				totalram_pages++;
-			}
-		}
 	}
 
 	totalram_pages -= setup_zero_pages();	/* This comes from node 0 */
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index f15fc93..ba5cdeb 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -176,11 +176,14 @@
 static void __cpuinit ip27_init_secondary(void)
 {
 	per_cpu_init();
-	local_irq_enable();
 }
 
 static void __cpuinit ip27_smp_finish(void)
 {
+	extern void hub_rt_clock_event_init(void);
+
+	hub_rt_clock_event_init();
+	local_irq_enable();
 }
 
 static void __init ip27_cpus_done(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 9cebc9e..8b4e854 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -160,10 +160,13 @@
 
 int rt_timer_irq;
 
+static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
+static DEFINE_PER_CPU(char [11], hub_rt_name);
+
 static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
 {
-	struct clock_event_device *cd = dev_id;
 	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
 	int slice = cputoslice(cpu);
 
 	/*
@@ -192,10 +195,7 @@
 #define NSEC_PER_CYCLE		800
 #define CYCLES_PER_SEC		(NSEC_PER_SEC / NSEC_PER_CYCLE)
 
-static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
-static DEFINE_PER_CPU(char [11], hub_rt_name);
-
-static void __cpuinit hub_rt_clock_event_init(void)
+void __cpuinit hub_rt_clock_event_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
@@ -203,17 +203,16 @@
 	int irq = rt_timer_irq;
 
 	sprintf(name, "hub-rt %d", cpu);
-	cd->name		= "HUB-RT",
-	cd->features		= CLOCK_EVT_FEAT_ONESHOT,
+	cd->name		= name;
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
 	clockevent_set_clock(cd, CYCLES_PER_SEC);
 	cd->max_delta_ns        = clockevent_delta2ns(0xfffffffffffff, cd);
 	cd->min_delta_ns        = clockevent_delta2ns(0x300, cd);
-	cd->rating		= 200,
-	cd->irq			= irq,
-	cd->cpumask		= cpumask_of_cpu(cpu),
-	cd->rating		= 300,
-	cd->set_next_event	= rt_next_event,
-	cd->set_mode		= rt_set_mode,
+	cd->rating		= 200;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= rt_next_event;
+	cd->set_mode		= rt_set_mode;
 	clockevents_register_device(cd);
 }
 
@@ -261,6 +260,7 @@
 {
 	hub_rt_clocksource_init();
 	hub_rt_clock_event_global_init();
+	hub_rt_clock_event_init();
 }
 
 void __cpuinit cpu_time_init(void)
@@ -281,7 +281,6 @@
 
 	printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
 
-	hub_rt_clock_event_init();
 	set_c0_status(SRB_TIMOCLK);
 }
 
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index f5e0b2a..d53b84e 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -221,8 +221,8 @@
 image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
-image-$(CONFIG_PPC_MPC86XADS)		+= cuImage.mpc866ads
-image-$(CONFIG_PPC_MPC885ADS)		+= cuImage.mpc885ads
+image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads
+image-$(CONFIG_MPC885ADS)		+= cuImage.mpc885ads
 image-$(CONFIG_PPC_EP88XC)		+= dtbImage.ep88xc
 image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
 					   dtbImage.adder875-redboot
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 08a780d..fa9b6bb 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -251,14 +251,14 @@
 		dma@c300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+			compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
 			cell-index = <1>;
 			reg = <0xc300 0x4>; /* DMA general status register */
 			ranges = <0x0 0xc100 0x200>;
 
 			dma-channel@0 {
 				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,mpc8540-dma-channel";
+					"fsl,eloplus-dma-channel";
 				cell-index = <0>;
 				reg = <0x0 0x80>;
 				interrupt-parent = <&mpic>;
@@ -266,7 +266,7 @@
 			};
 			dma-channel@1 {
 				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,mpc8540-dma-channel";
+					"fsl,eloplus-dma-channel";
 				cell-index = <1>;
 				reg = <0x80 0x80>;
 				interrupt-parent = <&mpic>;
@@ -274,7 +274,7 @@
 			};
 			dma-channel@2 {
 				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,mpc8540-dma-channel";
+					"fsl,eloplus-dma-channel";
 				cell-index = <2>;
 				reg = <0x100 0x80>;
 				interrupt-parent = <&mpic>;
@@ -282,7 +282,7 @@
 			};
 			dma-channel@3 {
 				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,mpc8540-dma-channel";
+					"fsl,eloplus-dma-channel";
 				cell-index = <3>;
 				reg = <0x180 0x80>;
 				interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 09f3062..199e5f5 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue Mar 25 10:25:48 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 27 16:08:06 2008
 #
 CONFIG_PPC64=y
 
@@ -29,6 +29,9 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -87,6 +90,7 @@
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,12 +119,14 @@
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -167,11 +173,11 @@
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_IPIC is not set
@@ -192,6 +198,7 @@
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -226,7 +233,6 @@
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
 CONFIG_IOMMU_HELPER=y
@@ -249,12 +255,14 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_64K_PAGES=y
+CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PPC_SUBPAGE_PROT is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -290,9 +298,12 @@
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_ELECTRA_CF is not set
+CONFIG_ELECTRA_CF=y
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
 
 #
 # Networking
@@ -341,8 +352,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -473,6 +482,7 @@
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,7 +530,6 @@
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -554,7 +563,7 @@
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -632,7 +641,10 @@
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
@@ -642,7 +654,6 @@
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -689,6 +700,7 @@
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -791,7 +803,6 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -810,6 +821,7 @@
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -817,6 +829,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -890,6 +903,7 @@
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -917,7 +931,6 @@
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_PASEMI=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 
@@ -936,13 +949,7 @@
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_ALGOPCA=y
 
 #
 # I2C Hardware Bus support
@@ -971,6 +978,7 @@
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -980,19 +988,13 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -1062,12 +1064,22 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1094,8 +1106,8 @@
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -1213,6 +1225,7 @@
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1292,11 +1305,11 @@
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1334,11 +1347,13 @@
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1354,6 +1369,7 @@
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1375,6 +1391,7 @@
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1416,6 +1433,7 @@
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
 
@@ -1475,10 +1493,6 @@
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1576,12 +1590,10 @@
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1665,9 +1677,10 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1677,6 +1690,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1684,6 +1698,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1694,18 +1709,23 @@
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1735,53 +1755,83 @@
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 5275074..30eedfc 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -189,7 +189,7 @@
 
 	dev->cfg_size = pci_cfg_space_size(dev);
 
-	sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 	dev->class = get_int_prop(node, "class-code", 0);
 	dev->revision = get_int_prop(node, "revision-id", 0);
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 8e24fc1..31729a9 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@
 _end enter_prom memcpy memset reloc_offset __secondary_hold
 __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2"
+reloc_got2 kernstart_addr"
 
 NM="$1"
 OBJ="$2"
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index faeb8f2..da7c058 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -87,6 +87,7 @@
 #ifdef CONFIG_ALTIVEC
 	elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
 #endif
+	unsigned long msr = regs->msr;
 	long err = 0;
 
 	flush_fp_to_thread(current);
@@ -102,7 +103,7 @@
 		/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
 		 * contains valid data.
 		 */
-		regs->msr |= MSR_VEC;
+		msr |= MSR_VEC;
 	}
 	/* We always copy to/from vrsave, it's 0 if we don't have or don't
 	 * use altivec.
@@ -114,6 +115,7 @@
 	err |= __put_user(&sc->gp_regs, &sc->regs);
 	WARN_ON(!FULL_REGS(regs));
 	err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
+	err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
 	err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
 	err |= __put_user(signr, &sc->signal);
 	err |= __put_user(handler, &sc->handler);
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f67e118..51f82d8 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -151,6 +151,7 @@
 	return ret;
 }
 #endif /* CONFIG_MEMORY_HOTREMOVE */
+#endif /* CONFIG_MEMORY_HOTPLUG */
 
 /*
  * walk_memory_resource() needs to make sure there is no holes in a given
@@ -184,8 +185,6 @@
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-#endif /* CONFIG_MEMORY_HOTPLUG */
-
 void show_mem(void)
 {
 	unsigned long total = 0, reserved = 0;
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 80d1bab..e0ff59f 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -402,7 +402,7 @@
 		return;
 	}
 
-	map_page(address, phys, flags);
+	map_page(address, phys, pgprot_val(flags));
 	fixmaps++;
 }
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 48da5df..8a455eb 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -100,7 +100,7 @@
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
-	struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -122,7 +122,7 @@
 mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
 	unsigned long flags;
@@ -150,7 +150,7 @@
 					const struct of_device_id *match)
 {
 	struct mpc52xx_gpiochip *chip;
-	struct mpc52xx_gpio_wkup *regs;
+	struct mpc52xx_gpio_wkup __iomem *regs;
 	struct of_gpio_chip *ofchip;
 	int ret;
 
@@ -260,7 +260,7 @@
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
-	struct mpc52xx_gpio *regs = mm_gc->regs;
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -284,7 +284,7 @@
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpiochip *chip = container_of(mm_gc,
 			struct mpc52xx_gpiochip, mmchip);
-	struct mpc52xx_gpio *regs = mm_gc->regs;
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -312,7 +312,7 @@
 {
 	struct mpc52xx_gpiochip *chip;
 	struct of_gpio_chip *ofchip;
-	struct mpc52xx_gpio *regs;
+	struct mpc52xx_gpio __iomem *regs;
 	int ret;
 
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -387,7 +387,7 @@
 static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct mpc52xx_gpt *regs = mm_gc->regs;
+	struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
 
 	out_be32(&regs->mode, 0x04);
 
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 31da84c..0e04f8f 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -217,7 +217,7 @@
 static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
 {									\
 	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
-	u##size *dst = b;						\
+	__le##size *dst = b;						\
 	for (; c != 0; c--, dst++)					\
 		*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
 	scc_pciex_io_flush(bus);					\
@@ -231,10 +231,11 @@
 				 unsigned long c)			\
 {									\
 	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
-	const u##size *src = b;						\
+	const __le##size *src = b;					\
 	for (; c != 0; c--, src++)					\
 		__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
 }
+#define __le8 u8
 #define cpu_to_le8(x) (x)
 #define le8_to_cpu(x) (x)
 PCIEX_PIO_FUNC(8, b)
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 5b3fb2b..3a58ffa 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -317,6 +317,9 @@
 		return result;
 	}
 
+	lmb_add(start_addr, map.r1.size);
+	lmb_analyze();
+
 	result = online_pages(start_pfn, nr_pages);
 
 	if (result)
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3a7054e..019657c11 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -432,7 +432,7 @@
 	{"dallas,ds1339",  "ds1339"},
 	{"dallas,ds1340",  "ds1340"},
 	{"stm,m41t00",     "m41t00"},
-	{"dallas,ds1374",  "rtc-ds1374"},
+	{"dallas,ds1374",  "ds1374"},
 };
 
 static int __init of_find_i2c_driver(struct device_node *node,
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8619f2a..7680001 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1331,6 +1331,9 @@
 	unsigned long flags;
 	u32 reg;
 
+	if (!mpic)
+		return;
+
 	spin_lock_irqsave(&mpic_lock, flags);
 	if (is_ipi) {
 		reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
@@ -1346,23 +1349,6 @@
 	spin_unlock_irqrestore(&mpic_lock, flags);
 }
 
-unsigned int mpic_irq_get_priority(unsigned int irq)
-{
-	unsigned int is_ipi;
-	struct mpic *mpic = mpic_find(irq, &is_ipi);
-	unsigned int src = mpic_irq_to_hw(irq);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&mpic_lock, flags);
-	if (is_ipi)
-		reg = mpic_ipi_read(src = mpic->ipi_vecs[0]);
-	else
-		reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
-	spin_unlock_irqrestore(&mpic_lock, flags);
-	return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
-}
-
 void mpic_setup_this_cpu(void)
 {
 #ifdef CONFIG_SMP
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 602c268..5d529bc 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -60,8 +60,10 @@
 long long __ashldi3(long long, int);
 long long __lshrdi3(long long, int);
 
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(transfer_to_handler);
 EXPORT_SYMBOL(do_IRQ);
 EXPORT_SYMBOL(machine_check_exception);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1d03508..93acb3c 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -308,6 +308,9 @@
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
 
+config ARCH_SELECT_MEMORY_MODEL
+       def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 655d525..ad40729 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -130,6 +130,7 @@
 
 	P_DEBUG("  -= Work Queue =-\n");
 	i = 0;
+	get_online_cpus();
 	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		ops = list_entry(lh, struct appldata_ops, list);
@@ -140,6 +141,7 @@
 		}
 	}
 	spin_unlock(&appldata_ops_lock);
+	put_online_cpus();
 }
 
 /*
@@ -266,12 +268,14 @@
 	len = *lenp;
 	if (copy_from_user(buf, buffer, len > sizeof(buf) ? sizeof(buf) : len))
 		return -EFAULT;
+	get_online_cpus();
 	spin_lock(&appldata_timer_lock);
 	if (buf[0] == '1')
 		__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
 	else if (buf[0] == '0')
 		__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
 	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
 out:
 	*lenp = len;
 	*ppos += len;
@@ -314,10 +318,12 @@
 		return -EINVAL;
 	}
 
+	get_online_cpus();
 	spin_lock(&appldata_timer_lock);
 	appldata_interval = interval;
 	__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
 	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
 
 	P_INFO("Monitoring CPU interval set to %u milliseconds.\n",
 		 interval);
@@ -556,8 +562,10 @@
 		return -ENOMEM;
 	}
 
+	get_online_cpus();
 	for_each_online_cpu(i)
 		appldata_online_cpu(i);
+	put_online_cpus();
 
 	/* Register cpu hotplug notifier */
 	register_hotcpu_notifier(&appldata_nb);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index aa341d0e..c5cdb97 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Wed Apr 30 11:07:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Fri May 30 09:49:33 2008
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -103,6 +103,7 @@
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -173,6 +174,7 @@
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -210,6 +212,7 @@
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
+# CONFIG_PAGE_STATES is not set
 CONFIG_VIRT_TIMER=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 # CONFIG_APPLDATA_BASE is not set
@@ -620,6 +623,7 @@
 #
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+CONFIG_ACCESSIBILITY=y
 
 #
 # File systems
@@ -754,11 +758,12 @@
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_CHECK=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index c14a336..d2f270c 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -208,7 +208,7 @@
 	[INSTR_RRF_F0FF]  = { 0xff, F_16,F_24,F_28,0,0,0 },    /* e.g. madbr */
 	[INSTR_RRF_FUFF]  = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */
 	[INSTR_RRF_RURR]  = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */
-	[INSTR_RRF_R0RR]  = { 0xff, R_24,R_28,R_16,0,0,0 },    /* e.g. idte  */
+	[INSTR_RRF_R0RR]  = { 0xff, R_24,R_16,R_28,0,0,0 },    /* e.g. idte  */
 	[INSTR_RRF_U0FF]  = { 0xff, F_24,U4_16,F_28,0,0,0 },   /* e.g. fixr  */
 	[INSTR_RRF_U0RF]  = { 0xff, R_24,U4_16,F_28,0,0,0 },   /* e.g. cfebr */
 	[INSTR_RRF_M0RR]  = { 0xff, R_24,R_28,M_16,0,0,0 },    /* e.g. sske  */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 1f42289..42b1d12 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1089,7 +1089,7 @@
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-int smp_rescan_cpus(void)
+int __ref smp_rescan_cpus(void)
 {
 	cpumask_t newcpus;
 	int cpu;
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 29f3a63..0559864 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -44,37 +44,34 @@
 
 void show_mem(void)
 {
-	int i, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
+	unsigned long i, total = 0, reserved = 0;
+	unsigned long shared = 0, cached = 0;
+	unsigned long flags;
 	struct page *page;
+	pg_data_t *pgdat;
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		if (!pfn_valid(i))
-			continue;
-		page = pfn_to_page(i);
-		total++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
+	for_each_online_pgdat(pgdat) {
+		pgdat_resize_lock(pgdat, &flags);
+		for (i = 0; i < pgdat->node_spanned_pages; i++) {
+			if (!pfn_valid(pgdat->node_start_pfn + i))
+				continue;
+			page = pfn_to_page(pgdat->node_start_pfn + i);
+			total++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (page_count(page))
+				shared += page_count(page) - 1;
+		}
+		pgdat_resize_unlock(pgdat, &flags);
 	}
-	printk("%d pages of RAM\n", total);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-
-	printk("%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-	printk("%lu pages writeback\n", global_page_state(NR_WRITEBACK));
-	printk("%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-	printk("%lu pages slab\n",
-	       global_page_state(NR_SLAB_RECLAIMABLE) +
-	       global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk("%lu pages pagetables\n", global_page_state(NR_PAGETABLE));
+	printk("%ld pages of RAM\n", total);
+	printk("%ld reserved pages\n", reserved);
+	printk("%ld pages shared\n", shared);
+	printk("%ld pages swap cached\n", cached);
 }
 
 /*
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index ea28048..f591188 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -27,12 +27,19 @@
 
 static LIST_HEAD(mem_segs);
 
-static pud_t *vmem_pud_alloc(void)
+static void __ref *vmem_alloc_pages(unsigned int order)
+{
+	if (slab_is_available())
+		return (void *)__get_free_pages(GFP_KERNEL, order);
+	return alloc_bootmem_pages((1 << order) * PAGE_SIZE);
+}
+
+static inline pud_t *vmem_pud_alloc(void)
 {
 	pud_t *pud = NULL;
 
 #ifdef CONFIG_64BIT
-	pud = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
+	pud = vmem_alloc_pages(2);
 	if (!pud)
 		return NULL;
 	clear_table((unsigned long *) pud, _REGION3_ENTRY_EMPTY, PAGE_SIZE * 4);
@@ -40,12 +47,12 @@
 	return pud;
 }
 
-static pmd_t *vmem_pmd_alloc(void)
+static inline pmd_t *vmem_pmd_alloc(void)
 {
 	pmd_t *pmd = NULL;
 
 #ifdef CONFIG_64BIT
-	pmd = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
+	pmd = vmem_alloc_pages(2);
 	if (!pmd)
 		return NULL;
 	clear_table((unsigned long *) pmd, _SEGMENT_ENTRY_EMPTY, PAGE_SIZE * 4);
@@ -207,13 +214,14 @@
 		if (pte_none(*pt_dir)) {
 			unsigned long new_page;
 
-			new_page =__pa(vmemmap_alloc_block(PAGE_SIZE, 0));
+			new_page =__pa(vmem_alloc_pages(0));
 			if (!new_page)
 				goto out;
 			pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL);
 			*pt_dir = pte;
 		}
 	}
+	memset(start, 0, nr * sizeof(struct page));
 	ret = 0;
 out:
 	flush_tlb_kernel_range(start_addr, end_addr);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8a68160..9a854c8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -281,7 +281,6 @@
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
-	select SYS_SUPPORTS_NUMA
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
 
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0d2ef1e..0f45498 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -81,7 +81,7 @@
 
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && (MMU || BROKEN)
 	help
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 8050b03..fb7b1b1 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -41,6 +41,8 @@
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 
+cflags-y	+= $(call cc-option,-mno-fdpic)
+
 #
 # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
 # support it, while -Wa,-dsp by itself limits the range of usable opcodes
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 452d0d6..2308e87 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
 #include <linux/pm.h>
@@ -109,27 +108,6 @@
 	.resource	= heartbeat_resources,
 };
 
-static struct plat_serial8250_port uart_platform_data[] = {
-	{
-		.membase	= (void __iomem *)0xb3e30000,
-		.mapbase	= 0xb3e30000,
-		.iotype		= UPIO_MEM,
-		.irq		= IRQ_VOYAGER,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
-		.regshift	= 2,
-		.uartclk	= (9600 * 16),
-	},
-	{ 0 },
-};
-
-static struct platform_device uart_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data	= uart_platform_data,
-	},
-};
-
 static struct resource sm501_resources[] = {
 	[0]	= {
 		.start	= 0x10000000,
@@ -185,11 +163,7 @@
 };
 
 static struct sm501_initdata sm501_initdata = {
-	.gpio_high	= {
-		.set	= 0x00001fe0,
-		.mask	= 0x0,
-	},
-	.devices	= SM501_USE_USB_HOST,
+	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0,
 };
 
 static struct sm501_platdata sm501_platform_data = {
@@ -208,7 +182,6 @@
 };
 
 static struct platform_device *rts7751r2d_devices[] __initdata = {
-	&uart_device,
 	&sm501_device,
 	&heartbeat_device,
 	&spi_sh_sci_device,
@@ -272,16 +245,6 @@
 
 	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
 	writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-
-	/*
-	 * Power Mode Gate - Enable UART0
-	 */
-
-	sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE;
-	writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
-
-	sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE;
-	writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
 }
 
 /*
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index ee59008..287408b 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Wed Feb  6 21:52:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Thu May 22 14:30:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,18 +37,16 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -61,11 +60,13 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -77,11 +78,15 @@
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -105,7 +110,6 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -118,6 +122,7 @@
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -135,6 +140,7 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -142,6 +148,7 @@
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -255,7 +262,6 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -323,8 +329,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -376,7 +380,90 @@
 CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -385,11 +472,13 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -461,6 +550,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -482,13 +572,20 @@
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -508,6 +605,7 @@
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -531,16 +629,40 @@
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
 
 #
-# SPI support
+# I2C Hardware Bus support
 #
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SH_MOBILE=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -553,12 +675,22 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -592,6 +724,8 @@
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -608,6 +742,7 @@
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -623,7 +758,9 @@
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -640,15 +777,31 @@
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -657,10 +810,6 @@
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -673,13 +822,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -720,10 +866,13 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
@@ -743,6 +892,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -763,48 +913,77 @@
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 
@@ -812,6 +991,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
new file mode 100644
index 0000000..a0ebd43
--- /dev/null
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -0,0 +1,841 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun  3 13:02:42 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_MD=0
+# CONFIG_TICK_ONESHOT is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_BOOTMEM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 0d0cda90..6b34baa 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Sep 13 16:40:16 2007
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun  3 20:27:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +19,7 @@
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -25,47 +27,82 @@
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 
@@ -81,6 +118,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_CLASSIC_RCU is not set
 
 #
 # System type
@@ -88,7 +126,10 @@
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 CONFIG_CPU_SUBTYPE_SH7206=y
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -97,6 +138,7 @@
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -105,14 +147,17 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -121,23 +166,25 @@
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -183,13 +230,16 @@
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -213,11 +263,15 @@
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_KEXEC is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -225,25 +279,25 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
 
 #
 # Networking
@@ -253,14 +307,24 @@
 #
 # Networking options
 #
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -273,14 +337,13 @@
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -297,10 +360,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -308,6 +367,7 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -329,8 +389,10 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -339,11 +401,9 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -356,6 +416,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -390,7 +451,6 @@
 CONFIG_MTD_PHYSMAP_START=0x20000000
 CONFIG_MTD_PHYSMAP_LEN=0x01000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -418,13 +478,19 @@
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -443,23 +509,30 @@
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -469,28 +542,7 @@
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -502,6 +554,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,106 +573,119 @@
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_SH=y
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -642,10 +708,11 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -658,18 +725,28 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -681,30 +758,20 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -712,7 +779,10 @@
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -722,38 +792,123 @@
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index de45c6a..79baa47 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -242,6 +242,7 @@
 				reg += 8;
 			}
 		}
+	}
 #endif
 
 	/*
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index ebceb0d..be49269 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -132,6 +132,7 @@
 
 		switch (prr) {
 		case 0x50:
+		case 0x51:
 			boot_cpu_data.type = CPU_SH7723;
 			boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
 			break;
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 0693140..62ebccf 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -16,7 +16,7 @@
 
 static struct resource usbf_resources[] = {
 	[0] = {
-		.name	= "USBF",
+		.name	= "m66592_udc",
 		.start	= 0x04480000,
 		.end	= 0x044800FF,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 16925cf..a0470f2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -16,6 +16,21 @@
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
+		.mapbase        = 0xffe00000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 80, 80, 80, 80 },
+	},{
+		.mapbase        = 0xffe10000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 81, 81, 81, 81 },
+	},{
+		.mapbase        = 0xffe20000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 82, 82, 82, 82 },
+	},{
 		.mapbase	= 0xa4e30000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCI,
@@ -73,9 +88,35 @@
 	.resource	= rtc_resources,
 };
 
+static struct resource sh7723_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7723_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sh7723_usb_host_resources),
+	.resource	= sh7723_usb_host_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
 	&sci_device,
 	&rtc_device,
+	&sh7723_usb_host_device,
 };
 
 static int __init sh7723_devices_setup(void)
@@ -153,7 +194,7 @@
 	INTC_VECT(VIO_VOUI,0x8E0),
 
 	INTC_VECT(SCIFA_SCIFA0,0x900),
-	INTC_VECT(VPU_VPUI,0x920),
+	INTC_VECT(VPU_VPUI,0x980),
 	INTC_VECT(TPU_TPUI,0x9A0),
 	INTC_VECT(ADC_ADI,0x9E0),
 	INTC_VECT(USB_USI0,0xA20),
@@ -292,9 +333,3 @@
 {
 	register_intc_controller(&intc_desc);
 }
-
-void __init plat_mem_setup(void)
-{
-	/* Register the URAM space as Node 1 */
-	setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index ae2b222..f189a55 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -291,8 +291,9 @@
 };
 
 static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-			 NULL, NULL, irq_mask_registers, irq_prio_registers,
-			 irq_sense_registers);
+			NULL, irq_mask_registers, irq_prio_registers,
+			irq_sense_registers);
+
 
 /* External interrupt pins in IRL mode */
 static struct intc_vect irl_vectors[] __initdata = {
@@ -324,10 +325,10 @@
 };
 
 static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
-			 NULL, NULL, irl7654_mask_registers, NULL, NULL);
+			NULL, irl7654_mask_registers, NULL, NULL);
 
 static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
-			 NULL, NULL, irl3210_mask_registers, NULL, NULL);
+			NULL, irl3210_mask_registers, NULL, NULL);
 
 #define INTC_ICR0	0xffd00000
 #define INTC_INTMSK0	0xffd00044
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index b3d0a03..5482e65 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -30,6 +30,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <asm/unaligned.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -56,34 +57,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_SUPERH32
-#define COPY_UNALIGNED_WORD(sw, tw, align) \
-{ \
-	void *__s = &(sw), *__t = &(tw); \
-	unsigned short *__s2 = __s, *__t2 = __t; \
-	unsigned char *__s1 = __s, *__t1 = __t; \
-	switch ((align)) \
-	{ \
-	case 0: \
-		*(unsigned long *) __t = *(unsigned long *) __s; \
-		break; \
-	case 2: \
-		*__t2++ = *__s2++; \
-		*__t2 = *__s2; \
-		break; \
-	default: \
-		*__t1++ = *__s1++; \
-		*__t1++ = *__s1++; \
-		*__t1++ = *__s1++; \
-		*__t1 = *__s1; \
-		break; \
-	} \
-}
-#else
-/* One thing SHmedia doesn't screw up! */
-#define COPY_UNALIGNED_WORD(sw, tw, align)	{ (tw) = (sw); }
-#endif
-
 int apply_relocate_add(Elf32_Shdr *sechdrs,
 		   const char *strtab,
 		   unsigned int symindex,
@@ -96,7 +69,6 @@
 	Elf32_Addr relocation;
 	uint32_t *location;
 	uint32_t value;
-	int align;
 
 	pr_debug("Applying relocate section %u to %u\n", relsec,
 		 sechdrs[relsec].sh_info);
@@ -109,7 +81,6 @@
 		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
 			+ ELF32_R_SYM(rel[i].r_info);
 		relocation = sym->st_value + rel[i].r_addend;
-		align = (int)location & 3;
 
 #ifdef CONFIG_SUPERH64
 		/* For text addresses, bit2 of the st_other field indicates
@@ -122,15 +93,15 @@
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 		case R_SH_DIR32:
-			COPY_UNALIGNED_WORD (*location, value, align);
+			value = get_unaligned(location);
 			value += relocation;
-			COPY_UNALIGNED_WORD (value, *location, align);
+			put_unaligned(value, location);
 			break;
 		case R_SH_REL32:
 			relocation = (relocation - (Elf32_Addr) location);
-			COPY_UNALIGNED_WORD (*location, value, align);
+			value = get_unaligned(location);
 			value += relocation;
-			COPY_UNALIGNED_WORD (value, *location, align);
+			put_unaligned(value, location);
 			break;
 		case R_SH_IMM_LOW16:
 			*location = (*location & ~0x3fffc00) |
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 59e9344..adaaed4 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -2,6 +2,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/string.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
@@ -45,21 +46,22 @@
 	add_timer(&led_blink_timer);
 }
 
-static int led_read_proc(char *buf, char **start, off_t offset, int count,
-			 int *eof, void *data)
+static int led_proc_show(struct seq_file *m, void *v)
 {
-	int len = 0;
-
 	if (get_auxio() & AUXIO_LED)
-		len = sprintf(buf, "on\n");
+		seq_puts(m, "on\n");
 	else
-		len = sprintf(buf, "off\n");
-
-	return len;
+		seq_puts(m, "off\n");
+	return 0;
 }
 
-static int led_write_proc(struct file *file, const char __user *buffer,
-			  unsigned long count, void *data)
+static int led_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, led_proc_show, NULL);
+}
+
+static ssize_t led_proc_write(struct file *file, const char __user *buffer,
+			      size_t count, loff_t *ppos)
 {
 	char *buf = NULL;
 
@@ -103,6 +105,15 @@
 	return count;
 }
 
+static const struct file_operations led_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= led_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= led_proc_write,
+};
+
 static struct proc_dir_entry *led;
 
 #define LED_VERSION	"0.1"
@@ -112,12 +123,9 @@
 	init_timer(&led_blink_timer);
 	led_blink_timer.function = led_blink;
 
-	led = create_proc_entry("led", 0, NULL);
+	led = proc_create("led", 0, NULL, &led_proc_fops);
 	if (!led)
 		return -ENOMEM;
-
-	led->read_proc = led_read_proc; /* reader function */
-	led->write_proc = led_write_proc; /* writer function */
 	led->owner = THIS_MODULE;
 
 	printk(KERN_INFO
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 0a0c05f..2084f81 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -657,20 +657,39 @@
 		struct task_struct *p, struct pt_regs *regs)
 {
 	struct thread_info *t = task_thread_info(p);
+	struct sparc_stackf *parent_sf;
+	unsigned long child_stack_sz;
 	char *child_trap_frame;
+	int kernel_thread;
+
+	kernel_thread = (regs->tstate & TSTATE_PRIV) ? 1 : 0;
+	parent_sf = ((struct sparc_stackf *) regs) - 1;
 
 	/* Calculate offset to stack_frame & pt_regs */
-	child_trap_frame = task_stack_page(p) + (THREAD_SIZE - (TRACEREG_SZ+STACKFRAME_SZ));
-	memcpy(child_trap_frame, (((struct sparc_stackf *)regs)-1), (TRACEREG_SZ+STACKFRAME_SZ));
+	child_stack_sz = ((STACKFRAME_SZ + TRACEREG_SZ) +
+			  (kernel_thread ? STACKFRAME_SZ : 0));
+	child_trap_frame = (task_stack_page(p) +
+			    (THREAD_SIZE - child_stack_sz));
+	memcpy(child_trap_frame, parent_sf, child_stack_sz);
 
-	t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) | (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
+	t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) |
+				 (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
 		(((regs->tstate + 1) & TSTATE_CWP) << TI_FLAG_CWP_SHIFT);
 	t->new_child = 1;
 	t->ksp = ((unsigned long) child_trap_frame) - STACK_BIAS;
-	t->kregs = (struct pt_regs *)(child_trap_frame+sizeof(struct sparc_stackf));
+	t->kregs = (struct pt_regs *) (child_trap_frame +
+				       sizeof(struct sparc_stackf));
 	t->fpsaved[0] = 0;
 
-	if (regs->tstate & TSTATE_PRIV) {
+	if (kernel_thread) {
+		struct sparc_stackf *child_sf = (struct sparc_stackf *)
+			(child_trap_frame + (STACKFRAME_SZ + TRACEREG_SZ));
+
+		/* Zero terminate the stack backtrace.  */
+		child_sf->fp = NULL;
+		t->kregs->u_regs[UREG_FP] =
+		  ((unsigned long) child_sf) - STACK_BIAS;
+
 		/* Special case, if we are spawning a kernel thread from
 		 * a userspace task (via KMOD, NFS, or similar) we must
 		 * disable performance counters in the child because the
@@ -681,12 +700,7 @@
 			t->pcr_reg = 0;
 			t->flags &= ~_TIF_PERFCTR;
 		}
-		t->kregs->u_regs[UREG_FP] = t->ksp;
 		t->flags |= ((long)ASI_P << TI_FLAG_CURRENT_DS_SHIFT);
-		flush_register_windows();
-		memcpy((void *)(t->ksp + STACK_BIAS),
-		       (void *)(regs->u_regs[UREG_FP] + STACK_BIAS),
-		       sizeof(struct sparc_stackf));
 		t->kregs->u_regs[UREG_G6] = (unsigned long) t;
 		t->kregs->u_regs[UREG_G4] = (unsigned long) t->task;
 	} else {
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index 3afacbb..c6fc695 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -363,6 +363,7 @@
 		brz,pn			%g1, kern_rtt_fill
 		 nop
 kern_rtt_restore:
+		stw			%g0, [%sp + PTREGS_OFF + PT_V9_MAGIC]
 		restore
 		retry
 
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 01b52f5..c73ce3f 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -19,7 +19,7 @@
 	fp = ksp + STACK_BIAS;
 	thread_base = (unsigned long) tp;
 	do {
-		struct reg_window *rw;
+		struct sparc_stackf *sf;
 		struct pt_regs *regs;
 		unsigned long pc;
 
@@ -28,15 +28,17 @@
 		    fp >= (thread_base + THREAD_SIZE))
 			break;
 
-		rw = (struct reg_window *) fp;
-		regs = (struct pt_regs *) (rw + 1);
+		sf = (struct sparc_stackf *) fp;
+		regs = (struct pt_regs *) (sf + 1);
 
 		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+			if (!(regs->tstate & TSTATE_PRIV))
+				break;
 			pc = regs->tpc;
 			fp = regs->u_regs[UREG_I6] + STACK_BIAS;
 		} else {
-			pc = rw->ins[7];
-			fp = rw->ins[6] + STACK_BIAS;
+			pc = sf->callers_pc;
+			fp = (unsigned long)sf->fp + STACK_BIAS;
 		}
 
 		if (trace->skip > 0)
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index d9b8d46..3697492 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -2116,7 +2116,7 @@
 	printk("\n");
 #endif
 	do {
-		struct reg_window *rw;
+		struct sparc_stackf *sf;
 		struct pt_regs *regs;
 		unsigned long pc;
 
@@ -2124,15 +2124,17 @@
 		if (fp < (thread_base + sizeof(struct thread_info)) ||
 		    fp >= (thread_base + THREAD_SIZE))
 			break;
-		rw = (struct reg_window *)fp;
-		regs = (struct pt_regs *) (rw + 1);
+		sf = (struct sparc_stackf *) fp;
+		regs = (struct pt_regs *) (sf + 1);
 
 		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+			if (!(regs->tstate & TSTATE_PRIV))
+				break;
 			pc = regs->tpc;
 			fp = regs->u_regs[UREG_I6] + STACK_BIAS;
 		} else {
-			pc = rw->ins[7];
-			fp = rw->ins[6] + STACK_BIAS;
+			pc = sf->callers_pc;
+			fp = (unsigned long)sf->fp + STACK_BIAS;
 		}
 
 		printk(" [%016lx] ", pc);
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 44ad160..b58fb89 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -49,7 +49,6 @@
 #include "irq_user.h"
 #include "irq_kern.h"
 #include "ubd_user.h"
-#include "kern_util.h"
 #include "os.h"
 #include "mem.h"
 #include "mem_kern.h"
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index e2716ac..db5be46 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -299,6 +299,6 @@
 extern int get_pty(void);
 
 /* sys-$ARCH/task_size.c */
-extern unsigned long os_get_task_size(void);
+extern unsigned long os_get_top_address(void);
 
 #endif
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 9db85b2..8d84250 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -274,7 +274,7 @@
 	if (have_root == 0)
 		add_arg(DEFAULT_COMMAND_LINE);
 
-	host_task_size = os_get_task_size();
+	host_task_size = os_get_top_address();
 	/*
 	 * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
 	 * out
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index 74ca7aa..30860b8 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -7,6 +7,7 @@
 #include <unistd.h>
 #include <errno.h>
 #include <sched.h>
+#include <linux/limits.h>
 #include <sys/socket.h>
 #include <sys/wait.h>
 #include "kern_constants.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 6be028c..172ad8f 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -55,7 +55,7 @@
  * Signals that are OK to receive in the stub - we'll just continue it.
  * SIGWINCH will happen when UML is inside a detached screen.
  */
-#define STUB_SIG_MASK (1 << SIGVTALRM)
+#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
 
 /* Signals that the stub will finish with - anything else is an error */
 #define STUB_DONE_MASK (1 << SIGTRAP)
diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c
index ccb49b0..be04c1e 100644
--- a/arch/um/os-Linux/sys-i386/task_size.c
+++ b/arch/um/os-Linux/sys-i386/task_size.c
@@ -63,7 +63,7 @@
 	return ok;
 }
 
-unsigned long os_get_task_size(void)
+unsigned long os_get_top_address(void)
 {
 	struct sigaction sa, old;
 	unsigned long bottom = 0;
@@ -76,9 +76,9 @@
 	 * hosts, but shouldn't hurt otherwise.
 	 */
 	unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
-	unsigned long test;
+	unsigned long test, original;
 
-	printf("Locating the top of the address space ... ");
+	printf("Locating the bottom of the address space ... ");
 	fflush(stdout);
 
 	/*
@@ -89,16 +89,31 @@
 	sigemptyset(&sa.sa_mask);
 	sa.sa_flags = SA_NODEFER;
 	if (sigaction(SIGSEGV, &sa, &old)) {
-		perror("os_get_task_size");
+		perror("os_get_top_address");
 		exit(1);
 	}
 
-	if (!page_ok(bottom)) {
-		fprintf(stderr, "Address 0x%x no good?\n",
-			bottom << UM_KERN_PAGE_SHIFT);
+	/* Manually scan the address space, bottom-up, until we find
+	 * the first valid page (or run out of them).
+	 */
+	for (bottom = 0; bottom < top; bottom++) {
+		if (page_ok(bottom))
+			break;
+	}
+
+	/* If we've got this far, we ran out of pages. */
+	if (bottom == top) {
+		fprintf(stderr, "Unable to determine bottom of address "
+			"space.\n");
 		exit(1);
 	}
 
+	printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
+	printf("Locating the top of the address space ... ");
+	fflush(stdout);
+
+	original = bottom;
+
 	/* This could happen with a 4G/4G split */
 	if (page_ok(top))
 		goto out;
@@ -114,7 +129,7 @@
 out:
 	/* Restore the old SIGSEGV handling */
 	if (sigaction(SIGSEGV, &old, NULL)) {
-		perror("os_get_task_size");
+		perror("os_get_top_address");
 		exit(1);
 	}
 	top <<= UM_KERN_PAGE_SHIFT;
diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c
index fad6f57..26a0dd1 100644
--- a/arch/um/os-Linux/sys-x86_64/task_size.c
+++ b/arch/um/os-Linux/sys-x86_64/task_size.c
@@ -1,4 +1,4 @@
-unsigned long os_get_task_size(unsigned long shift)
+unsigned long os_get_top_address(unsigned long shift)
 {
 	/* The old value of CONFIG_TOP_ADDR */
 	return 0x7fc0000000;
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index bee98f4..dec5678 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -106,6 +106,10 @@
 	unsigned long long this_tick = os_nsecs();
 	int one_tick = UM_NSEC_PER_SEC / UM_HZ;
 
+	/* Protection against the host's time going backwards */
+	if ((last_tick != 0) && (this_tick < last_tick))
+		this_tick = last_tick;
+
 	if (last_tick == 0)
 		last_tick = this_tick - one_tick;
 
@@ -148,6 +152,9 @@
 		start_usecs = usec;
 
 	start_usecs -= skew / UM_NSEC_PER_USEC;
+	if (start_usecs < 0)
+		start_usecs = 0;
+
 	tv = ((struct timeval) { .tv_sec  = start_usecs / UM_USEC_PER_SEC,
 				 .tv_usec = start_usecs % UM_USEC_PER_SEC });
 	interval = ((struct itimerval) { { 0, usec }, tv });
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index 6604673..1db2fce 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -3,5 +3,9 @@
 #include <asm/checksum.h>
 
 /*XXX: we need them because they would be exported by x86_64 */
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+EXPORT_SYMBOL(memcpy);
+#else
 EXPORT_SYMBOL(__memcpy);
+#endif
 EXPORT_SYMBOL(csum_partial);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fe361ae..52e18e6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,17 +26,10 @@
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
 
-config DEFCONFIG_LIST
+config ARCH_DEFCONFIG
 	string
-	depends on X86_32
-	option defconfig_list
-	default "arch/x86/configs/i386_defconfig"
-
-config DEFCONFIG_LIST
-	string
-	depends on X86_64
-	option defconfig_list
-	default "arch/x86/configs/x86_64_defconfig"
+	default "arch/x86/configs/i386_defconfig" if X86_32
+	default "arch/x86/configs/x86_64_defconfig" if X86_64
 
 
 config GENERIC_LOCKBREAK
@@ -1515,13 +1508,13 @@
 config PCI_GODIRECT
 	bool "Direct"
 
-config PCI_GOANY
-	bool "Any"
-
 config PCI_GOOLPC
 	bool "OLPC"
 	depends on OLPC
 
+config PCI_GOANY
+	bool "Any"
+
 endchoice
 
 config PCI_BIOS
@@ -1538,9 +1531,8 @@
 	depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
 
 config PCI_OLPC
-	bool
-	depends on PCI && PCI_GOOLPC
-	default y
+	def_bool y
+	depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
 
 config PCI_DOMAINS
 	def_bool y
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ac1e31b..1836337 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -6,15 +6,19 @@
 source "lib/Kconfig.debug"
 
 config NONPROMISC_DEVMEM
-	bool "Disable promiscuous /dev/mem"
+	bool "Filter access to /dev/mem"
 	help
-	  The /dev/mem file by default only allows userspace access to PCI
-	  space and the BIOS code and data regions. This is sufficient for
-	  dosemu and X and all common users of /dev/mem. With this config
-	  option, you allow userspace access to all of memory, including
-	  kernel and userspace memory. Accidental access to this is
-	  obviously disasterous, but specific access can be used by people
-	  debugging the kernel.
+	  If this option is left off, you allow userspace access to all
+	  of memory, including kernel and userspace memory. Accidental
+	  access to this is obviously disastrous, but specific access can
+	  be used by people debugging the kernel.
+
+	  If this option is switched on, the /dev/mem file only allows
+	  userspace access to PCI space and the BIOS code and data regions.
+	  This is sufficient for dosemu and X and all common users of
+	  /dev/mem.
+
+	  If in doubt, say Y.
 
 config EARLY_PRINTK
 	bool "Early printk" if EMBEDDED
diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c
index c1d00c02..50e47cd 100644
--- a/arch/x86/boot/printf.c
+++ b/arch/x86/boot/printf.c
@@ -56,7 +56,7 @@
 	if (type & LEFT)
 		type &= ~ZEROPAD;
 	if (base < 2 || base > 36)
-		return 0;
+		return NULL;
 	c = (type & ZEROPAD) ? '0' : ' ';
 	sign = 0;
 	if (type & SIGN) {
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c49ebcc..33c5216 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -242,12 +242,19 @@
 
 static void __cpuinit acpi_register_lapic(int id, u8 enabled)
 {
+	unsigned int ver = 0;
+
 	if (!enabled) {
 		++disabled_cpus;
 		return;
 	}
 
-	generic_processor_info(id, 0);
+#ifdef CONFIG_X86_32
+	if (boot_cpu_physical_apicid != -1U)
+		ver = apic_version[boot_cpu_physical_apicid];
+#endif
+
+	generic_processor_info(id, ver);
 }
 
 static int __init
@@ -767,8 +774,13 @@
 	mp_lapic_addr = address;
 
 	set_fixmap_nocache(FIX_APIC_BASE, address);
-	if (boot_cpu_physical_apicid == -1U)
+	if (boot_cpu_physical_apicid == -1U) {
 		boot_cpu_physical_apicid  = GET_APIC_ID(read_apic_id());
+#ifdef CONFIG_X86_32
+		apic_version[boot_cpu_physical_apicid] =
+			 GET_APIC_VERSION(apic_read(APIC_LVR));
+#endif
+	}
 }
 
 static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 5910020..0633cfd 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -534,7 +534,7 @@
  */
 void clear_local_APIC(void)
 {
-	int maxlvt = lapic_get_maxlvt();
+	int maxlvt;
 	u32 v;
 
 	/* APIC hasn't been mapped yet */
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index af4a867..777a7ff 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -245,7 +245,7 @@
 	if ((ecx > 95) || (ecx == 0) || (eax < ebx))
 		return -EIO;
 
-	edx = (eax - ebx) / (100 - ecx);
+	edx = ((eax - ebx) * 100) / (100 - ecx);
 	*low_freq = edx * 1000; /* back to kHz */
 
 	dprintk("low frequency is %u kHz\n", *low_freq);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 46d4034..206791e 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1127,12 +1127,23 @@
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
-			printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
+#ifndef CONFIG_ACPI_PROCESSOR
+			printk(KERN_ERR PFX "ACPI Processor support is required "
+			       "for SMP systems but is absent. Please load the "
+			       "ACPI Processor module before starting this "
+			       "driver.\n");
+#else
+			printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
+			       "_PSS objects in a way that Linux understands. "
+			       "Please report this to the Linux ACPI maintainers"
+			       " and complain to your BIOS vendor.\n");
+#endif
 			kfree(data);
 			return -ENODEV;
 		}
 		if (pol->cpu != 0) {
-			printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n");
+			printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
+			       "CPU0. Complain to your BIOS vendor.\n");
 			kfree(data);
 			return -ENODEV;
 		}
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index e03cc95..eb9ddd8 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -56,6 +56,11 @@
 
 void __init init_thread_xstate(void)
 {
+	if (!HAVE_HWFP) {
+		xstate_size = sizeof(struct i387_soft_struct);
+		return;
+	}
+
 	if (cpu_has_fxsr)
 		xstate_size = sizeof(struct i387_fxsave_struct);
 #ifdef CONFIG_X86_32
@@ -94,7 +99,7 @@
 int init_fpu(struct task_struct *tsk)
 {
 	if (tsk_used_math(tsk)) {
-		if (tsk == current)
+		if (HAVE_HWFP && tsk == current)
 			unlazy_fpu(tsk);
 		return 0;
 	}
@@ -109,6 +114,15 @@
 			return -ENOMEM;
 	}
 
+#ifdef CONFIG_X86_32
+	if (!HAVE_HWFP) {
+		memset(tsk->thread.xstate, 0, xstate_size);
+		finit();
+		set_stopped_child_used_math(tsk);
+		return 0;
+	}
+#endif
+
 	if (cpu_has_fxsr) {
 		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
 
@@ -330,13 +344,13 @@
 	struct user_i387_ia32_struct env;
 	int ret;
 
-	if (!HAVE_HWFP)
-		return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
-
 	ret = init_fpu(target);
 	if (ret)
 		return ret;
 
+	if (!HAVE_HWFP)
+		return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
+
 	if (!cpu_has_fxsr) {
 		return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 					   &target->thread.xstate->fsave, 0,
@@ -360,15 +374,15 @@
 	struct user_i387_ia32_struct env;
 	int ret;
 
-	if (!HAVE_HWFP)
-		return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
-
 	ret = init_fpu(target);
 	if (ret)
 		return ret;
 
 	set_stopped_child_used_math(target);
 
+	if (!HAVE_HWFP)
+		return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
+
 	if (!cpu_has_fxsr) {
 		return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 					  &target->thread.xstate->fsave, 0, -1);
@@ -474,18 +488,18 @@
 int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
 {
 	int err;
+	struct task_struct *tsk = current;
 
-	if (HAVE_HWFP) {
-		struct task_struct *tsk = current;
-
+	if (HAVE_HWFP)
 		clear_fpu(tsk);
 
-		if (!used_math()) {
-			err = init_fpu(tsk);
-			if (err)
-				return err;
-		}
+	if (!used_math()) {
+		err = init_fpu(tsk);
+		if (err)
+			return err;
+	}
 
+	if (HAVE_HWFP) {
 		if (cpu_has_fxsr)
 			err = restore_i387_fxsave(buf);
 		else
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 4bc1be5..08a3098 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -53,7 +53,7 @@
  * have elapsed since the hypervisor wrote the data. So we try to account for
  * that with system time
  */
-unsigned long kvm_get_wallclock(void)
+static unsigned long kvm_get_wallclock(void)
 {
 	u32 wc_sec, wc_nsec;
 	u64 delta;
@@ -86,7 +86,7 @@
 	return ts.tv_sec + 1;
 }
 
-int kvm_set_wallclock(unsigned long now)
+static int kvm_set_wallclock(unsigned long now)
 {
 	return 0;
 }
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index f8476df..6d54833 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -649,8 +649,11 @@
 	/* If the task has used fpu the last 5 timeslices, just do a full
 	 * restore of the math state immediately to avoid the trap; the
 	 * chances of needing FPU soon are obviously high now
+	 *
+	 * tsk_used_math() checks prevent calling math_state_restore(),
+	 * which can sleep in the case of !tsk_used_math()
 	 */
-	if (next_p->fpu_counter > 5)
+	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
 		math_state_restore();
 
 	/*
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e2319f3..ac54ff5 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -658,8 +658,11 @@
 	/* If the task has used fpu the last 5 timeslices, just do a full
 	 * restore of the math state immediately to avoid the trap; the
 	 * chances of needing FPU soon are obviously high now
+	 *
+	 * tsk_used_math() checks prevent calling math_state_restore(),
+	 * which can sleep in the case of !tsk_used_math()
 	 */
-	if (next_p->fpu_counter>5)
+	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
 		math_state_restore();
 	return prev_p;
 }
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3898849..56078d6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1190,6 +1190,7 @@
  */
 void __init native_smp_prepare_cpus(unsigned int max_cpus)
 {
+	preempt_disable();
 	nmi_watchdog_default();
 	smp_cpu_index_default();
 	current_cpu_data = boot_cpu_data;
@@ -1206,7 +1207,7 @@
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
 		disable_smp();
-		return;
+		goto out;
 	}
 
 	preempt_disable();
@@ -1246,6 +1247,8 @@
 	printk(KERN_INFO "CPU%d: ", 0);
 	print_cpu_info(&cpu_data(0));
 	setup_boot_clock();
+out:
+	preempt_enable();
 }
 /*
  * Early setup to make printk work.
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index e479072..068759d 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -14,7 +14,7 @@
 
 #include "mach_timer.h"
 
-static int tsc_enabled;
+static int tsc_disabled;
 
 /*
  * On some systems the TSC frequency does not
@@ -28,8 +28,8 @@
 static int __init tsc_setup(char *str)
 {
 	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
-				"cannot disable TSC completely.\n");
-	mark_tsc_unstable("user disabled TSC");
+	       "cannot disable TSC completely.\n");
+	tsc_disabled = 1;
 	return 1;
 }
 #else
@@ -120,7 +120,7 @@
 	 *   very important for it to be as fast as the platform
 	 *   can achive it. )
 	 */
-	if (unlikely(!tsc_enabled && !tsc_unstable))
+	if (unlikely(tsc_disabled))
 		/* No locking but a rare wrong value is not a big deal: */
 		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
 
@@ -322,7 +322,6 @@
 {
 	if (!tsc_unstable) {
 		tsc_unstable = 1;
-		tsc_enabled = 0;
 		printk("Marking TSC unstable due to: %s.\n", reason);
 		/* Can be called before registration */
 		if (clocksource_tsc.mult)
@@ -336,7 +335,7 @@
 static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
 {
 	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
-		       d->ident);
+	       d->ident);
 	tsc_unstable = 1;
 	return 0;
 }
@@ -403,14 +402,22 @@
 {
 	int cpu;
 
-	if (!cpu_has_tsc)
+	if (!cpu_has_tsc || tsc_disabled) {
+		/* Disable the TSC in case of !cpu_has_tsc */
+		tsc_disabled = 1;
 		return;
+	}
 
 	cpu_khz = calculate_cpu_khz();
 	tsc_khz = cpu_khz;
 
 	if (!cpu_khz) {
 		mark_tsc_unstable("could not calculate TSC khz");
+		/*
+		 * We need to disable the TSC completely in this case
+		 * to prevent sched_clock() from using it.
+		 */
+		tsc_disabled = 1;
 		return;
 	}
 
@@ -441,8 +448,6 @@
 	if (check_tsc_unstable()) {
 		clocksource_tsc.rating = 0;
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
-	} else
-		tsc_enabled = 1;
-
+	}
 	clocksource_register(&clocksource_tsc);
 }
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index fcc16e5..1784b80 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -227,14 +227,14 @@
 	/* hpet or pmtimer available ? */
 	if (!hpet && !pm1 && !pm2) {
 		printk(KERN_INFO "TSC calibrated against PIT\n");
-		return;
+		goto out;
 	}
 
 	/* Check, whether the sampling was disturbed by an SMI */
 	if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
 		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
 		       "using PIT calibration result\n");
-		return;
+		goto out;
 	}
 
 	tsc2 = (tsc2 - tsc1) * 1000000L;
@@ -255,6 +255,7 @@
 
 	tsc_khz = tsc2 / tsc1;
 
+out:
 	for_each_possible_cpu(cpu)
 		set_cyc2ns_scale(tsc_khz, cpu);
 }
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 36c5406..7246b60 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1996,7 +1996,7 @@
 	.seeks = DEFAULT_SEEKS * 10,
 };
 
-void mmu_destroy_caches(void)
+static void mmu_destroy_caches(void)
 {
 	if (pte_chain_cache)
 		kmem_cache_destroy(pte_chain_cache);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index af65b2d..5c7e2fd 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -582,8 +582,9 @@
 		int vector = FIRST_EXTERNAL_VECTOR + i;
 		if (vector != SYSCALL_VECTOR) {
 			set_intr_gate(vector, interrupt[i]);
-			set_irq_chip_and_handler(i, &lguest_irq_controller,
-						 handle_level_irq);
+			set_irq_chip_and_handler_name(i, &lguest_irq_controller,
+						      handle_level_irq,
+						      "level");
 		}
 	}
 	/* This call is required to set up for 4k stacks, where we have
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c
index 4535e6d..d710f2d 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay_32.c
@@ -44,13 +44,36 @@
 static void delay_tsc(unsigned long loops)
 {
 	unsigned long bclock, now;
+	int cpu;
 
-	preempt_disable();		/* TSC's are per-cpu */
+	preempt_disable();
+	cpu = smp_processor_id();
 	rdtscl(bclock);
-	do {
-		rep_nop();
+	for (;;) {
 		rdtscl(now);
-	} while ((now-bclock) < loops);
+		if ((now - bclock) >= loops)
+			break;
+
+		/* Allow RT tasks to run */
+		preempt_enable();
+		rep_nop();
+		preempt_disable();
+
+		/*
+		 * It is possible that we moved to another CPU, and
+		 * since TSC's are per-cpu we need to calculate
+		 * that. The delay must guarantee that we wait "at
+		 * least" the amount of time. Being moved to another
+		 * CPU could make the wait longer but we just need to
+		 * make sure we waited long enough. Rebalance the
+		 * counter for this CPU.
+		 */
+		if (unlikely(cpu != smp_processor_id())) {
+			loops -= (now - bclock);
+			cpu = smp_processor_id();
+			rdtscl(bclock);
+		}
+	}
 	preempt_enable();
 }
 
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
index bbc6105..4c441be 100644
--- a/arch/x86/lib/delay_64.c
+++ b/arch/x86/lib/delay_64.c
@@ -31,14 +31,36 @@
 void __delay(unsigned long loops)
 {
 	unsigned bclock, now;
+	int cpu;
 
-	preempt_disable();		/* TSC's are pre-cpu */
+	preempt_disable();
+	cpu = smp_processor_id();
 	rdtscl(bclock);
-	do {
-		rep_nop(); 
+	for (;;) {
 		rdtscl(now);
+		if ((now - bclock) >= loops)
+			break;
+
+		/* Allow RT tasks to run */
+		preempt_enable();
+		rep_nop();
+		preempt_disable();
+
+		/*
+		 * It is possible that we moved to another CPU, and
+		 * since TSC's are per-cpu we need to calculate
+		 * that. The delay must guarantee that we wait "at
+		 * least" the amount of time. Being moved to another
+		 * CPU could make the wait longer but we just need to
+		 * make sure we waited long enough. Rebalance the
+		 * counter for this CPU.
+		 */
+		if (unlikely(cpu != smp_processor_id())) {
+			loops -= (now - bclock);
+			cpu = smp_processor_id();
+			rdtscl(bclock);
+		}
 	}
-	while ((now-bclock) < loops);
 	preempt_enable();
 }
 EXPORT_SYMBOL(__delay);
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 6e38d87..c7b06fe 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -30,6 +30,7 @@
 #include <asm/uaccess.h>
 #include <asm/desc.h>
 #include <asm/user.h>
+#include <asm/i387.h>
 
 #include "fpu_system.h"
 #include "fpu_emu.h"
@@ -146,6 +147,13 @@
 	unsigned long code_limit = 0;	/* Initialized to stop compiler warnings */
 	struct desc_struct code_descriptor;
 
+	if (!used_math()) {
+		if (init_fpu(current)) {
+			do_group_exit(SIGKILL);
+			return;
+		}
+	}
+
 #ifdef RE_ENTRANT_CHECKING
 	if (emulating) {
 		printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
@@ -153,11 +161,6 @@
 	RE_ENTRANT_CHECK_ON;
 #endif /* RE_ENTRANT_CHECKING */
 
-	if (!used_math()) {
-		finit();
-		set_used_math();
-	}
-
 	SETUP_DATA_AREA(arg);
 
 	FPU_ORIG_EIP = FPU_EIP;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 32ba13b..156e6d7 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -206,7 +206,7 @@
 	pmd_t *last_pmd = pmd + PTRS_PER_PMD;
 
 	for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) {
-		if (!pmd_present(*pmd))
+		if (pmd_none(*pmd))
 			continue;
 		if (vaddr < (unsigned long) _text || vaddr > end)
 			set_pmd(pmd, __pmd(0));
@@ -506,7 +506,7 @@
 
 static void __init early_memtest(unsigned long start, unsigned long end)
 {
-	unsigned long t_start, t_size;
+	u64 t_start, t_size;
 	unsigned pattern;
 
 	if (!memtest_pattern)
@@ -525,7 +525,7 @@
 			if (t_start + t_size > end)
 				t_size = end - t_start;
 
-			printk(KERN_CONT "\n  %016lx - %016lx pattern %d",
+			printk(KERN_CONT "\n  %016llx - %016llx pattern %d",
 				t_start, t_start + t_size, pattern);
 
 			memtest(t_start, t_size, pattern);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 71bb315..2b2bb3f 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -593,10 +593,11 @@
 	unsigned long offset;
 	unsigned int nrpages;
 	enum fixed_addresses idx;
-	unsigned int nesting;
+	int nesting;
 
 	nesting = --early_ioremap_nested;
-	WARN_ON(nesting < 0);
+	if (WARN_ON(nesting < 0))
+		return;
 
 	if (early_ioremap_debug) {
 		printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index de3a998..06b7a1c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -34,7 +34,7 @@
 	printk(KERN_INFO "%s\n", reason);
 }
 
-static int nopat(char *str)
+static int __init nopat(char *str)
 {
 	pat_disable("PAT support disabled.");
 	return 0;
@@ -151,32 +151,33 @@
 	unsigned long pat_type;
 	u8 mtrr_type;
 
-	mtrr_type = mtrr_type_lookup(start, end);
-	if (mtrr_type == 0xFF) {		/* MTRR not enabled */
-		*ret_prot = prot;
-		return 0;
-	}
-	if (mtrr_type == 0xFE) {		/* MTRR match error */
-		*ret_prot = _PAGE_CACHE_UC;
-		return -1;
-	}
-	if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
-	    mtrr_type != MTRR_TYPE_WRBACK &&
-	    mtrr_type != MTRR_TYPE_WRCOMB) {	/* MTRR type unhandled */
-		*ret_prot = _PAGE_CACHE_UC;
-		return -1;
-	}
-
 	pat_type = prot & _PAGE_CACHE_MASK;
 	prot &= (~_PAGE_CACHE_MASK);
 
-	/* Currently doing intersection by hand. Optimize it later. */
+	/*
+	 * We return the PAT request directly for types where PAT takes
+	 * precedence with respect to MTRR and for UC_MINUS.
+	 * Consistency checks with other PAT requests is done later
+	 * while going through memtype list.
+	 */
 	if (pat_type == _PAGE_CACHE_WC) {
 		*ret_prot = prot | _PAGE_CACHE_WC;
+		return 0;
 	} else if (pat_type == _PAGE_CACHE_UC_MINUS) {
 		*ret_prot = prot | _PAGE_CACHE_UC_MINUS;
-	} else if (pat_type == _PAGE_CACHE_UC ||
-	           mtrr_type == MTRR_TYPE_UNCACHABLE) {
+		return 0;
+	} else if (pat_type == _PAGE_CACHE_UC) {
+		*ret_prot = prot | _PAGE_CACHE_UC;
+		return 0;
+	}
+
+	/*
+	 * Look for MTRR hint to get the effective type in case where PAT
+	 * request is for WB.
+	 */
+	mtrr_type = mtrr_type_lookup(start, end);
+
+	if (mtrr_type == MTRR_TYPE_UNCACHABLE) {
 		*ret_prot = prot | _PAGE_CACHE_UC;
 	} else if (mtrr_type == MTRR_TYPE_WRCOMB) {
 		*ret_prot = prot | _PAGE_CACHE_WC;
@@ -233,14 +234,12 @@
 
 	if (req_type == -1) {
 		/*
-		 * Special case where caller wants to inherit from mtrr or
-		 * existing pat mapping, defaulting to UC_MINUS in case of
-		 * no match.
+		 * Call mtrr_lookup to get the type hint. This is an
+		 * optimization for /dev/mem mmap'ers into WB memory (BIOS
+		 * tools and ACPI tools). Use WB request for WB memory and use
+		 * UC_MINUS otherwise.
 		 */
 		u8 mtrr_type = mtrr_type_lookup(start, end);
-		if (mtrr_type == 0xFE) { /* MTRR match error */
-			err = -1;
-		}
 
 		if (mtrr_type == MTRR_TYPE_WRBACK) {
 			req_type = _PAGE_CACHE_WB;
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index e70b9c5..b821f44 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -15,7 +15,8 @@
 	pci_mmcfg_early_init();
 
 #ifdef CONFIG_PCI_OLPC
-	pci_olpc_init();
+	if (!pci_olpc_init())
+		return 0;	/* skip additional checks if it's an XO */
 #endif
 #ifdef CONFIG_PCI_BIOS
 	pci_pcbios_init();
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 5e76365..e11e9e8 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -302,12 +302,13 @@
 	.write = pci_olpc_write,
 };
 
-void __init pci_olpc_init(void)
+int __init pci_olpc_init(void)
 {
 	if (!machine_is_olpc() || olpc_has_vsa())
-		return;
+		return -ENODEV;
 
 	printk(KERN_INFO "PCI: Using configuration type OLPC\n");
 	raw_pci_ops = &pci_olpc_conf;
 	is_lx = is_geode_lx();
+	return 0;
 }
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index f3972b1..720c4c5 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -101,7 +101,7 @@
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
-extern void pci_olpc_init(void);
+extern int pci_olpc_init(void);
 
 /* pci-mmconfig.c */
 
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 23476c2..efa2ba7 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -106,9 +106,9 @@
 		do_realtime((struct timespec *)tv);
 		tv->tv_usec /= 1000;
 		if (unlikely(tz != NULL)) {
-			/* This relies on gcc inlining the memcpy. We'll notice
-			   if it ever fails to do so. */
-			memcpy(tz, &gtod->sys_tz, sizeof(struct timezone));
+			/* Avoid memcpy. Some old compilers fail to inline it */
+			tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
+			tz->tz_dsttime = gtod->sys_tz.tz_dsttime;
 		}
 		return 0;
 	}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 126766d..3525ef5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -60,7 +60,7 @@
 {
 	unsigned int level;
 	pte_t *pte = lookup_address(address, &level);
-	unsigned offset = address & PAGE_MASK;
+	unsigned offset = address & ~PAGE_MASK;
 
 	BUG_ON(pte == NULL);
 
diff --git a/block/blk-core.c b/block/blk-core.c
index 6a9cc0d..1905aab 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -806,35 +806,32 @@
 	rq = get_request(q, rw_flags, bio, GFP_NOIO);
 	while (!rq) {
 		DEFINE_WAIT(wait);
+		struct io_context *ioc;
 		struct request_list *rl = &q->rq;
 
 		prepare_to_wait_exclusive(&rl->wait[rw], &wait,
 				TASK_UNINTERRUPTIBLE);
 
-		rq = get_request(q, rw_flags, bio, GFP_NOIO);
+		blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
 
-		if (!rq) {
-			struct io_context *ioc;
+		__generic_unplug_device(q);
+		spin_unlock_irq(q->queue_lock);
+		io_schedule();
 
-			blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
+		/*
+		 * After sleeping, we become a "batching" process and
+		 * will be able to allocate at least one request, and
+		 * up to a big batch of them for a small period time.
+		 * See ioc_batching, ioc_set_batching
+		 */
+		ioc = current_io_context(GFP_NOIO, q->node);
+		ioc_set_batching(q, ioc);
 
-			__generic_unplug_device(q);
-			spin_unlock_irq(q->queue_lock);
-			io_schedule();
-
-			/*
-			 * After sleeping, we become a "batching" process and
-			 * will be able to allocate at least one request, and
-			 * up to a big batch of them for a small period time.
-			 * See ioc_batching, ioc_set_batching
-			 */
-			ioc = current_io_context(GFP_NOIO, q->node);
-			ioc_set_batching(q, ioc);
-
-			spin_lock_irq(q->queue_lock);
-		}
+		spin_lock_irq(q->queue_lock);
 		finish_wait(&rl->wait[rw], &wait);
-	}
+
+		rq = get_request(q, rw_flags, bio, GFP_NOIO);
+	};
 
 	return rq;
 }
diff --git a/block/blktrace.c b/block/blktrace.c
index b2cbb4e..7ae87cc 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -75,6 +75,23 @@
 	local_irq_restore(flags);
 }
 
+void __trace_note_message(struct blk_trace *bt, const char *fmt, ...)
+{
+	int n;
+	va_list args;
+	char *buf;
+
+	preempt_disable();
+	buf = per_cpu_ptr(bt->msg_data, smp_processor_id());
+	va_start(args, fmt);
+	n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
+	va_end(args);
+
+	trace_note(bt, 0, BLK_TN_MESSAGE, buf, n);
+	preempt_enable();
+}
+EXPORT_SYMBOL_GPL(__trace_note_message);
+
 static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
 			 pid_t pid)
 {
@@ -232,6 +249,7 @@
 	debugfs_remove(bt->dropped_file);
 	blk_remove_tree(bt->dir);
 	free_percpu(bt->sequence);
+	free_percpu(bt->msg_data);
 	kfree(bt);
 }
 
@@ -346,6 +364,10 @@
 	if (!bt->sequence)
 		goto err;
 
+	bt->msg_data = __alloc_percpu(BLK_TN_MAX_MSG);
+	if (!bt->msg_data)
+		goto err;
+
 	ret = -ENOENT;
 	dir = blk_create_tree(buts->name);
 	if (!dir)
@@ -392,6 +414,7 @@
 		if (bt->dropped_file)
 			debugfs_remove(bt->dropped_file);
 		free_percpu(bt->sequence);
+		free_percpu(bt->msg_data);
 		if (bt->rchan)
 			relay_close(bt->rchan);
 		kfree(bt);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index b399c62..d01b411 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -124,6 +124,8 @@
 struct cfq_queue {
 	/* reference count */
 	atomic_t ref;
+	/* various state flags, see below */
+	unsigned int flags;
 	/* parent cfq_data */
 	struct cfq_data *cfqd;
 	/* service_tree member */
@@ -138,14 +140,14 @@
 	int queued[2];
 	/* currently allocated requests */
 	int allocated[2];
-	/* pending metadata requests */
-	int meta_pending;
 	/* fifo list of requests in sort_list */
 	struct list_head fifo;
 
 	unsigned long slice_end;
 	long slice_resid;
 
+	/* pending metadata requests */
+	int meta_pending;
 	/* number of requests that are on the dispatch list or inside driver */
 	int dispatched;
 
@@ -153,8 +155,6 @@
 	unsigned short ioprio, org_ioprio;
 	unsigned short ioprio_class, org_ioprio_class;
 
-	/* various state flags, see below */
-	unsigned int flags;
 };
 
 enum cfqq_state_flags {
@@ -1142,6 +1142,9 @@
 	kmem_cache_free(cfq_pool, cfqq);
 }
 
+/*
+ * Must always be called with the rcu_read_lock() held
+ */
 static void
 __call_for_each_cic(struct io_context *ioc,
 		    void (*func)(struct io_context *, struct cfq_io_context *))
@@ -1197,6 +1200,11 @@
 	cfq_cic_free(cic);
 }
 
+/*
+ * Must be called with rcu_read_lock() held or preemption otherwise disabled.
+ * Only two callers of this - ->dtor() which is called with the rcu_read_lock(),
+ * and ->trim() which is called with the task lock held
+ */
 static void cfq_free_io_context(struct io_context *ioc)
 {
 	/*
@@ -1502,20 +1510,24 @@
 cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc)
 {
 	struct cfq_io_context *cic;
+	unsigned long flags;
 	void *k;
 
 	if (unlikely(!ioc))
 		return NULL;
 
+	rcu_read_lock();
+
 	/*
 	 * we maintain a last-hit cache, to avoid browsing over the tree
 	 */
 	cic = rcu_dereference(ioc->ioc_data);
-	if (cic && cic->key == cfqd)
+	if (cic && cic->key == cfqd) {
+		rcu_read_unlock();
 		return cic;
+	}
 
 	do {
-		rcu_read_lock();
 		cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
 		rcu_read_unlock();
 		if (!cic)
@@ -1524,10 +1536,13 @@
 		k = cic->key;
 		if (unlikely(!k)) {
 			cfq_drop_dead_cic(cfqd, ioc, cic);
+			rcu_read_lock();
 			continue;
 		}
 
+		spin_lock_irqsave(&ioc->lock, flags);
 		rcu_assign_pointer(ioc->ioc_data, cic);
+		spin_unlock_irqrestore(&ioc->lock, flags);
 		break;
 	} while (1);
 
@@ -2134,6 +2149,10 @@
 
 static void cfq_slab_kill(void)
 {
+	/*
+	 * Caller already ensured that pending RCU callbacks are completed,
+	 * so we should have no busy allocations at this point.
+	 */
 	if (cfq_pool)
 		kmem_cache_destroy(cfq_pool);
 	if (cfq_ioc_pool)
@@ -2292,6 +2311,11 @@
 	ioc_gone = &all_gone;
 	/* ioc_gone's update must be visible before reading ioc_count */
 	smp_wmb();
+
+	/*
+	 * this also protects us from entering cfq_slab_kill() with
+	 * pending RCU callbacks
+	 */
 	if (elv_ioc_count_read(ioc_count))
 		wait_for_completion(ioc_gone);
 	cfq_slab_kill();
diff --git a/block/elevator.c b/block/elevator.c
index 980f8ae..902dd13 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -1110,6 +1110,8 @@
 	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
 	spin_unlock_irq(q->queue_lock);
 
+	blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
+
 	return 1;
 
 fail_register:
diff --git a/block/genhd.c b/block/genhd.c
index 129ad93..b922d48 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -660,6 +660,8 @@
 
 	mutex_lock(&block_class_lock);
 	list_for_each_entry(dev, &block_class.devices, node) {
+		if (dev->type != &disk_type)
+			continue;
 		if (strcmp(dev->bus_id, name) == 0) {
 			struct gendisk *disk = dev_to_disk(dev);
 
diff --git a/crypto/cts.c b/crypto/cts.c
index c4e70bf..ccf9c5d 100644
--- a/crypto/cts.c
+++ b/crypto/cts.c
@@ -89,6 +89,9 @@
 	if (lastn < 0)
 		return -EINVAL;
 
+	sg_init_table(sgsrc, 1);
+	sg_init_table(sgdst, 1);
+
 	memset(s, 0, sizeof(s));
 	scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
 
@@ -172,6 +175,9 @@
 	if (lastn < 0)
 		return -EINVAL;
 
+	sg_init_table(sgsrc, 1);
+	sg_init_table(sgdst, 1);
+
 	scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
 
 	lcldesc.tfm = ctx->child;
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index e48a3ea..2509809 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -565,7 +565,7 @@
 
 				acpi_os_release_mutex(method_desc->method.
 						      mutex->mutex.os_mutex);
-				method_desc->method.mutex->mutex.thread_id = 0;
+				method_desc->method.mutex->mutex.thread_id = NULL;
 			}
 		}
 
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
index c873ab4..a8bf3d7 100644
--- a/drivers/acpi/executer/exmutex.c
+++ b/drivers/acpi/executer/exmutex.c
@@ -326,7 +326,7 @@
 
 	/* Clear mutex info */
 
-	obj_desc->mutex.thread_id = 0;
+	obj_desc->mutex.thread_id = NULL;
 	return_ACPI_STATUS(status);
 }
 
@@ -463,7 +463,7 @@
 		/* Mark mutex unowned */
 
 		obj_desc->mutex.owner_thread = NULL;
-		obj_desc->mutex.thread_id = 0;
+		obj_desc->mutex.thread_id = NULL;
 
 		/* Update Thread sync_level (Last mutex is the important one) */
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 97f83fb..544b7d6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -502,10 +502,10 @@
 	{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci },		/* MCP7B */
 	{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci },		/* MCP7B */
 	{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci },		/* MCP7B */
+	{ PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci },		/* MCP7B */
+	{ PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci },		/* MCP7B */
+	{ PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci },		/* MCP7B */
+	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
 
 	/* SiS */
 	{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a9027b8..81b7ae3 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -247,10 +247,11 @@
 	{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller 2 IDE (ICH8) */
 	{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
-	/* Mobile SATA Controller IDE (ICH8M) */
-	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* Mobile SATA Controller IDE (ICH8M), Apple */
 	{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
+	{ 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+	/* Mobile SATA Controller IDE (ICH8M) */
+	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH9) */
 	{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH9) */
@@ -526,7 +527,7 @@
 
 	[ich8m_apple_sata] =
 	{
-		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
+		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= ATA_UDMA6,
@@ -573,6 +574,8 @@
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
 	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on ACER Aspire 2023WLMi */
+	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
+	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
 	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
 	/* end marker */
 	{ 0, }
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index dbf6ca7..3ff8b14 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -118,12 +118,62 @@
 		ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
 }
 
-static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device
-				    *dev, u32 event)
+static void ata_acpi_eject_device(acpi_handle handle)
+{
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = 1;
+
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
+					      &arg_list, NULL)))
+		printk(KERN_ERR "Failed to evaluate _EJ0!\n");
+}
+
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+	if (dev)
+		dev->flags |= ATA_DFLAG_DETACH;
+	else {
+		struct ata_link *tlink;
+		struct ata_device *tdev;
+
+		ata_port_for_each_link(tlink, ap)
+			ata_link_for_each_dev(tdev, tlink)
+				tdev->flags |= ATA_DFLAG_DETACH;
+	}
+
+	ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ * @is_dock_event: boolean indicating whether the event was a dock one
+ *
+ * All ACPI bay / device realted events end up in this function.  If
+ * the event is port-wide @dev is NULL.  If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context.  May sleep.
+ */
+static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
+				    u32 event, int is_dock_event)
 {
 	char event_string[12];
 	char *envp[] = { event_string, NULL };
-	struct ata_eh_info *ehi;
+	struct ata_eh_info *ehi = &ap->link.eh_info;
 	struct kobject *kobj = NULL;
 	int wait = 0;
 	unsigned long flags;
@@ -131,87 +181,100 @@
 	unsigned long sta;
 	acpi_status status;
 
-	if (!ap)
-		ap = dev->link->ap;
-	ehi = &ap->link.eh_info;
-
-	spin_lock_irqsave(ap->lock, flags);
-
-	if (dev)
+	if (dev) {
+		if (dev->sdev)
+			kobj = &dev->sdev->sdev_gendev.kobj;
 		handle = dev->acpi_handle;
-	else
+	} else {
+		kobj = &ap->dev->kobj;
 		handle = ap->acpi_handle;
+	}
 
 	status = acpi_get_handle(handle, "_EJ0", &tmphandle);
-	if (ACPI_FAILURE(status)) {
-		/* This device is not ejectable */
-		spin_unlock_irqrestore(ap->lock, flags);
+	if (ACPI_FAILURE(status))
+		/* This device does not support hotplug */
 		return;
-	}
 
-	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-	if (ACPI_FAILURE(status)) {
-		printk ("Unable to determine bay status\n");
-		spin_unlock_irqrestore(ap->lock, flags);
-		return;
-	}
+	spin_lock_irqsave(ap->lock, flags);
 
 	switch (event) {
 	case ACPI_NOTIFY_BUS_CHECK:
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		ata_ehi_push_desc(ehi, "ACPI event");
-		if (!sta) {
-                /* Device has been unplugged */
-			if (dev)
-				dev->flags |= ATA_DFLAG_DETACH;
-			else {
-				struct ata_link *tlink;
-				struct ata_device *tdev;
 
-				ata_port_for_each_link(tlink, ap) {
-					ata_link_for_each_dev(tdev, tlink) {
-						tdev->flags |=
-							ATA_DFLAG_DETACH;
-					}
-				}
-			}
-			ata_port_schedule_eh(ap);
-			wait = 1;
-		} else {
+		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+		if (ACPI_FAILURE(status)) {
+			ata_port_printk(ap, KERN_ERR,
+				"acpi: failed to determine bay status (0x%x)\n",
+				status);
+			break;
+		}
+
+		if (sta) {
 			ata_ehi_hotplugged(ehi);
 			ata_port_freeze(ap);
+		} else {
+			/* The device has gone - unplug it */
+			ata_acpi_detach_device(ap, dev);
+			wait = 1;
 		}
+		break;
+	case ACPI_NOTIFY_EJECT_REQUEST:
+		ata_ehi_push_desc(ehi, "ACPI event");
+
+		if (!is_dock_event)
+			break;
+
+		/* undock event - immediate unplug */
+		ata_acpi_detach_device(ap, dev);
+		wait = 1;
+		break;
 	}
 
+	/* make sure kobj doesn't go away while ap->lock is released */
+	kobject_get(kobj);
+
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	if (wait)
+	if (wait) {
 		ata_port_wait_eh(ap);
+		ata_acpi_eject_device(handle);
+	}
 
-	if (dev) {
-		if (dev->sdev)
-			kobj = &dev->sdev->sdev_gendev.kobj;
-	} else
-		kobj = &ap->dev->kobj;
-
-	if (kobj) {
+	if (kobj && !is_dock_event) {
 		sprintf(event_string, "BAY_EVENT=%d", event);
 		kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
 	}
+
+	kobject_put(kobj);
+}
+
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+	struct ata_device *dev = data;
+
+	ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+	struct ata_port *ap = data;
+
+	ata_acpi_handle_hotplug(ap, NULL, event, 1);
 }
 
 static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct ata_device *dev = data;
 
-	ata_acpi_handle_hotplug(NULL, dev, event);
+	ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0);
 }
 
 static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct ata_port *ap = data;
 
-	ata_acpi_handle_hotplug(ap, NULL, event);
+	ata_acpi_handle_hotplug(ap, NULL, event, 0);
 }
 
 /**
@@ -252,7 +315,7 @@
 						    ata_acpi_ap_notify, ap);
 			/* we might be on a docking station */
 			register_hotplug_dock_device(ap->acpi_handle,
-						     ata_acpi_ap_notify, ap);
+					     ata_acpi_ap_notify_dock, ap);
 		}
 
 		for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
@@ -264,7 +327,7 @@
 						ata_acpi_dev_notify, dev);
 				/* we might be on a docking station */
 				register_hotplug_dock_device(dev->acpi_handle,
-						ata_acpi_dev_notify, dev);
+					     ata_acpi_dev_notify_dock, dev);
 			}
 		}
 	}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3c89f20..cc816ca 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5403,7 +5403,7 @@
  */
 static void ata_finalize_port_ops(struct ata_port_operations *ops)
 {
-	static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+	static DEFINE_SPINLOCK(lock);
 	const struct ata_port_operations *cur;
 	void **begin = (void **)ops;
 	void **end = (void **)&ops->inherits;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 0f9386d..7daf4c0 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -322,9 +322,12 @@
 	if (vendor == 0x1095 && devid == 0x3726) {
 		/* sil3726 quirks */
 		ata_port_for_each_link(link, ap) {
-			/* class code report is unreliable */
+			/* Class code report is unreliable and SRST
+			 * times out under certain configurations.
+			 */
 			if (link->pmp < 5)
-				link->flags |= ATA_LFLAG_ASSUME_ATA;
+				link->flags |= ATA_LFLAG_NO_SRST |
+					       ATA_LFLAG_ASSUME_ATA;
 
 			/* port 5 is for SEMB device and it doesn't like SRST */
 			if (link->pmp == 5)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index aeb6e01..2e6e162 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1637,6 +1637,7 @@
 
 /**
  *	ata_scsi_rbuf_get - Map response buffer.
+ *	@cmd: SCSI command containing buffer to be mapped.
  *	@flags: unsigned long variable to store irq enable status
  *	@copy_in: copy in from user buffer
  *
@@ -1954,7 +1955,7 @@
 
 /**
  *	ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
- *	@bufp: output buffer
+ *	@buf: output buffer
  *
  *	Generate a generic MODE SENSE r/w error recovery page.
  *
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 3c2d228..215d186 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -247,7 +247,7 @@
  *	LOCKING:
  *	Inherited from caller.
  */
-u8 ata_sff_altstatus(struct ata_port *ap)
+static u8 ata_sff_altstatus(struct ata_port *ap)
 {
 	if (ap->ops->sff_check_altstatus)
 		return ap->ops->sff_check_altstatus(ap);
@@ -256,6 +256,93 @@
 }
 
 /**
+ *	ata_sff_irq_status - Check if the device is busy
+ *	@ap: port where the device is
+ *
+ *	Determine if the port is currently busy. Uses altstatus
+ *	if available in order to avoid clearing shared IRQ status
+ *	when finding an IRQ source. Non ctl capable devices don't
+ *	share interrupt lines fortunately for us.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static u8 ata_sff_irq_status(struct ata_port *ap)
+{
+	u8 status;
+
+	if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+		status = ata_sff_altstatus(ap);
+		/* Not us: We are busy */
+		if (status & ATA_BUSY)
+		    	return status;
+	}
+	/* Clear INTRQ latch */
+	status = ap->ops->sff_check_status(ap);
+	return status;
+}
+
+/**
+ *	ata_sff_sync - Flush writes
+ *	@ap: Port to wait for.
+ *
+ *	CAUTION:
+ *	If we have an mmio device with no ctl and no altstatus
+ *	method this will fail. No such devices are known to exist.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+static void ata_sff_sync(struct ata_port *ap)
+{
+	if (ap->ops->sff_check_altstatus)
+		ap->ops->sff_check_altstatus(ap);
+	else if (ap->ioaddr.altstatus_addr)
+		ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ *	ata_sff_pause		-	Flush writes and wait 400nS
+ *	@ap: Port to pause for.
+ *
+ *	CAUTION:
+ *	If we have an mmio device with no ctl and no altstatus
+ *	method this will fail. No such devices are known to exist.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+void ata_sff_pause(struct ata_port *ap)
+{
+	ata_sff_sync(ap);
+	ndelay(400);
+}
+
+/**
+ *	ata_sff_dma_pause	-	Pause before commencing DMA
+ *	@ap: Port to pause for.
+ *
+ *	Perform I/O fencing and ensure sufficient cycle delays occur
+ *	for the HDMA1:0 transition
+ */
+ 
+void ata_sff_dma_pause(struct ata_port *ap)
+{
+	if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+		/* An altstatus read will cause the needed delay without
+		   messing up the IRQ status */
+		ata_sff_altstatus(ap);
+		return;
+	}
+	/* There are no DMA controllers without ctl. BUG here to ensure
+	   we never violate the HDMA1:0 transition timing and risk
+	   corruption. */
+	BUG();
+}
+
+/**
  *	ata_sff_busy_sleep - sleep until BSY clears, or timeout
  *	@ap: port containing status register to be polled
  *	@tmout_pat: impatience timeout
@@ -742,7 +829,7 @@
 	} else
 		ata_pio_sector(qc);
 
-	ata_sff_altstatus(qc->ap); /* flush */
+	ata_sff_sync(qc->ap); /* flush */
 }
 
 /**
@@ -763,8 +850,9 @@
 	WARN_ON(qc->dev->cdb_len < 12);
 
 	ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
-	ata_sff_altstatus(ap); /* flush */
-
+	ata_sff_sync(ap);
+	/* FIXME: If the CDB is for DMA do we need to do the transition delay
+	   or is bmdma_start guaranteed to do it ? */
 	switch (qc->tf.protocol) {
 	case ATAPI_PROT_PIO:
 		ap->hsm_task_state = HSM_ST;
@@ -905,7 +993,7 @@
 
 	if (unlikely(__atapi_pio_bytes(qc, bytes)))
 		goto err_out;
-	ata_sff_altstatus(ap); /* flush */
+	ata_sff_sync(ap); /* flush */
 
 	return;
 
@@ -1489,14 +1577,10 @@
 		goto idle_irq;
 	}
 
-	/* check altstatus */
-	status = ata_sff_altstatus(ap);
-	if (status & ATA_BUSY)
-		goto idle_irq;
 
-	/* check main status, clearing INTRQ */
-	status = ap->ops->sff_check_status(ap);
-	if (unlikely(status & ATA_BUSY))
+	/* check main status, clearing INTRQ if needed */
+	status = ata_sff_irq_status(ap);
+	if (status & ATA_BUSY)
 		goto idle_irq;
 
 	/* ack bmdma irq events */
@@ -2030,7 +2114,7 @@
 		ap->ops->bmdma_stop(qc);
 	}
 
-	ata_sff_altstatus(ap);
+	ata_sff_sync(ap);		/* FIXME: We don't need this */
 	ap->ops->sff_check_status(ap);
 	ap->ops->sff_irq_clear(ap);
 
@@ -2203,7 +2287,7 @@
 		 mmio + ATA_DMA_CMD);
 
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_sff_altstatus(ap);        /* dummy read */
+	ata_sff_dma_pause(ap);
 }
 
 /**
@@ -2722,7 +2806,8 @@
 EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
 EXPORT_SYMBOL_GPL(ata_sff_dev_select);
 EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
+EXPORT_SYMBOL_GPL(ata_sff_pause);
 EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
 EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
 EXPORT_SYMBOL_GPL(ata_sff_tf_load);
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 1713843..cf9e984 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -270,7 +270,7 @@
 	disable_dma(state->dma);
 
 	/* see ata_bmdma_stop */
-	ata_sff_altstatus(ap);
+	ata_sff_dma_pause(ap);
 }
 
 static u8 pata_icside_bmdma_status(struct ata_port *ap)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index a108d25..f8b3ffc 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -57,7 +57,9 @@
 	struct ata_host *ah = ap->host;
 	struct rb532_cf_info *info = ah->private_data;
 
-	ata_sff_altstatus(ap);
+	/* FIXME: Keep previous delay. If this is merely a fence then
+	   ata_sff_sync might be sufficient. */
+	ata_sff_dma_pause(ap);
 	ndelay(RB500_CF_IO_DELAY);
 
 	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index e965b25..bbf5aa3 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -726,7 +726,7 @@
 		 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
 
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_sff_altstatus(ap);	/* dummy read */
+	ata_sff_dma_pause(ap);	/* dummy read */
 }
 
 /**
@@ -747,7 +747,8 @@
 		return host_stat;
 
 	/* errata A252,A308 workaround: Step4 */
-	if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+	if ((scc_check_altstatus(ap) & ATA_ERR)
+					&& (int_status & INTSTS_INTRQ))
 		return (host_stat | ATA_DMA_INTR);
 
 	/* errata A308 workaround Step5 */
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 853559e..3924e72 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,7 @@
 
 	SATA_FSL_HOST_FLAGS	= (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				ATA_FLAG_NCQ),
+				ATA_FLAG_PMP | ATA_FLAG_NCQ),
 
 	SATA_FSL_MAX_CMDS	= SATA_FSL_QUEUE_DEPTH,
 	SATA_FSL_CMD_HDR_SIZE	= 16,	/* 4 DWORDS */
@@ -395,7 +395,7 @@
 	cd = (struct command_desc *)pp->cmdentry + tag;
 	cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
 
-	ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
+	ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
 
 	VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
 		cd->cfis[0], cd->cfis[1], cd->cfis[2]);
@@ -438,6 +438,8 @@
 		ioread32(CA + hcr_base),
 		ioread32(CE + hcr_base), ioread32(CC + hcr_base));
 
+	iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
+
 	/* Simply queue command to the controller/device */
 	iowrite32(1 << tag, CQ + hcr_base);
 
@@ -558,11 +560,36 @@
 		ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
 }
 
+static void sata_fsl_pmp_attach(struct ata_port *ap)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+
+	temp = ioread32(hcr_base + HCONTROL);
+	iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
+}
+
+static void sata_fsl_pmp_detach(struct ata_port *ap)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+
+	temp = ioread32(hcr_base + HCONTROL);
+	temp &= ~HCONTROL_PMP_ATTACHED;
+	iowrite32(temp, hcr_base + HCONTROL);
+
+	/* enable interrupts on the controller/port */
+	temp = ioread32(hcr_base + HCONTROL);
+	iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
+
+}
+
 static int sata_fsl_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
 	struct sata_fsl_port_priv *pp;
-	int retval;
 	void *mem;
 	dma_addr_t mem_dma;
 	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
@@ -688,12 +715,13 @@
 }
 
 static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
-			      unsigned long deadline)
+					unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	struct sata_fsl_port_priv *pp = ap->private_data;
 	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
+	int pmp = sata_srst_pmp(link);
 	u32 temp;
 	struct ata_taskfile tf;
 	u8 *cfis;
@@ -703,6 +731,9 @@
 
 	DPRINTK("in xx_softreset\n");
 
+	if (pmp != SATA_PMP_CTRL_PORT)
+		goto issue_srst;
+
 try_offline_again:
 	/*
 	 * Force host controller to go off-line, aborting current operations
@@ -746,6 +777,7 @@
 
 	temp = ioread32(hcr_base + HCONTROL);
 	temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
+	temp |= HCONTROL_PMP_ATTACHED;
 	iowrite32(temp, hcr_base + HCONTROL);
 
 	temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
@@ -771,7 +803,8 @@
 		ata_port_printk(ap, KERN_WARNING,
 				"No Device OR PHYRDY change,Hstatus = 0x%x\n",
 				ioread32(hcr_base + HSTATUS));
-		goto err;
+		*class = ATA_DEV_NONE;
+		goto out;
 	}
 
 	/*
@@ -783,7 +816,8 @@
 
 	if ((temp & 0xFF) != 0x18) {
 		ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
-		goto err;
+		*class = ATA_DEV_NONE;
+		goto out;
 	} else {
 		ata_port_printk(ap, KERN_INFO,
 				"Signature Update detected @ %d msecs\n",
@@ -798,6 +832,7 @@
 	 * reached here, we can send a command to the target device
 	 */
 
+issue_srst:
 	DPRINTK("Sending SRST/device reset\n");
 
 	ata_tf_init(link->device, &tf);
@@ -808,7 +843,7 @@
 				     SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
 
 	tf.ctl |= ATA_SRST;	/* setup SRST bit in taskfile control reg */
-	ata_tf_to_fis(&tf, 0, 0, cfis);
+	ata_tf_to_fis(&tf, pmp, 0, cfis);
 
 	DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
 		cfis[0], cfis[1], cfis[2], cfis[3]);
@@ -854,8 +889,10 @@
 	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
 
 	tf.ctl &= ~ATA_SRST;	/* 2nd H2D Ctl. register FIS */
-	ata_tf_to_fis(&tf, 0, 0, cfis);
+	ata_tf_to_fis(&tf, pmp, 0, cfis);
 
+	if (pmp != SATA_PMP_CTRL_PORT)
+		iowrite32(pmp, CQPMP + hcr_base);
 	iowrite32(1, CQ + hcr_base);
 	msleep(150);		/* ?? */
 
@@ -886,12 +923,21 @@
 		VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
 	}
 
+out:
 	return 0;
 
 err:
 	return -EIO;
 }
 
+static void sata_fsl_error_handler(struct ata_port *ap)
+{
+
+	DPRINTK("in xx_error_handler\n");
+	sata_pmp_error_handler(ap);
+
+}
+
 static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	if (qc->flags & ATA_QCFLAG_FAILED)
@@ -905,18 +951,21 @@
 
 static void sata_fsl_error_intr(struct ata_port *ap)
 {
-	struct ata_link *link = &ap->link;
-	struct ata_eh_info *ehi = &link->eh_info;
 	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
-	u32 hstatus, dereg, cereg = 0, SError = 0;
+	u32 hstatus, dereg=0, cereg = 0, SError = 0;
 	unsigned int err_mask = 0, action = 0;
-	struct ata_queued_cmd *qc;
-	int freeze = 0;
+	int freeze = 0, abort=0;
+	struct ata_link *link = NULL;
+	struct ata_queued_cmd *qc = NULL;
+	struct ata_eh_info *ehi;
 
 	hstatus = ioread32(hcr_base + HSTATUS);
 	cereg = ioread32(hcr_base + CE);
 
+	/* first, analyze and record host port events */
+	link = &ap->link;
+	ehi = &link->eh_info;
 	ata_ehi_clear_desc(ehi);
 
 	/*
@@ -926,12 +975,41 @@
 	sata_fsl_scr_read(ap, SCR_ERROR, &SError);
 	if (unlikely(SError & 0xFFFF0000)) {
 		sata_fsl_scr_write(ap, SCR_ERROR, SError);
-		err_mask |= AC_ERR_ATA_BUS;
 	}
 
 	DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
 		hstatus, cereg, ioread32(hcr_base + DE), SError);
 
+	/* handle fatal errors */
+	if (hstatus & FATAL_ERROR_DECODE) {
+		ehi->err_mask |= AC_ERR_ATA_BUS;
+		ehi->action |= ATA_EH_SOFTRESET;
+
+		/*
+		 * Ignore serror in case of fatal errors as we always want
+		 * to do a soft-reset of the FSL SATA controller. Analyzing
+		 * serror may cause libata to schedule a hard-reset action,
+		 * and hard-reset currently does not do controller
+		 * offline/online, causing command timeouts and leads to an
+		 * un-recoverable state, hence make libATA ignore
+		 * autopsy in case of fatal errors.
+		 */
+
+		ehi->flags |= ATA_EHI_NO_AUTOPSY;
+
+		freeze = 1;
+	}
+
+	/* Handle PHYRDY change notification */
+	if (hstatus & INT_ON_PHYRDY_CHG) {
+		DPRINTK("SATA FSL: PHYRDY change indication\n");
+
+		/* Setup a soft-reset EH action */
+		ata_ehi_hotplugged(ehi);
+		ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
+		freeze = 1;
+	}
+
 	/* handle single device errors */
 	if (cereg) {
 		/*
@@ -943,58 +1021,68 @@
 		 * clearing the device error, we can issue commands to the
 		 * device to interrogate it to find the source of the error.
 		 */
-		dereg = ioread32(hcr_base + DE);
-		iowrite32(dereg, hcr_base + DE);
-		iowrite32(cereg, hcr_base + CE);
+		abort = 1;
 
 		DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
 			ioread32(hcr_base + CE), ioread32(hcr_base + DE));
-		/*
-		 * We should consider this as non fatal error, and TF must
-		 * be updated as done below.
-		 */
 
-		err_mask |= AC_ERR_DEV;
-	}
+		/* find out the offending link and qc */
+		if (ap->nr_pmp_links) {
+			dereg = ioread32(hcr_base + DE);
+			iowrite32(dereg, hcr_base + DE);
+			iowrite32(cereg, hcr_base + CE);
 
-	/* handle fatal errors */
-	if (hstatus & FATAL_ERROR_DECODE) {
-		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_RESET;
-		/* how will fatal error interrupts be completed ?? */
-		freeze = 1;
-	}
+			if (dereg < ap->nr_pmp_links) {
+				link = &ap->pmp_link[dereg];
+				ehi = &link->eh_info;
+				qc = ata_qc_from_tag(ap, link->active_tag);
+				/*
+				 * We should consider this as non fatal error,
+                                 * and TF must be updated as done below.
+		                 */
 
-	/* Handle PHYRDY change notification */
-	if (hstatus & INT_ON_PHYRDY_CHG) {
-		DPRINTK("SATA FSL: PHYRDY change indication\n");
+				err_mask |= AC_ERR_DEV;
 
-		/* Setup a soft-reset EH action */
-		ata_ehi_hotplugged(ehi);
-		freeze = 1;
+			} else {
+				err_mask |= AC_ERR_HSM;
+				action |= ATA_EH_HARDRESET;
+				freeze = 1;
+			}
+		} else {
+			dereg = ioread32(hcr_base + DE);
+			iowrite32(dereg, hcr_base + DE);
+			iowrite32(cereg, hcr_base + CE);
+
+			qc = ata_qc_from_tag(ap, link->active_tag);
+			/*
+			 * We should consider this as non fatal error,
+                         * and TF must be updated as done below.
+	                */
+			err_mask |= AC_ERR_DEV;
+		}
 	}
 
 	/* record error info */
-	qc = ata_qc_from_tag(ap, link->active_tag);
-
-	if (qc)
+	if (qc) {
 		qc->err_mask |= err_mask;
-	else
+	} else
 		ehi->err_mask |= err_mask;
 
 	ehi->action |= action;
-	ehi->serror |= SError;
 
 	/* freeze or abort */
 	if (freeze)
 		ata_port_freeze(ap);
-	else
-		ata_port_abort(ap);
+	else if (abort) {
+		if (qc)
+			ata_link_abort(qc->dev->link);
+		else
+			ata_port_abort(ap);
+	}
 }
 
 static void sata_fsl_host_intr(struct ata_port *ap)
 {
-	struct ata_link *link = &ap->link;
 	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
 	u32 hstatus, qc_active = 0;
@@ -1017,10 +1105,19 @@
 		return;
 	}
 
-	if (link->sactive) {	/* only true for NCQ commands */
+	/* Read command completed register */
+	qc_active = ioread32(hcr_base + CC);
+
+	VPRINTK("Status of all queues :\n");
+	VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
+		qc_active,
+		ioread32(hcr_base + CA),
+		ioread32(hcr_base + CE),
+		ioread32(hcr_base + CQ),
+		ap->qc_active);
+
+	if (qc_active & ap->qc_active) {
 		int i;
-		/* Read command completed register */
-		qc_active = ioread32(hcr_base + CC);
 		/* clear CC bit, this will also complete the interrupt */
 		iowrite32(qc_active, hcr_base + CC);
 
@@ -1032,8 +1129,9 @@
 		for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
 			if (qc_active & (1 << i)) {
 				qc = ata_qc_from_tag(ap, i);
-				if (qc)
+				if (qc) {
 					ata_qc_complete(qc);
+				}
 				DPRINTK
 				    ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
 				     i, ioread32(hcr_base + CC),
@@ -1042,19 +1140,21 @@
 		}
 		return;
 
-	} else if (ap->qc_active) {
+	} else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
 		iowrite32(1, hcr_base + CC);
-		qc = ata_qc_from_tag(ap, link->active_tag);
+		qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
 
-		DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
-			link->active_tag, ioread32(hcr_base + CC));
+		DPRINTK("completing non-ncq cmd, CC=0x%x\n",
+			 ioread32(hcr_base + CC));
 
-		if (qc)
+		if (qc) {
 			ata_qc_complete(qc);
+		}
 	} else {
 		/* Spurious Interrupt!! */
 		DPRINTK("spurious interrupt!!, CC = 0x%x\n",
 			ioread32(hcr_base + CC));
+		iowrite32(qc_active, hcr_base + CC);
 		return;
 	}
 }
@@ -1130,9 +1230,6 @@
 	iowrite32(0x00000FFFF, hcr_base + CE);
 	iowrite32(0x00000FFFF, hcr_base + DE);
 
-	/* initially assuming no Port multiplier, set CQPMP to 0 */
-	iowrite32(0x0, hcr_base + CQPMP);
-
 	/*
 	 * host controller will be brought on-line, during xx_port_start()
 	 * callback, that should also initiate the OOB, COMINIT sequence
@@ -1154,8 +1251,8 @@
 	.dma_boundary = ATA_DMA_BOUNDARY,
 };
 
-static const struct ata_port_operations sata_fsl_ops = {
-	.inherits = &sata_port_ops,
+static struct ata_port_operations sata_fsl_ops = {
+	.inherits		= &sata_pmp_port_ops,
 
 	.qc_prep = sata_fsl_qc_prep,
 	.qc_issue = sata_fsl_qc_issue,
@@ -1168,10 +1265,15 @@
 	.thaw = sata_fsl_thaw,
 	.prereset = sata_fsl_prereset,
 	.softreset = sata_fsl_softreset,
+	.pmp_softreset = sata_fsl_softreset,
+	.error_handler = sata_fsl_error_handler,
 	.post_internal_cmd = sata_fsl_post_internal_cmd,
 
 	.port_start = sata_fsl_port_start,
 	.port_stop = sata_fsl_port_stop,
+
+	.pmp_attach = sata_fsl_pmp_attach,
+	.pmp_detach = sata_fsl_pmp_detach,
 };
 
 static const struct ata_port_info sata_fsl_port_info[] = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index fb81f0c..60391e9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -72,7 +72,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"1.21"
+#define DRV_VERSION	"1.24"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -122,8 +122,6 @@
 	/* Host Flags */
 	MV_FLAG_DUAL_HC		= (1 << 30),  /* two SATA Host Controllers */
 	MV_FLAG_IRQ_COALESCE	= (1 << 29),  /* IRQ coalescing capability */
-	/* SoC integrated controllers, no PCI interface */
-	MV_FLAG_SOC		= (1 << 28),
 
 	MV_COMMON_FLAGS		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
@@ -226,6 +224,11 @@
 
 	PHY_MODE3		= 0x310,
 	PHY_MODE4		= 0x314,
+	PHY_MODE4_CFG_MASK	= 0x00000003,	/* phy internal config field */
+	PHY_MODE4_CFG_VALUE	= 0x00000001,	/* phy internal config field */
+	PHY_MODE4_RSVD_ZEROS	= 0x5de3fffa,	/* Gen2e always write zeros */
+	PHY_MODE4_RSVD_ONES	= 0x00000005,	/* Gen2e always write ones */
+
 	PHY_MODE2		= 0x330,
 	SATA_IFCTL_OFS		= 0x344,
 	SATA_TESTCTL_OFS	= 0x348,
@@ -356,12 +359,12 @@
 	MV_HP_ERRATA_50XXB2	= (1 << 2),
 	MV_HP_ERRATA_60X1B2	= (1 << 3),
 	MV_HP_ERRATA_60X1C0	= (1 << 4),
-	MV_HP_ERRATA_XX42A0	= (1 << 5),
 	MV_HP_GEN_I		= (1 << 6),	/* Generation I: 50xx */
 	MV_HP_GEN_II		= (1 << 7),	/* Generation II: 60xx */
 	MV_HP_GEN_IIE		= (1 << 8),	/* Generation IIE: 6042/7042 */
 	MV_HP_PCIE		= (1 << 9),	/* PCIe bus/regs: 7042 */
 	MV_HP_CUT_THROUGH	= (1 << 10),	/* can use EDMA cut-through */
+	MV_HP_FLAG_SOC		= (1 << 11),	/* SystemOnChip, no PCI */
 
 	/* Port private flags (pp_flags) */
 	MV_PP_FLAG_EDMA_EN	= (1 << 0),	/* is EDMA engine enabled? */
@@ -374,7 +377,7 @@
 #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
 #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
-#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
+#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
 
 #define WINDOW_CTRL(i)		(0x20030 + ((i) << 4))
 #define WINDOW_BASE(i)		(0x20034 + ((i) << 4))
@@ -652,7 +655,7 @@
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_soc */
-		.flags		= MV_GENIIE_FLAGS | MV_FLAG_SOC,
+		.flags		= MV_GENIIE_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
@@ -812,12 +815,7 @@
 	writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
 	writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
 		 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
-	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
-		writelfl((pp->crqb_dma & 0xffffffff) | index,
-			 port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
-	else
-		writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+	writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
 
 	/*
 	 * initialize response queue
@@ -827,13 +825,7 @@
 
 	WARN_ON(pp->crpb_dma & 0xff);
 	writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
-	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
-		writelfl((pp->crpb_dma & 0xffffffff) | index,
-			 port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-	else
-		writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
+	writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
 	writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
 		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 }
@@ -1254,7 +1246,7 @@
 
 		cfg |= (1 << 23);	/* do not mask PM field in rx'd FIS */
 		cfg |= (1 << 22);	/* enab 4-entry host queue cache */
-		if (HAS_PCI(ap->host))
+		if (!IS_SOC(hpriv))
 			cfg |= (1 << 18);	/* enab early completion */
 		if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
 			cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
@@ -2225,7 +2217,7 @@
 	 * a bogus register value which can indicate HW removal or PCI fault.
 	 */
 	if (pending_irqs && main_irq_cause != 0xffffffffU) {
-		if (unlikely((pending_irqs & PCI_ERR) && HAS_PCI(host)))
+		if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
 			handled = mv_pci_error(host, hpriv->base);
 		else
 			handled = mv_host_intr(host, pending_irqs);
@@ -2547,7 +2539,7 @@
 		hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
 	int fix_phy_mode4 =
 		hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
-	u32 m2, tmp;
+	u32 m2, m3;
 
 	if (fix_phy_mode2) {
 		m2 = readl(port_mmio + PHY_MODE2);
@@ -2564,28 +2556,36 @@
 		udelay(200);
 	}
 
-	/* who knows what this magic does */
-	tmp = readl(port_mmio + PHY_MODE3);
-	tmp &= ~0x7F800000;
-	tmp |= 0x2A800000;
-	writel(tmp, port_mmio + PHY_MODE3);
+	/*
+	 * Gen-II/IIe PHY_MODE3 errata RM#2:
+	 * Achieves better receiver noise performance than the h/w default:
+	 */
+	m3 = readl(port_mmio + PHY_MODE3);
+	m3 = (m3 & 0x1f) | (0x5555601 << 5);
+
+	/* Guideline 88F5182 (GL# SATA-S11) */
+	if (IS_SOC(hpriv))
+		m3 &= ~0x1c;
 
 	if (fix_phy_mode4) {
-		u32 m4;
-
-		m4 = readl(port_mmio + PHY_MODE4);
-
-		if (hp_flags & MV_HP_ERRATA_60X1B2)
-			tmp = readl(port_mmio + PHY_MODE3);
-
-		/* workaround for errata FEr SATA#10 (part 1) */
-		m4 = (m4 & ~(1 << 1)) | (1 << 0);
-
+		u32 m4 = readl(port_mmio + PHY_MODE4);
+		/*
+		 * Enforce reserved-bit restrictions on GenIIe devices only.
+		 * For earlier chipsets, force only the internal config field
+		 *  (workaround for errata FEr SATA#10 part 1).
+		 */
+		if (IS_GEN_IIE(hpriv))
+			m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+		else
+			m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
 		writel(m4, port_mmio + PHY_MODE4);
-
-		if (hp_flags & MV_HP_ERRATA_60X1B2)
-			writel(tmp, port_mmio + PHY_MODE3);
 	}
+	/*
+	 * Workaround for 60x1-B2 errata SATA#13:
+	 * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
+	 * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+	 */
+	writel(m3, port_mmio + PHY_MODE3);
 
 	/* Revert values of pre-emphasis and signal amps to the saved ones */
 	m2 = readl(port_mmio + PHY_MODE2);
@@ -2876,7 +2876,7 @@
 	void __iomem *mmio = hpriv->base;
 	u32 reg;
 
-	if (!HAS_PCI(host) || !IS_PCIE(hpriv))
+	if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
 		return 0;	/* not PCI-X capable */
 	reg = readl(mmio + MV_PCI_MODE_OFS);
 	if ((reg & MV_PCI_MODE_MASK) == 0)
@@ -3003,10 +3003,7 @@
 			hp_flags |= MV_HP_CUT_THROUGH;
 
 		switch (pdev->revision) {
-		case 0x0:
-			hp_flags |= MV_HP_ERRATA_XX42A0;
-			break;
-		case 0x1:
+		case 0x2: /* Rev.B0: the first/only public release */
 			hp_flags |= MV_HP_ERRATA_60X1C0;
 			break;
 		default:
@@ -3018,7 +3015,7 @@
 		break;
 	case chip_soc:
 		hpriv->ops = &mv_soc_ops;
-		hp_flags |= MV_HP_ERRATA_60X1C0;
+		hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
 		break;
 
 	default:
@@ -3062,12 +3059,12 @@
 	if (rc)
 		goto done;
 
-	if (HAS_PCI(host)) {
-		hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
-		hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
-	} else {
+	if (IS_SOC(hpriv)) {
 		hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
 		hpriv->main_irq_mask_addr  = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+	} else {
+		hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
+		hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
 	}
 
 	/* global interrupt mask: 0 == mask everything */
@@ -3093,7 +3090,7 @@
 		mv_port_init(&ap->ioaddr, port_mmio);
 
 #ifdef CONFIG_PCI
-		if (HAS_PCI(host)) {
+		if (!IS_SOC(hpriv)) {
 			unsigned int offset = port_mmio - mmio;
 			ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
 			ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
@@ -3113,7 +3110,7 @@
 		writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
 	}
 
-	if (HAS_PCI(host)) {
+	if (!IS_SOC(hpriv)) {
 		/* Clear any currently outstanding host interrupt conditions */
 		writelfl(0, mmio + hpriv->irq_cause_ofs);
 
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 72eccae..422cfca 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -760,6 +760,21 @@
 }
 
 /**
+ * dev_set_name - set a device name
+ * @dev: device
+ */
+int dev_set_name(struct device *dev, const char *fmt, ...)
+{
+	va_list vargs;
+
+	va_start(vargs, fmt);
+	vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
+	va_end(vargs);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_set_name);
+
+/**
  * device_add - add device to device hierarchy.
  * @dev: device.
  *
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index a196ef7..24b97b0 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -397,6 +397,7 @@
 MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
+MODULE_ALIAS("rd");
 
 #ifndef MODULE
 /* Legacy boot options - nonmodular */
@@ -447,6 +448,7 @@
 	disk->fops		= &brd_fops;
 	disk->private_data	= brd;
 	disk->queue		= brd->brd_queue;
+	disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
 	sprintf(disk->disk_name, "ram%d", i);
 	set_capacity(disk, rd_size * 2);
 
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index ebfe038..f1c8feb 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -3,7 +3,7 @@
  *  Authors: Dave Boutcher <boutcher@us.ibm.com>
  *           Ryan Arnold <ryanarn@us.ibm.com>
  *           Colin Devilbiss <devilbis@us.ibm.com>
- *           Stephen Rothwell <sfr@au1.ibm.com>
+ *           Stephen Rothwell
  *
  * (C) Copyright 2000-2004 IBM Corporation
  *
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 84e064f..dd7ea20 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -260,6 +260,10 @@
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
 		blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
 
+	/* If disk is read-only in the host, the guest should obey */
+	if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
+		set_disk_ro(vblk->disk, 1);
+
 	/* Host must always specify the capacity. */
 	vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
 			  &cap, sizeof(cap));
@@ -311,6 +315,7 @@
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
+	del_gendisk(vblk->disk);
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	mempool_destroy(vblk->pool);
@@ -325,7 +330,7 @@
 
 static unsigned int features[] = {
 	VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
-	VIRTIO_BLK_F_GEOMETRY,
+	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO,
 };
 
 static struct virtio_driver virtio_blk = {
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 5245a4a..9d0dfe6 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -6,7 +6,7 @@
  *  Authors: Dave Boutcher <boutcher@us.ibm.com>
  *           Ryan Arnold <ryanarn@us.ibm.com>
  *           Colin Devilbiss <devilbis@us.ibm.com>
- *           Stephen Rothwell <sfr@au1.ibm.com>
+ *           Stephen Rothwell
  *
  * (C) Copyright 2000-2004 IBM Corporation
  *
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 595a925..d307bf2 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -118,8 +118,8 @@
 	  order to become a dial-in server. If you have a card like that, say
 	  Y here and read <file:Documentation/computone.txt>.
 
-	  To compile this driver as modules, choose M here: the
-	  modules will be called ip2 and ip2main.
+	  To compile this driver as module, choose M here: the
+	  module will be called ip2.
 
 config ROCKETPORT
 	tristate "Comtrol RocketPort support"
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index 9a32169..af211a0 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -34,8 +34,6 @@
 	struct drm_minor *drm_minor = to_drm_minor(dev);
 	struct drm_device *drm_dev = drm_minor->dev;
 
-	printk(KERN_ERR "%s\n", __func__);
-
 	if (drm_dev->driver->suspend)
 		return drm_dev->driver->suspend(drm_dev, state);
 
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 8d6c208..efd0b4d 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -112,3 +112,12 @@
 
 	  If unsure, say Y.
 
+config HW_RANDOM_VIRTIO
+	tristate "VirtIO Random Number Generator support"
+	depends on HW_RANDOM && VIRTIO
+	---help---
+	  This driver provides kernel-side support for the virtual Random Number
+	  Generator hardware.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called virtio-rng.  If unsure, say N.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index c8b7300..b4940dd 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -11,3 +11,4 @@
 obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
new file mode 100644
index 0000000..d0e563e
--- /dev/null
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -0,0 +1,155 @@
+/*
+ * Randomness driver for virtio
+ *  Copyright (C) 2007, 2008 Rusty Russell IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_rng.h>
+
+/* The host will fill any buffer we give it with sweet, sweet randomness.  We
+ * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a
+ * time. */
+#define RANDOM_DATA_SIZE 64
+
+static struct virtqueue *vq;
+static u32 *random_data;
+static unsigned int data_left;
+static DECLARE_COMPLETION(have_data);
+
+static void random_recv_done(struct virtqueue *vq)
+{
+	int len;
+
+	/* We never get spurious callbacks. */
+	if (!vq->vq_ops->get_buf(vq, &len))
+		BUG();
+
+	data_left = len / sizeof(random_data[0]);
+	complete(&have_data);
+}
+
+static void register_buffer(void)
+{
+	struct scatterlist sg;
+
+	sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+	/* There should always be room for one buffer. */
+	if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
+		BUG();
+	vq->vq_ops->kick(vq);
+}
+
+/* At least we don't udelay() in a loop like some other drivers. */
+static int virtio_data_present(struct hwrng *rng, int wait)
+{
+	if (data_left)
+		return 1;
+
+	if (!wait)
+		return 0;
+
+	wait_for_completion(&have_data);
+	return 1;
+}
+
+/* virtio_data_present() must have succeeded before this is called. */
+static int virtio_data_read(struct hwrng *rng, u32 *data)
+{
+	BUG_ON(!data_left);
+
+	*data = random_data[--data_left];
+
+	if (!data_left) {
+		init_completion(&have_data);
+		register_buffer();
+	}
+	return sizeof(*data);
+}
+
+static struct hwrng virtio_hwrng = {
+	.name = "virtio",
+	.data_present = virtio_data_present,
+	.data_read = virtio_data_read,
+};
+
+static int virtrng_probe(struct virtio_device *vdev)
+{
+	int err;
+
+	/* We expect a single virtqueue. */
+	vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+	if (IS_ERR(vq))
+		return PTR_ERR(vq);
+
+	err = hwrng_register(&virtio_hwrng);
+	if (err) {
+		vdev->config->del_vq(vq);
+		return err;
+	}
+
+	register_buffer();
+	return 0;
+}
+
+static void virtrng_remove(struct virtio_device *vdev)
+{
+	vdev->config->reset(vdev);
+	hwrng_unregister(&virtio_hwrng);
+	vdev->config->del_vq(vq);
+}
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+static struct virtio_driver virtio_rng = {
+	.driver.name =	KBUILD_MODNAME,
+	.driver.owner =	THIS_MODULE,
+	.id_table =	id_table,
+	.probe =	virtrng_probe,
+	.remove =	__devexit_p(virtrng_remove),
+};
+
+static int __init init(void)
+{
+	int err;
+
+	random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL);
+	if (!random_data)
+		return -ENOMEM;
+
+	err = register_virtio_driver(&virtio_rng);
+	if (err)
+		kfree(random_data);
+	return err;
+}
+
+static void __exit fini(void)
+{
+	kfree(random_data);
+	unregister_virtio_driver(&virtio_rng);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio random number driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
index 6bfe254..939618f 100644
--- a/drivers/char/ip2/Makefile
+++ b/drivers/char/ip2/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Computone IntelliPort Plus Driver
 #
 
-obj-$(CONFIG_COMPUTONE)         += ip2.o ip2main.o
+obj-$(CONFIG_COMPUTONE)         += ip2.o
 
-ip2-objs			:= ip2base.o
+ip2-objs			:= ip2base.o ip2main.o
 
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 70957ac..c12cf8f 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -346,27 +346,6 @@
 }
 
 /******************************************************************************/
-/* Function:   init_module()                                                  */
-/* Parameters: None                                                           */
-/* Returns:    Success (0)                                                    */
-/*                                                                            */
-/* Description:                                                               */
-/* This is a required entry point for an installable module. It simply calls  */
-/* the driver initialisation function and returns what it returns.            */
-/******************************************************************************/
-#ifdef MODULE
-static int __init
-ip2_init_module(void)
-{
-#ifdef IP2DEBUG_INIT
-	printk (KERN_DEBUG "Loading module ...\n" );
-#endif
-    return 0;
-}
-module_init(ip2_init_module);
-#endif /* MODULE */
-
-/******************************************************************************/
 /* Function:   cleanup_module()                                               */
 /* Parameters: None                                                           */
 /* Returns:    Nothing                                                        */
@@ -779,8 +758,6 @@
 	return err;
 }
 
-EXPORT_SYMBOL(ip2_loadmain);
-
 /******************************************************************************/
 /* Function:   ip2_init_board()                                               */
 /* Parameters: Index of board in configuration structure                      */
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index fa9d3c9..ba6340a 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -251,10 +251,11 @@
 	int init_loops;
 	struct timer_list setup_timer;
 
+	/* Flag if hw is ready to send next packet */
 	int tx_ready;
-	struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
-	/* True if any packets are queued for transmission */
+	/* Count of pending packets to be sent */
 	int tx_queued;
+	struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
 
 	int rx_bytes_queued;
 	struct list_head rx_queue;
@@ -404,6 +405,8 @@
 
 	spin_lock_irqsave(&hw->spinlock, flags);
 
+	hw->tx_ready = 0;
+
 	if (hw->hw_version == HW_VERSION_1) {
 		outw((unsigned short) length, hw->base_port + IODWR);
 
@@ -492,6 +495,7 @@
 
 		spin_lock_irqsave(&hw->spinlock, flags);
 		list_add(&packet->queue, &hw->tx_queue[0]);
+		hw->tx_queued++;
 		spin_unlock_irqrestore(&hw->spinlock, flags);
 	} else {
 		if (packet->packet_callback)
@@ -949,12 +953,10 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&hw->spinlock, flags);
-	if (hw->tx_queued && hw->tx_ready != 0) {
+	if (hw->tx_queued && hw->tx_ready) {
 		int priority;
 		struct ipw_tx_packet *packet = NULL;
 
-		hw->tx_ready--;
-
 		/* Pick a packet */
 		for (priority = 0; priority < priority_limit; priority++) {
 			if (!list_empty(&hw->tx_queue[priority])) {
@@ -963,6 +965,7 @@
 						struct ipw_tx_packet,
 						queue);
 
+				hw->tx_queued--;
 				list_del(&packet->queue);
 
 				break;
@@ -973,6 +976,7 @@
 			spin_unlock_irqrestore(&hw->spinlock, flags);
 			return 0;
 		}
+
 		spin_unlock_irqrestore(&hw->spinlock, flags);
 
 		/* Send */
@@ -1063,7 +1067,7 @@
 		if (irqn & IR_TXINTR) {
 			ack |= IR_TXINTR;
 			spin_lock_irqsave(&hw->spinlock, flags);
-			hw->tx_ready++;
+			hw->tx_ready = 1;
 			spin_unlock_irqrestore(&hw->spinlock, flags);
 		}
 		/* Received data */
@@ -1170,7 +1174,7 @@
 	if (memrxdone & MEMRX_RX_DONE) {
 		writew(0, &hw->memory_info_regs->memreg_rx_done);
 		spin_lock_irqsave(&hw->spinlock, flags);
-		hw->tx_ready++;
+		hw->tx_ready = 1;
 		spin_unlock_irqrestore(&hw->spinlock, flags);
 		tx = 1;
 	}
@@ -1234,7 +1238,7 @@
 
 	spin_lock_irqsave(&hw->spinlock, flags);
 	list_add_tail(&packet->queue, &hw->tx_queue[priority]);
-	hw->tx_queued = 1;
+	hw->tx_queued++;
 	spin_unlock_irqrestore(&hw->spinlock, flags);
 
 	flush_packets_to_hw(hw);
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c
index 3d3e1c2..65fb848 100644
--- a/drivers/char/viocons.c
+++ b/drivers/char/viocons.c
@@ -7,7 +7,7 @@
  *  Authors: Dave Boutcher <boutcher@us.ibm.com>
  *           Ryan Arnold <ryanarn@us.ibm.com>
  *           Colin Devilbiss <devilbis@us.ibm.com>
- *           Stephen Rothwell <sfr@au1.ibm.com>
+ *           Stephen Rothwell
  *
  * (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation
  *
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index 58aad638..c39ddaf 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -6,7 +6,7 @@
  *  Authors: Dave Boutcher <boutcher@us.ibm.com>
  *           Ryan Arnold <ryanarn@us.ibm.com>
  *           Colin Devilbiss <devilbis@us.ibm.com>
- *           Stephen Rothwell <sfr@au1.ibm.com>
+ *           Stephen Rothwell
  *
  * (C) Copyright 2000-2004 IBM Corporation
  *
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index fa1ffbf..935f1c2 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -434,7 +434,7 @@
 	              vc->vc_blink, vc->vc_underline,
 	              vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic);
 	vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' ';
-	vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' ';
+	vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' ';
 }
 
 /* Note: inverting the screen twice should revert to the original state */
@@ -909,7 +909,7 @@
 
 	if (vc->vc_tty) {
 		struct winsize ws, *cws = &vc->vc_tty->winsize;
-		unsigned long flags;
+		struct pid *pgrp = NULL;
 
 		memset(&ws, 0, sizeof(ws));
 		ws.ws_row = vc->vc_rows;
@@ -917,11 +917,14 @@
 		ws.ws_ypixel = vc->vc_scan_lines;
 
 		mutex_lock(&vc->vc_tty->termios_mutex);
-		spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags);
-		if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) &&
-		    vc->vc_tty->pgrp)
+		spin_lock_irq(&vc->vc_tty->ctrl_lock);
+		if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
+			pgrp = get_pid(vc->vc_tty->pgrp);
+		spin_unlock_irq(&vc->vc_tty->ctrl_lock);
+		if (pgrp) {
 			kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
-		spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags);
+			put_pid(pgrp);
+		}
 		*cws = ws;
 		mutex_unlock(&vc->vc_tty->termios_mutex);
 	}
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7fce038..1d41496 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -412,7 +412,7 @@
 				int ret;
 
 				mutex_unlock(&cpufreq_governor_mutex);
-				ret = request_module(name);
+				ret = request_module("%s", name);
 				mutex_lock(&cpufreq_governor_mutex);
 
 				if (ret == 0)
@@ -625,7 +625,7 @@
 	unsigned int freq = 0;
 	unsigned int ret;
 
-	if (!policy->governor->store_setspeed)
+	if (!policy->governor || !policy->governor->store_setspeed)
 		return -EINVAL;
 
 	ret = sscanf(buf, "%u", &freq);
@@ -639,7 +639,7 @@
 
 static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
 {
-	if (!policy->governor->show_setspeed)
+	if (!policy->governor || !policy->governor->show_setspeed)
 		return sprintf(buf, "<unsupported>\n");
 
 	return policy->governor->show_setspeed(policy, buf);
@@ -928,13 +928,13 @@
 	policy->user_policy.policy = policy->policy;
 	policy->user_policy.governor = policy->governor;
 
-	unlock_policy_rwsem_write(cpu);
-
 	if (ret) {
 		dprintk("setting policy failed\n");
 		goto err_out_unregister;
 	}
 
+	unlock_policy_rwsem_write(cpu);
+
 	kobject_uevent(&policy->kobj, KOBJ_ADD);
 	module_put(cpufreq_driver->owner);
 	dprintk("initialization complete\n");
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index ae6cd60..b64c6bc 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -2,6 +2,11 @@
  * linux/drivers/cpufreq/freq_table.c
  *
  * Copyright (C) 2002 - 2003 Dominik Brodowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 065732d..d49361bf 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -20,7 +20,6 @@
 
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
-#include <asm/mpc85xx.h>
 #include "edac_module.h"
 #include "edac_core.h"
 #include "mpc85xx_edac.h"
@@ -43,8 +42,6 @@
 static u32 orig_l2_err_disable;
 static u32 orig_hid1;
 
-static const char *mpc85xx_ctl_name = "MPC85xx";
-
 /************************ MC SYSFS parts ***********************************/
 
 static ssize_t mpc85xx_mc_inject_data_hi_show(struct mem_ctl_info *mci,
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 74401198..9e4f59d 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -753,7 +753,7 @@
 
 	if (!edd_num_devices()) {
 		printk(KERN_INFO "EDD information not available.\n");
-		return 1;
+		return -ENODEV;
 	}
 
 	edd_kset = kset_create_and_add("edd", NULL, firmware_kobj);
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 7f138c6..beaf6b3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -127,7 +127,7 @@
 	unsigned long flags;
 	int i;
 
-	if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio))
+	if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio - 1))
 		return -EINVAL;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -170,7 +170,7 @@
 	unsigned	id;
 	int		base = chip->base;
 
-	if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio))
+	if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio - 1))
 			&& base >= 0) {
 		status = -EINVAL;
 		goto fail;
@@ -207,7 +207,7 @@
 	/* failures here can mean systems won't boot... */
 	if (status)
 		pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
-			chip->base, chip->base + chip->ngpio,
+			chip->base, chip->base + chip->ngpio - 1,
 			chip->label ? : "generic");
 	return status;
 }
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 7fb5b9d..7f92fdd 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -168,7 +168,7 @@
 {
 	struct mcp23s08	*mcp;
 	char		bank;
-	unsigned	t;
+	int		t;
 	unsigned	mask;
 
 	mcp = container_of(chip, struct mcp23s08, chip);
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 93f9167..7e40e8a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -30,6 +30,7 @@
 	{ "pca9537", 4, },
 	{ "pca9538", 8, },
 	{ "pca9539", 16, },
+	{ "pca9554", 8, },
 	{ "pca9555", 16, },
 	{ "pca9557", 8, },
 	/* REVISIT several pca955x parts should work here too */
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4dc76bc..00ff533 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -330,6 +330,20 @@
 	  sensor inside your CPU. Supported all are all known variants
 	  of Intel Core family.
 
+config SENSORS_IBMAEM
+	tristate "IBM Active Energy Manager temperature/power sensors and control"
+	select IPMI_SI
+	depends on IPMI_HANDLER
+	help
+	  If you say yes here you get support for the temperature and
+	  power sensors and capping hardware in various IBM System X
+	  servers that support Active Energy Manager.  This includes
+	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+	  and certain HS2x/LS2x/QS2x blades.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ibmaem.
+
 config SENSORS_IBMPEX
 	tristate "IBM PowerExecutive temperature/power sensors"
 	select IPMI_SI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3bdb05a..d098677 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -41,6 +41,7 @@
 obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
 obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
 obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
+obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
 obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index bab5fd2..26df06f 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -515,12 +515,14 @@
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
+	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"),
 	HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
 	HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
 	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
 	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 6ac5c6f..f9e2ed6 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -111,6 +111,7 @@
 	void __iomem *amb_mmio;
 	struct i5k_device_attribute *attrs;
 	unsigned int num_attrs;
+	unsigned long chipset_id;
 };
 
 static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
@@ -382,7 +383,8 @@
 	return res;
 }
 
-static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data)
+static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data,
+					    unsigned long devid)
 {
 	struct pci_dev *pcidev;
 	u32 val32;
@@ -390,7 +392,7 @@
 
 	/* Find AMB register memory space */
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
-				PCI_DEVICE_ID_INTEL_5000_ERR,
+				devid,
 				NULL);
 	if (!pcidev)
 		return -ENODEV;
@@ -409,6 +411,8 @@
 		goto out;
 	}
 
+	data->chipset_id = devid;
+
 	res = 0;
 out:
 	pci_dev_put(pcidev);
@@ -441,10 +445,30 @@
 	return res;
 }
 
+static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data,
+					unsigned long channel)
+{
+	switch (data->chipset_id) {
+	case PCI_DEVICE_ID_INTEL_5000_ERR:
+		return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel;
+	case PCI_DEVICE_ID_INTEL_5400_ERR:
+		return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel;
+	default:
+		BUG();
+	}
+}
+
+static unsigned long chipset_ids[] = {
+	PCI_DEVICE_ID_INTEL_5000_ERR,
+	PCI_DEVICE_ID_INTEL_5400_ERR,
+	0
+};
+
 static int __devinit i5k_amb_probe(struct platform_device *pdev)
 {
 	struct i5k_amb_data *data;
 	struct resource *reso;
+	int i;
 	int res = -ENODEV;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -452,19 +476,24 @@
 		return -ENOMEM;
 
 	/* Figure out where the AMB registers live */
-	res = i5k_find_amb_registers(data);
+	i = 0;
+	do {
+		res = i5k_find_amb_registers(data, chipset_ids[i]);
+		i++;
+	} while (res && chipset_ids[i]);
+
 	if (res)
 		goto err;
 
 	/* Copy the DIMM presence map for the first two channels */
 	res = i5k_channel_probe(&data->amb_present[0],
-				PCI_DEVICE_ID_INTEL_5000_FBD0);
+				i5k_channel_pci_id(data, 0));
 	if (res)
 		goto err;
 
 	/* Copy the DIMM presence map for the optional second two channels */
 	i5k_channel_probe(&data->amb_present[2],
-			  PCI_DEVICE_ID_INTEL_5000_FBD1);
+			  i5k_channel_pci_id(data, 1));
 
 	/* Set up resource regions */
 	reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
new file mode 100644
index 0000000..c9416e6
--- /dev/null
+++ b/drivers/hwmon/ibmaem.c
@@ -0,0 +1,1111 @@
+/*
+ * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
+ * and capping functionality.
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/ipmi.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/kdev_t.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/math64.h>
+#include <linux/time.h>
+
+#define REFRESH_INTERVAL	(HZ)
+#define IPMI_TIMEOUT		(30 * HZ)
+#define DRVNAME			"aem"
+
+#define AEM_NETFN		0x2E
+
+#define AEM_FIND_FW_CMD		0x80
+#define AEM_ELEMENT_CMD		0x81
+#define AEM_FW_INSTANCE_CMD	0x82
+
+#define AEM_READ_ELEMENT_CFG	0x80
+#define AEM_READ_BUFFER		0x81
+#define AEM_READ_REGISTER	0x82
+#define AEM_WRITE_REGISTER	0x83
+#define AEM_SET_REG_MASK	0x84
+#define AEM_CLEAR_REG_MASK	0x85
+#define AEM_READ_ELEMENT_CFG2	0x86
+
+#define AEM_CONTROL_ELEMENT	0
+#define AEM_ENERGY_ELEMENT	1
+#define AEM_CLOCK_ELEMENT	4
+#define AEM_POWER_CAP_ELEMENT	7
+#define AEM_EXHAUST_ELEMENT	9
+#define AEM_POWER_ELEMENT	10
+
+#define AEM_MODULE_TYPE_ID	0x0001
+
+#define AEM2_NUM_ENERGY_REGS	2
+#define AEM2_NUM_PCAP_REGS	6
+#define AEM2_NUM_TEMP_REGS	2
+#define AEM2_NUM_SENSORS	14
+
+#define AEM1_NUM_ENERGY_REGS	1
+#define AEM1_NUM_SENSORS	3
+
+/* AEM 2.x has more energy registers */
+#define AEM_NUM_ENERGY_REGS	AEM2_NUM_ENERGY_REGS
+/* AEM 2.x needs more sensor files */
+#define AEM_NUM_SENSORS		AEM2_NUM_SENSORS
+
+#define POWER_CAP		0
+#define POWER_CAP_MAX_HOTPLUG	1
+#define POWER_CAP_MAX		2
+#define	POWER_CAP_MIN_WARNING	3
+#define POWER_CAP_MIN		4
+#define	POWER_AUX		5
+
+#define AEM_DEFAULT_POWER_INTERVAL 1000
+#define AEM_MIN_POWER_INTERVAL	200
+#define UJ_PER_MJ		1000L
+
+static DEFINE_IDR(aem_idr);
+static DEFINE_SPINLOCK(aem_idr_lock);
+
+static struct device_driver aem_driver = {
+	.name = DRVNAME,
+	.bus = &platform_bus_type,
+};
+
+struct aem_ipmi_data {
+	struct completion	read_complete;
+	struct ipmi_addr	address;
+	ipmi_user_t		user;
+	int			interface;
+
+	struct kernel_ipmi_msg	tx_message;
+	long			tx_msgid;
+
+	void			*rx_msg_data;
+	unsigned short		rx_msg_len;
+	unsigned char		rx_result;
+	int			rx_recv_type;
+
+	struct device		*bmc_device;
+};
+
+struct aem_ro_sensor_template {
+	char *label;
+	ssize_t (*show)(struct device *dev,
+			struct device_attribute *devattr,
+			char *buf);
+	int index;
+};
+
+struct aem_rw_sensor_template {
+	char *label;
+	ssize_t (*show)(struct device *dev,
+			struct device_attribute *devattr,
+			char *buf);
+	ssize_t (*set)(struct device *dev,
+		       struct device_attribute *devattr,
+		       const char *buf, size_t count);
+	int index;
+};
+
+struct aem_data {
+	struct list_head	list;
+
+	struct device		*hwmon_dev;
+	struct platform_device	*pdev;
+	struct mutex		lock;
+	char			valid;
+	unsigned long		last_updated;	/* In jiffies */
+	u8			ver_major;
+	u8			ver_minor;
+	u8			module_handle;
+	int			id;
+	struct aem_ipmi_data	ipmi;
+
+	/* Function to update sensors */
+	void (*update)(struct aem_data *data);
+
+	/*
+	 * AEM 1.x sensors:
+	 * Available sensors:
+	 * Energy meter
+	 * Power meter
+	 *
+	 * AEM 2.x sensors:
+	 * Two energy meters
+	 * Two power meters
+	 * Two temperature sensors
+	 * Six power cap registers
+	 */
+
+	/* sysfs attrs */
+	struct sensor_device_attribute	sensors[AEM_NUM_SENSORS];
+
+	/* energy use in mJ */
+	u64			energy[AEM_NUM_ENERGY_REGS];
+
+	/* power sampling interval in ms */
+	unsigned long		power_period[AEM_NUM_ENERGY_REGS];
+
+	/* Everything past here is for AEM2 only */
+
+	/* power caps in dW */
+	u16			pcap[AEM2_NUM_PCAP_REGS];
+
+	/* exhaust temperature in C */
+	u8			temp[AEM2_NUM_TEMP_REGS];
+};
+
+/* Data structures returned by the AEM firmware */
+struct aem_iana_id {
+	u8			bytes[3];
+};
+static struct aem_iana_id system_x_id = {
+	.bytes = {0x4D, 0x4F, 0x00}
+};
+
+/* These are used to find AEM1 instances */
+struct aem_find_firmware_req {
+	struct aem_iana_id	id;
+	u8			rsvd;
+	__be16			index;
+	__be16			module_type_id;
+} __packed;
+
+struct aem_find_firmware_resp {
+	struct aem_iana_id	id;
+	u8			num_instances;
+} __packed;
+
+/* These are used to find AEM2 instances */
+struct aem_find_instance_req {
+	struct aem_iana_id	id;
+	u8			instance_number;
+	__be16			module_type_id;
+} __packed;
+
+struct aem_find_instance_resp {
+	struct aem_iana_id	id;
+	u8			num_instances;
+	u8			major;
+	u8			minor;
+	u8			module_handle;
+	u16			record_id;
+} __packed;
+
+/* These are used to query sensors */
+struct aem_read_sensor_req {
+	struct aem_iana_id	id;
+	u8			module_handle;
+	u8			element;
+	u8			subcommand;
+	u8			reg;
+	u8			rx_buf_size;
+} __packed;
+
+struct aem_read_sensor_resp {
+	struct aem_iana_id	id;
+	u8			bytes[0];
+} __packed;
+
+/* Data structures to talk to the IPMI layer */
+struct aem_driver_data {
+	struct list_head	aem_devices;
+	struct ipmi_smi_watcher	bmc_events;
+	struct ipmi_user_hndl	ipmi_hndlrs;
+};
+
+static void aem_register_bmc(int iface, struct device *dev);
+static void aem_bmc_gone(int iface);
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
+
+static void aem_remove_sensors(struct aem_data *data);
+static int aem_init_aem1(struct aem_ipmi_data *probe);
+static int aem_init_aem2(struct aem_ipmi_data *probe);
+static int aem1_find_sensors(struct aem_data *data);
+static int aem2_find_sensors(struct aem_data *data);
+static void update_aem1_sensors(struct aem_data *data);
+static void update_aem2_sensors(struct aem_data *data);
+
+static struct aem_driver_data driver_data = {
+	.aem_devices = LIST_HEAD_INIT(driver_data.aem_devices),
+	.bmc_events = {
+		.owner = THIS_MODULE,
+		.new_smi = aem_register_bmc,
+		.smi_gone = aem_bmc_gone,
+	},
+	.ipmi_hndlrs = {
+		.ipmi_recv_hndl = aem_msg_handler,
+	},
+};
+
+/* Functions to talk to the IPMI layer */
+
+/* Initialize IPMI address, message buffers and user data */
+static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface,
+			      struct device *bmc)
+{
+	int err;
+
+	init_completion(&data->read_complete);
+	data->bmc_device = bmc;
+
+	/* Initialize IPMI address */
+	data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+	data->address.channel = IPMI_BMC_CHANNEL;
+	data->address.data[0] = 0;
+	data->interface = iface;
+
+	/* Initialize message buffers */
+	data->tx_msgid = 0;
+	data->tx_message.netfn = AEM_NETFN;
+
+	/* Create IPMI messaging interface user */
+	err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
+			       data, &data->user);
+	if (err < 0) {
+		dev_err(bmc, "Unable to register user with IPMI "
+			"interface %d\n", data->interface);
+		return -EACCES;
+	}
+
+	return 0;
+}
+
+/* Send an IPMI command */
+static int aem_send_message(struct aem_ipmi_data *data)
+{
+	int err;
+
+	err = ipmi_validate_addr(&data->address, sizeof(data->address));
+	if (err)
+		goto out;
+
+	data->tx_msgid++;
+	err = ipmi_request_settime(data->user, &data->address, data->tx_msgid,
+				   &data->tx_message, data, 0, 0, 0);
+	if (err)
+		goto out1;
+
+	return 0;
+out1:
+	dev_err(data->bmc_device, "request_settime=%x\n", err);
+	return err;
+out:
+	dev_err(data->bmc_device, "validate_addr=%x\n", err);
+	return err;
+}
+
+/* Dispatch IPMI messages to callers */
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data)
+{
+	unsigned short rx_len;
+	struct aem_ipmi_data *data = user_msg_data;
+
+	if (msg->msgid != data->tx_msgid) {
+		dev_err(data->bmc_device, "Mismatch between received msgid "
+			"(%02x) and transmitted msgid (%02x)!\n",
+			(int)msg->msgid,
+			(int)data->tx_msgid);
+		ipmi_free_recv_msg(msg);
+		return;
+	}
+
+	data->rx_recv_type = msg->recv_type;
+	if (msg->msg.data_len > 0)
+		data->rx_result = msg->msg.data[0];
+	else
+		data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE;
+
+	if (msg->msg.data_len > 1) {
+		rx_len = msg->msg.data_len - 1;
+		if (data->rx_msg_len < rx_len)
+			rx_len = data->rx_msg_len;
+		data->rx_msg_len = rx_len;
+		memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len);
+	} else
+		data->rx_msg_len = 0;
+
+	ipmi_free_recv_msg(msg);
+	complete(&data->read_complete);
+}
+
+/* ID functions */
+
+/* Obtain an id */
+static int aem_idr_get(int *id)
+{
+	int i, err;
+
+again:
+	if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL)))
+		return -ENOMEM;
+
+	spin_lock(&aem_idr_lock);
+	err = idr_get_new(&aem_idr, NULL, &i);
+	spin_unlock(&aem_idr_lock);
+
+	if (unlikely(err == -EAGAIN))
+		goto again;
+	else if (unlikely(err))
+		return err;
+
+	*id = i & MAX_ID_MASK;
+	return 0;
+}
+
+/* Release an object ID */
+static void aem_idr_put(int id)
+{
+	spin_lock(&aem_idr_lock);
+	idr_remove(&aem_idr, id);
+	spin_unlock(&aem_idr_lock);
+}
+
+/* Sensor support functions */
+
+/* Read a sensor value */
+static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
+			   void *buf, size_t size)
+{
+	int rs_size, res;
+	struct aem_read_sensor_req rs_req;
+	struct aem_read_sensor_resp *rs_resp;
+	struct aem_ipmi_data *ipmi = &data->ipmi;
+
+	/* AEM registers are 1, 2, 4 or 8 bytes */
+	switch (size) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	rs_req.id = system_x_id;
+	rs_req.module_handle = data->module_handle;
+	rs_req.element = elt;
+	rs_req.subcommand = AEM_READ_REGISTER;
+	rs_req.reg = reg;
+	rs_req.rx_buf_size = size;
+
+	ipmi->tx_message.cmd = AEM_ELEMENT_CMD;
+	ipmi->tx_message.data = (char *)&rs_req;
+	ipmi->tx_message.data_len = sizeof(rs_req);
+
+	rs_size = sizeof(*rs_resp) + size;
+	rs_resp = kzalloc(rs_size, GFP_KERNEL);
+	if (!rs_resp)
+		return -ENOMEM;
+
+	ipmi->rx_msg_data = rs_resp;
+	ipmi->rx_msg_len = rs_size;
+
+	aem_send_message(ipmi);
+
+	res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT);
+	if (!res)
+		return -ETIMEDOUT;
+
+	if (ipmi->rx_result || ipmi->rx_msg_len != rs_size ||
+	    memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) {
+		kfree(rs_resp);
+		return -ENOENT;
+	}
+
+	switch (size) {
+	case 1: {
+		u8 *x = buf;
+		*x = rs_resp->bytes[0];
+		break;
+	}
+	case 2: {
+		u16 *x = buf;
+		*x = be16_to_cpup((__be16 *)rs_resp->bytes);
+		break;
+	}
+	case 4: {
+		u32 *x = buf;
+		*x = be32_to_cpup((__be32 *)rs_resp->bytes);
+		break;
+	}
+	case 8: {
+		u64 *x = buf;
+		*x = be64_to_cpup((__be64 *)rs_resp->bytes);
+		break;
+	}
+	}
+
+	return 0;
+}
+
+/* Update AEM energy registers */
+static void update_aem_energy(struct aem_data *data)
+{
+	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+	if (data->ver_major < 2)
+		return;
+	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+}
+
+/* Update all AEM1 sensors */
+static void update_aem1_sensors(struct aem_data *data)
+{
+	mutex_lock(&data->lock);
+	if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+	    data->valid)
+		goto out;
+
+	update_aem_energy(data);
+out:
+	mutex_unlock(&data->lock);
+}
+
+/* Update all AEM2 sensors */
+static void update_aem2_sensors(struct aem_data *data)
+{
+	int i;
+
+	mutex_lock(&data->lock);
+	if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+	    data->valid)
+		goto out;
+
+	update_aem_energy(data);
+	aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1);
+	aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1);
+
+	for (i = POWER_CAP; i <= POWER_AUX; i++)
+		aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i,
+				&data->pcap[i], 2);
+out:
+	mutex_unlock(&data->lock);
+}
+
+/* Delete an AEM instance */
+static void aem_delete(struct aem_data *data)
+{
+	list_del(&data->list);
+	aem_remove_sensors(data);
+	hwmon_device_unregister(data->hwmon_dev);
+	ipmi_destroy_user(data->ipmi.user);
+	dev_set_drvdata(&data->pdev->dev, NULL);
+	platform_device_unregister(data->pdev);
+	aem_idr_put(data->id);
+	kfree(data);
+}
+
+/* Probe functions for AEM1 devices */
+
+/* Retrieve version and module handle for an AEM1 instance */
+static int aem_find_aem1_count(struct aem_ipmi_data *data)
+{
+	int res;
+	struct aem_find_firmware_req	ff_req;
+	struct aem_find_firmware_resp	ff_resp;
+
+	ff_req.id = system_x_id;
+	ff_req.index = 0;
+	ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+	data->tx_message.cmd = AEM_FIND_FW_CMD;
+	data->tx_message.data = (char *)&ff_req;
+	data->tx_message.data_len = sizeof(ff_req);
+
+	data->rx_msg_data = &ff_resp;
+	data->rx_msg_len = sizeof(ff_resp);
+
+	aem_send_message(data);
+
+	res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+	if (!res)
+		return -ETIMEDOUT;
+
+	if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) ||
+	    memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id)))
+		return -ENOENT;
+
+	return ff_resp.num_instances;
+}
+
+/* Find and initialize one AEM1 instance */
+static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
+{
+	struct aem_data *data;
+	int i;
+	int res = -ENOMEM;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return res;
+	mutex_init(&data->lock);
+
+	/* Copy instance data */
+	data->ver_major = 1;
+	data->ver_minor = 0;
+	data->module_handle = module_handle;
+	for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++)
+		data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+	/* Create sub-device for this fw instance */
+	if (aem_idr_get(&data->id))
+		goto id_err;
+
+	data->pdev = platform_device_alloc(DRVNAME, data->id);
+	if (!data->pdev)
+		goto dev_err;
+	data->pdev->dev.driver = &aem_driver;
+
+	res = platform_device_add(data->pdev);
+	if (res)
+		goto ipmi_err;
+
+	dev_set_drvdata(&data->pdev->dev, data);
+
+	/* Set up IPMI interface */
+	if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+			       probe->bmc_device))
+		goto ipmi_err;
+
+	/* Register with hwmon */
+	data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+	if (IS_ERR(data->hwmon_dev)) {
+		dev_err(&data->pdev->dev, "Unable to register hwmon "
+			"device for IPMI interface %d\n",
+			probe->interface);
+		goto hwmon_reg_err;
+	}
+
+	data->update = update_aem1_sensors;
+
+	/* Find sensors */
+	if (aem1_find_sensors(data))
+		goto sensor_err;
+
+	/* Add to our list of AEM devices */
+	list_add_tail(&data->list, &driver_data.aem_devices);
+
+	dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+		 data->ver_major, data->ver_minor,
+		 data->module_handle);
+	return 0;
+
+sensor_err:
+	hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+	ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+	dev_set_drvdata(&data->pdev->dev, NULL);
+	platform_device_unregister(data->pdev);
+dev_err:
+	aem_idr_put(data->id);
+id_err:
+	kfree(data);
+
+	return res;
+}
+
+/* Find and initialize all AEM1 instances */
+static int aem_init_aem1(struct aem_ipmi_data *probe)
+{
+	int num, i, err;
+
+	num = aem_find_aem1_count(probe);
+	for (i = 0; i < num; i++) {
+		err = aem_init_aem1_inst(probe, i);
+		if (err) {
+			dev_err(probe->bmc_device,
+				"Error %d initializing AEM1 0x%X\n",
+				err, i);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+/* Probe functions for AEM2 devices */
+
+/* Retrieve version and module handle for an AEM2 instance */
+static int aem_find_aem2(struct aem_ipmi_data *data,
+			    struct aem_find_instance_resp *fi_resp,
+			    int instance_num)
+{
+	int res;
+	struct aem_find_instance_req fi_req;
+
+	fi_req.id = system_x_id;
+	fi_req.instance_number = instance_num;
+	fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+	data->tx_message.cmd = AEM_FW_INSTANCE_CMD;
+	data->tx_message.data = (char *)&fi_req;
+	data->tx_message.data_len = sizeof(fi_req);
+
+	data->rx_msg_data = fi_resp;
+	data->rx_msg_len = sizeof(*fi_resp);
+
+	aem_send_message(data);
+
+	res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+	if (!res)
+		return -ETIMEDOUT;
+
+	if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
+	    memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+		return -ENOENT;
+
+	return 0;
+}
+
+/* Find and initialize one AEM2 instance */
+static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
+			      struct aem_find_instance_resp *fi_resp)
+{
+	struct aem_data *data;
+	int i;
+	int res = -ENOMEM;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return res;
+	mutex_init(&data->lock);
+
+	/* Copy instance data */
+	data->ver_major = fi_resp->major;
+	data->ver_minor = fi_resp->minor;
+	data->module_handle = fi_resp->module_handle;
+	for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++)
+		data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+	/* Create sub-device for this fw instance */
+	if (aem_idr_get(&data->id))
+		goto id_err;
+
+	data->pdev = platform_device_alloc(DRVNAME, data->id);
+	if (!data->pdev)
+		goto dev_err;
+	data->pdev->dev.driver = &aem_driver;
+
+	res = platform_device_add(data->pdev);
+	if (res)
+		goto ipmi_err;
+
+	dev_set_drvdata(&data->pdev->dev, data);
+
+	/* Set up IPMI interface */
+	if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+			       probe->bmc_device))
+		goto ipmi_err;
+
+	/* Register with hwmon */
+	data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+	if (IS_ERR(data->hwmon_dev)) {
+		dev_err(&data->pdev->dev, "Unable to register hwmon "
+			"device for IPMI interface %d\n",
+			probe->interface);
+		goto hwmon_reg_err;
+	}
+
+	data->update = update_aem2_sensors;
+
+	/* Find sensors */
+	if (aem2_find_sensors(data))
+		goto sensor_err;
+
+	/* Add to our list of AEM devices */
+	list_add_tail(&data->list, &driver_data.aem_devices);
+
+	dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+		 data->ver_major, data->ver_minor,
+		 data->module_handle);
+	return 0;
+
+sensor_err:
+	hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+	ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+	dev_set_drvdata(&data->pdev->dev, NULL);
+	platform_device_unregister(data->pdev);
+dev_err:
+	aem_idr_put(data->id);
+id_err:
+	kfree(data);
+
+	return res;
+}
+
+/* Find and initialize all AEM2 instances */
+static int aem_init_aem2(struct aem_ipmi_data *probe)
+{
+	struct aem_find_instance_resp fi_resp;
+	int err;
+	int i = 0;
+
+	while (!aem_find_aem2(probe, &fi_resp, i)) {
+		if (fi_resp.major != 2) {
+			dev_err(probe->bmc_device, "Unknown AEM v%d; please "
+				"report this to the maintainer.\n",
+				fi_resp.major);
+			i++;
+			continue;
+		}
+		err = aem_init_aem2_inst(probe, &fi_resp);
+		if (err) {
+			dev_err(probe->bmc_device,
+				"Error %d initializing AEM2 0x%X\n",
+				err, fi_resp.module_handle);
+			return err;
+		}
+		i++;
+	}
+
+	return 0;
+}
+
+/* Probe a BMC for AEM firmware instances */
+static void aem_register_bmc(int iface, struct device *dev)
+{
+	struct aem_ipmi_data probe;
+
+	if (aem_init_ipmi_data(&probe, iface, dev))
+		return;
+
+	/* Ignore probe errors; they won't cause problems */
+	aem_init_aem1(&probe);
+	aem_init_aem2(&probe);
+
+	ipmi_destroy_user(probe.user);
+}
+
+/* Handle BMC deletion */
+static void aem_bmc_gone(int iface)
+{
+	struct aem_data *p1, *next1;
+
+	list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+		if (p1->ipmi.interface == iface)
+			aem_delete(p1);
+}
+
+/* sysfs support functions */
+
+/* AEM device name */
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct aem_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major);
+}
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+/* AEM device version */
+static ssize_t show_version(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct aem_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor);
+}
+static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0);
+
+/* Display power use */
+static ssize_t aem_show_power(struct device *dev,
+			      struct device_attribute *devattr,
+			      char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct aem_data *data = dev_get_drvdata(dev);
+	u64 before, after, delta, time;
+	signed long leftover;
+	struct timespec b, a;
+
+	mutex_lock(&data->lock);
+	update_aem_energy(data);
+	getnstimeofday(&b);
+	before = data->energy[attr->index];
+
+	leftover = schedule_timeout_interruptible(
+			msecs_to_jiffies(data->power_period[attr->index])
+		   );
+	if (leftover) {
+		mutex_unlock(&data->lock);
+		return 0;
+	}
+
+	update_aem_energy(data);
+	getnstimeofday(&a);
+	after = data->energy[attr->index];
+	mutex_unlock(&data->lock);
+
+	time = timespec_to_ns(&a) - timespec_to_ns(&b);
+	delta = (after - before) * UJ_PER_MJ;
+
+	return sprintf(buf, "%llu\n",
+		(unsigned long long)div64_u64(delta * NSEC_PER_SEC, time));
+}
+
+/* Display energy use */
+static ssize_t aem_show_energy(struct device *dev,
+			       struct device_attribute *devattr,
+			       char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct aem_data *a = dev_get_drvdata(dev);
+	a->update(a);
+
+	return sprintf(buf, "%llu\n",
+			(unsigned long long)a->energy[attr->index] * 1000);
+}
+
+/* Display power interval registers */
+static ssize_t aem_show_power_period(struct device *dev,
+				     struct device_attribute *devattr,
+				     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct aem_data *a = dev_get_drvdata(dev);
+	a->update(a);
+
+	return sprintf(buf, "%lu\n", a->power_period[attr->index]);
+}
+
+/* Set power interval registers */
+static ssize_t aem_set_power_period(struct device *dev,
+				    struct device_attribute *devattr,
+				    const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct aem_data *a = dev_get_drvdata(dev);
+	unsigned long temp;
+	int res;
+
+	res = strict_strtoul(buf, 10, &temp);
+	if (res)
+		return res;
+
+	if (temp < AEM_MIN_POWER_INTERVAL)
+		return -EINVAL;
+
+	mutex_lock(&a->lock);
+	a->power_period[attr->index] = temp;
+	mutex_unlock(&a->lock);
+
+	return count;
+}
+
+/* Discover sensors on an AEM device */
+static int aem_register_sensors(struct aem_data *data,
+				struct aem_ro_sensor_template *ro,
+				struct aem_rw_sensor_template *rw)
+{
+	struct device *dev = &data->pdev->dev;
+	struct sensor_device_attribute *sensors = data->sensors;
+	int err;
+
+	/* Set up read-only sensors */
+	while (ro->label) {
+		sensors->dev_attr.attr.name = ro->label;
+		sensors->dev_attr.attr.mode = S_IRUGO;
+		sensors->dev_attr.show = ro->show;
+		sensors->index = ro->index;
+
+		err = device_create_file(dev, &sensors->dev_attr);
+		if (err) {
+			sensors->dev_attr.attr.name = NULL;
+			goto error;
+		}
+		sensors++;
+		ro++;
+	}
+
+	/* Set up read-write sensors */
+	while (rw->label) {
+		sensors->dev_attr.attr.name = rw->label;
+		sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
+		sensors->dev_attr.show = rw->show;
+		sensors->dev_attr.store = rw->set;
+		sensors->index = rw->index;
+
+		err = device_create_file(dev, &sensors->dev_attr);
+		if (err) {
+			sensors->dev_attr.attr.name = NULL;
+			goto error;
+		}
+		sensors++;
+		rw++;
+	}
+
+	err = device_create_file(dev, &sensor_dev_attr_name.dev_attr);
+	if (err)
+		goto error;
+	err = device_create_file(dev, &sensor_dev_attr_version.dev_attr);
+	return err;
+
+error:
+	aem_remove_sensors(data);
+	return err;
+}
+
+/* sysfs support functions for AEM2 sensors */
+
+/* Display temperature use */
+static ssize_t aem2_show_temp(struct device *dev,
+			      struct device_attribute *devattr,
+			      char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct aem_data *a = dev_get_drvdata(dev);
+	a->update(a);
+
+	return sprintf(buf, "%u\n", a->temp[attr->index] * 1000);
+}
+
+/* Display power-capping registers */
+static ssize_t aem2_show_pcap_value(struct device *dev,
+				    struct device_attribute *devattr,
+				    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct aem_data *a = dev_get_drvdata(dev);
+	a->update(a);
+
+	return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000);
+}
+
+/* Remove sensors attached to an AEM device */
+static void aem_remove_sensors(struct aem_data *data)
+{
+	int i;
+
+	for (i = 0; i < AEM_NUM_SENSORS; i++) {
+		if (!data->sensors[i].dev_attr.attr.name)
+			continue;
+		device_remove_file(&data->pdev->dev,
+				   &data->sensors[i].dev_attr);
+	}
+
+	device_remove_file(&data->pdev->dev,
+			   &sensor_dev_attr_name.dev_attr);
+	device_remove_file(&data->pdev->dev,
+			   &sensor_dev_attr_version.dev_attr);
+}
+
+/* Sensor probe functions */
+
+/* Description of AEM1 sensors */
+static struct aem_ro_sensor_template aem1_ro_sensors[] = {
+{"energy1_input",  aem_show_energy, 0},
+{"power1_average", aem_show_power,  0},
+{NULL,		   NULL,	    0},
+};
+
+static struct aem_rw_sensor_template aem1_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{NULL,			    NULL,                  NULL,                 0},
+};
+
+/* Description of AEM2 sensors */
+static struct aem_ro_sensor_template aem2_ro_sensors[] = {
+{"energy1_input",	  aem_show_energy,	0},
+{"energy2_input",	  aem_show_energy,	1},
+{"power1_average",	  aem_show_power,	0},
+{"power2_average",	  aem_show_power,	1},
+{"temp1_input",		  aem2_show_temp,	0},
+{"temp2_input",		  aem2_show_temp,	1},
+
+{"power4_average",	  aem2_show_pcap_value,	POWER_CAP_MAX_HOTPLUG},
+{"power5_average",	  aem2_show_pcap_value,	POWER_CAP_MAX},
+{"power6_average",	  aem2_show_pcap_value,	POWER_CAP_MIN_WARNING},
+{"power7_average",	  aem2_show_pcap_value,	POWER_CAP_MIN},
+
+{"power3_average", 	  aem2_show_pcap_value,	POWER_AUX},
+{"power_cap",		  aem2_show_pcap_value,	POWER_CAP},
+{NULL,                    NULL,                 0},
+};
+
+static struct aem_rw_sensor_template aem2_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1},
+{NULL,			    NULL,                  NULL,                 0},
+};
+
+/* Set up AEM1 sensor attrs */
+static int aem1_find_sensors(struct aem_data *data)
+{
+	return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors);
+}
+
+/* Set up AEM2 sensor attrs */
+static int aem2_find_sensors(struct aem_data *data)
+{
+	return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors);
+}
+
+/* Module init/exit routines */
+
+static int __init aem_init(void)
+{
+	int res;
+
+	res = driver_register(&aem_driver);
+	if (res) {
+		printk(KERN_ERR "Can't register aem driver\n");
+		return res;
+	}
+
+	res = ipmi_smi_watcher_register(&driver_data.bmc_events);
+	if (res)
+		goto ipmi_reg_err;
+	return 0;
+
+ipmi_reg_err:
+	driver_unregister(&aem_driver);
+	return res;
+
+}
+
+static void __exit aem_exit(void)
+{
+	struct aem_data *p1, *next1;
+
+	ipmi_smi_watcher_unregister(&driver_data.bmc_events);
+	driver_unregister(&aem_driver);
+	list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+		aem_delete(p1);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(aem_init);
+module_exit(aem_exit);
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index fbe16d5..1adf2ef 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -747,7 +747,9 @@
 		break;
 	case IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED:
 		kmem_cache_free(ib_mad_cache, mad_priv);
-		break;
+		kfree(local);
+		ret = 1;
+		goto out;
 	case IB_MAD_RESULT_SUCCESS:
 		/* Treat like an incoming receive MAD */
 		port_priv = ib_get_mad_port(mad_agent_priv->agent.device,
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index fe78f7d..a1768db 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -150,7 +150,7 @@
 	ret = 0;
 	while (npages) {
 		ret = get_user_pages(current, current->mm, cur_base,
-				     min_t(int, npages,
+				     min_t(unsigned long, npages,
 					   PAGE_SIZE / sizeof (struct page *)),
 				     1, !umem->writable, page_list, vma_list);
 
diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c
index 9a054c6..b1441aeb 100644
--- a/drivers/infiniband/hw/amso1100/c2_rnic.c
+++ b/drivers/infiniband/hw/amso1100/c2_rnic.c
@@ -455,8 +455,7 @@
 	     IB_DEVICE_CURR_QP_STATE_MOD |
 	     IB_DEVICE_SYS_IMAGE_GUID |
 	     IB_DEVICE_ZERO_STAG |
-	     IB_DEVICE_MEM_WINDOW |
-	     IB_DEVICE_SEND_W_INV);
+	     IB_DEVICE_MEM_WINDOW);
 
 	/* Allocate the qptr_array */
 	c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *));
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 79dbe5b..9926137 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -229,7 +229,7 @@
 		      struct ib_send_wr **bad_wr)
 {
 	int err = 0;
-	u8 t3_wr_flit_cnt;
+	u8 uninitialized_var(t3_wr_flit_cnt);
 	enum t3_wr_opcode t3_wr_opcode = 0;
 	enum t3_wr_flags t3_wr_flags;
 	struct iwch_qp *qhp;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index bbe0436..f093b00 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -421,8 +421,10 @@
 	int ret = 0;
 	unsigned long flags;
 
-	if (unlikely(my_qp->state != IB_QPS_RTS)) {
-		ehca_err(qp->device, "QP not in RTS state  qpn=%x", qp->qp_num);
+	/* Reject WR if QP is in RESET, INIT or RTR state */
+	if (unlikely(my_qp->state < IB_QPS_RTS)) {
+		ehca_err(qp->device, "Invalid QP state  qp_state=%d qpn=%x",
+			 my_qp->state, qp->qp_num);
 		return -EINVAL;
 	}
 
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 59a8b25..0bd8bcb 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -232,6 +232,11 @@
 #define IPATH_SDMA_TXREQ_S_ABORTED   2
 #define IPATH_SDMA_TXREQ_S_SHUTDOWN  3
 
+#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG	(1ull << 63)
+#define IPATH_SDMA_STATUS_ABORT_IN_PROG			(1ull << 62)
+#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE		(1ull << 61)
+#define IPATH_SDMA_STATUS_SCB_EMPTY			(1ull << 30)
+
 /* max dwords in small buffer packet */
 #define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
 
diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c
index 1ff46ae..5f9315d 100644
--- a/drivers/infiniband/hw/ipath/ipath_mad.c
+++ b/drivers/infiniband/hw/ipath/ipath_mad.c
@@ -1492,6 +1492,10 @@
 			goto bail;
 		}
 
+	case IB_MGMT_METHOD_TRAP:
+	case IB_MGMT_METHOD_REPORT:
+	case IB_MGMT_METHOD_REPORT_RESP:
+	case IB_MGMT_METHOD_TRAP_REPRESS:
 	case IB_MGMT_METHOD_GET_RESP:
 		/*
 		 * The ib_mad module will call us to process responses
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index 3697449..eaba032 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -263,14 +263,10 @@
 		hwstatus = ipath_read_kreg64(dd,
 				dd->ipath_kregs->kr_senddmastatus);
 
-		if (/* ScoreBoardDrainInProg */
-		    test_bit(63, &hwstatus) ||
-		    /* AbortInProg */
-		    test_bit(62, &hwstatus) ||
-		    /* InternalSDmaEnable */
-		    test_bit(61, &hwstatus) ||
-		    /* ScbEmpty */
-		    !test_bit(30, &hwstatus)) {
+		if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG |
+				 IPATH_SDMA_STATUS_ABORT_IN_PROG	     |
+				 IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) ||
+		    !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) {
 			if (dd->ipath_sdma_reset_wait > 0) {
 				/* not done shutting down sdma */
 				--dd->ipath_sdma_reset_wait;
@@ -345,7 +341,7 @@
 	 * state change
 	 */
 	if (jiffies > dd->ipath_sdma_abort_jiffies) {
-		ipath_dbg("looping with status 0x%016llx\n",
+		ipath_dbg("looping with status 0x%08lx\n",
 			  dd->ipath_sdma_status);
 		dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
 	}
@@ -615,7 +611,7 @@
 	}
 	spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
 	if (!needed) {
-		ipath_dbg("invalid attempt to restart SDMA, status 0x%016llx\n",
+		ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n",
 			dd->ipath_sdma_status);
 		goto bail;
 	}
diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c
index 7fd18e8..0596ec1 100644
--- a/drivers/infiniband/hw/ipath/ipath_uc.c
+++ b/drivers/infiniband/hw/ipath/ipath_uc.c
@@ -407,12 +407,11 @@
 			dev->n_pkt_drops++;
 			goto done;
 		}
-		/* XXX Need to free SGEs */
+		wc.opcode = IB_WC_RECV;
 	last_imm:
 		ipath_copy_sge(&qp->r_sge, data, tlen);
 		wc.wr_id = qp->r_wr_id;
 		wc.status = IB_WC_SUCCESS;
-		wc.opcode = IB_WC_RECV;
 		wc.qp = &qp->ibqp;
 		wc.src_qp = qp->remote_qpn;
 		wc.slid = qp->remote_ah_attr.dlid;
@@ -514,6 +513,7 @@
 			goto done;
 		}
 		wc.byte_len = qp->r_len;
+		wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
 		goto last_imm;
 
 	case OP(RDMA_WRITE_LAST):
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index e0ec540..7779165 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1494,7 +1494,8 @@
 
 	props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
 		IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
-		IB_DEVICE_SYS_IMAGE_GUID;
+		IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
+		IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
 	props->page_size_cap = PAGE_SIZE;
 	props->vendor_id = dev->dd->ipath_vendorid;
 	props->vendor_part_id = dev->dd->ipath_deviceid;
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 8e02ecf..a80df22 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -333,6 +333,9 @@
 		cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) +
 		send_wqe_overhead(type, qp->flags);
 
+	if (s > dev->dev->caps.max_sq_desc_sz)
+		return -EINVAL;
+
 	/*
 	 * Hermon supports shrinking WQEs, such that a single work
 	 * request can include multiple units of 1 << wqe_shift.  This
@@ -372,9 +375,6 @@
 		qp->sq.wqe_shift = ilog2(roundup_pow_of_two(s));
 
 	for (;;) {
-		if (1 << qp->sq.wqe_shift > dev->dev->caps.max_sq_desc_sz)
-			return -EINVAL;
-
 		qp->sq_max_wqes_per_wr = DIV_ROUND_UP(s, 1U << qp->sq.wqe_shift);
 
 		/*
@@ -395,7 +395,8 @@
 		++qp->sq.wqe_shift;
 	}
 
-	qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) -
+	qp->sq.max_gs = (min(dev->dev->caps.max_sq_desc_sz,
+			     (qp->sq_max_wqes_per_wr << qp->sq.wqe_shift)) -
 			 send_wqe_overhead(type, qp->flags)) /
 		sizeof (struct mlx4_wqe_data_seg);
 
@@ -411,7 +412,9 @@
 
 	cap->max_send_wr  = qp->sq.max_post =
 		(qp->sq.wqe_cnt - qp->sq_spare_wqes) / qp->sq_max_wqes_per_wr;
-	cap->max_send_sge = qp->sq.max_gs;
+	cap->max_send_sge = min(qp->sq.max_gs,
+				min(dev->dev->caps.max_sq_sg,
+				    dev->dev->caps.max_rq_sg));
 	/* We don't support inline sends for kernel QPs (yet) */
 	cap->max_inline_data = 0;
 
@@ -1457,7 +1460,7 @@
 	unsigned ind;
 	int uninitialized_var(stamp);
 	int uninitialized_var(size);
-	unsigned seglen;
+	unsigned uninitialized_var(seglen);
 	int i;
 
 	spin_lock_irqsave(&qp->sq.lock, flags);
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 9ebadd6..200cf13f 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -45,6 +45,7 @@
 #include "mthca_cmd.h"
 #include "mthca_profile.h"
 #include "mthca_memfree.h"
+#include "mthca_wqe.h"
 
 MODULE_AUTHOR("Roland Dreier");
 MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver");
@@ -200,7 +201,18 @@
 	mdev->limits.gid_table_len  	= dev_lim->max_gids;
 	mdev->limits.pkey_table_len 	= dev_lim->max_pkeys;
 	mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay;
-	mdev->limits.max_sg             = dev_lim->max_sg;
+	/*
+	 * Need to allow for worst case send WQE overhead and check
+	 * whether max_desc_sz imposes a lower limit than max_sg; UD
+	 * send has the biggest overhead.
+	 */
+	mdev->limits.max_sg		= min_t(int, dev_lim->max_sg,
+					      (dev_lim->max_desc_sz -
+					       sizeof (struct mthca_next_seg) -
+					       (mthca_is_memfree(mdev) ?
+						sizeof (struct mthca_arbel_ud_seg) :
+						sizeof (struct mthca_tavor_ud_seg))) /
+						sizeof (struct mthca_data_seg));
 	mdev->limits.max_wqes           = dev_lim->max_qp_sz;
 	mdev->limits.max_qp_init_rdma   = dev_lim->max_requester_per_qp;
 	mdev->limits.reserved_qps       = dev_lim->reserved_qps;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index d00a2c1..3f663fb 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -194,7 +194,13 @@
 	/* Set the cached Q_Key before we attach if it's the broadcast group */
 	if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
 		    sizeof (union ib_gid))) {
+		spin_lock_irq(&priv->lock);
+		if (!priv->broadcast) {
+			spin_unlock_irq(&priv->lock);
+			return -EAGAIN;
+		}
 		priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey);
+		spin_unlock_irq(&priv->lock);
 		priv->tx_wr.wr.ud.remote_qkey = priv->qkey;
 	}
 
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 4a95adc..af58a6f 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -807,6 +807,8 @@
 static void atkbd_cleanup(struct serio *serio)
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
+
+	atkbd_disable(atkbd);
 	ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
 }
 
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 3dea0c5..45767e7 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -136,6 +136,9 @@
 		set_bit(code, input_dev->keybit);
 	}
 
+	for (i = 0; i < pdata->direct_key_num; i++)
+		set_bit(pdata->direct_key_map[i], input_dev->keybit);
+
 	keypad->rotary_up_key[0] = pdata->rotary0_up_key;
 	keypad->rotary_up_key[1] = pdata->rotary1_up_key;
 	keypad->rotary_down_key[0] = pdata->rotary0_down_key;
@@ -143,17 +146,21 @@
 	keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
 	keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
 
-	if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
-		set_bit(pdata->rotary0_up_key, input_dev->keybit);
-		set_bit(pdata->rotary0_down_key, input_dev->keybit);
-	} else
-		set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+	if (pdata->enable_rotary0) {
+		if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+			set_bit(pdata->rotary0_up_key, input_dev->keybit);
+			set_bit(pdata->rotary0_down_key, input_dev->keybit);
+		} else
+			set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+	}
 
-	if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
-		set_bit(pdata->rotary1_up_key, input_dev->keybit);
-		set_bit(pdata->rotary1_down_key, input_dev->keybit);
-	} else
-		set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+	if (pdata->enable_rotary1) {
+		if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+			set_bit(pdata->rotary1_up_key, input_dev->keybit);
+			set_bit(pdata->rotary1_down_key, input_dev->keybit);
+		} else
+			set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+	}
 }
 
 static inline unsigned int lookup_matrix_keycode(
@@ -484,8 +491,13 @@
 	keypad->input_dev = input_dev;
 	input_set_drvdata(input_dev, keypad);
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
-		BIT_MASK(EV_REL);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	if ((keypad->pdata->enable_rotary0 &&
+			keypad->pdata->rotary0_rel_code) ||
+	    (keypad->pdata->enable_rotary1 &&
+			keypad->pdata->rotary1_rel_code)) {
+		input_dev->evbit[0] |= BIT_MASK(EV_REL);
+	}
 
 	pxa27x_keypad_build_keycode(keypad);
 	platform_set_drvdata(pdev, keypad);
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 9531d8c..d82f7f7 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -20,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-#include <linux/module.h>
 #include <linux/input-polldev.h>
 #include <linux/i2c.h>
 #include <linux/workqueue.h>
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 5ece9f5..9aafa96 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -331,6 +331,13 @@
 		},
 	},
 	{
+		.ident = "Acer TravelMate 660",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+		},
+	},
+	{
 		.ident = "Acer TravelMate 2490",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 65a74cf..592ff55 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -885,6 +885,20 @@
 
 #undef DELAY
 
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+	char param = 0x90;
+	int error;
+
+	error = i8042_command(&param, 0x1059);
+	if (error)
+		printk(KERN_WARNING
+			"Failed to enable DRITEK extension: %d\n",
+			error);
+}
+#endif
+
 #ifdef CONFIG_PM
 /*
  * Here we try to restore the original BIOS settings. We only want to
@@ -942,6 +956,12 @@
 		return -EIO;
 	}
 
+
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
 			printk(KERN_WARNING
@@ -1160,6 +1180,11 @@
 	if (error)
 		return error;
 
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
 	if (!i8042_noaux) {
 		error = i8042_setup_aux();
 		if (error && error != -ENODEV && error != -EBUSY)
@@ -1171,14 +1196,6 @@
 		if (error)
 			goto out_fail;
 	}
-#ifdef CONFIG_X86
-	if (i8042_dritek) {
-		char param = 0x90;
-		error = i8042_command(&param, 0x1059);
-		if (error)
-			goto out_fail;
-	}
-#endif
 /*
  * Ok, everything is ready, let's register all serio ports
  */
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index c5a8661..1e748e4 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -830,7 +830,7 @@
 	struct gtco             *gtco;
 	struct input_dev        *input_dev;
 	struct hid_descriptor   *hid_desc;
-	char                    *report = NULL;
+	char                    *report;
 	int                     result = 0, retry;
 	int			error;
 	struct usb_endpoint_descriptor *endpoint;
@@ -916,12 +916,16 @@
 					 le16_to_cpu(hid_desc->wDescriptorLength),
 					 5000); /* 5 secs */
 
-		if (result == le16_to_cpu(hid_desc->wDescriptorLength))
+		dbg("usb_control_msg result: %d", result);
+		if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+			parse_hid_report_descriptor(gtco, report, result);
 			break;
+		}
 	}
 
+	kfree(report);
+
 	/* If we didn't get the report, fail */
-	dbg("usb_control_msg result: :%d", result);
 	if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
 		err("Failed to get HID Report Descriptor of size: %d",
 		    hid_desc->wDescriptorLength);
@@ -929,12 +933,6 @@
 		goto err_free_urb;
 	}
 
-	/* Now we parse the report */
-	parse_hid_report_descriptor(gtco, report, result);
-
-	/* Now we delete it */
-	kfree(report);
-
 	/* Create a device file node */
 	usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
 	strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
@@ -988,7 +986,6 @@
 	usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
 			gtco->buffer, gtco->buf_dma);
  err_free_devs:
-	kfree(report);
 	input_free_device(input_dev);
 	kfree(gtco);
 	return error;
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd..8384587 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@
 MODULE_PARM_DESC(delay, "Set adc sample delay.");
 
 /*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
  * Set adc mask function.
  *
  * Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@
 			 64000 / rpu);
 	}
 
+	/* Five wire panel? */
+	if (five_wire) {
+		dig3 |= WM9713_45W;
+		dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+		if (pil) {
+			dev_warn(wm->dev,
+				 "Pressure measurement not supported in 5 "
+				 "wire mode, disabling\n");
+			pil = 0;
+		}
+	}
+
 	/* touchpanel pressure */
 	if (pil == 2) {
 		dig3 |= WM9712_PIL;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index e9c7ea4..cdc24ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -608,6 +608,17 @@
 		goto alloc_err;
 	}
 
+	/* set up physical characteristics */
+	wm->codec->phy_init(wm);
+
+	/* load gpio cache */
+	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
 	wm->input_dev = input_allocate_device();
 	if (wm->input_dev == NULL) {
 		ret = -ENOMEM;
@@ -616,6 +627,7 @@
 
 	/* set up touch configuration */
 	wm->input_dev->name = "wm97xx touchscreen";
+	wm->input_dev->phys = "wm97xx";
 	wm->input_dev->open = wm97xx_ts_input_open;
 	wm->input_dev->close = wm97xx_ts_input_close;
 	set_bit(EV_ABS, wm->input_dev->evbit);
@@ -634,17 +646,6 @@
 	if (ret < 0)
 		goto dev_alloc_err;
 
-	/* set up physical characteristics */
-	wm->codec->phy_init(wm);
-
-	/* load gpio cache */
-	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
 	/* register our battery device */
 	wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
 	if (!wm->battery_dev) {
@@ -801,7 +802,7 @@
 EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
 
 static struct device_driver wm97xx_driver = {
-	.name =		"ac97",
+	.name =		"wm97xx-ts",
 	.bus =		&ac97_bus_type,
 	.owner =	THIS_MODULE,
 	.probe =	wm97xx_probe,
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index d3999a8..53f6ad1 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c
@@ -462,11 +462,11 @@
 		default: s = "???"; break;
 	}
 	len += sprintf(page+len, "%-16s %s\n", "type", s);
-	if ((s = cinfo->version[VER_DRIVER]) != 0)
+	if ((s = cinfo->version[VER_DRIVER]) != NULL)
 		len += sprintf(page+len, "%-16s %s\n", "ver_driver", s);
-	if ((s = cinfo->version[VER_CARDTYPE]) != 0)
+	if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
 		len += sprintf(page+len, "%-16s %s\n", "ver_cardtype", s);
-	if ((s = cinfo->version[VER_SERIAL]) != 0)
+	if ((s = cinfo->version[VER_SERIAL]) != NULL)
 		len += sprintf(page+len, "%-16s %s\n", "ver_serial", s);
     
 	len += sprintf(page+len, "%-16s %s\n", "cardname", cinfo->cardname);
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 8080249..1a8de57 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -20,14 +20,11 @@
 /* The pointer to our (page) of device descriptions. */
 static void *lguest_devices;
 
-/* Unique numbering for lguest devices. */
-static unsigned int dev_index;
-
 /* For Guests, device memory can be used as normal memory, so we cast away the
  * __iomem to quieten sparse. */
 static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
 {
-	return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages);
+	return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
 }
 
 static inline void lguest_unmap(void *addr)
@@ -325,8 +322,10 @@
  * As Andrew Tridgell says, "Untested code is buggy code".
  *
  * It's worth reading this carefully: we start with a pointer to the new device
- * descriptor in the "lguest_devices" page. */
-static void add_lguest_device(struct lguest_device_desc *d)
+ * descriptor in the "lguest_devices" page, and the offset into the device
+ * descriptor page so we can uniquely identify it if things go badly wrong. */
+static void add_lguest_device(struct lguest_device_desc *d,
+			      unsigned int offset)
 {
 	struct lguest_device *ldev;
 
@@ -334,18 +333,14 @@
 	 * it. */
 	ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
 	if (!ldev) {
-		printk(KERN_EMERG "Cannot allocate lguest dev %u\n",
-		       dev_index++);
+		printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
+		       offset, d->type);
 		return;
 	}
 
 	/* This devices' parent is the lguest/ dir. */
 	ldev->vdev.dev.parent = &lguest_root;
 	/* We have a unique device index thanks to the dev_index counter. */
-	ldev->vdev.index = dev_index++;
-	/* The device type comes straight from the descriptor.  There's also a
-	 * device vendor field in the virtio_device struct, which we leave as
-	 * 0. */
 	ldev->vdev.id.device = d->type;
 	/* We have a simple set of routines for querying the device's
 	 * configuration information and setting its status. */
@@ -357,8 +352,8 @@
 	 * virtio_device and calls device_register().  This makes the bus
 	 * infrastructure look for a matching driver. */
 	if (register_virtio_device(&ldev->vdev) != 0) {
-		printk(KERN_ERR "Failed to register lguest device %u\n",
-		       ldev->vdev.index);
+		printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
+		       offset, d->type);
 		kfree(ldev);
 	}
 }
@@ -379,7 +374,7 @@
 			break;
 
 		printk("Device at %i has size %u\n", i, desc_size(d));
-		add_lguest_device(d);
+		add_lguest_device(d, i);
 	}
 }
 
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index c14dacd..b26927c 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -203,17 +203,6 @@
  * bitmap file handling - read and write the bitmap file and its superblock
  */
 
-/* copy the pathname of a file to a buffer */
-char *file_path(struct file *file, char *buf, int count)
-{
-	if (!buf)
-		return NULL;
-
-	buf = d_path(&file->f_path, buf, count);
-
-	return IS_ERR(buf) ? NULL : buf;
-}
-
 /*
  * basic page I/O operations
  */
@@ -721,11 +710,13 @@
 		if (bitmap->file) {
 			path = kmalloc(PAGE_SIZE, GFP_KERNEL);
 			if (path)
-				ptr = file_path(bitmap->file, path, PAGE_SIZE);
+				ptr = d_path(&bitmap->file->f_path, path,
+					     PAGE_SIZE);
+
 
 			printk(KERN_ALERT
 			      "%s: kicking failed bitmap file %s from array!\n",
-			      bmname(bitmap), ptr ? ptr : "");
+			      bmname(bitmap), IS_ERR(ptr) ? "" : ptr);
 
 			kfree(path);
 		} else
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 83eb78b..7cf512a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -74,6 +74,8 @@
 
 static void md_print_devices(void);
 
+static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
+
 #define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
 
 /*
@@ -274,6 +276,7 @@
 	atomic_set(&new->active, 1);
 	spin_lock_init(&new->write_lock);
 	init_waitqueue_head(&new->sb_wait);
+	init_waitqueue_head(&new->recovery_wait);
 	new->reshape_position = MaxSector;
 	new->resync_max = MaxSector;
 	new->level = LEVEL_NONE;
@@ -3013,6 +3016,36 @@
 static struct md_sysfs_entry md_degraded = __ATTR_RO(degraded);
 
 static ssize_t
+sync_force_parallel_show(mddev_t *mddev, char *page)
+{
+	return sprintf(page, "%d\n", mddev->parallel_resync);
+}
+
+static ssize_t
+sync_force_parallel_store(mddev_t *mddev, const char *buf, size_t len)
+{
+	long n;
+
+	if (strict_strtol(buf, 10, &n))
+		return -EINVAL;
+
+	if (n != 0 && n != 1)
+		return -EINVAL;
+
+	mddev->parallel_resync = n;
+
+	if (mddev->sync_thread)
+		wake_up(&resync_wait);
+
+	return len;
+}
+
+/* force parallel resync, even with shared block devices */
+static struct md_sysfs_entry md_sync_force_parallel =
+__ATTR(sync_force_parallel, S_IRUGO|S_IWUSR,
+       sync_force_parallel_show, sync_force_parallel_store);
+
+static ssize_t
 sync_speed_show(mddev_t *mddev, char *page)
 {
 	unsigned long resync, dt, db;
@@ -3187,6 +3220,7 @@
 	&md_sync_min.attr,
 	&md_sync_max.attr,
 	&md_sync_speed.attr,
+	&md_sync_force_parallel.attr,
 	&md_sync_completed.attr,
 	&md_max_sync.attr,
 	&md_suspend_lo.attr,
@@ -3691,6 +3725,8 @@
 
 			module_put(mddev->pers->owner);
 			mddev->pers = NULL;
+			/* tell userspace to handle 'inactive' */
+			sysfs_notify(&mddev->kobj, NULL, "array_state");
 
 			set_capacity(disk, 0);
 			mddev->changed = 1;
@@ -3987,8 +4023,8 @@
 	if (!buf)
 		goto out;
 
-	ptr = file_path(mddev->bitmap->file, buf, sizeof(file->pathname));
-	if (!ptr)
+	ptr = d_path(&mddev->bitmap->file->f_path, buf, sizeof(file->pathname));
+	if (IS_ERR(ptr))
 		goto out;
 
 	strcpy(file->pathname, ptr);
@@ -5399,7 +5435,7 @@
 	atomic_sub(blocks, &mddev->recovery_active);
 	wake_up(&mddev->recovery_wait);
 	if (!ok) {
-		set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 		md_wakeup_thread(mddev->thread);
 		// stop recovery, signal do_sync ....
 	}
@@ -5435,8 +5471,11 @@
 			md_wakeup_thread(mddev->thread);
 		}
 		spin_unlock_irq(&mddev->write_lock);
+		sysfs_notify(&mddev->kobj, NULL, "array_state");
 	}
-	wait_event(mddev->sb_wait, mddev->flags==0);
+	wait_event(mddev->sb_wait,
+		   !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+		   !test_bit(MD_CHANGE_PENDING, &mddev->flags));
 }
 
 void md_write_end(mddev_t *mddev)
@@ -5471,13 +5510,17 @@
 			mddev->safemode = 1;
 		spin_unlock_irq(&mddev->write_lock);
 		md_update_sb(mddev, 0);
+
+		sysfs_notify(&mddev->kobj, NULL, "array_state");
+		/* wait for the dirty state to be recorded in the metadata */
+		wait_event(mddev->sb_wait,
+			   !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+			   !test_bit(MD_CHANGE_PENDING, &mddev->flags));
 	} else
 		spin_unlock_irq(&mddev->write_lock);
 }
 EXPORT_SYMBOL_GPL(md_allow_write);
 
-static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
-
 #define SYNC_MARKS	10
 #define	SYNC_MARK_STEP	(3*HZ)
 void md_do_sync(mddev_t *mddev)
@@ -5541,8 +5584,9 @@
 		for_each_mddev(mddev2, tmp) {
 			if (mddev2 == mddev)
 				continue;
-			if (mddev2->curr_resync && 
-			    match_mddev_units(mddev,mddev2)) {
+			if (!mddev->parallel_resync
+			&&  mddev2->curr_resync
+			&&  match_mddev_units(mddev, mddev2)) {
 				DEFINE_WAIT(wq);
 				if (mddev < mddev2 && mddev->curr_resync == 2) {
 					/* arbitrarily yield */
@@ -5622,7 +5666,6 @@
 		window/2,(unsigned long long) max_sectors/2);
 
 	atomic_set(&mddev->recovery_active, 0);
-	init_waitqueue_head(&mddev->recovery_wait);
 	last_check = 0;
 
 	if (j>2) {
@@ -5647,7 +5690,7 @@
 		sectors = mddev->pers->sync_request(mddev, j, &skipped,
 						  currspeed < speed_min(mddev));
 		if (sectors == 0) {
-			set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 			goto out;
 		}
 
@@ -5670,8 +5713,7 @@
 
 		last_check = io_sectors;
 
-		if (test_bit(MD_RECOVERY_INTR, &mddev->recovery) ||
-		    test_bit(MD_RECOVERY_ERR, &mddev->recovery))
+		if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
 			break;
 
 	repeat:
@@ -5725,8 +5767,7 @@
 	/* tell personality that we are finished */
 	mddev->pers->sync_request(mddev, max_sectors, &skipped, 1);
 
-	if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
-	    !test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
+	if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
 	    mddev->curr_resync > 2) {
 		if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
 			if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
@@ -5795,7 +5836,10 @@
 		}
 
 	if (mddev->degraded) {
-		rdev_for_each(rdev, rtmp, mddev)
+		rdev_for_each(rdev, rtmp, mddev) {
+			if (rdev->raid_disk >= 0 &&
+			    !test_bit(In_sync, &rdev->flags))
+				spares++;
 			if (rdev->raid_disk < 0
 			    && !test_bit(Faulty, &rdev->flags)) {
 				rdev->recovery_offset = 0;
@@ -5813,6 +5857,7 @@
 				} else
 					break;
 			}
+		}
 	}
 	return spares;
 }
@@ -5826,7 +5871,7 @@
  * to do that as needed.
  * When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in
  * "->recovery" and create a thread at ->sync_thread.
- * When the thread finishes it sets MD_RECOVERY_DONE (and might set MD_RECOVERY_ERR)
+ * When the thread finishes it sets MD_RECOVERY_DONE
  * and wakeups up this thread which will reap the thread and finish up.
  * This thread also removes any faulty devices (with nr_pending == 0).
  *
@@ -5901,8 +5946,7 @@
 			/* resync has finished, collect result */
 			md_unregister_thread(mddev->sync_thread);
 			mddev->sync_thread = NULL;
-			if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
-			    !test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+			if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
 				/* success...*/
 				/* activate any spares */
 				mddev->pers->spare_active(mddev);
@@ -5926,7 +5970,6 @@
 		 * might be left set
 		 */
 		clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-		clear_bit(MD_RECOVERY_ERR, &mddev->recovery);
 		clear_bit(MD_RECOVERY_INTR, &mddev->recovery);
 		clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
 
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 4f4d1f3..e968116 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -327,7 +327,8 @@
 	if (rdev) {
 		if (test_bit(In_sync, &rdev->flags) ||
 		    atomic_read(&rdev->nr_pending)) {
-			printk(KERN_ERR "hot-remove-disk, slot %d is identified"				" but is still operational!\n", number);
+			printk(KERN_ERR "hot-remove-disk, slot %d is identified"
+			       " but is still operational!\n", number);
 			err = -EBUSY;
 			goto abort;
 		}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index ac409b7..c610b94 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -773,7 +773,7 @@
 	r1bio_t *r1_bio;
 	struct bio *read_bio;
 	int i, targets = 0, disks;
-	struct bitmap *bitmap = mddev->bitmap;
+	struct bitmap *bitmap;
 	unsigned long flags;
 	struct bio_list bl;
 	struct page **behind_pages = NULL;
@@ -802,6 +802,8 @@
 
 	wait_barrier(conf);
 
+	bitmap = mddev->bitmap;
+
 	disk_stat_inc(mddev->gendisk, ios[rw]);
 	disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio));
 
@@ -1025,7 +1027,7 @@
 		/*
 		 * if recovery is running, make sure it aborts.
 		 */
-		set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	} else
 		set_bit(Faulty, &rdev->flags);
 	set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -1146,6 +1148,14 @@
 			err = -EBUSY;
 			goto abort;
 		}
+		/* Only remove non-faulty devices is recovery
+		 * is not possible.
+		 */
+		if (!test_bit(Faulty, &rdev->flags) &&
+		    mddev->degraded < conf->raid_disks) {
+			err = -EBUSY;
+			goto abort;
+		}
 		p->rdev = NULL;
 		synchronize_rcu();
 		if (atomic_read(&rdev->nr_pending)) {
@@ -1282,6 +1292,7 @@
 					rdev_dec_pending(conf->mirrors[i].rdev, mddev);
 				} else {
 					/* fixup the bio for reuse */
+					int size;
 					sbio->bi_vcnt = vcnt;
 					sbio->bi_size = r1_bio->sectors << 9;
 					sbio->bi_idx = 0;
@@ -1295,10 +1306,20 @@
 					sbio->bi_sector = r1_bio->sector +
 						conf->mirrors[i].rdev->data_offset;
 					sbio->bi_bdev = conf->mirrors[i].rdev->bdev;
-					for (j = 0; j < vcnt ; j++)
-						memcpy(page_address(sbio->bi_io_vec[j].bv_page),
+					size = sbio->bi_size;
+					for (j = 0; j < vcnt ; j++) {
+						struct bio_vec *bi;
+						bi = &sbio->bi_io_vec[j];
+						bi->bv_offset = 0;
+						if (size > PAGE_SIZE)
+							bi->bv_len = PAGE_SIZE;
+						else
+							bi->bv_len = size;
+						size -= PAGE_SIZE;
+						memcpy(page_address(bi->bv_page),
 						       page_address(pbio->bi_io_vec[j].bv_page),
 						       PAGE_SIZE);
+					}
 
 				}
 			}
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 8536ede..1de17da 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1020,7 +1020,7 @@
 		/*
 		 * if recovery is running, make sure it aborts.
 		 */
-		set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	}
 	set_bit(Faulty, &rdev->flags);
 	set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -1171,6 +1171,14 @@
 			err = -EBUSY;
 			goto abort;
 		}
+		/* Only remove faulty devices in recovery
+		 * is not possible.
+		 */
+		if (!test_bit(Faulty, &rdev->flags) &&
+		    enough(conf)) {
+			err = -EBUSY;
+			goto abort;
+		}
 		p->rdev = NULL;
 		synchronize_rcu();
 		if (atomic_read(&rdev->nr_pending)) {
@@ -1237,6 +1245,7 @@
 
 	if (!uptodate)
 		md_error(mddev, conf->mirrors[d].rdev);
+
 	update_head_pos(i, r10_bio);
 
 	while (atomic_dec_and_test(&r10_bio->remaining)) {
@@ -1844,7 +1853,8 @@
 					if (rb2)
 						atomic_dec(&rb2->remaining);
 					r10_bio = rb2;
-					if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery))
+					if (!test_and_set_bit(MD_RECOVERY_INTR,
+							      &mddev->recovery))
 						printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n",
 						       mdname(mddev));
 					break;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 93fde48..c37e256 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -94,6 +94,8 @@
 #define __inline__
 #endif
 
+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
 #if !RAID6_USE_EMPTY_ZERO_PAGE
 /* In .bss so it's zeroed */
 const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
@@ -1143,10 +1145,12 @@
 		set_bit(R5_UPTODATE, &sh->dev[i].flags);
 		if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
 			rdev = conf->disks[i].rdev;
-			printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
-			       mdname(conf->mddev), STRIPE_SECTORS,
-			       (unsigned long long)(sh->sector + rdev->data_offset),
-			       bdevname(rdev->bdev, b));
+			printk_rl(KERN_INFO "raid5:%s: read error corrected"
+				  " (%lu sectors at %llu on %s)\n",
+				  mdname(conf->mddev), STRIPE_SECTORS,
+				  (unsigned long long)(sh->sector
+						       + rdev->data_offset),
+				  bdevname(rdev->bdev, b));
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
 		}
@@ -1160,16 +1164,22 @@
 		clear_bit(R5_UPTODATE, &sh->dev[i].flags);
 		atomic_inc(&rdev->read_errors);
 		if (conf->mddev->degraded)
-			printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
-			       mdname(conf->mddev),
-			       (unsigned long long)(sh->sector + rdev->data_offset),
-			       bdn);
+			printk_rl(KERN_WARNING
+				  "raid5:%s: read error not correctable "
+				  "(sector %llu on %s).\n",
+				  mdname(conf->mddev),
+				  (unsigned long long)(sh->sector
+						       + rdev->data_offset),
+				  bdn);
 		else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
 			/* Oh, no!!! */
-			printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
-			       mdname(conf->mddev),
-			       (unsigned long long)(sh->sector + rdev->data_offset),
-			       bdn);
+			printk_rl(KERN_WARNING
+				  "raid5:%s: read error NOT corrected!! "
+				  "(sector %llu on %s).\n",
+				  mdname(conf->mddev),
+				  (unsigned long long)(sh->sector
+						       + rdev->data_offset),
+				  bdn);
 		else if (atomic_read(&rdev->read_errors)
 			 > conf->max_nr_stripes)
 			printk(KERN_WARNING
@@ -1258,7 +1268,7 @@
 			/*
 			 * if recovery was running, make sure it aborts.
 			 */
-			set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 		}
 		set_bit(Faulty, &rdev->flags);
 		printk (KERN_ALERT
@@ -1992,6 +2002,7 @@
 		 * have quiesced.
 		 */
 		if ((s->uptodate == disks - 1) &&
+		    (s->failed && disk_idx == s->failed_num) &&
 		    !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
 			set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
 			set_bit(R5_Wantcompute, &dev->flags);
@@ -2077,7 +2088,9 @@
 			/* we would like to get this block, possibly
 			 * by computing it, but we might not be able to
 			 */
-			if (s->uptodate == disks-1) {
+			if ((s->uptodate == disks - 1) &&
+			    (s->failed && (i == r6s->failed_num[0] ||
+					   i == r6s->failed_num[1]))) {
 				pr_debug("Computing stripe %llu block %d\n",
 				       (unsigned long long)sh->sector, i);
 				compute_block_1(sh, i, 0);
@@ -2635,6 +2648,7 @@
 	struct r5dev *dev;
 	unsigned long pending = 0;
 	mdk_rdev_t *blocked_rdev = NULL;
+	int prexor;
 
 	memset(&s, 0, sizeof(s));
 	pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d "
@@ -2764,9 +2778,11 @@
 	/* leave prexor set until postxor is done, allows us to distinguish
 	 * a rmw from a rcw during biodrain
 	 */
+	prexor = 0;
 	if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) &&
 		test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
 
+		prexor = 1;
 		clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
 		clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack);
 		clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
@@ -2800,6 +2816,8 @@
 				if (!test_and_set_bit(
 				    STRIPE_OP_IO, &sh->ops.pending))
 					sh->ops.count++;
+				if (prexor)
+					continue;
 				if (!test_bit(R5_Insync, &dev->flags) ||
 				    (i == sh->pd_idx && s.failed == 0))
 					set_bit(STRIPE_INSYNC, &sh->state);
@@ -4564,6 +4582,14 @@
 			err = -EBUSY;
 			goto abort;
 		}
+		/* Only remove non-faulty devices if recovery
+		 * isn't possible.
+		 */
+		if (!test_bit(Faulty, &rdev->flags) &&
+		    mddev->degraded <= conf->max_degraded) {
+			err = -EBUSY;
+			goto abort;
+		}
 		p->rdev = NULL;
 		synchronize_rcu();
 		if (atomic_read(&rdev->nr_pending)) {
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index cc11c4c..09a829d 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,12 +2,7 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y := common/
-
-obj-$(CONFIG_VIDEO_MEDIA) += common/
-
-# Since hybrid devices are here, should be compiled if DVB and/or V4L
-obj-$(CONFIG_VIDEO_MEDIA) += video/
+obj-y += common/ video/
 
 obj-$(CONFIG_VIDEO_DEV) += radio/
 obj-$(CONFIG_DVB_CORE)  += dvb/
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index d620654..8548296 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -21,6 +21,7 @@
 	tristate
 	default VIDEO_MEDIA && I2C
 	depends on VIDEO_MEDIA && I2C
+	select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
 	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
 	select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 5d05b53..0dc2bef 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -101,7 +101,7 @@
 	MXL_QAM,
 	MXL_ANALOG_CABLE,
 	MXL_ANALOG_OTA
-} tuner_modu_type;
+};
 
 /* MXL5005 Tuner Register Struct */
 struct TunerReg {
@@ -194,7 +194,7 @@
 	RFSYN_DIVM,                /* 88 */
 	DN_BYPASS_AGC_I2C          /* 89 */
 #endif
-} MXL5005_ControlName;
+};
 
 /*
  * The following context is source code provided by MaxLinear.
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index 42b5f5d..f1894fe 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -648,11 +648,11 @@
 	unsigned char *regs = priv->tda18271_regs;
 	u8 val;
 
-	tda18271_lookup_map(fe, RF_CAL, freq, &val);
+	int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
 
 	regs[R_EB14] = val;
 
-	return 0;
+	return ret;
 }
 
 /*
diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c
index d30d2c9..8555d9c 100644
--- a/drivers/media/common/tuners/tda827x.c
+++ b/drivers/media/common/tuners/tda827x.c
@@ -418,13 +418,13 @@
 	unsigned char buf[] = {0x22, 0x01};
 	int arg;
 	int gp_func;
-	struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0,
-			       .buf = buf, .len = sizeof(buf) };
+	struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) };
 
 	if (NULL == priv->cfg) {
 		dprintk("tda827x_config not defined, cannot set LNA gain!\n");
 		return;
 	}
+	msg.addr = priv->cfg->switch_addr;
 	if (priv->cfg->config) {
 		if (high)
 			dprintk("setting LNA to high gain\n");
diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/common/tuners/tea5761.c
index b93cdef..b23dade 100644
--- a/drivers/media/common/tuners/tea5761.c
+++ b/drivers/media/common/tuners/tea5761.c
@@ -295,7 +295,7 @@
 {
 	struct tea5761_priv *priv = NULL;
 
-	if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL)
+	if (tea5761_autodetection(i2c_adap, i2c_addr) != 0)
 		return NULL;
 
 	priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL);
diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h
index 3ad6c8e..cb1c714 100644
--- a/drivers/media/common/tuners/tuner-i2c.h
+++ b/drivers/media/common/tuners/tuner-i2c.h
@@ -170,4 +170,12 @@
 	__ret;								\
 })
 
+#define hybrid_tuner_report_instance_count(state)			\
+({									\
+	int __ret = 0;							\
+	if (state)							\
+		__ret = state->i2c_props.count;				\
+	__ret;								\
+})
+
 #endif /* __TUNER_I2C_H__ */
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index be8d903..266c255 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -1018,8 +1018,10 @@
 			fe->ops.i2c_gate_ctrl(fe, 1);
 
 		if (1 != i2c_transfer(i2c_adap, &msg, 1))
-			tuner_warn("unable to probe %s, proceeding anyway.",
-				   tuners[type].name);
+			printk(KERN_WARNING "tuner-simple %d-%04x: "
+			       "unable to probe %s, proceeding anyway.",
+			       i2c_adapter_id(i2c_adap), i2c_addr,
+			       tuners[type].name);
 
 		if (fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 0);
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index 9e9003c..0cbde17 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -46,7 +46,7 @@
 MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
 				"default firmware name\n");
 
-static LIST_HEAD(xc2028_list);
+static LIST_HEAD(hybrid_tuner_instance_list);
 static DEFINE_MUTEX(xc2028_list_mutex);
 
 /* struct for storing firmware table */
@@ -68,12 +68,11 @@
 };
 
 struct xc2028_data {
-	struct list_head        xc2028_list;
+	struct list_head        hybrid_tuner_instance_list;
 	struct tuner_i2c_props  i2c_props;
 	int                     (*tuner_callback) (void *dev,
 						   int command, int arg);
 	void			*video_dev;
-	int			count;
 	__u32			frequency;
 
 	struct firmware_description *firm;
@@ -1072,20 +1071,19 @@
 
 	mutex_lock(&xc2028_list_mutex);
 
-	priv->count--;
-
-	if (!priv->count) {
-		list_del(&priv->xc2028_list);
-
+	/* only perform final cleanup if this is the last instance */
+	if (hybrid_tuner_report_instance_count(priv) == 1) {
 		kfree(priv->ctrl.fname);
-
 		free_firmware(priv);
-		kfree(priv);
-		fe->tuner_priv = NULL;
 	}
 
+	if (priv)
+		hybrid_tuner_release_state(priv);
+
 	mutex_unlock(&xc2028_list_mutex);
 
+	fe->tuner_priv = NULL;
+
 	return 0;
 }
 
@@ -1150,7 +1148,7 @@
 				   struct xc2028_config *cfg)
 {
 	struct xc2028_data *priv;
-	void               *video_dev;
+	int instance;
 
 	if (debug)
 		printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
@@ -1163,49 +1161,41 @@
 		return NULL;
 	}
 
-	video_dev = cfg->i2c_adap->algo_data;
-
-	if (debug)
-		printk(KERN_DEBUG "xc2028: video_dev =%p\n", video_dev);
-
 	mutex_lock(&xc2028_list_mutex);
 
-	list_for_each_entry(priv, &xc2028_list, xc2028_list) {
-		if (&priv->i2c_props.adap->dev == &cfg->i2c_adap->dev) {
-			video_dev = NULL;
-			if (debug)
-				printk(KERN_DEBUG "xc2028: reusing device\n");
-
-			break;
-		}
-	}
-
-	if (video_dev) {
-		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-		if (priv == NULL) {
-			mutex_unlock(&xc2028_list_mutex);
-			return NULL;
-		}
-
-		priv->i2c_props.addr = cfg->i2c_addr;
-		priv->i2c_props.adap = cfg->i2c_adap;
-		priv->i2c_props.name = "xc2028";
-
-		priv->video_dev = video_dev;
+	instance = hybrid_tuner_request_state(struct xc2028_data, priv,
+					      hybrid_tuner_instance_list,
+					      cfg->i2c_adap, cfg->i2c_addr,
+					      "xc2028");
+	switch (instance) {
+	case 0:
+		/* memory allocation failure */
+		goto fail;
+		break;
+	case 1:
+		/* new tuner instance */
 		priv->tuner_callback = cfg->callback;
 		priv->ctrl.max_len = 13;
 
 		mutex_init(&priv->lock);
 
-		list_add_tail(&priv->xc2028_list, &xc2028_list);
+		/* analog side (tuner-core) uses i2c_adap->algo_data.
+		 * digital side is not guaranteed to have algo_data defined.
+		 *
+		 * digital side will always have fe->dvb defined.
+		 * analog side (tuner-core) doesn't (yet) define fe->dvb.
+		 */
+		priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ?
+				   fe->dvb->priv : cfg->i2c_adap->algo_data;
+
+		fe->tuner_priv = priv;
+		break;
+	case 2:
+		/* existing tuner instance */
+		fe->tuner_priv = priv;
+		break;
 	}
 
-	fe->tuner_priv = priv;
-	priv->count++;
-
-	if (debug)
-		printk(KERN_DEBUG "xc2028: usage count is %i\n", priv->count);
-
 	memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
 	       sizeof(xc2028_dvb_tuner_ops));
 
@@ -1217,6 +1207,11 @@
 	mutex_unlock(&xc2028_list_mutex);
 
 	return fe;
+fail:
+	mutex_unlock(&xc2028_list_mutex);
+
+	xc2028_dvb_release(fe);
+	return NULL;
 }
 
 EXPORT_SYMBOL(xc2028_attach);
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
index 449fb5c..ae0d76a 100644
--- a/drivers/media/dvb/b2c2/flexcop-usb.c
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -379,7 +379,7 @@
 
 static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
 {
-	u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize;
+	u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
 	int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
 	int buffer_offset = 0;
 
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index f5010e8..a824f37 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -82,22 +82,22 @@
 
 struct dvbt_set_parameters_msg {
 	uint8_t cmd;
-	uint32_t freq;
+	__le32 freq;
 	uint8_t bandwidth;
-	uint16_t tps;
+	__le16 tps;
 	uint8_t flags;
 } __attribute__((packed));
 
 struct dvbt_get_status_msg {
-	uint32_t freq;
+	__le32 freq;
 	uint8_t bandwidth;
-	uint16_t tps;
+	__le16 tps;
 	uint8_t flags;
-	uint16_t gain;
+	__le16 gain;
 	uint8_t snr;
-	uint32_t viterbi_error_rate;
-	uint32_t rs_error_rate;
-	uint32_t uncorrected_block_count;
+	__le32 viterbi_error_rate;
+	__le32 rs_error_rate;
+	__le32 uncorrected_block_count;
 	uint8_t lock_bits;
 	uint8_t prev_lock_bits;
 } __attribute__((packed));
@@ -136,6 +136,7 @@
 	wait_queue_head_t poll_wq;
 	int pending_fe_events;
 	int disconnect_pending;
+	unsigned int uncorrected_block_count;
 	atomic_t inuse;
 
 	void *streambuf;
@@ -147,7 +148,7 @@
 	char phys[64];
 	struct delayed_work rc_query_work;
 	int rc_input_event;
-	u32 rc_last_code;
+	__le32 rc_last_code;
 	unsigned long last_event_jiffies;
 #endif
 };
@@ -160,7 +161,7 @@
 
 struct cinergyt2_rc_event {
 	char type;
-	uint32_t value;
+	__le32 value;
 } __attribute__((packed));
 
 static const uint32_t rc_keys[] = {
@@ -619,8 +620,11 @@
 	{
 		uint32_t unc_count;
 
-		unc_count = stat->uncorrected_block_count;
-		stat->uncorrected_block_count = 0;
+		if (mutex_lock_interruptible(&cinergyt2->sem))
+			return -ERESTARTSYS;
+		unc_count = cinergyt2->uncorrected_block_count;
+		cinergyt2->uncorrected_block_count = 0;
+		mutex_unlock(&cinergyt2->sem);
 
 		/* UNC are already converted to host byte order... */
 		return put_user(unc_count,(__u32 __user *) arg);
@@ -769,7 +773,7 @@
 				input_sync(cinergyt2->rc_input_dev);
 				cinergyt2->rc_input_event = KEY_MAX;
 			}
-			cinergyt2->rc_last_code = ~0;
+			cinergyt2->rc_last_code = cpu_to_le32(~0);
 		}
 		goto out;
 	}
@@ -780,7 +784,7 @@
 			n, le32_to_cpu(rc_events[n].value), rc_events[n].type);
 
 		if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC &&
-		    rc_events[n].value == ~0) {
+		    rc_events[n].value == cpu_to_le32(~0)) {
 			/* keyrepeat bit -> just repeat last rc_input_event */
 		} else {
 			cinergyt2->rc_input_event = KEY_MAX;
@@ -795,7 +799,7 @@
 
 		if (cinergyt2->rc_input_event != KEY_MAX) {
 			if (rc_events[n].value == cinergyt2->rc_last_code &&
-			    cinergyt2->rc_last_code != ~0) {
+			    cinergyt2->rc_last_code != cpu_to_le32(~0)) {
 				/* emit a key-up so the double event is recognized */
 				dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event);
 				input_report_key(cinergyt2->rc_input_dev,
@@ -829,7 +833,7 @@
 	usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys));
 	strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys));
 	cinergyt2->rc_input_event = KEY_MAX;
-	cinergyt2->rc_last_code = ~0;
+	cinergyt2->rc_last_code = cpu_to_le32(~0);
 	INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc);
 
 	input_dev->name = DRIVER_NAME " remote control";
@@ -840,8 +844,8 @@
 	input_dev->keycodesize = 0;
 	input_dev->keycodemax = 0;
 	input_dev->id.bustype = BUS_USB;
-	input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor;
-	input_dev->id.product = cinergyt2->udev->descriptor.idProduct;
+	input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor);
+	input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct);
 	input_dev->id.version = 1;
 	input_dev->dev.parent = &cinergyt2->udev->dev;
 
@@ -889,18 +893,16 @@
 	char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS };
 	struct dvbt_get_status_msg *s = &cinergyt2->status;
 	uint8_t lock_bits;
-	uint32_t unc;
 
 	if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
 		return;
 
-	unc = s->uncorrected_block_count;
 	lock_bits = s->lock_bits;
 
 	cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s));
 
-	unc += le32_to_cpu(s->uncorrected_block_count);
-	s->uncorrected_block_count = unc;
+	cinergyt2->uncorrected_block_count +=
+		le32_to_cpu(s->uncorrected_block_count);
 
 	if (lock_bits != s->lock_bits) {
 		wake_up_interruptible(&cinergyt2->poll_wq);
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 56d871c..c2334ae 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -168,7 +168,7 @@
  *  stolen from eth.c out of the linux kernel, hacked for dvb-device
  *  by Michael Holzt <kju@debian.org>
  */
-static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb,
+static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
 				      struct net_device *dev)
 {
 	struct ethhdr *eth;
@@ -277,10 +277,10 @@
 			if(ext_len >= 0) {
 				p->ule_next_hdr += ext_len;
 				if (!p->ule_bridged) {
-					p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr);
+					p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr);
 					p->ule_next_hdr += 2;
 				} else {
-					p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
+					p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
 					/* This assures the extension handling loop will terminate. */
 				}
 			}
@@ -294,7 +294,7 @@
 		if (ule_optional_ext_handlers[htype])
 			(void)ule_optional_ext_handlers[htype]( p );
 		p->ule_next_hdr += ext_len;
-		p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) );
+		p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) );
 		/*
 		 * note: the length of the next header type is included in the
 		 * length of THIS optional extension header
@@ -594,8 +594,8 @@
 		/* Check for complete payload. */
 		if (priv->ule_sndu_remain <= 0) {
 			/* Check CRC32, we've got it in our skb already. */
-			unsigned short ulen = htons(priv->ule_sndu_len);
-			unsigned short utype = htons(priv->ule_sndu_type);
+			__be16 ulen = htons(priv->ule_sndu_len);
+			__be16 utype = htons(priv->ule_sndu_type);
 			const u8 *tail;
 			struct kvec iov[3] = {
 				{ &ulen, sizeof ulen },
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index cf4584e..f00a0eb 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB && I2C
+	depends on DVB_CORE && USB && I2C && INPUT
 	depends on HOTPLUG	# due to FW_LOADER
 	select FW_LOADER
 	help
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 3462238..c4d40fe 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -111,8 +111,8 @@
 	struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
 	s8 a;
 	int if1=1220;
-	if (adap->dev->udev->descriptor.idVendor  == USB_VID_HAUPPAUGE &&
-		adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) {
+	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
 		if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
 	}
 	return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
@@ -402,8 +402,8 @@
 {
 	struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
 
-	if (desc->idVendor  == USB_VID_PINNACLE &&
-	    desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX)
+	if (desc->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
 	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
 	else
 	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
@@ -845,8 +845,8 @@
 	struct i2c_adapter *tun_i2c;
 	s8 a;
 	int if1=1220;
-	if (adap->dev->udev->descriptor.idVendor  == USB_VID_HAUPPAUGE &&
-		adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) {
+	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
 		if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
 	}
 	if (st->is_dib7000pc)
@@ -990,11 +990,12 @@
 /* STK7070P */
 static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	if (adap->dev->udev->descriptor.idVendor  == USB_VID_PINNACLE &&
-	adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E)
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
 	else
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
 	msleep(10);
 	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
 	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
index e1112e3..733a7ff 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@@ -127,7 +127,7 @@
 	if ((*pos + hx->len + 4) >= fw->size)
 		return -EINVAL;
 
-	hx->addr = le16_to_cpu( *((u16 *) &b[1]) );
+	hx->addr = b[1] | (b[2] << 8);
 	hx->type = b[3];
 
 	if (hx->type == 0x04) {
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index 9a942af..2653120 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -146,24 +146,24 @@
 		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
 			if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
 				if(gp8psk_load_bcm4500fw(d))
-					return EINVAL;
+					return -EINVAL;
 
 		if (! (status & bmIntersilOn)) /* LNB Power */
 			if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
 					&buf, 1))
-				return EINVAL;
+				return -EINVAL;
 
 		/* Set DVB mode to 1 */
 		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
 			if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
-				return EINVAL;
+				return -EINVAL;
 		/* Abort possible TS (if previous tune crashed) */
 		if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
-			return EINVAL;
+			return -EINVAL;
 	} else {
 		/* Turn off LNB power */
 		if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
-			return EINVAL;
+			return -EINVAL;
 		/* Turn off 8psk power */
 		if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
 			return -EINVAL;
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index a12e6f7..54626a0 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -16,6 +16,7 @@
 #include "qt1010.h"
 #include "tda1004x.h"
 #include "tda827x.h"
+#include <asm/unaligned.h>
 
 /* debug */
 static int dvb_usb_m920x_debug;
@@ -347,13 +348,13 @@
 
 	for (pass = 0; pass < 2; pass++) {
 		for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
-			value = le16_to_cpu(*(u16 *)(fw->data + i));
+			value = get_unaligned_le16(fw->data + i);
 			i += sizeof(u16);
 
-			index = le16_to_cpu(*(u16 *)(fw->data + i));
+			index = get_unaligned_le16(fw->data + i);
 			i += sizeof(u16);
 
-			size = le16_to_cpu(*(u16 *)(fw->data + i));
+			size = get_unaligned_le16(fw->data + i);
 			i += sizeof(u16);
 
 			if (pass == 1) {
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
index 786e37d..3eedfdf 100644
--- a/drivers/media/dvb/frontends/dib0070.h
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -37,7 +37,20 @@
 	u8 flip_chip;
 };
 
-extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
+#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+					   struct i2c_adapter *i2c,
+					   struct dib0070_config *cfg);
+#else
+static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+						  struct i2c_adapter *i2c,
+						  struct dib0070_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
 extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
 extern u16 dib0070_wbd_offset(struct dvb_frontend *);
 
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
index 081bd81..07c4d12 100644
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -37,7 +37,20 @@
 
 #define DEFAULT_DIB7000P_I2C_ADDRESS 18
 
-extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+					    u8 i2c_addr,
+					    struct dib7000p_config *cfg);
+#else
+static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+						   u8 i2c_addr,
+						   struct dib7000p_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
 extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]);
 
 extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index c7b5785..5ed3254 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -126,7 +126,7 @@
 		       reg, err);
 		return -EREMOTEIO;
 	}
-	return le16_to_cpup((u16*)buf);
+	return buf[0] | (buf[1] << 8);
 }
 
 static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
@@ -140,9 +140,9 @@
 	dprintk("Firmware is %Zd bytes\n",fw->size);
 
 	/* Get size of firmware A and B */
-	firmwareAsize = le32_to_cpu(*((u32*)fw->data));
+	firmwareAsize = le32_to_cpu(*((__le32*)fw->data));
 	dprintk("FirmwareA is %i bytes\n",firmwareAsize);
-	firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4)));
+	firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4)));
 	dprintk("FirmwareB is %i bytes\n",firmwareBsize);
 
 	/* Upload firmware */
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 747e7f1..f05d43d 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -51,6 +51,7 @@
 #include <linux/crc32.h>
 #include <linux/i2c.h>
 #include <linux/kthread.h>
+#include <asm/unaligned.h>
 
 #include <asm/system.h>
 
@@ -1461,9 +1462,9 @@
 	ptr += 4;
 
 	/* check dpram file */
-	crc = ntohl(*(u32*) ptr);
+	crc = get_unaligned_be32(ptr);
 	ptr += 4;
-	len = ntohl(*(u32*) ptr);
+	len = get_unaligned_be32(ptr);
 	ptr += 4;
 	if (len >= 512) {
 		printk("dvb-ttpci: dpram file is way too big.\n");
@@ -1478,9 +1479,9 @@
 	ptr += len;
 
 	/* check root file */
-	crc = ntohl(*(u32*) ptr);
+	crc = get_unaligned_be32(ptr);
 	ptr += 4;
-	len = ntohl(*(u32*) ptr);
+	len = get_unaligned_be32(ptr);
 	ptr += 4;
 
 	if (len <= 200000 || len >= 300000 ||
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index 3e6b650..ec55a968 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -965,8 +965,9 @@
 
 static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock)
 {
-	int i, n;
+	unsigned i, n;
 	int progressive = 0;
+	int match = 0;
 
 	dprintk(2, "av7110:%p, \n", av7110);
 
@@ -975,12 +976,31 @@
 			return -EBUSY;
 	}
 
-	for (i = 0; i < len - 5; i++) {
-		/* get progressive flag from picture extension */
-		if (buf[i] == 0x00 && buf[i+1] == 0x00 &&
-		    buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 &&
-		    (buf[i+4] & 0xf0) == 0x10)
-			progressive = buf[i+5] & 0x08;
+	/* search in buf for instances of 00 00 01 b5 1? */
+	for (i = 0; i < len; i++) {
+		unsigned char c;
+		if (get_user(c, buf + i))
+			return -EFAULT;
+		if (match == 5) {
+			progressive = c & 0x08;
+			match = 0;
+		}
+		if (c == 0x00) {
+			match = (match == 1 || match == 2) ? 2 : 1;
+			continue;
+		}
+		switch (match++) {
+		case 2: if (c == 0x01)
+				continue;
+			break;
+		case 3: if (c == 0xb5)
+				continue;
+			break;
+		case 4: if ((c & 0xf0) == 0x10)
+				continue;
+			break;
+		}
+		match = 0;
 	}
 
 	/* setting n always > 1, fixes problems when playing stillframes
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 732ce4d..5d2d81a 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -552,7 +552,7 @@
 	u16 csum = 0, cc;
 	int i;
 	for (i = 0; i < len; i += 2)
-		csum ^= le16_to_cpup((u16 *) (muxpack + i));
+		csum ^= le16_to_cpup((__le16 *) (muxpack + i));
 	if (csum) {
 		printk("%s: muxpack with incorrect checksum, ignoring\n",
 		       __func__);
diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig
index 0712899..a23cc0a 100644
--- a/drivers/media/dvb/ttusb-dec/Kconfig
+++ b/drivers/media/dvb/ttusb-dec/Kconfig
@@ -1,6 +1,6 @@
 config DVB_TTUSB_DEC
 	tristate "Technotrend/Hauppauge USB DEC devices"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && INPUT
 	depends on HOTPLUG	# due to FW_LOADER
 	select FW_LOADER
 	select CRC32
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 42eee04..fefdc05 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -343,7 +343,7 @@
 	u8 c[COMMAND_PACKET_SIZE];
 	int c_length;
 	int result;
-	unsigned int tmp;
+	__be32 tmp;
 
 	dprintk("%s\n", __func__);
 
@@ -398,9 +398,9 @@
 		   0x00, 0x00, 0xff, 0xff,
 		   0xff, 0xff, 0xff, 0xff };
 
-	u16 pcr = htons(dec->pid[DMX_PES_PCR]);
-	u16 audio = htons(dec->pid[DMX_PES_AUDIO]);
-	u16 video = htons(dec->pid[DMX_PES_VIDEO]);
+	__be16 pcr = htons(dec->pid[DMX_PES_PCR]);
+	__be16 audio = htons(dec->pid[DMX_PES_AUDIO]);
+	__be16 video = htons(dec->pid[DMX_PES_VIDEO]);
 
 	dprintk("%s\n", __func__);
 
@@ -435,7 +435,7 @@
 	case 0x01: {		/* VideoStream */
 		int prebytes = pva[5] & 0x03;
 		int postbytes = (pva[5] & 0x0c) >> 2;
-		u16 v_pes_payload_length;
+		__be16 v_pes_payload_length;
 
 		if (output_pva) {
 			dec->video_filter->feed->cb.ts(pva, length, NULL, 0,
@@ -1006,7 +1006,7 @@
 		    0x00, 0x00, 0x00, 0x00,
 		    0x00, 0x00, 0x00, 0x00,
 		    0x00 };
-	u16 pid;
+	__be16 pid;
 	u8 c[COMMAND_PACKET_SIZE];
 	int c_length;
 	int result;
@@ -1278,9 +1278,10 @@
 	u8 *firmware = NULL;
 	size_t firmware_size = 0;
 	u16 firmware_csum = 0;
-	u16 firmware_csum_ns;
-	u32 firmware_size_nl;
-	u32 crc32_csum, crc32_check, tmp;
+	__be16 firmware_csum_ns;
+	__be32 firmware_size_nl;
+	u32 crc32_csum, crc32_check;
+	__be32 tmp;
 	const struct firmware *fw_entry = NULL;
 
 	dprintk("%s\n", __func__);
@@ -1306,7 +1307,7 @@
 	   valid. */
 	crc32_csum = crc32(~0L, firmware, 56) ^ ~0L;
 	memcpy(&tmp, &firmware[56], 4);
-	crc32_check = htonl(tmp);
+	crc32_check = ntohl(tmp);
 	if (crc32_csum != crc32_check) {
 		printk("%s: crc32 check of DSP code failed (calculated "
 		       "0x%08x != 0x%08x in file), file invalid.\n",
@@ -1627,7 +1628,7 @@
 
 	usb_set_intfdata(intf, (void *)dec);
 
-	switch (le16_to_cpu(id->idProduct)) {
+	switch (id->idProduct) {
 	case 0x1006:
 		ttusb_dec_set_model(dec, TTUSB_DEC3000S);
 		break;
@@ -1652,7 +1653,7 @@
 	ttusb_dec_init_dvb(dec);
 
 	dec->adapter.priv = dec;
-	switch (le16_to_cpu(id->idProduct)) {
+	switch (id->idProduct) {
 	case 0x1006:
 		dec->fe = ttusbdecfe_dvbs_attach(&fe_config);
 		break;
diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
index eb5eaec..443af24 100644
--- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
+++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
@@ -86,7 +86,7 @@
 		   0x00, 0x00, 0x00, 0xff,
 		   0x00, 0x00, 0x00, 0xff };
 
-	u32 freq = htonl(p->frequency / 1000);
+	__be32 freq = htonl(p->frequency / 1000);
 	memcpy(&b[4], &freq, sizeof (u32));
 	state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL);
 
@@ -117,10 +117,10 @@
 		   0x00, 0x00, 0x00, 0x00,
 		   0x00, 0x00, 0x00, 0x00,
 		   0x00, 0x00, 0x00, 0x00 };
-	u32 freq;
-	u32 sym_rate;
-	u32 band;
-	u32 lnb_voltage;
+	__be32 freq;
+	__be32 sym_rate;
+	__be32 band;
+	__be32 lnb_voltage;
 
 	freq = htonl(p->frequency +
 	       (state->hi_band ? LOF_HI : LOF_LO));
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index def10d0..52b2491 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -1,7 +1,7 @@
 
 config VIDEO_AU0828
 	tristate "Auvitek AU0828 support"
-	depends on VIDEO_DEV && I2C && INPUT && DVB_CORE && USB
+	depends on I2C && INPUT && DVB_CORE && USB
 	select I2C_ALGOBIT
 	select VIDEO_TVEEPROM
 	select DVB_AU8522 if !DVB_FE_CUSTOMIZE
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index c86a5f1..c6d4705 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -353,12 +353,6 @@
 		return -1;
 	}
 
-	/* Put the analog decoder in standby to keep it quiet */
-	au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL);
-
-	if (dvb->frontend->ops.analog_ops.standby)
-		dvb->frontend->ops.analog_ops.standby(dvb->frontend);
-
 	/* register everything */
 	ret = dvb_register(dev);
 	if (ret < 0) {
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f20a01c..8ef0424 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -34,6 +34,7 @@
 #include <linux/firmware.h>
 #include <net/checksum.h>
 
+#include <asm/unaligned.h>
 #include <asm/io.h>
 
 #include "bttvp.h"
@@ -3858,7 +3859,7 @@
 		ee += i;
 
 		/* found a valid descriptor */
-		type = be16_to_cpup((u16*)(ee+4));
+		type = get_unaligned_be16((__be16 *)(ee+4));
 
 		switch(type) {
 		/* 848 based */
@@ -3918,7 +3919,7 @@
 			       btv->c.nr, type);
 			break;
 		}
-		serial = be32_to_cpup((u32*)(ee+6));
+		serial = get_unaligned_be32((__be32 *)(ee+6));
 	}
 
 	printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index e5979f7..0af5868 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -48,7 +48,7 @@
 {
 	u32 instructions,line,todo;
 	struct scatterlist *sg;
-	u32 *rp;
+	__le32 *rp;
 	int rc;
 
 	/* estimate risc mem: worst case is one write per page border +
@@ -128,7 +128,8 @@
 		 unsigned int cpadding)
 {
 	unsigned int instructions,line,todo,ylen,chroma;
-	u32 *rp,ri;
+	__le32 *rp;
+	u32 ri;
 	struct scatterlist *ysg;
 	struct scatterlist *usg;
 	struct scatterlist *vsg;
@@ -244,7 +245,8 @@
 {
 	int dwords,rc,line,maxy,start,end,skip,nskips;
 	struct btcx_skiplist *skips;
-	u32 *rp,ri,ra;
+	__le32 *rp;
+	u32 ri,ra;
 	u32 addr;
 
 	/* skip list for window clipping */
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
index ce0840c..f42701f 100644
--- a/drivers/media/video/btcx-risc.c
+++ b/drivers/media/video/btcx-risc.c
@@ -63,7 +63,7 @@
 		       struct btcx_riscmem *risc,
 		       unsigned int size)
 {
-	u32 *cpu;
+	__le32 *cpu;
 	dma_addr_t dma;
 
 	if (NULL != risc->cpu && risc->size < size)
diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h
index 503e6c6..861bc81 100644
--- a/drivers/media/video/btcx-risc.h
+++ b/drivers/media/video/btcx-risc.h
@@ -2,8 +2,8 @@
  */
 struct btcx_riscmem {
 	unsigned int   size;
-	u32            *cpu;
-	u32            *jmp;
+	__le32         *cpu;
+	__le32         *jmp;
 	dma_addr_t     dma;
 };
 
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 6686490..9a26751 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -182,14 +182,16 @@
 		if (std == V4L2_STD_NTSC_M_JP) {
 			/* Japan uses EIAJ audio standard */
 			cx18_av_write(cx, 0x808, 0xf7);
+			cx18_av_write(cx, 0x80b, 0x02);
 		} else if (std == V4L2_STD_NTSC_M_KR) {
 			/* South Korea uses A2 audio standard */
 			cx18_av_write(cx, 0x808, 0xf8);
+			cx18_av_write(cx, 0x80b, 0x03);
 		} else {
 			/* Others use the BTSC audio standard */
 			cx18_av_write(cx, 0x808, 0xf6);
+			cx18_av_write(cx, 0x80b, 0x01);
 		}
-		cx18_av_write(cx, 0x80b, 0x00);
 	} else if (std & V4L2_STD_PAL) {
 		/* Follow tuner change procedure for PAL */
 		cx18_av_write(cx, 0x808, 0xff);
@@ -741,8 +743,8 @@
 {
 	struct cx18_av_state *state = &cx->av_state;
 	u8 download_ctl = cx18_av_read(cx, 0x803);
-	u8 mod_det_stat0 = cx18_av_read(cx, 0x805);
-	u8 mod_det_stat1 = cx18_av_read(cx, 0x804);
+	u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
+	u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
 	u8 audio_config = cx18_av_read(cx, 0x808);
 	u8 pref_mode = cx18_av_read(cx, 0x809);
 	u8 afc0 = cx18_av_read(cx, 0x80b);
@@ -760,12 +762,12 @@
 	case 0x12: p = "dual with SAP"; break;
 	case 0x14: p = "tri with SAP"; break;
 	case 0xfe: p = "forced mode"; break;
-	default: p = "not defined";
+	default: p = "not defined"; break;
 	}
 	CX18_INFO("Detected audio mode:       %s\n", p);
 
 	switch (mod_det_stat1) {
-	case 0x00: p = "BTSC"; break;
+	case 0x00: p = "not defined"; break;
 	case 0x01: p = "EIAJ"; break;
 	case 0x02: p = "A2-M"; break;
 	case 0x03: p = "A2-BG"; break;
@@ -779,8 +781,13 @@
 	case 0x0b: p = "NICAM-I"; break;
 	case 0x0c: p = "NICAM-L"; break;
 	case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
+	case 0x0e: p = "IF FM Radio"; break;
+	case 0x0f: p = "BTSC"; break;
+	case 0x10: p = "detected chrominance"; break;
+	case 0xfd: p = "unknown audio standard"; break;
+	case 0xfe: p = "forced audio standard"; break;
 	case 0xff: p = "no detected audio standard"; break;
-	default: p = "not defined";
+	default: p = "not defined"; break;
 	}
 	CX18_INFO("Detected audio standard:   %s\n", p);
 	CX18_INFO("Audio muted:               %s\n",
@@ -789,22 +796,23 @@
 		    (download_ctl & 0x10) ? "running" : "stopped");
 
 	switch (audio_config >> 4) {
-	case 0x00: p = "BTSC"; break;
-	case 0x01: p = "EIAJ"; break;
-	case 0x02: p = "A2-M"; break;
-	case 0x03: p = "A2-BG"; break;
-	case 0x04: p = "A2-DK1"; break;
-	case 0x05: p = "A2-DK2"; break;
-	case 0x06: p = "A2-DK3"; break;
-	case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
-	case 0x08: p = "AM-L"; break;
-	case 0x09: p = "NICAM-BG"; break;
-	case 0x0a: p = "NICAM-DK"; break;
-	case 0x0b: p = "NICAM-I"; break;
-	case 0x0c: p = "NICAM-L"; break;
-	case 0x0d: p = "FM radio"; break;
+	case 0x00: p = "undefined"; break;
+	case 0x01: p = "BTSC"; break;
+	case 0x02: p = "EIAJ"; break;
+	case 0x03: p = "A2-M"; break;
+	case 0x04: p = "A2-BG"; break;
+	case 0x05: p = "A2-DK1"; break;
+	case 0x06: p = "A2-DK2"; break;
+	case 0x07: p = "A2-DK3"; break;
+	case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
+	case 0x09: p = "AM-L"; break;
+	case 0x0a: p = "NICAM-BG"; break;
+	case 0x0b: p = "NICAM-DK"; break;
+	case 0x0c: p = "NICAM-I"; break;
+	case 0x0d: p = "NICAM-L"; break;
+	case 0x0e: p = "FM radio"; break;
 	case 0x0f: p = "automatic detection"; break;
-	default: p = "undefined";
+	default: p = "undefined"; break;
 	}
 	CX18_INFO("Configured audio standard: %s\n", p);
 
@@ -815,12 +823,9 @@
 		case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
 		case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
 		case 0x04: p = "STEREO"; break;
-		case 0x05: p = "DUAL1 (AB)"; break;
-		case 0x06: p = "DUAL2 (AC) (FM)"; break;
-		case 0x07: p = "DUAL3 (BC) (FM)"; break;
-		case 0x08: p = "DUAL4 (AC) (AM)"; break;
-		case 0x09: p = "DUAL5 (BC) (AM)"; break;
-		case 0x0a: p = "SAP"; break;
+		case 0x05: p = "DUAL1 (AC)"; break;
+		case 0x06: p = "DUAL2 (BC)"; break;
+		case 0x07: p = "DUAL3 (AB)"; break;
 		default: p = "undefined";
 		}
 		CX18_INFO("Configured audio mode:     %s\n", p);
@@ -835,9 +840,11 @@
 		case 0x06: p = "BTSC"; break;
 		case 0x07: p = "EIAJ"; break;
 		case 0x08: p = "A2-M"; break;
-		case 0x09: p = "FM Radio"; break;
+		case 0x09: p = "FM Radio (4.5 MHz)"; break;
+		case 0x0a: p = "FM Radio (5.5 MHz)"; break;
+		case 0x0b: p = "S-Video"; break;
 		case 0x0f: p = "automatic standard and mode detection"; break;
-		default: p = "undefined";
+		default: p = "undefined"; break;
 		}
 		CX18_INFO("Configured audio system:   %s\n", p);
 	}
@@ -857,22 +864,24 @@
 	case 5: p = "language AC"; break;
 	case 6: p = "language BC"; break;
 	case 7: p = "language AB"; break;
-	default: p = "undefined";
+	default: p = "undefined"; break;
 	}
 	CX18_INFO("Preferred audio mode:      %s\n", p);
 
 	if ((audio_config & 0xf) == 0xf) {
-		switch ((afc0 >> 2) & 0x1) {
+		switch ((afc0 >> 3) & 0x1) {
 		case 0: p = "system DK"; break;
 		case 1: p = "system L"; break;
 		}
 		CX18_INFO("Selected 65 MHz format:    %s\n", p);
 
-		switch (afc0 & 0x3) {
-		case 0: p = "BTSC"; break;
-		case 1: p = "EIAJ"; break;
-		case 2: p = "A2-M"; break;
-		default: p = "undefined";
+		switch (afc0 & 0x7) {
+		case 0: p = "Chroma"; break;
+		case 1: p = "BTSC"; break;
+		case 2: p = "EIAJ"; break;
+		case 3: p = "A2-M"; break;
+		case 4: p = "autodetect"; break;
+		default: p = "undefined"; break;
 		}
 		CX18_INFO("Selected 45 MHz format:    %s\n", p);
 	}
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 553adbf..baccd07 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -126,7 +126,7 @@
 
 /* ------------------------------------------------------------------------- */
 
-/* Compro VideoMate H900: not working at the moment! */
+/* Compro VideoMate H900: note that this card is analog only! */
 
 static const struct cx18_card_pci_info cx18_pci_h900[] = {
 	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 },
@@ -136,7 +136,7 @@
 static const struct cx18_card cx18_card_h900 = {
 	.type = CX18_CARD_COMPRO_H900,
 	.name = "Compro VideoMate H900",
-	.comment = "DVB & VBI are not yet supported\n",
+	.comment = "VBI is not yet supported\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_CX23418,
 	.hw_all = CX18_HW_TUNER,
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 2bdac5e..87cf410 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -159,7 +159,7 @@
 {
 	if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
 		return -EINVAL;
-	if (atomic_read(&cx->capturing) > 0)
+	if (atomic_read(&cx->ana_capturing) > 0)
 		return -EBUSY;
 
 	/* First try to allocate sliced VBI buffers if needed. */
@@ -235,7 +235,7 @@
 		CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n");
 		if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
 			struct cx2341x_mpeg_params p = cx->params;
-			int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd);
+			int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd);
 
 			if (err)
 				return err;
@@ -295,7 +295,7 @@
 		CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n");
 		if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
 			return cx2341x_ext_ctrls(&cx->params,
-					atomic_read(&cx->capturing), arg, cmd);
+					atomic_read(&cx->ana_capturing), arg, cmd);
 		return -EINVAL;
 	}
 
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 0dd4e05..2b810bb 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -670,7 +670,7 @@
 	cx18_init_power(cx, 1);
 	cx18_init_memory(cx);
 
-	cx->scb = (struct cx18_scb *)(cx->enc_mem + SCB_OFFSET);
+	cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
 	cx18_init_scb(cx);
 
 	cx18_gpio_init(cx);
@@ -751,17 +751,6 @@
 	if (cx->options.radio > 0)
 		cx->v4l2_cap |= V4L2_CAP_RADIO;
 
-	retval = cx18_streams_setup(cx);
-	if (retval) {
-		CX18_ERR("Error %d setting up streams\n", retval);
-		goto free_irq;
-	}
-	retval = cx18_streams_register(cx);
-	if (retval) {
-		CX18_ERR("Error %d registering devices\n", retval);
-		goto free_streams;
-	}
-
 	if (cx->options.tuner > -1) {
 		struct tuner_setup setup;
 
@@ -788,7 +777,16 @@
 	   are not. */
 	cx->tuner_std = cx->std;
 
-	cx18_init_on_first_open(cx);
+	retval = cx18_streams_setup(cx);
+	if (retval) {
+		CX18_ERR("Error %d setting up streams\n", retval);
+		goto free_irq;
+	}
+	retval = cx18_streams_register(cx);
+	if (retval) {
+		CX18_ERR("Error %d registering devices\n", retval);
+		goto free_streams;
+	}
 
 	CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name);
 
@@ -889,7 +887,7 @@
 
 	/* Stop all captures */
 	CX18_DEBUG_INFO("Stopping all streams\n");
-	if (atomic_read(&cx->capturing) > 0)
+	if (atomic_read(&cx->tot_capturing) > 0)
 		cx18_stop_all_captures(cx);
 
 	/* Interrupts */
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index a2a6c58..de14ab5 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -358,7 +358,7 @@
 	u32 v4l2_cap;		/* V4L2 capabilities of card */
 	u32 hw_flags; 		/* Hardware description of the board */
 	unsigned mdl_offset;
-	struct cx18_scb *scb;   /* pointer to SCB */
+	struct cx18_scb __iomem *scb;   /* pointer to SCB */
 
 	struct cx18_av_state av_state;
 
@@ -380,7 +380,8 @@
 	int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
 	struct cx18_stream streams[CX18_MAX_STREAMS]; 	/* Stream data */
 	unsigned long i_flags;  /* global cx18 flags */
-	atomic_t capturing;	/* count number of active capture streams */
+	atomic_t ana_capturing;	/* count number of active analog capture streams */
+	atomic_t tot_capturing;	/* total count number of active capture streams */
 	spinlock_t lock;        /* lock access to this struct */
 	int search_pack_header;
 
@@ -423,6 +424,10 @@
 	struct mutex i2c_bus_lock[2];
 	struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];
 
+	/* gpio */
+	u32 gpio_dir;
+	u32 gpio_val;
+
 	/* v4l2 and User settings */
 
 	/* codec settings */
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index 0b3141d..1e537fe 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -318,7 +318,7 @@
 	size_t tot_written = 0;
 	int single_frame = 0;
 
-	if (atomic_read(&cx->capturing) == 0 && s->id == -1) {
+	if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) {
 		/* shouldn't happen */
 		CX18_DEBUG_WARN("Stream %s not initialized before read\n",
 				s->name);
@@ -361,7 +361,8 @@
 				cx18_enqueue(s, buf, &s->q_free);
 				cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5,
 					s->handle,
-					(void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+					(void __iomem *)&cx->scb->cpu_mdl[buf->id] -
+					  cx->enc_mem,
 					1, buf->id, s->buf_size);
 			} else
 				cx18_enqueue(s, buf, &s->q_io);
@@ -581,7 +582,7 @@
 		cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std);
 		/* Select correct audio input (i.e. TV tuner or Line in) */
 		cx18_audio_set_io(cx);
-		if (atomic_read(&cx->capturing) > 0) {
+		if (atomic_read(&cx->ana_capturing) > 0) {
 			/* Undo video mute */
 			cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
 				cx->params.video_mute |
@@ -627,7 +628,7 @@
 		}
 
 		if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
-			if (atomic_read(&cx->capturing) > 0) {
+			if (atomic_read(&cx->ana_capturing) > 0) {
 				/* switching to radio while capture is
 				   in progress is not polite */
 				cx18_release_stream(s);
@@ -694,7 +695,7 @@
 
 void cx18_mute(struct cx18 *cx)
 {
-	if (atomic_read(&cx->capturing))
+	if (atomic_read(&cx->ana_capturing))
 		cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2,
 				cx18_find_handle(cx), 1);
 	CX18_DEBUG_INFO("Mute\n");
@@ -702,7 +703,7 @@
 
 void cx18_unmute(struct cx18 *cx)
 {
-	if (atomic_read(&cx->capturing)) {
+	if (atomic_read(&cx->ana_capturing)) {
 		cx18_msleep_timeout(100, 0);
 		cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
 				cx18_find_handle(cx), 12);
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index bb8bc86..ceb6365 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -35,9 +35,6 @@
 #define CX18_REG_GPIO_OUT2   0xc78104
 #define CX18_REG_GPIO_DIR2   0xc7810c
 
-static u32 gpio_dir;
-static u32 gpio_val;
-
 /*
  * HVR-1600 GPIO pins, courtesy of Hauppauge:
  *
@@ -49,25 +46,30 @@
 
 static void gpio_write(struct cx18 *cx)
 {
-	write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
-	write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff),
+	u32 dir = cx->gpio_dir;
+	u32 val = cx->gpio_val;
+
+	write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
+	write_reg(((dir & 0xffff) << 16) | (val & 0xffff),
 			CX18_REG_GPIO_OUT1);
-	write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2);
-	write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16),
+	write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2);
+	write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
 			CX18_REG_GPIO_OUT2);
 }
 
 void cx18_gpio_init(struct cx18 *cx)
 {
-	gpio_dir = cx->card->gpio_init.direction;
-	gpio_val = cx->card->gpio_init.initial_value;
+	cx->gpio_dir = cx->card->gpio_init.direction;
+	cx->gpio_val = cx->card->gpio_init.initial_value;
 
-	if (gpio_dir == 0)
+	if (cx->card->tuners[0].tuner == TUNER_XC2028) {
+		cx->gpio_dir |= 1 << cx->card->xceive_pin;
+		cx->gpio_val |= 1 << cx->card->xceive_pin;
+	}
+
+	if (cx->gpio_dir == 0)
 		return;
 
-	gpio_dir |= 1 << cx->card->xceive_pin;
-	gpio_val |= 1 << cx->card->xceive_pin;
-
 	CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n",
 		   read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2),
 		   read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2));
@@ -86,13 +88,12 @@
 		return 0;
 	CX18_DEBUG_INFO("Resetting tuner\n");
 
-	gpio_dir |= 1 << cx->card->xceive_pin;
-	gpio_val &= ~(1 << cx->card->xceive_pin);
+	cx->gpio_val &= ~(1 << cx->card->xceive_pin);
 
 	gpio_write(cx);
 	schedule_timeout_interruptible(msecs_to_jiffies(1));
 
-	gpio_val |= 1 << cx->card->xceive_pin;
+	cx->gpio_val |= 1 << cx->card->xceive_pin;
 	gpio_write(cx);
 	schedule_timeout_interruptible(msecs_to_jiffies(1));
 	return 0;
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index dbdcb86..4151f1e 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -247,7 +247,7 @@
 
 		if (!set_fmt || (cx->params.width == w && cx->params.height == h))
 			return 0;
-		if (atomic_read(&cx->capturing) > 0)
+		if (atomic_read(&cx->ana_capturing) > 0)
 			return -EBUSY;
 
 		cx->params.width = w;
@@ -264,7 +264,7 @@
 	if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
 		if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI &&
 		    cx->vbi.sliced_in->service_set &&
-		    atomic_read(&cx->capturing) > 0)
+		    atomic_read(&cx->ana_capturing) > 0)
 			return -EBUSY;
 		if (set_fmt) {
 			cx->vbi.sliced_in->service_set = 0;
@@ -293,7 +293,7 @@
 		return 0;
 	if (set == 0)
 		return -EINVAL;
-	if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
+	if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
 		return -EBUSY;
 	cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
 	memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in));
@@ -581,7 +581,7 @@
 			break;
 
 		if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ||
-		    atomic_read(&cx->capturing) > 0) {
+		    atomic_read(&cx->ana_capturing) > 0) {
 			/* Switching standard would turn off the radio or mess
 			   with already running streams, prevent that by
 			   returning EBUSY. */
@@ -677,7 +677,7 @@
 			enc->flags = 0;
 			if (try)
 				return 0;
-			if (!atomic_read(&cx->capturing))
+			if (!atomic_read(&cx->ana_capturing))
 				return -EPERM;
 			if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
 				return 0;
@@ -689,7 +689,7 @@
 			enc->flags = 0;
 			if (try)
 				return 0;
-			if (!atomic_read(&cx->capturing))
+			if (!atomic_read(&cx->ana_capturing))
 				return -EPERM;
 			if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
 				return 0;
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index 6e14f8b..25114a5 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -75,7 +75,7 @@
 
 			cx18_buf_sync_for_device(s, buf);
 			cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
-			    (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+			    (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
 			    1, buf->id, s->buf_size);
 		} else
 			set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
@@ -161,13 +161,15 @@
 	*/
 
 	if (sw2) {
-		if (sw2 & (cx->scb->cpu2hpu_irq_ack | cx->scb->cpu2epu_irq_ack))
+		if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) |
+			   readl(&cx->scb->cpu2epu_irq_ack)))
 			wake_up(&cx->mb_cpu_waitq);
-		if (sw2 & (cx->scb->apu2hpu_irq_ack | cx->scb->apu2epu_irq_ack))
+		if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) |
+			   readl(&cx->scb->apu2epu_irq_ack)))
 			wake_up(&cx->mb_apu_waitq);
-		if (sw2 & cx->scb->epu2hpu_irq_ack)
+		if (sw2 & readl(&cx->scb->epu2hpu_irq_ack))
 			wake_up(&cx->mb_epu_waitq);
-		if (sw2 & cx->scb->hpu2epu_irq_ack)
+		if (sw2 & readl(&cx->scb->hpu2epu_irq_ack))
 			wake_up(&cx->mb_hpu_waitq);
 	}
 
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 0c5f328..2a5ccef 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -94,10 +94,10 @@
 	return NULL;
 }
 
-static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu,
+static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu,
 		u32 *state, u32 *irq, u32 *req)
 {
-	struct cx18_mailbox *mb = NULL;
+	struct cx18_mailbox __iomem *mb = NULL;
 	int wait_count = 0;
 	u32 ack;
 
@@ -142,7 +142,7 @@
 long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
 {
 	const struct cx18_api_info *info = find_api_info(mb->cmd);
-	struct cx18_mailbox *ack_mb;
+	struct cx18_mailbox __iomem *ack_mb;
 	u32 ack_irq;
 	u8 rpu = CPU;
 
@@ -182,7 +182,7 @@
 {
 	const struct cx18_api_info *info = find_api_info(cmd);
 	u32 state = 0, irq = 0, req, oldreq, err;
-	struct cx18_mailbox *mb;
+	struct cx18_mailbox __iomem *mb;
 	wait_queue_head_t *waitq;
 	int timeout = 100;
 	int cnt = 0;
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 4ca9d84..1b921a3 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -36,12 +36,13 @@
 #define CX18_DSP0_INTERRUPT_MASK     	0xd0004C
 
 static struct file_operations cx18_v4l2_enc_fops = {
-      .owner = THIS_MODULE,
-      .read = cx18_v4l2_read,
-      .open = cx18_v4l2_open,
-      .ioctl = cx18_v4l2_ioctl,
-      .release = cx18_v4l2_close,
-      .poll = cx18_v4l2_enc_poll,
+	.owner = THIS_MODULE,
+	.read = cx18_v4l2_read,
+	.open = cx18_v4l2_open,
+	.ioctl = cx18_v4l2_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.release = cx18_v4l2_close,
+	.poll = cx18_v4l2_enc_poll,
 };
 
 /* offset from 0 to register ts v4l2 minors on */
@@ -443,7 +444,7 @@
 	s->handle = data[0];
 	cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
 
-	if (atomic_read(&cx->capturing) == 0 && !ts) {
+	if (atomic_read(&cx->ana_capturing) == 0 && !ts) {
 		/* Stuff from Windows, we don't know what it is */
 		cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
 		cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
@@ -466,14 +467,14 @@
 		cx2341x_update(cx, cx18_api_func, NULL, &cx->params);
 	}
 
-	if (atomic_read(&cx->capturing) == 0) {
+	if (atomic_read(&cx->tot_capturing) == 0) {
 		clear_bit(CX18_F_I_EOS, &cx->i_flags);
 		write_reg(7, CX18_DSP0_INTERRUPT_MASK);
 	}
 
 	cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
-		(void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
-		(void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
+		(void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
+		(void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
 
 	list_for_each(p, &s->q_free.list) {
 		struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list);
@@ -481,8 +482,8 @@
 		writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr);
 		writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
 		cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
-			(void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1,
-			buf->id, s->buf_size);
+			(void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+			1, buf->id, s->buf_size);
 	}
 	/* begin_capture */
 	if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
@@ -492,7 +493,9 @@
 	}
 
 	/* you're live! sit back and await interrupts :) */
-	atomic_inc(&cx->capturing);
+	if (!ts)
+		atomic_inc(&cx->ana_capturing);
+	atomic_inc(&cx->tot_capturing);
 	return 0;
 }
 
@@ -523,7 +526,7 @@
 
 	CX18_DEBUG_INFO("Stop Capture\n");
 
-	if (atomic_read(&cx->capturing) == 0)
+	if (atomic_read(&cx->tot_capturing) == 0)
 		return 0;
 
 	if (s->type == CX18_ENC_STREAM_TYPE_MPG)
@@ -537,7 +540,9 @@
 		CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
 	}
 
-	atomic_dec(&cx->capturing);
+	if (s->type != CX18_ENC_STREAM_TYPE_TS)
+		atomic_dec(&cx->ana_capturing);
+	atomic_dec(&cx->tot_capturing);
 
 	/* Clear capture and no-read bits */
 	clear_bit(CX18_F_S_STREAMING, &s->s_flags);
@@ -545,7 +550,7 @@
 	cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
 	s->handle = 0xffffffff;
 
-	if (atomic_read(&cx->capturing) > 0)
+	if (atomic_read(&cx->tot_capturing) > 0)
 		return 0;
 
 	write_reg(5, CX18_DSP0_INTERRUPT_MASK);
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index f24abcd..c4cc2f3 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -823,7 +823,7 @@
 	iounmap(dev->lmmio);
 }
 
-static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
 			       unsigned int offset, u32 sync_line,
 			       unsigned int bpl, unsigned int padding,
 			       unsigned int lines)
@@ -883,7 +883,7 @@
 			unsigned int padding, unsigned int lines)
 {
 	u32 instructions, fields;
-	u32 *rp;
+	__le32 *rp;
 	int rc;
 
 	fields = 0;
@@ -924,7 +924,7 @@
 				   unsigned int lines)
 {
 	u32 instructions;
-	u32 *rp;
+	__le32 *rp;
 	int rc;
 
 	/* estimate risc mem: worst case is one write per page border +
@@ -951,7 +951,7 @@
 int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
 				u32 reg, u32 mask, u32 value)
 {
-	u32 *rp;
+	__le32 *rp;
 	int rc;
 
 	if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index aeba26d..fa6d398 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1493,10 +1493,16 @@
 		},
 	},
 	[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
-		.name           = "PowerColor Real Angel 330",
+		.name           = "PowerColor RA330",	/* Long names may confuse LIRC. */
 		.tuner_type     = TUNER_XC2028,
 		.tuner_addr     = 0x61,
 		.input          = { {
+			.type   = CX88_VMUX_DEBUG,
+			.vmux   = 3,		/* Due to the way the cx88 driver is written,	*/
+			.gpio0 = 0x00ff,	/* there is no way to deactivate audio pass-	*/
+			.gpio1 = 0xf39d,	/* through without this entry. Furthermore, if	*/
+			.gpio3 = 0x0000,	/* the TV mux entry is first, you get audio	*/
+		}, {				/* from the tuner on boot for a little while.	*/
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
 			.gpio0 = 0x00ff,
@@ -2424,8 +2430,9 @@
 
 	switch (core->boardnr) {
 	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
-		/* Doesn't work with firmware version 2.7 */
-		ctl->fname = "xc3028-v25.fw";
+		/* Now works with firmware version 2.7 */
+		if (core->i2c_algo.udelay < 16)
+			core->i2c_algo.udelay = 16;
 		break;
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
 		ctl->scode_table = XC3028_FE_ZARLINK456;
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index c4d1aff..60eeda3 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -70,7 +70,7 @@
 
 /* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be
 	 generated _after_ lpi lines are transferred. */
-static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist,
 			    unsigned int offset, u32 sync_line,
 			    unsigned int bpl, unsigned int padding,
 			    unsigned int lines, unsigned int lpi)
@@ -130,7 +130,7 @@
 		     unsigned int bpl, unsigned int padding, unsigned int lines)
 {
 	u32 instructions,fields;
-	u32 *rp;
+	__le32 *rp;
 	int rc;
 
 	fields = 0;
@@ -168,7 +168,7 @@
 			 unsigned int lines, unsigned int lpi)
 {
 	u32 instructions;
-	u32 *rp;
+	__le32 *rp;
 	int rc;
 
 	/* estimate risc mem: worst case is one write per page border +
@@ -193,7 +193,7 @@
 int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
 		      u32 reg, u32 mask, u32 value)
 {
-	u32 *rp;
+	__le32 *rp;
 	int rc;
 
 	if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8996175..fb163ec 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1166,13 +1166,13 @@
 
 		reg->val = ret;
 	} else {
-		u64 val = 0;
+		__le64 val = 0;
 		ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
 						   reg->reg, (char *)&val, 2);
 		if (ret < 0)
 			return ret;
 
-		reg->val = cpu_to_le64((__u64)val);
+		reg->val = le64_to_cpu(val);
 	}
 
 	return 0;
@@ -1183,9 +1183,9 @@
 {
 	struct em28xx_fh      *fh  = priv;
 	struct em28xx         *dev = fh->dev;
-	u64 buf;
+	__le64 buf;
 
-	buf = le64_to_cpu((__u64)reg->val);
+	buf = cpu_to_le64(reg->val);
 
 	return em28xx_write_regs(dev, reg->reg, (char *)&buf,
 				 em28xx_reg_len(reg->reg));
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index ba06e81..9d23b1e 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -259,6 +259,12 @@
 
 /* Scatter-Gather array element, used in DMA transfers */
 struct ivtv_sg_element {
+	__le32 src;
+	__le32 dst;
+	__le32 size;
+};
+
+struct ivtv_sg_host_element {
 	u32 src;
 	u32 dst;
 	u32 size;
@@ -349,8 +355,8 @@
 	u16 dma_xfer_cnt;
 
 	/* Base Dev SG Array for cx23415/6 */
-	struct ivtv_sg_element *sg_pending;
-	struct ivtv_sg_element *sg_processing;
+	struct ivtv_sg_host_element *sg_pending;
+	struct ivtv_sg_host_element *sg_processing;
 	struct ivtv_sg_element *sg_dma;
 	dma_addr_t sg_handle;
 	int sg_pending_size;
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index f2fa434..db813e0 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -587,7 +587,7 @@
 	since we may get here before the stream has been fully set-up */
 	if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) {
 		while (count >= itv->dma_data_req_size) {
-			if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) {
+			if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) {
 				bytes_written += itv->dma_data_req_size;
 				user_buf += itv->dma_data_req_size;
 				count -= itv->dma_data_req_size;
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index d8ba3a4..fba150a 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -231,14 +231,14 @@
 	struct ivtv_buffer *buf = NULL;
 	struct list_head *p;
 	u32 offset;
-	u32 *u32buf;
+	__le32 *u32buf;
 	int x = 0;
 
 	IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA",
 			s->name, s->dma_offset);
 	list_for_each(p, &s->q_dma.list) {
 		buf = list_entry(p, struct ivtv_buffer, list);
-		u32buf = (u32 *)buf->buf;
+		u32buf = (__le32 *)buf->buf;
 
 		/* Sync Buffer */
 		ivtv_buf_sync_for_cpu(s, buf);
@@ -444,7 +444,7 @@
 	}
 
 	s->dma_xfer_cnt++;
-	memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+	memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
 	s->sg_processing_size = s->sg_pending_size;
 	s->sg_pending_size = 0;
 	s->sg_processed = 0;
@@ -473,7 +473,7 @@
 	if (s->q_predma.bytesused)
 		ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
 	s->dma_xfer_cnt++;
-	memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+	memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
 	s->sg_processing_size = s->sg_pending_size;
 	s->sg_pending_size = 0;
 	s->sg_processed = 0;
diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c
index fc8b1ea..71bd13e 100644
--- a/drivers/media/video/ivtv/ivtv-queue.c
+++ b/drivers/media/video/ivtv/ivtv-queue.c
@@ -193,7 +193,7 @@
 int ivtv_stream_alloc(struct ivtv_stream *s)
 {
 	struct ivtv *itv = s->itv;
-	int SGsize = sizeof(struct ivtv_sg_element) * s->buffers;
+	int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers;
 	int i;
 
 	if (s->buffers == 0)
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index c47c2b9..c854285 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -44,23 +44,25 @@
 #include "ivtv-streams.h"
 
 static const struct file_operations ivtv_v4l2_enc_fops = {
-      .owner = THIS_MODULE,
-      .read = ivtv_v4l2_read,
-      .write = ivtv_v4l2_write,
-      .open = ivtv_v4l2_open,
-      .ioctl = ivtv_v4l2_ioctl,
-      .release = ivtv_v4l2_close,
-      .poll = ivtv_v4l2_enc_poll,
+	.owner = THIS_MODULE,
+	.read = ivtv_v4l2_read,
+	.write = ivtv_v4l2_write,
+	.open = ivtv_v4l2_open,
+	.ioctl = ivtv_v4l2_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.release = ivtv_v4l2_close,
+	.poll = ivtv_v4l2_enc_poll,
 };
 
 static const struct file_operations ivtv_v4l2_dec_fops = {
-      .owner = THIS_MODULE,
-      .read = ivtv_v4l2_read,
-      .write = ivtv_v4l2_write,
-      .open = ivtv_v4l2_open,
-      .ioctl = ivtv_v4l2_ioctl,
-      .release = ivtv_v4l2_close,
-      .poll = ivtv_v4l2_dec_poll,
+	.owner = THIS_MODULE,
+	.read = ivtv_v4l2_read,
+	.write = ivtv_v4l2_write,
+	.open = ivtv_v4l2_open,
+	.ioctl = ivtv_v4l2_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.release = ivtv_v4l2_close,
+	.poll = ivtv_v4l2_dec_poll,
 };
 
 #define IVTV_V4L2_DEC_MPG_OFFSET  16	/* offset from 0 to register decoder mpg v4l2 minors on */
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index 02c5ab0..442f43f 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -22,8 +22,8 @@
 
 #define IVTV_DRIVER_NAME "ivtv"
 #define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 2
-#define IVTV_DRIVER_VERSION_PATCHLEVEL 1
+#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
 
 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
 #define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c
index a9417f6..3092ff1 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.c
+++ b/drivers/media/video/ivtv/ivtv-yuv.c
@@ -1116,7 +1116,7 @@
 }
 
 /* Attempt to dma a frame from a user buffer */
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src)
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src)
 {
 	struct yuv_playback_info *yi = &itv->yuv_info;
 	struct ivtv_dma_frame dma_args;
diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h
index 2fe5f12..ca5173f 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.h
+++ b/drivers/media/video/ivtv/ivtv-yuv.h
@@ -35,7 +35,7 @@
 
 int ivtv_yuv_filter_check(struct ivtv *itv);
 void ivtv_yuv_setup_stream_frame(struct ivtv *itv);
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src);
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src);
 void ivtv_yuv_frame_complete(struct ivtv *itv);
 int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args);
 void ivtv_yuv_close(struct ivtv *itv);
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 1314522..81431ee 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -163,8 +163,7 @@
 static int empress_querycap(struct file *file, void  *priv,
 					struct v4l2_capability *cap)
 {
-	struct saa7134_fh *fh = priv;
-	struct saa7134_dev *dev = fh->dev;
+	struct saa7134_dev *dev = file->private_data;
 
 	strcpy(cap->driver, "saa7134");
 	strlcpy(cap->card, saa7134_boards[dev->board].name,
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 198f0af..0d12ace 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -92,6 +92,7 @@
 	unsigned int        type; /* chip type id */
 	unsigned int        config;
 	int (*tuner_callback) (void *dev, int command, int arg);
+	const char          *name;
 };
 
 /* standard i2c insmod options */
@@ -330,13 +331,13 @@
 	tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n");
 	tuner_warn("will soon be dropped. This message indicates that your\n");
 	tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n",
-		   t->i2c->name, t->i2c->addr);
+		   t->name, t->i2c->addr);
 	tuner_warn("To ensure continued support for your device, please\n");
 	tuner_warn("send a copy of this message, along with full dmesg\n");
 	tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n");
 	tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n");
 	tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n",
-		   t->i2c->adapter->name, t->i2c->addr, t->type, t->i2c->name);
+		   t->i2c->adapter->name, t->i2c->addr, t->type, t->name);
 	tuner_warn("====================== WARNING! ======================\n");
 }
 
@@ -470,19 +471,17 @@
 	if ((NULL == analog_ops->set_params) &&
 	    (fe_tuner_ops->set_analog_params)) {
 
-		strlcpy(t->i2c->name, fe_tuner_ops->info.name,
-			sizeof(t->i2c->name));
+		t->name = fe_tuner_ops->info.name;
 
 		t->fe.analog_demod_priv = t;
 		memcpy(analog_ops, &tuner_core_ops,
 		       sizeof(struct analog_demod_ops));
 
 	} else {
-		strlcpy(t->i2c->name, analog_ops->info.name,
-			sizeof(t->i2c->name));
+		t->name = analog_ops->info.name;
 	}
 
-	tuner_dbg("type set to %s\n", t->i2c->name);
+	tuner_dbg("type set to %s\n", t->name);
 
 	if (t->mode_mask == T_UNINITIALIZED)
 		t->mode_mask = new_mode_mask;
@@ -537,7 +536,7 @@
 static inline int check_mode(struct tuner *t, char *cmd)
 {
 	if ((1 << t->mode & t->mode_mask) == 0) {
-		return EINVAL;
+		return -EINVAL;
 	}
 
 	switch (t->mode) {
@@ -731,11 +730,11 @@
 
 	t->mode = mode;
 
-	if (check_mode(t, cmd) == EINVAL) {
+	if (check_mode(t, cmd) == -EINVAL) {
 		t->mode = T_STANDBY;
 		if (analog_ops->standby)
 			analog_ops->standby(&t->fe);
-		return EINVAL;
+		return -EINVAL;
 	}
 	return 0;
 }
@@ -777,13 +776,13 @@
 		break;
 	case AUDC_SET_RADIO:
 		if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO")
-				== EINVAL)
+				== -EINVAL)
 			return 0;
 		if (t->radio_freq)
 			set_freq(client, t->radio_freq);
 		break;
 	case TUNER_SET_STANDBY:
-		if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL)
+		if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL)
 			return 0;
 		t->mode = T_STANDBY;
 		if (analog_ops->standby)
@@ -791,9 +790,9 @@
 		break;
 #ifdef CONFIG_VIDEO_ALLOW_V4L1
 	case VIDIOCSAUDIO:
-		if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+		if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL)
 			return 0;
-		if (check_v4l2(t) == EINVAL)
+		if (check_v4l2(t) == -EINVAL)
 			return 0;
 
 		/* Should be implemented, since bttv calls it */
@@ -811,10 +810,10 @@
 			};
 			struct video_channel *vc = arg;
 
-			if (check_v4l2(t) == EINVAL)
+			if (check_v4l2(t) == -EINVAL)
 				return 0;
 
-			if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL)
+			if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL)
 				return 0;
 
 			if (vc->norm < ARRAY_SIZE(map))
@@ -828,9 +827,9 @@
 		{
 			unsigned long *v = arg;
 
-			if (check_mode(t, "VIDIOCSFREQ") == EINVAL)
+			if (check_mode(t, "VIDIOCSFREQ") == -EINVAL)
 				return 0;
-			if (check_v4l2(t) == EINVAL)
+			if (check_v4l2(t) == -EINVAL)
 				return 0;
 
 			set_freq(client, *v);
@@ -840,9 +839,9 @@
 		{
 			struct video_tuner *vt = arg;
 
-			if (check_mode(t, "VIDIOCGTUNER") == EINVAL)
+			if (check_mode(t, "VIDIOCGTUNER") == -EINVAL)
 				return 0;
-			if (check_v4l2(t) == EINVAL)
+			if (check_v4l2(t) == -EINVAL)
 				return 0;
 
 			if (V4L2_TUNER_RADIO == t->mode) {
@@ -884,9 +883,9 @@
 		{
 			struct video_audio *va = arg;
 
-			if (check_mode(t, "VIDIOCGAUDIO") == EINVAL)
+			if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL)
 				return 0;
-			if (check_v4l2(t) == EINVAL)
+			if (check_v4l2(t) == -EINVAL)
 				return 0;
 
 			if (V4L2_TUNER_RADIO == t->mode) {
@@ -926,7 +925,7 @@
 			v4l2_std_id *id = arg;
 
 			if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD")
-					== EINVAL)
+					== -EINVAL)
 				return 0;
 
 			switch_v4l2();
@@ -942,7 +941,7 @@
 			struct v4l2_frequency *f = arg;
 
 			if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
-					== EINVAL)
+					== -EINVAL)
 				return 0;
 			switch_v4l2();
 			set_freq(client,f->frequency);
@@ -953,7 +952,7 @@
 		{
 			struct v4l2_frequency *f = arg;
 
-			if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL)
+			if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL)
 				return 0;
 			switch_v4l2();
 			f->type = t->mode;
@@ -974,7 +973,7 @@
 		{
 			struct v4l2_tuner *tuner = arg;
 
-			if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL)
+			if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL)
 				return 0;
 			switch_v4l2();
 
@@ -1021,7 +1020,7 @@
 		{
 			struct v4l2_tuner *tuner = arg;
 
-			if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL)
+			if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL)
 				return 0;
 
 			switch_v4l2();
@@ -1115,6 +1114,7 @@
 	if (NULL == t)
 		return -ENOMEM;
 	t->i2c = client;
+	t->name = "(tuner unset)";
 	i2c_set_clientdata(client, t);
 	t->type = UNSET;
 	t->audmode = V4L2_TUNER_MODE_STEREO;
@@ -1272,12 +1272,6 @@
 
 	list_del(&t->list);
 	kfree(t);
-
-	/* The probing code has overwritten the device name, restore it so
-	   that reloading the driver will work. Ideally the device name
-	   should not be overwritten in the first place, but for now that
-	   will do. */
-	strlcpy(client->name, "tuner", I2C_NAME_SIZE);
 	return 0;
 }
 
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index 32e536e..3d26a30 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -210,7 +210,7 @@
 	return ret;
 }
 
-static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val)
+static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val)
 {
 	int ret;
 
diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h
index 81cc3b0..46b7ad4 100644
--- a/drivers/media/video/zoran.h
+++ b/drivers/media/video/zoran.h
@@ -285,7 +285,7 @@
 
 struct zoran_jpg_buffer {
 	struct zoran_mapping *map;
-	u32 *frag_tab;		/* addresses of frag table */
+	__le32 *frag_tab;		/* addresses of frag table */
 	u32 frag_tab_bus;	/* same value cached to save time in ISR */
 	enum zoran_buffer_state state;	/* non-zero if corresponding buffer is in use in grab queue */
 	struct zoran_sync bs;	/* DONE: info to return to application */
@@ -450,7 +450,7 @@
 	unsigned long jpg_queued_num;	/* count of frames queued since grab/play started */
 
 	/* zr36057's code buffer table */
-	u32 *stat_com;		/* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
+	__le32 *stat_com;		/* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
 
 	/* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */
 	int jpg_pend[BUZ_MAX_FRAME];
diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c
index 37629ff..88d3697 100644
--- a/drivers/media/video/zoran_device.c
+++ b/drivers/media/video/zoran_device.c
@@ -1320,7 +1320,7 @@
 			if (i) {
 				/* Rotate stat_comm entries to make current entry first */
 				int j;
-				u32 bus_addr[BUZ_NUM_STAT_COM];
+				__le32 bus_addr[BUZ_NUM_STAT_COM];
 
 				/* Here we are copying the stat_com array, which
 				 * is already in little endian format, so
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index 345c77e..5394d7a 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -495,7 +495,7 @@
 			jpg_fbuffer_free(file);
 			return -ENOBUFS;
 		}
-		fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem;
+		fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem;
 		fh->jpg_buffers.buffer[i].frag_tab_bus =
 		    virt_to_bus((void *) mem);
 
@@ -1167,7 +1167,7 @@
 
 	/* v4l capture */
 	if (fh->v4l_buffers.active != ZORAN_FREE) {
-		long flags;
+		unsigned long flags;
 
 		spin_lock_irqsave(&zr->spinlock, flags);
 		zr36057_set_memgrab(zr, 0);
@@ -3436,7 +3436,7 @@
 
 			/* unload capture */
 			if (zr->v4l_memgrab_active) {
-				long flags;
+				unsigned long flags;
 
 				spin_lock_irqsave(&zr->spinlock, flags);
 				zr36057_set_memgrab(zr, 0);
@@ -4375,7 +4375,7 @@
 				mutex_lock(&zr->resource_lock);
 
 				if (fh->v4l_buffers.active != ZORAN_FREE) {
-					long flags;
+					unsigned long flags;
 
 					spin_lock_irqsave(&zr->spinlock, flags);
 					zr36057_set_memgrab(zr, 0);
@@ -4506,7 +4506,7 @@
 				if (todo > fraglen)
 					todo = fraglen;
 				pos =
-				    le32_to_cpu((unsigned long) fh->jpg_buffers.
+				    le32_to_cpu(fh->jpg_buffers.
 				    buffer[i].frag_tab[2 * j]);
 				/* should just be pos on i386 */
 				page = virt_to_phys(bus_to_virt(pos))
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 3cdd4e9..1e24ab4 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1238,8 +1238,6 @@
 	sh->max_id = ioc->pfacts->MaxDevices;
 	sh->max_lun = max_lun;
 
-	sh->this_id = ioc->pfacts[0].PortSCSIID;
-
 	/* Required entry.
 	 */
 	sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4684807..4d492ba 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3193,8 +3193,6 @@
 
 	sh->transportt = mptsas_transport_template;
 
-	sh->this_id = ioc->pfacts[0].PortSCSIID;
-
 	/* Required entry.
 	 */
 	sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b109bd8..c68ef00 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2451,12 +2451,6 @@
 		    ioc->name, sdev->sdtr, sdev->wdtr,
 		    sdev->ppr, sdev->inquiry_len));
 
-	if (sdev->id > sh->max_id) {
-		/* error case, should never happen */
-		scsi_adjust_queue_depth(sdev, 0, 1);
-		goto slave_configure_exit;
-	}
-
 	vdevice->configured_lun = 1;
 	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 
@@ -2470,8 +2464,6 @@
 		    ioc->name, vtarget->negoFlags, vtarget->maxOffset,
 		    vtarget->minSyncFactor));
 
-slave_configure_exit:
-
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"tagged %d, simple %d, ordered %d\n",
 		ioc->name,sdev->tagged_supported, sdev->simple_tags,
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index e2e7c05..6d14e8f 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -352,3 +352,9 @@
 MODULE_DESCRIPTION("Fujitsu laptop extras support");
 MODULE_VERSION(FUJITSU_DRIVER_VERSION);
 MODULE_LICENSE("GPL");
+
+static struct pnp_device_id pnp_ids[] = {
+	{ .id = "FUJ02bf" },
+	{ .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, pnp_ids);
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index fa39410..e4ff50b 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -102,7 +102,6 @@
 #include <linux/nmi.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
-#include <linux/delay.h>
 
 #define v1printk(a...) do { \
 	if (verbose) \
@@ -119,7 +118,6 @@
 	} while (0)
 #define MAX_CONFIG_LEN		40
 
-static const char hexchars[] = "0123456789abcdef";
 static struct kgdb_io kgdbts_io_ops;
 static char get_buf[BUFMAX];
 static int get_buf_cnt;
@@ -131,6 +129,8 @@
 static int test_complete;
 static int send_ack;
 static int final_ack;
+static int force_hwbrks;
+static int hwbreaks_ok;
 static int hw_break_val;
 static int hw_break_val2;
 #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
@@ -234,12 +234,12 @@
 
 static void sw_break(char *arg)
 {
-	break_helper("Z0", arg, 0);
+	break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0);
 }
 
 static void sw_rem_break(char *arg)
 {
-	break_helper("z0", arg, 0);
+	break_helper(force_hwbrks ? "z1" : "z0", arg, 0);
 }
 
 static void hw_break(char *arg)
@@ -619,8 +619,8 @@
 		count++;
 	}
 	strcat(get_buf, "#");
-	get_buf[count + 2] = hexchars[checksum >> 4];
-	get_buf[count + 3] = hexchars[checksum & 0xf];
+	get_buf[count + 2] = hex_asc_hi(checksum);
+	get_buf[count + 3] = hex_asc_lo(checksum);
 	get_buf[count + 4] = '\0';
 	v2printk("get%i: %s\n", ts.idx, get_buf);
 }
@@ -781,6 +781,8 @@
 		return;
 
 	eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+	if (is_hw_breakpoint)
+		hwbreaks_ok = 0;
 }
 
 static void run_hw_break_test(int is_write_test)
@@ -798,9 +800,11 @@
 	kgdb_breakpoint();
 	hw_break_val_access();
 	if (is_write_test) {
-		if (test_complete == 2)
+		if (test_complete == 2) {
 			eprintk("kgdbts: ERROR %s broke on access\n",
 				ts.name);
+			hwbreaks_ok = 0;
+		}
 		hw_break_val_write();
 	}
 	kgdb_breakpoint();
@@ -809,6 +813,7 @@
 		return;
 
 	eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+	hwbreaks_ok = 0;
 }
 
 static void run_nmi_sleep_test(int nmi_sleep)
@@ -912,6 +917,7 @@
 
 	/* All HW break point tests */
 	if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+		hwbreaks_ok = 1;
 		v1printk("kgdbts:RUN hw breakpoint test\n");
 		run_breakpoint_test(1);
 		v1printk("kgdbts:RUN hw write breakpoint test\n");
@@ -925,6 +931,19 @@
 		run_nmi_sleep_test(nmi_sleep);
 	}
 
+#ifdef CONFIG_DEBUG_RODATA
+	/* Until there is an api to write to read-only text segments, use
+	 * HW breakpoints for the remainder of any tests, else print a
+	 * failure message if hw breakpoints do not work.
+	 */
+	if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
+		eprintk("kgdbts: HW breakpoints do not work,"
+			"skipping remaining tests\n");
+		return;
+	}
+	force_hwbrks = 1;
+#endif /* CONFIG_DEBUG_RODATA */
+
 	/* If the do_fork test is run it will be the last test that is
 	 * executed because a kernel thread will be spawned at the very
 	 * end to unregister the debug hooks.
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 3f28f6e..a0ce0b2 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -3821,7 +3821,7 @@
 #define TPACPI_LED_NUMLEDS 8
 static struct tpacpi_led_classdev *tpacpi_leds;
 static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
-static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
+static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
 	/* there's a limit of 19 chars + NULL before 2.6.26 */
 	"tpacpi::power",
 	"tpacpi:orange:batt",
@@ -3860,10 +3860,10 @@
 static int led_set_status(unsigned int led, enum led_status_t ledstatus)
 {
 	/* off, on, blink. Index is led_status_t */
-	static const int const led_sled_arg1[] = { 0, 1, 3 };
-	static const int const led_exp_hlbl[] = { 0, 0, 1 };	/* led# * */
-	static const int const led_exp_hlcl[] = { 0, 1, 1 };	/* led# * */
-	static const int const led_led_arg1[] = { 0, 0x80, 0xc0 };
+	static const int led_sled_arg1[] = { 0, 1, 3 };
+	static const int led_exp_hlbl[] = { 0, 0, 1 };	/* led# * */
+	static const int led_exp_hlcl[] = { 0, 1, 1 };	/* led# * */
+	static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
 
 	int rc = 0;
 
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 91ded3e..f9ad960 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -46,7 +46,7 @@
 #define MMC_SHIFT	3
 #define MMC_NUM_MINORS	(256 >> MMC_SHIFT)
 
-static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
+static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS);
 
 /*
  * There is one mmc_blk_data per slot.
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 25efd33..b402269 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -346,8 +346,10 @@
 	mutex_lock(&flash->lock);
 
 	/* Wait until finished previous write command. */
-	if (wait_till_ready(flash))
+	if (wait_till_ready(flash)) {
+		mutex_unlock(&flash->lock);
 		return 1;
+	}
 
 	write_enable(flash);
 
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 59d8fb4..effaf7cd 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -331,15 +331,15 @@
 }
 
 static struct pci_device_id ck804xrom_pci_tbl[] = {
-	{ PCI_VENDOR_ID_NVIDIA, 0x0051, PCI_ANY_ID, PCI_ANY_ID, DEV_CK804 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0360, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0361, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0362, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0363, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0364, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0365, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0366, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
-	{ PCI_VENDOR_ID_NVIDIA, 0x0367, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0362), .driver_data = DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0363), .driver_data = DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0364), .driver_data = DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0365), .driver_data = DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0366), .driver_data = DEV_MCP55 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0367), .driver_data = DEV_MCP55 },
 	{ 0, }
 };
 
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 240b0e2..c12d805 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -110,7 +110,7 @@
 	err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
 	if (err > 0)
 		add_mtd_partitions(info->mtd, info->parts, err);
-	else if (err < 0 && pdata->parts)
+	else if (err <= 0 && pdata->parts)
 		add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
 	else
 #endif
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fceb468..fe2bc7e 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1216,7 +1216,7 @@
 
 	clk_enable(info->clk);
 
-	return pxa3xx_nand_config_flash(info);
+	return pxa3xx_nand_config_flash(info, info->flash_info);
 }
 #else
 #define pxa3xx_nand_suspend	NULL
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 3d44d04..ad81ab8 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -76,7 +76,7 @@
 	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
 	if (err > 0)
 		add_mtd_partitions(&info->mtd, info->parts, err);
-	else if (err < 0 && pdata->parts)
+	else if (err <= 0 && pdata->parts)
 		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
 	else
 #endif
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 4747490..c5030f9 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -295,5 +295,5 @@
 module_exit(redboot_parser_exit);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
 MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables");
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 87d8795..b9d097c 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -1062,7 +1062,6 @@
 			struct sk_buff *skb;
 
 			skb = dev_alloc_skb(pkt_len+5);
-			dev->stats.rx_bytes += pkt_len;
 			if (el3_debug > 4)
 				printk("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
@@ -1077,6 +1076,7 @@
 				skb->protocol = eth_type_trans(skb,dev);
 				netif_rx(skb);
 				dev->last_rx = jiffies;
+				dev->stats.rx_bytes += pkt_len;
 				dev->stats.rx_packets++;
 				continue;
 			}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dd0ec9e..f4182cf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2426,7 +2426,7 @@
 
 config EHEA
 	tristate "eHEA Ethernet support"
-	depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG
+	depends on IBMEBUS && INET && SPARSEMEM
 	select INET_LRO
 	---help---
 	  This driver supports the IBM pSeries eHEA ethernet adapter.
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6e4c80d..6ddc911 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2023,6 +2023,7 @@
 		/* Good Receive */
 		pci_unmap_page(adapter->pdev, buffer_info->dma,
 			       buffer_info->length, PCI_DMA_FROMDEVICE);
+		buffer_info->dma = 0;
 		skb = buffer_info->skb;
 		length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
 
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 3634b5f..7023d77 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1239,12 +1239,7 @@
  */
 static irqreturn_t au1000_interrupt(int irq, void *dev_id)
 {
-	struct net_device *dev = (struct net_device *) dev_id;
-
-	if (dev == NULL) {
-		printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
-		return IRQ_RETVAL(1);
-	}
+	struct net_device *dev = dev_id;
 
 	/* Handle RX interrupts first to minimize chance of overrun */
 
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 89c0018..4144343 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -22,7 +22,6 @@
 #include <linux/crc32.h>
 #include <linux/device.h>
 #include <linux/spinlock.h>
-#include <linux/ethtool.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/netdevice.h>
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 93e1363..83768df 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -142,8 +142,8 @@
 
 #define DRV_MODULE_NAME		"cassini"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.5"
-#define DRV_MODULE_RELDATE	"4 Jan 2008"
+#define DRV_MODULE_VERSION	"1.6"
+#define DRV_MODULE_RELDATE	"21 May 2008"
 
 #define CAS_DEF_MSG_ENABLE	  \
 	(NETIF_MSG_DRV		| \
@@ -2136,9 +2136,12 @@
 		if (addr)
 			cas_page_unmap(addr);
 	}
-	skb->csum = csum_unfold(~csum);
-	skb->ip_summed = CHECKSUM_COMPLETE;
 	skb->protocol = eth_type_trans(skb, cp->dev);
+	if (skb->protocol == htons(ETH_P_IP)) {
+		skb->csum = csum_unfold(~csum);
+		skb->ip_summed = CHECKSUM_COMPLETE;
+	} else
+		skb->ip_summed = CHECKSUM_NONE;
 	return len;
 }
 
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 2b5740b..7f3f62e 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -38,6 +38,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/gpio.h>
+#include <asm/atomic.h>
 
 MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
 MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
@@ -187,6 +188,7 @@
 #define CPMAC_EOQ			0x1000
 	struct sk_buff *skb;
 	struct cpmac_desc *next;
+	struct cpmac_desc *prev;
 	dma_addr_t mapping;
 	dma_addr_t data_mapping;
 };
@@ -208,6 +210,7 @@
 	struct work_struct reset_work;
 	struct platform_device *pdev;
 	struct napi_struct napi;
+	atomic_t reset_pending;
 };
 
 static irqreturn_t cpmac_irq(int, void *);
@@ -241,6 +244,16 @@
 	printk("\n");
 }
 
+static void cpmac_dump_all_desc(struct net_device *dev)
+{
+	struct cpmac_priv *priv = netdev_priv(dev);
+	struct cpmac_desc *dump = priv->rx_head;
+	do {
+		cpmac_dump_desc(dev, dump);
+		dump = dump->next;
+	} while (dump != priv->rx_head);
+}
+
 static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb)
 {
 	int i;
@@ -412,21 +425,42 @@
 static int cpmac_poll(struct napi_struct *napi, int budget)
 {
 	struct sk_buff *skb;
-	struct cpmac_desc *desc;
-	int received = 0;
+	struct cpmac_desc *desc, *restart;
 	struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi);
+	int received = 0, processed = 0;
 
 	spin_lock(&priv->rx_lock);
 	if (unlikely(!priv->rx_head)) {
 		if (netif_msg_rx_err(priv) && net_ratelimit())
 			printk(KERN_WARNING "%s: rx: polling, but no queue\n",
 			       priv->dev->name);
+		spin_unlock(&priv->rx_lock);
 		netif_rx_complete(priv->dev, napi);
 		return 0;
 	}
 
 	desc = priv->rx_head;
+	restart = NULL;
 	while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) {
+		processed++;
+
+		if ((desc->dataflags & CPMAC_EOQ) != 0) {
+			/* The last update to eoq->hw_next didn't happen
+			* soon enough, and the receiver stopped here.
+			*Remember this descriptor so we can restart
+			* the receiver after freeing some space.
+			*/
+			if (unlikely(restart)) {
+				if (netif_msg_rx_err(priv))
+					printk(KERN_ERR "%s: poll found a"
+						" duplicate EOQ: %p and %p\n",
+						priv->dev->name, restart, desc);
+				goto fatal_error;
+			}
+
+			restart = desc->next;
+		}
+
 		skb = cpmac_rx_one(priv, desc);
 		if (likely(skb)) {
 			netif_receive_skb(skb);
@@ -435,19 +469,90 @@
 		desc = desc->next;
 	}
 
+	if (desc != priv->rx_head) {
+		/* We freed some buffers, but not the whole ring,
+		 * add what we did free to the rx list */
+		desc->prev->hw_next = (u32)0;
+		priv->rx_head->prev->hw_next = priv->rx_head->mapping;
+	}
+
+	/* Optimization: If we did not actually process an EOQ (perhaps because
+	 * of quota limits), check to see if the tail of the queue has EOQ set.
+	* We should immediately restart in that case so that the receiver can
+	* restart and run in parallel with more packet processing.
+	* This lets us handle slightly larger bursts before running
+	* out of ring space (assuming dev->weight < ring_size) */
+
+	if (!restart &&
+	     (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ))
+		    == CPMAC_EOQ &&
+	     (priv->rx_head->dataflags & CPMAC_OWN) != 0) {
+		/* reset EOQ so the poll loop (above) doesn't try to
+		* restart this when it eventually gets to this descriptor.
+		*/
+		priv->rx_head->prev->dataflags &= ~CPMAC_EOQ;
+		restart = priv->rx_head;
+	}
+
+	if (restart) {
+		priv->dev->stats.rx_errors++;
+		priv->dev->stats.rx_fifo_errors++;
+		if (netif_msg_rx_err(priv) && net_ratelimit())
+			printk(KERN_WARNING "%s: rx dma ring overrun\n",
+			       priv->dev->name);
+
+		if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) {
+			if (netif_msg_drv(priv))
+				printk(KERN_ERR "%s: cpmac_poll is trying to "
+					"restart rx from a descriptor that's "
+					"not free: %p\n",
+					priv->dev->name, restart);
+				goto fatal_error;
+		}
+
+		cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping);
+	}
+
 	priv->rx_head = desc;
 	spin_unlock(&priv->rx_lock);
 	if (unlikely(netif_msg_rx_status(priv)))
 		printk(KERN_DEBUG "%s: poll processed %d packets\n",
 		       priv->dev->name, received);
-	if (desc->dataflags & CPMAC_OWN) {
+	if (processed == 0) {
+		/* we ran out of packets to read,
+		 * revert to interrupt-driven mode */
 		netif_rx_complete(priv->dev, napi);
-		cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping);
 		cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1);
 		return 0;
 	}
 
 	return 1;
+
+fatal_error:
+	/* Something went horribly wrong.
+	 * Reset hardware to try to recover rather than wedging. */
+
+	if (netif_msg_drv(priv)) {
+		printk(KERN_ERR "%s: cpmac_poll is confused. "
+				"Resetting hardware\n", priv->dev->name);
+		cpmac_dump_all_desc(priv->dev);
+		printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n",
+			priv->dev->name,
+			cpmac_read(priv->regs, CPMAC_RX_PTR(0)),
+			cpmac_read(priv->regs, CPMAC_RX_ACK(0)));
+	}
+
+	spin_unlock(&priv->rx_lock);
+	netif_rx_complete(priv->dev, napi);
+	netif_stop_queue(priv->dev);
+	napi_disable(&priv->napi);
+
+	atomic_inc(&priv->reset_pending);
+	cpmac_hw_stop(priv->dev);
+	if (!schedule_work(&priv->reset_work))
+		atomic_dec(&priv->reset_pending);
+	return 0;
+
 }
 
 static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -456,6 +561,9 @@
 	struct cpmac_desc *desc;
 	struct cpmac_priv *priv = netdev_priv(dev);
 
+	if (unlikely(atomic_read(&priv->reset_pending)))
+		return NETDEV_TX_BUSY;
+
 	if (unlikely(skb_padto(skb, ETH_ZLEN)))
 		return NETDEV_TX_OK;
 
@@ -621,8 +729,10 @@
 			desc->dataflags = CPMAC_OWN;
 			dev->stats.rx_dropped++;
 		}
+		desc->hw_next = desc->next->mapping;
 		desc = desc->next;
 	}
+	priv->rx_head->prev->hw_next = 0;
 }
 
 static void cpmac_clear_tx(struct net_device *dev)
@@ -635,14 +745,14 @@
 		priv->desc_ring[i].dataflags = 0;
 		if (priv->desc_ring[i].skb) {
 			dev_kfree_skb_any(priv->desc_ring[i].skb);
-			if (netif_subqueue_stopped(dev, i))
-			    netif_wake_subqueue(dev, i);
+			priv->desc_ring[i].skb = NULL;
 		}
 	}
 }
 
 static void cpmac_hw_error(struct work_struct *work)
 {
+	int i;
 	struct cpmac_priv *priv =
 		container_of(work, struct cpmac_priv, reset_work);
 
@@ -651,8 +761,48 @@
 	spin_unlock(&priv->rx_lock);
 	cpmac_clear_tx(priv->dev);
 	cpmac_hw_start(priv->dev);
-	napi_enable(&priv->napi);
-	netif_start_queue(priv->dev);
+	barrier();
+	atomic_dec(&priv->reset_pending);
+
+	for (i = 0; i < CPMAC_QUEUES; i++)
+		netif_wake_subqueue(priv->dev, i);
+	netif_wake_queue(priv->dev);
+	cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3);
+}
+
+static void cpmac_check_status(struct net_device *dev)
+{
+	struct cpmac_priv *priv = netdev_priv(dev);
+
+	u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS);
+	int rx_channel = (macstatus >> 8) & 7;
+	int rx_code = (macstatus >> 12) & 15;
+	int tx_channel = (macstatus >> 16) & 7;
+	int tx_code = (macstatus >> 20) & 15;
+
+	if (rx_code || tx_code) {
+		if (netif_msg_drv(priv) && net_ratelimit()) {
+			/* Can't find any documentation on what these
+			 *error codes actually are. So just log them and hope..
+			 */
+			if (rx_code)
+				printk(KERN_WARNING "%s: host error %d on rx "
+				     "channel %d (macstatus %08x), resetting\n",
+				     dev->name, rx_code, rx_channel, macstatus);
+			if (tx_code)
+				printk(KERN_WARNING "%s: host error %d on tx "
+				     "channel %d (macstatus %08x), resetting\n",
+				     dev->name, tx_code, tx_channel, macstatus);
+		}
+
+		netif_stop_queue(dev);
+		cpmac_hw_stop(dev);
+		if (schedule_work(&priv->reset_work))
+			atomic_inc(&priv->reset_pending);
+		if (unlikely(netif_msg_hw(priv)))
+			cpmac_dump_regs(dev);
+	}
+	cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff);
 }
 
 static irqreturn_t cpmac_irq(int irq, void *dev_id)
@@ -683,49 +833,32 @@
 
 	cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0);
 
-	if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) {
-		if (netif_msg_drv(priv) && net_ratelimit())
-			printk(KERN_ERR "%s: hw error, resetting...\n",
-			       dev->name);
-		netif_stop_queue(dev);
-		napi_disable(&priv->napi);
-		cpmac_hw_stop(dev);
-		schedule_work(&priv->reset_work);
-		if (unlikely(netif_msg_hw(priv)))
-			cpmac_dump_regs(dev);
-	}
+	if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS)))
+		cpmac_check_status(dev);
 
 	return IRQ_HANDLED;
 }
 
 static void cpmac_tx_timeout(struct net_device *dev)
 {
-	struct cpmac_priv *priv = netdev_priv(dev);
 	int i;
+	struct cpmac_priv *priv = netdev_priv(dev);
 
 	spin_lock(&priv->lock);
 	dev->stats.tx_errors++;
 	spin_unlock(&priv->lock);
 	if (netif_msg_tx_err(priv) && net_ratelimit())
 		printk(KERN_WARNING "%s: transmit timeout\n", dev->name);
-	/* 
-	 * FIXME: waking up random queue is not the best thing to
-	 * do... on the other hand why we got here at all?
-	 */
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+
+	atomic_inc(&priv->reset_pending);
+	barrier();
+	cpmac_clear_tx(dev);
+	barrier();
+	atomic_dec(&priv->reset_pending);
+
+	netif_wake_queue(priv->dev);
 	for (i = 0; i < CPMAC_QUEUES; i++)
-		if (priv->desc_ring[i].skb) {
-			priv->desc_ring[i].dataflags = 0;
-			dev_kfree_skb_any(priv->desc_ring[i].skb);
-			netif_wake_subqueue(dev, i);
-			break;
-		}
-#else
-	priv->desc_ring[0].dataflags = 0;
-	if (priv->desc_ring[0].skb)
-		dev_kfree_skb_any(priv->desc_ring[0].skb);
-	netif_wake_queue(dev);
-#endif
+		netif_wake_subqueue(dev, i);
 }
 
 static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -901,9 +1034,12 @@
 		desc->buflen = CPMAC_SKB_SIZE;
 		desc->dataflags = CPMAC_OWN;
 		desc->next = &priv->rx_head[(i + 1) % priv->ring_size];
+		desc->next->prev = desc;
 		desc->hw_next = (u32)desc->next->mapping;
 	}
 
+	priv->rx_head->prev->hw_next = (u32)0;
+
 	if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED,
 			       dev->name, dev))) {
 		if (netif_msg_drv(priv))
@@ -912,6 +1048,7 @@
 		goto fail_irq;
 	}
 
+	atomic_set(&priv->reset_pending, 0);
 	INIT_WORK(&priv->reset_work, cpmac_hw_error);
 	cpmac_hw_start(dev);
 
@@ -1007,21 +1144,10 @@
 
 	if (phy_id == PHY_MAX_ADDR) {
 		if (external_switch || dumb_switch) {
-			struct fixed_phy_status status = {};
-
-			/*
-			 * FIXME: this should be in the platform code!
-			 * Since there is not platform code at all (that is,
-			 * no mainline users of that driver), place it here
-			 * for now.
-			 */
-			phy_id = 0;
-			status.link = 1;
-			status.duplex = 1;
-			status.speed = 100;
-			fixed_phy_add(PHY_POLL, phy_id, &status);
+			mdio_bus_id = 0; /* fixed phys bus */
+			phy_id = pdev->id;
 		} else {
-			printk(KERN_ERR "cpmac: no PHY present\n");
+			dev_err(&pdev->dev, "no PHY present\n");
 			return -ENODEV;
 		}
 	}
@@ -1064,10 +1190,8 @@
 	priv->msg_enable = netif_msg_init(debug_level, 0xff);
 	memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
 
-	snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
-
-	priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
-				PHY_INTERFACE_MODE_MII);
+	priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id,
+				&cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
 	if (IS_ERR(priv->phy)) {
 		if (netif_msg_drv(priv))
 			printk(KERN_ERR "%s: Could not attach to PHY\n",
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 348371f..fba87ab 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1394,7 +1394,11 @@
 #endif
         if (!result) {
                 printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
-        release_irq:
+release_dma:
+#if ALLOW_DMA
+		free_dma(dev->dma);
+#endif
+release_irq:
 #if ALLOW_DMA
 		release_dma_buff(lp);
 #endif
@@ -1442,12 +1446,12 @@
 			if ((result = detect_bnc(dev)) != DETECTED_NONE)
 				break;
 		printk(KERN_ERR "%s: no media detected\n", dev->name);
-                goto release_irq;
+		goto release_dma;
 	}
 	switch(result) {
 	case DETECTED_NONE:
 		printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
-                goto release_irq;
+		goto release_dma;
 	case DETECTED_RJ45H:
 		printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
 		break;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d45bcd2..864295e 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -903,7 +903,7 @@
 	if (netif_msg_ifdown(db))
 		dev_dbg(db->dev, "shutting down %s\n", ndev->name);
 
-	cancel_delayed_work(&db->phy_poll);
+	cancel_delayed_work_sync(&db->phy_poll);
 
 	netif_stop_queue(ndev);
 	netif_carrier_off(ndev);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 8cbb40f..cab1835 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4201,8 +4201,8 @@
 	struct e1000_adapter *adapter;
 	struct e1000_hw *hw;
 	const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
-	unsigned long mmio_start, mmio_len;
-	unsigned long flash_start, flash_len;
+	resource_size_t mmio_start, mmio_len;
+	resource_size_t flash_start, flash_len;
 
 	static int cards_found;
 	int i, err, pci_using_dac;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index d1b6d4e..287a619 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2213,8 +2213,6 @@
 		goto out;
 	}
 
-	memset(cb1->vlan_filter, 0, sizeof(cb1->vlan_filter));
-
 	hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
 				       H_PORT_CB1, H_PORT_CB1_ALL, cb1);
 	if (hret != H_SUCCESS)
@@ -3178,11 +3176,12 @@
 
 static void ehea_shutdown_single_port(struct ehea_port *port)
 {
+	struct ehea_adapter *adapter = port->adapter;
 	unregister_netdev(port->netdev);
 	ehea_unregister_port(port);
 	kfree(port->mc_list);
 	free_netdev(port->netdev);
-	port->adapter->active_ports--;
+	adapter->active_ports--;
 }
 
 static int ehea_setup_ports(struct ehea_adapter *adapter)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 35f66d4..9eca97f 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5823,6 +5823,7 @@
 	writel(txreg, base + NvRegTransmitPoll);
 
 	rc = nv_open(dev);
+	nv_set_multicast(dev);
 out:
 	return rc;
 }
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 67b4b07..a5baaf5 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1093,7 +1093,7 @@
 		if (registered)
 			unregister_netdev(ndev);
 
-		if (fep != NULL) {
+		if (fep && fep->ops) {
 			(*fep->ops->free_bd)(ndev);
 			(*fep->ops->cleanup_data)(ndev);
 		}
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index f905159..45ae9d1 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1340,9 +1340,10 @@
 		case PARAM_RTS:	
 			if ( !(scc->wreg[R5] & RTS) )
 			{
-				if (arg != TX_OFF)
+				if (arg != TX_OFF) {
 					scc_key_trx(scc, TX_ON);
 					scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
+				}
 			} else {
 				if (arg == TX_OFF)
 				{
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index c91b12e..e0d76c7 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.3.2-1.287"
+#define MYRI10GE_VERSION_STR "1.3.99-1.347"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -631,7 +631,7 @@
 	return status;
 }
 
-int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
+static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
 {
 	struct myri10ge_cmd cmd;
 	int status;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 8f328a0..a550c9b 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -391,7 +391,9 @@
 	    cardtype = CONTEC;
 	    break;
 	case MANFID_FUJITSU:
-	    if (link->card_id == PRODID_FUJITSU_MBH10302)
+	    if (link->conf.ConfigBase == 0x0fe0)
+		cardtype = MBH10302;
+	    else if (link->card_id == PRODID_FUJITSU_MBH10302) 
                 /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
                    but these are MBH10304 based card. */ 
 		cardtype = MBH10304;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index d041f83..f6c4698 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1461,22 +1461,25 @@
 set_multicast_list(struct net_device *dev)
 {
     unsigned int ioaddr = dev->base_addr;
+    unsigned value;
 
     SelectPage(0x42);
+    value = GetByte(XIRCREG42_SWC1) & 0xC0;
+
     if (dev->flags & IFF_PROMISC) { /* snoop */
-	PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
+	PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
     } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
-	PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */
+	PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
     } else if (dev->mc_count) {
 	/* the chip can filter 9 addresses perfectly */
-	PutByte(XIRCREG42_SWC1, 0x01);
+	PutByte(XIRCREG42_SWC1, value | 0x01);
 	SelectPage(0x40);
 	PutByte(XIRCREG40_CMD0, Offline);
 	set_addresses(dev);
 	SelectPage(0x40);
 	PutByte(XIRCREG40_CMD0, EnableRecv | Online);
     } else { /* standard usage */
-	PutByte(XIRCREG42_SWC1, 0x00);
+	PutByte(XIRCREG42_SWC1, value | 0x00);
     }
     SelectPage(0);
 }
@@ -1722,6 +1725,7 @@
 
     /* enable receiver and put the mac online */
     if (full) {
+	set_multicast_list(dev);
 	SelectPage(0x40);
 	PutByte(XIRCREG40_CMD0, EnableRecv | Online);
     }
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index a1c454d..1c89b97 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -325,7 +325,7 @@
 static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 			     void *ptr);
 static void pcnet32_purge_tx_ring(struct net_device *dev);
-static int pcnet32_alloc_ring(struct net_device *dev, char *name);
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name);
 static void pcnet32_free_ring(struct net_device *dev);
 static void pcnet32_check_media(struct net_device *dev, int verbose);
 
@@ -1983,7 +1983,7 @@
 }
 
 /* if any allocation fails, caller must also call pcnet32_free_ring */
-static int pcnet32_alloc_ring(struct net_device *dev, char *name)
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 {
 	struct pcnet32_private *lp = netdev_priv(dev);
 
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6bf9e76..6eb2d31 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -5,7 +5,7 @@
 menuconfig PHYLIB
 	tristate "PHY Device support and infrastructure"
 	depends on !S390
-	depends on NET_ETHERNET && (BROKEN || !S390)
+	depends on NET_ETHERNET
 	help
 	  Ethernet controllers are usually attached to PHY
 	  devices.  This option provides infrastructure for
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ac3c01d..16a0e7d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -207,6 +207,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL(get_phy_id);
 
 /**
  * get_phy_device - reads the specified PHY device and returns its @phy_device struct
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 8db342f..70cfdb4 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -240,12 +240,15 @@
 	if (sk == NULL)
 		return NULL;
 
+	sock_hold(sk);
 	session = (struct pppol2tp_session *)(sk->sk_user_data);
-	if (session == NULL)
-		return NULL;
+	if (session == NULL) {
+		sock_put(sk);
+		goto out;
+	}
 
 	BUG_ON(session->magic != L2TP_SESSION_MAGIC);
-
+out:
 	return session;
 }
 
@@ -256,12 +259,15 @@
 	if (sk == NULL)
 		return NULL;
 
+	sock_hold(sk);
 	tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data);
-	if (tunnel == NULL)
-		return NULL;
+	if (tunnel == NULL) {
+		sock_put(sk);
+		goto out;
+	}
 
 	BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
-
+out:
 	return tunnel;
 }
 
@@ -716,12 +722,14 @@
 	session->stats.rx_errors++;
 	kfree_skb(skb);
 	sock_put(session->sock);
+	sock_put(sock);
 
 	return 0;
 
 error:
 	/* Put UDP header back */
 	__skb_push(skb, sizeof(struct udphdr));
+	sock_put(sock);
 
 no_tunnel:
 	return 1;
@@ -745,10 +753,13 @@
 	       "%s: received %d bytes\n", tunnel->name, skb->len);
 
 	if (pppol2tp_recv_core(sk, skb))
-		goto pass_up;
+		goto pass_up_put;
 
+	sock_put(sk);
 	return 0;
 
+pass_up_put:
+	sock_put(sk);
 pass_up:
 	return 1;
 }
@@ -858,7 +869,7 @@
 
 	tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
 	if (tunnel == NULL)
-		goto error;
+		goto error_put_sess;
 
 	/* What header length is configured for this session? */
 	hdr_len = pppol2tp_l2tp_header_len(session);
@@ -870,7 +881,7 @@
 			   sizeof(ppph) + total_len,
 			   0, GFP_KERNEL);
 	if (!skb)
-		goto error;
+		goto error_put_sess_tun;
 
 	/* Reserve space for headers. */
 	skb_reserve(skb, NET_SKB_PAD);
@@ -900,7 +911,7 @@
 	error = memcpy_fromiovec(skb->data, m->msg_iov, total_len);
 	if (error < 0) {
 		kfree_skb(skb);
-		goto error;
+		goto error_put_sess_tun;
 	}
 	skb_put(skb, total_len);
 
@@ -947,10 +958,33 @@
 		session->stats.tx_errors++;
 	}
 
+	return error;
+
+error_put_sess_tun:
+	sock_put(session->tunnel_sock);
+error_put_sess:
+	sock_put(sk);
 error:
 	return error;
 }
 
+/* Automatically called when the skb is freed.
+ */
+static void pppol2tp_sock_wfree(struct sk_buff *skb)
+{
+	sock_put(skb->sk);
+}
+
+/* For data skbs that we transmit, we associate with the tunnel socket
+ * but don't do accounting.
+ */
+static inline void pppol2tp_skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+	sock_hold(sk);
+	skb->sk = sk;
+	skb->destructor = pppol2tp_sock_wfree;
+}
+
 /* Transmit function called by generic PPP driver.  Sends PPP frame
  * over PPPoL2TP socket.
  *
@@ -993,10 +1027,10 @@
 
 	sk_tun = session->tunnel_sock;
 	if (sk_tun == NULL)
-		goto abort;
+		goto abort_put_sess;
 	tunnel = pppol2tp_sock_to_tunnel(sk_tun);
 	if (tunnel == NULL)
-		goto abort;
+		goto abort_put_sess;
 
 	/* What header length is configured for this session? */
 	hdr_len = pppol2tp_l2tp_header_len(session);
@@ -1009,7 +1043,7 @@
 		sizeof(struct udphdr) + hdr_len + sizeof(ppph);
 	old_headroom = skb_headroom(skb);
 	if (skb_cow_head(skb, headroom))
-		goto abort;
+		goto abort_put_sess_tun;
 
 	new_headroom = skb_headroom(skb);
 	skb_orphan(skb);
@@ -1069,7 +1103,7 @@
 	/* Get routing info from the tunnel socket */
 	dst_release(skb->dst);
 	skb->dst = dst_clone(__sk_dst_get(sk_tun));
-	skb->sk = sk_tun;
+	pppol2tp_skb_set_owner_w(skb, sk_tun);
 
 	/* Queue the packet to IP for output */
 	len = skb->len;
@@ -1086,8 +1120,14 @@
 		session->stats.tx_errors++;
 	}
 
+	sock_put(sk_tun);
+	sock_put(sk);
 	return 1;
 
+abort_put_sess_tun:
+	sock_put(sk_tun);
+abort_put_sess:
+	sock_put(sk);
 abort:
 	/* Free the original skb */
 	kfree_skb(skb);
@@ -1191,7 +1231,7 @@
 {
 	struct pppol2tp_tunnel *tunnel;
 
-	tunnel = pppol2tp_sock_to_tunnel(sk);
+	tunnel = sk->sk_user_data;
 	if (tunnel == NULL)
 		goto end;
 
@@ -1230,10 +1270,12 @@
 	if (sk->sk_user_data != NULL) {
 		struct pppol2tp_tunnel *tunnel;
 
-		session = pppol2tp_sock_to_session(sk);
+		session = sk->sk_user_data;
 		if (session == NULL)
 			goto out;
 
+		BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+
 		/* Don't use pppol2tp_sock_to_tunnel() here to
 		 * get the tunnel context because the tunnel
 		 * socket might have already been closed (its
@@ -1279,6 +1321,7 @@
 static int pppol2tp_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
+	struct pppol2tp_session *session;
 	int error;
 
 	if (!sk)
@@ -1296,9 +1339,18 @@
 	sock_orphan(sk);
 	sock->sk = NULL;
 
+	session = pppol2tp_sock_to_session(sk);
+
 	/* Purge any queued data */
 	skb_queue_purge(&sk->sk_receive_queue);
 	skb_queue_purge(&sk->sk_write_queue);
+	if (session != NULL) {
+		struct sk_buff *skb;
+		while ((skb = skb_dequeue(&session->reorder_q))) {
+			kfree_skb(skb);
+			sock_put(sk);
+		}
+	}
 
 	release_sock(sk);
 
@@ -1601,7 +1653,7 @@
 
 	error = ppp_register_channel(&po->chan);
 	if (error)
-		goto end;
+		goto end_put_tun;
 
 	/* This is how we get the session context from the socket. */
 	sk->sk_user_data = session;
@@ -1621,6 +1673,8 @@
 	PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
 	       "%s: created\n", session->name);
 
+end_put_tun:
+	sock_put(tunnel_sock);
 end:
 	release_sock(sk);
 
@@ -1668,6 +1722,7 @@
 	*usockaddr_len = len;
 
 	error = 0;
+	sock_put(sock->sk);
 
 end:
 	return error;
@@ -1906,14 +1961,17 @@
 		err = -EBADF;
 		tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
 		if (tunnel == NULL)
-			goto end;
+			goto end_put_sess;
 
 		err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg);
-		goto end;
+		sock_put(session->tunnel_sock);
+		goto end_put_sess;
 	}
 
 	err = pppol2tp_session_ioctl(session, cmd, arg);
 
+end_put_sess:
+	sock_put(sk);
 end:
 	return err;
 }
@@ -2059,14 +2117,17 @@
 		err = -EBADF;
 		tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
 		if (tunnel == NULL)
-			goto end;
+			goto end_put_sess;
 
 		err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val);
+		sock_put(session->tunnel_sock);
 	} else
 		err = pppol2tp_session_setsockopt(sk, session, optname, val);
 
 	err = 0;
 
+end_put_sess:
+	sock_put(sk);
 end:
 	return err;
 }
@@ -2181,20 +2242,24 @@
 		err = -EBADF;
 		tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
 		if (tunnel == NULL)
-			goto end;
+			goto end_put_sess;
 
 		err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val);
+		sock_put(session->tunnel_sock);
 	} else
 		err = pppol2tp_session_getsockopt(sk, session, optname, &val);
 
 	err = -EFAULT;
 	if (put_user(len, (int __user *) optlen))
-		goto end;
+		goto end_put_sess;
 
 	if (copy_to_user((void __user *) optval, &val, len))
-		goto end;
+		goto end_put_sess;
 
 	err = 0;
+
+end_put_sess:
+	sock_put(sk);
 end:
 	return err;
 }
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 2109508..f8274f8 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -250,7 +250,7 @@
 	u64 tx_mat0_n[0x8];
 #define TX_MAT_SET(fifo, msi)			vBIT(msi, (8 * fifo), 8)
 
-	u8 unused_1[0x8];
+	u64 xmsi_mask_reg;
 	u64 stat_byte_cnt;
 #define STAT_BC(n)                              vBIT(n,4,12)
 
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 523478e..b5c1e66 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -86,7 +86,7 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.26.23"
+#define DRV_VERSION "2.0.26.24"
 
 /* S2io Driver name & version. */
 static char s2io_driver_name[] = "Neterion";
@@ -1113,9 +1113,10 @@
 	struct pci_dev *tdev = NULL;
 	while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
 		if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
-			if (tdev->bus == s2io_pdev->bus->parent)
+			if (tdev->bus == s2io_pdev->bus->parent) {
 				pci_dev_put(tdev);
 				return 1;
+			}
 		}
 	}
 	return 0;
@@ -1219,15 +1220,33 @@
 				TTI_DATA1_MEM_TX_URNG_B(0x10) |
 				TTI_DATA1_MEM_TX_URNG_C(0x30) |
 				TTI_DATA1_MEM_TX_TIMER_AC_EN;
-
-		if (use_continuous_tx_intrs && (link == LINK_UP))
-			val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
+		if (i == 0)
+			if (use_continuous_tx_intrs && (link == LINK_UP))
+				val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
 		writeq(val64, &bar0->tti_data1_mem);
 
-		val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
-				TTI_DATA2_MEM_TX_UFC_B(0x20) |
-				TTI_DATA2_MEM_TX_UFC_C(0x40) |
-				TTI_DATA2_MEM_TX_UFC_D(0x80);
+		if (nic->config.intr_type == MSI_X) {
+			val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+				TTI_DATA2_MEM_TX_UFC_B(0x100) |
+				TTI_DATA2_MEM_TX_UFC_C(0x200) |
+				TTI_DATA2_MEM_TX_UFC_D(0x300);
+		} else {
+			if ((nic->config.tx_steering_type ==
+				TX_DEFAULT_STEERING) &&
+				(config->tx_fifo_num > 1) &&
+				(i >= nic->udp_fifo_idx) &&
+				(i < (nic->udp_fifo_idx +
+				nic->total_udp_fifos)))
+				val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
+					TTI_DATA2_MEM_TX_UFC_B(0x80) |
+					TTI_DATA2_MEM_TX_UFC_C(0x100) |
+					TTI_DATA2_MEM_TX_UFC_D(0x120);
+			else
+				val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+					TTI_DATA2_MEM_TX_UFC_B(0x20) |
+					TTI_DATA2_MEM_TX_UFC_C(0x40) |
+					TTI_DATA2_MEM_TX_UFC_D(0x80);
+		}
 
 		writeq(val64, &bar0->tti_data2_mem);
 
@@ -2813,6 +2832,15 @@
 	}
 }
 
+static int s2io_chk_rx_buffers(struct ring_info *ring)
+{
+	if (fill_rx_buffers(ring) == -ENOMEM) {
+		DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
+		DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+	}
+	return 0;
+}
+
 /**
  * s2io_poll - Rx interrupt handler for NAPI support
  * @napi : pointer to the napi structure.
@@ -2826,57 +2854,73 @@
  * 0 on success and 1 if there are No Rx packets to be processed.
  */
 
-static int s2io_poll(struct napi_struct *napi, int budget)
+static int s2io_poll_msix(struct napi_struct *napi, int budget)
+{
+	struct ring_info *ring = container_of(napi, struct ring_info, napi);
+	struct net_device *dev = ring->dev;
+	struct config_param *config;
+	struct mac_info *mac_control;
+	int pkts_processed = 0;
+	u8 __iomem *addr = NULL;
+	u8 val8 = 0;
+	struct s2io_nic *nic = dev->priv;
+	struct XENA_dev_config __iomem *bar0 = nic->bar0;
+	int budget_org = budget;
+
+	config = &nic->config;
+	mac_control = &nic->mac_control;
+
+	if (unlikely(!is_s2io_card_up(nic)))
+		return 0;
+
+	pkts_processed = rx_intr_handler(ring, budget);
+	s2io_chk_rx_buffers(ring);
+
+	if (pkts_processed < budget_org) {
+		netif_rx_complete(dev, napi);
+		/*Re Enable MSI-Rx Vector*/
+		addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+		addr += 7 - ring->ring_no;
+		val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
+		writeb(val8, addr);
+		val8 = readb(addr);
+	}
+	return pkts_processed;
+}
+static int s2io_poll_inta(struct napi_struct *napi, int budget)
 {
 	struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
+	struct ring_info *ring;
 	struct net_device *dev = nic->dev;
-	int pkt_cnt = 0, org_pkts_to_process;
-	struct mac_info *mac_control;
 	struct config_param *config;
+	struct mac_info *mac_control;
+	int pkts_processed = 0;
+	int ring_pkts_processed, i;
 	struct XENA_dev_config __iomem *bar0 = nic->bar0;
-	int i;
+	int budget_org = budget;
 
-	mac_control = &nic->mac_control;
 	config = &nic->config;
+	mac_control = &nic->mac_control;
 
-	nic->pkts_to_process = budget;
-	org_pkts_to_process = nic->pkts_to_process;
-
-	writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
-	readl(&bar0->rx_traffic_int);
+	if (unlikely(!is_s2io_card_up(nic)))
+		return 0;
 
 	for (i = 0; i < config->rx_ring_num; i++) {
-		rx_intr_handler(&mac_control->rings[i]);
-		pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
-		if (!nic->pkts_to_process) {
-			/* Quota for the current iteration has been met */
-			goto no_rx;
-		}
-	}
-
-	netif_rx_complete(dev, napi);
-
-	for (i = 0; i < config->rx_ring_num; i++) {
-		if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
-			DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
-			DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
+		ring = &mac_control->rings[i];
+		ring_pkts_processed = rx_intr_handler(ring, budget);
+		s2io_chk_rx_buffers(ring);
+		pkts_processed += ring_pkts_processed;
+		budget -= ring_pkts_processed;
+		if (budget <= 0)
 			break;
-		}
 	}
-	/* Re enable the Rx interrupts. */
-	writeq(0x0, &bar0->rx_traffic_mask);
-	readl(&bar0->rx_traffic_mask);
-	return pkt_cnt;
-
-no_rx:
-	for (i = 0; i < config->rx_ring_num; i++) {
-		if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
-			DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
-			DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
-			break;
-		}
+	if (pkts_processed < budget_org) {
+		netif_rx_complete(dev, napi);
+		/* Re enable the Rx interrupts for the ring */
+		writeq(0, &bar0->rx_traffic_mask);
+		readl(&bar0->rx_traffic_mask);
 	}
-	return pkt_cnt;
+	return pkts_processed;
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2918,7 +2962,7 @@
 
 	/* check for received packet and indicate up to network */
 	for (i = 0; i < config->rx_ring_num; i++)
-		rx_intr_handler(&mac_control->rings[i]);
+		rx_intr_handler(&mac_control->rings[i], 0);
 
 	for (i = 0; i < config->rx_ring_num; i++) {
 		if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
@@ -2934,7 +2978,8 @@
 
 /**
  *  rx_intr_handler - Rx interrupt handler
- *  @nic: device private variable.
+ *  @ring_info: per ring structure.
+ *  @budget: budget for napi processing.
  *  Description:
  *  If the interrupt is because of a received frame or if the
  *  receive ring contains fresh as yet un-processed frames,this function is
@@ -2942,15 +2987,15 @@
  *  stopped and sends the skb to the OSM's Rx handler and then increments
  *  the offset.
  *  Return Value:
- *  NONE.
+ *  No. of napi packets processed.
  */
-static void rx_intr_handler(struct ring_info *ring_data)
+static int rx_intr_handler(struct ring_info *ring_data, int budget)
 {
 	int get_block, put_block;
 	struct rx_curr_get_info get_info, put_info;
 	struct RxD_t *rxdp;
 	struct sk_buff *skb;
-	int pkt_cnt = 0;
+	int pkt_cnt = 0, napi_pkts = 0;
 	int i;
 	struct RxD1* rxdp1;
 	struct RxD3* rxdp3;
@@ -2977,7 +3022,7 @@
 			DBG_PRINT(ERR_DBG, "%s: The skb is ",
 				  ring_data->dev->name);
 			DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-			return;
+			return 0;
 		}
 		if (ring_data->rxd_mode == RXD_MODE_1) {
 			rxdp1 = (struct RxD1*)rxdp;
@@ -3014,9 +3059,10 @@
 			rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
 		}
 
-		if(ring_data->nic->config.napi){
-			ring_data->nic->pkts_to_process -= 1;
-			if (!ring_data->nic->pkts_to_process)
+		if (ring_data->nic->config.napi) {
+			budget--;
+			napi_pkts++;
+			if (!budget)
 				break;
 		}
 		pkt_cnt++;
@@ -3034,6 +3080,7 @@
 			}
 		}
 	}
+	return(napi_pkts);
 }
 
 /**
@@ -3730,14 +3777,19 @@
 {
 	struct XENA_dev_config __iomem *bar0 = nic->bar0;
 	u64 val64;
-	int i;
+	int i, msix_index;
+
+
+	if (nic->device_type == XFRAME_I_DEVICE)
+		return;
 
 	for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
+		msix_index = (i) ? ((i-1) * 8 + 1): 0;
 		writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
 		writeq(nic->msix_info[i].data, &bar0->xmsi_data);
-		val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
+		val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
 		writeq(val64, &bar0->xmsi_access);
-		if (wait_for_msix_trans(nic, i)) {
+		if (wait_for_msix_trans(nic, msix_index)) {
 			DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
 			continue;
 		}
@@ -3748,13 +3800,17 @@
 {
 	struct XENA_dev_config __iomem *bar0 = nic->bar0;
 	u64 val64, addr, data;
-	int i;
+	int i, msix_index;
+
+	if (nic->device_type == XFRAME_I_DEVICE)
+		return;
 
 	/* Store and display */
 	for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
-		val64 = (s2BIT(15) | vBIT(i, 26, 6));
+		msix_index = (i) ? ((i-1) * 8 + 1): 0;
+		val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
 		writeq(val64, &bar0->xmsi_access);
-		if (wait_for_msix_trans(nic, i)) {
+		if (wait_for_msix_trans(nic, msix_index)) {
 			DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
 			continue;
 		}
@@ -3770,11 +3826,11 @@
 static int s2io_enable_msi_x(struct s2io_nic *nic)
 {
 	struct XENA_dev_config __iomem *bar0 = nic->bar0;
-	u64 tx_mat, rx_mat;
+	u64 rx_mat;
 	u16 msi_control; /* Temp variable */
 	int ret, i, j, msix_indx = 1;
 
-	nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry),
+	nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
 			       GFP_KERNEL);
 	if (!nic->entries) {
 		DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
@@ -3783,10 +3839,12 @@
 		return -ENOMEM;
 	}
 	nic->mac_control.stats_info->sw_stat.mem_allocated
-		+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+		+= (nic->num_entries * sizeof(struct msix_entry));
+
+	memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
 
 	nic->s2io_entries =
-		kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry),
+		kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
 				   GFP_KERNEL);
 	if (!nic->s2io_entries) {
 		DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
@@ -3794,60 +3852,52 @@
 		nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
 		kfree(nic->entries);
 		nic->mac_control.stats_info->sw_stat.mem_freed
-			+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+			+= (nic->num_entries * sizeof(struct msix_entry));
 		return -ENOMEM;
 	}
 	 nic->mac_control.stats_info->sw_stat.mem_allocated
-		+= (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+		+= (nic->num_entries * sizeof(struct s2io_msix_entry));
+	memset(nic->s2io_entries, 0,
+		nic->num_entries * sizeof(struct s2io_msix_entry));
 
-	for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
-		nic->entries[i].entry = i;
-		nic->s2io_entries[i].entry = i;
+	nic->entries[0].entry = 0;
+	nic->s2io_entries[0].entry = 0;
+	nic->s2io_entries[0].in_use = MSIX_FLG;
+	nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
+	nic->s2io_entries[0].arg = &nic->mac_control.fifos;
+
+	for (i = 1; i < nic->num_entries; i++) {
+		nic->entries[i].entry = ((i - 1) * 8) + 1;
+		nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
 		nic->s2io_entries[i].arg = NULL;
 		nic->s2io_entries[i].in_use = 0;
 	}
 
-	tx_mat = readq(&bar0->tx_mat0_n[0]);
-	for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
-		tx_mat |= TX_MAT_SET(i, msix_indx);
-		nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
-		nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
-		nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
-	}
-	writeq(tx_mat, &bar0->tx_mat0_n[0]);
-
 	rx_mat = readq(&bar0->rx_mat);
-	for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) {
+	for (j = 0; j < nic->config.rx_ring_num; j++) {
 		rx_mat |= RX_MAT_SET(j, msix_indx);
-		nic->s2io_entries[msix_indx].arg
-			= &nic->mac_control.rings[j];
-		nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
-		nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+		nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
+		nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
+		nic->s2io_entries[j+1].in_use = MSIX_FLG;
+		msix_indx += 8;
 	}
 	writeq(rx_mat, &bar0->rx_mat);
+	readq(&bar0->rx_mat);
 
-	nic->avail_msix_vectors = 0;
-	ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+	ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
 	/* We fail init if error or we get less vectors than min required */
-	if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
-		nic->avail_msix_vectors = ret;
-		ret = pci_enable_msix(nic->pdev, nic->entries, ret);
-	}
 	if (ret) {
 		DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
 		kfree(nic->entries);
 		nic->mac_control.stats_info->sw_stat.mem_freed
-			+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+			+= (nic->num_entries * sizeof(struct msix_entry));
 		kfree(nic->s2io_entries);
 		nic->mac_control.stats_info->sw_stat.mem_freed
-		+= (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+			+= (nic->num_entries * sizeof(struct s2io_msix_entry));
 		nic->entries = NULL;
 		nic->s2io_entries = NULL;
-		nic->avail_msix_vectors = 0;
 		return -ENOMEM;
 	}
-	if (!nic->avail_msix_vectors)
-		nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
 
 	/*
 	 * To enable MSI-X, MSI also needs to be enabled, due to a bug
@@ -3919,7 +3969,7 @@
 	int i;
 	u16 msi_control;
 
-	for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
+	for (i = 0; i < sp->num_entries; i++) {
 		if (sp->s2io_entries[i].in_use ==
 			MSIX_REGISTERED_SUCCESS) {
 			int vector = sp->entries[i].vector;
@@ -3975,29 +4025,6 @@
 	netif_carrier_off(dev);
 	sp->last_link_state = 0;
 
-	if (sp->config.intr_type == MSI_X) {
-		int ret = s2io_enable_msi_x(sp);
-
-		if (!ret) {
-			ret = s2io_test_msi(sp);
-			/* rollback MSI-X, will re-enable during add_isr() */
-			remove_msix_isr(sp);
-		}
-		if (ret) {
-
-			DBG_PRINT(ERR_DBG,
-			  "%s: MSI-X requested but failed to enable\n",
-			  dev->name);
-			sp->config.intr_type = INTA;
-		}
-	}
-
-	/* NAPI doesn't work well with MSI(X) */
-	 if (sp->config.intr_type != INTA) {
-		if(sp->config.napi)
-			sp->config.napi = 0;
-	}
-
 	/* Initialize H/W and enable interrupts */
 	err = s2io_card_up(sp);
 	if (err) {
@@ -4020,12 +4047,12 @@
 		if (sp->entries) {
 			kfree(sp->entries);
 			sp->mac_control.stats_info->sw_stat.mem_freed
-			+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+			+= (sp->num_entries * sizeof(struct msix_entry));
 		}
 		if (sp->s2io_entries) {
 			kfree(sp->s2io_entries);
 			sp->mac_control.stats_info->sw_stat.mem_freed
-			+= (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+			+= (sp->num_entries * sizeof(struct s2io_msix_entry));
 		}
 	}
 	return err;
@@ -4327,40 +4354,65 @@
 	mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
 }
 
-static int s2io_chk_rx_buffers(struct ring_info *ring)
-{
-	if (fill_rx_buffers(ring) == -ENOMEM) {
-		DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
-		DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
-	}
-	return 0;
-}
-
 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
 {
 	struct ring_info *ring = (struct ring_info *)dev_id;
 	struct s2io_nic *sp = ring->nic;
+	struct XENA_dev_config __iomem *bar0 = sp->bar0;
+	struct net_device *dev = sp->dev;
 
-	if (!is_s2io_card_up(sp))
+	if (unlikely(!is_s2io_card_up(sp)))
 		return IRQ_HANDLED;
 
-	rx_intr_handler(ring);
-	s2io_chk_rx_buffers(ring);
+	if (sp->config.napi) {
+		u8 __iomem *addr = NULL;
+		u8 val8 = 0;
+
+		addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+		addr += (7 - ring->ring_no);
+		val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
+		writeb(val8, addr);
+		val8 = readb(addr);
+		netif_rx_schedule(dev, &ring->napi);
+	} else {
+		rx_intr_handler(ring, 0);
+		s2io_chk_rx_buffers(ring);
+	}
 
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
 {
-	struct fifo_info *fifo = (struct fifo_info *)dev_id;
-	struct s2io_nic *sp = fifo->nic;
+	int i;
+	struct fifo_info *fifos = (struct fifo_info *)dev_id;
+	struct s2io_nic *sp = fifos->nic;
+	struct XENA_dev_config __iomem *bar0 = sp->bar0;
+	struct config_param *config  = &sp->config;
+	u64 reason;
 
-	if (!is_s2io_card_up(sp))
+	if (unlikely(!is_s2io_card_up(sp)))
+		return IRQ_NONE;
+
+	reason = readq(&bar0->general_int_status);
+	if (unlikely(reason == S2IO_MINUS_ONE))
+		/* Nothing much can be done. Get out */
 		return IRQ_HANDLED;
 
-	tx_intr_handler(fifo);
+	writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
+
+	if (reason & GEN_INTR_TXTRAFFIC)
+		writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
+
+	for (i = 0; i < config->tx_fifo_num; i++)
+		tx_intr_handler(&fifos[i]);
+
+	writeq(sp->general_int_mask, &bar0->general_int_mask);
+	readl(&bar0->general_int_status);
+
 	return IRQ_HANDLED;
 }
+
 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
 {
 	struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -4762,14 +4814,10 @@
 
 		if (config->napi) {
 			if (reason & GEN_INTR_RXTRAFFIC) {
-				if (likely(netif_rx_schedule_prep(dev,
-							&sp->napi))) {
-					__netif_rx_schedule(dev, &sp->napi);
-					writeq(S2IO_MINUS_ONE,
-					       &bar0->rx_traffic_mask);
-				} else
-					writeq(S2IO_MINUS_ONE,
-					       &bar0->rx_traffic_int);
+				netif_rx_schedule(dev, &sp->napi);
+				writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
+				writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
+				readl(&bar0->rx_traffic_int);
 			}
 		} else {
 			/*
@@ -4781,7 +4829,7 @@
 				writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
 
 			for (i = 0; i < config->rx_ring_num; i++)
-				rx_intr_handler(&mac_control->rings[i]);
+				rx_intr_handler(&mac_control->rings[i], 0);
 		}
 
 		/*
@@ -6984,62 +7032,62 @@
 
 	/* After proper initialization of H/W, register ISR */
 	if (sp->config.intr_type == MSI_X) {
-		int i, msix_tx_cnt=0,msix_rx_cnt=0;
+		int i, msix_rx_cnt = 0;
 
-		for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
-			if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
-				sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+		for (i = 0; i < sp->num_entries; i++) {
+			if (sp->s2io_entries[i].in_use == MSIX_FLG) {
+				if (sp->s2io_entries[i].type ==
+					MSIX_RING_TYPE) {
+					sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+						dev->name, i);
+					err = request_irq(sp->entries[i].vector,
+						s2io_msix_ring_handle, 0,
+						sp->desc[i],
+						sp->s2io_entries[i].arg);
+				} else if (sp->s2io_entries[i].type ==
+					MSIX_ALARM_TYPE) {
+					sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
 					dev->name, i);
-				err = request_irq(sp->entries[i].vector,
-					  s2io_msix_fifo_handle, 0, sp->desc[i],
-						  sp->s2io_entries[i].arg);
-				/* If either data or addr is zero print it */
-				if(!(sp->msix_info[i].addr &&
-					sp->msix_info[i].data)) {
-					DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
-						"Data:0x%llx\n",sp->desc[i],
-						(unsigned long long)
-						sp->msix_info[i].addr,
-						(unsigned long long)
-						sp->msix_info[i].data);
-				} else {
-					msix_tx_cnt++;
+					err = request_irq(sp->entries[i].vector,
+						s2io_msix_fifo_handle, 0,
+						sp->desc[i],
+						sp->s2io_entries[i].arg);
+
 				}
-			} else {
-				sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
-					dev->name, i);
-				err = request_irq(sp->entries[i].vector,
-					  s2io_msix_ring_handle, 0, sp->desc[i],
-						  sp->s2io_entries[i].arg);
-				/* If either data or addr is zero print it */
-				if(!(sp->msix_info[i].addr &&
+				/* if either data or addr is zero print it. */
+				if (!(sp->msix_info[i].addr &&
 					sp->msix_info[i].data)) {
-					DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
-						"Data:0x%llx\n",sp->desc[i],
+					DBG_PRINT(ERR_DBG,
+						"%s @Addr:0x%llx Data:0x%llx\n",
+						sp->desc[i],
 						(unsigned long long)
 						sp->msix_info[i].addr,
 						(unsigned long long)
-						sp->msix_info[i].data);
-				} else {
+						ntohl(sp->msix_info[i].data));
+				} else
 					msix_rx_cnt++;
+				if (err) {
+					remove_msix_isr(sp);
+
+					DBG_PRINT(ERR_DBG,
+						"%s:MSI-X-%d registration "
+						"failed\n", dev->name, i);
+
+					DBG_PRINT(ERR_DBG,
+						"%s: Defaulting to INTA\n",
+						dev->name);
+					sp->config.intr_type = INTA;
+					break;
 				}
+				sp->s2io_entries[i].in_use =
+					MSIX_REGISTERED_SUCCESS;
 			}
-			if (err) {
-				remove_msix_isr(sp);
-				DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
-					  "failed\n", dev->name, i);
-				DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n",
-						 dev->name);
-				sp->config.intr_type = INTA;
-				break;
-			}
-			sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
 		}
 		if (!err) {
-			printk(KERN_INFO "MSI-X-TX %d entries enabled\n",
-				msix_tx_cnt);
 			printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
-				msix_rx_cnt);
+				--msix_rx_cnt);
+			DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
+						" through alarm vector\n");
 		}
 	}
 	if (sp->config.intr_type == INTA) {
@@ -7080,8 +7128,15 @@
 	clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
 
 	/* Disable napi */
-	if (config->napi)
-		napi_disable(&sp->napi);
+	if (sp->config.napi) {
+		int off = 0;
+		if (config->intr_type ==  MSI_X) {
+			for (; off < sp->config.rx_ring_num; off++)
+				napi_disable(&sp->mac_control.rings[off].napi);
+			}
+		else
+			napi_disable(&sp->napi);
+	}
 
 	/* disable Tx and Rx traffic on the NIC */
 	if (do_io)
@@ -7173,8 +7228,15 @@
 	}
 
 	/* Initialise napi */
-	if (config->napi)
-		napi_enable(&sp->napi);
+	if (config->napi) {
+		int i;
+		if (config->intr_type ==  MSI_X) {
+			for (i = 0; i < sp->config.rx_ring_num; i++)
+				napi_enable(&sp->mac_control.rings[i].napi);
+		} else {
+			napi_enable(&sp->napi);
+		}
+	}
 
 	/* Maintain the state prior to the open */
 	if (sp->promisc_flg)
@@ -7217,7 +7279,7 @@
 	/*  Enable select interrupts */
 	en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
 	if (sp->config.intr_type != INTA)
-		en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+		en_dis_able_nic_intrs(sp, TX_TRAFFIC_INTR, ENABLE_INTRS);
 	else {
 		interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
 		interruptible |= TX_PIC_INTR;
@@ -7615,9 +7677,6 @@
 		rx_ring_num = MAX_RX_RINGS;
 	}
 
-	if (*dev_intr_type != INTA)
-		napi = 0;
-
 	if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
 		DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
 			  "Defaulting to INTA\n");
@@ -7918,8 +7977,6 @@
 	 * will use eth_mac_addr() for  dev->set_mac_address
 	 * mac address will be set every time dev->open() is called
 	 */
-	netif_napi_add(dev, &sp->napi, s2io_poll, 32);
-
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = s2io_netpoll;
 #endif
@@ -7963,6 +8020,32 @@
 		}
 	}
 
+	if (sp->config.intr_type == MSI_X) {
+		sp->num_entries = config->rx_ring_num + 1;
+		ret = s2io_enable_msi_x(sp);
+
+		if (!ret) {
+			ret = s2io_test_msi(sp);
+			/* rollback MSI-X, will re-enable during add_isr() */
+			remove_msix_isr(sp);
+		}
+		if (ret) {
+
+			DBG_PRINT(ERR_DBG,
+			  "%s: MSI-X requested but failed to enable\n",
+			  dev->name);
+			sp->config.intr_type = INTA;
+		}
+	}
+
+	if (config->intr_type ==  MSI_X) {
+		for (i = 0; i < config->rx_ring_num ; i++)
+			netif_napi_add(dev, &mac_control->rings[i].napi,
+				s2io_poll_msix, 64);
+	} else {
+		netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
+	}
+
 	/* Not needed for Herc */
 	if (sp->device_type & XFRAME_I_DEVICE) {
 		/*
@@ -8013,6 +8096,11 @@
 	/* store mac addresses from CAM to s2io_nic structure */
 	do_s2io_store_unicast_mc(sp);
 
+	/* Configure MSIX vector for number of rings configured plus one */
+	if ((sp->device_type == XFRAME_II_DEVICE) &&
+		(config->intr_type == MSI_X))
+		sp->num_entries = config->rx_ring_num + 1;
+
 	 /* Store the values of the MSIX table in the s2io_nic structure */
 	store_xmsi_data(sp);
 	/* reset Nic and bring it to known state */
@@ -8078,8 +8166,14 @@
 		    break;
 	}
 
-	if (napi)
+	switch (sp->config.napi) {
+	case 0:
+		DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
+		break;
+	case 1:
 		DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
+		break;
+	}
 
 	DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
 		sp->config.tx_fifo_num);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 0709ebae..4706f7f 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -706,7 +706,7 @@
 	/* per-ring buffer counter */
 	u32 rx_bufs_left;
 
-	#define MAX_LRO_SESSIONS	32
+#define MAX_LRO_SESSIONS       32
 	struct lro lro0_n[MAX_LRO_SESSIONS];
 	u8		lro;
 
@@ -725,6 +725,11 @@
 	/* copy of sp->pdev pointer */
 	struct pci_dev *pdev;
 
+	/* Per ring napi struct */
+	struct napi_struct napi;
+
+	unsigned long interrupt_count;
+
 	/*
 	 *  Place holders for the virtual and physical addresses of
 	 *  all the Rx Blocks
@@ -841,7 +846,7 @@
  * Structure to keep track of the MSI-X vectors and the corresponding
  * argument registered against each vector
  */
-#define MAX_REQUESTED_MSI_X	17
+#define MAX_REQUESTED_MSI_X	9
 struct s2io_msix_entry
 {
 	u16 vector;
@@ -849,8 +854,8 @@
 	void *arg;
 
 	u8 type;
-#define	MSIX_FIFO_TYPE	1
-#define	MSIX_RING_TYPE	2
+#define        MSIX_ALARM_TYPE         1
+#define        MSIX_RING_TYPE          2
 
 	u8 in_use;
 #define MSIX_REGISTERED_SUCCESS	0xAA
@@ -877,7 +882,6 @@
 	 */
 	int pkts_to_process;
 	struct net_device *dev;
-	struct napi_struct napi;
 	struct mac_info mac_control;
 	struct config_param config;
 	struct pci_dev *pdev;
@@ -948,6 +952,7 @@
 	*/
 	u8 other_fifo_idx;
 
+	struct napi_struct napi;
 	/*  after blink, the adapter must be restored with original
 	 *  values.
 	 */
@@ -962,6 +967,7 @@
 	unsigned long long start_time;
 	struct vlan_group *vlgrp;
 #define MSIX_FLG                0xA5
+	int num_entries;
 	struct msix_entry *entries;
 	int msi_detected;
 	wait_queue_head_t msi_wait;
@@ -982,6 +988,7 @@
 	u16		lro_max_aggr_per_sess;
 	volatile unsigned long state;
 	u64		general_int_mask;
+
 #define VPD_STRING_LEN 80
 	u8  product_name[VPD_STRING_LEN];
 	u8  serial_num[VPD_STRING_LEN];
@@ -1103,7 +1110,7 @@
 static int init_shared_mem(struct s2io_nic *sp);
 static void free_shared_mem(struct s2io_nic *sp);
 static int init_nic(struct s2io_nic *nic);
-static void rx_intr_handler(struct ring_info *ring_data);
+static int rx_intr_handler(struct ring_info *ring_data, int budget);
 static void tx_intr_handler(struct fifo_info *fifo_data);
 static void s2io_handle_errors(void * dev_id);
 
@@ -1114,7 +1121,8 @@
 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
 static void s2io_link(struct s2io_nic * sp, int link);
 static void s2io_reset(struct s2io_nic * sp);
-static int s2io_poll(struct napi_struct *napi, int budget);
+static int s2io_poll_msix(struct napi_struct *napi, int budget);
+static int s2io_poll_inta(struct napi_struct *napi, int budget);
 static void s2io_init_pci(struct s2io_nic * sp);
 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr);
 static void s2io_alarm_handle(unsigned long data);
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 888b7de..33bb18f 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -179,8 +179,7 @@
 #define SBMAC_MAX_TXDESCR	256
 #define SBMAC_MAX_RXDESCR	256
 
-#define ETHER_ALIGN	2
-#define ETHER_ADDR_LEN	6
+#define ETHER_ADDR_LEN		6
 #define ENET_PACKET_SIZE	1518
 /*#define ENET_PACKET_SIZE	9216 */
 
@@ -262,8 +261,6 @@
 	spinlock_t		sbm_lock;	/* spin lock */
 	int			sbm_devflags;	/* current device flags */
 
-	int			sbm_buffersize;
-
 	/*
 	 * Controller-specific things
 	 */
@@ -305,10 +302,11 @@
 static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
 			  int txrx, int maxdescr);
 static void sbdma_channel_start(struct sbmacdma *d, int rxtx);
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *m);
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+			       struct sk_buff *m);
 static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m);
 static void sbdma_emptyring(struct sbmacdma *d);
-static void sbdma_fillring(struct sbmacdma *d);
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d);
 static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d,
 			    int work_to_do, int poll);
 static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d,
@@ -777,16 +775,13 @@
 	d->sbdma_remptr = NULL;
 }
 
-static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
+static inline void sbdma_align_skb(struct sk_buff *skb,
+				   unsigned int power2, unsigned int offset)
 {
-	unsigned long addr;
-	unsigned long newaddr;
+	unsigned char *addr = skb->data;
+	unsigned char *newaddr = PTR_ALIGN(addr, power2);
 
-	addr = (unsigned long) skb->data;
-
-	newaddr = (addr + power2 - 1) & ~(power2 - 1);
-
-	skb_reserve(skb,newaddr-addr+offset);
+	skb_reserve(skb, newaddr - addr + offset);
 }
 
 
@@ -797,7 +792,8 @@
  *  this queues a buffer for inbound packets.
  *
  *  Input parameters:
- *  	   d - DMA channel descriptor
+ *	   sc - softc structure
+ *  	    d - DMA channel descriptor
  * 	   sb - sk_buff to add, or NULL if we should allocate one
  *
  *  Return value:
@@ -806,8 +802,10 @@
  ********************************************************************* */
 
 
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+			       struct sk_buff *sb)
 {
+	struct net_device *dev = sc->sbm_dev;
 	struct sbdmadscr *dsc;
 	struct sbdmadscr *nextdsc;
 	struct sk_buff *sb_new = NULL;
@@ -848,14 +846,16 @@
 	 */
 
 	if (sb == NULL) {
-		sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
+		sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE +
+					       SMP_CACHE_BYTES * 2 +
+					       NET_IP_ALIGN);
 		if (sb_new == NULL) {
 			pr_info("%s: sk_buff allocation failed\n",
 			       d->sbdma_eth->sbm_dev->name);
 			return -ENOBUFS;
 		}
 
-		sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
+		sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN);
 	}
 	else {
 		sb_new = sb;
@@ -874,10 +874,10 @@
 	 * Do not interrupt per DMA transfer.
 	 */
 	dsc->dscr_a = virt_to_phys(sb_new->data) |
-		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0;
+		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0;
 #else
 	dsc->dscr_a = virt_to_phys(sb_new->data) |
-		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
+		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) |
 		M_DMA_DSCRA_INTERRUPT;
 #endif
 
@@ -1032,18 +1032,19 @@
  *  with sk_buffs
  *
  *  Input parameters:
- *  	   d - DMA channel
+ *	   sc - softc structure
+ *  	    d - DMA channel
  *
  *  Return value:
  *  	   nothing
  ********************************************************************* */
 
-static void sbdma_fillring(struct sbmacdma *d)
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d)
 {
 	int idx;
 
-	for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
-		if (sbdma_add_rcvbuffer(d,NULL) != 0)
+	for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) {
+		if (sbdma_add_rcvbuffer(sc, d, NULL) != 0)
 			break;
 	}
 }
@@ -1159,10 +1160,11 @@
 			 * packet and put it right back on the receive ring.
 			 */
 
-			if (unlikely (sbdma_add_rcvbuffer(d,NULL) ==
-				      -ENOBUFS)) {
+			if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) ==
+				     -ENOBUFS)) {
 				dev->stats.rx_dropped++;
-				sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
+				/* Re-add old buffer */
+				sbdma_add_rcvbuffer(sc, d, sb);
 				/* No point in continuing at the moment */
 				printk(KERN_ERR "dropped packet (1)\n");
 				d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
@@ -1212,7 +1214,7 @@
 			 * put it back on the receive ring.
 			 */
 			dev->stats.rx_errors++;
-			sbdma_add_rcvbuffer(d,sb);
+			sbdma_add_rcvbuffer(sc, d, sb);
 		}
 
 
@@ -1570,7 +1572,7 @@
 	 * Fill the receive ring
 	 */
 
-	sbdma_fillring(&(s->sbm_rxdma));
+	sbdma_fillring(s, &(s->sbm_rxdma));
 
 	/*
 	 * Turn on the rest of the bits in the enable register
@@ -2312,13 +2314,6 @@
 		dev->dev_addr[i] = eaddr[i];
 	}
 
-
-	/*
-	 * Init packet size
-	 */
-
-	sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
-
 	/*
 	 * Initialize context (get pointers to registers and stuff), then
 	 * allocate the memory for the descriptor tables.
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index f64a860..61955f8 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -953,9 +953,6 @@
 	unsigned entry;
 	u32 tx_status;
 
-	if (skb_padto(skb, ETH_ZLEN))
-		return NETDEV_TX_OK;
-
 	if (unlikely(skb->len > TX_BUF_SIZE)) {
 		dev->stats.tx_dropped++;
 		goto out;
@@ -975,6 +972,11 @@
 	skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
 
 	len = skb->len;
+	if (len < ETH_ZLEN) {
+		memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
+				0, ETH_ZLEN - len);
+		len = ETH_ZLEN;
+	}
 
 	wmb();
 
diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h
index 2806201..2c79d27 100644
--- a/drivers/net/sfc/bitfield.h
+++ b/drivers/net/sfc/bitfield.h
@@ -483,7 +483,7 @@
 #endif
 
 #define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \
-	if (FALCON_REV(efx) >= FALCON_REV_B0) {			   \
+	if (falcon_rev(efx) >= FALCON_REV_B0) {			   \
 		EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \
 	} else { \
 		EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \
@@ -491,7 +491,7 @@
 } while (0)
 
 #define EFX_QWORD_FIELD_VER(efx, qword, field)	\
-	(FALCON_REV(efx) >= FALCON_REV_B0 ?	\
+	(falcon_rev(efx) >= FALCON_REV_B0 ?	\
 	 EFX_QWORD_FIELD((qword), field##_B0) :	\
 	 EFX_QWORD_FIELD((qword), field##_A1))
 
@@ -501,8 +501,5 @@
 #define DMA_ADDR_T_WIDTH	(8 * sizeof(dma_addr_t))
 #define EFX_DMA_TYPE_WIDTH(width) \
 	(((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH)
-#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \
-			  ~((u64) 0) : ~((u32) 0))
-#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK)
 
 #endif /* EFX_BITFIELD_H */
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index eecaa6d..7fc0328 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -27,10 +27,8 @@
 	struct efx_blinker *bl = &efx->board_info.blinker;
 	efx->board_info.set_fault_led(efx, bl->state);
 	bl->state = !bl->state;
-	if (bl->resubmit) {
-		bl->timer.expires = jiffies + BLINK_INTERVAL;
-		add_timer(&bl->timer);
-	}
+	if (bl->resubmit)
+		mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
 }
 
 static void board_blink(struct efx_nic *efx, int blink)
@@ -44,8 +42,7 @@
 		blinker->state = 0;
 		setup_timer(&blinker->timer, blink_led_timer,
 			    (unsigned long)efx);
-		blinker->timer.expires = jiffies + BLINK_INTERVAL;
-		add_timer(&blinker->timer);
+		mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
 	} else {
 		blinker->resubmit = 0;
 		if (blinker->timer.function)
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 418f2e5..4497606 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -199,11 +199,12 @@
  */
 static inline void efx_channel_processed(struct efx_channel *channel)
 {
-	/* Write to EVQ_RPTR_REG.  If a new event arrived in a race
-	 * with finishing processing, a new interrupt will be raised.
-	 */
+	/* The interrupt handler for this channel may set work_pending
+	 * as soon as we acknowledge the events we've seen.  Make sure
+	 * it's cleared before then. */
 	channel->work_pending = 0;
-	smp_wmb(); /* Ensure channel updated before any new interrupt. */
+	smp_wmb();
+
 	falcon_eventq_read_ack(channel);
 }
 
@@ -265,7 +266,7 @@
 	napi_disable(&channel->napi_str);
 
 	/* Poll the channel */
-	(void) efx_process_channel(channel, efx->type->evq_size);
+	efx_process_channel(channel, efx->type->evq_size);
 
 	/* Ack the eventq. This may cause an interrupt to be generated
 	 * when they are reenabled */
@@ -317,26 +318,6 @@
  *
  *************************************************************************/
 
-/* Setup per-NIC RX buffer parameters.
- * Calculate the rx buffer allocation parameters required to support
- * the current MTU, including padding for header alignment and overruns.
- */
-static void efx_calc_rx_buffer_params(struct efx_nic *efx)
-{
-	unsigned int order, len;
-
-	len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
-	       EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
-	       efx->type->rx_buffer_padding);
-
-	/* Calculate page-order */
-	for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order)
-		;
-
-	efx->rx_buffer_len = len;
-	efx->rx_buffer_order = order;
-}
-
 static int efx_probe_channel(struct efx_channel *channel)
 {
 	struct efx_tx_queue *tx_queue;
@@ -387,7 +368,14 @@
 	struct efx_channel *channel;
 	int rc = 0;
 
-	efx_calc_rx_buffer_params(efx);
+	/* Calculate the rx buffer allocation parameters required to
+	 * support the current MTU, including padding for header
+	 * alignment and overruns.
+	 */
+	efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
+			      EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+			      efx->type->rx_buffer_padding);
+	efx->rx_buffer_order = get_order(efx->rx_buffer_len);
 
 	/* Initialise the channels */
 	efx_for_each_channel(channel, efx) {
@@ -440,9 +428,12 @@
 		netif_napi_add(channel->napi_dev, &channel->napi_str,
 			       efx_poll, napi_weight);
 
+	/* The interrupt handler for this channel may set work_pending
+	 * as soon as we enable it.  Make sure it's cleared before
+	 * then.  Similarly, make sure it sees the enabled flag set. */
 	channel->work_pending = 0;
 	channel->enabled = 1;
-	smp_wmb(); /* ensure channel updated before first interrupt */
+	smp_wmb();
 
 	napi_enable(&channel->napi_str);
 
@@ -704,7 +695,7 @@
 	mutex_unlock(&efx->mac_lock);
 
 	/* Serialise against efx_set_multicast_list() */
-	if (NET_DEV_REGISTERED(efx)) {
+	if (efx_dev_registered(efx)) {
 		netif_tx_lock_bh(efx->net_dev);
 		netif_tx_unlock_bh(efx->net_dev);
 	}
@@ -791,22 +782,23 @@
 	efx->membase = ioremap_nocache(efx->membase_phys,
 				       efx->type->mem_map_size);
 	if (!efx->membase) {
-		EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n",
-			efx->type->mem_bar, efx->membase_phys,
+		EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n",
+			efx->type->mem_bar,
+			(unsigned long long)efx->membase_phys,
 			efx->type->mem_map_size);
 		rc = -ENOMEM;
 		goto fail4;
 	}
-	EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n",
-		efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size,
-		efx->membase);
+	EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n",
+		efx->type->mem_bar, (unsigned long long)efx->membase_phys,
+		efx->type->mem_map_size, efx->membase);
 
 	return 0;
 
  fail4:
 	release_mem_region(efx->membase_phys, efx->type->mem_map_size);
  fail3:
-	efx->membase_phys = 0UL;
+	efx->membase_phys = 0;
  fail2:
 	pci_disable_device(efx->pci_dev);
  fail1:
@@ -824,7 +816,7 @@
 
 	if (efx->membase_phys) {
 		pci_release_region(efx->pci_dev, efx->type->mem_bar);
-		efx->membase_phys = 0UL;
+		efx->membase_phys = 0;
 	}
 
 	pci_disable_device(efx->pci_dev);
@@ -1043,7 +1035,7 @@
 		return;
 	if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT))
 		return;
-	if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev))
+	if (efx_dev_registered(efx) && !netif_running(efx->net_dev))
 		return;
 
 	/* Mark the port as enabled so port reconfigurations can start, then
@@ -1073,9 +1065,8 @@
 	cancel_delayed_work_sync(&efx->monitor_work);
 
 	/* Ensure that all RX slow refills are complete. */
-	efx_for_each_rx_queue(rx_queue, efx) {
+	efx_for_each_rx_queue(rx_queue, efx)
 		cancel_delayed_work_sync(&rx_queue->work);
-	}
 
 	/* Stop scheduled port reconfigurations */
 	cancel_work_sync(&efx->reconfigure_work);
@@ -1101,9 +1092,10 @@
 	falcon_disable_interrupts(efx);
 	if (efx->legacy_irq)
 		synchronize_irq(efx->legacy_irq);
-	efx_for_each_channel_with_interrupt(channel, efx)
+	efx_for_each_channel_with_interrupt(channel, efx) {
 		if (channel->irq)
 			synchronize_irq(channel->irq);
+	}
 
 	/* Stop all NAPI processing and synchronous rx refills */
 	efx_for_each_channel(channel, efx)
@@ -1125,7 +1117,7 @@
 	/* Stop the kernel transmit interface late, so the watchdog
 	 * timer isn't ticking over the flush */
 	efx_stop_queue(efx);
-	if (NET_DEV_REGISTERED(efx)) {
+	if (efx_dev_registered(efx)) {
 		netif_tx_lock_bh(efx->net_dev);
 		netif_tx_unlock_bh(efx->net_dev);
 	}
@@ -1344,13 +1336,17 @@
 	return 0;
 }
 
-/* Context: process, dev_base_lock held, non-blocking. */
+/* Context: process, dev_base_lock or RTNL held, non-blocking. */
 static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
 {
 	struct efx_nic *efx = net_dev->priv;
 	struct efx_mac_stats *mac_stats = &efx->mac_stats;
 	struct net_device_stats *stats = &net_dev->stats;
 
+	/* Update stats if possible, but do not wait if another thread
+	 * is updating them (or resetting the NIC); slightly stale
+	 * stats are acceptable.
+	 */
 	if (!spin_trylock(&efx->stats_lock))
 		return stats;
 	if (efx->state == STATE_RUNNING) {
@@ -1494,7 +1490,7 @@
 static int efx_netdev_event(struct notifier_block *this,
 			    unsigned long event, void *ptr)
 {
-	struct net_device *net_dev = (struct net_device *)ptr;
+	struct net_device *net_dev = ptr;
 
 	if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) {
 		struct efx_nic *efx = net_dev->priv;
@@ -1563,7 +1559,7 @@
 	efx_for_each_tx_queue(tx_queue, efx)
 		efx_release_tx_buffers(tx_queue);
 
-	if (NET_DEV_REGISTERED(efx)) {
+	if (efx_dev_registered(efx)) {
 		strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
 		unregister_netdev(efx->net_dev);
 	}
@@ -1688,7 +1684,7 @@
 	if (method == RESET_TYPE_DISABLE) {
 		/* Reinitialise the device anyway so the driver unload sequence
 		 * can talk to the external SRAM */
-		(void) falcon_init_nic(efx);
+		falcon_init_nic(efx);
 		rc = -EIO;
 		goto fail4;
 	}
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index b57cc68..d3f749c 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -116,17 +116,8 @@
  **************************************************************************
  */
 
-/* DMA address mask (up to 46-bit, avoiding compiler warnings)
- *
- * Note that it is possible to have a platform with 64-bit longs and
- * 32-bit DMA addresses, or vice versa.  EFX_DMA_MASK takes care of the
- * platform DMA mask.
- */
-#if BITS_PER_LONG == 64
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL)
-#else
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL)
-#endif
+/* DMA address mask */
+#define FALCON_DMA_MASK DMA_BIT_MASK(46)
 
 /* TX DMA length mask (13-bit) */
 #define FALCON_TX_DMA_MASK (4096 - 1)
@@ -145,7 +136,7 @@
 #define PCI_EXP_LNKSTA_LNK_WID_LBN	4
 
 #define FALCON_IS_DUAL_FUNC(efx)		\
-	(FALCON_REV(efx) < FALCON_REV_B0)
+	(falcon_rev(efx) < FALCON_REV_B0)
 
 /**************************************************************************
  *
@@ -465,7 +456,7 @@
 			      TX_DESCQ_TYPE, 0,
 			      TX_NON_IP_DROP_DIS_B0, 1);
 
-	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+	if (falcon_rev(efx) >= FALCON_REV_B0) {
 		int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM);
 		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum);
 		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum);
@@ -474,7 +465,7 @@
 	falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
 			   tx_queue->queue);
 
-	if (FALCON_REV(efx) < FALCON_REV_B0) {
+	if (falcon_rev(efx) < FALCON_REV_B0) {
 		efx_oword_t reg;
 
 		BUG_ON(tx_queue->queue >= 128); /* HW limit */
@@ -635,7 +626,7 @@
 	efx_oword_t rx_desc_ptr;
 	struct efx_nic *efx = rx_queue->efx;
 	int rc;
-	int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0;
+	int is_b0 = falcon_rev(efx) >= FALCON_REV_B0;
 	int iscsi_digest_en = is_b0;
 
 	EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n",
@@ -822,10 +813,10 @@
 		tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
 		tx_queue = &efx->tx_queue[tx_ev_q_label];
 
-		if (NET_DEV_REGISTERED(efx))
+		if (efx_dev_registered(efx))
 			netif_tx_lock(efx->net_dev);
 		falcon_notify_tx_desc(tx_queue);
-		if (NET_DEV_REGISTERED(efx))
+		if (efx_dev_registered(efx))
 			netif_tx_unlock(efx->net_dev);
 	} else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) &&
 		   EFX_WORKAROUND_10727(efx)) {
@@ -884,7 +875,7 @@
 						   RX_EV_TCP_UDP_CHKSUM_ERR);
 	rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR);
 	rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC);
-	rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ?
+	rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ?
 			  0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB));
 	rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR);
 
@@ -1065,7 +1056,7 @@
 	    EFX_QWORD_FIELD(*event, XG_PHY_INTR))
 		is_phy_event = 1;
 
-	if ((FALCON_REV(efx) >= FALCON_REV_B0) &&
+	if ((falcon_rev(efx) >= FALCON_REV_B0) &&
 	    EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0))
 		is_phy_event = 1;
 
@@ -1405,7 +1396,7 @@
 static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx)
 {
 	struct falcon_nic_data *nic_data = efx->nic_data;
-	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	efx_oword_t *int_ker = efx->irq_status.addr;
 	efx_oword_t fatal_intr;
 	int error, mem_perr;
 	static int n_int_errors;
@@ -1451,8 +1442,8 @@
  */
 static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id)
 {
-	struct efx_nic *efx = (struct efx_nic *)dev_id;
-	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	struct efx_nic *efx = dev_id;
+	efx_oword_t *int_ker = efx->irq_status.addr;
 	struct efx_channel *channel;
 	efx_dword_t reg;
 	u32 queues;
@@ -1489,8 +1480,8 @@
 
 static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
 {
-	struct efx_nic *efx = (struct efx_nic *)dev_id;
-	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	struct efx_nic *efx = dev_id;
+	efx_oword_t *int_ker = efx->irq_status.addr;
 	struct efx_channel *channel;
 	int syserr;
 	int queues;
@@ -1542,9 +1533,9 @@
  */
 static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id)
 {
-	struct efx_channel *channel = (struct efx_channel *)dev_id;
+	struct efx_channel *channel = dev_id;
 	struct efx_nic *efx = channel->efx;
-	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	efx_oword_t *int_ker = efx->irq_status.addr;
 	int syserr;
 
 	efx->last_irq_cpu = raw_smp_processor_id();
@@ -1572,7 +1563,7 @@
 	unsigned long offset;
 	efx_dword_t dword;
 
-	if (FALCON_REV(efx) < FALCON_REV_B0)
+	if (falcon_rev(efx) < FALCON_REV_B0)
 		return;
 
 	for (offset = RX_RSS_INDIR_TBL_B0;
@@ -1595,7 +1586,7 @@
 
 	if (!EFX_INT_MODE_USE_MSI(efx)) {
 		irq_handler_t handler;
-		if (FALCON_REV(efx) >= FALCON_REV_B0)
+		if (falcon_rev(efx) >= FALCON_REV_B0)
 			handler = falcon_legacy_interrupt_b0;
 		else
 			handler = falcon_legacy_interrupt_a1;
@@ -1636,12 +1627,13 @@
 	efx_oword_t reg;
 
 	/* Disable MSI/MSI-X interrupts */
-	efx_for_each_channel_with_interrupt(channel, efx)
+	efx_for_each_channel_with_interrupt(channel, efx) {
 		if (channel->irq)
 			free_irq(channel->irq, channel);
+	}
 
 	/* ACK legacy interrupt */
-	if (FALCON_REV(efx) >= FALCON_REV_B0)
+	if (falcon_rev(efx) >= FALCON_REV_B0)
 		falcon_read(efx, &reg, INT_ISR0_B0);
 	else
 		falcon_irq_ack_a1(efx);
@@ -1732,7 +1724,7 @@
 	efx_oword_t temp;
 	int count;
 
-	if ((FALCON_REV(efx) < FALCON_REV_B0) ||
+	if ((falcon_rev(efx) < FALCON_REV_B0) ||
 	    (efx->loopback_mode != LOOPBACK_NONE))
 		return;
 
@@ -1785,7 +1777,7 @@
 {
 	efx_oword_t temp;
 
-	if (FALCON_REV(efx) < FALCON_REV_B0)
+	if (falcon_rev(efx) < FALCON_REV_B0)
 		return;
 
 	/* Isolate the MAC -> RX */
@@ -1823,7 +1815,7 @@
 			     MAC_SPEED, link_speed);
 	/* On B0, MAC backpressure can be disabled and packets get
 	 * discarded. */
-	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+	if (falcon_rev(efx) >= FALCON_REV_B0) {
 		EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0,
 				    !efx->link_up);
 	}
@@ -1841,7 +1833,7 @@
 	EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc);
 
 	/* Unisolate the MAC -> RX */
-	if (FALCON_REV(efx) >= FALCON_REV_B0)
+	if (falcon_rev(efx) >= FALCON_REV_B0)
 		EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1);
 	falcon_write(efx, &reg, RX_CFG_REG_KER);
 }
@@ -1856,7 +1848,7 @@
 		return 0;
 
 	/* Statistics fetch will fail if the MAC is in TX drain */
-	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+	if (falcon_rev(efx) >= FALCON_REV_B0) {
 		efx_oword_t temp;
 		falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
 		if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
@@ -1940,7 +1932,7 @@
 static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
 			      int addr, int value)
 {
-	struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+	struct efx_nic *efx = net_dev->priv;
 	unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK;
 	efx_oword_t reg;
 
@@ -2008,7 +2000,7 @@
  * could be read, -1 will be returned. */
 static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
 {
-	struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+	struct efx_nic *efx = net_dev->priv;
 	unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK;
 	efx_oword_t reg;
 	int value = -1;
@@ -2113,7 +2105,7 @@
 	falcon_init_mdio(&efx->mii);
 
 	/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
-	if (FALCON_REV(efx) >= FALCON_REV_B0)
+	if (falcon_rev(efx) >= FALCON_REV_B0)
 		efx->flow_control = EFX_FC_RX | EFX_FC_TX;
 	else
 		efx->flow_control = EFX_FC_RX;
@@ -2373,7 +2365,7 @@
 		return -ENODEV;
 	}
 
-	switch (FALCON_REV(efx)) {
+	switch (falcon_rev(efx)) {
 	case FALCON_REV_A0:
 	case 0xff:
 		EFX_ERR(efx, "Falcon rev A0 not supported\n");
@@ -2399,7 +2391,7 @@
 		break;
 
 	default:
-		EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx));
+		EFX_ERR(efx, "Unknown Falcon rev %d\n", falcon_rev(efx));
 		return -ENODEV;
 	}
 
@@ -2419,7 +2411,7 @@
 
 	/* Allocate storage for hardware specific data */
 	nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL);
-	efx->nic_data = (void *) nic_data;
+	efx->nic_data = nic_data;
 
 	/* Determine number of ports etc. */
 	rc = falcon_probe_nic_variant(efx);
@@ -2489,13 +2481,10 @@
  */
 int falcon_init_nic(struct efx_nic *efx)
 {
-	struct falcon_nic_data *data;
 	efx_oword_t temp;
 	unsigned thresh;
 	int rc;
 
-	data = (struct falcon_nic_data *)efx->nic_data;
-
 	/* Set up the address region register. This is only needed
 	 * for the B0 FPGA, but since we are just pushing in the
 	 * reset defaults this may as well be unconditional. */
@@ -2562,7 +2551,7 @@
 
 	/* Set number of RSS queues for receive path. */
 	falcon_read(efx, &temp, RX_FILTER_CTL_REG);
-	if (FALCON_REV(efx) >= FALCON_REV_B0)
+	if (falcon_rev(efx) >= FALCON_REV_B0)
 		EFX_SET_OWORD_FIELD(temp, NUM_KER, 0);
 	else
 		EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1);
@@ -2600,7 +2589,7 @@
 	/* Prefetch threshold 2 => fetch when descriptor cache half empty */
 	EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2);
 	/* Squash TX of packets of 16 bytes or less */
-	if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
+	if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
 		EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1);
 	falcon_write(efx, &temp, TX_CFG2_REG_KER);
 
@@ -2617,7 +2606,7 @@
 	if (EFX_WORKAROUND_7575(efx))
 		EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE,
 					(3 * 4096) / 32);
-	if (FALCON_REV(efx) >= FALCON_REV_B0)
+	if (falcon_rev(efx) >= FALCON_REV_B0)
 		EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1);
 
 	/* RX FIFO flow control thresholds */
@@ -2633,7 +2622,7 @@
 	falcon_write(efx, &temp, RX_CFG_REG_KER);
 
 	/* Set destination of both TX and RX Flush events */
-	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+	if (falcon_rev(efx) >= FALCON_REV_B0) {
 		EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0);
 		falcon_write(efx, &temp, DP_CTRL_REG);
 	}
@@ -2647,7 +2636,7 @@
 
 	falcon_free_buffer(efx, &efx->irq_status);
 
-	(void) falcon_reset_hw(efx, RESET_TYPE_ALL);
+	falcon_reset_hw(efx, RESET_TYPE_ALL);
 
 	/* Release the second function after the reset */
 	if (nic_data->pci_dev2) {
diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h
index 6117403..492f9bc 100644
--- a/drivers/net/sfc/falcon.h
+++ b/drivers/net/sfc/falcon.h
@@ -23,7 +23,10 @@
 	FALCON_REV_B0 = 2,
 };
 
-#define FALCON_REV(efx) ((efx)->pci_dev->revision)
+static inline int falcon_rev(struct efx_nic *efx)
+{
+	return efx->pci_dev->revision;
+}
 
 extern struct efx_nic_type falcon_a_nic_type;
 extern struct efx_nic_type falcon_b_nic_type;
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
index 06e2d68..6d00311 100644
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ b/drivers/net/sfc/falcon_hwdefs.h
@@ -1125,7 +1125,7 @@
 	u8 port1_phy_type;
 	__le16 asic_sub_revision;
 	__le16 board_revision;
-} __attribute__ ((packed));
+} __packed;
 
 #define NVCONFIG_BASE 0x300
 #define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
@@ -1144,6 +1144,6 @@
 	__le16 board_struct_ver;
 	__le16 board_checksum;
 	struct falcon_nvconfig_board_v2 board_v2;
-} __attribute__ ((packed));
+} __packed;
 
 #endif /* EFX_FALCON_HWDEFS_H */
diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h
index ea08184..6670cdf 100644
--- a/drivers/net/sfc/falcon_io.h
+++ b/drivers/net/sfc/falcon_io.h
@@ -56,14 +56,27 @@
 #define FALCON_USE_QWORD_IO 1
 #endif
 
-#define _falcon_writeq(efx, value, reg) \
-	__raw_writeq((__force u64) (value), (efx)->membase + (reg))
-#define _falcon_writel(efx, value, reg) \
-	__raw_writel((__force u32) (value), (efx)->membase + (reg))
-#define _falcon_readq(efx, reg) \
-	((__force __le64) __raw_readq((efx)->membase + (reg)))
-#define _falcon_readl(efx, reg) \
-	((__force __le32) __raw_readl((efx)->membase + (reg)))
+#ifdef FALCON_USE_QWORD_IO
+static inline void _falcon_writeq(struct efx_nic *efx, __le64 value,
+				  unsigned int reg)
+{
+	__raw_writeq((__force u64)value, efx->membase + reg);
+}
+static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg)
+{
+	return (__force __le64)__raw_readq(efx->membase + reg);
+}
+#endif
+
+static inline void _falcon_writel(struct efx_nic *efx, __le32 value,
+				  unsigned int reg)
+{
+	__raw_writel((__force u32)value, efx->membase + reg);
+}
+static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg)
+{
+	return (__force __le32)__raw_readl(efx->membase + reg);
+}
 
 /* Writes to a normal 16-byte Falcon register, locking as appropriate. */
 static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value,
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index a74b793..55c0d97 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -221,7 +221,7 @@
 {
 	efx_dword_t reg;
 
-	if (FALCON_REV(efx) < FALCON_REV_B0)
+	if (falcon_rev(efx) < FALCON_REV_B0)
 		return 1;
 
 	/* The ISR latches, so clear it and re-read */
@@ -241,7 +241,7 @@
 {
 	efx_dword_t reg;
 
-	if ((FALCON_REV(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
+	if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
 		return;
 
 	/* Flush the ISR */
@@ -454,12 +454,12 @@
 
 		EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
 			__func__, tries);
-		(void) falcon_reset_xaui(efx);
+		falcon_reset_xaui(efx);
 		udelay(200);
 		tries--;
 	}
 
-	EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n",
+	EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n",
 		max_tries);
 	return 0;
 }
@@ -572,7 +572,7 @@
 	xaui_link_ok = falcon_xaui_link_ok(efx);
 
 	if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
-		(void) falcon_reset_xaui(efx);
+		falcon_reset_xaui(efx);
 
 	/* Call the PHY check_hw routine */
 	rc = efx->phy_op->check_hw(efx);
@@ -639,7 +639,7 @@
 	reset = ((flow_control & EFX_FC_TX) &&
 		 !(efx->flow_control & EFX_FC_TX));
 	if (EFX_WORKAROUND_11482(efx) && reset) {
-		if (FALCON_REV(efx) >= FALCON_REV_B0) {
+		if (falcon_rev(efx) >= FALCON_REV_B0) {
 			/* Recover by resetting the EM block */
 			if (efx->link_up)
 				falcon_drain_tx_fifo(efx);
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 59f261b..5e20e75 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -42,7 +42,7 @@
 #ifndef EFX_DRIVER_NAME
 #define EFX_DRIVER_NAME	"sfc"
 #endif
-#define EFX_DRIVER_VERSION	"2.2.0136"
+#define EFX_DRIVER_VERSION	"2.2"
 
 #ifdef EFX_ENABLE_DEBUG
 #define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
@@ -52,28 +52,19 @@
 #define EFX_WARN_ON_PARANOID(x) do {} while (0)
 #endif
 
-#define NET_DEV_REGISTERED(efx)					\
-	((efx)->net_dev->reg_state == NETREG_REGISTERED)
-
-/* Include net device name in log messages if it has been registered.
- * Use efx->name not efx->net_dev->name so that races with (un)registration
- * are harmless.
- */
-#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "")
-
 /* Un-rate-limited logging */
 #define EFX_ERR(efx, fmt, args...) \
-dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
 
 #define EFX_INFO(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
 
 #ifdef EFX_ENABLE_DEBUG
 #define EFX_LOG(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
 #else
 #define EFX_LOG(efx, fmt, args...) \
-dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
 #endif
 
 #define EFX_TRACE(efx, fmt, args...) do {} while (0)
@@ -90,11 +81,6 @@
 #define EFX_LOG_RL(efx, fmt, args...) \
 do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
 
-/* Kernel headers may redefine inline anyway */
-#ifndef inline
-#define inline inline __attribute__ ((always_inline))
-#endif
-
 /**************************************************************************
  *
  * Efx data structures
@@ -695,7 +681,7 @@
 	struct workqueue_struct *workqueue;
 	struct work_struct reset_work;
 	struct delayed_work monitor_work;
-	unsigned long membase_phys;
+	resource_size_t membase_phys;
 	void __iomem *membase;
 	spinlock_t biu_lock;
 	enum efx_int_mode interrupt_mode;
@@ -719,7 +705,7 @@
 
 	unsigned n_rx_nodesc_drop_cnt;
 
-	void *nic_data;
+	struct falcon_nic_data *nic_data;
 
 	struct mutex mac_lock;
 	int port_enabled;
@@ -760,6 +746,20 @@
 	void *loopback_selftest;
 };
 
+static inline int efx_dev_registered(struct efx_nic *efx)
+{
+	return efx->net_dev->reg_state == NETREG_REGISTERED;
+}
+
+/* Net device name, for inclusion in log messages if it has been registered.
+ * Use efx->name not efx->net_dev->name so that races with (un)registration
+ * are harmless.
+ */
+static inline const char *efx_dev_name(struct efx_nic *efx)
+{
+	return efx_dev_registered(efx) ? efx->name : "";
+}
+
 /**
  * struct efx_nic_type - Efx device type definition
  * @mem_bar: Memory BAR number
@@ -795,7 +795,7 @@
 	unsigned int txd_ring_mask;
 	unsigned int rxd_ring_mask;
 	unsigned int evq_size;
-	dma_addr_t max_dma_mask;
+	u64 max_dma_mask;
 	unsigned int tx_dma_mask;
 	unsigned bug5391_mask;
 
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 6706223..601b001 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -86,14 +86,17 @@
  */
 #define EFX_RXD_HEAD_ROOM 2
 
-/* Macros for zero-order pages (potentially) containing multiple RX buffers */
-#define RX_DATA_OFFSET(_data)				\
-	(((unsigned long) (_data)) & (PAGE_SIZE-1))
-#define RX_BUF_OFFSET(_rx_buf)				\
-	RX_DATA_OFFSET((_rx_buf)->data)
-
-#define RX_PAGE_SIZE(_efx)				\
-	(PAGE_SIZE * (1u << (_efx)->rx_buffer_order))
+static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf)
+{
+	/* Offset is always within one page, so we don't need to consider
+	 * the page order.
+	 */
+	return (__force unsigned long) buf->data & (PAGE_SIZE - 1);
+}
+static inline unsigned int efx_rx_buf_size(struct efx_nic *efx)
+{
+	return PAGE_SIZE << efx->rx_buffer_order;
+}
 
 
 /**************************************************************************
@@ -106,7 +109,7 @@
 static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr,
 			       void **tcpudp_hdr, u64 *hdr_flags, void *priv)
 {
-	struct efx_channel *channel = (struct efx_channel *)priv;
+	struct efx_channel *channel = priv;
 	struct iphdr *iph;
 	struct tcphdr *th;
 
@@ -131,12 +134,12 @@
 			    void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
 			    void *priv)
 {
-	struct efx_channel *channel = (struct efx_channel *)priv;
+	struct efx_channel *channel = priv;
 	struct ethhdr *eh;
 	struct iphdr *iph;
 
 	/* We support EtherII and VLAN encapsulated IPv4 */
-	eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset);
+	eh = page_address(frag->page) + frag->page_offset;
 	*mac_hdr = eh;
 
 	if (eh->h_proto == htons(ETH_P_IP)) {
@@ -269,7 +272,7 @@
 			return -ENOMEM;
 
 		dma_addr = pci_map_page(efx->pci_dev, rx_buf->page,
-					0, RX_PAGE_SIZE(efx),
+					0, efx_rx_buf_size(efx),
 					PCI_DMA_FROMDEVICE);
 
 		if (unlikely(pci_dma_mapping_error(dma_addr))) {
@@ -280,14 +283,14 @@
 
 		rx_queue->buf_page = rx_buf->page;
 		rx_queue->buf_dma_addr = dma_addr;
-		rx_queue->buf_data = ((char *) page_address(rx_buf->page) +
+		rx_queue->buf_data = (page_address(rx_buf->page) +
 				      EFX_PAGE_IP_ALIGN);
 	}
 
-	offset = RX_DATA_OFFSET(rx_queue->buf_data);
 	rx_buf->len = bytes;
-	rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
 	rx_buf->data = rx_queue->buf_data;
+	offset = efx_rx_buf_offset(rx_buf);
+	rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
 
 	/* Try to pack multiple buffers per page */
 	if (efx->rx_buffer_order == 0) {
@@ -295,7 +298,7 @@
 		rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff);
 		offset += ((bytes + 0x1ff) & ~0x1ff);
 
-		space = RX_PAGE_SIZE(efx) - offset;
+		space = efx_rx_buf_size(efx) - offset;
 		if (space >= bytes) {
 			/* Refs dropped on kernel releasing each skb */
 			get_page(rx_queue->buf_page);
@@ -344,7 +347,8 @@
 		EFX_BUG_ON_PARANOID(rx_buf->skb);
 		if (rx_buf->unmap_addr) {
 			pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr,
-				       RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE);
+				       efx_rx_buf_size(efx),
+				       PCI_DMA_FROMDEVICE);
 			rx_buf->unmap_addr = 0;
 		}
 	} else if (likely(rx_buf->skb)) {
@@ -400,9 +404,10 @@
 		return 0;
 
 	/* Record minimum fill level */
-	if (unlikely(fill_level < rx_queue->min_fill))
+	if (unlikely(fill_level < rx_queue->min_fill)) {
 		if (fill_level)
 			rx_queue->min_fill = fill_level;
+	}
 
 	/* Acquire RX add lock.  If this lock is contended, then a fast
 	 * fill must already be in progress (e.g. in the refill
@@ -552,7 +557,7 @@
 		struct skb_frag_struct frags;
 
 		frags.page = rx_buf->page;
-		frags.page_offset = RX_BUF_OFFSET(rx_buf);
+		frags.page_offset = efx_rx_buf_offset(rx_buf);
 		frags.size = rx_buf->len;
 
 		lro_receive_frags(lro_mgr, &frags, rx_buf->len,
@@ -597,7 +602,7 @@
 	if (unlikely(rx_buf->len > hdr_len)) {
 		struct skb_frag_struct *frag = skb_shinfo(skb)->frags;
 		frag->page = rx_buf->page;
-		frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len;
+		frag->page_offset = efx_rx_buf_offset(rx_buf) + hdr_len;
 		frag->size = skb->len - hdr_len;
 		skb_shinfo(skb)->nr_frags = 1;
 		skb->data_len = frag->size;
@@ -851,7 +856,8 @@
 	/* For a page that is part-way through splitting into RX buffers */
 	if (rx_queue->buf_page != NULL) {
 		pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr,
-			       RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE);
+			       efx_rx_buf_size(rx_queue->efx),
+			       PCI_DMA_FROMDEVICE);
 		__free_pages(rx_queue->buf_page,
 			     rx_queue->efx->rx_buffer_order);
 		rx_queue->buf_page = NULL;
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index cbda159..3b2de9f 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -290,7 +290,7 @@
 
 	payload = &state->payload;
 	
-	received = (struct efx_loopback_payload *)(char *) buf_ptr;
+	received = (struct efx_loopback_payload *) buf_ptr;
 	received->ip.saddr = payload->ip.saddr;
 	received->ip.check = payload->ip.check;
 	
@@ -424,10 +424,10 @@
 		 * interrupt handler. */
 		smp_wmb();
 
-		if (NET_DEV_REGISTERED(efx))
+		if (efx_dev_registered(efx))
 			netif_tx_lock_bh(efx->net_dev);
 		rc = efx_xmit(efx, tx_queue, skb);
-		if (NET_DEV_REGISTERED(efx))
+		if (efx_dev_registered(efx))
 			netif_tx_unlock_bh(efx->net_dev);
 
 		if (rc != NETDEV_TX_OK) {
@@ -453,7 +453,7 @@
 	int tx_done = 0, rx_good, rx_bad;
 	int i, rc = 0;
 
-	if (NET_DEV_REGISTERED(efx))
+	if (efx_dev_registered(efx))
 		netif_tx_lock_bh(efx->net_dev);
 
 	/* Count the number of tx completions, and decrement the refcnt. Any
@@ -465,7 +465,7 @@
 		dev_kfree_skb_any(skb);
 	}
 
-	if (NET_DEV_REGISTERED(efx))
+	if (efx_dev_registered(efx))
 		netif_tx_unlock_bh(efx->net_dev);
 
 	/* Check TX completion and received packet counts */
@@ -517,6 +517,8 @@
 		state->packet_count = min(1 << (i << 2), state->packet_count);
 		state->skbs = kzalloc(sizeof(state->skbs[0]) *
 				      state->packet_count, GFP_KERNEL);
+		if (!state->skbs)
+			return -ENOMEM;
 		state->flush = 0;
 
 		EFX_LOG(efx, "TX queue %d testing %s loopback with %d "
@@ -700,7 +702,7 @@
 	 * "flushing" so all inflight packets are dropped */
 	BUG_ON(efx->loopback_selftest);
 	state->flush = 1;
-	efx->loopback_selftest = (void *)state;
+	efx->loopback_selftest = state;
 
 	rc = efx_test_loopbacks(efx, tests, loopback_modes);
 
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 725d1a5..66a0d14 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -116,18 +116,18 @@
 
 	/* Turn off all power rails */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
 
 	/* Disable port 1 outputs on IO expander */
 	cfg = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+	efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
 
 	/* Disable port 0 outputs on IO expander */
 	cfg = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+	efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
 
 	/* Clear any over-temperature alert */
-	(void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+	efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
 }
 
 /* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
@@ -253,14 +253,14 @@
 fail3:
 	/* Turn off all power rails */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
 	/* Disable port 1 outputs on IO expander */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
 fail2:
 	/* Disable port 0 outputs on IO expander */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
 fail1:
 	return rc;
 }
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index b1cd6de..c014606 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -211,6 +211,8 @@
 	int rc = 0;
 
 	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
 	efx->phy_data = phy_data;
 
 	tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
@@ -376,7 +378,7 @@
 	 * perform a special software reset */
 	if ((phy_data->tx_disabled && !efx->tx_disabled) ||
 	    loop_change) {
-		(void) tenxpress_special_reset(efx);
+		tenxpress_special_reset(efx);
 		falcon_reset_xaui(efx);
 	}
 
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 9b436f5..5cdd082 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -387,7 +387,7 @@
 	if (unlikely(tx_queue->stopped)) {
 		fill_level = tx_queue->insert_count - tx_queue->read_count;
 		if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) {
-			EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx));
+			EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
 
 			/* Do this under netif_tx_lock(), to avoid racing
 			 * with efx_xmit(). */
@@ -639,11 +639,12 @@
 	base_dma = tsoh->dma_addr & PAGE_MASK;
 
 	p = &tx_queue->tso_headers_free;
-	while (*p != NULL)
+	while (*p != NULL) {
 		if (((unsigned long)*p & PAGE_MASK) == base_kva)
 			*p = (*p)->next;
 		else
 			p = &(*p)->next;
+	}
 
 	pci_free_consistent(pci_dev, PAGE_SIZE, (void *)base_kva, base_dma);
 }
@@ -939,9 +940,10 @@
 
 	/* Allocate a DMA-mapped header buffer. */
 	if (likely(TSOH_SIZE(st->p.header_length) <= TSOH_STD_SIZE)) {
-		if (tx_queue->tso_headers_free == NULL)
+		if (tx_queue->tso_headers_free == NULL) {
 			if (efx_tsoh_block_alloc(tx_queue))
 				return -1;
+		}
 		EFX_BUG_ON_PARANOID(!tx_queue->tso_headers_free);
 		tsoh = tx_queue->tso_headers_free;
 		tx_queue->tso_headers_free = tsoh->next;
@@ -1106,9 +1108,10 @@
 {
 	unsigned i;
 
-	if (tx_queue->buffer)
+	if (tx_queue->buffer) {
 		for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i)
 			efx_tsoh_free(tx_queue, &tx_queue->buffer[i]);
+	}
 
 	while (tx_queue->tso_headers_free != NULL)
 		efx_tsoh_block_free(tx_queue, tx_queue->tso_headers_free,
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index dca62f1..35ab19c2 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -16,7 +16,7 @@
  */
 
 #define EFX_WORKAROUND_ALWAYS(efx) 1
-#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1)
+#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
 
 /* XAUI resets if link not detected */
 #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index 3b9f9dd..f3684ad 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -85,7 +85,9 @@
 	int rc;
 
 	phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
-	efx->phy_data = (void *) phy_data;
+	if (!phy_data)
+		return -ENOMEM;
+	efx->phy_data = phy_data;
 
 	EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision"
 		 " %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f226bca..3bb6053 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1159,17 +1159,9 @@
 }
 
 #ifdef SKY2_VLAN_TAG_USED
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
 {
-	struct sky2_port *sky2 = netdev_priv(dev);
-	struct sky2_hw *hw = sky2->hw;
-	u16 port = sky2->port;
-
-	netif_tx_lock_bh(dev);
-	napi_disable(&hw->napi);
-
-	sky2->vlgrp = grp;
-	if (grp) {
+	if (onoff) {
 		sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
 			     RX_VLAN_STRIP_ON);
 		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
@@ -1180,6 +1172,19 @@
 		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
 			     TX_VLAN_TAG_OFF);
 	}
+}
+
+static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	struct sky2_hw *hw = sky2->hw;
+	u16 port = sky2->port;
+
+	netif_tx_lock_bh(dev);
+	napi_disable(&hw->napi);
+
+	sky2->vlgrp = grp;
+	sky2_set_vlan_mode(hw, port, grp != NULL);
 
 	sky2_read32(hw, B0_Y2_SP_LISR);
 	napi_enable(&hw->napi);
@@ -1418,6 +1423,10 @@
 	sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
 			   TX_RING_SIZE - 1);
 
+#ifdef SKY2_VLAN_TAG_USED
+	sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
+#endif
+
 	err = sky2_rx_start(sky2);
 	if (err)
 		goto err_out;
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index b4e7f30..1aa425b 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -111,7 +111,7 @@
 	struct hme_tx_logent *tlp;
 	unsigned long flags;
 
-	save_and_cli(flags);
+	local_irq_save(flags);
 	tlp = &tx_log[txlog_cur_entry];
 	tlp->tstamp = (unsigned int)jiffies;
 	tlp->tx_new = hp->tx_new;
@@ -119,7 +119,7 @@
 	tlp->action = a;
 	tlp->status = s;
 	txlog_cur_entry = (txlog_cur_entry + 1) & (TX_LOG_LEN - 1);
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 static __inline__ void tx_dump_log(void)
 {
diff --git a/drivers/net/tokenring/3c359.h b/drivers/net/tokenring/3c359.h
index b880cba..74cf8e1 100644
--- a/drivers/net/tokenring/3c359.h
+++ b/drivers/net/tokenring/3c359.h
@@ -264,7 +264,7 @@
 	u16 asb;
 
 	u8 __iomem *xl_mmio;
-	char *xl_card_name;
+	const char *xl_card_name;
 	struct pci_dev *pdev ; 
 	
 	spinlock_t xl_lock ; 
diff --git a/drivers/net/tokenring/olympic.h b/drivers/net/tokenring/olympic.h
index c919563..10fbba0 100644
--- a/drivers/net/tokenring/olympic.h
+++ b/drivers/net/tokenring/olympic.h
@@ -254,7 +254,7 @@
 	u8 __iomem *olympic_mmio;
 	u8 __iomem *olympic_lap;
 	struct pci_dev *pdev ; 
-	char *olympic_card_name ; 
+	const char *olympic_card_name;
 
 	spinlock_t olympic_lock ; 
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index f9d13fa..55670b5 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1729,12 +1729,15 @@
 	if (!dev)
 		return -EINVAL;
 
-	if (netif_running(dev))
-		tulip_down(dev);
+	if (!netif_running(dev))
+		goto save_state;
+
+	tulip_down(dev);
 
 	netif_device_detach(dev);
 	free_irq(dev->irq, dev);
 
+save_state:
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -1754,6 +1757,9 @@
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
+	if (!netif_running(dev))
+		return 0;
+
 	if ((retval = pci_enable_device(pdev))) {
 		printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
 		return retval;
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 2511ca7..e9e62862 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -225,6 +225,9 @@
 static const struct ethtool_ops netdev_ethtool_ops;
 static u16 read_srom_word(long, int);
 static irqreturn_t uli526x_interrupt(int, void *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev);
+#endif
 static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
 static void allocate_rx_buffer(struct uli526x_board_info *);
 static void update_cr6(u32, unsigned long);
@@ -339,6 +342,9 @@
 	dev->get_stats = &uli526x_get_stats;
 	dev->set_multicast_list = &uli526x_set_filter_mode;
 	dev->ethtool_ops = &netdev_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = &uli526x_poll;
+#endif
 	spin_lock_init(&db->lock);
 
 
@@ -681,8 +687,9 @@
 	db->cr5_data = inl(ioaddr + DCR5);
 	outl(db->cr5_data, ioaddr + DCR5);
 	if ( !(db->cr5_data & 0x180c1) ) {
-		spin_unlock_irqrestore(&db->lock, flags);
+		/* Restore CR7 to enable interrupt mask */
 		outl(db->cr7_data, ioaddr + DCR7);
+		spin_unlock_irqrestore(&db->lock, flags);
 		return IRQ_HANDLED;
 	}
 
@@ -715,6 +722,13 @@
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev)
+{
+	/* ISR grabs the irqsave lock, so this should be safe */
+	uli526x_interrupt(dev->irq, dev);
+}
+#endif
 
 /*
  *	Free TX resource after TX complete
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index ca0bdac..fb0b918 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -237,7 +237,7 @@
 	skb->dev = ugeth->dev;
 
 	out_be32(&((struct qe_bd __iomem *)bd)->buf,
-		      dma_map_single(NULL,
+		      dma_map_single(&ugeth->dev->dev,
 				     skb->data,
 				     ugeth->ug_info->uf_info.max_rx_buf_length +
 				     UCC_GETH_RX_DATA_BUF_ALIGNMENT,
@@ -2158,7 +2158,7 @@
 			continue;
 		for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) {
 			if (ugeth->tx_skbuff[i][j]) {
-				dma_unmap_single(NULL,
+				dma_unmap_single(&ugeth->dev->dev,
 						 in_be32(&((struct qe_bd __iomem *)bd)->buf),
 						 (in_be32((u32 __iomem *)bd) &
 						  BD_LENGTH_MASK),
@@ -2186,7 +2186,7 @@
 			bd = ugeth->p_rx_bd_ring[i];
 			for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) {
 				if (ugeth->rx_skbuff[i][j]) {
-					dma_unmap_single(NULL,
+					dma_unmap_single(&ugeth->dev->dev,
 						in_be32(&((struct qe_bd __iomem *)bd)->buf),
 						ugeth->ug_info->
 						uf_info.max_rx_buf_length +
@@ -3406,7 +3406,8 @@
 
 	/* set up the buffer descriptor */
 	out_be32(&((struct qe_bd __iomem *)bd)->buf,
-		      dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE));
+		      dma_map_single(&ugeth->dev->dev, skb->data,
+			      skb->len, DMA_TO_DEVICE));
 
 	/* printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); */
 
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 299b7f1..f5839c4 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -73,6 +73,7 @@
 	"tx-frames-ok",
 	"tx-excessive-differ-frames",
 	"tx-256-511-frames",
+	"tx-512-1023-frames",
 	"tx-1024-1518-frames",
 	"tx-jumbo-frames",
 };
@@ -308,7 +309,7 @@
 		buf += UEC_TX_FW_STATS_LEN * ETH_GSTRING_LEN;
 	}
 	if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX)
-		memcpy(buf, tx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
+		memcpy(buf, rx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
 			       	ETH_GSTRING_LEN);
 }
 
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index dc6f097..37ecf84 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1440,6 +1440,10 @@
 	// Belkin F5D5055
 	USB_DEVICE(0x050d, 0x5055),
 	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Apple USB Ethernet Adapter
+	USB_DEVICE(0x05ac, 0x1402),
+	.driver_info = (unsigned long) &ax88772_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 3969b7a..ae467f1 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -194,7 +194,7 @@
 			dev_dbg(&info->control->dev,
 				"rndis response error, code %d\n", retval);
 		}
-		msleep(2);
+		msleep(20);
 	}
 	dev_dbg(&info->control->dev, "rndis response timeout\n");
 	return -ETIMEDOUT;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index f926b5a..5450eac 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -47,6 +47,9 @@
 	/* Number of input buffers, and max we've ever had. */
 	unsigned int num, max;
 
+	/* For cleaning up after transmission. */
+	struct tasklet_struct tasklet;
+
 	/* Receive & send queues. */
 	struct sk_buff_head recv;
 	struct sk_buff_head send;
@@ -68,8 +71,13 @@
 
 	/* Suppress further interrupts. */
 	svq->vq_ops->disable_cb(svq);
+
 	/* We were waiting for more output buffers. */
 	netif_wake_queue(vi->dev);
+
+	/* Make sure we re-xmit last_xmit_skb: if there are no more packets
+	 * queued, start_xmit won't be called. */
+	tasklet_schedule(&vi->tasklet);
 }
 
 static void receive_skb(struct net_device *dev, struct sk_buff *skb,
@@ -278,6 +286,18 @@
 	return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
 }
 
+static void xmit_tasklet(unsigned long data)
+{
+	struct virtnet_info *vi = (void *)data;
+
+	netif_tx_lock_bh(vi->dev);
+	if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) == 0) {
+		vi->svq->vq_ops->kick(vi->svq);
+		vi->last_xmit_skb = NULL;
+	}
+	netif_tx_unlock_bh(vi->dev);
+}
+
 static int start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct virtnet_info *vi = netdev_priv(dev);
@@ -287,21 +307,25 @@
 	free_old_xmit_skbs(vi);
 
 	/* If we has a buffer left over from last time, send it now. */
-	if (vi->last_xmit_skb) {
+	if (unlikely(vi->last_xmit_skb)) {
 		if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
 			/* Drop this skb: we only queue one. */
 			vi->dev->stats.tx_dropped++;
 			kfree_skb(skb);
+			skb = NULL;
 			goto stop_queue;
 		}
 		vi->last_xmit_skb = NULL;
 	}
 
 	/* Put new one in send queue and do transmit */
-	__skb_queue_head(&vi->send, skb);
-	if (xmit_skb(vi, skb) != 0) {
-		vi->last_xmit_skb = skb;
-		goto stop_queue;
+	if (likely(skb)) {
+		__skb_queue_head(&vi->send, skb);
+		if (xmit_skb(vi, skb) != 0) {
+			vi->last_xmit_skb = skb;
+			skb = NULL;
+			goto stop_queue;
+		}
 	}
 done:
 	vi->svq->vq_ops->kick(vi->svq);
@@ -428,6 +452,8 @@
 	skb_queue_head_init(&vi->recv);
 	skb_queue_head_init(&vi->send);
 
+	tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
+
 	err = register_netdev(dev);
 	if (err) {
 		pr_debug("virtio_net: registering device failed\n");
@@ -470,8 +496,7 @@
 		kfree_skb(skb);
 		vi->num--;
 	}
-	while ((skb = __skb_dequeue(&vi->send)) != NULL)
-		kfree_skb(skb);
+	__skb_queue_purge(&vi->send);
 
 	BUG_ON(vi->num != 0);
 
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 9a83c9d..7f98489 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -43,8 +43,7 @@
 
 #undef DEBUG_LINK
 
-static struct hdlc_proto *first_proto = NULL;
-
+static struct hdlc_proto *first_proto;
 
 static int hdlc_change_mtu(struct net_device *dev, int new_mtu)
 {
@@ -314,21 +313,25 @@
 
 void register_hdlc_protocol(struct hdlc_proto *proto)
 {
+	rtnl_lock();
 	proto->next = first_proto;
 	first_proto = proto;
+	rtnl_unlock();
 }
 
 
 void unregister_hdlc_protocol(struct hdlc_proto *proto)
 {
-	struct hdlc_proto **p = &first_proto;
-	while (*p) {
-		if (*p == proto) {
-			*p = proto->next;
-			return;
-		}
+	struct hdlc_proto **p;
+
+	rtnl_lock();
+	p = &first_proto;
+	while (*p != proto) {
+		BUG_ON(!*p);
 		p = &((*p)->next);
 	}
+	*p = proto->next;
+	rtnl_unlock();
 }
 
 
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 7133c68..762d21c 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -56,6 +56,7 @@
 	cisco_proto settings;
 
 	struct timer_list timer;
+	spinlock_t lock;
 	unsigned long last_poll;
 	int up;
 	int request_sent;
@@ -158,6 +159,7 @@
 {
 	struct net_device *dev = skb->dev;
 	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct cisco_state *st = state(hdlc);
 	struct hdlc_header *data = (struct hdlc_header*)skb->data;
 	struct cisco_packet *cisco_data;
 	struct in_device *in_dev;
@@ -220,11 +222,12 @@
 			goto rx_error;
 
 		case CISCO_KEEPALIVE_REQ:
-			state(hdlc)->rxseq = ntohl(cisco_data->par1);
-			if (state(hdlc)->request_sent &&
-			    ntohl(cisco_data->par2) == state(hdlc)->txseq) {
-				state(hdlc)->last_poll = jiffies;
-				if (!state(hdlc)->up) {
+			spin_lock(&st->lock);
+			st->rxseq = ntohl(cisco_data->par1);
+			if (st->request_sent &&
+			    ntohl(cisco_data->par2) == st->txseq) {
+				st->last_poll = jiffies;
+				if (!st->up) {
 					u32 sec, min, hrs, days;
 					sec = ntohl(cisco_data->time) / 1000;
 					min = sec / 60; sec -= min * 60;
@@ -232,12 +235,12 @@
 					days = hrs / 24; hrs -= days * 24;
 					printk(KERN_INFO "%s: Link up (peer "
 					       "uptime %ud%uh%um%us)\n",
-					       dev->name, days, hrs,
-					       min, sec);
+					       dev->name, days, hrs, min, sec);
 					netif_dormant_off(dev);
-					state(hdlc)->up = 1;
+					st->up = 1;
 				}
 			}
+			spin_unlock(&st->lock);
 
 			dev_kfree_skb_any(skb);
 			return NET_RX_SUCCESS;
@@ -261,24 +264,25 @@
 {
 	struct net_device *dev = (struct net_device *)arg;
 	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct cisco_state *st = state(hdlc);
 
-	if (state(hdlc)->up &&
-	    time_after(jiffies, state(hdlc)->last_poll +
-		       state(hdlc)->settings.timeout * HZ)) {
-		state(hdlc)->up = 0;
+	spin_lock(&st->lock);
+	if (st->up &&
+	    time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) {
+		st->up = 0;
 		printk(KERN_INFO "%s: Link down\n", dev->name);
 		netif_dormant_on(dev);
 	}
 
-	cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
-			     htonl(++state(hdlc)->txseq),
-			     htonl(state(hdlc)->rxseq));
-	state(hdlc)->request_sent = 1;
-	state(hdlc)->timer.expires = jiffies +
-		state(hdlc)->settings.interval * HZ;
-	state(hdlc)->timer.function = cisco_timer;
-	state(hdlc)->timer.data = arg;
-	add_timer(&state(hdlc)->timer);
+	cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq),
+			     htonl(st->rxseq));
+	st->request_sent = 1;
+	spin_unlock(&st->lock);
+
+	st->timer.expires = jiffies + st->settings.interval * HZ;
+	st->timer.function = cisco_timer;
+	st->timer.data = arg;
+	add_timer(&st->timer);
 }
 
 
@@ -286,15 +290,20 @@
 static void cisco_start(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
-	state(hdlc)->up = 0;
-	state(hdlc)->request_sent = 0;
-	state(hdlc)->txseq = state(hdlc)->rxseq = 0;
+	struct cisco_state *st = state(hdlc);
+	unsigned long flags;
 
-	init_timer(&state(hdlc)->timer);
-	state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/
-	state(hdlc)->timer.function = cisco_timer;
-	state(hdlc)->timer.data = (unsigned long)dev;
-	add_timer(&state(hdlc)->timer);
+	spin_lock_irqsave(&st->lock, flags);
+	st->up = 0;
+	st->request_sent = 0;
+	st->txseq = st->rxseq = 0;
+	spin_unlock_irqrestore(&st->lock, flags);
+
+	init_timer(&st->timer);
+	st->timer.expires = jiffies + HZ; /* First poll after 1 s */
+	st->timer.function = cisco_timer;
+	st->timer.data = (unsigned long)dev;
+	add_timer(&st->timer);
 }
 
 
@@ -302,10 +311,16 @@
 static void cisco_stop(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
-	del_timer_sync(&state(hdlc)->timer);
+	struct cisco_state *st = state(hdlc);
+	unsigned long flags;
+
+	del_timer_sync(&st->timer);
+
+	spin_lock_irqsave(&st->lock, flags);
 	netif_dormant_on(dev);
-	state(hdlc)->up = 0;
-	state(hdlc)->request_sent = 0;
+	st->up = 0;
+	st->request_sent = 0;
+	spin_unlock_irqrestore(&st->lock, flags);
 }
 
 
@@ -367,6 +382,7 @@
 			return result;
 
 		memcpy(&state(hdlc)->settings, &new_settings, size);
+		spin_lock_init(&state(hdlc)->lock);
 		dev->hard_start_xmit = hdlc->xmit;
 		dev->header_ops = &cisco_header_ops;
 		dev->type = ARPHRD_CISCO;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4e1c690..32019fb 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2905,7 +2905,7 @@
 
 static int waitbusy (struct airo_info *ai) {
 	int delay = 0;
-	while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
+	while ((IN4500(ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
 		udelay (10);
 		if ((++delay % 20) == 0)
 			OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 4e5c8fc..635b9ac 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1787,6 +1787,8 @@
 
 	spin_lock(&sc->rxbuflock);
 	do {
+		rxs.flag = 0;
+
 		if (unlikely(list_empty(&sc->rxbuf))) {
 			ATH5K_WARN(sc, "empty rx buf pool\n");
 			break;
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 5fb1ae6..77990b5 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -4119,6 +4119,7 @@
 	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
 		AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
 	rs->rs_status = 0;
+	rs->rs_phyerr = 0;
 
 	/*
 	 * Key table status
@@ -4145,7 +4146,7 @@
 		if (rx_status->rx_status_1 &
 				AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
 			rs->rs_status |= AR5K_RXERR_PHY;
-			rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1,
+			rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
 					   AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
 		}
 
@@ -4193,6 +4194,7 @@
 	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
 		AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
 	rs->rs_status = 0;
+	rs->rs_phyerr = 0;
 
 	/*
 	 * Key table status
@@ -4215,7 +4217,7 @@
 		if (rx_status->rx_status_1 &
 				AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
 			rs->rs_status |= AR5K_RXERR_PHY;
-			rs->rs_phyerr = AR5K_REG_MS(rx_err->rx_error_1,
+			rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
 					   AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
 		}
 
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 37783cd..dfa4bdd 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -737,6 +737,7 @@
 	struct ieee80211_tx_control beacon_txctl;
 	bool beacon0_uploaded;
 	bool beacon1_uploaded;
+	bool beacon_templates_virgin; /* Never wrote the templates? */
 	struct work_struct beacon_update_trigger;
 
 	/* The current QOS parameters for the 4 queues.
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 8fdba94..6c3d9ea 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1544,6 +1544,30 @@
 	kfree(probe_resp_data);
 }
 
+static void b43_upload_beacon0(struct b43_wldev *dev)
+{
+	struct b43_wl *wl = dev->wl;
+
+	if (wl->beacon0_uploaded)
+		return;
+	b43_write_beacon_template(dev, 0x68, 0x18);
+	/* FIXME: Probe resp upload doesn't really belong here,
+	 *        but we don't use that feature anyway. */
+	b43_write_probe_resp_template(dev, 0x268, 0x4A,
+				      &__b43_ratetable[3]);
+	wl->beacon0_uploaded = 1;
+}
+
+static void b43_upload_beacon1(struct b43_wldev *dev)
+{
+	struct b43_wl *wl = dev->wl;
+
+	if (wl->beacon1_uploaded)
+		return;
+	b43_write_beacon_template(dev, 0x468, 0x1A);
+	wl->beacon1_uploaded = 1;
+}
+
 static void handle_irq_beacon(struct b43_wldev *dev)
 {
 	struct b43_wl *wl = dev->wl;
@@ -1568,24 +1592,27 @@
 		return;
 	}
 
-	if (!beacon0_valid) {
-		if (!wl->beacon0_uploaded) {
-			b43_write_beacon_template(dev, 0x68, 0x18);
-			b43_write_probe_resp_template(dev, 0x268, 0x4A,
-						      &__b43_ratetable[3]);
-			wl->beacon0_uploaded = 1;
-		}
+	if (unlikely(wl->beacon_templates_virgin)) {
+		/* We never uploaded a beacon before.
+		 * Upload both templates now, but only mark one valid. */
+		wl->beacon_templates_virgin = 0;
+		b43_upload_beacon0(dev);
+		b43_upload_beacon1(dev);
 		cmd = b43_read32(dev, B43_MMIO_MACCMD);
 		cmd |= B43_MACCMD_BEACON0_VALID;
 		b43_write32(dev, B43_MMIO_MACCMD, cmd);
-	} else if (!beacon1_valid) {
-		if (!wl->beacon1_uploaded) {
-			b43_write_beacon_template(dev, 0x468, 0x1A);
-			wl->beacon1_uploaded = 1;
+	} else {
+		if (!beacon0_valid) {
+			b43_upload_beacon0(dev);
+			cmd = b43_read32(dev, B43_MMIO_MACCMD);
+			cmd |= B43_MACCMD_BEACON0_VALID;
+			b43_write32(dev, B43_MMIO_MACCMD, cmd);
+		} else if (!beacon1_valid) {
+			b43_upload_beacon1(dev);
+			cmd = b43_read32(dev, B43_MMIO_MACCMD);
+			cmd |= B43_MACCMD_BEACON1_VALID;
+			b43_write32(dev, B43_MMIO_MACCMD, cmd);
 		}
-		cmd = b43_read32(dev, B43_MMIO_MACCMD);
-		cmd |= B43_MACCMD_BEACON1_VALID;
-		b43_write32(dev, B43_MMIO_MACCMD, cmd);
 	}
 }
 
@@ -4073,6 +4100,9 @@
 	wl->filter_flags = 0;
 	wl->radiotap_enabled = 0;
 	b43_qos_clear(wl);
+	wl->beacon0_uploaded = 0;
+	wl->beacon1_uploaded = 0;
+	wl->beacon_templates_virgin = 1;
 
 	/* First register RFkill.
 	 * LEDs that are registered later depend on it. */
@@ -4241,7 +4271,9 @@
 			goto out;
 		}
 	}
-      out:
+out:
+	if (err)
+		wl->current_dev = NULL; /* Failed to init the dev. */
 	mutex_unlock(&wl->mutex);
 	if (err)
 		b43err(wl, "Controller restart FAILED\n");
@@ -4382,9 +4414,11 @@
 	struct b43_wldev *wldev;
 	struct b43_wl *wl;
 
+	/* Do not cancel ieee80211-workqueue based work here.
+	 * See comment in b43_remove(). */
+
 	wldev = ssb_get_drvdata(dev);
 	wl = wldev->wl;
-	cancel_work_sync(&wldev->restart_work);
 	b43_debugfs_remove_device(wldev);
 	b43_wireless_core_detach(wldev);
 	list_del(&wldev->list);
@@ -4569,6 +4603,10 @@
 	struct b43_wl *wl = ssb_get_devtypedata(dev);
 	struct b43_wldev *wldev = ssb_get_drvdata(dev);
 
+	/* We must cancel any work here before unregistering from ieee80211,
+	 * as the ieee80211 unreg will destroy the workqueue. */
+	cancel_work_sync(&wldev->restart_work);
+
 	B43_WARN_ON(!wl);
 	if (wl->current_dev == wldev)
 		ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 14a5eea..204077c 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3039,7 +3039,6 @@
 /* Locking: wl->mutex */
 static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
 {
-	struct b43legacy_wl *wl = dev->wl;
 	struct b43legacy_phy *phy = &dev->phy;
 	u32 macctl;
 
@@ -3054,12 +3053,6 @@
 	macctl |= B43legacy_MACCTL_PSM_JMP0;
 	b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
 
-	mutex_unlock(&wl->mutex);
-	/* Must unlock as it would otherwise deadlock. No races here.
-	 * Cancel possibly pending workqueues. */
-	cancel_work_sync(&dev->restart_work);
-	mutex_lock(&wl->mutex);
-
 	b43legacy_leds_exit(dev);
 	b43legacy_rng_exit(dev->wl);
 	b43legacy_pio_free(dev);
@@ -3486,6 +3479,8 @@
 		}
 	}
 out:
+	if (err)
+		wl->current_dev = NULL; /* Failed to init the dev. */
 	mutex_unlock(&wl->mutex);
 	if (err)
 		b43legacyerr(wl, "Controller restart FAILED\n");
@@ -3618,9 +3613,11 @@
 	struct b43legacy_wldev *wldev;
 	struct b43legacy_wl *wl;
 
+	/* Do not cancel ieee80211-workqueue based work here.
+	 * See comment in b43legacy_remove(). */
+
 	wldev = ssb_get_drvdata(dev);
 	wl = wldev->wl;
-	cancel_work_sync(&wldev->restart_work);
 	b43legacy_debugfs_remove_device(wldev);
 	b43legacy_wireless_core_detach(wldev);
 	list_del(&wldev->list);
@@ -3789,6 +3786,10 @@
 	struct b43legacy_wl *wl = ssb_get_devtypedata(dev);
 	struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
 
+	/* We must cancel any work here before unregistering from ieee80211,
+	 * as the ieee80211 unreg will destroy the workqueue. */
+	cancel_work_sync(&wldev->restart_work);
+
 	B43legacy_WARN_ON(!wl);
 	if (wl->current_dev == wldev)
 		ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 437a9bc..ed4317a1 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -833,6 +833,7 @@
 	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
 	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
 /*	PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000),    conflict with pcnet_cs */
+	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index d74c061..7293367 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -7558,8 +7558,31 @@
 	    priv->ieee->iw_mode == IW_MODE_ADHOC &&
 	    priv->config & CFG_ADHOC_CREATE &&
 	    priv->config & CFG_STATIC_ESSID &&
-	    priv->config & CFG_STATIC_CHANNEL &&
-	    !list_empty(&priv->ieee->network_free_list)) {
+	    priv->config & CFG_STATIC_CHANNEL) {
+		/* Use oldest network if the free list is empty */
+		if (list_empty(&priv->ieee->network_free_list)) {
+			struct ieee80211_network *oldest = NULL;
+			struct ieee80211_network *target;
+			DECLARE_MAC_BUF(mac);
+
+			list_for_each_entry(target, &priv->ieee->network_list, list) {
+				if ((oldest == NULL) ||
+				    (target->last_scanned < oldest->last_scanned))
+					oldest = target;
+			}
+
+			/* If there are no more slots, expire the oldest */
+			list_del(&oldest->list);
+			target = oldest;
+			IPW_DEBUG_ASSOC("Expired '%s' (%s) from "
+					"network list.\n",
+					escape_essid(target->ssid,
+						     target->ssid_len),
+					print_mac(mac, target->bssid));
+			list_add_tail(&target->list,
+				      &priv->ieee->network_free_list);
+		}
+
 		element = priv->ieee->network_free_list.next;
 		network = list_entry(element, struct ieee80211_network, list);
 		ipw_adhoc_create(priv, network);
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
index c9847b1..3a7f0cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
@@ -1162,7 +1162,6 @@
 
 			/* Higher rate not available, use the original */
 			} else {
-				new_rate = rate;
 				break;
 			}
 		}
@@ -2009,7 +2008,7 @@
 	 * 2)  Not just finishing up a search
 	 * 3)  Allowing a new search
 	 */
-	if (!update_lq && !done_search && !lq_sta->stay_in_tbl) {
+	if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
 		/* Save current throughput to compare with "search" throughput*/
 		lq_sta->last_tpt = current_tpt;
 
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index ad2fabc..0aa0ce3 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -312,8 +312,8 @@
 	if (tlv_type != TLV_TYPE_BCNMISS)
 		tlv->freq = freq;
 
-	/* The command header, the event mask, and the one TLV */
-	events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 2 + sizeof(*tlv));
+	/* The command header, the action, the event mask, and one TLV */
+	events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 4 + sizeof(*tlv));
 
 	ret = lbs_cmd_with_response(priv, CMD_802_11_SUBSCRIBE_EVENT, events);
 
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index dcfdb40..688d60d 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -73,8 +73,8 @@
         return ret;
 }
 
-static void lbs_ethtool_get_stats(struct net_device * dev,
-				struct ethtool_stats * stats, u64 * data)
+static void lbs_ethtool_get_stats(struct net_device *dev,
+				  struct ethtool_stats *stats, uint64_t *data)
 {
 	struct lbs_private *priv = dev->priv;
 	struct cmd_ds_mesh_access mesh_access;
@@ -83,12 +83,12 @@
 	lbs_deb_enter(LBS_DEB_ETHTOOL);
 
 	/* Get Mesh Statistics */
-	ret = lbs_prepare_and_send_command(priv,
-			CMD_MESH_ACCESS, CMD_ACT_MESH_GET_STATS,
-			CMD_OPTION_WAITFORRSP, 0, &mesh_access);
+	ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access);
 
-	if (ret)
+	if (ret) {
+		memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t)));
 		return;
+	}
 
 	priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
 	priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
@@ -111,19 +111,18 @@
 	lbs_deb_enter(LBS_DEB_ETHTOOL);
 }
 
-static int lbs_ethtool_get_sset_count(struct net_device * dev, int sset)
+static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
 {
-	switch (sset) {
-	case ETH_SS_STATS:
+	struct lbs_private *priv = dev->priv;
+
+	if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
 		return MESH_STATS_NUM;
-	default:
-		return -EOPNOTSUPP;
-	}
+
+	return -EOPNOTSUPP;
 }
 
 static void lbs_ethtool_get_strings(struct net_device *dev,
-					  u32 stringset,
-					  u8 * s)
+				    uint32_t stringset, uint8_t *s)
 {
 	int i;
 
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 8b7f576..1c216e0 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -461,6 +461,7 @@
 	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
 	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
 	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
 	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 98ddbb3..1610a730 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -49,6 +49,7 @@
 	{USB_DEVICE(0x5041, 0x2235)},	/* Linksys WUSB54G Portable */
 
 	/* Version 2 devices (3887) */
+	{USB_DEVICE(0x0471, 0x1230)},   /* Philips CPWUA054/00 */
 	{USB_DEVICE(0x050d, 0x7050)},	/* Belkin F5D7050 ver 1000 */
 	{USB_DEVICE(0x0572, 0x2000)},	/* Cohiba Proto board */
 	{USB_DEVICE(0x0572, 0x2002)},	/* Cohiba Proto board */
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index d0b1fb1..18c9931 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -116,6 +116,7 @@
 #define OID_802_11_ENCRYPTION_STATUS		ccpu2(0x0d01011b)
 #define OID_802_11_ADD_KEY			ccpu2(0x0d01011d)
 #define OID_802_11_REMOVE_KEY			ccpu2(0x0d01011e)
+#define OID_802_11_ASSOCIATION_INFORMATION	ccpu2(0x0d01011f)
 #define OID_802_11_PMKID			ccpu2(0x0d010123)
 #define OID_802_11_NETWORK_TYPES_SUPPORTED	ccpu2(0x0d010203)
 #define OID_802_11_NETWORK_TYPE_IN_USE		ccpu2(0x0d010204)
@@ -271,6 +272,26 @@
 	__le32 value_length;
 } __attribute__((packed));
 
+struct ndis_80211_assoc_info {
+	__le32 length;
+	__le16 req_ies;
+	struct req_ie {
+		__le16 capa;
+		__le16 listen_interval;
+		u8 cur_ap_address[6];
+	} req_ie;
+	__le32 req_ie_length;
+	__le32 offset_req_ies;
+	__le16 resp_ies;
+	struct resp_ie {
+		__le16 capa;
+		__le16 status_code;
+		__le16 assoc_id;
+	} resp_ie;
+	__le32 resp_ie_length;
+	__le32 offset_resp_ies;
+} __attribute__((packed));
+
 /* these have to match what is in wpa_supplicant */
 enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
 enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
@@ -674,6 +695,12 @@
 	return ret;
 }
 
+static int get_association_info(struct usbnet *usbdev,
+			struct ndis_80211_assoc_info *info, int len)
+{
+	return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION,
+				info, &len);
+}
 
 static int is_associated(struct usbnet *usbdev)
 {
@@ -2182,11 +2209,40 @@
 	struct usbnet *usbdev = priv->usbdev;
 	union iwreq_data evt;
 	unsigned char bssid[ETH_ALEN];
-	int ret;
+	struct ndis_80211_assoc_info *info;
+	int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32;
+	int ret, offset;
 
 	if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) {
-		ret = get_bssid(usbdev, bssid);
+		info = kzalloc(assoc_size, GFP_KERNEL);
+		if (!info)
+			goto get_bssid;
 
+		/* Get association info IEs from device and send them back to
+		 * userspace. */
+		ret = get_association_info(usbdev, info, assoc_size);
+		if (!ret) {
+			evt.data.length = le32_to_cpu(info->req_ie_length);
+			if (evt.data.length > 0) {
+				offset = le32_to_cpu(info->offset_req_ies);
+				wireless_send_event(usbdev->net,
+					IWEVASSOCREQIE, &evt,
+					(char *)info + offset);
+			}
+
+			evt.data.length = le32_to_cpu(info->resp_ie_length);
+			if (evt.data.length > 0) {
+				offset = le32_to_cpu(info->offset_resp_ies);
+				wireless_send_event(usbdev->net,
+					IWEVASSOCRESPIE, &evt,
+					(char *)info + offset);
+			}
+		}
+
+		kfree(info);
+
+get_bssid:
+		ret = get_bssid(usbdev, bssid);
 		if (!ret) {
 			evt.data.flags = 0;
 			evt.data.length = 0;
@@ -2414,6 +2470,11 @@
 	else if (priv->param_power_save > 2)
 		priv->param_power_save = 2;
 
+	if (priv->param_power_output < 0)
+		priv->param_power_output = 0;
+	else if (priv->param_power_output > 3)
+		priv->param_power_output = 3;
+
 	if (priv->param_roamtrigger < -80)
 		priv->param_roamtrigger = -80;
 	else if (priv->param_roamtrigger > -60)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 57bdc15..611d983 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -328,6 +328,11 @@
 	return DEFAULT_RSSI;
 }
 
+static inline void rt2x00_reset_link_ant_rssi(struct link *link)
+{
+	link->ant.rssi_ant = 0;
+}
+
 static inline int rt2x00_get_link_ant_rssi_history(struct link *link,
 						   enum antenna ant)
 {
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index a9930a0..48608e8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -129,6 +129,7 @@
 	 */
 	rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA);
 	rt2x00lib_reset_link_tuner(rt2x00dev);
+	rt2x00_reset_link_ant_rssi(&rt2x00dev->link);
 
 	rt2x00dev->link.ant.active.rx = libconf.ant.rx;
 	rt2x00dev->link.ant.active.tx = libconf.ant.tx;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b22c027..2673d56 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -483,9 +483,9 @@
 	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
-	ieee80211_iterate_active_interfaces(rt2x00dev->hw,
-					    rt2x00lib_beacondone_iter,
-					    rt2x00dev);
+	ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
+						   rt2x00lib_beacondone_iter,
+						   rt2x00dev);
 
 	queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
 }
@@ -507,7 +507,7 @@
 	 * Update TX statistics.
 	 */
 	rt2x00dev->link.qual.tx_success += success;
-	rt2x00dev->link.qual.tx_failed += txdesc->retry + fail;
+	rt2x00dev->link.qual.tx_failed += fail;
 
 	/*
 	 * Initialize TX status
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c206b50..87e280a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -93,6 +93,7 @@
 	 */
 	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
 		ieee80211_stop_queues(hw);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c
index 5d47935..947ee55 100644
--- a/drivers/net/wireless/rtl8180_grf5101.c
+++ b/drivers/net/wireless/rtl8180_grf5101.c
@@ -88,7 +88,7 @@
 	write_grf5101(dev, 0x0B, chan);
 	write_grf5101(dev, 0x07, 0x1000);
 
-	grf5101_write_phy_antenna(dev, chan);
+	grf5101_write_phy_antenna(dev, channel);
 }
 
 static void grf5101_rf_stop(struct ieee80211_hw *dev)
diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c
index a34dfd3..6c825fd 100644
--- a/drivers/net/wireless/rtl8180_max2820.c
+++ b/drivers/net/wireless/rtl8180_max2820.c
@@ -78,7 +78,8 @@
 				   struct ieee80211_conf *conf)
 {
 	struct rtl8180_priv *priv = dev->priv;
-	int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+	int channel = conf ?
+		ieee80211_frequency_to_channel(conf->channel->center_freq) : 1;
 	unsigned int chan_idx = channel - 1;
 	u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
 	u32 chan = max2820_chan[chan_idx];
@@ -87,7 +88,7 @@
 	 * sa2400, for MAXIM we do this directly from BB */
 	rtl8180_write_phy(dev, 3, txpw);
 
-	max2820_write_phy_antenna(dev, chan);
+	max2820_write_phy_antenna(dev, channel);
 	write_max2820(dev, 3, chan);
 }
 
diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c
index 0311b4e..cea4e0c 100644
--- a/drivers/net/wireless/rtl8180_sa2400.c
+++ b/drivers/net/wireless/rtl8180_sa2400.c
@@ -86,7 +86,7 @@
 
 	write_sa2400(dev, 7, txpw);
 
-	sa2400_write_phy_antenna(dev, chan);
+	sa2400_write_phy_antenna(dev, channel);
 
 	write_sa2400(dev, 0, chan);
 	write_sa2400(dev, 1, 0xbb50);
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d5787b3..9223ada 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -92,6 +92,7 @@
 		u8 data[4];
 		struct usb_ctrlrequest dr;
 	} *buf;
+	int rc;
 
 	buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
 	if (!buf)
@@ -116,7 +117,11 @@
 	usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			     (unsigned char *)dr, buf, len,
 			     rtl8187_iowrite_async_cb, buf);
-	usb_submit_urb(urb, GFP_ATOMIC);
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+	if (rc < 0) {
+		kfree(buf);
+		usb_free_urb(urb);
+	}
 }
 
 static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
@@ -169,6 +174,7 @@
 	struct urb *urb;
 	__le16 rts_dur = 0;
 	u32 flags;
+	int rc;
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
@@ -208,7 +214,11 @@
 	info->dev = dev;
 	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
 			  hdr, skb->len, rtl8187_tx_cb, skb);
-	usb_submit_urb(urb, GFP_ATOMIC);
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+	if (rc < 0) {
+		usb_free_urb(urb);
+		kfree_skb(skb);
+	}
 
 	return 0;
 }
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 8bddff1..d26f69b 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -946,8 +946,7 @@
 		work_done++;
 	}
 
-	while ((skb = __skb_dequeue(&errq)))
-		kfree_skb(skb);
+	__skb_queue_purge(&errq);
 
 	work_done -= handle_incoming_queue(dev, &rxq);
 
@@ -1079,8 +1078,7 @@
 		}
 	}
 
-	while ((skb = __skb_dequeue(&free_list)) != NULL)
-		dev_kfree_skb(skb);
+	__skb_queue_purge(&free_list);
 
 	spin_unlock_bh(&np->rx_lock);
 }
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 715a444..b2ccdcb 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -21,7 +21,6 @@
 };
 
 static struct i2c_driver_device i2c_devices[] = {
-	{ "dallas,ds1374", "rtc-ds1374" },
 };
 
 static int of_find_i2c_driver(struct device_node *node,
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 925ba16..a11021e 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -619,6 +619,7 @@
 int pci_hp_register (struct hotplug_slot *slot)
 {
 	int result;
+	struct hotplug_slot *tmp;
 
 	if (slot == NULL)
 		return -ENODEV;
@@ -630,7 +631,11 @@
 		return -EINVAL;
 	}
 
-	/* this can fail if we have already registered a slot with the same name */
+	/* Check if we have already registered a slot with the same name. */
+	tmp = get_slot_from_name(slot->name);
+	if (tmp)
+		return -EEXIST;
+
 	slot->kobj.kset = pci_hotplug_slots_kset;
 	result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
 				      "%s", slot->name);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 8264a76..79c9dda 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -97,6 +97,7 @@
 	u8 cap_base;
 	struct timer_list poll_timer;
 	volatile int cmd_busy;
+	unsigned int no_cmd_complete:1;
 };
 
 #define INT_BUTTON_IGNORE		0
@@ -135,6 +136,7 @@
 #define PWR_LED_PRSN	0x00000010
 #define HP_SUPR_RM_SUP	0x00000020
 #define EMI_PRSN	0x00020000
+#define NO_CMD_CMPL_SUP	0x00040000
 
 #define ATTN_BUTTN(ctrl)	((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
 #define POWER_CTRL(ctrl)	((ctrl)->slot_cap & PWR_CTRL_PRSN)
@@ -143,13 +145,14 @@
 #define PWR_LED(ctrl)		((ctrl)->slot_cap & PWR_LED_PRSN)
 #define HP_SUPR_RM(ctrl)	((ctrl)->slot_cap & HP_SUPR_RM_SUP)
 #define EMI(ctrl)		((ctrl)->slot_cap & EMI_PRSN)
+#define NO_CMD_CMPL(ctrl)	((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
 
 extern int pciehp_sysfs_enable_slot(struct slot *slot);
 extern int pciehp_sysfs_disable_slot(struct slot *slot);
-extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_attention_button(struct slot *p_slot);
+  extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_presence_change(struct slot *p_slot);
+extern u8 pciehp_handle_power_fault(struct slot *p_slot);
 extern int pciehp_configure_device(struct slot *p_slot);
 extern int pciehp_unconfigure_device(struct slot *p_slot);
 extern void pciehp_queue_pushbutton_work(struct work_struct *work);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 43d8ddb..48a2ed3 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -254,7 +254,11 @@
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
 		retval = pci_hp_register(hotplug_slot);
 		if (retval) {
-			err ("pci_hp_register failed with error %d\n", retval);
+			err("pci_hp_register failed with error %d\n", retval);
+			if (retval == -EEXIST)
+				err("Failed to register slot because of name "
+				    "collision. Try \'pciehp_slot_with_bus\' "
+				    "module option.\n");
 			goto error_info;
 		}
 		/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 0a7aa62..96a5d55 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -55,16 +55,13 @@
 	return 0;
 }
 
-u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_attention_button(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u32 event_type;
 
 	/* Attention Button Change */
 	dbg("pciehp:  Attention button interrupt received.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
 	/*
 	 *  Button pressed - See if need to TAKE ACTION!!!
 	 */
@@ -76,18 +73,15 @@
 	return 0;
 }
 
-u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_switch_change(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u8 getstatus;
 	u32 event_type;
 
 	/* Switch Change */
 	dbg("pciehp:  Switch interrupt received.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-
 	if (getstatus) {
 		/*
 		 * Switch opened
@@ -107,17 +101,14 @@
 	return 1;
 }
 
-u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_presence_change(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u32 event_type;
 	u8 presence_save;
 
 	/* Presence Change */
 	dbg("pciehp:  Presence/Notify input change.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
 	/* Switch is open, assume a presence change
 	 * Save the presence state
 	 */
@@ -141,16 +132,13 @@
 	return 1;
 }
 
-u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_power_fault(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u32 event_type;
 
 	/* power fault */
 	dbg("pciehp:  Power fault interrupt received.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
 	if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
 		/*
 		 * power fault Cleared
@@ -163,7 +151,7 @@
 		 */
 		info("Power fault on Slot(%s)\n", p_slot->name);
 		event_type = INT_POWER_FAULT;
-		info("power fault bit %x set\n", hp_slot);
+		info("power fault bit %x set\n", 0);
 	}
 
 	queue_interrupt_event(p_slot, event_type);
@@ -186,6 +174,13 @@
 		}
 	}
 
+	/*
+	 * After turning power off, we must wait for at least 1 second
+	 * before taking any action that relies on power having been
+	 * removed from the slot/adapter.
+	 */
+	msleep(1000);
+
 	if (PWR_LED(ctrl))
 		pslot->hpc_ops->green_led_off(pslot);
 
@@ -289,6 +284,13 @@
 		}
 	}
 
+	/*
+	 * After turning power off, we must wait for at least 1 second
+	 * before taking any action that relies on power having been
+	 * removed from the slot/adapter.
+	 */
+	msleep(1000);
+
 	if (PWR_LED(ctrl))
 		/* turn off Green LED */
 		p_slot->hpc_ops->green_led_off(p_slot);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 891f81a..79f1049 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -247,14 +247,38 @@
 		free_irq(ctrl->pci_dev->irq, ctrl);
 }
 
-static inline int pcie_wait_cmd(struct controller *ctrl)
+static inline int pcie_poll_cmd(struct controller *ctrl)
+{
+	u16 slot_status;
+	int timeout = 1000;
+
+	if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+		if (slot_status & CMD_COMPLETED)
+			goto completed;
+	for (timeout = 1000; timeout > 0; timeout -= 100) {
+		msleep(100);
+		if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+			if (slot_status & CMD_COMPLETED)
+				goto completed;
+	}
+	return 0;	/* timeout */
+
+completed:
+	pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+	return timeout;
+}
+
+static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
 {
 	int retval = 0;
 	unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
 	unsigned long timeout = msecs_to_jiffies(msecs);
 	int rc;
 
-	rc = wait_event_interruptible_timeout(ctrl->queue,
+	if (poll)
+		rc = pcie_poll_cmd(ctrl);
+	else
+		rc = wait_event_interruptible_timeout(ctrl->queue,
 					      !ctrl->cmd_busy, timeout);
 	if (!rc)
 		dbg("Command not completed in 1000 msec\n");
@@ -286,12 +310,28 @@
 		goto out;
 	}
 
-	if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
-		/* After 1 sec and CMD_COMPLETED still not set, just
-		   proceed forward to issue the next command according
-		   to spec.  Just print out the error message */
-		dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
-		    __func__);
+	if (slot_status & CMD_COMPLETED) {
+		if (!ctrl->no_cmd_complete) {
+			/*
+			 * After 1 sec and CMD_COMPLETED still not set, just
+			 * proceed forward to issue the next command according
+			 * to spec. Just print out the error message.
+			 */
+			dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
+			    __func__);
+		} else if (!NO_CMD_CMPL(ctrl)) {
+			/*
+			 * This controller semms to notify of command completed
+			 * event even though it supports none of power
+			 * controller, attention led, power led and EMI.
+			 */
+			dbg("%s: Unexpected CMD_COMPLETED. Need to wait for "
+			    "command completed event.\n", __func__);
+			ctrl->no_cmd_complete = 0;
+		} else {
+			dbg("%s: Unexpected CMD_COMPLETED. Maybe the "
+			    "controller is broken.\n", __func__);
+		}
 	}
 
 	retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
@@ -315,8 +355,18 @@
 	/*
 	 * Wait for command completion.
 	 */
-	if (!retval)
-		retval = pcie_wait_cmd(ctrl);
+	if (!retval && !ctrl->no_cmd_complete) {
+		int poll = 0;
+		/*
+		 * if hotplug interrupt is not enabled or command
+		 * completed interrupt is not enabled, we need to poll
+		 * command completed event.
+		 */
+		if (!(slot_ctrl & HP_INTR_ENABLE) ||
+		    !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
+			poll = 1;
+                retval = pcie_wait_cmd(ctrl, poll);
+	}
  out:
 	mutex_unlock(&ctrl->ctrl_lock);
 	return retval;
@@ -704,13 +754,6 @@
 	}
 	dbg("%s: SLOTCTRL %x write cmd %x\n",
 	    __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
-
-	/*
-	 * After turning power off, we must wait for at least 1 second
-	 * before taking any action that relies on power having been
-	 * removed from the slot/adapter.
-	 */
-	msleep(1000);
  out:
 	if (changed)
 		pcie_unmask_bad_dllp(ctrl);
@@ -722,6 +765,7 @@
 {
 	struct controller *ctrl = (struct controller *)dev_id;
 	u16 detected, intr_loc;
+	struct slot *p_slot;
 
 	/*
 	 * In order to guarantee that all interrupt events are
@@ -756,21 +800,38 @@
 		wake_up_interruptible(&ctrl->queue);
 	}
 
+	if (!(intr_loc & ~CMD_COMPLETED))
+		return IRQ_HANDLED;
+
+	/*
+	 * Return without handling events if this handler routine is
+	 * called before controller initialization is done. This may
+	 * happen if hotplug event or another interrupt that shares
+	 * the IRQ with pciehp arrives before slot initialization is
+	 * done after interrupt handler is registered.
+	 *
+	 * FIXME - Need more structural fixes. We need to be ready to
+	 * handle the event before installing interrupt handler.
+	 */
+	p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+	if (!p_slot || !p_slot->hpc_ops)
+		return IRQ_HANDLED;
+
 	/* Check MRL Sensor Changed */
 	if (intr_loc & MRL_SENS_CHANGED)
-		pciehp_handle_switch_change(0, ctrl);
+		pciehp_handle_switch_change(p_slot);
 
 	/* Check Attention Button Pressed */
 	if (intr_loc & ATTN_BUTTN_PRESSED)
-		pciehp_handle_attention_button(0, ctrl);
+		pciehp_handle_attention_button(p_slot);
 
 	/* Check Presence Detect Changed */
 	if (intr_loc & PRSN_DETECT_CHANGED)
-		pciehp_handle_presence_change(0, ctrl);
+		pciehp_handle_presence_change(p_slot);
 
 	/* Check Power Fault Detected */
 	if (intr_loc & PWR_FAULT_DETECTED)
-		pciehp_handle_power_fault(0, ctrl);
+		pciehp_handle_power_fault(p_slot);
 
 	return IRQ_HANDLED;
 }
@@ -1028,6 +1089,12 @@
 static int pcie_init_hardware_part1(struct controller *ctrl,
 				    struct pcie_device *dev)
 {
+	/* Clear all remaining event bits in Slot Status register */
+	if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
+		err("%s: Cannot write to SLOTSTATUS register\n", __func__);
+		return -1;
+	}
+
 	/* Mask Hot-plug Interrupt Enable */
 	if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
 		err("%s: Cannot mask hotplug interrupt enable\n", __func__);
@@ -1040,16 +1107,6 @@
 {
 	u16 cmd, mask;
 
-	/*
-	 * We need to clear all events before enabling hotplug interrupt
-	 * notification mechanism in order for hotplug controler to
-	 * generate interrupts.
-	 */
-	if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
-		err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
-		return -1;
-	}
-
 	cmd = PRSN_DETECT_ENABLE;
 	if (ATTN_BUTTN(ctrl))
 		cmd |= ATTN_BUTTN_ENABLE;
@@ -1116,6 +1173,7 @@
 	dbg("  Power Indicator      : %3s\n", PWR_LED(ctrl)    ? "yes" : "no");
 	dbg("  Hot-Plug Surprise    : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
 	dbg("  EMI Present          : %3s\n", EMI(ctrl)        ? "yes" : "no");
+	dbg("  Comamnd Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
 	pciehp_readw(ctrl, SLOTSTATUS, &reg16);
 	dbg("Slot Status            : 0x%04x\n", reg16);
 	pciehp_readw(ctrl, SLOTSTATUS, &reg16);
@@ -1147,6 +1205,15 @@
 	mutex_init(&ctrl->ctrl_lock);
 	init_waitqueue_head(&ctrl->queue);
 	dbg_ctrl(ctrl);
+	/*
+	 * Controller doesn't notify of command completion if the "No
+	 * Command Completed Support" bit is set in Slot Capability
+	 * register or the controller supports none of power
+	 * controller, attention led, power led and EMI.
+	 */
+	if (NO_CMD_CMPL(ctrl) ||
+	    !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
+	    ctrl->no_cmd_complete = 1;
 
 	info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
 	     pdev->vendor, pdev->device,
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index e32148a..779c5db 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -18,8 +18,12 @@
 #include "rpadlpar.h"
 
 #define DLPAR_KOBJ_NAME       "control"
-#define ADD_SLOT_ATTR_NAME    "add_slot"
-#define REMOVE_SLOT_ATTR_NAME "remove_slot"
+
+/* Those two have no quotes because they are passed to __ATTR() which
+ * stringifies the argument (yuck !)
+ */
+#define ADD_SLOT_ATTR_NAME    add_slot
+#define REMOVE_SLOT_ATTR_NAME remove_slot
 
 #define MAX_DRC_NAME_LEN 64
 
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 1648076..9784865 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -162,6 +162,10 @@
 		retval = pci_hp_register(slot->hotplug_slot);
 		if (retval) {
 			err("pci_hp_register failed with error %d\n", retval);
+			if (retval == -EEXIST)
+				err("Failed to register slot because of name "
+                                    "collision. Try \'shpchp_slot_with_bus\' "
+				    "module option.\n");
 			goto error_info;
 		}
 
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 61fedb24..f824955 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -506,6 +506,23 @@
 	pdev->link_state = NULL;
 }
 
+static int pcie_aspm_sanity_check(struct pci_dev *pdev)
+{
+	struct pci_dev *child_dev;
+	int child_pos;
+
+	/*
+	 * Some functions in a slot might not all be PCIE functions, very
+	 * strange. Disable ASPM for the whole slot
+	 */
+	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+		child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+		if (!child_pos)
+			return -EINVAL;
+	}
+	return 0;
+}
+
 /*
  * pcie_aspm_init_link_state: Initiate PCI express link state.
  * It is called after the pcie and its children devices are scaned.
@@ -526,6 +543,9 @@
 	if (list_empty(&pdev->subordinate->devices))
 		goto out;
 
+	if (pcie_aspm_sanity_check(pdev))
+		goto out;
+
 	mutex_lock(&aspm_lock);
 
 	link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 0a6cea1..52d0aa8 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -352,6 +352,7 @@
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, electra_cf_match);
 
 static struct of_platform_driver electra_cf_driver = {
 	.name	   = (char *)driver_name,
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index e2b7de4..1ff3bb5 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -286,7 +286,7 @@
 					pci_name(pdev), i,
 					(unsigned long long) pci_start,
 					(unsigned long long) pci_end);
-				res->flags = 0;
+				res->flags |= IORESOURCE_DISABLED;
 			}
 		}
 	}
diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c
index 9c2496d..cf4e07b 100644
--- a/drivers/pnp/system.c
+++ b/drivers/pnp/system.c
@@ -81,7 +81,7 @@
 	}
 
 	for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
-		if (res->flags & IORESOURCE_UNSET)
+		if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED))
 			continue;
 
 		reserve_range(dev, res->start, res->end, 0);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index c444d6b..49215da 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -201,7 +201,7 @@
 
 	dev_dbg(dev, "uevent\n");
 
-	if (!psy) {
+	if (!psy || !psy->dev) {
 		dev_dbg(dev, "No power supply yet\n");
 		return ret;
 	}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6cc2c03..60f8afc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -534,4 +534,12 @@
 	help
 	  If you say yes here you get support for the Ricoh RS5C313 RTC chips.
 
+config RTC_DRV_PPC
+       tristate "PowerPC machine dependent RTC support"
+       depends on PPC_MERGE
+       help
+	 The PowerPC kernel has machine-specific functions for accessing
+	 the RTC. This exposes that functionality through the generic RTC
+	 class.
+
 endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 872f1218f..ebe871c 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -54,3 +54,4 @@
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_PPC)	+= rtc-ppc.o
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index fa2d2f8..640acd2 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -42,7 +42,7 @@
 #define DS1374_REG_TCR		0x09 /* Trickle Charge */
 
 static const struct i2c_device_id ds1374_id[] = {
-	{ "rtc-ds1374", 0 },
+	{ "ds1374", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ds1374_id);
diff --git a/drivers/rtc/rtc-ppc.c b/drivers/rtc/rtc-ppc.c
new file mode 100644
index 0000000..c8e97e2
--- /dev/null
+++ b/drivers/rtc/rtc-ppc.c
@@ -0,0 +1,69 @@
+/*
+ * RTC driver for ppc_md RTC functions
+ *
+ * © 2007 Red Hat, Inc.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+
+static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	ppc_md.get_rtc_time(tm);
+	return 0;
+}
+
+static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return ppc_md.set_rtc_time(tm);
+}
+
+static const struct rtc_class_ops ppc_rtc_ops = {
+	.set_time = ppc_rtc_set_time,
+	.read_time = ppc_rtc_read_time,
+};
+
+static struct rtc_device *rtc;
+static struct platform_device *ppc_rtc_pdev;
+
+static int __init ppc_rtc_init(void)
+{
+	if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time)
+		return -ENODEV;
+
+	ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0);
+	if (IS_ERR(ppc_rtc_pdev))
+		return PTR_ERR(ppc_rtc_pdev);
+
+	rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev,
+				  &ppc_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		platform_device_unregister(ppc_rtc_pdev);
+		return PTR_ERR(rtc);
+	}
+
+	return 0;
+}
+
+static void __exit ppc_rtc_exit(void)
+{
+	rtc_device_unregister(rtc);
+	platform_device_unregister(ppc_rtc_pdev);
+}
+
+module_init(ppc_rtc_init);
+module_exit(ppc_rtc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Generic RTC class driver for PowerPC");
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 8ba3f13..1a40256 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -63,6 +63,7 @@
  */
 static wait_queue_head_t dasd_init_waitq;
 static wait_queue_head_t dasd_flush_wq;
+static wait_queue_head_t generic_waitq;
 
 /*
  * Allocate memory for a new device structure.
@@ -1151,11 +1152,15 @@
 	struct list_head *l, *n;
 	struct dasd_ccw_req *cqr;
 	struct dasd_block *block;
+	void (*callback)(struct dasd_ccw_req *, void *data);
+	void *callback_data;
 
 	list_for_each_safe(l, n, final_queue) {
 		cqr = list_entry(l, struct dasd_ccw_req, devlist);
 		list_del_init(&cqr->devlist);
 		block = cqr->block;
+		callback = cqr->callback;
+		callback_data = cqr->callback_data;
 		if (block)
 			spin_lock_bh(&block->queue_lock);
 		switch (cqr->status) {
@@ -1176,7 +1181,7 @@
 			BUG();
 		}
 		if (cqr->callback != NULL)
-			(cqr->callback)(cqr, cqr->callback_data);
+			(callback)(cqr, callback_data);
 		if (block)
 			spin_unlock_bh(&block->queue_lock);
 	}
@@ -1406,17 +1411,15 @@
  */
 int dasd_sleep_on(struct dasd_ccw_req *cqr)
 {
-	wait_queue_head_t wait_q;
 	struct dasd_device *device;
 	int rc;
 
 	device = cqr->startdev;
 
-	init_waitqueue_head (&wait_q);
 	cqr->callback = dasd_wakeup_cb;
-	cqr->callback_data = (void *) &wait_q;
+	cqr->callback_data = (void *) &generic_waitq;
 	dasd_add_request_tail(cqr);
-	wait_event(wait_q, _wait_for_wakeup(cqr));
+	wait_event(generic_waitq, _wait_for_wakeup(cqr));
 
 	/* Request status is either done or failed. */
 	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
@@ -1429,20 +1432,18 @@
  */
 int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
 {
-	wait_queue_head_t wait_q;
 	struct dasd_device *device;
 	int rc;
 
 	device = cqr->startdev;
-	init_waitqueue_head (&wait_q);
 	cqr->callback = dasd_wakeup_cb;
-	cqr->callback_data = (void *) &wait_q;
+	cqr->callback_data = (void *) &generic_waitq;
 	dasd_add_request_tail(cqr);
-	rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr));
+	rc = wait_event_interruptible(generic_waitq, _wait_for_wakeup(cqr));
 	if (rc == -ERESTARTSYS) {
 		dasd_cancel_req(cqr);
 		/* wait (non-interruptible) for final status */
-		wait_event(wait_q, _wait_for_wakeup(cqr));
+		wait_event(generic_waitq, _wait_for_wakeup(cqr));
 	}
 	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
 	return rc;
@@ -1466,7 +1467,6 @@
 
 int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
 {
-	wait_queue_head_t wait_q;
 	struct dasd_device *device;
 	int rc;
 
@@ -1478,9 +1478,8 @@
 		return rc;
 	}
 
-	init_waitqueue_head (&wait_q);
 	cqr->callback = dasd_wakeup_cb;
-	cqr->callback_data = (void *) &wait_q;
+	cqr->callback_data = (void *) &generic_waitq;
 	cqr->status = DASD_CQR_QUEUED;
 	list_add(&cqr->devlist, &device->ccw_queue);
 
@@ -1489,7 +1488,7 @@
 
 	spin_unlock_irq(get_ccwdev_lock(device->cdev));
 
-	wait_event(wait_q, _wait_for_wakeup(cqr));
+	wait_event(generic_waitq, _wait_for_wakeup(cqr));
 
 	/* Request status is either done or failed. */
 	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
@@ -2430,6 +2429,7 @@
 
 	init_waitqueue_head(&dasd_init_waitq);
 	init_waitqueue_head(&dasd_flush_wq);
+	init_waitqueue_head(&generic_waitq);
 
 	/* register 'common' DASD debug area, used for all DBF_XXX calls */
 	dasd_debug_area = debug_register("dasd", 1, 1, 8 * sizeof(long));
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 0d98f1f..848ef7e 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -549,7 +549,6 @@
 		   struct raw3270_request *rq)
 {
 	unsigned long flags;
-	wait_queue_head_t wq;
 	int rc;
 
 #ifdef CONFIG_TN3270_CONSOLE
@@ -566,20 +565,20 @@
 		return rq->rc;
 	}
 #endif
-	init_waitqueue_head(&wq);
 	rq->callback = raw3270_wake_init;
-	rq->callback_data = &wq;
+	rq->callback_data = &raw3270_wait_queue;
 	spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
 	rc = __raw3270_start(rp, view, rq);
 	spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags);
 	if (rc)
 		return rc;
 	/* Now wait for the completion. */
-	rc = wait_event_interruptible(wq, raw3270_request_final(rq));
+	rc = wait_event_interruptible(raw3270_wait_queue,
+				      raw3270_request_final(rq));
 	if (rc == -ERESTARTSYS) {	/* Interrupted by a signal. */
 		raw3270_halt_io(view->dev, rq);
 		/* No wait for the halt to complete. */
-		wait_event(wq, raw3270_request_final(rq));
+		wait_event(raw3270_wait_queue, raw3270_request_final(rq));
 		return -ERESTARTSYS;
 	}
 	return rq->rc;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index 9e784d5..ad05a87 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -40,7 +40,7 @@
 	put_online_cpus();
 }
 
-static void sclp_cpu_change_notify(struct work_struct *work)
+static void __ref sclp_cpu_change_notify(struct work_struct *work)
 {
 	smp_rescan_cpus();
 }
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 35707c0..62576af 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -71,9 +71,6 @@
 /* Number of requests in outqueue */
 static int sclp_vt220_outqueue_count;
 
-/* Wait queue used to delay write requests while we've run out of buffers */
-static wait_queue_head_t sclp_vt220_waitq;
-
 /* Timer used for delaying write requests to merge subsequent messages into
  * a single buffer */
 static struct timer_list sclp_vt220_timer;
@@ -133,7 +130,6 @@
 	} while (request && __sclp_vt220_emit(request));
 	if (request == NULL && sclp_vt220_flush_later)
 		sclp_vt220_emit_current();
-	wake_up(&sclp_vt220_waitq);
 	/* Check if the tty needs a wake up call */
 	if (sclp_vt220_tty != NULL) {
 		tty_wakeup(sclp_vt220_tty);
@@ -383,7 +379,7 @@
  */
 static int
 __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
-		   int convertlf, int may_schedule)
+		   int convertlf, int may_fail)
 {
 	unsigned long flags;
 	void *page;
@@ -395,15 +391,14 @@
 	overall_written = 0;
 	spin_lock_irqsave(&sclp_vt220_lock, flags);
 	do {
-		/* Create a sclp output buffer if none exists yet */
+		/* Create an sclp output buffer if none exists yet */
 		if (sclp_vt220_current_request == NULL) {
 			while (list_empty(&sclp_vt220_empty)) {
 				spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-				if (in_interrupt() || !may_schedule)
-					sclp_sync_wait();
+				if (may_fail)
+					goto out;
 				else
-					wait_event(sclp_vt220_waitq,
-						!list_empty(&sclp_vt220_empty));
+					sclp_sync_wait();
 				spin_lock_irqsave(&sclp_vt220_lock, flags);
 			}
 			page = (void *) sclp_vt220_empty.next;
@@ -437,6 +432,7 @@
 		add_timer(&sclp_vt220_timer);
 	}
 	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+out:
 	return overall_written;
 }
 
@@ -520,19 +516,11 @@
  * character to the tty device.  If the kernel uses this routine,
  * it must call the flush_chars() routine (if defined) when it is
  * done stuffing characters into the driver.
- *
- * NOTE: include/linux/tty_driver.h specifies that a character should be
- * ignored if there is no room in the queue. This driver implements a different
- * semantic in that it will block when there is no more room left.
- *
- * FIXME: putchar can currently be called from BH and other non blocking
- * handlers so  this semantic isn't a good idea.
  */
 static int
 sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
 {
-	__sclp_vt220_write(&ch, 1, 0, 0, 1);
-	return 1;
+	return __sclp_vt220_write(&ch, 1, 0, 0, 1);
 }
 
 /*
@@ -653,7 +641,6 @@
 	spin_lock_init(&sclp_vt220_lock);
 	INIT_LIST_HEAD(&sclp_vt220_empty);
 	INIT_LIST_HEAD(&sclp_vt220_outqueue);
-	init_waitqueue_head(&sclp_vt220_waitq);
 	init_timer(&sclp_vt220_timer);
 	sclp_vt220_current_request = NULL;
 	sclp_vt220_buffered_chars = 0;
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index dddf8d6..d0d565a 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -231,6 +231,9 @@
 	/* Request queue. */
 	struct list_head		req_queue;
 
+	/* Request wait queue. */
+	wait_queue_head_t		wait_queue;
+
 	/* Each tape device has (currently) two minor numbers. */
 	int				first_minor;
 
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index ddc4a11..95da72b 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -179,11 +179,11 @@
 			tapeblock_end_request(req, -EIO);
 			continue;
 		}
+		blkdev_dequeue_request(req);
+		nr_queued++;
 		spin_unlock_irq(&device->blk_data.request_queue_lock);
 		rc = tapeblock_start_request(device, req);
 		spin_lock_irq(&device->blk_data.request_queue_lock);
-		blkdev_dequeue_request(req);
-		nr_queued++;
 	}
 	spin_unlock_irq(&device->blk_data.request_queue_lock);
 	atomic_set(&device->blk_data.requeue_scheduled, 0);
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 76e44eb..c20e3c5 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -449,6 +449,7 @@
 	INIT_LIST_HEAD(&device->req_queue);
 	INIT_LIST_HEAD(&device->node);
 	init_waitqueue_head(&device->state_change_wq);
+	init_waitqueue_head(&device->wait_queue);
 	device->tape_state = TS_INIT;
 	device->medium_state = MS_UNKNOWN;
 	*device->modeset_byte = 0;
@@ -954,21 +955,19 @@
 int
 tape_do_io(struct tape_device *device, struct tape_request *request)
 {
-	wait_queue_head_t wq;
 	int rc;
 
-	init_waitqueue_head(&wq);
 	spin_lock_irq(get_ccwdev_lock(device->cdev));
 	/* Setup callback */
 	request->callback = __tape_wake_up;
-	request->callback_data = &wq;
+	request->callback_data = &device->wait_queue;
 	/* Add request to request queue and try to start it. */
 	rc = __tape_start_request(device, request);
 	spin_unlock_irq(get_ccwdev_lock(device->cdev));
 	if (rc)
 		return rc;
 	/* Request added to the queue. Wait for its completion. */
-	wait_event(wq, (request->callback == NULL));
+	wait_event(device->wait_queue, (request->callback == NULL));
 	/* Get rc from request */
 	return request->rc;
 }
@@ -989,20 +988,19 @@
 tape_do_io_interruptible(struct tape_device *device,
 			 struct tape_request *request)
 {
-	wait_queue_head_t wq;
 	int rc;
 
-	init_waitqueue_head(&wq);
 	spin_lock_irq(get_ccwdev_lock(device->cdev));
 	/* Setup callback */
 	request->callback = __tape_wake_up_interruptible;
-	request->callback_data = &wq;
+	request->callback_data = &device->wait_queue;
 	rc = __tape_start_request(device, request);
 	spin_unlock_irq(get_ccwdev_lock(device->cdev));
 	if (rc)
 		return rc;
 	/* Request added to the queue. Wait for its completion. */
-	rc = wait_event_interruptible(wq, (request->callback == NULL));
+	rc = wait_event_interruptible(device->wait_queue,
+				      (request->callback == NULL));
 	if (rc != -ERESTARTSYS)
 		/* Request finished normally. */
 		return request->rc;
@@ -1015,7 +1013,7 @@
 		/* Wait for the interrupt that acknowledges the halt. */
 		do {
 			rc = wait_event_interruptible(
-				wq,
+				device->wait_queue,
 				(request->callback == NULL)
 			);
 		} while (rc == -ERESTARTSYS);
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 9f55ce6..5ab3434 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -31,11 +31,6 @@
  */
 static void *kvm_devices;
 
-/*
- * Unique numbering for kvm devices.
- */
-static unsigned int dev_index;
-
 struct kvm_device {
 	struct virtio_device vdev;
 	struct kvm_device_desc *desc;
@@ -250,26 +245,25 @@
  * adds a new device and register it with virtio
  * appropriate drivers are loaded by the device model
  */
-static void add_kvm_device(struct kvm_device_desc *d)
+static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset)
 {
 	struct kvm_device *kdev;
 
 	kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
 	if (!kdev) {
-		printk(KERN_EMERG "Cannot allocate kvm dev %u\n",
-		       dev_index++);
+		printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n",
+		       offset, d->type);
 		return;
 	}
 
 	kdev->vdev.dev.parent = &kvm_root;
-	kdev->vdev.index = dev_index++;
 	kdev->vdev.id.device = d->type;
 	kdev->vdev.config = &kvm_vq_configspace_ops;
 	kdev->desc = d;
 
 	if (register_virtio_device(&kdev->vdev) != 0) {
-		printk(KERN_ERR "Failed to register kvm device %u\n",
-		       kdev->vdev.index);
+		printk(KERN_ERR "Failed to register kvm device %u type %u\n",
+		       offset, d->type);
 		kfree(kdev);
 	}
 }
@@ -289,7 +283,7 @@
 		if (d->type == 0)
 			break;
 
-		add_kvm_device(d);
+		add_kvm_device(d, i);
 	}
 }
 
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b31faec..867f6fd 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1278,7 +1278,7 @@
 			error = 0;
 			/* Check for command packet errors */
 			if (full_command_packet->command.newcommand.status != 0) {
-				if (tw_dev->srb[request_id] != 0) {
+				if (tw_dev->srb[request_id] != NULL) {
 					error = twa_fill_sense(tw_dev, request_id, 1, 1);
 				} else {
 					/* Skip ioctl error prints */
@@ -1290,7 +1290,7 @@
 
 			/* Check for correct state */
 			if (tw_dev->state[request_id] != TW_S_POSTED) {
-				if (tw_dev->srb[request_id] != 0) {
+				if (tw_dev->srb[request_id] != NULL) {
 					TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted");
 					TW_CLEAR_ALL_INTERRUPTS(tw_dev);
 					goto twa_interrupt_bail;
@@ -1298,7 +1298,7 @@
 			}
 
 			/* Check for internal command completion */
-			if (tw_dev->srb[request_id] == 0) {
+			if (tw_dev->srb[request_id] == NULL) {
 				if (request_id != tw_dev->chrdev_request_id) {
 					if (twa_aen_complete(tw_dev, request_id))
 						TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt");
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 1dca177..0899cb6 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -3582,7 +3582,7 @@
 	if (i == ARRAY_SIZE(ports))
 		return 0;
 
-	if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) {
+	if (!request_region(setup->io_port, IO_RANGE, "aha152x")) {
 		printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
 		return 0;
 	}
@@ -3842,7 +3842,7 @@
 			if ((setup_count == 1) && (setup[0].io_port == ports[i]))
 				continue;
 
-			if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) {
+			if (!request_region(ports[i], IO_RANGE, "aha152x")) {
 				printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
 				continue;
 			}
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index db6de5e..7d31154 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -747,7 +747,7 @@
 		dev->quhd[c] = 0;
 	}
 	workreq = dev->quereq[c][dev->quhd[c]];
-	if (dev->id[c][scmd_id(workreq)].curr_req == 0) {	
+	if (dev->id[c][scmd_id(workreq)].curr_req == NULL) {
 		dev->id[c][scmd_id(workreq)].curr_req = workreq;
 		dev->last_cmd[c] = scmd_id(workreq);
 		goto cmd_subp;
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index aaa48e0..da876d3 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -444,7 +444,7 @@
 	if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) {
 		printk(KERN_ERR "scsi%d: pci resource invalid\n",
 				hba->host->host_no);
-		return 0;
+		return NULL;
 	}
 
 	mem_base_phy = pci_resource_start(pcidev, index);
@@ -454,7 +454,7 @@
 	if (!mem_base_virt) {
 		printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n",
 				hba->host->host_no);
-		return 0;
+		return NULL;
 	}
 	return mem_base_virt;
 }
@@ -476,11 +476,11 @@
 static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba)
 {
 	hba->u.mv.regs = hptiop_map_pci_bar(hba, 0);
-	if (hba->u.mv.regs == 0)
+	if (hba->u.mv.regs == NULL)
 		return -1;
 
 	hba->u.mv.mu = hptiop_map_pci_bar(hba, 2);
-	if (hba->u.mv.mu == 0) {
+	if (hba->u.mv.mu == NULL) {
 		iounmap(hba->u.mv.regs);
 		return -1;
 	}
@@ -1210,8 +1210,8 @@
 
 static struct hptiop_adapter_ops hptiop_itl_ops = {
 	.iop_wait_ready    = iop_wait_ready_itl,
-	.internal_memalloc = 0,
-	.internal_memfree  = 0,
+	.internal_memalloc = NULL,
+	.internal_memfree  = NULL,
 	.map_pci_bar       = hptiop_map_pci_bar_itl,
 	.unmap_pci_bar     = hptiop_unmap_pci_bar_itl,
 	.enable_intr       = hptiop_enable_intr_itl,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ccfd8ac..5d23368 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1348,7 +1348,7 @@
 
 	del_timer(&evt_struct->timer);
 
-	if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+	if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd)
 		evt_struct->cmnd->result = DID_ERROR << 16;
 	if (evt_struct->done)
 		evt_struct->done(evt_struct);
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 4c4aadb..2046045 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -65,7 +65,8 @@
 	VIOSRP_VIOLATES_MAX_XFER = 0x2,
 	VIOSRP_PARTNER_PANIC = 0x3,
 	VIOSRP_DEVICE_BUSY = 0x8,
-	VIOSRP_ADAPTER_FAIL = 0x10
+	VIOSRP_ADAPTER_FAIL = 0x10,
+	VIOSRP_OK2 = 0x99,
 };
 
 struct viosrp_crq {
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 51e2f29..3754ab8 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2811,7 +2811,7 @@
 
 	/* Check for room in outstanding command list. */
 	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
-		     ha->outstanding_cmds[cnt] != 0; cnt++);
+		     ha->outstanding_cmds[cnt] != NULL; cnt++);
 
 	if (cnt >= MAX_OUTSTANDING_COMMANDS) {
 		status = 1;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 2876908..8dd88fc 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -70,6 +70,9 @@
 	case 2:
 		qla2x00_alloc_fw_dump(ha);
 		break;
+	case 3:
+		qla2x00_system_error(ha);
+		break;
 	}
 	return (count);
 }
@@ -886,9 +889,13 @@
 static void
 qla2x00_get_host_port_type(struct Scsi_Host *shost)
 {
-	scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost));
+	scsi_qla_host_t *ha = shost_priv(shost);
 	uint32_t port_type = FC_PORTTYPE_UNKNOWN;
 
+	if (ha->parent) {
+		fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+		return;
+	}
 	switch (ha->current_topology) {
 	case ISP_CFG_NL:
 		port_type = FC_PORTTYPE_LPORT;
@@ -1172,10 +1179,10 @@
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
 
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	ha->cur_vport_count--;
 	clear_bit(vha->vp_idx, ha->vp_idx_map);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	kfree(vha->node_name);
 	kfree(vha->port_name);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 299eccf..8dd60001 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2457,7 +2457,7 @@
 #define MBX_INTR_WAIT	2
 #define MBX_UPDATE_FLASH_ACTIVE	3
 
-	struct semaphore vport_sem;	/* Virtual port synchronization */
+	struct mutex vport_lock;	/* Virtual port synchronization */
 	struct completion mbx_cmd_comp;	/* Serialize mbx access */
 	struct completion mbx_intr_comp;  /* Used for completion notification */
 
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f882706..9b4bebe 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -228,6 +228,9 @@
 extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
 
 extern int
+qla2x00_system_error(scsi_qla_host_t *);
+
+extern int
 qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
 
 extern int
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index e9bae27..92fafbd 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -34,7 +34,11 @@
 static inline void
 qla2x00_poll(scsi_qla_host_t *ha)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	ha->isp_ops->intr_handler(0, ha);
+	local_irq_restore(flags);
 }
 
 static __inline__ scsi_qla_host_t *
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 5d9a64a..ec63b79 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -272,8 +272,6 @@
 	uint32_t	rscn_entry, host_pid;
 	uint8_t		rscn_queue_index;
 	unsigned long	flags;
-	scsi_qla_host_t	*vha;
-	int		i;
 
 	/* Setup to process RIO completion. */
 	handle_cnt = 0;
@@ -544,18 +542,10 @@
 		break;
 
 	case MBA_PORT_UPDATE:		/* Port database update */
-		if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
-			for_each_mapped_vp_idx(ha, i) {
-				list_for_each_entry(vha, &ha->vp_list,
-				    vp_list) {
-					if ((mb[3] & 0xff)
-					    == vha->vp_idx) {
-						ha = vha;
-						break;
-					}
-				}
-			}
-		}
+		/* Only handle SCNs for our Vport index. */
+		if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+			break;
+
 		/*
 		 * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
 		 * event etc. earlier indicating loop is down) then process
@@ -590,18 +580,12 @@
 		break;
 
 	case MBA_RSCN_UPDATE:		/* State Change Registration */
-		if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
-			for_each_mapped_vp_idx(ha, i) {
-				list_for_each_entry(vha, &ha->vp_list,
-				    vp_list) {
-					if ((mb[3] & 0xff)
-					    == vha->vp_idx) {
-						ha = vha;
-						break;
-					}
-				}
-			}
-		}
+		/* Check if the Vport has issued a SCR */
+		if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags))
+			break;
+		/* Only handle SCNs for our Vport index. */
+		if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+			break;
 
 		DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
 		    ha->host_no));
@@ -1132,25 +1116,6 @@
 				break;
 
 			qla2x00_handle_sense(sp, sense_data, sense_len);
-
-			/*
-			 * In case of a Underrun condition, set both the lscsi
-			 * status and the completion status to appropriate
-			 * values.
-			 */
-			if (resid &&
-			    ((unsigned)(scsi_bufflen(cp) - resid) <
-			     cp->underflow)) {
-				DEBUG2(qla_printk(KERN_INFO, ha,
-				    "scsi(%ld:%d:%d:%d): Mid-layer underflow "
-				    "detected (%x of %x bytes)...returning "
-				    "error status.\n", ha->host_no,
-				    cp->device->channel, cp->device->id,
-				    cp->device->lun, resid,
-				    scsi_bufflen(cp)));
-
-				cp->result = DID_ERROR << 16 | lscsi_status;
-			}
 		} else {
 			/*
 			 * If RISC reports underrun and target does not report
@@ -1639,12 +1604,12 @@
 	ha = dev_id;
 	reg = &ha->iobase->isp24;
 
-	spin_lock(&ha->hardware_lock);
+	spin_lock_irq(&ha->hardware_lock);
 
 	qla24xx_process_response_queue(ha);
 	WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 
-	spin_unlock(&ha->hardware_lock);
+	spin_unlock_irq(&ha->hardware_lock);
 
 	return IRQ_HANDLED;
 }
@@ -1663,7 +1628,7 @@
 	reg = &ha->iobase->isp24;
 	status = 0;
 
-	spin_lock(&ha->hardware_lock);
+	spin_lock_irq(&ha->hardware_lock);
 	do {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1716,7 +1681,7 @@
 		}
 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 	} while (0);
-	spin_unlock(&ha->hardware_lock);
+	spin_unlock_irq(&ha->hardware_lock);
 
 	if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
 	    (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 2100604..250d2f6 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2303,8 +2303,6 @@
 	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
 }
 
-#if 0
-
 int
 qla2x00_system_error(scsi_qla_host_t *ha)
 {
@@ -2312,7 +2310,7 @@
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	if (!IS_FWI2_CAPABLE(ha))
+	if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha))
 		return QLA_FUNCTION_FAILED;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
@@ -2334,8 +2332,6 @@
 	return rval;
 }
 
-#endif  /*  0  */
-
 /**
  * qla2x00_set_serdes_params() -
  * @ha: HA context
@@ -2508,7 +2504,7 @@
 		if (mb)
 			memcpy(mb, mcp->mb, 8 * sizeof(*mb));
 		if (dwords)
-			*dwords = mcp->mb[6];
+			*dwords = buffers;
 	}
 
 	return rval;
@@ -2807,9 +2803,9 @@
 	 */
 	map = (vp_index - 1) / 8;
 	pos = (vp_index - 1) & 7;
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	vce->vp_idx_map[map] |= 1 << pos;
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0);
 	if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f2b0497..62a3ad6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -32,12 +32,12 @@
 	scsi_qla_host_t *ha = vha->parent;
 
 	/* Find an empty slot and assign an vp_id */
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
 	if (vp_id > ha->max_npiv_vports) {
 		DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
 		    vp_id, ha->max_npiv_vports));
-		up(&ha->vport_sem);
+		mutex_unlock(&ha->vport_lock);
 		return vp_id;
 	}
 
@@ -45,7 +45,7 @@
 	ha->num_vhosts++;
 	vha->vp_idx = vp_id;
 	list_add_tail(&vha->vp_list, &ha->vp_list);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 	return vp_id;
 }
 
@@ -55,12 +55,12 @@
 	uint16_t vp_id;
 	scsi_qla_host_t *ha = vha->parent;
 
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	vp_id = vha->vp_idx;
 	ha->num_vhosts--;
 	clear_bit(vp_id, ha->vp_idx_map);
 	list_del(&vha->vp_list);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 }
 
 static scsi_qla_host_t *
@@ -145,9 +145,9 @@
 	}
 
 	/* Initialize the new vport unless it is a persistent port */
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	ret = qla24xx_modify_vp_config(vha);
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	if (ret != QLA_SUCCESS) {
 		fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
@@ -406,6 +406,7 @@
 	INIT_LIST_HEAD(&vha->list);
 	INIT_LIST_HEAD(&vha->fcports);
 	INIT_LIST_HEAD(&vha->vp_fcports);
+	INIT_LIST_HEAD(&vha->work_list);
 
 	vha->dpc_flags = 0L;
 	set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
@@ -437,10 +438,10 @@
 	vha->flags.init_done = 1;
 	num_hosts++;
 
-	down(&ha->vport_sem);
+	mutex_lock(&ha->vport_lock);
 	set_bit(vha->vp_idx, ha->vp_idx_map);
 	ha->cur_vport_count++;
-	up(&ha->vport_sem);
+	mutex_unlock(&ha->vport_lock);
 
 	return vha;
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3223fd1..48eaa3b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -10,6 +10,7 @@
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
+#include <linux/mutex.h>
 
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsicam.h>
@@ -1631,7 +1632,7 @@
 	/* load the F/W, read paramaters, and init the H/W */
 	ha->instance = num_hosts;
 
-	init_MUTEX(&ha->vport_sem);
+	mutex_init(&ha->vport_lock);
 	init_completion(&ha->mbx_cmd_comp);
 	complete(&ha->mbx_cmd_comp);
 	init_completion(&ha->mbx_intr_comp);
@@ -2156,13 +2157,14 @@
 qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
 {
 	unsigned long flags;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	if (!locked)
-		spin_lock_irqsave(&ha->hardware_lock, flags);
+		spin_lock_irqsave(&pha->hardware_lock, flags);
 	list_add_tail(&e->list, &ha->work_list);
 	qla2xxx_wake_dpc(ha);
 	if (!locked)
-		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+		spin_unlock_irqrestore(&pha->hardware_lock, flags);
 	return QLA_SUCCESS;
 }
 
@@ -2202,12 +2204,13 @@
 qla2x00_do_work(struct scsi_qla_host *ha)
 {
 	struct qla_work_evt *e;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
-	spin_lock_irq(&ha->hardware_lock);
+	spin_lock_irq(&pha->hardware_lock);
 	while (!list_empty(&ha->work_list)) {
 		e = list_entry(ha->work_list.next, struct qla_work_evt, list);
 		list_del_init(&e->list);
-		spin_unlock_irq(&ha->hardware_lock);
+		spin_unlock_irq(&pha->hardware_lock);
 
 		switch (e->type) {
 		case QLA_EVT_AEN:
@@ -2221,9 +2224,9 @@
 		}
 		if (e->flags & QLA_EVT_FLAG_FREE)
 			kfree(e);
-		spin_lock_irq(&ha->hardware_lock);
+		spin_lock_irq(&pha->hardware_lock);
 	}
-	spin_unlock_irq(&ha->hardware_lock);
+	spin_unlock_irq(&pha->hardware_lock);
 }
 
 /**************************************************************************
@@ -2634,7 +2637,7 @@
 #define FW_FILE_ISP24XX	"ql2400_fw.bin"
 #define FW_FILE_ISP25XX	"ql2500_fw.bin"
 
-static DECLARE_MUTEX(qla_fw_lock);
+static DEFINE_MUTEX(qla_fw_lock);
 
 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
 	{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
@@ -2665,7 +2668,7 @@
 		blob = &qla_fw_blobs[FW_ISP25XX];
 	}
 
-	down(&qla_fw_lock);
+	mutex_lock(&qla_fw_lock);
 	if (blob->fw)
 		goto out;
 
@@ -2678,7 +2681,7 @@
 	}
 
 out:
-	up(&qla_fw_lock);
+	mutex_unlock(&qla_fw_lock);
 	return blob;
 }
 
@@ -2687,11 +2690,11 @@
 {
 	int idx;
 
-	down(&qla_fw_lock);
+	mutex_lock(&qla_fw_lock);
 	for (idx = 0; idx < FW_BLOBS; idx++)
 		if (qla_fw_blobs[idx].fw)
 			release_firmware(qla_fw_blobs[idx].fw);
-	up(&qla_fw_lock);
+	mutex_unlock(&qla_fw_lock);
 }
 
 static pci_ers_result_t
@@ -2864,7 +2867,8 @@
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
+	printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+	    qla2x00_version_str);
 	ret = pci_register_driver(&qla2xxx_pci_driver);
 	if (ret) {
 		kmem_cache_destroy(srb_cachep);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index afeae2b..d058c88 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k2"
+#define QLA2XXX_VERSION      "8.02.01-k4"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	2
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 049103f..93d2b67 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -359,7 +359,12 @@
 
 static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
-	struct scsi_device *sdev = to_scsi_device(dev);
+	struct scsi_device *sdev;
+
+	if (dev->type != &scsi_dev_type)
+		return 0;
+
+	sdev = to_scsi_device(dev);
 
 	add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
 	return 0;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1400ea6..1bc00b7 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -43,7 +43,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/serial.h>
 
 #include "8250.h"
 
@@ -93,6 +92,7 @@
  */
 #define CONFIG_HUB6 1
 
+#include <asm/serial.h>
 /*
  * SERIAL_PORT_DFNS tells us about built-in ports that have no
  * standard enumeration mechanism.   Platforms that can find all
@@ -1547,8 +1547,6 @@
 		i->head = &up->list;
 		spin_unlock_irq(&i->lock);
 
-		irq_flags |= SERIAL_EXTRA_IRQ_FLAGS;
-
 		ret = request_irq(up->port.irq, serial8250_interrupt,
 				  irq_flags, "serial", i);
 		if (ret < 0)
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index a10a40c..91bd28f 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -78,8 +78,3 @@
 #else
 #define ALPHA_KLUDGE_MCR 0
 #endif
-
-#ifndef SERIAL_EXTRA_IRQ_FLAGS
-#define SERIAL_EXTRA_IRQ_FLAGS 0
-#endif
-
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53fa19c..788c3559 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2602,7 +2602,12 @@
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,	/* 135a.0811 */
 		pbn_b2_2_115200 },
-
+	/*
+	 * IntaShield IS-400
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
+		pbn_b2_4_115200 },
 	/*
 	 * Perle PCI-RAS cards
 	 */
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index c065a70..42be8b01 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1318,7 +1318,7 @@
 	 * If the baud rate generator isn't running, the port wasn't
 	 * initialized by the boot loader.
 	 */
-	quot = UART_GET_BRGR(port);
+	quot = UART_GET_BRGR(port) & ATMEL_US_CD;
 	if (!quot)
 		return;
 
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead..f20952c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -530,11 +530,7 @@
 	if (uart->cts_pin < 0)
 		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 
-# ifdef BF54x
-	if (UART_GET_MSR(uart) & CTS)
-# else
-	if (gpio_get_value(uart->cts_pin))
-# endif
+	if (UART_GET_CTS(uart))
 		return TIOCM_DSR | TIOCM_CAR;
 	else
 #endif
@@ -549,17 +545,9 @@
 		return;
 
 	if (mctrl & TIOCM_RTS)
-# ifdef BF54x
-		UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
-		gpio_set_value(uart->rts_pin, 0);
-# endif
+		UART_CLEAR_RTS(uart);
 	else
-# ifdef BF54x
-		UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
-		gpio_set_value(uart->rts_pin, 1);
-# endif
+		UART_SET_RTS(uart);
 #endif
 }
 
@@ -752,11 +740,7 @@
 
 	/* Disable UART */
 	ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
-	UART_CLEAR_IER(uart, 0xF);
-#else
-	UART_PUT_IER(uart, 0);
-#endif
+	UART_DISABLE_INTS(uart);
 
 	/* Set DLAB in LCR to Access DLL and DLH */
 	UART_SET_DLAB(uart);
@@ -771,11 +755,7 @@
 	UART_PUT_LCR(uart, lcr);
 
 	/* Enable UART */
-#ifdef CONFIG_BF54x
-	UART_SET_IER(uart, ier);
-#else
-	UART_PUT_IER(uart, ier);
-#endif
+	UART_ENABLE_INTS(uart, ier);
 
 	val = UART_GET_GCTL(uart);
 	val |= UCEN;
@@ -833,15 +813,15 @@
  * Enable the IrDA function if tty->ldisc.num is N_IRDA.
  * In other cases, disable IrDA function.
  */
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
 {
-	int line = tty->index;
+	int line = port->line;
 	unsigned short val;
 
-	if (line >= tty->driver->num)
+	if (line >= port->info->tty->driver->num)
 		return;
 
-	switch (tty->ldisc.num) {
+	switch (port->info->tty->ldisc.num) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
@@ -866,6 +846,7 @@
 	.startup	= bfin_serial_startup,
 	.shutdown	= bfin_serial_shutdown,
 	.set_termios	= bfin_serial_set_termios,
+	.set_ldisc	= bfin_serial_set_ldisc,
 	.type		= bfin_serial_type,
 	.release_port	= bfin_serial_release_port,
 	.request_port	= bfin_serial_request_port,
@@ -1206,7 +1187,6 @@
 
 	ret = uart_register_driver(&bfin_serial_reg);
 	if (ret == 0) {
-		bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
 		ret = platform_driver_register(&bfin_serial_driver);
 		if (ret) {
 			pr_debug("uart register failed\n");
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 2d6c08b..f8e1447 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -924,7 +924,7 @@
 
 static struct uart_driver sbd_reg = {
 	.owner		= THIS_MODULE,
-	.driver_name	= "serial",
+	.driver_name	= "sb1250_duart",
 	.dev_name	= "duart",
 	.major		= TTY_MAJOR,
 	.minor		= SB1250_DUART_MINOR_BASE,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index eab0327..c9b64e7 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@
 	return ret;
 }
 
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port = state->port;
+
+	if (port->ops->set_ldisc)
+		port->ops->set_ldisc(port);
+}
+
 static void uart_set_termios(struct tty_struct *tty,
 						struct ktermios *old_termios)
 {
@@ -2054,6 +2063,8 @@
 int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 {
 	struct uart_state *state = drv->state + port->line;
+	struct device *tty_dev;
+	struct uart_match match = {port, drv};
 
 	mutex_lock(&state->mutex);
 
@@ -2063,7 +2074,8 @@
 		return 0;
 	}
 
-	if (!port->suspended) {
+	tty_dev = device_find_child(port->dev, &match, serial_match_port);
+	if (!port->suspended && device_may_wakeup(tty_dev)) {
 		disable_irq_wake(port->irq);
 		mutex_unlock(&state->mutex);
 		return 0;
@@ -2285,6 +2297,7 @@
 	.unthrottle	= uart_unthrottle,
 	.send_xchar	= uart_send_xchar,
 	.set_termios	= uart_set_termios,
+	.set_ldisc	= uart_set_ldisc,
 	.stop		= uart_stop,
 	.start		= uart_start,
 	.hangup		= uart_hangup,
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 145c028..2847336 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -499,7 +499,6 @@
 	} else
 		spin_lock(&port->lock);
 
-	spin_lock_irqsave(&port->lock, flags);
 	for (i = 0; i < n; i++) {
 		if (*s == '\n')
 			sunhv_console_putchar(port, '\r');
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 01917c4..566a8b4 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -195,7 +195,7 @@
 
 static struct uart_driver ucc_uart_driver = {
 	.owner  	= THIS_MODULE,
-	.driver_name    = "serial",
+	.driver_name    = "ucc_uart",
 	.dev_name       = "ttyQE",
 	.major  	= SERIAL_QE_MAJOR,
 	.minor  	= SERIAL_QE_MINOR,
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index b3518ca..799337f 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -25,6 +25,7 @@
 #include <linux/ioctl.h>
 #include <linux/fs.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
@@ -67,10 +68,12 @@
 				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
 
 struct spidev_data {
-	struct device		dev;
+	dev_t			devt;
+	spinlock_t		spi_lock;
 	struct spi_device	*spi;
 	struct list_head	device_entry;
 
+	/* buffer is NULL unless this device is open (users > 0) */
 	struct mutex		buf_lock;
 	unsigned		users;
 	u8			*buffer;
@@ -85,12 +88,75 @@
 
 /*-------------------------------------------------------------------------*/
 
+/*
+ * We can't use the standard synchronous wrappers for file I/O; we
+ * need to protect against async removal of the underlying spi_device.
+ */
+static void spidev_complete(void *arg)
+{
+	complete(arg);
+}
+
+static ssize_t
+spidev_sync(struct spidev_data *spidev, struct spi_message *message)
+{
+	DECLARE_COMPLETION_ONSTACK(done);
+	int status;
+
+	message->complete = spidev_complete;
+	message->context = &done;
+
+	spin_lock_irq(&spidev->spi_lock);
+	if (spidev->spi == NULL)
+		status = -ESHUTDOWN;
+	else
+		status = spi_async(spidev->spi, message);
+	spin_unlock_irq(&spidev->spi_lock);
+
+	if (status == 0) {
+		wait_for_completion(&done);
+		status = message->status;
+		if (status == 0)
+			status = message->actual_length;
+	}
+	return status;
+}
+
+static inline ssize_t
+spidev_sync_write(struct spidev_data *spidev, size_t len)
+{
+	struct spi_transfer	t = {
+			.tx_buf		= spidev->buffer,
+			.len		= len,
+		};
+	struct spi_message	m;
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+	return spidev_sync(spidev, &m);
+}
+
+static inline ssize_t
+spidev_sync_read(struct spidev_data *spidev, size_t len)
+{
+	struct spi_transfer	t = {
+			.rx_buf		= spidev->buffer,
+			.len		= len,
+		};
+	struct spi_message	m;
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+	return spidev_sync(spidev, &m);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /* Read-only message with current device setup */
 static ssize_t
 spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
 {
 	struct spidev_data	*spidev;
-	struct spi_device	*spi;
 	ssize_t			status = 0;
 
 	/* chipselect only toggles at start or end of operation */
@@ -98,10 +164,9 @@
 		return -EMSGSIZE;
 
 	spidev = filp->private_data;
-	spi = spidev->spi;
 
 	mutex_lock(&spidev->buf_lock);
-	status = spi_read(spi, spidev->buffer, count);
+	status = spidev_sync_read(spidev, count);
 	if (status == 0) {
 		unsigned long	missing;
 
@@ -122,7 +187,6 @@
 		size_t count, loff_t *f_pos)
 {
 	struct spidev_data	*spidev;
-	struct spi_device	*spi;
 	ssize_t			status = 0;
 	unsigned long		missing;
 
@@ -131,12 +195,11 @@
 		return -EMSGSIZE;
 
 	spidev = filp->private_data;
-	spi = spidev->spi;
 
 	mutex_lock(&spidev->buf_lock);
 	missing = copy_from_user(spidev->buffer, buf, count);
 	if (missing == 0) {
-		status = spi_write(spi, spidev->buffer, count);
+		status = spidev_sync_write(spidev, count);
 		if (status == 0)
 			status = count;
 	} else
@@ -153,7 +216,6 @@
 	struct spi_transfer	*k_xfers;
 	struct spi_transfer	*k_tmp;
 	struct spi_ioc_transfer *u_tmp;
-	struct spi_device	*spi = spidev->spi;
 	unsigned		n, total;
 	u8			*buf;
 	int			status = -EFAULT;
@@ -215,7 +277,7 @@
 		spi_message_add_tail(k_tmp, &msg);
 	}
 
-	status = spi_sync(spi, &msg);
+	status = spidev_sync(spidev, &msg);
 	if (status < 0)
 		goto done;
 
@@ -269,8 +331,16 @@
 	if (err)
 		return -EFAULT;
 
+	/* guard against device removal before, or while,
+	 * we issue this ioctl.
+	 */
 	spidev = filp->private_data;
-	spi = spidev->spi;
+	spin_lock_irq(&spidev->spi_lock);
+	spi = spi_dev_get(spidev->spi);
+	spin_unlock_irq(&spidev->spi_lock);
+
+	if (spi == NULL)
+		return -ESHUTDOWN;
 
 	switch (cmd) {
 	/* read requests */
@@ -356,8 +426,10 @@
 	default:
 		/* segmented and/or full-duplex I/O request */
 		if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0))
-				|| _IOC_DIR(cmd) != _IOC_WRITE)
-			return -ENOTTY;
+				|| _IOC_DIR(cmd) != _IOC_WRITE) {
+			retval = -ENOTTY;
+			break;
+		}
 
 		tmp = _IOC_SIZE(cmd);
 		if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) {
@@ -385,6 +457,7 @@
 		kfree(ioc);
 		break;
 	}
+	spi_dev_put(spi);
 	return retval;
 }
 
@@ -396,7 +469,7 @@
 	mutex_lock(&device_list_lock);
 
 	list_for_each_entry(spidev, &device_list, device_entry) {
-		if (spidev->dev.devt == inode->i_rdev) {
+		if (spidev->devt == inode->i_rdev) {
 			status = 0;
 			break;
 		}
@@ -429,10 +502,22 @@
 	mutex_lock(&device_list_lock);
 	spidev = filp->private_data;
 	filp->private_data = NULL;
+
+	/* last close? */
 	spidev->users--;
 	if (!spidev->users) {
+		int		dofree;
+
 		kfree(spidev->buffer);
 		spidev->buffer = NULL;
+
+		/* ... after we unbound from the underlying device? */
+		spin_lock_irq(&spidev->spi_lock);
+		dofree = (spidev->spi == NULL);
+		spin_unlock_irq(&spidev->spi_lock);
+
+		if (dofree)
+			kfree(spidev);
 	}
 	mutex_unlock(&device_list_lock);
 
@@ -459,19 +544,7 @@
  * It also simplifies memory management.
  */
 
-static void spidev_classdev_release(struct device *dev)
-{
-	struct spidev_data	*spidev;
-
-	spidev = container_of(dev, struct spidev_data, dev);
-	kfree(spidev);
-}
-
-static struct class spidev_class = {
-	.name		= "spidev",
-	.owner		= THIS_MODULE,
-	.dev_release	= spidev_classdev_release,
-};
+static struct class *spidev_class;
 
 /*-------------------------------------------------------------------------*/
 
@@ -488,6 +561,7 @@
 
 	/* Initialize the driver data */
 	spidev->spi = spi;
+	spin_lock_init(&spidev->spi_lock);
 	mutex_init(&spidev->buf_lock);
 
 	INIT_LIST_HEAD(&spidev->device_entry);
@@ -498,20 +572,20 @@
 	mutex_lock(&device_list_lock);
 	minor = find_first_zero_bit(minors, N_SPI_MINORS);
 	if (minor < N_SPI_MINORS) {
-		spidev->dev.parent = &spi->dev;
-		spidev->dev.class = &spidev_class;
-		spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor);
-		snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id,
+		struct device *dev;
+
+		spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
+		dev = device_create(spidev_class, &spi->dev, spidev->devt,
 				"spidev%d.%d",
 				spi->master->bus_num, spi->chip_select);
-		status = device_register(&spidev->dev);
+		status = IS_ERR(dev) ? PTR_ERR(dev) : 0;
 	} else {
 		dev_dbg(&spi->dev, "no minor number available!\n");
 		status = -ENODEV;
 	}
 	if (status == 0) {
 		set_bit(minor, minors);
-		dev_set_drvdata(&spi->dev, spidev);
+		spi_set_drvdata(spi, spidev);
 		list_add(&spidev->device_entry, &device_list);
 	}
 	mutex_unlock(&device_list_lock);
@@ -524,15 +598,21 @@
 
 static int spidev_remove(struct spi_device *spi)
 {
-	struct spidev_data	*spidev = dev_get_drvdata(&spi->dev);
+	struct spidev_data	*spidev = spi_get_drvdata(spi);
 
+	/* make sure ops on existing fds can abort cleanly */
+	spin_lock_irq(&spidev->spi_lock);
+	spidev->spi = NULL;
+	spi_set_drvdata(spi, NULL);
+	spin_unlock_irq(&spidev->spi_lock);
+
+	/* prevent new opens */
 	mutex_lock(&device_list_lock);
-
 	list_del(&spidev->device_entry);
-	dev_set_drvdata(&spi->dev, NULL);
-	clear_bit(MINOR(spidev->dev.devt), minors);
-	device_unregister(&spidev->dev);
-
+	device_destroy(spidev_class, spidev->devt);
+	clear_bit(MINOR(spidev->devt), minors);
+	if (spidev->users == 0)
+		kfree(spidev);
 	mutex_unlock(&device_list_lock);
 
 	return 0;
@@ -568,15 +648,15 @@
 	if (status < 0)
 		return status;
 
-	status = class_register(&spidev_class);
-	if (status < 0) {
+	spidev_class = class_create(THIS_MODULE, "spidev");
+	if (IS_ERR(spidev_class)) {
 		unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
-		return status;
+		return PTR_ERR(spidev_class);
 	}
 
 	status = spi_register_driver(&spidev_spi);
 	if (status < 0) {
-		class_unregister(&spidev_class);
+		class_destroy(spidev_class);
 		unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
 	}
 	return status;
@@ -586,7 +666,7 @@
 static void __exit spidev_exit(void)
 {
 	spi_unregister_driver(&spidev_spi);
-	class_unregister(&spidev_class);
+	class_destroy(spidev_class);
 	unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
 }
 module_exit(spidev_exit);
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 75def13..d28c538 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -537,12 +537,12 @@
 	int err = 0;
 	u32 tmp;
 
-	might_sleep();
-
 	if (!pdev)
 		goto out;
 	bus = pdev->bus;
 
+	might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
+
 	/* Enable interrupts for this device. */
 	if (bus->host_pci &&
 	    ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
index 5100fbb..a9636f4 100644
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -120,7 +120,7 @@
  * Only data is little endian, addr has cpu endianess
  */
 static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
-				 u16 *data, u16 count)
+				 __le16 *data, u16 count)
 {
 	unsigned long flags;
 	int i;
@@ -129,7 +129,7 @@
 
 	hpi_write_reg(dev, HPI_ADDR, addr);
 	for (i = 0; i < count; i++)
-		hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+		hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
 
 	spin_unlock_irqrestore(&dev->hpi.lock, flags);
 }
@@ -138,7 +138,7 @@
  * Only data is little endian, addr has cpu endianess
  */
 static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
-				u16 *data, u16 count)
+				__le16 *data, u16 count)
 {
 	unsigned long flags;
 	int i;
@@ -146,7 +146,7 @@
 	spin_lock_irqsave(&dev->hpi.lock, flags);
 	hpi_write_reg(dev, HPI_ADDR, addr);
 	for (i = 0; i < count; i++)
-		*data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+		*data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
 
 	spin_unlock_irqrestore(&dev->hpi.lock, flags);
 }
@@ -425,7 +425,7 @@
 		len--;
 	}
 
-	hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+	hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
 	buf += len & ~0x01;
 	addr += len & ~0x01;
 	len &= 0x01;
@@ -456,7 +456,7 @@
 		len--;
 	}
 
-	hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+	hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
 	buf += len & ~0x01;
 	addr += len & ~0x01;
 	len &= 0x01;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 107666d..731db05 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -611,8 +611,8 @@
 		goto err;
 	}
 
-	desc->wMaxPacketSize = ep->wMaxPacketSize;
-	desc->bMaxPacketSize0 = cpu_to_le16(udev->descriptor.bMaxPacketSize0);
+	desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+	desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
 
 	desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
 	if (!desc->orq)
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index c1cb94e..7e912f2 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -155,9 +155,6 @@
 {
 	int err, c;
 
-	/* put device-specific files into sysfs */
-	usb_create_sysfs_dev_files(udev);
-
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
@@ -189,8 +186,6 @@
 	 * unconfigure the device */
 	if (udev->actconfig)
 		usb_set_configuration(udev, -1);
-
-	usb_remove_sysfs_dev_files(udev);
 }
 
 #ifdef	CONFIG_PM
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 1e4b81e..a0bf5df 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -213,6 +213,8 @@
 
 		/* force handover of high-speed port to full-speed companion */
 	void	(*relinquish_port)(struct usb_hcd *, int);
+		/* has a port been handed over to a companion? */
+	int	(*port_handed_over)(struct usb_hcd *, int);
 };
 
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index eb57fcc..8eb4da3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1326,6 +1326,12 @@
 
 	usb_unlock_device(udev);
 
+	/* Remove the device-specific files from sysfs.  This must be
+	 * done with udev unlocked, because some of the attribute
+	 * routines try to acquire the device lock.
+	 */
+	usb_remove_sysfs_dev_files(udev);
+
 	/* Unregister the device.  The device driver is responsible
 	 * for removing the device files from usbfs and sysfs and for
 	 * de-configuring the device.
@@ -1541,6 +1547,9 @@
 		goto fail;
 	}
 
+	/* put device-specific files into sysfs */
+	usb_create_sysfs_dev_files(udev);
+
 	/* Tell the world! */
 	announce_device(udev);
 	return err;
@@ -2744,7 +2753,11 @@
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
 	}
-	dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1);
+	if (hub->hdev->parent ||
+			!hcd->driver->port_handed_over ||
+			!(hcd->driver->port_handed_over)(hcd, port1))
+		dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
+				port1);
  
 done:
 	hub_port_disable(hub, port1, 1);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 2e20193..3da1ab4 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,6 +47,10 @@
 	/* Edirol SD-20 */
 	{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Avision AV600U */
+	{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
+	  USB_QUIRK_STRING_FETCH_255 },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index c783cb1..5e1f5d5 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -588,35 +588,33 @@
 			container_of(kobj, struct device, kobj));
 	size_t nleft = count;
 	size_t srclen, n;
+	int cfgno;
+	void *src;
 
-	usb_lock_device(udev);
-
-	/* The binary attribute begins with the device descriptor */
-	srclen = sizeof(struct usb_device_descriptor);
-	if (off < srclen) {
-		n = min_t(size_t, nleft, srclen - off);
-		memcpy(buf, off + (char *) &udev->descriptor, n);
-		nleft -= n;
-		buf += n;
-		off = 0;
-	} else {
-		off -= srclen;
-	}
-
-	/* Then follows the raw descriptor entry for the current
-	 * configuration (config plus subsidiary descriptors).
+	/* The binary attribute begins with the device descriptor.
+	 * Following that are the raw descriptor entries for all the
+	 * configurations (config plus subsidiary descriptors).
 	 */
-	if (udev->actconfig) {
-		int cfgno = udev->actconfig - udev->config;
-
-		srclen = __le16_to_cpu(udev->actconfig->desc.wTotalLength);
+	for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
+			nleft > 0; ++cfgno) {
+		if (cfgno < 0) {
+			src = &udev->descriptor;
+			srclen = sizeof(struct usb_device_descriptor);
+		} else {
+			src = udev->rawdescriptors[cfgno];
+			srclen = __le16_to_cpu(udev->config[cfgno].desc.
+					wTotalLength);
+		}
 		if (off < srclen) {
-			n = min_t(size_t, nleft, srclen - off);
-			memcpy(buf, off + udev->rawdescriptors[cfgno], n);
+			n = min(nleft, srclen - (size_t) off);
+			memcpy(buf, src + off, n);
 			nleft -= n;
+			buf += n;
+			off = 0;
+		} else {
+			off -= srclen;
 		}
 	}
-	usb_unlock_device(udev);
 	return count - nleft;
 }
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 651b827..1868754 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1627,7 +1627,9 @@
 		udc_reset_ep_queue(udc, pipe);
 
 	/* report disconnect; the driver is already quiesced */
+	spin_unlock(&udc->lock);
 	udc->driver->disconnect(&udc->gadget);
+	spin_lock(&udc->lock);
 
 	return 0;
 }
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1ef6df3..228797e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -300,8 +300,8 @@
 	  module will be called r8a66597-hcd.
 
 config SUPERH_ON_CHIP_R8A66597
-	boolean "Enable SuperH on-chip USB like the R8A66597"
-	depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+	boolean "Enable SuperH on-chip R8A66597 USB"
+	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
 	help
-	   Renesas SuperH processor has USB like the R8A66597.
-	   This driver supported processor is SH7366.
+	   This driver enables support for the on-chip R8A66597 in the
+	   SH7366 and SH7723 processors.
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 8b5f991..08a4335 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -223,6 +223,7 @@
 	.bus_suspend = ehci_bus_suspend,
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6d9bed6..7370d61 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -269,7 +269,7 @@
 	if (retval)
 		return retval;
 
-	ehci->is_tdi_rh_tt = 1;
+	hcd->has_tt = 1;
 
 	ehci->sbrn = 0x20;
 
@@ -295,10 +295,6 @@
 	 */
 	.reset = ehci_fsl_setup,
 	.start = ehci_run,
-#ifdef	CONFIG_PM
-	.suspend = ehci_bus_suspend,
-	.resume = ehci_bus_resume,
-#endif
 	.stop = ehci_stop,
 	.shutdown = ehci_shutdown,
 
@@ -322,6 +318,7 @@
 	.bus_suspend = ehci_bus_suspend,
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
 };
 
 static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 382587c..740835b 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -609,7 +609,7 @@
 			}
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
-			/* we auto-clear this feature */
+			clear_bit(wIndex, &ehci->port_c_suspend);
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC (ehci->hcs_params))
@@ -688,7 +688,7 @@
 			/* resume completed? */
 			else if (time_after_eq(jiffies,
 					ehci->reset_done[wIndex])) {
-				status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+				set_bit(wIndex, &ehci->port_c_suspend);
 				ehci->reset_done[wIndex] = 0;
 
 				/* stop resume signaling */
@@ -765,6 +765,8 @@
 			status |= 1 << USB_PORT_FEAT_RESET;
 		if (temp & PORT_POWER)
 			status |= 1 << USB_PORT_FEAT_POWER;
+		if (test_bit(wIndex, &ehci->port_c_suspend))
+			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 
 #ifndef	VERBOSE_DEBUG
 	if (status & ~0xffff)	/* only if wPortChange is interesting */
@@ -875,3 +877,13 @@
 	set_owner(ehci, --portnum, PORT_OWNER);
 }
 
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32 __iomem		*reg;
+
+	if (ehci_is_TDI(ehci))
+		return 0;
+	reg = &ehci->regs->port_status[portnum - 1];
+	return ehci_readl(ehci, reg) & PORT_OWNER;
+}
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index 601c879..9d042f2 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -26,7 +26,7 @@
 		+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
-	ehci->is_tdi_rh_tt = 1;
+	hcd->has_tt = 1;
 	ehci_reset(ehci);
 
 	retval = ehci_init(hcd);
@@ -58,6 +58,8 @@
 	.bus_suspend		= ehci_bus_suspend,
 	.bus_resume		= ehci_bus_resume,
 #endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
 };
 
 static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 3adfda8..ab625f0 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -139,10 +139,6 @@
 	 */
 	.reset = ehci_orion_setup,
 	.start = ehci_run,
-#ifdef CONFIG_PM
-	.suspend = ehci_bus_suspend,
-	.resume = ehci_bus_resume,
-#endif
 	.stop = ehci_stop,
 	.shutdown = ehci_shutdown,
 
@@ -165,6 +161,8 @@
 	.hub_control = ehci_hub_control,
 	.bus_suspend = ehci_bus_suspend,
 	.bus_resume = ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
 };
 
 static void __init
@@ -250,7 +248,7 @@
 	ehci->regs = hcd->regs + 0x100 +
 		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-	ehci->is_tdi_rh_tt = 1;
+	hcd->has_tt = 1;
 	ehci->sbrn = 0x20;
 
 	/*
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 5bb7f6b..c46a58f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -129,7 +129,6 @@
 	switch (pdev->vendor) {
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
-			ehci->is_tdi_rh_tt = 1;
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
@@ -379,7 +378,8 @@
 	.hub_control =		ehci_hub_control,
 	.bus_suspend =		ehci_bus_suspend,
 	.bus_resume =		ehci_bus_resume,
-	.relinquish_port = 	ehci_relinquish_port,
+	.relinquish_port =	ehci_relinquish_port,
+	.port_handed_over =	ehci_port_handed_over,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index ee305b1..b018dee 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -76,6 +76,8 @@
 	.bus_suspend		= ehci_bus_suspend,
 	.bus_resume		= ehci_bus_resume,
 #endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
 };
 
 
diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c
index 6c76036..529590e 100644
--- a/drivers/usb/host/ehci-ppc-soc.c
+++ b/drivers/usb/host/ehci-ppc-soc.c
@@ -163,6 +163,7 @@
 	.bus_suspend = ehci_bus_suspend,
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
 };
 
 static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 6978222..37e6abe 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -73,6 +73,7 @@
 	.bus_resume		= ehci_bus_resume,
 #endif
 	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
 };
 
 static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index be575e4..b7853c8 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1349,18 +1349,27 @@
 	/* when's the last uframe this urb could start? */
 	max = now + mod;
 
-	/* typical case: reuse current schedule. stream is still active,
-	 * and no gaps from host falling behind (irq delays etc)
+	/* Typical case: reuse current schedule, stream is still active.
+	 * Hopefully there are no gaps from the host falling behind
+	 * (irq delays etc), but if there are we'll take the next
+	 * slot in the schedule, implicitly assuming URB_ISO_ASAP.
 	 */
 	if (likely (!list_empty (&stream->td_list))) {
 		start = stream->next_uframe;
 		if (start < now)
 			start += mod;
-		if (likely ((start + sched->span) < max))
-			goto ready;
-		/* else fell behind; someday, try to reschedule */
-		status = -EL2NSYNC;
-		goto fail;
+
+		/* Fell behind (by up to twice the slop amount)? */
+		if (start >= max - 2 * 8 * SCHEDULE_SLOP)
+			start += stream->interval * DIV_ROUND_UP(
+					max - start, stream->interval) - mod;
+
+		/* Tried to schedule too far into the future? */
+		if (unlikely((start + sched->span) >= max)) {
+			status = -EFBIG;
+			goto fail;
+		}
+		goto ready;
 	}
 
 	/* need to schedule; when's the next (u)frame we could start?
@@ -1613,6 +1622,9 @@
 		} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
 			desc->status = 0;
 			desc->actual_length = EHCI_ITD_LENGTH (t);
+		} else {
+			/* URB was too late */
+			desc->status = -EXDEV;
 		}
 	}
 
@@ -2095,7 +2107,7 @@
 static void
 scan_periodic (struct ehci_hcd *ehci)
 {
-	unsigned	frame, clock, now_uframe, mod;
+	unsigned	now_uframe, frame, clock, clock_frame, mod;
 	unsigned	modified;
 
 	mod = ehci->periodic_size << 3;
@@ -2111,6 +2123,7 @@
 	else
 		clock = now_uframe + mod - 1;
 	clock %= mod;
+	clock_frame = clock >> 3;
 
 	for (;;) {
 		union ehci_shadow	q, *q_p;
@@ -2157,22 +2170,26 @@
 			case Q_TYPE_ITD:
 				/* If this ITD is still active, leave it for
 				 * later processing ... check the next entry.
+				 * No need to check for activity unless the
+				 * frame is current.
 				 */
-				rmb ();
-				for (uf = 0; uf < 8 && live; uf++) {
-					if (0 == (q.itd->hw_transaction [uf]
-							& ITD_ACTIVE(ehci)))
-						continue;
-					incomplete = true;
-					q_p = &q.itd->itd_next;
-					hw_p = &q.itd->hw_next;
-					type = Q_NEXT_TYPE(ehci,
+				if (frame == clock_frame && live) {
+					rmb();
+					for (uf = 0; uf < 8; uf++) {
+						if (q.itd->hw_transaction[uf] &
+							    ITD_ACTIVE(ehci))
+							break;
+					}
+					if (uf < 8) {
+						incomplete = true;
+						q_p = &q.itd->itd_next;
+						hw_p = &q.itd->hw_next;
+						type = Q_NEXT_TYPE(ehci,
 							q.itd->hw_next);
-					q = *q_p;
-					break;
+						q = *q_p;
+						break;
+					}
 				}
-				if (uf < 8 && live)
-					break;
 
 				/* Take finished ITDs out of the schedule
 				 * and process them:  recycle, maybe report
@@ -2189,9 +2206,12 @@
 			case Q_TYPE_SITD:
 				/* If this SITD is still active, leave it for
 				 * later processing ... check the next entry.
+				 * No need to check for activity unless the
+				 * frame is current.
 				 */
-				if ((q.sitd->hw_results & SITD_ACTIVE(ehci))
-						&& live) {
+				if (frame == clock_frame && live &&
+						(q.sitd->hw_results &
+							SITD_ACTIVE(ehci))) {
 					incomplete = true;
 					q_p = &q.sitd->sitd_next;
 					hw_p = &q.sitd->hw_next;
@@ -2260,6 +2280,7 @@
 
 			/* rescan the rest of this frame, then ... */
 			clock = now;
+			clock_frame = clock >> 3;
 		} else {
 			now_uframe++;
 			now_uframe %= mod;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bf92d20..35a0309 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -97,6 +97,8 @@
 			dedicated to the companion controller */
 	unsigned long		owned_ports;		/* which ports are
 			owned by the companion during a bus suspend */
+	unsigned long		port_c_suspend;		/* which ports have
+			the change-suspend feature turned on */
 
 	/* per-HC memory pools (could be per-bus, but ...) */
 	struct dma_pool		*qh_pool;	/* qh per active urb */
@@ -112,7 +114,6 @@
 	u32			command;
 
 	/* SILICON QUIRKS */
-	unsigned		is_tdi_rh_tt:1;	/* TDI roothub with TT */
 	unsigned		no_selective_suspend:1;
 	unsigned		has_fsl_port_bug:1; /* FreeScale */
 	unsigned		big_endian_mmio:1;
@@ -678,7 +679,7 @@
  * needed (mostly in root hub code).
  */
 
-#define	ehci_is_TDI(e)			((e)->is_tdi_rh_tt)
+#define	ehci_is_TDI(e)			(ehci_to_hcd(e)->has_tt)
 
 /* Returns the speed of a device attached to a port on the root hub. */
 static inline unsigned int
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 440bf94..c9db3fe 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -104,8 +104,8 @@
 static u32 iolength;
 static u32 pci_mem_phy0;
 static u32 length;
-static u8 *chip_addr;
-static u8 *iobase;
+static u8 __iomem *chip_addr;
+static u8 __iomem *iobase;
 
 static int __devinit isp1761_pci_probe(struct pci_dev *dev,
 		const struct pci_device_id *id)
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a53db1d..eb6c069 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -269,3 +269,14 @@
 	  See <http://www.linux-usb.org/usbtest/> for more information,
 	  including sample test device firmware and "how to use it".
 
+config USB_ISIGHTFW
+	tristate "iSight firmware loading support"
+	depends on USB
+	help
+	  This driver loads firmware for USB Apple iSight cameras, allowing
+	  them to be driven by the USB video class driver available at
+	  http://linux-uvc.berlios.de
+
+	  The firmware for this driver must be extracted from the MacOS
+	  driver beforehand. Tools for doing so are available at
+	  http://bersace03.free.fr
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index b68e6b7..aba091c 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -14,6 +14,7 @@
 obj-$(CONFIG_USB_FTDI_ELAN)	+= ftdi-elan.o
 obj-$(CONFIG_USB_IDMOUSE)	+= idmouse.o
 obj-$(CONFIG_USB_IOWARRIOR)	+= iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW)	+= isight_firmware.o
 obj-$(CONFIG_USB_LCD)		+= usblcd.o
 obj-$(CONFIG_USB_LD)		+= ldusb.o
 obj-$(CONFIG_USB_LED)		+= usbled.o
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
new file mode 100644
index 0000000..390e048
--- /dev/null
+++ b/drivers/usb/misc/isight_firmware.c
@@ -0,0 +1,131 @@
+/*
+ * Driver for loading USB isight firmware
+ *
+ * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * The USB isight cameras in recent Apples are roughly compatible with the USB
+ * video class specification, and can be driven by uvcvideo. However, they
+ * need firmware to be loaded beforehand. After firmware loading, the device
+ * detaches from the USB bus and reattaches with a new device ID. It can then
+ * be claimed by the uvc driver.
+ *
+ * The firmware is non-free and must be extracted by the user. Tools to do this
+ * are available at http://bersace03.free.fr/ift/
+ *
+ * The isight firmware loading was reverse engineered by Johannes Berg
+ * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
+ * Bultje <rbultje@ronald.bitfreak.net>
+ */
+
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+static struct usb_device_id id_table[] = {
+	{USB_DEVICE(0x05ac, 0x8300)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int isight_firmware_load(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	int llen, len, req, ret = 0;
+	const struct firmware *firmware;
+	unsigned char *buf;
+	unsigned char data[4];
+	char *ptr;
+
+	if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
+		printk(KERN_ERR "Unable to load isight firmware\n");
+		return -ENODEV;
+	}
+
+	ptr = firmware->data;
+
+	if (usb_control_msg
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+	     300) != 1) {
+		printk(KERN_ERR
+		       "Failed to initialise isight firmware loader\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	while (1) {
+		memcpy(data, ptr, 4);
+		len = (data[0] << 8 | data[1]);
+		req = (data[2] << 8 | data[3]);
+		ptr += 4;
+
+		if (len == 0x8001)
+			break;	/* success */
+		else if (len == 0)
+			continue;
+
+		for (; len > 0; req += 50) {
+			llen = len > 50 ? 50 : len;
+			len -= llen;
+
+			buf = kmalloc(llen, GFP_KERNEL);
+			memcpy(buf, ptr, llen);
+
+			ptr += llen;
+
+			if (usb_control_msg
+			    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
+			     buf, llen, 300) != llen) {
+				printk(KERN_ERR
+				       "Failed to load isight firmware\n");
+				kfree(buf);
+				ret = -ENODEV;
+				goto out;
+			}
+
+			kfree(buf);
+		}
+	}
+	if (usb_control_msg
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+	     300) != 1) {
+		printk(KERN_ERR "isight firmware loading completion failed\n");
+		ret = -ENODEV;
+	}
+out:
+	release_firmware(firmware);
+	return ret;
+}
+
+static void isight_firmware_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver isight_firmware_driver = {
+	.name = "isight_firmware",
+	.probe = isight_firmware_load,
+	.disconnect = isight_firmware_disconnect,
+	.id_table = id_table,
+};
+
+static int __init isight_firmware_init(void)
+{
+	return usb_register(&isight_firmware_driver);
+}
+
+static void __exit isight_firmware_exit(void)
+{
+	usb_deregister(&isight_firmware_driver);
+}
+
+module_init(isight_firmware_init);
+module_exit(isight_firmware_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3cee6fe..5234e7a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -174,8 +174,270 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
-	{ USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID),
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) },
+	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a72f2c8..06e0eca 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -114,11 +114,268 @@
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
 
 /*
- * The following are the values for the Matrix Orbital VK204-25-USB
- * display, which use the FT232RL.
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
  */
-#define MTXORB_VK_VID		0x1b3d
-#define MTXORB_VK_PID		0x0158
+#define MTXORB_VID			0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID	0x0100
+#define MTXORB_FTDI_RANGE_0101_PID	0x0101
+#define MTXORB_FTDI_RANGE_0102_PID	0x0102
+#define MTXORB_FTDI_RANGE_0103_PID	0x0103
+#define MTXORB_FTDI_RANGE_0104_PID	0x0104
+#define MTXORB_FTDI_RANGE_0105_PID	0x0105
+#define MTXORB_FTDI_RANGE_0106_PID	0x0106
+#define MTXORB_FTDI_RANGE_0107_PID	0x0107
+#define MTXORB_FTDI_RANGE_0108_PID	0x0108
+#define MTXORB_FTDI_RANGE_0109_PID	0x0109
+#define MTXORB_FTDI_RANGE_010A_PID	0x010A
+#define MTXORB_FTDI_RANGE_010B_PID	0x010B
+#define MTXORB_FTDI_RANGE_010C_PID	0x010C
+#define MTXORB_FTDI_RANGE_010D_PID	0x010D
+#define MTXORB_FTDI_RANGE_010E_PID	0x010E
+#define MTXORB_FTDI_RANGE_010F_PID	0x010F
+#define MTXORB_FTDI_RANGE_0110_PID	0x0110
+#define MTXORB_FTDI_RANGE_0111_PID	0x0111
+#define MTXORB_FTDI_RANGE_0112_PID	0x0112
+#define MTXORB_FTDI_RANGE_0113_PID	0x0113
+#define MTXORB_FTDI_RANGE_0114_PID	0x0114
+#define MTXORB_FTDI_RANGE_0115_PID	0x0115
+#define MTXORB_FTDI_RANGE_0116_PID	0x0116
+#define MTXORB_FTDI_RANGE_0117_PID	0x0117
+#define MTXORB_FTDI_RANGE_0118_PID	0x0118
+#define MTXORB_FTDI_RANGE_0119_PID	0x0119
+#define MTXORB_FTDI_RANGE_011A_PID	0x011A
+#define MTXORB_FTDI_RANGE_011B_PID	0x011B
+#define MTXORB_FTDI_RANGE_011C_PID	0x011C
+#define MTXORB_FTDI_RANGE_011D_PID	0x011D
+#define MTXORB_FTDI_RANGE_011E_PID	0x011E
+#define MTXORB_FTDI_RANGE_011F_PID	0x011F
+#define MTXORB_FTDI_RANGE_0120_PID	0x0120
+#define MTXORB_FTDI_RANGE_0121_PID	0x0121
+#define MTXORB_FTDI_RANGE_0122_PID	0x0122
+#define MTXORB_FTDI_RANGE_0123_PID	0x0123
+#define MTXORB_FTDI_RANGE_0124_PID	0x0124
+#define MTXORB_FTDI_RANGE_0125_PID	0x0125
+#define MTXORB_FTDI_RANGE_0126_PID	0x0126
+#define MTXORB_FTDI_RANGE_0127_PID	0x0127
+#define MTXORB_FTDI_RANGE_0128_PID	0x0128
+#define MTXORB_FTDI_RANGE_0129_PID	0x0129
+#define MTXORB_FTDI_RANGE_012A_PID	0x012A
+#define MTXORB_FTDI_RANGE_012B_PID	0x012B
+#define MTXORB_FTDI_RANGE_012C_PID	0x012C
+#define MTXORB_FTDI_RANGE_012D_PID	0x012D
+#define MTXORB_FTDI_RANGE_012E_PID	0x012E
+#define MTXORB_FTDI_RANGE_012F_PID	0x012F
+#define MTXORB_FTDI_RANGE_0130_PID	0x0130
+#define MTXORB_FTDI_RANGE_0131_PID	0x0131
+#define MTXORB_FTDI_RANGE_0132_PID	0x0132
+#define MTXORB_FTDI_RANGE_0133_PID	0x0133
+#define MTXORB_FTDI_RANGE_0134_PID	0x0134
+#define MTXORB_FTDI_RANGE_0135_PID	0x0135
+#define MTXORB_FTDI_RANGE_0136_PID	0x0136
+#define MTXORB_FTDI_RANGE_0137_PID	0x0137
+#define MTXORB_FTDI_RANGE_0138_PID	0x0138
+#define MTXORB_FTDI_RANGE_0139_PID	0x0139
+#define MTXORB_FTDI_RANGE_013A_PID	0x013A
+#define MTXORB_FTDI_RANGE_013B_PID	0x013B
+#define MTXORB_FTDI_RANGE_013C_PID	0x013C
+#define MTXORB_FTDI_RANGE_013D_PID	0x013D
+#define MTXORB_FTDI_RANGE_013E_PID	0x013E
+#define MTXORB_FTDI_RANGE_013F_PID	0x013F
+#define MTXORB_FTDI_RANGE_0140_PID	0x0140
+#define MTXORB_FTDI_RANGE_0141_PID	0x0141
+#define MTXORB_FTDI_RANGE_0142_PID	0x0142
+#define MTXORB_FTDI_RANGE_0143_PID	0x0143
+#define MTXORB_FTDI_RANGE_0144_PID	0x0144
+#define MTXORB_FTDI_RANGE_0145_PID	0x0145
+#define MTXORB_FTDI_RANGE_0146_PID	0x0146
+#define MTXORB_FTDI_RANGE_0147_PID	0x0147
+#define MTXORB_FTDI_RANGE_0148_PID	0x0148
+#define MTXORB_FTDI_RANGE_0149_PID	0x0149
+#define MTXORB_FTDI_RANGE_014A_PID	0x014A
+#define MTXORB_FTDI_RANGE_014B_PID	0x014B
+#define MTXORB_FTDI_RANGE_014C_PID	0x014C
+#define MTXORB_FTDI_RANGE_014D_PID	0x014D
+#define MTXORB_FTDI_RANGE_014E_PID	0x014E
+#define MTXORB_FTDI_RANGE_014F_PID	0x014F
+#define MTXORB_FTDI_RANGE_0150_PID	0x0150
+#define MTXORB_FTDI_RANGE_0151_PID	0x0151
+#define MTXORB_FTDI_RANGE_0152_PID	0x0152
+#define MTXORB_FTDI_RANGE_0153_PID	0x0153
+#define MTXORB_FTDI_RANGE_0154_PID	0x0154
+#define MTXORB_FTDI_RANGE_0155_PID	0x0155
+#define MTXORB_FTDI_RANGE_0156_PID	0x0156
+#define MTXORB_FTDI_RANGE_0157_PID	0x0157
+#define MTXORB_FTDI_RANGE_0158_PID	0x0158
+#define MTXORB_FTDI_RANGE_0159_PID	0x0159
+#define MTXORB_FTDI_RANGE_015A_PID	0x015A
+#define MTXORB_FTDI_RANGE_015B_PID	0x015B
+#define MTXORB_FTDI_RANGE_015C_PID	0x015C
+#define MTXORB_FTDI_RANGE_015D_PID	0x015D
+#define MTXORB_FTDI_RANGE_015E_PID	0x015E
+#define MTXORB_FTDI_RANGE_015F_PID	0x015F
+#define MTXORB_FTDI_RANGE_0160_PID	0x0160
+#define MTXORB_FTDI_RANGE_0161_PID	0x0161
+#define MTXORB_FTDI_RANGE_0162_PID	0x0162
+#define MTXORB_FTDI_RANGE_0163_PID	0x0163
+#define MTXORB_FTDI_RANGE_0164_PID	0x0164
+#define MTXORB_FTDI_RANGE_0165_PID	0x0165
+#define MTXORB_FTDI_RANGE_0166_PID	0x0166
+#define MTXORB_FTDI_RANGE_0167_PID	0x0167
+#define MTXORB_FTDI_RANGE_0168_PID	0x0168
+#define MTXORB_FTDI_RANGE_0169_PID	0x0169
+#define MTXORB_FTDI_RANGE_016A_PID	0x016A
+#define MTXORB_FTDI_RANGE_016B_PID	0x016B
+#define MTXORB_FTDI_RANGE_016C_PID	0x016C
+#define MTXORB_FTDI_RANGE_016D_PID	0x016D
+#define MTXORB_FTDI_RANGE_016E_PID	0x016E
+#define MTXORB_FTDI_RANGE_016F_PID	0x016F
+#define MTXORB_FTDI_RANGE_0170_PID	0x0170
+#define MTXORB_FTDI_RANGE_0171_PID	0x0171
+#define MTXORB_FTDI_RANGE_0172_PID	0x0172
+#define MTXORB_FTDI_RANGE_0173_PID	0x0173
+#define MTXORB_FTDI_RANGE_0174_PID	0x0174
+#define MTXORB_FTDI_RANGE_0175_PID	0x0175
+#define MTXORB_FTDI_RANGE_0176_PID	0x0176
+#define MTXORB_FTDI_RANGE_0177_PID	0x0177
+#define MTXORB_FTDI_RANGE_0178_PID	0x0178
+#define MTXORB_FTDI_RANGE_0179_PID	0x0179
+#define MTXORB_FTDI_RANGE_017A_PID	0x017A
+#define MTXORB_FTDI_RANGE_017B_PID	0x017B
+#define MTXORB_FTDI_RANGE_017C_PID	0x017C
+#define MTXORB_FTDI_RANGE_017D_PID	0x017D
+#define MTXORB_FTDI_RANGE_017E_PID	0x017E
+#define MTXORB_FTDI_RANGE_017F_PID	0x017F
+#define MTXORB_FTDI_RANGE_0180_PID	0x0180
+#define MTXORB_FTDI_RANGE_0181_PID	0x0181
+#define MTXORB_FTDI_RANGE_0182_PID	0x0182
+#define MTXORB_FTDI_RANGE_0183_PID	0x0183
+#define MTXORB_FTDI_RANGE_0184_PID	0x0184
+#define MTXORB_FTDI_RANGE_0185_PID	0x0185
+#define MTXORB_FTDI_RANGE_0186_PID	0x0186
+#define MTXORB_FTDI_RANGE_0187_PID	0x0187
+#define MTXORB_FTDI_RANGE_0188_PID	0x0188
+#define MTXORB_FTDI_RANGE_0189_PID	0x0189
+#define MTXORB_FTDI_RANGE_018A_PID	0x018A
+#define MTXORB_FTDI_RANGE_018B_PID	0x018B
+#define MTXORB_FTDI_RANGE_018C_PID	0x018C
+#define MTXORB_FTDI_RANGE_018D_PID	0x018D
+#define MTXORB_FTDI_RANGE_018E_PID	0x018E
+#define MTXORB_FTDI_RANGE_018F_PID	0x018F
+#define MTXORB_FTDI_RANGE_0190_PID	0x0190
+#define MTXORB_FTDI_RANGE_0191_PID	0x0191
+#define MTXORB_FTDI_RANGE_0192_PID	0x0192
+#define MTXORB_FTDI_RANGE_0193_PID	0x0193
+#define MTXORB_FTDI_RANGE_0194_PID	0x0194
+#define MTXORB_FTDI_RANGE_0195_PID	0x0195
+#define MTXORB_FTDI_RANGE_0196_PID	0x0196
+#define MTXORB_FTDI_RANGE_0197_PID	0x0197
+#define MTXORB_FTDI_RANGE_0198_PID	0x0198
+#define MTXORB_FTDI_RANGE_0199_PID	0x0199
+#define MTXORB_FTDI_RANGE_019A_PID	0x019A
+#define MTXORB_FTDI_RANGE_019B_PID	0x019B
+#define MTXORB_FTDI_RANGE_019C_PID	0x019C
+#define MTXORB_FTDI_RANGE_019D_PID	0x019D
+#define MTXORB_FTDI_RANGE_019E_PID	0x019E
+#define MTXORB_FTDI_RANGE_019F_PID	0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID	0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID	0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID	0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID	0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID	0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID	0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID	0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID	0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID	0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID	0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID	0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID	0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID	0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID	0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID	0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID	0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID	0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID	0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID	0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID	0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID	0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID	0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID	0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID	0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID	0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID	0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID	0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID	0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID	0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID	0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID	0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID	0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID	0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID	0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID	0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID	0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID	0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID	0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID	0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID	0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID	0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID	0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID	0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID	0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID	0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID	0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID	0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID	0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID	0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID	0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID	0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID	0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID	0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID	0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID	0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID	0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID	0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID	0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID	0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID	0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID	0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID	0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID	0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID	0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID	0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID	0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID	0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID	0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID	0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID	0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID	0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID	0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID	0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID	0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID	0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID	0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID	0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID	0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID	0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID	0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID	0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID	0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID	0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID	0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID	0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID	0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID	0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID	0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID	0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID	0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID	0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID	0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID	0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
+
+
 
 /* Interbiometrics USB I/O Board */
 /* Developed for Interbiometrics by Rudolf Gugler */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6cecd2c..43cfde8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -236,25 +236,25 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 234c5ee..103195a 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -56,6 +56,7 @@
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3bdefe0..cff160a 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -14,6 +14,7 @@
 #define PL2303_PRODUCT_ID_PHAROS	0xaaa0
 #define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
 #define PL2303_PRODUCT_ID_ALDIGA	0x0611
+#define PL2303_PRODUCT_ID_MMX		0x0612
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1b09578..45fe366 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -405,7 +405,7 @@
 UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
 		"Cypress",
 		"Cypress AT2LP",
-		US_SC_CYP_ATACB, US_PR_BULK, NULL,
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
 		0),
 #endif
 
@@ -1522,7 +1522,7 @@
 		"Sony Ericsson",
 		"M600i",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
@@ -1716,10 +1716,12 @@
 /*
  * Patch by Pete Zaitcev <zaitcev@redhat.com>
  * Report by Mark Patton. Red Hat bz#208928.
+ * Added support for rev 0x0002 (Motorola ROKR W5)
+ * by Javier Smaldone <javier@smaldone.com.ar>
  */
-UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0001,
+UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0002,
 		"Motorola",
-		"RAZR V3i",
+		"RAZR V3i/ROKR W5",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index e4bcf53..bd4ac0b 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3356,7 +3356,7 @@
 
 	info->fix.mmio_start = raddr;
 	par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
-	if (par->ati_regbase == 0)
+	if (par->ati_regbase == NULL)
 		return -ENOMEM;
 
 	info->fix.mmio_start += par->aux_start ? 0x400 : 0xc00;
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 72cd0d2..400e926 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2277,8 +2277,8 @@
 	do {
 		rinfo->fb_base = ioremap (rinfo->fb_base_phys,
 					  rinfo->mapped_vram);
-	} while (   rinfo->fb_base == 0 &&
-		  ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) );
+	} while (rinfo->fb_base == NULL &&
+		 ((rinfo->mapped_vram /= 2) >= MIN_MAPPED_VRAM));
 
 	if (rinfo->fb_base == NULL) {
 		printk (KERN_ERR "radeonfb (%s): cannot map FB\n",
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 5fa8b76..97aff8d 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2275,9 +2275,7 @@
 	 * in fb_set_var()
 	 */
 	info->var.activate = var.activate;
-	var.yoffset = info->var.yoffset;
-	var.xoffset = info->var.xoffset;
-	var.vmode = info->var.vmode;
+	var.vmode |= info->var.vmode & ~FB_VMODE_MASK;
 	fb_set_var(info, &var);
 	ops->var = info->var;
 
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index f3107ad..9588323 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -200,7 +200,7 @@
 		virt->vaddr = ioremap_nocache(phys, size);
 	else
 		virt->vaddr = ioremap(phys, size);
-	return (virt->vaddr == 0); /* 0, !0... 0, error_code in future */
+	return (virt->vaddr == NULL); /* 0, !0... 0, error_code in future */
 }
 
 static inline void mga_iounmap(vaddr_t va) {
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 4735621..d3c3af5 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -28,6 +28,7 @@
 #endif
 
 const char *fb_mode_option;
+EXPORT_SYMBOL_GPL(fb_mode_option);
 
     /*
      *  Standard video mode definitions (taken from XFree86)
@@ -590,6 +591,7 @@
 		    "", (margins) ? " with margins" : "", (interlace) ?
 		    " interlaced" : "");
 
+	    memset(&cvt_mode, 0, sizeof(cvt_mode));
 	    cvt_mode.xres = xres;
 	    cvt_mode.yres = yres;
 	    cvt_mode.refresh = (refresh) ? refresh : 60;
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3ee314b..274bc93 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1351,7 +1351,6 @@
 	struct pxafb_info *fbi;
 	void *addr;
 	struct pxafb_mach_info *inf = dev->platform_data;
-	struct pxafb_mode_info *mode = inf->modes;
 
 	/* Alloc the pxafb_info and pseudo_palette in one step */
 	fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 13b38cb..f059896 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1,75 +1,15 @@
-/*
- * linux/drivers/video/s3c2410fb.c
- *	Copyright (c) Arnaud Patard, Ben Dooks
+/* linux/drivers/video/s3c2410fb.c
+ *	Copyright (c) 2004,2005 Arnaud Patard
+ *	Copyright (c) 2004-2008 Ben Dooks
+ *
+ * S3C2410 LCD Framebuffer Driver
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive for
  * more details.
  *
- *	    S3C2410 LCD Controller Frame Buffer Driver
- *	    based on skeletonfb.c, sa1100fb.c and others
- *
- * ChangeLog
- * 2005-04-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- *      - u32 state -> pm_message_t state
- *      - S3C2410_{VA,SZ}_LCD -> S3C24XX
- *
- * 2005-03-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- *      - Removed the ioctl
- *      - use readl/writel instead of __raw_writel/__raw_readl
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- *      - Added the possibility to set on or off the
- *      debugging messages
- *      - Replaced 0 and 1 by on or off when reading the
- *      /sys files
- *
- * 2005-03-23: Ben Dooks <ben-linux@fluff.org>
- *	- added non 16bpp modes
- *	- updated platform information for range of x/y/bpp
- *	- add code to ensure palette is written correctly
- *	- add pixel clock divisor control
- *
- * 2004-11-11: Arnaud Patard <arnaud.patard@rtp-net.org>
- *	- Removed the use of currcon as it no more exists
- *	- Added LCD power sysfs interface
- *
- * 2004-11-03: Ben Dooks <ben-linux@fluff.org>
- *	- minor cleanups
- *	- add suspend/resume support
- *	- s3c2410fb_setcolreg() not valid in >8bpp modes
- *	- removed last CONFIG_FB_S3C2410_FIXED
- *	- ensure lcd controller stopped before cleanup
- *	- added sysfs interface for backlight power
- *	- added mask for gpio configuration
- *	- ensured IRQs disabled during GPIO configuration
- *	- disable TPAL before enabling video
- *
- * 2004-09-20: Arnaud Patard <arnaud.patard@rtp-net.org>
- *      - Suppress command line options
- *
- * 2004-09-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- *	- code cleanup
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- *	- Renamed from h1940fb.c to s3c2410fb.c
- *	- Add support for different devices
- *	- Backlight support
- *
- * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
- *	- added clock (de-)allocation code
- *	- added fixem fbmem option
- *
- * 2004-07-27: Arnaud Patard <arnaud.patard@rtp-net.org>
- *	- code cleanup
- *	- added a forgotten return in h1940fb_init
- *
- * 2004-07-19: Herbert Pötzl <herbert@13thfloor.at>
- *	- code cleanup and extended debugging
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- *	- First version
- */
+ * Driver based on skeletonfb.c, sa1100fb.c and others.
+*/
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -580,6 +520,27 @@
 	return 0;
 }
 
+/* s3c2410fb_lcd_enable
+ *
+ * shutdown the lcd controller
+ */
+static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (enable)
+		fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
+	else
+		fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
+
+	writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
+
+	local_irq_restore(flags);
+}
+
+
 /*
  *      s3c2410fb_blank
  *	@blank_mode: the blank mode we want.
@@ -589,9 +550,6 @@
  *	blanking succeeded, != 0 if un-/blanking failed due to e.g. a
  *	video mode which doesn't support it. Implements VESA suspend
  *	and powerdown modes on hardware that supports disabling hsync/vsync:
- *	blank_mode == 2: suspend vsync
- *	blank_mode == 3: suspend hsync
- *	blank_mode == 4: powerdown
  *
  *	Returns negative errno on error, or zero on success.
  *
@@ -605,6 +563,12 @@
 
 	tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;
 
+	if (blank_mode == FB_BLANK_POWERDOWN) {
+		s3c2410fb_lcd_enable(fbi, 0);
+	} else {
+		s3c2410fb_lcd_enable(fbi, 1);
+	}
+
 	if (blank_mode == FB_BLANK_UNBLANK)
 		writel(0x0, tpal_reg);
 	else {
@@ -948,7 +912,10 @@
 	}
 
 	/* create device files */
-	device_create_file(&pdev->dev, &dev_attr_debug);
+	ret = device_create_file(&pdev->dev, &dev_attr_debug);
+	if (ret) {
+		printk(KERN_ERR "failed to add debug attribute\n");
+	}
 
 	printk(KERN_INFO "fb%d: %s frame buffer device\n",
 		fbinfo->node, fbinfo->fix.id);
@@ -983,21 +950,6 @@
 	return s3c24xxfb_probe(pdev, DRV_S3C2412);
 }
 
-/* s3c2410fb_stop_lcd
- *
- * shutdown the lcd controller
- */
-static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
-	writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
-
-	local_irq_restore(flags);
-}
 
 /*
  *  Cleanup
@@ -1010,7 +962,7 @@
 
 	unregister_framebuffer(fbinfo);
 
-	s3c2410fb_stop_lcd(info);
+	s3c2410fb_lcd_enable(info, 0);
 	msleep(1);
 
 	s3c2410fb_unmap_video_memory(fbinfo);
@@ -1043,7 +995,7 @@
 	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
 	struct s3c2410fb_info *info = fbinfo->par;
 
-	s3c2410fb_stop_lcd(info);
+	s3c2410fb_lcd_enable(info, 0);
 
 	/* sleep before disabling the clock, we need to ensure
 	 * the LCD DMA engine is not going to get back on the bus
@@ -1118,3 +1070,5 @@
 	      "Ben Dooks <ben-linux@fluff.org>");
 MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-lcd");
+MODULE_ALIAS("platform:s3c2412-lcd");
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h
index dbb73b9..9a6ba3e 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/s3c2410fb.h
@@ -1,26 +1,14 @@
 /*
  * linux/drivers/video/s3c2410fb.h
- * Copyright (c) Arnaud Patard
+ *	Copyright (c) 2004 Arnaud Patard
+ *
+ *  S3C2410 LCD Framebuffer Driver
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive for
  * more details.
  *
- *	    S3C2410 LCD Controller Frame Buffer Driver
- *	    based on skeletonfb.c, sa1100fb.h
- *
- * ChangeLog
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- *      - Moved dprintk to s3c2410fb.c
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * 	- Renamed from h1940fb.h to s3c2410fb.h
- * 	- Changed h1940 to s3c2410
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- *	- First version
- */
+*/
 
 #ifndef __S3C2410FB_H
 #define __S3C2410FB_H
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7380362..b934384 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -5787,7 +5787,7 @@
 	} else {
 		struct sis_video_info *countvideo = card_list;
 		ivideo->cardnumber = 1;
-		while((countvideo = countvideo->next) != 0)
+		while((countvideo = countvideo->next) != NULL)
 			ivideo->cardnumber++;
 	}
 
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 742b5c6..15d4a76 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -663,14 +663,14 @@
 		sm501fb_sync_regs(fbi);
 		mdelay(10);
 
-		if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
 			control |= SM501_DC_PANEL_CONTROL_BIAS;	/* VBIASEN */
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
 			mdelay(10);
 		}
 
-		if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
 			control |= SM501_DC_PANEL_CONTROL_FPEN;
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
@@ -678,14 +678,14 @@
 		}
 	} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
 		/* disable panel power */
-		if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
 			control &= ~SM501_DC_PANEL_CONTROL_FPEN;
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
 			mdelay(10);
 		}
 
-		if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
 			control &= ~SM501_DC_PANEL_CONTROL_BIAS;
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 1386678..0f3c2bb 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -2,6 +2,9 @@
 #include <linux/spinlock.h>
 #include <linux/virtio_config.h>
 
+/* Unique numbering for virtio devices. */
+static unsigned int dev_index;
+
 static ssize_t device_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
@@ -166,7 +169,10 @@
 	int err;
 
 	dev->dev.bus = &virtio_bus;
-	sprintf(dev->dev.bus_id, "%u", dev->index);
+
+	/* Assign a unique device index and hence name. */
+	dev->index = dev_index++;
+	sprintf(dev->dev.bus_id, "virtio%u", dev->index);
 
 	/* We always start by resetting the device, in case a previous
 	 * driver messed it up.  This also tests that code path a little. */
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 27e9fc9..eae72363 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -78,9 +78,6 @@
 	.bus_id		= "virtio-pci",
 };
 
-/* Unique numbering for devices under the kvm root */
-static unsigned int dev_index;
-
 /* Convert a generic virtio device to our structure */
 static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
 {
@@ -325,10 +322,6 @@
 	if (vp_dev == NULL)
 		return -ENOMEM;
 
-	snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index);
-	vp_dev->vdev.index = dev_index;
-	dev_index++;
-
 	vp_dev->vdev.dev.parent = &virtio_pci_root;
 	vp_dev->vdev.config = &virtio_pci_config_ops;
 	vp_dev->pci_dev = pci_dev;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 937a49d..72bf8bc 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -227,7 +227,6 @@
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
 	START_USE(vq);
-	BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT));
 
 	/* We optimistically turn back on interrupts, then check if there was
 	 * more to do. */
@@ -254,13 +253,6 @@
 	if (unlikely(vq->broken))
 		return IRQ_HANDLED;
 
-	/* Other side may have missed us turning off the interrupt,
-	 * but we should preserve disable semantic for virtio users. */
-	if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
-		pr_debug("virtqueue interrupt after disable for %p\n", vq);
-		return IRQ_HANDLED;
-	}
-
 	pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
 	if (vq->vq.callback)
 		vq->vq.callback(&vq->vq);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 254d115..ccb78f6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -295,6 +295,19 @@
 
 	  Most people will say N.
 
+config GEODE_WDT
+	tristate "AMD Geode CS5535/CS5536 Watchdog"
+	depends on MGEODE_LX
+	help
+	  This driver enables a watchdog capability built into the
+	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
+	  processors.  This watchdog watches your kernel to make sure
+	  it doesn't freeze, and if it does, it reboots your computer after
+	  a certain amount of time.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called geodewdt.
+
 config SC520_WDT
 	tristate "AMD Elan SC520 processor Watchdog"
 	depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f3fb170..25b352b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -59,6 +59,7 @@
 obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
 obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
 obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_GEODE_WDT) += geodewdt.o
 obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
 obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
 obj-$(CONFIG_IB700_WDT) += ib700wdt.o
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 1237113..03b3e3d 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -29,7 +29,8 @@
 
 #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
 #define stampit() stamp("here i am")
-#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
 
 #define WATCHDOG_NAME "bfin-wdt"
 #define PFX WATCHDOG_NAME ": "
@@ -377,20 +378,6 @@
 # define bfin_wdt_resume NULL
 #endif
 
-static struct platform_device bfin_wdt_device = {
-	.name          = WATCHDOG_NAME,
-	.id            = -1,
-};
-
-static struct platform_driver bfin_wdt_driver = {
-	.driver    = {
-		.name  = WATCHDOG_NAME,
-		.owner = THIS_MODULE,
-	},
-	.suspend   = bfin_wdt_suspend,
-	.resume    = bfin_wdt_resume,
-};
-
 static const struct file_operations bfin_wdt_fops = {
 	.owner    = THIS_MODULE,
 	.llseek   = no_llseek,
@@ -418,10 +405,66 @@
 };
 
 /**
+ *	bfin_wdt_probe - Initialize module
+ *
+ *	Registers the misc device and notifier handler.  Actual device
+ *	initialization is handled by bfin_wdt_open().
+ */
+static int __devinit bfin_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = register_reboot_notifier(&bfin_wdt_notifier);
+	if (ret) {
+		pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+		return ret;
+	}
+
+	ret = misc_register(&bfin_wdt_miscdev);
+	if (ret) {
+		pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		unregister_reboot_notifier(&bfin_wdt_notifier);
+		return ret;
+	}
+
+	pr_devinit(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
+	       timeout, nowayout);
+
+	return 0;
+}
+
+/**
+ *	bfin_wdt_remove - Initialize module
+ *
+ *	Unregisters the misc device and notifier handler.  Actual device
+ *	deinitialization is handled by bfin_wdt_close().
+ */
+static int __devexit bfin_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&bfin_wdt_miscdev);
+	unregister_reboot_notifier(&bfin_wdt_notifier);
+	return 0;
+}
+
+static struct platform_device *bfin_wdt_device;
+
+static struct platform_driver bfin_wdt_driver = {
+	.probe     = bfin_wdt_probe,
+	.remove    = __devexit_p(bfin_wdt_remove),
+	.suspend   = bfin_wdt_suspend,
+	.resume    = bfin_wdt_resume,
+	.driver    = {
+		.name  = WATCHDOG_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+/**
  *	bfin_wdt_init - Initialize module
  *
- *	Registers the device and notifier handler. Actual device
- *	initialization is handled by bfin_wdt_open().
+ *	Checks the module params and registers the platform device & driver.
+ *	Real work is in the platform probe function.
  */
 static int __init bfin_wdt_init(void)
 {
@@ -436,44 +479,32 @@
 	/* Since this is an on-chip device and needs no board-specific
 	 * resources, we'll handle all the platform device stuff here.
 	 */
-	ret = platform_device_register(&bfin_wdt_device);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_probe(&bfin_wdt_driver, NULL);
-	if (ret)
-		return ret;
-
-	ret = register_reboot_notifier(&bfin_wdt_notifier);
+	ret = platform_driver_register(&bfin_wdt_driver);
 	if (ret) {
-		pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+		pr_init(KERN_ERR PFX "unable to register driver\n");
 		return ret;
 	}
 
-	ret = misc_register(&bfin_wdt_miscdev);
-	if (ret) {
-		pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-		       WATCHDOG_MINOR, ret);
-		unregister_reboot_notifier(&bfin_wdt_notifier);
-		return ret;
+	bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
+	if (IS_ERR(bfin_wdt_device)) {
+		pr_init(KERN_ERR PFX "unable to register device\n");
+		platform_driver_unregister(&bfin_wdt_driver);
+		return PTR_ERR(bfin_wdt_device);
 	}
 
-	pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
-	       timeout, nowayout);
-
 	return 0;
 }
 
 /**
  *	bfin_wdt_exit - Deinitialize module
  *
- *	Unregisters the device and notifier handler. Actual device
- *	deinitialization is handled by bfin_wdt_close().
+ *	Back out the platform device & driver steps.  Real work is in the
+ *	platform remove function.
  */
 static void __exit bfin_wdt_exit(void)
 {
-	misc_deregister(&bfin_wdt_miscdev);
-	unregister_reboot_notifier(&bfin_wdt_notifier);
+	platform_device_unregister(bfin_wdt_device);
+	platform_driver_unregister(&bfin_wdt_driver);
 }
 
 module_init(bfin_wdt_init);
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index d362f5b..c1ba0db 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -1,12 +1,10 @@
 /*
- * drivers/char/watchdog/booke_wdt.c
- *
  * Watchdog timer for PowerPC Book-E systems
  *
  * Author: Matthew McClintock
  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -16,6 +14,7 @@
 
 #include <linux/module.h>
 #include <linux/fs.h>
+#include <linux/smp.h>
 #include <linux/miscdevice.h>
 #include <linux/notifier.h>
 #include <linux/watchdog.h>
@@ -38,7 +37,7 @@
 #define WDT_PERIOD_DEFAULT 3	/* Refer to the PPC40x and PPC4xx manuals */
 #endif				/* for timing information */
 
-u32 booke_wdt_enabled = 0;
+u32 booke_wdt_enabled;
 u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
 
 #ifdef	CONFIG_FSL_BOOKE
@@ -47,33 +46,31 @@
 #define WDTP(x)		(TCR_WP(x))
 #endif
 
-/*
- * booke_wdt_ping:
- */
-static __inline__ void booke_wdt_ping(void)
+static DEFINE_SPINLOCK(booke_wdt_lock);
+
+static void __booke_wdt_ping(void *data)
 {
 	mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
 }
 
-/*
- * booke_wdt_enable:
- */
-static __inline__ void booke_wdt_enable(void)
+static void booke_wdt_ping(void)
+{
+	on_each_cpu(__booke_wdt_ping, NULL, 0, 0);
+}
+
+static void __booke_wdt_enable(void *data)
 {
 	u32 val;
 
 	/* clear status before enabling watchdog */
-	booke_wdt_ping();
+	__booke_wdt_ping(NULL);
 	val = mfspr(SPRN_TCR);
 	val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
 
 	mtspr(SPRN_TCR, val);
 }
 
-/*
- * booke_wdt_write:
- */
-static ssize_t booke_wdt_write (struct file *file, const char __user *buf,
+static ssize_t booke_wdt_write(struct file *file, const char __user *buf,
 				size_t count, loff_t *ppos)
 {
 	booke_wdt_ping();
@@ -81,15 +78,11 @@
 }
 
 static struct watchdog_info ident = {
-  .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-  .firmware_version = 0,
-  .identity = "PowerPC Book-E Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "PowerPC Book-E Watchdog",
 };
 
-/*
- * booke_wdt_ioctl:
- */
-static int booke_wdt_ioctl (struct inode *inode, struct file *file,
+static int booke_wdt_ioctl(struct inode *inode, struct file *file,
 			    unsigned int cmd, unsigned long arg)
 {
 	u32 tmp = 0;
@@ -97,7 +90,7 @@
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user ((struct watchdog_info __user *) arg, &ident,
+		if (copy_to_user((struct watchdog_info __user *)arg, &ident,
 				sizeof(struct watchdog_info)))
 			return -EFAULT;
 	case WDIOC_GETSTATUS:
@@ -132,33 +125,33 @@
 
 	return 0;
 }
-/*
- * booke_wdt_open:
- */
-static int booke_wdt_open (struct inode *inode, struct file *file)
+
+static int booke_wdt_open(struct inode *inode, struct file *file)
 {
+	spin_lock(&booke_wdt_lock);
 	if (booke_wdt_enabled == 0) {
 		booke_wdt_enabled = 1;
-		booke_wdt_enable();
-		printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
-				booke_wdt_period);
+		on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
+		printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+				"(wdt_period=%d)\n", booke_wdt_period);
 	}
+	spin_unlock(&booke_wdt_lock);
 
 	return nonseekable_open(inode, file);
 }
 
 static const struct file_operations booke_wdt_fops = {
-  .owner = THIS_MODULE,
-  .llseek = no_llseek,
-  .write = booke_wdt_write,
-  .ioctl = booke_wdt_ioctl,
-  .open = booke_wdt_open,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = booke_wdt_write,
+	.ioctl = booke_wdt_ioctl,
+	.open = booke_wdt_open,
 };
 
 static struct miscdevice booke_wdt_miscdev = {
-  .minor = WATCHDOG_MINOR,
-  .name = "watchdog",
-  .fops = &booke_wdt_fops,
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &booke_wdt_fops,
 };
 
 static void __exit booke_wdt_exit(void)
@@ -166,28 +159,27 @@
 	misc_deregister(&booke_wdt_miscdev);
 }
 
-/*
- * booke_wdt_init:
- */
 static int __init booke_wdt_init(void)
 {
 	int ret = 0;
 
-	printk (KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
+	printk(KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
 	ident.firmware_version = cur_cpu_spec->pvr_value;
 
 	ret = misc_register(&booke_wdt_miscdev);
 	if (ret) {
-		printk (KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n",
+		printk(KERN_CRIT "Cannot register miscdev on minor=%d: %d\n",
 				WATCHDOG_MINOR, ret);
 		return ret;
 	}
 
+	spin_lock(&booke_wdt_lock);
 	if (booke_wdt_enabled == 1) {
-		printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
-				booke_wdt_period);
-		booke_wdt_enable();
+		printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+				"(wdt_period=%d)\n", booke_wdt_period);
+		on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
 	}
+	spin_unlock(&booke_wdt_lock);
 
 	return ret;
 }
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
new file mode 100644
index 0000000..30d09cb
--- /dev/null
+++ b/drivers/watchdog/geodewdt.c
@@ -0,0 +1,308 @@
+/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip
+ *
+ * Copyright (C) 2006-2007, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/uaccess.h>
+#include <asm/geode.h>
+
+#define GEODEWDT_HZ 500
+#define GEODEWDT_SCALE 6
+#define GEODEWDT_MAX_SECONDS 131
+
+#define WDT_FLAGS_OPEN 1
+#define WDT_FLAGS_ORPHAN 2
+
+#define DRV_NAME "geodewdt"
+#define WATCHDOG_NAME "Geode GX/LX WDT"
+#define WATCHDOG_TIMEOUT 60
+
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct platform_device *geodewdt_platform_device;
+static unsigned long wdt_flags;
+static int wdt_timer;
+static int safe_close;
+
+static void geodewdt_ping(void)
+{
+	/* Stop the counter */
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+
+	/* Reset the counter */
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+
+	/* Enable the counter */
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+}
+
+static void geodewdt_disable(void)
+{
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+}
+
+static int geodewdt_set_heartbeat(int val)
+{
+	if (val < 1 || val > GEODEWDT_MAX_SECONDS)
+		return -EINVAL;
+
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ);
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+
+	timeout = val;
+	return 0;
+}
+
+static int
+geodewdt_open(struct inode *inode, struct file *file)
+{
+        if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
+                return -EBUSY;
+
+        if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
+                __module_get(THIS_MODULE);
+
+	geodewdt_ping();
+        return nonseekable_open(inode, file);
+}
+
+static int
+geodewdt_release(struct inode *inode, struct file *file)
+{
+	if (safe_close) {
+		geodewdt_disable();
+		module_put(THIS_MODULE);
+	}
+	else {
+		printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n");
+		geodewdt_ping();
+
+		set_bit(WDT_FLAGS_ORPHAN, &wdt_flags);
+	}
+
+	clear_bit(WDT_FLAGS_OPEN, &wdt_flags);
+	safe_close = 0;
+	return 0;
+}
+
+static ssize_t
+geodewdt_write(struct file *file, const char __user *data, size_t len,
+	       loff_t *ppos)
+{
+        if(len) {
+		if (!nowayout) {
+			size_t i;
+			safe_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+
+				if (c == 'V')
+					safe_close = 1;
+			}
+		}
+
+		geodewdt_ping();
+	}
+	return len;
+}
+
+static int
+geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+	       unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int interval;
+
+	static struct watchdog_info ident = {
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+		| WDIOF_MAGICCLOSE,
+		.firmware_version =     1,
+		.identity =             WATCHDOG_NAME,
+        };
+
+	switch(cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident,
+				    sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		geodewdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(interval, p))
+			return -EFAULT;
+
+		if (geodewdt_set_heartbeat(interval))
+			return -EINVAL;
+
+/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, ret = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			geodewdt_disable();
+			ret = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			geodewdt_ping();
+			ret = 0;
+		}
+
+		return ret;
+	}
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static const struct file_operations geodewdt_fops = {
+        .owner          = THIS_MODULE,
+        .llseek         = no_llseek,
+        .write          = geodewdt_write,
+        .ioctl          = geodewdt_ioctl,
+        .open           = geodewdt_open,
+        .release        = geodewdt_release,
+};
+
+static struct miscdevice geodewdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &geodewdt_fops
+};
+
+static int __devinit
+geodewdt_probe(struct platform_device *dev)
+{
+	int ret, timer;
+
+	timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
+
+	if (timer == -1) {
+		printk(KERN_ERR "geodewdt:  No timers were available\n");
+		return -ENODEV;
+	}
+
+	wdt_timer = timer;
+
+	/* Set up the timer */
+
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP,
+			  GEODEWDT_SCALE | (3 << 8));
+
+	/* Set up comparator 2 to reset when the event fires */
+	geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1);
+
+	/* Set up the initial timeout */
+
+	geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2,
+		timeout * GEODEWDT_HZ);
+
+	ret = misc_register(&geodewdt_miscdev);
+
+	return ret;
+}
+
+static int __devexit
+geodewdt_remove(struct platform_device *dev)
+{
+	misc_deregister(&geodewdt_miscdev);
+	return 0;
+}
+
+static void
+geodewdt_shutdown(struct platform_device *dev)
+{
+	geodewdt_disable();
+}
+
+static struct platform_driver geodewdt_driver = {
+	.probe		= geodewdt_probe,
+	.remove		= __devexit_p(geodewdt_remove),
+	.shutdown	= geodewdt_shutdown,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init
+geodewdt_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&geodewdt_driver);
+	if (ret)
+		return ret;
+
+	geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	if (IS_ERR(geodewdt_platform_device)) {
+		ret = PTR_ERR(geodewdt_platform_device);
+		goto err;
+	}
+
+	return 0;
+err:
+	platform_driver_unregister(&geodewdt_driver);
+	return ret;
+}
+
+static void __exit
+geodewdt_exit(void)
+{
+	platform_device_unregister(geodewdt_platform_device);
+	platform_driver_unregister(&geodewdt_driver);
+}
+
+module_init(geodewdt_init);
+module_exit(geodewdt_exit);
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 6483d10..6a63535 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -418,23 +418,20 @@
 	static unsigned long rom_pl;
 	static int die_nmi_called;
 
-	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
-		return NOTIFY_OK;
-
-	spin_lock_irqsave(&rom_lock, rom_pl);
-	if (!die_nmi_called)
-		asminline_call(&cmn_regs, cru_rom_addr);
-	die_nmi_called = 1;
-	spin_unlock_irqrestore(&rom_lock, rom_pl);
-	if (cmn_regs.u1.ral == 0) {
-		printk(KERN_WARNING "hpwdt: An NMI occurred, "
-		       "but unable to determine source.\n");
-	} else {
-		panic("An NMI occurred, please see the Integrated "
-			"Management Log for details.\n");
+	if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) {
+		spin_lock_irqsave(&rom_lock, rom_pl);
+		if (!die_nmi_called)
+			asminline_call(&cmn_regs, cru_rom_addr);
+		die_nmi_called = 1;
+		spin_unlock_irqrestore(&rom_lock, rom_pl);
+		if (cmn_regs.u1.ral != 0) {
+			panic("An NMI occurred, please see the Integrated "
+			      "Management Log for details.\n");
+		}
 	}
 
-	return NOTIFY_STOP;
+	die_nmi_called = 0;
+	return NOTIFY_DONE;
 }
 
 /*
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index a0e6809..95ba985 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -41,9 +41,10 @@
  *	82801HH  (ICH8DH)    : document number 313056-003, 313057-009,
  *	82801HO  (ICH8DO)    : document number 313056-003, 313057-009,
  *	82801HEM (ICH8M-E)   : document number 313056-003, 313057-009,
- *	82801IB  (ICH9)      : document number 316972-001, 316973-001,
- *	82801IR  (ICH9R)     : document number 316972-001, 316973-001,
- *	82801IH  (ICH9DH)    : document number 316972-001, 316973-001,
+ *	82801IB  (ICH9)      : document number 316972-001, 316973-006,
+ *	82801IR  (ICH9R)     : document number 316972-001, 316973-006,
+ *	82801IH  (ICH9DH)    : document number 316972-001, 316973-006,
+ *	82801IO  (ICH9DO)    : document number 316972-001, 316973-006,
  *	6300ESB  (6300ESB)   : document number 300641-003, 300884-010,
  *	631xESB  (631xESB)   : document number 313082-001, 313075-005,
  *	632xESB  (632xESB)   : document number 313082-001, 313075-005
@@ -55,8 +56,8 @@
 
 /* Module and version information */
 #define DRV_NAME        "iTCO_wdt"
-#define DRV_VERSION     "1.02"
-#define DRV_RELDATE     "26-Jul-2007"
+#define DRV_VERSION     "1.03"
+#define DRV_RELDATE     "30-Apr-2008"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -104,6 +105,7 @@
 	TCO_ICH9,	/* ICH9 */
 	TCO_ICH9R,	/* ICH9R */
 	TCO_ICH9DH,	/* ICH9DH */
+	TCO_ICH9DO,     /* ICH9DO */
 	TCO_631XESB,	/* 631xESB/632xESB */
 };
 
@@ -136,6 +138,7 @@
 	{"ICH9", 2},
 	{"ICH9R", 2},
 	{"ICH9DH", 2},
+	{"ICH9DO", 2},
 	{"631xESB/632xESB", 2},
 	{NULL,0}
 };
@@ -181,6 +184,7 @@
 	{ ITCO_PCI_DEVICE(0x2918,				TCO_ICH9   )},
 	{ ITCO_PCI_DEVICE(0x2916,				TCO_ICH9R  )},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2,		TCO_ICH9DH )},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4,           TCO_ICH9DO )},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0,		TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2671,				TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2672,				TCO_631XESB)},
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index c622a0e..528b882 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -44,6 +44,7 @@
 #define WATCHDOG_NAME "w83697hf/hg WDT"
 #define PFX WATCHDOG_NAME ": "
 #define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
+#define WATCHDOG_EARLY_DISABLE 1	/* Disable until userland kicks in */
 
 static unsigned long wdt_is_open;
 static char expect_close;
@@ -56,12 +57,16 @@
 
 static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+static int early_disable = WATCHDOG_EARLY_DISABLE;
+module_param(early_disable, int, 0);
+MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
+
 /*
  *	Kernel methods.
  */
@@ -140,7 +145,7 @@
 	w83697hf_deselect_wdt();
 }
 
-static int
+static void
 wdt_ping(void)
 {
 	spin_lock(&io_lock);
@@ -150,10 +155,9 @@
 
 	w83697hf_deselect_wdt();
 	spin_unlock(&io_lock);
-	return 0;
 }
 
-static int
+static void
 wdt_enable(void)
 {
 	spin_lock(&io_lock);
@@ -164,10 +168,9 @@
 
 	w83697hf_deselect_wdt();
 	spin_unlock(&io_lock);
-	return 0;
 }
 
-static int
+static void
 wdt_disable(void)
 {
 	spin_lock(&io_lock);
@@ -178,7 +181,22 @@
 
 	w83697hf_deselect_wdt();
 	spin_unlock(&io_lock);
-	return 0;
+}
+
+static unsigned char
+wdt_running(void)
+{
+	unsigned char t;
+
+	spin_lock(&io_lock);
+	w83697hf_select_wdt();
+
+	t = w83697hf_get_reg(0xF4);	/* Read timer */
+
+	w83697hf_deselect_wdt();
+	spin_unlock(&io_lock);
+
+	return t;
 }
 
 static int
@@ -397,7 +415,11 @@
 	}
 
 	w83697hf_init();
-	wdt_disable();	/* Disable watchdog until first use */
+	if (early_disable) {
+		if (wdt_running())
+			printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+		wdt_disable();
+	}
 
 	if (wdt_set_heartbeat(timeout)) {
 		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 55e8ee1..3263084 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -42,7 +42,7 @@
 
 config BINFMT_FLAT
 	bool "Kernel support for flat binaries"
-	depends on !MMU
+	depends on !MMU && (!FRV || BROKEN)
 	help
 	  Support uClinux FLAT format binaries.
 
diff --git a/fs/afs/callback.c b/fs/afs/callback.c
index a78d5b2..587ef51 100644
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -8,7 +8,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
  *          David Howells <dhowells@redhat.com>
  *
  */
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 08db82e..bb47217 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -8,7 +8,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
  *          David Howells <dhowells@redhat.com>
  *
  */
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 4b572b8..7e3faee 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -10,7 +10,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Authors: David Howells <dhowells@redhat.com>
- *          David Woodhouse <dwmw2@redhat.com>
+ *          David Woodhouse <dwmw2@infradead.org>
  *
  */
 
diff --git a/fs/aio.c b/fs/aio.c
index b5253e7..0fb3117 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -591,10 +591,6 @@
 	atomic_inc(&mm->mm_count);
 	tsk->mm = mm;
 	tsk->active_mm = mm;
-	/*
-	 * Note that on UML this *requires* PF_BORROWED_MM to be set, otherwise
-	 * it won't work. Update it accordingly if you change it here
-	 */
 	switch_mm(active_mm, mm, tsk);
 	task_unlock(tsk);
 
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index ddd35d8..d051a32 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -390,7 +390,7 @@
 	}
 
 	/* expand the stack mapping to use up the entire allocation granule */
-	fullsize = ksize((char *) current->mm->start_brk);
+	fullsize = kobjsize((char *) current->mm->start_brk);
 	if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size,
 				    fullsize, 0, 0)))
 		stack_size = fullsize;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 3b40d45..2cb1acd 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -548,7 +548,7 @@
 			PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
 		/* Remap to use all availabe slack region space */
 		if (realdatastart && (realdatastart < (unsigned long)-4096)) {
-			reallen = ksize((void *)realdatastart);
+			reallen = kobjsize((void *)realdatastart);
 			if (reallen > len) {
 				realdatastart = do_mremap(realdatastart, len,
 					reallen, MREMAP_FIXED, realdatastart);
@@ -600,7 +600,7 @@
 			PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
 		/* Remap to use all availabe slack region space */
 		if (textpos && (textpos < (unsigned long) -4096)) {
-			reallen = ksize((void *)textpos);
+			reallen = kobjsize((void *)textpos);
 			if (reallen > len) {
 				textpos = do_mremap(textpos, len, reallen,
 					MREMAP_FIXED, textpos);
@@ -683,7 +683,7 @@
 		 */
 		current->mm->start_brk = datapos + data_len + bss_len;
 		current->mm->brk = (current->mm->start_brk + 3) & ~3;
-		current->mm->context.end_brk = memp + ksize((void *) memp) - stack_len;
+		current->mm->context.end_brk = memp + kobjsize((void *) memp) - stack_len;
 	}
 
 	if (flags & FLAT_FLAG_KTRACE)
@@ -790,7 +790,7 @@
 
 	/* zero the BSS,  BRK and stack areas */
 	memset((void*)(datapos + data_len), 0, bss_len + 
-			(memp + ksize((void *) memp) - stack_len -	/* end brk */
+			(memp + kobjsize((void *) memp) - stack_len -	/* end brk */
 			libinfo->lib_list[id].start_brk) +		/* start brk */
 			stack_len);
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 7d822fa..470c10c 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -12,6 +12,7 @@
 #include <linux/kmod.h>
 #include <linux/major.h>
 #include <linux/smp_lock.h>
+#include <linux/device_cgroup.h>
 #include <linux/highmem.h>
 #include <linux/blkdev.h>
 #include <linux/module.h>
@@ -928,9 +929,14 @@
 {
 	struct module *owner = NULL;
 	struct gendisk *disk;
-	int ret = -ENXIO;
+	int ret;
 	int part;
 
+	ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode);
+	if (ret != 0)
+		return ret;
+
+	ret = -ENXIO;
 	file->f_mapping = bdev->bd_inode->i_mapping;
 	lock_kernel();
 	disk = get_gendisk(bdev->bd_dev, &part);
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index cb52cbb..f58e41d 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -186,6 +186,11 @@
 			}
 		}
 	}
+
+	/* don't trust len bigger than ctx buffer */
+	if (*len > ctx->end - ctx->pointer)
+		return 0;
+
 	return 1;
 }
 
@@ -203,6 +208,10 @@
 	if (!asn1_length_decode(ctx, &def, &len))
 		return 0;
 
+	/* primitive shall be definite, indefinite shall be constructed */
+	if (*con == ASN1_PRI && !def)
+		return 0;
+
 	if (def)
 		*eoc = ctx->pointer + len;
 	else
@@ -389,6 +398,11 @@
 	unsigned long *optr;
 
 	size = eoc - ctx->pointer + 1;
+
+	/* first subid actually encodes first two subids */
+	if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+		return 0;
+
 	*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
 	if (*oid == NULL)
 		return 0;
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 6653e29..7013aaf 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -119,6 +119,9 @@
 	dp = description + strlen(description);
 	sprintf(dp, ";uid=0x%x", sesInfo->linux_uid);
 
+	dp = description + strlen(description);
+	sprintf(dp, ";user=%s", sesInfo->userName);
+
 	cFYI(1, ("key description = %s", description));
 	spnego_key = request_key(&cifs_spnego_key_type, description, "");
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 7b99384..fb655b4 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2159,8 +2159,7 @@
 		cFYI(1, ("Send error in copy = %d with %d files copied",
 			rc, le16_to_cpu(pSMBr->CopyCount)));
 	}
-	if (pSMB)
-		cifs_buf_release(pSMB);
+	cifs_buf_release(pSMB);
 
 	if (rc == -EAGAIN)
 		goto copyRetry;
@@ -2249,8 +2248,7 @@
 	if (rc)
 		cFYI(1, ("Send error in SetPathInfo create symlink = %d", rc));
 
-	if (pSMB)
-		cifs_buf_release(pSMB);
+	cifs_buf_release(pSMB);
 
 	if (rc == -EAGAIN)
 		goto createSymLinkRetry;
@@ -3929,9 +3927,9 @@
 	}
 
 	ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals);
-	if (ref->VersionNumber != 3) {
+	if (ref->VersionNumber != cpu_to_le16(3)) {
 		cERROR(1, ("Referrals of V%d version are not supported,"
-			"should be V3", ref->VersionNumber));
+			"should be V3", le16_to_cpu(ref->VersionNumber)));
 		rc = -EINVAL;
 		goto parse_DFS_referrals_exit;
 	}
@@ -3979,7 +3977,7 @@
 		if (rc)
 			goto parse_DFS_referrals_exit;
 
-		ref += ref->Size;
+		ref += le16_to_cpu(ref->Size);
 	}
 
 parse_DFS_referrals_exit:
@@ -4095,8 +4093,7 @@
 				 target_nodes, nls_codepage);
 
 GetDFSRefExit:
-	if (pSMB)
-		cifs_buf_release(pSMB);
+	cifs_buf_release(pSMB);
 
 	if (rc == -EAGAIN)
 		goto getDFSRetry;
@@ -5117,8 +5114,7 @@
 	if (rc)
 		cFYI(1, ("SetPathInfo (perms) returned %d", rc));
 
-	if (pSMB)
-		cifs_buf_release(pSMB);
+	cifs_buf_release(pSMB);
 	if (rc == -EAGAIN)
 		goto setPermsRetry;
 	return rc;
@@ -5340,8 +5336,7 @@
 			}
 		}
 	}
-	if (pSMB)
-		cifs_buf_release(pSMB);
+	cifs_buf_release(pSMB);
 	if (rc == -EAGAIN)
 		goto QAllEAsRetry;
 
@@ -5490,8 +5485,7 @@
 			}
 		}
 	}
-	if (pSMB)
-		cifs_buf_release(pSMB);
+	cifs_buf_release(pSMB);
 	if (rc == -EAGAIN)
 		goto QEARetry;
 
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 00ced97..129dbfe 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -172,7 +172,7 @@
 {
 	struct inode *pinode = NULL;
 
-	memset(pfnd_dat, sizeof(FILE_UNIX_BASIC_INFO), 0);
+	memset(pfnd_dat, 0, sizeof(FILE_UNIX_BASIC_INFO));
 
 /*	__le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
 	__le64 pfnd_dat->NumOfBytes = cpu_to_le64(0);
@@ -384,7 +384,7 @@
 static void fill_fake_finddata(FILE_ALL_INFO *pfnd_dat,
 			       struct super_block *sb)
 {
-	memset(pfnd_dat, sizeof(FILE_ALL_INFO), 0);
+	memset(pfnd_dat, 0, sizeof(FILE_ALL_INFO));
 
 /*	__le64 pfnd_dat->AllocationSize = cpu_to_le64(0);
 	__le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index cd62d75..e2832bc 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -1906,9 +1906,9 @@
 			goto out;
 		}
 	}
-	mutex_unlock(&key_tfm_list_mutex);
 	(*tfm) = key_tfm->key_tfm;
 	(*tfm_mutex) = &key_tfm->key_tfm_mutex;
 out:
+	mutex_unlock(&key_tfm_list_mutex);
 	return rc;
 }
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 951ee33..c15c257 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -660,8 +660,6 @@
 int ecryptfs_keyring_auth_tok_for_sig(struct key **auth_tok_key,
 				      struct ecryptfs_auth_tok **auth_tok,
 				      char *sig);
-int ecryptfs_write_zeros(struct file *file, pgoff_t index, int start,
-			 int num_zeros);
 int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
 			 loff_t offset, size_t size);
 int ecryptfs_write_lower_page_segment(struct inode *ecryptfs_inode,
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index ebf5515..75c2ea9 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -157,20 +157,6 @@
 			       ecryptfs_page_idx, rc);
 			goto out;
 		}
-		if (start_offset_in_page) {
-			/* Read in the page from the lower
-			 * into the eCryptfs inode page cache,
-			 * decrypting */
-			rc = ecryptfs_decrypt_page(ecryptfs_page);
-			if (rc) {
-				printk(KERN_ERR "%s: Error decrypting "
-				       "page; rc = [%d]\n",
-				       __func__, rc);
-				ClearPageUptodate(ecryptfs_page);
-				page_cache_release(ecryptfs_page);
-				goto out;
-			}
-		}
 		ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
 
 		/*
@@ -349,14 +335,6 @@
 			       ecryptfs_page_idx, rc);
 			goto out;
 		}
-		rc = ecryptfs_decrypt_page(ecryptfs_page);
-		if (rc) {
-			printk(KERN_ERR "%s: Error decrypting "
-			       "page; rc = [%d]\n", __func__, rc);
-			ClearPageUptodate(ecryptfs_page);
-			page_cache_release(ecryptfs_page);
-			goto out;
-		}
 		ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
 		memcpy((data + data_offset),
 		       ((char *)ecryptfs_page_virt + start_offset_in_page),
diff --git a/fs/exec.c b/fs/exec.c
index 3c2ba7c..9448f1b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -860,6 +860,7 @@
 
 no_thread_group:
 	exit_itimers(sig);
+	flush_itimer_signals();
 	if (leader)
 		release_task(leader);
 
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 28cfd0b..77278e9 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -580,7 +580,8 @@
 	}
 
 	blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count;
-	data = (__le32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count;
+	data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count %
+					 EXT3_ADDR_PER_BLOCK(sb));
 	end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb);
 
 	/* Get each reserved primary GDT block and verify it holds backups */
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 30494c5..9cc80b9 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -43,6 +43,46 @@
 
 }
 
+static int ext4_block_in_group(struct super_block *sb, ext4_fsblk_t block,
+			ext4_group_t block_group)
+{
+	ext4_group_t actual_group;
+	ext4_get_group_no_and_offset(sb, block, &actual_group, 0);
+	if (actual_group == block_group)
+		return 1;
+	return 0;
+}
+
+static int ext4_group_used_meta_blocks(struct super_block *sb,
+				ext4_group_t block_group)
+{
+	ext4_fsblk_t tmp;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
+	/* block bitmap, inode bitmap, and inode table blocks */
+	int used_blocks = sbi->s_itb_per_group + 2;
+
+	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+		struct ext4_group_desc *gdp;
+		struct buffer_head *bh;
+
+		gdp = ext4_get_group_desc(sb, block_group, &bh);
+		if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp),
+					block_group))
+			used_blocks--;
+
+		if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp),
+					block_group))
+			used_blocks--;
+
+		tmp = ext4_inode_table(sb, gdp);
+		for (; tmp < ext4_inode_table(sb, gdp) +
+				sbi->s_itb_per_group; tmp++) {
+			if (!ext4_block_in_group(sb, tmp, block_group))
+				used_blocks -= 1;
+		}
+	}
+	return used_blocks;
+}
 /* Initializes an uninitialized block bitmap if given, and returns the
  * number of blocks free in the group. */
 unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
@@ -105,20 +145,34 @@
 	free_blocks = group_blocks - bit_max;
 
 	if (bh) {
-		ext4_fsblk_t start;
+		ext4_fsblk_t start, tmp;
+		int flex_bg = 0;
 
 		for (bit = 0; bit < bit_max; bit++)
 			ext4_set_bit(bit, bh->b_data);
 
 		start = ext4_group_first_block_no(sb, block_group);
 
-		/* Set bits for block and inode bitmaps, and inode table */
-		ext4_set_bit(ext4_block_bitmap(sb, gdp) - start, bh->b_data);
-		ext4_set_bit(ext4_inode_bitmap(sb, gdp) - start, bh->b_data);
-		for (bit = (ext4_inode_table(sb, gdp) - start),
-		     bit_max = bit + sbi->s_itb_per_group; bit < bit_max; bit++)
-			ext4_set_bit(bit, bh->b_data);
+		if (EXT4_HAS_INCOMPAT_FEATURE(sb,
+					      EXT4_FEATURE_INCOMPAT_FLEX_BG))
+			flex_bg = 1;
 
+		/* Set bits for block and inode bitmaps, and inode table */
+		tmp = ext4_block_bitmap(sb, gdp);
+		if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+			ext4_set_bit(tmp - start, bh->b_data);
+
+		tmp = ext4_inode_bitmap(sb, gdp);
+		if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+			ext4_set_bit(tmp - start, bh->b_data);
+
+		tmp = ext4_inode_table(sb, gdp);
+		for (; tmp < ext4_inode_table(sb, gdp) +
+				sbi->s_itb_per_group; tmp++) {
+			if (!flex_bg ||
+				ext4_block_in_group(sb, tmp, block_group))
+				ext4_set_bit(tmp - start, bh->b_data);
+		}
 		/*
 		 * Also if the number of blocks within the group is
 		 * less than the blocksize * 8 ( which is the size
@@ -126,8 +180,7 @@
 		 */
 		mark_bitmap_end(group_blocks, sb->s_blocksize * 8, bh->b_data);
 	}
-
-	return free_blocks - sbi->s_itb_per_group - 2;
+	return free_blocks - ext4_group_used_meta_blocks(sb, block_group);
 }
 
 
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 873ad9b..c9900aa 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2745,8 +2745,6 @@
 	sbi = EXT4_SB(sb);
 	es = sbi->s_es;
 
-	ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
-			gdp->bg_free_blocks_count);
 
 	err = -EIO;
 	bitmap_bh = read_block_bitmap(sb, ac->ac_b_ex.fe_group);
@@ -2762,6 +2760,9 @@
 	if (!gdp)
 		goto out_err;
 
+	ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
+			gdp->bg_free_blocks_count);
+
 	err = ext4_journal_get_write_access(handle, gdp_bh);
 	if (err)
 		goto out_err;
@@ -3094,8 +3095,7 @@
 static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
 				struct ext4_prealloc_space *pa)
 {
-	unsigned len = ac->ac_o_ex.fe_len;
-
+	unsigned int len = ac->ac_o_ex.fe_len;
 	ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart,
 					&ac->ac_b_ex.fe_group,
 					&ac->ac_b_ex.fe_start);
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 9f086a6..9ecb92f 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -563,7 +563,8 @@
 	}
 
 	blk = EXT4_SB(sb)->s_sbh->b_blocknr + 1 + EXT4_SB(sb)->s_gdb_count;
-	data = (__le32 *)dind->b_data + EXT4_SB(sb)->s_gdb_count;
+	data = (__le32 *)dind->b_data + (EXT4_SB(sb)->s_gdb_count %
+					 EXT4_ADDR_PER_BLOCK(sb));
 	end = (__le32 *)dind->b_data + EXT4_ADDR_PER_BLOCK(sb);
 
 	/* Get each reserved primary GDT block and verify it holds backups */
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 09d9359..cb96f127c 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -671,6 +671,7 @@
 	unsigned long def_mount_opts;
 	struct super_block *sb = vfs->mnt_sb;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
+	journal_t *journal = sbi->s_journal;
 	struct ext4_super_block *es = sbi->s_es;
 
 	def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
@@ -729,8 +730,15 @@
 		seq_printf(seq, ",commit=%u",
 			   (unsigned) (sbi->s_commit_interval / HZ));
 	}
-	if (test_opt(sb, BARRIER))
-		seq_puts(seq, ",barrier=1");
+	/*
+	 * We're changing the default of barrier mount option, so
+	 * let's always display its mount state so it's clear what its
+	 * status is.
+	 */
+	seq_puts(seq, ",barrier=");
+	seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
+	if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
+		seq_puts(seq, ",journal_async_commit");
 	if (test_opt(sb, NOBH))
 		seq_puts(seq, ",nobh");
 	if (!test_opt(sb, EXTENTS))
@@ -1907,6 +1915,7 @@
 	sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
 
 	set_opt(sbi->s_mount_opt, RESERVATION);
+	set_opt(sbi->s_mount_opt, BARRIER);
 
 	/*
 	 * turn on extents feature by default in ext4 filesystem
@@ -2189,6 +2198,29 @@
 	    EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
 		if (ext4_load_journal(sb, es, journal_devnum))
 			goto failed_mount3;
+		if (!(sb->s_flags & MS_RDONLY) &&
+		    EXT4_SB(sb)->s_journal->j_failed_commit) {
+			printk(KERN_CRIT "EXT4-fs error (device %s): "
+			       "ext4_fill_super: Journal transaction "
+			       "%u is corrupt\n", sb->s_id, 
+			       EXT4_SB(sb)->s_journal->j_failed_commit);
+			if (test_opt (sb, ERRORS_RO)) {
+				printk (KERN_CRIT
+					"Mounting filesystem read-only\n");
+				sb->s_flags |= MS_RDONLY;
+				EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+				es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+			}
+			if (test_opt(sb, ERRORS_PANIC)) {
+				EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+				es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+				ext4_commit_super(sb, es, 1);
+				printk(KERN_CRIT
+				       "EXT4-fs (device %s): mount failed\n",
+				      sb->s_id);
+				goto failed_mount4;
+			}
+		}
 	} else if (journal_inum) {
 		if (ext4_create_journal(sb, es, journal_inum))
 			goto failed_mount3;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index fb77e09..43e9951 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -488,7 +488,12 @@
 		err = bdi_init(&fc->bdi);
 		if (err)
 			goto error_kfree;
-		err = bdi_register_dev(&fc->bdi, fc->dev);
+		if (sb->s_bdev) {
+			err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
+					   MAJOR(fc->dev), MINOR(fc->dev));
+		} else {
+			err = bdi_register_dev(&fc->bdi, fc->dev);
+		}
 		if (err)
 			goto error_bdi_destroy;
 		/*
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 4d99685..a2ed72f 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -168,6 +168,7 @@
 		spin_unlock(&journal->j_state_lock);
 
 		/* And try again, without the barrier */
+		lock_buffer(bh);
 		set_buffer_uptodate(bh);
 		set_buffer_dirty(bh);
 		ret = submit_bh(WRITE, bh);
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 5d0405a..058f50f 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -344,6 +344,7 @@
 			*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
 				     obh->b_size);
 		}
+		put_bh(obh);
 	}
 	return 0;
 }
@@ -610,9 +611,8 @@
 				chksum_err = chksum_seen = 0;
 
 				if (info->end_transaction) {
-					printk(KERN_ERR "JBD: Transaction %u "
-						"found to be corrupt.\n",
-						next_commit_ID - 1);
+					journal->j_failed_commit =
+						info->end_transaction;
 					brelse(bh);
 					break;
 				}
@@ -643,10 +643,8 @@
 
 					if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
 					   JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
-						printk(KERN_ERR
-						       "JBD: Transaction %u "
-						       "found to be corrupt.\n",
-						       next_commit_ID);
+						journal->j_failed_commit =
+							next_commit_ID;
 						brelse(bh);
 						break;
 					}
diff --git a/fs/libfs.c b/fs/libfs.c
index b004dfa..892d41c 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -528,6 +528,23 @@
 	return count;
 }
 
+ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+				const void *from, size_t available)
+{
+	loff_t pos = *ppos;
+
+	if (pos < 0)
+		return -EINVAL;
+	if (pos >= available)
+		return 0;
+	if (count > available - pos)
+		count = available - pos;
+	memcpy(to, from + pos, count);
+	*ppos = pos + count;
+
+	return count;
+}
+
 /*
  * Transaction based IO.
  * The file expects a single write which triggers the transaction, and then
@@ -800,6 +817,7 @@
 EXPORT_SYMBOL(simple_sync_file);
 EXPORT_SYMBOL(simple_unlink);
 EXPORT_SYMBOL(simple_read_from_buffer);
+EXPORT_SYMBOL(memory_read_from_buffer);
 EXPORT_SYMBOL(simple_transaction_get);
 EXPORT_SYMBOL(simple_transaction_read);
 EXPORT_SYMBOL(simple_transaction_release);
diff --git a/fs/ntfs/upcase.c b/fs/ntfs/upcase.c
index 9101807..e2f72ca 100644
--- a/fs/ntfs/upcase.c
+++ b/fs/ntfs/upcase.c
@@ -77,11 +77,10 @@
 		uc[i] = cpu_to_le16(i);
 	for (r = 0; uc_run_table[r][0]; r++)
 		for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++)
-			uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) +
-					uc_run_table[r][2]);
+			le16_add_cpu(&uc[i], uc_run_table[r][2]);
 	for (r = 0; uc_dup_table[r][0]; r++)
 		for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2)
-			uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1);
+			le16_add_cpu(&uc[i + 1], -1);
 	for (r = 0; uc_word_table[r][0]; r++)
 		uc[uc_word_table[r][0]] = cpu_to_le16(uc_word_table[r][1]);
 	return uc;
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 1e44ad1..a27d615 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -142,53 +142,43 @@
 static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
 static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
 
-static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-			   u32 msgkey, struct task_struct *task, u8 node)
-{
 #ifdef CONFIG_DEBUG_FS
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+		    u32 msgkey, struct task_struct *task, u8 node)
+{
 	INIT_LIST_HEAD(&nst->st_net_debug_item);
 	nst->st_task = task;
 	nst->st_msg_type = msgtype;
 	nst->st_msg_key = msgkey;
 	nst->st_node = node;
-#endif
 }
 
-static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
 {
-#ifdef CONFIG_DEBUG_FS
 	do_gettimeofday(&nst->st_sock_time);
-#endif
 }
 
-static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
 {
-#ifdef CONFIG_DEBUG_FS
 	do_gettimeofday(&nst->st_send_time);
-#endif
 }
 
-static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
 {
-#ifdef CONFIG_DEBUG_FS
 	do_gettimeofday(&nst->st_status_time);
-#endif
 }
 
-static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
 					 struct o2net_sock_container *sc)
 {
-#ifdef CONFIG_DEBUG_FS
 	nst->st_sc = sc;
-#endif
 }
 
-static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
 {
-#ifdef CONFIG_DEBUG_FS
 	nst->st_id = msg_id;
-#endif
 }
+#endif /* CONFIG_DEBUG_FS */
 
 static inline int o2net_reconnect_delay(void)
 {
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index a705d5d..fd6179e 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -128,23 +128,23 @@
 void o2net_debug_add_sc(struct o2net_sock_container *sc);
 void o2net_debug_del_sc(struct o2net_sock_container *sc);
 #else
-static int o2net_debugfs_init(void)
+static inline int o2net_debugfs_init(void)
 {
 	return 0;
 }
-static void o2net_debugfs_exit(void)
+static inline void o2net_debugfs_exit(void)
 {
 }
-static void o2net_debug_add_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_add_nst(struct o2net_send_tracking *nst)
 {
 }
-static void o2net_debug_del_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_del_nst(struct o2net_send_tracking *nst)
 {
 }
-static void o2net_debug_add_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_add_sc(struct o2net_sock_container *sc)
 {
 }
-static void o2net_debug_del_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_del_sc(struct o2net_sock_container *sc)
 {
 }
 #endif	/* CONFIG_DEBUG_FS */
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 8d58cfe..18307ff 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -224,10 +224,42 @@
 	struct timeval			st_send_time;
 	struct timeval			st_status_time;
 };
+
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+		    u32 msgkey, struct task_struct *task, u8 node);
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+				  struct o2net_sock_container *sc);
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
+
 #else
 struct o2net_send_tracking {
 	u32	dummy;
 };
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+				  u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+						struct o2net_sock_container *sc)
+{
+}
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+					u32 msg_id)
+{
+}
 #endif	/* CONFIG_DEBUG_FS */
 
 #endif /* O2CLUSTER_TCP_INTERNAL_H */
diff --git a/fs/ocfs2/dlm/dlmdebug.h b/fs/ocfs2/dlm/dlmdebug.h
index d34a62a..8c686d2 100644
--- a/fs/ocfs2/dlm/dlmdebug.h
+++ b/fs/ocfs2/dlm/dlmdebug.h
@@ -60,25 +60,25 @@
 
 #else
 
-static int dlm_debug_init(struct dlm_ctxt *dlm)
+static inline int dlm_debug_init(struct dlm_ctxt *dlm)
 {
 	return 0;
 }
-static void dlm_debug_shutdown(struct dlm_ctxt *dlm)
+static inline void dlm_debug_shutdown(struct dlm_ctxt *dlm)
 {
 }
-static int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
 {
 	return 0;
 }
-static void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
 {
 }
-static int dlm_create_debugfs_root(void)
+static inline int dlm_create_debugfs_root(void)
 {
 	return 0;
 }
-static void dlm_destroy_debugfs_root(void)
+static inline void dlm_destroy_debugfs_root(void)
 {
 }
 
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index b503772..6b97d11 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -61,7 +61,7 @@
  * negotiated by the client.  The client negotiates based on the maximum
  * version advertised in /sys/fs/ocfs2/max_locking_protocol.  The major
  * number from the "SETV" message must match
- * user_stack.sp_proto->lp_max_version.pv_major, and the minor number
+ * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number
  * must be less than or equal to ...->lp_max_version.pv_minor.
  *
  * Once this information has been set, mounts will be allowed.  From this
@@ -153,7 +153,7 @@
 	struct ocfs2_control_message_down	u_down;
 };
 
-static struct ocfs2_stack_plugin user_stack;
+static struct ocfs2_stack_plugin ocfs2_user_plugin;
 
 static atomic_t ocfs2_control_opened;
 static int ocfs2_control_this_node = -1;
@@ -399,7 +399,7 @@
 	char *ptr = NULL;
 	struct ocfs2_control_private *p = file->private_data;
 	struct ocfs2_protocol_version *max =
-		&user_stack.sp_proto->lp_max_version;
+		&ocfs2_user_plugin.sp_proto->lp_max_version;
 
 	if (ocfs2_control_get_handshake_state(file) !=
 	    OCFS2_CONTROL_HANDSHAKE_PROTOCOL)
@@ -680,7 +680,7 @@
 	struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg);
 	int status = lksb->sb_status;
 
-	BUG_ON(user_stack.sp_proto == NULL);
+	BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
 
 	/*
 	 * For now we're punting on the issue of other non-standard errors
@@ -693,16 +693,16 @@
 	 */
 
 	if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL)
-		user_stack.sp_proto->lp_unlock_ast(astarg, 0);
+		ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0);
 	else
-		user_stack.sp_proto->lp_lock_ast(astarg);
+		ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg);
 }
 
 static void fsdlm_blocking_ast_wrapper(void *astarg, int level)
 {
-	BUG_ON(user_stack.sp_proto == NULL);
+	BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
 
-	user_stack.sp_proto->lp_blocking_ast(astarg, level);
+	ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level);
 }
 
 static int user_dlm_lock(struct ocfs2_cluster_connection *conn,
@@ -838,7 +838,7 @@
 	return 0;
 }
 
-static struct ocfs2_stack_operations user_stack_ops = {
+static struct ocfs2_stack_operations ocfs2_user_plugin_ops = {
 	.connect	= user_cluster_connect,
 	.disconnect	= user_cluster_disconnect,
 	.this_node	= user_cluster_this_node,
@@ -849,20 +849,20 @@
 	.dump_lksb	= user_dlm_dump_lksb,
 };
 
-static struct ocfs2_stack_plugin user_stack = {
+static struct ocfs2_stack_plugin ocfs2_user_plugin = {
 	.sp_name	= "user",
-	.sp_ops		= &user_stack_ops,
+	.sp_ops		= &ocfs2_user_plugin_ops,
 	.sp_owner	= THIS_MODULE,
 };
 
 
-static int __init user_stack_init(void)
+static int __init ocfs2_user_plugin_init(void)
 {
 	int rc;
 
 	rc = ocfs2_control_init();
 	if (!rc) {
-		rc = ocfs2_stack_glue_register(&user_stack);
+		rc = ocfs2_stack_glue_register(&ocfs2_user_plugin);
 		if (rc)
 			ocfs2_control_exit();
 	}
@@ -870,14 +870,14 @@
 	return rc;
 }
 
-static void __exit user_stack_exit(void)
+static void __exit ocfs2_user_plugin_exit(void)
 {
-	ocfs2_stack_glue_unregister(&user_stack);
+	ocfs2_stack_glue_unregister(&ocfs2_user_plugin);
 	ocfs2_control_exit();
 }
 
 MODULE_AUTHOR("Oracle");
 MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks");
 MODULE_LICENSE("GPL");
-module_init(user_stack_init);
-module_exit(user_stack_exit);
+module_init(ocfs2_user_plugin_init);
+module_exit(ocfs2_user_plugin_exit);
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 9e3b8c3..797d775 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -288,7 +288,7 @@
 	seq_printf(m, "%s", header);
 	CAP_FOR_EACH_U32(__capi) {
 		seq_printf(m, "%08x",
-			   a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]);
+			   a->cap[(_KERNEL_CAPABILITY_U32S-1) - __capi]);
 	}
 	seq_printf(m, "\n");
 }
diff --git a/fs/proc/base.c b/fs/proc/base.c
index c447e07..3b45537 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -127,6 +127,25 @@
 		NULL, &proc_single_file_operations,	\
 		{ .proc_show = &proc_##OTYPE } )
 
+/*
+ * Count the number of hardlinks for the pid_entry table, excluding the .
+ * and .. links.
+ */
+static unsigned int pid_entry_count_dirs(const struct pid_entry *entries,
+	unsigned int n)
+{
+	unsigned int i;
+	unsigned int count;
+
+	count = 0;
+	for (i = 0; i < n; ++i) {
+		if (S_ISDIR(entries[i].mode))
+			++count;
+	}
+
+	return count;
+}
+
 int maps_protect;
 EXPORT_SYMBOL(maps_protect);
 
@@ -2585,10 +2604,9 @@
 	inode->i_op = &proc_tgid_base_inode_operations;
 	inode->i_fop = &proc_tgid_base_operations;
 	inode->i_flags|=S_IMMUTABLE;
-	inode->i_nlink = 5;
-#ifdef CONFIG_SECURITY
-	inode->i_nlink += 1;
-#endif
+
+	inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff,
+		ARRAY_SIZE(tgid_base_stuff));
 
 	dentry->d_op = &pid_dentry_operations;
 
@@ -2816,10 +2834,9 @@
 	inode->i_op = &proc_tid_base_inode_operations;
 	inode->i_fop = &proc_tid_base_operations;
 	inode->i_flags|=S_IMMUTABLE;
-	inode->i_nlink = 4;
-#ifdef CONFIG_SECURITY
-	inode->i_nlink += 1;
-#endif
+
+	inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff,
+		ARRAY_SIZE(tid_base_stuff));
 
 	dentry->d_op = &pid_dentry_operations;
 
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 6f4e8dc..b08d100 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -425,7 +425,8 @@
 			}
 		}
 		unlock_new_inode(inode);
-	}
+	} else
+	       module_put(de->owner);
 	return inode;
 
 out_ino:
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 74a323d..7e277f2 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -139,7 +139,7 @@
 #define K(x) ((x) << (PAGE_SHIFT - 10))
 	si_meminfo(&i);
 	si_swapinfo(&i);
-	committed = atomic_read(&vm_committed_space);
+	committed = atomic_long_read(&vm_committed_space);
 	allowed = ((totalram_pages - hugetlb_total_pages())
 		* sysctl_overcommit_ratio / 100) + total_swap_pages;
 
@@ -716,7 +716,7 @@
 	pfn = src / KPMSIZE;
 	count = min_t(size_t, count, (max_pfn * KPMSIZE) - src);
 	if (src & KPMMASK || count & KPMMASK)
-		return -EIO;
+		return -EINVAL;
 
 	while (count > 0) {
 		ppage = NULL;
@@ -726,7 +726,7 @@
 		if (!ppage)
 			pcount = 0;
 		else
-			pcount = atomic_read(&ppage->_count);
+			pcount = page_mapcount(ppage);
 
 		if (put_user(pcount, out++)) {
 			ret = -EFAULT;
@@ -782,7 +782,7 @@
 	pfn = src / KPMSIZE;
 	count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
 	if (src & KPMMASK || count & KPMMASK)
-		return -EIO;
+		return -EINVAL;
 
 	while (count > 0) {
 		ppage = NULL;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 88717c0..1740362 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -496,7 +496,7 @@
 };
 
 struct pagemapread {
-	char __user *out, *end;
+	u64 __user *out, *end;
 };
 
 #define PM_ENTRY_BYTES      sizeof(u64)
@@ -519,21 +519,11 @@
 static int add_to_pagemap(unsigned long addr, u64 pfn,
 			  struct pagemapread *pm)
 {
-	/*
-	 * Make sure there's room in the buffer for an
-	 * entire entry.  Otherwise, only copy part of
-	 * the pfn.
-	 */
-	if (pm->out + PM_ENTRY_BYTES >= pm->end) {
-		if (copy_to_user(pm->out, &pfn, pm->end - pm->out))
-			return -EFAULT;
-		pm->out = pm->end;
-		return PM_END_OF_BUFFER;
-	}
-
 	if (put_user(pfn, pm->out))
 		return -EFAULT;
-	pm->out += PM_ENTRY_BYTES;
+	pm->out++;
+	if (pm->out >= pm->end)
+		return PM_END_OF_BUFFER;
 	return 0;
 }
 
@@ -634,7 +624,7 @@
 
 	ret = -EINVAL;
 	/* file position must be aligned */
-	if (*ppos % PM_ENTRY_BYTES)
+	if ((*ppos % PM_ENTRY_BYTES) || (count % PM_ENTRY_BYTES))
 		goto out_task;
 
 	ret = 0;
@@ -664,8 +654,8 @@
 		goto out_pages;
 	}
 
-	pm.out = buf;
-	pm.end = buf + count;
+	pm.out = (u64 *)buf;
+	pm.end = (u64 *)(buf + count);
 
 	if (!ptrace_may_attach(task)) {
 		ret = -EIO;
@@ -690,9 +680,9 @@
 		if (ret == PM_END_OF_BUFFER)
 			ret = 0;
 		/* don't need mmap_sem for these, but this looks cleaner */
-		*ppos += pm.out - buf;
+		*ppos += (char *)pm.out - buf;
 		if (!ret)
-			ret = pm.out - buf;
+			ret = (char *)pm.out - buf;
 	}
 
 out_pages:
diff --git a/fs/splice.c b/fs/splice.c
index 7815003..aa5f6f6 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -58,8 +58,8 @@
 		 */
 		wait_on_page_writeback(page);
 
-		if (PagePrivate(page))
-			try_to_release_page(page, GFP_KERNEL);
+		if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL))
+			goto out_unlock;
 
 		/*
 		 * If we succeeded in removing the mapping, set LRU flag
@@ -75,6 +75,7 @@
 	 * Raced with truncate or failed to remove page from current
 	 * address space, unlock and return failure.
 	 */
+out_unlock:
 	unlock_page(page);
 	return 1;
 }
@@ -983,7 +984,7 @@
 
 	while (len) {
 		size_t read_len;
-		loff_t pos = sd->pos;
+		loff_t pos = sd->pos, prev_pos = pos;
 
 		ret = do_splice_to(in, &pos, pipe, len, flags);
 		if (unlikely(ret <= 0))
@@ -998,15 +999,19 @@
 		 * could get stuck data in the internal pipe:
 		 */
 		ret = actor(pipe, sd);
-		if (unlikely(ret <= 0))
+		if (unlikely(ret <= 0)) {
+			sd->pos = prev_pos;
 			goto out_release;
+		}
 
 		bytes += ret;
 		len -= ret;
 		sd->pos = pos;
 
-		if (ret < read_len)
+		if (ret < read_len) {
+			sd->pos = prev_pos + ret;
 			goto out_release;
+		}
 	}
 
 done:
@@ -1072,7 +1077,7 @@
 
 	ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
 	if (ret > 0)
-		*ppos += ret;
+		*ppos = sd.pos;
 
 	return ret;
 }
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 5105015..98e0e86 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -387,6 +387,8 @@
 		if (unlikely(page == NULL)) {
 			if (flags & XBF_READ_AHEAD) {
 				bp->b_page_count = i;
+				for (i = 0; i < bp->b_page_count; i++)
+					unlock_page(bp->b_pages[i]);
 				return -ENOMEM;
 			}
 
@@ -416,17 +418,24 @@
 		ASSERT(!PagePrivate(page));
 		if (!PageUptodate(page)) {
 			page_count--;
-			if (blocksize < PAGE_CACHE_SIZE && !PagePrivate(page)) {
+			if (blocksize >= PAGE_CACHE_SIZE) {
+				if (flags & XBF_READ)
+					bp->b_flags |= _XBF_PAGE_LOCKED;
+			} else if (!PagePrivate(page)) {
 				if (test_page_region(page, offset, nbytes))
 					page_count++;
 			}
 		}
 
-		unlock_page(page);
 		bp->b_pages[i] = page;
 		offset = 0;
 	}
 
+	if (!(bp->b_flags & _XBF_PAGE_LOCKED)) {
+		for (i = 0; i < bp->b_page_count; i++)
+			unlock_page(bp->b_pages[i]);
+	}
+
 	if (page_count == bp->b_page_count)
 		bp->b_flags |= XBF_DONE;
 
@@ -746,6 +755,7 @@
 	bp->b_count_desired = len;
 	bp->b_buffer_length = buflen;
 	bp->b_flags |= XBF_MAPPED;
+	bp->b_flags &= ~_XBF_PAGE_LOCKED;
 
 	return 0;
 }
@@ -1093,8 +1103,10 @@
 	xfs_buf_t		*bp,
 	int			schedule)
 {
-	if (atomic_dec_and_test(&bp->b_io_remaining) == 1)
+	if (atomic_dec_and_test(&bp->b_io_remaining) == 1) {
+		bp->b_flags &= ~_XBF_PAGE_LOCKED;
 		xfs_buf_ioend(bp, schedule);
+	}
 }
 
 STATIC void
@@ -1125,6 +1137,9 @@
 
 		if (--bvec >= bio->bi_io_vec)
 			prefetchw(&bvec->bv_page->flags);
+
+		if (bp->b_flags & _XBF_PAGE_LOCKED)
+			unlock_page(page);
 	} while (bvec >= bio->bi_io_vec);
 
 	_xfs_buf_ioend(bp, 1);
@@ -1163,7 +1178,8 @@
 	 * filesystem block size is not smaller than the page size.
 	 */
 	if ((bp->b_buffer_length < PAGE_CACHE_SIZE) &&
-	    (bp->b_flags & XBF_READ) &&
+	    ((bp->b_flags & (XBF_READ|_XBF_PAGE_LOCKED)) ==
+	      (XBF_READ|_XBF_PAGE_LOCKED)) &&
 	    (blocksize >= PAGE_CACHE_SIZE)) {
 		bio = bio_alloc(GFP_NOIO, 1);
 
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 841d788..f948ec7 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -66,6 +66,25 @@
 	_XBF_PAGES = (1 << 18),	    /* backed by refcounted pages	   */
 	_XBF_RUN_QUEUES = (1 << 19),/* run block device task queue	   */
 	_XBF_DELWRI_Q = (1 << 21),   /* buffer on delwri queue		   */
+
+	/*
+	 * Special flag for supporting metadata blocks smaller than a FSB.
+	 *
+	 * In this case we can have multiple xfs_buf_t on a single page and
+	 * need to lock out concurrent xfs_buf_t readers as they only
+	 * serialise access to the buffer.
+	 *
+	 * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
+	 * between reads of the page. Hence we can have one thread read the
+	 * page and modify it, but then race with another thread that thinks
+	 * the page is not up-to-date and hence reads it again.
+	 *
+	 * The result is that the first modifcation to the page is lost.
+	 * This sort of AGF/AGI reading race can happen when unlinking inodes
+	 * that require truncation and results in the AGI unlinked list
+	 * modifications being lost.
+	 */
+	_XBF_PAGE_LOCKED = (1 << 22),
 } xfs_buf_flags_t;
 
 typedef enum {
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 65e78c1..5f60363 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -184,19 +184,24 @@
 	return -xfs_release(XFS_I(inode));
 }
 
+/*
+ * We ignore the datasync flag here because a datasync is effectively
+ * identical to an fsync. That is, datasync implies that we need to write
+ * only the metadata needed to be able to access the data that is written
+ * if we crash after the call completes. Hence if we are writing beyond
+ * EOF we have to log the inode size change as well, which makes it a
+ * full fsync. If we don't write beyond EOF, the inode core will be
+ * clean in memory and so we don't need to log the inode, just like
+ * fsync.
+ */
 STATIC int
 xfs_file_fsync(
 	struct file	*filp,
 	struct dentry	*dentry,
 	int		datasync)
 {
-	int		flags = FSYNC_WAIT;
-
-	if (datasync)
-		flags |= FSYNC_DATA;
 	xfs_iflags_clear(XFS_I(dentry->d_inode), XFS_ITRUNCATED);
-	return -xfs_fsync(XFS_I(dentry->d_inode), flags,
-			(xfs_off_t)0, (xfs_off_t)-1);
+	return -xfs_fsync(XFS_I(dentry->d_inode));
 }
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h
index 9d73cb5..25eb2a9 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.h
+++ b/fs/xfs/linux-2.6/xfs_vnode.h
@@ -230,14 +230,6 @@
 #define ATTR_NOSIZETOK	0x400	/* Don't get the SIZE token */
 
 /*
- * Flags to vop_fsync/reclaim.
- */
-#define FSYNC_NOWAIT	0	/* asynchronous flush */
-#define FSYNC_WAIT	0x1	/* synchronous fsync or forced reclaim */
-#define FSYNC_INVAL	0x2	/* flush and invalidate cached data */
-#define FSYNC_DATA	0x4	/* synchronous fsync of data only */
-
-/*
  * Tracking vnode activity.
  */
 #if defined(XFS_INODE_TRACE)
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index cf0bb9c..e569bf5 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2974,6 +2974,7 @@
 	xfs_mount_t		*mp = ip->i_mount;
 	xfs_perag_t		*pag = xfs_get_perag(mp, ip->i_ino);
 	unsigned long		first_index, mask;
+	unsigned long		inodes_per_cluster;
 	int			ilist_size;
 	xfs_inode_t		**ilist;
 	xfs_inode_t		*iq;
@@ -2985,8 +2986,9 @@
 	ASSERT(pag->pagi_inodeok);
 	ASSERT(pag->pag_ici_init);
 
-	ilist_size = XFS_INODE_CLUSTER_SIZE(mp) * sizeof(xfs_inode_t *);
-	ilist = kmem_alloc(ilist_size, KM_MAYFAIL);
+	inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog;
+	ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *);
+	ilist = kmem_alloc(ilist_size, KM_MAYFAIL|KM_NOFS);
 	if (!ilist)
 		return 0;
 
@@ -2995,8 +2997,7 @@
 	read_lock(&pag->pag_ici_lock);
 	/* really need a gang lookup range call here */
 	nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void**)ilist,
-					first_index,
-					XFS_INODE_CLUSTER_SIZE(mp));
+					first_index, inodes_per_cluster);
 	if (nr_found == 0)
 		goto out_free;
 
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 70702a6..e475e37 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -856,18 +856,14 @@
 /*
  * xfs_fsync
  *
- * This is called to sync the inode and its data out to disk.
- * We need to hold the I/O lock while flushing the data, and
- * the inode lock while flushing the inode.  The inode lock CANNOT
- * be held while flushing the data, so acquire after we're done
- * with that.
+ * This is called to sync the inode and its data out to disk.  We need to hold
+ * the I/O lock while flushing the data, and the inode lock while flushing the
+ * inode.  The inode lock CANNOT be held while flushing the data, so acquire
+ * after we're done with that.
  */
 int
 xfs_fsync(
-	xfs_inode_t	*ip,
-	int		flag,
-	xfs_off_t	start,
-	xfs_off_t	stop)
+	xfs_inode_t	*ip)
 {
 	xfs_trans_t	*tp;
 	int		error;
@@ -875,103 +871,79 @@
 
 	xfs_itrace_entry(ip);
 
-	ASSERT(start >= 0 && stop >= -1);
-
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
 		return XFS_ERROR(EIO);
 
-	if (flag & FSYNC_DATA)
-		filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+	/* capture size updates in I/O completion before writing the inode. */
+	error = filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+	if (error)
+		return XFS_ERROR(error);
 
 	/*
-	 * We always need to make sure that the required inode state
-	 * is safe on disk.  The vnode might be clean but because
-	 * of committed transactions that haven't hit the disk yet.
-	 * Likewise, there could be unflushed non-transactional
-	 * changes to the inode core that have to go to disk.
+	 * We always need to make sure that the required inode state is safe on
+	 * disk.  The vnode might be clean but we still might need to force the
+	 * log because of committed transactions that haven't hit the disk yet.
+	 * Likewise, there could be unflushed non-transactional changes to the
+	 * inode core that have to go to disk and this requires us to issue
+	 * a synchronous transaction to capture these changes correctly.
 	 *
-	 * The following code depends on one assumption:  that
-	 * any transaction that changes an inode logs the core
-	 * because it has to change some field in the inode core
-	 * (typically nextents or nblocks).  That assumption
-	 * implies that any transactions against an inode will
-	 * catch any non-transactional updates.  If inode-altering
-	 * transactions exist that violate this assumption, the
-	 * code breaks.  Right now, it figures that if the involved
-	 * update_* field is clear and the inode is unpinned, the
-	 * inode is clean.  Either it's been flushed or it's been
-	 * committed and the commit has hit the disk unpinning the inode.
-	 * (Note that xfs_inode_item_format() called at commit clears
-	 * the update_* fields.)
+	 * This code relies on the assumption that if the update_* fields
+	 * of the inode are clear and the inode is unpinned then it is clean
+	 * and no action is required.
 	 */
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 
-	/* If we are flushing data then we care about update_size
-	 * being set, otherwise we care about update_core
-	 */
-	if ((flag & FSYNC_DATA) ?
-			(ip->i_update_size == 0) :
-			(ip->i_update_core == 0)) {
+	if (!(ip->i_update_size || ip->i_update_core)) {
 		/*
-		 * Timestamps/size haven't changed since last inode
-		 * flush or inode transaction commit.  That means
-		 * either nothing got written or a transaction
-		 * committed which caught the updates.	If the
-		 * latter happened and the transaction hasn't
-		 * hit the disk yet, the inode will be still
-		 * be pinned.  If it is, force the log.
+		 * Timestamps/size haven't changed since last inode flush or
+		 * inode transaction commit.  That means either nothing got
+		 * written or a transaction committed which caught the updates.
+		 * If the latter happened and the transaction hasn't hit the
+		 * disk yet, the inode will be still be pinned.  If it is,
+		 * force the log.
 		 */
 
 		xfs_iunlock(ip, XFS_ILOCK_SHARED);
 
 		if (xfs_ipincount(ip)) {
-			_xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
-				      XFS_LOG_FORCE |
-				      ((flag & FSYNC_WAIT)
-				       ? XFS_LOG_SYNC : 0),
+			error = _xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
+				      XFS_LOG_FORCE | XFS_LOG_SYNC,
 				      &log_flushed);
 		} else {
 			/*
-			 * If the inode is not pinned and nothing
-			 * has changed we don't need to flush the
-			 * cache.
+			 * If the inode is not pinned and nothing has changed
+			 * we don't need to flush the cache.
 			 */
 			changed = 0;
 		}
-		error = 0;
 	} else	{
 		/*
-		 * Kick off a transaction to log the inode
-		 * core to get the updates.  Make it
-		 * sync if FSYNC_WAIT is passed in (which
-		 * is done by everybody but specfs).  The
-		 * sync transaction will also force the log.
+		 * Kick off a transaction to log the inode core to get the
+		 * updates.  The sync transaction will also force the log.
 		 */
 		xfs_iunlock(ip, XFS_ILOCK_SHARED);
 		tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS);
-		if ((error = xfs_trans_reserve(tp, 0,
-				XFS_FSYNC_TS_LOG_RES(ip->i_mount),
-				0, 0, 0)))  {
+		error = xfs_trans_reserve(tp, 0,
+				XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0);
+		if (error) {
 			xfs_trans_cancel(tp, 0);
 			return error;
 		}
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
 
 		/*
-		 * Note - it's possible that we might have pushed
-		 * ourselves out of the way during trans_reserve
-		 * which would flush the inode.	 But there's no
-		 * guarantee that the inode buffer has actually
-		 * gone out yet (it's delwri).	Plus the buffer
-		 * could be pinned anyway if it's part of an
-		 * inode in another recent transaction.	 So we
-		 * play it safe and fire off the transaction anyway.
+		 * Note - it's possible that we might have pushed ourselves out
+		 * of the way during trans_reserve which would flush the inode.
+		 * But there's no guarantee that the inode buffer has actually
+		 * gone out yet (it's delwri).	Plus the buffer could be pinned
+		 * anyway if it's part of an inode in another recent
+		 * transaction.	 So we play it safe and fire off the
+		 * transaction anyway.
 		 */
 		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 		xfs_trans_ihold(tp, ip);
 		xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-		if (flag & FSYNC_WAIT)
-			xfs_trans_set_sync(tp);
+		xfs_trans_set_sync(tp);
 		error = _xfs_trans_commit(tp, 0, &log_flushed);
 
 		xfs_iunlock(ip, XFS_ILOCK_EXCL);
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 8abe8f1..57335ba 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -18,8 +18,7 @@
 int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags,
 		struct cred *credp);
 int xfs_readlink(struct xfs_inode *ip, char *link);
-int xfs_fsync(struct xfs_inode *ip, int flag, xfs_off_t start,
-		xfs_off_t stop);
+int xfs_fsync(struct xfs_inode *ip);
 int xfs_release(struct xfs_inode *ip);
 int xfs_inactive(struct xfs_inode *ip);
 int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name,
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
index 80073fd..f8beaa2 100644
--- a/include/asm-arm/arch-at91/io.h
+++ b/include/asm-arm/arch-at91/io.h
@@ -21,8 +21,6 @@
 #ifndef __ASM_ARCH_IO_H
 #define __ASM_ARCH_IO_H
 
-#include <asm/io.h>
-
 #define IO_SPACE_LIMIT		0xFFFFFFFF
 
 #define __io(a)			((void __iomem *)(a))
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
index cd22035..6fac2c8 100644
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ b/include/asm-arm/arch-omap/board-palmte.h
@@ -14,8 +14,6 @@
 #ifndef __OMAP_BOARD_PALMTE_H
 #define __OMAP_BOARD_PALMTE_H
 
-#include <asm/arch/gpio.h>
-
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
 #define PALMTE_TSC_GPIO		4
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 57523bd..12a5e4d 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -73,6 +73,8 @@
 #endif
 };
 
+struct cpufreq_frequency_table;
+
 struct clk_functions {
 	int		(*clk_enable)(struct clk *clk);
 	void		(*clk_disable)(struct clk *clk);
@@ -83,6 +85,9 @@
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
 };
 
 extern unsigned int mpurate;
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 74cd572..369093a 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <asm/hardware.h>
+#include <asm/arch/io.h>
 #include <asm/arch/irqs.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 86621a0..5ee6a49 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -26,7 +26,6 @@
 #ifndef __ASM_ARCH_OMAP_GPIO_H
 #define __ASM_ARCH_OMAP_GPIO_H
 
-#include <asm/hardware.h>
 #include <asm/arch/irqs.h>
 #include <asm/io.h>
 
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index da57209..91d85b3 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -41,7 +41,6 @@
 #include <asm/types.h>
 #include <asm/arch/cpu.h>
 #endif
-#include <asm/arch/io.h>
 #include <asm/arch/serial.h>
 
 /*
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
index eb6eaa1..bc73ab8 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h
@@ -112,6 +112,7 @@
 #define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
 #define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
 #define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
 
 /* I2C */
 #define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
index 763313c..b81cd63 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -134,7 +134,11 @@
 #define GPIO93_CIF_DD_6		93	/* Camera data pin 6 */
 #define GPIO94_CIF_DD_5		94	/* Camera data pin 5 */
 #define GPIO95_CIF_DD_4		95	/* Camera data pin 4 */
+#define GPIO96_FFRXD		96	/* FFUART recieve */
+#define GPIO98_FFRTS		98	/* FFUART request to send */
 #define GPIO98_CIF_DD_0		98	/* Camera data pin 0 */
+#define GPIO99_FFTXD		99	/* FFUART transmit data */
+#define GPIO100_FFCTS		100	/* FFUART Clear to send */
 #define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
 #define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
 #define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
@@ -316,6 +320,8 @@
 #define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
 #define GPIO85_CIF_LV_MD	(85 | GPIO_ALT_FN_3_IN)
 #define GPIO86_nPCE_1_MD	(86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD	(88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD	(89 | GPIO_ALT_FN_2_OUT)
 #define GPIO90_CIF_DD_4_MD	(90 | GPIO_ALT_FN_3_IN)
 #define GPIO91_CIF_DD_5_MD	(91 | GPIO_ALT_FN_3_IN)
 #define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
@@ -324,8 +330,11 @@
 #define GPIO95_CIF_DD_4_MD	(95 | GPIO_ALT_FN_2_IN)
 #define GPIO95_KP_MKIN6_MD	(95 | GPIO_ALT_FN_3_IN)
 #define GPIO96_KP_DKIN3_MD	(96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD		(96 | GPIO_ALT_FN_3_IN)
 #define GPIO97_KP_MKIN3_MD	(97 | GPIO_ALT_FN_3_IN)
 #define GPIO98_CIF_DD_0_MD	(98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD		(98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD		(99 | GPIO_ALT_FN_3_OUT)
 #define GPIO100_KP_MKIN0_MD	(100 | GPIO_ALT_FN_1_IN)
 #define GPIO101_KP_MKIN1_MD	(101 | GPIO_ALT_FN_1_IN)
 #define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
index 14a344a..762eba53 100644
--- a/include/asm-arm/arch-sa1100/collie.h
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -34,9 +34,12 @@
 
 #define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
 #define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
 #define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
 #define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
 #define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
 #define COLLIE_GPIO_CO			GPIO_GPIO (20)
 #define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
 #define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
@@ -49,6 +52,7 @@
 
 #define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
 #define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
 #define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
 #define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
 #define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 5c22b01..8e05bdb 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -179,10 +179,10 @@
 
 #endif /* STRICT_MM_TYPECHECKS */
 
-typedef struct page *pgtable_t;
-
 #endif /* CONFIG_MMU */
 
+typedef struct page *pgtable_t;
+
 #include <asm/memory.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
index 2e5868b..386fcc1 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/include/asm-arm/pgtable-nommu.h
@@ -16,7 +16,6 @@
 #include <linux/slab.h>
 #include <asm/processor.h>
 #include <asm/page.h>
-#include <asm/io.h>
 
 /*
  * Trivial page table functions.
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 800ba52..2b41ebb 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,7 +142,7 @@
 }
 
 /* write_can_lock - would write_trylock() succeed? */
-#define __raw_write_can_lock(x)		((x)->lock == 0x80000000)
+#define __raw_write_can_lock(x)		((x)->lock == 0)
 
 /*
  * Read locks are a bit more hairy:
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 6335de9..514af79 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -48,20 +48,6 @@
 #define CPUID_TCM	2
 #define CPUID_TLBTYPE	3
 
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg)							\
-	({								\
-		unsigned int __val;					\
-		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
-		    : "=r" (__val)					\
-		    :							\
-		    : "cc");						\
-		__val;							\
-	})
-#else
-#define read_cpuid(reg) (processor_id)
-#endif
-
 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust
@@ -78,6 +64,21 @@
 #include <linux/stringify.h>
 #include <linux/irqflags.h>
 
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
 /*
  * The CPU ID never changes at run time, so we might as well tell the
  * compiler that it's constant.  Use this function to read the CPU ID
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index a9248d8..7603383 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -105,13 +105,6 @@
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
-extern void led_on(int);
-extern void led_off(int);
-extern void led_toggle(int);
-extern void led_disp_num(int);
-extern void led_toggle_num(int);
-extern void init_leds(void);
-
 extern const char bfin_board_name[];
 extern unsigned long wall_jiffies;
 
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 735fa02..4725268 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -15,12 +15,16 @@
 
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (1)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
@@ -92,7 +96,6 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 26e3c80..96bd09e 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 5a6dcc5..8f7ea11 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -176,6 +176,21 @@
 #define ANOMALY_05000315 (1)
 /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
 #define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -249,20 +264,6 @@
 #define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
 /* Internal Voltage Regulator may not start up */
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* UART Break Signal Issues */
-#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
-/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000266 (0)
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index d016603..e924569 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index a6b08fa..8460ab9 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -132,8 +132,8 @@
 #define ANOMALY_05000322 (1)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
 #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */
-#define ANOMALY_05000350 (__SILICON_REVISION__ < 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (1)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -145,12 +145,10 @@
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3)
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 
-
-
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000158 (0)
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index f79d1a0..41d7b64 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 49d3ceb..3ad5965 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -75,6 +75,8 @@
 #define ANOMALY_05000365 (1)
 /* Addressing Conflict between Boot ROM and Asynchronous Memory */
 #define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
 /* Mobile DDR Operation Not Functional */
 #define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 5eb46a7..59b4ad4 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -57,6 +57,12 @@
 #define UART_SET_DLAB(uart)     /* MMRs not muxed on BF54x */
 #define UART_CLEAR_DLAB(uart)   /* MMRs not muxed on BF54x */
 
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 82157ca..5c5d7d7 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 7a96287..30d90b5 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h
index 9b16898..269da09 100644
--- a/include/asm-frv/checksum.h
+++ b/include/asm-frv/checksum.h
@@ -75,7 +75,7 @@
 	    : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
 	    : "0" (sum), "1" (iph), "2" (ihl), "3" (4),
 	    "m"(*(volatile struct { int _[100]; } *)iph)
-	    : "icc0", "icc1"
+	    : "icc0", "icc1", "memory"
 	    );
 
 	return (__force __sum16)~sum;
diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h
index 734a1d0..2947764 100644
--- a/include/asm-frv/mem-layout.h
+++ b/include/asm-frv/mem-layout.h
@@ -31,6 +31,13 @@
 
 #define PAGE_MASK			(~(PAGE_SIZE-1))
 
+/*
+ * the slab must be aligned such that load- and store-double instructions don't
+ * fault if used
+ */
+#define	ARCH_KMALLOC_MINALIGN		8
+#define	ARCH_SLAB_MINALIGN		8
+
 /*****************************************************************************/
 /*
  * virtual memory layout from kernel's point of view
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index ecf675a..6be061d 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -1,8 +1,12 @@
 #ifndef _ASM_GENERIC_GPIO_H
 #define _ASM_GENERIC_GPIO_H
 
+#include <linux/types.h>
+
 #ifdef CONFIG_HAVE_GPIO_LIB
 
+#include <linux/compiler.h>
+
 /* Platforms may implement their GPIO interface with library code,
  * at a small performance cost for non-inlined operations and some
  * extra memory (for code and for per-GPIO table entries).
@@ -74,7 +78,7 @@
 
 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
 			unsigned offset);
-extern int __init __must_check gpiochip_reserve(int start, int ngpio);
+extern int __must_check gpiochip_reserve(int start, int ngpio);
 
 /* add/remove chips */
 extern int gpiochip_add(struct gpio_chip *chip);
diff --git a/include/asm-h8300/cacheflush.h b/include/asm-h8300/cacheflush.h
index 71210d1..5ffdca2 100644
--- a/include/asm-h8300/cacheflush.h
+++ b/include/asm-h8300/cacheflush.h
@@ -3,7 +3,7 @@
  */
 
 #ifndef _ASM_H8300_CACHEFLUSH_H
-#define _AMS_H8300_CACHEFLUSH_H
+#define _ASM_H8300_CACHEFLUSH_H
 
 /*
  * Cache handling functions
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
index a715430..295fe6a 100644
--- a/include/asm-ia64/patch.h
+++ b/include/asm-ia64/patch.h
@@ -21,6 +21,7 @@
 extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
 extern void ia64_patch_vtop (unsigned long start, unsigned long end);
 extern void ia64_patch_phys_stack_reg(unsigned long val);
+extern void ia64_patch_rse (unsigned long start, unsigned long end);
 extern void ia64_patch_gate (void);
 
 #endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
index 4b2a8d4..15f8dcf 100644
--- a/include/asm-ia64/ptrace.h
+++ b/include/asm-ia64/ptrace.h
@@ -76,7 +76,7 @@
 # define KERNEL_STACK_SIZE_ORDER		0
 #endif
 
-#define IA64_RBS_OFFSET			((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_RBS_OFFSET			((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
 #define IA64_STK_OFFSET			((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
 
 #define KERNEL_STACK_SIZE		IA64_STK_OFFSET
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
index dc42a35..7286e4a 100644
--- a/include/asm-ia64/sections.h
+++ b/include/asm-ia64/sections.h
@@ -10,6 +10,7 @@
 
 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
 extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___rse_patchlist[], __end___rse_patchlist[];
 extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
 extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
 extern char __start_gate_section[];
diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h
index bd8c837..1c7047b 100644
--- a/include/asm-m32r/uaccess.h
+++ b/include/asm-m32r/uaccess.h
@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/thread_info.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -106,7 +107,6 @@
 #else
 static inline int access_ok(int type, const void *addr, unsigned long size)
 {
-	extern unsigned long memory_start, memory_end;
 	unsigned long val = (unsigned long)addr;
 
 	return ((val >= memory_start) && ((val + size) < memory_end));
diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h
index 01b2f92..3a492f2 100644
--- a/include/asm-mips/gic.h
+++ b/include/asm-mips/gic.h
@@ -330,7 +330,7 @@
 
 #define GIC_SH_RMASK_OFS		0x0300
 #define GIC_CLR_INTR_MASK(intr, val) \
-	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
 
 /* Register Map for Local Section */
 #define GIC_VPE_CTL_OFS			0x0000
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 363a14e..1b5064d 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1036,7 +1036,7 @@
 #define USBD_INTSTAT		0xB020001C
 #  define USBDEV_INT_SOF	(1 << 12)
 #  define USBDEV_INT_HF_BIT	6
-#  define USBDEV_INT_HF_MASK	0x3f << USBDEV_INT_HF_BIT)
+#  define USBDEV_INT_HF_MASK	(0x3f << USBDEV_INT_HF_BIT)
 #  define USBDEV_INT_CMPLT_BIT	0
 #  define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
 #define USBD_CONFIG		0xB0200020
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index ad17d7c..44a67bf 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -355,6 +355,7 @@
 u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
 
 u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
 void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
 
 /*
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index aa17f65..a46f8e2 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -765,6 +765,9 @@
 #define read_c0_index()		__read_32bit_c0_register($0, 0)
 #define write_c0_index(val)	__write_32bit_c0_register($0, 0, val)
 
+#define read_c0_random()	__read_32bit_c0_register($1, 0)
+#define write_c0_random(val)	__write_32bit_c0_register($1, 0, val)
+
 #define read_c0_entrylo0()	__read_ulong_c0_register($2, 0)
 #define write_c0_entrylo0(val)	__write_ulong_c0_register($2, 0, val)
 
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index 2f597ee..6a0edf7 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -239,9 +239,10 @@
 static inline pte_t pte_mkyoung(pte_t pte)
 {
 	pte.pte_low |= _PAGE_ACCESSED;
-	if (pte.pte_low & _PAGE_READ)
+	if (pte.pte_low & _PAGE_READ) {
 		pte.pte_low  |= _PAGE_SILENT_READ;
 		pte.pte_high |= _PAGE_SILENT_READ;
+	}
 	return pte;
 }
 #else
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
index 20b6660..4ca3063 100644
--- a/include/asm-mips/rtlx.h
+++ b/include/asm-mips/rtlx.h
@@ -3,7 +3,7 @@
  *
  */
 
-#ifndef __ASM_RTLX_H
+#ifndef __ASM_RTLX_H_
 #define __ASM_RTLX_H_
 
 #include <irq.h>
diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h
index efbbef8..f6f63d4 100644
--- a/include/asm-mn10300/ipcbuf.h
+++ b/include/asm-mn10300/ipcbuf.h
@@ -1,4 +1,4 @@
-#ifndef _ASM_IPCBUF_H_
+#ifndef _ASM_IPCBUF_H
 #define _ASM_IPCBUF_H
 
 /*
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index e0062d7..8918948 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -100,7 +100,7 @@
 {									\
 	type ret;							\
 	__asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync"		\
- 		: "=r" (ret) : "r" (addr), "m" (*addr));		\
+		: "=r" (ret) : "r" (addr), "m" (*addr) : "memory");	\
 	return ret;							\
 }
 
@@ -108,8 +108,8 @@
 static inline void name(volatile type __iomem *addr, type val)		\
 {									\
 	__asm__ __volatile__("sync;" insn				\
- 		: "=m" (*addr) : "r" (val), "r" (addr));		\
-	IO_SET_SYNC_FLAG();					\
+		: "=m" (*addr) : "r" (val), "r" (addr) : "memory");	\
+	IO_SET_SYNC_FLAG();						\
 }
 
 
@@ -333,7 +333,8 @@
 		"	.long	3b,5b\n"		\
 		".previous"				\
 		: "=&r" (x)				\
-		: "r" (port + _IO_BASE));		\
+		: "r" (port + _IO_BASE)			\
+		: "memory");  				\
 	return x;					\
 }
 
@@ -350,7 +351,8 @@
 		"	.long	0b,2b\n"		\
 		"	.long	1b,2b\n"		\
 		".previous"				\
-		: : "r" (val), "r" (port + _IO_BASE));	\
+		: : "r" (val), "r" (port + _IO_BASE)	\
+		: "memory");   	   	   		\
 }
 
 __do_in_asm(_rec_inb, "lbzx")
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index 943c5a3..a4d0f87 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -428,12 +428,11 @@
  */
 
 
-/* Change/Read the priority of an interrupt. Default is 8 for irqs and
+/* Change the priority of an interrupt. Default is 8 for irqs and
  * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
  * IPI number is then the offset'ed (linux irq number mapped to the IPI)
  */
 extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-extern unsigned int mpic_irq_get_priority(unsigned int irq);
 
 /* Setup a non-boot CPU */
 extern void mpic_setup_this_cpu(void);
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
index 0e959e2..41c5476 100644
--- a/include/asm-s390/types.h
+++ b/include/asm-s390/types.h
@@ -40,7 +40,13 @@
 
 #ifndef __ASSEMBLY__
 
+typedef u64 dma64_addr_t;
+#ifdef __s390x__
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
 typedef u32 dma_addr_t;
+#endif
 
 #ifndef __s390x__
 typedef union {
diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h
index 4bc8357..14b7ac2 100644
--- a/include/asm-sh/checksum_32.h
+++ b/include/asm-sh/checksum_32.h
@@ -109,7 +109,7 @@
 	   will assume they contain their original values. */
 	: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
 	: "1" (iph), "2" (ihl)
-	: "t");
+	: "t", "memory");
 
 	return	csum_fold(sum);
 }
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
index c299b85..3158960 100644
--- a/include/asm-sparc64/io.h
+++ b/include/asm-sparc64/io.h
@@ -24,7 +24,8 @@
 
 	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 
 	return ret;
 }
@@ -35,7 +36,8 @@
 
 	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 
 	return ret;
 }
@@ -46,7 +48,8 @@
 
 	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 
 	return ret;
 }
@@ -55,21 +58,24 @@
 {
 	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
 			     : /* no outputs */
-			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 }
 
 static inline void _outw(u16 w, unsigned long addr)
 {
 	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
 			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 }
 
 static inline void _outl(u32 l, unsigned long addr)
 {
 	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
 			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 }
 
 #define inb(__addr)		(_inb((unsigned long)(__addr)))
@@ -128,7 +134,8 @@
 
 	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 	return ret;
 }
 
@@ -137,7 +144,8 @@
 
 	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 
 	return ret;
 }
@@ -147,7 +155,8 @@
 
 	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 
 	return ret;
 }
@@ -157,7 +166,8 @@
 
 	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 
 	return ret;
 }
@@ -166,28 +176,32 @@
 {
 	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
 			     : /* no outputs */
-			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 }
 
 static inline void _writew(u16 w, volatile void __iomem *addr)
 {
 	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
 			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 }
 
 static inline void _writel(u32 l, volatile void __iomem *addr)
 {
 	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
 			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 }
 
 static inline void _writeq(u64 q, volatile void __iomem *addr)
 {
 	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
 			     : /* no outputs */
-			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
 }
 
 #define readb(__addr)		_readb(__addr)
@@ -299,7 +313,8 @@
 
 	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 
 	return ret;
 }
@@ -310,7 +325,8 @@
 
 	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 
 	return ret;
 }
@@ -321,7 +337,8 @@
 
 	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 
 	return ret;
 }
@@ -332,7 +349,8 @@
 
 	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
 			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 
 	return ret;
 }
@@ -341,28 +359,32 @@
 {
 	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
 			     : /* no outputs */
-			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 }
 
 static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
 {
 	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
 			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 }
 
 static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
 {
 	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
 			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 }
 
 static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
 {
 	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
 			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
 }
 
 #define sbus_readb(__addr)		_sbus_readb(__addr)
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
index d8a56cd..b163da7 100644
--- a/include/asm-sparc64/ptrace.h
+++ b/include/asm-sparc64/ptrace.h
@@ -126,6 +126,8 @@
 #define TRACEREG32_SZ	sizeof(struct pt_regs32)
 #define STACKFRAME32_SZ	sizeof(struct sparc_stackf32)
 
+#ifdef __KERNEL__
+
 struct global_reg_snapshot {
 	unsigned long		tstate;
 	unsigned long		tpc;
@@ -137,8 +139,6 @@
 	unsigned long		pad2;
 };
 
-#ifdef __KERNEL__
-
 #define __ARCH_WANT_COMPAT_SYS_PTRACE
 
 #define force_successful_syscall_return()	    \
@@ -306,6 +306,8 @@
 #define SF_XARG5  0x58
 #define SF_XXARG  0x5c
 
+#ifdef __KERNEL__
+
 /* global_reg_snapshot offsets */
 #define GR_SNAP_TSTATE	0x00
 #define GR_SNAP_TPC	0x08
@@ -316,6 +318,8 @@
 #define GR_SNAP_PAD1	0x30
 #define GR_SNAP_PAD2	0x38
 
+#endif  /*  __KERNEL__  */
+
 /* Stuff for the ptrace system call */
 #define PTRACE_SPARC_DETACH       11
 #define PTRACE_GETREGS            12
diff --git a/include/asm-um/mmu_context.h b/include/asm-um/mmu_context.h
index 6686fc5..54f42e8 100644
--- a/include/asm-um/mmu_context.h
+++ b/include/asm-um/mmu_context.h
@@ -22,16 +22,10 @@
 static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
 {
 	/*
-	 * This is called by fs/exec.c and fs/aio.c. In the first case, for an
-	 * exec, we don't need to do anything as we're called from userspace
-	 * and thus going to use a new host PID. In the second, we're called
-	 * from a kernel thread, and thus need to go doing the mmap's on the
-	 * host. Since they're very expensive, we want to avoid that as far as
-	 * possible.
+	 * This is called by fs/exec.c and sys_unshare()
+	 * when the new ->mm is used for the first time.
 	 */
-	if (old != new && (current->flags & PF_BORROWED_MM))
-		__switch_mm(&new->context.id);
-
+	__switch_mm(&new->context.id);
 	arch_dup_mmap(old, new);
 }
 
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
index 2b622ad..c389691 100644
--- a/include/asm-v850/clinkage.h
+++ b/include/asm-v850/clinkage.h
@@ -11,7 +11,7 @@
  * Written by Miles Bader <miles@gnu.org>
  */
 
-#ifndef __CLINKAGE_H__
+#ifndef __V850_CLINKAGE_H__
 #define __V850_CLINKAGE_H__
 
 #include <asm/macrology.h>
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 6b722d3..37672f7 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -193,6 +193,8 @@
 
 #else  /* CONFIG_X86_32 */
 
+extern void finit(void);
+
 static inline void tolerant_fwait(void)
 {
 	asm volatile("fnclex ; fwait");
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
index 0c0674d..35c76ce 100644
--- a/include/asm-x86/tlbflush.h
+++ b/include/asm-x86/tlbflush.h
@@ -22,12 +22,23 @@
 
 static inline void __native_flush_tlb_global(void)
 {
-	unsigned long cr4 = read_cr4();
+	unsigned long flags;
+	unsigned long cr4;
 
+	/*
+	 * Read-modify-write to CR4 - protect it from preemption and
+	 * from interrupts. (Use the raw variant because this code can
+	 * be called from deep inside debugging code.)
+	 */
+	raw_local_irq_save(flags);
+
+	cr4 = read_cr4();
 	/* clear PGE */
 	write_cr4(cr4 & ~X86_CR4_PGE);
 	/* write old PGE again and flush TLBs */
 	write_cr4(cr4);
+
+	raw_local_irq_restore(flags);
 }
 
 static inline void __native_flush_tlb_single(unsigned long addr)
diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h
index 05e540d..7ffe03f 100644
--- a/include/linux/bitrev.h
+++ b/include/linux/bitrev.h
@@ -10,6 +10,7 @@
 	return byte_rev_table[byte];
 }
 
+extern u16 bitrev16(u16 in);
 extern u32 bitrev32(u32 in);
 
 #endif /* _LINUX_BITREV_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index cfc3147..e3ef903 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -55,6 +55,7 @@
 enum blktrace_notify {
 	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
 	__BLK_TN_TIMESTAMP,		/* include system clock */
+	__BLK_TN_MESSAGE,		/* Character string message */
 };
 
 
@@ -79,6 +80,7 @@
 
 #define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
 #define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
 
 #define BLK_IO_TRACE_MAGIC	0x65617400
 #define BLK_IO_TRACE_VERSION	0x07
@@ -119,6 +121,7 @@
 	int trace_state;
 	struct rchan *rchan;
 	unsigned long *sequence;
+	unsigned char *msg_data;
 	u16 act_mask;
 	u64 start_lba;
 	u64 end_lba;
@@ -149,7 +152,28 @@
 extern void __blk_add_trace(struct blk_trace *, sector_t, int, int, u32, int, int, void *);
 extern int do_blk_trace_setup(struct request_queue *q,
 	char *name, dev_t dev, struct blk_user_trace_setup *buts);
+extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
 
+/**
+ * blk_add_trace_msg - Add a (simple) message to the blktrace stream
+ * @q:		queue the io is for
+ * @fmt:	format to print message in
+ * args...	Variable argument list for format
+ *
+ * Description:
+ *     Records a (simple) message onto the blktrace stream.
+ *
+ *     NOTE: BLK_TN_MAX_MSG characters are output at most.
+ *     NOTE: Can not use 'static inline' due to presence of var args...
+ *
+ **/
+#define blk_add_trace_msg(q, fmt, ...)					\
+	do {								\
+		struct blk_trace *bt = (q)->blk_trace;			\
+		if (unlikely(bt))					\
+			__trace_note_message(bt, fmt, ##__VA_ARGS__);	\
+	} while (0)
+#define BLK_TN_MAX_MSG		128
 
 /**
  * blk_add_trace_rq - Add a trace for a request oriented action
@@ -299,6 +323,8 @@
 #define blk_trace_setup(q, name, dev, arg)	(-ENOTTY)
 #define blk_trace_startstop(q, start)		(-ENOTTY)
 #define blk_trace_remove(q)			(-ENOTTY)
+#define blk_add_trace_msg(q, fmt, ...)		do { } while (0)
+
 #endif /* CONFIG_BLK_DEV_IO_TRACE */
 #endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/capability.h b/include/linux/capability.h
index f4ea0dd9a..fa830f8 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -31,11 +31,11 @@
 #define _LINUX_CAPABILITY_VERSION_1  0x19980330
 #define _LINUX_CAPABILITY_U32S_1     1
 
-#define _LINUX_CAPABILITY_VERSION_2  0x20071026
+#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
 #define _LINUX_CAPABILITY_U32S_2     2
 
-#define _LINUX_CAPABILITY_VERSION    _LINUX_CAPABILITY_VERSION_2
-#define _LINUX_CAPABILITY_U32S       _LINUX_CAPABILITY_U32S_2
+#define _LINUX_CAPABILITY_VERSION_3  0x20080522
+#define _LINUX_CAPABILITY_U32S_3     2
 
 typedef struct __user_cap_header_struct {
 	__u32 version;
@@ -77,10 +77,23 @@
 	} data[VFS_CAP_U32];
 };
 
-#ifdef __KERNEL__
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
+
+#else
+
+#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
+#define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
 
 typedef struct kernel_cap_struct {
-	__u32 cap[_LINUX_CAPABILITY_U32S];
+	__u32 cap[_KERNEL_CAPABILITY_U32S];
 } kernel_cap_t;
 
 #define _USER_CAP_HEADER_SIZE  (sizeof(struct __user_cap_header_struct))
@@ -351,7 +364,7 @@
  */
 
 #define CAP_FOR_EACH_U32(__capi)  \
-	for (__capi = 0; __capi < _LINUX_CAPABILITY_U32S; ++__capi)
+	for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi)
 
 # define CAP_FS_MASK_B0     (CAP_TO_MASK(CAP_CHOWN)		\
 			    | CAP_TO_MASK(CAP_DAC_OVERRIDE)	\
@@ -361,7 +374,7 @@
 
 # define CAP_FS_MASK_B1     (CAP_TO_MASK(CAP_MAC_OVERRIDE))
 
-#if _LINUX_CAPABILITY_U32S != 2
+#if _KERNEL_CAPABILITY_U32S != 2
 # error Fix up hand-coded capability macro initializers
 #else /* HAND-CODED capability initializers */
 
@@ -372,7 +385,7 @@
 # define CAP_NFSD_SET     ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \
 					CAP_FS_MASK_B1 } })
 
-#endif /* _LINUX_CAPABILITY_U32S != 2 */
+#endif /* _KERNEL_CAPABILITY_U32S != 2 */
 
 #define CAP_INIT_INH_SET    CAP_EMPTY_SET
 
diff --git a/include/linux/device.h b/include/linux/device.h
index 14616e8..6a2d04c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -385,6 +385,9 @@
 	return dev->bus_id;
 }
 
+extern int dev_set_name(struct device *dev, const char *name, ...)
+			__attribute__((format(printf, 2, 3)));
+
 #ifdef CONFIG_NUMA
 static inline int dev_to_node(struct device *dev)
 {
diff --git a/include/linux/fs.h b/include/linux/fs.h
index f413085..d490779 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2000,7 +2000,10 @@
 extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
 extern void simple_release_fs(struct vfsmount **mount, int *count);
 
-extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t);
+extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
+			loff_t *ppos, const void *from, size_t available);
+extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+			const void *from, size_t available);
 
 #ifdef CONFIG_MIGRATION
 extern int buffer_migrate_page(struct address_space *,
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 4987a84..98be6c5 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -8,6 +8,9 @@
 
 #else
 
+#include <linux/types.h>
+#include <linux/errno.h>
+
 /*
  * Some platforms don't support the GPIO programming interface.
  *
diff --git a/include/linux/in_route.h b/include/linux/in_route.h
index 61f25c3..b261b8c 100644
--- a/include/linux/in_route.h
+++ b/include/linux/in_route.h
@@ -10,19 +10,19 @@
 #define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
 
 #define RTCF_NOTIFY	0x00010000
-#define RTCF_DIRECTDST	0x00020000
+#define RTCF_DIRECTDST	0x00020000 /* unused */
 #define RTCF_REDIRECTED	0x00040000
-#define RTCF_TPROXY	0x00080000
+#define RTCF_TPROXY	0x00080000 /* unused */
 
-#define RTCF_FAST	0x00200000
-#define RTCF_MASQ	0x00400000
-#define RTCF_SNAT	0x00800000
+#define RTCF_FAST	0x00200000 /* unused */
+#define RTCF_MASQ	0x00400000 /* unused */
+#define RTCF_SNAT	0x00800000 /* unused */
 #define RTCF_DOREDIRECT 0x01000000
 #define RTCF_DIRECTSRC	0x04000000
 #define RTCF_DNAT	0x08000000
 #define RTCF_BROADCAST	0x10000000
 #define RTCF_MULTICAST	0x20000000
-#define RTCF_REJECT	0x40000000
+#define RTCF_REJECT	0x40000000 /* unused */
 #define RTCF_LOCAL	0x80000000
 
 #define RTCF_NAT	(RTCF_DNAT|RTCF_SNAT)
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 7009b0c..c6f51ad 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -117,7 +117,6 @@
 	__be32			ifa_address;
 	__be32			ifa_mask;
 	__be32			ifa_broadcast;
-	__be32			ifa_anycast;
 	unsigned char		ifa_scope;
 	unsigned char		ifa_flags;
 	unsigned char		ifa_prefixlen;
diff --git a/include/linux/input.h b/include/linux/input.h
index 28a094f..e075c4b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -637,7 +637,9 @@
 #define SW_LID			0x00  /* set = lid shut */
 #define SW_TABLET_MODE		0x01  /* set = tablet mode */
 #define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
-#define SW_RADIO		0x03  /* set = radio enabled */
+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)
 
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 05e2b30..d147f0f 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -919,6 +919,9 @@
 	struct proc_dir_entry	*j_proc_entry;
 	struct transaction_stats_s j_stats;
 
+	/* Failed journal commit ID */
+	unsigned int		j_failed_commit;
+
 	/*
 	 * An opaque pointer to fs-private information.  ext3 puts its
 	 * superblock pointer here
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4a92fba..e57e5d0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -111,13 +111,10 @@
 	/* various global constants */
 	LIBATA_MAX_PRD		= ATA_MAX_PRD / 2,
 	LIBATA_DUMB_MAX_PRD	= ATA_MAX_PRD / 4,	/* Worst case */
-	ATA_MAX_PORTS		= 8,
 	ATA_DEF_QUEUE		= 1,
 	/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
 	ATA_MAX_QUEUE		= 32,
 	ATA_TAG_INTERNAL	= ATA_MAX_QUEUE - 1,
-	ATA_MAX_BUS		= 2,
-	ATA_DEF_BUSY_WAIT	= 10000,
 	ATA_SHORT_PAUSE		= (HZ >> 6) + 1,
 
 	ATAPI_MAX_DRAIN		= 16 << 10,
@@ -1435,7 +1432,8 @@
 extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
 extern u8 ata_sff_check_status(struct ata_port *ap);
-extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
 extern int ata_sff_busy_sleep(struct ata_port *ap,
 			      unsigned long timeout_pat, unsigned long timeout);
 extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
@@ -1496,19 +1494,6 @@
 #endif /* CONFIG_PCI */
 
 /**
- *	ata_sff_pause - Flush writes and pause 400 nanoseconds.
- *	@ap: Port to wait for.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-static inline void ata_sff_pause(struct ata_port *ap)
-{
-	ata_sff_altstatus(ap);
-	ndelay(400);
-}
-
-/**
  *	ata_sff_busy_wait - Wait for a port status register
  *	@ap: Port to wait for.
  *	@bits: bits that must be clear
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 73e3586..ea9f5ad 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -77,14 +77,6 @@
 extern int __remove_pages(struct zone *zone, unsigned long start_pfn,
 	unsigned long nr_pages);
 
-/*
- * Walk through all memory which is registered as resource.
- * arg is (start_pfn, nr_pages, private_arg_pointer)
- */
-extern int walk_memory_resource(unsigned long start_pfn,
-			unsigned long nr_pages, void *arg,
-			int (*func)(unsigned long, unsigned long, void *));
-
 #ifdef CONFIG_NUMA
 extern int memory_add_physaddr_to_nid(u64 start);
 #else
@@ -199,6 +191,14 @@
 
 #endif /* ! CONFIG_MEMORY_HOTPLUG */
 
+/*
+ * Walk through all memory which is registered as resource.
+ * arg is (start_pfn, nr_pages, private_arg_pointer)
+ */
+extern int walk_memory_resource(unsigned long start_pfn,
+			unsigned long nr_pages, void *arg,
+			int (*func)(unsigned long, unsigned long, void *));
+
 extern int add_memory(int nid, u64 start, u64 size);
 extern int arch_add_memory(int nid, u64 start, u64 size);
 extern int remove_memory(u64 start, u64 size);
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 87920a0..dab8892 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -17,14 +17,14 @@
 
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
-extern atomic_t vm_committed_space;
+extern atomic_long_t vm_committed_space;
 
 #ifdef CONFIG_SMP
 extern void vm_acct_memory(long pages);
 #else
 static inline void vm_acct_memory(long pages)
 {
-	atomic_add(pages, &vm_committed_space);
+	atomic_long_add(pages, &vm_committed_space);
 }
 #endif
 
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index c463cd8..443bc7c 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -703,7 +703,7 @@
 extern struct zone *next_zone(struct zone *zone);
 
 /**
- * for_each_pgdat - helper macro to iterate over all nodes
+ * for_each_online_pgdat - helper macro to iterate over all online nodes
  * @pgdat - pointer to a pg_data_t variable
  */
 #define for_each_online_pgdat(pgdat)			\
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index d73ecea..69b2342 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -375,7 +375,8 @@
 
 struct i2c_device_id {
 	char name[I2C_NAME_SIZE];
-	kernel_ulong_t driver_data;	/* Data private to the driver */
+	kernel_ulong_t driver_data	/* Data private to the driver */
+			__attribute__((aligned(sizeof(kernel_ulong_t))));
 };
 
 
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index b03b274..81cd36b 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -57,12 +57,6 @@
 #define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
 #define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
 
-/* media of boot sector */
-static inline int fat_valid_media(u8 media)
-{
-	return 0xf8 <= media || media == 0xf0;
-}
-
 #define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
 	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
 
@@ -334,6 +328,12 @@
 #endif
 }
 
+/* media of boot sector */
+static inline int fat_valid_media(u8 media)
+{
+	return 0xf8 <= media || media == 0xf0;
+}
+
 /* fat/cache.c */
 extern void fat_cache_inval_inode(struct inode *inode);
 extern int fat_get_cluster(struct inode *inode, int cluster,
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 6f3b8e7..56abf155 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -64,11 +64,11 @@
 #define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
 
 /* unused */
-#define MSGPOOL (MSGMNI * MSGMNB) /* size in bytes of message pool */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
 #define MSGTQL  MSGMNB            /* number of system message headers */
 #define MSGMAP  MSGMNB            /* number of entries in message map */
 #define MSGSSZ  16                /* message segment size */
-#define __MSGSEG (MSGPOOL / MSGSSZ) /* max no. of segments */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
 #define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
 
 #ifdef __KERNEL__
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c42bc7f..53ea3dc 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -1,7 +1,7 @@
 /*
  *  linux/include/linux/mtd/nand.h
  *
- *  Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
+ *  Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
  *                     Steven J. Hill <sjhill@realitydiluted.com>
  *		       Thomas Gleixner <tglx@linutronix.de>
  *
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 2b02664..f27fd20 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -514,12 +514,10 @@
 #define NETIF_F_NETNS_LOCAL	8192	/* Does not change network namespaces */
 #define NETIF_F_MULTI_QUEUE	16384	/* Has multiple TX/RX queues */
 #define NETIF_F_LRO		32768	/* large receive offload */
-#define NETIF_F_VLAN_TSO	65536	/* Supports TSO for VLANs */
-#define NETIF_F_VLAN_CSUM	131072	/* Supports TX checksumming for VLANs */
 
 	/* Segmentation offload features */
-#define NETIF_F_GSO_SHIFT	20
-#define NETIF_F_GSO_MASK	0xfff00000
+#define NETIF_F_GSO_SHIFT	16
+#define NETIF_F_GSO_MASK	0xffff0000
 #define NETIF_F_TSO		(SKB_GSO_TCPV4 << NETIF_F_GSO_SHIFT)
 #define NETIF_F_UFO		(SKB_GSO_UDP << NETIF_F_GSO_SHIFT)
 #define NETIF_F_GSO_ROBUST	(SKB_GSO_DODGY << NETIF_F_GSO_SHIFT)
@@ -747,6 +745,9 @@
 	/* rtnetlink link ops */
 	const struct rtnl_link_ops *rtnl_link_ops;
 
+	/* VLAN feature mask */
+	unsigned long vlan_features;
+
 	/* for setting kernel sock attribute on TCP connection setup */
 #define GSO_MAX_SIZE		65536
 	unsigned int		gso_max_size;
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index e4c6659..0c5eb7e 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -3,7 +3,6 @@
 
 #ifdef __KERNEL__
 #include <linux/init.h>
-#include <linux/types.h>
 #include <linux/skbuff.h>
 #include <linux/net.h>
 #include <linux/netdevice.h>
@@ -14,6 +13,7 @@
 #include <linux/list.h>
 #include <net/net_namespace.h>
 #endif
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 /* Responses from hook functions. */
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index dd9c97f..590ac3d 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -11,11 +11,11 @@
 
 #ifdef __KERNEL__
 #include <linux/if.h>
-#include <linux/types.h>
 #include <linux/in.h>
 #include <linux/if_arp.h>
 #include <linux/skbuff.h>
 #endif
+#include <linux/types.h>
 #include <linux/compiler.h>
 #include <linux/netfilter_arp.h>
 
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index bfc889f..092bd50 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -17,11 +17,11 @@
 
 #ifdef __KERNEL__
 #include <linux/if.h>
-#include <linux/types.h>
 #include <linux/in.h>
 #include <linux/ip.h>
 #include <linux/skbuff.h>
 #endif
+#include <linux/types.h>
 #include <linux/compiler.h>
 #include <linux/netfilter_ipv4.h>
 
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index f2507dc..1089e33 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -17,11 +17,11 @@
 
 #ifdef __KERNEL__
 #include <linux/if.h>
-#include <linux/types.h>
 #include <linux/in6.h>
 #include <linux/ipv6.h>
 #include <linux/skbuff.h>
 #endif
+#include <linux/types.h>
 #include <linux/compiler.h>
 #include <linux/netfilter_ipv6.h>
 
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 590cff3..f31debf 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -306,5 +306,29 @@
 }
 
 #endif /* !PAGEFLAGS_EXTENDED */
+
+#define PAGE_FLAGS	(1 << PG_lru   | 1 << PG_private   | 1 << PG_locked | \
+			 1 << PG_buddy | 1 << PG_writeback | \
+			 1 << PG_slab  | 1 << PG_swapcache | 1 << PG_active)
+
+/*
+ * Flags checked in bad_page().  Pages on the free list should not have
+ * these flags set.  It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CLEAR_WHEN_BAD (PAGE_FLAGS | 1 << PG_reclaim | 1 << PG_dirty)
+
+/*
+ * Flags checked when a page is freed.  Pages being freed should not have
+ * these flags set.  It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_FREE (PAGE_FLAGS | 1 << PG_reserved)
+
+/*
+ * Flags checked when a page is prepped for return by the page allocator.
+ * Pages being prepped should not have these flags set.  It they are, there
+ * is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_PREP (PAGE_FLAGS | 1 << PG_reserved | 1 << PG_dirty)
+
 #endif /* !__GENERATING_BOUNDS_H */
 #endif	/* PAGE_FLAGS_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index cf6dbd75..9b940e6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1761,6 +1761,7 @@
 
 #define PCI_VENDOR_ID_INTASHIELD	0x135a
 #define PCI_DEVICE_ID_INTASHIELD_IS200	0x0d80
+#define PCI_DEVICE_ID_INTASHIELD_IS400	0x0dc0
 
 #define PCI_VENDOR_ID_QUATECH		0x135C
 #define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
@@ -2383,6 +2384,9 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
+#define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
+#define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
+#define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
 #define PCI_DEVICE_ID_INTEL_IOAT_SCNB	0x65ff
 #define PCI_DEVICE_ID_INTEL_TOLAPAI_0	0x5031
 #define PCI_DEVICE_ID_INTEL_TOLAPAI_1	0x5032
diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h
index 47fbcba..78bfdea 100644
--- a/include/linux/raid/bitmap.h
+++ b/include/linux/raid/bitmap.h
@@ -262,7 +262,6 @@
 void bitmap_flush(mddev_t *mddev);
 void bitmap_destroy(mddev_t *mddev);
 
-char *file_path(struct file *file, char *buf, int count);
 void bitmap_print_sb(struct bitmap *bitmap);
 void bitmap_update_sb(struct bitmap *bitmap);
 
diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h
index 81a1a02..b7386ae 100644
--- a/include/linux/raid/md.h
+++ b/include/linux/raid/md.h
@@ -72,6 +72,8 @@
  */
 #define MD_PATCHLEVEL_VERSION           3
 
+extern int mdp_major;
+
 extern int register_md_personality (struct mdk_personality *p);
 extern int unregister_md_personality (struct mdk_personality *p);
 extern mdk_thread_t * md_register_thread (void (*run) (mddev_t *mddev),
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 812ffa5..3dea9f5 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -180,13 +180,15 @@
 	int				sync_speed_min;
 	int				sync_speed_max;
 
+	/* resync even though the same disks are shared among md-devices */
+	int				parallel_resync;
+
 	int				ok_start_degraded;
 	/* recovery/resync flags 
 	 * NEEDED:   we might need to start a resync/recover
 	 * RUNNING:  a thread is running, or about to be started
 	 * SYNC:     actually doing a resync, not a recovery
-	 * ERR:      and IO error was detected - abort the resync/recovery
-	 * INTR:     someone requested a (clean) early abort.
+	 * INTR:     resync needs to be aborted for some reason
 	 * DONE:     thread is done and is waiting to be reaped
 	 * REQUEST:  user-space has requested a sync (used with SYNC)
 	 * CHECK:    user-space request for for check-only, no repair
@@ -196,7 +198,6 @@
 	 */
 #define	MD_RECOVERY_RUNNING	0
 #define	MD_RECOVERY_SYNC	1
-#define	MD_RECOVERY_ERR		2
 #define	MD_RECOVERY_INTR	3
 #define	MD_RECOVERY_DONE	4
 #define	MD_RECOVERY_NEEDED	5
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index 44c81c7..a2aec2c 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -267,10 +267,10 @@
 	RTA_PREFSRC,
 	RTA_METRICS,
 	RTA_MULTIPATH,
-	RTA_PROTOINFO,
+	RTA_PROTOINFO, /* no longer used */
 	RTA_FLOW,
 	RTA_CACHEINFO,
-	RTA_SESSION,
+	RTA_SESSION, /* no longer used */
 	RTA_MP_ALGO, /* no longer used */
 	RTA_TABLE,
 	__RTA_MAX
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 5395a61..ae0be3c 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -766,7 +766,6 @@
 	struct sched_domain *child;	/* bottom domain must be null terminated */
 	struct sched_group *groups;	/* the balancing groups of the domain */
 	cpumask_t span;			/* span of all CPUs in this domain */
-	int first_cpu;			/* cache of the first cpu in this domain */
 	unsigned long min_interval;	/* Minimum balance interval ms */
 	unsigned long max_interval;	/* Maximum balance interval ms */
 	unsigned int busy_factor;	/* less balancing by factor if busy */
@@ -1848,7 +1847,9 @@
 extern void exit_files(struct task_struct *);
 extern void __cleanup_signal(struct signal_struct *);
 extern void __cleanup_sighand(struct sighand_struct *);
+
 extern void exit_itimers(struct signal_struct *);
+extern void flush_itimer_signals(void);
 
 extern NORET_TYPE void do_group_exit(int);
 
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d32123a..d8f31de 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -192,6 +192,7 @@
 	void		(*shutdown)(struct uart_port *);
 	void		(*set_termios)(struct uart_port *, struct ktermios *new,
 				       struct ktermios *old);
+	void		(*set_ldisc)(struct uart_port *);
 	void		(*pm)(struct uart_port *, unsigned int state,
 			      unsigned int oldstate);
 	int		(*set_wake)(struct uart_port *, unsigned int state);
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 805ed4b..c2ad350 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -276,6 +276,17 @@
 	return kmalloc(size, flags | __GFP_ZERO);
 }
 
+/**
+ * kzalloc_node - allocate zeroed memory from a particular memory node.
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kmalloc).
+ * @node: memory node from which to allocate
+ */
+static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
+{
+	return kmalloc_node(size, flags | __GFP_ZERO, node);
+}
+
 #ifdef CONFIG_SLABINFO
 extern const struct seq_operations slabinfo_op;
 ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index bca1345..95c1c39 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -71,8 +71,8 @@
 #define SM501FB_FLAG_DISABLE_AT_EXIT	(1<<1)
 #define SM501FB_FLAG_USE_HWCURSOR	(1<<2)
 #define SM501FB_FLAG_USE_HWACCEL	(1<<3)
-#define SM501FB_FLAG_PANEL_USE_FPEN	(1<<4)
-#define SM501FB_FLAG_PANEL_USE_VBIASEN	(1<<5)
+#define SM501FB_FLAG_PANEL_NO_FPEN	(1<<4)
+#define SM501FB_FLAG_PANEL_NO_VBIASEN	(1<<5)
 
 struct sm501_platdata_fbsub {
 	struct fb_videomode	*def_mode;
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index e9bbe3e..d5ca78b 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -1,6 +1,8 @@
 #ifndef __LINUX_SPI_MMC_SPI_H
 #define __LINUX_SPI_MMC_SPI_H
 
+#include <linux/interrupt.h>
+
 struct device;
 struct mmc_host;
 
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index d96d9b1..18e62e3 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -355,7 +355,7 @@
 	u32	lost_retrans_low;	/* Sent seq after any rxmit (lowest) */
 
 	u16	advmss;		/* Advertised MSS			*/
-	u16	prior_ssthresh; /* ssthresh saved at recovery start	*/
+	u32	prior_ssthresh; /* ssthresh saved at recovery start	*/
 	u32	lost_out;	/* Lost packets			*/
 	u32	sacked_out;	/* SACK'd packets			*/
 	u32	fackets_out;	/* FACK'd packets			*/
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 4bb7074..24f3d22 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -166,7 +166,9 @@
 	.busy_idx		= 3,			\
 	.idle_idx		= 3,			\
 	.flags			= SD_LOAD_BALANCE	\
-				| SD_SERIALIZE,	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_AFFINE	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 64,			\
 }
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7f7121f..324a3b2 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -36,7 +36,7 @@
 #define N_6PACK		7
 #define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
 #define N_R3964		9	/* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
 #define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
 #define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
 				/* cards about SMS messages */
diff --git a/include/linux/types.h b/include/linux/types.h
index 9dc2346..d4a9ce6 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -197,8 +197,6 @@
 typedef u32 resource_size_t;
 #endif
 
-#endif	/* __KERNEL__ */
-
 struct ustat {
 	__kernel_daddr_t	f_tfree;
 	__kernel_ino_t		f_tinode;
@@ -206,4 +204,6 @@
 	char			f_fpack[6];
 };
 
+#endif	/* __KERNEL__ */
+
 #endif /* _LINUX_TYPES_H */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index c141118..4a535ea 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -865,9 +865,9 @@
 #define V4L2_CID_HFLIP			(V4L2_CID_BASE+20)
 #define V4L2_CID_VFLIP			(V4L2_CID_BASE+21)
 
-/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER_DEPRECATED	(V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER_DEPRECATED	(V4L2_CID_BASE+23)
+/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
+#define V4L2_CID_HCENTER		(V4L2_CID_BASE+22)
+#define V4L2_CID_VCENTER		(V4L2_CID_BASE+23)
 
 #define V4L2_CID_POWER_LINE_FREQUENCY	(V4L2_CID_BASE+24)
 enum v4l2_power_line_frequency {
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index d4695a3..5f79a5f 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -10,18 +10,19 @@
 #define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
 #define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
+#define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
 
 struct virtio_blk_config
 {
 	/* The capacity (in 512-byte sectors). */
-	__le64 capacity;
+	__u64 capacity;
 	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
-	__le32 size_max;
+	__u32 size_max;
 	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
-	__le32 seg_max;
+	__u32 seg_max;
 	/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
 	struct virtio_blk_geometry {
-		__le16 cylinders;
+		__u16 cylinders;
 		__u8 heads;
 		__u8 sectors;
 	} geometry;
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 50db245..f364bbf 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -15,6 +15,10 @@
 /* We've given up on this device. */
 #define VIRTIO_CONFIG_S_FAILED		0x80
 
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY	24
+
 #ifdef __KERNEL__
 #include <linux/virtio.h>
 
@@ -99,7 +103,7 @@
  * The return value is -ENOENT if the feature doesn't exist.  Otherwise
  * the config value is copied into whatever is pointed to by v. */
 #define virtio_config_val(vdev, fbit, offset, v) \
-	virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
+	virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
 
 static inline int virtio_config_buf(struct virtio_device *vdev,
 				    unsigned int fbit,
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
new file mode 100644
index 0000000..331afb6
--- /dev/null
+++ b/include/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_rng */
+#define VIRTIO_ID_RNG	4
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732..6f69968 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
 #define WM9713_ADCSEL_Y		0x0004	/* Y measurement */
 #define WM9713_ADCSEL_PRES	0x0008	/* Pressure measurement */
 #define WM9713_COO		0x0001	/* enable coordinate mode */
+#define WM9713_45W		0x1000  /* set for 5 wire panel */
 #define WM9713_PDEN		0x0800	/* measure only when pen down */
 #define WM9713_ADCSEL_MASK	0x00fe	/* ADC selection mask */
 #define WM9713_WAIT		0x0200	/* coordinate wait */
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index a807d2f..33f01ae 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -40,7 +40,6 @@
 #define VFL_TYPE_VTX		3
 
 /*  Video standard functions  */
-extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs);
 extern char *v4l2_norm_to_name(v4l2_std_id id);
 extern int v4l2_video_std_construct(struct v4l2_standard *vs,
 				    int id, char *name);
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 0a2f037..bbd3d58 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -94,6 +94,28 @@
 extern void			addrconf_leave_solict(struct inet6_dev *idev,
 					struct in6_addr *addr);
 
+static inline unsigned long addrconf_timeout_fixup(u32 timeout,
+						    unsigned unit)
+{
+	if (timeout == 0xffffffff)
+		return ~0UL;
+
+	/*
+	 * Avoid arithmetic overflow.
+	 * Assuming unit is constant and non-zero, this "if" statement
+	 * will go away on 64bit archs.
+	 */
+	if (0xfffffffe > LONG_MAX / unit && timeout > LONG_MAX / unit)
+		return LONG_MAX / unit;
+
+	return timeout;
+}
+
+static inline int addrconf_finite_timeout(unsigned long timeout)
+{
+	return ~timeout;
+}
+
 /*
  *	IPv6 Address Label subsystem (addrlabel.c)
  */
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index decdda5..747c255 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -162,9 +162,9 @@
  * @skb: socket buffer the message is stored in
  * @hdr: generic netlink message header
  */
-static inline int genlmsg_cancel(struct sk_buff *skb, void *hdr)
+static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr)
 {
-	return nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
+	nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
 }
 
 /**
diff --git a/include/net/netlink.h b/include/net/netlink.h
index a5506c42..dfc3701 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -556,14 +556,12 @@
  * @skb: socket buffer the message is stored in
  * @mark: mark to trim to
  *
- * Trims the message to the provided mark. Returns -1.
+ * Trims the message to the provided mark.
  */
-static inline int nlmsg_trim(struct sk_buff *skb, const void *mark)
+static inline void nlmsg_trim(struct sk_buff *skb, const void *mark)
 {
 	if (mark)
 		skb_trim(skb, (unsigned char *) mark - skb->data);
-
-	return -1;
 }
 
 /**
@@ -572,11 +570,11 @@
  * @nlh: netlink message header
  *
  * Removes the complete netlink message including all
- * attributes from the socket buffer again. Returns -1.
+ * attributes from the socket buffer again.
  */
-static inline int nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
+static inline void nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
 {
-	return nlmsg_trim(skb, nlh);
+	nlmsg_trim(skb, nlh);
 }
 
 /**
@@ -772,12 +770,13 @@
 					    const struct nla_policy *policy,
 					    int len)
 {
-	if (nla_len(nla) < len)
-		return -1;
-	if (nla_len(nla) >= NLA_ALIGN(len) + sizeof(struct nlattr))
-		return nla_parse_nested(tb, maxtype,
-					nla_data(nla) + NLA_ALIGN(len),
-					policy);
+	int nested_len = nla_len(nla) - NLA_ALIGN(len);
+
+	if (nested_len < 0)
+		return -EINVAL;
+	if (nested_len >= nla_attr_size(0))
+		return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len),
+				 nested_len, policy);
 	memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
 	return 0;
 }
@@ -1079,11 +1078,11 @@
  * @start: container attribute
  *
  * Removes the container attribute and including all nested
- * attributes. Returns -1.
+ * attributes. Returns -EMSGSIZE
  */
-static inline int nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
+static inline void nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
 {
-	return nlmsg_trim(skb, start);
+	nlmsg_trim(skb, start);
 }
 
 /**
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 0ce0443..7f25195 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -548,7 +548,8 @@
 	struct dst_entry *(*get_dst)	(struct sctp_association *asoc,
 					 union sctp_addr *daddr,
 					 union sctp_addr *saddr);
-	void		(*get_saddr)	(struct sctp_association *asoc,
+	void		(*get_saddr)	(struct sctp_sock *sk,
+					 struct sctp_association *asoc,
 					 struct dst_entry *dst,
 					 union sctp_addr *daddr,
 					 union sctp_addr *saddr);
@@ -587,6 +588,7 @@
 	int		(*is_ce)	(const struct sk_buff *sk);
 	void		(*seq_dump_addr)(struct seq_file *seq,
 					 union sctp_addr *addr);
+	void		(*ecn_capable)(struct sock *sk);
 	__u16		net_header_len;
 	int		sockaddr_len;
 	sa_family_t	sa_family;
@@ -901,7 +903,10 @@
 	 *		calculation completes (i.e. the DATA chunk
 	 *		is SACK'd) clear this flag.
 	 */
-	int rto_pending;
+	__u8 rto_pending;
+
+	/* Flag to track the current fast recovery state */
+	__u8 fast_recovery;
 
 	/*
 	 * These are the congestion stats.
@@ -920,6 +925,9 @@
 	/* Data that has been sent, but not acknowledged. */
 	__u32 flight_size;
 
+	/* TSN marking the fast recovery exit point */
+	__u32 fast_recovery_exit;
+
 	/* Destination */
 	struct dst_entry *dst;
 	/* Source address. */
@@ -1044,7 +1052,7 @@
 			  struct sctp_sock *);
 void sctp_transport_pmtu(struct sctp_transport *);
 void sctp_transport_free(struct sctp_transport *);
-void sctp_transport_reset_timers(struct sctp_transport *);
+void sctp_transport_reset_timers(struct sctp_transport *, int);
 void sctp_transport_hold(struct sctp_transport *);
 void sctp_transport_put(struct sctp_transport *);
 void sctp_transport_update_rto(struct sctp_transport *, __u32);
@@ -1134,6 +1142,9 @@
 	/* How many unackd bytes do we have in-flight?	*/
 	__u32 outstanding_bytes;
 
+	/* Are we doing fast-rtx on this queue */
+	char fast_rtx;
+
 	/* Corked? */
 	char cork;
 
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index 27394e0..112934a 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -40,7 +40,8 @@
 						  struct msghdr *msg,
 						  struct sk_buff *skb);
 
-extern int			datagram_send_ctl(struct msghdr *msg,
+extern int			datagram_send_ctl(struct net *net,
+						  struct msghdr *msg,
 						  struct flowi *fl,
 						  struct ipv6_txoptions *opt,
 						  int *hlimit, int *tclass);
diff --git a/include/net/udp.h b/include/net/udp.h
index 3e55a99..ccce837 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -135,6 +135,7 @@
 
 extern int	udp_sendmsg(struct kiocb *iocb, struct sock *sk,
 			    struct msghdr *msg, size_t len);
+extern void	udp_flush_pending_frames(struct sock *sk);
 
 extern int	udp_rcv(struct sk_buff *skb);
 extern int	udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 911a661..31d30b1 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -105,7 +105,6 @@
 	 */
 	IB_DEVICE_UD_IP_CSUM		= (1<<18),
 	IB_DEVICE_UD_TSO		= (1<<19),
-	IB_DEVICE_SEND_W_INV		= (1<<21),
 };
 
 enum ib_atomic_cap {
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 049edc5..9c309da 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -505,6 +505,7 @@
 			unsigned short pcmreg[3];	// PCM registers
 			unsigned short codec_cfg[3];	// CODEC_CFG bits
 			unsigned char swap_mic_linein;	// AD1986/AD1986A only
+			unsigned char lo_as_master;	/* LO as master */
 		} ad18xx;
 		unsigned int dev_flags;		/* device specific */
 	} spec;
diff --git a/init/Kconfig b/init/Kconfig
index 6135d07..6199d11 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -13,6 +13,7 @@
 	default "/lib/modules/$UNAME_RELEASE/.config"
 	default "/etc/kernel-config"
 	default "/boot/config-$UNAME_RELEASE"
+	default "$ARCH_DEFCONFIG"
 	default "arch/$ARCH/defconfig"
 
 menu "General setup"
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
index 7473b0c..693d246 100644
--- a/init/do_mounts_md.c
+++ b/init/do_mounts_md.c
@@ -24,7 +24,6 @@
 
 static int md_setup_ents __initdata;
 
-extern int mdp_major;
 /*
  * Parse the command-line parameters given our kernel, but do not
  * actually try to invoke the MD device now; that is handled by
diff --git a/ipc/msg.c b/ipc/msg.c
index 32494e8..b4eee1c 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -98,20 +98,15 @@
 
 	if (allowed < MSGMNI) {
 		ns->msg_ctlmni = MSGMNI;
-		goto out_callback;
+		return;
 	}
 
 	if (allowed > IPCMNI / nb_ns) {
 		ns->msg_ctlmni = IPCMNI / nb_ns;
-		goto out_callback;
+		return;
 	}
 
 	ns->msg_ctlmni = allowed;
-
-out_callback:
-
-	printk(KERN_INFO "msgmni has been set to %d for ipc namespace %p\n",
-		ns->msg_ctlmni, ns);
 }
 
 void msg_init_ns(struct ipc_namespace *ns)
@@ -136,6 +131,10 @@
 void __init msg_init(void)
 {
 	msg_init_ns(&init_ipc_ns);
+
+	printk(KERN_INFO "msgmni has been set to %d\n",
+		init_ipc_ns.msg_ctlmni);
+
 	ipc_init_proc_interface("sysvipc/msg",
 				"       key      msqid perms      cbytes       qnum lspid lrpid   uid   gid  cuid  cgid      stime      rtime      ctime\n",
 				IPC_MSG_IDS, sysvipc_msg_proc_show);
diff --git a/kernel/capability.c b/kernel/capability.c
index 39e8193..cfbe442 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -53,6 +53,69 @@
 }
 
 /*
+ * Version 2 capabilities worked fine, but the linux/capability.h file
+ * that accompanied their introduction encouraged their use without
+ * the necessary user-space source code changes. As such, we have
+ * created a version 3 with equivalent functionality to version 2, but
+ * with a header change to protect legacy source code from using
+ * version 2 when it wanted to use version 1. If your system has code
+ * that trips the following warning, it is using version 2 specific
+ * capabilities and may be doing so insecurely.
+ *
+ * The remedy is to either upgrade your version of libcap (to 2.10+,
+ * if the application is linked against it), or recompile your
+ * application with modern kernel headers and this warning will go
+ * away.
+ */
+
+static void warn_deprecated_v2(void)
+{
+	static int warned;
+
+	if (!warned) {
+		char name[sizeof(current->comm)];
+
+		printk(KERN_INFO "warning: `%s' uses deprecated v2"
+		       " capabilities in a way that may be insecure.\n",
+		       get_task_comm(name, current));
+		warned = 1;
+	}
+}
+
+/*
+ * Version check. Return the number of u32s in each capability flag
+ * array, or a negative value on error.
+ */
+static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy)
+{
+	__u32 version;
+
+	if (get_user(version, &header->version))
+		return -EFAULT;
+
+	switch (version) {
+	case _LINUX_CAPABILITY_VERSION_1:
+		warn_legacy_capability_use();
+		*tocopy = _LINUX_CAPABILITY_U32S_1;
+		break;
+	case _LINUX_CAPABILITY_VERSION_2:
+		warn_deprecated_v2();
+		/*
+		 * fall through - v3 is otherwise equivalent to v2.
+		 */
+	case _LINUX_CAPABILITY_VERSION_3:
+		*tocopy = _LINUX_CAPABILITY_U32S_3;
+		break;
+	default:
+		if (put_user((u32)_KERNEL_CAPABILITY_VERSION, &header->version))
+			return -EFAULT;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
  * For sys_getproccap() and sys_setproccap(), any of the three
  * capability set pointers may be NULL -- indicating that that set is
  * uninteresting and/or not to be changed.
@@ -71,27 +134,13 @@
 {
 	int ret = 0;
 	pid_t pid;
-	__u32 version;
 	struct task_struct *target;
 	unsigned tocopy;
 	kernel_cap_t pE, pI, pP;
 
-	if (get_user(version, &header->version))
-		return -EFAULT;
-
-	switch (version) {
-	case _LINUX_CAPABILITY_VERSION_1:
-		warn_legacy_capability_use();
-		tocopy = _LINUX_CAPABILITY_U32S_1;
-		break;
-	case _LINUX_CAPABILITY_VERSION_2:
-		tocopy = _LINUX_CAPABILITY_U32S_2;
-		break;
-	default:
-		if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
-			return -EFAULT;
-		return -EINVAL;
-	}
+	ret = cap_validate_magic(header, &tocopy);
+	if (ret != 0)
+		return ret;
 
 	if (get_user(pid, &header->pid))
 		return -EFAULT;
@@ -118,7 +167,7 @@
 	spin_unlock(&task_capability_lock);
 
 	if (!ret) {
-		struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+		struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
 		unsigned i;
 
 		for (i = 0; i < tocopy; i++) {
@@ -128,7 +177,7 @@
 		}
 
 		/*
-		 * Note, in the case, tocopy < _LINUX_CAPABILITY_U32S,
+		 * Note, in the case, tocopy < _KERNEL_CAPABILITY_U32S,
 		 * we silently drop the upper capabilities here. This
 		 * has the effect of making older libcap
 		 * implementations implicitly drop upper capability
@@ -240,30 +289,16 @@
  */
 asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
 {
-	struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+	struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
 	unsigned i, tocopy;
 	kernel_cap_t inheritable, permitted, effective;
-	__u32 version;
 	struct task_struct *target;
 	int ret;
 	pid_t pid;
 
-	if (get_user(version, &header->version))
-		return -EFAULT;
-
-	switch (version) {
-	case _LINUX_CAPABILITY_VERSION_1:
-		warn_legacy_capability_use();
-		tocopy = _LINUX_CAPABILITY_U32S_1;
-		break;
-	case _LINUX_CAPABILITY_VERSION_2:
-		tocopy = _LINUX_CAPABILITY_U32S_2;
-		break;
-	default:
-		if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
-			return -EFAULT;
-		return -EINVAL;
-	}
+	ret = cap_validate_magic(header, &tocopy);
+	if (ret != 0)
+		return ret;
 
 	if (get_user(pid, &header->pid))
 		return -EFAULT;
@@ -281,7 +316,7 @@
 		permitted.cap[i] = kdata[i].permitted;
 		inheritable.cap[i] = kdata[i].inheritable;
 	}
-	while (i < _LINUX_CAPABILITY_U32S) {
+	while (i < _KERNEL_CAPABILITY_U32S) {
 		effective.cap[i] = 0;
 		permitted.cap[i] = 0;
 		inheritable.cap[i] = 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fbc6fc89..15ac0e1 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2903,7 +2903,7 @@
 	cg = tsk->cgroups;
 	parent = task_cgroup(tsk, subsys->subsys_id);
 
-	snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "node_%d", tsk->pid);
+	snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "%d", tsk->pid);
 
 	/* Pin the hierarchy */
 	atomic_inc(&parent->root->sb->s_active);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 86ea9e3..039baa4 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -797,8 +797,10 @@
 		retval = cpulist_parse(buf, trialcs.cpus_allowed);
 		if (retval < 0)
 			return retval;
+
+		if (!cpus_subset(trialcs.cpus_allowed, cpu_online_map))
+			return -EINVAL;
 	}
-	cpus_and(trialcs.cpus_allowed, trialcs.cpus_allowed, cpu_online_map);
 	retval = validate_change(cs, &trialcs);
 	if (retval < 0)
 		return retval;
@@ -932,9 +934,11 @@
 		retval = nodelist_parse(buf, trialcs.mems_allowed);
 		if (retval < 0)
 			goto done;
+
+		if (!nodes_subset(trialcs.mems_allowed,
+				node_states[N_HIGH_MEMORY]))
+			return -EINVAL;
 	}
-	nodes_and(trialcs.mems_allowed, trialcs.mems_allowed,
-						node_states[N_HIGH_MEMORY]);
 	oldmem = cs->mems_allowed;
 	if (nodes_equal(oldmem, trialcs.mems_allowed)) {
 		retval = 0;		/* Too easy - nothing to do */
diff --git a/kernel/exit.c b/kernel/exit.c
index 1510f78..8f6185e 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -126,6 +126,12 @@
 
 	__unhash_process(tsk);
 
+	/*
+	 * Do this under ->siglock, we can race with another thread
+	 * doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals.
+	 */
+	flush_sigqueue(&tsk->pending);
+
 	tsk->signal = NULL;
 	tsk->sighand = NULL;
 	spin_unlock(&sighand->siglock);
@@ -133,7 +139,6 @@
 
 	__cleanup_sighand(sighand);
 	clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
-	flush_sigqueue(&tsk->pending);
 	if (sig) {
 		flush_sigqueue(&sig->shared_pending);
 		taskstats_tgid_free(sig);
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 14787de..79e3c90 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -52,6 +52,7 @@
 #include <asm/byteorder.h>
 #include <asm/atomic.h>
 #include <asm/system.h>
+#include <asm/unaligned.h>
 
 static int kgdb_break_asap;
 
@@ -227,8 +228,6 @@
  * GDB remote protocol parser:
  */
 
-static const char	hexchars[] = "0123456789abcdef";
-
 static int hex(char ch)
 {
 	if ((ch >= 'a') && (ch <= 'f'))
@@ -316,8 +315,8 @@
 		}
 
 		kgdb_io_ops->write_char('#');
-		kgdb_io_ops->write_char(hexchars[checksum >> 4]);
-		kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
+		kgdb_io_ops->write_char(hex_asc_hi(checksum));
+		kgdb_io_ops->write_char(hex_asc_lo(checksum));
 		if (kgdb_io_ops->flush)
 			kgdb_io_ops->flush();
 
@@ -478,8 +477,8 @@
 {
 	error = -error;
 	pkt[0] = 'E';
-	pkt[1] = hexchars[(error / 10)];
-	pkt[2] = hexchars[(error % 10)];
+	pkt[1] = hex_asc[(error / 10)];
+	pkt[2] = hex_asc[(error % 10)];
 	pkt[3] = '\0';
 }
 
@@ -510,10 +509,7 @@
 	scan = (unsigned char *)id;
 	while (i--)
 		*scan++ = 0;
-	*scan++ = (value >> 24) & 0xff;
-	*scan++ = (value >> 16) & 0xff;
-	*scan++ = (value >> 8) & 0xff;
-	*scan++ = (value & 0xff);
+	put_unaligned_be32(value, scan);
 }
 
 static struct task_struct *getthread(struct pt_regs *regs, int tid)
diff --git a/kernel/module.c b/kernel/module.c
index f5e9491..5f80478 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1337,7 +1337,19 @@
 	kobject_put(&mod->mkobj.kobj);
 	return err;
 }
-#endif
+
+static void mod_sysfs_fini(struct module *mod)
+{
+	kobject_put(&mod->mkobj.kobj);
+}
+
+#else /* CONFIG_SYSFS */
+
+static void mod_sysfs_fini(struct module *mod)
+{
+}
+
+#endif /* CONFIG_SYSFS */
 
 static void mod_kobject_remove(struct module *mod)
 {
@@ -1345,7 +1357,7 @@
 	module_param_sysfs_remove(mod);
 	kobject_put(mod->mkobj.drivers_dir);
 	kobject_put(mod->holders_dir);
-	kobject_put(&mod->mkobj.kobj);
+	mod_sysfs_fini(mod);
 }
 
 /*
@@ -1780,7 +1792,7 @@
 
 	/* Sanity checks against insmoding binaries or wrong arch,
            weird elf version */
-	if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+	if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
 	    || hdr->e_type != ET_REL
 	    || !elf_check_arch(hdr)
 	    || hdr->e_shentsize != sizeof(*sechdrs)) {
diff --git a/kernel/relay.c b/kernel/relay.c
index bc24dcd..7de644c 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1191,7 +1191,7 @@
 	ret = 0;
 	spliced = 0;
 
-	while (len) {
+	while (len && !spliced) {
 		ret = subbuf_splice_actor(in, ppos, pipe, len, flags, &nonpad_ret);
 		if (ret < 0)
 			break;
diff --git a/kernel/sched.c b/kernel/sched.c
index cfa222a..bfb8ad8 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -136,7 +136,7 @@
 
 static inline int rt_policy(int policy)
 {
-	if (unlikely(policy == SCHED_FIFO) || unlikely(policy == SCHED_RR))
+	if (unlikely(policy == SCHED_FIFO || policy == SCHED_RR))
 		return 1;
 	return 0;
 }
@@ -398,43 +398,6 @@
 	 */
 	struct list_head leaf_cfs_rq_list;
 	struct task_group *tg;	/* group that "owns" this runqueue */
-
-#ifdef CONFIG_SMP
-	unsigned long task_weight;
-	unsigned long shares;
-	/*
-	 * We need space to build a sched_domain wide view of the full task
-	 * group tree, in order to avoid depending on dynamic memory allocation
-	 * during the load balancing we place this in the per cpu task group
-	 * hierarchy. This limits the load balancing to one instance per cpu,
-	 * but more should not be needed anyway.
-	 */
-	struct aggregate_struct {
-		/*
-		 *   load = weight(cpus) * f(tg)
-		 *
-		 * Where f(tg) is the recursive weight fraction assigned to
-		 * this group.
-		 */
-		unsigned long load;
-
-		/*
-		 * part of the group weight distributed to this span.
-		 */
-		unsigned long shares;
-
-		/*
-		 * The sum of all runqueue weights within this span.
-		 */
-		unsigned long rq_weight;
-
-		/*
-		 * Weight contributed by tasks; this is the part we can
-		 * influence by moving tasks around.
-		 */
-		unsigned long task_weight;
-	} aggregate;
-#endif
 #endif
 };
 
@@ -1368,9 +1331,6 @@
  */
 #define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y))
 
-/*
- * delta *= weight / lw
- */
 static unsigned long
 calc_delta_mine(unsigned long delta_exec, unsigned long weight,
 		struct load_weight *lw)
@@ -1393,6 +1353,12 @@
 	return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX);
 }
 
+static inline unsigned long
+calc_delta_fair(unsigned long delta_exec, struct load_weight *lw)
+{
+	return calc_delta_mine(delta_exec, NICE_0_LOAD, lw);
+}
+
 static inline void update_load_add(struct load_weight *lw, unsigned long inc)
 {
 	lw->weight += inc;
@@ -1505,326 +1471,6 @@
 static unsigned long target_load(int cpu, int type);
 static unsigned long cpu_avg_load_per_task(int cpu);
 static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
-
-#ifdef CONFIG_FAIR_GROUP_SCHED
-
-/*
- * Group load balancing.
- *
- * We calculate a few balance domain wide aggregate numbers; load and weight.
- * Given the pictures below, and assuming each item has equal weight:
- *
- *         root          1 - thread
- *         / | \         A - group
- *        A  1  B
- *       /|\   / \
- *      C 2 D 3   4
- *      |   |
- *      5   6
- *
- * load:
- *    A and B get 1/3-rd of the total load. C and D get 1/3-rd of A's 1/3-rd,
- *    which equals 1/9-th of the total load.
- *
- * shares:
- *    The weight of this group on the selected cpus.
- *
- * rq_weight:
- *    Direct sum of all the cpu's their rq weight, e.g. A would get 3 while
- *    B would get 2.
- *
- * task_weight:
- *    Part of the rq_weight contributed by tasks; all groups except B would
- *    get 1, B gets 2.
- */
-
-static inline struct aggregate_struct *
-aggregate(struct task_group *tg, struct sched_domain *sd)
-{
-	return &tg->cfs_rq[sd->first_cpu]->aggregate;
-}
-
-typedef void (*aggregate_func)(struct task_group *, struct sched_domain *);
-
-/*
- * Iterate the full tree, calling @down when first entering a node and @up when
- * leaving it for the final time.
- */
-static
-void aggregate_walk_tree(aggregate_func down, aggregate_func up,
-			 struct sched_domain *sd)
-{
-	struct task_group *parent, *child;
-
-	rcu_read_lock();
-	parent = &root_task_group;
-down:
-	(*down)(parent, sd);
-	list_for_each_entry_rcu(child, &parent->children, siblings) {
-		parent = child;
-		goto down;
-
-up:
-		continue;
-	}
-	(*up)(parent, sd);
-
-	child = parent;
-	parent = parent->parent;
-	if (parent)
-		goto up;
-	rcu_read_unlock();
-}
-
-/*
- * Calculate the aggregate runqueue weight.
- */
-static
-void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd)
-{
-	unsigned long rq_weight = 0;
-	unsigned long task_weight = 0;
-	int i;
-
-	for_each_cpu_mask(i, sd->span) {
-		rq_weight += tg->cfs_rq[i]->load.weight;
-		task_weight += tg->cfs_rq[i]->task_weight;
-	}
-
-	aggregate(tg, sd)->rq_weight = rq_weight;
-	aggregate(tg, sd)->task_weight = task_weight;
-}
-
-/*
- * Compute the weight of this group on the given cpus.
- */
-static
-void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd)
-{
-	unsigned long shares = 0;
-	int i;
-
-	for_each_cpu_mask(i, sd->span)
-		shares += tg->cfs_rq[i]->shares;
-
-	if ((!shares && aggregate(tg, sd)->rq_weight) || shares > tg->shares)
-		shares = tg->shares;
-
-	aggregate(tg, sd)->shares = shares;
-}
-
-/*
- * Compute the load fraction assigned to this group, relies on the aggregate
- * weight and this group's parent's load, i.e. top-down.
- */
-static
-void aggregate_group_load(struct task_group *tg, struct sched_domain *sd)
-{
-	unsigned long load;
-
-	if (!tg->parent) {
-		int i;
-
-		load = 0;
-		for_each_cpu_mask(i, sd->span)
-			load += cpu_rq(i)->load.weight;
-
-	} else {
-		load = aggregate(tg->parent, sd)->load;
-
-		/*
-		 * shares is our weight in the parent's rq so
-		 * shares/parent->rq_weight gives our fraction of the load
-		 */
-		load *= aggregate(tg, sd)->shares;
-		load /= aggregate(tg->parent, sd)->rq_weight + 1;
-	}
-
-	aggregate(tg, sd)->load = load;
-}
-
-static void __set_se_shares(struct sched_entity *se, unsigned long shares);
-
-/*
- * Calculate and set the cpu's group shares.
- */
-static void
-__update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd,
-			  int tcpu)
-{
-	int boost = 0;
-	unsigned long shares;
-	unsigned long rq_weight;
-
-	if (!tg->se[tcpu])
-		return;
-
-	rq_weight = tg->cfs_rq[tcpu]->load.weight;
-
-	/*
-	 * If there are currently no tasks on the cpu pretend there is one of
-	 * average load so that when a new task gets to run here it will not
-	 * get delayed by group starvation.
-	 */
-	if (!rq_weight) {
-		boost = 1;
-		rq_weight = NICE_0_LOAD;
-	}
-
-	/*
-	 *           \Sum shares * rq_weight
-	 * shares =  -----------------------
-	 *               \Sum rq_weight
-	 *
-	 */
-	shares = aggregate(tg, sd)->shares * rq_weight;
-	shares /= aggregate(tg, sd)->rq_weight + 1;
-
-	/*
-	 * record the actual number of shares, not the boosted amount.
-	 */
-	tg->cfs_rq[tcpu]->shares = boost ? 0 : shares;
-
-	if (shares < MIN_SHARES)
-		shares = MIN_SHARES;
-	else if (shares > MAX_SHARES)
-		shares = MAX_SHARES;
-
-	__set_se_shares(tg->se[tcpu], shares);
-}
-
-/*
- * Re-adjust the weights on the cpu the task came from and on the cpu the
- * task went to.
- */
-static void
-__move_group_shares(struct task_group *tg, struct sched_domain *sd,
-		    int scpu, int dcpu)
-{
-	unsigned long shares;
-
-	shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
-
-	__update_group_shares_cpu(tg, sd, scpu);
-	__update_group_shares_cpu(tg, sd, dcpu);
-
-	/*
-	 * ensure we never loose shares due to rounding errors in the
-	 * above redistribution.
-	 */
-	shares -= tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
-	if (shares)
-		tg->cfs_rq[dcpu]->shares += shares;
-}
-
-/*
- * Because changing a group's shares changes the weight of the super-group
- * we need to walk up the tree and change all shares until we hit the root.
- */
-static void
-move_group_shares(struct task_group *tg, struct sched_domain *sd,
-		  int scpu, int dcpu)
-{
-	while (tg) {
-		__move_group_shares(tg, sd, scpu, dcpu);
-		tg = tg->parent;
-	}
-}
-
-static
-void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd)
-{
-	unsigned long shares = aggregate(tg, sd)->shares;
-	int i;
-
-	for_each_cpu_mask(i, sd->span) {
-		struct rq *rq = cpu_rq(i);
-		unsigned long flags;
-
-		spin_lock_irqsave(&rq->lock, flags);
-		__update_group_shares_cpu(tg, sd, i);
-		spin_unlock_irqrestore(&rq->lock, flags);
-	}
-
-	aggregate_group_shares(tg, sd);
-
-	/*
-	 * ensure we never loose shares due to rounding errors in the
-	 * above redistribution.
-	 */
-	shares -= aggregate(tg, sd)->shares;
-	if (shares) {
-		tg->cfs_rq[sd->first_cpu]->shares += shares;
-		aggregate(tg, sd)->shares += shares;
-	}
-}
-
-/*
- * Calculate the accumulative weight and recursive load of each task group
- * while walking down the tree.
- */
-static
-void aggregate_get_down(struct task_group *tg, struct sched_domain *sd)
-{
-	aggregate_group_weight(tg, sd);
-	aggregate_group_shares(tg, sd);
-	aggregate_group_load(tg, sd);
-}
-
-/*
- * Rebalance the cpu shares while walking back up the tree.
- */
-static
-void aggregate_get_up(struct task_group *tg, struct sched_domain *sd)
-{
-	aggregate_group_set_shares(tg, sd);
-}
-
-static DEFINE_PER_CPU(spinlock_t, aggregate_lock);
-
-static void __init init_aggregate(void)
-{
-	int i;
-
-	for_each_possible_cpu(i)
-		spin_lock_init(&per_cpu(aggregate_lock, i));
-}
-
-static int get_aggregate(struct sched_domain *sd)
-{
-	if (!spin_trylock(&per_cpu(aggregate_lock, sd->first_cpu)))
-		return 0;
-
-	aggregate_walk_tree(aggregate_get_down, aggregate_get_up, sd);
-	return 1;
-}
-
-static void put_aggregate(struct sched_domain *sd)
-{
-	spin_unlock(&per_cpu(aggregate_lock, sd->first_cpu));
-}
-
-static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares)
-{
-	cfs_rq->shares = shares;
-}
-
-#else
-
-static inline void init_aggregate(void)
-{
-}
-
-static inline int get_aggregate(struct sched_domain *sd)
-{
-	return 0;
-}
-
-static inline void put_aggregate(struct sched_domain *sd)
-{
-}
-#endif
-
 #else /* CONFIG_SMP */
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
@@ -1845,14 +1491,26 @@
 
 #define sched_class_highest (&rt_sched_class)
 
-static void inc_nr_running(struct rq *rq)
+static inline void inc_load(struct rq *rq, const struct task_struct *p)
 {
-	rq->nr_running++;
+	update_load_add(&rq->load, p->se.load.weight);
 }
 
-static void dec_nr_running(struct rq *rq)
+static inline void dec_load(struct rq *rq, const struct task_struct *p)
+{
+	update_load_sub(&rq->load, p->se.load.weight);
+}
+
+static void inc_nr_running(struct task_struct *p, struct rq *rq)
+{
+	rq->nr_running++;
+	inc_load(rq, p);
+}
+
+static void dec_nr_running(struct task_struct *p, struct rq *rq)
 {
 	rq->nr_running--;
+	dec_load(rq, p);
 }
 
 static void set_load_weight(struct task_struct *p)
@@ -1944,7 +1602,7 @@
 		rq->nr_uninterruptible--;
 
 	enqueue_task(rq, p, wakeup);
-	inc_nr_running(rq);
+	inc_nr_running(p, rq);
 }
 
 /*
@@ -1956,7 +1614,7 @@
 		rq->nr_uninterruptible++;
 
 	dequeue_task(rq, p, sleep);
-	dec_nr_running(rq);
+	dec_nr_running(p, rq);
 }
 
 /**
@@ -2609,7 +2267,7 @@
 		 * management (if any):
 		 */
 		p->sched_class->task_new(rq, p);
-		inc_nr_running(rq);
+		inc_nr_running(p, rq);
 	}
 	check_preempt_curr(rq, p);
 #ifdef CONFIG_SMP
@@ -3600,12 +3258,9 @@
 	unsigned long imbalance;
 	struct rq *busiest;
 	unsigned long flags;
-	int unlock_aggregate;
 
 	cpus_setall(*cpus);
 
-	unlock_aggregate = get_aggregate(sd);
-
 	/*
 	 * When power savings policy is enabled for the parent domain, idle
 	 * sibling can pick up load irrespective of busy siblings. In this case,
@@ -3721,9 +3376,8 @@
 
 	if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
 	    !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
-		ld_moved = -1;
-
-	goto out;
+		return -1;
+	return ld_moved;
 
 out_balanced:
 	schedstat_inc(sd, lb_balanced[idle]);
@@ -3738,13 +3392,8 @@
 
 	if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
 	    !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
-		ld_moved = -1;
-	else
-		ld_moved = 0;
-out:
-	if (unlock_aggregate)
-		put_aggregate(sd);
-	return ld_moved;
+		return -1;
+	return 0;
 }
 
 /*
@@ -4430,7 +4079,7 @@
 	 * schedule() atomically, we ignore that path for now.
 	 * Otherwise, whine if we are scheduling when we should not be.
 	 */
-	if (unlikely(in_atomic_preempt_off()) && unlikely(!prev->exit_state))
+	if (unlikely(in_atomic_preempt_off() && !prev->exit_state))
 		__schedule_bug(prev);
 
 	profile_hit(SCHED_PROFILING, __builtin_return_address(0));
@@ -4931,8 +4580,10 @@
 		goto out_unlock;
 	}
 	on_rq = p->se.on_rq;
-	if (on_rq)
+	if (on_rq) {
 		dequeue_task(rq, p, 0);
+		dec_load(rq, p);
+	}
 
 	p->static_prio = NICE_TO_PRIO(nice);
 	set_load_weight(p);
@@ -4942,6 +4593,7 @@
 
 	if (on_rq) {
 		enqueue_task(rq, p, 0);
+		inc_load(rq, p);
 		/*
 		 * If the task increased its priority or is running and
 		 * lowered its priority, then reschedule its CPU:
@@ -7316,7 +6968,6 @@
 			SD_INIT(sd, ALLNODES);
 			set_domain_attribute(sd, attr);
 			sd->span = *cpu_map;
-			sd->first_cpu = first_cpu(sd->span);
 			cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask);
 			p = sd;
 			sd_allnodes = 1;
@@ -7327,7 +6978,6 @@
 		SD_INIT(sd, NODE);
 		set_domain_attribute(sd, attr);
 		sched_domain_node_span(cpu_to_node(i), &sd->span);
-		sd->first_cpu = first_cpu(sd->span);
 		sd->parent = p;
 		if (p)
 			p->child = sd;
@@ -7339,7 +6989,6 @@
 		SD_INIT(sd, CPU);
 		set_domain_attribute(sd, attr);
 		sd->span = *nodemask;
-		sd->first_cpu = first_cpu(sd->span);
 		sd->parent = p;
 		if (p)
 			p->child = sd;
@@ -7351,7 +7000,6 @@
 		SD_INIT(sd, MC);
 		set_domain_attribute(sd, attr);
 		sd->span = cpu_coregroup_map(i);
-		sd->first_cpu = first_cpu(sd->span);
 		cpus_and(sd->span, sd->span, *cpu_map);
 		sd->parent = p;
 		p->child = sd;
@@ -7364,7 +7012,6 @@
 		SD_INIT(sd, SIBLING);
 		set_domain_attribute(sd, attr);
 		sd->span = per_cpu(cpu_sibling_map, i);
-		sd->first_cpu = first_cpu(sd->span);
 		cpus_and(sd->span, sd->span, *cpu_map);
 		sd->parent = p;
 		p->child = sd;
@@ -7568,8 +7215,8 @@
 
 static cpumask_t *doms_cur;	/* current sched domains */
 static int ndoms_cur;		/* number of sched domains in 'doms_cur' */
-static struct sched_domain_attr *dattr_cur;	/* attribues of custom domains
-						   in 'doms_cur' */
+static struct sched_domain_attr *dattr_cur;
+				/* attribues of custom domains in 'doms_cur' */
 
 /*
  * Special case: If a kmalloc of a doms_cur partition (array of
@@ -8034,7 +7681,6 @@
 	}
 
 #ifdef CONFIG_SMP
-	init_aggregate();
 	init_defrootdomain();
 #endif
 
@@ -8599,11 +8245,14 @@
 #endif
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
-static void __set_se_shares(struct sched_entity *se, unsigned long shares)
+static void set_se_shares(struct sched_entity *se, unsigned long shares)
 {
 	struct cfs_rq *cfs_rq = se->cfs_rq;
+	struct rq *rq = cfs_rq->rq;
 	int on_rq;
 
+	spin_lock_irq(&rq->lock);
+
 	on_rq = se->on_rq;
 	if (on_rq)
 		dequeue_entity(cfs_rq, se, 0);
@@ -8613,17 +8262,8 @@
 
 	if (on_rq)
 		enqueue_entity(cfs_rq, se, 0);
-}
 
-static void set_se_shares(struct sched_entity *se, unsigned long shares)
-{
-	struct cfs_rq *cfs_rq = se->cfs_rq;
-	struct rq *rq = cfs_rq->rq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rq->lock, flags);
-	__set_se_shares(se, shares);
-	spin_unlock_irqrestore(&rq->lock, flags);
+	spin_unlock_irq(&rq->lock);
 }
 
 static DEFINE_MUTEX(shares_mutex);
@@ -8662,13 +8302,8 @@
 	 * w/o tripping rebalance_share or load_balance_fair.
 	 */
 	tg->shares = shares;
-	for_each_possible_cpu(i) {
-		/*
-		 * force a rebalance
-		 */
-		cfs_rq_set_shares(tg->cfs_rq[i], 0);
+	for_each_possible_cpu(i)
 		set_se_shares(tg->se[i], shares);
-	}
 
 	/*
 	 * Enable load balance activity on this group, by inserting it back on
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 9c597e3..ce05271 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -59,22 +59,26 @@
 	return &per_cpu(sched_clock_data, cpu);
 }
 
+static __read_mostly int sched_clock_running;
+
 void sched_clock_init(void)
 {
 	u64 ktime_now = ktime_to_ns(ktime_get());
-	u64 now = 0;
+	unsigned long now_jiffies = jiffies;
 	int cpu;
 
 	for_each_possible_cpu(cpu) {
 		struct sched_clock_data *scd = cpu_sdc(cpu);
 
 		scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
-		scd->prev_jiffies = jiffies;
-		scd->prev_raw = now;
-		scd->tick_raw = now;
+		scd->prev_jiffies = now_jiffies;
+		scd->prev_raw = 0;
+		scd->tick_raw = 0;
 		scd->tick_gtod = ktime_now;
 		scd->clock = ktime_now;
 	}
+
+	sched_clock_running = 1;
 }
 
 /*
@@ -136,6 +140,9 @@
 	struct sched_clock_data *scd = cpu_sdc(cpu);
 	u64 now, clock;
 
+	if (unlikely(!sched_clock_running))
+		return 0ull;
+
 	WARN_ON_ONCE(!irqs_disabled());
 	now = sched_clock();
 
@@ -174,6 +181,9 @@
 	struct sched_clock_data *scd = this_scd();
 	u64 now, now_gtod;
 
+	if (unlikely(!sched_clock_running))
+		return;
+
 	WARN_ON_ONCE(!irqs_disabled());
 
 	now = sched_clock();
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 5f06118..8bb7130 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -167,11 +167,6 @@
 #endif
 	SEQ_printf(m, "  .%-30s: %ld\n", "nr_spread_over",
 			cfs_rq->nr_spread_over);
-#ifdef CONFIG_FAIR_GROUP_SCHED
-#ifdef CONFIG_SMP
-	SEQ_printf(m, "  .%-30s: %lu\n", "shares", cfs_rq->shares);
-#endif
-#endif
 }
 
 static void print_cpu(struct seq_file *m, int cpu)
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index e24ecd3..08ae848 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -334,34 +334,6 @@
 #endif
 
 /*
- * delta *= w / rw
- */
-static inline unsigned long
-calc_delta_weight(unsigned long delta, struct sched_entity *se)
-{
-	for_each_sched_entity(se) {
-		delta = calc_delta_mine(delta,
-				se->load.weight, &cfs_rq_of(se)->load);
-	}
-
-	return delta;
-}
-
-/*
- * delta *= rw / w
- */
-static inline unsigned long
-calc_delta_fair(unsigned long delta, struct sched_entity *se)
-{
-	for_each_sched_entity(se) {
-		delta = calc_delta_mine(delta,
-				cfs_rq_of(se)->load.weight, &se->load);
-	}
-
-	return delta;
-}
-
-/*
  * The idea is to set a period in which each task runs once.
  *
  * When there are too many tasks (sysctl_sched_nr_latency) we have to stretch
@@ -390,54 +362,47 @@
  */
 static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
-	return calc_delta_weight(__sched_period(cfs_rq->nr_running), se);
+	u64 slice = __sched_period(cfs_rq->nr_running);
+
+	for_each_sched_entity(se) {
+		cfs_rq = cfs_rq_of(se);
+
+		slice *= se->load.weight;
+		do_div(slice, cfs_rq->load.weight);
+	}
+
+
+	return slice;
 }
 
 /*
  * We calculate the vruntime slice of a to be inserted task
  *
- * vs = s*rw/w = p
+ * vs = s/w = p/rw
  */
 static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
 	unsigned long nr_running = cfs_rq->nr_running;
+	unsigned long weight;
+	u64 vslice;
 
 	if (!se->on_rq)
 		nr_running++;
 
-	return __sched_period(nr_running);
-}
-
-/*
- * The goal of calc_delta_asym() is to be asymmetrically around NICE_0_LOAD, in
- * that it favours >=0 over <0.
- *
- *   -20         |
- *               |
- *     0 --------+-------
- *             .'
- *    19     .'
- *
- */
-static unsigned long
-calc_delta_asym(unsigned long delta, struct sched_entity *se)
-{
-	struct load_weight lw = {
-		.weight = NICE_0_LOAD,
-		.inv_weight = 1UL << (WMULT_SHIFT-NICE_0_SHIFT)
-	};
+	vslice = __sched_period(nr_running);
 
 	for_each_sched_entity(se) {
-		struct load_weight *se_lw = &se->load;
+		cfs_rq = cfs_rq_of(se);
 
-		if (se->load.weight < NICE_0_LOAD)
-			se_lw = &lw;
+		weight = cfs_rq->load.weight;
+		if (!se->on_rq)
+			weight += se->load.weight;
 
-		delta = calc_delta_mine(delta,
-				cfs_rq_of(se)->load.weight, se_lw);
+		vslice *= NICE_0_LOAD;
+		do_div(vslice, weight);
 	}
 
-	return delta;
+	return vslice;
 }
 
 /*
@@ -454,7 +419,11 @@
 
 	curr->sum_exec_runtime += delta_exec;
 	schedstat_add(cfs_rq, exec_clock, delta_exec);
-	delta_exec_weighted = calc_delta_fair(delta_exec, curr);
+	delta_exec_weighted = delta_exec;
+	if (unlikely(curr->load.weight != NICE_0_LOAD)) {
+		delta_exec_weighted = calc_delta_fair(delta_exec_weighted,
+							&curr->load);
+	}
 	curr->vruntime += delta_exec_weighted;
 }
 
@@ -541,27 +510,10 @@
  * Scheduling class queueing methods:
  */
 
-#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED
-static void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
-	cfs_rq->task_weight += weight;
-}
-#else
-static inline void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
-}
-#endif
-
 static void
 account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
 	update_load_add(&cfs_rq->load, se->load.weight);
-	if (!parent_entity(se))
-		inc_cpu_load(rq_of(cfs_rq), se->load.weight);
-	if (entity_is_task(se))
-		add_cfs_task_weight(cfs_rq, se->load.weight);
 	cfs_rq->nr_running++;
 	se->on_rq = 1;
 	list_add(&se->group_node, &cfs_rq->tasks);
@@ -571,10 +523,6 @@
 account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
 	update_load_sub(&cfs_rq->load, se->load.weight);
-	if (!parent_entity(se))
-		dec_cpu_load(rq_of(cfs_rq), se->load.weight);
-	if (entity_is_task(se))
-		add_cfs_task_weight(cfs_rq, -se->load.weight);
 	cfs_rq->nr_running--;
 	se->on_rq = 0;
 	list_del_init(&se->group_node);
@@ -661,17 +609,8 @@
 
 	if (!initial) {
 		/* sleeps upto a single latency don't count. */
-		if (sched_feat(NEW_FAIR_SLEEPERS)) {
-			unsigned long thresh = sysctl_sched_latency;
-
-			/*
-			 * convert the sleeper threshold into virtual time
-			 */
-			if (sched_feat(NORMALIZED_SLEEPER))
-				thresh = calc_delta_fair(thresh, se);
-
-			vruntime -= thresh;
-		}
+		if (sched_feat(NEW_FAIR_SLEEPERS))
+			vruntime -= sysctl_sched_latency;
 
 		/* ensure we never gain time by being placed backwards. */
 		vruntime = max_vruntime(se->vruntime, vruntime);
@@ -1057,25 +996,12 @@
 	struct task_struct *curr = this_rq->curr;
 	unsigned long tl = this_load;
 	unsigned long tl_per_task;
+	int balanced;
 
-	if (!(this_sd->flags & SD_WAKE_AFFINE))
+	if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS))
 		return 0;
 
 	/*
-	 * If the currently running task will sleep within
-	 * a reasonable amount of time then attract this newly
-	 * woken task:
-	 */
-	if (sync && curr->sched_class == &fair_sched_class) {
-		if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
-				p->se.avg_overlap < sysctl_sched_migration_cost)
-			return 1;
-	}
-
-	schedstat_inc(p, se.nr_wakeups_affine_attempts);
-	tl_per_task = cpu_avg_load_per_task(this_cpu);
-
-	/*
 	 * If sync wakeup then subtract the (maximum possible)
 	 * effect of the currently running task from the load
 	 * of the current CPU:
@@ -1083,8 +1009,24 @@
 	if (sync)
 		tl -= current->se.load.weight;
 
+	balanced = 100*(tl + p->se.load.weight) <= imbalance*load;
+
+	/*
+	 * If the currently running task will sleep within
+	 * a reasonable amount of time then attract this newly
+	 * woken task:
+	 */
+	if (sync && balanced && curr->sched_class == &fair_sched_class) {
+		if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
+				p->se.avg_overlap < sysctl_sched_migration_cost)
+			return 1;
+	}
+
+	schedstat_inc(p, se.nr_wakeups_affine_attempts);
+	tl_per_task = cpu_avg_load_per_task(this_cpu);
+
 	if ((tl <= load && tl + target_load(prev_cpu, idx) <= tl_per_task) ||
-			100*(tl + p->se.load.weight) <= imbalance*load) {
+			balanced) {
 		/*
 		 * This domain has SD_WAKE_AFFINE and
 		 * p is cache cold in this domain, and
@@ -1169,10 +1111,11 @@
 	unsigned long gran = sysctl_sched_wakeup_granularity;
 
 	/*
-	 * More easily preempt - nice tasks, while not making it harder for
-	 * + nice tasks.
+	 * More easily preempt - nice tasks, while not making
+	 * it harder for + nice tasks.
 	 */
-	gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se);
+	if (unlikely(se->load.weight > NICE_0_LOAD))
+		gran = calc_delta_fair(gran, &se->load);
 
 	return gran;
 }
@@ -1366,90 +1309,75 @@
 	return __load_balance_iterator(cfs_rq, cfs_rq->balance_iterator);
 }
 
-static unsigned long
-__load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
-		unsigned long max_load_move, struct sched_domain *sd,
-		enum cpu_idle_type idle, int *all_pinned, int *this_best_prio,
-		struct cfs_rq *cfs_rq)
+#ifdef CONFIG_FAIR_GROUP_SCHED
+static int cfs_rq_best_prio(struct cfs_rq *cfs_rq)
 {
+	struct sched_entity *curr;
+	struct task_struct *p;
+
+	if (!cfs_rq->nr_running || !first_fair(cfs_rq))
+		return MAX_PRIO;
+
+	curr = cfs_rq->curr;
+	if (!curr)
+		curr = __pick_next_entity(cfs_rq);
+
+	p = task_of(curr);
+
+	return p->prio;
+}
+#endif
+
+static unsigned long
+load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
+		  unsigned long max_load_move,
+		  struct sched_domain *sd, enum cpu_idle_type idle,
+		  int *all_pinned, int *this_best_prio)
+{
+	struct cfs_rq *busy_cfs_rq;
+	long rem_load_move = max_load_move;
 	struct rq_iterator cfs_rq_iterator;
 
 	cfs_rq_iterator.start = load_balance_start_fair;
 	cfs_rq_iterator.next = load_balance_next_fair;
-	cfs_rq_iterator.arg = cfs_rq;
 
-	return balance_tasks(this_rq, this_cpu, busiest,
-			max_load_move, sd, idle, all_pinned,
-			this_best_prio, &cfs_rq_iterator);
-}
-
+	for_each_leaf_cfs_rq(busiest, busy_cfs_rq) {
 #ifdef CONFIG_FAIR_GROUP_SCHED
-static unsigned long
-load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
-		  unsigned long max_load_move,
-		  struct sched_domain *sd, enum cpu_idle_type idle,
-		  int *all_pinned, int *this_best_prio)
-{
-	long rem_load_move = max_load_move;
-	int busiest_cpu = cpu_of(busiest);
-	struct task_group *tg;
-
-	rcu_read_lock();
-	list_for_each_entry(tg, &task_groups, list) {
+		struct cfs_rq *this_cfs_rq;
 		long imbalance;
-		unsigned long this_weight, busiest_weight;
-		long rem_load, max_load, moved_load;
+		unsigned long maxload;
 
+		this_cfs_rq = cpu_cfs_rq(busy_cfs_rq, this_cpu);
+
+		imbalance = busy_cfs_rq->load.weight - this_cfs_rq->load.weight;
+		/* Don't pull if this_cfs_rq has more load than busy_cfs_rq */
+		if (imbalance <= 0)
+			continue;
+
+		/* Don't pull more than imbalance/2 */
+		imbalance /= 2;
+		maxload = min(rem_load_move, imbalance);
+
+		*this_best_prio = cfs_rq_best_prio(this_cfs_rq);
+#else
+# define maxload rem_load_move
+#endif
 		/*
-		 * empty group
+		 * pass busy_cfs_rq argument into
+		 * load_balance_[start|next]_fair iterators
 		 */
-		if (!aggregate(tg, sd)->task_weight)
-			continue;
+		cfs_rq_iterator.arg = busy_cfs_rq;
+		rem_load_move -= balance_tasks(this_rq, this_cpu, busiest,
+					       maxload, sd, idle, all_pinned,
+					       this_best_prio,
+					       &cfs_rq_iterator);
 
-		rem_load = rem_load_move * aggregate(tg, sd)->rq_weight;
-		rem_load /= aggregate(tg, sd)->load + 1;
-
-		this_weight = tg->cfs_rq[this_cpu]->task_weight;
-		busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight;
-
-		imbalance = (busiest_weight - this_weight) / 2;
-
-		if (imbalance < 0)
-			imbalance = busiest_weight;
-
-		max_load = max(rem_load, imbalance);
-		moved_load = __load_balance_fair(this_rq, this_cpu, busiest,
-				max_load, sd, idle, all_pinned, this_best_prio,
-				tg->cfs_rq[busiest_cpu]);
-
-		if (!moved_load)
-			continue;
-
-		move_group_shares(tg, sd, busiest_cpu, this_cpu);
-
-		moved_load *= aggregate(tg, sd)->load;
-		moved_load /= aggregate(tg, sd)->rq_weight + 1;
-
-		rem_load_move -= moved_load;
-		if (rem_load_move < 0)
+		if (rem_load_move <= 0)
 			break;
 	}
-	rcu_read_unlock();
 
 	return max_load_move - rem_load_move;
 }
-#else
-static unsigned long
-load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
-		  unsigned long max_load_move,
-		  struct sched_domain *sd, enum cpu_idle_type idle,
-		  int *all_pinned, int *this_best_prio)
-{
-	return __load_balance_fair(this_rq, this_cpu, busiest,
-			max_load_move, sd, idle, all_pinned,
-			this_best_prio, &busiest->cfs);
-}
-#endif
 
 static int
 move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 060e87b..3432d57 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -513,8 +513,6 @@
 	 */
 	for_each_sched_rt_entity(rt_se)
 		enqueue_rt_entity(rt_se);
-
-	inc_cpu_load(rq, p->se.load.weight);
 }
 
 static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
@@ -534,8 +532,6 @@
 		if (rt_rq && rt_rq->rt_nr_running)
 			enqueue_rt_entity(rt_se);
 	}
-
-	dec_cpu_load(rq, p->se.load.weight);
 }
 
 /*
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index 5bae2e0..a38878e 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -67,6 +67,7 @@
 		preempt_enable();
 #endif
 	}
+	kfree(mask_str);
 	return 0;
 }
 
diff --git a/kernel/signal.c b/kernel/signal.c
index 72bb4f5..6c0958e 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -231,6 +231,40 @@
 	spin_unlock_irqrestore(&t->sighand->siglock, flags);
 }
 
+static void __flush_itimer_signals(struct sigpending *pending)
+{
+	sigset_t signal, retain;
+	struct sigqueue *q, *n;
+
+	signal = pending->signal;
+	sigemptyset(&retain);
+
+	list_for_each_entry_safe(q, n, &pending->list, list) {
+		int sig = q->info.si_signo;
+
+		if (likely(q->info.si_code != SI_TIMER)) {
+			sigaddset(&retain, sig);
+		} else {
+			sigdelset(&signal, sig);
+			list_del_init(&q->list);
+			__sigqueue_free(q);
+		}
+	}
+
+	sigorsets(&pending->signal, &signal, &retain);
+}
+
+void flush_itimer_signals(void)
+{
+	struct task_struct *tsk = current;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tsk->sighand->siglock, flags);
+	__flush_itimer_signals(&tsk->pending);
+	__flush_itimer_signals(&tsk->signal->shared_pending);
+	spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
+}
+
 void ignore_signals(struct task_struct *t)
 {
 	int i;
@@ -1240,17 +1274,22 @@
 
 	BUG_ON(!(q->flags & SIGQUEUE_PREALLOC));
 	/*
-	 * If the signal is still pending remove it from the
-	 * pending queue. We must hold ->siglock while testing
-	 * q->list to serialize with collect_signal().
+	 * We must hold ->siglock while testing q->list
+	 * to serialize with collect_signal() or with
+	 * __exit_signal()->flush_sigqueue().
 	 */
 	spin_lock_irqsave(lock, flags);
+	q->flags &= ~SIGQUEUE_PREALLOC;
+	/*
+	 * If it is queued it will be freed when dequeued,
+	 * like the "regular" sigqueue.
+	 */
 	if (!list_empty(&q->list))
-		list_del_init(&q->list);
+		q = NULL;
 	spin_unlock_irqrestore(lock, flags);
 
-	q->flags &= ~SIGQUEUE_PREALLOC;
-	__sigqueue_free(q);
+	if (q)
+		__sigqueue_free(q);
 }
 
 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 0101aee..b7350bb 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -62,8 +62,7 @@
 		 * help our sisters onto their CPUs. */
 		if (!prepared && !irqs_disabled)
 			yield();
-		else
-			cpu_relax();
+		cpu_relax();
 	}
 
 	/* Ack: we are exiting. */
@@ -106,8 +105,10 @@
 	}
 
 	/* Wait for them all to come to life. */
-	while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads)
+	while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) {
 		yield();
+		cpu_relax();
+	}
 
 	/* If some failed, kill them all. */
 	if (ret < 0) {
diff --git a/kernel/sys.c b/kernel/sys.c
index 895d2d4..14e9728 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1652,7 +1652,7 @@
 asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
 			  unsigned long arg4, unsigned long arg5)
 {
-	long uninitialized_var(error);
+	long error = 0;
 
 	if (security_task_prctl(option, arg2, arg3, arg4, arg5, &error))
 		return error;
@@ -1701,9 +1701,7 @@
 			error = PR_TIMING_STATISTICAL;
 			break;
 		case PR_SET_TIMING:
-			if (arg2 == PR_TIMING_STATISTICAL)
-				error = 0;
-			else
+			if (arg2 != PR_TIMING_STATISTICAL)
 				error = -EINVAL;
 			break;
 
diff --git a/lib/bitrev.c b/lib/bitrev.c
index 989aff7..3956203 100644
--- a/lib/bitrev.c
+++ b/lib/bitrev.c
@@ -42,10 +42,11 @@
 };
 EXPORT_SYMBOL_GPL(byte_rev_table);
 
-static __always_inline u16 bitrev16(u16 x)
+u16 bitrev16(u16 x)
 {
 	return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8);
 }
+EXPORT_SYMBOL(bitrev16);
 
 /**
  * bitrev32 - reverse the order of bits in a u32 value
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index bbf953e..ab17127 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -785,7 +785,7 @@
 			continue;
 
 		spin_lock(&dst->page_table_lock);
-		spin_lock(&src->page_table_lock);
+		spin_lock_nested(&src->page_table_lock, SINGLE_DEPTH_NESTING);
 		if (!huge_pte_none(huge_ptep_get(src_pte))) {
 			if (cow)
 				huge_ptep_set_wrprotect(src, addr, src_pte);
diff --git a/mm/memory.c b/mm/memory.c
index fb5608a..19e0ae9 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2295,8 +2295,6 @@
 	vmf.flags = flags;
 	vmf.page = NULL;
 
-	BUG_ON(vma->vm_flags & VM_PFNMAP);
-
 	ret = vma->vm_ops->fault(vma, &vmf);
 	if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
 		return ret;
diff --git a/mm/mmap.c b/mm/mmap.c
index fac6633..3354fdd 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -80,7 +80,7 @@
 int sysctl_overcommit_memory = OVERCOMMIT_GUESS;  /* heuristic overcommit */
 int sysctl_overcommit_ratio = 50;	/* default is 50% */
 int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
 
 /*
  * Check that a process has enough memory to allocate a new virtual
@@ -177,7 +177,7 @@
 	 * cast `allowed' as a signed long because vm_committed_space
 	 * sometimes has a negative value
 	 */
-	if (atomic_read(&vm_committed_space) < (long)allowed)
+	if (atomic_long_read(&vm_committed_space) < (long)allowed)
 		return 0;
 error:
 	vm_unacct_memory(pages);
@@ -245,10 +245,16 @@
 	unsigned long rlim, retval;
 	unsigned long newbrk, oldbrk;
 	struct mm_struct *mm = current->mm;
+	unsigned long min_brk;
 
 	down_write(&mm->mmap_sem);
 
-	if (brk < mm->start_brk)
+#ifdef CONFIG_COMPAT_BRK
+	min_brk = mm->end_code;
+#else
+	min_brk = mm->start_brk;
+#endif
+	if (brk < min_brk)
 		goto out;
 
 	/*
diff --git a/mm/nommu.c b/mm/nommu.c
index ef8c62c..3abd084 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -39,7 +39,7 @@
 unsigned long max_mapnr;
 unsigned long num_physpages;
 unsigned long askedalloc, realalloc;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
 int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
 int sysctl_overcommit_ratio = 50; /* default is 50% */
 int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
@@ -104,21 +104,43 @@
 unsigned int kobjsize(const void *objp)
 {
 	struct page *page;
+	int order = 0;
 
 	/*
 	 * If the object we have should not have ksize performed on it,
 	 * return size of 0
 	 */
-	if (!objp || (unsigned long)objp >= memory_end || !((page = virt_to_page(objp))))
+	if (!objp)
 		return 0;
 
+	if ((unsigned long)objp >= memory_end)
+		return 0;
+
+	page = virt_to_head_page(objp);
+	if (!page)
+		return 0;
+
+	/*
+	 * If the allocator sets PageSlab, we know the pointer came from
+	 * kmalloc().
+	 */
 	if (PageSlab(page))
 		return ksize(objp);
 
-	BUG_ON(page->index < 0);
-	BUG_ON(page->index >= MAX_ORDER);
+	/*
+	 * The ksize() function is only guaranteed to work for pointers
+	 * returned by kmalloc(). So handle arbitrary pointers, that we expect
+	 * always to be compound pages, here.
+	 */
+	if (PageCompound(page))
+		order = compound_order(page);
 
-	return (PAGE_SIZE << page->index);
+	/*
+	 * Finally, handle arbitrary pointers that don't set PageSlab.
+	 * Default to 0-order in the case when we're unable to ksize()
+	 * the object.
+	 */
+	return PAGE_SIZE << order;
 }
 
 /*
@@ -1410,7 +1432,7 @@
 	 * cast `allowed' as a signed long because vm_committed_space
 	 * sometimes has a negative value
 	 */
-	if (atomic_read(&vm_committed_space) < (long)allowed)
+	if (atomic_long_read(&vm_committed_space) < (long)allowed)
 		return 0;
 error:
 	vm_unacct_memory(pages);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6383557..2f55295 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -237,16 +237,7 @@
 	printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
 		KERN_EMERG "Backtrace:\n");
 	dump_stack();
-	page->flags &= ~(1 << PG_lru	|
-			1 << PG_private |
-			1 << PG_locked	|
-			1 << PG_active	|
-			1 << PG_dirty	|
-			1 << PG_reclaim |
-			1 << PG_slab    |
-			1 << PG_swapcache |
-			1 << PG_writeback |
-			1 << PG_buddy );
+	page->flags &= ~PAGE_FLAGS_CLEAR_WHEN_BAD;
 	set_page_count(page, 0);
 	reset_page_mapcount(page);
 	page->mapping = NULL;
@@ -463,16 +454,7 @@
 		(page->mapping != NULL)  |
 		(page_get_page_cgroup(page) != NULL) |
 		(page_count(page) != 0)  |
-		(page->flags & (
-			1 << PG_lru	|
-			1 << PG_private |
-			1 << PG_locked	|
-			1 << PG_active	|
-			1 << PG_slab	|
-			1 << PG_swapcache |
-			1 << PG_writeback |
-			1 << PG_reserved |
-			1 << PG_buddy ))))
+		(page->flags & PAGE_FLAGS_CHECK_AT_FREE)))
 		bad_page(page);
 	if (PageDirty(page))
 		__ClearPageDirty(page);
@@ -616,17 +598,7 @@
 		(page->mapping != NULL)  |
 		(page_get_page_cgroup(page) != NULL) |
 		(page_count(page) != 0)  |
-		(page->flags & (
-			1 << PG_lru	|
-			1 << PG_private	|
-			1 << PG_locked	|
-			1 << PG_active	|
-			1 << PG_dirty	|
-			1 << PG_slab    |
-			1 << PG_swapcache |
-			1 << PG_writeback |
-			1 << PG_reserved |
-			1 << PG_buddy ))))
+		(page->flags & PAGE_FLAGS_CHECK_AT_PREP)))
 		bad_page(page);
 
 	/*
@@ -1396,6 +1368,9 @@
 
 	(void)first_zones_zonelist(zonelist, high_zoneidx, nodemask,
 							&preferred_zone);
+	if (!preferred_zone)
+		return NULL;
+
 	classzone_idx = zone_idx(preferred_zone);
 
 zonelist_scan:
@@ -2804,7 +2779,7 @@
 	alloc_size = zone->wait_table_hash_nr_entries
 					* sizeof(wait_queue_head_t);
 
- 	if (system_state == SYSTEM_BOOTING) {
+	if (!slab_is_available()) {
 		zone->wait_table = (wait_queue_head_t *)
 			alloc_bootmem_node(pgdat, alloc_size);
 	} else {
@@ -3378,7 +3353,8 @@
 		 * is used by this zone for memmap. This affects the watermark
 		 * and per-cpu initialisations
 		 */
-		memmap_pages = (size * sizeof(struct page)) >> PAGE_SHIFT;
+		memmap_pages =
+			PAGE_ALIGN(size * sizeof(struct page)) >> PAGE_SHIFT;
 		if (realsize >= memmap_pages) {
 			realsize -= memmap_pages;
 			printk(KERN_DEBUG
diff --git a/mm/slob.c b/mm/slob.c
index 6038cba..a3ad667 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -469,8 +469,9 @@
 			return ZERO_SIZE_PTR;
 
 		m = slob_alloc(size + align, gfp, align, node);
-		if (m)
-			*m = size;
+		if (!m)
+			return NULL;
+		*m = size;
 		return (void *)m + align;
 	} else {
 		void *ret;
diff --git a/mm/slub.c b/mm/slub.c
index a505a82..0987d1c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2726,9 +2726,10 @@
 
 	page = virt_to_head_page(object);
 
-	if (unlikely(!PageSlab(page)))
+	if (unlikely(!PageSlab(page))) {
+		WARN_ON(!PageCompound(page));
 		return PAGE_SIZE << compound_order(page);
-
+	}
 	s = page->slab;
 
 #ifdef CONFIG_SLUB_DEBUG
diff --git a/mm/swap.c b/mm/swap.c
index 91e1944..45c9f25 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -503,7 +503,7 @@
 	local = &__get_cpu_var(committed_space);
 	*local += pages;
 	if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
-		atomic_add(*local, &vm_committed_space);
+		atomic_long_add(*local, &vm_committed_space);
 		*local = 0;
 	}
 	preempt_enable();
@@ -520,7 +520,7 @@
 
 	committed = &per_cpu(committed_space, (long)hcpu);
 	if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
-		atomic_add(*committed, &vm_committed_space);
+		atomic_long_add(*committed, &vm_committed_space);
 		*committed = 0;
 		drain_cpu_pagevecs((long)hcpu);
 	}
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 5196130..ab2225d 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -387,14 +387,8 @@
 {
 	unsigned long old_features = vlandev->features;
 
-	if (dev->features & NETIF_F_VLAN_TSO) {
-		vlandev->features &= ~VLAN_TSO_FEATURES;
-		vlandev->features |= dev->features & VLAN_TSO_FEATURES;
-	}
-	if (dev->features & NETIF_F_VLAN_CSUM) {
-		vlandev->features &= ~NETIF_F_ALL_CSUM;
-		vlandev->features |= dev->features & NETIF_F_ALL_CSUM;
-	}
+	vlandev->features &= ~dev->vlan_features;
+	vlandev->features |= dev->features & dev->vlan_features;
 
 	if (old_features != vlandev->features)
 		netdev_features_change(vlandev);
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 7962569..5229a72 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -7,8 +7,6 @@
 #define VLAN_GRP_HASH_SIZE	(1 << VLAN_GRP_HASH_SHIFT)
 #define VLAN_GRP_HASH_MASK	(VLAN_GRP_HASH_SIZE - 1)
 
-#define VLAN_TSO_FEATURES	(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG)
-
 /*  Find a VLAN device by the MAC address of its Ethernet device, and
  *  it's VLAN ID.  The default configuration is to have VLAN's scope
  *  to be box-wide, so the MAC will be ignored.  The mac will only be
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b1cfbaa..5d055c2 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -663,10 +663,7 @@
 					  (1<<__LINK_STATE_DORMANT))) |
 		      (1<<__LINK_STATE_PRESENT);
 
-	if (real_dev->features & NETIF_F_VLAN_TSO)
-		dev->features |= real_dev->features & VLAN_TSO_FEATURES;
-	if (real_dev->features & NETIF_F_VLAN_CSUM)
-		dev->features |= real_dev->features & NETIF_F_ALL_CSUM;
+	dev->features |= real_dev->features & real_dev->vlan_features;
 
 	/* ipv6 shared card related stuff */
 	dev->dev_id = real_dev->dev_id;
diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c
index d8f2157..034aa10 100644
--- a/net/ax25/ax25_subr.c
+++ b/net/ax25/ax25_subr.c
@@ -64,20 +64,15 @@
 
 void ax25_requeue_frames(ax25_cb *ax25)
 {
-	struct sk_buff *skb, *skb_prev = NULL;
+	struct sk_buff *skb;
 
 	/*
 	 * Requeue all the un-ack-ed frames on the output queue to be picked
 	 * up by ax25_kick called from the timer. This arrangement handles the
 	 * possibility of an empty output queue.
 	 */
-	while ((skb = skb_dequeue(&ax25->ack_queue)) != NULL) {
-		if (skb_prev == NULL)
-			skb_queue_head(&ax25->write_queue, skb);
-		else
-			skb_append(skb_prev, skb, &ax25->write_queue);
-		skb_prev = skb;
-	}
+	while ((skb = skb_dequeue_tail(&ax25->ack_queue)) != NULL)
+		skb_queue_head(&ax25->write_queue, skb);
 }
 
 /*
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index eb62558..0c2c937 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -423,8 +423,8 @@
 
 		rfcomm_dlc_lock(d);
 		d->state = BT_CLOSED;
-		rfcomm_dlc_unlock(d);
 		d->state_change(d, err);
+		rfcomm_dlc_unlock(d);
 
 		skb_queue_purge(&d->tx_queue);
 		rfcomm_dlc_unlink(d);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index c3f749a..c919187 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -566,11 +566,22 @@
 	if (dlc->state == BT_CLOSED) {
 		if (!dev->tty) {
 			if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
-				if (rfcomm_dev_get(dev->id) == NULL)
+				/* Drop DLC lock here to avoid deadlock
+				 * 1. rfcomm_dev_get will take rfcomm_dev_lock
+				 *    but in rfcomm_dev_add there's lock order:
+				 *    rfcomm_dev_lock -> dlc lock
+				 * 2. rfcomm_dev_put will deadlock if it's
+				 *    the last reference
+				 */
+				rfcomm_dlc_unlock(dlc);
+				if (rfcomm_dev_get(dev->id) == NULL) {
+					rfcomm_dlc_lock(dlc);
 					return;
+				}
 
 				rfcomm_dev_del(dev);
 				rfcomm_dev_put(dev);
+				rfcomm_dlc_lock(dlc);
 			}
 		} else
 			tty_hangup(dev->tty);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 5d9d713..65f01f7 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1714,7 +1714,8 @@
 	return nla_nest_end(skb, nest);
 
 nla_put_failure:
-	return nla_nest_cancel(skb, nest);
+	nla_nest_cancel(skb, nest);
+	return -EMSGSIZE;
 }
 
 static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
@@ -2057,9 +2058,9 @@
 		goto nla_put_failure;
 	}
 
-	ci.ndm_used	 = now - neigh->used;
-	ci.ndm_confirmed = now - neigh->confirmed;
-	ci.ndm_updated	 = now - neigh->updated;
+	ci.ndm_used	 = jiffies_to_clock_t(now - neigh->used);
+	ci.ndm_confirmed = jiffies_to_clock_t(now - neigh->confirmed);
+	ci.ndm_updated	 = jiffies_to_clock_t(now - neigh->updated);
 	ci.ndm_refcnt	 = atomic_read(&neigh->refcnt) - 1;
 	read_unlock_bh(&neigh->lock);
 
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index cf857c4..a9a7721 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -498,7 +498,8 @@
 	return nla_nest_end(skb, mx);
 
 nla_put_failure:
-	return nla_nest_cancel(skb, mx);
+	nla_nest_cancel(skb, mx);
+	return -EMSGSIZE;
 }
 
 int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id,
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 5c459f2..1e556d3 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1445,6 +1445,7 @@
 
 	if (spd.nr_pages) {
 		int ret;
+		struct sock *sk = __skb->sk;
 
 		/*
 		 * Drop the socket lock, otherwise we have reverse
@@ -1455,9 +1456,9 @@
 		 * we call into ->sendpage() with the i_mutex lock held
 		 * and networking will grab the socket lock.
 		 */
-		release_sock(__skb->sk);
+		release_sock(sk);
 		ret = splice_to_pipe(pipe, &spd);
-		lock_sock(__skb->sk);
+		lock_sock(sk);
 		return ret;
 	}
 
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 0ad1cd5..c77aff9 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -75,7 +75,7 @@
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		copy = end - offset;
-		if ((copy = end - offset) > 0) {
+		if (copy > 0) {
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 			struct page *page = frag->page;
 
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index cd61dea..f813077 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -193,22 +193,17 @@
 
 /*
  *	Update Window Counter using the algorithm from [RFC 4342, 8.1].
- *	The algorithm is not applicable if RTT < 4 microseconds.
+ *	As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt().
  */
 static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
 						ktime_t now)
 {
-	u32 quarter_rtts;
-
-	if (unlikely(hctx->ccid3hctx_rtt < 4))	/* avoid divide-by-zero */
-		return;
-
-	quarter_rtts = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count);
-	quarter_rtts /= hctx->ccid3hctx_rtt / 4;
+	u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count),
+	    quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt;
 
 	if (quarter_rtts > 0) {
 		hctx->ccid3hctx_t_last_win_count = now;
-		hctx->ccid3hctx_last_win_count	+= min_t(u32, quarter_rtts, 5);
+		hctx->ccid3hctx_last_win_count  += min(quarter_rtts, 5U);
 		hctx->ccid3hctx_last_win_count	&= 0xF;		/* mod 16 */
 	}
 }
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index b348dd7..c22a378 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -739,8 +739,8 @@
 	 * If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet
 	 * has short sequence numbers), drop packet and return
 	 */
-	if (dh->dccph_type >= DCCP_PKT_DATA    &&
-	    dh->dccph_type <= DCCP_PKT_DATAACK && dh->dccph_x == 0)  {
+	if ((dh->dccph_type < DCCP_PKT_DATA    ||
+	    dh->dccph_type > DCCP_PKT_DATAACK) && dh->dccph_x == 0)  {
 		DCCP_WARN("P.type (%s) not Data || [Data]Ack, while P.X == 0\n",
 			  dccp_packet_name(dh->dccph_type));
 		return 1;
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 418862f..9b539fa 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1288,7 +1288,6 @@
 				   struct neighbour *n)
 {
 	char hbuffer[HBUFFERLEN];
-	const char hexbuf[] = "0123456789ABCDEF";
 	int k, j;
 	char tbuf[16];
 	struct net_device *dev = n->dev;
@@ -1302,8 +1301,8 @@
 	else {
 #endif
 	for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
-		hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
-		hbuffer[k++] = hexbuf[n->ha[j] & 15];
+		hbuffer[k++] = hex_asc_hi(n->ha[j]);
+		hbuffer[k++] = hex_asc_lo(n->ha[j]);
 		hbuffer[k++] = ':';
 	}
 	hbuffer[--k] = 0;
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 6848e47..79a7ef6 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -90,7 +90,6 @@
 	[IFA_LOCAL]     	= { .type = NLA_U32 },
 	[IFA_ADDRESS]   	= { .type = NLA_U32 },
 	[IFA_BROADCAST] 	= { .type = NLA_U32 },
-	[IFA_ANYCAST]   	= { .type = NLA_U32 },
 	[IFA_LABEL]     	= { .type = NLA_STRING, .len = IFNAMSIZ - 1 },
 };
 
@@ -536,9 +535,6 @@
 	if (tb[IFA_BROADCAST])
 		ifa->ifa_broadcast = nla_get_be32(tb[IFA_BROADCAST]);
 
-	if (tb[IFA_ANYCAST])
-		ifa->ifa_anycast = nla_get_be32(tb[IFA_ANYCAST]);
-
 	if (tb[IFA_LABEL])
 		nla_strlcpy(ifa->ifa_label, tb[IFA_LABEL], IFNAMSIZ);
 	else
@@ -745,7 +741,6 @@
 				break;
 			inet_del_ifa(in_dev, ifap, 0);
 			ifa->ifa_broadcast = 0;
-			ifa->ifa_anycast = 0;
 			ifa->ifa_scope = 0;
 		}
 
@@ -1113,7 +1108,6 @@
 	       + nla_total_size(4) /* IFA_ADDRESS */
 	       + nla_total_size(4) /* IFA_LOCAL */
 	       + nla_total_size(4) /* IFA_BROADCAST */
-	       + nla_total_size(4) /* IFA_ANYCAST */
 	       + nla_total_size(IFNAMSIZ); /* IFA_LABEL */
 }
 
@@ -1143,9 +1137,6 @@
 	if (ifa->ifa_broadcast)
 		NLA_PUT_BE32(skb, IFA_BROADCAST, ifa->ifa_broadcast);
 
-	if (ifa->ifa_anycast)
-		NLA_PUT_BE32(skb, IFA_ANYCAST, ifa->ifa_anycast);
-
 	if (ifa->ifa_label[0])
 		NLA_PUT_STRING(skb, IFA_LABEL, ifa->ifa_label);
 
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 0f1557a..0b2ac6a 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -506,7 +506,6 @@
 	[RTA_PREFSRC]		= { .type = NLA_U32 },
 	[RTA_METRICS]		= { .type = NLA_NESTED },
 	[RTA_MULTIPATH]		= { .len = sizeof(struct rtnexthop) },
-	[RTA_PROTOINFO]		= { .type = NLA_U32 },
 	[RTA_FLOW]		= { .type = NLA_U32 },
 };
 
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 2ada033..4342cba 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -313,9 +313,8 @@
 
 static void ipgre_err(struct sk_buff *skb, u32 info)
 {
-#ifndef I_WISH_WORLD_WERE_PERFECT
 
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
    8 bytes of packet payload. It means, that precise relaying of
    ICMP in the real Internet is absolutely infeasible.
 
@@ -398,149 +397,6 @@
 out:
 	read_unlock(&ipgre_lock);
 	return;
-#else
-	struct iphdr *iph = (struct iphdr*)dp;
-	struct iphdr *eiph;
-	__be16	     *p = (__be16*)(dp+(iph->ihl<<2));
-	const int type = icmp_hdr(skb)->type;
-	const int code = icmp_hdr(skb)->code;
-	int rel_type = 0;
-	int rel_code = 0;
-	__be32 rel_info = 0;
-	__u32 n = 0;
-	__be16 flags;
-	int grehlen = (iph->ihl<<2) + 4;
-	struct sk_buff *skb2;
-	struct flowi fl;
-	struct rtable *rt;
-
-	if (p[1] != htons(ETH_P_IP))
-		return;
-
-	flags = p[0];
-	if (flags&(GRE_CSUM|GRE_KEY|GRE_SEQ|GRE_ROUTING|GRE_VERSION)) {
-		if (flags&(GRE_VERSION|GRE_ROUTING))
-			return;
-		if (flags&GRE_CSUM)
-			grehlen += 4;
-		if (flags&GRE_KEY)
-			grehlen += 4;
-		if (flags&GRE_SEQ)
-			grehlen += 4;
-	}
-	if (len < grehlen + sizeof(struct iphdr))
-		return;
-	eiph = (struct iphdr*)(dp + grehlen);
-
-	switch (type) {
-	default:
-		return;
-	case ICMP_PARAMETERPROB:
-		n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
-		if (n < (iph->ihl<<2))
-			return;
-
-		/* So... This guy found something strange INSIDE encapsulated
-		   packet. Well, he is fool, but what can we do ?
-		 */
-		rel_type = ICMP_PARAMETERPROB;
-		n -= grehlen;
-		rel_info = htonl(n << 24);
-		break;
-
-	case ICMP_DEST_UNREACH:
-		switch (code) {
-		case ICMP_SR_FAILED:
-		case ICMP_PORT_UNREACH:
-			/* Impossible event. */
-			return;
-		case ICMP_FRAG_NEEDED:
-			/* And it is the only really necessary thing :-) */
-			n = ntohs(icmp_hdr(skb)->un.frag.mtu);
-			if (n < grehlen+68)
-				return;
-			n -= grehlen;
-			/* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
-			if (n > ntohs(eiph->tot_len))
-				return;
-			rel_info = htonl(n);
-			break;
-		default:
-			/* All others are translated to HOST_UNREACH.
-			   rfc2003 contains "deep thoughts" about NET_UNREACH,
-			   I believe, it is just ether pollution. --ANK
-			 */
-			rel_type = ICMP_DEST_UNREACH;
-			rel_code = ICMP_HOST_UNREACH;
-			break;
-		}
-		break;
-	case ICMP_TIME_EXCEEDED:
-		if (code != ICMP_EXC_TTL)
-			return;
-		break;
-	}
-
-	/* Prepare fake skb to feed it to icmp_send */
-	skb2 = skb_clone(skb, GFP_ATOMIC);
-	if (skb2 == NULL)
-		return;
-	dst_release(skb2->dst);
-	skb2->dst = NULL;
-	skb_pull(skb2, skb->data - (u8*)eiph);
-	skb_reset_network_header(skb2);
-
-	/* Try to guess incoming interface */
-	memset(&fl, 0, sizeof(fl));
-	fl.fl4_dst = eiph->saddr;
-	fl.fl4_tos = RT_TOS(eiph->tos);
-	fl.proto = IPPROTO_GRE;
-	if (ip_route_output_key(dev_net(skb->dev), &rt, &fl)) {
-		kfree_skb(skb2);
-		return;
-	}
-	skb2->dev = rt->u.dst.dev;
-
-	/* route "incoming" packet */
-	if (rt->rt_flags&RTCF_LOCAL) {
-		ip_rt_put(rt);
-		rt = NULL;
-		fl.fl4_dst = eiph->daddr;
-		fl.fl4_src = eiph->saddr;
-		fl.fl4_tos = eiph->tos;
-		if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
-		    rt->u.dst.dev->type != ARPHRD_IPGRE) {
-			ip_rt_put(rt);
-			kfree_skb(skb2);
-			return;
-		}
-	} else {
-		ip_rt_put(rt);
-		if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
-		    skb2->dst->dev->type != ARPHRD_IPGRE) {
-			kfree_skb(skb2);
-			return;
-		}
-	}
-
-	/* change mtu on this route */
-	if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
-		if (n > dst_mtu(skb2->dst)) {
-			kfree_skb(skb2);
-			return;
-		}
-		skb2->dst->ops->update_pmtu(skb2->dst, n);
-	} else if (type == ICMP_TIME_EXCEEDED) {
-		struct ip_tunnel *t = netdev_priv(skb2->dev);
-		if (t->parms.iph.ttl) {
-			rel_type = ICMP_DEST_UNREACH;
-			rel_code = ICMP_HOST_UNREACH;
-		}
-	}
-
-	icmp_send(skb2, rel_type, rel_code, rel_info);
-	kfree_skb(skb2);
-#endif
 }
 
 static inline void ipgre_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 149111f..af5cb53 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -278,9 +278,8 @@
 
 static int ipip_err(struct sk_buff *skb, u32 info)
 {
-#ifndef I_WISH_WORLD_WERE_PERFECT
 
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
    8 bytes of packet payload. It means, that precise relaying of
    ICMP in the real Internet is absolutely infeasible.
  */
@@ -337,133 +336,6 @@
 out:
 	read_unlock(&ipip_lock);
 	return err;
-#else
-	struct iphdr *iph = (struct iphdr*)dp;
-	int hlen = iph->ihl<<2;
-	struct iphdr *eiph;
-	const int type = icmp_hdr(skb)->type;
-	const int code = icmp_hdr(skb)->code;
-	int rel_type = 0;
-	int rel_code = 0;
-	__be32 rel_info = 0;
-	__u32 n = 0;
-	struct sk_buff *skb2;
-	struct flowi fl;
-	struct rtable *rt;
-
-	if (len < hlen + sizeof(struct iphdr))
-		return 0;
-	eiph = (struct iphdr*)(dp + hlen);
-
-	switch (type) {
-	default:
-		return 0;
-	case ICMP_PARAMETERPROB:
-		n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
-		if (n < hlen)
-			return 0;
-
-		/* So... This guy found something strange INSIDE encapsulated
-		   packet. Well, he is fool, but what can we do ?
-		 */
-		rel_type = ICMP_PARAMETERPROB;
-		rel_info = htonl((n - hlen) << 24);
-		break;
-
-	case ICMP_DEST_UNREACH:
-		switch (code) {
-		case ICMP_SR_FAILED:
-		case ICMP_PORT_UNREACH:
-			/* Impossible event. */
-			return 0;
-		case ICMP_FRAG_NEEDED:
-			/* And it is the only really necessary thing :-) */
-			n = ntohs(icmp_hdr(skb)->un.frag.mtu);
-			if (n < hlen+68)
-				return 0;
-			n -= hlen;
-			/* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
-			if (n > ntohs(eiph->tot_len))
-				return 0;
-			rel_info = htonl(n);
-			break;
-		default:
-			/* All others are translated to HOST_UNREACH.
-			   rfc2003 contains "deep thoughts" about NET_UNREACH,
-			   I believe, it is just ether pollution. --ANK
-			 */
-			rel_type = ICMP_DEST_UNREACH;
-			rel_code = ICMP_HOST_UNREACH;
-			break;
-		}
-		break;
-	case ICMP_TIME_EXCEEDED:
-		if (code != ICMP_EXC_TTL)
-			return 0;
-		break;
-	}
-
-	/* Prepare fake skb to feed it to icmp_send */
-	skb2 = skb_clone(skb, GFP_ATOMIC);
-	if (skb2 == NULL)
-		return 0;
-	dst_release(skb2->dst);
-	skb2->dst = NULL;
-	skb_pull(skb2, skb->data - (u8*)eiph);
-	skb_reset_network_header(skb2);
-
-	/* Try to guess incoming interface */
-	memset(&fl, 0, sizeof(fl));
-	fl.fl4_daddr = eiph->saddr;
-	fl.fl4_tos = RT_TOS(eiph->tos);
-	fl.proto = IPPROTO_IPIP;
-	if (ip_route_output_key(dev_net(skb->dev), &rt, &key)) {
-		kfree_skb(skb2);
-		return 0;
-	}
-	skb2->dev = rt->u.dst.dev;
-
-	/* route "incoming" packet */
-	if (rt->rt_flags&RTCF_LOCAL) {
-		ip_rt_put(rt);
-		rt = NULL;
-		fl.fl4_daddr = eiph->daddr;
-		fl.fl4_src = eiph->saddr;
-		fl.fl4_tos = eiph->tos;
-		if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
-		    rt->u.dst.dev->type != ARPHRD_TUNNEL) {
-			ip_rt_put(rt);
-			kfree_skb(skb2);
-			return 0;
-		}
-	} else {
-		ip_rt_put(rt);
-		if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
-		    skb2->dst->dev->type != ARPHRD_TUNNEL) {
-			kfree_skb(skb2);
-			return 0;
-		}
-	}
-
-	/* change mtu on this route */
-	if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
-		if (n > dst_mtu(skb2->dst)) {
-			kfree_skb(skb2);
-			return 0;
-		}
-		skb2->dst->ops->update_pmtu(skb2->dst, n);
-	} else if (type == ICMP_TIME_EXCEEDED) {
-		struct ip_tunnel *t = netdev_priv(skb2->dev);
-		if (t->parms.iph.ttl) {
-			rel_type = ICMP_DEST_UNREACH;
-			rel_code = ICMP_HOST_UNREACH;
-		}
-	}
-
-	icmp_send(skb2, rel_type, rel_code, rel_info);
-	kfree_skb(skb2);
-	return 0;
-#endif
 }
 
 static inline void ipip_ecn_decapsulate(const struct iphdr *outer_iph,
diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index 5daefad..7750c97 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -232,6 +232,11 @@
 			}
 		}
 	}
+
+	/* don't trust len bigger than ctx buffer */
+	if (*len > ctx->end - ctx->pointer)
+		return 0;
+
 	return 1;
 }
 
@@ -250,6 +255,10 @@
 	if (!asn1_length_decode(ctx, &def, &len))
 		return 0;
 
+	/* primitive shall be definite, indefinite shall be constructed */
+	if (*con == ASN1_PRI && !def)
+		return 0;
+
 	if (def)
 		*eoc = ctx->pointer + len;
 	else
@@ -434,6 +443,11 @@
 	unsigned long *optr;
 
 	size = eoc - ctx->pointer + 1;
+
+	/* first subid actually encodes first two subids */
+	if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+		return 0;
+
 	*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
 	if (*oid == NULL) {
 		if (net_ratelimit())
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index fead049..e7e091d 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -608,6 +608,14 @@
 	sk_common_release(sk);
 }
 
+static int raw_destroy(struct sock *sk)
+{
+	lock_sock(sk);
+	ip_flush_pending_frames(sk);
+	release_sock(sk);
+	return 0;
+}
+
 /* This gets rid of all the nasties in af_inet. -DaveM */
 static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
@@ -820,6 +828,7 @@
 	.name		   = "RAW",
 	.owner		   = THIS_MODULE,
 	.close		   = raw_close,
+	.destroy	   = raw_destroy,
 	.connect	   = ip4_datagram_connect,
 	.disconnect	   = udp_disconnect,
 	.ioctl		   = raw_ioctl,
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index df41026..96be336 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1792,7 +1792,7 @@
 	if (err)
 		flags |= RTCF_DIRECTSRC;
 
-	if (out_dev == in_dev && err && !(flags & RTCF_MASQ) &&
+	if (out_dev == in_dev && err &&
 	    (IN_DEV_SHARED_MEDIA(out_dev) ||
 	     inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res))))
 		flags |= RTCF_DOREDIRECT;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index f886531..ab66683 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1227,7 +1227,14 @@
 				copied += used;
 				offset += used;
 			}
-			if (offset != skb->len)
+			/*
+			 * If recv_actor drops the lock (e.g. TCP splice
+			 * receive) the skb pointer might be invalid when
+			 * getting here: tcp_collapse might have deleted it
+			 * while aggregating skbs from the socket queue.
+			 */
+			skb = tcp_recv_skb(sk, seq-1, &offset);
+			if (!skb || (offset+1 != skb->len))
 				break;
 		}
 		if (tcp_hdr(skb)->fin) {
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index b54d9d3..eba873e9 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1392,9 +1392,9 @@
 
 	if (before(next_dup->start_seq, skip_to_seq)) {
 		skb = tcp_sacktag_skip(skb, sk, next_dup->start_seq, fack_count);
-		tcp_sacktag_walk(skb, sk, NULL,
-				 next_dup->start_seq, next_dup->end_seq,
-				 1, fack_count, reord, flag);
+		skb = tcp_sacktag_walk(skb, sk, NULL,
+				     next_dup->start_seq, next_dup->end_seq,
+				     1, fack_count, reord, flag);
 	}
 
 	return skb;
@@ -2483,6 +2483,20 @@
 	tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR);
 }
 
+static void tcp_try_keep_open(struct sock *sk)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+	int state = TCP_CA_Open;
+
+	if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
+		state = TCP_CA_Disorder;
+
+	if (inet_csk(sk)->icsk_ca_state != state) {
+		tcp_set_ca_state(sk, state);
+		tp->high_seq = tp->snd_nxt;
+	}
+}
+
 static void tcp_try_to_open(struct sock *sk, int flag)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
@@ -2496,15 +2510,7 @@
 		tcp_enter_cwr(sk, 1);
 
 	if (inet_csk(sk)->icsk_ca_state != TCP_CA_CWR) {
-		int state = TCP_CA_Open;
-
-		if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
-			state = TCP_CA_Disorder;
-
-		if (inet_csk(sk)->icsk_ca_state != state) {
-			tcp_set_ca_state(sk, state);
-			tp->high_seq = tp->snd_nxt;
-		}
+		tcp_try_keep_open(sk);
 		tcp_moderate_cwnd(tp);
 	} else {
 		tcp_cwnd_down(sk, flag);
@@ -3310,8 +3316,11 @@
 	return 1;
 
 old_ack:
-	if (TCP_SKB_CB(skb)->sacked)
+	if (TCP_SKB_CB(skb)->sacked) {
 		tcp_sacktag_write_queue(sk, skb, prior_snd_una);
+		if (icsk->icsk_ca_state == TCP_CA_Open)
+			tcp_try_keep_open(sk);
+	}
 
 uninteresting_ack:
 	SOCK_DEBUG(sk, "Ack %u out of %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index debf235..ad993ec 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1836,7 +1836,7 @@
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct inet_connection_sock *icsk = inet_csk(sk);
-	unsigned int cur_mss = tcp_current_mss(sk, 0);
+	unsigned int cur_mss;
 	int err;
 
 	/* Inconslusive MTU probe */
@@ -1858,6 +1858,11 @@
 			return -ENOMEM;
 	}
 
+	if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
+		return -EHOSTUNREACH; /* Routing failure or similar. */
+
+	cur_mss = tcp_current_mss(sk, 0);
+
 	/* If receiver has shrunk his window, and skb is out of
 	 * new window, do not retransmit it. The exception is the
 	 * case, when window is shrunk to zero. In this case
@@ -1884,9 +1889,6 @@
 	    (sysctl_tcp_retrans_collapse != 0))
 		tcp_retrans_try_collapse(sk, skb, cur_mss);
 
-	if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
-		return -EHOSTUNREACH; /* Routing failure or similar. */
-
 	/* Some Solaris stacks overoptimize and ignore the FIN on a
 	 * retransmit when old data is attached.  So strip it off
 	 * since it is cheap to do so and saves bytes on the network.
@@ -2129,6 +2131,8 @@
 	TCP_SKB_CB(skb)->when = tcp_time_stamp;
 	if (tcp_transmit_skb(sk, skb, 0, priority))
 		NET_INC_STATS(LINUX_MIB_TCPABORTFAILED);
+
+	TCP_INC_STATS(TCP_MIB_OUTRSTS);
 }
 
 /* WARNING: This routine must only be called when we have already sent
diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c
index d3b709a..cb1f0e8 100644
--- a/net/ipv4/tunnel4.c
+++ b/net/ipv4/tunnel4.c
@@ -97,7 +97,7 @@
 {
 	struct xfrm_tunnel *handler;
 
-	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
 		goto drop;
 
 	for (handler = tunnel64_handlers; handler; handler = handler->next)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index db1cb7c..56fcda3 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -420,7 +420,7 @@
 /*
  * Throw away all pending data and cancel the corking. Socket is locked.
  */
-static void udp_flush_pending_frames(struct sock *sk)
+void udp_flush_pending_frames(struct sock *sk)
 {
 	struct udp_sock *up = udp_sk(sk);
 
@@ -430,6 +430,7 @@
 		ip_flush_pending_frames(sk);
 	}
 }
+EXPORT_SYMBOL(udp_flush_pending_frames);
 
 /**
  * 	udp4_hwcsum_outgoing  -  handle outgoing HW checksumming
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3a83557..147588f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -731,8 +731,13 @@
 						onlink = -1;
 
 					spin_lock(&ifa->lock);
-					lifetime = min_t(unsigned long,
-							 ifa->valid_lft, 0x7fffffffUL/HZ);
+
+					lifetime = addrconf_timeout_fixup(ifa->valid_lft, HZ);
+					/*
+					 * Note: Because this address is
+					 * not permanent, lifetime <
+					 * LONG_MAX / HZ here.
+					 */
 					if (time_before(expires,
 							ifa->tstamp + lifetime * HZ))
 						expires = ifa->tstamp + lifetime * HZ;
@@ -1722,7 +1727,6 @@
 	__u32 valid_lft;
 	__u32 prefered_lft;
 	int addr_type;
-	unsigned long rt_expires;
 	struct inet6_dev *in6_dev;
 
 	pinfo = (struct prefix_info *) opt;
@@ -1764,28 +1768,23 @@
 	 *	2) Configure prefixes with the auto flag set
 	 */
 
-	if (valid_lft == INFINITY_LIFE_TIME)
-		rt_expires = ~0UL;
-	else if (valid_lft >= 0x7FFFFFFF/HZ) {
+	if (pinfo->onlink) {
+		struct rt6_info *rt;
+		unsigned long rt_expires;
+
 		/* Avoid arithmetic overflow. Really, we could
 		 * save rt_expires in seconds, likely valid_lft,
 		 * but it would require division in fib gc, that it
 		 * not good.
 		 */
-		rt_expires = 0x7FFFFFFF - (0x7FFFFFFF % HZ);
-	} else
-		rt_expires = valid_lft * HZ;
+		if (HZ > USER_HZ)
+			rt_expires = addrconf_timeout_fixup(valid_lft, HZ);
+		else
+			rt_expires = addrconf_timeout_fixup(valid_lft, USER_HZ);
 
-	/*
-	 * We convert this (in jiffies) to clock_t later.
-	 * Avoid arithmetic overflow there as well.
-	 * Overflow can happen only if HZ < USER_HZ.
-	 */
-	if (HZ < USER_HZ && ~rt_expires && rt_expires > 0x7FFFFFFF / USER_HZ)
-		rt_expires = 0x7FFFFFFF / USER_HZ;
+		if (addrconf_finite_timeout(rt_expires))
+			rt_expires *= HZ;
 
-	if (pinfo->onlink) {
-		struct rt6_info *rt;
 		rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL,
 				dev->ifindex, 1);
 
@@ -1794,7 +1793,7 @@
 			if (valid_lft == 0) {
 				ip6_del_rt(rt);
 				rt = NULL;
-			} else if (~rt_expires) {
+			} else if (addrconf_finite_timeout(rt_expires)) {
 				/* not infinity */
 				rt->rt6i_expires = jiffies + rt_expires;
 				rt->rt6i_flags |= RTF_EXPIRES;
@@ -1803,9 +1802,9 @@
 				rt->rt6i_expires = 0;
 			}
 		} else if (valid_lft) {
-			int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
 			clock_t expires = 0;
-			if (~rt_expires) {
+			int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
+			if (addrconf_finite_timeout(rt_expires)) {
 				/* not infinity */
 				flags |= RTF_EXPIRES;
 				expires = jiffies_to_clock_t(rt_expires);
@@ -2027,7 +2026,7 @@
  *	Manual configuration of address on an interface
  */
 static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
-			  int plen, __u8 ifa_flags, __u32 prefered_lft,
+			  unsigned int plen, __u8 ifa_flags, __u32 prefered_lft,
 			  __u32 valid_lft)
 {
 	struct inet6_ifaddr *ifp;
@@ -2036,9 +2035,13 @@
 	int scope;
 	u32 flags;
 	clock_t expires;
+	unsigned long timeout;
 
 	ASSERT_RTNL();
 
+	if (plen > 128)
+		return -EINVAL;
+
 	/* check the lifetime */
 	if (!valid_lft || prefered_lft > valid_lft)
 		return -EINVAL;
@@ -2052,22 +2055,23 @@
 
 	scope = ipv6_addr_scope(pfx);
 
-	if (valid_lft == INFINITY_LIFE_TIME) {
-		ifa_flags |= IFA_F_PERMANENT;
-		flags = 0;
-		expires = 0;
-	} else {
-		if (valid_lft >= 0x7FFFFFFF/HZ)
-			valid_lft = 0x7FFFFFFF/HZ;
+	timeout = addrconf_timeout_fixup(valid_lft, HZ);
+	if (addrconf_finite_timeout(timeout)) {
+		expires = jiffies_to_clock_t(timeout * HZ);
+		valid_lft = timeout;
 		flags = RTF_EXPIRES;
-		expires = jiffies_to_clock_t(valid_lft * HZ);
+	} else {
+		expires = 0;
+		flags = 0;
+		ifa_flags |= IFA_F_PERMANENT;
 	}
 
-	if (prefered_lft == 0)
-		ifa_flags |= IFA_F_DEPRECATED;
-	else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
-		 (prefered_lft != INFINITY_LIFE_TIME))
-		prefered_lft = 0x7FFFFFFF/HZ;
+	timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+	if (addrconf_finite_timeout(timeout)) {
+		if (timeout == 0)
+			ifa_flags |= IFA_F_DEPRECATED;
+		prefered_lft = timeout;
+	}
 
 	ifp = ipv6_add_addr(idev, pfx, plen, scope, ifa_flags);
 
@@ -2095,12 +2099,15 @@
 }
 
 static int inet6_addr_del(struct net *net, int ifindex, struct in6_addr *pfx,
-			  int plen)
+			  unsigned int plen)
 {
 	struct inet6_ifaddr *ifp;
 	struct inet6_dev *idev;
 	struct net_device *dev;
 
+	if (plen > 128)
+		return -EINVAL;
+
 	dev = __dev_get_by_index(net, ifindex);
 	if (!dev)
 		return -ENODEV;
@@ -3169,26 +3176,28 @@
 {
 	u32 flags;
 	clock_t expires;
+	unsigned long timeout;
 
 	if (!valid_lft || (prefered_lft > valid_lft))
 		return -EINVAL;
 
-	if (valid_lft == INFINITY_LIFE_TIME) {
-		ifa_flags |= IFA_F_PERMANENT;
-		flags = 0;
-		expires = 0;
-	} else {
-		if (valid_lft >= 0x7FFFFFFF/HZ)
-			valid_lft = 0x7FFFFFFF/HZ;
+	timeout = addrconf_timeout_fixup(valid_lft, HZ);
+	if (addrconf_finite_timeout(timeout)) {
+		expires = jiffies_to_clock_t(timeout * HZ);
+		valid_lft = timeout;
 		flags = RTF_EXPIRES;
-		expires = jiffies_to_clock_t(valid_lft * HZ);
+	} else {
+		expires = 0;
+		flags = 0;
+		ifa_flags |= IFA_F_PERMANENT;
 	}
 
-	if (prefered_lft == 0)
-		ifa_flags |= IFA_F_DEPRECATED;
-	else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
-		 (prefered_lft != INFINITY_LIFE_TIME))
-		prefered_lft = 0x7FFFFFFF/HZ;
+	timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+	if (addrconf_finite_timeout(timeout)) {
+		if (timeout == 0)
+			ifa_flags |= IFA_F_DEPRECATED;
+		prefered_lft = timeout;
+	}
 
 	spin_lock_bh(&ifp->lock);
 	ifp->flags = (ifp->flags & ~(IFA_F_DEPRECATED | IFA_F_PERMANENT | IFA_F_NODAD | IFA_F_HOMEADDRESS)) | ifa_flags;
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 94fa6ae..b9c2de8 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -496,7 +496,8 @@
 	return 0;
 }
 
-int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
+int datagram_send_ctl(struct net *net,
+		      struct msghdr *msg, struct flowi *fl,
 		      struct ipv6_txoptions *opt,
 		      int *hlimit, int *tclass)
 {
@@ -509,7 +510,6 @@
 
 	for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) {
 		int addr_type;
-		struct net_device *dev = NULL;
 
 		if (!CMSG_OK(msg, cmsg)) {
 			err = -EINVAL;
@@ -522,6 +522,9 @@
 		switch (cmsg->cmsg_type) {
 		case IPV6_PKTINFO:
 		case IPV6_2292PKTINFO:
+		    {
+			struct net_device *dev = NULL;
+
 			if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct in6_pktinfo))) {
 				err = -EINVAL;
 				goto exit_f;
@@ -535,32 +538,32 @@
 				fl->oif = src_info->ipi6_ifindex;
 			}
 
-			addr_type = ipv6_addr_type(&src_info->ipi6_addr);
+			addr_type = __ipv6_addr_type(&src_info->ipi6_addr);
 
-			if (addr_type == IPV6_ADDR_ANY)
-				break;
+			if (fl->oif) {
+				dev = dev_get_by_index(net, fl->oif);
+				if (!dev)
+					return -ENODEV;
+			} else if (addr_type & IPV6_ADDR_LINKLOCAL)
+				return -EINVAL;
 
-			if (addr_type & IPV6_ADDR_LINKLOCAL) {
-				if (!src_info->ipi6_ifindex)
-					return -EINVAL;
-				else {
-					dev = dev_get_by_index(&init_net, src_info->ipi6_ifindex);
-					if (!dev)
-						return -ENODEV;
-				}
+			if (addr_type != IPV6_ADDR_ANY) {
+				int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
+				if (!ipv6_chk_addr(net, &src_info->ipi6_addr,
+						   strict ? dev : NULL, 0))
+					err = -EINVAL;
+				else
+					ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
 			}
-			if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
-					   dev, 0)) {
-				if (dev)
-					dev_put(dev);
-				err = -EINVAL;
-				goto exit_f;
-			}
+
 			if (dev)
 				dev_put(dev);
 
-			ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
+			if (err)
+				goto exit_f;
+
 			break;
+		    }
 
 		case IPV6_FLOWINFO:
 			if (cmsg->cmsg_len < CMSG_LEN(4)) {
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index eb7a9403..37a4e77 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -354,7 +354,7 @@
 		msg.msg_control = (void*)(fl->opt+1);
 		flowi.oif = 0;
 
-		err = datagram_send_ctl(&msg, &flowi, fl->opt, &junk, &junk);
+		err = datagram_send_ctl(net, &msg, &flowi, fl->opt, &junk, &junk);
 		if (err)
 			goto done;
 		err = -EINVAL;
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 2de3c46..1479618 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -197,7 +197,7 @@
 		const char *name = vif->dev ? vif->dev->name : "none";
 
 		seq_printf(seq,
-			   "%2Zd %-10s %8ld %7ld  %8ld %7ld %05X\n",
+			   "%2td %-10s %8ld %7ld  %8ld %7ld %05X\n",
 			   vif - vif6_table,
 			   name, vif->bytes_in, vif->pkt_in,
 			   vif->bytes_out, vif->pkt_out,
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 56d55fe..26b83e5 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -161,9 +161,17 @@
 			struct ipv6_txoptions *opt;
 			struct sk_buff *pktopt;
 
-			if (sk->sk_protocol != IPPROTO_UDP &&
-			    sk->sk_protocol != IPPROTO_UDPLITE &&
-			    sk->sk_protocol != IPPROTO_TCP)
+			if (sk->sk_type == SOCK_RAW)
+				break;
+
+			if (sk->sk_protocol == IPPROTO_UDP ||
+			    sk->sk_protocol == IPPROTO_UDPLITE) {
+				struct udp_sock *up = udp_sk(sk);
+				if (up->pending == AF_INET6) {
+					retv = -EBUSY;
+					break;
+				}
+			} else if (sk->sk_protocol != IPPROTO_TCP)
 				break;
 
 			if (sk->sk_state != TCP_ESTABLISHED) {
@@ -416,7 +424,7 @@
 		msg.msg_controllen = optlen;
 		msg.msg_control = (void*)(opt+1);
 
-		retv = datagram_send_ctl(&msg, &fl, opt, &junk, &junk);
+		retv = datagram_send_ctl(net, &msg, &fl, opt, &junk, &junk);
 		if (retv)
 			goto done;
 update:
@@ -832,7 +840,7 @@
 	len = min_t(unsigned int, len, ipv6_optlen(hdr));
 	if (copy_to_user(optval, hdr, len))
 		return -EFAULT;
-	return ipv6_optlen(hdr);
+	return len;
 }
 
 static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
@@ -975,6 +983,9 @@
 		len = ipv6_getsockopt_sticky(sk, np->opt,
 					     optname, optval, len);
 		release_sock(sk);
+		/* check if ipv6_getsockopt_sticky() returns err code */
+		if (len < 0)
+			return len;
 		return put_user(len, optlen);
 	}
 
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 2dccad4..e65e26e 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -209,7 +209,9 @@
 	arg.dst = dst;
 	hash = ip6qhashfn(id, src, dst);
 
+	local_bh_disable();
 	q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash);
+	local_bh_enable();
 	if (q == NULL)
 		goto oom;
 
@@ -638,10 +640,10 @@
 		goto ret_orig;
 	}
 
-	spin_lock(&fq->q.lock);
+	spin_lock_bh(&fq->q.lock);
 
 	if (nf_ct_frag6_queue(fq, clone, fhdr, nhoff) < 0) {
-		spin_unlock(&fq->q.lock);
+		spin_unlock_bh(&fq->q.lock);
 		pr_debug("Can't insert skb to queue\n");
 		fq_put(fq);
 		goto ret_orig;
@@ -653,7 +655,7 @@
 		if (ret_skb == NULL)
 			pr_debug("Can't reassemble fragmented packets\n");
 	}
-	spin_unlock(&fq->q.lock);
+	spin_unlock_bh(&fq->q.lock);
 
 	fq_put(fq);
 	return ret_skb;
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 232e0dc..8fee9a1 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -813,7 +813,7 @@
 		memset(opt, 0, sizeof(struct ipv6_txoptions));
 		opt->tot_len = sizeof(struct ipv6_txoptions);
 
-		err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+		err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
 		if (err < 0) {
 			fl6_sock_release(flowlabel);
 			return err;
@@ -1164,6 +1164,14 @@
 	sk_common_release(sk);
 }
 
+static int raw6_destroy(struct sock *sk)
+{
+	lock_sock(sk);
+	ip6_flush_pending_frames(sk);
+	release_sock(sk);
+	return 0;
+}
+
 static int rawv6_init_sk(struct sock *sk)
 {
 	struct raw6_sock *rp = raw6_sk(sk);
@@ -1187,6 +1195,7 @@
 	.name		   = "RAWv6",
 	.owner		   = THIS_MODULE,
 	.close		   = rawv6_close,
+	.destroy	   = raw6_destroy,
 	.connect	   = ip6_datagram_connect,
 	.disconnect	   = udp_disconnect,
 	.ioctl		   = rawv6_ioctl,
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 48534c6..220cffe 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -446,7 +446,7 @@
 	struct route_info *rinfo = (struct route_info *) opt;
 	struct in6_addr prefix_buf, *prefix;
 	unsigned int pref;
-	u32 lifetime;
+	unsigned long lifetime;
 	struct rt6_info *rt;
 
 	if (len < sizeof(struct route_info)) {
@@ -472,13 +472,7 @@
 	if (pref == ICMPV6_ROUTER_PREF_INVALID)
 		pref = ICMPV6_ROUTER_PREF_MEDIUM;
 
-	lifetime = ntohl(rinfo->lifetime);
-	if (lifetime == 0xffffffff) {
-		/* infinity */
-	} else if (lifetime > 0x7fffffff/HZ - 1) {
-		/* Avoid arithmetic overflow */
-		lifetime = 0x7fffffff/HZ - 1;
-	}
+	lifetime = addrconf_timeout_fixup(ntohl(rinfo->lifetime), HZ);
 
 	if (rinfo->length == 3)
 		prefix = (struct in6_addr *)rinfo->prefix;
@@ -506,7 +500,7 @@
 				 (rt->rt6i_flags & ~RTF_PREF_MASK) | RTF_PREF(pref);
 
 	if (rt) {
-		if (lifetime == 0xffffffff) {
+		if (!addrconf_finite_timeout(lifetime)) {
 			rt->rt6i_flags &= ~RTF_EXPIRES;
 		} else {
 			rt->rt6i_expires = jiffies + HZ * lifetime;
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 5a6fab9..3de6ffd 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -403,9 +403,8 @@
 
 static int ipip6_err(struct sk_buff *skb, u32 info)
 {
-#ifndef I_WISH_WORLD_WERE_PERFECT
 
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
    8 bytes of packet payload. It means, that precise relaying of
    ICMP in the real Internet is absolutely infeasible.
  */
@@ -462,92 +461,6 @@
 out:
 	read_unlock(&ipip6_lock);
 	return err;
-#else
-	struct iphdr *iph = (struct iphdr*)dp;
-	int hlen = iph->ihl<<2;
-	struct ipv6hdr *iph6;
-	const int type = icmp_hdr(skb)->type;
-	const int code = icmp_hdr(skb)->code;
-	int rel_type = 0;
-	int rel_code = 0;
-	int rel_info = 0;
-	struct sk_buff *skb2;
-	struct rt6_info *rt6i;
-
-	if (len < hlen + sizeof(struct ipv6hdr))
-		return;
-	iph6 = (struct ipv6hdr*)(dp + hlen);
-
-	switch (type) {
-	default:
-		return;
-	case ICMP_PARAMETERPROB:
-		if (icmp_hdr(skb)->un.gateway < hlen)
-			return;
-
-		/* So... This guy found something strange INSIDE encapsulated
-		   packet. Well, he is fool, but what can we do ?
-		 */
-		rel_type = ICMPV6_PARAMPROB;
-		rel_info = icmp_hdr(skb)->un.gateway - hlen;
-		break;
-
-	case ICMP_DEST_UNREACH:
-		switch (code) {
-		case ICMP_SR_FAILED:
-		case ICMP_PORT_UNREACH:
-			/* Impossible event. */
-			return;
-		case ICMP_FRAG_NEEDED:
-			/* Too complicated case ... */
-			return;
-		default:
-			/* All others are translated to HOST_UNREACH.
-			   rfc2003 contains "deep thoughts" about NET_UNREACH,
-			   I believe, it is just ether pollution. --ANK
-			 */
-			rel_type = ICMPV6_DEST_UNREACH;
-			rel_code = ICMPV6_ADDR_UNREACH;
-			break;
-		}
-		break;
-	case ICMP_TIME_EXCEEDED:
-		if (code != ICMP_EXC_TTL)
-			return;
-		rel_type = ICMPV6_TIME_EXCEED;
-		rel_code = ICMPV6_EXC_HOPLIMIT;
-		break;
-	}
-
-	/* Prepare fake skb to feed it to icmpv6_send */
-	skb2 = skb_clone(skb, GFP_ATOMIC);
-	if (skb2 == NULL)
-		return 0;
-	dst_release(skb2->dst);
-	skb2->dst = NULL;
-	skb_pull(skb2, skb->data - (u8*)iph6);
-	skb_reset_network_header(skb2);
-
-	/* Try to guess incoming interface */
-	rt6i = rt6_lookup(dev_net(skb->dev), &iph6->saddr, NULL, NULL, 0);
-	if (rt6i && rt6i->rt6i_dev) {
-		skb2->dev = rt6i->rt6i_dev;
-
-		rt6i = rt6_lookup(dev_net(skb->dev),
-				&iph6->daddr, &iph6->saddr, NULL, 0);
-
-		if (rt6i && rt6i->rt6i_dev && rt6i->rt6i_dev->type == ARPHRD_SIT) {
-			struct ip_tunnel *t = netdev_priv(rt6i->rt6i_dev);
-			if (rel_type == ICMPV6_TIME_EXCEED && t->parms.iph.ttl) {
-				rel_type = ICMPV6_DEST_UNREACH;
-				rel_code = ICMPV6_ADDR_UNREACH;
-			}
-			icmpv6_send(skb2, rel_type, rel_code, rel_info, skb2->dev);
-		}
-	}
-	kfree_skb(skb2);
-	return 0;
-#endif
 }
 
 static inline void ipip6_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c
index 6323921..669f280 100644
--- a/net/ipv6/tunnel6.c
+++ b/net/ipv6/tunnel6.c
@@ -109,7 +109,7 @@
 {
 	struct xfrm6_tunnel *handler;
 
-	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
+	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
 		goto drop;
 
 	for (handler = tunnel46_handlers; handler; handler = handler->next)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 1fd784f..dd30962 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -534,7 +534,9 @@
 {
 	struct udp_sock *up = udp_sk(sk);
 
-	if (up->pending) {
+	if (up->pending == AF_INET)
+		udp_flush_pending_frames(sk);
+	else if (up->pending) {
 		up->len = 0;
 		up->pending = 0;
 		ip6_flush_pending_frames(sk);
@@ -731,7 +733,7 @@
 		memset(opt, 0, sizeof(struct ipv6_txoptions));
 		opt->tot_len = sizeof(*opt);
 
-		err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+		err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
 		if (err < 0) {
 			fl6_sock_release(flowlabel);
 			return err;
@@ -848,12 +850,14 @@
 		} else {
 			dst_release(dst);
 		}
+		dst = NULL;
 	}
 
 	if (err > 0)
 		err = np->recverr ? net_xmit_errno(err) : 0;
 	release_sock(sk);
 out:
+	dst_release(dst);
 	fl6_sock_release(flowlabel);
 	if (!err)
 		return len;
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index ae54b20..3eb5bcc 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1093,11 +1093,6 @@
 
 	init_waitqueue_head(&self->query_wait);
 
-	/* Initialise networking socket struct */
-	sock_init_data(sock, sk);	/* Note : set sk->sk_refcnt to 1 */
-	sk->sk_family = PF_IRDA;
-	sk->sk_protocol = protocol;
-
 	switch (sock->type) {
 	case SOCK_STREAM:
 		sock->ops = &irda_stream_ops;
@@ -1124,13 +1119,20 @@
 			self->max_sdu_size_rx = TTP_SAR_UNBOUND;
 			break;
 		default:
+			sk_free(sk);
 			return -ESOCKTNOSUPPORT;
 		}
 		break;
 	default:
+		sk_free(sk);
 		return -ESOCKTNOSUPPORT;
 	}
 
+	/* Initialise networking socket struct */
+	sock_init_data(sock, sk);	/* Note : set sk->sk_refcnt to 1 */
+	sk->sk_family = PF_IRDA;
+	sk->sk_protocol = protocol;
+
 	/* Register as a client with IrLMP */
 	self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
 	self->mask.word = 0xffff;
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 9e7236f..9bba7ac 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1251,7 +1251,7 @@
 		x->sel.prefixlen_s = addr->sadb_address_prefixlen;
 	}
 
-	if (x->props.mode == XFRM_MODE_TRANSPORT)
+	if (!x->sel.family)
 		x->sel.family = x->props.family;
 
 	if (ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]) {
diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c
index e2ddde7..008de1f 100644
--- a/net/llc/llc_sap.c
+++ b/net/llc/llc_sap.c
@@ -286,12 +286,14 @@
  *
  *	Sends received pdus to the sap state machine.
  */
-static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb)
+static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb,
+			struct sock *sk)
 {
 	struct llc_sap_state_ev *ev = llc_sap_ev(skb);
 
 	ev->type   = LLC_SAP_EV_TYPE_PDU;
 	ev->reason = 0;
+	skb->sk = sk;
 	llc_sap_state_process(sap, skb);
 }
 
@@ -360,8 +362,7 @@
 			break;
 
 		sock_hold(sk);
-		skb_set_owner_r(skb1, sk);
-		llc_sap_rcv(sap, skb1);
+		llc_sap_rcv(sap, skb1, sk);
 		sock_put(sk);
 	}
 	read_unlock_bh(&sap->sk_list.lock);
@@ -381,8 +382,7 @@
 	} else {
 		struct sock *sk = llc_lookup_dgram(sap, &laddr);
 		if (sk) {
-			skb_set_owner_r(skb, sk);
-			llc_sap_rcv(sap, skb);
+			llc_sap_rcv(sap, skb, sk);
 			sock_put(sk);
 		} else
 			kfree_skb(skb);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 699d97b..a9fce4a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -672,7 +672,7 @@
 	if (params->vlan) {
 		sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
 
-		if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+		if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
 		    sdata->vif.type != IEEE80211_IF_TYPE_AP)
 			return -EINVAL;
 	} else
@@ -760,7 +760,7 @@
 	if (params->vlan && params->vlan != sta->sdata->dev) {
 		vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
 
-		if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+		if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
 		    vlansdata->vif.type != IEEE80211_IF_TYPE_AP) {
 			rcu_read_unlock();
 			return -EINVAL;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 915afad..5c87645 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1313,7 +1313,7 @@
 	/*
 	 * Clear the TX filter mask for this STA when sending the next
 	 * packet. If the STA went to power save mode, this will happen
-	 * happen when it wakes up for the next time.
+	 * when it wakes up for the next time.
 	 */
 	sta->flags |= WLAN_STA_CLEAR_PS_FILT;
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e470bf1..841278f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -730,7 +730,17 @@
 		if (bss->wmm_ie) {
 			wmm = 1;
 		}
+
+		/* get all rates supported by the device and the AP as
+		 * some APs don't like getting a superset of their rates
+		 * in the association request (e.g. D-Link DAP 1353 in
+		 * b-only mode) */
+		rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+
 		ieee80211_rx_bss_put(dev, bss);
+	} else {
+		rates = ~0;
+		rates_len = sband->n_bitrates;
 	}
 
 	mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
@@ -761,10 +771,7 @@
 	*pos++ = ifsta->ssid_len;
 	memcpy(pos, ifsta->ssid, ifsta->ssid_len);
 
-	/* all supported rates should be added here but some APs
-	 * (e.g. D-Link DAP 1353 in b-only mode) don't like that
-	 * Therefore only add rates the AP supports */
-	rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+	/* add all rates which were marked to be used above */
 	supp_rates_len = rates_len;
 	if (supp_rates_len > 8)
 		supp_rates_len = 8;
@@ -1318,7 +1325,7 @@
 
 	/* prepare reordering buffer */
 	tid_agg_rx->reorder_buf =
-		kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+		kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
 	if (!tid_agg_rx->reorder_buf) {
 		if (net_ratelimit())
 			printk(KERN_ERR "can not allocate reordering buffer "
@@ -1327,7 +1334,7 @@
 		goto end;
 	}
 	memset(tid_agg_rx->reorder_buf, 0,
-		buf_size * sizeof(struct sk_buf *));
+		buf_size * sizeof(struct sk_buff *));
 
 	if (local->ops->ampdu_action)
 		ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
@@ -1607,7 +1614,7 @@
 	 * only one argument, and both sta_info and TID are needed, so init
 	 * flow in sta_info_create gives the TID as data, while the timer_to_id
 	 * array gives the sta through container_of */
-	u16 tid = *(int *)data;
+	u16 tid = *(u8 *)data;
 	struct sta_info *temp_sta = container_of((void *)data,
 		struct sta_info, timer_to_tid[tid]);
 
@@ -1655,7 +1662,7 @@
 void sta_rx_agg_session_timer_expired(unsigned long data)
 {
 	/* not an elegant detour, but there is no choice as the timer passes
-	 * only one argument, and verious sta_info are needed here, so init
+	 * only one argument, and various sta_info are needed here, so init
 	 * flow in sta_info_create gives the TID as data, while the timer_to_id
 	 * array gives the sta through container_of */
 	u8 *ptid = (u8 *)data;
@@ -2472,8 +2479,6 @@
 	ifsta->state = IEEE80211_IBSS_JOINED;
 	mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
 
-	ieee80211_rx_bss_put(dev, bss);
-
 	return res;
 }
 
@@ -3516,6 +3521,7 @@
 	struct ieee80211_supported_band *sband;
 	u8 bssid[ETH_ALEN], *pos;
 	int i;
+	int ret;
 	DECLARE_MAC_BUF(mac);
 
 #if 0
@@ -3560,7 +3566,9 @@
 		*pos++ = (u8) (rate / 5);
 	}
 
-	return ieee80211_sta_join_ibss(dev, ifsta, bss);
+	ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+	ieee80211_rx_bss_put(dev, bss);
+	return ret;
 }
 
 
@@ -3608,10 +3616,13 @@
 	    (bss = ieee80211_rx_bss_get(dev, bssid,
 					local->hw.conf.channel->center_freq,
 					ifsta->ssid, ifsta->ssid_len))) {
+		int ret;
 		printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
 		       " based on configured SSID\n",
 		       dev->name, print_mac(mac, bssid));
-		return ieee80211_sta_join_ibss(dev, ifsta, bss);
+		ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+		ieee80211_rx_bss_put(dev, bss);
+		return ret;
 	}
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	printk(KERN_DEBUG "   did not try to join ibss\n");
@@ -4088,19 +4099,18 @@
 
 	memset(&iwe, 0, sizeof(iwe));
 	iwe.cmd = SIOCGIWFREQ;
-	iwe.u.freq.m = bss->freq;
-	iwe.u.freq.e = 6;
-	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
-					  IW_EV_FREQ_LEN);
-
-	memset(&iwe, 0, sizeof(iwe));
-	iwe.cmd = SIOCGIWFREQ;
 	iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
 	iwe.u.freq.e = 0;
 	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
 					  IW_EV_FREQ_LEN);
 
 	memset(&iwe, 0, sizeof(iwe));
+	iwe.cmd = SIOCGIWFREQ;
+	iwe.u.freq.m = bss->freq;
+	iwe.u.freq.e = 6;
+	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
+					  IW_EV_FREQ_LEN);
+	memset(&iwe, 0, sizeof(iwe));
 	iwe.cmd = IWEVQUAL;
 	iwe.u.qual.qual = bss->signal;
 	iwe.u.qual.level = bss->rssi;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 1958bfb3..0941e5d 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1091,7 +1091,7 @@
 	u16 fc, hdrlen, ethertype;
 	u8 *payload;
 	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN];
+	u8 src[ETH_ALEN] __aligned(2);
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	DECLARE_MAC_BUF(mac);
@@ -1234,7 +1234,7 @@
  */
 static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx)
 {
-	static const u8 pae_group_addr[ETH_ALEN]
+	static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
 		= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
 	struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
 
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 131e9e6..4e97b26 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -34,11 +34,11 @@
 
 /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
 /* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-const unsigned char rfc1042_header[] =
+const unsigned char rfc1042_header[] __aligned(2) =
 	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
 
 /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-const unsigned char bridge_tunnel_header[] =
+const unsigned char bridge_tunnel_header[] __aligned(2) =
 	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
 
 
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 76e1de1..8311bb2 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -209,7 +209,6 @@
 	range->num_frequency = c;
 
 	IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
-	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
 	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
 	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
 
@@ -490,9 +489,14 @@
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
 	    sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
-		ap_addr->sa_family = ARPHRD_ETHER;
-		memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
-		return 0;
+		if (sdata->u.sta.state == IEEE80211_ASSOCIATED) {
+			ap_addr->sa_family = ARPHRD_ETHER;
+			memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
+			return 0;
+		} else {
+			memset(&ap_addr->sa_data, 0, ETH_ALEN);
+			return 0;
+		}
 	} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
 		ap_addr->sa_family = ARPHRD_ETHER;
 		memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index e31beeb..e8f0dea 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -587,10 +587,10 @@
 	return 0;
 
 err3:
+	kmem_cache_destroy(nf_ct_expect_cachep);
+err2:
 	nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc,
 			     nf_ct_expect_hsize);
-err2:
-	kmem_cache_destroy(nf_ct_expect_cachep);
 err1:
 	return err;
 }
diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c
index 2e89a00..70907f6b 100644
--- a/net/netfilter/xt_connlimit.c
+++ b/net/netfilter/xt_connlimit.c
@@ -73,7 +73,8 @@
 static inline bool already_closed(const struct nf_conn *conn)
 {
 	if (nf_ct_protonum(conn) == IPPROTO_TCP)
-		return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT;
+		return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT ||
+		       conn->proto.tcp.state == TCP_CONNTRACK_CLOSE;
 	else
 		return 0;
 }
diff --git a/net/netlink/attr.c b/net/netlink/attr.c
index feb326f..47bbf45 100644
--- a/net/netlink/attr.c
+++ b/net/netlink/attr.c
@@ -400,13 +400,13 @@
  * @attrlen: length of attribute payload
  * @data: head of attribute payload
  *
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
  * the attribute header and payload.
  */
 int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data)
 {
 	if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
-		return -1;
+		return -EMSGSIZE;
 
 	__nla_put(skb, attrtype, attrlen, data);
 	return 0;
@@ -418,13 +418,13 @@
  * @attrlen: length of attribute payload
  * @data: head of attribute payload
  *
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
  * the attribute payload.
  */
 int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
 {
 	if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
-		return -1;
+		return -EMSGSIZE;
 
 	__nla_put_nohdr(skb, attrlen, data);
 	return 0;
@@ -436,13 +436,13 @@
  * @attrlen: length of attribute payload
  * @data: head of attribute payload
  *
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
  * the attribute payload.
  */
 int nla_append(struct sk_buff *skb, int attrlen, const void *data)
 {
 	if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
-		return -1;
+		return -EMSGSIZE;
 
 	memcpy(skb_put(skb, attrlen), data, attrlen);
 	return 0;
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index d16929c..f5aa23c 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -554,7 +554,8 @@
 	return genlmsg_end(skb, hdr);
 
 nla_put_failure:
-	return genlmsg_cancel(skb, hdr);
+	genlmsg_cancel(skb, hdr);
+	return -EMSGSIZE;
 }
 
 static int ctrl_fill_mcgrp_info(struct genl_multicast_group *grp, u32 pid,
@@ -590,7 +591,8 @@
 	return genlmsg_end(skb, hdr);
 
 nla_put_failure:
-	return genlmsg_cancel(skb, hdr);
+	genlmsg_cancel(skb, hdr);
+	return -EMSGSIZE;
 }
 
 static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb)
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 0df911f..64465ba 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -444,7 +444,8 @@
 	return nla_nest_end(skb, opts);
 
 nla_put_failure:
-	return nla_nest_cancel(skb, opts);
+	nla_nest_cancel(skb, opts);
+	return -EMSGSIZE;
 }
 
 static int dsmark_dump(struct Qdisc *sch, struct sk_buff *skb)
@@ -466,7 +467,8 @@
 	return nla_nest_end(skb, opts);
 
 nla_put_failure:
-	return nla_nest_cancel(skb, opts);
+	nla_nest_cancel(skb, opts);
+	return -EMSGSIZE;
 }
 
 static const struct Qdisc_class_ops dsmark_class_ops = {
diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index 3a9d226..c89fba5 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -582,7 +582,8 @@
 	return nla_nest_end(skb, opts);
 
 nla_put_failure:
-	return nla_nest_cancel(skb, opts);
+	nla_nest_cancel(skb, opts);
+	return -EMSGSIZE;
 }
 
 static void gred_destroy(struct Qdisc *sch)
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 87293d0..fdfaa3f 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1360,7 +1360,7 @@
 
  nla_put_failure:
 	nla_nest_cancel(skb, nest);
-	return -1;
+	return -EMSGSIZE;
 }
 
 static int
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 3dcd493f4..5c56985 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -281,7 +281,8 @@
 	return nla_nest_end(skb, opts);
 
 nla_put_failure:
-	return nla_nest_cancel(skb, opts);
+	nla_nest_cancel(skb, opts);
+	return -EMSGSIZE;
 }
 
 static int red_dump_stats(struct Qdisc *sch, struct gnet_dump *d)
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index b4cd2b7..5326348 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1203,6 +1203,9 @@
 	struct list_head *head = &asoc->peer.transport_addr_list;
 	struct list_head *pos;
 
+	if (asoc->peer.transport_count == 1)
+		return;
+
 	/* Find the next transport in a round-robin fashion. */
 	t = asoc->peer.retran_path;
 	pos = &t->transports;
@@ -1217,6 +1220,15 @@
 
 		t = list_entry(pos, struct sctp_transport, transports);
 
+		/* We have exhausted the list, but didn't find any
+		 * other active transports.  If so, use the next
+		 * transport.
+		 */
+		if (t == asoc->peer.retran_path) {
+			t = next;
+			break;
+		}
+
 		/* Try to find an active transport. */
 
 		if ((t->state == SCTP_ACTIVE) ||
@@ -1229,15 +1241,6 @@
 			if (!next)
 				next = t;
 		}
-
-		/* We have exhausted the list, but didn't find any
-		 * other active transports.  If so, use the next
-		 * transport.
-		 */
-		if (t == asoc->peer.retran_path) {
-			t = next;
-			break;
-		}
 	}
 
 	asoc->peer.retran_path = t;
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index e45e44c..a2f4d4d 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -299,7 +299,8 @@
 /* Fills in the source address(saddr) based on the destination address(daddr)
  * and asoc's bind address list.
  */
-static void sctp_v6_get_saddr(struct sctp_association *asoc,
+static void sctp_v6_get_saddr(struct sctp_sock *sk,
+			      struct sctp_association *asoc,
 			      struct dst_entry *dst,
 			      union sctp_addr *daddr,
 			      union sctp_addr *saddr)
@@ -318,7 +319,7 @@
 	if (!asoc) {
 		ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
 				   &daddr->v6.sin6_addr,
-				   inet6_sk(asoc->base.sk)->srcprefs,
+				   inet6_sk(&sk->inet.sk)->srcprefs,
 				   &saddr->v6.sin6_addr);
 		SCTP_DEBUG_PRINTK("saddr from ipv6_get_saddr: " NIP6_FMT "\n",
 				  NIP6(saddr->v6.sin6_addr));
@@ -726,6 +727,11 @@
 	seq_printf(seq, NIP6_FMT " ", NIP6(addr->v6.sin6_addr));
 }
 
+static void sctp_v6_ecn_capable(struct sock *sk)
+{
+	inet6_sk(sk)->tclass |= INET_ECN_ECT_0;
+}
+
 /* Initialize a PF_INET6 socket msg_name. */
 static void sctp_inet6_msgname(char *msgname, int *addr_len)
 {
@@ -996,6 +1002,7 @@
 	.skb_iif	   = sctp_v6_skb_iif,
 	.is_ce		   = sctp_v6_is_ce,
 	.seq_dump_addr	   = sctp_v6_seq_dump_addr,
+	.ecn_capable	   = sctp_v6_ecn_capable,
 	.net_header_len	   = sizeof(struct ipv6hdr),
 	.sockaddr_len	   = sizeof(struct sockaddr_in6),
 #ifdef CONFIG_COMPAT
diff --git a/net/sctp/output.c b/net/sctp/output.c
index cf4f9fb..6d45bae 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -548,7 +548,7 @@
 	 * Note: The works for IPv6 layer checks this bit too later
 	 * in transmission.  See IP6_ECN_flow_xmit().
 	 */
-	INET_ECN_xmit(nskb->sk);
+	(*tp->af_specific->ecn_capable)(nskb->sk);
 
 	/* Set up the IP options.  */
 	/* BUG: not implemented
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 59edfd2..ace6770 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -208,6 +208,7 @@
 	INIT_LIST_HEAD(&q->sacked);
 	INIT_LIST_HEAD(&q->abandoned);
 
+	q->fast_rtx = 0;
 	q->outstanding_bytes = 0;
 	q->empty = 1;
 	q->cork  = 0;
@@ -500,6 +501,7 @@
 	case SCTP_RTXR_FAST_RTX:
 		SCTP_INC_STATS(SCTP_MIB_FAST_RETRANSMITS);
 		sctp_transport_lower_cwnd(transport, SCTP_LOWER_CWND_FAST_RTX);
+		q->fast_rtx = 1;
 		break;
 	case SCTP_RTXR_PMTUD:
 		SCTP_INC_STATS(SCTP_MIB_PMTUD_RETRANSMITS);
@@ -518,9 +520,15 @@
 	 * the sender SHOULD try to advance the "Advanced.Peer.Ack.Point" by
 	 * following the procedures outlined in C1 - C5.
 	 */
-	sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
+	if (reason == SCTP_RTXR_T3_RTX)
+		sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
 
-	error = sctp_outq_flush(q, /* rtx_timeout */ 1);
+	/* Flush the queues only on timeout, since fast_rtx is only
+	 * triggered during sack processing and the queue
+	 * will be flushed at the end.
+	 */
+	if (reason != SCTP_RTXR_FAST_RTX)
+		error = sctp_outq_flush(q, /* rtx_timeout */ 1);
 
 	if (error)
 		q->asoc->base.sk->sk_err = -error;
@@ -538,17 +546,23 @@
 			       int rtx_timeout, int *start_timer)
 {
 	struct list_head *lqueue;
-	struct list_head *lchunk;
 	struct sctp_transport *transport = pkt->transport;
 	sctp_xmit_t status;
 	struct sctp_chunk *chunk, *chunk1;
 	struct sctp_association *asoc;
+	int fast_rtx;
 	int error = 0;
+	int timer = 0;
+	int done = 0;
 
 	asoc = q->asoc;
 	lqueue = &q->retransmit;
+	fast_rtx = q->fast_rtx;
 
-	/* RFC 2960 6.3.3 Handle T3-rtx Expiration
+	/* This loop handles time-out retransmissions, fast retransmissions,
+	 * and retransmissions due to opening of whindow.
+	 *
+	 * RFC 2960 6.3.3 Handle T3-rtx Expiration
 	 *
 	 * E3) Determine how many of the earliest (i.e., lowest TSN)
 	 * outstanding DATA chunks for the address for which the
@@ -563,12 +577,12 @@
 	 * [Just to be painfully clear, if we are retransmitting
 	 * because a timeout just happened, we should send only ONE
 	 * packet of retransmitted data.]
+	 *
+	 * For fast retransmissions we also send only ONE packet.  However,
+	 * if we are just flushing the queue due to open window, we'll
+	 * try to send as much as possible.
 	 */
-	lchunk = sctp_list_dequeue(lqueue);
-
-	while (lchunk) {
-		chunk = list_entry(lchunk, struct sctp_chunk,
-				   transmitted_list);
+	list_for_each_entry_safe(chunk, chunk1, lqueue, transmitted_list) {
 
 		/* Make sure that Gap Acked TSNs are not retransmitted.  A
 		 * simple approach is just to move such TSNs out of the
@@ -576,58 +590,60 @@
 		 * next chunk.
 		 */
 		if (chunk->tsn_gap_acked) {
-			list_add_tail(lchunk, &transport->transmitted);
-			lchunk = sctp_list_dequeue(lqueue);
+			list_del(&chunk->transmitted_list);
+			list_add_tail(&chunk->transmitted_list,
+					&transport->transmitted);
 			continue;
 		}
 
+		/* If we are doing fast retransmit, ignore non-fast_rtransmit
+		 * chunks
+		 */
+		if (fast_rtx && !chunk->fast_retransmit)
+			continue;
+
 		/* Attempt to append this chunk to the packet. */
 		status = sctp_packet_append_chunk(pkt, chunk);
 
 		switch (status) {
 		case SCTP_XMIT_PMTU_FULL:
 			/* Send this packet.  */
-			if ((error = sctp_packet_transmit(pkt)) == 0)
-				*start_timer = 1;
+			error = sctp_packet_transmit(pkt);
 
 			/* If we are retransmitting, we should only
 			 * send a single packet.
 			 */
-			if (rtx_timeout) {
-				list_add(lchunk, lqueue);
-				lchunk = NULL;
-			}
+			if (rtx_timeout || fast_rtx)
+				done = 1;
 
-			/* Bundle lchunk in the next round.  */
+			/* Bundle next chunk in the next round.  */
 			break;
 
 		case SCTP_XMIT_RWND_FULL:
 			/* Send this packet. */
-			if ((error = sctp_packet_transmit(pkt)) == 0)
-				*start_timer = 1;
+			error = sctp_packet_transmit(pkt);
 
 			/* Stop sending DATA as there is no more room
 			 * at the receiver.
 			 */
-			list_add(lchunk, lqueue);
-			lchunk = NULL;
+			done = 1;
 			break;
 
 		case SCTP_XMIT_NAGLE_DELAY:
 			/* Send this packet. */
-			if ((error = sctp_packet_transmit(pkt)) == 0)
-				*start_timer = 1;
+			error = sctp_packet_transmit(pkt);
 
 			/* Stop sending DATA because of nagle delay. */
-			list_add(lchunk, lqueue);
-			lchunk = NULL;
+			done = 1;
 			break;
 
 		default:
 			/* The append was successful, so add this chunk to
 			 * the transmitted list.
 			 */
-			list_add_tail(lchunk, &transport->transmitted);
+			list_del(&chunk->transmitted_list);
+			list_add_tail(&chunk->transmitted_list,
+					&transport->transmitted);
 
 			/* Mark the chunk as ineligible for fast retransmit
 			 * after it is retransmitted.
@@ -635,27 +651,44 @@
 			if (chunk->fast_retransmit > 0)
 				chunk->fast_retransmit = -1;
 
-			*start_timer = 1;
-			q->empty = 0;
+			/* Force start T3-rtx timer when fast retransmitting
+			 * the earliest outstanding TSN
+			 */
+			if (!timer && fast_rtx &&
+			    ntohl(chunk->subh.data_hdr->tsn) ==
+					     asoc->ctsn_ack_point + 1)
+				timer = 2;
 
-			/* Retrieve a new chunk to bundle. */
-			lchunk = sctp_list_dequeue(lqueue);
+			q->empty = 0;
 			break;
 		}
 
-		/* If we are here due to a retransmit timeout or a fast
-		 * retransmit and if there are any chunks left in the retransmit
-		 * queue that could not fit in the PMTU sized packet, they need
-		 * to be marked as ineligible for a subsequent fast retransmit.
-		 */
-		if (rtx_timeout && !lchunk) {
-			list_for_each_entry(chunk1, lqueue, transmitted_list) {
-				if (chunk1->fast_retransmit > 0)
-					chunk1->fast_retransmit = -1;
-			}
+		/* Set the timer if there were no errors */
+		if (!error && !timer)
+			timer = 1;
+
+		if (done)
+			break;
+	}
+
+	/* If we are here due to a retransmit timeout or a fast
+	 * retransmit and if there are any chunks left in the retransmit
+	 * queue that could not fit in the PMTU sized packet, they need
+	 * to be marked as ineligible for a subsequent fast retransmit.
+	 */
+	if (rtx_timeout || fast_rtx) {
+		list_for_each_entry(chunk1, lqueue, transmitted_list) {
+			if (chunk1->fast_retransmit > 0)
+				chunk1->fast_retransmit = -1;
 		}
 	}
 
+	*start_timer = timer;
+
+	/* Clear fast retransmit hint */
+	if (fast_rtx)
+		q->fast_rtx = 0;
+
 	return error;
 }
 
@@ -862,7 +895,8 @@
 						    rtx_timeout, &start_timer);
 
 			if (start_timer)
-				sctp_transport_reset_timers(transport);
+				sctp_transport_reset_timers(transport,
+							    start_timer-1);
 
 			/* This can happen on COOKIE-ECHO resend.  Only
 			 * one chunk can get bundled with a COOKIE-ECHO.
@@ -977,7 +1011,7 @@
 			list_add_tail(&chunk->transmitted_list,
 				      &transport->transmitted);
 
-			sctp_transport_reset_timers(transport);
+			sctp_transport_reset_timers(transport, start_timer-1);
 
 			q->empty = 0;
 
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 0ec234b..b435a19 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -470,11 +470,11 @@
 		/* Walk through the bind address list and look for a bind
 		 * address that matches the source address of the returned dst.
 		 */
+		sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
 		rcu_read_lock();
 		list_for_each_entry_rcu(laddr, &bp->address_list, list) {
 			if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
 				continue;
-			sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
 			if (sctp_v4_cmp_addr(&dst_saddr, &laddr->a))
 				goto out_unlock;
 		}
@@ -519,7 +519,8 @@
 /* For v4, the source address is cached in the route entry(dst). So no need
  * to cache it separately and hence this is an empty routine.
  */
-static void sctp_v4_get_saddr(struct sctp_association *asoc,
+static void sctp_v4_get_saddr(struct sctp_sock *sk,
+			      struct sctp_association *asoc,
 			      struct dst_entry *dst,
 			      union sctp_addr *daddr,
 			      union sctp_addr *saddr)
@@ -616,6 +617,11 @@
 	seq_printf(seq, "%d.%d.%d.%d ", NIPQUAD(addr->v4.sin_addr));
 }
 
+static void sctp_v4_ecn_capable(struct sock *sk)
+{
+	INET_ECN_xmit(sk);
+}
+
 /* Event handler for inet address addition/deletion events.
  * The sctp_local_addr_list needs to be protocted by a spin lock since
  * multiple notifiers (say IPv4 and IPv6) may be running at the same
@@ -934,6 +940,7 @@
 	.skb_iif	   = sctp_v4_skb_iif,
 	.is_ce		   = sctp_v4_is_ce,
 	.seq_dump_addr	   = sctp_v4_seq_dump_addr,
+	.ecn_capable	   = sctp_v4_ecn_capable,
 	.net_header_len	   = sizeof(struct iphdr),
 	.sockaddr_len	   = sizeof(struct sockaddr_in),
 #ifdef CONFIG_COMPAT
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index f4938f6..3f34f61 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -79,6 +79,7 @@
 	peer->rttvar = 0;
 	peer->srtt = 0;
 	peer->rto_pending = 0;
+	peer->fast_recovery = 0;
 
 	peer->last_time_heard = jiffies;
 	peer->last_time_used = jiffies;
@@ -190,7 +191,7 @@
 /* Start T3_rtx timer if it is not already running and update the heartbeat
  * timer.  This routine is called every time a DATA chunk is sent.
  */
-void sctp_transport_reset_timers(struct sctp_transport *transport)
+void sctp_transport_reset_timers(struct sctp_transport *transport, int force)
 {
 	/* RFC 2960 6.3.2 Retransmission Timer Rules
 	 *
@@ -200,7 +201,7 @@
 	 * address.
 	 */
 
-	if (!timer_pending(&transport->T3_rtx_timer))
+	if (force || !timer_pending(&transport->T3_rtx_timer))
 		if (!mod_timer(&transport->T3_rtx_timer,
 			       jiffies + transport->rto))
 			sctp_transport_hold(transport);
@@ -291,7 +292,7 @@
 	if (saddr)
 		memcpy(&transport->saddr, saddr, sizeof(union sctp_addr));
 	else
-		af->get_saddr(asoc, dst, daddr, &transport->saddr);
+		af->get_saddr(opt, asoc, dst, daddr, &transport->saddr);
 
 	transport->dst = dst;
 	if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) {
@@ -403,11 +404,16 @@
 	cwnd = transport->cwnd;
 	flight_size = transport->flight_size;
 
+	/* See if we need to exit Fast Recovery first */
+	if (transport->fast_recovery &&
+	    TSN_lte(transport->fast_recovery_exit, sack_ctsn))
+		transport->fast_recovery = 0;
+
 	/* The appropriate cwnd increase algorithm is performed if, and only
-	 * if the cumulative TSN has advanced and the congestion window is
+	 * if the cumulative TSN whould advanced and the congestion window is
 	 * being fully utilized.
 	 */
-	if ((transport->asoc->ctsn_ack_point >= sack_ctsn) ||
+	if (TSN_lte(sack_ctsn, transport->asoc->ctsn_ack_point) ||
 	    (flight_size < cwnd))
 		return;
 
@@ -416,17 +422,23 @@
 	pmtu = transport->asoc->pathmtu;
 
 	if (cwnd <= ssthresh) {
-		/* RFC 2960 7.2.1, sctpimpguide-05 2.14.2 When cwnd is less
-		 * than or equal to ssthresh an SCTP endpoint MUST use the
-		 * slow start algorithm to increase cwnd only if the current
-		 * congestion window is being fully utilized and an incoming
-		 * SACK advances the Cumulative TSN Ack Point. Only when these
-		 * two conditions are met can the cwnd be increased otherwise
-		 * the cwnd MUST not be increased. If these conditions are met
-		 * then cwnd MUST be increased by at most the lesser of
-		 * 1) the total size of the previously outstanding DATA
-		 * chunk(s) acknowledged, and 2) the destination's path MTU.
+		/* RFC 4960 7.2.1
+		 * o  When cwnd is less than or equal to ssthresh, an SCTP
+		 *    endpoint MUST use the slow-start algorithm to increase
+		 *    cwnd only if the current congestion window is being fully
+		 *    utilized, an incoming SACK advances the Cumulative TSN
+		 *    Ack Point, and the data sender is not in Fast Recovery.
+		 *    Only when these three conditions are met can the cwnd be
+		 *    increased; otherwise, the cwnd MUST not be increased.
+		 *    If these conditions are met, then cwnd MUST be increased
+		 *    by, at most, the lesser of 1) the total size of the
+		 *    previously outstanding DATA chunk(s) acknowledged, and
+		 *    2) the destination's path MTU.  This upper bound protects
+		 *    against the ACK-Splitting attack outlined in [SAVAGE99].
 		 */
+		if (transport->fast_recovery)
+			return;
+
 		if (bytes_acked > pmtu)
 			cwnd += pmtu;
 		else
@@ -502,6 +514,13 @@
 		 *      cwnd = ssthresh
 		 *      partial_bytes_acked = 0
 		 */
+		if (transport->fast_recovery)
+			return;
+
+		/* Mark Fast recovery */
+		transport->fast_recovery = 1;
+		transport->fast_recovery_exit = transport->asoc->next_tsn - 1;
+
 		transport->ssthresh = max(transport->cwnd/2,
 					  4*transport->asoc->pathmtu);
 		transport->cwnd = transport->ssthresh;
@@ -586,6 +605,7 @@
 	t->flight_size = 0;
 	t->error_count = 0;
 	t->rto_pending = 0;
+	t->fast_recovery = 0;
 
 	/* Initialize the state information for SFR-CACC */
 	t->cacc.changeover_active = 0;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2bdd4dd..fb75f26 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -187,7 +187,8 @@
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
-	return genlmsg_cancel(msg, hdr);
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
 }
 
 static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
@@ -273,7 +274,8 @@
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
-	return genlmsg_cancel(msg, hdr);
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
 }
 
 static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
@@ -928,7 +930,8 @@
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
-	return genlmsg_cancel(msg, hdr);
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
 }
 
 static int nl80211_dump_station(struct sk_buff *skb,
@@ -1267,7 +1270,8 @@
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
-	return genlmsg_cancel(msg, hdr);
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
 }
 
 static int nl80211_dump_mpath(struct sk_buff *skb,
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index ac765dd..23a2cc04 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -200,8 +200,8 @@
 	}
 },
 {
-	.name = "hmac(ripemd160)",
-	.compat = "ripemd160",
+	.name = "hmac(rmd160)",
+	.compat = "rmd160",
 
 	.uinfo = {
 		.auth = {
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index a1b0fbe..b976d9e 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -50,19 +50,8 @@
 
 	switch (type) {
 	case XFRMA_ALG_AUTH:
-		if (!algp->alg_key_len &&
-		    strcmp(algp->alg_name, "digest_null") != 0)
-			return -EINVAL;
-		break;
-
 	case XFRMA_ALG_CRYPT:
-		if (!algp->alg_key_len &&
-		    strcmp(algp->alg_name, "cipher_null") != 0)
-			return -EINVAL;
-		break;
-
 	case XFRMA_ALG_COMP:
-		/* Zero length keys are legal.  */
 		break;
 
 	default:
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index a098a04..17092d6 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -43,7 +43,13 @@
 include include/config/auto.conf
 include scripts/Kbuild.include
 
+# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info
 ifneq ($(KBUILD_EXTMOD),)
+
+# set src + obj - they may be used when building the .mod.c file
+obj := $(KBUILD_EXTMOD)
+src := $(obj)
+
 # Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS
 include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \
              $(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index b6bbbcd..6971bf0 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.18';
+my $V = '0.19';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -115,6 +115,7 @@
 			__kprobes|
 			__(?:mem|cpu|dev|)(?:initdata|init)
 		  }x;
+our $Modifier;
 our $Inline	= qr{inline|__always_inline|noinline};
 our $Member	= qr{->$Ident|\.$Ident|\[[^]]*\]};
 our $Lval	= qr{$Ident(?:$Member)*};
@@ -144,17 +145,17 @@
 
 our @typeList = (
 	qr{void},
-	qr{char},
-	qr{short},
-	qr{int},
-	qr{long},
+	qr{(?:unsigned\s+)?char},
+	qr{(?:unsigned\s+)?short},
+	qr{(?:unsigned\s+)?int},
+	qr{(?:unsigned\s+)?long},
+	qr{(?:unsigned\s+)?long\s+int},
+	qr{(?:unsigned\s+)?long\s+long},
+	qr{(?:unsigned\s+)?long\s+long\s+int},
 	qr{unsigned},
 	qr{float},
 	qr{double},
 	qr{bool},
-	qr{long\s+int},
-	qr{long\s+long},
-	qr{long\s+long\s+int},
 	qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)},
 	qr{struct\s+$Ident},
 	qr{union\s+$Ident},
@@ -163,26 +164,29 @@
 	qr{${Ident}_handler},
 	qr{${Ident}_handler_fn},
 );
+our @modifierList = (
+	qr{fastcall},
+);
 
 sub build_types {
+	my $mods = "(?:  \n" . join("|\n  ", @modifierList) . "\n)";
 	my $all = "(?:  \n" . join("|\n  ", @typeList) . "\n)";
 	$NonptrType	= qr{
-			\b
 			(?:const\s+)?
-			(?:unsigned\s+)?
+			(?:$mods\s+)?
 			(?:
-				$all|
-				(?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)
+				(?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
+				(?:${all}\b)
 			)
 			(?:\s+$Sparse|\s+const)*
-			\b
 		  }x;
 	$Type	= qr{
-			\b$NonptrType\b
+			$NonptrType
 			(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
-			(?:\s+$Inline|\s+$Sparse|\s+$Attribute)*
+			(?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)*
 		  }x;
 	$Declare	= qr{(?:$Storage\s+)?$Type};
+	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 }
 build_types();
 
@@ -329,7 +333,7 @@
 			$off++;
 			next;
 		}
-		if (substr($line, $off, 2) eq $sanitise_quote) {
+		if (substr($line, $off, 2) eq '*/') {
 			$sanitise_quote = '';
 			substr($res, $off, 2, "$;$;");
 			$off++;
@@ -366,14 +370,14 @@
 	}
 
 	# The pathname on a #include may be surrounded by '<' and '>'.
-	if ($res =~ /^.#\s*include\s+\<(.*)\>/) {
+	if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) {
 		my $clean = 'X' x length($1);
 		$res =~ s@\<.*\>@<$clean>@;
 
 	# The whole of a #error is a string.
-	} elsif ($res =~ /^.#\s*(?:error|warning)\s+(.*)\b/) {
+	} elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) {
 		my $clean = 'X' x length($1);
-		$res =~ s@(#\s*(?:error|warning)\s+).*@$1$clean@;
+		$res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@;
 	}
 
 	return $res;
@@ -715,7 +719,7 @@
 			print "DECLARE($1)\n" if ($dbg_values > 1);
 			$type = 'T';
 
-		} elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) {
+		} elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
 			print "DEFINE($1,$2)\n" if ($dbg_values > 1);
 			$av_preprocessor = 1;
 			push(@av_paren_type, $type);
@@ -724,12 +728,12 @@
 			}
 			$type = 'E';
 
-		} elsif ($cur =~ /^(#\s*undef\s*$Ident)/o) {
+		} elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) {
 			print "UNDEF($1)\n" if ($dbg_values > 1);
 			$av_preprocessor = 1;
 			push(@av_paren_type, $type);
 
-		} elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) {
+		} elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) {
 			print "PRE_START($1)\n" if ($dbg_values > 1);
 			$av_preprocessor = 1;
 
@@ -737,7 +741,7 @@
 			push(@av_paren_type, $type);
 			$type = 'E';
 
-		} elsif ($cur =~ /^(#\s*(?:else|elif))/o) {
+		} elsif ($cur =~ /^(\#\s*(?:else|elif))/o) {
 			print "PRE_RESTART($1)\n" if ($dbg_values > 1);
 			$av_preprocessor = 1;
 
@@ -745,7 +749,7 @@
 
 			$type = 'E';
 
-		} elsif ($cur =~ /^(#\s*(?:endif))/o) {
+		} elsif ($cur =~ /^(\#\s*(?:endif))/o) {
 			print "PRE_END($1)\n" if ($dbg_values > 1);
 
 			$av_preprocessor = 1;
@@ -837,14 +841,26 @@
 sub possible {
 	my ($possible, $line) = @_;
 
-	#print "CHECK<$possible>\n";
+	print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1);
 	if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
 	    $possible ne 'goto' && $possible ne 'return' &&
-	    $possible ne 'struct' && $possible ne 'enum' &&
 	    $possible ne 'case' && $possible ne 'else' &&
-	    $possible ne 'typedef') {
-		warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
-		push(@typeList, $possible);
+	    $possible ne 'asm' &&
+	    $possible !~ /^(typedef|struct|enum)\b/) {
+		# Check for modifiers.
+		$possible =~ s/\s*$Storage\s*//g;
+		$possible =~ s/\s*$Sparse\s*//g;
+		if ($possible =~ /^\s*$/) {
+
+		} elsif ($possible =~ /\s/) {
+			$possible =~ s/\s*$Type\s*//g;
+			warn "MODIFIER: $possible ($line)\n" if ($dbg_possible);
+			push(@modifierList, $possible);
+
+		} else {
+			warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
+			push(@typeList, $possible);
+		}
 		build_types();
 	}
 }
@@ -949,6 +965,7 @@
 			} else {
 				$realcnt=1+1;
 			}
+			$in_comment = 0;
 
 			# Guestimate if this is a continuing comment.  Run
 			# the context looking for a comment "edge".  If this
@@ -1117,7 +1134,9 @@
 			ERROR("trailing whitespace\n" . $herevet);
 		}
 #80 column limit
-		if ($line =~ /^\+/ && !($prevrawline=~/\/\*\*/) && $length > 80) {
+		if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
+		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80)
+		{
 			WARN("line over 80 characters\n" . $herecurr);
 		}
 
@@ -1159,18 +1178,20 @@
 			# Ignore functions being called
 			} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
 
+			# declarations always start with types
+			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) {
+				my $type = $1;
+				$type =~ s/\s+/ /g;
+				possible($type, "A:" . $s);
+
 			# definitions in global scope can only start with types
 			} elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/s) {
-				possible($1, $s);
-
-			# declarations always start with types
-			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/s) {
-				possible($1, $s);
+				possible($1, "B:" . $s);
 			}
 
 			# any (foo ... *) is a pointer cast, and foo is a type
 			while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/sg) {
-				possible($1, $s);
+				possible($1, "C:" . $s);
 			}
 
 			# Check for any sort of function declaration.
@@ -1184,9 +1205,9 @@
 				$ctx =~ s/\)[^\)]*$//;
 
 				for my $arg (split(/\s*,\s*/, $ctx)) {
-					if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
+					if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) {
 
-						possible($1, $s);
+						possible($1, "D:" . $s);
 					}
 				}
 			}
@@ -1221,7 +1242,7 @@
 
 # if/while/etc brace do not go on next line, unless defining a do while loop,
 # or if that brace on the next line is for something else
-		if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+		if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) {
 			my $pre_ctx = "$1$2";
 
 			my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
@@ -1239,7 +1260,7 @@
 
 			if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
 				ERROR("that open brace { should be on the previous line\n" .
-					"$here\n$ctx\n$lines[$ctx_ln - 1]");
+					"$here\n$ctx\n$lines[$ctx_ln - 1]\n");
 			}
 			if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
 			    $ctx =~ /\)\s*\;\s*$/ &&
@@ -1248,7 +1269,7 @@
 				my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
 				if ($nindent > $indent) {
 					WARN("trailing semicolon indicates no statements, indent implies otherwise\n" .
-						"$here\n$ctx\n$lines[$ctx_ln - 1]");
+						"$here\n$ctx\n$lines[$ctx_ln - 1]\n");
 				}
 			}
 		}
@@ -1284,7 +1305,7 @@
 #
 
 # check for malformed paths in #include statements (uses RAW line)
-		if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) {
+		if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) {
 			my $path = $1;
 			if ($path =~ m{//}) {
 				ERROR("malformed #include filename\n" .
@@ -1316,7 +1337,7 @@
 		}
 
 # check for external initialisers.
-		if ($line =~ /^.$Type\s*$Ident\s*=\s*(0|NULL|false)\s*;/) {
+		if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
 			ERROR("do not initialise externals to 0 or NULL\n" .
 				$herecurr);
 		}
@@ -1330,6 +1351,7 @@
 # make sense.
 		if ($line =~ /\btypedef\s/ &&
 		    $line !~ /\btypedef\s+$Type\s+\(\s*\*?$Ident\s*\)\s*\(/ &&
+		    $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ &&
 		    $line !~ /\b__bitwise(?:__|)\b/) {
 			WARN("do not add new typedefs\n" . $herecurr);
 		}
@@ -1388,8 +1410,8 @@
 
 # function brace can't be on same line, except for #defines of do while,
 # or if closed on same line
-		if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).*\s{/) and
-		    !($line=~/\#define.*do\s{/) and !($line=~/}/)) {
+		if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and
+		    !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) {
 			ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
 		}
 
@@ -1416,10 +1438,10 @@
 			# cpp #define statements have non-optional spaces, ie
 			# if there is a space between the name and the open
 			# parenthesis it is simply not a parameter group.
-			} elsif ($ctx_before =~ /^.\#\s*define\s*$/) {
+			} elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) {
 
 			# cpp #elif statement condition may start with a (
-			} elsif ($ctx =~ /^.\#\s*elif\s*$/) {
+			} elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) {
 
 			# If this whole things ends with a type its most
 			# likely a typedef for a function.
@@ -1625,13 +1647,14 @@
 			ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
 		}
 
-# check spacing on paretheses
+# check spacing on parentheses
 		if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
 		    $line !~ /for\s*\(\s+;/) {
 			ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
 		}
 		if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
-		    $line !~ /for\s*\(.*;\s+\)/) {
+		    $line !~ /for\s*\(.*;\s+\)/ &&
+		    $line !~ /:\s+\)/) {
 			ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
 		}
 
@@ -1641,6 +1664,23 @@
 			WARN("labels should not be indented\n" . $herecurr);
 		}
 
+# Return is not a function.
+		if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) {
+			my $spacing = $1;
+			my $value = $2;
+
+			# Flatten any parentheses and braces
+			while ($value =~ s/\([^\(\)]*\)/1/) {
+			}
+
+			if ($value =~ /^(?:$Ident|-?$Constant)$/) {
+				ERROR("return is not a function, parentheses are not required\n" . $herecurr);
+
+			} elsif ($spacing !~ /\s+/) {
+				ERROR("space required before the open parenthesis '('\n" . $herecurr);
+			}
+		}
+
 # Need a space before open parenthesis after if, while etc
 		if ($line=~/\b(if|while|for|switch)\(/) {
 			ERROR("space required before the open parenthesis '('\n" . $herecurr);
@@ -1660,7 +1700,7 @@
 			$s =~ s/\n.*//g;
 			$s =~ s/$;//g; 	# Remove any comments
 			if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
-			    $c !~ /^.\#\s*if/)
+			    $c !~ /^.\s*\#\s*if/)
 			{
 				ERROR("trailing statements should be on next line\n" . $herecurr);
 			}
@@ -1719,14 +1759,16 @@
 #		}
 
 #no spaces allowed after \ in define
-		if ($line=~/\#define.*\\\s$/) {
+		if ($line=~/\#\s*define.*\\\s$/) {
 			WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr);
 		}
 
 #warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
-		if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
-			my $checkfile = "$root/include/linux/$1.h";
-			if (-f $checkfile && $1 ne 'irq') {
+		if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\<asm\/(.*)\.h\>}) {
+			my $checkfile = "include/linux/$1.h";
+			if (-f "$root/$checkfile" && $realfile ne $checkfile &&
+			    $1 ne 'irq')
+			{
 				WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
 					$herecurr);
 			}
@@ -1735,45 +1777,87 @@
 # multi-statement macros should be enclosed in a do while loop, grab the
 # first statement and ensure its the whole macro if its not enclosed
 # in a known good container
-		if ($prevline =~ /\#define.*\\/ &&
-		   $prevline !~/(?:do\s+{|\(\{|\{)/ &&
-		   $line !~ /(?:do\s+{|\(\{|\{)/ &&
-		   $line !~ /^.\s*$Declare\s/) {
-			# Grab the first statement, if that is the entire macro
-			# its ok.  This may start either on the #define line
-			# or the one below.
+		if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
 			my $ln = $linenr;
 			my $cnt = $realcnt;
-			my $off = 0;
+			my ($off, $dstat, $dcond, $rest);
+			my $ctx = '';
 
-			# If the macro starts on the define line start
-			# grabbing the statement after the identifier
-			$prevline =~ m{^(.#\s*define\s*$Ident(?:\([^\)]*\))?\s*)(.*)\\\s*$};
-			##print "1<$1> 2<$2>\n";
-			if (defined $2 && $2 ne '') {
-				$off = length($1);
-				$ln--;
-				$cnt++;
-				while ($lines[$ln - 1] =~ /^-/) {
-					$ln--;
-					$cnt++;
-				}
+			my $args = defined($1);
+
+			# Find the end of the macro and limit our statement
+			# search to that.
+			while ($cnt > 0 && defined $lines[$ln - 1] &&
+				$lines[$ln - 1] =~ /^(?:-|..*\\$)/)
+			{
+				$ctx .= $rawlines[$ln - 1] . "\n";
+				$ln++;
+				$cnt--;
 			}
-			my @ctx = ctx_statement($ln, $cnt, $off);
-			my $ctx_ln = $ln + $#ctx + 1;
-			my $ctx = join("\n", @ctx);
+			$ctx .= $rawlines[$ln - 1];
 
-			# Pull in any empty extension lines.
-			while ($ctx =~ /\\$/ &&
-			       $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) {
-				$ctx .= $lines[$ctx_ln - 1];
-				$ctx_ln++;
+			($dstat, $dcond, $ln, $cnt, $off) =
+				ctx_statement_block($linenr, $ln - $linenr + 1, 0);
+			#print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
+			#print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n";
+
+			# Extract the remainder of the define (if any) and
+			# rip off surrounding spaces, and trailing \'s.
+			$rest = '';
+			if (defined $lines[$ln - 1] &&
+			    $off > length($lines[$ln - 1]))
+			{
+				$ln++;
+				$cnt--;
+				$off = 0;
+			}
+			while ($cnt > 0) {
+				$rest .= substr($lines[$ln - 1], $off) . "\n";
+				$ln++;
+				$cnt--;
+				$off = 0;
+			}
+			$rest =~ s/\\\n.//g;
+			$rest =~ s/^\s*//s;
+			$rest =~ s/\s*$//s;
+
+			# Clean up the original statement.
+			if ($args) {
+				substr($dstat, 0, length($dcond), '');
+			} else {
+				$dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
+			}
+			$dstat =~ s/\\\n.//g;
+			$dstat =~ s/^\s*//s;
+			$dstat =~ s/\s*$//s;
+
+			# Flatten any parentheses and braces
+			while ($dstat =~ s/\([^\(\)]*\)/1/) {
+			}
+			while ($dstat =~ s/\{[^\{\}]*\}/1/) {
 			}
 
-			if ($ctx =~ /\\$/) {
-				if ($ctx =~ /;/) {
+			my $exceptions = qr{
+				$Declare|
+				module_param_named|
+				MODULE_PARAM_DESC|
+				DECLARE_PER_CPU|
+				DEFINE_PER_CPU|
+				__typeof__\(
+			}x;
+			if ($rest ne '') {
+				if ($rest !~ /while\s*\(/ &&
+				    $dstat !~ /$exceptions/)
+				{
 					ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
-				} else {
+				}
+
+			} elsif ($ctx !~ /;/) {
+				if ($dstat ne '' &&
+				    $dstat !~ /^(?:$Ident|-?$Constant)$/ &&
+				    $dstat !~ /$exceptions/ &&
+				    $dstat =~ /$Operators/)
+				{
 					ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
 				}
 			}
@@ -1884,7 +1968,7 @@
 
 # don't include deprecated include files (uses RAW line)
 		for my $inc (@dep_includes) {
-			if ($rawline =~ m@\#\s*include\s*\<$inc>@) {
+			if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) {
 				ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr);
 			}
 		}
@@ -1908,7 +1992,7 @@
 		}
 
 # warn about #if 0
-		if ($line =~ /^.#\s*if\s+0\b/) {
+		if ($line =~ /^.\s*\#\s*if\s+0\b/) {
 			CHK("if this code is redundant consider removing it\n" .
 				$herecurr);
 		}
@@ -1920,23 +2004,16 @@
 				WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
 			}
 		}
-# check for needless usb_free_urb() checks
-		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
-			my $expr = $1;
-			if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
-				WARN("usb_free_urb(NULL) is safe this check is probabally not required\n" . $hereprev);
-			}
-		}
 
 # warn about #ifdefs in C files
-#		if ($line =~ /^.#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
+#		if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
 #			print "#ifdef in C files should be avoided\n";
 #			print "$herecurr";
 #			$clean = 0;
 #		}
 
 # warn about spacing in #ifdefs
-		if ($line =~ /^.#\s*(ifdef|ifndef|elif)\s\s+/) {
+		if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) {
 			ERROR("exactly one space required after that #$1\n" . $herecurr);
 		}
 
@@ -1955,7 +2032,7 @@
 			}
 		}
 # check of hardware specific defines
-		if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
+		if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
 			CHK("architecture specific defines should be avoided\n" .  $herecurr);
 		}
 
@@ -1973,15 +2050,18 @@
 
 # check for new externs in .c files.
 		if ($realfile =~ /\.c$/ && defined $stat &&
-		    $stat =~ /^.\s*(?:extern\s+)?$Type\s+$Ident(\s*)\(/s)
+		    $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s)
 		{
-			my $paren_space = $1;
+			my $function_name = $1;
+			my $paren_space = $2;
 
 			my $s = $stat;
 			if (defined $cond) {
 				substr($s, 0, length($cond), '');
 			}
-			if ($s =~ /^\s*;/) {
+			if ($s =~ /^\s*;/ &&
+			    $function_name ne 'uninitialized_var')
+			{
 				WARN("externs should be avoided in .c files\n" .  $herecurr);
 			}
 
@@ -2030,8 +2110,8 @@
 # use of NR_CPUS is usually wrong
 # ignore definitions of NR_CPUS and usage to define arrays as likely right
 		if ($line =~ /\bNR_CPUS\b/ &&
-		    $line !~ /^.#\s*if\b.*\bNR_CPUS\b/ &&
-		    $line !~ /^.#\s*define\b.*\bNR_CPUS\b/ &&
+		    $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ &&
+		    $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ &&
 		    $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ &&
 		    $line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ &&
 		    $line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/)
diff --git a/scripts/decodecode b/scripts/decodecode
old mode 100644
new mode 100755
diff --git a/scripts/ver_linux b/scripts/ver_linux
index ab69ece..7ac0e30 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -12,12 +12,9 @@
 uname -a
 echo ' '
 
-gcc --version 2>&1| head -n 1 | grep -v gcc | awk \
+gcc -dumpversion 2>&1| awk \
 'NR==1{print "Gnu C                 ", $1}'
 
-gcc --version 2>&1| grep gcc | awk \
-'NR==1{print "Gnu C                 ", $3}'
-
 make --version 2>&1 | awk -F, '{print $1}' | awk \
       '/GNU Make/{print "Gnu make              ",$NF}'
 
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 4ea5836..baf3488 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -49,10 +49,14 @@
 	spinlock_t lock;
 };
 
+static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s)
+{
+	return container_of(s, struct dev_cgroup, css);
+}
+
 static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup)
 {
-	return container_of(cgroup_subsys_state(cgroup, devices_subsys_id),
-			    struct dev_cgroup, css);
+	return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id));
 }
 
 struct cgroup_subsys devices_subsys;
@@ -102,7 +106,7 @@
 static int dev_whitelist_add(struct dev_cgroup *dev_cgroup,
 			struct dev_whitelist_item *wh)
 {
-	struct dev_whitelist_item *whcopy;
+	struct dev_whitelist_item *whcopy, *walk;
 
 	whcopy = kmalloc(sizeof(*whcopy), GFP_KERNEL);
 	if (!whcopy)
@@ -110,7 +114,21 @@
 
 	memcpy(whcopy, wh, sizeof(*whcopy));
 	spin_lock(&dev_cgroup->lock);
-	list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
+	list_for_each_entry(walk, &dev_cgroup->whitelist, list) {
+		if (walk->type != wh->type)
+			continue;
+		if (walk->major != wh->major)
+			continue;
+		if (walk->minor != wh->minor)
+			continue;
+
+		walk->access |= wh->access;
+		kfree(whcopy);
+		whcopy = NULL;
+	}
+
+	if (whcopy != NULL)
+		list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
 	spin_unlock(&dev_cgroup->lock);
 	return 0;
 }
@@ -502,7 +520,6 @@
 
 int devcgroup_inode_permission(struct inode *inode, int mask)
 {
-	struct cgroup *cgroup;
 	struct dev_cgroup *dev_cgroup;
 	struct dev_whitelist_item *wh;
 
@@ -511,8 +528,8 @@
 		return 0;
 	if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
 		return 0;
-	cgroup = task_cgroup(current, devices_subsys.subsys_id);
-	dev_cgroup = cgroup_to_devcgroup(cgroup);
+	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+				devices_subsys_id));
 	if (!dev_cgroup)
 		return 0;
 
@@ -543,12 +560,11 @@
 
 int devcgroup_inode_mknod(int mode, dev_t dev)
 {
-	struct cgroup *cgroup;
 	struct dev_cgroup *dev_cgroup;
 	struct dev_whitelist_item *wh;
 
-	cgroup = task_cgroup(current, devices_subsys.subsys_id);
-	dev_cgroup = cgroup_to_devcgroup(cgroup);
+	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+				devices_subsys_id));
 	if (!dev_cgroup)
 		return 0;
 
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 8c05587..b39f5c2 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -78,7 +78,6 @@
 
 extern struct rb_root key_serial_tree;
 extern spinlock_t key_serial_lock;
-extern struct semaphore key_alloc_sem;
 extern struct mutex key_construction_mutex;
 extern wait_queue_head_t request_key_conswq;
 
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index b5c8f92..4a09293 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1881,6 +1881,18 @@
 	final = sbsp->smk_default;
 
 	/*
+	 * If this is the root inode the superblock
+	 * may be in the process of initialization.
+	 * If that is the case use the root value out
+	 * of the superblock.
+	 */
+	if (opt_dentry->d_parent == opt_dentry) {
+		isp->smk_inode = sbsp->smk_root;
+		isp->smk_flags |= SMK_INODE_INSTANT;
+		goto unlockandout;
+	}
+
+	/*
 	 * This is pretty hackish.
 	 * Casey says that we shouldn't have to do
 	 * file system specific code, but it does help
diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h
index f07cc1e..1d661f7 100644
--- a/sound/drivers/pcsp/pcsp.h
+++ b/sound/drivers/pcsp/pcsp.h
@@ -24,7 +24,8 @@
 /* default timer freq for PC-Speaker: 18643 Hz */
 #define DIV_18KHZ 64
 #define MAX_DIV DIV_18KHZ
-#define CUR_DIV() (MAX_DIV >> chip->treble)
+#define CALC_DIV(d) (MAX_DIV >> (d))
+#define CUR_DIV() CALC_DIV(chip->treble)
 #define PCSP_MAX_TREBLE 1
 
 /* unfortunately, with hrtimers 37KHz does not work very well :( */
@@ -36,7 +37,8 @@
 #define PCSP_DEFAULT_SDIV (DIV_18KHZ >> 1)
 #define PCSP_DEFAULT_SRATE (PIT_TICK_RATE / PCSP_DEFAULT_SDIV)
 #define PCSP_INDEX_INC() (1 << (PCSP_MAX_TREBLE - chip->treble))
-#define PCSP_RATE() (PIT_TICK_RATE / CUR_DIV())
+#define PCSP_CALC_RATE(i) (PIT_TICK_RATE / CALC_DIV(i))
+#define PCSP_RATE() PCSP_CALC_RATE(chip->treble)
 #define PCSP_MIN_RATE__1 MAX_DIV/PIT_TICK_RATE
 #define PCSP_MAX_RATE__1 MIN_DIV/PIT_TICK_RATE
 #define PCSP_MAX_PERIOD_NS (1000000000ULL * PCSP_MIN_RATE__1)
diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index 64a695f..caeb0f5 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -50,7 +50,8 @@
 	uinfo->value.enumerated.items = chip->max_treble + 1;
 	if (uinfo->value.enumerated.item > chip->max_treble)
 		uinfo->value.enumerated.item = chip->max_treble;
-	sprintf(uinfo->value.enumerated.name, "%d", PCSP_RATE());
+	sprintf(uinfo->value.enumerated.name, "%d",
+			PCSP_CALC_RATE(uinfo->value.enumerated.item));
 	return 0;
 }
 
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 2da8981..1292dce 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1971,6 +1971,9 @@
 
 	val = ac97->regs[AC97_AD_MISC];
 	ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL);
+	if (ac97->spec.ad18xx.lo_as_master)
+		ucontrol->value.integer.value[0] =
+			!ucontrol->value.integer.value[0];
 	return 0;
 }
 
@@ -1979,8 +1982,10 @@
 	struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
 	unsigned short val;
 
-	val = !ucontrol->value.integer.value[0]
-		? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
+	val = !ucontrol->value.integer.value[0];
+	if (ac97->spec.ad18xx.lo_as_master)
+		val = !val;
+	val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
 	return snd_ac97_update_bits(ac97, AC97_AD_MISC,
 				    AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val);
 }
@@ -2031,7 +2036,7 @@
 {
 	unsigned short val = 0;
 	/* clear LODIS if shared jack is to be used for Surround out */
-	if (is_shared_linein(ac97))
+	if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97))
 		val |= (1 << 12);
 	/* clear CLDIS if shared jack is to be used for C/LFE out */
 	if (is_shared_micin(ac97))
@@ -2067,9 +2072,13 @@
 
 static int patch_ad1888_specific(struct snd_ac97 *ac97)
 {
-	/* rename 0x04 as "Master" and 0x02 as "Master Surround" */
-	snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback");
-	snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback");
+	if (!ac97->spec.ad18xx.lo_as_master) {
+		/* rename 0x04 as "Master" and 0x02 as "Master Surround" */
+		snd_ac97_rename_vol_ctl(ac97, "Master Playback",
+					"Master Surround Playback");
+		snd_ac97_rename_vol_ctl(ac97, "Headphone Playback",
+					"Master Playback");
+	}
 	return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls));
 }
 
@@ -2088,16 +2097,27 @@
 	
 	patch_ad1881(ac97);
 	ac97->build_ops = &patch_ad1888_build_ops;
-	/* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
-	/* it seems that most vendors connect line-out connector to headphone out of AC'97 */
+
+	/*
+	 * LO can be used as a real line-out on some devices,
+	 * and we need to revert the front/surround mixer switches
+	 */
+	if (ac97->subsystem_vendor == 0x1043 &&
+	    ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */
+		ac97->spec.ad18xx.lo_as_master = 1;
+
+	misc = snd_ac97_read(ac97, AC97_AD_MISC);
 	/* AD-compatible mode */
 	/* Stereo mutes enabled */
-	misc = snd_ac97_read(ac97, AC97_AD_MISC);
-	snd_ac97_write_cache(ac97, AC97_AD_MISC, misc |
-			     AC97_AD198X_LOSEL |
-			     AC97_AD198X_HPSEL |
-			     AC97_AD198X_MSPLT |
-			     AC97_AD198X_AC97NC);
+	misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC;
+	if (!ac97->spec.ad18xx.lo_as_master)
+		/* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
+		/* it seems that most vendors connect line-out connector to
+		 * headphone out of AC'97
+		 */
+		misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL;
+
+	snd_ac97_write_cache(ac97, AC97_AD_MISC, misc);
 	ac97->flags |= AC97_STEREO_MUTES;
 	return 0;
 }
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index abde5b9..548c9cc 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1818,13 +1818,6 @@
 	}
 	emu->port = pci_resource_start(pci, 0);
 
-	if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
-			"EMU10K1", emu)) {
-		err = -EBUSY;
-		goto error;
-	}
-	emu->irq = pci->irq;
-
 	emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
 	if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
 				32 * 1024, &emu->ptb_pages) < 0) {
@@ -1887,6 +1880,14 @@
 	emu->fx8010.etram_pages.area = NULL;
 	emu->fx8010.etram_pages.bytes = 0;
 
+	/* irq handler must be registered after I/O ports are activated */
+	if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
+			"EMU10K1", emu)) {
+		err = -EBUSY;
+		goto error;
+	}
+	emu->irq = pci->irq;
+
 	/*
 	 *  Init to 0x02109204 :
 	 *  Clock accuracy    = 0     (1000ppm)
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index e0a605a..a99e86d 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -2858,6 +2858,7 @@
 static struct snd_pci_quirk ad1988_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x81ec, "Asus P5B-DLX", AD1988_6STACK_DIG),
 	SND_PCI_QUIRK(0x1043, 0x81f6, "Asus M2N-SLI", AD1988_6STACK_DIG),
+	SND_PCI_QUIRK(0x1043, 0x8277, "Asus P5K-E/WIFI-AP", AD1988_6STACK_DIG),
 	{}
 };
 
@@ -3643,33 +3644,17 @@
 	{ } /* end */
 };
 
-static struct hda_input_mux ad1884a_mobile_capture_source = {
-	.num_items = 2,
-	.items = {
-		{ "Mic", 0x1 }, /* port-C */
-		{ "Mix", 0x3 },
-	},
-};
-
 static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
 	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Capture Source",
-		.info = ad198x_mux_enum_info,
-		.get = ad198x_mux_enum_get,
-		.put = ad198x_mux_enum_put,
-	},
 	{ } /* end */
 };
 
@@ -3686,14 +3671,31 @@
 			    present ? 0x00 : 0x02);
 }
 
+/* switch to external mic if plugged */
+static void ad1884a_hp_automic(struct hda_codec *codec)
+{
+	unsigned int present;
+
+	present = snd_hda_codec_read(codec, 0x14, 0,
+				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL,
+			    present ? 0 : 1);
+}
+
 #define AD1884A_HP_EVENT		0x37
+#define AD1884A_MIC_EVENT		0x36
 
 /* unsolicited event for HP jack sensing */
 static void ad1884a_hp_unsol_event(struct hda_codec *codec, unsigned int res)
 {
-	if ((res >> 26) != AD1884A_HP_EVENT)
-		return;
-	ad1884a_hp_automute(codec);
+	switch (res >> 26) {
+	case AD1884A_HP_EVENT:
+		ad1884a_hp_automute(codec);
+		break;
+	case AD1884A_MIC_EVENT:
+		ad1884a_hp_automic(codec);
+		break;
+	}
 }
 
 /* initialize jack-sensing, too */
@@ -3701,6 +3703,7 @@
 {
 	ad198x_init(codec);
 	ad1884a_hp_automute(codec);
+	ad1884a_hp_automic(codec);
 	return 0;
 }
 
@@ -3714,10 +3717,15 @@
 	/* Port-F pin */
 	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Port-C pin - internal mic-in */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
 	/* analog mix */
 	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
 	/* unsolicited event for pin-sense */
 	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
 	{ } /* end */
 };
 
@@ -3877,7 +3885,6 @@
 		spec->mixers[0] = ad1884a_mobile_mixers;
 		spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
 		spec->multiout.dig_out_nid = 0;
-		spec->input_mux = &ad1884a_mobile_capture_source;
 		codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
 		codec->patch_ops.init = ad1884a_hp_init;
 		break;
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index c73ce07..6ef57fb 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -611,6 +611,7 @@
 
 static struct snd_pci_quirk cmi9880_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", CMI_FULL_DIG),
+	SND_PCI_QUIRK(0x1854, 0x002b, "LG LS75", CMI_MINIMAL),
 	SND_PCI_QUIRK(0x1854, 0x0032, "LG", CMI_FULL_DIG),
 	{} /* terminator */
 };
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 864b2f5..b0a2a26 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -853,6 +853,7 @@
 		case 0x10ec0269:
 		case 0x10ec0862:
 		case 0x10ec0662:	
+		case 0x10ec0889:
 			snd_hda_codec_write(codec, 0x14, 0,
 					    AC_VERB_SET_EAPD_BTLENABLE, 2);
 			snd_hda_codec_write(codec, 0x15, 0,
@@ -877,6 +878,7 @@
 		case 0x10ec0883:
 		case 0x10ec0885:
 		case 0x10ec0888:
+		case 0x10ec0889:
 			snd_hda_codec_write(codec, 0x20, 0,
 					    AC_VERB_SET_COEF_INDEX, 7);
 			tmp = snd_hda_codec_read(codec, 0x20, 0,
@@ -940,7 +942,6 @@
 			    AC_VERB_SET_UNSOLICITED_ENABLE,
 			    AC_USRSP_EN | ALC880_HP_EVENT);
 	spec->unsol_event = alc_sku_unsol_event;
-	spec->init_hook = alc_sku_automute;	
 }
 
 /*
@@ -7743,6 +7744,7 @@
 	SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
 	SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
 	SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
@@ -8640,6 +8642,7 @@
 
 	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{}
 };
 
 /* mute/unmute internal speaker according to the hp jack and mute state */
@@ -10510,6 +10513,7 @@
 	SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
 	SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
+	SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
 	SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
 	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 393f7fd..a4f44a0 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -840,7 +840,7 @@
 static struct snd_kcontrol_new stac925x_mixer[] = {
 	STAC_INPUT_SOURCE(1),
 	HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Capture Mux Volume", 0x0f, 0, HDA_OUTPUT),
 	{ } /* end */
 };
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 52b1d81..e7e4352 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -447,6 +447,23 @@
 	},
 };
 
+static struct hda_pcm_stream vt1708_pcm_analog_s16_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 8,
+	.nid = 0x10, /* NID to query formats and rates */
+	/* We got noisy outputs on the right channel on VT1708 when
+	 * 24bit samples are used.  Until any workaround is found,
+	 * disable the 24bit format, so far.
+	 */
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	.ops = {
+		.open = via_playback_pcm_open,
+		.prepare = via_playback_pcm_prepare,
+		.cleanup = via_playback_pcm_cleanup
+	},
+};
+
 static struct hda_pcm_stream vt1708_pcm_analog_capture = {
 	.substreams = 2,
 	.channels_min = 2,
@@ -899,6 +916,9 @@
 	
 	spec->stream_name_analog = "VT1708 Analog";
 	spec->stream_analog_playback = &vt1708_pcm_analog_playback;
+	/* disable 32bit format on VT1708 */
+	if (codec->vendor_id == 0x11061708)
+		spec->stream_analog_playback = &vt1708_pcm_analog_s16_playback;
 	spec->stream_analog_capture = &vt1708_pcm_analog_capture;
 
 	spec->stream_name_digital = "VT1708 Digital";