| /* arch/arm/plat-s3c64xx/irq-pm.c | |
| * | |
| * Copyright 2008 Openmoko, Inc. | |
| * Copyright 2008 Simtec Electronics | |
| * Ben Dooks <ben@simtec.co.uk> | |
| * http://armlinux.simtec.co.uk/ | |
| * | |
| * S3C64XX - Interrupt handling Power Management | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| /* | |
| * NOTE: Code in this file is not used when booting with Device Tree support. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/serial_s3c.h> | |
| #include <linux/irq.h> | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #include <mach/map.h> | |
| #include <mach/regs-gpio.h> | |
| #include <plat/cpu.h> | |
| #include <plat/pm.h> | |
| /* We handled all the IRQ types in this code, to save having to make several | |
| * small files to handle each different type separately. Having the EINT_GRP | |
| * code here shouldn't be as much bloat as the IRQ table space needed when | |
| * they are enabled. The added benefit is we ensure that these registers are | |
| * in the same state as we suspended. | |
| */ | |
| static struct sleep_save irq_save[] = { | |
| SAVE_ITEM(S3C64XX_PRIORITY), | |
| SAVE_ITEM(S3C64XX_EINT0CON0), | |
| SAVE_ITEM(S3C64XX_EINT0CON1), | |
| SAVE_ITEM(S3C64XX_EINT0FLTCON0), | |
| SAVE_ITEM(S3C64XX_EINT0FLTCON1), | |
| SAVE_ITEM(S3C64XX_EINT0FLTCON2), | |
| SAVE_ITEM(S3C64XX_EINT0FLTCON3), | |
| SAVE_ITEM(S3C64XX_EINT0MASK), | |
| }; | |
| static struct irq_grp_save { | |
| u32 fltcon; | |
| u32 con; | |
| u32 mask; | |
| } eint_grp_save[5]; | |
| #ifndef CONFIG_SERIAL_SAMSUNG_UARTS | |
| #define SERIAL_SAMSUNG_UARTS 0 | |
| #else | |
| #define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS | |
| #endif | |
| static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS]; | |
| static int s3c64xx_irq_pm_suspend(void) | |
| { | |
| struct irq_grp_save *grp = eint_grp_save; | |
| int i; | |
| S3C_PMDBG("%s: suspending IRQs\n", __func__); | |
| s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); | |
| for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++) | |
| irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); | |
| for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { | |
| grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4)); | |
| grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4)); | |
| grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4)); | |
| } | |
| return 0; | |
| } | |
| static void s3c64xx_irq_pm_resume(void) | |
| { | |
| struct irq_grp_save *grp = eint_grp_save; | |
| int i; | |
| S3C_PMDBG("%s: resuming IRQs\n", __func__); | |
| s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); | |
| for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++) | |
| __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); | |
| for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { | |
| __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4)); | |
| __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4)); | |
| __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4)); | |
| } | |
| S3C_PMDBG("%s: IRQ configuration restored\n", __func__); | |
| } | |
| static struct syscore_ops s3c64xx_irq_syscore_ops = { | |
| .suspend = s3c64xx_irq_pm_suspend, | |
| .resume = s3c64xx_irq_pm_resume, | |
| }; | |
| static __init int s3c64xx_syscore_init(void) | |
| { | |
| /* Appropriate drivers (pinctrl, uart) handle this when using DT. */ | |
| if (of_have_populated_dt() || !soc_is_s3c64xx()) | |
| return 0; | |
| register_syscore_ops(&s3c64xx_irq_syscore_ops); | |
| return 0; | |
| } | |
| core_initcall(s3c64xx_syscore_init); |