| /* | |
| * linux/arch/arm/mach-s3c64xx/mach-smartq.c | |
| * | |
| * Copyright (C) 2010 Maurus Cuelenaere | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/fb.h> | |
| #include <linux/gpio.h> | |
| #include <linux/gpio/machine.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pwm.h> | |
| #include <linux/pwm_backlight.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/serial_s3c.h> | |
| #include <linux/spi/spi_gpio.h> | |
| #include <linux/usb/gpio_vbus.h> | |
| #include <linux/platform_data/s3c-hsotg.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/map.h> | |
| #include <mach/map.h> | |
| #include <mach/regs-gpio.h> | |
| #include <mach/gpio-samsung.h> | |
| #include <plat/cpu.h> | |
| #include <plat/devs.h> | |
| #include <linux/platform_data/i2c-s3c2410.h> | |
| #include <plat/gpio-cfg.h> | |
| #include <linux/platform_data/hwmon-s3c.h> | |
| #include <linux/platform_data/usb-ohci-s3c2410.h> | |
| #include <plat/sdhci.h> | |
| #include <linux/platform_data/touchscreen-s3c2410.h> | |
| #include <video/platform_lcd.h> | |
| #include <plat/samsung-time.h> | |
| #include "common.h" | |
| #include "mach-smartq.h" | |
| #include "regs-modem.h" | |
| #define UCON S3C2410_UCON_DEFAULT | |
| #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) | |
| #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) | |
| static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = { | |
| [0] = { | |
| .hwport = 0, | |
| .flags = 0, | |
| .ucon = UCON, | |
| .ulcon = ULCON, | |
| .ufcon = UFCON, | |
| }, | |
| [1] = { | |
| .hwport = 1, | |
| .flags = 0, | |
| .ucon = UCON, | |
| .ulcon = ULCON, | |
| .ufcon = UFCON, | |
| }, | |
| [2] = { | |
| .hwport = 2, | |
| .flags = 0, | |
| .ucon = UCON, | |
| .ulcon = ULCON, | |
| .ufcon = UFCON, | |
| }, | |
| }; | |
| static void smartq_usb_host_powercontrol(int port, int to) | |
| { | |
| pr_debug("%s(%d, %d)\n", __func__, port, to); | |
| if (port == 0) { | |
| gpio_set_value(S3C64XX_GPL(0), to); | |
| gpio_set_value(S3C64XX_GPL(1), to); | |
| } | |
| } | |
| static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw) | |
| { | |
| struct s3c2410_hcd_info *info = pw; | |
| if (gpio_get_value(S3C64XX_GPL(10)) == 0) { | |
| pr_debug("%s: over-current irq (oc detected)\n", __func__); | |
| s3c2410_usb_report_oc(info, 3); | |
| } else { | |
| pr_debug("%s: over-current irq (oc cleared)\n", __func__); | |
| s3c2410_usb_report_oc(info, 0); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on) | |
| { | |
| int ret; | |
| /* This isn't present on a SmartQ 5 board */ | |
| if (machine_is_smartq5()) | |
| return; | |
| if (on) { | |
| ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)), | |
| smartq_usb_host_ocirq, | |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | |
| "USB host overcurrent", info); | |
| if (ret != 0) | |
| pr_err("failed to request usb oc irq: %d\n", ret); | |
| } else { | |
| free_irq(gpio_to_irq(S3C64XX_GPL(10)), info); | |
| } | |
| } | |
| static struct s3c2410_hcd_info smartq_usb_host_info = { | |
| .port[0] = { | |
| .flags = S3C_HCDFLG_USED | |
| }, | |
| .port[1] = { | |
| .flags = 0 | |
| }, | |
| .power_control = smartq_usb_host_powercontrol, | |
| .enable_oc = smartq_usb_host_enableoc, | |
| }; | |
| static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = { | |
| .gpio_vbus = S3C64XX_GPL(9), | |
| .gpio_pullup = -1, | |
| .gpio_vbus_inverted = true, | |
| }; | |
| static struct platform_device smartq_usb_otg_vbus_dev = { | |
| .name = "gpio-vbus", | |
| .dev.platform_data = &smartq_usb_otg_vbus_pdata, | |
| }; | |
| static struct pwm_lookup smartq_pwm_lookup[] = { | |
| PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, | |
| 1000000000 / (1000 * 20), PWM_POLARITY_NORMAL), | |
| }; | |
| static int smartq_bl_init(struct device *dev) | |
| { | |
| s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); | |
| return 0; | |
| } | |
| static struct platform_pwm_backlight_data smartq_backlight_data = { | |
| .max_brightness = 1000, | |
| .dft_brightness = 600, | |
| .enable_gpio = -1, | |
| .init = smartq_bl_init, | |
| }; | |
| static struct platform_device smartq_backlight_device = { | |
| .name = "pwm-backlight", | |
| .dev = { | |
| .parent = &samsung_device_pwm.dev, | |
| .platform_data = &smartq_backlight_data, | |
| }, | |
| }; | |
| static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = { | |
| .delay = 65535, | |
| .presc = 99, | |
| .oversampling_shift = 4, | |
| }; | |
| static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = { | |
| .max_width = 4, | |
| .cd_type = S3C_SDHCI_CD_PERMANENT, | |
| }; | |
| static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = { | |
| /* Battery voltage (?-4.2V) */ | |
| .in[0] = &(struct s3c_hwmon_chcfg) { | |
| .name = "smartq:battery-voltage", | |
| .mult = 3300, | |
| .div = 2048, | |
| }, | |
| /* Reference voltage (1.2V) */ | |
| .in[1] = &(struct s3c_hwmon_chcfg) { | |
| .name = "smartq:reference-voltage", | |
| .mult = 3300, | |
| .div = 4096, | |
| }, | |
| }; | |
| static struct dwc2_hsotg_plat smartq_hsotg_pdata; | |
| static int __init smartq_lcd_setup_gpio(void) | |
| { | |
| int ret; | |
| ret = gpio_request(S3C64XX_GPM(3), "LCD power"); | |
| if (ret < 0) | |
| return ret; | |
| /* turn power off */ | |
| gpio_direction_output(S3C64XX_GPM(3), 0); | |
| return 0; | |
| } | |
| /* GPM0 -> CS */ | |
| static struct spi_gpio_platform_data smartq_lcd_control = { | |
| .sck = S3C64XX_GPM(1), | |
| .mosi = S3C64XX_GPM(2), | |
| .miso = S3C64XX_GPM(2), | |
| }; | |
| static struct platform_device smartq_lcd_control_device = { | |
| .name = "spi-gpio", | |
| .id = 1, | |
| .dev.platform_data = &smartq_lcd_control, | |
| }; | |
| static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) | |
| { | |
| gpio_direction_output(S3C64XX_GPM(3), power); | |
| } | |
| static struct plat_lcd_data smartq_lcd_power_data = { | |
| .set_power = smartq_lcd_power_set, | |
| }; | |
| static struct platform_device smartq_lcd_power_device = { | |
| .name = "platform-lcd", | |
| .dev.parent = &s3c_device_fb.dev, | |
| .dev.platform_data = &smartq_lcd_power_data, | |
| }; | |
| static struct i2c_board_info smartq_i2c_devs[] __initdata = { | |
| { I2C_BOARD_INFO("wm8987", 0x1a), }, | |
| }; | |
| static struct platform_device *smartq_devices[] __initdata = { | |
| &s3c_device_hsmmc1, /* Init iNAND first, ... */ | |
| &s3c_device_hsmmc0, /* ... then the external SD card */ | |
| &s3c_device_hsmmc2, | |
| &s3c_device_adc, | |
| &s3c_device_fb, | |
| &s3c_device_hwmon, | |
| &s3c_device_i2c0, | |
| &s3c_device_ohci, | |
| &s3c_device_rtc, | |
| &samsung_device_pwm, | |
| &s3c_device_usb_hsotg, | |
| &s3c64xx_device_iis0, | |
| &smartq_backlight_device, | |
| &smartq_lcd_control_device, | |
| &smartq_lcd_power_device, | |
| &smartq_usb_otg_vbus_dev, | |
| }; | |
| static void __init smartq_lcd_mode_set(void) | |
| { | |
| u32 tmp; | |
| /* set the LCD type */ | |
| tmp = __raw_readl(S3C64XX_SPCON); | |
| tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; | |
| tmp |= S3C64XX_SPCON_LCD_SEL_RGB; | |
| __raw_writel(tmp, S3C64XX_SPCON); | |
| /* remove the LCD bypass */ | |
| tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); | |
| tmp &= ~MIFPCON_LCD_BYPASS; | |
| __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); | |
| } | |
| static void smartq_power_off(void) | |
| { | |
| gpio_direction_output(S3C64XX_GPK(15), 1); | |
| } | |
| static int __init smartq_power_off_init(void) | |
| { | |
| int ret; | |
| ret = gpio_request(S3C64XX_GPK(15), "Power control"); | |
| if (ret < 0) { | |
| pr_err("%s: failed to get GPK15\n", __func__); | |
| return ret; | |
| } | |
| /* leave power on */ | |
| gpio_direction_output(S3C64XX_GPK(15), 0); | |
| pm_power_off = smartq_power_off; | |
| return ret; | |
| } | |
| static int __init smartq_usb_host_init(void) | |
| { | |
| int ret; | |
| ret = gpio_request(S3C64XX_GPL(0), "USB power control"); | |
| if (ret < 0) { | |
| pr_err("%s: failed to get GPL0\n", __func__); | |
| return ret; | |
| } | |
| ret = gpio_request(S3C64XX_GPL(1), "USB host power control"); | |
| if (ret < 0) { | |
| pr_err("%s: failed to get GPL1\n", __func__); | |
| goto err; | |
| } | |
| if (!machine_is_smartq5()) { | |
| /* This isn't present on a SmartQ 5 board */ | |
| ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent"); | |
| if (ret < 0) { | |
| pr_err("%s: failed to get GPL10\n", __func__); | |
| goto err2; | |
| } | |
| } | |
| /* turn power off */ | |
| gpio_direction_output(S3C64XX_GPL(0), 0); | |
| gpio_direction_output(S3C64XX_GPL(1), 0); | |
| if (!machine_is_smartq5()) | |
| gpio_direction_input(S3C64XX_GPL(10)); | |
| s3c_device_ohci.dev.platform_data = &smartq_usb_host_info; | |
| return 0; | |
| err2: | |
| gpio_free(S3C64XX_GPL(1)); | |
| err: | |
| gpio_free(S3C64XX_GPL(0)); | |
| return ret; | |
| } | |
| static int __init smartq_wifi_init(void) | |
| { | |
| int ret; | |
| ret = gpio_request(S3C64XX_GPK(1), "wifi control"); | |
| if (ret < 0) { | |
| pr_err("%s: failed to get GPK1\n", __func__); | |
| return ret; | |
| } | |
| ret = gpio_request(S3C64XX_GPK(2), "wifi reset"); | |
| if (ret < 0) { | |
| pr_err("%s: failed to get GPK2\n", __func__); | |
| gpio_free(S3C64XX_GPK(1)); | |
| return ret; | |
| } | |
| /* turn power on */ | |
| gpio_direction_output(S3C64XX_GPK(1), 1); | |
| /* reset device */ | |
| gpio_direction_output(S3C64XX_GPK(2), 0); | |
| mdelay(100); | |
| gpio_set_value(S3C64XX_GPK(2), 1); | |
| gpio_direction_input(S3C64XX_GPK(2)); | |
| return 0; | |
| } | |
| static struct map_desc smartq_iodesc[] __initdata = {}; | |
| void __init smartq_map_io(void) | |
| { | |
| s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); | |
| s3c64xx_set_xtal_freq(12000000); | |
| s3c64xx_set_xusbxti_freq(12000000); | |
| s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); | |
| samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); | |
| smartq_lcd_mode_set(); | |
| } | |
| static struct gpiod_lookup_table smartq_audio_gpios = { | |
| .dev_id = "smartq-audio", | |
| .table = { | |
| GPIO_LOOKUP("GPL", 12, "headphone detect", 0), | |
| GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0), | |
| { }, | |
| }, | |
| }; | |
| void __init smartq_machine_init(void) | |
| { | |
| s3c_i2c0_set_platdata(NULL); | |
| dwc2_hsotg_set_platdata(&smartq_hsotg_pdata); | |
| s3c_hwmon_set_platdata(&smartq_hwmon_pdata); | |
| s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata); | |
| s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); | |
| s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata); | |
| i2c_register_board_info(0, smartq_i2c_devs, | |
| ARRAY_SIZE(smartq_i2c_devs)); | |
| WARN_ON(smartq_lcd_setup_gpio()); | |
| WARN_ON(smartq_power_off_init()); | |
| WARN_ON(smartq_usb_host_init()); | |
| WARN_ON(smartq_wifi_init()); | |
| pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup)); | |
| platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); | |
| gpiod_add_lookup_table(&smartq_audio_gpios); | |
| platform_device_register_simple("smartq-audio", -1, NULL, 0); | |
| } |