drivers/leds/leds-lp5521.c: perform SW reset before detection
Chip detection may fail if the chip is in some odd state for example after
system restart. Chip doesn't have HW reset line.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 963c014b..33facd0 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -245,13 +245,6 @@
lp5521_init_engine(chip, attr_group);
- lp5521_write(client, LP5521_REG_RESET, 0xff);
-
- usleep_range(10000, 20000); /*
- * Exact value is not available. 10 - 20ms
- * appears to be enough for reset.
- */
-
/* Set all PWMs to direct control mode */
ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
@@ -716,6 +709,11 @@
usleep_range(1000, 2000); /* 500us abs min. */
}
+ lp5521_write(client, LP5521_REG_RESET, 0xff);
+ usleep_range(10000, 20000); /*
+ * Exact value is not available. 10 - 20ms
+ * appears to be enough for reset.
+ */
ret = lp5521_detect(client);
if (ret) {
