starfire: Move the Adaptec driver
Move the Adaptec driver into drivers/net/ethernet/adaptec/ and make
the necessary Kconfig and Makefile changes.
CC: Ion Badulescu <ionut@badula.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index ca3ec84..8ca886e3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6262,7 +6262,7 @@
STARFIRE/DURALAN NETWORK DRIVER
M: Ion Badulescu <ionut@badula.org>
S: Odd Fixes
-F: drivers/net/starfire*
+F: drivers/net/ethernet/adaptec/starfire*
SUN3/3X
M: Sam Creasey <sammy@sammy.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c7953ad..e6e10a4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -345,20 +345,6 @@
will be asked for your specific card in the following questions. If
you are unsure, say Y.
-config ADAPTEC_STARFIRE
- tristate "Adaptec Starfire/DuraLAN support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
- adapter. The DuraLAN chip is used on the 64 bit PCI boards from
- Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
- driver.
-
- To compile this driver as a module, choose M here: the module
- will be called starfire. This is recommended.
-
config NET_POCKET
bool "Pocket and portable adapters"
depends on PARPORT
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4d5af15..670e175 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -17,7 +17,6 @@
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_SKFP) += skfp/
-obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_SH_ETH) += sh_eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 1de8edc..8cd38c9 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -12,6 +12,7 @@
if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/adaptec/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/atheros/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 3d5ed1f..50e040c 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
+obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig
new file mode 100644
index 0000000..5e9dbe9
--- /dev/null
+++ b/drivers/net/ethernet/adaptec/Kconfig
@@ -0,0 +1,34 @@
+#
+# Adaptec network device configuration
+#
+
+config NET_VENDOR_ADAPTEC
+ bool "Adaptec devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Adaptec cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_ADAPTEC
+
+config ADAPTEC_STARFIRE
+ tristate "Adaptec Starfire/DuraLAN support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
+ adapter. The DuraLAN chip is used on the 64 bit PCI boards from
+ Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
+ driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called starfire. This is recommended.
+
+endif # NET_VENDOR_ADAPTEC
diff --git a/drivers/net/ethernet/adaptec/Makefile b/drivers/net/ethernet/adaptec/Makefile
new file mode 100644
index 0000000..6c07b75
--- /dev/null
+++ b/drivers/net/ethernet/adaptec/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Adaptec network device drivers.
+#
+
+obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
diff --git a/drivers/net/starfire.c b/drivers/net/ethernet/adaptec/starfire.c
similarity index 100%
rename from drivers/net/starfire.c
rename to drivers/net/ethernet/adaptec/starfire.c
