[SCSI] move the mid-layer printk's over to shost/starget/sdev_printk
This should eliminate (at least in the mid layer) to make numeric
assumptions about any of the enumeration variables. As a side effect,
it will also make all the messages consistent and line us up nicely for
the error logging strategy (if it ever shows itself again).
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index ef577c8..718a2bc 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -33,8 +33,6 @@
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_spi.h>
-#define SPI_PRINTK(x, l, f, a...) dev_printk(l, &(x)->dev, f , ##a)
-
#define SPI_NUM_ATTRS 14 /* increase this if you add attributes */
#define SPI_OTHER_ATTRS 1 /* Increase this if you add "always
* on" attributes */
@@ -618,7 +616,7 @@
return SPI_COMPARE_SKIP_TEST;
- SPI_PRINTK(sdev->sdev_target, KERN_ERR, "Write Buffer failure %x\n", result);
+ sdev_printk(KERN_ERR, sdev, "Write Buffer failure %x\n", result);
return SPI_COMPARE_FAILURE;
}
@@ -702,10 +700,10 @@
* IU, then QAS (if we can control them), then finally
* fall down the periods */
if (i->f->set_iu && spi_iu(starget)) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Disabing Information Units\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabing Information Units\n");
DV_SET(iu, 0);
} else if (i->f->set_qas && spi_qas(starget)) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Disabing Quick Arbitration and Selection\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabing Quick Arbitration and Selection\n");
DV_SET(qas, 0);
} else {
newperiod = spi_period(starget);
@@ -717,11 +715,11 @@
if (unlikely(period > 0xff || period == prevperiod)) {
/* Total failure; set to async and return */
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Failure, dropping back to Asynchronous\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Failure, dropping back to Asynchronous\n");
DV_SET(offset, 0);
return SPI_COMPARE_FAILURE;
}
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation detected failure, dropping back\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation detected failure, dropping back\n");
DV_SET(period, period);
prevperiod = period;
}
@@ -788,7 +786,7 @@
if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Initial Inquiry Failed\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
/* FIXME: should probably offline the device here? */
return;
}
@@ -802,7 +800,7 @@
buffer + len,
DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
- SPI_PRINTK(starget, KERN_ERR, "Wide Transfers Fail\n");
+ starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
}
}
@@ -844,14 +842,14 @@
}
if (len == 0) {
- SPI_PRINTK(starget, KERN_INFO, "Domain Validation skipping write tests\n");
+ starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
spi_dv_retrain(sdev, buffer, buffer + len,
spi_dv_device_compare_inquiry);
return;
}
if (len > SPI_MAX_ECHO_BUFFER_SIZE) {
- SPI_PRINTK(starget, KERN_WARNING, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
+ starget_printk(KERN_WARNING, starget, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
len = SPI_MAX_ECHO_BUFFER_SIZE;
}
@@ -902,11 +900,11 @@
spi_dv_pending(starget) = 1;
down(&spi_dv_sem(starget));
- SPI_PRINTK(starget, KERN_INFO, "Beginning Domain Validation\n");
+ starget_printk(KERN_INFO, starget, "Beginning Domain Validation\n");
spi_dv_device_internal(sdev, buffer);
- SPI_PRINTK(starget, KERN_INFO, "Ending Domain Validation\n");
+ starget_printk(KERN_INFO, starget, "Ending Domain Validation\n");
up(&spi_dv_sem(starget));
spi_dv_pending(starget) = 0;
