dts, kbuild: Factor out dtbs install rules to Makefile.dtbinst
Move dtbs install rules to Makefile.dtbinst. This change is needed to
implement support for dts vendor subdirs. The change makes Makefiles
easier and smaller as no longer the dtbs_install rule needs to be
defined. Another advantage is that install goals are not encoded in
targets anymore (%.dtb_dtbinst_).
Signed-off-by: Robert Richter <rrichter@cavium.com>
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 034a949..c81e067 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -312,9 +312,13 @@
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
PHONY += dtbs dtbs_install
-dtbs dtbs_install: prepare scripts
+
+dtbs: prepare scripts
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(boot)/dts MACHINE=$(MACHINE)
+
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89ca..e0d348b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -527,5 +527,3 @@
$(Q)rm -f $(obj)/../*.dtb
clean-files := *.dtb
-
-dtbs_install: $(addsuffix _dtbinst_, $(dtb-y))
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index a963b3a..8e9167a 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -71,9 +71,13 @@
$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
PHONY += dtbs dtbs_install
-dtbs dtbs_install: prepare scripts
+
+dtbs: prepare scripts
$(Q)$(MAKE) $(build)=$(boot)/dts $@
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
+
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 3a75cdc..29ac5ad 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -8,5 +8,3 @@
dtbs: $(addprefix $(obj)/, $(dtb-y))
clean-files := *.dtb
-
-dtbs_install: $(addsuffix _dtbinst_, $(dtb-y))
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 65e7b08..5374b1b 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -179,6 +179,12 @@
# $(Q)$(MAKE) $(modbuiltin)=dir
modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
+# Usage:
+# $(Q)$(MAKE) $(dtbinst)=dir
+dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj
+
# Prefix -I with $(srctree) if it is not an absolute path.
# skip if -I has no parameter
addtree = $(if $(patsubst -I%,%,$(1)), \
diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst
new file mode 100644
index 0000000..54286cc
--- /dev/null
+++ b/scripts/Makefile.dtbinst
@@ -0,0 +1,38 @@
+# ==========================================================================
+# Installing dtb files
+#
+# Installs all dtb files listed in $(dtb-y) either in the
+# INSTALL_DTBS_PATH directory or the default location:
+#
+# $INSTALL_PATH/dtbs/$KERNELRELEASE
+#
+# ==========================================================================
+
+src := $(obj)
+
+PHONY := __dtbs_install
+__dtbs_install:
+
+include include/config/auto.conf
+include scripts/Kbuild.include
+include $(srctree)/$(obj)/Makefile
+
+PHONY += __dtbs_install_prep
+__dtbs_install_prep:
+ $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi
+ $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi
+ $(Q)mkdir -p $(INSTALL_DTBS_PATH)
+
+dtbinst-files := $(dtb-y)
+
+# Helper targets for Installing DTBs into the boot directory
+quiet_cmd_dtb_install = INSTALL $<
+ cmd_dtb_install = cp $< $(2)
+
+$(dtbinst-files): %.dtb: $(obj)/%.dtb | __dtbs_install_prep
+ $(call cmd,dtb_install,$(INSTALL_DTBS_PATH))
+
+PHONY += $(dtbinst-files)
+__dtbs_install: $(dtbinst-files)
+
+.PHONY: $(PHONY)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 54be19a..5117552 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -283,18 +283,6 @@
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
-# Helper targets for Installing DTBs into the boot directory
-quiet_cmd_dtb_install = INSTALL $<
- cmd_dtb_install = cp $< $(2)
-
-_dtbinst_pre_:
- $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi
- $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi
- $(Q)mkdir -p $(INSTALL_DTBS_PATH)
-
-%.dtb_dtbinst_: $(obj)/%.dtb _dtbinst_pre_
- $(call cmd,dtb_install,$(INSTALL_DTBS_PATH))
-
# Bzip2
# ---------------------------------------------------------------------------
