wl1271: update radio and general parameters values
There were some changes in the values we have to use for these settings. This
patches updates them.
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 7ab45c4..1d5b73c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -256,7 +256,7 @@
.clk_valid_on_wakeup = 0,
.dc2dcmode = 0,
.single_dual_band = CONF_SINGLE_BAND,
- .tx_bip_fem_autodetect = 0,
+ .tx_bip_fem_autodetect = 1,
.tx_bip_fem_manufacturer = 1,
.settings = 1,
.sr_state = 1,
@@ -274,8 +274,8 @@
.sr_sen_prn = 0,
},
.radioparam = {
- .rx_trace_loss = 10,
- .tx_trace_loss = 10,
+ .rx_trace_loss = 0x24,
+ .tx_trace_loss = 0x0,
.rx_rssi_and_proc_compens = {
0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
@@ -286,13 +286,13 @@
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00 },
- .tx_ref_pd_voltage = 0x24e,
- .tx_ref_power = 0x78,
+ .tx_ref_pd_voltage = 0x1a9,
+ .tx_ref_power = 0x80,
.tx_offset_db = 0x0,
.tx_rate_limits_normal = {
- 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 },
+ 0x1d, 0x1f, 0x24, 0x28, 0x28, 0x29 },
.tx_rate_limits_degraded = {
- 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
+ 0x19, 0x1f, 0x22, 0x23, 0x27, 0x28 },
.tx_channel_limits_11b = {
0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
@@ -302,10 +302,10 @@
0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
0x20, 0x50 },
.tx_pdv_rate_offsets = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ 0x07, 0x08, 0x04, 0x02, 0x02, 0x00 },
.tx_ibias = {
- 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 },
- .rx_fem_insertion_loss = 0x14,
+ 0x11, 0x11, 0x15, 0x11, 0x15, 0x0f },
+ .rx_fem_insertion_loss = 0x0e,
.tx_ref_pd_voltage_5 = {
0x0190, 0x01a4, 0x01c3, 0x01d8,
0x020a, 0x021c },
