blob: 13b02b7de30b3f0e82d47ffbaa5824bf212a6f15 [file] [log] [blame]
/*
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef UFS_QCOM_PHY_I_H_
#define UFS_QCOM_PHY_I_H_
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/phy/phy-qcom-ufs.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
({ \
ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
might_sleep_if(timeout_us); \
for (;;) { \
(val) = readl(addr); \
if (cond) \
break; \
if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
(val) = readl(addr); \
break; \
} \
if (sleep_us) \
usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
} \
(cond) ? 0 : -ETIMEDOUT; \
})
#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
{ \
.reg_offset = reg, \
.cfg_value = val, \
}
#define UFS_QCOM_PHY_NAME_LEN 30
enum {
MASK_SERDES_START = 0x1,
MASK_PCS_READY = 0x1,
};
enum {
OFFSET_SERDES_START = 0x0,
};
struct ufs_qcom_phy_stored_attributes {
u32 att;
u32 value;
};
struct ufs_qcom_phy_calibration {
u32 reg_offset;
u32 cfg_value;
};
struct ufs_qcom_phy_vreg {
const char *name;
struct regulator *reg;
int max_uA;
int min_uV;
int max_uV;
bool enabled;
};
struct ufs_qcom_phy {
struct list_head list;
struct device *dev;
void __iomem *mmio;
void __iomem *dev_ref_clk_ctrl_mmio;
struct clk *tx_iface_clk;
struct clk *rx_iface_clk;
bool is_iface_clk_enabled;
struct clk *ref_clk_src;
struct clk *ref_clk_parent;
struct clk *ref_clk;
bool is_ref_clk_enabled;
bool is_dev_ref_clk_enabled;
struct ufs_qcom_phy_vreg vdda_pll;
struct ufs_qcom_phy_vreg vdda_phy;
struct ufs_qcom_phy_vreg vddp_ref_clk;
unsigned int quirks;
/*
* If UFS link is put into Hibern8 and if UFS PHY analog hardware is
* power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
* exit might fail even after powering on UFS PHY analog hardware.
* Enabling this quirk will help to solve above issue by doing
* custom PHY settings just before PHY analog power collapse.
*/
#define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0)
u8 host_ctrl_rev_major;
u16 host_ctrl_rev_minor;
u16 host_ctrl_rev_step;
char name[UFS_QCOM_PHY_NAME_LEN];
struct ufs_qcom_phy_calibration *cached_regs;
int cached_regs_table_size;
bool is_powered_on;
struct ufs_qcom_phy_specific_ops *phy_spec_ops;
};
/**
* struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
* specific implementation per phy. Each UFS phy, should implement
* those functions according to its spec and requirements
* @calibrate_phy: pointer to a function that calibrate the phy
* @start_serdes: pointer to a function that starts the serdes
* @is_physical_coding_sublayer_ready: pointer to a function that
* checks pcs readiness. returns 0 for success and non-zero for error.
* @set_tx_lane_enable: pointer to a function that enable tx lanes
* @power_control: pointer to a function that controls analog rail of phy
* and writes to QSERDES_RX_SIGDET_CNTRL attribute
*/
struct ufs_qcom_phy_specific_ops {
int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
void (*start_serdes)(struct ufs_qcom_phy *phy);
int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
void (*power_control)(struct ufs_qcom_phy *phy, bool val);
};
struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
int ufs_qcom_phy_power_on(struct phy *generic_phy);
int ufs_qcom_phy_power_off(struct phy *generic_phy);
int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common);
int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common);
int ufs_qcom_phy_remove(struct phy *generic_phy,
struct ufs_qcom_phy *ufs_qcom_phy);
struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
struct ufs_qcom_phy *common_cfg,
const struct phy_ops *ufs_qcom_phy_gen_ops,
struct ufs_qcom_phy_specific_ops *phy_spec_ops);
int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
bool is_rate_B);
#endif